makefile: add HASSYSV param

runit needs to read /run during shutdown

1

@@ -1,39 +0,0 @@
-#!/bin/sh
-# vim: set ts=4 sw=4 et:
-
-PATH=/usr/bin:/usr/sbin
-
-. /etc/runit/functions
-
-if [ -x /usr/bin/openrc ]; then
-  msg "Welcome to Artix Linux!"
-
-  # Start core services: we'll use OpenRC for this.
-  msg "Initializing services with OpenRC..."
-  
-  for runlevel in sysinit boot default; do
-       openrc $runlevel || msg_error "Failed to start $runlevel runlevel"
-  done
-else
-  msg "Welcome to Artix Linux!"
-
-  [ -r /etc/runit/rc.conf ] && . /etc/runit/rc.conf
-
-  # Start core services: one-time system tasks.
-  detect_virt
-  for f in /etc/runit/core-services/*.sh; do
-      [ -r $f ] && . $f
-  done
-fi
-
-dmesg >/var/log/dmesg.log
-if [ $(sysctl -n kernel.dmesg_restrict 2>/dev/null) -eq 1 ]; then
-	chmod 0600 /var/log/dmesg.log
-else
-	chmod 0644 /var/log/dmesg.log
-fi
-
-mkdir -p /run/runit
-install -m100 /dev/null /run/runit/stopit
-
-msg "Initialization complete, running stage 2..."

1.in

@@ -0,0 +1,27 @@
+#!/bin/bash
+
+PATH=/usr/bin:/usr/sbin
+
+. @RCDIR@/rc.conf
+. @RCDIR@/functions
+
+# Prints distro name and URL
+print_welcome
+
+# log all console messages
+bootlogd_start
+
+run_hook sysinit_start
+
+for sysinit in @RCDIR@/sysinit.d/*; do
+	. $sysinit
+done
+
+# Remove leftover files
+# remove_leftover
+
+run_hook sysinit_end
+
+install -m100 /dev/null @RUNDIR@/stopit
+
+status "Initialization complete"

2.in

@@ -1,21 +1,22 @@
-#!/bin/sh
-# vim: set ts=4 sw=4 et:
+#!/bin/bash
 
 PATH=/usr/bin:/usr/sbin
 
+. @RCDIR@/functions
+
+status "Running stage 2"
+
 runlevel=default
 for arg in $(cat /proc/cmdline); do
-    if [ -d /etc/runit/runsvdir/"$arg" ]; then
-        echo "Runlevel detected: '$arg' (via kernel cmdline)"
+    if [ -d @RUNITDIR@/runsvdir/"$arg" ]; then
+        status "Runlevel detected: '$arg' (via kernel cmdline)"
         runlevel="$arg"
     fi
 done
 
-[ -x /etc/runit/rc.local ] && /etc/runit/rc.local
-
 runsvchdir "${runlevel}"
-mkdir -p /run/runit/runsvdir
-ln -s /etc/runit/runsvdir/current /run/runit/service
+# mkdir -p @RUNDIR@/runsvdir
+ln -s @RUNSVDIR@/current @SERVICEDIR@
 
 exec env - PATH=$PATH \
-    runsvdir -P /run/runit/service 'log: ...........................................................................................................................................................................................................................................................................................................................................................................................................'
+runsvdir -P @SERVICEDIR@ 'log: ...........................................................................................................................................................................................................................................................................................................................................................................................................'

3

@@ -1,59 +0,0 @@
-#!/bin/sh
-# vim: set ts=4 sw=4 et:
-
-PATH=/usr/bin:/usr/sbin
-
-. /etc/runit/functions
-detect_virt
-[ -r /etc/runit/rc.conf ] && . /etc/runit/rc.conf
-
-if [ -e /run/runit/reboot ]; then
-    chmod 100 /run/runit/reboot
-fi
-
-echo
-msg "Waiting for services to stop..."
-sv force-stop /run/runit/service/*
-sv exit /run/runit/service/*
-
-[ -x /etc/runit/rc.shutdown ] && /etc/runit/rc.shutdown
-
-msg "Saving random seed..."
-( umask 077; bytes=$(cat /proc/sys/kernel/random/poolsize) || bytes=512; dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=$bytes >/dev/null 2>&1 )
-
-if [ -z "$VIRTUALIZATION" -a -n "$HARDWARECLOCK" ]; then
-    hwclock --systohc ${HARDWARECLOCK:+--$(echo $HARDWARECLOCK |tr A-Z a-z)}
-fi
-
-halt -w  # for utmp
-
-if [ -z "$VIRTUALIZATION" ]; then
-    msg "Stopping udev..."
-    udevadm control --exit
-fi
-
-msg "Sending TERM signal to processes..."
-pkill --inverse -s0,1 -TERM
-sleep 1
-msg "Sending KILL signal to processes..."
-pkill --inverse -s0,1 -KILL
-
-if [ -z "$VIRTUALIZATION" ]; then
-    msg "Unmounting filesystems, disabling swap..."
-    swapoff -a
-    umount -r -a -t nosysfs,noproc,nodevtmpfs,notmpfs
-    msg "Remounting rootfs read-only..."
-    mount -o remount,ro /
-fi
-
-sync
-
-if [ -z "$VIRTUALIZATION" ]; then
-    deactivate_vgs
-    deactivate_crypt
-    if [ -e /run/runit/reboot ] && command -v kexec >/dev/null; then
-        msg "Triggering kexec..."
-        kexec -e 2>/dev/null
-        # not reached when kexec was successful.
-    fi
-fi

3.in

@@ -0,0 +1,35 @@
+#!/bin/bash
+
+PATH=/usr/bin:/usr/sbin
+
+. @RCDIR@/rc.conf
+. @RCDIR@/functions
+. @RCDIR@/rc.shutdown
+
+status "Stop services ..." sv force-stop @RUNDIR@/service/*
+status "Exit services ..." sv exit @RUNDIR@/service/*
+
+if [ -e @RUNDIR@/reboot ]; then
+    chmod 100 @RUNDIR@/reboot
+fi
+
+# avoid staircase effect
+stty onlcr
+
+echo " "
+printhl "Initiating shutdown..."
+echo " "
+
+run_hook shutdown_start
+
+for shutdown in @RCDIR@/shutdown.d/*; do
+	. $shutdown
+done
+
+run_hook shutdown_poweroff
+
+if [ -e @RUNDIR@/reboot ]; then
+    [[ -x $(type -P kexec) ]] && kexec -e &>/dev/null
+fi
+
+status "Stage 3 completed."

Makefile

@@ -1,44 +1,138 @@
+SYSCONFDIR = /etc
 PREFIX ?= /usr
-SCRIPTS=	1 2 3 ctrlaltdel
+BINDIR = $(PREFIX)/bin
+MANDIR = $(PREFIX)/share/man
+LIBDIR = $(PREFIX)/lib
+TMPFILESDIR = $(LIBDIR)/tmpfiles.d
+RUNITDIR = $(SYSCONFDIR)/runit
+SVDIR = $(RUNITDIR)/sv
+RUNSVDIR = $(RUNITDIR)/runsvdir
+SERVICEDIR = /etc/service
+RUNDIR = /run/runit
+RCBINDIR = $(PREFIX)/lib/rc/bin
+RCDIR = $(SYSCONFDIR)/rc
 
-all:
-	$(CC) $(CFLAGS) halt.c -o halt $(LDFLAGS)
+TMPFILES = tmpfile.conf
+
+BIN = zzz pause modules-load
+
+STAGES = 1 2 3 ctrlaltdel
+
+RCBIN = rc/halt rc/shutdown
+RC = rc/rc.local rc/rc.shutdown rc/functions rc/rc.conf
+
+LN = ln -sf
+CP = cp -R --no-dereference --preserve=mode,links -v
+RM = rm -f
+RMD = rm -fr --one-file-system
+M4 = m4 -P
+CHMODAW = chmod a-w
+CHMODX = chmod +x
+
+HASRC = yes
+HASSYSV = no
+
+EDIT = sed \
+	-e "s|@RUNITDIR[@]|$(RUNITDIR)|g" \
+	-e "s|@SERVICEDIR[@]|$(SERVICEDIR)|g" \
+	-e "s|@RUNSVDIR[@]|$(RUNSVDIR)|g" \
+	-e "s|@RUNDIR[@]|$(RUNDIR)|g" \
+	-e "s|@RCDIR[@]|$(RCDIR)|g"
+
+%: %.in Makefile
+	@echo "GEN $@"
+	@$(RM) "$@"
+	@$(M4) $@.in | $(EDIT) >$@
+	@$(CHMODAW) "$@"
+	@$(CHMODX) "$@"
+
+
+
+all: all-runit
+ifeq ($(HASRC),yes)
+all: all-rc
+endif
+
+all-runit: $(STAGES)
 		$(CC) $(CFLAGS) pause.c -o pause $(LDFLAGS)
 
-install:
-	install -d ${DESTDIR}${PREFIX}/bin
-	install -m755 halt ${DESTDIR}${PREFIX}/bin/halt-runit
-	install -m755 pause ${DESTDIR}${PREFIX}/bin/pause-runit
-	install -m755 shutdown ${DESTDIR}${PREFIX}/bin/shutdown-runit
-	install -m755 modules-load ${DESTDIR}${PREFIX}/bin/modules-load
-	install -m755 zzz ${DESTDIR}${PREFIX}/bin/zzz-runit
-	ln -sf halt-runit ${DESTDIR}${PREFIX}/bin/poweroff-runit
-	ln -sf halt-runit ${DESTDIR}${PREFIX}/bin/reboot-runit
-	install -d ${DESTDIR}${PREFIX}/share/man/man1
-	install -m644 pause.1 ${DESTDIR}${PREFIX}/share/man/man1
-	install -d ${DESTDIR}${PREFIX}/share/man/man8
-	install -m644 zzz.8 ${DESTDIR}${PREFIX}/share/man/man8/zzz-runit.8
-	install -m644 shutdown.8 ${DESTDIR}${PREFIX}/share/man/man8/shutdown-runit.8
-	install -m644 halt.8 ${DESTDIR}${PREFIX}/share/man/man8/halt-runit.8
-	install -m644 modules-load.8 ${DESTDIR}${PREFIX}/share/man/man8
-	ln -sf halt-runit.8 ${DESTDIR}${PREFIX}/share/man/man8/poweroff-runit.8
-	ln -sf halt-runit.8 ${DESTDIR}${PREFIX}/share/man/man8/reboot-runit.8
-	install -d ${DESTDIR}/etc/runit/sv
-	install -d ${DESTDIR}/etc/runit/runsvdir
-	install -d ${DESTDIR}/etc/runit/core-services
-	install -m644 core-services/*.sh ${DESTDIR}/etc/runit/core-services
-	install -m755 ${SCRIPTS} ${DESTDIR}/etc/runit
-	install -m644 functions $(DESTDIR)/etc/runit
-	install -m644 crypt.awk  ${DESTDIR}/etc/runit
-	install -m644 rc.conf ${DESTDIR}/etc/runit
-	install -m755 rc.local ${DESTDIR}/etc/runit
-	install -m755 rc.shutdown ${DESTDIR}/etc/runit
-	ln -sf /run/runit/reboot ${DESTDIR}/etc/runit/
-	ln -sf /run/runit/stopit ${DESTDIR}/etc/runit/
-	cp -aP runsvdir/* ${DESTDIR}/etc/runit/runsvdir/
-	cp -aP services/* ${DESTDIR}/etc/runit/sv/
+all-rc: $(RC) rc/shutdown
+	$(CC) $(CFLAGS) rc/halt.c -o rc/halt $(LDFLAGS)
+
+install-runit:
+	install -d $(DESTDIR)$(RUNITDIR)
+	install -m755 $(STAGES) $(DESTDIR)$(RUNITDIR)
+
+	$(LN) $(RUNDIR)/reboot $(DESTDIR)$(RUNITDIR)/
+	$(LN) $(RUNDIR)/stopit $(DESTDIR)$(RUNITDIR)/
+
+	install -d $(DESTDIR)$(SVDIR)
+	$(CP) sv/* $(DESTDIR)$(SVDIR)/
+
+	install -d $(DESTDIR)$(RUNSVDIR)
+	$(CP) runsvdir/* $(DESTDIR)$(RUNSVDIR)/
+
+	install -d $(DESTDIR)$(BINDIR)
+	install -m755 $(BIN) $(DESTDIR)$(BINDIR)
+
+	install -d $(DESTDIR)$(TMPFILESDIR)
+	install -m755 $(TMPFILES) $(DESTDIR)$(TMPFILESDIR)/runit.conf
+
+	install -d $(DESTDIR)$(MANDIR)/man1
+	install -m644 pause.1 $(DESTDIR)$(MANDIR)/man1
+	install -d $(DESTDIR)$(MANDIR)/man8
+	install -m644 zzz.8 $(DESTDIR)$(MANDIR)/man8/zzz.8
+	install -m644 modules-load.8 $(DESTDIR)$(MANDIR)/man8
+
+install-rc:
+	install -d $(DESTDIR)$(RCDIR)
+	install -d $(DESTDIR)$(RCDIR)/sysinit.d
+	install -d $(DESTDIR)$(RCDIR)/shutdown.d
+	install -m755 $(RC) $(DESTDIR)$(RCDIR)
+	install -m644 rc/sysinit.d/* $(DESTDIR)$(RCDIR)/sysinit.d
+	install -m644 rc/shutdown.d/* $(DESTDIR)$(RCDIR)/shutdown.d
+	install -m644 rc/crypt.awk $(DESTDIR)$(RCDIR)
+
+	install -d $(DESTDIR)$(RCBINDIR)
+	install -m644 $(RCBIN) $(DESTDIR)$(RCBINDIR)
+
+	$(LN) halt $(DESTDIR)$(RCBINDIR)/poweroff
+	$(LN) halt $(DESTDIR)$(RCBINDIR)/reboot
+
+install_sysv:
+	install -d $(DESTDIR)$(BINDIR)
+	$(LN) runit-init $(DESTDIR)$(BINDIR)/init
+	$(LN) $(RCBINDIR)/halt $(DESTDIR)$(BINDIR)/halt
+	$(LN) $(RCBINDIR)/shutdown $(DESTDIR)$(BINDIR)/shutdown
+	$(LN) halt $(DESTDIR)$(BINDIR)/poweroff
+	$(LN) halt $(DESTDIR)$(BINDIR)/reboot
+	install -d $(DESTDIR)$(MANDIR)/man8
+	install -m644 rc/shutdown.8 $(DESTDIR)$(MANDIR)/man8/shutdown.8
+	install -m644 rc/halt.8 $(DESTDIR)$(MANDIR)/man8/halt.8
+	$(LN) halt.8 $(DESTDIR)$(MANDIR)/man8/poweroff.8
+	$(LN) halt.8 $(DESTDIR)$(MANDIR)/man8/reboot.8
+
+install: install-runit
+ifeq ($(HASRC),yes)
+install: install-rc
+ifeq ($(HASSYSV),yes)
+install: install_sysv
+endif
+endif
+
+clean-runit:
+	-rm -f pause
+	-rm -f $(STAGES)
+
+clean-rc:
+	-rm -f rc/halt
+	-rm -f rc/shutdown $(RC)
+
+clean: clean-runit
+ifeq ($(HASRC),yes)
+clean: clean-rc
+endif
 
 clean:
-	-rm -f halt pause
 
-.PHONY: all install clean
+.PHONY: all install clean install-runit install-rc clean-runit clean-rc all-runit all-rc install_sysv

README.md

@@ -4,21 +4,24 @@ This repository contains the runit init scripts for the Artix Linux
 distribution.
 
 This work is based on Void Linux's
-[runit-void](https://github.com/voidlinux/void-runit). Patches to Void
+[void-runit](https://github.com/voidlinux/void-runit). Patches to Void
 Linux's repo will also be applied here.
 
 ## Dependencies
 
+- GNU coreutils
 - A POSIX shell
 - A POSIX awk
 - procps-ng (needs pkill -s0,1)
 - runit
+- opentmpfiles
+- opensysusers
 
 ### How to use it
 
 To see enabled services for "current" runlevel:
 
-    $ ls -l /var/service
+    $ ls -l /run/runit/service
 
 To see available runlevels (default and single, which just runs sulogin):
 
@@ -26,21 +29,21 @@ To see available runlevels (default and single, which just runs sulogin):
 
 To enable and start a service into the "current" runlevel:
 
-    # ln -s /etc/runit/sv/<service> /var/service
+    # ln -s /etc/runit/sv/<service> /run/runit/service
 
 To disable and remove a service:
 
-    # rm -f /var/service/<service>
+    # rm -f /run/runit/service/<service>
 
 To view status of all services for "current" runlevel:
 
-    # sv status /var/service/*
+    # sv status /run/runit/service/*
 
 Feel free to send patches and contribute with improvements!
 
 ## Copyright
 
-runit-cromnix is in the public domain.
+runit-artix is in the public domain.
 
 To the extent possible under law, the creator of this work has waived
 all copyright and related or neighboring rights to this work.

core-services/00-pseudofs.sh

@@ -1,17 +0,0 @@
-# vim: set ts=4 sw=4 et:
-
-msg "Mounting pseudo-filesystems..."
-mountpoint -q /proc || mount -o nosuid,noexec,nodev -t proc proc /proc
-mountpoint -q /sys || mount -o nosuid,noexec,nodev -t sysfs sys /sys
-mountpoint -q /run || mount -o mode=0755,nosuid,nodev -t tmpfs run /run
-mountpoint -q /dev || mount -o mode=0755,nosuid -t devtmpfs dev /dev
-mkdir -p -m0755 /run/runit /run/lvm /run/user /run/lock /run/log /dev/pts /dev/shm
-mountpoint -q /dev/pts || mount -o mode=0620,gid=5,nosuid,noexec -n -t devpts devpts /dev/pts
-mountpoint -q /dev/shm || mount -o mode=1777,nosuid,nodev -n -t tmpfs shm /dev/shm
-mountpoint -q /sys/kernel/security || mount -n -t securityfs securityfs /sys/kernel/security
-
-if [ -z "$VIRTUALIZATION" ]; then
-    mountpoint -q /sys/fs/cgroup || mount -o mode=0755 -t tmpfs cgroup /sys/fs/cgroup
-    mountpoint -q /sys/fs/cgroup/openrc || mkdir -p /sys/fs/cgroup/openrc && mount -t cgroup -o none,name=openrc cgroup /sys/fs/cgroup/openrc
-    awk '$4 == 1 { system("mountpoint -q /sys/fs/cgroup/" $1 " || { mkdir -p /sys/fs/cgroup/" $1 " && mount -t cgroup -o " $1 " cgroup /sys/fs/cgroup/" $1 " ;}" ) }' /proc/cgroups
-fi

core-services/01-static-devnodes.sh

@@ -1,6 +0,0 @@
-# Some kernel modules must be loaded before starting udev(7).
-# Load them by looking at the output of `kmod static-nodes`.
-
-for f in $(kmod static-nodes 2>/dev/null|awk '/Module/ {print $2}'); do
-	modprobe -q $f 2>/dev/null
-done

core-services/02-kmods.sh

@@ -1,9 +0,0 @@
-# vim: set ts=4 sw=4 et:
-
-[ -n "$VIRTUALIZATION" ] && return 0
-# Do not try to load modules if kernel does not support them.
-[ ! -e /proc/modules ] && return 0
-
-msg "Loading kernel modules..."
-modules-load -v | tr '\n' ' ' | sed 's:insmod [^ ]*/::g; s:\.ko\(\.gz\)\? ::g'
-echo

core-services/02-udev.sh

@@ -1,19 +0,0 @@
-# vim: set ts=4 sw=4 et:
-
-[ -n "$VIRTUALIZATION" ] && return 0
-
-if [ -x /usr/lib/systemd/systemd-udevd ]; then
-    _udevd=/usr/lib/systemd/systemd-udevd
-elif [ -x /sbin/udevd -o -x /bin/udevd ]; then
-    _udevd=udevd
-else
-    msg_warn "cannot find udevd!"
-fi
-
-if [ -n "${_udevd}" ]; then
-    msg "Starting udev and waiting for devices to settle..."
-    ${_udevd} --daemon
-    udevadm trigger --action=add --type=subsystems
-    udevadm trigger --action=add --type=devices
-    udevadm settle
-fi

core-services/03-console-setup.sh

@@ -1,26 +0,0 @@
-# vim: set ts=4 sw=4 et:
-
-[ -n "$VIRTUALIZATION" ] && return 0
-
-TTYS=${TTYS:-12}
-if [ -n "$FONT" ]; then
-    msg "Setting up TTYs font to '${FONT}'..."
-
-    _index=0
-    while [ ${_index} -le $TTYS ]; do
-        setfont ${FONT_MAP:+-m $FONT_MAP} ${FONT_UNIMAP:+-u $FONT_UNIMAP} \
-                $FONT -C "/dev/tty${_index}"
-        _index=$((_index + 1))
-    done
-fi
-
-if [ -n "$KEYMAP" ]; then
-    msg "Setting up keymap to '${KEYMAP}'..."
-    loadkeys -q -u ${KEYMAP}
-fi
-
-if [ -n "$HARDWARECLOCK" ]; then
-    msg "Setting up RTC to '${HARDWARECLOCK}'..."
-    TZ=$TIMEZONE hwclock --systz \
-        ${HARDWARECLOCK:+--$(echo $HARDWARECLOCK |tr A-Z a-z) --noadjfile} || emergency_shell
-fi

core-services/03-filesystems.sh

@@ -1,70 +0,0 @@
-# vim: set ts=4 sw=4 et:
-
-[ -n "$VIRTUALIZATION" ] && return 0
-
-msg "Remounting rootfs read-only..."
-mount -o remount,ro / || emergency_shell
-
-if [ -x /sbin/dmraid -o -x /bin/dmraid ]; then
-    msg "Activating dmraid devices..."
-    dmraid -i -ay
-fi
-
-if [ -x /bin/btrfs ]; then
-    msg "Activating btrfs devices..."
-    btrfs device scan || emergency_shell
-fi
-
-if [ -x /sbin/vgchange -o -x /bin/vgchange ]; then
-    msg "Activating LVM devices..."
-    vgchange --sysinit -a y || emergency_shell
-fi
-
-if [ -e /etc/crypttab ]; then
-    msg "Activating encrypted devices..."
-    awk -f /etc/runit/crypt.awk /etc/crypttab
-
-    if [ -x /sbin/vgchange -o -x /bin/vgchange ]; then
-        msg "Activating LVM devices for dm-crypt..."
-        vgchange --sysinit -a y || emergency_shell
-    fi
-fi
-
-if [ -e /etc/zfs/zpool.cache -a -x /usr/bin/zfs ]; then
-    msg "Activating ZFS devices..."
-    zpool import -c /etc/zfs/zpool.cache -N -a
-
-    msg "Mounting ZFS file systems..."
-    zfs mount -a
-
-    msg "Sharing ZFS file systems..."
-    zfs share -a
-
-    # NOTE(dh): ZFS has ZVOLs, block devices on top of storage pools.
-    # In theory, it would be possible to use these as devices in
-    # dmraid, btrfs, LVM and so on. In practice it's unlikely that
-    # anybody is doing that, so we aren't supporting it for now.
-fi
-
-[ -f /fastboot ] && FASTBOOT=1
-[ -f /forcefsck ] && FORCEFSCK="-f"
-for arg in $(cat /proc/cmdline); do
-    case $arg in
-        fastboot) FASTBOOT=1;;
-        forcefsck) FORCEFSCK="-f";;
-    esac
-done
-
-if [ -z "$FASTBOOT" ]; then
-    msg "Checking filesystems:"
-    fsck -A -T -a -t noopts=_netdev $FORCEFSCK
-    if [ $? -gt 1 ]; then
-        emergency_shell
-    fi
-fi
-
-msg "Mounting rootfs read-write..."
-mount -o remount,rw / || emergency_shell
-
-msg "Mounting all non-network filesystems..."
-mount -a -t "nosysfs,nonfs,nonfs4,nosmbfs,nocifs" -O no_netdev || emergency_shell

core-services/04-swap.sh

@@ -1,6 +0,0 @@
-# vim: set ts=4 sw=4 et:
-
-[ -n "$VIRTUALIZATION" ] && return 0
-
-msg "Initializing swap..."
-swapon -a || emergency_shell

core-services/05-misc.sh

@@ -1,21 +0,0 @@
-# vim: set ts=4 sw=4 et:
-
-msg "Initializing random seed..."
-cp /var/lib/random-seed /dev/urandom >/dev/null 2>&1 || true
-( umask 077; bytes=$(cat /proc/sys/kernel/random/poolsize) || bytes=512; dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=$bytes >/dev/null 2>&1 )
-
-msg "Setting up loopback interface..."
-ip link set up dev lo
-
-[ -r /etc/hostname ] && read -r HOSTNAME < /etc/hostname
-if [ -n "$HOSTNAME" ]; then
-    msg "Setting up hostname to '${HOSTNAME}'..."
-    printf "%s" "$HOSTNAME" > /proc/sys/kernel/hostname
-else
-    msg_warn "Didn't setup a hostname!"
-fi
-
-if [ -n "$TIMEZONE" ]; then
-    msg "Setting up timezone to '${TIMEZONE}'..."
-    ln -sf "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
-fi

core-services/08-sysctl.sh

@@ -1,16 +0,0 @@
-# vim: set ts=4 sw=4 et:
-
-if [ -x /sbin/sysctl -o -x /bin/sysctl ]; then
-    msg "Loading sysctl(8) settings..."
-    for i in /run/sysctl.d/*.conf \
-        /etc/sysctl.d/*.conf \
-        /usr/local/lib/sysctl.d/*.conf \
-        /usr/lib/sysctl.d/*.conf \
-        /etc/sysctl.conf; do
-
-        if [ -e "$i" ]; then
-            printf '* Applying %s ...\n' "$i"
-            sysctl -p "$i"
-        fi
-    done
-fi

core-services/99-cleanup.sh

@@ -1,11 +0,0 @@
-# vim: set ts=4 sw=4 et:
-
-install -m0664 -o root -g utmp /dev/null /run/utmp
-if [ ! -e /var/log/wtmp ]; then
-	install -m0664 -o root -g utmp /dev/null /var/log/wtmp
-fi
-if [ ! -e /var/log/btmp ]; then
-	install -m0600 -o root -g utmp /dev/null /var/log/btmp
-fi
-install -dm1777 /tmp/.X11-unix /tmp/.ICE-unix
-rm -f /etc/nologin /forcefsck /forcequotacheck /fastboot

ctrlaltdel.in

@@ -4,7 +4,7 @@ PATH=/usr/bin:/usr/sbin
 MSG="System is going down..."
 
 # We check for this file in stage3 to halt or reboot
-touch /run/runit/reboot
+touch @RUNDIR@/reboot
 
 # Proceed with shutdown process
 echo "$MSG" | wall

functions

@@ -1,57 +0,0 @@
-# *-*-shell-*-*
-
-msg() {
-    # bold
-    printf "\033[1m=> $@\033[m\n"
-}
-
-msg_ok() {
-    # bold/green
-    printf "\033[1m\033[32m OK\033[m\n"
-}
-
-msg_error() {
-    # bold/red
-    printf "\033[1m\033[31mERROR: $@\033[m\n"
-}
-
-msg_warn() {
-    # bold/yellow
-    printf "\033[1m\033[33mWARNING: $@\033[m"
-}
-
-emergency_shell() {
-    echo
-    echo "Cannot continue due to errors above, starting emergency shell."
-    echo "When ready type exit to continue booting."
-    /bin/sh -l
-}
-
-detect_virt() {
-   # Detect LXC containers
-   [ ! -e /proc/self/environ ] && return
-   if grep -q lxc /proc/self/environ >/dev/null; then
-       export VIRTUALIZATION=1
-   fi
-}
-
-deactivate_vgs() {
-   _group=${1:-All}
-   if [ -x /sbin/vgchange -o -x /bin/vgchange ]; then
-       vgs=$(vgs|wc -l)
-       if [ $vgs -gt 0 ]; then
-           msg "Deactivating $_group LVM Volume Groups..."
-           vgchange -an
-       fi
-   fi
-}
-
-deactivate_crypt() {
-   if [ -x /sbin/dmsetup -o -x /bin/dmsetup ]; then
-       msg "Deactivating Crypt Volumes"
-       for v in $(dmsetup ls --target crypt --exec "dmsetup info -c --noheadings -o open,name"); do
-           [ ${v%%:*} -eq 0 ] && cryptsetup close ${v##*:}
-       done
-       deactivate_vgs "Crypt"
-   fi
-}

rc.conf

@@ -1,29 +0,0 @@
-# /etc/runit/rc.conf - system configuration
-
-# Set the host name.
-#
-# NOTE: it's preferred to declare the hostname in /etc/hostname instead:
-# 	- echo myhost > /etc/hostname
-#
-#HOSTNAME="artix"
-
-# Set RTC to UTC or localtime.
-#HARDWARECLOCK="UTC"
-
-# Set timezone, availables timezones at /usr/share/zoneinfo.
-#TIMEZONE="Europe/Madrid"
-
-# Keymap to load, see loadkeys(8).
-#KEYMAP="us"
-
-# Console font to load, see setfont(8).
-#FONT="lat9w-16"
-
-# Console map to load, see setfont(8).
-#FONT_MAP=
-
-# Font unimap to load, see setfont(8).
-#FONT_UNIMAP=
-
-# Amount of ttys which should be setup.
-#TTYS=6

rc/functions.in

@@ -0,0 +1,538 @@
+#!/bin/bash
+# rc functions
+#
+
+# sanitize PATH (will be overridden later when /etc/profile is sourced but is useful for udev)
+export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+
+# clear the TZ envvar, so daemons always respect /etc/localtime
+# unset TZ
+
+. /etc/profile.d/locale.sh
+
+# width:
+calc_columns () {
+	STAT_COL=80
+	if [[ ! -t 1 ]]; then
+		USECOLOR=""
+	elif [[ -t 0 ]]; then
+		# stty will fail when stdin isn't a terminal
+		STAT_COL=$(stty size)
+		# stty gives "rows cols"; strip the rows number, we just want columns
+		STAT_COL=${STAT_COL##* }
+	elif tput cols &>/dev/null; then
+		# is /usr/share/terminfo already mounted, and TERM recognized?
+		STAT_COL=$(tput cols)
+	fi
+	if (( STAT_COL == 0 )); then
+		# if output was 0 (serial console), set default width to 80
+		STAT_COL=80
+		USECOLOR=""
+	fi
+
+	# we use 13 characters for our own stuff
+	STAT_COL=$(( STAT_COL - 13 ))
+
+	if [[ -t 1 ]]; then
+		SAVE_POSITION="\e[s"
+		RESTORE_POSITION="\e[u"
+		DEL_TEXT="\e[$(( STAT_COL + 4 ))G"
+	else
+		SAVE_POSITION=""
+		RESTORE_POSITION=""
+		DEL_TEXT=""
+	fi
+}
+
+calc_columns
+
+# disable colors on broken terminals
+TERM_COLORS=$(tput colors 2>/dev/null)
+if (( $? != 3 )); then
+	case $TERM_COLORS in
+		*[!0-9]*) USECOLOR="";;
+		[0-7])    USECOLOR="";;
+		'')       USECOLOR="";;
+	esac
+fi
+unset TERM_COLORS
+
+unquote() {
+	local -r quotes=$'[\'"]'
+
+	if [[ ${1:0:1} = $quotes && ${1:(-1)} = "${1:0:1}" ]]; then
+		printf '%s' "${1:1:(-1)}"
+	else
+		printf '%s' "$1"
+	fi
+}
+
+# functions:
+
+deltext() {
+	printf "${DEL_TEXT}"
+}
+
+printhl() {
+	printf "${C_OTHER}${PREFIX_HL} ${C_H1}${1}${C_CLEAR} \n"
+}
+
+printsep() {
+	printf "\n${C_SEPARATOR}   ------------------------------\n"
+}
+
+stat_busy() {
+	printf "${C_OTHER}${PREFIX_REG} ${C_MAIN}${1}${C_CLEAR} "
+	printf "${SAVE_POSITION}"
+	deltext
+	printf "   ${C_OTHER}[${C_BUSY}BUSY${C_OTHER}]${C_CLEAR} "
+}
+
+stat_done() {
+	deltext
+	printf "   ${C_OTHER}[${C_DONE}DONE${C_OTHER}]${C_CLEAR} \n"
+}
+
+stat_fail() {
+	deltext
+	printf "   ${C_OTHER}[${C_FAIL}FAIL${C_OTHER}]${C_CLEAR} \n"
+}
+
+status() {
+	local quiet
+	case $1 in
+		-q)
+			quiet=1
+			;;&
+		-v)
+			# NOOP: supported for backwards compat
+			shift
+			;;
+	esac
+	stat_busy "$1"
+	shift
+	if (( quiet )); then
+		"$@" &>/dev/null
+	else
+		"$@"
+	fi
+	local ret=$?
+	(( ret == 0 )) && stat_done || stat_fail
+	return $ret
+}
+
+#  usage : in_array( $needle, $haystack )
+# return : 0 - found
+#          1 - not found
+in_array() {
+	local needle=$1; shift
+	local item
+	for item; do
+		[[ $item = "${needle}" ]] && return 0
+	done
+	return 1 # Not Found
+}
+
+kill_all() {
+    stat_busy "Sending TERM signal to processes"
+    pkill --inverse -s0,1 -TERM
+    if (( $? == 0 )); then
+        stat_done
+    else
+        stat_fail
+        sleep 1
+        status "Sending KILL signal to processes" pkill --inverse -s0,1 -KILL
+    fi
+}
+
+print_welcome() {
+	# see os-release(5)
+	. /etc/os-release
+
+	echo " "
+	printhl "${PRETTY_NAME}\n"
+	printhl "${C_H2}${HOME_URL}"
+	printsep
+}
+
+load_modules() {
+	local rc=0
+
+	/usr/bin/modules-load
+	(( rc+=$? ))
+
+	return $rc
+}
+
+# Start/trigger udev, load MODULES, and settle udev
+udevd_modprobe() {
+	# $1 = where we are being called from.
+	# This is used to determine which hooks to run.
+	status "Starting udev daemon" udevd --daemon
+
+	run_hook "$1_udevlaunched"
+
+	stat_busy "Triggering udev uevents"
+		udevadm trigger --action=add --type=subsystems
+		udevadm trigger --action=add --type=devices
+	stat_done
+
+	# Load modules from the MODULES array and modules-load.d
+	status "Loading user-specified modules" load_modules
+
+	status "Waiting for udev uevents to be processed" \
+		udevadm settle
+
+	run_hook "$1_udevsettled"
+
+	# in case loading a module changed the display mode
+	calc_columns
+}
+
+activate_vgs() {
+	[[ $USELVM = [yY][eE][sS] && -x $(type -P lvm) && -d /sys/block ]] || return 0
+	stat_busy "Activating LVM2 groups"
+		vgchange --sysinit -a y >/dev/null
+	(( $? == 0 )) && stat_done || stat_fail
+}
+
+do_unlock_legacy() {
+	# $1 = requested name
+	# $2 = source device
+	# $3 = password
+	# $4 = options
+	local open=create a=$1 b=$2 failed=0
+	# Ordering of options is different if you are using LUKS vs. not.
+	# Use ugly swizzling to deal with it.
+	# isLuks only gives an exit code but no output to stdout or stderr.
+	if cryptsetup isLuks "$2" 2>/dev/null; then
+		open=luksOpen
+		a=$2
+		b=$1
+	fi
+	case $3 in
+		SWAP)
+			local _overwriteokay=0
+			if [[ -b $2 && -r $2 ]]; then
+				# This is DANGEROUS! If there is any known file system,
+				# partition table, RAID, or LVM volume on the device,
+				# we don't overwrite it.
+				#
+				# 'blkid' returns 2 if no valid signature has been found.
+				# Only in this case should we allow overwriting the device.
+				#
+				# This sanity check _should_ be sufficient, but it might not.
+				# This may cause data loss if it is not used carefully.
+				blkid -p "$2" &>/dev/null
+				(( $? == 2 )) && _overwriteokay=1
+			fi
+			if (( _overwriteokay == 0 )); then
+				false
+			elif cryptsetup -d /dev/urandom $4 $open "$a" "$b" >/dev/null; then
+				printf "creating swapspace..\n"
+				mkswap -f -L $1 /dev/mapper/$1 >/dev/null
+			fi;;
+		ASK)
+			printf "\nOpening '$1' volume:\n"
+			cryptsetup $4 $open "$a" "$b" < /dev/console;;
+		/dev*)
+			local ckdev=${3%%:*}
+			local cka=${3#*:}
+			local ckb=${cka#*:}
+			local cka=${cka%:*}
+			local ckfile=/dev/ckfile
+			local ckdir=/dev/ckdir
+			case ${cka} in
+				*[!0-9]*)
+					# Use a file on the device
+					# cka is not numeric: cka=filesystem, ckb=path
+					mkdir ${ckdir}
+					mount -r -t ${cka} ${ckdev} ${ckdir}
+					dd if=${ckdir}/${ckb} of=${ckfile} >/dev/null 2>&1
+					umount ${ckdir}
+					rmdir ${ckdir};;
+				*)
+					# Read raw data from the block device
+					# cka is numeric: cka=offset, ckb=length
+					dd if=${ckdev} of=${ckfile} bs=1 skip=${cka} count=${ckb} >/dev/null 2>&1;;
+			esac
+			cryptsetup -d ${ckfile} $4 $open "$a" "$b" >/dev/null
+			dd if=/dev/urandom of=${ckfile} bs=1 count=$(stat -c %s ${ckfile}) conv=notrunc >/dev/null 2>&1
+			rm ${ckfile};;
+		/*)
+			cryptsetup -d "$3" $4 $open "$a" "$b" >/dev/null;;
+		*)
+			echo "$3" | cryptsetup $4 $open "$a" "$b" >/dev/null;;
+	esac
+	return $?
+}
+
+do_unlock() {
+	local name=$1 device=$2 password=$3 options=$4
+
+	printf "${C_MAIN}Unlocking $1${C_CLEAR}\n"
+
+	if [[ ${options:0:2} =~ -. ]]; then
+		do_unlock_legacy "$name" "$device" "$password" "$options"
+		return $?
+	fi
+
+	case $password in
+		ASK|SWAP)
+			do_unlock_legacy "$name" "$device" "$password" "$options"
+			;;
+		*)
+			do_unlock_legacy "$name" "$device" "$password" "$options"
+			;;
+	esac
+	failed=$?
+	if (( $failed )); then
+		printf "${C_FAIL}Unlocking of $1 failed.${C_CLEAR}\n"
+	fi
+	return $?
+}
+
+deactivate_crypt() {
+	if [[ -x /usr/bin/dmsetup ]]; then
+		for v in $(dmsetup ls --target crypt --exec "dmsetup info -c --noheadings -o open,name"); do
+			[[ ${v%%:*} == "0" ]] && cryptsetup close ${v##*:}
+		done
+	fi
+}
+
+set_timezone() {
+	local tz=$1 zonefile=/usr/share/zoneinfo/$1
+
+	[[ $tz ]] || return 1
+
+	if [[ ! -e $zonefile ]]; then
+		printf "error: \`%s' is not a valid time zone\n" "$tz"
+		return 1
+	fi
+
+	if [[ -L /etc/localtime && /etc/localtime -ef $zonefile ]]; then
+		return 0
+	else
+		ln -sf "/usr/share/zoneinfo/$tz" /etc/localtime
+	fi
+}
+
+# Filesystem functions
+# These can be overridden/reused for customizations like shutdown/loop-fsck.
+NETFS="nfs,nfs4,smbfs,cifs,codafs,ncpfs,shfs,fuse,fuseblk,glusterfs,davfs,fuse.glusterfs"
+
+# Check local filesystems
+fsck_all() {
+	if [[ -f /forcefsck ]] || in_array forcefsck $(< /proc/cmdline); then
+		FORCEFSCK="-f"
+	elif [[ -f /fastboot ]] || in_array fastboot $(< /proc/cmdline); then
+		return 0
+	elif [[ -e /run/initramfs/root-fsck ]]; then
+		IGNORE_MOUNTED="-M"
+	fi
+
+	fsck -A -T -C${FSCK_FD} -a -t no${NETFS//,/,no},noopts=_netdev ${IGNORE_MOUNTED} -- ${FORCEFSCK}
+}
+
+# Single-user login and/or automatic reboot after fsck (if needed)
+fsck_reboot() {
+	# $1 = exit code returned by fsck
+	# Ignore conditions 'FS errors corrected' and 'Cancelled by the user'
+	(( ($1 | 33) == 33 )) && return 0
+	if (( $1 & 2 )); then
+		echo
+		echo "********************** REBOOT REQUIRED *********************"
+		echo "*                                                          *"
+		echo "* The system will be rebooted automatically in 15 seconds. *"
+		echo "*                                                          *"
+		echo "************************************************************"
+		echo
+		sleep 15
+	else
+		echo
+		echo "*****************  FILESYSTEM CHECK FAILED  ****************"
+		echo "*                                                          *"
+		echo "*  Please repair manually and reboot. Note that the root   *"
+		echo "*  file system is currently mounted read-only. To remount  *"
+		echo "*  it read-write, type: mount -o remount,rw /              *"
+		echo "*  When you exit the maintenance shell, the system will    *"
+		echo "*  reboot automatically.                                   *"
+		echo "*                                                          *"
+		echo "************************************************************"
+		echo
+		sulogin -p
+	fi
+	echo "Automatic reboot in progress..."
+	umount -a
+	mount -o remount,ro /
+	reboot -f
+	exit 0
+}
+
+mount_all() {
+	mount -a -t "no${NETFS//,/,no}" -O no_netdev
+}
+
+remove_leftover() {
+	status 'Removing leftover files' tmpfiles --create --remove --clean
+}
+
+bootlogd_stop() {
+	[[ -f /run/bootlogd.pid ]] || return 0
+	touch /var/log/boot
+	kill $(< /run/bootlogd.pid)
+	rm -f /run/bootlogd.pid
+}
+
+bootlogd_start(){
+    [[ ! -f /var/log/boot ]] && touch /var/log/boot
+    bootlogd -p /run/bootlogd.pid
+}
+
+console_setup(){
+    TTYS=${TTYS:-6}
+    if [ -n "$FONT" ]; then
+        _index=0
+        while [ ${_index} -le $TTYS ]; do
+            setfont ${FONT_MAP:+-m $FONT_MAP} ${FONT_UNIMAP:+-u $FONT_UNIMAP} \
+                    $FONT -C "/dev/tty${_index}"
+            _index=$((_index + 1))
+        done
+    fi
+    if [ -n "$KEYMAP" ]; then
+        loadkeys -q -u ${KEYMAP}
+    fi
+}
+
+init_random_seed(){
+    cp /var/lib/random-seed /dev/urandom >/dev/null 2>&1 || true
+    ( umask 077; bytes=$(cat /proc/sys/kernel/random/poolsize) || bytes=512; dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=$bytes >/dev/null 2>&1 )
+}
+
+save_random_seed(){
+    ( umask 077; bytes=$(cat /proc/sys/kernel/random/poolsize) || bytes=512; dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=$bytes >/dev/null 2>&1 )
+}
+
+mk_kmod_static_nodes(){
+    [[ -d /run/tmpfiles.d ]] || mkdir /run/tmpfiles.d
+    kmod static-nodes --format=tmpfiles --output=/run/tmpfiles.d/kmod.conf
+}
+
+mk_tmpfiles_dev(){
+    if [ -x /usr/bin/tmpfiles ]; then
+        tmpfiles --prefix=/dev --create --boot
+    fi
+}
+
+mk_tmpfiles_setup(){
+    if [ -x /usr/bin/tmpfiles ]; then
+        tmpfiles --exclude-prefix=/dev --create --remove --boot
+    fi
+}
+
+mk_sysusers(){
+    if [ -x /usr/bin/sysusers ]; then
+        sysusers
+    fi
+}
+
+cleanup_1(){
+    install -m0664 -o root -g utmp /dev/null /run/utmp
+    if [ ! -e /var/log/wtmp ]; then
+        install -m0664 -o root -g utmp /dev/null /var/log/wtmp
+    fi
+    if [ ! -e /var/log/btmp ]; then
+        install -m0600 -o root -g utmp /dev/null /var/log/btmp
+    fi
+    rm -rf /tmp
+    install -dm1777 /tmp /tmp/.X11-unix /tmp/.ICE-unix
+    rm -f /etc/nologin #/forcefsck /forcequotacheck /fastboot
+}
+
+###############################
+# Custom hooks in initscripts #
+###############################
+# Hooks can be used to include custom code in various places in the rc.* scripts
+#
+# Define a hook function in a functions.d file using:
+#  function_name() {
+#    ...
+#  }
+#  add_hook hook_name function_name
+# It is allowed to register several hook functions for the same hook
+# Is is also allowed to register the same hook function for several hooks
+#
+# Currently, the following hooks exist:
+# sysinit_start: at the beginning of rc.sysinit
+# shutdown_start: at the beginning of rc.shutdown
+# sysinit_end: at the end of rc.sysinit
+# sysinit_udevlaunched: after udev has been launched in rc.sysinit
+# sysinit_udevsettled: after uevents have settled in rc.sysinit
+# sysinit_premount: before local filesystems are mounted, but after root is mounted read-write in rc.sysinit
+# sysinit_postmount: after local filesystems are mounted
+# shutdown_prekillall: before all processes are being killed in rc.shutdown
+# shutdown_postkillall: after all processes have been killed in rc.shutdown
+# shutdown_preumount: after last filesystem write, but before filesystems are unmounted
+# shutdown_postumount: after filesystems are unmounted
+# shutdown_poweroff: directly before powering off in rc.shutdown
+#
+# Declare add_hook and run_hook as read-only to prevent overwriting them.
+# Too bad we cannot do the same thing with hook_funcs
+
+if (( RC_FUNCTIONS_HOOK_FUNCS_DEFINED != 1 )); then
+	declare -A hook_funcs
+
+	add_hook() {
+		[[ $1 && $2 ]] || return 1
+		hook_funcs[$1]+=" $2"
+	}
+
+	run_hook() {
+		[[ $1 ]] || return 1
+		local func
+		for func in ${hook_funcs["$1"]}; do
+			"${func}"
+		done
+	}
+
+	declare -fr add_hook run_hook
+	declare -r RC_FUNCTIONS_HOOK_FUNCS_DEFINED=1
+fi
+
+# set colors
+if [[ $USECOLOR != [nN][oO] ]]; then
+	if tput setaf 0 &>/dev/null; then
+		C_CLEAR=$(tput sgr0)                      # clear text
+		C_MAIN=${C_CLEAR}$(tput bold)        # main text
+		C_OTHER=${C_MAIN}$(tput setaf 4)     # prefix & brackets
+		C_SEPARATOR=${C_MAIN}$(tput setaf 0) # separator
+		C_BUSY=${C_CLEAR}$(tput setaf 6)     # busy
+		C_FAIL=${C_MAIN}$(tput setaf 1)      # failed
+		C_DONE=${C_MAIN}                          # completed
+		C_BKGD=${C_MAIN}$(tput setaf 5)      # backgrounded
+		C_H1=${C_MAIN}                            # highlight text 1
+		C_H2=${C_MAIN}$(tput setaf 6)        # highlight text 2
+	else
+		C_CLEAR="\e[m"          # clear text
+		C_MAIN="\e[;1m"         # main text
+		C_OTHER="\e[1;34m"      # prefix & brackets
+		C_SEPARATOR="\e[1;30m"  # separator
+		C_BUSY="\e[;36m"        # busy
+		C_FAIL="\e[1;31m"       # failed
+		C_DONE=${C_MAIN}        # completed
+		C_BKGD="\e[1;35m"       # backgrounded
+		C_H1=${C_MAIN}          # highlight text 1
+		C_H2="\e[1;36m"         # highlight text 2
+	fi
+fi
+
+# prefixes:
+
+PREFIX_REG="::"
+PREFIX_HL=" >"
+
+# Source additional functions at the end to allow overrides
+# for f in @RCDIR@/functions.d/*; do
+# 	[[ -e $f ]] && . "$f"
+# done
+

rc/halt.8

@@ -0,0 +1,67 @@
+.Dd July 29, 2014
+.Dt HALT 8
+.Os Linux
+.Sh NAME
+.Nm halt ,
+.Nm reboot ,
+.Nm poweroff
+.Nd stop the system
+.Sh SYNOPSIS
+.Nm halt
+.Op Fl n
+.Op Fl f
+.Nm reboot
+.Op Fl n
+.Op Fl f
+.Nm poweroff
+.Op Fl n
+.Op Fl f
+.Sh DESCRIPTION
+.Nm halt
+/
+.Nm reboot
+/
+.Nm poweroff
+tells
+.Xr init 8
+to bring down, reboot, or power off the system.
+Without
+.Fl f ,
+it is a shortcut for
+.Nm init 0
+/
+.Nm init 6 .
+.Bl -tag -width indent
+.It Fl n
+Don't sync before reboot or halt.
+Note that the kernel and storage drivers may still sync.
+.It Fl f
+Force halt or reboot, don't call
+.Xr init 8 .
+This is
+.Sy dangerous !
+.El
+.Sh UNSUPPORTED OPTIONS
+This version of
+.Nm
+is based on
+.Xr runit 8 ,
+the following features are
+.Sy not
+supported and silently ignored:
+.Bl -tag -width indent
+.It Fl w
+to just write the wtmp record.
+.It Fl d
+to not write the wtmp record.
+.It Fl h
+to put hard drives in standby mode.
+.It Fl i
+to shut down network interfaces.
+.El
+.Sh SEE ALSO
+.Xr init 8 ,
+.Xr shutdown 8
+.Sh AUTHOR
+.An Leah Neukirchen ,
+.Mt leah@vuxu.org .

rc/halt.c

@@ -0,0 +1,77 @@
+#include <errno.h>
+#include <unistd.h>
+#include <err.h>
+#include <string.h>
+#include <sys/reboot.h>
+
+extern char *__progname;
+
+typedef enum {NOOP, HALT, REBOOT, POWEROFF} action_type;
+
+int main(int argc, char *argv[]) {
+  int do_sync = 1;
+  int do_force = 0;
+  int opt;
+  action_type action = NOOP;
+
+  if (strcmp(__progname, "halt") == 0)
+    action = HALT;
+  else if (strcmp(__progname, "reboot") == 0)
+    action = REBOOT;
+  else if (strcmp(__progname, "poweroff") == 0)
+    action = POWEROFF;
+  else
+    warnx("no default behavior, needs to be called as halt/reboot/poweroff.");
+
+  while ((opt = getopt(argc, argv, "dfhinw")) != -1)
+    switch (opt) {
+    case 'n':
+      do_sync = 0;
+      break;
+    case 'w':
+      action = NOOP;
+      do_sync = 0;
+      break;
+    case 'd':
+    case 'h':
+    case 'i':
+      /* silently ignored.  */
+      break;
+    case 'f':
+      do_force = 1;
+      break;
+    default:
+      errx(1, "Usage: %s [-n] [-f]", __progname);
+    }
+
+  if (do_sync)
+    sync();
+
+  switch (action) {
+  case HALT:
+    if (do_force)
+      reboot(RB_HALT_SYSTEM);
+    else
+      execl("/bin/runit-init", "init", "0", (char*)0);
+    err(1, "halt failed");
+    break;
+  case POWEROFF:
+    if (do_force)
+      reboot(RB_POWER_OFF);
+    else
+      execl("/bin/runit-init", "init", "0", (char*)0);
+    err(1, "poweroff failed");
+    break;
+  case REBOOT:
+    if (do_force)
+      reboot(RB_AUTOBOOT);
+    else
+      execl("/bin/runit-init", "init", "6", (char*)0);
+    err(1, "reboot failed");
+    break;
+  case NOOP:
+    break;
+  }
+
+  return 0;
+}

rc/rc.conf.in

@@ -0,0 +1,13 @@
+# @RCDIR@/rc.conf - system configuration
+
+# Storage
+#
+# USEDMRAID="no"
+# USELVM="no"
+
+# Network
+#
+# interface=
+# address=
+# netmask=
+# gateway=

rc/rc.local.in

@@ -0,0 +1,4 @@
+# Default rc.local; add your custom commands here.
+#
+# This is run by runit in stage 2 before the services are executed
+# (see /etc/runit/2).

rc/shutdown.8

@@ -0,0 +1,90 @@
+.Dd July 29, 2014
+.Dt SHUTDOWN 8
+.Os Linux
+.Sh NAME
+.Nm shutdown
+.Nd bring down the system
+.Sh SYNOPSIS
+.Nm shutdown
+.Op Fl rhP
+.Op Fl fF
+.Op Cm now | Cm + Ns Ar mins
+.Op Ar message ...
+.Sh DESCRIPTION
+.Nm
+brings the system down in a secure way.
+All logged-in users
+are notified that the system is going down, and
+.Xr login 1
+is blocked.
+.Pp
+By default,
+.Nm
+puts the system into single user mode.
+Rebooting and halting the system can be done using the following options:
+.Bl -tag -width indent
+.It Fl c
+Cancel an ongoing shutdown.
+.It Fl f
+Enable fast booting; skip
+.Xr fsck 8
+on next boot.
+.It Fl F
+Force run of
+.Xr fsck 8
+on next boot.
+.It Fl h
+Halt the system.
+.It Fl k
+Don't really shutdown; only send the warning messages to everybody.
+.It Fl P
+Poweroff the system.
+.It Fl r
+Reboot the system.
+.It Cm now
+Shutdown without further waiting.
+.It Cm + Ns Ar mins
+Wait
+.Ar mins
+minutes before shutting down.
+.It Ar message
+Message displayed to all users, defaults to "system is going down".
+.El
+.Sh UNSUPPORTED OPTIONS
+This version of
+.Nm
+is based on
+.Xr runit 8 ,
+the following features are
+.Sy not
+supported:
+.Bl -tag -width indent
+.It Fl t Ar secs
+to wait
+.Ar secs
+seconds between SIGKILL and SIGTERM on shutdown is silently ignored.
+.It Fl a
+Use
+.Pa /etc/shutdown.allow .
+.It Fl H
+Drop into boot monitor.
+.It Fl n
+Don't call
+.Xr init 8 .
+.It Ar hh Ns : Ns Ar mm
+Absolute time specification is not implemented.
+.El
+.Sh EXAMPLES
+Turn off the system:
+.Dl # shutdown -h now
+.Sh SEE ALSO
+.Xr fsck 8 ,
+.Xr halt 8 ,
+.Xr init 8 ,
+.Xr poweroff 8 ,
+.Xr reboot 8 ,
+.Xr runit 8 ,
+.Xr runsvchdir 8
+.Sh AUTHOR
+.An Leah Neukirchen ,
+.Mt leah@vuxu.org .

rc/shutdown.d/01-random-seed.sh

@@ -0,0 +1 @@
+status 'Saving random seed' save_random_seed

rc/shutdown.d/02-timezone.sh

@@ -0,0 +1 @@
+[[ $TIMEZONE ]] && status "Configuring time zone" set_timezone "$TIMEZONE"

rc/shutdown.d/03-wtmp.sh

@@ -0,0 +1,2 @@
+# Write to wtmp file before unmounting
+halt -w

rc/shutdown.d/04-lvm2-monitoring.sh

@@ -0,0 +1,3 @@
+# stop monitoring of LVM2 groups before unmounting filesystems
+[[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) ]] &&
+	status "Deactivating monitoring of LVM2 groups" vgchange --monitor n

rc/shutdown.d/05-udev.sh

@@ -0,0 +1,2 @@
+# any future uevents can and should be ignored
+status "Shutting down udev" udevadm control --exit

rc/shutdown.d/06-kill-all.sh

@@ -0,0 +1,3 @@
+run_hook shutdown_prekillall
+kill_all
+run_hook shutdown_postkillall

rc/shutdown.d/08-swap.sh

@@ -0,0 +1,3 @@
+# almost everything is dead now, so the swap should hopefully be relatively
+# empty, and quick to switch off
+status "Deactivating swap" swapoff -a

rc/shutdown.d/09-umount-api-fs.sh

@@ -0,0 +1,3 @@
+run_hook shutdown_preumount
+status "Unmounting non-API filesystems" umount -r -a -t nosysfs,noproc,nodevtmpfs,notmpfs
+run_hook shutdown_postumount

rc/shutdown.d/10-cryptsetup.sh

@@ -0,0 +1,7 @@
+# Kill non-root encrypted partition mappings
+if [[ -f /etc/crypttab ]] && type -p cryptsetup >/dev/null; then
+	# Maybe someone has LVM on an encrypted block device
+	# executing an extra vgchange is errorless
+	[[ $USELVM = [Yy][Ee][Ss] ]] && vgchange --sysinit -a n &>/dev/null
+	deactivate_crypt
+fi

rc/shutdown.d/11-lvm2.sh

@@ -0,0 +1,2 @@
+[[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) ]] &&
+	status "Deactivating LVM2 groups" vgchange --sysinit -a n &>/dev/null

rc/shutdown.d/12-remount-rootfs-ro.sh

@@ -0,0 +1,2 @@
+status "Remounting root filesystem read-only" \
+    mount -o remount,ro /

rc/shutdown.in

@@ -37,7 +37,7 @@ time=$1; shift
 message="${*:-system is going down}"
 
 if [ "$action" = "cancel" ]; then
-  kill "$(cat /run/runit/shutdown.pid)"
+  kill "$(cat @RUNDIR@/shutdown.pid)"
   if [ -e /etc/nologin ] && ! [ -s /etc/nologin ]; then
     rm /etc/nologin
   fi
@@ -45,8 +45,8 @@ if [ "$action" = "cancel" ]; then
   exit
 fi
 
-touch /run/runit/shutdown.pid 2>/dev/null || abort "Not enough permissions to execute ${0#*/}"
-echo $$ >/run/runit/shutdown.pid
+touch @RUNDIR@/shutdown.pid 2>/dev/null || abort "Not enough permissions to execute ${0#*/}"
+echo $$ >@RUNDIR@/shutdown.pid
 
 case "$time" in
   now) time=0;;

rc/sysinit.d/01-mount-api-fs.sh

@@ -0,0 +1,16 @@
+# mount the API filesystems
+# /proc, /sys, /run, /dev, /run/lock, /dev/pts, /dev/shm
+mountpoint -q /proc    || mount -t proc proc /proc -o nosuid,noexec,nodev
+mountpoint -q /sys     || mount -t sysfs sys /sys -o nosuid,noexec,nodev
+mountpoint -q /run     || mount -t tmpfs run /run -o mode=0755,nosuid,nodev
+mountpoint -q /dev     || mount -t devtmpfs dev /dev -o mode=0755,nosuid
+mkdir -p /dev/{pts,shm}
+mountpoint -q /dev/pts || mount -t devpts devpts /dev/pts -o mode=0620,gid=5,nosuid,noexec
+mountpoint -q /dev/shm || mount -t tmpfs shm /dev/shm -o mode=1777,nosuid,nodev
+mountpoint -q /sys/kernel/security || mount -n -t securityfs securityfs /sys/kernel/security
+mountpoint -q /sys/firmware/efi/efivars || mount -n -t efivarfs -o ro efivarfs /sys/firmware/efi/efivars
+mountpoint -q /sys/fs/cgroup || mount -o mode=0755 -t tmpfs cgroup /sys/fs/cgroup
+mountpoint -q /sys/fs/cgroup/openrc || mkdir -p /sys/fs/cgroup/openrc && mount -t cgroup -o none,name=openrc cgroup /sys/fs/cgroup/openrc
+awk '$4 == 1 { system("mountpoint -q /sys/fs/cgroup/" $1 " || { mkdir -p /sys/fs/cgroup/" $1 " && mount -t cgroup -o " $1 " cgroup /sys/fs/cgroup/" $1 " ;}" ) }' /proc/cgroups
+
+findmnt / --options ro &>/dev/null || status "Mounting root read-only" mount -o remount,ro /

rc/sysinit.d/02-hostname.sh

@@ -0,0 +1,10 @@
+unset HOSTNAME
+
+if [[ -s /etc/hostname ]]; then
+	HOSTNAME=$(< /etc/hostname)
+fi
+
+if [[ $HOSTNAME ]]; then
+	stat_busy "Setting hostname: $HOSTNAME"
+	echo "$HOSTNAME" >| /proc/sys/kernel/hostname && stat_done || stat_fail
+fi

rc/sysinit.d/03-hwclock.sh

@@ -0,0 +1,34 @@
+HWCLOCK_PARAMS="--systz"
+
+if [[ $HARDWARECLOCK ]]; then
+
+	[[ -f /etc/adjtime ]] && { read ; read ; read ADJTIME; } < /etc/adjtime
+
+	if [[ $ADJTIME == 'LOCAL' ]]; then
+		if	[[ $HARDWARECLOCK == 'UTC' ]]; then
+			printf "${C_FAIL}@RCDIR@/rc.conf says the RTC is in UTC, but /etc/adjtime says it is in localtime.\n${C_OTHER}."
+		fi
+	else
+		if [[ $HARDWARECLOCK == 'LOCALTIME' ]]; then
+			printf "${C_FAIL}@RCDIR@/rc.conf says the RTC is in localtime, but hwclock (/etc/adjtime) thinks it is in UTC.\n${C_OTHER}."
+		fi
+	fi
+
+	case $HARDWARECLOCK in
+		UTC) HWCLOCK_PARAMS+=" --utc --noadjfile";;
+		localtime) HWCLOCK_PARAMS+=" --localtime --noadjfile";;
+		*) HWCLOCK_PARAMS="";;
+	esac
+fi
+
+if [[ $HWCLOCK_PARAMS ]]; then
+	stat_busy "Adjusting system time and setting kernel time zone"
+
+	# Adjust the system time for time zone offset if rtc is not in UTC, as
+	# filesystem checks can depend on system time. This also sets the kernel
+	# time zone, used by e.g. vfat.
+
+	hwclock $HWCLOCK_PARAMS && stat_done || stat_fail
+
+	unset TZ
+fi

rc/sysinit.d/04-kmod-static-nodes.sh

@@ -0,0 +1 @@
+status "Creating list of required static device nodes" mk_kmod_static_nodes

rc/sysinit.d/05-tmpfiles-dev.sh

@@ -0,0 +1 @@
+status "Setting up tmpfiles.d entries for /dev" mk_tmpfiles_dev

rc/sysinit.d/06-udev-modprobe.sh

@@ -0,0 +1,2 @@
+# Start/trigger udev, load MODULES, and settle udev
+udevd_modprobe sysinit

rc/sysinit.d/07-console-setup.sh

@@ -0,0 +1,2 @@
+# this must be done after udev has loaded the KMS modules
+status 'Configuring virtual consoles' console_setup

rc/sysinit.d/08-net-lo.sh

@@ -0,0 +1,2 @@
+# bring up the loopback interface
+[[ -d /sys/class/net/lo ]] && status "Bringing up loopback interface" ip link set up dev lo

rc/sysinit.d/09-dmraid.sh

@@ -0,0 +1,3 @@
+# FakeRAID devices detection
+[[ $USEDMRAID = [Yy][Ee][Ss] && -x $(type -P dmraid) ]] &&
+	status "Activating FakeRAID arrays" dmraid -i -ay

rc/sysinit.d/10-lvm2.sh

@@ -0,0 +1,2 @@
+# Activate LVM2 groups, if any
+activate_vgs

rc/sysinit.d/11-cryptsetup.sh

@@ -0,0 +1,6 @@
+# Set up non-root encrypted partition mappings
+if [[ -f /etc/crypttab ]] && type -p cryptsetup >/dev/null; then
+	status "Activating encrypted devices" awk -f /etc/rc/crypt.awk /etc/crypttab
+	# Maybe someone has LVM on an encrypted block device
+	activate_vgs
+fi

rc/sysinit.d/12-fsck.sh

@@ -0,0 +1,13 @@
+run_hook sysinit_prefsck
+if [[ -x $(type -P fsck) ]]; then
+	stat_busy "Checking filesystems"
+		fsck_all >|"${FSCK_OUT:-/dev/stdout}" 2>|"${FSCK_ERR:-/dev/stdout}"
+	declare -r fsckret=$?
+	(( fsckret <= 1 )) && stat_done || stat_fail
+else
+	declare -r fsckret=0
+fi
+# Single-user login and/or automatic reboot if needed
+run_hook sysinit_postfsck
+
+fsck_reboot $fsckret

rc/sysinit.d/13-remount-api-fs.sh

@@ -0,0 +1,2 @@
+status "Remounting root and API filesystems" \
+	mount -o remount,rw /

rc/sysinit.d/14-mount-local-fs.sh

@@ -0,0 +1,4 @@
+run_hook sysinit_premount
+status "Mounting local filesystems" \
+	mount_all
+run_hook sysinit_postmount

rc/sysinit.d/15-lvm2-monitoring.sh

@@ -0,0 +1,4 @@
+# Enable monitoring of LVM2 groups, now that the filesystems are mounted rw
+[[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) && -d /sys/block ]] &&
+	status "Activating monitoring of LVM2 groups" \
+		vgchange --monitor y >/dev/null

rc/sysinit.d/16-swap.sh

@@ -0,0 +1 @@
+status "Activating swap" swapon -a

rc/sysinit.d/17-timezone.sh

@@ -0,0 +1 @@
+[[ $TIMEZONE ]] && status "Configuring time zone" set_timezone "$TIMEZONE"

rc/sysinit.d/18-random-seed.sh

@@ -0,0 +1 @@
+status 'Initializing random seed' init_random_seed

rc/sysinit.d/19-tmpfiles-setup.sh

@@ -0,0 +1 @@
+status "Setting up tmpfiles.d entries" mk_tmpfiles_setup

rc/sysinit.d/20-sysusers.sh

@@ -0,0 +1 @@
+status "Setting up sysusers.d entries" mk_sysusers

rc/sysinit.d/21-dmesg-log.sh

@@ -0,0 +1,8 @@
+stat_busy "Saving dmesg log"
+	if [[ -e /proc/sys/kernel/dmesg_restrict ]] &&
+		(( $(< /proc/sys/kernel/dmesg_restrict) == 1 )); then
+		install -Tm 0600 <( dmesg ) /var/log/dmesg.log
+	else
+		install -Tm 0644 <( dmesg ) /var/log/dmesg.log
+	fi
+(( $? == 0 )) && stat_done || stat_fail