rc: build new instance from ground up, following void's scheme closely

This is meant to be an experiment (testing on a f2fs system to see
what's wrong with the old Arch initscript). However, this may be merged
into our mainline. If that *does* happen, I'll merge some of the old
scirpts (e.g. tmpfiles-setup, lvm) back, but some sv.d scripts (like netfs)
will need to be removed permanently.

Makefile

@@ -16,34 +16,23 @@ RCBIN = \
 	script/modules-load
 
 RCSVD = \
-	sv.d/root \
     sv.d/binfmt \
-	sv.d/bootlogd \
+    sv.d/cgroups \
     sv.d/cleanup \
     sv.d/console-setup \
-	sv.d/dmesg \
+    sv.d/fsck \
     sv.d/hostname \
     sv.d/hwclock \
     sv.d/kmod-static-nodes \
-	sv.d/misc \
-	sv.d/mount-all \
+    sv.d/modules \
+    sv.d/mount-fs \
     sv.d/net-lo \
-	sv.d/netfs \
+    sv.d/pseudofs \
     sv.d/random-seed \
-	sv.d/remount-root \
     sv.d/swap \
     sv.d/sysctl \
-	sv.d/sysusers \
     sv.d/tmpfiles-dev \
-	sv.d/tmpfiles-setup \
-	sv.d/udev \
-	sv.d/udev-trigger \
-	sv.d/udev-settle \
-	sv.d/modules \
-	sv.d/sysfs \
-	sv.d/devfs \
-	sv.d/procfs \
-	sv.d/cgroups
+    sv.d/udev
 
 # SYSINIT = \
 # 	01-sysfs \
@@ -131,42 +120,32 @@ install-rc:
 
 	install -d $(DESTDIR)$(RCDIR)/sysinit
 
-	$(LN) $(RCSVDIR)/sysfs $(DESTDIR)$(RCDIR)/sysinit/01-sysfs
-	$(LN) $(RCSVDIR)/procfs $(DESTDIR)$(RCDIR)/sysinit/02-procfs
-	$(LN) $(RCSVDIR)/devfs $(DESTDIR)$(RCDIR)/sysinit/03-devfs
-	$(LN) $(RCSVDIR)/cgroups $(DESTDIR)$(RCDIR)/sysinit/04-cgroups
-	$(LN) $(RCSVDIR)/root $(DESTDIR)$(RCDIR)/sysinit/05-root
-	$(LN) $(RCSVDIR)/hostname $(DESTDIR)$(RCDIR)/sysinit/10-hostname
+	$(LN) $(RCSVDIR)/pseudofs $(DESTDIR)$(RCDIR)/sysinit/01-pseudofs
+	$(LN) $(RCSVDIR)/cgroups $(DESTDIR)$(RCDIR)/sysinit/02-cgroups
+	$(LN) $(RCSVDIR)/kmod-static-nodes $(DESTDIR)$(RCDIR)/sysinit/03-kmod-static-nodes
+	$(LN) $(RCSVDIR)/modules $(DESTDIR)$(RCDIR)/sysinit/04-modules
+	$(LN) $(RCSVDIR)/tmpfiles-dev $(DESTDIR)$(RCDIR)/sysinit/05-tmpfiles-dev
+	$(LN) $(RCSVDIR)/udev $(DESTDIR)$(RCDIR)/sysinit/06-udev
+	$(LN) $(RCSVDIR)/console-setup $(DESTDIR)$(RCDIR)/sysinit/10-console-setup
 	$(LN) $(RCSVDIR)/hwclock $(DESTDIR)$(RCDIR)/sysinit/15-hwclock
-	$(LN) $(RCSVDIR)/kmod-static-nodes $(DESTDIR)$(RCDIR)/sysinit/20-kmod-static-nodes
-	$(LN) $(RCSVDIR)/tmpfiles-dev $(DESTDIR)$(RCDIR)/sysinit/25-tmpfiles-dev
-	$(LN) $(RCSVDIR)/udev $(DESTDIR)$(RCDIR)/sysinit/30-udev
-	$(LN) $(RCSVDIR)/udev-trigger $(DESTDIR)$(RCDIR)/sysinit/31-udev-trigger
-	$(LN) $(RCSVDIR)/modules $(DESTDIR)$(RCDIR)/sysinit/32-modules
-	$(LN) $(RCSVDIR)/udev-settle $(DESTDIR)$(RCDIR)/sysinit/33-udev-settle
-	$(LN) $(RCSVDIR)/console-setup $(DESTDIR)$(RCDIR)/sysinit/40-console-setup
-	$(LN) $(RCSVDIR)/net-lo $(DESTDIR)$(RCDIR)/sysinit/45-net-lo
-	$(LN) $(RCSVDIR)/misc $(DESTDIR)$(RCDIR)/sysinit/50-misc
-	$(LN) $(RCSVDIR)/remount-root $(DESTDIR)$(RCDIR)/sysinit/55-remount-root
-	$(LN) $(RCSVDIR)/mount-all $(DESTDIR)$(RCDIR)/sysinit/60-mount-all
-	$(LN) $(RCSVDIR)/swap $(DESTDIR)$(RCDIR)/sysinit/65-swap
-	$(LN) $(RCSVDIR)/random-seed $(DESTDIR)$(RCDIR)/sysinit/70-random-seed
-	$(LN) $(RCSVDIR)/tmpfiles-setup $(DESTDIR)$(RCDIR)/sysinit/75-tmpfiles-setup
-	$(LN) $(RCSVDIR)/sysusers $(DESTDIR)$(RCDIR)/sysinit/80-sysusers
-	$(LN) $(RCSVDIR)/dmesg $(DESTDIR)$(RCDIR)/sysinit/85-dmesg
-	$(LN) $(RCSVDIR)/sysctl $(DESTDIR)$(RCDIR)/sysinit/90-sysctl
-	$(LN) $(RCSVDIR)/binfmt $(DESTDIR)$(RCDIR)/sysinit/95-binfmt
+	$(LN) $(RCSVDIR)/fsck $(DESTDIR)$(RCDIR)/sysinit/20-fsck
+	$(LN) $(RCSVDIR)/mount-fs $(DESTDIR)$(RCDIR)/sysinit/30-mount-fs
+	$(LN) $(RCSVDIR)/swap $(DESTDIR)$(RCDIR)/sysinit/31-swap
+	$(LN) $(RCSVDIR)/random-seed $(DESTDIR)$(RCDIR)/sysinit/40-modules
+	$(LN) $(RCSVDIR)/net-lo $(DESTDIR)$(RCDIR)/sysinit/41-net-lo
+	$(LN) $(RCSVDIR)/hostname $(DESTDIR)$(RCDIR)/sysinit/42-hostname
+	$(LN) $(RCSVDIR)/sysctl $(DESTDIR)$(RCDIR)/sysinit/55-sysctl
+	$(LN) $(RCSVDIR)/binfmt $(DESTDIR)$(RCDIR)/sysinit/90-binfmt
 	$(LN) $(RCSVDIR)/cleanup $(DESTDIR)$(RCDIR)/sysinit/99-cleanup
 
 	install -d $(DESTDIR)$(RCDIR)/shutdown
 
 	$(LN) $(RCSVDIR)/random-seed $(DESTDIR)$(RCDIR)/shutdown/10-random-seed
-	$(LN) $(RCSVDIR)/cleanup $(DESTDIR)$(RCDIR)/shutdown/20-cleanup
+	$(LN) $(RCSVDIR)/hwclock $(DESTDIR)$(RCDIR)/shutdown/15-hwclock
 	$(LN) $(RCSVDIR)/udev $(DESTDIR)$(RCDIR)/shutdown/30-udev
-	$(LN) $(RCSVDIR)/misc $(DESTDIR)$(RCDIR)/shutdown/40-misc
+	$(LN) $(RCSVDIR)/cleanup $(DESTDIR)$(RCDIR)/shutdown/20-cleanup
 	$(LN) $(RCSVDIR)/swap $(DESTDIR)$(RCDIR)/shutdown/50-swap
-	$(LN) $(RCSVDIR)/root $(DESTDIR)$(RCDIR)/shutdown/60-root
-	$(LN) $(RCSVDIR)/remount-root $(DESTDIR)$(RCDIR)/shutdown/70-remount-root
+	$(LN) $(RCSVDIR)/mount-fs $(DESTDIR)$(RCDIR)/shutdown/60-mount-fs
 
 	install -d $(DESTDIR)$(MANDIR)/man8
 	install -m644 script/modules-load.8 $(DESTDIR)$(MANDIR)/man8

sv.d/bootlogd.in

@@ -1,34 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-start_bootlogd(){
-    bootlogd -p /run/bootlogd.pid -l /var/log/boot.log || return 1
-}
-
-stop_bootlogd(){
-    [[ -f /run/bootlogd.pid ]] || return 0
-    touch /var/log/boot.log
-    kill $(< /run/bootlogd.pid)
-    rm -f /run/bootlogd.pid
-}
-
-case "$1" in
-    start)
-        stat_busy "Starting bootlogd"
-        start_bootlogd || stat_die bootlogd
-        add_daemon bootlogd
-        stat_done bootlogd
-        ;;
-    stop)
-        stat_busy "Stopping bootlogd"
-        stop_bootlogd || stat_die bootlogd
-        rm_daemon bootlogd
-        stat_done bootlogd
-        ;;
-    *)
-        echo "usage: $0 {start|stop}"
-        exit 1
-        ;;
-esac

sv.d/cgroups.in

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# sourcing our current rc.conf requires this to be a bash script
+sourcing our current rc.conf requires this to be a bash script
 . @RCLIBDIR@/functions
 . @RCDIR@/rc.conf
 
@@ -36,61 +36,7 @@ cgroup1_base(){
 }
 
 cgroup1_controllers(){
-    ${HAVE_CONTROLLER1_GROUPS} && [ -e /proc/cgroups ]  && grep -qw cgroup /proc/filesystems || return 0
-    while read -r name _ _ enabled _; do
-        case "${enabled}" in
-            1)	if mountpoint -q "/sys/fs/cgroup/${name}";then continue;fi
-                local x
-                for x in $CGROUP_CONTROLLERS; do
-                    [ "${name}" = "blkio" ] && [ "${x}" = "io" ] &&
-                        continue 2
-                    [ "${name}" = "${x}" ] &&
-                    continue 2
-                done
-                mkdir "/sys/fs/cgroup/${name}"
-                mount -n -t cgroup -o "${CGROUP_OPTS},${name}" "${name}" "/sys/fs/cgroup/${name}"
-            ;;
-        esac
-    done < /proc/cgroups
-    return 0
-}
-
-cgroup2_base(){
-    grep -qw cgroup2 /proc/filesystems || return 0
-    local base
-    base="$(cgroup2_find_path)"
-    mkdir -p "${base}"
-    mount -t cgroup2 none -o "${CGROUP_OPTS},nsdelegate" "${base}" 2> /dev/null ||
-        mount -t cgroup2 none -o "${CGROUP_OPTS}" "${base}"
-    return 0
-}
-
-cgroup2_controllers(){
-    grep -qw cgroup2 /proc/filesystems || return 0
-    local active cgroup_path x y
-    cgroup_path="$(cgroup2_find_path)"
-    [ -z "${cgroup_path}" ] && return 0
-    [ -e "${cgroup_path}/cgroup.controllers" ] && read -r active < "${cgroup_path}/cgroup.controllers"
-    for x in ${CGROUP_CONTROLLERS}; do
-        for y in ${active}; do
-            [ "$x" = "$y" ] && [ -e "${cgroup_path}/cgroup.subtree_control" ] &&
-            echo "+${x}"  > "${cgroup_path}/cgroup.subtree_control"
-        done
-    done
-    return 0
-}
-
-cgroups_hybrid(){
-    cgroup1_base
-    cgroup2_base
-    cgroup2_controllers
-    cgroup1_controllers
-    return 0
-}
-
-cgroups_legacy(){
-    cgroup1_base
-    cgroup1_controllers
+...skipping...
     return 0
 }
 

sv.d/cleanup.in

@@ -17,14 +17,20 @@ cleaning(){
 
 case "$1" in
     start)
-        stat_busy "Starting cleanup"
+        stat_busy "Cleaning up"
         cleaning
         add_daemon cleanup
         stat_done
         ;;
     stop)
-        stat_busy "Stopping cleanup"
-        halt -w || stat_die
+        halt -w # Well, this actually does nothing.
+        stat_busy "Sending TERM signal to processes"
+        pkill --inverse -s0,1 -TERM
+        sleep 1
+        stat_done
+        stat_busy "Sending KILL signal to processes"
+        pkill --inverse -s0,1 -KILL
+        sleep 1
         rm_daemon cleanup
         stat_done
         ;;

sv.d/console-setup.in

@@ -22,7 +22,7 @@ config(){
 
 case "$1" in
     start)
-        stat_busy "Starting console-setup"
+        stat_busy "Setting up console fonts and keymaps"
         config
         add_daemon console-setup
         stat_done
@@ -32,3 +32,4 @@ case "$1" in
         exit 1
         ;;
 esac
+

sv.d/cryptsetup.in

@@ -1,7 +1,6 @@
 #!/bin/bash
 
 . @RCLIBDIR@/functions
-
 do_unlock_device() {
 	# $1 = requested name
 	# $2 = source device
@@ -17,7 +16,7 @@ do_unlock_device() {
 		b=$1
 	else
 		printhl "Non-LUKS partitions are not supported at the moment."
-		continue
+		return 1
 	fi
 	if [[ $4 ]]; then
 		for i in ${4//,/ }; do
@@ -29,9 +28,10 @@ do_unlock_device() {
 				"keyfile-offset"*) opts+="--keyfile-offset ${i##*=}" ;;
 				"key-slot"*) opts+="-S ${i##*=}" ;;
 				*)
-					printhl "The option is not currently supported at the moment."
+					printhl "The option '${i%%=*}' is not currently supported at the moment."
+					printhl "Partition '$2' cannot be unlocked."
 					printhl "Please add an issue to https://github.com/artix-linux/runit-rc"
-					continue
+					return 1
 				;;
 			esac
 		done
@@ -80,7 +80,6 @@ do_unlock() {
 	fi
 
 	do_unlock_device "$name" "$device" "$password" "$options"
-	esac
 	failed=$?
 	if (( $failed )); then
 		printf "${C_FAIL}Unlocking of $1 failed.${C_CLEAR}\n"
@@ -90,7 +89,9 @@ do_unlock() {
 
 do_lock() {
 	#status "Detaching encrypted device ${1}"
-	cryptsetup luksClose "$1" >/dev/null
+	for v in $(dmsetup ls --target crypt --exec "dmsetup info -c --noheadings -o open,name"); do
+		[ ${v%%:*} = "0" ] && cryptsetup --debug close ${v##*:}
+	done
 }
 
 read_crypttab() {
@@ -113,16 +114,24 @@ case "$1" in
         stat_busy "Starting encrypted devices"
         read_crypttab do_unlock
         rc=$?
+        # [[ -f /run/sv.d/started/lvm2 ]] && vgchange --sysinit -a y >/dev/null
+        # Using the above, $? will return >0, which results in stat_die.
+        if [[ -f /run/sv.d/started/lvm2 ]]; then
             vgchange --sysinit -a y >/dev/null
+        fi
         (( rc || $? )) && stat_die
         add_daemon cryptsetup
         stat_done
         ;;
     stop)
         stat_busy "Stopping encrypted devices"
-        vgchange --sysinit -a n &>/dev/null
+        #[[ -f /run/sv.d/started/lvm2 ]] && vgchange --sysinit -a n &>/dev/null
+        # Using the above, $? will return >0, which results in stat_die.
+        if [[ -f /run/sv.d/started/lvm2 ]]; then
+            vgchange --sysinit -a y >/dev/null
+        fi
         rc=$?
-        read_crypttab do_lock
+        do_lock
         (( rc || $? )) && stat_die
         rm_daemon cryptsetup
         stat_done

sv.d/devfs.in

@@ -1,25 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-mount_devfs(){
-    mountpoint -q /dev     || mount -t devtmpfs dev /dev -o mode=0755,nosuid
-    mkdir -p /dev/{pts,shm}
-    mountpoint -q /dev/pts || mount -t devpts devpts /dev/pts -o mode=0620,gid=5,nosuid,noexec
-    mountpoint -q /dev/shm || mount -t tmpfs shm /dev/shm -o mode=1777,nosuid,nodev
-    mountpoint -q /run || mount -t tmpfs run /run -o mode=0755,nosuid,nodev
-}
-
-case "$1" in
-    start)
-        stat_busy "Mounting dev filesystem"
-        mount_devfs
-        add_daemon devfs
-        stat_done
-        ;;
-    *)
-        echo "usage: $0 {start}"
-        exit 1
-        ;;
-esac

sv.d/dmesg.in

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-config(){
-    if [[ -e /proc/sys/kernel/dmesg_restrict ]] &&
-    (( $(< /proc/sys/kernel/dmesg_restrict) == 1 )); then
-        install -Tm 0600 <( dmesg ) /var/log/dmesg.log
-    else
-        install -Tm 0644 <( dmesg ) /var/log/dmesg.log
-    fi
-}
-
-case "$1" in
-    start)
-        stat_busy "Saving dmesg log"
-        config
-        add_daemon dmesg
-        stat_done
-        ;;
-    *)
-        echo "usage: $0 {start|stop}"
-        exit 1
-        ;;
-esac

sv.d/fsck.in

@@ -1,9 +1,7 @@
 #!/bin/bash
 
-# sourcing our current rc.conf requires this to be a bash script
 . @RCLIBDIR@/functions
 
-# Check local filesystems
 fsck_all() {
     if [[ -f /forcefsck ]] || in_array forcefsck $(< /proc/cmdline); then
         FORCEFSCK="-f"
@@ -13,10 +11,9 @@ fsck_all() {
         IGNORE_MOUNTED="-M"
     fi
 
-    fsck -A -T -C${FSCK_FD} -a -t no${NETFS//,/,no},noopts=_netdev ${IGNORE_MOUNTED} -- ${FORCEFSCK}
+    fsck -A -T -a -t no${NETFS//,/,no},noopts=_netdev ${IGNORE_MOUNTED} ${FORCEFSCK}
 }
 
-# Single-user login and/or automatic reboot after fsck (if needed)
 fsck_reboot() {
     # $1 = exit code returned by fsck
     # Ignore conditions 'FS errors corrected' and 'Cancelled by the user'
@@ -44,14 +41,13 @@ fsck_reboot() {
         echo
         sulogin -p
     fi
-    echo "Automatic reboot in progress..."
+    echo "Automatic reboot in progress"
     umount -a
     mount -o remount,ro /
     reboot -f
-    exit 0
 }
 
-do_fsck(){
+do_fsck() {
     if [[ -x $(type -P fsck) ]]; then
         fsck_all >|"${FSCK_OUT:-/dev/stdout}" 2>|"${FSCK_ERR:-/dev/stdout}"
         declare -r fsckret=$?
@@ -61,27 +57,17 @@ do_fsck(){
     fsck_reboot $fsckret
 }
 
-kill_all(){
-    pkill --inverse -s0,1 -TERM
-    sleep 1
-    pkill --inverse -s0,1 -KILL
-}
-
 case "$1" in
     start)
+        stat_busy "Remounting rootfs to read-only"
+        mount -o remount,ro /
+        stat_done
         stat_busy "Checking filesystems"
         do_fsck
-        add_daemon misc
-        stat_done
-        ;;
-    stop)
-        stat_busy "Running kill-all"
-        kill_all
-        rm_daemon misc
+        add_daemon fsck
         stat_done
     ;;
     *)
-        echo "usage: $0 {start|stop}"
-        exit 1
+        echo "usage: $0 {start}"
     ;;
 esac

sv.d/hostname.in

@@ -9,16 +9,15 @@ config(){
     if [[ -s /etc/hostname ]]; then
         HOSTNAME=$(< /etc/hostname)
     fi
-
-    if [[ $HOSTNAME ]]; then
-        echo "$HOSTNAME" >| /proc/sys/kernel/hostname
-    fi
 }
 
 case "$1" in
     start)
-        stat_busy "Starting hostname"
         config
+        stat_busy "Setting hostname to $HOSTNAME"
+        if [[ $HOSTNAME ]]; then
+            echo "$HOSTNAME" >| /proc/sys/kernel/hostname
+        fi
         add_daemon hostname
         stat_done
         ;;

sv.d/hwclock.in

@@ -13,13 +13,13 @@ esac
 
 case "$1" in
     start)
-        stat_busy "Adjusting hwclock"
+        stat_busy "Adjusting hwclock to ${HARDWARECLOCK}"
         hwclock $HWCLOCK_PARAMS || stat_die
         add_daemon hwclock
         stat_done
         ;;
     stop)
-        stat_busy "Adjusting hwclock"
+        stat_busy "Adjusting hwclock to ${HARDWARECLOCK}"
         hwclock --adjust $HWCLOCK_PARAMS || stat_die
         rm_daemon hwclock
         stat_done
@@ -33,4 +33,3 @@ case "$1" in
         echo "usage: $0 {start|stop|restart}"
         ;;
 esac
-

sv.d/kmod-static-nodes.in

@@ -3,15 +3,16 @@
 # sourcing our current rc.conf requires this to be a bash script
 . @RCLIBDIR@/functions
 
-conig(){
-    [[ -d /run/tmpfiles.d ]] || mkdir /run/tmpfiles.d
-    kmod static-nodes --format=tmpfiles --output=/run/tmpfiles.d/kmod.conf
+config() {
+    for f in $(kmod static-nodes 2>/dev/null|awk '/Module/ {print $2}'); do
+        modprobe -bq $f 2>/dev/null
+    done
 }
 
 case "$1" in
     start)
-        stat_busy "Starting kmod-static-nodes"
-        conig
+        stat_busy "Loading static kernel modules"
+        config
         add_daemon kmod-static-nodes
         stat_done
     ;;

sv.d/lvm-monitoring.in

@@ -1,22 +0,0 @@
-#!/bin/bash
-
-. @RCLIBDIR@/functions
-
-case "$1" in
-    start)
-        stat_busy "Starting monitoring of LVM2 groups"
-        vgchange --monitor y >/dev/null || stat_die
-        add_daemon lvm-monitoring
-        stat_done
-        ;;
-    stop)
-        stat_busy "Stopping monitoring of LVM2 groups"
-        vgchange --monitor n || stat_die
-        rm_daemon lvm-monitoring
-        stat_done
-        ;;
-    *)
-        echo "usage: $0 {start|stop}"
-        exit 1
-        ;;
-esac

sv.d/lvm.in

@@ -1,22 +0,0 @@
-#!/bin/bash
-
-. @RCLIBDIR@/functions
-
-case "$1" in
-    start)
-        stat_busy "Starting LVM2 groups"
-        vgchange --sysinit -a y >/dev/null || stat_die
-        add_daemon lvm
-        stat_done
-        ;;
-    stop)
-        stat_busy "Stopping LVM2 groups"
-        vgchange --sysinit -a n &>/dev/null || stat_die
-        rm_daemon lvm
-        stat_done
-        ;;
-    *)
-        echo "usage: $0 {start|stop}"
-        exit 1
-        ;;
-esac

sv.d/modules.in

@@ -5,9 +5,8 @@
 
 load_modules() {
     local rc=0
-
     /usr/bin/modules-load
-	(( rc+=$? ))
+    (( rc+= $? ))
 
     return $rc
 }
@@ -24,4 +23,3 @@ case "$1" in
         exit 1
         ;;
 esac
-

sv.d/mount-all.in

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-case "$1" in
-    start)
-        stat_busy "Starting mount-all"
-        mount -a -t "no${NETFS//,/,no}" -O no_netdev || stat_die mount-all
-        add_daemon mount-all
-        stat_done mount-all
-        ;;
-    *)
-        echo "usage: $0 {start}"
-        exit 1
-        ;;
-esac

sv.d/mount-fs.in

@@ -0,0 +1,27 @@
+#!/bin/bash
+
+. @RCLIBDIR@/functions
+
+case "$1" in
+    start)
+        stat_busy "Mounting / read-write"
+        mount -o remount,rw / || stat_die mount-fs
+        stat_done
+        stat_busy "Mounting all non-network filesystems"
+        mount -a -t "nosysfs,nonfs,nonfs4,nosmbfs,nocifs" -O no_netdev || stat_die mount-fs
+        add_daemon mount-fs
+        stat_done
+    ;;
+    stop)
+        stat_busy "Unmounting filesystems"
+        umount -r -a -t nosysfs,noproc,nodevtmpfs,notmpfs
+        stat_done
+        stat_busy "Remounting / read-only"
+        mount -o remount,ro /
+        stat_done
+        sync
+    ;;
+    *)
+        echo "usage: $0 {start|stop}"
+    ;;
+esac

sv.d/net-lo.in

@@ -5,7 +5,7 @@
 
 case "$1" in
     start)
-        stat_busy "Starting net-lo"
+        stat_busy "Setting up loopback interface"
         ip link set up dev lo || stat_die
         add_daemon net-lo
         stat_done

sv.d/netfs.in

@@ -1,34 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-case "$1" in
-    start)
-        stat_busy "Mounting network filesystems"
-        mount -a -t "$NETFS"
-        rc=$?
-        mount -a -O _netdev
-        (( rc || $? )) && stat_die
-        add_daemon netfs
-        stat_done
-        ;;
-    stop)
-        stat_busy "Unmounting network filesystems"
-        umount -a -f -O _netdev
-        rc=$?
-        umount -a -f -t "$NETFS"
-        (( rc || $? )) && stat_die
-        rm_daemon netfs
-        stat_done
-        ;;
-    restart)
-        $0 stop
-        sleep 1
-        $0 start
-        ;;
-    *)
-        echo "usage: $0 {start|stop|restart}"
-        exit 1
-        ;;
-esac

sv.d/procfs.in

@@ -1,21 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-mount_procfs(){
-    mountpoint -q /proc || mount -t proc proc /proc -o nosuid,noexec,nodev
-}
-
-case "$1" in
-    start)
-        stat_busy "Mounting proc filesystem"
-        mount_procfs
-        add_daemon procfs
-        stat_done
-        ;;
-    *)
-        echo "usage: $0 {start}"
-        exit 1
-        ;;
-esac

sv.d/pseudofs.in

@@ -0,0 +1,50 @@
+#!/bin/bash
+
+# sourcing our current rc.conf requires this to be a bash script
+. @RCLIBDIR@/functions
+
+mount_procfs(){
+    mountpoint -q /proc || mount -t proc proc /proc -o nosuid,noexec,nodev
+}
+
+mount_sysfs() {
+    mountpoint -q /sys || mount -t sysfs sys /sys -o nosuid,noexec,nodev
+    mountpoint -q /sys/kernel/security || mount -n -t securityfs securityfs /sys/kernel/security
+    if [ -d /sys/firmware/efi ]; then
+        mountpoint -q /sys/firmware/efi/efivars || mount -n -t efivarfs -o ro efivarfs /sys/firmware/efi/efivars
+    fi
+}
+
+mount_runfs() {
+    mountpoint -q /run || mount -o mode=0755,nosuid,nodev -t tmpfs run /run
+    mkdir -p /run/{runit,lvm,user,lock,log}
+}
+
+mount_devfs() {
+    mountpoint -q /dev || mount -o mode=0755,nosuid -t devtmpfs dev /dev
+    mkdir -p -m0755 /dev/{pts,shm}
+    mountpoint -q /dev/pts || mount -o mode=0620,gid=5,nosuid,noexec -n -t devpts devpts /dev/pts
+    mountpoint -q /dev/shm || mount -o mode=1777,nosuid,nodev -n -t tmpfs shm /dev/shm
+}
+
+case "$1" in
+    start)
+        stat_busy "Mounting proc filesystem"
+        mount_procfs
+        stat_done
+        stat_busy "Mounting sys filesystem"
+        mount_sysfs
+        stat_done
+        stat_busy "Mounting run filesystem"
+        mount_runfs
+        stat_done
+        stat_busy "Mounting devfs"
+        mount_devfs
+        stat_done
+        add_daemon pseudofs
+    ;;
+    *)
+        echo "usage: $0 {start}"
+        exit 1
+    ;;
+esac

sv.d/random-seed.in

@@ -14,13 +14,13 @@ save_seed(){
 
 case "$1" in
     start)
-        stat_busy "Starting random-seed"
+        stat_busy "Initializing random seed"
         load_seed
         add_daemon random-seed
         stat_done
         ;;
     stop)
-        stat_busy "Stopping random-seed"
+        stat_busy "Saving random seed"
         save_seed
         rm_daemon random-seed
         stat_done

sv.d/remount-root.in

@@ -1,24 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-case "$1" in
-    start)
-        stat_busy "Remounting root filesystem rw"
-        mount -o remount,rw / || stat_die remount-root
-        add_daemon remount-root
-        stat_done remount-root
-        ;;
-    stop)
-        stat_busy "Remounting root filesystem ro"
-        mount -o remount,ro / || stat_die remount-root
-        sync
-        rm_daemon remount-root
-        stat_done remount-root
-        ;;
-    *)
-        echo "usage: $0 {start|stop}"
-        exit 1
-        ;;
-esac

sv.d/root.in

@@ -1,63 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-mount_fs(){
-    findmnt / --options ro &>/dev/null || mount -o remount,ro / || return 1
-    return 0
-}
-
-# umount_fs(){
-#     umount -r -a -t nosysfs,noproc,nodevtmpfs,notmpfs
-# }
-
-umount_fs() {
-    findmnt -mrunRo TARGET,FSTYPE,OPTIONS / | {
-        while read -r target fstype options; do
-            # interpret the ascii chars, such as \x20 (space)
-            printf -v target '%b' "$target"
-            # match only targeted fstypes
-            if [[ $1 && $1 != "$fstype" ]]; then
-                continue
-            fi
-
-            # do not unmount API filesystems
-            if [[ $target = /@(proc|sys|run|dev|dev/pts) ]]; then
-                continue
-            fi
-
-            # avoid networked devices
-            IFS=, read -ra opts <<< "$options"
-            if in_array _netdev "${opts[@]}"; then
-                continue
-            fi
-
-            mounts=("$target" "${mounts[@]}")
-        done
-
-        if (( ${#mounts[*]} )); then
-            umount -r "${mounts[@]}" || return 1
-        fi
-        return 0
-    }
-}
-
-case "$1" in
-    start)
-        stat_busy "Mounting filesystems"
-        mount_fs || stat_die root
-        add_daemon root
-        stat_done root
-        ;;
-    stop)
-        stat_busy "Unounting filesystems"
-        umount_fs || stat_die root
-        rm_daemon root
-        stat_done root
-        ;;
-    *)
-        echo "usage: $0 {start|stop}"
-        exit 1
-        ;;
-esac

sv.d/swap.in

@@ -12,7 +12,7 @@ case "$1" in
     ;;
     stop)
         stat_busy "Deactivating swap"
-        swapoff -a || stat_die swap
+        swapoff -a
         rm_daemon swap
         stat_done swap
     ;;

sv.d/sysfs.in

@@ -1,23 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-mount_sysfs(){
-    mountpoint -q /sys     || mount -t sysfs sys /sys -o nosuid,noexec,nodev
-    mountpoint -q /sys/kernel/security || mount -n -t securityfs securityfs /sys/kernel/security
-    [ -d /sys/firmware/efi ] && (mountpoint -q /sys/firmware/efi/efivars || mount -n -t efivarfs -o ro efivarfs /sys/firmware/efi/efivars)
-}
-
-case "$1" in
-    start)
-        stat_busy "Mounting sys filesystem"
-        mount_sysfs
-        add_daemon sysfs
-        stat_done
-        ;;
-    *)
-        echo "usage: $0 {start}"
-        exit 1
-        ;;
-esac

sv.d/sysusers.in

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-case "$1" in
-    start)
-        stat_busy "Starting sysusers"
-        sysusers
-        add_daemon sysusers
-        stat_done
-        ;;
-    *)
-        echo "usage: $0 {start}"
-        exit 1
-        ;;
-esac

sv.d/timezone.in

@@ -1,35 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-case "$1" in
-    start)
-        stat_busy "Setting timezone"
-        zonefile=/usr/share/zoneinfo/$TIMEZONE
-
-#         [[ $TIMEZONE ]] || return 1
-
-        if [[ ! -L /etc/localtime && /etc/localtime -ef $zonefile ]]; then
-            ln -sf "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
-        fi
-        add_daemon timezone
-        stat_done
-        ;;
-    stop)
-        stat_busy "Setting timezone"
-        zonefile=/usr/share/zoneinfo/$TIMEZONE
-
-#         [[ $TIMEZONE ]] || return 1
-
-        if [[ ! -L /etc/localtime && /etc/localtime -ef $zonefile ]]; then
-            ln -sf "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
-        fi
-        rm_daemon timezone
-        stat_done
-        ;;
-    *)
-        echo "usage: $0 {start|stop}"
-        exit 1
-        ;;
-esac

sv.d/tmpfiles-setup.in

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-case "$1" in
-    start)
-        stat_busy "Starting tmpfiles-setup"
-        tmpfiles --exclude-prefix=/dev --create --remove --boot || stat_die tmpfiles-setup
-        add_daemon tmpfiles-setup
-        stat_done tmpfiles-setup
-        ;;
-    *)
-        echo "usage: $0 {start}"
-        exit 1
-        ;;
-esac

sv.d/udev-settle.in

@@ -1,19 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-case "$1" in
-    start)
-        stat_busy "Waiting for udev uevents to be processed"
-        udevadm settle || stat_die udev-settle
-        calc_columns
-        add_daemon udev-settle
-        stat_done udev-settle
-        ;;
-    *)
-        echo "usage: $0 {start}"
-        exit 1
-        ;;
-esac
-

sv.d/udev-trigger.in

@@ -1,21 +0,0 @@
-#!/bin/bash
-
-# sourcing our current rc.conf requires this to be a bash script
-. @RCLIBDIR@/functions
-
-case "$1" in
-    start)
-        stat_busy "Triggering udev uevents"
-        udevadm trigger --action=add --type=subsystems
-        ret=$?
-        udevadm trigger --action=add --type=devices
-        (( ret || $? )) && stat_die udev-trigger
-        add_daemon udev-trigger
-        stat_done udev-trigger
-        ;;
-    *)
-        echo "usage: $0 {start}"
-        exit 1
-        ;;
-esac
-

sv.d/udev.in

@@ -5,15 +5,15 @@
 
 case "$1" in
     start)
-        # check if runit already runs udevd
-        if ! pgrep -f "runsv udevd" >/dev/null 2>&1; then
-            stat_busy "Starting udev daemon"
-            udevd --daemon || stat_die udev
-            # Note: This is only needed for initialization, udev will
-            #       be controlled by runit on stage 2.
-            add_daemon udev
-            stat_done udev
+        if ! pgrep -f "runsv udevd" >/dev/null; then
+            stat_busy "Starting udev and waiting for devices to settle"
+            udevd --daemon
+            udevadm trigger --action=add --type=subsystems
+            udevadm trigger --action=add --type=devices
+            udevadm settle
+            stat_done
         fi
+        add_daemon udev
     ;;
     stop)
         stat_busy "Stopping udev"
@@ -26,4 +26,3 @@ case "$1" in
         exit 1
     ;;
 esac
-