Merge pull request #50 from artix-linux/devel

Devel

Makefile

@@ -1,4 +1,6 @@
-Version=0.6
+Version=0.7
+
+Chroot_version=0.7
 
 PREFIX = /usr/local
 SYSCONFDIR = /etc
@@ -22,44 +24,49 @@ LIBS_BASE = \
 	lib/util-fstab.sh
 
 SHARED_BASE = \
-	$(wildcard data/pacman-*.conf)
-
-LIST_IMPORT = \
-	$(wildcard data/import.list.d/*.list)
+	$(wildcard data/pacman*.conf)
 
 BIN_PKG = \
 	bin/checkpkg \
 	bin/lddd \
 	bin/finddeps \
-	bin/findupdates \
 	bin/find-libdeps \
 	bin/mkchrootpkg \
 	bin/buildpkg \
 	bin/buildtree \
-	bin/deploypkg
+	bin/deploypkg \
+	bin/commitpkg
 
 LIBS_PKG = \
 	$(wildcard lib/util-pkg*.sh)
 
 SHARED_PKG = \
-	$(wildcard data/makepkg-*.conf)
+	data/makepkg.conf
 
 PATCHES = \
 	$(wildcard data/patches/*.patch)
 
+COMMITPKG_SYMS = \
+	extrapkg \
+	corepkg \
+	testingpkg \
+	stagingpkg \
+	communitypkg \
+	community-testingpkg \
+	community-stagingpkg \
+	multilibpkg \
+	multilib-testingpkg \
+	multilib-stagingpkg
+
 BIN_ISO = \
 	bin/buildiso \
-	bin/deployiso \
-	bin/buildyaml
+	bin/deployiso
 
 LIBS_ISO = \
-	$(wildcard lib/util-iso*.sh) \
-	$(wildcard lib/util-yaml*.sh) \
-	lib/util-profile.sh
+	$(wildcard lib/util-iso*.sh)
 
 SHARED_ISO = \
-	data/mkinitcpio.conf \
-	data/linux.preset
+	data/mkinitcpio.conf
 
 CPIOHOOKS = \
 	$(wildcard initcpio/hooks/*)
@@ -92,7 +99,8 @@ all: $(BIN_BASE) $(BIN_PKG) $(BIN_ISO)
 edit = sed -e "s|@datadir[@]|$(DESTDIR)$(PREFIX)/share/artools|g" \
 	-e "s|@sysconfdir[@]|$(DESTDIR)$(SYSCONFDIR)/artools|g" \
 	-e "s|@libdir[@]|$(DESTDIR)$(PREFIX)/lib/artools|g" \
-	-e "s|@version@|${Version}|"
+	-e "s|@version@|${Version}|" \
+	-e "s|@chroot_version@|${Chroot_version}|"
 
 %: %.in Makefile
 	@echo "GEN $@"
@@ -118,16 +126,13 @@ install_base:
 	install -m0644 ${SHARED_BASE} $(DESTDIR)$(PREFIX)/share/artools
 
 install_pkg:
-	install -dm0755 $(DESTDIR)$(SYSCONFDIR)/artools/import.list.d
-	install -m0644 ${LIST_IMPORT} $(DESTDIR)$(SYSCONFDIR)/artools/import.list.d
-
 	install -dm0755 $(DESTDIR)$(PREFIX)/bin
 	install -m0755 ${BIN_PKG} $(DESTDIR)$(PREFIX)/bin
 
-	ln -sf buildpkg $(DESTDIR)$(PREFIX)/bin/buildpkg-testing
-
 	ln -sf find-libdeps $(DESTDIR)$(PREFIX)/bin/find-libprovides
 
+	for l in ${COMMITPKG_SYMS}; do ln -sf commitpkg $(DESTDIR)$(PREFIX)/bin/$$l; done
+
 	install -dm0755 $(DESTDIR)$(PREFIX)/lib/artools
 	install -m0644 ${LIBS_PKG} $(DESTDIR)$(PREFIX)/lib/artools
 
@@ -157,7 +162,7 @@ install_iso:
 	install -dm0755 $(DESTDIR)$(PREFIX)/bin
 	install -m0755 ${BIN_ISO} $(DESTDIR)$(PREFIX)/bin
 
-	ln -sf buildiso $(DESTDIR)$(PREFIX)/bin/buildiso-testing
+	ln -sf buildiso $(DESTDIR)$(PREFIX)/bin/buildiso-gremlins
 
 	install -dm0755 $(DESTDIR)$(PREFIX)/lib/artools
 	install -m0644 ${LIBS_ISO} $(DESTDIR)$(PREFIX)/lib/artools
@@ -180,10 +185,9 @@ uninstall_base:
 	for f in ${LIBS_BASE}; do rm -f $(DESTDIR)$(PREFIX)/lib/artools/$$f; done
 
 uninstall_pkg:
-	for f in ${LIST_IMPORT}; do rm -f $(DESTDIR)$(SYSCONFDIR)/artools/import.list.d/$$f; done
 	for f in ${BIN_PKG}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$f; done
 	rm -f $(DESTDIR)$(PREFIX)/bin/find-libprovides
-	rm -f $(DESTDIR)$(PREFIX)/bin/buildpkg-testing
+	for l in ${COMMITPKG_SYMS}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$l; done
 	for f in ${SHARED_PKG}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/$$f; done
 	for f in ${PATCHES}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/patches/$$f; done
 	for f in ${LIBS_PKG}; do rm -f $(DESTDIR)$(PREFIX)/lib/artools/$$f; done
@@ -197,7 +201,7 @@ uninstall_isobase:
 
 uninstall_iso:
 	for f in ${BIN_ISO}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$f; done
-	rm -f $(DESTDIR)$(PREFIX)/bin/buildiso-testing
+	rm -f $(DESTDIR)$(PREFIX)/bin/buildiso-gremlins
 	for f in ${SHARED_ISO}; do rm -f $(DESTDIR)$(PREFIX)/share/artools/$$f; done
 
 	for f in ${LIBS_ISO}; do rm -f $(DESTDIR)$(PREFIX)/lib/artools/$$f; done

bin/basestrap.in

@@ -32,7 +32,6 @@ usage() {
     echo "usage: ${0##*/} [options] root [packages...]"
     echo " -C <config>      Use an alternate config file for pacman"
     echo " -c               Use the package cache on the host, rather than the target"
-    echo " -d               Allow installation to a non-mountpoint directory"
     echo " -G               Avoid copying the host's pacman keyring to the target"
     echo " -i               Avoid auto-confirmation of package selections"
     echo " -M               Avoid copying the host's mirrorlist to the target"
@@ -47,12 +46,11 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts=':C:cdGiM'
+opts=':C:cGiM'
 
 while getopts ${opts} arg; do
     case "${arg}" in
         C) pacman_conf=$OPTARG ;;
-        d) directory=true ;;
         c) hostcache=true ;;
         i) interactive=true ;;
         G) copykeyring=false ;;
@@ -77,10 +75,6 @@ ${interactive} || pacman_args+=(--noconfirm)
 
 [[ -d $newroot ]] || die "%s is not a directory" "$newroot"
 
-if ! mountpoint -q "$newroot" && ! ${directory}; then
-    die '%s is not a mountpoint!' "$newroot"
-fi
-
 # create obligatory directories
 create_min_fs "$newroot"
 

bin/buildiso.in

@@ -24,24 +24,23 @@ prepare_build(){
 
     load_profile "${profile}"
 
-    local pac_arch='default' pacman_conf pac_conf
-    [[ "${target_arch}" == 'x86_64' ]] && pac_arch='lib32'
+    netgroups=${netgroups_url}/netgroups-${initsys}.yaml
 
-    if [[ ${stablility} == 'buildiso' ]];then
-        pac_conf=$pac_arch
-    else
-        pac_conf=$pac_arch-${stablility}
-    fi
+    local pacman_conf pac_file="pacman-default.conf"
 
-    pacman_conf="${DATADIR}/pacman-$pac_conf.conf"
-    [[ -f $AT_USERCONFDIR/pacman-$pac_conf.conf ]] && pacman_conf="$AT_USERCONFDIR/pacman-$pac_conf.conf"
+    case "${stablility}" in
+        'gremlins') pac_file="pacman-${stablility}.conf" ;;
+    esac
+
+    pacman_conf="${DATADIR}/$pac_file"
+    [[ -f $AT_USERCONFDIR/$pac_file ]] && pacman_conf="$AT_USERCONFDIR/$pac_file"
 
     iso_file=$(gen_iso_fn).iso
 
     mkchroot_args+=(-C ${pacman_conf})
     work_dir=${chroots_iso}/${profile}/${target_arch}
 
-    iso_dir="${cache_dir_iso}/${profile}"
+    iso_dir="${iso_pool}/${profile}"
 
     iso_root=${chroots_iso}/${profile}/iso
     mnt_dir=${chroots_iso}/${profile}/mnt
@@ -54,16 +53,15 @@ show_profile(){
     if ${verbose};then
         msg2 "autologin: %s" "${autologin}"
 
-        msg2 "netgroups: %s" "$(get_yaml)"
+        msg2 "netgroups: %s" "${netgroups}"
 
         msg2 "hostname: %s" "${hostname}"
         msg2 "username: %s" "${username}"
         msg2 "password: %s" "${password}"
         msg2 "addgroups: %s" "${addgroups}"
 
-        msg2 "enable_live: %s" "${enable_live[*]}"
-        msg2 "openrc_boot: %s" "${openrc_boot[*]}"
-        msg2 "openrc_default: %s" "${openrc_default[*]}"
+        msg2 "services_live: %s" "${services_live[*]}"
+        msg2 "services: %s" "${services[*]}"
     fi
 }
 
@@ -73,10 +71,10 @@ display_settings(){
 
     msg "OPTIONS:"
     msg2 "profile: %s" "${profile}"
-    msg2 "arch: %s" "${target_arch}"
     msg2 "initsys: %s" "${initsys}"
     msg2 "kernel: %s" "${kernel}"
     [[ -n ${gpgkey} ]] && msg2 "gpgkey: %s" "${gpgkey}"
+    msg2 "stablility: %s" "${stablility}"
 
     msg "ARGS:"
     msg2 "clean_first: %s" "${clean_first}"
@@ -144,11 +142,10 @@ stablility=${cmd##*-}
 usage() {
     echo "Usage: ${0##*/} [options]"
     echo "    -p <profile>       Profile [default: ${profile}]"
-    echo "    -a <arch>          Arch [default: ${target_arch}]"
     echo '    -r <dir>           Chroots directory'
     echo "                       [default: ${chroots_iso}]"
     echo '    -t <dir>           Target directory'
-    echo "                       [default: ${cache_dir_iso}]"
+    echo "                       [default: ${iso_pool}]"
     echo '    -k <name>          Kernel to use'
     echo "                       [default: ${kernel}]"
     echo '    -i <name>          Init system to use'
@@ -170,14 +167,13 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='p:a:r:t:k:i:g:czxmvqh'
+opts='p:r:t:k:i:g:czxmvqh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
         p) profile="$OPTARG" ;;
-        a) target_arch="$OPTARG" ;;
         r) chroots_iso="$OPTARG" ;;
-        t) cache_dir_iso="$OPTARG" ;;
+        t) iso_pool="$OPTARG" ;;
         k) kernel="$OPTARG" ;;
         i) initsys="$OPTARG" ;;
         g) gpgkey="$OPTARG" ;;

bin/buildpkg.in

@@ -20,16 +20,12 @@ SYSCONFDIR='@sysconfdir@'
 [[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
 import ${LIBDIR}/util.sh
 import ${LIBDIR}/util-chroot.sh
-import ${LIBDIR}/util-pkg.sh
 
 show_pkg(){
-    check_build "$1"
-    cd $1
-        source PKGBUILD
-        for n in ${pkgname[@]}; do
-            msg2 "%s" "$n"
-        done
-    cd ..
+    source PKGBUILD
+    for n in ${pkgname[@]}; do
+        msg2 "%s" "$n"
+    done
 }
 
 display_settings(){
@@ -37,18 +33,16 @@ display_settings(){
     show_config
 
     msg "OPTIONS:"
-    msg2 "arch: %s" "${target_arch}"
     msg2 "chroots_pkg: %s" "${chroots_pkg}"
     msg2 "repository: %s" "${repository}"
-    msg2 "stablility: %s" "${stablility}"
 
     msg "ARGS:"
     msg2 "create_first: %s" "${create_first}"
     msg2 "makepkg_args: %s" "${makepkg_args[*]}"
     msg2 "mkchrootpkg_args: %s" "${mkchrootpkg_args[*]}"
-
+    
     msg "BUILD:"
-    show_pkg "${package}"
+    show_pkg
 }
 
 load_user_info
@@ -61,62 +55,43 @@ pretend=false
 mkchroot_args=()
 mkchrootpkg_args=(-c -n)
 
-install_pkgs=()
-
-package=''
-cmd=${0##*/}
-stablility=${cmd##*-}
-repository=${PWD##*/}
-base_devel=('base-devel')
-
+repository='default'
+    
 prepare_build(){
-    local pac_arch='default' pac_conf=
+    local pac_file= mp_file='makepkg.conf'    
+            
+    base_devel=('base-devel')
+    
+    case ${repository} in
+        'system'|'world'|'galaxy') repository='default' ;;
+        lib32*) base_devel+=('multilib-devel') ;;
+        galaxy-gremlins|galaxy-goblins) repository=${repository#*-} ;;
+    esac
+    local pac_file="pacman-${repository}.conf"
 
-    if [[ "${target_arch}" == 'lib32' ]];then
-        pac_arch='lib32'
-        base_devel+=('multilib-devel')
-    fi
+    local pacman_conf="${DATADIR}/$pac_file"
+    [[ -f $AT_USERCONFDIR/$pac_file ]] && pacman_conf="$AT_USERCONFDIR/$pac_file"
 
-    if [[ ${stablility} == 'buildpkg' ]];then
-        pac_conf=$pac_arch
-    else
-        pac_conf=$pac_arch-${stablility}
-    fi
-
-    [[ "$pac_arch" == 'lib32' ]] && target_arch='x86_64'
-
-    local pacman_conf="${DATADIR}/pacman-$pac_conf.conf"
-    [[ -f $AT_USERCONFDIR/pacman-$pac_conf.conf ]] && pacman_conf="$AT_USERCONFDIR/pacman-$pac_conf.conf"
     work_dir="${chroots_pkg}/${repository}-${target_arch}"
 
-    local makepkg_conf="${DATADIR}/makepkg-${target_arch}.conf"
-    [[ -f $AT_USERCONFDIR/makepkg-${target_arch}.conf ]] && makepkg_conf="$AT_USERCONFDIR/makepkg-${target_arch}.conf"
+    local makepkg_conf="${DATADIR}/$mp_file"
+    [[ -f $AT_USERCONFDIR/$mp_file ]] && makepkg_conf="$AT_USERCONFDIR/$mp_file"
 
     mkchroot_args+=(-C "${pacman_conf}" -M "${makepkg_conf}" "${work_dir}/root")
 
     mkchrootpkg_args+=(-r "${work_dir}" "${makepkg_args[@]}")
-
-    timer_start=$(get_timer)
 }
 
 build(){
-    local timer_start=$(get_timer)
-    if [[ -f ${package}/PKGBUILD ]];then
-        cd ${package}
-    else
-        die "Directory must contain a PKGBUILD!"
-    fi
-    msg "Start building [%s] (%s)" "${package}" "${repository}"
+    local timer_start=$(get_timer) 
+
     exec mkchrootpkg "${mkchrootpkg_args[@]}"
     show_elapsed_time "${FUNCNAME}" "${timer_start}"
 }
 
 usage() {
     echo "Usage: ${0##*/} [options] -- [makepkg_args]"
-    echo "    -p <pkg>           Package to build [default: ${package}]"
-    echo "    -a <arch>          Arch [default: ${target_arch}]"
-    echo "    -r <dir>           Chroots directory [default: ${chroots_pkg}]"
-    echo '    -z <repo>          Repo name'
+    echo "    -r <dir>           Repository [default: ${repository}]"
     echo '    -c                 Create root chroot'
     echo '    -q                 Query settings and pretend build'
     echo '    -h                 This help'
@@ -128,14 +103,11 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='p:a:r:z:cqh'
+opts='r:cqh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
-        p) package="$OPTARG" ;;
-        a) target_arch="$OPTARG" ;;
-        r) chroots_pkg="$OPTARG" ;;
-        z) repository="$OPTARG" ;;
+        r) repository="$OPTARG" ;;
         c) create_first=true ;;
         q) pretend=true ;;
         h|?) usage 0 ;;
@@ -143,7 +115,6 @@ while getopts "${opts}" arg; do
     esac
 done
 
-# shift $(($OPTIND - 1))
 makepkg_args+=("${@:$OPTIND}")
 
 check_root
@@ -176,4 +147,4 @@ else
         pacman -Syu --noconfirm || abort
 fi
 
-build "${package}"
+build

bin/buildtree.in

@@ -18,49 +18,202 @@ DATADIR='@datadir@'
 [[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
 import ${LIBDIR}/util.sh
 import ${LIBDIR}/util-pkg.sh
-import ${LIBDIR}/util-pkg-tree.sh
+
+pull_tree_arch(){
+    cd ${tree_dir_arch}
+    for tree in packages community;do
+        if [[ -d ${tree} ]];then
+            cd ${tree}
+                msg "Checking (%s)" "${tree}"
+                pull_tree
+            cd ..
+        else
+            msg "Cloning (%s) ..." "$tree"
+            clone_tree "${host_tree_arch}/${tree}"
+        fi
+    done
+}
+
+pull_tree_artix(){
+    cd ${tree_dir_artix}
+    for tree in packages packages-galaxy;do
+        if [[ -d ${tree} ]];then
+            cd ${tree}
+                git config --bool pull.rebase true
+                msg "Checking (%s)" "${tree}"
+                pull_tree
+            cd ..
+        else
+            msg "Cloning (%s) ..." "$tree"
+            clone_tree "${host_tree_artix}/${tree}"
+        fi
+    done
+}
+
+show_version_table(){
+    msg_table_header "%-20s %-20s %-25s %-30s %-30s" "Arch Repo" "Artix Repo" "Package" "Arch version" "Artix version"
+    for tree in packages packages-galaxy;do
+        local git=$(find ${tree_dir_artix}/$tree/ -mindepth 1 -maxdepth 1 -type d)
+        for pkg_path in ${git[@]}; do
+            local artixrepo=$(find_repo "$pkg_path")
+            if [[ -d $pkg_path/repos/$artixrepo ]];then
+                source $pkg_path/trunk/PKGBUILD 2>/dev/null
+                local pkg=${pkg_path##*/}
+                local artixver=$(get_full_version $pkg)
+                local src=$(get_import_path "$tree" "$pkg")
+                local archrepo=$(find_repo "$src/$pkg")
+                if [[ -d $src/$pkg/repos/$archrepo ]];then
+                    source $src/$pkg/trunk/PKGBUILD 2>/dev/null
+                    local archver=$(get_full_version $pkg)
+                fi
+                if [ $(vercmp $artixver $archver) -lt 0 ];then
+                    local ar=$(arch_to_artix_repo "$artixrepo")
+                    ${upgrades} && msg_row_upgrade "%-20s %-20s %-25s %-30s %-30s" "${archrepo%-*}" "${ar}" "$pkg" "$archver" "$artixver"
+                fi
+                if [ $(vercmp $artixver $archver) -gt 0 ];then
+                    local ar=$(arch_to_artix_repo "$artixrepo")
+                    if [[ -n $archver ]] && [[ -n $archrepo ]];then
+                        ${downgrades} && msg_row_downgrade "%-20s %-20s %-25s %-30s %-30s" "${archrepo%-*}" "${ar}" "$pkg" "$archver" "$artixver"
+                    fi
+                fi
+                unset pkgver epoch pkgrel artixver archver _package
+            fi
+        done
+    done
+}
+
+show_artix_table(){
+     msg_table_header "%-20s %-20s %-25s %-30s %-30s" "Arch Repo" "Artix Repo" "Package" "Arch version" "Artix version"
+    for tree in packages packages-galaxy;do
+        local git=$(find ${tree_dir_artix}/$tree/ -mindepth 1 -maxdepth 1 -type d)
+        for pkg_path in ${git[@]}; do
+            local artixrepo=$(find_repo "$pkg_path")
+            if [[ -d $pkg_path/repos/$artixrepo ]];then
+                source $pkg_path/repos/$artixrepo/PKGBUILD 2>/dev/null
+                local pkg=${pkg_path##*/}
+                local artixver=$(get_full_version $pkg)
+                local src=$(get_import_path "$tree" "$pkg")
+                local archrepo=$(find_repo "$src/$pkg")
+                if [[ -d $src/$pkg/repos/$archrepo ]];then
+                    source $src/$pkg/repos/$archrepo/PKGBUILD 2>/dev/null
+                    local archver=$(get_full_version $pkg)
+                fi
+                if [ $(vercmp $artixver $archver) -eq 0 ] || [ $(vercmp $artixver $archver) -gt 0 ];then
+
+                    local ar=$(arch_to_artix_repo "$artixrepo")
+                    case $ar in
+                        *goblins)
+                            if [[ $archrepo == $artixrepo ]];then
+                                msg_row "%-20s %-20s %-25s %-30s %-30s" "${archrepo%-*}" "${ar}" "$pkg" "$archver" "$artixver"
+                            else
+                                msg_row_notify "%-20s %-20s %-25s %-30s %-30s" "${archrepo%-*}" "${ar}" "$pkg" "$archver" "$artixver"
+                            fi
+                        ;;
+                        *gremlins)
+                            if [[ $archrepo == $artixrepo ]];then
+                                msg_row "%-20s %-20s %-25s %-30s %-30s" "${archrepo%-*}" "${ar}" "$pkg" "$archver" "$artixver"
+                            else
+                                msg_row_notify "%-20s %-20s %-25s %-30s %-30s" "${archrepo%-*}" "${ar}" "$pkg" "$archver" "$artixver"
+                            fi
+                        ;;
+#                         system|world|galaxy|lib32) msg_row "%-20s %-20s %-25s %-30s %-30s" "${archrepo%-*}" "${ar}" "$pkg" "$archver" "$artixver" ;;
+                    esac
+                fi
+                unset pkgver epoch pkgrel artixver archver _package
+            fi
+        done
+    done
+}
+
+from_arch(){
+    local pkg="$1" archtree="$2" artixtree="$3" src= dest=
+    src=${tree_dir_arch}/$archtree/$pkg/trunk
+    dest=${tree_dir_artix}/$artixtree/$pkg/trunk
+
+    source $src/PKGBUILD 2>/dev/null
+    cd ${tree_dir_arch}/$archtree
+    msg "Package: %s" "$pkg"
+    local archver=$(get_full_version $pkg)
+    msg2 "Arch Version: %s" "$archver"
+
+    if [[ -d $dest ]];then
+        source $dest/PKGBUILD 2>/dev/null
+        cd ${tree_dir_artix}/$artixtree
+        local artixver=$(get_full_version $pkg)
+        msg2 "Artix Version: %s" "$artixver"
+        if [ $(vercmp $artixver $archver) -lt 0 ];then
+            info "Importing from archlinux (%s)" "$archtree"
+            rsync "${rsync_args[@]}" $src/ $dest/
+            patch_pkg "$pkg" "$tree"
+        else
+            warning "Versions match! Nothing to do!"
+        fi
+    else
+        cd ${tree_dir_artix}/$artixtree
+        info "Importing from archlinux (%s)" "$archtree"
+        mkdir $pkg
+        rsync "${rsync_args[@]}" $src/ $dest/
+        patch_pkg "$pkg" "$tree"
+    fi
+}
+
+sync_repos(){
+    pull_tree_arch
+    pull_tree_artix
+}
 
 display_settings(){
     show_version
     show_config
 
-    msg "REPOS:"
-    msg2 "repo_tree_arch: %s" "${repo_tree_arch[*]}"
-    msg2 "repo_tree_artix: %s" "${repo_tree_artix[*]}"
+    msg "OPTIONS:"
+    msg2 "package: %s" "${package}"
 
     msg "ARGS:"
-    msg2 "artix: %s" "${artix}"
-    msg2 "arch: %s" "${arch}"
+    msg2 "sync: %s" "${sync}"
     msg2 "compare: %s" "${compare}"
-    msg2 "import_arch: %s" "${import_arch}"
-    msg2 "gitpush: %s" "${gitpush}"
+    msg2 "upgrades: %s" "${upgrades}"
+    msg2 "downgrades: %s" "${downgrades}"
+    msg2 "artix: %s" "${artix}"
+    msg2 "import_packages: %s" "${import_packages}"
+    msg2 "import_community: %s" "${import_community}"
 
     msg "PATHS:"
     msg2 "tree_dir_artix: %s" "${tree_dir_artix}"
     msg2 "tree_dir_arch: %s" "${tree_dir_arch}"
-    msg2 "patches_dir: %s" "${patches_dir}"
 }
 
 load_user_info
 
 load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
+load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
+load_vars /etc/makepkg.conf
 
 pretend=false
-arch=false
-artix=false
+sync=false
 compare=false
-import_arch=false
-gitpush=false
+upgrades=true
+downgrades=false
+artix=false
+import_packages=false
+import_community=false
+package=''
 
-rsync_args=(-aWxv --progress --delete-before --no-R --no-implied-dirs)
+git_artix='packages'
+git_arch='packages'
+
+rsync_args=(-aWxvci --progress --delete-before --no-R --no-implied-dirs)
 
 usage() {
     echo "Usage: ${0##*/} [options]"
-    echo "    -a            Sync arch tree"
-    echo "    -s            Sync artix tree"
-    echo "    -c            Compare artix and arch versions"
-    echo '    -i            Import arch packages'
-    echo '    -p            Push import packages'
+    echo '    -p <pkg>      Package name'
+    echo "    -s            Clone or pull repos"
+    echo '    -c            Compare packages'
+    echo '    -u            Show upgrade packages'
+    echo '    -d            Show downgrade packages'
+    echo '    -a            Show artix specific packages'
+    echo '    -i            Import from arch packages'
+    echo '    -j            Import from arch community'
     echo '    -q            Query settings'
     echo '    -h            This help'
     echo ''
@@ -70,15 +223,18 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='aipscqh'
+opts='p:csudaijqh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
-        a) arch=true ;;
-        s) artix=true ;;
+        p) package="$OPTARG" ;;
+        s) sync=true ;;
         c) compare=true ;;
-        i) import_arch=true ;;
-        p) gitpush=true ;;
+        u) upgrades=false ;;
+        d) downgrades=true ;;
+        a) artix=true ;;
+        i) import_packages=true ;;
+        j) import_community=true; git_artix='packages-galaxy'; git_arch='community' ;;
         q) pretend=true ;;
         h|?) usage 0 ;;
         *) echo "invalid argument '${arg}'"; usage 1 ;;
@@ -89,14 +245,15 @@ shift $(($OPTIND - 1))
 
 prepare_dir "${tree_dir_artix}"
 prepare_dir "${tree_dir_arch}"
-prepare_dir "${patches_dir}"
 
 ${pretend} && display_settings && exit 1
 
-${artix} && sync_tree_artix
-
-${arch} && sync_tree_arch
+${sync} && sync_repos
 
 ${compare} && show_version_table
 
-${import_arch} && import_from_arch ${gitpush}
+${artix} && show_artix_table
+
+${import_packages} && from_arch "${package}" "${git_arch}" "${git_artix}"
+
+${import_community} && from_arch "${package}" "${git_arch}" "${git_artix}"

bin/buildyaml.in

@@ -1,107 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-version=@version@
-
-LIBDIR='@libdir@'
-DATADIR='@datadir@'
-SYSCONFDIR='@sysconfdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-yaml-check.sh
-import ${LIBDIR}/util-profile.sh
-
-show_profile(){
-    msg2 "yaml_dir: %s" "${yaml_dir}"
-    msg2 "autologin: %s" "${autologin}"
-
-    msg2 "netgroups: %s" "$(get_yaml)"
-
-    msg2 "hostname: %s" "${hostname}"
-    msg2 "username: %s" "${username}"
-    msg2 "password: %s" "${password}"
-    msg2 "addgroups: %s" "${addgroups}"
-
-    msg2 "enable_live: %s" "${enable_live[*]}"
-    msg2 "openrc_boot: %s" "${openrc_boot[*]}"
-    msg2 "openrc_default: %s" "${openrc_default[*]}"
-}
-
-display_settings(){
-    show_version
-    show_config
-
-    msg "OPTIONS:"
-    msg2 "profile: %s" "${profile}"
-    msg2 "arch: %s" "${target_arch}"
-    msg2 "initsys: %s" "${initsys}"
-    msg2 "kernel: %s" "${kernel}"
-
-    msg "ARGS:"
-    msg2 "group: %s" "${group}"
-    msg2 "calamares: %s" "${calamares}"
-
-    msg "BUILD:"
-    show_profile
-}
-
-load_user_info
-
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-
-pretend=false
-group=false
-cache_dir_netinstall="${workspace_dir}/netinstall"
-calamares=false
-
-usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo "    -p <profile>       Buildset or profile [default: ${profile}]"
-    echo "    -a <arch>          Arch [default: ${target_arch}]"
-    echo "    -k <name>          Kernel to use[default: ${kernel}]"
-    echo "    -i <name>          Init system to use [default: ${initsys}]"
-    echo '    -g                 Enable pacman group accepted for -p'
-    echo '    -c                 Check also calamares yaml files generated for the profile'
-    echo '    -q                 Query settings'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
-    exit $1
-}
-
-orig_argv=("$0" "$@")
-
-opts='p:a:i:k:gcqh'
-
-while getopts "${opts}" arg; do
-    case "${arg}" in
-        p) profile="$OPTARG" ;;
-        a) target_arch="$OPTARG" ;;
-        i) initsys="$OPTARG" ;;
-        k) kernel="$OPTARG" ;;
-        g) group=true ;;
-        c) calamares=true ;;
-        q) pretend=true ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
-    esac
-done
-
-shift $(($OPTIND - 1))
-
-prepare_build
-
-${pretend} && display_settings && exit 1
-
-${group} && write_pacman_group_yaml "${profile}" && exit 0
-
-build

bin/chroot-run.in

@@ -11,6 +11,8 @@
 
 version=@version@
 
+chroot_version=@chroot_version@
+
 LIBDIR='@libdir@'
 
 [[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
@@ -87,11 +89,12 @@ copy_hostconf () {
         cp -T "$file" "$working_dir$file"
     done
 
-    sed -r "s|^#?\\s*CacheDir.+|CacheDir = $(echo -n ${cache_dirs[@]})|g" -i "$1/etc/pacman.conf"
+    sed -r "s|^#?\\s*CacheDir.+|CacheDir = ${cache_dirs[*]}|g" -i "$1/etc/pacman.conf"
 }
 
 chroot_extra_mount() {
     chroot_mount "/etc/resolv.conf" "$1/etc/resolv.conf" -B
+    chroot_mount "/etc/hosts" "$1/etc/hosts" -B
     chroot_mount_conditional "[[ -e $1/etc/machine-id ]]" "/etc/machine-id" "$1/etc/machine-id" -B
     chroot_mount "${cache_dirs[0]}" "$1${cache_dirs[0]}" -B
 
@@ -113,8 +116,8 @@ umask 0022
 # Sanity check
 if [[ ! -f "$working_dir/.artools" ]]; then
     die "'%s' does not appear to be an artix chroot." "$working_dir"
-elif [[ $(cat "$working_dir/.artools") != $version ]]; then
-    die "chroot '%s' is not at version %s. Please rebuild." "$working_dir" "$version"
+elif [[ $(cat "$working_dir/.artools") != $chroot_version ]]; then
+    die "chroot '%s' is not at version %s. Please rebuild." "$working_dir" "$chroot_version"
 fi
 
 chroot_api_mount "${working_dir}" || die "failed to setup API filesystems in chroot %s" "${working_dir}"

bin/commitpkg.in

@@ -0,0 +1,172 @@
+#!/bin/bash
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+version=@version@
+
+LIBDIR='@libdir@'
+SYSCONFDIR='@sysconfdir@'
+DATADIR='@datadir@'
+
+[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
+import ${LIBDIR}/util.sh
+import ${LIBDIR}/util-pkg.sh
+
+commit_pkg(){
+    local git_tree=$(find_tree "${tree_dir_artix}" "${package}")
+    if [[ -n ${git_tree} ]];then
+        cd ${tree_dir_artix}/${git_tree}
+
+        msg "Checking (%s)" "${git_tree}"
+        pull_tree
+
+        cd ${package}
+
+        source trunk/PKGBUILD
+        [[ $arch == 'any' ]] && CARCH=any
+        local ver=$(get_full_version "${package}")
+
+        if ${remove};then
+            local action='remove'
+            if [[ "${source_repo}" == 'trunk' ]];then
+                local pkg=${package}
+                git rm -r trunk
+            else
+                local pkg=${package}-$ver
+                git rm -r repos/${source_repo}-$CARCH
+            fi
+            msg "Action: [%s] '%s' %s" "${source_repo}" "$pkg" "${action}"
+            git commit -m "[${source_repo}] '$pkg' ${action}"
+            ${push} && push_tree
+        else
+            local action='modify'
+            msg "Action: [%s] '%s' %s" "${source_repo}" "${package}-$ver" "${action}"
+            git add .
+            git commit -m "[${source_repo}] '${package}-$ver' ${action}"
+            ${push} && push_tree
+        fi
+    else
+        error "Package '%s' does not exist!" "${package}"
+    fi
+}
+
+symlink_commit_pkg(){
+    local git_tree=$(find_tree "${tree_dir_artix}" "${package}")
+    if [[ -n ${git_tree} ]];then
+        cd ${tree_dir_artix}/${git_tree}
+
+        msg "Checking (%s)" "${git_tree}"
+        pull_tree
+
+        cd ${package}
+
+        source trunk/PKGBUILD
+        [[ $arch == 'any' ]] && CARCH=any
+        local ver=$(get_full_version "${package}")
+
+        if [[ ${source_repo} == 'trunk' ]];then
+            local action='add'
+            local dest=${target_repo}-$CARCH
+
+            [[ ! -d repos ]] && mkdir repos
+            cd repos
+                [[ -d $dest ]] && git rm -r $dest
+            cd ..
+            cp -r trunk repos/$dest
+        else
+            local action='move'
+            local dest=${target_repo}-$CARCH
+
+            cd repos
+                [[ -d $dest ]] && git rm -r $dest
+                git mv ${source_repo}-$CARCH $dest
+            cd ..
+        fi
+
+        msg "Action: [%s] -> [%s] '%s' %s" "${source_repo}" "${target_repo}" "${package}-$ver" "${action}"
+        git add .
+        git commit -m "[${source_repo}] -> [${target_repo}] '${package}-$ver' ${action}"
+        ${push} && push_tree
+    else
+        error "Package '%s' does not exist!" "${package}"
+    fi
+}
+
+display_settings(){
+    show_version
+    show_config
+
+    msg "OPTIONS:"
+    msg2 "source_repo: %s" "${source_repo}"
+    msg2 "target_repo: %s" "${target_repo}"
+    msg2 "package: %s" "${package}"
+
+    msg "ARGS:"
+    msg2 "remove: %s" "${remove}"
+    msg2 "push: %s" "${push}"
+}
+
+load_user_info
+
+load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
+load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
+load_vars /etc/makepkg.conf
+
+source_repo='trunk'
+package=''
+remove=false
+push=false
+pretend=false
+
+cmd=${0##*/}
+target_repo=${cmd%pkg}
+
+usage() {
+    echo "Usage: ${0##*/} [options]"
+    echo "    -s <name>          Source repository [default:${source_repo}]"
+    echo '    -p <pkg>           Package name'
+    echo '    -r                 Delete from repo (commitpkg only)'
+    echo '    -u                 Push'
+    echo '    -q                 Query settings and pretend'
+    echo '    -h                 This help'
+    echo ''
+    echo ''
+    exit $1
+}
+
+orig_argv=("$0" "$@")
+
+opts='p:s:urqh'
+
+while getopts "${opts}" arg; do
+    case "${arg}" in
+        s) source_repo="$OPTARG" ;;
+        p) package="$OPTARG" ;;
+        r) remove=true ;;
+        u) push=true ;;
+        q) pretend=true ;;
+        h|?) usage 0 ;;
+        *) echo "invalid argument '${arg}'"; usage 1 ;;
+    esac
+done
+
+shift $(($OPTIND - 1))
+
+${pretend} && display_settings && exit 1
+
+if $(is_valid_repo "${source_repo}");then
+    if [[ "${cmd}" == 'commitpkg' ]];then
+        commit_pkg
+    else
+        symlink_commit_pkg
+    fi
+else
+    error "source repository '%s' is not valid!" "${source_repo}"
+fi

bin/deployiso.in

@@ -78,7 +78,7 @@ opts='p:l:uvtqh'
 while getopts "${opts}" arg; do
     case "${arg}" in
         p) profile="$OPTARG" ;;
-        l) limit="$OPTARG" ;;
+        l) uplimit="$OPTARG" ;;
         u) update=true; rsync_args+=(-u) ;;
         t) torrent=true ;;
         v) verbose=true; rsync_args+=(-v --stats) ;;

bin/deploypkg.in

@@ -16,7 +16,44 @@ SYSCONFDIR='@sysconfdir@'
 
 [[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
 import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-pkg-publish.sh
+import ${LIBDIR}/util-pkg.sh
+
+del_from_repo(){
+    local ver
+    local repo="$1"
+    local repo_path=${repos_root}/$repo/os/${target_arch}
+    source PKGBUILD
+    for name in ${pkgname[@]};do
+        [[ $arch == any ]] && CARCH=any
+        ver=$(get_full_version $name)
+        if pkgfile=$(find_cached_package "$name" "$ver" "$CARCH");then
+            info "pkgfile: %s" "${pkgfile##*/}"
+            repo-remove -R $repo_path/$repo.db.tar.xz $name
+            [[ -e $repo_path/${pkgfile##*/} ]] && rm -v $repo_path/${pkgfile##*/}
+            [[ -e $repo_path/${pkgfile##*/}.sig ]] && rm -v $repo_path/${pkgfile##*/}.sig
+        fi
+    done
+}
+
+add_to_repo(){
+    local ver pkgfile=
+    local repo="$1"
+    local repo_path=${repos_root}/$repo/os/${target_arch}
+    source PKGBUILD
+    for name in ${pkgname[@]};do
+        [[ $arch == any ]] && CARCH=any
+        ver=$(get_full_version $name)
+        if pkgfile=$(find_cached_package "$name" "$ver" "$CARCH"); then
+            info "pkgfile: %s" "${pkgfile##*/}"
+            if ${sign_pkg};then
+                [[ -e ${pkgfile}.sig ]] && rm ${pkgfile}.sig
+                signfile ${pkgfile}
+            fi
+            ln -sf ${pkgfile}{,.sig} $repo_path/
+            repo-add -R $repo_path/$repo.db.tar.xz $pkgfile
+        fi
+    done
+}
 
 display_settings(){
     show_version
@@ -24,14 +61,11 @@ display_settings(){
 
     msg "OPTIONS:"
     msg2 "repository: %s" "${repository}"
-    msg2 "to_repository: %s" "${to_repository}"
-    msg2 "package: %s" "${package[@]}"
-    msg2 "target_arch: %s" "${target_arch}"
 
     msg "ARGS:"
     msg2 "add_pkg: %s" "${add_pkg}"
     msg2 "del_pkg: %s" "${del_pkg}"
-    msg2 "move_pkg: %s" "${move_pkg}"
+    msg2 "sign_pkg: %s" "${sign_pkg}"
 }
 
 load_user_info
@@ -43,22 +77,15 @@ load_vars /etc/makepkg.conf
 pretend=false
 add_pkg=false
 del_pkg=false
-move_pkg=false
-package=''
-repository=${PWD##*/}
-to_repository=${PWD##*/}
-
-rsync_args=(-rtxisP --progress --delete -e ssh)
+repository=
+sign_pkg=false
 
 usage() {
     echo "Usage: ${0##*/} [options]"
-    echo "    -a                 Repository arch [default:${target_arch}]"
-    echo "    -r                 Repository [default:${repository}]"
-    echo "    -t                 Repository to move to [default:${to_repository}]"
-    echo "    -p                 Package name to add/delete"
-    echo '    -x                 Add package to repository'
-    echo '    -y                 Delete package from repository'
-    echo '    -m                 Move packages from source to destination repository'
+    echo "    -d                 Destination repository [default:${repository}]"
+    echo '    -a                 Add package to repository'
+    echo '    -r                 Remove package from repository'
+    echo '    -s                 Sign package'
     echo '    -q                 Query settings and pretend upload'
     echo '    -h                 This help'
     echo ''
@@ -68,17 +95,14 @@ usage() {
 
 orig_argv=("$0" "$@")
 
-opts='p:a:r:t:xymqh'
+opts='d:arsqh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
-        a) target_arch="$OPTARG" ;;
-        r) repository="$OPTARG" ;;
-        p) package="$OPTARG" ;;
-        t) to_repository="$OPTARG" ;;
-        m) move_pkg=true ;;
-        x) add_pkg=true ;;
-        y) del_pkg=true ;;
+        d) repository="$OPTARG" ;;
+        a) add_pkg=true ;;
+        r) del_pkg=true ;;
+        s) sign_pkg=true ;;
         q) pretend=true ;;
         h|?) usage 0 ;;
         *) echo "invalid argument '${arg}'"; usage 1 ;;
@@ -87,16 +111,12 @@ done
 
 shift $(($OPTIND - 1))
 
-timer_start=$(get_timer)
-
 prepare_dir "${repos_root}"
 
 ${pretend} && display_settings && exit 1
 
-${move_pkg} && move_to_repo "${repository}" "${to_repository}" "${target_arch}"
+${del_pkg} && del_from_repo "${repository}"
 
-${del_pkg} && del_from_repo "${repository}" "${target_arch}" "${package}"
-
-${add_pkg} && add_to_repo "${repository}" "${target_arch}" "${package}"
+${add_pkg} && add_to_repo "${repository}"
 
 exit 0

bin/findupdates.in

@@ -1,53 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-version=@version@
-
-LIBDIR='@libdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-pkg.sh
-import ${LIBDIR}/util-pkg-tree.sh
-
-load_user_info
-
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-
-declare -A UPDATES
-msg_table_header "%-30s %-30s %-30s %-30s" "Repository" "Package" "Artix version" "Arch version"
-for repo in ${repo_tree_artix[@]}; do
-    for pkg in ${tree_dir_artix}/$repo/*; do
-        if [[ -f $pkg/PKGBUILD ]];then
-            source $pkg/PKGBUILD 2>/dev/null
-            package=${pkg##*/}
-            artixver=$(get_full_version $package)
-            set_import_path "$repo" "$package"
-            if [[ -f $src/PKGBUILD ]];then
-                source $src/PKGBUILD 2>/dev/null
-                archver=$(get_full_version $package)
-            fi
-            if [ $(vercmp $artixver $archver) -lt 0 ];then
-                UPDATES[$package]="$src/PKGBUILD $pkg/PKGBUILD"
-                msg_row_update "%-30s %-30s %-30s %-30s" "$repo" "$package" "$artixver" "$archver"
-            else
-                msg_row "%-30s %-30s %-30s %-30s" "$repo" "$package" "$artixver" "$archver"
-            fi
-        fi
-        unset pkgver epoch pkgrel artixver archver package
-    done
-done
-
-for upd in "${!UPDATES[@]}"; do
-    msg "Diff: %s" "$upd"
-    diff -u ${UPDATES[$upd]}
-done

bin/fstabgen.in

@@ -64,6 +64,13 @@ optstring_apply_quirks() {
     # one might install Arch from a Fedora environment), so let's remove it.
     optstring_remove_option "$varname" seclabel
 
+    # Prune 'relatime' option for any pseudofs. This seems to be a rampant
+    # default which the kernel often exports even if the underlying filesystem
+    # doesn't support it. Example: https://bugs.archlinux.org/task/54554.
+    if awk -v fstype="$fstype" '$1 == fstype { exit 1 }' /proc/filesystems; then
+        optstring_remove_option "$varname" relatime
+    fi
+
     case $fstype in
         f2fs)
         # These are Kconfig options for f2fs. Kernels supporting the options will

bin/mkchroot.in

@@ -11,6 +11,8 @@
 
 version=@version@
 
+chroot_version=@chroot_version@
+
 LIBDIR='@libdir@'
 
 [[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
@@ -71,7 +73,7 @@ else
     cache_dirs=(${cache_dir})
 fi
 
-basestrap_args=(-Gcd ${pacman_conf:+-C "$pacman_conf"})
+basestrap_args=(-Gc ${pacman_conf:+-C "$pacman_conf"})
 [[ -n ${mirror} ]] && basestrap_args+=(-M)
 
 umask 0022
@@ -104,7 +106,7 @@ done < <(declare -x | sed -r 's/^declare -x ([^=]*)=.*/\1/' | grep -i '_proxy$')
 env -i "${_env[@]}" \
 basestrap "${basestrap_args[@]}" "$working_dir" ${cache_dirs[@]/#/--cachedir=} "$@" || die 'Failed to install all packages'
 
-echo "$version" > "$working_dir/.artools"
+echo "$chroot_version" > "$working_dir/.artools"
 
 default_locale "set" "$working_dir"
 

bin/mkchrootpkg.in

@@ -19,29 +19,6 @@ import ${LIBDIR}/util-chroot.sh
 
 shopt -s nullglob
 
-init_variables() {
-    default_makepkg_args=(--syncdeps --noconfirm --log --holdver --skipinteg)
-    makepkg_args=("${default_makepkg_args[@]}")
-    keepbuilddir=false
-    update_first=false
-    clean_first=false
-    run_namcap=false
-    temp_chroot=false
-    chrootdir=
-    passeddir=
-    makepkg_user=
-    declare -ga install_pkgs
-    declare -gi ret=0
-
-    bindmounts_ro=()
-    bindmounts_rw=()
-
-    copy=$USER
-    [[ -n ${SUDO_USER:-} ]] && copy=$SUDO_USER
-    [[ -z "$copy" || $copy = root ]] && copy=copy
-    src_owner=${SUDO_USER:-$USER}
-}
-
 usage() {
     echo "Usage: ${0##*/} [options] -r <chrootdir> [--] [makepkg args]"
     echo ' Run this script in a PKGBUILD dir to build a package inside a'
@@ -169,7 +146,7 @@ prepare_chroot() {
     local keepbuilddir=$3
     local run_namcap=$4
 
-    $keepbuilddir || rm -rf "$copydir/build"
+    [[ $keepbuilddir = true ]] || rm -rf "$copydir/build"
 
     local builduser_uid="${SUDO_UID:-$UID}"
     local builduser_gid="$(id -g "$builduser_uid")"
@@ -208,9 +185,10 @@ EOF
     {
         printf '#!/bin/bash\n'
         declare -f _chrootbuild
+        declare -p SOURCE_DATE_EPOCH 2>/dev/null || true
         printf '_chrootbuild "$@" || exit\n'
 
-        if $run_namcap; then
+        if [[ $run_namcap = true ]]; then
             declare -f _chrootnamcap
             printf '_chrootnamcap || exit\n'
         fi
@@ -221,10 +199,17 @@ EOF
 # These functions aren't run in makechrootpkg,
 # so no global variables
 _chrootbuild() {
+    # No coredumps
+    ulimit -c 0
+
     exec </dev/console
-    export LANG=en_US.UTF-8
+
     . /etc/profile
-    sudo -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
+
+    export LANG=en_US.UTF-8
+    locale-gen &> /dev/null
+
+    sudo --preserve-env=SOURCE_DATE_EPOCH -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
 }
 
 _chrootnamcap() {
@@ -241,17 +226,16 @@ _chrootnamcap() {
 #  - USER
 download_sources() {
     local copydir=$1
-    local src_owner=$2
+    local makepkg_user=$2
 
-    local builddir="$(mktemp -d)"
+    local builddir
+    builddir="$(mktemp -d)"
     chmod 1777 "$builddir"
 
     # Ensure sources are downloaded
-    makepkg_user=${makepkg_user:-$SUDO_USER}
     sudo -u "$makepkg_user" env SRCDEST="$SRCDEST" BUILDDIR="$builddir" \
-    makepkg --config="$copydir/etc/makepkg.conf" --verifysource -o ||
-    die "Could not download sources."
-    (( $? != 0 )) && die "Could not download sources."
+        makepkg --config="$copydir/etc/makepkg.conf" --verifysource -o ||
+        die "Could not download sources."
 
     # Clean up garbage from verifysource
     rm -rf "$builddir"
@@ -286,6 +270,11 @@ move_products() {
     for s in "$copydir"/srcpkgdest/*; do
         chown "$src_owner" "$s"
         mv "$s" "$SRCPKGDEST"
+
+        # Fix broken symlink because of temporary chroot SRCPKGDEST /srcpkgdest
+        if [[ "$PWD" != "$SRCPKGDEST" && -L "$PWD/${s##*/}" ]]; then
+            ln -sf "$SRCPKGDEST/${s##*/}"
+        fi
     done
 }
 # }}}
@@ -293,7 +282,26 @@ move_products() {
 orig_argv=("$0" "$@")
 
 main() {
-    init_variables
+    default_makepkg_args=(--syncdeps --noconfirm --log --holdver --skipinteg)
+    makepkg_args=("${default_makepkg_args[@]}")
+    keepbuilddir=false
+    update_first=false
+    clean_first=false
+    run_namcap=false
+    temp_chroot=false
+    chrootdir=
+    passeddir=
+    makepkg_user=
+    declare -ga install_pkgs
+    declare -gi ret=0
+
+    bindmounts_ro=()
+    bindmounts_rw=()
+
+    copy=$USER
+    [[ -n ${SUDO_USER:-} ]] && copy=$SUDO_USER
+    [[ -z "$copy" || $copy = root ]] && copy=copy
+    src_owner=${SUDO_USER:-$USER}
 
     local opts='hcur:I:l:nTD:d:U:'
 
@@ -380,7 +388,7 @@ main() {
 
     download_sources "$copydir" "$src_owner"
 
-    prepare_chroot "$copydir" "$USER_HOME" "$keepbuilddir"
+    prepare_chroot "$copydir" "$USER_HOME" "$keepbuilddir" "$run_namcap"
 
     bindmounts_rw+=("${PWD}:/startdir" "${SRCDEST}:/srcdest")
 

bin/signfile.in

@@ -18,8 +18,6 @@ import ${LIBDIR}/util.sh
 
 load_user_info
 
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-
 load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
 load_vars /etc/makepkg.conf
 
@@ -34,9 +32,5 @@ msg2 "Signing [%s] with key %s" "${file_to_sign##*/}" "${GPGKEY}..."
 if [[ -n "${BUILDBOT_GPGP}" ]]; then
     gpg --batch --passphrase "${BUILDBOT_GPGP}" --detach-sign "$file_to_sign"
 else
-    if [[ -f /usr/bin/hellhound ]]; then
-        gpg --batch --passphrase $(hellhound retrieve) --detach-sign "$file_to_sign"
-    else
-        gpg --detach-sign --use-agent -u "${GPGKEY}" "$file_to_sign"
-    fi
+    gpg --detach-sign --use-agent -u "${GPGKEY}" "$file_to_sign"
 fi

data/Jenkinsfile.galaxy

@@ -0,0 +1,274 @@
+def ADD_REPO = ''
+def RM_REPO = ''
+def IS_ADD = 'false'
+def IS_REMOVE = 'false'
+def IS_BUILD = 'false'
+def PKG_TRUNK = ''
+def PKG_PATH = ''
+
+pipeline {
+    agent any
+    options {
+        skipDefaultCheckout()
+        timestamps()
+    }
+    stages {
+        stage('Checkout') {
+            steps {
+                script {
+                    checkout scm
+
+                    def currentCommit = sh(returnStdout: true, script: 'git rev-parse @').trim()
+                    echo "currentCommit: ${currentCommit}"
+
+                    def changedFilesStatus = sh(returnStdout: true, script: "git show --pretty=format: --name-status ${currentCommit}").tokenize('\n')
+                    def changedPkgStatus = []
+                    def pkgPath = []
+                    int entryCount = 0
+                    for ( int i = 0; i < changedFilesStatus.size(); i++ ) {
+                        def entry = changedFilesStatus[i].split()
+                        def fileStatus = entry[0]
+                        entryCount = entry.size()
+                        for ( int j = 1; j < entry.size(); j++ ) {
+                            if ( entry[j].contains('/PKGBUILD') && entry[j].contains('/repos') ){
+                                changedPkgStatus << "${fileStatus} " + entry[j].minus('/PKGBUILD')
+                                pkgPath << entry[j].minus('/PKGBUILD')
+                            }
+                        }
+                    }
+
+                    int pkgCount = changedPkgStatus.size()
+                    int pkgPathCount = pkgPath.size()
+                    echo "pkgCount: ${pkgCount}"
+                    echo "entryCount: ${entryCount}"
+                    echo "pkgPathCount: ${pkgPathCount}"
+                    echo "changedPkgStatus: ${changedPkgStatus}"
+
+                    if ( pkgCount > 0 ) {
+
+                        if ( entryCount == 2 && pkgCount == 2 ) {
+                            def pkgEntry1 = changedPkgStatus[0].split()
+                            def pkgEntry2 = changedPkgStatus[1].split()
+                            def srcPath = []
+                            def pkgStatus = []
+                            srcPath << pkgEntry1[1]
+                            srcPath << pkgEntry2[1]
+                            pkgStatus << pkgEntry1[0]
+                            pkgStatus << pkgEntry2[0]
+                            def buildInfo1 = srcPath[0].tokenize('/')
+                            def buildInfo2 = srcPath[1].tokenize('/')
+
+                            if ( pkgStatus[0] == "M" ) {
+                                IS_ADD = 'true'
+                                if ( srcPath[0].contains('community-testing') ) {
+                                    ADD_REPO = 'galaxy-gremlins'
+                                } else if ( srcPath[0].contains('community-x86_64') || srcPath[0].contains('community-any') ) {
+                                    ADD_REPO = 'galaxy'
+                                }
+                                if ( srcPath[0].contains('multilib-testing') ) {
+                                    ADD_REPO = 'lib32-gremlins'
+                                } else if ( srcPath[0].contains('multilib-x86_64') ) {
+                                    ADD_REPO = 'lib32'
+                                }
+                            } else if ( pkgStatus[1] == "M" ) {
+                                IS_ADD = 'true'
+                                if ( srcPath[1].contains('community-testing') ) {
+                                    ADD_REPO = 'galaxy-gremlins'
+                                } else if ( srcPath[1].contains('community-x86_64') || srcPath[1].contains('community-any') ) {
+                                    ADD_REPO = 'galaxy'
+                                }
+                                if ( srcPath[1].contains('multilib-testing') ) {
+                                    ADD_REPO = 'lib32-gremlins'
+                                } else if ( srcPath[1].contains('multilib-x86_64') ) {
+                                    ADD_REPO = 'lib32'
+                                }
+                            }
+
+                            if ( pkgStatus[0] == "D" ) {
+                                IS_REMOVE = 'true'
+                                if ( srcPath[0].contains('community-testing') ) {
+                                    RM_REPO = 'galaxy-gremlins'
+                                } else if ( srcPath[0].contains('community-x86_64') || srcPath[0].contains('community-any') ) {
+                                    RM_REPO = 'galaxy'
+                                }
+                                if ( srcPath[0].contains('multilib-testing') ) {
+                                    RM_REPO = 'lib32-gremlins'
+                                } else if ( srcPath[0].contains('multilib-x86_64') ) {
+                                    RM_REPO = 'lib32'
+                                }
+                            } else if ( pkgStatus[1] == "D" ) {
+                                IS_REMOVE = 'true'
+                                if ( srcPath[1].contains('community-testing') ) {
+                                    RM_REPO = 'galaxy-gremlins'
+                                } else if ( srcPath[1].contains('community-x86_64') || srcPath[1].contains('community-any') ) {
+                                    RM_REPO = 'galaxy'
+                                }
+                                if ( srcPath[1].contains('multilib-testing') ) {
+                                    RM_REPO = 'lib32-gremlins'
+                                } else if ( srcPath[1].contains('multilib-x86_64') ) {
+                                    RM_REPO = 'lib32'
+                                }
+                            }
+
+
+
+                            PKG_TRUNK = buildInfo1[0] + '/trunk'
+                        }
+
+                        if ( entryCount == 3 && pkgCount == 2 ) {
+                            def pkgEntry = changedPkgStatus[0].split()
+                            def pkgStatus = pkgEntry[0]
+                            def buildInfo1 = pkgPath[0].tokenize('/')
+                            def buildInfo2 = pkgPath[1].tokenize('/')
+
+                            if ( pkgStatus.contains('R') ) {
+                                IS_ADD = 'true'
+                                IS_REMOVE = 'true'
+
+                                if ( pkgPath[0].contains('community-staging') && pkgPath[1].contains('community-testing') ) {
+                                    ADD_REPO = 'galaxy-gremlins'
+                                    RM_REPO = 'galaxy-goblins'
+                                } else if ( pkgPath[0].contains('community-testing') && pkgPath[1].contains('community-staging') ) {
+                                    ADD_REPO = 'galaxy-goblins'
+                                    RM_REPO = 'galaxy-gremlins'
+                                }
+
+                                if ( pkgPath[0].contains('community-testing') && pkgPath[1].contains('community-x86_64') || pkgPath[0].contains('community-any') ) {
+                                    ADD_REPO = 'galaxy-gremlins'
+                                    RM_REPO = 'galaxy'
+                                } else if ( pkgPath[0].contains('community-x86_64') || pkgPath[0].contains('community-any') && pkgPath[1].contains('community-testing') ) {
+                                    ADD_REPO = 'galaxy'
+                                    RM_REPO = 'galaxy-gremlins'
+                                }
+
+                                if ( pkgPath[0].contains('multilib-staging') && pkgPath[1].contains('multilib-testing') ) {
+                                    ADD_REPO = 'lib32-gremlins'
+                                    RM_REPO = 'lib32-goblins'
+                                } else if ( pkgPath[0].contains('multilib-testing') && pkgPath[1].contains('multilib-staging') ) {
+                                    ADD_REPO = 'lib32-goblins'
+                                    RM_REPO = 'lib32-gremlins'
+                                }
+
+                                if ( pkgPath[0].contains('multilib-testing') && pkgPath[1].contains('multilib-x86_64') ) {
+                                    ADD_REPO = 'lib32'
+                                    RM_REPO = 'lib32-gremlins'
+                                } else if ( pkgPath[0].contains('multilib-x86_64') && pkgPath[1].contains('multilib-testing') ) {
+                                    ADD_REPO = 'lib32-gremlins'
+                                    RM_REPO = 'lib32'
+                                }
+                            }
+                            PKG_TRUNK = buildInfo1[0] + '/trunk'
+                        }
+
+                        if ( pkgCount == 1 ) {
+                            def pkgEntry = changedPkgStatus[0].split()
+                            def pkgStatus = pkgEntry[0]
+                            def srcPath = pkgEntry[1]
+                            def buildInfo = srcPath.tokenize('/')
+
+                            if ( srcPath.contains('community-staging') ) {
+                                if ( pkgStatus == 'A' || pkgStatus == 'M' ) {
+                                    IS_BUILD = 'true'
+                                }
+                                if ( pkgStatus == 'D' ) {
+                                    IS_REMOVE = 'true'
+                                }
+                                ADD_REPO = 'galaxy-goblins'
+                                RM_REPO = ADD_REPO
+                            } else if ( srcPath.contains('community-testing') ) {
+                                if ( pkgStatus == 'A' || pkgStatus == 'M' ) {
+                                    IS_BUILD = 'true'
+                                }
+                                if ( pkgStatus == 'D' ) {
+                                    IS_REMOVE = 'true'
+                                }
+                                ADD_REPO = 'galaxy-gremlins'
+                                RM_REPO = ADD_REPO
+                            } else if ( srcPath.contains('community-x86_64') || srcPath.contains('community-any') ) {
+                                if ( pkgStatus == 'A' || pkgStatus == 'M' ) {
+                                    IS_BUILD = 'true'
+                                }
+                                if ( pkgStatus == 'D' ) {
+                                    IS_REMOVE = 'true'
+                                }
+                                ADD_REPO = 'galaxy'
+                                RM_REPO = ADD_REPO
+                            }
+                            if ( srcPath.contains('multilib-staging') ) {
+                                if ( pkgStatus == 'A' || pkgStatus == 'M' ) {
+                                    IS_BUILD = 'true'
+                                }
+                                if ( pkgStatus == 'D' ) {
+                                    IS_REMOVE = 'true'
+                                }
+                                ADD_REPO = 'lib32-goblins'
+                                RM_REPO = ADD_REPO
+                            } else if ( srcPath.contains('multilib-testing') ) {
+                                if ( pkgStatus == 'A' || pkgStatus == 'M' ) {
+                                    IS_BUILD = 'true'
+                                }
+                                if ( pkgStatus == 'D' ) {
+                                    IS_REMOVE = 'true'
+                                }
+                                ADD_REPO = 'lib32-gremlins'
+                                RM_REPO = ADD_REPO
+                            } else if ( srcPath.contains('multilib-x86_64') ) {
+                                if ( pkgStatus == 'A' || pkgStatus == 'M' ) {
+                                    IS_BUILD = 'true'
+                                }
+                                if ( pkgStatus == 'D' ) {
+                                    IS_REMOVE = 'true'
+                                }
+                                ADD_REPO = 'lib32'
+                                RM_REPO = ADD_REPO
+                            }
+                            PKG_PATH = srcPath
+                            PKG_TRUNK = buildInfo[0] + '/trunk'
+                        }
+
+                    }
+                }
+            }
+        }
+        stage('Build') {
+            environment {
+                BUILDBOT_GPGP = credentials('BUILDBOT_GPGP')
+            }
+            when {
+                expression { return  IS_BUILD == 'true' }
+            }
+            steps {
+                dir("${PKG_PATH}") {
+                    sh "buildpkg -r ${ADD_REPO}"
+                }
+            }
+            post {
+                success {
+                    dir("${PKG_PATH}") {
+                        sh "deploypkg -a -d ${ADD_REPO} -s"
+                    }
+                }
+            }
+        }
+        stage('Add') {
+            when {
+                expression { return  IS_ADD == 'true' }
+            }
+            steps {
+                dir("${PKG_TRUNK}") {
+                    sh "deploypkg -a -d ${ADD_REPO}"
+                }
+            }
+        }
+        stage('Remove') {
+            when {
+                expression { return  IS_REMOVE == 'true' }
+            }
+            steps {
+                dir("${PKG_TRUNK}") {
+                    sh "deploypkg -r -d ${RM_REPO}"
+                }
+            }
+        }
+    }
+}

data/Jenkinsfile.packages

@@ -0,0 +1,241 @@
+def ADD_REPO = ''
+def RM_REPO = ''
+def IS_ADD = 'false'
+def IS_REMOVE = 'false'
+def IS_BUILD = 'false'
+def PKG_TRUNK = ''
+def PKG_PATH = ''
+
+pipeline {
+    agent any
+    options {
+        skipDefaultCheckout()
+        timestamps()
+    }
+    stages {
+        stage('Checkout') {
+            steps {
+                script {
+                    checkout scm
+
+                    def currentCommit = sh(returnStdout: true, script: 'git rev-parse @').trim()
+                    echo "currentCommit: ${currentCommit}"
+
+                    def changedFilesStatus = sh(returnStdout: true, script: "git show --pretty=format: --name-status ${currentCommit}").tokenize('\n')
+                    def changedPkgStatus = []
+                    def pkgPath = []
+                    int entryCount = 0
+                    for ( int i = 0; i < changedFilesStatus.size(); i++ ) {
+                        def entry = changedFilesStatus[i].split()
+                        def fileStatus = entry[0]
+                        entryCount = entry.size()
+                        for ( int j = 1; j < entry.size(); j++ ) {
+                            if ( entry[j].contains('/PKGBUILD') && entry[j].contains('/repos') ){
+                                changedPkgStatus << "${fileStatus} " + entry[j].minus('/PKGBUILD')
+                                pkgPath << entry[j].minus('/PKGBUILD')
+                            }
+                        }
+                    }
+
+                    int pkgCount = changedPkgStatus.size()
+                    int pkgPathCount = pkgPath.size()
+                    echo "pkgCount: ${pkgCount}"
+                    echo "entryCount: ${entryCount}"
+                    echo "pkgPathCount: ${pkgPathCount}"
+                    echo "changedPkgStatus: ${changedPkgStatus}"
+
+                    if ( pkgCount > 0 ) {
+
+                        if ( entryCount == 2 && pkgCount == 2 ) {
+                            def pkgEntry1 = changedPkgStatus[0].split()
+                            def pkgEntry2 = changedPkgStatus[1].split()
+                            def srcPath = []
+                            def pkgStatus = []
+                            srcPath << pkgEntry1[1]
+                            srcPath << pkgEntry2[1]
+                            pkgStatus << pkgEntry1[0]
+                            pkgStatus << pkgEntry2[0]
+                            def buildInfo1 = srcPath[0].tokenize('/')
+                            def buildInfo2 = srcPath[1].tokenize('/')
+
+                            if ( pkgStatus[0] == 'M' ) {
+                                IS_ADD = 'true'
+                                if ( srcPath[0].contains('testing') ) {
+                                    ADD_REPO = 'gremlins'
+                                } else if ( srcPath[0].contains('core') ) {
+                                    ADD_REPO = 'system'
+                                } else if ( srcPath[0].contains('extra') ) {
+                                    ADD_REPO = 'world'
+                                }
+                            } else if ( pkgStatus[1] == 'M' ) {
+                                IS_ADD = 'true'
+                                if ( srcPath[1].contains('testing') ) {
+                                    ADD_REPO = 'gremlins'
+                                } else if ( srcPath[1].contains('core') ) {
+                                    ADD_REPO = ''
+                                } else if ( srcPath[1].contains('extra') ) {
+                                    ADD_REPO = 'world'
+                                }
+                            }
+
+                            if ( pkgStatus[0] == 'D' ) {
+                                IS_REMOVE = 'true'
+                                if ( srcPath[0].contains('testing') ) {
+                                    RM_REPO = 'gremlins'
+                                } else if ( srcPath[0].contains('core') ) {
+                                    RM_REPO = 'system'
+                                } else if ( srcPath[0].contains('extra') ) {
+                                    RM_REPO = 'world'
+                                }
+                            } else if ( pkgStatus[1] == 'D' ) {
+                                IS_REMOVE = 'true'
+                                if ( srcPath[1].contains('testing') ) {
+                                    RM_REPO = 'gremlins'
+                                } else if ( srcPath[1].contains('core') ) {
+                                    RM_REPO = 'system'
+                                } else if ( srcPath[1].contains('extra') ) {
+                                    RM_REPO = 'world'
+                                }
+                            }
+
+                            PKG_TRUNK = buildInfo1[0] + '/trunk'
+                        }
+
+                        if ( entryCount == 3 && pkgCount == 2 ) {
+                            def pkgEntry = changedPkgStatus[0].split()
+                            def pkgStatus = pkgEntry[0]
+                            def buildInfo1 = pkgPath[0].tokenize('/')
+                            def buildInfo2 = pkgPath[1].tokenize('/')
+
+                            if ( pkgStatus.contains('R') ) {
+                                IS_ADD = 'true'
+                                IS_REMOVE = 'true'
+
+                                if ( pkgPath[0].contains('staging') && pkgPath[1].contains('testing') ) {
+                                    ADD_REPO = 'gremlins'
+                                    RM_REPO = 'goblins'
+                                } else if ( pkgPath[0].contains('testing') && pkgPath[1].contains('staging') ) {
+                                    ADD_REPO = 'goblins'
+                                    RM_REPO = 'gremlins'
+                                }
+
+                                if ( pkgPath[0].contains('core') && pkgPath[1].contains('testing')) {
+                                    ADD_REPO = 'gremlins'
+                                    RM_REPO = 'system'
+                                } else if ( pkgPath[0].contains('testing') && pkgPath[1].contains('core')) {
+                                    ADD_REPO = 'system'
+                                    RM_REPO = 'gremlins'
+                                }
+
+                                if ( pkgPath[0].contains('extra') && pkgPath[1].contains('testing')) {
+                                    ADD_REPO = 'gremlins'
+                                    RM_REPO = 'world'
+                                } else if ( pkgPath[0].contains('testing') && pkgPath[1].contains('extra')) {
+                                    ADD_REPO = 'world'
+                                    RM_REPO = 'gremlins'
+                                }
+
+                                if ( pkgPath[0].contains('core') && pkgPath[1].contains('extra')) {
+                                    ADD_REPO = 'world'
+                                    RM_REPO = 'system'
+                                } else if ( pkgPath[0].contains('extra') && pkgPath[1].contains('core')) {
+                                    ADD_REPO = 'system'
+                                    RM_REPO = 'world'
+                                }
+                            }
+                            PKG_TRUNK = buildInfo1[0] + '/trunk'
+                        }
+
+                        if ( pkgCount == 1 ) {
+                            def pkgEntry = changedPkgStatus[0].split()
+                            def pkgStatus = pkgEntry[0]
+                            def srcPath = pkgEntry[1]
+                            def buildInfo = srcPath.tokenize('/')
+
+                            if ( srcPath.contains('staging') ) {
+                                if ( pkgStatus == 'A' || pkgStatus == 'M' ) {
+                                    IS_BUILD = 'true'
+                                }
+                                if ( pkgStatus == 'D' ) {
+                                    IS_REMOVE = 'true'
+                                }
+                                ADD_REPO = 'goblins'
+                                RM_REPO = ADD_REPO
+                            } else if ( srcPath.contains('testing') ) {
+                                if ( pkgStatus == 'A' || pkgStatus == 'M' ) {
+                                    IS_BUILD = 'true'
+                                }
+                                if ( pkgStatus == 'D' ) {
+                                    IS_REMOVE = 'true'
+                                }
+                                ADD_REPO = 'gremlins'
+                                RM_REPO = ADD_REPO
+                            } else if ( srcPath.contains('core') ) {
+                                if ( pkgStatus == 'A' || pkgStatus == 'M' ) {
+                                    IS_BUILD = 'true'
+                                }
+                                if ( pkgStatus == 'D' ) {
+                                    IS_REMOVE = 'true'
+                                }
+                                ADD_REPO = 'system'
+                                RM_REPO = ADD_REPO
+                            } else if ( srcPath.contains('extra') ) {
+                                if ( pkgStatus == 'A' || pkgStatus == 'M' ) {
+                                    IS_BUILD = 'true'
+                                }
+                                if ( pkgStatus == 'D' ) {
+                                    IS_REMOVE = 'true'
+                                }
+                                ADD_REPO = 'world'
+                                RM_REPO = ADD_REPO
+                            }
+                            PKG_PATH = srcPath
+                            PKG_TRUNK = buildInfo[0] + '/trunk'
+                        }
+
+                    }
+                }
+            }
+        }
+        stage('Build') {
+            environment {
+                BUILDBOT_GPGP = credentials('BUILDBOT_GPGP')
+            }
+            when {
+                expression { return  IS_BUILD == 'true' }
+            }
+            steps {
+                dir("${PKG_PATH}") {
+                    sh "buildpkg -r ${ADD_REPO}"
+                }
+            }
+            post {
+                success {
+                    dir("${PKG_PATH}") {
+                        sh "deploypkg -a -d ${ADD_REPO} -s"
+                    }
+                }
+            }
+        }
+        stage('Add') {
+            when {
+                expression { return  IS_ADD == 'true' }
+            }
+            steps {
+                dir("${PKG_TRUNK}") {
+                    sh "deploypkg -a -d ${ADD_REPO}"
+                }
+            }
+        }
+        stage('Remove') {
+            when {
+                expression { return  IS_REMOVE == 'true' }
+            }
+            steps {
+                dir("${PKG_TRUNK}") {
+                    sh "deploypkg -r -d ${RM_REPO}"
+                }
+            }
+        }
+    }
+}

data/artools.conf

@@ -2,9 +2,6 @@
 ################ artools-base ###############
 #############################################
 
-# default taget arch: auto detect
-# target_arch=$(uname -m)
-
 # build dir where buildpkg or buildiso chroots are created
 # chroots_dir=/var/lib/artools
 
@@ -15,14 +12,8 @@
 ################ artools-pkg ################
 #############################################
 
-# artix package tree
-# repo_tree_artix=('system' 'world' 'galaxy' 'lib32')
-
 # host_tree_artix='https://github.com/artix-linux'
 
-# archlinux package tree
-# repo_tree_arch=('packages' 'community')
-
 # host_tree_arch=git://projects.archlinux.org/svntogit
 
 # default repos root
@@ -32,6 +23,9 @@
 ################ artools-iso ################
 #############################################
 
+# the iso storage directory
+# iso_pool="${workspace_dir}/iso"
+
 # the dist release; default: auto
 # iso_version=$(date +%Y%m%d)
 
@@ -41,11 +35,14 @@
 # unset defaults to given value
 # kernel="linux-lts"
 
+# custom additional kernel args
+# kernel_args=""
+
 # gpg key; leave empty or commented to skip sfs signing
 # gpgkey=""
 
 # set upload bandwidth limit in kB/s
-# limit=100
+# uplimit=100
 
 # the torrent tracker urls, comma separated
 # tracker_url='udp://mirror.strits.dk:6969'

data/base/Packages-Live

@@ -6,4 +6,3 @@ artix-live-portable-efi
 virtualbox-guest-modules-artix
 virtualbox-guest-utils
 linux-lts-headers
-

data/base/Packages-Root

@@ -59,6 +59,7 @@ ntfs-3g
 >openrc nfs-utils-openrc
 >openrc rsync-openrc
 >openrc wpa_supplicant-openrc
+>openrc opentmpfiles
 os-prober
 pacman
 pciutils
@@ -77,7 +78,7 @@ texinfo
 usbutils
 util-linux
 which
->x86_64 efibootmgr
+efibootmgr
 xfsprogs
 zd1211-firmware
 zsh

data/base/profile.conf

@@ -8,19 +8,20 @@
 # autologin="true"
 
 # service runlevels
-# openrc_boot=('elogind')
-# openrc_default=('acpid' 'bluetooth' 'cronie' 'cupsd' 'dbus' 'syslog-ng' 'NetworkManager')
+# services=('acpid' 'bluetooth' 'cronie' 'cupsd' 'dbus' 'syslog-ng' 'NetworkManager')
 
-# unset defaults to given values
+# default values
 # addgroups="video,power,storage,optical,network,lp,scanner,wheel,users"
 
+# netgroups_url="https://raw.githubusercontent.com/artix-linux/netgroups/master"
+
 ################# live-session #################
 
-# unset defaults to given value
+# default value
 # hostname="artix"
 
-# unset defaults to given value
+# default value
 # username="artix"
 
-# unset defaults to given value
+# default value
 # password="artix"

data/import.list.d/galaxy.list

@@ -1,12 +0,0 @@
-autoconf-archive
-confuse
-libappindicator
-libdbusmenu
-libftdi
-libindicator
-libdbi
-libpgm
-libsodium
-zeromq
-jansson
-libnewt

data/import.list.d/lib32.list

@@ -1,3 +0,0 @@
-lib32-glibc
-gcc-multilib
-llvm

data/import.list.d/system.list

@@ -1,151 +0,0 @@
-tzdata
-iana-etc
-linux-api-headers
-binutils
-glibc
-gcc
-attr
-acl
-ncurses
-readline
-bash
-sed
-diffutils
-expat
-db
-lz4
-lzo
-bzip2
-gmp
-mpfr
-m4
-gdbm
-xz
-zlib
-file
-icu
-perl
-openssl
-openssl-1.0
-autoconf
-automake
-dash
-bison
-ldns
-less
-libaio
-libarchive
-libassuan
-libcap
-libedit
-libevent
-libffi
-libgcrypt
-libgpg-error
-libgssglue
-libidn
-libksba
-libmnl
-libmpc
-libnftnl
-libnghttp2
-libnl
-libpcap
-libpipeline
-libpsl
-librpcsecgss
-libseccomp
-libsecret
-libssh2
-libtasn1
-libtirpc
-libtool
-libunistring
-pcre
-glib2
-grep
-gzip
-bridge-utils
-ca-certificates
-ca-certificates-cacert
-coreutils
-cracklib
-dialog
-ding-libs
-dnssec-anchors
-dosfstools
-e2fsprogs
-ed
-efibootmgr
-efivar
-elfutils
-fakeroot
-findutils
-flex
-gawk
-gettext
-gnutls
-gpgme
-groff
-hdparm
-hwids
-ifenslave
-iproute2
-iputils
-iw
-jfsutils
-kbd
-keyutils
-licenses
-links
-linux-atm
-linux-firmware
-make
-man-pages
-mkinitcpio-busybox
-mkinitcpio-nfs-utils
-nano
-nettle
-net-tools
-nfsidmap
-nilfs-utils
-npth
-nspr
-nss
-p11-kit
-patch
-pciutils
-pinentry
-pkcs11-helper
-pkg-config
-popt
-pptpclient
-procinfo-ng
-psmisc
-pth
-reiserfsprogs
-run-parts
-sdparm
-s-nail
-sqlite
-sysfsutils
-syslinux
-tar
-texinfo
-thin-provisioning-tools
-traceroute
-usbutils
-vi
-which
-wireless-regdb
-wireless_tools
-wpa_actiond
-xfsprogs
-zd1211-firmware
-archlinux-keyring
-b43-fwcutter
-ipw2100-fw
-ipw2200-fw
-isdn4k-utils
-curl
-sudo

data/import.list.d/world.list

@@ -1,232 +0,0 @@
-libasyncns
-libblockdev
-libbytesize
-libcap-ng
-libcroco
-libdaemon
-libdatrie
-libdrm
-libepoxy
-libexif
-libfontenc
-libglvnd
-libgphoto2
-libical
-libice
-libieee1284
-libimobiledevice
-libiscsi
-libjpeg-turbo
-libomxil-bellagio
-libpaper
-libpciaccess
-libplist
-libpng
-libproxy
-librsvg
-libsm
-libthai
-libtiff
-libtxc_dxtn
-libunwind
-libusb-compat
-libusbmuxd
-libwebp
-libx11
-libxau
-libxaw
-libxcb
-libxcomposite
-libxcursor
-libxdamage
-libxdmcp
-libxext
-libxfixes
-libxfont
-libxfont2
-libxft
-libxi
-libxinerama
-libxkbcommon
-libxkbfile
-libxml2
-libxmu
-libxpm
-libxrandr
-libxrender
-libxshmfence
-libxslt
-libxt
-libxtst
-libxxf86vm
-libgusb
-liblouis
-libraqm
-liblqr
-libuv
-libqmi
-glib-networking
-gsettings-desktop-schemas
-slang
-dhcp
-dbus-python
-lirc
-qt5-3d
-qt5-canvas3d
-qt5-charts
-qt5-connectivity
-qt5-datavis3d
-qt5-declarative
-qt5-doc
-qt5-examples
-qt5-gamepad
-qt5-graphicaleffects
-qt5-imageformats
-qt5-location
-qt5-multimedia
-qt5-networkauth
-qt5-quickcontrols
-qt5-quickcontrols2
-qt5-remoteobjects
-qt5-script
-qt5-scxml
-qt5-sensors
-qt5-serialbus
-qt5-serialport
-qt5-speech
-qt5-svg
-qt5-tools
-qt5-translations
-qt5-virtualkeyboard
-qt5-wayland
-qt5-webchannel
-qt5-webengine
-qt5-webkit
-qt5-websockets
-qt5-webview
-qt5-x11extras
-qt5-xmlpatterns
-adwaita-icon-theme
-alsa-lib
-apr
-apr-util
-atk
-at-spi2-atk
-at-spi2-core
-boost
-cairo
-cantarell-fonts
-check
-compositeproto
-damageproto
-dbus-glib
-dconf
-desktop-file-utils
-docbook-dsssl
-docbook-sgml31
-docbook-utils
-docbook-xml
-docbook-xsl
-double-conversion
-doxygen
-eventlog
-fixesproto
-fontconfig
-fontsproto
-freetype2
-gd
-gdk-pixbuf2
-ghostscript
-giflib
-gnome-common
-gobject-introspection
-gptfdisk
-graphite
-graphviz
-gsfonts
-gtk3
-gtk-doc
-gts
-harfbuzz
-hicolor-icon-theme
-ijs
-inputproto
-intltool
-itstool
-jasper
-jbig2dec
-json-glib
-kbproto
-lcms2
-mesa
-mtdev
-net-snmp
-openjade
-opensp
-pango
-parted
-pcre2
-perl-error
-perl-xml-parser
-perl-yaml
-pixman
-python2
-python
-python-appdirs
-python-beaker
-python-mako
-python-markupsafe
-python-packaging
-python-pyparsing
-python-setuptools
-python-six
-randrproto
-recordproto
-renderproto
-serf
-sgml-common
-shared-mime-info
-source-highlight
-speexdsp
-tslib
-v4l-utils
-vala
-valgrind
-volume_key
-vte3
-vte
-wayland
-wayland-protocols
-xcb-proto
-xcb-util
-xcb-util-image
-xcb-util-keysyms
-xcb-util-renderutil
-xcb-util-wm
-xextproto
-xf86vidmodeproto
-xineramaproto
-xkeyboard-config
-xorg-bdftopcf
-xorg-fonts-alias
-xorg-fonts-encodings
-xorg-fonts-misc
-xorg-font-util
-xorg-font-utils
-xorg-mkfontdir
-xorg-mkfontscale
-xorg-setxkbmap
-xorg-xkbcomp
-xproto
-yelp-tools
-yelp-xsl
-cmake
-jemalloc
-jsoncpp
-fribidi
-js
-imagemagick
-poppler
-bc
-xdg-utils
-xf86-input-libinput

data/linux.preset

@@ -1,14 +0,0 @@
-# mkinitcpio preset file for the 'linux' package
-
-ALL_config="/etc/mkinitcpio.conf"
-ALL_kver="/boot/vmlinuz-@kernel@-@arch@"
-
-PRESETS=('default' 'fallback')
-
-#default_config="/etc/mkinitcpio.conf"
-default_image="/boot/initramfs-@kernel@-@arch@.img"
-#default_options=""
-
-#fallback_config="/etc/mkinitcpio.conf"
-fallback_image="/boot/initramfs-@kernel@-@arch@-fallback.img"
-fallback_options="-S autodetect"

data/makepkg-i686.conf

@@ -1,147 +0,0 @@
-#
-# /etc/makepkg.conf
-#
-
-#########################################################################
-# SOURCE ACQUISITION
-#########################################################################
-#
-#-- The download utilities that makepkg should use to acquire sources
-#  Format: 'protocol::agent'
-DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
-          'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
-          'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
-          'rsync::/usr/bin/rsync --no-motd -z %u %o'
-          'scp::/usr/bin/scp -C %u %o')
-
-# Other common tools:
-# /usr/bin/snarf
-# /usr/bin/lftpget -c
-# /usr/bin/wget
-
-#-- The package required by makepkg to download VCS sources
-#  Format: 'protocol::package'
-VCSCLIENTS=('bzr::bzr'
-            'git::git'
-            'hg::mercurial'
-            'svn::subversion')
-
-#########################################################################
-# ARCHITECTURE, COMPILE FLAGS
-#########################################################################
-#
-CARCH="i686"
-CHOST="i686-pc-linux-gnu"
-
-#-- Compiler and Linker Flags
-# -march (or -mcpu) builds exclusively for an architecture
-# -mtune optimizes for an architecture, but builds for whole processor family
-CPPFLAGS="-D_FORTIFY_SOURCE=2"
-CFLAGS="-march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"
-CXXFLAGS="-march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"
-LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
-#-- Make Flags: change this for DistCC/SMP systems
-#MAKEFLAGS="-j2"
-#-- Debugging flags
-DEBUG_CFLAGS="-g -fvar-tracking-assignments"
-DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
-
-#########################################################################
-# BUILD ENVIRONMENT
-#########################################################################
-#
-# Defaults: BUILDENV=(!distcc color !ccache check !sign)
-#  A negated environment option will do the opposite of the comments below.
-#
-#-- distcc:   Use the Distributed C/C++/ObjC compiler
-#-- color:    Colorize output messages
-#-- ccache:   Use ccache to cache compilation
-#-- check:    Run the check() function if present in the PKGBUILD
-#-- sign:     Generate PGP signature file
-#
-BUILDENV=(!distcc color !ccache check !sign)
-#
-#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
-#-- specify a space-delimited list of hosts running in the DistCC cluster.
-#DISTCC_HOSTS=""
-#
-#-- Specify a directory for package building.
-#BUILDDIR=/tmp/makepkg
-
-#########################################################################
-# GLOBAL PACKAGE OPTIONS
-#   These are default values for the options=() settings
-#########################################################################
-#
-# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !optipng !upx !debug)
-#  A negated option will do the opposite of the comments below.
-#
-#-- strip:      Strip symbols from binaries/libraries
-#-- docs:       Save doc directories specified by DOC_DIRS
-#-- libtool:    Leave libtool (.la) files in packages
-#-- staticlibs: Leave static library (.a) files in packages
-#-- emptydirs:  Leave empty directories in packages
-#-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
-#-- purge:      Remove files specified by PURGE_TARGETS
-#-- upx:        Compress binary executable files using UPX
-#-- optipng:    Optimize PNG images with optipng
-#-- debug:      Add debugging flags as specified in DEBUG_* variables
-#
-OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !optipng !upx !debug)
-
-#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
-INTEGRITY_CHECK=(md5)
-#-- Options to be used when stripping binaries. See `man strip' for details.
-STRIP_BINARIES="--strip-all"
-#-- Options to be used when stripping shared libraries. See `man strip' for details.
-STRIP_SHARED="--strip-unneeded"
-#-- Options to be used when stripping static libraries. See `man strip' for details.
-STRIP_STATIC="--strip-debug"
-#-- Manual (man and info) directories to compress (if zipman is specified)
-MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
-#-- Doc directories to remove (if !docs is specified)
-DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
-#-- Files to be removed from all packages (if purge is specified)
-PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
-
-#########################################################################
-# PACKAGE OUTPUT
-#########################################################################
-#
-# Default: put built package and cached source in build directory
-#
-#-- Destination: specify a fixed directory where all packages will be placed
-#PKGDEST=/home/packages
-#-- Source cache: specify a fixed directory where source files will be cached
-#SRCDEST=/home/sources
-#-- Source packages: specify a fixed directory where all src packages will be placed
-#SRCPKGDEST=/home/srcpackages
-#-- Log files: specify a fixed directory where all log files will be placed
-#LOGDEST=/home/makepkglogs
-#-- Packager: name/email of the person or organization building packages
-#PACKAGER="John Doe <john@doe.com>"
-#-- Specify a key to use for package signing
-#GPGKEY=""
-
-#########################################################################
-# COMPRESSION DEFAULTS
-#########################################################################
-#
-COMPRESSGZ=(gzip -c -f -n)
-COMPRESSBZ2=(bzip2 -c -f)
-COMPRESSXZ=(xz -c -z -)
-COMPRESSLRZ=(lrzip -q)
-COMPRESSLZO=(lzop -q)
-COMPRESSZ=(compress -c -f)
-
-#########################################################################
-# EXTENSION DEFAULTS
-#########################################################################
-#
-# WARNING: Do NOT modify these variables unless you know what you are
-#          doing.
-#
-PKGEXT='.pkg.tar.xz'
-SRCEXT='.src.tar.gz'
-
-# vim: set ft=sh ts=2 sw=2 et:

data/missing

@@ -0,0 +1,25 @@
+extra/speexdsp
+extra/spandsp
+extra/soundtouch
+extra/sbc
+extra/neon
+extra/mjpegtools
+extra/libmp4v2
+extra/js
+extra/gst-plugins-bad
+extra/faac
+extra/enchant
+extra/chromaprint
+extra/python-appdirs
+extra/python-beaker
+extra/python-mako
+extra/python-markupsafe
+extra/python-packaging
+extra/python-pyparsing
+extra/ttf-liberation
+extra/appstream-glib
+extra/libxkbui
+extra/libxkbfile
+extra/libunicodenames
+extra/mpg123
+extra/opencl-headers

data/pacman-default.conf

@@ -34,7 +34,7 @@ Architecture = auto
 #Color
 #TotalDownload
 CheckSpace
-#VerbosePkgLists
+VerbosePkgLists
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -73,11 +73,9 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# An example of a custom package repository.  See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
+#
+# ARCHLINUX
+#
 
 [extra]
 Include = /etc/pacman.d/mirrorlist-arch

data/pacman-goblins.conf

@@ -34,7 +34,7 @@ Architecture = auto
 #Color
 #TotalDownload
 CheckSpace
-#VerbosePkgLists
+VerbosePkgLists
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -64,29 +64,33 @@ LocalFileSigLevel = Optional
 # The header [repo-name] is crucial - it must be present and
 # uncommented to enable the repo.
 
-[system-testing]
+[goblins]
+Include = /etc/pacman.d/mirrorlist
+
+[gremlins]
 Include = /etc/pacman.d/mirrorlist
 
 [system]
 Include = /etc/pacman.d/mirrorlist
 
-[world-testing]
-Include = /etc/pacman.d/mirrorlist
-
 [world]
 Include = /etc/pacman.d/mirrorlist
 
-[galaxy-testing]
+[galaxy-goblins]
+Include = /etc/pacman.d/mirrorlist
+
+[galaxy-gremlins]
 Include = /etc/pacman.d/mirrorlist
 
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# An example of a custom package repository.  See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
+#
+# ARCHLINUX
+#
+
+[staging]
+Include = /etc/pacman.d/mirrorlist-arch
 
 [testing]
 Include = /etc/pacman.d/mirrorlist-arch
@@ -94,6 +98,9 @@ Include = /etc/pacman.d/mirrorlist-arch
 [extra]
 Include = /etc/pacman.d/mirrorlist-arch
 
+[community-staging]
+Include = /etc/pacman.d/mirrorlist-arch
+
 [community-testing]
 Include = /etc/pacman.d/mirrorlist-arch
 

data/pacman-gremlins.conf

@@ -0,0 +1,96 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta    = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+CheckSpace
+VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Artix Linux
+# packagers with `pacman-key --populate archlinux cromnix`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+
+[gremlins]
+Include = /etc/pacman.d/mirrorlist
+
+[system]
+Include = /etc/pacman.d/mirrorlist
+
+[world]
+Include = /etc/pacman.d/mirrorlist
+
+[galaxy-gremlins]
+Include = /etc/pacman.d/mirrorlist
+
+[galaxy]
+Include = /etc/pacman.d/mirrorlist
+
+#
+# ARCHLINUX
+#
+
+[testing]
+Include = /etc/pacman.d/mirrorlist-arch
+
+[extra]
+Include = /etc/pacman.d/mirrorlist-arch
+
+[community-testing]
+Include = /etc/pacman.d/mirrorlist-arch
+
+[community]
+Include = /etc/pacman.d/mirrorlist-arch

data/pacman-lib32-goblins.conf

@@ -34,7 +34,7 @@ Architecture = auto
 #Color
 #TotalDownload
 CheckSpace
-#VerbosePkgLists
+VerbosePkgLists
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -64,38 +64,42 @@ LocalFileSigLevel = Optional
 # The header [repo-name] is crucial - it must be present and
 # uncommented to enable the repo.
 
-[system-testing]
+[goblins]
+Include = /etc/pacman.d/mirrorlist
+
+[gremlins]
 Include = /etc/pacman.d/mirrorlist
 
 [system]
 Include = /etc/pacman.d/mirrorlist
 
-[world-testing]
-Include = /etc/pacman.d/mirrorlist
-
 [world]
 Include = /etc/pacman.d/mirrorlist
 
-[galaxy-testing]
+[galaxy-goblins]
+Include = /etc/pacman.d/mirrorlist
+
+[galaxy-gremlins]
 Include = /etc/pacman.d/mirrorlist
 
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
+[lib32-goblins]
+Include = /etc/pacman.d/mirrorlist
 
-[lib32-testing]
+[lib32-gremlins]
 Include = /etc/pacman.d/mirrorlist
 
 [lib32]
 Include = /etc/pacman.d/mirrorlist
 
-# An example of a custom package repository.  See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
+# 
+# ARCHLINUX
+#
+
+[staging]
+Include = /etc/pacman.d/mirrorlist-arch
 
 [testing]
 Include = /etc/pacman.d/mirrorlist-arch
@@ -103,12 +107,18 @@ Include = /etc/pacman.d/mirrorlist-arch
 [extra]
 Include = /etc/pacman.d/mirrorlist-arch
 
+[community-staging]
+Include = /etc/pacman.d/mirrorlist-arch
+
 [community-testing]
 Include = /etc/pacman.d/mirrorlist-arch
 
 [community]
 Include = /etc/pacman.d/mirrorlist-arch
 
+[multilib-staging]
+Include = /etc/pacman.d/mirrorlist-arch
+
 [multilib-testing]
 Include = /etc/pacman.d/mirrorlist-arch
 

data/pacman-lib32-gremlins.conf

@@ -0,0 +1,108 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta    = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+CheckSpace
+VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Artix Linux
+# packagers with `pacman-key --populate archlinux cromnix`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+
+[gremlins]
+Include = /etc/pacman.d/mirrorlist
+
+[system]
+Include = /etc/pacman.d/mirrorlist
+
+[world]
+Include = /etc/pacman.d/mirrorlist
+
+[galaxy-gremlins]
+Include = /etc/pacman.d/mirrorlist
+
+[galaxy]
+Include = /etc/pacman.d/mirrorlist
+
+[lib32-gremlins]
+Include = /etc/pacman.d/mirrorlist
+
+[lib32]
+Include = /etc/pacman.d/mirrorlist
+
+# 
+# ARCHLINUX
+#
+
+[testing]
+Include = /etc/pacman.d/mirrorlist-arch
+
+[extra]
+Include = /etc/pacman.d/mirrorlist-arch
+
+[community-testing]
+Include = /etc/pacman.d/mirrorlist-arch
+
+[community]
+Include = /etc/pacman.d/mirrorlist-arch
+
+[multilib-testing]
+Include = /etc/pacman.d/mirrorlist-arch
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist-arch

data/pacman-lib32.conf

@@ -34,7 +34,7 @@ Architecture = auto
 #Color
 #TotalDownload
 CheckSpace
-#VerbosePkgLists
+VerbosePkgLists
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -73,17 +73,12 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
 [lib32]
 Include = /etc/pacman.d/mirrorlist
 
-# An example of a custom package repository.  See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
+# 
+# ARCHLINUX
+#
 
 [extra]
 Include = /etc/pacman.d/mirrorlist-arch

data/patches/artix-bash.patch

@@ -1,5 +1,5 @@
 --- /dev/null
-+++ b/bash/artix.bashrc
++++ b/artix.bashrc
 @@ -0,0 +1,46 @@
 +use_color=true
 +
@@ -47,3 +47,41 @@
 +fi
 +
 +unset use_color safe_term match_lhs sh
+--- a/dot.bashrc
++++ b/dot.bashrc
+@@ -5,5 +5,5 @@
+ # If not running interactively, don't do anything
+ [[ $- != *i* ]] && return
+
+-alias ls='ls --color=auto'
+-PS1='[\u@\h \W]\$ '
++# alias ls='ls --color=auto'
++# PS1='[\u@\h \W]\$ '
+
+--- a/system.bashrc
++++ a/system.bashrc
+@@ -1,5 +1,5 @@
+ #
+-# /etc/bash.bashrc
++# /etc/bash/bashrc
+ #
+
+ # If not running interactively, don't do anything
+@@ -19,4 +19,8 @@
+     ;;
+ esac
+
++for sh in /etc/bash/bashrc.d/*.bashrc ; do
++	[[ -r ${sh} ]] && source "${sh}"
++done
++
+ [ -r /usr/share/bash-completion/bash_completion   ] && . /usr/share/bash-completion/bash_completion
+
+--- a/system.bash_logout
++++ a/system.bash_logout
+@@ -1,3 +1,3 @@
+ #
+-# /etc/bash.bash_logout
++# /etc/bash/bash_logout
+ #
+

data/patches/dot-bashrc.patch

@@ -1,11 +0,0 @@
---- a/bash/dot.bashrc
-+++ b/bash/dot.bashrc
-@@ -5,5 +5,5 @@
- # If not running interactively, don't do anything
- [[ $- != *i* ]] && return
-
--alias ls='ls --color=auto'
--PS1='[\u@\h \W]\$ '
-+# alias ls='ls --color=auto'
-+# PS1='[\u@\h \W]\$ '
-

data/patches/system-bashrc.patch

@@ -1,19 +0,0 @@
---- a/bash/system.bashrc
-+++ a/bash/system.bashrc
-@@ -1,5 +1,5 @@
- #
--# /etc/bash.bashrc
-+# /etc/bash/bashrc
- #
-
- # If not running interactively, don't do anything
-@@ -19,4 +19,8 @@
-     ;;
- esac
-
-+for sh in /etc/bash/bashrc.d/*.bashrc ; do
-+	[[ -r ${sh} ]] && source "${sh}"
-+done
-+
- [ -r /usr/share/bash-completion/bash_completion   ] && . /usr/share/bash-completion/bash_completion
-

data/patches/system-bashrc_logout.patch

@@ -1,8 +0,0 @@
---- a/bash/system.bash_logout
-+++ a/bash/system.bash_logout
-@@ -1,3 +1,3 @@
- #
--# /etc/bash.bash_logout
-+# /etc/bash/bash_logout
- #
-

data/qt5.list

@@ -0,0 +1,38 @@
+qt5-base
+qt5-xmlpatterns
+qt5-x11extras
+qt5-script
+qt5-svg
+qt5-serialport
+qt5-serialbus
+qt5-networkauth
+qt5-imageformats
+qt5-declarative
+qt5-wayland
+qt5-sensors
+qt5-scxml
+qt5-connectivity
+qt5-graphicaleffects
+qt5-gamepad
+qt5-3d
+qt5-canvas3d
+qt5-datavis3d
+qt5-charts
+qt5-virtualkeyboard
+qt5-location
+qt5-multimedia
+qt5-speech
+qt5-quickcontrols
+qt5-quickcontrols2
+qt5-remoteobjects
+qt5-webchannel
+qt5-websockets
+qt5-webglplugin
+qt5-tools
+qt5-translations
+qt5-doc
+qt5-examples
+qt5-webengine
+qt5-webview
+qt5-webkit
+pyqt5

initcpio/hooks/artix

@@ -102,7 +102,7 @@ _mnt_dev() {
 _verify_checksum() {
     local _status
     cd "/run/artix/bootmnt/${artixbasedir}/${arch}"
-    md5sum -c $1.md5 > /tmp/checksum.log 2>&1
+    sha512sum -c $1.sha512 > /tmp/checksum.log 2>&1
     _status=$?
     cd "${OLDPWD}"
     return ${_status}
@@ -160,7 +160,7 @@ artix_mount_handler() {
     if [[ "${checksum}" == "y" ]]; then
         for fs in rootfs desktopfs livefs;do
             if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sfs" ]]; then
-                if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.md5" ]]; then
+                if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sha512" ]]; then
                     msg -n ":: Self-test requested, please wait..."
                     if _verify_checksum "${fs}"; then
                         msg "done. Checksum is OK, continue booting."
@@ -170,7 +170,7 @@ artix_mount_handler() {
                         launch_interactive_shell
                     fi
                 else
-                    echo "ERROR: checksum=y option specified but ${artixbasedir}/${arch}/${fs}.md5 not found"
+                    echo "ERROR: checksum=y option specified but ${artixbasedir}/${arch}/${fs}.sha512 not found"
                     launch_interactive_shell
                 fi
             fi

lib/util-chroot.sh

@@ -53,9 +53,8 @@ default_locale(){
         if [[ ! -f "$mnt/etc/locale.gen.bak" ]];then
             info "Setting locale ..."
             mv "$mnt/etc/locale.gen" "$mnt/etc/locale.gen.bak"
-            printf '%s.UTF-8 UTF-8\n' en_US > "$mnt/etc/locale.gen"
-            printf 'LANG=%s.UTF-8\n' en_US > "$mnt/etc/locale.conf"
-            printf 'LC_MESSAGES=C\n' >> "$mnt/etc/locale.conf"
+            printf '%s.UTF-8 UTF-8\n' en_US de_DE > "$mnt/etc/locale.gen"
+            echo 'LANG=en_US.UTF-8.UTF-8' > "$mnt/etc/locale.conf"
         fi
     elif [[ $action == "reset" ]];then
         if [[ -f "$mnt/etc/locale.gen.bak" ]];then

lib/util-fstab.sh

@@ -13,6 +13,7 @@ declare -A pseudofs_types=([anon_inodefs]=1
                         [bdev]=1
                         [binfmt_misc]=1
                         [cgroup]=1
+                        [cgroup2]=1
                         [configfs]=1
                         [cpuset]=1
                         [debugfs]=1
@@ -72,7 +73,7 @@ valid_number_of_base() {
 mangle() {
     local i= chr= out=
 
-    unset {a..f} {A..F}
+    local {a..f}= {A..F}=
 
     for (( i = 0; i < ${#1}; i++ )); do
         chr=${1:i:1}
@@ -91,7 +92,7 @@ mangle() {
 unmangle() {
     local i= chr= out= len=$(( ${#1} - 4 ))
 
-    unset {a..f} {A..F}
+    local {a..f}= {A..F}=
 
     for (( i = 0; i < len; i++ )); do
         chr=${1:i:1}

lib/util-iso-chroot.sh

@@ -1,118 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-add_svc_rc(){
-    local mnt="$1" name="$2" rlvl="$3"
-    if [[ -f $mnt/etc/init.d/$name ]];then
-        msg2 "Setting %s ..." "$name"
-        chroot $mnt rc-update add $name $rlvl &>/dev/null
-    fi
-}
-
-set_xdm(){
-    if [[ -f $1/etc/conf.d/xdm ]];then
-        local conf='DISPLAYMANAGER="'${displaymanager}'"'
-        sed -i -e "s|^.*DISPLAYMANAGER=.*|${conf}|" $1/etc/conf.d/xdm
-    fi
-}
-
-configure_hosts(){
-    sed -e "s|localhost.localdomain|localhost.localdomain ${hostname}|" -i $1/etc/hosts
-}
-
-configure_logind(){
-    local conf=$1/etc/$2/logind.conf
-    if [[ -e $conf ]];then
-        msg2 "Configuring logind ..."
-        sed -i 's/#\(HandleSuspendKey=\)suspend/\1ignore/' "$conf"
-        sed -i 's/#\(HandleLidSwitch=\)suspend/\1ignore/' "$conf"
-        sed -i 's/#\(HandleHibernateKey=\)hibernate/\1ignore/' "$conf"
-    fi
-}
-
-configure_services(){
-    local mnt="$1"
-    info "Configuring [%s]" "${initsys}"
-    case ${initsys} in
-        'openrc')
-            for svc in ${openrc_boot[@]}; do
-                add_svc_rc "$mnt" "$svc" "boot"
-            done
-            for svc in ${openrc_default[@]}; do
-                [[ $svc == "xdm" ]] && set_xdm "$mnt"
-                add_svc_rc "$mnt" "$svc" "default"
-            done
-            for svc in ${enable_live[@]}; do
-                add_svc_rc "$mnt" "$svc" "default"
-            done
-        ;;
-    esac
-    info "Done configuring [%s]" "${initsys}"
-}
-
-configure_system(){
-    local mnt="$1"
-    case ${initsys} in
-        'openrc')
-            configure_logind "$mnt" "elogind"
-        ;;
-    esac
-    echo ${hostname} > $mnt/etc/hostname
-}
-
-clean_iso_root(){
-    local dest="$1"
-    msg "Deleting isoroot [%s] ..." "${dest##*/}"
-    rm -rf --one-file-system "$dest"
-}
-
-clean_up_image(){
-    local path mnt="$1"
-    msg2 "Cleaning [%s]" "${mnt##*/}"
-
-    default_locale "reset" "$mnt"
-    path=$mnt/boot
-    if [[ -d "$path" ]]; then
-        find "$path" -name 'initramfs*.img' -delete &> /dev/null
-    fi
-    path=$mnt/var/lib/pacman/sync
-    if [[ -d $path ]];then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/cache/pacman/pkg
-    if [[ -d $path ]]; then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/log
-    if [[ -d $path ]]; then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/tmp
-    if [[ -d $path ]];then
-        find "$path" -mindepth 1 -delete &> /dev/null
-    fi
-    path=$mnt/tmp
-    if [[ -d $path ]];then
-        find "$path" -mindepth 1 -delete &> /dev/null
-    fi
-
-    if [[ ${mnt##*/} == 'livefs' ]];then
-        rm -rf "$mnt/etc/pacman.d/gnupg"
-    fi
-
-    find "$mnt" -name *.pacnew -name *.pacsave -name *.pacorig -delete
-    if [[ -f "$mnt/boot/grub/grub.cfg" ]]; then
-        rm $mnt/boot/grub/grub.cfg
-    fi
-    if [[ -f "$mnt/etc/machine-id" ]]; then
-        rm $mnt/etc/machine-id
-    fi
-}

lib/util-iso-grub.sh

@@ -46,6 +46,16 @@ prepare_boot_extras(){
     cp $src/usr/share/licenses/common/GPL2/license.txt $dest/memtest.COPYING
 }
 
+configure_grub(){
+    local conf="$1"
+
+    sed -e "s|@arch@|${target_arch}|g" \
+        -e "s|@iso_label@|${iso_label}|" \
+        -e "s|@iso_name@|${iso_name}|g" \
+        -e "s|@kernel_args@|${kernel_args}|g" \
+        -i $conf
+}
+
 prepare_grub(){
     local platform=i386-pc img='core.img' grub=$3/boot/grub efi=$3/efi/boot \
         lib=$1/usr/lib/grub prefix=/boot/grub theme=$2/usr/share/grub data=$1/usr/share/grub

lib/util-iso-mount.sh

@@ -1,65 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-track_img() {
-    info "mount: [%s]" "$2"
-    mount "$@" && IMG_ACTIVE_MOUNTS=("$2" "${IMG_ACTIVE_MOUNTS[@]}")
-}
-
-mount_img() {
-    IMG_ACTIVE_MOUNTS=()
-    mkdir -p "$2"
-    track_img "$1" "$2"
-}
-
-umount_img() {
-    if [[ -n ${IMG_ACTIVE_MOUNTS[@]} ]];then
-        info "umount: [%s]" "${IMG_ACTIVE_MOUNTS[@]}"
-        umount "${IMG_ACTIVE_MOUNTS[@]}"
-        unset IMG_ACTIVE_MOUNTS
-        rm -r "$1"
-    fi
-}
-
-track_fs() {
-    info "overlayfs mount: [%s]" "$5"
-    mount "$@" && FS_ACTIVE_MOUNTS=("$5" "${FS_ACTIVE_MOUNTS[@]}")
-}
-
-mount_overlay(){
-    FS_ACTIVE_MOUNTS=()
-    local lower= upper="$1" work="$2" pkglist="$3"
-    local fs=${upper##*/}
-    local rootfs="$work/rootfs" desktopfs="$work/desktopfs" livefs="$work/livefs"
-    mkdir -p "${mnt_dir}/work"
-    mkdir -p "$upper"
-    case $fs in
-        desktopfs) lower="$rootfs" ;;
-        livefs)
-            lower="$rootfs"
-            [[ -f $pkglist ]] && lower="$desktopfs":"$rootfs"
-        ;;
-        bootfs)
-            lower="$livefs":"$rootfs"
-            [[ -f $pkglist ]] && lower="$livefs":"$desktopfs":"$rootfs"
-        ;;
-    esac
-    track_fs -t overlay overlay -olowerdir="$lower",upperdir="$upper",workdir="${mnt_dir}/work" "$upper"
-}
-
-umount_overlay(){
-    if [[ -n ${FS_ACTIVE_MOUNTS[@]} ]];then
-        info "overlayfs umount: [%s]" "${FS_ACTIVE_MOUNTS[@]}"
-        umount "${FS_ACTIVE_MOUNTS[@]}"
-        unset FS_ACTIVE_MOUNTS
-        rm -rf "${mnt_dir}/work"
-    fi
-}

lib/util-iso-profile.sh

@@ -44,22 +44,20 @@ load_profile(){
     [[ -z ${password} ]] && password="artix"
 
     if [[ -z ${addgroups} ]];then
-        addgroups="video,power,storage,optical,network,lp,scanner,wheel,users"
+        addgroups="video,power,storage,optical,network,lp,scanner,wheel,users,audio"
     fi
 
-    if [[ -z ${openrc_boot[@]} ]];then
-        openrc_boot=('elogind')
+    if [[ -z ${services[@]} ]];then
+        services=('acpid' 'bluetooth' 'cronie' 'cupsd' 'dbus' 'syslog-ng' 'NetworkManager')
     fi
 
-    if [[ -z ${openrc_default[@]} ]];then
-        openrc_default=('acpid' 'bluetooth' 'cronie' 'cupsd' 'dbus' 'syslog-ng' 'NetworkManager')
+    [[ ${displaymanager} != "none" ]] && services+=('xdm')
+    
+    if [[ -z ${services_live[@]} ]];then
+        services_live=('artix-live' 'pacman-init')
     fi
-
-    [[ ${displaymanager} != "none" ]] && openrc_default+=('xdm')
-
-    enable_live=('artix-live' 'pacman-init')
-
-    [[ -z ${netgroups} ]] && netgroups="https://raw.githubusercontent.com/artix-linux/netgroups/master"
+    
+    [[ -z ${netgroups_url} ]] && netgroups_url="https://raw.githubusercontent.com/artix-linux/netgroups/master"
 
     return 0
 }
@@ -84,9 +82,8 @@ write_live_session_conf(){
     echo "addgroups='${addgroups}'" >> ${conf}
 }
 
-# $1: file name
 load_pkgs(){
-    local pkglist="$1" arch="$2" init="$3" _kv="$4"
+    local pkglist="$1" init="$2" _kv="$3"
     info "Loading Packages: [%s] ..." "${pkglist##*/}"
 
     local _init="s|>$init||g"
@@ -96,13 +93,6 @@ load_pkgs(){
         'runit') _init_rm1="s|>s6.*||g"; _init_rm2="s|>openrc.*||g" ;;
     esac
 
-    local _arch="s|>x86_64||g" _arch_rm="s|>i686.*||g"
-
-    if [[ "$arch" == 'i686' ]];then
-        _arch="s|>i686||g"
-        _arch_rm="s|>x86_64.*||g"
-    fi
-
     local _blacklist="s|>blacklist.*||g" \
         _kernel="s|KERNEL|$_kv|g" \
         _space="s| ||g" \
@@ -116,8 +106,6 @@ load_pkgs(){
             | sed "$_init" \
             | sed "$_init_rm1" \
             | sed "$_init_rm2" \
-            | sed "$_arch" \
-            | sed "$_arch_rm" \
             | sed "$_kernel" \
             | sed "$_clean"))
 }

lib/util-iso-publish.sh

@@ -17,7 +17,7 @@ connect(){
 gen_webseed(){
     local webseed seed="$1"
     for mirror in ${host_mirrors[@]};do
-        webseed=${webseed:-}${webseed:+,}"http://${mirror}.dl.${seed}"
+        webseed=${webseed:-}${webseed:+,}"https://${mirror}.dl.${seed}"
     done
     echo ${webseed}
 }
@@ -27,9 +27,10 @@ make_torrent(){
 
     if [[ -n $(find ${src_dir} -type f -name "*.iso") ]]; then
         for iso in $(ls ${src_dir}/*.iso);do
-            local seed=${file_host}/project/${project}/${target_dir}/${iso##*/}
+            local seed=${file_host}/project/${project}${target_dir}${iso##*/}
             local mktorrent_args=(-c "${torrent_meta}" -p -l ${piece_size} -a ${tracker_url} -w $(gen_webseed ${seed}))
             ${verbose} && mktorrent_args+=(-v)
+            info "mktorrent_args: %s" "${mktorrent_args[@]}"
             msg2 "Creating (%s) ..." "${iso##*/}.torrent"
             mktorrent ${mktorrent_args[*]} -o ${iso}.torrent ${iso}
         done
@@ -38,7 +39,7 @@ make_torrent(){
 
 prepare_transfer(){
     target_dir="/iso/${profile}/"
-    src_dir="${cache_dir_iso}/${profile}/"
+    src_dir="${iso_pool}/${profile}/"
     ${torrent} && make_torrent
 }
 

lib/util-iso-yaml.sh

@@ -9,24 +9,14 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-get_preset(){
-    local p=${tmp_dir}/${kernel}.preset
-    cp ${DATADIR}/linux.preset $p
-    sed -e "s|@kernel@|$kernel|g" \
-        -e "s|@arch@|${target_arch}|g"\
-        -i $p
-    echo $p
-}
-
 write_bootloader_conf(){
-    local conf="$1/bootloader.conf" efi_boot_loader='grub'
+    local conf="$1/bootloader.conf"
     msg2 "Writing %s ..." "${conf##*/}"
-    source "$(get_preset)"
     echo '---' > "$conf"
-    echo "efiBootLoader: \"${efi_boot_loader}\"" >> "$conf"
-    echo "kernel: \"${ALL_kver#*/boot}\"" >> "$conf"
-    echo "img: \"${default_image#*/boot}\"" >> "$conf"
-    echo "fallback: \"${fallback_image#*/boot}\"" >> "$conf"
+    echo "efiBootLoader: \"grub\"" >> "$conf"
+    echo "kernel: \"/vmlinuz-$kernel-${target_arch}\"" >> "$conf"
+    echo "img: \"/initramfs-$kernel-${target_arch}.img\"" >> "$conf"
+    echo "fallback: \"/initramfs-$kernel-${target_arch}-fallback.img\"" >> "$conf"
     echo 'timeout: "10"' >> "$conf"
     echo "kernelLine: \", with ${kernel}\"" >> "$conf"
     echo "fallbackKernelLine: \", with ${kernel} (fallback initramfs)\"" >> "$conf"
@@ -43,11 +33,7 @@ write_servicescfg_conf(){
     echo '' >> "$conf"
     echo 'services:' >> "$conf"
     echo '    enabled:' >> "$conf"
-    for s in ${openrc_boot[@]};do
-        echo "      - name: $s" >> "$conf"
-        echo '        runlevel: boot' >> "$conf"
-    done
-    for s in ${openrc_default[@]};do
+    for s in ${services[@]};do
         echo "      - name: $s" >> "$conf"
         echo '        runlevel: default' >> "$conf"
     done
@@ -83,20 +69,36 @@ write_netinstall_conf(){
     local conf="$1/netinstall.conf"
     msg2 "Writing %s ..." "${conf##*/}"
     echo "---" > "$conf"
-    echo "groupsUrl: ${netgroups}/netgroups-${initsys}.yaml" >> "$conf"
+    echo "groupsUrl: ${netgroups}" >> "$conf"
+}
+
+write_unpack_conf(){
+    local conf="$1/unpackfs.conf"
+    msg2 "Writing %s ..." "${conf##*/}"
+    echo "---" > "$conf"
+    echo "unpack:" >> "$conf"
+    echo "    - source: \"/run/${iso_name}/bootmnt/${iso_name}/${target_arch}/rootfs.sfs\"" >> "$conf"
+    echo "      sourcefs: \"squashfs\"" >> "$conf"
+    echo "      destination: \"\"" >> "$conf"
+    if [[ -f "${desktop_list}" ]] ; then
+        echo "    - source: \"/run/${iso_name}/bootmnt/${iso_name}/${target_arch}/desktopfs.sfs\"" >> "$conf"
+        echo "      sourcefs: \"squashfs\"" >> "$conf"
+        echo "      destination: \"\"" >> "$conf"
+    fi
 }
 
 configure_calamares(){
-    local modules_dir="$1"
-    if [[ -d $modules_dir ]];then
+    local dest="$1" mods="$1/etc/calamares/modules"
+    if [[ -d $dest/etc/calamares/modules ]];then
         info "Configuring [Calamares]"
-        write_users_conf "$modules_dir"
-        write_netinstall_conf "$modules_dir"
-        write_initcpio_conf "$modules_dir"
+        write_netinstall_conf "$mods"
+        write_unpack_conf "$mods"
+        write_users_conf "$mods"
+        write_initcpio_conf "$mods"
         case ${initsys} in
-            'openrc') write_servicescfg_conf "$modules_dir" ;;
+            'openrc') write_servicescfg_conf "$mods" ;;
         esac
-        write_bootloader_conf "$modules_dir"
+        write_bootloader_conf "$mods"
         info "Done configuring [Calamares]"
     fi
 }

lib/util-iso.sh

@@ -10,11 +10,64 @@
 # GNU General Public License for more details.
 
 import ${LIBDIR}/util-chroot.sh
-import ${LIBDIR}/util-iso-chroot.sh
 import ${LIBDIR}/util-iso-grub.sh
-import ${LIBDIR}/util-yaml.sh
-import ${LIBDIR}/util-iso-mount.sh
-import ${LIBDIR}/util-profile.sh
+import ${LIBDIR}/util-iso-yaml.sh
+import ${LIBDIR}/util-iso-profile.sh
+
+track_img() {
+    info "mount: [%s]" "$2"
+    mount "$@" && IMG_ACTIVE_MOUNTS=("$2" "${IMG_ACTIVE_MOUNTS[@]}")
+}
+
+mount_img() {
+    IMG_ACTIVE_MOUNTS=()
+    mkdir -p "$2"
+    track_img "$1" "$2"
+}
+
+umount_img() {
+    if [[ -n ${IMG_ACTIVE_MOUNTS[@]} ]];then
+        info "umount: [%s]" "${IMG_ACTIVE_MOUNTS[@]}"
+        umount "${IMG_ACTIVE_MOUNTS[@]}"
+        unset IMG_ACTIVE_MOUNTS
+        rm -r "$1"
+    fi
+}
+
+track_fs() {
+    info "overlayfs mount: [%s]" "$5"
+    mount "$@" && FS_ACTIVE_MOUNTS=("$5" "${FS_ACTIVE_MOUNTS[@]}")
+}
+
+mount_overlay(){
+    FS_ACTIVE_MOUNTS=()
+    local lower= upper="$1" work="$2" pkglist="$3"
+    local fs=${upper##*/}
+    local rootfs="$work/rootfs" desktopfs="$work/desktopfs" livefs="$work/livefs"
+    mkdir -p "${mnt_dir}/work"
+    mkdir -p "$upper"
+    case $fs in
+        desktopfs) lower="$rootfs" ;;
+        livefs)
+            lower="$rootfs"
+            [[ -f $pkglist ]] && lower="$desktopfs":"$rootfs"
+        ;;
+        bootfs)
+            lower="$livefs":"$rootfs"
+            [[ -f $pkglist ]] && lower="$livefs":"$desktopfs":"$rootfs"
+        ;;
+    esac
+    track_fs -t overlay overlay -olowerdir="$lower",upperdir="$upper",workdir="${mnt_dir}/work" "$upper"
+}
+
+umount_overlay(){
+    if [[ -n ${FS_ACTIVE_MOUNTS[@]} ]];then
+        info "overlayfs umount: [%s]" "${FS_ACTIVE_MOUNTS[@]}"
+        umount "${FS_ACTIVE_MOUNTS[@]}"
+        unset FS_ACTIVE_MOUNTS
+        rm -rf "${mnt_dir}/work"
+    fi
+}
 
 error_function() {
     if [[ -p $logpipe ]]; then
@@ -33,9 +86,9 @@ error_function() {
 
 # $1: function
 run_log(){
-    local func="$1"
+    local func="$1" log_dir='/var/log/artools'
     local logfile=${log_dir}/$(gen_iso_fn).$func.log
-    logpipe=$(mktemp -u "${tmp_dir}/$func.pipe.XXXXXXXX")
+    logpipe=$(mktemp -u "/tmp/$func.pipe.XXXXXXXX")
     mkfifo "$logpipe"
     tee "$logfile" < "$logpipe" &
     local teepid=$!
@@ -78,13 +131,118 @@ prepare_traps(){
 #     trap 'trap_exit USR1 "$(gettext "An unknown error has occurred. Exiting...")"' ERR
 }
 
+add_svc_rc(){
+    local mnt="$1" name="$2" rlvl="$3"
+    if [[ -f $mnt/etc/init.d/$name ]];then
+        msg2 "Setting %s ..." "$name"
+        chroot $mnt rc-update add $name $rlvl &>/dev/null
+    fi
+}
+
+set_xdm(){
+    if [[ -f $1/etc/conf.d/xdm ]];then
+        local conf='DISPLAYMANAGER="'${displaymanager}'"'
+        sed -i -e "s|^.*DISPLAYMANAGER=.*|${conf}|" $1/etc/conf.d/xdm
+    fi
+}
+
+configure_hosts(){
+    sed -e "s|localhost.localdomain|localhost.localdomain ${hostname}|" -i $1/etc/hosts
+}
+
+configure_logind(){
+    local conf=$1/etc/$2/logind.conf
+    if [[ -e $conf ]];then
+        msg2 "Configuring logind ..."
+        sed -i 's/#\(HandleSuspendKey=\)suspend/\1ignore/' "$conf"
+        sed -i 's/#\(HandleLidSwitch=\)suspend/\1ignore/' "$conf"
+        sed -i 's/#\(HandleHibernateKey=\)hibernate/\1ignore/' "$conf"
+    fi
+}
+
+configure_services(){
+    local mnt="$1"
+    info "Configuring [%s]" "${initsys}"
+    case ${initsys} in
+        'openrc')
+            for svc in ${services[@]}; do
+                [[ $svc == "xdm" ]] && set_xdm "$mnt"
+                add_svc_rc "$mnt" "$svc" "default"
+            done
+            for svc in ${services_live[@]}; do
+                add_svc_rc "$mnt" "$svc" "default"
+            done
+        ;;
+    esac
+    info "Done configuring [%s]" "${initsys}"
+}
+
+configure_system(){
+    local mnt="$1"
+    case ${initsys} in
+        'openrc')
+            configure_logind "$mnt" "elogind"
+        ;;
+    esac
+    echo ${hostname} > $mnt/etc/hostname
+}
+
+clean_iso_root(){
+    local dest="$1"
+    msg "Deleting isoroot [%s] ..." "${dest##*/}"
+    rm -rf --one-file-system "$dest"
+}
+
+clean_up_image(){
+    local path mnt="$1"
+    msg2 "Cleaning [%s]" "${mnt##*/}"
+
+    default_locale "reset" "$mnt"
+    path=$mnt/boot
+    if [[ -d "$path" ]]; then
+        find "$path" -name 'initramfs*.img' -delete &> /dev/null
+    fi
+    path=$mnt/var/lib/pacman/sync
+    if [[ -d $path ]];then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/cache/pacman/pkg
+    if [[ -d $path ]]; then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/log
+    if [[ -d $path ]]; then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/tmp
+    if [[ -d $path ]];then
+        find "$path" -mindepth 1 -delete &> /dev/null
+    fi
+    path=$mnt/tmp
+    if [[ -d $path ]];then
+        find "$path" -mindepth 1 -delete &> /dev/null
+    fi
+
+    if [[ ${mnt##*/} == 'livefs' ]];then
+        rm -rf "$mnt/etc/pacman.d/gnupg"
+    fi
+
+    find "$mnt" -name *.pacnew -name *.pacsave -name *.pacorig -delete
+    if [[ -f "$mnt/boot/grub/grub.cfg" ]]; then
+        rm $mnt/boot/grub/grub.cfg
+    fi
+    if [[ -f "$mnt/etc/machine-id" ]]; then
+        rm $mnt/etc/machine-id
+    fi
+}
+
 configure_live_image(){
     local fs="$1"
     msg "Configuring [livefs]"
     configure_hosts "$fs"
     configure_system "$fs"
     configure_services "$fs"
-    configure_calamares "$fs/etc/calamares/modules"
+    configure_calamares "$fs"
     write_live_session_conf "$fs"
     msg "Done configuring [livefs]"
 }
@@ -101,9 +259,9 @@ make_sig () {
 
 make_checksum(){
     local idir="$1" file="$2"
-    msg2 "Creating md5sum ..."
+    msg2 "Creating sha512sum ..."
     cd $idir
-    md5sum $file.sfs > $file.md5
+    sha512sum $file.sfs > $file.sha512
     cd ${OLDPWD}
 }
 
@@ -121,8 +279,8 @@ make_sfs() {
     msg "Generating SquashFS image for %s" "${src}"
     if [[ -f "${sfs}" ]]; then
         local has_changed_dir=$(find ${src} -newer ${sfs})
-        msg2 "Possible changes for %s ..." "${src}"  >> ${tmp_dir}/buildiso.debug
-        msg2 "%s" "${has_changed_dir}" >> ${tmp_dir}/buildiso.debug
+        msg2 "Possible changes for %s ..." "${src}"  >> /tmp/buildiso.debug
+        msg2 "%s" "${has_changed_dir}" >> /tmp/buildiso.debug
         if [[ -n "${has_changed_dir}" ]]; then
             msg2 "SquashFS image %s is not up to date, rebuilding..." "${sfs}"
             rm "${sfs}"
@@ -198,14 +356,11 @@ assemble_iso(){
         -no-emul-boot -boot-load-size 4 -boot-info-table --grub2-boot-info \
         -eltorito-alt-boot \
         -append_partition 2 0xef ${iso_root}/efi.img \
-        -e --interval:appended_partition_2:all:: \
+        -e --interval:appended_partition_2:all:: -iso_mbr_part_type 0x00 \
         -no-emul-boot \
         -iso-level 3 \
         -o ${iso_dir}/${iso_file} \
         ${iso_root}/
-
-#         arg to add with xorriso-1.4.7
-#         -iso_mbr_part_type 0x00
 }
 
 # Build ISO
@@ -344,23 +499,6 @@ make_bootfs() {
     fi
 }
 
-configure_grub(){
-    local conf="$1"
-    local default_args="artixbasedir=${iso_name} artixlabel=${iso_label}" boot_args=('quiet')
-
-    sed -e "s|@DIST_NAME@|${iso_name}|g" \
-        -e "s|@ARCH@|${target_arch}|g" \
-        -e "s|@DEFAULT_ARGS@|${default_args}|g" \
-        -e "s|@BOOT_ARGS@|${boot_args[*]}|g" \
-        -e "s|@PROFILE@|${profile}|g" \
-        -i $conf
-}
-
-configure_grub_theme(){
-    local conf="$1"
-    sed -e "s|@DIST@|${iso_name}|" -i "$conf"
-}
-
 make_grub(){
     if [[ ! -e ${work_dir}/grub.lock ]]; then
         msg "Prepare [/iso/boot/grub]"
@@ -368,7 +506,6 @@ make_grub(){
         prepare_grub "${work_dir}/rootfs" "${work_dir}/livefs" "${iso_root}"
 
         configure_grub "${iso_root}/boot/grub/kernels.cfg"
-        configure_grub_theme "${iso_root}/boot/grub/variable.cfg"
 
         : > ${work_dir}/grub.lock
         msg "Done [/iso/boot/grub]"
@@ -384,14 +521,14 @@ compress_images(){
 
 prepare_images(){
     local timer=$(get_timer)
-    load_pkgs "${root_list}" "${target_arch}" "${initsys}" "${kernel}"
+    load_pkgs "${root_list}" "${initsys}" "${kernel}"
     run_safe "make_rootfs"
     if [[ -f "${desktop_list}" ]] ; then
-        load_pkgs "${desktop_list}" "${target_arch}" "${initsys}" "${kernel}"
+        load_pkgs "${desktop_list}" "${initsys}" "${kernel}"
         run_safe "make_desktopfs"
     fi
     if [[ -f ${live_list} ]]; then
-        load_pkgs "${live_list}" "${target_arch}" "${initsys}" "${kernel}"
+        load_pkgs "${live_list}" "${initsys}" "${kernel}"
         run_safe "make_livefs"
     fi
     run_safe "make_bootfs"

lib/util-msg.sh

@@ -8,61 +8,22 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-export LC_MESSAGES=C
+# export LC_MESSAGES=C
 export LANG=C
 
-declare ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW=''
+source /usr/share/makepkg/util.sh
 
 if [[ -t 2 ]]; then
-    # prefer terminal safe colored and bold text when tput is supported
-    if tput setaf 0 &>/dev/null; then
-        ALL_OFF="$(tput sgr0)"
-        BOLD="$(tput bold)"
-        RED="${BOLD}$(tput setaf 1)"
-        GREEN="${BOLD}$(tput setaf 2)"
-        YELLOW="${BOLD}$(tput setaf 3)"
-        BLUE="${BOLD}$(tput setaf 4)"
-    else
-        ALL_OFF="\e[0m"
-        BOLD="\e[1m"
-        RED="${BOLD}\e[31m"
-        GREEN="${BOLD}\e[32m"
-        YELLOW="${BOLD}\e[33m"
-        BLUE="${BOLD}\e[34m"
-    fi
+    colorize
+else
+    declare -gr ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW=''
 fi
-readonly ALL_OFF BOLD BLUE GREEN RED YELLOW
-
-plain() {
-    local mesg=$1; shift
-    printf "${BOLD}    ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-msg() {
-    local mesg=$1; shift
-    printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-msg2() {
-    local mesg=$1; shift
-    printf "${BLUE}  ->${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
 
 info() {
     local mesg=$1; shift
     printf "${YELLOW} -->${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
 }
 
-warning() {
-    local mesg=$1; shift
-    printf "${YELLOW}==> WARNING:${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-error() {
-    local mesg=$1; shift
-    printf "${RED}==> ERROR:${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
 stat_busy() {
     local mesg=$1; shift
     printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}...${ALL_OFF}" "$@" >&2
@@ -117,7 +78,17 @@ die() {
 
 msg_table_header(){
     local mesg=$1; shift
-    printf "${GREEN} ${mesg} ${ALL_OFF}\n" "$@" >&2
+    printf "${BLUE} ${mesg} ${ALL_OFF}\n" "$@" >&2
+}
+
+msg_row_downgrade(){
+    local mesg=$1; shift
+    printf "${YELLOW} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+msg_row_notify(){
+    local mesg=$1; shift
+    printf "${GREEN} ${mesg}${ALL_OFF}\n" "$@" >&2
 }
 
 msg_row(){
@@ -125,9 +96,9 @@ msg_row(){
     printf "${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
 }
 
-msg_row_update(){
+msg_row_upgrade(){
     local mesg=$1; shift
-    printf "${RED}${BOLD} ${mesg} ${ALL_OFF}\n" "$@" >&2
+    printf "${RED}${RED} ${mesg} ${ALL_OFF}\n" "$@" >&2
 }
 
 import(){

lib/util-pkg-publish.sh

@@ -1,71 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-import ${LIBDIR}/util-pkg.sh
-
-del_from_repo(){
-    local repo="$1" destarch="$2" pkg="$3" ver result
-    local repo_path=${repos_root}/$repo/os/$destarch
-    source $pkg/PKGBUILD
-    for name in ${pkgname[@]};do
-        [[ $arch == any ]] && CARCH=any
-        ver=$(get_full_version $name)
-        if ! result=$(find_cached_package "$name" "$ver" "$CARCH");then
-            cd $repo_path
-            repo-remove -R $repo.db.tar.xz $name
-        fi
-    done
-}
-
-move_to_repo(){
-    local repo_src="$1" repo_dest="$2" repo_arch="$3"
-    local repo_path=${repos_root}/$repo_src/os/$repo_arch
-    local src=$PWD
-    local filelist=${workspace_dir}/$repo_src.files.txt
-    local pkglist=${workspace_dir}/$repo_src.pkgs.txt
-    [[ -n ${PKGDEST} ]] && src=${PKGDEST}
-    cd $repo_path
-    msg "Writing repo lists [%s]" "$repo_src"
-    ls *.pkg.tar.xz{,.sig} > $filelist
-    ls *.pkg.tar.xz > $pkglist
-    # uncomment for local test run
-#     rsync -v --files-from="$filelist" $repo_path "$src"
-    rm -v *
-    repo-add $repo_src.db.tar.xz
-    repo_path=${repos_root}/$repo_dest/os/$repo_arch
-    local move=$(cat $filelist) pkgs=$(cat $pkglist)
-    msg "Reading repo lists [%s]" "$repo_dest"
-    for f in ${move[@]};do
-        ln -sfv $src/$f $repo_path/
-    done
-    cd $repo_path
-    repo-add -R $repo_dest.db.tar.xz ${pkgs[@]}
-}
-
-add_to_repo(){
-    local repo="$1" destarch="$2" pkg="$3" ver pkgfile result
-    local repo_path=${repos_root}/$repo/os/$destarch
-    source $pkg/PKGBUILD
-    local dest=$pkg
-    for name in ${pkgname[@]};do
-        [[ $arch == any ]] && CARCH=any
-        ver=$(get_full_version $name)
-        if ! result=$(find_cached_package "$name" "$ver" "$CARCH"); then
-            pkgfile=$name-$ver-$CARCH.pkg.tar.xz
-            [[ -n ${PKGDEST} ]] && dest=${PKGDEST}/$pkgfile
-            [[ -e $dest.sig ]] && rm $dest.sig
-            signfile $dest
-            ln -sf $dest{,.sig} $repo_path/
-            cd $repo_path
-            repo-add -R $repo.db.tar.xz $pkgfile
-        fi
-    done
-}

lib/util-pkg-tree.sh

@@ -1,236 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-get_local_head(){
-    echo $(git log --pretty=%H ...refs/heads/$1^ | head -n 1)
-}
-
-get_remote_head(){
-    echo $(git ls-remote origin -h refs/heads/$1 | cut -f1)
-}
-
-is_dirty() {
-    [[ $(git diff --shortstat 2> /dev/null | tail -n1) != "" ]] || return 1
-    return 0
-}
-
-show_version_table(){
-    declare -A UPDATES
-    msg_table_header "%-30s %-30s %-30s %-30s" "Repository" "Package" "Artix version" "Arch version"
-    for repo in ${repo_tree_artix[@]}; do
-        for pkg in ${tree_dir_artix}/$repo/*; do
-            if [[ -f $pkg/PKGBUILD ]];then
-                source $pkg/PKGBUILD 2>/dev/null
-                package=${pkg##*/}
-                artixver=$(get_full_version $package)
-                set_import_path "$repo" "$package"
-                if [[ -f $src/PKGBUILD ]];then
-                    source $src/PKGBUILD 2>/dev/null
-                    archver=$(get_full_version $package)
-                fi
-                if [ $(vercmp $artixver $archver) -lt 0 ];then
-                    UPDATES[$package]="$pkg/PKGBUILD $src/PKGBUILD"
-                    msg_row_update "%-30s %-30s %-30s %-30s" "$repo" "$package" "$artixver" "$archver"
-                fi
-            fi
-            unset pkgver epoch pkgrel artixver archver package
-        done
-    done
-    rm ${patches_dir}/*.patch
-    for upd in "${!UPDATES[@]}"; do
-        msg "Writing %s update patch ..." "$upd"
-        diff -u ${UPDATES[$upd]} > ${patches_dir}/"$upd"-archlinux.patch
-    done
-}
-
-sync_tree(){
-    local branch="master" repo="$1"
-    git checkout $branch
-    local local_head=$(get_local_head "$branch")
-    local remote_head=$(get_remote_head "$branch")
-    local timer=$(get_timer)
-    msg "Checking [%s] ..." "$repo"
-    msg2 "local: %s" "${local_head}"
-    msg2 "remote: %s" "${remote_head}"
-    if [[ "${local_head}" == "${remote_head}" ]]; then
-        info "nothing to do"
-    else
-        info "needs sync"
-        git pull origin $branch
-    fi
-    msg "Done [%s]" "$repo"
-    show_elapsed_time "${FUNCNAME}" "${timer}"
-}
-
-clone_tree(){
-    local timer=$(get_timer) repo="$1" host_tree="$2"
-    msg "Preparing [%s] ..." "$repo"
-    info "clone"
-    git clone $host_tree.git
-    msg "Done [%s]" "$repo"
-    show_elapsed_time "${FUNCNAME}" "${timer}"
-}
-
-sync_tree_arch(){
-    cd ${tree_dir_arch}
-        for repo in ${repo_tree_arch[@]};do
-            if [[ -d ${repo} ]];then
-                cd ${repo}
-                    sync_tree "${repo}"
-                cd ..
-            else
-                clone_tree "${repo}" "${host_tree_arch}/${repo}"
-            fi
-        done
-    cd ..
-}
-
-sync_tree_artix(){
-    cd ${tree_dir_artix}
-        for repo in ${repo_tree_artix[@]};do
-            if [[ -d ${repo} ]];then
-                cd ${repo}
-                    sync_tree "${repo}"
-                cd ..
-            else
-                clone_tree "${repo}" "${host_tree_artix}/${repo}"
-            fi
-        done
-    cd ..
-}
-
-read_import_list(){
-    local repo="$1"
-    local _space="s| ||g" _clean=':a;N;$!ba;s/\n/ /g' _com_rm="s|#.*||g"
-    import_list=$(sed "$_com_rm" "${list_dir_import}/$repo.list" | sed "$_space" | sed "$_clean")
-}
-
-is_untracked(){
-    [[ $(git ls-files --others --exclude-standard)  != "" ]] || return 1
-    return 0
-}
-
-patch_pkg(){
-    local pkg="$1"
-    case $pkg in
-        'glibc')
-            sed -e 's|{locale,systemd/system,tmpfiles.d}|{locale,tmpfiles.d}|' \
-                -e '/nscd.service/d' \
-                -i $pkg/PKGBUILD
-        ;;
-        'bash')
-            sed -e 's|system.bash_logout)|system.bash_logout\n        artix.bashrc)|' \
-                -e 's|etc/bash.|etc/bash/|g' \
-                -e 's|install -dm755 "$pkgdir"/etc/skel/|install -dm755 "$pkgdir"/etc/{skel,bash/bashrc.d}/|' \
-                -e 's|/etc/skel/.bash_logout|/etc/skel/.bash_logout\n  install -m644 artix.bashrc "$pkgdir"/etc/bash/bashrc.d/artix.bashrc|' \
-                -i $pkg/PKGBUILD
-
-            patch -p1 -i $DATADIR/patches/dot-bashrc.patch
-            patch -p1 -i $DATADIR/patches/system-bashrc.patch
-            patch -p1 -i $DATADIR/patches/system-bashrc_logout.patch
-            patch -p1 -i $DATADIR/patches/artix-bashrc.patch
-            cd $pkg
-                updpkgsums
-            cd ..
-        ;;
-    esac
-}
-
-set_import_path(){
-    local arch_dir arch_repo import_path
-    local repo="$1" pkg="$2"
-    case $repo in
-        system|world)
-            if [[ "$repo" == 'system' ]];then
-                arch_repo=core
-                arch_dir=packages
-            fi
-            if [[ "$repo" == 'world' ]];then
-                arch_repo=extra
-                arch_dir=packages
-            fi
-            import_path=${tree_dir_arch}/$arch_dir/$pkg/repos
-            src=$import_path/$arch_repo-x86_64
-            if [[ -d $import_path/$arch_repo-any ]];then
-                src=$import_path/$arch_repo-any
-            elif [[ -d $import_path/testing-x86_64 ]];then
-                src=$import_path/testing-x86_64
-            elif [[ -d $import_path/testing-any ]];then
-                src=$import_path/testing-any
-            fi
-        ;;
-        galaxy)
-            arch_repo=community
-            arch_dir=$arch_repo
-            import_path=${tree_dir_arch}/$arch_dir/$pkg/repos/$arch_repo
-            src=$import_path-x86_64
-            if [[ -d $import_path-any ]];then
-                src=$import_path-any
-            elif [[ -d $import_path-testing-x86_64 ]];then
-                src=$import_path-testing-x86_64
-            elif [[ -d $import_path-testing-any ]];then
-                src=$import_path-testing-any
-            fi
-        ;;
-        lib32)
-            if [[ "$pkg" == 'llvm' ]];then
-                arch_repo=extra
-                arch_dir=packages
-                import_path=${tree_dir_arch}/$arch_dir/$pkg/repos
-                src=$import_path/extra-x86_64
-                if [[ -d $import_path/testing-x86_64 ]];then
-                    src=$import_path/testing-x86_64
-                fi
-            else
-                arch_repo=multilib
-                arch_dir=community
-                import_path=${tree_dir_arch}/$arch_dir/$pkg/repos
-                src=$import_path/$arch_repo-x86_64
-                if [[ -d $import_path/$arch_repo-testing-x86_64 ]];then
-                    src=$import_path/$arch_repo-testing-x86_64
-                fi
-            fi
-        ;;
-    esac
-}
-
-import_from_arch(){
-    local timer=$(get_timer) branch='testing' push="$1"
-    for repo in ${repo_tree_artix[@]};do
-        read_import_list "$repo"
-        if [[ -n ${import_list[@]} ]];then
-            cd ${tree_dir_artix}/$repo
-            git checkout $branch &> /dev/null
-            $(is_dirty) && die "[%s] has uncommited changes!" "${repo}"
-            git pull origin "$branch"
-            msg "Import into [%s]" "$repo"
-            for pkg in ${import_list[@]};do
-                source $pkg/PKGBUILD 2>/dev/null
-                local ver=$(get_full_version $pkg)
-                msg2 "package: %s-%s" "$pkg" "$ver"
-                set_import_path "$repo" "$pkg"
-                rsync "${rsync_args[@]}"  $src/ ${tree_dir_artix}/$repo/$pkg/
-                if $(is_dirty) || $(is_untracked); then
-                    patch_pkg "$pkg"
-                    ${push} && git add "$pkg"
-                    msg2 "Archlinux import: [%s]" "$pkg-$ver"
-                    if ${push};then
-                        git commit -m "Archlinux import: $pkg-$ver"
-                        sleep 10
-                        git push origin "$branch"
-                    fi
-                fi
-                unset pkgver epoch pkgrel ver
-            done
-        fi
-    done
-    show_elapsed_time "${FUNCNAME}" "${timer}"
-}

lib/util-pkg.sh

@@ -9,13 +9,190 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-in_array() {
-    local needle=$1; shift
-    local item
-    for item in "$@"; do
-        [[ $item = $needle ]] && return 0 # Found
-    done
-    return 1 # Not Found
+get_local_head(){
+    echo $(git log --pretty=%H ...refs/heads/$1^ | head -n 1)
+}
+
+get_remote_head(){
+    echo $(git ls-remote origin -h refs/heads/$1 | cut -f1)
+}
+
+is_dirty() {
+    [[ $(git diff --shortstat 2> /dev/null | tail -n1) != "" ]] || return 1
+    return 0
+}
+
+is_untracked(){
+    [[ $(git ls-files --others --exclude-standard)  != "" ]] || return 1
+    return 0
+}
+
+patch_pkg(){
+    local pkg="$1" repo="$2"
+    case $pkg in
+        'glibc')
+            sed -e 's|{locale,systemd/system,tmpfiles.d}|{locale,tmpfiles.d}|' \
+                -e '/nscd.service/d' \
+                -i $pkg/trunk/PKGBUILD
+        ;;
+        'tp_smapi'|'acpi_call'|'r8168'|'bbswitch')
+            sed -e 's|-ARCH|-ARTIX|g' -i $pkg/trunk/PKGBUILD
+        ;;
+        'nvidia')
+            sed -e 's|-ARCH|-ARTIX|g'  -e 's|for Arch kernel|for Artix kernel|g' \
+                -e 's|for LTS Arch kernel|for LTS Artix kernel|g' \
+                -i $pkg/trunk/PKGBUILD
+        ;;
+        'linux')
+            sed -e 's|-ARCH|-ARTIX|g' -i $pkg/trunk/PKGBUILD
+            sed -e 's|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION="-ARTIX"|' \
+                -e 's|CONFIG_DEFAULT_HOSTNAME=.*|CONFIG_DEFAULT_HOSTNAME="artixlinux"|' \
+                -i $pkg/trunk/config
+            cd $pkg/trunk
+                updpkgsums
+            cd ../..
+
+        ;;
+        'licenses')
+            sed -e 's|https://www.archlinux.org/|https://www.artixlinux.org/|' -i $pkg/trunk/PKGBUILD
+        ;;
+        'bash')
+            sed -e 's|system.bash_logout)|system.bash_logout artix.bashrc)|' \
+            -e "s|etc/bash.|etc/bash/|g" \
+            -e 's|"$pkgdir/etc/skel/.bash_logout"|"$pkgdir/etc/skel/.bash_logout"\n  install -Dm644 artix.bashrc $pkgdir/etc/bash/bashrc.d/artix.bashrc|' \
+            -i $pkg/trunk/PKGBUILD
+
+
+            cd $pkg/trunk
+                patch -Np 1 -i ${DATADIR}/patches/artix-bash.patch
+                updpkgsums
+            cd ../..
+        ;;
+    esac
+}
+
+find_tree(){
+    local tree="$1" pkg="$2"
+    local result=$(find $tree -mindepth 2 -maxdepth 2 -type d -name "$pkg")
+    result=${result%/*}
+    echo ${result##*/}
+}
+
+clone_tree(){
+    local timer=$(get_timer) host_tree="$1"
+    git clone $host_tree.git
+    show_elapsed_time "${FUNCNAME}" "${timer}"
+}
+
+pull_tree(){
+    local branch="master"
+    local local_head=$(get_local_head "$branch")
+    local remote_head=$(get_remote_head "$branch")
+    if [[ "${local_head}" == "${remote_head}" ]]; then
+        msg2 "remote changes: no"
+    else
+        msg2 "remote changes: yes"
+        git pull origin "$branch"
+    fi
+}
+
+push_tree(){
+    local branch="master"
+    git push origin "$branch"
+}
+
+get_import_path(){
+    local tree="$1" import_path=
+    case $tree in
+        packages) import_path=${tree_dir_arch}/packages ;;
+        packages-galaxy) import_path=${tree_dir_arch}/community ;;
+    esac
+    echo $import_path
+}
+
+is_valid_repo(){
+    local src="$1"
+    case $src in
+        core|extra|community|multilib|testing|staging|community-testing|community-staging|multilib-testing|multilib-staging|trunk) return 0 ;;
+        *) return 1 ;;
+    esac
+}
+
+find_repo(){
+    local pkg="$1" repo=
+
+    if [[ -d $pkg/repos/core-x86_64 ]];then
+        repo=core-x86_64
+    elif [[ -d $pkg/repos/core-any ]];then
+        repo=core-any
+    fi
+
+    if [[ -d $pkg/repos/extra-x86_64 ]];then
+        repo=extra-x86_64
+    elif [[ -d $pkg/repos/extra-any ]];then
+        repo=extra-any
+    fi
+
+    if [[ -d $pkg/repos/testing-x86_64 ]];then
+        repo=testing-x86_64
+    elif [[ -d $pkg/repos/testing-any ]];then
+        repo=testing-any
+    fi
+
+    if [[ -d $pkg/repos/staging-x86_64 ]];then
+        repo=staging-x86_64
+    elif [[ -d $pkg/repos/staging-any ]];then
+        repo=staging-any
+    fi
+
+    if [[ -d $pkg/repos/community-x86_64 ]];then
+        repo=community-x86_64
+    elif [[ -d $pkg/repos/community-any ]];then
+        repo=community-any
+    fi
+
+    if [[ -d $pkg/repos/community-testing-x86_64 ]];then
+        repo=community-testing-x86_64
+    elif [[ -d $pkg/repos/community-testing-any ]];then
+        repo=community-testing-any
+    fi
+
+    if [[ -d $pkg/repos/community-staging-x86_64 ]];then
+        repo=community-staging-x86_64
+    elif [[ -d $pkg/repos/community-staging-any ]];then
+        repo=community-staging-any
+    fi
+
+    if [[ -d $pkg/repos/multilib-x86_64 ]];then
+        repo=multilib-x86_64
+    fi
+
+    if [[ -d $pkg/repos/multilib-testing-x86_64 ]];then
+        repo=multilib-testing-x86_64
+    fi
+
+    if [[ -d $pkg/repos/multilib-staging-x86_64 ]];then
+        repo=multilib-staging-x86_64
+    fi
+
+    echo $repo
+}
+
+arch_to_artix_repo(){
+    local repo="$1"
+    case $repo in
+        core-*) repo=system ;;
+        extra-*) repo=world ;;
+        community-x86_64|community-any) repo=galaxy ;;
+        multilib-x86_64) repo=lib32 ;;
+        testing-*) repo=gremlins ;;
+        staging-*) repo=goblins ;;
+        multilib-testing-x86_64) repo=lib32-gremlins ;;
+        multilib-staging-x86_64) repo=lib32-goblins ;;
+        community-testing-*) repo=galaxy-gremlins ;;
+        community-staging-*) repo=galaxy-goblins ;;
+    esac
+    echo $repo
 }
 
 # $1: sofile
@@ -45,39 +222,15 @@ pkgver_equal() {
     fi
 }
 
-get_full_version() {
-    # set defaults if they weren't specified in buildfile
-    pkgbase=${pkgbase:-${pkgname[0]}}
-    epoch=${epoch:-0}
-    if [[ -z $1 ]]; then
-        if [[ $epoch ]] && (( ! $epoch )); then
-            echo $pkgver-$pkgrel
-        else
-            echo $epoch:$pkgver-$pkgrel
-        fi
-    else
-        for i in pkgver pkgrel epoch; do
-            local indirect="${i}_override"
-            eval $(declare -f package_$1 | sed -n "s/\(^[[:space:]]*$i=\)/${i}_override=/p")
-            [[ -z ${!indirect} ]] && eval ${indirect}=\"${!i}\"
-        done
-        if (( ! $epoch_override )); then
-            echo $pkgver_override-$pkgrel_override
-        else
-            echo $epoch_override:$pkgver_override-$pkgrel_override
-        fi
-    fi
-}
-
 find_cached_package() {
-    local searchdirs=("$PWD" "$PKGDEST") results=()
+    local searchdirs=("$PKGDEST" "$PWD") results=()
     local targetname=$1 targetver=$2 targetarch=$3
     local dir pkg pkgbasename name ver rel arch r results
 
     for dir in "${searchdirs[@]}"; do
         [[ -d $dir ]] || continue
 
-        for pkg in "$dir"/*.pkg.tar.xz; do
+        for pkg in "$dir"/*.pkg.tar.?z; do
             [[ -f $pkg ]] || continue
 
             # avoid adding duplicates of the same inode
@@ -87,7 +240,7 @@ find_cached_package() {
 
             # split apart package filename into parts
             pkgbasename=${pkg##*/}
-            pkgbasename=${pkgbasename%.pkg.tar?(.?z)}
+            pkgbasename=${pkgbasename%.pkg.tar.?z}
 
             arch=${pkgbasename##*-}
             pkgbasename=${pkgbasename%-"$arch"}
@@ -110,7 +263,7 @@ find_cached_package() {
             return 1
         ;;
         1)
-            printf '%s\n' "$results"
+            printf '%s\n' "${results[0]}"
             return 0
         ;;
         *)

lib/util-yaml-check.sh

@@ -1,54 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-import ${LIBDIR}/util-yaml.sh
-
-write_netgroup_yaml(){
-    local name="$1" yaml="$2"
-    msg2 "Writing %s ..." "${yaml##*/}"
-    echo "---" > "$yaml"
-    echo "- name: '$name'" >> "$yaml"
-    echo "  description: '$name'" >> "$yaml"
-    echo "  selected: false" >> "$yaml"
-    echo "  hidden: false" >> "$yaml"
-    echo "  critical: false" >> "$yaml"
-    echo "  packages:" >> "$yaml"
-    for p in ${packages[@]};do
-        echo "       - $p" >> "$yaml"
-    done
-}
-
-write_pacman_group_yaml(){
-    local group="$1"
-    packages=$(pacman -Sgq "$group")
-    prepare_dir "${cache_dir_netinstall}/pacman"
-    write_netgroup_yaml "$group" "${cache_dir_netinstall}/pacman/$group.yaml"
-}
-
-gen_fn(){
-    echo "${yaml_dir}/$1-${target_arch}-${initsys}.yaml"
-}
-
-prepare_build(){
-    load_profile "${profile}"
-    yaml_dir=${cache_dir_netinstall}/${profile}/${target_arch}
-    prepare_dir "${yaml_dir}"
-}
-
-build(){
-    load_pkgs "${root_list}" "${target_arch}" "${initsys}" "${kernel}"
-    write_netgroup_yaml "${profile}" "$(gen_fn "Packages-Root")"
-    if [[ -f "${desktop_list}" ]]; then
-        load_pkgs "${desktop_list}" "${target_arch}" "${initsys}" "${kernel}"
-        write_netgroup_yaml "${profile}" "$(gen_fn "Packages-Desktop")"
-    fi
-    ${calamares} && configure_calamares "${yaml_dir}"
-}

lib/util.sh

@@ -27,7 +27,7 @@ load_vars() {
     [[ -f $1 ]] || return 1
 
     for var in {SRC,SRCPKG,PKG,LOG}DEST MAKEFLAGS PACKAGER CARCH GPGKEY; do
-        [[ -z ${!var} ]] && eval $(grep -a "^${var}=" "$1")
+        [[ -z ${!var:-} ]] && eval "$(grep -a "^${var}=" "$1")"
     done
 
     return 0
@@ -54,14 +54,10 @@ get_osid(){
 
 init_artools_base(){
 
-    [[ -z ${target_arch} ]] && target_arch=$(uname -m)
+    target_arch=$(uname -m)
 
     [[ -z ${chroots_dir} ]] && chroots_dir='/var/lib/artools'
 
-    log_dir='/var/log/artools'
-
-    tmp_dir='/tmp'
-
     [[ -z ${workspace_dir} ]] && workspace_dir=/home/${OWNER}/artools-workspace
 
     prepare_dir "${workspace_dir}"
@@ -71,33 +67,23 @@ init_artools_pkg(){
 
     [[ -z ${tree_dir_artix} ]] && tree_dir_artix=${workspace_dir}/artix
 
-    [[ -z ${repo_tree_artix[@]} ]] && repo_tree_artix=('system' 'world' 'galaxy' 'lib32')
-
     [[ -z ${host_tree_artix} ]] && host_tree_artix='https://github.com/artix-linux'
 
     [[ -z ${tree_dir_arch} ]] && tree_dir_arch=${workspace_dir}/archlinux
 
-    [[ -z ${repo_tree_arch} ]] && repo_tree_arch=('packages' 'community')
-
     [[ -z ${host_tree_arch} ]] && host_tree_arch='git://projects.archlinux.org/svntogit'
 
-    list_dir_import="${SYSCONFDIR}/import.list.d"
-
-    [[ -d ${AT_USERCONFDIR}/import.list.d ]] && list_dir_import=${AT_USERCONFDIR}/import.list.d
-
     chroots_pkg="${chroots_dir}/buildpkg"
 
-    [[ -z ${patches_dir} ]] && patches_dir=${workspace_dir}/archlinux-patches
-
     [[ -z ${repos_root} ]] && repos_root="${workspace_dir}/repos"
 }
 
 init_artools_iso(){
     chroots_iso="${chroots_dir}/buildiso"
 
-    cache_dir_iso="${workspace_dir}/iso"
+    [[ -z ${iso_pool} ]] && iso_pool="${workspace_dir}/iso"
 
-    prepare_dir "${cache_dir_iso}"
+    prepare_dir "${iso_pool}"
 
     profile='base'
 
@@ -111,6 +97,8 @@ init_artools_iso(){
 
     [[ -z ${kernel} ]] && kernel="linux-lts"
 
+    [[ -z ${kernel_args} ]] && kernel_args=""
+
     [[ -z ${gpgkey} ]] && gpgkey=''
 
     [[ -z ${uplimit} ]] && uplimit=100