ctrlaltdel: trigger a reboot properly.

/run/runit/{stopit,reboot} should have their perms set to 100 by
ctrlaltdel, before runit signals itself with SIGCONT, in order to
trigger a reboot. This script can be changed by a user to perform
different actions. The comments in it explain what each file is for.

Patch created for Void, imported to Artix.

1.in

@@ -1,27 +0,0 @@
-#!/bin/bash
-
-PATH=/usr/bin:/usr/sbin
-
-. @RCDIR@/rc.conf
-. @RCDIR@/functions
-
-# Prints distro name and URL
-print_welcome
-
-# log all console messages
-bootlogd_start
-
-run_hook sysinit_start
-
-for sysinit in @RCDIR@/sysinit.d/*; do
-	. $sysinit
-done
-
-# Remove leftover files
-# remove_leftover
-
-run_hook sysinit_end
-
-install -m100 /dev/null @RUNDIR@/stopit
-
-status "Initialization complete"

3.in

@@ -1,35 +0,0 @@
-#!/bin/bash
-
-PATH=/usr/bin:/usr/sbin
-
-. @RCDIR@/rc.conf
-. @RCDIR@/functions
-. @RCDIR@/rc.shutdown
-
-status "Stop services ..." sv force-stop @RUNDIR@/service/*
-status "Exit services ..." sv exit @RUNDIR@/service/*
-
-if [ -e @RUNDIR@/reboot ]; then
-    chmod 100 @RUNDIR@/reboot
-fi
-
-# avoid staircase effect
-stty onlcr
-
-echo " "
-printhl "Initiating shutdown..."
-echo " "
-
-run_hook shutdown_start
-
-for shutdown in @RCDIR@/shutdown.d/*; do
-	. $shutdown
-done
-
-run_hook shutdown_poweroff
-
-if [ -e @RUNDIR@/reboot ]; then
-    [[ -x $(type -P kexec) ]] && kexec -e &>/dev/null
-fi
-
-status "Stage 3 completed."

COPYING

@@ -0,0 +1,24 @@
+Copyright (C) 2018 Muhammad Herdiansyah
+Copyright (C) 2018 Artix Linux Developers
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.

Makefile

@@ -3,20 +3,79 @@ PREFIX ?= /usr
 BINDIR = $(PREFIX)/bin
 MANDIR = $(PREFIX)/share/man
 LIBDIR = $(PREFIX)/lib
-TMPFILESDIR = $(LIBDIR)/tmpfiles.d
+RCLIBDIR = $(LIBDIR)/rc
+
+########### runit ###########
+
+RCDIR = $(SYSCONFDIR)/rc
 RUNITDIR = $(SYSCONFDIR)/runit
 SVDIR = $(RUNITDIR)/sv
 RUNSVDIR = $(RUNITDIR)/runsvdir
 SERVICEDIR = /etc/service
 RUNDIR = /run/runit
-RCBINDIR = $(PREFIX)/lib/rc/bin
+TMPFILESDIR = $(LIBDIR)/tmpfiles.d
-RCDIR = $(SYSCONFDIR)/rc
 
-TMPFILES = tmpfile.conf
 
-BIN = zzz pause modules-load
+TMPFILES = misc/tmpfile.conf
 
-STAGES = 1 2 3 ctrlaltdel
+BIN = script/zzz src/pause
+
+STAGES = \
+	script/1 \
+	script/2 \
+	script/3 \
+	script/ctrlaltdel
+
+RCLOCAL = script/rc.local script/rc.shutdown
+
+AGETTY_CONSOLE = $(wildcard sv/agetty-console/*)
+AGETTY_CONSOLE_S = supervise.agetty-console
+
+AGETTY_GENERIC = $(wildcard sv/agetty-generic/*)
+
+AGETTY_SERIAL = $(wildcard sv/agetty-serial/*)
+
+AGETTY_TTY1 = $(wildcard sv/agetty-tty1/*)
+AGETTY_TTY1_S = supervise.agetty-tty1
+
+AGETTY_TTY2 = $(wildcard sv/agetty-tty2/*)
+AGETTY_TTY2_S = supervise.agetty-tty2
+
+AGETTY_TTY3 = $(wildcard sv/agetty-tty3/*)
+AGETTY_TTY3_S = supervise.agetty-tty3
+
+AGETTY_TTY4 = $(wildcard sv/agetty-tty4/*)
+AGETTY_TTY4_S = supervise.agetty-tty4
+
+AGETTY_TTY5 = $(wildcard sv/agetty-tty5/*)
+AGETTY_TTY5_S = supervise.agetty-tty5
+
+AGETTY_TTY6 = $(wildcard sv/agetty-tty6/*)
+AGETTY_TTY6_S = supervise.agetty-tty6
+
+AGETTY_TTYAMA0 = $(wildcard sv/agetty-ttyAMA0/*)
+AGETTY_TTYAMA0_S = supervise.agetty-ttyAMA0
+
+AGETTY_TTYS0 = $(wildcard sv/agetty-ttyS0/*)
+AGETTY_TTYS0_S = supervise.agetty-ttyS0
+
+AGETTY_TTYUSB0 = $(wildcard sv/agetty-ttyUSB0/*)
+AGETTY_TTYUSB0_S = supervise.agetty-ttyUSB0
+
+AGETTY_SULOGIN = $(wildcard sv/sulogin/*)
+AGETTY_SULOGIN_S = supervise.sulogin
+
+AGETTY_SYMS = \
+	agetty-tty1 \
+	agetty-tty2 \
+	agetty-tty3 \
+	agetty-tty4 \
+	agetty-tty5 \
+	agetty-tty6
+
+SULOGIN_SYM = sulogin
+
+########### end ###########
 
 LN = ln -sf
 CP = cp -R --no-dereference --preserve=mode,links -v
@@ -26,14 +85,14 @@ M4 = m4 -P
 CHMODAW = chmod a-w
 CHMODX = chmod +x
 
-HASRC = yes
-
 EDIT = sed \
+	-e "s|@RCDIR[@]|$(RCDIR)|g" \
 	-e "s|@RUNITDIR[@]|$(RUNITDIR)|g" \
 	-e "s|@SERVICEDIR[@]|$(SERVICEDIR)|g" \
 	-e "s|@RUNSVDIR[@]|$(RUNSVDIR)|g" \
 	-e "s|@RUNDIR[@]|$(RUNDIR)|g" \
-	-e "s|@RCDIR[@]|$(RCDIR)|g"
+	-e "s|@SYSCONFDIR[@]|$(SYSCONFDIR)|g" \
+	-e "s|@RCLIBDIR[@]|$(RCLIBDIR)|g"
 
 %: %.in Makefile
 	@echo "GEN $@"
@@ -42,34 +101,25 @@ EDIT = sed \
 	@$(CHMODAW) "$@"
 	@$(CHMODX) "$@"
 
-
-
 all: all-runit
 
-ifeq ($(HASRC),yes)
+all-runit: $(STAGES) $(RCLOCAL)
-
+		$(CC) $(CFLAGS) src/pause.c -o src/pause $(LDFLAGS)
-all: all-rc
-
-endif
-
-all-runit: $(STAGES)
-		$(CC) $(CFLAGS) pause.c -o pause $(LDFLAGS)
-
-all-rc:
-	make RCDIR=$(RCDIR) -C rc
 
 install-runit:
 	install -d $(DESTDIR)$(RUNITDIR)
 	install -m755 $(STAGES) $(DESTDIR)$(RUNITDIR)
 
+	install -d $(DESTDIR)$(RUNSVDIR)/single
+
+	install -d $(DESTDIR)$(RUNSVDIR)/default
+	$(LN) default $(DESTDIR)$(RUNSVDIR)/current
+
 	$(LN) $(RUNDIR)/reboot $(DESTDIR)$(RUNITDIR)/
 	$(LN) $(RUNDIR)/stopit $(DESTDIR)$(RUNITDIR)/
 
-	install -d $(DESTDIR)$(SVDIR)
+	install -d $(DESTDIR)$(RCDIR)
-	$(CP) sv/* $(DESTDIR)$(SVDIR)/
+	install -m755 $(RCLOCAL) $(DESTDIR)$(RCDIR)
-
-	install -d $(DESTDIR)$(RUNSVDIR)
-	$(CP) runsvdir/* $(DESTDIR)$(RUNSVDIR)/
 
 	install -d $(DESTDIR)$(BINDIR)
 	install -m755 $(BIN) $(DESTDIR)$(BINDIR)
@@ -77,33 +127,69 @@ install-runit:
 	install -d $(DESTDIR)$(TMPFILESDIR)
 	install -m755 $(TMPFILES) $(DESTDIR)$(TMPFILESDIR)/runit.conf
 
-	install -d $(DESTDIR)$(MANDIR)/man1
+	install -d $(DESTDIR)$(SVDIR)/agetty-console
-	install -m644 pause.1 $(DESTDIR)$(MANDIR)/man1
+	install -Dm755 $(AGETTY_CONSOLE) $(DESTDIR)$(SVDIR)/agetty-console
-	install -d $(DESTDIR)$(MANDIR)/man8
+	$(LN) $(RUNDIR)/$(AGETTY_CONSOLE_S) $(DESTDIR)$(SVDIR)/agetty-console/supervise
-	install -m644 zzz.8 $(DESTDIR)$(MANDIR)/man8/zzz.8
-	install -m644 modules-load.8 $(DESTDIR)$(MANDIR)/man8
 
-install-rc:
+	install -d $(DESTDIR)$(SVDIR)/agetty-generic
-	make install BINDIR=$(BINDIR) RCDIR=$(RCDIR) RCBINDIR=$(RCBINDIR) MANDIR=$(MANDIR) DESTDIR=$(DESTDIR) -C rc
+	install -Dm755 $(AGETTY_GENERIC) $(DESTDIR)$(SVDIR)/agetty-generic
+
+	install -d $(DESTDIR)$(SVDIR)/agetty-serial
+	install -Dm755 $(AGETTY_SERIAL) $(DESTDIR)$(SVDIR)/agetty-serial
+
+	install -d $(DESTDIR)$(SVDIR)/agetty-tty1
+	install -Dm755 $(AGETTY_TTY1) $(DESTDIR)$(SVDIR)/agetty-tty1
+	$(LN) $(RUNDIR)/$(AGETTY_TTY1_S) $(DESTDIR)$(SVDIR)/agetty-tty1/supervise
+#
+	install -d $(DESTDIR)$(SVDIR)/agetty-tty2
+	install -Dm755 $(AGETTY_TTY2) $(DESTDIR)$(SVDIR)/agetty-tty2
+	$(LN) $(RUNDIR)/$(AGETTY_TTY2_S) $(DESTDIR)$(SVDIR)/agetty-tty2/supervise
+
+	install -d $(DESTDIR)$(SVDIR)/agetty-tty3
+	install -Dm755 $(AGETTY_TTY3) $(DESTDIR)$(SVDIR)/agetty-tty3
+	$(LN) $(RUNDIR)/$(AGETTY_TTY3_S) $(DESTDIR)$(SVDIR)/agetty-tty3/supervise
+
+	install -d $(DESTDIR)$(SVDIR)/agetty-tty4
+	install -Dm755 $(AGETTY_TTY4) $(DESTDIR)$(SVDIR)/agetty-tty4
+	$(LN) $(RUNDIR)/$(AGETTY_TTY4_S)  $(DESTDIR)$(SVDIR)/agetty-tty4/supervise
+
+	install -d $(DESTDIR)$(SVDIR)/agetty-tty5
+	install -Dm755 $(AGETTY_TTY5) $(DESTDIR)$(SVDIR)/agetty-tty5
+	$(LN) $(RUNDIR)/$(AGETTY_TTY5_S) $(DESTDIR)$(SVDIR)/agetty-tty5/supervise
+
+	install -d $(DESTDIR)$(SVDIR)/agetty-tty6
+	install -Dm755 $(AGETTY_TTY6) $(DESTDIR)$(SVDIR)/agetty-tty6
+	$(LN) $(RUNDIR)/$(AGETTY_TTY6_S) $(DESTDIR)$(SVDIR)/agetty-tty6/supervise
+
+	install -d $(DESTDIR)$(SVDIR)/agetty-ttyAMA0
+	install -Dm755 $(AGETTY_TTYAMA0) $(DESTDIR)$(SVDIR)/agetty-ttyAMA0
+	$(LN) $(RUNDIR)/$(AGETTY_TTYAMA0_S) $(DESTDIR)$(SVDIR)/agetty-ttyAMA0/supervise
+
+	install -d $(DESTDIR)$(SVDIR)/agetty-ttyS0
+	install -Dm755 $(AGETTY_TTYS0) $(DESTDIR)$(SVDIR)/agetty-ttyS0
+	$(LN) $(RUNDIR)/$(AGETTY_TTYS0_S) $(DESTDIR)$(SVDIR)/agetty-ttyS0/supervise
+
+	install -d $(DESTDIR)$(SVDIR)/agetty-ttyUSB0
+	install -Dm755 $(AGETTY_TTYUSB0) $(DESTDIR)$(SVDIR)/agetty-ttyUSB0
+	$(LN) $(RUNDIR)/$(AGETTY_TTYUSB0_S) $(DESTDIR)$(SVDIR)/agetty-ttyUSB0/supervise
+
+	install -d $(DESTDIR)$(SVDIR)/sulogin
+	install -Dm755 $(AGETTY_SULOGIN) $(DESTDIR)$(SVDIR)/sulogin
+	$(LN) $(RUNDIR)/$(AGETTY_SULOGIN_S) $(DESTDIR)$(SVDIR)/sulogin/supervise
+
+	for g in $(AGETTY_SYMS); do $(LN) $(SVDIR)/$$g $(DESTDIR)$(RUNSVDIR)/default/$$g; done
+	for g in $(SULOGIN_SYM); do $(LN) $(SVDIR)/$$g $(DESTDIR)$(RUNSVDIR)/single/$$g; done
+
+	install -d $(DESTDIR)$(MANDIR)/man1
+	install -m644 man/pause.1 $(DESTDIR)$(MANDIR)/man1
+	install -d $(DESTDIR)$(MANDIR)/man8
+	install -m644 man/zzz.8 $(DESTDIR)$(MANDIR)/man8/zzz.8
 
 install: install-runit
-ifeq ($(HASRC),yes)
-install: install-rc
-endif
 
 clean-runit:
-	-rm -f pause
+	-$(RM) src/pause $(STAGES) $(RCLOCAL)
-	-rm -f $(STAGES)
-
-clean-rc:
-	make -C rc clean
 
 clean: clean-runit
-ifeq ($(HASRC),yes)
-clean: clean-rc
-endif
 
-clean:
+.PHONY: all install clean install-runit clean-runit
-
-
-.PHONY: all install clean install-runit install-rc clean-runit clean-rc all-runit all-rc

README.md

@@ -1,21 +1,11 @@
-## Runit init scripts for Artix Linux
+## Supplemental files for runit in Artix
 
-This repository contains the runit init scripts for the Artix Linux
+These files are supplements for runit implementation in Artix Linux.
-distribution.
-
-This work is based on Void Linux's
-[void-runit](https://github.com/voidlinux/void-runit). Patches to Void
-Linux's repo will also be applied here.
 
 ## Dependencies
 
-- GNU coreutils
-- A POSIX shell
-- A POSIX awk
-- procps-ng (needs pkill -s0,1)
 - runit
-- opentmpfiles
+- runit-rc (https://github.com/artix-linux/runit-rc)
-- opensysusers
 
 ### How to use it
 
@@ -43,9 +33,7 @@ Feel free to send patches and contribute with improvements!
 
 ## Copyright
 
-runit-artix is in the public domain.
+Some codes are based on void-runit, which is licensed under CC0-1.0
 
-To the extent possible under law, the creator of this work has waived
+The rest of runit-artix is licensed under the terms as described in the
-all copyright and related or neighboring rights to this work.
+COPYING file.
-
-http://creativecommons.org/publicdomain/zero/1.0/

crypt.awk

@@ -1,103 +0,0 @@
-/^#/ || /^$/ { next }
-NF>4 { print "a valid crypttab has max 4 cols not " NF >"/dev/stderr"; next }
-{
-    # decode the src variants
-    split($2, o_src, "=")
-    if (o_src[1] == "UUID") ("blkid -l -o device -t " $2) | getline src;
-    else src=o_src[1];
-
-    # no password or none is given, ask fo it
-    if ( NF == 2 ) {
-        ccmd="cryptsetup luksOpen " src " " $1;
-        system(ccmd);
-        ccmd="";
-    }
-    else if (NF == 3 ) {
-        dest=$1
-        key=$3
-        split($3, po, "=");
-        if ( po[1] == "none") ccmd="cryptsetup luksOpen " src " " dest;
-        else ccmd="cryptsetup luksOpen -d " key " " src" " dest;
-        system(ccmd);
-        ccmd="";
-    }
-    else {
-    # the option field is not empty parse the options
-        dest=$1
-        key=$3
-        split($4, opts, ",");
-        commonopts="";
-        swapopts="";
-        luksopts="";
-        for(i in opts) {
-            split(opts[i], para, "=");
-            par=para[1];
-            val=para[2];
-            if ( par == "readonly" || par == "read-only") commonopts=commonopts "-r ";
-            else if ( par == "discard" ) commonopts=commonopts "--allow-discards ";
-            else if ( par == "tries" ) commonopts=commonopts "-T " val " ";
-            else if ( par == "swap" ) makeswap="y";
-            else if ( par == "cipher" ) swapopts=swapopts "-c " val " ";
-            else if ( par == "size" ) swapopts=swapopts "-s " val " ";
-            else if ( par == "hash" ) swapopts=swapopts "-h " val " ";
-            else if ( par == "offset" ) swapopts=swapopts "-o " val " ";
-            else if ( par == "skip" ) swapopts=swapopts "-p " val " ";
-            else if ( par == "verify" ) swapopts=swapopts "-y ";
-            #else if ( par == "noauto" )
-            #else if ( par == "nofail" )
-            #else if ( par == "plain" )
-            #else if ( par == "timeout" )
-            #else if ( par == "tmp" )
-            else if ( par == "luks" ) use_luks="y";
-            else if ( par == "keyscript" ) {use_keyscript="y"; keyscript=val;}
-            else if ( par == "keyslot" || par == "key-slot" ) luksopts=luksopts "-S " val " ";
-            else if ( par == "keyfile-size" ) luksopts=luksopts "-l " val " ";
-            else if ( par == "keyfile-offset" ) luksopts=luksopts "-keyfile-offset=" val " ";
-            else if ( par == "header" ) luksopts=luksopts "--header=" val " ";
-            else {
-                print "option: " par " not supported " >"/dev/stderr";
-                makeswap="";
-                use_luks="";
-                use_keyscript="";
-                next;
-            }
-        }
-        if ( makeswap == "y" && use_luks != "y" ) {
-            ccmd="cryptsetup " swapopts commonopts "-d " key " create " dest " " src;
-            ccmd_2="mkswap /dev/mapper/" dest;
-            makeswap="";
-            use_luks=""; 
-            use_keyscript="";
-            system(ccmd);
-            system(ccmd_2);
-            ccmd="";
-            ccmd_2="";
-            next;
-        }
-        if ( use_luks == "y" && makeswap != "y" ){
-            if ( use_keyscript == "y") {
-                ccmd=keyscript " | cryptsetup " luksopts commonopts "luksOpen -d - " src " " dest;
-                use_keyscript="";
-            }
-            else {
-                if ( key == "none" ){
-                    ccmd="cryptsetup " luksopts commonopts "luksOpen " src " " dest;
-                }
-                else {
-                    ccmd="cryptsetup " luksopts commonopts "luksOpen -d " key " " src " " dest;
-                }
-            }
-        }
-        else {
-            print "use swap OR luks as option" >"/dev/stderr";
-            ccmd="";
-        }
-        makeswap="";
-        use_luks="";
-        use_keyscript="";
-        if ( ccmd != ""){
-            system(ccmd);
-            ccmd=""
-        }
-    }
-}

halt.8

@@ -1,67 +0,0 @@
-.Dd July 29, 2014
-.Dt HALT 8
-.Os Linux
-.Sh NAME
-.Nm halt ,
-.Nm reboot ,
-.Nm poweroff
-.Nd stop the system
-.Sh SYNOPSIS
-.Nm halt
-.Op Fl n
-.Op Fl f
-.Nm reboot
-.Op Fl n
-.Op Fl f
-.Nm poweroff
-.Op Fl n
-.Op Fl f
-.Sh DESCRIPTION
-.Nm halt
-/
-.Nm reboot
-/
-.Nm poweroff
-tells
-.Xr init 8
-to bring down, reboot, or power off the system.
-Without
-.Fl f ,
-it is a shortcut for
-.Nm init 0
-/
-.Nm init 6 .
-.Bl -tag -width indent
-.It Fl n
-Don't sync before reboot or halt.
-Note that the kernel and storage drivers may still sync.
-.It Fl f
-Force halt or reboot, don't call
-.Xr init 8 .
-This is
-.Sy dangerous !
-.El
-.Sh UNSUPPORTED OPTIONS
-This version of
-.Nm
-is based on
-.Xr runit 8 ,
-the following features are
-.Sy not
-supported and silently ignored:
-.Bl -tag -width indent
-.It Fl w
-to just write the wtmp record.
-.It Fl d
-to not write the wtmp record.
-.It Fl h
-to put hard drives in standby mode.
-.It Fl i
-to shut down network interfaces.
-.El
-.Sh SEE ALSO
-.Xr init 8 ,
-.Xr shutdown 8
-.Sh AUTHOR
-.An Leah Neukirchen ,
-.Mt leah@vuxu.org .

halt.c

@@ -1,77 +0,0 @@
-#include <errno.h>
-#include <unistd.h>
-#include <err.h>
-#include <string.h>
-#include <sys/reboot.h>
-
-extern char *__progname;
-
-typedef enum {NOOP, HALT, REBOOT, POWEROFF} action_type;
-
-int main(int argc, char *argv[]) {
-  int do_sync = 1;
-  int do_force = 0;
-  int opt;
-  action_type action = NOOP;
-
-  if (strcmp(__progname, "halt") == 0)
-    action = HALT;
-  else if (strcmp(__progname, "reboot") == 0)
-    action = REBOOT;
-  else if (strcmp(__progname, "poweroff") == 0)
-    action = POWEROFF;
-  else
-    warnx("no default behavior, needs to be called as halt/reboot/poweroff.");
-
-  while ((opt = getopt(argc, argv, "dfhinw")) != -1)
-    switch (opt) {
-    case 'n':
-      do_sync = 0;
-      break;
-    case 'w':
-      action = NOOP;
-      do_sync = 0;
-      break;
-    case 'd':
-    case 'h':
-    case 'i':
-      /* silently ignored.  */
-      break;
-    case 'f':
-      do_force = 1;
-      break;
-    default:
-      errx(1, "Usage: %s [-n] [-f]", __progname);
-    }
-
-  if (do_sync)
-    sync();
-
-  switch (action) {
-  case HALT:
-    if (do_force)
-      reboot(RB_HALT_SYSTEM);
-    else
-      execl("/bin/runit-init", "init", "0", (char*)0);
-    err(1, "halt failed");
-    break;
-  case POWEROFF:
-    if (do_force)
-      reboot(RB_POWER_OFF);
-    else
-      execl("/bin/runit-init", "init", "0", (char*)0);
-    err(1, "poweroff failed");
-    break;
-  case REBOOT:
-    if (do_force)
-      reboot(RB_AUTOBOOT);
-    else
-      execl("/bin/runit-init", "init", "6", (char*)0);
-    err(1, "reboot failed");
-    break;
-  case NOOP:
-    break;
-  }
-
-  return 0;
-}

modules-load

@@ -1,19 +0,0 @@
-#!/bin/sh
-# modules-load [-n] [-v] - modules-load.d(5) compatible kernel module loader
-
-export PATH=/bin:/sbin
-
-{
-# Parameters passed as modules-load= or rd.modules-load= in kernel command line.
-sed -nr 's/,/\n/;s/(.* |^)(rd\.)?modules-load=([^ ]*).*/\3/p' /proc/cmdline
-
-# Find files /{etc,run,usr/lib}/modules-load.d/*.conf in that order.
-find -L /etc/modules-load.d /run/modules-load.d /usr/lib/modules-load.d \
-       	-maxdepth 1 -name '*.conf' -printf '%p %P\n' 2>/dev/null |
-# Load each basename only once.
-	sort -k2 -s | uniq -f1 | cut -d' ' -f1 |
-# Read the files, output all non-empty, non-comment lines.
-	tr '\012' '\0' | xargs -0 -r grep -h -v -e '^[#;]' -e '^$'
-} |
-# Call modprobe on the list of modules
-tr '\012' '\0' | xargs -0 -r modprobe -ab "$@"

modules-load.8

@@ -1,52 +0,0 @@
-.Dd June 1, 2016
-.Dt MODULES-LOAD 8
-.Os Linux
-.Sh NAME
-.Nm modules-load
-.Nd Configure kernel modules to load at boot
-.Sh SYNOPSIS
-.Nm modules-load
-.Op Fl nv
-.Sh DESCRIPTION
-.Nm
-reads files which contain kernel modules to load during boot from the list of
-locations below.
-.Bl -tag -width indent
-.It Fl n
-dry-run mode.
-This option does everything but actually insert or delete the modules.
-.It Fl v
-verbose mode.
-Print messages about what the program is doing.
-.El
-.Sh FILES
-Configuration files are read from the following locations:
-.Bl -tag -width indent
-.It /etc/modules-load.d/*.conf
-.It /run/modules-load.d/*.conf
-.It /usr/lib/modules-load.d/*.conf
-.El
-.Pp
-The configuration files should simply contain a list of kernel module names
-to load, separated by newlines.
-Empty lines and lines whose first non-whitespace character is # or ; are
-ignored.
-.Sh EXAMPLES
-.Pa /etc/modules-load.d/virtio-net.conf :
-.Bd -literal -offset indent
-# Load virtio-net.ko at boot
-virtio-net
-.Ed
-.Sh SEE ALSO
-.Xr modprobe 8
-.Sh HISTORY
-This program is a replacement for the
-.Nm modules-load
-utility provided by
-.Nm systemd .
-.Sh AUTHOR
-.An Leah Neukirchen ,
-.Mt leah@vuxu.org .
-.Sh LICENSE
-.Nm
-is in the public domain.

rc.local

@@ -1,4 +0,0 @@
-# Default rc.local; add your custom commands here.
-#
-# This is run by runit in stage 2 before the services are executed
-# (see /etc/runit/2).

rc/Makefile

@@ -1,55 +0,0 @@
-RCBIN = halt shutdown
-RC = rc.local rc.shutdown functions rc.conf
-
-LN = ln -sf
-RM = rm -f
-M4 = m4 -P
-CHMODAW = chmod a-w
-CHMODX = chmod +x
-
-EDIT = sed -e "s|@RCDIR[@]|$(RCDIR)|g"
-
-%: %.in Makefile
-	@echo "GEN $@"
-	@$(RM) "$@"
-	@$(M4) $@.in | $(EDIT) >$@
-	@$(CHMODAW) "$@"
-	@$(CHMODX) "$@"
-
-all:	$(RC) shutdown
-	$(CC) $(CFLAGS) halt.c -o halt $(LDFLAGS)
-
-install:
-	install -d $(DESTDIR)$(RCDIR)
-	install -d $(DESTDIR)$(RCDIR)/sysinit.d
-	install -d $(DESTDIR)$(RCDIR)/shutdown.d
-	install -m755 $(RC) $(DESTDIR)$(RCDIR)
-	install -m644 sysinit.d/* $(DESTDIR)$(RCDIR)/sysinit.d
-	install -m644 shutdown.d/* $(DESTDIR)$(RCDIR)/shutdown.d
-	install -m644 crypt.awk $(DESTDIR)$(RCDIR)
-
-	install -d $(DESTDIR)$(RCBINDIR)
-	install -m644 $(RCBIN) $(DESTDIR)$(RCBINDIR)
-
-	$(LN) halt $(DESTDIR)$(RCBINDIR)/poweroff
-	$(LN) halt $(DESTDIR)$(RCBINDIR)/reboot
-
-
-install_sysv:
-	install -d $(DESTDIR)$(BINDIR)
-	$(LN) runit-init $(DESTDIR)$(BINDIR)/init
-	$(LN) $(RCBINDIR)/halt $(DESTDIR)$(BINDIR)/halt
-	$(LN) $(RCBINDIR)/shutdown $(DESTDIR)$(BINDIR)/shutdown
-	$(LN) halt $(DESTDIR)$(BINDIR)/poweroff
-	$(LN) halt $(DESTDIR)$(BINDIR)/reboot
-	install -d $(DESTDIR)$(MANDIR)/man8
-	install -m644 shutdown.8 $(DESTDIR)$(MANDIR)/man8/shutdown.8
-	install -m644 halt.8 $(DESTDIR)$(MANDIR)/man8/halt.8
-	$(LN) halt.8 $(DESTDIR)$(MANDIR)/man8/poweroff.8
-	$(LN) halt.8 $(DESTDIR)$(MANDIR)/man8/reboot.8
-
-clean:
-	-rm -f halt
-	-rm -f shutdown $(RC)
-
-.PHONY: all install install_sysv clean

rc/crypt.awk

@@ -1,103 +0,0 @@
-/^#/ || /^$/ { next }
-NF>4 { print "a valid crypttab has max 4 cols not " NF >"/dev/stderr"; next }
-{
-    # decode the src variants
-    split($2, o_src, "=")
-    if (o_src[1] == "UUID") ("blkid -l -o device -t " $2) | getline src;
-    else src=o_src[1];
-
-    # no password or none is given, ask fo it
-    if ( NF == 2 ) {
-        ccmd="cryptsetup luksOpen " src " " $1;
-        system(ccmd);
-        ccmd="";
-    }
-    else if (NF == 3 ) {
-        dest=$1
-        key=$3
-        split($3, po, "=");
-        if ( po[1] == "none") ccmd="cryptsetup luksOpen " src " " dest;
-        else ccmd="cryptsetup luksOpen -d " key " " src" " dest;
-        system(ccmd);
-        ccmd="";
-    }
-    else {
-    # the option field is not empty parse the options
-        dest=$1
-        key=$3
-        split($4, opts, ",");
-        commonopts="";
-        swapopts="";
-        luksopts="";
-        for(i in opts) {
-            split(opts[i], para, "=");
-            par=para[1];
-            val=para[2];
-            if ( par == "readonly" || par == "read-only") commonopts=commonopts "-r ";
-            else if ( par == "discard" ) commonopts=commonopts "--allow-discards ";
-            else if ( par == "tries" ) commonopts=commonopts "-T " val " ";
-            else if ( par == "swap" ) makeswap="y";
-            else if ( par == "cipher" ) swapopts=swapopts "-c " val " ";
-            else if ( par == "size" ) swapopts=swapopts "-s " val " ";
-            else if ( par == "hash" ) swapopts=swapopts "-h " val " ";
-            else if ( par == "offset" ) swapopts=swapopts "-o " val " ";
-            else if ( par == "skip" ) swapopts=swapopts "-p " val " ";
-            else if ( par == "verify" ) swapopts=swapopts "-y ";
-            #else if ( par == "noauto" )
-            #else if ( par == "nofail" )
-            #else if ( par == "plain" )
-            #else if ( par == "timeout" )
-            #else if ( par == "tmp" )
-            else if ( par == "luks" ) use_luks="y";
-            else if ( par == "keyscript" ) {use_keyscript="y"; keyscript=val;}
-            else if ( par == "keyslot" || par == "key-slot" ) luksopts=luksopts "-S " val " ";
-            else if ( par == "keyfile-size" ) luksopts=luksopts "-l " val " ";
-            else if ( par == "keyfile-offset" ) luksopts=luksopts "-keyfile-offset=" val " ";
-            else if ( par == "header" ) luksopts=luksopts "--header=" val " ";
-            else {
-                print "option: " par " not supported " >"/dev/stderr";
-                makeswap="";
-                use_luks="";
-                use_keyscript="";
-                next;
-            }
-        }
-        if ( makeswap == "y" && use_luks != "y" ) {
-            ccmd="cryptsetup " swapopts commonopts "-d " key " create " dest " " src;
-            ccmd_2="mkswap /dev/mapper/" dest;
-            makeswap="";
-            use_luks=""; 
-            use_keyscript="";
-            system(ccmd);
-            system(ccmd_2);
-            ccmd="";
-            ccmd_2="";
-            next;
-        }
-        if ( use_luks == "y" && makeswap != "y" ){
-            if ( use_keyscript == "y") {
-                ccmd=keyscript " | cryptsetup " luksopts commonopts "luksOpen -d - " src " " dest;
-                use_keyscript="";
-            }
-            else {
-                if ( key == "none" ){
-                    ccmd="cryptsetup " luksopts commonopts "luksOpen " src " " dest;
-                }
-                else {
-                    ccmd="cryptsetup " luksopts commonopts "luksOpen -d " key " " src " " dest;
-                }
-            }
-        }
-        else {
-            print "use swap OR luks as option" >"/dev/stderr";
-            ccmd="";
-        }
-        makeswap="";
-        use_luks="";
-        use_keyscript="";
-        if ( ccmd != ""){
-            system(ccmd);
-            ccmd=""
-        }
-    }
-}

rc/functions.in

@@ -1,538 +0,0 @@
-#!/bin/bash
-# rc functions
-#
-
-# sanitize PATH (will be overridden later when /etc/profile is sourced but is useful for udev)
-export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
-
-# clear the TZ envvar, so daemons always respect /etc/localtime
-# unset TZ
-
-. /etc/profile.d/locale.sh
-
-# width:
-calc_columns () {
-	STAT_COL=80
-	if [[ ! -t 1 ]]; then
-		USECOLOR=""
-	elif [[ -t 0 ]]; then
-		# stty will fail when stdin isn't a terminal
-		STAT_COL=$(stty size)
-		# stty gives "rows cols"; strip the rows number, we just want columns
-		STAT_COL=${STAT_COL##* }
-	elif tput cols &>/dev/null; then
-		# is /usr/share/terminfo already mounted, and TERM recognized?
-		STAT_COL=$(tput cols)
-	fi
-	if (( STAT_COL == 0 )); then
-		# if output was 0 (serial console), set default width to 80
-		STAT_COL=80
-		USECOLOR=""
-	fi
-
-	# we use 13 characters for our own stuff
-	STAT_COL=$(( STAT_COL - 13 ))
-
-	if [[ -t 1 ]]; then
-		SAVE_POSITION="\e[s"
-		RESTORE_POSITION="\e[u"
-		DEL_TEXT="\e[$(( STAT_COL + 4 ))G"
-	else
-		SAVE_POSITION=""
-		RESTORE_POSITION=""
-		DEL_TEXT=""
-	fi
-}
-
-calc_columns
-
-# disable colors on broken terminals
-TERM_COLORS=$(tput colors 2>/dev/null)
-if (( $? != 3 )); then
-	case $TERM_COLORS in
-		*[!0-9]*) USECOLOR="";;
-		[0-7])    USECOLOR="";;
-		'')       USECOLOR="";;
-	esac
-fi
-unset TERM_COLORS
-
-unquote() {
-	local -r quotes=$'[\'"]'
-
-	if [[ ${1:0:1} = $quotes && ${1:(-1)} = "${1:0:1}" ]]; then
-		printf '%s' "${1:1:(-1)}"
-	else
-		printf '%s' "$1"
-	fi
-}
-
-# functions:
-
-deltext() {
-	printf "${DEL_TEXT}"
-}
-
-printhl() {
-	printf "${C_OTHER}${PREFIX_HL} ${C_H1}${1}${C_CLEAR} \n"
-}
-
-printsep() {
-	printf "\n${C_SEPARATOR}   ------------------------------\n"
-}
-
-stat_busy() {
-	printf "${C_OTHER}${PREFIX_REG} ${C_MAIN}${1}${C_CLEAR} "
-	printf "${SAVE_POSITION}"
-	deltext
-	printf "   ${C_OTHER}[${C_BUSY}BUSY${C_OTHER}]${C_CLEAR} "
-}
-
-stat_done() {
-	deltext
-	printf "   ${C_OTHER}[${C_DONE}DONE${C_OTHER}]${C_CLEAR} \n"
-}
-
-stat_fail() {
-	deltext
-	printf "   ${C_OTHER}[${C_FAIL}FAIL${C_OTHER}]${C_CLEAR} \n"
-}
-
-status() {
-	local quiet
-	case $1 in
-		-q)
-			quiet=1
-			;;&
-		-v)
-			# NOOP: supported for backwards compat
-			shift
-			;;
-	esac
-	stat_busy "$1"
-	shift
-	if (( quiet )); then
-		"$@" &>/dev/null
-	else
-		"$@"
-	fi
-	local ret=$?
-	(( ret == 0 )) && stat_done || stat_fail
-	return $ret
-}
-
-#  usage : in_array( $needle, $haystack )
-# return : 0 - found
-#          1 - not found
-in_array() {
-	local needle=$1; shift
-	local item
-	for item; do
-		[[ $item = "${needle}" ]] && return 0
-	done
-	return 1 # Not Found
-}
-
-kill_all() {
-    stat_busy "Sending TERM signal to processes"
-    pkill --inverse -s0,1 -TERM
-    if (( $? == 0 )); then
-        stat_done
-    else
-        stat_fail
-        sleep 1
-        status "Sending KILL signal to processes" pkill --inverse -s0,1 -KILL
-    fi
-}
-
-print_welcome() {
-	# see os-release(5)
-	. /etc/os-release
-
-	echo " "
-	printhl "${PRETTY_NAME}\n"
-	printhl "${C_H2}${HOME_URL}"
-	printsep
-}
-
-load_modules() {
-	local rc=0
-
-	/usr/bin/modules-load
-	(( rc+=$? ))
-
-	return $rc
-}
-
-# Start/trigger udev, load MODULES, and settle udev
-udevd_modprobe() {
-	# $1 = where we are being called from.
-	# This is used to determine which hooks to run.
-	status "Starting udev daemon" udevd --daemon
-
-	run_hook "$1_udevlaunched"
-
-	stat_busy "Triggering udev uevents"
-		udevadm trigger --action=add --type=subsystems
-		udevadm trigger --action=add --type=devices
-	stat_done
-
-	# Load modules from the MODULES array and modules-load.d
-	status "Loading user-specified modules" load_modules
-
-	status "Waiting for udev uevents to be processed" \
-		udevadm settle
-
-	run_hook "$1_udevsettled"
-
-	# in case loading a module changed the display mode
-	calc_columns
-}
-
-activate_vgs() {
-	[[ $USELVM = [yY][eE][sS] && -x $(type -P lvm) && -d /sys/block ]] || return 0
-	stat_busy "Activating LVM2 groups"
-		vgchange --sysinit -a y >/dev/null
-	(( $? == 0 )) && stat_done || stat_fail
-}
-
-do_unlock_legacy() {
-	# $1 = requested name
-	# $2 = source device
-	# $3 = password
-	# $4 = options
-	local open=create a=$1 b=$2 failed=0
-	# Ordering of options is different if you are using LUKS vs. not.
-	# Use ugly swizzling to deal with it.
-	# isLuks only gives an exit code but no output to stdout or stderr.
-	if cryptsetup isLuks "$2" 2>/dev/null; then
-		open=luksOpen
-		a=$2
-		b=$1
-	fi
-	case $3 in
-		SWAP)
-			local _overwriteokay=0
-			if [[ -b $2 && -r $2 ]]; then
-				# This is DANGEROUS! If there is any known file system,
-				# partition table, RAID, or LVM volume on the device,
-				# we don't overwrite it.
-				#
-				# 'blkid' returns 2 if no valid signature has been found.
-				# Only in this case should we allow overwriting the device.
-				#
-				# This sanity check _should_ be sufficient, but it might not.
-				# This may cause data loss if it is not used carefully.
-				blkid -p "$2" &>/dev/null
-				(( $? == 2 )) && _overwriteokay=1
-			fi
-			if (( _overwriteokay == 0 )); then
-				false
-			elif cryptsetup -d /dev/urandom $4 $open "$a" "$b" >/dev/null; then
-				printf "creating swapspace..\n"
-				mkswap -f -L $1 /dev/mapper/$1 >/dev/null
-			fi;;
-		ASK)
-			printf "\nOpening '$1' volume:\n"
-			cryptsetup $4 $open "$a" "$b" < /dev/console;;
-		/dev*)
-			local ckdev=${3%%:*}
-			local cka=${3#*:}
-			local ckb=${cka#*:}
-			local cka=${cka%:*}
-			local ckfile=/dev/ckfile
-			local ckdir=/dev/ckdir
-			case ${cka} in
-				*[!0-9]*)
-					# Use a file on the device
-					# cka is not numeric: cka=filesystem, ckb=path
-					mkdir ${ckdir}
-					mount -r -t ${cka} ${ckdev} ${ckdir}
-					dd if=${ckdir}/${ckb} of=${ckfile} >/dev/null 2>&1
-					umount ${ckdir}
-					rmdir ${ckdir};;
-				*)
-					# Read raw data from the block device
-					# cka is numeric: cka=offset, ckb=length
-					dd if=${ckdev} of=${ckfile} bs=1 skip=${cka} count=${ckb} >/dev/null 2>&1;;
-			esac
-			cryptsetup -d ${ckfile} $4 $open "$a" "$b" >/dev/null
-			dd if=/dev/urandom of=${ckfile} bs=1 count=$(stat -c %s ${ckfile}) conv=notrunc >/dev/null 2>&1
-			rm ${ckfile};;
-		/*)
-			cryptsetup -d "$3" $4 $open "$a" "$b" >/dev/null;;
-		*)
-			echo "$3" | cryptsetup $4 $open "$a" "$b" >/dev/null;;
-	esac
-	return $?
-}
-
-do_unlock() {
-	local name=$1 device=$2 password=$3 options=$4
-
-	printf "${C_MAIN}Unlocking $1${C_CLEAR}\n"
-
-	if [[ ${options:0:2} =~ -. ]]; then
-		do_unlock_legacy "$name" "$device" "$password" "$options"
-		return $?
-	fi
-
-	case $password in
-		ASK|SWAP)
-			do_unlock_legacy "$name" "$device" "$password" "$options"
-			;;
-		*)
-			do_unlock_legacy "$name" "$device" "$password" "$options"
-			;;
-	esac
-	failed=$?
-	if (( $failed )); then
-		printf "${C_FAIL}Unlocking of $1 failed.${C_CLEAR}\n"
-	fi
-	return $?
-}
-
-deactivate_crypt() {
-	if [[ -x /usr/bin/dmsetup ]]; then
-		for v in $(dmsetup ls --target crypt --exec "dmsetup info -c --noheadings -o open,name"); do
-			[[ ${v%%:*} == "0" ]] && cryptsetup close ${v##*:}
-		done
-	fi
-}
-
-set_timezone() {
-	local tz=$1 zonefile=/usr/share/zoneinfo/$1
-
-	[[ $tz ]] || return 1
-
-	if [[ ! -e $zonefile ]]; then
-		printf "error: \`%s' is not a valid time zone\n" "$tz"
-		return 1
-	fi
-
-	if [[ -L /etc/localtime && /etc/localtime -ef $zonefile ]]; then
-		return 0
-	else
-		ln -sf "/usr/share/zoneinfo/$tz" /etc/localtime
-	fi
-}
-
-# Filesystem functions
-# These can be overridden/reused for customizations like shutdown/loop-fsck.
-NETFS="nfs,nfs4,smbfs,cifs,codafs,ncpfs,shfs,fuse,fuseblk,glusterfs,davfs,fuse.glusterfs"
-
-# Check local filesystems
-fsck_all() {
-	if [[ -f /forcefsck ]] || in_array forcefsck $(< /proc/cmdline); then
-		FORCEFSCK="-f"
-	elif [[ -f /fastboot ]] || in_array fastboot $(< /proc/cmdline); then
-		return 0
-	elif [[ -e /run/initramfs/root-fsck ]]; then
-		IGNORE_MOUNTED="-M"
-	fi
-
-	fsck -A -T -C${FSCK_FD} -a -t no${NETFS//,/,no},noopts=_netdev ${IGNORE_MOUNTED} -- ${FORCEFSCK}
-}
-
-# Single-user login and/or automatic reboot after fsck (if needed)
-fsck_reboot() {
-	# $1 = exit code returned by fsck
-	# Ignore conditions 'FS errors corrected' and 'Cancelled by the user'
-	(( ($1 | 33) == 33 )) && return 0
-	if (( $1 & 2 )); then
-		echo
-		echo "********************** REBOOT REQUIRED *********************"
-		echo "*                                                          *"
-		echo "* The system will be rebooted automatically in 15 seconds. *"
-		echo "*                                                          *"
-		echo "************************************************************"
-		echo
-		sleep 15
-	else
-		echo
-		echo "*****************  FILESYSTEM CHECK FAILED  ****************"
-		echo "*                                                          *"
-		echo "*  Please repair manually and reboot. Note that the root   *"
-		echo "*  file system is currently mounted read-only. To remount  *"
-		echo "*  it read-write, type: mount -o remount,rw /              *"
-		echo "*  When you exit the maintenance shell, the system will    *"
-		echo "*  reboot automatically.                                   *"
-		echo "*                                                          *"
-		echo "************************************************************"
-		echo
-		sulogin -p
-	fi
-	echo "Automatic reboot in progress..."
-	umount -a
-	mount -o remount,ro /
-	reboot -f
-	exit 0
-}
-
-mount_all() {
-	mount -a -t "no${NETFS//,/,no}" -O no_netdev
-}
-
-remove_leftover() {
-	status 'Removing leftover files' tmpfiles --create --remove --clean
-}
-
-bootlogd_stop() {
-	[[ -f /run/bootlogd.pid ]] || return 0
-	touch /var/log/boot
-	kill $(< /run/bootlogd.pid)
-	rm -f /run/bootlogd.pid
-}
-
-bootlogd_start(){
-    [[ ! -f /var/log/boot ]] && touch /var/log/boot
-    bootlogd -p /run/bootlogd.pid
-}
-
-console_setup(){
-    TTYS=${TTYS:-6}
-    if [ -n "$FONT" ]; then
-        _index=0
-        while [ ${_index} -le $TTYS ]; do
-            setfont ${FONT_MAP:+-m $FONT_MAP} ${FONT_UNIMAP:+-u $FONT_UNIMAP} \
-                    $FONT -C "/dev/tty${_index}"
-            _index=$((_index + 1))
-        done
-    fi
-    if [ -n "$KEYMAP" ]; then
-        loadkeys -q -u ${KEYMAP}
-    fi
-}
-
-init_random_seed(){
-    cp /var/lib/random-seed /dev/urandom >/dev/null 2>&1 || true
-    ( umask 077; bytes=$(cat /proc/sys/kernel/random/poolsize) || bytes=512; dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=$bytes >/dev/null 2>&1 )
-}
-
-save_random_seed(){
-    ( umask 077; bytes=$(cat /proc/sys/kernel/random/poolsize) || bytes=512; dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=$bytes >/dev/null 2>&1 )
-}
-
-mk_kmod_static_nodes(){
-    [[ -d /run/tmpfiles.d ]] || mkdir /run/tmpfiles.d
-    kmod static-nodes --format=tmpfiles --output=/run/tmpfiles.d/kmod.conf
-}
-
-mk_tmpfiles_dev(){
-    if [ -x /usr/bin/tmpfiles ]; then
-        tmpfiles --prefix=/dev --create --boot
-    fi
-}
-
-mk_tmpfiles_setup(){
-    if [ -x /usr/bin/tmpfiles ]; then
-        tmpfiles --exclude-prefix=/dev --create --remove --boot
-    fi
-}
-
-mk_sysusers(){
-    if [ -x /usr/bin/sysusers ]; then
-        sysusers
-    fi
-}
-
-cleanup_1(){
-    install -m0664 -o root -g utmp /dev/null /run/utmp
-    if [ ! -e /var/log/wtmp ]; then
-        install -m0664 -o root -g utmp /dev/null /var/log/wtmp
-    fi
-    if [ ! -e /var/log/btmp ]; then
-        install -m0600 -o root -g utmp /dev/null /var/log/btmp
-    fi
-    rm -rf /tmp
-    install -dm1777 /tmp /tmp/.X11-unix /tmp/.ICE-unix
-    rm -f /etc/nologin #/forcefsck /forcequotacheck /fastboot
-}
-
-###############################
-# Custom hooks in initscripts #
-###############################
-# Hooks can be used to include custom code in various places in the rc.* scripts
-#
-# Define a hook function in a functions.d file using:
-#  function_name() {
-#    ...
-#  }
-#  add_hook hook_name function_name
-# It is allowed to register several hook functions for the same hook
-# Is is also allowed to register the same hook function for several hooks
-#
-# Currently, the following hooks exist:
-# sysinit_start: at the beginning of rc.sysinit
-# shutdown_start: at the beginning of rc.shutdown
-# sysinit_end: at the end of rc.sysinit
-# sysinit_udevlaunched: after udev has been launched in rc.sysinit
-# sysinit_udevsettled: after uevents have settled in rc.sysinit
-# sysinit_premount: before local filesystems are mounted, but after root is mounted read-write in rc.sysinit
-# sysinit_postmount: after local filesystems are mounted
-# shutdown_prekillall: before all processes are being killed in rc.shutdown
-# shutdown_postkillall: after all processes have been killed in rc.shutdown
-# shutdown_preumount: after last filesystem write, but before filesystems are unmounted
-# shutdown_postumount: after filesystems are unmounted
-# shutdown_poweroff: directly before powering off in rc.shutdown
-#
-# Declare add_hook and run_hook as read-only to prevent overwriting them.
-# Too bad we cannot do the same thing with hook_funcs
-
-if (( RC_FUNCTIONS_HOOK_FUNCS_DEFINED != 1 )); then
-	declare -A hook_funcs
-
-	add_hook() {
-		[[ $1 && $2 ]] || return 1
-		hook_funcs[$1]+=" $2"
-	}
-
-	run_hook() {
-		[[ $1 ]] || return 1
-		local func
-		for func in ${hook_funcs["$1"]}; do
-			"${func}"
-		done
-	}
-
-	declare -fr add_hook run_hook
-	declare -r RC_FUNCTIONS_HOOK_FUNCS_DEFINED=1
-fi
-
-# set colors
-if [[ $USECOLOR != [nN][oO] ]]; then
-	if tput setaf 0 &>/dev/null; then
-		C_CLEAR=$(tput sgr0)                      # clear text
-		C_MAIN=${C_CLEAR}$(tput bold)        # main text
-		C_OTHER=${C_MAIN}$(tput setaf 4)     # prefix & brackets
-		C_SEPARATOR=${C_MAIN}$(tput setaf 0) # separator
-		C_BUSY=${C_CLEAR}$(tput setaf 6)     # busy
-		C_FAIL=${C_MAIN}$(tput setaf 1)      # failed
-		C_DONE=${C_MAIN}                          # completed
-		C_BKGD=${C_MAIN}$(tput setaf 5)      # backgrounded
-		C_H1=${C_MAIN}                            # highlight text 1
-		C_H2=${C_MAIN}$(tput setaf 6)        # highlight text 2
-	else
-		C_CLEAR="\e[m"          # clear text
-		C_MAIN="\e[;1m"         # main text
-		C_OTHER="\e[1;34m"      # prefix & brackets
-		C_SEPARATOR="\e[1;30m"  # separator
-		C_BUSY="\e[;36m"        # busy
-		C_FAIL="\e[1;31m"       # failed
-		C_DONE=${C_MAIN}        # completed
-		C_BKGD="\e[1;35m"       # backgrounded
-		C_H1=${C_MAIN}          # highlight text 1
-		C_H2="\e[1;36m"         # highlight text 2
-	fi
-fi
-
-# prefixes:
-
-PREFIX_REG="::"
-PREFIX_HL=" >"
-
-# Source additional functions at the end to allow overrides
-# for f in @RCDIR@/functions.d/*; do
-# 	[[ -e $f ]] && . "$f"
-# done
-

rc/halt.8

@@ -1,67 +0,0 @@
-.Dd July 29, 2014
-.Dt HALT 8
-.Os Linux
-.Sh NAME
-.Nm halt ,
-.Nm reboot ,
-.Nm poweroff
-.Nd stop the system
-.Sh SYNOPSIS
-.Nm halt
-.Op Fl n
-.Op Fl f
-.Nm reboot
-.Op Fl n
-.Op Fl f
-.Nm poweroff
-.Op Fl n
-.Op Fl f
-.Sh DESCRIPTION
-.Nm halt
-/
-.Nm reboot
-/
-.Nm poweroff
-tells
-.Xr init 8
-to bring down, reboot, or power off the system.
-Without
-.Fl f ,
-it is a shortcut for
-.Nm init 0
-/
-.Nm init 6 .
-.Bl -tag -width indent
-.It Fl n
-Don't sync before reboot or halt.
-Note that the kernel and storage drivers may still sync.
-.It Fl f
-Force halt or reboot, don't call
-.Xr init 8 .
-This is
-.Sy dangerous !
-.El
-.Sh UNSUPPORTED OPTIONS
-This version of
-.Nm
-is based on
-.Xr runit 8 ,
-the following features are
-.Sy not
-supported and silently ignored:
-.Bl -tag -width indent
-.It Fl w
-to just write the wtmp record.
-.It Fl d
-to not write the wtmp record.
-.It Fl h
-to put hard drives in standby mode.
-.It Fl i
-to shut down network interfaces.
-.El
-.Sh SEE ALSO
-.Xr init 8 ,
-.Xr shutdown 8
-.Sh AUTHOR
-.An Leah Neukirchen ,
-.Mt leah@vuxu.org .

rc/halt.c

@@ -1,77 +0,0 @@
-#include <errno.h>
-#include <unistd.h>
-#include <err.h>
-#include <string.h>
-#include <sys/reboot.h>
-
-extern char *__progname;
-
-typedef enum {NOOP, HALT, REBOOT, POWEROFF} action_type;
-
-int main(int argc, char *argv[]) {
-  int do_sync = 1;
-  int do_force = 0;
-  int opt;
-  action_type action = NOOP;
-
-  if (strcmp(__progname, "halt") == 0)
-    action = HALT;
-  else if (strcmp(__progname, "reboot") == 0)
-    action = REBOOT;
-  else if (strcmp(__progname, "poweroff") == 0)
-    action = POWEROFF;
-  else
-    warnx("no default behavior, needs to be called as halt/reboot/poweroff.");
-
-  while ((opt = getopt(argc, argv, "dfhinw")) != -1)
-    switch (opt) {
-    case 'n':
-      do_sync = 0;
-      break;
-    case 'w':
-      action = NOOP;
-      do_sync = 0;
-      break;
-    case 'd':
-    case 'h':
-    case 'i':
-      /* silently ignored.  */
-      break;
-    case 'f':
-      do_force = 1;
-      break;
-    default:
-      errx(1, "Usage: %s [-n] [-f]", __progname);
-    }
-
-  if (do_sync)
-    sync();
-
-  switch (action) {
-  case HALT:
-    if (do_force)
-      reboot(RB_HALT_SYSTEM);
-    else
-      execl("/bin/runit-init", "init", "0", (char*)0);
-    err(1, "halt failed");
-    break;
-  case POWEROFF:
-    if (do_force)
-      reboot(RB_POWER_OFF);
-    else
-      execl("/bin/runit-init", "init", "0", (char*)0);
-    err(1, "poweroff failed");
-    break;
-  case REBOOT:
-    if (do_force)
-      reboot(RB_AUTOBOOT);
-    else
-      execl("/bin/runit-init", "init", "6", (char*)0);
-    err(1, "reboot failed");
-    break;
-  case NOOP:
-    break;
-  }
-
-  return 0;
-}

rc/rc.conf.in

@@ -1,13 +0,0 @@
-# @RCDIR@/rc.conf - system configuration
-
-# Storage
-#
-# USEDMRAID="no"
-# USELVM="no"
-
-# Network
-#
-# interface=
-# address=
-# netmask=
-# gateway=

rc/rc.local.in

@@ -1,4 +0,0 @@
-# Default rc.local; add your custom commands here.
-#
-# This is run by runit in stage 2 before the services are executed
-# (see /etc/runit/2).

rc/rc.shutdown.in

@@ -1,4 +0,0 @@
-# Default rc.shutdown; add your custom commands here.
-#
-# This is run by runit in stage 3 after the services are stopped
-# (see /etc/runit/3).

rc/shutdown.8

@@ -1,90 +0,0 @@
-.Dd July 29, 2014
-.Dt SHUTDOWN 8
-.Os Linux
-.Sh NAME
-.Nm shutdown
-.Nd bring down the system
-.Sh SYNOPSIS
-.Nm shutdown
-.Op Fl rhP
-.Op Fl fF
-.Op Cm now | Cm + Ns Ar mins
-.Op Ar message ...
-.Sh DESCRIPTION
-.Nm
-brings the system down in a secure way.
-All logged-in users
-are notified that the system is going down, and
-.Xr login 1
-is blocked.
-.Pp
-By default,
-.Nm
-puts the system into single user mode.
-Rebooting and halting the system can be done using the following options:
-.Bl -tag -width indent
-.It Fl c
-Cancel an ongoing shutdown.
-.It Fl f
-Enable fast booting; skip
-.Xr fsck 8
-on next boot.
-.It Fl F
-Force run of
-.Xr fsck 8
-on next boot.
-.It Fl h
-Halt the system.
-.It Fl k
-Don't really shutdown; only send the warning messages to everybody.
-.It Fl P
-Poweroff the system.
-.It Fl r
-Reboot the system.
-.It Cm now
-Shutdown without further waiting.
-.It Cm + Ns Ar mins
-Wait
-.Ar mins
-minutes before shutting down.
-.It Ar message
-Message displayed to all users, defaults to "system is going down".
-.El
-.Sh UNSUPPORTED OPTIONS
-This version of
-.Nm
-is based on
-.Xr runit 8 ,
-the following features are
-.Sy not
-supported:
-.Bl -tag -width indent
-.It Fl t Ar secs
-to wait
-.Ar secs
-seconds between SIGKILL and SIGTERM on shutdown is silently ignored.
-.It Fl a
-Use
-.Pa /etc/shutdown.allow .
-.It Fl H
-Drop into boot monitor.
-.It Fl n
-Don't call
-.Xr init 8 .
-.It Ar hh Ns : Ns Ar mm
-Absolute time specification is not implemented.
-.El
-.Sh EXAMPLES
-Turn off the system:
-.Dl # shutdown -h now
-.Sh SEE ALSO
-.Xr fsck 8 ,
-.Xr halt 8 ,
-.Xr init 8 ,
-.Xr poweroff 8 ,
-.Xr reboot 8 ,
-.Xr runit 8 ,
-.Xr runsvchdir 8
-.Sh AUTHOR
-.An Leah Neukirchen ,
-.Mt leah@vuxu.org .

rc/shutdown.d/01-random-seed.sh

@@ -1 +0,0 @@
-status 'Saving random seed' save_random_seed

rc/shutdown.d/02-timezone.sh

@@ -1 +0,0 @@
-[[ $TIMEZONE ]] && status "Configuring time zone" set_timezone "$TIMEZONE"

rc/shutdown.d/03-wtmp.sh

@@ -1,2 +0,0 @@
-# Write to wtmp file before unmounting
-halt -w

rc/shutdown.d/04-lvm2-monitoring.sh

@@ -1,3 +0,0 @@
-# stop monitoring of LVM2 groups before unmounting filesystems
-[[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) ]] &&
-	status "Deactivating monitoring of LVM2 groups" vgchange --monitor n

rc/shutdown.d/05-udev.sh

@@ -1,2 +0,0 @@
-# any future uevents can and should be ignored
-status "Shutting down udev" udevadm control --exit

rc/shutdown.d/06-kill-all.sh

@@ -1,3 +0,0 @@
-run_hook shutdown_prekillall
-kill_all
-run_hook shutdown_postkillall

rc/shutdown.d/08-swap.sh

@@ -1,3 +0,0 @@
-# almost everything is dead now, so the swap should hopefully be relatively
-# empty, and quick to switch off
-status "Deactivating swap" swapoff -a

rc/shutdown.d/09-umount-api-fs.sh

@@ -1,3 +0,0 @@
-run_hook shutdown_preumount
-status "Unmounting non-API filesystems" umount -r -a -t nosysfs,noproc,nodevtmpfs,notmpfs
-run_hook shutdown_postumount

rc/shutdown.d/10-cryptsetup.sh

@@ -1,7 +0,0 @@
-# Kill non-root encrypted partition mappings
-if [[ -f /etc/crypttab ]] && type -p cryptsetup >/dev/null; then
-	# Maybe someone has LVM on an encrypted block device
-	# executing an extra vgchange is errorless
-	[[ $USELVM = [Yy][Ee][Ss] ]] && vgchange --sysinit -a n &>/dev/null
-	deactivate_crypt
-fi

rc/shutdown.d/11-lvm2.sh

@@ -1,2 +0,0 @@
-[[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) ]] &&
-	status "Deactivating LVM2 groups" vgchange --sysinit -a n &>/dev/null

rc/shutdown.d/12-remount-rootfs-ro.sh

@@ -1,2 +0,0 @@
-status "Remounting root filesystem read-only" \
-    mount -o remount,ro /

rc/shutdown.in

@@ -1,73 +0,0 @@
-#!/bin/sh
-# shutdown - shutdown(8) lookalike for runit
-
-single() {
-  runsvchdir single
-}
-
-abort() {
-  printf '%s\n' "$1" >&2
-  exit 1
-}
-
-usage() {
-  abort "Usage: ${0##*/} [-fF] [-kchPr] time [warning message]"
-}
-
-action=single
-
-while getopts akrhPHfFnct: opt; do
-  case "$opt" in
-    a|n|H) abort "'-$opt' is not implemented";;
-    t) ;;
-    f) touch /fastboot;;
-    F) touch /forcefsck;;
-    k) action=true;;
-    c) action=cancel;;
-    h|P) action=halt;;
-    r) action=reboot;;
-    [?]) usage;;
-  esac
-done
-shift $((OPTIND - 1))
-
-[ $# -eq 0 ] && usage
-
-time=$1; shift
-message="${*:-system is going down}"
-
-if [ "$action" = "cancel" ]; then
-  kill "$(cat @RUNDIR@/shutdown.pid)"
-  if [ -e /etc/nologin ] && ! [ -s /etc/nologin ]; then
-    rm /etc/nologin
-  fi
-  echo "${*:-shutdown cancelled}" | wall
-  exit
-fi
-
-touch @RUNDIR@/shutdown.pid 2>/dev/null || abort "Not enough permissions to execute ${0#*/}"
-echo $$ >@RUNDIR@/shutdown.pid
-
-case "$time" in
-  now) time=0;;
-  +*) time=${time#+};;
-  *:*) abort "absolute time is not implemented";;
-  *) abort "invalid time";;
-esac
-
-for break in 5 0; do
-  [ "$time" -gt "$break" ] || continue
-  [ "$break" = 0 ] && touch /etc/nologin
-
-  printf '%s in %s minutes\n' "$message" "$time" | wall
-  printf 'shutdown: sleeping for %s minutes... ' "$(( time - break ))"
-  sleep $(( (time - break) * 60 ))
-  time="$break"
-  printf '\n'
-
-  [ "$break" = 0 ] && rm /etc/nologin
-done
-
-printf '%s NOW\n' "$message" | wall
-
-$action

rc/sysinit.d/01-mount-api-fs.sh

@@ -1,16 +0,0 @@
-# mount the API filesystems
-# /proc, /sys, /run, /dev, /run/lock, /dev/pts, /dev/shm
-mountpoint -q /proc    || mount -t proc proc /proc -o nosuid,noexec,nodev
-mountpoint -q /sys     || mount -t sysfs sys /sys -o nosuid,noexec,nodev
-mountpoint -q /run     || mount -t tmpfs run /run -o mode=0755,nosuid,nodev
-mountpoint -q /dev     || mount -t devtmpfs dev /dev -o mode=0755,nosuid
-mkdir -p /dev/{pts,shm}
-mountpoint -q /dev/pts || mount -t devpts devpts /dev/pts -o mode=0620,gid=5,nosuid,noexec
-mountpoint -q /dev/shm || mount -t tmpfs shm /dev/shm -o mode=1777,nosuid,nodev
-mountpoint -q /sys/kernel/security || mount -n -t securityfs securityfs /sys/kernel/security
-mountpoint -q /sys/firmware/efi/efivars || mount -n -t efivarfs -o ro efivarfs /sys/firmware/efi/efivars
-mountpoint -q /sys/fs/cgroup || mount -o mode=0755 -t tmpfs cgroup /sys/fs/cgroup
-mountpoint -q /sys/fs/cgroup/openrc || mkdir -p /sys/fs/cgroup/openrc && mount -t cgroup -o none,name=openrc cgroup /sys/fs/cgroup/openrc
-awk '$4 == 1 { system("mountpoint -q /sys/fs/cgroup/" $1 " || { mkdir -p /sys/fs/cgroup/" $1 " && mount -t cgroup -o " $1 " cgroup /sys/fs/cgroup/" $1 " ;}" ) }' /proc/cgroups
-
-findmnt / --options ro &>/dev/null || status "Mounting root read-only" mount -o remount,ro /

rc/sysinit.d/02-hostname.sh

@@ -1,10 +0,0 @@
-unset HOSTNAME
-
-if [[ -s /etc/hostname ]]; then
-	HOSTNAME=$(< /etc/hostname)
-fi
-
-if [[ $HOSTNAME ]]; then
-	stat_busy "Setting hostname: $HOSTNAME"
-	echo "$HOSTNAME" >| /proc/sys/kernel/hostname && stat_done || stat_fail
-fi

rc/sysinit.d/03-hwclock.sh

@@ -1,34 +0,0 @@
-HWCLOCK_PARAMS="--systz"
-
-if [[ $HARDWARECLOCK ]]; then
-
-	[[ -f /etc/adjtime ]] && { read ; read ; read ADJTIME; } < /etc/adjtime
-
-	if [[ $ADJTIME == 'LOCAL' ]]; then
-		if	[[ $HARDWARECLOCK == 'UTC' ]]; then
-			printf "${C_FAIL}@RCDIR@/rc.conf says the RTC is in UTC, but /etc/adjtime says it is in localtime.\n${C_OTHER}."
-		fi
-	else
-		if [[ $HARDWARECLOCK == 'LOCALTIME' ]]; then
-			printf "${C_FAIL}@RCDIR@/rc.conf says the RTC is in localtime, but hwclock (/etc/adjtime) thinks it is in UTC.\n${C_OTHER}."
-		fi
-	fi
-
-	case $HARDWARECLOCK in
-		UTC) HWCLOCK_PARAMS+=" --utc --noadjfile";;
-		localtime) HWCLOCK_PARAMS+=" --localtime --noadjfile";;
-		*) HWCLOCK_PARAMS="";;
-	esac
-fi
-
-if [[ $HWCLOCK_PARAMS ]]; then
-	stat_busy "Adjusting system time and setting kernel time zone"
-
-	# Adjust the system time for time zone offset if rtc is not in UTC, as
-	# filesystem checks can depend on system time. This also sets the kernel
-	# time zone, used by e.g. vfat.
-
-	hwclock $HWCLOCK_PARAMS && stat_done || stat_fail
-
-	unset TZ
-fi

rc/sysinit.d/04-kmod-static-nodes.sh

@@ -1 +0,0 @@
-status "Creating list of required static device nodes" mk_kmod_static_nodes

rc/sysinit.d/05-tmpfiles-dev.sh

@@ -1 +0,0 @@
-status "Setting up tmpfiles.d entries for /dev" mk_tmpfiles_dev

rc/sysinit.d/06-udev-modprobe.sh

@@ -1,2 +0,0 @@
-# Start/trigger udev, load MODULES, and settle udev
-udevd_modprobe sysinit

rc/sysinit.d/07-console-setup.sh

@@ -1,2 +0,0 @@
-# this must be done after udev has loaded the KMS modules
-status 'Configuring virtual consoles' console_setup

rc/sysinit.d/08-net-lo.sh

@@ -1,2 +0,0 @@
-# bring up the loopback interface
-[[ -d /sys/class/net/lo ]] && status "Bringing up loopback interface" ip link set up dev lo

rc/sysinit.d/09-dmraid.sh

@@ -1,3 +0,0 @@
-# FakeRAID devices detection
-[[ $USEDMRAID = [Yy][Ee][Ss] && -x $(type -P dmraid) ]] &&
-	status "Activating FakeRAID arrays" dmraid -i -ay

rc/sysinit.d/10-lvm2.sh

@@ -1,2 +0,0 @@
-# Activate LVM2 groups, if any
-activate_vgs

rc/sysinit.d/11-cryptsetup.sh

@@ -1,6 +0,0 @@
-# Set up non-root encrypted partition mappings
-if [[ -f /etc/crypttab ]] && type -p cryptsetup >/dev/null; then
-	status "Activating encrypted devices" awk -f /etc/rc/crypt.awk /etc/crypttab
-	# Maybe someone has LVM on an encrypted block device
-	activate_vgs
-fi

rc/sysinit.d/12-fsck.sh

@@ -1,13 +0,0 @@
-run_hook sysinit_prefsck
-if [[ -x $(type -P fsck) ]]; then
-	stat_busy "Checking filesystems"
-		fsck_all >|"${FSCK_OUT:-/dev/stdout}" 2>|"${FSCK_ERR:-/dev/stdout}"
-	declare -r fsckret=$?
-	(( fsckret <= 1 )) && stat_done || stat_fail
-else
-	declare -r fsckret=0
-fi
-# Single-user login and/or automatic reboot if needed
-run_hook sysinit_postfsck
-
-fsck_reboot $fsckret

rc/sysinit.d/13-remount-api-fs.sh

@@ -1,2 +0,0 @@
-status "Remounting root and API filesystems" \
-	mount -o remount,rw /

rc/sysinit.d/14-mount-local-fs.sh

@@ -1,4 +0,0 @@
-run_hook sysinit_premount
-status "Mounting local filesystems" \
-	mount_all
-run_hook sysinit_postmount

rc/sysinit.d/15-lvm2-monitoring.sh

@@ -1,4 +0,0 @@
-# Enable monitoring of LVM2 groups, now that the filesystems are mounted rw
-[[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) && -d /sys/block ]] &&
-	status "Activating monitoring of LVM2 groups" \
-		vgchange --monitor y >/dev/null

rc/sysinit.d/16-swap.sh

@@ -1 +0,0 @@
-status "Activating swap" swapon -a

rc/sysinit.d/17-timezone.sh

@@ -1 +0,0 @@
-[[ $TIMEZONE ]] && status "Configuring time zone" set_timezone "$TIMEZONE"

rc/sysinit.d/18-random-seed.sh

@@ -1 +0,0 @@
-status 'Initializing random seed' init_random_seed

rc/sysinit.d/19-tmpfiles-setup.sh

@@ -1 +0,0 @@
-status "Setting up tmpfiles.d entries" mk_tmpfiles_setup

rc/sysinit.d/20-sysusers.sh

@@ -1 +0,0 @@
-status "Setting up sysusers.d entries" mk_sysusers

rc/sysinit.d/21-dmesg-log.sh

@@ -1,8 +0,0 @@
-stat_busy "Saving dmesg log"
-	if [[ -e /proc/sys/kernel/dmesg_restrict ]] &&
-		(( $(< /proc/sys/kernel/dmesg_restrict) == 1 )); then
-		install -Tm 0600 <( dmesg ) /var/log/dmesg.log
-	else
-		install -Tm 0644 <( dmesg ) /var/log/dmesg.log
-	fi
-(( $? == 0 )) && stat_done || stat_fail

runsvdir/current

@@ -1 +0,0 @@
-default

runsvdir/default/agetty-tty1

@@ -1 +0,0 @@
-/etc/runit/sv/agetty-tty1

runsvdir/default/agetty-tty2

@@ -1 +0,0 @@
-/etc/runit/sv/agetty-tty2

runsvdir/default/agetty-tty3

@@ -1 +0,0 @@
-/etc/runit/sv/agetty-tty3

runsvdir/default/agetty-tty4

@@ -1 +0,0 @@
-/etc/runit/sv/agetty-tty4

runsvdir/default/agetty-tty5

@@ -1 +0,0 @@
-/etc/runit/sv/agetty-tty5

runsvdir/default/agetty-tty6

@@ -1 +0,0 @@
-/etc/runit/sv/agetty-tty6

runsvdir/single/sulogin

@@ -1 +0,0 @@
-/etc/runit/sv/sulogin

script/1.in

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+PATH=/usr/bin:/usr/sbin
+
+. @RCLIBDIR@/functions
+
+run_sysinit
+
+install -m000 /dev/null @RUNDIR@/stopit
+install -m000 /dev/null @RUNDIR@/reboot
+
+status "Initialization complete"

script/2.in

@@ -2,20 +2,23 @@
 
 PATH=/usr/bin:/usr/sbin
 
-. @RCDIR@/functions
-
-status "Running stage 2"
-
 runlevel=default
 for arg in $(cat /proc/cmdline); do
     if [ -d @RUNITDIR@/runsvdir/"$arg" ]; then
-        status "Runlevel detected: '$arg' (via kernel cmdline)"
+        echo "Runlevel detected: '$arg' (via kernel cmdline)"
         runlevel="$arg"
     fi
 done
 
+if [ -x @RCDIR@/rc.local ] && grep -qv '^#' @RCDIR@/rc.local; then
+    @RCDIR@/rc.local
+    echo "==> @RCDIR@/rc.local has been deprecated. Please move the contents"
+    echo "    of the file to @SYSCONFDIR@/rc.local, since the next version of"
+    echo "    runit-artix won't read @RCDIR@/rc.local anymore."
+fi
+[ -x @SYSCONFDIR@/rc.local ] && @SYSCONFDIR@/rc.local
 runsvchdir "${runlevel}"
-# mkdir -p @RUNDIR@/runsvdir
+
 ln -s @RUNSVDIR@/current @SERVICEDIR@
 
 exec env - PATH=$PATH \

script/3.in

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+PATH=/usr/bin:/usr/sbin
+
+. @RCLIBDIR@/functions
+
+stat_busy "Stop services ..."
+sv force-stop @RUNDIR@/service/*
+stat_done
+stat_busy "Exit services ..."
+sv exit @RUNDIR@/service/*
+stat_done
+
+if [ -x @RCDIR@/rc.shutdown ] && grep -qv '^#' @RCDIR@/rc.shutdown; then
+    @RCDIR@/rc.shutdown
+    echo "==> @RCDIR@/rc.shutdown has been depreacted. Please move the contents"
+    echo "    of the file to @SYSCONFDIR@/rc.shutdown since the next version of"
+    echo "    runit-artix won't read @RCDIR@/rc.shutdown anymore."
+fi
+[ -x @SYSCONFDIR@/rc.local ] && @SYSCONFDIR@/rc.local
+
+run_shutdown
+
+if [ -e @RUNDIR@/reboot ]; then
+    [[ -x $(type -P kexec) ]] && kexec -e &>/dev/null
+fi
+
+status "Stage 3 completed."

script/ctrlaltdel.in

@@ -3,8 +3,11 @@
 PATH=/usr/bin:/usr/sbin
 MSG="System is going down..."
 
+# We check for this file after receiving a SIGCONT to move to stage3
+chmod 100 @RUNDIR@/stopit
+
 # We check for this file in stage3 to halt or reboot
-touch @RUNDIR@/reboot
+chmod 100 @RUNDIR@/reboot
 
 # Proceed with shutdown process
 echo "$MSG" | wall

script/rc.local.in

@@ -0,0 +1,4 @@
+# @SYSCONFDIR@/rc.local -- rc.local for Artix Linux
+#
+# Enter your custom commands here. It will be executed on stage 2
+# before running services.

script/rc.shutdown.in

@@ -0,0 +1,4 @@
+# @SYSCONFDIR@/rc.shutdown -- rc.shutdown for Artix Linux
+#
+# Enter your custom commands here. It will be executed on stage 3
+# after stopping services.

shutdown.8

@@ -1,90 +0,0 @@
-.Dd July 29, 2014
-.Dt SHUTDOWN 8
-.Os Linux
-.Sh NAME
-.Nm shutdown
-.Nd bring down the system
-.Sh SYNOPSIS
-.Nm shutdown
-.Op Fl rhP
-.Op Fl fF
-.Op Cm now | Cm + Ns Ar mins
-.Op Ar message ...
-.Sh DESCRIPTION
-.Nm
-brings the system down in a secure way.
-All logged-in users
-are notified that the system is going down, and
-.Xr login 1
-is blocked.
-.Pp
-By default,
-.Nm
-puts the system into single user mode.
-Rebooting and halting the system can be done using the following options:
-.Bl -tag -width indent
-.It Fl c
-Cancel an ongoing shutdown.
-.It Fl f
-Enable fast booting; skip
-.Xr fsck 8
-on next boot.
-.It Fl F
-Force run of
-.Xr fsck 8
-on next boot.
-.It Fl h
-Halt the system.
-.It Fl k
-Don't really shutdown; only send the warning messages to everybody.
-.It Fl P
-Poweroff the system.
-.It Fl r
-Reboot the system.
-.It Cm now
-Shutdown without further waiting.
-.It Cm + Ns Ar mins
-Wait
-.Ar mins
-minutes before shutting down.
-.It Ar message
-Message displayed to all users, defaults to "system is going down".
-.El
-.Sh UNSUPPORTED OPTIONS
-This version of
-.Nm
-is based on
-.Xr runit 8 ,
-the following features are
-.Sy not
-supported:
-.Bl -tag -width indent
-.It Fl t Ar secs
-to wait
-.Ar secs
-seconds between SIGKILL and SIGTERM on shutdown is silently ignored.
-.It Fl a
-Use
-.Pa /etc/shutdown.allow .
-.It Fl H
-Drop into boot monitor.
-.It Fl n
-Don't call
-.Xr init 8 .
-.It Ar hh Ns : Ns Ar mm
-Absolute time specification is not implemented.
-.El
-.Sh EXAMPLES
-Turn off the system:
-.Dl # shutdown -h now
-.Sh SEE ALSO
-.Xr fsck 8 ,
-.Xr halt 8 ,
-.Xr init 8 ,
-.Xr poweroff 8 ,
-.Xr reboot 8 ,
-.Xr runit 8 ,
-.Xr runsvchdir 8
-.Sh AUTHOR
-.An Leah Neukirchen ,
-.Mt leah@vuxu.org .

shutdown.in

@@ -1,73 +0,0 @@
-#!/bin/sh
-# shutdown - shutdown(8) lookalike for runit
-
-single() {
-  runsvchdir single
-}
-
-abort() {
-  printf '%s\n' "$1" >&2
-  exit 1
-}
-
-usage() {
-  abort "Usage: ${0##*/} [-fF] [-kchPr] time [warning message]"
-}
-
-action=single
-
-while getopts akrhPHfFnct: opt; do
-  case "$opt" in
-    a|n|H) abort "'-$opt' is not implemented";;
-    t) ;;
-    f) touch /fastboot;;
-    F) touch /forcefsck;;
-    k) action=true;;
-    c) action=cancel;;
-    h|P) action=halt;;
-    r) action=reboot;;
-    [?]) usage;;
-  esac
-done
-shift $((OPTIND - 1))
-
-[ $# -eq 0 ] && usage
-
-time=$1; shift
-message="${*:-system is going down}"
-
-if [ "$action" = "cancel" ]; then
-  kill "$(cat @RUNDIR@/shutdown.pid)"
-  if [ -e /etc/nologin ] && ! [ -s /etc/nologin ]; then
-    rm /etc/nologin
-  fi
-  echo "${*:-shutdown cancelled}" | wall
-  exit
-fi
-
-touch @RUNDIR@/shutdown.pid 2>/dev/null || abort "Not enough permissions to execute ${0#*/}"
-echo $$ >@RUNDIR@/shutdown.pid
-
-case "$time" in
-  now) time=0;;
-  +*) time=${time#+};;
-  *:*) abort "absolute time is not implemented";;
-  *) abort "invalid time";;
-esac
-
-for break in 5 0; do
-  [ "$time" -gt "$break" ] || continue
-  [ "$break" = 0 ] && touch /etc/nologin
-
-  printf '%s in %s minutes\n' "$message" "$time" | wall
-  printf 'shutdown: sleeping for %s minutes... ' "$(( time - break ))"
-  sleep $(( (time - break) * 60 ))
-  time="$break"
-  printf '\n'
-
-  [ "$break" = 0 ] && rm /etc/nologin
-done
-
-printf '%s NOW\n' "$message" | wall
-
-$action

sv/agetty-console/supervise

@@ -1 +0,0 @@
-/run/runit/supervise.agetty-console

sv/agetty-tty1/supervise

@@ -1 +0,0 @@
-/run/runit/supervise.agetty-tty1

sv/agetty-tty2/supervise

@@ -1 +0,0 @@
-/run/runit/supervise.agetty-tty2

sv/agetty-tty3/supervise

@@ -1 +0,0 @@
-/run/runit/supervise.agetty-tty3

sv/agetty-tty4/supervise

@@ -1 +0,0 @@
-/run/runit/supervise.agetty-tty4

sv/agetty-tty5/supervise

@@ -1 +0,0 @@
-/run/runit/supervise.agetty-tty5

sv/agetty-tty6/supervise

@@ -1 +0,0 @@
-/run/runit/supervise.agetty-tty6

sv/agetty-ttyAMA0/supervise

@@ -1 +0,0 @@
-/run/runit/supervise.agetty-ttyAMA0

sv/agetty-ttyS0/supervise

@@ -1 +0,0 @@
-/run/runit/supervise.agetty-ttyS0

sv/agetty-ttyUSB0/supervise

@@ -1 +0,0 @@
-/run/runit/supervise.agetty-ttyUSB0

sv/sulogin/supervise

@@ -1 +0,0 @@
-/run/runit/supervise.sulogin

update-service.in

@@ -1,88 +0,0 @@
-#!/bin/sh
-set -e
-
-servicedir=$SVDIR
-test -n "$servicedir" || servicedir=@SERVICEDIR@
-
-err() { >&2 printf '%s\n\n' "$*"; exit 1; }
-fatal() { err "${0##*/}: fatal: $*"; }
-warn() { err "${0##*/}: warning: $*"; }
-usage() {
-  err "Usage: ${0##*/} --add|--remove <service-directory> [<service-name>]
-       ${0##*/} --list|--check [<service-name>]"
-}
-
-opt=$1
-svdir=${2%/}
-sv=$3
-test -z "${opt##-*}" || usage
-
-case "$opt" in
-  -c|--check) exec >/dev/null; exec 2>/dev/null; opt=-l;;
-esac
-case "$opt" in
-  -l|--list)
-    test -n "$svdir" || exec ls -1 "$servicedir"
-    test -h "$servicedir"/"$svdir" || err "Service $svdir not registered."
-    printf '%s -> %s\n' "$svdir" "$(readlink "$servicedir"/"$svdir")"
-    exit 0
-  ;;
-esac
-
-test -n "$svdir" || usage
-test -d "$svdir" ||
-  fatal "$svdir does not exist, or is not a directory."
-test -z "${svdir%%/*}" ||
-  fatal "The <service-directory> must start with a slash."
-test -n "$sv" || sv=${svdir##*/}
-test -n "${sv##.*}" ||
-  fatal "The <service-name> must not start with a dot."
-test "$sv" = "${sv#*/}" ||
-  fatal "The <service-name> must not contain a slash."
-
-case "$opt" in
-  -a|--add)
-    test "$(id -u)" = 0 || fatal "${0##*/} -a must be run by root."
-    if test -e "$servicedir"/"$sv"; then
-      test -h "$servicedir"/"$sv" ||
-        fatal "$servicedir/$sv exists, but is not a symbolic link."
-      test "$(readlink "$servicedir"/"$sv")" = "$svdir" ||
-        test "$(readlink "$servicedir"/"$sv")" = "$svdir"/ ||
-          fatal "$servicedir/$sv exists, but doesn't point to $svdir."
-      printf '%s\n' "Service $sv already added."
-      exit 0
-    fi
-    ! sv stat "$svdir" >/dev/null 2>&1 ||
-      fatal "$svdir is currently controlled by a runsv(8) process."
-    if test "${svdir#/etc/}" != "$svdir"; then
-      if test ! -h "$svdir"/supervise; then
-        rm -rf "$svdir"/supervise
-        ln -s /var/lib/supervise/"$sv" "$svdir"/supervise
-      fi
-      if test -d "$svdir"/log && test ! -h "$svdir"/log/supervise; then
-        rm -rf "$svdir"/log/supervise
-        ln -s /var/lib/supervise/"$sv".log "$svdir"/log/supervise
-      fi
-    fi
-    ln -s "$svdir" "$servicedir"/"$sv"
-    printf '%s\n' "Service $sv added."
-    exit 0
-  ;;
-  -r|--remove)
-    test "$(id -u)" = 0 || fatal "${0##*/} -r must be run by root."
-    test -e "$servicedir"/"$sv" ||
-      warn "$servicedir/$sv does not exist."
-    test -h "$servicedir"/"$sv" ||
-      fatal "$servicedir/$sv is not a symbolic link."
-    test "$svdir" = "$(readlink "$servicedir"/"$sv")" ||
-      test "$svdir"/ = "$(readlink "$servicedir"/"$sv")" ||
-        fatal "$servicedir/$sv does not point to $svdir."
-    rm -f "$servicedir"/"$sv"
-    printf '%s %s\n' \
-      "Service $sv removed," \
-      "the service daemon received the TERM and CONT signals."
-    exit 0
-  ;;
-  *) usage
-  ;;
-esac