yaml (#32)

pkg2yaml: fixes

deploypkg: fix remove

pkg2yaml: change format

Makefile

@@ -1,4 +1,4 @@
-VERSION=0.14
+VERSION=0.19
 
 CHROOT_VERSION=0.10
 
@@ -10,11 +10,10 @@ LIBDIR = $(PREFIX)/lib
 DATADIR = $(PREFIX)/share
 CPIODIR = $(SYSCONFDIR)/initcpio
 
-CONF = \
-	data/artools.conf
+BASE_CONF = \
+	data/conf/artools-base.conf
 
 BASE_BIN = \
-	bin/base/signfile \
 	bin/base/chroot-run \
 	bin/base/mkchroot \
 	bin/base/basestrap \
@@ -27,7 +26,10 @@ BASE_LIBS = \
 BASE_UTIL = lib/util-base.sh
 
 BASE_DATA = \
-	$(wildcard data/base/pacman*.conf)
+	$(wildcard data/pacman/pacman*.conf)
+
+PKG_CONF = \
+	data/conf/artools-pkg.conf
 
 PKG_BIN = \
 	bin/pkg/buildpkg \
@@ -41,7 +43,9 @@ PKG_BIN = \
 	bin/pkg/links-add \
 	bin/pkg/checkpkg \
 	bin/pkg/finddeps \
-	bin/pkg/find-libdeps
+	bin/pkg/find-libdeps \
+	bin/pkg/batchpkg \
+	bin/pkg/signpkg
 
 LN_COMMITPKG = \
 	extrapkg \
@@ -86,16 +90,19 @@ LN_DEPLOYPKG = \
 	deploypkg-gnome-wobble
 
 PKG_LIBS = \
-	$(wildcard lib/pkg/*)
+	$(wildcard lib/pkg/*.sh)
 
 PKG_UTIL = lib/util-pkg.sh
 
 PKG_DATA = \
-	data/pkg/makepkg.conf
+	data/pacman/makepkg.conf
 
 PATCHES = \
 	$(wildcard data/patches/*.patch)
 
+ISO_CONF = \
+	data/conf/artools-iso.conf
+
 ISO_BIN = \
 	bin/iso/buildiso \
 	bin/iso/deployiso
@@ -109,9 +116,6 @@ ISO_LIBS = \
 
 ISO_UTIL = lib/util-iso.sh
 
-ISO_DATA = \
-	data/iso/mkinitcpio.conf
-
 DIRMODE = -dm0755
 FILEMODE = -m0644
 MODE =  -m0755
@@ -151,7 +155,7 @@ clean:
 
 install_base:
 	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
-	install $(FILEMODE) $(CONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
+	install $(FILEMODE) $(BASE_CONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 
 	install $(DIRMODE) $(DESTDIR)$(BINDIR)
 	install $(MODE) $(BASE_BIN) $(DESTDIR)$(BINDIR)
@@ -164,6 +168,9 @@ install_base:
 	install $(FILEMODE) $(BASE_DATA) $(DESTDIR)$(DATADIR)/$(TOOLS)
 
 install_pkg:
+	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
+	install $(FILEMODE) $(PKG_CONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
+
 	install $(DIRMODE) $(DESTDIR)$(BINDIR)
 	install $(MODE) $(PKG_BIN) $(DESTDIR)$(BINDIR)
 
@@ -189,6 +196,9 @@ install_cpio:
 	+make CPIODIR=$(CPIODIR) DESTDIR=$(DESTDIR) -C initcpio install
 
 install_iso: install_cpio
+	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
+	install $(FILEMODE) $(ISO_CONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
+
 	install $(DIRMODE) $(DESTDIR)$(BINDIR)
 	install $(MODE) $(ISO_BIN) $(DESTDIR)$(BINDIR)
 
@@ -198,9 +208,6 @@ install_iso: install_cpio
 	install $(FILEMODE) $(ISO_UTIL) $(DESTDIR)$(LIBDIR)/$(TOOLS)
 	install $(FILEMODE) $(ISO_LIBS) $(DESTDIR)$(LIBDIR)/$(TOOLS)/iso
 
-	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
-	install $(FILEMODE) $(ISO_DATA) $(DESTDIR)$(DATADIR)/$(TOOLS)
-
 install: install_base install_pkg install_iso
 
 .PHONY: all clean install install_base install_pkg install_iso

README.md

@@ -28,7 +28,7 @@ artools
 - pkg:
   * namcap
   * git-subrepo
-  * jshon
+  * jq
 
 - iso:
   * dosfstools
@@ -39,15 +39,18 @@ artools
 
 #### Configuration
 
-artools.conf is the central configuration file for artools.
-By default, the config is installed in
+artools-{base,pkg,iso}.conf are the configuration files for artools.
+By default, the config files are installed in
 
-    /etc/artools/artools.conf
+```bash
+/etc/artools/artools-{base,pkg,iso}.conf
+```
 
-A user artools.conf can be placed in
-
-    $HOME/.config/artools/artools.conf
+A user artools-{base,pkg,iso}.conf can be placed in
 
+```bash
+$HOME/.config/artools/artools-{base,pkg,iso}.conf
+```
 
 If the userconfig is present, artools will load the userconfig values, however, if variables have been set in the systemwide
 
@@ -55,13 +58,17 @@ These values take precedence over the userconfig.
 Best practise is to leave systemwide file untouched.
 By default it is commented and shows just initialization values done in code.
 
-Tools configuration is done in artools.conf or by args.
-Specifying args will override artools.conf settings.
+Tools configuration is done in artools-{base,pkg,iso}.conf or by args.
+Specifying args will override artools-{base,pkg,iso}.conf settings.
 
 Both, pacman.conf and makepkg.conf for chroots are loaded from
 
-    /usr/share/artools/{makepkg,pacman-*}.conf
+```bash
+usr/share/artools/{makepkg,pacman-*}.conf
+```
 
 and can be overridden dropping them in
 
-    $HOME/.config/artools/
+```bash
+$HOME/.config/artools/
+```

bin/base/artools-chroot.in

@@ -46,10 +46,6 @@ select_os(){
     fi
 }
 
-load_user_info
-
-load_config "${USERCONFDIR}/artools/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-
 automount=false
 
 usage() {

bin/base/basestrap.in

@@ -46,6 +46,7 @@ newroot=/mnt
 hostcache=0
 copykeyring=1
 copymirrorlist=1
+pacmode=-Sy
 
 usage() {
     echo "usage: ${0##*/} [options] root [packages...]"
@@ -54,6 +55,7 @@ usage() {
     echo " -G               Avoid copying the host's pacman keyring to the target"
     echo " -i               Avoid auto-confirmation of package selections"
     echo " -M               Avoid copying the host's mirrorlist to the target"
+    echo ' -U               Use pacman -U to install packages'
     echo " -h               Print this help message"
     echo ''
     echo ' basestrap installs packages to the specified new root directory.'
@@ -65,7 +67,7 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts=':C:cGiM'
+opts=':C:cGiMU'
 
 while getopts ${opts} arg; do
     case "${arg}" in
@@ -74,6 +76,7 @@ while getopts ${opts} arg; do
         i) interactive=1 ;;
         G) copykeyring=0 ;;
         M) copymirrorlist=0 ;;
+        U) pacmode=-U ;;
         :) echo "invalid argument ${arg}:$OPTARG"; usage 1;;
         ?) usage 0 ;;
     esac
@@ -109,7 +112,7 @@ if (( copykeyring ));then
 fi
 
 msg2 'Installing packages to %s' "$newroot"
-if ! pacman -r "$newroot" -Sy "${pacman_args[@]}"; then
+if ! unshare --fork --pid pacman -r "$newroot" $pacmode "${pacman_args[@]}"; then
     die 'Failed to install packages to new root'
 fi
 

bin/base/chroot-run.in

@@ -23,6 +23,8 @@ umask 0022
 working_dir=''
 files=()
 
+mount_args=()
+
 usage() {
     echo "Usage: ${0##*/} [options] working-dir [run arguments]"
     echo "A wrapper around chroot. Provides support for pacman."
@@ -33,16 +35,15 @@ usage() {
     echo '    -c <dir>      Set pacman cache'
     echo '    -f <file>     Copy file from the host to the chroot'
     echo '    -s            Do not run setarch'
-    echo '    -r <list>     Bind mountargs ro'
-    echo '    -w <list>     Bind mountargs rw'
-    echo '                  List format [src1:target1 ... srcN:targetN]'
+    echo '    -b <list>     Bind mountargs'
+    echo '                  List format [mntarg1:src1:dest1 ... mntargN:srcN:destN]'
     echo '    -h            This message'
     exit 1
 }
 
 orig_argv=("$0" "$@")
 
-opts='hC:M:c:r:w:f:s'
+opts='hC:M:c:b:f:s'
 
 while getopts ${opts} arg; do
     case "${arg}" in
@@ -51,8 +52,7 @@ while getopts ${opts} arg; do
         c) cache_dirs+=("$OPTARG") ;;
         f) files+=("$OPTARG") ;;
         s) nosetarch=1 ;;
-        r) bindmounts_ro=("$OPTARG") ;;
-        w) bindmounts_rw=("$OPTARG") ;;
+        b) bindmounts=("$OPTARG"); mount_args+=(${bindmounts[@]}) ;;
         h|?) usage ;;
         *) error "invalid argument '$arg'"; usage ;;
     esac
@@ -76,17 +76,23 @@ fi
 
 host_mirrors=($($pacconf_cmd --repo world Server 2> /dev/null | sed -r 's#(.*/)world/os/.*#\1$repo/os/$arch#'))
 
+for host_mirror in "${host_mirrors[@]}"; do
+    if [[ $host_mirror == *file://* ]]; then
+        host_mirror=$(echo "$host_mirror" | sed -r 's#file://(/.*)/\$repo/os/\$arch#\1#g')
+        info "host mirror: %s" "$host_mirror"
+        in_array "$host_mirror" "${cache_dirs[@]}" || cache_dirs+=("$host_mirror")
+    fi
+done
+
 while read -r line; do
     mapfile -t lines < <($pacconf_cmd --config "${pac_conf:-$working_dir/etc/pacman.conf}" \
-        --repo $line Server | sed -r 's#(.*/)[^/]+/os/.+#\1$repo/os/$arch#')
-    if [[ ${lines[0]} != ${host_mirrors[0]} ]]; then
-        for line in "${lines[@]}"; do
-            if [[ $line = file://* ]]; then
-                line=${line#file://}
-                in_array "$line" "${cache_dirs[@]}" || cache_dirs+=("$line")
-            fi
-        done
-    fi
+        --repo $line Server | sed -r 's#(.*/)[^/]+/os/.+#\1#')
+    for line in "${lines[@]}"; do
+        if [[ $line = file://* ]]; then
+            line=${line#file://}
+            in_array "$line" "${cache_dirs[@]}" || cache_dirs+=("$line")
+        fi
+    done
 done < <($pacconf_cmd --config "${pac_conf:-$working_dir/etc/pacman.conf}" --repo-list)
 
 copy_hostconf () {
@@ -95,9 +101,9 @@ copy_hostconf () {
 
     printf 'Server = %s\n' "${host_mirrors[@]}" >"$working_dir/etc/pacman.d/mirrorlist"
 
-    [[ -n $pacman_conf ]] && cp $pacman_conf "$1/etc/pacman.conf"
+    [[ -n $pacman_conf ]] && cp $pacman_conf "${working_dir}/etc/pacman.conf"
 
-    [[ -n $makepkg_conf ]] && cp $makepkg_conf "$1/etc/makepkg.conf"
+    [[ -n $makepkg_conf ]] && cp $makepkg_conf "${working_dir}/etc/makepkg.conf"
 
     local file
     for file in "${files[@]}"; do
@@ -105,36 +111,31 @@ copy_hostconf () {
         cp -T "$file" "$working_dir$file"
     done
 
-    sed -r "s|^#?\\s*CacheDir.+|CacheDir = ${cache_dirs[*]}|g" -i "$1/etc/pacman.conf"
+    sed -r "s|^#?\\s*CacheDir.+|CacheDir = ${cache_dirs[*]}|g" -i "${working_dir}/etc/pacman.conf"
 }
 
+mount_args+=("-B:${cache_dirs[0]//:/\\:}:${cache_dirs[0]//:/\\:}" "-B:/etc/hosts:/etc/hosts")
+
+for cache_dir in "${cache_dirs[@]:1}"; do
+    mount_args+=("-Br:${cache_dir//:/\\:}:${cache_dir//:/\\:}")
+done
+
 chroot_extra_mount() {
-    chroot_add_resolv_conf "$1"
-    chroot_mount "/etc/hosts" "$1/etc/hosts" -B
-    chroot_mount "${cache_dirs[0]}" "$1${cache_dirs[0]}" -B
-    if [[ -e /etc/localtime ]];then
-        [[ -e $1/etc/localtime ]] || touch $1/etc/localtime
-        chroot_mount "/etc/localtime" "$1/etc/localtime" -B
+    chroot_add_resolv_conf "${working_dir}"
+
+    for arg in ${mount_args[@]}; do
+        local flag=${arg%%:*}
+        local dest=${arg##*:}
+        local src=${arg%:*}
+        src=${src#*:}
+        chroot_mount "${src}" "${working_dir}${dest}" "${flag}"
+    done
+}
+
+sync_host_localtime(){
+    if [[ -e /etc/localtime ]]; then
+        cp -L /etc/localtime "${working_dir}"/etc/localtime
     fi
-
-    for cache_dir in ${cache_dirs[@]:1}; do
-        chroot_mount "$cache_dir" "$1${cache_dir}" -Br
-    done
-
-    for m in ${bindmounts_ro[@]}; do
-        chroot_mount "${m%%:*}" "$1${m##*:}" -Br
-    done
-
-    for m in ${bindmounts_rw[@]}; do
-        chroot_mount "${m%%:*}" "$1${m##*:}" -B
-    done
-
-    for host_mirror in "${host_mirrors[@]}"; do
-        if [[ $host_mirror == *file://* ]]; then
-            host_mirror_path=$(echo "$host_mirror" | sed -r 's#file://(/.*)/\$repo/os/\$arch#\1#g')
-            chroot_mount "$host_mirror_path" "$1$host_mirror_path" -Br
-        fi
-    done
 }
 
 umask 0022
@@ -146,11 +147,13 @@ elif [[ $(cat "$working_dir/.artools") != ${CHROOTVERSION} ]]; then
     die "chroot '%s' is not at version %s. Please rebuild." "$working_dir" "${CHROOTVERSION}"
 fi
 
+#sync_host_localtime
+
 chroot_api_mount "${working_dir}" || die "failed to setup API filesystems in chroot %s" "${working_dir}"
 
-chroot_extra_mount "${working_dir}"
+chroot_extra_mount
 
-copy_hostconf "${working_dir}"
+copy_hostconf
 
 eval $(grep '^CARCH=' "$working_dir/etc/makepkg.conf")
 

bin/base/mkchroot.in

@@ -15,6 +15,7 @@
 . @libdir@/artools/util-base.sh
 
 working_dir=''
+umode=''
 
 files=()
 chroot_args=()
@@ -22,6 +23,7 @@ chroot_args=()
 usage() {
     echo "Usage: ${0##*/} [options] working-dir package-list..."
     echo ' options:'
+    echo '    -U            Use pacman -U to install packages'
     echo '    -C <file>     Location of a pacman config file'
     echo '    -M <file>     Location of a makepkg config file'
     echo '    -c <dir>      Set pacman cache'
@@ -33,10 +35,11 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='hC:M:c:f:s'
+opts='hUC:M:c:f:s'
 
 while getopts ${opts} arg; do
     case "${arg}" in
+        U) umode=U ;;
         C) pacman_conf="$OPTARG" ;;
         M) makepkg_conf="$OPTARG" ;;
         c) cache_dir="$OPTARG" ;;
@@ -45,8 +48,10 @@ while getopts ${opts} arg; do
         h|?) usage ;;
         *) error "invalid argument '%s'" "$arg"; usage ;;
     esac
-    chroot_args+=("-$arg")
-    [[ -v OPTARG ]] && chroot_args+=("$OPTARG")
+    if [[ $arg != U ]]; then
+        chroot_args+=("-$arg")
+        [[ -v OPTARG ]] && chroot_args+=("$OPTARG")
+    fi
 done
 shift $(($OPTIND - 1))
 
@@ -88,7 +93,7 @@ for f in "${files[@]}"; do
     cp "$f" "$working_dir$f"
 done
 
-basestrap -Mc ${pacman_conf:+-C "$pacman_conf"} "$working_dir" \
+basestrap -${umode}Mc ${pacman_conf:+-C "$pacman_conf"} "$working_dir" \
     ${cache_dirs[@]/#/--cachedir=} "$@" || die 'Failed to install all packages'
 
 printf '%s.UTF-8 UTF-8\n' en_US de_DE > "$working_dir/etc/locale.gen"

bin/base/signfile.in

@@ -1,35 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-. @libdir@/artools/util-base.sh
-
-load_user_info
-
-load_vars "${USERCONFDIR}/pacman/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
-
-file_to_sign="$1"
-
-if [ ! -e "$1" ]; then
-    error "%s does not exist!" "$file_to_sign"
-    exit 1
-fi
-
-if [[ -n "${BUILDBOT_GPGP}" ]]; then
-    msg2 "Signing [%s]" "${file_to_sign##*/}"
-    gpg --batch --passphrase "${BUILDBOT_GPGP}" --detach-sign "$file_to_sign"
-else
-    msg2 "Signing [%s] with key %s" "${file_to_sign##*/}" "${GPGKEY}..."
-    gpg --detach-sign --use-agent -u "${GPGKEY}" "$file_to_sign"
-fi

bin/iso/buildiso.in

@@ -12,9 +12,10 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
 . @libdir@/artools/util-iso.sh
 
+prepare_artools
+
 gen_iso_fn(){
     local vars=("artix") name
     vars+=("${PROFILE}")
@@ -33,7 +34,7 @@ gen_iso_fn(){
 prepare_build(){
     timer_start=$(get_timer)
 
-    load_profile "${PROFILE}"
+    load_profile
 
     local pacman_conf pac_file="pacman-default.conf"
 
@@ -42,19 +43,24 @@ prepare_build(){
     esac
 
     pacman_conf="${DATADIR}/$pac_file"
-    [[ -f ${USERCONFDIR}/artools/$pac_file ]] && pacman_conf="${USERCONFDIR}/artools/$pac_file"
+    [[ -f ${USER_CONF_DIR}/$pac_file ]] && pacman_conf="${USER_CONF_DIR}/$pac_file"
 
     iso_file=$(gen_iso_fn).iso
 
     iso_label="ARTIX_$(date +%Y%m)"
 
     basestrap_args+=(-C ${pacman_conf})
-    work_dir=${CHROOTS_ISO}/${PROFILE}/${ARCH}
+    work_dir=${CHROOTS_ISO}/${PROFILE}/artix
+
+    prepare_dir "${ISO_POOL}"
 
     iso_dir="${ISO_POOL}/${PROFILE}"
 
     iso_root=${CHROOTS_ISO}/${PROFILE}/iso
+    live_dir=/LiveOS
+
     mnt_dir=${CHROOTS_ISO}/${PROFILE}/mnt
+
     prepare_dir "${mnt_dir}"
     prepare_dir "${iso_dir}"
     prepare_dir "${iso_root}"
@@ -73,6 +79,44 @@ display_settings(){
     show_profile
 }
 
+mk_squash(){
+    local timer=$(get_timer)
+    make_sfs "${work_dir}/rootfs"
+    [[ -d "${work_dir}/livefs" ]] && make_sfs "${work_dir}/livefs"
+    show_elapsed_time "${FUNCNAME}" "${timer}"
+}
+
+mk_iso(){
+    touch "${iso_root}/.artix"
+    msg "Making bootable image"
+    # Sanity checks
+    [[ ! -d "${iso_root}" ]] && return 1
+    if [[ -f "${iso_dir}/${iso_file}" ]]; then
+        msg2 "Removing existing bootable image..."
+        rm -rf "${iso_dir}/${iso_file}"
+    fi
+    assemble_iso
+    chown -R "${OWNER}:$(id --group ${OWNER})" "${iso_dir}"
+}
+
+mk_boot(){
+    local timer=$(get_timer)
+    run_safe "make_bootfs"
+    run_safe "make_grub"
+    show_elapsed_time "${FUNCNAME}" "${timer}"
+}
+
+mk_chroots(){
+    local timer=$(get_timer)
+    load_pkgs "${ROOT_LIST}" "${INITSYS}"
+    run_safe "make_rootfs"
+    if [[ -n ${LIVE_LIST} ]]; then
+        load_pkgs "${LIVE_LIST}" "${INITSYS}"
+        run_safe "make_livefs"
+    fi
+    show_elapsed_time "${FUNCNAME}" "${timer}"
+}
+
 build(){
     msg "Start building [%s]" "${PROFILE}"
     if ${clean_first};then
@@ -93,32 +137,45 @@ build(){
         rm -rf --one-file-system "${iso_root}"
     fi
 
-    if ${iso_only}; then
-        [[ ! -d ${work_dir} ]] && die "Create images: %s -p %s -x" "${cmd}" "${PROFILE}"
-        compress_images
-        exit 1
-    fi
-    if ${images_only}; then
-        prepare_images
-        warning "Continue compress: %s -p %s -zc ..." "${cmd}" "${PROFILE}"
-        exit 1
-    else
-        prepare_images
-        compress_images
-    fi
+    case true in
+        ${chroot_only})
+            mk_chroots
+            warning "Continue squash: %s -p %s -sc ..." "${cmd}" "${PROFILE}"
+            exit 1
+        ;;
+        ${boot_only})
+            mk_boot
+            warning "Continue iso: %s -p %s -zc ..." "${cmd}" "${PROFILE}"
+            exit 1
+        ;;
+        ${squash_only})
+            mk_squash
+            warning "Continue boot: %s -p %s -bc ..." "${cmd}" "${PROFILE}"
+            exit 1
+        ;;
+        ${iso_only})
+            [[ ! -d ${work_dir} ]] && die "Create chroot: %s -p %s -x" "${cmd}" "${PROFILE}"
+            mk_iso
+        ;;
+        *)
+            mk_chroots
+            mk_boot
+            mk_squash
+            mk_iso
+        ;;
+    esac
     msg "Finished building [%s]" "${PROFILE}"
     show_elapsed_time "${FUNCNAME}" "${timer_start}"
 }
 
-load_user_info
-
-load_config "${USERCONFDIR}/artools/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-
 clean_first=true
 pretend=false
-images_only=false
+chroot_only=false
 iso_only=false
 persist=false
+use_dracut=false
+squash_only=false
+boot_only=false
 
 basestrap_args=(-GMc)
 cmd=${0##*/}
@@ -134,13 +191,16 @@ usage() {
     echo "                       [default: ${ISO_POOL}]"
     echo '    -i <name>          Init system to use'
     echo "                       [default: ${INITSYS}]"
-    echo '    -g <key>           The gpg key for sfs signing'
+    echo '    -g <key>           The gpg key for img signing'
     echo "                       [default: ${GPG_KEY}]"
     echo '    -m                 Set SquashFS image mode to persistence'
     echo '    -c                 Disable clean work dir'
-    echo '    -x                 Build images only'
+    echo '    -x                 Build chroot only'
+    echo '    -s                 Squash chroot only'
+    echo '    -b                 Generate iso boot only'
     echo '    -z                 Generate iso only'
     echo '                       Requires pre built images (-x)'
+    echo '    -d                 Use dracut instead of mkinitcpio for iso initramfs'
     echo '    -q                 Query settings and pretend build'
     echo '    -h                 This help'
     echo ''
@@ -150,7 +210,7 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='p:r:t:i:g:czxmqh'
+opts='p:r:t:i:g:czsbxmdqh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
@@ -160,9 +220,12 @@ while getopts "${opts}" arg; do
         i) INITSYS="$OPTARG" ;;
         g) GPG_KEY="$OPTARG" ;;
         c) clean_first=false ;;
-        x) images_only=true ;;
+        x) chroot_only=true ;;
         z) iso_only=true ;;
+        s) squash_only=true ;;
+        b) boot_only=true ;;
         m) persist=true ;;
+        d) use_dracut=true ;;
         q) pretend=true ;;
         h|?) usage 0 ;;
         *) echo "invalid argument '${arg}'"; usage 1 ;;

bin/iso/deployiso.in

@@ -12,7 +12,9 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
+. @libdir@/artools/util-iso.sh
+
+prepare_artools
 
 connect(){
     echo "${ACCOUNT}@${FILE_HOST}:${FILE_HOME}"
@@ -30,10 +32,6 @@ sync_dir(){
     show_elapsed_time "${FUNCNAME}" "${timer_start}"
 }
 
-load_user_info
-
-load_config "${USERCONFDIR}/artools/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-
 update=false
 verbose=false
 

bin/pkg/batchpkg.in

@@ -0,0 +1,73 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-19 artoo@artixlinux.org
+# Copyright (C) 2018 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+. /usr/lib/artools/util-pkg.sh
+
+prepare_artools
+
+batch_move() {
+    local name="${1:-pkg_moves}"
+    local pkglist=${TREE_DIR_ARTIX}/$name.list
+    [[ -f $pkglist ]] || die "%s does not exist!" "$pkglist"
+    while read entry;do
+        local pkg=${entry##*:}
+        local src=${entry%:*}
+        src=${src#*:}
+        local dest=${entry%%:*}
+        if ${runlist}; then
+            "${dest}"pkg -s "${src}" -u -p "${pkg}"
+        else
+            msg "%s" "${dest}pkg -s ${src} -u -p ${pkg}"
+        fi
+    done < $pkglist
+}
+
+# batch_upgrade() {
+#     local pkglist=${TREE_DIR_ARTIX}/pkg_upgrades.list
+#     [[ -f $pkglist ]] || die "%s does not exist!" "$pkglist"
+#     while read entry;do
+#         local pkg=${entry#*:}
+#         local dest=${entry%:*}
+#         echo "buildtree -i -p ${pkg}"
+#         echo "${dest}pkg -u -p ${pkg}"
+#     done < $pkglist
+# }
+
+usage() {
+    echo "Usage: ${0##*/} [optional listname]"
+    echo '    -r                 Run generated commands'
+    echo '    -h                 This help'
+    echo ''
+    echo ''
+    exit $1
+}
+
+movelistname=pkg_moves
+runlist=false
+
+opts='rh'
+
+while getopts "${opts}" arg; do
+    case "${arg}" in
+        r) runlist=true ;;
+        h|?) usage 0 ;;
+        *) echo "invalid argument '${arg}'"; usage 1 ;;
+    esac
+done
+
+shift $(($OPTIND - 1))
+
+movelistname="$1"; shift
+
+batch_move "$movelistname"

bin/pkg/buildpkg.in

@@ -12,15 +12,14 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
 . @libdir@/artools/util-pkg.sh
 
-load_user_info
-
-load_config "${USERCONFDIR}/artools/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
+prepare_artools
 
 create_first=false
 rebuild=false
+no_check=false
+is_checkpkg=false
 
 mkchrootpkg_args=(-c -n)
 
@@ -31,8 +30,11 @@ base_devel=('base-devel')
 usage() {
     echo "Usage: ${0##*/} [options] -- [mkchrootpkg_args]"
     echo "    -r <dir>           Create chroots in this directory"
+    echo "    -d <dir>           Destination repo chroot"
     echo '    -c                 Recreate the chroot before building'
     echo '    -m                 Major rebuild'
+    echo '    -N                 Disable check() function'
+    echo '    -C                 Run checkpkg after built'
     echo '    -h                 This help'
     echo ''
     echo "Default mkchrootpkg_args args: ${mkchrootpkg_args[*]}"
@@ -42,13 +44,16 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='hcmr:'
+opts='hcCNmr:d:'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
         r) CHROOTS_PKG="$OPTARG" ;;
+        d) repo="$OPTARG" ;;
         c) create_first=true ;;
         m) rebuild=true ;;
+        C) is_checkpkg=true; mkchrootpkg_args+=(-C) ;;
+        N) no_check=true; mkchrootpkg_args+=(-N) ;;
         h|?) usage 0 ;;
         *) echo "invalid argument '%s'" "${arg}"; usage 1 ;;
     esac
@@ -65,10 +70,10 @@ else
 fi
 
 pacman_conf="${DATADIR}/pacman-${repo}.conf"
-[[ -f ${USERCONFDIR}/artools/pacman-${repo}.conf ]] && pacman_conf="${USERCONFDIR}/artools/pacman-${repo}.conf"
+[[ -f ${USER_CONF_DIR}/pacman-${repo}.conf ]] && pacman_conf="${USER_CONF_DIR}/pacman-${repo}.conf"
 
 makepkg_conf="${DATADIR}/makepkg.conf"
-[[ -f ${USERCONFDIR}/artools/makepkg.conf ]] && makepkg_conf="${USERCONFDIR}/artools/makepkg.conf"
+[[ -f ${USER_CONF_DIR}/makepkg.conf ]] && makepkg_conf="${USER_CONF_DIR}/makepkg.conf"
 
 check_root SOURCE_DATE_EPOCH
 
@@ -89,7 +94,7 @@ if ${create_first} || [[ ! -d "${CHROOTS_PKG}/${repo}-${ARCH}" ]];then
     lock_close 9
 
     rm -rf --one-file-system "${CHROOTS_PKG}/${repo}-${ARCH}"
-    mkdir -p "${CHROOTS_PKG}/${repo}-${ARCH}"
+    (umask 0022; mkdir -p "${CHROOTS_PKG}/${repo}-${ARCH}")
     setarch "${ARCH}" mkchroot \
         -C "${pacman_conf}" \
         -M "${makepkg_conf}" \

bin/pkg/buildtree.in

@@ -12,9 +12,47 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
 . @libdir@/artools/util-pkg.sh
 
+prepare_artools
+
+patch_pkg(){
+    local pkgpath="$1"
+    local pkg=${pkgpath%/*}
+    pkg=${pkg##*/}
+    case $pkg in
+        glibc)
+            msg2 "Patching %s" "$pkg"
+            sed -e 's|{locale,systemd/system,tmpfiles.d}|{locale,tmpfiles.d}|' \
+                -e '/nscd.service/d' \
+                -i $pkgpath/PKGBUILD
+        ;;
+        linux|linux-lts)
+            msg2 "Patching %s" "$pkg"
+            sed -e 's|KBUILD_BUILD_HOST=.*|KBUILD_BUILD_HOST=artixlinux|' -i $pkgpath/PKGBUILD
+            sed -e 's|CONFIG_DEFAULT_HOSTNAME=.*|CONFIG_DEFAULT_HOSTNAME="artixlinux"|' \
+                -i $pkgpath/config
+        ;;
+        bash)
+            msg2 "Patching %s" "$pkg"
+            sed -e 's|system.bash_logout)|system.bash_logout artix.bashrc)|' \
+            -e "s|etc/bash.|etc/bash/|g" \
+            -e 's|"$pkgdir/etc/skel/.bash_logout"|"$pkgdir/etc/skel/.bash_logout"\n  install -Dm644 artix.bashrc $pkgdir/etc/bash/bashrc.d/artix.bashrc|' \
+            -i $pkgpath/PKGBUILD
+            cd $pkgpath
+                patch -Np 1 -i ${DATADIR}/patches/artix-bash.patch
+                updpkgsums
+            cd ../..
+        ;;
+        gstreamer|gst-plugins-*|licenses)
+            msg2 "Patching %s" "$pkg"
+            sed -e 's|https://www.archlinux.org/|https://www.artixlinux.org/|' \
+                -e 's|(Arch Linux)|(Artix Linux)|' \
+                -i $pkgpath/PKGBUILD
+        ;;
+    esac
+}
+
 pull_tree_arch(){
     cd ${TREE_DIR_ARCH}
     for tree in ${TREE_NAMES_ARCH[@]};do
@@ -47,20 +85,19 @@ pull_tree_artix(){
 sync_pkg(){
     local rsync_args=(-aWxvci --progress --delete-before --no-R --no-implied-dirs)
     local src="$1" dest="$2"
-
+    msg "Sync from Arch [%s] to Artix [%s]" "${src##*archlinux/}" "${dest##*artixlinux/}"
     rsync "${rsync_args[@]}" $src/ $dest/
 }
 
 show_deps(){
-    local src="$1" repo="$2"
+    local src="$1"
 
     . $src/PKGBUILD 2>/dev/null
 
     [[ $arch == 'any' ]] && CARCH=any
 
-    local archver=$(get_full_version $pkg)
+    local archver=$(get_full_version)
 
-    msg2 "repo: %s" "$repo"
     [[ -n ${pkgbase} ]] && msg2 "pkgbase: %s" "${pkgbase}"
     msg2 "pkgname: %s" "${pkgname[*]}"
     [[ -n $pkgdesc ]] && msg2 "pkgdesc: %s" "${pkgdesc}"
@@ -73,53 +110,66 @@ show_deps(){
     [[ -n ${optdepends[@]} ]] && msg2 "optdepends: %s" "${optdepends[@]}"
 }
 
+subrepo_new(){
+    cd ${TREE_DIR_ARTIX}/${GROUP}
+
+    local org=$(get_pkg_org "${PACKAGE}")
+
+    create_repo "${PACKAGE}" "$org"
+
+    add_repo_to_team "${PACKAGE}" "$org" "${TEAM}"
+
+    subrepo_clone "${PACKAGE}" "$org"
+
+    prepare_dir "${TREE_DIR_ARTIX}/${GROUP}/${PACKAGE}/trunk"
+
+    commit_jenkins_files "${PACKAGE}"
+}
+
 from_arch(){
-    local pkg="$1" src= dest=
-    local git_tree_arch=$(find_tree "${TREE_DIR_ARCH}" "$pkg")
-    [[ -z $git_tree_arch ]] && die "Package '%s' does not exist!" "$pkg"
+    cd ${TREE_DIR_ARTIX}
 
-    local package=${TREE_DIR_ARCH}/$git_tree_arch/$pkg
-    local repo=$(find_repo "$package" "${staging}" "${unstable}")
+    local srcpath=$(find_pkg "${TREE_DIR_ARCH}" "${PACKAGE}")
+    [[ -z $srcpath ]] && die "Package '%s' does not exist!" "${PACKAGE}"
 
-    src=$package/repos/$repo
+    local repo=$(find_repo "$srcpath")
+    msg "repo: %s" "$repo"
 
-    local git_tree_artix=$(find_tree "${TREE_DIR_ARTIX}" "$pkg")
-    local tree_dir=$(get_artix_tree "$pkg" "$git_tree_artix" "$git_tree_arch")
+    local archpath=$srcpath/repos/$repo
+    local artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${PACKAGE}")
 
-    dest=${TREE_DIR_ARTIX}/$tree_dir/$pkg/trunk
+    show_deps "$archpath"
 
-    msg "tree: %s" "$tree_dir"
-    show_deps "$src" "$repo"
+    if [[ -f "$artixpath"/.gitrepo ]]; then
+        artixpath="$artixpath"/trunk
 
-    if [[ -d $dest ]];then
-
-        cd ${TREE_DIR_ARTIX}/$git_tree_artix
-
-        . $dest/PKGBUILD 2>/dev/null
-        local artixver=$(get_full_version $pkg)
-
-        msg2 "Artix Version: %s" "$artixver"
+        if [[ -d "$artixpath" ]];then
+            sync_pkg "$archpath" "$artixpath"
+            patch_pkg "$artixpath"
+        fi
     else
-        subrepo_new "$pkg" "$tree_dir" "$git_tree_arch"
+        die "Package '%s' does not exist!" "${PACKAGE}"
     fi
-
-    msg "Sync (%s) from [%s] to [%s]" "$pkg" "$git_tree_arch" "$tree_dir"
-
-    sync_pkg "$src" "$dest"
-    patch_pkg "$pkg"
 }
 
 view_build(){
-    local pkg="$1" src=
-    local git_tree_arch=$(find_tree "${TREE_DIR_ARCH}" "$pkg")
-    [[ -z $git_tree_arch ]] && die "Package '%s' does not exist!" "$pkg"
+    local archpath=$(find_pkg "${TREE_DIR_ARCH}" "${PACKAGE}")
+    [[ -z $archpath ]] && die "Package '%s' does not exist!" "${PACKAGE}"
+    local repo=$(find_repo "${archpath}")
+    archpath=$archpath/repos/$repo
+    msg2 "repo: %s" "$repo"
+    show_deps "$archpath"
+}
 
-    local pkg_path=${TREE_DIR_ARCH}/$git_tree_arch/$pkg
-    local repo=$(find_repo "$pkg_path" "${staging}" "${unstable}")
+check_tree(){
+    local archpath=$(find_pkg "${TREE_DIR_ARCH}" "${PACKAGE}")
+    [[ -z $archpath ]] && die "Package '%s' does not exist!" "${PACKAGE}"
+    local artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${PACKAGE}")
+    local group=${artixpath%/*}
+    msg "group: %s" "${group##*/}"
 
-    src=$pkg_path/repos/$repo
-
-    show_deps "$src" "$repo"
+    [[ -z $artixpath ]] && msg2 "exists: %s" "no"
+    [[ -n $artixpath ]] && msg2 "exists: %s" "yes"
 }
 
 sync_repos(){
@@ -133,11 +183,11 @@ sync_repos(){
     fi
 }
 
-load_user_info
+load_makepkg_config
 
-load_config "${USERCONFDIR}/artools/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-load_vars "${USERCONFDIR}/pacman/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
+testing=true
+staging=true
+unstable=false
 
 sync=false
 sync_arch=true
@@ -145,31 +195,32 @@ sync_artix=true
 import=false
 view=false
 createnew=false
-conf=false
-unstable=false
-staging=true
 sync_group=false
+check=false
 
 PACKAGE=''
 
-TEAM=${TREE_NAMES_ARTIX[0]}
+TEAM='community'
 GROUP=${TREE_NAMES_ARTIX[0]}
 
 usage() {
     echo "Usage: ${0##*/} [options]"
     echo '    -p <pkg>      Package name'
     echo '    -t <team>     Team name (only with -n)'
+    echo '                  Possible values: core,extra,community,multilib'
     echo "                  [default: ${TEAM}]"
     echo '    -g <group>    Group name, the superrepo (only with -n or -s)'
     echo "                  [default: ${GROUP}]"
     echo "    -s            Clone or pull repos"
-    echo "    -z            Don't clone or pull arch repos"
-    echo "    -y            Don't clone or pull artix repos"
+    echo "    -a            Don't clone or pull arch repos"
+    echo "    -b            Don't clone or pull artix repos"
     echo '    -i            Import a package from arch repos'
-    echo '    -n            Make new remote subrepo and clone it'
-    echo '    -u            Include kde & gnome unstable (only with -i)'
-    echo '    -w            Exclude staging (only with -i)'
-    echo '    -v            View package depends'
+    echo '    -n            New remote subrepo and clone it'
+    echo '    -v            Check if a package is in the artix tree(s)'
+    echo '    -c            View package depends'
+    echo '    -x            Exclude testing (only with -i)'
+    echo '    -y            Exclude staging (only with -i)'
+    echo '    -z            Include kde & gnome unstable (only with -i)'
     echo '    -h            This help'
     echo ''
     echo ''
@@ -178,7 +229,7 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='p:t:g:uwsinzyvh'
+opts='p:t:g:sinabcvxyzh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
@@ -186,13 +237,15 @@ while getopts "${opts}" arg; do
         t) TEAM="$OPTARG" ;;
         g) GROUP="$OPTARG"; sync_group=true ;;
         s) sync=true ;;
-        z) sync_arch=false ;;
-        y) sync_artix=false ;;
+        a) sync_arch=false ;;
+        b) sync_artix=false ;;
         i) import=true ;;
         n) createnew=true ;;
-        w) staging=false ;;
-        u) unstable=true ;;
+        c) check=true ;;
         v) view=true ;;
+        x) testing=false ;;
+        y) staging=false ;;
+        z) unstable=true ;;
         h|?) usage 0 ;;
         *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
@@ -203,10 +256,14 @@ shift $(($OPTIND - 1))
 prepare_dir "${TREE_DIR_ARTIX}"
 prepare_dir "${TREE_DIR_ARCH}"
 
+set_arch_repos "$testing" "$staging" "$unstable"
+
 ${sync} && sync_repos
 
-${view} && view_build "${PACKAGE}"
+${view} && view_build
 
-${import} && from_arch "${PACKAGE}"
+${check} && check_tree
 
-${createnew} && subrepo_new "${PACKAGE}" "${GROUP}" "${TEAM}"
+${import} && from_arch
+
+${createnew} && subrepo_new

bin/pkg/checkpkg.in

@@ -12,32 +12,133 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
 . @libdir@/artools/util-pkg.sh
 
 shopt -s extglob
 
-if [[ -r '/etc/makepkg.conf' ]]; then
-	source '/etc/makepkg.conf'
-else
-	die '/etc/makepkg.conf not found!'
+load_makepkg_config
+
+pkgver_equal() {
+    if [[ $1 = *-* && $2 = *-* ]]; then
+        # if both versions have a pkgrel, then they must be an exact match
+        [[ $1 = "$2" ]]
+    else
+        # otherwise, trim any pkgrel and compare the bare version.
+        [[ ${1%%-*} = "${2%%-*}" ]]
+    fi
+}
+
+find_cached_package() {
+    local searchdirs=("$PKGDEST" "$PWD") results=()
+    local targetname=$1 targetver=$2 targetarch=$3
+    local dir pkg pkgbasename name ver rel arch r results
+
+    for dir in "${searchdirs[@]}"; do
+        [[ -d $dir ]] || continue
+
+        for pkg in "$dir"/*.pkg.tar?(.!(sig|*.*)); do
+            [[ -f $pkg ]] || continue
+
+            # avoid adding duplicates of the same inode
+            for r in "${results[@]}"; do
+                [[ $r -ef $pkg ]] && continue 2
+            done
+
+            # split apart package filename into parts
+            pkgbasename=${pkg##*/}
+            pkgbasename=${pkgbasename%.pkg.tar*}
+
+            arch=${pkgbasename##*-}
+            pkgbasename=${pkgbasename%-"$arch"}
+
+            rel=${pkgbasename##*-}
+            pkgbasename=${pkgbasename%-"$rel"}
+
+            ver=${pkgbasename##*-}
+            name=${pkgbasename%-"$ver"}
+
+            if [[ $targetname = "$name" && $targetarch = "$arch" ]] &&
+                pkgver_equal "$targetver" "$ver-$rel"; then
+                results+=("$pkg")
+            fi
+        done
+    done
+
+    case ${#results[*]} in
+        0)
+            return 1
+        ;;
+        1)
+            printf '%s\n' "${results[0]}"
+            return 0
+        ;;
+        *)
+            error 'Multiple packages found:'
+            printf '\t%s\n' "${results[@]}" >&2
+            return 1
+        ;;
+    esac
+}
+
+usage() {
+    cat <<- _EOF_
+        Usage: ${BASH_SOURCE[0]##*/} [OPTIONS]
+
+        Searches for a locally built package corresponding to the PKGBUILD, and
+        downloads the last version of that package from the Pacman repositories.
+        It then compares the list of .so files provided by each version of the
+        package and outputs if there are soname differences for the new package.
+        A directory is also created using mktemp with files containing a file
+        list for both packages and a library list for both packages.
+
+        OPTIONS
+            -r, --rmdir     Remove the temporary directory
+            -w, --warn      Print a warning in case of differences
+            -h, --help      Show this help text
+_EOF_
+}
+
+RMDIR=0
+WARN=0
+
+OPT_SHORT='rwh'
+OPT_LONG=('rmdir' 'warn' 'help')
+if ! parseopts "$OPT_SHORT" "${OPT_LONG[@]}" -- "$@"; then
+    exit 1
 fi
+set  -- "${OPTRET[@]}"
 
-load_user_info
-
-load_vars "${USERCONFDIR}/pacman/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
+while :; do
+    case $1 in
+        -r|--rmdir)
+            RMDIR=1
+            ;;
+        -w|--warn)
+            WARN=1
+            ;;
+        -h|--help)
+            usage
+            exit 0
+            ;;
+        --)
+            shift; break
+            ;;
+    esac
+    shift
+done
 
 if [[ ! -f PKGBUILD ]]; then
     die 'This must be run in the directory of a built package.'
 fi
 
+# shellcheck source=PKGBUILD.proto
 . ./PKGBUILD
-if [[ $arch == 'any' ]]; then
+if [[ ${arch[0]} == 'any' ]]; then
     CARCH='any'
 fi
 
 STARTDIR=$(pwd)
+(( RMDIR )) && trap 'rm -rf $TEMPDIR' EXIT INT TERM QUIT
 TEMPDIR=$(mktemp -d --tmpdir checkpkg-script.XXXX)
 
 for _pkgname in "${pkgname[@]}"; do
@@ -90,9 +191,12 @@ for _pkgname in "${pkgname[@]}"; do
     find-libprovides "$TEMPDIR/$oldpkg" 2>/dev/null | sort > "$TEMPDIR/libraries-$_pkgname-old"
     find-libprovides "$pkgfile" 2>/dev/null | sort > "$TEMPDIR/libraries-$_pkgname"
     if ! diff_output="$(sdiff -s "$TEMPDIR/libraries-$_pkgname-old" "$TEMPDIR/libraries-$_pkgname")"; then
-        msg "Sonames differ in %s!" "$_pkgname"
+        message="Sonames differ in $_pkgname!"
+        (( WARN )) && warning "$message" || msg "$message"
         echo "$diff_output"
     else
-        msg "No soname differences for %s" "$_pkgname."
+        msg "No soname differences for %s." "$_pkgname"
     fi
 done
+
+(( RMDIR )) || msg "Files saved to %s" "$TEMPDIR"

bin/pkg/commitpkg.in

@@ -12,9 +12,10 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
 . @libdir@/artools/util-pkg.sh
 
+prepare_artools
+
 get_path(){
     local repo="$1" pkg=trunk/PKGBUILD
     if [[ $repo != trunk ]]; then
@@ -25,21 +26,40 @@ get_path(){
 }
 
 prepare_commit(){
-    local dest="$1"
+    local dest="$1" to_rm="${2:-none}"
+    if [[ -d repos/$to_rm ]]; then
+        git rm -r repos/$to_rm
+        git commit -m "change of package arch"
+    fi
     [[ -d repos/$dest ]] && git rm -r repos/$dest
     [[ ! -d repos ]] && mkdir repos
     [[ ! -d repos/$dest ]] && mkdir repos/$dest
 }
 
-commit_pkg(){
-    local git_tree=$(find_tree "${TREE_DIR_ARTIX}" "${PACKAGE}")
-    if [[ -n ${git_tree} ]];then
+check_team(){
+    if [[ ${REPO_SRC} == "core" && ${REPO_DEST} == "extra" ]] || \
+        [[ ${REPO_SRC} == "extra" && ${REPO_DEST} == "core" ]] || \
+        [[ ${REPO_SRC} == "extra" && ${REPO_DEST} == "community" ]] || \
+        [[ ${REPO_SRC} == "community" && ${REPO_DEST} == "extra" ]] ;then
 
-        cd ${TREE_DIR_ARTIX}/${git_tree}
+        local org=$(get_pkg_org "${PACKAGE}")
+        add_repo_to_team "${PACKAGE}" "$org" "${REPO_DEST}"
+        remove_repo_from_team "${PACKAGE}" "$org" "${REPO_SRC}"
+    fi
+}
+
+commit_pkg(){
+    local artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${PACKAGE}")
+
+    if [[ -n ${artixpath} ]];then
+
+        local group=${artixpath%/*}
+
+        cd ${group}
 
         local head=$(get_local_head)
 
-        cd ${TREE_DIR_ARTIX}/${git_tree}/${PACKAGE}
+        cd ${artixpath}
 
         local pkgbuild=$(get_path "${REPO_SRC}")
 
@@ -66,19 +86,18 @@ commit_pkg(){
             commit_msg="[${REPO_SRC}] '${PACKAGE}-$version' ${action}"
             msg "Action: %s" "$commit_msg"
             git add .
-
         fi
         git commit -m "$commit_msg"
 
-        cd ${TREE_DIR_ARTIX}/${git_tree}
+        cd ${group}
 
-        ${push} && pull_tree "${git_tree}" "$head"
+        ${push} && pull_tree "${group##*/}" "$head"
 
-        subrepo_pull "${PACKAGE}"
+#         subrepo_pull "${PACKAGE}"
         subrepo_push "${PACKAGE}"
         subrepo_clean "${PACKAGE}"
 
-        ${push} && push_tree "${git_tree}"
+        ${push} && push_tree "${group##*/}"
 
         git prune
     else
@@ -86,15 +105,26 @@ commit_pkg(){
     fi
 }
 
-symlink_commit_pkg(){
-    local git_tree=$(find_tree "${TREE_DIR_ARTIX}" "${PACKAGE}")
-    if [[ -n ${git_tree} ]];then
+get_rm_arch(){
+    local rm_arch='none'
+    case "$CARCH" in
+        'any') rm_arch="${REPO_DEST}-x86_64" ;;
+        'x86_64') rm_arch="${REPO_DEST}-any" ;;
+    esac
+    echo $rm_arch
+}
 
-        cd ${TREE_DIR_ARTIX}/${git_tree}
+repo_commit_pkg(){
+    local artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${PACKAGE}")
+    if [[ -n ${artixpath} ]];then
+
+        local group=${artixpath%/*}
+
+        cd ${group}
 
         local head=$(get_local_head)
 
-        cd ${TREE_DIR_ARTIX}/${git_tree}/${PACKAGE}
+        cd ${artixpath}
 
         local pkgbuild=$(get_path "${REPO_SRC}")
 
@@ -107,7 +137,7 @@ symlink_commit_pkg(){
             local action='add'
             local dest="${REPO_DEST}-$CARCH"
 
-            prepare_commit "$dest"
+            prepare_commit "$dest" "$(get_rm_arch)"
 
             cp trunk/* repos/$dest/
         else
@@ -115,7 +145,7 @@ symlink_commit_pkg(){
             local src="${REPO_SRC}-$CARCH" dest="${REPO_DEST}-$CARCH"
 
             [[ ! -f repos/$src/PKGBUILD ]] && die "%s does not exist!" "repos/$src/PKGBUILD"
-            prepare_commit "$dest"
+            prepare_commit "$dest" "$(get_rm_arch)"
 
             cp repos/$src/* repos/$dest/
             git rm -r repos/$src
@@ -126,27 +156,37 @@ symlink_commit_pkg(){
         git add .
         git commit -m "$commit_msg"
 
-        cd ${TREE_DIR_ARTIX}/${git_tree}
+        cd ${group}
 
-        ${push} && pull_tree "${git_tree}" "$head"
+        ${push} && pull_tree "${group##*/}" "$head"
 
-        subrepo_pull "${PACKAGE}"
+#         subrepo_pull "${PACKAGE}"
         subrepo_push "${PACKAGE}"
         subrepo_clean "${PACKAGE}"
 
-        ${push} && push_tree "${git_tree}"
+        ${push} && push_tree "${group##*/}"
 
         git prune
+
+        check_team
     else
         error "Package '%s' does not exist!" "${PACKAGE}"
     fi
 }
 
-load_user_info
+is_valid_repo(){
+    local src="$1" cases=
+    set_arch_repos true true true
+    for r in ${ARCH_REPOS[@]};do
+        cases=${cases:-}${cases:+|}${r}
+    done
+    eval "case $src in
+        ${cases}|trunk) return 0 ;;
+        *) return 1 ;;
+    esac"
+}
 
-load_config "${USERCONFDIR}/artools/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-load_vars "${USERCONFDIR}/pacman/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
+load_makepkg_config
 
 REPO_SRC='trunk'
 PACKAGE=''
@@ -189,7 +229,7 @@ if $(is_valid_repo "${REPO_SRC}");then
     if [[ "${cmd}" == 'commitpkg' ]];then
         commit_pkg
     else
-        symlink_commit_pkg
+        repo_commit_pkg
     fi
 else
     error "source repository '%s' is not valid!" "${REPO_SRC}"

bin/pkg/comparepkg.in

@@ -12,88 +12,179 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
 . @libdir@/artools/util-pkg.sh
 
-compare(){
-    local pkgpath="$1" group="$2"
-    local pkg=${pkgpath##*/}
-    local artixrepo=$(find_repo "$package" "${staging}" "${unstable}")
-    local artixshow=${artixrepo%-*}
-    local pkgbuild=$pkgpath/repos/$artixrepo/PKGBUILD
+prepare_artools
 
-    if [[ -f $pkgbuild ]];then
+get_import_path(){
+    local pkg="$1" import_path=
 
-        . $pkgbuild 2>/dev/null
-        local artixver=$(get_full_version $pkg)
+    for tree in ${TREE_NAMES_ARCH[@]};do
+        [[ -d ${TREE_DIR_ARCH}/$tree/$pkg/repos ]] && import_path=${TREE_DIR_ARCH}/$tree/$pkg
+    done
+    echo $import_path
+}
 
-        local archpath=$(get_import_path $pkg)
+compare_m(){
+    local artixver="$1" artixrepo="$2" archver="$3" archrepo="$4"
 
-        local archrepo=$(find_repo "$archpath" "${staging}" "${unstable}")
-
-        local archshow=${archrepo%-*}
-        pkgbuild=$archpath/repos/$archrepo/PKGBUILD
-
-        if [[ -f $pkgbuild ]];then
-            . $pkgbuild 2>/dev/null
-            local archver=$(get_full_version $pkg)
+    local result=$(vercmp "$artixver" "$archver")
+    if [[ $artixrepo == *testing* ]] || [[ $artixrepo == *staging* ]]; then
+        if [[ "$archrepo" == "$artixrepo"  ]]; then
+            msg_row "${table}" "${archrepo%-*}" "${artixrepo%-*}" "$pkg" "$archver" "$artixver" "${group#*-}"
+        else
+            msg_row_notify "${table}" "${archrepo%-*}" "${artixrepo%-*}" "$pkg" "$archver" "$artixver" "${group#*-}"
+            if [[ -n "$archrepo" ]]; then
+                printf "%s\n" "${archrepo%-*}:${artixrepo%-*}:$pkg" >> ${TREE_DIR_ARTIX}/pkg_moves.list
+            fi
         fi
 
-        local result=$(vercmp "$artixver" "$archver")
-
-        local repomatch=false
-        [[ "$archrepo" == "$artixrepo" ]] && repomatch=true
-
-        if ${move};then
-
-            if [ $result -gt -1 ];then
-                case $artixrepo in
-                    *testing*|*staging*)
-                        if $repomatch;then
-                            msg_row "${table}" "$archshow" "$artixshow" "$pkg" "$archver" "$artixver" "${group#*-}"
-                        else
-                            msg_row_notify "${table}" "$archshow" "$artixshow" "$pkg" "$archver" "$artixver" "${group#*-}"
-                        fi
-                    ;;
-                esac
-            fi
-
-        elif ${upgrades};then
-
-            if [ $result -eq -1 ];then
-                msg_row_upgrade "${table}" "$archshow" "$artixshow" "$pkg" "$archver" "$artixver" "${group#*-}"
-            fi
-
-        elif ${downgrades};then
-
-            if [ $result -eq 1 ];then
-                if [[ -n $archver ]] && [[ -n $archrepo ]];then
-                    msg_row_downgrade "${table}" "$archshow" "$artixshow" "$pkg" "$archver" "$artixver" "${group#*-}"
-                fi
-            fi
-
-        fi
-        unset pkgver epoch pkgrel artixver archver pkgbuild archpath
-
     fi
 }
 
+compare_u(){
+    local artixver="$1" artixrepo="$2" archver="$3" archrepo="$4"
+
+    local result=$(vercmp "$artixver" "$archver")
+    if [ $result -eq -1 ];then
+        msg_row_upgrade "${table}" "${archrepo%-*}" "${artixrepo%-*}" "$pkg" "$archver" "$artixver" "${group#*-}"
+        printf "%s\n" "${archrepo%-*}:$pkg" >> ${TREE_DIR_ARTIX}/pkg_upgrades.list
+    fi
+}
+
+compare_d(){
+    local artixver="$1" artixrepo="$2" archver="$3" archrepo="$4"
+
+    local result=$(vercmp "$artixver" "$archver")
+    if [ $result -eq 1 ];then
+        if [[ -n "$archver" ]] && [[ -n "$archrepo" ]];then
+            msg_row_downgrade "${table}" "${archrepo%-*}" "${artixrepo%-*}" "$pkg" "$archver" "$artixver" "${group#*-}"
+        fi
+    fi
+}
+
+pre_compare(){
+    local func="$1" pkgpath="$2"
+    local group="${pkgpath%/*}"
+    group=${group##*/}
+    local pkg=${pkgpath##*/}
+    local artixrepo=$(find_repo "$pkgpath")
+    local pkgbuild=$pkgpath/repos/$artixrepo/PKGBUILD
+
+    if [[ -f $pkgbuild ]];then
+        . $pkgbuild 2>/dev/null
+        local artixver=$(get_full_version)
+
+        local archpath=$(get_import_path $pkg)
+        local archrepo=$(find_repo "${archpath}")
+        pkgbuild=$archpath/repos/$archrepo/PKGBUILD
+
+        if [[ -f "$pkgbuild" ]];then
+            . $pkgbuild 2>/dev/null
+            local archver=$(get_full_version)
+        fi
+
+        "$func" "$artixver" "$artixrepo" "$archver" "$archrepo"
+
+        unset pkgver epoch pkgrel artixver archver pkgbuild archpath
+    fi
+}
+
+compare_upgrades(){
+    local pkgpath="${1%/*}"
+    pre_compare compare_u "$pkgpath"
+}
+
+compare_downgrades(){
+    local pkgpath="${1%/*}"
+    pre_compare compare_d "$pkgpath"
+}
+
+compare_move(){
+    local pkgpath="${1%/*}"
+    pre_compare compare_m "$pkgpath"
+}
+
+tree_loop(){
+    local func="$1"
+    for tree in ${TREE_NAMES_ARTIX[@]};do
+        local pkgs=$(find ${TREE_DIR_ARTIX}/$tree -name trunk)
+        for package in ${pkgs[@]}; do
+            "$func" "$package"
+        done
+    done
+}
+
+show_compare_header(){
+    msg_table_header "${table}" "Arch Repo" "Artix Repo" "Package" "Arch version" "Artix version" "Group"
+}
+
+show_upgrades_table(){
+    show_compare_header
+    [[ -f ${TREE_DIR_ARTIX}/pkg_upgrades.list ]] && rm ${TREE_DIR_ARTIX}/pkg_upgrades.list
+    tree_loop compare_upgrades
+}
+
+show_downgrades_table(){
+    show_compare_header
+    tree_loop compare_downgrades
+}
+
+show_move_table(){
+    show_compare_header
+    [[ -f ${TREE_DIR_ARTIX}/pkg_moves.list ]] && rm ${TREE_DIR_ARTIX}/pkg_moves.list
+    tree_loop compare_move
+}
+
+update_db_cache(){
+    msg "Updating database cache"
+    for repo in "${searchrepos[@]}"; do
+        local cachedir=${db_cache_dir}/${LINKSDBEXT}/${ARCH}/${repo}
+        rm -rf "$cachedir"
+        mkdir -p "$cachedir"
+        msg2 "%s" "$repo"
+        curl -L -s "${REPOS_MIRROR}/${repo}/os/${ARCH}/${repo}.${LINKSDBEXT}" \
+            | bsdtar -xf - -C "$cachedir"
+    done
+    msg "Done"
+}
+
+query_db() {
+    for repo in "${searchrepos[@]}"; do
+        local prefix=
+        local db=${db_cache_dir}/${LINKSDBEXT}/${ARCH}/${repo}/
+        if [[ -d ${db} ]]; then
+            while read -rd '' pkg; do
+                read -r match
+                pkg=${pkg#${db}}
+                pkg="${pkg%/*}"
+                msg_row "${tableQ}" "${repo}" "${pkg}" "${match}"
+            done < <(grep -rZ "${library}" "${db}") | sort -u
+        fi
+    done
+}
+
+show_lib_table() {
+    ${sync} && update_db_cache
+    msg_table_header "${tableQ}" "Repo" "Package" "Library"
+    query_db
+}
+
 is_db_entry() {
-    local pkgname="$1" repo="$(arch2artix $2)"
-    if [[ -d ${USERCACHEDIR}/${LINKSDBEXT}/${ARCH}/$repo/$pkgname ]];then
+    local pkgname="$1" repo="${REPOS[$2]}"
+
+    if [[ -d ${db_cache_dir}/${LINKSDBEXT}/${ARCH}/$repo/$pkgname ]];then
         return 0
     fi
     return 1
 }
 
 check_db(){
-    local pkgpath="$1"
+    local pkgpath="${1%/*}"
     local pkg=${pkgpath##*/}
     local sarch=(any ${ARCH})
-    local arch_repos=$(arch_repos "${staging}" "${unstable}")
-
-    for repo in ${arch_repos[@]};do
 
+    for repo in ${ARCH_REPOS[@]};do
         for a in ${sarch[@]};do
 
             local pkgbuild=$pkgpath/repos/$repo-$a/PKGBUILD
@@ -101,7 +192,8 @@ check_db(){
             if [[ -f $pkgbuild ]];then
 
                 . $pkgbuild 2>/dev/null
-                local artixver=$(get_full_version $pkg)
+                local artixver=$(get_full_version)
+
                 local is_entry=false
 
                 for name in ${pkgname[@]};do
@@ -109,8 +201,8 @@ check_db(){
                     if is_db_entry "$name-$artixver" "$repo";then
                         is_entry=true
                     fi
-                    if ! $is_entry; then
-                        msg_row "${table2}" "$repo" "$name" "$artixver" "$is_entry"
+                    if ! $is_entry;then
+                        msg_row "${tableU}" "$repo" "$name" "$artixver" "$is_entry"
                     fi
                 done
                 unset artixver is_entry pkgbuild pkgver epoch pkgname pkgbase
@@ -119,100 +211,72 @@ check_db(){
     done
 }
 
-update_db_cache(){
-    msg "Updating database cache"
-    for repo in "${searchrepos[@]}"; do
-        local cachedir=${USERCACHEDIR}/${LINKSDBEXT}/${ARCH}/${repo}
-        rm -rf "$cachedir"
-        mkdir -p "$cachedir"
-        msg2 "%s" "$repo"
-        curl -s "${REPOS_MIRROR}/${repo}/os/${ARCH}/${repo}.${LINKSDBEXT}" \
-            | bsdtar -xf - -C "$cachedir"
-    done
-    msg "Done"
+show_db_table(){
+    ${sync} && update_db_cache
+    msg_table_header "${tableU}" "Repo" "Package" "Version" "Database"
+    tree_loop check_db
 }
 
-query_db() {
-    msg_table_header "${table3}" "Repo" "Package" "Library"
-    for repo in "${searchrepos[@]}"; do
-        local prefix=
-        local db=${USERCACHEDIR}/${LINKSDBEXT}/${ARCH}/${repo}/
-        if [[ -d ${db} ]]; then
-            while read -rd '' pkg; do
-                read -r match
-                pkg=${pkg#${db}}
-                pkg="${pkg%/*}"
+db_cache_dir="${XDG_CACHE_HOME:-$USER_HOME/.cache}/artools"
 
-                msg_row "${table3}" "${repo}" "${pkg}" "${match}"
-            done < <(grep -rZ "${library}" "${db}") | sort -u
-        fi
-    done
-    exit 0
-}
+load_makepkg_config
 
-show_version_table(){
-
-    if ${check};then
-        ${sync} && update_db_cache
-        msg_table_header "${table2}" "Repo" "Package" "Version" "Database"
-    elif ${query};then
-        ${sync} && update_db_cache
-        query_db
-    else
-        msg_table_header "${table}" "Arch Repo" "Artix Repo" "Package" "Arch version" "Artix version" "Group"
-    fi
-
-    for tree in ${TREE_NAMES_ARTIX[@]};do
-
-        local git=$(find ${TREE_DIR_ARTIX}/$tree/ -mindepth 1 -maxdepth 1 -type d)
-
-        for package in ${git[@]}; do
-            if ${check};then
-                check_db "$package"
-            else
-                compare "$package" "$tree"
-            fi
-        done
-    done
-}
-
-load_user_info
-
-load_config "${USERCONFDIR}/artools/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-load_vars "${USERCONFDIR}/pacman/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
-
-unstable=false
+testing=true
 staging=true
+unstable=false
+
 upgrades=false
 downgrades=false
 move=false
-check=false
+
 sync=false
+check=false
 query=false
 
-artix_repos=(
-    'goblins' 'gremlins' 'system' 'world'
-    'galaxy-goblins' 'galaxy-gremlins' 'galaxy'
-    'lib32-goblins' 'lib32-gremlins' 'lib32'
-    'gnome-wobble' 'kde-wobble'
+readonly table="%-18s %-18s %-25s %-27s %-27s %-10s"
+readonly tableU="%-20s %-35s %-30s %-10s"
+readonly tableQ="%-20s %-45s %s"
+
+declare -A REPOS=(
+    [core]=system
+    [extra]=world
+    [community]=galaxy
+    [multilib]=lib32
+    [testing]=gremlins
+    [staging]=goblins
+    [community-testing]=galaxy-gremlins
+    [community-staging]=galaxy-goblins
+    [multilib-testing]=lib32-gremlins
+    [multilib-staging]=lib32-goblins
+    [kde-unstable]=kde-wobble
+    [gnome-unstable]=gnome-wobble
 )
 
-readonly table="%-18s %-18s %-25s %-27s %-27s %-10s"
-readonly table2="%-20s %-35s %-30s %-10s"
-readonly table3="%-20s %-45s %s"
-
-searchrepos=(${artix_repos[@]})
+searchrepos=(
+    ${REPOS[kde-unstable]}
+    ${REPOS[gnome-unstable]}
+    ${REPOS[staging]}
+    ${REPOS[testing]}
+    ${REPOS[core]}
+    ${REPOS[extra]}
+    ${REPOS[community-staging]}
+    ${REPOS[community-testing]}
+    ${REPOS[community]}
+    ${REPOS[multilib-staging]}
+    ${REPOS[multilib-testing]}
+    ${REPOS[multilib]}
+)
 
 usage() {
     echo "Usage: ${0##*/} [options] (with -q [libname])"
     echo '    -u            Show upgrade packages'
     echo '    -d            Show downgrade packages'
     echo '    -m            Show packages to move'
-    echo "    -x            Don't inlcude staging packages"
-    echo '    -y            Include unstable kde and gnome'
-    echo '    -c            Check repos'
+    echo "    -x            Don't inlcude testing packages"
+    echo "    -y            Don't inlcude staging packages"
+    echo '    -z            Include unstable kde and gnome'
     echo "    -s            Sync repo databases"
+    echo '    -c            Check repos'
     echo "    -q            Query repo databases for so libs"
     echo '    -r <repo>     Repo name to query'
     echo '                  [default: all]'
@@ -224,19 +288,20 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='r:qcsudmxyh'
+opts='r:qcsudmxyzh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
         u) upgrades=true ;;
         d) downgrades=true ;;
         m) move=true ;;
-        x) staging=false ;;
-        y) unstable=true ;;
-        c) check=true ;;
         s) sync=true ;;
+        c) check=true ;;
         q) query=true ;;
         r) searchrepos=("$OPTARG") ;;
+        x) testing=false ;;
+        y) staging=false ;;
+        z) unstable=true ;;
         h|?) usage 0 ;;
         *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
@@ -246,4 +311,14 @@ shift $(($OPTIND - 1))
 
 library="$1"; shift
 
-show_version_table
+set_arch_repos "$testing" "$staging" "$unstable"
+
+${move} && show_move_table
+
+${upgrades} && show_upgrades_table
+
+${downgrades} && show_downgrades_table
+
+${check} && show_db_table
+
+${query} && show_lib_table

bin/pkg/deploypkg.in

@@ -12,118 +12,44 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
 . @libdir@/artools/util-pkg.sh
 
-find_cached_pkgfile() {
-    local searchdirs=("$PKGDEST" "$PWD") results=()
-    local pkg="$1"
-    for dir in "${searchdirs[@]}"; do
-        [[ -d $dir ]] || continue
-        results+=$(find "$dir" -type f -name "$pkg")
-    done
-    case ${#results[*]} in
-        0)
-            return 1
-        ;;
-        1)
-            printf '%s\n' "${results[0]}"
-            return 0
-        ;;
-        *)
-            error 'Multiple packages found:'
-            printf '\t%s\n' "${results[@]}" >&2
-            return 1
-        ;;
-    esac
-}
+prepare_artools
 
-update_repo2(){
-    local repo="$1"
-    local repo_path=${REPOS_ROOT}/$repo/os/${ARCH} packages=()
-
-    for name in ${passfiles[@]}; do
-        if pkgfile=$(find_cached_pkgfile "$name");then
-            info "Found: %s" "$name"
-            if ${add_pkg};then
-                local action='add'
-                packages+=("$name")
-#                 checkpkg "${pkgfile}" || return 2
-                if ${sign_pkg};then
-                    [[ -e ${pkgfile}.sig ]] && rm ${pkgfile}.sig
-                    signfile ${pkgfile}
-                fi
-                ln -sf ${pkgfile}{,.sig} $repo_path/
-            elif ${del_pkg};then
-                local action='remove'
-                packages+=("$name")
-                [[ -e $repo_path/$name ]] && rm $repo_path/$name
-                [[ -e $repo_path/$name.sig ]] && rm $repo_path/$name.sig
-            fi
+add(){
+    pkg=${pkgname%.*}
+    for ext in zst xz;do
+        if pkgfile=$(find_cached_pkgfile "$pkg.$ext");then
+            msg "Found: %s" "${pkgfile}"
+            packages+=("$pkg.$ext")
+            action='add'
+            ln -sf "${pkgfile}"{,.sig} "$repo_path"/
         fi
     done
-    cd $repo_path
-    if [[ -n $action ]]; then
-        repo-$action -R $repo.${PKGDBEXT} ${packages[@]}
-        ${linksdb} && links-$action $repo.${LINKSDBEXT} ${packages[@]}
-    fi
-
-    return 0
 }
 
-update_repo(){
-    local repo="$1" pkgfile ver
-    local repo_path=${REPOS_ROOT}/$repo/os/${ARCH} packages=()
+remove(){
+    packages+=("$pkgname")
+    action='remove'
+    rm "$repo_path"/"$pkgname"*pkg.tar*
+}
 
-    . PKGBUILD
-
-    local pkgsearch=(${pkgname[@]})
-    if check_option "debug" "y"; then
-        pkgbase=${pkgbase:-${pkgname[@]}}
-        pkgsearch+=("${pkgbase}-debug")
-    fi
-
-    for name in ${pkgsearch[@]}; do
-        pkgarch=$(get_pkg_arch "$name")
-        ver=$(get_full_version "$name")
-        if pkgfile=$(find_cached_package "$name" "$ver" "$pkgarch");then
-            local pkg=${pkgfile##*/}
-            info "Found: %s" "$pkg"
-            if ${add_pkg};then
-                local action='add'
-                packages+=("$pkg")
-#                 checkpkg "${pkgfile}" || return 2
-                if ${sign_pkg};then
-                    [[ -e ${pkgfile}.sig ]] && rm ${pkgfile}.sig
-                    signfile ${pkgfile}
-                fi
-                ln -sf ${pkgfile}{,.sig} $repo_path/
-            elif ${del_pkg};then
-                local action='remove'
-                packages+=("$name")
-                [[ -e $repo_path/$pkg ]] && rm $repo_path/$pkg
-                [[ -e $repo_path/$pkg.sig ]] && rm $repo_path/$pkg.sig
-            fi
-        fi
+repo_action(){
+    local packages=() action= func="$1"
+    for pkgname in ${passfiles[@]}; do
+        "$func"
     done
     cd $repo_path
-    if [[ -n $action ]]; then
-        repo-$action -R $repo.${PKGDBEXT} ${packages[@]}
-        ${linksdb} && links-$action $repo.${LINKSDBEXT} ${packages[@]}
+    if [[ -n "$action" ]]; then
+        repo-"$action" -R "${dest_repo}"."${PKGDBEXT}" "${packages[@]}"
+        ${linksdb} && links-"$action" "${dest_repo}"."${LINKSDBEXT}" "${packages[@]}"
     fi
-
-    return 0
 }
 
-load_user_info
-
-load_config "${USERCONFDIR}/artools/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-load_vars "${USERCONFDIR}/pacman/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
+load_makepkg_config
 
 add_pkg=false
-del_pkg=false
-sign_pkg=false
+rm_pkg=false
 linksdb=false
 
 cmd=${0##*/}
@@ -131,24 +57,24 @@ dest_repo=${cmd#*-}
 
 usage() {
     echo "Usage: ${cmd} [options]"
+    echo '    -d <dest>          Destination repository'
     echo '    -a                 Add package(s) to repository'
     echo '    -r                 Remove package(s) from repository'
     echo '    -l                 Use links db'
-    echo '    -s                 Sign package(s)'
     echo '    -h                 This help'
     echo ''
     echo ''
     exit $1
 }
 
-opts='arlsh'
+opts='arlhd:'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
-        a) add_pkg=true; del_pkg=false ;;
-        r) del_pkg=true; add_pkg=false ;;
+        d) dest_repo="$OPTARG" ;;
+        a) add_pkg=true; rm_pkg=false ;;
+        r) rm_pkg=true; add_pkg=false ;;
         l) linksdb=true ;;
-        s) sign_pkg=true ;;
         h|?) usage 0 ;;
         *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
@@ -160,8 +86,13 @@ passfiles="$@"
 
 prepare_dir "${REPOS_ROOT}"
 
+repo_path=${REPOS_ROOT}/${dest_repo}/os/${ARCH}
+
 if [[ -n ${passfiles[@]} ]]; then
-    update_repo2 "${dest_repo}"
-else
-    update_repo "${dest_repo}"
+    if ${add_pkg}; then
+        repo_action add
+    fi
+    if ${rm_pkg}; then
+        repo_action remove
+    fi
 fi

bin/pkg/find-libdeps.in

@@ -12,7 +12,6 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
 . @libdir@/artools/util-pkg.sh
 
 set -e

bin/pkg/finddeps.in

@@ -33,17 +33,18 @@ find . -type d -print0 2>/dev/null| while read -r -d '' d; do
         for dep in "${depends[@]}"; do
             # lose the version comparator, if any
             depname=${dep%%[<>=]*}
-            [[ $depname = "$match" ]] && echo "$d (depends)"
+            [[ $depname = "$match" ]] && msg "$d (depends)"
         done
         for dep in "${makedepends[@]}"; do
             # lose the version comparator, if any
             depname=${dep%%[<>=]*}
-            [[ $depname = "$match" ]] && echo "$d (makedepends)"
+            [[ $depname = "$match" ]] && msg "$d (makedepends)"
         done
         for dep in "${optdepends[@]/:*}"; do
             # lose the version comaparator, if any
             depname=${dep%%[<>=]*}
-            [[ $depname = "$match" ]] && echo "$d (optdepends)"
+            [[ $depname = "$match" ]] && msg "$d (optdepends)"
         done
     fi
 done
+

bin/pkg/links-add.in

@@ -33,6 +33,7 @@ REPO_DB_PREFIX=
 REPO_DB_SUFFIX=
 LOCKFILE=
 CLEAN_LOCK=0
+# PREVENT_DOWNGRADE=0
 
 . @libdir@/artools/util-base.sh
 
@@ -52,6 +53,7 @@ Multiple packages to add can be specified on the command line.\n"
         printf -- "\n"
         printf -- "Options:\n"
         printf -- "  -n, --new         only add packages that are not already in the database\n"
+#         printf -- "$(gettext "  -p, --prevent-downgrade  do not add package to database if a newer version is already present\n")"
     elif [[ $cmd == "links-remove" ]] ; then
         printf -- "Usage: links-remove [options] <path-to-db> <packagename> ...\n"
         printf -- "\n"
@@ -199,6 +201,18 @@ db_write_entry() {
         if (( ONLYADDNEW )); then
             return 0
         fi
+#     else
+#         pkgentry=$(find_pkgentry "$pkgname")
+#         if [[ -n $pkgentry ]]; then
+#
+#             local version=$(sed -n '/^%VERSION%$/ {n;p;q}' "$pkgentry/desc")
+#             if (( $(vercmp "$version" "$pkgver") > 0 )); then
+#                 warning "$(gettext "A newer version for '%s' is already present in database")" "$pkgname"
+#                 if (( PREVENT_DOWNGRADE )); then
+#                     return 0
+#                 fi
+#             fi
+#         fi
     fi
 
     # remove an existing entry if it exists, ignore failures
@@ -459,6 +473,7 @@ while (( $# )); do
         -s|--sign) SIGN=1 ;;
         -k|--key) KEY=1 ; shift; GPGKEY=$1 ;;
         -v|--verify) VERIFY=1 ;;
+#         -p|--prevent-downgrade) PREVENT_DOWNGRADE=1 ;;
         *) args+=("$1") ;;
     esac
     shift

bin/pkg/mkchrootpkg.in

@@ -29,10 +29,11 @@ keepbuilddir=0
 update_first=0
 clean_first=0
 run_namcap=0
+run_checkpkg=0
 temp_chroot=0
+run_nocheck=0
 
-bindmounts_ro=()
-bindmounts_rw=()
+bindmounts=()
 
 copy=$USER
 [[ -n ${SUDO_USER:-} ]] && copy=$SUDO_USER
@@ -73,6 +74,8 @@ usage() {
     echo '           Useful for maintaining multiple copies'
     echo "           Default: $copy"
     echo '-n         Run namcap on the package'
+    echo '-C         Run checkpkg on the package'
+    echo '-N         Disable check() function'
     echo '-T         Build in a temporary directory'
     echo '-U         Run makepkg as a specified user'
     exit 1
@@ -80,37 +83,31 @@ usage() {
 
 # {{{ functions
 
-# Usage: sync_chroot $rootdir $copydir [$copy]
+# Usage: sync_chroot $chrootdir $copydir [$copy]
 sync_chroot() {
-    local rootdir=$1
+    local chrootdir=$1
     local copydir=$2
     local copy=${3:-$2}
 
-    if [[ "$rootdir" -ef "$copydir" ]]; then
+    if [[ "$chrootdir/root" -ef "$copydir" ]]; then
         error 'Cannot sync copy with itself: %s' "$copydir"
         return 1
     fi
 
     # Get a read lock on the root chroot to make
     # sure we don't clone a half-updated chroot
-    slock 8 "$rootdir.lock" \
-        "Locking clean chroot [%s]" "$rootdir"
+    slock 8 "$chrootdir/root.lock" \
+        "Locking clean chroot [%s]" "$chrootdir/root"
 
-    stat_busy "Synchronizing chroot copy [%s] -> [%s]" "$rootdir" "$copy"
-    if is_subvolume "$rootdir" && is_same_fs "$rootdir" "$(dirname -- "$copydir")" && ! mountpoint -q "$copydir"; then
-        if is_subvolume "$copydir"; then
-            subvolume_delete_recursive "$copydir" ||
-                die "Unable to delete subvolume %s" "$copydir"
-        else
-            # avoid change of filesystem in case of an umount failure
-            rm --recursive --force --one-file-system "$copydir" ||
-                die "Unable to delete %s" "$copydir"
-        fi
-        btrfs subvolume snapshot "$rootdir" "$copydir" >/dev/null ||
+    stat_busy "Synchronizing chroot copy [%s] -> [%s]" "$chrootdir/root" "$copy"
+    if is_btrfs "$chrootdir" && ! mountpoint -q "$copydir"; then
+        subvolume_delete_recursive "$copydir" ||
+            die "Unable to delete subvolume %s" "$copydir"
+        btrfs subvolume snapshot "$chrootdir/root" "$copydir" >/dev/null ||
             die "Unable to create subvolume %s" "$copydir"
     else
         mkdir -p "$copydir"
-        rsync -a --delete -q -W -x "$rootdir/" "$copydir"
+        rsync -a --delete -q -W -x "$chrootdir/root/" "$copydir"
     fi
     stat_done
 
@@ -149,8 +146,7 @@ install_packages() {
 
     cp -- "${install_pkgs[@]}" "$copydir/root/"
     chroot-run \
-        -r "${bindmounts_ro[@]}" \
-        -r "${bindmounts_rw[@]}" \
+        -b "${bindmounts[@]}" \
         "$copydir" \
         bash -c 'yes y | pacman -U -- "$@"' -bash "${pkgnames[@]/#//root/}"
     ret=$?
@@ -225,14 +221,8 @@ _chrootbuild() {
     sudo --preserve-env=SOURCE_DATE_EPOCH -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
     ret=$?
     case $ret in
-        0)
+        0|14)
             return 0;;
-        14)
-            # whitelist "The package failed to install." but only if there are multiple split packages
-            # in which case they might be conflicting
-            local pkgfiles=(/pkgdest/*.pkg.tar.xz)
-            (( ${#pkgfiles[@]} > 1))
-            return $?;;
         *)
             return $ret;;
     esac
@@ -255,9 +245,6 @@ download_sources() {
         env SRCDEST="$SRCDEST" BUILDDIR="$WORKDIR" \
         makepkg --config="$copydir/etc/makepkg.conf" --verifysource -o "${verifysource_args[@]}" ||
         die "Could not download sources."
-
-    # Clean up garbage from verifysource
-#     rm -rf "$builddir"
 }
 
 move_products() {
@@ -293,18 +280,19 @@ move_products() {
 
 orig_argv=("$0" "$@")
 
-opts='hcur:I:l:nTD:d:U:'
+opts='hcur:I:l:nNCTb:U:'
 
 while getopts "${opts}" arg; do
     case "$arg" in
         c) clean_first=1 ;;
-        D) bindmounts_ro+=("$OPTARG") ;;
-        d) bindmounts_rw+=("$OPTARG") ;;
+        b) bindmounts+=("$OPTARG") ;;
         u) update_first=1 ;;
         r) passeddir="$OPTARG" ;;
         I) install_pkgs+=("$OPTARG") ;;
         l) copy="$OPTARG" ;;
         n) run_namcap=1; makepkg_args+=(--install) ;;
+        N) run_nocheck=1; makepkg_args+=(--nocheck) ;;
+        C) run_checkpkg=1 ;;
         T) temp_chroot=1; copy+="-$$" ;;
         U) makepkg_user="$OPTARG" ;;
         h|*) usage ;;
@@ -341,12 +329,12 @@ for arg in "${@:$OPTIND}"; do
     esac
 done
 
-load_user_info
-
 umask 0022
 
-load_vars "${USERCONFDIR}/pacman/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
+ORIG_HOME=$HOME
+IFS=: read -r _ _ _ _ _ HOME _ < <(getent passwd "${SUDO_USER:-$USER}")
+load_makepkg_config
+HOME=$ORIG_HOME
 
 # Use PKGBUILD directory if these don't exist
 [[ -d $PKGDEST ]]    || PKGDEST=$PWD
@@ -358,14 +346,13 @@ load_vars /etc/makepkg.conf
 lock 9 "$copydir.lock" "Locking chroot copy [%s]" "$copy"
 
 if [[ ! -d $copydir ]] || (( clean_first )); then
-    sync_chroot "$chrootdir/root" "$copydir" "$copy"
+    sync_chroot "$chrootdir" "$copydir" "$copy"
 fi
 
-bindmounts_rw+=("${PWD}:/startdir" "${SRCDEST}:/srcdest")
+bindmounts+=("-B:${PWD}:/startdir" "-B:${SRCDEST}:/srcdest")
 
 (( update_first )) && chroot-run \
-        -r "${bindmounts_ro[*]}" \
-        -w "${bindmounts_rw[*]}" \
+        -b "${bindmounts[*]}" \
         "$copydir" \
         pacman -Syuu --noconfirm
 
@@ -386,11 +373,11 @@ download_sources
 prepare_chroot
 
 if chroot-run \
-    -r "${bindmounts_ro[*]}" \
-    -w "${bindmounts_rw[*]}" \
+    -b "${bindmounts[*]}" \
     "$copydir" \
     /chrootbuild "${makepkg_args[@]}"
 then
+    mapfile -t pkgnames < <(sudo -u "$makepkg_user" bash -c 'source PKGBUILD; printf "%s\n" "${pkgname[@]}"')
     move_products
 else
     (( ret += 1 ))
@@ -405,6 +392,30 @@ if (( ret != 0 )); then
         die "Build failed, check %s/build" "$copydir"
     fi
 else
+    if (( run_checkpkg )); then
+        msg "Running checkpkg"
+
+        mapfile -t remotepkgs < <(pacman --config "$copydir"/etc/pacman.conf \
+            --dbpath "$copydir"/var/lib/pacman \
+            -Sddp "${pkgnames[@]}")
+
+        if ! wait $!; then
+            warning "Skipped checkpkg due to missing repo packages"
+            exit 0
+        fi
+        # download package files if any non-local location exists
+        for remotepkg in "${remotepkgs[@]}"; do
+            if [[ $remotepkg != file://* ]]; then
+                msg2 "Downloading current versions"
+                chroot-run "$copydir" pacman --noconfirm -Swdd "${pkgnames[@]}"
+                mapfile -t remotepkgs < <(pacman --config "$copydir"/etc/pacman.conf \
+                    --dbpath "$copydir"/var/lib/pacman \
+                    -Sddp "${pkgnames[@]}")
+                break
+            fi
+        done
+        msg2 "Checking packages"
+        sudo -u "$makepkg_user" checkpkg --rmdir --warn "${remotepkgs[@]/#file:\/\//}"
+    fi
     true
 fi
-

bin/pkg/pkg2yaml.in

@@ -14,7 +14,7 @@
 
 . @libdir@/artools/util-base.sh
 
-write_attr(){
+srcyaml_write_attr(){
     local ident1="$1" ident2="$2" ident3="$3"
     local attrname=$4 attrvalues=("${@:5}")
 
@@ -24,47 +24,41 @@ write_attr(){
     attrvalues=("${attrvalues[@]%[[:space:]]}")
 
     case $attrname in
-        makedepends|checkdepends|depends|provides|arch)
+        pkgver|pkgrel|epoch|url|install|changelog)
+            for v in ${attrvalues[@]};do
+                Yaml+=$(write_yaml_map $ident3 "$attrname" "$v")
+            done
+        ;;
+        *)
             Yaml+=$(write_yaml_map $ident1 "$attrname")
             for v in ${attrvalues[@]};do
                 Yaml+=$(write_yaml_seq $ident2 "$v")
             done
         ;;
-        *)
-            for v in ${attrvalues[@]};do
-                Yaml+=$(write_yaml_map $ident3 "$attrname" "$v")
-            done
-        ;;
     esac
 }
 
-extract_info() {
+pkgbuild_extract_to_yaml() {
     local pkgname=$1 attrname=$2 isarray=$3 outvalue=
 
     if get_pkgbuild_attribute "$pkgname" "$attrname" "$isarray" 'outvalue'; then
-        [[ -z $pkgname ]] && write_attr 2 4 2 "$attrname" "${outvalue[@]}"
-        [[ -n $pkgname ]] && write_attr 4 6 2 "$attrname" "${outvalue[@]}"
+        [[ -z $pkgname ]] && srcyaml_write_attr 2 4 2 "$attrname" "${outvalue[@]}"
+        [[ -n $pkgname ]] && srcyaml_write_attr 4 6 2 "$attrname" "${outvalue[@]}"
     fi
 }
 
-write_details() {
+srcyaml_write_section_details() {
     local attr package_arch a
-    local multivalued_arch_attrs=(provides depends makedepends checkdepends)
-
-    local singlevalued=()
-    local multivalued=(arch provides depends checkdepends)
-
-    if [[ -z "$1" ]];then
-        singlevalued=(pkgver pkgrel epoch)
-        multivalued=(arch provides depends makedepends checkdepends)
-    fi
+    local multivalued_arch_attrs=(source provides conflicts depends replaces
+	                              optdepends makedepends checkdepends)
+# 	                              "${known_hash_algos[@]/%/sums}")
 
     for attr in "${singlevalued[@]}"; do
-        extract_info "$1" "$attr" 0
+        pkgbuild_extract_to_yaml "$1" "$attr" 0
     done
 
     for attr in "${multivalued[@]}"; do
-        extract_info "$1" "$attr" 1
+        pkgbuild_extract_to_yaml "$1" "$attr" 1
     done
 
     get_pkgbuild_attribute "$1" 'arch' 1 'package_arch'
@@ -73,47 +67,55 @@ write_details() {
         [[ $a = any ]] && continue
 
         for attr in "${multivalued_arch_attrs[@]}"; do
-            extract_info "$1" "${attr}_$a" 1
+            pkgbuild_extract_to_yaml "$1" "${attr}_$a" 1
         done
     done
 }
 
-write_pkg_yaml(){
-
-    Yaml=$(write_yaml_header)
+yaml_write_global() {
+    local singlevalued=(pkgver pkgrel epoch url install changelog) #pkgdesc
+    local multivalued=(arch groups license checkdepends makedepends
+                    depends provides conflicts replaces)
+                    #noextract options backup optdepends
+                    #source validpgpkeys "${known_hash_algos[@]/%/sums}")
 
     Yaml+=$(write_empty_line)
-
-    local full=$(get_full_version)
-
-    local ver=${full:-0}
-
-    pkgbase=${pkgbase:-${pkgname[0]}}
-
     Yaml+=$(write_yaml_map 0 "pkgbase")
-    Yaml+=$(write_yaml_map 2 "pkgname" "${pkgbase}")
-    ${details} && write_details ''
-    Yaml+=$(write_yaml_map 2 "fullver" "${ver}")
-
+    Yaml+=$(write_yaml_map 2 "name" "${pkgbase:-$pkgname}")
+    ${details} && srcyaml_write_section_details ''
     Yaml+=$(write_empty_line)
+}
 
-    Yaml+=$(write_yaml_map 0 "package")
+yaml_write_package() {
+    local singlevalued=(url install changelog) #pkgdesc
+    local multivalued=(arch groups license checkdepends depends
+                    provides conflicts replaces) #options backup optdepends)
+
+    Yaml+=$(write_yaml_map 0 "packages")
     for pkg in "${pkgname[@]}"; do
         Yaml+=$(write_yaml_seq_map 2 "pkgname" "$pkg")
-        ${details} && write_details "$pkg"
+        ${details} && srcyaml_write_section_details "$pkg"
     done
-
     Yaml+=$(write_empty_line)
+}
 
+yaml_write_fileinfo(){
+    local version=$(get_full_version)
+    Yaml+=$(write_yaml_map 0 "version" "${version:-0}")
+    Yaml+=$(write_empty_line)
     local pkgfile=$(print_all_package_names)
-
-    Yaml+=$(write_yaml_map 0 "pkgfile")
+    Yaml+=$(write_yaml_map 0 "files")
     for f in ${pkgfile[@]};do
         Yaml+=$(write_yaml_seq 2 "${f##*/}")
     done
-
     Yaml+=$(write_empty_line)
+}
 
+write_srcyaml(){
+    Yaml=$(write_yaml_header)
+    yaml_write_global
+    yaml_write_package
+    yaml_write_fileinfo
     printf '%s' "${Yaml}"
 }
 
@@ -139,11 +141,13 @@ done
 
 shift $(( $OPTIND - 1 ))
 
-[[ -f "$1"/PKGBUILD ]] || die "%s/PKGBUILD does not exist!" "$1"
-PACKAGE="$1"/PKGBUILD; shift
+srcpath=$(readlink -f "$1")
+
+[[ -f "$srcpath"/PKGBUILD ]] || die "%s/PKGBUILD does not exist!" "$srcpath"
+PACKAGE="$srcpath"/PKGBUILD; shift
 
 . "$PACKAGE"
 
-. /etc/makepkg.conf
+load_makepkg_config
 
-write_pkg_yaml
+write_srcyaml

bin/pkg/signpkg.in

@@ -0,0 +1,46 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-19 artoo@artixlinux.org
+# Copyright (C) 2018 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+. @libdir@/artools/util-pkg.sh
+
+prepare_artools
+
+load_makepkg_config
+
+passfiles="$@"
+
+sign_pkg(){
+    local file_to_sign="$1"
+
+    if [ ! -e "$file_to_sign" ]; then
+        error "%s does not exist!" "$file_to_sign"
+        exit 1
+    fi
+
+    if [[ -n "${BUILDBOT_GPGP}" ]]; then
+        msg "Signing [%s]" "${file_to_sign##*/}"
+        gpg --batch --passphrase "${BUILDBOT_GPGP}" --detach-sign "$file_to_sign"
+    else
+        msg2 "Signing [%s] with key %s" "${file_to_sign##*/}" "${GPGKEY}..."
+        gpg --detach-sign --use-agent -u "${GPGKEY}" "$file_to_sign"
+    fi
+}
+
+for pkg in ${passfiles[@]}; do
+    if pkgfile=$(find_cached_pkgfile "$pkg");then
+        msg2 "Found: %s" "${pkgfile}"
+        [[ -e "${pkgfile}".sig ]] && rm "${pkgfile}".sig
+        sign_pkg "${pkgfile}"
+    fi
+done

data/conf/artools-base.conf

@@ -0,0 +1,9 @@
+#############################################
+################ artools-base ###############
+#############################################
+
+# build dir where buildpkg or buildiso chroots are created
+# CHROOTS_DIR=/var/lib/artools
+
+# the workspace directory
+# WORKSPACE_DIR="/home/${OWNER}/artools-workspace"

data/conf/artools-iso.conf

@@ -0,0 +1,21 @@
+#############################################
+################ artools-iso ################
+#############################################
+
+# the iso storage directory
+# ISO_POOL="${WORKSPACE_DIR}/iso"
+
+# the dist release; default: auto
+# ISO_VERSION=$(date +%Y%m%d)
+
+# possible values: openrc, runit, s6
+# INITSYS="openrc"
+
+# gpg key; leave empty or commented to skip img signing
+# GPG_KEY=""
+
+# set upload bandwidth limit in kB/s
+# UPLIMIT=1000
+
+# the server user
+# ACCOUNT=[SetUser]

data/conf/artools-pkg.conf

@@ -1,13 +1,3 @@
-#############################################
-################ artools-base ###############
-#############################################
-
-# build dir where buildpkg or buildiso chroots are created
-# CHROOTS_DIR=/var/lib/artools
-
-# the workspace directory
-# WORKSPACE_DIR="/home/${OWNER}/artools-workspace"
-
 #############################################
 ################ artools-pkg ################
 #############################################
@@ -19,16 +9,21 @@
 
 # TREE_DIR_ARTIX=${WORKSPACE_DIR}/artixlinux
 
+# customize buildtree, packages and community should be enabled
 # TREE_NAMES_ARTIX=(
 #         packages
 #         community
 #         packages-kernel
+#         packages-net
+#         packages-gfx
 #         packages-openrc
 #         packages-runit
+#         packages-s6
 #         packages-media
 #         packages-xorg
 #         packages-python
 #         packages-perl
+#         packages-java
 #         packages-qt5
 #         packages-devel
 #         packages-ruby
@@ -38,6 +33,8 @@
 #         packages-lxqt
 #         packages-mate
 #         packages-kde
+#         packages-xfce
+#         packages-wm
 # )
 
 # HOST_TREE_ARCH=git://git.archlinux.org/svntogit
@@ -49,25 +46,3 @@
 
 # default mirror for sogrep
 # REPOS_MIRROR="http://mirror1.artixlinux.org/repos"
-
-#############################################
-################ artools-iso ################
-#############################################
-
-# the iso storage directory
-# ISO_POOL="${WORKSPACE_DIR}/iso"
-
-# the dist release; default: auto
-# ISO_VERSION=$(date +%Y%m%d)
-
-# possible values: openrc, runit (s6 not yet supported)
-# INITSYS="openrc"
-
-# gpg key; leave empty or commented to skip sfs signing
-# GPG_KEY=""
-
-# set upload bandwidth limit in kB/s
-# UPLIMIT=1000
-
-# the server user
-# ACCOUNT=[SetUser]

data/iso/mkinitcpio.conf

@@ -1,5 +0,0 @@
-MODULES=(loop dm-snapshot)
-
-HOOKS=(base udev artix_shutdown artix artix_loop_mnt artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs artix_kms modconf block filesystems keyboard keymap)
-
-COMPRESSION="xz"

data/pacman/makepkg.conf

@@ -132,18 +132,18 @@ DBGSRCDIR="/usr/src/debug"
 COMPRESSGZ=(gzip -c -f -n)
 COMPRESSBZ2=(bzip2 -c -f)
 COMPRESSXZ=(xz -c -z -)
+COMPRESSZST=(zstd -c -T0 --ultra -20 -)
 COMPRESSLRZ=(lrzip -q)
 COMPRESSLZO=(lzop -q)
 COMPRESSZ=(compress -c -f)
+COMPRESSLZ4=(lz4 -q)
+COMPRESSLZ=(lzip -c -f)
 
 #########################################################################
 # EXTENSION DEFAULTS
 #########################################################################
 #
-# WARNING: Do NOT modify these variables unless you know what you are
-#          doing.
-#
-PKGEXT='.pkg.tar.xz'
+PKGEXT='.pkg.tar.zst'
 SRCEXT='.src.tar.gz'
 
 # vim: set ft=sh ts=2 sw=2 et:

data/pacman/pacman-default.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup

data/pacman/pacman-docker.conf

@@ -0,0 +1,111 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+NoExtract  = usr/share/help/* !usr/share/help/en*
+NoExtract  = usr/share/gtk-doc/html/* usr/share/doc/*
+NoExtract  = usr/share/locale/* usr/share/X11/locale/* usr/share/i18n/*
+NoExtract   = !*locale*/en*/* !usr/share/i18n/charmaps/UTF-8.gz !usr/share/*locale*/locale.*
+NoExtract   = !usr/share/*locales/en_?? !usr/share/*locales/i18n* !usr/share/*locales/iso*
+NoExtract   = !usr/share/*locales/trans*
+NoExtract  = usr/share/man/* usr/share/info/*
+NoExtract  = usr/share/vim/vim*/lang/*
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+CheckSpace
+VerbosePkgLists
+
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Artix Linux
+# packagers with `pacman-key --populate archlinux artix`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The gremlins repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[system]
+Include = /etc/pacman.d/mirrorlist
+
+[world]
+Include = /etc/pacman.d/mirrorlist
+
+[galaxy]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the lib32 repositories as required here.
+
+#[lib32]
+#Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+
+#
+# ARCHLINUX
+#
+
+#[extra]
+#Include = /etc/pacman.d/mirrorlist-arch
+
+#[community]
+#Include = /etc/pacman.d/mirrorlist-arch
+
+#[multilib]
+#Include = /etc/pacman.d/mirrorlist-arch

data/pacman/pacman-gnome-wobble.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup

data/pacman/pacman-goblins.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup

data/pacman/pacman-gremlins.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup

data/pacman/pacman-kde-wobble.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup

data/pacman/pacman-lib32-goblins.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup

data/pacman/pacman-lib32-gremlins.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup

data/pacman/pacman-lib32.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup

initcpio/hooks/artix

@@ -8,36 +8,36 @@ _mnt_dmsnapshot() {
     local ro_dev ro_dev_size rw_dev
 
     ro_dev=$(losetup --find --show --read-only "${img}")
-    echo ${ro_dev} >> /run/artix/used_block_devices
+    echo ${ro_dev} >> ${live_root}/used_block_devices
     ro_dev_size=$(blockdev --getsz ${ro_dev})
 
     if [[ "${cow_persistent}" == "P" ]]; then
-        if [[ -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '/run/artix/cowspace/${cow_directory}/${img_name}.cow', using as persistent."
+        if [[ -f "${cow}/${cow_directory}/${img_name}.cow" ]]; then
+            msg ":: Found '${cow}/${cow_directory}/${img_name}.cow', using as persistent."
         else
-            msg ":: Creating '/run/artix/cowspace/${cow_directory}/${img_name}.cow' as persistent."
-            truncate -s "${cow_spacesize}" "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
+            msg ":: Creating '${cow}/${cow_directory}/${img_name}.cow' as persistent."
+            truncate -s "${cow_spacesize}" "${cow}/${cow_directory}/${img_name}.cow"
         fi
     else
-        if [[ -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '/run/artix/cowspace/${cow_directory}/${img_name}.cow' but non-persistent requested, removing."
-            rm -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
+        if [[ -f "${cow}/${cow_directory}/${img_name}.cow" ]]; then
+            msg ":: Found '${cow}/${cow_directory}/${img_name}.cow' but non-persistent requested, removing."
+            rm -f "${cow}/${cow_directory}/${img_name}.cow"
         fi
-        msg ":: Creating '/run/artix/cowspace/${cow_directory}/${img_name}.cow' as non-persistent."
-        truncate -s "${cow_spacesize}" "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
+        msg ":: Creating '${cow}/${cow_directory}/${img_name}.cow' as non-persistent."
+        truncate -s "${cow_spacesize}" "${cow}/${cow_directory}/${img_name}.cow"
     fi
 
-    rw_dev=$(losetup --find --show "/run/artix/cowspace/${cow_directory}/${img_name}.cow")
-    echo ${rw_dev} >> /run/artix/used_block_devices
+    rw_dev=$(losetup --find --show "${cow}/${cow_directory}/${img_name}.cow")
+    echo ${rw_dev} >> ${live_root}/used_block_devices
 
     dmsetup create ${dm_snap_name} --table "0 ${ro_dev_size} snapshot ${ro_dev} ${rw_dev} ${cow_persistent} ${cow_chunksize}"
 
     if [[ "${cow_persistent}" != "P" ]]; then
-        rm -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
+        rm -f "${cow}/${cow_directory}/${img_name}.cow"
     fi
 
     _mnt_dev "/dev/mapper/${dm_snap_name}" "${mnt}" "-w" "defaults"
-    echo $(readlink -f /dev/mapper/${dm_snap_name}) >> /run/artix/used_block_devices
+    echo $(readlink -f /dev/mapper/${dm_snap_name}) >> ${live_root}/used_block_devices
 }
 
 # args: source, newroot, mountpoint
@@ -45,8 +45,8 @@ _mnt_overlayfs() {
     local src="${1}"
     local newroot="${2}"
     local mnt="${3}"
-    local work_dir="/run/artix/overlay_root/work"
-    local upper_dir="/run/artix/overlay_root/upper"
+    local work_dir="${overlay_root}/work"
+    local upper_dir="${overlay_root}/upper"
 
     mkdir -p "${upper_dir}" "${work_dir}"
 
@@ -63,15 +63,15 @@ _mnt_sfs() {
 
     if [[ "${copytoram}" == "y" ]]; then
         msg -n ":: Copying squashfs image to RAM..."
-        if ! "${oper}" "${img}" "/run/artix/copytoram/${img_fullname}" ; then
-            echo "ERROR: while copy '${img}' to '/run/artix/copytoram/${img_fullname}'"
+        if ! "${oper}" "${img}" "${cp2ram}/${img_fullname}" ; then
+            echo "ERROR: while copy '${img}' to '${cp2ram}/${img_fullname}'"
             launch_interactive_shell
         fi
-        img="/run/artix/copytoram/${img_fullname}"
+        img="${cp2ram}/${img_fullname}"
         msg "done."
     fi
     sfs_dev=$(losetup --find --show --read-only "${img}")
-    echo ${sfs_dev} >> /run/artix/used_block_devices
+    echo ${sfs_dev} >> ${live_root}/used_block_devices
     _mnt_dev "${sfs_dev}" "${mnt}" "-r" "defaults"
 }
 
@@ -105,8 +105,8 @@ _mnt_dev() {
 
 _verify_checksum() {
     local _status
-    cd "/run/artix/bootmnt/${artixbasedir}/${arch}"
-    sha512sum -c $1.sha512 > /tmp/checksum.log 2>&1
+    cd "${bootmnt}/${root}"
+    sha512sum -c $1.img.sha512 > /tmp/checksum.log 2>&1
     _status=$?
     cd "${OLDPWD}"
     return ${_status}
@@ -114,20 +114,19 @@ _verify_checksum() {
 
 _verify_signature() {
     local _status
-    cd "/run/artix/bootmnt/${artixbasedir}/${arch}"
-    gpg --homedir /gpg --status-fd 1 --verify $1.sfs.sig 2>/dev/null | grep -qE '^\[GNUPG:\] GOODSIG'
+    cd "${bootmnt}/${root}"
+    gpg --homedir /gpg --status-fd 1 --verify $1.img.sig 2>/dev/null | grep -qE '^\[GNUPG:\] GOODSIG'
     _status=$?
     cd "${OLDPWD}"
     return ${_status}
 }
 
 run_hook() {
-    [[ -z "${arch}" ]] && arch="$(uname -m)"
     [[ -z "${copytoram_size}" ]] && copytoram_size="75%"
-    [[ -z "${artixbasedir}" ]] && artixbasedir="artix"
+    [[ -z "${root}" ]] && root="LiveOS"
 
-    [[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="arch"
-    [[ -z "${artixdevice}" ]] && artixdevice="/dev/disk/by-label/${artixlabel}"
+    [[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="artix"
+    [[ -z "${artixdevice}" ]] && artixdevice="/dev/disk/by-label/${label}"
     [[ -z "${cow_spacesize}" ]] && cow_spacesize="256M"
     [[ -z "${overlay_root_size}" ]] && overlay_root_size="75%"
 
@@ -141,109 +140,135 @@ run_hook() {
     fi
 
     [[ -z "${cow_flags}" ]] && cow_flags="defaults"
-    [[ -z "${cow_directory}" ]] && cow_directory="persistent_${artixlabel}/${arch}"
+    [[ -z "${cow_directory}" ]] && cow_directory="persistent_${label}"
     [[ -z "${cow_chunksize}" ]] && cow_chunksize="8"
+    [[ -z "${overlay}" ]] && overlay=""
+
+    lower_dir=''
+    live_root="/run/artix"
+    bootmnt="${live_root}/bootmnt"
+    overlay_root="${live_root}/overlay_root"
+    cow="${live_root}/cowspace"
+    cp2ram="${live_root}/copytoram"
 
     # set mount handler for artix
     mount_handler="artix_mount_handler"
 }
 
+_check_sum() {
+    local fs="${1}"
+    if [[ -f "${bootmnt}/${root}/${fs}.img" ]]; then
+        if [[ -f "${bootmnt}/${root}/${fs}.img.md5" ]]; then
+            msg -n ":: Self-test requested, please wait..."
+            if _verify_checksum "${fs}"; then
+                msg "done. Checksum is OK, continue booting."
+            else
+                echo "ERROR: one or more files are corrupted"
+                echo "see /tmp/checksum.log for details"
+                launch_interactive_shell
+            fi
+        else
+            echo "ERROR: checksum=y option specified but ${root}/${fs}.img.md5 not found"
+            launch_interactive_shell
+        fi
+    fi
+}
+
+_check_sig() {
+    local fs="${1}"
+    if [[ -f "${bootmnt}/${root}/${fs}.img" ]]; then
+        if [[ -f "${bootmnt}/${root}/${fs}.img.sig" ]]; then
+            msg -n ":: Signature verification requested, please wait..."
+            if _verify_signature "${fs}"; then
+                msg "done. Signature is OK, continue booting."
+            else
+                echo "ERROR: one or more files are corrupted"
+                launch_interactive_shell
+            fi
+        else
+            echo "ERROR: verify=y option specified but ${root}/${fs}.img.sig not found"
+            launch_interactive_shell
+        fi
+    fi
+}
+
+_gen_arg() {
+    local arg="${1}"
+    echo "${lower_dir:-}${lower_dir:+:}${arg}"
+}
+
+_mount_root_overlayfs() {
+    local sfs="${1}"
+    local src="${bootmnt}/${root}"
+    local dest_sfs="${live_root}/sfs"
+    local dest_img="${live_root}/img"
+
+    if [[ -f "${src}/${sfs}.img" ]]; then
+        _mnt_sfs "${src}/${sfs}.img" "${dest_sfs}/${sfs}"
+        local find_img="${dest_sfs}/${sfs}/LiveOS/${sfs}.img"
+        if [[ -f "${find_img}" ]]; then
+            mkdir -p ${dest_img}
+            lower_dir=$(_gen_arg "${dest_img}/${sfs}")
+            _mnt_dmsnapshot "${find_img}" "${dest_img}/${sfs}"
+        else
+            lower_dir=$(_gen_arg "${dest_sfs}/${sfs}")
+        fi
+    fi
+}
+
 # This function is called normally from init script, but it can be called
 # as chain from other mount handlers.
 # args: /path/to/newroot
 artix_mount_handler() {
     local newroot="${1}"
 
-    if ! mountpoint -q "/run/artix/bootmnt"; then
-        _mnt_dev "${artixdevice}" "/run/artix/bootmnt" "-r" "defaults"
+    if ! mountpoint -q "${bootmnt}"; then
+        _mnt_dev "${artixdevice}" "${bootmnt}" "-r" "defaults"
         if [[ "${copytoram}" != "y" ]]; then
-            echo $(readlink -f ${artixdevice}) >> /run/artix/used_block_devices
+            echo $(readlink -f ${artixdevice}) >> ${live_root}/used_block_devices
         fi
     fi
 
     if [[ "${checksum}" == "y" ]]; then
-        for fs in rootfs livefs;do
-            if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sfs" ]]; then
-                if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sha512" ]]; then
-                    msg -n ":: Self-test requested, please wait..."
-                    if _verify_checksum "${fs}"; then
-                        msg "done. Checksum is OK, continue booting."
-                    else
-                        echo "ERROR: one or more files are corrupted"
-                        echo "see /tmp/checksum.log for details"
-                        launch_interactive_shell
-                    fi
-                else
-                    echo "ERROR: checksum=y option specified but ${artixbasedir}/${arch}/${fs}.sha512 not found"
-                    launch_interactive_shell
-                fi
-            fi
-        done
+        _check_sum "rootfs"
+        [[ -n "${overlay}" ]] && _check_sum "${overlay}"
     fi
 
     if [[ "${verify}" == "y" ]]; then
-        for fs in rootfs livefs;do
-            if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sfs" ]]; then
-                if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sfs.sig" ]]; then
-                    msg -n ":: Signature verification requested, please wait..."
-                    if _verify_signature "${fs}"; then
-                        msg "done. Signature is OK, continue booting."
-                    else
-                        echo "ERROR: one or more files are corrupted"
-                        launch_interactive_shell
-                    fi
-                else
-                    echo "ERROR: verify=y option specified but ${artixbasedir}/${arch}/${fs}.sfs.sig not found"
-                    launch_interactive_shell
-                fi
-            fi
-        done
+        _check_sig "rootfs"
+        [[ -n "${overlay}" ]] && _check_sig "${overlay}"
     fi
 
     if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Mounting /run/artix/copytoram (tmpfs) filesystem, size=${copytoram_size}"
-        mkdir -p /run/artix/copytoram
-        mount -t tmpfs -o "size=${copytoram_size}",mode=0755 copytoram /run/artix/copytoram
+        msg ":: Mounting ${cp2ram} (tmpfs) filesystem, size=${copytoram_size}"
+        mkdir -p ${cp2ram}
+        mount -t tmpfs -o "size=${copytoram_size}",mode=0755 copytoram ${cp2ram}
     fi
 
     if [[ -n "${cow_device}" ]]; then
-        _mnt_dev "${cow_device}" "/run/artix/cowspace" "-r" "${cow_flags}"
-        echo $(readlink -f ${cow_device}) >> /run/artix/used_block_devices
-        mount -o remount,rw "/run/artix/cowspace"
+        _mnt_dev "${cow_device}" "${cow}" "-r" "${cow_flags}"
+        echo $(readlink -f ${cow_device}) >> ${live_root}/used_block_devices
+        mount -o remount,rw "${cow}"
     else
-        msg ":: Mounting /run/artix/cowspace (tmpfs) filesystem, size=${cow_spacesize}..."
-        mkdir -p /run/artix/cowspace
-        mount -t tmpfs -o "size=${cow_spacesize}",mode=0755 cowspace /run/artix/cowspace
+        msg ":: Mounting ${cow} (tmpfs) filesystem, size=${cow_spacesize}..."
+        mkdir -p ${cow}
+        mount -t tmpfs -o "size=${cow_spacesize}",mode=0755 cowspace ${cow}
     fi
-    mkdir -p -m 0700 "/run/artix/cowspace/${cow_directory}"
+    mkdir -p -m 0700 "${cow}/${cow_directory}"
 
     msg -n ":: Mounting overlay root (tmpfs) filesystem, size=${overlay_root_size}..."
-    mkdir -p /run/artix/overlay_root
-    mount -t tmpfs -o "size=${overlay_root_size}",mode=0755 overlay_root /run/artix/overlay_root
+    mkdir -p ${overlay_root}
+    mount -t tmpfs -o "size=${overlay_root_size}",mode=0755 overlay_root ${overlay_root}
 
-    local src="/run/artix/bootmnt/${artixbasedir}/${arch}"
-    local dest_sfs="/run/artix/sfs" dest_img="/run/artix/img"
-    local lower_dir
-
-    for sfs in livefs rootfs;do
-        if [[ -f "${src}/${sfs}.sfs" ]]; then
-            _mnt_sfs "${src}/${sfs}.sfs" "${dest_sfs}/${sfs}"
-            if [[ -f "${dest_sfs}/${sfs}/${sfs}.img" ]]; then
-                mkdir -p ${dest_img}
-                lower_dir=${lower_dir:-}${lower_dir:+:}"${dest_img}/${sfs}"
-                _mnt_dmsnapshot "${dest_sfs}/${sfs}/${sfs}.img" "${dest_img}/${sfs}"
-            else
-                lower_dir=${lower_dir:-}${lower_dir:+:}"${dest_sfs}/${sfs}"
-            fi
-        fi
-    done
+    [[ -n "${overlay}" ]] && _mount_root_overlayfs "${overlay}"
+    _mount_root_overlayfs "rootfs"
 
     _mnt_overlayfs "${lower_dir}" "${newroot}" "/"
 
     if [[ "${copytoram}" == "y" ]]; then
-        umount -d /run/artix/bootmnt
-        mkdir -p /run/artix/bootmnt/${artixbasedir}/${arch}
-        mount -o bind /run/artix/copytoram /run/artix/bootmnt/${artixbasedir}/${arch}
+        umount -d ${bootmnt}
+        mkdir -p ${bootmnt}/${root}
+        mount -o bind ${cp2ram} ${bootmnt}/${root}
     fi
 }
 

initcpio/hooks/artix_loop_mnt

@@ -14,15 +14,15 @@ artix_loop_mount_handler () {
     local _dev_loop
 
     msg ":: Setup a loop device from ${img_loop} located at device ${img_dev}"
-    _mnt_dev "${img_dev}" "/run/artix/img_dev" "-r" "${img_flags}"
+    _mnt_dev "${img_dev}" "${live_root}/img_dev" "-r" "${img_flags}"
     if [[ "${copytoram}" != "y" ]]; then
-        echo $(readlink -f ${img_dev}) >> /run/artix/used_block_devices
+        echo $(readlink -f ${img_dev}) >> ${live_root}/used_block_devices
     fi
 
-    if _dev_loop=$(losetup --find --show --read-only "/run/artix/img_dev/${img_loop}"); then
+    if _dev_loop=$(losetup --find --show --read-only "${live_root}/img_dev/${img_loop}"); then
         artixdevice="${_dev_loop}"
     else
-        echo "ERROR: Setting loopback device for file '/run/artix/img_dev/${img_loop}'"
+        echo "ERROR: Setting loopback device for file '${live_root}/img_dev/${img_loop}'"
         launch_interactive_shell
     fi
 
@@ -30,6 +30,6 @@ artix_loop_mount_handler () {
 
     if [[ "${copytoram}" == "y" ]]; then
         losetup -d ${_dev_loop} 2>/dev/null
-        umount /run/artix/img_dev
+        umount ${live_root}/img_dev
     fi
 }

initcpio/hooks/artix_pxe_http

@@ -17,13 +17,13 @@ run_hook() {
 # Fetch a file with CURL
 #
 # $1 URL
-# $2 Destination directory inside httpspace/${artixbasedir}
+# $2 Destination directory inside httpspace/${root}
 _curl_get() {
     local _url="${1}"
     local _dst="${2}"
 
     msg ":: Downloading '${_url}'"
-    if ! curl -L -f -o "/run/artix/httpspace/${artixbasedir}${_dst}/${_url##*/}" --create-dirs "${_url}"; then
+    if ! curl -L -f -o "${live_root}/httpspace/${root}${_dst}/${_url##*/}" --create-dirs "${_url}"; then
         echo "ERROR: Downloading '${_url}'"
         echo "   Falling back to interactive prompt"
         echo "   You can try to fix the problem manually, log out when you are finished"
@@ -31,29 +31,33 @@ _curl_get() {
     fi
 }
 
+_get_sfs() {
+    local _sfs="${2}"
+    local _src=${artix_http_srv}${root}
+    if [[ ! -z "$( curl -s --head "${_src}/${_sfs}.img" | grep "OK" )" ]]; then
+        _curl_get "${_src}/${_sfs}.img" "/"
+
+        if [[ "${checksum}" == "y" ]]; then
+            _curl_get "${_src}/${_sfs}.md5" "/"
+        fi
+        if [[ "${verify}" == "y" ]]; then
+            _curl_get "${_src}/${_sfs}.img.sig" "/"
+        fi
+    fi
+}
+
 artix_pxe_http_mount_handler () {
     newroot="${1}"
 
-    msg ":: Mounting /run/artix/httpspace (tmpfs) filesystem, size='${artix_http_spc}'"
-    mkdir -p "/run/artix/httpspace"
-    mount -t tmpfs -o size="${artix_http_spc}",mode=0755 httpspace "/run/artix/httpspace"
+    msg ":: Mounting ${live_root}/httpspace (tmpfs) filesystem, size='${artix_http_spc}'"
+    mkdir -p "${live_root}/httpspace"
+    mount -t tmpfs -o size="${artix_http_spc}",mode=0755 httpspace "${live_root}/httpspace"
 
-    local _src=${artix_http_srv}${artixbasedir}/${arch}
+    _get_sfs "rootfs"
+    [[ -n "${overlay}" ]] && _mount_root_overlayfs "${overlay}"
 
-    for sfs in livefs rootfs;do
-        if [[ ! -z "$( curl -s --head "${_src}/${sfs}.sfs" | grep "OK" )" ]]; then
-            _curl_get "${_src}/${sfs}.sfs" "/${arch}"
-
-            if [[ "${checksum}" == "y" ]]; then
-                _curl_get "${_src}/${sfs}.md5" "/${arch}"
-            fi
-            if [[ "${verify}" == "y" ]]; then
-                _curl_get "${_src}/${sfs}.sfs.sig" "/${arch}"
-            fi
-        fi
-    done
-    mkdir -p "/run/artix/bootmnt"
-    mount -o bind /run/artix/httpspace /run/artix/bootmnt
+    mkdir -p "${bootmnt}"
+    mount -o bind ${live_root}/httpspace ${bootmnt}
 
     artix_mount_handler ${newroot}
 }

initcpio/hooks/artix_pxe_nfs

@@ -12,10 +12,10 @@ run_hook() {
 
 artix_nfs_mount_handler() {
     newroot="${1}"
-    mkdir -p "/run/artix/bootmnt"
+    mkdir -p "${bootmnt}"
     msg ":: Mounting '${artix_nfs_srv}'"
     # Do not put "${artix_nfs_opt}" nfsmount fails!
-    if ! nfsmount ${artix_nfs_opt} "${artix_nfs_srv}" "/run/artix/bootmnt"; then
+    if ! nfsmount ${artix_nfs_opt} "${artix_nfs_srv}" "${bootmnt}"; then
         echo "ERROR: Mounting '${artix_nfs_srv}'"
         echo "   Falling back to interactive prompt"
         echo "   You can try to fix the problem manually, log out when you are finished"

initcpio/script/artix_shutdown

@@ -5,8 +5,7 @@ mkdir /oldrun
 mount -n --move /oldroot/run /oldrun
 
 # Unmount all mounts now.
-#umount $(mount | awk '$3 ~/^\/oldroot/ {print $3}' | sort -r)
-umount $(mount | awk '$3 ~/^\/oldroot/ {if($3 != "/run/artix/bootmnt") print $3}' | sort -r)
+umount $(mount | awk '$3 ~/^\/oldroot/ {print $3}' | sort -r)
 
 # Remove all dm-snapshot devices.
 dmsetup remove_all
@@ -26,7 +25,7 @@ if [[ ! -d /oldrun/artix/copytoram ]]; then
     if [[ -d /oldrun/artix/img_dev ]]; then
         umount /oldrun/artix/img_dev
     else
-        umount /oldrun/artix/bootmnt
+        umount /oldrun/bootmnt
     fi
 fi
 

lib/base/message.sh

@@ -15,7 +15,7 @@
 # export LC_MESSAGES=C
 export LANG=C
 
-if [[ -t 2 ]]; then
+if [[ -t 2 && "$TERM" != dumb ]]; then
     colorize
 else
     declare -gr ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW=''

lib/base/util.sh

@@ -25,155 +25,15 @@ show_elapsed_time(){
     info "Time %s: %s minutes" "$1" "$(elapsed_time $2)"
 }
 
-load_vars() {
-    local var
-
-    [[ -f $1 ]] || return 1
-
-    for var in {SRC,SRCPKG,PKG,LOG}DEST MAKEFLAGS PACKAGER CARCH GPGKEY; do
-        [[ -z ${!var:-} ]] && eval "$(source "$1"; printf "%s='%s'" "$var" "${!var}")"
-    done
-
-    return 0
-}
-
 prepare_dir(){
     [[ ! -d $1 ]] && mkdir -p $1
 }
 
-get_disturl(){
-    . /usr/lib/os-release
-    echo "${HOME_URL}"
-}
-
 get_osname(){
     . /usr/lib/os-release
     echo "${NAME}"
 }
 
-init_artools_base(){
-
-    ARCH=$(uname -m)
-
-    CHROOTS_DIR=${CHROOTS_DIR:-'/var/lib/artools'}
-
-    WORKSPACE_DIR=${WORKSPACE_DIR:-"/home/${OWNER}/artools-workspace"}
-
-    prepare_dir "${WORKSPACE_DIR}"
-}
-
-init_artools_pkg(){
-
-    DOMAIN='artixlinux.org'
-
-    GIT_DOMAIN="gitea.${DOMAIN}"
-
-    GIT_URL="https://${GIT_DOMAIN}"
-
-    GIT_TOKEN=${GIT_TOKEN:-''}
-
-    TREE_DIR_ARTIX=${TREE_DIR_ARTIX:-"${WORKSPACE_DIR}/artixlinux"}
-
-    [[ -z ${TREE_NAMES_ARTIX[@]} ]] && \
-    TREE_NAMES_ARTIX=(
-            packages
-            community
-            packages-kernel
-            packages-openrc
-            packages-runit
-            packages-xorg
-            packages-python
-            packages-perl
-            packages-qt5
-            packages-devel
-            packages-ruby
-            packages-gtk
-            packages-gnome
-            packages-cinnamon
-            packages-lxqt
-            packages-mate
-            packages-kde
-    )
-
-    HOST_TREE_ARTIX=${HOST_TREE_ARTIX:-"gitea@${GIT_DOMAIN}:artixlinux"}
-
-    TREE_DIR_ARCH=${TREE_DIR_ARCH:-"${WORKSPACE_DIR}/archlinux"}
-
-    TREE_NAMES_ARCH=(packages community)
-
-    HOST_TREE_ARCH=${HOST_TREE_ARCH:-'git://git.archlinux.org/svntogit'}
-
-    CHROOTS_PKG="${CHROOTS_DIR}/buildpkg"
-
-    REPOS_ROOT=${REPOS_ROOT:-"${WORKSPACE_DIR}/repos"}
-
-    REPOS_MIRROR=${REPOS_MIRROR:-'http://mirror1.artixlinux.org/repos'}
-
-    DBEXT=${DBEXT:-'xz'}
-
-    LINKSDBEXT=${LINKSDBEXT:-"links.tar.${DBEXT}"}
-
-    PKGDBEXT=${PKGDBEXT:-"db.tar.${DBEXT}"}
-}
-
-init_artools_iso(){
-    CHROOTS_ISO="${CHROOTS_DIR}/buildiso"
-
-    ISO_POOL=${ISO_POOL:-"${WORKSPACE_DIR}/iso"}
-
-    prepare_dir "${ISO_POOL}"
-
-    PROFILE='base'
-
-    ISO_VERSION=${ISO_VERSION:-"$(date +%Y%m%d)"}
-
-    INITSYS=${INITSYS:-'openrc'}
-
-    GPG_KEY=${GPG_KEY:-''}
-
-    UPLIMIT=${UPLIMIT:-1000}
-
-    FILE_HOST="download.${DOMAIN}"
-
-    FILE_HOME=${FILE_HOME:-'/srv/iso'}
-
-    FILE_PORT=${FILE_PORT:-65432}
-
-    ACCOUNT=${ACCOUNT:-'naughtyISOuploader'}
-}
-
-load_config(){
-
-    local conf="$1"
-
-    [[ -f "$conf" ]] || return 1
-
-    [[ -r "$conf" ]] && . "$conf"
-
-    init_artools_base
-
-    init_artools_pkg
-
-    init_artools_iso
-
-    return 0
-}
-
-load_user_info(){
-    OWNER=${SUDO_USER:-$USER}
-
-    if [[ -n $SUDO_USER ]]; then
-        eval "USER_HOME=~$SUDO_USER"
-    else
-        USER_HOME=$HOME
-    fi
-
-    USERCONFDIR="${XDG_CONFIG_HOME:-$USER_HOME/.config}"
-    prepare_dir "${USERCONFDIR}"
-
-    USERCACHEDIR="${XDG_CACHE_HOME:-$USER_HOME/.cache}/artools"
-}
-
 # orig_argv=("$0" "$@")
 check_root() {
     local keepenv=$1

lib/iso/chrootcfg.sh

@@ -12,20 +12,44 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-add_svc_rc(){
-    local mnt="$1" name="$2" rlvl="$3"
-    if [[ -f $mnt/etc/init.d/$name ]];then
-        msg2 "Setting %s ..." "$name"
-        chroot $mnt rc-update add $name $rlvl &>/dev/null
-    fi
+add_svc_openrc(){
+    local mnt="$1" names="$2" rlvl="${3:-default}"
+    for svc in $names; do
+        if [[ -f $mnt/etc/init.d/$svc ]];then
+            msg2 "Setting %s ..." "$svc"
+            [[ $svc == "xdm" ]] && set_xdm "$mnt"
+            chroot $mnt rc-update add $svc $rlvl &>/dev/null
+        fi
+    done
 }
 
 add_svc_runit(){
-    local mnt="$1" name="$2"
-    if [[ -d $mnt/etc/runit/sv/$name ]]; then
-        msg2 "Setting %s ..." "$name"
-        chroot $mnt ln -s /etc/runit/sv/$name /etc/runit/runsvdir/default &>/dev/null
-    fi
+    local mnt="$1" names="$2" rlvl="${3:-default}"
+    for svc in $names; do
+        if [[ -d $mnt/etc/runit/sv/$svc ]]; then
+            msg2 "Setting %s ..." "$svc"
+            chroot $mnt ln -s /etc/runit/sv/$svc /etc/runit/runsvdir/$rlvl &>/dev/null
+        fi
+    done
+}
+
+add_svc_s6(){
+    local mnt="$1" names="$2" valid="" rlvl="${3:-default}"
+    for svc in $names; do
+        error=false
+        chroot $mnt s6-rc-db -c /etc/s6/rc/compiled type $svc &> /dev/null || error=true
+        if [ $? == 0 ] && [[ $error == false ]]; then
+            msg2 "Setting %s ..." "$svc"
+            valid=${valid:-}${valid:+' '}${svc}
+        fi
+    done
+    chroot $mnt s6-rc-bundle -c /etc/s6/rc/compiled add $rlvl $valid
+
+    # rebuild s6-linux-init binaries
+    chroot $mnt rm -r /etc/s6/current
+    chroot $mnt s6-linux-init-maker -1 -N -f /etc/s6/skel -G "/usr/bin/agetty -L -8 tty1 115200" -c /etc/s6/current /etc/s6/current
+    chroot $mnt mv /etc/s6/current/bin/init /etc/s6/current/bin/s6-init
+    chroot $mnt cp -a /etc/s6/current/bin /usr
 }
 
 set_xdm(){
@@ -51,42 +75,19 @@ configure_logind(){
 
 configure_services(){
     local mnt="$1"
-    info "Configuring [%s]" "${INITSYS}"
-    case ${INITSYS} in
-        'openrc')
-            for svc in ${SERVICES[@]}; do
-                [[ $svc == "xdm" ]] && set_xdm "$mnt"
-                add_svc_rc "$mnt" "$svc" "default"
-            done
-            for svc in ${SERVICES_LIVE[@]}; do
-                add_svc_rc "$mnt" "$svc" "default"
-            done
-        ;;
-        'runit')
-            for svc in ${SERVICES[@]}; do
-                add_svc_runit "$mnt" "$svc"
-            done
-            for svc in ${SERVICES_LIVE[@]}; do
-                add_svc_runit "$mnt" "$svc"
-            done
-        ;;
-    esac
-    info "Done configuring [%s]" "${INITSYS}"
+    info "Configuring [%s] services" "${INITSYS}"
+    add_svc_${INITSYS} "$mnt" "${SERVICES[*]} ${SERVICES_LIVE[*]}"
+    info "Done configuring [%s] services" "${INITSYS}"
 }
 
 configure_system(){
     local mnt="$1"
-    case ${INITSYS} in
-        'openrc' | 'runit')
-            configure_logind "$mnt" "elogind"
-        ;;
-    esac
+    configure_logind "$mnt" "elogind"
     echo ${HOST_NAME} > $mnt/etc/hostname
 }
 
 write_users_conf(){
     local yaml=$(write_yaml_header)
-    yaml+=$(write_empty_line)
     yaml+=$(write_yaml_map 0 'defaultGroups')
     local IFS=','
     for g in ${ADDGROUPS[@]};do
@@ -108,41 +109,55 @@ write_users_conf(){
     printf '%s' "${yaml}"
 }
 
-write_servicescfg_conf(){
+write_services_conf(){
+    local key1="$1" val1="$2" key2="$3" val2="$4"
     local yaml=$(write_yaml_header)
-    yaml+=$(write_empty_line)
-    case "${INITSYS}" in
-        'runit')
-            yaml+=$(write_yaml_map 0 'svDir' '/etc/runit/sv')
-            yaml+=$(write_yaml_map 0 'runsvDir' '/etc/runit/runsvdir')
-            yaml+=$(write_yaml_map 0 'services')
-            yaml+=$(write_yaml_map 2 'enabled')
-            for svc in ${SERVICES[@]};do
-                yaml+=$(write_yaml_seq_map 4 'name' "$svc")
-                yaml+=$(write_yaml_map 6 'runlevel' 'default')
-            done
-        ;;
-        'openrc')
-            yaml+=$(write_yaml_map 0 'initdDir' '/etc/init.d')
-            yaml+=$(write_yaml_map 0 'runlevelsDir' '/etc/runlevels')
-            yaml+=$(write_yaml_map 0 'services')
-            for svc in ${SERVICES[@]};do
-                yaml+=$(write_yaml_seq_map 2 'name' "$svc")
-                yaml+=$(write_yaml_map 4 'runlevel' 'default')
-            done
-        ;;
-    esac
+    yaml+=$(write_yaml_map 0 "$key1" "$val1")
+    yaml+=$(write_yaml_map 0 "$key2" "$val2")
+    yaml+=$(write_yaml_map 0 'services')
+    for svc in ${SERVICES[@]};do
+        yaml+=$(write_yaml_seq 2 "$svc")
+    done
     yaml+=$(write_empty_line)
     printf '%s' "${yaml}"
 }
 
-write_unpackfs_conf(){
+write_services_openrc_conf(){
+    local conf="$1"/services-openrc.conf
+    write_services_conf 'initdDir' '/etc/init.d' 'runlevelsDir' '/etc/runlevels' > "$conf"
+}
+
+write_services_runit_conf(){
+    local conf="$1"/services-runit.conf
+    write_services_conf 'svDir' '/etc/runit/sv' 'runsvDir' '/etc/runit/runsvdir' > "$conf"
+}
+
+write_services_s6_conf(){
+    local conf="$1"/services-s6.conf
+    write_services_conf 'svDir' '/etc/s6/sv' 'dbDir' '/etc/s6/rc/compiled' > "$conf"
+}
+
+write_postcfg(){
     local yaml=$(write_yaml_header)
+    yaml+=$(write_yaml_map 0 'keyrings')
+    for k in archlinux artix;do
+        yaml+=$(write_yaml_seq 2 "$k")
+    done
     yaml+=$(write_empty_line)
+    printf '%s' "${yaml}"
+}
+
+write_unpackfs() {
+    local yaml=$(write_yaml_header)
     yaml+=$(write_yaml_map 0 'unpack')
-    yaml+=$(write_yaml_seq_map 2 'source' "/run/artix/bootmnt/artix/x86_64/rootfs.sfs")
-    yaml+=$(write_yaml_map 4 'sourcefs' 'squashfs')
-    yaml+=$(write_yaml_map 4 'destination' '')
+#     if ${persist}; then
+#         yaml+=$(write_yaml_seq_map 2 'source' '"/run/artix/bootmnt/LiveOS/rootfs.img"')
+#         yaml+=$(write_yaml_map 4 'sourcefs' '"ext4"')
+#     else
+    yaml+=$(write_yaml_seq_map 2 'source' '"/run/artix/bootmnt/LiveOS/rootfs.img"')
+    yaml+=$(write_yaml_map 4 'sourcefs' '"squashfs"')
+#     fi
+    yaml+=$(write_yaml_map 4 'destination' '""')
     yaml+=$(write_empty_line)
     printf '%s' "${yaml}"
 }
@@ -152,21 +167,60 @@ configure_calamares(){
     if [[ -d "$mods" ]];then
         msg2 "Configuring Calamares"
         write_users_conf > "$mods"/users.conf
-        write_servicescfg_conf > "$mods"/services-"${INITSYS}".conf
-        write_unpackfs_conf > "$mods"/unpackfs.conf
-        sed -e "s|openrc|${INITSYS}|" -i "$mods"/postcfg.conf
-        sed -e "s|services-openrc|services-${INITSYS}|" -i "$1"/etc/calamares/settings.conf
+        write_services_"${INITSYS}"_conf "$mods"
+        write_postcfg > "$mods"/postcfg.conf
+        write_unpackfs > "$mods"/unpackfs.conf
+        sed -e "s|services-openrc|services-${INITSYS}|" \
+            -i "$1"/etc/calamares/settings.conf
     fi
 }
 
-configure_live_image(){
+configure_chroot(){
     local fs="$1"
-    msg "Configuring [livefs]"
+    msg "Configuring [%s]" "${fs##*/}"
     configure_hosts "$fs"
     configure_system "$fs"
     configure_services "$fs"
     configure_calamares "$fs"
     [[ ! -d "$fs/etc/artools" ]] && mkdir -p "$fs/etc/artools"
+    msg2 "Writing live.conf"
     write_live_session_conf > "$fs/etc/artools/live.conf"
-    msg "Done configuring [livefs]"
+    msg "Done configuring [%s]" "${fs##*/}"
+}
+
+clean_up_chroot(){
+    local path mnt="$1"
+    msg2 "Cleaning [%s]" "${mnt##*/}"
+
+    path=$mnt/boot
+    if [[ -d "$path" ]]; then
+        find "$path" -name 'initramfs*.img' -delete &> /dev/null
+    fi
+    path=$mnt/var/lib/pacman/sync
+    if [[ -d $path ]];then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/cache/pacman/pkg
+    if [[ -d $path ]]; then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/log
+    if [[ -d $path ]]; then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/tmp
+    if [[ -d $path ]];then
+        find "$path" -mindepth 1 -delete &> /dev/null
+    fi
+    path=$mnt/tmp
+    if [[ -d $path ]];then
+        find "$path" -mindepth 1 -delete &> /dev/null
+    fi
+    find "$mnt" -name *.pacnew -name *.pacsave -name *.pacorig -delete
+    if [[ -f "$mnt/boot/grub/grub.cfg" ]]; then
+        rm $mnt/boot/grub/grub.cfg
+    fi
+    if [[ -f "$mnt/etc/machine-id" ]]; then
+        rm $mnt/etc/machine-id
+    fi
 }

lib/iso/grub.sh

@@ -12,42 +12,8 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-prepare_initcpio(){
-    msg2 "Copying initcpio ..."
-    local dest="$1"
-    cp /etc/initcpio/hooks/artix* $dest/etc/initcpio/hooks
-    cp /etc/initcpio/install/artix* $dest/etc/initcpio/install
-    cp /etc/initcpio/artix_shutdown $dest/etc/initcpio
-}
-
-prepare_initramfs(){
-    local mnt="$1"
-    cp ${DATADIR}/mkinitcpio.conf $mnt/etc/mkinitcpio-artix.conf
-
-    if [[ "${PROFILE}" != 'base' ]];then
-        sed -e 's/artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs //' -i $mnt/etc/mkinitcpio-artix.conf
-    fi
-
-    if [[ -n ${GPG_KEY} ]]; then
-        su ${OWNER} -c "gpg --export ${GPG_KEY} >/tmp/GPG_KEY"
-        exec 17<>/tmp/GPG_KEY
-    fi
-    local _kernel=$(cat $mnt/usr/lib/modules/*/version)
-    ARTIX_GNUPG_FD=${GPG_KEY:+17} artools-chroot $mnt \
-        /usr/bin/mkinitcpio -k ${_kernel} \
-        -c /etc/mkinitcpio-artix.conf \
-        -g /boot/initramfs.img
-
-    if [[ -n ${GPG_KEY} ]]; then
-        exec 17<&-
-    fi
-    if [[ -f /tmp/GPG_KEY ]]; then
-        rm /tmp/GPG_KEY
-    fi
-}
-
 prepare_boot_extras(){
-    local src="$1" dest="$2"
+    local src="$1" dest=${iso_root}/boot
 
     for u in intel amd;do
         cp $src/boot/$u-ucode.img $dest/$u-ucode.img
@@ -58,19 +24,121 @@ prepare_boot_extras(){
     cp $src/usr/share/licenses/common/GPL2/license.txt $dest/memtest.COPYING
 }
 
+##################dracut##################
+
+prepare_initramfs_dracut(){
+    local mnt="$1"
+    local kver=$(<"$mnt"/usr/src/linux/version)
+
+    printf "%s\n" 'add_dracutmodules+=" dmsquash-live"' > "$mnt"/etc/dracut.conf.d/50-live.conf
+
+    msg "Starting build: %s" "${kver}"
+    artools-chroot "$mnt" dracut -fqM /boot/initramfs.img "$kver"
+    msg "Image generation successful"
+
+    cp "$mnt"/boot/initramfs.img "${iso_root}"/boot/initramfs-"${ARCH}".img
+
+    prepare_boot_extras "$mnt"
+}
+
+configure_grub_dracut(){
+    msg "Configuring grub kernel options ..."
+    local kopts=(
+        "root=live:LABEL=${iso_label}"
+        'rd.live.squashimg=rootfs.img'
+        'rd.live.image'
+        'rootflags=auto'
+    )
+    [[ "${PROFILE}" != 'base' ]] && kopts+=("rd.live.join=livefs.img")
+
+    local ro_opts=()
+    local rw_opts=()
+#         'rd.writable.fsimg=1'
+
+    sed -e "s|@kopts@|${kopts[*]}|" \
+        -e "s|@ro_opts@|${ro_opts[*]}|" \
+        -e "s|@rw_opts@|${rw_opts[*]}|" \
+        -i ${iso_root}/boot/grub/kernels.cfg
+}
+
+#############################################
+
+write_mkinitcpio_conf() {
+    msg2 "Writing mkinitcpio.conf ..."
+    local conf="$1/etc/mkinitcpio-artix.conf"
+    printf "%s\n" 'MODULES=(loop dm-snapshot)' > $conf
+    printf "%s\n" 'COMPRESSION="xz"' >> $conf
+    if [[ "${PROFILE}" == 'base' ]];then
+        printf "%s\n" 'HOOKS=(base udev artix_shutdown artix artix_loop_mnt
+                            artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs
+                            artix_kms modconf block filesystems keyboard keymap)' >> $conf
+    else
+        printf "%s\n" 'HOOKS=(base udev artix_shutdown artix artix_loop_mnt
+                            artix_kms modconf block filesystems keyboard keymap)' >> $conf
+    fi
+}
+
+prepare_initcpio(){
+    msg2 "Copying initcpio ..."
+    local dest="$1"
+    cp /etc/initcpio/hooks/artix* $dest/etc/initcpio/hooks
+    cp /etc/initcpio/install/artix* $dest/etc/initcpio/install
+    cp /etc/initcpio/artix_shutdown $dest/etc/initcpio
+}
+
+prepare_initramfs(){
+    local mnt="$1"
+
+    prepare_initcpio "$mnt"
+
+    write_mkinitcpio_conf "$mnt"
+
+    if [[ -n ${GPG_KEY} ]]; then
+        su ${OWNER} -c "gpg --export ${GPG_KEY} >/tmp/GPG_KEY"
+        exec 17<>/tmp/GPG_KEY
+    fi
+    local _kernel=$(<"$mnt"/usr/src/linux/version)
+    ARTIX_GNUPG_FD=${GPG_KEY:+17} artools-chroot "$mnt" \
+        /usr/bin/mkinitcpio -k ${_kernel} \
+        -c /etc/mkinitcpio-artix.conf \
+        -g /boot/initramfs.img
+
+    if [[ -n ${GPG_KEY} ]]; then
+        exec 17<&-
+    fi
+    if [[ -f /tmp/GPG_KEY ]]; then
+        rm /tmp/GPG_KEY
+    fi
+
+    cp $mnt/boot/initramfs.img ${iso_root}/boot/initramfs-${ARCH}.img
+    prepare_boot_extras "$mnt"
+}
+
 configure_grub(){
-    local conf="$1/boot/grub/kernels.cfg"
-    sed -e "s|@iso_label@|${iso_label}|" -i $conf
+    msg "Configuring grub kernel options ..."
+    local ro_opts=()
+    local rw_opts=()
+    local kopts=("label=${iso_label}")
+
+    [[ "${PROFILE}" != 'base' ]] && kopts+=('overlay=livefs')
+
+    sed -e "s|@kopts@|${kopts[*]}|" \
+        -e "s|@ro_opts@|${ro_opts[*]}|" \
+        -e "s|@rw_opts@|${rw_opts[*]}|" \
+        -i ${iso_root}/boot/grub/kernels.cfg
 }
 
 prepare_grub(){
     local platform=i386-pc img='core.img' prefix=/boot/grub
-    local lib=$1/usr/lib/grub theme=$2/usr/share/grub
-    local grub=$3/boot/grub efi=$3/efi/boot
+    local lib="$1"/usr/lib/grub
+    local theme="$1"/usr/share/grub
+    local livecfg="$2"/usr/share/grub
+    local grub=${iso_root}/boot/grub efi=${iso_root}/efi/boot
+
 
     prepare_dir ${grub}/${platform}
 
-    cp ${theme}/cfg/*.cfg ${grub}
+    cp ${livecfg}/cfg/*.cfg ${grub}
 
     cp ${lib}/${platform}/* ${grub}/${platform}
 
@@ -93,8 +161,9 @@ prepare_grub(){
     grub-mkimage -d ${grub}/${platform} -o ${efi}/${img} -O ${platform} -p ${prefix} iso9660
 
     prepare_dir ${grub}/themes
-    cp -r ${theme}/themes/artix ${grub}/themes/
-    cp -r ${theme}/{locales,tz} ${grub}
+
+    cp -r ${theme}/themes/artix ${grub}/themes
+    cp -r ${livecfg}/{locales,tz} ${grub}
 
     if [[ -f /usr/share/grub/unicode.pf2 ]];then
         msg2 "Copying %s ..." "unicode.pf2"
@@ -104,7 +173,7 @@ prepare_grub(){
         grub-mkfont -o ${grub}/unicode.pf2 /usr/share/fonts/misc/unifont.bdf
     fi
 
-    local size=4M mnt="${mnt_dir}/efiboot" efi_img="$3/efi.img"
+    local size=4M mnt="${mnt_dir}/efiboot" efi_img="${iso_root}/boot/efi.img"
     msg2 "Creating fat image of %s ..." "${size}"
     truncate -s ${size} "${efi_img}"
     mkfs.fat -n ARTIX_EFI "${efi_img}" &>/dev/null

lib/iso/iso.sh

@@ -13,100 +13,119 @@
 # GNU General Public License for more details.
 
 make_sig () {
-    local idir="$1" file="$2"
+    local file="$1"
     msg2 "Creating signature file..."
-    cd "$idir"
-    chown "${OWNER}:$(id --group ${OWNER})" "$idir"
-    su ${OWNER} -c "gpg --detach-sign --default-key ${GPG_KEY} $file.sfs"
-    chown -R root "$idir"
+    cd ${iso_root}${live_dir}
+    chown "${OWNER}:$(id --group ${OWNER})" "${iso_root}${live_dir}"
+    su ${OWNER} -c "gpg --detach-sign --default-key ${GPG_KEY} $file"
+    chown -R root "${iso_root}${live_dir}"
     cd ${OLDPWD}
 }
 
 make_checksum(){
-    local idir="$1" file="$2"
-    msg2 "Creating sha512sum ..."
-    cd $idir
-    sha512sum $file.sfs > $file.sha512
+    local file="$1"
+    msg2 "Creating md5sum ..."
+    cd ${iso_root}${live_dir}
+    md5sum $file > $file.md5
     cd ${OLDPWD}
 }
 
+make_ext_img(){
+    local src="$1"
+    local size=32G
+    local mnt="${mnt_dir}/${src##*/}"
+    mkdir -p ${work_dir}/embed${live_dir}
+    local extimg=${work_dir}/embed${live_dir}/${src##*/}.img
+
+    msg2 "Creating ext4 image of %s ..." "${size}"
+    truncate -s ${size} "${extimg}"
+    local ext4_args=()
+    ext4_args+=(-O ^has_journal,^resize_inode -E lazy_itable_init=0 -m 0)
+    mkfs.ext4 ${ext4_args[@]} -F "${extimg}" &>/dev/null
+    tune2fs -c 0 -i 0 "${extimg}" &> /dev/null
+    mount_img "${extimg}" "${mnt}"
+    msg2 "Copying %s ..." "${src}/"
+    cp -aT "${src}/" "${mnt}/"
+    umount_img "${mnt}"
+}
+
+has_changed(){
+    local src="$1" dest="$2"
+    if [[ -f "${dest}" ]]; then
+        local has_changes=$(find ${src} -newer ${dest})
+        if [[ -n "${has_changes}" ]]; then
+            msg2 "Possible changes for %s ..." "${src}"
+            msg2 "%s" "${has_changes}"
+            msg2 "SquashFS image %s is not up to date, rebuilding..." "${dest}"
+            rm "${dest}"
+        else
+            msg2 "SquashFS image %s is up to date, skipping." "${dest}"
+            return 1
+        fi
+    fi
+}
+
 # $1: image path
 make_sfs() {
-    local src="$1"
-    if [[ ! -e "${src}" ]]; then
-        error "The path %s does not exist" "${src}"
+    local sfs_in="$1"
+    if [[ ! -e "${sfs_in}" ]]; then
+        error "The path %s does not exist" "${sfs_in}"
         retrun 1
     fi
-    local timer=$(get_timer) dest=${iso_root}/artix/${ARCH}
-    local name=${1##*/}
-    local sfs="${dest}/${name}.sfs"
-    mkdir -p ${dest}
-    msg "Generating SquashFS image for %s" "${src}"
-    if [[ -f "${sfs}" ]]; then
-        local has_changed_dir=$(find ${src} -newer ${sfs})
-        msg2 "Possible changes for %s ..." "${src}"  >> /tmp/buildiso.debug
-        msg2 "%s" "${has_changed_dir}" >> /tmp/buildiso.debug
-        if [[ -n "${has_changed_dir}" ]]; then
-            msg2 "SquashFS image %s is not up to date, rebuilding..." "${sfs}"
-            rm "${sfs}"
+
+    mkdir -p ${iso_root}${live_dir}
+
+    local img_name=${sfs_in##*/}.img
+    local img_file=${sfs_in}.img
+
+    local sfs_out="${iso_root}${live_dir}/${img_name}"
+
+    if has_changed "${sfs_in}" "${sfs_out}"; then
+
+        msg "Generating SquashFS image for %s" "${sfs_in}"
+
+        local mksfs_args=()
+
+        if ${persist};then
+            make_ext_img "${sfs_in}"
+            mksfs_args+=("${work_dir}/embed")
         else
-            msg2 "SquashFS image %s is up to date, skipping." "${sfs}"
-            return
+            mksfs_args+=("${sfs_in}")
         fi
+
+        mksfs_args+=("${sfs_out}")
+
+        mksfs_args+=(-comp xz -b 256K -Xbcj x86 -noappend)
+
+        mksquashfs "${mksfs_args[@]}"
+
+        if ! ${use_dracut}; then
+            make_checksum "${img_name}"
+            if [[ -n ${GPG_KEY} ]];then
+                make_sig "${img_name}"
+            fi
+        fi
+        ${persist} && rm -r "${work_dir}/embed"
     fi
+}
 
-    if ${persist};then
-        local size=32G
-        local mnt="${mnt_dir}/${name}"
-        msg2 "Creating ext4 image of %s ..." "${size}"
-        truncate -s ${size} "${src}.img"
-        local ext4_args=()
-        ext4_args+=(-O ^has_journal,^resize_inode -E lazy_itable_init=0 -m 0)
-        mkfs.ext4 ${ext4_args[@]} -F "${src}.img" &>/dev/null
-        tune2fs -c 0 -i 0 "${src}.img" &> /dev/null
-        mount_img "${work_dir}/${name}.img" "${mnt}"
-        msg2 "Copying %s ..." "${src}/"
-        cp -aT "${src}/" "${mnt}/"
-        umount_img "${mnt}"
-
-    fi
-
-    msg2 "Creating SquashFS image, this may take some time..."
-    local mksfs_args=()
-    if ${persist};then
-        mksfs_args+=(${work_dir}/${name}.img)
-    else
-        mksfs_args+=(${src})
-    fi
-
-    mksfs_args+=(${sfs} -noappend)
-
-    local highcomp="-b 256K -Xbcj x86" comp='xz'
-
-    mksfs_args+=(-comp ${comp} ${highcomp})
-
-    mksquashfs "${mksfs_args[@]}"
-
-    make_checksum "${dest}" "${name}"
-    ${persist} && rm "${src}.img"
-
-    if [[ -n ${GPG_KEY} ]];then
-        make_sig "${dest}" "${name}"
-    fi
-
-    show_elapsed_time "${FUNCNAME}" "${timer_start}"
+get_disturl(){
+    . /usr/lib/os-release
+    echo "${HOME_URL}"
 }
 
 assemble_iso(){
     msg "Creating ISO image..."
     local mod_date=$(date -u +%Y-%m-%d-%H-%M-%S-00  | sed -e s/-//g)
+    local appid="$(get_osname) Live/Rescue CD"
+    local publisher="$(get_osname) <$(get_disturl)>"
 
     xorriso -as mkisofs \
         --modification-date=${mod_date} \
         --protective-msdos-label \
         -volid "${iso_label}" \
-        -appid "$(get_osname) Live/Rescue CD" \
-        -publisher "$(get_osname) <$(get_disturl)>" \
+        -appid "${appid}" \
+        -publisher "${publisher}" \
         -preparer "Prepared by artools/${0##*/}" \
         -r -graft-points -no-pad \
         --sort-weight 0 / \
@@ -117,10 +136,11 @@ assemble_iso(){
         -c boot.catalog \
         -no-emul-boot -boot-load-size 4 -boot-info-table --grub2-boot-info \
         -eltorito-alt-boot \
-        -append_partition 2 0xef ${iso_root}/efi.img \
+        -append_partition 2 0xef ${iso_root}/boot/efi.img \
         -e --interval:appended_partition_2:all:: -iso_mbr_part_type 0x00 \
         -no-emul-boot \
         -iso-level 3 \
         -o ${iso_dir}/${iso_file} \
         ${iso_root}/
 }
+

lib/iso/mount.sh

@@ -37,19 +37,22 @@ track_fs() {
     mount "$@" && FS_ACTIVE_MOUNTS=("$5" "${FS_ACTIVE_MOUNTS[@]}")
 }
 
-mount_overlay(){
+mount_overlayfs(){
     FS_ACTIVE_MOUNTS=()
     local lower= upper="$1" work="$2"
     mkdir -p "${mnt_dir}/work"
     mkdir -p "$upper"
     case $upper in
         */livefs) lower="$work/rootfs" ;;
-        */bootfs) lower="$work/livefs":"$work/rootfs" ;;
+        */bootfs)
+            lower="$work/rootfs"
+            [[ -d "$work/livefs" ]] && lower="$work/livefs":"$work/rootfs"
+        ;;
     esac
     track_fs -t overlay overlay -olowerdir="$lower",upperdir="$upper",workdir="${mnt_dir}/work" "$upper"
 }
 
-umount_overlay(){
+umount_overlayfs(){
     if [[ -n ${FS_ACTIVE_MOUNTS[@]} ]];then
         info "overlayfs umount: [%s]" "${FS_ACTIVE_MOUNTS[@]}"
         umount "${FS_ACTIVE_MOUNTS[@]}"

lib/iso/profile.sh

@@ -12,21 +12,6 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-init_profile(){
-    local profdir="$1" prof="$2"
-
-    ROOT_LIST="$profdir/base/Packages-Root"
-    ROOT_OVERLAY="$profdir/base/root-overlay"
-    LIVE_LIST="$profdir/base/Packages-Live"
-    LIVE_OVERLAY="$profdir/base/live-overlay"
-
-    [[ -f "$profdir/$prof/Packages-Root" ]] && ROOT_LIST="$profdir/$prof/Packages-Root"
-    [[ -d "$profdir/$prof/root-overlay" ]] && ROOT_OVERLAY="$profdir/$prof/root-overlay"
-
-    [[ -f "$profdir/$prof/Packages-Live" ]] && LIVE_LIST="$profdir/$prof/Packages-Live"
-    [[ -d "$profdir/$prof/live-overlay" ]] && LIVE_OVERLAY="$profdir/$prof/live-overlay"
-}
-
 show_profile(){
     msg2 "iso_file: %s" "${iso_file}"
     msg2 "AUTOLOGIN: %s" "${AUTOLOGIN}"
@@ -39,15 +24,18 @@ show_profile(){
 }
 
 load_profile(){
-    local prof="$1"
-    local profdir="${DATADIR}/iso-profiles"
-    [[ -d ${WORKSPACE_DIR}/iso-profiles ]] && profdir=${WORKSPACE_DIR}/iso-profiles
+    local profile_dir="${DATADIR}/iso-profiles"
+    [[ -d ${WORKSPACE_DIR}/iso-profiles ]] && profile_dir=${WORKSPACE_DIR}/iso-profiles
 
-    init_profile "$profdir" "$prof"
+    ROOT_LIST="$profile_dir/${PROFILE}/Packages-Root"
+    ROOT_OVERLAY="$profile_dir/${PROFILE}/root-overlay"
 
-    [[ -f $profdir/$prof/profile.conf ]] || return 1
+    [[ -f "$profile_dir/${PROFILE}/Packages-Live" ]] && LIVE_LIST="$profile_dir/${PROFILE}/Packages-Live"
+    [[ -d "$profile_dir/${PROFILE}/live-overlay" ]] && LIVE_OVERLAY="$profile_dir/${PROFILE}/live-overlay"
 
-    [[ -r $profdir/$prof/profile.conf ]] && . $profdir/$prof/profile.conf
+    [[ -f $profile_dir/${PROFILE}/profile.conf ]] || return 1
+
+    [[ -r $profile_dir/${PROFILE}/profile.conf ]] && . $profile_dir/${PROFILE}/profile.conf
 
     DISPLAYMANAGER=${DISPLAYMANAGER:-'none'}
 
@@ -63,25 +51,22 @@ load_profile(){
     ADDGROUPS=${ADDGROUPS:-"video,power,optical,network,lp,scanner,wheel,users,log"}
 
     if [[ -z ${SERVICES[@]} ]];then
-        SERVICES=('acpid' 'bluetooth' 'cronie' 'cupsd' 'syslog-ng' 'NetworkManager')
+        SERVICES=('acpid' 'bluetoothd' 'cronie' 'cupsd' 'syslog-ng' 'connmand')
     fi
 
     if [[ ${DISPLAYMANAGER} != "none" ]];then
         case "${INITSYS}" in
             'openrc') SERVICES+=('xdm') ;;
-            'runit') SERVICES+=("${DISPLAYMANAGER}") ;;
+            'runit'|'s6') SERVICES+=("${DISPLAYMANAGER}") ;;
         esac
     fi
 
-    if [[ -z ${SERVICES_LIVE[@]} ]];then
-        SERVICES_LIVE=('artix-live' 'pacman-init')
-    fi
+    SERVICES_LIVE=('artix-live' 'pacman-init')
 
     return 0
 }
 
 write_live_session_conf(){
-    msg2 "Writing live.conf"
     local conf=''
     conf+=$(printf '%s\n' '# live session configuration')
     conf+=$(printf "\nAUTOLOGIN=%s\n" "${AUTOLOGIN}")
@@ -97,7 +82,7 @@ load_pkgs(){
 
     local _init="s|@$init||g"
     case "$init" in
-        'openrc') _init_rm1="s|@runit.*||g"; _init_rm2="s|@s6*||g" ;;
+        'openrc') _init_rm1="s|@runit.*||g"; _init_rm2="s|@s6.*||g" ;;
         's6') _init_rm1="s|@runit.*||g"; _init_rm2="s|@openrc.*||g" ;;
         'runit') _init_rm1="s|@s6.*||g"; _init_rm2="s|@openrc.*||g" ;;
     esac

lib/iso/util.sh

@@ -13,16 +13,13 @@
 # GNU General Public License for more details.
 
 error_function() {
-    if [[ -p $logpipe ]]; then
-        rm "$logpipe"
-    fi
     local func="$1"
     # first exit all subshells, then print the error
     if (( ! BASH_SUBSHELL )); then
         error "A failure occurred in %s()." "$func"
         plain "Aborting..."
     fi
-    umount_overlay
+    umount_overlayfs
     umount_img
     exit 2
 }
@@ -44,7 +41,7 @@ run_safe() {
 trap_exit() {
     local sig=$1; shift
     error "$@"
-    umount_overlay
+    umount_overlayfs
     trap -- "$sig"
     kill "-$sig" "$$"
 }
@@ -57,27 +54,6 @@ prepare_traps(){
 #     trap 'trap_exit USR1 "$(gettext "An unknown error has occurred. Exiting...")"' ERR
 }
 
-# Build ISO
-make_iso() {
-    msg "Start [Build ISO]"
-    touch "${iso_root}/.artix"
-    for sfs_dir in $(find "${work_dir}" -maxdepth 1 -type d); do
-        if [[ "${sfs_dir}" != "${work_dir}" ]]; then
-            make_sfs "${sfs_dir}"
-        fi
-    done
-
-    msg "Making bootable image"
-    # Sanity checks
-    [[ ! -d "${iso_root}" ]] && return 1
-    if [[ -f "${iso_dir}/${iso_file}" ]]; then
-        msg2 "Removing existing bootable image..."
-        rm -rf "${iso_dir}/${iso_file}"
-    fi
-    assemble_iso
-    msg "Done [Build ISO]"
-}
-
 copy_overlay(){
     local src="$1" dest="$2"
     if [[ -e "$src" ]];then
@@ -86,43 +62,6 @@ copy_overlay(){
     fi
 }
 
-clean_up_image(){
-    local path mnt="$1"
-    msg2 "Cleaning [%s]" "${mnt##*/}"
-
-    path=$mnt/boot
-    if [[ -d "$path" ]]; then
-        find "$path" -name 'initramfs*.img' -delete &> /dev/null
-    fi
-    path=$mnt/var/lib/pacman/sync
-    if [[ -d $path ]];then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/cache/pacman/pkg
-    if [[ -d $path ]]; then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/log
-    if [[ -d $path ]]; then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/tmp
-    if [[ -d $path ]];then
-        find "$path" -mindepth 1 -delete &> /dev/null
-    fi
-    path=$mnt/tmp
-    if [[ -d $path ]];then
-        find "$path" -mindepth 1 -delete &> /dev/null
-    fi
-    find "$mnt" -name *.pacnew -name *.pacsave -name *.pacorig -delete
-    if [[ -f "$mnt/boot/grub/grub.cfg" ]]; then
-        rm $mnt/boot/grub/grub.cfg
-    fi
-    if [[ -f "$mnt/etc/machine-id" ]]; then
-        rm $mnt/etc/machine-id
-    fi
-}
-
 make_rootfs() {
     if [[ ! -e ${work_dir}/rootfs.lock ]]; then
         msg "Prepare [Base installation] (rootfs)"
@@ -134,7 +73,9 @@ make_rootfs() {
 
         copy_overlay "${ROOT_OVERLAY}" "${rootfs}"
 
-        clean_up_image "${rootfs}"
+        [[ -z ${LIVE_LIST} ]] && configure_chroot "${rootfs}"
+
+        clean_up_chroot "${rootfs}"
 
         : > ${work_dir}/rootfs.lock
 
@@ -149,17 +90,17 @@ make_livefs() {
 
         prepare_dir "${livefs}"
 
-        mount_overlay "${livefs}" "${work_dir}"
+        mount_overlayfs "${livefs}" "${work_dir}"
 
         basestrap "${basestrap_args[@]}" "${livefs}" "${packages[@]}"
 
         copy_overlay "${LIVE_OVERLAY}" "${livefs}"
 
-        configure_live_image "${livefs}"
+        configure_chroot "${livefs}"
 
-        umount_overlay
+        umount_overlayfs
 
-        clean_up_image "${livefs}"
+        clean_up_chroot "${livefs}"
 
         : > ${work_dir}/livefs.lock
 
@@ -170,23 +111,22 @@ make_livefs() {
 make_bootfs() {
     if [[ ! -e ${work_dir}/bootfs.lock ]]; then
         msg "Prepare [/iso/boot]"
-        local boot="${iso_root}/boot"
 
-        prepare_dir "${boot}"
+        prepare_dir "${iso_root}/boot"
 
-        cp ${work_dir}/rootfs/boot/vmlinuz* ${boot}/vmlinuz-${ARCH}
+        cp ${work_dir}/rootfs/boot/vmlinuz* ${iso_root}/boot/vmlinuz-${ARCH}
 
         local bootfs="${work_dir}/bootfs"
 
-        mount_overlay "${bootfs}" "${work_dir}"
+        mount_overlayfs "${bootfs}" "${work_dir}"
 
-        prepare_initcpio "${bootfs}"
-        prepare_initramfs "${bootfs}"
+        if ${use_dracut}; then
+            prepare_initramfs_dracut "${bootfs}"
+        else
+            prepare_initramfs "${bootfs}"
+        fi
 
-        cp ${bootfs}/boot/initramfs.img ${boot}/initramfs-${ARCH}.img
-        prepare_boot_extras "${bootfs}" "${boot}"
-
-        umount_overlay
+        umount_overlayfs
 
         rm -R ${bootfs}
         : > ${work_dir}/bootfs.lock
@@ -198,32 +138,18 @@ make_grub(){
     if [[ ! -e ${work_dir}/grub.lock ]]; then
         msg "Prepare [/iso/boot/grub]"
 
-        prepare_grub "${work_dir}/rootfs" "${work_dir}/livefs" "${iso_root}"
+        local layer=${work_dir}/rootfs
+        [[ -n ${LIVE_LIST} ]] && layer=${work_dir}/livefs
 
-        configure_grub "${iso_root}"
+        prepare_grub "${work_dir}/rootfs" "$layer"
+
+        if ${use_dracut}; then
+            configure_grub_dracut
+        else
+            configure_grub
+        fi
 
         : > ${work_dir}/grub.lock
         msg "Done [/iso/boot/grub]"
     fi
 }
-
-compress_images(){
-    local timer=$(get_timer)
-    run_safe "make_iso"
-    chown -R "${OWNER}:$(id --group ${OWNER})" "${iso_dir}"
-    show_elapsed_time "${FUNCNAME}" "${timer}"
-}
-
-prepare_images(){
-    local timer=$(get_timer)
-    load_pkgs "${ROOT_LIST}" "${INITSYS}"
-    run_safe "make_rootfs"
-    if [[ -f ${LIVE_LIST} ]]; then
-        load_pkgs "${LIVE_LIST}" "${INITSYS}"
-        run_safe "make_livefs"
-    fi
-    run_safe "make_bootfs"
-    run_safe "make_grub"
-
-    show_elapsed_time "${FUNCNAME}" "${timer}"
-}

lib/pkg/git.sh

@@ -0,0 +1,185 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-19 artoo@artixlinux.org
+# Copyright (C) 2018 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+get_local_head(){
+    echo $(git log --pretty=%H ...refs/heads/master^ | head -n 1)
+}
+
+get_remote_head(){
+    echo $(git ls-remote origin -h refs/heads/master | cut -f1)
+}
+
+clone_tree(){
+    local timer=$(get_timer) url="$1" tree="$2" os="${3:-$(get_osname)}"
+
+    msg "Cloning %s (%s) ..." "$tree" "$os"
+
+    git clone $url/$tree.git
+    show_elapsed_time "${FUNCNAME}" "${timer}"
+}
+
+has_changes(){
+    local head_l="$1" head_r="$2"
+    if [[ "$head_l" == "$head_r" ]]; then
+        msg2 "remote changes: no"
+        return 1
+    else
+        msg2 "remote changes: yes"
+        return 0
+    fi
+}
+
+pull_tree(){
+    local tree="$1" local_head="$2" os="${3:-$(get_osname)}"
+    local remote_head=$(get_remote_head)
+
+    msg "Checking (%s) (%s)" "${tree}" "$os"
+    if has_changes "${local_head}" "${remote_head}";then
+        git pull origin master
+    fi
+}
+
+push_tree(){
+    local tree="$1"
+    msg "Update (%s)" "${tree}"
+    git push origin master
+}
+
+write_jenkinsfile(){
+    local pkg="$1"
+    local jenkins=$pkg/Jenkinsfile
+
+    echo "@Library('artix-ci') import org.artixlinux.RepoPackage" > $jenkins
+    echo '' >> $jenkins
+    echo 'PackagePipeline(new RepoPackage(this))' >> $jenkins
+    echo '' >> $jenkins
+
+    git add $jenkins
+}
+
+write_agentyaml(){
+    local pkg="$1"
+    local agent=$pkg/.artixlinux/agent.yaml label='master'
+    [[ -d $pkg/.artixlinux ]] || mkdir $pkg/.artixlinux
+
+    echo '%YAML 1.2' > $agent
+    echo '---' >> $agent
+    echo '' >> $agent
+    echo "label: $label" >> $agent
+    echo '' >> $agent
+
+    git add $agent
+}
+
+commit_jenkins_files(){
+    local pkg="$1"
+
+    write_jenkinsfile "$pkg"
+    write_agentyaml "$pkg"
+
+    git commit -m "initial commit"
+}
+
+config_tree(){
+    local tree="$1"
+    cd $tree
+        git config --bool pull.rebase true
+        git config commit.gpgsign true
+        if [[ -n "${GPGKEY}" ]];then
+            git config user.signingkey "${GPGKEY}"
+        else
+            warning "No GPGKEY configured in makepkg.conf!"
+        fi
+    cd ..
+}
+
+# write_gitignore() {
+#     local pkg="$1"
+#     local gitignore=$pkg/.gitignore
+#     echo '# ---> ArchLinuxPackages' > $gitignore
+#     echo '*.tar' >> $gitignore
+#     echo '*.tar.*' >> $gitignore
+#     echo '*.jar' >> $gitignore
+#     echo '*.exe' >> $gitignore
+#     echo '*.msi' >> $gitignore
+#     echo '*.zip' >> $gitignore
+#     echo '*.tgz' >> $gitignore
+#     echo '*.log' >> $gitignore
+#     echo '*.log.*' >> $gitignore
+#     echo '*.sig' >> $gitignore
+#     echo '' >> $gitignore
+#     echo 'pkg/' >> $gitignore
+#     echo 'src/' >> $gitignore
+#     echo '' >> $gitignore
+#     echo '# ---> Archives' >> $gitignore
+#     echo '*.7z' >> $gitignore
+#     echo '*.rar' >> $gitignore
+#     echo '*.gz' >> $gitignore
+#     echo '*.bzip' >> $gitignore
+#     echo '*.bz2' >> $gitignore
+#     echo '*.xz' >> $gitignore
+#     echo '*.lzma' >> $gitignore
+#     echo '*.cab' >> $gitignore
+#     echo '' >> $gitignore
+#     echo '# ---> systemd' >> $gitignore
+#     echo '*.service' >> $gitignore
+#     echo '*.socket' >> $gitignore
+#     echo '*.timer' >> $gitignore
+#     echo '' >> $gitignore
+#     echo '# ---> snap' >> $gitignore
+#     echo '*.snap' >> $gitignore
+#     echo '' >> $gitignore
+#
+#     git add $gitignore
+# }
+#
+# write_readme(){
+#     local pkg="$1"
+#     local readme=$pkg/README.md
+#
+#     echo "# $pkg" > $readme
+#     echo '' >> $readme
+#
+#     git add $readme
+# }
+#
+# subrepo_new2(){
+#     local group="${1:-$GROUP}" team="${2:-$TEAM}"
+#     local dest=${TREE_DIR_ARTIX}/$group/${PACKAGE}/trunk
+#
+#     cd ${TREE_DIR_ARTIX}/$group
+#
+#     local org=$(get_pkg_org "${PACKAGE}")
+#
+#     prepare_dir "$dest"
+#
+#     subrepo_init "${PACKAGE}" "$org"
+#
+#     commit_jenkins_files2 "${PACKAGE}"
+#
+#     subrepo_push "${PACKAGE}"
+#
+#     add_repo_to_team "${PACKAGE}" "$org" "$team"
+# }
+#
+# commit_jenkins_files2(){
+#     local pkg="$1"
+#
+#     write_jenkinsfile "$pkg"
+#     write_agentyaml "$pkg"
+#     write_readme "$pkg"
+#     write_gitignore "$pkg"
+#
+#     git commit -m "initial commit"
+# }

lib/pkg/gitea.sh

@@ -12,7 +12,7 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-create_repo(){
+create_repo() {
     local pkg="$1" org="$2"
     local gitname=$(get_compliant_name "$pkg")
     local json="{ \"auto_init\": true, \"name\":\"$gitname\", \"gitignores\":\"ArchLinuxPackages\", \"readme\": \"Default\" }"
@@ -27,36 +27,31 @@ create_repo(){
     echo
 }
 
-delete_repo(){
-    local pkg="$1" org="$2"
-    local gitname=$(get_compliant_name "$pkg")
-
-    msg2 "Delete package repo [%s] in org (%s)" "${pkg}" "${org}"
-
-    curl -s -X DELETE "${GIT_URL}/api/v1/repos/$org/$gitname?access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json"
-}
-
-load_team_id(){
-    local org="$1" team="$2" id=0
-
-    local ids=($(curl -s -X GET "${GIT_URL}/api/v1/orgs/$org/teams?access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json" | jshon -a -e id))
-
-    case $team in
-        packages) id="${ids[2]}" ;;
-        community) id="${ids[1]}" ;;
-    esac
-
+get_team_id() {
+    local org="$1" team="$2"
+    local id=$(curl -s -X GET "${GIT_URL}/api/v1/orgs/$org/teams/search?q=$team&access_token=${GIT_TOKEN}" \
+        -H  "accept: application/json" | jq '.data[] .id')
     echo $id
 }
 
-add_repo_to_team(){
+add_repo_to_team() {
     local pkg="$1" org="$2" team="$3"
-    local id=$(load_team_id "$org" "$team")
+    local id=$(get_team_id "$org" "$team")
+    local gitname=$(get_compliant_name "$pkg")
 
-    msg2 "Adding package repo [%s] to team (%s)" "$pkg" "$team"
+    msg2 "Adding package repo [%s] to team (%s)" "$gitname" "$team"
 
-    curl -s -X PUT "${GIT_URL}/api/v1/teams/$id/repos/$org/$pkg?access_token=${GIT_TOKEN}" \
+    curl -s -X PUT "${GIT_URL}/api/v1/teams/$id/repos/$org/$gitname?access_token=${GIT_TOKEN}" \
+        -H  "accept: application/json"
+}
+
+remove_repo_from_team() {
+    local pkg="$1" org="$2" team="$3"
+    local id=$(get_team_id "$org" "$team")
+    local gitname=$(get_compliant_name "$pkg")
+
+    msg2 "Removing package repo [%s] from team (%s)" "$gitname" "$team"
+
+    curl -s -X DELETE "${GIT_URL}/api/v1/teams/$id/repos/$org/$gitname?access_token=${GIT_TOKEN}" \
         -H  "accept: application/json"
 }

lib/pkg/subrepo.sh

@@ -12,14 +12,6 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-get_local_head(){
-    echo $(git log --pretty=%H ...refs/heads/master^ | head -n 1)
-}
-
-get_remote_head(){
-    echo $(git ls-remote origin -h refs/heads/master | cut -f1)
-}
-
 get_pkg_org(){
     local pkg="$1" org= sub=
     case ${pkg} in
@@ -31,130 +23,34 @@ get_pkg_org(){
     echo $org
 }
 
+subrepo_init() {
+    local pkg="$1" org="$2"
+    local gitname=$(get_compliant_name "$pkg")
+    msg2 "Subrepo init (%s)" "$pkg"
+    git subrepo init "$pkg" -r gitea@"${GIT_DOMAIN}":"$org"/"$gitname".git
+}
+
 subrepo_push(){
     local pkg="$1"
-    msg2 "Push (%s)" "$pkg"
-    git subrepo push "$pkg"
+    msg2 "Subrepo push (%s)" "$pkg"
+    git subrepo push "$pkg" || die "%s push failed" "$pkg"
 }
 
 subrepo_clean(){
     local pkg="$1"
-    msg2 "Clean (%s)" "$pkg"
+    msg2 "Subrepo clean (%s)" "$pkg"
     git subrepo clean "$pkg"
 }
 
 subrepo_pull(){
     local pkg="$1"
-    msg2 "Pull (%s)" "$pkg"
+    msg2 "Subrepo pull (%s)" "$pkg"
     git subrepo pull "$pkg"
 }
 
 subrepo_clone(){
     local pkg="$1" org="$2"
     local gitname=$(get_compliant_name "$pkg")
-    msg2 "Clone [%s] from (%s)" "$pkg" "$org/$gitname"
+    msg2 "Subrepo clone [%s] from (%s)" "$pkg" "$org/$gitname"
     git subrepo clone gitea@"${GIT_DOMAIN}":"$org"/"$gitname".git "$pkg"
 }
-
-clone_tree(){
-    local timer=$(get_timer) url="$1" tree="$2" os="${3:-$(get_osname)}"
-
-    msg "Cloning %s (%s) ..." "$tree" "$os"
-
-    git clone $url/$tree.git
-    show_elapsed_time "${FUNCNAME}" "${timer}"
-}
-
-has_changes(){
-    local head_l="$1" head_r="$2"
-    if [[ "$head_l" == "$head_r" ]]; then
-        msg2 "remote changes: no"
-        return 1
-    else
-        msg2 "remote changes: yes"
-        return 0
-    fi
-}
-
-pull_tree(){
-    local tree="$1" local_head="$2" os="${3:-$(get_osname)}"
-    local remote_head=$(get_remote_head)
-
-    msg "Checking %s (%s)" "${tree}" "$os"
-    if $(has_changes "${local_head}" "${remote_head}");then
-        git pull origin master
-    fi
-}
-
-push_tree(){
-    local tree="$1"
-    msg "Update (%s)" "${tree}"
-    git push origin master
-}
-
-write_jenkinsfile(){
-    local pkg="$1"
-    local jenkins=$pkg/Jenkinsfile
-
-    echo "@Library('artix-ci') import org.artixlinux.RepoPackage" > $jenkins
-    echo '' >> $jenkins
-    echo 'PackagePipeline(new RepoPackage(this))' >> $jenkins
-    echo '' >> $jenkins
-
-    git add $jenkins
-}
-
-write_agentyaml(){
-    local pkg="$1"
-    local agent=$pkg/.artixlinux/agent.yaml label='master'
-    [[ -d $pkg/.artixlinux ]] || mkdir $pkg/.artixlinux
-
-    echo '%YAML 1.2' > $agent
-    echo '---' >> $agent
-    echo '' >> $agent
-    echo "label: $label" >> $agent
-    echo '' >> $agent
-
-    git add $agent
-}
-
-commit_jenkins_files(){
-    local pkg="$1"
-
-    write_jenkinsfile "$pkg"
-    write_agentyaml "$pkg"
-
-    git commit -m "add jenkinsfile & .artixlinux/agent.yaml"
-}
-
-config_tree(){
-    local tree="$1"
-    cd $tree
-        git config --bool pull.rebase true
-        git config commit.gpgsign true
-        if [[ -n "${GPGKEY}" ]];then
-            git config user.signingkey "${GPGKEY}"
-        else
-            warning "No GPGKEY configured in makepkg.conf!"
-        fi
-    cd ..
-}
-
-subrepo_new(){
-    local pkg="$1" tree="$2" team="${3:-$2}"
-    local dest=${TREE_DIR_ARTIX}/$tree/$pkg/trunk
-
-    cd ${TREE_DIR_ARTIX}/$tree
-
-    local org=$(get_pkg_org "$pkg")
-
-    create_repo "$pkg" "$org"
-
-    add_repo_to_team "$pkg" "$org" "$team"
-
-    subrepo_clone "$pkg" "$org"
-
-    prepare_dir "$dest"
-
-    commit_jenkins_files "$pkg"
-}

lib/pkg/util.sh

@@ -12,212 +12,47 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
+shopt -s extglob
+
 get_compliant_name(){
     local gitname="$1"
-    case $gitname in
+    case "$gitname" in
         *+) gitname=${gitname//+/plus}
     esac
-    echo $gitname
+    echo "$gitname"
 }
 
-patch_pkg(){
-    local pkg="$1"
-    case $pkg in
-        'glibc')
-            sed -e 's|{locale,systemd/system,tmpfiles.d}|{locale,tmpfiles.d}|' \
-                -e '/nscd.service/d' \
-                -i $pkg/trunk/PKGBUILD
-        ;;
-        'tp_smapi'|'acpi_call'|'r8168'|'bbswitch'|'broadcom-wl')
-            sed -e 's|-ARCH|-ARTIX|g' -i $pkg/trunk/PKGBUILD
-        ;;
-        'nvidia')
-            sed -e 's|-ARCH|-ARTIX|g'  -e 's|for Arch kernel|for Artix kernel|g' \
-                -e 's|for LTS Arch kernel|for LTS Artix kernel|g' \
-                -i $pkg/trunk/PKGBUILD
-        ;;
-        'linux')
-            sed -e 's|-ARCH|-ARTIX|g' -i $pkg/trunk/PKGBUILD
-            sed -e 's|CONFIG_DEFAULT_HOSTNAME=.*|CONFIG_DEFAULT_HOSTNAME="artixlinux"|' \
-                -e 's|CONFIG_CRYPTO_SPECK=.*|CONFIG_CRYPTO_SPECK=n|' \
-                -i $pkg/trunk/config
-            cd $pkg/trunk
-                updpkgsums
-            cd ../..
+set_arch_repos(){
+    local x="$1" y="$2" z="$3"
+    ARCH_REPOS=(core extra community multilib)
 
-        ;;
-        'licenses')
-            sed -e 's|https://www.archlinux.org/|https://www.artixlinux.org/|' -i $pkg/trunk/PKGBUILD
-        ;;
-        'bash')
-            sed -e 's|system.bash_logout)|system.bash_logout artix.bashrc)|' \
-            -e "s|etc/bash.|etc/bash/|g" \
-            -e 's|"$pkgdir/etc/skel/.bash_logout"|"$pkgdir/etc/skel/.bash_logout"\n  install -Dm644 artix.bashrc $pkgdir/etc/bash/bashrc.d/artix.bashrc|' \
-            -i $pkg/trunk/PKGBUILD
-
-
-            cd $pkg/trunk
-                patch -Np 1 -i ${DATADIR}/patches/artix-bash.patch
-                updpkgsums
-            cd ../..
-        ;;
-        gstreamer|gst-plugins-*)
-            sed -e 's|https://www.archlinux.org/|https://www.artixlinux.org/|' \
-                -e 's|(Arch Linux)|(Artix Linux)|' \
-                -i $pkg/trunk/PKGBUILD
-        ;;
-    esac
-}
-
-arch2artix(){
-    local repo="$1" artix=none
-    case "$repo" in
-        core) artix=system ;;
-        extra) artix=world ;;
-        community) artix=galaxy ;;
-        multilib) artix=lib32 ;;
-        staging) artix=goblins ;;
-        testing) artix=gremlins ;;
-        community-staging) artix=galaxy-goblins ;;
-        community-testing) artix=galaxy-gremlins ;;
-        multilib-staging) artix=lib32-goblins ;;
-        multilib-testing) artix=lib32-gremlins ;;
-        kde-unstable) artix=kde-wobble ;;
-        gnome-unstable) artix=gnome-wobble ;;
-    esac
-    echo $artix
-}
-
-find_tree(){
-    local tree="$1" pkg="$2"
-    local result=$(find $tree -mindepth 2 -maxdepth 2 -type d -name "$pkg")
-    result=${result%/*}
-    echo ${result##*/}
-}
-
-arch_repos(){
-    local stag="$1" unst="$2"
-    local repos=(core extra testing community community-testing multilib multilib-testing)
-
-    $stag && repos+=(staging community-staging multilib-staging)
-    $unst && repos+=(gnome-unstable kde-unstable)
-
-    echo ${repos[@]}
+    $x && ARCH_REPOS+=(testing community-testing multilib-testing)
+    $y && ARCH_REPOS+=(staging community-staging multilib-staging)
+    $z && ARCH_REPOS+=(gnome-unstable kde-unstable)
 }
 
 find_repo(){
-    local pkg="$1" stag="$2" unst="$3" repo=
-
-    for r in $(arch_repos "$stag" "$unst");do
-        [[ -f $pkg/repos/$r-x86_64/PKGBUILD ]] && repo=$r-x86_64
+    local pkg="$1" repo=
+    for r in ${ARCH_REPOS[@]};do
+        [[ -f $pkg/repos/$r-${ARCH}/PKGBUILD ]] && repo=$r-${ARCH}
         [[ -f $pkg/repos/$r-any/PKGBUILD ]] && repo=$r-any
     done
     echo $repo
 }
 
-is_valid_repo(){
-    local src="$1" cases=
-    for r in $(arch_repos true true);do
-        cases=${cases:-}${cases:+|}${r}
-    done
-    eval "case $src in
-        ${cases}|trunk) return 0 ;;
-        *) return 1 ;;
-    esac"
+find_pkg(){
+    local searchdir="$1" pkg="$2"
+    local result=$(find "$searchdir" -mindepth 2 -maxdepth 2 -type d -name "$pkg")
+    echo "$result"
 }
 
-get_cases(){
-    local pkglist="${SYSCONFDIR}/pkglist.d/$1.list"
-
-    local _space="s| ||g" _clean=':a;N;$!ba;s/\n/ /g' _com_rm="s|#.*||g"
-
-    local pkgs=($(sed "$_com_rm" "$pkglist" | sed "$_space" | sed "$_clean"))
-
-    local cases=
-    for p in ${pkgs[@]};do
-        cases=${cases:-}${cases:+|}${p}
-    done
-    echo $cases
-}
-
-get_artix_tree(){
-    local pkg="$1" artix_tree="${2:-$3}" tree
-    eval "case $pkg in
-        $(get_cases kernel)) tree=packages-kernel ;;
-        $(get_cases python)) tree=packages-python ;;
-        $(get_cases perl)) tree=packages-perl ;;
-        $(get_cases ruby)) tree=packages-ruby ;;
-        $(get_cases openrc)) tree=packages-openrc ;;
-        $(get_cases runit)) tree=packages-runit ;;
-        $(get_cases media)) tree=packages-media ;;
-        $(get_cases xorg)) tree=packages-xorg ;;
-        $(get_cases qt5)) tree=packages-qt5 ;;
-        $(get_cases gtk)) tree=packages-gtk ;;
-        $(get_cases devel)) tree=packages-devel ;;
-        $(get_cases lxqt)) tree=packages-lxqt ;;
-        $(get_cases cinnamon)) tree=packages-cinnamon ;;
-        $(get_cases kde)) tree=packages-kde ;;
-        $(get_cases gnome)) tree=packages-gnome ;;
-        $(get_cases mate)) tree=packages-mate ;;
-        *) tree=$artix_tree
-    esac"
-    echo $tree
-}
-
-get_import_path(){
-    local pkg="$1" import_path=
-    for tree in ${TREE_NAMES_ARCH[@]};do
-        [[ -d ${TREE_DIR_ARCH}/$tree/$pkg/repos ]] && import_path=${TREE_DIR_ARCH}/$tree/$pkg
-    done
-    echo $import_path
-}
-
-pkgver_equal() {
-    if [[ $1 = *-* && $2 = *-* ]]; then
-        # if both versions have a pkgrel, then they must be an exact match
-        [[ $1 = "$2" ]]
-    else
-        # otherwise, trim any pkgrel and compare the bare version.
-        [[ ${1%%-*} = "${2%%-*}" ]]
-    fi
-}
-
-find_cached_package() {
+find_cached_pkgfile() {
     local searchdirs=("$PKGDEST" "$PWD") results=()
-    local targetname=$1 targetver=$2 targetarch=$3
-    local dir pkg pkgbasename name ver rel arch r results
-
+    local pkg="$1"
     for dir in "${searchdirs[@]}"; do
-        [[ -d $dir ]] || continue
-
-        for pkg in "$dir"/*.pkg.tar.?z; do
-            [[ -f $pkg ]] || continue
-
-            # avoid adding duplicates of the same inode
-            for r in "${results[@]}"; do
-                [[ $r -ef $pkg ]] && continue 2
-            done
-
-            # split apart package filename into parts
-            pkgbasename=${pkg##*/}
-            pkgbasename=${pkgbasename%.pkg.tar.?z}
-
-            arch=${pkgbasename##*-}
-            pkgbasename=${pkgbasename%-"$arch"}
-
-            rel=${pkgbasename##*-}
-            pkgbasename=${pkgbasename%-"$rel"}
-
-            ver=${pkgbasename##*-}
-            name=${pkgbasename%-"$ver"}
-
-            if [[ $targetname = "$name" && $targetarch = "$arch" ]] &&
-                pkgver_equal "$targetver" "$ver-$rel"; then
-                results+=("$pkg")
-            fi
-        done
+        [[ -d "$dir" ]] || continue
+        [[ -e "$dir/$pkg" ]] && results+=("$dir/$pkg")
     done
-
     case ${#results[*]} in
         0)
             return 1

lib/util-base.sh.in

@@ -20,6 +20,40 @@ DATADIR=${DATADIR:-'@datadir@/artools'}
 LIBDIR=${LIBDIR:-'@libdir@/artools'}
 SYSCONFDIR=${SYSCONFDIR:-'@sysconfdir@/artools'}
 
+OWNER=${SUDO_USER:-$USER}
+
+if [[ -n $SUDO_USER ]]; then
+    eval "USER_HOME=~$SUDO_USER"
+else
+    USER_HOME=$HOME
+fi
+
+USER_CONF_DIR="${XDG_CONFIG_HOME:-$USER_HOME/.config}/artools"
+
 for baselib in ${LIBDIR}/base/*.sh; do
     . $baselib
 done
+
+prepare_artools(){
+    prepare_dir "${WORKSPACE_DIR}"
+    prepare_dir "${USER_CONF_DIR}"
+}
+
+load_base_config(){
+
+    local conf="$1/artools-base.conf"
+
+    [[ -f "$conf" ]] || return 1
+
+    [[ -r "$conf" ]] && . "$conf"
+
+    ARCH=$(uname -m)
+
+    CHROOTS_DIR=${CHROOTS_DIR:-'/var/lib/artools'}
+
+    WORKSPACE_DIR=${WORKSPACE_DIR:-"/home/${OWNER}/artools-workspace"}
+
+    return 0
+}
+
+load_base_config "${USER_CONF_DIR}" || load_base_config "${SYSCONFDIR}"

lib/util-iso.sh.in

@@ -12,6 +12,43 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
+. @libdir@/artools/util-base.sh
+
 for isolib in ${LIBDIR}/iso/*.sh; do
     . $isolib
 done
+
+load_iso_config(){
+
+    local conf="$1/artools-iso.conf"
+
+    [[ -f "$conf" ]] || return 1
+
+    [[ -r "$conf" ]] && . "$conf"
+
+    CHROOTS_ISO="${CHROOTS_DIR}/buildiso"
+
+    ISO_POOL=${ISO_POOL:-"${WORKSPACE_DIR}/iso"}
+
+    PROFILE='base'
+
+    ISO_VERSION=${ISO_VERSION:-"$(date +%Y%m%d)"}
+
+    INITSYS=${INITSYS:-'openrc'}
+
+    GPG_KEY=${GPG_KEY:-''}
+
+    UPLIMIT=${UPLIMIT:-1000}
+
+    FILE_HOST="download.${DOMAIN}"
+
+    FILE_HOME=${FILE_HOME:-'/srv/iso'}
+
+    FILE_PORT=${FILE_PORT:-65432}
+
+    ACCOUNT=${ACCOUNT:-'naughtyISOuploader'}
+
+    return 0
+}
+
+load_iso_config "${USER_CONF_DIR}" || load_iso_config "${SYSCONFDIR}"

lib/util-pkg.sh.in

@@ -12,6 +12,79 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
+. @libdir@/artools/util-base.sh
+
 for pkglib in ${LIBDIR}/pkg/*.sh; do
     . $pkglib
 done
+
+load_pkg_config(){
+
+    local conf="$1/artools-pkg.conf"
+
+    [[ -f "$conf" ]] || return 1
+
+    [[ -r "$conf" ]] && . "$conf"
+
+    DOMAIN='artixlinux.org'
+
+    GIT_DOMAIN="gitea.${DOMAIN}"
+
+    GIT_URL="https://${GIT_DOMAIN}"
+
+    GIT_TOKEN=${GIT_TOKEN:-''}
+
+    TREE_DIR_ARTIX=${TREE_DIR_ARTIX:-"${WORKSPACE_DIR}/artixlinux"}
+
+    [[ -z ${TREE_NAMES_ARTIX[@]} ]] && \
+    TREE_NAMES_ARTIX=(
+            packages
+            community
+            packages-kernel
+            packages-net
+            packages-gfx
+            packages-openrc
+            packages-runit
+            packages-s6
+            packages-xorg
+            packages-python
+            packages-perl
+            packages-java
+            packages-qt5
+            packages-devel
+            packages-ruby
+            packages-gtk
+            packages-gnome
+            packages-cinnamon
+            packages-lxqt
+            packages-mate
+            packages-kde
+            packages-xfce
+            packages-wm
+#             packages-haskell
+    )
+
+    HOST_TREE_ARTIX=${HOST_TREE_ARTIX:-"gitea@${GIT_DOMAIN}:artixlinux"}
+
+    TREE_DIR_ARCH=${TREE_DIR_ARCH:-"${WORKSPACE_DIR}/archlinux"}
+
+    TREE_NAMES_ARCH=(packages community)
+
+    HOST_TREE_ARCH=${HOST_TREE_ARCH:-'git://git.archlinux.org/svntogit'}
+
+    CHROOTS_PKG="${CHROOTS_DIR}/buildpkg"
+
+    REPOS_ROOT=${REPOS_ROOT:-"${WORKSPACE_DIR}/repos"}
+
+    REPOS_MIRROR=${REPOS_MIRROR:-'http://mirror1.artixlinux.org/repos'}
+
+    DBEXT=${DBEXT:-'xz'}
+
+    LINKSDBEXT=${LINKSDBEXT:-"links.tar.${DBEXT}"}
+
+    PKGDBEXT=${PKGDBEXT:-"db.tar.${DBEXT}"}
+
+    return 0
+}
+
+load_pkg_config "${USER_CONF_DIR}" || load_pkg_config "${SYSCONFDIR}"