update change log

This allows us to get rid of the sleep call in the stop function. Also,
we set a configurable timeout value for stopping daemons.

BUSYBOX.md

@@ -0,0 +1,32 @@
+# Using Busybox as your Default Shell with OpenRC
+
+If you have/bin/sh linked to busybox, you need to be aware of several
+incompatibilities between busybox's applets and the standalone
+counterparts. Since it is possible to configure busybox to not include
+these applets or to prefer the standalone counterparts, OpenRC does not
+attempt to support the busybox applets.
+
+For now, it is recommended that you disable the following busybox
+configuration settings for best results with OpenRC.
+
+CONFIG_START_STOP_DAEMON -- The start-stop-daemon applet is not compatible with
+start-stop-daemon in OpenRC.
+
+CONFIG_MOUNT -- The mount applet does not support the -O [no]_netdev options to
+skip over or include network file systems when the -a option is present.
+
+CONFIG_UMOUNT -- The umount applet does not support the -O option along with -a.
+
+CONFIG_SWAPONOFF -- The swapon applet does not support the -e option
+or recognize the nofail option in fstab.
+
+CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
+
+CONFIG_IP -- The ip applet  doesn't support the "scope" modifier for
+"ip route add" and "ip address add".
+
+CONFIG_BB_SYSCTL -- The sysctl applet does not support the --system command
+line switch.
+
+There is work to get most of these supported by busybox, so this file
+will be updated as things change.

FEATURE-REMOVAL-SCHEDULE

@@ -1,49 +0,0 @@
-The following is a list of files and features that are going to be removed in
-the source tree.  Every entry should contain what exactly is going away, why it
-is happening, and who is going to be doing the work.  When the feature is
-removed, it should also be removed from this file.
-
----------------------------
-
-What: oldnet ADSL rp-pppoe mode
-
-When: undecided
-
-Why: Replaced by the oldnet PPP module
-
-Who:  Robin H. Johnson <robbat2@gentoo.org>
-
----------------------------
-
-What: oldnet /etc/conf.d/wireless
-
-When: undecided
-
-Why: All configuration moved to /etc/conf.d/net
-
-Who:  Robin H. Johnson <robbat2@gentoo.org>
-
----------------------------
-
-What: Service pause action
-
-When: Removed already, compatbility warning in place.
-
-Why: ...
-
-Who:
-
----------------------------
-
-What: Service --startas, --chuid , --oknodo
-
-When: undecided
-
-Why: Obsolete or replaced by other options.
-	 --startas => use --name or --exec
-	 --chuid => use --user
-	 --oknodo => ignore return code instead
-
-Who:
-
----------------------------

FEATURE-REMOVAL-SCHEDULE.md

@@ -0,0 +1,61 @@
+# Features Scheduled for Removal
+
+The following is a list of files and features that are going to be removed in
+the source tree.  Every entry should contain what exactly is going away, why it
+is happening, and who is going to be doing the work.  When the feature is
+removed, it should also be removed from this file.
+
+## Service pause action
+
+When: 1.0
+
+Why: The same affect can be obtained with the --nodeps option to stop.
+
+Who:
+
+## start-stop-daemon options --startas, --chuid , --oknodo
+
+When: 1.0
+
+Why: Obsolete or replaced by other options.
+
+* --startas => use --name or --exec
+* --chuid => use --user
+* --oknodo => ignore return code instead
+
+Who:
+
+## runscript and rc symbolic links
+
+When: 1.0
+
+Why: Deprecated in favor of openrc-run and openrc due to naming
+	 conflicts with other software.
+
+Who:
+
+## support for the opts variable in service scripts
+
+When: 1.0
+
+Why: Depprecated in favor of extra_commands, extra_started_commands
+	 and extra_stopped_commands.
+
+Who:
+
+## support for local_start and local_stop
+
+When: 1.0
+
+Why: Depprecated in favor of executable scripts in @SYSCONFDIR@/local.d
+
+Who:
+
+## the mtab service script
+
+When: make warnings more visible in 1.0, remove in 2.0
+
+Why: /etc/mtab should be a symbolic link to /proc/self/mounts on modern
+	 Linux systems
+
+Who:

HISTORY.md

@@ -0,0 +1,57 @@
+# OpenRC History
+
+This history of OpenRC was written by Daniel Robbins, Roy Marples, William
+Hubbs and others.
+
+The Gentoo modular init scripts were developed by Daniel Robbins for Gentoo
+Linux 1.0_rc6 during most of 2001 and released in September 2001. After their
+development, the dependency-based init script system was maintained by a
+number of senior developers, starting with Azarah (Martin Schlemmer), with
+migration to the new init system assisted by Woodchip (Donnie Davies) who
+converted all ebuild init scripts to work with the new system. As Grant
+Goodyear notes: 
+
+"My recollection is that one of woodchip's more impressive early feats
+was the complete replacement of all of the init scripts in Portage
+for Gentoo Linux 1.0_rc6. Through 1.0_rc5 Gentoo had used fairly
+standard rc scripts modified from Stampede Linux, but for 1.0_rc6 Daniel
+Robbins (drobbins) and Martin Schlemmer (azarah) had created a new
+dependency-based init script system that is still used today. Within a
+span of days Donny rewrote every single init script in the Portage tree
+and committed new masked packages to await the release of 1.0_rc6. Thanks to
+woodchip (and drobbins and azarah, of course) the
+transition to the new init scripts was nearly painless." [1] 
+
+Roy Marples became a Gentoo/Linux developer in 2004 and wrote the modular
+network scripts for the Gentoo baselayout package. Towards the end of 2005,
+he became the primary maintainer for baselayout and the init scripts. 
+
+At the start of 2007, He announced the ongoing development of
+baselayout-2, containing a rewritten core coded in C and allowing POSIX sh
+init scripts instead of forcing the use of bash. By mid 2007, He had
+re-implemented the Gentoo init script design created by Daniel Robbins,
+using an entirely new code base. Alpha and pre-release baselayout-2
+snapshots were added to Gentoo's Portage tree as an optional component.
+
+Toward the end of 2007, Roy retired as a Gentoo developer.
+Baselayout-2 was still in the pre stage, and aside from the gentoo-fbsd
+users, it was masked. However, He desired to keep the baselayout-2
+project moving forward as an independent project. The Gentoo Council
+permitted Him to release OpenRC under the 2-clause BSD license,
+managed by him as an external project. 
+
+Around mid-2010, Roy decided to no longer maintain OpenRC. At this
+point, he transferred development back to Gentoo.
+
+William Hubbs, and several other Gentoo developers,  started working on
+OpenRC around this point and brought OpenRC-0.8.x to Gentoo Linux's stable
+tree in 2011.
+
+In 2013 the OpenRC team became independent from Gentoo again and moved primary
+development to github.
+
+Daniel Robbins continues to maintain an independent, forked
+version of OpenRC for Funtoo Linux, which includes a Funtoo-specific network
+configuration system. 
+
+[1] http://www.gentoo.org/news/en/gwn/20040426-newsletter.xml

Makefile

@@ -2,15 +2,13 @@
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-include Makefile.inc
+TOP:=		${dir ${realpath ${firstword ${MAKEFILE_LIST}}}}
+MK=			${TOP}/mk
+
+include ${TOP}/Makefile.inc
 
 SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
 
-# Build our old net foo or not
-ifeq (${MKNET},oldnet)
-SUBDIR+=	net doc
-endif
-
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes
 ifeq (${MKPKGCONFIG},yes)
@@ -22,12 +20,11 @@ SUBDIR+=	runlevels
 
 INSTALLAFTER=	_installafter
 
-MK= 		mk
 include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/git.mk
+include ${MK}/gitver.mk
 
 _installafter:
 ifeq (${MKPREFIX},yes)

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.11
+VERSION=	0.16.3
 PKG=		${NAME}-${VERSION}

NEWS.md

@@ -0,0 +1,63 @@
+# OpenRC NEWS
+
+This file will contain a list of notable changes for each release. Note
+the information in this file is in reverse order.
+
+## OpenRC-0.14
+
+The binfmt service, which registers misc binary formats with the Linux
+kernel, has been separated from the procfs service. This service will be
+automatically added to the boot runlevel for new Linux installs. When
+you upgrade, you will need to use rc-update to add it to your boot
+runlevel.
+
+The procfs service no longer automounts the deprecated usbfs and
+usbdevfs file systems. Nothing should be using usbdevfs any longer, and
+if you still need usbfs it can be added to fstab.
+
+Related to the above change, the procfs service no longer attempts to
+modprobe the usbcore module. If your device manager does not load it,
+you will need to configure the modules service to do so.
+
+The override order of binfmt.d and tmpfiles.d directories has been
+changed to match systemd. Files in /run/binfmt.d and /run/tmpfiles.d
+override their /usr/lib counterparts, and files in the /etc counterparts
+override both /usr/lib and /run.
+
+## OpenRC-0.13.2
+
+A chroot variable has been added to the service script variables.
+This fixes the support for running a service in a chroot.
+This is documented in man 8 openrc-run.
+
+The netmount service now mounts nfs file systems.
+This change was made to correct a fix for an earlier bug.
+
+## OpenRC-0.13
+
+/sbin/rc was renamed to /sbin/openrc and /sbin/runscript was renamed to
+/sbin/openrc-run due to naming conflicts with other software.
+
+Backward compatible symbolic links are currently in place so your
+system will keep working if you are using the old names; however, it is
+strongly advised that you migrate to the new names because the symbolic
+links will be removed in the future.
+Warnings have been added to assist with this migration; however, due to the
+level of noise they produce, they only appear in verbose mode in this release.
+
+The devfs script now handles the initial mounting and setup of the
+/dev directory. If /dev has already been mounted by the kernel or an
+initramfs, devfs will remount /dev with the correct mount options
+instead of mounting a second /dev over the existing mount point.
+
+It attempts to mount /dev from fstab first if an entry exists there. If
+it doesn't it attempts to mount devtmpfs if it is configured in the
+kernel. If not, it attempts to mount tmpfs.
+If none of these is available, an error message is displayed and static
+/dev is assumed.
+
+## OpenRC-0.12
+
+The net.* scripts, originally from Gentoo Linux, have
+been removed. If you need these scripts, look for a package called
+netifrc, which is maintained by them.

README

@@ -1,88 +0,0 @@
-OpenRC README
-
-
-Installation
-------------
-make install
-Yup, that simple. Works with GNU make.
-
-You may wish to tweak the installation with the below arguments
-PROGLDFLAGS=-static
-LIBNAME=lib64
-DESTDIR=/tmp/openrc-image
-MKNET=oldnet
-MKPAM=pam
-MKPREFIX=yes
-MKPKGCONFIG=no
-MKSELINUX=yes
-MKSTATICLIBS=no
-MKTERMCAP=ncurses
-MKTERMCAP=termcap
-PKG_PREFIX=/usr/pkg
-LOCAL_PREFIX=/usr/local
-PREFIX=/usr/local
-
-We don't support building a static OpenRC with PAM.
-You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
-If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
-so that all malloc memory should be freed at exit.
-If you are building OpenRC for a Gentoo Prefix installation, add
-MKPREFIX=yes.
-
-You can also brand OpenRC if you so wish like so
-BRANDING=\"Gentoo/$(uname -s)\"
-
-PKG_PREFIX should be set to where packages install to by default.
-LOCAL_PREFIX should be set when to where user maintained packages are.
-Only set LOCAL_PREFIX if different from PKG_PREFIX.
-PREFIX should be set when OpenRC is not installed to /.
-
-If any of the following files exist then we do not overwrite them
-/etc/devd.conf
-/etc/rc
-/etc/rc.shutdown
-/etc/conf.d/*
-
-rc and rc.shutdown are the hooks from the BSD init into OpenRC.
-devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
-hook into OpenRC.
-inittab is the same, but for SysVInit as used by most Linux distributions.
-This can be found in the support folder.
-Obviously, if you're installing this onto a system that does not use OpenRC
-by default then you may wish to backup the above listed files, remove them
-and then install so that the OS hooks into OpenRC.
-
-init.d.misc is not installed by default as the scripts will need
-tweaking on a per distro basis. They are also non essential to the operation
-of the system.
-
-
-Reporting Bugs
---------------
-Since Gentoo Linux is hosting OpenRC development, Bugs should go to
-the Gentoo Bugzilla:
-	http://bugs.gentoo.org/
-They should be filed under the "Gentoo Hosted Projects" product and
-the "openrc" component.
-
-
-History - by Roy Marples
-------------------------
-I became a Gentoo/Linux developer in 2004 and wrote the modular network
-scripts for the Gentoo baselayout package. baselayout is a collection of
-bash scripts to bring up your computer and its services.
-Then towards the end of 2005 I found myself as the primary maintainer
-for baselayout.
-
-At the start of 2007, baselayout-2 is announced to the world, re-writing the
-core of baselayout in C and allowing POSIX sh init scripts instead of
-forcing the use of bash. By Mid 2007 I have re-written everything, including
-init scripts, and alpha and pre baselayout-2 snapshots where put into Gentoo.
-Towards the end of 2007 I retired as a Gentoo developer for reasons I won't
-go into here. baselayout-2 was still in the pre stage, and aside from the
-fbsd users, it was masked everywhere. However, I also desired to keep the
-baselayout-2 project alive, but outside of Gentoo and into other projects
-such as FreeBSD.
-
-As such, the Gentoo Council have allowed the creation of OpenRC under the
-2 clause BSD license, managed by me as an external project.

README.md

@@ -0,0 +1,99 @@
+# OpenRC README
+
+OpenRC is a dependency-based init system that works with the
+system-provided init program, normally `/sbin/init`. Currently, it does
+not have an init program of its own.
+
+## Installation
+
+OpenRC requires GNU make.
+
+Once you have GNU Make installed, the default OpenRC installation can be
+executed using this command:
+
+make install
+
+## Configuration
+
+You may wish to configure the installation by passing one or more of the
+below arguments to the make command
+
+```
+PROGLDFLAGS=-static
+LIBNAME=lib64
+DESTDIR=/tmp/openrc-image
+MKNET=no
+MKPAM=pam
+MKPREFIX=yes
+MKPKGCONFIG=no
+MKSELINUX=yes
+MKSTATICLIBS=no
+MKTERMCAP=ncurses
+MKTERMCAP=termcap
+MKTOOLS=yes
+PKG_PREFIX=/usr/pkg
+LOCAL_PREFIX=/usr/local
+PREFIX=/usr/local
+BRANDING=\"Gentoo/$(uname -s)\"
+```
+
+## Notes
+
+We don't support building a static OpenRC with PAM.
+
+You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`.
+
+If you debug memory under valgrind, add `-DDEBUG_MEMORY`
+to your `CPPFLAGS` so that all malloc memory should be freed at exit.
+
+If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`.
+
+`PKG_PREFIX` should be set to where packages install to by default.
+
+`LOCAL_PREFIX` should be set when to where user maintained packages are.
+Only set `LOCAL_PREFIX` if different from `PKG_PREFIX`.
+
+`PREFIX` should be set when OpenRC is not installed to /.
+
+If any of the following files exist then we do not overwrite them
+
+```
+/etc/devd.conf
+/etc/rc
+/etc/rc.shutdown
+/etc/conf.d/*
+```
+
+`rc` and `rc.shutdown` are the hooks from the BSD init into OpenRC.
+
+`devd.conf` is modified from FreeBSD to call `/etc/rc.devd` which is a
+generic hook into OpenRC.
+
+`inittab` is the same, but for SysVInit as used by most Linux distributions.
+This can be found in the support folder.
+
+Obviously, if you're installing this onto a system that does not use
+OpenRC by default then you may wish to backup the above listed files,
+remove them and then install so that the OS hooks into OpenRC.
+
+`init.d.misc` is not installed by default as the scripts will need
+tweaking on a per distro basis. They are also non essential to the
+operation of the system.
+
+## Reporting Bugs
+
+If you are using Gentoo Linux, bugs can be filed on their bugzilla under
+the `gentoo hosted projects` product and the `openrc` component [1].
+Otherwise, you can report issues on our github [2].
+
+Better yet, if you can contribute code, please feel free to submit pull
+requests [3].
+
+## IRC Channel
+
+We have an official irc channel, #openrc on freenode, feel free to join
+us there.
+
+[1]	https://bugs.gentoo.org/
+[2]	https://github.com/openrc/openrc/issues
+[3]	https://github.com/openrc/openrc/pulls

README.newnet

@@ -1,7 +1,3 @@
-The following applies only to the newnet stack, which is not presently
-maintained in OpenRC. The oldnet stack is maintained instead.
-- Robin H. Johnson <robbat2@gentoo.org>, 2011/02/21
-
 OpenRC Network Ideals
 ---------------------
 

STYLE-GUIDE.md

@@ -1,23 +1,23 @@
+# OpenRC Style Guide
+
 This is the openrc style manual.  It governs the coding style of all code
 in this repository.  Follow it.  Contact openrc@gentoo.org for any questions
 or fixes you might notice.
 
-##########
+## C CODE
-# C CODE #
-##########
 
-The BSD Kernel Normal Form (KNF) style is used:
+The BSD Kernel Normal Form (KNF) style is used [1]. Basically, it is like
-	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
+K&R/LKML, but wrapped lines that are indented use 4 spaces. Here are the
-Basically, it's like K&R/LKML, but wrapped lines that are indented use 4 spaces.
+highlights.
 
-Highlights:
+- no trailing whitespace
-	- no trailing whitespace
+- indented code use tabs (not line wrapped)
-	- indented code use tabs (not line wrapped)
+- cuddle the braces (except for functions)
-	- cuddle the braces (except for functions)
+- space after native statements and before paren (for/if/while/...)
-	- space after native statements and before paren (for/if/while/...)
+- no space between function and paren
-	- no space between function and paren
+- pointer asterisk cuddles the variable, not the type
-	- pointer asterisk cuddles the variable, not the type
 
+```
 void foo(int c)
 {
 	int ret = 0;
@@ -32,16 +32,15 @@ void foo(int c)
 
 	return ret;
 }
+```
 
-##################
+## COMMIT MESSAGES
-# COMMIT MESSAGES #
-##################
 
 The following is an example of a correctly formatted git commit message
 for this repository. Most of this information came from this blog post
-[1], so I would like to thank the author.
+[2], so I would like to thank the author.
 
-### cut here ###
+```
 Capitalized, short (50 chars or less) summary
 
 More detailed explanatory text, if necessary.  Wrap it to about 72
@@ -51,7 +50,7 @@ line separating the summary from the body is critical (unless you omit
 the body entirely); tools like rebase can get confused if you run the
 two together.
 
-Write your commit message in the present tense: "Fix bug" and not "Fixed
+Write your commit message in the imperative: "Fix bug" and not "Fixed
 bug."  This convention matches up with commit messages generated by
 commands like git merge and git revert.
 
@@ -67,7 +66,7 @@ Further paragraphs come after blank lines.
 Reported-by: User Name <email>
 X-[Distro]-Bug: BugID
 X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
-### cut here ###
+```
 
 If you did not write the code and the patch does not include authorship
 information in a format git can use, please use the --author option of the
@@ -81,5 +80,5 @@ different from the author and committer.
   *BSD. Also, [Distro] should be replaced with the name of the
   distribution, e.g. X-Gentoo-Bug.
 
-[1] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
+[1]	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
-
+[2] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html

conf.d/Makefile

@@ -1,7 +1,10 @@
-DIR=	${CONFDIR}
+include ../mk/net.mk
-CONF=	bootmisc fsck hostname localmount urandom tmpfilesd ${CONF-${OS}}
 
-ifeq (${MKNET},)
+DIR=	${CONFDIR}
+CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
+		${CONF-${OS}}
+
+ifeq (${MKNET},yes)
 CONF+= network staticroute
 TARGETS+=	network staticroute
 CLEANFILES+=	network staticroute
@@ -12,7 +15,7 @@ include ${MK}/os.mk
 
 CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
 
-CONF-Linux=	consolefont dmesg hwclock keymaps killprocs modules
+CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules
 
 CONF-NetBSD=	moused rarpd savecore
 

conf.d/devfs

@@ -0,0 +1,8 @@
+# OpenRC will attempt each of the following in succession to mount /dev.
+#
+# 1. If there is an entry for /dev in fstab, it will be used.
+# 2. If devtmpfs is defined in the kernel, it will be used.
+# 3. If tmpfs is defined in the kernel, it will be used.
+#
+# Set this to yes if you do not want OpenRC to attempt to mount /dev.
+# skip_mount_dev="NO"

conf.d/hwclock

@@ -7,8 +7,8 @@ clock="UTC"
 # If you want the hwclock script to set the system time (software clock)
 # to match the current hardware clock during bootup, leave this
 # commented out.
-# However, you can set this to "NO" ifyou are running a modern kernel
+# However, you can set this to "NO" if you are running a modern kernel
-# with CONFIG_RTC_HCTOSYS set to y and your hardware clock set to UTC.
+# and using NTP to synchronize your system clock.
 #clock_hctosys="YES"
 
 # If you do not want to set the hardware clock to the current system

conf.d/keymaps

@@ -18,6 +18,6 @@ extended_keymaps=""
 # For a list of valid sets, run `dumpkeys --help`
 dumpkeys_charset=""
 
-# Some fonts map AltGr-E to the currency symbol ¤ instead of the Euro €
+# Some fonts map AltGr-E to the currency symbol instead of the Euro.
 # To fix this, set to "yes"
 fix_euro="NO"

conf.d/net

@@ -1,4 +0,0 @@
-# This blank configuration will automatically use DHCP for any net.*
-# scripts in /etc/init.d.  To create a more complete configuration,
-# please review /usr/share/doc/openrc*/net.example* and save your configuration
-# in /etc/conf.d/net (this file :]!).

conf.d/netmount

@@ -0,0 +1,40 @@
+# You will need to set the dependencies in the netmount script to match
+# the network configuration tools you are using. This should be done in
+# this file by following the examples below, and not by changing the
+# service script itself.
+#
+# Each of these examples is meant to be used separately. So, for
+# example, do not set rc_need to something like "net.eth0 dhcpcd".
+#
+# If you are using newnet and configuring your interfaces with static
+# addresses with the network script, you  should use this setting.
+#
+#rc_need="network"
+#
+# If you are using oldnet, you must list the specific net.* services you
+# need.
+#
+# This example assumes all of your netmounts can be reached on
+# eth0.
+#
+#rc_need="net.eth0"
+#
+# This example assumes some of your netmounts are on eth1 and some
+# are on eth2.
+#
+#rc_need="net.eth1 net.eth2"
+#
+# If you are using a dynamic network management tool like
+# networkmanager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
+# manage the network interfaces with the routes to your netmounts, you
+# should list that tool.
+#
+#rc_need="networkmanager"
+#rc_need="dhcpcd"
+#rc_need="wicd"
+#
+# The default setting is designed to be backward compatible with our
+# current setup, but you are highly discouraged from using this. In
+# other words, please change it to be more suited to your system.
+#
+rc_need="net"

conf.d/network.GNU-kFreeBSD.in

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"

conf.d/network.GNU.in

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"

conf.d/network.in

@@ -7,7 +7,7 @@
 # You also have ifup_eth0 and ifdown_eth0 to run other commands when
 # eth0 is started and stopped.
 # You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set shutdown_network=YES
+# If you really need this, then set keep_network=NO
 
 # Lastly, the interfaces variable pulls in virtual interfaces that cannot
 # be automatically detected.

conf.d/staticroute.GNU-kFreeBSD.in

@@ -0,0 +1,5 @@
+# Separate multiple routes using ; or new lines.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
+#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"

conf.d/staticroute.GNU.in

@@ -0,0 +1,7 @@
+# Separate multiple routes using ; or new lines.
+# /etc/route.conf(5) takes precedence over this configuration.
+
+# Example static routes. See route(8) for syntax.
+# FIXME: "net ..." not supported
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"

doc/.gitignore

@@ -1 +0,0 @@
-net.example

doc/Makefile

@@ -1,11 +0,0 @@
-DIR=	${DOCDIR}/openrc
-SRCS=	net.example.in
-INC=	net.example
-
-MK=	../mk
-include ${MK}/os.mk
-
-%.example.in: %.example${SFX}
-	${CP} $< $@
-
-include ${MK}/scripts.mk

doc/net.example.BSD.in

@@ -1,442 +0,0 @@
-##############################################################################
-# QUICK-START
-#
-# The quickest start is if you want to use DHCP.
-# In that case, everything should work out of the box, no configuration
-# necessary, though the startup script will warn you that you haven't
-# specified anything.
-
-# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6
-# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have
-# the relevant kernel option enabled. So if you don't have an IPv6 enabled
-# kernel then remove the IPv6 address from your config.
-
-# If you want to use a static address or use DHCP explicitly, jump
-# down to the section labeled INTERFACE HANDLERS.
-#
-# If you want to do anything more fancy, you should take the time to
-# read through the rest of this file.
-
-##############################################################################
-# MODULES
-#
-# We now support modular networking scripts which means we can easily
-# add support for new interface types and modules while keeping
-# compatibility with existing ones.
-#
-# Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have its package installed
-# then you get an error stating which package you need to install.
-# Ideally, you only use the modules setting when you have two or more
-# packages installed that supply the same service.
-#
-# In other words, you probably should DO NOTHING HERE...
-
-##############################################################################
-# INTERFACE HANDLERS
-
-# For a static configuration, use something like this
-#config_eth0="192.168.0.2/24"
-
-# If you need more than one address, you can use something like this
-# NOTE: ifconfig creates an aliased device for each extra IPv4 address
-#       (eth0:1, eth0:2, etc)
-#       iproute2 does not do this as there is no need to
-#config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
-
-# You can also use IPv6 addresses
-# (you should always specify a prefix length with IPv6 here)
-#config_eth0="192.168.0.2/24 4321:0:1:2:3:4:567:89ab/64 4321:0:1:2:3:4:567:89ac/64"
-
-# If you wish to keep existing addresses + routing and the interface is up,
-# you can specify a noop (no operation). If the interface is down or there
-# are no addresses assigned, then we move onto the next step (default dhcp)
-# This is useful when configuring your interface with a kernel command line
-# or similar
-#config_eth0="noop 192.168.0.2/24"
-
-# If you don't want ANY address (only useful when calling for advanced stuff)
-#config_eth0="null"
-
-# Here's how to do routing if you need it
-# We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route
-#routes_eth0="default via 192.168.0.1
-#10.0.0.0/8 via 192.168.0.1
-#::/0"
-
-# If a specified module fails (like dhcp - see below), you can specify a
-# fallback like so
-#fallback_eth0="192.168.0.2 netmask 255.255.255.0"
-#fallback_routes_eth0="default via 192.168.0.1"
-
-# NOTE: fallback entry must match the entry location in config_eth0
-# As such you can only have one fallback route.
-# Also, if you do not set a fallback_routes entry for an interface, the
-# routes entry will be used if that is set.
-
-# Some users may need to alter the MTU - here's how
-#mtu_eth0="1500"
-
-# Most drivers that report carrier status function correctly, but some do not
-# One of these faulty drivers is for the Intel e1000 network card, but only
-# at boot time. To get around this you may alter the carrier_timeout value for
-# the interface. -1 is disable, 0 is infinite and any other number of seconds
-# is how long we wait for carrier. The current default is 3 seconds
-#carrier_timeout_eth0=-1
-
-# You may wish to disable the interface being brought down when stopping.
-# This is only of use for WakeOnLan.
-#ifdown_eth0="NO"
-
-##############################################################################
-# OPTIONAL MODULES
-
-#-----------------------------------------------------------------------------
-# WIRELESS (802.11 support)
-# Wireless can be provided by BSDs ifconfig (iwconfig) or wpa_supplicant
-# wpa_supplicant is preferred, use the modules directive to prefer iwconfig.
-#modules="iwconfig"
-
-# ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
-# that scans, associates and re-configures if association is lost.
-# We call it iwconfig to separate the wireless setup from ifconfig.
-####################################
-# HINTS
-#
-# Most users will just need to set the following options
-# key_SSID1="s:yourkeyhere enc open" # s: means a text key
-# key_SSID2="aaaa-bbbb-cccc-dd"      # no s: means a hex key
-# preferred_aps="SSID1 SSID2"
-#
-# Clear? Good. Now configure your wireless network below
-
-####################################
-# SETTINGS
-# Hard code an SSID to an interface - leave this unset if you wish the driver
-# to scan for available Access Points
-# I would only set this as a last resort really - use the preferred_aps
-# setting at the bottom of this file
-#essid_eth0='foo'
-
-# Some drivers/hardware don't scan all that well. We have no control over this
-# but we can say how many scans we want to do to try and get a better sweep of
-# the area. The default is 1.
-#scans_eth0="1"
-
-#Channel can be set (1-14), but defaults to 3 if not set.
-#
-# The below is taken verbatim from the BSD wavelan documentation found at
-# http://www.netbsd.org/Documentation/network/wavelan.html
-# There are 14 channels possible; We are told that channels 1-11 are legal for
-# North America, channels 1-13 for most of Europe, channels 10-13 for France,
-# and only channel 14 for Japan. If in doubt, please refer to the documentation
-# that came with your card or access point. Make sure that the channel you
-# select is the same channel your access point (or the other card in an ad-hoc
-# network) is on. The default for cards sold in North America and most of Europe
-# is 3; the default for cards sold in France is 11, and the default for cards
-# sold in Japan is 14.
-#channel_eth0="3"
-
-# Setup any other config commands. This is basically the ifconfig argument
-# without the ifconfig $iface.
-#ifconfig_eth0=""
-# You can do the same per SSID too.
-#ifconfig_SSID=""
-
-# Seconds to wait until associated. The default is to wait 10 seconds.
-# 0 means wait indefinitely. WARNING: this can cause an infinite delay when
-# booting.
-#associate_timeout_eth0="5"
-
-# Define a WEP key per SSID or MAC address (of the AP, not your card)
-# The encryption type (open or restricted) must match the
-# encryption type on the Access Point.
-# To set a hex key, prefix with 0x
-#key_SSID="0x12341234123412341234123456"
-# or you can use strings. Passphrase IS NOT supported
-#key_SSID="foobar"
-#key_SSID="foobar"
-
-# WEP key for the AP with MAC address 001122334455
-#mac_key_001122334455="foobar"
-
-# You can also override the interface settings found in /etc/conf.d/net
-# per SSID - which is very handy if you use different networks a lot
-#config_SSID="dhcp"
-#routes_SSID=
-#fallback_SSID=
-
-# Setting name/domain server causes /etc/resolv.conf to be overwritten
-# Note that if DHCP is used, and you want this to take precedence then
-# please put -R in your dhcpcd options
-#dns_servers_SSID="192.168.0.1 192.168.0.2"
-#dns_domain_SSID="some.domain"
-#dns_search_SSID="search.this.domain search.that.domain"
-# Please check the man page for resolv.conf for more information
-# as domain and search (searchdomains) are mutually exclusive and
-# searchdomains takes precedence
-
-# You can also set any of the /etc/conf.d/net variables per MAC address
-# incase you use Access Points with the same SSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#config_001122334455="dhcp"
-#dns_servers_001122334455="192.168.0.1 192.168.0.2"
-
-# Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting its SSID
-# WARNING: This will override the SSID being broadcast due to some
-# Access Points sending an SSID even when they have been configured
-# not to!
-# Change 001122334455 to the MAC address and SSID to the SSID
-# it should map to
-#mac_essid_001122334455="SSID"
-
-# This lists the preferred SSIDs to connect to in order
-# SSID's can contain any characters here as they must match the broadcast
-# SSID exactly.
-# Surround each SSID with the " character and separate them with a space
-# If the first SSID isn't found then it moves onto the next
-# If this isn't defined then it connects to the first one found
-#preferred_aps="SSID1 SSID2"
-
-# You can also define a preferred_aps list per interface
-#preferred_aps_eth0="SSID3 SSID4"
-
-# You can also say whether we only connect to preferred APs or not
-# Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly"
-# and "forceany"
-# "any" means it will connect to visible APs in the preferred list and then
-# any other available AP
-# "preferredonly" means it will only connect to visible APs in the preferred
-# list
-# "forcepreferred" means it will forcibly connect to APs in order if it does
-# not find them in a scan
-# "forcepreferredonly" means it forcibly connects to the APs in order and
-# does not bother to scan
-# "forceany" does the same as forcepreferred + connects to any other
-# available AP
-# Default is "any"
-#associate_order="any"
-#associate_order_eth0="any"
-
-# You can define blacklisted Access Points in the same way
-#blacklist_aps="SSID1 SSID2"
-#blacklist_aps_eth0="SSID3 SSID4"
-
-# If you have more than one wireless card, you can say if you want
-# to allow each card to associate with the same Access Point or not
-# Values are "yes" and "no"
-# Default is "yes"
-#unique_ap="yes"
-#unique_ap_eth0="yes"
-
-# IMPORTANT: preferred_only, blacklisted_aps and unique_ap only work when
-# essid_eth0 is not set and your card is capable of scanning
-
-# NOTE: preferred_aps  list ignores blacklisted_aps - so if you have
-# the same SSID in both, well, you're a bit silly :p
-
-##################################################
-# wpa_supplicant
-# emerge net-wireless/wpa_supplicant
-# Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Consult the wpa_supplicant.conf.example that is installed in
-# /usr/share/doc/wpa_supplicant
-
-# By default we don't wait for wpa_supplicant to associate and authenticate.
-# If you would like to, so can specify how long in seconds
-#associate_timeout_eth0=60
-# A value of 0 means wait forever.
-
-# You can also override any settings found here per SSID - which is very
-# handy if you use different networks a lot. See below for using the SSID
-# in our variables
-#config_SSID="dhcp"
-# See the System module below for setting dns/nis/ntp per SSID
-
-# You can also override any settings found here per MAC address of the AP
-# in case you use Access Points with the same SSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#mac_config_001122334455="dhcp"
-#mac_dns_servers_001122334455="192.168.0.1 192.168.0.2"
-
-# When an interface has been associated with an Access Point, a global
-# variable called SSID is set to the Access Point's SSID for use in the
-# pre/post user functions below (although it's not available in preup as you
-# won't have associated then)
-
-# If you're using anything else to configure wireless on your interface AND
-# you have installed wpa_supplicant, you need to disable wpa_supplicant
-#modules="!iwconfig !wpa_supplicant"
-#or
-#modules="!wireless"
-
-##############################################################################
-# WIRELESS SSID IN VARIABLES
-##############################################################################
-# Remember to change SSID to your SSID.
-# Say that your SSID is My NET - the line
-#      #key_SSID="s:passkey"
-# becomes
-#      #key_My_NET="s:passkey"
-# Notice that the space has changed to an underscore - do the same with all
-# characters not in a-z A-Z (English alphabet) 0-9. This only applies to
-# variables and not values.
-#
-# Any SSID's in values like essid_eth0="My NET" may need to be escaped
-# This means placing the character \ before the character
-# \" need to be escaped for example
-# So if your SSID is
-#      My "\ NET
-# it becomes
-#      My \"\\ NET
-# for example
-#      #essid_eth0="My\"\\NET"
-#
-# So using the above we can use
-#      #dns_domain_My____NET="My\"\\NET"
-# which is an invalid dns domain, but shows the how to use the variable
-# structure
-#########################################################
-
-#-----------------------------------------------------------------------------
-# DHCP
-# DHCP can be provided by dhclient.
-#
-# dhcpcd:   emerge net-misc/dhcpcd
-# dhclient: emerge net-misc/dhcp
-
-# Regardless of which DHCP client you prefer, you configure them the
-# same way using one of following depending on which interface modules
-# you're using.
-#config_eth0="dhcp"
-
-# For passing custom options to dhcpcd use something like the following.  This
-# example reduces the timeout for retrieving an address from 60 seconds (the
-# default) to 10 seconds.
-#dhcpcd_eth0="-t 10"
-
-# GENERIC DHCP OPTIONS
-# Set generic DHCP options like so
-#dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
-
-# This tells the dhcp client to release its lease when it stops, not to
-# overwrite dns, ntp and nis settings, not to set a default route and not to
-# send the current hostname to the dhcp server and when it starts.
-# You can use any combination of the above options - the default is not to
-# use any of them.
-
-
-#-----------------------------------------------------------------------------
-# System
-# For configuring system specifics such as domain, dns, ntp and nis servers
-# It's rare that you would need todo this, but you can anyway.
-# This is most benefit to wireless users who don't use DHCP so they can change
-# their configs based on SSID.
-
-# If you omit the _eth0 suffix, then it applies to all interfaces unless
-# overridden by the interface suffix.
-#dns_domain_eth0="your.domain"
-#dns_servers_eth0="192.168.0.2 192.168.0.3"
-#dns_search_eth0="this.domain that.domain"
-#dns_options_eth0="timeout:1 rotate"
-#dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0"
-# See the man page for resolv.conf for details about the options and sortlist
-# directives
-
-#ntp_servers_eth0="192.168.0.2 192.168.0.3"
-
-#nis_domain_eth0="domain"
-#nis_servers_eth0="192.168.0.2 192.168.0.3"
-
-# NOTE: Setting any of these will stamp on the files in question. So if you
-# don't specify dns_servers but you do specify dns_domain then no nameservers
-# will be listed in /etc/resolv.conf even if there were any there to start
-# with.
-# If this is an issue for you then maybe you should look into a resolv.conf
-# manager like resolvconf-gentoo to manage this file for you. All packages
-# that baselayout supports use resolvconf-gentoo if installed.
-
-#-----------------------------------------------------------------------------
-# Cable in/out detection
-# Sometimes the cable is in, others it's out. Obviously you don't want to
-# restart net.eth0 every time when you plug it in either.
-# BSD has the Device State Change Daemon - or devd for short
-# To enable this,  simple add devd to the boot runlevel
-#rc-update add devd boot
-#rc
-
-##############################################################################
-# ADVANCED CONFIGURATION
-#
-# Four functions can be defined which will be called surrounding the
-# start/stop operations.  The functions are called with the interface
-# name first so that one function can control multiple adapters. An extra two
-# functions can be defined when an interface fails to start or stop.
-#
-# The return values for the preup and predown functions should be 0
-# (success) to indicate that configuration or deconfiguration of the
-# interface can continue.  If preup returns a non-zero value, then
-# interface configuration will be aborted.  If predown returns a
-# non-zero value, then the interface will not be allowed to continue
-# deconfiguration.
-#
-# The return values for the postup, postdown, failup and faildown functions are
-# ignored since there's nothing to do if they indicate failure.
-#
-# ${IFACE} is set to the interface being brought up/down
-# ${IFVAR} is ${IFACE} converted to variable name bash allows
-#
-# For historical and compatibility reasons, preup is actually normally called
-# in the following sequence: up ; preup ; up.
-# The first up causes the kernel to initialize the device, so
-# that it is available for use in the preup function.  However, for some
-# hardware, e.g. CAN devices, some configuration is needed before trying to up
-# the interface will actually work. For such hardware, the
-# up_before_preup variables will allow skipping the first up call if set
-# to yes.
-#up_before_preup_IFVAR="NO"
-#up_before_preup="NO"
-
-#preup() {
-#	# Remember to return 0 on success
-#	return 0
-#}
-
-#predown() {
-#	# The default in the script is to test for NFS root and disallow
-#	# downing interfaces in that case.  Note that if you specify a
-#	# predown() function you will override that logic.  Here it is, in
-#	# case you still want it...
-#	if is_net_fs /; then
-#		eerror "root filesystem is network mounted -- can't stop ${IFACE}"
-#		return 1
-#	fi
-#
-#	# Remember to return 0 on success
-#	return 0
-#}
-
-#postup() {
-#	# This function could be used, for example, to register with a
-#	# dynamic DNS service.  Another possibility would be to
-#	# send/receive mail once the interface is brought up.
-
-#}
-
-#postdown() {
-#	# Return 0 always
-#	return 0
-#}
-
-#failup() {
-#       # This function is mostly here for completeness... I haven't
-#       # thought of anything nifty to do with it yet ;-)
-#}
-
-#faildown() {
-#       # This function is mostly here for completeness... I haven't
-#       # thought of anything nifty to do with it yet ;-)
-#}

etc/rc.conf.DragonFly

@@ -0,0 +1,13 @@
+##############################################################################
+# DragonFly BSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on DragonFly BSD:
+# ""        - nothing special
+# "jail"    - DragonFly BSD jails
+# "prefix"  - Prefix
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+

etc/rc.conf.GNU

@@ -0,0 +1,14 @@
+##############################################################################
+# GNU/Hurd SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on GNU/Hurd:
+# ""        - nothing special
+# "subhurd" - Hurd subhurds (to be checked)
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+#rc_tty_number=6?

etc/rc.conf.GNU-kFreeBSD

@@ -0,0 +1,11 @@
+##############################################################################
+# GNU/kFreeBSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on GNU/kFreeBSD:
+# ""        - nothing special
+# "jail"    - FreeBSD jails (not yet implemented)
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""

etc/rc.conf.Linux

@@ -2,14 +2,15 @@
 # LINUX SPECIFIC OPTIONS
 
 # This is the subsystem type. Valid options on Linux:
-# ""        - nothing special
+# ""               - nothing special
-# "lxc"     - Linux Containers
+# "lxc"            - Linux Containers
-# "openvz"  - Linux OpenVZ
+# "openvz"         - Linux OpenVZ
-# "prefix"  - Prefix
+# "prefix"         - Prefix
-# "uml"     - Usermode Linux
+# "uml"            - Usermode Linux
-# "vserver" - Linux vserver
+# "vserver"        - Linux vserver
-# "xen0"    - Xen0 Domain
+# "systemd-nspawn" - Container created by the systemd-nspawn utility
-# "xenU"    - XenU Domain
+# "xen0"           - Xen0 Domain
+# "xenU"           - XenU Domain
 # If this is commented out, automatic detection will be used.
 #
 # This should be set to the value representing the environment this file is
@@ -20,10 +21,59 @@
 # consolefont, numlock, etc ...)
 rc_tty_number=12
 
+##############################################################################
+# CGROUPS RESOURCE MANAGEMENT
+
 # If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controler is mounted under
+# whether or not a group for each controller is mounted under
 # /sys/fs/cgroup.
-# Support for process management by cgroups is planned in the future,
+# None of the other options in this section work if this is set to "NO".
-# so if you turn this off, be aware that you may not be able to use that
-# feature.
 #rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set this to YES if yu want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"

etc/rc.conf.in

@@ -51,6 +51,10 @@
 # The default value is: /var/log/rc.log
 #rc_log_path="/var/log/rc.log"
 
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
 #rc_env_allow="VAR1 VAR2"
@@ -73,6 +77,10 @@
 #rc_crashed_stop=NO
 #rc_crashed_start=YES
 
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
 ##############################################################################
 # MISC CONFIGURATION VARIABLES
 # There variables are shared between many init scripts
@@ -80,9 +88,13 @@
 # Set unicode to YES to turn on unicode support for keyboards and screens.
 #unicode="NO"
 
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but  it can be adjusted here.
+#rc_fuser_timeout=60
+
 # Below is the default list of network fstypes.
 #
-# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
 # nfs nfs4 ocfs2 shfs smbfs
 #
 # If you would like to add to this list, you can do so by adding your
@@ -94,10 +106,14 @@
 # These variables are documented here, but should be configured in
 # /etc/conf.d/foo for service foo and NOT enabled here unless you
 # really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
 
 # Some daemons are started and stopped via start-stop-daemon.
 # We can set some things on a per service basis, like the nicelevel.
-#export SSD_NICELEVEL="-19"
+#SSD_NICELEVEL="-19"
 
 # Pass ulimit parameters
 #rc_ulimit="-u 30"
@@ -116,6 +132,13 @@
 #rc_foo_need="openvpn"
 #rc_foo_after="clock"
 
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
 # You can also remove dependencies.
 # This is mainly used for saying which servies do NOT provide net.
 #rc_net_tap0_provide="!net"

etc/rc.devd

@@ -3,8 +3,9 @@
 # Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged
-export IN_BACKGROUND=yes
+IN_BACKGROUND=yes
-export IN_HOTPLUG=yes
+IN_HOTPLUG=yes
+export IN_BACKGROUND IN_HOTPLUG
 
 getmedia() {
 	ifconfig "$1" | while read line; do

etc/rc.in

@@ -4,15 +4,15 @@
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
+[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
 
 # Handle interrupts
 trap : SIGINT
 trap "echo 'Boot interrupted'; exit 1" SIGQUIT
 
-/sbin/rc sysinit || exit 1
+/sbin/openrc sysinit || exit 1
-/sbin/rc boot || exit 1
+/sbin/openrc boot || exit 1
-/sbin/rc default
+/sbin/openrc default
 
 # We don't actually care if rc default worked or not, we should exit 0
 # to allow logins

etc/rc.shutdown.in

@@ -7,11 +7,11 @@ trap : SIGINT SIGQUIT
 
 # Try and use stuff in /lib over anywhere else so we can shutdown
 # local mounts correctly.
-export LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}"
+LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}" ; export LD_LIBRARY_PATH
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
+[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
 
 action=${1:-shutdown}
-exec /sbin/rc "${action}"
+exec /sbin/openrc "${action}"

init.d.misc/avahi-dnsconfd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/avahid.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/dbus.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/dhcpcd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/dnsmasq.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/hald.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/named.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/ntpd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/openvpn.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -53,7 +53,7 @@ start_pre()
 			eend $?
 		fi
 	else
-		if type kldload >/dev/null 2>&1; then
+		if command -v kldload >/dev/null 2>&1; then
 			# Hammer the modules home by default
 			sysctl -a | grep -q '\.tun\.' || kldload if_tun
 			sysctl -a | grep -q '\.tap\.' || kldload if_tap

init.d.misc/polkitd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/sshd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/wpa_supplicant.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/.gitignore

@@ -3,9 +3,8 @@ fsck
 hostname
 local
 localmount
+loopback
 moused
-net.lo
-net.lo0
 netmount
 network
 root
@@ -24,6 +23,7 @@ modules
 mount-ro
 mtab
 numlock
+osclock
 procfs
 staticroute
 sysfs
@@ -41,5 +41,5 @@ syslogd
 termencoding
 ttys
 wscons
-tmpfilesd.boot
+tmpfiles.dev
-tmpfilesd.sysinit
+tmpfiles.setup

init.d/Makefile

@@ -1,24 +1,19 @@
+include ../mk/net.mk
+
 DIR=	${INITDIR}
-SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
+SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
-	root.in savecache.in swap.in swapfiles.in \
+	netmount.in osclock.in root.in savecache.in swap.in swapfiles.in \
-	tmpfilesd.boot.in tmpfilesd.sysinit.in \
+	tmpfiles.setup.in swclock.in sysctl.in urandom.in s6-svscan.in ${SRCS-${OS}}
-	swclock.in sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
-# Build our old net foo or not
+# Are we installing our network scripts?
-ifeq (${MKNET},)
+ifeq (${MKNET},yes)
 SRCS+= network.in staticroute.in
 endif
 
-ifeq (${MKNET},oldnet)
-INSTALLAFTER=	_installafter_net.lo
-SRCS+= net.lo.in
-endif
-
 MK=	../mk
 include ${MK}/os.mk
 
-NET_LO-FreeBSD=	net.lo0
 # Generic BSD scripts
 SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 		rpcbind.in savecore.in syslogd.in
@@ -26,12 +21,10 @@ SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
 		mixer.in nscd.in powerd.in syscons.in
 
-NET_LO-Linux=	net.lo
+SRCS-Linux=	binfmt.in devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
-SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
 		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
-		procfs.in sysfs.in termencoding.in
+		procfs.in sysfs.in termencoding.in tmpfiles.dev.in
 
-NET_LO-NetBSD=	net.lo0
 # Generic BSD scripts
 SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 		rpcbind.in savecore.in syslogd.in
@@ -44,6 +37,3 @@ SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
 include ${MK}/scripts.mk
 
 _installafter_: realinstall
-
-_installafter_net.lo: realinstall
-	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO-${OS}}

init.d/adjkerntz.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/binfmt.in

@@ -0,0 +1,20 @@
+#!@SBINDIR@/openrc-run
+# Copyright 2015 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+description="Register misc binary format handlers"
+
+depend()
+{
+	after procfs
+	use modules devfs
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+	ebegin "Loading custom binary format handlers"
+	"$RC_LIBEXECDIR"/sh/binfmt.sh
+	eend $?
+return 0
+}

init.d/bootmisc.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -6,7 +6,7 @@ depend()
 {
 	need localmount
 	before logger
-	after clock sysctl
+	after clock root sysctl
 	keyword -prefix -timeout
 }
 
@@ -27,9 +27,9 @@ cleanup_tmp_dir()
 		ebegin "Wiping $dir directory"
 
 		# Faster than raw find
-		if ! rm -rf -- [^ajlq\.]* 2>/dev/null ; then
+		if ! rm -rf -- [!ajlq\.]* 2>/dev/null ; then
 			# Blah, too many files
-			find . -maxdepth 1 -name '[^ajlq\.]*' -exec rm -rf -- {} +
+			find . -maxdepth 1 -name '[!ajlq\.]*' -exec rm -rf -- {} +
 		fi
 
 		# pam_mktemp creates a .private directory within which
@@ -59,6 +59,34 @@ cleanup_tmp_dir()
 	fi
 }
 
+cleanup_var_run_dir()
+{
+	ebegin "Cleaning /var/run"
+	for x in $(find /var/run ! -type d ! -name utmp \
+		! -name random-seed ! -name dev.db \
+		! -name ld-elf.so.hints ! -name ld.so.hints);
+	do
+		# Clean stale sockets
+		if [ -S "$x" ]; then
+			if command -v fuser >/dev/null 2>&1; then
+				fuser "$x" >/dev/null 2>&1 || rm -- "$x"
+			else
+				rm -- "$x"
+			fi
+		fi
+		[ ! -f "$x" ] && continue
+		# Do not remove pidfiles of already running daemons
+		case "$x" in
+			*.pid)
+				start-stop-daemon --test --quiet \
+				--stop --pidfile "$x" && continue
+			;;
+		esac
+		rm -f -- "$x"
+	done
+	eend 0
+}
+
 mkutmp()
 {
 	: >"$1"
@@ -87,10 +115,44 @@ migrate_to_run()
  	fi
 }
 
+clean_run()
+{
+	[ "$RC_SYS" = VSERVER -o "$RC_SYS" = LXC ] && return 0
+	local dir
+	# If / is still read-only due to a problem, this will fail!
+	if ! checkpath -W /; then
+		eerror "/ is not writable; unable to clean up underlying /run"
+		return 1
+	fi
+	if ! checkpath -W /tmp; then
+		eerror "/tmp is not writable; unable to clean up underlying /run"
+		return 1
+	fi
+	# Now we know that we can modify /tmp and /
+	# if mktemp -d fails, it returns an EMPTY string
+	# STDERR: mktemp: failed to create directory via template ‘/tmp/tmp.XXXXXXXXXX’: Read-only file system
+	# STDOUT: ''
+	rc=0
+	dir=$(mktemp -d)
+	if [ -n "$dir" -a -d $dir -a -w $dir ]; then
+		mount --bind / $dir && rm -rf $dir/run/* || rc=1
+		umount $dir
+		rm -rf $dir
+	else
+		rc=1
+	fi
+	if [ $rc -ne 0 ]; then
+		eerror "Could not clean up underlying /run on /"
+		return 1
+	fi
+}
+
 start()
 {
 	# Remove any added console dirs
-	rm -rf "$RC_LIBEXECDIR"/console/*
+	if checkpath -W "$RC_LIBEXECDIR"; then
+		rm -rf "$RC_LIBEXECDIR"/console/*
+	fi
 
 	local logw=false runw=false extra=
 	# Ensure that our basic dirs exist
@@ -115,6 +177,7 @@ start()
 	if [ "$RC_UNAME" = Linux -a -d /run ]; then
 		migrate_to_run	/var/lock /run/lock
 		migrate_to_run	/var/run /run
+		clean_run
 	fi
 
 	if checkpath -W /var/run; then
@@ -127,36 +190,13 @@ start()
 		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
 		eend 0
 
-		ebegin "Cleaning /var/run"
+		mountinfo -q -f tmpfs /var/run || cleanup_var_run_dir
-		for x in $(find /var/run ! -type d ! -name utmp \
-			! -name random-seed ! -name dev.db \
-			! -name ld-elf.so.hints ! -name ld.so.hints);
-		do
-			# Clean stale sockets
-			if [ -S "$x" ]; then
-				if type fuser >/dev/null 2>&1; then
-					fuser "$x" >/dev/null 2>&1 || rm -- "$x"
-				else
-					rm -- "$x"
-				fi
-			fi
-			[ ! -f "$x" ] && continue
-			# Do not remove pidfiles of already running daemons
-			case "$x" in
-				*.pid)
-					start-stop-daemon --test --quiet \
-					--stop --pidfile "$x" && continue
-				;;
-			esac
-			rm -f -- "$x"
-		done
-		eend 0
 	fi
 
 	# Clean up /tmp directories
 	local tmp=
 	for tmp in ${clean_tmp_dirs:-${wipe_tmp_dirs-/tmp}}; do
-		cleanup_tmp_dir "$tmp"
+		mountinfo -q -f tmpfs "$tmp" || cleanup_tmp_dir "$tmp"
 	done
 
 	if checkpath -W /tmp; then
@@ -174,7 +214,7 @@ start()
 	if yesno $log_dmesg; then
 		if $logw || checkpath -W /var/log; then
 			# Create an 'after-boot' dmesg log
-			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
+			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ -a "$RC_SYS" != LXC ]; then
 				dmesg > /var/log/dmesg
 				chmod 640 /var/log/dmesg
 			fi

init.d/consolefont.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 start()
@@ -53,14 +53,10 @@ start()
 	done
 	eend $retval
 
-	# Store the last font so we can use it ASAP on boot
+	# Store the font so we can use it ASAP on boot
 	if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then
 		mkdir -p "$RC_LIBEXECDIR"/console
-		for font in /usr/share/consolefonts/"$consolefont".*; do
+		setfont -O "$RC_LIBEXECDIR"/console/font
-			:
-		done
-		cp "$font" "$RC_LIBEXECDIR"/console
-		echo "${font##*/}" >"$RC_LIBEXECDIR"/console/font
 	fi
 
 	return $retval

init.d/devd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/devdb.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/devfs.in

@@ -1,20 +1,86 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-description="Mount system critical filesystems in /dev."
+description="Set up the /dev directory"
 
-depend() {
+depend()
-	use dev-mount udev-mount
+{
-	before udev mdev
+	provide dev-mount
-	keyword -prefix -vserver
+	before dev
+	keyword -prefix -systemd-nspawn -vserver -lxc
 }
 
-start() {
+mount_dev()
-	# Mount required stuff as user may not have then in /etc/fstab
+{
+	local action=--mount devfstype msg=Mounting
+	# Some devices require exec, Bug #92921
+	local mountopts="exec,nosuid,mode=0755"
+	if yesno ${skip_mount_dev:-no} ; then
+		einfo "/dev will not be mounted due to user request"
+		return 0
+	fi
+	if mountinfo -q /dev; then
+		action=--remount
+		mountopts="remount,$mountopts"
+		msg=Remounting
+	fi
+	if fstabinfo -q /dev; then
+		ebegin "$msg /dev according to @SYSCONFDIR@/fstab"
+		fstabinfo -q $action /dev
+		eend $?
+		return 0
+	fi
+	if grep -q devtmpfs /proc/filesystems; then
+		devfstype=devtmpfs
+		mountopts="$mountopts,size=10M"
+	elif grep -q tmpfs /proc/filesystems; then
+		devfstype=tmpfs
+		mountopts="$mountopts,size=10M"
+	fi
+	if [ -n "$devfstype" ]; then
+		ebegin "$msg $devfstype on /dev"
+		mount -n -t $devfstype -o $mountopts dev /dev
+		eend $?
+	else
+		ewarn "This kernel does not have devtmpfs or tmpfs support, and there"
+		ewarn "is no entry for /dev in fstab."
+		ewarn "This means /dev will not be mounted."
+		ewarn "To avoid this message, set CONFIG_DEVTMPFS or CONFIG_TMPFS to y"
+		ewarn "in your kernel configuration or see @SYSCONFDIR@/conf.d/devfs"
+	fi
+	return 0
+}
+
+seed_dev()
+{
+	# Seed /dev with some things that we know we need
+
+	# creating /dev/console, /dev/tty and /dev/tty1 to be able to write
+	# to $CONSOLE with/without bootsplash before udevd creates it
+	[ -c /dev/console ] || mknod -m 600 /dev/console c 5 1
+	[ -c /dev/tty1 ] || mknod -m 620 /dev/tty1 c 4 1
+	[ -c /dev/tty ] || mknod -m 666 /dev/tty c 5 0
+
+	# udevd will dup its stdin/stdout/stderr to /dev/null
+	# and we do not want a file which gets buffered in ram
+	[ -c /dev/null ] || mknod -m 666 /dev/null c 1 3
+
+	# so udev can add its start-message to dmesg
+	[ -c /dev/kmsg ] || mknod -m 660 /dev/kmsg c 1 11
+
+	# extra symbolic links not provided by default
+	[ -e /dev/fd ] || ln -snf /proc/self/fd /dev/fd
+	[ -e /dev/stdin ] || ln -snf /proc/self/fd/0 /dev/stdin
+	[ -e /dev/stdout ] || ln -snf /proc/self/fd/1 /dev/stdout
+	[ -e /dev/stderr ] || ln -snf /proc/self/fd/2 /dev/stderr
+	[ -e /proc/kcore ] && ln -snf /proc/kcore /dev/core
+
+	# Mount required directories as user may not have them in /etc/fstab
 	for x in \
+		"mqueue /dev/mqueue 1777 ,nodev mqueue" \
 		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
-		"tmpfs /dev/shm 1777 ,nodev shm" \
+		"tmpfs /dev/shm 1777 ,nodev,mode=1777 shm" \
 	; do
 		set -- $x
 		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
@@ -33,5 +99,23 @@ start() {
 			eend $?
 		fi
 	done
+}
+
+restorecon_dev()
+{
+	if [ -x /sbin/restorecon ]; then
+		ebegin "Restoring SELinux contexts in /dev"
+		restorecon -rF /dev >/dev/null 2>&1
+		eend $?
+	fi
+
+	return 0
+}
+
+start()
+{
+	mount_dev
+	seed_dev
+	restorecon_dev
 	return 0
 }

init.d/dmesg.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,7 +7,7 @@ description="Set the dmesg level for a cleaner boot"
 depend()
 {
 	before dev modules
-	keyword -lxc -prefix -vserver
+	keyword -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/dumpon.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/encswap.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright 1992-2012 FreeBSD Project
 # Released under the 2-clause BSD license
 

init.d/fsck.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -9,7 +9,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -timeout -vserver -lxc
+	keyword -jail -openvz -prefix -systemd-nspawn -timeout -vserver -lxc -uml
 }
 
 _abort() {
@@ -71,14 +71,12 @@ start()
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
-		local skiptypes x
+		local skiptypes
-		for x in $net_fs_list $extra_net_fs_list; do
+		skiptypes=$(printf 'no%s,' ${net_fs_list} ${extra_net_fs_list})
-			skiptypes="${skiptypes}no${x},"
+		[ "${skiptypes}" = "no," ] && skiptypes=""
-		done
+		fsck_opts="$fsck_opts -C0 -T -t ${skiptypes}noopts=_netdev"
-		skiptypes="${skiptypes}noopts=_netdev"
-		fsck_opts="$fsck_opts -C0 -T -t $skiptypes"
 		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
-			fsck_args=${fsck_args--A -p}
+			fsck_args=${fsck_args:--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
 				fsck_opts="$fsck_opts -R"
@@ -87,7 +85,7 @@ start()
 	fi
 
 	trap : INT QUIT
-	fsck ${fsck_args--p} $fsck_opts "$@"
+	fsck ${fsck_args:--p} $fsck_opts "$@"
 	case $? in
 	0)	eend 0; return 0;;
 	1)	ewend 1 "Filesystems repaired"; return 0;;

init.d/hostid.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -40,7 +40,7 @@ reset()
 {
 	local uuid= x="[0-9a-f]" y="$x$x$x$x"
 
-	if type kenv >/dev/null 2>&1; then
+	if command -v kenv >/dev/null 2>&1; then
 		uuid=$(kenv smbios.system.uuid 2>/dev/null)
 	fi
 	case "$uuid" in

init.d/hostname.in

@@ -1,16 +1,18 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -prefix -lxc
+	keyword -prefix -systemd-nspawn -lxc
 }
 
 start()
 {
-	hostname=${hostname-${HOSTNAME-localhost}}
+	# HOSTNAME variable used to be defined in caps in conf.d/hostname.
+	# It is also a magic variable in bash.
+	hostname=${hostname-${HOSTNAME-localhost}} # checkbashisms: false positive
 	ebegin "Setting hostname to $hostname"
 	hostname "$hostname"
 	eend $? "Failed to set the hostname"

init.d/hwclock.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -28,7 +28,7 @@ depend()
 	else
 		before *
 	fi
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 setupopts()
@@ -83,22 +83,17 @@ start()
 		fi
 	fi
 
+	# Always set the kernel's time zone.
+	_hwclock --systz $utc_cmd $clock_args
+	: $(( retval += $? ))
+
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
 		_hwclock --adjust $utc_cmd
 		: $(( retval += $? ))
 	fi
 
-	# If setting UTC, don't bother to run hwclock when first booting
+	if yesno ${clock_hctosys:-YES}; then
-	# as that's the default
+		_hwclock --hctosys $utc_cmd $clock_args
-	if [ "$PREVLEVEL" != N -o \
-		"$utc_cmd" != --utc -o \
-		-n "$clock_args" ];
-	then
-		if yesno ${clock_hctosys:-YES}; then
-			_hwclock --hctosys $utc_cmd $clock_args
-		else
-			_hwclock --systz $utc_cmd $clock_args
-		fi
 		: $(( retval += $? ))
 	fi
 

init.d/ipfw.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -8,7 +8,7 @@ ipfw_ip_in=${ipfw_ip_in-any}
 ipfw_ports_in=${ipfw_ports_in-auth ssh}
 ipfw_ports_nolog=${ipfw_ports_nolog-135-139,445 1026,1027 1433,1434}
 
-opts="panic showstatus"
+extra_commands="panic showstatus"
 
 depend() {
 	before net

init.d/keymaps.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 start()
@@ -58,7 +58,7 @@ start()
 	if yesno $fix_euro; then
 		ebegin "Fixing font for euro symbol"
 		# Fix some fonts displaying the Euro, #173528.
-		echo "altgr keycode 18 = U+20AC" | loadkeys -q
+		echo "altgr keycode 18 = U+20AC" | loadkeys -q -
 		eend $?
 	fi
 

init.d/killprocs.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/local.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -12,40 +12,75 @@ depend()
 
 start()
 {
-	einfo "Starting local"
+	ebegin "Starting local"
 
-	local file
+	local file has_errors=0 redirect retval
-	for file in @SYSCONFDIR@/local.d/*.start ; do
+	yesno $rc_verbose || redirect='> /dev/null 2>&1'
-		[ -x "$file" ] && "$file"
+	eindent
+	for file in @SYSCONFDIR@/local.d/*.start; do
+		if [ -x "${file}" ]; then
+			vebegin "Executing \"${file}\""
+			eval "${file}" $redirect
+			retval=$?
+			if [ ${retval} -ne 0 ]; then
+				has_errors=1
+			fi
+			veend ${retval} "Execution of \"${file}\" failed."
+		fi
 	done
+	eoutdent
 
-	if type local_start >/dev/null 2>&1; then
+	if command -v local_start >/dev/null 2>&1; then
-		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
+		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
 		ewarn "Please move the code from the local_start function"
-		ewarn "to scripts with an .start extension"
+		ewarn "to executable scripts with an .start extension"
-		ewarn "in @SYSCONFDIR@/local.d"
+		ewarn "in \"@SYSCONFDIR@/local.d\""
 		local_start
 	fi
 
-	eend 0
+	eend ${has_errors}
+
+	# We have to end with a zero exit code, because a failed execution
+	# of an executable @SYSCONFDIR@/local.d/*.start file shouldn't result in
+	# marking the local service as failed. Otherwise we are unable to
+	# execute any executable @SYSCONFDIR@/local.d/*.stop file, because a failed
+	# marked service cannot be stopped (and the stop function would
+	# actually call the executable @SYSCONFDIR@/local.d/*.stop file(s)).
+	return 0
 }
 
 stop()
 {
-	einfo "Stopping local"
+	ebegin "Stopping local"
 
-	local file
+	local file has_errors=0 redirect retval
+	yesno $rc_verbose || redirect='> /dev/null 2>&1'
+	eindent
 	for file in @SYSCONFDIR@/local.d/*.stop; do
-		[ -x "$file" ] && "$file"
+		if [ -x "${file}" ]; then
+			vebegin "Executing \"${file}\""
+			eval "${file}" $redirect
+			retval=$?
+			if [ ${retval} -ne 0 ]; then
+				has_errors=1
+			fi
+			veend ${retval} "Execution of \"${file}\" failed."
+		fi
 	done
+	eoutdent
 
-	if type local_start >/dev/null 2>&1; then
+	if command -v local_stop >/dev/null 2>&1; then
-		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
+		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
 		ewarn "Please move the code from the local_stop function"
-		ewarn "to scripts with an .stop extension"
+		ewarn "to executable scripts with an .stop extension"
-		ewarn "in @SYSCONFDIR@/local.d"
+		ewarn "in \"@SYSCONFDIR@/local.d\""
 		local_stop
 	fi
 
-	eend 0
+	eend ${has_errors}
+
+	# An executable @SYSCONFDIR@/local.d/*.stop file which failed with a
+	# non-zero exit status is not a reason to mark this service
+	# as failed, therefore we have to end with a zero exit code.
+	return 0
 }

init.d/localmount.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -9,7 +9,7 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword -jail -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()
@@ -17,11 +17,14 @@ start()
 	# Mount local filesystems in /etc/fstab.
 	local types="noproc" x= no_netdev=
 	for x in $net_fs_list $extra_net_fs_list; do
-		types="${types},${x}"
+		types="${types},no${x}"
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
 		no_netdev="-O no_netdev"
+		if mountinfo -q /usr; then
+			touch "$RC_SVCDIR"/usr_premounted
+		fi
 	fi
 	ebegin "Mounting local filesystems"
 	mount -at "$types" $no_netdev
@@ -37,7 +40,7 @@ stop()
 	# We never unmount / or /dev or $RC_SVCDIR
 
 	# Bug 381783
-	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+	local rc_svcdir=$(printf '%s\n' "$RC_SVCDIR" | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
 
 	local x= no_umounts_r="/|/dev|/dev/.*|${rc_svcdir}"
 	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib(32|64)?|/libexec"
@@ -48,15 +51,43 @@ stop()
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
-		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*|/usr"
+		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
+		if [ -e "$rc_svcdir"/usr_premounted ]; then
+			no_umounts_r="$no_umounts_r|/usr"
+		fi
 	fi
 	no_umounts_r="^($no_umounts_r)$"
 
 	# Flush all pending disk writes now
-	sync; sync
+	sync
 
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
+	if [ "$RC_UNAME" = Linux ] && [ -d /sys/fs/aufs ] ; then
+		#if / is aufs we remount it noxino during shutdown
+		if mountinfo -q -f '^aufs$' / ; then
+			mount -o remount,noxino,rw /
+			sync
+		fi
+
+		local aufs_branch aufs_mount_dir aufs_mount_point aufs_si_dir aufs_si_id
+		for aufs_si_dir in /sys/fs/aufs/*; do
+			aufs_mount_dir=${aufs_si_dir#/sys/fs/aufs/}
+			aufs_si_id="$(printf "%s" $aufs_mount_dir | sed 's/_/=/g')"
+			aufs_mount_point="$(mountinfo -o ${aufs_si_id})"
+			for x in $aufs_si_dir/br[0-9][0-9][0-9]; do
+				aufs_branch=$(sed 's/=.*//g' $x)
+				eindent
+				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
+					ewarn "Failed to remove branch $aufs_branch from aufs \
+						$aufs_mount_point"
+				fi
+				eoutdent
+				sync
+			done
+		done
+	fi
+
 	# Umount loop devices
 	einfo "Unmounting loop devices"
 	eindent

init.d/loopback.in

@@ -0,0 +1,35 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2013 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+description="Configures the loopback interface."
+
+depend()
+{
+	keyword -jail -prefix -systemd-nspawn -vserver
+}
+
+start()
+{
+	if [ "$RC_UNAME" = Linux ]; then
+		ebegin "Bringing up network interface lo"
+		if command -v ip > /dev/null 2>&1; then
+			ip addr add 127.0.0.1/8 dev lo brd + scope host
+			ip route add 127.0.0.0/8 dev lo scope host
+			ip link set lo up
+		else
+			ifconfig lo 127.0.0.1 netmask 255.0.0.0
+			route add -net 127.0.0.0 netmask 255.0.0.0 gw 127.0.0.1
+		fi
+	else
+		ebegin "Bringing up network interface lo0"
+		ifconfig lo0 127.0.0.1 netmask 255.0.0.0
+		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 127.0.0.1
+	fi
+	eend $?
+}
+
+stop()
+{
+	return 0
+}

init.d/mixer.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/modules.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,7 +7,7 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -vserver -lxc
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/mount-ro.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,7 +7,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 depend()
 {
 	need killprocs savecache
-	keyword -openvz -prefix -vserver -lxc
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()
@@ -15,7 +15,7 @@ start()
 	local ret=0
 
 	# Flush all pending disk writes now
-	sync; sync
+	sync
 
 	ebegin "Remounting remaining filesystems read-only"
 	# We need the do_unmount function

init.d/moused.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/mtab.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,30 +7,35 @@ description="Update /etc/mtab to match what the kernel knows about"
 depend()
 {
 	need root
-	keyword -prefix
+	keyword -prefix -systemd-nspawn
 }
 
 start()
 {
-	if [ -L /etc/mtab ]
+	[ -L /etc/mtab ] && return 0
-	then
+	local rc=0
-		einfo "Skipping mtab update (mtab is a symbolic link)"
-		return 0
-	fi
-
 	ebegin "Updating /etc/mtab"
-	if ! echo 2>/dev/null >/etc/mtab; then
+	if ! checkpath -W /etc; then
-		ewend 1 "/etc/mtab is not updateable"
+		rc=1
-		return 0
+	elif [ ! -e /etc/mtab ]; then
+		ln -snf /proc/self/mounts /etc/mtab
+	else
+		ewarn "The support for updating /etc/mtab as a file is"
+		ewarn "deprecated and will be removed in the future."
+		ewarn "Please run the following command as root on your system."
+		ewarn
+		ewarn "ln -snf /proc/self/mounts /etc/mtab"
+		ewarn
+
+		# With / as tmpfs we cannot umount -at tmpfs in localmount as that
+		# makes / readonly and dismounts all tmpfs even if in use which is
+		# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
+		# which allows this hack to work.
+		grep -v "^[! ]* / tmpfs " /proc/mounts > /etc/mtab
+
+		# Remove stale backups
+		rm -f /etc/mtab~ /etc/mtab~~
 	fi
-
+	eend $rc "/etc is not writable; unable to create /etc/mtab"
-	# With / as tmpfs we cannot umount -at tmpfs in localmount as that
+	return 0
-	# makes / readonly and dismounts all tmpfs even if in use which is
-	# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
-	# which allows this hack to work.
-	grep -v "^[^ ]* / tmpfs " /proc/mounts > /etc/mtab
-
-	# Remove stale backups
-	rm -f /etc/mtab~ /etc/mtab~~
-	eend 0
 }

init.d/net.lo.in

@@ -1,772 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-MODULESDIR="${RC_LIBEXECDIR}/net"
-MODULESLIST="${RC_SVCDIR}/nettree"
-_config_vars="config routes"
-
-[ -z "${IN_BACKGROUND}" ] && IN_BACKGROUND="NO"
-
-description="Configures network interfaces."
-
-# Handy var so we don't have to embed new lines everywhere for array splitting
-__IFS="
-"
-depend()
-{
-	local IFACE=${RC_SVCNAME#*.}
-	local IFVAR=$(shell_var "${IFACE}")
-
-	need localmount
-	if [ "$RC_UNAME" = Linux -a "$IFACE" != lo ]; then
-		need sysfs
-	fi
-	after bootmisc
-	keyword -jail -prefix -vserver
-
-	case "${IFACE}" in
-		lo|lo0) ;;
-		*)
-			after net.lo net.lo0 dbus
-			provide net
-			;;
-	esac
-
-	if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then
-		depend_${IFVAR}
-	fi
-
-	local dep= prov=
-	for dep in need use before after provide keyword; do
-		eval prov=\$rc_${dep}_${IFVAR}
-		if [ -n "${prov}" ]; then
-			${dep} ${prov}
-			ewarn "rc_${dep}_${IFVAR} is deprecated."
-			ewarn "Please use rc_net_${IFVAR}_${dep} instead."
-		fi
-	done
-}
-
-# Support bash arrays - sigh
-_array_helper()
-{
-	local _a=
-
-	eval _a=\$$1
-	_a=$(echo "${_a}" | sed -e 's:^[[:space:]]*::' -e 's:[[:space:]]*$::' -e '/^$/d' -e 's:[[:space:]]\{1,\}: :g')
-
-	[ -n "${_a}" ] && printf "%s\n" "${_a}"
-}
-
-_get_array()
-{
-	local _a=
-	if [ -n "${BASH}" ]; then
-		case "$(declare -p "$1" 2>/dev/null)" in
-			"declare -a "*)
-				ewarn "You are using a bash array for $1."
-				ewarn "This feature will be removed in the future."
-				ewarn "Please see net.example for the correct format for $1."
-				eval "set -- \"\${$1[@]}\""
-				for _a; do
-					printf "%s\n" "${_a}"
-				done
-				return 0
-				;;
-		esac
-	fi
-
-	_array_helper $1
-}
-
-# Flatten bash arrays to simple strings
-_flatten_array()
-{
-	if [ -n "${BASH}" ]; then
-		case "$(declare -p "$1" 2>/dev/null)" in
-			"declare -a "*)
-				ewarn "You are using a bash array for $1."
-				ewarn "This feature will be removed in the future."
-				ewarn "Please see net.example for the correct format for $1."
-				eval "set -- \"\${$1[@]}\""
-				for x; do
-					printf "'%s' " "$(printf "$x" | sed "s:':'\\\'':g")"
-				done
-				return 0
-				;;
-		esac
-	fi
-
-	_array_helper $1
-}
-
-_wait_for_carrier()
-{
-	local timeout= efunc=einfon
-
-	_has_carrier  && return 0
-
-	eval timeout=\$carrier_timeout_${IFVAR}
-	timeout=${timeout:-${carrier_timeout:-5}}
-
-	# Incase users don't want this nice feature ...
-	[ ${timeout} -le 0 ] && return 0
-
-	yesno ${RC_PARALLEL} && efunc=einfo
-	${efunc} "Waiting for carrier (${timeout} seconds) "
-	while [ ${timeout} -gt 0 ]; do
-		sleep 1
-		if _has_carrier; then
-			[ "${efunc}" = "einfon" ] && echo
-			eend 0
-			return 0
-		fi
-		: $(( timeout -= 1 ))
-		[ "${efunc}" = "einfon" ] && printf "."
-	done
-
-	[ "${efunc}" = "einfon" ] && echo
-	eend 1
-	return 1
-}
-
-_netmask2cidr()
-{
-	# Some shells cannot handle hex arithmetic, so we massage it slightly
-	# Buggy shells include FreeBSD sh, dash and busybox.
-	# bash and NetBSD sh don't need this.
-	case $1 in
-		0x*)
-		local hex=${1#0x*} quad=
-		while [ -n "${hex}" ]; do
-			local lastbut2=${hex#??*}
-			quad=${quad}${quad:+.}0x${hex%${lastbut2}*}
-			hex=${lastbut2}
-		done
-		set -- ${quad}
-		;;
-	esac
-
-	local i= len=
-	local IFS=.
-	for i in $1; do
-		while [ ${i} -ne 0 ]; do
-			: $(( len += i % 2 ))
-			: $(( i >>= 1 ))
-		done
-	done
-
-	echo "${len}"
-}
-
-_configure_variables()
-{
-	local var= v= t=
-
-	for var in ${_config_vars}; do
-		local v=
-		for t; do
-			eval v=\$${var}_${t}
-			if [ -n "${v}" ]; then
-				eval ${var}_${IFVAR}=\$${var}_${t}
-				continue 2
-			fi
-		done
-	done
-}
-
-_which()
-{
-	local i OIFS
-	# Empty
-	[ -z "$1" ] && return
-	# check paths
-	OIFS="$IFS"
-	IFS=:
-	for i in $PATH ; do
-		[ -x $i/$1 ] && echo $i/$1 && break
-	done
-	IFS=$OIFS
-}
-
-# Like _which, but also consider shell builtins, and multiple alternatives
-_program_available()
-{
-	[ -z "$1" ] && return 0
-	local x=
-	for x; do
-		case "${x}" in
-			/*) [ -x "${x}" ] && break;;
-			*) type "${x}" >/dev/null 2>&1 && break;;
-		esac
-		unset x
-	done
-	[ -n "${x}" ] && echo $x && return 0
-	return 1
-}
-
-_show_address()
-{
-	einfo "received address $(_get_inet_address "${IFACE}")"
-}
-
-# Basically sorts our modules into order and saves the list
-_gen_module_list()
-{
-	local x= f= force=$1
-	if ! ${force} && [ -s "${MODULESLIST}" -a "${MODULESLIST}" -nt "${MODULESDIR}" ]; then
-		local update=false
-		for x in "${MODULESDIR}"/*.sh; do
-			[ -e "${x}" ] || continue
-			if [ "${x}" -nt "${MODULESLIST}" ]; then
-				update=true
-				break
-			fi
-		done
-		${update} || return 0
-	fi
-
-	einfo "Caching network module dependencies"
-	# Run in a subshell to protect the main script
-	(
-	after() {
-		eval ${MODULE}_after="\"\${${MODULE}_after}\${${MODULE}_after:+ }$*\""
-	}
-
-	before() {
-		local mod=${MODULE}
-		local MODULE=
-		for MODULE; do
-			after "${mod}"
-		done
-	}
-
-	program() {
-		if [ "$1" = "start" -o "$1" = "stop" ]; then
-			local s="$1"
-			shift
-			eval ${MODULE}_program_${s}="\"\${${MODULE}_program_${s}}\${${MODULE}_program_${s}:+ }$*\""
-		else
-			eval ${MODULE}_program="\"\${${MODULE}_program}\${${MODULE}_program:+ }$*\""
-		fi
-	}
-
-	provide() {
-		eval ${MODULE}_provide="\"\${${MODULE}_provide}\${${MODULE}_provide:+ }$*\""
-		local x
-		for x in $*; do
-			eval ${x}_providedby="\"\${${MODULE}_providedby}\${${MODULE}_providedby:+ }${MODULE}\""
-		done
-	}
-
-	for MODULE in "${MODULESDIR}"/*.sh; do
-		sh -n "${MODULE}" || continue
-		. "${MODULE}" || continue
-		MODULE=${MODULE#${MODULESDIR}/}
-		MODULE=${MODULE%.sh}
-		eval ${MODULE}_depend
-		MODULES="${MODULES} ${MODULE}"
-	done
-
-	VISITED=
-	SORTED=
-	visit() {
-		case " ${VISITED} " in
-			*" $1 "*) return;;
-		esac
-		VISITED="${VISITED} $1"
-
-		eval AFTER=\$${1}_after
-		for MODULE in ${AFTER}; do
-			eval PROVIDEDBY=\$${MODULE}_providedby
-			if [ -n "${PROVIDEDBY}" ]; then
-				for MODULE in ${PROVIDEDBY}; do
-					visit "${MODULE}"
-				done
-			else
-				visit "${MODULE}"
-			fi
-		done
-
-		eval PROVIDE=\$${1}_provide
-		for MODULE in ${PROVIDE}; do
-			visit "${MODULE}"
-		done
-
-		eval PROVIDEDBY=\$${1}_providedby
-		[ -z "${PROVIDEDBY}" ] && SORTED="${SORTED} $1"
-	}
-
-	for MODULE in ${MODULES}; do
-		visit "${MODULE}"
-	done
-
-	printf "" > "${MODULESLIST}"
-	i=0
-	for MODULE in ${SORTED}; do
-		eval PROGRAM=\$${MODULE}_program
-		eval PROGRAM_START=\$${MODULE}_program_start
-		eval PROGRAM_STOP=\$${MODULE}_program_stop
-		eval PROVIDE=\$${MODULE}_provide
-		echo "module_${i}='${MODULE}'" >> "${MODULESLIST}"
-		echo "module_${i}_program='${PROGRAM}'" >> "${MODULESLIST}"
-		echo "module_${i}_program_start='${PROGRAM_START}'" >> "${MODULESLIST}"
-		echo "module_${i}_program_stop='${PROGRAM_STOP}'" >> "${MODULESLIST}"
-		echo "module_${i}_provide='${PROVIDE}'" >> "${MODULESLIST}"
-		: $(( i += 1 ))
-	done
-	echo "module_${i}=" >> "${MODULESLIST}"
-	)
-
-	return 0
-}
-
-_load_modules()
-{
-	local starting=$1 mymods=
-
-	# Ensure our list is up to date
-	_gen_module_list false
-	if ! . "${MODULESLIST}"; then
-		_gen_module_list true
-		. "${MODULESLIST}"
-	fi
-
-	MODULES=
-	if [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		eval mymods=\$modules_${IFVAR}
-		[ -z "${mymods}" ] && mymods=${modules}
-	fi
-
-	local i=-1 x= mod= f= provides=
-	while true; do
-		: $(( i += 1 ))
-		eval mod=\$module_${i}
-		[ -z "${mod}" ] && break
-		[ -e "${MODULESDIR}/${mod}.sh" ] || continue
-
-		eval set -- \$module_${i}_program
-		if [ -n "$1" ]; then
-			if ! _program_available "$@" >/dev/null; then
-				vewarn "Skipping module $mod due to missing program: $@"
-				continue
-			fi
-		fi
-		if ${starting}; then
-			eval set -- \$module_${i}_program_start
-		else
-			eval set -- \$module_${i}_program_stop
-		fi
-		if [ -n "$1" ]; then
-			if ! _program_available "$@" >/dev/null; then
-				vewarn "Skipping module $mod due to missing program: $@"
-				continue
-			fi
-		fi
-
-		eval provides=\$module_${i}_provide
-		if ${starting}; then
-			case " ${mymods} " in
-				*" !${mod} "*) continue;;
-				*" !${provides} "*) [ -n "${provides}" ] && continue;;
-			esac
-		fi
-		MODULES="${MODULES}${MODULES:+ }${mod}"
-
-		# Now load and wrap our functions
-		if ! . "${MODULESDIR}/${mod}.sh"; then
-			eend 1 "${RC_SVCNAME}: error loading module \`${mod}'"
-			exit 1
-		fi
-
-		[ -z "${provides}" ] && continue
-
-		# Wrap our provides
-		local f=
-		for f in pre_start start post_start; do
-			eval "${provides}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
-		done
-
-		eval module_${mod}_provides="${provides}"
-		eval module_${provides}_providedby="${mod}"
-	done
-
-	# Wrap our preferred modules
-	for mod in ${mymods}; do
-		case " ${MODULES} " in
-			*" ${mod} "*)
-			eval x=\$module_${mod}_provides
-			[ -z "${x}" ] && continue
-			for f in pre_start start post_start; do
-				eval "${x}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
-			done
-			eval module_${x}_providedby="${mod}"
-			;;
-		esac
-	done
-
-	# Finally remove any duplicated provides from our list if we're starting
-	# Otherwise reverse the list
-	local LIST="${MODULES}" p=
-	MODULES=
-	if ${starting}; then
-		for mod in ${LIST}; do
-			eval x=\$module_${mod}_provides
-			if [ -n "${x}" ]; then
-				eval p=\$module_${x}_providedby
-				[ "${mod}" != "${p}" ] && continue
-			fi
-			MODULES="${MODULES}${MODULES:+ }${mod}"
-		done
-	else
-		for mod in ${LIST}; do
-			MODULES="${mod}${MODULES:+ }${MODULES}"
-		done
-	fi
-
-	veinfo "Loaded modules: ${MODULES}"
-}
-
-_load_config()
-{
-	local config="$(_get_array "config_${IFVAR}")"
-	local fallback="$(_get_array fallback_${IFVAR})"
-
-	config_index=0
-	local IFS="$__IFS"
-	set -- ${config}
-
-	# We should support a space separated array for cidr configs
-	# But only as long as they do not contain other parameters for the address
-	if [ $# = 1 ]; then
-		unset IFS
-		set -- ${config}
-		# Of course, we may have a single address added old style.
-		# If the NEXT argument is a v4 or v6 address, it's the next config.
-		# Otherwise, it's arguments to the first config...
-		if [ "${2#*.*}" = "${2}" -a "${2#*:*}" = "${2}" ]; then
-			# Not an IPv4/IPv6
-			local IFS="$__IFS"
-			set -- ${config}
-		fi
-	fi
-
-	# Ensure that loopback has the correct address
-	if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then
-		if [ "$1" != "null" ]; then
-		   	config_0="127.0.0.1/8"
-			config_index=1
-		fi
-	else
-		if [ -z "$1" ]; then
-			ewarn "No configuration specified; defaulting to DHCP"
-			config_0="dhcp"
-			config_index=1
-		fi
-	fi
-
-
-	# We store our config in an array like vars
-	# so modules can influence it
-	for cmd; do
-		eval config_${config_index}="'${cmd}'"
-		: $(( config_index += 1 ))
-	done
-	# Terminate the list
-	eval config_${config_index}=
-
-	config_index=0
-	for cmd in ${fallback}; do
-		eval fallback_${config_index}="'${cmd}'"
-		: $(( config_index += 1 ))
-	done
-	# Terminate the list
-	eval fallback_${config_index}=
-
-	# Don't set to zero, so any net modules don't have to do anything extra
-	config_index=-1
-}
-
-# Support functions
-_run_if()
-{
-	local cmd=$1 iface=$2 ifr=${IFACE} ifv=${IFVAR}
-	# Ensure that we don't stamp on real values
-	local IFACE= IFVAR=
-	shift
-	if [ -n "${iface}" ]; then
-		IFACE="${iface}"
-		[ "${iface}" != "${ifr}" ] && IFVAR=$(shell_var "${IFACE}")
-	else
-		IFACE=${ifr}
-		IFVAR=${ifv}
-	fi
-	${cmd}
-}
-interface_exists()
-{
-	_run_if _exists "$@"
-}
-interface_up()
-{
-	_run_if _up "$@"
-}
-interface_down()
-{
-	_run_if _down "$@"
-}
-
-start()
-{
-	local IFACE=${RC_SVCNAME#*.} oneworked=false fallback=false module=
-	local IFVAR=$(shell_var "${IFACE}") cmd= our_metric=
-	local metric=0 _up_before_preup
-	eval _up_before_preup="\$up_before_preup_${IFVAR}"
-	[ -z "${_up_before_preup}" ] && _up_before_preup=$up_before_preup
-
-	einfo "Bringing up interface ${IFACE}"
-	eindent
-
-	if [ -z "${MODULES}" ]; then
-		local MODULES=
-		_load_modules true
-	fi
-
-	# We up the iface twice if we have a preup to ensure it's up if
-	# available in preup and afterwards incase the user inadvertently
-	# brings it down
-	if [ "$(command -v preup)" = "preup" ]; then
-		yesno "${_up_before_preup:-yes}" && _up 2>/dev/null
-		ebegin "Running preup"
-		eindent
-		preup || return 1
-		eoutdent
-	fi
-
-	_up 2>/dev/null
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_pre_start")" = "${module}_pre_start" ]; then
-			${module}_pre_start || exit $?
-		fi
-	done
-
-	if ! _exists; then
-		eerror "ERROR: interface ${IFACE} does not exist"
-		eerror "Ensure that you have loaded the correct kernel module for your hardware"
-		return 1
-	fi
-
-	if ! _wait_for_carrier; then
-		if service_started devd; then
-			ewarn "no carrier, but devd will start us when we have one"
-			mark_service_inactive "${RC_SVCNAME}"
-		else
-			eerror "no carrier"
-		fi
-		return 1
-	fi
-
-	local config= config_index=
-	_load_config
-	config_index=0
-
-	eval our_metric=\$metric_${IFVAR}
-	if [ -n "${our_metric}" ]; then
-		metric=${our_metric}
-	elif [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		: $(( metric += $(_ifindex) ))
-	fi
-
-	while true; do
-		eval config=\$config_${config_index}
-		[ -z "${config}" ] && break
-
-		set -- ${config}
-		if [ "$1" != "null" -a "$1" != "noop" ]; then
-			ebegin "$1"
-		fi
-		eindent
-		case "$1" in
-			noop)
-				if [ -n "$(_get_inet_address)" ]; then
-					oneworked=true
-					break
-				fi
-				;;
-			null) :;;
-			[0-9]*|*:*) _add_address ${config};;
-			*)
-				if [ "$(command -v "${config}_start")" = "${config}_start" ]; then
-					"${config}"_start
-				else
-					eerror "nothing provides \`${config}'"
-				fi
-				;;
-		esac
-		if eend $?; then
-			oneworked=true
-		else
-			eval config=\$fallback_${config_index}
-			if [ -n "${config}" ]; then
-				fallback=true
-				eoutdent
-				ewarn "Trying fallback configuration ${config}"
-				eindent
-				eval config_${config_index}=\$config
-				unset fallback_${config_index}
-				: $(( config_index -= 1 ))
-			fi
-		fi
-		eoutdent
-		: $(( config_index += 1 ))
-	done
-
-	if ! ${oneworked}; then
-		if [ "$(command -v failup)" = "failup" ]; then
-			ebegin "Running failup"
-			eindent
-			failup
-			eoutdent
-		fi
-		return 1
-	fi
-
-	local hidefirstroute=false first=true routes=
-	if ${fallback}; then
-		routes="$(_get_array "fallback_routes_${IFVAR}")"
-	fi
-	if [ -z "${routes}" ]; then
-		routes="$(_get_array "routes_${IFVAR}")"
-	fi
-	if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then
-		if [ "${config_0}" != "null" ]; then
-			routes="127.0.0.0/8 via 127.0.0.1
-${routes}"
-			hidefirstroute=true
-		fi
-	fi
-
-	local OIFS="${IFS}" SIFS="${IFS-y}"
-	local IFS="$__IFS"
-	for cmd in ${routes}; do
-		unset IFS
-		if ${first}; then
-			first=false
-			einfo "Adding routes"
-		fi
-		eindent
-		ebegin ${cmd}
-		# Work out if we're a host or a net if not told
-		case ${cmd} in
-			-net" "*|-host" "*);;
-			*" "netmask" "*)                   cmd="-net ${cmd}";;
-			*.*.*.*/32*)                       cmd="-host ${cmd}";;
-			*.*.*.*/*|0.0.0.0|0.0.0.0" "*)     cmd="-net ${cmd}";;
-			default|default" "*)               cmd="-net ${cmd}";;
-			*)                                 cmd="-host ${cmd}";;
-		esac
-		if ${hidefirstroute}; then
-			_add_route ${cmd} >/dev/null 2>&1
-			hidefirstroute=false
-		else
-			_add_route ${cmd} >/dev/null
-		fi
-		eend $?
-		eoutdent
-	done
-	if [ "${SIFS}" = "y" ]; then
-		unset IFS
-	else
-		IFS="${OIFS}"
-	fi
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_post_start")" = "${module}_post_start" ]; then
-			${module}_post_start || exit $?
-		fi
-	done
-
-	if [ "$(command -v postup)" = "postup" ]; then
-		ebegin "Running postup"
-		eindent
-		postup
-		eoutdent
-	fi
-
-	return 0
-}
-
-stop()
-{
-	local IFACE=${RC_SVCNAME#*.} module=
-	local IFVAR=$(shell_var "${IFACE}") opts=
-
-	einfo "Bringing down interface ${IFACE}"
-	eindent
-
-	if [ -z "${MODULES}" ]; then
-		local MODULES=
-		_load_modules false
-	fi
-
-	if [ "$(command -v predown)" = "predown" ]; then
-		ebegin "Running predown"
-		eindent
-		predown || return 1
-		eoutdent
-	else
-		if is_net_fs /; then
-			eerror "root filesystem is network mounted -- can't stop ${IFACE}"
-			return 1
-		fi
-	fi
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_pre_stop")" = "${module}_pre_stop" ]; then
-			${module}_pre_stop || exit $?
-		fi
-	done
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_stop")" = "${module}_stop" ]; then
-			${module}_stop
-		fi
-	done
-
-	# Only delete addresses for interfaces that exist
-	if _exists; then
-		# PPP can manage it's own addresses when IN_BACKGROUND
-		# Important in case "demand" set on the ppp link
-		if ! (yesno ${IN_BACKGROUND} && is_ppp) ; then
-			_delete_addresses "${IFACE}"
-		fi
-	fi
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_post_stop")" = "${module}_post_stop" ]; then
-			${module}_post_stop
-		fi
-	done
-
-	# If not in background, and not loopback then bring the interface down
-	# unless overridden.
-	if ! yesno ${IN_BACKGROUND} && \
-	[ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		eval module=\$ifdown_${IFVAR}
-		module=${module:-${ifdown:-YES}}
-		yesno ${module} && _down 2>/dev/null
-	fi
-
-	type resolvconf >/dev/null 2>&1 && resolvconf -d "${IFACE}" 2>/dev/null
-
-	if [ "$(command -v "postdown")" = "postdown" ]; then
-		ebegin "Running postdown"
-		eindent
-		postdown
-		eoutdent
-	fi
-
-	return 0
-}

init.d/netmount.in

@@ -1,30 +1,21 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-description="Mounts network shares, other than NFS, according to /etc/fstab."
+description="Mounts network shares according to /etc/fstab."
-# We skip all NFS shares in this script because they require extra
-# daemons to be running on the client in order to work correctly.
-# It is best to allow nfs-utils to handle all nfs shares.
 
 depend()
 {
 	config /etc/fstab
-	need net
+	use afc-client amd nfsclient autofs openvpn
-	use afc-client amd autofs openvpn
 	use dns
-	keyword -jail -prefix -vserver
+	keyword -jail -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()
 {
 	local x= fs= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
-		case "$x" in
-			nfs|nfs4)
-			continue
-			;;
-		esac
 		fs="$fs${fs:+,}$x"
 	done
 
@@ -47,14 +38,7 @@ stop()
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
 	for x in $net_fs_list $extra_net_fs_list; do
-		case "$x" in
+		fs="$fs${fs:+,}$x"
-			nfs|nfs4)
-				continue
-				;;
-			*)
-				fs="$fs${fs:+,}$x"
-				;;
-		esac
 	done
 	if [ -n "$fs" ]; then
 		umount -at $fs || eerror "Failed to simply unmount filesystems"
@@ -63,14 +47,7 @@ stop()
 	eindent
 	fs=
 	for x in $net_fs_list $extra_net_fs_list; do
-		case "$x" in
+		fs="$fs${fs:+|}$x"
-			nfs|nfs4)
-				continue
-				;;
-			*)
-				fs="$fs${fs:+|}$x"
-				;;
-		esac
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount umount ${fs:+--fstype-regex} $fs --netdev

init.d/network.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -46,7 +46,11 @@ sys_interfaces()
 		local w= rest= i= cmd=$1
 		while read w rest; do
 			i=${w%%:*}
-			[ "$i" != "$w" ] || continue
+			case "$i" in
+				"$w") continue ;;
+				lo|lo0) continue ;;
+				*) ;;
+			esac
 			if [ "$cmd" = u ]; then
 				ifconfig "$i" | grep -q "[ ]*UP" || continue
 			fi
@@ -223,15 +227,6 @@ start()
 
 	einfo "Starting network"
 	routeflush
-	if [ "$RC_UNAME" = "Linux" ]; then
-		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1
-		route add -net 127.0.0.0 netmask 255.0.0.0 \
-			gw 127.0.0.1 reject 2>/dev/null
-	else
-		ifconfig lo0 127.0.0.1 netmask 255.0.0.0 || cr=1
-		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 \
-			127.0.0.1 -reject || cr=1
-	fi
 	eindent
 	for int in $(interfaces); do
 		local func= cf=
@@ -323,13 +318,17 @@ stop()
 	# Don't stop the network at shutdown.
  	# We don't use the noshutdown keyword so that we are started again
 	# correctly if we go back to multiuser.
-	yesno ${shutdown_network:-YES} && yesno $RC_GOINGDOWN && return 0
+	yesno ${keep_network:-YES} && yesno $RC_GOINGDOWN && return 0
 
 	local int= intv= cmd= downcmd= r=
 	einfo "Stopping network"
 	routeflush
 	eindent
 	for int in $(reverse $(interfaces u)); do
+		case "$int" in
+			lo|lo0) continue ;;
+			*) ;;
+		esac
 		intv=$(shell_var "$int")
 		eval downcmd=\$ifdown_$intv
 		eval cmd=\$ip_$intv

init.d/newsyslog.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/nscd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/numlock.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -9,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 _setleds()

init.d/osclock.in

@@ -0,0 +1,12 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2014 Ralph Sennhauser <sera@igentoo.org>
+# Released under the 2-clause BSD license.
+
+# Can be used on OSs that take care of the clock.
+
+description="Provides clock"
+
+depend()
+{
+	provide clock
+}

init.d/pf.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -17,7 +17,7 @@ depend() {
 start()
 {
 	ebegin "Starting $name"
-	if type kldload >/dev/null 2>&1; then
+	if command -v kldload >/dev/null 2>&1; then
 		kldload pf 2>/dev/null
 	fi
 	pfctl -q -F all

init.d/powerd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/procfs.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -8,66 +8,20 @@ depend()
 {
 	use modules devfs
 	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()
 {
-	# Make sure we insert usbcore if it's a module
-	if [ -f /proc/modules -a ! -d /sys/module/usbcore -a ! -d /proc/bus/usb ]; then
-		modprobe -q usbcore
-	fi
-
-	[ -e /proc/filesystems ] || return 0
-
 	# Setup Kernel Support for miscellaneous Binary Formats
 	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
+		modprobe -q binfmt-misc
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \
 				binfmt_misc /proc/sys/fs/binfmt_misc
-			if eend $? ; then
-				local fmts
-				ebegin "Loading custom binary format handlers"
-				fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
-					/run/binfmt.d/*.conf \
-					@SYSCONFDIR@/binfmt.d/*.conf \
-					""/usr/lib/binfmt.d/*.conf)
-				if [ -n "${fmts}" ]; then
-					echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
-				fi
 				eend $?
-			fi
 		fi
 	fi
-
-	[ "$RC_SYS" = "OPENVZ" ] && return 0
-
-	# Check what USB fs the kernel support.  Currently
-	# 2.5+ kernels, and later 2.4 kernels have 'usbfs',
-	# while older kernels have 'usbdevfs'.
-	if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
-		local usbfs=$(grep -Fow usbfs /proc/filesystems ||
-			grep -Fow usbdevfs /proc/filesystems)
-		if [ -n "$usbfs" ]; then
-			ebegin "Mounting USB device filesystem [$usbfs]"
-			local usbgid="$(getent group usb | \
-				sed -e 's/.*:.*:\(.*\):.*/\1/')"
-			mount -t $usbfs \
-				-o ${usbgid:+devmode=0664,devgid=$usbgid,}noexec,nosuid \
-				usbfs /proc/bus/usb
-			eend $?
-		fi
-	fi
-
-	# Setup Kernel Support for SELinux
-	if [ -d /selinux ] && ! mountinfo -q /selinux; then
-		if grep -qs selinuxfs /proc/filesystems; then
-			ebegin "Mounting SELinux filesystem"
-			mount -t selinuxfs selinuxfs /selinux
-			eend $?
-		fi
-	fi
-
 	return 0
 }

init.d/rarpd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/rc-enabled.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/root.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,7 +7,7 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/rpcbind.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/s6-svscan.in

@@ -0,0 +1,31 @@
+#!@SBINDIR@/openrc-run
+# Copyright (C) 2015 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+command=/bin/s6-svscan
+command_args="${RC_SVCDIR}"/s6-scan
+command_background=yes
+pidfile=/var/run/s6-svscan.pid
+
+depend()
+{
+	need localmount
+}
+
+start_pre()
+{
+	einfo "Creating s6 scan directory"
+	checkpath -d -m 0755 "$RC_SVCDIR"/s6-scan
+	return $?
+}
+
+stop_post()
+{
+	ebegin "Stopping any remaining s6 services"
+	s6-svc -dx "${RC_SVCDIR}"/s6-scan/* 2>/dev/null || true
+	eend $?
+
+	ebegin "Stopping any remaining s6 service loggers"
+	s6-svc -dx "${RC_SVCDIR}"/s6-scan/*/log 2>/dev/null || true
+	eend $?
+}

init.d/savecache.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -25,12 +25,12 @@ start()
 	local rc=
 	if [ ! -d "$RC_LIBEXECDIR"/cache ]; then
 		rm -rf "$RC_LIBEXECDIR"/cache
-		if ! mkdir "$RC_LIBEXECDIR"/cache; then
+		if ! mkdir -p "$RC_LIBEXECDIR"/cache; then
 			rc=$?
 			if yesno "${RC_GOINGDOWN}"; then
 				rc=0
 			fi
-			eend $rc
+			eend $rc "Unable to create $RC_SVCDIR/cache"
 			return $rc
 		fi
 	fi

init.d/savecore.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -23,7 +23,7 @@ start()
 		# Don't quote ${dump_device}, so that if it's unset,
 		# savecore will check on the partitions listed in fstab
 		# without errors in the output
-		savecore -C "$dump_dir" $dump_device >/dev/null
+		savecore -C $dump_device >/dev/null
 	else
 		ls "$dump_dir"/bsd* > /dev/null 2>&1
 	fi

init.d/staticroute.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/swap-blk.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/swap.in

@@ -1,11 +1,11 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 depend()
 {
 	before localmount
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/swapfiles.in

@@ -1,11 +1,11 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 depend()
 {
 	need localmount
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()
@@ -21,14 +21,6 @@ start()
 stop()
 {
 	ebegin "Deactivating additional swap space"
-
-	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
-	# occur. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
-	# fixme: Do we need this here since we are only unmounting swap files
-	# and loopback swap?
-	cd "$RC_SVCDIR"
-	umount -a -t tmpfs 2>/dev/null
-
 	case "$RC_UNAME" in
 		Linux)
 			if [ -e /proc/swaps ]; then

init.d/swclock.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -8,7 +8,7 @@ depend()
 {
 	before *
 	provide clock
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 # swclock is an OpenRC built in
@@ -17,7 +17,7 @@ start()
 {
 	ebegin "Setting the local clock based on last shutdown time"
 	if ! swclock 2> /dev/null; then
-	swclock --warn @PREFIX@/sbin/runscript
+	swclock --warn @SBINDIR@/openrc-run
 	fi
 	eend $?
 }

init.d/syscons.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/sysctl.BSD.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/sysctl.GNU-kFreeBSD.in

@@ -0,0 +1,31 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+depend()
+{
+	before bootmisc logger
+	keyword -prefix
+}
+
+start()
+{
+	[ -e /etc/sysctl.conf ] || return 0
+	local retval=0 var= comments= conf=
+	ebegin "Configuring kernel parameters"
+	eindent
+	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
+		if [ -r "$conf" ]; then
+			vebegin "applying $conf"
+			while read var comments; do
+				case "$var" in
+				""|"#"*) continue;;
+				esac
+				sysctl -w "$var" >/dev/null || retval=1
+			done < "$conf"
+			veend $retval
+		fi
+	done
+	eoutdent
+	eend $retval "Some errors were encountered"
+}