data/pacman: sync conf with pacman-6.0.0-3

Signed-off-by: Nathan Owens <ndowens@artixlinux.org>

Makefile

@@ -1,4 +1,4 @@
-VERSION=0.23
+VERSION=0.24
 
 TOOLS = artools
 PREFIX ?= /usr
@@ -38,7 +38,8 @@ PKG_BIN = \
 	bin/pkg/find-libdeps \
 	bin/pkg/batchpkg \
 	bin/pkg/signpkg \
-	bin/pkg/checkrepo
+	bin/pkg/checkrepo \
+	bin/pkg/gitearepo
 
 LN_COMMITPKG = \
 	extrapkg \
@@ -87,6 +88,9 @@ PKG_DATA = \
 	data/pacman/makepkg.conf \
 	data/valid-names.conf
 
+PROTO = \
+	$(wildcard data/proto/*.proto)
+
 PATCHES = \
 	$(wildcard data/patches/*.patch)
 
@@ -160,6 +164,9 @@ install_pkg:
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
 	install $(FILEMODE) $(PATCHES) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
 
+	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/proto
+	install $(FILEMODE) $(PROTO) $(DESTDIR)$(DATADIR)/$(TOOLS)/proto
+
 install_cpio:
 	+make CPIODIR=$(CPIODIR) DESTDIR=$(DESTDIR) -C initcpio install
 

README.md

@@ -18,17 +18,13 @@ artools
 ##### Runtime:
 
 - base:
-  * openssh
-  * rsync
-  * haveged
   * os-prober
-  * gnupg
   * pacman
 
 - pkg:
   * namcap
   * git-subrepo
-  * jq
+  * rsync
 
 - iso:
   * dosfstools

bin/base/fstabgen.in

@@ -364,23 +364,19 @@ while read -r src target fstype opts fsroot; do
         pass=0
     fi
 
-    if [[ $fsroot != / ]]; then
+    if [[ $fsroot != / && $fstype != btrfs ]]; then
-        if [[ $fstype = btrfs ]]; then
+        # it's a bind mount
-            opts+=,subvol=${fsroot#/}
+        src=$(findmnt -funcevo TARGET "$src")$fsroot
-        else
+        if [[ $src -ef $target ]]; then
-            # it's a bind mount
+            # hrmm, this is weird. we're probably looking at a file or directory
-            src=$(findmnt -funcevo TARGET "$src")$fsroot
+            # that was bound into a chroot from the host machine. Ignore it,
-            if [[ $src -ef $target ]]; then
+            # because this won't actually be a valid mount. Worst case, the user
-                # hrmm, this is weird. we're probably looking at a file or directory
+            # just re-adds it.
-                # that was bound into a chroot from the host machine. Ignore it,
+            continue
-                # because this won't actually be a valid mount. Worst case, the user
-                # just re-adds it.
-                continue
-            fi
-            fstype=none
-            opts+=,bind
-            pass=0
         fi
+        fstype=none
+        opts+=,bind
+        pass=0
     fi
 
     # filesystem quirks

bin/pkg/buildtree.in

@@ -15,54 +15,35 @@
 m4_include(lib/util-base.sh)
 m4_include(lib/util-pkg.sh)
 m4_include(lib/base/message.sh)
+m4_include(lib/pkg/common.sh)
 m4_include(lib/pkg/git.sh)
+m4_include(lib/pkg/gitea.sh)
 m4_include(lib/pkg/repo.sh)
 m4_include(lib/pkg/jenkins.sh)
 
 #{{{ new git repo
 
-get_compliant_name(){
-    local gitname="$1"
-    case "$gitname" in
-        *+) gitname=${gitname//+/plus} ;;
-        *+*) gitname=${gitname//+/-} ;;
-    esac
-    echo "$gitname"
-}
-
 subrepo_clone(){
-    local pkg="$1" org="$2" gitname
+    local pkg="$1"
-    gitname=$(get_compliant_name "$pkg")
+    local org="$2"
-    msg2 "Subrepo clone [%s] from (%s)" "$pkg" "$org/$gitname"
+    local name="$3"
-    git subrepo clone "${GIT_SSH}":"$org"/"$gitname".git "$pkg"
-}
 
-create_repo() {
+    msg2 "Subrepo clone [%s] from (%s)" "$pkg" "$org/$name"
-    local pkg="$1" org="$2" gitname
+    git subrepo clone "${GIT_SSH}":"$org"/"$name".git "$pkg"
-    gitname=$(get_compliant_name "$pkg")
-    local json="{ \"auto_init\": true, \"name\":\"$gitname\", \"gitignores\":\"ArchLinuxPackages\", \"readme\": \"Default\" }"
-
-    msg2 "Create package repo [%s] in org (%s)" "${pkg}" "${org}"
-
-    curl -s -X POST "${GIT_URL}/api/v1/org/$org/repos?access_token=${GIT_TOKEN}" \
-        -H "accept: application/json" \
-        -H "content-type: application/json" \
-        -d "$json"
-
-    echo
 }
 
 subrepo_new(){
     cd "${TREE_DIR_ARTIX}/${group}" || return
 
-    local org
+    local org gitname
     org=$(get_pkg_org "${package}")
+    gitname=$(get_compliant_name "${package}")
 
-    create_repo "${package}" "$org"
+    gitearepo -cr "$gitname"
 
-    add_repo_to_team "${package}" "$org" "${team}"
+    add_team_to_repo "$gitname" "$org" "${team}"
 
-    subrepo_clone "${package}" "$org"
+    subrepo_clone "${package}" "$org" "$gitname"
 
     mkdir -p "${TREE_DIR_ARTIX}/${group}/${package}/trunk"
 

bin/pkg/commitpkg.in

@@ -15,7 +15,9 @@
 m4_include(lib/util-base.sh)
 m4_include(lib/util-pkg.sh)
 m4_include(lib/base/message.sh)
+m4_include(lib/pkg/common.sh)
 m4_include(lib/pkg/git.sh)
+m4_include(lib/pkg/gitea.sh)
 m4_include(lib/pkg/repo.sh)
 
 #{{{ functions
@@ -47,7 +49,7 @@ subrepo_pull(){
 prepare_commit(){
     # create new layout, copy & remove repos
     if [[ -d repos ]]; then
-        msg "Switching to new layout ..."
+        msg2 "Switching to new layout ..."
         [[ ! -d "$CARCH" ]] && mkdir "$CARCH"
 
         for r in repos/*; do
@@ -61,7 +63,7 @@ prepare_commit(){
 
         git rm -r repos
         git commit -m "switch to new repo layout"
-        msg "Done switch"
+        msg2 "Done switch"
     fi
 
     if [[ $action == 'add' ]] || [[ $action == 'move' ]] ;then
@@ -85,7 +87,7 @@ check_rebuild(){
 
 check_team(){
     if [[ "${repo_src}" == "${valid_names[0]}" \
-    && "${repo_dest}" == "${valid_names[1]}" ]] || \
+        && "${repo_dest}" == "${valid_names[1]}" ]] || \
         [[ "${repo_src}" == "${valid_names[1]}" \
         && "${repo_dest}" == "${valid_names[0]}" ]] || \
         [[ "${repo_src}" == "${valid_names[1]}" \
@@ -93,10 +95,11 @@ check_team(){
         [[ "${repo_src}" == "${valid_names[2]}" \
         && "${repo_dest}" == "${valid_names[1]}" ]] ;then
 
-        local org
+        local org gitname
         org=$(get_pkg_org "${package}")
-        add_repo_to_team "${package}" "$org" "${repo_dest}"
+        gitname=$(get_compliant_name "${package}")
-        remove_repo_from_team "${package}" "$org" "${repo_src}"
+        add_team_to_repo "$gitname" "${org}" "${repo_dest}"
+        remove_team_from_repo "$gitname" "${org}" "${repo_src}"
     fi
 }
 
@@ -112,22 +115,24 @@ path_config() {
     . "$pkgbuild"
 }
 
+get_commit_msg() {
+    echo "[${repo_src}] -> [${repo_dest}] '${package}-$(get_full_version)' ${action}"
+}
+
 commit_pkg() {
     local commit_msg pkg
-    if ${remove};then
+    if ${remove}; then
         action='remove'
+        commit_msg="[${repo_src}] '$pkg' ${action}"
+        msg "Action: %s" "$commit_msg"
         if [[ "${repo_src}" == 'trunk' ]];then
             pkg=${package}
             git rm -r trunk
         else
             pkg="${package}-$(get_full_version)"
-
             prepare_commit
-
             git rm -r "$CARCH/${repo_src}"
         fi
-        commit_msg="[${repo_src}] '$pkg' ${action}"
-        msg "Action: %s" "$commit_msg"
     else
         action='modify'
         commit_msg="[${repo_src}] '${package}-$(get_full_version)' ${action}"
@@ -139,25 +144,22 @@ commit_pkg() {
 
 repo_commit_pkg() {
     local commit_msg
-    if [[ "${repo_src}" == 'trunk' ]];then
+    if [[ "${repo_src}" == 'trunk' ]]; then
         action='add'
-
+        commit_msg=$(get_commit_msg)
+        msg "Action: %s" "$commit_msg"
         prepare_commit
         check_rebuild
-
         cp trunk/* "$CARCH/${repo_dest}"/
     else
         action='move'
         [[ ! -f $pkgbuild ]] && die "%s does not exist!" "$pkgbuild"
-
+        commit_msg=$(get_commit_msg)
+        msg "Action: %s" "$commit_msg"
         prepare_commit
-
         cp "$CARCH/${repo_src}"/* "$CARCH/${repo_dest}"/
         git rm -r "$CARCH/${repo_src}"
     fi
-    commit_msg="[${repo_src}] -> [${repo_dest}] '${package}-$(get_full_version)' ${action}"
-    msg "Action: %s" "$commit_msg"
-
     git add .
     git commit -m "$commit_msg"
 }

bin/pkg/comparepkg.in

@@ -40,7 +40,11 @@ compare_m(){
                 msg_row_yellow "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
             else
                 msg_row_green "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
-                [[ -n "$archrepo" ]] && write_list "${a}:${b}:$pkg" pkg_moves
+                if [[ -n "$archrepo" ]]; then
+                    write_list "${a}:${b}:$pkg" pkg_moves
+                else
+                    write_list "@repo@:${b}:$pkg" artix
+                fi
             fi
         ;;
     esac
@@ -142,6 +146,7 @@ show_downgrades_table(){
 show_move_table(){
     show_compare_header
     remove_list pkg_moves
+    remove_list artix
     tree_loop compare_move
 }
 

bin/pkg/gitearepo.in

@@ -0,0 +1,89 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-21 artoo@artixlinux.org
+# Copyright (C) 2021 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/common.sh)
+
+#{{{ functions
+
+create_repo() {
+    local name="$1"
+    local org="$2"
+    local json url
+
+    json="{ \"auto_init\": true, \"name\":\"$name\", \"gitignores\":\"ArchLinuxPackages\", \"readme\": \"Default\" }"
+
+    url="${GIT_URL}/api/v1/org/$org/repos?access_token=${GIT_TOKEN}"
+
+    msg2 "Create package repo [%s] in org (%s)" "$name" "$org"
+
+    api_post "$url" -H "accept: application/json" \
+                    -H "content-type: application/json" \
+                    -d "$json"
+}
+
+transfer_repo() {
+    local name="$1"
+    local old_owner="$2"
+    local new_owner="landfill" json url
+    local json url
+
+    json="{  \"new_owner\": \"$new_owner\",  \"team_ids\": []}"
+
+    url="${GIT_URL}/api/v1/repos/$old_owner/$name/transfer?access_token=${GIT_TOKEN}"
+
+    msg2 "Transfer package repo [%s] in org (%s)" "$name" "$new_owner"
+
+    api_post "$url" -H  "accept: application/json" \
+                    -H  "Content-Type: application/json" \
+                    -d "$json"
+}
+
+#}}}
+
+usage() {
+    echo "Usage: ${0##*/} [options]"
+    echo '    -r <repo>     Repo name'
+    echo '    -c            Create git repo'
+    echo '    -t            Transfer git repo to landfill org'
+    echo '    -h            This help'
+    echo ''
+    echo ''
+    exit "$1"
+}
+
+create=false
+transfer=false
+
+opts='r:cth'
+
+while getopts "${opts}" arg; do
+    case "${arg}" in
+        r) repo="$OPTARG" ;;
+        c) create=true ;;
+        t) transfer=true ;;
+        h|?) usage 0 ;;
+        *) echo "invalid argument '${arg}'"; usage 1 ;;
+    esac
+done
+
+shift $(( OPTIND - 1 ))
+
+org=$(get_pkg_org "${repo}")
+
+${create} && create_repo "${repo}" "${org}"
+
+${transfer} && transfer_repo "${repo}" "${org}"

bin/pkg/links-add.in

@@ -35,7 +35,7 @@ REPO_DB_PREFIX=
 REPO_DB_SUFFIX=
 LOCKFILE=
 CLEAN_LOCK=0
-# PREVENT_DOWNGRADE=0
+PREVENT_DOWNGRADE=0
 
 # ensure we have a sane umask set
 umask 0022
@@ -53,7 +53,7 @@ Multiple packages to add can be specified on the command line.\n"
         printf -- "\n"
         printf -- "Options:\n"
         printf -- "  -n, --new         only add packages that are not already in the database\n"
-#         printf -- "$(gettext "  -p, --prevent-downgrade  do not add package to database if a newer version is already present\n")"
+        printf -- "  -p, --prevent-downgrade  do not add package to database if a newer version is already present\n"
     elif [[ $cmd == "links-remove" ]] ; then
         printf -- "Usage: links-remove [options] <path-to-db> <packagename> ...\n"
         printf -- "\n"
@@ -103,7 +103,7 @@ check_gpg() {
     fi
 
     if (( ! VERIFY )); then
-        if ! gpg --list-key "${GPGKEY}" &>/dev/null; then
+        if ! gpg --list-secret-key ${GPGKEY:+"$GPGKEY"} &>/dev/null; then
             if [[ -n "$GPGKEY" ]]; then
                 error "The key ${GPGKEY} does not exist in your keyring."
             elif (( ! KEY )); then
@@ -121,11 +121,11 @@ create_signature() {
     local ret=0
     msg "Signing database '%s'..." "${dbfile##*/.tmp.}"
 
-    local SIGNWITHKEY=""
+    local SIGNWITHKEY=()
     if [[ -n $GPGKEY ]]; then
-        SIGNWITHKEY="-u ${GPGKEY}"
+        SIGNWITHKEY=(-u "${GPGKEY}")
     fi
-    gpg --detach-sign --use-agent --no-armor "${SIGNWITHKEY}" "$dbfile" &>/dev/null || ret=$?
+    gpg --detach-sign --use-agent --no-armor "${SIGNWITHKEY[@]}" "$dbfile" &>/dev/null || ret=$?
 
     if (( ! ret )); then
         msg2 "Created signature file '%s'" "${dbfile##*/.tmp.}.sig"
@@ -155,21 +155,13 @@ verify_signature() {
 }
 
 verify_repo_extension() {
-    local repofile=$1
+    local junk=()
+    if [[ $1 = *.links.tar* ]] && get_compression_command "$1" junk; then
+        return 0
+    fi
 
-    case $repofile in
+    error "'%s' does not have a valid database archive extension." "$1"
-        *.links.tar.gz)  TAR_OPT="z" ;;
+    exit 1
-        *.links.tar.bz2) TAR_OPT="j" ;;
-        *.links.tar.xz)  TAR_OPT="J" ;;
-        *.links.tar.zst) TAR_OPT="--zstd" ;;
-        *.links.tar.Z)   TAR_OPT="Z" ;;
-        *.links.tar)     TAR_OPT="" ;;
-        *) error "'%s' does not have a valid database archive extension." \
-                "$repofile"
-            exit 1 ;;
-    esac
-
-    printf '%s' "$TAR_OPT"
 }
 
 # write an entry to the pacman database
@@ -201,18 +193,18 @@ db_write_entry() {
         if (( ONLYADDNEW )); then
             return 0
         fi
-#     else
+    else
-#         pkgentry=$(find_pkgentry "$pkgname")
+        pkgentry=$(find_pkgentry "$pkgname")
-#         if [[ -n $pkgentry ]]; then
+        if [[ -n $pkgentry ]]; then
-#
+
-#             local version=$(sed -n '/^%VERSION%$/ {n;p;q}' "$pkgentry/desc")
+            local version=$(sed -n '/^%VERSION%$/ {n;p;q}' "$pkgentry/desc")
-#             if (( $(vercmp "$version" "$pkgver") > 0 )); then
+            if (( $(vercmp "$version" "$pkgver") > 0 )); then
-#                 warning "$(gettext "A newer version for '%s' is already present in database")" "$pkgname"
+                warning "A newer version for '%s' is already present in database" "$pkgname"
-#                 if (( PREVENT_DOWNGRADE )); then
+                if (( PREVENT_DOWNGRADE )); then
-#                     return 0
+                    return 0
-#                 fi
+                fi
-#             fi
+            fi
-#         fi
+        fi
     fi
 
     # remove an existing entry if it exists, ignore failures
@@ -397,7 +389,6 @@ rotate_db() {
 }
 
 create_db() {
-    TAR_OPT=$(verify_repo_extension "$REPO_DB_FILE")
     # $LOCKFILE is already guaranteed to be absolute so this is safe
     dirname=${LOCKFILE%/*}
 
@@ -406,13 +397,13 @@ create_db() {
     tempname=$dirname/.tmp.$filename
 
     pushd "$tmpdir/${REPO_DB_NAME}" >/dev/null
-    if ( shopt -s nullglob; files=(*); (( ${#files[*]} )) ); then
+    local files=(*)
-        bsdtar -c"${TAR_OPT}"f "$tempname" *
+    if [[ ${files[*]} = '*' ]]; then
-    else
         # we have no packages remaining? zip up some emptyness
         warning "No packages remain, creating empty database."
-        bsdtar -c"${TAR_OPT}"f "$tempname" -T /dev/null
+        files=(-T /dev/null)
     fi
+    bsdtar -cf - "${files[@]}" | compress_as "$filename" > "$tempname"
     popd >/dev/null
 
     create_signature "$tempname"
@@ -476,7 +467,7 @@ while (( $# )); do
         -s|--sign) SIGN=1 ;;
         -k|--key) KEY=1 ; shift; GPGKEY=$1 ;;
         -v|--verify) VERIFY=1 ;;
-#         -p|--prevent-downgrade) PREVENT_DOWNGRADE=1 ;;
+        -p|--prevent-downgrade) PREVENT_DOWNGRADE=1 ;;
         *) args+=("$1") ;;
     esac
     shift
@@ -494,7 +485,7 @@ else
     LOCKFILE=$PWD/$REPO_DB_FILE.lck
 fi
 
-verify_repo_extension "$REPO_DB_FILE" >/dev/null
+verify_repo_extension "$REPO_DB_FILE"
 
 REPO_DB_PREFIX=${REPO_DB_FILE##*/}
 REPO_DB_PREFIX=${REPO_DB_PREFIX%.links.*}

data/conf/artools-pkg.conf

@@ -13,6 +13,7 @@
 #         packages-openrc
 #         packages-runit
 #         packages-s6
+#         packages-66
 #         packages-python
 #         packages-perl
 #         packages-java

data/pacman/makepkg.conf

@@ -15,7 +15,7 @@ DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
           'ftp::/usr/bin/curl -gqfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
           'http::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
           'https::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
-          'rsync::/usr/bin/rsync --no-motd -zz %u %o'
+          'rsync::/usr/bin/rsync --no-motd -z %u %o'
           'scp::/usr/bin/scp -C %u %o')
 
 # Other common tools:
@@ -26,6 +26,7 @@ DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
 #-- The package required by makepkg to download VCS sources
 #  Format: 'protocol::package'
 VCSCLIENTS=('bzr::bzr'
+            'fossil::fossil'
             'git::git'
             'hg::mercurial'
             'svn::subversion')
@@ -38,21 +39,25 @@ CARCH="x86_64"
 CHOST="x86_64-pc-linux-gnu"
 
 #-- Compiler and Linker Flags
-CPPFLAGS="-D_FORTIFY_SOURCE=2"
+#CPPFLAGS=""
-CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt"
+CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions \
-CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt"
+        -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security \
+        -fstack-clash-protection -fcf-protection"
+CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
 LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
+#RUSTFLAGS="-C opt-level=2"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 #-- Debugging flags
 DEBUG_CFLAGS="-g -fvar-tracking-assignments"
 DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
+#DEBUG_RUSTFLAGS="-C debuginfo=2"
 
 #########################################################################
 # BUILD ENVIRONMENT
 #########################################################################
 #
-# Defaults: BUILDENV=(!distcc !color !ccache check !sign)
+# Makepkg defaults: BUILDENV=(!distcc !color !ccache check !sign)
 #  A negated environment option will do the opposite of the comments below.
 #
 #-- distcc:   Use the Distributed C/C++/ObjC compiler
@@ -75,7 +80,7 @@ BUILDENV=(!distcc color !ccache check !sign)
 #   These are default values for the options=() settings
 #########################################################################
 #
-# Default: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug)
+# Makepkg defaults: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug !lto)
 #  A negated option will do the opposite of the comments below.
 #
 #-- strip:      Strip symbols from binaries/libraries
@@ -86,11 +91,12 @@ BUILDENV=(!distcc color !ccache check !sign)
 #-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
 #-- purge:      Remove files specified by PURGE_TARGETS
 #-- debug:      Add debugging flags as specified in DEBUG_* variables
+#-- lto:        Add compile flags for building with link time optimization
 #
-OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug)
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug !lto)
 
-#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
+#-- File integrity checks to use. Valid: md5, sha1, sha224, sha256, sha384, sha512, b2
-INTEGRITY_CHECK=(md5)
+INTEGRITY_CHECK=(sha256)
 #-- Options to be used when stripping binaries. See `man strip' for details.
 STRIP_BINARIES="--strip-all"
 #-- Options to be used when stripping shared libraries. See `man strip' for details.
@@ -146,4 +152,10 @@ COMPRESSLZ=(lzip -c -f)
 PKGEXT='.pkg.tar.zst'
 SRCEXT='.src.tar.gz'
 
+#########################################################################
+# OTHER
+#########################################################################
+#
+#-- Command used to run pacman as root, instead of trying sudo and su
+#PACMAN_AUTH=()
 # vim: set ft=sh ts=2 sw=2 et:

data/pacman/pacman-default.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
+NoProgressBar
-CheckSpace
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -83,15 +85,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-docker.conf

@@ -38,10 +38,11 @@ NoExtract  = usr/share/vim/vim*/lang/*
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
+NoProgressBar
-CheckSpace
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
-
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -51,7 +52,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -96,16 +97,3 @@ Include = /etc/pacman.d/mirrorlist
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-#[extra]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[community]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

data/pacman/pacman-gnome-wobble.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
+NoProgressBar
-CheckSpace
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -92,18 +94,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-goblins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
+NoProgressBar
-CheckSpace
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -89,18 +91,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-gremlins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
+NoProgressBar
-CheckSpace
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -83,15 +85,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-kde-wobble.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
+NoProgressBar
-CheckSpace
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -92,18 +94,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-lib32-goblins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
+NoProgressBar
-CheckSpace
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES

data/pacman/pacman-lib32-gremlins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
+NoProgressBar
-CheckSpace
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES

data/pacman/pacman-lib32.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
+NoProgressBar
-CheckSpace
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES

data/proto/PKGBUILD.openrc.proto

@@ -0,0 +1,38 @@
+# Maintainer: Your Name <youremail@domain.com>
+
+pkgname=NAME-openrc
+pkgver=VERSION
+pkgrel=1
+epoch=
+pkgdesc="Openrc NAME init script"
+arch=('any')
+url="https://gitea.artixlinux.org/artixlinux/packages-openrc"
+license=('GPL2')
+groups=()
+depends=("openrc" "NAME")
+makedepends=()
+checkdepends=()
+optdepends=()
+provides=("init-NAME")
+conflicts=("init-NAME")
+replaces=()
+backup=()
+options=()
+install=
+changelog=
+source=(NAME.{confd,initd})
+sha256sums=()
+
+_inst_openrc() {
+    local sv="$1"
+    if [ -f "${srcdir}/$sv".confd ]; then
+        install -Dm644 "${srcdir}/$sv".confd "${pkgdir}"/etc/conf.d/"$sv"
+    fi
+    if [ -f "${srcdir}/$sv".initd ]; then
+        install -Dm755 "${srcdir}/$sv".initd "${pkgdir}"/etc/init.d/"$sv"
+    fi
+}
+
+package() {
+    _inst_openrc "NAME"
+}

data/proto/PKGBUILD.runit.proto

@@ -0,0 +1,41 @@
+# Maintainer: Your Name <youremail@domain.com>
+
+pkgname=NAME-runit
+pkgver=VERSION
+pkgrel=1
+epoch=
+pkgdesc="Runit NAME init script"
+arch=('any')
+url="https://gitea.artixlinux.org/artixlinux/packages-runit"
+license=('GPL2')
+groups=()
+depends=("runit" "NAME")
+makedepends=()
+checkdepends=()
+optdepends=()
+provides=("init-NAME")
+conflicts=("init-NAME")
+replaces=()
+backup=()
+options=()
+install=
+changelog=
+source=(NAME.{run,finish,check})
+sha256sums=()
+
+_inst_runit() {
+    local sv="$1"
+    if [ -f "${srcdir}/$sv".conf ]; then
+        install -Dm644 "${srcdir}/$sv".conf "${pkgdir}"/etc/runit/sv/"$sv"/conf
+    fi
+
+    for f in run finish check; do
+        if [ -f "${srcdir}/$sv.$f" ]; then
+            install -Dm755 "${srcdir}/$sv.$f" "${pkgdir}"/etc/runit/sv/"$sv/$f"
+        fi
+    done
+}
+
+package() {
+    _inst_runit "NAME"
+}

data/proto/PKGBUILD.s6.proto

@@ -0,0 +1,39 @@
+# Maintainer: Your Name <youremail@domain.com>
+
+pkgname=NAME-s6
+pkgver=VERSION
+pkgrel=1
+epoch=
+pkgdesc="S6 NAME init script"
+arch=('any')
+url="https://gitea.artixlinux.org/artixlinux/packages-s6"
+license=('GPL2')
+groups=()
+depends=("s6-base" "NAME")
+makedepends=()
+checkdepends=()
+optdepends=()
+provides=("init-NAME")
+conflicts=("init-NAME")
+replaces=()
+backup=()
+options=()
+install=
+changelog=
+source=(NAME.{dependencies,down,up,type})
+sha256sums=()
+
+
+_inst_s6(){
+    local sv="$1"
+    for f in dependencies down type up; do
+        if [ -f "${srcdir}/$sv.$f" ]; then
+            install -Dm644 "${srcdir}/$sv.$f" "${pkgdir}"/etc/s6/sv/"$sv/$f"
+        fi
+    done
+}
+
+package() {
+    _inst_s6 "NAME"
+}
+

data/proto/PKGBUILD.suite66.proto

@@ -0,0 +1,34 @@
+# Maintainer: Your Name <youremail@domain.com>
+
+pkgname=NAME-66
+pkgver=VERSION
+pkgrel=1
+epoch=
+pkgdesc="Suite66 NAME init script"
+arch=('any')
+url="https://gitea.artixlinux.org/artixlinux/packages-66"
+license=('GPL2')
+groups=()
+depends=("suite66-base" "NAME")
+makedepends=()
+checkdepends=()
+optdepends=()
+provides=("init-NAME")
+conflicts=("init-NAME")
+replaces=()
+backup=()
+options=()
+install=
+changelog=
+source=(NAME)
+sha256sums=()
+
+_inst_66() {
+    local sv="$1"
+    install -Dm644 "$sv" -t "${pkgdir}"/etc/66/service
+}
+
+package() {
+    _inst_66 "NAME"
+}
+

lib/iso/calamares.sh

@@ -33,31 +33,7 @@ write_services_s6_conf(){
 
 write_services_66_conf(){
     local conf="$1"/services-66.conf
-    write_services_conf 'svDir' '/etc/66/service' 'dbDir' '/run/66/tree' > "$conf"
+    write_services_conf 'svDir' '/etc/66/service' 'runsvDir' '/var/lib/66/system' > "$conf"
-}
-
-write_postcfg(){
-    local yaml
-    yaml=$(write_yaml_header)
-    yaml+=$(write_yaml_map 0 'keyrings')
-    for k in archlinux artix;do
-        yaml+=$(write_yaml_seq 2 "$k")
-    done
-    yaml+=$(write_empty_line)
-    printf '%s' "${yaml}"
-}
-
-write_unpackfs() {
-    local yaml
-    yaml=$(write_yaml_header)
-    yaml+=$(write_yaml_map 0 'unpack')
-    local fs="squashfs"
-#     ${persist} && fs="ext4"
-    yaml+=$(write_yaml_seq_map 2 'source' '"/run/artix/bootmnt/LiveOS/rootfs.img"')
-    yaml+=$(write_yaml_map 4 'sourcefs' \'"$fs"\')
-    yaml+=$(write_yaml_map 4 'destination' '""')
-    yaml+=$(write_empty_line)
-    printf '%s' "${yaml}"
 }
 
 configure_calamares(){
@@ -65,8 +41,6 @@ configure_calamares(){
     if [[ -d "$mods" ]];then
         msg2 "Configuring: Calamares"
         write_services_"${INITSYS}"_conf "$mods"
-        write_postcfg > "$mods"/postcfg.conf
-        write_unpackfs > "$mods"/unpackfs.conf
         sed -e "s|services-openrc|services-${INITSYS}|" \
             -i "$1"/etc/calamares/settings.conf
     fi

lib/iso/services.sh

@@ -38,18 +38,17 @@ add_svc_s6(){
     local rlvl=/etc/s6/current
     # rebuild s6-linux-init binaries
     chroot "$mnt" rm -r "$rlvl"
-    chroot "$mnt" s6-linux-init-maker -1 -N -f /etc/s6/skel -G "/usr/bin/agetty -L -8 tty1 115200" -c "$rlvl" "$rlvl"
+    chroot "$mnt" s6-linux-init-maker -1 -N -f /etc/s6/skel -G "/usr/bin/agetty -L -8 tty7 115200" -c "$rlvl" "$rlvl"
     chroot "$mnt" mv "$rlvl"/bin/init "$rlvl"/bin/s6-init
     chroot "$mnt" cp -a "$rlvl"/bin /usr
 }
 
 add_svc_66(){
     local mnt="$1" names="$2"
-    chroot "$mnt" 66-tree -cnE root &>/dev/null
     for svc in $names; do
-        if [[ -f $mnt/etc/66/service/$svc ]]; then
+        if [[ -f "$mnt"/etc/66/service/"$svc" ]]; then
-            chroot "$mnt" 66-enable -t root $svc &>/dev/null
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
-            chroot "$mnt" 66-start -t root $svc &>/dev/null
+            chroot "$mnt" 66-enable -t default "$svc" &>/dev/null
         fi
     done
 }

lib/pkg/common.sh

@@ -0,0 +1,36 @@
+#!/hint/bash
+
+#{{{ common functions
+
+get_compliant_name(){
+    local gitname="$1"
+    case "$gitname" in
+        *+) gitname=${gitname//+/plus}
+    esac
+    echo "$gitname"
+}
+
+get_pkg_org(){
+    local pkg="$1" org sub
+    case ${pkg} in
+        ruby-*) org="packagesRuby" ;;
+        perl-*) org="packagesPerl" ;;
+        python-*|python2-*) org="packagesPython" ;;
+        *) sub=${pkg:0:1}; org="packages${sub^^}" ;;
+    esac
+    echo "$org"
+}
+
+api_put() {
+    curl -s -X PUT "$@"
+}
+
+api_delete() {
+    curl -s -X DELETE "$@"
+}
+
+api_post() {
+    curl -s -X POST "$@"
+}
+
+#}}}

lib/pkg/git.sh

@@ -2,59 +2,6 @@
 
 #{{{ git
 
-get_compliant_name(){
-    local gitname="$1"
-    case "$gitname" in
-        *+) gitname=${gitname//+/plus}
-    esac
-    echo "$gitname"
-}
-
-get_pkg_org(){
-    local pkg="$1" org sub
-    case ${pkg} in
-        ruby-*) org="packagesRuby" ;;
-        perl-*) org="packagesPerl" ;;
-        python-*|python2-*) org="packagesPython" ;;
-        *) sub=${pkg:0:1}; org="packages${sub^^}" ;;
-    esac
-    echo "$org"
-}
-
-get_team_id() {
-    local org="$1" team="$2"
-    local id
-    id=$(curl -s -X GET "${GIT_URL}/api/v1/orgs/$org/teams/search?q=$team&access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json" | jq '.data[] .id')
-    echo "$id"
-}
-
-add_repo_to_team() {
-    local pkg="$1" org="$2" team="$3"
-    local id
-    id=$(get_team_id "$org" "$team")
-    local gitname
-    gitname=$(get_compliant_name "$pkg")
-
-    msg2 "Adding package repo [%s] to team (%s)" "$gitname" "$team"
-
-    curl -s -X PUT "${GIT_URL}/api/v1/teams/$id/repos/$org/$gitname?access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json"
-}
-
-remove_repo_from_team() {
-    local pkg="$1" org="$2" team="$3"
-    local id
-    id=$(get_team_id "$org" "$team")
-    local gitname
-    gitname=$(get_compliant_name "$pkg")
-
-    msg2 "Removing package repo [%s] from team (%s)" "$gitname" "$team"
-
-    curl -s -X DELETE "${GIT_URL}/api/v1/teams/$id/repos/$org/$gitname?access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json"
-}
-
 get_local_head(){
     git log --pretty=%H ...refs/heads/master^ | head -n 1
 }

lib/pkg/gitea.sh

@@ -0,0 +1,31 @@
+#!/hint/bash
+
+#{{{ gitea api
+
+add_team_to_repo() {
+    local name="$1"
+    local org="$2"
+    local team="$3"
+    local url
+
+    url="${GIT_URL}/api/v1/repos/$org/$name/teams/$team?access_token=${GIT_TOKEN}"
+
+    msg2 "Adding team (%s) to package repo [%s]" "$team" "$name"
+
+    api_put "$url" -H  "accept: application/json"
+}
+
+remove_team_from_repo() {
+    local name="$1"
+    local org="$2"
+    local team="$3"
+    local url
+
+    url="${GIT_URL}/api/v1/repos/$org/$name/teams/$team?access_token=${GIT_TOKEN}"
+
+    msg2 "Removing team (%s) from package repo [%s]" "$team" "$name"
+
+    api_delete "$url" -H  "accept: application/json"
+}
+
+#}}}

lib/pkg/repo.sh

@@ -41,7 +41,7 @@ find_pkg(){
 tree_loop(){
     local func="$1" pkgs
     for tree in "${ARTIX_TREE[@]}"; do
-        pkgs=$(find "${TREE_DIR_ARTIX}/$tree" -name repos -o -name "$CARCH")
+        pkgs=$(find "${TREE_DIR_ARTIX}/$tree" -name repos -o -name "$CARCH" | sort)
         for _package in ${pkgs}; do
             "$func" "$_package"
         done

lib/util-pkg.sh

@@ -31,7 +31,7 @@ load_pkg_config(){
         python-{world,galaxy}
     )
 
-    local init_tree=(packages-{openrc,runit,s6})
+    local init_tree=(packages-{openrc,runit,s6,66})
 
     local desktop_tree=(
         packages-{kf5,plasma,kde,qt6}
@@ -61,7 +61,7 @@ load_pkg_config(){
 
     HOST_TREE_ARCH=${HOST_TREE_ARCH:-'https://github.com/archlinux'}
 
-    DBEXT=${DBEXT:-'xz'}
+    DBEXT=${DBEXT:-'gz'}
 
     return 0
 }