When only downloading a package, pacman can produce some incorrect
output.
> pacman -Sddw nvidia-utils
warning: nvidia-utils-270.41.19-1 is up to date -- reinstalling
This line is now now silenced when using -Sw.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When creating a source package using an non-local buildscript via
the -p option, the inclusion of changelog and install files would
fail. Fixes FS#24567.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#24534. Dotfiles, such as /etc/skel/.bash_profile, were not
being included in generated files entries. bsdtar --exclude option
supports anchors on the pattern, so using "^.*" instead of ".*" solves
our problem and still excludes all root-level dotfiles (e.g. .PKGINFO).
Signed-off-by: Dan McGee <dan@archlinux.org>
If getcols() returns 0, we were getting stuck before in a loop of no
return. Teach getcols() to take a default value to return if the width
is unknown, and use this everywhere as appropriate.
Also make a few other cleanups while diagnosing this issue, such as
const-ifying some variables.
Noticed-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When I switched all paths to use `` formatting, I didn't realize
substitution didn't work in these quote marks. Use ++ instead to ensure
attributes are substituted where appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
These addditional attributes come from the git asciidoc.conf file. Also,
fix a place where we used {treename} without escaping the braces,
causing the generated manpage to be missing text.
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#24292. If one does the bad thing of not checking
pm_errno after calling set_dbpath(), you may not realize the
initialization process went wrong and calling trans_init() resulted in a
segfault. If we don't have a lockfile path, bail out and have
trans_init() fail.
Also remove a ALPM_LOG_FUNC call that was causing pm_errno to return "no
handle"; this was due to a log call in the handle setup (whereby the log
attempts to use a callback attached to the handle).
Signed-off-by: Dan McGee <dan@archlinux.org>
This is at best a hack around the way we currently do our --print magic,
but at least prevents someone from shooting themselves in the foot as
indicated in FS#24287.
Signed-off-by: Dan McGee <dan@archlinux.org>
Issue FS#24230. If a symlink is broken and included in the removal
process of a package, we blew up and segfaulted due to
alpm_compute_md5sum() returning NULL and then performing a strcmp()
operation.
Signed-off-by: Dan McGee <dan@archlinux.org>
Don't call os.stat() when we should be using os.lstat(); this allows us
to actually test dead symlinks that don't have a corresponding file. Add
a new LINK_EXIST rule that complements FILE_EXIST for a similar purpose.
Signed-off-by: Dan McGee <dan@archlinux.org>
The addition of the DB version check introduces a lag time between the
lockfile creation and the transaction initialization. In cases where the
local DB is large enough and/or the user's disk is slow enough, this
time is significant enough that its possible for a user to send a SIGINT
and leave behind a db.lck file.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add quotes around $srcdir/$pkgdir (FS#23960) and use a package()
function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Change "which" to "that" when used in a restrictive clause.
Replace usage of the relative prounoun "those" with a common noun for
added clarity.
Signed-off-by: Matt Mooney <mfm@muteddisk.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
GNU su supports the -c option to specify a command to execute.
However, other flavours of su may have a different interpretation
of the '-c' flag (e.g. FreeBSD and OpenBSD).
The behaviour is correct when '-c' follows an explicit username.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The current state of the code does not allow to see immediately
that it returns a list of pmdepmissing_t structures.
Signed-off-by: Dan McGee <dan@archlinux.org>
Some systems, like FreeBSD might define both statfs
and statvfs: however if statvfs exists whereas getmntinfo()
uses a statfs struct, the current ifdefs would select the wrong
line of code.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
A non-GNU version of awk may not support the (|...) syntax for
an optional group and require '()' to match an empty string.
The (...)? syntax is more appropriate for this usage.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Trailing backslahses can lead to additional spaces at the front
of extracted entries. See FS#23524. Strip these while parsing
the PKGBUILD entries.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The vercmptest script needs to be invoked as a bash script for this to
be valid; the -p operator is interpreted as an argument to look up by
sh. This goes way back to commit 3bf9448943, done to solve
http://mailman.archlinux.org/pipermail/pacman-dev/2008-July/007180.html.
Saw this problem running in a virtual machine where sh is not bash, but
in fact dash:
user@debian-powerpc:~/projects/pacman$ ./test/util/vercmptest.sh
src/util/vercmp-p: not found
src/util/vercmp is src/util/vercmp
vercmp binary (src/util/vercmp) could not be located
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no reason to not support versions of libarchive that lack
ARCHIVE_COMPRESSION_UU. Distributions should work properly without
this.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Addresses FS#23492, where the question was shown without knowing what
one was answering to. Ensure we flush our output streams before printing
the question, and flush the stream on which we ask the question before
waiting for an answer.
Signed-off-by: Dan McGee <dan@archlinux.org>
So we don't segfault when calling this on be_sync loaded packages. They
return logical values as much as possible for indicating there is no
changelog available.
Signed-off-by: Dan McGee <dan@archlinux.org>
We didn't do this sanity check before trying to open an archive. If
the alpm dbpath wasn't set, the sync database dbpath would be NULL,
causing us to hang indefinitely in archive_read_open_filename() rather
than erroring out.
We already have a corresponding check in local_db_populate().
The following program will test this case, and hangs before this patch
without the call to set_dbpath:
int main(int argc, char *argv[]) {
alpm_initialize();
// alpm_option_set_dbpath("/var/lib/pacman/");
pmdb_t *core = alpm_db_register_sync("core");
pmpkg_t *pkg = alpm_db_get_pkg(core, "pacman");
return 0;
}
Signed-off-by: Dan McGee <dan@archlinux.org>
The use of "tr" only leads to trouble. Remove unnecessary usage
of it from within makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
to quote dan:
"turkish will FUCK YOU UP. this is not the first or the last time"
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Many alpm_option_get/set_*() functions already check this
and set pm_errno to the right value, but not all, so
this improves consistency.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#23424. The -dd backend code was introduced in commit
b6ec9019d7, and unfortunately the munged depend used for comparison did
not carry through to the eventual display of this version. To fix this,
we undo some of the depcmp_tolerant() business introduced, and instead
make a new pmdepend_t object if necessary when the no dependency version
flag is set. This results in the correct depend being copied to the
missing depend passed onto the frontend.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Address FS#23433 by documenting -d vs. -dd
* Drop the useless "as well", "also", "too", and "that won't break
packages" strings from -R usage
* Fix alignment of multiline strings in source (no string change)
Signed-off-by: Dan McGee <dan@archlinux.org>
My main motivation was to remove the "sync", which can stall for
minutes on a busy machine (FS#23378). I also cleaned up the redirection.
Signed-off-by: Jan Steffens <jan.steffens@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman 3.5.0 removed alpm_db_register_local, so calling
alpm_db_unregister_all leaves the front end in a position where there's
no local db, and no way to re-register it.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix the way we were referring to paths (use ``), .pac* extensions (use
''), and other general things across our main manpages.
Signed-off-by: Dan McGee <dan@archlinux.org>
Wrap lines of long length, noticed while creating and messing around
with some of the other maint branch patches.
Signed-off-by: Dan McGee <dan@archlinux.org>
Noticed with the openoffice/libreoffice replacement scheme where many
packages are listed as replacements to one package, thus electing it for
removal multiple times. Ensure a given package is not already present
before placing it in the removal list.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a rather serious data corruption issue that luckily manifested
itself today in a noticable way. A package in testing had replaces
entries read in as ["%RE pkgname", "%RE"] which was clearly wrong. This
happens when we hit the end of an archive block, do not have a newline,
and have to continue reading from the next block to complete the line.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unnecessary output when using -Sp. Fixes FS#23340.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is by no means a guarantee of this behavior remaining the same in
the future, but it is easy enough to do what we used to in this case by
delaying any sort of error condition until after we are completely done
parsing options. Addresses FS#23370.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a Debian patch (from #347650) that makes libtool play nicely
with "-Wl,--as-needed".
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
Noted in FS#23342. When the user attempts to install an ignored package
and answers no when asked whether to install it, pacman bails out with:
"error: target not found: packagename"
This is because satisfiers are not found for the package and execution
continues to process_group(), where the package is treated as a group
(which does not exist).
In addition, test ignore006.py is updated with PACMAN_RETCODE=0 since
saying no to installing an ignored package should not be considered an
error.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Prevents issues where optdepends descriptions contain a bracket.
Also, strip all comments from arrays before joining them.
Fixes FS#23307.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We erroniously dropped the call to _alpm_delta_parse() when macro-izing,
causing segfaults for repos that provide deltas. Addresses FS#23314.
Signed-off-by: Dan McGee <dan@archlinux.org>
Partially addresses the "why doesn't CheckSpace work in a chroot" issue.
We can't make it work, but we can at least detect when it won't work by
checking for a partition for our given installation root. If we can't
determine the mountpoint for this, bail out with an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the term 'packages' to 'targets' in the synopsis as well, since
command line parameters could just as well be groups, repos, or URLs.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes all the pacman developers' jobs harder as we have to switch
files whenever running multiple pacman versions and are using newly
introduced options. Instead of erroring out, print warnings and continue
on.
This patch also fixes a const-correctness issue. We immediately cast a
'const char *' to a 'char *' in setrepeatingoption(), which is just
plain wrong as we manipulate the underlying string. Fix the types and
remove the now unnecessary variable.
Finally, a few messages change here for consistency and clarity and
because we continue parsing rather than bailing out on a problem.
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents a regression for people who enjoy piping yes to pacman to
avoid prompts.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was totally screwed under a 'make distcheck' invocation. Bring it
inline with what we have (and what works!) in scripts/Makefile.am. This
was broken/introduced in commit 05f0a28932.
Signed-off-by: Dan McGee <dan@archlinux.org>
repo-add can add a "files" entry into the sync db. Currently we
do nothing with this file, so explicitly skip it to prevent
unknown database file warnings.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Our keywords were all screwed up in this regard. Fix it so our
ngettext() shortcut calls are actually recognized and respected.
Signed-off-by: Dan McGee <dan@archlinux.org>
I managed to just make deptest001.py fail by changing a DEBUG-level
logger in commit b12be99c89. This should not be this fickle. Enhance the
OUTPUT rule to use an actual Python re object when looking for matches,
and make a lot of the rules use stronger patterns to match with.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#23090, a rather serious problem where the user was completely
unable to read the local database. Even if entry->d_type is available,
the given filesystem providing it may not fill the contents, in which
case we should fall back to a stat() as we did before. In this case, the
filesystem was XFS but there may be others.
Signed-off-by: Dan McGee <dan@archlinux.org>
A lot of these were places that should have used the same message but
didn't, or were very easy to convert to using the same message and
letting some of the burden off of the translators.
Signed-off-by: Dan McGee <dan@archlinux.org>
Printing the exact size seems to make more sense for scripting contexts.
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
[Dan: adjust for master before VerbosePkgLists patches, fix type]
Signed-off-by: Dan McGee <dan@archlinux.org>
Ensure we have a local DB version that is up to par with what we expect
before we go down any road that might modify it. This should prevent
stupid mistakes with the 3.5.X upgrade and people not running
pacman-db-upgrade after the transaction as they will need to.
Signed-off-by: Dan McGee <dan@archlinux.org>
We only call these from the transaction init and teardown, so move them
to that file, mark them static, and push more of the logic of handle
manipulation into these functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
According to FOPEN(3), using fclose on an fdopen'd file stream also
closes the underlying file descriptor. This happened in _alpm_lckmk
(util.c), which meant that when alpm_trans_release closed it again, the
log file (which reused the original file descriptor) was closed instead.
Signed-off-by: Jonathan Conder <jonno.conder@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If you were doing a -Qo via xargs, it is at least nice to see what input
caused the error message to occur rather than having a bunch of plain
messages. This matches the style when we can't find the owner of a file.
Signed-off-by: Dan McGee <dan@archlinux.org>
There's no API functions exposed which allow manipulation of this type,
so remove it from public view. Also, rename the public and private
alpm_db_get_pkgcache symbol to alpm_db_get_pkgcache_has.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This case currently fails, but highlights a failure in our install
process I experienced the other day. Because we don't do replacement
uninstalls inline with the rest of the upgrade uninstalls, we can have a
time on our system where a critical package is not installed.
I hope no one ever renames glibc.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows error messages emitted by the frontend to be a bit more
descriptive and not have the annoying "well why didn't you tell me that
the first time" problem. If a package had multiple missing deps, we
would bail on the first one before rather than finish processing all
missing dependencies, and only print one error message. Instead,
continue through this entire set of missing deps and append all eventual
errors.
The added pactest tests this case, as the to be installed package has
two missing dependencies. However, pactest does not actually test or see
the difference in output from before and after, so it passes in both
cases, but it is clearly visible in the logs.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is old code that has since gone stale; we no longer ever add
anything to this list so no need to keep it around and check the
contents during extraction.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Make conflict_isin() static; it is used nowhere else.
* Remove does_conflict(): it turns out to be replaceable by a single call to
_alpm_depcmp(). By pushing it up, we can reduce calls to _alpm_splitdep()
from 60,368 to 16,940 during one test -Su operation I ran.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Use stat() and not lstat(); we don't care for the size of the symlink if
it is one, we want the size of the reference file.
* FS#22896, fix local database estimation on platforms that don't abide by
the nlink assumption for number of children.
* Fix a missing newline on an error message.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change _alpm_graph_new() to use CALLOC to avoid explicit zeroing out of fields
in pmgraph_t.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Turn it into an enum rather than a boolean, and use a bitmask like we do for
reading DB entries. The relevant flag is turned on in our two calculate
loops, and anything reading the used flag later can decided which flag (or
either) is relevant.
This will allow the read-only partition code to be triggered on a
remove-only operation, e.g. if /boot was read-only and one tried to remove
grub in a sync transaction. Of course, right now, we don't actually run the
diskspace check code in the '-R' codepath.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit of a stopgap solution for the problem, but an easier one than
revamping the file conflict checking code to support the same stuff. Using
some more gross autoconf magic, figure out which struct field we need to
look at to determine read-only status and store that on our mountpoint
struct. If we find out we needed this partition after calculating size
requirements, then toss an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
In the getmntinfo() section, the local variable mnt doesn't exist; this
would have caused a compile error if I had tested the code on such a
platform. Unify both codepaths to just run strlen() on the already copied
mount path instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
In packages, our description file contains:
key = value is here
type entries, and we passed "key " and " value is here" to our strtrim
function, causing us to always memmove the value portion to remove the
space. Since this is a throwaway buffer, do the advancing on our own before
trimming to save the need to shift memory around; "value is here" will now
be passed and strtrim will be responsible for trailing whitespace.
Signed-off-by: Dan McGee <dan@archlinux.org>
When generating integrity sums, we could get some weird output before due to
epoch being uninitialized:
/usr/bin/makepkg: line 234: [[: 2.6.37: syntax error: invalid arithmetic operator (error token is ".6.37")
Signed-off-by: Dan McGee <dan@archlinux.org>
We did this in some but not all cases, assuming the 0 value coming out of
libarchive would not be a problem. However, this does not work for "fake"
filesystems such as rpc_pipefs, which reports a free block and total block
count of zero.
Fix this by not ever counting symlinks or directories, and adding a note
explaining that if we someday do count directories, their size needs to be
attributed to the proper place.
This patch also includes a few cleanups/performance tweaks- avoid calling
strlen() on the mountpoint directory string as much by storing this size in
our mountpoint struct, and push the snprintf() call up to the calculate
functions since we were already doing it here in the remove case.
Signed-off-by: Dan McGee <dan@archlinux.org>
The overlapping code in _alpm_pkghash_add() and _alpm_pkghash_add_sorted()
are now in a new static function pkghash_add_pkg(). This function has a
third flag parameter which determines whether the package should be added in
sorted order.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In sync_db_populate() and local_db_populate(), a NULL db->pkgcache is not
caught, allowing the functions to continue instead of exiting.
A later alpm_list_msort() call which uses alpm_list_nth() will thus traverse
invalid pointers in a non-existent db->pkgcache->list.
pm_errno is set to PM_ERR_MEMORY as _alpm_pkghash_create() will only return
NULL when we run out of memory / exceed max hash table size. The local/sync
db_populate() functions are also exited.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Adding the "|| true" to the subshell prevents bash-3.2 setting off the
error_trap but requires changing the if statement.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When reading the "desc" file in _alpm_local_db_read(), some
strings are trimmed and checked for length > 0 before their
use/duplication subsequently. They are then trimmed again
when there is no need to.
The following code snippet should illustrate it clearly:
while(fgets(line, sizeof(line), fp) &&
strlen(_alpm_strtrim(line))) {
char *linedup;
STRDUP(linedup, _alpm_strtrim(line), goto error);
info->groups = alpm_list_add(info->groups, linedup);
}
This patch removes the redundant _alpm_strtrim() calls in
_alpm_local_db_read() such as the one inside the STRDUP shown
above.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
PM_ERR_WRITE is defined in alpm.h but not handled in
alpm_strerror(). This patch corrects that.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We located files in a few places but didn't check if they were files or
directories. Ensure they are actually files using stat() and S_ISREG(); this
showed itself when trying to download to the directory name itself in
FS#22645.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than potentially move every item to the next NULL, attempt to move at
most one item at a time by iterating backwards from the NULL location in the
hash array. If we move an item, we repeat the process on the now shorter
"chain" until no more items need moving.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This takes in the list and a list item, and does the pointer dance necessary
to remove it from the list regardless of whether it is first, last, or
somewhere in the middle. It is useful for callers that already know what
item needs to be removed and have a pointer to it rather than doing a search
by data that the plain alpm_list_remove() does.
Refactor alpm_list_remove() to use this function as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fully removes a package from the hash. Also unify prototype with
removal from an alpm_list_t, fixing issues when removing a package
from the pkgcache.
Signed-off-by: Allan McRae <allan@archlinux.org>
While probably still not optimal in terms of everyday usage in
pacman, this reduces the absolute size increase to "more reasonable"
levels. For databases greater than 5000 in size, the minimum size
increase is used which is still on the order of a 10% increase.
Signed-off-by: Allan McRae <allan@archlinux.org>
Check that the requested size of a pkghash is not beyond the maximum
prime. Also check for successful creation of a new hash before
rehashing.
Signed-off-by: Allan McRae <allan@archlinux.org>
Since the sync database never changes size once we initialize it, we
allow it to be filled a bit more. This reduces the overall memory
footprint needed by the hash table.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to get through the rehash required by smoke001 and pass
all pactests. It is by no means the best or most efficient
implementation but it does do the job.
Signed-off-by: Dan McGee <dan@archlinux.org>
Read the package information for sync/local databases into a pmpkghash_t
structure.
Provide a alpm_db_get_pkgcache_list() method that returns the list from
the hash object. Most usages of alpm_db_get_pkgcache are converted to
this at this stage for ease of implementation. Review whether these are
better accessing the hash table directly at a later stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
This works for both local and sync databases in slightly different ways. For
the local database, we can use the directory hard link count on the local/
folder. For sync databases, we use the archive size coupled with some
computed average per-package sizes to determine an estimate.
This is currently a dead assignment once calculated, but could be used to
set the initial size of a hash table.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The current behaviour, which is placing source packages in PKGDEST if
SRCPKGDEST is not set, is inconsistent with {SRC,PKG}DEST handling and
there is no real advantage in doing so.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
At least in FreeBSD, find always returns 0 if it finds stuff
(imagine that). It doesn't care about the exit status of whatever is
passed to -exec.
This patch makes the checks compatible with this behaviour.
Using xargs and not using grep directly because packages with too many
files would cause grep to complain about argument list being too long.
This should also fix the false positive in packages with no files.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Noted in FS#22697. When I factored out _alpm_parsedate() into a common
function, I didn't move the <locale.h> include properly, causing a build
failure when NLS is disabled and this header isn't automatically included
everywhere.
Signed-off-by: Dan McGee <dan@archlinux.org>
This flag allows to disable version checking in dependency resolving
code.
depcmp_tolerant respects the NODEPVERSION flag but we still keep the
original strict depcmp. The idea is to reduce the impact of the
NODEPVERSION flag by using it in fewer places.
I replaced almost all depcmp calls by depcmp_tolerant in deps.c (except
in the public find_satisfier used by deptest / pacman -T), but I kept
depcmp in sync.c and conflict.c
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
No reason to disallow this- it allows keeping even more packages around in
the cache. Test cases included for this case and to ensure the default
behavior is preserved.
Signed-off-by: Dan McGee <dan@archlinux.org>
The first two are rather standard tests of our two available clean options,
and the third is attempting to test a reported bug (and failing to make the
given case fail).
Signed-off-by: Dan McGee <dan@archlinux.org>
It's likely that these interfaces will break sooner or later, now that
pacman no longer uses them.
So better force the two people who use them to migrate their code to the
new add_pkg/remove_pkg interface, which is very easy anyway.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This function is used both for provision and group selection. Now the
database name will be displayed.
$ pacman -S base-devel
:: There are 11 members in group base-devel:
:: Repository testing
1) make
:: Repository core
2) autoconf 3) automake 4) bison 5) fakeroot 6) flex 7) gcc 8) libtool 9) m4 10) patch 11) pkg-config
Which ones do you want to install?
Enter a number (default=all):
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Make use of parseindex like in multiselect, and loop until we get a
valid answer like in multiselect.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Old interface is marked as deprecated:
int alpm_sync_target(char *target);
int alpm_sync_dbtarget(char *db, char *target);
int alpm_add_target(char *target);
int alpm_remove_target(char *target);
New recommended interface:
int alpm_add_pkg(pmpkg_t *pkg);
int alpm_remove_pkg(pmpkg_t *pkg);
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Note that there is a behavior change here : if the same package name
appeared several times in the target list, the alpm_add_target interface
chooses the new package, while alpm_add_pkg returns PKG_DUP.
I don't see why we cannot unify the behavior of -S and -U, and just
choose one behavior that applies to both.
Otherwise, it's always possible to handle these different behaviors in
the frontend, it just requires more work.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
For consistency with alpm_add_pkg.
The new recommended interface is alpm_add_pkg / alpm_remove_pkg, all
others interfaces are deprecated.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This uses the new public functions to handle targets from the frontend,
like it used to be :
1) alpm_find_dbs_satisfier to find (optionally versioned) package or
provision
2) alpm_find_grp_pkgs to find members for a groups
3) alpm_add_pkg to finally add the pmpkg_t from 1 or 2
Of course, this adds more code to the frontend, but it completely
deprecates sync_target and sync_dbtarget interfaces.
This all-in-one interfaces felt wrong and left no control to the
frontend. A good frontend should just use alpm_add_pkg, with pkg coming
from alpm_db_get_pkg (for normal targets), alpm_find_dbs_satisfier (for
versioned provisions) or alpm_find_grp_pkgs (for groups).
This also opens the way to provide a better group handling in pacman
without constraint from libalpm and callbacks.
In ignore006, only the retcode changes, because no package was found to
satisfy the target (the only possible package is ignored).
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This group function is meant to help group handling from frontend : it
scans all dbs, handling ignored packages and duplicate members (the
first repo where a member is found has the priority).
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This new function is meant to deprecate all existing
sync/add target functions :
int alpm_sync_target(char *target);
int alpm_sync_dbtarget(char *db, char *target);
int alpm_add_target(char *target);
Rather than dropping these 3 interfaces, it might be better to rewrite
them using alpm_add_pkg for now.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This is a public interface for resolvedep. It looks nicer to expose it
this way rather than through sync_target.
This function can also be helpful for external tools as it should give
good results close to how pacman select a package for satisfying a given
dep.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
If there are multiple providers in one db, pacman used to just stop at
the first one (both during dependency resolution or for pacman -S
'provision' which uses the same code).
This adds a new conversation callback so that the user can choose which
provider to install. By default (user press enter or --noconfirm), the
first provider is still chosen, so for example the behavior of sync402
and 403 is preserved. But at least the user now has the possibility to
make the right choice in a manual run.
If one of the provider is already installed, it is picked for
reinstall/upgrade, so that provision 002/003 pactest now pass.
$ pacman -S community/smtp-server
:: There are 3 providers available for smtp-server:
1) courier-mta 2) esmtp 3) exim
Which one do you want to install?
Enter a number (default=1):
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
We were piecemeal passing fields from the test object in and it was getting
out of hand, and future work would have added yet another argument. Instead,
just pass the entire test object and entrust the rule to get what it needs.
Signed-off-by: Dan McGee <dan@archlinux.org>
Perform the cheap struct and string setup of the local DB at handle
initialization time to match the teardown we do when releasing the handle.
If the local DB is not needed, all real initialization is done lazily after
DB paths and other things have been configured anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
We explicitly place 'pkgbase' (and used to place 'force') fields inside
PKGINFO files, so ignore them silently instead of printing an error for
them. Also make the error message for unknown keys actually contain the key.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will make a 404 a silent failure that returns an error code rather than
0 as was previously done, screwing up the logic used by pacman/libalpm to
allow moving onto the next server on a failed download. Fixes FS#22630.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were returning a package error code rather than a DB one, and we
would leak the archive memory if the database file didn't exist.
Signed-off-by: Dan McGee <dan@archlinux.org>
Before any non-matching line would trigger some perl warnings about
undefined variables. If a line doesn't match, just show it to the user
unprocessed; this is seen with warning and error messages pacman not so
helpfully emits on stdout rather than stderr.
Signed-off-by: Dan McGee <dan@archlinux.org>
We didn't have the proper dependencies specified for our scripts after
the move to *.in extensions, so a change to a file didn't trigger a
rebuild. Also remove old stuff from .gitignore.
Signed-off-by: Dan McGee <dan@archlinux.org>
Clean up some of the code by doing less string copying and printing. This is
accomplished by either doing it after we know we need it, or taking
advantage of the fact that some strings never change such as the root
directory prefix. Also, fix an issue where a file at the root level (e.g.
/foobar) could not be queried.
End result is a much faster user experience when combined with the
mbasename() changes. These timings are for looking up 113 files in /etc/,
some of which are owned and some which are not.
$ find /etc -maxdepth 1 -type f | xargs time pacman -Qo >/dev/null
6.10user 0.05system 0:06.17elapsed 99%CPU (0avgtext+0avgdata 131040maxresident)k
0inputs+0outputs (0major+9436minor)pagefaults 0swaps
$ find /etc -maxdepth 1 -type f | xargs time ./src/pacman/.libs/lt-pacman -Qo >/dev/null
0.86user 0.04system 0:00.92elapsed 99%CPU (0avgtext+0avgdata 131120maxresident)k
0inputs+0outputs (0major+9436minor)pagefaults 0swaps
I'll take a 600% increase in speed.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than roll our own, use strrchr() instead, which glibc may have a
better implementation than the simple iteration method we were using.
Signed-off-by: Dan McGee <dan@archlinux.org>
These deal with already-installed packages and how they should be the
preferred provider in cases where provider selection now occurs. A few
involve multiple sync repos.
Signed-off-by: Dan McGee <dan@archlinux.org>
The order was non-deterministic before, and just happened to work for
sync023.py as it was written. Ensure there is some sort of predictable
ordering.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of always printing MISSING, we can switch on the errno value set by
access() and print a more useful string. In this case, handle files we can't
read by printing UNREADABLE, print MISSING on ENOENT, and print UNKNOWN for
anything else. Fixes FS#22546.
Signed-off-by: Dan McGee <dan@archlinux.org>
And also change "Not Modified" -> "UNMODIFIED" for consistency. This makes
it a lot easier to machine-parse this and not worry about locale
differences.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove all logic dealing with PKG_MODIFIED as this rule no longer exists.
This removes a bunch of unnecessary stat and checksum logic that most of the
time we were never even using. Also update the file modified checks to mark
every file created using mkfile() with an older time so any modified checks
will just work without hacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
All conditions that this particular rule tested are better served by using a
more specific rule, whether that be checking a package version or whether
files inside the package have changed or still exist.
Signed-off-by: Dan McGee <dan@archlinux.org>
dirty indicates if the repo has uncommited changes or not when building,
so dont hardcode this info.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
repo-add should only attempt to create the delta file when using the -d
option.
Also adjust a couple of tests to use the "double bracket" syntax.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allan, I had no idea you were not listed here. I think you count as an
active developer at the moment. Also, move Aaron to the past contributors
section.
Signed-off-by: Dan McGee <dan@archlinux.org>
This includes info on version comparison that is very similar to the stuff
in the pacman manpage, but also a few vercmp examples, the return values,
and other fun stuff.
Also update the version comparison stuff in the pacman manpage.
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes things consistent with everywhere else we are incorporating the
new optional epoch field. Add a helper function that forms the version
string for you and use it in makepkg where I found 'pkgver.*-.*pkgrel'.
This exposes a few shortcomings in a previous "Override pkgver" patch
(2020e629) in the install package and check if built functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead, go the same route we have always taken with version-release in
libalpm and treat it all as one piece of information. Makepkg is the only
script that knows about epoch as a distinct value; from there on out we will
parse out the components as necessary.
This makes the code a lot simpler as far as epoch handling goes. The
downside here is that we are tossing some compatibility to the wind;
packages using force will have to be rebuilt with an incremented epoch to
keep their special status.
Signed-off-by: Dan McGee <dan@archlinux.org>
Adapting from RPM, follow the [epoch:]version[-release] syntax. We can also
borrow some of their parsing code for our purposes (thanks!). Add some new
tests to our vercmp shell script tester for epoch comparisons, and then make
the code work with these newfangled epoch specifiers.
Signed-off-by: Dan McGee <dan@archlinux.org>
Since it is the same string. Done with some bash looping and sed magic.
for src in po/*.po; do
echo $src
newtrans=$(grep -A1 "msgid.*$1" $src | tail -n1)
newtrans=${newtrans//\\/\\\\}
echo "$newtrans"
fname=${src##*/}
dest=lib/libalpm/po/$fname
sed -i -e "/msgid.*$1/{N; s/msgstr.*$/$newtrans/}" $dest
done
Signed-off-by: Dan McGee <dan@archlinux.org>
In most (all?) cases, we will process all files for a given sync database
entry sequentially. The code currently does an _alpm_pkg_find() for every
file in the database, but we had the "current" package readily available.
Shift some local variables around a bit to expose this to sync_db_read() and
use it if the package is the correct one.
On my system, this cuts calls to _alpm_pkg_find() from 20,769 to 10,349
calls during a -Qu operation, and results in a ~30% speedup of the same
operation (0.35 sec -> 0.27 sec). This benefit should be apparent anywhere
we read in the full contents of the sync databases.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to create a temporary copy of the string if we are smart with
our pointer manipulation and string copying. This saves a bunch of string
duplication during database parsing, both local and sync.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the need for an unconditional string duplication by using pointer
arithmetic instead, and strndup() instead of an unspecified-length strdup().
This should reduce memory churn a fair amount as this is called pretty
frequently during database loads.
Signed-off-by: Dan McGee <dan@archlinux.org>
We haven't tweaked this in a while, but some of the old stuff seems to no
longer be necessary and there are a few new things we should add.
Signed-off-by: Dan McGee <dan@archlinux.org>
Confirming the current behavior. And yes, the error message is still no
better than it was when this was reported 3.5 years ago.
Signed-off-by: Dan McGee <dan@archlinux.org>
When installing packages from a file, the integrity check count
stays at (0/x) complete. This ensures it is bumped to (x/x) at
the end of the process.
Signed-off-by: Dan McGee <dan@archlinux.org>
It is pretty annoying to get one, fix it, and then get another. We should be
able to continue on through most of the sanity checks in one go so the user
gets all the error messages at once.
Also ensure $pkgbase is defined by the time we call this function;
previously we printed nothing where a package name should have been due to
this oversight.
Signed-off-by: Dan McGee <dan@archlinux.org>
I tried to move things around here when testing and did a bit too much; the
warning message always showed regardless of delta inclusion in the call. Fix
it so we only warn if we have a filename, but the file couldn't be located.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is essentially a backport/cherry-pick of commit 33240e87b9 from
master, but has to be done by hand because the DB format has diverged. Read
more in the commit message used there, which follows.
Due to the way we funk around with package data loading, we had a condition
where the filelist got doubled up because it was loaded twice.
Packages are originally loaded with INFRQ_BASE. In an upgrade/sync, the
package is checked for file conflicts next, leaving us in an "INFRQ_BASE |
INFRQ_FILES" state. Later, when committing a single package, we have an
explicit call to _alpm_local_db_read() with INFRQ_ALL as the level. Because
the package's level did not match this, we skipped over our previous "does
the incoming level match where I'm at" shortcut, and continued to load
things again, because of a lack of fine-grained checking for each of DESC,
FILES, and INSTALL.
The end result is we loaded the filelist twice, causing our remove logic to
iterate twice over the installed files, spewing a bunch of "cannot find file
X" messages.
Fix the problem by doing a bit more bitmasking logic throughout the load
method, and also fix the sanity check at the beginning of the function- this
should *only* be used for local packages as opposed to the "not a package"
check that was there before.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will prevent duplicates, which we had plenty of once I made a few tests
that had a list of files greater than the normal two. The previous logic was
not working quite right.
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 0d4dd09993)
After all the debate as to what to do on maint, we are going to end up just
incorporating epoch into the version string, so we don't need this separate
field at all. Revert commit 5c8083baa4 and also kill the force flag we were
recording here as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
Due to the way we funk around with package data loading, we had a condition
where the filelist got doubled up because it was loaded twice.
Packages are originally loaded with INFRQ_BASE. In an upgrade/sync, the
package is checked for file conflicts next, leaving us in an "INFRQ_BASE |
INFRQ_FILES" state. Later, when committing a single package, we have an
explicit call to _alpm_local_db_read() with INFRQ_ALL as the level. Because
the package's level did not match this, we skipped over our previous "does
the incoming level match where I'm at" shortcut, and continued to load
things again, because of a lack of fine-grained checking for each of DESC,
FILES, and INSTALL.
The end result is we loaded the filelist twice, causing our remove logic to
iterate twice over the installed files, spewing a bunch of "cannot find file
X" messages.
Fix the problem by doing a bit more bitmasking logic throughout the load
method, and also fix the sanity check at the beginning of the function- this
should *only* be used for local packages as opposed to the "not a package"
check that was there before.
A debug log message was added to upgraderemove as well to match the one
already in the normal remove codepath.
Signed-off-by: Dan McGee <dan@archlinux.org>
libarchive eventually calls it anyway, but backtraces make a lot more sense
if we call it, as well as matching our precedent from alpm_pkg_load().
Signed-off-by: Dan McGee <dan@archlinux.org>
This is helpful anyway to the user, and should also be helpful to us if we
see problems cropping up in the check during development.
Also add a missing ->used = 0 initialization in the code path less taken.
Signed-off-by: Dan McGee <dan@archlinux.org>
Although they won't be the same in the gettext catalog because of the '\n'
we should still use the same text.
Signed-off-by: Dan McGee <dan@archlinux.org>
This can take a while too, and it is really easy to add the necessary
callback stuff for adding a progressbar.
Signed-off-by: Dan McGee <dan@archlinux.org>
These were just two small things I came across today and found could be
fixed or helpful, so I've added them and I'm not sure what else to bundle
them with. commit_count++
Signed-off-by: Dan McGee <dan@archlinux.org>
These are probably useful anyway, but also exposed the double file list bug
that will be fixed in a later commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will prevent duplicates, which we had plenty of once I made a few tests
that had a list of files greater than the normal two. The previous logic was
not working quite right.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than explicit cd calls, we can use the directory stack to our
advantage. This also removes the need to store and restore $startdir, so
kill the variable entirely.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Remove a stale comment
* Fix a logic error- the conditional disagreed with the comments
* Remove some unnecessary floating point casts
Signed-off-by: Dan McGee <dan@archlinux.org>
We were checking if a package existed locally, but then using the
incoming package to calculate removed size rather than the currently
installed package.
Also adjust the local variable in the replaces loop to make it more
clear that we are always dealing with local packages here.
Signed-off-by: Dan McGee <dan@archlinux.org>
All of these can be done with integer division; the only slightly
interesting part is ensuring we round up like before with calling the
ceil() function.
We can also remove the math library from requirements; now that the only
ceil() calls are gone, we don't need this anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
file_pkg_ops can be a static struct like in other backends, we just need
to initialize it at some point.
Dan: add initialization flag.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
None of these warn at the normal "-Wall -Werror" level, but casts do occur
that we are fine with. Make them explicit to silence some warnings when
using "-Wconversion".
Signed-off-by: Dan McGee <dan@archlinux.org>
There is a lot of swtiching between size_t and int for alpm_list sizes
in the codebase. Start converting these to all be size_t by adjusting
the return type of alpm_list_count and fixing all additional warnings
given by -Wconversion that are generated by this change.
Dan: a few more small changes to ensure things compile, adjusting some
printf format string characters to accommodate the larger size on x86_64.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
And change the wording slightly to indicate we *print* a value, not *return*
it. You can't return negative values (they get coerced to 255), so it isn't
worth it to try and cram the result into the return code.
Acked-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
All functions that are limited to the local translation unit are
declared static. This exposed that the _pkg_get_deltas declaration
in be_local.c was being satified by the function in packages.c which
when declared static caused linker failures.
Fixes all warnings with -Wmissing-{declarations,prototypes}.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* FS#19854 (--ignore is ignored with groups)
* http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html
(operation aborts when a package from a group is ignored/and user chooses
not to install it)
If a group member is ignored, we expect
a) a question whether to install
b) after saying 'no' to a), the ignored member not to be installed
c) all other group members to be installed
d) pacman to execute successfully
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 9d0b33fd33)
Add the "buildflags" option, which is useful in its negative form
for disabling CFLAGS, CXXFLAGS and LDFLAGS when building a package.
This is useful when determining of one of these flags is causing
an issue with a package.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
A PKGBUILD can have an option check() function for running test suites
between the build() and package() stages. This function is run by
default but can be disabled globally in with "!check" in BUILDENV in
makepkg.conf. This setting can be controlled on an individual package
basis using makepkg's --check and --nocheck flags. Addition dependencies
needed for running the test suite can be specified in the checkdepends
array and are only checked when running the check() function.
Original-work-by: Jeff C <jeff@kcaccess.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We use PATH_MAX everywhere by including limits.h so there is no
point in doing a check for it in a different header when dealing
with FreeBSD's libfetch.
Also, remove autoconf check for strings.h header as it is not used
anywhere.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
POSIX does not require PATH_MAX be defined when there is not actual
limit to its value. This affects HURD based systems. Work around
this by defining PATH_MAX to 4096 (as on Linux) when this is not
defined.
Also, clean up inclusions of limits.h and remove autoconf check for
this header as we do not use macro shields for its inclusion anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The closing parenthesis of bash arrays needs to be escaped in the ending
address of awk expressions in order to play nicely with implementations
of awk other than gawk. This change provides compatibility with gawk,
nawk and mawk.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, using $pkgname in a split package package_*() function
always returns the first value in the pkgname array rather than the
name of tha package being packaged. Fix this so $pkgname gives the
expected value.
Fixes FS#22174
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Just like we did for package name comparsions, if we add a depend name_hash
field on depend struct initialization, we can use it instead of doing a
string name comparison, saving us a lot of checks in the depcmp code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Noticed when tweaking testdb, when we run _alpm_depcmp in loops and call it
seven million times, the strdup()/free() combo can add up. Remove the need
for any string duplication by some pointer manipulation and use of strncmp
instead of strcmp. Also kill the function logger and add an escape so we
don't needlessly retrieve the list of provides.
Signed-off-by: Dan McGee <dan@archlinux.org>
This creates two packages with extremely long description lines (500KB and
600 KB), causing our archive read code to perform reallocation to store the
whole contents. One of the packages will successfully read while the other
will fail for the time being.
Signed-off-by: Dan McGee <dan@archlinux.org>
And modify the code to not print the full rule string if it is more than 40
characters long; truncate it instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old function was written in a time before we relied on it for nearly
every operation. Since then, we have switched to the archive backend and now
fast parsing is a big deal.
The former function made a per-character call to the libarchive
archive_read_data() function, which resulted in some 21 million calls in a
typical "load all sync dbs" operation. If we instead do some buffering of
our own and read the blocks directly, and then find our newlines from there,
we can cut out the multiple layers of overhead and go from archive to parsed
data much quicker.
Both users of the former function are switched over to the new signature,
made easier by the macros now in place in the sync backend parsing code.
Performance: for a `pacman -Su` (no upgrades available),
_alpm_archive_fgets() goes from being 29% of the total time to 12% The time
spent on the libarchive function being called dropped from 24% to 6%.
This pushes _alpm_pkg_find back to the title of slowest low-level function.
Signed-off-by: Dan McGee <dan@archlinux.org>
Sync DB's no longer have an extracted directory, so remove the files check
for those. Local databases no longer have a 'depends' file, so kill that
check as well. Finally, do a little other cleanup and remove the need for
PATH_MAX.
Signed-off-by: Dan McGee <dan@archlinux.org>
The amount of diskspace needed for a transaction can be less than
zero. Only test this against the available disk space if it is
positive, which avoids a comparison being made between signed and
unsigned types (-Wsign-compare).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Always declare a function with (void) rather than () when we expect
no arguements. Fixes all warnings with -Wstrict-prototypes.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We should always use $BUILDSCRIPT instead of PKGBUILD. The only
remaining uses of PKGBUILD in makekg are in comments.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This simplifies a lot of the repetative code and makes it obvious where the
tricky or different ones are (e.g. depends, dates). It also makes it
significantly easier to change the way this code works in the future.
There should be no functional change with this patch.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some basic documentation for the PKGEXT and SRCEXT options in
makepkg.conf. Fixes FS#21302.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Saves a few bytes due to padding (256 -> 248 bytes), especially on x86_64,
so we get the overhead of our new hash field right back.
Signed-off-by: Dan McGee <dan@archlinux.org>
This results in huge gains to a lot of our codepaths since this is the most
frequent method of random access to packages in a list. The gains are seen
in both profiling and real life.
$ pacman -Sii zvbi
real: 0.41 sec -> 0.32 sec
strcmp: 16,669,760 calls -> 473,942 calls
_alpm_pkg_find: 52.73% -> 26.31% of time
$ pacman -Su (no upgrades found)
real: 0.40 sec -> 0.50 sec
strcmp: 19,497,226 calls -> 524,097 calls
_alpm_pkg_find: 52.36% -> 26.15% of time
There is some minor risk with this patch, but most of it should be avoided
by falling back to strcmp() if we encounter a package with a '0' hash value
(which we should not via any existing code path). We also do a strcmp once
hash values match to ensure against hash collisions. The risk left is that a
package name is modified once it was originally set, but the hash value is
left alone. That would probably result in a lot of other problems anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is prepping for the addition of a hash field to each package to greatly
speed up the string comparisons we frequently do on package name in
_alpm_pkg_find.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than error out, this is easy enough. Looks quite similar to the code
in be_local for creating the local directory.
Signed-off-by: Dan McGee <dan@archlinux.org>
The pacman-db-upgrade script was added to detect old pacman database
formats and upgrade them.
Currently performs the merging of depends files into desc files in
the local database.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Whenever depends is needed from the local db, so is desc. The only
disadvantage to merging them is the additional time taken to read the
depends entries when they are not needed. As depends is in general
relatively small, the additional time taken to read it in will be
negligable. Also, merging these files will speed up local database
access due to less file seeks.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This should hopefully address some of the concerns raised in FS#11639 with
regards to continuing after filling the disk up.
Add some more checks and passing of error conditions between our functions.
When a libarchive warning is encountered, check if it is due to lack of disk
space and if so upgrade it to an error condition. A review of other
libarchive warnings suggests that these are less critical and can remain as
informative warning messages at this stage.
Note the presence of errors after extraction of an entire package is complete.
If so, we abort the transaction to be on the safe side and keep damage to a
minimum.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: make ENOSPC warning into an error]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than hiding these warnings, show them to the user as they happen.
This will prevent things such as hiding full filesystem errors (ENOSPC) from
the user as seen in FS#11639.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: adjust warning wording and add gettext calls]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Whether it be "desc", "depends", or "deltas", it really doesn't matter-
treat them all the same and have the ability to read any data from any file
in that list. This continues the work in a44c7b8956.
Signed-off-by: Dan McGee <dan@archlinux.org>
We are comparing a floating point number so should use an inequality
rather than implicitly testing != 0.
Prevents warning given by -Wfloat-equal.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Check the over-ridden entries for provides, backup, optdepends and
options for illegal entries. Partially fixes FS#16004.
Signed-off-by: Allan McRae <allan@archlinux.org>
* Use our normal return() function syntax
* Rework a few things to reduce number of casts
* Fix void function argument declaration
* Add missing gettext _() call
* Remove need for seperate malloc() of statvfs/statfs structure
* Unify argument order of static functions- mountpoints now always
passed first
* Count all files that start with '.' in a package against the DB
* Rename db to db_local in check_diskspace to clarify some code
* Fix some line wrapping to respect 80 characters
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Turn it into a configure-type typedef, which allows us to reduce the
amount of duplicated code and clean up some #ifdef magic in the code
itself. Adjust some of the other defined checks to look at the headers
available rather than trying to pull in the right ones based on
configure checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Checking disk space needed for a transaction can take a while so add
an informative progress bar.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Disk space checking is likely to be an unnecessary bottleneck to
people with reasonable partition sizes so add a configuration option
to allow it to be disabled/enabled as wanted.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pull together the work of the previous commits to implement a check
for enough free space before performing an install transaction. Abort
if there is not enough free space with an appropriate pm_errno..
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Two helper function are added to calculate the disk usage from packages
that are either currently installed on the system or from a package
archive.
Some minor approximations have been made:
1. Size for directories is not considered when removing a package from the
filesystem to avoid multiple counting across packages. Also, these are
reported to take zero size while installing.
2. Symlinks are reported to contribute zero size towards removal as
libarchive reports them to have zero size for install.
3. Package data files (.PKGINFO, .INSTALL, .CHANGELOG) are counted towards
usage on dbpath on install, but their size is not counted on package
removal.
4. No handling of extra size needed for .pacsave/.pacnew files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
For a given file, determine which mount point it is on or will be
installed to. Take into account that we might be using an alternative
installation root.
Add additional helper function added to sort mount point list for easier
matching.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a mount_point_list() function that attempts to portably obtain
a list of system mount points and a struct to hold needed mount point
information.
Abort the transaction if we are unable to determine the mount points.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Very basic prototyping for adding functionality to check free disk
space before performing package installs.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This macro is deemed unnecessary by even the autoconf guys, so we really
don't need to use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We were including the header in a lot of places it is no longer used.
Additionally, use the correct autoconf macro for determining whether
d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a delta specific definition so it makes more sense to put
it in the delta specific header file.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow us to eventually combine the depends and desc entries
within the sync database.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The error message that has been removed never gets to print because, given the
same condition, handle_deps throws the same error and then immediately exits
makepkg.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
As check_deps is run in a subshell, exit had the same meaning as return.
Since the intention is to halt makepkg when pacman throws an error other than
127, the enclosing function has to handle error control instead.
Fixes FS#19840
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The escape string isn't necesarily \033; it's determined by what the
particular termcap/info entry for that terminal contains.
Bash uses ncurses functions to expand \e to the _correct_ terminal
escape.
Signed-off-by: Carlos Diaz <839273@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows to very easily support non-color and linear mode, by just
setting the variables to an empty string, very much like it was done in
the bash script.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
The deps walking code simply calls print_start, print, print_end, and
all the printing logic is handled there.
The unresolvable printing is disabled for now because it does not handle
linear mode, and the linear and color output will be re-written.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Use the bash script in contrib as the basis for a C rewrite using
libalpm. The speedup can go from dozens of seconds to less than one
second.
Colorized output is preserved.
The --graph option generates output that graphviz's `dot' utility will
understand to draw us a graph. Output is written to stdout and it is
left up to the user to pipe the data and determine the output
characteristics.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
When a -Sk or -Uk operation induced a removal of an existing local
package, --dbonly was not in effect and the files were all removed.
Fixing this behavior was already marked as TODO in database012 pactest
------------
TODO: I honestly think the above should NOT delete the original les, it
hould upgrade the DB entry without touching anything on the file stem.
E.g. this test should be the same as:
pacman -R --dbonly dummy && pacman -U --dbonly dummy.pkg.tar.gz
------------
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
[Dan: small coding style touchup]
Signed-off-by: Dan McGee <dan@archlinux.org>
Example with pacman -Uh :
$ pacman -Uh
options:
-b, --dbpath <path> set an alternate database location
-d, --nodeps skip dependency checks
-f, --force force install, overwrite conflicting files
-k, --dbonly only modify database entries, not package files
-r, --root <path> set an alternate installation root
-v, --verbose be verbose
--arch <arch> set an alternate architecture
--asdeps install packages as non-explicitly installed
--asexplicit install packages as explicitly installed
--cachedir <dir> set an alternate package cache location
--config <path> set an alternate configuration file
--debug display debug messages
--ignore <pkg> ignore a package upgrade (can be used more than once)
--ignoregroup <grp>
ignore a group upgrade (can be used more than once)
--logfile <path> set an alternate log file
--noconfirm do not ask for any confirmation
--noprogressbar do not show a progress bar when downloading files
--noscriptlet do not execute the install scriptlet if one exists
--print only print the targets instead of performing the operation
--print-format <string>
specify how the targets should be printed
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
[Dan: small coding style touchups]
Signed-off-by: Dan McGee <dan@archlinux.org>
The three parts (help, manpage and code) are now organized in the same
way and much easier to compare :
- specific options
- install/upgrade options for -S and -U
- transaction options for -S -R and -U
- global options
After this re-organization, it was easy to update and sync the three
components together. Duplication is also avoided.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Either we expose all low levels function dealing with pmdepend_t
(splitdep and depfree come to mind), or we don't.
Since none of the tools use depcmp, I chose to remove it. In the future,
we might want to expose higher level functions such as
alpm_find_satisfier, or just lower level functions like splitdep and
depfree together with depcmp.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This has been replaced by the more flexible alpm_find_satisfier
function, and alpm_deptest was completely unsused now.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
It's very easy to re-implement the -T feature with the more generic
alpm_find_satisfier rather then the more specific and less useful
alpm_deptest.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
whatprovides and splitdep were removed, so depcmp alone is quite useless
now without splitdep, and deptest is not flexible enough.
Introduce a new alpm_find_satisfier which is hopefully more flexible,
this should make implementation of deptest very easy, and also help alpm
tools such as pactree.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch is only meant for 3.4.x. It prepares the place for the future
epoch-aware release.
All force packages that get reinstalled or upgraded will get an EPOCH
entry in the local database, and thus the new pacman with epoch won't
reinstall them by mistake on the first -Su.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If we have a corrupted database, a package can come through without an arch,
causing the code to blow up when making strcmp() calls. It might even be
possible with perfectly valid database entries lacking an 'arch =' line.
This behavior was seen as at least one of the problems in FS#21668.
Ensure pkgarch is not null before doing anything further.
Signed-off-by: Dan McGee <dan@archlinux.org>
Only occurs if no arguments were provided directly. Arguments can be
separated by any amount of valid whitespace. This allows for piping into
pacman from other programs or from itself, e.g.:
pacman -Qdtq | pacman -Rs
This is better than using xargs, as xargs will not reconnect stdin to
the terminal. The above operation performed using xargs would require
the --noconfirm flag to be passed to pacman.
Signed-off-by: Dave Reisner <d@falconindy.com>
when calling '-S repo/group', only group members in <repo> should should
be installed (group members in other repos are ignored)
Signed-off-by: Dan McGee <dan@archlinux.org>
* FS#19854 (--ignore is ignored with groups)
* http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html
(operation aborts when a package from a group is ignored/and user chooses
not to install it)
If a group member is ignored, we expect
a) a question whether to install
b) after saying 'no' to a), the ignored member not to be installed
c) all other group members to be installed
d) pacman to execute successfully
Signed-off-by: Dan McGee <dan@archlinux.org>
$ pacman -Rd kde-meta
Remove (15): kde-meta-kdewebdev-4.5-1 [0.00 MB] kde-meta-kdeutils-4.5-1 [0.00 MB]
kde-meta-kdetoys-4.5-1 [0.00 MB] kde-meta-kdesdk-4.5-1 [0.00 MB]
kde-meta-kdeplasma-addons-4.5-1 [0.00 MB] kde-meta-kdepim-4.5-1 [0.00 MB]
kde-meta-kdenetwork-4.5-1 [0.00 MB] kde-meta-kdemultimedia-4.5-1 [0.00 MB]
kde-meta-kdegraphics-4.5-1 [0.00 MB] kde-meta-kdegames-4.5-1 [0.00 MB]
kde-meta-kdeedu-4.5-1 [0.00 MB] kde-meta-kdebase-4.5-1 [0.00 MB]
kde-meta-kdeartwork-4.5-1 [0.00 MB] kde-meta-kdeadmin-4.5-1 [0.00 MB]
kde-meta-kdeaccessibility-4.5-1 [0.00 MB]
Total Removed Size: 0.06 MB
Do you want to remove these packages? [Y/n]
( 1/15) removing kde-meta-kdewebdev [------------------------] 100%
$ it stopped here..
On one side, libalpm did not initialize the progress bar at 0 percent.
So with meta-packages that have 0 files, there was only one progress bar
call with percent == 100.
On the other side, pacman callback kept track of the last percent that
it received. When there are only meta-packages, we always received only
100, so pacman believed the progress bar needed not update. Thus only
the first package was actually displayed.
A proper fix for the callback would be to keep track of last package
name to make sure the recorded prev percent applies.
But since we now specify that both Add and Remove should at least send
percent=0 at beginning and percent=100 at the end, there is no need
for that.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We still need to read force entry in epoch-aware pacman, so that when we
install an old force package, EPOCH gets written to the local db.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Populate $cur and $prev with the new bash-completion 1.2 function,
_get_comp_words_by_ref.
_get_cword and _get_pword have been deprecated.
Signed-off-by: Carlos Diaz <839273@gmail.com>
This adds epoch support to pactest, while still producing packages and
database entries the same way makepkg and repo-add currently do in a
backward compatible fashion (still including the 'force' option).
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow it to be a variable in the PKGBUILD as well as propagating it through
to the built package and the package database. We leave some backward
compatibility in place by placing the '%FORCE%' option in the database if
the package contains an epoch; this will be used by older versions of pacman
and more or less ignored by versions that use epoch.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow for better control of what was previously the 'force' option
in a PKGBUILD and transferred into the built package.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unnecessary parsing of fields not found in local desc files.
Leave %FORCE% parsing as this likely will make an appearance in desc
files in the future.
Signed-off-by: Allan McRae <allan@archlinux.org>
The splitname function is a general utility function and so is better
suited to util.h. Rename it to _alpm_splitname to indicate it is an
internal libalpm function as was the case prior to splitting local and
sync db handling.
Signed-off-by: Allan McRae <allan@archlinux.org>
These functions are only needed by be_local and were only promoted
to db.{h,c} as part of the splitting of handling the local and sync
dbs. Move them into be_local.c and make them static again.
Signed-off-by: Allan McRae <allan@archlinux.org>
Clean-up the previous download location of the sync database and
any old extracted sync database directories which are unneeded
with the tar-db backend.
Signed-off-by: Allan McRae <allan@archlinux.org>
Read in list of packages for sync db from tar archive.
Breaks reading in _alpm_sync_db_read and a lot of pactests (which
is expected as they do not handle sync db in archives...).
Signed-off-by: Allan McRae <allan@archlinux.org>
Put the db_operations struct to use and completely split the handling
of the sync and local databases.
Signed-off-by: Allan McRae <allan@archlinux.org>
The file be_files.c is "split" to be_local.c and be_sync.c in order
to achieve separate handling of sync and local databases.
Some basic clean-up of functions that are only of use for local or
sync databases has been performed and some rough function renaming
in duplicated code has been performed to prevent compilation errors.
However, most of the clean-up and final separation of sync and local
db handling occurs in following patches.
Signed-off-by: Allan McRae <allan@archlinux.org>
BASH is defined when you are actually using bash during configure, which
sucks because it ends up being '/bin/sh', messing up all of our scripts.
Change the name of the variable we use in configure, and also ensure we get
a full path to the executable by using AC_PATH_PROGS rather than
AC_CHECK_PROGS. Finally, change the variable name everywhere we use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
These will be needed for the handling of both local and sync database
caches, so put them in a common location.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move splitname, checkdbdir, get_pkgpath into db.{h,c} as these will be
needed to parse both the local and sync databases during the initial
splitting. They will be moved out of db.{h,c} at to more appropriate
locations at a later stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
It doesn't do a whole lot yet, but these type of operations will
potentially be different for the DBs we load.
Signed-off-by: Dan McGee <dan@archlinux.org>
Cache bullshit only has relevance to be_files, so move it there.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: BIG rebase]
Signed-off-by: Allan McRae <allan@archlinux.org>
Hopefully we've finally arrived at package handling nirvana, or at least
this commit will get us a heck of a lot closer. The former method of getting
the depends list for a package was the following:
1. call alpm_pkg_get_depends()
2. this method would check if the package came from the cache
3. if so, ensure our cache level is correct, otherwise call db_load
4. finally return the depends list
Why did this suck? Because getting the depends list from the package
shouldn't care about whether the package was loaded from a file, from the
'package cache', or some other system which we can't even use because the
damn thing is so complicated. It should just return the depends list.
So what does this commit change? It adds a pointer to a struct of function
pointers to every package for all of these 'package operations' as I've
decided to call them (I know, sounds completely straightforward, right?). So
now when we call an alpm_pkg_get-* function, we don't do any of the cache
logic or anything else there- we let the actual backend handle it by
delegating all work to the method at pkg->ops->get_depends.
Now that be_package has achieved equal status with be_files, we can treat
packages from these completely different load points differently. We know a
package loaded from a zip file will have all of its fields populated, so
we can set up all its accessor functions to be direct accessors. On the
other hand, the packages loaded from the local and sync DBs are not always
fully-loaded, so their accessor functions are routed through the same logic
as before.
Net result? More code. However, this code now make it roughly 52 times
easier to open the door to something like a read-only tar.gz database
backend.
Are you still reading? I'm impressed. Looking at the patch will probably be
clearer than this long-winded explanation.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: rebase and adjust]
Signed-off-by: Allan McRae <allan@archlinux.org>
Implement this seemingly simple change in package.h:
typedef enum _pmpkgfrom_t {
- PKG_FROM_CACHE = 1,
- PKG_FROM_FILE
+ PKG_FROM_FILE = 1,
+ PKG_FROM_LOCALDB,
+ PKG_FROM_SYNCDB
} pmpkgfrom_t;
which requires flushing out several assumptions from around the codebase
with regards to usage of the PKG_FROM_CACHE value. Make some changes where
required to allow the switch, and now the correct value should be set (via a
crude hack) depending on whether a package was loaded as an entry in a local
db or a sync db.
This patch underwent some big rebasing from Allan and Dan.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Move almost all of the caching related stuff into a single #define
(which should maybe even just be a static function) so we don't
duplicate logic all over the place. This also makes the code a heck of a
lot shorter and means further changes to this stuff don't have to touch
each and every getter function.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add a .gitignore file
* Use the same 'GEN' output we have in the scripts/ Makefile when doing our
edits on the .in files
* Remove PKGBUILD.vim and vimprojects from our edit list, they have no need
to be in the list
Signed-off-by: Dan McGee <dan@archlinux.org>
In the following, the letters SRUDQ refer to the corresponding pacman
operations.
Most of the work in this commit is about removing as many options as
possible from the global section and moving them to where they actually
belong.
Additionally, --ignore{,group} are added to U and --dbonly is added
to S.
--dbonly added to S
--asdeps moved to S/U/D
--asexplicit moved to S/U/D
--print-format moved to S/U/R
--noprogressbar moved to S/U/R
--noscriptlet moved to S/U/R
--ignorepkg added to U
--ignoregrp added to U
-d moved to S/U/R (--nodeps) and Q (--deps)
-p moved to S/U/R (--print) and Q (--file)
-f moved to S/U
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Split parsing of CLI arguments into separate functions:
parsearg_op (operations)
parsearg_global (global options)
parsearg_{database,query,remove,sync,deptest,upgrade}
Organization strictly follows the manpage (even where the manpage is
incorrect) - these cases will be fixed in the following commits.
Switch cases are copy/pasted and statements unrelated to chosen
operation are deleted.
Parsing logic adjusted as follows:
1) Parse operation
2) If we can bail out early (duplicate op, help/version requested) do so
3) Parse arguments again:
foreach arg:
if arg is operation:
continue
tryparse_args_specific_to_op
if unsuccessful tryparse_args_global
if unsuccessful print error message and exit
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add a bunch of static declarations where possible
* Fix void functions to be proper syntax, e.g. void func(void)
* Consistency fixes (such as argv references)
* Remove dead str_cmp() function from testdb
* Remove unneeded config.h header includes
* vercmp: remove completely unnecessary string copying
Signed-off-by: Dan McGee <dan@archlinux.org>
This applies to contrib/ files, our scripts, and the documentation.
Dan: fix 'make clean' in contrib/ directory.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is needed If we want to use sysconfdir,localstatedir and other variables.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
- Print an error if database entry was not found and delta entry cannot
be added
- More informative line when delta entry is added (oldfile -> newfile)
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows deltas to be generated at repo-add invocation time as opposed to
just added to the database. It will generate the delta from the package
version currently in the database.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We weren't reading this in from our packages, thus causing us not to write
it out to our local database. Adding this now will help ease the upgrade
path for epoch later and not require reinstallation of all force packages.
Signed-off-by: Dan McGee <dan@archlinux.org>
'mknod <file> p' is apparently GNU-only. Looking at coreutils' source
code, It just calls mkfifo.
This one line patch should fix makepkg logging in non-GNU systems.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pacman should catch cases in which the passed arguments don't apply to the
current operation (sync/query/...).
Also see FS#20950.
Signed-off-by: Dan McGee <dan@archlinux.org>
gensync generated a sync.db file with PKGINFO syntax, this is not quite what
pacman expects.
Also the file was only added to the Server path:
root/var/pub/sync/sync.db
but it was not available in the normal sync db path:
root/var/lib/pacman/sync/sync.db
Change gensync() to generate var/lib/pacman/sync/sync.db and then copy it to
var/pub/sync/sync.db (this is used by sync200 -Sy test).
Signed-off-by: Dan McGee <dan@archlinux.org>
We did this check unconditionally, rather than only doing it if we were
actually going to build and run with libfetch. This is safe because we would
have already bailed if libfetch was explicitly requested but not found.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is not a bash builtin, so can potentially cause portability issues.
Additionally, the use of it is completely unnecessary as it can all be done
within bash (and done faster).
$ time pactree xfwm4 >/dev/null (old version)
real 0m3.245s
$ time ./contrib/pactree xfwm4 >/dev/null (new version)
real 0m3.042s
Signed-off-by: Dan McGee <dan@archlinux.org>
On Linux and OS X, we can determine if an entry obtained through a readdir()
call is a directory without also having to stat it. This can save a
significant number of syscalls. The performance increase isn't dramatic, but
it could be on some platforms (e.g. Cygwin) so it shouldn't hurt to use this
unconditionally where supported.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add python-2.7 to the list of checked versions of python and add a
check for a python2 binary before resorting to the unversioned
python binary.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
os.walk(".") adds a prefix of "./" to filenames in python-2.7 which
causes libalpm not to like archives generated in the testsuite resulting
in widespread failure.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents circular symlinks and weird final package locations
when using commands like 'PKGDEST="." makepkg'.
Fixes FS#20922.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Compare paths using bash's "-ef" rather than by string tests as this
takes symlinks into account. This will prevent issues similar to those
in FS#20922 if (e.g.) $PKGDEST is a symlink to $startdir.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The checking of the package for $srcdir references was overly
sensitive and gave a lot of what appear to be false positives with
binary files (in particular with debugging symbols kept).
Restrict the search for $srcdir to non-binary files as this should
still catch the majority of configuration issues the check was
initially designed to catch. Also, add a similar check for $pkgdir.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
For binary packages, the majority of the time used in the debugs symbol
stripping process is the actual stripping of the binaries/libraries and
not the testing of which files to strip. This allows more complete
stripping of packages that install to "non-standard" paths that would
not be generally included in makepkg.conf.
Any performance hit that may be apparent for (_large_) "arch=('any')"
packages can readily be avoided by disabling stripping in the PKGBUILD
options array.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds a check for the minimum mainline GCC version for FORTIFY_SOURCE
support and enables -D_FORTIFY_SOURCE=2 by default when building with
--enable-debug.
Signed-off-by: Allan McRae <allan@archlinux.org>
Not checking the return value of asprintf calls reuslts in a warning
when using -D_FORTIRFY_SOURCE=2. This adds a simple wrapper around
asprintf calls which checks the return value.
Currently the check does nothing more than outputing a message to stderr
on failure, but that is at least an improvement over silent failures.
Signed-off-by: Allan McRae <allan@archlinux.org>
Unfortunately this patch is hard to split up into smaller chunks. Our build
system and the associated automake/autoconf/libtool macros has been left
untouched for a while, and could use a refresher.
* Upgrade ltmain.sh to the latest version
* Move away from a huge acinclude.m4 directory to using individual files in
the m4/ subdirectory, suggested by upstream automake documentation
* Update all macros to their latest available version
* Adjust Makefile.am and autogen.sh to accommodate m4/ subdirectory
Signed-off-by: Dan McGee <dan@archlinux.org>
We had a few files listed in here that we have checked in to our repo, which
doesn't make a whole lot of sense. Also alphabetize the list while we are at
it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently bacman always compresses with gzip now matter what PKGEXT is
set to. Rework the entire package creation process to be similar to
that in makepkg. This also make the explicit assumption that PKGEXT is
defined in makepkg.conf.
Thanks to Nelson Chan <khcha.n.el@gmail.com> for the original patch to
fix the incorrect package compression.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
After a8dcfeccfc, Allan noted that one more regular exprssion inside makepkg
also contained quotes; these should not be there for the same reason as that
commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
These keep having to change because we are getting really good at changing
the downloaded filename. Shorten the match sequences to just .db and .pkg
and trim everything after and including these strings.
Signed-off-by: Dan McGee <dan@archlinux.org>
I don't know what I tested in commit 3e7b90ff69, but it definitely wasn't
working as advertised. Fix the checks in the source code itself to match the
right define (HAVE_LIBFETCH), as well as make sure the configure check
defaults to looking for the library but not bailing if it could not be
found.
Signed-off-by: Dan McGee <dan@archlinux.org>
It touched up these a bit after it ran, so might as well check the changes
in so we don't have to deal with them again later.
Signed-off-by: Dan McGee <dan@archlinux.org>
Model it after the new OpenSSL check, and have it be a bit more useful. If
you do not explicitly pass a command line option, it will be linked if
available but will not error out if it is missing. Also bump the version to
that where connection caching was introduced as we use these new features in
the codebase.
Signed-off-by: Dan McGee <dan@archlinux.org>
I've noticed my Atom-powered laptop is dog-slow when doing integrity checks
on packages, and it turns out our MD5 implementation isn't near as good as
that provided by OpenSSL. Using their routines instead provided anywhere
from a 1.4x up to a 1.8x performance benefit over our built-in MD5 function.
This does not remove the MD5 code from our codebase, but it does enable
linking against OpenSSL to get their much faster implementation if it is
available on whatever platform you are using. At configure-time, we will
default to using it if it is available, but this can be easily changed by
using the `--with-openssl` or `--without-openssl` arguments to configure.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gave at least a 10% improvement on a few tested platforms due to the
reduced number of read calls from files when computing the md5sum. It really
is just a precursor to another patch to come which is to use MD5 functions
that do the job a lot better than anything we can do.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is being checked in as 'pt' rather than 'pt_PT' as that is what
Transifex seems to want, and it is also the dominant choice of packages
already installed on my system when doing a count of the files located in
the /usr/share/locale translation directories.
Thanks for the new translation!
Signed-off-by: Dan McGee <dan@archlinux.org>
A pipe between tar and compression command is used. This improves
performance by running tar and the compression command simultaneously.
Using a pipe also reduces IO by not writing an intermediate tar file
to disk.
Signed-off-by: Juergen Hoetzel <juergen@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#18770, and hopefully an occasional deadlock in my frontend as well.
For simplicity it redirects all scriptlet output through SCRIPTLET_INFO, and
all callbacks in the child process have been replaced for thread-safety.
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Regular expressions in bash should not be quoted. Glad this was in the
documentation and I didn't have to go to #bash to ask...
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds a shell to the fake root set up for pactests, which was not needed
previously due to a bug (debian #582847) in fakechroot.
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org>
If optdepends was defined with empty members, then makepkg would
abort late in the package building process. Detect such cases
in the check_sanity() function.
Fix-provided-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of declaring a new local variable for each loop in the
check_sanity() function, just reuse $i.
Signed-off-by: Allan McRae <allan@archlinux.org>
It is unnecessary to check for a variables existence before
looping over it.
Extracted from patch supplied by Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
"Invalid backup entry" was not a particular helpful error message,
especially when it was due to the file not being in the final package.
Clarify these two messages.
Signed-off-by: Allan McRae <allan@archlinux.org>
Combine changelog and install file creation in create_package().
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Eases maintanence if we need to add further options in the future.
Extracted from a patch supplied by Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The combination of tabs and spaces is annoying in any editor that
does not use a tab width of 2 spaces.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
From the fgets manpage:
fgets() reads in at most one less than size characters from stream and
stores them into the buffer pointed to by s. Reading stops after an EOF
or a newline. If a newline is read, it is stored into the buffer. A
'\0' is stored after the last character in the buffer.
This means there is no need at all to do 'size - 1' math. Remove all of that
and just use sizeof() for simplicity on the buffer we plan on reading into.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow downloads to reuse connections if possible, which could make
big differences on perceived FTP speed as the connection won't have to be
reestablished each time. For the most part, HTTP requests wouldn't be using
keep alive anyway so this won't have an effect there.
I'm not enthused about having to do this with the library initialization,
but there isn't a much better place due to the fact that the loop over
databases occurs on the frontend and not the backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
As noted in FS#20498, if an absolute path is used for specifying the
database when invoking repo-add, the symlink generated will point to the
absolute path instead of being relative to the directory. Fix this for
the two linking cases, but leave the copy untouched so that will still
work.
Signed-off-by: Dan McGee <dan@archlinux.org>
Prevent makepkg aborting whe colors are enabled and the terminal
does not support setting colors by tput.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When performing local testing, it may be useful to add PKGEXT='.pkg.tar'
to the PKGBUILD to save time, especially with big packages.
Signed-off-by: Dan McGee <dan@archlinux.org>
Gettext has this whole 'Plural-Form' thing that until now we haven't taken
advantage of. Given that not all languages have the same plural form rules
as English, take advantage of it by defining a new _n() macro which will
normally define to ngettext(), and adjust a few messages as an example of
how to use.
There are surely other places where we do singular/plural logic without me
having noticed, so further patches are welcome to fix those up too.
Signed-off-by: Dan McGee <dan@archlinux.org>
Avoids letting the shell evaluate ! as something else (e.g. an alias).
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I'm not sure why it doesn't happen everywhere, but we need <sys/stat.h> for
umask and mkdir in this file. I hit this today:
cc1: warnings being treated as errors
util.c: In function ‘makepath’:
util.c:128:2: error: implicit declaration of function ‘umask’
util.c:141:5: error: implicit declaration of function ‘mkdir’
make[2]: *** [util.o] Error 1
Signed-off-by: Dan McGee <dan@archlinux.org>
We no longer use these anywhere outside of sync.c, so do the rename and add
static to their definition to meet our coding standards.
Signed-off-by: Dan McGee <dan@archlinux.org>
As reported in FS#20221, we don't always do the right thing when installing
a group and using the --needed option. This was due to the code pulling
packages based on what was already in the transaction's add list, but
completely ignoring the fact that we may have already seen and skipped this
same package in an earlier repository.
Add a list to the private _alpm_sync_pkg() function that allows us to have
this extra information so we don't mistakenly downgrade a package when using
--needed.
Signed-off-by: Dan McGee <dan@archlinux.org>
The first step for resolving FS#20221. sync023 is the case from the bug
report; sync022 is already working fine but we have no tests at all that
test the --needed option in any form.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes repackaging issues when multiple package names are passed to the
--pkg option.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The sync db should be stored in the sync/ folder. This cleans up
DBPath to only have local/ and sync/ directories in it.
A nice side effect is that the db are now in the right place so we
can implement directly reading from them.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With commit 5dffef78, the repo database always has a symlink
of the form reponame.db. Use that filename and let libarchive
determine the compression type.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Variables that are only meaningful within the function they are declared in are
now prefixed by "local".
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: fix whitespace]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow me to be not quite as lazy in getting website changes out
to the Arch Linux server by making it trivial to get everything packaged up
and working correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes two issues:
1) using "sudo -l" results in excess password asking under certian
configurations. Revert to the pre 3.4 behaviour of always using
sudo if it is installed.
2) Properly escape the command so that that versioned dependencies,
such as "foo>4", do not get treated as output redirection when using
su. This also unifies the generation of the pacman line and its
privilege escalation.
Based on patches supplied by Andres P <aepd87@gmail.com> with minor
adjustments for suitability for the maint branch.
Original-work-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Because the shell gettext doesn't allow for positional gettext substitution,
be more careful about where we use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Prevents compiler warnings when building with -D_FORTIFY_SOURCE=2
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Check that writing to destination file actually occurs in
_alpm_copyfile. Required adding a new error (PM_ERR_WRITE)
as none of the others appeared appropriate.
Prevents compiler warning when using -D_FORTIFY_SOURCE=2.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When makepkg catches a command failure it currently prints "Aborting..."
and exits. Clarify the reason for aborting from packaging is a failure
during one of the PKGBUILDs functions.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The casting of nread is safe as it is tested to be >0 when it is
initally assigned. It is also being implicitly cast in the fwrite
call in the line above.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Attempt to find "du" from coreutils in the standard paths and if
not revert to the version in the users PATH. Using the full path
prevents issues such as FS#19932, where a different and incompatible
version of du is put earlier in the users path.
Signed-off-by: Allan McRae <allan@archlinux.org>
The 'grep -R' in the $srcdir check would not only grep regular files,
but also devices, symlinks (that might potentially point outside of
$pkgdir), pipes and so on. Use find to ensure only regular files are
examined.
This should fix https://bugs.archlinux.org/task/19975
Signed-off-by: Allan McRae <allan@archlinux.org>
We were seeing some issues when trying to create our new database alias
using symlinks on certain filesystems (see FS#19907). Have a fallback method
in place where we first try a symlink, then a hard link, then just copy the
database if all else fails.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 13748ca052 inversed the nature of one test wherein the if clause would
throw a fatal error if a legitimate package function was defined in PKGBUILD.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
To avoid errors with bash 3.2, compopt will be skipped if it's not a
shell builtin.
compopt is needed to not append slashes to package names that
coincide with directories in PWD.
This is currently not possible to fix in bash versions that do not support
compopt, so these users will have to bear that regression.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Running "pacman -T foo" is expected to return a non-zero value when
"foo" is not installed. This sets of the error trap in bash-3.2 but
not bash 4.x. Work around this by disabling the error trap around
this pacman call as we are manually checking the return value anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
If this is to be scripted with AIF or another tool, it needs to respect stderr.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Valid pacman configuration files do not have to start with a hash for that line
to be a comment, neither do directives need to be in column 0.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
$replacedurl was being built from an expansion of itself. But at the time it
happened, it was empty.
Fixes FS#19911
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit 3d67d9b1 introduced multiple bash4 string manipulations.
Revert those in order retain compatibility with bash-3.2 which
is still widely used.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than say we can't find the target after saying "No, I guess I don't
want to install this", we should make sure the ignored status gets passed
all the way through. This fixes FS#19866.
Pactest is also included that failed before due to the fact that we normally
treat an unfound package as a reason to exit with a non-zero status.
Signed-off-by: Dan McGee <dan@archlinux.org>
Follow the HACKING guidelines and always use != 0 or == 0 rather
than negation within conditional statements to improve clarity.
Most of these are !strcmp usages which is the example of what not
to do in the HACKING document.
Signed-off-by: Allan McRae <allan@archlinux.org>
pacman -Qq output is sorted according to the users LC_COLLATE
setting as is needed for comm.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: adjust commit message]
Signed-off-by: Allan McRae <allan@archlinux.org>
Use strcoll to compare package names to provide output sorted
according to a users LC_COLLATE settings.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: added commit message]
Signed-off-by: Allan McRae <allan@archlinux.org>
Ease maintainace; the two parts that have been combined into a function were
identical.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: rename function]
Signed-off-by: Allan McRae <allan@archlinux.org>
Regression caused by c71fe7db. Was checking for "optdepend" and "conflict"
rather than "optdepends" and "conflicts" when populating .PKGINFO.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: adjust commit message]
Signed-off-by: Allan McRae <allan@archlinux.org>
This is a partial revert of commit d44e5099. By making disabling docs the
default, it presents all sorts of problems- namely anyone who builds from a
tarball and isn't careful enough to include '--enable-doc' will get an
install without any manpages at all. Remember that make includes both
'build' and 'install' steps.
The warning introduced by the commit is kept, so we do not lose all its
benefits, but I am not happy to see regressions introduced in packaging and
installing of this piece of software.
Signed-off-by: Dan McGee <dan@archlinux.org>
If the library stripping variables are not defined in makepkg.conf,
libraries will be fully stripped and become broken. Fallback to a
sane default stripping level.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If "file -bizL" does not return a supported type, check if the file is
recognized by bsdtar and if yes extract from it.
Dan: use '-q' option to prevent needing to seek the entire archive.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Instead of specifying the output file on every echo, leave it to the
caller of write_pkginfo to specify the target.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Change all instances of the (test) [ builtin to the [[ keyword.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Rely on type -p's return value instead of a string check.
And gettext was previously being checked with type -t, which was
inconsistent with the rest of the tests pertaining commands that aren't
expected to be functions nor builtins.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
If the library stripping variables are not defined in makepkg.conf,
libraries will be fully stripped and become broken. Fallback to a
sane default stripping level.
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit 5fe41df8 broke `make distcheck` pretty badly for the doc directory.
Looking at what this commit was trying to accomplish, it make sense to
revert a lot of the build system changes and just simplify what we are
showing in the man page anyway- an example, not exactly how it is configured
on your system.
Signed-off-by: Dan McGee <dan@archlinux.org>
This helps out `git shortlog` by mapping our various mismatched authors and
email addresses. The number of authors reported by shortlog goes from 131 to
98 after this commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix the '\t' characters that got introduced by the last update of this
translation that should not have been there.
Signed-off-by: Dan McGee <dan@archlinux.org>
This puts us more in line with other projects that don't attach the country
code to the language code.
$ du -sh /usr/share/locale/nb*/LC_MESSAGES
3.5M /usr/share/locale/nb/LC_MESSAGES
132K /usr/share/locale/nb_NO/LC_MESSAGES
Signed-off-by: Dan McGee <dan@archlinux.org>
This puts us more in line with other projects that don't attach the country
code to the language code.
$ du -sh /usr/share/locale/sv*/LC_MESSAGES
7.2M /usr/share/locale/sv/LC_MESSAGES
60K /usr/share/locale/sv_SE/LC_MESSAGES
Signed-off-by: Dan McGee <dan@archlinux.org>
Source packages were getting created with only links to local source
files. Caused by commit 5cddcc90.
Also, fix dangling symlinks to install and changelog files. Caused
by commit fe1e3471.
Thanks to Christopher Rogers <slaxemulator@gmail.com> for pointing
out areas that were failing.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move the absolute filename detection to a new function to reduce code
duplication.
This patch also fixes the --allsource option that did not include remote
source files if they reside in $startdir instead of $SRCDEST.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
The complete file path of a temporary symlink is really useless
information.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that not everything is in 'pactest/', we can separate out the parts a
bit more and leave the pacman/ directory to be just pactest.
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the test suite to test/pacman in order to make a logical
location for a future makepkg test suite.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The use of "|| return 1" is no longer necessary in PKGBUILDs.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a small step towards allowing pacman to handle databases
with variable compression types.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Merges code in two almost identical chunks in create_srcpackage and
check_sanity.
Also discards the space kept by regex in ae73d75660 and earlier, since
the for loop discards it later on.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that we have the '[installed]' text, update pacsearch to look for it and
highlight it instead of the former '***' prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Undeclared local vars with common enough names to warrant breakage
* Performance issues with _pacman trying to replicate /usr/bin/pacman
with find and other slow tools.
* Performance issues with expanding an array (with sometimes hundreds of
items) over three times.
* Expanding said array to remove already completed entries had the side
effect of braking filenames with spaces and or \n.
* add -D --database options and --print
* fix dirs showing up when they shouldn't in completions
* completions regarding database entries shouldn't trigger filename
completion.
This is now down to 106 lines. The original one (master) is 365 lines
long, yet this one retains all functionality.
The work is documented in FS#16630.
Signed-off-by: Andres P <stderr@mail.com>
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The .INSTALL and .CHANGELOG files in a package retained the permissions
that they had in $startdir. Do a chmod after copying to ensure
that the permissions are sane.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
f569c4a042 wrongly relied on file's output.
The fix is to not decompress files in the first place.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg goes back to the $startdir between the build() and
package() functions so we need to change directory at the
start of the package function.
TODO: fix makepkg to make this unnecessary
Signed-off-by: Allan McRae <allan@archlinux.org>
Extends the use of the --skipinteg option to creating a source
package. Fixes FS#15984.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes the phonon/qt issue, if all to-be-upgraded packages are
explicit targets (ie. only not-yet-installed packages are pulled by
resolvedeps). This condition covers the most common situations, for example
it should hold with every -Su operation.
After this patch sync405.py passes, but sync406.py doesn't.
The work is inspired by the patch of Henning Garus, thanks for his work:
http://mailman.archlinux.org/pipermail/pacman-dev/2010-February/010429.html
(I moved the alpm_list_diff computation to sync.c in order to compute it
only once.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
With this patch, dependencies will be resolved and not silently ignored
when running:
makepkg --nobuild --syncdeps
makepkg --repackage --syncdeps
Also, a warning is displayed when repackaging and dependencies are not
being resolved.
Thank you Allan for the feedback.
Signed-off-by: Nezmer <git@nezmer.info>
[Allan: Only warn when repackaging with a package function]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a complaint that has been reported many many times. By default, docs
are enabled and there is no check for asciidoc, so anyone building from git
will see their build fail.
We cannot do a strict check for asciidoc because released source tarballs
have man pages already built, and it should be possible to install them
without having asciidoc.
This patch attempts to improve the situation in two ways :
1) disable doc by default
2) print a warning if docs are enabled but asciidoc is not installed
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After the previous patch that re-enabled its use outside of sync repository
sections which we had unintentionally disabled.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix a regression of 51f9e5e40a that only allowed Include in repo sections.
Thanks to Marc - A. Dahlhaus for reporting the issue.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit df99495b82 pacman downloaded files from the first repo only,
and reported corrupted packages for all files from other repos.
The download_size was set to 0 for _all_ transaction packages after
downloading some files from the first repo. This code-block was moved to its
correct place.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
As Allan pointed out, this actually ships with pacman (at least with Arch)
and not necessarily with ABS or any other package. Also fix the language
dealing with the prototype install files.
Signed-off-by: Dan McGee <dan@archlinux.org>
Of course, we still have only md5 and sha1 hardcoded here but I resisted the
urge to copy paste for the rest of our supported checksums in hope that
someone knows how to do it a better way.
Signed-off-by: Dan McGee <dan@archlinux.org>
Updated list with :
echo $(pacman -Ql licenses | grep "/usr/share/licenses/common/.*/$" | cut
-d'/' -f6 )
Maybe PKGBUILD.vim could do this at runtime ?
Dan: you forgot the symlinks; readded FDL, GPL, LGPL.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When pacman queries the ownership of an object that is not a path, it will
check in the users PATH for a match. Implements FS#8798.
Dan: did some small refactoring and error message changes when PATH is
searched and nothing is found.
Original-patch-by: Shankar <jatheendra@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The current --skipinteg is a bit weird. It does not skip integrity
checks, but instead does them and prints a warning. Change this
behaviour to actually skipping the checks.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The presence of all install and changelog files (multiple files may
be used with package splitting) is checked for in check_sanity().
All install and changelog files are copied to the source location
when using --source. The check for install and changelog file presence
is removed in create_srcpackage() as this is redundant to the checks
performed in check_sanity().
Moved install and changelog handling in create_srcpackage() to after
source array files, as this is more logical and readily allows for the
following.
A check is made when creating a source package that a symlink to an
install file has not already been added. This can occur if the
install file is used multiple times or if it is listed in the source
array.
Fixes FS#18831, FS#18394 and partially fixes FS#16004
Signed-off-by: Allan McRae <allan@archlinux.org>
Compare a list of packages on the system before and after dependency
resolution in order to get a complete list of packages to remove. This
allows makepkg to remove packages installed due to provides.
Bail in cases where packages that were on the system originally have been
removed as there is a risk of breaking the system when removing the new
packages.
Fixes FS#15144.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had the long option wrong in some places and its behavior wasn't
documented at all with regards to -U/--upgrade.
Signed-off-by: Dan McGee <dan@archlinux.org>
It caught me by surprise that:
1. These weren't being tested at all
2. The --dbonly combined with -U not only "works" but is also completely
undocumented. It also has some weird behavior on install vs. upgrade that
may need addressing.
Add some tests which will hopefully provoke some discussion.
Signed-off-by: Dan McGee <dan@archlinux.org>
In addition, I permuted shortopts to make it more readable.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The request of FS#12950 is implemented.
On the backend side, I introduced a new function, alpm_db_set_pkgreason(),
to modify the install reason of a package in the local database. On the
front-end side, I introduced a new main operation, -D/--database, which has
two options, --asdeps and --asexplicit. I documented this in pacman manual.
I've created two pactests to test -D: database001.py and database002.py.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Don't explicitly add things to the list that might not need to be there, and
get the fallback list of libraries correct.
Signed-off-by: Dan McGee <dan@archlinux.org>
Include the object file directly from the libalpm version comparison code as
it is the only thing we need. This drops the dependency of vercmp on
libalpm and all of the stuff we know it drags in.
Signed-off-by: Dan McGee <dan@archlinux.org>
It isn't really necessary here and it helps us get rid of some link
pollution so we can have a slim vercmp binary.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will facilitate using this object file on its own in the vercmp tool
which will be done in a future commit. The net impact on the generated
binaries should not be noticeable after this commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
File permissions are not guaranteed to stay the same on exit from fakeroot,
so repackaging may result in files with different permissions. This is
avoided when using a package() function (or split packages) as the
packaging step is rerun.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: touched up message for translation purposes]
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes 2 issues I encountered when cross-compiling pacman.
First is the test for libfetch which requires explicit linking to all
libraries libfetch depends on.
The other problem results from the AC_CHECK_PROGS test for git. This
test will stop configure with an error when cross-compiling.
The fix moves the call to AC_CHECK_PROG so that is only called of
--enable-git is actually set.
Signed-off-by: Matthias Lanzinger <mlaenz@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Just as we do in -Qi, we can compute required by information for sync
database packages. The behavior seems sane; for a given package, the -Sii
required by will show all packages in *any* sync database that require it.
Implements FS#16244.
Signed-off-by: Dan McGee <dan@archlinux.org>
Since we were searching for '.pkg.tar.gz' before, we now have started to
show extensions during the download when we have a '.pkg.tar.xz' package.
Just look for '.pkg.tar.' (or '.db.tar.') instead and suppress anything
found from that point on.
Signed-off-by: Dan McGee <dan@archlinux.org>
Basically I'm the idiot that thought I could make it better and completely
forgot how freeing the contents of the original lists would screw up our
nice little diff extraction lists. This caused segfaults among other
problems. Last time I try to do that...
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff627ce26 in strcmp () from /lib/libc.so.6
(gdb) bt
Signed-off-by: Dan McGee <dan@archlinux.org>
Follow-up to the previous "Only extract new DB entries" patch; move the
partial extraction code inside one side of the loop so we can use the same
code for actually doing file extraction.
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#15198. The idea apparently came from Csaba Henk
<csaba-ml <at> creo.hu> which submitted a patch to Frugalware, so thanks to
him, even though I did not look at the code :)
The idea is to only extract folders for new packages into the package
database and clean up the old directories. This is essentially implementing
Xyne's "rebase" script within pacman.
If using -Syy, just remove and extract everything.
If using -Sy :
1. Generate list of directories in DB
2. Generate list of directories in archive
3. Compare both
4. Clean up old directories
5. Extract new directories
Original-work-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: fix compile error, s/int/size_t/]
Signed-off-by: Dan McGee <dan@archlinux.org>
And a new --print-format option to configure the output.
This implements FS#14208
Example usage :
pacman -Sp --print-format "%r/%n-%v : %l [%s]" kdelibs
extra/kdelibs-4.3.2-4 : ftp://mir2.archlinuxfr.org/archlinux/extra/os/i686/kdelibs-4.3.2-4-i686.pkg.tar.gz [0,00]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#17523
We always used a fixed value of 50 for textlen, which is often not enough
for download progress bar. At least we can use a bigger width on large
terminal (e.g. 60% of width) and keep 50 as minimum.
before:
nautilus-2.28.4-1-x... 5.7M 789.2K/s 00:00:07 [####################################] 100%
after:
nautilus-2.28.4-1-x86_64 5.7M 770.7K/s 00:00:08 [##############################] 100%
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
1 - Explain magic numbers
2 - There was a weird off by 1 mess in the progress bar. The code supposedly
shared the width between 50 chars for text (textlen) and the rest for the
progress bar (proglen = getcols() - textlen).
But the code actually used textlen + 1 for the text and proglen - 1 for the
progress bar (with haslen=1, the progress bar was actually empty), which was
a bit confusing so I changed it.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When a man page has both symbolic and hard links, any symlink pointing
to other than the alphabetically first hardlink was not "compressed"
and left dangling towards the uncompressed man page. Fixes FS#18569.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The newly added variables STRIP_BINARIES, STRIP_SHARED and STRIP_STATIC,
that are set in makepkg.conf, specify the strip options used on binaries
and shared and static libraries.
In addition, files are now stripped more aggressively by default.
Implements FS#13592 the way it was suggested by Allan in the comments.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
It was noted in FS#17533 that setgid bits are carried down into any created
subdirectories, and thus could end up being in a built package if the
original package directory was marked g+s. When we create src/ and pkg/,
explicitly chmod them to remove any sticky bits.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When PKGDEST pointed to a non-writable location, makepkg would fail
after completing the build process. This patch makes it abort as
soon as PKGDEST is parsed.
Also, move the SRCDEST check to the same point rather than right
before downloading sources (which was after dependency checks).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The location of the used utilities may and does differ between various
distributions and therefore absolute paths do not work well. Since the
main purpose of its introduction was to avoid side-effects caused by
aliases, it is sufficient to disable possible aliases temporarily by
preceding the commands with a backslash.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
When using --downloadonly the "Total Installed Size" message is not
needed and perhaps misleading.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The "local database is up to date" message has been replaced with "there
is nothing to do" message. This used with "empty" -S, -R, -U operations too.
(Examples: pacman -S ignored_pkg, pacman -Ru needed_pkg.)
See FS#17859.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The source command triggers / might trigger the ERR trap which makes
makepkg abort right after a successful installation of missing
dependencies.
Thanks to Xavier Chantry <shiningxc@gmail.com> for finding this
solution.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 77e84bea71)
Signed-off-by: Dan McGee <dan@archlinux.org>
We free'd the handle but didn't NULL out the global variable, leading to
problems if you try to reinitialize the library. Make sure we clean up after
ourselves.
Signed-off-by: Dan McGee <dan@archlinux.org>
Introduce $SRCPKGDEST to define a destination dir for source packages
instead of saving them in $PKGDEST with binary packages.
The simple patch doesn't break old behavior.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
pkgbase is used in the following rm calls, and since pkgname can be
present when pkgbase is not, it is safer to check for pkgbase.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When makepkg exits in create_srcpackage(), the (temporary) srclinks
directory is left behind.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, "makepkg -R" creates a package with a wrong updated $pkgver.
Signed-off-by: Nezmer <Nezmer@allurelinux.org>
[Allan: adjusted comment]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is particularly useful when using pacman wrappers which call sudo
by themselves and therefore should not be run as root.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If PACMAN environment variable is set, makepkg will try to use this
command to check for installed dependencies and to install or remove
packages. Otherwise, makepkg will fall back to pacman.
Implements FS#13028.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: move envvar section in manpage]
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a check that the package does not contain references to the
folder it was built in.
Fixes FS#14751
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
download_internal is supposed to always set pm_errno but did not in many
cases.
The most important (and tested) change is the one concerning fetchStat. This
is typically where the code will fail when the network is down for example.
Before commit d2dbb04a9a, this fetchStat call did not exist and the
same kind of errors would be encountered in the fetchXGet call that follows.
I just copied the error printing to restore the old behavior.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
getopt should already ensure that optarg is not NULL when an argument is
required, but just be extra safe and double check it before using optarg.
To be honest, I only did that to make clang shut up and eliminate the last
warnings it reported.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function was quite huge (~230 lines) and difficult to parse, now it is
slightly better.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Some users reported duplicated database entries in /var/lib/pacman/local/,
for example, both foo-1.0-1 and foo-2.0-1 subdirectories existed. (Bogus
3rd-party scripts, backup?) In this case pacman reported no error and its
behaviour was mysterious.
From now on, pacman detects this situation and prints an error message.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This ensures we never have trailing whitespace. Take the following text,
with line numbers added for clarity:
1. Title : item1 item2 item3 item4
2. item5 item6 item7 item8
3. item9 itemA itemB itemC
Laszlo Papp helpfully pointed out we would have two trailing spaces on line
three after the last item. However, we also had these trailing spaces on
lines one and two, which the initial patch didn't take care of. This can be
seen on something like `pacman -Qi glibc`.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit embarrassing. For example:
$ pacman -Qi mesa
...
Required By : mesa mesa mesa mesa mesa mesa
Something is clearly not right, and the problem was introduced in commit
0bc961. Fix the issue by getting the package name off the correct variable.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows makepkg to only build a specified subset of packages
from a split PKGBUILD. This is very useful in combination with the
-R flag or when bumping the pkgrel of a single package.
Fixes FS#15956.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When PKGDEST is used, symlinks to the packages will be put in the build
directory. This combines the convenience of a global package cache with
the ease of having a package (i.e. a symlink) in the build directory for
testing and installation purpose.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
[Allan: add comment documenting clean-up addition]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Sorry for this being such a huge patch, but I believe it is necessary for
quite a few reasons which I will attempt to explain herein. I've been
mulling this over for a while, but wasn't super happy with making the
download interface more complex. Instead, if we carefully order things in
the internal download code, we can actually make the interface simpler.
1. FS#15657 - This involves `name.db.tar.gz.part` files being left around the
filesystem, and then causing all sorts of issues when someone attempts to
rerun the operation they canceled. We need to ensure that if we resume a
download, we are resuming it on exactly the same file; if we cannot be
almost postive of that then we need to start over.
2. http://www.mail-archive.com/pacman-dev@archlinux.org/msg03536.html - Here
we have a lighttpd bug to ruin the day. If we send both a Range: header and
If-Modified-Since: header across the wire in a GET request, lighttpd doesn't
do what we want in several cases. If the file hadn't been modified, it
returns a '304 Not Modified' instead of a '206 Partial Content'. We need to
do a stat (e.g. HEAD in HTTP terms) operation here, and the proceed
accordingly based off the values we get back from it.
3. The mtime stuff was rather ugly, and relied on the called function to
write back to a passed in reference, which isn't the greatest. Instead, use
the power of the filesystem to contain this info. Every file downloaded
internally is now carefully timestamped with the remote file time. This
should allow the resume logic to work. In order to guarantee this, we need
to implement a signal handler that catches interrupts, notifies the running
code, and causes it to set the mtimes on the file. It then rethrows the
signal so the pacman signal handler (or any frontend) works as expected.
4. We did a lot of funky stuff in trying to track the DB last modified time.
It is a lot easier to just keep the downloaded DB file around and track the
time on that rather than in a funky dot file. It also kills a lot of code.
5. For GPG verification of the databases down the road, we are going to need
the DB file around for at least a short bit of time anyway, so this gets us
closer to that.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Xav: fixed printf with off_t]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
* It makes the code clearer to read/understand
* Cppcheck tool doesn't show this anymore: [./util.c:215]: (error) Resource leak: fd
[Dan: don't change the coding style]
Signed-off-by: Dan McGee <dan@archlinux.org>
For some packages, generally the 'any' arch ones, a build step is not
required and therefore can be skipped. In these cases, a package()
function without a build() one is sufficient.
As a side effect, this commit makes meta packages without any function
at all in the PKGBUILD possible.
Fixes FS#15147.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Since commit fb97d32, which brought in this test, support for split
PKGBUILDs was added, and therefore, all values of pkgname and also
pkgbase have to be checked now.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg looks for a package() function when building a single package
but package_$pkgname() style package functions when building a split
package. This patch allows the use of a package_$pkgname() function
when building a single package for consistency. This is achieved by
having makepkg consider a non-split package with a package_$pkgname()
function as a split package (creating just the one package).
Fixes FS#16622.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* FS#16623, second half of makepkg
* Includes stuff like -o to ||, -a to &&, etc.
* if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps
Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* FS#16623, first half of makepkg
* Includes stuff like -o to ||, -a to &&, etc.
* if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps
Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com>
[Dan: made commit message useful]
Signed-off-by: Dan McGee <dan@archlinux.org>
FS#16623 suggested this change for makepkg; this patch applies it to the
remaining files in the scripts directory.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
The source command triggers / might trigger the ERR trap which makes
makepkg abort right after a successful installation of missing
dependencies.
Thanks to Xavier Chantry <shiningxc@gmail.com> for finding this
solution.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#16871 and makes the pkgdesc workaround obsolete.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Thanks to Laszlo Papp <djszapi@archlinux.us> for the following catch:
opendir(path)) == (DIR *)-1;
is maybe the result of misunderstanding the manpage. If an opendir() call
isn't successful it returns NULL rather than '(DIR *)-1'.
Noticed-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently makepkg takes the commandline arguments, assigns them to a
variable and passes that variable to the next makepkg call (within
fakeroot).
Use a comination of quotes and arrays in this process to ensure any
arguments passed within quotes and containing spaces stay as a single
argument during the second makepkg call.
Thanks to Dan for figuring out how to get this working.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_pkg_get_name() gives us little benefit in backend code besides a NULL
check on the package passed in; we could do that ourself if necessary. By
changing to direct references in the cases where we are sure we have a valid
package, we save a function call each time we need a package name. This
function can't be inlined because it is externally accessible.
This cuts the calls to get_name() from 1.3 million times in a
pacman -Qu operation to around 2400.
Signed-off-by: Dan McGee <dan@archlinux.org>
In doing so, it is possible to get rid of all the tests for colored
messages except for one global one.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
pkgbase is used in the following rm calls, and since pkgname can be
present when pkgbase is not, it is safer to check for pkgbase.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit c7e4d10d introduced a small error in the testing of whether
a package is already built.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows building a mixture of binary and arch=any packages.
Fixes FS#15955.
The value of CARCH is no longer overridden to "any" in when arch=any
is used and the assigning of the "any" arch is delayed to during the
packaging stage. Adjustments were required to fix installing and
checking for pre-built packages of varing arches.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixing a single package within a split package requires the overriding
or pkgrel. In very rare (but existing) cases, it is useful to
override pkgver. Partial fix for FS#15955.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes the following valgrind warning :
==26831== Syscall param rt_sigaction(act->sa_flags) points to uninitialised
byte(s)
==26831== at 0x4282547: __libc_sigaction (in /lib/libc-2.10.1.so)
==26831== by 0x403C693: download_internal (dload.c:152)
==26831== by 0x403D0E4: _alpm_download_single_file (dload.c:311)
==26831== by 0x4033B72: alpm_db_update (be_files.c:319)
==26831== by 0x805205E: pacman_sync (sync.c:257)
==26831== by 0x804EE54: main (pacman.c:1120)
==26831== Address 0xbec6cc04 is on thread 1's stack
==26831==
==26831== Syscall param rt_sigaction(act->sa_restorer) points to
uninitialised byte(s)
==26831== at 0x4282547: __libc_sigaction (in /lib/libc-2.10.1.so)
==26831== by 0x403C693: download_internal (dload.c:152)
==26831== by 0x403D0E4: _alpm_download_single_file (dload.c:311)
==26831== by 0x4033B72: alpm_db_update (be_files.c:319)
==26831== by 0x805205E: pacman_sync (sync.c:257)
==26831== by 0x804EE54: main (pacman.c:1120)
==26831== Address 0xbec6cc08 is on thread 1's stack
==26831==
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This also removes the awk dependency from makepkg and repo-add.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pacman's fgets function in the API used hardcoded numbers to identify the size.
This is not good practice, so replace them with sizeof handling.
Signed-off-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pacman's long option parsing used hardcoded numbers to identify them.
This is not good practice, so replace them with enumeration constants.
Signed-off-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, a changelog is added to a package if a specific file with a
hardcoded name exists in the PKGBUILD's directory. This approach is not
pretty and also inconsistent with the handling of install files, but it
works.
With the introduction of split PKGBUILDs, however, a drawback in this
old behavior has arisen: you only have the possibility to include one
specific changelog file in either every package defined in the PKGBUILD
or in none.
The use of an additional variable, `changelog`, works around this issue
and makes it possible to include a changelog in only some of the
packages, and besides, each package of the PKGBUILD can have its own
changelog file.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This offers a cleaner way to deal with constant in enum and allow easy
maintainance
Signed-off-by: solsTiCe d'Hiver <solstice.dhiver@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When redirecting both stderr and stdout and using the 2>&1 construct,
you have to redirect stdout first. Otherwise stderr will be redirected to
the 'old' stdout and not to the new resource.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
If the -d switch was invoked with -S (or -U), the removes list was simply
lost, because trans->remove was computed in an
"if(!(trans->flags & PM_TRANS_FLAG_NODEPS))" block.
I've added a new pactest file, sync045.py (derived from sync043.py) to test
this.
Additionally, I did some other minor cleanups in sync_prepare:
* preferred list is not needed anymore
* I removed a needless alpm_list_remove_dupes line (the target list should
not contain dupes at all)
* I moved alpm_list_free(remove); to cleanup part to eliminate a possible
memleak
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more efficient than alpm_list_diff since it assumes the two lists
are sorted. And also we get the two sides of the diff.
Even sorting should more efficient than the current list_diff. Sorting the
two lists should be O(n*log(n)+m*log(m)) while the current list_diff is
O(n*m). So I also reimplemented list_diff using list_diff_sorted.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
update download -> fetch
This just meant that we used XferCommand even if internal download was
available, no big deal.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This removes python optdepends in pacman package
This bash clone is a courtesy of
Matthew Bruenig <matthewbruenig@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
We don't need to count the number of packages left once per file when
removing; we only need to do it once per package. Also move a variable into
the correct scope.
Signed-off-by: Dan McGee <dan@archlinux.org>
After our recent screwup with size_t and ssize_t in the download code, I
found the `-Wsign-conversion` flag to GCC to see if we were doing anything
else boneheaded. I didn't find anything quite as bad, but we did have some
goofups- most of our public unsigned methods would return -1 on error, which
is a bit odd in an unsigned context.
Signed-off-by: Dan McGee <dan@archlinux.org>
A NULL list element triggered an infinite loop. Not cool :)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When a SyncFirst transaction kicks in, no flags like '--force' are honored.
This is for good reason, as honoring something like '--asdeps' could be
quite unintentional. Document this fact and a possible workaround.
Signed-off-by: Dan McGee <dan@archlinux.org>
fetchIO_read returns -1 in case of error, and the return type is
ssize_t, not size_t ! So we converted -1 to an unsigned, which led to
huge file write.
The rest is just changing the error return a bit.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
-f/--force has been dead for a while, so kill it off. In addition, the
check for > 2 args is pretty useless when you do something like:
repo-add -q -q
or a more legit:
repo-add -q /path/to/mine.db.tar.gz
So instead make repo-add just return 1 when it doesn't do anything with
the database which seems to make more sense.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than creating no database at all, create an empty zipped tar archive
in its place. This keeps the download side of repositories a bit more sane
as a DB will always exist, and pacman handles this empty case just fine.
For this to be fully transparent, we also need to make sure repo-add and
repo-remove accept an empty "DB" as an argument, which in reality is a
completely void of files .tar.{gz,bz2,xz} archive.
Signed-off-by: Dan McGee <dan@archlinux.org>
If the package we were adding was a symlink, we stuck the symlink size in
the database rather than the size of the file it referred to. Whoops!
Signed-off-by: Dan McGee <dan@archlinux.org>
Various tidying to the usage output
- change "--config <config>" to "--config <file>" to prevent wrapping in a 80 character wide terminal
- re-alphabetise options, including moving all long only opts to the end
- use same indentation for additional pacman options
- remove useless comment
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Yes, it was that bad :P
We still have memleaks left because we cannot free the error data returned
by libalpm, but pacman has the same issue.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Get them a bit more standardized across the board, as they were quite a
mess. Also note the two new translations we received for 3.3.1.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is for 3.3.0, not for 3.3.1. But since there are only like 10 messages
missing, it seems worth including now.
Signed-off-by: Christian Larsson <congacx@gmail.com>
Signed-off-by: Laszlo Papp <djszapi2@archlinux.us>
[Dan: fix some busted translation strings]
Signed-off-by: Dan McGee <dan@archlinux.org>
Previously we only looked at the first cache directory returned by the
library. This allows us to look at all cache directories for cleaning.
In addition, change the way we do a full (-Scc) cache cleaning operation.
Instead of removing the parent directory, remove each package one-by-one as
in the -Sc case. This would be ideal for someone mounting a cache directory
over NFS, as it ensures we don't wipe out the mountpoint from underneath the
directory.
Signed-off-by: Dan McGee <dan@archlinux.org>
We didn't look at the return status of sync_cleandb() in sync_cleandb_all().
Make it do so and return it up the call chain.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 34e1413d75 attempted to implement lazy loading of package databases.
Although it took care of my main complaint (creating the database directory
if it didn't exist), it didn't allow sync repos to be registered before
alpm_option_set_dbpath() had been called.
With this patch, we no longer compute the individual repository DB paths
until necessary, allowing full lazy loading to work as intended, and
allowing us to drop the extra setlibpath() calls from the frontend. This
allows the changes introduced in a2cd48960 (but later reverted) to be added
back in again.
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 0da96abc, pacman always asks user confirmation for -U, so it is
more coherent to doing that for -R, too.
Btw, most users use -Rs always, so they won't notice any change. In the old
code the -Ru operation was forgotten: Though it is a not "dangerous" operation,
but the target list can be changed by that, too.
Non-interactive scripts should always use --noconfirm (unexpected questions can
be asked by all transactions). [That's why we should always default to the
safest answers.]
I've also added a pkglist != NULL sanity check (because -Ru can empty target
list in trans_prepare part).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
It was probably a bad idea to modify the target directly in case of
repo/pkg syntax.
Duplicating it also allows us to keep the original target string, which
is more informative when printing errors.
Also remove a duplicated error message from libalpm, and improve the
message already returned to the frontend.
$ pacman -S foo/bar
before
error: repository 'foo' not found
error: 'bar': no such repository
after
error: 'foo/bar': could not find repository for target
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
./src/pacman/package.c:
- small typo fix
./src/pacman/pacman.c:
- strdup is changed to strndup, because it's safer like in
case of config option
Signed-off-by: Laszlo Papp <djszapi2@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add more untranslated strings, improve consistency, etc.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 774c252 the --debug output shows 5-6 "syntax error..." lines
for each package. After this patch pacman recognizes makepkgopt as a valid
key, but doesn't do anything.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This doesn't quite work, as can be seen by the pactest results:
Total = 179
Pass = 108 ( 60.34%)
Expected Fail = 5 ( 2.79%)
Unexpected Pass = 0 ( 0.00%)
Fail = 66 ( 36.87%)
If you peek inside '_alpm_db_new' when it gets called for the sync
databases, the base dbpath is still at the default value, causing things
like pactest to fail miserably. We need some further work to do fully lazy
loading, and that belongs on master, not maint.
This reverts commit a2cd48960e.
Signed-off-by: Dan McGee <dan@archlinux.org>
-int alpm_trans_sysupgrade(int enable_downgrade);
-int alpm_trans_sync(char *target);
-int alpm_trans_add(char *target);
-int alpm_trans_remove(char *target);
+int alpm_sync_sysupgrade(int enable_downgrade);
+int alpm_sync_target(char *target);
+int alpm_sync_dbtarget(char *db, char *target);
+int alpm_add_target(char *target);
+int alpm_remove_target(char *target);
* functions renaming
* add new sync_dbtarget which allows to specify the db
* repo/ syntax handling is moved to frontend
( should implement FS#15141)
* group handling is moved to backend
( see http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html )
With the help of --ask switch it is possible to test remove_unresolvable
feature, so I reverted the change of commit f2061c5f on ignore005.py with
--ask=32 added.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This basically started with this change :
/* Transaction */
struct __pmtrans_t {
- pmtranstype_t type;
pmtransflag_t flags;
pmtransstate_t state;
- alpm_list_t *packages; /* list of (pmpkg_t *) */
+ alpm_list_t *add; /* list of (pmpkg_t *) */
+ alpm_list_t *remove; /* list of (pmpkg_t *) */
And then I have to modify all the code accordingly.
This patch utilizes the power of sync.c to fix FS#3492 and FS#5798.
Now an upgrade transaction is just a sync transaction internally (in alpm),
so all sync features are available with -U as well:
* conflict resolving
* sync dependencies from sync repos
* remove unresolvable targets
See http://www.archlinux.org/pipermail/pacman-dev/2009-June/008725.html
for the concept.
We use "mixed" target list, where PKG_FROM_FILE origin indicates local
package file, PKG_FROM_CACHE indicates sync package. The front-end can add
only one type of packages (depending on transaction type) atm, but if alpm
resolves dependencies for -U, we may get a real mixed trans->packages list.
_alpm_pkg_free_trans() was modified so that it can handle both target types
_alpm_add_prepare() was removed, we use _alpm_sync_prepare() instead
_alpm_add_commit() was renamed to _alpm_upgrade_targets()
sync.c (and deps.c) was modified slightly to handle mixed target lists,
the modifications are straightforward. There is one notable change here: We
don't create new upgrade trans in sync.c, we replace the pkgcache entries
with the loaded package files in the target list (this is a bit hackish) and
call _alpm_upgrade_targets(). This implies a TODO (pkg->origin_data.db is
not accessible anymore), but it doesn't hurt anything with pacman front-end,
so it will be fixed later (otherwise this patch would be huge).
I updated the documentation of -U and I added a new pactest, upgrade090.py,
to test the syncdeps feature of -U.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
When a conflict is detected, pacman asks if the user wants to remove
the conflicting package. In many cases this is a bad idea. e.g.
udev conflicts with initscripts (initscripts<2009.07).
Remove initscripts [Y/n]
This changes the query to [y/N].
The --noconfirm behavior has been also changed, because it chooses the
default answer. Since the yes answer is more interesting in our pactests
dealing with conflicts, I inserted '--ask=4' to all of them with one
exception: sync042.py tests the no answer.
(I also fixed a typo in sync043.py)
Original-work-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
This re-implements the --ask option which was removed in commit
1ff8e7f364.
This option does not have to be exposed to the user (help,doc,etc), but is
very very useful for pactest if we want to have more coverage there.
This was rewritten in a smarter way, without code duplication. And with a
different behavior : this option is now only used to inverse default
behavior to questions.
We still use bit operations based on the following struct :
/* Transaction Conversations (ie, questions) */
typedef enum _pmtransconv_t {
PM_TRANS_CONV_INSTALL_IGNOREPKG = 0x01,
PM_TRANS_CONV_REPLACE_PKG = 0x02,
PM_TRANS_CONV_CONFLICT_PKG = 0x04,
PM_TRANS_CONV_CORRUPTED_PKG = 0x08,
PM_TRANS_CONV_LOCAL_NEWER = 0x10,
PM_TRANS_CONV_REMOVE_PKGS = 0x20,
} pmtransconv_t;
for each conv matched, the default answer is inversed.
--ask 0 : all default answers are preserved
--ask 4 : only conflict question is inversed
--ask 63 : all questions are inversed (63 == 1+2+4+8+16+32)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Sometimes "foo conflicts with bar" information is not enough, see this
thread: http://bbs.archlinux.org/viewtopic.php?id=77647. That's why I added
a new reason field to our pmconflict_t struct that stores the packager-
defined conflict that induced the fact that package1 conflicts with
package2.
I modified the front-end (in callback.c, sync.c, upgrade.c) to print this
new information as well.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
The main reason for this change is that scripts could not catch the removed
targets with -S --noconfirm (the return value was 0). So the effect of a
pacman command may have differed from the expected one. Moreover, for my
taste the default no answer is better (I wanted to install the specified
targets, not a subset of them).
I had to change some pactest files as well, because now the default behavior
is not to remove unresolvable targets. In fact, the only pactest file that
tested this feature was ignore005.py.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#15581
'-Su foo' should be more or less equivalent do '-Su ; -S foo'
Note : I moved a block of code to a new process_target function
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Lazy opening of databases is supported since 34e1413d75.
We don't need that setlibpath call each time we register a database.
Besides this caused a memleak in case setlibpath failed, because setlibpath
exit directly and we did not do the cleanup part (section string was not
freed, and a file descriptor remained open).
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
this operation was re-implemented using static strings, instead of using the
existing strreplace function
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
See FS#15984
After commit 02acf65, the --source behavior changed.
Thanks to Dan for actually writing the new sentence :)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
only allow optdepends like:
pkgname: description
some (real) examples of invalid optdepends:
'tcl, python and/or ruby: to use corresponding binding'
'xorg-fonts-75dpi : X bitmap fonts needed for the interface'
'ruby-htmlentities (AUR): for one provider named Deastore'
'xpdf - for pdf'
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Allan: rebase off de39a1f6 and adjust man page]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
For example when we are not in a tty, there is no point in wrapping the
output. This actually makes the job harder for scripts.
$ pacman -Si binutils | grep Desc
Description : A set of programs to assemble and manipulate binary and
The description was cut because the rest was on the following line.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: use printf everywhere]
Signed-off-by: Dan McGee <dan@archlinux.org>
Set the ERR trap to abort upon encountering an error during the execution
of a build or package function.
Activate set -E, which lets functions inherit the ERR trap.
Signed-off-by: Henning Garus <henning.garus@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
similarly to the $repo variable, Server can now contain $arch, which will be
automatically replaced by the appropriate architecture.
This allows us to have one universal mirrorlist file, for both i686 and x86_64,
woohoo!
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Make bunzip2/xz/gunzip decompressing to stdout, because gzip does not offer
something like a -k option.
The selection of the decompression command for gzip/bzip2/xz compressed
files now also depends on the file suffix, since we need to strip the
extensions to get the output filename.
Thanks to Cedric Staniewski <cedric@gmx.ca> for reporting this issue and
contributing patches.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 6f97842 started using libfetch's conditional GET. This requires
libfetch to be version 2.21 or greater.
Change configure.ac to check for the existence of the last_modified field in
the url struct, which was introduced with libfetch 2.21.
Signed-off-by: Henning Garus <henning.garus@gmail.com>
[Xav : moved AC_CHECK_MEMBER outside of AC_CHECK_LIB]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Implements FS#15830
This option allows to build a PKGBUILD with no checksums
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
- fix one memleak if get_filename failed
- cleanup according to Joerg's feedback:
"url_for_string: If fetchParseURL returned successful, you should always
have a scheme set. The logic for anonftp should only be needed for very
broken server -- do you know of any such?
download_internal:
Specifying 'p' is now a nop -- it is tried by default first with
fall-back to active FTP."
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: remove from pacman.conf and pacman.conf.5]
Signed-off-by: Dan McGee <dan@archlinux.org>
libfetch supports checking mtime so we do not need to do it manually.
when the databases are already up-to-date, initiating a connection with
fetchXGet and closing it right after with fetchIO_close took a very long
time (up to 10min!) on some network.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit d7675e393f)
after commit 8feccaed78, -g was no longer added with
--enable-debug.
So if CFLAGS was set (if unset, it defaults to -g -O2) and didn't contain
-g, we ended with no debug symbols..
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
For example, if no package is outdated, -Qu will return 1.
This implements FS#15938
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had 10000 as our timeout value, assuming it was expressed in ms. This is
false after looking at the current code, so reset it back to 10 seconds.
Addresses FS#15369.
Signed-off-by: Dan McGee <dan@archlinux.org>
Skip the SyncFirst dialog, if all the -S packages are SyncFirst packages.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I assume the loop was never iterated more than once, because the write
location was not updated at each loop iteration (buffer instead of buffer +
nwritten), yet we never had reports of corrupted download.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
All other "dep" functions (check_deps, resolve_deps, remove_deps)
have underscores separating words.
Being consistent, convert handledeps to handle_deps.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
libfetch supports checking mtime so we do not need to do it manually.
when the databases are already up-to-date, initiating a connection with
fetchXGet and closing it right after with fetchIO_close took a very long
time (up to 10min!) on some network.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 01f9ae63 moved that creation of the PKGINFO file to before changing
to pkgdir. This causes issues when using the -R option (FS#15851).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If /sbin is not in the PATH and sudo is used, ldconfig cannot be found. So
use /sbin/ldconfig instead. The code checked for the existence of
/sbin/ldconfig anyway..
Signed-off-by: Marc - A. Dahlhaus <mad@wol.de>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 30c4d53ce5, get_destfile and
get_tempfile are only used for internal download, so move these two
functions inside the ifdef
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
'make distcheck' had issues with this one and reformatted it. In addition,
it found a fuzzy message which is now fixed due to an inadvertent msgid
edit.
Signed-off-by: Dan McGee <dan@archlinux.org>
1. API changes between 3.2 and 3.3 section has been added.
2. Corrections on alpm_option documentation.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commandline arguments starting with a hyphen are usually recognized as
options by unix tools. Therefore, allowing hyphens at the beginning of a
package name requires a different handling of pkgnames as suggested by
rm's manpage.
It would be possible to make the scripts 'hyphen-safe', but
hyphen-prefixed packages will cause trouble for pacman users which do
not know these tricks.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
[Dan: remove the repo-add check]
Signed-off-by: Dan McGee <dan@archlinux.org>
As reported in FS#15210, we have some problems with split packages and
variable overrides because of this patch. For now, in prep for a release, it
is best to back it out and see what we can do later.
This reverts commit 621aa26e26.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes: FS#15675 - pacman can not determine ownership of dangling
symlinks
Using lstat seems more correct than stat for the -Qo operation anyway.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows a frontend to define its own download algorithm so that the
libfetch dependency can be omitted without using an external process.
The callback will be used when if it is defined, otherwise the old
behavior applies.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
[Dan: minor cleanups]
Signed-off-by: Dan McGee <dan@archlinux.org>
If the user switches from unstable repo to a stable one, it is quite hard to
sync its system with the new repo (the user will see many "Local is newer
than stable" messages, nothing more). That's why I introduced -Suu, which
treats a sync package like an upgrade, iff the package version doesn't match
with the local one's.
I added a new pactest (sync104.py) to test this, and I updated the
documentation of -Su.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: slight doc reword]
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#13877. Add a new option "-Qk" which checks if all of the
files for a given package (or packages) are really on the system (i.e. not
accidentally deleted). This can be combined with filters and other display
options. It also respects both the --quiet and --verbose flags to give
varying levels of output.
Based on the original patch by Charly Coste <changaco@laposte.net>, thanks
for your work!
Signed-off-by: Dan McGee <dan@archlinux.org>
With split packages, the pkgbase variable provides a useful way to
find out which packages were build from the same PKGBUILD. Add it
to the packages .PKGINFO file and the repo database only when
package splitting is used.
Original-patch-by: Pierre Schmitz <pierre@archlinux.de>
[Allan: restrict to including only with spilt packages
and include after pkgname]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This happens for example if you install a new package, and one of its
backup config file is already on the file system.
If the local file was different, it was saved to .pacorig which is fine.
However if the local file and pkg file were the same, the pkg file
(temporarily extracted as .paccheck) was left on the system.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#15546
Also fix the interface of unlink_file which was really stupid..
(alpm_list_t used with only one element)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
A package can now replace symdir->dir by dir without fileconflicts.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When one package wants to replace a directory by a file, we check that all
files in that directory were owned by that package.
Additionally pacman can be more verbose when the extraction of the symlink
(or file) fails. The patch to add.c looks more complex than it is, I just
moved and reindented code to handle cases 10 and 11 together.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
check that the file exists first, otherwise pactest just breaks.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#15294.
The code to run a command inside a chroot was refactored from the
_alpm_runscriptlet function to _alpm_run_chroot.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
FS#15448 (which is made worse by the "fix" for FS#14727...), highlighted
some deficiencies in the usage of the BUILDSCRIPT variable. In particular,
only relative paths worked with "-p" and some output was very strange in
combination with the "-p" flag or reading from /dev/stdin. e.g.
"Please add a license line to your /dev/stdin!".
This patch adds a new variable, BUILDFILE, which contains the full path
to the BUILDSCRIPT. This defaults to $startdir/$BUILDSCRIPT.
Also, fix a missed quoting of $BUILD{SCRIPT->FILE} and remove warning
about missing BUILDSCRIPT definition in makepkg.conf as the default
BUILDSCRIPT value is now specified during configure. Add check that
BUILDFILE is writable before updating VCS PKGBUILDs. When making a source
package, the BUILDSCRIPT always gets given the default name, regardless
of what it was originally called.
Signed-off-by: Allan McRae <allan@archlinux.org>
Ensure we don't pass a bare filename to printf that might contain a
lookalike '%' escape sequence. Fixes part of FS#15323.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We currently fall apart on files with spaces in the names.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Makes sure the required package functions are present when using package
splitting. Also moves setting of pkgbase variable outside the
check_sanity function to somewhere more appropriate.
Signed-off-by: Allan McRae <allan@archlinux.org>
A pkgdesc with spaces in it would get restored to an array and thus only
the first word would be restored (FS#15210). Convert that array back to a
string.
Signed-off-by: Allan McRae <allan@archlinux.org>
Errors in build() functions were only fatal, if "--log" was enabled. Errors in
package() functions were never fatal. Piping these functions through "cat -"
triggers error trapping. This prevents the need for "|| return 1" usage in
PKGBUILDs.
Original-patch-by: Juergen Hoetzel <juergen@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Checks if some or all packages are built before overwriting/installing.
Adds some new strings for translation.
Signed-off-by: Allan McRae <allan@archlinux.org>
See FS#14642- this allows -Qs output to be fed back into pacman without
problems or having to strip off the 'local/' prefix manually.
Signed-off-by: Dan McGee <dan@archlinux.org>
It was undocumented that multiple regexps are interpreted using logical AND.
Thanks to Recursive@#archlinux for his help.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
See FS#13099. This makes sense especially for the pacman frontend, as we
show groups in the search output.
Signed-off-by: Dan McGee <dan@archlinux.org>
When unzipping packages and the database archives, we don't need to look
through the entire archive to do what we need to do. For packages, .PKGINFO
should only be found once and should be the first file in the package. For
the database check, we only really need to look for one desc file.
The bsdtar -q option is very similar to the GNU tar --occurrence=1 option.
Example of speedup:
$ time repo-add junkdb.db.tar.gz *.pkg.tar.gz >/dev/null
real 0m16.159s
user 0m14.836s
sys 0m2.277s
$ time ./scripts/repo-add junkdb.db.tar.gz *.pkg.tar.gz >/dev/null
real 0m4.949s
user 0m3.730s
sys 0m2.093s
Signed-off-by: Dan McGee <dan@archlinux.org>
It wouldn't be very nice to ship a PKGBUILD with the wrong checksums.
Signed-off-by: Loui Chang <louipc.ist@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
$ sudo pacman -S mc
Old output:
***********
:: mc conflicts with mc-mp. Remove mc-mp? [Y/n] y
...
(1/1) checking for file conflicts [################] 100%
(1/1) installing mc [################] 100%
New output:
***********
:: mc conflicts with mc-mp. Remove mc-mp? [Y/n] y
...
(1/1) checking for file conflicts [################] 100%
(1/1) removing mc-mp [################] 100%
(1/1) installing mc [################] 100%
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The backup and restore of variables that can be overridden while
making split packages only dealt with the first element, not the
whole array (FS#15010). Adjust the bash voodoo to fix it...
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If PKGBUILD was good, the "insane" variable was not defined and so
the if statement failed. Simplify and fix this check.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#14899. When running an -Sp operation without servers
configured for a repository, we would segfault, so add an assert to the
backend method returning the first server preventing a null pointer
dereference.
In addition, add a new error code to libalpm that indicates we have no
servers configured for a repository. This makes -Sy and -S <package>
operations fail gracefully and helpfully when a repo is set up with no
servers, as the default mirrorlist in Arch is provided this way.
Signed-off-by: Dan McGee <dan@archlinux.org>
The main purpose of this function to make our code more readable.
It frees transaction specific fields of pmpkg_t. (It is used when a package
is removed from the target list.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
No new checks, just move it into a function and return 1 rather than exit
directly. This also allows the use of local variables.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
There is apparently no need to handle the re-compression manually when
applying a xdelta patch in case of bzip2 or xz.
Only gzip needs to be handled specifically for disabling timestamp with the
-n option.
After this patch, if xdelta is enhanced with xz support (1-line patch), it
will be transparent from pacman side.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
FS#8905 is fixed. The front-end passes PM_TRANS_FLAG_NOLOCK to the back-end,
so it doesn't lock the database. That's why we don't need root anymore.
I reworked (and renamed) needs_transaction() accordingly. I also added
missing -Sc check there (for example, -Sci didn't print non-root error, but
pacman wanted to lock the database).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This flag indicates that the front-end will not call alpm_trans_commit(),
so the database needn't be locked. This is the first step toward fixing
FS#8905.
If this flag is set, alpm_trans_commit() does nothing and returns with
an error (that has new code: PM_ERR_TRANS_NOT_LOCKED).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The pacman --help pages and the manual suggested that only one package can
be upgraded/removed per transaction.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This header was used in the code for the function strdup()
that is not used anymore.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
Before this commit, the repo creation could fail after all packages have
been added to the database. Now this will be detected before adding
anything.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
libgen.h was used for basename() in function main() from src/util/testdb.c
string.h was used for strlen() in function output_cb() from src/util/testpkg.c
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
This simple patch adds support for the xz archive format to makepkg and repo-
add.
Xz can be used as source, package and package db file type.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
[Dan: fixed a few alignment issues]
Signed-off-by: Dan McGee <dan@archlinux.org>
"Foo replaces bar" simply means that "foo is a new version of bar".
So this patch refactors the code to use this "rule".
_alpm_sync_sysupgrade now does the following for each local package [bar]
(pseudo-code):
for db in syncdbs {
if(db contains bar) {check if db/bar is an upgrade; break;}
replacers = find(bar replacers in db);
if(replacers!=NULL) {ask_user; break;}
}
Note:
1. Replacers are grouped per repo. If more than one package replace bar in
a repo, all of them are considered ("package set of bar replacers").
2. If repo1/foo1 and repo2/foo2 both replaces bar, only repo1/foo1 is
considered (if repo1 stands before repo2 in pacman.conf). FS#11737 is fixed.
3. It can happen that pacman doesn't consider any replacer, if it found a
literal "earlier", so sync132.py modified accordingly (btw, that situation
should not appear irl).
The new sysupgrade code doesn't use sync_newversion(), so I removed the
"local is newer than repo" message, which was annoying with -Qu and
SyncFirst.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The old documentation didn't emphasize our filtering options at all, and it
was a bit misleading. ("List ALL...")
I also clarified the description of -Qu.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add files pactest/tests/Makefile.in , pactest/tests/Makefile
and contrib/Makefile.in , contrib/Makefile to list of cleanup script.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
repo-remove.8 is generated with Makefile but is not removed on clean.
This patch add it to list of untracked autoconf files.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add an initial pactest/test/.gitignore to exclude sync200.py
that is generated from sync200.py.in
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
The bash source command looks in the users PATH for the file to source
before the local directory. This causes issues when someone has a
PKGBUILD somewhere in their path (for unknown some reason...).
Fixes FS#14727.
Signed-off-by: Allan McRae <allan@archlinux.org>
When making a source package for a SCM PKGBUILD, makepkg should not
update the pkgver/pkgrel. Noted in FS#14456.
Signed-off-by: Allan McRae <allan@archlinux.org>
With --quiet flag, -Ql doesn't print the package name, just lists the files.
I made --quiet documentation up-to-date (I also added -Sgq/-Qgq).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
1) Do not attempt to strip compressed binaries
Original-work-by: Marc - A. Dahlhaus <mad@wol.de>
2) Add "\" in "GPL\'ed" so quote mark does not break source code highlighting
3) Add local to docdir paths in makepkg.conf for consistency
4) Use full path to sed in MacOSX in case users have GNU sed earlier in
path
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Do a sed replacement in-place is not very portable. On Mac OSX and
BSDs, the syntax is "sed -i ''" where as with GNU sed the command is
"sed -i''" or just "sed -i". This patch detects which command should
be used during configure.
Credit to Kevin Barry who researched this issue and provided a patch
to work around this using temporary backup files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes a bug introduced by my previous changes which changes the
behavior of IgnorePkg/IgnoreGroup to allow the user to remove unresolvable
packages from the transaction. The bug is that the target-list was no
longer being consulted first to resolve dependencies, which means that if
two packages in the sync database satisfied a dependency, and the user
explicitly requested one of those two packages in the sync, the other
package was still being pulled in.
A new test was added, sync993.py, to verify the desired behavior.
Signed-off-by: Bryan Ischo <bji-keyword-pacman.3644cb@www.ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
pmsyncpkg_t data sructure was removed:
1. pmpkg_t.reason is used instead of pmsyncpkg_t.newreason. (The target
packages come from sync repos, so we can use this field without any
problems. Upgrade transaction also uses this field to store this info.)
2. pmsyncpkg_t.removes was moved to pmpkg_t.removes.
This step requires careful programming, because we don't duplicate packages
when we add them to trans->packages. So we modify sync pkgcache when we
add this transaction-only info to our package. Hence it is important to
free this list when we remove any package from the target list
(remove_unresolvable, remove_conflicts, trans_free), otherwise this could
confuse the new sync transactions (with non-pacman GUI).
Overall, our code became ~100 line shorter, and we can call our helper
functions directly on trans->packages in sync.c, we don't need to maintain
parallel package lists.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
From now on _alpm_db_find_fileconflicts() works with upgrade and remove
target lists (like checkdeps), which makes it transaction independent
(we still need a trans param because of the progressbar). This is a small
step towards the universal transaction. So we call this function directly
from sync.c before commiting the remove transaction. This is much safer,
but we can get false fileconflict error alarms in some tricky cases
("symlinks puzzle" etc).
The patch on find_fileconflict looks complex, but it is mainly an
"indent-patch", the new code-part can be found after the
/* check remove list ... */ comment, and I modified something around the
"file has changed hand" case (see comment modifications in the code).
Unfortunately sync.c became more ugly, because we have to create 2 parallel
internal transactions: to avoid duplicated work, upgrade transaction is
used to load package data (filelists). This problem will disappear, when
we finally get rid of internal transactions.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Resolvedeps reports error when it cannot resolve some dependencies, puts
them into the *data list, and set pm_errno. If user removes the
unresolvable packages from the target list, we have no error anymore,
so from now on we free *data list (we eliminate a memleak) and unset
pm_errno.
(Additionally I removed two needless lines from the code, unresolvable list
is always freed in cleanup.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit f57f8d3386 pacman *silently*
ignores packages from IgnorePkg/IgnoreGroup during dependency resolving,
if prompt == 0. This behavior is changed to "give warning + ignore".
(Otherwise the user is not informed about the fact that the package
resolving was blocked by ignorepkg.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes FS#12059.
Now sync_addtarget can return with PM_ERR_PKG_IGNORED, which indicates that
although the requested package was found it is in ignorepkg, so alpm could
not add it to the transaction. So the front-end can decide what to do.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The index in the for loop wasn't being incremented, so
if the first file wasn't found, the second file would be compared to the
first checksum, rather than the second.
Signed-off-by: Loui Chang <louipc.ist@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds alpm_db_update() to the alpm_databases Doxygen group. The function
is described in more detail and a code example is given.
Signed-off-by: Dan McGee <dan@archlinux.org>
Move some of our documentation files, even though they aren't manpages, to
the doc/ directory. This allows the new 'html' make target to manage them.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now the comment was showing up in the generated manpage and HTML
documentation. Just kill it as asciidoc keeps screwing us over.
Signed-off-by: Dan McGee <dan@archlinux.org>
After some irc/forum experiences, I decided to document this option.
However, I left the debug-level undocumented (--debug=2).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
After the splitpkg implementation, the tidy_install function
was not being called in PKGBUILDs with only the build() function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Fixes FS#13417. Do no exit makepkg on a failure to install the
built package(s). This allows clean-up to still occur.
Signed-off-by: Allan McRae <allan@archlinux.org>
The log files now have -build or -package at the end and there
are separate log files for each *_package() function. Alter
clean_up() to deal with this. Also, move glob outside quotes so
this actually works.
Signed-off-by: Allan McRae <allan@archlinux.org>
The pkgbase variable is added to improve informational output and
source package naming when using split packages. Defaults to
${pkgname[0]} if not set.
Also:
- move splitpkg detection to after pkgname presence is verified
- add "cd" line to package_foo() functions in splitpkg proto
Signed-off-by: Allan McRae <allan@archlinux.org>
The modification time on depends and desc file were changed to match the
modification time of the package file. I don't see why and we are actualling
losing information here. If we want to know the date of the package file, we
can just look inside the depends file. If we want to know when the entry was
created, we should not alter the modification time of depends and desc.
Besides, this had the non-obvious and undocumented side effect that the
depends file was always created, even if it was empty. And pacman actually
does require that. So I added a "touch depends" to always create the file.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Weird things could happen if several repo-add were run concurrently on the
same database. The introduced locking system will prevent this to happen.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
- arch was missing
- backup is not used by repo-add. However makepkg still needs to put it in
PKGINFO because pacman uses it
- startdir is no longer used after the new delta implementation
- the declaration of group, depend, backup, etc is not needed because these
variables are always declared before being used :
declare $var="$val"
case "$var" in
group) _groups="$_groups$group\n" ;;
- reorder the variables declaration to follow the same order than they are
written to the depends and desc file, for making future checks easier
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Use the correct database format
Use xdelta3 to get the source and destination files from the delta itself
Allow delta files to be added with repo-add just like package files. delta
files can also be removed with repo-remove. This is simply done by looking
for a .delta extension in the arguments, and calling the appropriate
db_write_delta or db_remove_delta functions.
Example usage:
repo-add repo/test.db.tar.gz repo/libx11-1.1.99.2-2-x86_64.pkg.tar.gz
repo-add repo/test.db.tar.gz repo/libx11-1.1.5-2_to_1.1.99.2-2-x86_64.delta
repo-remove repo/test.db.tar.gz libx11-1.1.5-2_to_1.1.99.2-2-x86_64.delta
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
The current implementation has several problems :
Wrong database format
All the info is taken from the filename, which is a bit ugly
It looks for .delta files in the current directory when adding a package,
which is not very flexible
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
* report when a package entry to be removed is not found
* backup and restore eventual "deltas" files
* slight optimization when looking for an entry : only look at the entries
starting with $pkgname
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
This should obsolete the delta support in makepkg. Having a separate script
should be more flexible.
Example usage:
$ pkgdelta repo/tzdata-2009a-1-x86_64.pkg.tar.gz repo/tzdata-2009b-1-x86_64.pkg.tar.gz
==> Generating delta from version 2009a-1 to version 2009b-1
==> Generated delta : 'repo/tzdata-2009a-1_to_2009b-1-x86_64.delta'
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
1) The changes to sync.c look big but there are mostly caused by
the indentation. Fix a bug where download_size == 0 because the packages and
deltas are already in the cache, but we still need to build the deltas list
and apply the deltas to create the final package.
2) Fix the gzip / md5sum issue by switching to xdelta3, disabling external
recompression and using gzip -n in pacman, and disable bsdtar compression
and using gzip -n in makepkg.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
This reverts commit 9558639d80.
This change was wrong, popen does require /bin/sh in a subchroot.
1) pacman -S lilo -r root
Notice no error
2) rm root/bin/sh ; pacman -S lilo -r root
Notice an error :
error: scriptlet failed to execute correctly
Actually, we already get an explicit error here, when popen is run, so there
is no need to check for bin/sh explicitely.
Besides this check was problematic in some cases. For example, bash itself
has a scriptlet, but only post_install and post_upgrade, no pre_install and
pre_upgrade. However, since bash has a scriptlet, runscriptlet will also be
called before bash is installed. It won't do anything since the scriptlet
has no pre_install function. But if we keep the check, we will still get
"error : no /bin/sh".
Conflicts:
lib/libalpm/trans.c
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bug I noticed 2 years ago :
http://www.nabble.com/Re%3A-logging-output-crazy-to11437357.html#a11479679
I thought I fixed it with 57d77eab32
But the bug was still here. Reading man fork, this part caught my attention:
* The child inherits copies of the parent's set of open file
descriptors. Each file descriptor in the child refers to the same open
file description (see open(2)) as the corresponding file descriptor in the
parent. This means that the two descriptors share open file status
flags, current file offset, and signal-driven I/O attributes (see the
description of F_SETOWN and F_SETSIG in fcntl(2)).
Since the open file descriptors are inherited, it is probably a good idea to
flush them before forking.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The from_md5 and to_md5 fields were a nice extra safety, which would avoid
trying to apply deltas on corrupted package files. However, they are not
strictly necessary, since xdelta should be able to detect that on its own.
The main problem is that it is impossible to compute these informations from
the delta only. So repo-add would not be able to compute the delta entry
based on just the delta file.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Don't prompt the user for unignore of IgnorePkg/IgnoreGroup packages,
except for packages explicitly listed for sync by the user. This
eliminates many unnecessary prompts when IgnorePkg/IgnoreGroup is
used.
Signed-off-by: Bryan Ischo <bryan@ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Enabled a new prompt to ask the user if they'd like to remove
unresolvable packages from the transaction rather than failing it.
Many pactest tests that used to fail now return success codes, because
pacman now issues a prompt allowing the user to cancel rather than
failing many transactions, and the pactest scripts always choose to
cancel with no error rather than failing. The only net effect is that
the return status of pacman is now 0 in cases where it used to be
nonzero.
Signed-off-by: Bryan Ischo <bryan@ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 1e656c0a introduced the changing of pkgrel to 1 when the
pkgver was updated in SCM PKGBUILDs. However, the output in the
"Making package:" was wrong. Attempting to fix that created
another bug (FS#13416). Interestingly, pkgver was only ever
being updated in the fakeroot stage which caused this problem.
Now both pkgver and pkgrel are updated after the first
devel_check and devel_update. Enjoy the really long explaination
for a two line fix...
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Rework slightly db_write_entry so that $pkgfile is no longer referenced
from the temporary dir. This means $pkgfile can be a relative path and does
not need to be converted with realpath anymore.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
REPO_DB_FILE does not need to be an absolute path anymore so no need to
call realpath.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This change reorganizes the internal code so that packages are
resolved one at a time instead of all at once from a list. This will
allow a future checkin to prompt the user to see if they'd rather
remove unresolvable packages from the transaction and continue, or
fail the transaction. This change does not affect the actual behavior
of libalpm and all tests pass without changes.
Signed-off-by: Bryan Ischo <bryan@ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The previous translation of 'targets' meant literally 'it targets' and it
sounded awkwardly. The current version is a plural of a 'target'.
Signed-off-by: Jan Stępień <jstepien@users.sourceforge.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function was used only once, was basically just one line, and was also
called with an unused argument.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I initially only wanted to add a -l/--locate option to use locate instead of
find, which should have been easy.
Then I thought I would try to support filename with whitespace while I was
at it, and this was a bit more complex. The safest ways seem to be the
following ones : http://mywiki.wooledge.org/BashFAQ/020
Then I received a lot of suggestions on #bash about how to improve the
script, which I tried to address.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: fix grouping of find arguments]
Signed-off-by: Dan McGee <dan@archlinux.org>
Change configure.ac to use the full path of stat when on darwin/mac.
This is needed for situations when a user installs the GNU/coreutils
and places it in their path before /usr/bin, but the SIZECMD is
already configured for Darwin's version of stat.
Signed-off-by: Kevin Barry <barryk gmail com>
Signed-off-by: Dan McGee <dan@archlinux.org>
eval was ugly and dirty, and bit us here. Instead, use a safer form of
variable declaration to ensure quotes don't foil us in pkgdesc or any other
fields.
This fixes FS#10837.
Signed-off-by: Dan McGee <dan@archlinux.org>
The Linux and BSD versions of strip have the --strip-debug option (as
well as the -S option), however Mac OS X only has -S.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to create the directories when local or sync dbs are
registered. For example, if a sync db does not exist, we cannot even do
"pacman -Q" as an user.
Instead, we can create the local db if needed during the db_prepare
operation, and sync dbs on db_update.
Also remove some more useless abstractions in db_update and switch to a much
more efficient way to remove a sync db : rm -rf.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
These db_open and db_close looked quite useless. And they caused the db
directory to be opened on a simple registering of a database. This is
totally unneeded, this opening can be delayed to when we actually need it.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Instead of appending the prefix to each entry name, we can chdir to the
prefix before extracting, and restoring when it is done.
This seems to work better with the strange and special case of FS#12148
where an archive contained the "./" entry.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
The goal of this fix was empty string comparisons:
- if [ "$pkgname" != "" ]; then
+ if [ -n "$pkgname" ]; then
Signed-off-by: Dan McGee <dan@archlinux.org>
In a lot of places, we had the following construct:
[ "$foobar" = "0" ]
which is better represented by using the integer tests:
[ $foobar -eq 0 ]
Attempt to unify makepkg to use the latter rather than the former in all
places. From here on out we should ensure anything that is set to 0, 1, etc.
uses the -eq format rather than =.
In addition, fix a few other test anomalies including usage of double
equals.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes FS#12148 ('unstable' regular file).
I also changed the other archive_entry_set_mode usage in add.c to
archive_entry_set_perm.
Since I cannot find any relevant info in libarchive manual, I quote
Tim Kientzle (the author of libarchive) here, and I say thank you for
his help.
*** Tim Kientzle wrote *************************************
This is the problem in libalpm/util.c:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_mode(entry, 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_mode(entry, 0755);
327 }
Your example unstable.db.tar.gz is not empty. It has
one entry in it, called "./". That entry is marked
as a directory. But, when you call archive_entry_set_mode(),
you are changing the file type! archive_read_extract()
then creates the file /var/unstable as you requested.
(archive_read_extract() will replace an empty directory
with a file.)
You should either set the mode value correctly:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_mode(entry, IFREG | 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_mode(entry, IFDIR | 0755);
327 }
Or use archive_entry_set_perm(), which does not change
the file type:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_perm(entry, 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_perm(entry, 0755);
327 }
************************************************************
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
When using the optional package() function or split packages, the
entire packaging step is rerun instead of just final package
creation step.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* am/splitpkg:
makepkg: implement creation of split packages
makepkg: Optional argument for run_package and create_package
makepkg: hack around tee in run_package function
makepkg: add functions for backup and restore of package fields
makepkg: add optional package function
makepkg: Add PKGBUILD-split.proto
Generalize run_package to allow the passing of a package name
directing the use of an alternative package function. A similar
adjustment to create_package to prepare split packages.
Signed-off-by: Allan McRae <allan@archlinux.org>
Piping the package function through tee to log the outut also
clears any variables set in the package function. This is a
problem in split packages as package variable overrides are done
in the package function. This is fixed by creating a node which
the output is piped through and duplicated using the tee function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Adds functions for the backup and restoration of package variables
that can be over-ridden during package splitting. Variables which
can be overridden are given in the splitpkg_overrides variable.
Signed-off-by: Allan McRae <allan@archlinux.org>
This patch allows us to split the building and packaging stages of
a PKGBUILD and minimize fakeroot usage. This can be done with less
code duplication (run_build and run_package look quite similiar) but
the run_package function will be where the package splitting logic
is implemented in the future.
Signed-off-by: Allan McRae <allan@archlinux.org>
Considering one can easily run:
repo-add .... >/dev/null
to get only warnings and errors, the -q flag is mostly useless.
Make the -q flag silence only level 2 messages.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Clearly the old code was more elegant (NULL cache indicated "not loaded"),
but it had some drawbacks, so from now on we indicate the state of caches
explicitly.
Old drawbacks:
When we had an empty database (unstable), libalpm called db_populate after
every pkgcache access, because NULL pkgcache indicated "not loaded" state.
This is not a common case, but the same situation can happen with grpcache,
which is more problematic: If the user had a custom repo with no groups,
grpcache was always NULL. (grpcache is also loaded per database.) Thus
every get_grpcache call induced a load_grpcache operation, so the benefits
of grpcache was completely lost.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces the following function name convention:
_compute_ in function name: the return value must be freed.
_get_ in function name: the return value must not be freed.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The HoldPkg feature is even more important when the packages to be held are
pulled automatically by pacman, in a -Rc and -Rs operation. Before, it only
applied when the packages were explicitly requested by the user to be
removed. This patch extends holdpkg to -Rc and -Rs by doing the HoldPkg
check just before trans_commit.
Additionally, the whole HoldPkg stuff was moved to the front-end.
I changed the default behavior to "don't remove", so I modified remove030.py
pactest as well.
See also: FS#9173.
Original-work-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Aaron said to consider libdownload a dead project so libdownload support was
removed to more easily fix libfetch one (otherwise many ifdef needed).
There was no direct replacement for ferror to detect an error while
downloading. So instead, I added a check at the end to see if the file was
fully downloaded, which is just a small chunk of code taken from here:
http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/net/libfetch/files/fetch.c?only_with_tag=MAIN
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch started as a simple typo fix (pugre instead of purge in two
places), as well as a fix of a test which was using PURGE_TARGETS instead of
$PURGE_TARGETS.
It evolved in a slight handling change of the OPTIONS which have a variable
affecting their behavior (strip STRIP_DIRS, docs DOC_DIRS, zipman MAN_DIRS
and purge PURGE_TARGETS), as well as a clarification in makepkg.conf. Now
when a variable is undefined or empty, the corresponding option will have no
effect. It looked weird to have a fallback when a option is defined but
empty, it seems more natural to not have any fallbacks.
Also re-enable docs by default. It seems arbitrary to delete files from
packages by default, and it would be more vanilla and distro agnostic to
keep them. docs was also the only negated option.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Provide support for specifying LDFLAGS within makepkg.conf but leaves
this undefined by default. Fixes FS#12542.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 4b183bf9 moved makepkg.conf sourcing to after the parsing
of options, breaking the -p option and --help output. The solution
is to move BUILDSCRIPT out of makepkg.conf. This patch moves the
definition BUILDSCRIPT back to makepkg itself and adds configure
option to allow easy changing of this value during build time.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The purge option, combined with the PURGE_TARGETS variable,
allows makepkg to automatically remove commonly confliting or
removed files (e.g. /usr/share/info/dir, *.pod).
Original work: Tim Yang
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds defined options to the PKGINFO file in the form of "makepkgopt =".
It may be useful to be able to add these to the pacman DB at some point
as that would allow (e.g.) checking which packages have had their docs
striped (FS#7092).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents makepkg compressing every file when MAN_DIRS is not
supplied in makepkg.conf
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Provides a MAN_DIRS variable in makepkg.conf which can be used
to specify folders to look for manual (man and info) pages to be
compressed. Useful for packages that install to /opt. Also
clarifies that "zipman" means "zip manuals" and covers both man
and info pages.
Original work by: Tiago Pierezan Camargo <tcamargo at gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step in being able to automatically remove phantom
lock files.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: fix compilation warnings]
Signed-off-by: Dan McGee <dan@archlinux.org>
Changelogs and install files were getting extracted into the local
db folder before it was manually created. This created issues for
uses with 0077 umasks and was highlighted with the new sudo handling
of umasks (FS#12263).
This moves the local db creation to its own function which is called
before the start of package archive extraction. Also, added a check
that the folder is actually created.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: rename to _alpm_db_prepare()]
Signed-off-by: Dan McGee <dan@archlinux.org>
Pacman currently logs .pacnew warnings to pacman.log but a similar history
of .pacsave warnings isn't kept. The user should be able to search
pacman.log to discover when and where all .pac* files were created by
pacman.
Addresses FS#12531.
Signed-off-by: Dan McGee <dan@archlinux.org>
Using > or < in the provides array is wrong so make it cause an error.
Fixes FS#12540.
Also, use bash substitution rather than spawning new processes where
possible in the error checking. Move split package detection to a
better position.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: backport to maint]
Signed-off-by: Dan McGee <dan@archlinux.org>
The use if "! -z" to check if a string is not null is not good practice
so replace with the "-n" option. Also use the AND comparison within one
test rather than on two separate tests.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allows specifying alternative build script with spaces in name
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: backport some of the fixes to maint]
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow makepkg to work on systems like Mac OS X where the
default getopt is too old to properly handle long options.
The new parse_options function should replicate getopt's behaviour
completely.
Original work: Yun Zheng Hu <yunzheng.hu@gmail.com>
[Allan: Rewrite and bug fixes]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
May help debug issues we come across with proxy behavior (e.g. those pesky
segfaults) as well as be informative to the user when things aren't working
quite right. Addresses FS#12396.
Signed-off-by: Dan McGee <dan@archlinux.org>
1. Do not warn people about missing arch if they are using --ignorearch.
2. Remove unneed reference to bug report about using fakeroot as little
as possible. We want to do that, bug report of not.
3. Removes superfluous warning given when building as root. The user
has already used the "--asroot" flag.
4. Move comment about skipping warning message to above where it occurs
5. Do not warn about skipping source retreval, integrety checks and
extraction when using --repackage
6. Do not warn about skipping build when using --repackage
7. Move comment about fakeroot usage to above test condition
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix the issue uncovered by FS#12344. In this instance, the dotglob shopt was
being set in the build() function but never cleared, causing issues in the
remaining parts of the makepkg script.
Signed-off-by: Dan McGee <dan@archlinux.org>
The option parsing was catching any "-d" in an argument so packages
with this in their name did not work.
Also removed commented code line that appears to be inserted during
testing.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When the output is going to a file, glibc seems to buffer way too much
making it hard to monitor progress while tailing a file.
Signed-off-by: Simo Leone <simo@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If the delta line doesn't match our regex, we won't go and process it,
possibly walking off the end of the string.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch slightly modifies pacman.c/_parseconfig():
See FS#12148. Now pacman prints the following error message in that case:
"error: could not register 'unstable' database (could not open database)"
I also added an error message for alpm_db_setserver() error.
I changed the "return(1);" scheme to "ret = 1; goto cleanup;" to make
sure that we free allocated memory and close open files.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Not only does this require less sed-magic, it also fixes FS#12286 where
fetching the revision number fails if mercurial is in compact mode.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't want a failed write to kill our whole program when we are
downloading things, so set the SIGPIPE handler to ignore when downloading
and restore any previous signal handler when we complete the download.
Signed-off-by: Dan McGee <dan@archlinux.org>
Use libfetch naming in the code in place of libdownload names. This is in
preparation for dropping support for libdownload at some point as libfetch
can run on Linux.
Signed-off-by: Dan McGee <dan@archlinux.org>
From now on -Qu is an "outdated package" filter on local database.
(This is a behaviour change.)
This patch fixes some memleaks and makes the code cleaner, for details see
my comment on FS#7884.
FS#11868 is implemented.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
If PKGBUILD (BUILDSCRIPT) is not found, test for information from a
pipe and use that. Fixes FS#9187.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Do not attemp to update pkgver/pkgrel when reading a SCM based PKGBUILD
from a pipe.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Example usage and output :
> src/util/testdb -h
usage:
testdb [-b <pacman db>] : check the local database
testdb [-b <pacman db>] core extra ... : check the listed sync databases
> src/util/testdb
Checking the integrity of the local database in /var/lib/pacman/
> src/util/testdb core extra testing community
Checking the integrity of the sync databases in /var/lib/pacman/
missing dependency for archboot : bcm43xx-fwcutter>=006-2
missing dependency for xvattr : xfree86
missing dependency for eclipse-ve : eclipse<3.3
missing dependency for flumotion : twisted-web
missing dependency for gg2 : arts
missing dependency for man-pages-cs : groff-utf8
missing dependency for qc-usb : kernel26<2.6.26
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch addresses quite a few lingering issues in the pacman-optimize
script. FS#11767 provoked this look-over and the following issues were
noticed and fixed:
* If an alternate dbroot was specified, then the lockfile location was never
updated to reflect it. The lockfile location is now set after all dbpath
initialization.
* The inclusion of a trailing slash on dbroot was problematic and led to the
following command being executed:
bsdtar -xpf /tmp/pacman-optimize.p12Q4vAUWY/pacman-db.tar.gz \
-C /var/lib/pacman/.new/
It is doubtful we meant to create a hidden directory like this below our
database root, only to go and delete it a second later and then
re-extract. Fix the whole thing by ensuring our dbpath has its trailing
slash stripped and then appending it when necessary.
* The DB extraction was performed twice for no real apparent reason. This
opens the door for extraction problems the second time around, leaving you
with no original database to fall back to. Change the behavior so we only
extract once, and then perform a directory shuffle once we verify the
checksums are correct.
* Perform an explicit sync after we drop the new database on the disk. It
should work better this way.
* Tighten up our check for a pacman lockfile and the time we create one.
There is still a possible race condition but the window is shorter.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is similar to the change we made in makepkg so it is cross-platform
compatible and doesn't require coreutils.
Signed-off-by: Dan McGee <dan@archlinux.org>
We never had a call to pclose() in here before, leaving our file descriptor
in some sort of limbo state. In addition, clean up some of the other logic
such as directly calling exit(1) on a popen() failure rather than going to
our cleanup block, and handling and respecting the exit status of the
subprocess correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
Inspired by commit 7e8f1469c4, use our given
PKGEXT or SRCEXT to determine what method of compression to use on the
package we create. If the extension is invalid, this should fall back to
creating a non-compressed tar file.
Signed-off-by: Dan McGee <dan@archlinux.org>
When we do our sed edits, we really don't need every command printed out to
the terminal. Now with "make -s", the output is quite palatable.
Signed-off-by: Dan McGee <dan@archlinux.org>
Calling printf() in a signal handler can be dangerous, so avoid it by
writing directly which is guaranteed to be safe according to signal(7).
Signed-off-by: Dan McGee <dan@archlinux.org>
I mess this up more often than not, and maybe this will do the trick. Remove
the --enable-asciidoc option as it has been superseded by the --disable-doc
option in usefulness. If you want to skip building docs, you skip building
all docs which is much easier when it comes to ensuring the make 'dist' and
'distcheck' targets will always build the manpages and always build the most
up to date manpages.
Developers shouldn't be affected in their normal builds, nor should end
users of the source tarball.
Signed-off-by: Dan McGee <dan@archlinux.org>
Do the checks in the tests that need it, and get rid of some of the
cluttered output when it is not available (one line per test run).
Signed-off-by: Dan McGee <dan@archlinux.org>
Every call to getcols() results in two ioctl() calls, which we really didn't
need as changing the number of columns in mid-print would be pretty crazy.
Signed-off-by: Dan McGee <dan@archlinux.org>
It is possible to throw EINTR from a system call such as open(), close(), or
waitpid() if custom signal handlers are set up and they are not initialized
with the SA_RESTART flag. This was noticed by Andreas Radke when ^C (SIGINT)
was given during the call to waitpid(), causing it to throw the EINTR error
and we could not accommodate it.
Simply wrap these calls in a simple loop that allows us to retry the call if
interrupted.
Signed-off-by: Dan McGee <dan@archlinux.org>
Because libalpm always returns a root path with a trailing slash, when we
use it to create our unspecified paths we get double slashes in the result.
Use the fix suggested by Jürgen Hötzel to remedy this.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#11339, which is a regression of commit 89c2c5196:
When totaldownload is enabled, the database downloading percent (-Sy) is
always at 0. That is because we have no guarantee that the totaldownload
callback was called by libalpm. In particular, it is not called (and it
would not make sense to) when a single file is downloaded, like it is the
case with databases.
So the correct way to detect if totaldownload should be used is checking
both config->totaldownload and list_total, like it was already done in
several places in the cb_dl_progress function.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
A source entry can now have the following form, to specify a different
filename :
"filename::http://path/to/file"
Of course, the old syntax is still supported :
"http://path/to/file"
And as before, in the second case, the filename used is simply "file".
This fixes FS#11292, because handling multiple source files with the same
name is now possible (just choose a different filename).
But it will also allow to deal much more nicely with funny url like this by
using a sane filename (and unfortunately, there are quite a few) :
http://www.vim.org/scripts/download_script.php?src_id=6992
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more consistent with the private functions :
_alpm_db_get_{pkg,grp}cache
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
These two functions now take directly a package list rather than a database.
checkdbconflicts was renamed to checkconflicts.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
During an upgrade, only the new optdepends will be displayed, to only keep
the useful information and not clutter pacman output too much.
The whole optdepends list is always available with -Si / -Qi.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 7865fb9af4, info pages are now treated like man pages.
This means even with !docs, info pages will still be included. And including
info pages was the main reason the docs option was enabled by default
recently. So this is now longer needed, and we can revert back to !docs by
default for disabling gigantic html pages and other docs.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Update all .po files because of the last "-q,--quiet" fix.
Also for some strange reason, en_GB was missing a few c-format tags.
* Finally, delete all unused translations.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was a stupid and unimportant regression caused by commit
4476598e4e .
When libdownload is not available, a xfercommand is needed for this pactest
to run properly.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Added a Makefile.am for the pactest/tests dir. This is a blatant ripoff
of scripts/Makefile.am, which replaces predefined expressions in
NAME.py.in pactests with configure variables.
This can be used to write pactests which consider compile time options.
Signed-off-by: Henning Garus <henning.garus@gmail.com>
[Dan: autotools are tough, make a few adjustments for correctness]
Signed-off-by: Dan McGee <dan@archlinux.org>
DB_COMPRESSION was only used in repo-add and DB_CHECKSUMS was not used
anywhere.
This also removes the dependency on makepkg.conf in repo-add, so repo-add no
longer needs to source makepkg.conf
And instead of DB_COMPRESSION, it seems better to just check the extension
of the repository file. It does not make sense to have a tar.gz file with a
tar.bz2 extension or whatever.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had one "None" and one "None\n" string; we can let the program do the
addition of the newline so we don't have to.
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently we use the INTEGRITY_CHECK array from makepkg.conf to limit both
the integrity sums generated and checked. It doesn't make a whole lot of
sense to ignore integrity sums that are present in a PKGBUILD, so this patch
will enable checking any that are available, but will only print a warning
about missing sums for those types found in INTEGRITY_CHECK.
It also adds a slight optimization of checking for openssl- we only need to
check once now because we use the same program for all checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch kills one of our hackish pseudo transactions: PRINTURIS.
(The other one is -Sw)
From now on, front-end must not call trans_commit in case of -Sp,
it should print the uris of target packages "by hand" instead.
PRINTURIS flag was removed, NOCONFLICTS flag can be passed to skip
conflict checks.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function returns with the origin database of a package.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The yesno function had a preset argument for specifying the default answer :
yes or no.
However, in all our calls to yesno, only one used the default "no" answer.
Having to specify preset==1 for all the other cases was rather cumbersome.
To make this easier, this commit adds a noyes function, with the following
behavior :
yesno() : default answer is yes
noyes() : default answer is no
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
As far a package building is concerned, info pages need to be treated
in the same fashion as man pages in that they both can be compressed.
This separates them from other forms of documentation and so it makes
sense to make that distinction within makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more rational and coherent with PM_TRANS_EVT_UPGRADE_DONE.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of pausing 1.5 seconds on tests that check file mtimes, change the
mtimes to something in the far past so we can immediately tell if a file was
modified and/or touched. This saves a decent amount of time on the upgrade
tests which often check mtimes.
355 was a completely arbitrary time value, don't ask me why I picked it.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Change the return values to be more informative.
It was previously boolean, only indicating if a sync package was newer than
a local package.
Now it is a simple wrapper to vercmp, handling the force flag.
* Remove the verbose output from _alpm_pkg_compare_versions.
The "force" message is not so useful.
The "package : local (v1) is newer than repo (v2)" message can be moved to
-Su operation.
For the -S operation, it is better to have something like :
"downgrading package from v1 to v2"
* Don't display the "up to date -- skipping" and "up to date -- reinstalling"
messages, when the local version is newer than the sync one.
* Fix the behavior of --needed option to not skip a target when the local
version is newer, and clarify its description.
* Add a new alpm_pkg_has_force function
This allows us to access the pkg->force field like any other package fields.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a work around for FS#8725.
There are some bad combination of proxies and mirrors where the Content
Length is not returned, and thus the progress bar can't be displayed
correctly.
Dan: Note that this patch also adds a "downloading" message when the
progress bar is disabled, which was formerly not indicated at all in the
output.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The HACKING file seemed to be broken :
http://archlinux.org/pacman/HACKING.html
And indeed, running asciidoc HACKING issued a number of warnings :
WARNING: HACKING: line 27: missing [paradef-default] C-style entry
type: numbered : expected 1 got 3
WARNING: HACKING: line 44: list item 3 out of sequence
WARNING: HACKING: line 49: missing [paradef-default] C-style entry
type: numbered : expected 2 got 4
WARNING: HACKING: line 62: list item 4 out of sequence
type: numbered : expected 3 got 5
WARNING: HACKING: line 69: list item 5 out of sequence
type: numbered : expected 4 got 6
WARNING: HACKING: line 75: list item 6 out of sequence
type: numbered : expected 5 got 7
WARNING: HACKING: line 83: list item 7 out of sequence
WARNING: HACKING: line 104: missing [paradef-default] C-style entry
WARNING: HACKING: line 116: missing [paradef-default] C-style entry
WARNING: HACKING: line 126: missing [paradef-default] C-style entry
I just followed the syntax example there :
http://www.methods.co.nz/asciidoc/userguide.html#X56
And all is fine now :)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman already localizes the yesno stuff, so doing the same in makepkg is
more consistent.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
list_display puts several members on the same line, which is not appropriate
for optdepends:
Optdepends: foo: feature1 bar: feature2 baz: feature3
The new list_display_linebreak function puts every member on its own line,
which is much better with optdepends:
Optdepends: foo: feature1
bar: feature2
baz: feature3
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: implement this new behavior as a new function rather than as a
parameter of list_display]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
So dump_pkg_full will indent all strings correctly.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: add string_length function]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#11283 , which was originally reported on the forums :
http://bbs.archlinux.org/viewtopic.php?id=53794
Insensitive comparisons were implicitly made before since md5sum --status was
used for checking. Now that we use openssl and compare checksums manually in
bash, we lost that feature.
This can be easily reintroduced using tr '[A-F]' '[a-f]'
What convinced me to fix it is that the md5 command line tool generates md5sums
in upper case by default :
http://www.fourmilab.ch/md5/
And finally, A-F and a-f are the same in hex and both are used.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 149839c539 introduced a small behavior regression as a drawback
for a better portability. repo-add now includes the approximate size (to the
nearest KB) rather than an exact size due to the switching of the du command
to a more portable form. Instead of sacrificing the exact size, use
configure to help us determine a valid command to acquire our filesize and
place it in the sync database.
Signed-off-by: Dan McGee <dan@archlinux.org>
repo-add didn't handle whitespaces nicely in fields value, and this has hurt
us several times, first with provision version (FS#9171) and then with
optdepends (FS#10630), so it is time to fix it.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Probably a tweakable "lockdb-retry" option was planned which is not
implemented. (Now it should be implemented in front-end.)
So now this variable was unused and caused a small memleak.
(FREE(dir) was not reached in case of error.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#11203.
The doc has always mentioned NoPassiveFtp, but an inconsistency was
introduced with commit 76f816b9f7 when case
sensitive comparision was introduced, and was only found after commit
b3e6cf652c which dropped the case insensitive
comparison.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
curl is likely to be available on the majority of systems and supports the
file:// protocol.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#11180.
The usage of the total percent was detected like this :
/* use disp_percent if it is not 0, else show bar_percent */
However, it is very possible that the total percent is 0 at the beginning,
if the first packages downloaded are very small compared to the total
download.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
With the "set -e" property set, a failure when sourcing /etc/profile
can cause makepkg to exit without error message. The bash-completion
package activates this bug. Fixes FS#11179.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When this function got a rewrite in commit f43805d875, argument and variable
names got a bit mixed up when separating the casts from the strcmp
operation. Fix the mixup which also fixes a possible segfault when this
function is called.
Signed-off-by: Dan McGee <dan@archlinux.org>
By doing the bolding manually, it doesn't look as cool in the HTML generated
manpages. Let asciidoc do the work.
Signed-off-by: Dan McGee <dan@archlinux.org>
If a Server specified in pacman.conf had a trailing slash, libalpm ended up
building URLs with double slashes, and this broke libdownload with errors
like the following one :
error: failed retrieving file 'redland-1.0.8-1-i686.pkg.tar.gz'
from 192.168.0.90 : Command okay
So the public function alpm_db_set_server will make sure to remove the
trailing slash of servers. For the private function
_alpm_download_single_file, I only added a comment.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Before commit fc48dc31, file:/// urls forced the use of the internal
downloader (libdownload), because the default XferCommand, wget, does not
handle them. We tried to move away from forcing usage of libdownload, so
this commit implemented the handling of file:/// urls manually. However,
this implementation is way too basic. It does not handle the progress bar,
thus nothing at all appears in pacman's output when a file: repo is
synchronized, or when a file is downloaded from a sync repo. Also, it is not
able to detect when the repo is already up-to-date. When libdownload was
used, both were handled.
It seems better to just drop this implementation for now. All users who use
libdownload will get the much better file:// handling back. For the users of
XferCommand, it will be more problematic, but they have several options:
1) Switch to a downloader handling file:// (wget doesn't, but curl does for
example).
2) Drop the file:// repo, and set up light http or ftp servers instead.
Consider that going that way would make this repo available for the whole
local network, which can be useful.
3) Switch back to libdownload, which works perfectly for many users.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#11076.
1) quote the url in get_downloadclient
2) only enable nullglob where it is needed
You can see in 7fc306cd41 that nullglob was only enabled for one part, and
that it already caused other problems, which were fixed in 7ff5a917fd.
Thanks to Henning Garus for pointing out that nullglob was problematic with
urls containing expansion char like '?'.
3) change get_downloadcmd which displayed the download command line to
download_file which actually executes the download. It seems nicer that way.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Two recent commits slightly broke the translations, so this fixes all of
them.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Several pieces of information were outdated for the 3.2 release. Add a
section for the API changes between 3.1 and 3.2.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: small updates/grammar corrections]
Signed-off-by: Dan McGee <dan@archlinux.org>
The submitting patches page needed a bit of updating. It was currently a
mash-up between the pre and post git eras.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#9486.
source /etc/profile instead of all individual files in /etc/profile.d/*
(which is done by /etc/profile anyway).
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow the return code of pactest to be useful, for such things as
use in a git-bisect test script.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will enable us to mark tests we know currently fail to differentiate
them from those that we know should pass. Regressions should be easier to
spot this way.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#2334.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: add some comments to the code]
Signed-off-by: Dan McGee <dan@archlinux.org>
We had a lot of duplicated code here. The code handling the showsize option
needed to be there three times :
1) for install part of -S
2) for remove part of -S (conflict removal)
3) for -R
This patch introduce a new display_targets(pkglist, install) function which
can handle the 3 cases above. We pass install == 1 for case 1), and install
== 0 for case 2) and 3).
Now we can finally get the benefit of an old patch which handled the
ShowSize option consistently in the 3 cases above, without an awful lot of
duplicated code :
http://www.archlinux.org/pipermail/pacman-dev/2008-January/011029.html
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Something such as "pacsearch foo|bar" would cause problems due to the
quoting being dropped. Adding quotes solves the problem.
Signed-off-by: Dan McGee <dan@archlinux.org>
The pkg_dup function shouldn't call any alpm_pkg_get_ accessors because
this can fill the old package with all INFRQ_DESC fields for example, and
this won't necessarily be reproduced in the new package (for all the fields
that were copied before).
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pactree is a dependency tree viewer for installed packages.
It features both textual and graphic (through graphviz) output.
Script by: Carlo Bersani <carlocci@gmail.com>
[Allan: removed whitespace errors]
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: killed some unnecessary lines, moved license header]
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixed FS#9403. With this you can use "makepkg -sr", install the
dependencies, Ctrl+c during the makedepends installation and have
makepkg remove the installed packages on the exit. Previously makepkg
tried to also remove the makedepends which were not installed.
The deplist="" line in remove_deps is due to an obscure bug where local
varaibles from the handle_deps function seem stay in scope because we
never formally exited it.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This vercmp issue has been a sticking point but this should resolve many of
the issues that have come up. Only a few minor code changes were necessary
to get the behavior we desired, and this version appears to beat any other
vercmp rendition on a few more cases added in this commit.
This commit passes all 58 vercmp tests currently out there. Other 'fixes'
still fail on a few tests, namely these ones:
test: ver1: 1.5.a ver2: 1.5 ret: -1 expected: 1
==> FAILURE
test: ver1: 1.5 ver2: 1.5.a ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5-1 ver2: 1.5.b ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5.b ver2: 1.5-1 ret: -1 expected: 1
==> FAILURE
4 of 58 tests failed
Signed-off-by: Dan McGee <dan@archlinux.org>
With --quiet, "pacman -Sg grp" and "pacman -Qg grp" don't list group names.
Note that "pacman -Qgq" and "pacman -Sggq" (without targets) still list
group names becuase their output would not be very useful without them.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 8741908276 disabled --debug in these
cases. We just clear PM_LOG_WARNING flag now.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces a new STRIP_DIRS makepkg.conf option
to change makepkg's search path when stripping binaries.
Original work by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Debug messages were removed from _alpm_sync_find, because it is a general
purpose function; debug messages should be placed in the caller function.
I inserted "adding package foo-1.0-1 to the transaction targets" debug
message to find_replacements and sync_sysupgrade.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Our STRDUP macro (used in _alpm_depmiss_new) is NULL safe.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
So if you want to remove NULL needle from a list, alpm_list_remove will
return with "not found".
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Before removing a package from target list (in remove_prepare_keep_needed),
we should check whether we have already removed it.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 8240da6cb3 broke some alpm hierarchy
and introduced a new memleak (trans->packages was never freed in case of add
transaction, even if the transaction wasn't committed), so it is reverted
now.
We follow a different approach to reduce memory usage:
_alpm_db_add_pkgincache doesn't duplicate the whole package before adding
it to the cache, only the package name and version (INFRQ_BASE).
This method needs very small extra memory (compared to the reverted method),
and after transaction commit we use less memory than before (since the
big 'files' fields are not copied to cache), this is useful in GUIs.
Note: The old add_pkgincache was a bit broken, since pkg->origin wasn't
filled in correctly.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Acked-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This method is equivalent with pacman's resolvedeps.
$dep can be any (versioned) dependency.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
In case of error some allocated memory wasn't freed in commit_single_pkg.
Note: The return value of this function is not used.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The dynamic pmconflict_t must be freed with _alpm_conflict_free.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Using the suggestion from FS#10905, use 'svn info' rather than 'svn log' to
get the current revision number, which is much quicker for large Subversion
repositories. Eventually git will rule the world. :)
Signed-off-by: Dan McGee <dan@archlinux.org>
This presents plenty of problems on OSes besides Linux, and even on Linux
when the libtool file for libarchive isn't present. The static build isn't
all that useful anyway as missing something such as glibc will still leave
you unable to run the pacman.static binary. Remove it from the formal build
process.
Signed-off-by: Dan McGee <dan@archlinux.org>
In particular, this avoids warnings cluttering the output of these
operations.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now '-S provision' handling is done in the back-end.
In case of multiple providers, the first one is selected (behavior change:
deleted provision002.py). The old processing order was: literal, group,
provision; the new one: literal, provision, group. This is more rational,
but "pacman -S group" will be slower now. "pacman -S repo/provision" also
works. Provision was generalized to dependencies, so you can resolve deps by
hand: "pacman -S 'bash>2.0'" or "pacman -S 'core/bash>2.0'" etc. This can be
useful in makepkg dependency resolving. The changes were documented in
pacman manual.
alpm_find_pkg_satisfiers and _alpm_find_dep_satisfiers functions were
removed, since they are no longer needed.
I added some verbosity to "select provider instead of literal" and
"fallback to group".
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now "pacman -R foo" first searches for literal, and then for group.
This is faster in most cases, see:
http://www.archlinux.org/pipermail/pacman-dev/2008-July/012311.html
"-R group" implementation was broken, since alpm_grp_get_pkgs returns with
an pmpkg_t list, not a string list.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Also remove some meaningless pactests (broken requiredby, requiredby*.py
tests). requiredby001.py was renamed to upgrade076.py.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
I divided resolvedeps into 2 functions. The new _alpm_resolvedep function
will resolve one dependency, for example the 'foo>=1.0-1' dependency. It
can be useful in sync_addtarget refactoring.
The resolvedeps parameters were changed, to be coherent with recursedeps:
* the target-list is an alpm_list* instead of alpm_list**. This is OK,
because alpm_list_add == alpm_list_add_last
* syncpkg param was removed. list contains the to-be-installed packages,
resolvedeps will add the required dependencies into this list
* trans param was removed, it was used in QUESTION() only, which can be used
on the main (handle->trans) transaction only (because the front-end cannot
access our pseudo-transactions at all!).
The patch fixes some wrong dynamic pmdepmissing_t usage.
I did a behavior change (and sync1003.py was modified accordingly), which
needs some explanation: The old resolvedeps didn't elect packages from
'remove' list. I've dropped this because I don't want that 2nd excluding
list param. In fact, in real life, we ~never need this rule. Resolvedeps is
called before checkconflicts, so only -Su's %REPLACES% packages are sitting
in 'remove' list. This means, that we have the replacement packages in our
target list. Usually "foo replaces bar" means, that bar isn't in our repos
any more, so resolvedeps *cannot* elect it; but usually it won't try it at
all, because foo is in the target list, and it is expected to satisfy
'bar>=1.0-1'-like dependencies too. Since checkdeps and checkconflicts is
done after resolvedeps, this cannot cause any harm.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
PM_TRANS_CONV_INSTALL_IGNOREPKG callback function can get 2 params: foo, bar
in this order (packages), bar can be NULL.
Old API:
foo, NULL: Do you want to install foo from IgnorePkg?
foo, bar: foo requires bar from IgnorePkg. Do you want to install bar?
New API:
foo, bar: Do you want to install foo from IgnorePkg? (If bar!=NULL:) bar
requires it.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function finds the first satisfier package in a pkglist. Using it
instead of _alpm_find_dep_satisfiers eliminates some memleaks and it is
faster. (_alpm_find_dep_satisfiers and _alpm_find_pkg_satisfiers will be
removed soon.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The function is introduced to kill some code duplication. The function name
uses the 'dependency graph' terminology.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a "fix" for FS#10226. I think that multiple versioned dependencies
are quite common now, and the old behavior is quite annoying there. This
patch won't cause any slow-down.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
* change ln -s to ln -sf in the Makefile to prevent a failure when the link
already exists.
* make test_repo_db_file simpler and more natural, move the complexity out
of it.
* remove one $cmd = repo-remove check that wasn't needed
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents dangling symlinks to removed libtool files when
the !libtool option is used.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
test -e tries to resolve the link before testing, so if the link is copied
before the actual file, the script exited. This fixes the issue.
[Dan: also add some improved quoting in the script]
Signed-off-by: Carlo Bersani <carlocci@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Removes the remaining $startdir/{src,pkg} usage and adds quoting
around (hopefully) all remaining path variables
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using the stat() system call in quite a few places when we didn't
actually need anything the stat struct returned- we were simply checking for
file existence. access() will be more efficient in those cases.
Before (strace pacman -Ss pacman):
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
33.16 0.005987 0 19016 stat64
After:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
34.85 0.003863 0 12633 1 access
7.95 0.000881 0 6391 7 stat64
Signed-off-by: Dan McGee <dan@archlinux.org>
After the "shopt -s nullglob" change, all regular expressions should be
properly quoted.
This commit only fixes the ones I found, there are probably others left, so
this should be kept in mind for easier future fixing.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now makepkg can handle filenames with whitespaces in the source array.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
md5sum, sha1sum, etc, do not exist on BSD systems by default. Openssl is a
good portable alternative. This also brings in a dependency for openssl.
Closes FS#10530.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add documentation for $startdir, $srcdir, and $pkgdir variables, as well as
general information about the build() function and about custom variables
in PKGBUILDs. This addresses FS#10634.
Signed-off-by: Dan McGee <dan@archlinux.org>
They shared about 75% of their code, so there is no real reason we should
maintain them separately. Merge the differences accordingly and add a check
based on the basename of the command used to decide what behavior to follow.
Signed-off-by: Dan McGee <dan@archlinux.org>
Linux coreutils provides readlink, and BSD systems tend to have realpath
available. Both commands provide similar functionality but of course have
different names. Add a check for either and use what is available.
While doing this, also unify some of the differences that have cropped up
between repo-add and repo-remove.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch moves the generating of integrity checks to before any
error checking takes place in the PKGBUILD file. This allows integrity
generation to complete when unrelated errors exist in a PKGBUILD file
and allows the removal of multiple checks of the GENINTEG variable that
would otherwise be needed.
In addition a minor fix is made to a comment.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
On BSD systems, as super user, the 'ls' command displays all dot files by
default, causing these to get included when not intended. If we use the bash
glob operator, we can avoid issues with ls on different platforms; however,
we need to turn the nullglob shell option on first to ensure we don't have
problems in empty directories.
Originally-noticed-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This supplements the --source option and does nearly the same thing, except
downloaded source files are included in the archive as well. The sources are
now packages with a pkgname/ prefix.
Original-work-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Original work by Carlo "carlocci" Bersani with additions by
Xavier Chantry and Allan McRae
This script rebuilds an already installed package using metadata
stored into the pacman database and system files. Replaces the
outdated re-pacman script
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We used list_display() on -Sg output, which might have been slightly nicer
looking but made it much harder to parse in something like a shell script.
Reformat it in the 'grpname pkgname' format that -Qg is already using.
Signed-off-by: Dan McGee <dan@archlinux.org>
Some previous commits apparently broke the get_filename function for package
loaded with pkg_load (on a -Qip operation) because this field was no longer
filled. Now pkg_load fills it.
But the -Qip operation needs to be run like this : -Qip <filename>, so the
filename is already known. There is no need to display it again.
Besides, on a normal -Qi operation, the filename is not displayed either
because this information is not stored in the local database.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
By putting the search / group / info / list operations just after the -Sy
op, we can simplify several checks :
1) the check for "missing targets". Since we took care of the above
operations, we now have less cases to consider :
* -Syu or -Su : we can proceed
* -Sy : we can end now (this is actually a bugfix)
* -S : this op requires targets, so exit with an error
2) the check to see if a transaction is needed. If we arrive at the end of
the function, it is either because we have -Su or -S <targets> so we already
know a transaction is needed there.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Errors like the following one happen regularly (for unknown reasons...) :
error: could not open file /var/lib/pacman/local//glibc-2.7-9/depends: No
such file or directory
Anyway, every time an user reported an error like that, it always seemed
like he thought the error was caused by the double /, which is obviously
wrong.
Since db->path always include a trailing /, there is no need to add one when
concatenating paths in be_files.c or add.c.
Additionally, some static strings were switched to dynamic.
And the computation of the "dbpath"/"pkgname"-"pkgversion" was refactored
in db_read, db_write and db_remove with a get_pkgpath static function.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a new totaldlcb callback function to libalpm and make pacman utilize it
when the TotalDownload option is enabled. This callback function is pretty
simple- it is meant to be called once at the beginning of a "list download"
action, and once at the end (with value 0 to indicate the list has been
finished). The frontend is responsible for keeping track of adding
individual file download amounts to the total xfered amount in order to
display some sort of overall progress.
Signed-off-by: Dan McGee <dan@archlinux.org>
We have been using unsigned long as a file size type for a while, which
works but isn't quite correct and could easily break. Worse was probably our
use of int in the download callback functions, which could be restrictive
for packages > 2GB in size.
Switch all file size variables to use off_t, which is the preferred type for
file sizes. Note that at least on Linux, all applications compiled against
libalpm must now be sure to use large file support, where _FILE_OFFSET_BITS
is defined to be 64 or there will be some weird issues that crop up.
Signed-off-by: Dan McGee <dan@archlinux.org>
This was mistakenly referencing the LGPL even after the XySSL code bump, so
fix the license clause to be correct.
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg should not abort with error when a user uses the --nobuild option to
extract sources if a package has already been built.
Signed-off-by: Anton Fiuman <llexiw@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a new configure flag, --enable-git-version, that allows the output of
'git describe' to be used in the version string associated with this
package. This could aid in debugging for users that are using a development
version of pacman and we should be able to figure out which cut of code they
are using.
Sample output:
$ pacman --version
Pacman v3.1.4-190-g4cfa-dirty - libalpm v2.3.1
$ makepkg --version
makepkg (pacman) 3.1.4-190-g5861-dirty
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 8428367285 introduced the regression,
and a previous commit introduced the vercmptest.sh test script to track down
these issues. This commit solves the problem by removing the previous
attempt at locating the pkgrel portions and replacing it with something that
performs the correct logic.
While tracking down everything I needed to, I also found a mistake in one of
the pactests which is fixed here as well as increased the functionality and
verbosity of the vercmptest script to both print out each test it is running
as well as automatically run the mirror of each test case.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 8428367285 updated the versioncmp code
in libalpm. Unfortunately for us, it also introduced the regression that
becomes apparant with the following upgrade:
warning: sonata: local (1.5-2) is newer than extra (1.5.1-2)
Add a vercmptest.sh test script that is run during the make check phase
which now points out three regressions in the version comparison function
that will need fixing. All current tests in this script pass with the old
versioncmp code.
Signed-off-by: Dan McGee <dan@archlinux.org>
If we don't set the pkgname var to NULL, we run into all sorts of beautiful
segfault behavior when a group spans multiple repositories and we try to
print out the location of the former list. Easy fix.
This regression was introduced in bf86700369.
Signed-off-by: Dan McGee <dan@archlinux.org>
Removed unused handle->uid from pmhandle_t. The need to check permissions
should be determined by the frontend (and is in pacman).
Fixed comment on noextract in pmhandle_t.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This event was unused, was missing the equivalent EXTRACT_DONE event, and
was useless because we already have ADD / UPGRADE START and DONE events.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
repo-add and db_read both assume that REPLACES and FORCE fields are in the
desc file, so do that for db_write as well (instead of depends file).
Note that db_write is currently only used on the local database. And the
only purpose of replaces and force in local database is for information
purpose (available on -Qi operations). So this is not a big problem.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-May/011859.html
Acked-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch removes the code block in makepkg that checked for depreciated
options in a PKGBUILD and provided a workaround. Unknown and depreciated
options are upgraded to error conditions.
Also, removed TODO regarding including install script if exists and $install
is unset. That should never happen.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Name and version are computed from "/var/lib/pacman/..." pathname. And the
%NAME% and %VERSION% fields from the desc file were not even read. So now,
when we read the desc file, we make sure the %NAME% and %VERSION% fields are
consistent.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In the case of -Rs operation, first pulling the dependencies with
recursedeps before calling checkdeps takes care of the dependency chain of
remove052 pactest.
In the case of -Rcs, we can keep the old behavior because we have no problem
there (any dependency returned by checkdeps will be added to the remove list
because of -Rc) and we have to run recursedeps on the final remove list
anyway to catch all orphans.
Ref.: http://www.archlinux.org/pipermail/pacman-dev/2008-April/011569.html
Signed-off-by: Nagy Gabor <ngaba at bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds a test for when removing multilpe packages recursively from a
chain of dependent packages. This situation can occur when removing
installed dependencies with makepkg if a "makedepend" recursively depends on
a "depend" or if redundant dependancies are included.
Signed-off-by: Allan McRae <mcrae_allan at hotmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Catches error from when pacman is unable to remove dependencies after
successfully building package and prints warning. Fixes FS#10039.
Signed-off-by: Allan McRae <mcrae_allan at hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
On BSD systems using a dot as a separator is not allowed. On Mac OSX it
is deprecated. A colon should be used instead. BSD systems also use the
"wheel" group instead of "root" to indicate the "super user" group. Both
groups use the id of 0.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Acked-by: Aaron Griffin <aaronmgriffin@gmail.com>
Acked-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
For some reason `file` on Mac OSX has different arguments than BSD and
Linux; -i no longer prints out the mime strings. With the environment
variable COMMAND_MODE set to "legacy", `file` behaves more like it does
on Linux and BSD, i.e., `file -i` prints the mime type.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Acked-by: Dan McGee <dan@archlinux.org>
Acked-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When fakeroot was not in BUILDENV and the user was not root, makepkg still
tried to use fakeroot for building packages.
BUILDENV is now checked to see if fakeroot is enabled. If it is not enabled the
package can still be built, but root will not have ownership of files. This is
useful when users want to make packages for personal use and don't care about
ownership.
Closes FS#10450.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#10459.
There is apparently no portable ways to get the apparent size of a file,
like du -b does. So the best compromise seems to get the block size in kB,
and then convert that to byte so that we keep compatibility.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The "-s" argument does not exist on BSD, and neither does
"--remove-destination". This patch replaces the calls to "cp -s
--remove-destination" with the equivalent "rm -f" and "ln -s" calls, in
order to increase portability.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is one of those rare cases where we actually want to code in a
platform-specific #ifdef. Because you don't need to be the root user on a
Windows box, and fakeroot doesn't exist so we can do easy testing, lets
disable any checking of the UID.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Only use fakeroot and fakechroot when they are found AND required.
fakechroot only had the first condition, and fakeroot only the second.
When they are required (user != root) but not found, display a warning.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Actually, just rename _alpm_versioncmp to alpm_pkg_vercmp and get rid of the
need for a wrapper since it did nothing anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
This code hasn't been looked at in some time. I grabbed a more recent
version of the RPM source (4.4.2.3) and attempted to sync up any changes
they have made, as well as make the libalpm additional code much cleaner and
limited to only a few added lines of code.
The size of this patch might make you think we added code, but bloat-o-meter
actually tells us otherwise:
<function> <old> <new> <diff>
_alpm_versioncmp 1485 1021 -464
Signed-off-by: Dan McGee <dan@archlinux.org>
Any real call of this function doesn't specify a name or version ahead of
time, so just kill that functionality off. Now to remove those dummy
packages...
Signed-off-by: Dan McGee <dan@archlinux.org>
If we have a package without name and/or version, we are really out of luck.
Speed these functions up by removing unnecessary code. Note that both the
splitname and pkg_load functions, where the name and version of packages are
initially populated for databases and pkg.tar.gz files respectively, enforce
that every new package struct created has a name and version.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 0460038447 caused a regression when
rereading the pkgcache after updating the on-disk databases. A rewinddir
call was errantly removed.
Instead of replacing the call to rewindir, clean up this whole mess.
db_scan is used only once and with target == NULL so there was actually half
the code of db_scan which was unused. This is gone now and replaced by a
single new db_populate function.
Dan: add_sorted ended up being 3x slower than one msort at the end, so I
changed back to that. I also made one pointer variable const and merged this
whole patch with my original fix for the rewinddir issue.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This has been around since at least pacman 2.9.8. Frugalware just dumped it
in commit 113ec73bfcfdc, and deleting it here and running pactest shows that
nothing that we have actually tested changes. If someone can pactest the
edge case where this is needed, then show me the money.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch offers a way to fix FS#9228.
By putting "SyncFirst = pacman" in pacman.conf, the version check will
happen before the transaction really starts, and before any replacements is
made.
Otherwise, no version check is done.
The sync301 pactest was updated to use this SyncFirst option.
Example session with SyncFirst = pacman, and a newer pacman version
available :
$ pacman -Su (or pacman -S <any targets>)
:: the following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n]
resolving dependencies...
looking for inter-conflicts...
Targets: pacman-x.y.z-t
Total Download Size: x.xx MB
Total Installed Size: x.xx MB
Proceed with installation? [Y/n] n
As Nagy previously noted, doing this check on any -S operations might look
intrusive, but it can be required.
For example, the case where you want to install a package with versioned
provisions, using a pacman version which didn't support that feature yet
(and there is already a newer pacman in sync db supporting it).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* remove obsolete and unused *_cmp helper functions like deppkg_cmp and
_alpm_grp_cmp
* new alpm_list_remove_str function, used 6 times in handle.c
* remove _alpm_prov_cmp / _alpm_db_whatprovides and replace them by
a more general alpm_find_pkg_satisfiers with a cleaner implementation.
before: alpm_db_whatprovides(db, targ)
after: alpm_find_pkg_satisfiers(alpm_db_getpkgcache(db), targ)
* remove satisfycmp and replace alpm_list_find + satisfycmp usage by
_alpm_find_dep_satisfiers.
before : alpm_list_find(_alpm_db_get_pkgcache(db), dep, satisfycmp)
after : _alpm_find_dep_satisfiers(_alpm_db_get_pkgcache(db), dep)
* remove _alpm_pkgname_pkg_cmp, which was used with alpm_list_remove, and
use _alpm_pkg_find + alpm_list_remove with _alpm_pkg_cmp instead.
This commit actually get rids of all complicated and asymmetric _cmp
functions. I first thought these functions were worth it, be caused it
allowed us to reuse list_find and list_remove. But this was at the detriment
of the clarity and also the ease of use of these functions, dangerous
because of their asymmetricity.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now the syntax is coherent with alpm_list_find and alpm_sync_find.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_pkg_load() and parse_descfile() are specific to getting information
from package files, just as other code is specific to getting information
into or out of a package database. Move this code out of package.c, which
should eventually only contain operators on the pmpkg_t struct that do not
depend at all on where the data came from.
Signed-off-by: Dan McGee <dan@archlinux.org>
We have some useless abstractions like an alpm_db_rewind function. I've read
somewhere that readdir() was the worst filesystem function call invented,
and what do we do? Add a wrapper around it. Kill this abstraction and move
some other things into be_files that should be there anyway because they
are so tied to how a files backend works.
Signed-off-by: Dan McGee <dan@archlinux.org>
Tested using many easily generated error conditions. Also added "malloc
failure" (conf.c) and "segmentation fault" (pacman.c) error messages for
translation.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
[Dan: fix trailing whitespace errors, other compilation issues]
Signed-off-by: Dan McGee <dan@archlinux.org>
It was unclear what "loading the full package" actually did. The
detailed description should clear that up, without having to look at the
code.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The paclist script provides a simple method for monitoring which packages
are installed from a given repo. This is particularly useful when using a
testing or unstable repository.
Thanks to Allan McRae for the idea and an initial bash script. As suggested
by Dan, I tried to rewrite in perl, and this resulted in much better
performance. Then Dan further cleaned up the script.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: add to Makefile & README, minor script cleanups]
Signed-off-by: Dan McGee <dan@archlinux.org>
This rewrite in perl blows the socks off the old shell script version for
large searches:
$ time ./pacsearch.perl ^.*$ >/dev/null
real 0m0.836s
user 0m0.593s
sys 0m0.217s
$ time pacsearch.sh ^.*$ >/dev/null
real 1m53.818s
user 1m16.818s
sys 0m33.694s
Functionality and output is identical to the old version with the exception
of the old version's missing EOL after all the output. It should be a lot
easier to add new things like the --color flag that has been a TODO at the
top of the script for a long time.
Signed-off-by: Dan McGee <dan@archlinux.org>
The start of a few commits to remove some PATH_MAX usage from our code. Use
a dynamically allocated string instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
They are pretty noisy scripts in their normal course of operations, so allow
all messages to be squashed except for warning and error messages with this
new flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
I've always found it odd why the package version is shown at the start but
not the end of the package build. Fix it, and while we are at it, add the
$CARCH variable to the display too.
Signed-off-by: Dan McGee <dan@archlinux.org>
We only need a copy of this string once we know we are going to extract it,
and we don't need a static buffer to copy it into since it is coming from a
known-length string.
Signed-off-by: Dan McGee <dan@archlinux.org>
XySSL 0.9 was released; sync our code with the upstream source. Note that
there weren't any real changes besides renaming of macros, so nothing much
to see here.
The biggest change may be the licence- it is now GPL/BSD software rather
than LGPL/BSD. The license header is changed to reflect this.
Signed-off-by: Dan McGee <dan@archlinux.org>
From http://www.stack.nl/~dimitri/doxygen/config.html#cfg_javadoc_autobrief
JAVADOC_AUTOBRIEF
If the JAVADOC_AUTOBRIEF is set to YES then doxygen will interpret the
first line (until the first dot) of a JavaDoc-style comment as the brief
description. If set to NO (the default), the Javadoc-style will behave just
like regular Qt-style comments (thus requiring an explicit @brief command
for a brief description.)
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
It is hard to decipher what the transaction events actually notify you
of, and what parameters are passed to the callback function, without
looking at the code. This patch adds documentation for the _pmtransevt_t
enum in order to clarify what the event is for and what data is passed
when the callback is called.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Rework to use a single #define for the buffsize, and in the process clean up
some other code and double the default buffer size.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were a bit juryrigged using one call to mkstemp() before rather than
extracting the new files side-by-side and doing our comparisons there. We
were also facing some permissions issues. Instead, make our life easier by
extracting all temp files to a '.paccheck' extension, doing our md5
comparisons, and then taking the correct actions.
Still to be done here- a cleanup of the use of PATH_MAX which should not be
necessary if we use dynamic allocation on the heap.
Signed-off-by: Dan McGee <dan@archlinux.org>
This should allow some future tests to set modes and ensure they are set
after installation. It is also in anticipation of a test for checking
permissions on pacnew files.
Signed-off-by: Dan McGee <dan@archlinux.org>
I'm not sure why these were ever here, as by this point we have already
extracted the file meaning a call to this function is basically a no-op.
Signed-off-by: Dan McGee <dan@archlinux.org>
Inside tidy_install, change the section which strips libraries to use find |
while read rather than for foo in `find`. This should allow whitespaces in
filenames to still be processed correctly.
This fixes FS#10294.
Signed-off-by: Daenyth Blank <Daenyth+git@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We removed one too many FREELIST() calls when trying to fix some memleaks,
and add a safety/sanity check to ensure filename is set, as packages in old
DBs are likely to not have this field.
Signed-off-by: Dan McGee <dan@archlinux.org>
Reference : FS#9547.
The get_filename function first tries to get the filename field from the
database, and if it doesn't find it, it tries to guess it based on the name,
version and arch.
This field was introduced in 3.0, but there are still many old entries in
the official databases without it. So the databases need to be regenerated
first before this patch can be applied.
There is a second problem with the delta code, which needs the filename for
locally installed packages too, but this field is not present in the local
db. So the delta code needs to be fixed first.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
As Nathan noticed, the new informations in the delta struct allows us to
get rid of this list :
http://www.archlinux.org/pipermail/pacman-dev/2008-February/011163.html
So I rewrote apply_deltas for that. The previous apply_deltas also had a
limitation: it assumed that the initial package and the deltas were in the
first cache dir, which is not necessarily the case. That situation is
supported now.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Using the graph structures that Nagy set up for dependency sorting, we now
do a similar process for deltas. Load up all of the deltas into a graph
object on which we can then apply Dijkstra's algorithm, using the new weight
field of graph struct.
We initialize the nodes weight using the base files that we can use in our
filecache (both filename and md5sum must match). The algorithm then picks
the best path among those that can be resolved.
Note that this algorithm has a few advantages over the old one:
1. It is completely file agnostic. These delta chains do not have to consist
of package files- this could be adopted to do delta-fied DBs.
2. It does not use the local_db anymore, or even care if a package or file
is currently installed. Instead, it only looks in the filecache for files
and packages that match delta chain entries.
Original-work-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Start to move the delta struct away from an assumed package name scheme and
towards something that is package (or even filename) agnostic. This will
allow us much greater flexibility in the usage of deltas (maybe even sync
DBs some day) as well as allowing code outside of delta.h/delta.c to be much
cleaner with less of a need for snprintf() calls.
Signed-off-by: Dan McGee <dan@archlinux.org>
The calls to alpm_trans_init and alpm_trans_release (+ error checking) were
duplicated between remove.c, sync.c and upgrade.c
This patch introduces trans_init and trans_release functions in util.c to
have this code just once.
So instead of having to do the same change 3 times for fixing FS#10273, I
just had to do it once (so I did it too :))
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In the can_remove_package function, we don't need to compute the whole
requiredby list, we just need to find one member of it that doesn't belong
to the targets list.
That way we get a small speedup and remove the only usage of
alpm_pkg_compute_requiredby in the backend, so that it can be tweaked for
frontend usage.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This should remove the need for any additional patching to run on platforms
that have libfetch available but not libdownload. It isn't the prettiest,
but we have kept our libdownload impact down to just a few files, so it can
be easily done.
Signed-off-by: Dan McGee <dan@archlinux.org>
free() is designed to do nothing if it is passed a NULL pointer, so there is
no need to check for it on our end. Change/fix the macro.
Signed-off-by: Dan McGee <dan@archlinux.org>
Previously, tar was called manually with os.system. This caused one fork per
package/db creation, which is costly, especially on cygwin. Besides, it also
caused some problems with directory with whitespaces (that could also be
fixed with quotes, but well..)
Using tarfile module is cleaner and more efficient, and still easy enough.
Benchmark (time make check) :
- windows / cygwin
prepatch:
real 6m36.360s
user 2m28.914s
sys 2m35.866s
postpatch:
real 5m25.428s
user 1m26.029s
sys 2m0.006s
- linux
prepatch:
real 1m22.629s
user 0m31.498s
sys 0m18.899s
postpatch:
real 1m11.465s
user 0m26.382s
sys 0m12.986s
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Darwin's binary format does support symbols with differing visibilities, but
it does not support the protected or internal visibilities- only hidden. For
Darwin only, we should fall back to this visibility to prevent warnings from
the compiler and because it is close enough for our library purposes.
See http://gcc.gnu.org/viewcvs/*checkout*/trunk/gcc/config/darwin.c, search
for the "darwin_assemble_visibility" function for more details.
Also add pacman.static.exe to gitignore.
Signed-off-by: Dan McGee <dan@archlinux.org>
Linux includes all the gettext stuff in glibc, so there is no need for the
libintl links which we failed to include in our linker variables. Update the
makefiles which should enable NLS support on all platforms, including OS X
and Cygwin.
Signed-off-by: Dan McGee <dan@archlinux.org>
Things must have gotten stricter with GCC 4.3 on the '%zd' printf string and
this is the first I've tried to compile there. Fix the problem by using
size_t instead of int.
Signed-off-by: Dan McGee <dan@archlinux.org>
Pulled two loops out of _alpm_remove_prepare and gave them their own
functions.
Signed-off-by: K. Piche <kevin@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We no longer expose any of libdownload in our public functions, so no need
to include this header anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
There were a few issues with this code:
1. We already had an open fd to a file, but never used it to our benefit.
Use the libarchive convienence method to write the current file contents
straight to a file descriptor.
2. The real problem cropped up on Windows where the locking semantics caused
the old way of extraction to fail because we had an open file descriptor.
By using the file descriptor and closing it ASAP, we prevent these
failures.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove a few functions and things that were unnecessary, update the help
line calls to the current function name, and make the small change to
pacman.c for the signal handler return type that is defined in config.h.
Signed-off-by: Dan McGee <dan@archlinux.org>
We use this function once in our codebase, but fortunately the workaround is
relatively easy. swprintf() is not available on Cygwin so the compile failed
there, but we can do a series of mbstowcs() calls that produce the same end
result as the swprintf() call.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a new --disable-internal-download flag to configure allowing the
internal download code to be skipped. This will be helpful on platforms that
currently don't support either libdownload or libfetch (such as Cygwin) and
for just compiling a lighter weight pacman binary.
This was made really easy by our recent refactoring of the download code
into separate internal and external functions, as well as some error code
cleanup.
Signed-off-by: Dan McGee <dan@archlinux.org>
If we specify -q/--quiet on an --owns operation, only print a matching
package name rather than the verbose human-readable message.
Signed-off-by: Dan McGee <dan@archlinux.org>
From 41cc28f560bf9843d81ce5fb62b884b6325d06a0 Mon Sep 17 00:00:00 2001
From: Allan McRae <mcrae_allan@hotmail.com>
Date: Sun, 6 Apr 2008 22:18:06 +1000
Subject: [PATCH] Quote filenames in find expression in pacdiff
Small patch to allow pacdiff to run in /etc. See FS#10090.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Also fix a broken contrib/ Makefile, found with make distcheck. I also let
the little translation linebreak update slip in here as it was small enough
not to be a big deal, and this should just prevent it from happening again
later anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
We correctly closed the logfile stream when recalling set_logfile, but did
not NULL out the dead pointer once we did this. Fix the problem which was
the cause of FS#10056.
Signed-off-by: Dan McGee <dan@archlinux.org>
This update causes query003 to fail before commit
4b8ada818e. Hopefully the issue doesn't crop
up again but we might as well test for it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Not too complicated of a fix, but just adds some code to loop over the
entire group list and space it out.
Signed-off-by: Dan McGee <dan@archlinux.org>
This segfault creeped in as a result of commit bf867003. We were incorrectly
assuming the group member of our package was a pmgrp_t list when in fact it
is just a string list, which caused a segfault on any -Qs operation.
Also slightly cleanup the -Ss code (which was originally correct unlike the
-Qs code).
Signed-off-by: Dan McGee <dan@archlinux.org>
After the libarchive upgrade from 2.4.12 to 2.4.14, our usage of
archive_entry_pathname became dangerous. We were using the result of that
function even after calls to archive_entry_set_pathname.
With 2.4.14, the entryname becomes wrong after these calls, and so all the
future use of entryname are bogus. entryname is used quite a lot for
logging, so that's not so bad. But it's also used for the backup handling,
so that's not very cool. For example, reinstalling a package with backup
entries will erase all the md5 entries from the DB, because they won't be
found back.
entryname is now a static string so that we can easily keep the result of
archive_entry_pathname.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: fixed version numbers in commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
This should be a notable speed-up (apart from kernel cache).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
With the addition of the archive_fgets() function, we can now skip the temp
file usage in pkg_load/parse_descfile that was not needed. This has a nice
benefit of probably being both faster, reducing code, and getting rid of
"expensive" file operations.
Signed-off-by: Dan McGee <dan@archlinux.org>
This crude function allows reading from an archive on a line-by-line basis
similar to the familiar fgets() call on a FILE stream. This is the first
step in being able to read DB entries straight from an archive.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch should avoid duplicated target names in the backend.
1. sync_loadtarget will return with PM_ERR_TRANS_DUP_TARGET when trying to
add a duplicated target
2. sysupgrade never pulls duplicated targets
3. resolvedeps won't pull duplicated targets anymore
A pulled list was introduced in sync_prepare to improve the
pmsyncpkg_t<->pmpkg_t list conversion by making it more direct.
Also replace sync1005 and sync1006 by the sync1008 pactest, which is
similar but more interesting (the provisions are dependencies instead of
explicit targets).
sync1005 didn't work as expected anyway. It was expecting that pacman
failed, and pacman indeed failed, but not for the good reason. It didn't
fail during the preparation step because of conflicting targets, but during
the commit step, because of a md5 error...
And sync1006 didn't pass and was not really worth fixing. We have already
enough failing pactests more important than these two.
sync1008 pass with this patch.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
In the file:// download case, we didn't free the return from get_destfile()
after we were done with it. Fix it. (Found with xfercommand001.py)
Signed-off-by: Dan McGee <dan@archlinux.org>
The _alpm_backup_split function always alloced memory for the fname, and we
let it disappear in a specific case (upgrade026.py). Fix the issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gets rid of a lot of the unnecessary verbosity in the --valgrind output
when running all the tests. It should also make diff-ing output between test
runs a lot easier.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will reduce the need for running an -Syy if the DB was only
half-extracted, as the mtime won't get updated until the new database is
completely in place.
Signed-off-by: Dan McGee <dan@archlinux.org>
As it was already mentioned several times, the new -Sc behavior in 3.1 is
great, but only when the package cache is not shared.
This option has two possible values : KeepInstalled and KeepCurrent
With KeepCurrent, -Sc will clean packages that are no longer available in
any sync db, rather than packages that are no longer in the local db. The
resulting behavior should be better for shared cache.
Ref :
http://www.archlinux.org/pipermail/pacman-dev/2008-February/011140.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
in PKGBUILD.proto, we have the following line
md5sums=() #generate with 'makepkg -g'
if we add a md5sum inside quotes, or even just the quotes :
md5sums=('') #generate with 'makepkg -g'
the highlighting will be totally messed up.
Adding the keepend keyword fixes this.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
These case insensitive comparisons didn't work in some locales, like tr_TR
where upper(i) != I. So a second case sensitive comparison had to be made
for each directive.
Only keeping case sensitive comparisons make the code cleaner and treat all
locales equally.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011445.html
Also fix pactests to use the correct case.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
All other steps in tidy_install function were already controlled by an
option in makepkg.conf, so this patch adds an option for the man page
compression step too.
This will allow to keep man pages uncompressed, which is required for some
special meta man page, like the zshall one (see FS#4580).
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011472.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
* -Rss removes all dependencies (including explicitly installed ones).
* updated documentation
* two pactest files added to test the difference between -Rs and -Rss
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
If we had :
arch=(fake)
The fake string would be highlighted because it's invalid.
But if we had :
arch=('fake')
it didn't work.
Fix this for both arch and license arrays.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Its implementation was quite broken:
* add_loadtarget() might have silently filtered out some targets when
replacing an older version.
* This was used in sync.c to determine whether a target is implicit or not,
which is incorrect behavior. Before this patch we silently removed user
confirmed replacements; now we always warn on a replacement.
* remove001.py behavior was quite odd in adding same target 5 times to the
target list, we can change this behavior to be a failure.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: changed remove001 pactest accordingly]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: rewrote commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
Download to *.part and remove the suffix if successful, thus md5sums will be
checked only for complete files, and next time makepkg will resume
downloading of partial file instead of complaining about invalid md5sums.
Old DLAGENTS format is still supported.
Late fix: Do not try to download %u first
The output of grep was not suppressed, thus the output of get_downloadcmd
was wrong because of extra line at the beginning that contained an
unsubstituted (with %o and %u) entry from DLAGENTS.
Signed-off-by: Roman Kyrylych <roman@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This should be the main step in the download refactoring initiated by commit
81a2a06818.
The stub functions introduced by that commit were implemented.
The big download code was mostly composed of two steps, and so it has been
naturally splitted in two functions : download_external and download_internal
file:/// urls are now handled manually, instead of forcing the use of the
internal downloader.
Thanks to Dan for fixing the remaining issues and cleaning up the patch :)
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This function was used in two different ways :
- as a signal handler : the argument was the signal number
- called manually for freeing the resources : the argument was the return
value
So the first part is now handler(int), and the second cleanup(int).
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011388.html
Remaining problems :
- the return values are messy. for example, 2 can mean both that it was
interrupted (SIGINT == 2), or that --help or -V was used (returned by
parseargs).
- apparently signal is not portable and sigaction should be used instead
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
There is no need to put the list of files in there, which will get outdated
sooner or later. It's possible to generate the filelist in the plugin itself
using \r.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: add scripts/ directory]
Signed-off-by: Dan McGee <dan@archlinux.org>
This hasn't been updated in forever, and a simple python program could
regenerate it anyway. Or even grep.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the pacman_upgrade stub function to do what pacman_add used to do so
we can eliminate pacman_add. Move the code to the more-descriptive name of
upgrade.c.
Note that we have made no changes to the backend libalpm, where an ADD type
transaction could still be supported.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is in anticipation of removing the -A/--add option from the pacman
frontend. I've went through each of the pacman pactests that used the -A
operation and decided whether they were worth keeping, whether there was
already an upgrade test doing the same thing, or whether it should be moved
over.
The GIT rename log should make several of the moves obvious, but for those
that were deleted:
add001: handled by upgrade004
add002: worthless
add004: worthless
add010: handled by upgrade011
add050: handled by upgrade010
Signed-off-by: Dan McGee <dan@archlinux.org>
Now pacman frontend uses this function instead of the compile-time libalpm
version number.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: fix one more spot where LIB_VERSION was used]
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 49197b7492)
This comment was created for the old provision version format and needless.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Hopefully the last of the huge commits ever. This also adds the c-format tag
to all of the translated messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
We only had one string change, and just a newline, so we can actually make
this update in its own commit rather than updating pacman.pot and making a
huge number of line changes, and then letting every translator do this
newline fix separately.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The issue was discussed in this thread on the mailing list:
http://archlinux.org/pipermail/pacman-dev/2008-March/011324.html
In addition, the GNU gettext manual states that translation encoding is
completely separate from the encoding used by the users of the translation.
It makes sense for our project to use UTF-8 for all translations, regardless
of the preferred encoding used by users of a certain language. This allows
all contributors to more easily edit a translation file if necessary and not
have to worry about codepage issues.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add optdepends keyword
* license, backup and arch keywords should be arrays
* Remove the little hack to color conflicts/provides/replaces keyword even
without =(). These should be arrays too.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Now pacman frontend uses this function instead of the compile-time libalpm
version number.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: fix one more spot where LIB_VERSION was used]
Signed-off-by: Dan McGee <dan@archlinux.org>
* mainly code cosmetics (indent fixes)
* remove debug message "spam"
* print also user friendly result
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: a few more whitespace/linebreak cleanups added]
Signed-off-by: Dan McGee <dan@archlinux.org>
test_delta_md5sum and test_pkg_md5sum were simple wrappers to test_md5sum,
and only used once, so not very useful. I removed them.
Also, test_md5sum and alpm_pkg_checkmd5sum functions were a bit duplicated,
so I refactored them with a new _alpm_test_md5sum function in libalpm/util.c
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
I screwed up originally when I accepted the TotalDownload patch,
8ec27835f4. I didn't realize how deeply it
modified libalpm and I probably shouldn't have let it do what it did. This
commit reverts much of what that patch added in order to clean up our
internal function calls. We can find another way to do it right down the
road here but for now it has to go.
Signed-off-by: Dan McGee <dan@archlinux.org>
Using c-format on every strings allowed me two found two broken ones.
One was harmless, but the other caused a segfault, as reported in FS#9658.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Currently xgettext apparently attempts to autodetect c format strings (eg a
string with a %s) to decide whether to use c-format flag or not.
If we use --flag=_:1:c-format instead of --flag=_:1:pass-c-format, the
c-format will be applied everywhere.
I couldn't find this documented anywhere though. But the pass prefix is
mentioned here :
http://www.gnu.org/software/gettext/manual/html_node/xgettext-Invocation.html#xgettext-Invocation
"Specifies additional flags for strings occurring as part of the argth
argument of the function word. The possible flags are the possible format
string indicators, such as ‘c-format’, and their negations, such as
‘no-c-format’, possibly prefixed with ‘pass-’."
And c-format is documented there :
http://www.gnu.org/software/gettext/manual/html_node/c_002dformat-Flag.html#c_002dformat-Flag
"This situation happens quite often. The printf function is often called
with strings which do not contain a format specifier. Of course one would
normally use fputs but it does happen. In this case xgettext does not
recognize this as a format string but what happens if the translation
introduces a valid format specifier? The printf function will try to access
one of the parameters but none exists because the original code does not
pass any parameters."
And that's exactly what happened with FS#9658.
So using c-format for every string will prevent this issue from happening
again.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Remove what was a pretty weird abstraction in the libalpm backend. Instead
of parsing server URLs as we get them (of which we don't usually use more
than a handful anyway), wait until they are actually used, which allows us
to store them as a simple string list instead. This allows us to remove a
lot of code, and will greatly simplify the continuing refactoring of the
download code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add new stub functions that work by calling the existing (terrible) download
forreal function, which needs a serious overhaul. Hide the existing
functions and switch all former users to the new functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first in what will be a series of patches to clean up the
current download code in libalpm. Start by moving download code out of
server.c and into download.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a preset paramater to yesno function saying which answer should be the
default. Ref:
http://www.archlinux.org/pipermail/pacman-dev/2007-June/008470.html
This allows us to answer no by default to some questions, like the -Scc one
mentioned in the above thread, and implemented by this patch.
Another advantage is that we don't have to repeat the [Y/n] in every
questions. It's only put once in yesno function. This highly reduces the
chances that YES and NO strings are translated, but not some questions,
which lead to obvious confusions.
Finally, the noconfirm variable only needs to be used in that yesno
function. So all other usages of it were removed.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
* Remove some #include statements that are not strictly necessary
* Remove node_new function that is really just a one-liner
Signed-off-by: Dan McGee <dan@archlinux.org>
* Introduces 'list == NULL' convention for empty list. That means
alpm_list_new isn't needed anymore, so kill it
* Small straightforward fixes in alpm_list.c
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The header of that file already stated that only current translators were
listed in that file. So there is no need to mark the current translators
with a star, I just removed the old ones instead (all history of that file
is kept in git anyway).
Current translators = all translators who contributed to 3.1.x translations.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
After a merge with master where some strings we print (such as descriptions)
could be NULL, a few segfaults popped up due to strlen() calls on null
pointers. Fix this by doing some preemptive checks and returning from
functions early if the string was null.
Signed-off-by: Dan McGee <dan@archlinux.org>
Both alpm_logaction() and yesno() are vararg functions, so we might as well
use this functionality and take advantage of it. Remove all of the
snprintf() calls and the LOG_STR_LEN constant that never seemed quite right.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix up the indentprint and list printing functions so they work properly.
This output can be seen in places such as -Ss, -Si, -Qs, and -Qi.
Signed-off-by: Dan McGee <dan@archlinux.org>
Due to the addition of the Chinese translation, our column widths were all
messed up as mentioned in the download progress commit fixing this same
problem there. This is a port of the code and ideas from that fix to the
installation progress bars. Once again, a handful of examples were tested to
ensure we work in all locales and with varying byte and char widths.
English (before & after):
(1/1) checking for file conflicts [-----------------] 100%
(1/1) upgrading man-pages [-----------------] 100%
German (before & after):
(1/1) Prüfe auf Dateikonflikte [-----------------] 100%
(1/1) Aktualisiere man-pages [-----------------] 100%
Chinese (before):
(1/1) 正在检查文件冲突 [-----------------] 100%
(1/1) 生在升级 man-pages [c o o o o o ] (1/1) 生在升级 man-pages [----------C o o ] (1/1) 生在升级 man-pages [-----------------] 100%
Chinese (after):
(1/1) 正在检查文件冲突 [-----------------] 100%
(1/1) 生在升级 man-pages [-----------------] 100%
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that we have a Chinese translation, all of the problems with new
character sets crop up. Assumptions were made in the past that all
characters occupied one column, which is not true with a Chinese character
set. In addition, the download code even failed on such things as 'ö', which
is two bytes wide but only 1 column.
This code will need to also be ported to the add/remove/upgrade/conflicts
progress printouts.
Note that the tests below try to incorporate a number of things:
1. download filenames too long to fit
2. download filenames cut off in the middle of a multibyte sequence
3. download filenames incorporating multicolumn chars
4. download filenames incorporating multibyte, single-column chars
5. 'plain' download filenames that have always worked
Before:
:: 正在同步软件包数据库……
正在解决倚赖��... 0.0K 199.8K/s 00:00:00 [-----------------] 100%
错误：无法升级正在解决倚赖关系junköëjunköëjunköëäää (未预计的系统错误)
正在解决倚赖��... 0.0K 308.4K/s 00:00:00 [-----------------] 100%
错误：无法升级正在解决倚赖关系 (未预计的系统错误)
junköëä 0.0K 390.6K/s 00:00:00 [-----------------] 100%
错误：无法升级junköëä (未预计的系统错误)
pacman-git 0.5K 4.3M/s 00:00:00 [-----------------] 100%
本地数据库已是最新的
After:
:: 正在同步软件包数据库……
正在解决倚赖关系jun... 0.0K 89.7K/s 00:00:00 [-----------------] 100%
错误：无法升级正在解决倚赖关系junköëjunköëjunköëäää (未预计的系统错误)
正在解决倚赖关系 0.0K 147.7K/s 00:00:00 [-----------------] 100%
错误：无法升级正在解决倚赖关系 (未预计的系统错误)
junköëä 0.0K 156.9K/s 00:00:00 [-----------------] 100%
错误：无法升级junköëä (未预计的系统错误)
pacman-git 0.5K 1515.9K/s 00:00:00 [-----------------] 100%
本地数据库已是最新的
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to remove the sync_only flag, and also do the following
steps in the future :
1) refresh the database (if asked)
2) do other stuff (eg checking if a newer pacman version is available)
3) start the actual transaction
Currently when we detect a newer pacman version, we have to release the
current transaction and start a new one.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This partly fixes FS#9609.
Weird things could happen when running -Sc while another instance was
already running. The cleancache function could delete packages that were
just being downloaded.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Factorize these two functions to avoid code duplication, especially since
they could be used for locking the database during -Sc and -Sy operation
too.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
FS#9609 brought up an interesting issue where a user was prompted to remove
db.lck when running a -Sc operation concurrently with an -Syu operation
during a long download. Although there are other problems here, this fixes
the issue where files other than directories could be considered to be
databases. Fix this.
Signed-off-by: Dan McGee <dan@archlinux.org>
Address the issue of our scripts not working so great when gettext is not
available. This has come up in multiple bug reports, and is relatively easy
to address by adding a simple check and a stub function if gettext was not
found that simply echos the original message.
Addresses concerns from FS#9214 and FS#9607.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#6437. Dan already explained the problem in that bug report.
Instead of letting printf deal with the length of utf8 strings, we can
handle it more explicitly in the case of conflict progress bar, just like we
do for add/remove progress bars. We compute the remaining space left for
displaying the pkgname in case of add/remove, and an empty string in case of
conflict.
Before :
(1/1) Prüfe auf Dateikonflikte [###################] 100%
(1/1) Aktualisiere rxvt-unicode [###################] 100%
After :
(1/1) Prüfe auf Dateikonflikte [###################] 100%
(1/1) Aktualisiere rxvt-unicode [###################] 100%
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Arch no longer installs Gnome here, and we should be stripping any doc dirs
in /opt anyway, so generalize it. Fixes FS#9597.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow us to utilize this helpful type and functions in places
besides dependency calculations. In addition, remove the public declaration
of pmgraph_t in alpm.h- there is zero need to expose this internal type.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step of fixing FS#9547. This should not break any existing
code that may rely on this function behaving the way it did, and should be
good for inclusion in a maint release.
In addition, update pactest so it fills the FILENAME field in the DB entries
it creates so we can move forward with a real fix to this issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
For some reason, we set our dbpath to the logfile path, which was completely
broken, and we didn't even check the return value coming back (which of
course was -1 meaning the set failed). Add some comments so people can
understand what is going on here now too.
Signed-off-by: Dan McGee <dan@archlinux.org>
For our Czech, Polish, and Russian translations, they do not need to be at
the more specific 'lang_COUNTRY' code, but can live at just plain 'lang'.
This follows the pattern of most other translated programs out there as
Roman pointed out on IRC.
ru_RU: 2 (pacman and libalpm)
ru: 128 for him, 131 for me (everything else)
Signed-off-by: Dan McGee <dan@archlinux.org>
If the end of the pB list was reached before the end of pA, we failed to
read any remaining files from the pA list. Add an additional loop to ensure
all entries of pA are added to the return list regardless of whether we have
reached the end of pB.
This new loop also eliminates the now-unnecessary check for a null pB, as we
need to ensure we are excluding directories in the resulting output anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes upgrade040.py and upgrade041.py (041 now fails!):
* the old pactests didn't check the existence of the relocated file
* upgrade041.py was broken due to a typo (missing comma)
New upgrade046.py pactest was added (derived from the fixed upgrade041.py).
This fails because the file relocation check is _hacked_ to conflict.c, and
_alpm_db_find_fileconflicts is not called in case of --force.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This fixes FS#9242 and FS#9362.
Set umask before the sources are extracted, and after the /etc/profile.d/*
files are sourced in handledeps.
This sourcing of profile.d files is why umask was moved to the build
function in the first place, as can be seen in commit ac965ed401.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
sync->newversion shouldn't be public at all, and internally we access it directly.
(Before pmsyncpkg_t clean-up the analogue of this field [type] was needed in replaces computation.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This patch indroduces a new public alpm_sync_newversion, which scans for new
version of a package in sync repos.
Hopefully this will reduce code duplication in the future:
* check-for-pacman-new-version from front-end can be easier
* -Qu refactoring
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Fixes FS#9230. Ensure we have the VCS binaries available when doing the
development version number checking.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a bunch of guards around function calls like open() and stat() to ensure
we are not going to get ourselves a python error. This made implementing and
testing the new upgrade045 pactest much easier, as its whole purpose was to
create a dead symlink and debug a segfault of pacman (which caused no DB
entries to be written) to support the previously checked in fix for FS#9235
(commit 0c2206f542). Both of these cases are
now non-fatal in pactest.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#9235.
We already had the following case in extract_single_file :
/* cases 1,2,3: couldn't stat an existing file, skip all backup checks */
But we actually only did a lstat here. And if lstat worked, we did a stat
without checking.
When lstat works and stat fails, it means we have a broken symlink, like in
FS#9235. We can actually treat this case like a non-existing file.
The broken symlink will then be simply overwritten.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
_alpm_pkgname_pkg_cmp(pkgname, pkg) returns true iff pkg's name is pkgname.
This is useful if you want to remove a package from pmpkg_t* list, and you
want to search for package name.
This allows cleaning the -Ru code a bit, by removing the need of a dummy
pkg.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
With --unneeded option 'pacman -R' doesn't stop in case of dependency error;
it removes the needed-dependency targets from the target-list instead. See
also: http://archlinux.org/pipermail/pacman-dev/2007-October/009653.html .
The patch also adds a new causingpkg field to pmdepmissing_t which indicates
the to-be-removed package which would cause a dependency break. This is
needed, because miss->depend.name may be a provision. miss->causingpkg will
be useful in -R dependency error messages too.
[Xavier: renamed inducer to causingpkg, removed the _alpm_pkgname_pkg_cmp
helper function as requested by Aaron. This might be added by a further
commit. Other small cleanups, updated manpage and bash completion.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The force option should only be specified in the PKGBUILD with
options=(force). This information should be handled like any other meta
info, and there is no need to have a special repo-add option for it.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: fix up a few more references in contrib/ scripts, etc]
Signed-off-by: Dan McGee <dan@archlinux.org>
Keeping this hack around where installed size is only shown if it is
greater than total download size encourages broken repository databases.
Signed-off-by: Dan McGee <dan@archlinux.org>
Looks like no one ever documented -L/--log, so do that now. In addition,
address some of the issues brought up in FS#9156 and add a note about build
output and logs being in the current locale.
Signed-off-by: Dan McGee <dan@archlinux.org>
Make the error message printed when addtarget fails consistent between
add.c, remove.c and sync.c.
The main problem was that the "failed to add target" in case of a removal
operation could sound confusing. There was also a little output problem
with -U ("failed" was missing).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When removing the last packages from a database, repo-remove silently
failed. Now an error is printed.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Move these two scripts into contrib/, and start the process of de-automaking
them by removing the @sysconfdir@ references and the gettext initialization.
The removal of all gettext will soon follow.
Signed-off-by: Dan McGee <dan@archlinux.org>
The path selection for stripping binaries was slightly off, so any binaries
in subdirectories of opt/ were missed. Fixes FS#9342.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix for sync044.py and reason001.py.
Rename sync->data to sync->removes (alpm_list_t *)
Replace pmsynctype_t sync->type by pmpkgreason_t sync->newreason
The type field was set to UPGRADE or DEPEND or REPLACE.
Instead of using type = UPGRADE or DEPEND, we now rather use a
"pmpkgreason_t newreason" field directly (= explicit or depend) which allows
a better handling of the install reason.
And the REPLACE type is now deduced implicitly when the sync->removes list
is not empty.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* eliminate asymmetry (innerconflict vs. outerconflict)
* fix a memleak (in case of PM_ERR_MEMORY deps wasn't freed)
* fix wrong pmconflict_t duplication (*retconflict = *conflict)
Note: the new code introduces some code duplication which shall disappear by
fixing FS#7524.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unnecessary synclist_free function, and use our standard way
(alpm_list_free_inner + alpm_list_free) instead.
This slightly reduces code duplication.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The previous sed command matched every line starting with r.
For example, with mpd-svn package in aur, the svn log output was rather big,
and there were several lines starting with r (the actual revision : r7155,
but also other lines starting with reverting and run), so this broke makepkg:
> makepkg
==> Determining latest svn revision...
-> Version found: 7155
everting
un
sed: -e expression #1, char 27: unterminated `s' command
To make the sed command more bullet proof, I added the -q option of svn log,
which produces a quieter output, without the log.
And I changed the sed command to only match numbers for the revision.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The original patch from Nagy tried to resolve target vs target conflicts,
and so broke the following pactests : sync040, sync041 and sync990
Nagy's proposal to solve this situation was to choose the interactive way,
ask the user how to deal with it: either remove pkg1 or remove pkg2 or stop
here. So he left this as a TODO.
But instead of trying to resolve these conflicts or asking the user, I
tried to find a more conservative way, looking at what the current pactests
expected:
If between the two conflicting packages, one provides the other, pacman
will keep that one and remove the other from the target list. That breaks
sync893 and sync897. But Dan agreed these two looked weird and should be
changed.
This commit should close FS#8897, FS#8899 and FS#9024.
Reference:
http://www.archlinux.org/pipermail/pacman-dev/2007-October/009745.htmlhttp://www.archlinux.org/pipermail/pacman-dev/2007-December/010393.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The mixup causes a fail in the build using --enable-debug on x86_64 but not
i686, so none of us caught this right away. Fix it. FS#9297.
Signed-off-by: Dan McGee <dan@archlinux.org>
Edit _alpm_db_add_pkgincache to not duplicate packages, because this is not
needed, is slower, and uses more memory. This made the max memory usage
during base reinstall go from 10.4MB to 9.7MB.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Testdb will now scan the local database to check there are no conflicts.
I'm not sure how it's possible to get this situation. At least pacman
doesn't allow installing a package that conflicts with a local one, without
removing the local one. But maybe in a very weird situation, or because of
a bug, it could be possible. But anyway, this only requires 5 lines of
code.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function has a limited purpose, but might be interesting to do a
sanity check from a frontend (eg testdb).
Also removed the private _alpm_checkconflicts function to avoid confusion.
This function was used only once in libalpm, in sync.c, and was just a
single line anyway. Having to do it manually makes it explicit that we are
looking for two kind of conflicts (targ vs targ and db vs targ).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pacman isn't designed to fail when under fakeroot anymore, so kill this
check off which fails anyway if the logfile is missing (such as when the
--valgrind flag is used).
Signed-off-by: Dan McGee <dan@archlinux.org>
We have a debug message in the target vs. target file conflict check, and
this is a bit rediculous when it comes to watching output from something
like smoke001.py. Instead, put the output outside this inner loop so we only
see it at most once per target, which is much more reasonable.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the symmetric of --asdeps, install packages explicitly.
Documentation and completion files were updated accordingly.
Added sync301.py and upgrade032.py pactest files to test this.
I also made a little modification in ALLDEPS handling too.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The deptest code (pacman -T) used by makepkg was mostly in the frontend.
There were 2 drawbacks:
1) the public splitdep function returns a pmdepend_t struct, but the
_alpm_dep_free function for freeing it is private. So there was a memleak.
2) there is a helper in the backend (satisfycmp in deps.c) which makes this
function much easier.
So this adds a new public alpm_deptest in libalpm/deps.c, which cleans
pacman_deptest in pacman/deptest.c a lot.
Besides, alpm_splitdep was made private, because the frontend no longer
requires it, and _alpm_dep_free is also private.
Finally the deptest001 pactest was extended.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Another elimination of a static length structure in libalpm. Should result
in a little more memory saved during execution of packages with lots of
deltas attached.
Signed-off-by: Dan McGee <dan@archlinux.org>
* added a newline to a conflict message in add.c
* removed the trailing dot in a replace message in callback.c.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Workaround found in Advanced Bash-Scripting Guide, localization section.
"added a \0 (NULL) at the beginning of the sentence."
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Pacman 3.0 printed the following message if a file could not be found:
ERROR: xxx was not found in the build directory and is not a proper URL.
We lost this logic in 3.1 when moving to the DLAGENT type stuff, so a
not-found file got passed all the way to the download logic where it failed
with a odd error message. Bring back some logic to ensure only files with
URLs get past a certain point, and fail if the file is not available.
Fixes FS#9208.
Signed-off-by: Dan McGee <dan@archlinux.org>
s/old packages/packages that are no longer installed/g.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We are in string freeze for the 3.1.1 release. This commit updates all the
message files to the latest code, and all translation updates should be
based off of these po-files. Please attempt to keep the line number changes
to a minimum- there should be no reason to update these po files with just
new line numbers. That way we can more easily see exactly which translations
were updated.
Signed-off-by: Dan McGee <dan@archlinux.org>
We shouldn't have the stock config be Arch specific for a few reasons:
* Although it is our package, others should be able to use it
* Keeping the mirrorlist coupled to the pacman package makes it hard to push
updates to users without releasing a new copy of the pacman source
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch cleans up the Arch-specific pacman.conf (to be provided in
the pacman Archlinux package) in an attempt to reduce the number of
PEBKAC errors seen enabling default-disabled repos.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the 'provname provver' format to 'provname=provver'.
In .PKGINFO, the provisions are copied from the PKGBUILD without quotes. So
the provision version was actually handled as a different provision...
See FS#9171.
Dan: Unfortunately we have to change our original specification for
versioned provisions with this patch, but it ends up being the simpler and
cleaner solution in the long run, and if there is any time to change it the
time is now before many packages have been built. Keeping the ' ' based
format would have required us to do special parsing in repo-add, as well as
being susceptible to users not using quotes in their provides array.
Hopefully this will resolve the issues we had with our initial plan. Sorry
for the confusion.
Acked-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Also add 3 new pactests to cover both the -U and -S operations for versioned
provisions.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses some of the issues in FS#9192. Attempt to clarify the -Rc
and -Rs options in the man page.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add documentation for --holdver (from Scott) and --forcever (saying this
is an internal option that should not be used by most end users), and
re-alphabetize the --asroot option.
Signed-off-by: Dan McGee <dan@archlinux.org>
If we allow _parseconfig to continue processing when section is not defined,
then we have the potential to segfault during strcmp calls. This is no good.
For some reason, we had existing logic that tested this case but only if it
was processing and 'Include' directive. Expand the check to check for a NULL
section in all cases, and print an error message if this is the case.
Reported here:
http://bbs.archlinux.org/viewtopic.php?id=42235
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix for FS#9176.
A previous commit (6e8daa553b) already forced all database files to 644.
Now the directories are also forced to 755.
Additionally, repo-add now sets the umask to 022, just like makepkg does, to
fix the problem at its root.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Previously, this caused both scripts to look for
pkgname-pkgver-pkgrel-arch..pkg.tar.gz - extra period has been removed.
Fixes FS#9190.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#5179. Prints a notification of package replacements
when updating the packages using the --noconfirm flag.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
-Qg was handled twice.
--ignore completed on all installed packages instead of all
packages.
--ignoregroup had a special handling that seems unnecessary. It
wasn't done for --ignore, and it apparently works fine without anyway.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
For example, if the cachedir is a broken symlink or a non writable
directory, pacman fallbacks to /tmp/. Just before doing that, it freed the
handle->cachedirs list twice !
once in _alpm_filecache_setup, and once in alpm_option_set_cachedirs. So the
first one was removed.
Fixes FS#9186.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Packages put in the sync->data field were always duplicated with pkg_dup,
and then freed, This is not needed.
Killing this duplication of packages made the memory usage during base
reinstall go from 10.4 MB to 8.1 MB.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
In the old code 'alpm_list_diff(_alpm_db_get_pkgcache(db), dblist,
_alpm_pkg_cmp);' was slow.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: In my opinion, computing both dblist and modified in one for loop also makes
the code clearer, besides being more efficient.
Also renamed joined to targets since I also find that clearer.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This pactest demonstrates that we should copy the reason between the
to-be-replaced and replaced packages
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
We didn't have a free function before, causing some memory leaks. We also
need a dup function now that strings are not in the structure but are
dynamically allocated.
Also adapt pmdepmissing_t to use a pointer to a depend struct instead of an
inclusive one so we can use the functions we created here.
Signed-off-by: Dan McGee <dan@archlinux.org>
Two functions defined in alpm.h were not marked with SYMEXPORT, causing
linking errors if they were used.
In addition, remove the incorrect use of the 'alpm_' prefix from an internal
function and replace it with '_alpm_'.
Fixes FS#9155.
Signed-off-by: Dan McGee <dan@archlinux.org>
This also affects all structures with static strings, such as depmiss,
conflict, etc. This should help a lot with memory usage, and hopefully make
things a bit more "idiot proof".
Currently our pactest pass/fail rate is identical before and after this
patch. This is not to say it is a perfect patch- I have yet to pull valgrind
out. However, this should be quite safe to use in all situations from here
on out, and we can start plugging the memleaks.
Original-work-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#9147, where issuing a ctrl-C at a prompt puts the users prompt on
the same line as our question. This can also occur during download bars.
Although we might end up putting one too many newlines to the screen now, it
is better than not putting one at all.
Also update the copyright in pacman.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
It turns out the orphan name was misleading. Real orphans are packages
installed as dependency no longer required by any others (-Qtd).
The -t option only shows package not required by any others, so --unrequired
describes it better.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts commit e28973169d.
This code might fit better in the frontend than in the backend finally.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2007-November/010150.html
I also changed it for fixing FS#8763 :
if there is exactly one provider, pacman will pull it and print a warning.
if there are several providers, pacman will list them and fail. It's up to
the user to pick one. Add sync501 pactest to reflect that.
Document the following:
* -R can take a group
* -S can take a group and provision
I also split up the -S description into multiple paragraphs because it
was getting too large.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
[Dan: added some feedback from the ML, rewrapped lines]
Signed-off-by: Dan McGee <dan@archlinux.org>
It wasn't even implemented correctly, and it really doesn't have a use if
packagers just do their job correctly anyway for a distro. Let's not try to
solve a problem with the wrong solution now.
Signed-off-by: Dan McGee <dan@archlinux.org>
We had an unused date element in the pmpkg_t struct (not builddate or
installdate). Kill it off and fix the one function that was using it.
Signed-off-by: Dan McGee <dan@archlinux.org>
The --asroot option was not passed to recursive calls of makepkg.
In addition, a 'cd' call was done only on the fakeroot branch instead of
both fakeroot and root branches. Move it outside the conditional.
Noticed-by: Karolina Lindqvist <karolina.lindqvist@kramnet.se>
Signed-off-by: Dan McGee <dan@archlinux.org>
Update description of path specifiers for both pacman and pacman.conf in
their respective manpages. Ensure it is obvious that they are absolute and
not relative paths.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is an Arch-specific tool (although others could find use in it), so
off to the standalone ABS package it goes.
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the prototypes out of contrib/ and into the top level directory, and
install them to what is usually /usr/share/pacman/ on a package install.
Signed-off-by: Dan McGee <dan@archlinux.org>
The previous fileconflict check (package vs filesystem) skipped the conflict
when the file on the filesystem was a directory or a symlink to a directory,
no matter what the file in the package was.
Now, the conflict will only be skipped if the file in the package is a
directory (so compatible with a dir or a dir symlink on the filesystem).
So in the case of 8156 (new fileconflict003 pactest for this case), instead
of silently ignoring the extraction of the test symlink, pacman will now
fail because of a file conflict between the test symlink in the pkg2 package
and the test directory on the filesystem.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Trying to make a symlink at the top level previously made pactest fail.
For example : "test -> test2/" as a file in a package.
The path to the test symlink was empty in this case, but the python code
still tried to chdir in "", which failed.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
By attempting to stat the cachedir when we load the pacman config, pacman
bails out if it is a non-existant directory, even if it will never be
needed. This is unfortunate as it is only used for sync transactions anyway.
Instead, wait until we need it in _alpm_filecache_setup to actually do
anything.
Reported as FS#9096.
Signed-off-by: Dan McGee <dan@archlinux.org>
Originally noticed in FS#9024, but was fixed in previous changes anyway.
However, it doesn't hurt to still check it.
Also add a pactest from Chantry Xavier for the original problem to ensure
we can't reproduce it.
Signed-off-by: Dan McGee <dan@archlinux.org>
The recent upgrade of magic.mime in the file program changed the mime type
output to application/zip instead of application/x-zip as it is a registered
type. Unfortunately we then just skipped zip file extraction becuase of this
change.
Signed-off-by: Dan McGee <dan@archlinux.org>
This was the case of the bash packaging error where a file was removed from
the package but not the backup array.
I just added a sanity check so that only the files from the backup array
that are also in the filelist are used.
I had to edit upgrade026 pactest slightly : it required the file to be
copied to .pacsave instead of moved. But just moving it should be enough, as
we agreed on the ML :
http://www.archlinux.org/pipermail/pacman-dev/2007-December/010440.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
These used FUNCTION output level and not DEBUG, so I didn't catch them way
back when I removed those gettext calls. Remove them now (which exposed a
nice little memory access error elsewhere in the code). This should have a
slight speedup effect on the code too as we no longer have to make the
gettext call even when these messages aren't printed.
Signed-off-by: Dan McGee <dan@archlinux.org>
Ugh, it was a pain to figure out why the Total Removed Size was showing up
wrong in the output of removed packages, but this was why- we used a stupid
_alpm_pkg_new call instead of just duping the package. Fix this. In the long
run, we really need to figure out better ways to not duplicate all this
package information.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds a pactest for the relocation of a config file between two packages
(case of etc/profile moving from bash to filesystem).
While running this pactest, I found out that chk_filedifference didn't work
correctly with an empty list as second argument. So that's fixed now.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2007-December/010610.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is another case where pacman-git asks for confirmation, when it should
not. It is when removing packages. If running with makeworld --noconfirm
--rmdeps the question will come to the log file, and never appear on the
console, so you can wait forever wondering what is happening.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is something pacman can do on its own straight from the archive, and we
will reduce the chance of problems occurring becuase of inproper FILELIST
generation as we have had in the past with special characters in filenames.
Once we remove it from makepkg. we can remove any usage of it from all of
our other tools, including pacman, pactest, and contrib/ utilities.
Note that removing it from pacman uncovered a few other bugs anyway, so this
was probably a good move.
Signed-off-by: Dan McGee <dan@archlinux.org>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case manlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 012f793978 was a bit misguided in its
thinking, and resulted in a package built without asciidoc enabled not
installing the manpages to the system on a 'make install' operation. Fix
this behavior by making manpages required in a normal build, and in order to
disable their existence, the '--disable-doc' option must be used.
Hopefully this solves manpage issues for both developers and package
builders while allowing as much flexibility as possible.
Signed-off-by: Dan McGee <dan@archlinux.org>
As I mentioned earlier on the ML :
http://www.archlinux.org/pipermail/pacman-dev/2007-December/010416.html
the first part of commit 843d368ef6 had no effect because of a bug.
So I fixed the bug, but since this would change backup handling behavior,
and possibly require other bigger changes to work right, I decided to just
disable that part temporarily, and left a TODO in the code.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
query002 and sync1100 had PACMAN_OUTPUT rules that looked at the
build/install date (localized).
Instead of looking at the month name, it will now check the year, which
should be safer.
I also had to add another pactest (query005) for keeping the same coverage.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
I thought it was wierd that makepkg didn't do a sanity check for the
$pkgname. This makes for a simple first try at a GIT patch.
Signed-off-by: K. Piche <kevin@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#7380: alpm crashes on passing NULL to alpm_trans_commit in
a sync operation. Adds check that data parameter is not NULL in
several functions.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
[Dan: fix whitespace]
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow someone to install a group but ignore individual
packages inside the group.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
It is possible for the if statement to never succeed, causing path to
never be freed. It is also possible for the if statement to succeed more
than once per loop, which could have caused a segfault.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
It's probably far from perfect, but at least I tried to translate
everything.
I noticed a missing newline at libalpm/trans.c , line 573 :
_alpm_log(PM_LOG_ERROR, _("call to popen failed (%s)"),
I don't think it's possible to fix it now (string freeze?), so I didn't.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
During last rebase where the checkdeps prototype changed, I messed up the
arguments order (remove list, then upgrade list). That made testdb totally
useless.
Also remove the newline that was manually added by the log callback.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
abs has always been an Arch Linux specific tool, and although it is used
primarily by pacman and makepkg, it should not be included with a distro-
agnostic tarball. In addition, maintenance of the script would be better
outside of pacman and would allow for more frequent updates.
This also facilitates our move away from a cvsup/csup dependent tool for
syncing PKGBUILDs.
Signed-off-by: Dan McGee <dan@archlinux.org>
Only the messages in pacman frontend were updated, and it's probably not
perfect yet, but it's a start.
There are 160 untranslated msg left for the scripts / tools.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
You can use foo<2.0 and foo>2.0 as depend
add046.py and add047.py pactests were added to check this
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Updated libalpm translation
* Regenerated hu.po files, because the 'call-for-translators version' was outdated
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#7147. Do not ask about upgrading pacman when -w and -p
flags are used.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If /tmp was full during the early stages of package extraction, we were
unable to extract the package description file with the call to
archive_read_data_into_fd(archive, fd) becuase we never checked the return
code. Add a check to ensure the extraction was successful and print and
return an error if it was not instead of falling through to a possibly
untrue error message.
This should fix FS #8885.
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no real reason to make it look like someone that can't bother to
set the packager variable is official in any way, so remove the Arch Linux
reference from makepkg.
Signed-off-by: Dan McGee <dan@archlinux.org>
Due to commit da1222de2e30aabcae9d17bbfa10bbf0672338af, we can now use
fakechroot to completely run scriptlet pactests
Use "which" functionality so as not to REQUIRE it for all users
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I appears that when chrooted, the /bin/sh used by popen is that of the parent
process. This is true until the process forks once chrooted, which we do not
want to do.
As such, this actually makes things nicer. We don't need a /bin/sh in a chroot
to run install scriptlets, and don't need to check for it in the root directory
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Check for existence of the logfile first, and output an error if not found
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The new pattern is as follows:
. /path/to/scriptlet
post_upgrade X Y
This requires less frameworking in the install scripts (the three lines that
shift and eval a function are nasty)
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Update the GPL boilerplate to direct people to the GNU website for a copy of
the license, as well as bump all of Judd's copyrights to 2007.
Signed-off-by: Dan McGee <dan@archlinux.org>
Make the manpage a little more distro agnostic by referring to ABS in the
context of Arch Linux, and saying that prototype files are also available
with the pacman source.
Signed-off-by: Dan McGee <dan@archlinux.org>
Thanks to Allan for inspiring all this work on what was one little TODO item
in the codebase. :)
Change changelog handling so we can now dump a changelog from both installed
packages and package files (fixes FS#7371). We do this by moving all of the
machinery to the backend where it should have been in the first place.
The changelog reading is now done through a open/read/close interface
similar to the fopen/fread/fclose functions (can you guess how it is done?).
It is buffered by the frontend, so programs using the library can read as
much or as little as they want at a time.
Unfortunately, I could not implement a changelog_feof function due to some
shortcomings of libarchive. However, I left the stub code in there,
commented out, in case it becomes possible later or anyone wants to take a
stab at it.
Original-work-by: Allan McRae <mcrae_allan@hotmail.com>
Improved-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If _alpm_unpack has a specific file to extract (not NULL), but doesn't find
it, it'll now return 1, for indicating the failure.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The alpm_list_free(complete) needs to be done OUTSIDE the loop walking
through the server list.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This feature (introduced by b118ce55bd as a
part of -Sc) could actually be helpful in the 3.0 -> 3.1 transition, because
all sync dbs will be left in /var/lib/pacman/, while the updated ones will
go to /var/lib/pacman/sync/.
So it'll now clean everything in /var/lib/pacman/, and only the unused
databases in /var/lib/pacman/sync/ (with the exception of local/ and sync/
in both cases).
Note: This feature is undocumented. I wonder if moving it to another option,
something like -S --dbclean, wouldn't help for documenting it.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now alpm_checkdeps first search for literals, then search for no-literal satisfiers
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: fix spelling of INTALL, fix line wrapping]
Signed-off-by: Dan McGee <dan@archlinux.org>
Update zsh completion file to version 0.5-2 from AUR and add the new
options in pacman 3.1.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#5392. If hard links are present for a man page, all
other hard linked files are removed, the man page is zipped and the
hard links are updated to the newly compress man page.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
[Dan: use find -samefile option, don't fail if one of mandirs is
nonexistent]
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes the output issue related to the progress bar by delaying the
output. We can decide later (post-release) if we like this method or we want
to switch to something else.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: just some minor cleanups]
Signed-off-by: Dan McGee <dan@archlinux.org>
Update all of the pot and po files with the latest messages available.
Translators- you are encouraged to do this as well every time you update the
translation, and the directions in 'translation-help' should help. Also feel
free to delete all the old translations that end up at the bottom of these
files and only clutter things up.
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_list_find and alpm_list_find_ptr will now return a void *, and
alpm_list_find_str will return a char *, instead of an int.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I started playing around with gcov today and it showed a few places in the
code that we don't test at all. This is the start of ensuring that we
execute most of the code in our codebase.
Signed-off-by: Dan McGee <dan@archlinux.org>
This should simplify our output a bit when it comes to determining whether
or not we need a newline in our output. A "done" message was almost always
immediately followed by another start message anyway (or some other output),
so it really isn't necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
When a DB is "registered" in libalpm, it goes and tries to create paths and
other BS which is stupid, but a pain in the butt to fix. For now, work
around this terrible behavior by ensuring our paths are always set before we
call any alpm_db_register function.
Signed-off-by: Dan McGee <dan@archlinux.org>
I made pacman path handling a bit odd with my rootdir changes a while back
in order to increase flexability. However, it had a bit of a drawback in
that dbpath/logfile/etc. would not default to being under the rootdir if
that was the only parameter you specified in the config file or on the
command line. (Note: logfile handling was always broken due to the explicit
logfile line required in config files)
Pacman now works as follows:
if a rootdir is specified but not dbpath or logfile:
attempt to place the logfile and dbpath in their default locations under
root
if an explicit dbpath/logfile is specified:
interpret these as absolute paths, regardless of the rootdir setting
if nothing is specified:
fall back to configured defaults
Signed-off-by: Dan McGee <dan@archlinux.org>
During a pacman operation such as a group install, pacman can ask several
questions such as "local version is up to date. Upgrade anyway?". They are
usually all answered either by yes or by no:
* yes when you want to reinstall all the targets.
* no when you only want to install the missing ones (either because you are
installing a group, or because you are copying a pacman -S line from wiki or
whatever).
So instead of asking this question for each target, it is now now configured
with a flag. Yes will be the default -S behavior, No will be achieved with
the --needed flag.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
dump_pkg_sync is now a trivial wrapper for dump_pkg_full
Some smaller changes:
* string_display function added to util.c [prints None in case of empty string]
* Filename field added to -Qip
* rename License to Licenses
* 'Compressed Size' used instead of 'Download Size' for -Qip
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: fix whitespace errors, spacing issues, const modifiers]
Signed-off-by: Dan McGee <dan@archlinux.org>
This pactest checks what happens if a package exists in two sync repos.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: added sync1006, same test with different versions]
Signed-off-by: Dan McGee <dan@archlinux.org>
* memleak found by Nagy in checkdeps
* an useless line found by Nagy in resolvedeps
* data wasn't set to the missing dependencies in sync_prepare
* use the MALLOC macro in resolvedeps
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_depcmp is simple enough that we shouldn't need constant debug logging,
and the logging we do have in there negatively impacts our speed regardless
of whether we actually are seeing it or not. If it ever needs debugging, it
would be trivial to reimplement it by just temporarily reverting this
commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
Hopefully these are unnecessary, as they were probably added originally to
cover up a problem instead of finding the root cause. I'd rather fail hard
in these cases anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
_alpm_innerconflicts: check for target<->target conflicts
_alpm_outerconflicts: check for target<->localpkg conflicts
This will be useful in sync.c clean-up and in testdb.c
As an application the patch also fixes a misleading message (and a memleak)
in add.c
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I didn't understand why realpath was called on every files of every filelist
in query_fileowner :
ppath = resolve_path(path);
It turns out this is needed for the diverted files. For example, cddb_get
installs /usr/lib/perl5/site_perl/5.8.8/CDDB_get.pm which actually ends in
/usr/lib/perl5/site_perl/current/CDDB_get.pm .
And for making pacman -Qo /usr/lib/perl5/site_perl/current/CDDB_get.pm ,
realpath has to be called on both the target, and the file in the filelist.
However, realpath is costly, and calling it on every single file resulted
in a poor -Qo performance. Worst case :
pacman -Qo /lib/libz.so.1 0.35s user 1.51s system 99% cpu 1.864 total
So I did a little optimization to avoid calling realpath as much as
possible: first compare the basename of each file.
Result:
src/pacman/pacman -Qo /lib/libz.so.1 0.24s user 0.05s system 99% cpu 0.298
total
Obviously, the difference will be even bigger at the first run (no fs
cache), though it's quite scary on my system : 1.7s vs 40s previously.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
checkdeps and resolvedeps now take both a remove list and an install list as
arguments, allowing dependencies to be calculated correctly.
This broke the sync990 pactest, but this pactest used dependencies and
provides in an unusual way, so it has been changed.
Dan: the sync990 pactest was just plain wrong. It didn't satisfy the
dependencies correctly, so should never have succeeded.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: some variable renaming, clarification in commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently this only affects -Ss, -Sl, and -Q to output less information (only
package names).
In the future, we can reuse this flag for other things as well.
[Aaron: rewritten as a front-end flag]
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
[Dan: squashed commits together]
Signed-off-by: Dan McGee <dan@archlinux.org>
In the case of a packaging error where install or changelog had bad permissions,
pacman respected the original permissions without trying to fix it - this means
that some operations (changelog) artificially required root permissions to run
In addition, minor function housekeeping on _alpm_unpack
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
This closes out FS#6500 and covers cases where the package names contain regex
characters (i.e. the case of dvd+rw-tools)
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
* The frontend calls alpm_trans_prepare(&data), and in case of errors,
receive the missing dependencies / conflicts / etc in the data pointer.
It apparently needs to free this structure totally with :
alpm_list_free_inner(data, free)
alpm_list_free(data)
So I added alpm_list_free_inner(data, free) in
pacman/{sync.c,remove.c,add,c}
* in _alpm_sync_prepare, the deps and asked lists were not freed in case
of errors (unresolvable conflicts).
Besides the code for handling this case was duplicated.
* in _alpm_remove_commit, free was used instead of alpm_list_free for
newfiles.
* newline fix in pacman/sync.c
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
An alpm_list_free call was missing.
Also make use of alpm_list_free_inner in both _alpm_sync_free and
_alpm_trans_free.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This operation made sense in the days before sync DBs existed, but it no
longer has the same usefulness it once did.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
*.lineno - these show up when you use a shell less-featured than bash
cscope.*.out - These show up when you build reverse databases using -q
Signed-off-by: Dan McGee <dan@archlinux.org>
From now on libalpm informs user about packages which will be
installed/removed in wrong order.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The alpm_get_upgrades was exactly the same as find_replacements +
_alpm_sync_sysupgrade, except that it automatically made the eventual
replacements, without asking the user : Replace %s with %s/%s? [Y/n]
The replace question, asked in find_replacements. can now be skipped by
using a NULL trans argument, so that we get the same behavior as with
alpm_get_upgrades.
So alpm_db_get_upgrades() can now be replaced by
alpm_sync_sysupgrade(db_local, syncdbs).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Note that if you are building manpages with asciidoc now, you must also
have source-highlight installed for it to correctly generate everything.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some hints so we can use asciidoc on the HACKING document. It is still
readable as text, but a simple 'asciidoc HACKING' command will give you a
nice pretty guide now.
Signed-off-by: Dan McGee <dan@archlinux.org>
As the b96922679e commit showed with two
pactests (which were renamed to depconflict110/111), versioned conflicts are
now possible.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces versioned provisions in "provision 1.0-1" format.
_alpm_db_whatprovides was modified accordingly (added sync500.py),
alpm_depcmp was modified accordingly (add043.py passes now; added add044.py
and add045.py).
Notes:
alpm_db_search now uses the whole versioned %PROVIDES% string in its search.
debug logging was simplified in alpm_depcmp.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xavier: fixed a few typos, duplicate const strings with strdup before
modifying them, put some debugging back in alpm_depcmp, minor code cleanups
(var/function renaming), added a note in PKGBUILD man page.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: made strcmp checks clearer, added a comment]
Signed-off-by: Dan McGee <dan@archlinux.org>
dash doesn't pass positional parameters to sourced scripts, causing install
scripts to fail. Instead of sourcing the script, make it executable and
call it directly which allows positional parameters to be passed correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
pmdepmissing_t was used for two totally different things :
missing dependencies, and dependency conflicts.
So this patch simply adds a type for dep conflicts,
and convert the code to use it.
This fix the TODO in conflict.c :
/* TODO WTF is a 'depmissing' doing indicating a conflict? */
Additionally, the code in conflict.c now eliminates the duplicated conflicts.
If pkg1 conflicts with pkg2, and pkg2 conflicts with pkg1, only one of them will be stored.
However the conflict handling in sync_prepare (sync.c) is still very asymetrical, and very ugly too.
This should be improved in the future (there is already a pending patch from Nagy that cleans it a lot).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The names related to conflicts are misleading :
For dependencies conflicts, the type is pmdepmissing,
and the function names contain just "conflict".
For file conflicts, the type is pmconflict,
and some functions contained just "conflict", some others "fileconflict".
So this is the first step for improving the situation.
Original idea/patch from Nagy, but the patch already didn't apply anymore,
so I did it again.
The main difference is that I kept the conflictype, with the following renaming :
pmconflicttype_t -> pmfileconflicttype_t
PM_CONFLICT_TYPE_TARGET -> PM_FILECONFLICT_TARGET
PM_CONFLICT_TYPE_FILE -> PM_FILECONFLICT_FILESYSTEM
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Suggested by stonecrest on irc :
'I think "uninstalled" would be better, as it implies that the package was once
installed and since removed. Otherwise a user might wonder why there are
non-installed pkgs in cache'
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
We discussed this with stonecrest on IRC :
20:46 stonecrest >> someone brings up a good point.. why aren't repos that aren't in the pacman.conf removed from /var/lib/pacman?
20:46 stonecrest >> i have 118mb and 24 dirs in there, but only 5 repos at present
21:26 stonecrest >> shining: i guess you could prompt the user on deleting every dir in /var/lib/pacman.. since it shouldn't happen that often except for
the first time
21:30 stonecrest >> could be part of pacman -Sc.. what else were you thinking?
I already heard about this before, but it sounded dangerous to me. I didn't even think about a simple prompt.
I also didn't know where this code would fit. And it fits well with -Sc, I borrowed most of the code from sync_cleancache.
Example session :
Cache directory: /var/cache/pacman/pkg/
Do you want to remove non-installed packages from cache? [Y/n] n
Database directory: /var/lib/pacman/
Do you want to remove unused repositories? [Y/n]
Do you want to remove /var/lib/pacman/sync/pacman-git? [Y/n]
Do you want to remove /var/lib/pacman/sync/deltatest? [Y/n]
Database directory cleaned up
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
resolvedeps will now search for other satisfiers
when we don't let it add a package from IgnorePkg.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
And check the IgnorePkg handling is done correctly in the other places.
For example, -Qu and -Su will automatically skip the ignored packages (-Su will print a warning),
but -S will install ignored packages anyway, because it was asked explicitly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This caused more problems than it solved, especially with -Qlp output
and files that are new to the new package.
Signed-off-by: Dan McGee <dan@archlinux.org>
The fallback on providers when a target is not found was already made in the backend :
libalpm/sync.c , _alpm_sync_addtarget .
So I removed it from the frontend.
The sync500 pactest proves this fallback still works correctly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This file only contained one private function : _alpm_db_whatprovides .
And the public alpm_db_whatprovides was in db.c , so I moved everything there.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: updated POTFILES.in as well]
Signed-off-by: Dan McGee <dan@archlinux.org>
The old alpm_list_find was renamed to alpm_list_find_ptr, and a new
alpm_list_find was introduced, which uses the fn comparison-function
parameter in its decision.
Now both alpm_list_find_ptr (a new ptrcmp helper function was also
added) and alpm_list_find_str are just an alpm_list_find call.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: made ptrcmp a static function]
Signed-off-by: Dan McGee <dan@archlinux.org>
Legacy code is hitting the trash here. Remove unnecessary _alpm_time2string
time storage abstraction in favor of just writing the time_t value to the
disk.
The only drawback is that everyone's sync DBs will have to be updated at
least once so that the lastupdate values are stored right. :)
Signed-off-by: Dan McGee <dan@archlinux.org>
Because alpm_pkg_get_depends() no longer returns strings as the data, we
need to first convert the returned structures to printable strings before
we can print the list.
Signed-off-by: Dan McGee <dan@archlinux.org>
So I spent a good 4 hours tracking a bug down tonight due to
alpm_list_copy_data not actually doing what I expected to do. We can't find
the size of an object we don't know the type of, so rewrite it so we pass
in the size explicitly. This was making _alpm_pkg_dup fail and causing all
sorts of other issues.
Signed-off-by: Dan McGee <dan@archlinux.org>
Holy inefficient batman! For a pacman -Qt operation (when we are using
compute_requiredby and not database entries), splitdep was being called ~1.3
million times on my local database. By splitting when we read the DB, we
drop this number to around 1700 and save a LOT of time in doing so (a 5x
increase in pacman -Qt speed here).
Note that the depends alpm_list_t in the package struct is no longer a
string list, but a list of pmdepent_t objects.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove any checks dealing with requiredby from pactest (but not actually
from the pactests themselves). Of course, we should probably find a new way
to check requiredby values of packages since there is no guarantee our code
is working perfectly.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of using the often-busted REQUIREDBY entries in the pacman database,
compute them each time they are required. This should help many things:
1. Simplify the codebase
2. Prevent future database corruption
3. Ensure when we do use requiredby, it is always correct
4. Shrink the pmpkg_t memory overhead
Signed-off-by: Dan McGee <dan@archlinux.org>
The pactest demonstrates what happens if fileconflict was found after the
removal part of a sync transaction.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently alpm_depcmp uses pkg->version as a version number for provisions,
which is odd. The failure of the pactest demonstrates this.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
It's time to define that alpm_list_add(list, foo) adds 'foo' to the end of
'list' and returns with 'list', because:
1. list is a list, not a set.
2. sortbydeps _needs_ an alpm_list_add definition to work properly.
As a first step, I used this definition in recursedeps.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: punctuation cleanup in commit message and code comments, added comment
to alpm_list_add]
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes --ignore and --ignoregroup able to accept multiple
packages/groups by separating each with a comma.
For instance: pacman -Su --ignore kernel26,udev,glibc
This was requested in the comments of FS#8054.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
repo-add was adding the delta files of any package that started with the
same package name plus a hyphen.
In this example, deltatest-libs delta files were added to the deltatest
package:
$ repo-add deltatest.db.tar.gz deltatest-1.0.2-1-i686.pkg.tar.gz
==> Extracting database to a temporary location...
==> Adding package 'deltatest-1.0.2-1-i686.pkg.tar.gz'
-> Removing existing package 'deltatest-1.0.2-1'...
-> Creating 'desc' db entry...
-> Computing md5 checksums...
-> Creating 'depends' db entry...
-> Creating 'deltas' db entry...
-> Added delta 'deltatest-1.0.2rc3-1_to_1.0.2-1-i686.delta'
-> Added delta 'deltatest-libs-1.0.0-1_to_1.0.1-1-i686.delta'
==> Creating updated database file /tmp/deltatest.db.tar.gz
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some const specifiers to the dep functions that can have them. In
addition, rewrite alpm_dep_get_string to use snprintf and cover all of
the bases (operators).
Signed-off-by: Dan McGee <dan@archlinux.org>
Also tell pactest to reset IgnoreGroup like it does for IgnorePkg.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Too many fields were being shown on -Qip output, and sizes were not always
correct (-Qi and -Qip output on the same package did not agree).
Signed-off-by: Dan McGee <dan@archlinux.org>
This really doesn't give us any regressions in behavior, so it is safe to
do although quite ugly. Tell the conflict checking code to ignore symlinks
to dirs so that they are not seen as conflicts.
Hopefully this entire commit will get factored out soon enough.
Signed-off-by: Dan McGee <dan@archlinux.org>
One currently should succeed (006), and 005 fails.
requiredby005.py is originally from Nagy Gabor <ngaba@petra.hos.u-szeged.hu>.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 2ee90ddae2 did a special check to see
if we were removing the head node, but not the tail node. Add a special case
for the tail node to ensure all relevant pointers get updated.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old code thought that alpm_db_whatprovides returns with a list of strings (package names).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit b55abdce7a introduced an lstat wrapper
function that never dereferences paths with a trailing slash, but still
called lstat on path instead of newpath. Oops!
Signed-off-by: Dan McGee <dan@archlinux.org>
Setting this option will change the download progress to show the amount
downloaded, download rate, ETA, and download percent of the entire
download list rather than per each individual file.
The progress bar is still based on the completion of the current file
regardless if the TotalDownload option is set.
This closes FS#7205.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This option acts as if IgnorePkg was set on each package in the group.
This closes FS#1592.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 47622eef4d introduced localized times
in the metadata by way of storing the UNIX epoch value instead of a hard
coded date string. However, it missed a few things:
* If we weren't in the C/POSIX/en_US locale, the date parsing would fail
as it tried to use the abbreviations of the locale being used. Fix this
by switching the LC_TIME value before we parse a date.
* We used ctime to print the date value, which is always the C locale
string. Instead, use strftime to print a localized date string.
Signed-off-by: Dan McGee <dan@archlinux.org>
We really don't need it since it is just links. However, we do need to figure
out how to get our old links to show up right.
Signed-off-by: Dan McGee <dan@archlinux.org>
The lack of descriptions on some of the variables was causing issues with
documentation generation. Adding text to them fixes this.
Signed-off-by: Dan McGee <dan@archlinux.org>
Retrieve SVN/CVS/etc revision number before checking if the
package has already been built. This allows building a newer
version of a developmental package without having to use -f.
Now -f will only be needed if the latest SVN/CVS/etc revision
is the same as the built package.
Signed-off-by: Scott Horowitz <stonecrest@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The old one was old. Use something a bit more recent and a bit simpler as
well so it actually looks OK in the manpage.
Signed-off-by: Dan McGee <dan@archlinux.org>
We only use it with --enable-debug, so we might as well go all out and try
to find any attempt of stack smashing.
Signed-off-by: Dan McGee <dan@archlinux.org>
List head nodes contain null 'prev' pointer, which we can (ab)use to maintain a
back reference to the tail pointer of the list.
While list additions are not _significantly_ improved, they are still sped up.
Original
$ time pacman -Qo /usr/bin/wtpt
/usr/bin/wtpt is owned by lcms 1.17-2
real 0m3.623s
user 0m1.883s
sys 0m1.473s
New
$ time pacman -Qo /usr/bin/wtpt
/usr/bin/wtpt is owned by lcms 1.17-2
real 0m2.006s
user 0m0.263s
sys 0m1.627s
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Now that all paths are defined to reasonable defaults at compile time by
pacman, we shouldn't force users to have RootDir, DBPath, etc. in their
default pacman.conf although these options are always available.
Signed-off-by: Dan McGee <dan@archlinux.org>
It has always been a bit odd that logfile had to be specified in the config
file, but no other paths did. Add LOGFILE as a preprocessor definition, and
make a call to alpm_option_set_logfile() to set the default location so no
logfile parameter is necessary in pacman.conf.
Signed-off-by: Dan McGee <dan@archlinux.org>
Linux lstat follows POSIX standards and dereferences a symlink pointing
to a directory if there is a trailing slash. For purposes of libalpm, we
don't want this so make a lstat wrapper that suppresses this behavior.
Signed-off-by: Dan McGee <dan@archlinux.org>
Don't open a stream to the logfile until necessary. This will allow us
to catch any errors in opening the logfile instead of ignorning them.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of declaring the extern variable in every *.c file, include it in
the header file that makes sense. This means handle.h for the handle, and
conf.h for the pacman side config object.
Signed-off-by: Dan McGee <dan@archlinux.org>
I broke scriptlet logging with ad691001e2.
Readd more or less what was there before, although it still needs a lot of
work including hopefully rewriting it to a new event subsystem and having
it log to a seperate file.
Signed-off-by: Dan McGee <dan@archlinux.org>
This follows the removal patch previously used for GCC & F77 macros. If we
don't use it, dump it so we can speed up configure time.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't use Fortran or Java code in our project, so no need to waste time
looking for this stuff. This gives a noticeable speedup to running the
./configure program as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
Because building of pacman.static fails on some platforms, we should make
it optional. It is enabled by default but can be disabled with the use of
the --disable-pacman-static flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
Hopefully these new autoconf macros, with a little magic, will allow us to
compile with any compiler and still choose the options we have available
to us.
Tested locally with gcc 4.2.2 and gcc 3.4.6; the latter doesn't support two
of the items we previously had hardcoded in our CFLAGS.
Signed-off-by: Dan McGee <dan@archlinux.org>
Do a little cleanup of our configure script. Highlights:
* Remove macros deemed unnecessary to call [1]
* Change check for compiler to look for one that is C99 capable-
this automatically adds the -std=gnu99 flag
[1] Noted in the autoconf NEWS file, notably entries for 2.59d
Signed-off-by: Dan McGee <dan@archlinux.org>
It looks like some of the newer libtool m4 files offer improved support
for the Darwin platform and possibly BSD, so bump our files to these new
versions.
Signed-off-by: Dan McGee <dan@archlinux.org>
basename() is a rather untrusty function call on a lot of platforms as it
does some weird and different things. To solve this, I added a mbasename
fuction to pacman to take its place, and simply removed its usage in the
utilities (it isn't worth dealing with there).
Signed-off-by: Dan McGee <dan@archlinux.org>
Use an autoconf macro to find us a python executable, preferring python2.5
if we can find it. From there, fall back to python2.4 and then python.
Signed-off-by: Dan McGee <dan@archlinux.org>
%d was used, which worked for Linux and FreeBSD. Not so for Darwin. The
warning was probably spat out when compiling on x68_64 as well, but no
developers use this architecture as their primary one.
Signed-off-by: Dan McGee <dan@archlinux.org>
Package dup needs to copy all members. Nathan had his implementation, but
I generalized it to this new alpm_list function (and will use it in the
next commit).
CC: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
These macros take the place of the common 4 or 5 line blocks of code we had
in most places that called malloc or calloc. This should reduce some code
duplication and make memory allocation more standard in libalpm.
Highlights:
* Note that the MALLOC macro actually uses calloc, this is just for safety
so that memory is initialized to 0. This can be easily changed in one
place.
* One malloc call was completely eliminated- it made more sense to do it
on the stack.
* The use of RET_ERR in public functions (mainly the alpm_*_new functions)
was standardized, this makes sense so pm_errno is set.
Signed-off-by: Dan McGee <dan@archlinux.org>
Actually use python commands to generate the filelist instead of os.system
calls that don't necessarily work everywhere. Noticed when running "make
check" on FreeBSD where the tar program is actually bsdtar.
Signed-off-by: Dan McGee <dan@archlinux.org>
Some of the find calls did not have a path, which isn't valid in some
versions of the find utility. Add a . for compatibility.
Signed-off-by: Dan McGee <dan@archlinux.org>
If PKGBUILDs use the correct svn/cvs/etc variables, determine the latest
revision number and force this as the pkgver for building.
Signed-off-by: Scott Horowitz <stonecrest@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had a lot of unnecessary overstatements of libraries to include on
linking, and autoconf/automake takes care of this for us. This also helps
some compilation issues on other platforms.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old code used only the depend.name in messages, which might have not
been informative. The new code uses the whole dependency string in
%DEPENDS% format.
(Dan: slight English clarification in one of the messages)
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move all .cvsignore files to .gitignore for switch in VCS. In addition,
delete ones that were unnecessary because they only contained Makefile
and Makefile.am.
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 8cacc46f8b)
Public alpm_dep_get_string function is introduced, which converts a
pmdepend_t structure to printable string in %DEPENDS% format. This
function is now used in pacman to print dependency error messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old code used memcmp, which is not good for comparing strings:
"pkgname"'\0''\0' should be equal to "pkgname"'\0''a' for example.
The new code uses strcmp.
Signed-off-by: Dan McGee <dan@archlinux.org>
The recommended C99 way to print the value of a time_t is to cast it to
uintmax_t or intmax_t. Do this to ensure compatability with all platforms.
Signed-off-by: Dan McGee <dan@archlinux.org>
Anything dealing with libintl and localization should be correctly guarded
inside an ENABLE_NLS block on both the pacman and libalpm sides.
Signed-off-by: Dan McGee <dan@archlinux.org>
This displays the download size, taking into account delta files and
cached files.
This closes FS#4182.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Delta files will be used if the size is smaller than a percent
(MAX_DELTA_RATIO) of the package size.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow deltas and packages to share the md5sum checking code.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In one of the original clean up patches[1] I changed the search path
for stripping binaries and libraries. This resulted in only
usr/{bin,sbin,lib} being searched. This patch reverts that change.
[1] 721ceee1e2
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
The code didn't match the following comment :
"A depends on B through n depends <=> A listed in B's requiredby n times"
It stopped at n=1 with a break.
I was surprised to see this case happens in real, that's how I noticed the
bug: wine depends on both freeglut and glut, while freeglut provides glut.
So when installing wine, the update_depends function listed wine twice in
freeglut's requiredby. But the compute_requiredby function (used when
installing freeglut, and used by testdb) listed wine only once in
freeglut's requiredby. That made testdb unhappy.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We print the total to two decimal places, so there is no real need for
rounding of the values. Remove the rounding and switch all output to two
decimal places.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 4853a4aad9 used the tmpdir variable
for checking the existence of /bin/sh, without resetting it.
This caused /bin/sh to be deleted during the cleanup part, as soon as a scriptlet
other than pre_upgrade or pre_install was executed.
For example, on the first post_upgrade during a -Su.
I introduced two variables : clean_tmpdir and restore_cwd, for deciding what should
be done in the cleanup part.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This code assumed that DBPath was under RootDir, while this is not necessarily the case :
pacman doesn't enforce anymore than DBPath is under RootDir.
So now, all scriptlets will be put somewhere in RootDir/tmp/, so that when it chroots in RootDir,
the scriptlets are still available inside the chroot.
This also removes the need of normalizing both dbpath and rootdir, in order to do computation on the paths.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Root is needed for most install / remove operation, because it's needed
for chrooting, for running scriptlets.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This is needed because 'xdelta delta' returns 1 even when the delta
creation succeeds. This was causing makepkg to exit after the command
due to bash's -e option.
Some information from the xdelta man page:
The delta command exits with status 0 to indicate that no differences
were found, with status 1 to indicate that some differences were found,
and with status 2 to indicate an error of some kind.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had way too much going on with the Doxygen manpage generation. Clean it
up quite a bit by removing directory manpages, using relative paths, not
having a manpage for every single alpm function, and ensuring internal
functions are not documented publicly.
Signed-off-by: Dan McGee <dan@archlinux.org>
Some of the error messages in _alpm_pkg_load failed to use the pkgname
value when printing, which made error messages rather hard to decode.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the default visibility of libalpm functions to internal instead of
hidden- this allows for slightly better optimization because it tells GCC
that the function can never be called outside of the current module (see
http://gcc.gnu.org/onlinedocs/gcc/Function-Attributes.html).
Also added some attributes to the pacman print functions so that they check
the format strings being passed to them.
Signed-off-by: Dan McGee <dan@archlinux.org>
If /bin/sh is missing in the root directory, scriptlets cannot be executed, as
we're explicitly calling it.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
When the -Sy operation failed, the lock wasn't removed because
alpm_trans_release wasn't called. This is fixed now.
Also, after my last change in commit 52e7e6d747 ,
Sp didn't do anything anymore.
That's because needs_transaction returned false for -Sp, so the sync transaction
wasn't run. However, the current implementation of -Sp requires a sync transaction.
Also, since a transaction creates the lock file at the beginning, and releases it
at the end, this mean that -Sp requires root access anyway..
I think I understand now why Aaron found that the current -Sp implementation is hackish :)
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
I just moved the root path check out of needs_transaction, and put it directly
in pacman.c . I think this part is alright.
For the other problems, I thought about doing the transaction first, in a new
sync trans function, which will init and release a transaction. And then doing
the commands like -Ss / -Sl / -Sg / -Si.
The problem is that for commands like -Sys / -Syl / etc, only the refresh part
of the transaction should be done. So I had to introduce an ugly sync_only
hack.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
The md5 routines are one of the chokepoints of libalpm (main chokepoint being
archive extraction). Although IO delay causes a lot of it, we can at least
inline some of the md5 stuff as we aren't that concerned about space and
eliminate quite a few function calls.
Signed-off-by: Dan McGee <dan@archlinux.org>
The code for setting the lastupdate file path still referenced both the
root and dbpath, when we should only be using dbpath. Fix it.
Signed-off-by: Dan McGee <dan@archlinux.org>
The -A,--ignorearch option was added and given help text, but never actually
listed as valid to the option parser. Fix this.
Signed-off-by: Dan McGee <dan@archlinux.org>
Included options are -g, -i, -s, and -l
All of these will sync the DB if -y is specified and permissions are
appropriate.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Packages and DBs now support using the UNIX epoch (seconds since Jan 1, 1970)
for use in builddate and installdate. This will only affect newly built
packages. Old existing packages with the text format are still supported, but
this is deprecated.
In the case of removal of text time support, this code will fail gracefully,
returning the start of the epoch for broken packages.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
In most cases, we want to fully scan a package when we load it, which serves
as a integrity verification check. However, there are times when it is only
desired to read the metadata and nothing else, so allow the caller of pkg_load
to choose the behavior they need.
This pays big dividends in speeding up pacman cache cleaning functionality.
Old (729 packages):
real 1m43.717s
user 1m20.785s
sys 0m2.993s
New (729 packages):
real 0m25.607s
user 0m19.389s
sys 0m0.543s
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman/callback.c already did the work I set out to do with this commit, so
update the comments accordingly in the frontend and backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
Partial cache cleaning was eliminated in a previous commit because it relied
on package naming conventions. Re-add it the correct way- we actually open
up each package in the cache and get a name and version out of it. If the
name and version match that of an installed package, keep it. If the package
is not installed or the version does not match the locally-installed version,
get rid of it.
This can easily be modified if some other heuristic of keeping and removing
packages is desired, or if we should clean out the cache dir of any files
that are not packages, etc.
The biggest current problem with this new approach- speed. Here is one run
on my local machine, going from 1643 to 729 packages in the cache (753 in
the local DB):
real 4m25.829s
user 3m22.527s
sys 0m6.713s
This is likely best addressed by the package loading scheme, which may be
loading the entirety of each package archive, which is a waste when we only
need the .PKGINFO file read.
Signed-off-by: Dan McGee <dan@archlinux.org>
Previously, package names must match a specified scheme or they will cause
pacman add operations to fail. This is not a very intelligent or necessary
way to act, so remove the dependency on the name of the package to be
installed and read all relevant information from the metadata instead.
This does have one causality to be addressed later- pacman cache cleaning
functionality, which has never been phenomenal, just lost most capability.
Signed-off-by: Dan McGee <dan@archlinux.org>
I suppose -Qii could be used for other things than displaying
the list of backup files, but currently, it's the only one,
so that's how I documented it..
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some alpm functions for getting optdepends, have makepkg include them
in the PKGINFO file, and have a pacman -Qi operation display the raw string
as stored by libalpm.
Signed-off-by: Dan McGee <dan@archlinux.org>
If we don't have asciidoc installed or enabled, we should still have a
successful make. However, we want to ensure 'make dist' fails without
asciidoc. This commit should ensure this.
Signed-off-by: Dan McGee <dan@archlinux.org>
As seen with the recent upgrade of pacman and the removal of the
pacman.d/current mirrorlist, files that were formerly in the backup array
get deleted upon their removal, which could be dangerous. Instead, we should
use the combined backup array of the old and new package. This fix should
address this issue in a relatively straightforward way.
In addition, old files should be moved to pacsave locations as expected.
Signed-off-by: Dan McGee <dan@archlinux.org>
That is the problem mentioned by Nagy there (with suggestions for fixing it) :
http://www.archlinux.org/pipermail/pacman-dev/2007-August/009082.html
If a dependency conflicts with a local package and has to replace it,
the PM_SYNC_TYPE_DEPEND information is lost, and the resulting install
reason is wrong (the package is marked as explictly installed).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
remove048 is the case mentioned there (fails in 3.0 but works in 3.1) :
http://www.archlinux.org/pipermail/pacman-dev/2007-September/009294.html
It's the same as remove046 with -R instead of -Rc.
sync060 is a case reported this morning on IRC :
a pacman -Su wanted to replace gensplashutils by gensplash,
but pacman said gensplashutils was required by initscripts-gensplash,
while initscripts-gensplash was not even installed.
This is also fixed in the current 3.1 code though.
upgrade02{4,5} are the backup handling problem I described there :
http://www.archlinux.org/pipermail/pacman-dev/2007-September/009376.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
installdate should never be present in a package descfile, so get rid of it.
With the last commit, we also don't need the util strtoupper function.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fix FS#8081. The tr_TR locale has known issue with case insensitive
comparisons, mostly because upper(i) != I.
So the .PKGINFO files generated by makepkg MUST contain all keywords in lowercases now.
This was already done, but was not mandatory.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The mistake fixed in commit 26441cf65c
was actually done at two places.
This fix the second one.
Also remove one unnecessary newline introduced by
commit d34b2c4ed8
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
When calling a function of the alpm_option_get_* group, you get a segfault
if you don't call alpm_initialize() first. With this patch those functions
set pm_errno to PM_ERR_HANDLE_NULL and return an error value if handle ==
NULL.
(Dan: modified to meet pacman coding standards)
Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
To keep working correctly with url like :
ftp://ftp.archlinux.org/$repo/os/i686
rankmirrors will now replace $repo by core.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
My two previous hacks related to this part
(8038190c7c and
b15a5194d1) were caused by the lack of
understanding of a feature introduced a while ago:
Better control over CTRL-C interruptions -- do not leave the DB in an
inconsistent state (54008798ef).
Now I have been looking at this commit, and the added feature is indeed
interesting. The main problem I had with it is that it does a rather
unusual use of alpm_trans_release, which caused a few problems that I tried
to fix in a weird way. I think these problems were caused by the fact that
there weren't any difference between "interrupt transaction" and "release a
transaction which failed" actions from the alpm_trans_release POV. So I
decided to add a new function instead, alpm_trans_interrupt, which is
called on Ctrl+C, and which only sets trans->state to STATE_INTERRUPTED so
that remove_commit and add_commit can exit cleanly at a safe moment. This
allowed me to revert my two previous hacks as well.
Also ensure we handle SIGINT correctly in all cases- if a transaction is
not ongoing, then we can free the transaction and exit quickly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts commit dfc85cb5f5
and b6f3fe6957.
This DB check is already in testdb (among others).
Also testdb now uses the db path set at make time by default,
so specifying the db path is optional.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I'm currently working on python bindings for alpm written in pyrex. While
working i found that declaring alpm_strerror as
char * alpm_strerror (void)
instead of
char * alpm_strerror (int err)
and then using pm_errno in the implementation instead of err, could make it
more bindings-friendly.
Dan: cleaned up and added void to declaration. Instead of replacing existing
function, add a new function called 'alpm_strerrorlast(void)'.
Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
repo-add, repo-remove:
'bsdtar -c * | ...' doesn't work (you need '-f -'). Code clean up
eliminated this bug.
Removed the multiple checksum support, pacman now only supports MD5, so
there's no need for the database to contain multiple checksums.
Quote all variables containing file/dir names to prevent paths
containing spaces from causing problems.
Add msg, warning and error functions.
General code clean up.
pacman-optimize:
Use a sub-directory in /tmp for working files to make it easier to clean
up at the end.
Add quotes round $@ in die and die_r, otherwise printf can't display the
message correctly.
makepkg:
Disable colour output if stderr is not a tty.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
I wonder how many tools / scripts deal directly with the sync databases under /var/lib/pacman/ ,
I doubt these are the only ones.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
One string in de.po differed pretty strongly with its translated version.
It may still be totally wrong as far as translations go, but it compiles
now. Get translater to check.
Also, ensure the proper dbpath gets set in the db when it's created.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Suppose a package foo depends on foo1, foo2, ..., foon.
Doing pacman -Rc foo1 foo2 ... foon added foo n times to the removal list,
because what checkdeps return is something like :
foo1 is requiredby foo
foo2 is requiredby foo
...
foon is requiredby foo
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Introduce two new methods into the API - alpm_db_register_sync and
alpm_db_register_local, which replace the functionality of
alpm_db_register. db_register_local always returns the local DB, and
db_register_sync will always try to register a sync DB. This conceptually
separates the local DB from sync DBs in the code. Also updated the pacman
frontend to use the new functions. In addition, this changes the location
of all sync DBs in the filesystem from $DBPATH/$REPO to $DBPATH/sync/$REPO,
This removes the silly limitation that a sync DB couldn't be named 'local',
along with structurally separating sync DBs and the local DB in the
filesystem.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to remove the hack in the frontend where we added a newline
to everything coming out of the pm_printf functions, and instead let the
developer put newlines where they want them. This should be the last hangover
of that auto-newline stuff.
Signed-off-by: Dan McGee <dan@archlinux.org>
As reported by JGC in FS #7652, the check for EACCES is not exactly correct.
We need to check for the ETXTBSY error as well. This is necessary on FreeBSD.
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg didn't correctly detect the type of the archive
since it didn't dereference symlinks, and so failed
to extract the source tarball.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Use the default cachedir (specified at compile time) if one wasn't specified
on the command line or in the config file.
Signed-off-by: Dan McGee <dan@archlinux.org>
A bunch of changes related to my first "real" install of pacman-git into
/usr/local and trying to use it.
* Shift some uses of free -> FREE in libalpm.
* Move stat and sanity checks of config paths into libalpm from the
config and argument parsing in pacman.c.
* Fix issue where dbpath still was not defined early enough due to its
requirement for being used in alpm_db_register. This should be rewritten
so it doesn't have this dependency, but this will work for now.
Signed-off-by: Dan McGee <dan@archlinux.org>
The sync package pkg3 depends on the sync package pkg2, but pkg1 replaces pkg2.
So pkg2 is added to the remove list.
When checkdeps checks if pkg2 can be removed, it looks at the packages that require pkg2
(with the RequiredBy field of pkg2), but this doesn't contain pkg3 at this point.
RequiredBy fields are only updated after the packages are installed.
Proposed solution : checkdeps should know both the remove and upgrade list to decide properly.
Reference:
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008972.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This patch cleans up and fix the _alpm_trans_update_depends function
and ensure that all requiredby fields are filled in case of multiple satisfiers
(previously, the handling of mutliple satisfiers in that function was inconsistent).
This makes a special case handling of requiredby in commit_single_pkg() obsolete,
and so allows cleaning that code as well.
Also fixed upgrade056 pactest because :
1) the requiredby fields were wrong, and this wouldn't happen with the fixed _alpm_trans_update_depends().
2) this is a very unusual case anyway (and handling all corner cases combined to a broken database
seems nearly impossible to achieve).
References :
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008919.htmlhttp://www.archlinux.org/pipermail/pacman-dev/2007-July/008920.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
In order to best resolve bug 6404, move some cachedir handling stuff out of
sync.c and into util.c and create two new functions: filecache_find and
filecache_setup. sync.c was rewritten to use these, and alpm_fetch_pkgurl
now also uses these routines.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the need for two variables for the architecture-specific switches
(things like "-march=i686") by combining it into one variable. Also allow
configure to proceed with only a warning if we don't have presets for the
detected architecture- it is kind of stupid to restrict ourselves like we
had been.
Signed-off-by: Dan McGee <dan@archlinux.org>
In my opinion, a commiting transaction that failed isn't equivalent
to a prepared transaction.
Some things could have been done in the meantime.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
* Move alpm md5 functions to lib/libalpm/util.c
* Remove unneeded includes for md5.h
* Replace md5 implementation with one from http://www.xyssl.org
Dan: clean up XySSL code by removing parts we don't use, and add a note
saying what changed.
Dan: fix alpm_get_md5sum, off by one error on the malloc call and other
small things.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
There's no need for a second hashing algorithm. MD5 serves the purpose
of verifying that a package file hasn't been corrupted during download.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
This basically moves the code from alpm_release, which was mostly about
unregistering all databases, to a safer alpm_db_unregister_all.
This allows to avoid modifying the dbs_sync list while iterating over it,
and and also prevent alpm_release from looping infinitely when a database
can't be unregistered.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This prevents alpm_release to loop infinitely in case of
an interrupted transaction, where the database wasn't
unregistered.
alpm_release should probably also be fixed, as it can
still loop if db_unregister fails for another reason.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The t shortcut for --test was removed,
the orphan option (previously -Qe) was renamed to -Qt,
-Qe lists all packages installed explictly,
and -Qd lists all packages installed as dependencies.
Besides, t can be combined with either e or d.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The --foreign and --orphans functions now behave as a filter
for the other options. This cleans the code a bit, and will
make easier the adding of new filter options, like
explicit (show only explictly installed packages) or depends
(show only packages installed as dependencies).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Remove some unnecessary headers in the two utilities as well as fix
a possible non-null termination issue in vercmp.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using a void *data element in pmpkg_t before, which is unsafe by its
nature of being untyped. Reimplement data as origin_data being a union that
can hold either a path to a package file or a pointer to a cache database,
and make the other necesary updates in the code to reflect this. See package.h
for details.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the commented desc_localized stuff, we can find it later in version
control. Also remove some unnecessary includes of the stat header and
use -fstack-protector-all which is a bit more broad.
Signed-off-by: Dan McGee <dan@archlinux.org>
- Downloaded files weren't being copied to $srcdir
- Counter wasn't being incremented for checksum checks
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
A side effect of the previous commit ( ea9a756eea )
is that it's now possible to use versioned conflicts.
Add two new conflict pactests for showing it.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Instead of barfing when the root path and db path haven't been defined,
have pacman set them to some sane defaults when they aren't specified on
either the command line or the config file.
Also do some cleaning of error output and Doxygen comments.
Signed-off-by: Dan McGee <dan@archlinux.org>
I didn't like the patch proposed by Nagy for the sync1002 pactest here:
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008971.html
So here is another attempt of fixing it.
In case of the DEPENDSONLY flag :
1) pass an empty list to resolvedeps instead of the list of targets
2) empty the trans->packages targets list before adding the resolved deps.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
That function wasn't big, but this might be useful
for later refactoring of the search for satisfier code.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The _alpm_sortbydeps function has two main part :
1) initialization of the graph structure
2) the sorting itself
So it didn't seem bad to move the first part to a second function.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
.gitignore works recursively, so we don't need Makefile and Makefile.in
in all of the subdirectory .gitignore files.
Signed-off-by: Dan McGee <dan@archlinux.org>
Spruce up the asciidoc formatting, fix a few issues that we had. Formatting
now looks pretty good in both the manpage output and the XHTML output.
Also added some options that we have changed since 3.0, and a few wording
updates, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a full refactoring of _alpm_add_commit into multiple functions and a
better layout for later. Some highlights:
* No regressions in pactest performance.
* Much cleaner layout. add_commit is split into four functions:
upgrade_remove, extract_single_file, commit_single_pkg, _alpm_add_commit
* No more super-functions, the heaviest (extract_single_file) is finally
under 400 lines, with much improved commenting as well.
* Incorporation of Andrew Fyfe's ideas for fixing FS #7484. Try to handle
all possible cases of extraction combinations with files, symlinks, dirs,
and non-existant entries on the filesystem. This should make our dealings
with libarchive fall more into our control.
Signed-off-by: Dan McGee <dan@archlinux.org>
This test installs three packages with a circular dependency,
to check everything still goes fine in that case.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This replaces the former -D operation that was undocumented and rather
hacky. It can be used with add, upgrade, or sync transactions and will affect
all packages installed. Should close FS #7193.
Also tell makepkg to use this new flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes the failure of the requiredby004 pactest in a not so pretty way,
but it gets the job done. I purposely used the extremely long name of
PM_TRANS_TYPE_REMOVEUPGRADE to be both clear and in the hope that someone
else will figure out a better solution.
Original idea from Nagy Gabor, patch updated and cleaned for current code.
Signed-off-by: Dan McGee <dan@archlinux.org>
In 1c9f30b9fa
This change should be done AFTER the TODO in recursedeps is implemented.
Then we'll be able to first sort the list, then call recursedeps which keeps
it sorted. For now, the sorting should still be done as the last step.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Patch from Nagy that makes removedeps use alpm_depcmp.
I also renamed removedeps to recursedeps, as it can have
a more general usage, and added an include_explicit argument,
so we can control if packages explictly installed are added or not.
Note: Small changes made by me (Dan) as well- mostly some English grammar
correction and a few other cleanups.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently the d (nodeps) option skips the s (recursive) part,
rendering the Rsd combination totally useless.
This patch makes a recursive removal still possible using the nodeps option,
as Romashka asked there :
http://bugs.archlinux.org/task/6057#comment17784
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
makepkg: We still need the source files in $srcdir because PKGBUILDS need
access to noextract() files and other file not handled by by
extract_source(). (eg config files)
query.c: Fix some output formating.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Remove versioncmp.c by moving all functions to locations that make sense.
Move replacement functions (for building without glibc) into util.c where
they belong, and do proper checks for them instead of using __sun__, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unused buildtype field from pmpkg_t struct and anything associated
with it, as it is unused at the moment. If we need to readd it, it is an
easy revert of this commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
The three chk_ functions overlap for packages both in targets and in the
database. This caused the same conflict to be found in both direction
(A conflicts with B, and B conflicts with A).
This patch avoids this duplication. which shouldn't be needed, but other
changes might be required for that to work correctly.
This also has the unexpected side effect to hide the failure of sync022
pactest, for FS #7415. That's maybe not a good thing though..
Note from Dan: sync022 does succeed, but a sync023 pactest added to check
regressions also seems to pass. This may be a valid fix to this 'problem'
sync022 was meant to find.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
sync022 was added here:
39b6549655
This pactest reverses the installed package to see if it is correctly
picked, in order to test some further changes to this depcheck code that
currently makes sync022 fail.
Signed-off-by: Dan McGee <dan@archlinux.org>
Because of this commit:
ea1fef69ad
we lost a lot of gettext-ized messages on the libalpm side. Remove them
in order to clean out these files a bit.
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no real reason to burden our translators with these messages, as
anyone helping to debug these will probably want them in English.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the behaviour of makepkg so no longer stores a copy of the
source tarball in $srcdir, instead it downloads all sources to $SRCDEST
then extracts them to $srcdir.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
When running as root, we don't care if fakeroot is installed, and the user
certainly isn't "unprivileged". Cut out these warnings.
Signed-off-by: Dan McGee <dan@archlinux.org>
This defines _FILE_OFFSET_BITS == 64, which makes stat calls transparently
use stat64, etc. This allows us to support large files, such as packages
over 1 GB in size. libarchive was already correctly compiled with this macro.
Signed-off-by: Dan McGee <dan@archlinux.org>
Changed the exit code for missing deps from 1 to 127 because 1 is used
for other errors. makepkg breaks if pacman exits with 1 for any reason
other than a missing dep.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Include manpages when we ship a package tarball, and allow them to be
generated by the end user if they want by using the --enable-asciidoc option
to ./configure. This will allow us to maintain manpages in an easier to modify
format while still keeping the make dependencies to a minimum.
Signed-off-by: Dan McGee <dan@archlinux.org>
We still need some work here- we should have a repo-remove manpage link
to this one, and we should not have to struggle with asciidoc formatting
to get it to work like any other multiple-command manpage works.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Fix up the target so we rebuild the manpages when we edit the corresponding
text file.
* Add vim modelines to all of the asciidoc files ensureing the right syntax
highlighting is used and we have expandtabs turned off.
* Start making a few small changes to PKGBUILD.5 to make it pretty in both
HTML and manpage format output.
* Fix the manlink macro to include the manpage section in the link.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some asciidoc generation stuff to the doc/ Makefile.am so we can get
some manpages up and working. Add necessary stuff to gitignore, and check
in the asciidoc.conf file along with the footer for all of the manpages.
Signed-off-by: Dan McGee <dan@archlinux.org>
We shouldn't translate log messages to pacman.log so it is consistant and
can be parsed by other tools. Remove all gettext _() around these strings.
Signed-off-by: Dan McGee <dan@archlinux.org>
It is much easier for translators to deal with paragraphs as strings rather
than by lines. Take all usage and version information and convert it to this
format.
Signed-off-by: Dan McGee <dan@archlinux.org>
If we move the scripts from *.in to *.sh.in and *.py.in, gettext can pull the
required strings to translate a whole lot easier. Do this.
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the translations from src/pacman/po to just po/ so we can include the
scripts gettext translations in the same message catalog as that of the
pacman frontend. The libalpm message catalog, for now, will remain a separate
existence.
Signed-off-by: Dan McGee <dan@archlinux.org>
I ran flawfinder and sparse over the pacman source code and found a few
things that were worth fixing (and were quick fixes).
Signed-off-by: Dan McGee <dan@archlinux.org>
pactest was sleeping for 3 seconds, which is unnecessary. Reduce it to 1.5
seconds and clean up the code a bit anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
Previously, the following error was displayed even after a valid
and successful query operation on all packages,
like -Q , -Ql, -Qi, -Qil :
no targets specified (use -h for help)
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The -Ql operation is supposed to print all files but directories.
stat was used for detecting directories. However, when stat failed,
(because the file doesn't exist or is not readable), the files
were still displayed just like the others.
Now, these files are printed on stderr, with the corresponding error message.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Adds the ARCHIVE_EXTRACT_NO_OVERWRITE libarchive flags
for extracting files and directories.
This will prevent symlinks for being overwritten by directories.
All other files that need to be extracted should already have
been deleted previously by pacman.
This flag is not used for extracting files in backup array
to /tmp/alpm_XXXX, because this file is created by mkstemp first,
and so needs to be overwritten by the file from the archive.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Add the ability to check the permissions and type of a file within the
framework of pactest. Two new rules can be used:
self.addrule("FILE_TYPE=bin/foo|file")
self.addrule("FILE_MODE=bin/bar|644")
TODO: add the ability to add different types of files (eg links) via the test
package building framework, and add the ability to change the modes on files.
Signed-off-by: Dan McGee <dan@archlinux.org>
With libarchive 2.2.3 (previously 1.3.1), archive_read_extract now returns ARCHIVE_WARN
when a package is extracted as user, because for example, UID=0 or SUID bit can't be set.
This patch makes pacman not treating these warnings as errors anymore,
but simply ignoring them.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
The scriptlet calling had some unneeded complexity for the time being
which we aren't using here. Let's get rid of it until we find a good way
to implement it correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
When looking for old packages to create a delta from used bsdtar to read the
packages .PKGINFO to check it's name and arch instead of depending on the
filename of th package.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
First reported here:
http://bbs.archlinux.org/viewtopic.php?pid=261861
Newly created files were done with the standard umask, so those that are
extracted seperately and copied to a .pacnew extension will have the wrong
permissions. This should hopefully fix this.
Signed-off-by: Dan McGee <dan@archlinux.org>
The alpm_splitdep function formerly overwrote the input string, causing
a few issues. Fix this.
Signed-off-by: Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
For future possibilities, don't extract any files that start with '.'.
This will allow us to add features such as the ChangeLog viewing without
having to wait to include these files in packages, because older versions
of pacman will be forward compatable with 'hidden' files at the root level
of the package.
Signed-off-by: Dan McGee <dan@archlinux.org>
This was a bad way to fix a problem upstream. Doing this resulted in
symlink permissions being applied to files installed on the system, leaving
some binaries with 77 permission, etc.
This reverts commit 4e6b7c1cde.
* Update the mirrorlist
* Fix FS7338- the previous repo-add fix didn't quite do the job, but it
should be fixed now.
* Small updates to translations files
* Add -mtune=generic to default CFLAGS (req'd by GCC 4.2)
Refactor the goto cleanup; statements out of add.c and remove.c, and move
what the cleanup: label did into a function.
Signed-off-by: Dan McGee <dan@archlinux.org>
The last typo fix for conflicts wasn't complete,
it only fixed one occurence of the conflicts variable, instead of the two :
http://www.archlinux.org/pipermail/pacman-dev/2007-May/008222.html
This caused all conflicts statement to be ignored, so all databases
will need to be rebuilt with a fixed repo-add.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Re-add some checks for a valid target list. In addition, move variable
declarations to the most local scope possible, which should help in finding
errors that were previously uncaught.
Signed-off-by: Dan McGee <dan@archlinux.org>
Move a lot of the operations that pacman query performs into their own
functions for ease of following the flow and for possible later merges with
their sync counterparts. We need to think less in terms of operations and
more in term of overall concepts.
Also (re)introduced checks for the target list on a -Q operation, ensuring
that we only call certain query operations when it is sane to do so.
Signed-off-by: Dan McGee <dan@archlinux.org>
This function is an absolute disaster, so we'll take it one step at a time
here. This was a quick once-over of the whole thing, trying to straighten
out some of the spaghetti code and fix some mistakes that others found.
We are now down to two failing pactests again: sync300 and upgrade051.
Signed-off-by: Dan McGee <dan@archlinux.org>
As described in the bug report, installing taglib-rcc (sync900 pactest)
works fine. But installing taglib back (sync901 pactest) doesn't.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Same as remove040, with cascaded remove instead of simple remove.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This should hopefully allow multiple cache dirs to be specified in
pacman.conf and/or on the command line, and allow pacman to test
each one for the package file. The first one found to be writeable is
used as the download cache.
Signed-off-by: Dan McGee <dan@archlinux.org>
After adding a alpm_db_check() operation in the back end, we can call it
in the front end and present a user-friendly interface to it.
Inspired-by: VMiklos <vmiklos@frugalware.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Readd default logmask of ERROR and WARNING
* Remove DOWNLOAD log level as it no longer applies
* Add 'no targets' logic back in where it applies
* Switch some prints in parseconfig to ERROR
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the logmask functionality from the backend as it has been moved to
the frontend, and change the logging callback function to use pm_printf.
In addition, make much better use of va_list- use the args list instead
of a arbitrarily chosen string to print to in the logging functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
Reorder some of the initilization stuff in pacman.c, as well as remove
some code that should be reimplemented elsewhere- checking the target
list to see if it is NULL.
Change the temp printf statements in parseconfig to pm_printf as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add pm_printf, pm_fprintf, and pm_vfprintf to the pacman frontend for use by
debug printing and other output messages from pacman. These will be
incorporated into the log callback functions in the next iteration of
changes.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some 'const' keywords all over the code to make it a bit more strict on
what you can and can't do with data. This is especially important when we
return pointers to the pacman frontend- ideally this would always be
untouchable data.
Signed-off-by: Dan McGee <dan@archlinux.org>
'inline' keyword in C99 is not correctly recognized, so compilation fails on
the warning it spits. This fixes this.
Signed-off-by: Dan McGee <dan@archlinux.org>
The db variable was left unset when calling alpm_db_register, leading
to a failure to ever register a sync db. Also added a check to ensure
DBPath was set when trying to register a database.
Signed-off-by: Dan McGee <dan@archlinux.org>
Switch over to the new frontend parseconfig.
* Fix a few issues in parseconfig
* Remove unused callback upon database registration
* Remove conf file related errors from error.c/alpm.h
Signed-off-by: Dan McGee <dan@archlinux.org>
Move chomp, usecolor, and showsize out of the backend and into the
pacman frontend as they are pacman-specific options and not related
to the behavior of libalpm.
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm.h is the only "publically viewable" file, so there is no reason to have
functions in alpm.c that belong in package.c, db.c, etc. Move the functions
where they belong and leave only the library init functions in alpm.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add vim modeline to Makefile.am and configure.ac
* Fix white space in Makefile.am and configure.ac
* Add contrib/wget-xdelta.sh to EXTRA_DIST in Makefile.am
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Rearrange the script.
* Add gettext support.
* Clean up usage message.
* Add PACKAGE_BUGREPORT to substitution in scripts/Makefile.am
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove any use of the former path variables defined by the Makefiles or
config.h. These are now runtime configurable only with pacman.conf (or by
using flags on the command line).
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the defaults for RootDir, CacheDir, DBPath, and LockFile into
pacman.conf, just as LogFile was done before. Add a section to
alpm_parse_config to look for a LockFile directive.
Signed-off-by: Dan McGee <dan@archlinux.org>
Most of these new tests deal with provisions upon sync or upgrade being
changed by packages, and pacman not being smart enough to deal with
it yet.
Signed-off-by: Dan McGee <dan@archlinux.org>
* makepkg now runs with errexit (exit on syntax error) enabled
for the whole script.
* Removed unneeded setting of errexit around build().
* Added bash traps to catch TERM HUP INT signals.
* Added trap to catch unhandled/unknown errors.
* Added trap to call clean_up() when the script exits.
* Moved call to remove_deps() into clean_up().
* Moved -c/--clean code into clean_up().
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move create_xdelta() outside of fakeroot run.
* Clean up dep check functions.
* Clean up extract_sources().
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
This code depends on /etc/mtab existance, which is not very reliable in all
cases, especially in a chroot or non-Linux environment. Dump it for now
until we can find a better way.
Signed-off-by: Dan McGee <dan@archlinux.org>
Clean up pacman_query so functionality is actually in functions, similar to how
sync.c is organized. After doing this, it is easy to see similarity in the code
between sync.c and query.c, so we should be able to consolidate some of this.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Drop the --usesudo option and use it by default if running as a non-root
user. Check the usage of the --asroot option and do not allow it to be used
as a normal user. A few other small fixes, including a typo in $confdir.
Signed-off-by: Dan McGee <dan@archlinux.org>
* etc/makepkg.conf.in: Add description for xdelta.
* doc/makepkg.conf.5: Add description for xdelta.
* scripts/makepkg.in: Various clean ups.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
Also cleaned up some duplicate printf lines related to the ShowSize option.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* configure.ac: Add AC_SUBST() for ROOTDIR, PKGEXT, DBEXT so
they get exported to Makefiles.
* {makepkg,pacman}.conf.in: Remove extra / from paths.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
This change allows us to use all autoconf specified paths, most notably
$(localstatedir). It is quite a change and touches a lot of files, as
all references to the DB and cache were done with the ROOTDIR as a prefix.
* add --lock command-line option to pacman to specify the location of the
lockfile (this can now be specified at configure time by setting the
$localstatedir path).
* Rip quite a few settings out of configure.ac as they are now picked by
setting the paths during configure or make.
* Fix bug with /tmp fallback for sync downloads not working correctly
(related to root location, now the system tmp dir is used).
* Simplified the parameters to some libalpm functions, and added get/set
for the new lockfile option.
* Renamed several of the DEFS to names without the PM_ prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
Regression from 2.9.8 where a failed -Qi lookup did not return an error
on exit. The exit status is now incremented for each error encountered.
Signed-off-by: Dan McGee <dan@archlinux.org>
We already have $startdir, so this introduces two more shorthand variables
for the most commonly accessed directories.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix up everything in the etc/ directory so it is built at make-time and
not configure-time. This reduces configure generated files to just the
makefiles, which is the correct way to do things. This also allows a switch
from @@REPO@@ to the more sane @REPO@ in mirrorlist.in, and kills the
two-part generation of the mirror files.
Signed-off-by: Dan McGee <dan@archlinux.org>
This should finally get the path replacement in our scripts right. This
is the way the autoconf package itself does it and should not need much
further tweaking.
Threw in a few trailing whitespace corrections from the scripts as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
Using the autoscan tool, ensure we are doing the checks we should be doing
in configure.ac. There is still more work to do, but this is a start at
cleaning up the file a bit to make it much easier to change in the future.
Signed-off-by: Dan McGee <dan@archlinux.org>
By setting up a few more AC_SUBST macros in configure.ac, we can fill in
paths in the scripts on the fly instead of having them in multiple places.
Other small fixes:
* Fix an oops on my last commit where I had some lines stil commented.
* Fix makepkg bug where the generated package name using PKGEXT had two
periods (..).
Signed-off-by: Dan McGee <dan@archlinux.org>
Added the autoconf option std-options to the scripts/ directory, which
checks to ensure all programs have both --help and --version options. A
few things needed cleaning up to get this working. To test these types
of options, use the 'make distcheck' target.
Signed-off-by: Dan McGee <dan@archlinux.org>
GCC-4.2.0 requires -mtune=generic to produce binaries optimized for
generic i686/x86_64. By default it tries to optimize a for the host
system building the package.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Using printf we can avoid haveing to use eval_gettext and the ugly escape sequances required to use it.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
A few changes to undo my stupid mistake earlier wrt fakeroot checking,
and unify the output and usage of 'makepkg.conf'.
Signed-off-by: Dan McGee <dan@archlinux.org>
Only the following functions now run inside fakeroot
* run_build()
* tidy_install()
* create_package()
Added check for inproper use of '-F' option.
Added warning if makepkg is run as root. Added a new '--asroot' flag that
must be passed if you wish to run makepkg as the root user.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
-Qee now lists "orphans" the way pacman used to - that
is, -Qe lists packages required by nothing that were
installed as a dependency, but -Qee lists all packages
not required by something else.
Also, I snuck in a compile fix for my real_path cleanup earlier, heh
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Small change (addition of a 'strreplace' function) which replaces
any $repo tokens found in a server line with the name of the repo
or section being processed.
While this is more simplistic than suggestions on flyspray, it works
and I think it is cleaner. Merits can be discussed further.
Ref: FS#6389
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Reorder package version checking so there is no output when a
package is listed in IgnorePkg.
Closes FS#7111
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Removed some unneeded path munging so that our relative
paths resolve properly. This closes FS#7068
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Fix for FS#7133 - when DB scanning finds an invalid named entry,
scanning is currently aborted. Instead we will simply skip it
and find the next valid package.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Simple clean up for the rest of the code, which also prevents a little
libdownload bug relating to '//' appearing in URLs.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Hackish fix to ensure libarchive extracts files and dirs with the right
permissions. For some reason extracting /tmp on install wasn't handled properly
by librachive, so an explicit chmod will fix this.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Hackish fix to ensure libarchive extracts files and dirs with the right
permissions. For some reason extracting /tmp on install wasn't handled properly
by librachive, so an explicit chmod will fix this.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
* change "Tidying Install" message to msg instead of msg2
* Fix quoting issues in usage output
* Remove LANG and friends unsetting- this should be done in the offending
package builds
* Check for defined $BUILDSCRIPT, since it was moved to makepkg.conf
Signed-off-by: Dan McGee <dan@archlinux.org>
Added 'LC_ALL= LANG=' to find commands for stripping symbols from binaries/libraries.
This stops the greps failing if LC_ALL or LANG != en_US|C|POSIX.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
The following sets of commands were moved into tidy_install()
* Remove info/doc files.
* Move usr/share/man to usr/man
* Compress man pages.
* Strip debug symbols from binaries/libraries.
* Remove libtool *.la files.
* Remove empty directories.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
These should test various aspects of the DB when dealing with requiredby
entries. At least one fails without Nagy's alpm_depcmp patch.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old function did too much on its own; let alpm_depcmp do the hard
work. This will allow for future versioned provisions if necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
We had many unnecessary casts, most of them dealing with malloc and
other memory allocations. The variable type should take care of it;
no need to do it explicitly. In addition, I caught a const error while
removing the casts.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch adds a -z|--showsize option to the -Q and -S commands. The
option displays the size of individual packages. This is something that
I have wanted for a while, and there is a feature request for it.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow IgnorePkg (or --ignore) to work for _either_ side of a
replacement. For example, if 'foo' is set to replace 'bar',
ignoring either package will skip this replacement.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
* Remove some unnecessary conditional compiling in util.h- move the
functions tha required it to trans.c (along with a bunch of new header
includes).
* Clean up util.h a bit- remove some header includes, remove universal
libarchive include and only put it in the files that need it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of using libdownload's default user agent string, make one of
our own.
Format:
Pacman/3.0.1 (Linux i686 2.6.21-rc7-ARCH; en_US.utf8) libalpm/1.0.0
Signed-off-by: Dan McGee <dan@archlinux.org>
This should make it easier to see exactly where a segfault occurs; old
method was prone to output flushing issues.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove inclusion of libintl.h from all files, because we can do it once
in util.c where the _() macro is defined.
Signed-off-by: Dan McGee <dan@archlinux.org>
* A few quick newline fixes, mostly related to sync operations.
* Moved get_update_timediff to callback.c as it is not used outside of
that file.
Signed-off-by: Dan McGee <dan@archlinux.org>
Somehow missed this earlier when changing everything to types.
unsigned short -> pmloglevel_t wherever necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that we got rid of the ERR and WARN macros, compilation with
-pedantic turned on works with only minor changes.
Signed-off-by: Dan McGee <dan@archlinux.org>
All ERR() calls have been replaced with fprintf(stderr, ...).
Still to be done- fix all the newline issues that are sure to pop up. What fun!
Signed-off-by: Dan McGee <dan@archlinux.org>
Rip out this stuff from output.c and output.h for the next step of ripping all ERR
output from the pacman front end.
This commit will NOT compile.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step of converting output to standard functions such as printf, and
eventually allowing compiliation with the -pedantic flag as is done on the libalpm
side.
Signed-off-by: Dan McGee <dan@archlinux.org>
Some more major code reorginization here. The download progress callback
function has been renamed and moved to callback.c, which is the former
trans.c with the download and log callbacks added. In addition, this allows
util.c to be cleaned up as fill_progress can now be static in callback.c.
We've also cut two more source files out.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Cleaned up more of the header #includes, and got rid of a lot of stuff
that was due to trying to make it compile on BSD/Darwin/CYGWIN. We can
add it later but lets keep it simple for now and do it in seperate files
if possible later.
* Removed a lot of #define MACROS. Some were not even used, and others were
only used a few times.
Signed-off-by: Dan McGee <dan@archlinux.org>
Enable an -Ss operation to work without a target list. This allows all package information
to be printed (as opposed to individual -Sl operations on repositories).
Signed-off-by: Dan McGee <dan@archlinux.org>
Unification and cleanup of the add.c and remove.c code. It looks remarkably
similar, so this may be a candidate for functionalization at a later time.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Remove libintl.h from most files, as we only need to include it once in
util.h where _() is defined.
* Remove other unnecessary header inclusions.
* Remove a macro that was only used once and replaced it with actual code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Move pacman_upgrade into add.c, at least for now. It really doesn't need
its own file. For the long term, we may want to move this whole file
back to upgrade.c if we deprecate the add operation.
Signed-off-by: Dan McGee <dan@archlinux.org>
Having a seperate header file for add, remove, query, etc. seemed overkill.
Merge them all into a common pacman.h and fix the necessary #includes.
Signed-off-by: Dan McGee <dan@archlinux.org>
In order to get more reliable message statistics, I updated all of the
po files by first doing a make *.pot-update followed by a make. I am
holding off on committing the pot files as this causes issues with make
constantly wanting to rebuild them.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove grep calls from stripping binaries and libraries, which will
not work with localized strings. Clean up the find usage as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes FS #4404 as well as adding support for future protocols by
generalizing the concept of a download agent and allowing a downloader to
be specified for each protocol.
Original work done by Andrew Fyfe <andrew@neptune-one.net>.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Prefer case-insensitive config settings. In the future case-insensitivity
may be enforced.
* Provides a fix for the tr_TR locale by checking the case-insensitive version
first. This is more elegant than setting the 'C' locale for tr_TR.
Also added a 'RootDir' config option to match CacheDir and DBPath
Moved the following variables into /etc/makepkg.conf
* BUILDSCRIPT
* PKGEXT
* DB_COMPRESSION
* DB_CHECKSUMS
Cleaned up sourcing of /etc/makepkg.conf in scripts and source
~/.makepkg.conf if it exists.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add gettext support to makepkg. Still to do- figure out for sure what
textdomain the translations should go in (perhaps share with pacman?), and
ensure this doesn't break anything.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add a localize function to do what was done before in main wrt i18n
initialization.
* Added Doxygen comments to all functions in pacman.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
Several important paths, file locations, and extensions were #define-d in the
source code instead of being configurable. This moves all of these to
the configure script where they can be picked upon running ./configure. We
may later want to make some of these even more visible and move them to
pacman.conf.
Signed-off-by: Dan McGee <dan@archlinux.org>
CFLAGS are used at build time, not configure time. We don't need to get the
CFLAGS from the environment during configure.
Signed-off-by: Dan McGee <dan@archlinux.org>
Author: Aaron Griffin <aaronmgriffin@gmail.com>
Date: Thu Mar 29 21:30:40 2007 -0500
repo-add leaves .PKGINFO in the current directory
* Misuse of 'tar xf', which should be 'tar tf'
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Date: Thu, 29 Mar 2007 11:11:36 +0100
Subject: [PATCH 1/1] Fix bug where makepkg can't extract .tar.Z archives.
For some reason 'tar -xf' doesn't work with .tar.Z, you need to use
'tar -xzf' to extract the archive.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Date: Thu, 29 Mar 2007 11:11:36 +0100
Subject: [PATCH 1/1] Fix bug where makepkg can't extract .tar.Z archives.
For some reason 'tar -xf' doesn't work with .tar.Z, you need to use
'tar -xzf' to extract the archive.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
We haven't done a whole lot with Doxygen so far, so this updates some of the
things that have changed a lot- namely, the now public exposure of alpm_list.
All functions in this file have now been Doxygen commented, and a few other
things in alpm.c were fixed as well. In addition, the Doxygen config file
was updated.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Unify the main usage instructions to look a bit more like the rest
with a usage and options line.
* Fix some of the spacing from the de-gettexting done yesterday.
Signed-off-by: Dan McGee <dan@archlinux.org>
* --ignore was being ignored (haha) on sysupgrade when a package was listed
as being a force upgrade. This adds a prompt to the user in this case asking
what to do.
Signed-off-by: Dan McGee <dan@archlinux.org>
* --ignore was being ignored (haha) on sysupgrade when a package was listed
as being a force upgrade. This adds a prompt to the user in this case asking
what to do.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move all .cvsignore files to .gitignore for switch in VCS. In addition,
delete ones that were unnecessary because they only contained Makefile
and Makefile.am.
Signed-off-by: Dan McGee <dan@archlinux.org>
work of fixing these in the translation files, and I removed a few fuzzys
while doing so. If any more patches for translations come, try to do it
against these files.
* Ran msgmerge on all po files from new pot files, but did not check in the
updated pot files as that just causes problems.
* Updated Italian translation
Giovanni Scafora <linuxmania@gmail.com>
* Updated Russian translation, added libalpm partial translation
Владимир Байраковский <4rayven@gmail.com>
* Updated Hungarian translation
Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
* Updated French translation
solsTiCe d'Hiver <solstice.dhiver@laposte.net>
Thanks again guys!
* More significant error messages when -Qo fails
* Potential fix for reported error that pacman indicates corrupt packages
when space is full on the cache dir
Giovanni Scafora <linuxmania@gmail.com>
* Many minor issues mentioned by Scott Horowitz <stonecrest@gmail.com>.
- extra 'done' text in --noprogressbar output
- missing flags in the pacman.8 manpage
- unclear text in --noconfirm help description
issues, this should fix it. Progress bars now go from displaying, to showing
percent only, to not displaying at all. Changed unsigned -> signed to
prevent wraparound errors in integer comparison.
duplicated.
* Updated the util Makefile.am to link with the proper libalpm.la.
* Fixed bitmasking issues in be_files.c and db.h.
* Rankmirrors updates from James Rosten (with some cleaning up of my own).
KeyboardInterrupts are now handled gracefully.
(Because we are in a string freeze, I did not add "to the transaction" to
the original string but kept it in your translation)
Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
the alpm strcmp operation which takes void* references.
* We had this great visibility patch, but never actually took advantage of
it. Added the right compile flag to make it work and added some more
SYMEXPORTs where necessary to have a successful compile.
Giovanni Scafora <linuxmania@gmail.com>
* long -> float conversion for package size output (which still may be the
wrong size, this needs to be looked at)
- Check EACCES in can_remove_file, to verify - we're only checking for a
read-only FS here... if write permissions fail, we can still remove it
- Switched the message when creating DB directories from an error to a debug
message
* Fix the dep tests once and for all (it wasn't working for provides=()
packages)
Giovanni Scafora <linuxmania@gmail.com>
* Changed default SRCDEST in makepkg.conf. Two reasons:
1) consistency with PKGDEST in /home/packages
2) building packages as root is NOT recommended, so no reason to ever
encourage this use by caching source in a dir with root permissions
Yes, we may all do this differently and build our packages in other
directories. But that is why they are variables and can be set anyway.
* Greatly simplify and de-obfuscate the autogen and autoclean code.
* Add a bunch of the autotools required files to the repository. This
will give us consistency (a novel idea) across all builds, and allow
for much more recent versions of config.guess and config.sub to be used.
* Some header cleanup on the pacman side of things - we had alpm.h instead
alpm_list.h in a few headers.
* removed an extra slash in path-building snprintf in server.c.
reordering and adding ones that were forgotten (noticed when trying to
compile after reordering).
* Updated the HACKING file to include information on #include usage.
* print -> vprint in "making dir" function in pactest.
* Added a custom 'mkdir' function which makes parents and doesn't fail on
existence
* Added output for 'SKIP' messages (it did not indicate WHY it was skipped)
* Added the ability to generate DB packages in the sync dir (not the cache dir)
for testing downloading. (self.cachepkgs = False)
* Added pmtest.path for the full path to the package file
* link:http://projects.archlinux.org/abs.git/[abs] - ABS (Arch Build System), scripts to download & use the Arch Linux PKGBUILD tree
* link:http://projects.archlinux.org/dbscripts.git/[dbscripts] - scripts used by Arch Linux to manage the main package repositories
* link:http://projects.archlinux.org/devtools.git/[devtools] - tools to assist in packaging and dependency checking
* link:http://projects.archlinux.org/namcap.git/[namcap] - a package analysis utility written in python
* link:http://projects.archlinux.org/srcpac.git/[srcpac] - a bash build-from-source pacman wrapper
Bugs
----
If you find bugs (which is quite likely), please email them to the pacman-dev
mailing last at mailto:pacman-dev@archlinux.org[] with specific information
such as your commandline, the nature of the bug, and even the package database
if it helps.
You can also post a bug to the Arch Linux bug tracker
link:http://bugs.archlinux.org/index.php?project=3[Flyspray]. Be sure to file
bugs under the Pacman project.
Pacman/libalpm in the Wild
--------------------------
Although Arch Linux is the primary user of pacman and libalpm, other
distributions and projects also use pacman as a package management tool. In
addition, there have been several projects started to provide a frontend GUI to
pacman and/or libalpm.
Arch derivatives:
* link:http://archie.dotsrc.org/[Archie] - Arch Live on steroids
* link:http://www.faunos.com/[FaunOS] - A portable, fully integrated operating system based on Arch Linux
* link:http://larch.berlios.de/[larch] - A live CD/DVD/USB-stick construction kit for Arch Linux
Other distributions:
* link:http://www.delilinux.org/[DeLi Linux] - "Desktop Light" Linux, a Linux distribution for old computers
* link:http://www.frugalware.org/[Frugalware Linux] - A general purpose Linux distribution for intermediate users (pacman is forked and maintained separately)
Pacman/libalpm frontends:
* link:http://shaman.iskrembilen.com/[Shaman] - A GUI frontend using Qt and libalpm
Copyright
---------
pacman is Copyright (C) 2006-2011 Pacman Development Team
<pacman-dev@archlinux.org> and Copyright (C) 2002-2006 Judd Vinet
<jvinet@zeroflux.org> and is licensed through the GNU General Public License,
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
