comp (#56)

Reviewed-on: #56
Co-authored-by: artoo <artoo@artixlinux.org>
Co-committed-by: artoo <artoo@artixlinux.org>

Makefile

@@ -5,7 +5,6 @@ PREFIX ?= /usr
 SYSCONFDIR = /etc
 BINDIR = $(PREFIX)/bin
 DATADIR = $(PREFIX)/share
-CPIODIR = $(SYSCONFDIR)/initcpio
 
 BASE_CONF = \
 	data/conf/artools-base.conf
@@ -88,9 +87,6 @@ PKG_DATA = \
 	data/pacman/makepkg.conf \
 	data/valid-names.conf
 
-PROTO = \
-	$(wildcard data/proto/*.proto)
-
 PATCHES = \
 	$(wildcard data/patches/*.patch)
 
@@ -164,13 +160,7 @@ install_pkg:
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
 	install $(FILEMODE) $(PATCHES) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
 
-	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/proto
-	install $(FILEMODE) $(PROTO) $(DESTDIR)$(DATADIR)/$(TOOLS)/proto
-
-install_cpio:
-	+make CPIODIR=$(CPIODIR) DESTDIR=$(DESTDIR) -C initcpio install
-
-install_iso: install_cpio
+install_iso:
 	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 	install $(FILEMODE) $(ISO_CONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 

README.md

@@ -30,7 +30,6 @@ artools
   * dosfstools
   * libisoburn
   * squashfs-tools
-  * mkinitcpio
   * grub
 
 #### Configuration

bin/base/chroot-run.in

@@ -32,6 +32,7 @@ kill_chroot_process(){
             fi
         fi
     done
+    sleep 1
 }
 
 # umask might have been changed in /etc/profile

bin/iso/buildiso.in

@@ -138,7 +138,7 @@ make_bootfs() {
         if "${use_dracut}"; then
             prepare_initramfs_dracut "${bootfs}"
         else
-            prepare_initramfs "${bootfs}"
+            prepare_initramfs_mkinitcpio "${bootfs}"
         fi
 
         umount_overlayfs
@@ -161,7 +161,7 @@ make_grub(){
         if ${use_dracut}; then
             configure_grub_dracut
         else
-            configure_grub
+            configure_grub_mkinitcpio
         fi
 
         : > "${work_dir}"/grub.lock
@@ -207,6 +207,10 @@ prepare_build(){
     live_dir=/LiveOS
 
     mnt_dir=${chroots_iso}/${profile}/mnt
+
+    if [[ -n "${GPG_KEY}" ]]; then
+        ${use_dracut} || export_gpg_publickey
+    fi
 }
 
 display_settings(){
@@ -217,6 +221,8 @@ display_settings(){
 
     msg "ISO SETTINGS:"
     msg2 "ISO_VERSION: %s" "${ISO_VERSION}"
+    msg2 "COMPRESSION: %s" "${COMPRESSION}"
+    [[ "${COMPRESSION}" == 'zstd' ]] && msg2 "COMPRESSION_LEVEL: %s" "${COMPRESSION_LEVEL}"
 
     msg "BUILD:"
     show_profile
@@ -328,7 +334,7 @@ usage() {
     echo '    -i <name>          Init system to use'
     echo "                       [default: ${INITSYS}]"
     echo '    -g <key>           The gpg key for img signing'
-    echo "                       [default: ${GPG_KEY}]"
+    echo "                       [default: none]"
     echo '    -m                 Set SquashFS image mode to persistence'
     echo '    -c                 Disable clean work dir'
     echo '    -x                 Build chroot only'

bin/pkg/commitpkg.in

@@ -49,7 +49,7 @@ subrepo_pull(){
 prepare_commit(){
     # create new layout, copy & remove repos
     if [[ -d repos ]]; then
-        msg "Switching to new layout ..."
+        msg2 "Switching to new layout ..."
         [[ ! -d "$CARCH" ]] && mkdir "$CARCH"
 
         for r in repos/*; do
@@ -63,7 +63,7 @@ prepare_commit(){
 
         git rm -r repos
         git commit -m "switch to new repo layout"
-        msg "Done switch"
+        msg2 "Done switch"
     fi
 
     if [[ $action == 'add' ]] || [[ $action == 'move' ]] ;then
@@ -87,7 +87,7 @@ check_rebuild(){
 
 check_team(){
     if [[ "${repo_src}" == "${valid_names[0]}" \
-    && "${repo_dest}" == "${valid_names[1]}" ]] || \
+        && "${repo_dest}" == "${valid_names[1]}" ]] || \
         [[ "${repo_src}" == "${valid_names[1]}" \
         && "${repo_dest}" == "${valid_names[0]}" ]] || \
         [[ "${repo_src}" == "${valid_names[1]}" \
@@ -115,25 +115,29 @@ path_config() {
     . "$pkgbuild"
 }
 
+get_repo_commit_msg() {
+    echo "[${repo_src}] -> [${repo_dest}] '${package}-$(get_full_version)' ${action}"
+}
+
+get_commit_msg() {
+    echo "[${repo_src}] '${package}-$(get_full_version)' ${action}"
+}
+
 commit_pkg() {
     local commit_msg pkg
-    if ${remove};then
+    if ${remove}; then
         action='remove'
+        commit_msg=$(get_commit_msg)
+        msg "Action: %s" "$commit_msg"
         if [[ "${repo_src}" == 'trunk' ]];then
-            pkg=${package}
             git rm -r trunk
         else
-            pkg="${package}-$(get_full_version)"
-
             prepare_commit
-
             git rm -r "$CARCH/${repo_src}"
         fi
-        commit_msg="[${repo_src}] '$pkg' ${action}"
-        msg "Action: %s" "$commit_msg"
     else
         action='modify'
-        commit_msg="[${repo_src}] '${package}-$(get_full_version)' ${action}"
+        commit_msg=$(get_commit_msg)
         msg "Action: %s" "$commit_msg"
         git add .
     fi
@@ -142,25 +146,22 @@ commit_pkg() {
 
 repo_commit_pkg() {
     local commit_msg
-    if [[ "${repo_src}" == 'trunk' ]];then
+    if [[ "${repo_src}" == 'trunk' ]]; then
         action='add'
-
+        commit_msg=$(get_repo_commit_msg)
+        msg "Action: %s" "$commit_msg"
         prepare_commit
         check_rebuild
-
         cp trunk/* "$CARCH/${repo_dest}"/
     else
         action='move'
         [[ ! -f $pkgbuild ]] && die "%s does not exist!" "$pkgbuild"
-
+        commit_msg=$(get_repo_commit_msg)
+        msg "Action: %s" "$commit_msg"
         prepare_commit
-
         cp "$CARCH/${repo_src}"/* "$CARCH/${repo_dest}"/
         git rm -r "$CARCH/${repo_src}"
     fi
-    commit_msg="[${repo_src}] -> [${repo_dest}] '${package}-$(get_full_version)' ${action}"
-    msg "Action: %s" "$commit_msg"
-
     git add .
     git commit -m "$commit_msg"
 }

bin/pkg/links-add.in

@@ -35,7 +35,6 @@ REPO_DB_PREFIX=
 REPO_DB_SUFFIX=
 LOCKFILE=
 CLEAN_LOCK=0
-PREVENT_DOWNGRADE=0
 
 # ensure we have a sane umask set
 umask 0022
@@ -53,7 +52,6 @@ Multiple packages to add can be specified on the command line.\n"
         printf -- "\n"
         printf -- "Options:\n"
         printf -- "  -n, --new         only add packages that are not already in the database\n"
-        printf -- "  -p, --prevent-downgrade  do not add package to database if a newer version is already present\n"
     elif [[ $cmd == "links-remove" ]] ; then
         printf -- "Usage: links-remove [options] <path-to-db> <packagename> ...\n"
         printf -- "\n"
@@ -193,18 +191,6 @@ db_write_entry() {
         if (( ONLYADDNEW )); then
             return 0
         fi
-    else
-        pkgentry=$(find_pkgentry "$pkgname")
-        if [[ -n $pkgentry ]]; then
-
-            local version=$(sed -n '/^%VERSION%$/ {n;p;q}' "$pkgentry/desc")
-            if (( $(vercmp "$version" "$pkgver") > 0 )); then
-                warning "A newer version for '%s' is already present in database" "$pkgname"
-                if (( PREVENT_DOWNGRADE )); then
-                    return 0
-                fi
-            fi
-        fi
     fi
 
     # remove an existing entry if it exists, ignore failures
@@ -467,7 +453,6 @@ while (( $# )); do
         -s|--sign) SIGN=1 ;;
         -k|--key) KEY=1 ; shift; GPGKEY=$1 ;;
         -v|--verify) VERIFY=1 ;;
-        -p|--prevent-downgrade) PREVENT_DOWNGRADE=1 ;;
         *) args+=("$1") ;;
     esac
     shift

data/conf/artools-iso.conf

@@ -8,8 +8,14 @@
 # the dist release; default: auto
 # ISO_VERSION=$(date +%Y%m%d)
 
-# possible values: openrc, runit, s6, 66
+# possible values: openrc, runit, s6, suite66
 # INITSYS="openrc"
 
 # gpg key; leave empty or commented to skip img signing
 # GPG_KEY=""
+
+# possible values: zstd (default), xz
+# COMPRESSION="zstd"
+
+# zstd only: range 1..22
+# COMPRESSION_LEVEL=15

data/conf/artools-pkg.conf

@@ -13,8 +13,8 @@
 #         packages-openrc
 #         packages-runit
 #         packages-s6
-#         packages-66
-#         packages-python
+#         packages-suite66
+#         python-world
 #         packages-perl
 #         packages-java
 #         packages-ruby
@@ -30,6 +30,10 @@
 #         packages-devel
 #         packages-lib32
 #         packages-qt6
+#         packages-office
+#         packages-misc
+#         packages-python
+#         python-galaxy
 # )
 
 # TREE_DIR_ARCH=${WORKSPACE_DIR}/archlinux

data/pacman/makepkg.conf

@@ -15,7 +15,7 @@ DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
           'ftp::/usr/bin/curl -gqfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
           'http::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
           'https::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
-          'rsync::/usr/bin/rsync --no-motd -zz %u %o'
+          'rsync::/usr/bin/rsync --no-motd -z %u %o'
           'scp::/usr/bin/scp -C %u %o')
 
 # Other common tools:
@@ -26,6 +26,7 @@ DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
 #-- The package required by makepkg to download VCS sources
 #  Format: 'protocol::package'
 VCSCLIENTS=('bzr::bzr'
+            'fossil::fossil'
             'git::git'
             'hg::mercurial'
             'svn::subversion')
@@ -38,21 +39,25 @@ CARCH="x86_64"
 CHOST="x86_64-pc-linux-gnu"
 
 #-- Compiler and Linker Flags
-CPPFLAGS="-D_FORTIFY_SOURCE=2"
-CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt"
-CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt"
+#CPPFLAGS=""
+CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions \
+        -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security \
+        -fstack-clash-protection -fcf-protection"
+CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
 LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
+#RUSTFLAGS="-C opt-level=2"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 #-- Debugging flags
 DEBUG_CFLAGS="-g -fvar-tracking-assignments"
 DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
+#DEBUG_RUSTFLAGS="-C debuginfo=2"
 
 #########################################################################
 # BUILD ENVIRONMENT
 #########################################################################
 #
-# Defaults: BUILDENV=(!distcc !color !ccache check !sign)
+# Makepkg defaults: BUILDENV=(!distcc !color !ccache check !sign)
 #  A negated environment option will do the opposite of the comments below.
 #
 #-- distcc:   Use the Distributed C/C++/ObjC compiler
@@ -75,7 +80,7 @@ BUILDENV=(!distcc color !ccache check !sign)
 #   These are default values for the options=() settings
 #########################################################################
 #
-# Default: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug)
+# Makepkg defaults: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug !lto)
 #  A negated option will do the opposite of the comments below.
 #
 #-- strip:      Strip symbols from binaries/libraries
@@ -86,11 +91,12 @@ BUILDENV=(!distcc color !ccache check !sign)
 #-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
 #-- purge:      Remove files specified by PURGE_TARGETS
 #-- debug:      Add debugging flags as specified in DEBUG_* variables
+#-- lto:        Add compile flags for building with link time optimization
 #
-OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug)
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug !lto)
 
-#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
-INTEGRITY_CHECK=(md5)
+#-- File integrity checks to use. Valid: md5, sha1, sha224, sha256, sha384, sha512, b2
+INTEGRITY_CHECK=(sha256)
 #-- Options to be used when stripping binaries. See `man strip' for details.
 STRIP_BINARIES="--strip-all"
 #-- Options to be used when stripping shared libraries. See `man strip' for details.
@@ -146,4 +152,10 @@ COMPRESSLZ=(lzip -c -f)
 PKGEXT='.pkg.tar.zst'
 SRCEXT='.src.tar.gz'
 
+#########################################################################
+# OTHER
+#########################################################################
+#
+#-- Command used to run pacman as root, instead of trying sudo and su
+#PACMAN_AUTH=()
 # vim: set ft=sh ts=2 sw=2 et:

data/pacman/pacman-default.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -83,15 +85,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-docker.conf

@@ -38,10 +38,11 @@ NoExtract  = usr/share/vim/vim*/lang/*
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
-
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -51,7 +52,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -96,16 +97,3 @@ Include = /etc/pacman.d/mirrorlist
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-#[extra]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[community]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

data/pacman/pacman-gnome-wobble.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -92,18 +94,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-goblins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -89,18 +91,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-gremlins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -83,15 +85,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-kde-wobble.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -92,18 +94,6 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]

data/pacman/pacman-lib32-goblins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES

data/pacman/pacman-lib32-gremlins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES

data/pacman/pacman-lib32.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES

data/proto/PKGBUILD.openrc.proto

@@ -1,38 +0,0 @@
-# Maintainer: Your Name <youremail@domain.com>
-
-pkgname=NAME-openrc
-pkgver=VERSION
-pkgrel=1
-epoch=
-pkgdesc="Openrc NAME init script"
-arch=('any')
-url="https://gitea.artixlinux.org/artixlinux/packages-openrc"
-license=('GPL2')
-groups=()
-depends=("openrc" "NAME")
-makedepends=()
-checkdepends=()
-optdepends=()
-provides=("init-NAME")
-conflicts=("init-NAME")
-replaces=()
-backup=()
-options=()
-install=
-changelog=
-source=(NAME.{confd,initd})
-sha256sums=()
-
-_inst_openrc() {
-    local sv="$1"
-    if [ -f "${srcdir}/$sv".confd ]; then
-        install -Dm644 "${srcdir}/$sv".confd "${pkgdir}"/etc/conf.d/"$sv"
-    fi
-    if [ -f "${srcdir}/$sv".initd ]; then
-        install -Dm755 "${srcdir}/$sv".initd "${pkgdir}"/etc/init.d/"$sv"
-    fi
-}
-
-package() {
-    _inst_openrc "NAME"
-}

data/proto/PKGBUILD.runit.proto

@@ -1,41 +0,0 @@
-# Maintainer: Your Name <youremail@domain.com>
-
-pkgname=NAME-runit
-pkgver=VERSION
-pkgrel=1
-epoch=
-pkgdesc="Runit NAME init script"
-arch=('any')
-url="https://gitea.artixlinux.org/artixlinux/packages-runit"
-license=('GPL2')
-groups=()
-depends=("runit" "NAME")
-makedepends=()
-checkdepends=()
-optdepends=()
-provides=("init-NAME")
-conflicts=("init-NAME")
-replaces=()
-backup=()
-options=()
-install=
-changelog=
-source=(NAME.{run,finish,check})
-sha256sums=()
-
-_inst_runit() {
-    local sv="$1"
-    if [ -f "${srcdir}/$sv".conf ]; then
-        install -Dm644 "${srcdir}/$sv".conf "${pkgdir}"/etc/runit/sv/"$sv"/conf
-    fi
-
-    for f in run finish check; do
-        if [ -f "${srcdir}/$sv.$f" ]; then
-            install -Dm755 "${srcdir}/$sv.$f" "${pkgdir}"/etc/runit/sv/"$sv/$f"
-        fi
-    done
-}
-
-package() {
-    _inst_runit "NAME"
-}

data/proto/PKGBUILD.s6.proto

@@ -1,39 +0,0 @@
-# Maintainer: Your Name <youremail@domain.com>
-
-pkgname=NAME-s6
-pkgver=VERSION
-pkgrel=1
-epoch=
-pkgdesc="S6 NAME init script"
-arch=('any')
-url="https://gitea.artixlinux.org/artixlinux/packages-s6"
-license=('GPL2')
-groups=()
-depends=("s6-base" "NAME")
-makedepends=()
-checkdepends=()
-optdepends=()
-provides=("init-NAME")
-conflicts=("init-NAME")
-replaces=()
-backup=()
-options=()
-install=
-changelog=
-source=(NAME.{dependencies,down,up,type})
-sha256sums=()
-
-
-_inst_s6(){
-    local sv="$1"
-    for f in dependencies down type up; do
-        if [ -f "${srcdir}/$sv.$f" ]; then
-            install -Dm644 "${srcdir}/$sv.$f" "${pkgdir}"/etc/s6/sv/"$sv/$f"
-        fi
-    done
-}
-
-package() {
-    _inst_s6 "NAME"
-}
-

data/proto/PKGBUILD.suite66.proto

@@ -1,34 +0,0 @@
-# Maintainer: Your Name <youremail@domain.com>
-
-pkgname=NAME-66
-pkgver=VERSION
-pkgrel=1
-epoch=
-pkgdesc="Suite66 NAME init script"
-arch=('any')
-url="https://gitea.artixlinux.org/artixlinux/packages-66"
-license=('GPL2')
-groups=()
-depends=("suite66-base" "NAME")
-makedepends=()
-checkdepends=()
-optdepends=()
-provides=("init-NAME")
-conflicts=("init-NAME")
-replaces=()
-backup=()
-options=()
-install=
-changelog=
-source=(NAME)
-sha256sums=()
-
-_inst_66() {
-    local sv="$1"
-    install -Dm644 "$sv" -t "${pkgdir}"/etc/66/service
-}
-
-package() {
-    _inst_66 "NAME"
-}
-

initcpio/Makefile

@@ -1,23 +0,0 @@
-DIRMODE = -dm0755
-MODE =  -m0755
-
-CPIOHOOKS = \
-	$(wildcard hooks/*)
-
-CPIOINST = \
-	$(wildcard install/*)
-
-SCRIPT = \
-	$(wildcard script/*)
-
-install_initcpio:
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/hooks
-	install $(MODE) $(CPIOHOOKS) $(DESTDIR)$(CPIODIR)/hooks
-
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(CPIOINST) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(SCRIPT) $(DESTDIR)$(CPIODIR)
-
-install: install_initcpio
-
-.PHONY: install

initcpio/hooks/artix

@@ -1,275 +0,0 @@
-# args: source, newroot, mountpoint
-_mnt_dmsnapshot() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}";
-    local img_name="${img_fullname%%.*}"
-    local dm_snap_name="${dm_snap_prefix}_${img_name}"
-    local ro_dev ro_dev_size rw_dev
-
-    ro_dev=$(losetup --find --show --read-only "${img}")
-    echo ${ro_dev} >> ${live_root}/used_block_devices
-    ro_dev_size=$(blockdev --getsz ${ro_dev})
-
-    if [[ "${cow_persistent}" == "P" ]]; then
-        if [[ -f "${cow}/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '${cow}/${cow_directory}/${img_name}.cow', using as persistent."
-        else
-            msg ":: Creating '${cow}/${cow_directory}/${img_name}.cow' as persistent."
-            truncate -s "${cow_spacesize}" "${cow}/${cow_directory}/${img_name}.cow"
-        fi
-    else
-        if [[ -f "${cow}/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '${cow}/${cow_directory}/${img_name}.cow' but non-persistent requested, removing."
-            rm -f "${cow}/${cow_directory}/${img_name}.cow"
-        fi
-        msg ":: Creating '${cow}/${cow_directory}/${img_name}.cow' as non-persistent."
-        truncate -s "${cow_spacesize}" "${cow}/${cow_directory}/${img_name}.cow"
-    fi
-
-    rw_dev=$(losetup --find --show "${cow}/${cow_directory}/${img_name}.cow")
-    echo ${rw_dev} >> ${live_root}/used_block_devices
-
-    dmsetup create ${dm_snap_name} --table "0 ${ro_dev_size} snapshot ${ro_dev} ${rw_dev} ${cow_persistent} ${cow_chunksize}"
-
-    if [[ "${cow_persistent}" != "P" ]]; then
-        rm -f "${cow}/${cow_directory}/${img_name}.cow"
-    fi
-
-    _mnt_dev "/dev/mapper/${dm_snap_name}" "${mnt}" "-w" "defaults"
-    echo $(readlink -f /dev/mapper/${dm_snap_name}) >> ${live_root}/used_block_devices
-}
-
-# args: source, newroot, mountpoint
-_mnt_overlayfs() {
-    local src="${1}"
-    local newroot="${2}"
-    local mnt="${3}"
-    local work_dir="${overlay_root}/work"
-    local upper_dir="${overlay_root}/upper"
-
-    mkdir -p "${upper_dir}" "${work_dir}"
-
-    mount -t overlay overlay -o lowerdir="${src}",upperdir="${upper_dir}",workdir="${work_dir}" "${newroot}${mnt}"
-}
-
-# args: /path/to/image_file, mountpoint
-_mnt_sfs() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}"
-    local sfs_dev
-    local oper=$( [[ -n "${ip}" && -n "${miso_http_srv}" ]] && echo "mv" || echo "cp" )
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg -n ":: Copying squashfs image to RAM..."
-        if ! "${oper}" "${img}" "${cp2ram}/${img_fullname}" ; then
-            echo "ERROR: while copy '${img}' to '${cp2ram}/${img_fullname}'"
-            launch_interactive_shell
-        fi
-        img="${cp2ram}/${img_fullname}"
-        msg "done."
-    fi
-    sfs_dev=$(losetup --find --show --read-only "${img}")
-    echo ${sfs_dev} >> ${live_root}/used_block_devices
-    _mnt_dev "${sfs_dev}" "${mnt}" "-r" "defaults"
-}
-
-# args: device, mountpoint, flags, opts
-_mnt_dev() {
-    local dev="${1}"
-    local mnt="${2}"
-    local flg="${3}"
-    local opts="${4}"
-
-    mkdir -p "${mnt}"
-
-    msg ":: Mounting '${dev}' to '${mnt}'"
-
-    while ! poll_device "${dev}" 30; do
-        echo "ERROR: '${dev}' device did not show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    if mount -o "${opts}" "${flg}" "${dev}" "${mnt}"; then
-        msg ":: Device '${dev}' mounted successfully."
-    else
-        echo "ERROR; Failed to mount '${dev}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-_verify_checksum() {
-    local _status
-    cd "${bootmnt}/${root}"
-    sha512sum -c $1.img.sha512 > /tmp/checksum.log 2>&1
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-_verify_signature() {
-    local _status
-    cd "${bootmnt}/${root}"
-    gpg --homedir /gpg --status-fd 1 --verify $1.img.sig 2>/dev/null | grep -qE '^\[GNUPG:\] GOODSIG'
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-run_hook() {
-    [[ -z "${copytoram_size}" ]] && copytoram_size="75%"
-    [[ -z "${root}" ]] && root="LiveOS"
-
-    [[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="artix"
-    [[ -z "${artixdevice}" ]] && artixdevice="/dev/disk/by-label/${label}"
-    [[ -z "${cow_spacesize}" ]] && cow_spacesize="256M"
-    [[ -z "${overlay_root_size}" ]] && overlay_root_size="75%"
-
-    if [[ -n "${cow_label}" ]]; then
-        cow_device="/dev/disk/by-label/${cow_label}"
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    elif [[ -n "${cow_device}" ]]; then
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    else
-        cow_persistent="N"
-    fi
-
-    [[ -z "${cow_flags}" ]] && cow_flags="defaults"
-    [[ -z "${cow_directory}" ]] && cow_directory="persistent_${label}"
-    [[ -z "${cow_chunksize}" ]] && cow_chunksize="8"
-    [[ -z "${overlay}" ]] && overlay=""
-
-    lower_dir=''
-    live_root="/run/artix"
-    bootmnt="${live_root}/bootmnt"
-    overlay_root="${live_root}/overlay_root"
-    cow="${live_root}/cowspace"
-    cp2ram="${live_root}/copytoram"
-
-    # set mount handler for artix
-    mount_handler="artix_mount_handler"
-}
-
-_check_sum() {
-    local fs="${1}"
-    if [[ -f "${bootmnt}/${root}/${fs}.img" ]]; then
-        if [[ -f "${bootmnt}/${root}/${fs}.img.md5" ]]; then
-            msg -n ":: Self-test requested, please wait..."
-            if _verify_checksum "${fs}"; then
-                msg "done. Checksum is OK, continue booting."
-            else
-                echo "ERROR: one or more files are corrupted"
-                echo "see /tmp/checksum.log for details"
-                launch_interactive_shell
-            fi
-        else
-            echo "ERROR: checksum=y option specified but ${root}/${fs}.img.md5 not found"
-            launch_interactive_shell
-        fi
-    fi
-}
-
-_check_sig() {
-    local fs="${1}"
-    if [[ -f "${bootmnt}/${root}/${fs}.img" ]]; then
-        if [[ -f "${bootmnt}/${root}/${fs}.img.sig" ]]; then
-            msg -n ":: Signature verification requested, please wait..."
-            if _verify_signature "${fs}"; then
-                msg "done. Signature is OK, continue booting."
-            else
-                echo "ERROR: one or more files are corrupted"
-                launch_interactive_shell
-            fi
-        else
-            echo "ERROR: verify=y option specified but ${root}/${fs}.img.sig not found"
-            launch_interactive_shell
-        fi
-    fi
-}
-
-_gen_arg() {
-    local arg="${1}"
-    echo "${lower_dir:-}${lower_dir:+:}${arg}"
-}
-
-_mount_root_overlayfs() {
-    local sfs="${1}"
-    local src="${bootmnt}/${root}"
-    local dest_sfs="${live_root}/sfs"
-    local dest_img="${live_root}/img"
-
-    if [[ -f "${src}/${sfs}.img" ]]; then
-        _mnt_sfs "${src}/${sfs}.img" "${dest_sfs}/${sfs}"
-        local find_img="${dest_sfs}/${sfs}/LiveOS/${sfs}.img"
-        if [[ -f "${find_img}" ]]; then
-            mkdir -p ${dest_img}
-            lower_dir=$(_gen_arg "${dest_img}/${sfs}")
-            _mnt_dmsnapshot "${find_img}" "${dest_img}/${sfs}"
-        else
-            lower_dir=$(_gen_arg "${dest_sfs}/${sfs}")
-        fi
-    fi
-}
-
-# This function is called normally from init script, but it can be called
-# as chain from other mount handlers.
-# args: /path/to/newroot
-artix_mount_handler() {
-    local newroot="${1}"
-
-    if ! mountpoint -q "${bootmnt}"; then
-        _mnt_dev "${artixdevice}" "${bootmnt}" "-r" "defaults"
-        if [[ "${copytoram}" != "y" ]]; then
-            echo $(readlink -f ${artixdevice}) >> ${live_root}/used_block_devices
-        fi
-    fi
-
-    if [[ "${checksum}" == "y" ]]; then
-        _check_sum "rootfs"
-        [[ -n "${overlay}" ]] && _check_sum "${overlay}"
-    fi
-
-    if [[ "${verify}" == "y" ]]; then
-        _check_sig "rootfs"
-        [[ -n "${overlay}" ]] && _check_sig "${overlay}"
-    fi
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Mounting ${cp2ram} (tmpfs) filesystem, size=${copytoram_size}"
-        mkdir -p ${cp2ram}
-        mount -t tmpfs -o "size=${copytoram_size}",mode=0755 copytoram ${cp2ram}
-    fi
-
-    if [[ -n "${cow_device}" ]]; then
-        _mnt_dev "${cow_device}" "${cow}" "-r" "${cow_flags}"
-        echo $(readlink -f ${cow_device}) >> ${live_root}/used_block_devices
-        mount -o remount,rw "${cow}"
-    else
-        msg ":: Mounting ${cow} (tmpfs) filesystem, size=${cow_spacesize}..."
-        mkdir -p ${cow}
-        mount -t tmpfs -o "size=${cow_spacesize}",mode=0755 cowspace ${cow}
-    fi
-    mkdir -p -m 0700 "${cow}/${cow_directory}"
-
-    msg -n ":: Mounting overlay root (tmpfs) filesystem, size=${overlay_root_size}..."
-    mkdir -p ${overlay_root}
-    mount -t tmpfs -o "size=${overlay_root_size}",mode=0755 overlay_root ${overlay_root}
-
-    [[ -n "${overlay}" ]] && _mount_root_overlayfs "${overlay}"
-    _mount_root_overlayfs "rootfs"
-
-    _mnt_overlayfs "${lower_dir}" "${newroot}" "/"
-
-    if [[ "${copytoram}" == "y" ]]; then
-        umount -d ${bootmnt}
-        mkdir -p ${bootmnt}/${root}
-        mount -o bind ${cp2ram} ${bootmnt}/${root}
-    fi
-}
-
-# vim:ft=sh:ts=4:sw=4:et:

initcpio/hooks/artix_loop_mnt

@@ -1,35 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    [[ -n "${img_label}" ]] && img_dev="/dev/disk/by-label/${img_label}"
-    [[ -z "${img_flags}" ]] && img_flags="defaults"
-    if [[ -n "${img_dev}" && -n "${img_loop}" ]]; then
-        mount_handler="artix_loop_mount_handler"
-    fi
-}
-
-artix_loop_mount_handler () {
-    newroot="${1}"
-
-    local _dev_loop
-
-    msg ":: Setup a loop device from ${img_loop} located at device ${img_dev}"
-    _mnt_dev "${img_dev}" "${live_root}/img_dev" "-r" "${img_flags}"
-    if [[ "${copytoram}" != "y" ]]; then
-        echo $(readlink -f ${img_dev}) >> ${live_root}/used_block_devices
-    fi
-
-    if _dev_loop=$(losetup --find --show --read-only "${live_root}/img_dev/${img_loop}"); then
-        artixdevice="${_dev_loop}"
-    else
-        echo "ERROR: Setting loopback device for file '${live_root}/img_dev/${img_loop}'"
-        launch_interactive_shell
-    fi
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        losetup -d ${_dev_loop} 2>/dev/null
-        umount ${live_root}/img_dev
-    fi
-}

initcpio/hooks/artix_pxe_common

@@ -1,72 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    # Do *not* declare 'bootif_dev' local! We need it in run_latehook().
-    local i net_mac bootif_mac
-    # These variables will be parsed from /tmp/net-*.conf generated by ipconfig
-    local DEVICE
-    local IPV4ADDR IPV4BROADCAST IPV4NETMASK IPV4GATEWAY IPV4DNS0 IPV4DNS1
-    local HOSTNAME DNSDOMAIN NISDOMAIN ROOTSERVER ROOTPATH
-    local filename
-    # /tmp/net-*.conf
-
-    if [[ -n "${ip}" ]]; then
-        if [[ -n "${BOOTIF}" ]]; then
-            bootif_mac=${BOOTIF#01-}
-            bootif_mac=${bootif_mac//-/:}
-            for i in /sys/class/net/*/address; do
-                read net_mac < ${i}
-                if [[ "${bootif_mac}" == "${net_mac}" ]]; then
-                    bootif_dev=${i#/sys/class/net/}
-                    bootif_dev=${bootif_dev%/address}
-                    break
-                fi
-            done
-            if [[ "${ip}" == "dhcp" ]]; then
-               ip=":::::${bootif_dev}:dhcp"
-            else
-               ip="${ip}::${bootif_dev}"
-           fi
-        fi
-
-        # setup network and save some values
-        if ! ipconfig -t 20 "ip=${ip}"; then
-                echo "ERROR; Failed to configure network"
-                echo "   Falling back to interactive prompt"
-                echo "   You can try to fix the problem manually, log out when you are finished"
-                launch_interactive_shell
-        fi
-
-        . /tmp/net-*.conf
-
-        pxeserver=${ROOTSERVER}
-
-        # setup DNS resolver
-        if [[ "${IPV4DNS0}" != "0.0.0.0" ]]; then
-            echo "# added by artix_pxe_common hook" > /etc/resolv.conf
-            echo "nameserver ${IPV4DNS0}" >> /etc/resolv.conf
-        fi
-        if [[ "${IPV4DNS1}" != "0.0.0.0" ]]; then
-            echo "nameserver ${IPV4DNS1}" >> /etc/resolv.conf
-        fi
-        if [[ -n "${DNSDOMAIN}" ]]; then
-            echo "search ${DNSDOMAIN}" >> /etc/resolv.conf
-            echo "domain ${DNSDOMAIN}" >> /etc/resolv.conf
-        fi
-    fi
-}
-
-run_latehook () {
-    if [[ -n "${ip}" ]]; then
-        [[ -z "${copy_resolvconf}" ]] && copy_resolvconf="y"
-
-        if [[ "${copytoram}" == "y" ]]; then
-            if [[ -n "${bootif_dev}" ]]; then
-                ip addr flush dev "${bootif_dev}"
-                ip link set "${bootif_dev}" down
-            fi
-        elif [[ "${copy_resolvconf}" != "n" && -f /etc/resolv.conf ]]; then
-            cp /etc/resolv.conf /new_root/etc/resolv.conf
-        fi
-    fi
-}

initcpio/hooks/artix_pxe_http

@@ -1,63 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_http_srv}" ]]; then
-
-        # booting with http is always copy-to-ram, so set here to make sure
-        # addresses are flushed and interface is set down
-        copytoram="y"
-
-        artix_http_srv=$(eval echo ${artix_http_srv})
-        [[ -z "${artix_http_spc}" ]] && artix_http_spc="75%"
-
-        mount_handler="artix_pxe_http_mount_handler"
-    fi
-}
-
-# Fetch a file with CURL
-#
-# $1 URL
-# $2 Destination directory inside httpspace/${root}
-_curl_get() {
-    local _url="${1}"
-    local _dst="${2}"
-
-    msg ":: Downloading '${_url}'"
-    if ! curl -L -f -o "${live_root}/httpspace/${root}${_dst}/${_url##*/}" --create-dirs "${_url}"; then
-        echo "ERROR: Downloading '${_url}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-_get_sfs() {
-    local _sfs="${2}"
-    local _src=${artix_http_srv}${root}
-    if [[ ! -z "$( curl -s --head "${_src}/${_sfs}.img" | grep "OK" )" ]]; then
-        _curl_get "${_src}/${_sfs}.img" "/"
-
-        if [[ "${checksum}" == "y" ]]; then
-            _curl_get "${_src}/${_sfs}.md5" "/"
-        fi
-        if [[ "${verify}" == "y" ]]; then
-            _curl_get "${_src}/${_sfs}.img.sig" "/"
-        fi
-    fi
-}
-
-artix_pxe_http_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Mounting ${live_root}/httpspace (tmpfs) filesystem, size='${artix_http_spc}'"
-    mkdir -p "${live_root}/httpspace"
-    mount -t tmpfs -o size="${artix_http_spc}",mode=0755 httpspace "${live_root}/httpspace"
-
-    _get_sfs "rootfs"
-    [[ -n "${overlay}" ]] && _mount_root_overlayfs "${overlay}"
-
-    mkdir -p "${bootmnt}"
-    mount -o bind ${live_root}/httpspace ${bootmnt}
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_pxe_nbd

@@ -1,47 +0,0 @@
-# vim: set ft=sh:
-
-run_earlyhook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-        # Module autoloading like with loop devices does not work, doing manually...
-        modprobe nbd 2> /dev/null
-    fi
-}
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-
-        artix_nbd_srv=$(eval echo ${artix_nbd_srv})
-        [[ -z "${artix_nbd_name}" ]] && artix_nbd_name="artix"
-
-        mount_handler="artix_pxe_nbd_mount_handler"
-    fi
-}
-
-artix_pxe_nbd_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Waiting for boot device..."
-    while ! poll_device /dev/nbd0 30; do
-        echo "ERROR: boot device didn't show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    msg ":: Setup NBD from ${artix_nbd_srv} at /dev/nbd0"
-    if [[ "${copytoram}" != "n" ]]; then
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} /dev/nbd0
-        copytoram="y"
-    else
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} -persist /dev/nbd0
-    fi
-
-    artixdevice=/dev/nbd0
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Disconnect NBD from ${artix_nbd_srv} at /dev/nbd0"
-        nbd-client -d /dev/nbd0
-    fi
-}

initcpio/hooks/artix_pxe_nfs

@@ -1,30 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nfs_srv}" ]]; then
-
-        artix_nfs_srv=$(eval echo ${artix_nfs_srv})
-        [[ -n "${artix_nfs_opt}" ]] && artix_nfs_opt="-o ${artix_nfs_opt}"
-
-        mount_handler="artix_nfs_mount_handler"
-    fi
-}
-
-artix_nfs_mount_handler() {
-    newroot="${1}"
-    mkdir -p "${bootmnt}"
-    msg ":: Mounting '${artix_nfs_srv}'"
-    # Do not put "${artix_nfs_opt}" nfsmount fails!
-    if ! nfsmount ${artix_nfs_opt} "${artix_nfs_srv}" "${bootmnt}"; then
-        echo "ERROR: Mounting '${artix_nfs_srv}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-
-    if [[ "${copytoram}" != "n" ]]; then
-        copytoram="y"
-    fi
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_shutdown

@@ -1,6 +0,0 @@
-run_cleanuphook() {
-    rm -rf /usr/lib/modules
-    cp -ax / /run/initramfs
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "cdrom"
-    add_module "loop"
-    add_module "dm-snapshot"
-    add_module "overlay"
-
-    add_runscript
-
-    add_binary /usr/lib/udev/cdrom_id
-    add_binary blockdev
-    add_binary dmsetup
-    add_binary losetup
-    add_binary mountpoint
-    add_binary truncate
-    add_binary gpg
-    add_binary grep
-
-    add_file /usr/lib/udev/rules.d/60-cdrom_id.rules
-    add_file /usr/lib/udev/rules.d/10-dm.rules
-    add_file /usr/lib/udev/rules.d/95-dm-notify.rules
-    add_file /usr/lib/initcpio/udev/11-dm-initramfs.rules /usr/lib/udev/rules.d/11-dm-initramfs.rules
-    if [[ $ARTIX_GNUPG_FD ]]; then
-        mkdir -p "$BUILDROOT$dest"/gpg
-        gpg --homedir "$BUILDROOT$dest"/gpg --import <&$ARTIX_GNUPG_FD
-    fi
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_kms

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "radeon"
-    add_module "nouveau"
-    add_module "i915"
-    add_module "via-agp"
-    add_module "sis-agp"
-    add_module "intel-agp"
-}
-
-help() {
-    cat << HELPEOF
-Adds all common KMS drivers to the initramfs image.
-HELPEOF
-}

initcpio/install/artix_loop_mnt

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via loop device.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_common

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_checked_modules -f "(irda|phy|wimax|wireless|ppp_|plip|pppoe)" "/drivers/net/"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/ipconfig /bin/ipconfig
-
-    # Add hosts support files+dns
-    add_symlink /usr/lib/libnss_files.so.2 $(readlink /usr/lib/libnss_files.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_files.so.2)
-    add_symlink /usr/lib/libnss_dns.so.2 $(readlink /usr/lib/libnss_dns.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_dns.so.2)
-
-    add_dir /etc
-    echo "hosts: files dns" > $BUILDROOT/etc/nsswitch.conf
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_http

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-
-    add_binary curl
-
-    add_file $(readlink -f /etc/ssl/certs/ca-certificates.crt) /etc/ssl/certs/ca-certificates.crt
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and HTTP.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nbd

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nbd"
-
-    add_runscript
-
-    add_binary nbd-client
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NBD.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nfs

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nfs"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/nfsmount /bin/nfsmount
-}
-
-help() {
-    cat <<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NFS.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_shutdown

@@ -1,20 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_binary cp
-
-    add_runscript
-
-    add_file /etc/initcpio/artix_shutdown /shutdown
-}
-
-help() {
-    cat <<HELPEOF
-This hook will create a shutdown initramfs in /run/initramfs
-that we can pivot to on shutdown in order to unmount / and
-and others mount points, dm-snapshot devices and loopback devices.
-Mostly usefull for dm-snapshot persistent.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/script/artix_shutdown

@@ -1,37 +0,0 @@
-#!/bin/ash
-
-# /oldroot depends on things inside /oldroot/run/artix...
-mkdir /oldrun
-mount -n --move /oldroot/run /oldrun
-
-# Unmount all mounts now.
-umount $(mount | awk '$3 ~/^\/oldroot/ {print $3}' | sort -r)
-
-# Remove all dm-snapshot devices.
-dmsetup remove_all
-
-# Remove all loopback devices.
-for _lup in $(grep ^/dev/loop /oldrun/artix/used_block_devices | tac); do
-    if ! losetup -d ${_lup} 2> /dev/null; then
-        umount -d ${_lup}
-    fi
-done
-
-# Unmount the space used to store *.cow.
-umount /oldrun/artix/cowspace
-
-# Unmount boot device if needed (no copytoram=y used)
-if [[ ! -d /oldrun/artix/copytoram ]]; then
-    if [[ -d /oldrun/artix/img_dev ]]; then
-        umount /oldrun/artix/img_dev
-    else
-        umount /oldrun/bootmnt
-    fi
-fi
-
-# reboot / poweroff / halt, depending on the argument passed by init
-# if something invalid is passed, we halt
-case "$1" in
-  reboot|poweroff|halt) "$1" -f ;;
-  *) halt -f;;
-esac

lib/iso/calamares.sh

@@ -31,8 +31,8 @@ write_services_s6_conf(){
     write_services_conf 'svDir' '/etc/s6/sv' 'dbDir' '/etc/s6/rc/compiled' > "$conf"
 }
 
-write_services_66_conf(){
-    local conf="$1"/services-66.conf
+write_services_suite66_conf(){
+    local conf="$1"/services-suite66.conf
     write_services_conf 'svDir' '/etc/66/service' 'runsvDir' '/var/lib/66/system' > "$conf"
 }
 

lib/iso/grub.sh

@@ -2,20 +2,6 @@
 
 #{{{ grub
 
-configure_grub(){
-    msg "Configuring grub kernel options ..."
-    local ro_opts=()
-    local rw_opts=()
-    local kopts=("label=${iso_label}")
-
-    [[ "${profile}" != 'base' ]] && kopts+=('overlay=livefs')
-
-    sed -e "s|@kopts@|${kopts[*]}|" \
-        -e "s|@ro_opts@|${ro_opts[*]}|" \
-        -e "s|@rw_opts@|${rw_opts[*]}|" \
-        -i "${iso_root}"/boot/grub/kernels.cfg
-}
-
 prepare_grub(){
     local platform=i386-pc img='core.img' prefix=/boot/grub
     local lib="$1"/usr/lib/grub
@@ -23,7 +9,6 @@ prepare_grub(){
     local livecfg="$2"/usr/share/grub
     local grub=${iso_root}/boot/grub efi=${iso_root}/efi/boot
 
-
     prepare_dir "${grub}/${platform}"
 
     cp "${livecfg}"/cfg/*.cfg "${grub}"

lib/iso/initcpio.sh

@@ -2,56 +2,71 @@
 
 #{{{ initcpio
 
-write_mkinitcpio_conf() {
-    msg2 "Writing mkinitcpio.conf ..."
-    local conf="$1/etc/mkinitcpio-artix.conf"
-    printf "%s\n" 'MODULES=(loop dm-snapshot)' > "$conf"
-    printf "%s\n" 'COMPRESSION="xz"' >> "$conf"
-    if [[ "${profile}" == 'base' ]];then
-        printf "%s\n" 'HOOKS=(base udev artix_shutdown artix artix_loop_mnt
-                            artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs
-                            artix_kms modconf block filesystems keyboard keymap)' >> "$conf"
-    else
-        printf "%s\n" 'HOOKS=(base udev artix_shutdown artix artix_loop_mnt
-                            artix_kms modconf block filesystems keyboard keymap)' >> "$conf"
+make_checksum(){
+    local file="$1"
+    msg2 "Creating md5sum ..."
+    cd "${iso_root}${live_dir}"
+    md5sum "$file" > "$file".md5
+    cd "${OLDPWD}"
+}
+
+make_sig () {
+    local file="$1"
+    msg2 "Creating signature file..."
+    chown "${owner}:$(id --group "${owner}")" "${iso_root}${live_dir}"
+    su "${owner}" -c "gpg --detach-sign --output $file.sig --default-key ${GPG_KEY} $file"
+    chown "root:root" "${iso_root}${live_dir}"
+}
+
+export_gpg_publickey() {
+    key_export=${WORKSPACE_DIR}/pubkey.gpg
+    if [[ ! -e "${key_export}" ]]; then
+        gpg --batch --output "${key_export}" --export "${GPG_KEY}"
     fi
 }
 
-prepare_initcpio(){
-    msg2 "Copying initcpio ..."
-    local dest="$1"
-    cp /etc/initcpio/hooks/artix* "$dest"/etc/initcpio/hooks
-    cp /etc/initcpio/install/artix* "$dest"/etc/initcpio/install
-    cp /etc/initcpio/artix_shutdown "$dest"/etc/initcpio
-}
+prepare_initramfs_mkinitcpio() {
+    local mnt="$1" packages=() mkinitcpio_conf k
 
-prepare_initramfs(){
-    local mnt="$1"
+    mkinitcpio_conf=mkinitcpio-default.conf
+    [[ "${profile}" == 'base' ]] && mkinitcpio_conf=mkinitcpio-pxe.conf
+    k=$(<"$mnt"/usr/src/linux/version)
 
-    prepare_initcpio "$mnt"
+    read_from_list "${common_dir}/Packages-boot"
+    basestrap "${basestrap_args[@]}" "$mnt" "${packages[@]}"
 
-    write_mkinitcpio_conf "$mnt"
-
-    if [[ -n ${GPG_KEY} ]]; then
-        su "${owner}" -c "gpg --export ${GPG_KEY} >/tmp/GPG_KEY"
-        exec 17<>/tmp/GPG_KEY
+    if [[ -n "${GPG_KEY}" ]]; then
+        exec {ARTIX_GNUPG_FD}<>"${key_export}"
+        export ARTIX_GNUPG_FD
     fi
-    local _kernel
-     _kernel=$(<"$mnt"/usr/src/linux/version)
-    ARTIX_GNUPG_FD=${GPG_KEY:+17} artools-chroot "$mnt" \
-        /usr/bin/mkinitcpio -k "${_kernel}" \
-        -c /etc/mkinitcpio-artix.conf \
+
+    artools-chroot "$mnt" mkinitcpio -k "$k" \
+        -c /etc/"$mkinitcpio_conf" \
         -g /boot/initramfs.img
 
     if [[ -n "${GPG_KEY}" ]]; then
-        exec 17<&-
+        exec {ARTIX_GNUPG_FD}<&-
+        unset ARTIX_GNUPG_FD
     fi
-    if [[ -f /tmp/GPG_KEY ]]; then
-        rm /tmp/GPG_KEY
+    if [[ -f "${key_export}" ]]; then
+        rm "${key_export}"
     fi
-
     cp "$mnt"/boot/initramfs.img "${iso_root}"/boot/initramfs-"${arch}".img
     prepare_boot_extras "$mnt"
 }
 
+configure_grub_mkinitcpio() {
+    msg "Configuring grub kernel options ..."
+    local ro_opts=()
+    local rw_opts=()
+    local kopts=("label=${iso_label}")
+
+    [[ "${profile}" != 'base' ]] && kopts+=('overlay=livefs')
+
+    sed -e "s|@kopts@|${kopts[*]}|" \
+        -e "s|@ro_opts@|${ro_opts[*]}|" \
+        -e "s|@rw_opts@|${rw_opts[*]}|" \
+        -i "${iso_root}"/boot/grub/kernels.cfg
+}
+
 #}}}

lib/iso/services.sh

@@ -38,18 +38,17 @@ add_svc_s6(){
     local rlvl=/etc/s6/current
     # rebuild s6-linux-init binaries
     chroot "$mnt" rm -r "$rlvl"
-    chroot "$mnt" s6-linux-init-maker -1 -N -f /etc/s6/skel -G "/usr/bin/agetty -L -8 tty1 115200" -c "$rlvl" "$rlvl"
+    chroot "$mnt" s6-linux-init-maker -1 -N -f /etc/s6/skel -G "/usr/bin/agetty -L -8 tty7 115200" -c "$rlvl" "$rlvl"
     chroot "$mnt" mv "$rlvl"/bin/init "$rlvl"/bin/s6-init
     chroot "$mnt" cp -a "$rlvl"/bin /usr
 }
 
-add_svc_66(){
+add_svc_suite66(){
     local mnt="$1" names="$2"
-    chroot "$mnt" 66-tree -cnE root &>/dev/null
     for svc in $names; do
         if [[ -f "$mnt"/etc/66/service/"$svc" ]]; then
             msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
-            chroot "$mnt" 66-enable -t root "$svc" &>/dev/null
+            chroot "$mnt" 66-enable -t default "$svc" &>/dev/null
         fi
     done
 }

lib/iso/squash.sh

@@ -2,24 +2,6 @@
 
 #{{{ squash
 
-make_sig () {
-    local file="$1"
-    msg2 "Creating signature file..."
-    cd "${iso_root}${live_dir}"
-    chown "${owner}:$(id --group "${owner}")" "${iso_root}${live_dir}"
-    su "${owner}" -c "gpg --detach-sign --default-key ${GPG_KEY} $file"
-    chown -R root "${iso_root}${live_dir}"
-    cd "${OLDPWD}"
-}
-
-make_checksum(){
-    local file="$1"
-    msg2 "Creating md5sum ..."
-    cd "${iso_root}${live_dir}"
-    md5sum "$file" > "$file".md5
-    cd "${OLDPWD}"
-}
-
 make_ext_img(){
     local src="$1"
     local size=32G
@@ -85,14 +67,14 @@ make_sfs() {
 
         mksfs_args+=("${sfs_out}")
 
-        mksfs_args+=(-comp xz -b 256K -Xbcj x86 -noappend)
+        mksfs_args+=(-comp "${COMPRESSION}" "${COMPRESSION_ARGS[@]}" -noappend)
 
         mksquashfs "${mksfs_args[@]}"
 
         if ! ${use_dracut}; then
             make_checksum "${img_name}"
             if [[ -n ${GPG_KEY} ]];then
-                make_sig "${img_name}"
+                make_sig "${iso_root}${live_dir}/${img_name}"
             fi
         fi
         if ${persist}; then

lib/util-iso.sh

@@ -19,6 +19,18 @@ load_iso_config(){
 
     GPG_KEY=${GPG_KEY:-''}
 
+    COMPRESSION="${COMPRESSION:-zstd}"
+
+    COMPRESSION_LEVEL="${COMPRESSION_LEVEL:-15}"
+
+    if [[ -z "${COMPRESSION_ARGS[*]}" ]]; then
+        COMPRESSION_ARGS=(-Xcompression-level "${COMPRESSION_LEVEL}")
+    fi
+
+    if [[ "${COMPRESSION}" == 'xz' ]]; then
+        COMPRESSION_ARGS=(-Xbcj x86)
+    fi
+
     return 0
 }
 

lib/util-pkg.sh

@@ -31,7 +31,7 @@ load_pkg_config(){
         python-{world,galaxy}
     )
 
-    local init_tree=(packages-{openrc,runit,s6,66})
+    local init_tree=(packages-{openrc,runit,s6,suite66})
 
     local desktop_tree=(
         packages-{kf5,plasma,kde,qt6}