add initchooser

CMakeModules/CalamaresAddModuleSubdirectory.cmake

@@ -39,7 +39,6 @@
 
 include( CalamaresAddTranslations )
 include( CalamaresCheckModuleSelection )
-include( FeatureSummary )
 
 set( MODULE_DATA_DESTINATION share/calamares/modules )
 

CMakeModules/CalamaresAddTranslations.cmake

@@ -11,7 +11,6 @@
 # This file has not yet been documented for use outside of Calamares itself.
 
 include( CMakeParseArguments )
-include( FeatureSummary )
 
 # The Gettext module is still old-fashioned, ALLCAPS variables
 find_package( Gettext )

ci/txpush.sh

@@ -105,7 +105,6 @@ fi
 # those are done separately.
 _srcdirs="src/calamares src/libcalamares src/libcalamaresui src/modules src/qml"
 $LUPDATE -no-obsolete $_srcdirs -ts lang/calamares_en.ts
-grep '{1?}' lang/calamares_en.ts && { echo "lupdate has introduced weird markers." ; exit 1 ; }
 # Non-Transifex special-cases
 #
 # - timezone names can be translated, but that's 700+ strings I don't want

lang/python.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-12-27 20:44+0100\n"
+"POT-Creation-Date: 2023-09-28 22:49+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -22,15 +22,15 @@ msgstr ""
 msgid "Install bootloader."
 msgstr ""
 
-#: src/modules/bootloader/main.py:666
+#: src/modules/bootloader/main.py:644
 msgid "Failed to install grub, no partitions defined in global storage"
 msgstr ""
 
-#: src/modules/bootloader/main.py:926
+#: src/modules/bootloader/main.py:899
 msgid "Bootloader installation error"
 msgstr ""
 
-#: src/modules/bootloader/main.py:927
+#: src/modules/bootloader/main.py:900
 msgid ""
 "The bootloader could not be installed. The installation command <pre>{!s}</"
 "pre> returned error code {!s}."
@@ -99,8 +99,8 @@ msgstr ""
 msgid "Dummy python job."
 msgstr ""
 
-#: src/modules/dummypython/main.py:37 src/modules/dummypython/main.py:104
-#: src/modules/dummypython/main.py:105
+#: src/modules/dummypython/main.py:37 src/modules/dummypython/main.py:93
+#: src/modules/dummypython/main.py:94
 msgid "Dummy python step {}"
 msgstr ""
 
@@ -112,20 +112,20 @@ msgstr ""
 #: src/modules/fstab/main.py:411 src/modules/initcpiocfg/main.py:256
 #: src/modules/initcpiocfg/main.py:260 src/modules/initramfscfg/main.py:85
 #: src/modules/initramfscfg/main.py:89 src/modules/localecfg/main.py:140
-#: src/modules/mount/main.py:334 src/modules/networkcfg/main.py:106
+#: src/modules/mount/main.py:329 src/modules/networkcfg/main.py:105
 #: src/modules/openrcdmcryptcfg/main.py:72
 #: src/modules/openrcdmcryptcfg/main.py:76 src/modules/rawfs/main.py:164
 msgid "Configuration Error"
 msgstr ""
 
 #: src/modules/fstab/main.py:378 src/modules/initramfscfg/main.py:86
-#: src/modules/mount/main.py:335 src/modules/openrcdmcryptcfg/main.py:73
+#: src/modules/mount/main.py:330 src/modules/openrcdmcryptcfg/main.py:73
 #: src/modules/rawfs/main.py:165
 msgid "No partitions are defined for <pre>{!s}</pre> to use."
 msgstr ""
 
 #: src/modules/fstab/main.py:384 src/modules/initramfscfg/main.py:90
-#: src/modules/localecfg/main.py:141 src/modules/networkcfg/main.py:107
+#: src/modules/localecfg/main.py:141 src/modules/networkcfg/main.py:106
 #: src/modules/openrcdmcryptcfg/main.py:77
 msgid "No root mount point is given for <pre>{!s}</pre> to use."
 msgstr ""
@@ -134,7 +134,7 @@ msgstr ""
 msgid "No <pre>{!s}</pre> configuration is given for <pre>{!s}</pre> to use."
 msgstr ""
 
-#: src/modules/grubcfg/main.py:30
+#: src/modules/grubcfg/main.py:29
 msgid "Configure GRUB."
 msgstr ""
 
@@ -194,11 +194,11 @@ msgstr ""
 msgid "Failed to set zfs mountpoint"
 msgstr ""
 
-#: src/modules/mount/main.py:370
+#: src/modules/mount/main.py:365
 msgid "zfs mounting error"
 msgstr ""
 
-#: src/modules/networkcfg/main.py:30
+#: src/modules/networkcfg/main.py:29
 msgid "Saving network configuration."
 msgstr ""
 

src/modules/displaymanager/displaymanager.conf

@@ -65,14 +65,11 @@ sysconfigSetup: false
 # greetd has configurable user and group; the user and group is created if it
 # does not exist, and the user is set as default-session user.
 #
-# Some greeters for greetd (e.g gtkgreet or regreet) have support for a user's GTK CSS style to change appearance.
-#
 # lightdm has a list of greeters to look for, preferring them in order if
 # they are installed (if not, picks the alphabetically first greeter that is installed).
 #
 greetd:
   greeter_user: "tom_bombadil"
   greeter_group: "wheel"
-  greeter_css_location: "/etc/greetd/style.css"
 lightdm:
   preferred_greeters: ["lightdm-greeter.desktop", "slick-greeter.desktop"]

src/modules/displaymanager/displaymanager.schema.yaml

@@ -25,7 +25,6 @@ properties:
         properties:
             greeter_user: { type: string }
             greeter_group: { type: string }
-            greeter_css_location: { type: string }
         additionalProperties: false
     lightdm:
         type: object

src/modules/displaymanager/main.py

@@ -779,7 +779,6 @@ class DMgreetd(DisplayManager):
     executable = "greetd"
     greeter_user = "greeter"
     greeter_group = "greetd"
-    greeter_css_location = None
     config_data = {}
 
     def os_path(self, path):
@@ -847,8 +846,6 @@ class DMgreetd(DisplayManager):
         de_command = default_desktop_environment.executable
         if os.path.exists(self.os_path("usr/bin/gtkgreet")) and os.path.exists(self.os_path("usr/bin/cage")):
             self.config_data['default_session']['command'] = "cage -d -s -- gtkgreet"
-            if self.greeter_css_location:
-                self.config_data['default_session']['command'] += f" -s {self.greeter_css_location}"
         elif os.path.exists(self.os_path("usr/bin/tuigreet")):
             tuigreet_base_cmd = "tuigreet --remember --time --issue --asterisks --cmd "
             self.config_data['default_session']['command'] = tuigreet_base_cmd + de_command

src/modules/locale/Config.cpp

@@ -407,13 +407,15 @@ localeLabel( const QString& s )
 QString
 Config::currentLanguageStatus() const
 {
-    return tr( "The system language will be set to %1.", "@info" ).arg( localeLabel( m_selectedLocaleConfiguration.language() ) );
+    return tr( "The system language will be set to %1", "@info" )
+        .arg( localeLabel( m_selectedLocaleConfiguration.language() ) );
 }
 
 QString
 Config::currentLCStatus() const
 {
-    return tr( "The numbers and dates locale will be set to %1.", "@info" ).arg( localeLabel( m_selectedLocaleConfiguration.lc_numeric ) );
+    return tr( "The numbers and dates locale will be set to %1", "@info" )
+        .arg( localeLabel( m_selectedLocaleConfiguration.lc_numeric ) );
 }
 
 QString

src/modules/machineid/MachineIdJob.cpp

@@ -23,13 +23,13 @@
 
 #include <QFile>
 
-const NamedEnumTable< SystemdMachineIdStyle >&
+const NamedEnumTable< MachineId::SystemdMachineIdStyle >&
 styleNames()
 {
-    using T = SystemdMachineIdStyle;
+    using T = MachineId::SystemdMachineIdStyle;
     // *INDENT-OFF*
     // clang-format off
-    static const NamedEnumTable< SystemdMachineIdStyle > names {
+    static const NamedEnumTable< MachineId::SystemdMachineIdStyle > names {
         { QStringLiteral( "none" ), T::Blank },
         { QStringLiteral( "blank" ), T::Blank },
         { QStringLiteral( "uuid" ), T::Uuid },
@@ -101,8 +101,8 @@ MachineIdJob::exec()
                 QObject::tr( "Directory not found" ),
                 QObject::tr( "Could not create new random file <pre>%1</pre>." ).arg( entropy_file ) );
         }
-        auto r = createEntropy( m_entropy_copy ? EntropyGeneration::CopyFromHost
-                                                          : EntropyGeneration::New,
+        auto r = MachineId::createEntropy( m_entropy_copy ? MachineId::EntropyGeneration::CopyFromHost
+                                                          : MachineId::EntropyGeneration::New,
                                            root,
                                            entropy_file );
         if ( !r )
@@ -116,7 +116,7 @@ MachineIdJob::exec()
         {
             cWarning() << "Could not create systemd data-directory.";
         }
-        auto r = createSystemdMachineId( m_systemd_style, root, target_systemd_machineid_file );
+        auto r = MachineId::createSystemdMachineId( m_systemd_style, root, target_systemd_machineid_file );
         if ( !r )
         {
             return r;
@@ -130,7 +130,7 @@ MachineIdJob::exec()
         }
         if ( m_dbus_symlink && QFile::exists( root + target_systemd_machineid_file ) )
         {
-            auto r = createDBusLink( root, target_dbus_machineid_file, target_systemd_machineid_file );
+            auto r = MachineId::createDBusLink( root, target_dbus_machineid_file, target_systemd_machineid_file );
             if ( !r )
             {
                 return r;
@@ -138,7 +138,7 @@ MachineIdJob::exec()
         }
         else
         {
-            auto r = createDBusMachineId( root, target_dbus_machineid_file );
+            auto r = MachineId::createDBusMachineId( root, target_dbus_machineid_file );
             if ( !r )
             {
                 return r;
@@ -157,7 +157,7 @@ MachineIdJob::setConfigurationMap( const QVariantMap& map )
     const auto style = Calamares::getString( map, "systemd-style", QString() );
     if ( !style.isEmpty() )
     {
-        m_systemd_style = styleNames().find( style, SystemdMachineIdStyle::Uuid );
+        m_systemd_style = styleNames().find( style, MachineId::SystemdMachineIdStyle::Uuid );
     }
 
     m_dbus = Calamares::getBool( map, "dbus", false );
@@ -179,7 +179,7 @@ MachineIdJob::setConfigurationMap( const QVariantMap& map )
     m_entropy_files = Calamares::getStringList( map, "entropy-files" );
     if ( Calamares::getBool( map, "entropy", false ) )
     {
-        cWarning() << " configuration setting *entropy* is deprecated, use *entropy-files* instead.";
+        cWarning() << "MachineId:: configuration setting *entropy* is deprecated, use *entropy-files* instead.";
         m_entropy_files.append( QStringLiteral( "/var/lib/urandom/random-seed" ) );
     }
     m_entropy_files.removeDuplicates();

src/modules/machineid/MachineIdJob.h

@@ -48,7 +48,7 @@ public:
 private:
     bool m_systemd = false;  ///< write systemd's files
 
-    SystemdMachineIdStyle m_systemd_style = SystemdMachineIdStyle::Uuid;
+    MachineId::SystemdMachineIdStyle m_systemd_style = MachineId::SystemdMachineIdStyle::Uuid;
 
     bool m_dbus = false;  ///< write dbus files
     bool m_dbus_symlink = false;  ///< .. or just symlink to systemd

src/modules/machineid/Tests.cpp

@@ -127,18 +127,18 @@ MachineIdTests::testCopyFile()
     QVERIFY( source.exists() );
 
     // This should fail since "example" isn't standard in our test directory
-    auto r0 = copyFile( tempRoot.path(), "example" );
+    auto r0 = MachineId::copyFile( tempRoot.path(), "example" );
     QVERIFY( !r0 );
 
     const QString sampleFile = QStringLiteral( "CMakeCache.txt" );
     if ( QFile::exists( sampleFile ) )
     {
-        auto r1 = copyFile( tempRoot.path(), sampleFile );
+        auto r1 = MachineId::copyFile( tempRoot.path(), sampleFile );
         // Also fail, because it's not an absolute path
         QVERIFY( !r1 );
 
         QVERIFY( QFile::copy( sampleFile, tempISOdir.path() + '/' + sampleFile ) );
-        auto r2 = copyFile( tempRoot.path(), tempISOdir.path() + '/' + sampleFile );
+        auto r2 = MachineId::copyFile( tempRoot.path(), tempISOdir.path() + '/' + sampleFile );
         QVERIFY( r2 );
     }
 }

src/modules/machineid/Workers.cpp

@@ -12,8 +12,6 @@
 
 #include "Workers.h"
 
-#include "MachineIdJob.h"
-
 #include "utils/Entropy.h"
 #include "utils/Logger.h"
 #include "utils/System.h"
@@ -48,6 +46,9 @@ getUrandomPoolSize()
     return ( poolSize >= minimumPoolSize ) ? poolSize : minimumPoolSize;
 }
 
+namespace MachineId
+{
+
 static inline bool
 isAbsolutePath( const QString& fileName )
 {
@@ -60,19 +61,19 @@ copyFile( const QString& rootMountPoint, const QString& fileName )
     if ( !isAbsolutePath( fileName ) )
     {
         return Calamares::JobResult::internalError(
-            MachineIdJob::tr( "File not found" ),
-            MachineIdJob::tr( "Path <pre>%1</pre> must be an absolute path." ).arg( fileName ),
+            QObject::tr( "File not found" ),
+            QObject::tr( "Path <pre>%1</pre> must be an absolute path." ).arg( fileName ),
             0 );
     }
 
     QFile f( fileName );
     if ( !f.exists() )
     {
-        return Calamares::JobResult::error( MachineIdJob::tr( "File not found" ), fileName );
+        return Calamares::JobResult::error( QObject::tr( "File not found" ), fileName );
     }
     if ( !f.copy( rootMountPoint + fileName ) )
     {
-        return Calamares::JobResult::error( MachineIdJob::tr( "File not found" ), rootMountPoint + fileName );
+        return Calamares::JobResult::error( QObject::tr( "File not found" ), rootMountPoint + fileName );
     }
     return Calamares::JobResult::ok();
 }
@@ -89,8 +90,8 @@ createNewEntropy( int poolSize, const QString& rootMountPoint, const QString& fi
     if ( !entropyFile.open( QIODevice::WriteOnly ) )
     {
         return Calamares::JobResult::error(
-            MachineIdJob::tr( "File not found" ),
-            MachineIdJob::tr( "Could not create new random file <pre>%1</pre>." ).arg( fileName ) );
+            QObject::tr( "File not found" ),
+            QObject::tr( "Could not create new random file <pre>%1</pre>." ).arg( fileName ) );
     }
 
     QByteArray data;
@@ -189,3 +190,5 @@ createDBusLink( const QString& rootMountPoint, const QString& fileName, const QS
     Q_UNUSED( rootMountPoint )
     return runCmd( QStringList { QStringLiteral( "ln" ), QStringLiteral( "-sf" ), systemdFileName, fileName }, true );
 }
+
+}  // namespace MachineId

src/modules/machineid/Workers.h

@@ -7,11 +7,14 @@
  *
  */
 
-#ifndef MACHINEID_WORKERS_H
-#define MACHINEID_WORKERS_H
+#ifndef WORKERS_H
+#define WORKERS_H
 
 #include "Job.h"
 
+/// @brief Utility functions for doing the random-data stuff for MachineId
+namespace MachineId
+{
 /** @brief Utility functions
  *
  * These probably belong in libcalamares, since they're general utilities
@@ -67,4 +70,7 @@ enum class SystemdMachineIdStyle
 Calamares::JobResult
 createSystemdMachineId( SystemdMachineIdStyle style, const QString& rootMountPoint, const QString& fileName );
 
+
+}  // namespace MachineId
+
 #endif  // WORKERS_H

src/modules/packagechooserq/images/artix.png.license

@@ -0,0 +1,2 @@
+SPDX-FileCopyrightText: 2020 demmm <anke62@gmail.com>
+SPDX-License-Identifier: GPL-3.0-or-later

src/modules/packagechooserq/packagechooserq-qt6.qml

@@ -42,7 +42,7 @@ Item {
                     width: 450
                     height: 104
                     anchors.centerIn: parent
-                    text: qsTr("LibreOffice is a powerful and free office suite, used by millions of people around the world. It includes several applications that make it the most versatile Free and Open Source office suite on the market.<br/>
+                    text: qsTr("OpenRC base system.<br/>
                     Default option.")
                     font.pointSize: 10
                     anchors.verticalCenterOffset: -10
@@ -50,76 +50,14 @@ Item {
                     wrapMode: Text.WordWrap
                 }
 
-                Switch {
-                    id: element2
-                    x: 500
-                    y: 110
-                    width: 187
-                    height: 14
-                    text: qsTr("LibreOffice")
-                    checked: true
-                    hoverEnabled: true
-                    ButtonGroup.group: switchGroup
-
-                    indicator: Rectangle {
-                        implicitWidth: 40
-                        implicitHeight: 14
-                        radius: 10
-                        color: element2.checked ? "#3498db" : "#B9B9B9"
-                        border.color: element2.checked ? "#3498db" : "#cccccc"
-
-                        Rectangle {
-                            x: element2.checked ? parent.width - width : 0
-                            y: (parent.height - height) / 2
-                            width: 20
-                            height: 20
-                            radius: 10
-                            color: element2.down ? "#cccccc" : "#ffffff"
-                            border.color: element2.checked ? (element1.down ? "#3498db" : "#3498db") : "#999999"
-                        }
-                    }
-
-                    onCheckedChanged: {
-                        if ( checked ) {
-                            config.packageChoice = "libreoffice"
-                        }
-                    }
-                }
-
-                Image {
-                    id: image2
-                    x: 8
-                    y: 25
-                    height: 100
-                    fillMode: Image.PreserveAspectFit
-                    source: "images/libreoffice.jpg"
-                }
-            }
-
-            Rectangle {
-                width: 700
-                height: 150
-                radius: 10
-                border.width: 0
-                Text {
-                    width: 450
-                    height: 104
-                    anchors.centerIn: parent
-                    text: qsTr("If you don't want to install an office suite, just select No Office Suite. You can always add one (or more) later on your installed system as the need arrives.")
-                    font.pointSize: 10
-                    anchors.verticalCenterOffset: -10
-                    anchors.horizontalCenterOffset: 100
-                    wrapMode: Text.WordWrap
-                }
-
                 Switch {
                     id: element1
                     x: 500
                     y: 110
                     width: 187
                     height: 14
-                    text: qsTr("No Office Suite")
-                    checked: false
+                    text: qsTr("OpenRC")
+                    checked: true
                     hoverEnabled: true
                     ButtonGroup.group: switchGroup
 
@@ -143,18 +81,80 @@ Item {
 
                     onCheckedChanged: {
                         if ( checked ) {
-                            config.packageChoice = "no_office_suite"
+                            config.packageChoice = "elogind-openrc"
                         }
                     }
                 }
 
                 Image {
-                    id: image
+                    id: image1
                     x: 8
                     y: 25
                     height: 100
                     fillMode: Image.PreserveAspectFit
-                    source: "images/no-selection.png"
+                    source: "images/artix.png"
+                }
+            }
+
+            Rectangle {
+                width: 700
+                height: 150
+                radius: 10
+                border.width: 0
+                Text {
+                    width: 450
+                    height: 104
+                    anchors.centerIn: parent
+                    text: qsTr("Dinit base system.")
+                    font.pointSize: 10
+                    anchors.verticalCenterOffset: -10
+                    anchors.horizontalCenterOffset: 100
+                    wrapMode: Text.WordWrap
+                }
+
+                Switch {
+                    id: element2
+                    x: 500
+                    y: 110
+                    width: 187
+                    height: 14
+                    text: qsTr("Dinit")
+                    checked: false
+                    hoverEnabled: true
+                    ButtonGroup.group: switchGroup
+
+                    indicator: Rectangle {
+                        implicitWidth: 40
+                        implicitHeight: 14
+                        radius: 10
+                        color: element2.checked ? "#3498db" : "#B9B9B9"
+                        border.color: element2.checked ? "#3498db" : "#cccccc"
+
+                        Rectangle {
+                            x: element2.checked ? parent.width - width : 0
+                            y: (parent.height - height) / 2
+                            width: 20
+                            height: 20
+                            radius: 10
+                            color: element2.down ? "#cccccc" : "#ffffff"
+                            border.color: element2.checked ? (element2.down ? "#3498db" : "#3498db") : "#999999"
+                        }
+                    }
+
+                    onCheckedChanged: {
+                        if ( checked ) {
+                            config.packageChoice = "elogind-dinit"
+                        }
+                    }
+                }
+
+                Image {
+                    id: image2
+                    x: 8
+                    y: 25
+                    height: 100
+                    fillMode: Image.PreserveAspectFit
+                    source: "images/artix.png"
                 }
 
             }
@@ -169,7 +169,7 @@ Item {
                     width: 450
                     height: 104
                     anchors.centerIn: parent
-                    text: qsTr("Create a minimal Desktop install, remove all extra applications and decide later on what you would like to add to your system. Examples of what won't be on such an install, there will be no Office Suite, no media players, no image viewer or print support.  It will be just a desktop, file browser, package manager, text editor and simple web-browser.")
+                    text: qsTr("Runit base system.")
                     font.pointSize: 10
                     anchors.verticalCenterOffset: -10
                     anchors.horizontalCenterOffset: 100
@@ -182,7 +182,7 @@ Item {
                     y: 110
                     width: 187
                     height: 14
-                    text: qsTr("Minimal Install")
+                    text: qsTr("Runit")
                     checked: false
                     hoverEnabled: true
                     ButtonGroup.group: switchGroup
@@ -207,7 +207,7 @@ Item {
 
                     onCheckedChanged: {
                         if ( checked ) {
-                            config.packageChoice = "minimal_install"
+                            config.packageChoice = "elogind-runit"
                         }
                     }
                 }
@@ -218,7 +218,70 @@ Item {
                     y: 25
                     height: 100
                     fillMode: Image.PreserveAspectFit
-                    source: "images/plasma.png"
+                    source: "images/artix.png"
+                }
+            }
+
+            Rectangle {
+                width: 700
+                height: 150
+                color: "#ffffff"
+                radius: 10
+                border.width: 0
+                Text {
+                    width: 450
+                    height: 104
+                    anchors.centerIn: parent
+                    text: qsTr("S6 base system.")
+                    font.pointSize: 10
+                    anchors.verticalCenterOffset: -10
+                    anchors.horizontalCenterOffset: 100
+                    wrapMode: Text.WordWrap
+                }
+
+                Switch {
+                    id: element4
+                    x: 500
+                    y: 110
+                    width: 187
+                    height: 14
+                    text: qsTr("S6")
+                    checked: false
+                    hoverEnabled: true
+                    ButtonGroup.group: switchGroup
+
+                    indicator: Rectangle {
+                        implicitWidth: 40
+                        implicitHeight: 14
+                        radius: 10
+                        color: element4.checked ? "#3498db" : "#B9B9B9"
+                        border.color: element4.checked ? "#3498db" : "#cccccc"
+
+                        Rectangle {
+                            x: element4.checked ? parent.width - width : 0
+                            y: (parent.height - height) / 2
+                            width: 20
+                            height: 20
+                            radius: 10
+                            color: element4.down ? "#cccccc" : "#ffffff"
+                            border.color: element4.checked ? (element4.down ? "#3498db" : "#3498db") : "#999999"
+                        }
+                    }
+
+                    onCheckedChanged: {
+                        if ( checked ) {
+                            config.packageChoice = "elogind-s6"
+                        }
+                    }
+                }
+
+                Image {
+                    id: image4
+                    x: 8
+                    y: 25
+                    height: 100
+                    fillMode: Image.PreserveAspectFit
+                    source: "images/artix.png"
                 }
             }
 
@@ -230,7 +293,7 @@ Item {
                 Text {
                     height: 25
                     anchors.centerIn: parent
-                    text: qsTr("Please select an option for your install, or use the default: LibreOffice included.")
+                    text: qsTr("Please select an option for your install, or use the default: OpenRC.")
                     font.pointSize: 10
                     wrapMode: Text.WordWrap
                 }

src/modules/packagechooserq/packagechooserq-qt6.qrc

@@ -4,5 +4,6 @@
         <file>images/libreoffice.jpg</file>
         <file>images/no-selection.png</file>
         <file>images/plasma.png</file>
+        <file>images/artix.png</file>
     </qresource>
 </RCC>

src/modules/packagechooserq/packagechooserq.qml

@@ -42,7 +42,7 @@ Item {
                     width: 450
                     height: 104
                     anchors.centerIn: parent
-                    text: qsTr("LibreOffice is a powerful and free office suite, used by millions of people around the world. It includes several applications that make it the most versatile Free and Open Source office suite on the market.<br/>
+                    text: qsTr("OpenRC base system.<br/>
                     Default option.")
                     font.pointSize: 10
                     anchors.verticalCenterOffset: -10
@@ -50,76 +50,14 @@ Item {
                     wrapMode: Text.WordWrap
                 }
 
-                Switch {
-                    id: element2
-                    x: 500
-                    y: 110
-                    width: 187
-                    height: 14
-                    text: qsTr("LibreOffice")
-                    checked: true
-                    hoverEnabled: true
-                    ButtonGroup.group: switchGroup
-
-                    indicator: Rectangle {
-                        implicitWidth: 40
-                        implicitHeight: 14
-                        radius: 10
-                        color: element2.checked ? "#3498db" : "#B9B9B9"
-                        border.color: element2.checked ? "#3498db" : "#cccccc"
-
-                        Rectangle {
-                            x: element2.checked ? parent.width - width : 0
-                            y: (parent.height - height) / 2
-                            width: 20
-                            height: 20
-                            radius: 10
-                            color: element2.down ? "#cccccc" : "#ffffff"
-                            border.color: element2.checked ? (element1.down ? "#3498db" : "#3498db") : "#999999"
-                        }
-                    }
-
-                    onCheckedChanged: {
-                        if ( checked ) {
-                            config.packageChoice = "libreoffice"
-                        }
-                    }
-                }
-
-                Image {
-                    id: image2
-                    x: 8
-                    y: 25
-                    height: 100
-                    fillMode: Image.PreserveAspectFit
-                    source: "images/libreoffice.jpg"
-                }
-            }
-
-            Rectangle {
-                width: 700
-                height: 150
-                radius: 10
-                border.width: 0
-                Text {
-                    width: 450
-                    height: 104
-                    anchors.centerIn: parent
-                    text: qsTr("If you don't want to install an office suite, just select No Office Suite. You can always add one (or more) later on your installed system as the need arrives.")
-                    font.pointSize: 10
-                    anchors.verticalCenterOffset: -10
-                    anchors.horizontalCenterOffset: 100
-                    wrapMode: Text.WordWrap
-                }
-
                 Switch {
                     id: element1
                     x: 500
                     y: 110
                     width: 187
                     height: 14
-                    text: qsTr("No Office Suite")
-                    checked: false
+                    text: qsTr("OpenRC")
+                    checked: true
                     hoverEnabled: true
                     ButtonGroup.group: switchGroup
 
@@ -143,18 +81,80 @@ Item {
 
                     onCheckedChanged: {
                         if ( checked ) {
-                            config.packageChoice = "no_office_suite"
+                            config.packageChoice = "elogind-openrc"
                         }
                     }
                 }
 
                 Image {
-                    id: image
+                    id: image1
                     x: 8
                     y: 25
                     height: 100
                     fillMode: Image.PreserveAspectFit
-                    source: "images/no-selection.png"
+                    source: "images/artix.png"
+                }
+            }
+
+            Rectangle {
+                width: 700
+                height: 150
+                radius: 10
+                border.width: 0
+                Text {
+                    width: 450
+                    height: 104
+                    anchors.centerIn: parent
+                    text: qsTr("Dinit base system.")
+                    font.pointSize: 10
+                    anchors.verticalCenterOffset: -10
+                    anchors.horizontalCenterOffset: 100
+                    wrapMode: Text.WordWrap
+                }
+
+                Switch {
+                    id: element2
+                    x: 500
+                    y: 110
+                    width: 187
+                    height: 14
+                    text: qsTr("Dinit")
+                    checked: false
+                    hoverEnabled: true
+                    ButtonGroup.group: switchGroup
+
+                    indicator: Rectangle {
+                        implicitWidth: 40
+                        implicitHeight: 14
+                        radius: 10
+                        color: element2.checked ? "#3498db" : "#B9B9B9"
+                        border.color: element2.checked ? "#3498db" : "#cccccc"
+
+                        Rectangle {
+                            x: element2.checked ? parent.width - width : 0
+                            y: (parent.height - height) / 2
+                            width: 20
+                            height: 20
+                            radius: 10
+                            color: element2.down ? "#cccccc" : "#ffffff"
+                            border.color: element2.checked ? (element2.down ? "#3498db" : "#3498db") : "#999999"
+                        }
+                    }
+
+                    onCheckedChanged: {
+                        if ( checked ) {
+                            config.packageChoice = "elogind-dinit"
+                        }
+                    }
+                }
+
+                Image {
+                    id: image2
+                    x: 8
+                    y: 25
+                    height: 100
+                    fillMode: Image.PreserveAspectFit
+                    source: "images/artix.png"
                 }
 
             }
@@ -169,7 +169,7 @@ Item {
                     width: 450
                     height: 104
                     anchors.centerIn: parent
-                    text: qsTr("Create a minimal Desktop install, remove all extra applications and decide later on what you would like to add to your system. Examples of what won't be on such an install, there will be no Office Suite, no media players, no image viewer or print support.  It will be just a desktop, file browser, package manager, text editor and simple web-browser.")
+                    text: qsTr("Runit base system.")
                     font.pointSize: 10
                     anchors.verticalCenterOffset: -10
                     anchors.horizontalCenterOffset: 100
@@ -182,7 +182,7 @@ Item {
                     y: 110
                     width: 187
                     height: 14
-                    text: qsTr("Minimal Install")
+                    text: qsTr("Runit")
                     checked: false
                     hoverEnabled: true
                     ButtonGroup.group: switchGroup
@@ -207,7 +207,7 @@ Item {
 
                     onCheckedChanged: {
                         if ( checked ) {
-                            config.packageChoice = "minimal_install"
+                            config.packageChoice = "elogind-runit"
                         }
                     }
                 }
@@ -218,7 +218,70 @@ Item {
                     y: 25
                     height: 100
                     fillMode: Image.PreserveAspectFit
-                    source: "images/plasma.png"
+                    source: "images/artix.png"
+                }
+            }
+
+            Rectangle {
+                width: 700
+                height: 150
+                color: "#ffffff"
+                radius: 10
+                border.width: 0
+                Text {
+                    width: 450
+                    height: 104
+                    anchors.centerIn: parent
+                    text: qsTr("S6 base system.")
+                    font.pointSize: 10
+                    anchors.verticalCenterOffset: -10
+                    anchors.horizontalCenterOffset: 100
+                    wrapMode: Text.WordWrap
+                }
+
+                Switch {
+                    id: element4
+                    x: 500
+                    y: 110
+                    width: 187
+                    height: 14
+                    text: qsTr("S6")
+                    checked: false
+                    hoverEnabled: true
+                    ButtonGroup.group: switchGroup
+
+                    indicator: Rectangle {
+                        implicitWidth: 40
+                        implicitHeight: 14
+                        radius: 10
+                        color: element4.checked ? "#3498db" : "#B9B9B9"
+                        border.color: element4.checked ? "#3498db" : "#cccccc"
+
+                        Rectangle {
+                            x: element4.checked ? parent.width - width : 0
+                            y: (parent.height - height) / 2
+                            width: 20
+                            height: 20
+                            radius: 10
+                            color: element4.down ? "#cccccc" : "#ffffff"
+                            border.color: element4.checked ? (element4.down ? "#3498db" : "#3498db") : "#999999"
+                        }
+                    }
+
+                    onCheckedChanged: {
+                        if ( checked ) {
+                            config.packageChoice = "elogind-s6"
+                        }
+                    }
+                }
+
+                Image {
+                    id: image4
+                    x: 8
+                    y: 25
+                    height: 100
+                    fillMode: Image.PreserveAspectFit
+                    source: "images/artix.png"
                 }
             }
 
@@ -230,7 +293,7 @@ Item {
                 Text {
                     height: 25
                     anchors.centerIn: parent
-                    text: qsTr("Please select an option for your install, or use the default: LibreOffice included.")
+                    text: qsTr("Please select an option for your install, or use the default: OpenRC.")
                     font.pointSize: 10
                     wrapMode: Text.WordWrap
                 }

src/modules/packagechooserq/packagechooserq.qrc

@@ -4,5 +4,6 @@
         <file>images/libreoffice.jpg</file>
         <file>images/no-selection.png</file>
         <file>images/plasma.png</file>
+        <file>images/artix.png</file>
     </qresource>
 </RCC>

src/modules/partition/PartitionViewStep.cpp

@@ -53,7 +53,7 @@ PartitionViewStep::PartitionViewStep( QObject* parent )
     m_waitingWidget = new WaitingWidget( QString() );
     m_widget->addWidget( m_waitingWidget );
     CALAMARES_RETRANSLATE(
-        if ( m_waitingWidget ) { m_waitingWidget->setText( tr( "Gathering system information…", "@status" ) ); } );
+        if ( m_waitingWidget ) { m_waitingWidget->setText( tr( "Gathering system information..." ) ); } );
 
     m_core = new PartitionCoreModule( this );  // Unusable before init is complete!
     // We're not done loading, but we need the configuration map first.
@@ -104,7 +104,7 @@ PartitionViewStep::~PartitionViewStep()
 QString
 PartitionViewStep::prettyName() const
 {
-    return tr( "Partitions", "@label" );
+    return tr( "Partitions" );
 }
 
 /** @brief Gather the pretty descriptions of all the partitioning jobs
@@ -140,17 +140,17 @@ modeDescription( Config::InstallChoice choice )
     switch ( choice )
     {
     case Config::InstallChoice::Alongside:
-        return QCoreApplication::translate( context, "Install %1 <strong>alongside</strong> another operating system", "@label" )
+        return QCoreApplication::translate( context, "Install %1 <strong>alongside</strong> another operating system." )
             .arg( branding->shortVersionedName() );
     case Config::InstallChoice::Erase:
-        return QCoreApplication::translate( context, "<strong>Erase</strong> disk and install %1", "@label" )
+        return QCoreApplication::translate( context, "<strong>Erase</strong> disk and install %1." )
             .arg( branding->shortVersionedName() );
     case Config::InstallChoice::Replace:
-        return QCoreApplication::translate( context, "<strong>Replace</strong> a partition with %1", "@label" )
+        return QCoreApplication::translate( context, "<strong>Replace</strong> a partition with %1." )
             .arg( branding->shortVersionedName() );
     case Config::InstallChoice::NoChoice:
     case Config::InstallChoice::Manual:
-        return QCoreApplication::translate( context, "<strong>Manual</strong> partitioning", "@label" );
+        return QCoreApplication::translate( context, "<strong>Manual</strong> partitioning." );
     }
     return QString();
 }
@@ -176,26 +176,26 @@ diskDescription( int listLength, const PartitionCoreModule::SummaryInfo& info, C
             return QCoreApplication::translate(
                        context,
                        "Install %1 <strong>alongside</strong> another operating system on disk "
-                       "<strong>%2</strong> (%3)", "@info" )
+                       "<strong>%2</strong> (%3)." )
                 .arg( branding->shortVersionedName() )
                 .arg( info.deviceNode )
                 .arg( info.deviceName );
         case Config::Erase:
             return QCoreApplication::translate( context,
-                                                "<strong>Erase</strong> disk <strong>%2</strong> (%3) and install %1", "@info" )
+                                                "<strong>Erase</strong> disk <strong>%2</strong> (%3) and install %1." )
                 .arg( branding->shortVersionedName() )
                 .arg( info.deviceNode )
                 .arg( info.deviceName );
         case Config::Replace:
             return QCoreApplication::translate(
-                       context, "<strong>Replace</strong> a partition on disk <strong>%2</strong> (%3) with %1", "@info" )
+                       context, "<strong>Replace</strong> a partition on disk <strong>%2</strong> (%3) with %1." )
                 .arg( branding->shortVersionedName() )
                 .arg( info.deviceNode )
                 .arg( info.deviceName );
         case Config::NoChoice:
         case Config::Manual:
             return QCoreApplication::translate(
-                       context, "<strong>Manual</strong> partitioning on disk <strong>%1</strong> (%2)", "@info" )
+                       context, "<strong>Manual</strong> partitioning on disk <strong>%1</strong> (%2)." )
                 .arg( info.deviceNode )
                 .arg( info.deviceName );
         }
@@ -203,7 +203,7 @@ diskDescription( int listLength, const PartitionCoreModule::SummaryInfo& info, C
     }
     else  // multiple disk previews!
     {
-        return QCoreApplication::translate( context, "Disk <strong>%1</strong> (%2)", "@info" )
+        return QCoreApplication::translate( context, "Disk <strong>%1</strong> (%2)" )
             .arg( info.deviceNode )
             .arg( info.deviceName );
     }
@@ -293,7 +293,7 @@ PartitionViewStep::createSummaryWidget() const
         field->setSpacing( 6 );
         field->addWidget( preview );
         field->addWidget( previewLabels );
-        formLayout->addRow( tr( "Current:", "@label" ), field );
+        formLayout->addRow( tr( "Current:" ), field );
 
         preview = new PartitionBarsView;
         preview->setNestedPartitionsMode( mode );
@@ -311,7 +311,7 @@ PartitionViewStep::createSummaryWidget() const
         field->setSpacing( 6 );
         field->addWidget( preview );
         field->addWidget( previewLabels );
-        formLayout->addRow( tr( "After:", "@label" ), field );
+        formLayout->addRow( tr( "After:" ), field );
     }
     const QStringList jobsLines = jobDescriptions( jobs() );
     if ( !jobsLines.isEmpty() )

src/modules/partition/core/BootLoaderModel.cpp

@@ -57,7 +57,7 @@ BootLoaderModel::createMbrItems()
 {
     for ( auto device : m_devices )
     {
-        QString text = tr( "Master Boot Record of %1", "@info" ).arg( device->name() );
+        QString text = tr( "Master Boot Record of %1" ).arg( device->name() );
         appendRow( createBootLoaderItem( text, device->deviceNode(), false ) );
     }
 }
@@ -90,14 +90,14 @@ BootLoaderModel::updateInternal()
     Partition* partition = KPMHelpers::findPartitionByMountPoint( m_devices, "/boot" );
     if ( partition )
     {
-        partitionText = tr( "Boot Partition", "@info" );
+        partitionText = tr( "Boot Partition" );
     }
     else
     {
         partition = KPMHelpers::findPartitionByMountPoint( m_devices, "/" );
         if ( partition )
         {
-            partitionText = tr( "System Partition", "@info" );
+            partitionText = tr( "System Partition" );
         }
     }
 
@@ -128,7 +128,7 @@ BootLoaderModel::updateInternal()
     }
     // Create "don't install bootloader" item. This is always available,
     // also if there was no /boot or / partition found.
-    appendRow( createBootLoaderItem( tr( "Do not install a boot loader", "@label" ), QString(), false ) );
+    appendRow( createBootLoaderItem( tr( "Do not install a boot loader" ), QString(), false ) );
 }
 
 

src/modules/partition/core/PartitionModel.cpp

@@ -154,11 +154,11 @@ PartitionModel::data( const QModelIndex& index, int role ) const
         {
             if ( isPartitionFreeSpace( partition ) )
             {
-                return tr( "Free Space", "@title" );
+                return tr( "Free Space" );
             }
             else
             {
-                return isPartitionNew( partition ) ? tr( "New Partition", "@title" ) : partition->partitionPath();
+                return isPartitionNew( partition ) ? tr( "New partition" ) : partition->partitionPath();
             }
         }
         if ( col == FileSystemColumn )
@@ -198,11 +198,11 @@ PartitionModel::data( const QModelIndex& index, int role ) const
         {
             if ( isPartitionFreeSpace( partition ) )
             {
-                name = tr( "Free Space", "@title );
+                name = tr( "Free Space" );
             }
             else
             {
-                name = isPartitionNew( partition ) ? tr( "New Partition", "@title" ) : partition->partitionPath();
+                name = isPartitionNew( partition ) ? tr( "New partition" ) : partition->partitionPath();
             }
         }
         QString prettyFileSystem = Calamares::Partition::prettyNameForFileSystemType( partition->fileSystem().type() );
@@ -304,15 +304,15 @@ PartitionModel::headerData( int section, Qt::Orientation, int role ) const
     switch ( section )
     {
     case NameColumn:
-        return tr( "Name", "@title" );
+        return tr( "Name" );
     case FileSystemColumn:
-        return tr( "File System", "@title" );
+        return tr( "File System" );
     case FileSystemLabelColumn:
-        return tr( "File System Label", "@title" );
+        return tr( "File System Label" );
     case MountPointColumn:
-        return tr( "Mount Point", "@title" );
+        return tr( "Mount Point" );
     case SizeColumn:
-        return tr( "Size", "@title" );
+        return tr( "Size" );
     default:
         cDebug() << "Unknown column" << section;
         return QVariant();

src/modules/partition/gui/ChoicePage.cpp

@@ -134,9 +134,9 @@ void
 ChoicePage::retranslate()
 {
     retranslateUi( this );
-    m_drivesLabel->setText( tr( "Select storage de&vice:", "@label" ) );
-    m_previewBeforeLabel->setText( tr( "Current:", "@label" ) );
-    m_previewAfterLabel->setText( tr( "After:", "@label" ) );
+    m_drivesLabel->setText( tr( "Select storage de&vice:" ) );
+    m_previewBeforeLabel->setText( tr( "Current:" ) );
+    m_previewAfterLabel->setText( tr( "After:" ) );
 
     updateSwapChoicesTr();
     updateChoiceButtonsTr();
@@ -893,7 +893,7 @@ ChoicePage::doReplaceSelectedPartition( const QModelIndex& current )
             m_reuseHomeCheckBox->setVisible( !homePartitionPath->isEmpty() );
             if ( !homePartitionPath->isEmpty() )
             {
-                m_reuseHomeCheckBox->setText( tr( "Reuse %1 as home partition for %2", "@label" )
+                m_reuseHomeCheckBox->setText( tr( "Reuse %1 as home partition for %2." )
                                                   .arg( *homePartitionPath )
                                                   .arg( Calamares::Branding::instance()->shortProductName() ) );
             }
@@ -1031,7 +1031,7 @@ ChoicePage::updateActionChoicePreview( InstallChoice choice )
         {
             m_encryptWidget->show();
         }
-        m_previewBeforeLabel->setText( tr( "Current:", "@label" ) );
+        m_previewBeforeLabel->setText( tr( "Current:" ) );
         m_selectLabel->setText( tr( "<strong>Select a partition to shrink, "
                                     "then drag the bottom bar to resize</strong>" ) );
         m_selectLabel->show();
@@ -1057,7 +1057,7 @@ ChoicePage::updateActionChoicePreview( InstallChoice choice )
                      Q_UNUSED( path )
                      sizeLabel->setText(
                          tr( "%1 will be shrunk to %2MiB and a new "
-                             "%3MiB partition will be created for %4.", "@info, %1 is partition name, %4 is product name" )
+                             "%3MiB partition will be created for %4." )
                              .arg( m_beforePartitionBarsView->selectionModel()->currentIndex().data().toString() )
                              .arg( Calamares::BytesToMiB( size ) )
                              .arg( Calamares::BytesToMiB( sizeNext ) )
@@ -1082,7 +1082,7 @@ ChoicePage::updateActionChoicePreview( InstallChoice choice )
     case InstallChoice::Replace:
     {
         m_encryptWidget->setVisible( shouldShowEncryptWidget( choice ) );
-        m_previewBeforeLabel->setText( tr( "Current:", "@label" ) );
+        m_previewBeforeLabel->setText( tr( "Current:" ) );
         m_afterPartitionBarsView = new PartitionBarsView( m_previewAfterFrame );
         m_afterPartitionBarsView->setNestedPartitionsMode( mode );
         m_afterPartitionLabelsView = new PartitionLabelsView( m_previewAfterFrame );
@@ -1126,7 +1126,7 @@ ChoicePage::updateActionChoicePreview( InstallChoice choice )
             m_beforePartitionLabelsView->setSelectionFilter( filter );
 
             m_selectLabel->show();
-            m_selectLabel->setText( tr( "<strong>Select a partition to install on</strong>", "@label" ) );
+            m_selectLabel->setText( tr( "<strong>Select a partition to install on</strong>" ) );
         }
 
         break;
@@ -1135,7 +1135,7 @@ ChoicePage::updateActionChoicePreview( InstallChoice choice )
     case InstallChoice::Manual:
         m_selectLabel->hide();
         m_previewAfterFrame->hide();
-        m_previewBeforeLabel->setText( tr( "Current:", "@label" ) );
+        m_previewBeforeLabel->setText( tr( "Current:" ) );
         m_previewAfterLabel->hide();
         m_encryptWidget->hide();
         break;
@@ -1188,21 +1188,21 @@ ChoicePage::setupEfiSystemPartitionSelector()
     {
         m_efiLabel->setText( tr( "An EFI system partition cannot be found anywhere "
                                  "on this system. Please go back and use manual "
-                                 "partitioning to set up %1.", "@info, %1 is product name" )
+                                 "partitioning to set up %1." )
                                  .arg( Calamares::Branding::instance()->shortProductName() ) );
         updateNextEnabled();
     }
     else if ( efiSystemPartitions.count() == 1 )  //probably most usual situation
     {
         m_efiLabel->setText( tr( "The EFI system partition at %1 will be used for "
-                                 "starting %2.", "@info, %1 is partition path, %2 is product name" )
+                                 "starting %2." )
                                  .arg( efiSystemPartitions.first()->partitionPath() )
                                  .arg( Calamares::Branding::instance()->shortProductName() ) );
     }
     else
     {
         m_efiComboBox->show();
-        m_efiLabel->setText( tr( "EFI system partition:", "@label" ) );
+        m_efiLabel->setText( tr( "EFI system partition:" ) );
         for ( int i = 0; i < efiSystemPartitions.count(); ++i )
         {
             Partition* efiPartition = efiSystemPartitions.at( i );
@@ -1505,12 +1505,12 @@ ChoicePage::setupActions()
     {
         if ( atLeastOneIsMounted )
         {
-            m_messageLabel->setText( tr( "This storage device has one of its partitions <strong>mounted</strong>.", "@info" ) );
+            m_messageLabel->setText( tr( "This storage device has one of its partitions <strong>mounted</strong>." ) );
         }
         else
         {
             m_messageLabel->setText(
-                tr( "This storage device is a part of an <strong>inactive RAID</strong> device.", "@info" ) );
+                tr( "This storage device is a part of an <strong>inactive RAID</strong> device." ) );
         }
 
         m_messageLabel->show();
@@ -1625,7 +1625,7 @@ ChoicePage::updateSwapChoicesTr()
             // toInt() returns 0 on failure, so check for ok
             if ( ok )  // It was explicitly set to 0
             {
-                m_eraseSwapChoiceComboBox->setItemText( index, tr( "No swap", "@label" ) );
+                m_eraseSwapChoiceComboBox->setItemText( index, tr( "No Swap" ) );
             }
             else
             {
@@ -1634,16 +1634,16 @@ ChoicePage::updateSwapChoicesTr()
             }
             break;
         case SwapChoice::ReuseSwap:
-            m_eraseSwapChoiceComboBox->setItemText( index, tr( "Reuse swap", "@label" ) );
+            m_eraseSwapChoiceComboBox->setItemText( index, tr( "Reuse Swap" ) );
             break;
         case SwapChoice::SmallSwap:
-            m_eraseSwapChoiceComboBox->setItemText( index, tr( "Swap (no Hibernate)", "@label" ) );
+            m_eraseSwapChoiceComboBox->setItemText( index, tr( "Swap (no Hibernate)" ) );
             break;
         case SwapChoice::FullSwap:
-            m_eraseSwapChoiceComboBox->setItemText( index, tr( "Swap (with Hibernate)", "@label" ) );
+            m_eraseSwapChoiceComboBox->setItemText( index, tr( "Swap (with Hibernate)" ) );
             break;
         case SwapChoice::SwapFile:
-            m_eraseSwapChoiceComboBox->setItemText( index, tr( "Swap to file", "@label" ) );
+            m_eraseSwapChoiceComboBox->setItemText( index, tr( "Swap to file" ) );
             break;
         default:
             cWarning() << "Box item" << index << m_eraseSwapChoiceComboBox->itemText( index ) << "has role" << value;
@@ -1684,7 +1684,7 @@ ChoicePage::createBootloaderPanel()
     mainLayout->setContentsMargins( 0, 0, 0, 0 );
     QLabel* widgetLabel = new QLabel( panelWidget );
     mainLayout->addWidget( widgetLabel );
-    widgetLabel->setText( tr( "Bootloader location:", "@label" ) );
+    widgetLabel->setText( tr( "Boot loader location:" ) );
 
     QComboBox* comboForBootloader = new QComboBox( panelWidget );
     comboForBootloader->setModel( m_core->bootLoaderModel() );

src/modules/partition/gui/CreatePartitionDialog.cpp

@@ -64,7 +64,7 @@ CreatePartitionDialog::CreatePartitionDialog( Device* device,
     , m_usedMountPoints( usedMountPoints )
 {
     m_ui->setupUi( this );
-    m_ui->encryptWidget->setText( tr( "En&crypt", "@action" ) );
+    m_ui->encryptWidget->setText( tr( "En&crypt" ) );
     m_ui->encryptWidget->hide();
 
     if ( m_device->type() != Device::Type::LVM_Device )
@@ -192,12 +192,12 @@ CreatePartitionDialog::initMbrPartitionTypeUi()
     if ( !parentIsPartitionTable )
     {
         m_role = PartitionRole( PartitionRole::Logical );
-        fixedPartitionString = tr( "Logical", "@label" );
+        fixedPartitionString = tr( "Logical" );
     }
     else if ( m_device->partitionTable()->hasExtended() )
     {
         m_role = PartitionRole( PartitionRole::Primary );
-        fixedPartitionString = tr( "Primary", "@label" );
+        fixedPartitionString = tr( "Primary" );
     }
 
     if ( fixedPartitionString.isEmpty() )
@@ -216,7 +216,7 @@ void
 CreatePartitionDialog::initGptPartitionTypeUi()
 {
     m_role = PartitionRole( PartitionRole::Primary );
-    m_ui->fixedPartitionLabel->setText( tr( "GPT", "@label" ) );
+    m_ui->fixedPartitionLabel->setText( tr( "GPT" ) );
     m_ui->primaryRadioButton->hide();
     m_ui->extendedRadioButton->hide();
 }

src/modules/partition/gui/CreateVolumeGroupDialog.cpp

@@ -25,7 +25,7 @@ CreateVolumeGroupDialog::CreateVolumeGroupDialog( QString& vgName,
     , m_selectedPVs( selectedPVs )
     , m_peSize( pSize )
 {
-    setWindowTitle( tr( "Create Volume Group", "@title" ) );
+    setWindowTitle( tr( "Create Volume Group" ) );
 
     peSize()->setValue( pSize );
 

src/modules/partition/gui/EncryptWidget.cpp

@@ -150,12 +150,12 @@ EncryptWidget::updateState( const bool notify )
         if ( p1.isEmpty() && p2.isEmpty() )
         {
             applyPixmap( m_ui->m_iconLabel, Calamares::StatusWarning );
-            m_ui->m_iconLabel->setToolTip( tr( "Please enter the same passphrase in both boxes.", "@tooltip" ) );
+            m_ui->m_iconLabel->setToolTip( tr( "Please enter the same passphrase in both boxes." ) );
         }
         else if ( m_filesystem == FileSystem::Zfs && p1.length() < ZFS_MIN_LENGTH )
         {
             applyPixmap( m_ui->m_iconLabel, Calamares::StatusError );
-            m_ui->m_iconLabel->setToolTip( tr( "Password must be a minimum of %1 characters.", "@tooltip" ).arg( ZFS_MIN_LENGTH ) );
+            m_ui->m_iconLabel->setToolTip( tr( "Password must be a minimum of %1 characters" ).arg( ZFS_MIN_LENGTH ) );
         }
         else if ( p1 == p2 )
         {
@@ -165,7 +165,7 @@ EncryptWidget::updateState( const bool notify )
         else
         {
             applyPixmap( m_ui->m_iconLabel, Calamares::StatusError );
-            m_ui->m_iconLabel->setToolTip( tr( "Please enter the same passphrase in both boxes.", "@tooltip" ) );
+            m_ui->m_iconLabel->setToolTip( tr( "Please enter the same passphrase in both boxes." ) );
         }
     }
 

src/modules/partition/gui/PartitionDialogHelpers.cpp

@@ -88,12 +88,12 @@ validateMountPoint( const QString& mountPoint, const QStringList& inUse, QLabel*
 
     if ( inUse.contains( mountPoint ) )
     {
-        msg = CreatePartitionDialog::tr( "Mountpoint already in use. Please select another one.", "@info" );
+        msg = CreatePartitionDialog::tr( "Mountpoint already in use. Please select another one." );
         ok = false;
     }
     else if ( !mountPoint.isEmpty() && !mountPoint.startsWith( '/' ) )
     {
-        msg = CreatePartitionDialog::tr( "Mountpoint must start with a <tt>/</tt>.", "@info" );
+        msg = CreatePartitionDialog::tr( "Mountpoint must start with a <tt>/</tt>." );
         ok = false;
     }
 

src/modules/partition/gui/PartitionLabelsView.cpp

@@ -36,7 +36,7 @@ static const int CORNER_RADIUS = 2;
 static QStringList
 buildUnknownDisklabelTexts( Device* dev )
 {
-    QStringList texts = { QObject::tr( "Unpartitioned space or unknown partition table", "@info" ),
+    QStringList texts = { QObject::tr( "Unpartitioned space or unknown partition table" ),
                           formatByteSize( dev->totalLogical() * dev->logicalSize() ) };
     return texts;
 }
@@ -179,28 +179,28 @@ PartitionLabelsView::buildTexts( const QModelIndex& index ) const
             }
             else if ( mountPoint == "/home" )
             {
-                firstLine = tr( "Home", "@label" );
+                firstLine = tr( "Home" );
             }
             else if ( mountPoint == "/boot" )
             {
-                firstLine = tr( "Boot", "@label" );
+                firstLine = tr( "Boot" );
             }
             else if ( mountPoint.contains( "/efi" )
                       && index.data( PartitionModel::FileSystemTypeRole ).toInt() == FileSystem::Fat32 )
             {
-                firstLine = tr( "EFI system", "@label" );
+                firstLine = tr( "EFI system" );
             }
             else if ( index.data( PartitionModel::FileSystemTypeRole ).toInt() == FileSystem::LinuxSwap )
             {
-                firstLine = tr( "Swap", "@label" );
+                firstLine = tr( "Swap" );
             }
             else if ( !mountPoint.isEmpty() )
             {
-                firstLine = tr( "New partition for %1", "@label" ).arg( mountPoint );
+                firstLine = tr( "New partition for %1" ).arg( mountPoint );
             }
             else
             {
-                firstLine = tr( "New partition", "@label" );
+                firstLine = tr( "New partition" );
             }
         }
     }

src/modules/partition/gui/ResizeVolumeGroupDialog.cpp

@@ -27,7 +27,7 @@ ResizeVolumeGroupDialog::ResizeVolumeGroupDialog( LvmDevice* device,
     : VolumeGroupBaseDialog( device->name(), device->physicalVolumes(), parent )
     , m_selectedPVs( selectedPVs )
 {
-    setWindowTitle( tr( "Resize Volume Group", "@title" ) );
+    setWindowTitle( tr( "Resize Volume Group" ) );
 
     for ( int i = 0; i < pvList()->count(); i++ )
     {

src/modules/partition/gui/ScanningDialog.cpp

@@ -65,7 +65,7 @@ ScanningDialog::run( const QFuture< void >& future,
 void
 ScanningDialog::run( const QFuture< void >& future, const std::function< void() >& callback, QWidget* parent )
 {
-    ScanningDialog::run( future, tr( "Scanning storage devices…", "@status" ), tr( "Partitioning…", "@status" ), callback, parent );
+    ScanningDialog::run( future, tr( "Scanning storage devices..." ), tr( "Partitioning" ), callback, parent );
 }
 
 void

src/modules/partition/jobs/AutoMountManagementJob.cpp

@@ -19,7 +19,7 @@ AutoMountManagementJob::AutoMountManagementJob( bool disable )
 QString
 AutoMountManagementJob::prettyName() const
 {
-    return tr( "Managing auto-mount settings…", "@status" );
+    return tr( "Manage auto-mount settings" );
 }
 
 Calamares::JobResult

src/modules/partition/jobs/ChangeFilesystemLabelJob.cpp

@@ -31,14 +31,15 @@ ChangeFilesystemLabelJob::ChangeFilesystemLabelJob( Device* device, Partition* p
 QString
 ChangeFilesystemLabelJob::prettyName() const
 {
-    return tr( "Set filesystem label on %1", "@title" ).arg( partition()->partitionPath() );
+    return tr( "Set filesystem label on %1." ).arg( partition()->partitionPath() );
 }
 
 
 QString
 ChangeFilesystemLabelJob::prettyDescription() const
 {
-    return tr( "Set filesystem label <strong>%1</strong> to partition <strong>%2</strong>", "@info" )
+    return tr( "Set filesystem label <strong>%1</strong> to partition "
+               "<strong>%2</strong>." )
         .arg( m_label )
         .arg( partition()->partitionPath() );
 }
@@ -47,9 +48,7 @@ ChangeFilesystemLabelJob::prettyDescription() const
 QString
 ChangeFilesystemLabelJob::prettyStatusMessage() const
 {
-    return tr( "Setting filesystem label <strong>%1</strong> to partition <strong>%2</strong>…", "@status" )
-        .arg( m_label )
-        .arg( partition()->partitionPath() );
+    return prettyDescription();
 }
 
 
@@ -69,7 +68,7 @@ ChangeFilesystemLabelJob::exec()
             return Calamares::JobResult::ok();
         }
         return Calamares::JobResult::error(
-            tr( "The installer failed to update partition table on disk '%1'.", "@info" ).arg( m_device->name() ) );
+            tr( "The installer failed to update partition table on disk '%1'." ).arg( m_device->name() ) );
     }
 
     Report report( nullptr );
@@ -81,6 +80,5 @@ ChangeFilesystemLabelJob::exec()
         return Calamares::JobResult::ok();
     }
     return Calamares::JobResult::error(
-        tr( "The installer failed to update partition table on disk '%1'.", "@info" ).arg( m_device->name() ),
-        report.toText() );
+        tr( "The installer failed to update partition table on disk '%1'." ).arg( m_device->name() ), report.toText() );
 }

src/modules/partition/jobs/ClearMountsJob.cpp

@@ -368,13 +368,13 @@ ClearMountsJob::ClearMountsJob( Device* device )
 QString
 ClearMountsJob::prettyName() const
 {
-    return tr( "Clear mounts for partitioning operations on %1", "@title" ).arg( m_deviceNode );
+    return tr( "Clear mounts for partitioning operations on %1" ).arg( m_deviceNode );
 }
 
 QString
 ClearMountsJob::prettyStatusMessage() const
 {
-    return tr( "Clearing mounts for partitioning operations on %1…", "@status" ).arg( m_deviceNode );
+    return tr( "Clearing mounts for partitioning operations on %1." ).arg( m_deviceNode );
 }
 
 Calamares::JobResult

src/modules/partition/jobs/ClearTempMountsJob.cpp

@@ -30,14 +30,14 @@ ClearTempMountsJob::ClearTempMountsJob()
 QString
 ClearTempMountsJob::prettyName() const
 {
-    return tr( "Clearing all temporary mounts…", "@status" );
+    return tr( "Clear all temporary mounts." );
 }
 
 
 QString
 ClearTempMountsJob::prettyStatusMessage() const
 {
-    return tr( "Clearing all temporary mounts…", "@status" );
+    return tr( "Clearing all temporary mounts." );
 }
 
 

src/modules/partition/jobs/CreatePartitionJob.cpp

@@ -178,7 +178,7 @@ CreatePartitionJob::prettyName() const
         QString entries = prettyGptEntries( m_partition );
         if ( !entries.isEmpty() )
         {
-            return tr( "Create new %1MiB partition on %3 (%2) with entries %4", "@title" )
+            return tr( "Create new %1MiB partition on %3 (%2) with entries %4." )
                 .arg( Calamares::BytesToMiB( m_partition->capacity() ) )
                 .arg( m_device->name() )
                 .arg( m_device->deviceNode() )
@@ -186,14 +186,14 @@ CreatePartitionJob::prettyName() const
         }
         else
         {
-            return tr( "Create new %1MiB partition on %3 (%2)", "@title" )
+            return tr( "Create new %1MiB partition on %3 (%2)." )
                 .arg( Calamares::BytesToMiB( m_partition->capacity() ) )
                 .arg( m_device->name() )
                 .arg( m_device->deviceNode() );
         }
     }
 
-    return tr( "Create new %2MiB partition on %4 (%3) with file system %1", "@title" )
+    return tr( "Create new %2MiB partition on %4 (%3) with file system %1." )
         .arg( userVisibleFS( m_partition->fileSystem() ) )
         .arg( Calamares::BytesToMiB( m_partition->capacity() ) )
         .arg( m_device->name() )
@@ -210,8 +210,7 @@ CreatePartitionJob::prettyDescription() const
         if ( !entries.isEmpty() )
         {
             return tr( "Create new <strong>%1MiB</strong> partition on <strong>%3</strong> (%2) with entries "
-                       "<em>%4</em>",
-                       "@info" )
+                       "<em>%4</em>." )
                 .arg( Calamares::BytesToMiB( m_partition->capacity() ) )
                 .arg( m_device->name() )
                 .arg( m_device->deviceNode() )
@@ -219,7 +218,7 @@ CreatePartitionJob::prettyDescription() const
         }
         else
         {
-            return tr( "Create new <strong>%1MiB</strong> partition on <strong>%3</strong> (%2)", "@info" )
+            return tr( "Create new <strong>%1MiB</strong> partition on <strong>%3</strong> (%2)." )
                 .arg( Calamares::BytesToMiB( m_partition->capacity() ) )
                 .arg( m_device->name() )
                 .arg( m_device->deviceNode() );
@@ -227,8 +226,7 @@ CreatePartitionJob::prettyDescription() const
     }
 
     return tr( "Create new <strong>%2MiB</strong> partition on <strong>%4</strong> "
-               "(%3) with file system <strong>%1</strong>",
-               "@info" )
+               "(%3) with file system <strong>%1</strong>." )
         .arg( userVisibleFS( m_partition->fileSystem() ) )
         .arg( Calamares::BytesToMiB( m_partition->capacity() ) )
         .arg( m_device->name() )
@@ -251,10 +249,10 @@ CreatePartitionJob::prettyStatusMessage() const
             type = userVisibleFS( m_partition->fileSystem() );
         }
 
-        return tr( "Creating new %1 partition on %2…", "@status" ).arg( type ).arg( m_device->deviceNode() );
+        return tr( "Creating new %1 partition on %2." ).arg( type ).arg( m_device->deviceNode() );
     }
 
-    return tr( "Creating new %1 partition on %2…", "@status" )
+    return tr( "Creating new %1 partition on %2." )
         .arg( userVisibleFS( m_partition->fileSystem() ) )
         .arg( m_device->deviceNode() );
 }
@@ -271,7 +269,7 @@ CreatePartitionJob::exec()
 
     return KPMHelpers::execute(
         NewOperation( *m_device, m_partition ),
-        tr( "The installer failed to create partition on disk '%1'.", "@info" ).arg( m_device->name() ) );
+        tr( "The installer failed to create partition on disk '%1'." ).arg( m_device->name() ) );
 }
 
 void

src/modules/partition/jobs/CreatePartitionTableJob.cpp

@@ -38,7 +38,7 @@ CreatePartitionTableJob::CreatePartitionTableJob( Device* device, PartitionTable
 QString
 CreatePartitionTableJob::prettyName() const
 {
-    return tr( "Creating new %1 partition table on %2…", "@status" )
+    return tr( "Create new %1 partition table on %2." )
         .arg( PartitionTable::tableTypeToName( m_type ) )
         .arg( m_device->deviceNode() );
 }
@@ -46,7 +46,7 @@ CreatePartitionTableJob::prettyName() const
 QString
 CreatePartitionTableJob::prettyDescription() const
 {
-    return tr( "Creating new <strong>%1</strong> partition table on <strong>%2</strong> (%3)…", "@status" )
+    return tr( "Create new <strong>%1</strong> partition table on <strong>%2</strong> (%3)." )
         .arg( PartitionTable::tableTypeToName( m_type ).toUpper() )
         .arg( m_device->deviceNode() )
         .arg( m_device->name() );
@@ -55,7 +55,7 @@ CreatePartitionTableJob::prettyDescription() const
 QString
 CreatePartitionTableJob::prettyStatusMessage() const
 {
-    return tr( "Creating new %1 partition table on %2…", "@status" )
+    return tr( "Creating new %1 partition table on %2." )
         .arg( PartitionTable::tableTypeToName( m_type ).toUpper() )
         .arg( m_device->deviceNode() );
 }

src/modules/partition/jobs/CreateVolumeGroupJob.cpp

@@ -29,19 +29,19 @@ CreateVolumeGroupJob::CreateVolumeGroupJob( Device*,
 QString
 CreateVolumeGroupJob::prettyName() const
 {
-    return tr( "Creating new volume group named %1…", "@status" ).arg( m_vgName );
+    return tr( "Create new volume group named %1." ).arg( m_vgName );
 }
 
 QString
 CreateVolumeGroupJob::prettyDescription() const
 {
-    return tr( "Creating new volume group named <strong>%1</strong>…", "@status" ).arg( m_vgName );
+    return tr( "Create new volume group named <strong>%1</strong>." ).arg( m_vgName );
 }
 
 QString
 CreateVolumeGroupJob::prettyStatusMessage() const
 {
-    return tr( "Creating new volume group named %1…", "@status" ).arg( m_vgName );
+    return tr( "Creating new volume group named %1." ).arg( m_vgName );
 }
 
 Calamares::JobResult

src/modules/partition/jobs/DeactivateVolumeGroupJob.cpp

@@ -23,19 +23,19 @@ DeactivateVolumeGroupJob::DeactivateVolumeGroupJob( LvmDevice* device )
 QString
 DeactivateVolumeGroupJob::prettyName() const
 {
-    return tr( "Deactivating volume group named %1…", "@status" ).arg( m_device->name() );
+    return tr( "Deactivate volume group named %1." ).arg( m_device->name() );
 }
 
 QString
 DeactivateVolumeGroupJob::prettyDescription() const
 {
-    return tr( "Deactivating volume group named <strong>%1</strong>…", "@status" ).arg( m_device->name() );
+    return tr( "Deactivate volume group named <strong>%1</strong>." ).arg( m_device->name() );
 }
 
 QString
 DeactivateVolumeGroupJob::prettyStatusMessage() const
 {
-    return tr( "Deactivating volume group named %1…", "@status" ).arg( m_device->name() );
+    return tr( "Deactivate volume group named %1." ).arg( m_device->name() );
 }
 
 Calamares::JobResult

src/modules/partition/jobs/DeletePartitionJob.cpp

@@ -70,19 +70,19 @@ DeletePartitionJob::DeletePartitionJob( Device* device, Partition* partition )
 QString
 DeletePartitionJob::prettyName() const
 {
-    return tr( "Deleting partition %1…", "@status" ).arg( m_partition->partitionPath() );
+    return tr( "Delete partition %1." ).arg( m_partition->partitionPath() );
 }
 
 QString
 DeletePartitionJob::prettyDescription() const
 {
-    return tr( "Deleting partition <strong>%1</strong>…", "@status" ).arg( m_partition->partitionPath() );
+    return tr( "Delete partition <strong>%1</strong>." ).arg( m_partition->partitionPath() );
 }
 
 QString
 DeletePartitionJob::prettyStatusMessage() const
 {
-    return tr( "Deleting partition %1…", "@status" ).arg( m_partition->partitionPath() );
+    return tr( "Deleting partition %1." ).arg( m_partition->partitionPath() );
 }
 
 Calamares::JobResult

src/modules/partition/jobs/FillGlobalStorageJob.cpp

@@ -176,7 +176,7 @@ FillGlobalStorageJob::FillGlobalStorageJob( const Config*, QList< Device* > devi
 QString
 FillGlobalStorageJob::prettyName() const
 {
-    return tr( "Set partition information", "@title" );
+    return tr( "Set partition information" );
 }
 
 
@@ -206,15 +206,14 @@ FillGlobalStorageJob::prettyDescription() const
                     if ( !features.isEmpty() )
                     {
                         lines.append( tr( "Install %1 on <strong>new</strong> %2 system partition "
-                                          "with features <em>%3</em>",
-                                          "@info" )
+                                          "with features <em>%3</em>" )
                                           .arg( Calamares::Branding::instance()->shortProductName() )
                                           .arg( fsType )
                                           .arg( features ) );
                     }
                     else
                     {
-                        lines.append( tr( "Install %1 on <strong>new</strong> %2 system partition", "@info" )
+                        lines.append( tr( "Install %1 on <strong>new</strong> %2 system partition." )
                                           .arg( Calamares::Branding::instance()->shortProductName() )
                                           .arg( fsType ) );
                     }
@@ -224,8 +223,7 @@ FillGlobalStorageJob::prettyDescription() const
                     if ( !features.isEmpty() )
                     {
                         lines.append( tr( "Set up <strong>new</strong> %2 partition with mount point "
-                                          "<strong>%1</strong> and features <em>%3</em>",
-                                          "@info" )
+                                          "<strong>%1</strong> and features <em>%3</em>." )
                                           .arg( mountPoint )
                                           .arg( fsType )
                                           .arg( features ) );
@@ -233,8 +231,7 @@ FillGlobalStorageJob::prettyDescription() const
                     else
                     {
                         lines.append( tr( "Set up <strong>new</strong> %2 partition with mount point "
-                                          "<strong>%1</strong>%3",
-                                          "@info" )
+                                          "<strong>%1</strong>%3." )
                                           .arg( mountPoint )
                                           .arg( fsType )
                                           .arg( features ) );
@@ -248,8 +245,7 @@ FillGlobalStorageJob::prettyDescription() const
                     if ( !features.isEmpty() )
                     {
                         lines.append( tr( "Install %2 on %3 system partition <strong>%1</strong>"
-                                          " with features <em>%4</em>",
-                                          "@info" )
+                                          " with features <em>%4</em>." )
                                           .arg( path )
                                           .arg( Calamares::Branding::instance()->shortProductName() )
                                           .arg( fsType )
@@ -257,7 +253,7 @@ FillGlobalStorageJob::prettyDescription() const
                     }
                     else
                     {
-                        lines.append( tr( "Install %2 on %3 system partition <strong>%1</strong>", "@info" )
+                        lines.append( tr( "Install %2 on %3 system partition <strong>%1</strong>." )
                                           .arg( path )
                                           .arg( Calamares::Branding::instance()->shortProductName() )
                                           .arg( fsType ) );
@@ -268,8 +264,7 @@ FillGlobalStorageJob::prettyDescription() const
                     if ( !features.isEmpty() )
                     {
                         lines.append( tr( "Set up %3 partition <strong>%1</strong> with mount point "
-                                          "<strong>%2</strong> and features <em>%4</em>",
-                                          "@info" )
+                                          "<strong>%2</strong> and features <em>%4</em>." )
                                           .arg( path )
                                           .arg( mountPoint )
                                           .arg( fsType )
@@ -278,8 +273,7 @@ FillGlobalStorageJob::prettyDescription() const
                     else
                     {
                         lines.append( tr( "Set up %3 partition <strong>%1</strong> with mount point "
-                                          "<strong>%2</strong>%4…",
-                                          "@info" )
+                                          "<strong>%2</strong>%4." )
                                           .arg( path )
                                           .arg( mountPoint )
                                           .arg( fsType )
@@ -293,7 +287,7 @@ FillGlobalStorageJob::prettyDescription() const
     QVariant bootloaderMap = createBootLoaderMap();
     if ( !m_bootLoaderPath.isEmpty() )
     {
-        lines.append( tr( "Install boot loader on <strong>%1</strong>…", "@info" ).arg( m_bootLoaderPath ) );
+        lines.append( tr( "Install boot loader on <strong>%1</strong>." ).arg( m_bootLoaderPath ) );
     }
     return lines.join( "<br/>" );
 }
@@ -302,7 +296,7 @@ FillGlobalStorageJob::prettyDescription() const
 QString
 FillGlobalStorageJob::prettyStatusMessage() const
 {
-    return tr( "Setting up mount points…", "@status" );
+    return tr( "Setting up mount points." );
 }
 
 

src/modules/partition/jobs/FormatPartitionJob.cpp

@@ -36,7 +36,7 @@ FormatPartitionJob::FormatPartitionJob( Device* device, Partition* partition )
 QString
 FormatPartitionJob::prettyName() const
 {
-    return tr( "Format partition %1 (file system: %2, size: %3 MiB) on %4", "@title" )
+    return tr( "Format partition %1 (file system: %2, size: %3 MiB) on %4." )
         .arg( m_partition->partitionPath() )
         .arg( userVisibleFS( m_partition->fileSystem() ) )
         .arg( m_partition->capacity() / 1024 / 1024 )
@@ -47,8 +47,7 @@ QString
 FormatPartitionJob::prettyDescription() const
 {
     return tr( "Format <strong>%3MiB</strong> partition <strong>%1</strong> with "
-               "file system <strong>%2</strong>",
-               "@info" )
+               "file system <strong>%2</strong>." )
         .arg( m_partition->partitionPath() )
         .arg( userVisibleFS( m_partition->fileSystem() ) )
         .arg( m_partition->capacity() / 1024 / 1024 );
@@ -61,7 +60,8 @@ FormatPartitionJob::prettyStatusMessage() const
         ? m_partition->partitionPath()
         : tr( "%1 (%2)", "partition label %1 (device path %2)" )
               .arg( m_partition->label(), m_partition->partitionPath() );
-    return tr( "Formatting partition %1 with file system %2…", "@status" )
+    return tr( "Formatting partition %1 with "
+               "file system %2." )
         .arg( partitionLabel, userVisibleFS( m_partition->fileSystem() ) );
 }
 

src/modules/partition/jobs/RemoveVolumeGroupJob.cpp

@@ -23,19 +23,19 @@ RemoveVolumeGroupJob::RemoveVolumeGroupJob( Device*, LvmDevice* device )
 QString
 RemoveVolumeGroupJob::prettyName() const
 {
-    return tr( "Removing Volume Group named %1…", "@status" ).arg( m_device->name() );
+    return tr( "Remove Volume Group named %1." ).arg( m_device->name() );
 }
 
 QString
 RemoveVolumeGroupJob::prettyDescription() const
 {
-    return tr( "Removing Volume Group named <strong>%1</strong>…", "@status" ).arg( m_device->name() );
+    return tr( "Remove Volume Group named <strong>%1</strong>." ).arg( m_device->name() );
 }
 
 QString
 RemoveVolumeGroupJob::prettyStatusMessage() const
 {
-    return tr( "Removing Volume Group named %1…", "@status" ).arg( m_device->name() );
+    return tr( "Remove Volume Group named %1." ).arg( m_device->name() );
 }
 
 Calamares::JobResult

src/modules/partition/jobs/ResizePartitionJob.cpp

@@ -36,13 +36,16 @@ ResizePartitionJob::ResizePartitionJob( Device* device, Partition* partition, qi
 QString
 ResizePartitionJob::prettyName() const
 {
-    return tr( "Resize partition %1", "@title" ).arg( partition()->partitionPath() );
+    // FIXME: Copy PM ResizeOperation code which generates a description of the
+    // operation
+    return tr( "Resize partition %1." ).arg( partition()->partitionPath() );
 }
 
 QString
 ResizePartitionJob::prettyDescription() const
 {
-    return tr( "Resize <strong>%2MiB</strong> partition <strong>%1</strong> to <strong>%3MiB</strong>", "@info" )
+    return tr( "Resize <strong>%2MiB</strong> partition <strong>%1</strong> to "
+               "<strong>%3MiB</strong>." )
         .arg( partition()->partitionPath() )
         .arg( ( BytesToMiB( m_oldLastSector - m_oldFirstSector + 1 ) * partition()->sectorSize() ) )
         .arg( ( BytesToMiB( m_newLastSector - m_newFirstSector + 1 ) * partition()->sectorSize() ) );
@@ -51,7 +54,8 @@ ResizePartitionJob::prettyDescription() const
 QString
 ResizePartitionJob::prettyStatusMessage() const
 {
-    return tr( "Resizing %2MiB partition %1 to %3MiB…", "@status" )
+    return tr( "Resizing %2MiB partition %1 to "
+               "%3MiB." )
         .arg( partition()->partitionPath() )
         .arg( ( BytesToMiB( m_oldLastSector - m_oldFirstSector + 1 ) * partition()->sectorSize() ) )
         .arg( ( BytesToMiB( m_newLastSector - m_newFirstSector + 1 ) * partition()->sectorSize() ) );

src/modules/partition/jobs/ResizeVolumeGroupJob.cpp

@@ -25,7 +25,7 @@ ResizeVolumeGroupJob::ResizeVolumeGroupJob( Device*, LvmDevice* device, QVector<
 QString
 ResizeVolumeGroupJob::prettyName() const
 {
-    return tr( "Resize volume group named %1 from %2 to %3", "@title" )
+    return tr( "Resize volume group named %1 from %2 to %3." )
         .arg( m_device->name() )
         .arg( currentPartitions() )
         .arg( targetPartitions() );
@@ -34,8 +34,7 @@ ResizeVolumeGroupJob::prettyName() const
 QString
 ResizeVolumeGroupJob::prettyDescription() const
 {
-    return tr( "Resize volume group named <strong>%1</strong> from <strong>%2</strong> to <strong>%3</strong>",
-               "@info" )
+    return tr( "Resize volume group named <strong>%1</strong> from <strong>%2</strong> to <strong>%3</strong>." )
         .arg( m_device->name() )
         .arg( currentPartitions() )
         .arg( targetPartitions() );
@@ -44,7 +43,7 @@ ResizeVolumeGroupJob::prettyDescription() const
 QString
 ResizeVolumeGroupJob::prettyStatusMessage() const
 {
-    return tr( "Resizing volume group named %1 from %2 to %3…", "@status" )
+    return tr( "Resize volume group named %1 from %2 to %3." )
         .arg( m_device->name() )
         .arg( currentPartitions() )
         .arg( targetPartitions() );

src/modules/partition/jobs/SetPartitionFlagsJob.cpp

@@ -41,17 +41,17 @@ SetPartFlagsJob::prettyName() const
 {
     if ( !partition()->partitionPath().isEmpty() )
     {
-        return tr( "Set flags on partition %1", "@title" ).arg( partition()->partitionPath() );
+        return tr( "Set flags on partition %1." ).arg( partition()->partitionPath() );
     }
 
     QString fsNameForUser = userVisibleFS( partition()->fileSystem() );
     if ( !fsNameForUser.isEmpty() )
     {
-        return tr( "Set flags on %1MiB %2 partition", "@title" )
+        return tr( "Set flags on %1MiB %2 partition." )
             .arg( BytesToMiB( partition()->capacity() ) )
             .arg( fsNameForUser );
     }
-    return tr( "Set flags on new partition", "@title" );
+    return tr( "Set flags on new partition." );
 }
 
 QString
@@ -62,22 +62,23 @@ SetPartFlagsJob::prettyDescription() const
     {
         if ( !partition()->partitionPath().isEmpty() )
         {
-            return tr( "Clear flags on partition <strong>%1</strong>", "@info" ).arg( partition()->partitionPath() );
+            return tr( "Clear flags on partition <strong>%1</strong>." ).arg( partition()->partitionPath() );
         }
 
         QString fsNameForUser = userVisibleFS( partition()->fileSystem() );
         if ( !fsNameForUser.isEmpty() )
         {
-            return tr( "Clear flags on %1MiB <strong>%2</strong> partition", "@info" )
+            return tr( "Clear flags on %1MiB <strong>%2</strong> partition." )
                 .arg( BytesToMiB( partition()->capacity() ) )
                 .arg( fsNameForUser );
         }
-        return tr( "Clear flags on new partition", "@info" );
+        return tr( "Clear flags on new partition." );
     }
 
     if ( !partition()->partitionPath().isEmpty() )
     {
-        return tr( "Set flags on partition <strong>%1</strong> to <strong>%2</strong>", "@info" )
+        return tr( "Flag partition <strong>%1</strong> as "
+                   "<strong>%2</strong>." )
             .arg( partition()->partitionPath() )
             .arg( flagsList.join( ", " ) );
     }
@@ -85,13 +86,14 @@ SetPartFlagsJob::prettyDescription() const
     QString fsNameForUser = userVisibleFS( partition()->fileSystem() );
     if ( !fsNameForUser.isEmpty() )
     {
-        return tr( "Set flags on %1MiB <strong>%2</strong> partition to <strong>%3</strong>", "@info" )
+        return tr( "Flag %1MiB <strong>%2</strong> partition as "
+                   "<strong>%3</strong>." )
             .arg( BytesToMiB( partition()->capacity() ) )
             .arg( fsNameForUser )
             .arg( flagsList.join( ", " ) );
     }
 
-    return tr( "Set flags on new partition to <strong>%1</strong>", "@info" ).arg( flagsList.join( ", " ) );
+    return tr( "Flag new partition as <strong>%1</strong>." ).arg( flagsList.join( ", " ) );
 }
 
 QString
@@ -102,24 +104,24 @@ SetPartFlagsJob::prettyStatusMessage() const
     {
         if ( !partition()->partitionPath().isEmpty() )
         {
-            return tr( "Clearing flags on partition <strong>%1</strong>…", "@status" )
-                .arg( partition()->partitionPath() );
+            return tr( "Clearing flags on partition <strong>%1</strong>." ).arg( partition()->partitionPath() );
         }
 
         QString fsNameForUser = userVisibleFS( partition()->fileSystem() );
         if ( !fsNameForUser.isEmpty() )
         {
-            return tr( "Clearing flags on %1MiB <strong>%2</strong> partition…", "@status" )
+            return tr( "Clearing flags on %1MiB <strong>%2</strong> partition." )
                 .arg( BytesToMiB( partition()->capacity() ) )
                 .arg( fsNameForUser );
         }
 
-        return tr( "Clearing flags on new partition…", "@status" );
+        return tr( "Clearing flags on new partition." );
     }
 
     if ( !partition()->partitionPath().isEmpty() )
     {
-        return tr( "Setting flags <strong>%2</strong> on partition <strong>%1</strong>…", "@status" )
+        return tr( "Setting flags <strong>%2</strong> on partition "
+                   "<strong>%1</strong>." )
             .arg( partition()->partitionPath() )
             .arg( flagsList.join( ", " ) );
     }
@@ -127,13 +129,14 @@ SetPartFlagsJob::prettyStatusMessage() const
     QString fsNameForUser = userVisibleFS( partition()->fileSystem() );
     if ( !fsNameForUser.isEmpty() )
     {
-        return tr( "Setting flags <strong>%3</strong> on %1MiB <strong>%2</strong> partition…", "@status" )
+        return tr( "Setting flags <strong>%3</strong> on "
+                   "%1MiB <strong>%2</strong> partition." )
             .arg( BytesToMiB( partition()->capacity() ) )
             .arg( fsNameForUser )
             .arg( flagsList.join( ", " ) );
     }
 
-    return tr( "Setting flags <strong>%1</strong> on new partition…", "@status" ).arg( flagsList.join( ", " ) );
+    return tr( "Setting flags <strong>%1</strong> on new partition." ).arg( flagsList.join( ", " ) );
 }
 
 Calamares::JobResult

src/modules/plasmalnf/PlasmaLnfJob.cpp

@@ -30,7 +30,7 @@ PlasmaLnfJob::~PlasmaLnfJob() {}
 QString
 PlasmaLnfJob::prettyName() const
 {
-    return tr( "Applying Plasma Look-and-Feel…", "@status" );
+    return tr( "Plasma Look-and-Feel Job" );
 }
 
 Calamares::JobResult

src/modules/plasmalnf/PlasmaLnfViewStep.cpp

@@ -40,7 +40,7 @@ PlasmaLnfViewStep::~PlasmaLnfViewStep()
 QString
 PlasmaLnfViewStep::prettyName() const
 {
-    return tr( "Look-and-Feel", "@label" );
+    return tr( "Look-and-Feel" );
 }
 
 

src/modules/preservefiles/PreserveFiles.cpp

@@ -53,7 +53,7 @@ PreserveFiles::~PreserveFiles() {}
 QString
 PreserveFiles::prettyName() const
 {
-    return tr( "Saving files for later…", "@status" );
+    return tr( "Saving files for later ..." );
 }
 
 Calamares::JobResult

src/modules/removeuser/RemoveUserJob.cpp

@@ -29,7 +29,7 @@ RemoveUserJob::~RemoveUserJob() {}
 QString
 RemoveUserJob::prettyName() const
 {
-    return tr( "Removing live user from the target system…", "@status" );
+    return tr( "Remove live user from target system" );
 }
 
 Calamares::JobResult

src/modules/shellprocess/ShellProcessJob.cpp

@@ -35,7 +35,7 @@ ShellProcessJob::prettyName() const
     {
         return m_name->get();
     }
-    return tr( "Running shell processes…", "@status" );
+    return tr( "Shell Processes Job" );
 }
 
 Calamares::JobResult

src/modules/summary/CMakeLists.txt

@@ -9,7 +9,6 @@ calamares_add_plugin(summary
     EXPORT_MACRO PLUGINDLLEXPORT_PRO
     SOURCES
         Config.cpp
-        SummaryModel.cpp
         SummaryPage.cpp
         SummaryViewStep.cpp
     UI

src/modules/summary/Config.cpp

@@ -10,8 +10,6 @@
 
 #include "Config.h"
 
-#include "SummaryModel.h"
-
 #include "Branding.h"
 #include "Settings.h"
 #include "ViewManager.h"
@@ -20,6 +18,67 @@
 #include "utils/Retranslator.h"
 #include "viewpages/ExecutionViewStep.h"
 
+SummaryModel::SummaryModel( QObject* parent )
+    : QAbstractListModel( parent )
+{
+}
+
+QHash< int, QByteArray >
+SummaryModel::roleNames() const
+{
+    // Not including WidgetRole here because that wouldn't make sense
+    // in a QML context which is where the roleNames are important.
+    return { { TitleRole, "title" }, { MessageRole, "message" } };
+}
+
+QVariant
+SummaryModel::data( const QModelIndex& index, int role ) const
+{
+    if ( !index.isValid() )
+    {
+        return QVariant();
+    }
+    auto& item = m_summary.at( index.row() );
+    switch ( role )
+    {
+    case TitleRole:
+        return item.title;
+    case MessageRole:
+        return item.message;
+    case WidgetRole:
+        return item.widget ? QVariant::fromValue( item.widget ) : QVariant();
+    default:
+        return QVariant();
+    }
+}
+
+int
+SummaryModel::rowCount( const QModelIndex& ) const
+{
+    return m_summary.count();
+}
+
+void
+SummaryModel::setSummaryList( const Calamares::ViewStepList& steps, bool withWidgets )
+{
+    beginResetModel();
+    m_summary.clear();
+
+    for ( Calamares::ViewStep* step : steps )
+    {
+        QString text = step->prettyStatus();
+        QWidget* widget = withWidgets ? step->createSummaryWidget() : nullptr;
+
+        if ( text.isEmpty() && !widget )
+        {
+            continue;
+        }
+
+        m_summary << StepSummary { step->prettyName(), text, widget };
+    }
+    endResetModel();
+}
+
 Config::Config( QObject* parent )
     : QObject( parent )
     , m_summary( new SummaryModel( this ) )
@@ -32,7 +91,7 @@ Config::Config( QObject* parent )
 void
 Config::retranslate()
 {
-    m_title = tr( "Summary", "@label" );
+    m_title = tr( "Summary" );
 
     if ( Calamares::Settings::instance()->isSetupMode() )
     {

src/modules/summary/Config.h

@@ -11,10 +11,60 @@
 #ifndef SUMMARY_CONFIG_H
 #define SUMMARY_CONFIG_H
 
-#include "SummaryModel.h"
-
 #include "viewpages/ViewStep.h"
 
+#include <QAbstractListModel>
+#include <QObject>
+#include <QQmlParserStatus>
+
+class Config;
+
+/** @brief Data for one step
+ *
+ * A step generally has a text description, but **may** have a
+ * QWidget. There is no ownership of the QWidget, that is assumed
+ * to be handed off to some owning parent-widget.
+ */
+struct StepSummary
+{
+    QString title;
+    QString message;
+    QWidget* widget = nullptr;
+};
+
+class SummaryModel : public QAbstractListModel
+{
+    Q_OBJECT
+    friend class Config;
+
+public:
+    enum Roles : int
+    {
+        TitleRole = Qt::DisplayRole,  // Name of the step
+        MessageRole = Qt::UserRole,  // String saying what it will do
+        WidgetRole,  // Pointer to widget
+    };
+
+    explicit SummaryModel( QObject* parent = nullptr );
+    int rowCount( const QModelIndex& = QModelIndex() ) const override;
+    QVariant data( const QModelIndex& index, int role ) const override;
+
+protected:
+    QHash< int, QByteArray > roleNames() const override;
+
+private:
+    /** @brief Sets the model data from @p steps
+     *
+     * Replaces the list of summaries with summaries given by
+     * the jobs and ViewSteps objects in @p steps. If @p withWidgets
+     * is @c true, then also queries for widget summaries alongside
+     * the text summaries for each step.
+     */
+    void setSummaryList( const Calamares::ViewStepList& steps, bool withWidgets = false );
+
+    QVector< StepSummary > m_summary;
+};
+
 class Config : public QObject
 {
     Q_OBJECT

src/modules/summary/SummaryModel.cpp

@@ -1,74 +0,0 @@
-/* === This file is part of Calamares - <https://calamares.io> ===
- *
- *   SPDX-FileCopyrightText: 2020, Camilo Higuita <milo.h@aol.com>
- *   SPDX-FileCopyrightText: 2021 Anke Boersma <demm@kaosx.us>
- *   SPDX-License-Identifier: GPL-3.0-or-later
- *
- *   Calamares is Free Software: see the License-Identifier above.
- *
- */
-
-#include "SummaryModel.h"
-
-#include <QWidget>
-
-SummaryModel::SummaryModel( QObject* parent )
-    : QAbstractListModel( parent )
-{
-}
-
-QHash< int, QByteArray >
-SummaryModel::roleNames() const
-{
-    // Not including WidgetRole here because that wouldn't make sense
-    // in a QML context which is where the roleNames are important.
-    return { { TitleRole, "title" }, { MessageRole, "message" } };
-}
-
-QVariant
-SummaryModel::data( const QModelIndex& index, int role ) const
-{
-    if ( !index.isValid() )
-    {
-        return QVariant();
-    }
-    auto& item = m_summary.at( index.row() );
-    switch ( role )
-    {
-    case TitleRole:
-        return item.title;
-    case MessageRole:
-        return item.message;
-    case WidgetRole:
-        return item.widget ? QVariant::fromValue( item.widget ) : QVariant();
-    default:
-        return QVariant();
-    }
-}
-
-int
-SummaryModel::rowCount( const QModelIndex& ) const
-{
-    return m_summary.count();
-}
-
-void
-SummaryModel::setSummaryList( const Calamares::ViewStepList& steps, bool withWidgets )
-{
-    beginResetModel();
-    m_summary.clear();
-
-    for ( Calamares::ViewStep* step : steps )
-    {
-        QString text = step->prettyStatus();
-        QWidget* widget = withWidgets ? step->createSummaryWidget() : nullptr;
-
-        if ( text.isEmpty() && !widget )
-        {
-            continue;
-        }
-
-        m_summary << StepSummary { step->prettyName(), text, widget };
-    }
-    endResetModel();
-}

src/modules/summary/SummaryModel.h

@@ -1,67 +0,0 @@
-/* === This file is part of Calamares - <https://calamares.io> ===
- *
- *   SPDX-FileCopyrightText: 2019-2020, Adriaan de Groot <groot@kde.org>
- *   SPDX-FileCopyrightText: 2020, Camilo Higuita <milo.h@aol.com>
- *   SPDX-License-Identifier: GPL-3.0-or-later
- *
- *   Calamares is Free Software: see the License-Identifier above.
- *
- */
-
-#ifndef SUMMARY_SUMMARYMODEL_H
-#define SUMMARY_SUMMARYMODEL_H
-
-#include "viewpages/ViewStep.h"
-
-#include <QAbstractListModel>
-#include <QObject>
-
-class Config;
-
-/** @brief Data for one step
- *
- * A step generally has a text description, but **may** have a
- * QWidget. There is no ownership of the QWidget, that is assumed
- * to be handed off to some owning parent-widget.
- */
-struct StepSummary
-{
-    QString title;
-    QString message;
-    QWidget* widget = nullptr;
-};
-
-class SummaryModel : public QAbstractListModel
-{
-    Q_OBJECT
-    friend class Config;
-
-public:
-    enum Roles : int
-    {
-        TitleRole = Qt::DisplayRole,  // Name of the step
-        MessageRole = Qt::UserRole,  // String saying what it will do
-        WidgetRole,  // Pointer to widget
-    };
-
-    explicit SummaryModel( QObject* parent = nullptr );
-    int rowCount( const QModelIndex& = QModelIndex() ) const override;
-    QVariant data( const QModelIndex& index, int role ) const override;
-
-protected:
-    QHash< int, QByteArray > roleNames() const override;
-
-private:
-    /** @brief Sets the model data from @p steps
-     *
-     * Replaces the list of summaries with summaries given by
-     * the jobs and ViewSteps objects in @p steps. If @p withWidgets
-     * is @c true, then also queries for widget summaries alongside
-     * the text summaries for each step.
-     */
-    void setSummaryList( const Calamares::ViewStepList& steps, bool withWidgets = false );
-
-    QVector< StepSummary > m_summary;
-};
-
-#endif

src/modules/summaryq/CMakeLists.txt

@@ -17,7 +17,6 @@ calamares_add_plugin(summaryq
     SOURCES
         SummaryQmlViewStep.cpp
         ${_summary}/Config.cpp
-        ${_summary}/SummaryModel.cpp
     UI
     RESOURCES
         summaryq${QT_VERSION_SUFFIX}.qrc

src/modules/tracking/TrackingJobs.cpp

@@ -103,7 +103,7 @@ TrackingInstallJob::prettyName() const
 QString
 TrackingInstallJob::prettyStatusMessage() const
 {
-    return QCoreApplication::translate( "TrackingInstallJob", "Sending installation feedback…", "@status" );
+    return QCoreApplication::translate( "TrackingInstallJob", "Sending installation feedback." );
 }
 
 Calamares::JobResult
@@ -138,7 +138,7 @@ TrackingMachineUpdateManagerJob::prettyName() const
 QString
 TrackingMachineUpdateManagerJob::prettyStatusMessage() const
 {
-    return QCoreApplication::translate( "TrackingMachineUpdateManagerJob", "Configuring machine feedback…", "@status" );
+    return QCoreApplication::translate( "TrackingMachineUpdateManagerJob", "Configuring machine feedback." );
 }
 
 Calamares::JobResult
@@ -195,7 +195,7 @@ TrackingKUserFeedbackJob::prettyName() const
 QString
 TrackingKUserFeedbackJob::prettyStatusMessage() const
 {
-    return QCoreApplication::translate( "TrackingKUserFeedbackJob", "Configuring KDE user feedback…", "@status" );
+    return QCoreApplication::translate( "TrackingKUserFeedbackJob", "Configuring KDE user feedback." );
 }
 
 Calamares::JobResult

src/modules/tracking/TrackingViewStep.cpp

@@ -46,7 +46,7 @@ TrackingViewStep::~TrackingViewStep()
 QString
 TrackingViewStep::prettyName() const
 {
-    return tr( "Feedback", "@title" );
+    return tr( "Feedback" );
 }
 
 

src/modules/umount/UmountJob.cpp

@@ -36,7 +36,7 @@ UmountJob::~UmountJob() {}
 QString
 UmountJob::prettyName() const
 {
-    return tr( "Unmounting file systems…", "@status" );
+    return tr( "Unmount file systems." );
 }
 
 static Calamares::JobResult

src/modules/users/CreateUserJob.cpp

@@ -36,13 +36,13 @@ CreateUserJob::prettyName() const
 QString
 CreateUserJob::prettyDescription() const
 {
-    return tr( "Create user <strong>%1</strong>" ).arg( m_config->loginName() );
+    return tr( "Create user <strong>%1</strong>." ).arg( m_config->loginName() );
 }
 
 QString
 CreateUserJob::prettyStatusMessage() const
 {
-    return m_status.isEmpty() ? tr( "Creating user %1…", "@status" ).arg( m_config->loginName() ) : m_status;
+    return m_status.isEmpty() ? tr( "Creating user %1" ).arg( m_config->loginName() ) : m_status;
 }
 
 static Calamares::JobResult
@@ -117,7 +117,7 @@ CreateUserJob::exec()
     // This GS setting comes from the **partitioning** module.
     if ( reuseHome )
     {
-        m_status = tr( "Preserving home directory…", "@status" );
+        m_status = tr( "Preserving home directory" );
         emit progress( 0.2 );
         QString shellFriendlyHome = "/home/" + m_config->loginName();
         QDir existingHome( destDir.absolutePath() + shellFriendlyHome );
@@ -134,7 +134,7 @@ CreateUserJob::exec()
 
     cDebug() << "[CREATEUSER]: creating user";
 
-    m_status = tr( "Creating user %1…", "@status" ).arg( m_config->loginName() );
+    m_status = tr( "Creating user %1" ).arg( m_config->loginName() );
     emit progress( 0.5 );
     auto useraddResult = createUser( m_config->loginName(), m_config->fullName(), m_config->userShell() );
     if ( !useraddResult )
@@ -142,7 +142,7 @@ CreateUserJob::exec()
         return useraddResult;
     }
 
-    m_status = tr( "Configuring user %1", "@status" ).arg( m_config->loginName() );
+    m_status = tr( "Configuring user %1" ).arg( m_config->loginName() );
     emit progress( 0.8 );
     auto usergroupsResult = setUserGroups( m_config->loginName(), m_config->groupsForThisUser() );
     if ( !usergroupsResult )
@@ -150,7 +150,7 @@ CreateUserJob::exec()
         return usergroupsResult;
     }
 
-    m_status = tr( "Setting file permissions…", "@status" );
+    m_status = tr( "Setting file permissions" );
     emit progress( 0.9 );
     QString userGroup = QString( "%1:%2" ).arg( m_config->loginName() ).arg( m_config->loginName() );
     QString homeDir = QString( "/home/%1" ).arg( m_config->loginName() );

src/modules/users/MiscJobs.cpp

@@ -31,7 +31,7 @@ SetupSudoJob::SetupSudoJob( const QString& group, Config::SudoStyle style )
 QString
 SetupSudoJob::prettyName() const
 {
-    return tr( "Configuring <pre>sudo</pre> users…", "@status" );
+    return tr( "Configure <pre>sudo</pre> users." );
 }
 
 static QString
@@ -178,7 +178,7 @@ SetupGroupsJob::SetupGroupsJob( const Config* config )
 QString
 SetupGroupsJob::prettyName() const
 {
-    return tr( "Preparing groups…", "@status" );
+    return tr( "Preparing groups." );
 }
 
 Calamares::JobResult

src/modules/users/SetHostNameJob.cpp

@@ -45,7 +45,7 @@ SetHostNameJob::prettyDescription() const
 QString
 SetHostNameJob::prettyStatusMessage() const
 {
-    return tr( "Setting hostname %1…", "@status" ).arg( m_config->hostname() );
+    return tr( "Setting hostname %1." ).arg( m_config->hostname() );
 }
 
 STATICTEST bool

src/modules/users/SetPasswordJob.cpp

@@ -41,7 +41,7 @@ SetPasswordJob::prettyName() const
 QString
 SetPasswordJob::prettyStatusMessage() const
 {
-    return tr( "Setting password for user %1…", "@status" ).arg( m_userName );
+    return tr( "Setting password for user %1." ).arg( m_userName );
 }
 
 #ifndef HAVE_CRYPT_GENSALT

src/modules/usersq/usersq-qt6.qml

@@ -59,7 +59,7 @@ Kirigami.ScrollablePage {
                 id: _userNameField
                 width: parent.width
                 enabled: config.isEditable("fullName")
-                placeholderText: qsTr("Your full name")
+                placeholderText: qsTr("Your Full Name")
                 text: config.fullName
                 onTextChanged: config.setFullName(text)
 
@@ -83,7 +83,7 @@ Kirigami.ScrollablePage {
                 id: _userLoginField
                 width: parent.width
                 enabled: config.isEditable("loginName")
-                placeholderText: qsTr("Login name")
+                placeholderText: qsTr("Login Name")
                 text: config.loginName
                 validator: RegularExpressionValidator { regularExpression: /[a-z_][a-z0-9_-]*[$]?$/ }
 
@@ -149,7 +149,7 @@ Kirigami.ScrollablePage {
             TextField {
                 id: _hostName
                 width: parent.width
-                placeholderText: qsTr("Computer name")
+                placeholderText: qsTr("Computer Name")
                 text: config.hostname
                 validator: RegularExpressionValidator { regularExpression: /[a-zA-Z0-9][-a-zA-Z0-9_]+/ }
 
@@ -234,7 +234,7 @@ Kirigami.ScrollablePage {
                 TextField {
                     id: _verificationPasswordField
                     width: parent.width / 2 - 10
-                    placeholderText: qsTr("Repeat password")
+                    placeholderText: qsTr("Repeat Password")
                     text: config.userPasswordSecondary
 
                     onTextChanged: _passwordField.text === _verificationPasswordField.text
@@ -324,7 +324,7 @@ Kirigami.ScrollablePage {
                 TextField {
                     id: _rootPasswordField
                     width: parent.width / 2 -10
-                    placeholderText: qsTr("Root password")
+                    placeholderText: qsTr("Root Password")
                     text: config.rootPassword
 
                     onTextChanged: config.setRootPassword(text)
@@ -342,7 +342,7 @@ Kirigami.ScrollablePage {
                 TextField {
                     id: _verificationRootPasswordField
                     width: parent.width / 2 -10
-                    placeholderText: qsTr("Repeat root password")
+                    placeholderText: qsTr("Repeat Root Password")
                     text: config.rootPasswordSecondary
 
                     onTextChanged: _rootPasswordField.text === _verificationRootPasswordField.text

src/modules/usersq/usersq.qml

@@ -60,7 +60,7 @@ Kirigami.ScrollablePage {
                 id: _userNameField
                 width: parent.width
                 enabled: config.isEditable("fullName")
-                placeholderText: qsTr("Your full name")
+                placeholderText: qsTr("Your Full Name")
                 text: config.fullName
                 onTextChanged: config.setFullName(text)
 
@@ -84,7 +84,7 @@ Kirigami.ScrollablePage {
                 id: _userLoginField
                 width: parent.width
                 enabled: config.isEditable("loginName")
-                placeholderText: qsTr("Login name")
+                placeholderText: qsTr("Login Name")
                 text: config.loginName
                 validator: RegularExpressionValidator { regularExpression: /[a-z_][a-z0-9_-]*[$]?$/ }
 
@@ -150,7 +150,7 @@ Kirigami.ScrollablePage {
             TextField {
                 id: _hostName
                 width: parent.width
-                placeholderText: qsTr("Computer name")
+                placeholderText: qsTr("Computer Name")
                 text: config.hostname
                 validator: RegularExpressionValidator { regularExpression: /[a-zA-Z0-9][-a-zA-Z0-9_]+/ }
 
@@ -235,7 +235,7 @@ Kirigami.ScrollablePage {
                 TextField {
                     id: _verificationPasswordField
                     width: parent.width / 2 - 10
-                    placeholderText: qsTr("Repeat password")
+                    placeholderText: qsTr("Repeat Password")
                     text: config.userPasswordSecondary
 
                     onTextChanged: _passwordField.text === _verificationPasswordField.text
@@ -325,7 +325,7 @@ Kirigami.ScrollablePage {
                 TextField {
                     id: _rootPasswordField
                     width: parent.width / 2 -10
-                    placeholderText: qsTr("Root password")
+                    placeholderText: qsTr("Root Password")
                     text: config.rootPassword
 
                     onTextChanged: config.setRootPassword(text)
@@ -343,7 +343,7 @@ Kirigami.ScrollablePage {
                 TextField {
                     id: _verificationRootPasswordField
                     width: parent.width / 2 -10
-                    placeholderText: qsTr("Repeat root password")
+                    placeholderText: qsTr("Repeat Root Password")
                     text: config.rootPasswordSecondary
 
                     onTextChanged: _rootPasswordField.text === _verificationRootPasswordField.text

src/modules/welcome/WelcomePage.cpp

@@ -209,7 +209,7 @@ WelcomePage::retranslate()
 
     ui->mainText->setText( message.arg( Calamares::Branding::instance()->versionedName() ) );
     ui->retranslateUi( this );
-    ui->supportButton->setText( tr( "%1 Support", "@action" ).arg( Calamares::Branding::instance()->shortProductName() ) );
+    ui->supportButton->setText( tr( "%1 support" ).arg( Calamares::Branding::instance()->shortProductName() ) );
 }
 
 void

src/modules/welcome/WelcomeViewStep.cpp

@@ -43,7 +43,7 @@ WelcomeViewStep::~WelcomeViewStep()
 QString
 WelcomeViewStep::prettyName() const
 {
-    return tr( "Welcome", "@title" );
+    return tr( "Welcome" );
 }
 
 

src/modules/welcomeq/WelcomeQmlViewStep.cpp

@@ -37,7 +37,7 @@ WelcomeQmlViewStep::WelcomeQmlViewStep( QObject* parent )
 QString
 WelcomeQmlViewStep::prettyName() const
 {
-    return tr( "Welcome", "@title" );
+    return tr( "Welcome" );
 }
 
 bool

src/modules/welcomeq/welcomeq-qt6.qml

@@ -77,7 +77,7 @@ Page
 
             Button {
                 Layout.fillWidth: true
-                text: qsTr("Known Issues")
+                text: qsTr("Known issues")
                 icon.name: "tools-report-bug"
                 Kirigami.Theme.backgroundColor: Qt.rgba(Kirigami.Theme.backgroundColor.r, Kirigami.Theme.backgroundColor.g, Kirigami.Theme.backgroundColor.b, 0.4)
                 Kirigami.Theme.textColor: Kirigami.Theme.textColor
@@ -88,7 +88,7 @@ Page
 
             Button {
                 Layout.fillWidth: true
-                text: qsTr("Release Notes")
+                text: qsTr("Release notes")
                 icon.name: "folder-text"
                 Kirigami.Theme.backgroundColor: Qt.rgba(Kirigami.Theme.backgroundColor.r, Kirigami.Theme.backgroundColor.g, Kirigami.Theme.backgroundColor.b, 0.4)
                 Kirigami.Theme.textColor: Kirigami.Theme.textColor

src/modules/welcomeq/welcomeq.qml

@@ -77,7 +77,7 @@ Page
 
             Button {
                 Layout.fillWidth: true
-                text: qsTr("Known Issues")
+                text: qsTr("Known issues")
                 icon.name: "tools-report-bug"
                 Kirigami.Theme.backgroundColor: Qt.rgba(Kirigami.Theme.backgroundColor.r, Kirigami.Theme.backgroundColor.g, Kirigami.Theme.backgroundColor.b, 0.4)
                 Kirigami.Theme.textColor: Kirigami.Theme.textColor
@@ -88,7 +88,7 @@ Page
 
             Button {
                 Layout.fillWidth: true
-                text: qsTr("Release Notes")
+                text: qsTr("Release notes")
                 icon.name: "folder-text"
                 Kirigami.Theme.backgroundColor: Qt.rgba(Kirigami.Theme.backgroundColor.r, Kirigami.Theme.backgroundColor.g, Kirigami.Theme.backgroundColor.b, 0.4)
                 Kirigami.Theme.textColor: Kirigami.Theme.textColor

src/modules/zfs/ZfsJob.cpp

@@ -99,7 +99,7 @@ ZfsJob::~ZfsJob() {}
 QString
 ZfsJob::prettyName() const
 {
-    return tr( "Creating ZFS pools and datasets…", "@status" );
+    return tr( "Create ZFS pools and datasets" );
 }
 
 void