increment version

This sets up for the release of openrc-0.11.3. The release will be
tagged when it is ready.

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.11
+VERSION=	0.11.3
 PKG=		${NAME}-${VERSION}

conf.d/Makefile

@@ -1,5 +1,6 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount urandom tmpfilesd ${CONF-${OS}}
+CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
+		${CONF-${OS}}
 
 ifeq (${MKNET},)
 CONF+= network staticroute

conf.d/netmount

@@ -0,0 +1,20 @@
+# Depending on how mounting your network file systems behaves when your
+# network interfaces are down, you may need to set the netmount script to
+# require  specific network interfaces to be active. This file gives
+# examples of how to do this:
+#
+# If you are using newnet and configuring the interface with a static
+# address with the network script:
+# rc_need="network"
+#
+# If you are using oldnet, you must list the specific net.* services you
+# need:
+#
+# rc_need="net.eth0"
+# rc_need="net.eth1 net.eth2"
+#
+# If you are using a dynamic network management tool like
+# networkmanager, dhcpcd, etc, you should list that tool here.
+#
+# rc_need="networkmanager"
+# rc_need="dhcpcd"

doc/net.example.BSD.in

@@ -80,9 +80,9 @@
 # Most drivers that report carrier status function correctly, but some do not
 # One of these faulty drivers is for the Intel e1000 network card, but only
 # at boot time. To get around this you may alter the carrier_timeout value for
-# the interface. -1 is disable, 0 is infinite and any other number of seconds
+# the interface. 0 is disable and any other number of seconds is how
-# is how long we wait for carrier. The current default is 3 seconds
+# long we wait for carrier. The current default is disabled.
-#carrier_timeout_eth0=-1
+#carrier_timeout_eth0=0
 
 # You may wish to disable the interface being brought down when stopping.
 # This is only of use for WakeOnLan.

doc/net.example.Linux.in

@@ -126,6 +126,13 @@
 # tables you may have to set a global metric as the due to a simple read of
 # the routing table taking over a minute at a time.
 
+# Most drivers that report carrier status function correctly, but some do not
+# One of these faulty drivers is for the Intel e1000 network card, but only
+# at boot time. To get around this you may alter the carrier_timeout value for
+# the interface. 0 is disable and any other number of seconds is how
+# long we wait for carrier. The current default is disabled.
+#carrier_timeout_eth0=0
+
 # You may wish to disable the interface being brought down when stopping.
 # This is only of use for WakeOnLan.
 #ifdown_eth0="NO"

etc/rc.conf.in

@@ -94,6 +94,10 @@
 # These variables are documented here, but should be configured in
 # /etc/conf.d/foo for service foo and NOT enabled here unless you
 # really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
 
 # Some daemons are started and stopped via start-stop-daemon.
 # We can set some things on a per service basis, like the nicelevel.
@@ -116,6 +120,13 @@
 #rc_foo_need="openvpn"
 #rc_foo_after="clock"
 
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
 # You can also remove dependencies.
 # This is mainly used for saying which servies do NOT provide net.
 #rc_net_tap0_provide="!net"

init.d/.gitignore

@@ -41,5 +41,4 @@ syslogd
 termencoding
 ttys
 wscons
-tmpfilesd.boot
+tmpfiles.setup
-tmpfilesd.sysinit

init.d/Makefile

@@ -1,8 +1,7 @@
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
 	root.in savecache.in swap.in swapfiles.in \
-	tmpfilesd.boot.in tmpfilesd.sysinit.in \
+	tmpfiles.setup.in swclock.in sysctl.in urandom.in ${SRCS-${OS}}
-	swclock.in sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
 # Build our old net foo or not

init.d/devfs.in

@@ -5,8 +5,8 @@
 description="Mount system critical filesystems in /dev."
 
 depend() {
-	use dev-mount udev-mount
+	use dev-mount
-	before udev mdev
+	before dev
 	keyword -prefix -vserver
 }
 

init.d/net.lo.in

@@ -108,7 +108,7 @@ _wait_for_carrier()
 	_has_carrier  && return 0
 
 	eval timeout=\$carrier_timeout_${IFVAR}
-	timeout=${timeout:-${carrier_timeout:-5}}
+	timeout=${timeout:-${carrier_timeout:-0}}
 
 	# Incase users don't want this nice feature ...
 	[ ${timeout} -le 0 ] && return 0

init.d/netmount.in

@@ -10,7 +10,6 @@ description="Mounts network shares, other than NFS, according to /etc/fstab."
 depend()
 {
 	config /etc/fstab
-	need net
 	use afc-client amd autofs openvpn
 	use dns
 	keyword -jail -prefix -vserver

init.d/tmpfiles.setup.in

@@ -2,7 +2,7 @@
 # Copyright 1999-2012 Gentoo Foundation
 # Released under the 2-clause BSD license.
 
-description="Create tmpfiles.d entries (boot)"
+description="set up tmpfiles.d entries"
 
 depend()
 {
@@ -11,8 +11,8 @@ depend()
 
 start()
 {
-	ebegin "${description/Create/Creating}"
+	ebegin "setting up tmpfiles.d entries"
-	@LIBEXECDIR@/sh/tmpfiles.sh --create ${tmpfiles_opts}
+	@LIBEXECDIR@/sh/tmpfiles.sh --create --remove ${tmpfiles_opts}
 	eend $?
 	return 0
 }

init.d/tmpfilesd.sysinit.in

@@ -1,20 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 1999-2012 Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-description="Create tmpfiles.d entries (sysinit)"
-
-depend()
-{
-	# Convert to 'need dev' when the new udev is ready, for OpenRC 0.11
-	#need dev-mount
-	need dev
-}
-
-start()
-{
-	ebegin "${description/Create/Creating}"
-	@LIBEXECDIR@/sh/tmpfiles.sh --create ${tmpfiles_opts}
-	eend $?
-	return 0
-}

man/rc-status.8

@@ -46,7 +46,7 @@ Show all runlevels and their services.
 List all services that have crashed.
 .It Fl l , -list
 List all defined runlevels.
-.It fl r , -runlevel
+.It Fl r , -runlevel
 Print the current runlevel name.
 .It Fl s , -servicelist
 Show all services.

runlevels/Makefile

@@ -38,9 +38,9 @@ BOOT-FreeBSD+=	hostid newsyslog savecore syslogd
 # FreeBSD specific stuff
 BOOT-FreeBSD+=	adjkerntz dumpon syscons
 
-BOOT-Linux+=	hwclock keymaps modules mtab procfs termencoding tmpfilesd.boot
+BOOT-Linux+=	hwclock keymaps modules mtab procfs termencoding tmpfiles.setup
 SHUTDOWN-Linux=	killprocs mount-ro
-SYSINIT-Linux=	devfs dmesg sysfs tmpfilesd.sysinit
+SYSINIT-Linux=	devfs dmesg sysfs
 
 # Generic BSD stuff
 BOOT-NetBSD+=	hostid newsyslog savecore syslogd

sh/tmpfiles.sh.in

@@ -61,7 +61,7 @@ _f() {
 
 	if [ ! -e "$path" ]; then
 		dryrun_or_real install -m"$mode" -o"$uid" -g"$gid" /dev/null "$path"
-		[ -n "$arg" ] && _w "$@"
+		[ -z "$arg" ] || _w "$@"
 	fi
 }
 
@@ -72,7 +72,7 @@ _F() {
 	[ $CREATE -gt 0 ] || return 0
 
 	dryrun_or_real install -m"$mode" -o"$uid" -g"$gid" /dev/null "$path"
-	[ -n "$arg" ] && _w "$@"
+	[ -z "$arg" ] || _w "$@"
 }
 
 _d() {
@@ -201,6 +201,7 @@ tmpfiles_d=''
 # `/run/tmpfiles/foo.conf' will always be read after `/etc/tmpfiles.d/bar.conf'
 for d in ${tmpfiles_dirs} ; do
 	[ -d $d ] && for f in ${d}/*.conf ; do
+		[ "$f" = "$d/systemd.conf" ] && continue
 		[ -f $f ] && tmpfiles_basenames="${tmpfiles_basenames}\n${f##*/}"
 	done # for f in ${d}
 done # for d in ${tmpfiles_dirs}
@@ -252,46 +253,34 @@ for FILE in $tmpfiles_d ; do
 
 	# XXX: Upstream says whitespace is NOT permitted in the Path argument.
 	# But IS allowed when globs are expanded for the x/r/R/z/Z types.
-	while read line; do
+	while read cmd path mode uid gid age arg; do
 		LINENUM=$(( LINENUM+1 ))
 
-		# This will skip over comments and empty lines
-		set -- $line
-
 		# Unless we have both command and path, skip this line.
-		if [ -z "$1" -o -z "$2" ]; then
+		if [ -z "$cmd" -o -z "$path" ]; then
 			continue
 		fi
 
 		# whine about invalid entries
-		case $1 in
+		case $cmd in
 			f|F|w|d|D|p|L|c|b|x|r|R|z|Z) ;;
 			\#) continue ;;
 			*) warninvalid ; continue ;;
 		esac
 
-		cmd=$1
-		path=$2
-
 		# fall back on defaults when parameters are passed as '-'
-		if [ "$3" = '-' -o "$3" = '' ]; then
+		if [ "$mode" = '-' -o "$mode" = '' ]; then
-			case ${1} in
+			case "$cmd" in
 				p|f|F) mode=0644 ;;
 				d|D) mode=0755 ;;
 				z|Z|x|r|R|L) ;;
 			esac
-		else
-			mode=$3
 		fi
-		uid=$4
-		gid=$5
-		age=$6
-		arg=$7
 
-		[ "${4}" = '-' -o "${4}" = '' ] && uid=0
+		[ "$uid" = '-' -o "$uid" = '' ] && uid=0
-		[ "${5}" = '-' -o "${5}" = '' ] && gid=0
+		[ "$gid" = '-' -o "$gid" = '' ] && gid=0
-		[ "${6}" = '-' -o "${6}" = '' ] && age=0
+		[ "$age" = '-' -o "$age" = '' ] && age=0
-		[ "${7}" = '-' -o "${7}" = '' ] && arg=''
+		[ "$arg" = '-' -o "$arg" = '' ] && arg=''
 		set -- "$path" "$mode" "$uid" "$gid" "$age" "$arg"
 
 		[ "$VERBOSE" -eq "1" ] && echo _$cmd "$@"

src/rc/checkpath.c

@@ -133,7 +133,7 @@ do_check(char *path, uid_t uid, gid_t gid, mode_t mode, inode_t type,
 	}
 
 	if (mode && (st.st_mode & 0777) != mode) {
-		einfo("%s: correcting mode", applet);
+		einfo("%s: correcting mode", path);
 		if (chmod(path, mode)) {
 			eerror("%s: chmod: %s", applet, strerror(errno));
 			return -1;

src/rc/mountinfo.c

@@ -390,11 +390,8 @@ mountinfo(int argc, char **argv)
 	char real_path[PATH_MAX + 1];
 	int opt;
 	int result;
-	bool quiet;
 	char *this_path;
 
-	quiet = rc_yesno(getenv("EINFO_QUIET"));
-
 #define DO_REG(_var)							      \
 	if (_var) free(_var);						      \
 	_var = get_regex(optarg);
@@ -483,7 +480,7 @@ mountinfo(int argc, char **argv)
 		if (skip_point_regex &&
 		    regexec(skip_point_regex, s->value, 0, NULL, 0) == 0)
 			continue;
-		if (! quiet)
+		if (! rc_yesno(getenv("EINFO_QUIET")))
 			printf("%s\n", s->value);
 		result = EXIT_SUCCESS;
 	}