small changes

Reviewed-on: artix/artools#69

Makefile

@@ -1,11 +1,10 @@
-VERSION=0.22
+V=0.28
 
 TOOLS = artools
 PREFIX ?= /usr
 SYSCONFDIR = /etc
 BINDIR = $(PREFIX)/bin
 DATADIR = $(PREFIX)/share
-CPIODIR = $(SYSCONFDIR)/initcpio
 
 BASE_CONF = \
 	data/conf/artools-base.conf
@@ -23,6 +22,8 @@ BASE_DATA = \
 PKG_CONF = \
 	data/conf/artools-pkg.conf
 
+SETARCH_ALIASES = \
+
 PKG_BIN = \
 	bin/pkg/buildpkg \
 	bin/pkg/deploypkg \
@@ -38,7 +39,13 @@ PKG_BIN = \
 	bin/pkg/find-libdeps \
 	bin/pkg/batchpkg \
 	bin/pkg/signpkg \
-	bin/pkg/checkrepo
+	bin/pkg/checkrepo \
+	bin/pkg/gitearepo \
+	bin/pkg/tidyarch \
+	bin/pkg/mkdepgraph \
+	bin/pkg/diffpkg \
+	bin/pkg/makerepropkg \
+	bin/pkg/export-pkgbuild-keys
 
 LN_COMMITPKG = \
 	extrapkg \
@@ -69,20 +76,6 @@ LN_BUILDPKG = \
 	buildpkg-kde-wobble \
 	buildpkg-gnome-wobble
 
-LN_DEPLOYPKG = \
-	deploypkg-system \
-	deploypkg-world \
-	deploypkg-gremlins \
-	deploypkg-goblins \
-	deploypkg-galaxy \
-	deploypkg-galaxy-gremlins \
-	deploypkg-galaxy-goblins \
-	deploypkg-lib32 \
-	deploypkg-lib32-gremlins \
-	deploypkg-lib32-goblins \
-	deploypkg-kde-wobble \
-	deploypkg-gnome-wobble
-
 PKG_DATA = \
 	data/pacman/makepkg.conf \
 	data/valid-names.conf
@@ -105,7 +98,7 @@ FILEMODE = -m0644
 MODE =  -m0755
 LN = ln -sf
 RM = rm -f
-M4 = m4 -P
+M4 = m4 -P --define=m4_artools_pkg_version=$V
 CHMODAW = chmod a-w
 CHMODX = chmod +x
 
@@ -137,6 +130,9 @@ install_base:
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
 	install $(FILEMODE) $(BASE_DATA) $(DESTDIR)$(DATADIR)/$(TOOLS)
 
+	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/setarch-aliases.d
+	for a in ${SETARCH_ALIASES}; do install $(FILEMODE) setarch-aliases.d/$$a $(DESTDIR)$(DATADIR)/$(TOOLS)/setarch-aliases.d; done
+
 install_pkg:
 	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 	install $(FILEMODE) $(PKG_CONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
@@ -150,9 +146,6 @@ install_pkg:
 
 	for l in $(LN_COMMITPKG); do $(LN) commitpkg $(DESTDIR)$(BINDIR)/$$l; done
 	for l in $(LN_BUILDPKG); do $(LN) buildpkg $(DESTDIR)$(BINDIR)/$$l; done
-	for l in $(LN_DEPLOYPKG); do $(LN) deploypkg $(DESTDIR)$(BINDIR)/$$l; done
-
-	$(LN) artix-chroot $(DESTDIR)$(BINDIR)/artools-chroot
 
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
 	install $(FILEMODE) $(PKG_DATA) $(DESTDIR)$(DATADIR)/$(TOOLS)
@@ -160,10 +153,7 @@ install_pkg:
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
 	install $(FILEMODE) $(PATCHES) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
 
-install_cpio:
-	+make CPIODIR=$(CPIODIR) DESTDIR=$(DESTDIR) -C initcpio install
-
-install_iso: install_cpio
+install_iso:
 	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 	install $(FILEMODE) $(ISO_CONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 

README.md

@@ -18,23 +18,18 @@ artools
 ##### Runtime:
 
 - base:
-  * openssh
-  * rsync
-  * haveged
   * os-prober
-  * gnupg
   * pacman
 
 - pkg:
   * namcap
-  * git-subrepo
-  * jq
+  * ruby-braid
+  * rsync
 
 - iso:
   * dosfstools
   * libisoburn
   * squashfs-tools
-  * mkinitcpio
   * grub
 
 #### Configuration

bin/base/artix-chroot.in

@@ -18,134 +18,34 @@ m4_include(lib/base/message.sh)
 m4_include(lib/base/chroot.sh)
 m4_include(lib/base/mount.sh)
 
-#{{{ functions
-
-chroot_part_mount() {
-    msg2 "mount: [%s]" "$2"
-    mount "$@" && CHROOT_ACTIVE_PART_MOUNTS=("$2" "${CHROOT_ACTIVE_PART_MOUNTS[@]}")
-}
-
-chroot_part_umount() {
-    chroot_api_umount
-    msg2 "umount: [%s]" "${CHROOT_ACTIVE_PART_MOUNTS[@]}"
-    umount "${CHROOT_ACTIVE_PART_MOUNTS[@]}"
-    unset CHROOT_ACTIVE_PART_MOUNTS
-}
-
-detect(){
-    local detected
-    detected="$(os-prober | tr ' ' '_' | paste -s -d ' ')"
-    echo "${detected}"
-}
-
-# $1: os-prober array
-get_os_name(){
-    local str=$1
-    str="${str#*:}"
-    str="${str#*:}"
-    str="${str%:*}"
-    echo "$str"
-}
-
-mount_os(){
-    CHROOT_ACTIVE_PART_MOUNTS=()
-    CHROOT_ACTIVE_MOUNTS=()
-
-    trap_setup chroot_part_umount
-
-    chroot_part_mount "$2" "$1"
-
-    local mounts
-    mounts=$(perl -ane 'printf("%s:%s\n", @F[0,1]) if $F[0] =~ m#^UUID=#;' "$1"/etc/fstab)
-
-    for entry in ${mounts}; do
-        entry=${entry//UUID=}
-        local dev=${entry%:*} mp=${entry#*:}
-        case "${entry#*:}" in
-            '/'|'swap'|'none') continue ;;
-            *) chroot_part_mount "/dev/disk/by-uuid/${dev}" "$1${mp}" ;;
-        esac
-    done
-
-    chroot_setup "$1" true
-    chroot_add_resolv_conf "$1"
-}
-
-select_os(){
-    local os_list=( "$(detect)" ) count=${#os_list[@]}
-    if [[ ${count} -gt 1 ]];then
-        msg "Detected systems:"
-        local i=0
-        for os in "${os_list[@]}"; do
-            local last=${os##*:}
-            case $last in
-                'efi') count=$((count-1)) ;;
-                *) msg2 "$i) $(get_os_name "$os")"; i=$((i+1)) ;;
-            esac
-        done
-        i=0
-        msg "Select system to mount [0-%s] : " "$((count-1))"
-        read -r select
-    else
-        select=0
-    fi
-    local os_str=${os_list[$select]} type
-    type=$os_str
-    root=${os_str%%:*}
-    type=${type##*:}
-    if [[ "${type##*:}" == 'linux' ]];then
-        msg "Mounting (%s) [%s]" "$(get_os_name "$os_str")" "$root"
-        mount_os "$1" "$root"
-    else
-        die "You can't mount %s!" "$select"
-    fi
-}
-
-#}}}
-
-automount=false
 
 usage() {
-    echo "usage: ${0##*/} -a [or] ${0##*/} chroot-dir [command]"
-    echo '    -a             Automount detected linux system'
-    echo '    -h             Print this help message'
-    echo ''
-    echo "    If 'command' is unspecified, ${0##*/} will launch /bin/sh."
-    echo ''
-    echo "    If 'automount' is true, ${0##*/} will launch /bin/bash"
-    echo "    and ${chrootdir}."
-    echo ''
-    echo ''
+    printf 'usage: %s chroot-dir [command]\n' "${0##*/}"
+    printf '    -h             Print this help message\n'
+    printf '\n'
+    printf "    If 'command' is unspecified, %s will launch /bin/sh.\n" "${0##*/}"
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
-opts=':ha'
+opts=':h'
 
 while getopts ${opts} arg; do
     case "${arg}" in
-        a) automount=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument ${arg}"; usage 1 ;;
     esac
 done
 shift $(( OPTIND - 1 ))
 
 check_root
 
-if ${automount};then
-    chrootdir=/mnt
-    run_args=(/bin/bash)
+chrootdir=$1
+shift
 
-    select_os "${chrootdir}"
-else
-    chrootdir=$1
-    shift
-    run_args=("$@")
+[[ -d ${chrootdir} ]] || die "Can't create chroot on non-directory %s" "${chrootdir}"
 
-    [[ -d ${chrootdir} ]] || die "Can't create chroot on non-directory %s" "${chrootdir}"
+chroot_api_mount "${chrootdir}" || die "failed to setup API filesystems in chroot %s" "${chrootdir}"
+chroot_add_resolv_conf "${chrootdir}"
 
-    chroot_api_mount "${chrootdir}" || die "failed to setup API filesystems in chroot %s" "${chrootdir}"
-    chroot_add_resolv_conf "${chrootdir}"
-fi
-
-SHELL=/bin/sh unshare --fork --pid chroot "${chrootdir}" "${run_args[@]}"
+SHELL=/bin/sh unshare --fork --pid chroot "${chrootdir}" "$@"

bin/base/basestrap.in

@@ -55,19 +55,19 @@ copymirrorlist=1
 pacmode=-Sy
 
 usage() {
-    echo "usage: ${0##*/} [options] root [packages...]"
-    echo " -C <config>      Use an alternate config file for pacman"
-    echo " -c               Use the package cache on the host, rather than the target"
-    echo " -G               Avoid copying the host's pacman keyring to the target"
-    echo " -i               Avoid auto-confirmation of package selections"
-    echo " -M               Avoid copying the host's mirrorlist to the target"
-    echo ' -U               Use pacman -U to install packages'
-    echo " -h               Print this help message"
-    echo ''
-    echo ' basestrap installs packages to the specified new root directory.'
-    echo ' If no packages are given, basestrap defaults to the "base" group.'
-    echo ''
-    echo ''
+    printf "usage: %s [options] root [packages...]\n" "${0##*/}"
+    printf " -C <config>      Use an alternate config file for pacman\n"
+    printf " -c               Use the package cache on the host, rather than the target\n"
+    printf " -G               Avoid copying the host's pacman keyring to the target\n"
+    printf " -i               Avoid auto-confirmation of package selections\n"
+    printf " -M               Avoid copying the host's mirrorlist to the target\n"
+    printf ' -U               Use pacman -U to install packages\n'
+    printf " -h               Print this help message\n"
+    printf '\n'
+    printf ' basestrap installs packages to the specified new root directory.\n'
+    printf ' If no packages are given, basestrap defaults to the "base" group.\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -81,8 +81,7 @@ while getopts ${opts} arg; do
         G) copykeyring=0 ;;
         M) copymirrorlist=0 ;;
         U) pacmode=-U ;;
-        :) echo "invalid argument ${arg}:$OPTARG"; usage 1;;
-        ?) usage 0 ;;
+        h|?) usage 0 ;;
     esac
 done
 shift $(( OPTIND - 1 ))

bin/base/chroot-run.in

@@ -32,6 +32,7 @@ kill_chroot_process(){
             fi
         fi
     done
+    sleep 1
 }
 
 # umask might have been changed in /etc/profile
@@ -44,18 +45,18 @@ files=()
 mount_args=("-B:/etc/hosts:/etc/hosts")
 
 usage() {
-    echo "Usage: ${0##*/} [options] working-dir [run arguments]"
-    echo "A wrapper around chroot. Provides support for pacman."
-    echo
-    echo ' options:'
-    echo '    -C <file>     Location of a pacman config file'
-    echo '    -M <file>     Location of a makepkg config file'
-    echo '    -c <dir>      Set pacman cache'
-    echo '    -f <file>     Copy file from the host to the chroot'
-    echo '    -s            Do not run setarch'
-    echo '    -b <list>     Bind mountargs'
-    echo '                  List format [mntarg1:src1:dest1 ... mntargN:srcN:destN]'
-    echo '    -h            This message'
+    printf "Usage: %s [options] working-dir [run arguments]\n" "${0##*/}"
+    printf "A wrapper around chroot. Provides support for pacman.\n"
+    printf '\n'
+    printf ' options:\n'
+    printf '    -C <file>     Location of a pacman config file\n'
+    printf '    -M <file>     Location of a makepkg config file\n'
+    printf '    -c <dir>      Set pacman cache\n'
+    printf '    -f <file>     Copy file from the host to the chroot\n'
+    printf '    -s            Do not run setarch\n'
+    printf '    -b <list>     Bind mountargs\n'
+    printf '                  List format [mntarg1:src1:dest1 ... mntargN:srcN:destN]\n'
+    printf '    -h            This message\n'
     exit 1
 }
 
@@ -70,7 +71,6 @@ while getopts ${opts} arg; do
         s) nosetarch=1 ;;
         b) bindmounts+=("$OPTARG"); mount_args+=(${bindmounts[@]}) ;;
         h|?) usage ;;
-        *) error "invalid argument '$arg'"; usage ;;
     esac
 done
 shift $(( OPTIND - 1 ))
@@ -84,26 +84,24 @@ shift 1
 
 [[ -z $working_dir ]] && die 'Please specify a working directory.'
 
-pacconf_cmd=$(command -v pacman-conf || command -v pacconf)
-
 if (( ${#cache_dirs[@]} == 0 )); then
-    mapfile -t cache_dirs < <($pacconf_cmd --config "${pac_conf:-$working_dir/etc/pacman.conf}" CacheDir)
+    mapfile -t cache_dirs < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" CacheDir)
 fi
 
 # shellcheck disable=2016
-host_mirrors=($("$pacconf_cmd" --repo world Server 2> /dev/null | sed -r 's#(.*/)world/os/.*#\1$repo/os/$arch#'))
+host_mirrors=($(pacman-conf --repo world Server 2> /dev/null | sed -r 's#(.*/)world/os/.*#\1$repo/os/$arch#'))
 
 for host_mirror in "${host_mirrors[@]}"; do
     if [[ $host_mirror == *file://* ]]; then
         # shellcheck disable=2016
-        host_mirror=$(echo "$host_mirror" | sed -r 's#file://(/.*)/\$repo/os/\$arch#\1#g')
+        host_mirror=$(printf "%s\n" "$host_mirror" | sed -r 's#file://(/.*)/\$repo/os/\$arch#\1#g')
         in_array "$host_mirror" "${cache_dirs[@]}" || cache_dirs+=("$host_mirror")
     fi
 done
 
 while read -r line; do
     # shellcheck disable=2016
-    mapfile -t lines < <($pacconf_cmd --config "${pac_conf:-$working_dir/etc/pacman.conf}" \
+    mapfile -t lines < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" \
         --repo "$line" Server | sed -r 's#(.*/)[^/]+/os/.+#\1#')
     for line in "${lines[@]}"; do
         if [[ $line = file://* ]]; then
@@ -111,7 +109,7 @@ while read -r line; do
             in_array "$line" "${cache_dirs[@]}" || cache_dirs+=("$line")
         fi
     done
-done < <("$pacconf_cmd" --config "${pac_conf:-$working_dir/etc/pacman.conf}" --repo-list)
+done < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" --repo-list)
 
 copy_hostconf () {
     unshare --fork --pid gpg --homedir "$working_dir"/etc/pacman.d/gnupg/ --no-permission-warning --quiet --batch --import --import-options import-local-sigs "$(pacman-conf GpgDir)"/pubring.gpg >/dev/null 2>&1
@@ -167,7 +165,13 @@ eval "$(grep '^CARCH=' "$working_dir/etc/makepkg.conf")"
 
 [[ -z $nosetarch ]] || unset CARCH
 
-${CARCH:+setarch "$CARCH"} chroot "${working_dir}" "$@"
+if [[ -f "@datadir@/artools/setarch-aliases.d/${CARCH}" ]]; then
+	read -r set_arch < "@datadir@/artools/setarch-aliases.d/${CARCH}"
+else
+	set_arch="${CARCH}"
+fi
+
+${CARCH:+setarch "${set_arch}"} chroot "${working_dir}" "$@"
 
 ret=$?
 

bin/base/fstabgen.in

@@ -364,23 +364,19 @@ while read -r src target fstype opts fsroot; do
         pass=0
     fi
 
-    if [[ $fsroot != / ]]; then
-        if [[ $fstype = btrfs ]]; then
-            opts+=,subvol=${fsroot#/}
-        else
-            # it's a bind mount
-            src=$(findmnt -funcevo TARGET "$src")$fsroot
-            if [[ $src -ef $target ]]; then
-                # hrmm, this is weird. we're probably looking at a file or directory
-                # that was bound into a chroot from the host machine. Ignore it,
-                # because this won't actually be a valid mount. Worst case, the user
-                # just re-adds it.
-                continue
-            fi
-            fstype=none
-            opts+=,bind
-            pass=0
+    if [[ $fsroot != / && $fstype != btrfs ]]; then
+        # it's a bind mount
+        src=$(findmnt -funcevo TARGET "$src")$fsroot
+        if [[ $src -ef $target ]]; then
+            # hrmm, this is weird. we're probably looking at a file or directory
+            # that was bound into a chroot from the host machine. Ignore it,
+            # because this won't actually be a valid mount. Worst case, the user
+            # just re-adds it.
+            continue
         fi
+        fstype=none
+        opts+=,bind
+        pass=0
     fi
 
     # filesystem quirks

bin/base/mkchroot.in

@@ -23,15 +23,15 @@ files=()
 chroot_args=()
 
 usage() {
-    echo "Usage: ${0##*/} [options] working-dir package-list..."
-    echo ' options:'
-    echo '    -U            Use pacman -U to install packages'
-    echo '    -C <file>     Location of a pacman config file'
-    echo '    -M <file>     Location of a makepkg config file'
-    echo '    -c <dir>      Set pacman cache'
-    echo '    -f <file>     Copy file from the host to the chroot'
-    echo '    -s            Do not run setarch'
-    echo '    -h            This message'
+    printf "Usage: %s [options] working-dir package-list...\n" "${0##*/}"
+    printf ' options:\n'
+    printf '    -U            Use pacman -U to install packages\n'
+    printf '    -C <file>     Location of a pacman config file\n'
+    printf '    -M <file>     Location of a makepkg config file\n'
+    printf '    -c <dir>      Set pacman cache\n'
+    printf '    -f <file>     Copy file from the host to the chroot\n'
+    printf '    -s            Do not run setarch\n'
+    printf '    -h            This message\n'
     exit 1
 }
 
@@ -46,7 +46,6 @@ while getopts ${opts} arg; do
         f) files+=("$OPTARG") ;;
         s) nosetarch=1 ;;
         h|?) usage ;;
-        *) error "invalid argument '%s'" "$arg"; usage ;;
     esac
     if [[ $arg != U ]]; then
         chroot_args+=("-$arg")
@@ -64,10 +63,8 @@ shift 1
 
 [[ -z $working_dir ]] && die 'Please specify a working directory.'
 
-pacconf_cmd=$(command -v pacman-conf || command -v pacconf)
-
 if (( ${#cache_dirs[@]} == 0 )); then
-	mapfile -t cache_dirs < <($pacconf_cmd CacheDir)
+	mapfile -t cache_dirs < <(pacman-conf CacheDir)
 fi
 
 umask 0022
@@ -93,13 +90,13 @@ for f in "${files[@]}"; do
     cp "$f" "$working_dir$f"
 done
 
-basestrap -${umode}Mc ${pacman_conf:+-C "$pacman_conf"} "$working_dir" \
+unshare --mount basestrap -${umode}Mc ${pacman_conf:+-C "$pacman_conf"} "$working_dir" \
     "${cache_dirs[@]/#/--cachedir=}" "$@" || die 'Failed to install all packages'
 
 printf '%s.UTF-8 UTF-8\n' en_US de_DE > "$working_dir/etc/locale.gen"
-echo 'LANG=en_US.UTF-8' > "$working_dir/etc/locale.conf"
-# echo 'KEYMAP=en' > "$working_dir/etc/vconsole.conf"
-echo "${CHROOTVERSION}" > "$working_dir/.artools"
+printf 'LANG=C.UTF-8\n' > "$working_dir/etc/locale.conf"
+# printf 'KEYMAP=en\n' > "$working_dir/etc/vconsole.conf"
+printf "%s\n" "${CHROOTVERSION}" > "$working_dir/.artools"
 
 dbus-uuidgen --ensure="$working_dir"/etc/machine-id
 

bin/iso/buildiso.in

@@ -86,9 +86,9 @@ make_rootfs() {
 
         basestrap "${basestrap_args[@]}" "${rootfs}" "${packages[@]}"
 
-        copy_overlay "${ROOT_OVERLAY}" "${rootfs}"
+        copy_overlay "${root_overlay}" "${rootfs}"
 
-        [[ -z ${LIVE_LIST} ]] && configure_chroot "${rootfs}"
+        [[ -z ${live_list} ]] && configure_chroot "${rootfs}"
 
         clean_up_chroot "${rootfs}"
 
@@ -109,7 +109,7 @@ make_livefs() {
 
         basestrap "${basestrap_args[@]}" "${livefs}" "${packages[@]}"
 
-        copy_overlay "${LIVE_OVERLAY}" "${livefs}"
+        copy_overlay "${live_overlay}" "${livefs}"
 
         configure_chroot "${livefs}"
 
@@ -138,7 +138,7 @@ make_bootfs() {
         if "${use_dracut}"; then
             prepare_initramfs_dracut "${bootfs}"
         else
-            prepare_initramfs "${bootfs}"
+            prepare_initramfs_mkinitcpio "${bootfs}"
         fi
 
         umount_overlayfs
@@ -154,14 +154,14 @@ make_grub(){
         msg "Prepare [/iso/boot/grub]"
 
         local layer=${work_dir}/rootfs
-        [[ -n ${LIVE_LIST} ]] && layer=${work_dir}/livefs
+        [[ -n ${live_list} ]] && layer=${work_dir}/livefs
 
         prepare_grub "${work_dir}/rootfs" "$layer"
 
         if ${use_dracut}; then
             configure_grub_dracut
         else
-            configure_grub
+            configure_grub_mkinitcpio
         fi
 
         : > "${work_dir}"/grub.lock
@@ -181,7 +181,7 @@ gen_iso_fn(){
     for n in "${vars[@]}"; do
         name=${name:-}${name:+-}${n}
     done
-    echo "$name"
+    printf "%s\n" "$name"
 }
 
 prepare_build(){
@@ -207,6 +207,10 @@ prepare_build(){
     live_dir=/LiveOS
 
     mnt_dir=${chroots_iso}/${profile}/mnt
+
+    if [[ -n "${GPG_KEY}" ]]; then
+        ${use_dracut} || export_gpg_publickey
+    fi
 }
 
 display_settings(){
@@ -217,6 +221,8 @@ display_settings(){
 
     msg "ISO SETTINGS:"
     msg2 "ISO_VERSION: %s" "${ISO_VERSION}"
+    msg2 "COMPRESSION: %s" "${COMPRESSION}"
+    [[ "${COMPRESSION}" == 'zstd' ]] && msg2 "COMPRESSION_LEVEL: %s" "${COMPRESSION_LEVEL}"
 
     msg "BUILD:"
     show_profile
@@ -248,10 +254,10 @@ mk_boot(){
 }
 
 mk_chroots(){
-    load_pkgs "${ROOT_LIST}" "${INITSYS}"
+    load_pkgs "${root_list}"
     run_safe "make_rootfs"
-    if [[ -n ${LIVE_LIST} ]]; then
-        load_pkgs "${LIVE_LIST}" "${INITSYS}"
+    if [[ -n ${live_list} ]]; then
+        load_pkgs "${live_list}"
         run_safe "make_livefs"
     fi
 }
@@ -319,28 +325,28 @@ chroots_iso="${CHROOTS_DIR}/buildiso"
 arch=$(uname -m)
 
 usage() {
-    echo "Usage: ${cmd} [options]"
-    echo "    -p <profile>       Profile [default: ${profile}]"
-    echo '    -r <dir>           Chroots directory'
-    echo "                       [default: ${chroots_iso}]"
-    echo '    -t <dir>           Target directory'
-    echo "                       [default: ${ISO_POOL}]"
-    echo '    -i <name>          Init system to use'
-    echo "                       [default: ${INITSYS}]"
-    echo '    -g <key>           The gpg key for img signing'
-    echo "                       [default: ${GPG_KEY}]"
-    echo '    -m                 Set SquashFS image mode to persistence'
-    echo '    -c                 Disable clean work dir'
-    echo '    -x                 Build chroot only'
-    echo '    -s                 Squash chroot only'
-    echo '    -b                 Generate iso boot only'
-    echo '    -z                 Generate iso only'
-    echo '                       Requires pre built images (-x)'
-    echo '    -d                 Use dracut instead of mkinitcpio for iso initramfs'
-    echo '    -q                 Query settings and pretend build'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
+    printf 'Usage: %s [options]\n' "${cmd}"
+    printf '    -p <profile>       Profile [default: %s]\n' "${profile}"
+    printf '    -r <dir>           Chroots directory\n'
+    printf '                       [default: %s]\n' "${chroots_iso}"
+    printf '    -t <dir>           Target directory\n'
+    printf '                       [default: %s]\n' "${ISO_POOL}"
+    printf '    -i <name>          Init system to use\n'
+    printf '                       [default: %s]\n' "${INITSYS}"
+    printf '    -g <key>           The gpg key for img signing\n'
+    printf '                       [default: none]\n'
+    printf '    -m                 Set SquashFS image mode to persistence\n'
+    printf '    -c                 Disable clean work dir\n'
+    printf '    -x                 Build chroot only\n'
+    printf '    -s                 Squash chroot only\n'
+    printf '    -b                 Generate iso boot only\n'
+    printf '    -z                 Generate iso only\n'
+    printf '                       Requires pre built images (-x)\n'
+    printf '    -d                 Use dracut instead of mkinitcpio for iso initramfs\n'
+    printf '    -q                 Query settings and pretend build\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -362,7 +368,6 @@ while getopts "${opts}" arg; do
         d) use_dracut=true ;;
         q) pretend=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/batchpkg.in

@@ -28,9 +28,9 @@ batch_move() {
         src=${src#*:}
         local dest=${entry%%:*}
         if ${runlist}; then
-            "${dest}"pkg -s "${src}" -u -p "${pkg}"
+            "${dest}"pkg -s "${src}" -p "${pkg}"
         else
-            msg "%s" "${dest}pkg -s ${src} -u -p ${pkg}"
+            msg "%s" "${dest}pkg -s ${src} -p ${pkg}"
         fi
     done < "$pkglist"
 }
@@ -65,10 +65,10 @@ batch_update() {
         local dest=${entry%:*}
         if ${runlist}; then
             buildtree -i -p "${pkg}"
-            "${dest}"pkg -u -p "${pkg}"
+            "${dest}"pkg -p "${pkg}"
         else
             msg "buildtree -i -p ${pkg}"
-            msg2 "${dest}pkg -u -p ${pkg}"
+            msg2 "${dest}pkg -p ${pkg}"
         fi
     done < "$pkglist"
 }
@@ -76,13 +76,13 @@ batch_update() {
 #}}}
 
 usage() {
-    echo "Usage: ${0##*/} [optional listname]"
-    echo '    -r                 Run generated commands'
-    echo '    -c                 Create subrepos from list'
-    echo '    -u                 Update subrepos from list'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
+    printf 'Usage: %s [optional listname]\n' "${0##*/}"
+    printf '    -r                 Run generated commands\n'
+    printf '    -c                 Create pkgrepos from list\n'
+    printf '    -u                 Update pkgrepos from list\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -98,7 +98,6 @@ while getopts "${opts}" arg; do
         c) create=true ;;
         u) update=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/buildpkg.in

@@ -29,17 +29,17 @@ chroots_pkg="${CHROOTS_DIR}/buildpkg"
 arch=$(uname -m)
 
 usage() {
-    echo "Usage: ${0##*/} [options] -- [mkchrootpkg_args]"
-    echo "    -r <dir>           Create chroots in this directory"
-    echo "    -d <dir>           Destination repo chroot"
-    echo '    -c                 Recreate the chroot before building'
-    echo '    -m                 Major rebuild'
-    echo '    -N                 Disable check() function'
-    echo '    -C                 Run checkpkg after built'
-    echo '    -h                 This help'
-    echo ''
-    echo "Default mkchrootpkg_args args: ${mkchrootpkg_args[*]}"
-    echo ''
+    printf 'Usage: %s [options] -- [mkchrootpkg_args]\n' "${0##*/}"
+    printf '    -r <dir>           Create chroots in this directory\n'
+    printf '    -d <dir>           Destination repo chroot\n'
+    printf '    -c                 Recreate the chroot before building\n'
+    printf '    -m                 Major rebuild\n'
+    printf '    -N                 Disable check() function\n'
+    printf '    -C                 Run checkpkg after built\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf 'Default mkchrootpkg_args args: %s\n' "${mkchrootpkg_args[*]}"
+    printf '\n'
     exit "$1"
 }
 
@@ -54,7 +54,6 @@ while getopts "${opts}" arg; do
         C) mkchrootpkg_args+=(-C) ;;
         N) mkchrootpkg_args+=(-N) ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '%s'" "${arg}"; usage 1 ;;
     esac
 done
 
@@ -72,6 +71,12 @@ get_pacman_conf "${repo}"
 
 get_makepkg_conf
 
+if [[ -f "${DATADIR}/setarch-aliases.d/${arch}" ]]; then
+	read -r set_arch < "${DATADIR}/setarch-aliases.d/${arch}"
+else
+	set_arch="${arch}"
+fi
+
 check_root SOURCE_DATE_EPOCH,SRCDEST,SRCPKGDEST,PKGDEST,LOGDEST,MAKEFLAGS,PACKAGER,GNUPGHOME
 
 mkchrootpkg_args+=("${@:$OPTIND}")
@@ -92,7 +97,7 @@ if ${create_first} || [[ ! -d "${chroots_pkg}/${repo}-${arch}" ]];then
 
     rm -rf --one-file-system "${chroots_pkg}/${repo}-${arch}"
     (umask 0022; mkdir -p "${chroots_pkg}/${repo}-${arch}")
-    setarch "${arch}" mkchroot \
+    setarch "${set_arch}" mkchroot \
         -C "${pacman_conf}" \
         -M "${makepkg_conf}" \
         "${chroots_pkg}/${repo}-${arch}/root" \

bin/pkg/buildtree.in

@@ -15,115 +15,93 @@
 m4_include(lib/util-base.sh)
 m4_include(lib/util-pkg.sh)
 m4_include(lib/base/message.sh)
+m4_include(lib/pkg/common.sh)
 m4_include(lib/pkg/git.sh)
+m4_include(lib/pkg/gitea.sh)
 m4_include(lib/pkg/repo.sh)
 m4_include(lib/pkg/jenkins.sh)
 
 #{{{ new git repo
 
-get_compliant_name(){
-    local gitname="$1"
-    case "$gitname" in
-        *+) gitname=${gitname//+/plus} ;;
-        *+*) gitname=${gitname//+/-} ;;
-    esac
-    echo "$gitname"
-}
-
-subrepo_clone(){
-    local pkg="$1" org="$2" gitname
-    gitname=$(get_compliant_name "$pkg")
-    msg2 "Subrepo clone [%s] from (%s)" "$pkg" "$org/$gitname"
-    git subrepo clone "${GIT_SSH}":"$org"/"$gitname".git "$pkg"
-}
-
-create_repo() {
-    local pkg="$1" org="$2" gitname
-    gitname=$(get_compliant_name "$pkg")
-    local json="{ \"auto_init\": true, \"name\":\"$gitname\", \"gitignores\":\"ArchLinuxPackages\", \"readme\": \"Default\" }"
-
-    msg2 "Create package repo [%s] in org (%s)" "${pkg}" "${org}"
-
-    curl -s -X POST "${GIT_URL}/api/v1/org/$org/repos?access_token=${GIT_TOKEN}" \
-        -H "accept: application/json" \
-        -H "content-type: application/json" \
-        -d "$json"
-
-    echo
-}
-
-subrepo_new(){
+pkgrepo_new(){
     cd "${TREE_DIR_ARTIX}/${group}" || return
 
-    local org
+    local org gitname
     org=$(get_pkg_org "${package}")
+    gitname=$(get_compliant_name "${package}")
 
-    create_repo "${package}" "$org"
+    if [[ ! -d "${package}" ]]; then
+        gitearepo -cr "$gitname"
 
-    add_repo_to_team "${package}" "$org" "${team}"
+        add_team_to_repo "$gitname" "$org" "${team}"
 
-    subrepo_clone "${package}" "$org"
+        msg2 "Adding [%s] from (%s)" "${package}" "$org/$gitname"
+        braid add "${GIT_SSH}":"$org/$gitname".git "${package}"
 
-    mkdir -p "${TREE_DIR_ARTIX}/${group}/${package}/trunk"
+        prepare_dir "${TREE_DIR_ARTIX}/${group}/${package}/trunk"
 
-    commit_jenkins_files "${package}"
+        commit_ci "${package}"
+
+#         if braid push "${package}"; then
+#             braid update "${package}"
+#         fi
+    else
+        die "Package %s already exists!" "${package}"
+    fi
 }
 
 #}}}
 
 #{{{ pull
 
-clone_tree(){
-    local url="$1" tree="$2" os="${3:-Artix}"
-
-    msg "Cloning %s (%s) ..." "$tree" "$os"
-
-    git clone "$url/$tree".git
+config_tree() {
+    local dist="$1" vars="${2:-false}"
+    case "$dist" in
+        Artix)
+            if "$vars"; then
+                dist_tree=("${ARTIX_TREE[@]}")
+                dist_url="${GIT_SSH}:pkgbuild"
+                dist_dir=${TREE_DIR_ARTIX}
+            else
+                git config --bool pull.rebase true
+                git config commit.gpgsign true
+                if [[ -n "${GPGKEY}" ]];then
+                    git config user.signingkey "${GPGKEY}"
+                else
+                    warning "No GPGKEY configured in makepkg.conf!"
+                fi
+            fi
+        ;;
+        Arch)
+            if "$vars"; then
+                dist_tree=("${ARCH_TREE[@]}")
+                dist_url="${HOST_TREE_ARCH}"
+                dist_dir=${TREE_DIR_ARCH}
+            else
+                git config --bool pull.rebase false
+                git config branch.master.mergeoptions --no-edit
+            fi
+        ;;
+    esac
 }
 
-pull_tree_arch(){
-    cd "${TREE_DIR_ARCH}" || return
-    for tree in "${ARCH_TREE[@]}";do
-        if [[ -d "${tree}" ]];then
-            ( cd "${tree}" || return
-                pull_tree "${tree}" "$(get_local_head)" "Arch"
+update_tree() {
+    local dist="${1:-Artix}"
+    config_tree "$dist" true
+    cd "$dist_dir" || return
+    for tree in "${dist_tree[@]}"; do
+        if [[ -d "$tree" ]]; then
+            ( cd "$tree" || return
+                config_tree "$dist"
+                msg "Checking (%s) (%s)" "$tree" "$dist"
+                pull_tree "$tree" "$(get_local_head)"
             )
         else
-            clone_tree "${HOST_TREE_ARCH}" "${tree}" "Arch"
-        fi
-    done
-}
-
-config_tree(){
-    local tree="$1"
-    cd "$tree" || return
-        git config --bool pull.rebase true
-        git config commit.gpgsign true
-        if [[ -n "${GPGKEY}" ]];then
-            git config user.signingkey "${GPGKEY}"
-        else
-            warning "No GPGKEY configured in makepkg.conf!"
-        fi
-    cd ..
-}
-
-pull_tree_artix(){
-    local repos=()
-    if ${sync_group}; then
-        repos=("${group}")
-    else
-        repos=("${ARTIX_TREE[@]}")
-    fi
-    cd "${TREE_DIR_ARTIX}" || return
-    for tree in "${repos[@]}"; do
-        if [[ -d "${tree}" ]];then
-            config_tree "${tree}"
-            ( cd "${tree}" || return
-                pull_tree "${tree}" "$(get_local_head)"
+            msg "Cloning (%s) (%s) ..." "$tree" "$dist"
+            git clone "$dist_url/$tree".git
+            ( cd "$tree" || return
+                config_tree "$dist"
             )
-        else
-            clone_tree "${host_tree_artix}" "${tree}"
-            config_tree "${tree}"
         fi
     done
 }
@@ -132,10 +110,23 @@ pull_tree_artix(){
 
 #{{{ patch
 
+set_maintainer() {
+    local name email path="$1"
+    name=$(git -C $path config --get user.name)
+    email=$(git -C $path config --get user.email)
+    firstline=$(head -n 1 "$path"/PKGBUILD)
+    sed "2i ${firstline}" -i "$path"/PKGBUILD
+    sed -e "1s|Maintainer:.*|Maintainer: $name <$email>|" \
+        -i "$path"/PKGBUILD
+    sed -e "2s|Maintainer|Contributor|" -i "$path"/PKGBUILD
+}
+
 patch_pkg(){
     local pkgpath="$1"
     local pkg=${pkgpath%/*}
     pkg=${pkg##*/}
+    sed -e 's|arch-meson|artix-meson|' -i "$pkgpath"/PKGBUILD
+    set_maintainer "$pkgpath"
     case $pkg in
         glibc)
             msg2 "Patching %s" "$pkg"
@@ -217,14 +208,14 @@ from_arch(){
     [[ -z $srcpath ]] && die "Package '%s' does not exist!" "${package}"
 
     repo=$(find_repo "$srcpath")
-    msg "repo: %s" "${repo#*/}"
+    msg "repo: %s" "$repo"
 
-    archpath=$srcpath/$repo
+    archpath=$srcpath/repos/$repo
     artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${package}")
 
     show_deps "$archpath"
 
-    if [[ -f "$artixpath"/.gitrepo ]]; then
+    if [[ -f "$artixpath"/Jenkinsfile ]]; then
         artixpath="$artixpath"/trunk
 
         if [[ -d "$artixpath" ]];then
@@ -243,7 +234,7 @@ view_build(){
     archpath=$(find_pkg "${TREE_DIR_ARCH}" "${package}")
     [[ -z $archpath ]] && die "Package '%s' does not exist!" "${package}"
     repo=$(find_repo "${archpath}")
-    archpath=$archpath/$repo
+    archpath=$archpath/repos/$repo
     msg "repo: %s" "${repo#*/}"
     show_deps "$archpath"
 }
@@ -261,8 +252,8 @@ check_tree(){
 }
 
 sync_repos(){
-    ${sync_arch} && pull_tree_arch
-    ${sync_artix} && pull_tree_artix
+    ${sync_arch} && update_tree "Arch"
+    ${sync_artix} && update_tree
 }
 
 load_makepkg_config
@@ -279,7 +270,6 @@ sync_artix=true
 import=false
 view=false
 createnew=false
-sync_group=false
 check=false
 
 package=''
@@ -287,29 +277,27 @@ package=''
 team='community'
 group="${ARTIX_TREE[0]}"
 
-host_tree_artix="${GIT_SSH}:artixlinux"
-
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo '    -p <pkg>      Package name'
-    echo '    -t <team>     Team name (only with -n)'
-    echo '                  Possible values: core,extra,community,multilib'
-    echo "                  [default: ${team}]"
-    echo '    -g <group>    Group name, the superrepo (only with -n or -s)'
-    echo "                  [default: ${group}]"
-    echo "    -s            Clone or pull repos"
-    echo "    -a            Don't clone or pull arch repos"
-    echo "    -b            Don't clone or pull artix repos"
-    echo '    -i            Import a package from arch repos'
-    echo '    -n            New remote subrepo and clone it'
-    echo '    -v            Check if a package is in the artix tree(s)'
-    echo '    -c            View package depends'
-    echo '    -x            Exclude testing (only with -i)'
-    echo '    -y            Exclude staging (only with -i)'
-    echo '    -z            Include kde & gnome unstable (only with -i)'
-    echo '    -h            This help'
-    echo ''
-    echo ''
+    printf "Usage: %s [options]\n" "${0##*/}"
+    printf '    -p <pkg>      Package name\n'
+    printf '    -t <team>     Team name (only with -n)\n'
+    printf '                  Possible values: core,extra,community,multilib\n'
+    printf "                  [default: %s]\n" "${team}"
+    printf '    -g <group>    Group name, the superrepo (only with -n)\n'
+    printf "                  [default: %s]\n" "${group}"
+    printf "    -s            Clone or pull repos\n"
+    printf "    -a            Don't clone or pull arch repos\n"
+    printf "    -b            Don't clone or pull artix repos\n"
+    printf '    -i            Import a package from arch repos\n'
+    printf '    -n            New remote pkgrepo and add it\n'
+    printf '    -v            Check if a package is in the artix tree(s)\n'
+    printf '    -c            View package depends\n'
+    printf '    -x            Exclude testing (only with -i)\n'
+    printf '    -y            Exclude staging (only with -i)\n'
+    printf '    -z            Include kde & gnome unstable (only with -i)\n'
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -319,7 +307,7 @@ while getopts "${opts}" arg; do
     case "${arg}" in
         p) package="$OPTARG" ;;
         t) team="$OPTARG" ;;
-        g) group="$OPTARG"; sync_group=true ;;
+        g) group="$OPTARG" ;;
         s) sync=true ;;
         a) sync_arch=false ;;
         b) sync_artix=false ;;
@@ -331,7 +319,6 @@ while getopts "${opts}" arg; do
         y) staging=false ;;
         z) unstable=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 
@@ -339,12 +326,22 @@ shift $(( OPTIND - 1 ))
 
 set_arch_repos "$testing" "$staging" "$unstable"
 
-${sync} && sync_repos
+if ${sync}; then
+    sync_repos
+fi
 
-${view} && view_build
+if ${view}; then
+    view_build
+fi
 
-${check} && check_tree
+if ${check}; then
+    check_tree
+fi
 
-${import} && from_arch
+if ${import}; then
+    from_arch
+fi
 
-${createnew} && subrepo_new
+if ${createnew}; then
+    pkgrepo_new
+fi

bin/pkg/checkpkg.in

@@ -13,77 +13,10 @@
 # GNU General Public License for more details.
 
 m4_include(lib/base/message.sh)
-
-shopt -s extglob
+m4_include(lib/pkg/diff.sh)
 
 load_makepkg_config
 
-#{{{ functions
-
-pkgver_equal() {
-    if [[ $1 = *-* && $2 = *-* ]]; then
-        # if both versions have a pkgrel, then they must be an exact match
-        [[ $1 = "$2" ]]
-    else
-        # otherwise, trim any pkgrel and compare the bare version.
-        [[ ${1%%-*} = "${2%%-*}" ]]
-    fi
-}
-
-find_cached_package() {
-    local searchdirs=("$PKGDEST" "$PWD") results=()
-    local targetname=$1 targetver=$2 targetarch=$3
-    local dir pkg pkgbasename name ver rel arch r results
-
-    for dir in "${searchdirs[@]}"; do
-        [[ -d $dir ]] || continue
-
-        for pkg in "$dir"/*.pkg.tar?(.!(sig|*.*)); do
-            [[ -f $pkg ]] || continue
-
-            # avoid adding duplicates of the same inode
-            for r in "${results[@]}"; do
-                [[ $r -ef $pkg ]] && continue 2
-            done
-
-            # split apart package filename into parts
-            pkgbasename=${pkg##*/}
-            pkgbasename=${pkgbasename%.pkg.tar*}
-
-            arch=${pkgbasename##*-}
-            pkgbasename=${pkgbasename%-"$arch"}
-
-            rel=${pkgbasename##*-}
-            pkgbasename=${pkgbasename%-"$rel"}
-
-            ver=${pkgbasename##*-}
-            name=${pkgbasename%-"$ver"}
-
-            if [[ $targetname = "$name" && $targetarch = "$arch" ]] &&
-                pkgver_equal "$targetver" "$ver-$rel"; then
-                results+=("$pkg")
-            fi
-        done
-    done
-
-    case ${#results[*]} in
-        0)
-            return 1
-        ;;
-        1)
-            printf '%s\n' "${results[0]}"
-            return 0
-        ;;
-        *)
-            error 'Multiple packages found:'
-            printf '\t%s\n' "${results[@]}" >&2
-            return 1
-        ;;
-    esac
-}
-
-#}}}
-
 usage() {
     cat <<- _EOF_
         Usage: ${BASH_SOURCE[0]##*/} [OPTIONS]
@@ -197,7 +130,7 @@ for _pkgname in "${pkgname[@]}"; do
     if ! diff_output="$(sdiff -s "$TEMPDIR/libraries-$_pkgname-old" "$TEMPDIR/libraries-$_pkgname")"; then
         message="Sonames differ in $_pkgname!"
         (( WARN )) && warning "$message" || msg "$message"
-        echo "$diff_output"
+        printf "%s\n" "$diff_output"
     else
         msg "No soname differences for %s." "$_pkgname"
     fi

bin/pkg/checkrepo.in

@@ -18,19 +18,42 @@ m4_include(lib/base/message.sh)
 m4_include(lib/pkg/repo.sh)
 m4_include(lib/pkg/table.sh)
 
+#{{{ db libs
+
+extract_db() {
+    local u="$1" cdir="$2"
+    rm -rf "$cdir"
+    mkdir -p "$cdir"
+    msg2 "%s" "${cdir##*/}"
+    curl -L -s "$u" | bsdtar -xf - -C "$cdir"
+}
+
+update_db_cache(){
+    msg "Updating database cache ..."
+    local cachedir url
+    for repo in "${searchrepos[@]}"; do
+        cachedir=${db_cache_dir}/linksdb/$repo
+        url=${REPOS_MIRROR}/$repo/os/${CARCH}/$repo.${linksdb_ext}
+        extract_db "$url" "$cachedir"
+    done
+    msg "Done"
+}
+
+#}}}
+
 #{{{ sogrep
 
 query_db() {
     for repo in "${searchrepos[@]}"; do
         local db
-        db=${db_cache_dir}/${linksdb_ext}/${CARCH}/${repo}/
+        db=${db_cache_dir}/linksdb/$repo/
         if [[ -d ${db} ]]; then
             while read -rd '' pkg; do
                 read -r match
                 pkg=${pkg#${db}}
                 pkg="${pkg%/*}"
-                msg_row "${tableQ}" "${repo}" "${pkg}" "${match}"
-            done < <(grep -rZ "${library}" "${db}") | sort -u
+                msg_row "${tableQ}" "$repo" "$pkg" "${match}"
+            done < <(grep -rZ "$library" "$db") | sort -u
         fi
     done
 }
@@ -41,7 +64,7 @@ query_db() {
 
 is_db_entry() {
     local pkgname="$1" repo="${REPOS[$2]}" entry
-    entry=${db_cache_dir}/${linksdb_ext}/${CARCH}/$repo/$pkgname
+    entry=${db_cache_dir}/linksdb/$repo/$pkgname
 
     if [[ -d "$entry" ]];then
         return 0
@@ -50,26 +73,74 @@ is_db_entry() {
 }
 
 check_db(){
-    local pkgpath="${1%/*}"
+    local pkgpath="${1}"
 
     for repo in "${!REPOS[@]}"; do
+
         local pkgbuild artixver
-        [[ -f $pkgpath/$CARCH/$repo/PKGBUILD ]] && pkgbuild=$pkgpath/$CARCH/$repo/PKGBUILD
-        [[ -f $pkgpath/repos/$repo-$CARCH/PKGBUILD ]] && pkgbuild=$pkgpath/repos/$repo-$CARCH/PKGBUILD
-        [[ -f $pkgpath/repos/$repo-any/PKGBUILD ]] && pkgbuild=$pkgpath/repos/$repo-any/PKGBUILD
+        if [[ -f $pkgpath/$repo/PKGBUILD ]]; then
+            pkgbuild=$pkgpath/$repo/PKGBUILD
 
-        # shellcheck disable=1090
-        . "$pkgbuild" 2>/dev/null
-        artixver=$(get_full_version)
+            # shellcheck disable=1090
+            . "$pkgbuild" 2>/dev/null
+            artixver=$(get_full_version)
+            for name in "${pkgname[@]}"; do
+                if ! is_db_entry "$name-$artixver" "$repo"; then
+                    msg_row_red "${tableU}" "$repo" "$name" "$artixver" "false"
+                else
+                    ${all_db} && msg_row "${tableU}" "$repo" "$name" "$artixver" "true"
+                fi
+            done
+            unset artixver pkgbuild pkgver epoch pkgname pkgbase
+        fi
+    done
+}
 
-        for name in "${pkgname[@]}"; do
-            if ! is_db_entry "$name-$artixver" "$repo"; then
-                msg_row_upgrade "${tableU}" "$repo" "$name" "$artixver" "false"
-            else
-                ${all_db} && msg_row "${tableU}" "$repo" "$name" "$artixver" "true"
+#}}}
+
+# {{{ check obsolete
+
+show_obsolete_table() {
+    local arch_mirror='https://mirror.f4st.host/archlinux'
+
+    local arch_repo artix_repo artix_db arch_db url
+    arch_repo="${searchrepos[@]}"
+    artix_repo="${REPOS[$arch_repo]}"
+
+    artix_db="${db_cache_dir}/artixdb/${artix_repo}"
+    arch_db="${db_cache_dir}/archdb/${arch_repo}"
+
+    msg "Updating database cache ..."
+    url=${REPOS_MIRROR}/${artix_repo}/os/$CARCH/${artix_repo}.${db_ext}
+    extract_db "$url" "${artix_db}"
+
+    url=${arch_mirror}/${arch_repo}/os/$CARCH/${arch_repo}.${db_ext}
+    extract_db "$url" "${arch_db}"
+    msg "Done"
+
+    msg_table_header "${tableQ}" "Repo" "Package" "Obsolete"
+    for p in "${artix_db}"/*; do
+        local pkg rel
+        pkg=${p##*/}
+        rel=${pkg##*-}
+        rel=${rel%.*}
+        pkg=${pkg%-*}
+        local p="$pkg-$rel"
+
+        if [[ "$p" != *openrc* ]] && [[ "$p" != *runit* ]] \
+        && [[ "$p" != *s6* ]] && [[ "$p" != *suite66* ]] \
+        && [[ "$p" != *udev* ]] && [[ "$p" != *elogind* ]] \
+        && [[ "$p" != *sysusers* ]] && [[ "$p" != *tmpfiles* ]] \
+        && [[ "$p" != *execline* ]] && [[ "$p" != *skalibs* ]] \
+        && [[ "$p" != *netifrc* ]] && [[ "$p" != *bootlogd* ]] \
+        && [[ "$p" != *pam_rundir* ]] && [[ "$p" != *artools* ]] \
+        && [[ "$p" != *archlinux* ]] && [[ "$p" != *iso-profiles* ]] \
+        && [[ "$p" != *calamares* ]] && [[ "$p" != *iso-initcpio* ]] \
+        && [[ "$p" != *dinit* ]] && [[ "$p" != *artix* ]] && [[ "$p" != *blocaled* ]]; then
+            if [[ ! -d "${arch_db}/$p" ]]; then
+                msg_row "${tableQ}" "${artix_repo}" "$p" "true"
             fi
-        done
-        unset artixver pkgbuild pkgver epoch pkgname pkgbase
+        fi
     done
 }
 
@@ -85,23 +156,10 @@ show_db_table(){
     tree_loop check_db
 }
 
-update_db_cache(){
-    msg "Updating database cache ..."
-    local cachedir url
-    for repo in "${searchrepos[@]}"; do
-        cachedir=${db_cache_dir}/${linksdb_ext}/${CARCH}/${repo}
-        rm -rf "$cachedir"
-        mkdir -p "$cachedir"
-        msg2 "%s" "$repo"
-        url=${REPOS_MIRROR}/${repo}/os/${CARCH}/${repo}.${linksdb_ext}
-        curl -L -s "$url" | bsdtar -xf - -C "$cachedir"
-    done
-    msg "Done"
-}
-
 db_cache_dir="${XDG_CACHE_HOME:-$USER_HOME/.cache}/artools"
 
 linksdb_ext="links.tar.${DBEXT}"
+db_ext="db.tar.${DBEXT}"
 
 load_makepkg_config
 
@@ -109,9 +167,10 @@ sync=false
 check=false
 query=false
 all_db=false
+obsolete=false
 
 readonly tableU="%-20s %-35s %-30s %-10s"
-readonly tableQ="%-20s %-45s %s"
+readonly tableQ="%-20s %-55s %s"
 
 load_valid_names
 
@@ -150,20 +209,21 @@ searchrepos=(
 #}}}
 
 usage() {
-    echo "Usage: ${0##*/} [options] (with -q [libname])"
-    echo '    -r <repo>     Repo name to query'
-    echo '                  [default: all]'
-    echo "    -s            Sync repo databases"
-    echo '    -c            Check repos'
-    echo '    -a            Show repo db (-c)'
-    echo "    -q            Query repo databases for so libs"
-    echo '    -h            This help'
-    echo ''
-    echo ''
+    printf "Usage: %s [options] (with -q [libname])\n" "${0##*/}"
+    printf '    -r <repo>     Repo name to query\n'
+    printf '                  [default: all]\n'
+    printf "    -s            Sync repo databases\n"
+    printf '    -c            Check repos\n'
+    printf '    -a            Show repo db (-c)\n'
+    printf '    -o            Check for obsolete packages\n'
+    printf "    -q            Query repo databases for so libs\n"
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
-opts='r:qcsah'
+opts='r:qcsaoh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
@@ -172,8 +232,8 @@ while getopts "${opts}" arg; do
         c) check=true ;;
         a) all_db=true ;;
         q) query=true ;;
+        o) obsolete=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 
@@ -186,3 +246,5 @@ ${sync} && update_db_cache
 ${check} && show_db_table
 
 ${query} && show_lib_table
+
+${obsolete} && show_obsolete_table

bin/pkg/commitpkg.in

@@ -15,183 +15,125 @@
 m4_include(lib/util-base.sh)
 m4_include(lib/util-pkg.sh)
 m4_include(lib/base/message.sh)
+m4_include(lib/pkg/common.sh)
 m4_include(lib/pkg/git.sh)
+m4_include(lib/pkg/gitea.sh)
 m4_include(lib/pkg/repo.sh)
 
 #{{{ functions
 
-push_tree(){
-    local tree="$1"
-    msg "Update (%s)" "${tree}"
-    git push origin master
-}
-
-subrepo_push(){
-    local pkg="$1"
-    msg2 "Subrepo push (%s)" "$pkg"
-    git subrepo push "$pkg" || die "%s push failed" "$pkg"
-}
-
-subrepo_clean(){
-    local pkg="$1"
-    msg2 "Subrepo clean (%s)" "$pkg"
-    git subrepo clean "$pkg"
-}
-
-subrepo_pull(){
-    local pkg="$1"
-    msg2 "Subrepo pull (%s)" "$pkg"
-    git subrepo pull "$pkg"
-}
-
-prepare_commit(){
-    # create new layout, copy & remove repos
-    if [[ -d repos ]]; then
-        msg "Switching to new layout ..."
-        [[ ! -d "$CARCH" ]] && mkdir "$CARCH"
-
-        for r in repos/*; do
-            local name noarch
-            name=${r#*/}
-            noarch=${name%-*}
-            mkdir "$CARCH/${noarch}"
-            cp repos/"${name}"/* "$CARCH/${noarch}/"
-            git add "$CARCH/${noarch}"
-        done
-
-        git rm -r repos
-        git commit -m "switch to new repo layout"
-        msg "Done switch"
-    fi
-
-    if [[ $action == 'add' ]] || [[ $action == 'move' ]] ;then
-        [[ -d "$CARCH/${repo_dest}" ]] && git rm -r "$CARCH/${repo_dest}"
-        [[ ! -d "$CARCH" ]] && mkdir "$CARCH"
-        [[ ! -d "$CARCH/${repo_dest}" ]] && mkdir "$CARCH/${repo_dest}"
-    fi
-}
-
-check_rebuild(){
-    if [[ -d "$CARCH"/"${valid_names[10]}" ]] \
-    && [[ "${repo_dest}" == "${valid_names[7]}" ]]; then
-        git rm -r "$CARCH"/"${valid_names[10]}"
-        git commit -m "switch from ${valid_names[10]} to ${valid_names[7]}"
-    elif [[ -d "$CARCH"/"${valid_names[7]}" ]] \
-    && [[ "${repo_dest}" == "${valid_names[10]}" ]]; then
-        git rm -r "$CARCH"/"${valid_names[7]}"
-        git commit -m "switch from ${valid_names[7]} to ${valid_names[10]}"
-    fi
-}
-
 check_team(){
-    if [[ "${repo_src}" == "${valid_names[0]}" \
-    && "${repo_dest}" == "${valid_names[1]}" ]] || \
-        [[ "${repo_src}" == "${valid_names[1]}" \
-        && "${repo_dest}" == "${valid_names[0]}" ]] || \
-        [[ "${repo_src}" == "${valid_names[1]}" \
-        && "${repo_dest}" == "${valid_names[2]}" ]] || \
-        [[ "${repo_src}" == "${valid_names[2]}" \
-        && "${repo_dest}" == "${valid_names[1]}" ]] ;then
+    if [[ "${repo_src}" == "${valid_names[0]}" && "${repo_dest}" == "${valid_names[1]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[1]}" && "${repo_dest}" == "${valid_names[0]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[1]}" && "${repo_dest}" == "${valid_names[2]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[2]}" && "${repo_dest}" == "${valid_names[1]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[0]}" && "${repo_dest}" == "${valid_names[2]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[2]}" && "${repo_dest}" == "${valid_names[0]}" ]]; then
 
-        local org
+        local org gitname
         org=$(get_pkg_org "${package}")
-        add_repo_to_team "${package}" "$org" "${repo_dest}"
-        remove_repo_from_team "${package}" "$org" "${repo_src}"
+        gitname=$(get_compliant_name "${package}")
+        add_team_to_repo "$gitname" "${org}" "${repo_dest}"
+        remove_team_from_repo "$gitname" "${org}" "${repo_src}"
     fi
 }
 
-path_config() {
-    [[ "${repo_src}" != 'trunk' ]] && pkgbuild="$CARCH/${repo_src}"/PKGBUILD
-
-    if [[ ! -f "$pkgbuild" ]]; then
-        pkgbuild=repos/"${repo_src}-${CARCH}"/PKGBUILD
-        [[ -f repos/"${repo_src}"-any/PKGBUILD ]] && pkgbuild=repos/"${repo_src}"-any/PKGBUILD
+push_super() {
+    local name="$1"
+    msg "Update (%s)" "$name"
+    git push origin master
+    git prune
+    if [[ "${cmd}" != 'commitpkg' ]]; then
+        check_team
     fi
+}
 
-    # shellcheck disable=1090
-    . "$pkgbuild"
+push_pkg() {
+    local name="$1"
+    if braid push "${package}"; then
+        braid update "${package}"
+        push_super "$name"
+    else
+        error "'braid push %s' failed.\n" "${package}"
+    fi
+}
+
+get_repo_commit_msg() {
+    printf "[%s] -> [%s] '%s' %s\n" "${repo_src}" "${repo_dest}" "${package}-$(get_full_version)" "${action}"
+}
+
+get_commit_msg() {
+    printf "[%s] '%s' %s\n" "${repo_src}" "${package}-$(get_full_version)" "${action}"
 }
 
 commit_pkg() {
     local commit_msg pkg
-    if ${remove};then
+    if ${remove}; then
         action='remove'
-        if [[ "${repo_src}" == 'trunk' ]];then
-            pkg=${package}
-            git rm -r trunk
-        else
-            pkg="${package}-$(get_full_version)"
-
-            prepare_commit
-
-            git rm -r "$CARCH/${repo_src}"
-        fi
-        commit_msg="[${repo_src}] '$pkg' ${action}"
+        commit_msg=$(get_commit_msg)
         msg "Action: %s" "$commit_msg"
+        if [[ "${repo_src}" == 'trunk' ]];then
+            git rm -r $package/trunk
+        else
+            git rm -r "$package/$CARCH/${repo_src}"
+        fi
     else
         action='modify'
-        commit_msg="[${repo_src}] '${package}-$(get_full_version)' ${action}"
+        commit_msg=$(get_commit_msg)
         msg "Action: %s" "$commit_msg"
-        git add .
+        git add "$package"
     fi
     git commit -m "$commit_msg"
 }
 
 repo_commit_pkg() {
     local commit_msg
-    if [[ "${repo_src}" == 'trunk' ]];then
+
+    [[ -d "$package/$CARCH/${repo_dest}" ]] && git rm -r "$package/$CARCH/${repo_dest}"
+    [[ ! -d "$package/$CARCH" ]] && mkdir "$package/$CARCH"
+    [[ ! -d "$package/$CARCH/${repo_dest}" ]] && mkdir "$package/$CARCH/${repo_dest}"
+
+    if [[ "${repo_src}" == 'trunk' ]]; then
         action='add'
-
-        prepare_commit
-        check_rebuild
-
-        cp trunk/* "$CARCH/${repo_dest}"/
+        commit_msg=$(get_repo_commit_msg)
+        msg "Action: %s" "$commit_msg"
+        cp -r "$package"/trunk/* "$package/$CARCH/${repo_dest}"/
     else
         action='move'
         [[ ! -f $pkgbuild ]] && die "%s does not exist!" "$pkgbuild"
-
-        prepare_commit
-
-        cp "$CARCH/${repo_src}"/* "$CARCH/${repo_dest}"/
-        git rm -r "$CARCH/${repo_src}"
+        commit_msg=$(get_repo_commit_msg)
+        msg "Action: %s" "$commit_msg"
+        cp -r "$package/$CARCH/${repo_src}"/* "$package/$CARCH/${repo_dest}"/
+        git rm -r "$package/$CARCH/${repo_src}"
     fi
-    commit_msg="[${repo_src}] -> [${repo_dest}] '${package}-$(get_full_version)' ${action}"
-    msg "Action: %s" "$commit_msg"
-
-    git add .
+    git add "$package"
     git commit -m "$commit_msg"
 }
 
 run(){
-    local artixpath head group
+    local artixpath head tree tree_name
     artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${package}")
     if [[ -n ${artixpath} ]];then
-        group=${artixpath%/*}
-        cd "${group}" || return
+        tree=${artixpath%/*}
+        tree_name=${tree##*/}
+        cd "$tree" || return
         head=$(get_local_head)
 
-        cd "${artixpath}" || return
-
-        path_config
-
-        if [[ "${cmd}" == 'commitpkg' ]];then
-            commit_pkg
-        else
-            repo_commit_pkg
+        pkgbuild="$package"/trunk/PKGBUILD
+        if [[ "${repo_src}" != 'trunk' ]]; then
+            pkgbuild="$package/$CARCH/${repo_src}"/PKGBUILD
         fi
+        # shellcheck disable=1090
+        . "$pkgbuild"
 
-        cd "${group}" || return
+        case "${cmd}" in
+            'commitpkg') commit_pkg ;;
+            *) repo_commit_pkg ;;
+        esac
 
-        ${push} && pull_tree "${group##*/}" "$head"
-#         subrepo_pull "${package}"
-        subrepo_push "${package}"
-        subrepo_clean "${package}"
-
-        ${push} && push_tree "${group##*/}"
-
-        git prune
-
-        [[ "${cmd}" != 'commitpkg' ]] && check_team
+        msg "Checking (%s) (Artix)" "$tree_name"
+        pull_tree "$tree_name" "$head"
+        push_pkg "$tree_name"
     else
         die "Package '%s' does not exist!" "${package}"
     fi
@@ -217,35 +159,29 @@ load_valid_names
 repo_src='trunk'
 package=''
 remove=false
-push=false
-
-pkgbuild=trunk/PKGBUILD
 
 cmd=${0##*/}
 repo_dest=${cmd%pkg}
 
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo "    -s <name>          Source repository [default:${repo_src}]"
-    echo '    -p <pkg>           Package name'
-    echo '    -r                 Delete from repo (commitpkg only)'
-    echo '    -u                 Push'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
+    printf "Usage: %s [options]\n" "${0##*/}"
+    printf "    -s <name>          Source repository [default: %s]\n" "${repo_src}"
+    printf '    -p <pkg>           Package name\n'
+    printf '    -r                 Delete from repo (commitpkg only)\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
-opts='p:s:urh'
+opts='p:s:rh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
         s) repo_src="$OPTARG" ;;
         p) package="$OPTARG" ;;
         r) remove=true ;;
-        u) push=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/comparepkg.in

@@ -31,30 +31,48 @@ write_list(){
     printf "%s\n" "$line" >> "${TREE_DIR_ARTIX}"/"$name".list
 }
 
+get_group() {
+    local group
+    group="${artixpath%/*}"
+    group=${group##*/}
+    printf "%s\n" "${group#*-}"
+}
+
 compare_m(){
-    case ${artixrepo} in
-        *testing*|*staging*|*rebuild)
-            if [[ "${a}" == "${b}" ]] || [[ "${a}" == 'staging' && "${b}" == 'rebuild' ]]; then
-                msg_row "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
-            else
-                msg_row_notify "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
-                [[ -n "$archrepo" ]] && write_list "${a}:${b}:$pkg" pkg_moves
-            fi
-        ;;
-    esac
+#     if [ "$result" -eq 0 ];then
+        case "$artixrepo" in
+            *testing*|*staging*|*rebuild)
+                if [[ "${archrepo}" == "${artixrepo}" ]]; then
+                    msg_row "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
+                elif [[ "${archrepo}" == 'staging' && "${artixrepo}" == 'rebuild' ]]; then
+                    msg_row_yellow "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
+                else
+                    msg_row_green "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
+                    if [[ -n "${archrepo}" ]]; then
+                        write_list "${archrepo}:${artixrepo}:$pkg" pkg_moves
+                    else
+                        write_list "@repo@:${artixrepo}:$pkg" artix
+                    fi
+                fi
+            ;;
+        esac
+#     fi
 }
 
 compare_u(){
     if [ "$result" -eq -1 ];then
-        msg_row_upgrade "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
-        write_list "${a}:$pkg" pkg_upgrades
+#         local arel=${archver##*-} brel=${artixver##*-}
+#         local reldiff
+#         reldiff=$(( $arel-${brel%.*} ))
+        msg_row_red "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
+        write_list "${archrepo}:$pkg" pkg_upgrades
     fi
 }
 
 compare_d(){
     if [ "$result" -eq 1 ];then
-        if [[ -n "$archver" ]] && [[ -n "$archrepo" ]];then
-            msg_row_downgrade "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
+        if [[ -n "$archver" ]] && [[ -n "${archrepo}" ]];then
+            msg_row_yellow "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
         fi
     fi
 }
@@ -65,31 +83,26 @@ get_archpath(){
     for tree in "${ARCH_TREE[@]}"; do
         [[ -d ${TREE_DIR_ARCH}/$tree/$pkg/repos ]] && archpath=${TREE_DIR_ARCH}/$tree/$pkg
     done
-    echo "$archpath"
+    printf "%s\n" "$archpath"
 }
 
 pre_compare(){
-    local func="$1" pkgpath="$2" result group pkg
-    group="${pkgpath%/*}"
-    group=${group##*/}
-    pkg=${pkgpath##*/}
+    local artixpath="$1" func="$2" pkg
+    pkg=${artixpath##*/}
 
-    local artixrepo archrepo pkgbuild artixver archver archpath node a b
-    artixrepo=$(find_repo "$pkgpath")
-    pkgbuild=$pkgpath/$artixrepo/PKGBUILD
+    local artixrepo archrepo pkgbuild artixver archver archpath epoch
 
-    if [[ -f $pkgbuild ]]; then
+    artixrepo=$(find_repo "$artixpath")
+    pkgbuild=$artixpath/$CARCH/$artixrepo/PKGBUILD
+
+    if [[ -f "$pkgbuild" ]]; then
         # shellcheck disable=1090
         . "$pkgbuild" 2>/dev/null
         artixver=$(get_full_version)
         archpath=$(get_archpath "$pkg")
-        archrepo=$(find_repo "${archpath}")
-        pkgbuild=$archpath/$archrepo/PKGBUILD
-        node=${artixrepo%/*}
-        a=${archrepo#*/} b=${artixrepo#*/}
-        a="${a%-*}"
-
-        [[ "$node" != "$CARCH" ]] && b=${b%-*}
+        archrepo=$(find_repo "$archpath")
+        pkgbuild=$archpath/repos/$archrepo/PKGBUILD
+        archrepo="${archrepo%-*}"
 
         if [[ -f "$pkgbuild" ]]; then
             # shellcheck disable=1090
@@ -97,27 +110,26 @@ pre_compare(){
             archver=$(get_full_version)
         fi
 
+        local result
         result=$(vercmp "$artixver" "$archver")
 
         "$func"
-
-        unset epoch
     fi
 }
 
 compare_upgrades(){
-    local pkgpath="${1%/*}"
-    pre_compare compare_u "$pkgpath"
+    local artixpath="${1%/*}"
+    pre_compare "$artixpath" compare_u
 }
 
 compare_downgrades(){
-    local pkgpath="${1%/*}"
-    pre_compare compare_d "$pkgpath"
+    local artixpath="${1%/*}"
+    pre_compare "$artixpath" compare_d
 }
 
 compare_move(){
-    local pkgpath="${1%/*}"
-    pre_compare compare_m "$pkgpath"
+    local artixpath="${1%/*}"
+    pre_compare "$artixpath" compare_m
 }
 
 #}}}
@@ -140,6 +152,7 @@ show_downgrades_table(){
 show_move_table(){
     show_compare_header
     remove_list pkg_moves
+    remove_list artix
     tree_loop compare_move
 }
 
@@ -155,19 +168,19 @@ upgrades=false
 downgrades=false
 move=false
 
-readonly table="%-18s %-18s %-25s %-27s %-27s %-10s"
+readonly table="%-18s %-18s %-29s %-27s %-27s %-7s"
 
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo '    -u            Show upgrade packages'
-    echo '    -d            Show downgrade packages'
-    echo '    -m            Show packages to move'
-    echo "    -x            Don't inlcude testing packages"
-    echo "    -y            Don't inlcude staging packages"
-    echo '    -z            Include unstable kde and gnome'
-    echo '    -h            This help'
-    echo ''
-    echo ''
+    printf 'Usage: %s [options]\n' "${0##*/}"
+    printf '    -u            Show upgrade packages\n'
+    printf '    -d            Show downgrade packages\n'
+    printf '    -m            Show packages to move\n'
+    printf '    -x            Do not inlcude testing packages\n'
+    printf '    -y            Do not inlcude staging packages\n'
+    printf '    -z            Include unstable kde and gnome\n'
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -182,7 +195,6 @@ while getopts "${opts}" arg; do
         y) staging=false ;;
         z) unstable=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/deploypkg.in

@@ -23,6 +23,8 @@ add(){
     if pkgfile=$(find_cached_pkgfile "${pkgname}"); then
         msg "Found: %s" "${pkgfile}"
         packages+=("${pkgname}")
+        dbargs+=("${packages[@]}")
+        linksargs+=("${packages[@]}")
         action='add'
         ln -sfv "${pkgfile}"{,.sig} "$repo_path"/
     fi
@@ -36,13 +38,17 @@ remove(){
 
 repo_action(){
     local packages=() action func="$1"
+    local dbargs=( -R "${dest_repo}.${pkgdb_ext}")
+    local linksargs=("${dest_repo}.${linksdb_ext}" )
     for pkgname in "${passfiles[@]}"; do
         "$func"
     done
     cd "$repo_path" || return
     if [[ -n "${action}" ]]; then
-        repo-"${action}" -R "${dest_repo}"."${pkgdb_ext}" "${packages[@]}"
-        ${linksdb} && links-"${action}" "${dest_repo}"."${linksdb_ext}" "${packages[@]}"
+        repo-"${action}" "${dbargs[@]}"
+        if ${linksdb}; then
+            links-"${action}" "${linksargs[@]}"
+        fi
     fi
 }
 
@@ -61,14 +67,14 @@ cmd=${0##*/}
 dest_repo=${cmd#*-}
 
 usage() {
-    echo "Usage: ${cmd} [options]"
-    echo '    -d <dest>          Destination repository'
-    echo '    -a                 Add package(s) to repository'
-    echo '    -r                 Remove package(s) from repository'
-    echo '    -l                 Use links db'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
+    printf "Usage: %s [options]\n" "${cmd}"
+    printf '    -d <dest>          Destination repository\n'
+    printf '    -a                 Add package(s) to repository\n'
+    printf '    -r                 Remove package(s) from repository\n'
+    printf '    -l                 Use links db\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -81,7 +87,6 @@ while getopts "${opts}" arg; do
         r) rm_pkg=true; add_pkg=false ;;
         l) linksdb=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 
@@ -92,6 +97,10 @@ passfiles=("$@")
 repo_path=${REPOS_ROOT}/${dest_repo}/os/${CARCH}
 
 if [[ -n "${passfiles[*]}" ]]; then
-    ${add_pkg} && repo_action add
-    ${rm_pkg} && repo_action remove
+    if ${add_pkg}; then
+        repo_action add
+    fi
+    if ${rm_pkg}; then
+        repo_action remove
+    fi
 fi

bin/pkg/diffpkg.in

@@ -0,0 +1,329 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/diff.sh)
+
+usage() {
+    cat <<- _EOF_
+    Usage: ${BASH_SOURCE[0]##*/} [OPTIONS] [MODES] [FILE|PKGNAME...]
+
+    Searches for a locally built package corresponding to the PKGBUILD, and
+    downloads the last version of that package from the Pacman repositories.
+    It then compares the package archives using different modes while using
+    simple tar content list by default.
+
+    When given one package, use it to diff against the locally built one.
+    When given two packages, diff both packages against each other.
+
+    In either case, a package name will be converted to a filename from the
+    cache, and diffpkg will proceed as though this filename was initially
+    specified.
+
+    OPTIONS
+        -M, --makepkg-config Set an alternate makepkg configuration file
+        -v, --verbose        Provide more detailed/unfiltered output
+        -h, --help           Show this help text
+
+    MODES
+        -l, --list           Activate content list diff mode (default)
+        -d, --diffoscope     Activate diffoscope diff mode
+        -p, --pkginfo        Activate .PKGINFO diff mode
+        -b, --buildinfo      Activate .BUILDINFO diff mode
+_EOF_
+}
+
+MAKEPKG_CONF=/etc/makepkg.conf
+POOLDIR=/srv/pkgpool
+
+VERBOSE=0
+TARLIST=0
+DIFFOSCOPE=0
+PKGINFO=0
+BUILDINFO=0
+
+DIFFMODE=--side-by-side
+DIFFCOLOR=--color=auto
+DIFFWIDTH=--width=auto
+DIFFOPTIONS=(--expand-tabs)
+
+# option checking
+while (( $# )); do
+    case $1 in
+        -h|--help)
+            usage
+            exit 0
+        ;;
+        -M|--makepkg-config)
+            (( $# <= 1 )) && die "missing argument for %s" "$1"
+            MAKEPKG_CONF="$2"
+            shift 2
+        ;;
+        -l|--list)
+            TARLIST=1
+            shift
+        ;;
+        -d|--diffoscope)
+            DIFFOSCOPE=1
+            shift
+        ;;
+        -p|--pkginfo)
+            PKGINFO=1
+            shift
+        ;;
+        -b|--buildinfo)
+            BUILDINFO=1
+            shift
+        ;;
+        -v|--verbose)
+            VERBOSE=1
+            shift
+        ;;
+        -u|-U|--unified)
+            DIFFMODE=--unified
+            shift
+        ;;
+        -y|--side-by-side)
+            DIFFMODE=--side-by-side
+            shift
+        ;;
+        --color|--color=*)
+            if [[ $2 == never || $2 == always || $2 == auto ]]; then
+                DIFFCOLOR="--color=$2"
+                shift 2
+                continue
+            fi
+            if [[ $1 == --color ]]; then
+                DIFFCOLOR="--color=auto"
+            else
+                DIFFCOLOR="$1"
+            fi
+            shift
+        ;;
+        -W|--width)
+            (( $# <= 1 )) && die "missing argument for %s" "$1"
+            DIFFWIDTH="--width=$2"
+            shift 2
+        ;;
+        --width=*)
+            DIFFWIDTH="$1"
+            shift
+        ;;
+        -P|--pool)
+            (( $# <= 1 )) && die "missing argument for %s" "$1"
+            POOLDIR="$2"
+            shift 2
+        ;;
+        --pool=*)
+            POOLDIR="${1#*=}"
+            shift
+        ;;
+        --)
+            shift
+            break
+        ;;
+        -*|--*)
+            die "invalid argument: %s" "$1"
+        ;;
+        *)
+            break
+        ;;
+    esac
+done
+
+# Set options based on flags or magic values
+if (( VERBOSE )); then
+    if [[ $DIFFMODE == --unified ]]; then
+        DIFFMODE="--unified=99999"
+    fi
+else
+    DIFFOPTIONS+=(--suppress-common-lines)
+fi
+if [[ $DIFFWIDTH == --width=columns ]]; then
+    DIFFWIDTH="--width=${COLUMNS:-130}"
+fi
+if [[ $DIFFWIDTH != --width=auto ]]; then
+    DIFFOPTIONS+=("${DIFFWIDTH}")
+fi
+DIFFOPTIONS+=("${DIFFMODE}" "${DIFFCOLOR}")
+
+if ! (( DIFFOSCOPE || TARLIST || PKGINFO || BUILDINFO )); then
+    TARLIST=1
+fi
+
+# Source makepkg.conf; fail if it is not found
+if [[ -r "${MAKEPKG_CONF}" ]]; then
+    # shellcheck source=config/makepkg/x86_64.conf
+    source "${MAKEPKG_CONF}"
+else
+    die "${MAKEPKG_CONF} not found!"
+fi
+
+# Source user-specific makepkg.conf overrides
+if [[ -r "${XDG_CONFIG_HOME:-$HOME/.config}/pacman/makepkg.conf" ]]; then
+    # shellcheck source=/dev/null
+    source "${XDG_CONFIG_HOME:-$HOME/.config}/pacman/makepkg.conf"
+elif [[ -r "$HOME/.makepkg.conf" ]]; then
+    # shellcheck source=/dev/null
+    source "$HOME/.makepkg.conf"
+fi
+
+STARTDIR=$(pwd)
+trap 'rm -rf $TMPDIR' EXIT INT TERM QUIT
+TMPDIR=$(mktemp -d --tmpdir diffpkg-script.XXXXXXXX)
+export TMPDIR
+
+tar_list() {
+    bsdtar tf "$*" | if (( VERBOSE )); then
+        cat
+    else
+        sed -E 's|^usr/lib/modules/[0-9][^/]+|usr/lib/modules/[…]|g'
+    fi | sort
+}
+
+file_line_length() {
+    path="$1"
+    wc -L "${path}" | tail -n1 | sed -E 's/^ +//g' | cut -d' ' -f1
+}
+
+file_diff_columns() {
+    file1="$1"
+    file2="$2"
+    file1_length=$(file_line_length "$file1")
+    file2_length=$(file_line_length "$file2")
+    echo $(( file1_length + file2_length + 3 ))
+}
+
+diff_pkgs() {
+    local oldpkg newpkg
+    oldpkg=$(readlink -m "$1")
+    newpkg=$(readlink -m "$2")
+
+    [[ -f $oldpkg ]] || die "No such file: %s" "${oldpkg}"
+    [[ -f $newpkg ]] || die "No such file: %s" "${newpkg}"
+
+    DIFFOPTIONS+=(--label "${oldpkg}" --label "${newpkg}")
+
+    if (( TARLIST )); then
+        tar_list "$oldpkg" > "$TMPDIR/old"
+        tar_list "$newpkg" > "$TMPDIR/new"
+    fi
+
+    if (( PKGINFO )); then
+        bsdtar xOqf "$oldpkg" .PKGINFO > "$TMPDIR/old"
+        bsdtar xOqf "$newpkg" .PKGINFO > "$TMPDIR/new"
+    fi
+
+    if (( BUILDINFO )); then
+        bsdtar xOqf "$oldpkg" .BUILDINFO > "$TMPDIR/old"
+        bsdtar xOqf "$newpkg" .BUILDINFO > "$TMPDIR/new"
+    fi
+
+    if (( TARLIST || PKGINFO || BUILDINFO )); then
+    # Resolve dynamic auto width one we know the content to diff
+        if [[ $DIFFWIDTH == --width=auto ]]; then
+            AUTOLENGTH=$(file_diff_columns "$TMPDIR/old" "$TMPDIR/new")
+            DIFFOPTIONS+=("--width=${AUTOLENGTH}")
+        fi
+
+        # Print a header for side-by-side view as it lacks labels
+        if [[ $DIFFMODE == --side-by-side ]]; then
+            printf -- "--- %s\n+++ %s\n" "${oldpkg}" "${newpkg}"
+        fi
+
+        diff "${DIFFOPTIONS[@]}" "$TMPDIR/old" "$TMPDIR/new"
+    fi
+
+    if (( DIFFOSCOPE )); then
+        diffoscope "${DIFFCOLOR/--color/--text-color}" "$oldpkg" "$newpkg"
+    fi
+}
+
+shopt -s extglob
+
+fetch_pkg() {
+    local pkg pkgdest pkgurl
+    case $1 in
+        *://*)
+            pkgurl=$1 ;;
+        /*|*/*)
+            pkgurl=$(readlink -m "$1") ;;
+        *.pkg.tar*)
+            pkgurl=$1 ;;
+        '')
+        ;;
+        *)
+            pkg=$1 ;;
+    esac
+
+    if [[ -z ${pkgurl} ]]; then
+        # Try to find latest package in pool dir
+        if [[ -d ${POOLDIR} ]]; then
+            shopt -s extglob nullglob
+            pkgurl=$(printf "%s\n" "${POOLDIR}"/*/"${_pkgname}"-!(*-*)-!(*-*)-!(*-*).pkg.tar!(*.sig)|sort -Vr|head -1)
+            shopt -u extglob nullglob
+        fi
+        # Search via pacman database if no pool file exists
+        if [[ ! -f ${pkgurl} ]]; then
+            pkgurl=$(pacman -Spdd --print-format '%l' --noconfirm "$pkg") ||
+            die "Couldn't download previous package for %s." "$pkg"
+        fi
+    fi
+
+    pkg=${pkgurl##*/}
+    pkgdest=$(mktemp -t -d "${pkg}-XXXXXX")/${pkg}
+
+    if [[ $pkgurl = file://* || ( $pkgurl = /* && -f $pkgurl ) ]]; then
+        ln -sf "${pkgurl#file://}" "$pkgdest"
+    elif [[ -f "$PKGDEST/$pkg" ]]; then
+        ln -sf "$PKGDEST/$pkg" "$pkgdest"
+    elif [[ -f "$STARTDIR/$pkg" ]]; then
+        ln -sf "$STARTDIR/$pkg" "$pkgdest"
+    elif [[ $pkgurl = *://* ]]; then
+        curl -fsLC - --retry 3 --retry-delay 3 -o "$pkgdest" "$pkgurl" || \
+        die "Couldn't download %s" "$pkgurl"
+    else
+        die "File not found: %s" "$pkgurl"
+    fi
+
+    echo "$pkgdest"
+}
+
+shopt -u extglob
+
+if (( $# < 2 )); then
+    if [[ ! -f PKGBUILD ]]; then
+        die "This must be run in the directory of a built package.\nTry '$(basename "$0") --help' for more information."
+    fi
+
+    # shellcheck source=contrib/makepkg/PKGBUILD.proto
+    . ./PKGBUILD
+    if [[ ${arch[0]} == 'any' ]]; then
+        CARCH='any'
+    fi
+
+    for _pkgname in "${pkgname[@]}"; do
+        comparepkg=$_pkgname
+        pkgurl=
+        target_pkgver=$(get_full_version "$_pkgname")
+        if ! pkgfile=$(find_cached_package "$_pkgname" "$target_pkgver" "$CARCH"); then
+            die 'tarball not found for package: %s' "${_pkgname}-$target_pkgver"
+        fi
+
+        ln -s "$pkgfile" "$TMPDIR"
+
+        if (( $# )); then
+            comparepkg="$1"
+        fi
+
+        oldpkg=$(fetch_pkg "$comparepkg") || exit 1
+
+        diff_pkgs "$oldpkg" "$pkgfile"
+    done
+else
+    file1=$(fetch_pkg "$1") || exit 1
+    file2=$(fetch_pkg "$2") || exit 1
+
+    diff_pkgs "$file1" "$file2"
+fi

bin/pkg/export-pkgbuild-keys.in

@@ -0,0 +1,70 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+m4_include(lib/base/message.sh)
+
+usage() {
+    cat <<- _EOF_
+        Usage: ${BASH_SOURCE[0]##*/}
+
+        Export the PGP keys from a PKGBUILDs validpgpkeys array into the keys/pgp/
+        subdirectory. Useful for distributing packager validated source signing
+        keys alongside PKGBUILDs.
+
+        OPTIONS
+            -h, --help      Show this help text
+_EOF_
+}
+
+# option checking
+while (( $# )); do
+    case $1 in
+        -h|--help) usage; exit 0 ;;
+        *) die "invalid argument: %s" "$1" ;;
+    esac
+done
+
+if [[ ! -f PKGBUILD ]]; then
+    die "This must be run a directory containing a PKGBUILD."
+fi
+
+mapfile -t validpgpkeys < <(
+    # shellcheck source=PKGBUILD.proto
+    . ./PKGBUILD
+    if (( ${#validpgpkeys[@]} )); then
+        printf "%s\n" "${validpgpkeys[@]}"
+    fi
+)
+
+msg "Exporting ${#validpgpkeys[@]} PGP keys..."
+if (( ${#validpgpkeys[@]} == 0 )); then
+    exit 0
+fi
+
+trap 'rm -rf $TEMPDIR' EXIT INT TERM QUIT
+TEMPDIR=$(mktemp -d --tmpdir export-pkgbuild-keys.XXXXXXXXXX)
+
+mkdir -p keys/pgp
+error=0
+
+for key in "${validpgpkeys[@]}"; do
+    gpg --output "$TEMPDIR/$key.asc" --armor --export --export-options export-minimal "$key" 2>/dev/null
+
+    # gpg does not give a non-zero return value if it fails to export...
+    if [[ -f $TEMPDIR/$key.asc ]]; then
+        msg2 "Exported $key"
+        mv "$TEMPDIR/$key.asc" "keys/pgp/$key.asc"
+    else
+        if [[ -f keys/pgp/$key.asc ]]; then
+            warning "Failed to update key: $key"
+        else
+            error "Key unavailable: $key"
+            error=1
+        fi
+    fi
+done
+
+if (( error )); then
+    die "Failed to export all \'validpgpkeys\' entries."
+fi

bin/pkg/find-libdeps.in

@@ -15,7 +15,6 @@
 m4_include(lib/base/message.sh)
 
 set -e
-shopt -s extglob
 
 IGNORE_INTERNAL=0
 
@@ -32,9 +31,9 @@ case $script_mode in
 esac
 
 if [[ -z $1 ]]; then
-    echo "${0##*/} [options] <package file|extracted package dir>"
-    echo "Options:"
-    echo "    --ignore-internal      ignore internal libraries"
+    printf "%s [options] <package file|extracted package dir>\n" "${0##*/}"
+    printf "Options:\n"
+    printf "    --ignore-internal      ignore internal libraries\n"
     exit 1
 fi
 
@@ -51,9 +50,13 @@ else
     pushd "$WORKDIR" >/dev/null
 fi
 
+shopt -s extglob
+
 process_sofile() {
     # extract the library name: libfoo.so
+    shopt -s extglob nullglob
     soname="${sofile%.so?(+(.+([0-9])))}".so
+    shopt -u extglob nullglob
     # extract the major version: 1
     soversion="${sofile##*\.so\.}"
     if [[ "$soversion" = "$sofile" ]] && ((IGNORE_INTERNAL)); then
@@ -61,11 +64,13 @@ process_sofile() {
     fi
     if ! in_array "${soname}=${soversion}-${soarch}" "${soobjects[@]}"; then
         # libfoo.so=1-64
-        echo "${soname}=${soversion}-${soarch}"
+        printf "%s\n" "${soname}=${soversion}-${soarch}"
         soobjects+=("${soname}=${soversion}-${soarch}")
     fi
 }
 
+shopt -u extglob
+
 case $script_mode in
     deps) find_args=(-perm -u+x);;
     provides) find_args=(-name '*.so*');;

bin/pkg/finddeps.in

@@ -17,11 +17,11 @@ m4_include(lib/base/message.sh)
 match=$1
 
 if [[ -z $match ]]; then
-    echo 'Usage: finddeps <depname>'
-    echo ''
-    echo 'Find packages that depend on a given depname.'
-    echo 'Run this script from the top-level directory of your ABS tree.'
-    echo ''
+    printf 'Usage: finddeps <depname>\n'
+    printf '\n'
+    printf 'Find packages that depend on a given depname.\n'
+    printf 'Run this script from the top-level directory of your ABS tree.\n'
+    printf '\n'
     exit 1
 fi
 

bin/pkg/gitearepo.in

@@ -0,0 +1,88 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-21 artoo@artixlinux.org
+# Copyright (C) 2021 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/common.sh)
+
+#{{{ functions
+
+create_repo() {
+    local name="$1"
+    local org="$2"
+    local json url
+
+    json="{ \"auto_init\": true, \"name\":\"$name\", \"gitignores\":\"ArchLinuxPackages\", \"readme\": \"Default\" }"
+
+    url="${GIT_URL}/api/v1/org/$org/repos?access_token=${GIT_TOKEN}"
+
+    msg2 "Create package repo [%s] in org (%s)" "$name" "$org"
+
+    api_post "$url" -H "accept: application/json" \
+                    -H "content-type: application/json" \
+                    -d "$json"
+}
+
+transfer_repo() {
+    local name="$1"
+    local old_owner="$2"
+    local new_owner="landfill" json url
+    local json url
+
+    json="{  \"new_owner\": \"$new_owner\",  \"team_ids\": []}"
+
+    url="${GIT_URL}/api/v1/repos/$old_owner/$name/transfer?access_token=${GIT_TOKEN}"
+
+    msg2 "Transfer package repo [%s] in org (%s)" "$name" "$new_owner"
+
+    api_post "$url" -H  "accept: application/json" \
+                    -H  "Content-Type: application/json" \
+                    -d "$json"
+}
+
+#}}}
+
+usage() {
+    printf "Usage: %s [options]\n" "${0##*/}"
+    printf '    -r <repo>     Repo name\n'
+    printf '    -c            Create git repo\n'
+    printf '    -t            Transfer git repo to landfill org\n'
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
+}
+
+create=false
+transfer=false
+
+opts='r:cth'
+
+while getopts "${opts}" arg; do
+    case "${arg}" in
+        r) repo="$OPTARG" ;;
+        c) create=true ;;
+        t) transfer=true ;;
+        h|?) usage 0 ;;
+    esac
+done
+
+shift $(( OPTIND - 1 ))
+
+org=$(get_pkg_org "${repo}")
+
+${create} && create_repo "${repo}" "${org}"
+
+${transfer} && transfer_repo "${repo}" "${org}"

bin/pkg/lddd.in

@@ -40,7 +40,7 @@ for tree in $PATH $libdirs $extras; do
             #  Is an ELF binary.
             if (( $(ldd "$i" 2>/dev/null | grep -c 'not found') != 0 )); then
                 #  Missing lib.
-                echo "$i:" >> "$TEMPDIR/raw.txt"
+                printf "%s\n" "$i:" >> "$TEMPDIR/raw.txt"
                 ldd "$i" 2>/dev/null | grep 'not found' >> "$TEMPDIR/raw.txt"
             fi
         fi

bin/pkg/links-add.in

@@ -35,7 +35,6 @@ REPO_DB_PREFIX=
 REPO_DB_SUFFIX=
 LOCKFILE=
 CLEAN_LOCK=0
-# PREVENT_DOWNGRADE=0
 
 # ensure we have a sane umask set
 umask 0022
@@ -53,7 +52,6 @@ Multiple packages to add can be specified on the command line.\n"
         printf -- "\n"
         printf -- "Options:\n"
         printf -- "  -n, --new         only add packages that are not already in the database\n"
-#         printf -- "$(gettext "  -p, --prevent-downgrade  do not add package to database if a newer version is already present\n")"
     elif [[ $cmd == "links-remove" ]] ; then
         printf -- "Usage: links-remove [options] <path-to-db> <packagename> ...\n"
         printf -- "\n"
@@ -89,7 +87,7 @@ find_pkgentry() {
     for pkgentry in "$tmpdir/${REPO_DB_NAME}/$pkgname"*; do
         name=${pkgentry##*/}
         if [[ ${name%-*-*} = "$pkgname" ]]; then
-            echo "$pkgentry"
+            printf "%s\n" "$pkgentry"
             return 0
         fi
     done
@@ -103,7 +101,7 @@ check_gpg() {
     fi
 
     if (( ! VERIFY )); then
-        if ! gpg --list-key "${GPGKEY}" &>/dev/null; then
+        if ! gpg --list-secret-key ${GPGKEY:+"$GPGKEY"} &>/dev/null; then
             if [[ -n "$GPGKEY" ]]; then
                 error "The key ${GPGKEY} does not exist in your keyring."
             elif (( ! KEY )); then
@@ -121,11 +119,11 @@ create_signature() {
     local ret=0
     msg "Signing database '%s'..." "${dbfile##*/.tmp.}"
 
-    local SIGNWITHKEY=""
+    local SIGNWITHKEY=()
     if [[ -n $GPGKEY ]]; then
-        SIGNWITHKEY="-u ${GPGKEY}"
+        SIGNWITHKEY=(-u "${GPGKEY}")
     fi
-    gpg --detach-sign --use-agent --no-armor "${SIGNWITHKEY}" "$dbfile" &>/dev/null || ret=$?
+    gpg --detach-sign --use-agent --no-armor "${SIGNWITHKEY[@]}" "$dbfile" &>/dev/null || ret=$?
 
     if (( ! ret )); then
         msg2 "Created signature file '%s'" "${dbfile##*/.tmp.}.sig"
@@ -155,21 +153,13 @@ verify_signature() {
 }
 
 verify_repo_extension() {
-    local repofile=$1
+    local junk=()
+    if [[ $1 = *.links.tar* ]] && get_compression_command "$1" junk; then
+        return 0
+    fi
 
-    case $repofile in
-        *.links.tar.gz)  TAR_OPT="z" ;;
-        *.links.tar.bz2) TAR_OPT="j" ;;
-        *.links.tar.xz)  TAR_OPT="J" ;;
-        *.links.tar.zst) TAR_OPT="--zstd" ;;
-        *.links.tar.Z)   TAR_OPT="Z" ;;
-        *.links.tar)     TAR_OPT="" ;;
-        *) error "'%s' does not have a valid database archive extension." \
-                "$repofile"
-            exit 1 ;;
-    esac
-
-    printf '%s' "$TAR_OPT"
+    error "'%s' does not have a valid database archive extension." "$1"
+    exit 1
 }
 
 # write an entry to the pacman database
@@ -201,18 +191,6 @@ db_write_entry() {
         if (( ONLYADDNEW )); then
             return 0
         fi
-#     else
-#         pkgentry=$(find_pkgentry "$pkgname")
-#         if [[ -n $pkgentry ]]; then
-#
-#             local version=$(sed -n '/^%VERSION%$/ {n;p;q}' "$pkgentry/desc")
-#             if (( $(vercmp "$version" "$pkgver") > 0 )); then
-#                 warning "$(gettext "A newer version for '%s' is already present in database")" "$pkgname"
-#                 if (( PREVENT_DOWNGRADE )); then
-#                     return 0
-#                 fi
-#             fi
-#         fi
     fi
 
     # remove an existing entry if it exists, ignore failures
@@ -260,7 +238,7 @@ db_remove_entry() {
 
         # remove entries in "links" database
         local linksentry
-        linksentry=$(echo "$pkgentry" | sed 's/\(.*\)\/db\//\1\/links\//')
+        linksentry=$(printf "%s\n" "$pkgentry" | sed 's/\(.*\)\/db\//\1\/links\//')
         rm -rf "$linksentry"
 
         pkgentry=$(find_pkgentry "$pkgname")
@@ -280,7 +258,7 @@ prepare_repo_db() {
     fi
 
     # check lock file
-    if ( set -o noclobber; echo "$$" > "$LOCKFILE") 2> /dev/null; then
+    if ( set -o noclobber; printf "%s\n" "$$" > "$LOCKFILE") 2> /dev/null; then
         CLEAN_LOCK=1
     else
         error "Failed to acquire lockfile: %s." "$LOCKFILE"
@@ -397,7 +375,6 @@ rotate_db() {
 }
 
 create_db() {
-    TAR_OPT=$(verify_repo_extension "$REPO_DB_FILE")
     # $LOCKFILE is already guaranteed to be absolute so this is safe
     dirname=${LOCKFILE%/*}
 
@@ -406,13 +383,13 @@ create_db() {
     tempname=$dirname/.tmp.$filename
 
     pushd "$tmpdir/${REPO_DB_NAME}" >/dev/null
-    if ( shopt -s nullglob; files=(*); (( ${#files[*]} )) ); then
-        bsdtar -c"${TAR_OPT}"f "$tempname" *
-    else
+    local files=(*)
+    if [[ ${files[*]} = '*' ]]; then
         # we have no packages remaining? zip up some emptyness
         warning "No packages remain, creating empty database."
-        bsdtar -c"${TAR_OPT}"f "$tempname" -T /dev/null
+        files=(-T /dev/null)
     fi
+    bsdtar -cf - "${files[@]}" | compress_as "$filename" > "$tempname"
     popd >/dev/null
 
     create_signature "$tempname"
@@ -422,7 +399,7 @@ trap_exit() {
     # unhook all traps to avoid race conditions
     trap '' EXIT TERM HUP QUIT INT ERR
 
-    echo
+    printf '\n'
     error "$@"
     clean_up 1
 }
@@ -476,7 +453,6 @@ while (( $# )); do
         -s|--sign) SIGN=1 ;;
         -k|--key) KEY=1 ; shift; GPGKEY=$1 ;;
         -v|--verify) VERIFY=1 ;;
-#         -p|--prevent-downgrade) PREVENT_DOWNGRADE=1 ;;
         *) args+=("$1") ;;
     esac
     shift
@@ -494,7 +470,7 @@ else
     LOCKFILE=$PWD/$REPO_DB_FILE.lck
 fi
 
-verify_repo_extension "$REPO_DB_FILE" >/dev/null
+verify_repo_extension "$REPO_DB_FILE"
 
 REPO_DB_PREFIX=${REPO_DB_FILE##*/}
 REPO_DB_PREFIX=${REPO_DB_PREFIX%.links.*}

bin/pkg/makerepropkg.in

@@ -0,0 +1,271 @@
+#!/bin/bash
+#
+# makerepropkg - rebuild a package to see if it is reproducible
+#
+# Copyright (c) 2019 by Eli Schwartz <eschwartz@archlinux.org>
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+m4_include(lib/util-base.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/base/chroot.sh)
+m4_include(lib/base/chroot.sh)
+
+declare -A buildinfo
+declare -a buildenv buildopts installed installpkgs
+
+archiveurl='https://archive.artixlinux.org/packages'
+buildroot="${CHROOTS_DIR}"/reproducible
+diffoscope=0
+
+chroot=$USER
+[[ -n ${SUDO_USER:-} ]] && chroot=$SUDO_USER
+[[ -z "$chroot" || $chroot = root ]] && chroot=copy
+
+parse_buildinfo() {
+    local line var val
+
+    while read -r line; do
+        var="${line%% = *}"
+        val="${line#* = }"
+        case ${var} in
+            buildenv)
+                buildenv+=("${val}")
+                ;;
+            options)
+                buildopts+=("${val}")
+                ;;
+            installed)
+                installed+=("${val}")
+                ;;
+            *)
+                buildinfo["${var}"]="${val}"
+                ;;
+        esac
+    done
+}
+
+get_pkgfile() {
+    local cdir=${cache_dirs[0]}
+    local pkgfilebase=${1}
+    local mode=${2}
+    local pkgname=${pkgfilebase%-*-*-*}
+    local pkgfile ext
+
+    # try without downloading
+    if [[ ${mode} != localonly ]] && get_pkgfile "${pkgfilebase}" localonly; then
+        return 0
+    fi
+
+    for ext in .zst .xz ''; do
+        pkgfile=${pkgfilebase}.pkg.tar${ext}
+
+        for c in "${cache_dirs[@]}"; do
+            if [[ -f ${c}/${pkgfile} ]]; then
+                cdir=${c}
+                break
+            fi
+        done
+
+        for f in "${pkgfile}" "${pkgfile}.sig"; do
+            if [[ ! -f "${cdir}/${f}" ]]; then
+                if [[ ${mode} = localonly ]]; then
+                    continue 2
+                fi
+                msg2 "retrieving '%s'..." "${f}" >&2
+                curl -Llf -# -o "${cdir}/${f}" "${archiveurl}/${pkgname:0:1}/${pkgname}/${f}" || continue 2
+            fi
+        done
+        printf '%s\n' "file://${cdir}/${pkgfile}"
+        return 0
+    done
+
+    return 1
+}
+
+get_makepkg_conf() {
+    local fname=${1}
+    local makepkg_conf="${2}"
+    if ! buildtool_file=$(get_pkgfile "${fname}"); then
+        error "failed to retrieve ${fname}"
+        return 1
+    fi
+    msg2 "using makepkg.conf from ${fname}"
+    bsdtar xOqf "${buildtool_file/file:\/\//}" usr/share/artools/makepkg.conf > "${makepkg_conf}"
+    return 0
+}
+
+usage() {
+    cat << __EOF__
+    usage: ${BASH_SOURCE[0]##*/} [options] <package_file>
+
+    Run this script in a PKGBUILD dir to build a package inside a
+    clean chroot while attempting to reproduce it. The package file
+    will be used to derive metadata needed for reproducing the
+    package, including the .PKGINFO as well as the buildinfo.
+
+    For more details see https://reproducible-builds.org/
+
+    OPTIONS
+        -d            Run diffoscope if the package is unreproducible
+        -c <dir>      Set pacman cache
+        -M <file>     Location of a makepkg config file
+        -l <chroot>   The directory name to use as the chroot namespace
+                    Useful for maintaining multiple copies
+                    Default: $chroot
+        -h            Show this usage message
+__EOF__
+}
+
+while getopts 'dM:c:l:h' arg; do
+    case "$arg" in
+        d) diffoscope=1 ;;
+        M) artixroot_args+=(-M "$OPTARG") ;;
+        c) cache_dirs+=("$OPTARG") ;;
+        l) chroot="$OPTARG" ;;
+        h) usage; exit 0 ;;
+        *|?) usage; exit 1 ;;
+    esac
+done
+shift $((OPTIND - 1))
+
+check_root
+
+[[ -f PKGBUILD ]] || { error "No PKGBUILD in current directory."; exit 1; }
+
+# without arguments, get list of packages from PKGBUILD
+if [[ -z $1 ]]; then
+    mapfile -t pkgnames < <(source PKGBUILD; pacman -Sddp --print-format '%r/%n' "${pkgname[@]}")
+    wait $! || {
+        error "No package file specified and failed to retrieve package names from './PKGBUILD'."
+        plain "Try '${BASH_SOURCE[0]##*/} -h' for more information." >&2
+        exit 1
+    }
+    msg "Reproducing all pkgnames listed in ./PKGBUILD"
+    set -- "${pkgnames[@]}"
+fi
+
+# check each package to see if it's a file, and if not, try to download it
+# using pacman -Sw, and get the filename from there
+splitpkgs=()
+for p in "$@"; do
+    if [[ -f ${p} ]]; then
+        splitpkgs+=("${p}")
+    else
+        pkgfile_remote=$(pacman -Sddp "${p}" 2>/dev/null) || { error "package name '%s' not in repos" "${p}"; exit 1; }
+        pkgfile=${pkgfile_remote#file://}
+        if [[ ! -f ${pkgfile} ]]; then
+            msg "Downloading package '%s' into pacman's cache" "${pkgfile}"
+            sudo pacman -Swdd --noconfirm --logfile /dev/null "${p}" || exit 1
+            pkgfile_remote=$(pacman -Sddp "${p}" 2>/dev/null)
+            pkgfile="${pkgfile_remote#file://}"
+        fi
+        splitpkgs+=("${pkgfile}")
+    fi
+done
+
+for f in "${splitpkgs[@]}"; do
+    if ! bsdtar -tqf "${f}" .BUILDINFO >/dev/null 2>&1; then
+        error "file is not a valid pacman package: '%s'" "${f}"
+        exit 1
+    fi
+done
+
+if (( ${#cache_dirs[@]} == 0 )); then
+	mapfile -t cache_dirs < <(pacman-conf CacheDir)
+fi
+
+ORIG_HOME=${HOME}
+IFS=: read -r _ _ _ _ _ HOME _ < <(getent passwd "${SUDO_USER:-$USER}")
+load_makepkg_config
+HOME=${ORIG_HOME}
+[[ -d ${SRCDEST} ]] || SRCDEST=${PWD}
+
+parse_buildinfo < <(bsdtar -xOqf "${splitpkgs[0]}" .BUILDINFO)
+export SOURCE_DATE_EPOCH="${buildinfo[builddate]}"
+PACKAGER="${buildinfo[packager]}"
+BUILDDIR="${buildinfo[builddir]}"
+BUILDTOOL="${buildinfo[buildtool]}"
+BUILDTOOLVER="${buildinfo[buildtoolver]}"
+PKGEXT=${splitpkgs[0]#${splitpkgs[0]%.pkg.tar*}}
+
+# nuke and restore reproducible testenv
+namespace="$buildroot/$chroot"
+lock 9 "${namespace}.lock" "Locking chroot namespace '%s'" "${namespace}"
+for copy in "${namespace}"/*/; do
+    [[ -d ${copy} ]] || continue
+    subvolume_delete_recursive "${copy}"
+done
+rm -rf --one-file-system "${namespace}"
+(umask 0022; mkdir -p "${namespace}")
+
+for fname in "${installed[@]}"; do
+    if ! allpkgfiles+=("$(get_pkgfile "${fname}")"); then
+        error "failed to retrieve ${fname}"
+        exit 1
+    fi
+done
+
+trap 'rm -rf $TEMPDIR' EXIT INT TERM QUIT
+TEMPDIR=$(mktemp -d --tmpdir makerepropkg.XXXXXXXXXX)
+
+makepkg_conf="${TEMPDIR}/makepkg.conf"
+# anything before buildtool support is pinned to the last none buildtool aware release
+if [[ -z "${BUILDTOOL}" ]]; then
+    get_makepkg_conf "artools-pkg-0.28.2-1-any" "${makepkg_conf}" || exit 1
+# prefere to assume artools-pkg up until matching makepkg version so repository packages remain reproducible
+elif [[ "${BUILDTOOL}" = makepkg ]] && (( $(vercmp "${BUILDTOOLVER}" 6.0.1) <= 0 )); then
+    get_makepkg_conf "artools-pkg-0.28.2-1-any" "${makepkg_conf}" || exit 1
+# all artools-pkg builds
+elif [[ "${BUILDTOOL}" = artools-pkg ]] && get_makepkg_conf "${BUILDTOOL}-${BUILDTOOLVER}" "${makepkg_conf}"; then
+    true
+# fallback to current makepkg.conf
+else
+    warning "Unknown buildtool (${BUILDTOOL}-${BUILDTOOLVER}), using fallback"
+    makepkg_conf="${DATADIR}"/makepkg.conf
+fi
+printf '%s\n' "${allpkgfiles[@]}" | mkchroot -M "${makepkg_conf}" -U "${artixroot_args[@]}" "${namespace}/root" - || exit 1
+
+# use makechrootpkg to prep the build directory
+mkchrootpkg -r "${namespace}" -l build -- --packagelist || exit 1
+
+# set detected makepkg.conf options
+{
+    for var in PACKAGER BUILDDIR BUILDTOOL BUILDTOOLVER PKGEXT; do
+        printf '%s=%s\n' "${var}" "${!var@Q}"
+    done
+    printf 'OPTIONS=(%s)\n' "${buildopts[*]@Q}"
+    printf 'BUILDENV=(%s)\n' "${buildenv[*]@Q}"
+} >> "${namespace}/build"/etc/makepkg.conf
+install -d -o "${SUDO_UID:-$UID}" -g "$(id -g "${SUDO_UID:-$UID}")" "${namespace}/build/${BUILDDIR}"
+
+bindmounts+=("-B:${PWD}:/startdir" "-B:${SRCDEST}:/srcdest")
+
+# kick off the build
+chroot-run \
+    -b "${bindmounts[*]}" \
+    "${namespace}/build" \
+    /chrootbuild -C --noconfirm --log --holdver --skipinteg
+ret=$?
+
+if (( ${ret} == 0 )); then
+    msg2 "built succeeded! built packages can be found in ${namespace}/build/pkgdest"
+    msg "comparing artifacts..."
+
+    for pkgfile in "${splitpkgs[@]}"; do
+        comparefiles=("${pkgfile}" "${namespace}/build/pkgdest/${pkgfile##*/}")
+        if cmp -s "${comparefiles[@]}"; then
+            msg2 "Package '%s' successfully reproduced!" "${pkgfile}"
+        else
+            ret=1
+            warning "Package '%s' is not reproducible. :(" "${pkgfile}"
+            sha256sum "${comparefiles[@]}"
+            if (( diffoscope )); then
+                diffoscope "${comparefiles[@]}"
+            fi
+        fi
+    done
+fi
+
+# return failure from chrootbuild, or the reproducibility status
+exit ${ret}

bin/pkg/mkchrootpkg.in

@@ -15,6 +15,9 @@
 m4_include(lib/base/message.sh)
 m4_include(lib/base/chroot.sh)
 
+export BUILDTOOL=artools-pkg
+export BUILDTOOLVER=m4_artools_pkg_version
+
 shopt -s nullglob
 
 default_makepkg_args=(--syncdeps --noconfirm --log --holdver --skipinteg)
@@ -41,43 +44,43 @@ copy=$USER
 src_owner=${SUDO_USER:-$USER}
 
 usage() {
-    echo "Usage: ${0##*/} [options] -r <chrootdir> [--] [makepkg args]"
-    echo ' Run this script in a PKGBUILD dir to build a package inside a'
-    echo ' clean chroot. Arguments passed to this script after the'
-    echo ' end-of-options marker (--) will be passed to makepkg.'
-    echo ''
-    echo ' The chroot dir consists of the following directories:'
-    echo ' <chrootdir>/{root, copy} but only "root" is required'
-    echo ' by default. The working copy will be created as needed'
-    echo ''
-    echo 'The chroot "root" directory must be created via the following'
-    echo 'command:'
-    echo '    mkchroot <chrootdir>/root base-devel'
-    echo ''
-    echo 'This script reads {SRC,SRCPKG,PKG,LOG}DEST, MAKEFLAGS and PACKAGER'
-    echo 'from makepkg.conf(5), if those variables are not part of the'
-    echo 'environment.'
-    echo ''
-    echo "Default makepkg args: ${default_makepkg_args[*]}"
-    echo ''
-    echo 'Flags:'
-    echo '-h         This help'
-    echo '-c         Clean the chroot before building'
-    echo '-d <dir>   Bind directory into build chroot as read-write'
-    echo '-D <dir>   Bind directory into build chroot as read-only'
-    echo '-u         Update the working copy of the chroot before building'
-    echo '           This is useful for rebuilds without dirtying the pristine'
-    echo '           chroot'
-    echo '-r <dir>   The chroot dir to use'
-    echo '-I <pkg>   Install a package into the working copy of the chroot'
-    echo '-l <copy>  The directory to use as the working copy of the chroot'
-    echo '           Useful for maintaining multiple copies'
-    echo "           Default: $copy"
-    echo '-n         Run namcap on the package'
-    echo '-C         Run checkpkg on the package'
-    echo '-N         Disable check() function'
-    echo '-T         Build in a temporary directory'
-    echo '-U         Run makepkg as a specified user'
+    printf 'Usage: %s [options] -r <chrootdir> [--] [makepkg args]\n' "${0##*/}"
+    printf ' Run this script in a PKGBUILD dir to build a package inside a\n'
+    printf ' clean chroot. Arguments passed to this script after the\n'
+    printf ' end-of-options marker (--) will be passed to makepkg.\n'
+    printf '\n'
+    printf ' The chroot dir consists of the following directories:\n'
+    printf ' <chrootdir>/{root, copy} but only "root" is required\n'
+    printf ' by default. The working copy will be created as needed\n'
+    printf '\n'
+    printf "The chroot 'root' directory must be created via the following\n"
+    printf 'command:\n'
+    printf '    mkchroot <chrootdir>/root base-devel\n'
+    printf '\n'
+    printf 'This script reads {SRC,SRCPKG,PKG,LOG}DEST, MAKEFLAGS and PACKAGER\n'
+    printf 'from makepkg.conf(5), if those variables are not part of the\n'
+    printf 'environment.\n'
+    printf '\n'
+    printf 'Default makepkg args: %s\n' "${default_makepkg_args[*]}"
+    printf '\n'
+    printf 'Flags:\n'
+    printf ' -h         This help\n'
+    printf ' -c         Clean the chroot before building\n'
+    printf ' -d <dir>   Bind directory into build chroot as read-write\n'
+    printf ' -D <dir>   Bind directory into build chroot as read-only\n'
+    printf ' -u         Update the working copy of the chroot before building\n'
+    printf '           This is useful for rebuilds without dirtying the pristine\n'
+    printf '           chroot\n'
+    printf ' -r <dir>   The chroot dir to use\n'
+    printf ' -I <pkg>   Install a package into the working copy of the chroot\n'
+    printf ' -l <copy>  The directory to use as the working copy of the chroot\n'
+    printf '            Useful for maintaining multiple copies\n'
+    printf '            Default: %s\n' "$copy"
+    printf ' -n         Run namcap on the package\n'
+    printf ' -C         Run checkpkg on the package\n'
+    printf ' -N         Disable check() function\n'
+    printf ' -T         Build in a temporary directory\n'
+    printf ' -U         Run makepkg as a specified user\n'
     exit 1
 }
 
@@ -179,7 +182,7 @@ prepare_chroot() {
         "MAKEFLAGS='${MAKEFLAGS:-}'" "PACKAGER='${PACKAGER:-}'"
     do
         grep -q "^$x" "$copydir/etc/makepkg.conf" && continue
-        echo "$x" >>"$copydir/etc/makepkg.conf"
+        printf "%s\n" "$x" >>"$copydir/etc/makepkg.conf"
     done
 
     cat > "$copydir/etc/sudoers.d/builduser-pacman" <<EOF
@@ -193,6 +196,8 @@ EOF
         printf '#!/bin/bash\n'
         declare -f _chrootbuild
         declare -p SOURCE_DATE_EPOCH 2>/dev/null || true
+        declare -p BUILDTOOL 2>/dev/null
+		declare -p BUILDTOOLVER 2>/dev/null
         printf '_chrootbuild "$@" || exit\n'
 
         if (( run_namcap )); then
@@ -218,7 +223,10 @@ _chrootbuild() {
     # use "$" in arguments to commands with "sudo -i".  ${foo} or
     # ${1} is OK, but $foo or $1 isn't.
     # https://bugzilla.sudo.ws/show_bug.cgi?id=765
-    sudo --preserve-env=SOURCE_DATE_EPOCH -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
+    sudo --preserve-env=SOURCE_DATE_EPOCH \
+        -preserve-env=BUILDTOOL \
+		--preserve-env=BUILDTOOLVER \
+        -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
     ret=$?
     case $ret in
         0|14)
@@ -231,7 +239,7 @@ _chrootbuild() {
 _chrootnamcap() {
     pacman -S --needed --noconfirm namcap
     for pkgfile in /startdir/PKGBUILD /pkgdest/*; do
-        echo "Checking ${pkgfile##*/}"
+        printf "Checking %s\n" "${pkgfile##*/}"
         sudo -u builduser namcap "$pkgfile" 2>&1 | tee "/logdest/${pkgfile##*/}-namcap.log"
     done
 }
@@ -241,7 +249,7 @@ download_sources() {
     chown "$makepkg_user:" "$WORKDIR"
 
     # Ensure sources are downloaded
-    sudo -u "$makepkg_user" --preserve-env=GNUPGHOME \
+    sudo -u "$makepkg_user" --preserve-env=GNUPGHOME,SSH_AUTH_SOCK \
         env SRCDEST="$SRCDEST" BUILDDIR="$WORKDIR" \
         makepkg --config="$copydir/etc/makepkg.conf" --verifysource -o "${verifysource_args[@]}" ||
         die "Could not download sources."
@@ -305,7 +313,7 @@ done
 [[ -n $makepkg_user && -z $(id -u "$makepkg_user") ]] && die 'Invalid makepkg user.'
 makepkg_user=${makepkg_user:-${SUDO_USER:-$USER}}
 
-check_root SOURCE_DATE_EPOCH,GNUPGHOME,SRCDEST,SRCPKGDEST,PKGDEST,LOGDEST,MAKEFLAGS,PACKAGER
+check_root SOURCE_DATE_EPOCH,BUILDTOOL,BUILDTOOLVER,GNUPGHOME,SRCDEST,SRCPKGDEST,PKGDEST,LOGDEST,MAKEFLAGS,PACKAGER
 
 # Canonicalize chrootdir, getting rid of trailing /
 chrootdir=$(readlink -e "$passeddir")
@@ -321,13 +329,14 @@ fi
 # Pass all arguments after -- right to makepkg
 makepkg_args+=("${@:$OPTIND}")
 
-# See if -R or -e was passed to makepkg
+# See if -R, -e or -A was passed to makepkg
 for arg in "${@:$OPTIND}"; do
     case ${arg%%=*} in
-        --skip*|--holdver) verifysource_args+=("$arg") ;;
+        --skip*|--holdver|--ignorearch) verifysource_args+=("$arg") ;;
         --repackage|--noextract) keepbuilddir=1 ;;
         --*) ;;
-        -*R*|-*e*) keepbuilddir=1 ;;
+        -*A*) verifysource_args+=(-A) ;;&
+        -*R*|-*e*) keepbuilddir=1 ;;&
     esac
 done
 

bin/pkg/mkdepgraph.in

@@ -0,0 +1,77 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-19 artoo@artixlinux.org
+# Copyright (C) 2018 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+mk_tree_graph(){
+    printf "%s\n" "$(pactree "${tree_args[@]}" "${package}")" \
+        | dot -T "${ext}" > "${graph_dir}/${package}.${ext}"
+}
+
+mk_rebuild_graph(){
+    local tmpfile
+    tmpfile=/tmp/rebuild.dot
+    rebuild_args+=(-d "${tmpfile}")
+    artix-rebuild-order "${packages[@]}" "${rebuild_args[@]}"
+    dot -T "${ext}" "${tmpfile}" > "${graph_dir}/rebuild.${ext}"
+    rm -f "${tmpfile}"
+}
+
+usage() {
+    printf "Usage: %s [options] <package|packages>\n" "${0##*/}"
+    printf "    -m <tree|rebuild>    default mode: [%s]\n" "$mode"
+    printf "                         rebuild mode accepts packages input\n"
+    printf "    -r                   list packages that depend on the named package (tree)\n"
+    printf "    -u                   show dependencies with no duplicates  (tree)\n"
+    printf "    -d <#>               limit the depth of recursion  (tree)\n"
+    printf "                         default: [%s]\n" "$depth"
+    printf "    -o <#>               controls at which depth to stop printing optional deps\n"
+    printf "                         default: [%s]\n" "$optdepth"
+    printf "                         (-1 for no limit)  (tree)\n"
+    printf "    -i                   only use the pkgnames provided as input (rebuild)\n"
+    printf "    -h                   display this help message\n"
+    exit "$1"
+}
+
+graph_dir=${XDG_PICTURES_DIR:-$(xdg-user-dir PICTURES)/artix}
+ext="png"
+
+mode=tree
+
+tree_args=(-gs)
+rebuild_args=()
+
+depth=0
+optdepth=-1
+
+opts=':m:d:o:iruh'
+
+while getopts "$opts" arg; do
+    case "${arg}" in
+        m) mode="$OPTARG" ;;
+        r) tree_args+=(-r) ;;
+        u) tree_args+=(-ul) ;;
+        d) depth="$OPTARG"; tree_args+=(-d "$depth") ;;
+        o) optdepth="$OPTARG"; tree_args+=(-o"$optdepth") ;;
+        i) rebuild_args+=(--no-reverse-depends) ;;
+        h|?) usage 0 ;;
+    esac
+done
+shift $(( OPTIND - 1 ))
+
+[[ -d "${graph_dir}" ]] || mkdir -p "${graph_dir}"
+
+case "$mode" in
+    tree) package=("$@"); mk_tree_graph ;;
+    rebuild) packages=("$@"); mk_rebuild_graph ;;
+    *) usage 1 ;;
+esac

bin/pkg/pkg2yaml.in

@@ -17,6 +17,24 @@ m4_include(lib/base/yaml.sh)
 
 #{{{ functions
 
+print_package_names() {
+    local version=$(get_full_version)
+    local architecture pkg
+    for pkg in ${pkgname[@]}; do
+        architecture=$(get_pkg_arch $pkg)
+        printf "%s/%s-%s-%s%s\n" "$PKGDEST" "$pkg" "$version" "$architecture" "$PKGEXT"
+    done
+}
+
+print_debug_package_names() {
+    local version=$(get_full_version)
+    local architecture
+    if check_option "debug" "y" && check_option "strip" "y"; then
+        architecture=$(get_pkg_arch)
+        printf "%s/%s-%s-%s-%s%s\n" "$PKGDEST" "$pkgbase" "debug" "$version" "$architecture" "$PKGEXT"
+    fi
+}
+
 srcyaml_write_attr(){
     local ident1="$1" ident2="$2" ident3="$3"
     local attrname=$4 attrvalues=("${@:5}")
@@ -108,13 +126,19 @@ yaml_write_fileinfo(){
     pkgbase=${pkgbase:-$pkgname}
     Yaml+=$(write_yaml_map 0 "version" "${version:-0}")
     Yaml+=$(write_empty_line)
-    local pkgfile
-    pkgfile=$(print_all_package_names)
+    local pkgfile debug_pkg
+    pkgfile=$(print_package_names)
     Yaml+=$(write_yaml_map 0 "files")
     for f in ${pkgfile}; do
         Yaml+=$(write_yaml_seq 2 "${f##*/}")
     done
     Yaml+=$(write_empty_line)
+    debug_pkg=$(print_debug_package_names)
+    Yaml+=$(write_yaml_map 0 "debug")
+    for d in ${debug_pkg}; do
+        Yaml+=$(write_yaml_seq 2 "${d##*/}")
+    done
+    Yaml+=$(write_empty_line)
 }
 
 write_srcyaml(){
@@ -122,16 +146,16 @@ write_srcyaml(){
     yaml_write_global
     yaml_write_package
     yaml_write_fileinfo
-    printf '%s' "${Yaml}"
+    printf '%s\n' "${Yaml}"
 }
 
 #}}}
 
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo "    -d            Don't include details"
-    echo '    -h            This help'
-    echo ''
+    printf 'Usage: %s [options]\n' "${0##*/}"
+    printf '    -d            Do not include details\n'
+    printf '    -h            This help\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -143,7 +167,6 @@ while getopts "${opts}" arg; do
     case "${arg}" in
         d) details=false ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/tidyarch.in

@@ -0,0 +1,202 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-20 artoo@artixlinux.org
+# Copyright (C) 2018 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/repo.sh)
+
+git_rm() {
+    local r="$1"
+    if ! "$run_f"; then
+        printf "git rm -r %s\n" "$r"
+        printf "git commit -m 'remove %s'\n" "${r##*/}"
+    else
+        git rm -r  "$r"
+        git commit -m "remove ${r##*/}"
+    fi
+}
+
+compare_ver() {
+    local a="$1" b="$2" tree="$3" func="$4" va vb
+    # shellcheck disable=1090
+    source "$a"/PKGBUILD 2>/dev/null
+    va=$(get_full_version)
+    unset pkgver epoch pkgrel arch
+    # shellcheck disable=1090
+    source "$b"/PKGBUILD 2>/dev/null
+    vb=$(get_full_version)
+    unset pkgver epoch pkgrel arch
+    msg2 "a: %s b: %s" "$va" "$vb"
+    local ret
+    ret=$(vercmp "$va" "$vb")
+    msg2 "ret: %s" "$ret"
+    if [ "$ret" -gt 0 ]; then
+        git_rm "$b"
+    elif [ "$ret" -lt 0 ]; then
+        git_rm "$a"
+    else
+        case "$tree" in
+            "${ARCH_TREE[0]}") git_rm "$a" ;;
+            "${ARCH_TREE[1]}") git_rm "$b" ;;
+        esac
+    fi
+}
+
+check_duplicates() {
+    mapfile -t duplicates < <(find "${TREE_DIR_ARCH}" -mindepth 2 -maxdepth 2 -type d -not -path "*.git" -printf '%f\n' | sort | uniq -d)
+
+    for p in "${duplicates[@]}"; do
+        msg "%s" "$p"
+        local av bv a b
+
+        a="${TREE_DIR_ARCH}/${ARCH_TREE[0]}"
+        # shellcheck disable=1090
+        source "$a/$p"/trunk/PKGBUILD 2>/dev/null
+        av=$(get_full_version)
+
+        b="${TREE_DIR_ARCH}/${ARCH_TREE[1]}"
+        # shellcheck disable=1090
+        source "$b/$p"/trunk/PKGBUILD 2>/dev/null
+        bv=$(get_full_version)
+
+        msg2 "a: %s b: %s" "$av" "$bv"
+        ret=$(vercmp "$av" "$bv")
+        msg2 "ret: %s" "$ret"
+
+        if [ "$ret" -gt 0 ]; then
+            cd "$b"
+            msg2 "%s" "${b##*/}"
+            git_rm "$p"
+        elif [ "$ret" -lt 0 ]; then
+            cd "$a"
+            msg2 "%s" "${a##*/}"
+            git_rm "$p"
+        fi
+    done
+}
+# git config core.mergeoptions --no-edit
+check_tree() {
+    for tree in "${ARCH_TREE[@]}"; do
+        cd "${TREE_DIR_ARCH}/$tree" || exit
+
+        mapfile -t pkgs < <(find . -mindepth 2 -maxdepth 2 -type d -name repos | sort)
+
+        for p in "${pkgs[@]}"; do
+
+            mapfile -t repos < <(find "$p" -mindepth 1 -maxdepth 1 -type d -printf '%f\n' | sort)
+
+            local repos_dir=$p
+            p=${p%/*}
+            p=${p##*/}
+            local size=${#repos[@]}
+
+            if (( "$size" > 1 )); then
+                if [[ "${repos[1]}" != "${valid_names[11]}"-* ]] || [[ "${repos[1]}" != "${valid_names[12]}"-* ]]; then
+
+                    local a="$repos_dir/${repos[0]}" b="$repos_dir/${repos[1]}"
+
+                    # repo mismatches
+                    if [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[1]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[7]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[4]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[0]}"-* ]] && [[ "${repos[1]}" == "${valid_names[1]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[0]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[3]}"-* ]] && [[ "${repos[1]}" == "${valid_names[7]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[3]}"-* ]] && [[ "${repos[1]}" == "${valid_names[4]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+                    fi
+
+                    # same repo name but different arch
+                    if [[ "${repos[0]}" == "${valid_names[0]}"-any ]] && [[ "${repos[1]}" == "${valid_names[0]}"-"$CARCH" ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[1]}"-any ]] && [[ "${repos[1]}" == "${valid_names[1]}"-"$CARCH" ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-any ]] && [[ "${repos[1]}" == "${valid_names[2]}"-"$CARCH" ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+                    fi
+                fi
+            fi
+        done
+    done
+}
+
+usage() {
+    printf 'Usage: %s\n' "${0##*/}"
+    printf '    -f                 Apply filter\n'
+    printf '    -r                 Run removal\n'
+    printf '    -d                 Check for duplicates\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
+}
+
+load_makepkg_config
+
+load_valid_names
+
+filter=false
+dupl=false
+run_f=false
+
+opts='hrfd'
+
+while getopts ${opts} arg; do
+    case "${arg}" in
+        f) filter=true ;;
+        r) run_f=true ;;
+        d) dupl=true ;;
+        h|?) usage 0 ;;
+    esac
+done
+shift $(( OPTIND - 1 ))
+
+"$filter" && check_tree
+
+"$dupl" && check_duplicates

data/conf/artools-iso.conf

@@ -8,8 +8,14 @@
 # the dist release; default: auto
 # ISO_VERSION=$(date +%Y%m%d)
 
-# possible values: openrc, runit, s6
+# possible values: openrc, runit, s6, suite66, dinit
 # INITSYS="openrc"
 
 # gpg key; leave empty or commented to skip img signing
 # GPG_KEY=""
+
+# possible values: zstd (default), xz
+# COMPRESSION="zstd"
+
+# zstd only: range 1..22
+# COMPRESSION_LEVEL=15

data/conf/artools-pkg.conf

@@ -7,28 +7,13 @@
 
 # TREE_DIR_ARTIX=${WORKSPACE_DIR}/artixlinux
 
-# customize buildtree; uncomment to include
-# TREE_NAMES_ARTIX=(
-#         packages-kernel
-#         packages-openrc
-#         packages-runit
-#         packages-s6
-#         packages-python
-#         packages-perl
-#         packages-java
-#         packages-ruby
-#         packages-kf5
-#         packages-plasma
-#         packages-kde
-#         packages-gnome
-#         packages-cinnamon
-#         packages-lxqt
-#         packages-mate
-#         packages-xfce
-#         packages-wm
-#         packages-devel
-#         packages-lib32
-#         packages-qt6
+# customize buildtree
+# ARTIX_TREE=(
+#     main
+#     initsys
+#     desktop
+#     addons
+#     lib32
 # )
 
 # TREE_DIR_ARCH=${WORKSPACE_DIR}/archlinux

data/pacman/makepkg.conf

@@ -11,11 +11,11 @@
 #
 #-- The download utilities that makepkg should use to acquire sources
 #  Format: 'protocol::agent'
-DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
-          'ftp::/usr/bin/curl -gqfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
-          'http::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
-          'https::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
-          'rsync::/usr/bin/rsync --no-motd -zz %u %o'
+DLAGENTS=('file::/usr/bin/curl -qgC - -o %o %u'
+          'ftp::/usr/bin/curl -qgfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
+          'http::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'https::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'rsync::/usr/bin/rsync --no-motd -z %u %o'
           'scp::/usr/bin/scp -C %u %o')
 
 # Other common tools:
@@ -26,6 +26,7 @@ DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
 #-- The package required by makepkg to download VCS sources
 #  Format: 'protocol::package'
 VCSCLIENTS=('bzr::bzr'
+            'fossil::fossil'
             'git::git'
             'hg::mercurial'
             'svn::subversion')
@@ -38,21 +39,26 @@ CARCH="x86_64"
 CHOST="x86_64-pc-linux-gnu"
 
 #-- Compiler and Linker Flags
-CPPFLAGS="-D_FORTIFY_SOURCE=2"
-CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt"
-CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt"
+#CPPFLAGS=""
+CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions \
+        -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security \
+        -fstack-clash-protection -fcf-protection"
+CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
 LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
+LTOFLAGS="-flto=auto"
+RUSTFLAGS=""
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 #-- Debugging flags
-DEBUG_CFLAGS="-g -fvar-tracking-assignments"
-DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
+DEBUG_CFLAGS="-g"
+DEBUG_CXXFLAGS="$DEBUG_CFLAGS"
+DEBUG_RUSTFLAGS="-C debuginfo=2"
 
 #########################################################################
 # BUILD ENVIRONMENT
 #########################################################################
 #
-# Defaults: BUILDENV=(!distcc !color !ccache check !sign)
+# Makepkg defaults: BUILDENV=(!distcc !color !ccache check !sign)
 #  A negated environment option will do the opposite of the comments below.
 #
 #-- distcc:   Use the Distributed C/C++/ObjC compiler
@@ -75,7 +81,7 @@ BUILDENV=(!distcc color !ccache check !sign)
 #   These are default values for the options=() settings
 #########################################################################
 #
-# Default: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug)
+# Makepkg defaults: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug !lto)
 #  A negated option will do the opposite of the comments below.
 #
 #-- strip:      Strip symbols from binaries/libraries
@@ -86,11 +92,12 @@ BUILDENV=(!distcc color !ccache check !sign)
 #-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
 #-- purge:      Remove files specified by PURGE_TARGETS
 #-- debug:      Add debugging flags as specified in DEBUG_* variables
+#-- lto:        Add compile flags for building with link time optimization
 #
-OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug)
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug lto)
 
-#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
-INTEGRITY_CHECK=(md5)
+#-- File integrity checks to use. Valid: md5, sha1, sha224, sha256, sha384, sha512, b2
+INTEGRITY_CHECK=(sha256)
 #-- Options to be used when stripping binaries. See `man strip' for details.
 STRIP_BINARIES="--strip-all"
 #-- Options to be used when stripping shared libraries. See `man strip' for details.
@@ -146,4 +153,10 @@ COMPRESSLZ=(lzip -c -f)
 PKGEXT='.pkg.tar.zst'
 SRCEXT='.src.tar.gz'
 
+#########################################################################
+# OTHER
+#########################################################################
+#
+#-- Command used to run pacman as root, instead of trying sudo and su
+#PACMAN_AUTH=()
 # vim: set ft=sh ts=2 sw=2 et:

data/pacman/pacman-default.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -83,15 +85,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-docker.conf

@@ -1,111 +0,0 @@
-#
-# /etc/pacman.conf
-#
-# See the pacman.conf(5) manpage for option and repository directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-# The following paths are commented out with their default values listed.
-# If you wish to use different paths, uncomment and update the paths.
-#RootDir     = /
-#DBPath      = /var/lib/pacman/
-#CacheDir    = /var/cache/pacman/pkg/
-#LogFile     = /var/log/pacman.log
-#GPGDir      = /etc/pacman.d/gnupg/
-#HookDir     = /etc/pacman.d/hooks/
-HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-#CleanMethod = KeepInstalled
-Architecture = auto
-
-# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
-#IgnorePkg   =
-#IgnoreGroup =
-
-#NoUpgrade   =
-NoExtract  = usr/share/help/* !usr/share/help/en*
-NoExtract  = usr/share/gtk-doc/html/* usr/share/doc/*
-NoExtract  = usr/share/locale/* usr/share/X11/locale/* usr/share/i18n/*
-NoExtract   = !*locale*/en*/* !usr/share/i18n/charmaps/UTF-8.gz !usr/share/*locale*/locale.*
-NoExtract   = !usr/share/*locales/en_?? !usr/share/*locales/i18n* !usr/share/*locales/iso*
-NoExtract   = !usr/share/*locales/trans*
-NoExtract  = usr/share/man/* usr/share/info/*
-NoExtract  = usr/share/vim/vim*/lang/*
-
-# Misc options
-#UseSyslog
-#Color
-#TotalDownload
-CheckSpace
-VerbosePkgLists
-
-
-# By default, pacman accepts packages signed by keys that its local keyring
-# trusts (see pacman-key and its man page), as well as unsigned packages.
-SigLevel    = Required DatabaseOptional
-LocalFileSigLevel = Optional
-#RemoteFileSigLevel = Required
-
-# NOTE: You must run `pacman-key --init` before first using pacman; the local
-# keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
-
-#
-# REPOSITORIES
-#   - can be defined here or included from another file
-#   - pacman will search repositories in the order defined here
-#   - local/custom mirrors can be added here or in separate files
-#   - repositories listed first will take precedence when packages
-#     have identical names, regardless of version number
-#   - URLs will have $repo replaced by the name of the current repo
-#   - URLs will have $arch replaced by the name of the architecture
-#
-# Repository entries are of the format:
-#       [repo-name]
-#       Server = ServerName
-#       Include = IncludePath
-#
-# The header [repo-name] is crucial - it must be present and
-# uncommented to enable the repo.
-#
-
-# The gremlins repositories are disabled by default. To enable, uncomment the
-# repo name header and Include lines. You can add preferred servers immediately
-# after the header, and they will be used before the default mirrors.
-
-[system]
-Include = /etc/pacman.d/mirrorlist
-
-[world]
-Include = /etc/pacman.d/mirrorlist
-
-[galaxy]
-Include = /etc/pacman.d/mirrorlist
-
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
-# An example of a custom package repository.  See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-#[extra]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[community]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

data/pacman/pacman-gnome-wobble.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -92,18 +94,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-goblins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -89,18 +91,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-gremlins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -83,15 +85,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-kde-wobble.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -92,18 +94,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-lib32-goblins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES

data/pacman/pacman-lib32-gremlins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES

data/pacman/pacman-lib32.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES

initcpio/Makefile

@@ -1,23 +0,0 @@
-DIRMODE = -dm0755
-MODE =  -m0755
-
-CPIOHOOKS = \
-	$(wildcard hooks/*)
-
-CPIOINST = \
-	$(wildcard install/*)
-
-SCRIPT = \
-	$(wildcard script/*)
-
-install_initcpio:
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/hooks
-	install $(MODE) $(CPIOHOOKS) $(DESTDIR)$(CPIODIR)/hooks
-
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(CPIOINST) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(SCRIPT) $(DESTDIR)$(CPIODIR)
-
-install: install_initcpio
-
-.PHONY: install

initcpio/hooks/artix

@@ -1,275 +0,0 @@
-# args: source, newroot, mountpoint
-_mnt_dmsnapshot() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}";
-    local img_name="${img_fullname%%.*}"
-    local dm_snap_name="${dm_snap_prefix}_${img_name}"
-    local ro_dev ro_dev_size rw_dev
-
-    ro_dev=$(losetup --find --show --read-only "${img}")
-    echo ${ro_dev} >> ${live_root}/used_block_devices
-    ro_dev_size=$(blockdev --getsz ${ro_dev})
-
-    if [[ "${cow_persistent}" == "P" ]]; then
-        if [[ -f "${cow}/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '${cow}/${cow_directory}/${img_name}.cow', using as persistent."
-        else
-            msg ":: Creating '${cow}/${cow_directory}/${img_name}.cow' as persistent."
-            truncate -s "${cow_spacesize}" "${cow}/${cow_directory}/${img_name}.cow"
-        fi
-    else
-        if [[ -f "${cow}/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '${cow}/${cow_directory}/${img_name}.cow' but non-persistent requested, removing."
-            rm -f "${cow}/${cow_directory}/${img_name}.cow"
-        fi
-        msg ":: Creating '${cow}/${cow_directory}/${img_name}.cow' as non-persistent."
-        truncate -s "${cow_spacesize}" "${cow}/${cow_directory}/${img_name}.cow"
-    fi
-
-    rw_dev=$(losetup --find --show "${cow}/${cow_directory}/${img_name}.cow")
-    echo ${rw_dev} >> ${live_root}/used_block_devices
-
-    dmsetup create ${dm_snap_name} --table "0 ${ro_dev_size} snapshot ${ro_dev} ${rw_dev} ${cow_persistent} ${cow_chunksize}"
-
-    if [[ "${cow_persistent}" != "P" ]]; then
-        rm -f "${cow}/${cow_directory}/${img_name}.cow"
-    fi
-
-    _mnt_dev "/dev/mapper/${dm_snap_name}" "${mnt}" "-w" "defaults"
-    echo $(readlink -f /dev/mapper/${dm_snap_name}) >> ${live_root}/used_block_devices
-}
-
-# args: source, newroot, mountpoint
-_mnt_overlayfs() {
-    local src="${1}"
-    local newroot="${2}"
-    local mnt="${3}"
-    local work_dir="${overlay_root}/work"
-    local upper_dir="${overlay_root}/upper"
-
-    mkdir -p "${upper_dir}" "${work_dir}"
-
-    mount -t overlay overlay -o lowerdir="${src}",upperdir="${upper_dir}",workdir="${work_dir}" "${newroot}${mnt}"
-}
-
-# args: /path/to/image_file, mountpoint
-_mnt_sfs() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}"
-    local sfs_dev
-    local oper=$( [[ -n "${ip}" && -n "${miso_http_srv}" ]] && echo "mv" || echo "cp" )
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg -n ":: Copying squashfs image to RAM..."
-        if ! "${oper}" "${img}" "${cp2ram}/${img_fullname}" ; then
-            echo "ERROR: while copy '${img}' to '${cp2ram}/${img_fullname}'"
-            launch_interactive_shell
-        fi
-        img="${cp2ram}/${img_fullname}"
-        msg "done."
-    fi
-    sfs_dev=$(losetup --find --show --read-only "${img}")
-    echo ${sfs_dev} >> ${live_root}/used_block_devices
-    _mnt_dev "${sfs_dev}" "${mnt}" "-r" "defaults"
-}
-
-# args: device, mountpoint, flags, opts
-_mnt_dev() {
-    local dev="${1}"
-    local mnt="${2}"
-    local flg="${3}"
-    local opts="${4}"
-
-    mkdir -p "${mnt}"
-
-    msg ":: Mounting '${dev}' to '${mnt}'"
-
-    while ! poll_device "${dev}" 30; do
-        echo "ERROR: '${dev}' device did not show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    if mount -o "${opts}" "${flg}" "${dev}" "${mnt}"; then
-        msg ":: Device '${dev}' mounted successfully."
-    else
-        echo "ERROR; Failed to mount '${dev}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-_verify_checksum() {
-    local _status
-    cd "${bootmnt}/${root}"
-    sha512sum -c $1.img.sha512 > /tmp/checksum.log 2>&1
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-_verify_signature() {
-    local _status
-    cd "${bootmnt}/${root}"
-    gpg --homedir /gpg --status-fd 1 --verify $1.img.sig 2>/dev/null | grep -qE '^\[GNUPG:\] GOODSIG'
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-run_hook() {
-    [[ -z "${copytoram_size}" ]] && copytoram_size="75%"
-    [[ -z "${root}" ]] && root="LiveOS"
-
-    [[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="artix"
-    [[ -z "${artixdevice}" ]] && artixdevice="/dev/disk/by-label/${label}"
-    [[ -z "${cow_spacesize}" ]] && cow_spacesize="256M"
-    [[ -z "${overlay_root_size}" ]] && overlay_root_size="75%"
-
-    if [[ -n "${cow_label}" ]]; then
-        cow_device="/dev/disk/by-label/${cow_label}"
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    elif [[ -n "${cow_device}" ]]; then
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    else
-        cow_persistent="N"
-    fi
-
-    [[ -z "${cow_flags}" ]] && cow_flags="defaults"
-    [[ -z "${cow_directory}" ]] && cow_directory="persistent_${label}"
-    [[ -z "${cow_chunksize}" ]] && cow_chunksize="8"
-    [[ -z "${overlay}" ]] && overlay=""
-
-    lower_dir=''
-    live_root="/run/artix"
-    bootmnt="${live_root}/bootmnt"
-    overlay_root="${live_root}/overlay_root"
-    cow="${live_root}/cowspace"
-    cp2ram="${live_root}/copytoram"
-
-    # set mount handler for artix
-    mount_handler="artix_mount_handler"
-}
-
-_check_sum() {
-    local fs="${1}"
-    if [[ -f "${bootmnt}/${root}/${fs}.img" ]]; then
-        if [[ -f "${bootmnt}/${root}/${fs}.img.md5" ]]; then
-            msg -n ":: Self-test requested, please wait..."
-            if _verify_checksum "${fs}"; then
-                msg "done. Checksum is OK, continue booting."
-            else
-                echo "ERROR: one or more files are corrupted"
-                echo "see /tmp/checksum.log for details"
-                launch_interactive_shell
-            fi
-        else
-            echo "ERROR: checksum=y option specified but ${root}/${fs}.img.md5 not found"
-            launch_interactive_shell
-        fi
-    fi
-}
-
-_check_sig() {
-    local fs="${1}"
-    if [[ -f "${bootmnt}/${root}/${fs}.img" ]]; then
-        if [[ -f "${bootmnt}/${root}/${fs}.img.sig" ]]; then
-            msg -n ":: Signature verification requested, please wait..."
-            if _verify_signature "${fs}"; then
-                msg "done. Signature is OK, continue booting."
-            else
-                echo "ERROR: one or more files are corrupted"
-                launch_interactive_shell
-            fi
-        else
-            echo "ERROR: verify=y option specified but ${root}/${fs}.img.sig not found"
-            launch_interactive_shell
-        fi
-    fi
-}
-
-_gen_arg() {
-    local arg="${1}"
-    echo "${lower_dir:-}${lower_dir:+:}${arg}"
-}
-
-_mount_root_overlayfs() {
-    local sfs="${1}"
-    local src="${bootmnt}/${root}"
-    local dest_sfs="${live_root}/sfs"
-    local dest_img="${live_root}/img"
-
-    if [[ -f "${src}/${sfs}.img" ]]; then
-        _mnt_sfs "${src}/${sfs}.img" "${dest_sfs}/${sfs}"
-        local find_img="${dest_sfs}/${sfs}/LiveOS/${sfs}.img"
-        if [[ -f "${find_img}" ]]; then
-            mkdir -p ${dest_img}
-            lower_dir=$(_gen_arg "${dest_img}/${sfs}")
-            _mnt_dmsnapshot "${find_img}" "${dest_img}/${sfs}"
-        else
-            lower_dir=$(_gen_arg "${dest_sfs}/${sfs}")
-        fi
-    fi
-}
-
-# This function is called normally from init script, but it can be called
-# as chain from other mount handlers.
-# args: /path/to/newroot
-artix_mount_handler() {
-    local newroot="${1}"
-
-    if ! mountpoint -q "${bootmnt}"; then
-        _mnt_dev "${artixdevice}" "${bootmnt}" "-r" "defaults"
-        if [[ "${copytoram}" != "y" ]]; then
-            echo $(readlink -f ${artixdevice}) >> ${live_root}/used_block_devices
-        fi
-    fi
-
-    if [[ "${checksum}" == "y" ]]; then
-        _check_sum "rootfs"
-        [[ -n "${overlay}" ]] && _check_sum "${overlay}"
-    fi
-
-    if [[ "${verify}" == "y" ]]; then
-        _check_sig "rootfs"
-        [[ -n "${overlay}" ]] && _check_sig "${overlay}"
-    fi
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Mounting ${cp2ram} (tmpfs) filesystem, size=${copytoram_size}"
-        mkdir -p ${cp2ram}
-        mount -t tmpfs -o "size=${copytoram_size}",mode=0755 copytoram ${cp2ram}
-    fi
-
-    if [[ -n "${cow_device}" ]]; then
-        _mnt_dev "${cow_device}" "${cow}" "-r" "${cow_flags}"
-        echo $(readlink -f ${cow_device}) >> ${live_root}/used_block_devices
-        mount -o remount,rw "${cow}"
-    else
-        msg ":: Mounting ${cow} (tmpfs) filesystem, size=${cow_spacesize}..."
-        mkdir -p ${cow}
-        mount -t tmpfs -o "size=${cow_spacesize}",mode=0755 cowspace ${cow}
-    fi
-    mkdir -p -m 0700 "${cow}/${cow_directory}"
-
-    msg -n ":: Mounting overlay root (tmpfs) filesystem, size=${overlay_root_size}..."
-    mkdir -p ${overlay_root}
-    mount -t tmpfs -o "size=${overlay_root_size}",mode=0755 overlay_root ${overlay_root}
-
-    [[ -n "${overlay}" ]] && _mount_root_overlayfs "${overlay}"
-    _mount_root_overlayfs "rootfs"
-
-    _mnt_overlayfs "${lower_dir}" "${newroot}" "/"
-
-    if [[ "${copytoram}" == "y" ]]; then
-        umount -d ${bootmnt}
-        mkdir -p ${bootmnt}/${root}
-        mount -o bind ${cp2ram} ${bootmnt}/${root}
-    fi
-}
-
-# vim:ft=sh:ts=4:sw=4:et:

initcpio/hooks/artix_loop_mnt

@@ -1,35 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    [[ -n "${img_label}" ]] && img_dev="/dev/disk/by-label/${img_label}"
-    [[ -z "${img_flags}" ]] && img_flags="defaults"
-    if [[ -n "${img_dev}" && -n "${img_loop}" ]]; then
-        mount_handler="artix_loop_mount_handler"
-    fi
-}
-
-artix_loop_mount_handler () {
-    newroot="${1}"
-
-    local _dev_loop
-
-    msg ":: Setup a loop device from ${img_loop} located at device ${img_dev}"
-    _mnt_dev "${img_dev}" "${live_root}/img_dev" "-r" "${img_flags}"
-    if [[ "${copytoram}" != "y" ]]; then
-        echo $(readlink -f ${img_dev}) >> ${live_root}/used_block_devices
-    fi
-
-    if _dev_loop=$(losetup --find --show --read-only "${live_root}/img_dev/${img_loop}"); then
-        artixdevice="${_dev_loop}"
-    else
-        echo "ERROR: Setting loopback device for file '${live_root}/img_dev/${img_loop}'"
-        launch_interactive_shell
-    fi
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        losetup -d ${_dev_loop} 2>/dev/null
-        umount ${live_root}/img_dev
-    fi
-}

initcpio/hooks/artix_pxe_common

@@ -1,72 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    # Do *not* declare 'bootif_dev' local! We need it in run_latehook().
-    local i net_mac bootif_mac
-    # These variables will be parsed from /tmp/net-*.conf generated by ipconfig
-    local DEVICE
-    local IPV4ADDR IPV4BROADCAST IPV4NETMASK IPV4GATEWAY IPV4DNS0 IPV4DNS1
-    local HOSTNAME DNSDOMAIN NISDOMAIN ROOTSERVER ROOTPATH
-    local filename
-    # /tmp/net-*.conf
-
-    if [[ -n "${ip}" ]]; then
-        if [[ -n "${BOOTIF}" ]]; then
-            bootif_mac=${BOOTIF#01-}
-            bootif_mac=${bootif_mac//-/:}
-            for i in /sys/class/net/*/address; do
-                read net_mac < ${i}
-                if [[ "${bootif_mac}" == "${net_mac}" ]]; then
-                    bootif_dev=${i#/sys/class/net/}
-                    bootif_dev=${bootif_dev%/address}
-                    break
-                fi
-            done
-            if [[ "${ip}" == "dhcp" ]]; then
-               ip=":::::${bootif_dev}:dhcp"
-            else
-               ip="${ip}::${bootif_dev}"
-           fi
-        fi
-
-        # setup network and save some values
-        if ! ipconfig -t 20 "ip=${ip}"; then
-                echo "ERROR; Failed to configure network"
-                echo "   Falling back to interactive prompt"
-                echo "   You can try to fix the problem manually, log out when you are finished"
-                launch_interactive_shell
-        fi
-
-        . /tmp/net-*.conf
-
-        pxeserver=${ROOTSERVER}
-
-        # setup DNS resolver
-        if [[ "${IPV4DNS0}" != "0.0.0.0" ]]; then
-            echo "# added by artix_pxe_common hook" > /etc/resolv.conf
-            echo "nameserver ${IPV4DNS0}" >> /etc/resolv.conf
-        fi
-        if [[ "${IPV4DNS1}" != "0.0.0.0" ]]; then
-            echo "nameserver ${IPV4DNS1}" >> /etc/resolv.conf
-        fi
-        if [[ -n "${DNSDOMAIN}" ]]; then
-            echo "search ${DNSDOMAIN}" >> /etc/resolv.conf
-            echo "domain ${DNSDOMAIN}" >> /etc/resolv.conf
-        fi
-    fi
-}
-
-run_latehook () {
-    if [[ -n "${ip}" ]]; then
-        [[ -z "${copy_resolvconf}" ]] && copy_resolvconf="y"
-
-        if [[ "${copytoram}" == "y" ]]; then
-            if [[ -n "${bootif_dev}" ]]; then
-                ip addr flush dev "${bootif_dev}"
-                ip link set "${bootif_dev}" down
-            fi
-        elif [[ "${copy_resolvconf}" != "n" && -f /etc/resolv.conf ]]; then
-            cp /etc/resolv.conf /new_root/etc/resolv.conf
-        fi
-    fi
-}

initcpio/hooks/artix_pxe_http

@@ -1,63 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_http_srv}" ]]; then
-
-        # booting with http is always copy-to-ram, so set here to make sure
-        # addresses are flushed and interface is set down
-        copytoram="y"
-
-        artix_http_srv=$(eval echo ${artix_http_srv})
-        [[ -z "${artix_http_spc}" ]] && artix_http_spc="75%"
-
-        mount_handler="artix_pxe_http_mount_handler"
-    fi
-}
-
-# Fetch a file with CURL
-#
-# $1 URL
-# $2 Destination directory inside httpspace/${root}
-_curl_get() {
-    local _url="${1}"
-    local _dst="${2}"
-
-    msg ":: Downloading '${_url}'"
-    if ! curl -L -f -o "${live_root}/httpspace/${root}${_dst}/${_url##*/}" --create-dirs "${_url}"; then
-        echo "ERROR: Downloading '${_url}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-_get_sfs() {
-    local _sfs="${2}"
-    local _src=${artix_http_srv}${root}
-    if [[ ! -z "$( curl -s --head "${_src}/${_sfs}.img" | grep "OK" )" ]]; then
-        _curl_get "${_src}/${_sfs}.img" "/"
-
-        if [[ "${checksum}" == "y" ]]; then
-            _curl_get "${_src}/${_sfs}.md5" "/"
-        fi
-        if [[ "${verify}" == "y" ]]; then
-            _curl_get "${_src}/${_sfs}.img.sig" "/"
-        fi
-    fi
-}
-
-artix_pxe_http_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Mounting ${live_root}/httpspace (tmpfs) filesystem, size='${artix_http_spc}'"
-    mkdir -p "${live_root}/httpspace"
-    mount -t tmpfs -o size="${artix_http_spc}",mode=0755 httpspace "${live_root}/httpspace"
-
-    _get_sfs "rootfs"
-    [[ -n "${overlay}" ]] && _mount_root_overlayfs "${overlay}"
-
-    mkdir -p "${bootmnt}"
-    mount -o bind ${live_root}/httpspace ${bootmnt}
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_pxe_nbd

@@ -1,47 +0,0 @@
-# vim: set ft=sh:
-
-run_earlyhook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-        # Module autoloading like with loop devices does not work, doing manually...
-        modprobe nbd 2> /dev/null
-    fi
-}
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-
-        artix_nbd_srv=$(eval echo ${artix_nbd_srv})
-        [[ -z "${artix_nbd_name}" ]] && artix_nbd_name="artix"
-
-        mount_handler="artix_pxe_nbd_mount_handler"
-    fi
-}
-
-artix_pxe_nbd_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Waiting for boot device..."
-    while ! poll_device /dev/nbd0 30; do
-        echo "ERROR: boot device didn't show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    msg ":: Setup NBD from ${artix_nbd_srv} at /dev/nbd0"
-    if [[ "${copytoram}" != "n" ]]; then
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} /dev/nbd0
-        copytoram="y"
-    else
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} -persist /dev/nbd0
-    fi
-
-    artixdevice=/dev/nbd0
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Disconnect NBD from ${artix_nbd_srv} at /dev/nbd0"
-        nbd-client -d /dev/nbd0
-    fi
-}

initcpio/hooks/artix_pxe_nfs

@@ -1,30 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nfs_srv}" ]]; then
-
-        artix_nfs_srv=$(eval echo ${artix_nfs_srv})
-        [[ -n "${artix_nfs_opt}" ]] && artix_nfs_opt="-o ${artix_nfs_opt}"
-
-        mount_handler="artix_nfs_mount_handler"
-    fi
-}
-
-artix_nfs_mount_handler() {
-    newroot="${1}"
-    mkdir -p "${bootmnt}"
-    msg ":: Mounting '${artix_nfs_srv}'"
-    # Do not put "${artix_nfs_opt}" nfsmount fails!
-    if ! nfsmount ${artix_nfs_opt} "${artix_nfs_srv}" "${bootmnt}"; then
-        echo "ERROR: Mounting '${artix_nfs_srv}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-
-    if [[ "${copytoram}" != "n" ]]; then
-        copytoram="y"
-    fi
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_shutdown

@@ -1,6 +0,0 @@
-run_cleanuphook() {
-    rm -rf /usr/lib/modules
-    cp -ax / /run/initramfs
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "cdrom"
-    add_module "loop"
-    add_module "dm-snapshot"
-    add_module "overlay"
-
-    add_runscript
-
-    add_binary /usr/lib/udev/cdrom_id
-    add_binary blockdev
-    add_binary dmsetup
-    add_binary losetup
-    add_binary mountpoint
-    add_binary truncate
-    add_binary gpg
-    add_binary grep
-
-    add_file /usr/lib/udev/rules.d/60-cdrom_id.rules
-    add_file /usr/lib/udev/rules.d/10-dm.rules
-    add_file /usr/lib/udev/rules.d/95-dm-notify.rules
-    add_file /usr/lib/initcpio/udev/11-dm-initramfs.rules /usr/lib/udev/rules.d/11-dm-initramfs.rules
-    if [[ $ARTIX_GNUPG_FD ]]; then
-        mkdir -p "$BUILDROOT$dest"/gpg
-        gpg --homedir "$BUILDROOT$dest"/gpg --import <&$ARTIX_GNUPG_FD
-    fi
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_kms

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "radeon"
-    add_module "nouveau"
-    add_module "i915"
-    add_module "via-agp"
-    add_module "sis-agp"
-    add_module "intel-agp"
-}
-
-help() {
-    cat << HELPEOF
-Adds all common KMS drivers to the initramfs image.
-HELPEOF
-}

initcpio/install/artix_loop_mnt

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via loop device.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_common

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_checked_modules -f "(irda|phy|wimax|wireless|ppp_|plip|pppoe)" "/drivers/net/"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/ipconfig /bin/ipconfig
-
-    # Add hosts support files+dns
-    add_symlink /usr/lib/libnss_files.so.2 $(readlink /usr/lib/libnss_files.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_files.so.2)
-    add_symlink /usr/lib/libnss_dns.so.2 $(readlink /usr/lib/libnss_dns.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_dns.so.2)
-
-    add_dir /etc
-    echo "hosts: files dns" > $BUILDROOT/etc/nsswitch.conf
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_http

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-
-    add_binary curl
-
-    add_file $(readlink -f /etc/ssl/certs/ca-certificates.crt) /etc/ssl/certs/ca-certificates.crt
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and HTTP.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nbd

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nbd"
-
-    add_runscript
-
-    add_binary nbd-client
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NBD.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nfs

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nfs"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/nfsmount /bin/nfsmount
-}
-
-help() {
-    cat <<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NFS.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_shutdown

@@ -1,20 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_binary cp
-
-    add_runscript
-
-    add_file /etc/initcpio/artix_shutdown /shutdown
-}
-
-help() {
-    cat <<HELPEOF
-This hook will create a shutdown initramfs in /run/initramfs
-that we can pivot to on shutdown in order to unmount / and
-and others mount points, dm-snapshot devices and loopback devices.
-Mostly usefull for dm-snapshot persistent.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/script/artix_shutdown

@@ -1,37 +0,0 @@
-#!/bin/ash
-
-# /oldroot depends on things inside /oldroot/run/artix...
-mkdir /oldrun
-mount -n --move /oldroot/run /oldrun
-
-# Unmount all mounts now.
-umount $(mount | awk '$3 ~/^\/oldroot/ {print $3}' | sort -r)
-
-# Remove all dm-snapshot devices.
-dmsetup remove_all
-
-# Remove all loopback devices.
-for _lup in $(grep ^/dev/loop /oldrun/artix/used_block_devices | tac); do
-    if ! losetup -d ${_lup} 2> /dev/null; then
-        umount -d ${_lup}
-    fi
-done
-
-# Unmount the space used to store *.cow.
-umount /oldrun/artix/cowspace
-
-# Unmount boot device if needed (no copytoram=y used)
-if [[ ! -d /oldrun/artix/copytoram ]]; then
-    if [[ -d /oldrun/artix/img_dev ]]; then
-        umount /oldrun/artix/img_dev
-    else
-        umount /oldrun/bootmnt
-    fi
-fi
-
-# reboot / poweroff / halt, depending on the argument passed by init
-# if something invalid is passed, we halt
-case "$1" in
-  reboot|poweroff|halt) "$1" -f ;;
-  *) halt -f;;
-esac

lib/base/message.sh

@@ -9,8 +9,6 @@
 
 export LANG=C
 
-shopt -s extglob
-
 if [[ -t 2 && "$TERM" != dumb ]]; then
     colorize
 else

lib/base/yaml.sh

@@ -3,11 +3,11 @@
 #{{{ yaml
 
 write_yaml_header(){
-    printf '%s' '---'
+    printf '%s\n' '---'
 }
 
 write_empty_line(){
-    printf '\n%s\n' ' '
+    printf '\n'
 }
 
 write_yaml_map(){

lib/iso/calamares.sh

@@ -13,7 +13,7 @@ write_services_conf(){
         yaml+=$(write_yaml_seq 2 "$svc")
     done
     yaml+=$(write_empty_line)
-    printf '%s' "${yaml}"
+    printf '%s\n' "${yaml}"
 }
 
 write_services_openrc_conf(){
@@ -29,33 +29,17 @@ write_services_runit_conf(){
 write_services_s6_conf(){
     local conf="$1"/services-s6.conf
     write_services_conf 'svDir' '/etc/s6/sv' 'dbDir' '/etc/s6/rc/compiled' > "$conf"
+    printf '%s\n' "defaultBundle: default" >> "$conf"
 }
 
-write_postcfg(){
-    local yaml
-    yaml=$(write_yaml_header)
-    yaml+=$(write_yaml_map 0 'keyrings')
-    for k in archlinux artix;do
-        yaml+=$(write_yaml_seq 2 "$k")
-    done
-    yaml+=$(write_empty_line)
-    printf '%s' "${yaml}"
+write_services_suite66_conf(){
+    local conf="$1"/services-suite66.conf
+    write_services_conf 'svDir' '/etc/66/service' 'runsvDir' '/var/lib/66/system' > "$conf"
 }
 
-write_unpackfs() {
-    local yaml
-    yaml=$(write_yaml_header)
-    yaml+=$(write_yaml_map 0 'unpack')
-#     if ${persist}; then
-#         yaml+=$(write_yaml_seq_map 2 'source' '"/run/artix/bootmnt/LiveOS/rootfs.img"')
-#         yaml+=$(write_yaml_map 4 'sourcefs' '"ext4"')
-#     else
-    yaml+=$(write_yaml_seq_map 2 'source' '"/run/artix/bootmnt/LiveOS/rootfs.img"')
-    yaml+=$(write_yaml_map 4 'sourcefs' '"squashfs"')
-#     fi
-    yaml+=$(write_yaml_map 4 'destination' '""')
-    yaml+=$(write_empty_line)
-    printf '%s' "${yaml}"
+write_services_dinit_conf(){
+    local conf="$1"/services-dinit.conf
+    write_services_conf 'initdDir' '/etc/dinit.d' 'runsvDir' '/etc/dinit.d/boot.d' > "$conf"
 }
 
 configure_calamares(){
@@ -63,8 +47,6 @@ configure_calamares(){
     if [[ -d "$mods" ]];then
         msg2 "Configuring: Calamares"
         write_services_"${INITSYS}"_conf "$mods"
-        write_postcfg > "$mods"/postcfg.conf
-        write_unpackfs > "$mods"/unpackfs.conf
         sed -e "s|services-openrc|services-${INITSYS}|" \
             -i "$1"/etc/calamares/settings.conf
     fi

lib/iso/dracut.sh

@@ -10,7 +10,7 @@ prepare_initramfs_dracut(){
     printf "%s\n" 'add_dracutmodules+=" dmsquash-live"' > "$mnt"/etc/dracut.conf.d/50-live.conf
 
     msg "Starting build: %s" "${kver}"
-    artools-chroot "$mnt" dracut -fqM /boot/initramfs.img "$kver"
+    artix-chroot "$mnt" dracut -fqM /boot/initramfs.img "$kver"
     msg "Image generation successful"
 
     cp "$mnt"/boot/initramfs.img "${iso_root}"/boot/initramfs-"${arch}".img

lib/iso/grub.sh

@@ -2,20 +2,6 @@
 
 #{{{ grub
 
-configure_grub(){
-    msg "Configuring grub kernel options ..."
-    local ro_opts=()
-    local rw_opts=()
-    local kopts=("label=${iso_label}")
-
-    [[ "${profile}" != 'base' ]] && kopts+=('overlay=livefs')
-
-    sed -e "s|@kopts@|${kopts[*]}|" \
-        -e "s|@ro_opts@|${ro_opts[*]}|" \
-        -e "s|@rw_opts@|${rw_opts[*]}|" \
-        -i "${iso_root}"/boot/grub/kernels.cfg
-}
-
 prepare_grub(){
     local platform=i386-pc img='core.img' prefix=/boot/grub
     local lib="$1"/usr/lib/grub
@@ -23,7 +9,6 @@ prepare_grub(){
     local livecfg="$2"/usr/share/grub
     local grub=${iso_root}/boot/grub efi=${iso_root}/efi/boot
 
-
     prepare_dir "${grub}/${platform}"
 
     cp "${livecfg}"/cfg/*.cfg "${grub}"

lib/iso/initcpio.sh

@@ -2,56 +2,71 @@
 
 #{{{ initcpio
 
-write_mkinitcpio_conf() {
-    msg2 "Writing mkinitcpio.conf ..."
-    local conf="$1/etc/mkinitcpio-artix.conf"
-    printf "%s\n" 'MODULES=(loop dm-snapshot)' > "$conf"
-    printf "%s\n" 'COMPRESSION="xz"' >> "$conf"
-    if [[ "${profile}" == 'base' ]];then
-        printf "%s\n" 'HOOKS=(base udev artix_shutdown artix artix_loop_mnt
-                            artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs
-                            artix_kms modconf block filesystems keyboard keymap)' >> "$conf"
-    else
-        printf "%s\n" 'HOOKS=(base udev artix_shutdown artix artix_loop_mnt
-                            artix_kms modconf block filesystems keyboard keymap)' >> "$conf"
+make_checksum(){
+    local file="$1"
+    msg2 "Creating md5sum ..."
+    cd "${iso_root}${live_dir}"
+    md5sum "$file" > "$file".md5
+    cd "${OLDPWD}"
+}
+
+make_sig () {
+    local file="$1"
+    msg2 "Creating signature file..."
+    chown "${owner}:$(id --group "${owner}")" "${iso_root}${live_dir}"
+    su "${owner}" -c "gpg --detach-sign --output $file.sig --default-key ${GPG_KEY} $file"
+    chown "root:root" "${iso_root}${live_dir}"
+}
+
+export_gpg_publickey() {
+    key_export=${WORKSPACE_DIR}/pubkey.gpg
+    if [[ ! -e "${key_export}" ]]; then
+        gpg --batch --output "${key_export}" --export "${GPG_KEY}"
     fi
 }
 
-prepare_initcpio(){
-    msg2 "Copying initcpio ..."
-    local dest="$1"
-    cp /etc/initcpio/hooks/artix* "$dest"/etc/initcpio/hooks
-    cp /etc/initcpio/install/artix* "$dest"/etc/initcpio/install
-    cp /etc/initcpio/artix_shutdown "$dest"/etc/initcpio
-}
+prepare_initramfs_mkinitcpio() {
+    local mnt="$1" packages=() mkinitcpio_conf k
 
-prepare_initramfs(){
-    local mnt="$1"
+    mkinitcpio_conf=mkinitcpio-default.conf
+    [[ "${profile}" == 'base' ]] && mkinitcpio_conf=mkinitcpio-pxe.conf
+    k=$(<"$mnt"/usr/src/linux/version)
 
-    prepare_initcpio "$mnt"
+    read_from_list "${common_dir}/Packages-boot"
+    basestrap "${basestrap_args[@]}" "$mnt" "${packages[@]}"
 
-    write_mkinitcpio_conf "$mnt"
-
-    if [[ -n ${GPG_KEY} ]]; then
-        su "${owner}" -c "gpg --export ${GPG_KEY} >/tmp/GPG_KEY"
-        exec 17<>/tmp/GPG_KEY
+    if [[ -n "${GPG_KEY}" ]]; then
+        exec {ARTIX_GNUPG_FD}<>"${key_export}"
+        export ARTIX_GNUPG_FD
     fi
-    local _kernel
-     _kernel=$(<"$mnt"/usr/src/linux/version)
-    ARTIX_GNUPG_FD=${GPG_KEY:+17} artools-chroot "$mnt" \
-        /usr/bin/mkinitcpio -k "${_kernel}" \
-        -c /etc/mkinitcpio-artix.conf \
+
+    artix-chroot "$mnt" mkinitcpio -k "$k" \
+        -c /etc/"$mkinitcpio_conf" \
         -g /boot/initramfs.img
 
     if [[ -n "${GPG_KEY}" ]]; then
-        exec 17<&-
+        exec {ARTIX_GNUPG_FD}<&-
+        unset ARTIX_GNUPG_FD
     fi
-    if [[ -f /tmp/GPG_KEY ]]; then
-        rm /tmp/GPG_KEY
+    if [[ -f "${key_export}" ]]; then
+        rm "${key_export}"
     fi
-
     cp "$mnt"/boot/initramfs.img "${iso_root}"/boot/initramfs-"${arch}".img
     prepare_boot_extras "$mnt"
 }
 
+configure_grub_mkinitcpio() {
+    msg "Configuring grub kernel options ..."
+    local ro_opts=()
+    local rw_opts=()
+    local kopts=("label=${iso_label}")
+
+    [[ "${profile}" != 'base' ]] && kopts+=('overlay=livefs')
+
+    sed -e "s|@kopts@|${kopts[*]}|" \
+        -e "s|@ro_opts@|${ro_opts[*]}|" \
+        -e "s|@rw_opts@|${rw_opts[*]}|" \
+        -i "${iso_root}"/boot/grub/kernels.cfg
+}
+
 #}}}

lib/iso/iso.sh

@@ -5,13 +5,13 @@
 get_disturl(){
     # shellcheck disable=1091
     . /usr/lib/os-release
-    echo "${HOME_URL}"
+    printf "%s\n" "${HOME_URL}"
 }
 
 get_osname(){
     # shellcheck disable=1091
     . /usr/lib/os-release
-    echo "${NAME}"
+    printf "%s\n" "${NAME}"
 }
 
 assemble_iso(){

lib/iso/profile.sh

@@ -11,13 +11,16 @@ show_profile(){
 
 load_profile(){
     local profile_dir="${DATADIR}/iso-profiles"
-    [[ -d ${WORKSPACE_DIR}/iso-profiles ]] && profile_dir=${WORKSPACE_DIR}/iso-profiles
+    [[ -d "${WORKSPACE_DIR}"/iso-profiles ]] && profile_dir="${WORKSPACE_DIR}"/iso-profiles
 
-    ROOT_LIST="$profile_dir/${profile}/Packages-Root"
-    ROOT_OVERLAY="$profile_dir/${profile}/root-overlay"
+    root_list="$profile_dir/${profile}/Packages-Root"
+    root_overlay="$profile_dir/${profile}/root-overlay"
 
-    [[ -f "$profile_dir/${profile}/Packages-Live" ]] && LIVE_LIST="$profile_dir/${profile}/Packages-Live"
-    [[ -d "$profile_dir/${profile}/live-overlay" ]] && LIVE_OVERLAY="$profile_dir/${profile}/live-overlay"
+    [[ -f "$profile_dir/${profile}/Packages-Live" ]] && live_list="$profile_dir/${profile}/Packages-Live"
+    [[ -d "$profile_dir/${profile}/live-overlay" ]] && live_overlay="$profile_dir/${profile}/live-overlay"
+
+    common_dir="${DATADIR}/iso-profiles/common"
+    [[ -d "$profile_dir"/common ]] && common_dir="${profile_dir}"/common
 
     [[ -f $profile_dir/${profile}/profile.conf ]] || return 1
 
@@ -35,28 +38,49 @@ load_profile(){
     return 0
 }
 
-load_pkgs(){
-    local pkglist="$1" init="$2"
-    msg2 "Loading Packages: [%s] ..." "${pkglist##*/}"
+read_from_list() {
+    local list="$1"
+    local _space="s| ||g"
+    local _clean=':a;N;$!ba;s/\n/ /g'
+    local _com_rm="s|#.*||g"
 
-    local _init="s|@$init||g" _init_rm1 _init_rm2
-    case "$init" in
-        'openrc') _init_rm1="s|@runit.*||g"; _init_rm2="s|@s6.*||g" ;;
-        's6') _init_rm1="s|@runit.*||g"; _init_rm2="s|@openrc.*||g" ;;
-        'runit') _init_rm1="s|@s6.*||g"; _init_rm2="s|@openrc.*||g" ;;
-    esac
+    local _init="s|@initsys@|${INITSYS}|g"
 
-    local _space="s| ||g" \
-        _clean=':a;N;$!ba;s/\n/ /g' \
-        _com_rm="s|#.*||g"
-
-    packages=($(sed "$_com_rm" "$pkglist" \
+    msg2 "Loading Packages: [%s] ..." "${list##*/}"
+    packages+=($(sed "$_com_rm" "$list" \
             | sed "$_space" \
-            | sed "$_purge" \
             | sed "$_init" \
-            | sed "$_init_rm1" \
-            | sed "$_init_rm2" \
             | sed "$_clean"))
 }
 
+read_from_services() {
+    for svc in "${SERVICES[@]}"; do
+        case "$svc" in
+            sddm|gdm|lightdm|mdm|greetd|lxdm|xdm)
+                packages+=("$svc-${INITSYS}"); display_manager="$svc" ;;
+            NetworkManager) packages+=("networkmanager-${INITSYS}") ;;
+            connmand) packages+=("connman-${INITSYS}") ;;
+            cupsd) packages+=("cups-${INITSYS}") ;;
+            bluetoothd) packages+=("bluez-${INITSYS}") ;;
+            syslog-ng|metalog) packages+=("$svc-${INITSYS}") ;;
+        esac
+    done
+}
+
+load_pkgs(){
+    local pkglist="$1"
+    packages=()
+
+    if [[ "${pkglist##*/}" == "Packages-Root" ]]; then
+        read_from_list "${common_dir}/Packages-base"
+        read_from_list "${common_dir}/Packages-apps"
+        read_from_list "${common_dir}/Packages-${INITSYS}"
+        [[ -n "${live_list}" ]] && read_from_list "${common_dir}/Packages-xorg"
+        read_from_list "$pkglist"
+        read_from_services
+    else
+        read_from_list "$pkglist"
+    fi
+}
+
 #}}}

lib/iso/services.sh

@@ -23,30 +23,46 @@ add_svc_runit(){
 }
 
 add_svc_s6(){
-    local mnt="$1" names="$2" rlvl="${3:-default}" error ret
+    local mnt="$1" names="$2" rlvl="${3:-default}" dep
+    dep="$mnt"/etc/s6/sv/"$display_manager"-srv/dependencies.d
     for svc in $names; do
-        error=false
-        chroot "$mnt" s6-rc-db -c /etc/s6/rc/compiled type "$svc" &> /dev/null || error=true
-        ret="$?"
-        if [ $ret -eq 0 ] && [[ "$error" == false ]]; then
-            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
-            chroot "$mnt" s6-rc-bundle-update -c /etc/s6/rc/compiled add "$rlvl" "$svc"
+        msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+        chroot "$mnt" s6-service add "$rlvl" "$svc"
+        if [[ "$svc" == "$display_manager" ]]; then
+            if [[ -d "$dep" ]]; then
+                touch "$dep"/artix-live
+            fi
         fi
     done
 
-    # force artix-live as a dependency if these display managers exist
-#     for displaymanager in gdm lightdm-srv lxdm sddm; do
-#         if [ -f "${work_dir}"/rootfs/etc/s6/sv/$displaymanager/dependencies ]; then
-#             echo "artix-live" >> "${work_dir}"rootfs/etc/s6/sv/$displaymanager/dependencies
-#         fi
-#     done
-#     chroot "$mnt" sh /usr/share/libalpm/scripts/s6-rc-db-update-hook
+    chroot "$mnt" s6-db-reload -r
 
+    local src=/etc/s6/current skel=/etc/s6/skel getty='/usr/bin/agetty -L -8 tty7 115200'
     # rebuild s6-linux-init binaries
-    chroot "$mnt" rm -r /etc/s6/current
-    chroot "$mnt" s6-linux-init-maker -1 -N -f /etc/s6/skel -G "/usr/bin/agetty -L -8 tty1 115200" -c /etc/s6/current /etc/s6/current
-    chroot "$mnt" mv /etc/s6/current/bin/init /etc/s6/current/bin/s6-init
-    chroot "$mnt" cp -a /etc/s6/current/bin /usr
+    chroot "$mnt" rm -r "$src"
+    chroot "$mnt" s6-linux-init-maker -1 -N -f "$skel" -G "$getty" -c "$src" "$src"
+    chroot "$mnt" mv "$src"/bin/init "$src"/bin/s6-init
+    chroot "$mnt" cp -a "$src"/bin /usr
+}
+
+add_svc_suite66(){
+    local mnt="$1" names="$2"
+    for svc in $names; do
+        if [[ -f "$mnt"/etc/66/service/"$svc" ]]; then
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+            chroot "$mnt" 66-enable -t default "$svc" &>/dev/null
+        fi
+    done
+}
+
+add_svc_dinit(){
+    local mnt="$1" names="$2"
+    for svc in $names; do
+        if [[ -d $mnt/etc/dinit.d/boot.d ]]; then
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+            chroot "$mnt" ln -s ../"$svc" /etc/dinit.d/boot.d/"$svc" &>/dev/null
+        fi
+    done
 }
 
 #}}}

lib/iso/squash.sh

@@ -2,24 +2,6 @@
 
 #{{{ squash
 
-make_sig () {
-    local file="$1"
-    msg2 "Creating signature file..."
-    cd "${iso_root}${live_dir}"
-    chown "${owner}:$(id --group "${owner}")" "${iso_root}${live_dir}"
-    su "${owner}" -c "gpg --detach-sign --default-key ${GPG_KEY} $file"
-    chown -R root "${iso_root}${live_dir}"
-    cd "${OLDPWD}"
-}
-
-make_checksum(){
-    local file="$1"
-    msg2 "Creating md5sum ..."
-    cd "${iso_root}${live_dir}"
-    md5sum "$file" > "$file".md5
-    cd "${OLDPWD}"
-}
-
 make_ext_img(){
     local src="$1"
     local size=32G
@@ -85,14 +67,14 @@ make_sfs() {
 
         mksfs_args+=("${sfs_out}")
 
-        mksfs_args+=(-comp xz -b 256K -Xbcj x86 -noappend)
+        mksfs_args+=(-comp "${COMPRESSION}" "${COMPRESSION_ARGS[@]}" -noappend)
 
         mksquashfs "${mksfs_args[@]}"
 
         if ! ${use_dracut}; then
             make_checksum "${img_name}"
             if [[ -n ${GPG_KEY} ]];then
-                make_sig "${img_name}"
+                make_sig "${iso_root}${live_dir}/${img_name}"
             fi
         fi
         if ${persist}; then

lib/pkg/common.sh

@@ -0,0 +1,37 @@
+#!/hint/bash
+
+#{{{ common functions
+
+get_compliant_name(){
+    local gitname="$1"
+    case "$gitname" in
+        *+) gitname=${gitname//+/plus} ;;
+        *+*) gitname=${gitname//+/-} ;;
+    esac
+    printf "%s\n" "$gitname"
+}
+
+get_pkg_org(){
+    local pkg="$1" org sub
+    case ${pkg} in
+        ruby-*) org="packagesRuby" ;;
+        perl-*) org="packagesPerl" ;;
+        python-*) org="packagesPython" ;;
+        *) sub=${pkg:0:1}; org="packages${sub^^}" ;;
+    esac
+    printf "%s\n" "$org"
+}
+
+api_put() {
+    curl -s -X PUT "$@"
+}
+
+api_delete() {
+    curl -s -X DELETE "$@"
+}
+
+api_post() {
+    curl -s -X POST "$@"
+}
+
+#}}}

lib/pkg/deploy.sh

@@ -2,6 +2,8 @@
 
 #{{{ functions
 
+shopt -s extglob
+
 find_cached_pkgfile() {
     local searchdirs=("$PKGDEST" "$PWD") results=()
     local pkg="$1"
@@ -25,13 +27,15 @@ find_cached_pkgfile() {
     esac
 }
 
+shopt -u extglob
+
 get_pkgbasename() {
     local name="$1"
     local rm_pkg=${name%.pkg.tar*}
     rm_pkg=${rm_pkg%-*}
     rm_pkg=${rm_pkg%-*}
     rm_pkg=${rm_pkg%-*}
-    echo "$rm_pkg"
+    printf "%s\n" "$rm_pkg"
 }
 
 #}}}

lib/pkg/diff.sh

@@ -0,0 +1,75 @@
+#!/hint/bash
+
+#{{{ functions
+
+pkgver_equal() {
+    if [[ $1 = *-* && $2 = *-* ]]; then
+        # if both versions have a pkgrel, then they must be an exact match
+        [[ $1 = "$2" ]]
+    else
+        # otherwise, trim any pkgrel and compare the bare version.
+        [[ ${1%%-*} = "${2%%-*}" ]]
+    fi
+}
+
+shopt -s extglob
+
+find_cached_package() {
+    local searchdirs=("$PWD" "$PKGDEST") results=()
+    local targetname=$1 targetver=$2 targetarch=$3
+    local dir pkg packages pkgbasename name ver rel arch r results
+
+    for dir in "${searchdirs[@]}"; do
+        [[ -d $dir ]] || continue
+
+        shopt -s extglob nullglob
+        mapfile -t packages < <(printf "%s\n" "$dir"/"${targetname}"-"${targetver}"-*"${targetarch}".pkg.tar?(.!(sig|*.*)))
+        shopt -u extglob nullglob
+
+        for pkg in "${packages[@]}"; do
+            [[ -f $pkg ]] || continue
+
+            # avoid adding duplicates of the same inode
+            for r in "${results[@]}"; do
+                [[ $r -ef $pkg ]] && continue 2
+            done
+
+            # split apart package filename into parts
+            pkgbasename=${pkg##*/}
+            pkgbasename=${pkgbasename%.pkg.tar*}
+
+            arch=${pkgbasename##*-}
+            pkgbasename=${pkgbasename%-"$arch"}
+
+            rel=${pkgbasename##*-}
+            pkgbasename=${pkgbasename%-"$rel"}
+
+            ver=${pkgbasename##*-}
+            name=${pkgbasename%-"$ver"}
+
+            if [[ $targetname = "$name" && $targetarch = "$arch" ]] &&
+                pkgver_equal "$targetver" "$ver-$rel"; then
+                results+=("$pkg")
+            fi
+        done
+    done
+
+    case ${#results[*]} in
+        0)
+            return 1
+        ;;
+        1)
+            printf '%s\n' "${results[0]}"
+            return 0
+        ;;
+        *)
+            error 'Multiple packages found:'
+            printf '\t%s\n' "${results[@]}" >&2
+            return 1
+        ;;
+    esac
+}
+
+shopt -u extglob
+
+#}}}

lib/pkg/git.sh

@@ -2,59 +2,6 @@
 
 #{{{ git
 
-get_compliant_name(){
-    local gitname="$1"
-    case "$gitname" in
-        *+) gitname=${gitname//+/plus}
-    esac
-    echo "$gitname"
-}
-
-get_pkg_org(){
-    local pkg="$1" org sub
-    case ${pkg} in
-        ruby-*) org="packagesRuby" ;;
-        perl-*) org="packagesPerl" ;;
-        python-*|python2-*) org="packagesPython" ;;
-        *) sub=${pkg:0:1}; org="packages${sub^^}" ;;
-    esac
-    echo "$org"
-}
-
-get_team_id() {
-    local org="$1" team="$2"
-    local id
-    id=$(curl -s -X GET "${GIT_URL}/api/v1/orgs/$org/teams/search?q=$team&access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json" | jq '.data[] .id')
-    echo "$id"
-}
-
-add_repo_to_team() {
-    local pkg="$1" org="$2" team="$3"
-    local id
-    id=$(get_team_id "$org" "$team")
-    local gitname
-    gitname=$(get_compliant_name "$pkg")
-
-    msg2 "Adding package repo [%s] to team (%s)" "$gitname" "$team"
-
-    curl -s -X PUT "${GIT_URL}/api/v1/teams/$id/repos/$org/$gitname?access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json"
-}
-
-remove_repo_from_team() {
-    local pkg="$1" org="$2" team="$3"
-    local id
-    id=$(get_team_id "$org" "$team")
-    local gitname
-    gitname=$(get_compliant_name "$pkg")
-
-    msg2 "Removing package repo [%s] from team (%s)" "$gitname" "$team"
-
-    curl -s -X DELETE "${GIT_URL}/api/v1/teams/$id/repos/$org/$gitname?access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json"
-}
-
 get_local_head(){
     git log --pretty=%H ...refs/heads/master^ | head -n 1
 }
@@ -75,12 +22,9 @@ has_changeset(){
 }
 
 pull_tree(){
-    local tree="$1" local_head="$2" os="${3:-Artix}"
-    local remote_head
-    remote_head=$(get_remote_head)
-
-    msg "Checking (%s) (%s)" "${tree}" "$os"
-    if has_changeset "${local_head}" "${remote_head}";then
+    local tree="$1" lh="$2" rh
+    rh=$(get_remote_head)
+    if has_changeset "${lh}" "${rh}";then
         git pull origin master
     fi
 }

lib/pkg/gitea.sh

@@ -0,0 +1,31 @@
+#!/hint/bash
+
+#{{{ gitea api
+
+add_team_to_repo() {
+    local name="$1"
+    local org="$2"
+    local team="$3"
+    local url
+
+    url="${GIT_URL}/api/v1/repos/$org/$name/teams/$team?access_token=${GIT_TOKEN}"
+
+    msg2 "Adding team (%s) to package repo [%s]" "$team" "$name"
+
+    api_put "$url" -H  "accept: application/json"
+}
+
+remove_team_from_repo() {
+    local name="$1"
+    local org="$2"
+    local team="$3"
+    local url
+
+    url="${GIT_URL}/api/v1/repos/$org/$name/teams/$team?access_token=${GIT_TOKEN}"
+
+    msg2 "Removing team (%s) from package repo [%s]" "$team" "$name"
+
+    api_delete "$url" -H  "accept: application/json"
+}
+
+#}}}

lib/pkg/jenkins.sh

@@ -6,11 +6,11 @@ write_jenkinsfile(){
     local pkg="$1"
     local jenkins=$pkg/Jenkinsfile
 
-    echo "@Library('artix-ci') import org.artixlinux.RepoPackage" > "$jenkins"
+    printf "@Library('artix-ci') import org.artixlinux.RepoPackage\n" > "$jenkins"
     {
-    echo ''
-    echo 'PackagePipeline(new RepoPackage(this))'
-    echo ''
+    printf '\n'
+    printf 'PackagePipeline(new RepoPackage(this))\n'
+    printf '\n'
     } >> "$jenkins"
 
     git add "$jenkins"
@@ -21,23 +21,23 @@ write_agentyaml(){
     local agent="$pkg"/.artixlinux/agent.yaml label='master'
     [[ -d $pkg/.artixlinux ]] || mkdir "$pkg"/.artixlinux
 
-    echo '---' > "$agent"
+    printf '%s\n' '---' > "$agent"
     {
-    echo ''
-    echo "label: $label"
-    echo ''
+    printf '\n'
+    printf "label: %s\n" "$label"
+    printf '\n'
     } >> "$agent"
 
     git add "$agent"
 }
 
-commit_jenkins_files(){
+commit_ci(){
     local pkg="$1"
 
     write_jenkinsfile "$pkg"
     write_agentyaml "$pkg"
 
-    git commit -m "initial commit"
+    git commit -m "initial ci commit"
 }
 
 #}}}

lib/pkg/repo.sh

@@ -25,25 +25,25 @@ set_arch_repos(){
 find_repo(){
     local pkg="$1" pkgarch="${2:-${CARCH}}" repo
     for r in "${ARCH_REPOS[@]}"; do
-        [[ -f $pkg/repos/$r-$pkgarch/PKGBUILD ]] && repo=repos/"$r-$pkgarch"
-        [[ -f $pkg/repos/$r-any/PKGBUILD ]] && repo=repos/"$r"-any
-        [[ -f $pkg/$pkgarch/$r/PKGBUILD ]] && repo="$pkgarch/$r"
+        [[ -f $pkg/repos/$r-$pkgarch/PKGBUILD ]] && repo="$r-$pkgarch"
+        [[ -f $pkg/repos/$r-any/PKGBUILD ]] && repo="$r"-any
+        [[ -f $pkg/$pkgarch/$r/PKGBUILD ]] && repo="$r"
     done
-    echo "$repo"
+    printf "%s\n" "$repo"
 }
 
 find_pkg(){
     local searchdir="$1" pkg="$2" result
     result=$(find "$searchdir" -mindepth 2 -maxdepth 2 -type d -name "$pkg")
-    echo "$result"
+    printf "%s\n" "$result"
 }
 
 tree_loop(){
     local func="$1" pkgs
     for tree in "${ARTIX_TREE[@]}"; do
-        pkgs=$(find "${TREE_DIR_ARTIX}/$tree" -name repos -o -name "$CARCH")
-        for _package in ${pkgs}; do
-            "$func" "$_package"
+        mapfile -t pkgs < <(find "${TREE_DIR_ARTIX}/$tree" -name "$CARCH" | sort)
+        for p in "${pkgs[@]}"; do
+            "$func" "$p"
         done
     done
 }

lib/pkg/table.sh

@@ -5,32 +5,31 @@
 msg_table_header(){
     local mesg=$1; shift
     # shellcheck disable=2059
-    printf "${BLUE} ${mesg} ${ALL_OFF}\n" "$@" >&2
+    printf "${BLUE} ${mesg} ${ALL_OFF}\n" "$@"
 }
 
-msg_row_downgrade(){
+msg_row_yellow(){
     local mesg=$1; shift
     # shellcheck disable=2059
-    printf "${YELLOW} ${mesg}${ALL_OFF}\n" "$@" >&2
+    printf "${YELLOW} ${mesg}${ALL_OFF}\n" "$@"
 }
 
-msg_row_notify(){
+msg_row_green(){
     local mesg=$1; shift
     # shellcheck disable=2059
-    printf "${GREEN} ${mesg}${ALL_OFF}\n" "$@" >&2
+    printf "${GREEN} ${mesg}${ALL_OFF}\n" "$@"
 }
 
 msg_row(){
     local mesg=$1; shift
-#     printf "${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
     # shellcheck disable=2059
-    printf "${WHITE} ${mesg}${ALL_OFF}\n" "$@" >&2
+    printf "${WHITE} ${mesg}${ALL_OFF}\n" "$@"
 }
 
-msg_row_upgrade(){
+msg_row_red(){
     local mesg=$1; shift
     # shellcheck disable=2059
-    printf "${RED} ${mesg} ${ALL_OFF}\n" "$@" >&2
+    printf "${RED} ${mesg} ${ALL_OFF}\n" "$@"
 }
 
 #}}}

lib/util-iso.sh

@@ -19,6 +19,18 @@ load_iso_config(){
 
     GPG_KEY=${GPG_KEY:-''}
 
+    COMPRESSION="${COMPRESSION:-zstd}"
+
+    COMPRESSION_LEVEL="${COMPRESSION_LEVEL:-15}"
+
+    if [[ -z "${COMPRESSION_ARGS[*]}" ]]; then
+        COMPRESSION_ARGS=(-Xcompression-level "${COMPRESSION_LEVEL}")
+    fi
+
+    if [[ "${COMPRESSION}" == 'xz' ]]; then
+        COMPRESSION_ARGS=(-Xbcj x86)
+    fi
+
     return 0
 }
 

lib/util-pkg.sh

@@ -21,34 +21,8 @@ load_pkg_config(){
 
     TREE_DIR_ARTIX=${TREE_DIR_ARTIX:-"${WORKSPACE_DIR}/artixlinux"}
 
-    ARTIX_TREE=(
-        packages community
-        packages-{gfx,gtk,media,net,qt5,xorg}
-    )
-
-    local dev_tree=(
-        packages-{python,perl,java,ruby}
-        python-{world,galaxy}
-    )
-
-    local init_tree=(packages-{openrc,runit,s6})
-
-    local desktop_tree=(
-        packages-{kf5,plasma,kde,qt6}
-        packages-{lxqt,gnome,cinnamon,mate,xfce,wm}
-    )
-
-    [[ -z ${TREE_NAMES_ARTIX[*]} ]] && \
-    TREE_NAMES_ARTIX=(
-        packages-kernel
-        "${init_tree[@]}"
-        "${dev_tree[@]}"
-        "${desktop_tree[@]}"
-        packages-devel
-        packages-lib32
-    )
-
-    ARTIX_TREE+=("${TREE_NAMES_ARTIX[@]}")
+    [[ -z ${ARTIX_TREE[*]} ]] && \
+    ARTIX_TREE=(main initsys desktop addons lib32)
 
     TREE_DIR_ARCH=${TREE_DIR_ARCH:-"${WORKSPACE_DIR}/archlinux"}
 
@@ -61,7 +35,7 @@ load_pkg_config(){
 
     HOST_TREE_ARCH=${HOST_TREE_ARCH:-'https://github.com/archlinux'}
 
-    DBEXT=${DBEXT:-'xz'}
+    DBEXT=${DBEXT:-'gz'}
 
     return 0
 }