update ChangeLog

This path should not be hard coded in the open call.
Linux prior to 2.4.19 did not have /proc/self/mounts, so for now I'm
making this value /proc/mounts everywhere, but that may change to
/proc/self/mounts on linux; I'm not sure we should care about <2.4.19.

X-Gentoo-Bug: 604646
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=604646

Makefile

@@ -13,7 +13,7 @@ MK=			${TOP}/mk
 
 include ${TOP}/Makefile.inc
 
-SUBDIR=		conf.d etc init.d local.d man scripts sh src support sysctl.d
+SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
 
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.34.11
+VERSION=	0.23.1
 PKG=		${NAME}-${VERSION}

NEWS.md

@@ -3,64 +3,6 @@
 This file will contain a list of notable changes for each release. Note
 the information in this file is in reverse order.
 
-## OpenRC 0.33
-
-This version removes the "service" binary which was just a copy of
-"rc-service" provided for compatibility.
-
-If you still need the "service" binary, as opposed to "rc-service", it is
-recommended that you use something like Debian's init-system-helpers.
-Otherwise, just use "rc-service" in place of "service".
-
-## OpenRC 0.31
-
-This version adds support for Control Groups version 2, which is
-considered stable as of Linux-4.13. Please see /etc/rc.conf for
-documentation on how to configure control groups.
-
-## OpenRC-0.28
-
-This version mounts efivars read only due to concerns about changes in
-this file system making systems unbootable.  If you need to change something
-in this path, you will need to re-mount it read-write, make the change
-and re-mount it read-only.
-
-Also, you can override this behavior by adding a line for efivars to
-fstab if you want efivars mounted read-write.
-
-For more information on this issue, see the following url:
-
-https://github.com/openrc/openrc/issues/134
-
-## OpenRC-0.25
-
-This version contains an OpenRC-specific implementation of init for
-Linux which can be used in place of sysvinit or any other init process.
-For information on its usage, see the man pages for openrc-init (8) and
-openrc-shutdown (8).
-
-## OpenRC-0.24.1
-
-This version starts cleaning up the dependencies so that rc_parallel
-will work correctly.
-
-The first step in this process is to remove the 'before *' from the
-depend functions in the clock services. This means some  services not
-controlled by OpenRC may now start before instead of after the clock
-service. If it is important for these services to start after the clock
-service, they need to have 'after clock' added to their depend
-functions.
-
-## OpenRC-0.24
-
-Since the deptree2dot tool and the perl requirement are completely
-optional, the deptree2dot tool has been moved to the support directory.
-As a result, the MKTOOLS=yes/no switch has been removed from the makefiles.
-
-This version adds the agetty service which can be used to spawn
-agetty on a specific terminal. This is currently documented in the
-agetty-guide.md file at the top level of this distribution.
-
 ## OpenRC-0.23
 
 The tmpfiles.d processing code, which was part of previous versions of

README.md

@@ -28,9 +28,9 @@ MKPREFIX=yes
 MKPKGCONFIG=no
 MKSELINUX=yes
 MKSTATICLIBS=no
-MKSYSVINIT=yes
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
+MKTOOLS=yes
 PKG_PREFIX=/usr/pkg
 LOCAL_PREFIX=/usr/local
 PREFIX=/usr/local
@@ -73,6 +73,10 @@ Obviously, if you're installing this onto a system that does not use
 OpenRC by default then you may wish to backup the above listed files,
 remove them and then install so that the OS hooks into OpenRC.
 
+`init.d.misc` is not installed by default as the scripts will need
+tweaking on a per distro basis. They are also non essential to the
+operation of the system.
+
 ## Reporting Bugs
 
 If you are using Gentoo Linux, bugs can be filed on their bugzilla under

agetty-guide.md

@@ -1,18 +0,0 @@
-# Setting up the agetty service in OpenRC
-
-The agetty service is an OpenRC specific way to monitor and respawn a
-getty, using agetty, on Linux. To use this method, make sure you aren't
-spawning a getty manager for this port some other way (such as through
-sysvinit/inittab), then run the following commands as root.
-
-Note that [port] refers to the port you are spawning the getty on, for
-example, tty1 or ttyS0. The full path to it, for example, /dev/tty1
-should not be used.
-
-```
-# cd /etc/init.d
-# ln -s agetty agetty.[port]
-# cd /etc/conf.d
-# cp agetty agetty.[port]
-#rc-update add agetty.[port] [runlevel]
-```

conf.d/Makefile

@@ -12,8 +12,8 @@ include ${MK}/os.mk
 
 CONF-FreeBSD=	ipfw modules moused powerd rarpd savecore syscons
 
-CONF-Linux=	agetty consolefont devfs dmesg hwclock keymaps killprocs modules \
+CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules mtab \
-	mtab net-online
+	net-online
 
 CONF-NetBSD=	moused rarpd savecore
 

conf.d/agetty

@@ -1,11 +0,0 @@
-# make agetty quiet
-#quiet="yes"
-
-# Set the baud rate of the terminal line
-#baud=""
-
-# set the terminal type
-#term_type="linux"
-
-# extra options to pass to agetty for this port
-#agetty_options=""

conf.d/killprocs

@@ -1,6 +1,3 @@
-# If you wish to pass any options to kill_all during shutdown,
+# If you wish to pass any options to killall5 during shutdown,
 # you should do so here.
-#
-# The setting is called killall5_opts because the options here are meant
-# to be identical to those you could pass to killall5.
 killall5_opts=""

conf.d/localmount

@@ -3,7 +3,7 @@
 #no_umounts="/dir1:/var/dir2"
 #
 # Mark certain mount points as critical.
-# This contains a space separated list of mount points which should be
+# This contains aspace separated list of mount points which should be
 # considered critical. If one of these mount points cannot be mounted,
 # localmount will fail.
 # By default, this is empty.

conf.d/net-online

@@ -3,13 +3,10 @@
 # default is all interfaces that support ethernet.
 #interfaces=""
 
-# This setting controls whether a ping test is included in the test for
+# This setting controls whether a ping to the default gateway is
-# network connectivity after all interfaces are active.
+# included in the test for network connectivity after all interfaces
-#include_ping_test=no
+# are active.
-
+#ping_default_gateway=no
-# This setting is the host to attempt to ping if the above is yes.
-# The default is google.com.
-#ping_test_host=some.host.name
 
 # The timeout setting controls how long the net-online service waits
 # for the network to be configured.

etc/rc.conf

@@ -178,11 +178,6 @@
 # "xenU"           - XenU Domain (Linux and NetBSD)
 #rc_sys=""
 
-# if  you use openrc-init, which is currently only available on Linux,
-# this is the default runlevel to activate after "sysinit" and "boot"
-# when booting.
-#rc_default_runlevel="default"
-
 # on Linux and Hurd, this is the number of ttys allocated for logins
 # It is used in the consolefont, keymaps, numlock and termencoding
 # service scripts.
@@ -191,43 +186,13 @@ rc_tty_number=12
 ##############################################################################
 # LINUX CGROUPS RESOURCE MANAGEMENT
 
-# This sets the mode used to mount cgroups.
+# If you have cgroups turned on in your kernel, this switch controls
-# "hybrid" mounts cgroups version 2 on /sys/fs/cgroup/unified and
+# whether or not a group for each controller is mounted under
-# cgroups version 1 on /sys/fs/cgroup.
+# /sys/fs/cgroup.
-# "legacy" mounts cgroups version 1 on /sys/fs/cgroup
+# None of the other options in this section work if this is set to "NO".
-# "unified" mounts cgroups version 2 on /sys/fs/cgroup
-#rc_cgroup_mode="hybrid"
-
-# This is a list of controllers which should be enabled for cgroups version 2.
-# If hybrid mode is being used, controllers listed here will not be
-# available for cgroups version 1.
-# This is a global setting.
-#rc_cgroup_controllers=""
-
-# This variable contains the cgroups version 2 settings for your services.
-# If this is set in this file, the settings will apply to all services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the setting and value followed by a newline.
-# Multiple settings and values can be specified.
-# For example, you would use this to set the maximum memory and maximum
-# number of pids for a service.
-#rc_cgroup_settings="
-#memory.max 10485760
-#pids.max max
-#"
-#
-# For more information about the adjustments that can be made with
-# cgroups version 2, see Documentation/cgroups-v2.txt in the linux kernel
-# source tree.
-#rc_cgroup_settings=""
-
-# This switch controls whether or not cgroups version 1 controllers are
-# individually mounted under
-# /sys/fs/cgroup in hybrid or legacy mode.
 #rc_controller_cgroups="YES"
 
-# The following settings allow you to set up values for the cgroups version 1
+# The following settings allow you to set up values for the cgroup
 # controllers for your services.
 # They can be set in this file;, however, if you do this, the settings
 # will apply to all of your services.
@@ -241,9 +206,8 @@ rc_tty_number=12
 # cpu.shares 512
 # "
 #
-# For more information about the adjustments that can be made with
+#For more information about the adjustments that can be made with
-# cgroups version 1, see Documentation/cgroups-v1/* in the linux kernel
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
-# source tree.
 
 # Set the blkio controller settings for this service.
 #rc_cgroup_blkio=""
@@ -277,33 +241,10 @@ rc_tty_number=12
 
 # Set this to YES if you want all of the processes in a service's cgroup
 # killed when the service is stopped or restarted.
-# Be aware that setting this to yes means all of a service's
+# This should not be set globally because it kills all of the service's
-# child processes will be killed. Keep this in mind if you set this to
+# child processes, and most of the time this is undesirable. Please set
-# yes here instead of for the individual services in
+# it in /etc/conf.d/<service>.
-# /etc/conf.d/<service>.
 # To perform this cleanup manually for a stopped service, you can
 # execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
 # rc-service <service> cgroup_cleanup.
-# The process followed in this cleanup is the following:
-# 1. send stopsig (sigterm if it isn't set) to all processes left in the
-# cgroup immediately followed by sigcont.
-# 2. Send sighup to all processes in the cgroup if rc_send_sighup is
-# yes.
-# 3. delay for rc_timeout_stopsec seconds.
-# 4. send sigkill to all processes in the cgroup unless disabled by
-# setting rc_send_sigkill to no.
 # rc_cgroup_cleanup="NO"
-
-# If this is yes, we will send sighup to the processes in the cgroup
-# immediately after stopsig and sigcont.
-#rc_send_sighup="NO"
-
-# This is the amount of time in seconds that we delay after sending sigcont
-# and optionally sighup, before we optionally send sigkill to all
-# processes in the # cgroup.
-# The default is 90 seconds.
-#rc_timeout_stopsec="90"
-
-# If this is set to no, we do not send sigkill to all processes in the
-# cgroup.
-#rc_send_sigkill="YES"

guide.md

@@ -53,6 +53,9 @@ Calling `openrc` without any arguments will try to reset all services so
 that the current runlevel is satisfied; if you manually started apache it will be 
 stopped, and if squid died but is in the current runlevel it'll be restarted.
 
+There is a `service` helper that emulates the syntax seen on e.g. older Redhat
+and Ubuntu (`service nginx start` etc.)
+
 # Runlevels
 
 OpenRC has a concept of runlevels, similar to what sysvinit historically 
@@ -195,7 +198,7 @@ script:
 command=
 command_args=
 pidfile=
-```
+``
 
 Thus the 'smallest' service scripts can be half a dozen lines long
 
@@ -238,36 +241,17 @@ messages to a file), and a few others.
 
 # ulimit and CGroups
 
-Setting `ulimit` and `nice` values per service can be done through the
+Setting `ulimit` and `nice` values per service can be done through the `rc_ulimit`
-`rc_ulimit` variable.
+variable.
 
-Under Linux, OpenRC can use cgroups for process management as well. Once
+Under Linux, OpenRC can optionally use CGroups for process management.
-the kernel is configured appropriately, the `rc_cgroup_mode` setting in
+By default each service script's processes are migrated to their own CGroup.
-/etc/rc.conf should be used to control whether cgroups version one,,
-two, or both are used. The default is to use both if they are available.
-
-By changing certain settings in the service's `conf.d` file limits can be
-enforced per service. These settings are documented in detail in the
-default /etc/rc.conf under `LINUX CGROUPS RESOURCE MANAGEMENT`.
-
-# Dealing with Orphaned Processes
-
-It is possible to get into a state where there are orphaned processes
-running which were part of a service. For example, if you are monitoring
-a service with supervise-daemon and supervise-daemon dies for an unknown
-reason. The way to deal with this will be different for each system.
-
-On Linux systems with cgroups enabled, the cgroup_cleanup command is
-added to all services. You can run it manually, when the service is
-stopped, by using:
-
-```
-# rc-service someservice cgroup_cleanup
-```
-
-The `rc_cgroup_cleanup` setting can be changed to yes to make this
-happen automatically when the service is stopped.
 
+By changing certain values in the `conf.d` file limits can be enforced per 
+service. It is easy to find orphan processes of a service that persist after 
+`stop()`, but by default these will NOT be terminated.
+To change this add `rc_cgroup_cleanup="yes"` in the `conf.d` files for services 
+where you desire this functionality.
 
 # Caching
 

init.d.misc/Makefile

@@ -1,11 +1,9 @@
-DIR=	${DATADIR}/support/init.d.examples
+DIR=	${INITDIR}
-INC=	README.md
 SRCS=	avahi-dnsconfd.in avahid.in dhcpcd.in dbus.in \
 	hald.in named.in ntpd.in \
 	openvpn.in polkitd.in sshd.in wpa_supplicant.in
-BIN=	${OBJS}
 
-MK=	../../mk
+MK=	../mk
 
 SED_EXTRA+= -e 's:@VARBASE@:/var:g'
 

init.d/.gitignore

@@ -1,4 +1,3 @@
-agetty
 binfmt
 modules-load
 bootmisc

init.d/Makefile

@@ -19,11 +19,11 @@ SRCS-FreeBSD=	hostid.in modules.in moused.in newsyslog.in pf.in rarpd.in \
 		rc-enabled.in rpcbind.in savecore.in syslogd.in
 # These are FreeBSD specific
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
-		modules-load.in mixer.in nscd.in powerd.in syscons.in
+		modules.in modules-load.in mixer.in nscd.in powerd.in syscons.in
 
-SRCS-Linux=	agetty.in binfmt.in devfs.in dmesg.in hwclock.in consolefont.in \
+SRCS-Linux=	binfmt.in devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
-	keymaps.in killprocs.in modules.in modules-load.in mount-ro.in mtab.in \
+		killprocs.in modules.in modules-load.in mount-ro.in mtab.in numlock.in \
-	numlock.in procfs.in net-online.in sysfs.in termencoding.in
+		procfs.in net-online.in sysfs.in termencoding.in
 
 # Generic BSD scripts
 SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \

init.d/adjkerntz.in

@@ -23,7 +23,6 @@ fi
 
 depend()
 {
-	after swclock
 	provide clock
 	# BSD adjkerntz needs to be able to write to /etc
 	if [ "$clock" = "UTC" -a -e /etc/wall_cmos_clock ] ||

init.d/agetty.in

@@ -1,33 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2017 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="start agetty on a terminal line"
-supervisor=supervise-daemon
-port="${RC_SVCNAME#*.}"
-term_type="${term_type:-linux}"
-command=/sbin/agetty
-command_args_foreground="${agetty_options} ${port} ${baud} ${term_type}"
-pidfile="/run/${RC_SVCNAME}.pid"
-export EINFO_QUIET="${quiet:-yes}"
-
-depend() {
-	after local
-	keyword -prefix
-}
-
-start_pre() {
-	if [ -z "$port" ]; then
-		eerror "${RC_SVCNAME} cannot be started directly. You must create"
-		eerror "symbolic links to it for the ports you want to start"
-		eerror "agetty on and add those to the appropriate runlevels."
-		return 1
-	fi
-}

init.d/binfmt.in

@@ -13,7 +13,7 @@ description="Register misc binary format handlers"
 
 depend()
 {
-	after clock procfs
+	after procfs
 	use modules devfs
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }

init.d/bootmisc.in

@@ -71,8 +71,7 @@ cleanup_var_run_dir()
 	ebegin "Cleaning /var/run"
 	for x in $(find /var/run ! -type d ! -name utmp \
 		! -name random-seed ! -name dev.db \
-		! -name ld-elf.so.hints ! -name ld-elf32.so.hints \
+		! -name ld-elf.so.hints ! -name ld.so.hints);
-		! -name ld.so.hints);
 	do
 		# Clean stale sockets
 		if [ -S "$x" ]; then
@@ -241,7 +240,7 @@ stop()
 {
 	# Write a halt record if we're shutting down
 	if [ "$RC_RUNLEVEL" = shutdown ]; then
-		[ "$RC_UNAME" = Linux ] && openrc-shutdown -w
+		[ "$RC_UNAME" = Linux ] && halt -w
 		if [ "$RC_SYS" = OPENVZ ]; then
 			yesno $RC_REBOOT && printf "" >/reboot
 		fi

init.d/devdb.in

@@ -13,7 +13,6 @@ description="Creates the dev database"
 
 depend()
 {
-	after clock
 	need localmount
 }
 

init.d/dumpon.in

@@ -12,7 +12,6 @@
 description="Configures a specific kernel dump device."
 
 depend() {
-	after clock
 	need swap
 	keyword -jail -prefix
 }

init.d/fsck.in

@@ -15,7 +15,6 @@ _IFS="
 
 depend()
 {
-	after clock
 	use dev clock modules
 	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -timeout -vserver -uml
 }

init.d/hostid.in

@@ -15,7 +15,6 @@ extra_commands="reset"
 depend()
 {
 	use root
-	after clock
 	before devd net
 	keyword -jail -prefix
 }

init.d/hostname.in

@@ -11,9 +11,7 @@
 
 description="Sets the hostname of the machine."
 
-depend()
+depend() {
-{
-	after clock
 	keyword -docker -lxc -prefix -systemd-nspawn
 }
 
@@ -21,12 +19,12 @@ start()
 {
 	local h source x
 	if [ -s @SYSCONFDIR@/hostname ] && [ -r @SYSCONFDIR@/hostname ]; then
-		read h x <@SYSCONFDIR@/hostname
+	read h x <@SYSCONFDIR@/hostname
-		source="from @SYSCONFDIR@/hostname"
+	source=" from @SYSCONFDIR@/hostname"
 	else
 		# HOSTNAME variable used to be defined in caps in conf.d/hostname.
 		# It is also a magic variable in bash.
-		h=${hostname:-${HOSTNAME}} # checkbashisms: false positive (HOSTNAME var)
+		h=${hostname-${HOSTNAME}} # checkbashisms: false positive
 	fi
 	if [ -z "$h" ]; then
 		einfo "Using default system hostname"

init.d/hwclock.in

@@ -33,6 +33,8 @@ depend()
 	want modules
 	if yesno $clock_adjfile; then
 		use root
+	else
+		before *
 	fi
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }

init.d/keymaps.in

@@ -14,7 +14,7 @@ description="Applies a keymap for the consoles."
 depend()
 {
 	need localmount termencoding
-	after bootmisc clock
+	after bootmisc
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 

init.d/killprocs.in

@@ -19,9 +19,9 @@ depend()
 start()
 {
 	ebegin "Terminating remaining processes"
-	kill_all 15 ${killall5_opts}
+	killall5 -15 ${killall5_opts}
 	eend 0
 	ebegin "Killing remaining processes"
-	kill_all 9 ${killall5_opts}
+	killall5 -9 ${killall5_opts}
 	eend 0
 }

init.d/localmount.in

@@ -14,8 +14,8 @@ description="Mounts disks and swap according to /etc/fstab."
 depend()
 {
 	need fsck
-	use lvm modules mtab root
+	use lvm modules mtab
-	after clock lvm modules root
+	after lvm modules
 	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 

init.d/loopback.in

@@ -13,7 +13,6 @@ description="Configures the loopback interface."
 
 depend()
 {
-	after clock
 	keyword -jail -prefix -systemd-nspawn -vserver
 }
 

init.d/mount-ro.in

@@ -13,7 +13,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 
 depend()
 {
-	after killprocs savecache
+	need killprocs savecache
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 

init.d/mtab.in

@@ -13,7 +13,6 @@ description="Update /etc/mtab to match what the kernel knows about"
 
 depend()
 {
-	after clock
 	need root
 	keyword -prefix -systemd-nspawn
 }

init.d/net-online.in

@@ -15,7 +15,6 @@ depend()
 {
 	after modules
 	need sysfs
-	provide network-online
 	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
 }
 
@@ -28,6 +27,19 @@ get_interfaces()
 	done
 }
 
+get_default_gateway()
+{
+	local cmd gateway
+	if command -v ip > /dev/null 2>&1; then
+		cmd="ip route show"
+	else
+		cmd=route
+	fi
+	set -- $($cmd | grep default)
+	[ "$2" != via ] && gateway="$2" || gateway="$3"
+	printf "%s" $gateway
+}
+
 start ()
 {
 	local carriers configured dev gateway ifcount infinite
@@ -54,15 +66,10 @@ start ()
 	: $((timeout -= 1))
  done
  ! $infinite && [ $timeout -eq 0 ] && rc=1
- include_ping_test=${include_ping_test:-${ping_default_gateway}}
+ if [ $rc -eq 0 ] && yesno ${ping_default_gateway:-no}; then
- if [ -n "${ping_default_gateway}" ]; then
+ 	gateway="$(get_default_gateway)"
- ewarn "ping_default_gateway is deprecated, please use include_ping_test"
+ 	if [ -n "$gateway" ] && ! ping -c 1 $gateway > /dev/null 2>&1; then
- fi
+		rc=1
- if [ $rc -eq 0 ] && yesno ${include_ping_test:-no}; then
- 	ping_test_host="${ping_test_host:-google.com}"
- 	if [ -n "$ping_test_host" ]; then
-		ping -c 1 $ping_test_host > /dev/null 2>&1
-		rc=$?
 	fi
  fi
  eend $rc "The network is offline"

init.d/netmount.in

@@ -20,12 +20,10 @@ depend()
 			*) mywant="$mywant nfsclient"; break ;;
 		esac
 	done
-	after root
  	config /etc/fstab
 	want $mywant
 	use afc-client amd openvpn
 	use dns
-	use root
 	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 

init.d/network.in

@@ -18,7 +18,7 @@ __nl="
 depend()
 {
 	need localmount
-	after bootmisc clock
+	after bootmisc
 	if [ -n "$(interfaces)" ]; then
 		provide net
 	fi

init.d/newsyslog.in

@@ -13,7 +13,6 @@ required_files="/etc/newsyslog.conf"
 
 depend()
 {
-	after clock
 	need localmount
 	keyword -prefix
 }

init.d/procfs.in

@@ -13,7 +13,6 @@ description="Mounts misc filesystems in /proc."
 
 depend()
 {
-	after clock
 	use devfs
 	want modules
 	need localmount

init.d/root.in

@@ -13,7 +13,6 @@ description="Mount the root fs read/write"
 
 depend()
 {
-	after clock
 	need fsck
 	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
 }

init.d/savecore.in

@@ -14,7 +14,6 @@ description="Saves a kernel dump."
 depend()
 {
 	need dumpon localmount
-	after clock
 	before encswap
 	keyword -jail -prefix
 }

init.d/staticroute.in

@@ -14,9 +14,9 @@
 description="Configures static routes."
 __nl="
 "
+
 depend()
 {
-	after clock
 	provide net
 	use network
 	keyword -jail -prefix -vserver

init.d/swap-blk.in

@@ -11,7 +11,6 @@
 
 depend()
 {
-	after clock
 	before fsck
 	keyword -jail -prefix
 }

init.d/swap.in

@@ -11,7 +11,6 @@
 
 depend()
 {
-	after clock
 	before localmount
 	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
 }

init.d/swclock.in

@@ -13,6 +13,7 @@ description="Sets the local clock to the mtime of a given file."
 
 depend()
 {
+	before *
 	provide clock
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }

init.d/syscons.in

@@ -10,7 +10,6 @@
 # except according to the terms contained in the LICENSE file.
 
 depend() {
-	after clock
 	need localmount
 	keyword -jail -prefix
 }

init.d/sysctl.in

@@ -11,7 +11,6 @@
 
 depend()
 {
-	after clock
 	before bootmisc logger
 	keyword -prefix -systemd-nspawn -vserver
 }

init.d/sysfs.in

@@ -15,6 +15,7 @@ sysfs_opts=nodev,noexec,nosuid
 
 depend()
 {
+	want modules
 	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
@@ -98,123 +99,59 @@ mount_misc()
 	fi
 
 	# set up kernel support for efivarfs
-	if [ -d /sys/firmware/efi/efivars ] &&
+	# The presence of /sys/firmware/efi indicates that the system was
-		! mountinfo -q /sys/firmware/efi/efivars; then
+	# booted in efi mode.
-		ebegin "Mounting efivarfs filesystem"
+	if [ -d /sys/firmware/efi ]; then
-		mount -n -t efivarfs -o ro \
+		if [ ! -d /sys/firmware/efi/efivars ] &&
-			efivarfs /sys/firmware/efi/efivars 2> /dev/null
+			modprobe -q efivarfs; then
-		eend 0
+			ewarn "The efivarfs module needs to be configured in " \
+				  "@SYSCONFDIR@/conf.d/modules or built in"
+		fi
+		if [ -d /sys/firmware/efi/efivars ] &&
+			! mountinfo -q /sys/firmware/efi/efivars; then
+			if grep -qs efivarfs /proc/filesystems; then
+				ebegin "Mounting efivarfs filesystem"
+				mount -n -t efivarfs -o ${sysfs_opts} \
+					efivarfs /sys/firmware/efi/efivars
+				eend $?
+			fi
+		fi
 	fi
 }
 
-cgroup1_base()
+mount_cgroups()
 {
-	grep -qw cgroup /proc/filesystems || return 0
+	# set up kernel support for cgroups
-	if ! mountinfo -q /sys/fs/cgroup; then
+	if [ -d /sys/fs/cgroup ] && ! mountinfo -q /sys/fs/cgroup; then
-		ebegin "Mounting cgroup filesystem"
+		if grep -qs cgroup /proc/filesystems; then
-		local opts="${sysfs_opts},mode=755,size=${rc_cgroupsize:-10m}"
+			ebegin "Mounting cgroup filesystem"
-		mount -n -t tmpfs -o "${opts}" cgroup_root /sys/fs/cgroup
+			local opts="${sysfs_opts},mode=755,size=${rc_cgroupsize:-10m}"
-		eend $?
+			mount -n -t tmpfs -o ${opts} cgroup_root /sys/fs/cgroup
+			eend $?
+		fi
 	fi
 
+	mountinfo -q /sys/fs/cgroup || return 0
+
 	if ! mountinfo -q /sys/fs/cgroup/openrc; then
-		local agent="${RC_LIBEXECDIR}/sh/cgroup-release-agent.sh"
+		local agent="@LIBEXECDIR@/sh/cgroup-release-agent.sh"
 		mkdir /sys/fs/cgroup/openrc
 		mount -n -t cgroup \
 			-o none,${sysfs_opts},name=openrc,release_agent="$agent" \
 			openrc /sys/fs/cgroup/openrc
 		printf 1 > /sys/fs/cgroup/openrc/notify_on_release
 	fi
-	return 0
-}
 
-cgroup1_controllers()
+	yesno ${rc_controller_cgroups:-YES} && [ -e /proc/cgroups ] || return 0
-{
+	while read name hier groups enabled rest; do
-	yesno "${rc_controller_cgroups:-YES}" && [ -e /proc/cgroups ] || return 0
-	while read -r name _ _ enabled rest; do
 		case "${enabled}" in
-			1)	mountinfo -q "/sys/fs/cgroup/${name}" && continue
+			1)	mountinfo -q /sys/fs/cgroup/${name} && continue
-				local x
+				mkdir /sys/fs/cgroup/${name}
-				for x in $rc_cgroup_controllers; do
+				mount -n -t cgroup -o ${sysfs_opts},${name} \
-				[ "${name}" = "blkio" ] && [ "${x}" = "io" ] &&
+					${name} /sys/fs/cgroup/${name}
-					continue 2
-				[ "${name}" = "${x}" ] &&
-				continue 2
-				done
-				mkdir "/sys/fs/cgroup/${name}"
-				mount -n -t cgroup -o "${sysfs_opts},${name}" \
-					"${name}" "/sys/fs/cgroup/${name}"
 				;;
 		esac
 	done < /proc/cgroups
-	return 0
-}
-
-cgroup2_base()
-{
-	local base
-	base="$(cgroup2_find_path)"
-	mkdir -p "${base}"
-	mount -t cgroup2 none -o "${sysfs_opts},nsdelegate" "${base}" 2> /dev/null ||
-		mount -t cgroup2 none -o "${sysfs_opts}" "${base}"
-	return 0
-}
-
-cgroup2_controllers()
-{
-	local active cgroup_path x y
-	cgroup_path="$(cgroup2_find_path)"
-	[ -z "${cgroup_path}" ] && return 0
-	[ -e "${cgroup_path}/cgroup.controllers" ] &&
-	read -r active < "${cgroup_path}/cgroup.controllers"
-	for x in ${rc_cgroup_controllers}; do
-		for y in ${active}; do
-		[ "$x" = "$y" ] &&
-			[ -e "${cgroup_path}/cgroup.subtree_control" ]&&
-			echo "+${x}"  > "${cgroup_path}/cgroup.subtree_control"
-		done
-	done
-	return 0
-}
-
-cgroups_hybrid()
-{
-	grep -qw cgroup /proc/filesystems || return 0
-	cgroup1_base
-	if grep -qw cgroup2 /proc/filesystems; then
-		cgroup2_base
-		cgroup2_controllers
-	fi
-	cgroup1_controllers
-	return 0
-}
-
-cgroups_legacy()
-{
-	grep -qw cgroup /proc/filesystems || return 0
-	cgroup1_base
-	cgroup1_controllers
-	return 0
-}
-
-cgroups_unified()
-{
-	cgroup2_base
-	cgroup2_controllers
-	return 0
-}
-
-mount_cgroups()
-{
-	# set up kernel support for cgroups
-	if [ -d /sys/fs/cgroup ]; then
-		case "${rc_cgroup_mode:-hybrid}" in
-		hybrid) cgroups_hybrid ;;
-		legacy) cgroups_legacy ;;
-		unified) cgroups_unified ;;
-		esac
-	fi
-	return 0
 }
 
 restorecon_sys()

init.d/syslogd.in

@@ -22,6 +22,6 @@ depend()
 	provide logger
 	use net newsyslog
 	need localmount
-	after bootmisc clock
+	after bootmisc
 	keyword -prefix
 }

init.d/termencoding.in

@@ -18,7 +18,7 @@ depend()
 {
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 	use root
-	after bootmisc clock
+	after bootmisc
 }
 
 start()

init.d/ttys.in

@@ -11,7 +11,7 @@
 
 depend()
 {
-	after clock fsck
+	after fsck
 	keyword -prefix
 }
 

init.d/urandom.in

@@ -14,7 +14,6 @@ description="Initializes the random number generator."
 
 depend()
 {
-	after clock
 	need localmount
 	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn
 }

init.d/wscons.in

@@ -11,7 +11,6 @@
 
 depend()
 {
-	after clock
 	need localmount
 	keyword -prefix
 }

man/Makefile

@@ -6,10 +6,10 @@ MAN3=		einfo.3 \
 		rc_config.3 rc_deptree.3 rc_find_pids.3 rc_plugin_hook.3 \
 		rc_runlevel.3 rc_service.3 rc_stringlist.3
 MAN8=		rc-service.8 rc-status.8 rc-update.8 openrc.8 openrc-run.8 \
-		start-stop-daemon.8 supervise-daemon.8
+		service.8 start-stop-daemon.8 supervise-daemon.8
 
 ifeq (${OS},Linux)
-MAN8 += rc-sstat.8 openrc-init.8 openrc-shutdown.8
+MAN8 += rc-sstat.8
 endif
 
 # Handy macro to create symlinks

man/openrc-init.8

@@ -1,46 +0,0 @@
-.\" Copyright (c) 2017 The OpenRC Authors.
-.\" See the Authors file at the top-level directory of this distribution and
-.\" https://github.com/OpenRC/openrc/blob/master/AUTHORS
-.\"
-.\" This file is part of OpenRC. It is subject to the license terms in
-.\" the LICENSE file found in the top-level directory of this
-.\" distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-.\" This file may not be copied, modified, propagated, or distributed
-.\"    except according to the terms contained in the LICENSE file.
-.\"
-.Dd April 6, 2017
-.Dt openrc-init 8 SMM
-.Os OpenRC
-.Sh NAME
-.Nm openrc-init
-.Nd the parent of all processes
-.Sh SYNOPSIS
-.Nm
-.Sh DESCRIPTION
-.Nm
-is an init process which can be an alternative to sysvinit or any other
-init process.
-.Pp
-To use
-.Nm
-configure your boot loader to invoke it or symlink it to /sbin/init.
-Also, you will need to use
-.Xr openrc-shutdown 8 ,
-to halt, reboot or poweroff the system.
-.Pp
-The default runlevel is read from the init command line, the
-rc_default_runlevel setting in rc.conf, the kernel command line, or it is
-assumed to be "default" if it is not set in any of these places.
-.Pp
-.Nm
-doesn't manage getty's directly, so you will need to manage them another
-way. For example, you can use the agetty service script as described in
-agetty-guide.md in this distribution.
-.Sh BUGS
-This was first released as part of OpenRC 0.25.
-I do not know of any specific issues. However, since this is the first
-release of openrc-init, please test and report any issues you find.
-.Sh SEE ALSO
-.Xr openrc-shutdown 8 ,
-.Sh AUTHORS
-.An William Hubbs <w.d.hubbs@gmail.com>

man/openrc-run.8

@@ -111,12 +111,9 @@ The path to the s6 service directory if you are monitoring this service
 with S6. The default is /var/svc.d/${RC_SVCNAME}.
 .It Ar s6_svwait_options_start
 The options to pass to s6-svwait when starting the service via s6.
-.It Ar s6_force_kill
-Should we force-kill this service if s6_service_timeout_stop expires
-but the service doesn't go down during shutdown? The default is yes.
 .It Ar s6_service_timeout_stop
 The amount of time, in milliseconds, s6-svc should wait for the service
-to go down when stopping the service. The default is 60000.
+to go down when stopping the service. The default is 10000.
 .It Ar start_stop_daemon_args
 List of arguments passed to start-stop-daemon when starting the daemon.
 .It Ar command
@@ -170,24 +167,6 @@ Display name used for the above defined command.
 Process name to match when signaling the daemon.
 .It Ar stopsig
 Signal to send when stopping the daemon.
-.It Ar respawn_delay
-Respawn delay
-.Xr supervise-daemon 8
-will use for this daemon.  See
-.Xr supervise-daemon 8
-for more information about this setting.
-.It Ar respawn_max
-Respawn max
-.Xr supervise-daemon 8
-will use for this daemon.  See
-.Xr supervise-daemon 8
-for more information about this setting.
-.It Ar respawn_period
-Respawn period
-.Xr supervise-daemon 8
-will use for this daemon.  See
-.Xr supervise-daemon 8
-for more information about this setting.
 .It Ar retry
 Retry schedule to use when stopping the daemon. It can either be a
 timeout in seconds or multiple signal/timeout pairs (like SIGTERM/5).
@@ -220,10 +199,8 @@ that dependency type to the function, or prefix the names with ! to
 remove them from the dependencies.
 .Bl -tag -width "RC_DEFAULTLEVEL"
 .It Ic need
-The service will attempt to start any services it needs regardless of
+The service will refuse to start until needed services have started and it
-whether they have been added to the runlevel. It will refuse to start
+will refuse to stop until any services that need it have stopped.
-until all services it needs have started, and it will refuse to stop until all
-services that need it have stopped.
 .It Ic use
 The service will attempt to start any services it uses that have been added
 to the runlevel.
@@ -289,18 +266,6 @@ system.
 To see how to influence dependencies in configuration files, see the
 .Sx FILES
 section below.
-.Sh _pre AND _post FUNCTIONS
-Any command defined in extra_commands, extra_started_commands or
-extra_stopped_commands can have _pre and _post functions in the service
-script. If the command function is called foo, the_pre and _post
-functions for it should be called foo_pre and foo_post.
-.Pp
-These functions should be used to perform preparation before the
-command is run and cleanup after the command completes. In order for
-.Nm
-to record the command as being run successfully, the _pre
-function, command function itself and the _post function should all exit
-with a zero return code.
 .Sh BUILTINS
 .Nm
 defines some builtin functions that you can use inside your service scripts:
@@ -429,63 +394,27 @@ If -d, -f or -p is specified, checkpath checks to see if the path
 exists, is the right type and has the correct owner and access modes. If
 any of these tests fail, the path is created and set up as specified. If
 more than one of -d, -f or -p are specified, the last one will be used.
-.Pp
+
 The argument to -m is a three or four digit octal number. If this option
 is not provided, the value defaults to 0644 for files and 0775 for
 directories.
-.Pp
+
 The argument to -o is a representation of the user and/or group which
 should own the path. The user and group can be represented numerically
 or with names, and are separated by a colon.
-.Pp
+
 The truncate options (-D and -F) cause the directory or file to be
 cleared of all contents.
-.Pp
+
 If -W is specified, checkpath checks to see if the first path given on
 the command line is writable.  This is different from how the test
 command in the shell works, because it also checks to make sure the file
 system is not read only.
-.Pp
+
 Also, the -d, -f or -p options should not be specified along with this option.
-.Pp
+
 The -q option suppresses all informational output. If it is specified
 twice, all error messages are suppressed as well.
-.Ic fstabinfo
-.Op Fl M , -mount
-.Op Fl R , -remount
-.Op Fl b , -blockdevice
-.Op Fl m , -mountargs
-.Op Fl o , -options
-.Op Fl p , -passno Ar passno
-.Op Fl t , -type Ar fstype
-.Ar path
-.Xc
-If -b, -m, -o, -p or -t is specified,the appropriate information is
-extracted from fstab. If -M or -R are given, file systems are mounted or
-remounted.
-.Pp
-The -q option suppresses all informational output. If it is specified
-twice, all error messages are suppressed as well.
-.Ic mountinfo
-.Op Fl f, -fstype-regex Ar regex
-.Op Fl F, -skip-fstype-regex Ar regex
-.Op Fl n, -node-regex Ar regex
-.Op Fl N, -skip-node-regex Ar regex
-.Op Fl o, -options-regex Ar regex
-.Op Fl O, -skip-options-regex Ar regex
-.Op Fl p, -point-regex Ar regex
-.Op Fl P, -skip-point-regex Ar regex
-.Op Fl e, -netdev
-.Op Fl E, -nonetdev
-.Op Fl i, -options
-.Op Fl s, -fstype
-.Op Fl t, -node
-  .Ar mount1 mount2 ...
-.Xc
-The f, F, n, N, o, O, p, P, e and E options specify what you want to
-search for or skip in the mounted file systems. The i, s and t options
-specify what you want to display. If no mount points are given, all
-mount points will be considered.
 .It Ic yesno Ar value
 If
 .Ar value

man/openrc-shutdown.8

@@ -1,62 +0,0 @@
-.\" Copyright (c) 2017 The OpenRC Authors.
-.\" See the Authors file at the top-level directory of this distribution and
-.\" https://github.com/OpenRC/openrc/blob/master/AUTHORS
-.\"
-.\" This file is part of OpenRC. It is subject to the license terms in
-.\" the LICENSE file found in the top-level directory of this
-.\" distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-.\" This file may not be copied, modified, propagated, or distributed
-.\"    except according to the terms contained in the LICENSE file.
-.\"
-.Dd May 22, 2017
-.Dt openrc-shutdown 8 SMM
-.Os OpenRC
-.Sh NAME
-.Nm openrc-shutdown
-.Nd bring the system down
-.Sh SYNOPSIS
-.Nm
-.Op Fl d , -no-write
-.Op Fl D , -dry-run
-.Op Fl H , -halt
-.Op Fl k , -kexec
-.Op Fl p , -poweroff
-.Op Fl R , -reexec
-.Op Fl r , -reboot
-.Op Fl s , -single
-.Op Fl w , -write-only
-.Sh DESCRIPTION
-.Nm
-is the utility that communicates with
-.Xr openrc-init 8
-to bring down the system or instruct openrc-init to re-execute itself.
-It supports the following options:
-.Bl -tag -width "poweroff"
-.It Fl d , -no-write
-Do not write the wtmp boot record.
-.It Fl D , -dry-run
-Print the action that would be taken without executing it. This is to
-allow testing.
-.It Fl H , -halt
-Stop all services, kill all remaining processes and halt the system.
-.It Fl k , -kexec
-Stop all services, kill all processes and boot directly into a new
-kernel loaded via
-.Xr kexec 8 .
-.It Fl p , -poweroff
-Stop all services, kill all processes and power off the system.
-.It Fl R , -reexec
-instruct openrc-init to re-exec itself. This should be used after an
-upgrade of OpenRC if you are using openrc-init as your init process.
-.It Fl r , -reboot
-Stop all services, kill all processes and reboot the system.
-.It Fl s , -single
-Stop all services, kill all processes and move to single user mode.
-.It Fl w , -write-only
-Stop all services, kill all processes and move to single user mode.
-.El
-.Sh SEE ALSO
-.Xr openrc-init 8 ,
-.Xr kexec 8 ,
-.Sh AUTHORS
-.An William Hubbs <w.d.hubbs@gmail.com>

man/rc-status.8

@@ -25,12 +25,6 @@ in different runlevels.  The default behavior is to show information
 about the current runlevel and any unassigned services that are not stopped,
 but any runlevel can be quickly examined.
 .Pp
-If an active service is being supervised by
-.Xr supervise-daemon 8, 
-the amount of time the daemon has been active along with the number of
-times it has been respawned in the current respawn period will be
-displayed.
-.Pp
 The options are as follows:
 .Bl -tag -width ".Fl test , test string"
 .It Fl a , -all
@@ -63,6 +57,5 @@ dependency order if the dependency tree is available.
 .Sh SEE ALSO
 .Xr openrc 8 ,
 .Xr rc-update 8
-.Xr supervise-daemon 8
 .Sh AUTHORS
 .An Roy Marples <roy@marples.name>

man/service.8

@@ -0,0 +1 @@
+.so rc-service.8

man/supervise-daemon.8

@@ -16,8 +16,6 @@
 .Nd starts a daemon and restarts it if it crashes
 .Sh SYNOPSIS
 .Nm
-.Fl D , -respawn-delay
-.Ar seconds
 .Fl d , -chdir
 .Ar path
 .Fl e , -env
@@ -28,20 +26,14 @@
 .Ar arg
 .Fl k , -umask
 .Ar value
-.Fl m , -respawn-max
-.Ar count
 .Fl N , -nicelevel
 .Ar level
 .Fl p , -pidfile
 .Ar pidfile
-.Fl P , -respawn-period
-.Ar seconds
-.Fl R , -retry
-.Ar arg
-.Fl r , -chroot
-.Ar chrootpath
 .Fl u , -user
 .Ar user
+.Fl r , -chroot
+.Ar chrootpath
 .Fl 1 , -stdout
 .Ar logfile
 .Fl 2 , -stderr
@@ -90,9 +82,6 @@ Print the action(s) that are taken just before doing them.
 .Pp
 The options are as follows:
 .Bl -tag -width indent
-.It Fl D , -respawn-delay Ar seconds
-wait this number of seconds before restarting a daemon after it crashes.
-The default is 0.
 .It Fl d , -chdir Ar path
 chdir to this directory before starting the daemon.
 .It Fl e , -env Ar VAR=VALUE
@@ -105,21 +94,8 @@ Class can be 0 for none, 1 for real time, 2 for best effort and 3 for idle.
 Data can be from 0 to 7 inclusive.
 .It Fl k , -umask Ar mode
 Set the umask of the daemon.
-.It Fl m , -respawn-max Ar count
-Sets the maximum number of times a daemon will be respawned during a
-respawn period. If a daemon dies more than this number of times during a
-respawn period,
-.Nm
-will give up trying to respawn it and exit. The default is 10, and 0
-means unlimited.
 .It Fl N , -nicelevel Ar level
 Modifies the scheduling priority of the daemon.
-.It Fl P , -respawn-period Ar seconds
-Sets the length of a respawn period. The default is 10 seconds. See the
-description of --respawn-max for more information.
-.It Fl R , -retry Ar timeout | Ar signal Ns / Ns Ar timeout
-The retry specification can be either a timeout in seconds or multiple
-signal/timeout pairs (like SIGTERM/5).
 .It Fl r , -chroot Ar path
 chroot to this directory before starting the daemon. All other paths, such
 as the path to the daemon, chdir and pidfile, should be relative to the chroot.
@@ -135,7 +111,6 @@ The same thing as
 .Fl 1 , -stdout
 but with the standard error output.
 .El
-.El
 .Sh ENVIRONMENT
 .Va SSD_NICELEVEL
 can also set the scheduling priority of the daemon, but the command line
@@ -148,15 +123,6 @@ to parse its options, which allows it to accept the `--' option which will
 cause it to stop processing options at that point. Any subsequent arguments
 are passed as arguments to the daemon to start and used when finding a daemon
 to stop or signal.
-.Sh NOTE
-If respawn-delay, respawn-max and respawn-period are not set correctly,
-it is possible to trigger a situation in which the supervisor will
-infinitely try to respawn a daemon. To avoid this, if you change the
-values of --respawn-delay, --respawn-max or --respawn-period, always
-make sure the settings mmake sense. For example, a respawn period of 5
-seconds with a respawn max of 10 and a respawn delay of 1 second leads
-to infinite respawning since there can never be 10 respawns within 5
-seconds.
 .Sh SEE ALSO
 .Xr chdir 2 ,
 .Xr chroot 2 ,

mk/cc.mk

@@ -26,8 +26,7 @@ _CCFLAGS=	-Wall -Wextra -Wimplicit -Wshadow -Wformat=2 \
 		-Wnested-externs \
 		-Winline -Wwrite-strings -Wcast-align -Wcast-qual \
 		-Wpointer-arith \
-		-Wdeclaration-after-statement -Wsequence-point \
+		-Wdeclaration-after-statement -Wsequence-point
-		-Werror=implicit-function-declaration
 
 # We should be using -Wredundant-decls, but our library hidden proto stuff
 # gives loads of warnings. I don't fully understand it (the hidden proto,

mk/os-GNU.mk

@@ -11,5 +11,5 @@
 SFX=		.GNU.in
 PKG_PREFIX?=	/usr
 
-CPPFLAGS+=	-D_DEFAULT_SOURCE -D_XOPEN_SOURCE=700 -DMAXPATHLEN=4096 -DPATH_MAX=4096
+CPPFLAGS+=	-D_BSD_SOURCE -D_XOPEN_SOURCE=700 -DMAXPATHLEN=4096 -DPATH_MAX=4096
 LIBDL=		-Wl,-Bdynamic -ldl

mk/os-Linux.mk

@@ -11,7 +11,7 @@
 SFX=		.Linux.in
 PKG_PREFIX?=	/usr
 
-CPPFLAGS+=	-D_DEFAULT_SOURCE -D_XOPEN_SOURCE=700
+CPPFLAGS+=	-D_BSD_SOURCE -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=700
 LIBDL=		-Wl,-Bdynamic -ldl
 
 ifeq (${MKSELINUX},yes)

mk/sys.mk

@@ -59,9 +59,6 @@ MANPREFIX?=		${UPREFIX}/share
 MANDIR?=		${MANPREFIX}/man
 MANMODE?=		0444
 
-DATADIR?=		${UPREFIX}/share/openrc
-DATAMODE?=		0644
-
 DOCDIR?=		${UPREFIX}/share/doc
 DOCMODE?=		0644
 

s6-guide.md

@@ -39,10 +39,6 @@ s6_service_path - the path to the s6 service directory. The default is
 s6_svwait_options_start - the options to pass to s6-svwait when starting
 the service. If this is not set, s6-svwait will not be called.
 
-s6_force_kill - Should we try to force kill this service if the
-s6_service_timeout_stop timeout expires when shutting down this service?
-The default is yes.
-
 s6_service_timeout_stop - the amount of time, in milliseconds, s6-svc
 should wait for a service to go down when stopping.
 

scripts/.gitignore

@@ -1,5 +1 @@
-halt
-poweroff
 rc-sstat
-reboot
-shutdown

scripts/Makefile

@@ -8,23 +8,12 @@ INSTALLAFTER = _installafter
 ifeq (${OS},Linux)
 SRCS+= rc-sstat.in
 BIN+=	rc-sstat
-ifeq (${MKSYSVINIT},yes)
-SRCS+= halt.in poweroff.in reboot.in shutdown.in
-BIN+=	halt poweroff reboot shutdown
-	endif
 endif
 
 _installafter:
 ifeq (${OS},Linux)
 	${INSTALL} -d ${DESTDIR}${SBINDIR}
-	ln -sf ${DIR}/rc-sstat ${DESTDIR}/${SBINDIR}/rc-sstat
+	ln -s ${DIR}/rc-sstat ${DESTDIR}/${SBINDIR}/rc-sstat
-ifeq (${MKSYSVINIT},yes)
-	ln -sf	${DIR}/halt ${DESTDIR}/${SBINDIR}/halt
-	ln -sf	${DIR}/poweroff ${DESTDIR}/${SBINDIR}/poweroff
-	ln -sf	${DIR}/reboot ${DESTDIR}/${SBINDIR}/reboot
-	ln -sf	${DIR}/shutdown ${DESTDIR}/${SBINDIR}/shutdown
-	ln -sf	openrc-init ${DESTDIR}/${SBINDIR}/init
-endif
 endif
 
 include ${MK}/scripts.mk

scripts/halt.in

@@ -1,24 +0,0 @@
-#!@SHELL@
-
-option_arg=
-poweroff_arg=
-while getopts :nwdfiph opt; do
-	case "$opt" in
-		n) ;;
-		w) poweroff_arg=--write-only ;;
-		d) option_arg=--no-write ;;
-		f) ;;
-		i) ;;
-		p) poweroff_arg=--poweroff ;;
-		[?]) printf "%s\n" "${0##*/}: invalid command line option" >&2
-		exit 1
-		;;
-	esac
-done
-shift $((OPTIND-1))
-
-if [ -z "${poweroff_arg}" ]; then
-	poweroff_arg=--poweroff
-fi
-
-exec @SBINDIR@/openrc-shutdown ${option_arg} ${poweroff_arg} "$@"

scripts/poweroff.in

@@ -1,23 +0,0 @@
-#!@SHELL@
-
-option_arg=
-poweroff_arg=
-while getopts :nwdfiph opt; do
-	case "$opt" in
-		n) ;;
-		w) poweroff_arg=--write-only ;;
-		d) option_arg=--no-write ;;
-		f) ;;
-		i) ;;
-		[?]) printf "%s\n" "${0##*/}: invalid command line option" >&2
-		exit 1
-		;;
-	esac
-done
-shift $((OPTIND-1))
-
-if [ -z "${poweroff_arg}" ]; then
-	poweroff_arg=--poweroff
-fi
-
-exec @SBINDIR@/openrc-shutdown ${option_arg} ${poweroff_arg} "$@"

scripts/reboot.in

@@ -1,25 +0,0 @@
-#!@SHELL@
-
-option_arg=
-poweroff_arg=
-while getopts :nwdfhik opt; do
-	case "$opt" in
-		n) ;;
-		w) poweroff_arg=--write-only ;;
-		d) option_arg=--no-write ;;
-		f) ;;
-		h) ;;
-		i) ;;
-		k) poweroff_arg=--kexec ;;
-		[?]) printf "%s\n" "${0##*/}: invalid command line option" >&2
-		exit 1
-		;;
-	esac
-done
-shift $((OPTIND-1))
-
-if [ -z "${poweroff_arg}" ]; then
-	poweroff_arg=--reboot
-fi
-
-exec @SBINDIR@/openrc-shutdown ${option_arg} ${poweroff_arg} "$@"

scripts/shutdown.in

@@ -1,29 +0,0 @@
-#!@SHELL@
-
-shutdown_arg=
-while getopts :akrhPHfFnct: opt; do
-	case "$opt" in
-		a) ;;
-		k) ;;
-		r) shutdown_arg=--reboot ;;
-		h) shutdown_arg=--halt ;;
-		P) shutdown_arg=--poweroff ;;
-		H) shutdown_arg=--halt ;;
-		f) ;;
-		F) ;;
-		n) ;;
-		c) ;;
-		t) ;;
-		[?]) printf "%s\n" "${0##*/}: invalid command line option" >&2
-		exit 1
-		;;
-	esac
-done
-shift $((OPTIND-1))
-
-if [ -z "${shutdown_arg}" ]; then
-	shutdown_arg=--single
-fi
-
-echo @SBINDIR@/openrc-shutdown ${shutdown_arg} "$@"
-exec @SBINDIR@/openrc-shutdown ${shutdown_arg} "$@"

sh/gendepends.sh.in

@@ -74,22 +74,11 @@ do
 
 		# Only generate dependencies for OpenRC scripts
 		read one two three <"$RC_SERVICE"
-		case "$one" in
+		[ "$one" = "#!@SBINDIR@/runscript" ] || \
-			\#*/openrc-run) ;;
+		[ "$one" = "#!@SBINDIR@/openrc-run" ] || \
-			\#*/runscript) ;;
+		[ "$one" = "#!" -a "$two" = "@SBINDIR@/runscript" ] || \
-			\#!)
+		[ "$one" = "#!" -a "$two" = "@SBINDIR@/openrc-run" ] || \
-				case "$two" in
+			continue
-					*/openrc-run) ;;
-					*/runscript) ;;
-					*)
-						continue
-						;;
-				esac
-				;;
-			*)
-				continue
-				;;
-		esac
 		unset one two three
 
 		RC_SVCNAME=${RC_SERVICE##*/} ; export RC_SVCNAME

sh/openrc-run.sh.in

@@ -243,9 +243,6 @@ sourcex "@LIBEXECDIR@/sh/s6.sh"
 sourcex "@LIBEXECDIR@/sh/start-stop-daemon.sh"
 sourcex "@LIBEXECDIR@/sh/supervise-daemon.sh"
 
-# Load our script
-sourcex "$RC_SERVICE"
-
 # Set verbose mode
 if yesno "${rc_verbose:-$RC_VERBOSE}"; then
 	EINFO_VERBOSE=yes
@@ -258,7 +255,8 @@ for _cmd; do
 		[ -n "${rc_ulimit:-$RC_ULIMIT}" ] && \
 			ulimit ${rc_ulimit:-$RC_ULIMIT}
 		# Apply cgroups settings if defined
-		if [ "$(command -v cgroup_add_service)" = "cgroup_add_service" ]
+		if [ "$(command -v cgroup_add_service)" = \
+		    "cgroup_add_service" ]
 		then
 			if [ -d /sys/fs/cgroup -a ! -w /sys/fs/cgroup ]; then
 				eerror "No permission to apply cgroup settings"
@@ -267,15 +265,16 @@ for _cmd; do
 			cgroup_add_service /sys/fs/cgroup/openrc
 			cgroup_add_service /sys/fs/cgroup/systemd/system
 		fi
-		[ "$(command -v cgroup_set_limits)" = "cgroup_set_limits" ] &&
+		[ "$(command -v cgroup_set_limits)" = \
-			cgroup_set_limits
+		    "cgroup_set_limits" ] && \
-		[ "$(command -v cgroup2_set_limits)" = "cgroup2_set_limits" ] &&
+		    cgroup_set_limits
-			[ "$_cmd" = start ] &&
-			cgroup2_set_limits
 		break
 	fi
 done
 
+# Load our script
+sourcex "$RC_SERVICE"
+
 eval "printf '%s\n' $required_dirs" | while read _d; do
 	if [ -n "$_d" ] && [ ! -d "$_d" ]; then
 		eerror "$RC_SVCNAME: \`$_d' is not a directory"
@@ -365,14 +364,10 @@ while [ -n "$1" ]; do
 				then
 					"$1"_post || exit $?
 				fi
-				[ "$(command -v cgroup_cleanup)" = "cgroup_cleanup" ] &&
+				[ "$(command -v cgroup_cleanup)" = "cgroup_cleanup" -a \
-					[ "$1" = "stop" ] &&
+				"$1" = "stop" ] && \
-					yesno "${rc_cgroup_cleanup}" && \
+				yesno "${rc_cgroup_cleanup}" && \
 					cgroup_cleanup
-				if [ "$(command -v cgroup2_remove)" = "cgroup2_remove" ]; then
-					[ "$1" = stop ] || [ -z "${command}" ] &&
-					cgroup2_remove
-				fi
 				shift
 				continue 2
 			else

sh/rc-cgroup.sh.in

@@ -14,56 +14,46 @@ description_cgroup_cleanup="Kill all processes in the cgroup"
 
 cgroup_find_path()
 {
-	local OIFS name dir result
+	local OIFS n name dir result
 	[ -n "$1" ] || return 0
 	OIFS="$IFS"
 	IFS=":"
-	while read -r _ name dir; do
+	while read n name dir; do
 		[ "$name" = "$1" ] && result="$dir"
 	done < /proc/1/cgroup
 	IFS="$OIFS"
-	printf "%s" "${result}"
+	echo $result
 }
 
 cgroup_get_pids()
 {
-	local cgroup_procs p pids
+	local p
-	cgroup_procs="$(cgroup2_find_path)"
+	pids=
-	[ -n "${cgroup_procs}" ] &&
+	while read p; do
-		cgroup_procs="${cgroup_procs}/${RC_SVCNAME}/cgroup.procs" ||
+		[ $p -eq $$ ] || pids="${pids} ${p}"
-		cgroup_procs="/sys/fs/cgroup/openrc/${RC_SVCNAME}/tasks"
+	done < /sys/fs/cgroup/openrc/${RC_SVCNAME}/tasks
-	[ -f "${cgroup_procs}" ] || return 0
+	[ -n "$pids" ]
-	while read -r p; do
-		[ "$p" -eq $$ ] || pids="${pids} ${p}"
-	done < "${cgroup_procs}"
-	printf "%s" "${pids}"
-	return 0
 }
 
 cgroup_running()
 {
-	[ -d "/sys/fs/cgroup/unified/${RC_SVCNAME}" ] ||
+	[ -d "/sys/fs/cgroup/openrc/${RC_SVCNAME}" ]
-			[ -d "/sys/fs/cgroup/${RC_SVCNAME}" ] ||
-			[ -d "/sys/fs/cgroup/openrc/${RC_SVCNAME}" ]
 }
 
 cgroup_set_values()
 {
-	[ -n "$1" ] && [ -n "$2" ] && [ -d "/sys/fs/cgroup/$1" ] || return 0
+	[ -n "$1" -a -n "$2" -a -d "/sys/fs/cgroup/$1" ] || return 0
 
-	local controller h
+	local controller="$1" h=$(cgroup_find_path "$1")
-	controller="$1"
-	h=$(cgroup_find_path "$1")
 	cgroup="/sys/fs/cgroup/${1}${h}openrc_${RC_SVCNAME}"
 	[ -d "$cgroup" ] || mkdir -p "$cgroup"
 
 	set -- $2
 	local name val
-	while [ -n "$1" ] && [ "$controller" != "cpuacct" ]; do
+	while [ -n "$1" -a "$controller" != "cpuacct" ]; do
 		case "$1" in
 			$controller.*)
-				if [ -n "${name}" ] && [ -w "${cgroup}/${name}" ] && 
+				if [ -n "$name" -a -w "$cgroup/$name" -a -n "$val" ]; then
-					[ -n "${val}" ]; then
 					veinfo "$RC_SVCNAME: Setting $cgroup/$name to $val"
 					printf "%s" "$val" > "$cgroup/$name"
 				fi
@@ -78,7 +68,7 @@ cgroup_set_values()
 		esac
 		shift
 	done
-	if [ -n "${name}" ] && [ -w "${cgroup}/${name}" ] && [ -n "${val}" ]; then
+	if [ -n "$name" -a -w "$cgroup/$name" -a -n "$val" ]; then
 		veinfo "$RC_SVCNAME: Setting $cgroup/$name to $val"
 		printf "%s" "$val" > "$cgroup/$name"
 	fi
@@ -144,84 +134,21 @@ cgroup_set_limits()
 	return 0
 }
 
-cgroup2_find_path()
-{
-	if grep -qw cgroup2 /proc/filesystems; then
-		case "${rc_cgroup_mode:-hybrid}" in
-			hybrid) printf "/sys/fs/cgroup/unified" ;;
-			unified) printf "/sys/fs/cgroup" ;;
-		esac
-	fi
-		return 0
-}
-
-cgroup2_remove()
-{
-	local cgroup_path rc_cgroup_path
-	cgroup_path="$(cgroup2_find_path)"
-	[ -z "${cgroup_path}" ] && return 0
-	rc_cgroup_path="${cgroup_path}/${RC_SVCNAME}"
-	[ ! -d "${rc_cgroup_path}" ] ||
-		[ ! -e "${rc_cgroup_path}"/cgroup.events ] &&
-		return 0
-	grep -qx "$$" "${rc_cgroup_path}/cgroup.procs" &&
-		printf "%d" 0 > "${cgroup_path}/cgroup.procs"
-	local key populated vvalue
-	while read -r key value; do
-		case "${key}" in
-			populated) populated=${value} ;;
-			*) ;;
-		esac
-	done < "${rc_cgroup_path}/cgroup.events"
-	[ "${populated}" = 1 ] && return 0
-	rmdir "${rc_cgroup_path}"
-	return 0
-}
-
-cgroup2_set_limits()
-{
-	local cgroup_path
-	cgroup_path="$(cgroup2_find_path)"
-	[ -d "${cgroup_path}" ] || return 0
-	rc_cgroup_path="${cgroup_path}/${RC_SVCNAME}"
-	local OIFS="$IFS"
-	IFS="
-"
-	[ ! -d "${rc_cgroup_path}" ] && mkdir "${rc_cgroup_path}"
-	printf "%d" 0 > "${rc_cgroup_path}/cgroup.procs"
-	echo "${rc_cgroup_settings}" | while IFS="$OIFS" read -r key value; do
-		[ -z "${key}" ] || [ -z "${value}" ] && continue
-		[ ! -e "${rc_cgroup_path}/${key}" ] && continue
-		veinfo "${RC_SVCNAME}: cgroups: ${key} ${value}"
-		printf "%s" "${value}" > "${rc_cgroup_path}/${key}"
-	done
-	IFS="$OIFS"
-	return 0
-}
-
 cgroup_cleanup()
 {
 	cgroup_running || return 0
 	ebegin "starting cgroups cleanup"
-	local pids loops=0
+	for sig in TERM QUIT INT; do
-	pids="$(cgroup_get_pids)"
+		cgroup_get_pids || { eend 0 "finished" ; return 0 ; }
-	if [ -n "${pids}" ]; then
+		for i in 0 1; do
-		kill -s CONT ${pids} 2> /dev/null
+			kill -s $sig $pids
-		kill -s "${stopsig:-TERM}" ${pids} 2> /dev/null
+			for j in 0 1 2; do
-		yesno "${rc_send_sighup:-no}" &&
+				cgroup_get_pids || { eend 0 "finished" ; return 0 ; }
-			kill -s HUP ${pids} 2> /dev/null
+				sleep 1
-		kill -s "${stopsig:-TERM}" ${pids} 2> /dev/null
+			done
-		while [ -n "$(cgroup_get_pids)" ] &&
+		done 2>/dev/null
-			[ "${loops}" -lt "${rc_timeout_stopsec:-90}" ]; do
+	done
-			loops=$((loops+1))
+	cgroup_get_pids || { eend 0 "finished" ; return 0; }
-			sleep 1
+	kill -9 $pids
-		done
+	eend $(cgroup_running && echo 1 || echo 0) "fail to stop all processes"
-		pids="$(cgroup_get_pids)"
-		[ -n "${pids}" ] && yesno "${rc_send_sigkill:-yes}" &&
-			kill -s KILL ${pids} 2> /dev/null
-	fi
-	cgroup2_remove
-	[ -z "$(cgroup_get_pids)" ]
-	eend $? "Unable to stop all processes"
-	return 0
 }

sh/rc-functions.sh.in

@@ -85,47 +85,6 @@ get_bootparam()
 	return 1
 }
 
-get_bootparam_value()
-{
-	local match="$1" which_value="$2" sep="$3" result value
-	if [ -n "$match" -a -r /proc/cmdline ]; then
-		set -- $(cat /proc/cmdline)
-		while [ -n "$1" ]; do
-			case "$1" in
-				$match=*)
-					value="${1##*=}"
-					case "$which_value" in
-						all)
-							[ -z "$sep" ] && sep=' '
-							if [ -z "$result" ]; then
-								result="$value"
-							else
-								result="${result}${sep}${value}"
-							fi
-							;;
-						last)
-							result="$value"
-							;;
-						*)
-							result="$value"
-							break
-							;;
-					esac
-					;;
-			esac
-			shift
-		done
-	fi
-	echo $result
-}
-
-need_if_exists()
-{
-	for x; do
-		rc-service --exists "${x}" && need "${x}"
-	done
-}
-
 # Called from openrc-run.sh or gendepends.sh
 _get_containers() {
 	local c

sh/s6.sh

@@ -12,20 +12,6 @@
 
 [ -z "${s6_service_path}" ] && s6_service_path="/var/svc.d/${RC_SVCNAME}"
 
-_s6_force_kill() {
-	local pid
-	s6_service_link="${RC_SVCDIR}/s6-scan/${s6_service_path##*/}"
-	pid="${3%)}"
-	[ -z "${pid}" ] && return 0
-	if kill -0 "${pid}" 2> /dev/null; then
-		ewarn "Sending DOWN & KILL for ${RC_SVCNAME}"
-		s6-svc -dk "${s6_service_link}"
-		sleep 1
-		kill -0 "${pid}" 2>/dev/null && return 1
-	fi
-	return 0
-}
-
 s6_start()
 {
 	if [ ! -d "${s6_service_path}" ]; then
@@ -55,11 +41,7 @@ s6_stop()
  fi
 	s6_service_link="${RC_SVCDIR}/s6-scan/${s6_service_path##*/}"
 	ebegin "Stopping ${name:-$RC_SVCNAME}"
-	s6-svc -d -wD -T ${s6_service_timeout_stop:-60000} "${s6_service_link}"
+	s6-svc -wD -d -T ${s6_service_timeout_stop:-10000} "${s6_service_link}"
-	set -- $(s6-svstat "${s6_service_link}")
-	[ "$1" = "up" ] && 
-		yesno "${s6_force_kill:-yes}" &&
-			_s6_force_kill "$@"
 	set -- $(s6-svstat "${s6_service_link}")
 	[ "$1" = "down" ]
 	eend $? "Failed to stop ${name:-$RC_SVCNAME}"

sh/supervise-daemon.sh

@@ -22,13 +22,9 @@ supervise_start()
 	# The eval call is necessary for cases like:
 	# command_args="this \"is a\" test"
 	# to work properly.
-	eval supervise-daemon "${RC_SVCNAME}" --start \
+	eval supervise-daemon --start \
-		${retry:+--retry} $retry \
 		${chroot:+--chroot} $chroot \
 		${pidfile:+--pidfile} $pidfile \
-		${respawn_delay:+--respawn-delay} $respawn_delay \
-		${respawn_max:+--respawn-max} $respawn_max \
-		${respawn_period:+--respawn-period} $respawn_period \
 		${command_user+--user} $command_user \
 		$supervise_daemon_args \
 		$command \
@@ -49,48 +45,14 @@ supervise_stop()
 	pidfile="${startpidfile:-$pidfile}"
 	[ -n "$pidfile" ] || return 0
 	ebegin "Stopping ${name:-$RC_SVCNAME}"
-	supervise-daemon "${RC_SVCNAME}" --stop \
+	supervise-daemon --stop \
 		${pidfile:+--pidfile} $chroot$pidfile \
 		${stopsig:+--signal} $stopsig
 
 	eend $? "Failed to stop ${name:-$RC_SVCNAME}"
 }
 
-_check_supervised()
-{
-	local child_pid start_time
-	child_pid="$(service_get_value "child_pid")"
-	start_time="$(service_get_value "start_time")"
-	if [ -n "${child_pid}" ] && [ -n "${start_time}" ]; then
-		return 1
-	fi
-	return 0
-}
-
 supervise_status()
 {
-	if service_stopping; then
+	_status
-		ewarn "status: stopping"
-		return 4
-	elif service_starting; then
-		ewarn "status: starting"
-		return 8
-	elif service_inactive; then
-		ewarn "status: inactive"
-		return 16
-	elif service_started; then
-		if service_crashed; then
-			if ! _check_supervised; then
-				eerror "status: unsupervised"
-				return 64
-			fi
-			eerror "status: crashed"
-			return 32
-		fi
-		einfo "status: started"
-		return 0
-	else
-		einfo "status: stopped"
-		return 3
-	fi
 }

src/Makefile

@@ -3,5 +3,9 @@
 
 SUBDIR=		test libeinfo librc rc
 
+ifeq (${MKTOOLS},yes)
+SUBDIR+= tools
+endif
+
 MK=		../mk
 include		${MK}/subdir.mk

src/includes/rc-misc.h

@@ -23,7 +23,6 @@
 #include <stdbool.h>
 #include <stdlib.h>
 #include <string.h>
-#include <time.h>
 #include <unistd.h>
 
 #include "helpers.h"
@@ -47,7 +46,6 @@ bool rc_conf_yesno(const char *var);
 void env_filter(void);
 void env_config(void);
 int signal_setup(int sig, void (*handler)(int));
-int signal_setup_restart(int sig, void (*handler)(int));
 int svc_lock(const char *);
 int svc_unlock(const char *, int);
 pid_t exec_service(const char *, const char *);
@@ -70,8 +68,5 @@ RC_DEPTREE *_rc_deptree_load (int, int *);
 bool _rc_can_find_pids(void);
 
 RC_SERVICE lookup_service_state(const char *service);
-void from_time_t(char *time_string, time_t tv);
-time_t to_time_t(char *timestring);
-pid_t get_pid(const char *applet, const char *pidfile);
 
 #endif

src/includes/rc-wtmp.h

@@ -1,26 +0,0 @@
-/*
- * rc-wtmp.h
- * This is private to us and not for user consumption
-*/
-
-/*
- * Copyright (c) 2017 The OpenRC Authors.
- * See the Authors file at the top-level directory of this distribution and
- * https://github.com/OpenRC/openrc/blob/master/AUTHORS
- *
- * This file is part of OpenRC. It is subject to the license terms in
- * the LICENSE file found in the top-level directory of this
- * distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
- * This file may not be copied, modified, propagated, or distributed
- *    except according to the terms contained in the LICENSE file.
- */
-
-#ifndef __RC_WTMP_H__
-#define __RC_WTMP_H__
-
-#include <utmp.h>
-
-void log_wtmp(const char *user, const char *id, pid_t pid, int type,
-		const char *line);
-
-#endif

src/librc/librc-daemon.c

@@ -80,12 +80,9 @@ rc_find_pids(const char *exec, const char *const *argv, uid_t uid, pid_t pid)
 	DIR *procdir;
 	struct dirent *entry;
 	FILE *fp;
-	int rc;
 	bool container_pid = false;
 	bool openvz_host = false;
 	char *line = NULL;
-	char my_ns[30];
-	char proc_ns[30];
 	size_t len = 0;
 	pid_t p;
 	char buffer[PATH_MAX];
@@ -134,14 +131,6 @@ rc_find_pids(const char *exec, const char *const *argv, uid_t uid, pid_t pid)
 		}
 	}
 
-	memset(my_ns, 0, sizeof(my_ns));
-	memset(proc_ns, 0, sizeof(proc_ns));
-	if (exists("/proc/self/ns/pid")) {
-		rc = readlink("/proc/self/ns/pid", my_ns, sizeof(my_ns));
-		if (rc <= 0)
-			my_ns[0] = '\0';
-	}
-
 	while ((entry = readdir(procdir)) != NULL) {
 		if (sscanf(entry->d_name, "%d", &p) != 1)
 			continue;
@@ -149,14 +138,6 @@ rc_find_pids(const char *exec, const char *const *argv, uid_t uid, pid_t pid)
 			continue;
 		if (pid != 0 && pid != p)
 			continue;
-		snprintf(buffer, sizeof(buffer), "/proc/%d/ns/pid", p);
-		if (exists(buffer)) {
-			rc = readlink(buffer, proc_ns, sizeof(proc_ns));
-			if (rc <= 0)
-				proc_ns[0] = '\0';
-		}
-		if (strlen(my_ns) && strlen (proc_ns) && strcmp(my_ns, proc_ns))
-			continue;
 		if (uid) {
 			snprintf(buffer, sizeof(buffer), "/proc/%d", p);
 			if (stat(buffer, &sb) != 0 || sb.st_uid != uid)

src/librc/librc.c

@@ -894,15 +894,12 @@ rc_service_value_set(const char *service, const char *option,
 		return false;
 
 	snprintf(p, sizeof(file) - (p - file), "/%s", option);
-	if (value) {
+	if (!(fp = fopen(file, "w")))
-		if (!(fp = fopen(file, "w")))
+		return false;
-			return false;
+	if (value)
 		fprintf(fp, "%s", value);
-		fclose(fp);
+	fclose(fp);
-	} else {
+	return true;
-		unlink(file);
-	}
-		return true;
 }
 librc_hidden_def(rc_service_value_set)
 

src/librc/rc.h.in

@@ -39,7 +39,6 @@ extern "C" {
 #define RC_CONFDIR              RC_SYSCONFDIR "/conf.d"
 #define RC_PLUGINDIR            RC_LIBDIR "/plugins"
 
-#define RC_INIT_FIFO RC_SVCDIR"/init.ctl"
 #define RC_PROFILE_ENV     RC_SYSCONFDIR "/profile.env"
 #define RC_SYS_WHITELIST   RC_LIBEXECDIR "/conf.d/env_whitelist"
 #define RC_USR_WHITELIST   RC_SYSCONFDIR "/conf.d/env_whitelist"

src/rc/.gitignore

@@ -59,7 +59,4 @@ mark_service_failed
 rc-abort
 rc
 openrc
-openrc-init
 openrc-run
-openrc-shutdown
-kill_all

src/rc/Makefile

@@ -1,7 +1,3 @@
-include ../../Makefile.inc
-MK=		../../mk
-include ${MK}/os.mk
-
 SRCS=	checkpath.c do_e.c do_mark_service.c do_service.c \
 		do_value.c fstabinfo.c is_newer_than.c is_older_than.c \
 		mountinfo.c openrc-run.c rc-abort.c rc.c \
@@ -13,10 +9,6 @@ ifeq (${MKSELINUX},yes)
 SRCS+=		rc-selinux.c
 endif
 
-ifeq (${OS},Linux)
-SRCS+=		kill_all.c openrc-init.c openrc-shutdown.c rc-wtmp.c
-endif
-
 CLEANFILES=	version.h rc-selinux.o
 
 BINDIR=		${PREFIX}/bin
@@ -24,7 +16,7 @@ SBINDIR=	${PREFIX}/sbin
 LINKDIR=	${LIBEXECDIR}
 
 BINPROGS=	rc-status
-SBINPROGS = openrc openrc-run rc rc-service rc-update runscript \
+SBINPROGS = openrc openrc-run rc rc-service rc-update runscript service \
 			start-stop-daemon supervise-daemon
 RC_BINPROGS=	einfon einfo ewarnn ewarn eerrorn eerror ebegin eend ewend \
 				eindent eoutdent esyslog eval_ecolors ewaitfile \
@@ -42,12 +34,6 @@ RC_SBINPROGS=	mark_service_starting mark_service_started \
 		mark_service_inactive mark_service_wasinactive \
 		mark_service_hotplugged mark_service_failed \
 		rc-abort swclock
-
-ifeq (${OS},Linux)
-RC_BINPROGS+= kill_all
-SBINPROGS+= openrc-init openrc-shutdown
-endif
-
 ALL_PROGS=	${BINPROGS} ${SBINPROGS} ${RC_BINPROGS} ${RC_SBINPROGS}
 CLEANFILES+=	${ALL_PROGS}
 
@@ -55,6 +41,8 @@ LOCAL_CPPFLAGS=-I../includes -I../librc -I../libeinfo
 LOCAL_LDFLAGS=-L../librc -L../libeinfo
 LDADD+=		-lutil -lrc -leinfo
 
+include ../../Makefile.inc
+MK=		../../mk
 include ${MK}/prog.mk
 include ${MK}/gitver.mk
 include ${MK}/cc.mk
@@ -100,9 +88,6 @@ checkpath: rc-selinux.o
 endif
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
-kill_all: kill_all.o _usage.o
-	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
-
 einfon einfo ewarnn ewarn eerrorn eerror ebegin eend ewend \
 eindent eoutdent esyslog eval_ecolors ewaitfile \
 veinfo vewarn vebegin veend vewend veindent veoutdent: do_e.o rc-misc.o
@@ -111,9 +96,6 @@ veinfo vewarn vebegin veend vewend veindent veoutdent: do_e.o rc-misc.o
 fstabinfo: fstabinfo.o _usage.o rc-misc.o
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
-openrc-init: openrc-init.o rc-wtmp.o
-	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
-
 is_newer_than: is_newer_than.o rc-misc.o
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
@@ -132,9 +114,6 @@ mountinfo: mountinfo.o _usage.o rc-misc.o
 openrc rc: rc.o rc-logger.o rc-misc.o rc-plugin.o _usage.o
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
-openrc-shutdown: openrc-shutdown.o _usage.o rc-wtmp.o
-	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
-
 openrc-run runscript: openrc-run.o _usage.o rc-misc.o rc-plugin.o
 ifeq (${MKSELINUX},yes)
 openrc-run runscript: rc-selinux.o
@@ -150,16 +129,16 @@ rc-depend: rc-depend.o _usage.o rc-misc.o
 rc-status: rc-status.o _usage.o rc-misc.o
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
-rc-service: rc-service.o _usage.o rc-misc.o
+rc-service service: rc-service.o _usage.o rc-misc.o
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
 rc-update: rc-update.o _usage.o rc-misc.o
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
-start-stop-daemon: start-stop-daemon.o _usage.o rc-misc.o rc-schedules.o
+start-stop-daemon: start-stop-daemon.o _usage.o rc-misc.o
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
-supervise-daemon: supervise-daemon.o _usage.o rc-misc.o rc-schedules.o
+supervise-daemon: supervise-daemon.o _usage.o rc-misc.o
 	${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD}
 
 service_get_value service_set_value get_options save_options: do_value.o rc-misc.o

src/rc/fstabinfo.c

@@ -35,11 +35,11 @@
 #  define GET_ENT getmntent (fp)
 #  define GET_ENT_FILE(_name) getmntfile (_name)
 #  define END_ENT endmntent (fp)
-#  define ENT_BLOCKDEVICE(_ent) (_ent)->mnt_fsname
+#  define ENT_BLOCKDEVICE(_ent) ent->mnt_fsname
-#  define ENT_FILE(_ent) (_ent)->mnt_dir
+#  define ENT_FILE(_ent) ent->mnt_dir
-#  define ENT_TYPE(_ent) (_ent)->mnt_type
+#  define ENT_TYPE(_ent) ent->mnt_type
-#  define ENT_OPTS(_ent) (_ent)->mnt_opts
+#  define ENT_OPTS(_ent) ent->mnt_opts
-#  define ENT_PASS(_ent) (_ent)->mnt_passno
+#  define ENT_PASS(_ent) ent->mnt_passno
 #else
 #  define HAVE_GETFSENT
 #  include <fstab.h>
@@ -48,11 +48,11 @@
 #  define GET_ENT getfsent ()
 #  define GET_ENT_FILE(_name) getfsfile (_name)
 #  define END_ENT endfsent ()
-#  define ENT_BLOCKDEVICE(_ent) (_ent)->fs_spec
+#  define ENT_BLOCKDEVICE(_ent) ent->fs_spec
-#  define ENT_TYPE(_ent) (_ent)->fs_vfstype
+#  define ENT_TYPE(_ent) ent->fs_vfstype
-#  define ENT_FILE(_ent) (_ent)->fs_file
+#  define ENT_FILE(_ent) ent->fs_file
-#  define ENT_OPTS(_ent) (_ent)->fs_mntops
+#  define ENT_OPTS(_ent) ent->fs_mntops
-#  define ENT_PASS(_ent) (_ent)->fs_passno
+#  define ENT_PASS(_ent) ent->fs_passno
 #endif
 
 #include "einfo.h"
@@ -114,24 +114,24 @@ do_mount(struct ENT *ent, bool remount)
 
 	argv[0] = UNCONST("mount");
 	argv[1] = UNCONST("-o");
-	argv[2] = ENT_OPTS(ent);
+	argv[2] = ENT_OPTS(*ent);
 	argv[3] = UNCONST("-t");
-	argv[4] = ENT_TYPE(ent);
+	argv[4] = ENT_TYPE(*ent);
 	if (!remount) {
-		argv[5] = ENT_BLOCKDEVICE(ent);
+		argv[5] = ENT_BLOCKDEVICE(*ent);
-		argv[6] = ENT_FILE(ent);
+		argv[6] = ENT_FILE(*ent);
 		argv[7] = NULL;
 	} else {
 #ifdef __linux__
 		argv[5] = UNCONST("-o");
 		argv[6] = UNCONST("remount");
-		argv[7] = ENT_BLOCKDEVICE(ent);
+		argv[7] = ENT_BLOCKDEVICE(*ent);
-		argv[8] = ENT_FILE(ent);
+		argv[8] = ENT_FILE(*ent);
 		argv[9] = NULL;
 #else
 		argv[5] = UNCONST("-u");
-		argv[6] = ENT_BLOCKDEVICE(ent);
+		argv[6] = ENT_BLOCKDEVICE(*ent);
-		argv[7] = ENT_FILE(ent);
+		argv[7] = ENT_FILE(*ent);
 		argv[8] = NULL;
 #endif
 	}

src/rc/kill_all.c

@@ -1,251 +0,0 @@
-/*
- * kill_all.c
- * Sends a signal to all processes on the system.
- */
-
-/*
- * Copyright (c) 2017 The OpenRC Authors.
- * See the Authors file at the top-level directory of this distribution and
- * https://github.com/OpenRC/openrc/blob/master/AUTHORS
- *
- * This file is part of OpenRC. It is subject to the license terms in
- * the LICENSE file found in the top-level directory of this
- * distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
- * This file may not be copied, modified, propagated, or distributed
- *    except according to the terms contained in the LICENSE file.
- */
-
-
-#include <dirent.h>
-#include <errno.h>
-#include <getopt.h>
-#include <limits.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <syslog.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-
-#include "einfo.h"
-#include "rc.h"
-#include "rc-misc.h"
-#include "_usage.h"
-
-const char *applet = NULL;
-const char *extraopts = "[signal number]";
-const char *getoptstring = "do:" getoptstring_COMMON;
-const struct option longopts[] = {
-	{ "dry-run",        0, NULL, 'd' },
-	{ "omit",        1, NULL, 'o' },
-	longopts_COMMON
-};
-const char * const longopts_help[] = {
-	"print what would be done",
-	"omit this pid (can be repeated)",
-	longopts_help_COMMON
-};
-const char *usagestring = NULL;
-
-static int mount_proc(void)
-{
-	pid_t pid;
-	pid_t rc;
-	int status;
-
-	if (exists("/proc/version"))
-		return 0;
-	pid = fork();
-	switch(pid) {
-		case -1:
-			syslog(LOG_ERR, "Unable to fork");
-			return -1;
-			break;
-		case 0:
-			/* attempt to mount /proc */
-			execl("mount", "mount", "-t", "proc", "proc", "/proc", NULL);
-			syslog(LOG_ERR, "Unable to execute mount");
-			exit(1);
-			break;
-		default:
-			/* wait for child process */
-			while ((rc = wait(&status)) != pid)
-				if (rc < 0 && errno == ECHILD)
-					break;
-			if (rc != pid || WEXITSTATUS(status) != 0)
-				syslog(LOG_ERR, "mount returned non-zero exit status");
-			break;
-	}
-	if (! exists("/proc/version")) {
-		syslog(LOG_ERR, "Could not mount /proc");
-		return -1;
-	}
-	return 0;
-}
-
-static bool is_user_process(pid_t pid)
-{
-	char buf[PATH_MAX+1];
-	FILE *fp;
-	char path[PATH_MAX+1];
-	pid_t temp_pid;
-	bool user_process = true;
-
-	while (pid >0 && user_process) {
-		if (pid == 2) {
-			user_process = false;
-			continue;
-		}
-		snprintf(path, sizeof(path), "/proc/%d/status", pid);
-		fp = fopen(path, "r");
-		/*
-		 * if we could not open the file, the process disappeared, which
-		 * leaves us no way to determine for sure whether it was a user
-		 * process or kernel thread, so we say it is a kernel thread to
-		 * avoid accidentally killing it.
-		 */
-		if (!fp) {
-			user_process = false;
-			continue;
-		}
-		temp_pid = -1;
-		while (! feof(fp)) {
-			buf[0] = 0;
-			if (fgets(buf, sizeof(buf), fp))
-				sscanf(buf, "PPid: %d", &temp_pid);
-			else
-				break;
-		}
-		fclose(fp);
-		if (temp_pid == -1) {
-			syslog(LOG_ERR, "Unable to read pid from /proc/%d/status", pid);
-			user_process = false;
-			continue;
-		}
-		pid = temp_pid;
-	}
-	return user_process;
-}
-
-static int signal_processes(int sig, RC_STRINGLIST *omits, bool dryrun)
-{
-	sigset_t signals;
-	sigset_t oldsigs;
-	DIR *dir;
-	struct dirent	*d;
-	char buf[PATH_MAX+1];
-	pid_t pid;
-	int sendcount = 0;
-
-	kill(-1, SIGSTOP);
-	sigfillset(&signals);
-	sigemptyset(&oldsigs);
-	sigprocmask(SIG_SETMASK, &signals, &oldsigs);
-	/*
-	 * Open the /proc directory.
-	 * CWD must be /proc to avoid problems if / is affected by the killing
-	 * (i.e. depends on fuse).
-	 */
-	if (chdir("/proc") == -1) {
-		syslog(LOG_ERR, "chdir /proc failed");
-		sigprocmask(SIG_SETMASK, &oldsigs, NULL);
-		kill(-1, SIGCONT);
-		return -1;
-	}
-	dir = opendir(".");
-	if (!dir) {
-		syslog(LOG_ERR, "cannot opendir(/proc)");
-		sigprocmask(SIG_SETMASK, &oldsigs, NULL);
-		kill(-1, SIGCONT);
-		return -1;
-	}
-
-	/* Walk through the directory. */
-	while ((d = readdir(dir)) != NULL) {
-		/* Is this a process? */
-		pid = (pid_t) atoi(d->d_name);
-		if (pid == 0)
-			continue;
-
-		/* Is this a process we have been requested to omit? */
-		sprintf(buf, "%d", pid);
-		if (rc_stringlist_find(omits, buf))
-			continue;
-
-		/* Is this process in our session? */
-		if (getsid(getpid()) == getsid(pid))
-			continue;
-
-		/* Is this a kernel thread? */
-		if (!is_user_process(pid))
-			continue;
-
-		if (dryrun)
-			einfo("Would send signal %d to process %d", sig, pid);
-		else if (kill(pid, sig) == 0)
-			sendcount++;
-	}
-	closedir(dir);
-	sigprocmask(SIG_SETMASK, &oldsigs, NULL);
-	kill(-1, SIGCONT);
-	return sendcount;
-}
-
-int main(int argc, char **argv)
-{
-	char *arg = NULL;
-	int opt;
-	bool dryrun = false;
-	RC_STRINGLIST *omits = rc_stringlist_new();
-	int sig = SIGKILL;
-	char *here;
-	char *token;
-
-	/* Ensure that we are only quiet when explicitly told to be */
-	unsetenv("EINFO_QUIET");
-
-	applet = basename_c(argv[0]);
-	rc_stringlist_addu(omits, "1");
-	while ((opt = getopt_long(argc, argv, getoptstring,
-		    longopts, (int *) 0)) != -1)
-	{
-		switch (opt) {
-			case 'd':
-				dryrun = true;
-				break;
-			case 'o':
-				here = optarg;
-				while ((token = strsep(&here, ",;:"))) {
-					if ((pid_t) atoi(token) > 0)
-						rc_stringlist_addu(omits, token);
-					else {
-						eerror("Invalid omit pid value %s", token);
-						usage(EXIT_FAILURE);
-					}
-				}
-				break;
-			case_RC_COMMON_GETOPT
-		}
-	}
-
-	if (argc > optind) {
-	arg = argv[optind];
-	sig = atoi(arg);
-	if (sig <= 0 || sig > 31) {
-		rc_stringlist_free(omits);
-		eerror("Invalid signal %s", arg);
-		usage(EXIT_FAILURE);
-	}
-	}
-	
-	openlog(applet, LOG_CONS|LOG_PID, LOG_DAEMON);
-	if (mount_proc() != 0) {
-		rc_stringlist_free(omits);
-		eerrorx("Unable to mount /proc file system");
-	}
-	signal_processes(sig, omits, dryrun);
-	rc_stringlist_free(omits);
-	return 0;
-}

src/rc/openrc-init.c

@@ -1,218 +0,0 @@
-/*
- * openrc-init.c
- * This is the init process (pid 1) for OpenRC.
- *
- * This is based on code written by James Hammons <jlhamm@acm.org>, so
- * I would like to publically thank him for his work.
- */
-
-/*
- * Copyright (c) 2017 The OpenRC Authors.
- * See the Authors file at the top-level directory of this distribution and
- * https://github.com/OpenRC/openrc/blob/master/AUTHORS
- *
- * This file is part of OpenRC. It is subject to the license terms in
- * the LICENSE file found in the top-level directory of this
- * distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
- * This file may not be copied, modified, propagated, or distributed
- *    except according to the terms contained in the LICENSE file.
- */
-
-#include <errno.h>
-#include <signal.h>
-#include <stdbool.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/reboot.h>
-#include <sys/wait.h>
-
-#include "helpers.h"
-#include "rc.h"
-#include "rc-wtmp.h"
-#include "version.h"
-
-static const char *rc_default_runlevel = "default";
-
-static pid_t do_openrc(const char *runlevel)
-{
-	pid_t pid;
-	sigset_t signals;
-
-	pid = fork();
-	switch(pid) {
-		case -1:
-			perror("fork");
-			break;
-		case 0:
-			setsid();
-			/* unblock all signals */
-			sigemptyset(&signals);
-			sigprocmask(SIG_SETMASK, &signals, NULL);
-			printf("Starting %s runlevel\n", runlevel);
-			execl("/sbin/openrc", "/sbin/openrc", runlevel, NULL);
-			perror("exec");
-			break;
-		default:
-			break;
-	}
-	return pid;
-}
-
-static void init(const char *default_runlevel)
-{
-	const char *runlevel = NULL;
-	pid_t pid;
-
-	pid = do_openrc("sysinit");
-	waitpid(pid, NULL, 0);
-	pid = do_openrc("boot");
-	waitpid(pid, NULL, 0);
-	if (default_runlevel)
-		runlevel = default_runlevel;
-	else
-		runlevel = rc_conf_value("rc_default_runlevel");
-	if (!runlevel)
-		runlevel = rc_default_runlevel;
-	if (!rc_runlevel_exists(runlevel)) {
-		printf("%s is an invalid runlevel\n", runlevel);
-		runlevel = rc_default_runlevel;
-	}
-	pid = do_openrc(runlevel);
-	waitpid(pid, NULL, 0);
-	log_wtmp("reboot", "~~", 0, RUN_LVL, "~~");
-}
-
-static void handle_reexec(char *my_name)
-{
-	execl(my_name, my_name, "reexec", NULL);
-	return;
-}
-
-static void handle_shutdown(const char *runlevel, int cmd)
-{
-	pid_t pid;
-
-	pid = do_openrc(runlevel);
-	while (waitpid(pid, NULL, 0) != pid);
-	printf("Sending the final term signal\n");
-	kill(-1, SIGTERM);
-	sleep(3);
-	printf("Sending the final kill signal\n");
-	kill(-1, SIGKILL);
-	sync();
-	reboot(cmd);
-}
-
-static void handle_single(void)
-{
-	pid_t pid;
-
-	pid = do_openrc("single");
-	while (waitpid(pid, NULL, 0) != pid);
-}
-
-static void reap_zombies(void)
-{
-	pid_t pid;
-
-	for (;;) {
-		pid = waitpid(-1, NULL, WNOHANG);
-		if (pid == 0)
-			break;
-		else if (pid == -1) {
-			if (errno == ECHILD)
-				break;
-			perror("waitpid");
-			continue;
-		}
-	}
-}
-
-static void signal_handler(int sig)
-{
-	switch(sig) {
-		case SIGINT:
-			handle_shutdown("reboot", RB_AUTOBOOT);
-			break;
-		case SIGCHLD:
-			reap_zombies();
-			break;
-		default:
-			printf("Unknown signal received, %d\n", sig);
-			break;
-	}
-}
-
-int main(int argc, char **argv)
-{
-	char *default_runlevel;
-	char buf[2048];
-	int count;
-	FILE *fifo;
-	bool reexec = false;
-	sigset_t signals;
-	struct sigaction sa;
-
-	if (getpid() != 1)
-		return 1;
-
-	printf("OpenRC init version %s starting\n", VERSION);
-
-	if (argc > 1)
-		default_runlevel = argv[1];
-	else
-		default_runlevel = NULL;
-
-	if (default_runlevel && strcmp(default_runlevel, "reexec") == 0)
-		reexec = true;
-
-	/* block all signals we do not handle */
-	sigfillset(&signals);
-	sigdelset(&signals, SIGCHLD);
-	sigdelset(&signals, SIGINT);
-	sigprocmask(SIG_SETMASK, &signals, NULL);
-
-	/* install signal  handler */
-	memset(&sa, 0, sizeof(sa));
-	sa.sa_handler = signal_handler;
-	sigaction(SIGCHLD, &sa, NULL);
-	sigaction(SIGINT, &sa, NULL);
-	reboot(RB_DISABLE_CAD);
-
-	if (! reexec)
-		init(default_runlevel);
-
-	if (mkfifo(RC_INIT_FIFO, 0600) == -1 && errno != EEXIST)
-		perror("mkfifo");
-
-	for (;;) {
-		/* This will block until a command is sent down the pipe... */
-		fifo = fopen(RC_INIT_FIFO, "r");
-		if (!fifo) {
-			if (errno != EINTR)
-				perror("fopen");
-			continue;
-		}
-		count = fread(buf, 1, sizeof(buf) - 1, fifo);
-		buf[count] = 0;
-		fclose(fifo);
-		printf("PID1: Received \"%s\" from FIFO...\n", buf);
-		if (strcmp(buf, "halt") == 0)
-			handle_shutdown("shutdown", RB_HALT_SYSTEM);
-		else if (strcmp(buf, "kexec") == 0)
-			handle_shutdown("reboot", RB_KEXEC);
-		else if (strcmp(buf, "poweroff") == 0)
-			handle_shutdown("shutdown", RB_POWER_OFF);
-		else if (strcmp(buf, "reboot") == 0)
-			handle_shutdown("reboot", RB_AUTOBOOT);
-		else if (strcmp(buf, "reexec") == 0)
-			handle_reexec(argv[0]);
-		else if (strcmp(buf, "single") == 0)
-			handle_single();
-	}
-	return 0;
-}

src/rc/openrc-shutdown.c

@@ -1,170 +0,0 @@
-/*
- * openrc-shutdown.c
- * If you are using OpenRC's provided init, this will shut down or
- * reboot your system.
- *
- * This is based on code written by James Hammons <jlhamm@acm.org>, so
- * I would like to publically thank him for his work.
- */
-
-/*
- * Copyright 2017 The OpenRC Authors.
- * See the Authors file at the top-level directory of this distribution and
- * https://github.com/OpenRC/openrc/blob/master/AUTHORS
- *
- * This file is part of OpenRC. It is subject to the license terms in
- * the LICENSE file found in the top-level directory of this
- * distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
- * This file may not be copied, modified, propagated, or distributed
- *    except according to the terms contained in the LICENSE file.
- */
-
-#include <getopt.h>
-#include <signal.h>
-#include <stdbool.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/utsname.h>
-
-#include "einfo.h"
-#include "rc.h"
-#include "helpers.h"
-#include "_usage.h"
-#include "rc-wtmp.h"
-
-const char *applet = NULL;
-const char *extraopts = NULL;
-const char *getoptstring = "dDHKpRrsw" getoptstring_COMMON;
-const struct option longopts[] = {
-	{ "no-write",        no_argument, NULL, 'd'},
-	{ "dry-run",        no_argument, NULL, 'D'},
-	{ "halt",        no_argument, NULL, 'H'},
-	{ "kexec",        no_argument, NULL, 'K'},
-	{ "poweroff",        no_argument, NULL, 'p'},
-	{ "reexec",        no_argument, NULL, 'R'},
-	{ "reboot",        no_argument, NULL, 'r'},
-	{ "single",        no_argument, NULL, 's'},
-	{ "write-only",        no_argument, NULL, 'w'},
-	longopts_COMMON
-};
-const char * const longopts_help[] = {
-	"do not write wtmp record",
-	"print actions instead of executing them",
-	"halt the system",
-	"reboot the system using kexec",
-	"power off the system",
-	"re-execute init (use after upgrading)",
-	"reboot the system",
-	"single user mode",
-	"write wtmp boot record and exit",
-	longopts_help_COMMON
-};
-const char *usagestring = NULL;
-const char *exclusive = "Select one of "
-"--halt, --kexec, --poweroff, --reexec, --reboot, --single or --write-only";
-
-static bool do_dryrun = false;
-static bool do_halt = false;
-static bool do_kexec = false;
-static bool do_poweroff = false;
-static bool do_reboot = false;
-static bool do_reexec = false;
-static bool do_single = false;
-static bool do_wtmp = true;
-static bool do_wtmp_only = false;
-
-static void send_cmd(const char *cmd)
-{
-	FILE *fifo;
- 	size_t ignored;
-
-	if (do_dryrun) {
-		einfo("Would send %s to init", cmd);
-		return;
-	}
-	if (do_wtmp && (do_halt || do_kexec || do_reboot || do_poweroff))
-		log_wtmp("shutdown", "~~", 0, RUN_LVL, "~~");
-	fifo = fopen(RC_INIT_FIFO, "w");
-	if (!fifo) {
-		perror("fopen");
-		return;
-	}
-
-	ignored = fwrite(cmd, 1, strlen(cmd), fifo);
-	if (ignored != strlen(cmd))
-		printf("Error writing to init fifo\n");
-	fclose(fifo);
-}
-
-int main(int argc, char **argv)
-{
-	int opt;
-	int cmd_count = 0;
-
-	applet = basename_c(argv[0]);
-	while ((opt = getopt_long(argc, argv, getoptstring,
-		    longopts, (int *) 0)) != -1)
-	{
-		switch (opt) {
-			case 'd':
-				do_wtmp = false;
-				break;
-		case 'D':
-			do_dryrun = true;
-			break;
-		case 'H':
-			do_halt = true;
-			cmd_count++;
-			break;
-		case 'K':
-			do_kexec = true;
-			cmd_count++;
-			break;
-		case 'p':
-			do_poweroff = true;
-			cmd_count++;
-			break;
-		case 'R':
-			do_reexec = true;
-			cmd_count++;
-			break;
-		case 'r':
-			do_reboot = true;
-			cmd_count++;
-			break;
-		case 's':
-			do_single = true;
-			cmd_count++;
-			break;
-		case 'w':
-			do_wtmp_only = true;
-			cmd_count++;
-			break;
-		case_RC_COMMON_GETOPT
-		}
-	}
-	if (geteuid() != 0 && ! do_dryrun)
-		eerrorx("%s: you must be root\n", applet);
-	if (cmd_count != 1) {
-		eerror("%s: %s\n", applet, exclusive);
-		usage(EXIT_FAILURE);
-	}
-	if (do_halt)
-		send_cmd("halt");
-	else if (do_kexec)
-		send_cmd("kexec");
-	else if (do_poweroff)
-		send_cmd("poweroff");
-	else if (do_reboot)
-		send_cmd("reboot");
-	else if (do_reexec)
-		send_cmd("reexec");
-	else if (do_wtmp_only)
-		log_wtmp("shutdown", "~~", 0, RUN_LVL, "~~");
-	else if (do_single)
-		send_cmd("single");
-	return 0;
-}