commitpkg: only run braid update if push is success

* use braid instead of git-subrepo

Reviewed-on: artix/artools#63

Makefile

@@ -1,4 +1,4 @@
-V=0.26
+V=0.28
 
 TOOLS = artools
 PREFIX ?= /usr
@@ -40,7 +40,9 @@ PKG_BIN = \
 	bin/pkg/batchpkg \
 	bin/pkg/signpkg \
 	bin/pkg/checkrepo \
-	bin/pkg/gitearepo
+	bin/pkg/gitearepo \
+	bin/pkg/tidyarch \
+	bin/pkg/mkdepgraph
 
 LN_COMMITPKG = \
 	extrapkg \
@@ -71,20 +73,6 @@ LN_BUILDPKG = \
 	buildpkg-kde-wobble \
 	buildpkg-gnome-wobble
 
-LN_DEPLOYPKG = \
-	deploypkg-system \
-	deploypkg-world \
-	deploypkg-gremlins \
-	deploypkg-goblins \
-	deploypkg-galaxy \
-	deploypkg-galaxy-gremlins \
-	deploypkg-galaxy-goblins \
-	deploypkg-lib32 \
-	deploypkg-lib32-gremlins \
-	deploypkg-lib32-goblins \
-	deploypkg-kde-wobble \
-	deploypkg-gnome-wobble
-
 PKG_DATA = \
 	data/pacman/makepkg.conf \
 	data/valid-names.conf
@@ -155,9 +143,6 @@ install_pkg:
 
 	for l in $(LN_COMMITPKG); do $(LN) commitpkg $(DESTDIR)$(BINDIR)/$$l; done
 	for l in $(LN_BUILDPKG); do $(LN) buildpkg $(DESTDIR)$(BINDIR)/$$l; done
-	for l in $(LN_DEPLOYPKG); do $(LN) deploypkg $(DESTDIR)$(BINDIR)/$$l; done
-
-	$(LN) artix-chroot $(DESTDIR)$(BINDIR)/artools-chroot
 
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
 	install $(FILEMODE) $(PKG_DATA) $(DESTDIR)$(DATADIR)/$(TOOLS)

README.md

@@ -23,7 +23,7 @@ artools
 
 - pkg:
   * namcap
-  * git-subrepo
+  * ruby-braid
   * rsync
 
 - iso:

bin/base/artix-chroot.in

@@ -18,134 +18,34 @@ m4_include(lib/base/message.sh)
 m4_include(lib/base/chroot.sh)
 m4_include(lib/base/mount.sh)
 
-#{{{ functions
-
-chroot_part_mount() {
-    msg2 "mount: [%s]" "$2"
-    mount "$@" && CHROOT_ACTIVE_PART_MOUNTS=("$2" "${CHROOT_ACTIVE_PART_MOUNTS[@]}")
-}
-
-chroot_part_umount() {
-    chroot_api_umount
-    msg2 "umount: [%s]" "${CHROOT_ACTIVE_PART_MOUNTS[@]}"
-    umount "${CHROOT_ACTIVE_PART_MOUNTS[@]}"
-    unset CHROOT_ACTIVE_PART_MOUNTS
-}
-
-detect(){
-    local detected
-    detected="$(os-prober | tr ' ' '_' | paste -s -d ' ')"
-    echo "${detected}"
-}
-
-# $1: os-prober array
-get_os_name(){
-    local str=$1
-    str="${str#*:}"
-    str="${str#*:}"
-    str="${str%:*}"
-    echo "$str"
-}
-
-mount_os(){
-    CHROOT_ACTIVE_PART_MOUNTS=()
-    CHROOT_ACTIVE_MOUNTS=()
-
-    trap_setup chroot_part_umount
-
-    chroot_part_mount "$2" "$1"
-
-    local mounts
-    mounts=$(perl -ane 'printf("%s:%s\n", @F[0,1]) if $F[0] =~ m#^UUID=#;' "$1"/etc/fstab)
-
-    for entry in ${mounts}; do
-        entry=${entry//UUID=}
-        local dev=${entry%:*} mp=${entry#*:}
-        case "${entry#*:}" in
-            '/'|'swap'|'none') continue ;;
-            *) chroot_part_mount "/dev/disk/by-uuid/${dev}" "$1${mp}" ;;
-        esac
-    done
-
-    chroot_setup "$1" true
-    chroot_add_resolv_conf "$1"
-}
-
-select_os(){
-    local os_list=( "$(detect)" ) count=${#os_list[@]}
-    if [[ ${count} -gt 1 ]];then
-        msg "Detected systems:"
-        local i=0
-        for os in "${os_list[@]}"; do
-            local last=${os##*:}
-            case $last in
-                'efi') count=$((count-1)) ;;
-                *) msg2 "$i) $(get_os_name "$os")"; i=$((i+1)) ;;
-            esac
-        done
-        i=0
-        msg "Select system to mount [0-%s] : " "$((count-1))"
-        read -r select
-    else
-        select=0
-    fi
-    local os_str=${os_list[$select]} type
-    type=$os_str
-    root=${os_str%%:*}
-    type=${type##*:}
-    if [[ "${type##*:}" == 'linux' ]];then
-        msg "Mounting (%s) [%s]" "$(get_os_name "$os_str")" "$root"
-        mount_os "$1" "$root"
-    else
-        die "You can't mount %s!" "$select"
-    fi
-}
-
-#}}}
-
-automount=false
 
 usage() {
-    echo "usage: ${0##*/} -a [or] ${0##*/} chroot-dir [command]"
-    echo '    -a             Automount detected linux system'
-    echo '    -h             Print this help message'
-    echo ''
-    echo "    If 'command' is unspecified, ${0##*/} will launch /bin/sh."
-    echo ''
-    echo "    If 'automount' is true, ${0##*/} will launch /bin/bash"
-    echo "    and ${chrootdir}."
-    echo ''
-    echo ''
+    printf 'usage: %s chroot-dir [command]\n' "${0##*/}"
+    printf '    -h             Print this help message\n'
+    printf '\n'
+    printf "    If 'command' is unspecified, %s will launch /bin/sh.\n" "${0##*/}"
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
-opts=':ha'
+opts=':h'
 
 while getopts ${opts} arg; do
     case "${arg}" in
-        a) automount=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument ${arg}"; usage 1 ;;
     esac
 done
 shift $(( OPTIND - 1 ))
 
 check_root
 
-if ${automount};then
-    chrootdir=/mnt
-    run_args=(/bin/bash)
+chrootdir=$1
+shift
 
-    select_os "${chrootdir}"
-else
-    chrootdir=$1
-    shift
-    run_args=("$@")
+[[ -d ${chrootdir} ]] || die "Can't create chroot on non-directory %s" "${chrootdir}"
 
-    [[ -d ${chrootdir} ]] || die "Can't create chroot on non-directory %s" "${chrootdir}"
+chroot_api_mount "${chrootdir}" || die "failed to setup API filesystems in chroot %s" "${chrootdir}"
+chroot_add_resolv_conf "${chrootdir}"
 
-    chroot_api_mount "${chrootdir}" || die "failed to setup API filesystems in chroot %s" "${chrootdir}"
-    chroot_add_resolv_conf "${chrootdir}"
-fi
-
-SHELL=/bin/sh unshare --fork --pid chroot "${chrootdir}" "${run_args[@]}"
+SHELL=/bin/sh unshare --fork --pid chroot "${chrootdir}" "$@"

bin/base/basestrap.in

@@ -55,19 +55,19 @@ copymirrorlist=1
 pacmode=-Sy
 
 usage() {
-    echo "usage: ${0##*/} [options] root [packages...]"
-    echo " -C <config>      Use an alternate config file for pacman"
-    echo " -c               Use the package cache on the host, rather than the target"
-    echo " -G               Avoid copying the host's pacman keyring to the target"
-    echo " -i               Avoid auto-confirmation of package selections"
-    echo " -M               Avoid copying the host's mirrorlist to the target"
-    echo ' -U               Use pacman -U to install packages'
-    echo " -h               Print this help message"
-    echo ''
-    echo ' basestrap installs packages to the specified new root directory.'
-    echo ' If no packages are given, basestrap defaults to the "base" group.'
-    echo ''
-    echo ''
+    printf "usage: %s [options] root [packages...]\n" "${0##*/}"
+    printf " -C <config>      Use an alternate config file for pacman\n"
+    printf " -c               Use the package cache on the host, rather than the target\n"
+    printf " -G               Avoid copying the host's pacman keyring to the target\n"
+    printf " -i               Avoid auto-confirmation of package selections\n"
+    printf " -M               Avoid copying the host's mirrorlist to the target\n"
+    printf ' -U               Use pacman -U to install packages\n'
+    printf " -h               Print this help message\n"
+    printf '\n'
+    printf ' basestrap installs packages to the specified new root directory.\n'
+    printf ' If no packages are given, basestrap defaults to the "base" group.\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -81,8 +81,7 @@ while getopts ${opts} arg; do
         G) copykeyring=0 ;;
         M) copymirrorlist=0 ;;
         U) pacmode=-U ;;
-        :) echo "invalid argument ${arg}:$OPTARG"; usage 1;;
-        ?) usage 0 ;;
+        h|?) usage 0 ;;
     esac
 done
 shift $(( OPTIND - 1 ))

bin/base/chroot-run.in

@@ -45,18 +45,18 @@ files=()
 mount_args=("-B:/etc/hosts:/etc/hosts")
 
 usage() {
-    echo "Usage: ${0##*/} [options] working-dir [run arguments]"
-    echo "A wrapper around chroot. Provides support for pacman."
-    echo
-    echo ' options:'
-    echo '    -C <file>     Location of a pacman config file'
-    echo '    -M <file>     Location of a makepkg config file'
-    echo '    -c <dir>      Set pacman cache'
-    echo '    -f <file>     Copy file from the host to the chroot'
-    echo '    -s            Do not run setarch'
-    echo '    -b <list>     Bind mountargs'
-    echo '                  List format [mntarg1:src1:dest1 ... mntargN:srcN:destN]'
-    echo '    -h            This message'
+    printf "Usage: %s [options] working-dir [run arguments]\n" "${0##*/}"
+    printf "A wrapper around chroot. Provides support for pacman.\n"
+    printf '\n'
+    printf ' options:\n'
+    printf '    -C <file>     Location of a pacman config file\n'
+    printf '    -M <file>     Location of a makepkg config file\n'
+    printf '    -c <dir>      Set pacman cache\n'
+    printf '    -f <file>     Copy file from the host to the chroot\n'
+    printf '    -s            Do not run setarch\n'
+    printf '    -b <list>     Bind mountargs\n'
+    printf '                  List format [mntarg1:src1:dest1 ... mntargN:srcN:destN]\n'
+    printf '    -h            This message\n'
     exit 1
 }
 
@@ -71,7 +71,6 @@ while getopts ${opts} arg; do
         s) nosetarch=1 ;;
         b) bindmounts+=("$OPTARG"); mount_args+=(${bindmounts[@]}) ;;
         h|?) usage ;;
-        *) error "invalid argument '$arg'"; usage ;;
     esac
 done
 shift $(( OPTIND - 1 ))
@@ -95,7 +94,7 @@ host_mirrors=($(pacman-conf --repo world Server 2> /dev/null | sed -r 's#(.*/)wo
 for host_mirror in "${host_mirrors[@]}"; do
     if [[ $host_mirror == *file://* ]]; then
         # shellcheck disable=2016
-        host_mirror=$(echo "$host_mirror" | sed -r 's#file://(/.*)/\$repo/os/\$arch#\1#g')
+        host_mirror=$(printf "%s\n" "$host_mirror" | sed -r 's#file://(/.*)/\$repo/os/\$arch#\1#g')
         in_array "$host_mirror" "${cache_dirs[@]}" || cache_dirs+=("$host_mirror")
     fi
 done

bin/base/mkchroot.in

@@ -23,15 +23,15 @@ files=()
 chroot_args=()
 
 usage() {
-    echo "Usage: ${0##*/} [options] working-dir package-list..."
-    echo ' options:'
-    echo '    -U            Use pacman -U to install packages'
-    echo '    -C <file>     Location of a pacman config file'
-    echo '    -M <file>     Location of a makepkg config file'
-    echo '    -c <dir>      Set pacman cache'
-    echo '    -f <file>     Copy file from the host to the chroot'
-    echo '    -s            Do not run setarch'
-    echo '    -h            This message'
+    printf "Usage: %s [options] working-dir package-list...\n" "${0##*/}"
+    printf ' options:\n'
+    printf '    -U            Use pacman -U to install packages\n'
+    printf '    -C <file>     Location of a pacman config file\n'
+    printf '    -M <file>     Location of a makepkg config file\n'
+    printf '    -c <dir>      Set pacman cache\n'
+    printf '    -f <file>     Copy file from the host to the chroot\n'
+    printf '    -s            Do not run setarch\n'
+    printf '    -h            This message\n'
     exit 1
 }
 
@@ -46,7 +46,6 @@ while getopts ${opts} arg; do
         f) files+=("$OPTARG") ;;
         s) nosetarch=1 ;;
         h|?) usage ;;
-        *) error "invalid argument '%s'" "$arg"; usage ;;
     esac
     if [[ $arg != U ]]; then
         chroot_args+=("-$arg")
@@ -95,9 +94,9 @@ basestrap -${umode}Mc ${pacman_conf:+-C "$pacman_conf"} "$working_dir" \
     "${cache_dirs[@]/#/--cachedir=}" "$@" || die 'Failed to install all packages'
 
 printf '%s.UTF-8 UTF-8\n' en_US de_DE > "$working_dir/etc/locale.gen"
-echo 'LANG=en_US.UTF-8' > "$working_dir/etc/locale.conf"
-# echo 'KEYMAP=en' > "$working_dir/etc/vconsole.conf"
-echo "${CHROOTVERSION}" > "$working_dir/.artools"
+printf 'LANG=en_US.UTF-8\n' > "$working_dir/etc/locale.conf"
+# printf 'KEYMAP=en\n' > "$working_dir/etc/vconsole.conf"
+printf "%s\n" "${CHROOTVERSION}" > "$working_dir/.artools"
 
 dbus-uuidgen --ensure="$working_dir"/etc/machine-id
 

bin/iso/buildiso.in

@@ -181,7 +181,7 @@ gen_iso_fn(){
     for n in "${vars[@]}"; do
         name=${name:-}${name:+-}${n}
     done
-    echo "$name"
+    printf "%s\n" "$name"
 }
 
 prepare_build(){
@@ -325,28 +325,28 @@ chroots_iso="${CHROOTS_DIR}/buildiso"
 arch=$(uname -m)
 
 usage() {
-    echo "Usage: ${cmd} [options]"
-    echo "    -p <profile>       Profile [default: ${profile}]"
-    echo '    -r <dir>           Chroots directory'
-    echo "                       [default: ${chroots_iso}]"
-    echo '    -t <dir>           Target directory'
-    echo "                       [default: ${ISO_POOL}]"
-    echo '    -i <name>          Init system to use'
-    echo "                       [default: ${INITSYS}]"
-    echo '    -g <key>           The gpg key for img signing'
-    echo "                       [default: none]"
-    echo '    -m                 Set SquashFS image mode to persistence'
-    echo '    -c                 Disable clean work dir'
-    echo '    -x                 Build chroot only'
-    echo '    -s                 Squash chroot only'
-    echo '    -b                 Generate iso boot only'
-    echo '    -z                 Generate iso only'
-    echo '                       Requires pre built images (-x)'
-    echo '    -d                 Use dracut instead of mkinitcpio for iso initramfs'
-    echo '    -q                 Query settings and pretend build'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
+    printf 'Usage: %s [options]\n' "${cmd}"
+    printf '    -p <profile>       Profile [default: %s]\n' "${profile}"
+    printf '    -r <dir>           Chroots directory\n'
+    printf '                       [default: %s]\n' "${chroots_iso}"
+    printf '    -t <dir>           Target directory\n'
+    printf '                       [default: %s]\n' "${ISO_POOL}"
+    printf '    -i <name>          Init system to use\n'
+    printf '                       [default: %s]\n' "${INITSYS}"
+    printf '    -g <key>           The gpg key for img signing\n'
+    printf '                       [default: none]\n'
+    printf '    -m                 Set SquashFS image mode to persistence\n'
+    printf '    -c                 Disable clean work dir\n'
+    printf '    -x                 Build chroot only\n'
+    printf '    -s                 Squash chroot only\n'
+    printf '    -b                 Generate iso boot only\n'
+    printf '    -z                 Generate iso only\n'
+    printf '                       Requires pre built images (-x)\n'
+    printf '    -d                 Use dracut instead of mkinitcpio for iso initramfs\n'
+    printf '    -q                 Query settings and pretend build\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -368,7 +368,6 @@ while getopts "${opts}" arg; do
         d) use_dracut=true ;;
         q) pretend=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/batchpkg.in

@@ -28,9 +28,9 @@ batch_move() {
         src=${src#*:}
         local dest=${entry%%:*}
         if ${runlist}; then
-            "${dest}"pkg -s "${src}" -u -p "${pkg}"
+            "${dest}"pkg -s "${src}" -p "${pkg}"
         else
-            msg "%s" "${dest}pkg -s ${src} -u -p ${pkg}"
+            msg "%s" "${dest}pkg -s ${src} -p ${pkg}"
         fi
     done < "$pkglist"
 }
@@ -65,10 +65,10 @@ batch_update() {
         local dest=${entry%:*}
         if ${runlist}; then
             buildtree -i -p "${pkg}"
-            "${dest}"pkg -u -p "${pkg}"
+            "${dest}"pkg -p "${pkg}"
         else
             msg "buildtree -i -p ${pkg}"
-            msg2 "${dest}pkg -u -p ${pkg}"
+            msg2 "${dest}pkg -p ${pkg}"
         fi
     done < "$pkglist"
 }
@@ -76,13 +76,13 @@ batch_update() {
 #}}}
 
 usage() {
-    echo "Usage: ${0##*/} [optional listname]"
-    echo '    -r                 Run generated commands'
-    echo '    -c                 Create subrepos from list'
-    echo '    -u                 Update subrepos from list'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
+    printf 'Usage: %s [optional listname]\n' "${0##*/}"
+    printf '    -r                 Run generated commands\n'
+    printf '    -c                 Create pkgrepos from list\n'
+    printf '    -u                 Update pkgrepos from list\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -98,7 +98,6 @@ while getopts "${opts}" arg; do
         c) create=true ;;
         u) update=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/buildpkg.in

@@ -29,17 +29,17 @@ chroots_pkg="${CHROOTS_DIR}/buildpkg"
 arch=$(uname -m)
 
 usage() {
-    echo "Usage: ${0##*/} [options] -- [mkchrootpkg_args]"
-    echo "    -r <dir>           Create chroots in this directory"
-    echo "    -d <dir>           Destination repo chroot"
-    echo '    -c                 Recreate the chroot before building'
-    echo '    -m                 Major rebuild'
-    echo '    -N                 Disable check() function'
-    echo '    -C                 Run checkpkg after built'
-    echo '    -h                 This help'
-    echo ''
-    echo "Default mkchrootpkg_args args: ${mkchrootpkg_args[*]}"
-    echo ''
+    printf 'Usage: %s [options] -- [mkchrootpkg_args]\n' "${0##*/}"
+    printf '    -r <dir>           Create chroots in this directory\n'
+    printf '    -d <dir>           Destination repo chroot\n'
+    printf '    -c                 Recreate the chroot before building\n'
+    printf '    -m                 Major rebuild\n'
+    printf '    -N                 Disable check() function\n'
+    printf '    -C                 Run checkpkg after built\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf 'Default mkchrootpkg_args args: %s\n' "${mkchrootpkg_args[*]}"
+    printf '\n'
     exit "$1"
 }
 
@@ -54,7 +54,6 @@ while getopts "${opts}" arg; do
         C) mkchrootpkg_args+=(-C) ;;
         N) mkchrootpkg_args+=(-N) ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '%s'" "${arg}"; usage 1 ;;
     esac
 done
 

bin/pkg/buildtree.in

@@ -23,88 +23,81 @@ m4_include(lib/pkg/jenkins.sh)
 
 #{{{ new git repo
 
-subrepo_clone(){
-    local pkg="$1"
-    local org="$2"
-    local name="$3"
-
-    msg2 "Subrepo clone [%s] from (%s)" "$pkg" "$org/$name"
-    git subrepo clone "${GIT_SSH}":"$org"/"$name".git "$pkg"
-}
-
-subrepo_new(){
+pkgrepo_new(){
     cd "${TREE_DIR_ARTIX}/${group}" || return
 
     local org gitname
     org=$(get_pkg_org "${package}")
     gitname=$(get_compliant_name "${package}")
 
-    gitearepo -cr "$gitname"
+    if [[ ! -d "${package}" ]]; then
+        gitearepo -cr "$gitname"
 
-    add_team_to_repo "$gitname" "$org" "${team}"
+        add_team_to_repo "$gitname" "$org" "${team}"
 
-    subrepo_clone "${package}" "$org" "$gitname"
+        msg2 "Adding [%s] from (%s)" "${package}" "$org/$gitname"
+        braid add "${GIT_SSH}":"$org/$gitname".git "${package}"
 
-    mkdir -p "${TREE_DIR_ARTIX}/${group}/${package}/trunk"
+        prepare_dir "${TREE_DIR_ARTIX}/${group}/${package}/trunk"
 
-    commit_jenkins_files "${package}"
+        commit_jenkins_files "${package}"
+    else
+        die "Package %s already exists!" "${package}"
+    fi
 }
 
 #}}}
 
 #{{{ pull
 
-clone_tree(){
-    local url="$1" tree="$2" os="${3:-Artix}"
-
-    msg "Cloning %s (%s) ..." "$tree" "$os"
-
-    git clone "$url/$tree".git
+config_tree() {
+    local dist="$1" vars="${2:-false}"
+    case "$dist" in
+        Artix)
+            if "$vars"; then
+                dist_tree=("${ARTIX_TREE[@]}")
+                dist_url="${GIT_SSH}:pkgbuild"
+                dist_dir=${TREE_DIR_ARTIX}
+            else
+                git config --bool pull.rebase true
+                git config commit.gpgsign true
+                if [[ -n "${GPGKEY}" ]];then
+                    git config user.signingkey "${GPGKEY}"
+                else
+                    warning "No GPGKEY configured in makepkg.conf!"
+                fi
+            fi
+        ;;
+        Arch)
+            if "$vars"; then
+                dist_tree=("${ARCH_TREE[@]}")
+                dist_url="${HOST_TREE_ARCH}"
+                dist_dir=${TREE_DIR_ARCH}
+            else
+                git config --bool pull.rebase false
+                git config branch.master.mergeoptions --no-edit
+            fi
+        ;;
+    esac
 }
 
-pull_tree_arch(){
-    cd "${TREE_DIR_ARCH}" || return
-    for tree in "${ARCH_TREE[@]}";do
-        if [[ -d "${tree}" ]];then
-            ( cd "${tree}" || return
-                pull_tree "${tree}" "$(get_local_head)" "Arch"
+update_tree() {
+    local dist="${1:-Artix}"
+    config_tree "$dist" true
+    cd "$dist_dir" || return
+    for tree in "${dist_tree[@]}"; do
+        if [[ -d "$tree" ]]; then
+            ( cd "$tree" || return
+                config_tree "$dist"
+                msg "Checking (%s) (%s)" "$tree" "$dist"
+                pull_tree "$tree" "$(get_local_head)"
             )
         else
-            clone_tree "${HOST_TREE_ARCH}" "${tree}" "Arch"
-        fi
-    done
-}
-
-config_tree(){
-    local tree="$1"
-    cd "$tree" || return
-        git config --bool pull.rebase true
-        git config commit.gpgsign true
-        if [[ -n "${GPGKEY}" ]];then
-            git config user.signingkey "${GPGKEY}"
-        else
-            warning "No GPGKEY configured in makepkg.conf!"
-        fi
-    cd ..
-}
-
-pull_tree_artix(){
-    local repos=()
-    if ${sync_group}; then
-        repos=("${group}")
-    else
-        repos=("${ARTIX_TREE[@]}")
-    fi
-    cd "${TREE_DIR_ARTIX}" || return
-    for tree in "${repos[@]}"; do
-        if [[ -d "${tree}" ]];then
-            config_tree "${tree}"
-            ( cd "${tree}" || return
-                pull_tree "${tree}" "$(get_local_head)"
+            msg "Cloning (%s) (%s) ..." "$tree" "$dist"
+            git clone "$dist_url/$tree".git
+            ( cd "$tree" || return
+                config_tree "$dist"
             )
-        else
-            clone_tree "${host_tree_artix}" "${tree}"
-            config_tree "${tree}"
         fi
     done
 }
@@ -199,14 +192,14 @@ from_arch(){
     [[ -z $srcpath ]] && die "Package '%s' does not exist!" "${package}"
 
     repo=$(find_repo "$srcpath")
-    msg "repo: %s" "${repo#*/}"
+    msg "repo: %s" "$repo"
 
-    archpath=$srcpath/$repo
+    archpath=$srcpath/repos/$repo
     artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${package}")
 
     show_deps "$archpath"
 
-    if [[ -f "$artixpath"/.gitrepo ]]; then
+    if [[ -f "$artixpath"/Jenkinsfile ]]; then
         artixpath="$artixpath"/trunk
 
         if [[ -d "$artixpath" ]];then
@@ -225,7 +218,7 @@ view_build(){
     archpath=$(find_pkg "${TREE_DIR_ARCH}" "${package}")
     [[ -z $archpath ]] && die "Package '%s' does not exist!" "${package}"
     repo=$(find_repo "${archpath}")
-    archpath=$archpath/$repo
+    archpath=$archpath/repos/$repo
     msg "repo: %s" "${repo#*/}"
     show_deps "$archpath"
 }
@@ -243,8 +236,8 @@ check_tree(){
 }
 
 sync_repos(){
-    ${sync_arch} && pull_tree_arch
-    ${sync_artix} && pull_tree_artix
+    ${sync_arch} && update_tree "Arch"
+    ${sync_artix} && update_tree
 }
 
 load_makepkg_config
@@ -261,7 +254,6 @@ sync_artix=true
 import=false
 view=false
 createnew=false
-sync_group=false
 check=false
 
 package=''
@@ -269,29 +261,27 @@ package=''
 team='community'
 group="${ARTIX_TREE[0]}"
 
-host_tree_artix="${GIT_SSH}:artixlinux"
-
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo '    -p <pkg>      Package name'
-    echo '    -t <team>     Team name (only with -n)'
-    echo '                  Possible values: core,extra,community,multilib'
-    echo "                  [default: ${team}]"
-    echo '    -g <group>    Group name, the superrepo (only with -n or -s)'
-    echo "                  [default: ${group}]"
-    echo "    -s            Clone or pull repos"
-    echo "    -a            Don't clone or pull arch repos"
-    echo "    -b            Don't clone or pull artix repos"
-    echo '    -i            Import a package from arch repos'
-    echo '    -n            New remote subrepo and clone it'
-    echo '    -v            Check if a package is in the artix tree(s)'
-    echo '    -c            View package depends'
-    echo '    -x            Exclude testing (only with -i)'
-    echo '    -y            Exclude staging (only with -i)'
-    echo '    -z            Include kde & gnome unstable (only with -i)'
-    echo '    -h            This help'
-    echo ''
-    echo ''
+    printf "Usage: %s [options]\n" "${0##*/}"
+    printf '    -p <pkg>      Package name\n'
+    printf '    -t <team>     Team name (only with -n)\n'
+    printf '                  Possible values: core,extra,community,multilib\n'
+    printf "                  [default: %s]\n" "${team}"
+    printf '    -g <group>    Group name, the superrepo (only with -n)\n'
+    printf "                  [default: %s]\n" "${group}"
+    printf "    -s            Clone or pull repos\n"
+    printf "    -a            Don't clone or pull arch repos\n"
+    printf "    -b            Don't clone or pull artix repos\n"
+    printf '    -i            Import a package from arch repos\n'
+    printf '    -n            New remote pkgrepo and add it\n'
+    printf '    -v            Check if a package is in the artix tree(s)\n'
+    printf '    -c            View package depends\n'
+    printf '    -x            Exclude testing (only with -i)\n'
+    printf '    -y            Exclude staging (only with -i)\n'
+    printf '    -z            Include kde & gnome unstable (only with -i)\n'
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -301,7 +291,7 @@ while getopts "${opts}" arg; do
     case "${arg}" in
         p) package="$OPTARG" ;;
         t) team="$OPTARG" ;;
-        g) group="$OPTARG"; sync_group=true ;;
+        g) group="$OPTARG" ;;
         s) sync=true ;;
         a) sync_arch=false ;;
         b) sync_artix=false ;;
@@ -313,7 +303,6 @@ while getopts "${opts}" arg; do
         y) staging=false ;;
         z) unstable=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 
@@ -329,4 +318,4 @@ ${check} && check_tree
 
 ${import} && from_arch
 
-${createnew} && subrepo_new
+${createnew} && pkgrepo_new

bin/pkg/checkpkg.in

@@ -197,7 +197,7 @@ for _pkgname in "${pkgname[@]}"; do
     if ! diff_output="$(sdiff -s "$TEMPDIR/libraries-$_pkgname-old" "$TEMPDIR/libraries-$_pkgname")"; then
         message="Sonames differ in $_pkgname!"
         (( WARN )) && warning "$message" || msg "$message"
-        echo "$diff_output"
+        printf "%s\n" "$diff_output"
     else
         msg "No soname differences for %s." "$_pkgname"
     fi

bin/pkg/checkrepo.in

@@ -129,14 +129,14 @@ show_obsolete_table() {
 
         if [[ "$p" != *openrc* ]] && [[ "$p" != *runit* ]] \
         && [[ "$p" != *s6* ]] && [[ "$p" != *suite66* ]] \
-        && [[ "$p" != *eudev* ]] && [[ "$p" != *elogind* ]] \
+        && [[ "$p" != *udev* ]] && [[ "$p" != *elogind* ]] \
         && [[ "$p" != *sysusers* ]] && [[ "$p" != *tmpfiles* ]] \
         && [[ "$p" != *execline* ]] && [[ "$p" != *skalibs* ]] \
         && [[ "$p" != *netifrc* ]] && [[ "$p" != *bootlogd* ]] \
         && [[ "$p" != *pam_rundir* ]] && [[ "$p" != *artools* ]] \
         && [[ "$p" != *archlinux* ]] && [[ "$p" != *iso-profiles* ]] \
         && [[ "$p" != *calamares* ]] && [[ "$p" != *iso-initcpio* ]] \
-        && [[ "$p" != *dinit* ]] && [[ "$p" != *artix* ]]; then
+        && [[ "$p" != *dinit* ]] && [[ "$p" != *artix* ]] && [[ "$p" != *blocaled* ]]; then
             if [[ ! -d "${arch_db}/$p" ]]; then
                 msg_row "${tableQ}" "${artix_repo}" "$p" "true"
             fi
@@ -209,17 +209,17 @@ searchrepos=(
 #}}}
 
 usage() {
-    echo "Usage: ${0##*/} [options] (with -q [libname])"
-    echo '    -r <repo>     Repo name to query'
-    echo '                  [default: all]'
-    echo "    -s            Sync repo databases"
-    echo '    -c            Check repos'
-    echo '    -a            Show repo db (-c)'
-    echo '    -o            Check for obsolete packages'
-    echo "    -q            Query repo databases for so libs"
-    echo '    -h            This help'
-    echo ''
-    echo ''
+    printf "Usage: %s [options] (with -q [libname])\n" "${0##*/}"
+    printf '    -r <repo>     Repo name to query\n'
+    printf '                  [default: all]\n'
+    printf "    -s            Sync repo databases\n"
+    printf '    -c            Check repos\n'
+    printf '    -a            Show repo db (-c)\n'
+    printf '    -o            Check for obsolete packages\n'
+    printf "    -q            Query repo databases for so libs\n"
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -234,7 +234,6 @@ while getopts "${opts}" arg; do
         q) query=true ;;
         o) obsolete=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/commitpkg.in

@@ -22,30 +22,6 @@ m4_include(lib/pkg/repo.sh)
 
 #{{{ functions
 
-push_tree(){
-    local tree="$1"
-    msg "Update (%s)" "${tree}"
-    git push origin master
-}
-
-subrepo_push(){
-    local pkg="$1"
-    msg2 "Subrepo push (%s)" "$pkg"
-    git subrepo push "$pkg" || die "%s push failed" "$pkg"
-}
-
-subrepo_clean(){
-    local pkg="$1"
-    msg2 "Subrepo clean (%s)" "$pkg"
-    git subrepo clean "$pkg"
-}
-
-subrepo_pull(){
-    local pkg="$1"
-    msg2 "Subrepo pull (%s)" "$pkg"
-    git subrepo pull "$pkg"
-}
-
 check_rebuild(){
     if [[ -d "$CARCH"/"${valid_names[10]}" ]] \
     && [[ "${repo_dest}" == "${valid_names[7]}" ]]; then
@@ -82,11 +58,11 @@ path_config() {
 }
 
 get_repo_commit_msg() {
-    echo "[${repo_src}] -> [${repo_dest}] '${package}-$(get_full_version)' ${action}"
+    printf "[%s] -> [%s] '%s' %s\n" "${repo_src}" "${repo_dest}" "${package}-$(get_full_version)" "${action}"
 }
 
 get_commit_msg() {
-    echo "[${repo_src}] '${package}-$(get_full_version)' ${action}"
+    printf "[%s] '%s' %s\n" "${repo_src}" "${package}-$(get_full_version)" "${action}"
 }
 
 commit_pkg() {
@@ -135,11 +111,11 @@ repo_commit_pkg() {
 }
 
 run(){
-    local artixpath head group
+    local artixpath head tree
     artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${package}")
     if [[ -n ${artixpath} ]];then
-        group=${artixpath%/*}
-        cd "${group}" || return
+        tree=${artixpath%/*}
+        cd "$tree" || return
         head=$(get_local_head)
 
         cd "${artixpath}" || return
@@ -152,18 +128,20 @@ run(){
             repo_commit_pkg
         fi
 
-        cd "${group}" || return
+        cd "$tree" || return
 
-        ${push} && pull_tree "${group##*/}" "$head"
-#         subrepo_pull "${package}"
-        subrepo_push "${package}"
-        subrepo_clean "${package}"
+        msg "Checking (%s) (Artix)" "${tree##*/}"
+        pull_tree "${tree##*/}" "$head"
 
-        ${push} && push_tree "${group##*/}"
-
-        git prune
-
-        [[ "${cmd}" != 'commitpkg' ]] && check_team
+        if braid push "${package}"; then
+            braid update "${package}"
+            msg "Update (%s)" "${tree##*/}"
+            git push origin master
+            git prune
+            [[ "${cmd}" != 'commitpkg' ]] && check_team
+        else
+            warning "'braid push %s' failed.\n" "${package}"
+        fi
     else
         die "Package '%s' does not exist!" "${package}"
     fi
@@ -189,7 +167,6 @@ load_valid_names
 repo_src='trunk'
 package=''
 remove=false
-push=false
 
 pkgbuild=trunk/PKGBUILD
 
@@ -197,27 +174,24 @@ cmd=${0##*/}
 repo_dest=${cmd%pkg}
 
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo "    -s <name>          Source repository [default:${repo_src}]"
-    echo '    -p <pkg>           Package name'
-    echo '    -r                 Delete from repo (commitpkg only)'
-    echo '    -u                 Push'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
+    printf "Usage: %s [options]\n" "${0##*/}"
+    printf "    -s <name>          Source repository [default: %s]\n" "${repo_src}"
+    printf '    -p <pkg>           Package name\n'
+    printf '    -r                 Delete from repo (commitpkg only)\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
-opts='p:s:urh'
+opts='p:s:rh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
         s) repo_src="$OPTARG" ;;
         p) package="$OPTARG" ;;
         r) remove=true ;;
-        u) push=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/comparepkg.in

@@ -31,23 +31,32 @@ write_list(){
     printf "%s\n" "$line" >> "${TREE_DIR_ARTIX}"/"$name".list
 }
 
+get_group() {
+    local group
+    group="${artixpath%/*}"
+    group=${group##*/}
+    printf "%s\n" "${group#*-}"
+}
+
 compare_m(){
-    case ${artixrepo} in
-        *testing*|*staging*|*rebuild)
-            if [[ "${a}" == "${b}" ]]; then
-                msg_row "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
-            elif [[ "${a}" == 'staging' && "${b}" == 'rebuild' ]]; then
-                msg_row_yellow "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
-            else
-                msg_row_green "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
-                if [[ -n "$archrepo" ]]; then
-                    write_list "${a}:${b}:$pkg" pkg_moves
+#     if [ "$result" -eq 0 ];then
+        case "$artixrepo" in
+            *testing*|*staging*|*rebuild)
+                if [[ "${archrepo}" == "${artixrepo}" ]]; then
+                    msg_row "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
+                elif [[ "${archrepo}" == 'staging' && "${artixrepo}" == 'rebuild' ]]; then
+                    msg_row_yellow "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
                 else
-                    write_list "@repo@:${b}:$pkg" artix
+                    msg_row_green "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
+                    if [[ -n "${archrepo}" ]]; then
+                        write_list "${archrepo}:${artixrepo}:$pkg" pkg_moves
+                    else
+                        write_list "@repo@:${artixrepo}:$pkg" artix
+                    fi
                 fi
-            fi
-        ;;
-    esac
+            ;;
+        esac
+#     fi
 }
 
 compare_u(){
@@ -55,15 +64,15 @@ compare_u(){
 #         local arel=${archver##*-} brel=${artixver##*-}
 #         local reldiff
 #         reldiff=$(( $arel-${brel%.*} ))
-        msg_row_red "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
-        write_list "${a}:$pkg" pkg_upgrades
+        msg_row_red "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
+        write_list "${archrepo}:$pkg" pkg_upgrades
     fi
 }
 
 compare_d(){
     if [ "$result" -eq 1 ];then
-        if [[ -n "$archver" ]] && [[ -n "$archrepo" ]];then
-            msg_row_yellow "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
+        if [[ -n "$archver" ]] && [[ -n "${archrepo}" ]];then
+            msg_row_yellow "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
         fi
     fi
 }
@@ -74,31 +83,26 @@ get_archpath(){
     for tree in "${ARCH_TREE[@]}"; do
         [[ -d ${TREE_DIR_ARCH}/$tree/$pkg/repos ]] && archpath=${TREE_DIR_ARCH}/$tree/$pkg
     done
-    echo "$archpath"
+    printf "%s\n" "$archpath"
 }
 
 pre_compare(){
-    local func="$1" pkgpath="$2" result group pkg
-    group="${pkgpath%/*}"
-    group=${group##*/}
-    pkg=${pkgpath##*/}
+    local artixpath="$1" func="$2" pkg
+    pkg=${artixpath##*/}
 
-    local artixrepo archrepo pkgbuild artixver archver archpath node a b
-    artixrepo=$(find_repo "$pkgpath")
-    pkgbuild=$pkgpath/$artixrepo/PKGBUILD
+    local artixrepo archrepo pkgbuild artixver archver archpath epoch
 
-    if [[ -f $pkgbuild ]]; then
+    artixrepo=$(find_repo "$artixpath")
+    pkgbuild=$artixpath/$CARCH/$artixrepo/PKGBUILD
+
+    if [[ -f "$pkgbuild" ]]; then
         # shellcheck disable=1090
         . "$pkgbuild" 2>/dev/null
         artixver=$(get_full_version)
         archpath=$(get_archpath "$pkg")
-        archrepo=$(find_repo "${archpath}")
-        pkgbuild=$archpath/$archrepo/PKGBUILD
-        node=${artixrepo%/*}
-        a=${archrepo#*/} b=${artixrepo#*/}
-        a="${a%-*}"
-
-        [[ "$node" != "$CARCH" ]] && b=${b%-*}
+        archrepo=$(find_repo "$archpath")
+        pkgbuild=$archpath/repos/$archrepo/PKGBUILD
+        archrepo="${archrepo%-*}"
 
         if [[ -f "$pkgbuild" ]]; then
             # shellcheck disable=1090
@@ -106,27 +110,26 @@ pre_compare(){
             archver=$(get_full_version)
         fi
 
+        local result
         result=$(vercmp "$artixver" "$archver")
 
         "$func"
-
-        unset epoch
     fi
 }
 
 compare_upgrades(){
-    local pkgpath="${1%/*}"
-    pre_compare compare_u "$pkgpath"
+    local artixpath="${1%/*}"
+    pre_compare "$artixpath" compare_u
 }
 
 compare_downgrades(){
-    local pkgpath="${1%/*}"
-    pre_compare compare_d "$pkgpath"
+    local artixpath="${1%/*}"
+    pre_compare "$artixpath" compare_d
 }
 
 compare_move(){
-    local pkgpath="${1%/*}"
-    pre_compare compare_m "$pkgpath"
+    local artixpath="${1%/*}"
+    pre_compare "$artixpath" compare_m
 }
 
 #}}}
@@ -165,19 +168,19 @@ upgrades=false
 downgrades=false
 move=false
 
-readonly table="%-18s %-18s %-25s %-27s %-27s %-10s"
+readonly table="%-18s %-18s %-29s %-27s %-27s %-7s"
 
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo '    -u            Show upgrade packages'
-    echo '    -d            Show downgrade packages'
-    echo '    -m            Show packages to move'
-    echo "    -x            Don't inlcude testing packages"
-    echo "    -y            Don't inlcude staging packages"
-    echo '    -z            Include unstable kde and gnome'
-    echo '    -h            This help'
-    echo ''
-    echo ''
+    printf 'Usage: %s [options]\n' "${0##*/}"
+    printf '    -u            Show upgrade packages\n'
+    printf '    -d            Show downgrade packages\n'
+    printf '    -m            Show packages to move\n'
+    printf '    -x            Do not inlcude testing packages\n'
+    printf '    -y            Do not inlcude staging packages\n'
+    printf '    -z            Include unstable kde and gnome\n'
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -192,7 +195,6 @@ while getopts "${opts}" arg; do
         y) staging=false ;;
         z) unstable=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/deploypkg.in

@@ -61,14 +61,14 @@ cmd=${0##*/}
 dest_repo=${cmd#*-}
 
 usage() {
-    echo "Usage: ${cmd} [options]"
-    echo '    -d <dest>          Destination repository'
-    echo '    -a                 Add package(s) to repository'
-    echo '    -r                 Remove package(s) from repository'
-    echo '    -l                 Use links db'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
+    printf "Usage: %s [options]\n" "${cmd}"
+    printf '    -d <dest>          Destination repository\n'
+    printf '    -a                 Add package(s) to repository\n'
+    printf '    -r                 Remove package(s) from repository\n'
+    printf '    -l                 Use links db\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -81,7 +81,6 @@ while getopts "${opts}" arg; do
         r) rm_pkg=true; add_pkg=false ;;
         l) linksdb=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/find-libdeps.in

@@ -32,9 +32,9 @@ case $script_mode in
 esac
 
 if [[ -z $1 ]]; then
-    echo "${0##*/} [options] <package file|extracted package dir>"
-    echo "Options:"
-    echo "    --ignore-internal      ignore internal libraries"
+    printf "%s [options] <package file|extracted package dir>\n" "${0##*/}"
+    printf "Options:\n"
+    printf "    --ignore-internal      ignore internal libraries\n"
     exit 1
 fi
 
@@ -61,7 +61,7 @@ process_sofile() {
     fi
     if ! in_array "${soname}=${soversion}-${soarch}" "${soobjects[@]}"; then
         # libfoo.so=1-64
-        echo "${soname}=${soversion}-${soarch}"
+        printf "%s\n" "${soname}=${soversion}-${soarch}"
         soobjects+=("${soname}=${soversion}-${soarch}")
     fi
 }

bin/pkg/finddeps.in

@@ -17,11 +17,11 @@ m4_include(lib/base/message.sh)
 match=$1
 
 if [[ -z $match ]]; then
-    echo 'Usage: finddeps <depname>'
-    echo ''
-    echo 'Find packages that depend on a given depname.'
-    echo 'Run this script from the top-level directory of your ABS tree.'
-    echo ''
+    printf 'Usage: finddeps <depname>\n'
+    printf '\n'
+    printf 'Find packages that depend on a given depname.\n'
+    printf 'Run this script from the top-level directory of your ABS tree.\n'
+    printf '\n'
     exit 1
 fi
 

bin/pkg/gitearepo.in

@@ -55,13 +55,13 @@ transfer_repo() {
 #}}}
 
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo '    -r <repo>     Repo name'
-    echo '    -c            Create git repo'
-    echo '    -t            Transfer git repo to landfill org'
-    echo '    -h            This help'
-    echo ''
-    echo ''
+    printf "Usage: %s [options]\n" "${0##*/}"
+    printf '    -r <repo>     Repo name\n'
+    printf '    -c            Create git repo\n'
+    printf '    -t            Transfer git repo to landfill org\n'
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -76,7 +76,6 @@ while getopts "${opts}" arg; do
         c) create=true ;;
         t) transfer=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/lddd.in

@@ -40,7 +40,7 @@ for tree in $PATH $libdirs $extras; do
             #  Is an ELF binary.
             if (( $(ldd "$i" 2>/dev/null | grep -c 'not found') != 0 )); then
                 #  Missing lib.
-                echo "$i:" >> "$TEMPDIR/raw.txt"
+                printf "%s\n" "$i:" >> "$TEMPDIR/raw.txt"
                 ldd "$i" 2>/dev/null | grep 'not found' >> "$TEMPDIR/raw.txt"
             fi
         fi

bin/pkg/links-add.in

@@ -87,7 +87,7 @@ find_pkgentry() {
     for pkgentry in "$tmpdir/${REPO_DB_NAME}/$pkgname"*; do
         name=${pkgentry##*/}
         if [[ ${name%-*-*} = "$pkgname" ]]; then
-            echo "$pkgentry"
+            printf "%s\n" "$pkgentry"
             return 0
         fi
     done
@@ -238,7 +238,7 @@ db_remove_entry() {
 
         # remove entries in "links" database
         local linksentry
-        linksentry=$(echo "$pkgentry" | sed 's/\(.*\)\/db\//\1\/links\//')
+        linksentry=$(printf "%s\n" "$pkgentry" | sed 's/\(.*\)\/db\//\1\/links\//')
         rm -rf "$linksentry"
 
         pkgentry=$(find_pkgentry "$pkgname")
@@ -258,7 +258,7 @@ prepare_repo_db() {
     fi
 
     # check lock file
-    if ( set -o noclobber; echo "$$" > "$LOCKFILE") 2> /dev/null; then
+    if ( set -o noclobber; printf "%s\n" "$$" > "$LOCKFILE") 2> /dev/null; then
         CLEAN_LOCK=1
     else
         error "Failed to acquire lockfile: %s." "$LOCKFILE"
@@ -399,7 +399,7 @@ trap_exit() {
     # unhook all traps to avoid race conditions
     trap '' EXIT TERM HUP QUIT INT ERR
 
-    echo
+    printf '\n'
     error "$@"
     clean_up 1
 }

bin/pkg/mkchrootpkg.in

@@ -44,43 +44,43 @@ copy=$USER
 src_owner=${SUDO_USER:-$USER}
 
 usage() {
-    echo "Usage: ${0##*/} [options] -r <chrootdir> [--] [makepkg args]"
-    echo ' Run this script in a PKGBUILD dir to build a package inside a'
-    echo ' clean chroot. Arguments passed to this script after the'
-    echo ' end-of-options marker (--) will be passed to makepkg.'
-    echo ''
-    echo ' The chroot dir consists of the following directories:'
-    echo ' <chrootdir>/{root, copy} but only "root" is required'
-    echo ' by default. The working copy will be created as needed'
-    echo ''
-    echo 'The chroot "root" directory must be created via the following'
-    echo 'command:'
-    echo '    mkchroot <chrootdir>/root base-devel'
-    echo ''
-    echo 'This script reads {SRC,SRCPKG,PKG,LOG}DEST, MAKEFLAGS and PACKAGER'
-    echo 'from makepkg.conf(5), if those variables are not part of the'
-    echo 'environment.'
-    echo ''
-    echo "Default makepkg args: ${default_makepkg_args[*]}"
-    echo ''
-    echo 'Flags:'
-    echo '-h         This help'
-    echo '-c         Clean the chroot before building'
-    echo '-d <dir>   Bind directory into build chroot as read-write'
-    echo '-D <dir>   Bind directory into build chroot as read-only'
-    echo '-u         Update the working copy of the chroot before building'
-    echo '           This is useful for rebuilds without dirtying the pristine'
-    echo '           chroot'
-    echo '-r <dir>   The chroot dir to use'
-    echo '-I <pkg>   Install a package into the working copy of the chroot'
-    echo '-l <copy>  The directory to use as the working copy of the chroot'
-    echo '           Useful for maintaining multiple copies'
-    echo "           Default: $copy"
-    echo '-n         Run namcap on the package'
-    echo '-C         Run checkpkg on the package'
-    echo '-N         Disable check() function'
-    echo '-T         Build in a temporary directory'
-    echo '-U         Run makepkg as a specified user'
+    printf 'Usage: %s [options] -r <chrootdir> [--] [makepkg args]\n' "${0##*/}"
+    printf ' Run this script in a PKGBUILD dir to build a package inside a\n'
+    printf ' clean chroot. Arguments passed to this script after the\n'
+    printf ' end-of-options marker (--) will be passed to makepkg.\n'
+    printf '\n'
+    printf ' The chroot dir consists of the following directories:\n'
+    printf ' <chrootdir>/{root, copy} but only "root" is required\n'
+    printf ' by default. The working copy will be created as needed\n'
+    printf '\n'
+    printf "The chroot 'root' directory must be created via the following\n"
+    printf 'command:\n'
+    printf '    mkchroot <chrootdir>/root base-devel\n'
+    printf '\n'
+    printf 'This script reads {SRC,SRCPKG,PKG,LOG}DEST, MAKEFLAGS and PACKAGER\n'
+    printf 'from makepkg.conf(5), if those variables are not part of the\n'
+    printf 'environment.\n'
+    printf '\n'
+    printf 'Default makepkg args: %s\n' "${default_makepkg_args[*]}"
+    printf '\n'
+    printf 'Flags:\n'
+    printf ' -h         This help\n'
+    printf ' -c         Clean the chroot before building\n'
+    printf ' -d <dir>   Bind directory into build chroot as read-write\n'
+    printf ' -D <dir>   Bind directory into build chroot as read-only\n'
+    printf ' -u         Update the working copy of the chroot before building\n'
+    printf '           This is useful for rebuilds without dirtying the pristine\n'
+    printf '           chroot\n'
+    printf ' -r <dir>   The chroot dir to use\n'
+    printf ' -I <pkg>   Install a package into the working copy of the chroot\n'
+    printf ' -l <copy>  The directory to use as the working copy of the chroot\n'
+    printf '            Useful for maintaining multiple copies\n'
+    printf '            Default: %s\n' "$copy"
+    printf ' -n         Run namcap on the package\n'
+    printf ' -C         Run checkpkg on the package\n'
+    printf ' -N         Disable check() function\n'
+    printf ' -T         Build in a temporary directory\n'
+    printf ' -U         Run makepkg as a specified user\n'
     exit 1
 }
 
@@ -182,7 +182,7 @@ prepare_chroot() {
         "MAKEFLAGS='${MAKEFLAGS:-}'" "PACKAGER='${PACKAGER:-}'"
     do
         grep -q "^$x" "$copydir/etc/makepkg.conf" && continue
-        echo "$x" >>"$copydir/etc/makepkg.conf"
+        printf "%s\n" "$x" >>"$copydir/etc/makepkg.conf"
     done
 
     cat > "$copydir/etc/sudoers.d/builduser-pacman" <<EOF
@@ -239,7 +239,7 @@ _chrootbuild() {
 _chrootnamcap() {
     pacman -S --needed --noconfirm namcap
     for pkgfile in /startdir/PKGBUILD /pkgdest/*; do
-        echo "Checking ${pkgfile##*/}"
+        printf "Checking %s\n" "${pkgfile##*/}"
         sudo -u builduser namcap "$pkgfile" 2>&1 | tee "/logdest/${pkgfile##*/}-namcap.log"
     done
 }

bin/pkg/mkdepgraph.in

@@ -0,0 +1,77 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-19 artoo@artixlinux.org
+# Copyright (C) 2018 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+mk_tree_graph(){
+    printf "%s\n" "$(pactree "${tree_args[@]}" "${package}")" \
+        | dot -T "${ext}" > "${graph_dir}/${package}.${ext}"
+}
+
+mk_rebuild_graph(){
+    local tmpfile
+    tmpfile=/tmp/rebuild.dot
+    rebuild_args+=(-d "${tmpfile}")
+    artix-rebuild-order "${packages[@]}" "${rebuild_args[@]}"
+    dot -T "${ext}" "${tmpfile}" > "${graph_dir}/rebuild.${ext}"
+    rm -f "${tmpfile}"
+}
+
+usage() {
+    printf "Usage: %s [options] <package|packages>\n" "${0##*/}"
+    printf "    -m <tree|rebuild>    default mode: [%s]\n" "$mode"
+    printf "                         rebuild mode accepts packages input\n"
+    printf "    -r                   list packages that depend on the named package (tree)\n"
+    printf "    -u                   show dependencies with no duplicates  (tree)\n"
+    printf "    -d <#>               limit the depth of recursion  (tree)\n"
+    printf "                         default: [%s]\n" "$depth"
+    printf "    -o <#>               controls at which depth to stop printing optional deps\n"
+    printf "                         default: [%s]\n" "$optdepth"
+    printf "                         (-1 for no limit)  (tree)\n"
+    printf "    -i                   only use the pkgnames provided as input (rebuild)\n"
+    printf "    -h                   display this help message\n"
+    exit "$1"
+}
+
+graph_dir=${XDG_PICTURES_DIR:-$(xdg-user-dir PICTURES)/artix}
+ext="png"
+
+mode=tree
+
+tree_args=(-gs)
+rebuild_args=()
+
+depth=0
+optdepth=-1
+
+opts=':m:d:o:iruh'
+
+while getopts "$opts" arg; do
+    case "${arg}" in
+        m) mode="$OPTARG" ;;
+        r) tree_args+=(-r) ;;
+        u) tree_args+=(-ul) ;;
+        d) depth="$OPTARG"; tree_args+=(-d "$depth") ;;
+        o) optdepth="$OPTARG"; tree_args+=(-o"$optdepth") ;;
+        i) rebuild_args+=(--no-reverse-depends) ;;
+        h|?) usage 0 ;;
+    esac
+done
+shift $(( OPTIND - 1 ))
+
+[[ -d "${graph_dir}" ]] || mkdir -p "${graph_dir}"
+
+case "$mode" in
+    tree) package=("$@"); mk_tree_graph ;;
+    rebuild) packages=("$@"); mk_rebuild_graph ;;
+    *) usage 1 ;;
+esac

bin/pkg/pkg2yaml.in

@@ -146,16 +146,16 @@ write_srcyaml(){
     yaml_write_global
     yaml_write_package
     yaml_write_fileinfo
-    printf '%s' "${Yaml}"
+    printf '%s\n' "${Yaml}"
 }
 
 #}}}
 
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo "    -d            Don't include details"
-    echo '    -h            This help'
-    echo ''
+    printf 'Usage: %s [options]\n' "${0##*/}"
+    printf '    -d            Do not include details\n'
+    printf '    -h            This help\n'
+    printf '\n'
     exit "$1"
 }
 
@@ -167,7 +167,6 @@ while getopts "${opts}" arg; do
     case "${arg}" in
         d) details=false ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 

bin/pkg/tidyarch.in

@@ -0,0 +1,202 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-20 artoo@artixlinux.org
+# Copyright (C) 2018 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/repo.sh)
+
+git_rm() {
+    local r="$1"
+    if ! "$run_f"; then
+        printf "git rm -r %s\n" "$r"
+        printf "git commit -m 'remove %s'\n" "${r##*/}"
+    else
+        git rm -r  "$r"
+        git commit -m "remove ${r##*/}"
+    fi
+}
+
+compare_ver() {
+    local a="$1" b="$2" tree="$3" func="$4" va vb
+    # shellcheck disable=1090
+    source "$a"/PKGBUILD 2>/dev/null
+    va=$(get_full_version)
+    unset pkgver epoch pkgrel arch
+    # shellcheck disable=1090
+    source "$b"/PKGBUILD 2>/dev/null
+    vb=$(get_full_version)
+    unset pkgver epoch pkgrel arch
+    msg2 "a: %s b: %s" "$va" "$vb"
+    local ret
+    ret=$(vercmp "$va" "$vb")
+    msg2 "ret: %s" "$ret"
+    if [ "$ret" -gt 0 ]; then
+        git_rm "$b"
+    elif [ "$ret" -lt 0 ]; then
+        git_rm "$a"
+    else
+        case "$tree" in
+            "${ARCH_TREE[0]}") git_rm "$a" ;;
+            "${ARCH_TREE[1]}") git_rm "$b" ;;
+        esac
+    fi
+}
+
+check_duplicates() {
+    mapfile -t duplicates < <(find "${TREE_DIR_ARCH}" -mindepth 2 -maxdepth 2 -type d -not -path "*.git" -printf '%f\n' | sort | uniq -d)
+
+    for p in "${duplicates[@]}"; do
+        msg "%s" "$p"
+        local av bv a b
+
+        a="${TREE_DIR_ARCH}/${ARCH_TREE[0]}"
+        # shellcheck disable=1090
+        source "$a/$p"/trunk/PKGBUILD 2>/dev/null
+        av=$(get_full_version)
+
+        b="${TREE_DIR_ARCH}/${ARCH_TREE[1]}"
+        # shellcheck disable=1090
+        source "$b/$p"/trunk/PKGBUILD 2>/dev/null
+        bv=$(get_full_version)
+
+        msg2 "a: %s b: %s" "$av" "$bv"
+        ret=$(vercmp "$av" "$bv")
+        msg2 "ret: %s" "$ret"
+
+        if [ "$ret" -gt 0 ]; then
+            cd "$b"
+            msg2 "%s" "${b##*/}"
+            git_rm "$p"
+        elif [ "$ret" -lt 0 ]; then
+            cd "$a"
+            msg2 "%s" "${a##*/}"
+            git_rm "$p"
+        fi
+    done
+}
+# git config core.mergeoptions --no-edit
+check_tree() {
+    for tree in "${ARCH_TREE[@]}"; do
+        cd "${TREE_DIR_ARCH}/$tree" || exit
+
+        mapfile -t pkgs < <(find . -mindepth 2 -maxdepth 2 -type d -name repos | sort)
+
+        for p in "${pkgs[@]}"; do
+
+            mapfile -t repos < <(find "$p" -mindepth 1 -maxdepth 1 -type d -printf '%f\n' | sort)
+
+            local repos_dir=$p
+            p=${p%/*}
+            p=${p##*/}
+            local size=${#repos[@]}
+
+            if (( "$size" > 1 )); then
+                if [[ "${repos[1]}" != "${valid_names[11]}"-* ]] || [[ "${repos[1]}" != "${valid_names[12]}"-* ]]; then
+
+                    local a="$repos_dir/${repos[0]}" b="$repos_dir/${repos[1]}"
+
+                    # repo mismatches
+                    if [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[1]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[7]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[4]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[0]}"-* ]] && [[ "${repos[1]}" == "${valid_names[1]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[0]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[3]}"-* ]] && [[ "${repos[1]}" == "${valid_names[7]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[3]}"-* ]] && [[ "${repos[1]}" == "${valid_names[4]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+                    fi
+
+                    # same repo name but different arch
+                    if [[ "${repos[0]}" == "${valid_names[0]}"-any ]] && [[ "${repos[1]}" == "${valid_names[0]}"-"$CARCH" ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[1]}"-any ]] && [[ "${repos[1]}" == "${valid_names[1]}"-"$CARCH" ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-any ]] && [[ "${repos[1]}" == "${valid_names[2]}"-"$CARCH" ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+                    fi
+                fi
+            fi
+        done
+    done
+}
+
+usage() {
+    printf 'Usage: %s\n' "${0##*/}"
+    printf '    -f                 Apply filter\n'
+    printf '    -r                 Run removal\n'
+    printf '    -d                 Check for duplicates\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
+}
+
+load_makepkg_config
+
+load_valid_names
+
+filter=false
+dupl=false
+run_f=false
+
+opts='hrfd'
+
+while getopts ${opts} arg; do
+    case "${arg}" in
+        f) filter=true ;;
+        r) run_f=true ;;
+        d) dupl=true ;;
+        h|?) usage 0 ;;
+    esac
+done
+shift $(( OPTIND - 1 ))
+
+"$filter" && check_tree
+
+"$dupl" && check_duplicates

data/conf/artools-pkg.conf

@@ -7,41 +7,13 @@
 
 # TREE_DIR_ARTIX=${WORKSPACE_DIR}/artixlinux
 
-# customize buildtree; uncomment to include
-# TREE_NAMES_ARTIX=(
-#         packages-kernel
-#         packages-llvm
-#         packages-openrc
-#         packages-runit
-#         packages-s6
-#         packages-suite66
-#         packages-dinit
-#         packages-perl
-#         packages-java
-#         packages-ruby
-#         packages-gtk
-#         packages-qt5
-#         packages-qt6
-#         packages-xorg
-#         packages-plasma
-#         packages-kde
-#         packages-gnome
-#         packages-cinnamon
-#         packages-lxqt
-#         packages-lxde
-#         packages-mate
-#         packages-xfce
-#         packages-wm
-#         packages-devel
-#         packages-qt6
-#         packages-office
-#         packages-misc
-#         python-world
-#         python-galaxy
-#         python-galaxy-groups
-#         python-misc
-#         packages-python
-#         packages-lib32
+# customize buildtree
+# ARTIX_TREE=(
+#     main
+#     initsys
+#     desktop
+#     addons
+#     lib32
 # )
 
 # TREE_DIR_ARCH=${WORKSPACE_DIR}/archlinux

data/pacman/makepkg.conf

@@ -45,12 +45,13 @@ CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions \
         -fstack-clash-protection -fcf-protection"
 CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
 LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
+LTOFLAGS="-flto=auto"
 #RUSTFLAGS="-C opt-level=2"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 #-- Debugging flags
 DEBUG_CFLAGS="-g"
-DEBUG_CXXFLAGS="-g"
+DEBUG_CXXFLAGS="$DEBUG_CFLAGS"
 #DEBUG_RUSTFLAGS="-C debuginfo=2"
 
 #########################################################################

lib/base/yaml.sh

@@ -3,11 +3,11 @@
 #{{{ yaml
 
 write_yaml_header(){
-    printf '%s' '---'
+    printf '%s\n' '---'
 }
 
 write_empty_line(){
-    printf '\n%s\n' ' '
+    printf '\n'
 }
 
 write_yaml_map(){

lib/iso/calamares.sh

@@ -13,7 +13,7 @@ write_services_conf(){
         yaml+=$(write_yaml_seq 2 "$svc")
     done
     yaml+=$(write_empty_line)
-    printf '%s' "${yaml}"
+    printf '%s\n' "${yaml}"
 }
 
 write_services_openrc_conf(){
@@ -29,6 +29,7 @@ write_services_runit_conf(){
 write_services_s6_conf(){
     local conf="$1"/services-s6.conf
     write_services_conf 'svDir' '/etc/s6/sv' 'dbDir' '/etc/s6/rc/compiled' > "$conf"
+    printf '%s\n' "defaultBundle: default" >> "$conf"
 }
 
 write_services_suite66_conf(){

lib/iso/iso.sh

@@ -5,13 +5,13 @@
 get_disturl(){
     # shellcheck disable=1091
     . /usr/lib/os-release
-    echo "${HOME_URL}"
+    printf "%s\n" "${HOME_URL}"
 }
 
 get_osname(){
     # shellcheck disable=1091
     . /usr/lib/os-release
-    echo "${NAME}"
+    printf "%s\n" "${NAME}"
 }
 
 assemble_iso(){

lib/iso/profile.sh

@@ -56,7 +56,8 @@ read_from_list() {
 read_from_services() {
     for svc in "${SERVICES[@]}"; do
         case "$svc" in
-            sddm|gdm|lightdm|mdm|greetd|lxdm|xdm) packages+=("$svc-${INITSYS}") ;;
+            sddm|gdm|lightdm|mdm|greetd|lxdm|xdm)
+                packages+=("$svc-${INITSYS}"); display_manager="$svc" ;;
             NetworkManager) packages+=("networkmanager-${INITSYS}") ;;
             connmand) packages+=("connman-${INITSYS}") ;;
             cupsd) packages+=("cups-${INITSYS}") ;;

lib/iso/services.sh

@@ -23,25 +23,26 @@ add_svc_runit(){
 }
 
 add_svc_s6(){
-    local mnt="$1" names="$2" rlvl="${3:-default}" error ret
-    local db=/etc/s6/rc/compiled
+    local mnt="$1" names="$2" rlvl="${3:-default}" dep
+    dep="$mnt"/etc/s6/sv/"$display_manager"-srv/dependencies.d
     for svc in $names; do
-        error=false
-        chroot "$mnt" s6-rc-db -c "$db" type "$svc" &> /dev/null || error=true
-        ret="$?"
-        if [ $ret -eq 0 ] && [[ "$error" == false ]]; then
-            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
-            chroot "$mnt" touch /etc/s6/adminsv/default/contents.d/"$svc"
+        msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+        chroot "$mnt" s6-service add "$rlvl" "$svc"
+        if [[ "$svc" == "$display_manager" ]]; then
+            if [[ -d "$dep" ]]; then
+                touch "$dep"/artix-live
+            fi
         fi
     done
-    chroot "$mnt" s6-db-reload
 
-    local rlvl=/etc/s6/current
+    chroot "$mnt" s6-db-reload -r
+
+    local src=/etc/s6/current skel=/etc/s6/skel getty='/usr/bin/agetty -L -8 tty7 115200'
     # rebuild s6-linux-init binaries
-    chroot "$mnt" rm -r "$rlvl"
-    chroot "$mnt" s6-linux-init-maker -1 -N -f /etc/s6/skel -G "/usr/bin/agetty -L -8 tty7 115200" -c "$rlvl" "$rlvl"
-    chroot "$mnt" mv "$rlvl"/bin/init "$rlvl"/bin/s6-init
-    chroot "$mnt" cp -a "$rlvl"/bin /usr
+    chroot "$mnt" rm -r "$src"
+    chroot "$mnt" s6-linux-init-maker -1 -N -f "$skel" -G "$getty" -c "$src" "$src"
+    chroot "$mnt" mv "$src"/bin/init "$src"/bin/s6-init
+    chroot "$mnt" cp -a "$src"/bin /usr
 }
 
 add_svc_suite66(){

lib/pkg/common.sh

@@ -5,9 +5,10 @@
 get_compliant_name(){
     local gitname="$1"
     case "$gitname" in
-        *+) gitname=${gitname//+/plus}
+        *+) gitname=${gitname//+/plus} ;;
+        *+*) gitname=${gitname//+/-} ;;
     esac
-    echo "$gitname"
+    printf "%s\n" "$gitname"
 }
 
 get_pkg_org(){
@@ -18,7 +19,7 @@ get_pkg_org(){
         python-*|python2-*) org="packagesPython" ;;
         *) sub=${pkg:0:1}; org="packages${sub^^}" ;;
     esac
-    echo "$org"
+    printf "%s\n" "$org"
 }
 
 api_put() {

lib/pkg/deploy.sh

@@ -31,7 +31,7 @@ get_pkgbasename() {
     rm_pkg=${rm_pkg%-*}
     rm_pkg=${rm_pkg%-*}
     rm_pkg=${rm_pkg%-*}
-    echo "$rm_pkg"
+    printf "%s\n" "$rm_pkg"
 }
 
 #}}}

lib/pkg/git.sh

@@ -22,12 +22,9 @@ has_changeset(){
 }
 
 pull_tree(){
-    local tree="$1" local_head="$2" os="${3:-Artix}"
-    local remote_head
-    remote_head=$(get_remote_head)
-
-    msg "Checking (%s) (%s)" "${tree}" "$os"
-    if has_changeset "${local_head}" "${remote_head}";then
+    local tree="$1" lh="$2" rh
+    rh=$(get_remote_head)
+    if has_changeset "${lh}" "${rh}";then
         git pull origin master
     fi
 }

lib/pkg/jenkins.sh

@@ -6,11 +6,11 @@ write_jenkinsfile(){
     local pkg="$1"
     local jenkins=$pkg/Jenkinsfile
 
-    echo "@Library('artix-ci') import org.artixlinux.RepoPackage" > "$jenkins"
+    printf "@Library('artix-ci') import org.artixlinux.RepoPackage\n" > "$jenkins"
     {
-    echo ''
-    echo 'PackagePipeline(new RepoPackage(this))'
-    echo ''
+    printf '\n'
+    printf 'PackagePipeline(new RepoPackage(this))\n'
+    printf '\n'
     } >> "$jenkins"
 
     git add "$jenkins"
@@ -21,11 +21,11 @@ write_agentyaml(){
     local agent="$pkg"/.artixlinux/agent.yaml label='master'
     [[ -d $pkg/.artixlinux ]] || mkdir "$pkg"/.artixlinux
 
-    echo '---' > "$agent"
+    printf '%s\n' '---' > "$agent"
     {
-    echo ''
-    echo "label: $label"
-    echo ''
+    printf '\n'
+    printf "label: %s\n" "$label"
+    printf '\n'
     } >> "$agent"
 
     git add "$agent"
@@ -37,7 +37,7 @@ commit_jenkins_files(){
     write_jenkinsfile "$pkg"
     write_agentyaml "$pkg"
 
-    git commit -m "initial commit"
+    git commit -m "initial ci commit"
 }
 
 #}}}

lib/pkg/repo.sh

@@ -25,25 +25,25 @@ set_arch_repos(){
 find_repo(){
     local pkg="$1" pkgarch="${2:-${CARCH}}" repo
     for r in "${ARCH_REPOS[@]}"; do
-        [[ -f $pkg/repos/$r-$pkgarch/PKGBUILD ]] && repo=repos/"$r-$pkgarch"
-        [[ -f $pkg/repos/$r-any/PKGBUILD ]] && repo=repos/"$r"-any
-        [[ -f $pkg/$pkgarch/$r/PKGBUILD ]] && repo="$pkgarch/$r"
+        [[ -f $pkg/repos/$r-$pkgarch/PKGBUILD ]] && repo="$r-$pkgarch"
+        [[ -f $pkg/repos/$r-any/PKGBUILD ]] && repo="$r"-any
+        [[ -f $pkg/$pkgarch/$r/PKGBUILD ]] && repo="$r"
     done
-    echo "$repo"
+    printf "%s\n" "$repo"
 }
 
 find_pkg(){
     local searchdir="$1" pkg="$2" result
     result=$(find "$searchdir" -mindepth 2 -maxdepth 2 -type d -name "$pkg")
-    echo "$result"
+    printf "%s\n" "$result"
 }
 
 tree_loop(){
     local func="$1" pkgs
     for tree in "${ARTIX_TREE[@]}"; do
-        pkgs=$(find "${TREE_DIR_ARTIX}/$tree" -name "$CARCH" | sort)
-        for _package in ${pkgs}; do
-            "$func" "$_package"
+        mapfile -t pkgs < <(find "${TREE_DIR_ARTIX}/$tree" -name "$CARCH" | sort)
+        for p in "${pkgs[@]}"; do
+            "$func" "$p"
         done
     done
 }

lib/util-pkg.sh

@@ -21,34 +21,8 @@ load_pkg_config(){
 
     TREE_DIR_ARTIX=${TREE_DIR_ARTIX:-"${WORKSPACE_DIR}/artixlinux"}
 
-    ARTIX_TREE=(
-        packages community
-        packages-{gfx,media,net}
-    )
-
-    local dev_tree=(
-        packages-{llvm,python,perl,java,ruby,misc}
-        python-{world,galaxy,galaxy-groups,misc}
-    )
-
-    local init_tree=(packages-{openrc,runit,s6,suite66,dinit})
-
-    local desktop_tree=(
-        packages-{kf5,plasma,kde,qt5,qt6,xorg,gtk}
-        packages-{lxqt,gnome,cinnamon,mate,xfce,wm,lxde}
-    )
-
-    [[ -z ${TREE_NAMES_ARTIX[*]} ]] && \
-    TREE_NAMES_ARTIX=(
-        packages-kernel
-        "${init_tree[@]}"
-        "${dev_tree[@]}"
-        "${desktop_tree[@]}"
-        packages-devel
-        packages-lib32
-    )
-
-    ARTIX_TREE+=("${TREE_NAMES_ARTIX[@]}")
+    [[ -z ${ARTIX_TREE[*]} ]] && \
+    ARTIX_TREE=(main initsys desktop addons lib32)
 
     TREE_DIR_ARCH=${TREE_DIR_ARCH:-"${WORKSPACE_DIR}/archlinux"}