update changelog

FEATURE-REMOVAL-SCHEDULE.md

@@ -38,7 +38,7 @@ Who:
 
 When: 1.0
 
-Why: Deprecated in favor of extra_commands, extra_started_commands
+Why: Depprecated in favor of extra_commands, extra_started_commands
 	 and extra_stopped_commands.
 
 Who:
@@ -47,7 +47,7 @@ Who:
 
 When: 1.0
 
-Why: Deprecated in favor of executable scripts in @SYSCONFDIR@/local.d
+Why: Depprecated in favor of executable scripts in @SYSCONFDIR@/local.d
 
 Who:
 
@@ -76,3 +76,13 @@ Why: The getline() function was standardized in POSIX.1-2008, so it
 
 Who:
 
+### rc_sys()
+
+When: 1.0
+
+Why: The OpenRC code now uses two internal functions, detect_container()
+	 and detect_vm() to handle this. rc_sys() is broken because it
+	 doesn't differentiate between containers and vm's.
+
+Who:
+

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.21.7
+VERSION=	0.20.1
 PKG=		${NAME}-${VERSION}

NEWS.md

@@ -3,33 +3,6 @@
 This file will contain a list of notable changes for each release. Note
 the information in this file is in reverse order.
 
-## OpenRC-0.21
-
-This version adds a daemon supervisor which can start daemons and
-restart them if they crash. See supervise-daemon-guide.md in the
-distribution for details on its use.
-
-It is now possible to mark certain mount points as critical. If these
-mount points are unable to be mounted, localmount or netmount will fail.
-This is handled in /etc/conf.d/localmount and /etc/conf.d/netmount. See
-these files for the setup.
-
-The deprecation messages in 0.13.x for runscript and rc are now
-made visible in preparation for the removal of these binaries in 1.0.
-
-The steps you should take to get rid of these warnings is to run openrc
-in initialization steps instead of rc and change the shebang lines in
-service scripts to refer to "openrc-run" instead of "runscript".
-
-In 0.21.4, a modules-load service was added. This works like the
-equivalent service in systemd. It looks for files named *.conf first in
-/usr/lib/modules-load.d, then /run/modules-load.d, then
-/etc/modules-load.d. These files contain a list of modules, one per
-line, which should be loaded into the kernel. If a file name appears in
-/run/modules-load.d, it overrides a file of the same name in
-/usr/lib/modules-load.d. A file appearing in /etc/modules-load.d
-overrides a file of the same name in both previous directories.
-
 ## OpenRC-0.19
 
 This version adds a net-online service. By default, this

conf.d/bootmisc

@@ -9,7 +9,7 @@ wipe_tmp="YES"
 # This may be useful if you need the kernel boot log afterwards
 log_dmesg="YES"
 
-# Save the previous dmesg log to dmesg.old
+# Save the previous dmesg log to dmesc.old
 # This may be useful if you need to compare the current boot to the
 # previous one.
 #previous_dmesg=no

conf.d/localmount

@@ -1,10 +1,3 @@
 # Stop the unmounting of certain points.
 # This could be useful for some NFS related work.
 #no_umounts="/dir1:/var/dir2"
-#
-# Mark certain mount points as critical.
-# This contains aspace separated list of mount points which should be
-# considered critical. If one of these mount points cannot be mounted,
-# localmount will fail.
-# By default, this is empty.
-#critical_mounts="/home /var"

conf.d/netmount

@@ -38,10 +38,3 @@
 # other words, please change it to be more suited to your system.
 #
 rc_need="net"
-#
-# Mark certain mount points as critical.
-# This contains aspace separated list of mount points which should be
-# considered critical. If one of these mount points cannot be mounted,
-# netmount will fail.
-# By default, this is empty.
-#critical_mounts="/home /var"

guide.md

@@ -1,251 +0,0 @@
-# Purpose and description
-
-OpenRC is an init system for Unixoid operating systems. It takes care of 
-startup and shutdown of the whole system, including services.
-
-It evolved out of the Gentoo "Baselayout" package which was a custom pure-shell 
-startup solution. (This was both hard to maintain and debug, and not very 
-performant)
-
-Most of the core parts are written in C99 for performance and flexibility 
-reasons, while everything else is posix sh.
-The License is 2-clause BSD
-
-Current size is about 10k LoC C, and about 4k LoC shell.
-
-OpenRC is known to work on Linux, many BSDs (FreeBSD, OpenBSD, DragonFlyBSD at 
-least) and HURD.
-
-Services are stateful (i.e. start; start will lead to "it's already started")
-
-# Startup
-
-Usually PID1 (aka. init) calls the OpenRC binary ("/sbin/openrc" by default).
-(The default setup assumes sysvinit for this)
-
-openrc scans the runlevels (default: "/etc/runlevels") and builds a dependency 
-graph, then starts the needed service scripts, either serialized (default) or in 
-parallel.
-
-When all the init scripts are started openrc terminates. There is no persistent 
-daemon. (Integration with tools like monit, runit or s6 can be done)
-
-# Shutdown
-
-On change to runlevel 0/6 or running "reboot", "halt" etc., openrc stops all 
-services that are started and runs the services in the "shutdown" runlevel.
-
-# Modifying Service Scripts
-
-Any service can, at any time, be started/stopped/restarted by executing 
-"rc-service someservice start", "rc-service someservice stop", etc.
-Another, less preferred method, is to run the service script directly,
-e.g. "/etc/init.d/service start", "/etc/init.d/service stop", etc.
-
-OpenRC will take care of dependencies, e.g starting apache will start network 
-first, and stopping network will stop apache first.
-
-There is a special command "zap" that makes OpenRC 'forget' that a service is 
-started; this is mostly useful to reset a crashed service to stopped state 
-without invoking the (possibly broken) stop function of the service script.
-
-Calling "openrc" without any arguments will try to reset all services so
-that the current runlevel is satisfied; if you manually started apache it will be 
-stopped, and if squid died but is in the current runlevel it'll be restarted.
-
-There is a "service" helper that emulates the syntax seen on e.g. older Redhat 
-and Ubuntu ("service nginx start" etc.)
-
-# Runlevels
-
-OpenRC has a concept of runlevels, similar to what sysvinit historically 
-offered. A runlevel is basically a collection of services that needs to be 
-started. Instead of random numbers they are named, and users can create their 
-own if needed. This allows, for example, to have a default runlevel with 
-"everything" enabled, and a "powersaving" runlevel where some services are 
-disabled.
-
-The "rc-status" helper will print all currently active runlevels and the state 
-of init scripts in them:
-
-# rc-status
- * Caching service dependencies ... [ ok ]
-Runlevel: default
- modules                     [  started  ]
- lvm                         [  started  ]
-
-All runlevels are represented as folders in /etc/runlevels/ with symlinks to 
-the actual init scripts.
-
-Calling openrc with an argument ("openrc default") will switch to that
-runlevel; this will start and stop services as needed.
-
-Managing runlevels is usually done through the "rc-update" helper, but could of 
-course be done by hand if desired.
-e.g. "rc-update add nginx default" - add nginx to the default runlevel
-Note: This will not auto-start nginx! You'd still have to trigger "rc" or run 
-the initscript by hand.
-
-FIXME: Document stacked runlevels
-
-The default startup uses the runlevels "boot", "sysinit" and "default", in that 
-order. Shutdown uses the "shutdown" runlevel.
-
-
-# Syntax of Service Scripts
-
-Service scripts are shell scripts. OpenRC aims at using only the standardized 
-POSIX sh subset for portability reasons. The default interpreter (build-time 
-toggle) is /bin/sh, so using for example mksh is not a problem.
-
-OpenRC has been tested with busybox sh, ash, dash, bash, mksh, zsh and possibly 
-others. Using busybox sh has been difficult as it replaces commands with 
-builtins that don't offer the expected features.
-
-The interpreter for initscripts is #!/sbin/openrc-run
-Not using this interpreter will break the use of dependencies and is not 
-supported. (iow: if you insist on using #!/bin/sh you're on your own)
-
-A "depend" function declares the dependencies of this service script.
-All scripts must have start/stop/status functions, but defaults are provided.
-Extra functions can be added easily:
-
-extra_commands="checkconfig"
-checkconfig() {
-	doSomething
-}
-
-This exports the checkconfig function so that "/etc/init.d/someservice 
-checkconfig" will be available, and it "just" runs this function.
-
-While commands defined in extra_commands are always available, commands
-defined in extra_started_commands will only work when the service is started
-and those defined in extra_stopped_commands will only work when the service is
-stopped. This can be used for implementing graceful reload and similar
-behaviour.
-
-Adding a restart function will not work, this is a design decision within 
-OpenRC. Since there may be dependencies involved (e.g. network -> apache) a 
-restart function is in general not going to work. 
-restart is internally mapped to stop() + start() (plus handling dependencies).
-If a service needs to behave differently when it is being restarted vs
-started or stopped, it should test the $RC_CMD variable, for example:
-
-    [ "$RC_CMD" = restart ] && do_something
-
-
-# The Depend Function
-
-This function declares the dependencies for a service script. This
-determines the order the service scripts start.
-
-depend() {
-	need net
-	use dns logger netmount
-	want coolservice
-}
-
-"need" declares a hard dependency - net always needs to be started before this 
-	service does
-"use" is a soft dependency - if dns, logger or netmount is in this runlevel 
-	start it before, but we don't care if it's not in this runlevel.
-	"want" is between need and use - try to start coolservice if it is
-	installed on the system, regardless of whether it is in the
-	runlevel, but we don't care if it starts.
-"before" declares that we need to be started before another service
-"after" declares that we need to be started after another service, without 
-	creating a dependency (so on calling stop the two are independent)
-"provide" allows multiple implementations to provide one service type, e.g.:
-	'provide cron' is set in all cron-daemons, so any one of them started 
-	satisfies a cron dependency
-"keyword" allows platform-specific overrides, e.g. "keyword -lxc" makes this 
-	service script a noop in lxc containers. Useful for things like keymaps, 
-	module loading etc. that are either platform-specific or not available 
-	in containers/virtualization/...
-
-FIXME: Anything missing in this list?
-
-# The Default Functions
-
-All service scripts are assumed to have the following functions:
-
-start()
-stop()
-status()
-
-There are default implementations in rc/sh/openrc-run.sh - this allows very 
-compact service scripts. These functions can be overridden per service script as 
-needed.
-
-The default functions assume the following variables to be set in the service 
-script:
-
-command=
-command_args=
-pidfile=
-
-Thus the 'smallest' service scripts can be half a dozen lines long
-
-# The Magic of Conf.d
-
-Most service scripts need default values. It would be fragile to
-explicitly source some arbitrary files. By convention openrc-run will source
-the matching file in /etc/conf.d/ for any script in /etc/init.d/
-
-This allows you to set random startup-related things easily. Example:
-
-conf.d/foo:
-START_OPTS="--extraparameter sausage"
-
-init.d/foo:
-start() {
-	/usr/sbin/foo-daemon ${STARTOPTS}
-}
-
-The big advantage of this split is that most of the time editing of the init 
-script can be avoided.
-
-# Start-Stop-Daemon
-
-OpenRC has its own modified version of s-s-d, which is historically related and 
-mostly syntax-compatible to Debian's s-s-d, but has been rewritten from scratch.
-
-It helps with starting daemons, backgrounding, creating PID files and many 
-other convenience functions related to managing daemons.
-
-# /etc/rc.conf
-
-This file manages the default configuration for OpenRC, and it has examples of 
-per-service-script variables.
-
-Among these are rc_parallel (for parallelized startup), rc_log (logs all boot 
-messages to a file), and a few others.
-
-# ulimit and CGroups
-
-Setting ulimit and nice values per service can be done through the rc_ulimit 
-variable.
-
-Under Linux, OpenRC can optionally use CGroups for process management.
-By default each service script's processes are migrated to their own CGroup.
-
-By changing certain values in the conf.d file limits can be enforced per 
-service. It is easy to find orphan processes of a service that persist after 
-stop(), but by default these will NOT be terminated.
-To change this add rc_cgroup_cleanup="yes" in the conf.d files for services 
-where you desire this functionality.
-
-# Caching
-
-For performance reasons OpenRC keeps a cache of pre-parsed initscript metadata
-(e.g. depend). The default location for this is /${RC_SVCDIR}/cache.
-
-The cache uses mtime to check for file staleness. Should any service script
-change it'll re-source the relevant files and update the cache
-
-# Convenience functions
-
-OpenRC has wrappers for many common output tasks in libeinfo.
-This allows to print colour-coded status notices and other things.
-To make the output consistent the bundled initscripts all use ebegin/eend to 
-print nice messages.

init.d/.gitignore

@@ -1,5 +1,4 @@
 binfmt
-modules-load
 bootmisc
 fsck
 hostname

init.d/Makefile

@@ -19,10 +19,10 @@ SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 		rpcbind.in savecore.in syslogd.in
 # These are FreeBSD specific
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
-		modules.in modules-load.in mixer.in nscd.in powerd.in syscons.in
+		mixer.in nscd.in powerd.in syscons.in
 
 SRCS-Linux=	binfmt.in devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
-		killprocs.in modules.in modules-load.in mount-ro.in mtab.in numlock.in \
+		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
 		procfs.in net-online.in sysfs.in termencoding.in tmpfiles.dev.in
 
 # Generic BSD scripts

init.d/binfmt.in

@@ -15,7 +15,7 @@ depend()
 {
 	after procfs
 	use modules devfs
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/consolefont.in

@@ -15,7 +15,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc modules
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 start()

init.d/devfs.in

@@ -15,7 +15,7 @@ depend()
 {
 	provide dev-mount
 	before dev
-	keyword -docker -lxc -prefix -systemd-nspawn -vserver
+	keyword -prefix -systemd-nspawn -vserver -lxc
 }
 
 mount_dev()

init.d/dmesg.in

@@ -14,7 +14,7 @@ description="Set the dmesg level for a cleaner boot"
 depend()
 {
 	before dev modules
-	keyword -docker -lxc -prefix -systemd-nspawn -vserver
+	keyword -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/fsck.in

@@ -16,7 +16,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -timeout -vserver -uml
+	keyword -jail -openvz -prefix -systemd-nspawn -timeout -vserver -lxc -uml
 }
 
 _abort() {

init.d/hostname.in

@@ -12,7 +12,7 @@
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -docker -lxc -prefix -systemd-nspawn
+	keyword -prefix -systemd-nspawn -lxc
 }
 
 start()

init.d/hwclock.in

@@ -35,7 +35,7 @@ depend()
 	else
 		before *
 	fi
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 setupopts()
@@ -69,16 +69,6 @@ _hwclock()
 	return 1
 }
 
-get_noadjfile()
-{
-	if ! yesno $clock_adjfile; then
-		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
-			echo --noadjfile
-		fi
-	fi
-}
-
 start()
 {
 	local retval=0 errstr=""
@@ -101,16 +91,16 @@ start()
 	fi
 
 	# Always set the kernel's time zone.
-	_hwclock --systz $utc_cmd $(get_noadjfile) $clock_args
+	_hwclock --systz $utc_cmd $clock_args
 	: $(( retval += $? ))
 
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
-		_hwclock --adjust $utc_cmd $(get_noadjfile)
+		_hwclock --adjust $utc_cmd
 		: $(( retval += $? ))
 	fi
 
 	if yesno ${clock_hctosys:-YES}; then
-		_hwclock --hctosys $utc_cmd $(get_noadjfile) $clock_args
+		_hwclock --hctosys $utc_cmd $clock_args
 		: $(( retval += $? ))
 	fi
 
@@ -132,7 +122,14 @@ stop()
 
 	ebegin "Setting hardware clock using the system clock" "[$utc]"
 
-	_hwclock --systohc $utc_cmd $(get_noadjfile) $clock_args
+	if ! yesno $clock_adjfile; then
+		# Some implementations don't handle adjustments
+		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
+			utc_cmd="$utc_cmd --noadjfile"
+		fi
+	fi
+
+	_hwclock --systohc $utc_cmd $clock_args
 	retval=$?
 
 	eend $retval "Failed to sync clocks"
@@ -147,5 +144,5 @@ save()
 show()
 {
 	setupopts
-	hwclock --show "$utc_cmd" $(get_noadjfile) $clock_args
+	hwclock --show "$utc_cmd" $clock_args
 }

init.d/keymaps.in

@@ -15,7 +15,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 start()

init.d/killprocs.in

@@ -20,8 +20,10 @@ start()
 {
 	ebegin "Terminating remaining processes"
 	killall5 -15 ${killall5_opts}
+	sleep 1
 	eend 0
 	ebegin "Killing remaining processes"
 	killall5 -9 ${killall5_opts}
+	sleep 1
 	eend 0
 }

init.d/localmount.in

@@ -16,13 +16,13 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
+	keyword -jail -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local critical= types="noproc" x= no_netdev= rc=
+	local types="noproc" x= no_netdev= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
 		types="${types},no${x}"
 	done
@@ -37,17 +37,8 @@ start()
 	mount -at "$types" $no_netdev
 	eend $? "Some local filesystem failed to mount"
 	rc=$?
-	if [ -z "$critical_mounts" ]; then
+	if [ "$RC_UNAME" != Linux ]; then
 		rc=0
-	else
-		for x in ${critical_mounts}; do
-		fstabinfo -q $x || continue
-		if ! mountinfo -q $x; then
-			critical=x
-			eerror "Failed to mount $x"
-		fi
-		done
-		[ -z "$critical" ] && rc=0
 	fi
 	return $rc
 }

init.d/modules-load.in

@@ -1,72 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2016 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Loads a list of modules from systemd-compatible locations."
-
-depend()
-{
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
-}
-
-find_modfiles()
-{
-	local dirs="/usr/lib/modules-load.d /run/modules-load.d /etc/modules-load.d"
-	local basenames files fn x y
-	for x in $dirs; do
-		[ ! -d $x ] && continue
-		for y in $x/*.conf; do
-			[ -f $y ] && basenames="${basenames}\n${y##*/}"
-		done
-	done
-	basenames=$(printf "$basenames" | sort -u)
-	for x in $basenames; do
-		for y in $dirs; do
-			[ -r $y/$x ] &&
-				fn=$y/$x
-		done
-		files="$files $fn"
-	done
-	echo $files
-}
-
-load_modules()
-{
-	local file m modules rc x
-	file=$1
-	[ -z "$file" ] && return 0
-	while read m x; do
-		case $m in
-			\;*) continue ;;
-			\#*) continue ;;
-			*) modules="$modules $m"
-			;;
-		esac
-	done < $file
-	for x in $modules; do
-		ebegin "Loading module $x"
-		case "$RC_UNAME" in
-			FreeBSD) kldload "$x"; rc=$? ;;
-			Linux) modprobe -q "$x"; rc=$? ;;
-			*) ;;
-		esac
-		eend $rc "Failed to load $x"
-	done
-}
-
-start()
-{
-	local x
-	files=$(find_modfiles)
-	for x in $files; do
-		load_modules $x
-	done
-	return 0
-}

init.d/modules.in

@@ -14,8 +14,7 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	want modules-load
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/mount-ro.in

@@ -14,7 +14,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 depend()
 {
 	need killprocs savecache
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/net-online.in

@@ -15,7 +15,7 @@ depend()
 {
 	after modules
 	need sysfs
-	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
+	keyword -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
 }
 
 get_interfaces()

init.d/netmount.in

@@ -24,7 +24,7 @@ depend()
 	want $mywant	
 	use afc-client amd openvpn
 	use dns
-	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
+	keyword -jail -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()
@@ -37,22 +37,13 @@ start()
 	ebegin "Mounting network filesystems"
 	mount -at $fs
 	rc=$?
-	if [ "$RC_UNAME" = Linux ] && [ $rc = 0 ]; then
+	if [ "$RC_UNAME" = Linux ]; then
 		mount -a -O _netdev
 		rc=$?
 	fi
 	ewend $rc "Could not mount all network filesystems"
-	if [ -z "$critical_mounts" ]; then
+	if [ "$RC_UNAME" != Linux ]; then
 		rc=0
-	else
-		for x in ${critical_mounts}; do
-		fstabinfo -q $x || continue
-		if ! mountinfo -q $x; then
-			critical=x
-			eerror "Failed to mount $x"
-		fi
-		done
-		[ -z "$critical" ] && rc=0
 	fi
 	return $rc
 }
@@ -81,7 +72,7 @@ stop()
 	retval=$?
 
 	eoutdent
-	if [ "$RC_UNAME" = Linux ] && [ $retval = 0 ]; then
+	if [ "$RC_UNAME" = Linux ]; then
 		umount -a -O _netdev
 		retval=$?
 	fi

init.d/numlock.in

@@ -16,7 +16,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 _setleds()

init.d/procfs.in

@@ -15,7 +15,7 @@ depend()
 {
 	use modules devfs
 	need localmount
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/root.in

@@ -14,7 +14,7 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/savecache.in

@@ -49,7 +49,7 @@ start()
 	fi
 	ebegin "Saving dependency cache"
 	local rc=0 save=
-	for x in deptree depconfig shutdowntime softlevel rc.log; do
+	for x in deptree depconfig shutdowntime softlevel nettree rc.log; do
 		[ -e "$RC_SVCDIR/$x" ] && save="$save $RC_SVCDIR/$x"
 	done
 	if [ -n "$save" ]; then

init.d/swap.in

@@ -12,7 +12,7 @@
 depend()
 {
 	before localmount
-	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/swapfiles.in

@@ -12,7 +12,7 @@
 depend()
 {
 	need localmount
-	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/swclock.in

@@ -15,7 +15,7 @@ depend()
 {
 	before *
 	provide clock
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 # swclock is an OpenRC built in

init.d/sysfs.in

@@ -15,7 +15,7 @@ sysfs_opts=nodev,noexec,nosuid
 
 depend()
 {
-	keyword -docker -lxc -prefix -systemd-nspawn -vserver
+	keyword -lxc -prefix -systemd-nspawn -vserver
 }
 
 mount_sys()
@@ -88,15 +88,6 @@ mount_misc()
 		fi
 	fi
 
-	# Setup Kernel Support for persistent storage
-	if [ -d /sys/fs/pstore ] && ! mountinfo -q /sys/fs/pstore; then
-		if grep -qs 'pstore$' /proc/filesystems; then
-			ebegin "Mounting persistent storage (pstore) filesystem"
-			mount -t pstore pstore -o ${sysfs_opts} /sys/fs/pstore
-			eend $?
-		fi
-	fi
-
 	# setup up kernel support for efivarfs
 	# slightly complicated, as if it's build as a module but NOT yet loaded,
 	# it will NOT appear in /proc/filesystems yet

init.d/termencoding.in

@@ -16,7 +16,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 	use root
 	after bootmisc
 }

init.d/urandom.in

@@ -15,7 +15,7 @@ description="Initializes the random number generator."
 depend()
 {
 	need localmount
-	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn
+	keyword -jail -lxc -openvz -prefix -systemd-nspawn
 }
 
 save_seed()

man/Makefile

@@ -6,7 +6,7 @@ MAN3=		einfo.3 \
 		rc_config.3 rc_deptree.3 rc_find_pids.3 rc_plugin_hook.3 \
 		rc_runlevel.3 rc_service.3 rc_stringlist.3
 MAN8=		rc-service.8 rc-status.8 rc-update.8 openrc.8 openrc-run.8 \
-		service.8 start-stop-daemon.8 supervise-daemon.8
+		service.8 start-stop-daemon.8
 
 ifeq (${OS},Linux)
 MAN8 += rc-sstat.8

man/openrc-run.8

@@ -95,17 +95,10 @@ String describing the service.
 .It Ar description_$command
 String describing the extra command.
 .It Ar supervisor
-Supervisor to use to monitor this daemon. If this is unset or invalid,
+Supervisor to use to monitor this daemon. If this is unset,
-start-stop-daemon will be used.
+start-stop-daemon will be used. The only alternate supervisor we support
-Currently, we support s6 from scarnet software, and supervise-daemon
+in this release is S6 from Skarnet software. To use this, set
-which is a light-weight supervisor internal to OpenRC.
-To use s6, set
 supervisor=s6.
-or set
-supervisor=supervise-daemon
-to use supervise-daemon.
-Note that supervise-daemon is still in early development, so it is
-considered experimental.
 .It Ar s6_service_path
 The path to the s6 service directory if you are monitoring this service
 with S6. The default is /var/svc.d/${RC_SVCNAME}.
@@ -119,16 +112,10 @@ List of arguments passed to start-stop-daemon when starting the daemon.
 .It Ar command
 Daemon to start or stop via
 .Nm start-stop-daemon
-or
-.Nm supervise-daemon
 if no start or stop function is defined by the service.
 .It Ar command_args
 List of arguments to pass to the daemon when starting via
 .Nm start-stop-daemon .
-.It Ar command_args_foreground
-List of arguments to pass to the daemon when starting via
-.Nm supervise-daemon .
-to force the daemon to stay in the foreground
 .It Ar command_background
 Set this to "true", "yes" or "1" (case-insensitive) to force the daemon into
 the background. This implies the "--make-pidfile" and "--pidfile" option of
@@ -136,8 +123,6 @@ the background. This implies the "--make-pidfile" and "--pidfile" option of
 so the pidfile variable must be set.
 .It Ar chroot
 .Xr start-stop-daemon 8
-and
-.Xr supervise-daemon 8
 will chroot into this path before writing the pid file or starting the daemon.
 .It Ar pidfile
 Pidfile to use for the above defined command.
@@ -187,9 +172,9 @@ The service will start after these services and stop before these services.
 The service will start before these services and stop after these services.
 .It Ic provide
 The service provides this virtual service. For example, named provides dns.
-Note that it is not legal to have a virtual and real service with the
+Virtual services take precedence over real services, so it is highly
-same name. If you do this, you will receive an error message, and you
+recommended that you do not have a real service that has the same name
-must rename either the real or virtual service.
+as a virtual service.
 .It Ic config
 We should recalculate our dependencies if the listed files have changed.
 .It Ic keyword

man/rc-service.8

@@ -20,14 +20,6 @@
 .Ar service cmd
 .Op Ar ...
 .Nm
-.Op Fl I , -ifinactive
-.Ar service cmd
-.Op Ar ...
-.Nm
-.Op Fl N , -ifnotstarted
-.Ar service cmd
-.Op Ar ...
-.Nm
 .Fl e , -exists
 .Ar service
 .Nm
@@ -44,13 +36,6 @@ If
 is given then
 .Nm
 returns 0 even if the service does not exist.
-If
-.Fl I , -ifinactive
-or
-.Fl N , -ifnotstarted
-is given then
-.Nm
-returns 0 if the service exists but is in the wrong state.
 .Pp
 If given the
 .Fl l , -list

man/supervise-daemon.8

@@ -1,142 +0,0 @@
-.\" Copyright (c) 2007-2015 The OpenRC Authors.
-.\" See the Authors file at the top-level directory of this distribution and
-.\" https://github.com/OpenRC/openrc/blob/master/AUTHORS
-.\"
-.\" This file is part of OpenRC. It is subject to the license terms in
-.\" the LICENSE file found in the top-level directory of this
-.\" distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-.\" This file may not be copied, modified, propagated, or distributed
-.\"    except according to the terms contained in the LICENSE file.
-.\"
-.Dd April 27, 2016
-.Dt supervise-DAEMON 8 SMM
-.Os OpenRC
-.Sh NAME
-.Nm supervise-daemon
-.Nd starts a daemon and restarts it if it crashes
-.Sh SYNOPSIS
-.Nm
-.Fl d , -chdir
-.Ar path
-.Fl e , -env
-.Ar var=value
-.Fl g , -group
-.Ar group
-.Fl I , -ionice
-.Ar arg
-.Fl k , -umask
-.Ar value
-.Fl N , -nicelevel
-.Ar level
-.Fl p , -pidfile
-.Ar pidfile
-.Fl u , -user
-.Ar user
-.Fl r , -chroot
-.Ar chrootpath
-.Fl 1 , -stdout
-.Ar logfile
-.Fl 2 , -stderr
-.Ar logfile
-.Fl S , -start
-.Ar daemon
-.Op Fl -
-.Op Ar arguments
-.Nm
-.Fl K , -stop
-.Ar daemon
-.Fl p , -pidfile
-.Ar pidfile
-.Fl r , -chroot
-.Ar chrootpath
-.Sh DESCRIPTION
-.Nm
-provides a consistent method of starting, stopping and restarting
-daemons. If
-.Fl K , -stop
-is not provided, then we assume we are starting the daemon.
-.Nm
-only works with daemons which do not fork. Also, it uses its own pid
-file, so the daemon should not write a pid file, or the pid file passed
-to 
-.Nm
-should not be the one the daemon writes.
-.Pp
-Here are the options to specify the daemon and how it should start or stop:
-.Bl -tag -width indent
-.It Fl p , -pidfile Ar pidfile
-When starting, we write a
-.Ar pidfile
-so we know which supervisor to stop.  When stopping we only stop the pid(s)
-listed in the
-.Ar pidfile .
-.It Fl u , -user Ar user Ns Op : Ns Ar group
-Start the daemon as the
-.Ar user
-and update $HOME accordingly or stop daemons
-owned by the user. You can optionally append a
-.Ar group
-name here also.
-.It Fl v , -verbose
-Print the action(s) that are taken just before doing them.
-.Pp
-The options are as follows:
-.Bl -tag -width indent
-.It Fl d , -chdir Ar path
-chdir to this directory before starting the daemon.
-.It Fl e , -env Ar VAR=VALUE
-Set the environment variable VAR to VALUE.
-.It Fl g , -group Ar group
-Start the daemon as in the group.
-.It Fl I , -ionice Ar class Ns Op : Ns Ar data
-Modifies the IO scheduling priority of the daemon.
-Class can be 0 for none, 1 for real time, 2 for best effort and 3 for idle.
-Data can be from 0 to 7 inclusive.
-.It Fl k , -umask Ar mode
-Set the umask of the daemon.
-.It Fl N , -nicelevel Ar level
-Modifies the scheduling priority of the daemon.
-.It Fl r , -chroot Ar path
-chroot to this directory before starting the daemon. All other paths, such
-as the path to the daemon, chdir and pidfile, should be relative to the chroot.
-.It Fl u , -user Ar user
-Start the daemon as the specified user.
-.It Fl 1 , -stdout Ar logfile
-Redirect the standard output of the process to logfile.
-Must be an absolute pathname, but relative to the path optionally given with
-.Fl r , -chroot .
-The logfile can also be a named pipe.
-.It Fl 2 , -stderr Ar logfile
-The same thing as
-.Fl 1 , -stdout
-but with the standard error output.
-.El
-.Sh ENVIRONMENT
-.Va SSD_NICELEVEL
-can also set the scheduling priority of the daemon, but the command line
-option takes precedence.
-.Sh NOTE
-.Nm
-uses
-.Xr getopt 3
-to parse its options, which allows it to accept the `--' option which will
-cause it to stop processing options at that point. Any subsequent arguments
-are passed as arguments to the daemon to start and used when finding a daemon
-to stop or signal.
-.Sh SEE ALSO
-.Xr chdir 2 ,
-.Xr chroot 2 ,
-.Xr getopt 3 ,
-.Xr nice 2 ,
-.Xr rc_find_pids 3
-.Sh BUGS
-.Nm
-cannot stop an interpreted daemon that no longer exists without a pidfile.
-.Sh HISTORY
-.Nm
-first appeared in Debian.
-.Pp
-This is a complete re-implementation with the process finding code in the
-OpenRC library (librc, -lrc) so other programs can make use of it.
-.Sh AUTHORS
-.An William Hubbs <w.d.hubbs@gmail.com>

mk/os-prefix.mk

@@ -3,6 +3,4 @@
 
 ifeq (${MKPREFIX},yes)
 CPPFLAGS+=	-DPREFIX
-PKG_PREFIX?=	$(PREFIX)/usr
-SED_EXTRA=	-e '/_PATH=.*usr.bin/d'
 endif

mk/os.mk

@@ -13,7 +13,7 @@
 _OS_SH=		uname -s | tr '/' '-'
 _OS:= 		$(shell ${_OS_SH})
 OS?= 		${_OS}
-include ${MK}/os-prefix.mk
 include ${MK}/os-${OS}.mk
+include ${MK}/os-prefix.mk
 
 RC_LIB=		/$(LIBNAME)/rc

mk/sys.mk

@@ -11,7 +11,6 @@
 
 AR?=			ar
 CP?=			cp
-PKG_CONFIG?=	pkg-config
 ECHO?=			echo
 INSTALL?=		install
 RANLIB?=		ranlib
@@ -27,7 +26,7 @@ ifeq (${MKPREFIX},yes)
 UPREFIX= ${PREFIX}/usr
 endif
 endif
-LOCAL_PREFIX=		$(UPREFIX)/local
+LOCAL_PREFIX=		/usr/local
 
 PICFLAG?=		-fPIC
 

mk/termcap.mk

@@ -1,6 +1,6 @@
 ifeq (${MKTERMCAP},ncurses)
-TERMCAP_CFLAGS:=	$(shell ${PKG_CONFIG} ncurses --cflags 2> /dev/null)
+TERMCAP_CFLAGS:=	$(shell pkg-config ncurses --cflags 2> /dev/null)
-LTERMCAP:=			$(shell ${PKG_CONFIG} ncurses --libs 2> /dev/null)
+LTERMCAP:=			$(shell pkg-config ncurses --libs 2> /dev/null)
 ifeq ($(LTERMCAP),)
 LIBTERMCAP?=	-lncurses
 else

runlevels/Makefile

@@ -3,7 +3,6 @@ include ../mk/net.mk
 BOOT=		bootmisc fsck hostname localmount loopback \
 		root swap swapfiles sysctl urandom ${BOOT-${OS}}
 DEFAULT=	local netmount
-NONETWORK=	local
 SHUTDOWN=	savecache ${SHUTDOWN-${OS}}
 SYSINIT=	${SYSINIT-${OS}}
 
@@ -11,7 +10,6 @@ LEVELDIR=	${DESTDIR}/${SYSCONFDIR}/runlevels
 SYSINITDIR=	${LEVELDIR}/sysinit
 BOOTDIR=	${LEVELDIR}/boot
 DEFAULTDIR=	${LEVELDIR}/default
-NONETWORKDIR=	${LEVELDIR}/nonetwork
 SHUTDOWNDIR=	${LEVELDIR}/shutdown
 
 ifeq (${MKNET},yes)
@@ -74,14 +72,6 @@ install:
 			fi; \
 			ln -snf ${INITDIR}/"$$x" ${DEFAULTDIR}/"$$x" || exit $$?; done \
 	fi
-	if ! test -d "${NONETWORKDIR}"; then \
-		${INSTALL} -d ${NONETWORKDIR} || exit $$?; \
-		for x in ${NONETWORK}; do \
-			if test "${MKPREFIX}" = yes; then \
-				grep -q "keyword .*-prefix" ${INITFILES}/"$$x" && continue; \
-			fi; \
-			ln -snf ${INITDIR}/"$$x" ${NONETWORKDIR}/"$$x" || exit $$?; done \
-	fi
 	if ! test -d "${SHUTDOWNDIR}"; then \
 		${INSTALL} -d ${SHUTDOWNDIR} || exit $$?; \
 		for x in ${SHUTDOWN}; do \

sh/Makefile

@@ -1,8 +1,7 @@
 DIR=	${LIBEXECDIR}/sh
 SRCS=	init.sh.in functions.sh.in gendepends.sh.in \
 	openrc-run.sh.in rc-functions.sh.in tmpfiles.sh.in ${SRCS-${OS}}
-INC=	functions.sh rc-mount.sh rc-functions.sh s6.sh start-stop-daemon.sh \
+INC=	rc-mount.sh functions.sh rc-functions.sh s6.sh start-stop-daemon.sh
-		supervise-daemon.sh
 BIN=	gendepends.sh init.sh openrc-run.sh tmpfiles.sh ${BIN-${OS}}
 
 INSTALLAFTER=	_installafter

sh/binfmt.sh.in

@@ -22,7 +22,7 @@ apply_file() {
 
 	### FILE FORMAT ###
 	# See https://www.kernel.org/doc/Documentation/binfmt_misc.txt
-	while read -r line; do
+	while read line; do
 		LINENUM=$(( LINENUM+1 ))
 		case $line in
 			\#*) continue ;;

sh/openrc-run.sh.in

@@ -154,7 +154,6 @@ start()
 	local func=ssd_start
 	case "$supervisor" in
 		s6) func=s6_start ;;
-		supervise-daemon) func=supervise_start ;;
 		?*)
 			ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
 			;;
@@ -167,7 +166,6 @@ stop()
 	local func=ssd_stop
 	case "$supervisor" in
 		s6) func=s6_stop ;;
-		supervise-daemon) func=supervise_stop ;;
 		?*)
 			ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
 			;;
@@ -180,7 +178,6 @@ status()
 	local func=ssd_status
 	case "$supervisor" in
 		s6) func=s6_status ;;
-		supervise-daemon) func=supervise_status ;;
 		?*)
 			ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
 			;;
@@ -218,7 +215,6 @@ fi
 # load service supervisor functions
 sourcex "@LIBEXECDIR@/sh/s6.sh"
 sourcex "@LIBEXECDIR@/sh/start-stop-daemon.sh"
-sourcex "@LIBEXECDIR@/sh/supervise-daemon.sh"
 
 # Set verbose mode
 if yesno "${rc_verbose:-$RC_VERBOSE}"; then

sh/s6.sh

@@ -41,7 +41,7 @@ s6_stop()
  fi
 	s6_service_link="${RC_SVCDIR}/s6-scan/${s6_service_path##*/}"
 	ebegin "Stopping ${name:-$RC_SVCNAME}"
-	s6-svc -wD -d -T ${s6_service_timeout_stop:-10000} "${s6_service_link}"
+	s6-svc -Dd -T ${s6_service_timeout_stop:-10000} "${s6_service_link}"
 	set -- $(s6-svstat "${s6_service_link}")
 	[ "$1" = "down" ]
 	eend $? "Failed to stop $RC_SVCNAME"

sh/start-stop-daemon.sh

@@ -40,7 +40,6 @@ ssd_start()
 	fi
 	eval start-stop-daemon --start \
 		--exec $command \
-		${chroot:+--chroot} $chroot \
 		${procname:+--name} $procname \
 		${pidfile:+--pidfile} $pidfile \
 		${command_user+--user} $command_user \
@@ -48,7 +47,6 @@ ssd_start()
 		-- $command_args $command_args_background
 	if eend $? "Failed to start $RC_SVCNAME"; then
 		service_set_value "command" "${command}"
-		[ -n "${chroot}" ] && service_set_value "chroot" "${chroot}"
 		[ -n "${pidfile}" ] && service_set_value "pidfile" "${pidfile}"
 		[ -n "${procname}" ] && service_set_value "procname" "${procname}"
 		return 0
@@ -64,11 +62,9 @@ ssd_start()
 ssd_stop()
 {
 	local startcommand="$(service_get_value "command")"
-	local startchroot="$(service_get_value "chroot")"
 	local startpidfile="$(service_get_value "pidfile")"
 	local startprocname="$(service_get_value "procname")"
 	command="${startcommand:-$command}"
-	chroot="${startchroot:-$chroot}"
 	pidfile="${startpidfile:-$pidfile}"
 	procname="${startprocname:-$procname}"
 	[ -n "$command" -o -n "$procname" -o -n "$pidfile" ] || return 0
@@ -77,7 +73,7 @@ ssd_stop()
 		${retry:+--retry} $retry \
 		${command:+--exec} $command \
 		${procname:+--name} $procname \
-		${pidfile:+--pidfile} $chroot$pidfile \
+		${pidfile:+--pidfile} $pidfile \
 		${stopsig:+--signal} $stopsig
 
 	eend $? "Failed to stop $RC_SVCNAME"

sh/supervise-daemon.sh

@@ -1,55 +0,0 @@
-# start / stop / status functions for supervise-daemon
-
-# Copyright (c) 2016 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
-
-supervise_start()
-{
-	if [ -z "$command" ]; then
-		ewarn "The command variable is undefined."
-		ewarn "There is nothing for ${name:-$RC_SVCNAME} to start."
-		return 1
-	fi
-
-	ebegin "Starting ${name:-$RC_SVCNAME}"
-	eval supervise-daemon --start \
-		${chroot:+--chroot} $chroot \
-		${pidfile:+--pidfile} $pidfile \
-		${command_user+--user} $command_user \
-		$supervise_daemon_args \
-		$command \
-		-- $command_args $command_args_foreground
-	rc=$?
-	if [ $rc = 0 ]; then
-		[ -n "${chroot}" ] && service_set_value "chroot" "${chroot}"
-		[ -n "${pidfile}" ] && service_set_value "pidfile" "${pidfile}"
-	fi
-	eend $rc "failed to start $RC_SVCNAME"
-}
-
-supervise_stop()
-{
-	local startchroot="$(service_get_value "chroot")"
-	local startpidfile="$(service_get_value "pidfile")"
-	chroot="${startchroot:-$chroot}"
-	pidfile="${startpidfile:-$pidfile}"
-	[ -n "$pidfile" ] || return 0
-	ebegin "Stopping ${name:-$RC_SVCNAME}"
-	supervise-daemon --stop \
-		${pidfile:+--pidfile} $chroot$pidfile \
-		${stopsig:+--signal} $stopsig
-
-	eend $? "Failed to stop $RC_SVCNAME"
-}
-
-supervise_status()
-{
-	_status
-}

src/includes/rc-misc.h

@@ -26,6 +26,7 @@
 #include <unistd.h>
 
 #include "helpers.h"
+#include "rc.h"
 
 #define RC_LEVEL_BOOT           "boot"
 #define RC_LEVEL_DEFAULT        "default"
@@ -60,6 +61,10 @@ int is_writable(const char *);
 #define service_stop(service)  exec_service(service, "stop");
 
 int parse_mode(mode_t *, char *);
+const char *detect_prefix(void);
+const char *get_systype(void);
+const char *detect_container(void);
+const char *detect_vm(void);
 
 /* Handy function so we can wrap einfo around our deptree */
 RC_DEPTREE *_rc_deptree_load (int, int *);

src/librc/librc-depend.c

@@ -717,16 +717,14 @@ rc_deptree_update_needed(time_t *newest, char *file)
 }
 librc_hidden_def(rc_deptree_update_needed)
 
-/* This is a 7 phase operation
+/* This is a 6 phase operation
    Phase 1 is a shell script which loads each init script and config in turn
    and echos their dependency info to stdout
    Phase 2 takes that and populates a depinfo object with that data
    Phase 3 adds any provided services to the depinfo object
    Phase 4 scans that depinfo object and puts in backlinks
    Phase 5 removes broken before dependencies
-   Phase 6 looks for duplicate services indicating a real and virtual service
+   Phase 6 saves the depinfo object to disk
-   with the same names
-   Phase 7 saves the depinfo object to disk
    */
 bool
 rc_deptree_update(void)
@@ -735,16 +733,15 @@ rc_deptree_update(void)
 	RC_DEPTREE *deptree, *providers;
 	RC_DEPINFO *depinfo = NULL, *depinfo_np, *di;
 	RC_DEPTYPE *deptype = NULL, *dt_np, *dt, *provide;
-	RC_STRINGLIST *config, *dupes, *types, *sorted, *visited;
+	RC_STRINGLIST *config, *types, *sorted, *visited;
 	RC_STRING *s, *s2, *s2_np, *s3, *s4;
 	char *line = NULL;
 	size_t len = 0;
 	char *depend, *depends, *service, *type, *nosys, *onosys;
 	size_t i, k, l;
 	bool retval = true;
-	const char *sys = rc_sys();
+	const char *sys = NULL;
 	struct utsname uts;
-	int serrno;
 
 	/* Some init scripts need RC_LIBEXECDIR to source stuff
 	   Ideally we should be setting our full env instead */
@@ -850,6 +847,9 @@ rc_deptree_update(void)
 
 	/* Phase 2 - if we're a special system, remove services that don't
 	 * work for them. This doesn't stop them from being run directly. */
+	sys = detect_container();
+		if (!sys)
+			sys = detect_vm();
 	if (sys) {
 		len = strlen(sys);
 		nosys = xmalloc(len + 2);
@@ -999,22 +999,7 @@ rc_deptree_update(void)
 	}
 	rc_stringlist_free(types);
 
-	/* Phase 6 - Print errors for duplicate services */
+	/* Phase 6 - save to disk
-	dupes = rc_stringlist_new();
-	TAILQ_FOREACH(depinfo, deptree, entries) {
-		serrno = errno;
-		errno = 0;
-		rc_stringlist_addu(dupes,depinfo->service);
-		if (errno == EEXIST) {
-			fprintf(stderr,
-					"Error: %s is the name of a real and virtual service.\n",
-					depinfo->service);
-		}
-		errno = serrno;
-	}
-	rc_stringlist_free(dupes);
-
-	/* Phase 7 - save to disk
 	   Now that we're purely in C, do we need to keep a shell parseable file?
 	   I think yes as then it stays human readable
 	   This works and should be entirely shell parseable provided that depend

src/librc/librc.c

@@ -198,9 +198,13 @@ found:
 #endif
 
 
-static const char *
+const char *
-get_systype(void)
+rc_sys(void)
 {
+#ifdef PREFIX
+	return RC_SYS_PREFIX;
+#endif
+
 	char *systype = rc_conf_value("rc_sys");
 	if (systype) {
 		char *s = systype;
@@ -211,37 +215,10 @@ get_systype(void)
 			s++;
 		}
 	}
-	return systype;
-}
 
-static const char *
-detect_prefix(const char *systype)
-{
-#ifdef PREFIX
-	return RC_SYS_PREFIX;
-#else
-	if (systype) {
-		if (strcmp(systype, RC_SYS_NONE) == 0)
-			return NULL;
-		if (strcmp(systype, RC_SYS_PREFIX) == 0)
-			return RC_SYS_PREFIX;
-	}
-
-	return NULL;
-#endif
-}
-
-static const char *
-detect_container(const char *systype)
-{
 #ifdef __FreeBSD__
-	if (systype) {
+	if (systype && strcmp(systype, RC_SYS_JAIL) == 0)
-		if (strcmp(systype, RC_SYS_NONE) == 0)
-		       return NULL;
-		if (strcmp(systype, RC_SYS_JAIL) == 0)
 		return RC_SYS_JAIL;
-	}
-
 	int jailed = 0;
 	size_t len = sizeof(jailed);
 
@@ -250,10 +227,25 @@ detect_container(const char *systype)
 			return RC_SYS_JAIL;
 #endif
 
+#ifdef __NetBSD__
+	if (systype) {
+		if(strcmp(systype, RC_SYS_XEN0) == 0)
+				return RC_SYS_XEN0;
+		if (strcmp(systype, RC_SYS_XENU) == 0)
+			return RC_SYS_XENU;
+	}
+	if (exists("/kern/xen/privcmd"))
+		return RC_SYS_XEN0;
+	if (exists("/kern/xen"))
+		return RC_SYS_XENU;
+#endif
+
 #ifdef __linux__
 	if (systype) {
-		if (strcmp(systype, RC_SYS_NONE) == 0)
+		if (strcmp(systype, RC_SYS_XEN0) == 0)
-			return NULL;
+			return RC_SYS_XEN0;
+		if (strcmp(systype, RC_SYS_XENU) == 0)
+			return RC_SYS_XENU;
 		if (strcmp(systype, RC_SYS_UML) == 0)
 			return RC_SYS_UML;
 		if (strcmp(systype, RC_SYS_VSERVER) == 0)
@@ -269,7 +261,11 @@ detect_container(const char *systype)
 		if (strcmp(systype, RC_SYS_DOCKER) == 0)
 				return RC_SYS_DOCKER;
 	}
-	if (file_regex("/proc/cpuinfo", "UML"))
+	if (exists("/proc/xen")) {
+		if (file_regex("/proc/xen/capabilities", "control_d"))
+			return RC_SYS_XEN0;
+		return RC_SYS_XENU;
+	} else if (file_regex("/proc/cpuinfo", "UML"))
 		return RC_SYS_UML;
 	else if (file_regex("/proc/self/status",
 		"(s_context|VxID):[[:space:]]*[1-9]"))
@@ -285,70 +281,12 @@ detect_container(const char *systype)
 		return RC_SYS_RKT;
 	else if (file_regex("/proc/1/environ", "container=systemd-nspawn"))
 		return RC_SYS_SYSTEMD_NSPAWN;
-	else if (exists("/.dockerenv"))
-		return RC_SYS_DOCKER;
-	/* old test, I'm not sure when this was valid. */
 	else if (file_regex("/proc/1/environ", "container=docker"))
 		return RC_SYS_DOCKER;
 #endif
 
 	return NULL;
 }
-
-static const char *
-detect_vm(const char *systype)
-{
-#ifdef __NetBSD__
-	if (systype) {
-		if (strcmp(systype, RC_SYS_NONE) == 0)
-			return NULL;
-		if (strcmp(systype, RC_SYS_XEN0) == 0)
-			return RC_SYS_XEN0;
-		if (strcmp(systype, RC_SYS_XENU) == 0)
-			return RC_SYS_XENU;
-	}
-	if (exists("/kern/xen/privcmd"))
-		return RC_SYS_XEN0;
-	if (exists("/kern/xen"))
-		return RC_SYS_XENU;
-#endif
-
-#ifdef __linux__
-	if (systype) {
-		if (strcmp(systype, RC_SYS_NONE) == 0)
-			return NULL;
-		if (strcmp(systype, RC_SYS_XEN0) == 0)
-			return RC_SYS_XEN0;
-		if (strcmp(systype, RC_SYS_XENU) == 0)
-			return RC_SYS_XENU;
-	}
-	if (exists("/proc/xen")) {
-		if (file_regex("/proc/xen/capabilities", "control_d"))
-			return RC_SYS_XEN0;
-		return RC_SYS_XENU;
-	}
-#endif
-
-	return NULL;
-}
-
-const char *
-rc_sys(void)
-{
-	const char *systype;
-	const char *sys;
-
-	systype = get_systype();
-	sys = detect_prefix(systype);
-	if (!sys) {
-		sys = detect_container(systype);
-		if (!sys) {
-			sys = detect_vm(systype);
-		}
-	}
-
-	return sys;
-}
 librc_hidden_def(rc_sys)
 
 static const char *

src/librc/rc.h.in

@@ -318,7 +318,6 @@ bool rc_service_daemons_crashed(const char *);
  * Some services cannot work in these systems, or we do something else. */
 #define RC_SYS_DOCKER  "DOCKER"
 #define RC_SYS_JAIL    "JAIL"
-#define RC_SYS_NONE    ""
 #define RC_SYS_OPENVZ  "OPENVZ"
 #define RC_SYS_LXC     "LXC"
 #define RC_SYS_PREFIX  "PREFIX"

src/rc/.gitignore

@@ -5,7 +5,6 @@ rc-update
 runscript
 service
 start-stop-daemon
-supervise-daemon
 einfon
 einfo
 ewarnn

src/rc/Makefile

@@ -1,9 +1,4 @@
-SRCS=	checkpath.c do_e.c do_mark_service.c do_service.c \
+SRCS=	rc.c 	rc-logger.c rc-misc.c rc-plugin.c
-		do_value.c fstabinfo.c is_newer_than.c is_older_than.c \
-		mountinfo.c openrc-run.c rc-abort.c rc.c \
-		rc-depend.c rc-logger.c rc-misc.c rc-plugin.c \
-		rc-service.c rc-status.c rc-update.c \
-		shell_var.c start-stop-daemon.c supervise-daemon.c swclock.c _usage.c
 
 ifeq (${MKSELINUX},yes)
 SRCS+=		rc-selinux.c
@@ -16,8 +11,7 @@ SBINDIR=	${PREFIX}/sbin
 LINKDIR=	${LIBEXECDIR}
 
 BINPROGS=	rc-status
-SBINPROGS = openrc openrc-run rc rc-service rc-update runscript service \
+SBINPROGS = openrc openrc-run rc rc-service rc-update runscript service start-stop-daemon
-			start-stop-daemon supervise-daemon
 RC_BINPROGS=	einfon einfo ewarnn ewarn eerrorn eerror ebegin eend ewend \
 				eindent eoutdent esyslog eval_ecolors ewaitfile \
 				veinfo vewarn vebegin veend vewend veindent veoutdent \
@@ -75,7 +69,6 @@ install: all
 	if test "${MKPAM}" = pam; then \
 		${INSTALL} -d ${DESTDIR}${PAMDIR}; \
 		${INSTALL} -m ${PAMMODE} start-stop-daemon.pam ${DESTDIR}${PAMDIR}/start-stop-daemon; \
-		${INSTALL} -m ${PAMMODE} supervise-daemon.pam ${DESTDIR}${PAMDIR}/supervise-daemon; \
 	fi
 
 check test::
@@ -112,12 +105,12 @@ mountinfo: mountinfo.o _usage.o rc-misc.o
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
 openrc rc: rc.o rc-logger.o rc-misc.o rc-plugin.o _usage.o
+ifeq (${MKSELINUX},yes)
+openrc rc: rc-selinux.o
+endif
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
 openrc-run runscript: openrc-run.o _usage.o rc-misc.o rc-plugin.o
-ifeq (${MKSELINUX},yes)
-openrc-run runscript: rc-selinux.o
-endif
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
 rc-abort: rc-abort.o
@@ -138,9 +131,6 @@ rc-update: rc-update.o _usage.o rc-misc.o
 start-stop-daemon: start-stop-daemon.o _usage.o rc-misc.o
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
-supervise-daemon: supervise-daemon.o _usage.o rc-misc.o
-	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
-
 service_get_value service_set_value get_options save_options: do_value.o rc-misc.o
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 

src/rc/_usage.c

@@ -13,7 +13,6 @@
 #include <ctype.h>
 #include <stdio.h>
 #include <stdlib.h>
-#include "rc.h"
 #include "rc-misc.h"
 #include "_usage.h"
 #include "version.h"
@@ -47,7 +46,10 @@ _noreturn void show_version(void)
 	const char *systype = NULL;
 
 	printf("%s (OpenRC", applet);
-	if ((systype = rc_sys()))
+	systype = detect_container();
+	if (!systype)
+		systype = detect_vm();
+	if (systype)
 		printf(" [%s]", systype);
 	printf(") %s", VERSION);
 #ifdef BRANDING

src/rc/checkpath.c

@@ -30,7 +30,6 @@
 #include <unistd.h>
 
 #include "einfo.h"
-#include "rc.h"
 #include "rc-misc.h"
 #include "rc-selinux.h"
 #include "_usage.h"

src/rc/do_value.c

@@ -28,7 +28,6 @@
 #include <unistd.h>
 
 #include "einfo.h"
-#include "rc.h"
 #include "rc-misc.h"
 
 const char *applet = NULL;

src/rc/fstabinfo.c

@@ -178,9 +178,6 @@ int main(int argc, char **argv)
 	FILE *fp;
 #endif
 
-	/* fail if there is no /etc/fstab */
-	if (!exists("/etc/fstab"))
-		eerrorx("/etc/fstab does not exist");
 	/* Ensure that we are only quiet when explicitly told to be */
 	unsetenv("EINFO_QUIET");
 

src/rc/is_newer_than.c

@@ -15,7 +15,6 @@
 #include <stdio.h>
 #include <stdlib.h>
 
-#include "rc.h"
 #include "rc-misc.h"
 
 int main(int argc, char **argv)

src/rc/is_older_than.c

@@ -15,7 +15,6 @@
 #include <stdio.h>
 #include <stdlib.h>
 
-#include "rc.h"
 #include "rc-misc.h"
 
 int main(int argc, char **argv)

src/rc/mountinfo.c

@@ -297,9 +297,6 @@ getmntfile(const char *file)
 	struct mntent *ent = NULL;
 	FILE *fp;
 
-	if (!exists("/etc/fstab"))
-		return NULL;
-
 	fp = setmntent("/etc/fstab", "r");
 	while ((ent = getmntent(fp)))
 		if (strcmp(file, ent->mnt_dir) == 0)

src/rc/openrc-run.c

@@ -390,14 +390,6 @@ svc_exec(const char *arg1, const char *arg2)
 		}
 
 		if (exists(RC_SVCDIR "/openrc-run.sh")) {
-			if (arg2)
-				einfov("Executing: %s %s %s %s %s",
-					RC_SVCDIR "/openrc-run.sh", RC_SVCDIR "/openrc-run.sh",
-					service, arg1, arg2);
-			else
-				einfov("Executing: %s %s %s %s",
-					RC_SVCDIR "/openrc-run.sh", RC_SVCDIR "/openrc-run.sh",
-					service, arg1);
 			execl(RC_SVCDIR "/openrc-run.sh",
 			    RC_SVCDIR "/openrc-run.sh",
 			    service, arg1, arg2, (char *) NULL);
@@ -405,16 +397,6 @@ svc_exec(const char *arg1, const char *arg2)
 			    service, strerror(errno));
 			_exit(EXIT_FAILURE);
 		} else {
-			if (arg2)
-				einfov("Executing: %s %s %s %s %s",
-					RC_LIBEXECDIR "/sh/openrc-run.sh",
-					RC_LIBEXECDIR "/sh/openrc-run.sh",
-			    	service, arg1, arg2);
-			else
-				einfov("Executing: %s %s %s %s",
-					RC_LIBEXECDIR "/sh/openrc-run.sh",
-					RC_LIBEXECDIR "/sh/openrc-run.sh",
-			    	service, arg1);
 			execl(RC_LIBEXECDIR "/sh/openrc-run.sh",
 			    RC_LIBEXECDIR "/sh/openrc-run.sh",
 			    service, arg1, arg2, (char *) NULL);
@@ -1106,7 +1088,6 @@ service_plugable(void)
 int main(int argc, char **argv)
 {
 	bool doneone = false;
-	bool runscript = false;
 	int retval, opt, depoptions = RC_DEP_TRACE;
 	RC_STRING *svc;
 	char path[PATH_MAX], lnk[PATH_MAX];
@@ -1122,10 +1103,6 @@ int main(int argc, char **argv)
 		exit(EXIT_FAILURE);
 	}
 
-	applet = basename_c(argv[0]);
-	if (strcmp(applet, "runscript") == 0)
-		runscript = true;
-
 	if (stat(argv[1], &stbuf) != 0) {
 		fprintf(stderr, "openrc-run `%s': %s\n",
 		    argv[1], strerror(errno));
@@ -1292,9 +1269,6 @@ int main(int argc, char **argv)
 	applet_list = rc_stringlist_new();
 	rc_stringlist_add(applet_list, applet);
 
-	if (runscript)
-		ewarn("%s uses runscript, please convert to openrc-run.", service);
-
 	/* Now run each option */
 	retval = EXIT_SUCCESS;
 	while (optind < argc) {

src/rc/rc-logger.c

@@ -247,10 +247,6 @@ rc_logger_open(const char *level)
 		logfile = rc_conf_value("rc_log_path");
 		if (logfile == NULL)
 			logfile = DEFAULTLOG;
-		if (!strcmp(logfile, TMPLOG)) {
-			eerror("Cowardly refusing to concatenate a logfile into itself.");
-			eerrorx("Please change rc_log_path to something other than %s to get rid of this message", TMPLOG);
-		}
 
 		if ((plog = fopen(logfile, "ae"))) {
 			if ((log = fopen(TMPLOG, "re"))) {

src/rc/rc-misc.c

@@ -27,6 +27,7 @@
 #include <ctype.h>
 #include <fcntl.h>
 #include <limits.h>
+#  include <regex.h>
 #include <signal.h>
 #include <stdio.h>
 #include <stdlib.h>
@@ -68,12 +69,6 @@ env_filter(void)
 
 	/* Add the user defined list of vars */
 	env_allow = rc_stringlist_split(rc_conf_value("rc_env_allow"), " ");
-	/*
-	 * If '*' is an entry in rc_env_allow, do nothing as we are to pass
-	 * through all environment variables.
-	 */
-	if (rc_stringlist_find(env_allow, "*"))
-		return;
 	profile = rc_config_load(RC_PROFILE_ENV);
 
 	/* Copy the env and work from this so we can manipulate it safely */
@@ -131,7 +126,7 @@ env_config(void)
 	char *np;
 	char *npp;
 	char *tok;
-	const char *sys = rc_sys();
+	const char *sys = NULL;
 	char buffer[PATH_MAX];
 
 	/* Ensure our PATH is prefixed with the system locations first
@@ -182,6 +177,10 @@ env_config(void)
 	} else
 		setenv("RC_DEFAULTLEVEL", RC_LEVEL_DEFAULT, 1);
 
+	sys = detect_container();
+	if (!sys)
+		sys = detect_vm();
+
 	if (sys)
 		setenv("RC_SYS", sys, 1);
 
@@ -339,6 +338,163 @@ is_writable(const char *path)
 	return 0;
 }
 
+static bool file_regex(const char *file, const char *regex)
+{
+	FILE *fp;
+	char *line = NULL;
+	size_t len = 0;
+	regex_t re;
+	bool retval = true;
+	int result;
+
+	if (!(fp = fopen(file, "r")))
+		return false;
+
+	if ((result = regcomp(&re, regex, REG_EXTENDED | REG_NOSUB)) != 0) {
+		fclose(fp);
+		line = xmalloc(sizeof(char) * BUFSIZ);
+		regerror(result, &re, line, BUFSIZ);
+		fprintf(stderr, "file_regex: %s", line);
+		free(line);
+		return false;
+	}
+
+	while ((rc_getline(&line, &len, fp))) {
+		char *str = line;
+		/* some /proc files have \0 separated content so we have to
+		   loop through the 'line' */
+		do {
+			if (regexec(&re, str, 0, NULL, 0) == 0)
+				goto found;
+			str += strlen(str) + 1;
+			/* len is the size of allocated buffer and we don't
+			   want call regexec BUFSIZE times. find next str */
+			while (str < line + len && *str == '\0')
+				str++;
+		} while (str < line + len);
+	}
+	retval = false;
+found:
+	fclose(fp);
+	free(line);
+	regfree(&re);
+
+	return retval;
+}
+
+const char *detect_prefix(void)
+{
+#ifdef PREFIX
+	return RC_SYS_PREFIX;
+#else
+	return NULL;
+#endif
+}
+
+const char *get_systype(void)
+{
+	char *systype = rc_conf_value("rc_sys");
+	if (systype) {
+		char *s = systype;
+		/* Convert to uppercase */
+		while (s && *s) {
+			if (islower((unsigned char) *s))
+				*s = toupper((unsigned char) *s);
+			s++;
+		}
+	}
+	return systype;
+}
+
+const char *detect_container(void)
+{
+	const char *systype = get_systype();
+
+#ifdef __FreeBSD__
+	if (systype && strcmp(systype, RC_SYS_JAIL) == 0)
+		return RC_SYS_JAIL;
+	int jailed = 0;
+	size_t len = sizeof(jailed);
+
+	if (sysctlbyname("security.jail.jailed", &jailed, &len, NULL, 0) == 0)
+		if (jailed == 1)
+			return RC_SYS_JAIL;
+#endif
+
+#ifdef __linux__
+	if (systype) {
+		if (strcmp(systype, RC_SYS_UML) == 0)
+			return RC_SYS_UML;
+		if (strcmp(systype, RC_SYS_VSERVER) == 0)
+			return RC_SYS_VSERVER;
+		if (strcmp(systype, RC_SYS_OPENVZ) == 0)
+			return RC_SYS_OPENVZ;
+		if (strcmp(systype, RC_SYS_LXC) == 0)
+			return RC_SYS_LXC;
+		if (strcmp(systype, RC_SYS_RKT) == 0)
+				return RC_SYS_RKT;
+		if (strcmp(systype, RC_SYS_SYSTEMD_NSPAWN) == 0)
+				return RC_SYS_SYSTEMD_NSPAWN;
+		if (strcmp(systype, RC_SYS_DOCKER) == 0)
+				return RC_SYS_DOCKER;
+	}
+	if (file_regex("/proc/cpuinfo", "UML"))
+		return RC_SYS_UML;
+	else if (file_regex("/proc/self/status",
+		"(s_context|VxID):[[:space:]]*[1-9]"))
+		return RC_SYS_VSERVER;
+	else if (exists("/proc/vz/veinfo") && !exists("/proc/vz/version"))
+		return RC_SYS_OPENVZ;
+	else if (file_regex("/proc/self/status",
+		"envID:[[:space:]]*[1-9]"))
+		return RC_SYS_OPENVZ; /* old test */
+	else if (file_regex("/proc/1/environ", "container=lxc"))
+		return RC_SYS_LXC;
+	else if (file_regex("/proc/1/environ", "container=rkt"))
+		return RC_SYS_RKT;
+	else if (file_regex("/proc/1/environ", "container=systemd-nspawn"))
+		return RC_SYS_SYSTEMD_NSPAWN;
+	else if (file_regex("/proc/1/environ", "container=docker"))
+		return RC_SYS_DOCKER;
+#endif
+
+	return NULL;
+}
+
+const char *detect_vm(void)
+{
+	const char *systype = get_systype();
+
+#ifdef __NetBSD__
+	if (systype) {
+		if(strcmp(systype, RC_SYS_XEN0) == 0)
+				return RC_SYS_XEN0;
+		if (strcmp(systype, RC_SYS_XENU) == 0)
+			return RC_SYS_XENU;
+	}
+	if (exists("/kern/xen/privcmd"))
+		return RC_SYS_XEN0;
+	if (exists("/kern/xen"))
+		return RC_SYS_XENU;
+#endif
+
+#ifdef __linux__
+	if (systype) {
+		if (strcmp(systype, RC_SYS_XEN0) == 0)
+			return RC_SYS_XEN0;
+		if (strcmp(systype, RC_SYS_XENU) == 0)
+			return RC_SYS_XENU;
+	}
+	if (exists("/proc/xen")) {
+		if (file_regex("/proc/xen/capabilities", "control_d"))
+			return RC_SYS_XEN0;
+		return RC_SYS_XENU;
+	}
+#endif
+
+	return NULL;
+}
+
 RC_DEPTREE * _rc_deptree_load(int force, int *regen)
 {
 	int fd;

src/rc/rc-selinux.c

@@ -370,7 +370,7 @@ void selinux_setup(char **argv)
 	 * which will open the pty with initrc_devpts_t, if it doesnt exist,
 	 * fall back to plain exec
 	 */
-	if (!access("/usr/sbin/open_init_pty", X_OK)) {
+	if (access("/usr/sbin/open_init_pty", X_OK)) {
 		if (execvp("/usr/sbin/open_init_pty", argv)) {
 			perror("execvp");
 			exit(-1);

src/rc/rc-service.c

@@ -29,12 +29,10 @@
 
 const char *applet = NULL;
 const char *extraopts = NULL;
-const char *getoptstring = "e:ilr:IN" getoptstring_COMMON;
+const char *getoptstring = "e:ilr:" getoptstring_COMMON;
 const struct option longopts[] = {
 	{ "exists",   1, NULL, 'e' },
 	{ "ifexists", 0, NULL, 'i' },
-	{ "ifinactive", 0, NULL, 'I' },
-	{ "ifnotstarted", 0, NULL, 'N' },
 	{ "list",     0, NULL, 'l' },
 	{ "resolve",  1, NULL, 'r' },
 	longopts_COMMON
@@ -42,8 +40,6 @@ const struct option longopts[] = {
 const char * const longopts_help[] = {
 	"tests if the service exists or not",
 	"if the service exists then run the command",
-	"if the service is inactive then run the command",
-	"if the service is not started then run the command",
 	"list all available services",
 	"resolve the service name to an init script",
 	longopts_help_COMMON
@@ -60,10 +56,7 @@ int main(int argc, char **argv)
 	char *service;
 	RC_STRINGLIST *list;
 	RC_STRING *s;
-	RC_SERVICE state;
 	bool if_exists = false;
-	bool if_inactive = false;
-	bool if_notstarted = false;
 
 	applet = basename_c(argv[0]);
 	/* Ensure that we are only quiet when explicitly told to be */
@@ -84,12 +77,6 @@ int main(int argc, char **argv)
 		case 'i':
 			if_exists = true;
 			break;
-		case 'I':
-			if_inactive = true;
-			break;
-		case 'N':
-			if_notstarted = true;
-			break;
 		case 'l':
 			list = rc_services_in_runlevel(NULL);
 			if (TAILQ_FIRST(list) == NULL)
@@ -126,11 +113,6 @@ int main(int argc, char **argv)
 			return 0;
 		eerrorx("%s: service `%s' does not exist", applet, *argv);
 	}
-	state = rc_service_state(*argv);
-	if (if_inactive && ! (state & RC_SERVICE_INACTIVE))
-		return 0;
-	if (if_notstarted && (state & RC_SERVICE_STARTED))
-		return 0;
 	*argv = service;
 	execv(*argv, argv);
 	eerrorx("%s: %s", applet, strerror(errno));

src/rc/rc.c

@@ -281,10 +281,15 @@ open_shell(void)
 	struct passwd *pw;
 
 #ifdef __linux__
-	const char *sys = rc_sys();
+	const char *sys = NULL;
 	
-	/* VSERVER systems cannot really drop to shells */
+	sys = detect_container();
-	if (sys && strcmp(sys, RC_SYS_VSERVER) == 0)
+	if (!sys)
+		sys = detect_vm();
+
+	/* VSERVER and OPENVZ systems cannot really drop to shells */
+	if (sys &&
+	    (strcmp(sys, "VSERVER") == 0 || strcmp(sys, "OPENVZ") == 0))
 	{
 		execl("/sbin/halt", "/sbin/halt", "-f", (char *) NULL);
 		eerrorx("%s: unable to exec `/sbin/halt': %s",
@@ -486,7 +491,10 @@ do_sysinit()
 	    uts.machine);
 #endif
 
-	if ((sys = rc_sys()))
+	sys = detect_container();
+	if (!sys)
+		sys = detect_vm();
+	if (sys)
 		printf(" [%s]", sys);
 
 	printf("%s\n\n", ecolor(ECOLOR_NORMAL));
@@ -501,7 +509,10 @@ do_sysinit()
 
 	/* init may have mounted /proc so we can now detect or real
 	 * sys */
-	if ((sys = rc_sys()))
+	sys = detect_container();
+	if (!sys)
+		sys = detect_vm();
+	if (sys)
 		setenv("RC_SYS", sys, 1);
 }
 
@@ -821,7 +832,9 @@ int main(int argc, char **argv)
 			eerrorx("%s: %s", applet, strerror(errno));
 			/* NOTREACHED */
 		case 'S':
-			systype = rc_sys();
+			systype = detect_container();
+			if (!systype)
+				systype = detect_vm();
 			if (systype)
 				printf("%s\n", systype);
 			exit(EXIT_SUCCESS);
@@ -830,8 +843,6 @@ int main(int argc, char **argv)
 		}
 	}
 
-	if (strcmp(applet, "rc") == 0)
-		ewarn("rc is deprecated, please use openrc instead.");
 	newlevel = argv[optind++];
 	/* To make life easier, we only have the shutdown runlevel as
 	 * nothing really needs to know that we're rebooting.

src/rc/start-stop-daemon.c

@@ -1242,7 +1242,7 @@ int main(int argc, char **argv)
 		if (redirect_stdout) {
 			if ((stdout_fd = open(redirect_stdout,
 				    O_WRONLY | O_CREAT | O_APPEND,
-				    S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP)) == -1)
+				    S_IRUSR | S_IWUSR)) == -1)
 				eerrorx("%s: unable to open the logfile"
 				    " for stdout `%s': %s",
 				    applet, redirect_stdout, strerror(errno));
@@ -1250,7 +1250,7 @@ int main(int argc, char **argv)
 		if (redirect_stderr) {
 			if ((stderr_fd = open(redirect_stderr,
 				    O_WRONLY | O_CREAT | O_APPEND,
-				    S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP)) == -1)
+				    S_IRUSR | S_IWUSR)) == -1)
 				eerrorx("%s: unable to open the logfile"
 				    " for stderr `%s': %s",
 				    applet, redirect_stderr, strerror(errno));

src/rc/supervise-daemon.c

@@ -1,726 +0,0 @@
-/*
- * supervise-daemon
- * This is an experimental supervisor for daemons.
- * It will start a deamon and make sure it restarts if it crashes.
- */
-
-/*
- * Copyright (c) 2016 The OpenRC Authors.
- * See the Authors file at the top-level directory of this distribution and
- * https://github.com/OpenRC/openrc/blob/master/AUTHORS
- *
- * This file is part of OpenRC. It is subject to the license terms in
- * the LICENSE file found in the top-level directory of this
- * distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
- * This file may not be copied, modified, propagated, or distributed
- *    except according to the terms contained in the LICENSE file.
- */
-
-/* nano seconds */
-#define POLL_INTERVAL   20000000
-#define WAIT_PIDFILE   500000000
-#define ONE_SECOND    1000000000
-#define ONE_MS           1000000
-
-#include <sys/types.h>
-#include <sys/ioctl.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <termios.h>
-#include <sys/time.h>
-#include <sys/wait.h>
-
-#ifdef __linux__
-#include <sys/syscall.h> /* For io priority */
-#endif
-
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <getopt.h>
-#include <limits.h>
-#include <grp.h>
-#include <pwd.h>
-#include <signal.h>
-#include <stddef.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <syslog.h>
-#include <time.h>
-#include <unistd.h>
-
-#ifdef HAVE_PAM
-#include <security/pam_appl.h>
-
-/* We are not supporting authentication conversations */
-static struct pam_conv conv = { NULL, NULL};
-#endif
-
-#include "einfo.h"
-#include "queue.h"
-#include "rc.h"
-#include "rc-misc.h"
-#include "_usage.h"
-
-const char *applet = NULL;
-const char *extraopts = NULL;
-const char *getoptstring = "d:e:g:I:Kk:N:p:r:Su:1:2:" \
-	getoptstring_COMMON;
-const struct option longopts[] = {
-	{ "chdir",        1, NULL, 'd'},
-	{ "env",          1, NULL, 'e'},
-	{ "group",        1, NULL, 'g'},
-	{ "ionice",       1, NULL, 'I'},
-	{ "stop",         0, NULL, 'K'},
-	{ "umask",        1, NULL, 'k'},
-	{ "nicelevel",    1, NULL, 'N'},
-	{ "pidfile",      1, NULL, 'p'},
-	{ "user",         1, NULL, 'u'},
-	{ "chroot",       1, NULL, 'r'},
-	{ "start",        0, NULL, 'S'},
-	{ "stdout",       1, NULL, '1'},
-	{ "stderr",       1, NULL, '2'},
-	longopts_COMMON
-};
-const char * const longopts_help[] = {
-	"Change the PWD",
-	"Set an environment string",
-	"Change the process group",
-	"Set an ionice class:data when starting",
-	"Stop daemon",
-	"Set the umask for the daemon",
-	"Set a nicelevel when starting",
-	"Match pid found in this file",
-	"Change the process user",
-	"Chroot to this directory",
-	"Start daemon",
-	"Redirect stdout to file",
-	"Redirect stderr to file",
-	longopts_help_COMMON
-};
-const char *usagestring = NULL;
-
-static int nicelevel = 0;
-static int ionicec = -1;
-static int ioniced = 0;
-static char *changeuser, *ch_root, *ch_dir;
-static uid_t uid = 0;
-static gid_t gid = 0;
-static int devnull_fd = -1;
-static int stdin_fd;
-static int stdout_fd;
-static int stderr_fd;
-static char *redirect_stderr = NULL;
-static char *redirect_stdout = NULL;
-static bool exiting = false;
-#ifdef TIOCNOTTY
-static int tty_fd = -1;
-#endif
-
-extern char **environ;
-
-#if !defined(SYS_ioprio_set) && defined(__NR_ioprio_set)
-# define SYS_ioprio_set __NR_ioprio_set
-#endif
-#if !defined(__DragonFly__)
-static inline int ioprio_set(int which, int who, int ioprio)
-{
-#ifdef SYS_ioprio_set
-	return syscall(SYS_ioprio_set, which, who, ioprio);
-#else
-	return 0;
-#endif
-}
-#endif
-
-static void cleanup(void)
-{
-	free(changeuser);
-}
-
-static pid_t get_pid(const char *pidfile)
-{
-	FILE *fp;
-	pid_t pid;
-
-	if (! pidfile)
-		return -1;
-
-	if ((fp = fopen(pidfile, "r")) == NULL) {
-		ewarnv("%s: fopen `%s': %s", applet, pidfile, strerror(errno));
-		return -1;
-	}
-
-	if (fscanf(fp, "%d", &pid) != 1) {
-		ewarnv("%s: no pid found in `%s'", applet, pidfile);
-		fclose(fp);
-		return -1;
-	}
-
-	fclose(fp);
-
-	return pid;
-}
-
-static void child_process(char *exec, char **argv)
-{
-	RC_STRINGLIST *env_list;
-	RC_STRING *env;
-	int i;
-	char *p;
-	char *token;
-	size_t len;
-	char *newpath;
-	char *np;
-	char **c;
-	char cmdline[PATH_MAX];
-
-#ifdef HAVE_PAM
-	pam_handle_t *pamh = NULL;
-	int pamr;
-	const char *const *pamenv = NULL;
-#endif
-
-	setsid();
-
-	if (nicelevel) {
-		if (setpriority(PRIO_PROCESS, getpid(), nicelevel) == -1)
-			eerrorx("%s: setpriority %d: %s", applet, nicelevel,
-					strerror(errno));
-	}
-
-	if (ionicec != -1 && ioprio_set(1, getpid(), ionicec | ioniced) == -1)
-		eerrorx("%s: ioprio_set %d %d: %s", applet, ionicec, ioniced,
-				strerror(errno));
-
-	if (ch_root && chroot(ch_root) < 0)
-		eerrorx("%s: chroot `%s': %s", applet, ch_root, strerror(errno));
-
-	if (ch_dir && chdir(ch_dir) < 0)
-		eerrorx("%s: chdir `%s': %s", applet, ch_dir, strerror(errno));
-
-#ifdef HAVE_PAM
-	if (changeuser != NULL) {
-		pamr = pam_start("supervise-daemon",
-		    changeuser, &conv, &pamh);
-
-		if (pamr == PAM_SUCCESS)
-			pamr = pam_acct_mgmt(pamh, PAM_SILENT);
-		if (pamr == PAM_SUCCESS)
-			pamr = pam_open_session(pamh, PAM_SILENT);
-		if (pamr != PAM_SUCCESS)
-			eerrorx("%s: pam error: %s", applet, pam_strerror(pamh, pamr));
-	}
-#endif
-
-	if (gid && setgid(gid))
-		eerrorx("%s: unable to set groupid to %d", applet, gid);
-	if (changeuser && initgroups(changeuser, gid))
-		eerrorx("%s: initgroups (%s, %d)", applet, changeuser, gid);
-	if (uid && setuid(uid))
-		eerrorx ("%s: unable to set userid to %d", applet, uid);
-
-	/* Close any fd's to the passwd database */
-	endpwent();
-
-#ifdef TIOCNOTTY
-	ioctl(tty_fd, TIOCNOTTY, 0);
-	close(tty_fd);
-#endif
-
-	/* Clean the environment of any RC_ variables */
-	env_list = rc_stringlist_new();
-	i = 0;
-	while (environ[i])
-		rc_stringlist_add(env_list, environ[i++]);
-
-#ifdef HAVE_PAM
-	if (changeuser != NULL) {
-		pamenv = (const char *const *)pam_getenvlist(pamh);
-		if (pamenv) {
-			while (*pamenv) {
-				/* Don't add strings unless they set a var */
-				if (strchr(*pamenv, '='))
-					putenv(xstrdup(*pamenv));
-				else
-					unsetenv(*pamenv);
-				pamenv++;
-			}
-		}
-	}
-#endif
-
-	TAILQ_FOREACH(env, env_list, entries) {
-		if ((strncmp(env->value, "RC_", 3) == 0 &&
-			strncmp(env->value, "RC_SERVICE=", 10) != 0 &&
-			strncmp(env->value, "RC_SVCNAME=", 10) != 0) ||
-		    strncmp(env->value, "SSD_NICELEVEL=", 14) == 0)
-		{
-			p = strchr(env->value, '=');
-			*p = '\0';
-			unsetenv(env->value);
-			continue;
-		}
-	}
-	rc_stringlist_free(env_list);
-
-	/* For the path, remove the rcscript bin dir from it */
-	if ((token = getenv("PATH"))) {
-		len = strlen(token);
-		newpath = np = xmalloc(len + 1);
-		while (token && *token) {
-			p = strchr(token, ':');
-			if (p) {
-				*p++ = '\0';
-				while (*p == ':')
-					p++;
-			}
-			if (strcmp(token, RC_LIBEXECDIR "/bin") != 0 &&
-			    strcmp(token, RC_LIBEXECDIR "/sbin") != 0)
-			{
-				len = strlen(token);
-				if (np != newpath)
-					*np++ = ':';
-				memcpy(np, token, len);
-				np += len;
-				}
-			token = p;
-		}
-		*np = '\0';
-		unsetenv("PATH");
-		setenv("PATH", newpath, 1);
-	}
-
-	stdin_fd = devnull_fd;
-	stdout_fd = devnull_fd;
-	stderr_fd = devnull_fd;
-	if (redirect_stdout) {
-		if ((stdout_fd = open(redirect_stdout,
-			    O_WRONLY | O_CREAT | O_APPEND,
-			    S_IRUSR | S_IWUSR)) == -1)
-			eerrorx("%s: unable to open the logfile"
-				    " for stdout `%s': %s",
-				    applet, redirect_stdout, strerror(errno));
-	}
-	if (redirect_stderr) {
-		if ((stderr_fd = open(redirect_stderr,
-			    O_WRONLY | O_CREAT | O_APPEND,
-			    S_IRUSR | S_IWUSR)) == -1)
-			eerrorx("%s: unable to open the logfile"
-			    " for stderr `%s': %s",
-			    applet, redirect_stderr, strerror(errno));
-	}
-
-	dup2(stdin_fd, STDIN_FILENO);
-	if (redirect_stdout || rc_yesno(getenv("EINFO_QUIET")))
-		dup2(stdout_fd, STDOUT_FILENO);
-	if (redirect_stderr || rc_yesno(getenv("EINFO_QUIET")))
-		dup2(stderr_fd, STDERR_FILENO);
-
-	for (i = getdtablesize() - 1; i >= 3; --i)
-		close(i);
-
-	*cmdline = '\0';
-	c = argv;
-	while (*c) {
-		strcat(cmdline, *c);
-		strcat(cmdline, " ");
-		c++;
-	}
-	syslog(LOG_INFO, "Running command line: %s", cmdline);
-	execvp(exec, argv);
-
-#ifdef HAVE_PAM
-	if (changeuser != NULL && pamr == PAM_SUCCESS)
-		pam_close_session(pamh, PAM_SILENT);
-#endif
-	eerrorx("%s: failed to exec `%s': %s", applet, exec,strerror(errno));
-}
-
-static void handle_signal(int sig)
-{
-	int serrno = errno;
-	char signame[10] = { '\0' };
-
-	switch (sig) {
-	case SIGINT:
-		snprintf(signame, sizeof(signame), "SIGINT");
-		break;
-	case SIGTERM:
-		snprintf(signame, sizeof(signame), "SIGTERM");
-		break;
-	case SIGQUIT:
-		snprintf(signame, sizeof(signame), "SIGQUIT");
-		break;
-	}
-
-	if (*signame != 0) {
-		syslog(LOG_INFO, "%s: caught signal %s, exiting", applet, signame);
-		exiting = true;
-	} else
-		syslog(LOG_INFO, "%s: caught unknown signal %d", applet, sig);
-
-	/* Restore errno */
-	errno = serrno;
-}
-
-static char * expand_home(const char *home, const char *path)
-{
-	char *opath, *ppath, *p, *nh;
-	size_t len;
-	struct passwd *pw;
-
-	if (!path || *path != '~')
-		return xstrdup(path);
-
-	opath = ppath = xstrdup(path);
-	if (ppath[1] != '/' && ppath[1] != '\0') {
-		p = strchr(ppath + 1, '/');
-		if (p)
-			*p = '\0';
-		pw = getpwnam(ppath + 1);
-		if (pw) {
-			home = pw->pw_dir;
-			ppath = p;
-			if (ppath)
-				*ppath = '/';
-		} else
-			home = NULL;
-	} else
-		ppath++;
-
-	if (!home) {
-	free(opath);
-		return xstrdup(path);
-	}
-	if (!ppath) {
-		free(opath);
-		return xstrdup(home);
-	}
-
-	len = strlen(ppath) + strlen(home) + 1;
-	nh = xmalloc(len);
-	snprintf(nh, len, "%s%s", home, ppath);
-	free(opath);
-	return nh;
-}
-
-int main(int argc, char **argv)
-{
-	int opt;
-	bool start = false;
-	bool stop = false;
-	char *exec = NULL;
-	char *pidfile = NULL;
-	char *home = NULL;
-	int tid = 0;
-	pid_t child_pid, pid;
-	char *svcname = getenv("RC_SVCNAME");
-	char *tmp;
-	char *p;
-	char *token;
-	int i;
-	char exec_file[PATH_MAX];
-	struct passwd *pw;
-	struct group *gr;
-	FILE *fp;
-	mode_t numask = 022;
-
-	applet = basename_c(argv[0]);
-	atexit(cleanup);
-
-	signal_setup(SIGINT, handle_signal);
-	signal_setup(SIGQUIT, handle_signal);
-	signal_setup(SIGTERM, handle_signal);
-	openlog(applet, LOG_PID, LOG_DAEMON);
-
-	if ((tmp = getenv("SSD_NICELEVEL")))
-		if (sscanf(tmp, "%d", &nicelevel) != 1)
-			eerror("%s: invalid nice level `%s' (SSD_NICELEVEL)",
-			    applet, tmp);
-
-	/* Get our user name and initial dir */
-	p = getenv("USER");
-	home = getenv("HOME");
-	if (home == NULL || p == NULL) {
-		pw = getpwuid(getuid());
-		if (pw != NULL) {
-			if (p == NULL)
-				setenv("USER", pw->pw_name, 1);
-			if (home == NULL) {
-				setenv("HOME", pw->pw_dir, 1);
-				home = pw->pw_dir;
-			}
-		}
-	}
-
-	while ((opt = getopt_long(argc, argv, getoptstring, longopts,
-		    (int *) 0)) != -1)
-		switch (opt) {
-		case 'I': /* --ionice */
-			if (sscanf(optarg, "%d:%d", &ionicec, &ioniced) == 0)
-				eerrorx("%s: invalid ionice `%s'",
-				    applet, optarg);
-			if (ionicec == 0)
-				ioniced = 0;
-			else if (ionicec == 3)
-				ioniced = 7;
-			ionicec <<= 13; /* class shift */
-			break;
-
-		case 'K':  /* --stop */
-			stop = true;
-			break;
-
-		case 'N':  /* --nice */
-			if (sscanf(optarg, "%d", &nicelevel) != 1)
-				eerrorx("%s: invalid nice level `%s'",
-				    applet, optarg);
-			break;
-
-		case 'S':  /* --start */
-			start = true;
-			break;
-
-		case 'd':  /* --chdir /new/dir */
-			ch_dir = optarg;
-			break;
-
-		case 'e': /* --env */
-			putenv(optarg);
-			break;
-
-		case 'g':  /* --group <group>|<gid> */
-			if (sscanf(optarg, "%d", &tid) != 1)
-				gr = getgrnam(optarg);
-			else
-				gr = getgrgid((gid_t)tid);
-			if (gr == NULL)
-				eerrorx("%s: group `%s' not found",
-				    applet, optarg);
-			gid = gr->gr_gid;
-			break;
-
-		case 'k':
-			if (parse_mode(&numask, optarg))
-				eerrorx("%s: invalid mode `%s'",
-				    applet, optarg);
-			break;
-
-		case 'p':  /* --pidfile <pid-file> */
-			pidfile = optarg;
-			break;
-
-		case 'r':  /* --chroot /new/root */
-			ch_root = optarg;
-			break;
-
-		case 'u':  /* --user <username>|<uid> */
-		{
-			p = optarg;
-			tmp = strsep(&p, ":");
-			changeuser = xstrdup(tmp);
-			if (sscanf(tmp, "%d", &tid) != 1)
-				pw = getpwnam(tmp);
-			else
-				pw = getpwuid((uid_t)tid);
-
-			if (pw == NULL)
-				eerrorx("%s: user `%s' not found",
-				    applet, tmp);
-			uid = pw->pw_uid;
-			home = pw->pw_dir;
-			unsetenv("HOME");
-			if (pw->pw_dir)
-				setenv("HOME", pw->pw_dir, 1);
-			unsetenv("USER");
-			if (pw->pw_name)
-				setenv("USER", pw->pw_name, 1);
-			if (gid == 0)
-				gid = pw->pw_gid;
-
-			if (p) {
-				tmp = strsep (&p, ":");
-				if (sscanf(tmp, "%d", &tid) != 1)
-					gr = getgrnam(tmp);
-				else
-					gr = getgrgid((gid_t) tid);
-
-				if (gr == NULL)
-					eerrorx("%s: group `%s'"
-					    " not found",
-					    applet, tmp);
-				gid = gr->gr_gid;
-			}
-		}
-		break;
-
-		case '1':   /* --stdout /path/to/stdout.lgfile */
-			redirect_stdout = optarg;
-			break;
-
-		case '2':  /* --stderr /path/to/stderr.logfile */
-			redirect_stderr = optarg;
-			break;
-
-		case_RC_COMMON_GETOPT
-		}
-
-	if (!pidfile)
-		eerrorx("%s: --pidfile must be specified", applet);
-
-	endpwent();
-	argc -= optind;
-	argv += optind;
-	exec = *argv;
-
-	if (start) {
-		if (!exec)
-			eerrorx("%s: nothing to start", applet);
-	}
-
-	/* Expand ~ */
-	if (ch_dir && *ch_dir == '~')
-		ch_dir = expand_home(home, ch_dir);
-	if (ch_root && *ch_root == '~')
-		ch_root = expand_home(home, ch_root);
-	if (exec) {
-		if (*exec == '~')
-			exec = expand_home(home, exec);
-
-		/* Validate that the binary exists if we are starting */
-		if (*exec == '/' || *exec == '.') {
-			/* Full or relative path */
-			if (ch_root)
-				snprintf(exec_file, sizeof(exec_file),
-				    "%s/%s", ch_root, exec);
-			else
-				snprintf(exec_file, sizeof(exec_file),
-				    "%s", exec);
-		} else {
-			/* Something in $PATH */
-			p = tmp = xstrdup(getenv("PATH"));
-			*exec_file = '\0';
-			while ((token = strsep(&p, ":"))) {
-				if (ch_root)
-					snprintf(exec_file, sizeof(exec_file),
-					    "%s/%s/%s",
-					    ch_root, token, exec);
-				else
-					snprintf(exec_file, sizeof(exec_file),
-					    "%s/%s", token, exec);
-				if (exists(exec_file))
-					break;
-				*exec_file = '\0';
-			}
-			free(tmp);
-		}
-	}
-	if (start && !exists(exec_file))
-		eerrorx("%s: %s does not exist", applet,
-		    *exec_file ? exec_file : exec);
-
-	if (stop) {
-		pid = get_pid(pidfile);
-		if (pid == -1)
-			i = pid;
-		else
-			i = kill(pid, SIGTERM);
-		if (i != 0)
-			/* We failed to stop something */
-			exit(EXIT_FAILURE);
-
-		/* Even if we have not actually killed anything, we should
-		 * remove information about it as it may have unexpectedly
-		 * crashed out. We should also return success as the end
-		 * result would be the same. */
-		if (pidfile && exists(pidfile))
-			unlink(pidfile);
-		if (svcname)
-			rc_service_daemon_set(svcname, exec,
-			    (const char *const *)argv,
-			    pidfile, false);
-		exit(EXIT_SUCCESS);
-	}
-
-	pid = get_pid(pidfile);
-	if (pid != -1)
-		if (kill(pid, 0) == 0)
-			eerrorx("%s: %s is already running", applet, exec);
-
-	einfov("Detaching to start `%s'", exec);
-	eindentv();
-
-	/* Remove existing pidfile */
-	if (pidfile)
-		unlink(pidfile);
-
-	/*
-	 * Make sure we can write a pid file
-	 */
-	fp = fopen(pidfile, "w");
-	if (! fp)
-		eerrorx("%s: fopen `%s': %s", applet, pidfile, strerror(errno));
-		fclose(fp);
-
-	child_pid = fork();
-	if (child_pid == -1)
-		eerrorx("%s: fork: %s", applet, strerror(errno));
-
-	/* first parent process, do nothing. */
-	if (child_pid != 0)
-		exit(EXIT_SUCCESS);
-
-	child_pid = fork();
-	if (child_pid == -1)
-		eerrorx("%s: fork: %s", applet, strerror(errno));
-
-	if (child_pid != 0) {
-		/* this is the supervisor */
-		umask(numask);
-
-#ifdef TIOCNOTTY
-		tty_fd = open("/dev/tty", O_RDWR);
-#endif
-
-		devnull_fd = open("/dev/null", O_RDWR);
-
-		fp = fopen(pidfile, "w");
-		if (! fp)
-			eerrorx("%s: fopen `%s': %s", applet, pidfile, strerror(errno));
-		fprintf(fp, "%d\n", getpid());
-		fclose(fp);
-
-		/*
-		 * Supervisor main loop
-		 */
-		i = 0;
-		while (!exiting) {
-			wait(&i);
-			if (exiting) {
-				syslog(LOG_INFO, "stopping %s, pid %d", exec, child_pid);
-				kill(child_pid, SIGTERM);
-			} else {
-				if (WIFEXITED(i))
-					syslog(LOG_INFO, "%s, pid %d, exited with return code %d",
-							exec, child_pid, WEXITSTATUS(i));
-				else if (WIFSIGNALED(i))
-					syslog(LOG_INFO, "%s, pid %d, terminated by signal %d",
-							exec, child_pid, WTERMSIG(i));
-				child_pid = fork();
-				if (child_pid == -1)
-					eerrorx("%s: fork: %s", applet, strerror(errno));
-				if (child_pid == 0)
-					child_process(exec, argv);
-			}
-		}
-
-		if (svcname)
-			rc_service_daemon_set(svcname, exec,
-									(const char * const *) argv, pidfile, true);
-
-		exit(EXIT_SUCCESS);
-	} else if (child_pid == 0)
-		child_process(exec, argv);
-}

src/rc/supervise-daemon.pam

@@ -1,6 +0,0 @@
-#%PAM-1.0
-
-auth            required        pam_permit.so
-account         required        pam_permit.so
-password        required        pam_deny.so
-session         optional        pam_limits.so

src/rc/swclock.c

@@ -30,7 +30,6 @@
 #include <utime.h>
 
 #include "einfo.h"
-#include "rc.h"
 #include "rc-misc.h"
 #include "_usage.h"
 

src/test/runtests.sh

@@ -85,14 +85,12 @@ eend $? "Trailing newlines need to be deleted:"$'\n'"${out}"
 
 ebegin "Checking for obsolete functions"
 out=$(cd ${top_srcdir}; find src -name '*.[ch]' \
-	! -name queue.h \
 	-exec grep -n -E '\<(malloc|memory|sys/(errno|fcntl|signal|stropts|termios|unistd))\.h\>' {} +)
 [ -z "${out}" ]
 eend $? "Avoid these obsolete functions:"$'\n'"${out}"
 
 ebegin "Checking for x* func usage"
 out=$(cd ${top_srcdir}; find src -name '*.[ch]' \
-	! -name queue.h \
 	-exec grep -n -E '\<(malloc|strdup)[[:space:]]*\(' {} + \
 	| grep -v \
 		-e src/includes/helpers.h \
@@ -102,7 +100,6 @@ eend $? "These need to be using the x* variant:"$'\n'"${out}"
 
 ebegin "Checking spacing style"
 out=$(cd ${top_srcdir}; find src -name '*.[ch]' \
-	! -name queue.h \
 	-exec grep -n -E \
 		-e '\<(for|if|switch|while)\(' \
 		-e '\<(for|if|switch|while) \( ' \

supervise-daemon-guide.md

@@ -1,49 +0,0 @@
-# Using supervise-daemon
-
-Beginning with OpenRC-0.21 we have our own daemon supervisor,
-supervise-daemon., which can start a daemon and restart it if it
-terminates unexpectedly.
-
-The following is a brief guide on using this capability.
-
-## Use Default start, stop and status functions
-
-If you write your own start, stop and status functions in your service
-script, none of this will work. You must allow OpenRC to use the default
-functions.
-
-## Daemons must not fork
-
-Any deamon that you would like to have monitored by supervise-daemon
-must not fork. Instead, it must stay in the foreground. If the daemon
-itself forks, the supervisor will be unable to monitor it.
-
-If the daemon can be configured to not fork, this should be done in the
-daemon's configuration file, or by adding a command line option that
-instructs it not to fork to the command_args_foreground variable shown
-below.
-
-## Variable Settings
-
-The most important setting is the supervisor variable. At the top of
-your service script, you should set this variable as follows:
-
-supervisor=supervise-daemon
-
-Several other variables affect the way services behave under
-supervise-daemon. They are documented on the  openrc-run man page, but I
-will list them here for convenience:
-
-pidfile=/pid/of/supervisor.pid
-
-If you are using start-stop-daemon to monitor your scripts, the pidfile
-is the path to the pidfile the daemon creates. If, on the other hand,
-you are using supervise-daemon, this is the path to the pidfile the
-supervisor creates.
-
-command_args_foreground should be used if the daemon you want to monitor
-forks and goes to the background by default. This should be set to the
-command line option that instructs the daemon to stay in the foreground.
-
-This is very early support, so feel free to file bugs if you have
-issues.

test/setup_env.sh

@@ -21,3 +21,7 @@ LD_LIBRARY_PATH=${top_builddir}/src/libeinfo:${top_builddir}/src/librc:${LD_LIBR
 PATH=${top_builddir}/src/rc:${PATH}
 export LD_LIBRARY_PATH PATH
 
+cd ${top_srcdir}/src/rc
+${MAKE:-make} links >/dev/null
+cd -
+