Release openrc-0.5.0

Makefile

@@ -2,9 +2,11 @@
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-include Makefile.inc
+NAME=		openrc
+VERSION=	0.5.0
+PKG=		${NAME}-${VERSION}
 
-SUBDIR=		conf.d etc init.d man scripts sh src
+SUBDIR=		conf.d etc init.d man sh src
 
 # Build our old net foo or not
 _OLDNET_SH=	case "${MKOLDNET}" in \
@@ -14,14 +16,6 @@ _OLDNET_SH=	case "${MKOLDNET}" in \
 _OLDNET!=	${_OLDNET_SH}
 SUBDIR+=	${_OLDNET}$(shell ${_OLDNET_SH})
 
-# Build pkgconfig or not
-_PKGCONFIG_SH=	case "${MKPKGCONFIG}" in \
-		[Yy][Ee][Ss]|"") echo "pkgconfig";; \
-		*) echo "";; \
-		esac
-_PKGCONFIG!=	${_PKGCONFIG_SH}
-SUBDIR+=	${_PKGCONFIG}$(shell ${_PKGCONFIG_SH})
-
 # We need to ensure that runlevels is done last
 SUBDIR+=	runlevels
 

Makefile.inc

@@ -1,3 +0,0 @@
-NAME=		openrc
-VERSION=	0.6.6
-PKG=		${NAME}-${VERSION}

README

@@ -11,7 +11,6 @@ PROGLDFLAGS=-static
 LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
 MKPAM=pam
-MKPKGCONFIG=no
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
 MKOLDNET=yes
@@ -41,7 +40,7 @@ If any of the following files exist then we do not overwrite them
 rc and rc.shutdown are the hooks from the BSD init into OpenRC.
 devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
 hook into OpenRC.
-inittab is the same, but for SysVInit as used by most Linux distributions.
+inittab is the same, but for SysVInit as used by most Linux distrubtions.
 This can be found in the support folder.
 Obviously, if you're installing this onto a system that does not use OpenRC
 by default then you may wish to backup the above listed files, remove them
@@ -58,15 +57,14 @@ If you installed OpenRC from your chosen distribution, you should report
 bugs directly to them. For example, if you use Gentoo and emerged OpenRC
 then you should reports bugs to http://bugs.gentoo.org.
 
-Otherwise, you can report them directly to me at
+Otherwise, you can report them directly to me at http://bugs.marples.name
-http://roy.marples.name/projects/openrc
 
 
 History - by Roy Marples
 ------------------------
 I became a Gentoo/Linux developer in 2004 and wrote the modular network
 scripts for the Gentoo baselayout package. baselayout is a collection of
-bash scripts to bring up your computer and its services.
+bash scripts to bring up your computer and it's services.
 Then towards the end of 2005 I found myself as the primary maintainer
 for baselayout.
 

README.net

@@ -1,36 +0,0 @@
-OpenRC Network Ideals
----------------------
-
-The new style networking for OpenRC is very simplistic - provide a basic means
-of configuring static interface address and routes whilst allowing the
-possibility to run any command at any point.
-
-In a nutshell, init.d/network is a wrapper around ifconfig(8) and
-init.d/staticroute is wrapper around route(8).
-
-In the Perfect World (TM) ifconfig should be able to configure everything
-about the interface easily * . The BSD family almost get this right and Linux
-epically fails.
-
-* Only static configuration, including link setup.
-For dynamic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
-provides your needs.
-
-It fails because there are many tools to do the same job and often have
-vastly different syntax where they could be similar. In other words, there
-is no coherence.
-
-OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
-for each tool and allowed a script per interface. Over the years, this design
-has proven very hard to maintain as each user has their own idea of how
-things should work. Also, there were (and still are) race conditions.
-
-So where do we go from here?
-Well, it's possible to use the new network scripts using the tools
-currently available. It's just harder as you have to know them and their
-documentation can be lacking at times.
-The correct end goal is a BSD style ifconfig tool.
-I've started work on it, but the project has stalled somewhat.
-It's display only right now and the source is not yet publicly available.
-If you have the skills and share the vision then contact me privately and
-we'll take it from there.

conf.d/.gitignore

@@ -1,2 +1 @@
 network
-staticroute

conf.d/Makefile

@@ -1,19 +1,14 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname local localmount network staticroute urandom
+CONF=	bootmisc fsck hostname local localmount network urandom
 
-TARGETS+=	network staticroute
+TARGETS+=	network
-CLEANFILES+=	network staticroute
+CLEANFILES+=	network
 
 MK=	../mk
 include ${MK}/os.mk
 include Makefile.${OS}
 include ${MK}/scripts.mk
 
-SOS?=	BSD
+network: network.in network.${OS}
-
+	cp network.in network
-network: network.in network.${SOS}
+	[ -e network.${OS} ] && cat network.${OS} >> network || true
-	cp $@.in $@
-	[ -e $@.${SOS} ] && cat $@.${SOS} >> $@ || true
-
-staticroute: staticroute.${SOS}
-	cp $@.${SOS} $@

conf.d/Makefile.FreeBSD

@@ -1 +1,3 @@
 CONF+=	ipfw moused powerd rarpd savecore syscons
+
+network.${OS}:

conf.d/Makefile.Linux

@@ -1,2 +1 @@
 CONF+=	consolefont dmesg hwclock keymaps modules
-SOS=	Linux

conf.d/Makefile.NetBSD

@@ -1 +1,3 @@
 CONF+=	moused rarpd savecore
+
+network.${OS}:

conf.d/fsck

@@ -13,11 +13,6 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
-# Most modern fs's don't require a full fsck on boot, but for those that do
-# it may be advisable to skip this when running on battery.
-# WARNING: Do not turn this off if you have any JFS partitions.
-fsck_on_battery="YES"
-
 # fsck_shutdown causes fsck to trigger during shutdown as well as startup.
 # The end result of this is that if any periodic non-root filesystem checks are
 # scheduled, under normal circumstances the actual check will happen during

conf.d/hwclock

@@ -1,11 +1,11 @@
-# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
+# Set CLOCK to "UTC" if your system clock is set to UTC (also known as
-# Greenwich Mean Time).  If that clock is set to the local time, then 
+# Greenwich Mean Time).  If your clock is set to the local time, then 
 # set CLOCK to "local".  Note that if you dual boot with Windows, then 
 # you should set it to "local".
 clock="UTC"
 
 # If you want to set the Hardware Clock to the current System Time 
-# (software clock) during shutdown, then say "YES" here.
+# during shutdown, then say "YES" here.
 # You normally don't need to do this if you run a ntp daemon.
 clock_systohc="NO"
 

conf.d/network.BSD

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"

conf.d/network.Linux

@@ -1,20 +1,8 @@
-
-# You can assign a default route
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"
-
 # ifconfig under Linux is not that powerful and doesn't easily handle
 # multiple addresses
 # On the other hand, ip (iproute2) is quite powerful and is also supported
 #ip_eth0="192.168.0.10/24; 192.168.10.10/24"
 
-# You can also use ip to add the default route.
-#defaultiproute="via 192.168.0.1"
-#defaultiproute6="via 2001:a:b:c"
-
-# ip doesn't handle MTU like ifconfig, but we can do it like so
-#ifup_eth0="ip link set \$int mtu 1500"
-
 # Create a bonded interface
 #interfaces="bond0"
 #ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"

conf.d/network.in

@@ -9,6 +9,8 @@
 # You should note that we don't stop the network at system shutdown by default.
 # If you really need this, then set shutdown_network=YES
 
+# You can assign a default route
+#defaultroute="192.168.0.1"
 # Lastly, the interfaces variable pulls in virtual interfaces that cannot
 # be automatically detected.
 #interfaces="br0 bond0 vlan0"
@@ -24,5 +26,3 @@
 # If you require DHCP, you should install dhcpcd and it to the boot or
 # default runlevel.
 
-# NIS users can set the domain name here
-#domainname="foobar"

conf.d/staticroute.BSD

@@ -1,6 +0,0 @@
-# Separate multiple routes using ; or new lines.
-# /etc/route.conf(5) takes precedence over this configuration.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.Linux

@@ -1,8 +0,0 @@
-# Separate multiple routes using ; or new lines.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
-#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
-
-# Example static routes using iproute2. See ip(8) for syntax.
-#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

doc/net.example.BSD.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labeled INTERFACE HANDLERS.
+# down to the section labelled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -22,10 +22,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatibility with existing ones.
+# compatability with existing ones.
 # 
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have its package installed
+# you specify a module here that doesn't have it's package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -43,6 +43,11 @@
 #       (eth0:1, eth0:2, etc)
 #       iproute2 does not do this as there is no need to
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
+# Or you can use sequence expressions
+#config_eth0="192.168.0.{2..4}/24"  FIXME - may not work with baselayout2
+# which does the same as above. Be careful though as if you use this and
+# fallbacks, you have to ensure that both end up with the same number of
+# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -96,8 +101,8 @@
 #modules="iwconfig"
 
 # ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
-# that scans, associates and re-configures if association is lost.
+# that scans, assoicates and re-configures if assocation is lost.
-# We call it iwconfig to separate the wireless setup from ifconfig.
+# We call it iwconfig to seperate the wireless setup from ifconfig.
 ####################################
 # HINTS
 #
@@ -182,7 +187,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting its SSID
+# This is used when the Access Point is not broadcasting it's SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -193,7 +198,7 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and separate them with a space
+# Surround each SSID with the " character and seperate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
 #preferred_aps="SSID1 SSID2"
@@ -208,9 +213,9 @@
 # any other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred
 # list
-# "forcepreferred" means it will forcibly connect to APs in order if it does
+# "forcepreferred" means it will forceably connect to APs in order if it does
 # not find them in a scan
-# "forcepreferredonly" means it forcibly connects to the APs in order and
+# "forcepreferredonly" means it forceably connects to the APs in order and
 # does not bother to scan
 # "forceany" does the same as forcepreferred + connects to any other 
 # available AP
@@ -237,12 +242,12 @@
 
 ##################################################
 # wpa_supplicant
-# emerge net-wireless/wpa_supplicant
+# emerge net-wireless/wpa-supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Consult the wpa_supplicant.conf.example that is installed in
+# Console the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 
-# By default we don't wait for wpa_supplicant to associate and authenticate.
+# By default we don't wait for wpa_suppliant to associate and authenticate.
 # If you would like to, so can specify how long in seconds
 #associate_timeout_eth0=60
 # A value of 0 means wait forever.
@@ -320,7 +325,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release its lease when it stops, not to
+# This tells the dhcp client to release it's lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to

doc/net.example.Linux.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labeled INTERFACE HANDLERS.
+# down to the section labelled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -23,10 +23,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatibility with existing ones.
+# compatability with existing ones.
 # 
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have its package installed
+# you specify a module here that doesn't have it's package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -70,6 +70,11 @@
 #       iproute2 does not do this as there is no need to
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
 # However, that only works with CIDR addresses, so you can't use netmask.
+# Or you can use sequence expressions
+#config_eth0="192.168.0.{2..4}/24"
+# which does the same as above. Be careful though as if you use this and
+# fallbacks, you have to ensure that both end up with the same number of
+# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -106,7 +111,7 @@
 
 # Each module described below can set a default base metric, lower is
 # preferred over higher. This is so we can prefer a wired route over a
-# wireless route automatically. You can override this by setting
+# wireless route automaticaly. You can override this by setting
 #metric_eth0="100"
 # or on a global basis
 #metric="100"
@@ -253,7 +258,7 @@
 #key_SSID="s:foobar enc open"
 #key_SSID="1234-5678-9012 enc open"
 
-# You may want to set multiple keys - here's an example
+# You may want to set muliple keys - here's an example
 # It sets 4 keys on the card and instructs to use key 2 by default
 #key_SSID="[1] s:passkey1 key [2] s:passkey2 key [3] s:passkey3 key [4] s:passkey4 key [2]"
 
@@ -283,7 +288,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting its SSID
+# This is used when the Access Point is not broadcasting it's SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -294,7 +299,7 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and separate them with a space
+# Surround each SSID with the " character and seperate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
 #preferred_aps="SSID1 SSID2" 
@@ -307,9 +312,9 @@
 # "any" means it will connect to visible APs in the preferred list and then any
 # other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred list
-# "forcepreferred" means it will forcibly connect to APs in order if it does not find
+# "forcepreferred" means it will forceably connect to APs in order if it does not find
 # them in a scan
-# "forcepreferredonly" means it forcibly connects to the APs in order and does not bother
+# "forcepreferredonly" means it forceably connects to the APs in order and does not bother
 # to scan
 # "forceany" does the same as forcepreferred + connects to any other available AP
 # Default is "any"
@@ -336,16 +341,16 @@
 
 ############################################################
 # wpa_supplicant
-# emerge net-wireless/wpa_supplicant
+# emerge net-wireless/wpa-supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Consult the wpa_supplicant.conf.example that is installed in
+# Console the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 # To configure wpa_supplicant
 #wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards
 # Consult wpa_supplicant for more drivers - the default is -Dwext which should
 # work for most cards.
 
-# By default we don't wait for wpa_supplicant to associate and authenticate.
+# By default we don't wait for wpa_suppliant to associate and authenticate.
 # If you need to change this behaviour then you don't know how our scripts work
 # and setting this value could cause strange things to happen.
 # If you would like to, so can specify how long in seconds.
@@ -448,7 +453,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release its lease when it stops, not to
+# This tells the dhcp client to release it's lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to
@@ -572,7 +577,7 @@
 #config_bond0="null" # You may not want to assign an IP the the bond
 
 # You can also configure the bond here, which must be done via sysfs on 2.6
-# kernels or newer. See the kernel bonding documentation for a description of
+# kernels or newer. See the kernel bonding documention for a description of
 # these options.
 #arp_ip_target_bond0="+26.0.0.0"
 
@@ -658,7 +663,7 @@
 #
 # Dead peer detection
 #	lcp-echo-interval 15	# Send a LCP echo every 15 seconds
-#	lcp-echo-failure 3	# Make peer dead after 3 consecutive
+#	lcp-echo-failure 3	# Make peer dead after 3 consective
 #				# echo-requests
 #	
 # Compression options - use these to completely disable compression
@@ -822,8 +827,8 @@
 #config_nas0="'192.168.0.1/24'"
 
 #-----------------------------------------------------------------------------
-# Tunneling
+# Tunnelling
-# WARNING: For tunneling it is highly recommended that you
+# WARNING: For tunnelling it is highly recommended that you
 # emerge sys-apps/iproute2
 #
 # For GRE tunnels
@@ -838,7 +843,7 @@
 
 # 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you
 # have a non-private address configured on an interface.
-# link_6to4="eth0"		# Interface to base its addresses on
+# link_6to4="eth0"		# Interface to base it's addresses on
 # config_6to4="ip6to4"
 # You may want to depend on eth0 like so
 #rc_need_6to4="net.eth0"
@@ -848,7 +853,7 @@
 # sit0 - otherwise use a different name like 6to4 in the example above.
 
 # You can also specify a relay and suffix if you like.
-# The default relay is 192.88.99.1 and the default suffix is :1
+# The default relay is 192.88.99.1 and the defualt suffix is :1
 #relay_6to4="192.168.3.2"
 #suffix_6to4=":ff"
 
@@ -896,7 +901,7 @@
 # and you're done :)
 
 # By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services know that network is up
+# If you would like it to wait so that other services now that network is up
 # then you can specify a timeout here.
 #plug_timeout="10"
 # A value of 0 means wait forever.
@@ -936,8 +941,8 @@
 
 #preup() {
 #	# Test for link on the interface prior to bringing it up.  This
-#	# only works on some network adapters and requires the
+#	# only works on some network adapters and requires the mii-diag
-#	# sys-apps/net-tools package to be installed.
+#	# package to be installed.
 #	if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
 #		ewarn "No link on ${IFACE}, aborting configuration"
 #		return 1
@@ -987,7 +992,7 @@
 #	#	'from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100' \
 #	#	'from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100' \
 #	#"
-#	eval set -- \$rules_${IFVAR}
+#	eval set -- $\rules_${IFVAR}
 #	if [ $# != 0 ]; then
 #		einfo "Adding IP policy routing rules"
 #		eindent
@@ -998,7 +1003,7 @@
 #		else
 #			for x; do
 #				ebegin "${x}"
-#				ip rule add ${x}
+#				ip rule add ${x} dev "${IFACE}"
 #				eend $?
 #			done
 #		fi

etc/rc.conf.in

@@ -2,7 +2,7 @@
 
 # Set to "YES" if you want the rc system to try and start services
 # in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with its name as the output will get
+# prefix the service output with it's name as the output will get
 # jumbled up.
 # WARNING: whilst we have improved parallel, it can still potentially lock
 # the boot process. Don't file bugs about this unless you can supply
@@ -11,8 +11,7 @@
 
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
-# this feature. This feature is automatically disabled if rc_parallel is
+# this feature.
-# set to YES.
 #rc_interactive="YES"
 
 # If we need to drop to a shell, you can specify it here.
@@ -76,14 +75,8 @@
 # Set unicode to YES to turn on unicode support for keyboards and screens.
 #unicode="NO"
 
-# Below is the default list of network fstypes.
+# Network fstypes. Below is the default.
-#
+net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
-# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
-# nfs nfs4 ocfs2 shfs smbfs
-#
-# If you would like to add to this list, you can do so by adding your
-# own fstypes to the following variable.
-#extra_net_fs_list=""
 
 ##############################################################################
 # SERVICE CONFIGURATION VARIABLES

init.d.misc/.gitignore

@@ -1,11 +0,0 @@
-avahi-dnsconfd
-avahid
-dhcpcd
-dbus
-hald
-named
-ntpd
-openvpn
-polkitd
-sshd
-wpa_supplicant

init.d.misc/wpa_supplicant.in

@@ -14,7 +14,7 @@ depend()
 	use logger
 	after bootmisc modules
 	before dns dhcpcd net
-	keyword -shutdown
+	keyword noshutdown
 }
 
 find_wireless()
@@ -24,9 +24,7 @@ find_wireless()
 	case "$RC_UNAME" in
 	Linux)
 		for iface in /sys/class/net/*; do
-			if [ -e "$iface"/wireless -o \
+			if [ -e "$iface"/wireless ]; then
-				-e "$iface"/phy80211 ]
-			then
 				echo "${iface##*/}"
 				return 0
 			fi

init.d/.gitignore

@@ -24,7 +24,6 @@ mount-ro
 mtab
 numlock
 procfs
-staticroute
 sysfs
 devdb
 hostid
@@ -35,8 +34,6 @@ rc-enabled
 rpcbind
 savecore
 swap-blk
-swclock
 syslogd
-termencoding
 ttys
 wscons

init.d/Makefile

@@ -1,7 +1,6 @@
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
-	network.in root.in savecache.in staticroute.in swap.in swclock.in \
+	network.in root.in savecache.in swap.in sysctl.in urandom.in
-	sysctl.in urandom.in
 BIN=	${OBJS}
 
 # Build our old net foo or not

init.d/adjkerntz.in

@@ -22,7 +22,7 @@ depend()
 	   [ "$clock" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
 		need root
 	fi
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start()

init.d/bootmisc.in

@@ -4,10 +4,11 @@
 
 depend()
 {
+	use hostname
 	need localmount
 	before logger
 	after clock sysctl
-	keyword -prefix
+	keyword noprefix
 }
 
 dir_writeable()
@@ -25,7 +26,7 @@ cleanup_tmp_dir()
 		mkdir -p "$dir" || return $?
 	fi
 	dir_writeable "$dir" || return 1
-	chmod a+rwt "$dir"
+	chmod +t "$dir"
 	cd "$dir"
 	if yesno $wipe_tmp; then
 		ebegin "Wiping $dir directory"
@@ -35,12 +36,6 @@ cleanup_tmp_dir()
 		# Faster than find
 		rm -rf -- [^ajlq\.]*
 
-		# pam_mktemp creates a .private directory within which
-		# each user gets a private directory with immutable
-		# bit set; remove the immutable bit before trying to
-		# remove it.
-		[ -d /tmp/.private ] && chattr -R -a /tmp/.private 2> /dev/null
-
 		find $startopts ! -name . \
 			! -path "./lost+found" \
 			! -path "./lost+found/*" \
@@ -54,6 +49,8 @@ cleanup_tmp_dir()
 			! -path "./aquota.group/*" \
 			! -path "./journal" \
 			! -path "./journal/*" \
+			! -path "./.private" \
+			! -path "./.private/*" \
 			-exec rm -rf {} \;
 		eend 0
 	else
@@ -79,10 +76,9 @@ start()
 	# Remove any added console dirs
 	rm -rf "$RC_LIBEXECDIR"/console
 
-	local logw=false runw=false extra=
+	local logw=false runw=false
 	# Ensure that our basic dirs exist
-	[ "$RC_UNAME" = Linux ] && extra=/var/lib/misc # Satisfy Linux FHS
+	for x in /var/log /var/run /tmp; do
-	for x in /var/log /var/run /tmp $extra; do
 		if ! [ -d $x ]; then
 			if ! mkdir -p $x; then
 				eend 1 "failed to create needed directory $x"
@@ -98,7 +94,7 @@ start()
 		for x in "" $xtra; do
 			mkutmp /var/run/utmp$x
 		done
-		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
+		[ -e /var/log/wtmp ] && mkutmp /var/log/wtmp
 		eend 0
 
 		ebegin "Cleaning /var/run"
@@ -109,7 +105,7 @@ start()
 			# Clean stale sockets
 			if [ -S "$x" ]; then
 				if type fuser >/dev/null 2>&1; then
-					fuser "$x" >/dev/null 2>&1 || rm -- "$x"
+					fuser "$x" 2>/dev/null || rm -- "$x"
 				else
 					rm -- "$x"
 				fi
@@ -153,7 +149,7 @@ start()
 		fi
 	fi
 
-	[ -w /etc/nologin ] && rm -f /etc/nologin
+	rm -f /etc/nologin
 	return 0
 }
 

init.d/consolefont.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword noopenvz noprefix nouml novserver noxenu
 }
 
 start()
@@ -45,10 +45,8 @@ start()
 	[ -d /dev/vc ] && ttydev=/dev/vc/
 	x=1
 	while [ $x -le $ttyn ]; do
-		if ! setfont $consolefont $param -C $ttydev$x >/dev/null; then
+		setfont $consolefont $param -C $ttydev$x >/dev/null 
-			retval=1
+		retval=$(($retval + $?))
-			break
-		fi
 		x=$(($x + 1))
 	done
 	eend $retval

init.d/devd.in

@@ -10,7 +10,7 @@ depend() {
 	need localmount
 	after bootmisc
 	before net.lo0
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start_pre() {

init.d/devfs.in

@@ -6,7 +6,7 @@ description="Mount system critical filesystems in /dev."
 
 depend() {
 	use dev
-	keyword -prefix -vserver
+	keyword noprefix novserver
 }
 
 start() {

init.d/dmesg.in

@@ -7,7 +7,7 @@ description="Set the dmesg level for a cleaner boot"
 depend()
 {
 	before dev modules
-	keyword -vserver
+	keyword novserver
 }
 
 start()

init.d/dumpon.in

@@ -6,7 +6,7 @@ description="Configures a specific kernel dump device."
 
 depend() {
 	need swap
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start() {

init.d/fsck.in

@@ -9,7 +9,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -timeout -vserver -lxc
+	keyword nojail noopenvz noprefix notimeout novserver
 }
 
 _abort() {
@@ -30,6 +30,33 @@ _forcefsck()
 	[ -e /forcefsck ] || get_bootparam forcefsck
 }
 
+_on_ac_power()
+{
+	if [ -f /proc/acpi/ac_adapter/AC/state ]; then
+		cat /proc/acpi/ac_adapter/AC/state | while read line; do
+			case "$line" in
+			"state:"*"off-line") return 128;;
+			esac
+		done
+	elif [ -f /proc/pmu/info ]; then
+		cat /proc/pmu/info | while read line; do
+			case "$line" in
+			"AC Power"*": 0") return 128;;
+			esac
+		done
+	elif type envstat >/dev/null 2>&1; then
+		# NetBSD has envstat
+		envstat -d acpiacad0 2>/dev/null | while read line; do
+			case "$line" in
+			"connected:"*"OFF") return 128;;
+			esac
+		done
+	else
+		return 0
+	fi
+	[ $? != 128 ]
+}
+
 start()
 {
 	local fsck_opts= p= check_extra=
@@ -41,7 +68,7 @@ start()
 	if _forcefsck; then
 		fsck_opts="$fsck_opts -f"
 		check_extra="(check forced)"
-	elif ! yesno ${fsck_on_battery:-YES} && ! on_ac_power; then
+	elif ! _on_ac_power; then
 		ewarn "Skipping fsck due to not being on AC power"
 		return 0
 	fi

init.d/hostid.in

@@ -9,7 +9,7 @@ depend()
 {
 	use root
 	before devd net
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 _set()

init.d/hostname.in

@@ -5,7 +5,7 @@
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -prefix
+	keyword noprefix
 }
 
 start()

init.d/hwclock.in

@@ -28,7 +28,7 @@ depend()
 	else
 		before *
 	fi
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword noopenvz noprefix nouml novserver noxenu
 }
 
 setupopts()
@@ -118,7 +118,7 @@ stop()
 
 	if ! yesno $clock_adjfile; then
 		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
+		if LC_ALL=C hwclock --help | grep -q "\-\-noadjfile"; then
 			utc_cmd="$utc_cmd --noadjfile"
 		fi
 	fi

init.d/ipfw.in

@@ -13,7 +13,7 @@ opts="panic showstatus"
 depend() {
 	before net
 	provide firewall
-	keyword -jail
+	keyword nojail
 }
 
 ipfw() {

init.d/keymaps.in

@@ -8,14 +8,14 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword noopenvz noprefix nouml novserver noxenu
 }
 
 start()
 {
 	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 	: ${unicode:=$UNICODE}
-	: ${keymap:=$KEYMAP}
+	: =${keymap:=$KEYMAP}
 	: ${extended_keymaps:=$EXTENDED_KEYMAPS}
 	: ${windowkeys:=$SET_WINDOWSKEYS} 
 	: ${fix_euro:=$FIX_EURO}
@@ -34,25 +34,15 @@ start()
 		echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
 	fi
 
-	local wkeys= kmode="-a" msg="ASCII"
+	ebegin "Loading key mappings [$keymap]"
+	local loadkeys_uni= wkeys= kmode="-a" msg="ASCII"
 	if yesno $unicode; then
+		loadkeys_uni="--unicode"
 		kmode="-u"
 		msg="UTF-8"
 	fi
 	yesno $windowkeys && wkeys="windowkeys"
-
+	loadkeys -q $loadkeys_uni $wkeys $keymap $extended_keymaps
-	# Set terminal encoding to either ASCII or UNICODE.
-	# See utf-8(7) for more information.
-	ebegin "Setting keyboard mode [$msg]"
-	n=1
-	while [ $n -le $ttyn ]; do
-		kbd_mode $kmode -C $ttydev$n
-		n=$(($n + 1))
-	done
-	eend 0
-
-	ebegin "Loading key mappings [$keymap]"
-	loadkeys -q $wkeys $keymap $extended_keymaps
 	eend $? "Error loading key mappings" || return $?
 
 	if yesno $fix_euro; then
@@ -62,6 +52,20 @@ start()
 		eend $?
 	fi
 
+	# Set terminal encoding to either ASCII or UNICODE.
+	# See utf-8(7) for more information.
+	ebegin "Setting keyboard mode [$msg]"
+	if yesno $unicode; then
+		dumpkeys ${dumpkeys_charset:+-c} \
+			$dumpkeys_charset | loadkeys --unicode
+	fi
+	n=1
+	while [ $n -le $ttyn ]; do
+		kbd_mode $kmode -C $ttydev$n
+		n=$(($n + 1))
+	done
+	eend 0
+
 	# Save the keymapping for use immediately at boot
 	if [ -w "$RC_LIBEXECDIR" ]; then
 		mkdir -p "$RC_LIBEXECDIR"/console

init.d/killprocs.in

@@ -6,7 +6,7 @@ description="Kill all processes so we can unmount disks cleanly."
 
 depend()
 {
-	keyword -prefix
+	keyword noprefix
 }
 
 start()

init.d/local.in

@@ -7,7 +7,7 @@ description="Executes user commands in /etc/conf.d/local"
 depend()
 {
 	after *
-	keyword -timeout
+	keyword notimeout
 }
 
 start()
@@ -18,6 +18,11 @@ start()
 		local_start
 	fi
 
+	# Support old configs
+	if [ -e @SYSCONFDIR@/conf.d/local.start ]; then
+		. @SYSCONFDIR@/conf.d/local.start
+	fi
+
 	eend $? "Failed to start local"
 }
 
@@ -29,5 +34,10 @@ stop()
 		local_stop
 	fi
 
+	# Support old configs
+	if [ -e @SYSCONFDIR@/conf.d/local.stop ]; then
+		. @SYSCONFDIR@/conf.d/local.stop
+	fi
+
 	eend $? "Failed to stop local"
 }

init.d/localmount.in

@@ -8,22 +8,19 @@ depend()
 {
 	need fsck
 	use lvm modules mtab
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword nojail noopenvz noprefix novserver
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local types="noproc" x= no_netdev=
+	local types="noproc" x=
 	for x in $net_fs_list; do
 		types="${types},${x}"
 	done
 
-	if [ "$RC_UNAME" = Linux ]; then
-		no_netdev="-O no_netdev"
-	fi
 	ebegin "Mounting local filesystems"
-	mount -at "$types" $no_netdev
+	mount -at "$types"
 	eend $? "Some local filesystem failed to mount"
 
 	# Always return 0 - some local mounts may not be critical for boot

init.d/mixer.in

@@ -7,7 +7,7 @@ extra_commands="restore"
 depend()
 {
 	need localmount
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 restore()

init.d/modules.in

@@ -7,7 +7,7 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -vserver -lxc
+	keyword noopenvz noprefix novserver
 }
 
 start()

init.d/mount-ro.in

@@ -7,7 +7,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 depend()
 {
 	need killprocs savecache
-	keyword -prefix -openvz -vserver -lxc
+	keyword noprefix noopenvz novserver
 }
 
 start()

init.d/moused.in

@@ -16,7 +16,7 @@ depend()
 {
 	need localmount
 	after bootmisc
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start()

init.d/mtab.in

@@ -7,17 +7,11 @@ description="Update /etc/mtab to match what the kernel knows about"
 depend()
 {
 	need root
-	keyword -prefix
+	keyword noprefix
 }
 
 start()
 {
-	# /etc/mtab could be a symlink to /proc/mounts
-	if [ ! -w /etc/mtab -a -L /etc/mtab ]; then
-		eeinfo "Skipping mtab update (non writeable symlink)"
-		return 0
-	fi
-
 	ebegin "Updating /etc/mtab"
 	if ! echo 2>/dev/null >/etc/mtab; then
 		ewend 1 "/etc/mtab is not updateable"

init.d/net.lo.in

@@ -21,7 +21,7 @@ depend()
 	need localmount
 	after bootmisc
 	provide net
-	keyword -jail -prefix -vserver
+	keyword nojail noprefix novserver
 
 	case "${IFACE}" in
 		lo|lo0);;

init.d/netmount.in

@@ -35,7 +35,7 @@ depend()
 	need net $pmap
 	use afc-client amd autofs openvpn
 	use dns nfs nfsmount portmap rpcbind rpc.statd rpc.lockd
-	keyword -jail -prefix -vserver
+	keyword nojail noprefix novserver
 }
 
 start()

init.d/network.in

@@ -13,7 +13,7 @@ depend()
 	need localmount
 	after bootmisc
 	provide net
-	keyword -jail -prefix -vserver
+	keyword nojail noprefix novserver
 }
 
 uniqify()
@@ -57,32 +57,6 @@ sys_interfaces()
 	esac
 }
 
-tentative()
-{
-	local inet= address= rest=
-
-	case "$RC_UNAME" in
-	Linux)
-		[ -x /sbin/ip ] || [ -x /bin/ip ] || return 1
-		[ -n "$(ip -f inet6 addr show tentative)" ]
-		;;
-	*)
-		local inet= address= rest=
-		LC_ALL=C ifconfig -a | while read inet address rest; do
-	 		case "${inet}" in
-			inet6)
-				case "${rest}" in
-				*" "tentative*) return 2;;
-				esac
-				;;
-			esac
-		done
-		[ $? = 2 ]
-		;;
-	esac
-}
-
-
 auto_interfaces()
 {
 	local ifs= c= f=
@@ -129,28 +103,13 @@ dumpargs()
 	esac
 }
 
-intup=false
 runip()
 {
 	local int="$1" err=
+
 	shift
-
-	# Ensure we have a valid broadcast address
-	case "$@" in
-	*" broadcast "*|*" brd "*) ;;
-	*:*) ;; # Ignore IPv6
-	*) set -- "$@" brd +;;
-	esac
-
 	err=$(LC_ALL=C ip address add "$@" dev "$int" 2>&1)
-	if [ -z "$err" ]; then
+	[ -z "$err" ] && return 0
-		# ip does not bring up the interface when adding addresses
-		if ! $intup; then
-			ip link set "$int" up
-			intup=true
-		fi
-		return 0
-	fi
 	if [ "$err" = "RTNETLINK answers: File exists" ]; then
 		ip address del "$@" dev "$int" 2>/dev/null
 	fi
@@ -161,9 +120,8 @@ runip()
 routeflush()
 {
 	if [ "$RC_UNAME" = Linux ]; then
-		if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
+		if [ -x /sbin/ip ]; then
 			ip route flush scope global
-			ip route delete default 2>/dev/null
 		else
 			# Sadly we also delete some link routes, but
 			# this cannot be helped
@@ -183,8 +141,6 @@ routeflush()
 				esac
 				route del $flags $dest $netmask $xtra
 			done
-			# Erase any default dev eth0 routes
-			route del default 2>/dev/null
 		fi
 	else
 		route -qn flush
@@ -209,20 +165,12 @@ runargs()
 start()
 {
 	local cr=0 r= int= intv= cmd= args= upcmd=
-
-	if [ -z "$domainname" -a -s /etc/defaultdomain ]; then
-		domainname=$(cat /etc/defaultdomain)
-	fi
-	if [ -n "$domainname" ]; then
-		ebegin "Setting NIS domainname: $domainname"
-		domainname "$domainname"
-		eend $?
-	fi
-
 	einfo "Starting network"
 	routeflush
 	if [ "$RC_UNAME" = "Linux" ]; then
 		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1 
+		route add -net 127.0.0.0 netmask 255.0.0.0 \
+			gw 127.0.0.1 2>/dev/null
 		route add -net 127.0.0.0 netmask 255.0.0.0 \
 			gw 127.0.0.1 reject 2>/dev/null
 	else
@@ -246,7 +194,7 @@ start()
 			-f /etc/ifup."$int" -o -f "$cf" ] || continue
 		veinfo "$int"
 		case "$func" in
-		ip)	func=runip; intup=false;;
+		ip)	func=runip;;
 		esac
 		eindent
 		runargs /etc/ifup."$int" "$upcmd"
@@ -275,41 +223,13 @@ start()
 	eoutdent
 	eend $cr
 
-	# Wait for any inet6 tentative addresses
-	r=5
-	while [ $r -gt 0 ]; do
-		tentative || break
-		[ $r = 5 ] && vebegin "Waiting for tentative addresses"
-		sleep 1
-		r=$(($r - 1))
-	done
-	if [ $r != 5 ]; then
-		[ $r != 0 ]
-		veend $?
-	fi
-	
 	if [ -n "$defaultroute" ]; then
 		ebegin "Setting default route $defaultroute"
-		route add default $defaultroute
-		eend $?
-	elif [ -n "$defaultiproute" ]; then
-		ebegin "Setting default route $defaultiproute"
-		ip route add default $defaultiproute
-		eend $?
-	fi
-
-	if [ -n "$defaultroute6" ]; then
-		ebegin "Setting default route $defaultroute6"
 		if [ "$RC_UNAME" = Linux ]; then
-			routecmd="route -A inet6 add"
+			route add default gw $defaultroute
 		else
-			routecmd="route -inet6 add"
+			route add default $defaultroute
 		fi
-		$routecmd default $defaultroute6
-		eend $?
-	elif [ -n "$defaultiproute6" ]; then
-		ebegin "Setting default route $defaultiproute6"
-		ip -f inet6 route add default $defaultiproute6
 		eend $?
 	fi
 
@@ -338,11 +258,6 @@ stop()
 		then
 			veinfo "$int"
 			runargs /etc/ifdown."$int" "$downcmd"
-			if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
-				# We need to do this, otherwise we may
-				# fail to add things correctly on restart
-				ip address flush dev "$int" 2>/dev/null
-			fi
 			ifconfig "$int" down 2>/dev/null
 			ifconfig "$int" destroy 2>/dev/null
 		fi

init.d/newsyslog.in

@@ -7,7 +7,7 @@ required_files="/etc/newsyslog.conf"
 depend()
 {
 	need localmount
-	keyword -prefix
+	keyword noprefix
 }
 
 start()

init.d/numlock.in

@@ -9,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	keyword noopenvz noprefix novserver
 }
 
 _setleds()

init.d/pf.in

@@ -11,7 +11,7 @@ extra_started_commands="reload"
 
 depend() {
 	need localmount
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start()

init.d/powerd.in

@@ -12,7 +12,7 @@ depend()
 	need localmount
 	use logger
 	after bootmisc
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start_pre()

init.d/procfs.in

@@ -8,12 +8,12 @@ depend()
 {
 	use modules devfs
 	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	keyword noopenvz noprefix novserver
 }
 
 start()
 {
-	# Make sure we insert usbcore if it's a module
+	# Make sure we insert usbcore if its a module
 	if [ -f /proc/modules -a ! -d /proc/bus/usb ]; then
 		modprobe -q usbcore
 	fi

init.d/rc-enabled.in

@@ -7,7 +7,7 @@ depend()
 	need localmount net
 	after *
 	before local
-	keyword -prefix
+	keyword noprefix
 }
 
 start()

init.d/root.in

@@ -7,7 +7,7 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword nojail noopenvz noprefix novserver
 }
 
 start()

init.d/savecache.in

@@ -22,7 +22,7 @@ start()
 		fi
 	fi
 	local save=
-	for x in deptree depconfig shutdowntime softlevel nettree rc.log; do
+	for x in deptree depconfig softlevel nettree rc.log; do
 		[ -e "$RC_SVCDIR/$x" ] && save="$save $RC_SVCDIR/$x"
 	done
 	if [ -n "$save" ]; then

init.d/savecore.in

@@ -7,7 +7,7 @@ description="Saves a kernel dump."
 depend()
 {
 	need localmount
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start()

init.d/staticroute.in

@@ -1,104 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-# This script was inspired by the equivalent rc.d staticroute from NetBSD.
-
-description="Configures static routes."
-__nl="
-"
-
-depend()
-{
-	provide net
-	use network
-	keyword -jail -prefix -vserver
-}
-
-pre_flight_checks()
-{
-	route=route
-	[ -s /etc/route.conf ] && return 0
-
-	if [ -n "$staticiproute" ]; then
-		route="ip route"
-		staticroute="$staticiproute"
-	fi
-}
-
-dump_args()
-{
-	# Route configuration file, as used by the NetBSD RC system
-	if [ -s /etc/route.conf ]; then
-		cat /etc/route.conf
-		return $?
-	fi
-
-	case "$staticroute" in
-	*"$__nl"*)
-		echo "$staticroute"
-		;;
-	*)
-		(
-			set -o noglob
-			IFS=';'; set -- $staticroute
-			IFS="$__nl"; echo "$*"
-		)
-		;;
-	esac
-}
-
-do_routes()
-{
-	local xtra= family=
-	[ "$RC_UNAME" != Linux ] && xtra=-q
-
-	ebegin "$1 static routes"
-	eindent
-	pre_flight_checks
-	dump_args | while read args; do
-		[ -z "$args" ] && continue
-		case "$args" in
-		"#"*)
-			;;
-		"+"*)
-			[ $2 = "add" ] && eval ${args#*+}
-			;;
-		"-"*)
-			[ $2 = "del" -o $2 = "delete" ] && eval ${args#*-}
-			;;
-		*)
-			veinfo "$args"
-			case "$route" in
-			"ip route")
-				ip route $2 $args
-				;;
-			*)
-				# Linux route does cannot work it out ...
-				if [ "$RC_UNAME" = Linux ]; then
-					case "$args" in
-					*:*) family="-A inet6";;
-					*) family=;;
-					esac
-				fi
-				route $famly $xtra $2 -$args
-				;;
-			esac
-			veend $?
-		esac
-	done
-	eoutdent
-	eend 0
-}
-
-start()
-{
-	do_routes "Adding" "add"
-}
-
-stop()
-{
-	local cmd="delete"
-	[ "$RC_UNAME" = Linux ] && cmd="del"
-	do_routes "Deleting" "$cmd"
-}

init.d/swap-blk.in

@@ -5,7 +5,7 @@
 depend()
 {
 	before fsck
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start()

init.d/swap.in

@@ -5,7 +5,7 @@
 depend()
 {
 	need localmount
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword nojail noopenvz noprefix novserver
 }
 
 start()

init.d/swclock.in

@@ -1,28 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-description="Sets the local clock to the mtime of a given file."
-
-depend()
-{
-	before *
-	provide clock
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
-}
-
-# swclock is an OpenRC built in
-
-start()
-{
-	ebegin "Setting the local clock based on last shutdown time"
-	swclock --warn
-	eend $?
-}
-
-stop()
-{
-	ebegin "Saving the shutdown time"
-	swclock --save
-	eend $?
-}

init.d/syscons.in

@@ -4,7 +4,7 @@
 
 depend() {
 	need localmount
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start() {

init.d/sysctl.BSD.in

@@ -4,28 +4,21 @@
 
 depend()
 {
+	use hostname
 	before bootmisc logger
-	keyword -prefix
+	keyword noprefix
 }
 
 start()
 {
 	[ -e /etc/sysctl.conf ] || return 0
-	local retval=0 var= comments= conf=
+	local retval=0 var= comments=
 	ebegin "Configuring kernel parameters"
-	eindent
-	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
 	while read var comments; do
 		case "$var" in
 			""|"#"*) continue;;
 		esac
 		sysctl -w "$var" >/dev/null || retval=1
-			done < "$conf"
+	done < /etc/sysctl.conf
-			veend $retval
-		fi
-	done
-	eoutdent
 	eend $retval "Some errors were encountered"
 }

init.d/sysctl.Linux.in

@@ -4,22 +4,15 @@
 
 depend()
 {
+	use hostname
 	before bootmisc logger
-	keyword -openvz -prefix -vserver
+	keyword noopenvz noprefix novserver
 }
 
 start()
 {
-	local conf= retval=0
+	[ -e /etc/sysctl.conf ] || return 0
 	ebegin "Configuring kernel parameters"
-	eindent
+	sysctl -p >/dev/null
-	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+	eend $? "Some errors were encountered"
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
-			sysctl -p "$conf" >/dev/null
-			veend $? || retval=1
-		fi
-	done
-	eoutdent
-	eend $retval "Some errors were encountered"
 }

init.d/sysfs.in

@@ -6,7 +6,7 @@ description="Mount the sys filesystem."
 
 depend()
 {
-	keyword -prefix -vserver
+	keyword noprefix novserver
 }
 
 mount_sys()

init.d/syslogd.in

@@ -16,5 +16,5 @@ depend()
 	use net newsyslog
 	need localmount
 	after bootmisc
-	keyword -prefix
+	keyword noprefix
 }

init.d/termencoding.in

@@ -9,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword noopenvz noprefix nouml novserver noxenu
 }
 
 start()

init.d/ttys.in

@@ -5,7 +5,7 @@
 depend() 
 {
 	after fsck
-	keyword -prefix
+	keyword noprefix
 }
 
 start()

init.d/urandom.in

@@ -8,7 +8,7 @@ description="Initializes the random number generator."
 depend()
 {
 	need localmount
-	keyword -jail -openvz -prefix
+	keyword nojail noprefix
 }
 
 save_seed()

init.d/wscons.in

@@ -5,7 +5,7 @@
 depend()
 {
 	need localmount
-	keyword -prefix
+	keyword noprefix
 }
 
 start()

man/einfo.3

@@ -39,7 +39,7 @@
 .Nm eprefix
 .Nd colorful informational output
 .Sh LIBRARY
-Enhanced Information output library (libeinfo, -leinfo)
+Enhanced Informatation output library (libeinfo, -leinfo)
 .Sh SYNOPSIS
 .In einfo.h
 .Ft int Fn einfo "const char * restrict format" ...

man/rc-status.8

@@ -36,7 +36,7 @@
 .Nm
 gathers and displays information about the status of services 
 in different runlevels.  The default behavior is to show information 
-about the current runlevel and any unassigned services that are not stopped,
+about the current runlevel and any unassgined services that are not stopped,
 but any runlevel can be quickly examined.
 .Pp
 The options are as follows:

man/rc_find_pids.3

@@ -54,7 +54,7 @@ owned by
 .Fa uid ,
 all of which are optional.
 .Pp
-The returned list should be freed when done.
+The retuned list should be freed when done.
 .Sh IMPLEMENTATION NOTES
 On BSD systems we use
 .Lb libkvm

man/rc_plugin_hook.3

@@ -42,7 +42,7 @@ is set to the hook running, and
 .Fa name
 is set to the name of the runlevel or name of the service.
 .Pp
-Plugins can affect the parent environment by writing NULL separated strings to
+Plugins can affect the parent environemnt by writing NULL separated strings to
 .Va rc_environ_fd .
 .Sh SEE ALSO
 .Xr rc 8 ,

man/runscript.8

@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd November 4, 2009
+.Dd April 30, 2009
 .Dt RUNSCRIPT 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -39,8 +39,8 @@
 .Nm
 is basically an interpreter for shell scripts which provide an easy interface
 to the often complex system commands and daemons.
-When a service runs a command it first loads its multiplexed configuration
+When a service runs a command it first loads it's mulitplexed configuration
-file, then its master configuration file, then
+file, then it's master configuration file, then
 .Pa /etc/rc.conf
 and finally the script itself. At this point
 .Nm
@@ -79,7 +79,7 @@ Ignore all dependency information the service supplies.
 Only run the command if the service has been started.
 .It Fl q , -quiet
 Turns off all informational output the service generates.
-Output from any non OpenRC commands is not affected.
+Output from any non OpenRC comands is not affected.
 .It Fl v , -verbose
 Turns on any extra informational output the service generates.
 .It Fl Z , -dry-run
@@ -90,9 +90,9 @@ or stopping them.
 The following variables affect the service script:
 .Bl -tag -width "RC_DEFAULTLEVEL"
 .It Ar extra_commands
-Space separated list of extra commands the service defines.
+Space seperated list of extra commands the service defines.
 .It Ar extra_started_commands
-Space separated list of extra commands the service defines. These only work if
+Space seperated list of extra commands the service defines. These only work if
 the service has already been started.
 .It Ar description
 String describing the service.
@@ -128,7 +128,7 @@ will refuse to stop until any services that need it have stopped.
 The service will attempt to start any services we use that have been added
 to the runlevel.
 .It Ic after
-The service will start after these services and stop before these services.
+The service will start after thse services and stop before these services.
 .It Ic before
 The service will start before these services and stop after these services.
 .It Ic provide
@@ -138,32 +138,30 @@ We should recalculate our dependencies if the listed files have changed.
 .It Ic keyword
 Tags a service with a keyword. Here's the keywords we currently understand:-
 .Bl -tag -width indent
-.It Dv -jail
+.It Dv nojail
 When in a jail, exclude this service from any dependencies. The service can
 still be run directly.
-.It Dv -openvz
+.It Dv noopenvz
-Same as -jail, but for OpenVZ systems.
+Same as nojail, but for OpenVZ systems.
-.It Dv -lxc
+.It Dv noshutdown
-Same as -jail, but for Linux Resource Containers (LXC).
-.It Dv -shutdown
 Don't stop this service when shutting the system down.
 This normally quite safe as remaining daemons will be sent a SIGTERM just
 before final shutdown.
 Network related services such as the network and dhcpcd init scripts normally
 have this keyword.
-.It Dv -stop
+.It Dv nostop
 Don't stop this service when changing runlevels, even if not present.
 This includes shutting the system down.
-.It Dv -timeout
+.It Dv notimeout
 Do not time out waiting for that service.
-.It Dv -uml
+.It Dv nouml
-Same as -jail, but for UML systems.
+Same as nojail, but for UML systems.
-.It Dv -vserver
+.It Dv novserver
-Same as -jail, but for VServer systems.
+Same as nojail, but for VServer systems.
-.It Dv -xen0
+.It Dv noxen0
-Same as -jail, but for Xen DOM0 systems.
+Same as nojail, but for Xen DOM0 systems.
-.It Dv -xenu
+.It Dv noxenu
-Same as -jail, but for Xen DOMU systems.
+Same as nojail, but for Xen DOMU systems.
 .El
 .El
 .Pp
@@ -225,7 +223,7 @@ is newer than
 return 0, otherwise 1.
 If
 .Ar file2
-is a directory, then check all its contents too.
+is a directory, then check all it's contents too.
 .It Ic is_older_than Ar file1 Ar file2 ...
 If
 .Ar file1
@@ -234,7 +232,7 @@ is newer than
 return 0, otherwise 1.
 If
 .Ar file2
-is a directory, then check all its contents too.
+is a directory, then check all it's contents too.
 .It Ic service_set_value Ar name Ar value
 Saves the
 .Ar name
@@ -320,7 +318,7 @@ Configuration files, relative to the location of the service.
 If a file ending with .${RC_RUNLEVEL} exists then we use that instead.
 .Bl -ohang
 .It Pa ../conf.d/${RC_SVCNAME%%.*}
-multiplexed configuration file.
+mulitplexed configuration file.
 Example: if ${RC_SVCNAME} is net.eth1 then look for
 .Pa ../conf.d/net .
 .It Pa ../conf.d/${RC_SVCNAME}

man/start-stop-daemon.8

@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd December 14, 2009
+.Dd April 22, 2009
 .Dt START-STOP-DAEMON 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -43,7 +43,7 @@
 .Ar daemon
 .Sh DESCRIPTION
 .Nm
-provides a consistent method of starting, stopping and signaling daemons.
+provides a consistent method of starting, stopping and signalling daemons.
 If neither
 .Fl K , -stop
 nor
@@ -85,7 +85,7 @@ then
 .Nm
 matches the process
 .D1 /usr/bin/perl -w foo
-If an interpreted daemon changes its process name then this won't work.
+If an interpreted daemon changes it's process name then this won't work.
 .It Fl u , -user Ar user Ns Op : Ns Ar group
 Start the daemon as the
 .Ar user
@@ -98,8 +98,6 @@ Print the action(s) that would be taken, but don't actually do anything.
 The return value is set as if the command was taken and worked.
 .It Fl v , -verbose
 Print the action(s) that are taken just before doing them.
-.It Fl P , -progress
-Echo a . to the console for each second elapsed whilst waiting.
 .El
 .Pp
 These options are only used for starting daemons:
@@ -136,10 +134,6 @@ option. Only useful when used with daemons that run in the foreground and
 forced into the background with the
 .Fl -b , -background
 option.
-.It Fl I , -ionice Ar class Ns Op : Ns Ar data
-Modifies the IO scheduling priority of the daemon.
-Class can be 0 for none, 1 for real time, 2 for best effort and 3 for idle.
-Data can be from 0 to 7 inclusive.
 .It Fl N , -nice Ar level
 Modifies the scheduling priority of the daemon.
 .It Fl 1 , -stdout Ar logfile
@@ -148,9 +142,9 @@ Redirect the standard output of the process to logfile when started with
 Must be an absolute pathname, but relative to the path optionally given with
 .Fl r , -chroot .
 The logfile can also be a named pipe.
-.It Fl w , -wait Ar milliseconds
+.It Fl w , -wait Ar seconds
 Wait
-.Ar milliseconds
+.Ar seconds
 after starting and check that daemon is still running.
 Useful for daemons that check configuration after forking or stopping race
 conditions where the pidfile is written out after forking.

net/bonding.sh

@@ -15,14 +15,7 @@ _is_bond()
 
 bonding_pre_start()
 {
-	local x= s= n= slaves= primary=
+	local x= s= slaves="$(_get_array "slaves_${IFVAR}")" 
-
-	slaves="$(_get_array "slaves_${IFVAR}")"
-	unset slaves_${IFVAR}
-
-	eval primary="\$primary_${IFVAR}"
-	unset primary_${IFVAR}
-
 
 	[ -z "${slaves}" ] && return 0
 
@@ -46,31 +39,13 @@ bonding_pre_start()
 		return 1
 	fi
 
-	# Interface must be down in order to configure
+	# Configure the bond.
-	_down
+	# Nice and dynamic :)
-
-	# Configure the bond mode, then we can reloop to ensure we configure
-	# All other options
-	for x in /sys/class/net/"${IFACE}"/bonding/mode; do
-		[ -f "${x}" ] || continue
-		n=${x##*/}
-		eval s=\$${n}_${IFVAR}
-		if [ -n "${s}" ]; then
-			einfo "Setting ${n}: ${s}"
-			echo "${s}" >"${x}" || \
-			eerror "Failed to configure $n (${n}_${IFVAR})"
-		fi
-	done
-	# Nice and dynamic for remaining options:)
 	for x in /sys/class/net/"${IFACE}"/bonding/*; do
 		[ -f "${x}" ] || continue
-		n=${x##*/}
+		eval s=\$${x##*/}_${IFVAR}
-		eval s=\$${n}_${IFVAR}
-		[ "${n}" != "mode" ] || continue
 		if [ -n "${s}" ]; then
-			einfo "Setting ${n}: ${s}"
+			echo "${s}" >"${x}"
-			echo "${s}" >"${x}" || \
-			eerror "Failed to configure $n (${n}_${IFVAR})"
 		fi
 	done
 
@@ -97,11 +72,6 @@ bonding_pre_start()
 	# finally add in slaves
 	eoutdent
 	if [ -d /sys/class/net ]; then
-		if [ -n "${primary}" ]; then
-			echo "+${primary}" >/sys/class/net/"${IFACE}"/bonding/slaves
-			echo "${primary}" >/sys/class/net/"${IFACE}"/bonding/primary
-			slaves="${slaves/${primary}/}"
-		fi
 		for s in ${slaves}; do
 			echo "+${s}" >/sys/class/net/"${IFACE}"/bonding/slaves
 		done
@@ -147,12 +117,6 @@ bonding_stop()
 	done
 	)
 
-	_down
-
-	if [ -d /sys/class/net ]; then
-		echo "-${IFACE}" > /sys/class/net/bonding_masters
-	fi
-
 	eend 0
 	return 0
 }

net/bridge.sh

@@ -11,8 +11,7 @@ _config_vars="$_config_vars bridge bridge_add brctl"
 
 _is_bridge()
 {
-	# Ignore header line so as to allow for bridges named 'bridge'
+	brctl show 2>/dev/null | grep -q "^${IFACE}[[:space:]]"
-	brctl show 2>/dev/null | sed '1,1d' | grep -q "^${IFACE}[[:space:]]"
 }
 
 bridge_pre_start()
@@ -89,16 +88,14 @@ bridge_post_stop()
 	if _is_bridge; then
 		ebegin "Destroying bridge ${IFACE}"
 		_down
-		# Ignore header line so as to allow for bridges named 'bridge'
 		ports="$(brctl show 2>/dev/null | \
-			sed -n -e '1,1d' -e '/^'"${IFACE}"'[[:space:]]/,/^\S/ { /^\('"${IFACE}"'[[:space:]]\|\t\)/s/^.*\t//p }')"
+			sed -n -e '/^'"${IFACE}"'[[:space:]]/,/^\S/ { /^\('"${IFACE}"'[[:space:]]\|\t\)/s/^.*\t//p }')"
 		delete=true
 		iface=${IFACE}
 		eindent
 	else
 		# Work out if we're added to a bridge for removal or not
-		# Ignore header line so as to allow for bridges named 'bridge'
+		eval set -- $(brctl show 2>/dev/null | sed -e "s/'/'\\\\''/g" -e "s/$/'/g" -e "s/^/'/g")
-		eval set -- $(brctl show 2>/dev/null | sed -e '1,1d' -e "s/'/'\\\\''/g" -e "s/$/'/g" -e "s/^/'/g")
 		local line=
 		for line; do
 			set -- ${line}

net/dhclient.sh

@@ -17,7 +17,6 @@ dhclient_start()
 
 	# Get our options
 	# These options only work in Gentoo, and maybe RedHat
-	eval args=\$dhclient_${IFVAR}
 	eval opts=\$dhcp_${IFVAR}
 	[ -z "${opts}" ] && opts=${dhcp}
 

net/dhcpcd.sh

@@ -56,11 +56,8 @@ dhcpcd_start()
 		esac
 	done
 
-	# Add our route metric if not given
+	# Add our route metric
-	case " $args " in
+	[ "${metric:-0}" != "0" ] && args="${args} -m ${metric}"
-	*" -m "*) ;;
-	*) [ "${metric:-0}" != 0 ] && args="$args -m $metric";;
-	esac
 
 	# Bring up DHCP for this interface
 	ebegin "Running dhcpcd"

net/ifconfig.sh.Linux.in

@@ -42,8 +42,7 @@ _ifindex()
 _is_wireless()
 {
 	# Support new sysfs layout
-	[ -d /sys/class/net/"${IFACE}"/wireless -o \
+	[ -d /sys/class/net/"${IFACE}"/wireless ] && return 0
-		-d /sys/class/net/"${IFACE}"/phy80211 ] && return 0
 
 	[ ! -e /proc/net/wireless ] && return 1
 	grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless
@@ -262,17 +261,6 @@ _tunnel()
 
 ifconfig_pre_start()
 {
-	local tunnel=
-	eval tunnel=\$iptunnel_${IFVAR}
-	if [ -n "${tunnel}" ]; then
-		# Set our base metric to 1000
-		metric=1000
-		ebegin "Creating tunnel ${IFVAR}"
-		iptunnel add ${tunnel}
-		eend $? || return 1
-		_up
-	fi
-
 	# MTU support
 	local mtu=
 	eval mtu=\$mtu_${IFVAR}
@@ -283,7 +271,17 @@ ifconfig_pre_start()
 	eval len=\$txqueuelen_${IFVAR}
 	[ -n "${len}" ] && ifconfig "${IFACE}" txqueuelen "${len}"
 
-	return 0
+	local tunnel=
+
+	eval tunnel=\$iptunnel_${IFVAR}
+	[ -z "${tunnel}" ] && return 0
+
+	# Set our base metric to 1000
+	metric=1000
+	
+	ebegin "Creating tunnel ${IFVAR}"
+	iptunnel add ${tunnel}
+	eend $?
 }
 
 ifconfig_post_stop()

net/iproute2.sh

@@ -1,18 +1,9 @@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-_ip()
-{
-	if [ -x /bin/ip ]; then
-		echo /bin/ip
-	else
-		echo /sbin/ip
-	fi
-}
-
 iproute2_depend()
 {
-	program $(_ip)
+	program /sbin/ip
 	provide interface
 	after ifconfig
 }
@@ -52,8 +43,7 @@ _ifindex()
 _is_wireless()
 {
 	# Support new sysfs layout
-	[ -d /sys/class/net/"${IFACE}"/wireless -o \
+	[ -d /sys/class/net/"${IFACE}"/wireless ] && return 0
-		-d /sys/class/net/"${IFACE}"/phy80211 ] && return 0
 
 	[ ! -e /proc/net/wireless ] && return 1
 	grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless
@@ -167,11 +157,7 @@ _add_route()
 		shift
 	done
 
-	# We cannot use a metric if we're using a nexthop
+	if ! ${have_metric} && [ -n "${metric}" ]; then
-	if ! ${have_metric} && \
-		[ -n "${metric}" -a \
-			"${cmd##* nexthop }" = "$cmd" ]
-	then
 		cmd="${cmd} metric ${metric}"
 	fi
 
@@ -201,6 +187,16 @@ _tunnel()
 
 iproute2_pre_start()
 {
+	# MTU support
+	local mtu=
+	eval mtu=\$mtu_${IFVAR}
+	[ -n "${mtu}" ] && ip link set "${IFACE}" mtu "${mtu}"
+
+	# TX Queue Length support
+	local len=
+	eval len=\$txqueuelen_${IFVAR}
+	[ -n "${len}" ] && ip link set "${IFACE}" txqueuelen "${len}"
+
 	local tunnel=
 	eval tunnel=\$iptunnel_${IFVAR}
 	if [ -n "${tunnel}" ]; then
@@ -213,16 +209,6 @@ iproute2_pre_start()
 		_up	
 	fi
 
-	# MTU support
-	local mtu=
-	eval mtu=\$mtu_${IFVAR}
-	[ -n "${mtu}" ] && ip link set "${IFACE}" mtu "${mtu}"
-
-	# TX Queue Length support
-	local len=
-	eval len=\$txqueuelen_${IFVAR}
-	[ -n "${len}" ] && ip link set "${IFACE}" txqueuelen "${len}"
-
 	return 0
 }
 
@@ -236,8 +222,6 @@ _iproute2_ipv6_tentative()
 
 iproute2_post_start()
 {
-	local n=5
-
 	# Kernel may not have IP built in
 	if [ -e /proc/net/route ]; then
 		ip route flush table cache dev "${IFACE}"
@@ -245,16 +229,11 @@ iproute2_post_start()
 
 	if _iproute2_ipv6_tentative; then
 		ebegin "Waiting for IPv6 addresses"
-		while [ $n -ge 0 ]; do
+		while true; do
 			_iproute2_ipv6_tentative || break
-			sleep 1
-			n=$(($n - 1))
 		done
-		[ $n -ge 0 ]
+		eend 0
-		eend $?
 	fi
-
-	return 0
 }
 
 iproute2_post_stop()

net/pppd.sh

@@ -90,7 +90,7 @@ pppd_pre_start()
 	eval passwordset=\$\{password_${IFVAR}-x\}
 	if [ -n "${username}" ] \
 	&& [ -n "${password}" -o -z "${passwordset}" ]; then
-		opts="plugin passwordfd.so ${opts} passwordfd 0"
+		opts="${opts} plugin passwordfd.so passwordfd 0"
 	fi
 	
 	if ! ${hasdefaultmetric}; then
@@ -155,7 +155,7 @@ pppd_pre_start()
 			opts="${opts} connect true"
 			set -- "$@" "${link}"
 		fi
-		opts="plugin $1.so ${opts}"
+		opts="${opts} plugin $1.so"
 		shift
 		opts="${opts} $@"
 	done

net/tuntap.sh

@@ -26,7 +26,7 @@ tuntap_pre_start()
 			return 1
 		fi
 		vebegin "Waiting for /dev/net/tun"
-		# /dev/net/tun can take its time to appear
+		# /dev/net/tun can take it's time to appear
 		local timeout=10
 		while [ ! -e /dev/net/tun -a ${timeout} -gt 0 ]; do
 			sleep 1

net/vlan.sh

@@ -20,7 +20,7 @@ _is_vlan()
 _get_vlans()
 {
 	[ -e /proc/net/vlan/config ] || return 1
-	sed -n -e 's/^\W*\([^ ]*\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
+	sed -n -e 's/^\(.*[0-9]\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
 }
 
 _check_vlan()
@@ -87,7 +87,7 @@ vlan_post_start()
 
 		# We need to work out the interface name of our new vlan id
 		local ifname="$(sed -n -e \
-			's/^\([^[:space:]]*\) *| '"${vlan}"' *| .*'"${IFACE}"'$/\1/p' \
+			's/^\([^[:space:]]*\) *| '"${vlan}"' *| .*'"${iface}"'$/\1/p' \
 			/proc/net/vlan/config )"
 		mark_service_started "net.${ifname}"
 		(

pkgconfig/.gitignore

@@ -1,2 +0,0 @@
-einfo.pc
-openrc.pc

pkgconfig/Makefile

@@ -1,12 +0,0 @@
-DIR=	${LIBDIR}/pkgconfig
-SRCS=	einfo.pc.in openrc.pc.in
-INC=	einfo.pc openrc.pc
-
-.DEFAULT:
-	${SED} -n -e 's/^VERSION=[[:space:]]*\([^[:space:]]*\).*/#define VERSION "\1${GITVER}\"/p' ../../Makefile > version.h
-
-SED_EXTRA=	-e 's:@VERSION@:${VERSION}:g'
-
-MK=	../mk
-include ../Makefile.inc
-include ${MK}/scripts.mk

pkgconfig/einfo.pc.in

@@ -1,9 +0,0 @@
-prefix=@PREFIX@
-exec_prefix=${prefix}
-libdir=${prefix}/@LIB@
-includedir=/usr/include
-
-Name: einfo
-Description: Pretty console informational display
-Version: @VERSION@
-Libs: -L${libdir} -leinfo

pkgconfig/openrc.pc.in

@@ -1,10 +0,0 @@
-prefix=@PREFIX@
-exec_prefix=${prefix}
-libdir=${prefix}/@LIB@
-includedir=/usr/include
-
-Name: OpenRC
-Description: Universal init system
-Version: @VERSION@
-Cflags: -I${includedir}
-Libs: -L${libdir} -lrc

runlevels/Makefile

@@ -1,5 +1,5 @@
 BOOT=		bootmisc fsck hostname localmount network \
-		root staticroute swap sysctl urandom
+		root swap sysctl urandom
 DEFAULT=	local netmount
 SHUTDOWN=	savecache
 

scripts/Makefile

@@ -1,5 +0,0 @@
-DIR=	${LIBEXECDIR}/bin
-BIN=	on_ac_power
-
-MK=	../mk
-include ${MK}/scripts.mk

scripts/on_ac_power

@@ -1,37 +0,0 @@
-#!/bin/sh
-# Detect AC power or not in a portable way
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-
-# Exit 0 if on AC power, 1 if not and 255 if we don't know how to work it out
-if [ -f /proc/acpi/ac_adapter/AC*/state ]; then
-	cat /proc/acpi/ac_adapter/AC*/state | while read line; do
-		case "$line" in
-		"state:"*"off-line") exit 128;;
-		esac
-	done
-elif [ -f /sys/class/power_supply/AC*/online ]; then
-	cat /sys/class/power_supply/AC*/online | while read line; do
-		[ "${line}" = 0 ] && exit 128
-	done
-elif [ -f /proc/pmu/info ]; then
-	cat /proc/pmu/info | while read line; do
-		case "$line" in
-		"AC Power"*": 0") exit 128;;
-		esac
-	done
-elif type envstat >/dev/null 2>&1; then
-	# NetBSD has envstat
-	envstat -d acpiacad0 2>/dev/null | while read line; do
-		case "$line" in
-		"connected:"*"OFF") exit 128;;
-		esac
-	done
-elif sysctl -q hw.acpi.acline >/dev/null 2>/dev/null; then
-	case $(sysctl -n hw.acpi.acline) in
-	0) exit 1;;
-	*) exit 0;;
-	esac
-else
-	exit 255
-fi
-[ $? != 128 ]

sh/gendepends.sh.in

@@ -5,7 +5,6 @@
 # All rights reserved. Released under the 2-clause BSD license.
 
 . @SYSCONFDIR@/init.d/functions.sh
-. @LIBEXECDIR@/sh/rc-functions.sh
 
 config() {
 	[ -n "$*" ] && echo "$RC_SVCNAME config $*" >&3
@@ -83,7 +82,24 @@ do
 
 		if . "$_dir/$RC_SVCNAME"; then
 			echo "$RC_SVCNAME" >&3
-			_depend
+			depend
+			_rc_svcname=$(shell_var "$RC_SVCNAME")
+
+			# Add any user defined depends
+			for _deptype in config:CONFIG need:NEED use:USE \
+			after:AFTER before:BEFORE \
+			provide:PROVIDE keyword:KEYWORD; do
+				IFS=:
+				set -- $_deptype
+				unset IFS
+				eval _depends=\$rc_$_rc_svcname_$1
+				[ -z "$_depends" ] && eval _depends=\$rc_$1
+				[ -z "$_depends" ] && \
+					eval _depends=\$RC_$_rc_svcname_$2
+				[ -z "$_depends" ] && eval _depends=\$RC_$2
+
+				$1 ${_depends}
+			done
 		fi
 		)
 	done

sh/init-early.sh.Linux.in

@@ -17,7 +17,7 @@ fi
 if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/consolefont \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/consolefont ]; then
 	printf "\033%s" "$termencoding" >"$CONSOLE" 2>/dev/null
-	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /usr/bin/setfont ]; then
+	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /bin/setfont ]; then
 		font="$(cat "$RC_LIBEXECDIR"/console/font)"
 		[ -c "$CONSOLE" ] && cons="-C $CONSOLE"
 		setfont $cons "$RC_LIBEXECDIR"/console/"$font" 2>/dev/null
@@ -29,7 +29,7 @@ if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/keymaps \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/keymaps ]; then
 	kbd_mode $kmode -C "$CONSOLE" 2>/dev/null
 	if [ -r "$RC_LIBEXECDIR"/console/keymap ]; then
-		loadkeys -q "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
+		loadkeys "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
 	fi
 fi
 

sh/init.sh.Linux.in

@@ -8,19 +8,14 @@
 # tmpfs and ramfs are easy, so force one or the other.
 mount_svcdir()
 {
-	# mount from fstab if we can
-	fstabinfo --mount "$RC_SVCDIR" && return 0
-
 	local fs= fsopts="-o rw,noexec,nodev,nosuid"
+	local devdir="rc-svcdir" x=
 	local svcsize=${rc_svcsize:-1024}
 
-	# Some buggy kernels report tmpfs even when not present :(
 	if grep -Eq "[[:space:]]+tmpfs$" /proc/filesystems; then
-		mount -n -t tmpfs $fsopts,mode=755,size=${svcsize}k \
+		fs="tmpfs"
-			rc-svcdir "$RC_SVCDIR" && return 0
+		fsopts="$fsopts,mode=0755,size=${svcsize}k"
-	fi
+	elif grep -Eq "[[:space:]]+ramfs$" /proc/filesystems; then
-	
-	if grep -Eq "[[:space:]]+ramfs$" /proc/filesystems; then
 		fs="ramfs"
 		# ramfs has no special options
 	elif [ -e /dev/ram0 ] \
@@ -37,7 +32,10 @@ mount_svcdir()
 		return 1
 	fi
 
-	mount -n -t "$fs" $fsopts rc-svcdir "$RC_SVCDIR"
+	# If we have no entry in fstab for $RC_SVCDIR, provide our own
+	if ! fstabinfo --mount "$RC_SVCDIR"; then
+		mount -n -t "$fs" $fsopts "$devdir" "$RC_SVCDIR"
+	fi
 }
 
 . "$RC_LIBEXECDIR"/sh/functions.sh
@@ -70,14 +68,4 @@ if $mountproc; then
 	eend $?
 fi
 
-# Try to mount xenfs as early as possible, otherwise rc_sys() will always
-# return RC_SYS_XENU and will think that we are in a domU while it's not.
-if grep -Eq "[[:space:]]+xenfs$" /proc/filesystems; then
-	ebegin "Mounting xenfs"
-	if ! fstabinfo --mount /proc/xen; then
-		mount -n -t xenfs xenfs /proc/xen -o nosuid,nodev,noexec
-	fi
-	eend $?
-fi
-
 . "$RC_LIBEXECDIR"/sh/init-common-post.sh

sh/rc-functions.sh.in

@@ -38,8 +38,7 @@ stop_addon()
 	( import_addon "$1-stop" )
 }
 
-net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre
+net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
-ncpfs nfs nfs4 ocfs2 shfs smbfs $extra_net_fs_list"
 is_net_fs()
 {
 	[ -z "$1" ] && return 1
@@ -85,27 +84,6 @@ get_bootparam()
 	return 1
 }
 
-# Called from runscript.sh or gendepends.sh
-_depend() {
-	depend
-	local _rc_svcname=$(shell_var "$RC_SVCNAME") _deptype= _depends=
-
-	# Add any user defined depends
-	for _deptype in config:CONFIG need:NEED use:USE \
-	after:AFTER before:BEFORE \
-	provide:PROVIDE keyword:KEYWORD; do
-		IFS=:
-		set -- $_deptype
-		unset IFS
-		eval _depends=\$rc_${_rc_svcname}_$1
-		[ -z "$_depends" ] && eval _depends=\$rc_$1
-		[ -z "$_depends" ] && eval _depends=\$RC_${_rc_svcname}_$2
-		[ -z "$_depends" ] && eval _depends=\$RC_$2
-
-		$1 $_depends
-	done
-}
-
 # Add our sbin to $PATH
 case "$PATH" in
 	"$RC_LIBEXECDIR"/sbin|"$RC_LIBEXECDIR"/sbin:*);;

sh/rc-mount.sh

@@ -26,8 +26,6 @@ do_unmount()
 		# Unmounting a shared mount can unmount other mounts, so
 		# we need to check the mount is still valid
 		mountinfo --quiet "$mnt" || continue
-		# Ensure we interpret all characters properly.
-		mnt=$(printf "$mnt")
 
 		case "$cmd" in
 			umount)
@@ -38,7 +36,7 @@ do_unmount()
 				;;
 		esac
 
-		retry=4 # Effectively TERM, sleep 1, TERM, sleep 1, KILL, sleep 1
+		retry=3
 		while ! LC_ALL=C $cmd "$mnt" 2>/dev/null; do
 			if type fuser >/dev/null 2>&1; then
 				pids="$(fuser $f_opts "$mnt" 2>/dev/null)"
@@ -55,16 +53,13 @@ do_unmount()
 					eend 1 "in use but fuser finds nothing"
 					retry=0;;
 				*)
-					if [ $retry -le 0 ]; then
+					local sig="KILL"
-						eend 1
+					[ $retry -gt 0 ] && sig="TERM"
-					else
-						local sig="TERM"
-						retry=$(($retry - 1))
-						[ $retry = 1 ] && sig="KILL"
 					fuser $f_kill$sig -k $f_opts \
 						"$mnt" >/dev/null 2>&1
 					sleep 1
-					fi
+					retry=$(($retry - 1))
+					[ $retry -le 0 ] && eend 1
 					;;
 			esac
 			[ $retry -le 0 ] && break

sh/runscript.sh.in

@@ -25,29 +25,6 @@ shift
 # Compat
 export SVCNAME=$RC_SVCNAME
 
-# Dependency function
-config() {
-	[ -n "$*" ] && echo "config $*"
-}
-need() {
-	[ -n "$*" ] && echo "need $*"
-}
-use() {
-	[ -n "$*" ] && echo "use $*"
-}
-before() {
-	[ -n "$*" ] && echo "before $*"
-}
-after() {
-	[ -n "$*" ] && echo "after $*"
-}
-provide() {
-	[ -n "$*" ] && echo "provide $*"
-}
-keyword() {
-	[ -n "$*" ] && echo "keyword $*"
-}
-
 # Descript the init script to the user
 describe()
 {
@@ -187,12 +164,6 @@ done
 unset _f
 
 while [ -n "$1" ]; do
-	# Sepcial case depend
-	if [ "$1" = depend ]; then
-		shift
-		_depend
-		continue
-	fi
 	# See if we have the required function and run it
 	for _cmd in describe start stop status ${extra_commands:-$opts} \
 		$extra_started_commands

src/includes/rc-misc.h

@@ -35,7 +35,6 @@
 #include <sys/stat.h>
 #include <errno.h>
 #include <stdbool.h>
-#include <stdlib.h>
 #include <string.h>
 
 #define RC_LEVEL_BOOT           "boot"

src/libeinfo/libeinfo.c

@@ -643,7 +643,7 @@ static int EINFO_PRINTF(3, 0)
 		fprintf(f, "\n");
 	if (_eprefix)
 		fprintf(f, "%s%s%s|", _ecolor(f, color), _eprefix, _ecolor(f, ECOLOR_NORMAL));
-	fprintf(f, " %s*%s ", _ecolor(f, color), _ecolor(f, ECOLOR_NORMAL));
+	fprintf(f, "%s*%s ", _ecolor(f, color), _ecolor(f, ECOLOR_NORMAL));
 	retval += _eindent(f);
 	va_copy(ap, va);
 	retval += vfprintf(f, fmt, ap) + 3;
@@ -800,7 +800,7 @@ ebegin(const char *EINFO_RESTRICT fmt, ...)
 	va_start(ap, fmt);
 	retval = _einfovn(fmt, ap);
 	va_end(ap);
-	retval += printf(" ...");
+	retval += printf("...");
 	if (colour_terminal(stdout))
 		retval += printf("\n");
 	LASTCMD("ebegin");
@@ -817,7 +817,7 @@ _eend(FILE * EINFO_RESTRICT fp, int col, ECOLOR color, const char *msg)
 	if (!msg)
 		return;
 
-	cols = get_term_columns(fp) - (strlen(msg) + 5);
+	cols = get_term_columns(fp) - (strlen(msg) + 3);
 
 	/* cons25 is special - we need to remove one char, otherwise things
 	 * do not align properly at all. */
@@ -831,15 +831,18 @@ _eend(FILE * EINFO_RESTRICT fp, int col, ECOLOR color, const char *msg)
 	if (term_is_cons25)
 		cols--;
 
+	/* If extra spacing is required around msg, then please change
+	 * via a runtime knob and leave this default as is as it saves 2 
+	 * valuable columns when running on 80 column screens. */
 	if (cols > 0 && colour_terminal(fp)) {
-		fprintf(fp, "%s%s %s[%s %s %s]%s\n", up, tgoto(goto_column, 0, cols),
+		fprintf(fp, "%s%s %s[%s%s%s]%s\n", up, tgoto(goto_column, 0, cols),
 		    ecolor(ECOLOR_BRACKET), ecolor(color), msg,
 		    ecolor(ECOLOR_BRACKET), ecolor(ECOLOR_NORMAL));
 	} else {
 		if (col > 0)
 			for (i = 0; i < cols - col; i++)
 				fprintf(fp, " ");
-		fprintf(fp, " [ %s ]\n", msg);
+		fprintf(fp, " [%s]\n", msg);
 	}
 }
 
@@ -1027,7 +1030,7 @@ ebeginv(const char *EINFO_RESTRICT fmt, ...)
 
 	va_start(ap, fmt);
 	retval = _einfovn(fmt, ap);
-	retval += printf(" ...");
+	retval += printf("...");
 	if (colour_terminal(stdout))
 		retval += printf("\n");
 	va_end(ap);

src/librc/librc-depend.c

@@ -346,9 +346,8 @@ get_provided(const RC_DEPINFO *depinfo, const char *runlevel, int options)
 	    get_provided1(runlevel, providers, dt, bootlevel, false, RC_SERVICE_STOPPED))
 		return providers;
 
-	/* Still nothing? OK, list our first provided service. */
+	/* Still nothing? OK, list all services */
-	service = TAILQ_FIRST(dt->services);
+	TAILQ_FOREACH(service, dt->services, entries)
-	if (service != NULL)
 		rc_stringlist_add(providers, service->value);
 
 	return providers;
@@ -739,7 +738,7 @@ rc_deptree_update(void)
 	RC_STRING *s, *s2, *s2_np, *s3, *s4;
 	char *line = NULL;
 	size_t len = 0;
-	char *depend, *depends, *service, *type, *nosys, *onosys;
+	char *depend, *depends, *service, *type, *nosys;
 	size_t i, k, l;
 	bool retval = true;
 	const char *sys = rc_sys();
@@ -803,11 +802,6 @@ rc_deptree_update(void)
 				continue;
 			}
 
-			/* Don't provide ourself */
-			if (strcmp(type, "iprovide") == 0 &&
-			    strcmp(depend, service) == 0)
-				continue;
-
 			/* .sh files are not init scripts */
 			l = strlen(depend);
 			if (l > 2 &&
@@ -847,25 +841,17 @@ rc_deptree_update(void)
 	 * work for them. This doesn't stop them from being run directly. */
 	if (sys) {
 		len = strlen(sys);
-		nosys = xmalloc(len + 1);
+		nosys = xmalloc(len + 3);
-		nosys[0] = '-';
+		nosys[0] = 'n';
+		nosys[1] = 'o';
 		for (i = 0; i < len; i++)
-			nosys[i + 1] = (char)tolower((unsigned char)sys[i]);
+			nosys[i + 2] = (char)tolower((unsigned char)sys[i]);
-		nosys[i + 1] = '\0';
+		nosys[i + 2] = '\0';
-
-		onosys = xmalloc(len + 3);
-		onosys[0] = 'n';
-		onosys[1] = 'o';
-		for (i = 0; i < len; i++)
-			onosys[i + 2] = (char)tolower((unsigned char)sys[i]);
-		onosys[i + 2] = '\0';
 
 		TAILQ_FOREACH_SAFE(depinfo, deptree, entries, depinfo_np)
 			if ((deptype = get_deptype(depinfo, "keyword")))
 				TAILQ_FOREACH(s, deptype->services, entries)
-					if (strcmp(s->value, nosys) == 0 ||
+					if (strcmp(s->value, nosys) == 0) {
-					    strcmp(s->value, onosys) == 0)
-					{
 						provide = get_deptype(depinfo, "iprovide");
 						TAILQ_REMOVE(deptree, depinfo, entries);
 						TAILQ_FOREACH(di, deptree, entries) {
@@ -884,7 +870,6 @@ rc_deptree_update(void)
 						}
 					}
 		free(nosys);
-		free(onosys);
 	}
 
 	/* Phase 3 - add our providers to the tree */