Merge pull request #36 from artix-linux/devel

Devel

Makefile

@@ -1,4 +1,4 @@
-Version=0.5
+Version=0.6
 
 PREFIX = /usr/local
 SYSCONFDIR = /etc
@@ -22,14 +22,7 @@ LIBS_BASE = \
 	lib/util-fstab.sh
 
 SHARED_BASE = \
-	data/pacman-default.conf \
+	$(wildcard data/pacman*.conf)
-	data/pacman-multilib.conf
-
-LIST_PKG = \
-	$(wildcard data/pkg.list.d/*.list)
-
-ARCH_CONF = \
-	$(wildcard data/make.conf.d/*.conf)
 
 LIST_IMPORT = \
 	$(wildcard data/import.list.d/*.list)
@@ -38,8 +31,8 @@ BIN_PKG = \
 	bin/checkpkg \
 	bin/lddd \
 	bin/finddeps \
+	bin/findupdates \
 	bin/find-libdeps \
-	bin/signpkgs \
 	bin/mkchrootpkg \
 	bin/buildpkg \
 	bin/buildtree \
@@ -51,6 +44,9 @@ LIBS_PKG = \
 SHARED_PKG = \
 	data/makepkg.conf
 
+PATCHES = \
+	$(wildcard data/patches/*.patch)
+
 BIN_ISO = \
 	bin/buildiso \
 	bin/deployiso
@@ -59,8 +55,7 @@ LIBS_ISO = \
 	$(wildcard lib/util-iso*.sh)
 
 SHARED_ISO = \
-	data/mkinitcpio.conf \
+	data/mkinitcpio.conf
-	data/profile.conf.example
 
 CPIOHOOKS = \
 	$(wildcard initcpio/hooks/*)
@@ -71,17 +66,24 @@ CPIOINST = \
 CPIO = \
 	initcpio/script/artix_shutdown
 
-BIN_YAML = \
+BASE = \
-	bin/buildyaml
+	$(wildcard data/base/Packages-*) \
+	data/base/profile.conf
 
-LIBS_YAML = \
+LIVE_ETC = \
-	$(wildcard lib/util-yaml*.sh) \
+	data/base/live-overlay/etc/issue \
-	lib/util-profile.sh
+	data/base/live-overlay/etc/fstab
 
-SHARED_YAML = \
+LIVE_ETC_DEFAULT = \
-	data/linux.preset
+	$(wildcard data/base/live-overlay/etc/default/*)
 
-all: $(BIN_BASE) $(BIN_PKG) $(BIN_ISO) $(BIN_YAML)
+LIVE_ETC_PAM = \
+	$(wildcard data/base/live-overlay/etc/pam.d/*)
+
+LIVE_ETC_SUDOERS = \
+	$(wildcard data/base/live-overlay/etc/sudoers.d/*)
+
+all: $(BIN_BASE) $(BIN_PKG) $(BIN_ISO)
 
 edit = sed -e "s|@datadir[@]|$(DESTDIR)$(PREFIX)/share/artools|g" \
 	-e "s|@sysconfdir[@]|$(DESTDIR)$(SYSCONFDIR)/artools|g" \
@@ -112,18 +114,14 @@ install_base:
 	install -m0644 ${SHARED_BASE} $(DESTDIR)$(PREFIX)/share/artools
 
 install_pkg:
-	install -dm0755 $(DESTDIR)$(SYSCONFDIR)/artools/pkg.list.d
-	install -m0644 ${LIST_PKG} $(DESTDIR)$(SYSCONFDIR)/artools/pkg.list.d
-
 	install -dm0755 $(DESTDIR)$(SYSCONFDIR)/artools/import.list.d
 	install -m0644 ${LIST_IMPORT} $(DESTDIR)$(SYSCONFDIR)/artools/import.list.d
 
-	install -dm0755 $(DESTDIR)$(SYSCONFDIR)/artools/make.conf.d
-	install -m0644 ${ARCH_CONF} $(DESTDIR)$(SYSCONFDIR)/artools/make.conf.d
-
 	install -dm0755 $(DESTDIR)$(PREFIX)/bin
 	install -m0755 ${BIN_PKG} $(DESTDIR)$(PREFIX)/bin
 
+	ln -sf buildpkg $(DESTDIR)$(PREFIX)/bin/buildpkg-testing
+
 	ln -sf find-libdeps $(DESTDIR)$(PREFIX)/bin/find-libprovides
 
 	install -dm0755 $(DESTDIR)$(PREFIX)/lib/artools
@@ -132,10 +130,31 @@ install_pkg:
 	install -dm0755 $(DESTDIR)$(PREFIX)/share/artools
 	install -m0644 ${SHARED_PKG} $(DESTDIR)$(PREFIX)/share/artools
 
+	install -dm0755 $(DESTDIR)$(PREFIX)/share/artools/patches
+	install -m0644 ${PATCHES} $(DESTDIR)$(PREFIX)/share/artools/patches
+
+install_isobase:
+	install -dm0755 $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base
+	install -m0644 ${BASE} $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base
+
+	install -dm0755 $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc
+	install -m0644 ${LIVE_ETC} $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc
+
+	install -dm0755 $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc/default
+	install -m0644 ${LIVE_ETC_DEFAULT} $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc/default
+
+	install -dm0755 $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc/pam.d
+	install -m0644 ${LIVE_ETC_PAM} $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc/pam.d
+
+	install -dm0755 $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc/sudoers.d
+	install -m0644 ${LIVE_ETC_SUDOERS} $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc/sudoers.d
+
 install_iso:
 	install -dm0755 $(DESTDIR)$(PREFIX)/bin
 	install -m0755 ${BIN_ISO} $(DESTDIR)$(PREFIX)/bin
 
+	ln -sf buildiso $(DESTDIR)$(PREFIX)/bin/buildiso-testing
+
 	install -dm0755 $(DESTDIR)$(PREFIX)/lib/artools
 	install -m0644 ${LIBS_ISO} $(DESTDIR)$(PREFIX)/lib/artools
 
@@ -147,20 +166,9 @@ install_iso:
 
 	install -m0755 ${CPIO} $(DESTDIR)$(SYSCONFDIR)/initcpio
 
-
 	install -dm0755 $(DESTDIR)$(PREFIX)/share/artools
 	install -m0644 ${SHARED_ISO} $(DESTDIR)$(PREFIX)/share/artools
 
-install_yaml:
-	install -dm0755 $(DESTDIR)$(PREFIX)/bin
-	install -m0755 ${BIN_YAML} $(DESTDIR)$(PREFIX)/bin
-
-	install -dm0755 $(DESTDIR)$(PREFIX)/lib/artools
-	install -m0644 ${LIBS_YAML} $(DESTDIR)$(PREFIX)/lib/artools
-
-	install -dm0755 $(DESTDIR)$(PREFIX)/share/artools
-	install -m0644 ${SHARED_YAML} $(DESTDIR)$(PREFIX)/share/artools
-
 uninstall_base:
 	for f in ${SYSCONF}; do rm -f $(DESTDIR)$(SYSCONFDIR)/artools/$$f; done
 	for f in ${BIN_BASE}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$f; done
@@ -168,16 +176,24 @@ uninstall_base:
 	for f in ${LIBS_BASE}; do rm -f $(DESTDIR)$(PREFIX)/lib/artools/$$f; done
 
 uninstall_pkg:
-	for f in ${LIST_PKG}; do rm -f $(DESTDIR)$(SYSCONFDIR)/artools/pkg.list.d/$$f; done
 	for f in ${LIST_IMPORT}; do rm -f $(DESTDIR)$(SYSCONFDIR)/artools/import.list.d/$$f; done
-	for f in ${ARCH_CONF}; do rm -f $(DESTDIR)$(SYSCONFDIR)/artools/make.conf.d/$$f; done
 	for f in ${BIN_PKG}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$f; done
 	rm -f $(DESTDIR)$(PREFIX)/bin/find-libprovides
+	rm -f $(DESTDIR)$(PREFIX)/bin/buildpkg-testing
 	for f in ${SHARED_PKG}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/$$f; done
+	for f in ${PATCHES}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/patches/$$f; done
 	for f in ${LIBS_PKG}; do rm -f $(DESTDIR)$(PREFIX)/lib/artools/$$f; done
 
+uninstall_isobase:
+	for f in ${BASE}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/$$f; done
+	for f in ${LIVE_ETC}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc/$$f; done
+	for f in ${LIVE_ETC_DEFAULT}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc/default/$$f; done
+	for f in ${LIVE_ETC_PAM}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc/pam.d/$$f; done
+	for f in ${LIVE_ETC_SUDOERS}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/iso-profiles/base/live-overlay/etc/sudoers.d/$$f; done
+
 uninstall_iso:
 	for f in ${BIN_ISO}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$f; done
+	rm -f $(DESTDIR)$(PREFIX)/bin/buildiso-testing
 	for f in ${SHARED_ISO}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/$$f; done
 
 	for f in ${LIBS_ISO}; do rm -f $(DESTDIR)$(PREFIX)/lib/artools/$$f; done
@@ -185,14 +201,9 @@ uninstall_iso:
 	for f in ${CPIOINST}; do rm -f $(DESTDIR)$(SYSCONFDIR)/initcpio/install/$$f; done
 	for f in ${CPIO}; do rm -f $(DESTDIR)$(SYSCONFDIR)/initcpio/$$f; done
 
-uninstall_yaml:
+install: install_base install_pkg install_iso install_isobase
-	for f in ${BIN_YAML}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$f; done
-	for f in ${LIBS_YAML}; do rm -f $(DESTDIR)$(PREFIX)/lib/artools/$$f; done
-	for f in ${SHARED_YAML}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/$$f; done
 
-install: install_base install_pkg install_iso install_yaml
+uninstall: uninstall_base uninstall_pkg uninstall_iso uninstall_isobase
-
-uninstall: uninstall_base uninstall_pkg uninstall_iso uninstall_yaml
 
 dist:
 	git archive --format=tar --prefix=artools-$(Version)/ $(Version) | gzip -9 > artools-$(Version).tar.gz

README.md

@@ -31,16 +31,12 @@ By default it is commented and shows just initialization values done in code.
 Tools configuration is done in artools.conf or by args.
 Specifying args will override artools.conf settings.
 
-User build lists(eg 'my-super-build.list') can be placed in
-
 ~~~
-$HOME/.config/artools/pkg.list.d
+$HOME/.config/artools/import.list.d
-$HOME/.config/artools/iso.list.d
 ~~~
 
 overriding
 
 ~~~
-/etc/artools/pkg.list.d
+/etc/artools/import.list.d
-/etc/artools/iso.list.d
 ~~~

bin/basestrap.in

@@ -25,6 +25,8 @@ newroot=/mnt
 hostcache=false
 copykeyring=true
 copymirrorlist=true
+directory=false
+interactive=false
 
 usage() {
     echo "usage: ${0##*/} [options] root [packages...]"
@@ -67,9 +69,9 @@ check_root
 newroot=$1; shift
 pacman_args=("${@:-base}")
 
-${hostcache} && pacman_args+=(--cachedir="$newroot/var/cache/pacman/pkg")
+${hostcache} || pacman_args+=(--cachedir="$newroot/var/cache/pacman/pkg")
 
-${interactive} && pacman_args+=(--noconfirm)
+${interactive} || pacman_args+=(--noconfirm)
 
 [[ -n $pacman_conf ]] && pacman_args+=(--config="$pacman_conf")
 

bin/buildiso.in

@@ -19,13 +19,41 @@ SYSCONFDIR='@sysconfdir@'
 import ${LIBDIR}/util.sh
 import ${LIBDIR}/util-iso.sh
 
+prepare_build(){
+    timer_start=$(get_timer)
+
+    load_profile "${profile}"
+
+    netgroups=${netgroups_url}/netgroups-${initsys}.yaml
+
+    local pacman_conf pac_file="pacman.conf"
+
+    case "${stablility}" in
+        'testing') pac_file="pacman-${stablility}.conf" ;;
+    esac
+
+    pacman_conf="${DATADIR}/$pac_file"
+    [[ -f $AT_USERCONFDIR/$pac_file ]] && pacman_conf="$AT_USERCONFDIR/$pac_file"
+
+    iso_file=$(gen_iso_fn).iso
+
+    mkchroot_args+=(-C ${pacman_conf})
+    work_dir=${chroots_iso}/${profile}/${target_arch}
+
+    iso_dir="${iso_pool}/${profile}"
+
+    iso_root=${chroots_iso}/${profile}/iso
+    mnt_dir=${chroots_iso}/${profile}/mnt
+    prepare_dir "${mnt_dir}"
+    prepare_dir "${iso_dir}"
+}
+
 show_profile(){
-    prepare_build
     msg2 "iso_file: %s" "${iso_file}"
     if ${verbose};then
         msg2 "autologin: %s" "${autologin}"
 
-        msg2 "netgroups: %s" "$(get_yaml)"
+        msg2 "netgroups: %s" "${netgroups}"
 
         msg2 "hostname: %s" "${hostname}"
         msg2 "username: %s" "${username}"
@@ -36,7 +64,6 @@ show_profile(){
         msg2 "openrc_boot: %s" "${openrc_boot[*]}"
         msg2 "openrc_default: %s" "${openrc_default[*]}"
     fi
-    reset_profile
 }
 
 display_settings(){
@@ -45,10 +72,10 @@ display_settings(){
 
     msg "OPTIONS:"
     msg2 "profile: %s" "${profile}"
-    msg2 "arch: %s" "${target_arch}"
     msg2 "initsys: %s" "${initsys}"
     msg2 "kernel: %s" "${kernel}"
     [[ -n ${gpgkey} ]] && msg2 "gpgkey: %s" "${gpgkey}"
+    msg2 "stablility: %s" "${stablility}"
 
     msg "ARGS:"
     msg2 "clean_first: %s" "${clean_first}"
@@ -56,21 +83,52 @@ display_settings(){
     msg2 "iso_only: %s" "${iso_only}"
     msg2 "persist: %s" "${persist}"
 
-    msg "DIST SETTINGS:"
+    msg "ISO SETTINGS:"
-    msg2 "dist_name: %s" "${dist_name}"
+    msg2 "iso_version: %s" "${iso_version}"
-    msg2 "dist_release: %s" "${dist_release}"
-    msg2 "dist_branding: %s" "${dist_branding}"
 
     msg "BUILD:"
     show_profile
 }
 
+build(){
+    msg "Start building [%s]" "${profile}"
+    if ${clean_first};then
+        for copy in "${work_dir}"/*; do
+            [[ -d $copy ]] || continue
+            msg2 "Deleting chroot copy '%s'..." "$(basename "${copy}")"
+
+            lock 9 "$copy.lock" "Locking chroot copy '%s'" "$copy"
+
+            subvolume_delete_recursive "${copy}"
+            rm -rf --one-file-system "${copy}"
+        done
+        lock_close 9
+
+        rm -rf --one-file-system "${work_dir}"
+        clean_iso_root "${iso_root}"
+    fi
+
+    if ${iso_only}; then
+        [[ ! -d ${work_dir} ]] && die "Create images: buildiso -p %s -x" "${profile}"
+        compress_images
+        exit 1
+    fi
+    if ${images_only}; then
+        prepare_images
+        warning "Continue compress: buildiso -p %s -zc ..." "${profile}"
+        exit 1
+    else
+        prepare_images
+        compress_images
+    fi
+    msg "Finished building [%s]" "${profile}"
+    show_elapsed_time "${FUNCNAME}" "${timer_start}"
+}
+
 load_user_info
 
 load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
 
-load_run_dir
-
 clean_first=true
 pretend=false
 images_only=false
@@ -79,15 +137,16 @@ verbose=false
 persist=false
 
 mkchroot_args=()
+cmd=${0##*/}
+stablility=${cmd##*-}
 
 usage() {
     echo "Usage: ${0##*/} [options]"
     echo "    -p <profile>       Profile [default: ${profile}]"
-    echo "    -a <arch>          Arch [default: ${target_arch}]"
     echo '    -r <dir>           Chroots directory'
     echo "                       [default: ${chroots_iso}]"
     echo '    -t <dir>           Target directory'
-    echo "                       [default: ${cache_dir_iso}]"
+    echo "                       [default: ${iso_pool}]"
     echo '    -k <name>          Kernel to use'
     echo "                       [default: ${kernel}]"
     echo '    -i <name>          Init system to use'
@@ -109,14 +168,13 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='p:a:r:t:k:i:g:czxmvqh'
+opts='p:r:t:k:i:g:czxmvqh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
         p) profile="$OPTARG" ;;
-        a) target_arch="$OPTARG" ;;
         r) chroots_iso="$OPTARG" ;;
-        t) cache_dir_iso="$OPTARG" ;;
+        t) iso_pool="$OPTARG" ;;
         k) kernel="$OPTARG" ;;
         i) initsys="$OPTARG" ;;
         g) gpgkey="$OPTARG" ;;
@@ -135,7 +193,9 @@ shift $(($OPTIND - 1))
 
 check_root
 
-check_requirements
+prepare_traps
+
+prepare_build
 
 ${pretend} && display_settings && exit 1
 

bin/buildpkg.in

@@ -21,10 +21,8 @@ SYSCONFDIR='@sysconfdir@'
 import ${LIBDIR}/util.sh
 import ${LIBDIR}/util-chroot.sh
 import ${LIBDIR}/util-pkg.sh
-import ${LIBDIR}/util-pkg-chroot.sh
 
 show_pkg(){
-    check_build "$1"
     cd $1
         source PKGBUILD
         for n in ${pkgname[@]}; do
@@ -38,27 +36,14 @@ display_settings(){
     show_config
 
     msg "OPTIONS:"
-    msg2 "arch: %s" "${target_arch}"
-    msg2 "repository: %s" "${repository}"
     msg2 "chroots_pkg: %s" "${chroots_pkg}"
+    msg2 "repository: %s" "${repository}"
+    msg2 "stablility: %s" "${stablility}"
 
     msg "ARGS:"
     msg2 "create_first: %s" "${create_first}"
-    msg2 "delete_first: %s" "${delete_first}"
+    msg2 "makepkg_args: %s" "${makepkg_args[*]}"
-    msg2 "clean_first: %s" "${clean_first}"
+    msg2 "mkchrootpkg_args: %s" "${mkchrootpkg_args[*]}"
-    msg2 "update_first: %s" "${update_first}"
-    msg2 "namcap: %s" "${namcap}"
-    msg2 "sign: %s" "${sign}"
-    msg2 "repo_add: %s" "${repo_add}"
-    msg2 "copy_pkg: %s" "${copy_pkg}"
-
-    msg "PATHS:"
-    msg2 "pkg_dir: %s" "${pkg_dir}"
-
-    if ${create_first};then
-        msg "PKG:"
-        msg2 "packages: %s" "${packages[*]}"
-    fi
 
     msg "BUILD:"
     show_pkg "${package}"
@@ -67,110 +52,92 @@ display_settings(){
 load_user_info
 
 load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
 
 create_first=false
-delete_first=false
-clean_first=false
-update_first=false
-namcap=false
 pretend=false
-sign=false
+lib32=false
-is_multilib=false
-repo_add=false
-copy_pkg=false
 
 mkchroot_args=()
-mkchrootpkg_args=()
+mkchrootpkg_args=(-c -n)
-deploypkg_args=(-x)
 
 install_pkgs=()
-repository=${PWD##*/}
+
 package=''
+cmd=${0##*/}
+stablility=${cmd##*-}
+repository=${PWD##*/}
+base_devel=('base-devel')
 
 prepare_build(){
-    local pac_arch='default'
+    local pac_file='pacman.conf' mp_file='makepkg.conf'
 
-    if [[ "${target_arch}" == 'multilib' ]];then
+    case "${stablility}" in
-        pac_arch='multilib'
+        'testing') pac_file="pacman-${stablility}.conf" ;;
-        is_multilib=true
+    esac
-    fi
 
-    local pacman_conf="${DATADIR}/pacman-$pac_arch.conf"
+    ${lib32} && base_devel+=('multilib-devel')
-    [[ -f $AT_USERCONFDIR/pacman-$pac_arch.conf ]] && pacman_conf="$AT_USERCONFDIR/pacman-$pac_arch.conf"
+
+    local pacman_conf="${DATADIR}/$pac_file"
+    [[ -f $AT_USERCONFDIR/$pac_file ]] && pacman_conf="$AT_USERCONFDIR/$pac_file"
 
     work_dir="${chroots_pkg}/${repository}-${target_arch}"
-    pkg_dir="${cache_dir_pkg}/${repository}-${target_arch}"
 
-    local makepkg_conf=$(get_makepkg_conf "${target_arch}")
+    local makepkg_conf="${DATADIR}/$mp_file"
+    [[ -f $AT_USERCONFDIR/$mp_file ]] && makepkg_conf="$AT_USERCONFDIR/$mp_file"
 
-    [[ "$pac_arch" == 'multilib' ]] && target_arch='x86_64'
+    mkchroot_args+=(-C "${pacman_conf}" -M "${makepkg_conf}" "${work_dir}/root")
 
-    mkchroot_args+=(-C ${pacman_conf} -M ${makepkg_conf})
+    mkchrootpkg_args+=(-r "${work_dir}" "${makepkg_args[@]}")
-
-    mkchrootpkg_args+=(-r ${work_dir})
-    deploypkg_args+=(-r ${repository})
-
-    prepare_dir "${pkg_dir}"
-
-    prepare_dir "${work_dir}"
-
-    packages=('base-devel')
-    ${is_multilib} && packages+=('multilib-devel')
 
     timer_start=$(get_timer)
 }
 
+build(){
+    local timer_start=$(get_timer)
+    if [[ -f ${package}/PKGBUILD ]];then
+        cd ${package}
+    else
+        die "Directory must contain a PKGBUILD!"
+    fi
+    msg "Start building [%s] (%s)" "${package}" "${repository}"
+    exec mkchrootpkg "${mkchrootpkg_args[@]}"
+    show_elapsed_time "${FUNCNAME}" "${timer_start}"
+}
+
 usage() {
-    echo "Usage: ${0##*/} [options]"
+    echo "Usage: ${0##*/} [options] -- [makepkg_args]"
     echo "    -p <pkg>           Package to build [default: ${package}]"
-    echo "    -a <arch>          Arch [default: ${target_arch}]"
+    echo "    -r <dir>           Chroots directory [default: ${chroots_pkg}]"
-    echo '    -r <dir>           Chroots directory'
+    echo '    -z <repo>          Repo name'
-    echo "                       [default: ${chroots_pkg}]"
+    echo '    -c                 Create root chroot'
-    echo '    -i <pkgs>          Install packages into the working copy of the chroot'
+    echo '    -m                 Multilib chroot'
-    echo "    -z <repo>          The repo name to add the package(s) [default: ${repository}]"
-    echo '    -o                 Create chroot'
-    echo '    -d                 Delete chroot'
-    echo '    -c                 Clean chroot copy'
-    echo '    -u                 Update chroot copy'
-    echo '    -x                 Add the package(s) to the repo'
-    echo '    -l                 Copy the package(s) to the repo instead of symlink'
-    echo '    -n                 Install and run namcap check'
-    echo '    -s                 Sign packages'
     echo '    -q                 Query settings and pretend build'
     echo '    -h                 This help'
     echo ''
+    echo "Default makepkg_args args: ${makepkg_args[*]}"
     echo ''
     exit $1
 }
 
 orig_argv=("$0" "$@")
 
-opts='p:a:r:i:z:oldcunsxqh'
+opts='p:r:z:cmqh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
         p) package="$OPTARG" ;;
-        a) target_arch="$OPTARG" ;;
         r) chroots_pkg="$OPTARG" ;;
-        i) install_pkgs+=("$OPTARG"); mkchrootpkg_args+=(-I "${install_pkgs[*]}") ;;
         z) repository="$OPTARG" ;;
-        o) create_first=true ;;
+        c) create_first=true ;;
-        d) delete_first=true ;;
+        m) lib32=true ;;
-        c) clean_first=true ; mkchrootpkg_args+=(-c) ;;
-        u) update_first=true ; mkchrootpkg_args+=(-u) ;;
-        x) repo_add=true ;;
-        l) copy_pkg=true; deploypkg_args+=(-c) ;;
-        n) namcap=true; mkchrootpkg_args+=(-n) ;;
-        s) sign=true ;;
         q) pretend=true ;;
         h|?) usage 0 ;;
         *) echo "invalid argument '%s'" "${arg}"; usage 1 ;;
     esac
 done
 
-shift $(($OPTIND - 1))
+# shift $(($OPTIND - 1))
+makepkg_args+=("${@:$OPTIND}")
 
 check_root
 
@@ -178,8 +145,28 @@ prepare_build
 
 ${pretend} && display_settings && exit
 
-${delete_first} && delete_chroot "${work_dir}/root" "${work_dir}"
+if ${create_first} || [[ ! -d ${work_dir}/root ]];then
+    msg "Creating chroot for [%s] (%s)..." "${repository}" "${target_arch}"
 
-${create_first} && create_chroot "${mkchroot_args[@]}" "${work_dir}/root" "${packages[@]}"
+    for copy in "${work_dir}"/*; do
+        [[ -d $copy ]] || continue
+        msg2 "Deleting chroot copy '%s'..." "$(basename "${copy}")"
+
+        lock 9 "$copy.lock" "Locking chroot copy '%s'" "$copy"
+
+        subvolume_delete_recursive "${copy}"
+        rm -rf --one-file-system "${copy}"
+    done
+    lock_close 9
+
+    rm -rf --one-file-system "${work_dir}"
+    mkdir -p "${work_dir}"
+    setarch "${target_arch}" mkchroot \
+        "${mkchroot_args[@]}"  "${base_devel[@]}" || abort
+else
+    lock 9 "${work_dir}/root.lock" "Locking clean chroot"
+    chroot-run "${mkchroot_args[@]}" \
+        pacman -Syu --noconfirm || abort
+fi
 
 build "${package}"

bin/buildtree.in

@@ -13,64 +13,59 @@ version=@version@
 
 LIBDIR='@libdir@'
 SYSCONFDIR='@sysconfdir@'
+DATADIR='@datadir@'
 
 [[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
 import ${LIBDIR}/util.sh
+import ${LIBDIR}/util-pkg.sh
 import ${LIBDIR}/util-pkg-tree.sh
 
-show_imports(){
-    for repo in ${repo_tree_import[@]};do
-        read_import_list "$repo"
-        for p in ${import_list[@]};do
-            msg2 "%s: %s" ""$repo "$p"
-        done
-    done
-}
-
 display_settings(){
     show_version
     show_config
 
     msg "REPOS:"
+    msg2 "repo_tree_artix: %s" "${repo_tree_artix[*]}"
     msg2 "repo_tree_arch: %s" "${repo_tree_arch[*]}"
-    msg2 "repo_tree_import: %s" "${repo_tree_import[*]}"
+
+    msg "OPTIONS:"
+    msg2 "repository: %s" "${repository}"
 
     msg "ARGS:"
-    msg2 "verbose: %s" "${verbose}"
     msg2 "artix: %s" "${artix}"
     msg2 "arch: %s" "${arch}"
+    msg2 "compare: %s" "${compare}"
     msg2 "import_arch: %s" "${import_arch}"
+#     msg2 "gitpush: %s" "${gitpush}"
 
     msg "PATHS:"
     msg2 "tree_dir_artix: %s" "${tree_dir_artix}"
     msg2 "tree_dir_arch: %s" "${tree_dir_arch}"
-
+    msg2 "patches_dir: %s" "${patches_dir}/${repository}"
-    if ${verbose}; then
-        if ${import_arch};then
-            msg "IMPORT QUEUE:"
-            show_imports
-        fi
-    fi
 }
 
 load_user_info
 
 load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
 
-artix=false
 pretend=false
 arch=false
+artix=false
+compare=false
 import_arch=false
-verbose=false
+# gitpush=false
+repository='system' #${PWD##*/}
 
-rsync_args=(-aWx --progress --delete --no-R --no-implied-dirs)
+rsync_args=(-aWxvci --progress --delete-before --no-R --no-implied-dirs)
 
 usage() {
     echo "Usage: ${0##*/} [options]"
-    echo "    -x            Sync artix import tree"
+    echo "    -r <repo>     Repository [default:${repository}]"
     echo "    -a            Sync arch tree"
+    echo "    -s            Sync artix tree"
+    echo "    -c            Compare artix and arch versions"
     echo '    -i            Import arch packages'
-    echo '    -v            Verbose import output'
+#     echo '    -p            Push import packages'
     echo '    -q            Query settings'
     echo '    -h            This help'
     echo ''
@@ -80,14 +75,17 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='xaivqh'
+# opts='r:aipscqh'
+opts='r:aiscqh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
-        x) artix=true ;;
+        r) repository="$OPTARG" ;;
         a) arch=true ;;
+        s) artix=true ;;
+        c) compare=true ;;
         i) import_arch=true ;;
-        v) verbose=true; rsync_args+=(-v --stats) ;;
+#         p) gitpush=true ;;
         q) pretend=true ;;
         h|?) usage 0 ;;
         *) echo "invalid argument '${arg}'"; usage 1 ;;
@@ -98,6 +96,7 @@ shift $(($OPTIND - 1))
 
 prepare_dir "${tree_dir_artix}"
 prepare_dir "${tree_dir_arch}"
+prepare_dir "${patches_dir}/${repository}"
 
 ${pretend} && display_settings && exit 1
 
@@ -105,4 +104,6 @@ ${artix} && sync_tree_artix
 
 ${arch} && sync_tree_arch
 
-${import_arch} && import_from_arch
+${compare} && show_version_table "${repository}"
+
+${import_arch} && import_from_arch "${repository}" #"${gitpush}"

bin/buildyaml.in

@@ -1,114 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-version=@version@
-
-LIBDIR='@libdir@'
-DATADIR='@datadir@'
-SYSCONFDIR='@sysconfdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-yaml-check.sh
-import ${LIBDIR}/util-profile.sh
-
-show_profile(){
-    prepare_build
-    msg2 "yaml_dir: %s" "${yaml_dir}"
-    msg2 "autologin: %s" "${autologin}"
-
-    msg2 "netgroups: %s" "$(get_yaml)"
-
-    msg2 "hostname: %s" "${hostname}"
-    msg2 "username: %s" "${username}"
-    msg2 "password: %s" "${password}"
-    msg2 "addgroups: %s" "${addgroups}"
-
-    msg2 "enable_live: %s" "${enable_live[*]}"
-    msg2 "openrc_boot: %s" "${openrc_boot[*]}"
-    msg2 "openrc_default: %s" "${openrc_default[*]}"
-
-    reset_profile
-    unset yaml_dir
-}
-
-display_settings(){
-    show_version
-    show_config
-
-    msg "OPTIONS:"
-    msg2 "profile: %s" "${profile}"
-    msg2 "arch: %s" "${target_arch}"
-    msg2 "initsys: %s" "${initsys}"
-    msg2 "kernel: %s" "${kernel}"
-
-    msg "ARGS:"
-    msg2 "calamares: %s" "${calamares}"
-    msg2 "group: %s" "${group}"
-
-    msg "BUILD:"
-    show_profile
-}
-
-load_user_info
-
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-
-# to force old way to have buildiso run in iso-profiles dir
-# run_dir=$(pwd)
-
-load_run_dir
-
-calamares=false
-pretend=false
-group=false
-cache_dir_netinstall="${workspace_dir}/netinstall"
-
-usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo "    -p <profile>       Buildset or profile [default: ${profile}]"
-    echo "    -a <arch>          Arch [default: ${target_arch}]"
-    echo "    -k <name>          Kernel to use[default: ${kernel}]"
-    echo "    -i <name>          Init system to use [default: ${initsys}]"
-    echo '    -c                 Check also calamares yaml files generated for the profile'
-    echo '    -g                 Enable pacman group accepted for -p'
-    echo '    -q                 Query settings'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
-    exit $1
-}
-
-orig_argv=("$0" "$@")
-
-opts='p:a:i:k:gcqh'
-
-while getopts "${opts}" arg; do
-    case "${arg}" in
-        p) profile="$OPTARG" ;;
-        a) target_arch="$OPTARG" ;;
-        i) initsys="$OPTARG" ;;
-        k) kernel="$OPTARG" ;;
-        c) calamares=true ;;
-        g) group=true ;;
-        q) pretend=true ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
-    esac
-done
-
-shift $(($OPTIND - 1))
-
-${pretend} && display_settings && exit 1
-
-${group} && write_pacman_group_yaml "${profile}" && exit 0
-
-build

bin/checkpkg.in

@@ -14,6 +14,7 @@ version=@version@
 LIBDIR='@libdir@'
 
 [[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
+import ${LIBDIR}/util.sh
 import ${LIBDIR}/util-pkg.sh
 
 shopt -s extglob

bin/chroot-run.in

@@ -15,6 +15,7 @@ LIBDIR='@libdir@'
 
 [[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
 import ${LIBDIR}/util.sh
+import ${LIBDIR}/util-chroot.sh
 import ${LIBDIR}/util-mount.sh
 
 working_dir=''
@@ -91,6 +92,7 @@ copy_hostconf () {
 
 chroot_extra_mount() {
     chroot_mount "/etc/resolv.conf" "$1/etc/resolv.conf" -B
+    chroot_mount_conditional "[[ -e $1/etc/machine-id ]]" "/etc/machine-id" "$1/etc/machine-id" -B
     chroot_mount "${cache_dirs[0]}" "$1${cache_dirs[0]}" -B
 
     for cache_dir in ${cache_dirs[@]:1}; do
@@ -126,3 +128,9 @@ eval $(grep '^CARCH=' "$working_dir/etc/makepkg.conf")
 ${nosetarch} && unset CARCH
 
 ${CARCH:+setarch "$CARCH"} chroot "${working_dir}" "$@"
+
+ret=$?
+
+kill_chroot_process "${working_dir}"
+
+exit $ret

bin/deployiso.in

@@ -25,7 +25,6 @@ display_settings(){
     msg "OPTIONS:"
     msg2 "profile: %s" "${profile}"
     msg2 "uplimit: %s kB/s" "${uplimit}"
-#     msg2 "dist_release: %s" "${dist_release}"
 
     msg "ARGS:"
     msg2 "update: %s" "${update}"
@@ -41,7 +40,7 @@ display_settings(){
 
     msg "REMOTE:"
     msg2 "account: %s" "${account}"
-    msg2 "host: %s" "${host}"
+    msg2 "file_host: %s" "${file_host}"
     msg2 "project: %s" "${project}"
 
     msg "UPLOAD:"
@@ -79,7 +78,7 @@ opts='p:l:uvtqh'
 while getopts "${opts}" arg; do
     case "${arg}" in
         p) profile="$OPTARG" ;;
-        l) limit="$OPTARG" ;;
+        l) uplimit="$OPTARG" ;;
         u) update=true; rsync_args+=(-u) ;;
         t) torrent=true ;;
         v) verbose=true; rsync_args+=(-v --stats) ;;

bin/deploypkg.in

@@ -18,66 +18,48 @@ SYSCONFDIR='@sysconfdir@'
 import ${LIBDIR}/util.sh
 import ${LIBDIR}/util-pkg-publish.sh
 
-show_transfer(){
-    local repo="$1"
-    msg2 "local: %s" "${repos_local}/$repo/"
-    msg2 "remote: %s" "${repos_remote}/$repo/"
-}
-
 display_settings(){
     show_version
     show_config
 
     msg "OPTIONS:"
     msg2 "repository: %s" "${repository}"
-    msg2 "package: %s" "${package}"
+    msg2 "to_repository: %s" "${to_repository}"
+    msg2 "package: %s" "${package[@]}"
     msg2 "target_arch: %s" "${target_arch}"
 
     msg "ARGS:"
     msg2 "add_pkg: %s" "${add_pkg}"
     msg2 "del_pkg: %s" "${del_pkg}"
-    msg2 "copy_pkg: %s" "${copy_pkg}"
+    msg2 "move_pkg: %s" "${move_pkg}"
-    msg2 "download: %s" "${download}"
-    msg2 "upload: %s" "${upload}"
-    msg2 "verbose: %s" "${verbose}"
-
-    msg "REMOTE:"
-    msg2 "account: %s" "${account}"
-    msg2 "host: %s" "${host}"
-    msg2 "project: %s" "${project}"
-
-    msg "SYNC:"
-    show_transfer "${repository}"
 }
 
 load_user_info
 
 load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
+load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
+load_vars /etc/makepkg.conf
 
 pretend=false
-upload=false
-download=false
-verbose=false
-verbose=false
 add_pkg=false
 del_pkg=false
-copy_pkg=false
+move_pkg=false
 package=''
+repository=${PWD##*/}
+to_repository=${PWD##*/}
 
 rsync_args=(-rtxisP --progress --delete -e ssh)
 
 usage() {
     echo "Usage: ${0##*/} [options]"
     echo "    -a                 Repository arch [default:${target_arch}]"
-    echo "    -r                 Repository to sync [default:${repository}]"
+    echo "    -r                 Repository [default:${repository}]"
-    echo "    -u                 Upload repository"
+    echo "    -t                 Repository to move to [default:${to_repository}]"
-    echo '    -d                 Download repository'
     echo "    -p                 Package name to add/delete"
     echo '    -x                 Add package to repository'
-    echo '    -c                 Copy instead of symlink package to repository'
     echo '    -y                 Delete package from repository'
+    echo '    -m                 Move packages from source to destination repository'
     echo '    -q                 Query settings and pretend upload'
-    echo '    -v                 Verbose output'
     echo '    -h                 This help'
     echo ''
     echo ''
@@ -86,20 +68,18 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='p:a:r:xyducvqh'
+opts='p:a:r:t:xymqh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
         a) target_arch="$OPTARG" ;;
         r) repository="$OPTARG" ;;
         p) package="$OPTARG" ;;
+        t) to_repository="$OPTARG" ;;
+        m) move_pkg=true ;;
         x) add_pkg=true ;;
         y) del_pkg=true ;;
-        c) copy_pkg=true ;;
+        q) pretend=true ;;
-        d) download=true ;;
-        u) upload=true; rsync_args+=(-L) ;;
-        v) verbose=true; rsync_args+=(-v --stats) ;;
-        q) pretend=true; rsync_args+=(-n) ;;
         h|?) usage 0 ;;
         *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
@@ -109,12 +89,14 @@ shift $(($OPTIND - 1))
 
 timer_start=$(get_timer)
 
-prepare_dir "${repos_local}"
+prepare_dir "${repos_root}"
 
-${pretend} && display_settings #&& exit 1
+${pretend} && display_settings && exit 1
 
-${add_pkg} && repo_update "${repository}" "${target_arch}" "${package}" "add" "${copy_pkg}"
+${move_pkg} && move_to_repo "${repository}" "${to_repository}" "${target_arch}"
-${del_pkg} && repo_update "${repository}" "${target_arch}" "${package}" "remove"
 
-${download} && repo_download "${repository}"
+${del_pkg} && del_from_repo "${repository}" "${target_arch}" "${package}"
-${upload} && repo_upload "${repository}"
+
+${add_pkg} && add_to_repo "${repository}" "${target_arch}" "${package}"
+
+exit 0

bin/findupdates.in

@@ -0,0 +1,53 @@
+#!/bin/bash
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+version=@version@
+
+LIBDIR='@libdir@'
+
+[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
+
+import ${LIBDIR}/util.sh
+import ${LIBDIR}/util-pkg.sh
+import ${LIBDIR}/util-pkg-tree.sh
+
+load_user_info
+
+load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
+
+declare -A UPDATES
+msg_table_header "%-30s %-30s %-30s %-30s" "Repository" "Package" "Artix version" "Arch version"
+for repo in ${repo_tree_artix[@]}; do
+    for pkg in ${tree_dir_artix}/$repo/*; do
+        if [[ -f $pkg/PKGBUILD ]];then
+            source $pkg/PKGBUILD 2>/dev/null
+            package=${pkg##*/}
+            artixver=$(get_full_version $package)
+            src=$(get_import_path "$repo" "$package")
+            if [[ -f $src/PKGBUILD ]];then
+                source $src/PKGBUILD 2>/dev/null
+                archver=$(get_full_version $package)
+            fi
+            if [ $(vercmp $artixver $archver) -lt 0 ];then
+                UPDATES[$package]="$src/PKGBUILD $pkg/PKGBUILD"
+                msg_row_update "%-30s %-30s %-30s %-30s" "$repo" "$package" "$artixver" "$archver"
+            else
+                msg_row "%-30s %-30s %-30s %-30s" "$repo" "$package" "$artixver" "$archver"
+            fi
+        fi
+        unset pkgver epoch pkgrel artixver archver package
+    done
+done
+
+for upd in "${!UPDATES[@]}"; do
+    msg "Diff: %s" "$upd"
+    diff -u ${UPDATES[$upd]}
+done

bin/fstabgen.in

@@ -64,6 +64,13 @@ optstring_apply_quirks() {
     # one might install Arch from a Fedora environment), so let's remove it.
     optstring_remove_option "$varname" seclabel
 
+    # Prune 'relatime' option for any pseudofs. This seems to be a rampant
+    # default which the kernel often exports even if the underlying filesystem
+    # doesn't support it. Example: https://bugs.archlinux.org/task/54554.
+    if awk -v fstype="$fstype" '$1 == fstype { exit 1 }' /proc/filesystems; then
+        optstring_remove_option "$varname" relatime
+    fi
+
     case $fstype in
         f2fs)
         # These are Kconfig options for f2fs. Kernels supporting the options will

bin/lddd.in

@@ -21,15 +21,15 @@ IFS="${IFS}:"
 libdirs="/lib /usr/lib /usr/local/lib $(cat /etc/ld.so.conf.d/*)"
 extras=
 
-TMPDIR=$(mktemp -d --tmpdir lddd-script.XXXX)
+TEMPDIR=$(mktemp -d --tmpdir lddd-script.XXXX)
 
 msg 'Go out and drink some tea, this will take a while :) ...'
 #  Check ELF binaries in the PATH and specified dir trees.
 for tree in $PATH $libdirs $extras; do
-    msg2 "DIR $tree"
+    msg2 "DIR %s" "$tree"
 
     #  Get list of files in tree.
-    files=$(find $tree -type f ! -name '*.a' ! -name '*.la' ! -name '*.py*' ! -name '*.txt' ! -name '*.h' ! -name '*.ttf' ! \
+    files=$(find "$tree" -type f ! -name '*.a' ! -name '*.la' ! -name '*.py*' ! -name '*.txt' ! -name '*.h' ! -name '*.ttf' ! \
     -name '*.rb' ! -name '*.ko' ! -name '*.pc' ! -name '*.enc' ! -name '*.cf' ! -name '*.def' ! -name '*.rules' ! -name \
     '*.cmi' ! -name  '*.mli' ! -name '*.ml' ! -name '*.cma' ! -name '*.cmx' ! -name '*.cmxa' ! -name '*.pod' ! -name '*.pm' \
     ! -name '*.pl' ! -name '*.al' ! -name '*.tcl' ! -name '*.bs' ! -name '*.o' ! -name '*.png' ! -name '*.gif' ! -name '*.cmo' \
@@ -37,22 +37,22 @@ for tree in $PATH $libdirs $extras; do
     -name '*.mcopclass' ! -name '*.mcoptype')
     IFS=$ifs
     for i in $files; do
-        if (( $(file $i | grep -c 'ELF') != 0 )); then
+        if (( $(file "$i" | grep -c 'ELF') != 0 )); then
             #  Is an ELF binary.
-            if (( $(ldd $i 2>/dev/null | grep -c 'not found') != 0 )); then
+            if (( $(ldd "$i" 2>/dev/null | grep -c 'not found') != 0 )); then
                 #  Missing lib.
-                echo "$i:" >> $TMPDIR/raw.txt
+                echo "$i:" >> "$TEMPDIR/raw.txt"
-                ldd $i 2>/dev/null | grep 'not found' >> $TMPDIR/raw.txt
+                ldd "$i" 2>/dev/null | grep 'not found' >> "$TEMPDIR/raw.txt"
             fi
         fi
     done
 done
-grep '^/' $TMPDIR/raw.txt | sed -e 's/://g' >> $TMPDIR/affected-files.txt
+grep '^/' "$TEMPDIR/raw.txt" | sed -e 's/://g' >> "$TEMPDIR/affected-files.txt"
 # invoke pacman
-for i in $(cat $TMPDIR/affected-files.txt); do
+while read -r i; do
-    pacman -Qo $i | awk '{print $4,$5}' >> $TMPDIR/pacman.txt
+    pacman -Qo "$i" | awk '{print $4,$5}' >> "$TEMPDIR/pacman.txt"
-done
+done < "$TEMPDIR/affected-files.txt"
 # clean list
-sort -u $TMPDIR/pacman.txt >> $TMPDIR/possible-rebuilds.txt
+sort -u "$TEMPDIR/pacman.txt" >> "$TEMPDIR/possible-rebuilds.txt"
 
-msg "Files saved to $TMPDIR"
+msg "Files saved to %s" "$TEMPDIR"

bin/mkchrootpkg.in

@@ -19,29 +19,6 @@ import ${LIBDIR}/util-chroot.sh
 
 shopt -s nullglob
 
-init_variables() {
-    default_makepkg_args=(--syncdeps --noconfirm --log --holdver --skipinteg)
-    makepkg_args=("${default_makepkg_args[@]}")
-    repack=false
-    update_first=false
-    clean_first=false
-    run_namcap=false
-    temp_chroot=false
-    chrootdir=
-    passeddir=
-    makepkg_user=
-    declare -ga install_pkgs
-    declare -gi ret=0
-
-    bindmounts_ro=()
-    bindmounts_rw=()
-
-    copy=$USER
-    [[ -n ${SUDO_USER:-} ]] && copy=$SUDO_USER
-    [[ -z "$copy" || $copy = root ]] && copy=copy
-    src_owner=${SUDO_USER:-$USER}
-}
-
 usage() {
     echo "Usage: ${0##*/} [options] -r <chrootdir> [--] [makepkg args]"
     echo ' Run this script in a PKGBUILD dir to build a package inside a'
@@ -121,24 +98,24 @@ sync_chroot() {
 }
 
 # Usage: delete_chroot $copydir [$copy]
-# delete_chroot() {
+delete_chroot() {
-#     local copydir=$1
+    local copydir=$1
-#     local copy=${1:-$2}
+    local copy=${1:-$2}
-#
+
-#     stat_busy "Removing chroot copy [%s]" "$copy"
+    stat_busy "Removing chroot copy [%s]" "$copy"
-#     if is_btrfs "$chrootdir" && ! mountpoint -q "$copydir"; then
+    if is_btrfs "$chrootdir" && ! mountpoint -q "$copydir"; then
-#         subvolume_delete_recursive "$copydir" ||
+        subvolume_delete_recursive "$copydir" ||
-#             die "Unable to delete subvolume %s" "$copydir"
+            die "Unable to delete subvolume %s" "$copydir"
-#     else
+    else
-#         # avoid change of filesystem in case of an umount failure
+        # avoid change of filesystem in case of an umount failure
-#         rm --recursive --force --one-file-system "$copydir" ||
+        rm --recursive --force --one-file-system "$copydir" ||
-#             die "Unable to delete %s" "$copydir"
+            die "Unable to delete %s" "$copydir"
-#     fi
+    fi
-#
+
-#     # remove lock file
+    # remove lock file
-#     rm -f "$copydir.lock"
+    rm -f "$copydir.lock"
-#     stat_done
+    stat_done
-# }
+}
 
 # Usage: install_packages $copydir $pkgs...
 install_packages() {
@@ -159,17 +136,17 @@ install_packages() {
     return $ret
 }
 
-# Usage: prepare_chroot $copydir $HOME $repack $run_namcap
+# Usage: prepare_chroot $copydir $HOME $keepbuilddir $run_namcap
 # Globals:
 #  - MAKEFLAGS
 #  - PACKAGER
 prepare_chroot() {
     local copydir=$1
     local USER_HOME=$2
-    local repack=$3
+    local keepbuilddir=$3
     local run_namcap=$4
 
-    $repack || rm -rf "$copydir/build"
+    $keepbuilddir || rm -rf "$copydir/build"
 
     local builduser_uid="${SUDO_UID:-$UID}"
     local builduser_gid="$(id -g "$builduser_uid")"
@@ -221,6 +198,7 @@ EOF
 # These functions aren't run in makechrootpkg,
 # so no global variables
 _chrootbuild() {
+    exec </dev/console
     export LANG=en_US.UTF-8
     . /etc/profile
     sudo -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
@@ -292,7 +270,26 @@ move_products() {
 orig_argv=("$0" "$@")
 
 main() {
-    init_variables
+    default_makepkg_args=(--syncdeps --noconfirm --log --holdver --skipinteg)
+    makepkg_args=("${default_makepkg_args[@]}")
+    keepbuilddir=false
+    update_first=false
+    clean_first=false
+    run_namcap=false
+    temp_chroot=false
+    chrootdir=
+    passeddir=
+    makepkg_user=
+    declare -ga install_pkgs
+    declare -gi ret=0
+
+    bindmounts_ro=()
+    bindmounts_rw=()
+
+    copy=$USER
+    [[ -n ${SUDO_USER:-} ]] && copy=$SUDO_USER
+    [[ -z "$copy" || $copy = root ]] && copy=copy
+    src_owner=${SUDO_USER:-$USER}
 
     local opts='hcur:I:l:nTD:d:U:'
 
@@ -332,13 +329,13 @@ main() {
     # Pass all arguments after -- right to makepkg
     makepkg_args+=("${@:$OPTIND}")
 
-    # See if -R was passed to makepkg
+    # See if -R or -e was passed to makepkg
-    for arg in "${@:OPTIND}"; do
+    for arg in "${makepkg_args[@]}"; do
         case ${arg%%=*} in
-            -*R*|--repackage)
+            --repackage|--noextract) keepbuilddir=true; break ;;
-                repack=true
+            --repackage|--noextract) keepbuilddir=true; break ;;
-                break 2
+            --*) ;;
-                ;;
+            -*R*|-*e*) keepbuilddir=true; break ;;
         esac
     done
 
@@ -379,7 +376,7 @@ main() {
 
     download_sources "$copydir" "$src_owner"
 
-    prepare_chroot "$copydir" "$USER_HOME" "$repack" "$run_namcap"
+    prepare_chroot "$copydir" "$USER_HOME" "$keepbuilddir"
 
     bindmounts_rw+=("${PWD}:/startdir" "${SRCDEST}:/srcdest")
 

bin/signfile.in

@@ -21,10 +21,16 @@ load_user_info
 load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
 load_vars /etc/makepkg.conf
 
+file_to_sign="$1"
+
 if [ ! -e "$1" ]; then
-    error "%s does not exist!" "$1"
+    error "%s does not exist!" "$file_to_sign"
     exit 1
 fi
 
-msg2 "Signing [%s] with key %s" "${1##*/}" "${GPGKEY}..."
+msg2 "Signing [%s] with key %s" "${file_to_sign##*/}" "${GPGKEY}..."
-gpg --detach-sign --use-agent -u "${GPGKEY}" "$1"
+if [[ -n "${BUILDBOT_GPGP}" ]]; then
+    gpg --batch --passphrase "${BUILDBOT_GPGP}" --detach-sign "$file_to_sign"
+else
+    gpg --detach-sign --use-agent -u "${GPGKEY}" "$file_to_sign"
+fi

bin/signpkgs.in

@@ -1,14 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-version=@version@
-
-find $PWD -maxdepth 1 -name '*.pkg.tar.xz' -exec signfile {} \;

data/artools.conf

@@ -2,14 +2,58 @@
 ################ artools-base ###############
 #############################################
 
-# default taget arch: auto detect
-# target_arch=$(uname -m)
-
 # build dir where buildpkg or buildiso chroots are created
 # chroots_dir=/var/lib/artools
 
-# custom build mirror server
+# the workspace directory
-# build_mirror=https://netcologne.dl.sourceforge.net/project/artix-linux/repos
+# workspace_dir="/home/${OWNER}/artools-workspace"
+
+#############################################
+################ artools-pkg ################
+#############################################
+
+# artix package tree
+# repo_tree_artix=('system' 'world' 'galaxy' 'lib32')
+
+# host_tree_artix='https://github.com/artix-linux'
+
+# archlinux package tree
+# repo_tree_arch=('packages' 'community')
+
+# host_tree_arch=git://projects.archlinux.org/svntogit
+
+# default repos root
+# repos_root=${workspace_dir}/repos
+
+#############################################
+################ artools-iso ################
+#############################################
+
+# the iso storage directory
+# iso_pool="${workspace_dir}/iso"
+
+# the dist release; default: auto
+# iso_version=$(date +%Y%m%d)
+
+# possible values: openrc, (s6, runit) not yet supported
+# initsys="openrc"
+
+# unset defaults to given value
+# kernel="linux-lts"
+
+# custom additional kernel args
+# kernel_args=""
+
+# gpg key; leave empty or commented to skip sfs signing
+# gpgkey=""
+
+# set upload bandwidth limit in kB/s
+# uplimit=100
+
+# the torrent tracker urls, comma separated
+# tracker_url='udp://mirror.strits.dk:6969'
+
+# file_host="sourceforge.net"
 
 # the server user
 # account=[SetUser]
@@ -20,54 +64,5 @@
 # host mirrors
 # host_mirrors=('netcologne' 'freefr' 'netix' 'kent' '10gbps-io')
 
-# the workspace directory
-# workspace_dir="/home/${OWNER}/artools-workspace"
-
-#############################################
-################ artools-pkg ################
-#############################################
-
-# artix import tree
-# repo_tree_import=('system-arch' 'world-arch' 'galaxy-arch')
-
-# host_tree_artix=https://github.com/artix-linux
-
-# archlinux package tree
-# repo_tree_arch=('packages' 'community')
-
-# host_tree_arch=git://projects.archlinux.org/svntogit
-
-# default repos root
-# repos_local=${workspace_dir}/repos
-
-#############################################
-################ artools-iso ################
-#############################################
-
-# the default profile
-# profile=base
-
-# the dist release; default: auto
-# dist_release=rolling
-
-# the branding; default: auto
-# dist_branding="ARTIX"
-
-# possible values: openrc, (s6, runit) not yet supported
-# initsys="openrc"
-
-# unset defaults to given value
-# kernel="linux-lts"
-
-# gpg key; leave empty or commented to skip sfs signing
-# gpgkey=""
-
-# set upload bandwidth limit in kB/s
-# limit=100
-
-# the torrent tracker urls, comma separated
-# tracker_url='udp://mirror.strits.dk:6969'
-
 # Piece size, 2^n
 # piece_size=21
-

data/base/Packages-Live

@@ -0,0 +1,8 @@
+mkinitcpio-nfs-utils
+nbd
+>openrc artix-live-openrc
+squashfs-tools
+artix-live-portable-efi
+virtualbox-guest-modules-artix
+virtualbox-guest-utils
+linux-lts-headers

data/base/Packages-Root

@@ -0,0 +1,84 @@
+acpi
+b43-fwcutter
+bash
+btrfs-progs
+bzip2
+coreutils
+crda
+dhclient
+diffutils
+dmraid
+dnsmasq
+dosfstools
+e2fsprogs
+ecryptfs-utils
+exfat-utils
+f2fs-tools
+file
+filesystem
+findutils
+gawk
+gcc-libs
+gettext
+glibc
+grep
+grub
+gzip
+inetutils
+#intel-ucode
+iproute2
+iptables
+iputils
+ipw2100-fw
+ipw2200-fw
+jfsutils
+KERNEL
+less
+licenses
+linux-firmware
+logrotate
+lsb-release
+man-db
+man-pages
+memtest86+
+mkinitcpio-openswap
+nano
+net-tools
+ntfs-3g
+>openrc acpid-openrc
+>openrc cronie-openrc
+>openrc cryptsetup-openrc
+>openrc dbus-openrc
+>openrc device-mapper-openrc
+>openrc dhcpcd-openrc
+>openrc elogind-openrc
+>openrc haveged-openrc
+>openrc lvm2-openrc
+>openrc mdadm-openrc
+>openrc netifrc
+>openrc nfs-utils-openrc
+>openrc rsync-openrc
+>openrc wpa_supplicant-openrc
+>openrc opentmpfiles
+os-prober
+pacman
+pciutils
+pcmciautils
+perl
+procps-ng
+psmisc
+reiserfsprogs
+sed
+shadow
+s-nail
+sudo
+sysfsutils
+tar
+texinfo
+usbutils
+util-linux
+which
+efibootmgr
+xfsprogs
+zd1211-firmware
+zsh

data/base/live-overlay/etc/default/grub

@@ -0,0 +1,49 @@
+GRUB_DEFAULT=saved
+GRUB_TIMEOUT=5
+GRUB_DISTRIBUTOR="Artix"
+GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
+GRUB_CMDLINE_LINUX=""
+
+# If you want to enable the save default function, uncomment the following
+# line, and set GRUB_DEFAULT to saved.
+GRUB_SAVEDEFAULT=true
+
+# Preload both GPT and MBR modules so that they are not missed
+GRUB_PRELOAD_MODULES="part_gpt part_msdos"
+
+# Uncomment to enable Hidden Menu, and optionally hide the timeout count
+#GRUB_HIDDEN_TIMEOUT=5
+#GRUB_HIDDEN_TIMEOUT_QUIET=true
+
+# Uncomment to use basic console
+GRUB_TERMINAL_INPUT=console
+
+# Uncomment to disable graphical terminal
+#GRUB_TERMINAL_OUTPUT=console
+
+# The resolution used on graphical terminal
+# note that you can use only modes which your graphic card supports via VBE
+# you can see them in real GRUB with the command `vbeinfo'
+GRUB_GFXMODE=auto
+
+# Uncomment to allow the kernel use the same resolution used by grub
+GRUB_GFXPAYLOAD_LINUX=keep
+
+# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
+# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
+#GRUB_DISABLE_LINUX_UUID=true
+
+# Uncomment to disable generation of recovery mode menu entries
+GRUB_DISABLE_RECOVERY=true
+
+# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
+# modes only.  Entries specified as foreground/background.
+GRUB_COLOR_NORMAL="light-gray/black"
+GRUB_COLOR_HIGHLIGHT="cyan/black"
+
+# Uncomment one of them for the gfx desired, a image background or a gfxtheme
+GRUB_BACKGROUND="/usr/share/grub/background.png"
+#GRUB_THEME="/path/to/gfxtheme"
+
+# Uncomment to get a beep at GRUB start
+#GRUB_INIT_TUNE="480 440 1"

data/base/live-overlay/etc/fstab

@@ -0,0 +1,5 @@
+#
+# /etc/fstab: static file system information
+#
+# <file system>        <dir>         <type>    <options>          <dump> <pass>
+/dev/mapper/root-image /             auto      defaults           0      0

data/base/live-overlay/etc/issue

@@ -0,0 +1,13 @@
+
+Artix Live ISO (\l) - \s-\r \m
+
+
+
+# Welcome to Artix #
+
+
+login for the live environment:
+    user     'artix'
+    password 'artix'
+
+

data/base/live-overlay/etc/pam.d/su

@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+auth		sufficient	pam_wheel.so trust use_uid
+auth		required	pam_unix.so
+account		required	pam_unix.so
+session		required	pam_unix.so

data/base/live-overlay/etc/sudoers.d/g_wheel

@@ -0,0 +1 @@
+%wheel  ALL=(ALL) NOPASSWD: ALL

data/base/profile.conf

@@ -1,7 +1,3 @@
-##########################################
-###### use this file in the profile ######
-##########################################
-
 ################ install ################
 
 # default displaymanager: none
@@ -15,16 +11,18 @@
 # openrc_boot=('elogind')
 # openrc_default=('acpid' 'bluetooth' 'cronie' 'cupsd' 'dbus' 'syslog-ng' 'NetworkManager')
 
-# unset defaults to given values
+# default values
 # addgroups="video,power,storage,optical,network,lp,scanner,wheel,users"
 
+# netgroups_url="https://raw.githubusercontent.com/artix-linux/netgroups/master"
+
 ################# live-session #################
 
-# unset defaults to given value
+# default value
 # hostname="artix"
 
-# unset defaults to given value
+# default value
 # username="artix"
 
-# unset defaults to given value
+# default value
 # password="artix"

data/import.list.d/galaxy-arch.list

@@ -1,6 +0,0 @@
-autoconf-archive
-confuse
-libappindicator
-libdbusmenu
-libftdi
-libindicator

data/import.list.d/galaxy.list

@@ -0,0 +1,34 @@
+autoconf-archive
+cmocka
+confuse
+dovecot
+hub
+hwinfo
+jansson
+libappindicator
+libbson
+libdbi
+libdbusmenu
+libftdi
+libindicator
+libmongoc
+libnewt
+libpgm
+libreplaygain
+libsass
+libsodium
+libx86emu
+ninja
+pigeonhole
+portaudio
+sassc
+yaml-cpp
+zeromq
+acpi_call
+r8168
+tp_smapi
+acpi_call-lts
+r8168-lts
+tp_smapi-lts
+virtualbox
+virtualbox-guest-iso

data/import.list.d/lib32.list

@@ -0,0 +1,2 @@
+lib32-fakeroot
+lib32-libltdl

data/import.list.d/system.list

@@ -1,60 +1,37 @@
-acl
+tzdata
-archlinux-keyring
+iana-etc
+linux-api-headers
+binutils
+glibc
+gcc
 attr
+acl
+ncurses
+readline
+bash
+sed
+diffutils
+expat
+db
+lz4
+lzo
+bzip2
+gmp
+mpfr
+m4
+gdbm
+xz
+zlib
+file
+zstd
+icu
+perl
+openssl
+openssl-1.0
 autoconf
 automake
-b43-fwcutter
-binutils
-bison
-bridge-utils
-bzip2
-ca-certificates
-ca-certificates-cacert
-coreutils
-cracklib
-curl
 dash
-db
+bison
-dialog
-diffutils
-ding-libs
-dnssec-anchors
-dosfstools
-e2fsprogs
-ed
-efibootmgr
-efivar
-elfutils
-expat
-fakeroot
-file
-findutils
-flex
-gawk
-gcc
-gdbm
-gettext
-glib2
-gmp
-gnutls
-gpgme
-grep
-groff
-gzip
-hdparm
-hwids
-iana-etc
-icu
-ifenslave
-iproute2
-iputils
-ipw2100-fw
-ipw2200-fw
-isdn4k-utils
-iw
-jfsutils
-kbd
-keyutils
 ldns
 less
 libaio
@@ -68,6 +45,7 @@ libgcrypt
 libgpg-error
 libgssglue
 libidn
+libidn2
 libksba
 libmnl
 libmpc
@@ -77,6 +55,7 @@ libnl
 libpcap
 libpipeline
 libpsl
+libidn2
 librpcsecgss
 libseccomp
 libsecret
@@ -85,19 +64,49 @@ libtasn1
 libtirpc
 libtool
 libunistring
-licenses
+pcre
+glib2
+grep
+gzip
+bridge-utils
+ca-certificates
+ca-certificates-cacert
+coreutils
+cracklib
+dialog
+ding-libs
+dnssec-anchors
+dosfstools
+e2fsprogs
+ed
+efibootmgr
+efivar
+elfutils
+fakeroot
+findutils
+flex
+gawk
+gettext
+gnutls
+gpgme
+groff
+hdparm
+hwids
+ifenslave
+iproute2
+iputils
+iw
+jfsutils
+kbd
+keyutils
+#licenses
 links
-linux-api-headers
 linux-atm
 linux-firmware
-lz4
-lzo
-m4
 make
 man-pages
 mkinitcpio-busybox
 mkinitcpio-nfs-utils
-mpfr
 nano
 nettle
 net-tools
@@ -106,13 +115,9 @@ nilfs-utils
 npth
 nspr
 nss
-openssl
-openssl-1.0
 p11-kit
 patch
 pciutils
-pcre
-perl
 pinentry
 pkcs11-helper
 pkg-config
@@ -124,8 +129,7 @@ pth
 reiserfsprogs
 run-parts
 sdparm
-sed
+# s-nail
-s-nail
 sqlite
 sysfsutils
 syslinux
@@ -133,7 +137,6 @@ tar
 texinfo
 thin-provisioning-tools
 traceroute
-tzdata
 usbutils
 vi
 which
@@ -141,5 +144,12 @@ wireless-regdb
 wireless_tools
 wpa_actiond
 xfsprogs
-xz
 zd1211-firmware
+archlinux-keyring
+b43-fwcutter
+ipw2100-fw
+ipw2200-fw
+isdn4k-utils
+curl
+sudo
+argon2

data/import.list.d/world-arch.list

@@ -1,212 +0,0 @@
-qt5-3d
-qt5-canvas3d
-qt5-charts
-qt5-connectivity
-qt5-datavis3d
-qt5-declarative
-qt5-doc
-qt5-examples
-qt5-gamepad
-qt5-graphicaleffects
-qt5-imageformats
-qt5-location
-qt5-multimedia
-qt5-networkauth
-qt5-quickcontrols
-qt5-quickcontrols2
-qt5-remoteobjects
-qt5-script
-qt5-scxml
-qt5-sensors
-qt5-serialbus
-qt5-serialport
-qt5-speech
-qt5-svg
-qt5-tools
-qt5-translations
-qt5-virtualkeyboard
-qt5-wayland
-qt5-webchannel
-qt5-webengine
-qt5-webkit
-qt5-websockets
-qt5-webview
-qt5-x11extras
-qt5-xmlpatterns
-adwaita-icon-theme
-alsa-lib
-apr
-apr-util
-atk
-at-spi2-atk
-at-spi2-core
-boost
-cairo
-cantarell-fonts
-check
-compositeproto
-damageproto
-dbus-glib
-dconf
-desktop-file-utils
-docbook-dsssl
-docbook-sgml31
-docbook-utils
-docbook-xml
-docbook-xsl
-double-conversion
-doxygen
-eventlog
-fixesproto
-fontconfig
-fontsproto
-freetype2
-gd
-gdk-pixbuf2
-ghostscript
-giflib
-gnome-common
-gobject-introspection
-gptfdisk
-graphite
-graphviz
-gsfonts
-gtk3
-gtk-doc
-gts
-harfbuzz
-hicolor-icon-theme
-ijs
-inputproto
-intltool
-itstool
-jasper
-jbig2dec
-json-glib
-kbproto
-lcms2
-libasyncns
-libblockdev
-libbytesize
-libcap-ng
-libcroco
-libdaemon
-libdatrie
-libdrm
-libepoxy
-libexif
-libfontenc
-libglvnd
-libgphoto2
-libical
-libice
-libieee1284
-libimobiledevice
-libiscsi
-libjpeg-turbo
-libomxil-bellagio
-libpaper
-libpciaccess
-libplist
-libpng
-libproxy
-librsvg
-libsm
-libthai
-libtiff
-libtxc_dxtn
-libunwind
-libusb-compat
-libusbmuxd
-libwebp
-libx11
-libxau
-libxaw
-libxcb
-libxcomposite
-libxcursor
-libxdamage
-libxdmcp
-libxext
-libxfixes
-libxfont
-libxfont2
-libxft
-libxi
-libxinerama
-libxkbcommon
-libxkbfile
-libxml2
-libxmu
-libxpm
-libxrandr
-libxrender
-libxshmfence
-libxslt
-libxt
-libxtst
-libxxf86vm
-lirc
-llvm
-mesa
-mtdev
-net-snmp
-openjade
-opensp
-pango
-parted
-pcre2
-perl-error
-perl-xml-parser
-perl-yaml
-pixman
-python2
-python
-python-appdirs
-python-beaker
-python-mako
-python-markupsafe
-python-packaging
-python-pyparsing
-python-setuptools
-python-six
-randrproto
-recordproto
-renderproto
-serf
-sgml-common
-shared-mime-info
-source-highlight
-speexdsp
-tslib
-v4l-utils
-vala
-valgrind
-volume_key
-vte3
-vte
-wayland
-wayland-protocols
-xcb-proto
-xcb-util
-xcb-util-image
-xcb-util-keysyms
-xcb-util-renderutil
-xcb-util-wm
-xextproto
-xf86vidmodeproto
-xineramaproto
-xkeyboard-config
-xorg-bdftopcf
-xorg-fonts-alias
-xorg-fonts-encodings
-xorg-fonts-misc
-xorg-font-util
-xorg-font-utils
-xorg-mkfontdir
-xorg-mkfontscale
-xorg-setxkbmap
-xorg-xkbcomp
-xproto
-yelp-tools
-yelp-xsl

data/import.list.d/world.list

@@ -0,0 +1,525 @@
+a52dec
+aalib
+adwaita-icon-theme
+alsa-firmware
+alsa-lib
+#alsa-utils
+apr
+apr-util
+aspell
+assimp
+atk
+at-spi2-atk
+at-spi2-core
+babl
+bc
+boost
+brltty
+cairo
+cantarell-fonts
+cdparanoia
+check
+cifs-utils
+cln
+cmake
+extra-cmake-modules
+compositeproto
+convertlit
+cpio
+damageproto
+dbus-glib
+dbus-python
+dcadec
+dconf
+desktop-file-utils
+dkms
+docbook-dsssl
+docbook-sgml31
+docbook-utils
+docbook-xml
+docbook-xsl
+dotconf
+double-conversion
+doxygen
+ebook-tools
+editorconfig-core-c
+exiv2
+faad2
+ffmpeg
+ffmpeg2.8
+fftw
+fixesproto
+flac
+fontconfig
+fontsproto
+freetype2
+fribidi
+fuse2
+fuse3
+gamin
+gc
+gcab
+gconf
+gcr
+gd
+gdb
+gdk-pixbuf2
+gegl02
+ghostscript
+giblib
+giflib
+glade
+glib-networking
+glu
+gnome-common
+gobject-introspection
+gperf
+gperftools
+gptfdisk
+grantlee
+graphite
+graphviz
+gsettings-desktop-schemas
+gsfonts
+gsm
+gst-plugins-base
+gst-plugins-good
+gstreamer
+gtk2
+gtk3
+gtk-doc
+gtksourceview3
+gts
+guile
+guile2.0
+harfbuzz
+hicolor-icon-theme
+hunspell
+hyphen
+ijs
+ilmbase
+imagemagick
+imlib2
+iniparser
+inputproto
+intltool
+iso-codes
+itstool
+jack
+jasper
+java8-openjdk
+java-common
+jbig2dec
+jemalloc
+js
+# json-c
+jsoncpp
+json-glib
+kbproto
+lame
+lapack
+lcms
+lcms2
+ldb
+libaccounts-glib
+libaccounts-qt
+libao
+libass
+libasyncns
+libatomic_ops
+libavc1394
+libbluray
+libbsd
+libburn
+libbytesize
+libcaca
+libcanberra
+libcap-ng
+libcddb
+libcdio
+libcdio-paranoia
+# libconfig
+libcroco
+libcue
+libdaemon
+libdatrie
+libdbusmenu-qt
+libdca
+libdmtx
+libdrm
+libdv
+libdvbpsi
+libdvdcss
+libdvdnav
+libdvdread
+libebml
+libepoxy
+libevdev
+libexif
+libfontenc
+libgee
+libgit2
+libglade
+libglvnd
+libgphoto2
+libgusb
+libical
+libice
+libid3tag
+libiec61883
+libieee1284
+libimobiledevice
+libiscsi
+libisoburn
+libisofs
+libjpeg-turbo
+liblouis
+liblqr
+libmad
+libmatroska
+libmng
+libmodplug
+libmpeg2
+libmspack
+libmtp
+libndp
+libnotify
+# libogg
+libomxil-bellagio
+libpaper
+libpciaccess
+libplist
+libpng
+libproxy
+libpwquality
+libqalculate
+libqmi
+libraqm
+# libraw1394
+librsvg
+libsamplerate
+libshout
+libsigc++
+libsigsegv
+libsm
+# libsndfile
+libsoup
+libsoxr
+libspiro
+libsrtp
+libssh
+libtar
+# libthai
+libtheora
+libtiff
+libtommath
+libtxc_dxtn
+libunwind
+libupnp
+libusb-compat
+libusbmuxd
+libutempter
+libuv
+libva
+libvdpau
+libvisual
+libvorbis
+libvpx
+libwebp
+libwmf
+libx11
+# libxau
+libxaw
+# libxcb
+libxcomposite
+libxcursor
+libxdamage
+# libxdmcp
+libxext
+libxfixes
+libxfont2
+libxft
+libxi
+libxinerama
+libxkbcommon
+libxkbfile
+libxml2
+libxmu
+libxpm
+libxrandr
+libxrender
+libxres
+libxshmfence
+libxslt
+libxss
+libxt
+libxtst
+libxv
+libxvmc
+libxxf86vm
+libyaml
+libzip
+lirc
+llvm
+lmdb
+lua
+mesa
+# meson
+mailcap
+mobile-broadband-provider-info
+mtdev
+muparser
+musepack
+namcap
+nasm
+network-manager-applet
+noto-fonts
+nss-mdns
+ntfs-3g
+# nvidia
+# nvidia-settings
+# nvidia-utils
+ocl-icd
+openal
+opencore-amr
+openexr
+openjade
+openjpeg
+openjpeg2
+opensp
+opus
+orc
+orca
+pango
+parted
+pcre2
+perl-error
+perl-file-which
+perl-xml-parser
+perl-yaml
+phonon
+phonon-gstreamer
+pixman
+polkit-qt
+poppler
+potrace
+protobuf
+pyalpm
+pygobject
+pygtk
+# pylint
+pyqt5
+python
+python2
+# python2-backports
+# python2-backports.functools_lru_cache
+# python2-configparser
+# python2-ipaddress
+python-appdirs
+python-asn1crypto
+# python-astroid
+python-attrs
+# python-automat
+python-beaker
+python-cairo
+# python-cffi
+python-chardet
+# python-constantly
+# python-cryptography
+python-cssselect
+python-defusedxml
+# python-editdistance
+# python-egenix-mx-base
+python-evdev
+# python-feedparser
+# python-fpconst
+# python-gdata
+# python-geoip
+python-hyperlink
+python-idna
+# python-incremental
+# python-isort
+# python-iwscan
+# python-lazy-object-proxy
+# python-lxml
+python-mako
+python-markupsafe
+# python-mccabe
+# python-mpd
+# python-nose
+python-notify
+python-numpy
+python-packaging
+python-pip
+python-ply
+python-pyasn1
+# python-pyasn1-modules
+# python-pycparser
+# python-pycurl
+python-pyelftools
+# python-pygame
+python-pyparsing
+# python-rdflib
+# python-requests
+# python-retrying
+# python-service-identity
+python-setuptools
+python-six
+# python-soappy
+# python-telepathy
+# python-urllib3
+python-urwid
+python-virtualenv
+# python-wpactrl
+python-wrapt
+# python-wstools
+pyxdg
+qt5-3d
+qt5-canvas3d
+qt5-charts
+qt5-connectivity
+qt5-datavis3d
+qt5-declarative
+qt5-doc
+qt5-examples
+qt5-gamepad
+qt5-graphicaleffects
+qt5-imageformats
+qt5-location
+qt5-multimedia
+qt5-networkauth
+qt5-quickcontrols
+qt5-quickcontrols2
+qt5-remoteobjects
+qt5-script
+qt5-scxml
+qt5-sensors
+qt5-serialbus
+qt5-serialport
+qt5-speech
+qt5-svg
+qt5-tools
+qt5-translations
+qt5-virtualkeyboard
+qt5-wayland
+qt5-webchannel
+qt5-webengine
+qt5-webkit
+qt5-websockets
+qt5-webview
+qt5-x11extras
+qt5-xmlpatterns
+randrproto
+recordproto
+renderproto
+ruby
+schroedinger
+scrnsaverproto
+sdl
+sdl2
+sdl_image
+sdl_sound
+serf
+sgml-common
+shared-mime-info
+slang
+snappy
+snowball
+socat
+source-highlight
+speech-dispatcher
+speex
+speexdsp
+startup-notification
+t1lib
+taglib
+talloc
+tcl
+tdb
+tevent
+texlive-bin
+texlive-core
+texlive-formatsextra
+texlive-latexextra
+texlive-pictures
+texlive-science
+tslib
+ttf-bitstream-vera
+ttf-dejavu
+ttf-hack
+ttf-indic-otf
+unixodbc
+unzip
+#usbmuxd
+v4l-utils
+vala
+valgrind
+videoproto
+vid.stab
+volume_key
+vte
+vte3
+wavpack
+wayland
+wayland-protocols
+webrtc-audio-processing
+wget
+whois
+wxgtk
+x265
+xapian-core
+xbitmaps
+# xcb-proto
+# xcb-util
+xcb-util-cursor
+# xcb-util-image
+# xcb-util-keysyms
+# xcb-util-renderutil
+# xcb-util-wm
+xdg-utils
+xextproto
+xf86-input-libinput
+xf86-video-dummy
+xf86-video-fbdev
+xf86-video-sisusb
+xf86-video-vesa
+xf86-video-vmware
+xf86-video-voodoo
+xf86vidmodeproto
+xineramaproto
+xkeyboard-config
+xmlto
+xorg-bdftopcf
+xorg-fonts-alias
+xorg-fonts-encodings
+xorg-fonts-misc
+xorg-font-util
+xorg-font-utils
+xorg-luit
+xorg-mkfontdir
+xorg-mkfontscale
+xorg-setxkbmap
+xorg-twm
+xorg-util-macros
+xorg-xauth
+xorg-xinit
+xorg-xkbcomp
+xorg-xmessage
+xorg-xmodmap
+xorg-xprop
+xorg-xrandr
+xorg-xrdb
+xorg-xset
+xorg-xsetroot
+# xproto
+xterm
+xvidcore
+yajl
+yelp-tools
+yelp-xsl
+zip
+zita-alsa-pcmi
+zita-resampler
+zsh
+zvbi
+zziplib

data/linux.preset

@@ -1,14 +0,0 @@
-# mkinitcpio preset file for the 'linux' package
-
-ALL_config="/etc/mkinitcpio.conf"
-ALL_kver="/boot/vmlinuz-@kernel@-@arch@"
-
-PRESETS=('default' 'fallback')
-
-#default_config="/etc/mkinitcpio.conf"
-default_image="/boot/initramfs-@kernel@-@arch@.img"
-#default_options=""
-
-#fallback_config="/etc/mkinitcpio.conf"
-fallback_image="/boot/initramfs-@kernel@-@arch@-fallback.img"
-fallback_options="-S autodetect"

data/make.conf.d/i686.conf

@@ -1,3 +0,0 @@
-carch="i686"
-chost="i686-pc-linux-gnu"
-cflags="-march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong"

data/make.conf.d/multilib.conf

@@ -1,3 +0,0 @@
-carch="x86_64"
-chost="x86_64-pc-linux-gnu"
-cflags="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong"

data/make.conf.d/x86_64.conf

@@ -1,3 +0,0 @@
-carch="x86_64"
-chost="x86_64-pc-linux-gnu"
-cflags="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong"

data/makepkg.conf

@@ -20,26 +20,26 @@ DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %
 # /usr/bin/wget
 
 #-- The package required by makepkg to download VCS sources
-# Format: 'protocol::package'
+#  Format: 'protocol::package'
 VCSCLIENTS=('bzr::bzr'
-	    'git::git'
+            'git::git'
-	    'hg::mercurial'
+            'hg::mercurial'
-	    'svn::subversion')
+            'svn::subversion')
 
 #########################################################################
 # ARCHITECTURE, COMPILE FLAGS
 #########################################################################
 #
-CARCH="@CARCH@"
+CARCH="x86_64"
-CHOST="@CHOST@"
+CHOST="x86_64-pc-linux-gnu"
 
 #-- Compiler and Linker Flags
 # -march (or -mcpu) builds exclusively for an architecture
 # -mtune optimizes for an architecture, but builds for whole processor family
 CPPFLAGS="-D_FORTIFY_SOURCE=2"
-CFLAGS="@CFLAGS@"
+CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"
-CXXFLAGS="@CFLAGS@"
+CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"
-LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
+LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 #-- Debugging flags
@@ -50,10 +50,9 @@ DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
 # BUILD ENVIRONMENT
 #########################################################################
 #
-# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
+# Defaults: BUILDENV=(!distcc color !ccache check !sign)
 #  A negated environment option will do the opposite of the comments below.
 #
-#-- fakeroot: Allow building packages as a non-root user
 #-- distcc:   Use the Distributed C/C++/ObjC compiler
 #-- color:    Colorize output messages
 #-- ccache:   Use ccache to cache compilation
@@ -85,6 +84,7 @@ BUILDENV=(!distcc color !ccache check !sign)
 #-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
 #-- purge:      Remove files specified by PURGE_TARGETS
 #-- upx:        Compress binary executable files using UPX
+#-- optipng:    Optimize PNG images with optipng
 #-- debug:      Add debugging flags as specified in DEBUG_* variables
 #
 OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !optipng !upx !debug)

data/mkinitcpio.conf

@@ -1,3 +1,5 @@
-MODULES="loop dm-snapshot"
+MODULES=(loop dm-snapshot)
-HOOKS="base udev artix_shutdown artix artix_loop_mnt artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs artix_kms modconf block pcmcia filesystems keyboard keymap"
+
+HOOKS=(base udev artix_shutdown artix artix_loop_mnt artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs artix_kms modconf block pcmcia filesystems keyboard keymap)
+
 COMPRESSION="xz"

data/pacman-testing.conf

@@ -64,26 +64,53 @@ LocalFileSigLevel = Optional
 # The header [repo-name] is crucial - it must be present and
 # uncommented to enable the repo.
 
+[system-testing]
+Include = /etc/pacman.d/mirrorlist
+
 [system]
 Include = /etc/pacman.d/mirrorlist
 
+[world-testing]
+Include = /etc/pacman.d/mirrorlist
+
 [world]
 Include = /etc/pacman.d/mirrorlist
 
+[galaxy-testing]
+Include = /etc/pacman.d/mirrorlist
+
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the lib32 repositories as required here.
+
+[lib32-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[lib32]
+Include = /etc/pacman.d/mirrorlist
+
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
 
-# [core]
+[testing]
-# Include = /etc/pacman.d/mirrorlist-arch
+Include = /etc/pacman.d/mirrorlist-arch
 
 [extra]
 Include = /etc/pacman.d/mirrorlist-arch
 
+[community-testing]
+Include = /etc/pacman.d/mirrorlist-arch
+
 [community]
 Include = /etc/pacman.d/mirrorlist-arch
+
+[multilib-testing]
+Include = /etc/pacman.d/mirrorlist-arch
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist-arch

data/pacman.conf

@@ -74,10 +74,10 @@ Include = /etc/pacman.d/mirrorlist
 Include = /etc/pacman.d/mirrorlist
 
 # If you want to run 32 bit applications on your x86_64 system,
-# enable the multilib repositories as required here.
+# enable the lib32 repositories as required here.
 
-[multilib]
+[lib32]
-Include = /etc/pacman.d/mirrorlist-arch
+Include = /etc/pacman.d/mirrorlist
 
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
@@ -85,11 +85,11 @@ Include = /etc/pacman.d/mirrorlist-arch
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
 
-# [core]
-# Include = /etc/pacman.d/mirrorlist-arch
-
 [extra]
 Include = /etc/pacman.d/mirrorlist-arch
 
 [community]
 Include = /etc/pacman.d/mirrorlist-arch
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist-arch

data/patches/artix-bashrc.patch

@@ -0,0 +1,49 @@
+--- /dev/null
++++ b/bash/artix.bashrc
+@@ -0,0 +1,46 @@
++use_color=true
++
++# Set colorful PS1 only on colorful terminals.
++# dircolors --print-database uses its own built-in database
++# instead of using /etc/DIR_COLORS.  Try to use the external file
++# first to take advantage of user additions.  Use internal bash
++# globbing instead of external grep binary.
++safe_term=${TERM//[^[:alnum:]]/?}   # sanitize TERM
++match_lhs=""
++[[ -f ~/.dir_colors   ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
++[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
++[[ -z ${match_lhs}    ]] \
++	&& type -P dircolors >/dev/null \
++	&& match_lhs=$(dircolors --print-database)
++[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true
++
++if ${use_color} ; then
++	# Enable colors for ls, etc.  Prefer ~/.dir_colors #64489
++	if type -P dircolors >/dev/null ; then
++		if [[ -f ~/.dir_colors ]] ; then
++			eval $(dircolors -b ~/.dir_colors)
++		elif [[ -f /etc/DIR_COLORS ]] ; then
++			eval $(dircolors -b /etc/DIR_COLORS)
++		fi
++	fi
++
++	if [[ ${EUID} == 0 ]] ; then
++		PS1='\[\033[01;31m\][\h\[\033[01;36m\] \W\[\033[01;31m\]]\$\[\033[00m\] '
++	else
++		PS1='\[\033[01;36m\][\u@\h\[\033[01;37m\] \W\[\033[01;36m\]]\$\[\033[00m\] '
++	fi
++
++	alias ls='ls --color=auto'
++	alias grep='grep --colour=auto'
++	alias egrep='egrep --colour=auto'
++	alias fgrep='fgrep --colour=auto'
++else
++	if [[ ${EUID} == 0 ]] ; then
++		# show root@ when we don't have colors
++		PS1='\u@\h \W \$ '
++	else
++		PS1='\u@\h \w \$ '
++	fi
++fi
++
++unset use_color safe_term match_lhs sh

data/patches/dot-bashrc.patch

@@ -0,0 +1,11 @@
+--- a/bash/dot.bashrc
++++ b/bash/dot.bashrc
+@@ -5,5 +5,5 @@
+ # If not running interactively, don't do anything
+ [[ $- != *i* ]] && return
+
+-alias ls='ls --color=auto'
+-PS1='[\u@\h \W]\$ '
++# alias ls='ls --color=auto'
++# PS1='[\u@\h \W]\$ '
+

data/patches/system-bashrc.patch

@@ -0,0 +1,19 @@
+--- a/bash/system.bashrc
++++ a/bash/system.bashrc
+@@ -1,5 +1,5 @@
+ #
+-# /etc/bash.bashrc
++# /etc/bash/bashrc
+ #
+
+ # If not running interactively, don't do anything
+@@ -19,4 +19,8 @@
+     ;;
+ esac
+
++for sh in /etc/bash/bashrc.d/*.bashrc ; do
++	[[ -r ${sh} ]] && source "${sh}"
++done
++
+ [ -r /usr/share/bash-completion/bash_completion   ] && . /usr/share/bash-completion/bash_completion
+

data/patches/system-bashrc_logout.patch

@@ -0,0 +1,8 @@
+--- a/bash/system.bash_logout
++++ a/bash/system.bash_logout
+@@ -1,3 +1,3 @@
+ #
+-# /etc/bash.bash_logout
++# /etc/bash/bash_logout
+ #
+

data/pkg.list.d/default.list

@@ -1 +0,0 @@
-openrc

initcpio/hooks/artix

@@ -102,7 +102,7 @@ _mnt_dev() {
 _verify_checksum() {
     local _status
     cd "/run/artix/bootmnt/${artixbasedir}/${arch}"
-    md5sum -c $1.md5 > /tmp/checksum.log 2>&1
+    sha512sum -c $1.sha512 > /tmp/checksum.log 2>&1
     _status=$?
     cd "${OLDPWD}"
     return ${_status}
@@ -120,7 +120,7 @@ _verify_signature() {
 run_hook() {
     [[ -z "${arch}" ]] && arch="$(uname -m)"
     [[ -z "${copytoram_size}" ]] && copytoram_size="75%"
-    [[ -z "${artixbasedir}" ]] && artixbasedir="cromnix"
+    [[ -z "${artixbasedir}" ]] && artixbasedir="artix"
 
     [[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="arch"
     [[ -z "${artixdevice}" ]] && artixdevice="/dev/disk/by-label/${artixlabel}"
@@ -160,7 +160,7 @@ artix_mount_handler() {
     if [[ "${checksum}" == "y" ]]; then
         for fs in rootfs desktopfs livefs;do
             if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sfs" ]]; then
-                if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.md5" ]]; then
+                if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sha512" ]]; then
                     msg -n ":: Self-test requested, please wait..."
                     if _verify_checksum "${fs}"; then
                         msg "done. Checksum is OK, continue booting."
@@ -170,7 +170,7 @@ artix_mount_handler() {
                         launch_interactive_shell
                     fi
                 else
-                    echo "ERROR: checksum=y option specified but ${artixbasedir}/${arch}/${fs}.md5 not found"
+                    echo "ERROR: checksum=y option specified but ${artixbasedir}/${arch}/${fs}.sha512 not found"
                     launch_interactive_shell
                 fi
             fi

initcpio/hooks/miso

@@ -1,245 +0,0 @@
-# args: source, newroot, mountpoint
-_mnt_dmsnapshot() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}";
-    local img_name="${img_fullname%%.*}"
-    local dm_snap_name="${dm_snap_prefix}_${img_name}"
-    local ro_dev ro_dev_size rw_dev
-
-    ro_dev=$(losetup --find --show --read-only "${img}")
-    echo ${ro_dev} >> /run/miso/used_block_devices
-    ro_dev_size=$(blockdev --getsz ${ro_dev})
-
-    if [[ "${cow_persistent}" == "P" ]]; then
-        if [[ -f "/run/miso/cowspace/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '/run/miso/cowspace/${cow_directory}/${img_name}.cow', using as persistent."
-        else
-            msg ":: Creating '/run/miso/cowspace/${cow_directory}/${img_name}.cow' as persistent."
-            truncate -s "${cow_spacesize}" "/run/miso/cowspace/${cow_directory}/${img_name}.cow"
-        fi
-    else
-        if [[ -f "/run/miso/cowspace/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '/run/miso/cowspace/${cow_directory}/${img_name}.cow' but non-persistent requested, removing."
-            rm -f "/run/miso/cowspace/${cow_directory}/${img_name}.cow"
-        fi
-        msg ":: Creating '/run/miso/cowspace/${cow_directory}/${img_name}.cow' as non-persistent."
-        truncate -s "${cow_spacesize}" "/run/miso/cowspace/${cow_directory}/${img_name}.cow"
-    fi
-
-    rw_dev=$(losetup --find --show "/run/miso/cowspace/${cow_directory}/${img_name}.cow")
-    echo ${rw_dev} >> /run/miso/used_block_devices
-
-    dmsetup create ${dm_snap_name} --table "0 ${ro_dev_size} snapshot ${ro_dev} ${rw_dev} ${cow_persistent} ${cow_chunksize}"
-
-    _mnt_dev "/dev/mapper/${dm_snap_name}" "${mnt}" "-w" "defaults"
-    echo $(readlink -f /dev/mapper/${dm_snap_name}) >> /run/miso/used_block_devices
-}
-
-# args: source, newroot, mountpoint
-_mnt_overlayfs() {
-    local src="${1}"
-    local newroot="${2}"
-    local mnt="${3}"
-    local work_dir="/run/miso/overlay_root/work"
-    local upper_dir="/run/miso/overlay_root/upper"
-
-    mkdir -p "${upper_dir}" "${work_dir}"
-
-    mount -t overlay overlay -o lowerdir="${src}",upperdir="${upper_dir}",workdir="${work_dir}" "${newroot}${mnt}"
-}
-
-# args: /path/to/image_file, mountpoint
-_mnt_sfs() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}"
-    local sfs_dev
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg -n ":: Copying squashfs image to RAM..."
-        if ! cp "${img}" "/run/miso/copytoram/${img_fullname}" ; then
-            echo "ERROR: while copy '${img}' to '/run/miso/copytoram/${img_fullname}'"
-            launch_interactive_shell
-        fi
-        img="/run/miso/copytoram/${img_fullname}"
-        msg "done."
-    fi
-    sfs_dev=$(losetup --find --show --read-only "${img}")
-    echo ${sfs_dev} >> /run/miso/used_block_devices
-    _mnt_dev "${sfs_dev}" "${mnt}" "-r" "defaults"
-}
-
-# args: device, mountpoint, flags, opts
-_mnt_dev() {
-    local dev="${1}"
-    local mnt="${2}"
-    local flg="${3}"
-    local opts="${4}"
-
-    mkdir -p "${mnt}"
-
-    msg ":: Mounting '${dev}' to '${mnt}'"
-
-    while ! poll_device "${dev}" 30; do
-        echo "ERROR: '${dev}' device did not show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    if mount -o "${opts}" "${flg}" "${dev}" "${mnt}"; then
-        msg ":: Device '${dev}' mounted successfully."
-    else
-        echo "ERROR; Failed to mount '${dev}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-_verify_checksum() {
-    local _status
-    cd "/run/miso/bootmnt/${misobasedir}/${arch}"
-    md5sum -c $1.md5 > /tmp/checksum.log 2>&1
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-_verify_signature() {
-    local _status
-    cd "/run/miso/bootmnt/${misobasedir}/${arch}"
-    gpg --homedir /gpg --status-fd 1 --verify $1.sfs.sig 2>/dev/null | grep -qE '^\[GNUPG:\] GOODSIG'
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-run_hook() {
-    [[ -z "${arch}" ]] && arch="$(uname -m)"
-    [[ -z "${copytoram_size}" ]] && copytoram_size="75%"
-    [[ -z "${misobasedir}" ]] && misobasedir="cromnix"
-
-    [[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="arch"
-    [[ -z "${misodevice}" ]] && misodevice="/dev/disk/by-label/${misolabel}"
-    [[ -z "${cow_spacesize}" ]] && cow_spacesize="256M"
-    [[ -z "${overlay_root_size}" ]] && overlay_root_size="75%"
-
-    if [[ -n "${cow_label}" ]]; then
-        cow_device="/dev/disk/by-label/${cow_label}"
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    elif [[ -n "${cow_device}" ]]; then
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    else
-        cow_persistent="N"
-    fi
-
-    [[ -z "${cow_flags}" ]] && cow_flags="defaults"
-    [[ -z "${cow_directory}" ]] && cow_directory="persistent_${misolabel}/${arch}"
-    [[ -z "${cow_chunksize}" ]] && cow_chunksize="8"
-
-    # set mount handler for miso
-    mount_handler="miso_mount_handler"
-}
-
-# This function is called normally from init script, but it can be called
-# as chain from other mount handlers.
-# args: /path/to/newroot
-miso_mount_handler() {
-    local newroot="${1}"
-
-    if ! mountpoint -q "/run/miso/bootmnt"; then
-        _mnt_dev "${misodevice}" "/run/miso/bootmnt" "-r" "defaults"
-        if [[ "${copytoram}" != "y" ]]; then
-            echo $(readlink -f ${misodevice}) >> /run/miso/used_block_devices
-        fi
-    fi
-
-    if [[ "${checksum}" == "y" ]]; then
-        for fs in rootfs desktopfs livefs;do
-            if [[ -f "/run/miso/bootmnt/${misobasedir}/${arch}/${fs}.sfs" ]]; then
-                if [[ -f "/run/miso/bootmnt/${misobasedir}/${arch}/${fs}.md5" ]]; then
-                    msg -n ":: Self-test requested, please wait..."
-                    if _verify_checksum "${fs}"; then
-                        msg "done. Checksum is OK, continue booting."
-                    else
-                        echo "ERROR: one or more files are corrupted"
-                        echo "see /tmp/checksum.log for details"
-                        launch_interactive_shell
-                    fi
-                else
-                    echo "ERROR: checksum=y option specified but ${misobasedir}/${arch}/${fs}.md5 not found"
-                    launch_interactive_shell
-                fi
-            fi
-        done
-    fi
-
-    if [[ "${verify}" == "y" ]]; then
-        for fs in rootfs desktopfs livefs;do
-            if [[ -f "/run/miso/bootmnt/${misobasedir}/${arch}/${fs}.sfs" ]]; then
-                if [[ -f "/run/miso/bootmnt/${misobasedir}/${arch}/${fs}.sfs.sig" ]]; then
-                    msg -n ":: Signature verification requested, please wait..."
-                    if _verify_signature "${fs}"; then
-                        msg "done. Signature is OK, continue booting."
-                    else
-                        echo "ERROR: one or more files are corrupted"
-                        launch_interactive_shell
-                    fi
-                else
-                    echo "ERROR: verify=y option specified but ${misobasedir}/${arch}/${fs}.sfs.sig not found"
-                    launch_interactive_shell
-                fi
-            fi
-        done
-    fi
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Mounting /run/miso/copytoram (tmpfs) filesystem, size=${copytoram_size}"
-        mkdir -p /run/miso/copytoram
-        mount -t tmpfs -o "size=${copytoram_size}",mode=0755 copytoram /run/miso/copytoram
-    fi
-
-    if [[ -n "${cow_device}" ]]; then
-        _mnt_dev "${cow_device}" "/run/miso/cowspace" "-r" "${cow_flags}"
-        echo $(readlink -f ${cow_device}) >> /run/miso/used_block_devices
-        mount -o remount,rw "/run/miso/cowspace"
-    else
-        msg ":: Mounting /run/miso/cowspace (tmpfs) filesystem, size=${cow_spacesize}..."
-        mkdir -p /run/miso/cowspace
-        mount -t tmpfs -o "size=${cow_spacesize}",mode=0755 cowspace /run/miso/cowspace
-    fi
-    mkdir -p -m 0700 "/run/miso/cowspace/${cow_directory}"
-
-    msg -n ":: Mounting overlay root (tmpfs) filesystem, size=${overlay_root_size}..."
-    mkdir -p /run/miso/overlay_root
-    mount -t tmpfs -o "size=${overlay_root_size}",mode=0755 overlay_root /run/miso/overlay_root
-
-    local src="/run/miso/bootmnt/${misobasedir}/${arch}"
-    local dest_sfs="/run/miso/sfs" dest_img="/run/miso/img"
-    local lower_dir
-
-    for sfs in livefs desktopfs rootfs;do
-        if [[ -f "${src}/${sfs}.sfs" ]]; then
-            _mnt_sfs "${src}/${sfs}.sfs" "${dest_sfs}/${sfs}"
-            if [[ -f "${dest_sfs}/${sfs}/${sfs}.img" ]]; then
-                mkdir -p ${dest_img}
-                lower_dir=${lower_dir:-}${lower_dir:+:}"${dest_img}/${sfs}"
-                _mnt_dmsnapshot "${dest_sfs}/${sfs}/${sfs}.img" "${dest_img}/${sfs}"
-            else
-                lower_dir=${lower_dir:-}${lower_dir:+:}"${dest_sfs}/${sfs}"
-            fi
-        fi
-    done
-
-    _mnt_overlayfs "${lower_dir}" "${newroot}" "/"
-
-    if [[ "${copytoram}" == "y" ]]; then
-        umount -d /run/miso/bootmnt
-        mkdir -p /run/miso/bootmnt/${misobasedir}/${arch}
-        mount -o bind /run/miso/copytoram /run/miso/bootmnt/${misobasedir}/${arch}
-    fi
-}
-
-# vim:ft=sh:ts=4:sw=4:et:

initcpio/hooks/miso_loop_mnt

@@ -1,35 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    [[ -n "${img_label}" ]] && img_dev="/dev/disk/by-label/${img_label}"
-    [[ -z "${img_flags}" ]] && img_flags="defaults"
-    if [[ -n "${img_dev}" && -n "${img_loop}" ]]; then
-        mount_handler="miso_loop_mount_handler"
-    fi
-}
-
-miso_loop_mount_handler () {
-    newroot="${1}"
-
-    local _dev_loop
-
-    msg ":: Setup a loop device from ${img_loop} located at device ${img_dev}"
-    _mnt_dev "${img_dev}" "/run/miso/img_dev" "-r" "${img_flags}"
-    if [[ "${copytoram}" != "y" ]]; then
-        echo $(readlink -f ${img_dev}) >> /run/miso/used_block_devices
-    fi
-
-    if _dev_loop=$(losetup --find --show --read-only "/run/miso/img_dev/${img_loop}"); then
-        misodevice="${_dev_loop}"
-    else
-        echo "ERROR: Setting loopback device for file '/run/miso/img_dev/${img_loop}'"
-        launch_interactive_shell
-    fi
-
-    miso_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        losetup -d ${_dev_loop} 2>/dev/null
-        umount /run/miso/img_dev
-    fi
-}

initcpio/hooks/miso_pxe_common

@@ -1,72 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    # Do *not* declare 'bootif_dev' local! We need it in run_latehook().
-    local i net_mac bootif_mac
-    # These variables will be parsed from /tmp/net-*.conf generated by ipconfig
-    local DEVICE
-    local IPV4ADDR IPV4BROADCAST IPV4NETMASK IPV4GATEWAY IPV4DNS0 IPV4DNS1
-    local HOSTNAME DNSDOMAIN NISDOMAIN ROOTSERVER ROOTPATH
-    local filename
-    # /tmp/net-*.conf
-
-    if [[ -n "${ip}" ]]; then
-        if [[ -n "${BOOTIF}" ]]; then
-            bootif_mac=${BOOTIF#01-}
-            bootif_mac=${bootif_mac//-/:}
-            for i in /sys/class/net/*/address; do
-                read net_mac < ${i}
-                if [[ "${bootif_mac}" == "${net_mac}" ]]; then
-                    bootif_dev=${i#/sys/class/net/}
-                    bootif_dev=${bootif_dev%/address}
-                    break
-                fi
-            done
-            if [[ "${ip}" == "dhcp" ]]; then
-               ip=":::::${bootif_dev}:dhcp"
-            else
-               ip="${ip}::${bootif_dev}"
-           fi
-        fi
-
-        # setup network and save some values
-        if ! ipconfig -t 20 "ip=${ip}"; then
-                echo "ERROR; Failed to configure network"
-                echo "   Falling back to interactive prompt"
-                echo "   You can try to fix the problem manually, log out when you are finished"
-                launch_interactive_shell
-        fi
-
-        . /tmp/net-*.conf
-
-        pxeserver=${ROOTSERVER}
-
-        # setup DNS resolver
-        if [[ "${IPV4DNS0}" != "0.0.0.0" ]]; then
-            echo "# added by miso_pxe_common hook" > /etc/resolv.conf
-            echo "nameserver ${IPV4DNS0}" >> /etc/resolv.conf
-        fi
-        if [[ "${IPV4DNS1}" != "0.0.0.0" ]]; then
-            echo "nameserver ${IPV4DNS1}" >> /etc/resolv.conf
-        fi
-        if [[ -n "${DNSDOMAIN}" ]]; then
-            echo "search ${DNSDOMAIN}" >> /etc/resolv.conf
-            echo "domain ${DNSDOMAIN}" >> /etc/resolv.conf
-        fi
-    fi
-}
-
-run_latehook () {
-    if [[ -n "${ip}" ]]; then
-        [[ -z "${copy_resolvconf}" ]] && copy_resolvconf="y"
-
-        if [[ "${copytoram}" == "y" ]]; then
-            if [[ -n "${bootif_dev}" ]]; then
-                ip addr flush dev "${bootif_dev}"
-                ip link set "${bootif_dev}" down
-            fi
-        elif [[ "${copy_resolvconf}" != "n" && -f /etc/resolv.conf ]]; then
-            cp /etc/resolv.conf /new_root/etc/resolv.conf
-        fi
-    fi
-}

initcpio/hooks/miso_pxe_http

@@ -1,59 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${miso_http_srv}" ]]; then
-
-        # booting with http is always copy-to-ram, so set here to make sure
-        # addresses are flushed and interface is set down
-        copytoram="y"
-
-        miso_http_srv=$(eval echo ${miso_http_srv})
-        [[ -z "${miso_http_spc}" ]] && miso_http_spc="75%"
-
-        mount_handler="miso_pxe_http_mount_handler"
-    fi
-}
-
-# Fetch a file with CURL
-#
-# $1 URL
-# $2 Destination directory inside httpspace/${misobasedir}
-_curl_get() {
-    local _url="${1}"
-    local _dst="${2}"
-
-    msg ":: Downloading '${_url}'"
-    if ! curl -L -f -o "/run/miso/httpspace/${misobasedir}${_dst}/${_url##*/}" --create-dirs "${_url}"; then
-        echo "ERROR: Downloading '${_url}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-miso_pxe_http_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Mounting /run/miso/httpspace (tmpfs) filesystem, size='${miso_http_spc}'"
-    mkdir -p "/run/miso/httpspace"
-    mount -t tmpfs -o size="${miso_http_spc}",mode=0755 httpspace "/run/miso/httpspace"
-
-    local _src=${miso_http_srv}${misobasedir}/${arch}
-
-    for sfs in livefs desktopfs rootfs;do
-        if [[ ! -z "$( curl -s --head "${_src}/${sfs}.sfs" | grep "OK" )" ]]; then
-            _curl_get "${_src}/${sfs}.sfs" "/${arch}"
-
-            if [[ "${checksum}" == "y" ]]; then
-                _curl_get "${_src}/${sfs}.md5" "/${arch}"
-            fi
-            if [[ "${verify}" == "y" ]]; then
-                _curl_get "${_src}/${sfs}.sfs.sig" "/${arch}"
-            fi
-        fi
-    done
-    mkdir -p "/run/miso/bootmnt"
-    mount -o bind /run/miso/httpspace /run/miso/bootmnt
-
-    miso_mount_handler ${newroot}
-}

initcpio/hooks/miso_pxe_nbd

@@ -1,47 +0,0 @@
-# vim: set ft=sh:
-
-run_earlyhook() {
-    if [[ -n "${ip}" && -n "${miso_nbd_srv}" ]]; then
-        # Module autoloading like with loop devices does not work, doing manually...
-        modprobe nbd 2> /dev/null
-    fi
-}
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${miso_nbd_srv}" ]]; then
-
-        miso_nbd_srv=$(eval echo ${miso_nbd_srv})
-        [[ -z "${miso_nbd_name}" ]] && miso_nbd_name="miso"
-
-        mount_handler="miso_pxe_nbd_mount_handler"
-    fi
-}
-
-miso_pxe_nbd_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Waiting for boot device..."
-    while ! poll_device /dev/nbd0 30; do
-        echo "ERROR: boot device didn't show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    msg ":: Setup NBD from ${miso_nbd_srv} at /dev/nbd0"
-    if [[ "${copytoram}" != "n" ]]; then
-        nbd-client ${miso_nbd_srv} -N ${miso_nbd_name} /dev/nbd0
-        copytoram="y"
-    else
-        nbd-client ${miso_nbd_srv} -N ${miso_nbd_name} -persist /dev/nbd0
-    fi
-
-    misodevice=/dev/nbd0
-
-    miso_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Disconnect NBD from ${miso_nbd_srv} at /dev/nbd0"
-        nbd-client -d /dev/nbd0
-    fi
-}

initcpio/hooks/miso_pxe_nfs

@@ -1,30 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${miso_nfs_srv}" ]]; then
-
-        miso_nfs_srv=$(eval echo ${miso_nfs_srv})
-        [[ -n "${miso_nfs_opt}" ]] && miso_nfs_opt="-o ${miso_nfs_opt}"
-
-        mount_handler="miso_nfs_mount_handler"
-    fi
-}
-
-miso_nfs_mount_handler() {
-    newroot="${1}"
-    mkdir -p "/run/miso/bootmnt"
-    msg ":: Mounting '${miso_nfs_srv}'"
-    # Do not put "${miso_nfs_opt}" nfsmount fails!
-    if ! nfsmount ${miso_nfs_opt} "${miso_nfs_srv}" "/run/miso/bootmnt"; then
-        echo "ERROR: Mounting '${miso_nfs_srv}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-
-    if [[ "${copytoram}" != "n" ]]; then
-        copytoram="y"
-    fi
-
-    miso_mount_handler ${newroot}
-}

initcpio/hooks/miso_shutdown

@@ -1,6 +0,0 @@
-run_cleanuphook() {
-    rm -rf /usr/lib/modules
-    cp -ax / /run/initramfs
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/miso

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "cdrom"
-    add_module "loop"
-    add_module "dm-snapshot"
-    add_module "overlay"
-
-    add_runscript
-
-    add_binary /usr/lib/udev/cdrom_id
-    add_binary blockdev
-    add_binary dmsetup
-    add_binary losetup
-    add_binary mountpoint
-    add_binary truncate
-    add_binary gpg
-    add_binary grep
-
-    add_file /usr/lib/udev/rules.d/60-cdrom_id.rules
-    add_file /usr/lib/udev/rules.d/10-dm.rules
-    add_file /usr/lib/udev/rules.d/95-dm-notify.rules
-    add_file /usr/lib/initcpio/udev/11-dm-initramfs.rules /usr/lib/udev/rules.d/11-dm-initramfs.rules
-    if [[ $MISO_GNUPG_FD ]]; then
-        mkdir -p "$BUILDROOT$dest"/gpg
-        gpg --homedir "$BUILDROOT$dest"/gpg --import <&$MISO_GNUPG_FD
-    fi
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/miso_kms

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "radeon"
-    add_module "nouveau"
-    add_module "i915"
-    add_module "via-agp"
-    add_module "sis-agp"
-    add_module "intel-agp"
-
-    if [[ $(uname -m) == i686 ]]; then
-        add_module "amd64-agp"
-        add_module "ati-agp"
-        add_module "sworks-agp"
-        add_module "ali-agp"
-        add_module "amd-k7-agp"
-        add_module "nvidia-agp"
-        add_module "efficeon-agp"
-    fi
-}
-
-help() {
-    cat << HELPEOF
-Adds all common KMS drivers to the initramfs image.
-HELPEOF
-}

initcpio/install/miso_loop_mnt

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via loop device.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/miso_pxe_common

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_checked_modules -f "(irda|phy|wimax|wireless|ppp_|plip|pppoe)" "/drivers/net/"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/ipconfig /bin/ipconfig
-
-    # Add hosts support files+dns
-    add_symlink /usr/lib/libnss_files.so.2 $(readlink /usr/lib/libnss_files.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_files.so.2)
-    add_symlink /usr/lib/libnss_dns.so.2 $(readlink /usr/lib/libnss_dns.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_dns.so.2)
-
-    add_dir /etc
-    echo "hosts: files dns" > $BUILDROOT/etc/nsswitch.conf
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/miso_pxe_http

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-
-    add_binary curl
-
-    add_file $(readlink -f /etc/ssl/certs/ca-certificates.crt) /etc/ssl/certs/ca-certificates.crt
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and HTTP.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/miso_pxe_nbd

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nbd"
-
-    add_runscript
-
-    add_binary nbd-client
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NBD.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/miso_pxe_nfs

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nfs"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/nfsmount /bin/nfsmount
-}
-
-help() {
-    cat <<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NFS.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/miso_shutdown

@@ -1,20 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_binary cp
-
-    add_runscript
-
-    add_file /etc/initcpio/miso_shutdown /shutdown
-}
-
-help() {
-    cat <<HELPEOF
-This hook will create a shutdown initramfs in /run/initramfs
-that we can pivot to on shutdown in order to unmount / and
-and others mount points, dm-snapshot devices and loopback devices.
-Mostly usefull for dm-snapshot persistent.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

lib/util-chroot.sh

@@ -23,6 +23,9 @@ create_min_fs(){
     mkdir -m 0755 -p $1/var/{cache/pacman/pkg,lib/pacman,log} $1/{dev,etc}
     mkdir -m 1777 -p $1/{tmp,run}
     mkdir -m 0555 -p $1/{sys,proc}
+    if [[ ! -f $1/etc/machine-id ]];then
+        touch $1/etc/machine-id
+    fi
 }
 
 is_btrfs() {
@@ -69,51 +72,19 @@ default_mirror(){
     echo "Server = $mirror" > $mnt/etc/pacman.d/mirrorlist
 }
 
-create_chroot(){
-    local timer=$(get_timer)
-    setarch "${target_arch}" \
-        mkchroot "$@"
-    show_elapsed_time "${FUNCNAME}" "${timer}"
-}
-
-delete_chroot() {
-    local copydir=$1
-    local copy=${1:-$2}
-
-    stat_busy "Removing chroot copy [%s]" "$copy"
-    if is_btrfs "$chrootdir" && ! mountpoint -q "$copydir"; then
-        subvolume_delete_recursive "$copydir" ||
-            die "Unable to delete subvolume %s" "$copydir"
-    else
-        # avoid change of filesystem in case of an umount failure
-        rm --recursive --force --one-file-system "$copydir" ||
-            die "Unable to delete %s" "$copydir"
-    fi
-
-    # remove lock file
-    rm -f "$copydir.lock"
-    stat_done
-}
-
 # $1: chroot
-# kill_chroot_process(){
+kill_chroot_process(){
-#     # enable to have more debug info
+    local prefix="$1" flink pid name
-#     #msg "machine-id (etc): $(cat $1/etc/machine-id)"
+    for root_dir in /proc/*/root; do
-#     #[[ -e $1/var/lib/dbus/machine-id ]] && msg "machine-id (lib): $(cat $1/var/lib/dbus/machine-id)"
+        flink=$(readlink $root_dir)
-#     #msg "running processes: "
+        if [ "x$flink" != "x" ]; then
-#     #lsof | grep $1
+            if [ "x${flink:0:${#prefix}}" = "x$prefix" ]; then
-#
+                # this process is in the chroot...
-#     local prefix="$1" flink pid name
+                pid=$(basename $(dirname "$root_dir"))
-#     for root_dir in /proc/*/root; do
+                name=$(ps -p $pid -o comm=)
-#         flink=$(readlink $root_dir)
+                info "Killing chroot process: %s (%s)" "$name" "$pid"
-#         if [ "x$flink" != "x" ]; then
+                kill -9 "$pid"
-#             if [ "x${flink:0:${#prefix}}" = "x$prefix" ]; then
+            fi
-#                 # this process is in the chroot...
+        fi
-#                 pid=$(basename $(dirname "$root_dir"))
+    done
-#                 name=$(ps -p $pid -o comm=)
+}
-#                 info "Killing chroot process: %s (%s)" "$name" "$pid"
-#                 kill -9 "$pid"
-#             fi
-#         fi
-#     done
-# }

lib/util-fstab.sh

@@ -13,6 +13,7 @@ declare -A pseudofs_types=([anon_inodefs]=1
                         [bdev]=1
                         [binfmt_misc]=1
                         [cgroup]=1
+                        [cgroup2]=1
                         [configfs]=1
                         [cpuset]=1
                         [debugfs]=1
@@ -72,7 +73,7 @@ valid_number_of_base() {
 mangle() {
     local i= chr= out=
 
-    unset {a..f} {A..F}
+    local {a..f}= {A..F}=
 
     for (( i = 0; i < ${#1}; i++ )); do
         chr=${1:i:1}
@@ -91,7 +92,7 @@ mangle() {
 unmangle() {
     local i= chr= out= len=$(( ${#1} - 4 ))
 
-    unset {a..f} {A..F}
+    local {a..f}= {A..F}=
 
     for (( i = 0; i < len; i++ )); do
         chr=${1:i:1}

lib/util-iso-chroot.sh

@@ -1,136 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-add_svc_rc(){
-    local mnt="$1" name="$2" rlvl="$3"
-    if [[ -f $mnt/etc/init.d/$name ]];then
-        msg2 "Setting %s ..." "$name"
-        chroot $mnt rc-update add $name $rlvl &>/dev/null
-    fi
-}
-
-set_xdm(){
-    if [[ -f $1/etc/conf.d/xdm ]];then
-        local conf='DISPLAYMANAGER="'${displaymanager}'"'
-        sed -i -e "s|^.*DISPLAYMANAGER=.*|${conf}|" $1/etc/conf.d/xdm
-    fi
-}
-
-configure_hosts(){
-    sed -e "s|localhost.localdomain|localhost.localdomain ${hostname}|" -i $1/etc/hosts
-}
-
-configure_lsb(){
-    local conf=$1/etc/lsb-release
-    if [[ -e $conf ]] ; then
-        msg2 "Configuring lsb-release"
-        sed -i -e "s/^.*DISTRIB_RELEASE.*/DISTRIB_RELEASE=${dist_release}/" $conf
-#         sed -i -e "s/^.*DISTRIB_CODENAME.*/DISTRIB_CODENAME=${dist_codename}/" $conf
-    fi
-}
-
-configure_logind(){
-    local conf=$1/etc/$2/logind.conf
-    if [[ -e $conf ]];then
-        msg2 "Configuring logind ..."
-        sed -i 's/#\(HandleSuspendKey=\)suspend/\1ignore/' "$conf"
-        sed -i 's/#\(HandleLidSwitch=\)suspend/\1ignore/' "$conf"
-        sed -i 's/#\(HandleHibernateKey=\)hibernate/\1ignore/' "$conf"
-    fi
-}
-
-configure_services(){
-    local mnt="$1"
-    info "Configuring [%s]" "${initsys}"
-    case ${initsys} in
-        'openrc')
-            for svc in ${openrc_boot[@]}; do
-                add_svc_rc "$mnt" "$svc" "boot"
-            done
-            for svc in ${openrc_default[@]}; do
-                [[ $svc == "xdm" ]] && set_xdm "$mnt"
-                add_svc_rc "$mnt" "$svc" "default"
-            done
-            for svc in ${enable_live[@]}; do
-                add_svc_rc "$mnt" "$svc" "default"
-            done
-        ;;
-    esac
-    info "Done configuring [%s]" "${initsys}"
-}
-
-configure_system(){
-    local mnt="$1"
-    case ${initsys} in
-        'openrc')
-            configure_logind "$mnt" "elogind"
-        ;;
-    esac
-    echo ${hostname} > $mnt/etc/hostname
-}
-
-clean_iso_root(){
-    local dest="$1"
-    msg "Deleting isoroot [%s] ..." "${dest##*/}"
-    rm -rf --one-file-system "$dest"
-}
-
-clean_up_image(){
-    local path mnt="$1"
-    msg2 "Cleaning [%s]" "${mnt##*/}"
-
-    default_locale "reset" "$mnt"
-    path=$mnt/boot
-    if [[ -d "$path" ]]; then
-        find "$path" -name 'initramfs*.img' -delete &> /dev/null
-    fi
-    path=$mnt/var/lib/pacman/sync
-    if [[ -d $path ]];then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/cache/pacman/pkg
-    if [[ -d $path ]]; then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/log
-    if [[ -d $path ]]; then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/tmp
-    if [[ -d $path ]];then
-        find "$path" -mindepth 1 -delete &> /dev/null
-    fi
-    path=$mnt/tmp
-    if [[ -d $path ]];then
-        find "$path" -mindepth 1 -delete &> /dev/null
-    fi
-
-    if [[ ${mnt##*/} == 'livefs' ]];then
-        rm -rf "$mnt/etc/pacman.d/gnupg"
-    fi
-
-    find "$mnt" -name *.pacnew -name *.pacsave -name *.pacorig -delete
-    file=$mnt/boot/grub/grub.cfg
-    if [[ -f "$file" ]]; then
-        rm $file
-    fi
-}
-
-chroot_clean(){
-    local dest="$1"
-    for root in "$dest"/*; do
-        [[ -d ${root} ]] || continue
-        local name=${root##*/}
-        delete_chroot "${root}" "$dest"
-    done
-    rm -rf --one-file-system "$dest"
-}
-

lib/util-iso-grub.sh

@@ -19,7 +19,7 @@ prepare_initcpio(){
 
 prepare_initramfs(){
     local mnt="$1"
-    cp ${DATADIR}/mkinitcpio.conf $mnt/etc/mkinitcpio-${os_id}.conf
+    cp ${DATADIR}/mkinitcpio.conf $mnt/etc/mkinitcpio-${iso_name}.conf
     if [[ -n ${gpgkey} ]]; then
         user_run "gpg --export ${gpgkey} >${AT_USERCONFDIR}/gpgkey"
         exec 17<>${AT_USERCONFDIR}/gpgkey
@@ -27,7 +27,7 @@ prepare_initramfs(){
     local _kernel=$(cat $mnt/usr/lib/modules/*/version)
     ARTIX_GNUPG_FD=${gpgkey:+17} chroot-run $mnt \
         /usr/bin/mkinitcpio -k ${_kernel} \
-        -c /etc/mkinitcpio-${os_id}.conf \
+        -c /etc/mkinitcpio-${iso_name}.conf \
         -g /boot/initramfs.img
 
     if [[ -n ${gpgkey} ]]; then
@@ -46,6 +46,16 @@ prepare_boot_extras(){
     cp $src/usr/share/licenses/common/GPL2/license.txt $dest/memtest.COPYING
 }
 
+configure_grub(){
+    local conf="$1"
+
+    sed -e "s|@arch@|${target_arch}|g" \
+        -e "s|@iso_label@|${iso_label}|" \
+        -e "s|@iso_name@|${iso_name}|g" \
+        -e "s|@kernel_args@|${kernel_args}|g" \
+        -i $conf
+}
+
 prepare_grub(){
     local platform=i386-pc img='core.img' grub=$3/boot/grub efi=$3/efi/boot \
         lib=$1/usr/lib/grub prefix=/boot/grub theme=$2/usr/share/grub data=$1/usr/share/grub
@@ -83,7 +93,7 @@ prepare_grub(){
     grub-mkimage -d ${grub}/${platform} -o ${efi}/${img} -O ${platform} -p ${prefix} iso9660
 
     prepare_dir ${grub}/themes
-    cp -r ${theme}/themes/${os_id} ${grub}/themes/
+    cp -r ${theme}/themes/${iso_name} ${grub}/themes/
     cp ${data}/unicode.pf2 ${grub}
     cp -r ${theme}/{locales,tz} ${grub}
 

lib/util-iso-mount.sh

@@ -1,65 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-track_img() {
-    info "mount: [%s]" "$2"
-    mount "$@" && IMG_ACTIVE_MOUNTS=("$2" "${IMG_ACTIVE_MOUNTS[@]}")
-}
-
-mount_img() {
-    IMG_ACTIVE_MOUNTS=()
-    mkdir -p "$2"
-    track_img "$1" "$2"
-}
-
-umount_img() {
-    if [[ -n ${IMG_ACTIVE_MOUNTS[@]} ]];then
-        info "umount: [%s]" "${IMG_ACTIVE_MOUNTS[@]}"
-        umount "${IMG_ACTIVE_MOUNTS[@]}"
-        unset IMG_ACTIVE_MOUNTS
-        rm -r "$1"
-    fi
-}
-
-track_fs() {
-    info "overlayfs mount: [%s]" "$5"
-    mount "$@" && FS_ACTIVE_MOUNTS=("$5" "${FS_ACTIVE_MOUNTS[@]}")
-}
-
-mount_fs(){
-    FS_ACTIVE_MOUNTS=()
-    local lower= upper="$1" work="$2" pkglist="$3"
-    local fs=${upper##*/}
-    local rootfs="$work/rootfs" desktopfs="$work/desktopfs" livefs="$work/livefs"
-    mkdir -p "${mnt_dir}/work"
-    mkdir -p "$upper"
-    case $fs in
-        desktopfs) lower="$rootfs" ;;
-        livefs)
-            lower="$rootfs"
-            [[ -f $pkglist ]] && lower="$desktopfs":"$rootfs"
-        ;;
-        bootfs)
-            lower="$livefs":"$rootfs"
-            [[ -f $pkglist ]] && lower="$livefs":"$desktopfs":"$rootfs"
-        ;;
-    esac
-    track_fs -t overlay overlay -olowerdir="$lower",upperdir="$upper",workdir="${mnt_dir}/work" "$upper"
-}
-
-umount_fs(){
-    if [[ -n ${FS_ACTIVE_MOUNTS[@]} ]];then
-        info "overlayfs umount: [%s]" "${FS_ACTIVE_MOUNTS[@]}"
-        umount "${FS_ACTIVE_MOUNTS[@]}"
-        unset FS_ACTIVE_MOUNTS
-        rm -rf "${mnt_dir}/work"
-    fi
-}

lib/util-iso-profile.sh

@@ -8,31 +8,29 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-write_repo_conf(){
-    local repos=$(find $USER_HOME -type f -name "repo_info")
-    local path name
-    [[ -z ${repos[@]} ]] && run_dir=${DATADIR}/iso-profiles && return 1
-    for r in ${repos[@]}; do
-        path=${r%/repo_info}
-        name=${path##*/}
-        echo "run_dir=$path" > ${AT_USERCONFDIR}/$name.conf
-    done
-}
-
-load_run_dir(){
-    local gitrepo='iso-profiles'
-    [[ -f ${AT_USERCONFDIR}/$gitrepo.conf ]] || write_repo_conf
-    [[ -r ${AT_USERCONFDIR}/$gitrepo.conf ]] && source ${AT_USERCONFDIR}/$gitrepo.conf
-    return 0
-}
-
 load_profile(){
-    local profdir="$1"
+    local prof="$1"
-    local profile_conf="$profdir/profile.conf"
+    local profdir="${DATADIR}/iso-profiles/$prof"
+    [[ "$prof" != 'base' ]] && profdir=${workspace_dir}/iso-profiles/$prof
 
-    [[ -f ${profile_conf} ]] || return 1
+    root_list="${DATADIR}/iso-profiles/base/Packages-Root"
+    [[ -f "$profdir/Packages-Root" ]] && root_list="$profdir/Packages-Root"
 
-    [[ -r ${profile_conf} ]] && source ${profile_conf}
+    root_overlay="${DATADIR}/iso-profiles/base/root-overlay"
+    [[ -d "$profdir/root-overlay" ]] && root_overlay="$profdir/root-overlay"
+
+    [[ -f "$profdir/Packages-Desktop" ]] && desktop_list="$profdir/Packages-Desktop"
+    [[ -d "$profdir/desktop-overlay" ]] && desktop_overlay="$profdir/desktop-overlay"
+
+    live_list="${DATADIR}/iso-profiles/base/Packages-Live"
+    [[ -f "$profdir/Packages-Live" ]] && live_list="$profdir/Packages-Live"
+
+    live_overlay="${DATADIR}/iso-profiles/base/live-overlay"
+    [[ -d "$profdir/live-overlay" ]] && live_overlay="$profdir/live-overlay"
+
+    [[ -f $profdir/profile.conf ]] || return 1
+
+    [[ -r $profdir/profile.conf ]] && source $profdir/profile.conf
 
     [[ -z ${displaymanager} ]] && displaymanager="none"
 
@@ -46,7 +44,7 @@ load_profile(){
     [[ -z ${password} ]] && password="artix"
 
     if [[ -z ${addgroups} ]];then
-        addgroups="video,power,storage,optical,network,lp,scanner,wheel,users"
+        addgroups="video,power,storage,optical,network,lp,scanner,wheel,users,audio"
     fi
 
     if [[ -z ${openrc_boot[@]} ]];then
@@ -61,44 +59,11 @@ load_profile(){
 
     enable_live=('artix-live' 'pacman-init')
 
-    netgroups="https://raw.githubusercontent.com/artix-linux/netgroups/master"
+    [[ -z ${netgroups_url} ]] && netgroups_url="https://raw.githubusercontent.com/artix-linux/netgroups/master"
-
-    root_list=${run_dir}/base/Packages-Root
-    [[ -f "$profdir/Packages-Root" ]] && root_list="$profdir/Packages-Root"
-
-    root_overlay="${run_dir}/base/root-overlay"
-    [[ -d "$profdir/root-overlay" ]] && root_overlay="$profdir/root-overlay"
-
-    [[ -f "$profdir/Packages-Desktop" ]] && desktop_list=$profdir/Packages-Desktop
-    [[ -d "$profdir/desktop-overlay" ]] && desktop_overlay="$profdir/desktop-overlay"
-
-    live_list="${run_dir}/base/Packages-Live"
-    [[ -f "$profdir/Packages-Live" ]] && live_list="$profdir/Packages-Live"
-
-    live_overlay="${run_dir}/base/live-overlay"
-    [[ -d "$profdir/live-overlay" ]] && live_overlay="$profdir/live-overlay"
 
     return 0
 }
 
-reset_profile(){
-    unset displaymanager
-    unset autologin
-    unset hostname
-    unset username
-    unset password
-    unset addgroups
-    unset openrc_boot
-    unset openrc_default
-    unset enable_live
-    unset root_list
-    unset desktop_list
-    unset live_list
-    unset root_overlay
-    unset desktop_overlay
-    unset live_overlay
-}
-
 write_live_session_conf(){
     local path=$1${SYSCONFDIR}
     [[ ! -d $path ]] && mkdir -p "$path"
@@ -119,9 +84,8 @@ write_live_session_conf(){
     echo "addgroups='${addgroups}'" >> ${conf}
 }
 
-# $1: file name
 load_pkgs(){
-    local pkglist="$1" arch="$2" init="$3" _kv="$4"
+    local pkglist="$1" init="$2" _kv="$3"
     info "Loading Packages: [%s] ..." "${pkglist##*/}"
 
     local _init="s|>$init||g"
@@ -131,13 +95,6 @@ load_pkgs(){
         'runit') _init_rm1="s|>s6.*||g"; _init_rm2="s|>openrc.*||g" ;;
     esac
 
-    local _arch="s|>x86_64||g" _arch_rm="s|>i686.*||g"
-
-    if [[ "$arch" == 'i686' ]];then
-        _arch="s|>i686||g"
-        _arch_rm="s|>x86_64.*||g"
-    fi
-
     local _blacklist="s|>blacklist.*||g" \
         _kernel="s|KERNEL|$_kv|g" \
         _space="s| ||g" \
@@ -151,8 +108,6 @@ load_pkgs(){
             | sed "$_init" \
             | sed "$_init_rm1" \
             | sed "$_init_rm2" \
-            | sed "$_arch" \
-            | sed "$_arch_rm" \
             | sed "$_kernel" \
             | sed "$_clean"))
 }

lib/util-iso-publish.sh

@@ -9,10 +9,15 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
+connect(){
+    local home="/home/frs/project/${project}"
+    echo "${account},${project}@frs.${file_host}:${home}"
+}
+
 gen_webseed(){
     local webseed seed="$1"
     for mirror in ${host_mirrors[@]};do
-        webseed=${webseed:-}${webseed:+,}"http://${mirror}.dl.${seed}"
+        webseed=${webseed:-}${webseed:+,}"https://${mirror}.dl.${seed}"
     done
     echo ${webseed}
 }
@@ -22,9 +27,10 @@ make_torrent(){
 
     if [[ -n $(find ${src_dir} -type f -name "*.iso") ]]; then
         for iso in $(ls ${src_dir}/*.iso);do
-            local seed=${host}/project/${project}/${target_dir}/${iso##*/}
+            local seed=${file_host}/project/${project}${target_dir}${iso##*/}
             local mktorrent_args=(-c "${torrent_meta}" -p -l ${piece_size} -a ${tracker_url} -w $(gen_webseed ${seed}))
             ${verbose} && mktorrent_args+=(-v)
+            info "mktorrent_args: %s" "${mktorrent_args[@]}"
             msg2 "Creating (%s) ..." "${iso##*/}.torrent"
             mktorrent ${mktorrent_args[*]} -o ${iso}.torrent ${iso}
         done
@@ -33,7 +39,7 @@ make_torrent(){
 
 prepare_transfer(){
     target_dir="/iso/${profile}/"
-    src_dir="${cache_dir_iso}/${profile}/"
+    src_dir="${iso_pool}/${profile}/"
     ${torrent} && make_torrent
 }
 

lib/util-iso-yaml.sh

@@ -0,0 +1,108 @@
+#!/bin/bash
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+write_bootloader_conf(){
+    local conf="$1/bootloader.conf"
+    msg2 "Writing %s ..." "${conf##*/}"
+    echo '---' > "$conf"
+    echo "efiBootLoader: \"grub\"" >> "$conf"
+    echo "kernel: \"/vmlinuz-$kernel-${target_arch}\"" >> "$conf"
+    echo "img: \"/initramfs-$kernel-${target_arch}.img\"" >> "$conf"
+    echo "fallback: \"/initramfs-$kernel-${target_arch}-fallback.img\"" >> "$conf"
+    echo 'timeout: "10"' >> "$conf"
+    echo "kernelLine: \", with ${kernel}\"" >> "$conf"
+    echo "fallbackKernelLine: \", with ${kernel} (fallback initramfs)\"" >> "$conf"
+    echo 'grubInstall: "grub-install"' >> "$conf"
+    echo 'grubMkconfig: "grub-mkconfig"' >> "$conf"
+    echo 'grubCfg: "/boot/grub/grub.cfg"' >> "$conf"
+    echo '#efiBootloaderId: "dirname"' >> "$conf"
+}
+
+write_servicescfg_conf(){
+    local conf="$1/servicescfg.conf"
+    msg2 "Writing %s ..." "${conf##*/}"
+    echo '---' >  "$conf"
+    echo '' >> "$conf"
+    echo 'services:' >> "$conf"
+    echo '    enabled:' >> "$conf"
+    for s in ${openrc_boot[@]};do
+        echo "      - name: $s" >> "$conf"
+        echo '        runlevel: boot' >> "$conf"
+    done
+    for s in ${openrc_default[@]};do
+        echo "      - name: $s" >> "$conf"
+        echo '        runlevel: default' >> "$conf"
+    done
+}
+
+write_initcpio_conf(){
+    local conf="$1/initcpio.conf"
+    msg2 "Writing %s ..." "${conf##*/}"
+    echo "---" > "$conf"
+    echo "kernel: ${kernel}" >> "$conf"
+}
+
+write_users_conf(){
+    local conf="$1/users.conf"
+    msg2 "Writing %s ..." "${conf##*/}"
+    echo "---" > "$conf"
+    echo "defaultGroups:" >> "$conf"
+    local IFS=','
+    for g in ${addgroups[@]};do
+        echo "    - $g" >> "$conf"
+    done
+    unset IFS
+    echo "autologinGroup:  autologin" >> "$conf"
+    echo "doAutologin:     false" >> "$conf"
+    echo "sudoersGroup:    wheel" >> "$conf"
+    echo "setRootPassword: true" >> "$conf"
+    echo "doReusePassword: false" >> "$conf" # only used in old 'users' module
+    echo "availableShells: /bin/bash, /bin/zsh" >> "$conf" # only used in new 'users' module
+    echo "avatarFilePath:  ~/.face" >> "$conf"
+}
+
+write_netinstall_conf(){
+    local conf="$1/netinstall.conf"
+    msg2 "Writing %s ..." "${conf##*/}"
+    echo "---" > "$conf"
+    echo "groupsUrl: ${netgroups}" >> "$conf"
+}
+
+write_unpack_conf(){
+    local conf="$1/unpackfs.conf"
+    msg2 "Writing %s ..." "${conf##*/}"
+    echo "---" > "$conf"
+    echo "unpack:" >> "$conf"
+    echo "    - source: \"/run/${iso_name}/bootmnt/${iso_name}/${target_arch}/rootfs.sfs\"" >> "$conf"
+    echo "      sourcefs: \"squashfs\"" >> "$conf"
+    echo "      destination: \"\"" >> "$conf"
+    if [[ -f "${desktop_list}" ]] ; then
+        echo "    - source: \"/run/${iso_name}/bootmnt/${iso_name}/${target_arch}/desktopfs.sfs\"" >> "$conf"
+        echo "      sourcefs: \"squashfs\"" >> "$conf"
+        echo "      destination: \"\"" >> "$conf"
+    fi
+}
+
+configure_calamares(){
+    local dest="$1" mods="$1/etc/calamares/modules"
+    if [[ -d $dest/etc/calamares/modules ]];then
+        info "Configuring [Calamares]"
+        write_netinstall_conf "$mods"
+        write_unpack_conf "$mods"
+        write_users_conf "$mods"
+        write_initcpio_conf "$mods"
+        case ${initsys} in
+            'openrc') write_servicescfg_conf "$mods" ;;
+        esac
+        write_bootloader_conf "$mods"
+        info "Done configuring [Calamares]"
+    fi
+}

lib/util-iso.sh

@@ -10,11 +10,64 @@
 # GNU General Public License for more details.
 
 import ${LIBDIR}/util-chroot.sh
-import ${LIBDIR}/util-iso-chroot.sh
 import ${LIBDIR}/util-iso-grub.sh
-import ${LIBDIR}/util-yaml.sh
+import ${LIBDIR}/util-iso-yaml.sh
-import ${LIBDIR}/util-iso-mount.sh
+import ${LIBDIR}/util-iso-profile.sh
-import ${LIBDIR}/util-profile.sh
+
+track_img() {
+    info "mount: [%s]" "$2"
+    mount "$@" && IMG_ACTIVE_MOUNTS=("$2" "${IMG_ACTIVE_MOUNTS[@]}")
+}
+
+mount_img() {
+    IMG_ACTIVE_MOUNTS=()
+    mkdir -p "$2"
+    track_img "$1" "$2"
+}
+
+umount_img() {
+    if [[ -n ${IMG_ACTIVE_MOUNTS[@]} ]];then
+        info "umount: [%s]" "${IMG_ACTIVE_MOUNTS[@]}"
+        umount "${IMG_ACTIVE_MOUNTS[@]}"
+        unset IMG_ACTIVE_MOUNTS
+        rm -r "$1"
+    fi
+}
+
+track_fs() {
+    info "overlayfs mount: [%s]" "$5"
+    mount "$@" && FS_ACTIVE_MOUNTS=("$5" "${FS_ACTIVE_MOUNTS[@]}")
+}
+
+mount_overlay(){
+    FS_ACTIVE_MOUNTS=()
+    local lower= upper="$1" work="$2" pkglist="$3"
+    local fs=${upper##*/}
+    local rootfs="$work/rootfs" desktopfs="$work/desktopfs" livefs="$work/livefs"
+    mkdir -p "${mnt_dir}/work"
+    mkdir -p "$upper"
+    case $fs in
+        desktopfs) lower="$rootfs" ;;
+        livefs)
+            lower="$rootfs"
+            [[ -f $pkglist ]] && lower="$desktopfs":"$rootfs"
+        ;;
+        bootfs)
+            lower="$livefs":"$rootfs"
+            [[ -f $pkglist ]] && lower="$livefs":"$desktopfs":"$rootfs"
+        ;;
+    esac
+    track_fs -t overlay overlay -olowerdir="$lower",upperdir="$upper",workdir="${mnt_dir}/work" "$upper"
+}
+
+umount_overlay(){
+    if [[ -n ${FS_ACTIVE_MOUNTS[@]} ]];then
+        info "overlayfs umount: [%s]" "${FS_ACTIVE_MOUNTS[@]}"
+        umount "${FS_ACTIVE_MOUNTS[@]}"
+        unset FS_ACTIVE_MOUNTS
+        rm -rf "${mnt_dir}/work"
+    fi
+}
 
 error_function() {
     if [[ -p $logpipe ]]; then
@@ -26,25 +79,22 @@ error_function() {
         error "A failure occurred in %s()." "$func"
         plain "Aborting..."
     fi
-    umount_fs
+    umount_overlay
     umount_img
     exit 2
 }
 
 # $1: function
 run_log(){
-    local func="$1"
+    local func="$1" log_dir='/var/log/artools'
     local logfile=${log_dir}/$(gen_iso_fn).$func.log
-#     local tmpfile=${tmp_dir}/$func.ansi.log
+    logpipe=$(mktemp -u "/tmp/$func.pipe.XXXXXXXX")
-    logpipe=$(mktemp -u "${tmp_dir}/$func.pipe.XXXXXXXX")
     mkfifo "$logpipe"
     tee "$logfile" < "$logpipe" &
     local teepid=$!
     $func &> "$logpipe"
     wait $teepid
     rm "$logpipe"
-#     cat $tmpfile | perl -pe 's/\e\[?.*?[\@-~]//g' > $logfile
-#     rm "$tmpfile"
 }
 
 run_safe() {
@@ -68,11 +118,127 @@ run_safe() {
 trap_exit() {
     local sig=$1; shift
     error "$@"
-    umount_fs
+    umount_overlay
     trap -- "$sig"
     kill "-$sig" "$$"
 }
 
+prepare_traps(){
+    for sig in TERM HUP QUIT; do
+        trap "trap_exit $sig \"$(gettext "%s signal caught. Exiting...")\" \"$sig\"" "$sig"
+    done
+    trap 'trap_exit INT "$(gettext "Aborted by user! Exiting...")"' INT
+#     trap 'trap_exit USR1 "$(gettext "An unknown error has occurred. Exiting...")"' ERR
+}
+
+add_svc_rc(){
+    local mnt="$1" name="$2" rlvl="$3"
+    if [[ -f $mnt/etc/init.d/$name ]];then
+        msg2 "Setting %s ..." "$name"
+        chroot $mnt rc-update add $name $rlvl &>/dev/null
+    fi
+}
+
+set_xdm(){
+    if [[ -f $1/etc/conf.d/xdm ]];then
+        local conf='DISPLAYMANAGER="'${displaymanager}'"'
+        sed -i -e "s|^.*DISPLAYMANAGER=.*|${conf}|" $1/etc/conf.d/xdm
+    fi
+}
+
+configure_hosts(){
+    sed -e "s|localhost.localdomain|localhost.localdomain ${hostname}|" -i $1/etc/hosts
+}
+
+configure_logind(){
+    local conf=$1/etc/$2/logind.conf
+    if [[ -e $conf ]];then
+        msg2 "Configuring logind ..."
+        sed -i 's/#\(HandleSuspendKey=\)suspend/\1ignore/' "$conf"
+        sed -i 's/#\(HandleLidSwitch=\)suspend/\1ignore/' "$conf"
+        sed -i 's/#\(HandleHibernateKey=\)hibernate/\1ignore/' "$conf"
+    fi
+}
+
+configure_services(){
+    local mnt="$1"
+    info "Configuring [%s]" "${initsys}"
+    case ${initsys} in
+        'openrc')
+            for svc in ${openrc_boot[@]}; do
+                add_svc_rc "$mnt" "$svc" "boot"
+            done
+            for svc in ${openrc_default[@]}; do
+                [[ $svc == "xdm" ]] && set_xdm "$mnt"
+                add_svc_rc "$mnt" "$svc" "default"
+            done
+            for svc in ${enable_live[@]}; do
+                add_svc_rc "$mnt" "$svc" "default"
+            done
+        ;;
+    esac
+    info "Done configuring [%s]" "${initsys}"
+}
+
+configure_system(){
+    local mnt="$1"
+    case ${initsys} in
+        'openrc')
+            configure_logind "$mnt" "elogind"
+        ;;
+    esac
+    echo ${hostname} > $mnt/etc/hostname
+}
+
+clean_iso_root(){
+    local dest="$1"
+    msg "Deleting isoroot [%s] ..." "${dest##*/}"
+    rm -rf --one-file-system "$dest"
+}
+
+clean_up_image(){
+    local path mnt="$1"
+    msg2 "Cleaning [%s]" "${mnt##*/}"
+
+    default_locale "reset" "$mnt"
+    path=$mnt/boot
+    if [[ -d "$path" ]]; then
+        find "$path" -name 'initramfs*.img' -delete &> /dev/null
+    fi
+    path=$mnt/var/lib/pacman/sync
+    if [[ -d $path ]];then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/cache/pacman/pkg
+    if [[ -d $path ]]; then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/log
+    if [[ -d $path ]]; then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/tmp
+    if [[ -d $path ]];then
+        find "$path" -mindepth 1 -delete &> /dev/null
+    fi
+    path=$mnt/tmp
+    if [[ -d $path ]];then
+        find "$path" -mindepth 1 -delete &> /dev/null
+    fi
+
+    if [[ ${mnt##*/} == 'livefs' ]];then
+        rm -rf "$mnt/etc/pacman.d/gnupg"
+    fi
+
+    find "$mnt" -name *.pacnew -name *.pacsave -name *.pacorig -delete
+    if [[ -f "$mnt/boot/grub/grub.cfg" ]]; then
+        rm $mnt/boot/grub/grub.cfg
+    fi
+    if [[ -f "$mnt/etc/machine-id" ]]; then
+        rm $mnt/etc/machine-id
+    fi
+}
+
 configure_live_image(){
     local fs="$1"
     msg "Configuring [livefs]"
@@ -96,9 +262,9 @@ make_sig () {
 
 make_checksum(){
     local idir="$1" file="$2"
-    msg2 "Creating md5sum ..."
+    msg2 "Creating sha512sum ..."
     cd $idir
-    md5sum $file.sfs > $file.md5
+    sha512sum $file.sfs > $file.sha512
     cd ${OLDPWD}
 }
 
@@ -109,15 +275,15 @@ make_sfs() {
         error "The path %s does not exist" "${src}"
         retrun 1
     fi
-    local timer=$(get_timer) dest=${iso_root}/${os_id}/${target_arch}
+    local timer=$(get_timer) dest=${iso_root}/${iso_name}/${target_arch}
     local name=${1##*/}
     local sfs="${dest}/${name}.sfs"
     mkdir -p ${dest}
     msg "Generating SquashFS image for %s" "${src}"
     if [[ -f "${sfs}" ]]; then
         local has_changed_dir=$(find ${src} -newer ${sfs})
-        msg2 "Possible changes for %s ..." "${src}"  >> ${tmp_dir}/buildiso.debug
+        msg2 "Possible changes for %s ..." "${src}"  >> /tmp/buildiso.debug
-        msg2 "%s" "${has_changed_dir}" >> ${tmp_dir}/buildiso.debug
+        msg2 "%s" "${has_changed_dir}" >> /tmp/buildiso.debug
         if [[ -n "${has_changed_dir}" ]]; then
             msg2 "SquashFS image %s is not up to date, rebuilding..." "${sfs}"
             rm "${sfs}"
@@ -179,7 +345,7 @@ assemble_iso(){
     xorriso -as mkisofs \
         --modification-date=${mod_date} \
         --protective-msdos-label \
-        -volid "${dist_branding}" \
+        -volid "${iso_label}" \
         -appid "$(get_osname) Live/Rescue CD" \
         -publisher "$(get_osname) <$(get_disturl)>" \
         -preparer "Prepared by artools/${0##*/}" \
@@ -193,14 +359,11 @@ assemble_iso(){
         -no-emul-boot -boot-load-size 4 -boot-info-table --grub2-boot-info \
         -eltorito-alt-boot \
         -append_partition 2 0xef ${iso_root}/efi.img \
-        -e --interval:appended_partition_2:all:: \
+        -e --interval:appended_partition_2:all:: -iso_mbr_part_type 0x00 \
         -no-emul-boot \
         -iso-level 3 \
         -o ${iso_dir}/${iso_file} \
         ${iso_root}/
-
-#         arg to add with xorriso-1.4.7
-#         -iso_mbr_part_type 0x00
 }
 
 # Build ISO
@@ -226,9 +389,9 @@ make_iso() {
 
 gen_iso_fn(){
     local vars=() name
-    vars+=("${os_id}")
+    vars+=("${iso_name}")
     vars+=("${profile}")
-    vars+=("${dist_release}")
+    vars+=("${iso_version}")
     vars+=("${target_arch}")
     for n in ${vars[@]};do
         name=${name:-}${name:+-}${n}
@@ -236,6 +399,12 @@ gen_iso_fn(){
     echo $name
 }
 
+install_packages(){
+    local fs="$1"
+    setarch "${target_arch}" mkchroot \
+        "${mkchroot_args[@]}" "${fs}" "${packages[@]}"
+}
+
 copy_overlay(){
     local src="$1" dest="$2"
     if [[ -e "$src" ]];then
@@ -244,56 +413,53 @@ copy_overlay(){
     fi
 }
 
-# Base installation (rootfs)
+make_rootfs() {
-make_image_root() {
     if [[ ! -e ${work_dir}/rootfs.lock ]]; then
         msg "Prepare [Base installation] (rootfs)"
         local rootfs="${work_dir}/rootfs"
 
         prepare_dir "${rootfs}"
 
-        create_chroot "${mkchroot_args[@]}" "${rootfs}" "${packages[@]}"
+        install_packages "${rootfs}"
 
         copy_overlay "${root_overlay}" "${rootfs}"
 
-        configure_lsb "${rootfs}"
-
         clean_up_image "${rootfs}"
 
         msg "Done [Base installation] (rootfs)"
     fi
 }
 
-make_image_desktop() {
+make_desktopfs() {
     if [[ ! -e ${work_dir}/desktopfs.lock ]]; then
         msg "Prepare [Desktop installation] (desktopfs)"
         local desktopfs="${work_dir}/desktopfs"
 
         prepare_dir "${desktopfs}"
 
-        mount_fs "${desktopfs}" "${work_dir}"
+        mount_overlay "${desktopfs}" "${work_dir}"
 
-        create_chroot "${mkchroot_args[@]}" "${desktopfs}" "${packages[@]}"
+        install_packages "${desktopfs}"
 
         copy_overlay "${desktop_overlay}" "${desktopfs}"
 
-        umount_fs
+        umount_overlay
         clean_up_image "${desktopfs}"
 
         msg "Done [Desktop installation] (desktopfs)"
     fi
 }
 
-make_image_live() {
+make_livefs() {
     if [[ ! -e ${work_dir}/livefs.lock ]]; then
         msg "Prepare [Live installation] (livefs)"
         local livefs="${work_dir}/livefs"
 
         prepare_dir "${livefs}"
 
-        mount_fs "${livefs}" "${work_dir}" "${desktop_list}"
+        mount_overlay "${livefs}" "${work_dir}" "${desktop_list}"
 
-        create_chroot "${mkchroot_args[@]}" "${livefs}" "${packages[@]}"
+        install_packages "${livefs}"
 
         copy_overlay "${live_overlay}" "${livefs}"
 
@@ -301,7 +467,7 @@ make_image_live() {
 
         pacman -Qr "${livefs}" > ${iso_dir}/$(gen_iso_fn)-pkgs.txt
 
-        umount_fs
+        umount_overlay
 
         clean_up_image "${livefs}"
 
@@ -309,7 +475,7 @@ make_image_live() {
     fi
 }
 
-make_image_boot() {
+make_bootfs() {
     if [[ ! -e ${work_dir}/bootfs.lock ]]; then
         msg "Prepare [/iso/boot]"
         local boot="${iso_root}/boot"
@@ -320,7 +486,7 @@ make_image_boot() {
 
         local bootfs="${work_dir}/bootfs"
 
-        mount_fs "${bootfs}" "${work_dir}" "${desktop_list}"
+        mount_overlay "${bootfs}" "${work_dir}" "${desktop_list}"
 
         prepare_initcpio "${bootfs}"
         prepare_initramfs "${bootfs}"
@@ -328,7 +494,7 @@ make_image_boot() {
         cp ${bootfs}/boot/initramfs.img ${boot}/initramfs-${target_arch}.img
         prepare_boot_extras "${bootfs}" "${boot}"
 
-        umount_fs
+        umount_overlay
 
         rm -R ${bootfs}
         : > ${work_dir}/bootfs.lock
@@ -336,23 +502,6 @@ make_image_boot() {
     fi
 }
 
-configure_grub(){
-    local conf="$1"
-    local default_args="artixbasedir=${os_id} artixlabel=${dist_branding}" boot_args=('quiet')
-
-    sed -e "s|@DIST_NAME@|${dist_name}|g" \
-        -e "s|@ARCH@|${target_arch}|g" \
-        -e "s|@DEFAULT_ARGS@|${default_args}|g" \
-        -e "s|@BOOT_ARGS@|${boot_args[*]}|g" \
-        -e "s|@PROFILE@|${profile}|g" \
-        -i $conf
-}
-
-configure_grub_theme(){
-    local conf="$1"
-    sed -e "s|@DIST@|${os_id}|" -i "$conf"
-}
-
 make_grub(){
     if [[ ! -e ${work_dir}/grub.lock ]]; then
         msg "Prepare [/iso/boot/grub]"
@@ -360,7 +509,6 @@ make_grub(){
         prepare_grub "${work_dir}/rootfs" "${work_dir}/livefs" "${iso_root}"
 
         configure_grub "${iso_root}/boot/grub/kernels.cfg"
-        configure_grub_theme "${iso_root}/boot/grub/variable.cfg"
 
         : > ${work_dir}/grub.lock
         msg "Done [/iso/boot/grub]"
@@ -376,78 +524,18 @@ compress_images(){
 
 prepare_images(){
     local timer=$(get_timer)
-    load_pkgs "${root_list}" "${target_arch}" "${initsys}" "${kernel}"
+    load_pkgs "${root_list}" "${initsys}" "${kernel}"
-    run_safe "make_image_root"
+    run_safe "make_rootfs"
     if [[ -f "${desktop_list}" ]] ; then
-        load_pkgs "${desktop_list}" "${target_arch}" "${initsys}" "${kernel}"
+        load_pkgs "${desktop_list}" "${initsys}" "${kernel}"
-        run_safe "make_image_desktop"
+        run_safe "make_desktopfs"
     fi
     if [[ -f ${live_list} ]]; then
-        load_pkgs "${live_list}" "${target_arch}" "${initsys}" "${kernel}"
+        load_pkgs "${live_list}" "${initsys}" "${kernel}"
-        run_safe "make_image_live"
+        run_safe "make_livefs"
     fi
-    run_safe "make_image_boot"
+    run_safe "make_bootfs"
     run_safe "make_grub"
 
     show_elapsed_time "${FUNCNAME}" "${timer}"
 }
-
-check_requirements(){
-    [[ -f ${run_dir}/repo_info ]] || die "%s is not a valid iso profiles directory!" "${run_dir}"
-
-    for sig in TERM HUP QUIT; do
-        trap "trap_exit $sig \"$(gettext "%s signal caught. Exiting...")\" \"$sig\"" "$sig"
-    done
-    trap 'trap_exit INT "$(gettext "Aborted by user! Exiting...")"' INT
-    trap 'trap_exit USR1 "$(gettext "An unknown error has occurred. Exiting...")"' ERR
-}
-
-prepare_build(){
-    timer_start=$(get_timer)
-    local profile_dir=${run_dir}/${profile}
-
-    load_profile "${profile_dir}"
-
-    local pac_arch='default' pacman_conf
-    [[ "${target_arch}" == 'x86_64' ]] && pac_arch='multilib'
-
-    pacman_conf="${DATADIR}/pacman-$pac_arch.conf"
-
-    iso_file=$(gen_iso_fn).iso
-
-    mkchroot_args+=(-C ${pacman_conf})
-    work_dir=${chroots_iso}/${profile}/${target_arch}
-
-    iso_dir="${cache_dir_iso}/${profile}"
-
-    iso_root=${chroots_iso}/${profile}/iso
-    mnt_dir=${chroots_iso}/${profile}/mnt
-    prepare_dir "${mnt_dir}"
-    prepare_dir "${iso_dir}"
-}
-
-build(){
-    prepare_build
-    msg "Start building [%s]" "${profile}"
-    if ${clean_first};then
-        chroot_clean "${chroots_iso}/${profile}/${target_arch}"
-        clean_iso_root "${iso_root}"
-    fi
-
-    if ${iso_only}; then
-        [[ ! -d ${work_dir} ]] && die "Create images: buildiso -p %s -x" "${profile}"
-        compress_images
-        exit 1
-    fi
-    if ${images_only}; then
-        prepare_images
-        warning "Continue compress: buildiso -p %s -zc ..." "${profile}"
-        exit 1
-    else
-        prepare_images
-        compress_images
-    fi
-    reset_profile
-    msg "Finished building [%s]" "${profile}"
-    show_elapsed_time "${FUNCNAME}" "${timer_start}"
-}

lib/util-msg.sh

@@ -8,61 +8,22 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-export LC_MESSAGES=C
+# export LC_MESSAGES=C
 export LANG=C
 
-declare ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW=''
+source /usr/share/makepkg/util.sh
 
 if [[ -t 2 ]]; then
-    # prefer terminal safe colored and bold text when tput is supported
+    colorize
-    if tput setaf 0 &>/dev/null; then
+else
-        ALL_OFF="$(tput sgr0)"
+    declare -gr ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW=''
-        BOLD="$(tput bold)"
-        RED="${BOLD}$(tput setaf 1)"
-        GREEN="${BOLD}$(tput setaf 2)"
-        YELLOW="${BOLD}$(tput setaf 3)"
-        BLUE="${BOLD}$(tput setaf 4)"
-    else
-        ALL_OFF="\e[0m"
-        BOLD="\e[1m"
-        RED="${BOLD}\e[31m"
-        GREEN="${BOLD}\e[32m"
-        YELLOW="${BOLD}\e[33m"
-        BLUE="${BOLD}\e[34m"
-    fi
 fi
-readonly ALL_OFF BOLD BLUE GREEN RED YELLOW
-
-plain() {
-    local mesg=$1; shift
-    printf "${BOLD}    ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-msg() {
-    local mesg=$1; shift
-    printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-msg2() {
-    local mesg=$1; shift
-    printf "${BLUE}  ->${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
 
 info() {
     local mesg=$1; shift
     printf "${YELLOW} -->${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
 }
 
-warning() {
-    local mesg=$1; shift
-    printf "${YELLOW}==> WARNING:${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-error() {
-    local mesg=$1; shift
-    printf "${RED}==> ERROR:${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
 stat_busy() {
     local mesg=$1; shift
     printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}...${ALL_OFF}" "$@" >&2
@@ -115,6 +76,21 @@ die() {
     cleanup 255
 }
 
+msg_table_header(){
+    local mesg=$1; shift
+    printf "${GREEN} ${mesg} ${ALL_OFF}\n" "$@" >&2
+}
+
+msg_row(){
+    local mesg=$1; shift
+    printf "${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+msg_row_update(){
+    local mesg=$1; shift
+    printf "${RED}${BOLD} ${mesg} ${ALL_OFF}\n" "$@" >&2
+}
+
 import(){
     if [[ -r "$1" ]];then
         source "$1"

lib/util-pkg-chroot.sh

@@ -1,108 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-load_compiler_settings(){
-    local arch="$1" conf
-    conf=${make_conf_dir}/$arch.conf
-
-    [[ -f $conf ]] || return 1
-
-    info "Loading compiler settings: %s" "$arch"
-    source $conf
-
-    return 0
-}
-
-get_makepkg_conf(){
-
-    local arch="$1"
-    local conf="${tmp_dir}/makepkg-${arch}.conf"
-
-    if [[ -f $AT_USERCONFDIR/makepkg.conf ]];then
-        cp "$AT_USERCONFDIR/makepkg.conf" "$conf"
-    else
-        cp "${DATADIR}/makepkg.conf" "$conf"
-    fi
-
-    load_compiler_settings "${arch}"
-
-    sed -i "$conf" \
-        -e "s|@CARCH[@]|$carch|g" \
-        -e "s|@CHOST[@]|$chost|g" \
-        -e "s|@CFLAGS[@]|$cflags|g"
-
-    echo "$conf"
-}
-
-check_build(){
-    local bdir="$1"
-    find_pkg "${bdir}"
-    [[ ! -f ${bdir}/PKGBUILD ]] && die "Directory must contain a PKGBUILD!"
-}
-
-find_pkg(){
-    local bdir="$1"
-    local result=$(find . -type d -name "${bdir}")
-    [[ -z $result ]] && die "%s is not a valid package!" "${bdir}"
-}
-
-sign_pkg(){
-    local pkg="$1"
-    [[ -f ${pkg_dir}/${pkg}.sig ]] && rm ${pkg_dir}/${pkg}.sig
-    user_run "signfile ${pkg_dir}/${pkg}"
-}
-
-move_to_cache(){
-    local src="$1"
-    [[ -n $PKGDEST ]] && src="$PKGDEST/$src"
-    [[ ! -f $src ]] && die
-    msg2 "Moving [%s] -> [%s]" "${src##*/}" "${pkg_dir}"
-    mv $src ${pkg_dir}/
-    user_own "${pkg_dir}" -R
-    ${sign} && sign_pkg "${src##*/}"
-#     [[ -n $PKGDEST ]] && rm "$src"
-    user_own "${pkg_dir}" -R
-}
-
-post_build(){
-    source PKGBUILD
-    local ext='pkg.tar.xz' tarch ver src
-    for pkg in ${pkgname[@]};do
-        case $arch in
-            any) tarch='any' ;;
-            *) tarch=${target_arch}
-        esac
-        local ver=$(get_full_version "$pkg") src
-        src=$pkg-$ver-$tarch.$ext
-        move_to_cache "$src"
-        if ${repo_add};then
-            deploypkg "${deploypkg_args[@]}" -p "$src"
-            user_own "${repos_local}/${repository}" -R
-        fi
-    done
-}
-
-build_pkg(){
-    mkchrootpkg "${mkchrootpkg_args[@]}" || die
-    post_build
-}
-
-build(){
-    local pkg="$1"
-    check_build "${pkg}"
-    msg "Start building [%s]" "${pkg}"
-    cd ${pkg}
-        build_pkg
-    cd ..
-    msg "Finished building [%s]" "${pkg}"
-    show_elapsed_time "${FUNCNAME}" "${timer_start}"
-}
-

lib/util-pkg-publish.sh

@@ -9,67 +9,65 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-repo_update(){
+import ${LIBDIR}/util-pkg.sh
-    local repo="$1" arch="$2" pkg="$3" action="$4" copy="$5"
+
-    if [[ $action == "add" ]];then
+del_from_repo(){
-        if [[ -f ${repos_local}/$repo/os/$arch/$pkg \
+    local repo="$1" destarch="$2" pkg="$3" ver result
-            && -f ${repos_local}/$repo/os/$arch/$pkg.sig ]];then
+    local repo_path=${repos_root}/$repo/os/$destarch
-            rm ${repos_local}/$repo/os/$arch/$pkg
+    source $pkg/PKGBUILD
-            rm ${repos_local}/$repo/os/$arch/$pkg.sig
+    for name in ${pkgname[@]};do
+        [[ $arch == any ]] && CARCH=any
+        ver=$(get_full_version $name)
+        if ! result=$(find_cached_package "$name" "$ver" "$CARCH");then
+            cd $repo_path
+            repo-remove -R $repo.db.tar.xz $name
         fi
-        local cmd='ln -s'
+    done
-        $copy && cmd='cp'
-        $cmd ${cache_dir_pkg}/$repo-$arch/$pkg{,.sig} ${repos_local}/$repo/os/$arch/
-    fi
-    local dest=${repos_local}/$repo/os/$arch/$pkg
-    [[ $action == "remove" ]] && dest=$pkg
-    repo-$action -R ${repos_local}/$repo/os/$arch/$repo.db.tar.xz $dest
 }
 
-update_lock(){
+move_to_repo(){
-    local repo="$1"
+    local repo_src="$1" repo_dest="$2" repo_arch="$3"
-    rsync "${rsync_args[@]}" --exclude='os' "${repos_local}/$repo/" "$(connect)${repos_remote}/$repo/"
+    local repo_path=${repos_root}/$repo_src/os/$repo_arch
+    local src=$PWD
+    local filelist=${workspace_dir}/$repo_src.files.txt
+    local pkglist=${workspace_dir}/$repo_src.pkgs.txt
+    [[ -n ${PKGDEST} ]] && src=${PKGDEST}
+    cd $repo_path
+    msg "Writing repo lists [%s]" "$repo_src"
+    ls *.pkg.tar.xz{,.sig} > $filelist
+    ls *.pkg.tar.xz > $pkglist
+    rm -v *
+    repo-add $repo_src.db.tar.xz
+    repo_path=${repos_root}/$repo_dest/os/$repo_arch
+    local move=$(cat $filelist) pkgs=$(cat $pkglist)
+    msg "Reading repo lists [%s]" "$repo_dest"
+    for f in ${move[@]};do
+        ln -sfv $src/$f $repo_path/
+    done
+    cd $repo_path
+    repo-add -R $repo_dest.db.tar.xz ${pkgs[@]}
 }
 
-is_locked(){
+add_to_repo(){
-    local repo="$1" url="https://${host}/projects/${project}/files/repos"
+    local repo="$1" destarch="$2" pkg="$3" ver pkgfile=
-    if wget --spider -v $url/$repo/$repo.lock &>/dev/null;then
+    local repo_path=${repos_root}/$repo/os/$destarch
-        return 0
+    source $pkg/PKGBUILD
-    else
+    for name in ${pkgname[@]};do
-        return 1
+        info "finddeps: %s" "$name"
-    fi
+        finddeps $name
+        [[ $arch == any ]] && CARCH=any
+        ver=$(get_full_version $name)
+        if pkgfile=$(find_cached_package "$name" "$ver" "$CARCH"); then
+            info "find-libdeps: %s" "$pkgfile"
+            find-libdeps "$pkgfile"
+            info "find-libprovides: %s" "$pkgfile"
+            find-libprovides "$pkgfile"
+            [[ -e ${pkgfile}.sig ]] && rm ${pkgfile}.sig
+            signfile ${pkgfile}
+            ln -sf ${pkgfile}{,.sig} $repo_path/
+            cd $repo_path
+            repo-add -R $repo.db.tar.xz ${pkgfile##*/}
+        fi
+    done
 }
 
-repo_lock(){
-    local repo="$1"
-    if [[ ! -f ${repos_local}/$repo/$repo.lock ]];then
-        warning "Locking %s" "$repo"
-        touch ${repos_local}/$repo/$repo.lock
-        update_lock "$repo"
-    fi
-}
-
-repo_unlock(){
-    local repo="$1"
-    if [[ -f ${repos_local}/$repo/$repo.lock ]];then
-        warning "Unlocking %s" "$repo"
-        rm ${repos_local}/$repo/$repo.lock
-        update_lock "$repo"
-    fi
-}
-
-repo_download(){
-    local repo="$1"
-    if is_locked "$repo"; then
-        die "The '%s' repository is locked" "$repo"
-    else
-        rsync "${rsync_args[@]}" "$(connect)${repos_remote}/$repo/" "${repos_local}/$repo/"
-    fi
-}
-
-repo_upload(){
-    local repo="$1"
-    repo_lock "$repo"
-    rsync "${rsync_args[@]}" "${repos_local}/$repo/" "$(connect)${repos_remote}/$repo/"
-    repo_unlock "$repo"
-}

lib/util-pkg-tree.sh

@@ -24,6 +24,7 @@ is_dirty() {
 
 sync_tree(){
     local branch="master" repo="$1"
+    git checkout $branch
     local local_head=$(get_local_head "$branch")
     local remote_head=$(get_remote_head "$branch")
     local timer=$(get_timer)
@@ -49,22 +50,8 @@ clone_tree(){
     show_elapsed_time "${FUNCNAME}" "${timer}"
 }
 
-sync_tree_artix(){
-    cd ${tree_dir_artix}
-        for repo in ${repo_tree_import[@]};do
-            if [[ -d ${repo} ]];then
-                cd ${repo}
-                    $(is_dirty) && die "[%s] has uncommited changes!" "${repo}"
-                    sync_tree "${repo}"
-                cd ..
-            else
-                clone_tree "${repo}" "${host_tree_artix}/${repo}"
-            fi
-        done
-    cd ..
-}
-
 sync_tree_arch(){
+    local repo="$1"
     cd ${tree_dir_arch}
         for repo in ${repo_tree_arch[@]};do
             if [[ -d ${repo} ]];then
@@ -78,15 +65,25 @@ sync_tree_arch(){
     cd ..
 }
 
-read_import_list(){
+sync_tree_artix(){
-    local name="$1"
+    local repo="$1"
-    local _space="s| ||g" _clean=':a;N;$!ba;s/\n/ /g' _com_rm="s|#.*||g"
+    cd ${tree_dir_artix}
-    import_list=$(sed "$_com_rm" "${list_dir_import}/$name.list" | sed "$_space" | sed "$_clean")
+        for repo in ${repo_tree_artix[@]};do
+            if [[ -d ${repo} ]];then
+                cd ${repo}
+                    sync_tree "${repo}"
+                cd ..
+            else
+                clone_tree "${repo}" "${host_tree_artix}/${repo}"
+            fi
+        done
+    cd ..
 }
 
-get_pkgver(){
+read_import_list(){
-    source PKGBUILD
+    local repo="$1"
-    echo $pkgver-$pkgrel
+    local _space="s| ||g" _clean=':a;N;$!ba;s/\n/ /g' _com_rm="s|#.*||g"
+    import_list=$(sed "$_com_rm" "${list_dir_import}/$repo.list" | sed "$_space" | sed "$_clean")
 }
 
 is_untracked(){
@@ -94,29 +91,123 @@ is_untracked(){
     return 0
 }
 
-import_from_arch(){
+patch_pkg(){
-    local timer=$(get_timer)
+    local pkg="$1"
-    for repo in ${repo_tree_import[@]};do
+    case $pkg in
-        read_import_list "$repo"
+        'glibc')
-        if [[ -n ${import_list[@]} ]];then
+            sed -e 's|{locale,systemd/system,tmpfiles.d}|{locale,tmpfiles.d}|' \
-            cd ${tree_dir_artix}/$repo
+                -e '/nscd.service/d' \
-#             git checkout master &> /dev/null
+                -i $pkg/PKGBUILD
-            $(is_dirty) && die "[%s] has uncommited changes!" "${repo}"
+        ;;
-            local arch_dir=packages
+        'bash')
-            [[ $repo == "galaxy-arch" ]] && arch_dir=community
+            sed -e 's|system.bash_logout)|system.bash_logout\n        artix.bashrc)|' \
-            msg "Import into [%s]" "$repo"
+                -e 's|etc/bash.|etc/bash/|g' \
-            for pkg in ${import_list[@]};do
+                -e 's|install -dm755 "$pkgdir"/etc/skel/|install -dm755 "$pkgdir"/etc/{skel,bash/bashrc.d}/|' \
-                rsync "${rsync_args[@]}" ${tree_dir_arch}/$arch_dir/$pkg/trunk/ ${tree_dir_artix}/$repo/$pkg/
+                -e 's|/etc/skel/.bash_logout|/etc/skel/.bash_logout\n  install -m644 artix.bashrc "$pkgdir"/etc/bash/bashrc.d/artix.bashrc|' \
-                if $(is_dirty) || $(is_untracked); then
+                -i $pkg/PKGBUILD
-                    git add $pkg
+
-                    cd $pkg
+            patch -p1 -i $DATADIR/patches/dot-bashrc.patch
-                        local ver=$(get_pkgver)
+            patch -p1 -i $DATADIR/patches/system-bashrc.patch
-                        msg2 "Archlinux import: [%s]" "$pkg-$ver"
+            patch -p1 -i $DATADIR/patches/system-bashrc_logout.patch
-                        git commit -m "Archlinux import: $pkg-$ver"
+            patch -p1 -i $DATADIR/patches/artix-bashrc.patch
-                    cd ..
+            cd $pkg
-                fi
+                updpkgsums
-            done
+            cd ..
+        ;;
+        'tp_smapi'|'acpi_call'|'r8168')
+            sed -e 's|-ARCH|-ARTIX|g' -i $pkg/PKGBUILD
+        ;;
+    esac
+}
+
+get_import_path(){
+    local arch_dir arch_repo import_path
+    local repo="$1" pkg="$2" src=
+    case $repo in
+        system|world)
+            arch_dir=packages
+            [[ "$repo" == 'system' ]] && arch_repo=core
+            [[ "$repo" == 'world' ]] && arch_repo=extra
+            import_path=${tree_dir_arch}/$arch_dir/$pkg/repos
+            src=$import_path/$arch_repo-x86_64
+            [[ -d $import_path/testing-x86_64 ]] && src=$import_path/testing-x86_64
+            [[ -d $import_path/$arch_repo-any ]] && src=$import_path/$arch_repo-any
+            [[ -d $import_path/testing-any ]] && src=$import_path/testing-any
+        ;;
+        galaxy)
+            arch_repo=community
+            arch_dir=$arch_repo
+            import_path=${tree_dir_arch}/$arch_dir/$pkg/repos/$arch_repo
+            src=$import_path-x86_64
+            [[ -d $import_path-testing-x86_64 ]] && src=$import_path-testing-x86_64
+            [[ -d $import_path-any ]] && src=$import_path-any
+            [[ -d $import_path-testing-any ]] && src=$import_path-testing-any
+        ;;
+        lib32)
+            arch_repo=multilib
+            arch_dir=community
+            import_path=${tree_dir_arch}/$arch_dir/$pkg/repos
+            src=$import_path/$arch_repo-x86_64
+            [[ -d $import_path/$arch_repo-testing-x86_64 ]] && src=$import_path/$arch_repo-testing-x86_64
+        ;;
+    esac
+    echo $src
+}
+
+show_version_table(){
+    local repo="$1"
+    declare -A UPDATES
+    msg_table_header "%-30s %-30s %-30s %-30s" "Repository" "Package" "Artix version" "Arch version"
+    for pkg in ${tree_dir_artix}/$repo/*; do
+        if [[ -f $pkg/PKGBUILD ]];then
+            source $pkg/PKGBUILD 2>/dev/null
+            package=${pkg##*/}
+            artixver=$(get_full_version $package)
+            local src=$(get_import_path "$repo" "$package")
+            if [[ -f $src/PKGBUILD ]];then
+                source $src/PKGBUILD 2>/dev/null
+                archver=$(get_full_version $package)
+            fi
+            if [ $(vercmp $artixver $archver) -lt 0 ];then
+                UPDATES[$package]="$pkg/PKGBUILD $src/PKGBUILD"
+                msg_row_update "%-30s %-30s %-30s %-30s" "$repo" "$package" "$artixver" "$archver"
+            fi
         fi
+        unset pkgver epoch pkgrel artixver archver package
     done
+    find "${patches_dir}/$repo/" -name *.patch -delete
+    for upd in "${!UPDATES[@]}"; do
+        msg "Writing %s update patch ..." "$upd"
+        diff -u ${UPDATES[$upd]} > ${patches_dir}/$repo/"$upd"-archlinux.patch
+    done
+}
+
+import_from_arch(){
+    local timer=$(get_timer) branch='testing' repo="$1" push="$2"
+    read_import_list "$repo"
+    if [[ -n ${import_list[@]} ]];then
+        cd ${tree_dir_artix}/$repo
+        git checkout $branch &> /dev/null
+        $(is_dirty) && die "[%s] has uncommited changes!" "${repo}"
+        git pull origin "$branch"
+        for pkg in ${import_list[@]};do
+            local src=$(get_import_path "$repo" "$pkg") dest=${tree_dir_artix}/$repo/$pkg
+            source $src/PKGBUILD 2>/dev/null
+            local ver=$(get_full_version $pkg)
+            msg "Package: %s-%s" "$pkg" "$ver"
+            msg2 "src: %s" "$src"
+            msg2 "dest: %s" "$dest"
+            rsync "${rsync_args[@]}"  $src/ $dest/
+            patch_pkg "$pkg"
+#             if ${push};then
+#                 local timeout=10
+#                 git add "$pkg"
+#                 git commit -m "$pkg-$ver"
+#                 sleep $timeout
+#                 git push origin "$branch"
+#             fi
+            unset pkgver epoch pkgrel ver
+        done
+    fi
     show_elapsed_time "${FUNCNAME}" "${timer}"
 }

lib/util-pkg.sh

@@ -9,15 +9,6 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-in_array() {
-    local needle=$1; shift
-    local item
-    for item in "$@"; do
-        [[ $item = $needle ]] && return 0 # Found
-    done
-    return 1 # Not Found
-}
-
 # $1: sofile
 # $2: soarch
 process_sofile() {
@@ -45,39 +36,15 @@ pkgver_equal() {
     fi
 }
 
-get_full_version() {
-    # set defaults if they weren't specified in buildfile
-    pkgbase=${pkgbase:-${pkgname[0]}}
-    epoch=${epoch:-0}
-    if [[ -z $1 ]]; then
-        if [[ $epoch ]] && (( ! $epoch )); then
-            echo $pkgver-$pkgrel
-        else
-            echo $epoch:$pkgver-$pkgrel
-        fi
-    else
-        for i in pkgver pkgrel epoch; do
-            local indirect="${i}_override"
-            eval $(declare -f package_$1 | sed -n "s/\(^[[:space:]]*$i=\)/${i}_override=/p")
-            [[ -z ${!indirect} ]] && eval ${indirect}=\"${!i}\"
-        done
-        if (( ! $epoch_override )); then
-            echo $pkgver_override-$pkgrel_override
-        else
-            echo $epoch_override:$pkgver_override-$pkgrel_override
-        fi
-    fi
-}
-
 find_cached_package() {
-    local searchdirs=("$PWD" "$PKGDEST") results=()
+    local searchdirs=("$PKGDEST" "$PWD") results=()
     local targetname=$1 targetver=$2 targetarch=$3
     local dir pkg pkgbasename name ver rel arch r results
 
     for dir in "${searchdirs[@]}"; do
         [[ -d $dir ]] || continue
 
-        for pkg in "$dir"/*.pkg.tar.xz; do
+        for pkg in "$dir"/*.pkg.tar.?z; do
             [[ -f $pkg ]] || continue
 
             # avoid adding duplicates of the same inode
@@ -87,7 +54,7 @@ find_cached_package() {
 
             # split apart package filename into parts
             pkgbasename=${pkg##*/}
-            pkgbasename=${pkgbasename%.pkg.tar?(.?z)}
+            pkgbasename=${pkgbasename%.pkg.tar.?z}
 
             arch=${pkgbasename##*-}
             pkgbasename=${pkgbasename%-"$arch"}
@@ -107,16 +74,16 @@ find_cached_package() {
 
     case ${#results[*]} in
         0)
-        return 1
+            return 1
         ;;
         1)
-        printf '%s\n' "$results"
+            printf '%s\n' "${results[0]}"
-        return 0
+            return 0
         ;;
         *)
-        error 'Multiple packages found:'
+            error 'Multiple packages found:'
-        printf '\t%s\n' "${results[@]}" >&2
+            printf '\t%s\n' "${results[@]}" >&2
-        return 1
+            return 1
         ;;
     esac
 }

lib/util-yaml-check.sh

@@ -1,61 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-import ${LIBDIR}/util-yaml.sh
-
-write_netgroup_yaml(){
-    local name="$1" yaml="$2"
-    msg2 "Writing %s ..." "${yaml##*/}"
-    echo "---" > "$yaml"
-    echo "- name: '$name'" >> "$yaml"
-    echo "  description: '$name'" >> "$yaml"
-    echo "  selected: false" >> "$yaml"
-    echo "  hidden: false" >> "$yaml"
-    echo "  critical: false" >> "$yaml"
-    echo "  packages:" >> "$yaml"
-    for p in ${packages[@]};do
-        echo "       - $p" >> "$yaml"
-    done
-}
-
-write_pacman_group_yaml(){
-    local group="$1"
-    packages=$(pacman -Sgq "$group")
-    prepare_dir "${cache_dir_netinstall}/pacman"
-    write_netgroup_yaml "$group" "${cache_dir_netinstall}/pacman/$group.yaml"
-}
-
-gen_fn(){
-    echo "${yaml_dir}/$1-${target_arch}-${initsys}.yaml"
-}
-
-prepare_build(){
-    local profile_dir=${run_dir}/${profile}
-
-    load_profile "${profile_dir}"
-
-    yaml_dir=${cache_dir_netinstall}/${profile}/${target_arch}
-
-    prepare_dir "${yaml_dir}"
-}
-
-build(){
-    prepare_build
-    load_pkgs "${root_list}" "${target_arch}" "${initsys}" "${kernel}"
-    write_netgroup_yaml "${profile}" "$(gen_fn "Packages-Root")"
-    if [[ -f "${desktop_list}" ]]; then
-        load_pkgs "${desktop_list}" "${target_arch}" "${initsys}" "${kernel}"
-        write_netgroup_yaml "${profile}" "$(gen_fn "Packages-Desktop")"
-    fi
-    ${calamares} && configure_calamares "${yaml_dir}"
-    reset_profile
-    unset yaml_dir
-}

lib/util-yaml.sh

@@ -1,222 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-write_machineid_conf(){
-    local conf="${modules_dir}/machineid.conf"
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo '---' > "$conf"
-    echo "systemd: false" >> $conf
-    echo "dbus: true" >> $conf
-    echo "symlink: true" >> $conf
-}
-
-write_finished_conf(){
-    msg2 "Writing %s ..." "finished.conf"
-    local conf="${modules_dir}/finished.conf" cmd="loginctl reboot"
-    echo '---' > "$conf"
-    echo 'restartNowEnabled: true' >> "$conf"
-    echo 'restartNowChecked: false' >> "$conf"
-    echo "restartNowCommand: \"${cmd}\"" >> "$conf"
-}
-
-get_preset(){
-    local p=${tmp_dir}/${kernel}.preset
-    cp ${DATADIR}/linux.preset $p
-    sed -e "s|@kernel@|$kernel|g" \
-        -e "s|@arch@|${target_arch}|g"\
-        -i $p
-    echo $p
-}
-
-write_bootloader_conf(){
-    local conf="${modules_dir}/bootloader.conf" efi_boot_loader='grub'
-    msg2 "Writing %s ..." "${conf##*/}"
-    source "$(get_preset)"
-    echo '---' > "$conf"
-    echo "efiBootLoader: \"${efi_boot_loader}\"" >> "$conf"
-    echo "kernel: \"${ALL_kver#*/boot}\"" >> "$conf"
-    echo "img: \"${default_image#*/boot}\"" >> "$conf"
-    echo "fallback: \"${fallback_image#*/boot}\"" >> "$conf"
-    echo 'timeout: "10"' >> "$conf"
-    echo "kernelLine: \", with ${kernel}\"" >> "$conf"
-    echo "fallbackKernelLine: \", with ${kernel} (fallback initramfs)\"" >> "$conf"
-    echo 'grubInstall: "grub-install"' >> "$conf"
-    echo 'grubMkconfig: "grub-mkconfig"' >> "$conf"
-    echo 'grubCfg: "/boot/grub/grub.cfg"' >> "$conf"
-    echo '#efiBootloaderId: "dirname"' >> "$conf"
-}
-
-write_servicescfg_conf(){
-    local conf="${modules_dir}/servicescfg.conf"
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo '---' >  "$conf"
-    echo '' >> "$conf"
-    echo 'services:' >> "$conf"
-    echo '    enabled:' >> "$conf"
-    for s in ${openrc_boot[@]};do
-        echo "      - name: $s" >> "$conf"
-        echo '        runlevel: boot' >> "$conf"
-    done
-    for s in ${openrc_default[@]};do
-        echo "      - name: $s" >> "$conf"
-        echo '        runlevel: default' >> "$conf"
-    done
-}
-
-write_displaymanager_conf(){
-    local conf="${modules_dir}/displaymanager.conf"
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo "---" > "$conf"
-    echo "displaymanagers:" >> "$conf"
-    echo "  - lightdm" >> "$conf"
-    echo "  - gdm" >> "$conf"
-    echo "  - mdm" >> "$conf"
-    echo "  - sddm" >> "$conf"
-    echo "  - lxdm" >> "$conf"
-    echo "  - slim" >> "$conf"
-    echo '' >> "$conf"
-    echo "basicSetup: false" >> "$conf"
-}
-
-write_initcpio_conf(){
-    local conf="${modules_dir}/initcpio.conf"
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo "---" > "$conf"
-    echo "kernel: ${kernel}" >> "$conf"
-}
-
-write_users_conf(){
-    local conf="${modules_dir}/users.conf"
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo "---" > "$conf"
-    echo "defaultGroups:" >> "$conf"
-    local IFS=','
-    for g in ${addgroups[@]};do
-        echo "    - $g" >> "$conf"
-    done
-    unset IFS
-    echo "autologinGroup:  autologin" >> "$conf"
-    echo "doAutologin:     false" >> "$conf" # can be either 'true' or 'false'
-    echo "sudoersGroup:    wheel" >> "$conf"
-    echo "setRootPassword: true" >> "$conf" # must be true, else some options get hidden
-    echo "doReusePassword: false" >> "$conf" # only used in old 'users' module
-    echo "availableShells: /bin/bash, /bin/zsh" >> "$conf" # only used in new 'users' module
-    echo "avatarFilePath:  ~/.face" >> "$conf" # mostly used file-name for avatar
-}
-
-write_welcome_conf(){
-    local conf="${modules_dir}/welcome.conf"
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo "---" > "$conf" >> "$conf"
-    echo "showSupportUrl:         true" >> "$conf"
-    echo "showKnownIssuesUrl:     true" >> "$conf"
-    echo "showReleaseNotesUrl:    true" >> "$conf"
-    echo '' >> "$conf"
-    echo "requirements:" >> "$conf"
-    echo "    requiredStorage:    7.9" >> "$conf"
-    echo "    requiredRam:        1.0" >> "$conf"
-    echo "    internetCheckUrl:   https://github.com/cromnix" >> "$conf"
-    echo "    check:" >> "$conf"
-    echo "      - storage" >> "$conf"
-    echo "      - ram" >> "$conf"
-    echo "      - power" >> "$conf"
-    echo "      - internet" >> "$conf"
-    echo "      - root" >> "$conf"
-    echo "    required:" >> "$conf"
-    echo "      - storage" >> "$conf"
-    echo "      - ram" >> "$conf"
-    echo "      - root" >> "$conf"
-    echo "      - internet" >> "$conf"
-}
-
-write_umount_conf(){
-    local conf="${modules_dir}/umount.conf"
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo "---" > "$conf"
-    echo 'srcLog: "/root/.cache/Calamares/Calamares/Calamares.log"' >> "$conf"
-    echo 'destLog: "/var/log/Calamares.log"' >> "$conf"
-}
-
-get_yaml(){
-    echo "netgroups-${initsys}.yaml"
-}
-
-write_netinstall_conf(){
-    local conf="${modules_dir}/netinstall.conf"
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo "---" > "$conf"
-    echo "groupsUrl: ${netgroups}/$(get_yaml)" >> "$conf"
-}
-
-write_locale_conf(){
-    local conf="${modules_dir}/locale.conf"
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo "---" > "$conf"
-    echo "localeGenPath: /etc/locale.gen" >> "$conf"
-    echo "geoipUrl: freegeoip.net" >> "$conf"
-}
-
-write_settings_conf(){
-    local conf="$1/etc/calamares/settings.conf"
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo "---" > "$conf"
-    echo "modules-search: [ local ]" >> "$conf"
-    echo '' >> "$conf"
-    echo "sequence:" >> "$conf"
-    echo "    - show:" >> "$conf"
-    echo "        - welcome" >> "$conf" && write_welcome_conf
-    echo "        - locale" >> "$conf" && write_locale_conf
-    echo "        - keyboard" >> "$conf"
-    echo "        - partition" >> "$conf"
-    echo "        - users" >> "$conf" && write_users_conf
-    echo "        - netinstall" >> "$conf" && write_netinstall_conf
-    echo "        - summary" >> "$conf"
-    echo "    - exec:" >> "$conf"
-    echo "        - partition" >> "$conf"
-    echo "        - mount" >> "$conf"
-    echo "        - chrootcfg" >> "$conf"
-    echo "        - networkcfg" >> "$conf"
-    echo "        - machineid" >> "$conf" && write_machineid_conf
-    echo "        - fstab" >> "$conf"
-    echo "        - locale" >> "$conf"
-    echo "        - keyboard" >> "$conf"
-    echo "        - localecfg" >> "$conf"
-    echo "        - luksopenswaphookcfg" >> "$conf"
-    echo "        - luksbootkeyfile" >> "$conf"
-    echo "        - initcpiocfg" >> "$conf"
-    echo "        - initcpio" >> "$conf" && write_initcpio_conf
-    echo "        - users" >> "$conf"
-    echo "        - displaymanager" >> "$conf" && write_displaymanager_conf
-    echo "        - hwclock" >> "$conf"
-    case ${initsys} in
-        'openrc') echo "        - servicescfg" >> "$conf" && write_servicescfg_conf ;;
-    esac
-    echo "        - grubcfg" >> "$conf"
-    echo "        - bootloader" >> "$conf" && write_bootloader_conf
-    echo "        - postcfg" >> "$conf"
-    echo "        - umount" >> "$conf" && write_umount_conf
-    echo "    - show:" >> "$conf"
-    echo "        - finished" >> "$conf" && write_finished_conf
-    echo '' >> "$conf"
-    echo "branding: ${os_id}" >> "$conf"
-    echo '' >> "$conf"
-    echo "prompt-install: false" >> "$conf"
-    echo '' >> "$conf"
-    echo "dont-chroot: false" >> "$conf"
-}
-
-configure_calamares(){
-    info "Configuring [Calamares]"
-    modules_dir=$1/etc/calamares/modules
-    prepare_dir "${modules_dir}"
-    write_settings_conf "$1"
-    info "Done configuring [Calamares]"
-}

lib/util.sh

@@ -37,16 +37,6 @@ prepare_dir(){
     [[ ! -d $1 ]] && mkdir -p $1
 }
 
-get_release(){
-    source /etc/lsb-release
-    echo "${DISTRIB_RELEASE}"
-}
-
-get_distname(){
-    source /etc/lsb-release
-    echo "${DISTRIB_ID%Linux}"
-}
-
 get_disturl(){
     source /usr/lib/os-release
     echo "${HOME_URL}"
@@ -64,24 +54,10 @@ get_osid(){
 
 init_artools_base(){
 
-    [[ -z ${target_arch} ]] && target_arch=$(uname -m)
+    target_arch=$(uname -m)
 
     [[ -z ${chroots_dir} ]] && chroots_dir='/var/lib/artools'
 
-    [[ -z ${build_mirror} ]] && build_mirror='https://downloads.sourceforge.net/project/artix-linux/repos'
-
-    log_dir='/var/log/artools'
-
-    tmp_dir='/tmp'
-
-    host="sourceforge.net"
-
-    [[ -z ${host_mirrors[@]} ]] && host_mirrors=('netcologne' 'freefr' 'netix' 'kent' '10gbps-io')
-
-    [[ -z ${project} ]] && project="artix-linux"
-
-    [[ -z ${account} ]] && account="[SetUser]"
-
     [[ -z ${workspace_dir} ]] && workspace_dir=/home/${OWNER}/artools-workspace
 
     prepare_dir "${workspace_dir}"
@@ -91,9 +67,7 @@ init_artools_pkg(){
 
     [[ -z ${tree_dir_artix} ]] && tree_dir_artix=${workspace_dir}/artix
 
-    [[ -z ${repo_tree_artix[@]} ]] && repo_tree_artix=('system' 'world' 'galaxy')
+    [[ -z ${repo_tree_artix[@]} ]] && repo_tree_artix=('system' 'world' 'galaxy' 'lib32')
-
-    [[ -z ${repo_tree_import[@]} ]] && repo_tree_import=('system-arch' 'world-arch' 'galaxy-arch')
 
     [[ -z ${host_tree_artix} ]] && host_tree_artix='https://github.com/artix-linux'
 
@@ -109,44 +83,32 @@ init_artools_pkg(){
 
     chroots_pkg="${chroots_dir}/buildpkg"
 
-    list_dir_pkg="${SYSCONFDIR}/pkg.list.d"
+    [[ -z ${patches_dir} ]] && patches_dir=${workspace_dir}/archlinux-patches
 
-    make_conf_dir="${SYSCONFDIR}/make.conf.d"
+    [[ -z ${repos_root} ]] && repos_root="${workspace_dir}/repos"
-
-    [[ -d ${AT_USERCONFDIR}/pkg.list.d ]] && list_dir_pkg=${AT_USERCONFDIR}/pkg.list.d
-
-    cache_dir_pkg=${workspace_dir}/pkg
-
-    prepare_dir "${cache_dir_pkg}"
-
-    repository='system'
-
-    [[ -z ${repos_local} ]] && repos_local="${workspace_dir}/repos"
-
-    repos_remote="/${repos_local##*/}"
 }
 
 init_artools_iso(){
     chroots_iso="${chroots_dir}/buildiso"
 
-    cache_dir_iso="${workspace_dir}/iso"
+    [[ -z ${iso_pool} ]] && iso_pool="${workspace_dir}/iso"
 
-    prepare_dir "${cache_dir_iso}"
+    prepare_dir "${iso_pool}"
 
-    [[ -z ${profile} ]] && profile='base'
+    profile='base'
 
-    [[ -z ${dist_release} ]] && dist_release=$(get_release)
+    [[ -z ${iso_version} ]] && iso_version=$(date +%Y%m%d)
 
-    dist_name=$(get_distname)
+    iso_name=$(get_osid)
 
-    os_id=$(get_osid)
+    iso_label="ARTIX_$(date +%Y%m)"
-
-    [[ -z ${dist_branding} ]] && dist_branding="ARTIX"
 
     [[ -z ${initsys} ]] && initsys="openrc"
 
     [[ -z ${kernel} ]] && kernel="linux-lts"
 
+    [[ -z ${kernel_args} ]] && kernel_args=""
+
     [[ -z ${gpgkey} ]] && gpgkey=''
 
     [[ -z ${uplimit} ]] && uplimit=100
@@ -155,6 +117,14 @@ init_artools_iso(){
 
     [[ -z ${piece_size} ]] && piece_size=21
 
+    [[ -z ${file_host} ]] && file_host="sourceforge.net"
+
+    [[ -z ${project} ]] && project="artix-linux"
+
+    [[ -z ${account} ]] && account="[SetUser]"
+
+    [[ -z ${host_mirrors[@]} ]] && host_mirrors=('netcologne' 'freefr' 'netix' 'kent' '10gbps-io')
+
     torrent_meta="$(get_osname)"
 }
 
@@ -227,8 +197,3 @@ check_root() {
         exec su root -c "$(printf ' %q' "${orig_argv[@]}")"
     fi
 }
-
-connect(){
-    local home="/home/frs/project/${project}"
-    echo "${account},${project}@frs.${host}:${home}"
-}