This is 20160527.1

This makes it a lot easier to swap out the host that actually serves the repos in the future.

Makefile

@@ -1,4 +1,4 @@
-V=20150606
+V=20160527.1
 
 PREFIX = /usr/local
 
@@ -112,6 +112,7 @@ dist:
 	gpg --detach-sign --use-agent devtools-$(V).tar.gz
 
 upload:
-	scp devtools-$(V).tar.gz devtools-$(V).tar.gz.sig nymeria.archlinux.org:/srv/ftp/other/devtools/
+	scp devtools-$(V).tar.gz devtools-$(V).tar.gz.sig repos.archlinux.org:/srv/ftp/other/devtools/
 
 .PHONY: all clean install uninstall dist upload
+

arch-nspawn.in

@@ -96,7 +96,7 @@ copy_hostconf
 
 eval $(grep '^CARCH=' "$working_dir/etc/makepkg.conf")
 
-exec ${CARCH:+setarch "$CARCH"} systemd-nspawn 2>/dev/null \
+exec ${CARCH:+setarch "$CARCH"} systemd-nspawn -q \
 	-D "$working_dir" \
 	--register=no \
 	"${mount_args[@]}" \

archco.in

@@ -11,9 +11,9 @@ fi
 
 case $scriptname in
 	archco)
-		SVNURL="svn+ssh://svn-packages@nymeria.archlinux.org/srv/repos/svn-packages/svn";;
+		SVNURL="svn+ssh://svn-packages@repos.archlinux.org/srv/repos/svn-packages/svn";;
 	communityco)
-		SVNURL="svn+ssh://svn-community@nymeria.archlinux.org/srv/repos/svn-community/svn";;
+		SVNURL="svn+ssh://svn-community@repos.archlinux.org/srv/repos/svn-community/svn";;
 	*)
 		die "Couldn't find svn url for %s" "$scriptname"
 		;;

commitpkg.in

@@ -92,7 +92,7 @@ for _arch in ${arch[@]}; do
 done
 
 if [[ -z $server ]]; then
-	server='nymeria.archlinux.org'
+	server='repos.archlinux.org'
 fi
 
 if [[ -n $(svn status -q) ]]; then

crossrepomove.in

@@ -29,7 +29,7 @@ case $scriptname in
 		;;
 esac
 
-server='nymeria.archlinux.org'
+server='repos.archlinux.org'
 source_svn="svn+ssh://svn-${source_name}@${server}/srv/repos/svn-${source_name}/svn"
 target_svn="svn+ssh://svn-${target_name}@${server}/srv/repos/svn-${target_name}/svn"
 source_dbscripts="/srv/repos/svn-${source_name}/dbscripts"

makechrootpkg.in

@@ -189,7 +189,7 @@ prepare_chroot() {
 	# We can't use useradd without chrooting, otherwise it invokes PAM modules
 	# which we might not be able to load (i.e. when building i686 packages on
 	# an x86_64 host).
-	printf 'builduser:x:%d:100:builduser:/:/usr/bin/nologin\n' "$builduser_uid" >>"$copydir/etc/passwd"
+	printf 'builduser:x:%d:100:builduser:/build:/bin/bash\n' "$builduser_uid" >>"$copydir/etc/passwd"
 	chown -R "$builduser_uid" "$copydir"/{build,pkgdest,srcpkgdest,logdest,srcdest,startdir}
 
 	if [[ -n $MAKEFLAGS ]]; then

makepkg-i686.conf

@@ -19,7 +19,7 @@ DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %
 # /usr/bin/lftpget -c
 # /usr/bin/wget
 
-#-- The the package required by makepkg to download VCS sources
+#-- The package required by makepkg to download VCS sources
 #  Format: 'protocol::package'
 VCSCLIENTS=('bzr::bzr'
             'git::git'
@@ -37,8 +37,8 @@ CHOST="i686-pc-linux-gnu"
 # -march (or -mcpu) builds exclusively for an architecture
 # -mtune optimizes for an architecture, but builds for whole processor family
 CPPFLAGS="-D_FORTIFY_SOURCE=2"
-CFLAGS="-march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4"
+CFLAGS="-march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong"
-CXXFLAGS="-march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4"
+CXXFLAGS="-march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong"
 LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
@@ -50,17 +50,16 @@ DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
 # BUILD ENVIRONMENT
 #########################################################################
 #
-# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
+# Defaults: BUILDENV=(!distcc color !ccache check !sign)
 #  A negated environment option will do the opposite of the comments below.
 #
-#-- fakeroot: Allow building packages as a non-root user
 #-- distcc:   Use the Distributed C/C++/ObjC compiler
 #-- color:    Colorize output messages
 #-- ccache:   Use ccache to cache compilation
 #-- check:    Run the check() function if present in the PKGBUILD
 #-- sign:     Generate PGP signature file
 #
-BUILDENV=(fakeroot !distcc color !ccache check !sign)
+BUILDENV=(!distcc color !ccache check !sign)
 #
 #-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
 #-- specify a space-delimited list of hosts running in the DistCC cluster.
@@ -74,7 +73,7 @@ BUILDENV=(fakeroot !distcc color !ccache check !sign)
 #   These are default values for the options=() settings
 #########################################################################
 #
-# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
+# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !optipng !upx !debug)
 #  A negated option will do the opposite of the comments below.
 #
 #-- strip:      Strip symbols from binaries/libraries
@@ -85,9 +84,10 @@ BUILDENV=(fakeroot !distcc color !ccache check !sign)
 #-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
 #-- purge:      Remove files specified by PURGE_TARGETS
 #-- upx:        Compress binary executable files using UPX
+#-- optipng:    Optimize PNG images with optipng
 #-- debug:      Add debugging flags as specified in DEBUG_* variables
 #
-OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !optipng !upx !debug)
 
 #-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
 INTEGRITY_CHECK=(md5)

makepkg-x86_64.conf

@@ -19,7 +19,7 @@ DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %
 # /usr/bin/lftpget -c
 # /usr/bin/wget
 
-#-- The the package required by makepkg to download VCS sources
+#-- The package required by makepkg to download VCS sources
 #  Format: 'protocol::package'
 VCSCLIENTS=('bzr::bzr'
             'git::git'
@@ -37,8 +37,8 @@ CHOST="x86_64-unknown-linux-gnu"
 # -march (or -mcpu) builds exclusively for an architecture
 # -mtune optimizes for an architecture, but builds for whole processor family
 CPPFLAGS="-D_FORTIFY_SOURCE=2"
-CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4"
+CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong"
-CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4"
+CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong"
 LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
@@ -50,17 +50,16 @@ DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
 # BUILD ENVIRONMENT
 #########################################################################
 #
-# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
+# Defaults: BUILDENV=(!distcc color !ccache check !sign)
 #  A negated environment option will do the opposite of the comments below.
 #
-#-- fakeroot: Allow building packages as a non-root user
 #-- distcc:   Use the Distributed C/C++/ObjC compiler
 #-- color:    Colorize output messages
 #-- ccache:   Use ccache to cache compilation
 #-- check:    Run the check() function if present in the PKGBUILD
 #-- sign:     Generate PGP signature file
 #
-BUILDENV=(fakeroot !distcc color !ccache check !sign)
+BUILDENV=(!distcc color !ccache check !sign)
 #
 #-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
 #-- specify a space-delimited list of hosts running in the DistCC cluster.
@@ -74,7 +73,7 @@ BUILDENV=(fakeroot !distcc color !ccache check !sign)
 #   These are default values for the options=() settings
 #########################################################################
 #
-# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
+# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !optipng !upx !debug)
 #  A negated option will do the opposite of the comments below.
 #
 #-- strip:      Strip symbols from binaries/libraries
@@ -85,9 +84,10 @@ BUILDENV=(fakeroot !distcc color !ccache check !sign)
 #-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
 #-- purge:      Remove files specified by PURGE_TARGETS
 #-- upx:        Compress binary executable files using UPX
+#-- optipng:    Optimize PNG images with optipng
 #-- debug:      Add debugging flags as specified in DEBUG_* variables
 #
-OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !optipng !upx !debug)
 
 #-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
 INTEGRITY_CHECK=(md5)

mkarchroot.in

@@ -75,6 +75,8 @@ printf '%s.UTF-8 UTF-8\n' en_US de_DE > "$working_dir/etc/locale.gen"
 echo 'LANG=C' > "$working_dir/etc/locale.conf"
 echo "$CHROOT_VERSION" > "$working_dir/.arch-chroot"
 
+systemd-machine-id-setup --root="$working_dir"
+
 exec arch-nspawn \
 	${pac_conf:+-C "$pac_conf"} \
 	${makepkg_conf:+-M "$makepkg_conf"} \

pacman-extra.conf

@@ -14,6 +14,7 @@
 #CacheDir    = /var/cache/pacman/pkg/
 #LogFile     = /var/log/pacman.log
 #GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
 #XferCommand = /usr/bin/curl -C - -f %u > %o
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u

pacman-gnome-unstable.conf

@@ -14,6 +14,7 @@
 #CacheDir    = /var/cache/pacman/pkg/
 #LogFile     = /var/log/pacman.log
 #GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
 #XferCommand = /usr/bin/curl -C - -f %u > %o
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
@@ -72,6 +73,9 @@ LocalFileSigLevel = Optional
 [gnome-unstable]
 Include = /etc/pacman.d/mirrorlist
 
+[staging]
+Include = /etc/pacman.d/mirrorlist
+
 [testing]
 Include = /etc/pacman.d/mirrorlist
 
@@ -81,6 +85,9 @@ Include = /etc/pacman.d/mirrorlist
 [extra]
 Include = /etc/pacman.d/mirrorlist
 
+[community-staging]
+Include = /etc/pacman.d/mirrorlist
+
 [community-testing]
 Include = /etc/pacman.d/mirrorlist
 

pacman-kde-unstable.conf

@@ -14,6 +14,7 @@
 #CacheDir    = /var/cache/pacman/pkg/
 #LogFile     = /var/log/pacman.log
 #GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
 #XferCommand = /usr/bin/curl -C - -f %u > %o
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u

pacman-multilib-staging.conf

@@ -14,6 +14,7 @@
 #CacheDir    = /var/cache/pacman/pkg/
 #LogFile     = /var/log/pacman.log
 #GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
 #XferCommand = /usr/bin/curl -C - -f %u > %o
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u

pacman-multilib-testing.conf

@@ -14,6 +14,7 @@
 #CacheDir    = /var/cache/pacman/pkg/
 #LogFile     = /var/log/pacman.log
 #GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
 #XferCommand = /usr/bin/curl -C - -f %u > %o
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u

pacman-multilib.conf

@@ -14,6 +14,7 @@
 #CacheDir    = /var/cache/pacman/pkg/
 #LogFile     = /var/log/pacman.log
 #GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
 #XferCommand = /usr/bin/curl -C - -f %u > %o
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u

pacman-staging.conf

@@ -14,6 +14,7 @@
 #CacheDir    = /var/cache/pacman/pkg/
 #LogFile     = /var/log/pacman.log
 #GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
 #XferCommand = /usr/bin/curl -C - -f %u > %o
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u

pacman-testing.conf

@@ -14,6 +14,7 @@
 #CacheDir    = /var/cache/pacman/pkg/
 #LogFile     = /var/log/pacman.log
 #GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
 #XferCommand = /usr/bin/curl -C - -f %u > %o
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u

rebuildpkgs.in

@@ -47,7 +47,7 @@ pkg_from_pkgbuild() {
 chrootdir="$1"; shift
 pkgs="$@"
 
-SVNPATH='svn+ssh://nymeria.archlinux.org/srv/repos/svn-packages/svn'
+SVNPATH='svn+ssh://repos.archlinux.org/srv/repos/svn-packages/svn'
 
 msg "Work will be done in $(pwd)/rebuilds"