Makefile: update 0.14

remove initcpio

Makefile

@@ -1,4 +1,4 @@
-VERSION=0.13
+VERSION=0.14
 
 CHROOT_VERSION=0.9
 
@@ -8,7 +8,6 @@ SYSCONFDIR = /etc
 BINDIR = $(PREFIX)/bin
 LIBDIR = $(PREFIX)/lib
 DATADIR = $(PREFIX)/share
-CPIODIR = $(SYSCONFDIR)/initcpio
 
 CONF = \
 	data/artools.conf
@@ -109,8 +108,8 @@ ISO_LIBS = \
 
 ISO_UTIL = lib/util-iso.sh
 
-ISO_DATA = \
-	data/iso/mkinitcpio.conf
+DRACUT = \
+	data/dracut.conf
 
 DIRMODE = -dm0755
 FILEMODE = -m0644
@@ -185,10 +184,8 @@ install_pkg:
 
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/pkglists
 	install $(FILEMODE) $(PKG_LISTS) $(DESTDIR)$(DATADIR)/$(TOOLS)/pkglists
-install_cpio:
-	+make CPIODIR=$(CPIODIR) DESTDIR=$(DESTDIR) -C initcpio install
 
-install_iso: install_cpio
+install_iso:
 	install $(DIRMODE) $(DESTDIR)$(BINDIR)
 	install $(MODE) $(ISO_BIN) $(DESTDIR)$(BINDIR)
 
@@ -198,8 +195,8 @@ install_iso: install_cpio
 	install $(FILEMODE) $(ISO_UTIL) $(DESTDIR)$(LIBDIR)/$(TOOLS)
 	install $(FILEMODE) $(ISO_LIBS) $(DESTDIR)$(LIBDIR)/$(TOOLS)/iso
 
-	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
-	install $(FILEMODE) $(ISO_DATA) $(DESTDIR)$(DATADIR)/$(TOOLS)
+	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/dracut.cond.d
+	install $(FILEMODE) $(DRACUT) $(DESTDIR)$(SYSCONFDIR)/dracut.cond.d/90-artix-live.conf
 
 install: install_base install_pkg install_iso
 

README.md

@@ -34,7 +34,7 @@ artools
   * dosfstools
   * libisoburn
   * squashfs-tools
-  * mkinitcpio
+  * dracut
   * grub
 
 #### Configuration

data/artools.conf

@@ -57,9 +57,6 @@
 # possible values: openrc, runit (s6 not yet supported)
 # INITSYS="openrc"
 
-# gpg key; leave empty or commented to skip sfs signing
-# GPG_KEY=""
-
 # set upload bandwidth limit in kB/s
 # UPLIMIT=1000
 

data/iso/mkinitcpio.conf

@@ -1,5 +0,0 @@
-MODULES=(loop dm-snapshot)
-
-HOOKS=(base udev artix_shutdown artix artix_loop_mnt artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs artix_kms modconf block filesystems keyboard keymap)
-
-COMPRESSION="xz"

initcpio/Makefile

@@ -1,23 +0,0 @@
-DIRMODE = -dm0755
-MODE =  -m0755
-
-CPIOHOOKS = \
-	$(wildcard hooks/*)
-
-CPIOINST = \
-	$(wildcard install/*)
-
-SCRIPT = \
-	$(wildcard script/*)
-
-install_initcpio:
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/hooks
-	install $(MODE) $(CPIOHOOKS) $(DESTDIR)$(CPIODIR)/hooks
-
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(CPIOINST) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(SCRIPT) $(DESTDIR)$(CPIODIR)
-
-install: install_initcpio
-
-.PHONY: install

initcpio/hooks/artix

@@ -1,250 +0,0 @@
-# args: source, newroot, mountpoint
-_mnt_dmsnapshot() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}";
-    local img_name="${img_fullname%%.*}"
-    local dm_snap_name="${dm_snap_prefix}_${img_name}"
-    local ro_dev ro_dev_size rw_dev
-
-    ro_dev=$(losetup --find --show --read-only "${img}")
-    echo ${ro_dev} >> /run/artix/used_block_devices
-    ro_dev_size=$(blockdev --getsz ${ro_dev})
-
-    if [[ "${cow_persistent}" == "P" ]]; then
-        if [[ -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '/run/artix/cowspace/${cow_directory}/${img_name}.cow', using as persistent."
-        else
-            msg ":: Creating '/run/artix/cowspace/${cow_directory}/${img_name}.cow' as persistent."
-            truncate -s "${cow_spacesize}" "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
-        fi
-    else
-        if [[ -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '/run/artix/cowspace/${cow_directory}/${img_name}.cow' but non-persistent requested, removing."
-            rm -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
-        fi
-        msg ":: Creating '/run/artix/cowspace/${cow_directory}/${img_name}.cow' as non-persistent."
-        truncate -s "${cow_spacesize}" "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
-    fi
-
-    rw_dev=$(losetup --find --show "/run/artix/cowspace/${cow_directory}/${img_name}.cow")
-    echo ${rw_dev} >> /run/artix/used_block_devices
-
-    dmsetup create ${dm_snap_name} --table "0 ${ro_dev_size} snapshot ${ro_dev} ${rw_dev} ${cow_persistent} ${cow_chunksize}"
-
-    if [[ "${cow_persistent}" != "P" ]]; then
-        rm -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
-    fi
-
-    _mnt_dev "/dev/mapper/${dm_snap_name}" "${mnt}" "-w" "defaults"
-    echo $(readlink -f /dev/mapper/${dm_snap_name}) >> /run/artix/used_block_devices
-}
-
-# args: source, newroot, mountpoint
-_mnt_overlayfs() {
-    local src="${1}"
-    local newroot="${2}"
-    local mnt="${3}"
-    local work_dir="/run/artix/overlay_root/work"
-    local upper_dir="/run/artix/overlay_root/upper"
-
-    mkdir -p "${upper_dir}" "${work_dir}"
-
-    mount -t overlay overlay -o lowerdir="${src}",upperdir="${upper_dir}",workdir="${work_dir}" "${newroot}${mnt}"
-}
-
-# args: /path/to/image_file, mountpoint
-_mnt_sfs() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}"
-    local sfs_dev
-    local oper=$( [[ -n "${ip}" && -n "${miso_http_srv}" ]] && echo "mv" || echo "cp" )
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg -n ":: Copying squashfs image to RAM..."
-        if ! "${oper}" "${img}" "/run/artix/copytoram/${img_fullname}" ; then
-            echo "ERROR: while copy '${img}' to '/run/artix/copytoram/${img_fullname}'"
-            launch_interactive_shell
-        fi
-        img="/run/artix/copytoram/${img_fullname}"
-        msg "done."
-    fi
-    sfs_dev=$(losetup --find --show --read-only "${img}")
-    echo ${sfs_dev} >> /run/artix/used_block_devices
-    _mnt_dev "${sfs_dev}" "${mnt}" "-r" "defaults"
-}
-
-# args: device, mountpoint, flags, opts
-_mnt_dev() {
-    local dev="${1}"
-    local mnt="${2}"
-    local flg="${3}"
-    local opts="${4}"
-
-    mkdir -p "${mnt}"
-
-    msg ":: Mounting '${dev}' to '${mnt}'"
-
-    while ! poll_device "${dev}" 30; do
-        echo "ERROR: '${dev}' device did not show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    if mount -o "${opts}" "${flg}" "${dev}" "${mnt}"; then
-        msg ":: Device '${dev}' mounted successfully."
-    else
-        echo "ERROR; Failed to mount '${dev}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-_verify_checksum() {
-    local _status
-    cd "/run/artix/bootmnt/${artixbasedir}/${arch}"
-    sha512sum -c $1.sha512 > /tmp/checksum.log 2>&1
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-_verify_signature() {
-    local _status
-    cd "/run/artix/bootmnt/${artixbasedir}/${arch}"
-    gpg --homedir /gpg --status-fd 1 --verify $1.sfs.sig 2>/dev/null | grep -qE '^\[GNUPG:\] GOODSIG'
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-run_hook() {
-    [[ -z "${arch}" ]] && arch="$(uname -m)"
-    [[ -z "${copytoram_size}" ]] && copytoram_size="75%"
-    [[ -z "${artixbasedir}" ]] && artixbasedir="artix"
-
-    [[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="arch"
-    [[ -z "${artixdevice}" ]] && artixdevice="/dev/disk/by-label/${artixlabel}"
-    [[ -z "${cow_spacesize}" ]] && cow_spacesize="256M"
-    [[ -z "${overlay_root_size}" ]] && overlay_root_size="75%"
-
-    if [[ -n "${cow_label}" ]]; then
-        cow_device="/dev/disk/by-label/${cow_label}"
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    elif [[ -n "${cow_device}" ]]; then
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    else
-        cow_persistent="N"
-    fi
-
-    [[ -z "${cow_flags}" ]] && cow_flags="defaults"
-    [[ -z "${cow_directory}" ]] && cow_directory="persistent_${artixlabel}/${arch}"
-    [[ -z "${cow_chunksize}" ]] && cow_chunksize="8"
-
-    # set mount handler for artix
-    mount_handler="artix_mount_handler"
-}
-
-# This function is called normally from init script, but it can be called
-# as chain from other mount handlers.
-# args: /path/to/newroot
-artix_mount_handler() {
-    local newroot="${1}"
-
-    if ! mountpoint -q "/run/artix/bootmnt"; then
-        _mnt_dev "${artixdevice}" "/run/artix/bootmnt" "-r" "defaults"
-        if [[ "${copytoram}" != "y" ]]; then
-            echo $(readlink -f ${artixdevice}) >> /run/artix/used_block_devices
-        fi
-    fi
-
-    if [[ "${checksum}" == "y" ]]; then
-        for fs in rootfs desktopfs livefs;do
-            if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sfs" ]]; then
-                if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sha512" ]]; then
-                    msg -n ":: Self-test requested, please wait..."
-                    if _verify_checksum "${fs}"; then
-                        msg "done. Checksum is OK, continue booting."
-                    else
-                        echo "ERROR: one or more files are corrupted"
-                        echo "see /tmp/checksum.log for details"
-                        launch_interactive_shell
-                    fi
-                else
-                    echo "ERROR: checksum=y option specified but ${artixbasedir}/${arch}/${fs}.sha512 not found"
-                    launch_interactive_shell
-                fi
-            fi
-        done
-    fi
-
-    if [[ "${verify}" == "y" ]]; then
-        for fs in rootfs desktopfs livefs;do
-            if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sfs" ]]; then
-                if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sfs.sig" ]]; then
-                    msg -n ":: Signature verification requested, please wait..."
-                    if _verify_signature "${fs}"; then
-                        msg "done. Signature is OK, continue booting."
-                    else
-                        echo "ERROR: one or more files are corrupted"
-                        launch_interactive_shell
-                    fi
-                else
-                    echo "ERROR: verify=y option specified but ${artixbasedir}/${arch}/${fs}.sfs.sig not found"
-                    launch_interactive_shell
-                fi
-            fi
-        done
-    fi
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Mounting /run/artix/copytoram (tmpfs) filesystem, size=${copytoram_size}"
-        mkdir -p /run/artix/copytoram
-        mount -t tmpfs -o "size=${copytoram_size}",mode=0755 copytoram /run/artix/copytoram
-    fi
-
-    if [[ -n "${cow_device}" ]]; then
-        _mnt_dev "${cow_device}" "/run/artix/cowspace" "-r" "${cow_flags}"
-        echo $(readlink -f ${cow_device}) >> /run/artix/used_block_devices
-        mount -o remount,rw "/run/artix/cowspace"
-    else
-        msg ":: Mounting /run/artix/cowspace (tmpfs) filesystem, size=${cow_spacesize}..."
-        mkdir -p /run/artix/cowspace
-        mount -t tmpfs -o "size=${cow_spacesize}",mode=0755 cowspace /run/artix/cowspace
-    fi
-    mkdir -p -m 0700 "/run/artix/cowspace/${cow_directory}"
-
-    msg -n ":: Mounting overlay root (tmpfs) filesystem, size=${overlay_root_size}..."
-    mkdir -p /run/artix/overlay_root
-    mount -t tmpfs -o "size=${overlay_root_size}",mode=0755 overlay_root /run/artix/overlay_root
-
-    local src="/run/artix/bootmnt/${artixbasedir}/${arch}"
-    local dest_sfs="/run/artix/sfs" dest_img="/run/artix/img"
-    local lower_dir
-
-    for sfs in livefs desktopfs rootfs;do
-        if [[ -f "${src}/${sfs}.sfs" ]]; then
-            _mnt_sfs "${src}/${sfs}.sfs" "${dest_sfs}/${sfs}"
-            if [[ -f "${dest_sfs}/${sfs}/${sfs}.img" ]]; then
-                mkdir -p ${dest_img}
-                lower_dir=${lower_dir:-}${lower_dir:+:}"${dest_img}/${sfs}"
-                _mnt_dmsnapshot "${dest_sfs}/${sfs}/${sfs}.img" "${dest_img}/${sfs}"
-            else
-                lower_dir=${lower_dir:-}${lower_dir:+:}"${dest_sfs}/${sfs}"
-            fi
-        fi
-    done
-
-    _mnt_overlayfs "${lower_dir}" "${newroot}" "/"
-
-    if [[ "${copytoram}" == "y" ]]; then
-        umount -d /run/artix/bootmnt
-        mkdir -p /run/artix/bootmnt/${artixbasedir}/${arch}
-        mount -o bind /run/artix/copytoram /run/artix/bootmnt/${artixbasedir}/${arch}
-    fi
-}
-
-# vim:ft=sh:ts=4:sw=4:et:

initcpio/hooks/artix_loop_mnt

@@ -1,35 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    [[ -n "${img_label}" ]] && img_dev="/dev/disk/by-label/${img_label}"
-    [[ -z "${img_flags}" ]] && img_flags="defaults"
-    if [[ -n "${img_dev}" && -n "${img_loop}" ]]; then
-        mount_handler="artix_loop_mount_handler"
-    fi
-}
-
-artix_loop_mount_handler () {
-    newroot="${1}"
-
-    local _dev_loop
-
-    msg ":: Setup a loop device from ${img_loop} located at device ${img_dev}"
-    _mnt_dev "${img_dev}" "/run/artix/img_dev" "-r" "${img_flags}"
-    if [[ "${copytoram}" != "y" ]]; then
-        echo $(readlink -f ${img_dev}) >> /run/artix/used_block_devices
-    fi
-
-    if _dev_loop=$(losetup --find --show --read-only "/run/artix/img_dev/${img_loop}"); then
-        artixdevice="${_dev_loop}"
-    else
-        echo "ERROR: Setting loopback device for file '/run/artix/img_dev/${img_loop}'"
-        launch_interactive_shell
-    fi
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        losetup -d ${_dev_loop} 2>/dev/null
-        umount /run/artix/img_dev
-    fi
-}

initcpio/hooks/artix_pxe_common

@@ -1,72 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    # Do *not* declare 'bootif_dev' local! We need it in run_latehook().
-    local i net_mac bootif_mac
-    # These variables will be parsed from /tmp/net-*.conf generated by ipconfig
-    local DEVICE
-    local IPV4ADDR IPV4BROADCAST IPV4NETMASK IPV4GATEWAY IPV4DNS0 IPV4DNS1
-    local HOSTNAME DNSDOMAIN NISDOMAIN ROOTSERVER ROOTPATH
-    local filename
-    # /tmp/net-*.conf
-
-    if [[ -n "${ip}" ]]; then
-        if [[ -n "${BOOTIF}" ]]; then
-            bootif_mac=${BOOTIF#01-}
-            bootif_mac=${bootif_mac//-/:}
-            for i in /sys/class/net/*/address; do
-                read net_mac < ${i}
-                if [[ "${bootif_mac}" == "${net_mac}" ]]; then
-                    bootif_dev=${i#/sys/class/net/}
-                    bootif_dev=${bootif_dev%/address}
-                    break
-                fi
-            done
-            if [[ "${ip}" == "dhcp" ]]; then
-               ip=":::::${bootif_dev}:dhcp"
-            else
-               ip="${ip}::${bootif_dev}"
-           fi
-        fi
-
-        # setup network and save some values
-        if ! ipconfig -t 20 "ip=${ip}"; then
-                echo "ERROR; Failed to configure network"
-                echo "   Falling back to interactive prompt"
-                echo "   You can try to fix the problem manually, log out when you are finished"
-                launch_interactive_shell
-        fi
-
-        . /tmp/net-*.conf
-
-        pxeserver=${ROOTSERVER}
-
-        # setup DNS resolver
-        if [[ "${IPV4DNS0}" != "0.0.0.0" ]]; then
-            echo "# added by artix_pxe_common hook" > /etc/resolv.conf
-            echo "nameserver ${IPV4DNS0}" >> /etc/resolv.conf
-        fi
-        if [[ "${IPV4DNS1}" != "0.0.0.0" ]]; then
-            echo "nameserver ${IPV4DNS1}" >> /etc/resolv.conf
-        fi
-        if [[ -n "${DNSDOMAIN}" ]]; then
-            echo "search ${DNSDOMAIN}" >> /etc/resolv.conf
-            echo "domain ${DNSDOMAIN}" >> /etc/resolv.conf
-        fi
-    fi
-}
-
-run_latehook () {
-    if [[ -n "${ip}" ]]; then
-        [[ -z "${copy_resolvconf}" ]] && copy_resolvconf="y"
-
-        if [[ "${copytoram}" == "y" ]]; then
-            if [[ -n "${bootif_dev}" ]]; then
-                ip addr flush dev "${bootif_dev}"
-                ip link set "${bootif_dev}" down
-            fi
-        elif [[ "${copy_resolvconf}" != "n" && -f /etc/resolv.conf ]]; then
-            cp /etc/resolv.conf /new_root/etc/resolv.conf
-        fi
-    fi
-}

initcpio/hooks/artix_pxe_http

@@ -1,59 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_http_srv}" ]]; then
-
-        # booting with http is always copy-to-ram, so set here to make sure
-        # addresses are flushed and interface is set down
-        copytoram="y"
-
-        artix_http_srv=$(eval echo ${artix_http_srv})
-        [[ -z "${artix_http_spc}" ]] && artix_http_spc="75%"
-
-        mount_handler="artix_pxe_http_mount_handler"
-    fi
-}
-
-# Fetch a file with CURL
-#
-# $1 URL
-# $2 Destination directory inside httpspace/${artixbasedir}
-_curl_get() {
-    local _url="${1}"
-    local _dst="${2}"
-
-    msg ":: Downloading '${_url}'"
-    if ! curl -L -f -o "/run/artix/httpspace/${artixbasedir}${_dst}/${_url##*/}" --create-dirs "${_url}"; then
-        echo "ERROR: Downloading '${_url}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-artix_pxe_http_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Mounting /run/artix/httpspace (tmpfs) filesystem, size='${artix_http_spc}'"
-    mkdir -p "/run/artix/httpspace"
-    mount -t tmpfs -o size="${artix_http_spc}",mode=0755 httpspace "/run/artix/httpspace"
-
-    local _src=${artix_http_srv}${artixbasedir}/${arch}
-
-    for sfs in livefs desktopfs rootfs;do
-        if [[ ! -z "$( curl -s --head "${_src}/${sfs}.sfs" | grep "OK" )" ]]; then
-            _curl_get "${_src}/${sfs}.sfs" "/${arch}"
-
-            if [[ "${checksum}" == "y" ]]; then
-                _curl_get "${_src}/${sfs}.md5" "/${arch}"
-            fi
-            if [[ "${verify}" == "y" ]]; then
-                _curl_get "${_src}/${sfs}.sfs.sig" "/${arch}"
-            fi
-        fi
-    done
-    mkdir -p "/run/artix/bootmnt"
-    mount -o bind /run/artix/httpspace /run/artix/bootmnt
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_pxe_nbd

@@ -1,47 +0,0 @@
-# vim: set ft=sh:
-
-run_earlyhook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-        # Module autoloading like with loop devices does not work, doing manually...
-        modprobe nbd 2> /dev/null
-    fi
-}
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-
-        artix_nbd_srv=$(eval echo ${artix_nbd_srv})
-        [[ -z "${artix_nbd_name}" ]] && artix_nbd_name="artix"
-
-        mount_handler="artix_pxe_nbd_mount_handler"
-    fi
-}
-
-artix_pxe_nbd_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Waiting for boot device..."
-    while ! poll_device /dev/nbd0 30; do
-        echo "ERROR: boot device didn't show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    msg ":: Setup NBD from ${artix_nbd_srv} at /dev/nbd0"
-    if [[ "${copytoram}" != "n" ]]; then
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} /dev/nbd0
-        copytoram="y"
-    else
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} -persist /dev/nbd0
-    fi
-
-    artixdevice=/dev/nbd0
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Disconnect NBD from ${artix_nbd_srv} at /dev/nbd0"
-        nbd-client -d /dev/nbd0
-    fi
-}

initcpio/hooks/artix_pxe_nfs

@@ -1,30 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nfs_srv}" ]]; then
-
-        artix_nfs_srv=$(eval echo ${artix_nfs_srv})
-        [[ -n "${artix_nfs_opt}" ]] && artix_nfs_opt="-o ${artix_nfs_opt}"
-
-        mount_handler="artix_nfs_mount_handler"
-    fi
-}
-
-artix_nfs_mount_handler() {
-    newroot="${1}"
-    mkdir -p "/run/artix/bootmnt"
-    msg ":: Mounting '${artix_nfs_srv}'"
-    # Do not put "${artix_nfs_opt}" nfsmount fails!
-    if ! nfsmount ${artix_nfs_opt} "${artix_nfs_srv}" "/run/artix/bootmnt"; then
-        echo "ERROR: Mounting '${artix_nfs_srv}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-
-    if [[ "${copytoram}" != "n" ]]; then
-        copytoram="y"
-    fi
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_shutdown

@@ -1,6 +0,0 @@
-run_cleanuphook() {
-    rm -rf /usr/lib/modules
-    cp -ax / /run/initramfs
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "cdrom"
-    add_module "loop"
-    add_module "dm-snapshot"
-    add_module "overlay"
-
-    add_runscript
-
-    add_binary /usr/lib/udev/cdrom_id
-    add_binary blockdev
-    add_binary dmsetup
-    add_binary losetup
-    add_binary mountpoint
-    add_binary truncate
-    add_binary gpg
-    add_binary grep
-
-    add_file /usr/lib/udev/rules.d/60-cdrom_id.rules
-    add_file /usr/lib/udev/rules.d/10-dm.rules
-    add_file /usr/lib/udev/rules.d/95-dm-notify.rules
-    add_file /usr/lib/initcpio/udev/11-dm-initramfs.rules /usr/lib/udev/rules.d/11-dm-initramfs.rules
-    if [[ $ARTIX_GNUPG_FD ]]; then
-        mkdir -p "$BUILDROOT$dest"/gpg
-        gpg --homedir "$BUILDROOT$dest"/gpg --import <&$ARTIX_GNUPG_FD
-    fi
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_kms

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "radeon"
-    add_module "nouveau"
-    add_module "i915"
-    add_module "via-agp"
-    add_module "sis-agp"
-    add_module "intel-agp"
-}
-
-help() {
-    cat << HELPEOF
-Adds all common KMS drivers to the initramfs image.
-HELPEOF
-}

initcpio/install/artix_loop_mnt

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via loop device.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_common

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_checked_modules -f "(irda|phy|wimax|wireless|ppp_|plip|pppoe)" "/drivers/net/"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/ipconfig /bin/ipconfig
-
-    # Add hosts support files+dns
-    add_symlink /usr/lib/libnss_files.so.2 $(readlink /usr/lib/libnss_files.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_files.so.2)
-    add_symlink /usr/lib/libnss_dns.so.2 $(readlink /usr/lib/libnss_dns.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_dns.so.2)
-
-    add_dir /etc
-    echo "hosts: files dns" > $BUILDROOT/etc/nsswitch.conf
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_http

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-
-    add_binary curl
-
-    add_file $(readlink -f /etc/ssl/certs/ca-certificates.crt) /etc/ssl/certs/ca-certificates.crt
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and HTTP.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nbd

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nbd"
-
-    add_runscript
-
-    add_binary nbd-client
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NBD.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nfs

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nfs"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/nfsmount /bin/nfsmount
-}
-
-help() {
-    cat <<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NFS.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_shutdown

@@ -1,20 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_binary cp
-
-    add_runscript
-
-    add_file /etc/initcpio/artix_shutdown /shutdown
-}
-
-help() {
-    cat <<HELPEOF
-This hook will create a shutdown initramfs in /run/initramfs
-that we can pivot to on shutdown in order to unmount / and
-and others mount points, dm-snapshot devices and loopback devices.
-Mostly usefull for dm-snapshot persistent.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/script/artix_shutdown

@@ -1,38 +0,0 @@
-#!/bin/ash
-
-# /oldroot depends on things inside /oldroot/run/artix...
-mkdir /oldrun
-mount -n --move /oldroot/run /oldrun
-
-# Unmount all mounts now.
-#umount $(mount | awk '$3 ~/^\/oldroot/ {print $3}' | sort -r)
-umount $(mount | awk '$3 ~/^\/oldroot/ {if($3 != "/run/artix/bootmnt") print $3}' | sort -r)
-
-# Remove all dm-snapshot devices.
-dmsetup remove_all
-
-# Remove all loopback devices.
-for _lup in $(grep ^/dev/loop /oldrun/artix/used_block_devices | tac); do
-    if ! losetup -d ${_lup} 2> /dev/null; then
-        umount -d ${_lup}
-    fi
-done
-
-# Unmount the space used to store *.cow.
-umount /oldrun/artix/cowspace
-
-# Unmount boot device if needed (no copytoram=y used)
-if [[ ! -d /oldrun/artix/copytoram ]]; then
-    if [[ -d /oldrun/artix/img_dev ]]; then
-        umount /oldrun/artix/img_dev
-    else
-        umount /oldrun/artix/bootmnt
-    fi
-fi
-
-# reboot / poweroff / halt, depending on the argument passed by init
-# if something invalid is passed, we halt
-case "$1" in
-  reboot|poweroff|halt) "$1" -f ;;
-  *) halt -f;;
-esac

lib/base/util.sh

@@ -125,8 +125,6 @@ init_artools_iso(){
 
     INITSYS=${INITSYS:-'openrc'}
 
-    GPG_KEY=${GPG_KEY:-''}
-
     UPLIMIT=${UPLIMIT:-1000}
 
     FILE_HOST="download.${DOMAIN}"

lib/iso/chrootcfg.sh

@@ -153,7 +153,7 @@ configure_calamares(){
         msg2 "Configuring Calamares"
         write_users_conf > "$mods"/users.conf
         write_servicescfg_conf > "$mods"/services-"${INITSYS}".conf
-        [[ -z ${DESKTOP_LIST} ]] && write_unpackfs_conf > "$mods"/unpackfs.conf
+        write_unpackfs_conf > "$mods"/unpackfs.conf
         sed -e "s|openrc|${INITSYS}|" -i "$mods"/postcfg.conf
         sed -e "s|services-openrc|services-${INITSYS}|" -i "$1"/etc/calamares/settings.conf
     fi

lib/iso/grub.sh

@@ -12,38 +12,11 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-prepare_initcpio(){
-    msg2 "Copying initcpio ..."
-    local dest="$1"
-    cp /etc/initcpio/hooks/artix* $dest/etc/initcpio/hooks
-    cp /etc/initcpio/install/artix* $dest/etc/initcpio/install
-    cp /etc/initcpio/artix_shutdown $dest/etc/initcpio
-}
-
 prepare_initramfs(){
-    local mnt="$1"
-    cp ${DATADIR}/mkinitcpio.conf $mnt/etc/mkinitcpio-artix.conf
+    local src="$1" dest="$2"
+    local kver=$(cat $src/usr/lib/modules/extramodules-ARTIX/version)
 
-    if [[ "${PROFILE}" != 'base' ]];then
-        sed -e 's/artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs //' -i $mnt/etc/mkinitcpio-artix.conf
-    fi
-
-    if [[ -n ${GPG_KEY} ]]; then
-        user_run "gpg --export ${GPG_KEY} >${USERCONFDIR}/artools/gpgkey"
-        exec 17<>${USERCONFDIR}/artools/GPG_KEY
-    fi
-    local _kernel=$(cat $mnt/usr/lib/modules/*/version)
-    ARTIX_GNUPG_FD=${GPG_KEY:+17} chroot-run $mnt \
-        /usr/bin/mkinitcpio -k ${_kernel} \
-        -c /etc/mkinitcpio-artix.conf \
-        -g /boot/initramfs.img
-
-    if [[ -n ${GPG_KEY} ]]; then
-        exec 17<&-
-    fi
-    if [[ -f ${USERCONFDIR}/artools/GPG_KEY ]]; then
-        rm ${USERCONFDIR}/artools/GPG_KEY
-    fi
+    dracut -fqM $dest/initramfs-${ARCH}.img $kver
 }
 
 prepare_boot_extras(){
@@ -61,6 +34,17 @@ prepare_boot_extras(){
 configure_grub(){
     local conf="$1/boot/grub/kernels.cfg"
     sed -e "s|@iso_label@|${iso_label}|" -i $conf
+
+#     rd.vconsole.keymap=
+#     rd.live.overlay.size=
+#     root=live:<URL>
+#     rd.live.ram=1
+#     rd.live.overlay.readonly
+#     rd.live.overlay=none
+#     rd.writable.fsimg=1
+#      rd.live.dir=<path>
+#       rd.live.squashimg=<filename of SquashFS image>
+#       rd.live.overlay.overlayfs=1
 }
 
 prepare_grub(){

lib/iso/iso.sh

@@ -33,24 +33,6 @@ clean_iso_root(){
     rm -rf --one-file-system "$dest"
 }
 
-make_sig () {
-    local idir="$1" file="$2"
-    msg2 "Creating signature file..."
-    cd "$idir"
-    user_own "$idir"
-    user_run "gpg --detach-sign --default-key ${GPG_KEY} $file.sfs"
-    chown -R root "$idir"
-    cd ${OLDPWD}
-}
-
-make_checksum(){
-    local idir="$1" file="$2"
-    msg2 "Creating sha512sum ..."
-    cd $idir
-    sha512sum $file.sfs > $file.sha512
-    cd ${OLDPWD}
-}
-
 # $1: image path
 make_sfs() {
     local src="$1"
@@ -108,13 +90,8 @@ make_sfs() {
 
     mksquashfs "${mksfs_args[@]}"
 
-    make_checksum "${dest}" "${name}"
     ${persist} && rm "${src}.img"
 
-    if [[ -n ${GPG_KEY} ]];then
-        make_sig "${dest}" "${name}"
-    fi
-
     show_elapsed_time "${FUNCNAME}" "${timer_start}"
 }
 

lib/iso/mount.sh

@@ -39,21 +39,14 @@ track_fs() {
 
 mount_overlay(){
     FS_ACTIVE_MOUNTS=()
-    local lower= upper="$1" work="$2" pkglist="$3"
+    local lower= upper="$1" work="$2"
     local fs=${upper##*/}
-    local rootfs="$work/rootfs" desktopfs="$work/desktopfs" livefs="$work/livefs"
+    local rootfs="$work/rootfs" livefs="$work/livefs"
     mkdir -p "${mnt_dir}/work"
     mkdir -p "$upper"
     case $fs in
-        desktopfs) lower="$rootfs" ;;
-        livefs)
-            lower="$rootfs"
-            [[ -f $pkglist ]] && lower="$desktopfs":"$rootfs"
-        ;;
-        bootfs)
-            lower="$livefs":"$rootfs"
-            [[ -f $pkglist ]] && lower="$livefs":"$desktopfs":"$rootfs"
-        ;;
+        livefs) lower="$rootfs" ;;
+        bootfs) lower="$livefs":"$rootfs" ;;
     esac
     track_fs -t overlay overlay -olowerdir="$lower",upperdir="$upper",workdir="${mnt_dir}/work" "$upper"
 }

lib/iso/profile.sh

@@ -23,9 +23,6 @@ init_profile(){
     [[ -f "$profdir/$prof/Packages-Root" ]] && ROOT_LIST="$profdir/$prof/Packages-Root"
     [[ -d "$profdir/$prof/root-overlay" ]] && ROOT_OVERLAY="$profdir/$prof/root-overlay"
 
-    [[ -f "$profdir/$prof/Packages-Desktop" ]] && DESKTOP_LIST="$profdir/$prof/Packages-Desktop"
-    [[ -d "$profdir/$prof/desktop-overlay" ]] && DESKTOP_OVERLAY="$profdir/$prof/desktop-overlay"
-
     [[ -f "$profdir/$prof/Packages-Live" ]] && LIVE_LIST="$profdir/$prof/Packages-Live"
     [[ -d "$profdir/$prof/live-overlay" ]] && LIVE_OVERLAY="$profdir/$prof/live-overlay"
 }

lib/iso/util.sh

@@ -173,26 +173,6 @@ make_rootfs() {
     fi
 }
 
-make_desktopfs() {
-    if [[ ! -e ${work_dir}/desktopfs.lock ]]; then
-        msg "Prepare [Desktop installation] (desktopfs)"
-        local desktopfs="${work_dir}/desktopfs"
-
-        prepare_dir "${desktopfs}"
-
-        mount_overlay "${desktopfs}" "${work_dir}"
-
-        install_packages "${desktopfs}"
-
-        copy_overlay "${DESKTOP_OVERLAY}" "${desktopfs}"
-
-        umount_overlay
-        clean_up_image "${desktopfs}"
-
-        msg "Done [Desktop installation] (desktopfs)"
-    fi
-}
-
 make_livefs() {
     if [[ ! -e ${work_dir}/livefs.lock ]]; then
         msg "Prepare [Live installation] (livefs)"
@@ -200,7 +180,7 @@ make_livefs() {
 
         prepare_dir "${livefs}"
 
-        mount_overlay "${livefs}" "${work_dir}" "${DESKTOP_LIST}"
+        mount_overlay "${livefs}" "${work_dir}"
 
         install_packages "${livefs}"
 
@@ -227,12 +207,11 @@ make_bootfs() {
 
         local bootfs="${work_dir}/bootfs"
 
-        mount_overlay "${bootfs}" "${work_dir}" "${DESKTOP_LIST}"
+        mount_overlay "${bootfs}" "${work_dir}"
 
-        prepare_initcpio "${bootfs}"
-        prepare_initramfs "${bootfs}"
+        prepare_initramfs "${bootfs}" "${boot}"
 
-        cp ${bootfs}/boot/initramfs.img ${boot}/initramfs-${ARCH}.img
+#         cp ${bootfs}/boot/initramfs.img ${boot}/initramfs-${ARCH}.img
         prepare_boot_extras "${bootfs}" "${boot}"
 
         umount_overlay
@@ -267,10 +246,6 @@ prepare_images(){
     local timer=$(get_timer)
     load_pkgs "${ROOT_LIST}" "${INITSYS}"
     run_safe "make_rootfs"
-    if [[ -f "${DESKTOP_LIST}" ]] ; then
-        load_pkgs "${DESKTOP_LIST}" "${INITSYS}"
-        run_safe "make_desktopfs"
-    fi
     if [[ -f ${LIVE_LIST} ]]; then
         load_pkgs "${LIVE_LIST}" "${INITSYS}"
         run_safe "make_livefs"