remove cg1 & hybrid cg

etc/rc.conf

@@ -194,18 +194,6 @@ rc_tty_number=12
 ##############################################################################
 # LINUX CGROUPS RESOURCE MANAGEMENT
 
-# This sets the mode used to mount cgroups.
-# "hybrid" mounts cgroups version 2 on /sys/fs/cgroup/unified and
-# cgroups version 1 on /sys/fs/cgroup.
-# "legacy" mounts cgroups version 1 on /sys/fs/cgroup
-# "unified" mounts cgroups version 2 on /sys/fs/cgroup
-#rc_cgroup_mode="unified"
-
-# This is a list of controllers which should be enabled for cgroups version 2
-# when hybrid mode is being used.
-# Controllers listed here will not be available for cgroups version 1.
-#rc_cgroup_controllers=""
-
 # This variable contains the cgroups version 2 settings for your services.
 # If this is set in this file, the settings will apply to all services.
 # If you want different settings for each service, place the settings in
@@ -224,64 +212,6 @@ rc_tty_number=12
 # source tree.
 #rc_cgroup_settings=""
 
-# This switch controls whether or not cgroups version 1 controllers are
-# individually mounted under
-# /sys/fs/cgroup in hybrid or legacy mode.
-#rc_controller_cgroups="YES"
-
-# The following setting turns on the memory.use_hierarchy setting in the
-# root memory cgroup for cgroups v1.
-# It must be set to yes in this file if you want this functionality.
-#rc_cgroup_memory_use_hierarchy="NO"
-
-# The following settings allow you to set up values for the cgroups version 1
-# controllers for your services.
-# They can be set in this file;, however, if you do this, the settings
-# will apply to all of your services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the names of the settings followed by their
-# values. Each variable can hold multiple settings.
-# For example, you would use this to set the cpu.shares setting in the
-# cpu controller to 512 for your service.
-# rc_cgroup_cpu="
-# cpu.shares 512
-# "
-#
-# For more information about the adjustments that can be made with
-# cgroups version 1, see Documentation/cgroups-v1/* in the linux kernel
-# source tree.
-
-# Set the blkio controller settings for this service.
-#rc_cgroup_blkio=""
-
-# Set the cpu controller settings for this service.
-#rc_cgroup_cpu=""
-
-# Add this service to the cpuacct controller (any value means yes).
-#rc_cgroup_cpuacct=""
-
-# Set the cpuset controller settings for this service.
-#rc_cgroup_cpuset=""
-
-# Set the devices controller settings for this service.
-#rc_cgroup_devices=""
-
-# Set the hugetlb controller settings for this service.
-#rc_cgroup_hugetlb=""
-
-# Set the memory controller settings for this service.
-#rc_cgroup_memory=""
-
-# Set the net_cls controller settings for this service.
-#rc_cgroup_net_cls=""
-
-# Set the net_prio controller settings for this service.
-#rc_cgroup_net_prio=""
-
-# Set the pids controller settings for this service.
-#rc_cgroup_pids=""
-
 # Set this to YES if you want all of the processes in a service's cgroup
 # killed when the service is stopped or restarted.
 # Be aware that setting this to yes means all of a service's

init.d/cgroups.in

@@ -19,53 +19,6 @@ depend()
 	after sysfs
 }
 
-cgroup1_base()
-{
-	grep -qw cgroup /proc/filesystems || return 0
-	if ! mountinfo -q /sys/fs/cgroup; then
-		ebegin "Mounting cgroup filesystem"
-		local opts="${cgroup_opts},mode=755,size=${rc_cgroupsize:-10m}"
-		mount -n -t tmpfs -o "${opts}" cgroup_root /sys/fs/cgroup
-		eend $?
-	fi
-
-	if ! mountinfo -q /sys/fs/cgroup/openrc; then
-		local agent="${RC_LIBEXECDIR}/sh/cgroup-release-agent.sh"
-		mkdir /sys/fs/cgroup/openrc
-		mount -n -t cgroup \
-			-o none,${cgroup_opts},name=openrc,release_agent="$agent" \
-			openrc /sys/fs/cgroup/openrc
-		printf 1 > /sys/fs/cgroup/openrc/notify_on_release
-	fi
-	return 0
-}
-
-cgroup1_controllers()
-{
-	yesno "${rc_controller_cgroups:-YES}" && [ -e /proc/cgroups ]  &&
-	grep -qw cgroup /proc/filesystems || return 0
-	while read -r name _ _ enabled _; do
-		case "${enabled}" in
-			1)	mountinfo -q "/sys/fs/cgroup/${name}" && continue
-				local x
-				for x in $rc_cgroup_controllers; do
-				[ "${name}" = "blkio" ] && [ "${x}" = "io" ] &&
-					continue 2
-				[ "${name}" = "${x}" ] &&
-				continue 2
-				done
-				mkdir "/sys/fs/cgroup/${name}"
-				mount -n -t cgroup -o "${cgroup_opts},${name}" \
-					"${name}" "/sys/fs/cgroup/${name}"
-				yesno "${rc_cgroup_memory_use_hierarchy:-no}" &&
-					[ "${name}" = memory ] &&
-					echo 1 > /sys/fs/cgroup/memory/memory.use_hierarchy
-				;;
-		esac
-	done < /proc/cgroups
-	return 0
-}
-
 cgroup2_base()
 {
 	grep -qw cgroup2 /proc/filesystems || return 0
@@ -87,35 +40,8 @@ cgroup2_controllers()
 	[ ! -e "${cgroup_path}/cgroup.subtree_control" ]&& return 0
 	read -r active < "${cgroup_path}/cgroup.controllers"
 	for x in ${active}; do
-	case "${rc_cgroup_mode:-unified}" in
-		unified)
 			echo "+${x}"  > "${cgroup_path}/cgroup.subtree_control"
-			;;
-		hybrid)
-			for y in ${rc_cgroup_controllers}; do
-				if [ "$x" = "$y" ]; then
-					echo "+${x}"  > "${cgroup_path}/cgroup.subtree_control"
-				fi
 	done
-			;;
-		esac
-	done
-	return 0
-}
-
-cgroups_hybrid()
-{
-	cgroup1_base
-	cgroup2_base
-	cgroup2_controllers
-	cgroup1_controllers
-	return 0
-}
-
-cgroups_legacy()
-{
-	cgroup1_base
-	cgroup1_controllers
 	return 0
 }
 
@@ -128,11 +54,7 @@ cgroups_unified()
 
 mount_cgroups()
 {
-	case "${rc_cgroup_mode:-unified}" in
-	hybrid) cgroups_hybrid ;;
-	legacy) cgroups_legacy ;;
-	unified) cgroups_unified ;;
-	esac
+	cgroups_unified
 	return 0
 }
 

sh/openrc-run.sh.in

@@ -259,20 +259,6 @@ for _cmd; do
 				eerror "${RC_SVCNAME}: unable to apply RC_ULIMIT settings"
 			fi
 		fi
-		# Apply cgroups settings if defined
-		if [ "$(command -v cgroup_add_service)" = "cgroup_add_service" ]
-		then
-			if grep -qs /sys/fs/cgroup /proc/1/mountinfo
-			then
-				if [ -d /sys/fs/cgroup -a ! -w /sys/fs/cgroup ]; then
-					eerror "No permission to apply cgroup settings"
-					break
-				fi
-			fi
-			cgroup_add_service
-		fi
-		[ "$(command -v cgroup_set_limits)" = "cgroup_set_limits" ] &&
-			cgroup_set_limits
 		[ "$(command -v cgroup2_set_limits)" = "cgroup2_set_limits" ] &&
 			[ "$_cmd" = start ] &&
 			cgroup2_set_limits

sh/rc-cgroup.sh

@@ -11,19 +11,6 @@
 extra_stopped_commands="${extra_stopped_commands} cgroup_cleanup"
 description_cgroup_cleanup="Kill all processes in the cgroup"
 
-cgroup_find_path()
-{
-	local OIFS name dir result
-	[ -n "$1" ] || return 0
-	OIFS="$IFS"
-	IFS=":"
-	while read -r _ name dir; do
-		[ "$name" = "$1" ] && result="$dir"
-	done < /proc/1/cgroup
-	IFS="$OIFS"
-	printf "%s" "${result}"
-}
-
 # This extracts all pids in a cgroup and puts them in the cgroup_pids
 # variable.
 # It is done this way to avoid subshells so we don't have to worry about
@@ -36,8 +23,6 @@ cgroup_get_pids()
 	cgroup_procs="$(cgroup2_find_path)"
 	if [ -n "${cgroup_procs}" ]; then
 		cgroup_procs="${cgroup_procs}/openrc.${RC_SVCNAME}/cgroup.procs"
-	else
-		cgroup_procs="/sys/fs/cgroup/openrc/${RC_SVCNAME}/tasks"
 	fi
 	[ -f "${cgroup_procs}" ] || return 0
 	while read -r p; do
@@ -49,115 +34,13 @@ cgroup_get_pids()
 
 cgroup_running()
 {
-	[ -d "/sys/fs/cgroup/unified/${RC_SVCNAME}" ] ||
-			[ -d "/sys/fs/cgroup/${RC_SVCNAME}" ] ||
-			[ -d "/sys/fs/cgroup/openrc/${RC_SVCNAME}" ]
-}
-
-cgroup_set_values()
-{
-	[ -n "$1" ] && [ -n "$2" ] && [ -d "/sys/fs/cgroup/$1" ] || return 0
-
-	local controller h
-	controller="$1"
-	h=$(cgroup_find_path "$1")
-	cgroup="/sys/fs/cgroup/${1}${h}openrc_${RC_SVCNAME}"
-	[ -d "$cgroup" ] || mkdir -p "$cgroup"
-
-	set -- $2
-	local name val
-	while [ -n "$1" ] && [ "$controller" != "cpuacct" ]; do
-		case "$1" in
-			$controller.*)
-				if [ -n "${name}" ] && [ -w "${cgroup}/${name}" ] &&
-					[ -n "${val}" ]; then
-					veinfo "$RC_SVCNAME: Setting $cgroup/$name to $val"
-					printf "%s" "$val" > "$cgroup/$name"
-				fi
-				name=$1
-				val=
-				;;
-			*)
-				[ -n "$val" ] &&
-					val="$val $1" ||
-					val="$1"
-				;;
-		esac
-		shift
-	done
-	if [ -n "${name}" ] && [ -w "${cgroup}/${name}" ] && [ -n "${val}" ]; then
-		veinfo "$RC_SVCNAME: Setting $cgroup/$name to $val"
-		printf "%s" "$val" > "$cgroup/$name"
-	fi
-
-	if [ -w "$cgroup/tasks" ]; then
-		veinfo "$RC_SVCNAME: adding to $cgroup/tasks"
-		printf "%d" 0 > "$cgroup/tasks"
-	fi
-
-	return 0
-}
-
-cgroup_add_service()
-{
-    # relocate starting process to the top of the cgroup
-    # it prevents from unwanted inheriting of the user
-    # cgroups. But may lead to a problems where that inheriting
-    # is needed.
-	for d in /sys/fs/cgroup/* ; do
-		[ -w "${d}"/tasks ] && printf "%d" 0 > "${d}"/tasks
-	done
-
-	openrc_cgroup=/sys/fs/cgroup/openrc
-	if [ -d "$openrc_cgroup" ]; then
-		cgroup="$openrc_cgroup/$RC_SVCNAME"
-		mkdir -p "$cgroup"
-		[ -w "$cgroup/tasks" ] && printf "%d" 0 > "$cgroup/tasks"
-	fi
-}
-
-cgroup_set_limits()
-{
-	local blkio="${rc_cgroup_blkio:-$RC_CGROUP_BLKIO}"
-	[ -n "$blkio" ] && cgroup_set_values blkio "$blkio"
-
-	local cpu="${rc_cgroup_cpu:-$RC_CGROUP_CPU}"
-	[ -n "$cpu" ] && cgroup_set_values cpu "$cpu"
-
-	local cpuacct="${rc_cgroup_cpuacct:-$RC_CGROUP_CPUACCT}"
-	[ -n "$cpuacct" ] && cgroup_set_values cpuacct "$cpuacct"
-
-	local cpuset="${rc_cgroup_cpuset:-$RC_CGROUP_cpuset}"
-	[ -n "$cpuset" ] && cgroup_set_values cpuset "$cpuset"
-
-	local devices="${rc_cgroup_devices:-$RC_CGROUP_DEVICES}"
-	[ -n "$devices" ] && cgroup_set_values devices "$devices"
-
-	local hugetlb="${rc_cgroup_hugetlb:-$RC_CGROUP_HUGETLB}"
-	[ -n "$hugetlb" ] && cgroup_set_values hugetlb "$hugetlb"
-
-	local memory="${rc_cgroup_memory:-$RC_CGROUP_MEMORY}"
-	[ -n "$memory" ] && cgroup_set_values memory "$memory"
-
-	local net_cls="${rc_cgroup_net_cls:-$RC_CGROUP_NET_CLS}"
-	[ -n "$net_cls" ] && cgroup_set_values net_cls "$net_cls"
-
-	local net_prio="${rc_cgroup_net_prio:-$RC_CGROUP_NET_PRIO}"
-	[ -n "$net_prio" ] && cgroup_set_values net_prio "$net_prio"
-
-	local pids="${rc_cgroup_pids:-$RC_CGROUP_PIDS}"
-	[ -n "$pids" ] && cgroup_set_values pids "$pids"
-
-	return 0
+			[ -d "/sys/fs/cgroup/${RC_SVCNAME}" ]
 }
 
 cgroup2_find_path()
 {
 	if grep -qw cgroup2 /proc/filesystems; then
-		case "${rc_cgroup_mode:-unified}" in
-			hybrid) printf "/sys/fs/cgroup/unified" ;;
-			unified) printf "/sys/fs/cgroup" ;;
-		esac
+			printf "/sys/fs/cgroup"
 	fi
 		return 0
 }