openrc-0.6.5

This fixes bug #342825.

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.6.1
+VERSION=	0.6.5
 PKG=		${NAME}-${VERSION}

README

@@ -1,8 +1,9 @@
 OpenRC README
-
+=============
 
 Installation
 ------------
+
 make install
 Yup, that simple. Works with GNU make and BSD make.
 
@@ -51,34 +52,56 @@ init.d.misc is not installed by default as the scripts will need
 tweaking on a per distro basis. They are also non essential to the operation
 of the system.
 
-
 Reporting Bugs
 -------------
+
 If you installed OpenRC from your chosen distribution, you should report
 bugs directly to them. For example, if you use Gentoo and emerged OpenRC
 then you should reports bugs to http://bugs.gentoo.org.
 
-Otherwise, you can report them directly to me at
+History - by Daniel Robbins
-http://roy.marples.name/projects/openrc
+---------------------------
 
+The Gentoo modular network scripts were created by Daniel Robbins for
+Gentoo Linux 1.0_rc6, in development during most of 2001 and released
+in September 2001. After their development, the dependency-based initscript
+system was maintained by a number of senior developers (add names here....
+need to look at baselayout cvs logs.)
 
-History - by Roy Marples
+excerpt from http://www.gentoo.org/news/en/gwn/20040426-newsletter.xml
-------------------------
+by Grant Goodyear:
-I became a Gentoo/Linux developer in 2004 and wrote the modular network
-scripts for the Gentoo baselayout package. baselayout is a collection of
-bash scripts to bring up your computer and its services.
-Then towards the end of 2005 I found myself as the primary maintainer
-for baselayout.
 
-At the start of 2007, baselayout-2 is announced to the world, re-writing the
+"My recollection is that one of woodchip's more impressive early feats was the
-core of baselayout in C and allowing POSIX sh init scripts instead of
+complete replacement of all of the init scripts in Portage for Gentoo Linux
-forcing the use of bash. By Mid 2007 I have re-written everything, including
+1.0_rc6. Through 1.0_rc5 Gentoo had used fairly standard rc scripts modified
-init scripts, and alpha and pre baselayout-2 snapshots where put into Gentoo.
+from Stampede Linux, but for 1.0_rc6 Daniel Robbins (drobbins) and Martin
-Towards the end of 2007 I retired as a Gentoo developer for reasons I won't
+Schlemmer (azarah) had created a new dependency-based init script system that
-go into here. baselayout-2 was still in the pre stage, and aside from the
+is still used today. Within a span of days Donny rewrote every single init
-fbsd users, it was masked everywhere. However, I also desired to keep the
+script in the Portage tree and committed new masked packages to await the
-baselayout-2 project alive, but outside of Gentoo and into other projects
+release of 1.0_rc6. Thanks to woodchip (and drobbins and azarah, of course) the
-such as FreeBSD.
+transition to the new init scripts was nearly painless."
+
+Roy Marples became a Gentoo/Linux developer in 2004 and maintained the modular
+network scripts for the Gentoo baselayout package.  Then towards the end of
+2005, he became the the primary maintainer for baselayout.
+
+At the start of 2007, Roy Marples announced the ongoing development of
+baselayout-2, containing a rewritten initscript code in C and allowing POSIX sh
+init scripts instead of forcing the use of bash. By Mid 2007 Roy Marples had
+re-implemented the Gentoo initscript design created by Daniel Robbins, using an
+entirely new code base.  Alpha and pre-release baselayout-2 snapshots were
+added to Gentoo's Portage tree as an optional component.
+
+Towards the end of 2007, Roy Marples retired as a Gentoo developer Baselayout-2
+was still in the pre stage, and aside from the fbsd users, it was masked
+everywhere. However, Roy Marples desired to keep the baselayout-2 project
+alive, but outside of Gentoo and into other projects such as FreeBSD.
+
+As such, the Gentoo Council permitted Roy Marples to release OpenRC under the 2
+clause BSD license, managed by him as an external project. Around mid-2010, Roy
+Marples decided to no longer maintain OpenRC. At this point, he transferred
+development back to Gentoo, which continues to maintain the scripts. In
+addition, Daniel Robbins continues to maintain an independent version OpenRC
+for Funtoo Linux, which includes a Funtoo-specific network configuration
+system.
 
-As such, the Gentoo Council have allowed the creation of OpenRC under the
-2 clause BSD license, managed by me as an external project.

doc/net.example.Linux.in

@@ -896,7 +896,7 @@
 # and you're done :)
 
 # By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services now that network is up
+# If you would like it to wait so that other services know that network is up
 # then you can specify a timeout here.
 #plug_timeout="10"
 # A value of 0 means wait forever.
@@ -936,8 +936,8 @@
 
 #preup() {
 #	# Test for link on the interface prior to bringing it up.  This
-#	# only works on some network adapters and requires the mii-diag
+#	# only works on some network adapters and requires the
-#	# package to be installed.
+#	# sys-apps/net-tools package to be installed.
 #	if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
 #		ewarn "No link on ${IFACE}, aborting configuration"
 #		return 1

etc/rc.conf.in

@@ -11,7 +11,8 @@
 
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
-# this feature.
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
 #rc_interactive="YES"
 
 # If we need to drop to a shell, you can specify it here.
@@ -75,8 +76,14 @@
 # Set unicode to YES to turn on unicode support for keyboards and screens.
 #unicode="NO"
 
-# Network fstypes. Below is the default.
+# Below is the default list of network fstypes.
-net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs nfs nfs4 ocfs2 shfs smbfs"
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
 
 ##############################################################################
 # SERVICE CONFIGURATION VARIABLES

init.d/bootmisc.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	need localmount
 	before logger
 	after clock sysctl
@@ -36,6 +35,12 @@ cleanup_tmp_dir()
 		# Faster than find
 		rm -rf -- [^ajlq\.]*
 
+		# pam_mktemp creates a .private directory within which
+		# each user gets a private directory with immutable
+		# bit set; remove the immutable bit before trying to
+		# remove it.
+		[ -d /tmp/.private ] && chattr -R -a /tmp/.private
+
 		find $startopts ! -name . \
 			! -path "./lost+found" \
 			! -path "./lost+found/*" \
@@ -49,8 +54,6 @@ cleanup_tmp_dir()
 			! -path "./aquota.group/*" \
 			! -path "./journal" \
 			! -path "./journal/*" \
-			! -path "./.private" \
-			! -path "./.private/*" \
 			-exec rm -rf {} \;
 		eend 0
 	else

init.d/consolefont.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()

init.d/keymaps.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()

init.d/local.in

@@ -18,11 +18,6 @@ start()
 		local_start
 	fi
 
-	# Support old configs
-	if [ -e @SYSCONFDIR@/conf.d/local.start ]; then
-		. @SYSCONFDIR@/conf.d/local.start
-	fi
-
 	eend $? "Failed to start local"
 }
 
@@ -34,10 +29,5 @@ stop()
 		local_stop
 	fi
 
-	# Support old configs
-	if [ -e @SYSCONFDIR@/conf.d/local.stop ]; then
-		. @SYSCONFDIR@/conf.d/local.stop
-	fi
-
 	eend $? "Failed to stop local"
 }

init.d/localmount.in

@@ -20,7 +20,7 @@ start()
 	done
 
 	ebegin "Mounting local filesystems"
-	mount -at "$types"
+	mount -at "$types" -O no_netdev
 	eend $? "Some local filesystem failed to mount"
 
 	# Always return 0 - some local mounts may not be critical for boot

init.d/network.in

@@ -63,17 +63,9 @@ tentative()
 
 	case "$RC_UNAME" in
 	Linux)
-		[ -x /sbin/ip ] || return 1
+		[ -x /sbin/ip ] || [ -x /bin/ip ] || return 1
-		LC_ALL=C ip addr show | while read inet address rest; do
+		[ -n "$(ip -f inet6 addr show tentative)" ]
-	 		case "${inet}" in
-			inet6)
-				case "${rest}" in
-				*" "tentative*) return 2;;
-				esac
 		;;
-			esac
-		done
-		[ $? = 2 ]
 	*)
 		local inet= address= rest=
 		LC_ALL=C ifconfig -a | while read inet address rest; do
@@ -169,7 +161,7 @@ runip()
 routeflush()
 {
 	if [ "$RC_UNAME" = Linux ]; then
-		if [ -x /sbin/ip ]; then
+		if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
 			ip route flush scope global
 			ip route delete default 2>/dev/null
 		else
@@ -231,8 +223,6 @@ start()
 	routeflush
 	if [ "$RC_UNAME" = "Linux" ]; then
 		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1 
-		route add -net 127.0.0.0 netmask 255.0.0.0 \
-			gw 127.0.0.1 2>/dev/null
 		route add -net 127.0.0.0 netmask 255.0.0.0 \
 			gw 127.0.0.1 reject 2>/dev/null
 	else
@@ -289,9 +279,14 @@ start()
 	r=5
 	while [ $r -gt 0 ]; do
 		tentative || break
+		[ $r = 5 ] && vebegin "Waiting for tentative addresses"
 		sleep 1
 		r=$(($r - 1))
 	done
+	if [ $r != 5 ]; then
+		[ $r != 0 ]
+		veend $?
+	fi
 	
 	if [ -n "$defaultroute" ]; then
 		ebegin "Setting default route $defaultroute"
@@ -343,7 +338,7 @@ stop()
 		then
 			veinfo "$int"
 			runargs /etc/ifdown."$int" "$downcmd"
-			if [ -x /sbin/ip ]; then
+			if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
 				# We need to do this, otherwise we may
 				# fail to add things correctly on restart
 				ip address flush dev "$int" 2>/dev/null

init.d/sysctl.BSD.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	before bootmisc logger
 	keyword -prefix
 }

init.d/sysctl.Linux.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	before bootmisc logger
 	keyword -openvz -prefix -vserver
 }

net/bonding.sh

@@ -15,7 +15,14 @@ _is_bond()
 
 bonding_pre_start()
 {
-	local x= s= slaves="$(_get_array "slaves_${IFVAR}")" 
+	local x= s= n= slaves= primary=
+
+	slaves="$(_get_array "slaves_${IFVAR}")"
+	unset slaves_${IFVAR}
+
+	eval primary="\$primary_${IFVAR}"
+	unset primary_${IFVAR}
+
 
 	[ -z "${slaves}" ] && return 0
 
@@ -43,9 +50,12 @@ bonding_pre_start()
 	# Nice and dynamic :)
 	for x in /sys/class/net/"${IFACE}"/bonding/*; do
 		[ -f "${x}" ] || continue
-		eval s=\$${x##*/}_${IFVAR}
+		n=${x##*/}
+		eval s=\$${n}_${IFVAR}
 		if [ -n "${s}" ]; then
-			echo "${s}" >"${x}"
+			einfo "Setting ${n}: ${s}"
+			echo "${s}" >"${x}" || \
+			eerror "Failed to configure $n (${n}_${IFVAR})"
 		fi
 	done
 
@@ -72,6 +82,11 @@ bonding_pre_start()
 	# finally add in slaves
 	eoutdent
 	if [ -d /sys/class/net ]; then
+		if [ -n "${primary}" ]; then
+			echo "+${primary}" >/sys/class/net/"${IFACE}"/bonding/slaves
+			echo "${primary}" >/sys/class/net/"${IFACE}"/bonding/primary
+			slaves="${slaves/${primary}/}"
+		fi
 		for s in ${slaves}; do
 			echo "+${s}" >/sys/class/net/"${IFACE}"/bonding/slaves
 		done
@@ -117,6 +132,12 @@ bonding_stop()
 	done
 	)
 
+	_down
+
+	if [ -d /sys/class/net ]; then
+		echo "-${IFACE}" > /sys/class/net/bonding_masters
+	fi
+
 	eend 0
 	return 0
 }

net/dhclient.sh

@@ -17,6 +17,7 @@ dhclient_start()
 
 	# Get our options
 	# These options only work in Gentoo, and maybe RedHat
+	eval args=\$dhclient_${IFVAR}
 	eval opts=\$dhcp_${IFVAR}
 	[ -z "${opts}" ] && opts=${dhcp}
 

net/iproute2.sh

@@ -1,9 +1,18 @@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
+_ip()
+{
+	if [ -x /bin/ip ]; then
+		echo /bin/ip
+	else
+		echo /sbin/ip
+	fi
+}
+
 iproute2_depend()
 {
-	program /sbin/ip
+	program $(_ip)
 	provide interface
 	after ifconfig
 }
@@ -160,7 +169,8 @@ _add_route()
 
 	# We cannot use a metric if we're using a nexthop
 	if ! ${have_metric} && \
-		[ -n "${metric}" -a -z "${cmd##* nexthop }" ]
+		[ -n "${metric}" -a \
+			"${cmd##* nexthop }" = "$cmd" ]
 	then
 		cmd="${cmd} metric ${metric}"
 	fi

scripts/on_ac_power

@@ -6,26 +6,30 @@
 if [ -f /proc/acpi/ac_adapter/AC*/state ]; then
 	cat /proc/acpi/ac_adapter/AC*/state | while read line; do
 		case "$line" in
-		"state:"*"off-line") return 128;;
+		"state:"*"off-line") exit 128;;
 		esac
 	done
+elif [ -f /sys/class/power_supply/AC*/online ]; then
+	cat /sys/class/power_supply/AC*/online | while read line; do
+		[ "${line}" = 0 ] && exit 128
+	done
 elif [ -f /proc/pmu/info ]; then
 	cat /proc/pmu/info | while read line; do
 		case "$line" in
-		"AC Power"*": 0") return 128;;
+		"AC Power"*": 0") exit 128;;
 		esac
 	done
 elif type envstat >/dev/null 2>&1; then
 	# NetBSD has envstat
 	envstat -d acpiacad0 2>/dev/null | while read line; do
 		case "$line" in
-		"connected:"*"OFF") return 128;;
+		"connected:"*"OFF") exit 128;;
 		esac
 	done
 elif sysctl -q hw.acpi.acline >/dev/null 2>/dev/null; then
 	case $(sysctl -n hw.acpi.acline) in
-	0) return 1;;
+	0) exit 1;;
-	*) return 0;;
+	*) exit 0;;
 	esac
 else
 	exit 255

sh/init-early.sh.Linux.in

@@ -17,7 +17,7 @@ fi
 if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/consolefont \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/consolefont ]; then
 	printf "\033%s" "$termencoding" >"$CONSOLE" 2>/dev/null
-	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /bin/setfont ]; then
+	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /usr/bin/setfont ]; then
 		font="$(cat "$RC_LIBEXECDIR"/console/font)"
 		[ -c "$CONSOLE" ] && cons="-C $CONSOLE"
 		setfont $cons "$RC_LIBEXECDIR"/console/"$font" 2>/dev/null
@@ -29,7 +29,7 @@ if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/keymaps \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/keymaps ]; then
 	kbd_mode $kmode -C "$CONSOLE" 2>/dev/null
 	if [ -r "$RC_LIBEXECDIR"/console/keymap ]; then
-		loadkeys "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
+		loadkeys -q "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
 	fi
 fi
 

sh/rc-functions.sh.in

@@ -38,7 +38,8 @@ stop_addon()
 	( import_addon "$1-stop" )
 }
 
-net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
+net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre
+ncpfs nfs nfs4 ocfs2 shfs smbfs $extra_net_fs_list"
 is_net_fs()
 {
 	[ -z "$1" ] && return 1

sh/rc-mount.sh

@@ -26,6 +26,7 @@ do_unmount()
 		# Unmounting a shared mount can unmount other mounts, so
 		# we need to check the mount is still valid
 		mountinfo --quiet "$mnt" || continue
+		mnt=$(printf "$mnt")
 
 		case "$cmd" in
 			umount)

src/libeinfo/libeinfo.c

@@ -817,7 +817,7 @@ _eend(FILE * EINFO_RESTRICT fp, int col, ECOLOR color, const char *msg)
 	if (!msg)
 		return;
 
-	cols = get_term_columns(fp) - (strlen(msg) + 3);
+	cols = get_term_columns(fp) - (strlen(msg) + 5);
 
 	/* cons25 is special - we need to remove one char, otherwise things
 	 * do not align properly at all. */
@@ -831,9 +831,6 @@ _eend(FILE * EINFO_RESTRICT fp, int col, ECOLOR color, const char *msg)
 	if (term_is_cons25)
 		cols--;
 
-	/* If extra spacing is required around msg, then please change
-	 * via a runtime knob and leave this default as is as it saves 2 
-	 * valuable columns when running on 80 column screens. */
 	if (cols > 0 && colour_terminal(fp)) {
 		fprintf(fp, "%s%s %s[%s %s %s]%s\n", up, tgoto(goto_column, 0, cols),
 		    ecolor(ECOLOR_BRACKET), ecolor(color), msg,

src/rc/rc.c

@@ -773,7 +773,7 @@ handle_bad_signal(int sig)
 #endif
 
 #include "_usage.h"
-#define getoptstring "o:" getoptstring_COMMON
+#define getoptstring "o:s:S" getoptstring_COMMON
 static const struct option longopts[] = {
 	{ "override", 1, NULL, 'o' },
 	{ "service",  1, NULL, 's' },

src/rc/runscript.c

@@ -1318,6 +1318,12 @@ runscript(int argc, char **argv)
 			prefix = NULL;
 			retval = svc_exec("status", NULL);
 		} else {
+			if (strcmp(optarg, "pause") == 0) {
+				ewarn("WARNING: 'pause' is deprecated; please use '--nodeps stop'");
+				deps = false;
+				optarg = "stop";
+			}
+
 			if (strcmp(optarg, "conditionalrestart") == 0 ||
 			    strcmp(optarg, "condrestart") == 0)
 			{