repare release

extracting the tarball was done from the wrong directory

Signed-off-by: Ionut Biru <ibiru@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>

.gitignore

@@ -0,0 +1,2 @@
+*~
+devtools-*.tar.gz

Makefile

@@ -1,28 +1,49 @@
+V=0.9.10
+
 all:
 
 install:
 	# commitpkg/checkpkg and friends
-	mkdir -p $(DESTDIR)/usr/bin
+	install -d -m755 $(DESTDIR)/usr/bin
 	install -m 755 checkpkg $(DESTDIR)/usr/bin
 	install -m 755 commitpkg $(DESTDIR)/usr/bin
 	ln -sf commitpkg $(DESTDIR)/usr/bin/extrapkg
 	ln -sf commitpkg $(DESTDIR)/usr/bin/corepkg
 	ln -sf commitpkg $(DESTDIR)/usr/bin/testingpkg
+	ln -sf commitpkg $(DESTDIR)/usr/bin/stagingpkg
 	ln -sf commitpkg $(DESTDIR)/usr/bin/communitypkg
 	ln -sf commitpkg $(DESTDIR)/usr/bin/community-testingpkg
+	ln -sf commitpkg $(DESTDIR)/usr/bin/community-stagingpkg
+	ln -sf commitpkg $(DESTDIR)/usr/bin/multilibpkg
 	# arch{co,release,rm}
 	install -m 755 archco $(DESTDIR)/usr/bin
 	install -m 755 communityco $(DESTDIR)/usr/bin
 	install -m 755 archrelease $(DESTDIR)/usr/bin
 	install -m 755 archrm $(DESTDIR)/usr/bin
 	# new chroot tools, only usable by root
-	mkdir -p $(DESTDIR)/usr/sbin
+	install -d -m 755 $(DESTDIR)/usr/sbin
 	install -m 755 mkarchroot $(DESTDIR)/usr/sbin
 	install -m 755 makechrootpkg $(DESTDIR)/usr/sbin
-	#Additional packaging helper scripts
+	install -m 755 archbuild $(DESTDIR)/usr/bin
+	ln -sf archbuild $(DESTDIR)/usr/bin/extra-i686-build
+	ln -sf archbuild $(DESTDIR)/usr/bin/extra-x86_64-build
+	ln -sf archbuild $(DESTDIR)/usr/bin/testing-i686-build
+	ln -sf archbuild $(DESTDIR)/usr/bin/testing-x86_64-build
+	ln -sf archbuild $(DESTDIR)/usr/bin/staging-i686-build
+	ln -sf archbuild $(DESTDIR)/usr/bin/staging-x86_64-build
+	ln -sf archbuild $(DESTDIR)/usr/bin/multilib-build
+	# Additional packaging helper scripts
 	install -m 755 lddd $(DESTDIR)/usr/bin
 	install -m 755 finddeps $(DESTDIR)/usr/bin
 	install -m 755 rebuildpkgs $(DESTDIR)/usr/bin
+	# install default config
+	install -d -m755 $(DESTDIR)/usr/share/devtools
+	install -m 644 makepkg-i686.conf $(DESTDIR)/usr/share/devtools
+	install -m 644 makepkg-x86_64.conf $(DESTDIR)/usr/share/devtools
+	install -m 644 pacman-extra.conf $(DESTDIR)/usr/share/devtools
+	install -m 644 pacman-testing.conf $(DESTDIR)/usr/share/devtools
+	install -m 644 pacman-staging.conf $(DESTDIR)/usr/share/devtools
+	install -m 644 pacman-multilib.conf $(DESTDIR)/usr/share/devtools
 
 uninstall:
 	# remove all files we installed
@@ -31,10 +52,20 @@ uninstall:
 	rm $(DESTDIR)/usr/bin/extrapkg
 	rm $(DESTDIR)/usr/bin/corepkg
 	rm $(DESTDIR)/usr/bin/testingpkg
+	rm $(DESTDIR)/usr/bin/stagingpkg
 	rm $(DESTDIR)/usr/bin/communitypkg
 	rm $(DESTDIR)/usr/bin/community-testingpkg
+	rm $(DESTDIR)/usr/bin/community-stagingpkg
+	rm $(DESTDIR)/usr/bin/multilibpkg
 	rm $(DESTDIR)/usr/sbin/mkarchroot
 	rm $(DESTDIR)/usr/sbin/makechrootpkg
+	rm $(DESTDIR)/usr/bin/extra-i686-build
+	rm $(DESTDIR)/usr/bin/extra-x86_64-build
+	rm $(DESTDIR)/usr/bin/testing-i686-build
+	rm $(DESTDIR)/usr/bin/testing-x86_64-build
+	rm $(DESTDIR)/usr/bin/staging-i686-build
+	rm $(DESTDIR)/usr/bin/staging-x86_64-build
+	rm $(DESTDIR)/usr/bin/multilib-build
 	rm $(DESTDIR)/usr/bin/lddd
 	rm $(DESTDIR)/usr/bin/finddeps
 	rm $(DESTDIR)/usr/bin/archco
@@ -42,3 +73,12 @@ uninstall:
 	rm $(DESTDIR)/usr/bin/archrm
 	rm $(DESTDIR)/usr/bin/communityco
 	rm $(DESTDIR)/usr/bin/rebuildpkgs
+	rm $(DESTDIR)/usr/share/devtools/makepkg-i686.conf
+	rm $(DESTDIR)/usr/share/devtools/makepkg-x86_64.conf
+	rm $(DESTDIR)/usr/share/devtools/pacman-extra.conf
+	rm $(DESTDIR)/usr/share/devtools/pacman-testing.conf
+	rm $(DESTDIR)/usr/share/devtools/pacman-staging.conf
+	rm $(DESTDIR)/usr/share/devtools/pacman-multilib.conf
+
+dist:
+	git archive --format=tar --prefix=devtools-$(V)/ $(V) | gzip -9 > devtools-$(V).tar.gz

archbuild

@@ -0,0 +1,51 @@
+#!/bin/bash
+
+cmd="$(basename "${0%-build}")"
+if [ "${cmd}" == 'multilib' ]; then
+	repo='multilib'
+	arch='x86_64'
+else
+	repo=${cmd%-*}
+	arch=${cmd#*-}
+fi
+chroots='/var/tmp/archbuild'
+clean_first=false
+
+usage() {
+	echo "usage $(basename "$0")"
+	echo '    -c         Recreate the chroot before building'
+	echo '    -r <dir>   Create chroots in this directory'
+	exit 1
+}
+
+while getopts 'cr:' arg; do
+	case "${arg}" in
+		c) clean_first=true ;;
+		r) chroots="$OPTARG" ;;
+		*) usage ;;
+	esac
+done
+
+if [ "$(uname -m)" == 'i686' -a "${arch}" != 'i686' ]; then
+	echo 'You can only build i686 packages on this system'
+	exit 1
+fi
+
+if [ "$(uname -m)" != 'x86_64' -a "${repo}" == 'multilib' ]; then
+	echo 'You can only build multilib packages on a x86_64 system'
+	exit 1
+fi
+
+if ${clean_first} || [ ! -d "${chroots}/${repo}-${arch}" ]; then
+	echo "Creating chroot for [${repo}] (${arch})..."
+	sudo rm -rf ${chroots}/${repo}-${arch}
+	sudo mkdir -p ${chroots}/${repo}-${arch}
+	setarch ${arch} sudo mkarchroot \
+		-C /usr/share/devtools/pacman-${repo}.conf \
+		-M /usr/share/devtools/makepkg-${arch}.conf \
+		${chroots}/${repo}-${arch}/root \
+		base base-devel sudo
+fi
+
+echo "Building in chroot for [${repo}] (${arch})..."
+setarch ${arch} sudo makechrootpkg -c -u -r ${chroots}/${repo}-${arch}

archco

@@ -1,10 +1,10 @@
 #!/bin/bash
 
-if [ "$1" = "" ]; then
+if [ "$1" = '' ]; then
-	echo "Usage: archco <package name> [<package name>]"
+	echo 'Usage: archco <package name> [<package name>]'
 	exit 1
 fi
 
 for i in "$@"; do
-     svn co svn+ssh://gerolde.archlinux.org/srv/svn-packages/$i
+	svn co svn+ssh://gerolde.archlinux.org/srv/svn-packages/$i
 done

archrelease

@@ -1,33 +1,33 @@
 #!/bin/bash
 
-if [ "$1" = "" ]; then
+abort() {
-    echo "Usage: archrelease <repo>"
+	echo ${1:-'archrelease: Cancelled'}
-    exit 1
+	exit 1
+}
+
+if [ "$1" = '' ]; then
+	abort 'Usage: archrelease <repo>'
 fi
 
 if [ ! -f PKGBUILD ]; then
-    echo "archrelease: PKGBUILD not found"
+	abort 'archrelease: PKGBUILD not found'
-    exit 1
 fi
 
-if [ "$(basename $(readlink -f .))" != "trunk" ]; then
+if [ "$(basename $(readlink -f .))" != 'trunk' ]; then
-    echo "archrelease: Not in a package trunk dir"
+	abort 'archrelease: Not in a package trunk dir'
-    exit 1
 fi
 
-if [ "$(svn diff)" != "" ]; then
+if [ ! -z "$(svn status -q)" ]; then
-    echo "archrelease: You have not committed your changes yet!"
+	abort 'archrelease: You have not committed your changes yet!'
-    echo "             Please run 'upgpkg' or 'svn commit' first"
-    exit 1
 fi
 
 echo -n 'releasing package...'
 pushd .. >/dev/null
-if [ -d repos/$1 ]; then
+if [ -d "repos/${1}" ]; then
-    svn rm --force -q repos/$1
+	svn rm --force -q "repos/${1}"
-    svn commit -q -m "archrelease: remove $1"
+	svn commit -q -m "archrelease: remove ${1}" || abort
 fi
-svn copy -q -r HEAD trunk repos/$1
+svn copy -q -r HEAD trunk "repos/${1}"
-svn commit -q -m "archrelease: copy trunk to $1"
+svn commit -q -m "archrelease: copy trunk to ${1}" || abort
 popd >/dev/null
 echo 'done'

archrm

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-if [ "$1" = "" ]; then
+if [ "$1" = '' ]; then
-	echo "Usage: archrm <path to checkout>"
+	echo 'Usage: archrm <path to checkout>'
 	exit 1
 fi
 

checkpkg

@@ -1,11 +1,11 @@
 #!/bin/bash
 
 # Source makepkg.conf; fail if it is not found
-if [ -r "/etc/makepkg.conf" ]; then
+if [ -r '/etc/makepkg.conf' ]; then
-	source "/etc/makepkg.conf"
+	source '/etc/makepkg.conf'
 else
-    echo "/etc/makepkg.conf not found!"
+	echo '/etc/makepkg.conf not found!'
-    exit 1
+	exit 1
 fi
 
 # Source user-specific makepkg.conf overrides
@@ -18,77 +18,81 @@ strip_url() {
 }
 
 if [ ! -f PKGBUILD ]; then
-	echo "This must be run in the directory of a built package."
+	echo 'This must be run in the directory of a built package.'
 	exit 1
 fi
 
-source PKGBUILD
+. PKGBUILD
-if [ "$arch" == "any" ]; then
+if [ "$arch" == 'any' ]; then
-    CARCH="any"
+	CARCH='any'
 fi
 
+STARTDIR=$(pwd)
+TEMPDIR=$(mktemp -d /tmp/checkpkg-script.XXXX)
+cd $TEMPDIR
+
 for _pkgname in ${pkgname[@]}; do
-    pkgfile=${_pkgname}-${pkgver}-${pkgrel}-${CARCH}${PKGEXT}
+	pkgfile=${_pkgname}-${pkgver}-${pkgrel}-${CARCH}${PKGEXT}
-    oldstylepkgfile=${_pkgname}-${pkgver}-${pkgrel}${PKGEXT}
+	oldstylepkgfile=${_pkgname}-${pkgver}-${pkgrel}${PKGEXT}
 
-    if [ -f "$(pwd)/$pkgfile" ]; then
+	if [ -f "$STARTDIR/$pkgfile" ]; then
-	pkgfile=$(pwd)/$pkgfile
+		cp "$STARTDIR/$pkgfile" .
-    elif [ -f "$PKGDEST/$pkgfile" ]; then
+	elif [ -f "$PKGDEST/$pkgfile" ]; then
-	pkgfile=$PKGDEST/$pkgfile
+		cp "$PKGDEST/$pkgfile" .
-    elif [ -f "$(pwd)/$oldstylepkgfile" ]; then
+	elif [ -f "$STARTDIR/$oldstylepkgfile" ]; then
-	pkgfile=$(pwd)/$oldstylepkgfile
+		cp "$STARTDIR/$oldstylepkgfile" .
-    elif [ -f "$PKGDEST/$oldstylepkgfile" ]; then
+	elif [ -f "$PKGDEST/$oldstylepkgfile" ]; then
-	pkgfile=$PKGDEST/$oldstylepkgfile
+		cp "$PKGDEST/$oldstylepkgfile" .
-    else
-	echo "File \"$pkgfile\" doesn't exist"
-	exit 1
-    fi
-
-    tmp=`pacman -Spd --noconfirm $_pkgname`
-
-    if [ $? -ne 0 ]; then
-	echo "Couldn't download previous package for $_pkgname."
-	exit 1
-    fi
-
-    pkgurl=`echo $tmp | rev | cut -d ' ' -f 1 | rev`
-
-    oldpkg=`strip_url $pkgurl`
-
-    if [ "$(basename $oldpkg)" = "$(basename $pkgfile)" ]; then
-	echo "The built package ($_pkgname) is the one in the repo right now!"
-	exit 1
-    fi
-
-    if [ ! -f $oldpkg ]; then
-	if echo $pkgurl | grep "^file:///" > /dev/null 2>&1; then
-	    cp `echo $pkgurl | sed 's#^file://##'` .
-	elif [ -f $PKGDEST/$oldpkg ]; then
-	    cp $PKGDEST/$oldpkg .
 	else
-	    wget --quiet $pkgurl
+		echo "File \"$pkgfile\" doesn't exist"
+		exit 1
 	fi
-    fi
 
-    bsdtar tf $oldpkg > filelist-$_pkgname-old
+	tmp=`pacman -Spd --noconfirm $_pkgname`
-    bsdtar tf "$pkgfile" > filelist-$_pkgname
 
-    sort -o filelist-$_pkgname filelist-$_pkgname
+	if [ $? -ne 0 ]; then
-    sort -o filelist-$_pkgname-old filelist-$_pkgname-old
+		echo "Couldn't download previous package for $_pkgname."
+		exit 1
+	fi
 
-    diff filelist-$_pkgname-old filelist-$_pkgname
+	pkgurl=`echo $tmp | rev | cut -d ' ' -f 1 | rev`
 
-    if diff filelist-$_pkgname-old filelist-$_pkgname | grep '\.so\.' > /dev/null 2>&1; then
+	oldpkg=`strip_url $pkgurl`
-	mkdir -p pkg
+
-	cd pkg
+	if [ "$(basename $oldpkg)" = "$(basename $pkgfile)" ]; then
-	bsdtar xf "$pkgfile" > /dev/null
+		echo "The built package ($_pkgname) is the one in the repo right now!"
-	for i in `diff ../filelist-$_pkgname-old ../filelist-$_pkgname | grep \> | grep \.so\. | awk '{print $2}'`; do
+		exit 1
-	    echo -n "${i}: "
+	fi
-	    objdump -p $i | grep SONAME
+
-	done
+	if [ ! -f $oldpkg ]; then
-    else
+		if echo $pkgurl | grep '^file:///' > /dev/null 2>&1; then
-	echo "No filename differences for $_pkgname."
+			cp `echo $pkgurl | sed 's#^file://##'` .
-    fi
+		elif [ -f $PKGDEST/$oldpkg ]; then
+			cp $PKGDEST/$oldpkg .
+		else
+			wget --quiet $pkgurl
+		fi
+	fi
+
+	bsdtar tf $oldpkg > filelist-$_pkgname-old
+	bsdtar tf "$pkgfile" > filelist-$_pkgname
+
+	sort -o filelist-$_pkgname filelist-$_pkgname
+	sort -o filelist-$_pkgname-old filelist-$_pkgname-old
+
+	diff filelist-$_pkgname-old filelist-$_pkgname
+
+	if diff filelist-$_pkgname-old filelist-$_pkgname | grep '\.so\.' > /dev/null 2>&1; then
+		mkdir -p pkg
+		cd pkg
+		bsdtar xf ../"$pkgfile" > /dev/null
+		for i in `diff ../filelist-$_pkgname-old ../filelist-$_pkgname | grep \> | grep \.so\. | awk '{print $2}'`; do
+			echo -n "${i}: "
+			objdump -p $i | grep SONAME
+		done
+	else
+		echo "No soname differences for $_pkgname."
+	fi
 done
 
-# vim:ft=sh:ts=4:sw=4:et:
+echo "Files saved to $TEMPDIR"

commitpkg

@@ -1,104 +1,134 @@
 #!/bin/bash
 
 abort() {
-    echo ${1:-"Cancelled"}
+	echo ${1:-'Cancelled'}
-    exit 1
+	exit 1
 }
 
+getpkgfile() {
+	if [[ ${#} -ne 1 ]]; then
+		echo 'ERROR: No canonical package found!' >&2
+		exit 1
+	elif [ ! -f "${1}" ]; then
+		echo "ERROR: Package ${1} not found!" >&2
+		exit 1
+	fi
+
+	echo ${1}
+}
 
 # Source makepkg.conf; fail if it is not found
-if [ -r "/etc/makepkg.conf" ]; then
+if [ -r '/etc/makepkg.conf' ]; then
-    source "/etc/makepkg.conf"
+	source '/etc/makepkg.conf'
 else
-    abort "/etc/makepkg.conf not found!"
+	abort '/etc/makepkg.conf not found!'
 fi
 
 # Source user-specific makepkg.conf overrides
 if [ -r ~/.makepkg.conf ]; then
-    source ~/.makepkg.conf
+	. ~/.makepkg.conf
 fi
 
 cmd=$(basename "$0")
 
 if [ ! -f PKGBUILD ]; then
-    abort "No PKGBUILD file"
+	abort 'No PKGBUILD file'
 fi
 
-source PKGBUILD
+. PKGBUILD
 pkgbase=${pkgbase:-$pkgname}
 
 # set up repo-specific opts depending on how we were called
-server="gerolde.archlinux.org"
+server='gerolde.archlinux.org'
-if [ "$cmd" == "extrapkg" ]; then
+if [ "$cmd" == 'extrapkg' ]; then
-    repo="extra"
+	repo='extra'
-elif [ "$cmd" == "corepkg" ]; then
+elif [ "$cmd" == 'corepkg' ]; then
-    repo="core"
+	repo='core'
-elif [ "$cmd" == "testingpkg" ]; then
+elif [ "$cmd" == 'testingpkg' ]; then
-    repo="testing"
+	repo='testing'
-elif [ "$cmd" == "communitypkg" ]; then
+elif [ "$cmd" == 'stagingpkg' ]; then
-    repo="community"
+	repo='staging'
-    server="aur.archlinux.org"
+elif [ "$cmd" == 'communitypkg' ]; then
-elif [ "$cmd" == "community-testingpkg" ]; then
+	repo='community'
-    repo="community-testing"
+	server='aur.archlinux.org'
-    server="aur.archlinux.org"
+elif [ "$cmd" == 'community-testingpkg' ]; then
+	repo='community-testing'
+	server='aur.archlinux.org'
+elif [ "$cmd" == 'community-stagingpkg' ]; then
+	repo='community-staging'
+	server='aur.archlinux.org'
+elif [ "$cmd" == 'multilibpkg' ]; then
+	repo='multilib'
+	server='aur.archlinux.org'
 else
-    if [ $# -eq 0 ]; then
+	if [ $# -eq 0 ]; then
-        abort "usage: commitpkg <reponame> [-l limit] [commit message]"
+		abort 'usage: commitpkg <reponame> [-l limit] [commit message]'
-    fi
+	fi
-    repo="$1"
+	repo="$1"
-    shift
+	shift
 fi
 
 # check if all local source files are under version control
-(for s in ${source[@]} $install; do
+(for s in ${source[@]}; do
-    echo $s | grep -vq '://' && \
+	echo $s | grep -vq '://' && \
-    svn status $s | grep -q '?' && \
+	svn status $s | grep -q '?' && \
-    abort "$s is not under version control"
+	abort "$s is not under version control"
+done) || true
+
+# check if changelog and install files are under version control
+(for i in 'changelog' 'install'; do
+	filelist=$(sed -n "s/^[[:space:]]*$i=//p" PKGBUILD)
+	for file in $filelist; do
+		# evaluate any bash variables used
+		eval file=${file}
+		if svn status ${file} | grep -q '?'; then
+			abort "${file} is not under version control"
+		fi
+	done
 done) || true
 
 # see if any limit options were passed, we'll send them to rsync
 unset rsyncopts
-if [ "$1" = "-l" ]; then
+if [ "$1" = '-l' ]; then
-    rsyncopts="--bwlimit=$2"
+	rsyncopts="--bwlimit=$2"
-    shift 2
+	shift 2
 fi
 
 echo -n 'committing changes to trunk...'
 if [ -n "$1" ]; then
-    svn commit -q -m "upgpkg: $pkgbase $pkgver-$pkgrel
+	svn commit -q -m "upgpkg: $pkgbase $pkgver-$pkgrel
 $1" || abort
 else
-    svn commit -q || abort
+	svn commit -q || abort
 fi
 echo 'done'
 
 for _arch in ${arch[@]}; do
-    for _pkgname in ${pkgname[@]}; do
+	for _pkgname in ${pkgname[@]}; do
-        pkgfile=$_pkgname-$pkgver-$pkgrel-${_arch}$PKGEXT
+		pkgfile=$(getpkgfile "$_pkgname-$pkgver-$pkgrel-${_arch}".pkg.tar.* 2>/dev/null)
+		pkgdestfile=$(getpkgfile "$PKGDEST/$_pkgname-$pkgver-$pkgrel-${_arch}".pkg.tar.* 2>/dev/null)
 
-        if [ ! -f $pkgfile -a -f "$PKGDEST/$pkgfile" ]; then
+		if [ ! -f "$pkgfile" -a -f "$pkgdestfile" ]; then
-            pkgfile="$PKGDEST/$pkgfile"
+			pkgfile="$pkgdestfile"
-        elif [ ! -f $pkgfile ]; then
+		elif [ ! -f "$pkgfile" ]; then
-            echo "skipping ${_arch}"
+			echo "skipping ${_arch}"
-            continue 2
+			continue 2
-        fi
+		fi
 
-        echo -n 'uploading '
+		echo -n 'uploading '
-        rsync -c -h --progress $rsyncopts "${pkgfile}" -e ssh $server:staging/$repo || abort
+		rsync -p --chmod 'ug=rw,o=r' -c -h -L --progress $rsyncopts --partial "${pkgfile}" -e ssh $server:staging/$repo || abort
-    done
+	done
-    archrelease $repo-${_arch} || abort
+	archrelease $repo-${_arch} || abort
 done
 
-if [ "${arch[*]}" == "any" ]; then
+if [ "${arch[*]}" == 'any' ]; then
-    if [ -d ../repos/$repo-i686 -a -d ../repos/$repo-x86_64 ]; then
+	if [ -d ../repos/$repo-i686 -a -d ../repos/$repo-x86_64 ]; then
-        pushd ../repos/ >/dev/null
+		pushd ../repos/ >/dev/null
-        echo -n "removing $repo-i686 and $repo-x86_64..."
+		echo "removing $repo-i686 and $repo-x86_64..."
-        svn rm $repo-i686
+		svn rm $repo-i686
-        svn rm $repo-x86_64
+		svn rm $repo-x86_64
-        svn commit -q -m "removed $repo-i686 and $repo-x86_64 for $pkgname"
+		svn commit -q -m "removed $repo-i686 and $repo-x86_64 for $pkgname"
-        echo 'done'
+		echo 'done'
-        popd >/dev/null
+		popd >/dev/null
-    fi
+	fi
 fi
-
-# vim:ft=sh:ts=4:sw=4:et:

communityco

@@ -1,10 +1,10 @@
 #!/bin/bash
 
-if [ "$1" = "" ]; then
+if [ "$1" = '' ]; then
-	echo "Usage: communityco <package name> [<package name>]"
+	echo 'Usage: communityco <package name> [<package name>]'
 	exit 1
 fi
 
 for i in "$@"; do
-     svn co svn+ssh://aur.archlinux.org/srv/svn-packages/$i
+	svn co svn+ssh://aur.archlinux.org/srv/svn-packages/$i
 done

finddeps

@@ -3,39 +3,37 @@
 # finddeps - find packages that depend on a given depname
 #
 
-if [ "$1" = "" ]; then
+if [ "$1" = '' ]; then
-    echo "usage: finddeps <depname>"
+	echo 'usage: finddeps <depname>'
-    echo ""
+	echo ''
-    echo "Find packages that depend on a given depname."
+	echo 'Find packages that depend on a given depname.'
-    echo "Run this script from the top-level directory of your ABS tree."
+	echo 'Run this script from the top-level directory of your ABS tree.'
-    echo ""
+	echo ''
-    exit 0
+	exit 0
 fi
 
 match=$1
 tld=$(pwd)
 
 for d in $(find . -type d); do
-    cd $d
+	cd $d
-    if [ -f PKGBUILD ]; then
+	if [ -f PKGBUILD ]; then
-        unset pkgname depends makedepends
+		unset pkgname depends makedepends
-        . PKGBUILD
+		. PKGBUILD
-        for dep in "${depends[@]}"; do
+		for dep in "${depends[@]}"; do
-            # lose the version comaparator, if any
+			# lose the version comaparator, if any
-            depname=${dep%%[<>=]*}
+			depname=${dep%%[<>=]*}
-            if [ "$depname" = "$match" ]; then
+			if [ "$depname" = "$match" ]; then
-                echo "$d (depends)"
+				echo "$d (depends)"
-            fi
+			fi
-        done
+		done
-        for dep in "${makedepends[@]}"; do
+		for dep in "${makedepends[@]}"; do
-            # lose the version comaparator, if any
+			# lose the version comaparator, if any
-            depname=${dep%%[<>=]*}
+			depname=${dep%%[<>=]*}
-            if [ "$depname" = "$match" ]; then
+			if [ "$depname" = "$match" ]; then
-                echo "$d (makedepends)"
+				echo "$d (makedepends)"
-            fi
+			fi
-        done
+		done
-    fi
+	fi
-    cd $tld
+	cd $tld
 done
-
-# vim:ft=sh:ts=4:sw=4:et:

lddd

@@ -6,42 +6,41 @@
 ifs=$IFS
 IFS=':'
 
-libdirs="/lib:/usr/lib:/opt/qt/lib:/opt/kde/lib:/usr/lib/libfakeroot:/opt/NX/lib"
+libdirs='/lib:/usr/lib:/opt/qt/lib:/opt/kde/lib:/usr/lib/libfakeroot:/opt/NX/lib'
 extras=
 
-TEMPDIR=$(mktemp /tmp/lddd-script.XXXX)
+TEMPDIR=$(mktemp -d /tmp/lddd-script.XXXX)
-rm $TEMPDIR
-mkdir -p $TEMPDIR
 
-echo " Go out and drink some tea, this will take a while :) ..."
+echo 'Go out and drink some tea, this will take a while :) ...'
 #  Check ELF binaries in the PATH and specified dir trees.
-for tree in $PATH $libdirs $extras
+for tree in $PATH $libdirs $extras; do
-do
+	echo DIR $tree
-    echo DIR $tree
 
-    #  Get list of files in tree.
+	#  Get list of files in tree.
-    files=$(find $tree -type f ! -name '*.a' ! -name '*.la' ! -name '*.py*' ! -name '*.txt' ! -name '*.h' ! -name '*.ttf' ! -name '*.rb' ! -name '*.ko' ! -name '*.pc' ! -name '*.enc' ! -name '*.cf' ! -name '*.def' ! -name '*.rules' ! -name '*.cmi' ! -name  '*.mli' ! -name '*.ml' ! -name '*.cma' ! -name '*.cmx' ! -name '*.cmxa' ! -name '*.pod' ! -name '*.pm' ! -name '*.pl' ! -name '*.al' ! -name '*.tcl' ! -name '*.bs' ! -name '*.o' ! -name '*.png' ! -name '*.gif' ! -name '*.cmo' ! -name '*.cgi' ! -name '*.defs' ! -name '*.conf' ! -name '*_LOCALE' ! -name 'Compose' ! -name '*_OBJS' ! -name '*.msg' ! -name '*.mcopclass' ! -name '*.mcoptype')
+	files=$(find $tree -type f ! -name '*.a' ! -name '*.la' ! -name '*.py*' ! -name '*.txt' ! -name '*.h' ! -name '*.ttf' ! \
-    IFS=$ifs
+	-name '*.rb' ! -name '*.ko' ! -name '*.pc' ! -name '*.enc' ! -name '*.cf' ! -name '*.def' ! -name '*.rules' ! -name \
-    for i in $files
+	'*.cmi' ! -name  '*.mli' ! -name '*.ml' ! -name '*.cma' ! -name '*.cmx' ! -name '*.cmxa' ! -name '*.pod' ! -name '*.pm' \
-    do
+	! -name '*.pl' ! -name '*.al' ! -name '*.tcl' ! -name '*.bs' ! -name '*.o' ! -name '*.png' ! -name '*.gif' ! -name '*.cmo' \
-        if [ `file $i | grep -c 'ELF'` -ne 0 ]; then
+	! -name '*.cgi' ! -name '*.defs' ! -name '*.conf' ! -name '*_LOCALE' ! -name 'Compose' ! -name '*_OBJS' ! -name '*.msg' ! \
-            #  Is an ELF binary.
+	-name '*.mcopclass' ! -name '*.mcoptype')
-            if [ `ldd $i 2>/dev/null | grep -c 'not found'` -ne 0 ]; then
+	IFS=$ifs
-                #  Missing lib.
+	for i in $files; do
-                echo "$i:" >> $TEMPDIR/raw.txt
+		if [ `file $i | grep -c 'ELF'` -ne 0 ]; then
-                ldd $i 2>/dev/null | grep 'not found' >> $TEMPDIR/raw.txt
+			#  Is an ELF binary.
-            fi
+			if [ `ldd $i 2>/dev/null | grep -c 'not found'` -ne 0 ]; then
-        fi
+				#  Missing lib.
-    done
+				echo "$i:" >> $TEMPDIR/raw.txt
+				ldd $i 2>/dev/null | grep 'not found' >> $TEMPDIR/raw.txt
+			fi
+		fi
+	done
 done
 grep '^/' $TEMPDIR/raw.txt | sed -e 's/://g' >> $TEMPDIR/affected-files.txt
 # invoke pacman
 for i in $(cat $TEMPDIR/affected-files.txt); do
-    pacman -Qo $i | awk '{print $4,$5}' >> $TEMPDIR/pacman.txt
+	pacman -Qo $i | awk '{print $4,$5}' >> $TEMPDIR/pacman.txt
 done
 # clean list
 sort -u $TEMPDIR/pacman.txt >> $TEMPDIR/possible-rebuilds.txt
 
 echo "Files saved to $TEMPDIR"
-
-# vim:ft=sh:ts=4:sw=4:et:

makechrootpkg

@@ -8,64 +8,63 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-FORCE="n"
+FORCE='n'
-RUN=""
+RUN=''
-MAKEPKG_ARGS="-sr"
+MAKEPKG_ARGS='-s --noconfirm'
-REPACK=""
+REPACK=''
-COPY="copy"
+COPY='copy'
 WORKDIR=$PWD
 
-update_first="0"
+update_first='0'
-clean_first="0"
+clean_first='0'
-install_pkg=""
+install_pkg=''
 add_to_db=0
 
-chrootdir=""
+chrootdir=''
 
 APPNAME=$(basename "${0}")
 
-usage ()
+usage() {
-{
+	echo "usage ${APPNAME} [options] -r <chrootdir> [--] [makepkg args]"
-    echo "usage ${APPNAME} [options] -r <chrootdir> [--] [makepkg args]"
+	echo ' Run this script in a PKGBUILD dir to build a package inside a'
-    echo " Run this script in a PKGBUILD dir to build a package inside a"
+	echo ' clean chroot. All unrecognized arguments passed to this script'
-    echo " clean chroot. All unrecognized arguments passed to this script"
+	echo ' will be passed to makepkg.'
-    echo " will be passed to makepkg."
+	echo ''
-    echo ""
+	echo ' The chroot dir consists of the following directories:'
-    echo " The chroot dir consists of the following directories:"
+	echo ' <chrootdir>/{root, copy} but only "root" is required'
-    echo " <chrootdir>/{root, copy} but only 'root' is required"
+	echo ' by default. The working copy will be created as needed'
-    echo " by default. The working copy will be created as needed"
+	echo ''
-    echo ""
+	echo 'The chroot "root" directory must be created via the following'
-    echo "The chroot 'root' directory must be created via the following"
+	echo 'command:'
-    echo "command:"
+	echo '    mkarchroot <chrootdir>/root base base-devel sudo'
-    echo "    mkarchroot <chrootdir>/root base base-devel sudo"
+	echo ''
-    echo ""
+	echo "Default makepkg args: $MAKEPKG_ARGS"
-    echo "Default makepkg args: $MAKEPKG_ARGS"
+	echo ''
-    echo ""
+	echo 'Flags:'
-    echo "Flags:"
+	echo '-h         This help'
-    echo "-h         This help"
+	echo '-c         Clean the chroot before building'
-    echo "-c         Clean the chroot before building"
+	echo '-u         Update the working copy of the chroot before building'
-    echo "-u         Update the working copy of the chroot before building"
+	echo '           This is useful for rebuilds without dirtying the pristine'
-    echo "           This is useful for rebuilds without dirtying the pristine"
+	echo '           chroot'
-    echo "           chroot"
+	echo '-d         Add the package to a local db at /repo after building'
-    echo "-d         Add the package to a local db at /repo after building"
+	echo '-r <dir>   The chroot dir to use'
-    echo "-r <dir>   The chroot dir to use"
+	echo '-I <pkg>   Install a package into the working copy of the chroot'
-    echo "-I <pkg>   Install a package into the working copy of the chroot"
+	echo '-l <copy>  The directory to use as the working copy of the chroot'
-    echo "-l <copy>  The directory to use as the working copy of the chroot"
+	echo '           Useful for maintain multiple copies Default: copy'
-    echo "           Useful for maintain multiple copies Default: copy"
+	exit 1
-    exit 1
 }
 
 while getopts 'hcudr:I:l:' arg; do
-    case "${arg}" in
+	case "${arg}" in
-        h) usage ;;
+		h) usage ;;
-        c) clean_first=1 ;;
+		c) clean_first=1 ;;
-        u) update_first=1 ;;
+		u) update_first=1 ;;
-        d) add_to_db=1 ;;
+		d) add_to_db=1 ;;
-        r) chrootdir="$OPTARG" ;;
+		r) chrootdir="$OPTARG" ;;
-        I) install_pkg="$OPTARG" ;;
+		I) install_pkg="$OPTARG" ;;
-        l) COPY="$OPTARG" ;;
+		l) COPY="$OPTARG" ;;
-        *) MAKEPKG_ARGS="$MAKEPKG_ARGS -$arg $OPTARG" ;;
+		*) MAKEPKG_ARGS="$MAKEPKG_ARGS -$arg $OPTARG" ;;
-    esac
+	esac
 done
 
 #Get rid of trailing / in chrootdir
@@ -77,174 +76,186 @@ MAKEPKG_ARGS="$MAKEPKG_ARGS ${*:$OPTIND}"
 
 # See if -R was passed to makepkg
 for arg in ${*:$OPTIND}; do
-    if [ "$arg" = "-R" ]; then
+	if [ "$arg" = '-R' ]; then
-        REPACK=1
+		REPACK=1
-        break;
+		break;
-    fi
+	fi
 done
 
-if [ "$EUID" != "0" ]; then
+if [ "$EUID" != '0' ]; then
-    echo "This script must be run as root."
+	echo 'This script must be run as root.'
-    exit 1
+	exit 1
 fi
 
 if [ ! -f PKGBUILD ]; then
-    echo "This must be run in a directory containing a PKGBUILD."
+	echo 'This must be run in a directory containing a PKGBUILD.'
-    exit 1
+	exit 1
 fi
-source PKGBUILD
 
 if [ ! -d "$chrootdir" ]; then
-    echo "No chroot dir defined, or invalid path '$chrootdir'"
+	echo "No chroot dir defined, or invalid path '$chrootdir'"
-    exit 1
+	exit 1
 fi
 
 if [ ! -d "$chrootdir/root" ]; then
-    echo "Missing chroot dir root directory."
+	echo 'Missing chroot dir root directory.'
-    echo "Try using: mkarchroot $chrootdir/root base base-devel sudo"
+	echo "Try using: mkarchroot $chrootdir/root base base-devel sudo"
-    usage
+	usage
 fi
 
-umask 000
+umask 0022
 if [ ! -d "$copydir" -o "$clean_first" -eq "1" ]; then
-    echo -n 'creating clean working copy...'
+	echo -n 'creating clean working copy...'
-    mkdir -p "$copydir"
+	mkdir -p "$copydir"
-    rsync -a --delete -q -W -x "$chrootdir/root/" "$copydir"
+	rsync -a --delete -q -W -x "$chrootdir/root/" "$copydir"
-    echo 'done'
+	echo 'done'
 fi
 
 if [ -n "$install_pkg" ]; then
-    pkgname="$(basename "$install_pkg")"
+	pkgname="$(basename "$install_pkg")"
-    cp "$install_pkg" "$copydir/$pkgname"
+	cp "$install_pkg" "$copydir/$pkgname"
-    mkarchroot -r "pacman -U /$pkgname" "$copydir"
+	mkarchroot -r "pacman -U /$pkgname" "$copydir"
-    ret=$?
+	ret=$?
-    rm "$copydir/$pkgname"
+	rm "$copydir/$pkgname"
-    #exit early, we've done all we need to
+	#exit early, we've done all we need to
-    exit $ret
+	exit $ret
 fi
 
 if [ $update_first -eq 1 ]; then
-    mkarchroot -r "pacman -Syu --noconfirm" "$copydir"
+	mkarchroot -u "$copydir"
 fi
 
 [ -d "$copydir/build" ] || mkdir "$copydir/build"
 
 if [ "$REPACK" != "1" ]; then
-    #Remove anything in there UNLESS -R (repack) was passed to makepkg
+	#Remove anything in there UNLESS -R (repack) was passed to makepkg
-    rm -rf "$copydir/build/"*
+	rm -rf "$copydir/build/"*
+fi
+
+# read .makpekg.conf even if called via sudo
+if [ -n "${SUDO_USER}" ]; then
+	makepkg_conf="/$(eval echo ~${SUDO_USER})/.makepkg.conf"
+else
+	makepkg_conf="~/.makepkg.conf"
 fi
 
 # Get SRC/PKGDEST from makepkg.conf
-SRCDEST=$(grep '^SRCDEST=' /etc/makepkg.conf | cut -d= -f2)
+if [ -f "${makepkg_conf}" ]; then
-PKGDEST=$(grep '^PKGDEST=' /etc/makepkg.conf | cut -d= -f2)
+	eval $(grep '^SRCDEST=' "${makepkg_conf}")
+	eval $(grep '^PKGDEST=' "${makepkg_conf}")
+
+	eval $(grep '^MAKEFLAGS=' "${makepkg_conf}")
+	eval $(grep '^PACKAGER=' "${makepkg_conf}")
+fi
+[ -z "${SRCDEST}" ] && eval $(grep '^SRCDEST=' /etc/makepkg.conf)
+[ -z "${PKGDEST}" ] && eval $(grep '^PKGDEST=' /etc/makepkg.conf)
 
 [ -d "$copydir/pkgdest" ] || mkdir "$copydir/pkgdest"
-if ! grep "PKGDEST=/pkgdest" "$copydir/etc/makepkg.conf" >/dev/null 2>&1; then
+if ! grep 'PKGDEST="/pkgdest"' "$copydir/etc/makepkg.conf" >/dev/null 2>&1; then
-    echo "PKGDEST=/pkgdest" >> "$copydir/etc/makepkg.conf"
+	echo 'PKGDEST="/pkgdest"' >> "$copydir/etc/makepkg.conf"
 fi
 
 [ -d "$copydir/srcdest" ] || mkdir "$copydir/srcdest"
-if ! grep "SRCDEST=/srcdest" "$copydir/etc/makepkg.conf" >/dev/null 2>&1; then
+if ! grep 'SRCDEST="/srcdest"' "$copydir/etc/makepkg.conf" >/dev/null 2>&1; then
-    echo "SRCDEST=/srcdest" >> "$copydir/etc/makepkg.conf"
+	echo 'SRCDEST="/srcdest"' >> "$copydir/etc/makepkg.conf"
 fi
+[ -z "${MAKEFLAGS}" ] && eval $(grep '^MAKEFLAGS=' /etc/makepkg.conf)
+[ -n "${MAKEFLAGS}" ] && echo "MAKEFLAGS='${MAKEFLAGS}'" >> "$copydir/etc/makepkg.conf"
+[ -z "${PACKAGER}" ] && eval $(grep '^PACKAGER=' /etc/makepkg.conf)
+[ -n "${PACKAGER}" ] && echo "PACKAGER='${PACKAGER}'" >> "$copydir/etc/makepkg.conf"
 
+# Set target CARCH as it might be used within the PKGBUILD to select correct sources
+eval $(grep '^CARCH=' "$copydir/etc/makepkg.conf")
+export CARCH
 # Copy PKGBUILD and sources
-source PKGBUILD
+source=($(. PKGBUILD; echo ${source[@]}))
 cp PKGBUILD "$copydir/build/"
 for f in ${source[@]}; do
-    basef=$(echo $f | sed 's|::.*||' | sed 's|^.*://.*/||g')
+	basef=$(echo $f | sed 's|::.*||' | sed 's|^.*://.*/||g')
-    if [ -f "$basef" ]; then
+	if [ -f "$basef" ]; then
-        cp "$basef" "$copydir/srcdest/"
+		cp "$basef" "$copydir/srcdest/"
-    elif [ -f "$SRCDEST/$basef" ]; then
+	elif [ -f "$SRCDEST/$basef" ]; then
-        cp "$SRCDEST/$basef" "$copydir/srcdest/"
+		cp "$SRCDEST/$basef" "$copydir/srcdest/"
-    fi
+	fi
 done
 
-install_files=$(grep "install=" PKGBUILD)
+( . PKGBUILD
-for pkg in ${pkgname[@]}; do
+for i in 'changelog' 'install'; do
-    install_files+=' '
+	filelist=$(sed -n "s/^[[:space:]]*$i=//p" PKGBUILD)
-    install_files+=$(echo $install_files |sed "s/\$pkgname/$pkg/"|sed "s/\${pkgname}/$pkg/")
+	for file in $filelist; do
-    install_files=$(eval echo $install_files |tr '[:blank:]' '\n'|sort |uniq)
+		# evaluate any bash variables used
+		eval file=${file}
+		if [[ -f "$file" ]]; then
+			cp "$file" "$copydir/build/"
+		fi
+	done
 done
-
+)
-for f in $install_files;do
-    install="${f#"install="}"
-    if [ "$install" != "" -a -f "$install" ]; then
-        cp "$install" "$copydir/build/"
-    fi
-done
-
-if [ -f "ChangeLog" ]; then
-    cp ChangeLog "$copydir/build/"
-fi
 
 chown -R nobody "$copydir/build"
 chown -R nobody "$copydir/srcdest"
 chown -R nobody "$copydir/pkgdest"
 
 if ! grep "^nobody" "$copydir/etc/sudoers" >/dev/null 2>&1; then
-    touch "$copydir/etc/sudoers"
+	touch "$copydir/etc/sudoers"
-    echo "nobody	ALL=(ALL) NOPASSWD: ALL" >> "$copydir/etc/sudoers"
+	echo 'nobody	ALL=(ALL) NOPASSWD: ALL' >> "$copydir/etc/sudoers"
-    chmod 440 "$copydir/etc/sudoers"
+	chmod 440 "$copydir/etc/sudoers"
 fi
 
 #This is a little gross, but this way the script is recreated every time in the
 #working copy
 (cat <<EOF
 #!/bin/bash
-export LANG=$LOCALE
+export LANG=C
 cd /build
 export HOME=/build
 sudo -u nobody makepkg $MAKEPKG_ARGS || touch BUILD_FAILED
 [ -f BUILD_FAILED ] && exit 1
-which namcap &>/dev/null && namcap /build/PKGBUILD /pkgdest/*${PKGEXT} > /pkgdest/namcap.log
+which namcap &>/dev/null && namcap /build/PKGBUILD /pkgdest/*.pkg.tar.* > /build/namcap.log
 exit 0
 EOF
 ) > "$copydir/chrootbuild"
 chmod +x "$copydir/chrootbuild"
 
 if mkarchroot -r "/chrootbuild" "$copydir"; then
-    for pkgfile in "${copydir}"/pkgdest/*${PKGEXT}; do
+	for pkgfile in "${copydir}"/pkgdest/*.pkg.tar.*; do
-        [ -e "$pkgfile" ] || continue
+		[ -e "$pkgfile" ] || continue
-        _pkgname=$(basename "$pkgfile")
+		if [ "$add_to_db" -eq "1" ]; then
-        if [ "$add_to_db" -eq "1" ]; then
+			mkdir -p "${copydir}/repo"
-                [ -d "${copydir}/repo" ] || mkdir -p "${copydir}/repo"
+			pushd "${copydir}/repo" >/dev/null
-                pushd "${copydir}/repo" >/dev/null
+			cp "$pkgfile" .
-                cp "$pkgfile" .
+			repo-add repo.db.tar.gz "$(basename "$pkgfile")"
-                repo-add repo.db.tar.gz "$_pkgname"
+			popd >/dev/null
-                popd >/dev/null
+		fi
-        fi
 
-        if [ -d "$PKGDEST" ]; then
+		if [ -d "$PKGDEST" ]; then
-            mv "$pkgfile" "${PKGDEST}"
+			mv "$pkgfile" "${PKGDEST}"
-        else
+		else
-            mv "$pkgfile" "${WORKDIR}"
+			mv "$pkgfile" "${WORKDIR}"
-        fi
+		fi
-    done
+	done
 
-    for f in "${copydir}"/srcdest/*; do
+	for l in "${copydir}"/build/{namcap,*-{build,package}}.log; do
-        [ -e "$f" ] || continue
+		[ -f "$l" ] && mv "$l" "${WORKDIR}"
-        if [ -d "$SRCDEST" ]; then
+	done
-            mv "$f" "${SRCDEST}"
-        else
-            mv "$f" "${WORKDIR}"
-        fi
-    done
-
-    for l in "${copydir}"/build/*-{build,package}.log; do
-        [ -f "$l" ] && mv "$l" "${WORKDIR}"
-    done
 else
-    #just in case. We returned 1, make sure we fail
+	#just in case. We returned 1, make sure we fail
-    touch "${copydir}/build/BUILD_FAILED"
+	touch "${copydir}/build/BUILD_FAILED"
 fi
 
+for f in "${copydir}"/srcdest/*; do
+	[ -e "$f" ] || continue
+	if [ -d "$SRCDEST" ]; then
+		mv "$f" "${SRCDEST}"
+	else
+		mv "$f" "${WORKDIR}"
+	fi
+done
+
 if [ -e "${copydir}/build/BUILD_FAILED" ]; then
-    echo "Build failed, check $copydir/build"
+	echo "Build failed, check $copydir/build"
-    rm "${copydir}/build/BUILD_FAILED"
+	rm "${copydir}/build/BUILD_FAILED"
+	exit 1
 else
-    rm -rf "${copydir}"/build/*
+	rm -rf "${copydir}"/build/*
-fi	
+fi
-
-
-# vim:ft=sh:ts=4:sw=4:et:

makepkg-i686.conf

@@ -0,0 +1,115 @@
+#
+# /etc/makepkg.conf
+#
+
+#########################################################################
+# SOURCE ACQUISITION
+#########################################################################
+#
+#-- The download utilities that makepkg should use to acquire sources
+#  Format: 'protocol::agent'
+DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
+          'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
+          'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
+          'rsync::/usr/bin/rsync -z %u %o'
+          'scp::/usr/bin/scp -C %u %o')
+
+# Other common tools:
+# /usr/bin/snarf
+# /usr/bin/lftpget -c
+# /usr/bin/curl
+
+#########################################################################
+# ARCHITECTURE, COMPILE FLAGS
+#########################################################################
+#
+CARCH="i686"
+CHOST="i686-pc-linux-gnu"
+
+#-- Exclusive: will only run on i686
+# -march (or -mcpu) builds exclusively for an architecture
+# -mtune optimizes for an architecture, but builds for whole processor family
+CFLAGS="-march=i686 -mtune=generic -O2 -pipe"
+CXXFLAGS="-march=i686 -mtune=generic -O2 -pipe"
+LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
+#-- Make Flags: change this for DistCC/SMP systems
+#MAKEFLAGS="-j2"
+
+#########################################################################
+# BUILD ENVIRONMENT
+#########################################################################
+#
+# Defaults: BUILDENV=(fakeroot !distcc color !ccache)
+#  A negated environment option will do the opposite of the comments below.
+#
+#-- fakeroot: Allow building packages as a non-root user
+#-- distcc:   Use the Distributed C/C++/ObjC compiler
+#-- color:    Colorize output messages
+#-- ccache:   Use ccache to cache compilation
+#
+BUILDENV=(fakeroot !distcc color !ccache)
+#
+#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
+#-- specify a space-delimited list of hosts running in the DistCC cluster.
+#DISTCC_HOSTS=""
+
+#########################################################################
+# GLOBAL PACKAGE OPTIONS
+#   These are default values for the options=() settings
+#########################################################################
+#
+# Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
+#  A negated option will do the opposite of the comments below.
+#
+#-- strip:     Strip symbols from binaries/libraries in STRIP_DIRS
+#-- docs:      Save doc directories specified by DOC_DIRS
+#-- libtool:   Leave libtool (.la) files in packages
+#-- emptydirs: Leave empty directories in packages
+#-- zipman:    Compress manual (man and info) pages in MAN_DIRS with gzip
+#-- purge:     Remove files specified by PURGE_TARGETS
+#
+OPTIONS=(strip docs libtool emptydirs zipman purge)
+
+#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
+INTEGRITY_CHECK=(md5)
+#-- Options to be used when stripping binaries. See `man strip' for details.
+STRIP_BINARIES="--strip-all"
+#-- Options to be used when stripping shared libraries. See `man strip' for details.
+STRIP_SHARED="--strip-unneeded"
+#-- Options to be used when stripping static libraries. See `man strip' for details.
+STRIP_STATIC="--strip-debug"
+#-- Manual (man and info) directories to compress (if zipman is specified)
+MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
+#-- Doc directories to remove (if !docs is specified)
+DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
+#-- Directories to be searched for the strip option (if strip is specified)
+STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
+#-- Files to be removed from all packages (if purge is specified)
+PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
+
+#########################################################################
+# PACKAGE OUTPUT
+#########################################################################
+#
+# Default: put built package and cached source in build directory
+#
+#-- Destination: specify a fixed directory where all packages will be placed
+#PKGDEST=/home/packages
+#-- Source cache: specify a fixed directory where source files will be cached
+#SRCDEST=/home/sources
+#-- Source packages: specify a fixed directory where all src packages will be placed
+#SRCPKGDEST=/home/srcpackages
+#-- Packager: name/email of the person or organization building packages
+#PACKAGER="John Doe <john@doe.com>"
+
+#########################################################################
+# EXTENSION DEFAULTS
+#########################################################################
+#
+# WARNING: Do NOT modify these variables unless you know what you are
+#          doing.
+#
+PKGEXT='.pkg.tar.xz'
+SRCEXT='.src.tar.gz'
+
+# vim: set ft=sh ts=2 sw=2 et:

makepkg-x86_64.conf

@@ -0,0 +1,115 @@
+#
+# /etc/makepkg.conf
+#
+
+#########################################################################
+# SOURCE ACQUISITION
+#########################################################################
+#
+#-- The download utilities that makepkg should use to acquire sources
+#  Format: 'protocol::agent'
+DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
+          'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
+          'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
+          'rsync::/usr/bin/rsync -z %u %o'
+          'scp::/usr/bin/scp -C %u %o')
+
+# Other common tools:
+# /usr/bin/snarf
+# /usr/bin/lftpget -c
+# /usr/bin/curl
+
+#########################################################################
+# ARCHITECTURE, COMPILE FLAGS
+#########################################################################
+#
+CARCH="x86_64"
+CHOST="x86_64-unknown-linux-gnu"
+
+#-- Exclusive: will only run on x86_64
+# -march (or -mcpu) builds exclusively for an architecture
+# -mtune optimizes for an architecture, but builds for whole processor family
+CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
+CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
+LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
+#-- Make Flags: change this for DistCC/SMP systems
+#MAKEFLAGS="-j2"
+
+#########################################################################
+# BUILD ENVIRONMENT
+#########################################################################
+#
+# Defaults: BUILDENV=(fakeroot !distcc color !ccache)
+#  A negated environment option will do the opposite of the comments below.
+#
+#-- fakeroot: Allow building packages as a non-root user
+#-- distcc:   Use the Distributed C/C++/ObjC compiler
+#-- color:    Colorize output messages
+#-- ccache:   Use ccache to cache compilation
+#
+BUILDENV=(fakeroot !distcc color !ccache)
+#
+#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
+#-- specify a space-delimited list of hosts running in the DistCC cluster.
+#DISTCC_HOSTS=""
+
+#########################################################################
+# GLOBAL PACKAGE OPTIONS
+#   These are default values for the options=() settings
+#########################################################################
+#
+# Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
+#  A negated option will do the opposite of the comments below.
+#
+#-- strip:     Strip symbols from binaries/libraries in STRIP_DIRS
+#-- docs:      Save doc directories specified by DOC_DIRS
+#-- libtool:   Leave libtool (.la) files in packages
+#-- emptydirs: Leave empty directories in packages
+#-- zipman:    Compress manual (man and info) pages in MAN_DIRS with gzip
+#-- purge:     Remove files specified by PURGE_TARGETS
+#
+OPTIONS=(strip docs libtool emptydirs zipman purge)
+
+#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
+INTEGRITY_CHECK=(md5)
+#-- Options to be used when stripping binaries. See `man strip' for details.
+STRIP_BINARIES="--strip-all"
+#-- Options to be used when stripping shared libraries. See `man strip' for details.
+STRIP_SHARED="--strip-unneeded"
+#-- Options to be used when stripping static libraries. See `man strip' for details.
+STRIP_STATIC="--strip-debug"
+#-- Manual (man and info) directories to compress (if zipman is specified)
+MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
+#-- Doc directories to remove (if !docs is specified)
+DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
+#-- Directories to be searched for the strip option (if strip is specified)
+STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
+#-- Files to be removed from all packages (if purge is specified)
+PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
+
+#########################################################################
+# PACKAGE OUTPUT
+#########################################################################
+#
+# Default: put built package and cached source in build directory
+#
+#-- Destination: specify a fixed directory where all packages will be placed
+#PKGDEST=/home/packages
+#-- Source cache: specify a fixed directory where source files will be cached
+#SRCDEST=/home/sources
+#-- Source packages: specify a fixed directory where all src packages will be placed
+#SRCPKGDEST=/home/srcpackages
+#-- Packager: name/email of the person or organization building packages
+#PACKAGER="John Doe <john@doe.com>"
+
+#########################################################################
+# EXTENSION DEFAULTS
+#########################################################################
+#
+# WARNING: Do NOT modify these variables unless you know what you are
+#          doing.
+#
+PKGEXT='.pkg.tar.xz'
+SRCEXT='.src.tar.gz'
+
+# vim: set ft=sh ts=2 sw=2 et:

mkarchroot

@@ -8,169 +8,191 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-FORCE="n"
+FORCE='n'
-RUN=""
+RUN=''
-NOCOPY="n"
+NOCOPY='n'
 
-working_dir=""
+working_dir=''
-cache_dir=$((grep -m 1 '^CacheDir' /etc/pacman.conf || echo 'CacheDir = /var/cache/pacman/pkg') | sed 's/CacheDir\s*=\s*//')
 
 APPNAME=$(basename "${0}")
 
 # usage: usage <exitvalue>
-usage ()
+usage() {
-{
+	echo "usage ${APPNAME} [options] working-dir [package-list | app]"
-    echo "usage ${APPNAME} [options] working-dir [package-list | app]"
+	echo ' options:'
-    echo " options:"
+	echo '    -r <app>      Run "app" within the context of the chroot'
-    echo "    -r <app>      Run 'app' within the context of the chroot"
+	echo '    -u            Update the chroot via pacman'
-    echo "    -u            Update the chroot via pacman"
+	echo '    -f            Force overwrite of files in the working-dir'
-    echo "    -f            Force overwrite of files in the working-dir"
+	echo '    -C <file>     Location of a pacman config file'
-    echo "    -C <file>     Location of a pacman config file"
+	echo '    -M <file>     Location of a makepkg config file'
-    echo "    -M <file>     Location of a makepkg config file"
+	echo '    -n            Do not copy config files into the chroot'
-    echo "    -n            Do not copy config files into the chroot"
+	echo "    -c <dir>      Set pacman cache. Default: /var/cache/pacman/pkg"
-    echo "    -c <dir>      Set pacman cache. Default: ${cache_dir}"
+	echo '    -h            This message'
-    echo "    -h            This message"
+	exit $1
-    exit $1
 }
 
 while getopts 'r:ufnhC:M:c:' arg; do
-    case "${arg}" in
+	case "${arg}" in
-        r) RUN="$OPTARG" ;;
+		r) RUN="$OPTARG" ;;
-        u) RUN="pacman -Syu" ;;
+		u) RUN='pacman -Syu --noconfirm' ;;
-        f) FORCE="y" ;;
+		f) FORCE='y' ;;
-        C) pac_conf="$OPTARG" ;;
+		C) pac_conf="$OPTARG" ;;
-        M) makepkg_conf="$OPTARG" ;;
+		M) makepkg_conf="$OPTARG" ;;
-        n) NOCOPY="y" ;;
+		n) NOCOPY='y' ;;
-        c) cache_dir="$OPTARG" ;;
+		c) cache_dir="$OPTARG" ;;
-        h|?) usage 0 ;;
+		h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
+		*) echo "invalid argument '${arg}'"; usage 1 ;;
-    esac
+	esac
 done
 
-if [ "$EUID" != "0" ]; then
+if [ "$EUID" != '0' ]; then
-    echo "error: this script must be run as root."
+	echo 'error: this script must be run as root.'
-    exit 1
+	exit 1
 fi
 
 shift $(($OPTIND - 1))
 
-if [ "$RUN" = "" -a $# -lt 2 ]; then
+if [ "$RUN" = '' -a $# -lt 2 ]; then
-    echo "you must specify a directory and one or more packages"
+	echo 'you must specify a directory and one or more packages'
-    usage 1
+	usage 1
 elif [ $# -lt 1 ]; then
-    echo "you must specify a directory"
+	echo 'you must specify a directory'
-    usage 1
+	usage 1
 fi
 
 working_dir="$(readlink -f ${1})"
 shift 1
 
-[ "${working_dir}" = "" ] && echo "error: please specify a working directory" && usage 1
+[ "${working_dir}" = '' ] && echo 'error: please specify a working directory' && usage 1
+
+if [ -z "$cache_dir" ]; then
+	cache_conf=${working_dir}/etc/pacman.conf
+	[ ! -f $cache_conf ] && cache_conf=${pac_conf:-/etc/pacman.conf}
+	cache_dir=$((grep -m 1 '^CacheDir' $cache_conf || echo 'CacheDir = /var/cache/pacman/pkg') | sed 's/CacheDir\s*=\s*//')
+	unset cache_conf
+fi
+
+if [ -f /etc/pacman.d/mirrorlist ]; then
+	host_mirror=$(grep -v '^#' -m1 /etc/pacman.d/mirrorlist | sed -E 's#/os/(i686|x86_64)#/os/\$arch#g')
+fi
+if [ -z "${host_mirror}" ]; then
+	host_mirror='Server = http://mirrors.kernel.org/archlinux/$repo/os/$arch'
+fi
+if echo "${host_mirror}" | grep -q 'file://'; then
+	host_mirror_path=$(echo "${host_mirror}" | sed -E 's#Server\s=\sfile://(/.*)/\$repo/os/(\$arch|i686|x86_64)#\1#g')
+fi
 
 # {{{ functions 
 
-chroot_mount ()
+chroot_mount() {
-{
+	[ -e "${working_dir}/sys" ] || mkdir "${working_dir}/sys"
-    [ -e "${working_dir}/sys" ] || mkdir "${working_dir}/sys"
+	mount -t sysfs sysfs "${working_dir}/sys"
-    mount -t sysfs sysfs "${working_dir}/sys"
 
-    [ -e "${working_dir}/proc" ] || mkdir "${working_dir}/proc"
+	[ -e "${working_dir}/proc" ] || mkdir "${working_dir}/proc"
-    mount -t proc proc "${working_dir}/proc"
+	mount -t proc proc "${working_dir}/proc"
 
-    [ -e "${working_dir}/dev" ] || mkdir "${working_dir}/dev"
+	[ -e "${working_dir}/dev" ] || mkdir "${working_dir}/dev"
-    mount -o bind /dev "${working_dir}/dev"
+	mount -o bind /dev "${working_dir}/dev"
 
-    [ -e "${working_dir}/var/cache/pacman/pkg" ] || mkdir -p "${working_dir}/var/cache/pacman/pkg"
+	[ -e "${working_dir}/dev/shm" ] || mkdir "${working_dir}/dev/shm"
-    [ -e "${cache_dir}" ] || mkdir -p "${cache_dir}"
+	mount -t tmpfs shm "${working_dir}/dev/shm"
-    mount -o bind "${cache_dir}" "${working_dir}/var/cache/pacman/pkg"
 
-    trap 'chroot_umount' 0 1 2 15
+	[ -e "${working_dir}/dev/pts" ] || mkdir "${working_dir}/dev/pts"
+	mount -t devpts devpts "${working_dir}/dev/pts"
+
+	[ -e "${cache_dir}" ] || mkdir -p "${cache_dir}"
+	[ -e "${working_dir}/${cache_dir}" ] || mkdir -p "${working_dir}/${cache_dir}"
+	mount -o bind "${cache_dir}" "${working_dir}/${cache_dir}"
+
+	if [ -n "${host_mirror_path}" ]; then
+		[ -e "${working_dir}/${host_mirror_path}" ] || mkdir -p "${working_dir}/${host_mirror_path}"
+		mount -o bind "${host_mirror_path}" "${working_dir}/${host_mirror_path}"
+		mount -o remount,ro,bind "${host_mirror_path}" "${working_dir}/${host_mirror_path}"
+	fi
+
+	trap 'chroot_umount' 0 1 2 15
 }
 
-copy_hostconf ()
+copy_hostconf () {
-{
+	chroot "${working_dir}" /bin/findmnt -rnu -o SOURCE,TARGET,FSTYPE,OPTIONS > "${working_dir}/etc/mtab"
-    cp /etc/mtab "${working_dir}/etc/mtab"
+	cp /etc/resolv.conf "${working_dir}/etc/resolv.conf"
-    cp /etc/resolv.conf "${working_dir}/etc/resolv.conf"
+	echo "${host_mirror}" > ${working_dir}/etc/pacman.d/mirrorlist
-
 }
 
-chroot_umount ()
+chroot_umount () {
-{
+	umount "${working_dir}/proc"
-    umount "${working_dir}/proc"
+	umount "${working_dir}/sys"
-    umount "${working_dir}/sys"
+	umount "${working_dir}/dev/pts"
-    umount "${working_dir}/dev"
+	umount "${working_dir}/dev/shm"
-    umount "${working_dir}/var/cache/pacman/pkg"
+	umount "${working_dir}/dev"
+	umount "${working_dir}/${cache_dir}"
+	[ -n "${host_mirror_path}" ] && umount "${working_dir}/${host_mirror_path}"
 }
 # }}}
 
-umask 000
+umask 0022
 if [ "$RUN" != "" ]; then
-    # run chroot {{{
+	# run chroot {{{
-    #Sanity check
+	#Sanity check
-    if [ ! -f "${working_dir}/.arch-chroot" ]; then
+	if [ ! -f "${working_dir}/.arch-chroot" ]; then
-        echo "error: '${working_dir}' does not appear to be a Arch chroot"
+		echo "error: '${working_dir}' does not appear to be a Arch chroot"
-        echo "  please build the image using mkarchroot"
+		echo '       please build the image using mkarchroot'
-        exit 1
+		exit 1
-    fi
+	fi
 
-    chroot_mount
+	chroot_mount
-    copy_hostconf
+	copy_hostconf
 
-    chroot "${working_dir}" ${RUN}
+	chroot "${working_dir}" ${RUN}
 
-    # }}}
+	# }}}
-else
+	else
-    # {{{ build chroot
+	# {{{ build chroot
-    if [ -e "${working_dir}" -a "${FORCE}" = "n" ]; then
+	if [ -e "${working_dir}" -a "${FORCE}" = "n" ]; then
-        echo "error: working dir '${working_dir}' already exists - try using -f"
+		echo "error: working dir '${working_dir}' already exists - try using -f"
-        exit 1
+		exit 1
-    fi
+	fi
 
-    mkdir -p "${working_dir}/var/lib/pacman/"
+	mkdir -p "${working_dir}/var/lib/pacman/"
-    mkdir -p "${working_dir}/etc/"
+	mkdir -p "${working_dir}/etc/"
 
-    chroot_mount
+	chroot_mount
 
-    pacargs="--noconfirm -v " #--noprogressbar -v
+	pacargs="--noconfirm --root=${working_dir} --cachedir=${cache_dir}"
-    pacargs="$pacargs --root=${working_dir}"
+	if [ "$pac_conf" != "" ]; then
-    # pacman takes these as relative to the given root
+		pacargs="$pacargs --config=${pac_conf}"
-    pacargs="$pacargs --cachedir=/var/cache/pacman/pkg"
+	fi
-    if [ "$pac_conf" != "" ]; then
-        pacargs="$pacargs --config=${pac_conf}"
-    fi
 
-    if [ $# -ne 0 ]; then
+	if [ $# -ne 0 ]; then
-        op="-Sy"
+		op='-Sy'
-        if [ "$FORCE" = "y" ]; then
+		if [ "$FORCE" = "y" ]; then
-            op="${op}f"
+			op="${op}f"
-        fi
+		fi
-        if ! pacman ${op} ${pacargs} $@; then
+		if ! pacman ${op} ${pacargs} $@; then
-            echo "error: failed to install all packages"
+			echo 'error: failed to install all packages'
-            exit 1
+			exit 1
-        fi
+		fi
-    fi
+	fi
 
-    if [ -d "${working_dir}/lib/modules" ]; then
+	if [ -d "${working_dir}/lib/modules" ]; then
-        ldconfig -r "${working_dir}"
+		ldconfig -r "${working_dir}"
-    fi
+	fi
 
-    if [ "$pac_conf" != "" -a "$NOCOPY" = "n" ]; then
+	if [ "$pac_conf" != "" -a "$NOCOPY" = "n" ]; then
-        cp ${pac_conf} ${working_dir}/etc/pacman.conf
+		cp ${pac_conf} ${working_dir}/etc/pacman.conf
-    fi
+	fi
 
-    if [ "$makepkg_conf" != "" -a "$NOCOPY" = "n" ]; then
+	if [ "$makepkg_conf" != "" -a "$NOCOPY" = "n" ]; then
-        cp ${makepkg_conf} ${working_dir}/etc/makepkg.conf
+		cp ${makepkg_conf} ${working_dir}/etc/makepkg.conf
-    fi
+	fi
 
-    if [ -e "${working_dir}/etc/locale.gen" ]; then
+	if [ -e "${working_dir}/etc/locale.gen" ]; then
-        cp /etc/locale.gen "${working_dir}/etc/locale.gen"
+		echo -e 'en_US.UTF-8 UTF-8\nde_DE.UTF-8 UTF-8' > "${working_dir}/etc/locale.gen"
-        chroot "${working_dir}" locale-gen
+		chroot "${working_dir}" locale-gen
-    fi
+	fi
 
-    if [ ! -e "${working_dir}/.arch-chroot" ]; then
+	if [ ! -e "${working_dir}/.arch-chroot" ]; then
-        date +%s > "${working_dir}/.arch-chroot"
+		date +%s > "${working_dir}/.arch-chroot"
-    fi
+	fi
-    # }}}
+	# }}}
 fi
-
-# vim:ft=sh:ts=4:sw=4:et:

pacman-extra.conf

@@ -0,0 +1,84 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+HoldPkg     = pacman glibc
+# If upgrades are available for these packages they will be asked for first
+SyncFirst   = pacman
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#XferCommand = /usr/bin/curl -C - %u > %o
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options (all disabled by default)
+#UseSyslog
+#ShowSize
+#UseDelta
+#TotalDownload
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+## Add your preferred servers here, they will be used first
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+## Add your preferred servers here, they will be used first
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#Server = file:///home/custompkgs
+

pacman-multilib.conf

@@ -0,0 +1,88 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+HoldPkg     = pacman glibc
+# If upgrades are available for these packages they will be asked for first
+SyncFirst   = pacman
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#XferCommand = /usr/bin/curl -C - %u > %o
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options (all disabled by default)
+#UseSyslog
+#ShowSize
+#UseDelta
+#TotalDownload
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+## Add your preferred servers here, they will be used first
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+## Add your preferred servers here, they will be used first
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#Server = file:///home/custompkgs
+

pacman-staging.conf

@@ -0,0 +1,92 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+HoldPkg     = pacman glibc
+# If upgrades are available for these packages they will be asked for first
+SyncFirst   = pacman
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#XferCommand = /usr/bin/curl -C - %u > %o
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options (all disabled by default)
+#UseSyslog
+#ShowSize
+#UseDelta
+#TotalDownload
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[staging]
+## Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[testing]
+## Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[core]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[community-staging]
+## Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[community-testing]
+## Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[community]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#Server = file:///home/custompkgs
+

pacman-testing.conf

@@ -0,0 +1,84 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+HoldPkg     = pacman glibc
+# If upgrades are available for these packages they will be asked for first
+SyncFirst   = pacman
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#XferCommand = /usr/bin/curl -C - %u > %o
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options (all disabled by default)
+#UseSyslog
+#ShowSize
+#UseDelta
+#TotalDownload
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[testing]
+## Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[core]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[community-testing]
+## Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+[community]
+# Add your preferred servers here, they will be used first
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#Server = file:///home/custompkgs
+

rebuildpkgs

@@ -10,48 +10,48 @@
 # TODO make this work for community too
 
 if [ $# -le 1 ]; then
-    echo "usage: $(basename $0) <chrootdir> <packages to rebuild>"
+	echo "usage: $(basename $0) <chrootdir> <packages to rebuild>"
-    echo "  example: $(basename $0) ~/chroot readline bash foo bar baz"
+	echo "  example: $(basename $0) ~/chroot readline bash foo bar baz"
-    exit 1
+	exit 1
 fi
 
 # Source makepkg.conf; fail if it is not found
-if [ -r "/etc/makepkg.conf" ]; then
+if [ -r '/etc/makepkg.conf' ]; then
-	source "/etc/makepkg.conf"
+	source '/etc/makepkg.conf'
 else
-    echo "/etc/makepkg.conf not found!"
+	echo '/etc/makepkg.conf not found!'
-    exit 1
+	exit 1
 fi
 
 die () {
-    echo $@ >&2
+	echo $@ >&2
-    exit 1
+	exit 1
 }
 
-bump_pkgrel () {
+bump_pkgrel() {
-    # Get the current pkgrel from SVN and update the working copy with it
+	# Get the current pkgrel from SVN and update the working copy with it
-    # This prevents us from incrementing out of control :)
+	# This prevents us from incrementing out of control :)
-    pbuild=".svn/text-base/PKGBUILD.svn-base"
+	pbuild='.svn/text-base/PKGBUILD.svn-base'
-    oldrel=$(grep "pkgrel=" $pbuild | cut -d= -f2)
+	oldrel=$(grep 'pkgrel=' $pbuild | cut -d= -f2)
 
-    #remove decimals
+	#remove decimals
-    rel=$(echo $oldrel | cut -d. -f1)
+	rel=$(echo $oldrel | cut -d. -f1)
-    
-    newrel=$(($rel + 1))
 
-    sed -i "s/pkgrel=$oldrel/pkgrel=$newrel/" PKGBUILD 
+	newrel=$(($rel + 1))
+
+	sed -i "s/pkgrel=$oldrel/pkgrel=$newrel/" PKGBUILD
 }
 
-pkg_from_pkgbuild () {
+pkg_from_pkgbuild() {
-    # we want the sourcing to be done in a subshell so we don't pollute our current namespace
+	# we want the sourcing to be done in a subshell so we don't pollute our current namespace
-    export CARCH PKGEXT
+	export CARCH PKGEXT
-    (. PKGBUILD; echo "$pkgname-$pkgver-$pkgrel-$CARCH$PKGEXT")
+	(source PKGBUILD; echo "$pkgname-$pkgver-$pkgrel-$CARCH$PKGEXT")
 }
 
 chrootdir="$1"; shift
 pkgs="$@"
 
-SVNPATH="svn+ssh://gerolde.archlinux.org/srv/svn-packages"
+SVNPATH='svn+ssh://gerolde.archlinux.org/srv/svn-packages'
 
 echo ":: Work will be done in $(pwd)/rebuilds"
 
@@ -63,39 +63,39 @@ cd "$REBUILD_ROOT"
 
 FAILED=""
 for pkg in $pkgs; do
-    cd "$REBUILD_ROOT/svn-packages"
+	cd "$REBUILD_ROOT/svn-packages"
 
-    echo ":: Building '$pkg'"
+	echo ":: Building '$pkg'"
-    /usr/bin/svn update "$pkg"
+	/usr/bin/svn update "$pkg"
-    if [ ! -d "$pkg/trunk" ]; then
+	if [ ! -d "$pkg/trunk" ]; then
-        FAILED="$FAILED $pkg"
+		FAILED="$FAILED $pkg"
-        echo ":: $pkg does not exist in SVN"
+		echo ":: $pkg does not exist in SVN"
-        continue
+		continue
-    fi
+	fi
-    cd "$pkg/trunk/"
+	cd "$pkg/trunk/"
 
-    bump_pkgrel
+	bump_pkgrel
 
-    if ! sudo makechrootpkg -u -d -r "$chrootdir" -- --noconfirm; then
+	if ! sudo makechrootpkg -u -d -r "$chrootdir" -- --noconfirm; then
-        FAILED="$FAILED $pkg"
+		FAILED="$FAILED $pkg"
-        echo ":: $pkg Failed!"
+		echo ":: $pkg Failed!"
-    else
+	else
-        pkgfile=$(pkg_from_pkgbuild)
+		pkgfile=$(pkg_from_pkgbuild)
-        if [ -e "$pkgfile" ]; then
+		if [ -e "$pkgfile" ]; then
-            echo ":: $pkg Complete"
+			echo ":: $pkg Complete"
-        else
+		else
-            FAILED="$FAILED $pkg"
+			FAILED="$FAILED $pkg"
-            echo ":: $pkg Failed, no package built!"
+			echo ":: $pkg Failed, no package built!"
-        fi
+		fi
-    fi
+	fi
 done
 
 cd "$REBUILD_ROOT"
 if [ "$FAILED" != "" ]; then
-    echo "Packages failed:"
+	echo 'Packages failed:'
-    for pkg in $FAILED; do
+	for pkg in $FAILED; do
-        echo -e "\t$pkg"
+		echo -e "\t$pkg"
-    done
+	done
 fi
 
-echo "SVN pkgbumps in svn-packages/ - commit when ready"
+echo 'SVN pkgbumps in svn-packages/ - commit when ready'