Bump version.

The location of the ifconfig binary has changed in
net-tools-1.60_p20120127084908, and if we do not check both locations
for it, the user will get errors like:
_is_wireless: command not found
_exists: command not found

X-Gentoo-Bug: 407757
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=407757

.gitignore

@@ -1 +1,16 @@
 *.bz2
+
+*.diff
+*.patch
+*.orig
+*.rej
+
+core
+.gdb_history
+.gdbinit
+
+.depend
+*.a
+*.o
+*.So
+lib*.so

FEATURE-REMOVAL-SCHEDULE

@@ -5,27 +5,6 @@ removed, it should also be removed from this file.
 
 ---------------------------
 
-What: rc_sys automatic detection code
-      - Functions for removal: rc_sys_v1, rc_sys_v2
-
-When: 2011/03/01
-
-Why: The original automatic sub-system detection is flawed in that it cannot
-	 safely detect some variables (Using cgroups confused it to think you were
-	 using LXC, and Prefix cannot be detect by definition). Also, almost all of
-	 the detection requires that /proc is available and readable. During early
-	 boot, /proc may not be mounted yet, leading to mis-detection. The readable
-	 condition can also fail under some hardened kernels when running as an
-	 unprivileged user.
-
-	 The new rc_sys_v2 function uses the rc_sys variable from rc.conf. After
-	 the removal, the contents of the rc_sys_v2 function will move into the
-	 rc_sys function.
-
-Who:  Robin H. Johnson <robbat2@gentoo.org>
-
----------------------------
-
 What: oldnet ADSL rp-pppoe mode
 
 When: undecided

Makefile

@@ -1,15 +1,10 @@
 # OpenRC Makefile
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 include Makefile.inc
 
-SUBDIR=		conf.d etc init.d local.d man scripts sh src
+SUBDIR=		conf.d doc etc init.d local.d sysctl.d man net scripts sh src
-
-# Build our old net foo or not
-ifeq (${MKOLDNET},yes)
-SUBDIR+=	net doc
-endif
 
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.8.2
+VERSION=	0.9.9.3
 PKG=		${NAME}-${VERSION}

README

@@ -12,11 +12,10 @@ LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
 MKPAM=pam
 MKPKGCONFIG=no
-MKRCSYS=prefix
 MKSELINUX=yes
+MKSTATICLIBS=no
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
-MKOLDNET=yes
 PKG_PREFIX=/usr/pkg
 LOCAL_PREFIX=/usr/local
 PREFIX=/usr/local
@@ -34,20 +33,6 @@ LOCAL_PREFIX should be set when to where user maintained packages are.
 Only set LOCAL_PREFIX if different from PKG_PREFIX.
 PREFIX should be set when OpenRC is not installed to /.
 
-MKRCSYS should be set only if you need to specify a default system
-subtype. The subtype should be set to match the type of environment the
-file is installed into, not the virtualization the environment is
-capable of handling. Here is a list of subtypes and their meanings.
-
-jail	FreeBSD jail
-lxc	Linux container
-openvz	Linux OpenVZ
-prefix	Linux and *BSD prefix system
-uml	UsermodeLinux
-vserver	Linux vserver
-xen0 Linux and NetBSD xen0 Domain
-xenU Linux and NetBSD xenU Domain
-
 If any of the following files exist then we do not overwrite them
 /etc/devd.conf
 /etc/rc
@@ -70,9 +55,11 @@ of the system.
 
 Reporting Bugs
 --------------
-Bugs should go to the Gentoo Bugzilla:
+Since Gentoo Linux is hosting OpenRC development, Bugs should go to
+the Gentoo Bugzilla:
 	http://bugs.gentoo.org/
-You'll want the "Gentoo Linux" product and the "baselayout" component.
+They should be filed under the "Gentoo Hosted Projects" product and
+the "openrc" component.
 
 
 History - by Roy Marples

README.newnet

@@ -1,40 +0,0 @@
-The following applies only to the newnet stack, which is not presently
-maintained in OpenRC. The oldnet stack is maintained instead.
-- Robin H. Johnson <robbat2@gentoo.org>, 2011/02/21
-
-OpenRC Network Ideals
----------------------
-
-The new style networking for OpenRC is very simplistic - provide a basic means
-of configuring static interface address and routes whilst allowing the
-possibility to run any command at any point.
-
-In a nutshell, init.d/network is a wrapper around ifconfig(8) and
-init.d/staticroute is wrapper around route(8).
-
-In the Perfect World (TM) ifconfig should be able to configure everything
-about the interface easily * . The BSD family almost get this right and Linux
-epically fails.
-
-* Only static configuration, including link setup.
-For dynamic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
-provides your needs.
-
-It fails because there are many tools to do the same job and often have
-vastly different syntax where they could be similar. In other words, there
-is no coherence.
-
-OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
-for each tool and allowed a script per interface. Over the years, this design
-has proven very hard to maintain as each user has their own idea of how
-things should work. Also, there were (and still are) race conditions.
-
-So where do we go from here?
-Well, it's possible to use the new network scripts using the tools
-currently available. It's just harder as you have to know them and their
-documentation can be lacking at times.
-The correct end goal is a BSD style ifconfig tool.
-I've started work on it, but the project has stalled somewhat.
-It's display only right now and the source is not yet publicly available.
-If you have the skills and share the vision then contact me privately and
-we'll take it from there.

STYLE

@@ -32,3 +32,54 @@ void foo(int c)
 
 	return ret;
 }
+
+##################
+# COMMIT MESSAGES #
+##################
+
+The following is an example of a correctly formatted git commit message
+for this repository. Most of this information came from this blog post
+[1], so I would like to thank the author.
+
+### cut here ###
+Capitalized, short (50 chars or less) summary
+
+More detailed explanatory text, if necessary.  Wrap it to about 72
+characters or so.  In some contexts, the first line is treated as the
+subject of an email and the rest of the text as the body.  The blank
+line separating the summary from the body is critical (unless you omit
+the body entirely); tools like rebase can get confused if you run the
+two together.
+
+Write your commit message in the present tense: "Fix bug" and not "Fixed
+bug."  This convention matches up with commit messages generated by
+commands like git merge and git revert.
+
+Further paragraphs come after blank lines.
+
+- Bullet points are okay, too
+
+- Typically a hyphen or asterisk is used for the bullet, preceded by a
+  single space, with blank lines in between, but conventions vary here
+
+- Use a hanging indent
+
+Reported-by: User Name <email>
+X-[Distro]-Bug: BugID
+X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
+### cut here ###
+
+If you did not write the code and the patch does not include authorship
+information in a format git can use, please use the --author option of the
+git commit command to make the authorship correct.
+
+The Reported-by tag is required if the person who reported the bug is
+different from the author and committer.
+
+  The X-[Distro]-Bug/Bug-URL tags are required if this commit is related
+  to a bug reported to us by a specific distribution   of linux or a
+  *BSD. Also, [Distro] should be replaced with the name of the
+  distribution, e.g. X-Gentoo-Bug.
+
+[1] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
+

TODO

@@ -1,7 +1,21 @@
-- ensure all forks block, restore and unblock signals. needs review 
+- ensure all forks block, restore and unblock signals. needs review
 
 - add support somehow for optional translations
 
 - oldnet[bridging]: Review setting of bridge configuration on dynamic interface add
 
 - Document rc-depend binary.
+
+- _ifindex is not a reliable means of calculating metrics:
+	_ifindex is used for calculating metrics for new devices but has a major
+	problem: Since it's only the nth entry in /proc/net/dev
+	And devices may be removed from that file, and reordered, you won't always
+	get the same result.
+	If you do:
+	- add eth0 - _ifindex (eth0=0)
+	- add vlan1 - _ifindex (eth0=0,vlan1=1)
+	- add vlan2 - _ifindex (eth0=0,vlan1=1,vlan2=2)
+	- rem vlan1 - _ifindex (eth0=0,vlan2=1)
+	- add vlan3 - _ifindex (eth0=0,vlan2=1,vlan3=2)
+	Now your routing table has entries for both vlan2 and vlan3 with a metric of 2.
+

conf.d/Makefile

@@ -1,19 +1,23 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount network staticroute urandom
+CONF=	bootmisc fsck hostname localmount network staticroute urandom \
+	${CONF-${OS}}
 
 TARGETS+=	network staticroute
 CLEANFILES+=	network staticroute
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
+
+CONF-Linux=	consolefont dmesg hwclock keymaps killprocs modules
+
+CONF-NetBSD=	moused rarpd savecore
+
 include ${MK}/scripts.mk
 
-SOS?=	BSD
+network: network.in network${SFX}
+	cat $^ > $@
 
-network: network.in network.${SOS}
+staticroute: staticroute${SFX}
-	cp $@.in $@
+	cp $@${SFX} $@
-	[ -e $@.${SOS} ] && cat $@.${SOS} >> $@ || true
-
-staticroute: staticroute.${SOS}
-	cp $@.${SOS} $@

conf.d/Makefile.FreeBSD

@@ -1 +0,0 @@
-CONF+=	ipfw moused powerd rarpd savecore syscons

conf.d/Makefile.Linux

@@ -1,2 +0,0 @@
-CONF+=	consolefont dmesg hwclock keymaps modules
-SOS=	Linux

conf.d/Makefile.NetBSD

@@ -1 +0,0 @@
-CONF+=	moused rarpd savecore

conf.d/adjkerntz

@@ -1,10 +1,10 @@
 # Set CLOCK to "UTC" if your system clock is set to UTC (also known as
-# Greenwich Mean Time).  If your clock is set to the local time, then 
+# Greenwich Mean Time).  If your clock is set to the local time, then
-# set CLOCK to "local".  Note that if you dual boot with Windows, then 
+# set CLOCK to "local".  Note that if you dual boot with Windows, then
 # you should set it to "local".
 clock="UTC"
 
-# If you want to set the Hardware Clock to the current System Time 
+# If you want to set the Hardware Clock to the current System Time
 # during shutdown, then say "YES" here.
 # You normally don't need to do this if you run a ntp daemon.
 clock_systohc="NO"

conf.d/bootmisc

@@ -4,3 +4,7 @@ clean_tmp_dirs="/tmp"
 # Should we wipe the tmp paths completely or just selectively remove known
 # locks / files / etc... ?
 wipe_tmp="YES"
+
+# Write the initial dmesg log into /var/log/dmesg after boot
+# This may be useful if you need the kernel boot log afterwards
+log_dmesg="YES"

conf.d/consolefont

@@ -3,7 +3,7 @@
 # you shouldn't specify the trailing ".psf.gz", just the font name below.
 # To use the default console font, comment out the CONSOLEFONT setting below.
 # This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
-# not want to use it, run "rc-update del consolefont" as root).
+# not want to use it, run "rc-update del consolefont boot" as root).
 consolefont="default8x16"
 
 # consoletranslation is the charset map file to use.  Leave commented to use

conf.d/fsck

@@ -13,6 +13,13 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
+# If passno is not enough granularity, you can also specify mountpoints to
+# check. This should NOT be used for the default non-multiplexed fsck, or your
+# system might not be checked. Additionally, it is mutually exclusive with
+# the fsck_passno setting.
+#fsck_mnt=""
+#fsck_mnt="/home"
+
 # Most modern fs's don't require a full fsck on boot, but for those that do
 # it may be advisable to skip this when running on battery.
 # WARNING: Do not turn this off if you have any JFS partitions.

conf.d/hwclock

@@ -1,22 +1,20 @@
 # Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
-# Greenwich Mean Time).  If that clock is set to the local time, then 
+# Greenwich Mean Time).  If that clock is set to the local time, then
-# set CLOCK to "local".  Note that if you dual boot with Windows, then 
+# set CLOCK to "local".  Note that if you dual boot with Windows, then
 # you should set it to "local".
 clock="UTC"
 
-# If you want to set the Hardware Clock to the current System Time 
+# If you want the hwclock script to set the system time (software clock)
-# (software clock) during shutdown, then say "YES" here.
+# to match the current hardware clock during bootup, leave this
-# You normally don't need to do this if you run a ntp daemon.
+# commented out.
-clock_systohc="NO"
+# However, you can set this to "NO" ifyou are running a modern kernel
+# with CONFIG_RTC_HCTOSYS set to y and your hardware clock set to UTC.
+#clock_hctosys="YES"
+
+# If you do not want to set the hardware clock to the current system
+# time (software clock) during shutdown, set this to no.
+#clock_systohc="YES"
 
-# If you want to set the system time to the current hardware clock
-# during bootup, then say "YES" here. You do not need this if you are
-# running a modern kernel with CONFIG_RTC_HCTOSYS set to y.
-# Also, be aware that if you set this to "NO", the system time will
-# never be saved to the hardware clock unless you set
-# clock_systohc="YES" above.
-clock_hctosys="YES"
- 
 # If you wish to pass any other arguments to hwclock during bootup,
 # you may do so here. Alpha users may wish to use --arc or --srm here.
 clock_args=""

conf.d/keymaps

@@ -1,4 +1,4 @@
-# Use KEYMAP to specify the default console keymap.  There is a complete tree
+# Use keymap to specify the default console keymap.  There is a complete tree
 # of keymaps in /usr/share/keymaps to choose from.
 keymap="us"
 
@@ -12,7 +12,7 @@ windowkeys="NO"
 extended_keymaps=""
 #extended_keymaps="backspace keypad euro2"
 
-# Tell dumpkeys(1) to interpret character action codes to be 
+# Tell dumpkeys(1) to interpret character action codes to be
 # from the specified character set.
 # This only matters if you set unicode="yes" in /etc/rc.conf.
 # For a list of valid sets, run `dumpkeys --help`

conf.d/killprocs

@@ -0,0 +1,3 @@
+# If you wish to pass any options to killall5 during shutdown,
+# you should do so here.
+killall5_opts=""

conf.d/modules

@@ -1,8 +1,10 @@
 # You can define a list modules for a specific kernel version,
 # a released kernel version, a main kernel version or just a list.
+# The most specific versioned variable will take precedence.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
+#modules_2="ipv6"
 #modules="ohci1394"
 
 # You can give modules a different name when they load - the new name
@@ -10,10 +12,12 @@
 #modules="dummy:dummy1"
 
 # Give the modules some arguments if needed, per version if necessary.
+# Again, the most specific versioned variable will take precedence.
 #module_ieee1394_args="debug"
-#module_ieee1394_args_2_6_23_gentoo_r5="ieee1394 ohci1394"
+#module_ieee1394_args_2_6_23_gentoo_r5="debug2"
-#module_ieee1394_args_2_6_23="tun ieee1394"
+#module_ieee1394_args_2_6_23="debug3"
-#module_ieee1394_args_2_6="tun"
+#module_ieee1394_args_2_6="debug4"
+#module_ieee1394_args_2="debug5"
 
 # You should consult your kernel documentation and configuration
 # for a list of modules and their options.

conf.d/moused

@@ -11,6 +11,6 @@
 
 # You can also multiplex the init script for each device like so
 #   ln -s moused /etc/init.d/moused.ums0
-# This enables you to have a config file per mouse (forces moused_device 
+# This enables you to have a config file per mouse (forces moused_device
 # to ums0 in this case) and control each mouse.
 # devd can also start and stop these mice, which laptop users will find handy.

conf.d/net

@@ -1,4 +1,4 @@
 # This blank configuration will automatically use DHCP for any net.*
 # scripts in /etc/init.d.  To create a more complete configuration,
-# please review /usr/share/doc/openrc/net.example and save your configuration
+# please review /usr/share/doc/openrc*/net.example* and save your configuration
 # in /etc/conf.d/net (this file :]!).

conf.d/urandom

@@ -2,4 +2,4 @@
 # (say for crypt swap), so you will need to customize this
 # behavior.  If you have /var on a separate partition, then
 # make sure this path lives on your root device somewhere.
-urandom_seed="/var/run/random-seed"
+urandom_seed="/var/lib/misc/random-seed"

doc/Makefile

@@ -1,7 +1,11 @@
 DIR=	${DOCDIR}/openrc
+SRCS=	net.example.in
 INC=	net.example
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+%.example.in: %.example${SFX}
+	${CP} $< $@
+
 include ${MK}/scripts.mk

doc/Makefile.FreeBSD

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	${CP} $< $@

doc/Makefile.Linux

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.Linux.in
-.Linux.in:
-	${CP} $< $@

doc/Makefile.NetBSD

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	${CP} $< $@

doc/net.example.BSD.in

@@ -388,6 +388,17 @@
 #
 # ${IFACE} is set to the interface being brought up/down
 # ${IFVAR} is ${IFACE} converted to variable name bash allows
+#
+# For historical and compatibility reasons, preup is actually normally called
+# in the following sequence: up ; preup ; up.
+# The first up causes the kernel to initialize the device, so
+# that it is available for use in the preup function.  However, for some
+# hardware, e.g. CAN devices, some configuration is needed before trying to up
+# the interface will actually work. For such hardware, the
+# up_before_preup variables will allow skipping the first up call if set
+# to yes.
+#up_before_preup_IFVAR="NO"
+#up_before_preup="NO"
 
 #preup() {
 #	# Remember to return 0 on success

doc/net.example.Linux.in

@@ -68,6 +68,7 @@
 # NOTE: ifconfig creates an aliased device for each extra IPv4 address
 #       (eth0:1, eth0:2, etc)
 #       iproute2 does not do this as there is no need to
+# WARNING: You cannot mix multiple addresses on a line with other parameters!
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
 # However, that only works with CIDR addresses, so you can't use netmask.
 
@@ -85,6 +86,14 @@
 # If you don't want ANY address (only useful when calling for advanced stuff)
 #config_eth0="null"
 
+# If you need to pass parameters to go with an address, you can do so on the
+# same line as the address. You should split multiple addresses with newlines.
+# WARNING: You cannot mix multiple addresses on a line with other parameters!
+#config_eth0="192.168.0.2/24 scope host"
+#config_eth0="4321:0:1:2:3:4:567:89ab/64 nodad home preferred_lft 0"
+#config_eth0="192.168.0.2/24 scope host
+#4321:0:1:2:3:4:567:89ab/64 nodad home preferred_lft 0"
+
 # Here's how to do routing if you need it
 # We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route
 #routes_eth0="default via 192.168.0.1
@@ -350,7 +359,7 @@
 # By default we don't wait for wpa_supplicant to associate and authenticate.
 # If you need to change this behaviour then you don't know how our scripts work
 # and setting this value could cause strange things to happen.
-# If you would like to, so can specify how long in seconds.
+# If you would like it to wait, you can specify how long in seconds.
 #associate_timeout_eth0=60
 # A value of 0 means wait forever.
 
@@ -414,7 +423,7 @@
 # dhclient: emerge net-misc/dhcp
 # dhcpcd:   emerge net-misc/dhcpcd
 # pump:     emerge net-misc/pump
-# udhcpc:   emerge net-misc/udhcp
+# udhcpc:   emerge sys-apps/busybox
 
 # If you have more than one DHCP client installed, you need to specify which
 # one to use - otherwise we default to dhcpcd if available.
@@ -577,10 +586,27 @@
 #vlan_start_eth0="no"
 
 # If you do the above then you may want to depend on eth0 like so
-# rc_need_vlan1="net.eth0"
+# rc_net_vlan1_need="net.eth0"
 # NOTE: depend functions only work in /etc/conf.d/net
 # and not in profile configs such as /etc/conf.d/net.foo
 
+# Also, you might want to make eth0 not provide net in this case so that
+# dependent services will start when the vlan is active instead of the
+# physical interface.
+# rc_net_eth0_provide="!net"
+
+# MAC-VLAN support
+# The following configuration can be used to create a new interface 'macvlan0'
+# linked to 'eth0'
+#macvlan_macvlan0="eth0"
+
+# MAC-VLAN mode (private, vepa, bridge, passtru)
+#mode_macvlan0="private"
+
+# IP address, MAC address, ... are configured as a normal interface
+#config_macvlan0="192.168.20.20/24"
+#mac_macvlan0="00:50:06:20:20:20"
+
 #-----------------------------------------------------------------------------
 # Bonding
 # For link bonding/trunking on 2.4 kernels, or kernels without sysfs
@@ -597,7 +623,7 @@
 
 # If any of the slaves require extra configuration - for example wireless or
 # ppp devices - we need to depend function on the bonded interfaces
-#rc_need_bond0="net.eth0 net.eth1"
+#rc_net_bond0_need="net.eth0 net.eth1"
 
 
 #-----------------------------------------------------------------------------
@@ -714,7 +740,7 @@
 # If the link require extra configuration - for example wireless or
 # RFC 268 bridge - we need to depend on the bridge so they get
 # configured correctly.
-#rc_need_ppp0="net.nas0"
+#rc_net_ppp0_need="net.nas0"
 
 #WARNING: if MTU of the PPP interface is less than 1500 and you use this
 #machine as a router, you should add the following rule to your firewall
@@ -778,7 +804,7 @@
 
 #-----------------------------------------------------------------------------
 # TUN/TAP
-# For TUN/TAP support emerge net-misc/openvpn or sys-apps/usermode-utilities
+# For TUN/TAP support install iproute2, openvpn or usermode-utilities
 #
 # You must specify if we're a tun or tap device. Then you can give it any
 # name you like - such as vpn
@@ -789,6 +815,9 @@
 #tuntap_tap0="tap"
 #config_tap0="192.168.0.1/24"
 
+# Use something like this to pass custom options to iproute2 during
+# tunnel creation. This sets the user and group ownership of the node.
+#iproute2_tun1="user foo group bar"
 # For passing custom options to tunctl use something like the following.  This
 # example sets the owner to adm
 #tunctl_tun1="-u adm"
@@ -823,13 +852,13 @@
 
 # If any of the ports require extra configuration - for example wireless or
 # ppp devices - we need to depend on them like so.
-#rc_need_br0="net.eth0 net.eth1"
+#rc_net_br0_need="net.eth0 net.eth1"
 
 # Below is an example of configuring the bridge
 # Consult "man brctl" for more details
-#brctl_br0="setfd 0
+#brctl_br0="setfd 15
-#sethello 0
+#sethello 2
-#stp off"
+#stp on"
 
 # You can also configure the bridge or bridge members via sysfs on 2.6 kernels
 # or newer. See the kernel bridge documentation for a description of these
@@ -874,7 +903,7 @@
 # link_6to4="eth0"		# Interface to base its addresses on
 # config_6to4="ip6to4"
 # You may want to depend on eth0 like so
-#rc_need_6to4="net.eth0"
+#rc_net_6to4_need="net.eth0"
 # To ensure that eth0 is configured before 6to4. Of course, the tunnel could be
 # any name and this also works for any configured interface.
 # NOTE: If you're not using iproute2 then your 6to4 tunnel has to be called
@@ -917,6 +946,8 @@
 # /etc/iproute2/rt_tables, an example follows:
 # 2 oob
 # 3 external
+#
+# IPv6 RPDB entries are to be found in the rules6_IFVAR variables:
 
 #rules_eth0="
 #from ZZZ.ZZZ.200.128/27 table oob priority 500
@@ -931,6 +962,11 @@
 #XXX.XXX.112.0/24 dev eth1 table external scope link
 #default via XXX.XXX.112.1 dev eth1"
 
+# IPv6 example:
+#rules6_eth0="
+#from 2001:0DB8:AAAA:BBBB::/64 table vpn priority 100
+#to 2001:0DB8:AAAA:BBBB::/64 table vpn priority 150"
+
 
 #-----------------------------------------------------------------------------
 # System
@@ -975,10 +1011,12 @@
 # and you're done :)
 
 # By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services know that network is up
+# If you would like it to wait so that other services know that network is
-# then you can specify a timeout here.
+# up then you can specify a timeout here. A value of 0 means wait forever,
+# and a negative value means never wait.
+#plug_timeout_eth0="10"
+# If you want to set it for all interfaces:
 #plug_timeout="10"
-# A value of 0 means wait forever.
 
 # If you don't want to use netplug on a specific interface but you have it
 # installed, you can disable it for that interface via the modules statement
@@ -1078,6 +1116,17 @@
 #
 # ${IFACE} is set to the interface being brought up/down
 # ${IFVAR} is ${IFACE} converted to variable name bash allows
+#
+# For historical and compatibility reasons, preup is actually normally called
+# in the following sequence: up ; preup ; up.
+# The first up causes the kernel to initialize the device, so
+# that it is available for use in the preup function.  However, for some
+# hardware, e.g. CAN devices, some configuration is needed before trying to up
+# the interface will actually work. For such hardware, the
+# up_before_preup variables will allow skipping the first up call if set
+# to yes.
+#up_before_preup_IFVAR="NO"
+#up_before_preup="NO"
 
 #preup() {
 #	# Test for link on the interface prior to bringing it up.  This

etc/Makefile

@@ -1,21 +1,28 @@
 DIR=	${SYSCONFDIR}
-CONF=	rc.conf
+SRCS=	rc.conf.in rc.in rc.shutdown.in
+BIN=	${BIN-${OS}}
+CONF=	rc.conf ${BIN-${OS}}
 
 CLEANFILES+=	rc.conf
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+SED_EXTRA-FreeBSD=	-e 's:@TERM@:cons25:g'
+BIN-FreeBSD=		rc rc.shutdown rc.devd
+CONF-FreeBSD=		devd.conf
+
+SED_EXTRA-Linux=	-e 's:@TERM@:wsvt25:g'
+BIN-Linux=
+CONF-Linux=
+
+SED_EXTRA-NetBSD=	-e 's:@TERM@:wsvt25:g'
+BIN-NetBSD=		rc rc.shutdown
+CONF-NetBSD=
+
+SED_EXTRA=	${SED_EXTRA-${OS}}
+
 include ${MK}/scripts.mk
 
-# We can't use "ifndef" here because that treats set-but-empty
-# as not-set which is not what we want
-MKRCSYS ?= automagicplease
-ifeq ($(MKRCSYS),automagicplease)
-# If the user isn't picking a default, then have the
-# config go with runtime automagic detection #357247
-rc.conf: SED_EXTRA += -e '/^rc_sys=""/s:^:\#:'
-MKRCSYS =
-endif
 rc.conf: rc.conf.in rc.conf.${OS}
 	${SED} ${SED_REPLACE} ${SED_EXTRA} $^ > $@

etc/Makefile.FreeBSD

@@ -1,4 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:cons25:g'
-SRCS+=		rc.conf.in rc.in rc.shutdown.in
-CONF+=		devd.conf
-BIN+=		rc rc.shutdown rc.devd

etc/Makefile.Linux

@@ -1,2 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
-SRCS+=		rc.conf.in rc.in rc.shutdown.in

etc/Makefile.NetBSD

@@ -1,3 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
-SRCS+=		rc.conf.in rc.in rc.shutdown.in
-BIN+=		rc rc.shutdown

etc/rc.conf.FreeBSD

@@ -1,11 +1,12 @@
+##############################################################################
+# FreeBSD SPECIFIC OPTIONS
+
 # This is the subsystem type. Valid options on FreeBSD:
 # ""        - nothing special
 # "jail"    - FreeBSD jails
-# "prefix"  - Prefix
+# If this is commented out, automatic detection will be used.
-# If this is commented out, automatic detection will be attempted.
-# Note that automatic detection does not work in a prefix environment.
 #
 # This should be set to the value representing the environment this file is
 # PRESENTLY in, not the virtualization the environment is capable of.
-rc_sys="@RC_SYS_DEFAULT@"
+#rc_sys=""
 

etc/rc.conf.Linux

@@ -1,24 +1,20 @@
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
 # This is the subsystem type. Valid options on Linux:
 # ""        - nothing special
 # "lxc"     - Linux Containers
 # "openvz"  - Linux OpenVZ
-# "prefix"  - Prefix
 # "uml"     - Usermode Linux
 # "vserver" - Linux vserver
 # "xen0"    - Xen0 Domain
 # "xenU"    - XenU Domain
-# If this is commented out, automatic detection will be attempted.
+# If this is commented out, automatic detection will be used.
-# Note that autodetection will not work in a prefix environment or in a
-# linux container.
 #
 # This should be set to the value representing the environment this file is
 # PRESENTLY in, not the virtualization the environment is capable of.
-rc_sys="@RC_SYS_DEFAULT@"
+#rc_sys=""
-
-##############################################################################
-# LINUX SPECIFIC OPTIONS
 
 # This is the number of tty's used in most of the rc-scripts (like
 # consolefont, numlock, etc ...)
 rc_tty_number=12
-

etc/rc.conf.NetBSD

@@ -1,12 +1,13 @@
+##############################################################################
+# NetBSD SPECIFIC OPTIONS
+
 # This is the subsystem type. Valid options on NetBSD:
 # ""        - nothing special
-# "prefix"  - Prefix
 # "xen0"    - Xen0 Domain
 # "xenU"    - XenU Domain
-# If this is commented out, automatic detection will be attempted.
+# If this is commented out, automatic detection will be used.
-# Note that automatic detection does not work in a prefix environment.
 #
 # This should be set to the value representing the environment this file is
 # PRESENTLY in, not the virtualization the environment is capable of.
-rc_sys="@RC_SYS_DEFAULT@"
+#rc_sys=""
 

etc/rc.conf.in

@@ -47,6 +47,10 @@
 # logging can take place and as such cannot log the sysinit runlevel.
 #rc_logger="YES"
 
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
+
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
 #rc_env_allow="VAR1 VAR2"

etc/rc.devd

@@ -1,6 +1,6 @@
 #!/bin/sh
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged
 export IN_BACKGROUND=yes

etc/rc.in

@@ -1,6 +1,6 @@
 #!@SHELL@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)

etc/rc.shutdown.in

@@ -1,6 +1,6 @@
 #!@SHELL@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # Handle interrupts
 trap : SIGINT SIGQUIT

init.d.misc/Makefile

@@ -7,5 +7,5 @@ MK=	../mk
 
 SED_EXTRA+= -e 's:@VARBASE@:/var:g'
 
+include ${MK}/os.mk
 include ${MK}/scripts.mk
-include Makefile.${OS}

init.d.misc/Makefile.FreeBSD

@@ -1 +0,0 @@
-PKG_PREFIX?=	/usr/local

init.d.misc/Makefile.Linux

@@ -1 +0,0 @@
-PKG_PREFIX?=/usr

init.d.misc/Makefile.NetBSD

@@ -1 +0,0 @@
-PKG_PREFIX?=	/usr/pkg

init.d.misc/avahi-dnsconfd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-dnsconfd
 command_args="$avahi_dnsconfd_args -D"

init.d.misc/avahid.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-daemon
 command_args="$avahid_args -D"

init.d.misc/dbus.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/bin/dbus-daemon
 pidfile=@VARBASE@/run/dbus/pid

init.d.misc/dhcpcd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/sbin/dhcpcd
 pidfile=/var/run/dhcpcd.pid

init.d.misc/dnsmasq.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/dnsmasq
 command_args=$dnsmasq_args

init.d.misc/hald.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/hald
 pidfile=@VARBASE@/run/hald/hald.pid

init.d.misc/named.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/named
 command_args=$named_args

init.d.misc/ntpd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 : ${ntpd_config:=/etc/ntp.conf}
 : ${ntpd_drift:=/var/db/ntpd.drift}

init.d.misc/openvpn.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 vpn=${RC_SVCNAME#*.}
 name="OpenVPN"

init.d.misc/polkitd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/polkitd
 pidfile=@VARBASE@/run/polkitd/polkitd.pid

init.d.misc/sshd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/sshd
 command_args=$sshd_args

init.d.misc/wpa_supplicant.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/wpa_supplicant
 : ${wpa_supplicant_conf:=/etc/wpa_supplicant.conf}

init.d/.gitignore

@@ -11,6 +11,7 @@ network
 root
 savecache
 swap
+swapfiles
 sysctl
 urandom
 devfs

init.d/Makefile

@@ -1,25 +1,42 @@
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
-	network.in root.in savecache.in staticroute.in swap.in swclock.in \
+	network.in root.in savecache.in staticroute.in swap.in swapfiles.in \
-	sysctl.in urandom.in
+	swclock.in sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
-# Build our old net foo or not
+INSTALLAFTER=	_installafter_net.lo
-ifeq (${MKOLDNET},yes)
+CLEANFILES+=	net.lo
-_OLDNET=	net.lo
+TARGETS+=	net.lo
-endif
-_NET_LO=	${_OLDNET}
-
-INSTALLAFTER=	_installafter_${_NET_LO}
-CLEANFILES+=	${_NET_LO}
-TARGETS+=	${_NET_LO}
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+NET_LO-FreeBSD=	net.lo0
+# Generic BSD scripts
+SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+		rpcbind.in savecore.in syslogd.in
+# These are FreeBSD specific
+SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
+		powerd.in syscons.in
+
+NET_LO-Linux=	net.lo
+SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
+		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
+		procfs.in sysfs.in termencoding.in
+
+NET_LO-NetBSD=	net.lo0
+# Generic BSD scripts
+SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+		rpcbind.in savecore.in syslogd.in
+# These are NetBSD specific
+SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
+
+%.in: %${SFX}
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@
+
 include ${MK}/scripts.mk
 
 _installafter_: realinstall
 
 _installafter_net.lo: realinstall
-	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO}
+	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO-${OS}}

init.d/Makefile.FreeBSD

@@ -1,13 +0,0 @@
-NET_LO=	net.lo0
-
-# Generic BSD scripts
-SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-	rpcbind.in savecore.in syslogd.in
-
-# These are FreeBSD specific
-SRCS+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
-	powerd.in syscons.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.Linux

@@ -1,9 +0,0 @@
-NET_LO=	net.lo
-
-SRCS+=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in killprocs.in \
-	modules.in mount-ro.in mtab.in numlock.in procfs.in sysfs.in \
-	termencoding.in
-
-.SUFFIXES:	.Linux.in
-.Linux.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.NetBSD

@@ -1,12 +0,0 @@
-NET_LO=	net.lo0
-
-# Generic BSD scripts
-SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-	rpcbind.in savecore.in syslogd.in
-
-# These are NetBSD specific
-SRCS+=	devdb.in swap-blk.in ttys.in wscons.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/adjkerntz.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="save"
 
@@ -22,7 +22,7 @@ depend()
 	   [ "$clock" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
 		need root
 	fi
-	keyword -jail -prefix
+	keyword -jail
 }
 
 start()

init.d/bootmisc.in

@@ -1,21 +1,17 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 depend()
 {
 	need localmount
 	before logger
 	after clock sysctl
-	keyword -prefix -timeout
+	keyword -timeout
-}
-
-dir_writeable()
-{
-	mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
 }
 
 : ${wipe_tmp:=${WIPE_TMP:-yes}}
+: ${log_dmesg:=${LOG_DMESG:-yes}}
 
 cleanup_tmp_dir()
 {
@@ -24,7 +20,7 @@ cleanup_tmp_dir()
 	if ! [ -d "$dir" ]; then
 		mkdir -p "$dir" || return $?
 	fi
-	dir_writeable "$dir" || return 1
+	checkpath -W "$dir" || return 1
 	chmod a+rwt "$dir" 2> /dev/null
 	cd "$dir" || return 1
 	if yesno $wipe_tmp; then
@@ -71,6 +67,26 @@ mkutmp()
 	chmod 0664 "$1"
 }
 
+migrate_to_run()
+{
+	src="$1"
+	dst="$2"
+ 	if [ -L $src -a "$(readlink -f $src)" != $dst ]; then
+ 		ewarn "$src does not point to $dst."
+ 		ewarn "Setting $src to point to $dst."
+ 		rm $src
+ 	elif [ ! -L $src -a -d $src ]; then
+ 		ebegin "Migrating $src to $dst"
+ 		cp -a $src/* $dst/
+ 		rm -rf $src
+ 		eend $?
+ 	fi
+ 	# If $src doesn't exist at all, just run this
+ 	if [ ! -e $src ]; then
+ 		ln -s $dst $src
+ 	fi
+}
+
 start()
 {
 	# Remove any added console dirs
@@ -78,8 +94,16 @@ start()
 
 	local logw=false runw=false extra=
 	# Ensure that our basic dirs exist
-	[ "$RC_UNAME" = Linux ] && extra=/var/lib/misc # Satisfy Linux FHS
+	if [ "$RC_UNAME" = Linux ]; then
-	for x in /var/log /var/run /tmp $extra; do
+		# Satisfy Linux FHS
+		extra=/var/lib/misc
+		if [ ! -d /run ]; then
+			extra="/var/run $extra"
+		fi
+	else
+		extra=/var/run
+	fi
+	for x in /var/log /tmp $extra; do
 		if ! [ -d $x ]; then
 			if ! mkdir -p $x; then
 				eend 1 "failed to create needed directory $x"
@@ -88,7 +112,12 @@ start()
 		fi
 	done
 
-	if dir_writeable /var/run; then
+	if [ "$RC_UNAME" = Linux -a -d /run ] && false; then
+		migrate_to_run	/var/lock /run/lock
+		migrate_to_run	/var/run /run
+	fi
+
+	if checkpath -W /var/run; then
 		ebegin "Creating user login records"
 		local xtra=
 		[ "$RC_UNAME" = NetBSD ] && xtra=x
@@ -130,7 +159,7 @@ start()
 		cleanup_tmp_dir "$tmp"
 	done
 
-	if dir_writeable /tmp; then
+	if checkpath -W /tmp; then
 		# Make sure our X11 stuff have the correct permissions
 		# Omit the chown as bootmisc is run before network is up
 		# and users may be using lame LDAP auth #139411
@@ -142,15 +171,16 @@ start()
 		fi
 	fi
 
-	if $logw || dir_writeable /var/log; then
+	if yesno $log_dmesg; then
-		# Create an 'after-boot' dmesg log
+		if $logw || checkpath -W /var/log; then
-		if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
+			# Create an 'after-boot' dmesg log
-			dmesg > /var/log/dmesg
+			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
-			chmod 640 /var/log/dmesg
+				dmesg > /var/log/dmesg
+				chmod 640 /var/log/dmesg
+			fi
 		fi
 	fi
 
-	[ -w /etc/nologin ] && rm -f /etc/nologin
 	return 0
 }
 

init.d/consolefont.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Sets a font for the consoles."
 
@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -openvz -uml -vserver -xenu -lxc
 }
 
 start()
@@ -49,12 +49,12 @@ start()
 			retval=1
 			break
 		fi
-		x=$(($x + 1))
+		: $(( x += 1 ))
 	done
 	eend $retval
 
 	# Store the last font so we can use it ASAP on boot
-	if [ $retval -eq 0 -a -w "$RC_LIBEXECDIR" ]; then
+	if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then
 		mkdir -p "$RC_LIBEXECDIR"/console
 		for font in /usr/share/consolefonts/"$consolefont".*; do
 			:

init.d/devd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/sbin/devd
 command_args=$devd_args
@@ -10,7 +10,7 @@ depend() {
 	need localmount
 	after bootmisc
 	before net.lo0
-	keyword -jail -prefix
+	keyword -jail
 }
 
 start_pre() {

init.d/devdb.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Creates the dev database"
 
@@ -11,7 +11,7 @@ depend()
 
 start()
 {
-	ebegin "Bulding the dev database"
+	ebegin "Building the dev database"
 	if [ /var/run/dev.db -nt /dev ]; then
 		:
 	else

init.d/devfs.in

@@ -1,12 +1,12 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mount system critical filesystems in /dev."
 
 depend() {
 	use dev
-	keyword -prefix -vserver
+	keyword -vserver
 }
 
 start() {

init.d/dmesg.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Set the dmesg level for a cleaner boot"
 

init.d/dumpon.in

@@ -1,12 +1,12 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Configures a specific kernel dump device."
 
 depend() {
 	need swap
-	keyword -jail -prefix
+	keyword -jail
 }
 
 start() {
@@ -19,7 +19,7 @@ start() {
 }
 
 stop() {
-	ebegin "Deactiving kernel core dump device"
+	ebegin "Deactivating kernel core dump device"
 	dumpon off
 	eend $?
 }

init.d/fsck.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Check and repair filesystems according to /etc/fstab"
 _IFS="
@@ -9,7 +9,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -timeout -vserver -lxc
+	keyword -jail -openvz -timeout -vserver -lxc
 }
 
 _abort() {
@@ -48,8 +48,13 @@ start()
 
 	if [ -n "$fsck_passno" ]; then
 		check_extra="[passno $fsck_passno] $check_extra"
+		if [ -n "$fsck_mnt" ]; then
+			eerror "Only 1 of fsck_passno and fsck_mnt must be set!"
+			return 1
+		fi
 	fi
 	ebegin "Checking local filesystems $check_extra"
+	# Append passno mounts
 	for p in $fsck_passno; do
 		local IFS="$_IFS"
 		case "$p" in
@@ -58,10 +63,16 @@ start()
 		set -- "$@" $(fstabinfo --passno "$p")
 		unset IFS
 	done
+	# Append custom mounts
+	for m in $fsck_mnt ; do
+		local IFS="$_IFS"
+		set -- "$@" "$m"
+		unset IFS
+	done
 
 	if [ "$RC_UNAME" = Linux ]; then
 		fsck_opts="$fsck_opts -C0 -T"
-		if [ -z "$fsck_passno" ]; then
+		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
 			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
@@ -91,7 +102,7 @@ start()
 			_reboot
 		fi;;
 	8)	ewend 1 "Operational error"; return 0;;
-	12)	ewend 1 "fsck interupted";;
+	12)	ewend 1 "fsck interrupted";;
 	*)	eend 2 "Filesystems couldn't be fixed";;
 	esac
 	_abort || return 1

init.d/hostid.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="reset"
 : ${hostid_file:=/etc/hostid}
@@ -9,7 +9,7 @@ depend()
 {
 	use root
 	before devd net
-	keyword -jail -prefix
+	keyword -jail
 }
 
 _set()

init.d/hostname.in

@@ -1,11 +1,11 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -prefix
+	keyword -lxc
 }
 
 start()

init.d/hwclock.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="save show"
 
@@ -28,7 +28,7 @@ depend()
 	else
 		before *
 	fi
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -openvz -uml -vserver -xenu -lxc
 }
 
 setupopts()
@@ -85,7 +85,7 @@ start()
 
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
 		_hwclock --adjust $utc_cmd
-		retval=$(($retval + $?))
+		: $(( retval += $? ))
 	fi
 
 	# If setting UTC, don't bother to run hwclock when first booting
@@ -94,12 +94,12 @@ start()
 		"$utc_cmd" != --utc -o \
 		-n "$clock_args" ];
 	then
-		if yesno $clock_hctosys; then
+		if yesno ${clock_hctosys:-YES}; then
 			_hwclock --hctosys $utc_cmd $clock_args
 		else
 			_hwclock --systz $utc_cmd $clock_args
 		fi
-		retval=$(($retval + $?))
+		: $(( retval += $? ))
 	fi
 
 	eend $retval "Failed to set the system clock"
@@ -111,7 +111,7 @@ stop()
 {
 	# Don't tweak the hardware clock on LiveCD halt.
 	[ -n "$CDBOOT" ] && return 0
-	yesno $clock_systohc || return 0
+	yesno ${clock_systohc:-YES} || return 0
 
 	local retval=0 errstr=""
 	setupopts

init.d/ipfw.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
 
@@ -59,7 +59,7 @@ start() {
 		return 1
 	fi
 
-	# Use a statefull firewall
+	# Use a stateful firewall
 	ipfw add check-state
 	ipfw add pass tcp from me to any established
 
@@ -123,7 +123,7 @@ start() {
 	ipfw add deny udp from any to any 520 in
 
 	# Noise from webbrowsing.
-	# The statefull filter is a bit agressive, and will cause some
+	# The stateful filter is a bit aggressive, and will cause some
 	# connection teardowns to be logged.
 	ipfw add deny tcp from any 80,443 to any 1024-65535 in
 

init.d/keymaps.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Applies a keymap for the consoles."
 
@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -openvz -uml -vserver -xenu -lxc
 }
 
 start()
@@ -47,7 +47,7 @@ start()
 	n=1
 	while [ $n -le $ttyn ]; do
 		kbd_mode $kmode -C $ttydev$n
-		n=$(($n + 1))
+		: $(( n += 1 ))
 	done
 	eend 0
 
@@ -63,7 +63,7 @@ start()
 	fi
 
 	# Save the keymapping for use immediately at boot
-	if [ -w "$RC_LIBEXECDIR" ]; then
+	if checkpath -W "$RC_LIBEXECDIR"; then
 		mkdir -p "$RC_LIBEXECDIR"/console
 		dumpkeys >"$RC_LIBEXECDIR"/console/keymap
 	fi

init.d/killprocs.in

@@ -1,22 +1,17 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Kill all processes so we can unmount disks cleanly."
 
-depend()
-{
-	keyword -prefix
-}
-
 start()
 {
 	ebegin "Terminating remaining processes"
-	killall5 -15
+	killall5 -15 ${killall5_opts}
 	sleep 1
 	eend 0
 	ebegin "Killing remaining processes"
-	killall5 -9
+	killall5 -9 ${killall5_opts}
 	sleep 1
 	eend 0
 }

init.d/local.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Executes user programs in @SYSCONFDIR@/local.d"
 
@@ -27,7 +27,7 @@ start()
 		local_start
 	fi
 
-	return 0
+	eend 0
 }
 
 stop()
@@ -47,5 +47,5 @@ stop()
 		local_stop
 	fi
 
-	return 0
+	eend 0
 }

init.d/localmount.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mounts disks and swap according to /etc/fstab."
 
@@ -9,14 +9,14 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword -jail -openvz -vserver -lxc
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
 	local types="noproc" x= no_netdev=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		types="${types},${x}"
 	done
 
@@ -34,22 +34,20 @@ start()
 stop()
 {
 	# We never unmount / or /dev or $RC_SVCDIR
-	local x= no_umounts_r="/|/dev|/dev/.*|${RC_SVCDIR}"
+
-	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib|/libexec"
+	# Bug 381783
+	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+
+	local x= no_umounts_r="/|/dev|/dev/.*|${rc_svcdir}"
+	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib(32|64)?|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	OIFS=$IFS SIFS=${IFS-y}
+	local IFS="$IFS:"
-	IFS=$IFS:
 	for x in $no_umounts $RC_NO_UMOUNTS; do
 		no_umounts_r="$no_umounts_r|$x"
 	done
-	if [ "$SIFS" = y ]; then
-		IFS=$OIFS
-	else
-		unset IFS
-	fi
 
 	if [ "$RC_UNAME" = Linux ]; then
-		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/sys|/sys/.*"
+		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
 	fi
 	no_umounts_r="^($no_umounts_r)$"
 
@@ -70,12 +68,12 @@ stop()
 	einfo "Unmounting filesystems"
 	eindent
 	local fs=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount umount --skip-point-regex "$no_umounts_r" \
-		${fs:+--skip-fstype-regex} $fs --nonetdev
+		"${fs:+--skip-fstype-regex}" $fs --nonetdev
 	eoutdent
 
 	return 0

init.d/mixer.in

@@ -1,13 +1,13 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="restore"
 
 depend()
 {
 	need localmount
-	keyword -jail -prefix
+	keyword -jail
 }
 
 restore()
@@ -21,7 +21,7 @@ restore()
 			mixer -f "$mixer" \
 			$(cat "/var/db/${mixer#/dev/}-state") >/dev/null
 			veend $?
-			: $((retval += $?))
+			: $(( retval += $? ))
 		fi
 	done
 }
@@ -40,7 +40,7 @@ stop()
 		vebegin "$mixer"
 		mixer -f "$mixer" -s >/var/db/"${mixer#/dev/}"-state
 		veend $?
-		: $((retval += $?))
+		: $(( retval += $? ))
 	done
 	eoutdent
 	eend $retval

init.d/modules.in

@@ -1,13 +1,13 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Loads a user defined list of kernel modules."
 
 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -vserver -lxc
+	keyword -openvz -vserver -lxc
 }
 
 start()
@@ -16,18 +16,21 @@ start()
 	# support compiled in ...
 	[ ! -f /proc/modules ] && return 0
 
-	local KV=$(uname -r)
+	local KV x y kv_variant_list
-	local KV_MAJOR=${KV%%.*}
+	KV=$(uname -r)
-	local x=${KV#*.}
+	# full $KV
-	local KV_MINOR=${x%%.*}
+	kv_variant_list="${KV}"
-	x=${KV#*.*.}
+	# remove any KV_EXTRA options to just get the full version
-	local KV_MICRO=${x%%-*}
+	x=${KV%%-*}
+	# now slowly strip them
+	while [ -n "$x" ] && [ "$x" != "$y" ]; do
+		kv_variant_list="${kv_variant_list} $x"
+		y=$x
+		x=${x%.*}
+	done
 
 	local list= x= xx= y= args= mpargs= cnt=0 a=
-	for x in "$KV" \
+	for x in $kv_variant_list ; do
-		$KV_MAJOR.$KV_MINOR.$KV_MICRO \
-		$KV_MAJOR.$KV_MINOR \
-	; do
 		eval list=\$modules_$(shell_var "$x")
 		[ -n "$list" ] && break
 	done
@@ -45,10 +48,7 @@ start()
 		fi
 		aa=$(shell_var "$a")
 		xx=$(shell_var "$x")
-		for y in "$KV" \
+		for y in $kv_variant_list ; do
-			$KV_MAJOR.$KV_MINOR.$KV_MICRO \
-			$KV_MAJOR.$KV_MINOR \
-		; do
 			eval args=\$module_${aa}_args_$(shell_var "$y")
 			[ -n "${args}" ] && break
 			eval args=\$module_${xx}_args_$(shell_var "$y")
@@ -57,7 +57,7 @@ start()
 		[ -z "$args" ] && eval args=\$module_${aa}_args
 		[ -z "$args" ] && eval args=\$module_${xx}_args
 		eval modprobe -q "$mpargs" "$x" "$args"
-		eend $? "Failed to load $x" && cnt=$(($cnt + 1))
+		eend $? "Failed to load $x" && : $(( cnt += 1 ))
 	done
 	einfo "Autoloaded $cnt module(s)"
 }

init.d/mount-ro.in

@@ -1,13 +1,13 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Re-mount filesytems read-only for a clean reboot."
 
 depend()
 {
 	need killprocs savecache
-	keyword -prefix -openvz -vserver -lxc
+	keyword -openvz -vserver -lxc
 }
 
 start()
@@ -19,28 +19,26 @@ start()
 	# We need the do_unmount function
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 	eindent
-	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${RC_SVCDIR}" x= fs=
+
-	m="$m|/bin|/sbin|/lib|/libexec"
+	# Bug 381783
+	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+
+	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${rc_svcdir}" x= fs=
+	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	local OIFS=$IFS SIFS=${IFS-y} IFS=$IFS
+	local IFS="$IFS:"
-	IFS=$IFS:
 	for x in $no_umounts $RC_NO_UMOUNTS; do
 		m="$m|$x"
 	done
-	if [ "$SIFS" = y ]; then
-		IFS=$OIFS
-	else
-		unset IFS
-	fi
 	m="^($m)$"
 	fs=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount "umount -r" \
 		--skip-point-regex "$m" \
-		${fs:+--skip-fstype-regex} $fs --nonetdev
+		"${fs:+--skip-fstype-regex}" $fs --nonetdev
 	eoutdent
 	eend $?
 }

init.d/moused.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 mouse=${RC_SVCNAME##*.}
 if [ -n "$mouse" -a "$mouse" != "moused" ]; then
@@ -16,7 +16,7 @@ depend()
 {
 	need localmount
 	after bootmisc
-	keyword -jail -prefix
+	keyword -jail
 }
 
 start()
@@ -54,7 +54,7 @@ start()
 		local ttyv=
 		for ttyv in /dev/ttyv*; do
 			vidcontrol < "$ttyv" -m on
-			: $((retval+= $?))
+			: $(( retval += $? ))
 		done
 	fi
 

init.d/mtab.in

@@ -1,20 +1,19 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Update /etc/mtab to match what the kernel knows about"
 
 depend()
 {
 	need root
-	keyword -prefix
 }
 
 start()
 {
-	# /etc/mtab could be a symlink to /proc/mounts
+	if [ -L /etc/mtab ]
-	if [ ! -w /etc/mtab -a -L /etc/mtab ]; then
+	then
-		eeinfo "Skipping mtab update (non writeable symlink)"
+		einfo "Skipping mtab update (mtab is a symbolic link)"
 		return 0
 	fi
 

init.d/net.lo.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 MODULESDIR="${RC_LIBEXECDIR}/net"
 MODULESLIST="${RC_SVCDIR}/nettree"
@@ -20,12 +20,14 @@ depend()
 
 	need localmount
 	after bootmisc
-	provide net
+	keyword -jail -vserver
-	keyword -jail -prefix -vserver
 
 	case "${IFACE}" in
-		lo|lo0);;
+		lo|lo0) provide lo;;
-		*) after net.lo net.lo0;;
+		*)
+			after net.lo net.lo0 dbus
+			provide net
+			;;
 	esac
 
 	if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then
@@ -37,17 +39,32 @@ depend()
 		eval prov=\$rc_${dep}_${IFVAR}
 		if [ -n "${prov}" ]; then
 			${dep} ${prov}
+			ewarn "rc_${dep}_${IFVAR} is deprecated."
+			ewarn "Please use rc_net_${IFVAR}_${dep} instead."
 		fi
 	done
 }
 
 # Support bash arrays - sigh
+_array_helper()
+{
+	local _a=
+
+	eval _a=\$$1
+	_a=$(echo "${_a}" | sed -e 's:^[[:space:]]*::' -e 's:[[:space:]]*$::' -e '/^$/d' -e 's:[[:space:]]\{1,\}: :g')
+
+	[ -n "${_a}" ] && printf "%s\n" "${_a}"
+}
+
 _get_array()
 {
 	local _a=
 	if [ -n "${BASH}" ]; then
 		case "$(declare -p "$1" 2>/dev/null)" in
 			"declare -a "*)
+				ewarn "You are using a bash array for $1."
+				ewarn "This feature will be removed in the future."
+				ewarn "Please see net.example for the correct format for $1."
 				eval "set -- \"\${$1[@]}\""
 				for _a; do
 					printf "%s\n" "${_a}"
@@ -57,10 +74,7 @@ _get_array()
 		esac
 	fi
 
-	eval _a=\$$1
+	_array_helper $1
-	printf "%s" "${_a}"
-	printf "\n"
-	[ -n "${_a}" ]
 }
 
 # Flatten bash arrays to simple strings
@@ -69,6 +83,9 @@ _flatten_array()
 	if [ -n "${BASH}" ]; then
 		case "$(declare -p "$1" 2>/dev/null)" in
 			"declare -a "*)
+				ewarn "You are using a bash array for $1."
+				ewarn "This feature will be removed in the future."
+				ewarn "Please see net.example for the correct format for $1."
 				eval "set -- \"\${$1[@]}\""
 				for x; do
 					printf "'%s' " "$(printf "$x" | sed "s:':'\\\'':g")"
@@ -78,10 +95,7 @@ _flatten_array()
 		esac
 	fi
 
-	eval _a=\$$1
+	_array_helper $1
-	printf "%s" "${_a}"
-	printf "\n"
-	[ -n "${_a}" ]
 }
 
 _wait_for_carrier()
@@ -105,7 +119,7 @@ _wait_for_carrier()
 			eend 0
 			return 0
 		fi
-		timeout=$((${timeout} - 1))
+		: $(( timeout -= 1 ))
 		[ "${efunc}" = "einfon" ] && printf "."
 	done
 
@@ -134,9 +148,9 @@ _netmask2cidr()
 	local i= len=
 	local IFS=.
 	for i in $1; do
-		while [ ${i} != "0" ]; do
+		while [ ${i} -ne 0 ]; do
-			len=$((${len} + ${i} % 2))
+			: $(( len += i % 2 ))
-			i=$((${i} >> 1))
+			: $(( i >>= 1 ))
 		done
 	done
 
@@ -159,6 +173,36 @@ _configure_variables()
 	done
 }
 
+_which()
+{
+	local i OIFS
+	# Empty
+	[ -z "$1" ] && return
+	# check paths
+	OIFS="$IFS"
+	IFS=:
+	for i in $PATH ; do
+		[ -x $i/$1 ] && echo $i/$1 && break
+	done
+	IFS=$OIFS
+}
+
+# Like _which, but also consider shell builtins, and multiple alternatives
+_program_available()
+{
+	[ -z "$1" ] && return 0
+	local x=
+	for x; do
+		case "${x}" in
+			/*) [ -x "${x}" ] && break;;
+			*) type "${x}" >/dev/null 2>&1 && break;;
+		esac
+		unset x
+	done
+	[ -n "${x}" ] && echo $x && return 0
+	return 1
+}
+
 _show_address()
 {
 	einfo "received address $(_get_inet_address "${IFACE}")"
@@ -267,7 +311,7 @@ _gen_module_list()
 		echo "module_${i}_program_start='${PROGRAM_START}'" >> "${MODULESLIST}"
 		echo "module_${i}_program_stop='${PROGRAM_STOP}'" >> "${MODULESLIST}"
 		echo "module_${i}_provide='${PROVIDE}'" >> "${MODULESLIST}"
-		i=$((${i} + 1))
+		: $(( i += 1 ))
 	done
 	echo "module_${i}=" >> "${MODULESLIST}"
 	)
@@ -294,18 +338,17 @@ _load_modules()
 
 	local i=-1 x= mod= f= provides=
 	while true; do
-		i=$((${i} + 1))
+		: $(( i += 1 ))
 		eval mod=\$module_${i}
 		[ -z "${mod}" ] && break
 		[ -e "${MODULESDIR}/${mod}.sh" ] || continue
 
 		eval set -- \$module_${i}_program
 		if [ -n "$1" ]; then
-			x=
+			if ! _program_available "$@" >/dev/null; then
-			for x; do
+				vewarn "Skipping module $mod due to missing program: $@"
-				[ -x "${x}" ] && break
+				continue
-			done
+			fi
-			[ -x "${x}" ] || continue
 		fi
 		if ${starting}; then
 			eval set -- \$module_${i}_program_start
@@ -313,15 +356,10 @@ _load_modules()
 			eval set -- \$module_${i}_program_stop
 		fi
 		if [ -n "$1" ]; then
-			x=
+			if ! _program_available "$@" >/dev/null; then
-			for x; do
+				vewarn "Skipping module $mod due to missing program: $@"
-				case "${x}" in
+				continue
-					/*) [ -x "${x}" ] && break;;
+			fi
-					*) type "${x}" >/dev/null 2>&1 && break;;
-				esac
-				unset x
-			done
-			[ -n "${x}" ] || continue
 		fi
 
 		eval provides=\$module_${i}_provide
@@ -397,16 +435,18 @@ _load_config()
 	set -- ${config}
 
 	# We should support a space separated array for cidr configs
+	# But only as long as they do not contain other parameters for the address
 	if [ $# = 1 ]; then
 		unset IFS
 		set -- ${config}
 		# Of course, we may have a single address added old style.
-		case "$2" in
+		# If the NEXT argument is a v4 or v6 address, it's the next config.
-			netmask|broadcast|brd|brd+|peer|pointopoint)
+		# Otherwise, it's arguments to the first config...
-				local IFS="$__IFS"
+		if [ "${2#*.*}" = "${2}" -a "${2#*:*}" = "${2}" ]; then
-				set -- ${config}
+			# Not an IPv4/IPv6
-				;;
+			local IFS="$__IFS"
-		esac
+			set -- ${config}
+		fi
 	fi
 
 	# Ensure that loopback has the correct address
@@ -428,7 +468,7 @@ _load_config()
 	# so modules can influence it
 	for cmd; do
 		eval config_${config_index}="'${cmd}'"
-		config_index=$((${config_index} + 1))
+		: $(( config_index += 1 ))
 	done
 	# Terminate the list
 	eval config_${config_index}=
@@ -436,7 +476,7 @@ _load_config()
 	config_index=0
 	for cmd in ${fallback}; do
 		eval fallback_${config_index}="'${cmd}'"
-		config_index=$((${config_index} + 1))
+		: $(( config_index += 1 ))
 	done
 	# Terminate the list
 	eval fallback_${config_index}=
@@ -478,7 +518,9 @@ start()
 {
 	local IFACE=${RC_SVCNAME#*.} oneworked=false fallback=false module=
 	local IFVAR=$(shell_var "${IFACE}") cmd= our_metric=
-	local metric=0
+	local metric=0 _up_before_preup
+	eval _up_before_preup="\$up_before_preup_${IFVAR}"
+	[ -z "${_up_before_preup}" ] && _up_before_preup=$up_before_preup
 
 	einfo "Bringing up interface ${IFACE}"
 	eindent
@@ -492,7 +534,7 @@ start()
 	# available in preup and afterwards incase the user inadvertently
 	# brings it down
 	if [ "$(command -v preup)" = "preup" ]; then
-		_up 2>/dev/null
+		yesno "${_up_before_preup:-yes}" && _up 2>/dev/null
 		ebegin "Running preup"
 		eindent
 		preup || return 1
@@ -531,7 +573,7 @@ start()
 	if [ -n "${our_metric}" ]; then
 		metric=${our_metric}
 	elif [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		metric=$((${metric} + $(_ifindex)))
+		: $(( metric += $(_ifindex) ))
 	fi
 
 	while true; do
@@ -539,7 +581,9 @@ start()
 		[ -z "${config}" ] && break
 
 		set -- ${config}
-		ebegin "$1"
+		if [ "$1" != "null" -a "$1" != "noop" ]; then
+			ebegin "$1"
+		fi
 		eindent
 		case "$1" in
 			noop)
@@ -569,11 +613,11 @@ start()
 				eindent
 				eval config_${config_index}=\$config
 				unset fallback_${config_index}
-				config_index=$((${config_index} - 1))
+				: $(( config_index -= 1 ))
 			fi
 		fi
 		eoutdent
-		config_index=$((${config_index} + 1))
+		: $(( config_index += 1 ))
 	done
 
 	if ! ${oneworked}; then

init.d/netmount.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mounts network shares according to /etc/fstab."
 
@@ -35,7 +35,7 @@ depend()
 	need net $pmap
 	use afc-client amd autofs openvpn
 	use dns nfs nfsmount portmap rpcbind rpc.statd rpc.lockd
-	keyword -jail -prefix -vserver
+	keyword -jail -vserver
 }
 
 start()
@@ -44,7 +44,7 @@ start()
 	[ -x @SYSCONFDIR@/init.d/rpcbind ] && pmap="rpcbind"
 
 	local x= fs= rc=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		case "$x" in
 			nfs|nfs4)
 			# If the nfsmount script took care of the nfs
@@ -81,7 +81,7 @@ stop()
 	ebegin "Unmounting network filesystems"
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		fs="$fs${fs:+,}$x"
 	done
 	if [ -n "$fs" ]; then
@@ -90,7 +90,7 @@ stop()
 
 	eindent
 	fs=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"

init.d/network.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # This script was inspired by the equivalent rc.d network from NetBSD.
 
@@ -13,7 +13,7 @@ depend()
 	need localmount
 	after bootmisc
 	provide net
-	keyword -jail -prefix -vserver
+	keyword -jail -vserver
 }
 
 uniqify()
@@ -219,6 +219,12 @@ start()
 		eend $?
 	fi
 
+	ewarn
+	ewarn "The $RC_SVCNAME script is deprecated and will be"
+	ewarn "removed in the future."
+	ewarn "Please use the net.* scripts to manage your network interfaces."
+	ewarn
+
 	einfo "Starting network"
 	routeflush
 	if [ "$RC_UNAME" = "Linux" ]; then
@@ -281,7 +287,7 @@ start()
 		tentative || break
 		[ $r = 5 ] && vebegin "Waiting for tentative addresses"
 		sleep 1
-		r=$(($r - 1))
+		: $(( r -= 1 ))
 	done
 	if [ $r != 5 ]; then
 		[ $r != 0 ]

init.d/newsyslog.in

@@ -1,13 +1,12 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 required_files="/etc/newsyslog.conf"
 
 depend()
 {
 	need localmount
-	keyword -prefix
 }
 
 start()

init.d/nscd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/nscd
 command_args=$nscd_args

init.d/numlock.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Turns numlock on for the consoles."
 
@@ -9,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	keyword -openvz -vserver -lxc
 }
 
 _setleds()
@@ -21,7 +21,7 @@ _setleds()
 
 	while [ $i -le $ttyn ]; do
 		setleds -D "$1"num < $dev$i || retval=1
-		i=$(($i + 1))
+		: $(( i += 1 ))
 	done
 
 	return $retval

init.d/pf.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 name="Packet Filter"
 : ${pf_conf:=${pf_rules:-/etc/pf.conf}}
@@ -11,7 +11,7 @@ extra_started_commands="reload"
 
 depend() {
 	need localmount
-	keyword -jail -prefix
+	keyword -jail
 }
 
 start()

init.d/powerd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/powerd
 command_args=$powerd_args
@@ -12,7 +12,7 @@ depend()
 	need localmount
 	use logger
 	after bootmisc
-	keyword -jail -prefix
+	keyword -jail
 }
 
 start_pre()

init.d/procfs.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mounts misc filesystems in /proc."
 
@@ -8,18 +8,41 @@ depend()
 {
 	use modules devfs
 	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	keyword -openvz -vserver -lxc
 }
 
 start()
 {
 	# Make sure we insert usbcore if it's a module
-	if [ -f /proc/modules -a ! -d /proc/bus/usb ]; then
+	if [ -f /proc/modules -a ! -d /sys/module/usbcore -a ! -d /proc/bus/usb ]; then
 		modprobe -q usbcore
 	fi
 
 	[ -e /proc/filesystems ] || return 0
 
+	# Setup Kernel Support for miscellaneous Binary Formats
+	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
+		if grep -qs binfmt_misc /proc/filesystems; then
+			ebegin "Mounting misc binary format filesystem"
+			mount -t binfmt_misc -o nodev,noexec,nosuid \
+				binfmt_misc /proc/sys/fs/binfmt_misc
+			if eend $? ; then
+				local fmts
+				ebegin "Loading custom binary format handlers"
+				fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
+					/run/binfmt.d/*.conf \
+					@SYSCONFDIR@/binfmt.d/*.conf \
+					""/usr/lib/binfmt.d/*.conf)
+				if [ -n "${fmts}" ]; then
+					echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
+				fi
+				eend $?
+			fi
+		fi
+	fi
+
+	[ "$RC_SYS" == "OPENVZ" ] && return 0
+
 	# Check what USB fs the kernel support.  Currently
 	# 2.5+ kernels, and later 2.4 kernels have 'usbfs',
 	# while older kernels have 'usbdevfs'.
@@ -37,27 +60,6 @@ start()
 		fi
 	fi
 
-	# Setup Kernel Support for the NFS daemon status
-	if [ -d /proc/fs/nfsd ] && ! mountinfo -q /proc/fs/nfsd; then
-		if grep -qs nfsd /proc/filesystems; then
-			ebegin "Mounting NFS filesystem"
-			mount -t nfsd -o nodev,noexec,nosuid \
-				nfsd /proc/fs/nfsd
-			eend $?
-		fi
-	fi
-
-	# Setup Kernel Support for miscellaneous Binary Formats
-	if [ -d /proc/sys/fs/binfmt_misc ] \
-		&& ! mountinfo -q /proc/sys/fs/binfmt_misc; then
-		if grep -qs binfmt_misc /proc/filesystems; then
-			ebegin "Mounting misc binary format filesystem"
-			mount -t binfmt_misc -o nodev,noexec,nosuid \
-				binfmt_misc /proc/sys/fs/binfmt_misc
-			eend $?
-		fi
-	fi
-
 	# Setup Kernel Support for SELinux
 	if [ -d /selinux ] && ! mountinfo -q /selinux; then
 		if grep -qs selinuxfs /proc/filesystems; then

init.d/rarpd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/rarpd
 command_args="-f $rarpd_args"

init.d/rc-enabled.in

@@ -1,13 +1,12 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 depend()
 {
 	need localmount net
 	after *
 	before local
-	keyword -prefix
 }
 
 start()
@@ -33,7 +32,7 @@ start()
 
 		# Good to go!
 		"$svc" start && started="$started $svc"
-		: $((retval += $?))
+		: $(( retval += $? ))
 	done
 	service_set_value started "$started"
 	eend $retval "Some local rc services failed to start"
@@ -46,7 +45,7 @@ stop()
 	local svc= retval=0
 	for svc in $(rcorder $(service_get_value started) 2>/dev/null | sort -r); do
 		"$svc" stop
-		: $((retval += $?))
+		: $(( retval += $? ))
 	done
 	eend $retval "Some local rc services failed to stop"
 	return 0

init.d/root.in

@@ -1,32 +1,53 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mount the root fs read/write"
 
 depend()
 {
 	need fsck
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword -jail -openvz -vserver -lxc
 }
 
 start()
 {
 	case ",$(fstabinfo -o /)," in
-	*,ro,*) return 0;;
+		*,ro,*)
+		;;
+		*)
+			# Check if the rootfs isn't already writable.
+			if checkpath -W /; then
+				rm -f /fastboot /forcefsck
+			else
+				ebegin "Remounting root filesystem read/write"
+				case "$RC_UNAME" in
+					Linux)
+						mount -n -o remount,rw /
+					;;
+					*)
+						mount -u -o rw /
+					;;
+				esac
+				eend $? "Root filesystem could not be mounted read/write"
+				if [ $?  -eq 0 ]; then
+					rm -f /fastboot /forcefsck
+				fi
+			fi
+		;;
 	esac
 
-	if echo 2>/dev/null >/.test.$$; then
+	ebegin "Remounting filesystems"
-		rm -f /.test.$$ /fastboot /forcefsck
+	local mountpoint
-		return 0
+	for mountpoint in $(fstabinfo); do
-	fi
+		case "${mountpoint}" in
-
+			/)
-	ebegin "Remounting root filesystem read/write"
+			;;
-	case "$RC_UNAME" in
+			/*)
-		Linux)	mount -n -o remount,rw /;;
+				mountinfo -q "${mountpoint}" && \
-		*)	mount -u -o rw /;;
+					fstabinfo --remount "${mountpoint}"
-	esac
+			;;
-	if eend $? "Root filesystem could not be mounted read/write"; then
+		esac
-		rm -f /fastboot /forcefsck
+	done
-	fi
+	eend 0
 }

init.d/rpcbind.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/rpcbind
 command_args=$rpcbind_args