0.11.2

Reviewed-on: artix/live-services#9

LICENSE

@@ -1,6 +1,6 @@
 BSD 2-Clause License
 
-Copyright (c) 2017, Cromnix GNU/Linux
+Copyright (c) 2018-2021, Artix Linux
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without

Makefile

@@ -1,13 +1,23 @@
-Version=0.1
+VERSION = 0.11.2
+
+PKG = live-services
+TOOLS = artools
 
-PREFIX = /usr/local
 SYSCONFDIR = /etc
+PREFIX ?= /usr
+BINDIR = $(PREFIX)/bin
+LIBDIR = $(PREFIX)/lib
+DATADIR = $(PREFIX)/share
+SYSUSERSDIR = $(PREFIX)/lib/sysusers.d
+LIVEUSER ?= artix
+
+FMODE = -m0644
+DMODE = -dm0755
+BMODE = -m0755
 
 BIN = \
 	bin/artix-live
 
-LIBS = $(wildcard lib/*.sh)
-
 SHARED = \
 	$(wildcard data/*.map) \
 	data/live.conf
@@ -17,67 +27,111 @@ RC = \
 	data/rc/pacman-init \
 	data/rc/artix-live
 
-GRUB_DEFAULT = \
-	data/grub2-portable-efi
+RUNIT_SVD = \
+	data/runit/live
 
-GRUB_D = \
-	data/99_zzz-portable-efi
+RUNIT_SV = \
+	data/runit/pacman-init.run
 
-all: $(BIN) $(RC) $(XBIN) ${GRUB_D}
+S6_LIVE = \
+	data/s6/artix-live/up \
+	data/s6/artix-live/type
 
-edit = sed -e "s|@datadir[@]|$(DESTDIR)$(PREFIX)/share/artools|g" \
-	-e "s|@sysconfdir[@]|$(DESTDIR)$(SYSCONFDIR)/artools|g" \
-	-e "s|@libdir[@]|$(DESTDIR)$(PREFIX)/lib/artools|g"
+S6_PI = \
+	data/s6/pacman-init/type \
+	data/s6/pacman-init/up \
+	data/s6/pacman-init/down
 
-%: %.in Makefile
+S6_BUNDLE = \
+	data/s6/live/type \
+	data/s6/live/contents
+
+66_LIVE = \
+	data/66/artix-live
+
+66_PI = \
+	data/66/pacman-init
+
+XDG = $(wildcard data/*.desktop)
+
+XBIN = bin/desktop-items
+
+SYSUSERS = \
+	data/sysusers
+
+RM = rm -f
+M4 = m4 -P
+CHMODAW = chmod a-w
+CHMODX = chmod +x
+
+all: $(BIN) $(SYSUSERS) $(XBIN) $(RC) $(RUNIT_SVD) $(S6_PI) $(S6_LIVE)
+
+EDIT = sed -e "s|@datadir[@]|$(DATADIR)|g" \
+	-e "s|@sysconfdir[@]|$(SYSCONFDIR)|g" \
+	-e "s|@bindir[@]|$(BINDIR)|g" \
+	-e "s|@libdir[@]|$(LIBDIR)|g" \
+	-e "s|@live[@]|$(LIVEUSER)|g"
+
+%: %.in Makefile lib/util-live.sh
 	@echo "GEN $@"
 	@$(RM) "$@"
-	@m4 -P $@.in | $(edit) >$@
-	@chmod a-w "$@"
-	@chmod +x "$@"
+	@{ echo -n 'm4_changequote([[[,]]])'; cat $@.in; } | $(M4) | $(EDIT) >$@
+	@$(CHMODAW) "$@"
+	@$(CHMODX) "$@"
+	@bash -O extglob -n "$@"
 
 clean:
-	rm -f $(BIN) $(RC) ${GRUB_D}
+	$(RM) $(BIN) $(SYSUSERS) $(XBIN) $(RC) $(RUNIT_SVD) $(S6_PI) $(S6_LIVE)
 
 install_base:
-	install -dm0755 $(DESTDIR)$(PREFIX)/bin
-	install -m0755 ${BIN} $(DESTDIR)$(PREFIX)/bin
+	install $(DMODE) $(DESTDIR)$(BINDIR)
+	install $(BMODE) $(BIN) $(DESTDIR)$(BINDIR)
 
-	install -dm0755 $(DESTDIR)$(PREFIX)/lib/artools
-	install -m0644 ${LIBS} $(DESTDIR)$(PREFIX)/lib/artools
+	install $(DMODE) $(DESTDIR)$(SYSUSERSDIR)
+	install $(FMODE) $(SYSUSERS) $(DESTDIR)$(SYSUSERSDIR)/live-artix.conf
 
-	install -dm0755 $(DESTDIR)$(PREFIX)/share/artools
-	install -m0644 ${SHARED} $(DESTDIR)$(PREFIX)/share/artools
+	install $(DMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
+	install $(FMODE) $(SHARED) $(DESTDIR)$(DATADIR)/$(TOOLS)
 
 install_rc:
-	install -dm0755 $(DESTDIR)$(SYSCONFDIR)/init.d
-	install -m0755 ${RC} $(DESTDIR)$(SYSCONFDIR)/init.d
+	install $(DMODE) $(DESTDIR)$(SYSCONFDIR)/init.d
+	install $(BMODE) $(RC) $(DESTDIR)$(SYSCONFDIR)/init.d
 
-install_portable_efi:
-	install -dm0755 $(DESTDIR)$(SYSCONFDIR)/default
-	install -m0755 $(GRUB_DEFAULT) $(DESTDIR)$(SYSCONFDIR)/default
+install_runit:
+	install $(DMODE) $(DESTDIR)$(SYSCONFDIR)/rc/sysinit
+	install $(DMODE) $(DESTDIR)$(LIBDIR)/rc/sv.d
 
-	install -dm0755 $(DESTDIR)$(SYSCONFDIR)/grub.d
-	install -m0755 $(GRUB_D) $(DESTDIR)$(SYSCONFDIR)/grub.d
+	install $(BMODE) $(RUNIT_SVD) $(DESTDIR)$(LIBDIR)/rc/sv.d
+	ln -sf $(LIBDIR)/rc/sv.d/live $(DESTDIR)$(SYSCONFDIR)/rc/sysinit/98-live
 
-uninstall_base:
-	for f in ${BIN}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$f; done
-	for f in ${SHARED}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/$$f; done
-	for f in ${LIBS}; do rm -f $(DESTDIR)$(PREFIX)/lib/artools/$$f; done
+	install $(DMODE) $(DESTDIR)$(SYSCONFDIR)/runit/sv/pacman-init
+	install $(BMODE) $(RUNIT_SV) $(DESTDIR)$(SYSCONFDIR)/runit/sv/pacman-init/run
 
-uninstall_portable_efi:
-	for f in ${GRUB_DEFAULT}; do rm -f $(DESTDIR)$(SYSCONFDIR)/default/$$f; done
-	for f in ${GRUB_D}; do rm -f $(DESTDIR)$(SYSCONFDIR)/grub.d/$$f; done
+install_s6:
+	install $(DMODE) $(DESTDIR)$(SYSCONFDIR)/s6/sv
 
-uninstall_rc:
-	for f in ${RC}; do rm -f $(DESTDIR)$(SYSCONFDIR)/init.d/$$f; done
+	install $(DMODE) $(DESTDIR)$(SYSCONFDIR)/s6/sv/pacman-init
+	install $(BMODE) $(S6_PI) $(DESTDIR)$(SYSCONFDIR)/s6/sv/pacman-init/
 
-install: install_base install_rc install_portable_efi
+	install $(DMODE) $(DESTDIR)$(SYSCONFDIR)/s6/sv/artix-live
+	install $(BMODE) $(S6_LIVE) $(DESTDIR)$(SYSCONFDIR)/s6/sv/artix-live/
 
-uninstall: uninstall_base uninstall_rc uninstall_portable_efi
+	install $(DMODE) $(DESTDIR)$(SYSCONFDIR)/s6/sv/live
+	install $(BMODE) $(S6_BUNDLE) $(DESTDIR)$(SYSCONFDIR)/s6/sv/live/
 
-dist:
-	git archive --format=tar --prefix=live-services-$(Version)/ $(Version) | gzip -9 > live-services-$(Version).tar.gz
-	gpg --detach-sign --use-agent live-services-$(Version).tar.gz
+install_66:
+	install $(DMODE) $(DESTDIR)$(SYSCONFDIR)/66/service
 
-.PHONY: all clean install uninstall dist
+	install $(FMODE) $(66_LIVE) $(DESTDIR)$(SYSCONFDIR)/66/service/artix-live
+	install $(FMODE) $(66_PI) $(DESTDIR)$(SYSCONFDIR)/66/service/pacman-init
+
+install_xdg:
+	install -dm0755 $(DESTDIR)$(PREFIX)/bin
+	install -m0755 ${XBIN} $(DESTDIR)$(PREFIX)/bin
+
+	install -dm0755 $(DESTDIR)$(SYSCONFDIR)/skel/.config/autostart
+	install -m0755 ${XDG} $(DESTDIR)$(SYSCONFDIR)/skel/.config/autostart
+
+install: install_base install_rc install_runit install_s6 install_xdg
+
+.PHONY: install

bin/artix-live.in

@@ -1,62 +1,23 @@
-#!/bin/sh
+#!/bin/bash
+
+m4_include(lib/util-live.sh)
 
-LIBDIR='@libdir@'
-DATADIR='@datadir@'
-SYSCONFDIR='@sysconfdir@'
 LOGFILE='/var/log/artix-live.log'
 
-export LC_MESSAGES=C
-export LANG=C
-
-livetimer=$(date +%s%3N)
-
-[[ -r ${LIBDIR}/util-live.sh ]] && source ${LIBDIR}/util-live.sh
-
-load_live_config "${SYSCONFDIR}/live.conf" || load_live_config "${DATADIR}/live.conf"
-
-livetimer=$(get_timer_ms)
-detect_desktop_env
-echo "Detected ${default_desktop_executable} ${default_desktop_file}: $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
-
-livetimer=$(get_timer_ms)
 CONSOLEFONT="$(kernel_cmdline vconsole.font)"
 CONSOLEMAP="$(kernel_cmdline vconsole.font.map)"
-arch=$(uname -m)
-echo "Got consolefont and arch $arch: $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
+#echo "Got consolefont ${CONSOLEFONT} and consolemap ${CONSOLEMAP}" >> "${LOGFILE}"
 
-# Activate swap
-livetimer=$(get_timer_ms)
 configure_swap
-echo "Activated swap and added to fstab: $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
 
-livetimer=$(get_timer_ms)
 configure_language
-echo "Finished localization: $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
 
-livetimer=$(get_timer_ms)
 configure_user
-echo "Created user ${username} with password ${password}: $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
 
-livetimer=$(get_timer_ms)
-configure_sudoers_d
-echo "Configured sudoers: $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
+detect_desktop_env
 
-# livetimer=$(get_timer_ms)
-# configure_machine_id
-# echo "Configured machine-id: $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
+configure_accountsservice
 
-livetimer=$(get_timer_ms)
-configure_accountsservice "${username}"
-echo "Configured accountsservice: $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
-
-livetimer=$(get_timer_ms)
 configure_displaymanager
-echo "Configured displaymanager: $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
 
-livetimer=$(get_timer_ms)
-configure_calamares
-echo "Configured calamares unpack ${unpack} $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
-
-livetimer=$(get_timer_ms)
-configure_user_root /
-echo "Configured root user: $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
+configure_branding

bin/desktop-items.in

@@ -0,0 +1,37 @@
+#!/bin/sh
+
+# Ensure the user directories are created, some DEs (MATE)
+# create them after autostart scripts are run
+xdg-user-dirs-update --force
+
+xdg=$(xdg-user-dir DESKTOP)
+src=@datadir@/applications
+
+# if [[ -f $src/org.kde.konversation.desktop ]]; then
+#     install -m644 $src/org.kde.konversation.desktop \
+#     $xdg/org.kde.konversation.desktop
+# fi
+
+if [[ -f @bindir@/calamares ]]; then
+    cp -f $src/calamares.desktop "$xdg/"
+    sed -i s/Icon.*=calamares/Icon=artixlinux-logo/g "$xdg"/calamares.desktop
+    chmod +x "$xdg/calamares.desktop"
+fi
+
+docs=@datadir@/doc/artix
+
+for f in {Configuration,Troubleshooting}.pdf; do
+    ln -s $docs/$f "$xdg"/$f
+done
+
+if [[ -d /run/openrc ]]; then
+    ln -s $docs/OpenRC.pdf "$xdg"/OpenRC.pdf
+elif [[ -d /run/runit ]]; then
+    ln -s $docs/Runit.pdf "$xdg"/Runit.pdf
+elif [[ -d /run/66 ]]; then
+    ln -s $docs/Suite66.pdf "$xdg"/Suite66.pdf
+else
+    ln -s $docs/S6.pdf "$xdg"/S6.pdf
+fi
+
+echo "live session details: /var/log/artix-live.log" > "$xdg"/README.txt

data/66/artix-live

@@ -0,0 +1,8 @@
+[main]
+@type = oneshot
+@version = 0.0.1
+@description = "artix-live service"
+@user = ( root )
+
+[start]
+@execute = (artix-live)

data/66/pacman-init

@@ -0,0 +1,14 @@
+[main]
+@type = oneshot
+@description = "pacman init service"
+@version = 0.0.2
+@user = ( root )
+@extdepends = ( haveged )
+
+[start]
+@execute = (
+foreground { mkdir -p /etc/pacman.d/gnupg }
+foreground { mount -t tmpfs -o size=10M,mode=0755 tmpfs /etc/pacman.d/gnupg }
+fdmove -c 2 1
+foreground { pacman-key --init }
+foreground { pacman-key --populate artix } )

data/99_zzz-portable-efi.in

@@ -1,49 +0,0 @@
-#!/bin/sh
-
-# grub-mkconfig helper script.
-#
-# Copyright © 2014 Niall Walsh <niallwalsh@celtux.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-set -e
-
-AT_EFI_STANDALONE=""
-AT_EFI_PORTABLE_PATH="/boot/efi/EFI/BOOT"
-
-# override tool behaviour through /etc/default/grub2-fll-standalone
-if [ -r /etc/default/grub2-portable-efi ]; then
-	. /etc/default/grub2-portable-efi
-fi
-
-patt='[[:space:]]-o[[:space:]]\+/boot/grub/grub.cfg'
-# do nothing if disabled or grub-mkconfig is generating /boot/grub/grub.cfg
-( [ "${AT_EFI_STANDALONE}" != "disable" ] && \
-	ps x | grep 'grub-mkconfig[[:space:]]' | grep -q -e "${patt}[[:space:]]" -e "${patt}$" ) || exit
-
-beeb="${AT_EFI_PORTABLE_PATH}"
-if [ -e "${beeb}" ]; then
-	# do not do anything to a beeb we didn't create
-	[ ! -e "${beeb}/fullstory" ] && exit
-else
-	# create beeb and mark it as ours
-	mkdir -p "${beeb}"
-	touch "${beeb}/fullstory"
-fi
-
-for platform in i386-efi x86_64-efi ; do
-	filename="bootx64"
-	[ "${platform}" = "i386-efi" ] && filename="bootia32"
-	[ -e /usr/lib/grub/${platform} ] && grub-mkstandalone \
-		-o ${beeb}/${filename}.efi --compress=xz  -O ${platform} \
-		/boot/grub/grub.cfg=/boot/grub/grub.cfg.new 2>&1 > /dev/null
-done
-

data/desktop.map

@@ -4,15 +4,15 @@ jwm:jwm
 i3:i3
 fluxbox:startfluxbox
 pekwm:pekwm
-plasma:startkde
-gnome:gnome-session
-xfce:startxfce4
-cinnamon:cinnamon-session-cinnamon
-mate:mate-session
 enlightenment:enlightenment_start
+Lumina-DE:start-lumina-desktop
 LXDE:lxsession
+plasma:startplasma-x11
 lxqt:lxqt-session
 pantheon:pantheon-session
 budgie-desktop:budgie-desktop
 deepin:startdde
-Lumina-DE:start-lumina-desktop
+mate:mate-session
+cinnamon:cinnamon-session-cinnamon
+xfce:startxfce4
+gnome:gnome-session

data/grub2-portable-efi

@@ -1,15 +0,0 @@
-# Defaults for grub2-portable-efi update-grub helper
-# sourced by grub2's update-grub
-# installed at /etc/default/grub2-portable-efi by the maintainer scripts
-
-#
-# This is a POSIX shell fragment
-#
-
-# specify is this should be disabled (set to "disable")
-# default:
-#AT_EFI_STANDALONE=""
-
-# specify where to install the portable efi
-# default: /boot/efi/EFI/BOOT
-#AT_EFI_PORTABLE_PATH="/boot/efi/EFI/BOOT"

data/live.conf

@@ -1,20 +1,7 @@
 # live session configuration
 
 # autologin
-autologin=true
-
-# live username
-username=artix
+AUTOLOGIN=true
 
 # live password
-password=artix
-
-# live group membership
-addgroups='video,power,disk,storage,optical,network,lp,scanner,wheel'
-
-# default_desktop_file
-default_desktop_file=lxqt
-
-# default_desktop_executable
-default_desktop_executable=lxqt-session
-
+PASSWORD=artix

data/rc/gnupg-mount.in

@@ -1,5 +1,5 @@
 #!/usr/bin/openrc-run
-# Copyright 2015 artoo (artoo@cromnix.org)
+# Copyright 2019 artoo (artoo@artixlinux.org)
 # Distributed under the terms of the GNU General Public License v2
 
 target_dir=/etc/pacman.d/gnupg

data/rc/pacman-init.in

@@ -12,6 +12,6 @@ depend() {
 start() {
 	ebegin "Running pacman initialization"
 	/usr/bin/pacman-key --init &> /dev/null
-	/usr/bin/pacman-key --populate archlinux artix &> /dev/null
+	/usr/bin/pacman-key --populate artix &> /dev/null
 	eend $?
 }

data/runit/live.in

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+. @libdir@/rc/functions
+
+case "$1" in
+    start)
+        stat_busy "Initializing artix live system"
+        artix-live #|| stat_die
+        add_daemon live
+        stat_done
+        ;;
+    *)
+        echo "usage: $0 {start}"
+        ;;
+esac

data/runit/pacman-init.run

@@ -0,0 +1,5 @@
+#!/bin/sh
+mount -t tmpfs -o size=10M,mode=0755 tmpfs /etc/pacman.d/gnupg
+pacman-key --init 1>&2
+pacman-key --populate artix 1>&2
+exec chpst -b pacman-init pause

data/s6/artix-live/type.in

@@ -0,0 +1 @@
+oneshot

data/s6/artix-live/up.in

@@ -0,0 +1,2 @@
+#!@bindir@/execlineb -P
+exec @bindir@/artix-live

data/s6/live/contents

@@ -0,0 +1,2 @@
+artix-live
+pacman-init

data/s6/live/type

@@ -0,0 +1 @@
+bundle

data/s6/pacman-init/down.in

@@ -0,0 +1,2 @@
+#!@bindir@/execlineb -P
+umount -l /etc/pacman.d/gnupg

data/s6/pacman-init/type.in

@@ -0,0 +1 @@
+oneshot

data/s6/pacman-init/up.in

@@ -0,0 +1,6 @@
+#!@bindir@/execlineb -P
+foreground { mkdir -p /etc/pacman.d/gnupg }
+foreground { mount -t tmpfs -o size=10M,mode=0755 tmpfs /etc/pacman.d/gnupg }
+fdmove -c 2 1
+foreground { pacman-key --init }
+foreground { pacman-key --populate artix }

data/sysusers.in

@@ -0,0 +1,12 @@
+# artix live user
+u @live@ 1000 - /home/@live@ /bin/bash
+
+m @live@ video
+m @live@ power
+m @live@ cdrom
+m @live@ network
+m @live@ lp
+m @live@ scanner
+m @live@ wheel
+m @live@ log
+m @live@ users

lib/util-live.sh

@@ -1,318 +1,259 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+#!/hint/bash
+
+export LC_MESSAGES=C
+export LANG=C
+
+# {{{ functions
 
 kernel_cmdline(){
-	for param in $(cat /proc/cmdline); do
-		case "${param}" in
-			$1=*) echo "${param##*=}"; return 0 ;;
-			$1) return 0 ;;
-			*) continue ;;
-		esac
-	done
-	[ -n "${2}" ] && echo "${2}"
-	return 1
+    for param in $(cat /proc/cmdline); do
+        case "${param}" in
+            $1=*) echo "${param##*=}"; return 0 ;;
+            "$1") return 0 ;;
+            *) continue ;;
+        esac
+    done
+    [ -n "${2}" ] && echo "${2}"
+    return 1
 }
 
 get_lang(){
-	echo $(kernel_cmdline lang)
+    kernel_cmdline lang
 }
 
 get_keytable(){
-	echo $(kernel_cmdline keytable)
+    kernel_cmdline keytable
 }
 
 get_tz(){
-	echo $(kernel_cmdline tz)
-}
-
-get_cal_mode(){
-	echo $(kernel_cmdline unpack)
-}
-
-get_timer_ms(){
-	echo $(date +%s%3N)
-}
-
-# $1: start timer
-elapsed_time_ms(){
-	echo $(echo $1 $(get_timer_ms) | awk '{ printf "%0.3f",($2-$1)/1000 }')
-}
-
-load_live_config(){
-
-	[[ -f $1 ]] || return 1
-
-	live_conf="$1"
-
-	[[ -r ${live_conf} ]] && source ${live_conf}
-
-	[[ -z ${autologin} ]] && autologin=true
-
-	[[ -z ${username} ]] && username="cromnix"
-
-	[[ -z ${password} ]] && password="cromnix"
-
-	[[ -z ${addgroups} ]] && addgroups=""
-
-	echo "Loaded ${live_conf}: $(elapsed_time_ms ${livetimer})ms" >> "${LOGFILE}"
-
-	return 0
+    kernel_cmdline tz
 }
 
 is_valid_de(){
-	if [[ ${default_desktop_executable} != "none" ]] && \
-	[[ ${default_desktop_file} != "none" ]]; then
-		return 0
-	else
-		return 1
-	fi
-}
-
-load_desktop_map(){
-    local _space="s| ||g" _clean=':a;N;$!ba;s/\n/ /g' _com_rm="s|#.*||g" \
-        file=${DATADIR}/desktop.map
-    local desktop_map=$(sed "$_com_rm" "$file" \
-            | sed "$_space" \
-            | sed "$_clean")
-    echo ${desktop_map}
+    if [[ ${DEFAULT_DESKTOP_EXECUTABLE} != "none" ]] && \
+    [[ ${DEFAULT_DESKTOP_FILE} != "none" ]]; then
+        return 0
+    fi
+    return 1
 }
 
 detect_desktop_env(){
-    local xs=/usr/share/xsessions ex=/usr/bin key val map=( $(load_desktop_map) )
-    default_desktop_file="none"
-    default_desktop_executable="none"
-    for item in "${map[@]}";do
+    local key val map
+    map="${DATADIR}"/artools/desktop.map
+    DEFAULT_DESKTOP_FILE="none"
+    DEFAULT_DESKTOP_EXECUTABLE="none"
+    while read -r item; do
         key=${item%:*}
         val=${item#*:}
-        if [[ -f $xs/$key.desktop ]] && [[ -f $ex/$val ]];then
-            default_desktop_file="$key"
-            default_desktop_executable="$val"
+        if [[ -f "${DATADIR}"/xsessions/$key.desktop ]] && [[ -f ${BINDIR}/$val ]];then
+            DEFAULT_DESKTOP_FILE="$key"
+            DEFAULT_DESKTOP_EXECUTABLE="$val"
         fi
-    done
+    done < "$map"
+    echo "Detected ${DEFAULT_DESKTOP_EXECUTABLE} ${DEFAULT_DESKTOP_FILE}" >> "${LOGFILE}"
 }
 
 configure_accountsservice(){
-	local path=/var/lib/AccountsService/users
-	if [ -d "${path}" ] ; then
-		echo "[User]" > ${path}/$1
-		echo "XSession=${default_desktop_file}" >> ${path}/$1
-		if [[ -f "/var/lib/AccountsService/icons/$1.png" ]];then
-			echo "Icon=/var/lib/AccountsService/icons/$1.png" >> ${path}/$1
-		fi
-	fi
+    local path=/var/lib/AccountsService/users user="${1:-${LIVEUSER}}"
+    if [ -d "${path}" ] ; then
+        echo "[User]" > ${path}/"$user"
+        echo "XSession=${DEFAULT_DESKTOP_FILE}" >> ${path}/"$user"
+        if [[ -f "/var/lib/AccountsService/icons/$user.png" ]];then
+            echo "Icon=/var/lib/AccountsService/icons/$user.png" >> ${path}/"$user"
+        fi
+    fi
+    echo "Configured accountsservice" >> "${LOGFILE}"
 }
 
  set_lightdm_greeter(){
-	local greeters=$(ls /usr/share/xgreeters/*greeter.desktop) name
-	for g in ${greeters[@]};do
-		name=${g##*/}
-		name=${name%%.*}
-		case ${name} in
-			lightdm-gtk-greeter) break ;;
-			lightdm-*-greeter)
-				sed -i -e "s/^.*greeter-session=.*/greeter-session=${name}/" /etc/lightdm/lightdm.conf
-			;;
-		esac
-	done
- }
-
- set_lightdm_vt(){
-	sed -i -e 's/^.*minimum-vt=.*/minimum-vt=7/' /etc/lightdm/lightdm.conf
+    local name
+    for g in "${DATADIR}"/xgreeters/*.desktop;do
+        name=${g##*/}
+        name=${name%%.*}
+        case ${name} in
+            lightdm-gtk-greeter) break ;;
+            lightdm-*-greeter)
+                sed -e "s/^.*greeter-session=.*/greeter-session=${name}/" \
+                    -i /etc/lightdm/lightdm.conf
+            ;;
+        esac
+    done
  }
 
 configure_displaymanager(){
-	# Try to detect desktop environment
-	# Configure display manager
-	if [[ -f /usr/bin/lightdm ]];then
-		groupadd -r autologin
-		set_lightdm_vt
-		set_lightdm_greeter
-		if $(is_valid_de); then
-			sed -i -e "s/^.*user-session=.*/user-session=$default_desktop_file/" /etc/lightdm/lightdm.conf
-		fi
-		if ${autologin};then
-			gpasswd -a ${username} autologin &> /dev/null
-			sed -i -e "s/^.*autologin-user=.*/autologin-user=${username}/" /etc/lightdm/lightdm.conf
-			sed -i -e "s/^.*autologin-user-timeout=.*/autologin-user-timeout=0/" /etc/lightdm/lightdm.conf
-			sed -i -e "s/^.*pam-autologin-service=.*/pam-autologin-service=lightdm-autologin/" /etc/lightdm/lightdm.conf
-		fi
-	elif [[ -f /usr/bin/gdm ]];then
-		configure_accountsservice "gdm"
-		if ${autologin};then
-			sed -i -e "s/\[daemon\]/\[daemon\]\nAutomaticLogin=${username}\nAutomaticLoginEnable=True/" /etc/gdm/custom.conf
-		fi
-	elif [[ -f /usr/bin/mdm ]];then
-		if $(is_valid_de); then
-			sed -i "s|default.desktop|$default_desktop_file.desktop|g" /etc/mdm/custom.conf
-		fi
-	elif [[ -f /usr/bin/sddm ]];then
-		if $(is_valid_de); then
-			sed -i -e "s|^Session=.*|Session=$default_desktop_file.desktop|" /etc/sddm.conf
-		fi
-		if ${autologin};then
-			sed -i -e "s|^User=.*|User=${username}|" /etc/sddm.conf
-		fi
-	elif [[ -f /usr/bin/lxdm ]];then
-		if $(is_valid_de); then
-			sed -i -e "s|^.*session=.*|session=/usr/bin/$default_desktop_executable|" /etc/lxdm/lxdm.conf
-		fi
-		if ${autologin};then
-			sed -i -e "s/^.*autologin=.*/autologin=${username}/" /etc/lxdm/lxdm.conf
-		fi
-	fi
-}
+    # Try to detect desktop environment
+    # Configure display manager
 
-gen_pw(){
-	echo $(perl -e 'print crypt($ARGV[0], "password")' ${password})
-}
-
-configure_user(){
-	# set up user and password
-	if [[ -n ${password} ]];then
-		useradd -m -G ${addgroups} -p $(gen_pw) -s /bin/bash ${username}
-	else
-		useradd -m -G ${addgroups} -s /bin/bash ${username}
-	fi
+    if [[ -f "${BINDIR}"/lightdm ]];then
+        groupadd -r autologin
+        gpasswd -a "${LIVEUSER}" autologin &> /dev/null
+        set_lightdm_greeter
+        if is_valid_de; then
+            sed -e "s/^.*user-session=.*/user-session=$DEFAULT_DESKTOP_FILE/" \
+                -e 's/^.*minimum-vt=.*/minimum-vt=7/' \
+                -i /etc/lightdm/lightdm.conf
+        fi
+        ${AUTOLOGIN} && sed -e "s/^.*autologin-user=.*/autologin-user=${LIVEUSER}/" \
+                -e "s/^.*autologin-user-timeout=.*/autologin-user-timeout=0/" \
+                -e "s/^.*pam-autologin-service=.*/pam-autologin-service=lightdm-autologin/" \
+                -i /etc/lightdm/lightdm.conf
+    elif [[ -f "${BINDIR}"/gdm ]];then
+        configure_accountsservice "gdm"
+        ${AUTOLOGIN} && sed -e "s/\[daemon\]/\[daemon\]\nAutomaticLogin=${LIVEUSER}\nAutomaticLoginEnable=True/" \
+                -i /etc/gdm/custom.conf
+    elif [[ -f "${BINDIR}"/sddm ]];then
+        if is_valid_de; then
+            sed -e "s|^Session=.*|Session=$DEFAULT_DESKTOP_FILE.desktop|" \
+                -i /etc/sddm.conf
+        fi
+        ${AUTOLOGIN} && sed -e "s|^User=.*|User=${LIVEUSER}|" \
+                -i /etc/sddm.conf
+    elif [[ -f "${BINDIR}"/lxdm ]];then
+        if is_valid_de; then
+            sed -e "s|^.*session=.*|session=${BINDIR}/${DEFAULT_DESKTOP_EXECUTABLE}|" \
+                -i /etc/lxdm/lxdm.conf
+        fi
+        ${AUTOLOGIN} && sed -e "s/^.*autologin=.*/autologin=${LIVEUSER}/" \
+                -i /etc/lxdm/lxdm.conf
+    fi
+    echo "Configured displaymanager" >> "${LOGFILE}"
 }
 
 find_legacy_keymap(){
-	local file="${DATADIR}/kbd-model.map"
-	while read -r line || [[ -n $line ]]; do
-		if [[ -z $line ]] || [[ $line == \#* ]]; then
-			continue
-		fi
+    local file="${DATADIR}/artools/kbd-model.map" kt="$1"
+    while read -r line || [[ -n $line ]]; do
+        if [[ -z $line ]] || [[ $line == \#* ]]; then
+            continue
+        fi
 
-		mapping=( $line ); # parses columns
-		if [[ ${#mapping[@]} != 5 ]]; then
-			continue
-		fi
+        local mapping=( "$line" ); # parses columns
+        if [[ ${#mapping[@]} != 5 ]]; then
+            continue
+        fi
 
-		if  [[ "${keytable}" != "${mapping[0]}" ]]; then
-			continue
-		fi
+        if  [[ "$kt" != "${mapping[0]}" ]]; then
+            continue
+        fi
 
-		if [[ "${mapping[3]}" = "-" ]]; then
-			mapping[3]=""
-		fi
+        if [[ "${mapping[3]}" == "-" ]]; then
+            mapping[3]=""
+        fi
 
-		X11_LAYOUT=${mapping[1]}
-		X11_MODEL=${mapping[2]}
-		X11_VARIANT=${mapping[3]}
-		x11_OPTIONS=${mapping[4]}
-	done < $file
+        X11_LAYOUT=${mapping[1]}
+        X11_MODEL=${mapping[2]}
+        X11_VARIANT=${mapping[3]}
+        X11_OPTIONS=${mapping[4]}
+    done < $file
 }
 
 write_x11_config(){
-	# find a x11 layout that matches the keymap
-	# in isolinux if you select a keyboard layout and a language that doesnt match this layout,
-	# it will provide the correct keymap, but not kblayout value
-	local X11_LAYOUT=
-	local X11_MODEL="pc105"
-	local X11_VARIANT=""
-	local X11_OPTIONS="terminate:ctrl_alt_bksp"
+    # find a x11 layout that matches the keymap
+    # in isolinux if you select a keyboard layout and a language that doesnt match this layout,
+    # it will provide the correct keymap, but not kblayout value
+    local X11_LAYOUT=
+    local X11_MODEL="pc105"
+    local X11_VARIANT=""
+    local X11_OPTIONS="terminate:ctrl_alt_bksp"
+    local kt="$1"
 
-	find_legacy_keymap
+    find_legacy_keymap "$kt"
 
-	# layout not found, use KBLAYOUT
-	if [[ -z "$X11_LAYOUT" ]]; then
-		X11_LAYOUT="${keytable}"
-	fi
+    # layout not found, use KBLAYOUT
+    if [[ -z "$X11_LAYOUT" ]]; then
+        X11_LAYOUT="$kt"
+    fi
 
-	# create X11 keyboard layout config
-	mkdir -p "/etc/X11/xorg.conf.d"
+    # create X11 keyboard layout config
+    mkdir -p "/etc/X11/xorg.conf.d"
 
-	local XORGKBLAYOUT="/etc/X11/xorg.conf.d/00-keyboard.conf"
+    local XORGKBLAYOUT="/etc/X11/xorg.conf.d/00-keyboard.conf"
 
-	echo "" >> "$XORGKBLAYOUT"
-	echo "Section \"InputClass\"" > "$XORGKBLAYOUT"
-	echo " Identifier \"system-keyboard\"" >> "$XORGKBLAYOUT"
-	echo " MatchIsKeyboard \"on\"" >> "$XORGKBLAYOUT"
-	echo " Option \"XkbLayout\" \"$X11_LAYOUT\"" >> "$XORGKBLAYOUT"
-	echo " Option \"XkbModel\" \"$X11_MODEL\"" >> "$XORGKBLAYOUT"
-	echo " Option \"XkbVariant\" \"$X11_VARIANT\"" >> "$XORGKBLAYOUT"
-	echo " Option \"XkbOptions\" \"$X11_OPTIONS\"" >> "$XORGKBLAYOUT"
-	echo "EndSection" >> "$XORGKBLAYOUT"
+    echo "Section \"InputClass\"" > "$XORGKBLAYOUT"
+    {
+    echo " Identifier \"system-keyboard\""
+    echo " MatchIsKeyboard \"on\""
+    echo " Option \"XkbLayout\" \"$X11_LAYOUT\""
+    echo " Option \"XkbModel\" \"$X11_MODEL\""
+    echo " Option \"XkbVariant\" \"$X11_VARIANT\""
+    echo " Option \"XkbOptions\" \"$X11_OPTIONS\""
+    echo "EndSection"
+    } >> "$XORGKBLAYOUT"
 }
 
 configure_language(){
     # hack to be able to set the locale on bootup
-    local lang=$(get_lang)
+    local lang keytable timezone
+    lang=$(get_lang)
     keytable=$(get_keytable)
-    local timezone=$(get_tz)
-    # Fallback
-#     [[ -z "${lang}" ]] && lang="en_US"
-#     [[ -z "${keytable}" ]] && keytable="us"
-#     [[ -z "${timezone}" ]] && timezone="Etc/UTC"
+    timezone=$(get_tz)
 
     sed -e "s/#${lang}.UTF-8/${lang}.UTF-8/" -i /etc/locale.gen
 
-    # 	echo "LANG=${lang}.UTF-8" >> /etc/environment
-
-    if [[ -d /run/openrc ]]; then
-        sed -i "s/keymap=.*/keymap=\"${keytable}\"/" /etc/conf.d/keymaps
-    fi
     echo "KEYMAP=${keytable}" > /etc/vconsole.conf
     echo "LANG=${lang}.UTF-8" > /etc/locale.conf
-    ln -sf /usr/share/zoneinfo/${timezone} /etc/localtime
+    ln -sf "${DATADIR}"/zoneinfo/"${timezone}" /etc/localtime
 
-    write_x11_config
+    write_x11_config "${keytable}"
 
     loadkeys "${keytable}"
 
-    locale-gen ${lang}
-    echo "Configured language: ${lang}" >> "${LOGFILE}"
-    echo "Configured keymap: ${keytable}" >> "${LOGFILE}"
-    echo "Configured timezone: ${timezone}" >> "${LOGFILE}"
-}
-
-write_unpack_conf(){
-    local conf="/etc/calamares/modules/unpackfs.conf"
-    echo "---" > "$conf"
-    echo "unpack:" >> "$conf"
-    echo "    - source: \"/run/miso/bootmnt/artix/$(uname -m)/rootfs.sfs\"" >> "$conf"
-    echo "      sourcefs: \"squashfs\"" >> "$conf"
-    echo "      destination: \"\"" >> "$conf"
-    echo "    - source: \"/run/miso/bootmnt/artix/$(uname -m)/desktopfs.sfs\"" >> "$conf"
-    echo "      sourcefs: \"squashfs\"" >> "$conf"
-    echo "      destination: \"\"" >> "$conf"
-}
-
-configure_calamares(){
-    if [[ -f /usr/bin/calamares ]];then
-        unpack=$(get_cal_mode)
-        if [[ "${unpack}" == 'yes' ]];then
-            sed -e "/- netinstall/d" \
-                -e "s|- chrootcfg|- unpackfs|" -i /etc/calamares/settings.conf
-
-            sed -e '$ d' -i /etc/calamares/modules/welcome.conf
-
-            write_unpack_conf
-        fi
-    fi
-}
-
-configure_sudoers_d(){
-	echo "%wheel  ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/g_wheel
-	echo "root ALL=(ALL) ALL"  > /etc/sudoers.d/u_root
+    locale-gen "${lang}"
+    {
+    echo "Configured language: ${lang}"
+    echo "Configured keymap: ${keytable}"
+    echo "Configured timezone: ${timezone}"
+    echo "Finished localization"
+    } >> "${LOGFILE}"
 }
 
 configure_swap(){
-	local swapdev="$(fdisk -l 2>/dev/null | grep swap | cut -d' ' -f1)"
-	if [ -e "${swapdev}" ]; then
-		swapon ${swapdev}
-	fi
+    local swapdev
+    swapdev="$(fdisk -l 2>/dev/null | grep swap | cut -d' ' -f1)"
+    if [ -e "${swapdev}" ]; then
+        swapon "${swapdev}"
+    fi
+    echo "Activated swap and added to fstab" >> "${LOGFILE}"
 }
 
-configure_user_root(){
-	# set up root password
-	echo "root:${password}" | chroot $1 chpasswd
-	cp /etc/skel/.{bash_profile,bashrc,bash_logout} /root/
+configure_branding(){
+    if [[ -f "${BINDIR}"/neofetch ]]; then
+        neofetch >| /etc/issue
+        echo "Configured branding" >> "${LOGFILE}"
+    fi
 }
+
+configure_user(){
+    echo "root:${PASSWORD}" | chroot / chpasswd
+    cp /etc/skel/.{bash_profile,bashrc,bash_logout} /root/
+
+    mkdir /home/${LIVEUSER}
+    chown ${LIVEUSER}:${LIVEUSER} /home/${LIVEUSER}
+    echo "${LIVEUSER}:${PASSWORD}" | chroot / chpasswd
+    cp -r /etc/skel/.[^.]* /home/${LIVEUSER}
+    chown -R ${LIVEUSER}:${LIVEUSER} /home/${LIVEUSER}
+    echo "Configured live user ${LIVEUSER} with password ${PASSWORD}" >> "${LOGFILE}"
+}
+
+# }}}
+
+
+load_live_config(){
+
+    [[ -f $1 ]] || return 1
+
+    local live_conf="$1"
+
+    [[ -r "${live_conf}" ]] && source "${live_conf}"
+
+    AUTOLOGIN=${AUTOLOGIN:-true}
+
+    PASSWORD=${PASSWORD:-artix}
+
+    return 0
+}
+
+load_live_config "@sysconfdir@/artools/live.conf" || load_live_config "@datadir@/artools/live.conf"
+
+LIVEUSER=@live@
+DATADIR=@datadir@
+BINDIR=@bindir@