Remove prefix support

I spoke with the prefix team sometime back and was told that they do not
have an interest in using OpenRC on prefix systems.

.gitignore

@@ -1,3 +1,16 @@
-openrc-0.1.tar.bz2
+*.bz2
+
+*.diff
+*.patch
+*.orig
+*.rej
+
+core
 .gdb_history
 .gdbinit
+
+.depend
+*.a
+*.o
+*.So
+lib*.so

FEATURE-REMOVAL-SCHEDULE

@@ -0,0 +1,49 @@
+The following is a list of files and features that are going to be removed in
+the source tree.  Every entry should contain what exactly is going away, why it
+is happening, and who is going to be doing the work.  When the feature is
+removed, it should also be removed from this file.
+
+---------------------------
+
+What: oldnet ADSL rp-pppoe mode
+
+When: undecided
+
+Why: Replaced by the oldnet PPP module
+
+Who:  Robin H. Johnson <robbat2@gentoo.org>
+
+---------------------------
+
+What: oldnet /etc/conf.d/wireless
+
+When: undecided
+
+Why: All configuration moved to /etc/conf.d/net
+
+Who:  Robin H. Johnson <robbat2@gentoo.org>
+
+---------------------------
+
+What: Service pause action
+
+When: Removed already, compatbility warning in place.
+
+Why: ...
+
+Who:
+
+---------------------------
+
+What: Service --startas, --chuid , --oknodo
+
+When: undecided
+
+Why: Obsolete or replaced by other options.
+	 --startas => use --name or --exec
+	 --chuid => use --user
+	 --oknodo => ignore return code instead
+
+Who:
+
+---------------------------

Makefile

@@ -1,12 +1,17 @@
 # OpenRC Makefile
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
-NAME=		openrc
+include Makefile.inc
-VERSION=	0.2.3
+
-PKG=		${NAME}-${VERSION}
+SUBDIR=		conf.d doc etc init.d local.d sysctl.d man net scripts sh src
+
+# Build pkgconfig or not
+MKPKGCONFIG?=	yes
+ifeq (${MKPKGCONFIG},yes)
+SUBDIR+=	pkgconfig
+endif
 
-SUBDIR=		conf.d doc etc init.d man net sh src
 # We need to ensure that runlevels is done last
 SUBDIR+=	runlevels
 
@@ -17,8 +22,9 @@ include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/gitignore.mk
+include ${MK}/git.mk
 
 _installafter:
-	${INSTALL} -d ${DESTDIR}/${PREFIX}/${RC_LIB}/init.d
+	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
-	${INSTALL} -d ${DESTDIR}/${PREFIX}/${RC_LIB}/tmp
+	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/tmp
+	${ECHO} "${VERSION}${GITVER}" > ${DESTDIR}/${LIBEXECDIR}/version

Makefile.inc

@@ -0,0 +1,3 @@
+NAME=		openrc
+VERSION=	0.9.9
+PKG=		${NAME}-${VERSION}

README

@@ -4,13 +4,16 @@ OpenRC README
 Installation
 ------------
 make install
-Yup, that simple. Works with GNU make and BSD make.
+Yup, that simple. Works with GNU make.
 
 You may wish to tweak the installation with the below arguments
 PROGLDFLAGS=-static
 LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
 MKPAM=pam
+MKPKGCONFIG=no
+MKSELINUX=yes
+MKSTATICLIBS=no
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
 PKG_PREFIX=/usr/pkg
@@ -19,6 +22,8 @@ PREFIX=/usr/local
 
 We don't support building a static OpenRC with PAM.
 You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
+If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
+so that all malloc memory should be freed at exit.
 
 You can also brand OpenRC if you so wish like so
 BRANDING=\"Gentoo/$(uname -s)\"
@@ -37,7 +42,7 @@ If any of the following files exist then we do not overwrite them
 rc and rc.shutdown are the hooks from the BSD init into OpenRC.
 devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
 hook into OpenRC.
-inittab is the same, but for SysVInit as used by most Linux distrubtions.
+inittab is the same, but for SysVInit as used by most Linux distributions.
 This can be found in the support folder.
 Obviously, if you're installing this onto a system that does not use OpenRC
 by default then you may wish to backup the above listed files, remove them
@@ -49,19 +54,19 @@ of the system.
 
 
 Reporting Bugs
--------------
+--------------
-If you installed OpenRC from your chosen distribution, you should report
+Since Gentoo Linux is hosting OpenRC development, Bugs should go to
-bugs directly to them. For example, if you use Gentoo and emerged OpenRC
+the Gentoo Bugzilla:
-then you should reports bugs to http://bugs.gentoo.org.
+	http://bugs.gentoo.org/
-
+They should be filed under the "Gentoo Hosted Projects" product and
-Otherwise, you can report them directly to me at http://bugs.marples.name
+the "openrc" component.
 
 
 History - by Roy Marples
 ------------------------
 I became a Gentoo/Linux developer in 2004 and wrote the modular network
 scripts for the Gentoo baselayout package. baselayout is a collection of
-bash scripts to bring up your computer and it's services.
+bash scripts to bring up your computer and its services.
 Then towards the end of 2005 I found myself as the primary maintainer
 for baselayout.
 

STYLE

@@ -0,0 +1,85 @@
+This is the openrc style manual.  It governs the coding style of all code
+in this repository.  Follow it.  Contact openrc@gentoo.org for any questions
+or fixes you might notice.
+
+##########
+# C CODE #
+##########
+
+The BSD Kernel Normal Form (KNF) style is used:
+	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
+Basically, it's like K&R/LKML, but wrapped lines that are indented use 4 spaces.
+
+Highlights:
+	- no trailing whitespace
+	- indented code use tabs (not line wrapped)
+	- cuddle the braces (except for functions)
+	- space after native statements and before paren (for/if/while/...)
+	- no space between function and paren
+	- pointer asterisk cuddles the variable, not the type
+
+void foo(int c)
+{
+	int ret = 0;
+
+	if (c > 1000)
+		return;
+
+	while (c--) {
+		bar(c);
+		ret++;
+	}
+
+	return ret;
+}
+
+##################
+# COMMIT MESSAGES #
+##################
+
+The following is an example of a correctly formatted git commit message
+for this repository. Most of this information came from this blog post
+[1], so I would like to thank the author.
+
+### cut here ###
+Capitalized, short (50 chars or less) summary
+
+More detailed explanatory text, if necessary.  Wrap it to about 72
+characters or so.  In some contexts, the first line is treated as the
+subject of an email and the rest of the text as the body.  The blank
+line separating the summary from the body is critical (unless you omit
+the body entirely); tools like rebase can get confused if you run the
+two together.
+
+Write your commit message in the present tense: "Fix bug" and not "Fixed
+bug."  This convention matches up with commit messages generated by
+commands like git merge and git revert.
+
+Further paragraphs come after blank lines.
+
+- Bullet points are okay, too
+
+- Typically a hyphen or asterisk is used for the bullet, preceded by a
+  single space, with blank lines in between, but conventions vary here
+
+- Use a hanging indent
+
+Reported-by: User Name <email>
+X-[Distro]-Bug: BugID
+X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
+### cut here ###
+
+If you did not write the code and the patch does not include authorship
+information in a format git can use, please use the --author option of the
+git commit command to make the authorship correct.
+
+The Reported-by tag is required if the person who reported the bug is
+different from the author and committer.
+
+  The X-[Distro]-Bug/Bug-URL tags are required if this commit is related
+  to a bug reported to us by a specific distribution   of linux or a
+  *BSD. Also, [Distro] should be replaced with the name of the
+  distribution, e.g. X-Gentoo-Bug.
+
+[1] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
+

TODO

@@ -1,3 +1,7 @@
-- ensure all forks block, restore and unblock signals. needs review 
+- ensure all forks block, restore and unblock signals. needs review
 
 - add support somehow for optional translations
+
+- oldnet[bridging]: Review setting of bridge configuration on dynamic interface add
+
+- Document rc-depend binary.

conf.d/.gitignore

@@ -0,0 +1,2 @@
+network
+staticroute

conf.d/Makefile

@@ -1,7 +1,23 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname local net urandom
+CONF=	bootmisc fsck hostname localmount network staticroute urandom \
+	${CONF-${OS}}
+
+TARGETS+=	network staticroute
+CLEANFILES+=	network staticroute
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
+
+CONF-Linux=	consolefont dmesg hwclock keymaps killprocs modules
+
+CONF-NetBSD=	moused rarpd savecore
+
 include ${MK}/scripts.mk
+
+network: network.in network${SFX}
+	cat $^ > $@
+
+staticroute: staticroute${SFX}
+	cp $@${SFX} $@

conf.d/Makefile.FreeBSD

@@ -1 +0,0 @@
-CONF+=	moused powerd rarpd savecore syscons

conf.d/Makefile.Linux

@@ -1 +0,0 @@
-CONF+=	consolefont hwclock keymaps modules

conf.d/Makefile.NetBSD

@@ -1 +0,0 @@
-CONF+=	moused rarpd savecore

conf.d/adjkerntz

@@ -1,10 +1,10 @@
 # Set CLOCK to "UTC" if your system clock is set to UTC (also known as
-# Greenwich Mean Time).  If your clock is set to the local time, then 
+# Greenwich Mean Time).  If your clock is set to the local time, then
-# set CLOCK to "local".  Note that if you dual boot with Windows, then 
+# set CLOCK to "local".  Note that if you dual boot with Windows, then
 # you should set it to "local".
 clock="UTC"
 
-# If you want to set the Hardware Clock to the current System Time 
+# If you want to set the Hardware Clock to the current System Time
 # during shutdown, then say "YES" here.
 # You normally don't need to do this if you run a ntp daemon.
 clock_systohc="NO"

conf.d/bootmisc

@@ -1,6 +1,10 @@
 # List of /tmp directories we should clean up
-wipe_tmp_dirs="/tmp"
+clean_tmp_dirs="/tmp"
 
 # Should we wipe the tmp paths completely or just selectively remove known
 # locks / files / etc... ?
 wipe_tmp="YES"
+
+# Write the initial dmesg log into /var/log/dmesg after boot
+# This may be useful if you need the kernel boot log afterwards
+log_dmesg="YES"

conf.d/consolefont

@@ -3,7 +3,7 @@
 # you shouldn't specify the trailing ".psf.gz", just the font name below.
 # To use the default console font, comment out the CONSOLEFONT setting below.
 # This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
-# not want to use it, run "rc-update del consolefont" as root).
+# not want to use it, run "rc-update del consolefont boot" as root).
 consolefont="default8x16"
 
 # consoletranslation is the charset map file to use.  Leave commented to use

conf.d/dmesg

@@ -0,0 +1,3 @@
+# Sets the level at which logging of messages is done to the
+# console.  See dmesg(8) for more info.
+dmesg_level="1"

conf.d/fsck

@@ -13,6 +13,18 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
+# If passno is not enough granularity, you can also specify mountpoints to
+# check. This should NOT be used for the default non-multiplexed fsck, or your
+# system might not be checked. Additionally, it is mutually exclusive with
+# the fsck_passno setting.
+#fsck_mnt=""
+#fsck_mnt="/home"
+
+# Most modern fs's don't require a full fsck on boot, but for those that do
+# it may be advisable to skip this when running on battery.
+# WARNING: Do not turn this off if you have any JFS partitions.
+fsck_on_battery="YES"
+
 # fsck_shutdown causes fsck to trigger during shutdown as well as startup.
 # The end result of this is that if any periodic non-root filesystem checks are
 # scheduled, under normal circumstances the actual check will happen during

conf.d/hwclock

@@ -1,13 +1,17 @@
-# Set CLOCK to "UTC" if your system clock is set to UTC (also known as
+# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
-# Greenwich Mean Time).  If your clock is set to the local time, then 
+# Greenwich Mean Time).  If that clock is set to the local time, then
-# set CLOCK to "local".  Note that if you dual boot with Windows, then 
+# set CLOCK to "local".  Note that if you dual boot with Windows, then
 # you should set it to "local".
 clock="UTC"
 
-# If you want to set the Hardware Clock to the current System Time 
+# If you want to set the system time to the current hardware clock
-# during shutdown, then say "YES" here.
+# during bootup, then say "YES" here. You do not need this if you are
-# You normally don't need to do this if you run a ntp daemon.
+# running a modern kernel with CONFIG_RTC_HCTOSYS set to y.
-clock_systohc="NO"
+#clock_hctosys="YES"
+
+# If you do not want to set the hardware clock to the current system
+# time (software clock) during shutdown, set this to no.
+#clock_systohc="YES"
 
 # If you wish to pass any other arguments to hwclock during bootup,
 # you may do so here. Alpha users may wish to use --arc or --srm here.

conf.d/ipfw

@@ -0,0 +1,14 @@
+# ipfw provides a stateful firewall.
+# This means we allow everything out, and if we have a connection we allow it
+# back in. This is very flexable and quite secure.
+
+# For ease of use, we allow auth and ssh ports through as well.
+# To override the list of allowed ports
+#ipfw_ports_in="auth ssh"
+
+# You may want to enable logging of denied connections
+#ipfw_log_deny="YES"
+
+# This ports not logged
+#ipfw_ports_nolog="135-139,445 1026,1027 1433,1434"
+

conf.d/keymaps

@@ -1,16 +1,18 @@
-# Use KEYMAP to specify the default console keymap.  There is a complete tree
+# Use keymap to specify the default console keymap.  There is a complete tree
 # of keymaps in /usr/share/keymaps to choose from.
 keymap="us"
 
 # Should we first load the 'windowkeys' console keymap?  Most x86 users will
 # say "yes" here.  Note that non-x86 users should leave it as "no".
+# Loading this keymap will enable VT switching (like ALT+Left/Right)
+# using the special windows keys on the linux console.
 windowkeys="NO"
 
 # The maps to load for extended keyboards.  Most users will leave this as is.
 extended_keymaps=""
 #extended_keymaps="backspace keypad euro2"
 
-# Tell dumpkeys(1) to interpret character action codes to be 
+# Tell dumpkeys(1) to interpret character action codes to be
 # from the specified character set.
 # This only matters if you set unicode="yes" in /etc/rc.conf.
 # For a list of valid sets, run `dumpkeys --help`

conf.d/killprocs

@@ -0,0 +1,3 @@
+# If you wish to pass any options to killall5 during shutdown,
+# you should do so here.
+killall5_opts=""

conf.d/local

@@ -1,18 +0,0 @@
-# Here is where you can put anything you need to start
-# that there is not an init script for.
-
-local_start() {
-	# This is a good place to load any misc programs
-	# on startup (use &>/dev/null to hide output)
-
-	# We should always return 0
-	return 0
-}
-
-local_stop() {
-	# This is a good place to unload any misc.
-	# programs you started above.
-	
-	# We should always return 0
-	return 0
-}

conf.d/localmount

@@ -0,0 +1,3 @@
+# Stop the unmounting of certain points.
+# This could be useful for some NFS related work.
+#no_umounts="/dir1:/var/dir2"

conf.d/modules

@@ -1,15 +1,23 @@
 # You can define a list modules for a specific kernel version,
 # a released kernel version, a main kernel version or just a list.
+# The most specific versioned variable will take precedence.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
+#modules_2="ipv6"
 #modules="ohci1394"
 
+# You can give modules a different name when they load - the new name
+# will also be used to pick arguments below.
+#modules="dummy:dummy1"
+
 # Give the modules some arguments if needed, per version if necessary.
+# Again, the most specific versioned variable will take precedence.
 #module_ieee1394_args="debug"
-#module_ieee1394_args_2_6_23_gentoo_r5="ieee1394 ohci1394"
+#module_ieee1394_args_2_6_23_gentoo_r5="debug2"
-#module_ieee1394_args_2_6_23="tun ieee1394"
+#module_ieee1394_args_2_6_23="debug3"
-#module_ieee1394_args_2_6="tun"
+#module_ieee1394_args_2_6="debug4"
+#module_ieee1394_args_2="debug5"
 
 # You should consult your kernel documentation and configuration
 # for a list of modules and their options.

conf.d/moused

@@ -11,6 +11,6 @@
 
 # You can also multiplex the init script for each device like so
 #   ln -s moused /etc/init.d/moused.ums0
-# This enables you to have a config file per mouse (forces moused_device 
+# This enables you to have a config file per mouse (forces moused_device
 # to ums0 in this case) and control each mouse.
 # devd can also start and stop these mice, which laptop users will find handy.

conf.d/net

@@ -1,4 +1,4 @@
 # This blank configuration will automatically use DHCP for any net.*
 # scripts in /etc/init.d.  To create a more complete configuration,
-# please review /usr/share/doc/openrc/net.example and save your configuration
+# please review /usr/share/doc/openrc*/net.example* and save your configuration
 # in /etc/conf.d/net (this file :]!).

conf.d/network.BSD.in

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"

conf.d/network.Linux.in

@@ -0,0 +1,43 @@
+
+# You can assign a default route
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"
+
+# ifconfig under Linux is not that powerful and doesn't easily handle
+# multiple addresses
+# On the other hand, ip (iproute2) is quite powerful and is also supported
+#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
+
+# You can also use ip to add the default route.
+#defaultiproute="via 192.168.0.1"
+#defaultiproute6="via 2001:a:b:c"
+
+# ip doesn't handle MTU like ifconfig, but we can do it like so
+#ifup_eth0="ip link set \$int mtu 1500"
+
+# Create a bonded interface
+#interfaces="bond0"
+#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
+#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
+#ifdown_bond0="rmmod bonding"
+
+# Create tap interface and a bridge interface.
+# We add the tap to the bridge.
+# An external program, like dhcpcd, will configure the IP on the bridge
+#interfaces="tun0 br0"
+#ifup_tun0="tunctl -t \$int"
+#ifdown_tun0="tunctl -d \$int"
+#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
+#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
+
+# Create VLAN
+#interfaces="eth0_2 eth0_3 eth0_4"
+#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
+#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
+#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
+#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
+#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
+
+# Normally you would use wpa_supplicant to configure wireless, but you can
+# use iwconfig also
+#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.in

@@ -0,0 +1,28 @@
+# Assign static IP addresses and run custom scripts per interface.
+# Seperate commands with ;
+# Prefix with ! to run a shell script.
+# Use \$int to represent the interface
+#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
+
+# You also have ifup_eth0 and ifdown_eth0 to run other commands when
+# eth0 is started and stopped.
+# You should note that we don't stop the network at system shutdown by default.
+# If you really need this, then set shutdown_network=YES
+
+# Lastly, the interfaces variable pulls in virtual interfaces that cannot
+# be automatically detected.
+#interfaces="br0 bond0 vlan0"
+
+# You can also use files instead of variables here if you like:
+# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
+# /etc/ip.eth0 is equivalent to ifconfig_eth0
+# /etc/ifup.eth0 is equivalent to ifup_eth0
+# /etc/ifdown.eth0 is equivalent to ifdown_eth0
+# Any files found will automatically be put into the interfaces variable.
+# You don't need to escape variables in files, so use $int instead of \$int.
+
+# If you require DHCP, you should install dhcpcd and it to the boot or
+# default runlevel.
+
+# NIS users can set the domain name here
+#domainname="foobar"

conf.d/staticroute.BSD.in

@@ -0,0 +1,6 @@
+# Separate multiple routes using ; or new lines.
+# /etc/route.conf(5) takes precedence over this configuration.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.Linux.in

@@ -0,0 +1,8 @@
+# Separate multiple routes using ; or new lines.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
+#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
+
+# Example static routes using iproute2. See ip(8) for syntax.
+#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

conf.d/urandom

@@ -2,4 +2,4 @@
 # (say for crypt swap), so you will need to customize this
 # behavior.  If you have /var on a separate partition, then
 # make sure this path lives on your root device somewhere.
-urandom_seed="/var/run/random-seed"
+urandom_seed="/var/lib/misc/random-seed"

doc/Makefile

@@ -1,7 +1,11 @@
 DIR=	${DOCDIR}/openrc
+SRCS=	net.example.in
 INC=	net.example
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+%.example.in: %.example${SFX}
+	${CP} $< $@
+
 include ${MK}/scripts.mk

doc/Makefile.FreeBSD

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	${CP} $< $@

doc/Makefile.Linux

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.Linux.in
-.Linux.in:
-	${CP} $< $@

doc/Makefile.NetBSD

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	${CP} $< $@

doc/net.example.BSD.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
+# down to the section labeled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -22,10 +22,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatability with existing ones.
+# compatibility with existing ones.
-# 
+#
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have it's package installed
+# you specify a module here that doesn't have its package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -43,11 +43,6 @@
 #       (eth0:1, eth0:2, etc)
 #       iproute2 does not do this as there is no need to
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
-# Or you can use sequence expressions
-#config_eth0="192.168.0.{2..4}/24"  FIXME - may not work with baselayout2
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -72,10 +67,12 @@
 # If a specified module fails (like dhcp - see below), you can specify a
 # fallback like so
 #fallback_eth0="192.168.0.2 netmask 255.255.255.0"
-#fallback_route_eth0="default via 192.168.0.1"
+#fallback_routes_eth0="default via 192.168.0.1"
 
 # NOTE: fallback entry must match the entry location in config_eth0
 # As such you can only have one fallback route.
+# Also, if you do not set a fallback_routes entry for an interface, the
+# routes entry will be used if that is set.
 
 # Some users may need to alter the MTU - here's how
 #mtu_eth0="1500"
@@ -87,6 +84,10 @@
 # is how long we wait for carrier. The current default is 3 seconds
 #carrier_timeout_eth0=-1
 
+# You may wish to disable the interface being brought down when stopping.
+# This is only of use for WakeOnLan.
+#ifdown_eth0="NO"
+
 ##############################################################################
 # OPTIONAL MODULES
 
@@ -97,8 +98,8 @@
 #modules="iwconfig"
 
 # ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
-# that scans, assoicates and re-configures if assocation is lost.
+# that scans, associates and re-configures if association is lost.
-# We call it iwconfig to seperate the wireless setup from ifconfig.
+# We call it iwconfig to separate the wireless setup from ifconfig.
 ####################################
 # HINTS
 #
@@ -183,7 +184,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting it's SSID
+# This is used when the Access Point is not broadcasting its SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -194,7 +195,7 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and seperate them with a space
+# Surround each SSID with the " character and separate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
 #preferred_aps="SSID1 SSID2"
@@ -209,11 +210,11 @@
 # any other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred
 # list
-# "forcepreferred" means it will forceably connect to APs in order if it does
+# "forcepreferred" means it will forcibly connect to APs in order if it does
 # not find them in a scan
-# "forcepreferredonly" means it forceably connects to the APs in order and
+# "forcepreferredonly" means it forcibly connects to the APs in order and
 # does not bother to scan
-# "forceany" does the same as forcepreferred + connects to any other 
+# "forceany" does the same as forcepreferred + connects to any other
 # available AP
 # Default is "any"
 #associate_order="any"
@@ -238,12 +239,12 @@
 
 ##################################################
 # wpa_supplicant
-# emerge net-wireless/wpa-supplicant
+# emerge net-wireless/wpa_supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Console the wpa_supplicant.conf.example that is installed in
+# Consult the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 
-# By default we don't wait for wpa_suppliant to associate and authenticate.
+# By default we don't wait for wpa_supplicant to associate and authenticate.
 # If you would like to, so can specify how long in seconds
 #associate_timeout_eth0=60
 # A value of 0 means wait forever.
@@ -267,13 +268,13 @@
 # won't have associated then)
 
 # If you're using anything else to configure wireless on your interface AND
-# you have installed wpa_supplicant, you need to disable wpa_supplicant 
+# you have installed wpa_supplicant, you need to disable wpa_supplicant
 #modules="!iwconfig !wpa_supplicant"
 #or
 #modules="!wireless"
 
 ##############################################################################
-# WIRELESS SSID IN VARIABLES 
+# WIRELESS SSID IN VARIABLES
 ##############################################################################
 # Remember to change SSID to your SSID.
 # Say that your SSID is My NET - the line
@@ -321,7 +322,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release it's lease when it stops, not to
+# This tells the dhcp client to release its lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to
@@ -369,7 +370,7 @@
 
 ##############################################################################
 # ADVANCED CONFIGURATION
-# 
+#
 # Four functions can be defined which will be called surrounding the
 # start/stop operations.  The functions are called with the interface
 # name first so that one function can control multiple adapters. An extra two
@@ -387,6 +388,17 @@
 #
 # ${IFACE} is set to the interface being brought up/down
 # ${IFVAR} is ${IFACE} converted to variable name bash allows
+#
+# For historical and compatibility reasons, preup is actually normally called
+# in the following sequence: up ; preup ; up.
+# The first up causes the kernel to initialize the device, so
+# that it is available for use in the preup function.  However, for some
+# hardware, e.g. CAN devices, some configuration is needed before trying to up
+# the interface will actually work. For such hardware, the
+# up_before_preup variables will allow skipping the first up call if set
+# to yes.
+#up_before_preup_IFVAR="NO"
+#up_before_preup="NO"
 
 #preup() {
 #	# Remember to return 0 on success

doc/net.example.Linux.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
+# down to the section labeled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -23,10 +23,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatability with existing ones.
+# compatibility with existing ones.
-# 
+#
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have it's package installed
+# you specify a module here that doesn't have its package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -49,7 +49,7 @@
 
 ##############################################################################
 # INTERFACE HANDLERS
-# 
+#
 # We provide two interface handlers presently: ifconfig and iproute2.
 # You need one of these to do any kind of network configuration.
 # For ifconfig support, emerge sys-apps/net-tools
@@ -68,13 +68,9 @@
 # NOTE: ifconfig creates an aliased device for each extra IPv4 address
 #       (eth0:1, eth0:2, etc)
 #       iproute2 does not do this as there is no need to
+# WARNING: You cannot mix multiple addresses on a line with other parameters!
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
 # However, that only works with CIDR addresses, so you can't use netmask.
-# Or you can use sequence expressions
-#config_eth0="192.168.0.{2..4}/24"
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -90,6 +86,14 @@
 # If you don't want ANY address (only useful when calling for advanced stuff)
 #config_eth0="null"
 
+# If you need to pass parameters to go with an address, you can do so on the
+# same line as the address. You should split multiple addresses with newlines.
+# WARNING: You cannot mix multiple addresses on a line with other parameters!
+#config_eth0="192.168.0.2/24 scope host"
+#config_eth0="4321:0:1:2:3:4:567:89ab/64 nodad home preferred_lft 0"
+#config_eth0="192.168.0.2/24 scope host
+#4321:0:1:2:3:4:567:89ab/64 nodad home preferred_lft 0"
+
 # Here's how to do routing if you need it
 # We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route
 #routes_eth0="default via 192.168.0.1
@@ -99,10 +103,12 @@
 # If a specified module fails (like dhcp - see below), you can specify a
 # fallback like so
 #fallback_eth0="192.168.0.2/24"
-#fallback_route_eth0="default via 192.168.0.1"
+#fallback_routes_eth0="default via 192.168.0.1"
 
 # NOTE: fallback entry must match the entry location in config_eth0
 # As such you can only have one fallback route.
+# Also, if you do not set a fallback_routes entry for an interface, the
+# routes entry will be used if that is set.
 
 # Some users may need to alter the MTU - here's how
 #mtu_eth0="1500"
@@ -111,7 +117,7 @@
 
 # Each module described below can set a default base metric, lower is
 # preferred over higher. This is so we can prefer a wired route over a
-# wireless route automaticaly. You can override this by setting
+# wireless route automatically. You can override this by setting
 #metric_eth0="100"
 # or on a global basis
 #metric="100"
@@ -120,6 +126,10 @@
 # tables you may have to set a global metric as the due to a simple read of
 # the routing table taking over a minute at a time.
 
+# You may wish to disable the interface being brought down when stopping.
+# This is only of use for WakeOnLan.
+#ifdown_eth0="NO"
+
 ##############################################################################
 # OPTIONAL MODULES
 
@@ -254,7 +264,7 @@
 #key_SSID="s:foobar enc open"
 #key_SSID="1234-5678-9012 enc open"
 
-# You may want to set muliple keys - here's an example
+# You may want to set multiple keys - here's an example
 # It sets 4 keys on the card and instructs to use key 2 by default
 #key_SSID="[1] s:passkey1 key [2] s:passkey2 key [3] s:passkey3 key [4] s:passkey4 key [2]"
 
@@ -284,7 +294,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting it's SSID
+# This is used when the Access Point is not broadcasting its SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -295,10 +305,10 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and seperate them with a space
+# Surround each SSID with the " character and separate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
-#preferred_aps="SSID1 SSID2" 
+#preferred_aps="SSID1 SSID2"
 
 # You can also define a preferred_aps list per interface
 #preferred_aps_eth0="SSID3 SSID4"
@@ -308,9 +318,9 @@
 # "any" means it will connect to visible APs in the preferred list and then any
 # other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred list
-# "forcepreferred" means it will forceably connect to APs in order if it does not find
+# "forcepreferred" means it will forcibly connect to APs in order if it does not find
 # them in a scan
-# "forcepreferredonly" means it forceably connects to the APs in order and does not bother
+# "forcepreferredonly" means it forcibly connects to the APs in order and does not bother
 # to scan
 # "forceany" does the same as forcepreferred + connects to any other available AP
 # Default is "any"
@@ -337,19 +347,19 @@
 
 ############################################################
 # wpa_supplicant
-# emerge net-wireless/wpa-supplicant
+# emerge net-wireless/wpa_supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Console the wpa_supplicant.conf.example that is installed in
+# Consult the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 # To configure wpa_supplicant
 #wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards
 # Consult wpa_supplicant for more drivers - the default is -Dwext which should
 # work for most cards.
 
-# By default we don't wait for wpa_suppliant to associate and authenticate.
+# By default we don't wait for wpa_supplicant to associate and authenticate.
 # If you need to change this behaviour then you don't know how our scripts work
 # and setting this value could cause strange things to happen.
-# If you would like to, so can specify how long in seconds.
+# If you would like it to wait, you can specify how long in seconds.
 #associate_timeout_eth0=60
 # A value of 0 means wait forever.
 
@@ -372,13 +382,13 @@
 # won't have associated then)
 
 # If you're using anything else to configure wireless on your interface AND
-# you have installed wpa_supplicant, you need to disable wpa_supplicant 
+# you have installed wpa_supplicant, you need to disable wpa_supplicant
 #modules="!iwconfig !wpa_supplicant"
 #or
 #modules="!wireless"
 
 ##############################################################################
-# WIRELESS SSID IN VARIABLES 
+# WIRELESS SSID IN VARIABLES
 ##############################################################################
 # Remember to change SSID to your SSID.
 # Say that your SSID is My NET - the line
@@ -413,7 +423,7 @@
 # dhclient: emerge net-misc/dhcp
 # dhcpcd:   emerge net-misc/dhcpcd
 # pump:     emerge net-misc/pump
-# udhcpc:   emerge net-misc/udhcp
+# udhcpc:   emerge sys-apps/busybox
 
 # If you have more than one DHCP client installed, you need to specify which
 # one to use - otherwise we default to dhcpcd if available.
@@ -422,7 +432,7 @@
 # Notes:
 # - All clients send the current hostname to the DHCP server by default
 # - dhcpcd does not daemonize when the lease time is infinite
-# - udhcp-0.9.3-r3 and earlier do not support getting NTP servers 
+# - udhcp-0.9.3-r3 and earlier do not support getting NTP servers
 # - pump does not support getting NIS servers
 # - DHCP tends to erase any existing device information - so add
 #   static addresses after dhcp if you need them
@@ -449,7 +459,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release it's lease when it stops, not to
+# This tells the dhcp client to release its lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to
@@ -468,7 +478,7 @@
 #fallback_eth0="apipa"
 
 #-----------------------------------------------------------------------------
-# ARPING Gateway configuration 
+# ARPING Gateway configuration
 # and
 # Automatic Private IP Addressing (APIPA)
 # For arpingnet / apipa support, emerge net-misc/iputils or net-analyzer/arping
@@ -528,7 +538,8 @@
 
 #-----------------------------------------------------------------------------
 # VLAN (802.1q support)
-# For VLAN support, emerge net-misc/vconfig
+# For VLAN support, emerge sys-apps/iproute2
+# The old vconfig based VLAN support is no longer available.
 
 # Specify the VLAN numbers for the interface like so
 # Please ensure your VLAN IDs are NOT zero-padded
@@ -538,10 +549,27 @@
 # need it up.
 #config_eth0="null"
 
-# You can also configure the VLAN - see for vconfig man page for more details
+# You can also configure the VLAN - see for ip man page for more details
-#vconfig_eth0="set_name_type VLAN_PLUS_VID_NO_PAD"
+# To change the vlan interface name. If not set, the standard "iface.vlanid"
-#vconfig_vlan1="set_flag 1
+# will be used. This is the replacement for the old 'vconfig set_name_type'
-#set_egress_map 2 6"
+# functionality.
+#vlan1_name="vlan1"
+#vlan2_name="eth0.2"
+
+# The following shows the old set_name_type setting and what new option to set:
+# Using eth9 & VLAN VID 26 as an example.
+# VLAN_PLUS_VID         vlan26_name="vlan0026"
+# VLAN_PLUS_VID_NO_PAD  vlan26_name="vlan26"
+# DEV_PLUS_VID          vlan26_name="eth9.0026"
+# DEV_PLUS_VID_NO_PAD   vlan26_name="eth9.26"
+
+# Set the vlan flags
+#vlan1_flags="reorder_hdr off gvrp on loose_binding on"
+
+# Configure in/egress maps
+#vlan1_ingress="2:6 3:5"
+#vlan1_egress="1:2"
+
 #config_vlan1="172.16.3.1/23"
 #config_vlan2="172.16.2.1/23"
 
@@ -554,30 +582,52 @@
 # This means you do not need to create init scripts in /etc/init.d for each
 # vlan, you must need to create one for the physical interface.
 # If you wish to control the configuration of each vlan through a separate
-# script, or wish to rename the vlan interface to something that vconfig
+# script then you need to do this.
-# cannot then you need to do this.
 #vlan_start_eth0="no"
 
 # If you do the above then you may want to depend on eth0 like so
-# rc_need_vlan1="net.eth0"
+# rc_net_vlan1_need="net.eth0"
 # NOTE: depend functions only work in /etc/conf.d/net
 # and not in profile configs such as /etc/conf.d/net.foo
 
+# Also, you might want to make eth0 not provide net in this case so that
+# dependent services will start when the vlan is active instead of the
+# physical interface.
+# rc_net_eth0_provide="!net"
+
+# MAC-VLAN support
+# The following configuration can be used to create a new interface 'macvlan0'
+# linked to 'eth0'
+#macvlan_macvlan0="eth0"
+
+# MAC-VLAN mode (private, vepa, bridge, passtru)
+#mode_macvlan0="private"
+
+# IP address, MAC address, ... are configured as a normal interface
+#config_macvlan0="192.168.20.20/24"
+#mac_macvlan0="00:50:06:20:20:20"
+
 #-----------------------------------------------------------------------------
 # Bonding
-# For link bonding/trunking emerge net-misc/ifenslave
+# For link bonding/trunking on 2.4 kernels, or kernels without sysfs
+# emerge net-misc/ifenslave
 
 # To bond interfaces together
 #slaves_bond0="eth0 eth1 eth2"
 #config_bond0="null" # You may not want to assign an IP the the bond
 
+# You can also configure the bond here, which must be done via sysfs on 2.6
+# kernels or newer. See the kernel bonding documentation for a description of
+# these options.
+#arp_ip_target_bond0="+26.0.0.0"
+
 # If any of the slaves require extra configuration - for example wireless or
 # ppp devices - we need to depend function on the bonded interfaces
-#rc_need_bond0="net.eth0 net.eth1"
+#rc_net_bond0_need="net.eth0 net.eth1"
 
 
 #-----------------------------------------------------------------------------
-# Classical IP over ATM 
+# Classical IP over ATM
 # For CLIP support emerge net-dialup/linux-atm
 
 # Ensure that you have /etc/atmsigd.conf setup correctly
@@ -615,7 +665,7 @@
 #
 # Here you should specify what pppd plugins you want to use
 # Available plugins are: pppoe, pppoa, capi, dhcpc, minconn, radius,
-#			 radattr, radrealms and winbind 
+#			 radattr, radrealms and winbind
 #plugins_ppp0="pppoe"			# Required plugin for PPPoE
 #plugins_ppp0="pppoa vc-encaps"		# Required plugin for PPPoA with an option
 #plugins_ppp0="capi"			# Required plugin for ISDN
@@ -653,9 +703,9 @@
 #
 # Dead peer detection
 #	lcp-echo-interval 15	# Send a LCP echo every 15 seconds
-#	lcp-echo-failure 3	# Make peer dead after 3 consective
+#	lcp-echo-failure 3	# Make peer dead after 3 consecutive
 #				# echo-requests
-#	
+#
 # Compression options - use these to completely disable compression
 #	noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp
 #
@@ -690,7 +740,7 @@
 # If the link require extra configuration - for example wireless or
 # RFC 268 bridge - we need to depend on the bridge so they get
 # configured correctly.
-#rc_need_ppp0="net.nas0"
+#rc_net_ppp0_need="net.nas0"
 
 #WARNING: if MTU of the PPP interface is less than 1500 and you use this
 #machine as a router, you should add the following rule to your firewall
@@ -754,7 +804,7 @@
 
 #-----------------------------------------------------------------------------
 # TUN/TAP
-# For TUN/TAP support emerge net-misc/openvpn or sys-apps/usermode-utilities
+# For TUN/TAP support install iproute2, openvpn or usermode-utilities
 #
 # You must specify if we're a tun or tap device. Then you can give it any
 # name you like - such as vpn
@@ -765,6 +815,9 @@
 #tuntap_tap0="tap"
 #config_tap0="192.168.0.1/24"
 
+# Use something like this to pass custom options to iproute2 during
+# tunnel creation. This sets the user and group ownership of the node.
+#iproute2_tun1="user foo group bar"
 # For passing custom options to tunctl use something like the following.  This
 # example sets the owner to adm
 #tunctl_tun1="-u adm"
@@ -782,26 +835,40 @@
 #bridge_add_eth0="br0"
 #bridge_add_eth1="br0"
 
-# You need to configure the ports to null values so dhcp does not get started 
+# NOTE: If you want to manually start an empty bridge, and then dynamically add
+# ports to it you must set at least one of the following variables based on the
+# interface name, so that we can pick it up from your configuration. Even an
+# empty value variable is fine, but at least one of them must be set:
+# brctl_IFVAR
+
+# You need to configure the ports to null values so dhcp does not get started
 #config_eth0="null"
 #config_eth1="null"
 
-# Finally give the bridge an address - dhcp or a static IP
+# Finally give the bridge an address - dhcp or a static IP, this is assigned to
+# the bridge when the bridge is explicitly started.
 #config_br0="dhcp" # may not work when adding ports dynamically
 #config_br0="192.168.0.1/24"
 
 # If any of the ports require extra configuration - for example wireless or
 # ppp devices - we need to depend on them like so.
-#rc_need_br0="net.eth0 net.eth1"
+#rc_net_br0_need="net.eth0 net.eth1"
 
 # Below is an example of configuring the bridge
 # Consult "man brctl" for more details
-#brctl_br0="setfd 0
+#brctl_br0="setfd 15
-#sethello 0
+#sethello 2
-#stp off"
+#stp on"
+
+# You can also configure the bridge or bridge members via sysfs on 2.6 kernels
+# or newer. See the kernel bridge documentation for a description of these
+# options.
+#stp_state_br0="0"
+#forward_delay_br0="10"
+#hairpin_mode_eth0="1"
 
 #-----------------------------------------------------------------------------
-# RFC 2684 Bridge Support 
+# RFC 2684 Bridge Support
 # For RFC 2684 bridge support emerge net-misc/br2684ctl
 
 # Interface names have to be of the form nas0, nas1, nas2, etc.
@@ -817,8 +884,8 @@
 #config_nas0="'192.168.0.1/24'"
 
 #-----------------------------------------------------------------------------
-# Tunnelling
+# Tunneling
-# WARNING: For tunnelling it is highly recommended that you
+# WARNING: For tunneling it is highly recommended that you
 # emerge sys-apps/iproute2
 #
 # For GRE tunnels
@@ -833,20 +900,73 @@
 
 # 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you
 # have a non-private address configured on an interface.
-# link_6to4="eth0"		# Interface to base it's addresses on
+# link_6to4="eth0"		# Interface to base its addresses on
 # config_6to4="ip6to4"
 # You may want to depend on eth0 like so
-#rc_need_6to4="net.eth0"
+#rc_net_6to4_need="net.eth0"
 # To ensure that eth0 is configured before 6to4. Of course, the tunnel could be
 # any name and this also works for any configured interface.
 # NOTE: If you're not using iproute2 then your 6to4 tunnel has to be called
 # sit0 - otherwise use a different name like 6to4 in the example above.
 
 # You can also specify a relay and suffix if you like.
-# The default relay is 192.88.99.1 and the defualt suffix is :1
+# The default relay is 192.88.99.1 and the default suffix is :1
 #relay_6to4="192.168.3.2"
 #suffix_6to4=":ff"
 
+#-----------------------------------------------------------------------------
+# Advanced Routing
+# WARNING: For advanced routing you MUST be using sys-apps/iproute2
+#
+# This provides a means to do multi-homing and more using the Routing Policy
+# Database (RPDB).
+#
+# See the following links for background and more information.
+# http://linux-ip.net/html/ch-routing.html
+# http://linux-ip.net/html/ch-advanced-routing.html
+
+# The rules listed will be added with 'ip rule add LINE' when the interface is
+# being brought up. They will also be removed with 'ip rule delete LINE'.
+# The rules added are also stored for later removal, so if you alter your rules
+# directly before stopping, you should review your rules again after stopping.
+
+# Note in earlier versions of openrc, this was provided as an example in
+# postup/postdown, however that implementation suffered some bugs in corner
+# cases, which are now fixed with this merger. If you used the previous
+# example, you should only need to drop the relevent portions of your
+# postup/postdown functions, and review the quoting in your rules_IFACE
+# variables.
+
+# Below is a trivial example for a dual-homed connection where there is an OOB
+# management network. Only packets explicitly with an address from or to the
+# OOB are sent via eth0. All others go via eth1 as the eth1 rules have a lower
+# priority.
+
+# If you want to use names for your tables, you should put lines into
+# /etc/iproute2/rt_tables, an example follows:
+# 2 oob
+# 3 external
+#
+# IPv6 RPDB entries are to be found in the rules6_IFVAR variables:
+
+#rules_eth0="
+#from ZZZ.ZZZ.200.128/27 table oob priority 500
+#to ZZZ.ZZZ.200.128/27 table oob priority 550"
+#rules_eth1="
+#from XXX.XXX.112.0/24 table external priority 400
+#to XXX.XXX.112.0/24 table external priority 450"
+#routes_eth0="
+#ZZZ.ZZZ.200.128/27 dev eth0 table oob scope link
+#default via ZZZ.ZZZ.200.129 table oob"
+#routes_eth1="
+#XXX.XXX.112.0/24 dev eth1 table external scope link
+#default via XXX.XXX.112.1 dev eth1"
+
+# IPv6 example:
+#rules6_eth0="
+#from 2001:0DB8:AAAA:BBBB::/64 table vpn priority 100
+#to 2001:0DB8:AAAA:BBBB::/64 table vpn priority 150"
+
 
 #-----------------------------------------------------------------------------
 # System
@@ -891,10 +1011,12 @@
 # and you're done :)
 
 # By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services now that network is up
+# If you would like it to wait so that other services know that network is
-# then you can specify a timeout here.
+# up then you can specify a timeout here. A value of 0 means wait forever,
+# and a negative value means never wait.
+#plug_timeout_eth0="10"
+# If you want to set it for all interfaces:
 #plug_timeout="10"
-# A value of 0 means wait forever.
 
 # If you don't want to use netplug on a specific interface but you have it
 # installed, you can disable it for that interface via the modules statement
@@ -908,9 +1030,75 @@
 #ifplugd_eth0="--api-mode=wlan"
 # man ifplugd for more options
 
+#-----------------------------------------------------------------------------
+# Interface hardware tuning & configuration via ethtool
+# If you need to change explicit hardware settings on your network card prior
+# to bringing the interface up, the following is available.
+#
+# For a full listing of settings, please consulting ethtool(8) and the output
+# of "ethtool --help".
+#
+# Multiple entries (seperated by newlines) are supported in all of the
+# variables as some settings cannot be changed at the same time.
+#
+# Valid variable name fragments: change pause coalesce ring offload
+# change_eeprom identify nfc flash rxfh_indir ntuple
+
+# Set Wake-On-Lan to listen for SecureOn MagicPacket(tm), the message level to
+# notify us of WOL changes, and the SecureOn password to 'DE:AD:BE:EF:CA:FE'.
+#ethtool_change_eth0="wol gs
+#msglvl wol on
+#sopass DE:AD:BE:EF:CA:FE"
+
+# Disable pause auto-negotiation and explicitly enable RX and TX pause.
+#ethtool_pause_eth0="autoneg off
+#rx on tx on"
+
+# Enasble adaptive RX and TX coalescing
+#ethtool_coalesce_eth0="adaptive-rx on adaptive-tx on"
+
+# Change ring buffer settings
+#ethtool_ring_eth0=""
+
+# Enable all offload settings
+#ethtool_offload_eth0="rx on tx on sg on tso on ufo on gso on gro on lro on"
+
+# Change specific bytes in the EEPROM
+#ethtool_change_eeprom_eth0=""
+
+# Run the identify sequence on the interface for 1 second (does not return until completion)
+#ethtool_identify_eth0="1"
+
+# Configure receive network flow classification
+#ethtool_nfc_eth0="
+#rx-flow-hash tcp4 f
+#rx-flow-hash udp4 s"
+
+# Flash firmware to all regions
+#ethtool_flash_eth0="/some/path/firmware1 0"
+
+# Flash firmware to region 1
+#ethtool_flash_eth0="/some/path/firmware2 1"
+
+# Set receive flow hash indirection table for even balancing between N receive queues
+#ethtool_rxfh_indir_eth0="equal 4"
+
+# Configure Rx ntuple filters and actions
+#ethtool_ntuple_eth0=""
+
+# Additionally, there is a special control variable, if you need to change the
+# order of option processing. The default order is:
+# flash change-eeprom change pause coalesce ring offload identify nfc rxfh-indir ntuple
+
+# Set global order to default
+#ethtool_order="flash change-eeprom change pause coalesce ring offload identify nfc rxfh-indir ntuple"
+
+# Hypothetical network card that requires a change-eeprom toggle to enable flashing
+#ethtool_order_eth0="change-eeprom flash change pause coalesce ring offload nfc rxfh-indir ntuple"
+
 ##############################################################################
 # ADVANCED CONFIGURATION
-# 
+#
 # Four functions can be defined which will be called surrounding the
 # start/stop operations.  The functions are called with the interface
 # name first so that one function can control multiple adapters. An extra two
@@ -928,15 +1116,26 @@
 #
 # ${IFACE} is set to the interface being brought up/down
 # ${IFVAR} is ${IFACE} converted to variable name bash allows
+#
+# For historical and compatibility reasons, preup is actually normally called
+# in the following sequence: up ; preup ; up.
+# The first up causes the kernel to initialize the device, so
+# that it is available for use in the preup function.  However, for some
+# hardware, e.g. CAN devices, some configuration is needed before trying to up
+# the interface will actually work. For such hardware, the
+# up_before_preup variables will allow skipping the first up call if set
+# to yes.
+#up_before_preup_IFVAR="NO"
+#up_before_preup="NO"
 
 #preup() {
 #	# Test for link on the interface prior to bringing it up.  This
-#	# only works on some network adapters and requires the mii-diag
+#	# only works on some network adapters and requires the
-#	# package to be installed.
+#	# sys-apps/net-tools package to be installed.
 #	if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
 #		ewarn "No link on ${IFACE}, aborting configuration"
 #		return 1
-#	fi 
+#	fi
 #
 #	# Test for link on the interface prior to bringing it up.  This
 #	# only works on some network adapters and requires the ethtool
@@ -975,55 +1174,13 @@
 #	# This function could be used, for example, to register with a
 #	# dynamic DNS service.  Another possibility would be to
 #	# send/receive mail once the interface is brought up.
-
-#	# Here is an example that allows the use of iproute rules
-#	# which have been configured using the rules_eth0 variable.
-#	#rules_eth0=" \
-#	#	'from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100' \
-#	#	'from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100' \
-#	#"
-#	eval set -- $\rules_${IFVAR}
-#	if [ $# != 0 ]; then
-#		einfo "Adding IP policy routing rules"
-#		eindent
-#		# Ensure that the kernel supports policy routing
-#		if ! ip rule list | grep -q "^"; then
-#			eerror "You need to enable IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES)"
-#			eerror "in your kernel to use ip rules"
-#		else
-#			for x; do
-#				ebegin "${x}"
-#				ip rule add ${x} dev "${IFACE}"
-#				eend $?
-#			done
-#		fi
-#		eoutdent
-#		# Flush the cache
-#		ip route flush cache dev "${IFACE}"
-#	fi
-
 #}
 
 #postdown() {
 #	# Enable Wake-On-LAN for every interface except for lo
-#	# Probably a good idea to set RC_DOWN_INTERFACE="no" in /etc/conf.d/rc
+#	# Probably a good idea to set ifdown="no" in /etc/conf.d/net
 #	# as well ;)
 #	[ "${IFACE}" != "lo" ] && ethtool -s "${IFACE}" wol g
-
-#	Automatically erase any ip rules created in the example postup above
-#	if interface_exists "${IFACE}"; then
-#		# Remove any rules for this interface
-#		local rule
-#		ip rule list | grep " iif ${IFACE}[ ]*" | {
-#			while read rule; do
-#				rule="${rule#*:}"	
-#				ip rule del ${rule}
-#			done
-#		}
-#		# Flush the route cache
-#		ip route flush cache dev "${IFACE}"
-#	fi
-
 #	# Return 0 always
 #	return 0
 #}

etc/Makefile

@@ -1,7 +1,28 @@
 DIR=	${SYSCONFDIR}
-CONF=	rc.conf
+SRCS=	rc.conf.in rc.in rc.shutdown.in
+BIN=	${BIN-${OS}}
+CONF=	rc.conf ${BIN-${OS}}
+
+CLEANFILES+=	rc.conf
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+SED_EXTRA-FreeBSD=	-e 's:@TERM@:cons25:g'
+BIN-FreeBSD=		rc rc.shutdown rc.devd
+CONF-FreeBSD=		devd.conf
+
+SED_EXTRA-Linux=	-e 's:@TERM@:wsvt25:g'
+BIN-Linux=
+CONF-Linux=
+
+SED_EXTRA-NetBSD=	-e 's:@TERM@:wsvt25:g'
+BIN-NetBSD=		rc rc.shutdown
+CONF-NetBSD=
+
+SED_EXTRA=	${SED_EXTRA-${OS}}
+
 include ${MK}/scripts.mk
+
+rc.conf: rc.conf.in rc.conf.${OS}
+	${SED} ${SED_REPLACE} ${SED_EXTRA} $^ > $@

etc/Makefile.FreeBSD

@@ -1,4 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:cons25:g'
-SRCS+=		rc.conf.in rc.in rc.shutdown.in
-CONF+=		devd.conf
-BIN+=		rc rc.shutdown rc.devd

etc/Makefile.Linux

@@ -1,6 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
-SRCS+=		rc.in rc.shutdown.in
-
-rc.conf:
-	cp rc.conf.in rc.conf
-	cat rc.conf.Linux >> rc.conf

etc/Makefile.NetBSD

@@ -1,3 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
-SRCS+=		rc.conf.in rc.in rc.shutdown.in
-BIN+=		rc rc.shutdown

etc/rc.conf.FreeBSD

@@ -0,0 +1,12 @@
+##############################################################################
+# FreeBSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on FreeBSD:
+# ""        - nothing special
+# "jail"    - FreeBSD jails
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+

etc/rc.conf.Linux

@@ -1,25 +1,20 @@
-
 ##############################################################################
 # LINUX SPECIFIC OPTIONS
 
+# This is the subsystem type. Valid options on Linux:
+# ""        - nothing special
+# "lxc"     - Linux Containers
+# "openvz"  - Linux OpenVZ
+# "uml"     - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0"    - Xen0 Domain
+# "xenU"    - XenU Domain
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+
 # This is the number of tty's used in most of the rc-scripts (like
 # consolefont, numlock, etc ...)
 rc_tty_number=12
-
-# Use this variable to control the /dev management behavior.
-#  devfs  - use devfs (requires sys-fs/devfsd)
-#  mdev   - use mdev (requires sys-apps/busybox)
-#  udev   - use udev (requires sys-fs/udev)
-#  static - let the user manage /dev (YOU need to create ALL device nodes)
-# Leave it blank to let rc work it out (udev, mdev, devfs, static)
-#rc_devices=""
-
-# UDEV OPTION:
-# Set to "yes" if you want to save /dev to a tarball on shutdown
-# and restore it on startup.  This is useful if you have a lot of
-# custom device nodes that udev does not handle/know about.
-rc_device_tarball="NO"
-
-# Sets the level at which logging of messages is done to the
-# console.  See dmesg(8) for more info.
-dmesg_level="1"

etc/rc.conf.NetBSD

@@ -0,0 +1,13 @@
+##############################################################################
+# NetBSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on NetBSD:
+# ""        - nothing special
+# "xen0"    - Xen0 Domain
+# "xenU"    - XenU Domain
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+

etc/rc.conf.in

@@ -2,62 +2,92 @@
 
 # Set to "YES" if you want the rc system to try and start services
 # in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with it's name as the output will get
+# prefix the service output with its name as the output will get
 # jumbled up.
-rc_parallel="NO"
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
 
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
-# this feature.
+# this feature. This feature is automatically disabled if rc_parallel is
-rc_interactive="YES"
+# set to YES.
+#rc_interactive="YES"
 
-# Do we allow any started service in the runlevel to satisfy the depedency
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+#rc_shell=/bin/sh
+
+# Do we allow any started service in the runlevel to satisfy the dependency
 # or do we want all of them regardless of state? For example, if net.eth0
 # and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
 # both will be started, but services that depend on 'net' will work if either
 # one comes up. With rc_depend_strict="YES" we would require them both to
 # come up.
-rc_depend_strict="YES"
+#rc_depend_strict="YES"
 
-# Do we allow services to be hotplugged? If not, set to rc_hotplug="NO"
+# rc_hotplug is a list of services that we allow to be hotplugged.
-# NOTE: This does not affect anything hotplug/udev/devd related, just the
+# By default we do not allow hotplugging.
-# starting/stopping of the init.d service triggered by it.
+# A hotplugged service is one started by a dynamic dev manager when a matching
-rc_hotplug="YES"
+# hardware device is found.
-
+# This service is intrinsically included in the boot runlevel.
-# Dynamic /dev managers can trigger coldplug events which cause services to
+# To disable services, prefix with a !
-# start before we are ready for them. If this happens, we can defer these
+# Example - rc_hotplug="net.wlan !net.*"
-# services to start in the boot runlevel. Set rc_coldplug="NO" if you don't
-# want this.
-# NOTE: This also affects module coldplugging in udev-096 and higher
-# If you want module coldplugging but not coldplugging of services then you
-# can set rc_coldplug="YES" and rc_plug_services="!*"
-rc_coldplug="YES"
-
-# Some people want a finer grain over hotplug/coldplug. rc_plug_services is a
-# list of services that are matched in order, either allowing or not. By
-# default we allow services through as rc_coldplug/rc_hotplug has to be YES
-# anyway.
-# Example - rc_plug_services="net.wlan !net.*"
 # This allows net.wlan and any service not matching net.* to be plugged.
-rc_plug_services=""
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
 
 # rc_logger launches a logging daemon to log the entire rc process to
 # /var/log/rc.log
-rc_logger="NO"
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+#rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
 
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
-# rc_env_allow="VAR1 VAR2"
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
 
 ##############################################################################
 # MISC CONFIGURATION VARIABLES
 # There variables are shared between many init scripts
 
 # Set unicode to YES to turn on unicode support for keyboards and screens.
-unicode="NO"
+#unicode="NO"
 
-# Network fstypes. Below is the default.
+# Below is the default list of network fstypes.
-net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
 
 ##############################################################################
 # SERVICE CONFIGURATION VARIABLES
@@ -69,7 +99,7 @@ net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
 # We can set some things on a per service basis, like the nicelevel.
 #export SSD_NICELEVEL="-19"
 
-# Pass ulimit parameters 
+# Pass ulimit parameters
 #rc_ulimit="-u 30"
 
 # It's possible to define extra dependencies for services like so
@@ -89,3 +119,4 @@ net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
 # You can also remove dependencies.
 # This is mainly used for saying which servies do NOT provide net.
 #rc_net_tap0_provide="!net"
+

etc/rc.devd

@@ -1,6 +1,6 @@
 #!/bin/sh
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged
 export IN_BACKGROUND=yes

etc/rc.in

@@ -1,21 +1,18 @@
 #!@SHELL@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
 [ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
 
-# Handle interrupts 
+# Handle interrupts
 trap : SIGINT
 trap "echo 'Boot interrupted'; exit 1" SIGQUIT
 
-# BSD's init works somewhat differently to sysvinit.
+/sbin/rc sysinit || exit 1
-# This block should 'translate' from the way init calls it to the way it would
+/sbin/rc boot || exit 1
-# be called by sysvinit on linux.
+/sbin/rc default
-RUNLEVEL="1" /sbin/rc sysinit || exit 1
-RUNLEVEL="1" /sbin/rc boot || exit 1
-PREVLEVEL="1" /sbin/rc default
 
 # We don't actually care if rc default worked or not, we should exit 0
 # to allow logins

etc/rc.shutdown.in

@@ -1,8 +1,8 @@
 #!@SHELL@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
-# Handle interrupts 
+# Handle interrupts
 trap : SIGINT SIGQUIT
 
 # Try and use stuff in /lib over anywhere else so we can shutdown
@@ -14,13 +14,4 @@ export LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}"
 [ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
 
 action=${1:-shutdown}
-
-# BSD's init works somewhat differently to sysvinit.
-# This block should 'translate' from the way init calls it to the way it would
-# be called by sysvinit on linux.
-case "${action}" in
-	reboot) 	export RUNLEVEL=6;;
-	single)		export RUNLEVEL=S;;
-	*)		export RUNLEVEL=0;;
-esac
 exec /sbin/rc "${action}"

init.d.misc/.gitignore

@@ -1,5 +1,6 @@
 avahi-dnsconfd
 avahid
+dhcpcd
 dbus
 hald
 named
@@ -7,3 +8,4 @@ ntpd
 openvpn
 polkitd
 sshd
+wpa_supplicant

init.d.misc/Makefile

@@ -1,10 +1,11 @@
 DIR=	${INITDIR}
-SRCS=	avahi-dnsconfd.in avahid.in dbus.in hald.in named.in ntpd.in \
+SRCS=	avahi-dnsconfd.in avahid.in dhcpcd.in dbus.in \
-	openvpn.in polkitd.in sshd.in
+	hald.in named.in ntpd.in \
+	openvpn.in polkitd.in sshd.in wpa_supplicant.in
 
 MK=	../mk
 
 SED_EXTRA+= -e 's:@VARBASE@:/var:g'
 
+include ${MK}/os.mk
 include ${MK}/scripts.mk
-include Makefile.${OS}

init.d.misc/Makefile.FreeBSD

@@ -1 +0,0 @@
-PREFIX?=	/usr/local

init.d.misc/Makefile.Linux

@@ -1 +0,0 @@
-PREFIX=/usr

init.d.misc/Makefile.NetBSD

@@ -1 +0,0 @@
-PREFIX?=	/usr/pkg

init.d.misc/avahi-dnsconfd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-dnsconfd
-command_args="${avahi_dnsconfd_args} -D"
+command_args="$avahi_dnsconfd_args -D"
 pidfile=@VARBASE@/run/avahi-dnsconfd.pid
 name="Avahi DNS Configuration Daemon"
 

init.d.misc/avahid.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-daemon
-command_args="${avahid_args} -D"
+command_args="$avahid_args -D"
 pidfile=@VARBASE@/run/avahi-daemon/pid
 name="Avahi Service Advertisement Daemon"
 

init.d.misc/dbus.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/bin/dbus-daemon
 pidfile=@VARBASE@/run/dbus/pid

init.d.misc/dhcpcd.in

@@ -0,0 +1,27 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+command=/sbin/dhcpcd
+pidfile=/var/run/dhcpcd.pid
+command_args=-q
+name="DHCP Client Daemon"
+
+depend()
+{
+	provide net
+	need localmount
+	use logger
+	after bootmisc modules
+	before dns
+}
+
+stop_pre()
+{
+	# When shutting down, kill dhcpcd but preserve network
+	# We do this as /var/run/dhcpcd could be cleaned out when we
+	# return to multiuser.
+	if yesno $RC_GOINGDOWN; then
+		: ${stopsig:=SIGKILL}
+	fi
+}

init.d.misc/dnsmasq.in

@@ -1,16 +1,16 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/dnsmasq
-command_args=${dnsmasq_args}
+command_args=$dnsmasq_args
 pidfile=@VARBASE@/run/dnsmasq.pid
 required_files=/etc/dnsmasq.conf
 
 extra_started_commands="reload"
 
 depend()
-{	
+{
 	provide dns
 	need localmount net
 	after bootmisc
@@ -18,7 +18,7 @@ depend()
 
 reload()
 {
-	ebegin "Reloading ${RC_SVCNAME}"
+	ebegin "Reloading $RC_SVCNAME"
-	start-stop-daemon --signal SIGHUP --pidfile "${pidfile}"
+	start-stop-daemon --signal SIGHUP --pidfile "$pidfile"
 	eend $?
 }

init.d.misc/hald.in

@@ -1,10 +1,10 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/hald
 pidfile=@VARBASE@/run/hald/hald.pid
-command_args="${hald_args}"
+command_args=$hald_args
 name="Hardware Abstraction Layer Daemon"
 
 depend()

init.d.misc/named.in

@@ -1,16 +1,16 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/named
-command_args=${named_args}
+command_args=$named_args
 pidfile=@VARBASE@/run/named.pid
 name="Domain Name server"
 extra_started_commands="reload"
 
 namedb=/etc/namedb
 uid=named
-case "${RC_UNAME}" in
+case "$RC_UNAME" in
 	FreeBSD)
 		uid=bind
 		pidfile=@VARBASE@/run/named/pid
@@ -19,7 +19,7 @@ case "${RC_UNAME}" in
 		uid=bind
 		;;
 esac
-named_uid=${named_uid:-${uid}}
+: ${named_uid:=${uid}}
 
 depend()
 {
@@ -30,68 +30,71 @@ depend()
 
 start_pre()
 {
-	if [ -n "${named_chroot}" ]; then
+	if [ -n "$named_chroot" ]; then
 		# Create (or update) the chroot directory structure
 		if [ -r /etc/mtree/BIND.chroot.dist ]; then
-			mtree -deU -f /etc/mtree/BIND.chroot.dist -p "${named_chroot}"
+			mtree -deU -f /etc/mtree/BIND.chroot.dist -p "$named_chroot"
 		else
 			ewarn "/etc/mtree/BIND.chroot.dist missing,"
 			ewarn "chroot directory structure not updated"
 		fi
 
-		if [ ! -d "${named_chroot}"/. ]; then
+		if [ ! -d "$named_chroot"/. ]; then
-			eerror "chroot directory ${named_chroot} missing"
+			eerror "chroot directory $named_chroot missing"
 			exit 1
 		fi
 
 		# Create /etc/namedb symlink
-		if [ ! -L "${namedb}" ]; then
+		if [ ! -L "$namedb" ]; then
-			if [ -d "${namedb}" ]; then
+			if [ -d "$namedb" ]; then
-				ewarn "named chroot: ${namedb} is a directory!"
+				ewarn "named chroot: $namedb is a directory!"
-			elif [ -e "${namedb}" ]; then
+			elif [ -e "$namedb" ]; then
-				ewarn "named chroot: ${namedb} exists!"
+				ewarn "named chroot: $namedb exists!"
 			else
-				ln -s "${named_chroot}${namedb}" "${namedb}"
+				ln -s "$named_chroot$namedb" "$namedb"
 			fi
 		else
 			# Make sure it points to the right place.
-			ln -shf "${named_chroot}${namedb}" "${namedb}"
+			ln -shf "$named_chroot$namedb" "$namedb"
 		fi
 
-		case "${RC_UNAME}" in
+		case "$RC_UNAME" in
 			*BSD|DragonFly)
 				# Mount a devfs in the chroot directory if needed
-				umount "${named_chroot}"/dev 2>/dev/null
+				umount "$named_chroot"/dev 2>/dev/null
-				mount -t devfs dev "${named_chroot}"/dev
+				mount -t devfs dev "$named_chroot"/dev
-				devfs -m "${named_chroot}"/dev ruleset devfsrules_hide_all
+				devfs -m "$named_chroot"/dev \
-				devfs -m "${named_chroot}"/dev rule apply path null unhide
+					ruleset devfsrules_hide_all
-				devfs -m "${named_chroot}"/dev rule apply path random unhide
+				devfs -m "$named_chroot"/dev \
+					rule apply path null unhide
+				devfs -m "$named_chroot"/dev \
+					rule apply path random unhide
 				;;
 		esac
 
 		# Copy local timezone information if it is not up to date.
 		if [ -r /etc/localtime ]; then
-			cmp -s /etc/localtime "${named_chroot}/etc/localtime" ||
+			cmp -s /etc/localtime "$named_chroot/etc/localtime" ||
-			cp -p /etc/localtime "${named_chroot}/etc/localtime"
+			cp -p /etc/localtime "$named_chroot/etc/localtime"
 		fi
 
-		command_args="${command_args} -t ${named_chroot}"
+		command_args="$command_args -t $named_chroot"
 
-		ln -fs "${named_chroot}${pidfile}" "${pidfile}"
+		ln -fs "$named_chroot$pidfile" "$pidfile"
 	fi
 
-	if [ ! -s "${named_chroot}${namedb}/rndc.conf" ]; then
+	if [ ! -s "$named_chroot$namedb/rndc.conf" ]; then
-		local confgen="${command%/named}/rndc-confgen -a -b256 -u ${named_uid} \
+		local confgen="${command%/named}/rndc-confgen -a -b256 -u $named_uid \
-			-c ${named_chrootdir}/etc/namedb/rndc.key"
+			-c $named_chrootdir/etc/namedb/rndc.key"
-		if [ -s "${named_chroot}${namedb}/rndc.key" ]; then
+		if [ -s "$named_chroot$namedb/rndc.key" ]; then
 			local getuser="stat -f%Su"
-			[ "${RC_UNAME}" = "Linux" ] && getuser="stat -c%U"
+			[ "$RC_UNAME" = Linux ] && getuser="stat -c%U"
-			case $(${getuser} "${named_chroot}${namedb}"/rndc.key) in
+			case $(${getuser} "$named_chroot$namedb"/rndc.key) in
-				root|"${named_uid}");;
+				root|"$named_uid");;
-				*) ${confgen};;
+				*) $confgen;;
 			esac
 		else
-			${confgen}
+			$confgen
 		fi
 	fi
 }
@@ -103,7 +106,7 @@ reload()
 
 stop_post()
 {
-	if [ -n "${named_chroot}" -a -c "${named_chroot}"/dev/null ]; then
+	if [ -n "$named_chroot" -a -c "$named_chroot"/dev/null ]; then
-		umount "${named_chroot}"/dev 2>/dev/null || true
+		umount "$named_chroot"/dev 2>/dev/null || true
 	fi
 }

init.d.misc/ntpd.in

@@ -1,13 +1,14 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
-ntpd_config=${ntpd_config:-/etc/ntp.conf}
+: ${ntpd_config:=/etc/ntp.conf}
-ntpd_drift=${ntpd_drift:-/var/db/ntpd.drift}
+: ${ntpd_drift:=/var/db/ntpd.drift}
 
 command=/usr/sbin/ntpd
+required_files=$ntpd_config
 pidfile=/var/run/ntpd.pid
-command_args="${ntpd_args} -c ${ntpd_config} -f ${ntpd_drift} -p ${pidfile}"
+command_args="$ntpd_args -c $ntpd_config -f $ntpd_drift -p $pidfile"
 name="Network Time Protocol Daemon"
 
 depend()
@@ -19,22 +20,18 @@ depend()
 
 start_pre()
 {
-	if [ ! -r "${ntpd_config}" ]; then
+	if [ -n "$ntpd_chroot" ]; then
-		eerror "${ntpd_config} is not readable"
+		case "$RC_UNAME" in
-		return 1
-	fi
-
-	if [ -n "${ntpd_chroot}" ]; then
-		case "${RC_UNAME}" in
 			*BSD|DragonFly)
-				if [ ! -c "${ntpd_chroot}/dev/clockctl" ]; then
+				if [ ! -c "$ntpd_chroot/dev/clockctl" ]; then
-					rm -f "${ntpd_chroot}/dev/clockctl"
+					rm -f "$ntpd_chroot/dev/clockctl"
-					(cd /dev; /bin/pax -rw -pe clockctl "${ntpd_chroot}/dev")
+					(cd /dev; /bin/pax -rw -pe clockctl \
+					 "$ntpd_chroot/dev")
 				fi
 				;;
 		esac
-		ln -fs "${ntpd_chroot}${ntpd_drift}" "${ntpd_drift}"
+		ln -fs "$ntpd_chroot$ntpd_drift" "$ntpd_drift"
 
-		command_args="${command_args} -u ntpd:ntpd -i ${ntpd_chroot}"
+		command_args="$command_args -u ntpd:ntpd -i $ntpd_chroot"
 	fi
 }

init.d.misc/openvpn.in

@@ -1,31 +1,32 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 vpn=${RC_SVCNAME#*.}
 name="OpenVPN"
-[ "${vpn}" != "openvpn" ] && name="${name} (${vpn})"
+[ "$vpn" != openvpn ] && name="$name ($vpn)"
 command=@PKG_PREFIX@/sbin/openvpn
 
-pidfile=@VARBASE@/run/"${RC_SVCNAME}".pid
+pidfile=@VARBASE@/run/"$RC_SVCNAME".pid
-openvpn_dir=${openvpn_dir:-@PKG_PREFIX@/etc/openvpn}
+: ${openvpn_dir:=@PKG_PREFIX@/etc/openvpn}
-openvpn_config=${openvpn_config:-${openvpn_dir}/${vpn}.conf}
+: ${openvpn_config:=$openvpn_dir/$vpn.conf}
-command_args="${openvpn_args} --daemon --config ${openvpn_config} --writepid ${pidfile}"
+command_args="$openvpn_args --daemon --config $openvpn_config"
-required_dirs="${openvpn_dir}"
+command_args="$command_args --writepid $pidfile"
-required_files="${openvpn_config}"
+required_dirs=$openvpn_dir
+required_files=$openvpn_config
 
 # If we're an openvpn client, then supply a nice default config
 # You can find sample up/down scripts in the OpenRC support/openvpn dir
-if yesno "${openvpn_client}"; then
+if yesno $openvpn_client; then
-	openvpn_up=${openvpn_up:-${openvpn_dir}/up.sh}
+	: ${openvpn_up:=${openvpn_dir}/up.sh}
-	openvpn_down=${openvpn_down:-${openvpn_dir}/down.sh}
+	: ${openvpn_down:=${openvpn_dir}/down.sh}
-	command_args="${command_args} --nobind --up-delay --up-restart --down-pre"
+	command_args="$command_args --nobind --up-delay --up-restart --down-pre"
-	command_args="${command_args} --up ${openvpn_up}"
+	command_args="$command_args --up $openvpn_up"
-	command_args="${command_args} --down ${openvpn_down}"
+	command_args="$command_args --down $openvpn_down"
-	required_files="${required_files} ${openvpn_up} ${openvpn_down}"
+	required_files="$required_files $openvpn_up $openvpn_down"
-	
+
 	in_background_fake="start stop"
-	start_inactive="YES"
+	start_inactive=YES
 fi
 
 depend()
@@ -38,7 +39,7 @@ depend()
 start_pre()
 {
 	# Linux has good dynamic tun/tap creation
-	if [ "${RC_UNAME}" = "Linux" ]; then
+	if [ "$RC_UNAME" = Linux ]; then
 		if [ ! -e /dev/net/tun ]; then
 			if ! modprobe tun; then
 				eerror "TUN/TAP support is not available in this kernel"
@@ -58,10 +59,9 @@ start_pre()
 			sysctl -a | grep -q '\.tap\.' || kldload if_tap
 		fi
 	fi
-	
+
 	# If the config file does not specify the cd option, we do
-	# But if we specify it, we override the config option which we do not want
+	if ! grep -q "^[ \t]*cd[ \t].*" "$openvpn_config"; then
-	if ! grep -q "^[ \t]*cd[ \t].*" "${openvpn_config}"; then
+		command_args="$command_args --cd $openvpn_dir"
-		command_args="${command_args} --cd ${openvpn_dir}"
 	fi
 }

init.d.misc/polkitd.in

@@ -1,10 +1,10 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/polkitd
 pidfile=@VARBASE@/run/polkitd/polkitd.pid
-command_args="${polkitd_args}"
+command_args="$polkitd_args"
 name="PolicyKit Daemon"
 
 depend()

init.d.misc/sshd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/sshd
-command_args=${sshd_args}
+command_args=$sshd_args
 pidfile=@VARBASE@/run/sshd.pid
 required_files=/etc/ssh/sshd_config
 
@@ -31,5 +31,5 @@ start_pre()
 		eend $? || return 1
 	fi
 
-	${command} -t	
+	$command -t
 }

init.d.misc/wpa_supplicant.in

@@ -0,0 +1,70 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+command=/usr/sbin/wpa_supplicant
+: ${wpa_supplicant_conf:=/etc/wpa_supplicant.conf}
+wpa_supplicant_if=${wpa_supplicant_if:+-i}$wpa_supplicant_if
+command_args="$wpa_supplicant_args -B -c$wpa_supplicant_conf $wpa_supplicant_if"
+name="WPA Supplicant Daemon"
+
+depend()
+{
+	need localmount
+	use logger
+	after bootmisc modules
+	before dns dhcpcd net
+	keyword -shutdown
+}
+
+find_wireless()
+{
+	local iface=
+
+	case "$RC_UNAME" in
+	Linux)
+		for iface in /sys/class/net/*; do
+			if [ -e "$iface"/wireless -o \
+				-e "$iface"/phy80211 ]
+			then
+				echo "${iface##*/}"
+				return 0
+			fi
+		done
+		;;
+	*)
+		for iface in /dev/net/* $(ifconfig -l 2>/dev/null); do
+			if ifconfig "${iface##*/}" 2>/dev/null | \
+				grep -q "[ ]*ssid "
+			then
+				echo "${iface##*/}"
+				return 0
+			fi
+		done
+		;;
+	esac
+
+	return 1
+}
+
+append_wireless()
+{
+	local iface= i=
+
+	iface=$(find_wireless)
+	if [ -n "$iface" ]; then
+		for i in $iface; do
+			command_args="$command_args -i$i"
+		done
+	else
+		eerror "Could not find a wireless interface"
+	fi
+}
+
+start_pre()
+{
+	case " $command_args" in
+	*" -i"*) ;;
+	*) append_wireless;;
+	esac
+}

init.d/.gitignore

@@ -1,28 +1,43 @@
 bootmisc
 fsck
-halt.sh
 hostname
 local
 localmount
+moused
+net.lo
+net.lo0
 netmount
+network
 root
+savecache
 swap
+swapfiles
 sysctl
 urandom
+devfs
+dmesg
+hwclock
+consolefont
+keymaps
+killprocs
+modules
+mount-ro
+mtab
+numlock
+procfs
+staticroute
+sysfs
+devdb
 hostid
-moused
 newsyslog
 pf
 rarpd
 rc-enabled
 rpcbind
 savecore
+swap-blk
+swclock
 syslogd
-adjkerntz
+termencoding
-devd
+ttys
-dumpon
+wscons
-ipfw
-mixer
-nscd
-powerd
-syscons

init.d/Makefile

@@ -1,9 +1,42 @@
 DIR=	${INITDIR}
-SRCS=	bootmisc.in fsck.in halt.sh.in hostname.in local.in localmount.in \
+SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
-	netmount.in root.in swap.in sysctl.in urandom.in
+	network.in root.in savecache.in staticroute.in swap.in swapfiles.in \
+	swclock.in sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
+INSTALLAFTER=	_installafter_net.lo
+CLEANFILES+=	net.lo
+TARGETS+=	net.lo
+
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+NET_LO-FreeBSD=	net.lo0
+# Generic BSD scripts
+SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+		rpcbind.in savecore.in syslogd.in
+# These are FreeBSD specific
+SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
+		powerd.in syscons.in
+
+NET_LO-Linux=	net.lo
+SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
+		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
+		procfs.in sysfs.in termencoding.in
+
+NET_LO-NetBSD=	net.lo0
+# Generic BSD scripts
+SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+		rpcbind.in savecore.in syslogd.in
+# These are NetBSD specific
+SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
+
+%.in: %${SFX}
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@
+
 include ${MK}/scripts.mk
+
+_installafter_: realinstall
+
+_installafter_net.lo: realinstall
+	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO-${OS}}

init.d/Makefile.FreeBSD

@@ -1,11 +0,0 @@
-# Generic BSD scripts
-SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-	rpcbind.in savecore.in syslogd.in
-
-# These are FreeBSD specific
-SRCS+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
-	powerd.in syscons.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.Linux

@@ -1,6 +0,0 @@
-SRCS+=	hwclock.in consolefont.in keymaps.in modules.in mtab.in numlock.in \
-	procfs.in termencoding.in
-
-.SUFFIXES:	.Linux.in
-.Linux.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.NetBSD

@@ -1,10 +0,0 @@
-# Generic BSD scripts
-SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-	rpcbind.in savecore.in syslogd.in
-
-# These are NetBSD specific
-SRCS+=	swap-blk.in ttys.in wscons.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/adjkerntz.in

@@ -1,14 +1,14 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="save"
 
-description="Sets the local clock to UTC or Local Time." 
+description="Sets the local clock to UTC or Local Time."
 description_save="Saves the current time in the BIOS."
 
-clock=${clock:-${CLOCK:-UTC}}
+: ${clock:=${CLOCK:-UTC}}
-if [ "${clock}" = "UTC" ]; then
+if [ "$clock" = "UTC" ]; then
 	utc="UTC"
 else
 	utc="Local Time"
@@ -18,17 +18,17 @@ depend()
 {
 	provide clock
 	# BSD adjkerntz needs to be able to write to /etc
-	if [ "${clock}" = "UTC" -a -e /etc/wall_cmos_clock ] ||
+	if [ "$clock" = "UTC" -a -e /etc/wall_cmos_clock ] ||
-	   [ "${clock}" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
+	   [ "$clock" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
 		need root
 	fi
-	keyword nojail noprefix
+	keyword -jail
 }
 
 start()
-{	
+{
 	ebegin "Starting the System Clock Adjuster [${utc}]"
-	if [ "${clock}" != "UTC" ]; then
+	if [ "$clock" != "UTC" ]; then
 		echo >/etc/wall_cmos_clock
 		start-stop-daemon --start --exec /sbin/adjkerntz -- -i
 	else
@@ -48,8 +48,8 @@ save()
 stop()
 {
 	# Don't tweak the hardware clock on LiveCD halt.
-	if yesno "${clock_systohc:-${CLOCK_SYSTOHC}}"; then
+	if yesno "${clock_systohc:-$CLOCK_SYSTOHC}"; then
-	   [ -z "${CDBOOT}" ] && save
+	   [ -z "$CDBOOT" ] && save
 	fi
 
 	ebegin "Stopping the System Clock Adjuster"

init.d/bootmisc.in

@@ -1,147 +1,198 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 depend()
 {
-	use hostname
 	need localmount
 	before logger
 	after clock sysctl
-	keyword noprefix
+	keyword -timeout
 }
 
-dir_writeable()
+: ${wipe_tmp:=${WIPE_TMP:-yes}}
-{
+: ${log_dmesg:=${LOG_DMESG:-yes}}
-	mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
-}
 
 cleanup_tmp_dir()
 {
 	local dir="$1"
 
-	if ! [ -d "${dir}" ]; then
+	if ! [ -d "$dir" ]; then
-		mkdir -p "${dir}" || return $?
+		mkdir -p "$dir" || return $?
 	fi
-	dir_writeable "${dir}" || return 1
+	checkpath -W "$dir" || return 1
-	chmod +t "${dir}"
+	chmod a+rwt "$dir" 2> /dev/null
-	cd "${dir}"
+	cd "$dir" || return 1
-	if yesno ${wipe_tmp:-${WIPE_TMP:-yes}}; then
+	if yesno $wipe_tmp; then
-		ebegin "Wiping ${dir} directory"
+		ebegin "Wiping $dir directory"
-		local startopts="-x . -depth" delete="-exec rm -rf -- {} ;"
 
-		if [ "${RC_UNAME}" = "Linux" ]; then
+		# Faster than raw find
-			startopts=". -xdev -depth"
+		if ! rm -rf -- [^ajlq\.]* 2>/dev/null ; then
-			# busybox find / rm cannot handle --
+			# Blah, too many files
-			delete="-delete"
+			find . -maxdepth 1 -name '[^ajlq\.]*' -exec rm -rf -- {} +
 		fi
 
-		# Faster than find
+		# pam_mktemp creates a .private directory within which
-		rm -rf -- [b-ikm-pr-zA-Z0-9\.]*
+		# each user gets a private directory with immutable
+		# bit set; remove the immutable bit before trying to
+		# remove it.
+		[ -d /tmp/.private ] && chattr -R -a /tmp/.private 2> /dev/null
 
-		find ${startopts} ! -name . \
+		# Prune the paths that are left
-			! -path "./lost+found" \
+		find . -maxdepth 1 \
-			! -path "./lost+found/*" \
+			! -name . \
-			! -path "./quota.user" \
+			! -name lost+found \
-			! -path "./quota.user/*" \
+			! -name quota.user \
-			! -path "./aquota.user" \
+			! -name aquota.user \
-			! -path "./aquota.user/*" \
+			! -name quota.group \
-			! -path "./quota.group" \
+			! -name aquota.group \
-			! -path "./quota.group/*" \
+			! -name journal \
-			! -path "./aquota.group" \
+			-exec rm -rf -- {} +
-			! -path "./aquota.group/*" \
-			! -path "./journal" \
-			! -path "./journal/*" \
-			! -path "./.private" \
-			! -path "./.private/*" \
-			${delete} \
-			-type d -prune
 		eend 0
 	else
-		ebegin "Cleaning ${dir} directory"
+		ebegin "Cleaning $dir directory"
-		rm -rf -- "${dir}"/.X*-lock "${dir}"/esrv* "${dir}"/kio* \
+		rm -rf -- .X*-lock esrv* kio* \
-			"${dir}"/jpsock.* "${dir}"/.fam* "${dir}"/.esd* \
+			jpsock.* .fam* .esd* \
-			"${dir}"/orbit-* "${dir}"/ssh-* "${dir}"/ksocket-* \
+			orbit-* ssh-* ksocket-* \
-			"${dir}"/.*-unix
+			.*-unix
 		eend 0
 	fi
 }
 
+mkutmp()
+{
+	: >"$1"
+	# Not all systems have the utmp group
+	chgrp utmp "$1" 2>/dev/null
+	chmod 0664 "$1"
+}
+
+migrate_to_run()
+{
+	src="$1"
+	dst="$2"
+ 	if [ -L $src -a "$(readlink -f $src)" != $dst ]; then
+ 		ewarn "$src does not point to $dst."
+ 		ewarn "Setting $src to point to $dst."
+ 		rm $src
+ 	elif [ ! -L $src -a -d $src ]; then
+ 		ebegin "Migrating $src to $dst"
+ 		cp -a $src/* $dst/
+ 		rm -rf $src
+ 		eend $?
+ 	fi
+ 	# If $src doesn't exist at all, just run this
+ 	if [ ! -e $src ]; then
+ 		ln -s $dst $src
+ 	fi
+}
+
 start()
 {
-	local logw=false
+	# Remove any added console dirs
+	rm -rf "$RC_LIBEXECDIR"/console/*
+
+	local logw=false runw=false extra=
 	# Ensure that our basic dirs exist
-	for x in /var/log /var/run /tmp; do
+	if [ "$RC_UNAME" = Linux ]; then
-		if ! [ -d "${x}" ]; then
+		# Satisfy Linux FHS
-			if ! mkdir -p "${x}"; then
+		extra=/var/lib/misc
-				eend 1 "failed to create needed directory ${x}"
+		if [ ! -d /run ]; then
+			extra="/var/run $extra"
+		fi
+	else
+		extra=/var/run
+	fi
+	for x in /var/log /tmp $extra; do
+		if ! [ -d $x ]; then
+			if ! mkdir -p $x; then
+				eend 1 "failed to create needed directory $x"
 				return 1
 			fi
-		fi 
+		fi
 	done
 
-	if dir_writeable /var/run; then
+	if [ "$RC_UNAME" = Linux -a -d /run ] && false; then
+		migrate_to_run	/var/lock /run/lock
+		migrate_to_run	/var/run /run
+	fi
+
+	if checkpath -W /var/run; then
 		ebegin "Creating user login records"
-		cp /dev/null /var/run/utmp
+		local xtra=
-		if dir_writeable /var/log; then
+		[ "$RC_UNAME" = NetBSD ] && xtra=x
-			logw=true
+		for x in "" $xtra; do
-			[ -e /var/log/wtmp ] || cp /dev/null /var/log/wtmp
+			mkutmp /var/run/utmp$x
-			chmod 0644 /var/run/utmp /var/log/wtmp
+		done
-		fi
+		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
 		eend 0
 
 		ebegin "Cleaning /var/run"
 		for x in $(find /var/run ! -type d ! -name utmp \
-			! -name random-seed \
+			! -name random-seed ! -name dev.db \
 			! -name ld-elf.so.hints ! -name ld.so.hints);
-		do	
+		do
-			[ ! -f "${x}" ] && continue
+			# Clean stale sockets
+			if [ -S "$x" ]; then
+				if type fuser >/dev/null 2>&1; then
+					fuser "$x" >/dev/null 2>&1 || rm -- "$x"
+				else
+					rm -- "$x"
+				fi
+			fi
+			[ ! -f "$x" ] && continue
 			# Do not remove pidfiles of already running daemons
-			case "${x}" in
+			case "$x" in
 				*.pid)
 					start-stop-daemon --test --quiet \
-					--stop --pidfile "${x}" && continue
+					--stop --pidfile "$x" && continue
 				;;
 			esac
-			rm -f -- "${x}"
+			rm -f -- "$x"
 		done
 		eend 0
 	fi
 
 	# Clean up /tmp directories
 	local tmp=
-	for tmp in ${wipe_tmp_dirs-/tmp}; do
+	for tmp in ${clean_tmp_dirs:-${wipe_tmp_dirs-/tmp}}; do
-		cleanup_tmp_dir "${tmp}"
+		cleanup_tmp_dir "$tmp"
 	done
 
-	if dir_writeable /tmp; then
+	if checkpath -W /tmp; then
 		# Make sure our X11 stuff have the correct permissions
 		# Omit the chown as bootmisc is run before network is up
 		# and users may be using lame LDAP auth #139411
-		rm -rf /tmp/.ICE-unix /tmp/.X11-unix 
+		rm -rf /tmp/.ICE-unix /tmp/.X11-unix
 		mkdir -p /tmp/.ICE-unix /tmp/.X11-unix
 		chmod 1777 /tmp/.ICE-unix /tmp/.X11-unix
-		[ -x /sbin/restorecon ] && restorecon /tmp/.ICE-unix /tmp/.X11-unix
+		if [ -x /sbin/restorecon ]; then
-	fi
+			restorecon /tmp/.ICE-unix /tmp/.X11-unix
-
+		fi
-	if ${logw} || dir_writeable /var/log; then
+	fi
-		# Create an 'after-boot' dmesg log
+
-		if [ "${RC_SYS}" != "VSERVER" -a "${RC_SYS}" != "OPENVZ" ]; then
+	if yesno $log_dmesg; then
-			dmesg > /var/log/dmesg
+		if $logw || checkpath -W /var/log; then
-			chmod 640 /var/log/dmesg
+			# Create an 'after-boot' dmesg log
+			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
+				dmesg > /var/log/dmesg
+				chmod 640 /var/log/dmesg
+			fi
 		fi
 	fi
 
-	rm -f /etc/nologin
 	return 0
 }
 
 stop()
 {
 	# Write a halt record if we're shutting down
-	case "${RC_RUNLEVEL}" in
+	if [ "$RC_RUNLEVEL" = shutdown ]; then
-		reboot|shutdown) [ "${RC_UNAME}" = "Linux" ] && halt -w;;
+		[ "$RC_UNAME" = Linux ] && halt -w
-	esac
+		if [ "$RC_SYS" = OPENVZ ]; then
+			yesno $RC_REBOOT && printf "" >/reboot
+		fi
+	fi
 
 	return 0
 }

init.d/consolefont.in

@@ -1,33 +1,30 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Sets a font for the consoles."
 
 depend()
 {
 	need localmount termencoding
-	after hotplug
+	after hotplug bootmisc
-	keyword noopenvz noprefix nouml novserver noxenu
+	keyword -openvz -uml -vserver -xenu -lxc
 }
 
 start()
 {
-	# Forget about any font until we are successful
-	rm -rf "${RC_LIBDIR}"/console
-
 	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 	consolefont=${consolefont:-${CONSOLEFONT}}
 	unicodemap=${unicodemap:-${UNICODEMAP}}
 	consoletranslation=${consoletranslation:-${CONSOLETRANSLATION}}
 
-	if [ -z "${consolefont}" ]; then
+	if [ -z "$consolefont" ]; then
 		ebegin "Using the default console font"
 		eend 0
 		return 0
 	fi
 
-	if [ "${ttyn}" = 0 ]; then
+	if [ "$ttyn" = 0 ]; then
 		ebegin "Skipping font setup (rc_tty_number == 0)"
 		eend 0
 		return 0
@@ -36,39 +33,35 @@ start()
 	local x= param= sf_param= retval=0 ttydev=/dev/tty
 
 	# Get additional parameters
-	if [ -n "${consoletranslation}" ]; then
+	if [ -n "$consoletranslation" ]; then
-		param="${param} -m ${consoletranslation}"
+		param="$param -m $consoletranslation"
 	fi
 	if [ -n "${unicodemap}" ]; then
-		param="${param} -u ${unicodemap}"
+		param="$param -u $unicodemap"
 	fi
 
 	# Set the console font
-	ebegin "Setting console font [${consolefont}]"
+	ebegin "Setting console font [$consolefont]"
 	[ -d /dev/vc ] && ttydev=/dev/vc/
 	x=1
-	while [ ${x} -le ${ttyn} ]; do
+	while [ $x -le $ttyn ]; do
-		setfont ${consolefont} ${param} -C ${ttydev}${x} >/dev/null 
+		if ! setfont $consolefont $param -C $ttydev$x >/dev/null; then
-		retval=$((${retval} + $?))
+			retval=1
-		x=$((${x} + 1))
+			break
+		fi
+		: $(( x += 1 ))
 	done
-	eend ${retval}
+	eend $retval
 
 	# Store the last font so we can use it ASAP on boot
-	if [ ${retval} -eq 0 -a -w "${RC_LIBDIR}" ]; then
+	if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then
-		mkdir -p "${RC_LIBDIR}"/console
+		mkdir -p "$RC_LIBEXECDIR"/console
-		for font in /usr/share/consolefonts/"${consolefont}".*; do
+		for font in /usr/share/consolefonts/"$consolefont".*; do
 			:
 		done
-		cp "${font}" "${RC_LIBDIR}"/console
+		cp "$font" "$RC_LIBEXECDIR"/console
-		echo "${font##*/}" > "${RC_LIBDIR}"/console/font
+		echo "${font##*/}" >"$RC_LIBEXECDIR"/console/font
-		if yesno ${unicode:-${UNICODE}}; then
-			echo "" > "${RC_LIBDIR}"/console/unicode
-		else
-			rm -f "${RC_LIBDIR}"/console/unicode
-		fi
-
 	fi
 
-	return ${retval}
+	return $retval
 }

init.d/devd.in

@@ -1,16 +1,16 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/sbin/devd
-command_args=${devd_args}
+command_args=$devd_args
 name="Device State Change Daemon"
 
 depend() {
 	need localmount
 	after bootmisc
 	before net.lo0
-	keyword nojail noprefix
+	keyword -jail
 }
 
 start_pre() {

init.d/devdb.in

@@ -0,0 +1,21 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Creates the dev database"
+
+depend()
+{
+	need localmount
+}
+
+start()
+{
+	ebegin "Building the dev database"
+	if [ /var/run/dev.db -nt /dev ]; then
+		:
+	else
+		dev_mkdb
+	fi
+	eend $?
+}

init.d/devfs.in

@@ -0,0 +1,36 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Mount system critical filesystems in /dev."
+
+depend() {
+	use dev
+	keyword -vserver
+}
+
+start() {
+	# Mount required stuff as user may not have then in /etc/fstab
+	for x in \
+		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
+		"tmpfs /dev/shm 1777 ,nodev shm" \
+	; do
+		set -- $x
+		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
+		mountinfo -q $2 && continue
+
+		if [ ! -d $2 ]; then
+			mkdir -m $3 -p $2 >/dev/null 2>&1 || \
+				ewarn "Could not create $2!"
+		fi
+
+		if [ -d $2 ]; then
+			ebegin "Mounting $2"
+			if ! fstabinfo --mount $2; then
+				mount -n -t $1 -o noexec,nosuid$4 $5 $2
+			fi
+			eend $?
+		fi
+	done
+	return 0
+}

init.d/dmesg.in

@@ -0,0 +1,18 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Set the dmesg level for a cleaner boot"
+
+depend()
+{
+	before dev modules
+	keyword -vserver
+}
+
+start()
+{
+	if [ -n "$dmesg_level" ]; then
+		dmesg -n$dmesg_level
+	fi
+}

init.d/dumpon.in

@@ -1,25 +1,25 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Configures a specific kernel dump device."
 
 depend() {
 	need swap
-	keyword nojail noprefix
+	keyword -jail
 }
 
 start() {
 	# Setup any user requested dump device
-	if [ -n "${dump_device}" ]; then
+	if [ -n "$dump_device" ]; then
-		ebegin "Activating kernel core dump device (${dump_device})"
+		ebegin "Activating kernel core dump device ($dump_device)"
 		dumpon ${dump_device}
 		eend $?
 	fi
 }
 
 stop() {
-	ebegin "Deactiving kernel core dump device"
+	ebegin "Deactivating kernel core dump device"
 	dumpon off
 	eend $?
 }

init.d/fsck.in

@@ -1,15 +1,15 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Check and repair filesystems according to /etc/fstab"
-_ISF="
+_IFS="
 "
 
 depend()
 {
-	after clock modules
+	use dev clock modules
-	keyword nojail noopenvz noprefix notimeout novserver
+	keyword -jail -openvz -timeout -vserver -lxc
 }
 
 _abort() {
@@ -19,62 +19,93 @@ _abort() {
 
 # We should only reboot when first booting
 _reboot() {
-	if [ "${RC_RUNLEVEL}" = "${RC_BOOTLEVEL}" ]; then
+	if [ "$RC_RUNLEVEL" = "$RC_BOOTLEVEL" ]; then
 		reboot "$@"
 		_abort || return 1
 	fi
 }
 
+_forcefsck()
+{
+	[ -e /forcefsck ] || get_bootparam forcefsck
+}
+
 start()
 {
-	local reboot_opts= fsck_opts= p= check_extra=
+	local fsck_opts= p= check_extra=
 
 	if [ -e /fastboot ]; then
 		ewarn "Skipping fsck due to /fastboot"
 		return 0
 	fi
-	if [ -e /forcefsck ]; then
+	if _forcefsck; then
-		fsck_opts="${fsck_opts} -f"
+		fsck_opts="$fsck_opts -f"
 		check_extra="(check forced)"
+	elif ! yesno ${fsck_on_battery:-YES} && ! on_ac_power; then
+		ewarn "Skipping fsck due to not being on AC power"
+		return 0
 	fi
 
-	if [ -n "${fsck_passno}" ]; then
+	if [ -n "$fsck_passno" ]; then
-		check_extra="[passno ${fsck_passno}] ${check_extra}"
+		check_extra="[passno $fsck_passno] $check_extra"
+		if [ -n "$fsck_mnt" ]; then
+			eerror "Only 1 of fsck_passno and fsck_mnt must be set!"
+			return 1
+		fi
 	fi
-	ebegin "Checking local filesystems ${check_extra}"
+	ebegin "Checking local filesystems $check_extra"
-	for p in ${fsck_passno}; do
+	# Append passno mounts
-		local IFS="${_IFS}"
+	for p in $fsck_passno; do
-		case "${p}" in
+		local IFS="$_IFS"
-			[0-9]*) p="=${p}";;
+		case "$p" in
+			[0-9]*) p="=$p";;
 		esac
-		set -- "$@" "$(fstabinfo --passno "${p}")"
+		set -- "$@" $(fstabinfo --passno "$p")
+		unset IFS
+	done
+	# Append custom mounts
+	for m in $fsck_mnt ; do
+		local IFS="$_IFS"
+		set -- "$@" "$m"
 		unset IFS
 	done
 
-	if [ "${RC_UNAME}" = "Linux" ]; then
+	if [ "$RC_UNAME" = Linux ]; then
-		fsck_opts="${fsck_opts} -C0 -T"
+		fsck_opts="$fsck_opts -C0 -T"
-		if [ -z "${fsck_passno}" ]; then
+		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
 			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
-				fsck_opts="${fsck_opts} -R"
+				fsck_opts="$fsck_opts -R"
 			fi
 		fi
-		reboot_opts="-f"
 	fi
 
-	trap : QUIT
+	trap : INT QUIT
-	fsck ${fsck_args--p} ${fsck_opts} "$@"
+	fsck ${fsck_args--p} $fsck_opts "$@"
 	case $? in
-		0)       eend 0; return 0;;
+	0)	eend 0; return 0;;
-		1)       ewend 1 "Filesystems repaired"; return 0;;
+	1)	ewend 1 "Filesystems repaired"; return 0;;
-		2|3|4)   ewend 1 "Filesystems repaired, but reboot needed"
+	2|3)	if [ "$RC_UNAME" = Linux ]; then
-		         _reboot ${reboot_opts} || return 1;;
+		 	ewend 1 "Filesystems repaired, but reboot needed"
-		8)       ewend 1 "Operational error"; return 0;;
+	         	_reboot -f
-		12)      ewend 1 "fsck interupted"; return 1;;
+		else
-		*)       eend 2 "Filesystems couldn't be fixed"
+			ewend 1 "Filesystems still have errors;" \
-		         _abort || return 1;;
+				"manual fsck required"
+			_abort
+		fi;;
+	4)	if [ "$RC_UNAME" = Linux ]; then
+			ewend 1 "Fileystem errors left uncorrected, aborting"
+			_abort
+		else
+		 	ewend 1 "Filesystems repaired, but reboot needed"
+			_reboot
+		fi;;
+	8)	ewend 1 "Operational error"; return 0;;
+	12)	ewend 1 "fsck interrupted";;
+	*)	eend 2 "Filesystems couldn't be fixed";;
 	esac
+	_abort || return 1
 }
 
 stop()
@@ -82,7 +113,8 @@ stop()
 	# Fake function so we always shutdown correctly.
 	_abort() { return 0; }
 	_reboot() { return 0; }
+	_forcefsck() { return 1; }
 
-	yesno "${fsck_shutdown}" && start
+	yesno $fsck_shutdown && start
 	return 0
 }

init.d/halt.sh.in

@@ -1,100 +0,0 @@
-#!@SHELL@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-. @SYSCONFDIR@/init.d/functions.sh
-. "${RC_LIBDIR}"/sh/rc-functions.sh
-[ -r @SYSCONFDIR@/rc.conf ] && . @SYSCONFDIR@/rc.conf
-
-# Support LiveCD foo
-if [ -r /sbin/livecd-functions.sh ]; then
-	. /sbin/livecd-functions.sh
-	livecd_read_commandline
-fi
-
-stop_addon devfs
-stop_addon udev
-
-# Really kill things off before unmounting
-if [ -x /sbin/killall5 ]; then
-	killall5 -15
-	killall5 -9
-fi
-
-# Flush all pending disk writes now
-sync; sync
-
-# If we are in a VPS, we don't need anything below here, because
-#   1) we don't need (and by default can't) umount anything (VServer) or
-#   2) the host utils take care of all umounting stuff (OpenVZ)
-if [ "${RC_SYS}" = "VSERVER" -o "${RC_SYS}" = "OPENVZ" ]; then
-	[ "${RC_SYS}" = "OPENVZ" -a "$1" = "reboot" ] && echo "" > /reboot
-	if [ -e @SYSCONFDIR@/init.d/"$1".sh ]; then
-		. @SYSCONFDIR@/init.d/"$1".sh
-	else
-		exit 0
-	fi
-fi
-
-# If $svcdir is still mounted, preserve it if we can
-mnt=$(mountinfo --node "${RC_SVCDIR}")
-if [ -n "${mnt}" -a -w "${RC_LIBDIR}" ]; then
-	f_opts="-m -c"
-	[ "${RC_UNAME}" = "Linux" ] && f_opts="-c"
-	if type fuser >/dev/null 2>&1; then
-		if [ -n "$(fuser ${f_opts} "${svcdir}" 2>/dev/null)" ]; then
-			fuser -k ${f_opts} "${svcdir}" >/dev/null 2>&1
-			sleep 2
-		fi
-	fi
-	cp -p "${RC_SVCDIR}"/deptree "${RC_SVCDIR}"/depconfig \
-		"${RC_SVCDIR}"/softlevel "${RC_SVCDIR}"/nettree \
-		"${RC_SVCDIR}"/rc.log \
-		"${RC_LIBDIR}" 2>/dev/null
-	umount "${RC_SVCDIR}"
-	rm -rf "${RC_SVCDIR}"/*
-	# Pipe errors to /dev/null as we may have future timestamps
-	cp -p "${RC_LIBDIR}"/deptree "${RC_LIBDIR}"/depconfig \
-		"${RC_LIBDIR}"/softlevel "${RC_LIBDIR}"/nettree \
-		"${RC_LIBDIR}"/rc.log \
-		"${RC_SVCDIR}" 2>/dev/null
-	rm -f "${RC_LIBDIR}"/deptree "${RC_LIBDIR}"/depconfig \
-		"${RC_LIBDIR}"/softlevel "${RC_LIBDIR}"/nettree \
-		"${RC_LIBDIR}"/rc.log
-	# Release the memory disk if we used it
-	case "${mnt}" in
-		"/dev/md"[0-9]*) mdconfig -d -u "${mnt#/dev/md*}";;
-	esac
-fi
-
-unmounted=0
-# Remount the remaining filesystems read-only
-# Most BSD's don't need this as the kernel handles it nicely
-if [ "${RC_UNAME}" = "Linux" ]; then
-	ebegin "Remounting remaining filesystems read-only"
-	# We need the do_unmount function
-	. "${RC_LIBDIR}"/sh/rc-mount.sh
-	eindent
-	fs=
-	for x in ${net_fs_list}; do
-		fs="${fs}${fs:+|}${x}"
-	done
-	[ -n "${fs}" ] && fs="^(${fs})$"
-	do_unmount "mount -n -o remount,ro" \
-		--skip-point-regex "^(/dev|/dev/.*|/proc|/proc/.*|/sys|/sys/.*)$" \
-		${fs:+--skip-fstype-regex} ${fs} --nonetdev
-	eoutdent
-	eend $?
-	unmounted=$?
-fi
-
-if [ ${unmounted} -ne 0 ]; then
-	[ -x /sbin/sulogin ] && sulogin -t 10 /dev/console
-	exit 1
-fi
-
-# Load the final script - not needed on BSD so they should not exist
-[ -e @SYSCONFDIR@/init.d/"$1".sh ] && . @SYSCONFDIR@/init.d/"$1".sh
-
-# Always exit 0 here
-exit 0

init.d/hostid.in

@@ -1,15 +1,15 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="reset"
-hostid_file=${hostid_file:-/etc/hostid}
+: ${hostid_file:=/etc/hostid}
 
 depend()
 {
-	need root
+	use root
 	before devd net
-	keyword nojail noprefix
+	keyword -jail
 }
 
 _set()
@@ -20,14 +20,14 @@ _set()
 		id=$(echo "$1" | md5)
 		id="0x${id%????????????????????????}"
 	fi
-	ebegin "Setting Host ID: ${id}"
+	ebegin "Setting Host ID: $id"
-	sysctl -w kern.hostid="${id}" >/dev/null
+	sysctl -w kern.hostid="$id" >/dev/null
 	eend $? || return 1
 
 	if sysctl -n kern.hostuuid >/dev/null 2>&1; then
 		[ -n "$1" ] && id=$1
-		ebegin "Setting Host UUID: ${id}"
+		ebegin "Setting Host UUID: $id"
-		sysctl kern.hostuuid="${id}" >/dev/null
+		sysctl kern.hostuuid="$id" >/dev/null
 		eend $? || return 1
 	fi
 
@@ -38,35 +38,37 @@ _set()
 # otherwise we generate a random UUID.
 reset()
 {
-	local uuid=$(kenv smbios.system.uuid 2>/dev/null)
+	local uuid= x="[0-9a-f]" y="$x$x$x$x"
-	local x="[0-9a-f]"
+
-	local y="${x}${x}${x}${x}"
+	if type kenv >/dev/null 2>&1; then
-	case "${uuid}" in
+		uuid=$(kenv smbios.system.uuid 2>/dev/null)
-		${y}${y}-${y}-${y}-${y}-${y}${y}${y});;
+	fi
+	case "$uuid" in
+		$y$y-$y-$y-$y-$y$y$y);;
 		*) uuid=;;
 	esac
 
-	if [ -n "${uuid}" ]; then
+	if [ -n "$uuid" ]; then
-		rm -f "${hostid_file}"
+		rm -f "$hostid_file"
 	else
 		uuid=$(uuidgen)
-		if [ -z "${uuid}" ]; then
+		if [ -z "$uuid" ]; then
 			eerror "Unable to generate a UUID"
 			return 1
 		fi
-		if ! echo "${uuid}" > "${hostid_file}"; then
+		if ! echo "$uuid" >"$hostid_file"; then
-			eerror "Failed to store UUID in \`${hostid_file}'"
+			eerror "Failed to store UUID in \`$hostid_file'"
 			return 1
 		fi
 	fi
 
-	_set "${uuid}"
+	_set "$uuid"
 }
 
 start()
 {
-	if [ -r "${hostid_file}" ]; then
+	if [ -r "$hostid_file" ]; then
-		_set $(cat "${hostid_file}") 
+		_set $(cat "$hostid_file")
 	else
 		reset
 	fi

init.d/hostname.in

@@ -1,17 +1,17 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword noprefix
+	keyword -lxc
 }
 
 start()
 {
 	hostname=${hostname-${HOSTNAME-localhost}}
-	ebegin "Setting hostname to ${hostname}"
+	ebegin "Setting hostname to $hostname"
-	hostname "${hostname}"
+	hostname "$hostname"
 	eend $? "Failed to set the hostname"
 }

init.d/hwclock.in

@@ -1,19 +1,18 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="save show"
 
-description="Sets the local clock to UTC or Local Time." 
+description="Sets the local clock to UTC or Local Time."
 description_save="Saves the current time in the BIOS."
 description_show="Displays the current time in the BIOS."
 
-clock_adjfile=${clock_adjfile:-${CLOCK_ADJFILE}}
+: ${clock_adjfile:=${CLOCK_ADJFILE}}
-clock_args=${clock_args:-${CLOCK_OPTS}}
+: ${clock_args:=${CLOCK_OPTS}}
-clock_systohc=${clock_systohc:-${CLOCK_SYSTOHC}}
+: ${clock_systohc:=${CLOCK_SYSTOHC}}
-
+: ${clock:=${CLOCK:-UTC}}
-clock=${clock:-${CLOCK:-UTC}}
+if [ "$clock" = "UTC" ]; then
-if [ "${clock}" = "UTC" ]; then
 	utc="UTC"
 	utc_cmd="--utc"
 else
@@ -24,12 +23,12 @@ fi
 depend()
 {
 	provide clock
-	if yesno ${clock_adjfile}; then
+	if yesno $clock_adjfile; then
 		use root
 	else
 		before *
 	fi
-	keyword noopenvz noprefix nouml novserver noxenu
+	keyword -openvz -uml -vserver -xenu -lxc
 }
 
 setupopts()
@@ -47,7 +46,7 @@ setupopts()
 			;;
 	esac
 
-	case "${utc}" in
+	case "$utc" in
 		UTC|Local" "Time);;
 		*) unset utc_cmd;;
 	esac
@@ -58,7 +57,7 @@ _hwclock()
 {
 	local err="$(hwclock "$@" 2>&1 >/dev/null)"
 
-	[ -z "${err}" ] && return 0
+	[ -z "$err" ] && return 0
 	echo "${err}" >&2
 	return 1
 }
@@ -68,32 +67,42 @@ start()
 	local retval=0 errstr=""
 	setupopts
 
-	if [ -z "${utc_cmd}" ]; then
+	if [ -z "$utc_cmd" ]; then
-		ewarn "Not setting clock for ${utc} system"
+		ewarn "Not setting clock for $utc system"
 		return 0
 	fi
 
-	ebegin "Setting system clock using the hardware clock [${utc}]"
+	ebegin "Setting system clock using the hardware clock [$utc]"
-	if [ -e /proc/modules -a ! -e /dev/rtc ]; then
+	if [ -e /proc/modules ]; then
-		modprobe -q rtc || modprobe -q genrtc
+		local rtc=
+		for rtc in /dev/rtc /dev/rtc[0-9]*; do
+			[ -e "$rtc" ] && break
+		done
+		if [ ! -e "${rtc}" ]; then
+			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
+		fi
 	fi
 
-	if [ -e /etc/adjtime ] && yesno ${clock_adjfile}; then
+	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
-		_hwclock --adjust ${utc_cmd}
+		_hwclock --adjust $utc_cmd
-		retval=$((${retval} + $?))
+		: $(( retval += $? ))
 	fi
-	
+
 	# If setting UTC, don't bother to run hwclock when first booting
 	# as that's the default
-	if [ "${PREVLEVEL}" != "N" -o \
+	if [ "$PREVLEVEL" != N -o \
-		"${utc_cmd}" != "--utc" -o \
+		"$utc_cmd" != --utc -o \
-		-n "${clock_args}" ];
+		-n "$clock_args" ];
 	then
-		_hwclock --hctosys ${utc_cmd} ${clock_args}
+		if yesno ${clock_hctosys:-YES}; then
-		retval=$((${retval} + $?))
+			_hwclock --hctosys $utc_cmd $clock_args
+		else
+			_hwclock --systz $utc_cmd $clock_args
+		fi
+		: $(( retval += $? ))
 	fi
-	
+
-	eend ${retval} "Failed to set the system clock"
+	eend $retval "Failed to set the system clock"
 
 	return 0
 }
@@ -101,37 +110,37 @@ start()
 stop()
 {
 	# Don't tweak the hardware clock on LiveCD halt.
-	[ -n "${CDBOOT}" ] && return 0
+	[ -n "$CDBOOT" ] && return 0
-	yesno ${clock_systohc} || return 0
+	yesno ${clock_systohc:-YES} || return 0
 
 	local retval=0 errstr=""
 	setupopts
 
-	[ -z "${utc_cmd}" ] && return 0
+	[ -z "$utc_cmd" ] && return 0
 
-	ebegin "Setting hardware clock using the system clock" "[${utc}]"
+	ebegin "Setting hardware clock using the system clock" "[$utc]"
 
-	if ! yesno "${clock_adjfile}"; then
+	if ! yesno $clock_adjfile; then
 		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help | grep -q "\-\-noadjfile"; then
+		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
-			utc_cmd="${utc_cmd} --noadjfile"
+			utc_cmd="$utc_cmd --noadjfile"
 		fi
 	fi
 
-	_hwclock --systohc ${utc_cmd} ${clock_args}
+	_hwclock --systohc $utc_cmd $clock_args
 	retval=$?
 
-	eend ${retval} "Failed to sync clocks" 
+	eend $retval "Failed to sync clocks"
 }
 
 save()
 {
-	clock_systohc="yes"
+	clock_systohc=yes
 	stop
 }
 
 show()
 {
 	setupopts
-	hwclock --show "${utc_cmd}" ${clock_args} 
+	hwclock --show "$utc_cmd" $clock_args
 }

init.d/ipfw.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
 
@@ -13,13 +13,17 @@ opts="panic showstatus"
 depend() {
 	before net
 	provide firewall
-	keyword nojail
+	keyword -jail
 }
 
 ipfw() {
 	/sbin/ipfw -f -q "$@"
 }
 
+have_ip6() {
+	sysctl net.ipv6 2>/dev/null
+}
+
 init() {
 	# Load the kernel module
 	if ! sysctl net.inet.ip.fw.enable=1 >/dev/null 2>&1; then
@@ -36,13 +40,15 @@ init() {
 	ipfw add deny all from any to 127.0.0.0/8
 	ipfw add deny ip from 127.0.0.0/8 to any
 
-	ipfw add pass ip6 from any to any via lo0
+	if have_ip6; then
-	ipfw add deny ip6 from any to ::1
+		ipfw add pass ip6 from any to any via lo0
-	ipfw add deny ip6 from ::1 to any
+		ipfw add deny ip6 from any to ::1
-	
+		ipfw add deny ip6 from ::1 to any
-	ipfw add pass ip6 from :: to ff02::/16 proto ipv6-icmp
+
-	ipfw add pass ip6 from fe80::/10 to fe80::/10 proto ipv6-icmp
+		ipfw add pass ip6 from :: to ff02::/16 proto ipv6-icmp
-	ipfw add pass ip6 from fe80::/10 to ff02::/16 proto ipv6-icmp
+		ipfw add pass ip6 from fe80::/10 to fe80::/10 proto ipv6-icmp
+		ipfw add pass ip6 from fe80::/10 to ff02::/16 proto ipv6-icmp
+	fi
 }
 
 start() {
@@ -53,7 +59,7 @@ start() {
 		return 1
 	fi
 
-	# Use a statefull firewall
+	# Use a stateful firewall
 	ipfw add check-state
 	ipfw add pass tcp from me to any established
 
@@ -62,67 +68,71 @@ start() {
 	ipfw add pass udp  from me  to any       keep-state
 	ipfw add pass icmp from me  to any       keep-state
 
-	ipfw add pass tcp  from me6 to any setup keep-state
+	if have_ip6; then
-	ipfw add pass udp  from me6 to any       keep-state
+		ipfw add pass tcp  from me6 to any setup keep-state
-	ipfw add pass icmp from me6 to any       keep-state
+		ipfw add pass udp  from me6 to any       keep-state
+		ipfw add pass icmp from me6 to any       keep-state
+	fi
 
 	# Allow DHCP.
 	ipfw add pass udp  from 0.0.0.0 68 to 255.255.255.255 67 out
 	ipfw add pass udp  from any 67     to me 68 in
 	ipfw add pass udp  from any 67     to 255.255.255.255 68 in
-	# Some servers will ping the IP while trying to decide if it's 
+	# Some servers will ping the IP while trying to decide if it's
 	# still in use.
 	ipfw add pass icmp from any to any icmptype 8
 
 	# Allow "mandatory" ICMP in.
 	ipfw add pass icmp from any to any icmptype 3,4,11
 
-	# Allow ICMPv6 destination unreach
+	if have_ip6; then
-	ipfw add pass ip6 from any to any icmp6types 1 proto ipv6-icmp
+		# Allow ICMPv6 destination unreach
+		ipfw add pass ip6 from any to any icmp6types 1 proto ipv6-icmp
+
+		# Allow NS/NA/toobig (don't filter it out)
+		ipfw add pass ip6 from any to any icmp6types 2,135,136 proto ipv6-icmp
+	fi
 
-	# Allow NS/NA/toobig (don't filter it out)
-	ipfw add pass ip6 from any to any icmp6types 2,135,136 proto ipv6-icmp
-	
 	# Add permits for this workstations published services below
 	# Only IPs and nets in firewall_allowservices is allowed in.
-	for i in ${ipfw_ip_in}; do
+	for i in $ipfw_ip_in; do
-		for p in ${ipfw_ports_in}; do
+		for p in $ipfw_ports_in; do
-			ipfw add pass tcp from ${i} to me ${p}
+			ipfw add pass tcp from $i to me $p
 		done
 	done
 
 	# Allow all connections from trusted IPs.
 	# Playing with the content of firewall_trusted could seriously
 	# degrade the level of protection provided by the firewall.
-	for i in ${ipfw_ip_trust}; do
+	for i in $ipfw_ip_trust; do
-		ipfw add pass ip from ${i} to me
+		ipfw add pass ip from $i to me
 	done
-	
+
 	ipfw add 65000 count ip from any to any
 
 	# Drop packets to ports where we don't want logging
-	for p in ${ipfw_ports_nolog}; do
+	for p in $ipfw_ports_nolog; do
-		ipfw add deny { tcp or udp } from any to any ${p} in
+		ipfw add deny { tcp or udp } from any to any $p in
 	done
 
 	# Broadcasts and muticasts
 	ipfw add deny ip from any to 255.255.255.255
-	ipfw add deny ip from any to 224.0.0.0/24 
+	ipfw add deny ip from any to 224.0.0.0/24
 
 	# Noise from routers
 	ipfw add deny udp from any to any 520 in
 
 	# Noise from webbrowsing.
-	# The statefull filter is a bit agressive, and will cause some
+	# The stateful filter is a bit aggressive, and will cause some
 	# connection teardowns to be logged.
 	ipfw add deny tcp from any 80,443 to any 1024-65535 in
 
 	# Deny and (if wanted) log the rest unconditionally.
 	if yesno ${ipfw_log_deny:-no}; then
-		log="log"
+		log=log
 		sysctl net.inet.ip.fw.verbose=1 >/dev/null
 	fi
-	ipfw add deny ${log} ip from any to any
+	ipfw add deny $log ip from any to any
 
 	eend 0
 }

init.d/keymaps.in

@@ -1,26 +1,27 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Applies a keymap for the consoles."
 
-ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
-unicode=${unicode:-${UNICODE}}
-keymap=${keymap:-${KEYMAP}}
-extended_keymaps=${extended_keymaps:-${EXTENDED_KEYMAPS}}
-windowkeys=${windowkeys:-${SET_WINDOWSKEYS}} 
-fix_euro=${fix_euro:-${FIX_EURO}}
-dumpkeys_charset=${dumpkeys_charset:-${DUMPKEYS_CHARSET}}
-
 depend()
 {
 	need localmount termencoding
-	keyword noopenvz noprefix nouml novserver noxenu
+	after bootmisc
+	keyword -openvz -uml -vserver -xenu -lxc
 }
 
 start()
 {
-	if [ -z "${keymap}" ]; then
+	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
+	: ${unicode:=$UNICODE}
+	: ${keymap:=$KEYMAP}
+	: ${extended_keymaps:=$EXTENDED_KEYMAPS}
+	: ${windowkeys:=$SET_WINDOWSKEYS}
+	: ${fix_euro:=$FIX_EURO}
+	: ${dumpkeys_charset:=${DUMPKEYS_CHARSET}}
+
+	if [ -z "$keymap" ]; then
 		eerror "You need to setup keymap in /etc/conf.d/keymaps first"
 		return 1
 	fi
@@ -33,35 +34,37 @@ start()
 		echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
 	fi
 
-	ebegin "Loading key mappings [${keymap}]"
+	local wkeys= kmode="-a" msg="ASCII"
-	local loadkeys_uni= wkeys= kmode="-a" msg="ASCII"
+	if yesno $unicode; then
-	if yesno ${unicode}; then
-		loadkeys_uni="--unicode"
 		kmode="-u"
 		msg="UTF-8"
 	fi
-	yesno ${windowkeys} && wkeys="windowkeys"
+	yesno $windowkeys && wkeys="windowkeys"
-	loadkeys -q ${loadkeys_uni} ${wkeys} ${keymap} ${extended_keymaps} 
+
+	# Set terminal encoding to either ASCII or UNICODE.
+	# See utf-8(7) for more information.
+	ebegin "Setting keyboard mode [$msg]"
+	n=1
+	while [ $n -le $ttyn ]; do
+		kbd_mode $kmode -C $ttydev$n
+		: $(( n += 1 ))
+	done
+	eend 0
+
+	ebegin "Loading key mappings [$keymap]"
+	loadkeys -q $wkeys $keymap $extended_keymaps
 	eend $? "Error loading key mappings" || return $?
 
-	if yesno ${fix_euro}; then
+	if yesno $fix_euro; then
 		ebegin "Fixing font for euro symbol"
 		# Fix some fonts displaying the Euro, #173528.
 		echo "altgr keycode 18 = U+20AC" | loadkeys -q
 		eend $?
 	fi
 
-	# Set terminal encoding to either ASCII or UNICODE.
+	# Save the keymapping for use immediately at boot
-	# See utf-8(7) for more information.
+	if checkpath -W "$RC_LIBEXECDIR"; then
-	ebegin "Setting keyboard mode [${msg}]"
+		mkdir -p "$RC_LIBEXECDIR"/console
-	if yesno ${unicode}; then
+		dumpkeys >"$RC_LIBEXECDIR"/console/keymap
-		dumpkeys ${dumpkeys_charset:+-c} \
-			${dumpkeys_charset} | loadkeys --unicode
 	fi
-	n=1
-	while [ ${n} -le "${ttyn}" ]; do
-		kbd_mode "${kmode}" -C "${ttydev}${n}"
-		n=$((${n} + 1))
-	done
-	eend 0
 }

init.d/killprocs.in

@@ -0,0 +1,17 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Kill all processes so we can unmount disks cleanly."
+
+start()
+{
+	ebegin "Terminating remaining processes"
+	killall5 -15 ${killall5_opts}
+	sleep 1
+	eend 0
+	ebegin "Killing remaining processes"
+	killall5 -9 ${killall5_opts}
+	sleep 1
+	eend 0
+}

init.d/local.in

@@ -1,43 +1,51 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
-description="Executes user commands in /etc/conf.d/local"
+description="Executes user programs in @SYSCONFDIR@/local.d"
 
 depend()
 {
 	after *
-	keyword notimeout
+	keyword -timeout
 }
 
 start()
 {
-	ebegin "Starting local"
+	einfo "Starting local"
+
+	local file
+	for file in @SYSCONFDIR@/local.d/*.start ; do
+		[ -x "$file" ] && "$file"
+	done
 
 	if type local_start >/dev/null 2>&1; then
+		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
+		ewarn "Please move the code from the local_start function"
+		ewarn "to scripts with an .start extension"
+		ewarn "in @SYSCONFDIR@/local.d"
 		local_start
 	fi
 
-	# Support old configs
+	eend 0
-	if [ -e @SYSCONFDIR@/conf.d/local.start ]; then
-		. @SYSCONFDIR@/conf.d/local.start
-	fi
-
-	eend $? "Failed to start local"
 }
 
 stop()
 {
-	ebegin "Stopping local"
+	einfo "Stopping local"
+
+	local file
+	for file in @SYSCONFDIR@/local.d/*.stop; do
+		[ -x "$file" ] && "$file"
+	done
 
 	if type local_start >/dev/null 2>&1; then
+		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
+		ewarn "Please move the code from the local_stop function"
+		ewarn "to scripts with an .stop extension"
+		ewarn "in @SYSCONFDIR@/local.d"
 		local_stop
 	fi
 
-	# Support old configs
+	eend 0
-	if [ -e @SYSCONFDIR@/conf.d/local.stop ]; then
-		. @SYSCONFDIR@/conf.d/local.stop
-	fi
-
-	eend $? $"Failed to stop local"
 }

init.d/localmount.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mounts disks and swap according to /etc/fstab."
 
@@ -8,19 +8,23 @@ depend()
 {
 	need fsck
 	use lvm modules mtab
-	keyword nojail noopenvz noprefix novserver
+	after lvm modules
+	keyword -jail -openvz -vserver -lxc
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local types="noproc" x=
+	local types="noproc" x= no_netdev=
-	for x in ${net_fs_list}; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		types="${types},${x}"
 	done
 
+	if [ "$RC_UNAME" = Linux ]; then
+		no_netdev="-O no_netdev"
+	fi
 	ebegin "Mounting local filesystems"
-	mount -at "${types}"
+	mount -at "$types" $no_netdev
 	eend $? "Some local filesystem failed to mount"
 
 	# Always return 0 - some local mounts may not be critical for boot
@@ -30,40 +34,32 @@ start()
 stop()
 {
 	# We never unmount / or /dev or $RC_SVCDIR
-	local x= no_umounts="/|/dev|/dev/.*|${RC_SVCDIR}"
 
+	# Bug 381783
+	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+
+	local x= no_umounts_r="/|/dev|/dev/.*|${rc_svcdir}"
+	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib(32|64)?|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	OIFS=${IFS} SIFS=${IFS-y}
+	local IFS="$IFS:"
-	IFS=$IFS:
+	for x in $no_umounts $RC_NO_UMOUNTS; do
-	for x in ${no_umounts} ${RC_NO_UMOUNTS}; do
+		no_umounts_r="$no_umounts_r|$x"
-		no_umounts="${no_umounts}|${x}"
 	done
-	if [ "${SIFS}" = "y" ]; then
-		IFS=$OIFS
-	else
-		unset IFS
-	fi
 
-	if [ "${RC_UNAME}" = "Linux" ]; then
+	if [ "$RC_UNAME" = Linux ]; then
-		no_umounts="${no_umounts}|/proc|/proc/.*|/sys|/sys/.*"
+		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
 	fi
-	no_umounts="^(${no_umounts})$"
+	no_umounts_r="^($no_umounts_r)$"
 
 	# Flush all pending disk writes now
 	sync; sync
 
-	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
+	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
-	# occure, bug #13599.
-	# As $RC_SVCDIR may also be tmpfs we cd to it to lock it
-	cd "${RC_SVCDIR}"
-	umount -a -t tmpfs 2>/dev/null
 
-	. "${RC_LIBDIR}"/sh/rc-mount.sh
+	# Umount loop devices
-
+	einfo "Unmounting loop devices"
-	# Umount loopback devices
-	einfo "Unmounting loopback devices"
 	eindent
-	do_unmount "umount -d" --skip-point-regex "${no_umounts}" \
+	do_unmount "umount -d" --skip-point-regex "$no_umounts_r" \
 		--node-regex "^/dev/loop"
 	eoutdent
 
@@ -72,12 +68,12 @@ stop()
 	einfo "Unmounting filesystems"
 	eindent
 	local fs=
-	for x in ${net_fs_list}; do
+	for x in $net_fs_list $extra_net_fs_list; do
-		fs="${fs}${fs:+|}${x}"
+		fs="$fs${fs:+|}$x"
 	done
-	[ -n "${fs}" ] && fs="^(${fs})$"
+	[ -n "$fs" ] && fs="^($fs)$"
-	do_unmount "umount" --skip-point-regex "${no_umounts}" \
+	do_unmount umount --skip-point-regex "$no_umounts_r" \
-		${fs:+--skip-fstype-regex} ${fs} --nonetdev
+		"${fs:+--skip-fstype-regex}" $fs --nonetdev
 	eoutdent
 
 	return 0

init.d/mixer.in

@@ -1,13 +1,13 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="restore"
 
 depend()
 {
 	need localmount
-	keyword nojail noprefix
+	keyword -jail
 }
 
 restore()
@@ -17,11 +17,11 @@ restore()
 	eindent
 	for mixer in /dev/mixer*; do
 		if [ -r "/var/db/${mixer#/dev/}-state" ]; then
-			vebegin "${mixer}"
+			vebegin "$mixer"
-			mixer -f "${mixer}" \
+			mixer -f "$mixer" \
 			$(cat "/var/db/${mixer#/dev/}-state") >/dev/null
 			veend $?
-			: $((retval += $?))
+			: $(( retval += $? ))
 		fi
 	done
 }
@@ -37,11 +37,11 @@ stop()
 	ebegin "Saving mixer settings"
 	eindent
 	for mixer in /dev/mixer*; do
-		vebegin "${mixer}"
+		vebegin "$mixer"
-		mixer -f "${mixer}" -s >/var/db/"${mixer#/dev/}"-state
+		mixer -f "$mixer" -s >/var/db/"${mixer#/dev/}"-state
 		veend $?
-		: $((retval += $?))
+		: $(( retval += $? ))
 	done
 	eoutdent
-	eend ${retval}
+	eend $retval
 }

init.d/modules.in

@@ -1,13 +1,13 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Loads a user defined list of kernel modules."
 
 depend()
 {
 	use isapnp
-	keyword noopenvz noprefix novserver
+	keyword -openvz -vserver -lxc
 }
 
 start()
@@ -16,43 +16,48 @@ start()
 	# support compiled in ...
 	[ ! -f /proc/modules ] && return 0
 
-	local KV=$(uname -r)
+	local KV x y kv_variant_list
-	local KV_MAJOR=${KV%%.*}
+	KV=$(uname -r)
-	local x=${KV#*.}
+	# full $KV
-	local KV_MINOR=${x%%.*}
+	kv_variant_list="${KV}"
-	x=${KV#*.*.}
+	# remove any KV_EXTRA options to just get the full version
-	local KV_MICRO=${x%%-*}
+	x=${KV%%-*}
-
+	# now slowly strip them
-	local list= x= xx= y= args= cnt=0
+	while [ -n "$x" ] && [ "$x" != "$y" ]; do
-	for x in "${KV}" \
+		kv_variant_list="${kv_variant_list} $x"
-		${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} \
+		y=$x
-		${KV_MAJOR}.${KV_MINOR} \
+		x=${x%.*}
-	; do
-		eval list=\$modules_$(shell_var "${x}")
-		[ -n "${list}" ] && break
 	done
-	[ -z "${list}" ] && list=${modules}
 
-	for x in ${list}; do
+	local list= x= xx= y= args= mpargs= cnt=0 a=
-		ebegin "Loading module ${x}"
+	for x in $kv_variant_list ; do
-		xx=$(shell_var "${x}")
+		eval list=\$modules_$(shell_var "$x")
-		for y in "${KV}" \
+		[ -n "$list" ] && break
-			${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} \
+	done
-			${KV_MAJOR}.${KV_MINOR} \
+	[ -z "$list" ] && list=$modules
-		; do
+
-			eval args=\$module_${xx}_args_$(shell_var "${y}")
+	for x in $list; do
+		a=${x#*:}
+		if [ "$a" = "$x" ]; then
+			unset mpargs
+			ebegin "Loading module $x"
+		else
+			x=${x%%:*}
+			mpargs="-o $a"
+			ebegin "Loading module $x as $a"
+		fi
+		aa=$(shell_var "$a")
+		xx=$(shell_var "$x")
+		for y in $kv_variant_list ; do
+			eval args=\$module_${aa}_args_$(shell_var "$y")
+			[ -n "${args}" ] && break
+			eval args=\$module_${xx}_args_$(shell_var "$y")
 			[ -n "${args}" ] && break
 		done
-		[ -z "${args}" ] && eval args=\$module_${xx}_args
+		[ -z "$args" ] && eval args=\$module_${aa}_args
-		eval modprobe -q "${x}" "${args}"
+		[ -z "$args" ] && eval args=\$module_${xx}_args
-		eend $? "Failed to load ${x}" && cnt=$((${cnt} + 1))
+		eval modprobe -q "$mpargs" "$x" "$args"
+		eend $? "Failed to load $x" && : $(( cnt += 1 ))
 	done
-	einfo "Autoloaded ${cnt} module(s)"
+	einfo "Autoloaded $cnt module(s)"
-
-	# Just in case a sysadmin prefers generic symbolic links in
-	# /lib/modules/boot for boot time modules we will load these modules
-	[ -n "$(modprobe -l -t boot)" ] && modprobe -a -t boot \* 2>/dev/null
-	
-	# Above test clobbers the return
-	return 0
 }

init.d/mount-ro.in

@@ -0,0 +1,44 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Re-mount filesytems read-only for a clean reboot."
+
+depend()
+{
+	need killprocs savecache
+	keyword -openvz -vserver -lxc
+}
+
+start()
+{
+	# Flush all pending disk writes now
+	sync; sync
+
+	ebegin "Remounting remaining filesystems read-only"
+	# We need the do_unmount function
+	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
+	eindent
+
+	# Bug 381783
+	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+
+	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${rc_svcdir}" x= fs=
+	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
+	# RC_NO_UMOUNTS is an env var that can be set by plugins
+	local IFS="$IFS:"
+	for x in $no_umounts $RC_NO_UMOUNTS; do
+		m="$m|$x"
+	done
+	m="^($m)$"
+	fs=
+	for x in $net_fs_list $extra_net_fs_list; do
+		fs="$fs${fs:+|}$x"
+	done
+	[ -n "$fs" ] && fs="^($fs)$"
+	do_unmount "umount -r" \
+		--skip-point-regex "$m" \
+		"${fs:+--skip-fstype-regex}" $fs --nonetdev
+	eoutdent
+	eend $?
+}

init.d/moused.in

@@ -1,62 +1,62 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 mouse=${RC_SVCNAME##*.}
-if [ -n "${name}" -a "${mouse}" != "moused" ]; then
+if [ -n "$mouse" -a "$mouse" != "moused" ]; then
-	moused_device=/dev/"${mouse}"
+	moused_device=/dev/"$mouse"
-	pidfile=/var/run/moused-"${mouse}".pid
+	pidfile=/var/run/moused-"$mouse".pid
 else
 	pidfile=/var/run/moused.pid
 fi
 name="Console Mouse Daemon"
-[ -n "${moused_device}" ] && name="${name} (${moused_device})"
+[ -n "$moused_device" ] && name="$name ($moused_device)"
 
 depend()
 {
 	need localmount
 	after bootmisc
-	keyword nojail noprefix
+	keyword -jail
 }
 
 start()
 {
-	ebegin "Starting ${name}" 
+	ebegin "Starting $name"
 
-	if [ -z "${moused_device}" ]; then
+	if [ -z "$moused_device" ]; then
 		local dev=
 		for dev in /dev/psm[0-9]* /dev/ums[0-9]*; do
-			[ -c "${dev}" ] || continue
+			[ -c "$dev" ] || continue
-			[ -e /var/run/moused-"${dev##*/}".pid ] && continue 
+			[ -e /var/run/moused-"${dev##*/}".pid ] && continue
-			moused_device=${dev}
+			moused_device=$dev
 			eindent
-			einfo "Using mouse on ${moused_device}"
+			einfo "Using mouse on $moused_device"
 			eoutdent
 			break
 		done
 	fi
 
-	if [ -z "${moused_device}" ]; then
+	if [ -z "$moused_device" ]; then
-		eend 1 "No mouse device found" 
+		eend 1 "No mouse device found"
 		return 1
 	fi
 
 	local args=
 	eval args=\$moused_args_${moused_device##*/}
-	[ -z "${args}" ] && args=${moused_args}
+	[ -z "$args" ] && args=$moused_args
 
 	start-stop-daemon --start --exec /usr/sbin/moused \
-		--pidfile "${pidfile}" \
+		--pidfile "$pidfile" \
-		-- ${args} -p "${moused_device}" -I "${pidfile}"
+		-- $args -p "$moused_device" -I "$pidfile"
 	local retval=$?
-	
+
-	if [ ${retval} = 0 ]; then
+	if [ $retval = 0 ]; then
 		local ttyv=
 		for ttyv in /dev/ttyv*; do
-			vidcontrol < "${ttyv}" -m on
+			vidcontrol < "$ttyv" -m on
-			: $((retval+= $?))
+			: $(( retval += $? ))
 		done
 	fi
-	
+
-	eend ${retval} "Failed to start moused"
+	eend $retval "Failed to start moused"
 }

init.d/mtab.in

@@ -1,17 +1,22 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Update /etc/mtab to match what the kernel knows about"
 
 depend()
 {
 	need root
-	keyword noprefix
 }
 
 start()
 {
+	if [ -L /etc/mtab ]
+	then
+		einfo "Skipping mtab update (mtab is a symbolic link)"
+		return 0
+	fi
+
 	ebegin "Updating /etc/mtab"
 	if ! echo 2>/dev/null >/etc/mtab; then
 		ewend 1 "/etc/mtab is not updateable"

init.d/net.lo.in

@@ -1,8 +1,8 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
-MODULESDIR="${RC_LIBDIR}/net"
+MODULESDIR="${RC_LIBEXECDIR}/net"
 MODULESLIST="${RC_SVCDIR}/nettree"
 _config_vars="config routes"
 
@@ -20,12 +20,14 @@ depend()
 
 	need localmount
 	after bootmisc
-	provide net
+	keyword -jail -vserver
-	keyword nojail noprefix novserver
 
 	case "${IFACE}" in
-		lo|lo0);;
+		lo|lo0) provide lo;;
-		*) after net.lo net.lo0;;
+		*)
+			after net.lo net.lo0 dbus
+			provide net
+			;;
 	esac
 
 	if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then
@@ -37,17 +39,32 @@ depend()
 		eval prov=\$rc_${dep}_${IFVAR}
 		if [ -n "${prov}" ]; then
 			${dep} ${prov}
+			ewarn "rc_${dep}_${IFVAR} is deprecated."
+			ewarn "Please use rc_net_${IFVAR}_${dep} instead."
 		fi
 	done
 }
 
 # Support bash arrays - sigh
+_array_helper()
+{
+	local _a=
+
+	eval _a=\$$1
+	_a=$(echo "${_a}" | sed -e 's:^[[:space:]]*::' -e 's:[[:space:]]*$::' -e '/^$/d' -e 's:[[:space:]]\{1,\}: :g')
+
+	[ -n "${_a}" ] && printf "%s\n" "${_a}"
+}
+
 _get_array()
 {
 	local _a=
 	if [ -n "${BASH}" ]; then
 		case "$(declare -p "$1" 2>/dev/null)" in
 			"declare -a "*)
+				ewarn "You are using a bash array for $1."
+				ewarn "This feature will be removed in the future."
+				ewarn "Please see net.example for the correct format for $1."
 				eval "set -- \"\${$1[@]}\""
 				for _a; do
 					printf "%s\n" "${_a}"
@@ -57,10 +74,7 @@ _get_array()
 		esac
 	fi
 
-	eval _a=\$$1
+	_array_helper $1
-	printf "%s" "${_a}"
-	printf "\n"
-	[ -n "${_a}" ]
 }
 
 # Flatten bash arrays to simple strings
@@ -69,6 +83,9 @@ _flatten_array()
 	if [ -n "${BASH}" ]; then
 		case "$(declare -p "$1" 2>/dev/null)" in
 			"declare -a "*)
+				ewarn "You are using a bash array for $1."
+				ewarn "This feature will be removed in the future."
+				ewarn "Please see net.example for the correct format for $1."
 				eval "set -- \"\${$1[@]}\""
 				for x; do
 					printf "'%s' " "$(printf "$x" | sed "s:':'\\\'':g")"
@@ -78,10 +95,7 @@ _flatten_array()
 		esac
 	fi
 
-	eval _a=\$$1
+	_array_helper $1
-	printf "%s" "${_a}"
-	printf "\n"
-	[ -n "${_a}" ]
 }
 
 _wait_for_carrier()
@@ -105,7 +119,7 @@ _wait_for_carrier()
 			eend 0
 			return 0
 		fi
-		timeout=$((${timeout} - 1))
+		: $(( timeout -= 1 ))
 		[ "${efunc}" = "einfon" ] && printf "."
 	done
 
@@ -134,9 +148,9 @@ _netmask2cidr()
 	local i= len=
 	local IFS=.
 	for i in $1; do
-		while [ ${i} != "0" ]; do
+		while [ ${i} -ne 0 ]; do
-			len=$((${len} + ${i} % 2))
+			: $(( len += i % 2 ))
-			i=$((${i} >> 1))
+			: $(( i >>= 1 ))
 		done
 	done
 
@@ -159,6 +173,36 @@ _configure_variables()
 	done
 }
 
+_which()
+{
+	local i OIFS
+	# Empty
+	[ -z "$1" ] && return
+	# check paths
+	OIFS="$IFS"
+	IFS=:
+	for i in $PATH ; do
+		[ -x $i/$1 ] && echo $i/$1 && break
+	done
+	IFS=$OIFS
+}
+
+# Like _which, but also consider shell builtins, and multiple alternatives
+_program_available()
+{
+	[ -z "$1" ] && return 0
+	local x=
+	for x; do
+		case "${x}" in
+			/*) [ -x "${x}" ] && break;;
+			*) type "${x}" >/dev/null 2>&1 && break;;
+		esac
+		unset x
+	done
+	[ -n "${x}" ] && echo $x && return 0
+	return 1
+}
+
 _show_address()
 {
 	einfo "received address $(_get_inet_address "${IFACE}")"
@@ -180,7 +224,7 @@ _gen_module_list()
 		${update} || return 0
 	fi
 
-	einfo "Caching network module dependencies" 
+	einfo "Caching network module dependencies"
 	# Run in a subshell to protect the main script
 	(
 	after() {
@@ -215,7 +259,7 @@ _gen_module_list()
 
 	for MODULE in "${MODULESDIR}"/*.sh; do
 		sh -n "${MODULE}" || continue
-		. "${MODULE}" || continue 
+		. "${MODULE}" || continue
 		MODULE=${MODULE#${MODULESDIR}/}
 		MODULE=${MODULE%.sh}
 		eval ${MODULE}_depend
@@ -267,7 +311,7 @@ _gen_module_list()
 		echo "module_${i}_program_start='${PROGRAM_START}'" >> "${MODULESLIST}"
 		echo "module_${i}_program_stop='${PROGRAM_STOP}'" >> "${MODULESLIST}"
 		echo "module_${i}_provide='${PROVIDE}'" >> "${MODULESLIST}"
-		i=$((${i} + 1))
+		: $(( i += 1 ))
 	done
 	echo "module_${i}=" >> "${MODULESLIST}"
 	)
@@ -294,18 +338,17 @@ _load_modules()
 
 	local i=-1 x= mod= f= provides=
 	while true; do
-		i=$((${i} + 1))
+		: $(( i += 1 ))
 		eval mod=\$module_${i}
 		[ -z "${mod}" ] && break
 		[ -e "${MODULESDIR}/${mod}.sh" ] || continue
 
 		eval set -- \$module_${i}_program
 		if [ -n "$1" ]; then
-			x=
+			if ! _program_available "$@" >/dev/null; then
-			for x; do
+				vewarn "Skipping module $mod due to missing program: $@"
-				[ -x "${x}" ] && break
+				continue
-			done
+			fi
-			[ -x "${x}" ] || continue
 		fi
 		if ${starting}; then
 			eval set -- \$module_${i}_program_start
@@ -313,15 +356,10 @@ _load_modules()
 			eval set -- \$module_${i}_program_stop
 		fi
 		if [ -n "$1" ]; then
-			x=
+			if ! _program_available "$@" >/dev/null; then
-			for x; do
+				vewarn "Skipping module $mod due to missing program: $@"
-				case "${x}" in
+				continue
-					/*) [ -x "${x}" ] && break;;
+			fi
-					*) type "${x}" >/dev/null 2>&1 && break;;
-				esac
-				unset x
-			done
-			[ -n "${x}" ] || continue
 		fi
 
 		eval provides=\$module_${i}_provide
@@ -343,7 +381,7 @@ _load_modules()
 
 		# Wrap our provides
 		local f=
-		for f in pre_start start post_start; do 
+		for f in pre_start start post_start; do
 			eval "${provides}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
 		done
 
@@ -357,7 +395,7 @@ _load_modules()
 			*" ${mod} "*)
 			eval x=\$module_${mod}_provides
 			[ -z "${x}" ] && continue
-			for f in pre_start start post_start; do 
+			for f in pre_start start post_start; do
 				eval "${x}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
 			done
 			eval module_${x}_providedby="${mod}"
@@ -379,7 +417,7 @@ _load_modules()
 			MODULES="${MODULES}${MODULES:+ }${mod}"
 		done
 	else
-		for mod in ${LIST}; do 
+		for mod in ${LIST}; do
 			MODULES="${mod}${MODULES:+ }${MODULES}"
 		done
 	fi
@@ -395,18 +433,20 @@ _load_config()
 	config_index=0
 	local IFS="$__IFS"
 	set -- ${config}
-	
+
 	# We should support a space separated array for cidr configs
+	# But only as long as they do not contain other parameters for the address
 	if [ $# = 1 ]; then
 		unset IFS
 		set -- ${config}
 		# Of course, we may have a single address added old style.
-		case "$2" in
+		# If the NEXT argument is a v4 or v6 address, it's the next config.
-			netmask|broadcast|brd|brd+)
+		# Otherwise, it's arguments to the first config...
-				local IFS="$__IFS"
+		if [ "${2#*.*}" = "${2}" -a "${2#*:*}" = "${2}" ]; then
-				set -- ${config}
+			# Not an IPv4/IPv6
-				;;
+			local IFS="$__IFS"
-		esac
+			set -- ${config}
+		fi
 	fi
 
 	# Ensure that loopback has the correct address
@@ -415,7 +455,7 @@ _load_config()
 		   	config_0="127.0.0.1/8"
 			config_index=1
 		fi
-	else	
+	else
 		if [ -z "$1" ]; then
 			ewarn "No configuration specified; defaulting to DHCP"
 			config_0="dhcp"
@@ -428,7 +468,7 @@ _load_config()
 	# so modules can influence it
 	for cmd; do
 		eval config_${config_index}="'${cmd}'"
-		config_index=$((${config_index} + 1))
+		: $(( config_index += 1 ))
 	done
 	# Terminate the list
 	eval config_${config_index}=
@@ -436,7 +476,7 @@ _load_config()
 	config_index=0
 	for cmd in ${fallback}; do
 		eval fallback_${config_index}="'${cmd}'"
-		config_index=$((${config_index} + 1))
+		: $(( config_index += 1 ))
 	done
 	# Terminate the list
 	eval fallback_${config_index}=
@@ -445,11 +485,42 @@ _load_config()
 	config_index=-1
 }
 
+# Support functions
+_run_if()
+{
+	local cmd=$1 iface=$2 ifr=${IFACE} ifv=${IFVAR}
+	# Ensure that we don't stamp on real values
+	local IFACE= IFVAR=
+	shift
+	if [ -n "${iface}" ]; then
+		IFACE="${iface}"
+		[ "${iface}" != "${ifr}" ] && IFVAR=$(shell_var "${IFACE}")
+	else
+		IFACE=${ifr}
+		IFVAR=${ifv}
+	fi
+	${cmd}
+}
+interface_exists()
+{
+	_run_if _exists "$@"
+}
+interface_up()
+{
+	_run_if _up "$@"
+}
+interface_down()
+{
+	_run_if _down "$@"
+}
+
 start()
 {
-	local IFACE=${RC_SVCNAME#*.} oneworked=false module=
+	local IFACE=${RC_SVCNAME#*.} oneworked=false fallback=false module=
 	local IFVAR=$(shell_var "${IFACE}") cmd= our_metric=
-	local metric=0
+	local metric=0 _up_before_preup
+	eval _up_before_preup="\$up_before_preup_${IFVAR}"
+	[ -z "${_up_before_preup}" ] && _up_before_preup=$up_before_preup
 
 	einfo "Bringing up interface ${IFACE}"
 	eindent
@@ -463,7 +534,7 @@ start()
 	# available in preup and afterwards incase the user inadvertently
 	# brings it down
 	if [ "$(command -v preup)" = "preup" ]; then
-		_up 2>/dev/null
+		yesno "${_up_before_preup:-yes}" && _up 2>/dev/null
 		ebegin "Running preup"
 		eindent
 		preup || return 1
@@ -471,7 +542,7 @@ start()
 	fi
 
 	_up 2>/dev/null
-	
+
 	for module in ${MODULES}; do
 		if [ "$(command -v "${module}_pre_start")" = "${module}_pre_start" ]; then
 			${module}_pre_start || exit $?
@@ -498,19 +569,21 @@ start()
 	_load_config
 	config_index=0
 
-	eval our_metric=\$metric_${IFVAR} 
+	eval our_metric=\$metric_${IFVAR}
 	if [ -n "${our_metric}" ]; then
 		metric=${our_metric}
 	elif [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		metric=$((${metric} + $(_ifindex)))
+		: $(( metric += $(_ifindex) ))
 	fi
 
 	while true; do
 		eval config=\$config_${config_index}
-		[ -z "${config}" ] && break 
+		[ -z "${config}" ] && break
 
 		set -- ${config}
-		ebegin "$1"
+		if [ "$1" != "null" -a "$1" != "noop" ]; then
+			ebegin "$1"
+		fi
 		eindent
 		case "$1" in
 			noop)
@@ -534,16 +607,17 @@ start()
 		else
 			eval config=\$fallback_${config_index}
 			if [ -n "${config}" ]; then
+				fallback=true
 				eoutdent
 				ewarn "Trying fallback configuration ${config}"
 				eindent
 				eval config_${config_index}=\$config
 				unset fallback_${config_index}
-				config_index=$((${config_index} - 1))
+				: $(( config_index -= 1 ))
 			fi
 		fi
 		eoutdent
-		config_index=$((${config_index} + 1))
+		: $(( config_index += 1 ))
 	done
 
 	if ! ${oneworked}; then
@@ -556,8 +630,13 @@ start()
 		return 1
 	fi
 
-	local hidefirstroute=false first=true
+	local hidefirstroute=false first=true routes=
-	local routes="$(_get_array "routes_${IFVAR}")"
+	if ${fallback}; then
+		routes="$(_get_array "fallback_routes_${IFVAR}")"
+	fi
+	if [ -z "${routes}" ]; then
+		routes="$(_get_array "routes_${IFVAR}")"
+	fi
 	if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then
 		if [ "${config_0}" != "null" ]; then
 			routes="127.0.0.0/8 via 127.0.0.1
@@ -566,7 +645,7 @@ ${routes}"
 		fi
 	fi
 
-	local OIFS="${IFS}" SIFS=${IFS-y}
+	local OIFS="${IFS}" SIFS="${IFS-y}"
 	local IFS="$__IFS"
 	for cmd in ${routes}; do
 		unset IFS
@@ -581,7 +660,8 @@ ${routes}"
 			-net" "*|-host" "*);;
 			*" "netmask" "*)                   cmd="-net ${cmd}";;
 			*.*.*.*/32*)                       cmd="-host ${cmd}";;
-			*.*.*.*/*|0.0.0.0" "*|default" "*) cmd="-net ${cmd}";;
+			*.*.*.*/*|0.0.0.0|0.0.0.0" "*)     cmd="-net ${cmd}";;
+			default|default" "*)               cmd="-net ${cmd}";;
 			*)                                 cmd="-host ${cmd}";;
 		esac
 		if ${hidefirstroute}; then
@@ -608,7 +688,7 @@ ${routes}"
 	if [ "$(command -v postup)" = "postup" ]; then
 		ebegin "Running postup"
 		eindent
-		postup 
+		postup
 		eoutdent
 	fi
 
@@ -652,9 +732,13 @@ stop()
 		fi
 	done
 
-	# Only delete addresses for non PPP interfaces
+	# Only delete addresses for interfaces that exist
-	if ! [ "$(command -v is_ppp)" = "is_ppp" ] || ! is_ppp; then
+	if _exists; then
-		_delete_addresses "${IFACE}"
+		# PPP can manage it's own addresses when IN_BACKGROUND
+		# Important in case "demand" set on the ppp link
+		if ! (yesno ${IN_BACKGROUND} && is_ppp) ; then
+			_delete_addresses "${IFACE}"
+		fi
 	fi
 
 	for module in ${MODULES}; do
@@ -663,9 +747,14 @@ stop()
 		fi
 	done
 
-	! yesno ${IN_BACKGROUND} && \
+	# If not in background, and not loopback then bring the interface down
-	[ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ] && \
+	# unless overridden.
-	_down 2>/dev/null
+	if ! yesno ${IN_BACKGROUND} && \
+	[ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
+		eval module=\$ifdown_${IFVAR}
+		module=${module:-${ifdown:-YES}}
+		yesno ${module} && _down 2>/dev/null
+	fi
 
 	type resolvconf >/dev/null 2>&1 && resolvconf -d "${IFACE}" 2>/dev/null
 

init.d/netmount.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mounts network shares according to /etc/fstab."
 
@@ -11,7 +11,7 @@ need_portmap()
 "
 	set -- $(fstabinfo --options --fstype nfs,nfs4)
 	for opts; do
-		case ,${opts}, in
+		case ,$opts, in
 			*,noauto,*|*,nolock,*);;
 			*) return 0;;
 		esac
@@ -27,24 +27,25 @@ depend()
 	if need_portmap; then
 		pmap="rpc.statd"
 		[ -x @SYSCONFDIR@/init.d/rpcbind ] \
-			&& pmap="${pmap} rpcbind" \
+			&& pmap="$pmap rpcbind" \
-			|| pmap="${pmap} portmap"
+			|| pmap="$pmap portmap"
 	fi
 
 	config /etc/fstab
-	need net ${pmap}
+	need net $pmap
-	use afc-client amd autofs dns nfs nfsmount portmap rpcbind rpc.statd
+	use afc-client amd autofs openvpn
-	keyword nojail noopenvz noprefix novserver
+	use dns nfs nfsmount portmap rpcbind rpc.statd rpc.lockd
+	keyword -jail -vserver
 }
 
 start()
-{	
+{
 	local myneed= myuse= pmap="portmap" nfsmounts=
 	[ -x @SYSCONFDIR@/init.d/rpcbind ] && pmap="rpcbind"
 
-	local x= fs=
+	local x= fs= rc=
-	for x in ${net_fs_list}; do
+	for x in $net_fs_list $extra_net_fs_list; do
-		case "${x}" in
+		case "$x" in
 			nfs|nfs4)
 			# If the nfsmount script took care of the nfs
 			# filesystems, then there's no point in trying
@@ -54,17 +55,22 @@ start()
 			# Only try to mount NFS filesystems if portmap was
 			# started. This is to fix "hang" problems for new
 			# users who do not add portmap to the default runlevel.
-			if need_portmap && ! service_started "${pmap}"; then
+			if need_portmap && ! service_started "$pmap"; then
 				continue
 			fi
 			;;
 		esac
-		fs="${fs}${fs:+,}${x}"
+		fs="$fs${fs:+,}$x"
 	done
 
 	ebegin "Mounting network filesystems"
-	mount -at ${fs}
+	mount -at $fs
-	ewend $? "Could not mount all network filesystems"
+	rc=$?
+	if [ "$RC_UNAME" = Linux ]; then
+		mount -a -O _netdev
+		rc=$?
+	fi
+	ewend $rc "Could not mount all network filesystems"
 	return 0
 }
 
@@ -73,24 +79,28 @@ stop()
 	local x= fs=
 
 	ebegin "Unmounting network filesystems"
-	. "${RC_LIBDIR}/sh/rc-mount.sh"
+	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
-	for x in ${net_fs_list}; do
+	for x in $net_fs_list $extra_net_fs_list; do
-		fs="${fs}${fs:+,}${x}"
+		fs="$fs${fs:+,}$x"
 	done
-	if [ -n "${fs}" ]; then
+	if [ -n "$fs" ]; then
-		umount -at ${fs} || eerror "Failed to simply unmount filesystems"
+		umount -at $fs || eerror "Failed to simply unmount filesystems"
 	fi
 
 	eindent
 	fs=
-	for x in ${net_fs_list}; do
+	for x in $net_fs_list $extra_net_fs_list; do
-		fs="${fs}${fs:+|}${x}"
+		fs="$fs${fs:+|}$x"
 	done
-	[ -n "${fs}" ] && fs="^(${fs})$"
+	[ -n "$fs" ] && fs="^($fs)$"
-	do_unmount "umount" ${fs:+--fstype-regex} ${fs} --netdev
+	do_unmount umount ${fs:+--fstype-regex} $fs --netdev
 	retval=$?
 
 	eoutdent
-	eend ${retval} "Failed to unmount network filesystems"
+	if [ "$RC_UNAME" = Linux ]; then
+		umount -a -O _netdev
+		retval=$?
+	fi
+	eend $retval "Failed to unmount network filesystems"
 }

init.d/network.in

@@ -0,0 +1,358 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+# This script was inspired by the equivalent rc.d network from NetBSD.
+
+description="Configures network interfaces."
+__nl="
+"
+
+depend()
+{
+	need localmount
+	after bootmisc
+	provide net
+	keyword -jail -vserver
+}
+
+uniqify()
+{
+	local result= i=
+	for i; do
+		case " $result " in
+		*" $i "*);;
+		*) result="$result $i";;
+		esac
+	done
+	echo "${result# *}"
+}
+
+reverse()
+{
+	local result= i=
+	for i; do
+		result="$i $result"
+	done
+	echo "${result# *}"
+}
+
+sys_interfaces()
+{
+	case "$RC_UNAME" in
+	Linux)
+		local w= rest= i= cmd=$1
+		while read w rest; do
+			i=${w%%:*}
+			[ "$i" != "$w" ] || continue
+			if [ "$cmd" = u ]; then
+				ifconfig "$i" | grep -q "[ ]*UP" || continue
+			fi
+			printf "%s " "$i"
+		done </proc/net/dev
+		;;
+	*)
+		ifconfig -l$1
+		;;
+	esac
+}
+
+tentative()
+{
+	local inet= address= rest=
+
+	case "$RC_UNAME" in
+	Linux)
+		[ -x /sbin/ip ] || [ -x /bin/ip ] || return 1
+		[ -n "$(ip -f inet6 addr show tentative)" ]
+		;;
+	*)
+		local inet= address= rest=
+		LC_ALL=C ifconfig -a | while read inet address rest; do
+	 		case "${inet}" in
+			inet6)
+				case "${rest}" in
+				*" "tentative*) return 2;;
+				esac
+				;;
+			esac
+		done
+		[ $? = 2 ]
+		;;
+	esac
+}
+
+
+auto_interfaces()
+{
+	local ifs= c= f=
+
+	case "$RC_UNAME" in
+	NetBSD)
+		for c in $(ifconfig -C 2>/dev/null); do
+			for f in /etc/ifconfig.${c}[0-9]*; do
+				[ -f "$f" ] && printf "%s" "$f{##*.} "
+			done
+		done
+		;;
+	*)
+		for f in /etc/ifconfig.*; do
+			[ -f "$f" ] && printf "%s" "${f##*.} "
+		done
+		for f in /etc/ip.*; do
+			[ -f "$f" ] && printf "%s" "${f##*.} "
+		done
+		;;
+	esac
+	echo
+}
+
+interfaces()
+{
+	uniqify $(sys_interfaces "$@") $interfaces $(auto_interfaces)
+}
+
+dumpargs()
+{
+	local f="$1"
+
+	shift
+	case "$@" in
+	'')		[ -f "$f" ] && cat "$f";;
+	*"$__nl"*)	echo "$@";;
+	*)
+		(
+		 	set -o noglob
+			IFS=';'; set -- $@
+			IFS="$__nl"; echo "$*"
+		);;
+	esac
+}
+
+intup=false
+runip()
+{
+	local int="$1" err=
+	shift
+
+	# Ensure we have a valid broadcast address
+	case "$@" in
+	*" broadcast "*|*" brd "*) ;;
+	*:*) ;; # Ignore IPv6
+	*) set -- "$@" brd +;;
+	esac
+
+	err=$(LC_ALL=C ip address add "$@" dev "$int" 2>&1)
+	if [ -z "$err" ]; then
+		# ip does not bring up the interface when adding addresses
+		if ! $intup; then
+			ip link set "$int" up
+			intup=true
+		fi
+		return 0
+	fi
+	if [ "$err" = "RTNETLINK answers: File exists" ]; then
+		ip address del "$@" dev "$int" 2>/dev/null
+	fi
+	# Localise the error
+	ip address add "$@" dev "$int"
+}
+
+routeflush()
+{
+	if [ "$RC_UNAME" = Linux ]; then
+		if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
+			ip route flush scope global
+			ip route delete default 2>/dev/null
+		else
+			# Sadly we also delete some link routes, but
+			# this cannot be helped
+			local dest= gate= net= flags= rest=
+			route -n | while read dest gate net flags rest; do
+				[ -z "$net" ] && continue
+				case "$dest" in
+				[0-9]*)	;;
+				*)	continue;;
+				esac
+				local xtra= netmask="netmask $net"
+				case "$flags" in
+				U)	continue;;
+				*H*)	flags=-host; netmask=;;
+				*!*)	flags=-net; xtra=reject;;
+				*)	flags=-net;;
+				esac
+				route del $flags $dest $netmask $xtra
+			done
+			# Erase any default dev eth0 routes
+			route del default 2>/dev/null
+		fi
+	else
+		route -qn flush
+	fi
+}
+
+runargs()
+{
+	dumpargs "$@" | while read -r args; do
+		case "$args" in
+		''|"#"*)	;;
+		*)
+				(
+				 	eval vebegin "${args#*!}"
+					eval "${args#*!}"
+					veend $?
+				);;
+		esac
+	done
+}
+
+start()
+{
+	local cr=0 r= int= intv= cmd= args= upcmd=
+
+	if [ -z "$domainname" -a -s /etc/defaultdomain ]; then
+		domainname=$(cat /etc/defaultdomain)
+	fi
+	if [ -n "$domainname" ]; then
+		ebegin "Setting NIS domainname: $domainname"
+		domainname "$domainname"
+		eend $?
+	fi
+
+	ewarn
+	ewarn "The $RC_SVCNAME script is deprecated and will be"
+	ewarn "removed in the future."
+	ewarn "Please use the net.* scripts to manage your network interfaces."
+	ewarn
+
+	einfo "Starting network"
+	routeflush
+	if [ "$RC_UNAME" = "Linux" ]; then
+		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1
+		route add -net 127.0.0.0 netmask 255.0.0.0 \
+			gw 127.0.0.1 reject 2>/dev/null
+	else
+		ifconfig lo0 127.0.0.1 netmask 255.0.0.0 || cr=1
+		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 \
+			127.0.0.1 -reject || cr=1
+	fi
+	eindent
+	for int in $(interfaces); do
+		local func= cf=
+		intv=$(shell_var "$int")
+		eval upcmd=\$ifup_$intv
+		for func in ip ifconfig; do
+			eval cmd=\$${func}_$intv
+			if [ -n "$cmd" -o -f /etc/"$func.$int" ]; then
+				cf=/etc/"$func.$int"
+				break
+			fi
+		done
+		[ -n "$cf" -o -n "$upcmd" -o \
+			-f /etc/ifup."$int" -o -f "$cf" ] || continue
+		veinfo "$int"
+		case "$func" in
+		ip)	func=runip; intup=false;;
+		esac
+		eindent
+		runargs /etc/ifup."$int" "$upcmd"
+		r=0
+		dumpargs "$cf" "$cmd" | while read -r args; do
+			case "$args" in
+			''|"#"*)	;;
+			"!"*)
+					(
+					 	eval vebegin "${args#*!}"
+						eval "${args#*!}"
+						veend $?
+					);;
+			*)
+					(
+					 	set -o noglob
+						eval set -- "$args"
+						vebegin "$@"
+						$func "$int" "$@"
+						veend $?
+					);;
+			esac
+		done
+		eoutdent
+	done
+	eoutdent
+	eend $cr
+
+	# Wait for any inet6 tentative addresses
+	r=5
+	while [ $r -gt 0 ]; do
+		tentative || break
+		[ $r = 5 ] && vebegin "Waiting for tentative addresses"
+		sleep 1
+		: $(( r -= 1 ))
+	done
+	if [ $r != 5 ]; then
+		[ $r != 0 ]
+		veend $?
+	fi
+
+	if [ -n "$defaultroute" ]; then
+		ebegin "Setting default route $defaultroute"
+		route add default $defaultroute
+		eend $?
+	elif [ -n "$defaultiproute" ]; then
+		ebegin "Setting default route $defaultiproute"
+		ip route add default $defaultiproute
+		eend $?
+	fi
+
+	if [ -n "$defaultroute6" ]; then
+		ebegin "Setting default route $defaultroute6"
+		if [ "$RC_UNAME" = Linux ]; then
+			routecmd="route -A inet6 add"
+		else
+			routecmd="route -inet6 add"
+		fi
+		$routecmd default $defaultroute6
+		eend $?
+	elif [ -n "$defaultiproute6" ]; then
+		ebegin "Setting default route $defaultiproute6"
+		ip -f inet6 route add default $defaultiproute6
+		eend $?
+	fi
+
+	return 0
+}
+
+stop()
+{
+	# Don't stop the network at shutdown.
+ 	# We don't use the noshutdown keyword so that we are started again
+	# correctly if we go back to multiuser.
+	yesno ${shutdown_network:-YES} && yesno $RC_GOINGDOWN && return 0
+
+	local int= intv= cmd= downcmd= r=
+	einfo "Stopping network"
+	routeflush
+	eindent
+	for int in $(reverse $(interfaces u)); do
+		intv=$(shell_var "$int")
+		eval downcmd=\$ifdown_$intv
+		eval cmd=\$ip_$intv
+		[ -z "$cmd" ] && eval cmd=\$ifconfig_$intv
+		if [ -n "$cmd" -o -f /etc/ip."$int" -o \
+			-f /etc/ifconfig."$int" -o \
+			-n "$downcmd" -o -f /etc/ifdown."$int" ];
+		then
+			veinfo "$int"
+			runargs /etc/ifdown."$int" "$downcmd"
+			if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
+				# We need to do this, otherwise we may
+				# fail to add things correctly on restart
+				ip address flush dev "$int" 2>/dev/null
+			fi
+			ifconfig "$int" down 2>/dev/null
+			ifconfig "$int" destroy 2>/dev/null
+		fi
+	done
+	eoutdent
+	eend 0
+}

init.d/newsyslog.in

@@ -1,18 +1,17 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 required_files="/etc/newsyslog.conf"
 
 depend()
 {
 	need localmount
-	keyword noprefix
 }
 
 start()
 {
 	ebegin "Creating and/or trimming log files"
-	newsyslog -s ${newsyslog_args}
+	newsyslog -s $newsyslog_args
 	eend $?
 }

init.d/nscd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/nscd
-command_args="${nscd_args}"
+command_args=$nscd_args
 pidfile=/var/run/nscd.pid
 name="Name Service Cache Daemon"
 
@@ -16,7 +16,7 @@ depend() {
 }
 
 flush() {
-	ebegin "Flushing ${name}"
+	ebegin "Flushing $name"
 	nscd -I all >/dev/null
 	eend $?
 }

init.d/numlock.in

@@ -1,15 +1,15 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Turns numlock on for the consoles."
 
-ttyn=${rc_tty_number:-${RC_TTY_NUMBER}:-12}
+ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
 	need localmount
-	keyword noopenvz noprefix novserver
+	keyword -openvz -vserver -lxc
 }
 
 _setleds()
@@ -19,12 +19,12 @@ _setleds()
 	local dev=/dev/tty t= i=1 retval=0
 	[ -d /dev/vc ] && dev=/dev/vc/
 
-	while [ ${i} -le ${ttyn} ]; do
+	while [ $i -le $ttyn ]; do
-		setleds -D "$1"num < ${dev}${i} || retval=1
+		setleds -D "$1"num < $dev$i || retval=1
-		i=$((${i} + 1))
+		: $(( i += 1 ))
 	done
 
-	return ${retval}
+	return $retval
 }
 
 start()