PoC: build offline support

Since commit 1d433f6 ("feat(db): confirm list of all packages that will be removed") packages need confirmation by default when being dropped from the db. If we make it to the DB drop phase the package already is pushed to the AUR, so it is safe to remove from the database and not removing it would create a somewhat broken state, so we assume that the package should unconditionally be removed from the db.

Component: pkgctl aur drop-from-repo
Signed-off-by: Christian Heusel <christian@heusel.eu>

.editorconfig

@@ -0,0 +1,15 @@
+# EditorConfig configuration for devtools
+# https://editorconfig.org
+
+# Top-most EditorConfig file
+root = true
+
+# Unix-style newlines without trailing whitespaces, but with a newline
+# ending every file, utf-8 charset, set indent to tabs
+[*]
+end_of_line = lf
+insert_final_newline = true
+trim_trailing_whitespace = true
+charset = utf-8
+indent_style = tab
+tab_width = 4

Makefile

@@ -1,6 +1,6 @@
 SHELL=/bin/bash -o pipefail
 
-V=1.2.0
+V=1.2.1
 BUILDTOOLVER ?= $(V)
 
 PREFIX = /usr/local

contrib/completion/bash/devtools.in

@@ -27,6 +27,7 @@ _makechrootpkg_args=(
 	-I
 	-l
 	-n
+	-t
 	-T
 	-U
 	-x
@@ -36,6 +37,7 @@ _makechrootpkg_args_D_opts() { _filedir -d; }
 _makechrootpkg_args_r_opts() { _filedir -d; }
 _makechrootpkg_args_I_opts() { _filedir '*.pkg.tar.*'; }
 _makechrootpkg_args_l_opts() { _filedir -d; }
+_makechrootpkg_args_t_opts() { _filedir -d; }
 _makechrootpkg_args_U_opts() { :; }
 _makechrootpkg_args_x_opts() { _devtools_completions_inspect; }
 _makechrootpkg() { __devtools_complete _makechrootpkg; }
@@ -61,12 +63,14 @@ _mkarchroot_args=(
 	-C
 	-M
 	-c
+	-f
 	-h
 )
 _mkarchroot_args_U_opts() { _filedir '*.pkg.tar.*'; }
 _mkarchroot_args_C_opts() { _filedir '*.conf'; }
 _mkarchroot_args_M_opts() { _filedir '*.conf'; }
 _mkarchroot_args_c_opts() { _filedir -d; }
+_mkarchroot_args_f_opts() { _filedir -d; }
 _mkarchroot_opts() {
 	local args
 	args=$(__pkgctl_word_count_after_subcommand)

contrib/completion/zsh/_devtools.in

@@ -222,6 +222,7 @@ _makechrootpkg_args=(
 	'-c[Clean the chroot before building]'
 	'*-d[Bind directory into build chroot as read-write]:bind_dir_rw:_files -/'
 	'*-D[Bind directory into build chroot as read-only]:bind_dir_ro:_files -/'
+	'*-t[Mount a tmpfs at directory]:tmpfs_dir:_files -/'
 	'-u[Update the working copy of the chroot before building]'
 	'-r[The chroot dir to use]:chroot_dir:_files -/'
 	'*-I[Install a package into the working copy]:target:_files -g "*.pkg.tar.*(.)"'
@@ -237,6 +238,7 @@ _mkarchroot_args=(
 	'-C[Location of a pacman config file]:pacman_config:_files -g "*.conf(.)"'
 	'-M[Location of a makepkg config file]:makepkg_config:_files -g "*.conf(.)"'
 	'-c[Set pacman cache]:pacman_cache:_files -/'
+	'-f[Copy src file from the host to the chroot]:target:_files -/'
 	'-h[Display usage]'
 	'1:working_dir:_files -/'
 	'*:packages:_devtools_completions_all_packages'

doc/man/arch-nspawn.1.asciidoc

@@ -28,8 +28,9 @@ Options
 *-c* <dir>::
 	Set pacman cache, if no directory is specified the passed pacman.conf's cachedir is used with a fallback to '/etc/pacman.conf'
 
-*-f* <file>::
+*-f* <src>[:<dst>]::
-	Copy file from the host to the chroot
+	Copy file from the host to the chroot.
+	If 'dst' is not provided, it defaults to 'src' inside of the chroot.
 
 *-s*::
 	Do not run setarch

doc/man/makechrootpkg.1.asciidoc

@@ -45,6 +45,9 @@ Options
 *-D* <dir>::
 	Bind directory into build chroot as read-only
 
+*-t* <dir>[:opts]::
+	Mount a tmpfs at 'dir'. See the '--tmpfs' argument in systemd-nspawn(1) for more details.
+
 *-u*::
 	Update the working copy of the chroot before building
 	This is useful for rebuilds without dirtying the pristine
@@ -76,5 +79,9 @@ Options
 *-x* <when>::
 	Inspect chroot after build, possible modes are 'never' (default), 'always' or 'failure'
 
+See Also
+--------
+
+systemd-nspawn(1)
 
 include::include/footer.asciidoc[]

doc/man/mkarchroot.1.asciidoc

@@ -32,8 +32,9 @@ Options
 *-c* <dir>::
 	Set pacman cache.
 
-*-f* <file>::
+*-f* <src>[:<dst>]::
 	Copy file from the host to the chroot.
+	If 'dst' is not provided, it defaults to 'src' inside of the chroot.
 
 *-s*::
 	Do not run setarch.

doc/man/pkgctl-build.1.asciidoc

@@ -12,7 +12,10 @@ pkgctl build [OPTIONS] [PATH...]
 Description
 -----------
 
-TODO
+Build packages in clean chroot environment, offering various options
+and functionalities to customize the package building process.
+
+By default, chroot environments are located in '/var/lib/archbuild/'.
 
 Build Options
 -------------

doc/man/pkgctl-db.1.asciidoc

@@ -0,0 +1,43 @@
+pkgctl-db(1)
+============
+
+NAME
+----
+pkgctl-db - Pacman database modification utility for package updates, moves, and more.
+
+SYNOPSIS
+--------
+pkgctl db [OPTIONS] [SUBCOMMAND]
+
+DESCRIPTION
+-----------
+
+Managing the Pacman database and facilitate the modification of packages and their metadata
+within the database
+
+OPTIONS
+-------
+
+*-h, --help*::
+    Display usage information and available options.
+
+Subcommands
+-----------
+
+pkgctl db update::
+    Update the binary repository as final release step
+
+pkgctl db move::
+    Move packages between binary repositories
+
+pkgctl db remove::
+    Remove packages from binary repositories
+
+SEE ALSO
+--------
+
+pkgctl-db-update(1)
+pkgctl-db-move(1)
+pkgctl-db-remove(1)
+
+include::include/footer.asciidoc[]

doc/man/pkgctl.1.asciidoc

@@ -12,7 +12,12 @@ pkgctl [SUBCOMMAND] [OPTIONS]
 Description
 -----------
 
-TODO
+Command-line utility serving as a unified interface for multiple development tools. 
+This tool aims to simplify and optimize interactions with devtools by offering 
+various subcommands for executing tasks related to package management, repository management, 
+version control, among others.
+
+Utilizing pkgctl enables users to efficiently administer their development workflows.
 
 Options
 -------

src/arch-nspawn.in

@@ -22,12 +22,13 @@ usage() {
 	echo "A wrapper around systemd-nspawn. Provides support for pacman."
 	echo
 	echo ' options:'
-	echo '    -C <file>     Location of a pacman config file'
+	echo '    -C <file>           Location of a pacman config file'
-	echo '    -M <file>     Location of a makepkg config file'
+	echo '    -M <file>           Location of a makepkg config file'
-	echo '    -c <dir>      Set pacman cache'
+	echo '    -c <dir>            Set pacman cache'
-	echo '    -f <file>     Copy file from the host to the chroot'
+	echo '    -f <src>[:<dst>]    Copy src file from the host to the chroot.'
-	echo '    -s            Do not run setarch'
+	echo '                        If dst file is not provided, it defaults to src'
-	echo '    -h            This message'
+	echo '    -s                  Do not run setarch'
+	echo '    -h                  This message'
 	exit 1
 }
 
@@ -114,8 +115,10 @@ copy_hostconf () {
 
 	local file
 	for file in "${files[@]}"; do
-		mkdir -p "$(dirname "$working_dir$file")"
+		src="${file%%:*}"
-		cp -T "$file" "$working_dir$file"
+		dst="${file#*:}"
+		mkdir -p "$(dirname "$working_dir$dst")"
+		cp -T "$src" "$working_dir$dst"
 	done
 
 	sed -r "s|^#?\\s*CacheDir.+|CacheDir = ${cache_dirs[*]}|g" -i "$working_dir/etc/pacman.conf"

src/checkpkg.in

@@ -140,7 +140,7 @@ for _pkgname in "${pkgname[@]}"; do
 	bsdtar tf "$TEMPDIR/$oldpkg" | sort > "$TEMPDIR/filelist-$_pkgname-old"
 	bsdtar tf "$pkgfile" | sort > "$TEMPDIR/filelist-$_pkgname"
 
-	sdiff -s "$TEMPDIR/filelist-$_pkgname-old" "$TEMPDIR/filelist-$_pkgname"
+	diff --side-by-side --suppress-common-lines --width="$COLUMNS" --color=auto "$TEMPDIR/filelist-$_pkgname-old" "$TEMPDIR/filelist-$_pkgname"
 
 	find-libprovides "$TEMPDIR/$oldpkg" 2>/dev/null | sort > "$TEMPDIR/libraries-$_pkgname-old"
 	find-libprovides "$pkgfile" 2>/dev/null | sort > "$TEMPDIR/libraries-$_pkgname"

src/lib/aur/drop-from-repo.sh

@@ -165,7 +165,7 @@ pkgctl_aur_drop_from_repo() {
 			warning 'Did not find %s in any repository, please delete manually' "${pkgbase}"
 		else
 			msg2 "  repo: ${pkgrepo}"
-			pkgctl_db_remove "${pkgrepo}" "${pkgbase}"
+			pkgctl_db_remove --noconfirm "${pkgrepo}" "${pkgbase}"
 		fi
 
 		popd >/dev/null

src/lib/auth/login.sh

@@ -63,7 +63,7 @@ pkgctl_auth_login() {
 		esac
 	done
 
-	personal_access_token_url="https://${GITLAB_HOST}/-/profile/personal_access_tokens?name=pkgctl+token&scopes=api,write_repository"
+	personal_access_token_url="https://${GITLAB_HOST}/-/user_settings/personal_access_tokens?name=pkgctl+token&scopes=api,write_repository"
 
     cat <<- _EOF_
 	Logging into ${BOLD}${GITLAB_HOST}${ALL_OFF}

src/lib/build/build.sh

@@ -55,6 +55,7 @@ pkgctl_build_usage() {
 		    -o, --offload        Build on a remote server and transfer artifacts afterwards
 		    -c, --clean          Recreate the chroot before building
 		    --inspect WHEN       Spawn an interactive shell to inspect the chroot (never, always, failure)
+		    --offline MODE       Run a part of the build process offline (build, check)
 		    -w, --worker SLOT    Name of the worker slot, useful for concurrent builds (disables automatic names)
 		    --nocheck            Do not run the check() function in the PKGBUILD
 
@@ -79,8 +80,8 @@ pkgctl_build_usage() {
 
 		EXAMPLES
 		    $ ${COMMAND}
-		    $ ${COMMAND} --rebuild --staging --message 'libyay 0.42 rebuild' libfoo libbar
+		    $ ${COMMAND} --rebuild --staging --release --message 'libyay 0.42 rebuild' libfoo libbar
-		    $ ${COMMAND} --pkgver 1.42 --release --db-update
+		    $ ${COMMAND} --pkgver=1.42 --release --db-update
 _EOF_
 }
 
@@ -198,6 +199,10 @@ pkgctl_build() {
 				EDIT=1
 				shift
 				;;
+			--offline)
+				MAKECHROOT_OPTIONS+=("-o" "$2")
+				shift 2
+				;;
 			-o|--offload)
 				OFFLOAD=1
 				shift

src/lib/common.sh

@@ -15,6 +15,9 @@ $DEVTOOLS_INCLUDE_COMMON_SH
 # Avoid any encoding problems
 export LANG=C.UTF-8
 
+# Avoid systemd trying to color the terminal on systemd-nspawn
+export SYSTEMD_TINT_BACKGROUND=no
+
 # Set buildtool properties
 export BUILDTOOL=devtools
 export BUILDTOOLVER=@buildtoolver@
@@ -117,6 +120,8 @@ print_workdir_error() {
 }
 
 _setup_workdir=false
+# Ensure that there is no outside value for WORKDIR leaking in
+unset WORKDIR
 setup_workdir() {
 	[[ -z ${WORKDIR:-} ]] && WORKDIR=$(mktemp -d --tmpdir "${0##*/}.XXXXXXXXXX")
 	_setup_workdir=true

src/lib/repo/configure.sh

@@ -271,6 +271,7 @@ pkgctl_repo_configure() {
 		if [[ -n $GPGKEY ]]; then
 			git config commit.gpgsign true
 			git config user.signingKey "${GPGKEY}"
+			git config gpg.format openpgp
 		fi
 
 		# set default git exclude

src/lib/version/check.sh

@@ -227,7 +227,7 @@ get_upstream_version() {
 	fi
 
 	if ! output=$(GIT_TERMINAL_PROMPT=0 nvchecker --file "${config}" --logger json "${opts[@]}" 2>&1 | \
-			jq --raw-output 'select(.level != "debug")'); then
+			jq --raw-output 'select((.level != "debug") and (.event != "ignoring invalid version"))'); then
 		printf "failed to run nvchecker: %s" "${output}"
 		return 1
 	fi
@@ -267,13 +267,13 @@ nvchecker_check_config() {
 	done
 
 	# check if the config contains a pkgbase section
-	if [[ -n ${pkgbase} ]] && ! grep --max-count=1 --extended-regexp --quiet "^\\[\"?${pkgbase}\"?\\]" < "${config}"; then
+	if [[ -n ${pkgbase} ]] && ! grep --max-count=1 --extended-regexp --quiet "^\\[\"?${pkgbase//+/\\+}\"?\\]" < "${config}"; then
 		printf "missing pkgbase section in %s: %s" "${config}" "${pkgbase}"
 		return 1
 	fi
 
 	# check if the config contains any section other than pkgbase
-	if [[ -n ${pkgbase} ]] && property=$(grep --max-count=1 --perl-regexp "^\\[(?!\"?${pkgbase}\"?\\]).+\\]" < "${config}"); then
+	if [[ -n ${pkgbase} ]] && property=$(grep --max-count=1 --perl-regexp "^\\[(?!\"?${pkgbase//+/\\+}\"?\\]).+\\]" < "${config}"); then
 		printf "non-pkgbase section not supported in %s: %s" "${config}" "${property}"
 		return 1
 	fi
@@ -284,7 +284,7 @@ nvchecker_check_error() {
 	local errors
 
 	if ! errors=$(jq --raw-output --exit-status \
-			'select(.level == "error") | "\(.event)" + if .error then ": \(.error)" else "" end' \
+			'select((.level == "error") and (.error != null)) | "\(.event)" + if .error then ": \(.error)" else "" end' \
 			<<< "${result}"); then
 		return 0
 	fi

src/lib/version/setup.sh

@@ -252,7 +252,7 @@ nvchecker_setup() {
 
 	# escape the section if it contains toml subsection chars
 	section="${pkgbase}"
-	if [[ ${section} == *.* ]]; then
+	if [[ ${section} == *.* ]] || [[ ${section} == *+* ]]; then
 		section="\"${section}\""
 	fi
 

src/makechrootpkg.in

@@ -38,6 +38,9 @@ inspect=never
 
 bindmounts_ro=()
 bindmounts_rw=()
+bindmounts_tmpfs=()
+
+offline_options=()
 
 copy=$USER
 [[ -n ${SUDO_USER:-} ]] && copy=$SUDO_USER
@@ -65,23 +68,25 @@ usage() {
 	echo "Default makepkg args: ${default_makepkg_args[*]}"
 	echo ''
 	echo 'Flags:'
-	echo '-h         This help'
+	echo '-h                This help'
-	echo '-c         Clean the chroot before building'
+	echo '-c                Clean the chroot before building'
-	echo '-d <dir>   Bind directory into build chroot as read-write'
+	echo '-d <dir>          Bind directory into build chroot as read-write'
-	echo '-D <dir>   Bind directory into build chroot as read-only'
+	echo '-D <dir>          Bind directory into build chroot as read-only'
-	echo '-u         Update the working copy of the chroot before building'
+	echo '-t <dir[:opts]>   Mount a tmpfs at directory'
-	echo '           This is useful for rebuilds without dirtying the pristine'
+	echo '-u                Update the working copy of the chroot before building'
-	echo '           chroot'
+	echo '                  This is useful for rebuilds without dirtying the pristine'
-	echo '-r <dir>   The chroot dir to use'
+	echo '                  chroot'
-	echo '-I <pkg>   Install a package into the working copy of the chroot'
+	echo '-r <dir>          The chroot dir to use'
-	echo '-l <copy>  The directory to use as the working copy of the chroot'
+	echo '-I <pkg>          Install a package into the working copy of the chroot'
-	echo '           Useful for maintaining multiple copies'
+	echo '-l <copy>         The directory to use as the working copy of the chroot'
-	echo "           Default: $copy"
+	echo '                  Useful for maintaining multiple copies'
-	echo '-n         Run namcap on the package'
+	echo "                  Default: $copy"
-	echo '-C         Run checkpkg on the package'
+	echo '-n                Run namcap on the package'
-	echo '-T         Build in a temporary directory'
+	echo '-o                Run given step offline'
-	echo '-U         Run makepkg as a specified user'
+	echo '-C                Run checkpkg on the package'
-	echo '-x <when>  Inspect chroot after build (never, always, failure)'
+	echo '-T                Build in a temporary directory'
+	echo '-U                Run makepkg as a specified user'
+	echo '-x <when>         Inspect chroot after build (never, always, failure)'
 	exit 1
 }
 
@@ -103,7 +108,7 @@ sync_chroot() {
 		"Locking clean chroot [%s]" "$chrootdir/root"
 
 	stat_busy "Synchronizing chroot copy [%s] -> [%s]" "$chrootdir/root" "$copy"
-	if is_btrfs "$chrootdir" && ! mountpoint -q "$copydir"; then
+	if is_btrfs "$chrootdir" && is_subvolume "$chrootdir/root" && ! mountpoint -q "$copydir"; then
 		subvolume_delete_recursive "$copydir" ||
 			die "Unable to delete subvolume %s" "$copydir"
 		btrfs subvolume snapshot "$chrootdir/root" "$copydir" >/dev/null ||
@@ -148,7 +153,7 @@ install_packages() {
 	pkgnames=("${install_pkgs[@]##*/}")
 
 	cp -- "${install_pkgs[@]}" "$copydir/root/"
-	arch-nspawn "$copydir" "${bindmounts_ro[@]}" "${bindmounts_rw[@]}" \
+	arch-nspawn "$copydir" "${bindmounts_ro[@]}" "${bindmounts_rw[@]}" "${bindmounts_tmpfs[@]}" \
 		pacman -U --noconfirm --ask=4 -- "${pkgnames[@]/#//root/}"
 	ret=$?
 	rm -- "${pkgnames[@]/#/$copydir/root/}"
@@ -188,6 +193,11 @@ builduser ALL = NOPASSWD: /usr/bin/pacman
 EOF
 	chmod 440 "$copydir/etc/sudoers.d/builduser-pacman"
 
+	cat > "$copydir/etc/gitconfig" <<EOF
+[safe]
+	directory = *
+EOF
+
 	# This is a little gross, but this way the script is recreated every time in the
 	# working copy
 	{
@@ -196,6 +206,7 @@ EOF
 		declare -p SOURCE_DATE_EPOCH 2>/dev/null || true
 		declare -p BUILDTOOL 2>/dev/null
 		declare -p BUILDTOOLVER 2>/dev/null
+		declare -p offline_options
 		printf '_chrootbuild "$@" || exit\n'
 
 		if (( run_namcap )); then
@@ -215,14 +226,52 @@ _chrootbuild() {
 	# shellcheck source=/dev/null
 	. /etc/profile
 
+	# for in_array
+	. /usr/share/makepkg/util.sh
+
 	# Beware, there are some stupid arbitrary rules on how you can
 	# use "$" in arguments to commands with "sudo -i".  ${foo} or
 	# ${1} is OK, but $foo or $1 isn't.
 	# https://bugzilla.sudo.ws/show_bug.cgi?id=765
+
+	# Run prepare
 	sudo --preserve-env=SOURCE_DATE_EPOCH \
 		--preserve-env=BUILDTOOL \
 		--preserve-env=BUILDTOOLVER \
-		-iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
+		-iu builduser bash -c 'cd /startdir; makepkg --nobuild "$@"' -bash "$@"
+
+	if in_array "build" "${offline_options[@]}"; then
+		msg "building offline"
+		# Build offline
+		unshare -n -- sudo --preserve-env=SOURCE_DATE_EPOCH \
+			--preserve-env=BUILDTOOL \
+			--preserve-env=BUILDTOOLVER \
+			-iu builduser \
+			bash -c 'cd /startdir; makepkg --noprepare --noextract --nocheck "$@"' -bash "$@"
+	else
+		sudo --preserve-env=SOURCE_DATE_EPOCH \
+			--preserve-env=BUILDTOOL \
+			--preserve-env=BUILDTOOLVER \
+			-iu builduser \
+			bash -c 'cd /startdir; makepkg --noprepare --noextract --nocheck "$@"' -bash "$@"
+	fi
+
+	if in_array "check" "${offline_options[@]}"; then
+		msg "check offline"
+		# Run tests online
+		unshare -n -- sudo --preserve-env=SOURCE_DATE_EPOCH \
+			--preserve-env=BUILDTOOL \
+			--preserve-env=BUILDTOOLVER \
+			-iu builduser \
+			bash -c 'cd /startdir; makepkg --noprepare --noextract --nobuild "$@"' -bash "$@"
+	else
+		sudo --preserve-env=SOURCE_DATE_EPOCH \
+			--preserve-env=BUILDTOOL \
+			--preserve-env=BUILDTOOLVER \
+			-iu builduser \
+			bash -c 'cd /startdir; makepkg --noprepare --noextract --nobuild "$@"' -bash "$@"
+	fi
+
 	ret=$?
 	case $ret in
 		0|14)
@@ -286,16 +335,18 @@ move_products() {
 }
 # }}}
 
-while getopts 'hcur:I:l:nCTD:d:U:x:' arg; do
+while getopts 'hcur:I:l:nCTD:o:d:U:x:t:' arg; do
 	case "$arg" in
 		c) clean_first=1 ;;
 		D) bindmounts_ro+=("--bind-ro=$OPTARG") ;;
 		d) bindmounts_rw+=("--bind=$OPTARG") ;;
+		t) bindmounts_tmpfs+=("--tmpfs=$OPTARG") ;;
 		u) update_first=1 ;;
 		r) passeddir="$OPTARG" ;;
 		I) install_pkgs+=("$OPTARG") ;;
 		l) copy="$OPTARG" ;;
 		n) run_namcap=1; makepkg_args+=(--install) ;;
+		o) offline_options+=("$OPTARG") ;;
 		C) run_checkpkg=1 ;;
 		T) temp_chroot=1; copy+="-$$" ;;
 		U) makepkg_user="$OPTARG" ;;
@@ -360,7 +411,7 @@ if [[ ! -d $copydir ]] || (( clean_first )); then
 fi
 
 (( update_first )) && arch-nspawn "$copydir" \
-		"${bindmounts_ro[@]}" "${bindmounts_rw[@]}" \
+		"${bindmounts_ro[@]}" "${bindmounts_rw[@]}" "${bindmounts_tmpfs[@]}" \
 		pacman -Syuu --noconfirm
 
 if [[ -n ${install_pkgs[*]:-} ]]; then
@@ -385,6 +436,7 @@ nspawn_build_args=(
 	--tmpfs="/tmp:${tmp_opts}"
 	"${bindmounts_ro[@]}"
 	"${bindmounts_rw[@]}"
+	"${bindmounts_tmpfs[@]}"
 )
 
 if arch-nspawn "$copydir" \

src/mkarchroot.in

@@ -22,13 +22,14 @@ nspawn_args=()
 usage() {
 	echo "Usage: ${0##*/} [options] working-dir package-list..."
 	echo ' options:'
-	echo '    -U            Use pacman -U to install packages'
+	echo '    -U                  Use pacman -U to install packages'
-	echo '    -C <file>     Location of a pacman config file'
+	echo '    -C <file>           Location of a pacman config file'
-	echo '    -M <file>     Location of a makepkg config file'
+	echo '    -M <file>           Location of a makepkg config file'
-	echo '    -c <dir>      Set pacman cache'
+	echo '    -c <dir>            Set pacman cache'
-	echo '    -f <file>     Copy file from the host to the chroot'
+	echo '    -f <src>[:<dst>]    Copy src file from the host to the chroot.'
-	echo '    -s            Do not run setarch'
+	echo '                        If dst file is not provided, it defaults to src'
-	echo '    -h            This message'
+	echo '    -s                  Do not run setarch'
+	echo '    -h                  This message'
 	exit 1
 }
 
@@ -84,8 +85,10 @@ if is_btrfs "$working_dir"; then
 fi
 
 for file in "${files[@]}"; do
-	mkdir -p "$(dirname "$working_dir$file")"
+	src="${file%%:*}"
-	cp "$file" "$working_dir$file"
+	dst="${file#*:}"
+	mkdir -p "$(dirname "$working_dir$dst")"
+	cp "$src" "$working_dir$dst"
 done
 
 unshare --mount pacstrap -${umode}Mc ${pac_conf:+-C "$pac_conf"} "$working_dir" \

test/fixture/version/setup/github-tarball-as-platform/nvchecker.assert.toml

@@ -2,3 +2,4 @@
 source = "github"
 github = "anthraxx/git-smash"
 use_max_tag = true
+prefix = "v"

test/fixture/version/setup/github-tarball/nvchecker.assert.toml

@@ -1,3 +1,4 @@
 [git-smash]
 source = "git"
 git = "https://github.com/anthraxx/git-smash.git"
+prefix = "v"

test/fixture/version/setup/pkgbase-with-dot/nvchecker.assert.toml

@@ -1,3 +1,4 @@
 ["git.smash"]
 source = "git"
 git = "https://github.com/anthraxx/git-smash.git"
+prefix = "v"