typo fixes

Currently, we have the net virtual, so we should use it as the default
in this instance so that netmount comes up after it thinks the network
is up. However, this is technically eroneous, because there is no way to
know from the init system that we really have network connectivity.

Reported-by: cheepeero@gmx.net
X-Gentoo-Bug: 445116
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=445116

Makefile

@@ -4,7 +4,12 @@
 
 include Makefile.inc
 
-SUBDIR=		conf.d doc etc init.d local.d sysctl.d man net scripts sh src
+SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
+
+# Build our old net foo or not
+ifeq (${MKNET},oldnet)
+SUBDIR+=	net doc
+endif
 
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes
@@ -25,6 +30,10 @@ include ${MK}/dist.mk
 include ${MK}/git.mk
 
 _installafter:
+ifeq (${MKPREFIX},yes)
 	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
+else ifneq (${OS},Linux)
+	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
+endif
 	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/tmp
 	${ECHO} "${VERSION}${GITVER}" > ${DESTDIR}/${LIBEXECDIR}/version

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.9.9
+VERSION=	0.11.6
 PKG=		${NAME}-${VERSION}

README

@@ -10,7 +10,9 @@ You may wish to tweak the installation with the below arguments
 PROGLDFLAGS=-static
 LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
+MKNET=oldnet
 MKPAM=pam
+MKPREFIX=yes
 MKPKGCONFIG=no
 MKSELINUX=yes
 MKSTATICLIBS=no
@@ -24,6 +26,8 @@ We don't support building a static OpenRC with PAM.
 You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
 If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
 so that all malloc memory should be freed at exit.
+If you are building OpenRC for a Gentoo Prefix installation, add
+MKPREFIX=yes.
 
 You can also brand OpenRC if you so wish like so
 BRANDING=\"Gentoo/$(uname -s)\"

README.newnet

@@ -0,0 +1,40 @@
+The following applies only to the newnet stack, which is not presently
+maintained in OpenRC. The oldnet stack is maintained instead.
+- Robin H. Johnson <robbat2@gentoo.org>, 2011/02/21
+
+OpenRC Network Ideals
+---------------------
+
+The new style networking for OpenRC is very simplistic - provide a basic means
+of configuring static interface address and routes whilst allowing the
+possibility to run any command at any point.
+
+In a nutshell, init.d/network is a wrapper around ifconfig(8) and
+init.d/staticroute is wrapper around route(8).
+
+In the Perfect World (TM) ifconfig should be able to configure everything
+about the interface easily * . The BSD family almost get this right and Linux
+epically fails.
+
+* Only static configuration, including link setup.
+For dynamic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
+provides your needs.
+
+It fails because there are many tools to do the same job and often have
+vastly different syntax where they could be similar. In other words, there
+is no coherence.
+
+OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
+for each tool and allowed a script per interface. Over the years, this design
+has proven very hard to maintain as each user has their own idea of how
+things should work. Also, there were (and still are) race conditions.
+
+So where do we go from here?
+Well, it's possible to use the new network scripts using the tools
+currently available. It's just harder as you have to know them and their
+documentation can be lacking at times.
+The correct end goal is a BSD style ifconfig tool.
+I've started work on it, but the project has stalled somewhat.
+It's display only right now and the source is not yet publicly available.
+If you have the skills and share the vision then contact me privately and
+we'll take it from there.

conf.d/Makefile

@@ -1,9 +1,12 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount network staticroute urandom \
+CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
-	${CONF-${OS}}
+		${CONF-${OS}}
 
+ifeq (${MKNET},)
+CONF+= network staticroute
 TARGETS+=	network staticroute
 CLEANFILES+=	network staticroute
+endif
 
 MK=	../mk
 include ${MK}/os.mk

conf.d/consolefont

@@ -1,9 +1,10 @@
+# The consolefont service is not activated by default. If you need to
+# use it, you should run "rc-update add consolefont boot" as root.
+#
 # consolefont specifies the default font that you'd like Linux to use on the
 # console.  You can find a good selection of fonts in /usr/share/consolefonts;
 # you shouldn't specify the trailing ".psf.gz", just the font name below.
 # To use the default console font, comment out the CONSOLEFONT setting below.
-# This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
-# not want to use it, run "rc-update del consolefont boot" as root).
 consolefont="default8x16"
 
 # consoletranslation is the charset map file to use.  Leave commented to use

conf.d/dmesg

@@ -1,3 +1,3 @@
 # Sets the level at which logging of messages is done to the
-# console.  See dmesg(8) for more info.
+# console.  See dmesg(1) for more info.
 dmesg_level="1"

conf.d/netmount

@@ -0,0 +1,40 @@
+# You will need to set the dependencies in the netmount script to match
+# the network configuration tools you are using. This should be done in
+# this file by following the examples below, and not by changing the
+# service script itself.
+#
+# Each of these examples is meant to be used separately. So, for
+# example, do not set rc_need to something like "net.eth0 dhcpcd".
+#
+# If you are using newnet and configuring your interfaces with static
+# addresses with the network script, you  should use this setting.
+#
+#rc_need="network"
+#
+# If you are using oldnet, you must list the specific net.* services you
+# need.
+#
+# This example assumes all of your netmounts can be reached on
+# eth0.
+#
+#rc_need="net.eth0"
+#
+# This example assumes some of your netmounts are on eth1 and some
+# are on eth2.
+#
+#rc_need="net.eth1 net.eth2"
+#
+# If you are using a dynamic network management tool like
+# networkmanager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
+# manage the network interfaces with the routes to your netmounts, you
+# should list that tool.
+#
+#rc_need="networkmanager"
+#rc_need="dhcpcd"
+#rc_need="wicd"
+#
+# The default setting is designed to be backward compatible with our
+# current setup, but you are highly discouraged from using this. In
+# other words, please change it to be more suited to your system.
+#
+rc_need="net"

conf.d/tmpfiles

@@ -0,0 +1,3 @@
+# Extra options for tmpfiles.sh
+#tmpfiles_opts="--verbose"
+tmpfiles_opts=""

doc/net.example.BSD.in

@@ -80,9 +80,9 @@
 # Most drivers that report carrier status function correctly, but some do not
 # One of these faulty drivers is for the Intel e1000 network card, but only
 # at boot time. To get around this you may alter the carrier_timeout value for
-# the interface. -1 is disable, 0 is infinite and any other number of seconds
+# the interface. 0 is disable and any other number of seconds is how
-# is how long we wait for carrier. The current default is 3 seconds
+# long we wait for carrier. The current default is disabled.
-#carrier_timeout_eth0=-1
+#carrier_timeout_eth0=0
 
 # You may wish to disable the interface being brought down when stopping.
 # This is only of use for WakeOnLan.

doc/net.example.Linux.in

@@ -34,7 +34,7 @@
 # In other words, you probably should DO NOTHING HERE...
 
 # Prefer ifconfig over iproute2
-#modules="ifconfig"
+#modules="!iproute2"
 
 # You can also specify other modules for an interface
 # In this case we prefer udhcpc over dhcpcd
@@ -57,7 +57,7 @@
 
 # If you don't specify an interface then we prefer iproute2 if it's installed
 # To prefer ifconfig over iproute2
-#modules="ifconfig"
+#modules="!iproute2"
 
 # For a static configuration, use something like this
 # (They all do exactly the same thing btw)
@@ -126,6 +126,13 @@
 # tables you may have to set a global metric as the due to a simple read of
 # the routing table taking over a minute at a time.
 
+# Most drivers that report carrier status function correctly, but some do not
+# One of these faulty drivers is for the Intel e1000 network card, but only
+# at boot time. To get around this you may alter the carrier_timeout value for
+# the interface. 0 is disable and any other number of seconds is how
+# long we wait for carrier. The current default is disabled.
+#carrier_timeout_eth0=0
+
 # You may wish to disable the interface being brought down when stopping.
 # This is only of use for WakeOnLan.
 #ifdown_eth0="NO"
@@ -552,26 +559,34 @@
 # You can also configure the VLAN - see for ip man page for more details
 # To change the vlan interface name. If not set, the standard "iface.vlanid"
 # will be used. This is the replacement for the old 'vconfig set_name_type'
-# functionality.
+# functionality. If you previously relied on the DEV_PLUS_VID or
+# DEV_PLUS_VID_NO_PAD options to have different VLANs with same ID value, on
+# different interfaces, please note that you need to use both the interface and
+# vlan number in the numbering. This applies for all of the options: name,
+# txqueuelen, mac, broadcast, mtu, ingress, egress, flags
 #vlan1_name="vlan1"
-#vlan2_name="eth0.2"
+#eth0_vlan2_name="eth0.2"
+#eth1_vlan2_name="eth1.2"
 
 # The following shows the old set_name_type setting and what new option to set:
 # Using eth9 & VLAN VID 26 as an example.
 # VLAN_PLUS_VID         vlan26_name="vlan0026"
 # VLAN_PLUS_VID_NO_PAD  vlan26_name="vlan26"
-# DEV_PLUS_VID          vlan26_name="eth9.0026"
+# DEV_PLUS_VID          eth9_vlan26_name="eth9.0026"
-# DEV_PLUS_VID_NO_PAD   vlan26_name="eth9.26"
+# DEV_PLUS_VID_NO_PAD   eth9_vlan26_name="eth9.26"
 
 # Set the vlan flags
 #vlan1_flags="reorder_hdr off gvrp on loose_binding on"
+#eth0_vlan1_flags="reorder_hdr off gvrp on loose_binding on"
 
 # Configure in/egress maps
 #vlan1_ingress="2:6 3:5"
-#vlan1_egress="1:2"
+#eth0_vlan1_egress="1:2"
 
-#config_vlan1="172.16.3.1/23"
+#config_vlan1="172.16.2.1/24"
-#config_vlan2="172.16.2.1/23"
+#config_vlan2="172.16.3.1/24"
+#config_eth0_1="172.16.4.1/24"
+#config_eth1_1="172.16.5.1/24"
 
 # NOTE: Vlans can be configured with a . in their interface names
 # When configuring vlans with this name type, you need to replace . with a _
@@ -616,15 +631,39 @@
 #slaves_bond0="eth0 eth1 eth2"
 #config_bond0="null" # You may not want to assign an IP the the bond
 
-# You can also configure the bond here, which must be done via sysfs on 2.6
+# Please note, that you should generally NOT try to change the MAC addresses of
-# kernels or newer. See the kernel bonding documentation for a description of
+# a bond interface yourself. If you do so, the kernel and your network switches
-# these options.
+# may not work quite right. It is permissible to set the MAC addresses of bond
+# slaves BEFORE the bond comes up, but not after the bond is up (it will change
+# MAC addresses of the slaves on it's own).
+
+# You can also configure the parameters of the bond here, which must be done
+# via sysfs on 2.6 kernels or newer. The description of all the options can be
+# found in the kernel: /usr/src/linux-*/Documentation/networking/bonding.txt
+# You will probably want the 'mode' option at the least.
+# Some possible parameters: mode fail_over_mac arp_validate arp_interval
+# arp_ip_target downdelay updelay lacp_rate ad_select xmit_hash_policy
+# num_grat_arp num_unsol_na miimon primary primary_reselect use_carrier
+# active_slave queue_id all_slaves_active resend_igmp min_links
+#mode_bond0="round-robin"
+#miimon_bond0="100"
 #arp_ip_target_bond0="+26.0.0.0"
 
 # If any of the slaves require extra configuration - for example wireless or
 # ppp devices - we need to depend function on the bonded interfaces
 #rc_net_bond0_need="net.eth0 net.eth1"
 
+# Bonding subsume support (prevents crashes for root-on-NFS)
+#  - Only tested in the default bonding mode ('active-backup') with
+# IPv4
+#  - Only subsumes basic interface characteristics (IP, netmask) and
+#    excludes additional routes, interface properties such as MTU,
+#    interface-associated netfilter rules, etc.
+# In the example below, the (usually kernel-autoconfigured)
+# 'eth0' interface is a member of bond0, which subsumes the
+# existing interface configuration without upsetting NFS.
+#slaves_bond0="eth0 eth1"
+#subsume_bond0="eth0"
 
 #-----------------------------------------------------------------------------
 # Classical IP over ATM
@@ -780,6 +819,8 @@
 
 #-----------------------------------------------------------------------------
 # MAC changer
+# Warning: Do NOT use this on bonding interfaces! Bonding changes MACs itself.
+#
 # To set a specific MAC address
 #mac_eth0="00:11:22:33:44:55"
 
@@ -1096,6 +1137,13 @@
 # Hypothetical network card that requires a change-eeprom toggle to enable flashing
 #ethtool_order_eth0="change-eeprom flash change pause coalesce ring offload nfc rxfh-indir ntuple"
 
+#-----------------------------------------------------------------------------
+# Firewalld support
+# If you are using the firewalld daemon to configure your firewall
+# settings and you have specific zones you want to apply to your
+# interfaces, you can do this here.
+#firewalld_zone_eth0="myzone"
+
 ##############################################################################
 # ADVANCED CONFIGURATION
 #

etc/rc.conf.FreeBSD

@@ -4,6 +4,7 @@
 # This is the subsystem type. Valid options on FreeBSD:
 # ""        - nothing special
 # "jail"    - FreeBSD jails
+# "prefix"  - Prefix
 # If this is commented out, automatic detection will be used.
 #
 # This should be set to the value representing the environment this file is

etc/rc.conf.Linux

@@ -5,6 +5,7 @@
 # ""        - nothing special
 # "lxc"     - Linux Containers
 # "openvz"  - Linux OpenVZ
+# "prefix"  - Prefix
 # "uml"     - Usermode Linux
 # "vserver" - Linux vserver
 # "xen0"    - Xen0 Domain
@@ -18,3 +19,11 @@
 # This is the number of tty's used in most of the rc-scripts (like
 # consolefont, numlock, etc ...)
 rc_tty_number=12
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controler is mounted under
+# /sys/fs/cgroup.
+# Support for process management by cgroups is planned in the future,
+# so if you turn this off, be aware that you may not be able to use that
+# feature.
+#rc_controller_cgroups="YES"

etc/rc.conf.NetBSD

@@ -3,6 +3,7 @@
 
 # This is the subsystem type. Valid options on NetBSD:
 # ""        - nothing special
+# "prefix"  - Prefix
 # "xen0"    - Xen0 Domain
 # "xenU"    - XenU Domain
 # If this is commented out, automatic detection will be used.

etc/rc.conf.in

@@ -94,6 +94,10 @@
 # These variables are documented here, but should be configured in
 # /etc/conf.d/foo for service foo and NOT enabled here unless you
 # really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
 
 # Some daemons are started and stopped via start-stop-daemon.
 # We can set some things on a per service basis, like the nicelevel.
@@ -116,6 +120,13 @@
 #rc_foo_need="openvpn"
 #rc_foo_after="clock"
 
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
 # You can also remove dependencies.
 # This is mainly used for saying which servies do NOT provide net.
 #rc_net_tap0_provide="!net"

init.d/.gitignore

@@ -41,3 +41,4 @@ syslogd
 termencoding
 ttys
 wscons
+tmpfiles.setup

init.d/Makefile

@@ -1,12 +1,18 @@
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
-	network.in root.in savecache.in staticroute.in swap.in swapfiles.in \
+	root.in savecache.in swap.in swapfiles.in \
-	swclock.in sysctl.in urandom.in ${SRCS-${OS}}
+	tmpfiles.setup.in swclock.in sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
+# Build our old net foo or not
+ifeq (${MKNET},)
+SRCS+= network.in staticroute.in
+endif
+
+ifeq (${MKNET},oldnet)
 INSTALLAFTER=	_installafter_net.lo
-CLEANFILES+=	net.lo
+SRCS+= net.lo.in
-TARGETS+=	net.lo
+endif
 
 MK=	../mk
 include ${MK}/os.mk
@@ -16,8 +22,8 @@ NET_LO-FreeBSD=	net.lo0
 SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 		rpcbind.in savecore.in syslogd.in
 # These are FreeBSD specific
-SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
+SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
-		powerd.in syscons.in
+		mixer.in nscd.in powerd.in syscons.in
 
 NET_LO-Linux=	net.lo
 SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \

init.d/adjkerntz.in

@@ -22,7 +22,7 @@ depend()
 	   [ "$clock" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
 		need root
 	fi
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start()

init.d/bootmisc.in

@@ -7,7 +7,7 @@ depend()
 	need localmount
 	before logger
 	after clock sysctl
-	keyword -timeout
+	keyword -prefix -timeout
 }
 
 : ${wipe_tmp:=${WIPE_TMP:-yes}}
@@ -112,7 +112,7 @@ start()
 		fi
 	done
 
-	if [ "$RC_UNAME" = Linux -a -d /run ] && false; then
+	if [ "$RC_UNAME" = Linux -a -d /run ]; then
 		migrate_to_run	/var/lock /run/lock
 		migrate_to_run	/var/run /run
 	fi
@@ -196,3 +196,5 @@ stop()
 
 	return 0
 }
+
+# vim: ft=sh

init.d/consolefont.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc
-	keyword -openvz -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()

init.d/devd.in

@@ -10,7 +10,7 @@ depend() {
 	need localmount
 	after bootmisc
 	before net.lo0
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start_pre() {

init.d/devfs.in

@@ -5,8 +5,9 @@
 description="Mount system critical filesystems in /dev."
 
 depend() {
-	use dev
+	use dev-mount
-	keyword -vserver
+	before dev
+	keyword -prefix -vserver
 }
 
 start() {

init.d/dmesg.in

@@ -7,7 +7,7 @@ description="Set the dmesg level for a cleaner boot"
 depend()
 {
 	before dev modules
-	keyword -vserver
+	keyword -lxc -prefix -vserver
 }
 
 start()

init.d/dumpon.in

@@ -6,7 +6,7 @@ description="Configures a specific kernel dump device."
 
 depend() {
 	need swap
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start() {

init.d/encswap.in

@@ -0,0 +1,43 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 1992-2012 FreeBSD Project
+# Released under the 2-clause BSD license
+
+depend() {
+	before swap
+}
+
+start() {
+	while read device mountpoint type options rest ; do
+		case ":${device}:${type}:${options}" in
+		:#*)
+			;;
+		*.bde:swap:sw)
+			passphrase=$(dd if=/dev/random count=1 2>/dev/null | md5 -q)
+			device="${device%.bde}"
+			gbde init "${device}" -P "${passphrase}" || return 1
+			gbde attach "${device}" -p "${passphrase}" || return 1
+			;;
+		*.eli:swap:sw)
+			device="${device%.eli}"
+			geli onetime ${geli_swap_flags} "${device}" || return 1
+			;;
+		esac
+	done < /etc/fstab
+}
+
+stop() {
+	while read device mountpoint type options rest ; do
+		case ":${device}:${type}:${options}" in
+		:#*)
+			;;
+		*.bde:swap:sw)
+			device="${device%.bde}"
+			gbde detach "${device}"
+			;;
+		*.eli:swap:sw)
+			# Nothing here, because geli swap devices should be
+			# created with the auto-detach-on-last-close option.
+			;;
+		esac
+	done < /etc/fstab
+}

init.d/fsck.in

@@ -9,7 +9,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -timeout -vserver -lxc
+	keyword -jail -openvz -prefix -timeout -vserver -lxc
 }
 
 _abort() {
@@ -71,7 +71,12 @@ start()
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
-		fsck_opts="$fsck_opts -C0 -T"
+		local skiptypes x
+		for x in $net_fs_list $extra_net_fs_list; do
+			skiptypes="${skiptypes}no${x},"
+		done
+		skiptypes="${skiptypes}noopts=_netdev"
+		fsck_opts="$fsck_opts -C0 -T -t $skiptypes"
 		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
 			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then

init.d/hostid.in

@@ -9,7 +9,7 @@ depend()
 {
 	use root
 	before devd net
-	keyword -jail
+	keyword -jail -prefix
 }
 
 _set()

init.d/hostname.in

@@ -5,7 +5,7 @@
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -lxc
+	keyword -prefix -lxc
 }
 
 start()

init.d/hwclock.in

@@ -28,7 +28,7 @@ depend()
 	else
 		before *
 	fi
-	keyword -openvz -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 setupopts()

init.d/keymaps.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()

init.d/killprocs.in

@@ -4,6 +4,11 @@
 
 description="Kill all processes so we can unmount disks cleanly."
 
+depend()
+{
+	keyword -prefix
+}
+
 start()
 {
 	ebegin "Terminating remaining processes"

init.d/localmount.in

@@ -9,7 +9,7 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -jail -openvz -vserver -lxc
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()
@@ -22,6 +22,9 @@ start()
 
 	if [ "$RC_UNAME" = Linux ]; then
 		no_netdev="-O no_netdev"
+		if mountinfo -q /usr; then
+			touch $RC_SVCDIR/usr_premounted
+		fi
 	fi
 	ebegin "Mounting local filesystems"
 	mount -at "$types" $no_netdev
@@ -33,6 +36,7 @@ start()
 
 stop()
 {
+	yesno $RC_GOINGDOWN || return 0
 	# We never unmount / or /dev or $RC_SVCDIR
 
 	# Bug 381783
@@ -48,6 +52,9 @@ stop()
 
 	if [ "$RC_UNAME" = Linux ]; then
 		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
+		if [ -e $rc_svcdir/usr_premounted ]; then
+			no_umounts_r="$no_umounts_r|/usr"
+		fi
 	fi
 	no_umounts_r="^($no_umounts_r)$"
 

init.d/mixer.in

@@ -7,7 +7,7 @@ extra_commands="restore"
 depend()
 {
 	need localmount
-	keyword -jail
+	keyword -jail -prefix
 }
 
 restore()

init.d/modules.in

@@ -7,7 +7,7 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword -openvz -vserver -lxc
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/mount-ro.in

@@ -7,11 +7,13 @@ description="Re-mount filesytems read-only for a clean reboot."
 depend()
 {
 	need killprocs savecache
-	keyword -openvz -vserver -lxc
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()
 {
+	local ret=0
+
 	# Flush all pending disk writes now
 	sync; sync
 
@@ -23,7 +25,7 @@ start()
 	# Bug 381783
 	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
 
-	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${rc_svcdir}" x= fs=
+	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
 	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
 	local IFS="$IFS:"
@@ -39,6 +41,9 @@ start()
 	do_unmount "umount -r" \
 		--skip-point-regex "$m" \
 		"${fs:+--skip-fstype-regex}" $fs --nonetdev
+	ret=$?
+
 	eoutdent
-	eend $?
+
+	eend $ret
 }

init.d/moused.in

@@ -16,7 +16,7 @@ depend()
 {
 	need localmount
 	after bootmisc
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start()

init.d/mtab.in

@@ -7,6 +7,7 @@ description="Update /etc/mtab to match what the kernel knows about"
 depend()
 {
 	need root
+	keyword -prefix
 }
 
 start()

init.d/net.lo.in

@@ -19,11 +19,14 @@ depend()
 	local IFVAR=$(shell_var "${IFACE}")
 
 	need localmount
+	if [ "$RC_UNAME" = Linux -a "$IFACE" != lo ]; then
+		need sysfs
+	fi
 	after bootmisc
-	keyword -jail -vserver
+	keyword -jail -prefix -vserver
 
 	case "${IFACE}" in
-		lo|lo0) provide lo;;
+		lo|lo0) ;;
 		*)
 			after net.lo net.lo0 dbus
 			provide net
@@ -105,7 +108,7 @@ _wait_for_carrier()
 	_has_carrier  && return 0
 
 	eval timeout=\$carrier_timeout_${IFVAR}
-	timeout=${timeout:-${carrier_timeout:-5}}
+	timeout=${timeout:-${carrier_timeout:-0}}
 
 	# Incase users don't want this nice feature ...
 	[ ${timeout} -le 0 ] && return 0

init.d/netmount.in

@@ -2,62 +2,26 @@
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-description="Mounts network shares according to /etc/fstab."
+description="Mounts network shares, other than NFS, according to /etc/fstab."
-
+# We skip all NFS shares in this script because they require extra
-need_portmap()
+# daemons to be running on the client in order to work correctly.
-{
+# It is best to allow nfs-utils to handle all nfs shares.
-	local opts=
-	local IFS="
-"
-	set -- $(fstabinfo --options --fstype nfs,nfs4)
-	for opts; do
-		case ,$opts, in
-			*,noauto,*|*,nolock,*);;
-			*) return 0;;
-		esac
-	done
-	return 1
-}
 
 depend()
 {
-	# Only have portmap as a dependency if there is a nfs mount in fstab
-	# that is set to mount at boot
-	local pmap=
-	if need_portmap; then
-		pmap="rpc.statd"
-		[ -x @SYSCONFDIR@/init.d/rpcbind ] \
-			&& pmap="$pmap rpcbind" \
-			|| pmap="$pmap portmap"
-	fi
-
 	config /etc/fstab
-	need net $pmap
 	use afc-client amd autofs openvpn
-	use dns nfs nfsmount portmap rpcbind rpc.statd rpc.lockd
+	use dns
-	keyword -jail -vserver
+	keyword -jail -prefix -vserver
 }
 
 start()
 {
-	local myneed= myuse= pmap="portmap" nfsmounts=
-	[ -x @SYSCONFDIR@/init.d/rpcbind ] && pmap="rpcbind"
-
 	local x= fs= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
 		case "$x" in
 			nfs|nfs4)
-			# If the nfsmount script took care of the nfs
+			continue
-			# filesystems, then there's no point in trying
-			# them twice
-			service_started nfsmount && continue
-
-			# Only try to mount NFS filesystems if portmap was
-			# started. This is to fix "hang" problems for new
-			# users who do not add portmap to the default runlevel.
-			if need_portmap && ! service_started "$pmap"; then
-				continue
-			fi
 			;;
 		esac
 		fs="$fs${fs:+,}$x"
@@ -82,7 +46,14 @@ stop()
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
 	for x in $net_fs_list $extra_net_fs_list; do
-		fs="$fs${fs:+,}$x"
+		case "$x" in
+			nfs|nfs4)
+				continue
+				;;
+			*)
+				fs="$fs${fs:+,}$x"
+				;;
+		esac
 	done
 	if [ -n "$fs" ]; then
 		umount -at $fs || eerror "Failed to simply unmount filesystems"
@@ -91,7 +62,14 @@ stop()
 	eindent
 	fs=
 	for x in $net_fs_list $extra_net_fs_list; do
-		fs="$fs${fs:+|}$x"
+		case "$x" in
+			nfs|nfs4)
+				continue
+				;;
+			*)
+				fs="$fs${fs:+|}$x"
+				;;
+		esac
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount umount ${fs:+--fstype-regex} $fs --netdev

init.d/network.in

@@ -12,8 +12,10 @@ depend()
 {
 	need localmount
 	after bootmisc
-	provide net
+	if [ -n "$(interfaces)" ]; then
-	keyword -jail -vserver
+		provide net
+	fi
+	keyword -jail -prefix -vserver
 }
 
 uniqify()
@@ -219,12 +221,6 @@ start()
 		eend $?
 	fi
 
-	ewarn
-	ewarn "The $RC_SVCNAME script is deprecated and will be"
-	ewarn "removed in the future."
-	ewarn "Please use the net.* scripts to manage your network interfaces."
-	ewarn
-
 	einfo "Starting network"
 	routeflush
 	if [ "$RC_UNAME" = "Linux" ]; then

init.d/newsyslog.in

@@ -7,6 +7,7 @@ required_files="/etc/newsyslog.conf"
 depend()
 {
 	need localmount
+	keyword -prefix
 }
 
 start()

init.d/numlock.in

@@ -9,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -openvz -vserver -lxc
+	keyword -openvz -prefix -vserver -lxc
 }
 
 _setleds()

init.d/pf.in

@@ -11,7 +11,7 @@ extra_started_commands="reload"
 
 depend() {
 	need localmount
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start()

init.d/powerd.in

@@ -12,7 +12,7 @@ depend()
 	need localmount
 	use logger
 	after bootmisc
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start_pre()

init.d/procfs.in

@@ -8,7 +8,7 @@ depend()
 {
 	use modules devfs
 	need localmount
-	keyword -openvz -vserver -lxc
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()
@@ -41,7 +41,7 @@ start()
 		fi
 	fi
 
-	[ "$RC_SYS" == "OPENVZ" ] && return 0
+	[ "$RC_SYS" = "OPENVZ" ] && return 0
 
 	# Check what USB fs the kernel support.  Currently
 	# 2.5+ kernels, and later 2.4 kernels have 'usbfs',

init.d/rc-enabled.in

@@ -7,6 +7,7 @@ depend()
 	need localmount net
 	after *
 	before local
+	keyword -prefix
 }
 
 start()

init.d/root.in

@@ -7,7 +7,7 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword -jail -openvz -vserver -lxc
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/savecache.in

@@ -13,6 +13,14 @@ start()
 			return 1
 		fi
 	fi
+	if ! checkpath -W "$RC_LIBEXECDIR"; then
+		ewarn "WARNING: ${RC_LIBEXECDIR} is not writable!"
+		if ! yesno "${RC_GOINGDOWN}"; then
+			ewarn "Unable to save deptree cache"
+			return 1
+		fi
+		return 0
+	fi
 	ebegin "Saving dependency cache"
 	local rc=
 	if [ ! -d "$RC_LIBEXECDIR"/cache ]; then

init.d/savecore.in

@@ -6,8 +6,9 @@ description="Saves a kernel dump."
 
 depend()
 {
-	need localmount
+	need dumpon localmount
-	keyword -jail
+	before encswap
+	keyword -jail -prefix
 }
 
 start()

init.d/staticroute.in

@@ -12,7 +12,7 @@ depend()
 {
 	provide net
 	use network
-	keyword -jail -vserver
+	keyword -jail -prefix -vserver
 }
 
 pre_flight_checks()
@@ -93,11 +93,6 @@ do_routes()
 
 start()
 {
-	ewarn
-	ewarn "The $RC_SVCNAME script is deprecated and will be"
-	ewarn "removed in the future."
-	ewarn "Please use the net.* scripts to manage your network interfaces."
-	ewarn
 	do_routes "Adding" "add"
 }
 

init.d/swap-blk.in

@@ -5,7 +5,7 @@
 depend()
 {
 	before fsck
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start()

init.d/swap.in

@@ -5,7 +5,7 @@
 depend()
 {
 	before localmount
-	keyword -jail -openvz -vserver -lxc
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/swapfiles.in

@@ -31,14 +31,16 @@ stop()
 
 	case "$RC_UNAME" in
 		Linux)
-			while read filename type rest; do
+			if [ -e /proc/swaps ]; then
-				case "$type" in
+				while read filename type rest; do
-					file) swapoff $filename >/dev/null;;
+					case "$type" in
-				esac
+						file) swapoff $filename >/dev/null;;
-				case "$filename" in
+					esac
-					/dev/loop*) swapoff $filename >/dev/null;;
+					case "$filename" in
-				esac
+						/dev/loop*) swapoff $filename >/dev/null;;
-			done < /proc/swaps
+					esac
+				done < /proc/swaps
+			fi
 			;;
 	esac
 	eend 0

init.d/swclock.in

@@ -8,7 +8,7 @@ depend()
 {
 	before *
 	provide clock
-	keyword -openvz -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 # swclock is an OpenRC built in

init.d/syscons.in

@@ -4,7 +4,7 @@
 
 depend() {
 	need localmount
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start() {

init.d/sysctl.BSD.in

@@ -5,6 +5,7 @@
 depend()
 {
 	before bootmisc logger
+	keyword -prefix
 }
 
 start()
@@ -13,7 +14,7 @@ start()
 	local retval=0 var= comments= conf=
 	ebegin "Configuring kernel parameters"
 	eindent
-	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
 		if [ -r "$conf" ]; then
 			vebegin "applying $conf"
 			while read var comments; do

init.d/sysctl.Linux.in

@@ -5,7 +5,7 @@
 depend()
 {
 	before bootmisc logger
-	keyword -vserver
+	keyword -lxc -prefix -vserver
 }
 
 start()
@@ -15,12 +15,12 @@ start()
 	ebegin "Configuring kernel parameters"
 	eindent
 
-	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
 		if [ -r "$conf" ]; then
 			vebegin "applying $conf"
-			if ! err=$(sysctl -q -p "$conf" 2>&1) ; then
+			if ! err=$(sysctl -p "$conf" 2>&1 >/dev/null) ; then
 				errs="${errs} ${err}"
-				sysctl -q -e -p "${conf}"
+				sysctl -e -p "${conf}" >/dev/null
 			fi
 			veend $? || retval=1
 		fi

init.d/sysfs.in

@@ -6,7 +6,7 @@ description="Mount the sys filesystem."
 
 depend()
 {
-	keyword -vserver
+	keyword -lxc -prefix -vserver
 }
 
 mount_sys()
@@ -74,7 +74,6 @@ mount_misc()
 
 mount_cgroups()
 {
-	yesno ${rc_cgroups:-YES} && [ -e /proc/cgroups ] && \
 		mountinfo -q /sys/fs/cgroup || return 0
 
 	local agent="@LIBEXECDIR@/sh/cgroup-release-agent.sh"
@@ -83,6 +82,8 @@ mount_cgroups()
 		-o none,nodev,noexec,nosuid,name=openrc,release_agent="$agent" \
 		openrc /sys/fs/cgroup/openrc
 	echo 1 > /sys/fs/cgroup/openrc/notify_on_release
+
+	yesno ${rc_controller_cgroups:-YES} && [ -e /proc/cgroups ] || return 0
 	while read name hier groups enabled rest; do
 		case "${enabled}" in
 			1)	mkdir /sys/fs/cgroup/${name}

init.d/syslogd.in

@@ -16,4 +16,5 @@ depend()
 	use net newsyslog
 	need localmount
 	after bootmisc
+	keyword -prefix
 }

init.d/termencoding.in

@@ -9,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
-	keyword -openvz -uml -vserver -xenu
+	keyword -lxc -openvz -prefix -uml -vserver -xenu
 	use root
 	after bootmisc
 }

init.d/tmpfiles.setup.in

@@ -0,0 +1,18 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Released under the 2-clause BSD license.
+
+description="set up tmpfiles.d entries"
+
+depend()
+{
+	need localmount
+}
+
+start()
+{
+	ebegin "setting up tmpfiles.d entries"
+	@LIBEXECDIR@/sh/tmpfiles.sh --create --remove ${tmpfiles_opts}
+	eend $?
+	return 0
+}

init.d/ttys.in

@@ -5,6 +5,7 @@
 depend()
 {
 	after fsck
+	keyword -prefix
 }
 
 start()

init.d/urandom.in

@@ -8,7 +8,7 @@ description="Initializes the random number generator."
 depend()
 {
 	need localmount
-	keyword -jail -openvz
+	keyword -jail -lxc -openvz -prefix
 }
 
 save_seed()

init.d/wscons.in

@@ -5,6 +5,7 @@
 depend()
 {
 	need localmount
+	keyword -prefix
 }
 
 start()

man/rc-status.8

@@ -46,7 +46,7 @@ Show all runlevels and their services.
 List all services that have crashed.
 .It Fl l , -list
 List all defined runlevels.
-.It fl r , -runlevel
+.It Fl r , -runlevel
 Print the current runlevel name.
 .It Fl s , -servicelist
 Show all services.

man/runscript.8

@@ -37,7 +37,7 @@
 .Op Ar command ...
 .Sh DESCRIPTION
 .Nm
-is basically an interpreter for shell scripts which provide an easy interface
+is basically an interpreter for shell scripts which provides an easy interface
 to the often complex system commands and daemons.
 When a service runs a command it first loads its multiplexed configuration
 file, then its master configuration file, then
@@ -124,6 +124,10 @@ Display name used for the above defined command.
 .It Ar retry
 Retry schedule to use when stopping the daemon. It can either be a
 timeout in seconds or multiple signal/timeout pairs (like SIGTERM/5).
+.It Ar required_dirs
+A list of directories which must exist for the service to start.
+.It Ar required_files
+A list of files which must exist for the service to start.
 .El
 .Sh DEPENDENCIES
 You should define a
@@ -152,7 +156,7 @@ We provide this virtual service. For example, named provides dns.
 .It Ic config
 We should recalculate our dependencies if the listed files have changed.
 .It Ic keyword
-Tags a service with a keyword. Here's the keywords we currently understand:-
+Tags a service with a keyword. These are the keywords we currently understand:
 .Bl -tag -width indent
 .It Dv -shutdown
 Don't stop this service when shutting the system down.
@@ -176,6 +180,8 @@ in
 Same as -jail, but for Linux Resource Containers (LXC).
 .It Dv -openvz
 Same as -jail, but for OpenVZ systems.
+.It Dv -prefix
+Same as -jail, but for Prefix systems.
 .It Dv -uml
 Same as -jail, but for UML systems.
 .It Dv -vserver
@@ -346,8 +352,14 @@ Default runlevel chosen. Default is default.
 .It Va RC_SYS
 A special variable to describe the system more.
 Possible values are OPENVZ, XENU, XEN0, UML and VSERVER.
+.It Va RC_PREFIX
+In a Gentoo Prefix installation, this variable contains the prefix
+offset. Otherwise it is undefined.
 .It Va RC_UNAME
 The result of `uname -s`.
+.It Va RC_CMD
+This contains the name of the command the service script is executing, such
+as start, stop, restart etc.
 .El
 .Sh FILES
 .Pp
@@ -384,8 +396,9 @@ rc_provide_tap1="!net"
 # To put in in /etc/rc.conf you would do it like this
 rc_net_tap1_provide="!net"
 
-# It's also possible to negate keywords.
+# It's also possible to negate keywords. This is mainly useful for prefix
-rc_keyword="-keyword"
+# users testing OpenRC.
+rc_keyword="!-prefix"
 .Ed
 .Sh EXAMPLES
 .Pp
@@ -434,8 +447,22 @@ depend()
     need ${_need}
 }
 
+# This function does any pre-start setup. If it fails, the service will
+# not be started.
+# If you need this function to behave differently for a restart command,
+# you should check the value of RC_CMD for "restart".
+# This also applies to start_post, stop_pre and stop_post.
 start_pre()
 {
+	if [ "$RC_CMD" = restart ]; then
+		# This block will only execute for a restart command. Use a
+		# structure like this if you need special processing for a
+		# restart which you do not need for a normal start.
+		# The function can also fail from here, which will mean that a
+		# restart can fail.
+		# This logic can also be used in start_post, stop_pre and
+		# stop_post.
+	fi
     # Ensure that our dirs are correct
     checkpath --dir --owner foo:foo --mode 0664 \\
 	/var/run/foo /var/cache/foo

mk/os-prefix.mk

@@ -0,0 +1,6 @@
+# Copyright (c) 2012 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+ifeq (${MKPREFIX},yes)
+CPPFLAGS+=	-DPREFIX
+endif

mk/os.mk

@@ -7,5 +7,6 @@ _OS_SH=		uname -s
 _OS:= 		$(shell ${_OS_SH})
 OS?= 		${_OS}
 include ${MK}/os-${OS}.mk
+include ${MK}/os-prefix.mk
 
 RC_LIB=		/$(LIBNAME)/rc

mk/sys.mk

@@ -11,9 +11,14 @@ SED?=			sed
 SH=			/bin/sh
 
 PREFIX?=
-_UPREFIX_SH=		case "${PREFIX}" in "") echo /usr;; *) echo "${PREFIX}";; esac
+ifeq (${PREFIX},)
-_UPREFIX:=		$(shell ${_UPREFIX_SH})
+UPREFIX= /usr
-UPREFIX=		${_UPREFIX}
+else
+UPREFIX= ${PREFIX}
+ifeq (${MKPREFIX},yes)
+UPREFIX= ${PREFIX}/usr
+endif
+endif
 LOCAL_PREFIX=		/usr/local
 
 PICFLAG?=		-fPIC

net/Makefile

@@ -13,7 +13,7 @@ SRCS-Linux=	iwconfig.sh.in
 INC-Linux=	adsl.sh apipa.sh arping.sh bonding.sh br2684ctl.sh bridge.sh \
 		ccwgroup.sh clip.sh ethtool.sh iproute2.sh ifplugd.sh ip6to4.sh \
 		ipppd.sh iwconfig.sh netplugd.sh pppd.sh pump.sh tuntap.sh udhcpc.sh \
-		vlan.sh macvlan.sh
+		vlan.sh macvlan.sh ip6rd.sh firewalld.sh
 
 SRCS-NetBSD=
 INC-NetBSD=	ifwatchd.sh

net/bonding.sh

@@ -4,6 +4,12 @@
 bonding_depend()
 {
 	before interface macchanger
+	program /sbin/ifconfig /bin/ifconfig
+	# If you do not have sysfs, you MUST have this binary instead for ioctl
+	# Also you will loose some functionality that cannot be done via sysfs:
+	if [ ! -d /sys/class/net ]; then
+		program /sbin/ifenslave
+	fi
 }
 
 _config_vars="$_config_vars slaves"
@@ -23,6 +29,9 @@ bonding_pre_start()
 	eval primary="\$primary_${IFVAR}"
 	unset primary_${IFVAR}
 
+	eval subsume="\$subsume_${IFVAR}"
+	unset subsume_${IFVAR}
+
 
 	[ -z "${slaves}" ] && return 0
 
@@ -34,6 +43,10 @@ bonding_pre_start()
 		fi
 	fi
 
+	if [ ! -d /sys/class/net ]; then
+		ewarn "sysfs is not available! You will be unable to create new bonds, or change dynamic parameters!"
+	fi
+
 	# We can create the interface name we like now, but this
 	# requires sysfs
 	if ! _exists && [ -d /sys/class/net ]; then
@@ -51,7 +64,18 @@ bonding_pre_start()
 
 	# Configure the bond mode, then we can reloop to ensure we configure
 	# All other options
-	for x in /sys/class/net/"${IFACE}"/bonding/mode; do
+	[ -d /sys/class/net ] && for x in /sys/class/net/"${IFACE}"/bonding/mode; do
+		[ -f "${x}" ] || continue
+		n=${x##*/}
+		eval s=\$${n}_${IFVAR}
+		if [ -n "${s}" ]; then
+			einfo "Setting ${n}: ${s}"
+			echo "${s}" >"${x}" || \
+			eerror "Failed to configure $n (${n}_${IFVAR})"
+		fi
+	done
+	# Configure link monitoring
+	for x in /sys/class/net/"${IFACE}"/bonding/miimon; do
 		[ -f "${x}" ] || continue
 		n=${x##*/}
 		eval s=\$${n}_${IFVAR}
@@ -62,11 +86,11 @@ bonding_pre_start()
 		fi
 	done
 	# Nice and dynamic for remaining options:)
-	for x in /sys/class/net/"${IFACE}"/bonding/*; do
+	[ -d /sys/class/net ] && for x in /sys/class/net/"${IFACE}"/bonding/*; do
 		[ -f "${x}" ] || continue
 		n=${x##*/}
 		eval s=\$${n}_${IFVAR}
-		[ "${n}" != "mode" ] || continue
+		[ "${n}" != "mode" -o "${n}" != "miimon" ] || continue
 		if [ -n "${s}" ]; then
 			einfo "Setting ${n}: ${s}"
 			echo "${s}" >"${x}" || \
@@ -84,15 +108,44 @@ bonding_pre_start()
 		_exists true || return 1
 	done
 
-	# Must force the slaves to a particular state before adding them
+	# Unless we are subsuming an existing interface (NFS root), we down
-	for IFACE in ${slaves}; do
+	# slave interfaces to work around bugs supposedly in some chipsets
-		_delete_addresses
+	# that cause failure to enslave from other states.
-		_down
+	if [ -z "${subsume}" ]; then
-	done
+		for IFACE in ${slaves}; do
+			_delete_addresses
+			_down
+		done
+	fi
 	)
 
-	# now force the master to up
+	# Now force the master to up
-	_up
+	#  - First test for interface subsume request (required for NFS root)
+	if [ -n "${subsume}" ]; then
+		einfo "Subsuming ${subsume} interface characteristics."
+		eindent
+		local oiface=${IFACE}
+		IFACE=${subsume}
+		local addr="$(_get_inet_address)"
+		einfo "address: ${addr}"
+		IFACE=${oiface}
+		unset oiface
+		eoutdent
+		# subsume (presumably kernel auto-)configured IP
+		ifconfig ${IFACE} ${addr} up
+	else
+		# warn if root on nfs and no subsume interface supplied
+		local root_fs_type=$(mountinfo -s /)
+		if [ "${root_fs_type}" == "nfs" ]; then
+			warn_nfs=1
+			ewarn "NFS root detected!!!"
+			ewarn " If your system crashes here, /etc/conf.d/net needs"
+			ewarn " subsume_${IFACE}=\"<iface>\" ... where <iface> is the"
+			ewarn " existing, (usually kernel auto-)configured interface."
+		fi
+		# up the interface
+		_up
+    fi
 
 	# finally add in slaves
 	# things needed in the process, and if they are done by ifenslave, openrc, and/or the kernel.
@@ -121,7 +174,7 @@ bonding_pre_start()
 			fi
 		done
 	else
-		/sbin/ifenslave "${IFACE}" ${slaves} >/dev/null
+		ifenslave "${IFACE}" ${slaves} >/dev/null
 	fi
 	eend $?
 
@@ -132,6 +185,11 @@ bonding_stop()
 {
 	_is_bond || return 0
 
+	# Wipe subsumed interface
+	if [ -n "${subsume}" ]; then
+		ifconfig ${subsume} 0.0.0.0
+	fi
+
 	local slaves= s=
 	slaves=$( \
 		sed -n -e 's/^Slave Interface: //p' "/proc/net/bonding/${IFACE}" \
@@ -149,7 +207,7 @@ bonding_stop()
 			echo -"${s}" > /sys/class/net/"${IFACE}"/bonding/slaves
 		done
 	else
-		/sbin/ifenslave -d "${IFACE}" ${slaves}
+		ifenslave -d "${IFACE}" ${slaves}
 	fi
 
 	# reset all slaves

net/bridge.sh

@@ -119,10 +119,8 @@ bridge_pre_start()
 				return 1
 			fi
 			# The interface is known to exist now
-			_set_flag promisc
 			_up
 			if ! brctl addif "${BR_IFACE}" "${x}"; then
-				_set_flag -promisc
 				eend 1
 				return 1
 			fi
@@ -144,6 +142,7 @@ bridge_pre_start()
 	) || return 1
 
 	# Bring up the bridge
+	_set_flag promisc
 	_up
 }
 

net/firewalld.sh

@@ -0,0 +1,38 @@
+# Copyright (c) 2012 Doug Goldstein <cardoe@cardoe.com>
+# Released under the 2-clause BSD license.
+
+firewalld_depend()
+{
+	after interface
+	before dhcp
+	program firewall-cmd
+	[ "$IFACE" != "lo" ] && need firewalld
+}
+
+_config_vars="$_config_vars firewalld_zone"
+
+firewalld_post_start()
+{
+	local firewalld_zone=
+	eval firewalld_zone=\$firewalld_zone_${IFVAR}
+
+	_exists || return 0
+
+	if [ "${IFACE}" != "lo" ]; then
+		firewall-cmd --zone="${firewalld_zone}" \
+			--change-interface="${IFACE}" > /dev/null 2>&1
+	fi
+
+	return 0
+}
+
+firewalld_pre_stop()
+{
+	_exists || return 0
+
+	if [ "${IFACE}" != "lo" ]; then
+		firewall-cmd --remove-interface="${IFACE}" > /dev/null 2>&1
+	fi
+
+	return 0
+}

net/ifconfig.sh.Linux.in

@@ -24,19 +24,19 @@ _exists()
 
 _ifindex()
 {
-	local line= i=-2
+	local index=-1
-	while read line; do
+	local f v
-		: $(( i += 1 ))
+	if [ -e /sys/class/net/"${IFACE}"/ifindex ]; then
-		[ ${i} -lt 1 ] && continue
+		index=$(cat /sys/class/net/"${IFACE}"/ifindex)
-		case "${line}" in
+	else
-			"${IFACE}:"*) echo "${i}"; return 0;;
+		for f in /sys/class/net/*/ifindex ; do
-		esac
+			v=$(cat $f)
-	done < /proc/net/dev
+			[ $v -gt $index ] && index=$v
-
+		done
-	# Return the next available index
+		: $(( index += 1 ))
-	: $(( i += 1 ))
+	fi
-	echo "${i}"
+	echo "${index}"
-	return 1
+	return 0
 }
 
 _is_wireless()

net/iproute2.sh

@@ -10,12 +10,12 @@ iproute2_depend()
 
 _up()
 {
-	ip link set "${IFACE}" up
+	ip link set dev "${IFACE}" up
 }
 
 _down()
 {
-	ip link set "${IFACE}" down
+	ip link set dev "${IFACE}" down
 }
 
 _exists()
@@ -25,19 +25,19 @@ _exists()
 
 _ifindex()
 {
-	local line= i=-2
+	local index=-1
-	while read line; do
+	local f v
-		: $(( i += 1 ))
+	if [ -e /sys/class/net/"${IFACE}"/ifindex ]; then
-		[ ${i} -lt 1 ] && continue
+		index=$(cat /sys/class/net/"${IFACE}"/ifindex)
-		case "${line}" in
+	else
-			"${IFACE}:"*) echo "${i}"; return 0;;
+		for f in /sys/class/net/*/ifindex ; do
-		esac
+			v=$(cat $f)
-	done < /proc/net/dev
+			[ $v -gt $index ] && index=$v
-
+		done
-	# Return the next available index
+		: $(( index += 1 ))
-	: $(( i += 1 ))
+	fi
-	echo "${i}"
+	echo "${index}"
-	return 1
+	return 0
 }
 
 _is_wireless()
@@ -57,7 +57,7 @@ _set_flag()
 		flag=${flag#-}
 		opt="off"
 	fi
-	ip link set "${IFACE}" "${flag}" "${opt}"
+	ip link set dev "${IFACE}" "${flag}" "${opt}"
 }
 
 _get_mac_address()
@@ -79,7 +79,7 @@ _get_mac_address()
 
 _set_mac_address()
 {
-	ip link set "${IFACE}" address "$1"
+	ip link set dev "${IFACE}" address "$1"
 }
 
 _get_inet_addresses()
@@ -212,7 +212,7 @@ _delete_addresses()
 
 _has_carrier()
 {
-	return 0
+	LC_ALL=C ip link show dev "${IFACE}" | grep -q "LOWER_UP"
 }
 
 _tunnel()
@@ -274,12 +274,12 @@ iproute2_pre_start()
 	# MTU support
 	local mtu=
 	eval mtu=\$mtu_${IFVAR}
-	[ -n "${mtu}" ] && ip link set "${IFACE}" mtu "${mtu}"
+	[ -n "${mtu}" ] && ip link set dev "${IFACE}" mtu "${mtu}"
 
 	# TX Queue Length support
 	local len=
 	eval len=\$txqueuelen_${IFVAR}
-	[ -n "${len}" ] && ip link set "${IFACE}" txqueuelen "${len}"
+	[ -n "${len}" ] && ip link set dev "${IFACE}" txqueuelen "${len}"
 
 	return 0
 }
@@ -287,7 +287,7 @@ iproute2_pre_start()
 _iproute2_ipv6_tentative()
 {
 	# Only check tentative when we have a carrier.
-	LC_ALL=C ip link show dev "${IFACE}" | grep -q "NO-CARRIER" && return 1
+	_has_carrier || return 1
 	LC_ALL=C ip addr show dev "${IFACE}" | \
 		grep -q "^[[:space:]]*inet6 .* tentative"
 }

net/udhcpc.sh

@@ -61,12 +61,12 @@ udhcpc_start()
 	esac
 
 	case " ${args} " in
-		*" --hosname="*|*" -h "*|*" -H "*);;
+		*" --hostname="*|*" -h "*|*" -H "*);;
 		*)
 			if ${sendhost}; then
 				local hname="$(hostname)"
 				if [ "${hname}" != "(none)" ] && [ "${hname}" != "localhost" ]; then
-					args="${args} --hostname='${hname}'"
+					args="${args} -x hostname:'${hname}'"
 				fi
 			fi
 			;;

net/vlan.sh

@@ -66,26 +66,41 @@ vlan_post_start()
 		einfo "Adding VLAN ${vlan} to ${IFACE}"
 		# We need to gather all interface configuration options
 		# 1) naming. Default to the standard "${IFACE}.${vlan}" but it can be anything
-		eval vname=\$vlan${vlan}_name
+		eval vname=\$${IFACE}_vlan${vlan}_name
+		[ -z "${vname}" ] && eval vname=\$vlan${vlan}_name
 		[ -z "${vname}" ] && vname="${IFACE}.${vlan}"
 		# 2) flags
-		eval vflags=\$vlan${vlan}_flags
+		eval vflags=\$${IFACE}_vlan${vlan}_flags
+		[ -z "${vname}" ] && eval vflags=\$vlan${vlan}_flags
 		# 3) ingress/egress map
-		eval vingress=\$vlan${vlan}_ingress
+		eval vingress=\$${IFACE}_vlan${vlan}_ingress
+		[ -z "${vingress}" ] && eval vingress=\$vlan${vlan}_ingress
 		[ -z "${vingress}" ] || vingress="ingress-qos-map ${vingress}"
-		eval vegress=\$vlan${vlan}_egress
+		eval vegress=\$${IFACE}_vlan${vlan}_egress
+		[ -z "${vegress}" ] && eval vegress=\$vlan${vlan}_egress
 		[ -z "${vegress}" ] || vegress="egress-qos-map ${vegress}"
 
+		# txqueue
 		local txqueuelen=
-		eval txqueuelen=\$txqueuelen_vlan${vlan}
+		eval txqueuelen=\$txqueuelen_${IFACE}_vlan${vlan}
+		[ -z "${txqueuelen}" ] && eval txqueuelen=\$txqueuelen_vlan${vlan}
+		# mac
 		local mac=
-		eval mac=\$mac_vlan${vlan}
+		eval mac=\$mac_${IFACE}_vlan${vlan}
+		[ -z "${mac}" ] && eval mac=\$mac_vlan${vlan}
+		# broadcast
 		local broadcast=
-		eval broadcast=\$broadcast_vlan${vlan}
+		eval broadcast=\$broadcast_${IFACE}_vlan${vlan}
+		[ -z "${broadcast}" ] && eval broadcast=\$broadcast_vlan${vlan}
+		# mtu
 		local mtu=
-		eval mtu=\$mtu_vlan${vlan}
+		eval mtu=\$mtu_${IFACE}_vlan${vlan}
+		[ -z "${mtu}" ] && eval mtu=\$mtu_vlan${vlan}
+
+		# combine it all
 		local opts="${txqueuelen:+txqueuelen} ${txqueuelen} ${mac:+address} ${mac} ${broadcast:+broadcast} ${broadcast} ${mtu:+mtu} ${mtu}"
 
+		veinfo "ip link add link \"${IFACE}\" name \"${vname}\" ${opts} type vlan id \"${vlan}\" ${vflags} ${vingress} ${vegress}"
 		e="$(ip link add link "${IFACE}" name "${vname}" ${opts} type vlan id "${vlan}" ${vflags} ${vingress} ${vegress} 2>&1 1>/dev/null)"
 		if [ -n "${e}" ]; then
 			eend 1 "${e}"

runlevels/Makefile

@@ -10,6 +10,12 @@ BOOTDIR=	${LEVELDIR}/boot
 DEFAULTDIR=	${LEVELDIR}/default
 SHUTDOWNDIR=	${LEVELDIR}/shutdown
 
+ifeq (${MKNET},)
+BOOT+= network staticroute
+endif
+
+INITFILES=	../init.d
+
 MK=		../mk
 include ${MK}/sys.mk
 include ${MK}/os.mk
@@ -19,19 +25,25 @@ BOOT-${OS}=
 SHUTDOWN-${OS}=
 SYSINIT-${OS}=
 
+ifeq (${MKNET},oldnet)
+BOOT-FreeBSD+= net.lo0
+BOOT-Linux+= net.lo
+BOOT-NetBSD+= net.lo0
+endif
+
 BOOT-BSD=	hostid newsyslog savecore syslogd swap-blk
 
 # Generic BSD stuff
-BOOT-FreeBSD=	hostid net.lo0 newsyslog savecore syslogd
+BOOT-FreeBSD+=	hostid newsyslog savecore syslogd
 # FreeBSD specific stuff
 BOOT-FreeBSD+=	adjkerntz dumpon syscons
 
-BOOT-Linux=	hwclock keymaps modules mtab net.lo procfs termencoding
+BOOT-Linux+=	hwclock keymaps modules mtab procfs termencoding tmpfiles.setup
 SHUTDOWN-Linux=	killprocs mount-ro
-SYSINIT-Linux=	devfs dmesg
+SYSINIT-Linux=	devfs dmesg sysfs
 
 # Generic BSD stuff
-BOOT-NetBSD=	hostid net.lo0 newsyslog savecore syslogd
+BOOT-NetBSD+=	hostid newsyslog savecore syslogd
 # NetBSD specific stuff
 BOOT-NetBSD+=	devdb swap-blk ttys wscons
 
@@ -41,25 +53,35 @@ install:
 	if ! test -d "${SYSINITDIR}"; then \
 		${INSTALL} -d ${SYSINITDIR} || exit $$?; \
 		for x in ${SYSINIT}; do \
-			ln -snf ${PREFIX}/etc/init.d/"$$x" ${SYSINITDIR}/"$$x" || exit $$?; \
+			if test -n "${PREFIX}"; then \
-		done \
+				grep -q "keyword .*-prefix" ${INITFILES}/"$$x" && continue; \
+			fi; \
+			ln -snf ${INITDIR}/"$$x" ${SYSINITDIR}/"$$x" || exit $$?; done \
 	fi
 	if ! test -d "${BOOTDIR}"; then \
 		${INSTALL} -d ${BOOTDIR} || exit $$?; \
 		for x in ${BOOT}; do \
-			ln -snf ${PREFIX}/etc/init.d/"$$x" ${BOOTDIR}/"$$x" || exit $$?; \
+			if test -n "${PREFIX}"; then \
+				grep -q "keyword .*-prefix" ${INITFILES}/"$$x" && continue; \
+			fi; \
+			ln -snf ${INITDIR}/"$$x" ${BOOTDIR}/"$$x" || exit $$?; \
 		done \
 	fi
 	if ! test -d "${DEFAULTDIR}"; then \
 		${INSTALL} -d ${DEFAULTDIR} || exit $$?; \
 		for x in ${DEFAULT}; do \
-			ln -snf ${PREFIX}/etc/init.d/"$$x" ${DEFAULTDIR}/"$$x" || exit $$?; \
+			if test -n "${PREFIX}"; then \
-		done \
+				grep -q "keyword .*-prefix" ${INITFILES}/"$$x" && continue; \
+			fi; \
+			ln -snf ${INITDIR}/"$$x" ${DEFAULTDIR}/"$$x" || exit $$?; done \
 	fi
 	if ! test -d "${SHUTDOWNDIR}"; then \
 		${INSTALL} -d ${SHUTDOWNDIR} || exit $$?; \
 		for x in ${SHUTDOWN}; do \
-			ln -snf ${PREFIX}/etc/init.d/"$$x" ${SHUTDOWNDIR}/"$$x" || exit $$?; done \
+			if test -n "${PREFIX}"; then \
+				grep -q "keyword .*-prefix" ${INITFILES}/"$$x" && continue; \
+			fi; \
+			ln -snf ${INITDIR}/"$$x" ${SHUTDOWNDIR}/"$$x" || exit $$?; done \
 	fi
 
 check test::

sh/.gitignore

@@ -9,3 +9,5 @@ init-early.sh
 ifwatchd-carrier.sh
 ifwatchd-nocarrier.sh
 udhcpc-hook.sh
+tmpfiles.sh
+migrate-to-run.sh

sh/Makefile

@@ -1,8 +1,8 @@
 DIR=	${LIBEXECDIR}/sh
 SRCS=	init.sh.in functions.sh.in gendepends.sh.in init-common-post.sh.in \
-	rc-functions.sh.in runscript.sh.in ${SRCS-${OS}}
+	rc-functions.sh.in runscript.sh.in tmpfiles.sh.in ${SRCS-${OS}}
 INC=	init-common-post.sh rc-mount.sh functions.sh rc-functions.sh
-BIN=	gendepends.sh init.sh runscript.sh ${BIN-${OS}}
+BIN=	gendepends.sh init.sh runscript.sh tmpfiles.sh ${BIN-${OS}}
 
 INSTALLAFTER=	_installafter
 
@@ -12,8 +12,10 @@ include ${MK}/os.mk
 SRCS-FreeBSD=
 BIN-FreeBSD=
 
-SRCS-Linux=	cgroup-release-agent.sh.in init-early.sh.in udhcpc-hook.sh.in
+SRCS-Linux=	cgroup-release-agent.sh.in init-early.sh.in migrate-to-run.sh.in \
-BIN-Linux=	cgroup-release-agent.sh init-early.sh udhcpc-hook.sh
+	udhcpc-hook.sh.in
+BIN-Linux=	cgroup-release-agent.sh init-early.sh migrate-to-run.sh \
+	udhcpc-hook.sh
 
 SRCS-NetBSD=	ifwatchd-carrier.sh.in ifwatchd-nocarrier.sh.in
 BIN-NetBSD=	ifwatchd-carrier.sh ifwatchd-nocarrier.sh

sh/functions.sh.in

@@ -105,7 +105,7 @@ else
 	# the last ecmd
 	for _e in ebegin eend error errorn einfo einfon ewarn ewarnn ewend \
 		vebegin veend veinfo vewarn vewend; do
-		eval "$_e() { local _r; @LIBEXECDIR@/bin/$_e \"\$@\"; _r=\$?; \
+		eval "$_e() { local _r; command $_e \"\$@\"; _r=\$?; \
 		export EINFO_LASTCMD=$_e; return \$_r; }"
 	done
 	unset _e

sh/gendepends.sh.in

@@ -4,7 +4,7 @@
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-. @SYSCONFDIR@/init.d/functions.sh
+. @LIBEXECDIR@/sh/functions.sh
 . @LIBEXECDIR@/sh/rc-functions.sh
 
 config() {

sh/init.sh.Linux.in

@@ -3,62 +3,6 @@
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-# This basically mounts $RC_SVCDIR as a ramdisk.
-# The tricky part is finding something our kernel supports
-# tmpfs and ramfs are easy, so force one or the other.
-svcdir_restorecon()
-{
-	local rc=0
-	if [ -x /usr/sbin/selinuxenabled -a -c /selinux/null ] &&
-	  selinuxenabled; then
-		restorecon $RC_SVCDIR
-		rc=$?
-	fi
-	return $rc
-}
-
-mount_svcdir()
-{
-	# mount from fstab if we can
-	fstabinfo --mount "$RC_SVCDIR" && return 0
-
-	local fs= fsopts="-o rw,noexec,nodev,nosuid"
-	local svcsize=${rc_svcsize:-1024}
-
-	# Some buggy kernels report tmpfs even when not present :(
-	if grep -Eq "[[:space:]]+tmpfs$" /proc/filesystems; then
-		local tmpfsopts="${fsopts},mode=755,size=${svcsize}k"
-		mount -n -t tmpfs $tmpfsopts rc-svcdir "$RC_SVCDIR"
-		if [ $? -eq 0 ]; then
-			svcdir_restorecon
-			[ $? -eq 0 ] && return 0
-		fi
-	fi
-
-	if grep -Eq "[[:space:]]+ramfs$" /proc/filesystems; then
-		fs="ramfs"
-		# ramfs has no special options
-	elif [ -e /dev/ram0 ] \
-		&& grep -Eq "[[:space:]]+ext2$" /proc/filesystems; then
-		devdir="/dev/ram0"
-		fs="ext2"
-		dd if=/dev/zero of="$devdir" bs=1k count="$svcsize"
-		mkfs -t "$fs" -i 1024 -vm0 "$devdir" "$svcsize"
-	else
-		echo
-		eerror "OpenRC requires tmpfs, ramfs or a ramdisk + ext2"
-		eerror "compiled into the kernel"
-		echo
-		return 1
-	fi
-
-	mount -n -t "$fs" $fsopts rc-svcdir "$RC_SVCDIR"
-	if [ $? -eq 0 ]; then
-		svcdir_restorecon
-		[ $? -eq 0 ] && return 0
-	fi
-}
-
 . "$RC_LIBEXECDIR"/sh/functions.sh
 [ -r /etc/rc.conf ] && . /etc/rc.conf
 
@@ -75,7 +19,7 @@ if [ -e $f ]; then
 	if [ "$(VAR=a cat $f)" = "$(VAR=b cat $f)" ]; then
 		eerror "You have cruft in /proc that should be deleted"
 	else
-		einfo "/proc is already mounted, skipping"
+		einfo "/proc is already mounted"
 		mountproc=false
 	fi
 fi
@@ -91,24 +35,41 @@ if $mountproc; then
 	eend $?
 fi
 
-# Mount tmpfs on /run when directory exists.
 # /run is a new directory for storing volatile runtime data.
 # Read more about /run at https://lwn.net/Articles/436012
-if [ -d /run ]; then
+sys="$(rc --sys)"
-	if mountinfo -q /run; then
+
-		einfo "/run is already mounted, skipping"
+if [ ! -d /run ]; then
-	else
+	if [ "$sys" = VSERVER ]; then
-		ebegin "Mounting /run"
+		if [ -e /run ]; then
-		if ! fstabinfo --mount /run; then
+		rm -rf /run
-			mount -t tmpfs -o mode=0755,nosuid,nodev tmpfs /run
 		fi
-		eend $?
+		mkdir /run
+	else
+		eerror "The /run directory does not exist. Unable to continue."
+		return 1
 	fi
-	checkpath -d -m 0775 -o root:uucp /run/lock
-elif [ -e /run ]; then
-	einfo "Unable to mount /run since it is not a directory"
 fi
 
+if [ "$sys" = VSERVER ]; then
+	rm -rf /run/*
+elif ! mountinfo -q /run; then
+	ebegin "Mounting /run"
+	rc=0
+	if ! fstabinfo --mount /run; then
+		mount -t tmpfs -o mode=0755,nosuid,nodev tmpfs /run
+		rc=$?
+	fi
+	if [ $rc != 0 ]; then
+		eerror "Unable to mount tmpfs on /run."
+		eerror "Can't continue."
+		exit 1
+	fi
+fi
+
+checkpath -d $RC_SVCDIR
+checkpath -d -m 0775 -o root:uucp /run/lock
+
 # Try to mount xenfs as early as possible, otherwise rc_sys() will always
 # return RC_SYS_XENU and will think that we are in a domU while it's not.
 if grep -Eq "[[:space:]]+xenfs$" /proc/filesystems; then
@@ -119,4 +80,9 @@ if grep -Eq "[[:space:]]+xenfs$" /proc/filesystems; then
 	eend $?
 fi
 
-. "$RC_LIBEXECDIR"/sh/init-common-post.sh
+if [ -e "$RC_LIBEXECDIR"/cache/deptree ]; then
+	cp -p "$RC_LIBEXECDIR"/cache/* "$RC_SVCDIR" 2>/dev/null
+fi
+
+echo sysinit >"$RC_SVCDIR"/softlevel
+exit 0

sh/migrate-to-run.sh.in

@@ -0,0 +1,49 @@
+#!@SHELL@
+# Copyright (c) 2012 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+. "@LIBEXECDIR@/sh/functions.sh"
+
+if ! mountinfo -q -f tmpfs "@LIBEXECDIR@/init.d"; then
+	einfo "The OpenRC dependency data has already been migrated."
+	exit 0
+fi
+
+if [ ! -d "@PREFIX@/run" ]; then
+	eerror "'@PREFIX@/run' is not a directory."
+	eerror "This means the OpenRC dependency data cannot be migrated."
+	eerror "Please create the '@PREFIX@/run' directory and reboot the system."
+	exit 1
+fi
+
+if ! mountinfo -q -f tmpfs "@PREFIX@/run"; then
+	for x in "@PREFIX@/run/."* "@PREFIX@/run/"*; do
+		case "$x" in
+			"@PREFIX@/run/."|"@PREFIX@/run/..")
+				continue
+				;;
+		esac
+		if [ -e "$x" ]; then
+				eerror "Your '@PREFIX@/run' directory contains files."
+				eerror "Please reboot the system."
+				exit 1
+		fi
+	done
+
+	mount -t tmpfs -o mode=0755,nosuid,nodev \
+		tmpfs "@PREFIX@/run" 2> /dev/null
+	if [ $? != 0 ]; then
+		eerror "Unable to mount a tmpfs on '@PREFIX@/run'."
+		eerror "This means the OpenRC dependency data cannot be migrated."
+		eerror "Please create the '@PREFIX@/run' directory and reboot the system."
+		exit 1
+	fi
+fi
+
+rm -rf "@PREFIX@/run/openrc"
+cp -a "@LIBEXECDIR@/init.d" "@PREFIX@/run/openrc"
+rc-update -u
+umount "@LIBEXECDIR@/init.d"
+rm -rf "@LIBEXECDIR@/init.d"
+einfo "The OpenRC dependency data was migrated successfully."
+exit 0

sh/runscript.sh.in

@@ -32,7 +32,7 @@ sourcex()
 	fi
 }
 
-sourcex "@SYSCONFDIR@/init.d/functions.sh"
+sourcex "@LIBEXECDIR@/sh/functions.sh"
 sourcex "@LIBEXECDIR@/sh/rc-functions.sh"
 
 # Support LiveCD foo
@@ -233,7 +233,12 @@ while [ -n "$1" ]; do
 	# Special case depend
 	if [ "$1" = depend ]; then
 		shift
+
+		# Enter the dir of the init script to fix the globbing
+		# bug 412677
+		cd ${RC_SERVICE%/*}
 		_depend
+		cd /
 		continue
 	fi
 	# See if we have the required function and run it

sh/tmpfiles.sh.in

@@ -0,0 +1,297 @@
+#!/bin/sh
+# This is a reimplementation of the systemd tmpfiles.d code
+# Control creation, deletion, and cleaning of volatile and temporary files
+#
+# Copyright (c) 2012 Gentoo Foundation
+#
+# This instance based on the Arch Linux version:
+# http://projects.archlinux.org/initscripts.git/tree/arch-tmpfiles
+# As of 2012/01/01
+#
+# See the tmpfiles.d manpage as well:
+# http://0pointer.de/public/systemd-man/tmpfiles.d.html
+# This script should match the manpage as of 2012/03/12
+#
+
+DRYRUN=0
+
+warninvalid() {
+	printf "tmpfiles: ignoring invalid entry on line %d of \`%s'\n" "$LINENUM" "$FILE"
+	error=$(( error+1 ))
+} >&2
+
+dryrun_or_real() {
+	local dryrun=
+	[ $DRYRUN -eq 1 ] && dryrun=echo
+	$dryrun "$@"
+}
+
+relabel() {
+	local path
+	local paths=$1 mode=$2 uid=$3 gid=$4
+
+	for path in ${paths}; do
+		if [ -e "$path" ]; then
+			[ $uid != '-' ] && dryrun_or_real chown $CHOPTS "$uid" "$path"
+			[ $gid != '-' ] && dryrun_or_real chgrp $CHOPTS "$gid" "$path"
+			[ $mode != '-' ] && dryrun_or_real chmod $CHOPTS "$mode" "$path"
+			[ -x /sbin/restorecon ] && dryrun_or_real restorecon $CHOPTS "$path"
+		fi
+	done
+}
+
+_b() {
+	# Create a block device node if it doesn't exist yet
+	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
+	[ ! -e "$path" ] && dryrun_or_real mknod $path b ${arg%:*} ${arg#*:}
+}
+
+_c() {
+	# Create a character device node if it doesn't exist yet
+	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
+	[ ! -e "$path" ] && dryrun_or_real mknod $path c ${arg%:*} ${arg#*:}
+}
+
+
+_f() {
+	# Create a file if it doesn't exist yet
+	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
+
+	[ $CREATE -gt 0 ] || return 0
+
+	if [ ! -e "$path" ]; then
+		dryrun_or_real install -m"$mode" -o"$uid" -g"$gid" /dev/null "$path"
+		[ -z "$arg" ] || _w "$@"
+	fi
+}
+
+_F() {
+	# Create or truncate a file
+	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
+
+	[ $CREATE -gt 0 ] || return 0
+
+	dryrun_or_real install -m"$mode" -o"$uid" -g"$gid" /dev/null "$path"
+	[ -z "$arg" ] || _w "$@"
+}
+
+_d() {
+	# Create a directory if it doesn't exist yet
+	local path=$1 mode=$2 uid=$3 gid=$4
+
+	[ $CREATE -gt 0 ] || return 0
+
+	if [ ! -d "$path" ]; then
+		dryrun_or_real install -d -m"$mode" -o"$uid" -g"$gid" "$path"
+	fi
+}
+
+_D() {
+	# Create or empty a directory
+	local path=$1 mode=$2 uid=$3 gid=$4
+
+	if [ -d "$path" ] && [ $REMOVE -gt 0 ]; then
+		dryrun_or_real find "$path" -mindepth 1 -maxdepth 1 -xdev -exec rm -rf {} +
+	fi
+
+	if [ $CREATE -gt 0 ]; then
+		dryrun_or_real install -d -m"$mode" -o"$uid" -g"$gid" "$path"
+	fi
+}
+
+_L() {
+	# Create a symlink if it doesn't exist yet
+	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
+	[ ! -e "$path" ] && dryrun_or_real ln -s "$args" "$path"
+}
+
+_p() {
+	# Create a named pipe (FIFO) if it doesn't exist yet
+	local path=$1 mode=$2 uid=$3 gid=$4
+
+	[ $CREATE -gt 0 ] || return 0
+
+	if [ ! -p "$path" ]; then
+		dryrun_or_real mkfifo -m$mode "$path"
+		dryrun_or_real chown "$uid:$gid" "$path"
+	fi
+}
+
+_x() {
+	# Ignore a path during cleaning. Use this type to exclude paths from clean-up as
+	# controlled with the Age parameter. Note that lines of this type do not
+	# influence the effect of r or R lines. Lines of this type accept shell-style
+	# globs in place of of normal path names.
+	:
+	# XXX: we don't implement this
+}
+
+_r() {
+	# Remove a file or directory if it exists. This may not be used to remove
+	# non-empty directories, use R for that. Lines of this type accept shell-style
+	# globs in place of normal path names.
+	local path
+	local paths=$1
+
+	[ $REMOVE -gt 0 ] || return 0
+
+	for path in ${paths}; do
+		if [ -f "$path" ]; then
+			dryrun_or_real rm -f "$path"
+		elif [ -d "$path" ]; then
+			dryrun_or_real rmdir "$path"
+		fi
+	done
+}
+
+_R() {
+	# Recursively remove a path and all its subdirectories (if it is a directory).
+	# Lines of this type accept shell-style globs in place of normal path names.
+	local path
+	local paths=$1
+
+	[ $REMOVE -gt 0 ] || return 0
+
+	for path in ${paths}; do
+		[ -d "$path" ] && dryrun_or_real rm -rf --one-file-system "$path"
+	done
+}
+
+_w() {
+	# Write the argument parameter to a file, if it exists.
+	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
+	if [ -f "$path" ]; then
+		if [ $DRYRUN -eq 1 ]; then
+			echo "echo \"$arg\" >>\"$path\""
+		else
+			echo "$arg" >>"$path"
+		fi
+	fi
+}
+
+_z() {
+	# Set ownership, access mode and relabel security context of a file or
+	# directory if it exists. Lines of this type accept shell-style globs in
+	# place of normal path names.
+	[ $CREATE -gt 0 ] || return 0
+
+	relabel "$@"
+}
+
+_Z() {
+	# Recursively set ownership, access mode and relabel security context of a
+	# path and all its subdirectories (if it is a directory). Lines of this type
+	# accept shell-style globs in place of normal path names.
+	[ $CREATE -gt 0 ] || return 0
+
+	CHOPTS=-R relabel "$@"
+}
+
+CREATE=0 REMOVE=0 CLEAN=0 VERBOSE=0 DRYRUN=0 error=0 LINENO=0
+FILE=
+fragments=
+# XXX: The harcoding of /usr/lib/ is an explicit choice by upstream
+tmpfiles_dirs='/usr/lib/tmpfiles.d/ /etc/tmpfiles.d/ /run/tmpfiles.d/'
+tmpfiles_basenames=''
+tmpfiles_d=''
+# Build a list of sorted unique basenames
+# directories declared later in the tmpfiles_d array will override earlier
+# directories, on a per file basename basis.
+# `/etc/tmpfiles.d/foo.conf' supersedes `/usr/lib/tmpfiles.d/foo.conf'.
+# `/run/tmpfiles/foo.conf' will always be read after `/etc/tmpfiles.d/bar.conf'
+for d in ${tmpfiles_dirs} ; do
+	[ -d $d ] && for f in ${d}/*.conf ; do
+		[ "$f" = "$d/systemd.conf" ] && continue
+		[ -f $f ] && tmpfiles_basenames="${tmpfiles_basenames}\n${f##*/}"
+	done # for f in ${d}
+done # for d in ${tmpfiles_dirs}
+tmpfiles_basenames="`printf "${tmpfiles_basenames}\n" | sort | uniq`"
+
+for b in $tmpfiles_basenames ; do
+	real_f=''
+	for d in $tmpfiles_dirs ; do
+		f=${d}/${b}
+		[ -f "${f}" ] && real_f=$f
+	done
+	[ -f "${real_f}" ] && tmpfiles_d="${tmpfiles_d} ${real_f}"
+done
+
+while [ $# -gt 0 ]; do
+	case $1 in
+		--create) CREATE=1 ;;
+		--remove) REMOVE=1 ;;
+		--clean) CLEAN=1 ;; # TODO: Not implemented
+		--verbose) VERBOSE=1 ;;
+		--dryrun|--dry-run) DRYRUN=1 ;;
+	esac
+	shift
+done
+
+if [ $(( CLEAN )) -eq 1 ] ; then
+	printf '%s clean mode is not implemented\n' "${0##*/}"
+	exit 1
+fi
+
+if [ "$CREATE$REMOVE" = '00' ]; then
+	printf 'usage: %s [--create] [--remove] [--clean] [--verbose] [--dry-run]\n' "${0##*/}"
+	exit 1
+fi
+
+error=0
+
+# loop through the gathered fragments, sorted globally by filename.
+# `/run/tmpfiles/foo.conf' will always be read after `/etc/tmpfiles.d/bar.conf'
+for FILE in $tmpfiles_d ; do
+	LINENUM=0
+
+	### FILE FORMAT ###
+	# XXX: We ignore the 'Age' parameter
+	# 1    2              3    4    5    6   7
+	# Cmd  Path           Mode UID  GID  Age Argument
+	# d    /run/user      0755 root root 10d -
+	# Mode, UID, GID, Age, Argument may be omitted!
+
+	# XXX: Upstream says whitespace is NOT permitted in the Path argument.
+	# But IS allowed when globs are expanded for the x/r/R/z/Z types.
+	while read cmd path mode uid gid age arg; do
+		LINENUM=$(( LINENUM+1 ))
+
+		# Unless we have both command and path, skip this line.
+		if [ -z "$cmd" -o -z "$path" ]; then
+			continue
+		fi
+
+		# whine about invalid entries
+		case $cmd in
+			f|F|w|d|D|p|L|c|b|x|r|R|z|Z) ;;
+			\#) continue ;;
+			*) warninvalid ; continue ;;
+		esac
+
+		# fall back on defaults when parameters are passed as '-'
+		if [ "$mode" = '-' -o "$mode" = '' ]; then
+			case "$cmd" in
+				p|f|F) mode=0644 ;;
+				d|D) mode=0755 ;;
+				z|Z|x|r|R|L) ;;
+			esac
+		fi
+
+		[ "$uid" = '-' -o "$uid" = '' ] && uid=0
+		[ "$gid" = '-' -o "$gid" = '' ] && gid=0
+		[ "$age" = '-' -o "$age" = '' ] && age=0
+		[ "$arg" = '-' -o "$arg" = '' ] && arg=''
+		set -- "$path" "$mode" "$uid" "$gid" "$age" "$arg"
+
+		[ "$VERBOSE" -eq "1" ] && echo _$cmd "$@"
+		_$cmd "$@"
+		rc=$?
+		if [ "${DRYRUN}" -eq "0" ]; then
+			[ $rc -ne 0 ] && error=$((error + 1))
+		fi
+	done <$FILE
+done
+
+exit $error
+
+# vim: set ts=2 sw=2 sts=2 noet ft=sh:

src/includes/helpers.h

@@ -0,0 +1,139 @@
+/*
+  helpers.h
+  This is private to us and not for user consumption
+*/
+
+/*
+ * Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef __HELPERS_H__
+#define __HELPERS_H__
+
+#define ERRX fprintf (stderr, "out of memory\n"); exit (1)
+
+#define UNCONST(a)		((void *)(unsigned long)(const void *)(a))
+
+#ifdef lint
+# define _unused
+#endif
+#if __GNUC__ > 2 || defined(__INTEL_COMPILER)
+# define _dead __attribute__((__noreturn__))
+# define _unused __attribute__((__unused__))
+#else
+# define _dead
+# define _unused
+#endif
+
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
+
+/* Some libc implemntations don't have these */
+#ifndef TAILQ_CONCAT
+#define TAILQ_CONCAT(head1, head2, field) do {				      \
+		if (!TAILQ_EMPTY(head2)) {				      \
+			*(head1)->tqh_last = (head2)->tqh_first;	      \
+			(head2)->tqh_first->field.tqe_prev = (head1)->tqh_last; \
+			(head1)->tqh_last = (head2)->tqh_last;		      \
+			TAILQ_INIT((head2));				      \
+		}							      \
+	} while (0)
+#endif
+
+#ifndef TAILQ_FOREACH_SAFE
+#define	TAILQ_FOREACH_SAFE(var, head, field, tvar)			      \
+	for ((var) = TAILQ_FIRST((head));				      \
+	     (var) && ((tvar) = TAILQ_NEXT((var), field), 1);		      \
+	     (var) = (tvar))
+#endif
+
+#ifdef __GLIBC__
+#  if ! defined (__UCLIBC__) && ! defined (__dietlibc__)
+#    define strlcpy(dst, src, size) snprintf(dst, size, "%s", src)
+#  endif
+#endif
+
+#ifndef timespecsub
+#define	timespecsub(tsp, usp, vsp)					      \
+	do {								      \
+		(vsp)->tv_sec = (tsp)->tv_sec - (usp)->tv_sec;		      \
+		(vsp)->tv_nsec = (tsp)->tv_nsec - (usp)->tv_nsec;	      \
+		if ((vsp)->tv_nsec < 0) {				      \
+			(vsp)->tv_sec--;				      \
+			(vsp)->tv_nsec += 1000000000L;			      \
+		}							      \
+	} while (/* CONSTCOND */ 0)
+#endif
+
+_unused static void *xmalloc (size_t size)
+{
+	void *value = malloc(size);
+
+	if (value)
+		return (value);
+
+	ERRX;
+	/* NOTREACHED */
+}
+
+_unused static void *xrealloc(void *ptr, size_t size)
+{
+	void *value = realloc(ptr, size);
+
+	if (value)
+		return (value);
+
+	ERRX;
+	/* NOTREACHED */
+}
+
+_unused static char *xstrdup(const char *str)
+{
+	char *value;
+
+	if (! str)
+		return (NULL);
+
+	value = strdup(str);
+
+	if (value)
+		return (value);
+
+	ERRX;
+	/* NOTREACHED */
+}
+
+#undef ERRX
+
+/* basename_c never modifies the argument. As such, if there is a trailing
+ * slash then an empty string is returned. */
+_unused static const char *basename_c(const char *path)
+{
+	const char *slash = strrchr(path, '/');
+
+	if (slash)
+		return (++slash);
+	return (path);
+}
+
+#endif

src/includes/rc-misc.h

@@ -38,6 +38,8 @@
 #include <string.h>
 #include <unistd.h>
 
+#include "helpers.h"
+
 #define RC_LEVEL_BOOT           "boot"
 #define RC_LEVEL_DEFAULT        "default"
 
@@ -52,98 +54,6 @@
 #define RC_SVCDIR_STARTED       RC_SVCDIR "/started"
 #define RC_SVCDIR_COLDPLUGGED	RC_SVCDIR "/coldplugged"
 
-#define ERRX fprintf (stderr, "out of memory\n"); exit (1)
-
-#define UNCONST(a)		((void *)(unsigned long)(const void *)(a))
-
-#ifdef lint
-# define _unused
-#endif
-#if __GNUC__ > 2 || defined(__INTEL_COMPILER)
-# define _dead __attribute__((__noreturn__))
-# define _unused __attribute__((__unused__))
-#else
-# define _dead
-# define _unused
-#endif
-
-/* Some libc implemntations don't have these */
-#ifndef TAILQ_CONCAT
-#define TAILQ_CONCAT(head1, head2, field) do {				      \
-		if (!TAILQ_EMPTY(head2)) {				      \
-			*(head1)->tqh_last = (head2)->tqh_first;	      \
-			(head2)->tqh_first->field.tqe_prev = (head1)->tqh_last; \
-			(head1)->tqh_last = (head2)->tqh_last;		      \
-			TAILQ_INIT((head2));				      \
-		}							      \
-	} while (0)
-#endif
-
-#ifndef TAILQ_FOREACH_SAFE
-#define	TAILQ_FOREACH_SAFE(var, head, field, tvar)			      \
-	for ((var) = TAILQ_FIRST((head));				      \
-	     (var) && ((tvar) = TAILQ_NEXT((var), field), 1);		      \
-	     (var) = (tvar))
-#endif
-
-#ifdef __GLIBC__
-#  if ! defined (__UCLIBC__) && ! defined (__dietlibc__)
-#    define strlcpy(dst, src, size) snprintf(dst, size, "%s", src)
-#  endif
-#endif
-
-#ifndef timespecsub
-#define	timespecsub(tsp, usp, vsp)					      \
-	do {								      \
-		(vsp)->tv_sec = (tsp)->tv_sec - (usp)->tv_sec;		      \
-		(vsp)->tv_nsec = (tsp)->tv_nsec - (usp)->tv_nsec;	      \
-		if ((vsp)->tv_nsec < 0) {				      \
-			(vsp)->tv_sec--;				      \
-			(vsp)->tv_nsec += 1000000000L;			      \
-		}							      \
-	} while (/* CONSTCOND */ 0)
-#endif
-
-_unused static void *xmalloc (size_t size)
-{
-	void *value = malloc(size);
-
-	if (value)
-		return (value);
-
-	ERRX;
-	/* NOTREACHED */
-}
-
-_unused static void *xrealloc(void *ptr, size_t size)
-{
-	void *value = realloc(ptr, size);
-
-	if (value)
-		return (value);
-
-	ERRX;
-	/* NOTREACHED */
-}
-
-_unused static char *xstrdup(const char *str)
-{
-	char *value;
-
-	if (! str)
-		return (NULL);
-
-	value = strdup(str);
-
-	if (value)
-		return (value);
-
-	ERRX;
-	/* NOTREACHED */
-}
-
-#undef ERRX
-
 _unused static bool exists(const char *pathname)
 {
 	struct stat buf;
@@ -176,16 +86,5 @@ int is_writable(const char *);
 #define service_start(service) exec_service(service, "start");
 #define service_stop(service)  exec_service(service, "stop");
 
-/* basename_c never modifies the argument. As such, if there is a trailing
- * slash then an empty string is returned. */
-_unused static const char *basename_c(const char *path)
-{
-	const char *slash = strrchr(path, '/');
-
-	if (slash)
-		return (++slash);
-	return (path);
-}
-
 int parse_mode(mode_t *, char *);
 #endif

src/libeinfo/libeinfo.c

@@ -51,6 +51,7 @@ const char libeinfo_copyright[] = "Copyright (c) 2007-2008 Roy Marples";
 #include <unistd.h>
 
 #include "einfo.h"
+#include "helpers.h"
 #include "hidden-visibility.h"
 
 hidden_proto(ecolor)
@@ -134,7 +135,7 @@ static const struct ecolor ecolors[] = {
 	{ ECOLOR_BRACKET, BRACKET, "bracket" },
 	{ ECOLOR_NORMAL,  0,       NULL      },
 };
-static const char *ecolors_str[sizeof(ecolors)/sizeof(ecolors[0])];
+static const char *ecolors_str[ARRAY_SIZE(ecolors)];
 
 static char *flush = NULL;
 static char *up = NULL;
@@ -225,27 +226,6 @@ strlcat(char *dst, const char *src, size_t size)
 
 	return dst_n + (s - src);
 }
-
-static size_t
-strlcpy(char *dst, const char *src, size_t size)
-{
-	const char *s = src;
-	size_t n = size;
-
-	if (n && --n)
-		do {
-			if (!(*dst++ = *src++))
-				break;
-		} while (--n);
-
-	if (!n) {
-		if (size)
-			*dst = '\0';
-		while (*src++);
-	}
-
-	return src - s - 1;
-}
 #  endif
 #endif
 
@@ -462,7 +442,7 @@ colour_terminal(FILE * EINFO_RESTRICT f)
 
 	/* Now setup our colours */
 	p = ebuffer;
-	for (i = 0; i < sizeof(ecolors) / sizeof(ecolors[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(ecolors); ++i) {
 		tmp[0] = '\0';
 		if (ecolors[i].name) {
 			bold = _md;
@@ -598,7 +578,7 @@ _ecolor(FILE * EINFO_RESTRICT f, ECOLOR color)
 	if (!colour_terminal(f))
 		return "";
 
-	for (i = 0; i < sizeof(ecolors) / sizeof(ecolors[0]); i++)
+	for (i = 0; i < ARRAY_SIZE(ecolors); ++i)
 		if (ecolors[i].color == color)
 			return ecolors_str[i];
 	return "";

src/librc/librc-depend.c

@@ -28,6 +28,8 @@
  * SUCH DAMAGE.
  */
 
+#include <sys/utsname.h>
+
 #include "librc.h"
 
 #define GENDEP          RC_LIBEXECDIR "/sh/gendepends.sh"
@@ -687,27 +689,27 @@ rc_deptree_update_needed(time_t *newest, char *file)
 	if (!existss(RC_DEPTREE_CACHE))
 		return true;
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_INITDIR, newest, file))
-		newer = true;
+		return true;
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_CONFDIR, newest, file))
-		newer = true;
+		return true;
 #ifdef RC_PKG_INITDIR
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_PKG_INITDIR, newest, file))
-		newer = true;
+		return true;
 #endif
 #ifdef RC_PKG_CONFDIR
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_PKG_CONFDIR, newest, file))
-		newer = true;
+		return true;
 #endif
 #ifdef RC_LOCAL_INITDIR
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_LOCAL_INITDIR, newest, file))
-		newer = true;
+		return true;
 #endif
 #ifdef RC_LOCAL_CONFDIR
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_LOCAL_CONFDIR, newest, file))
-		newer = true;
+		return true;
 #endif
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_CONF, newest, file))
-		newer = true;
+		return true;
 
 	/* Some init scripts dependencies change depending on config files
 	 * outside of baselayout, like syslog-ng, so we check those too. */
@@ -715,8 +717,7 @@ rc_deptree_update_needed(time_t *newest, char *file)
 	TAILQ_FOREACH(s, config, entries) {
 		if (!rc_newer_than(RC_DEPTREE_CACHE, s->value, newest, file)) {
 			newer = true;
-			if (newest == NULL)
+			break;
-				break;
 		}
 	}
 	rc_stringlist_free(config);
@@ -748,12 +749,15 @@ rc_deptree_update(void)
 	size_t i, k, l;
 	bool retval = true;
 	const char *sys = rc_sys();
+	struct utsname uts;
 
 	/* Some init scripts need RC_LIBEXECDIR to source stuff
 	   Ideally we should be setting our full env instead */
 	if (!getenv("RC_LIBEXECDIR"))
 		setenv("RC_LIBEXECDIR", RC_LIBEXECDIR, 0);
 
+	if (uname(&uts) == 0)
+		setenv("RC_UNAME", uts.sysname, 1);
 	/* Phase 1 - source all init scripts and print dependencies */
 	if (!(fp = popen(GENDEP, "r")))
 		return false;

src/librc/librc-misc.c

@@ -29,7 +29,6 @@
  */
 
 #include "librc.h"
-#include "einfo.h"
 
 bool
 rc_yesno(const char *value)
@@ -139,15 +138,13 @@ rc_proc_getent(const char *ent)
 	if (!exists("/proc/cmdline"))
 		return NULL;
 
-	if (!(fp = fopen("/proc/cmdline", "r"))) {
+	if (!(fp = fopen("/proc/cmdline", "r")))
-		eerror("failed to open `/proc/cmdline': %s", strerror(errno));
 		return NULL;
-	}
 
 	proc = NULL;
 	i = 0;
 	if (rc_getline(&proc, &i, fp) == -1 || proc == NULL)
-		eerror("rc_getline: %s", strerror(errno));
+		return NULL;
 
 	if (proc != NULL) {
 		len = strlen(ent);
@@ -394,13 +391,10 @@ rc_conf_value(const char *setting)
 		atexit(_free_rc_conf);
 #endif
 
-		/* Support old configs, but complain about it. */
+		/* Support old configs. */
 		if (exists(RC_CONF_OLD)) {
 			old = rc_config_load(RC_CONF_OLD);
 			TAILQ_CONCAT(rc_conf, old, entries);
-			ewarn("Your system still has %s", RC_CONF_OLD);
-			ewarn("Please migrate to the appropriate settings in %s", RC_CONF);
-			ewarn("and delete %s.", RC_CONF_OLD);
 #ifdef DEBUG_MEMORY
 			free(old);
 #endif

src/librc/librc.c

@@ -216,6 +216,7 @@ rc_sys_v2(void)
 		}
 		/* Now do detection */
 		__STRING_SWITCH(systype)
+		__STRING_CASE(RC_SYS_PREFIX)	{ return RC_SYS_PREFIX; }
 #ifdef __FreeBSD__
 		__STRING_CASE(RC_SYS_JAIL) { return RC_SYS_JAIL; }
 #endif /* __FreeBSD__ */
@@ -245,6 +246,10 @@ librc_hidden_def(rc_sys_v2)
 const char *
 rc_sys_v1(void)
 {
+#ifdef PREFIX
+	return RC_SYS_PREFIX;
+#else
+
 #ifdef __FreeBSD__
 	int jailed = 0;
 	size_t len = sizeof(jailed);
@@ -281,6 +286,7 @@ rc_sys_v1(void)
 #endif
 
 	return NULL;
+#endif /* PREFIX */
 }
 librc_hidden_def(rc_sys_v1)
 

src/librc/rc.h.in

@@ -33,10 +33,17 @@
 
 __BEGIN_DECLS
 
+#define RC_PREFIX "@PREFIX@"
 #define RC_SYSCONFDIR		"@SYSCONFDIR@"
 #define RC_LIBDIR               "@PREFIX@/@LIB@/rc"
 #define RC_LIBEXECDIR           "@LIBEXECDIR@"
+#if defined(PREFIX)
 #define RC_SVCDIR               RC_LIBEXECDIR "/init.d"
+#elif defined(__linux__)
+#define RC_SVCDIR               "@PREFIX@/run/openrc"
+#else
+#define RC_SVCDIR               RC_LIBEXECDIR "/init.d"
+#endif
 #define RC_RUNLEVELDIR          RC_SYSCONFDIR "/runlevels"
 #define RC_INITDIR              RC_SYSCONFDIR "/init.d"
 #define RC_CONFDIR              RC_SYSCONFDIR "/conf.d"
@@ -276,6 +283,7 @@ bool rc_service_daemons_crashed(const char *);
 #define RC_SYS_JAIL    "JAIL"
 #define RC_SYS_OPENVZ  "OPENVZ"
 #define RC_SYS_LXC     "LXC"
+#define RC_SYS_PREFIX  "PREFIX"
 #define RC_SYS_UML     "UML"
 #define RC_SYS_VSERVER "VSERVER"
 #define RC_SYS_XEN0    "XEN0"

src/rc/_usage.h

@@ -38,7 +38,7 @@
 	"Disable color output",						      \
 	"Display software version",			              \
 	"Run verbosely",						      \
-	"Run quietly"
+	"Run quietly (Does not affect errors)"
 
 #define case_RC_COMMON_getopt_case_C  setenv ("EINFO_COLOR", "NO", 1);
 #define case_RC_COMMON_getopt_case_h  usage (EXIT_SUCCESS);

src/rc/checkpath.c

@@ -60,7 +60,8 @@ extern const char *applet;
  * See systemd's src/label.c:label_mkdir
  */
 static int
-do_check(char *path, uid_t uid, gid_t gid, mode_t mode, inode_t type, bool trunc)
+do_check(char *path, uid_t uid, gid_t gid, mode_t mode, inode_t type,
+		bool trunc, bool chowner)
 {
 	struct stat st;
 	int fd, flags;
@@ -132,14 +133,14 @@ do_check(char *path, uid_t uid, gid_t gid, mode_t mode, inode_t type, bool trunc
 	}
 
 	if (mode && (st.st_mode & 0777) != mode) {
-		einfo("%s: correcting mode", applet);
+		einfo("%s: correcting mode", path);
 		if (chmod(path, mode)) {
 			eerror("%s: chmod: %s", applet, strerror(errno));
 			return -1;
 		}
 	}
 
-	if (st.st_uid != uid || st.st_gid != gid) {
+	if (chowner && (st.st_uid != uid || st.st_gid != gid)) {
 		if (st.st_dev || st.st_ino)
 			einfo("%s: correcting owner", path);
 		if (chown(path, uid, gid)) {
@@ -222,19 +223,20 @@ checkpath(int argc, char **argv)
 	struct group *gr = NULL;
 	inode_t type = inode_unknown;
 	int retval = EXIT_SUCCESS;
-	bool trunc = 0;
+	bool trunc = false;
+	bool chowner = false;
 
 	while ((opt = getopt_long(argc, argv, getoptstring,
 		    longopts, (int *) 0)) != -1)
 	{
 		switch (opt) {
 		case 'D':
-			trunc = 1;
+			trunc = true;
 		case 'd':
 			type = inode_dir;
 			break;
 		case 'F':
-			trunc = 1;
+			trunc = true;
 		case 'f':
 			type = inode_file;
 			break;
@@ -247,6 +249,7 @@ checkpath(int argc, char **argv)
 				    applet, optarg);
 			break;
 		case 'o':
+			chowner = true;
 			if (parse_owner(&pw, &gr, optarg) != 0)
 				eerrorx("%s: owner `%s' not found",
 				    applet, optarg);
@@ -272,7 +275,7 @@ checkpath(int argc, char **argv)
 		gid = gr->gr_gid;
 
 	while (optind < argc) {
-		if (do_check(argv[optind], uid, gid, mode, type, trunc))
+		if (do_check(argv[optind], uid, gid, mode, type, trunc, chowner))
 			retval = EXIT_FAILURE;
 		optind++;
 	}

src/rc/fstabinfo.c

@@ -282,7 +282,7 @@ fstabinfo(int argc, char **argv)
 		END_ENT;
 
 		if (!TAILQ_FIRST(files))
-			eerrorx("%s: emtpy fstab", argv[0]);
+			eerrorx("%s: empty fstab", argv[0]);
 	}
 
 	if (!TAILQ_FIRST(files)) {

src/rc/mountinfo.c

@@ -390,12 +390,8 @@ mountinfo(int argc, char **argv)
 	char real_path[PATH_MAX + 1];
 	int opt;
 	int result;
-	bool quiet;
 	char *this_path;
 
-	/* Ensure that we are only quiet when explicitly told to be */
-	unsetenv("EINFO_QUIET");
-
 #define DO_REG(_var)							      \
 	if (_var) free(_var);						      \
 	_var = get_regex(optarg);
@@ -475,7 +471,6 @@ mountinfo(int argc, char **argv)
 	REG_FREE(args.skip_options_regex);
 
 	result = EXIT_FAILURE;
-	quiet = rc_yesno(getenv("EINFO_QUIET"));
 
 	/* We should report the mounts in reverse order to ease unmounting */
 	TAILQ_FOREACH_REVERSE(s, nodes, rc_stringlist, entries) {
@@ -485,7 +480,7 @@ mountinfo(int argc, char **argv)
 		if (skip_point_regex &&
 		    regexec(skip_point_regex, s->value, 0, NULL, 0) == 0)
 			continue;
-		if (! quiet)
+		if (! rc_yesno(getenv("EINFO_QUIET")))
 			printf("%s\n", s->value);
 		result = EXIT_SUCCESS;
 	}

src/rc/rc-applets.c

@@ -253,13 +253,38 @@ do_e(int argc, char **argv)
 	return retval;
 }
 
+static const struct {
+	const char * const name;
+	RC_SERVICE bit;
+} service_bits[] = {
+	{ "service_started",     RC_SERVICE_STARTED,     },
+	{ "service_stopped",     RC_SERVICE_STOPPED,     },
+	{ "service_inactive",    RC_SERVICE_INACTIVE,    },
+	{ "service_starting",    RC_SERVICE_STARTING,    },
+	{ "service_stopping",    RC_SERVICE_STOPPING,    },
+	{ "service_hotplugged",  RC_SERVICE_HOTPLUGGED,  },
+	{ "service_wasinactive", RC_SERVICE_WASINACTIVE, },
+	{ "service_failed",      RC_SERVICE_FAILED,      },
+};
+
+static RC_SERVICE
+lookup_service_state(const char *service)
+{
+	size_t i;
+	for (i = 0; i < ARRAY_SIZE(service_bits); ++i)
+		if (!strcmp(service, service_bits[i].name))
+			return service_bits[i].bit;
+	return 0;
+}
+
 static int
 do_service(int argc, char **argv)
 {
 	bool ok = false;
 	char *service;
 	char *exec;
-	int idx = 0;
+	int idx;
+	RC_SERVICE state, bit;
 
 	if (argc > 1)
 		service = argv[1];
@@ -269,21 +294,11 @@ do_service(int argc, char **argv)
 	if (service == NULL || *service == '\0')
 		eerrorx("%s: no service specified", applet);
 
-	if (strcmp(applet, "service_started") == 0)
+	state = rc_service_state(service);
-		ok = (rc_service_state(service) & RC_SERVICE_STARTED);
+	bit = lookup_service_state(applet);
-	else if (strcmp(applet, "service_stopped") == 0)
+	if (bit) {
-		ok = (rc_service_state(service) & RC_SERVICE_STOPPED);
+		ok = (state & bit);
-	else if (strcmp(applet, "service_inactive") == 0)
+	} else if (strcmp(applet, "service_started_daemon") == 0) {
-		ok = (rc_service_state(service) & RC_SERVICE_INACTIVE);
-	else if (strcmp(applet, "service_starting") == 0)
-		ok = (rc_service_state(service) & RC_SERVICE_STARTING);
-	else if (strcmp(applet, "service_stopping") == 0)
-		ok = (rc_service_state(service) & RC_SERVICE_STOPPING);
-	else if (strcmp(applet, "service_hotplugged") == 0)
-		ok = (rc_service_state(service) & RC_SERVICE_HOTPLUGGED);
-	else if (strcmp(applet, "service_wasinactive") == 0)
-		ok = (rc_service_state(service) & RC_SERVICE_WASINACTIVE);
-	else if (strcmp(applet, "service_started_daemon") == 0) {
 		service = getenv("RC_SVCNAME");
 		exec = argv[1];
 		if (argc > 3) {
@@ -315,37 +330,34 @@ do_mark_service(int argc, char **argv)
 	char *svcname = getenv("RC_SVCNAME");
 	char *service = NULL;
 	char *runscript_pid;
-	char *mtime;
+	/* char *mtime; */
 	pid_t pid;
-	size_t l;
+	RC_SERVICE bit;
+	/* size_t l; */
 
 	if (argc > 1)
 		service = argv[1];
 	else
-		service = getenv("RC_SVCNAME");
+		service = svcname;
 
 	if (service == NULL || *service == '\0')
 		eerrorx("%s: no service specified", applet);
 
-	if (strcmp(applet, "mark_service_started") == 0)
+	if (!strncmp(applet, "mark_", 5) &&
-		ok = rc_service_mark(service, RC_SERVICE_STARTED);
+	    (bit = lookup_service_state(applet + 5)))
-	else if (strcmp(applet, "mark_service_stopped") == 0)
+		ok = rc_service_mark(service, bit);
-		ok = rc_service_mark(service, RC_SERVICE_STOPPED);
-	else if (strcmp(applet, "mark_service_inactive") == 0)
-		ok = rc_service_mark(service, RC_SERVICE_INACTIVE);
-	else if (strcmp(applet, "mark_service_starting") == 0)
-		ok = rc_service_mark(service, RC_SERVICE_STARTING);
-	else if (strcmp(applet, "mark_service_stopping") == 0)
-		ok = rc_service_mark(service, RC_SERVICE_STOPPING);
-	else if (strcmp(applet, "mark_service_hotplugged") == 0)
-		ok = rc_service_mark(service, RC_SERVICE_HOTPLUGGED);
-	else if (strcmp(applet, "mark_service_failed") == 0)
-		ok = rc_service_mark(service, RC_SERVICE_FAILED);
 	else
 		eerrorx("%s: unknown applet", applet);
 
 	/* If we're marking ourselves then we need to inform our parent
 	   runscript process so they do not mark us based on our exit code */
+	/*
+	 * FIXME: svcname and service are almost always equal except called from a
+	 * shell with just argv[1] - So that doesn't seem to do what Roy initially
+	 * expected.
+	 * See 20120424041423.GA23657@odin.qasl.de (Tue, 24 Apr 2012 06:14:23 +0200,
+	 * openrc@gentoo.org).
+	 */
 	if (ok && svcname && strcmp(svcname, service) == 0) {
 		runscript_pid = getenv("RC_RUNSCRIPT_PID");
 		if (runscript_pid && sscanf(runscript_pid, "%d", &pid) == 1)
@@ -355,6 +367,7 @@ do_mark_service(int argc, char **argv)
 
 		/* Remove the exclusive time test. This ensures that it's not
 		   in control as well */
+		/*
 		l = strlen(RC_SVCDIR "/exclusive") + strlen(svcname) +
 		    strlen(runscript_pid) + 4;
 		mtime = xmalloc(l);
@@ -363,6 +376,7 @@ do_mark_service(int argc, char **argv)
 		if (exists(mtime) && unlink(mtime) != 0)
 			eerror("%s: unlink: %s", applet, strerror(errno));
 		free(mtime);
+		*/
 	}
 
 	return ok ? EXIT_SUCCESS : EXIT_FAILURE;
@@ -400,7 +414,7 @@ do_value(int argc, char **argv)
 }
 
 static int
-do_shell_var(int argc, char **argv)
+shell_var(int argc, char **argv)
 {
 	int i;
 	char *p;
@@ -421,106 +435,127 @@ do_shell_var(int argc, char **argv)
 	return EXIT_SUCCESS;
 }
 
+static int
+is_older_than(int argc, char **argv)
+{
+	int i;
+
+	if (argc < 3)
+		return EXIT_FAILURE;
+
+	/* This test is perverted - historically the baselayout function
+	 * returns 0 on *failure*, which is plain wrong */
+	for (i = 2; i < argc; ++i)
+		if (!rc_newer_than(argv[1], argv[i], NULL, NULL))
+			return EXIT_SUCCESS;
+
+	return EXIT_FAILURE;
+}
+
+static int
+is_newer_than(int argc, char **argv)
+{
+	int i;
+
+	if (argc < 3)
+		return EXIT_FAILURE;
+
+	/* This test is correct as it's not present in baselayout */
+	for (i = 2; i < argc; ++i)
+		if (!rc_newer_than(argv[1], argv[i], NULL, NULL))
+			return EXIT_FAILURE;
+
+	return EXIT_SUCCESS;
+}
+
+static int
+is_runlevel_start(_unused int argc, _unused char **argv)
+{
+	return rc_runlevel_starting() ? 0 : 1;
+}
+
+static int
+is_runlevel_stop(_unused int argc, _unused char **argv)
+{
+	return rc_runlevel_stopping() ? 0 : 1;
+}
+
+static int
+rc_abort(_unused int argc, _unused char **argv)
+{
+	const char *p = getenv("RC_PID");
+	int pid;
+
+	if (p && sscanf(p, "%d", &pid) == 1) {
+		if (kill(pid, SIGUSR1) != 0)
+			eerrorx("rc-abort: failed to signal parent %d: %s",
+			    pid, strerror(errno));
+		return EXIT_SUCCESS;
+	}
+
+	return EXIT_FAILURE;
+}
+
+static const struct {
+	const char * const name;
+	int (* const applet)(int argc, char **argv);
+} applets[] = {
+#define A(a) { #a, a }
+	A(fstabinfo),
+	A(mountinfo),
+	{ "rc-depend",           rc_depend,         },
+	{ "rc-service",          rc_service,        },
+	{ "rc-status",           rc_status,         },
+	{ "rc-update",           rc_update,         },
+	{ "update-rc",           rc_update,         },
+	A(runscript),
+	{ "start-stop-daemon",   start_stop_daemon, },
+	A(checkpath),
+	A(swclock),
+	A(shell_var),
+	A(is_older_than),
+	A(is_newer_than),
+	A(is_runlevel_start),
+	A(is_runlevel_stop),
+	{ "rc-abort",            rc_abort,          },
+	/* These are purely for init scripts and do not make sense as
+	 * anything else */
+	{ "service_get_value",   do_value,          },
+	{ "service_set_value",   do_value,          },
+	{ "get_options",         do_value,          },
+	{ "save_options",        do_value,          },
+#undef A
+};
+
 void
 run_applets(int argc, char **argv)
 {
-	int i = 2;
+	size_t i;
-	char *p;
-	pid_t pid = 0;
 
 	/* Bug 351712: We need an extra way to explicitly select an applet OTHER
 	 * than trusting argv[0], as argv[0] is not going to be the applet value if
 	 * we are doing SELinux context switching. For this, we allow calls such as
 	 * 'rc --applet APPLET', and shift ALL of argv down by two array items. */
 	if (strcmp(applet, "rc") == 0 && argc >= 3 &&
-		    (strcmp(argv[1],"--applet") == 0 || strcmp(argv[1], "-a") == 0)) {
+		(strcmp(argv[1],"--applet") == 0 || strcmp(argv[1], "-a") == 0)) {
 		applet = argv[2];
 		argv += 2;
 		argc -= 2;
 	}
 
-	/* These are designed to be applications in their own right */
+	for (i = 0; i < ARRAY_SIZE(applets); ++i)
-	if (strcmp(applet, "fstabinfo") == 0)
+		if (!strcmp(applet, applets[i].name))
-		exit(fstabinfo(argc, argv));
+			exit(applets[i].applet(argc, argv));
-	else if (strcmp(applet, "mountinfo") == 0)
-		exit(mountinfo(argc, argv));
-	else if (strcmp(applet, "rc-depend") == 0)
-		exit(rc_depend(argc, argv));
-	else if (strcmp(applet, "rc-service") == 0)
-		exit(rc_service(argc, argv));
-	else if (strcmp(applet, "rc-status") == 0)
-		exit(rc_status(argc, argv));
-	else if (strcmp(applet, "rc-update") == 0 ||
-	    strcmp(applet, "update-rc") == 0)
-		exit(rc_update(argc, argv));
-	else if (strcmp(applet, "runscript") == 0)
-		exit(runscript(argc, argv));
-	else if (strcmp(applet, "start-stop-daemon") == 0)
-		exit(start_stop_daemon(argc, argv));
-	else if (strcmp (applet, "checkpath") == 0)
-		exit(checkpath(argc, argv));
-	else if (strcmp(applet, "swclock") == 0)
-		exit(swclock(argc, argv));
-
-	/* These could also be applications in their own right */
-	if (strcmp(applet, "shell_var") == 0)
-		exit(do_shell_var(argc, argv));
-
-	/* This test is perverted - historically the baselayout function
-	 * returns 0 on *failure*, which is plain wrong */
-	if (strcmp(applet, "is_older_than") == 0) {
-		if (argc < 3)
-			exit (EXIT_FAILURE);
-		while (i < argc) {
-			if (!rc_newer_than(argv[1], argv[i++], NULL, NULL))
-				exit(EXIT_SUCCESS);
-		}
-		exit(EXIT_FAILURE);
-	};
-	/* This test is correct as it's not present in baselayout */
-	if (strcmp(applet, "is_newer_than") == 0) {
-		if (argc < 3)
-			exit (EXIT_FAILURE);
-		while (i < argc) {
-			if (!rc_newer_than(argv[1], argv[i++], NULL, NULL))
-				exit(EXIT_FAILURE);
-		}
-		exit(EXIT_SUCCESS);
-	};
 
 	if (applet[0] == 'e' || (applet[0] == 'v' && applet[1] == 'e'))
 		exit(do_e(argc, argv));
 
-	/* These are purely for init scripts and do not make sense as
-	 * anything else */
-	if (strcmp(applet, "service_get_value") == 0 ||
-	    strcmp(applet, "service_set_value") == 0 ||
-	    strcmp(applet, "get_options") == 0 ||
-	    strcmp(applet, "save_options") == 0)
-		exit(do_value(argc, argv));
-
 	if (strncmp(applet, "service_", strlen("service_")) == 0)
 		exit(do_service(argc, argv));
 
 	if (strncmp(applet, "mark_service_", strlen("mark_service_")) == 0)
 		exit(do_mark_service(argc, argv));
 
-	if (strcmp(applet, "is_runlevel_start") == 0)
-		exit(rc_runlevel_starting() ? 0 : 1);
-	else if (strcmp (applet, "is_runlevel_stop") == 0)
-		exit(rc_runlevel_stopping() ? 0 : 1);
-
-	if (strcmp(applet, "rc-abort") == 0) {
-		p = getenv("RC_PID");
-		if (p && sscanf(p, "%d", &pid) == 1) {
-			if (kill(pid, SIGUSR1) != 0)
-				eerrorx("rc-abort: failed to signal parent %d: %s",
-				    pid, strerror(errno));
-			exit(EXIT_SUCCESS);
-		}
-		exit(EXIT_FAILURE);
-	}
-
 	if (strcmp(applet, "rc") != 0)
 		eerrorx("%s: unknown applet", applet);
 }

src/rc/rc-misc.c

@@ -191,6 +191,10 @@ env_config(void)
 	if (sys)
 		setenv("RC_SYS", sys, 1);
 
+#ifdef PREFIX
+	setenv("RC_PREFIX", RC_PREFIX, 1);
+#endif
+
 	/* Some scripts may need to take a different code path if
 	   Linux/FreeBSD, etc
 	   To save on calling uname, we store it in an environment variable */

src/rc/rc.c

@@ -793,6 +793,13 @@ main(int argc, char **argv)
 	env_filter();
 	env_config();
 
+	/* complain about old configuration settings if they exist */
+	if (exists(RC_CONF_OLD)) {
+		ewarn("%s still exists on your system and should be removed.",
+				RC_CONF_OLD);
+		ewarn("Please migrate to the appropriate settings in %s", RC_CONF);
+	}
+
 	argc++;
 	argv--;
 	while ((opt = getopt_long(argc, argv, getoptstring,