- Transifex tools complain about missing Q_OBJECT (which makes
some sense -- you end up with a different context for calls
to tr(), of the base class).
Move some of the texts to the new TranslationFix, from ViewManager,
and use them. Keep them in ViewManager, too, so that the translations
with context ViewManager are not removed just now.
This is intended to apply translations to some common Qt UI components.
Example: a QMessageBox with standard buttons OK and Cancel; the text
for that is determined at startup using the system locale, and later
changes to the current locale or the current translation catalog,
do not affect OK and Cancel. It might be possible to load a catalog
with the right translation strings, except that there is no way to
know what the context or catalog **is** for the strings that are
used to label standard buttons: they can come from Qt base, or
the platform, or the theme. Merely loading the Qt Base translations
for the correct language does not help, because those translations
do not contain an "OK" string with the context used for standard
buttons.
Do the translation by hand; then we have all of the Calamares
languages covered, too, which is more than the Qt translations do.
Move the CMake code responsible for building the translations from
the src/calamares directory (yeah, yeah, the translations need to
link into the executable) into lang/ (which is where the source
and other infrastructure lives).
Prompted by Linlinger, I've reconsidered the names of languages
in the drop-down in the welcome page. We already have the
infrastructure for assigning specific names / locales to
"Calamares locale names" (which match Transifex names, not
necessarily Qt names). Use that to put exactly two Chinese-
language translations in the drop-down:
- Simplified Chinese (code zh_CN)
- Traditional Chinese (code zh_TW)
Drop zh (which is a peculiar locale name anyway) and zh_HK
(which is Traditional Chinese, but using the geographic
boundary is a bit weird; we're going to ignore the
minor orthographic differences with Traditional Chinese
written elsewhere for now).
Note that this makes the drop-down show "Chinese"
in the English column, twice; the difference is visible
only in the native-language representation.
SEE #1741
rewrite of keyboardq.qml, reduce stackview to 2, use a combobox for
keyboard models list
colors set to configurable
.xml files used for keyboard layouts, about a dozen added now
builds, runs, actions record as intended, GS filled correctly
With old Qt, Calamares could only run one check on a thread,
because the NAM would be switched to NotAccessible --
subsequent checks would fail because the NAM is already
hard-set to NotAccessible, so it could never be turned back
on by Calamares code.
Reset the accessible flag for the NAM while checking if
the internet is there.
- India (when in English) should use the English variant, not Hindi
- While here, fix up minor items in code:
- Typo in comment
- Asturian doesn't need a special case (which didn't match, anyway)
- Don't debug-log a country-name that might be entirely wrong
(the layout is English, variant "in" but "in" interpreted as
a country is Indonesia, and the actually-desired name is eng_in
which isn't a QLocale name at all -- just like the Hausa and Igbo
special cases)
The test was loading the config file (for testing) either from the
build directory or possibly the source directory; if the config
in the build-dir was edited (for other testing purposes) then
the test would fail. Load only the source-dir version of the file.
- improve logging
- fix failing tests -- the observed and expected behavior is
to fill in a fallback check-URL, not change to an empty list,
- **except** if there's no requirements key in the config
at all; this is a bit weird, but let's make the tests
document existing behavior so we can notice if it changes.
- Setting 'id' (which changes the Global Storage key that
gets used) is a kludge when the existing module-instance
name can be used instead -- and **was** already used, as
a fallback when 'id' is not set. There's no point in having
two places to set a particular name.
- Rip out the docs for 'id' as well.
- Add documentation on the difference between single-selection
(the QML implementation) and model-selection (what the Widgets
version does).
- use updateGlobalStorage() for both single-selection and
model-based approaches, although the model-based one
needs extra parameters.
- complain about inconsistent settings and API calls (e.g.
setting a model and single-selection at the same time)
- pkgc -> packageChoice and similar for methods, variables
- document that this is the convenience value for one-selection
QML modules, not a full model
- use std::optional to keep track of which one is being used.
The Config object can hold all of the configuration information,
including also the requirements-checking parts. Move requirements-
checking configuration there, so it is shared and consistent
across welcome and welcomeq, regardless.
This repairs the test that expects the Config object to handle
**all** of the configuration, too.
- was filtering out the wrong URLs
- was not actually removing the invalid URLs
- extend API to make it possible to count / confirm the settings
- extend tests to demonstrate that API and the issues
- Branding, Settings, and ModuleManager may all be nullptr,
in which case the corresponding code shouldn't call methods
of those instances -- this is demonstrated by just creating
a Config object
- previously, updateSwapChoicesTr() wanted to be a static free function,
but it needs QObject::tr() ; drop the unnecessary parameter (since it
is a member function).
QString -> Id for translations in the external API, to avoid
accidentally converting a QLocale name (e.g. ca_ES) into a
Calamares translation name. This preserves special-cases
like ca@valencia and sr@latin.
- enforce consistent [PYTHON JOB]
- use CDebug() constructor, because the convenience macro's
introduce the function name -- that's the C++ function, so
it isn't useful for logging.
- when activating the page, the "guess" functions do their
work and afterwards the config is left in a "guessable"
state, but if the user makes a specific choice, then
the config leaves the "guessable" state and the user's
explicit choice is preserved.
FIXES#1744
- expose only intended API, guessLayout() becomes internal and static
- rename onActivate() since it was *called* for activation, but does
something totally different.
- Long and complicated, nested, lambdas are not convenient for reasoning.
- The debug messages from the innermost lambda have a totally useless
function name, which makes debugging harder.
- do not link (explicitly) to Calamares libraries, the CMake
functions do that automatically.
- while here, tidy and remove commented-out-bits
- while here, remove unneeded includes
- Modules and plugins don't need to mention libcalamares themselves
for linking -- we can do that automatically. Use the IMPORTED names
so that it works in Calamares main repo and external repositories.
- Complain about unknown module types.
- the message had been arbitrarily changed; change it back
- update (warning) message when there is progress in checking the
model, so it doesn't stay at "unchecked" until you change language
- minor clean-ups
Just have **one** Retranslator object, and install it as event-filter
(this needs to be done manually on a top-level widget) and use
signals / slots to do the actual work, rather than filtering
in multiple places and doing our own mediocre version of binding-
signal-to-lambda.
- The Config object owns the requirements model, and has messages /
strings describing the state of the model. Use that message,
dropping the duplicate message from the requirements widget.
- Re-jig to pass the Config object around rather than the model
that it owns.
- This does not work, because translation events do not arrive
(and the slot isn't called automatically either).
Rather than Config asking its (owning) ViewStep what the title
is -- all existing implementations have a prettyName() for that --
move the title into Config and re-do-the ViewSteps to use it.
Rename init() to something meaningful.
- the Page displays a simple message describing what the
summary is all about; Config has the same message,
use that. Needed some re-jigging to get the signals
and slots right.
- Create Config object, even if it's not used just yet
- Introduce onLeave() for the Page, better name than
(re-)creating the content (!?) when leaving
Repair the colors, since the basic Kirigami theme does not
look nice at all. While at it, refactor to put the colors
of the usersq module all in one place, so easy to changes
consistently (e.g. to Kirigami colors if you know your theme
is a good one).
The list suggests things are not-so-good because of recently-pushed
changes to the translations and teams haven't had time to react.
There are also some new duplicate languages.
Config classes, which intend to be shared between widgets-
and QML-based view-steps, should not tie closely to internals.
None of the ParserStatus methods are used in a meaningful
way (init() can be called by the view step).
(This assertion may be dialed back if the Config object is used
in the summary ViewStep, which will want to get at the widget
pointers, but that's for later)
- filter() returns the items for which the predicate is True;
we want to keep the subvolumes that do not have an explicit
partition already associated.
- need list() to hammer it back into a list for appending swap subvol.
function added to store selections from packagechooserq
line 103 in Config.cpp needs adjusting to restore working regular widget based packagechooser
prettyStatus added, made visible in packagechooserq only, ViewStep not altered in packagechooser for this yet
initial work done by Nitrux/Camilo Higuita in 2020, reflected in license headers
C++ adjusted to make it build & work
as noted in the inline comments e80618ef1c
there are quite a few errors in the C++, but it builds, runs and shows the correct output
will be used in summaryq, reading from widgets not an option
section probably better suited for Config.cpp/h, since quite a bit of duplicated code from
createSummaryWidget
In 942221c764 the fixed-setup
(with /@ and /@home) was replaced by the configurable btrfs
layout, but the default went away. Restore the two-subvolume
layout if nothing is configured.
Re-use the existing message about partition type and size,
since I don't want to introduce another message with all the
specifics; give a works-always message instead.
The check itself is also straightforward, avoiding all of the
nuances and technically-this-might-work cases: FAT32, 300MiB+.
FIXES#607
kirigami inlinemessages adjusted for password fields
coding style, break lines in variables
add closing button for root password inline message, needed bc of
re-use root password option does not remove all messages
bug introduced with Qt 5.15 KDE patches makes near impossible to set location
adding - 5 seems to fix, otherwise the coordinates label will have to be removed
Modules nearly always have a Config and either a Job or ViewStep
as their "top level" components. Everything else is implementation-
detail. The *partition* module was unusual in that those two
"top level" components were tucked away in subdirectories.
Shuffle them to the top: this makes it more clear that these
two files are there to coordinate the module.
The test-application injects a script into Python code
to render harmless functions in the subprocess module
(eg to avoid Python code from running the package manager
for real). There are cases, though, where that injection
should be skipped (eg because the whole point of test-
loading some Python is to check commands that are run).
Add a -P option to the test-application to do that.
warning messages implemented for user & host names
move root password option box inline with password section
adjust background color according to text.length
hardcode color instead of kirigami colors
usersq is now usable, sets user, hostname & password correctly on install
warning messages & color changes not fully done yet
The existing API required calling the one constructor with
specific pointers (nullptr for a partition-from-free-space)
followed by calling one of the initFrom*() functions. This
is fragile design.
Use tag-classes to distinguish create-from-free-space and
edit-another-freshly-created-partition cases, refactor
to merge the initFrom*() methods into the constructors
and factor out the shared UI creation.
Callers can now use the tag-class to distinguish. While
here, adjust both callers to use QPointer, avoiding some
very specific dialog-on-the-stack crash possibilities.
When a partition is set as "freshly created", the dialog was
passing in newFlags() as the **already-active** flags on the
partition; then the caller was setting those same flags as
"set these in the future", so that afterwards, no flags would
actually be set (because they're already active -- see the
first sentence).
Now, fresh partitions have no flags.
This is intended for consumption by QML; the ViewManager object
acts as a proxy for a handful of global Settings values already,
so throw in global Logger values as well. A QML module that would
like to read the log file (e.g. for tailing it as part of a
slide-show) can get the path via this property.
Sending a Once to a logger that isn't enabled should not "consume"
that Once; it's still available for a subsequent logger that **is**
enabled (useful if you're using more than one log-level in a function).
- fsName was a QString (a copy) so it could be modified;
- the modification isn't really necessary.
- While here, pick up new PointerSetter convenience class.
Avoids a broken btrfs installation in the face of missing
configurations, and makes testing a little more safe by
neutering parts of the subprocess module in Python job-tests.
This allows injecting arbitrary Python code before
the script of a module is even run. For testing
purposes, that gives us a chance to modify existing
(internal) modules before the script (e.g. to test
subprocess calls).
This is related to https://invent.kde.org/neon/neon/calamares-settings/-/merge_requests/1
which adds .. the default things from the example configuration to the
configuration file KDE neon ships. The default layout doesn't add
any subvolumes at all, which seems to be non-functional.
If nothing is configured, complain and use /@ as the lone subvolume.
PARTITION_UNSAFE is a debug mode. It is not used in
production, because it allows you to pick an install
device that would be dangerous (e.g. the current / device).
Existing code kept two copies of a list of pointers,
and deleted pointers from one of the lists and returned
the other -- which now contains dangling pointers.
Refactor by applying suitable lambdas to a single
copy of the list; this avoids copying the list so
there is no danger of dangling pointers.
The only acceptable versions of clang-format are 8 and 9 for now
(until another round of big-churn-from-formatting, at which point
we'll update the required version).
clang-format-9 says:
SpacesInSquareBrackets (bool)
If true, spaces will be inserted after [ and before ]. Lambdas
or unspecified size array declarations will not be affected.
clang-format-10 changes part of that to:
Lambdas without arguments or unspecified size array
declarations will not be affected.
This means that 9 will only allow `[name]` for captures, and 10
will only allow `[ name ]` for captures, so they ping-pong all
the lambda's in the codebase back and forth. Just don't.
Various clang-format versions have different defaults and
don't understand the same options, so adjust to having
files per-formatting-version to patch things up.
- duplicate the file to .base
- drop 10-and-later setting that was commented out
- specific setting for lambda-formatting (this seems to be the default)
- The log **file** got every QDebug object, while stdout only
got the ones of sufficient logging level. A CDebug object checks the
logging level before writing anything -- so those already were
consistent, but any qDebug() in the program (not cDebug()!) would
reach the writing-function anyway, and so log to the file.
Fix this weird inconsistency by checking log-level just once,
for both writes.
- Map QtMsgType -- used by qDebug() and qWarning() -- to levels used
by Calamares in a consistent fashion.
- Drop unused log levels (INFO, EXTRA unused in any Calamares code).
The generic-build step runs an install to the host system; for artifact-
generation, we need it all centralized in a stage/ directory. Do that
separately for the KDE neon builds that produce the artifact.
The bootloader model knows about both rows and
devices, so we can look up both at once. The
existing implementation as a non-member was rather
sketchy and wasn't used except as support for
restoreSelectedBootLoader().
If the pakcage manager fails in some way, convert to a readable
error message instead of leaking the exception to the caller
(which produces a traceback, which is harder to read and less
informative)
Widgets are easier to style if they have a name, and easier to spot
in the widget tree as well. Give the requirements-checker
parts meaningful names.
SEE #1685
- in legacy mode, *id* can have an effect and leads to
"packagechooser_<id>"; if unset, uses the the module
instance id instead, still as "packagechooser_<instanceid>".
- in packages mode, *id* is not used and only the whole
module Id (generally, "packagechooser@<instanceid>")
is used, but in packages mode there's no need for other
packages to mess with GS settings for this packagechooser.
When the module is loaded and the viewstep created, it doesn't have a
module Id **yet**. That is set after reading more of the configuration
file. It **is** set by the time setConfigurationMap() is called,
so pass it on to the Config object then. This means that packagechooser
modules can skip the *id* config key and use the module Id.
The model needs to be attached to the widget; because of changes
in the order that widget() and setConfigurationMap() are called,
the model is created earlier, but needs to be connected later.
- convenience method to install a (string) list of packages
(doesn't do the installation, but adds to GS the list, so
that the packages module can handle it).
- the %4 is left-over from the feature-summary string,
- replace it with ""; don't change the source string
because that will break translations right now.
- turn the translations-QRC phase into a function, just in
case other tests need translations as well.
- This CMake code might work as the base of translation-wrangling for
plugins (externally).
- don't pass the item IDs to packages module, use the
packages lists for each item
- document the item list in more detail (including the packages member
and new install-method item)
- convenience method to install a (string) list of packages
(doesn't do the installation, but adds to GS the list, so
that the packages module can handle it).
Rip out most of the ViewStep that deals with configuration,
move it to a Config object (not one that supports QML yet,
though), and massage the model a little.
The single-values *package* member in a PackageItem was not used,
so remove it -- to show that it really isn't used. This is prep-
work for putting the package name *back*, as multi-valued,
and using the *packages* module.
- if the queue is emptied, there was no usable data; set
failure to NoData rather than BadData.
- FetchNextUnless::done() is done only if the parameter is true (that
is, it's done!); otherwise should continue.
- drop the debugging line because that has already been
logged by the call to `runCommand()` that backs
`target_env_call()`.
- use the same (top-level) function rather than having a
function and elsewhere a very-similar method.
The code path for setting the locale / language automatically
emits currentLanguageStatusChanged(), but the code that updates
GS connects to currentLanguageCodeChaged(). This was altered in
the 3.2.28 release cycle. Since then, automcatic locale selection
wasn't setting *locale* in GS, so that a click-through kind of
locale selection would not set it; then the packages module
has no *locale* setting for localization packages.
The combination of status and code signals (machine- and human-
readable) is ok. Introduce a setter to the language that does
the necessary signalling, so that setting the language automatically
also DTRT.
FIXES#1671
The code path for setting the locale / language automatically
emits currentLanguageStatusChanged(), but the code that updates
GS connects to currentLanguageCodeChaged(). This was altered in
the 3.2.28 release cycle. Since then, automcatic locale selection
wasn't setting *locale* in GS, so that a click-through kind of
locale selection would not set it; then the packages module
has no *locale* setting for localization packages.
The combination of status and code signals (machine- and human-
readable) is ok. Introduce a setter to the language that does
the necessary signalling, so that setting the language automatically
also DTRT.
FIXES#1671
- Move variables closer to where they are needed
- Do the winnowing / selection always, but in unsafe mode return
the un-winnowed list of devices
- Massage build documentation a little
When loading the lists, no initial string-value was being
set for the model, layout and variant; the configuration
could pass right through and pick up empty strings instead.
If the user does not change the model, the UI would show
"pc105" but the internal setting would still be empty.
FIXES#1668
The machinery in `setConfigurationMap()` was just duplicating
checks already in place in the `getString()` and `getBool()`
methods, and there's no special need for efficiency here,
so prefer the more readable and short code.
("efficiency" here means "we're saving one method call in
case the configuration is not set")
- Get a signature on CHANGES at the start, so that the key
is cached by gpg; that way the tag-signing has the key, and
will not time-out (which breaks tarball generation, and
means that I need to **watch** the release script, rather
than fire-and-forget).
In 4ffa79d4cf, the spelling
was changed to consistently be "autoLoginUser" in the *users*
module, but that changed the Global Storage key as well,
and the *displaymanager* module wasn't changed to follow.
You'll need a VM with 2 disks to demonstrate:
- Configure Calamares to pick "none" as initial action on
the partition page (this is a safe choice),
- Enter partition page,
- No action is selected, and the next> button is greyed out.
- Click erase; notice next> is now available.
- Change devices, notice no action is selected, but next>
is still available. Clicking on it, though, does nothing.
When changing to "no action", update the next-button's
availability.
Avoid the extra indirection through the otherwise-unused
prettyGptType(const QString&), construct table of names
only on first call to avoid static-initialization order
(though that's not important here).
- There's still 49 enumeration values not handled, leading to
an annoying Clang warning, but there's just no **point**
in listing them all: that's what 'default' is for.
In 4ffa79d4cf, the spelling
was changed to consistently be "autoLoginUser" in the *users*
module, but that changed the Global Storage key as well,
and the *displaymanager* module wasn't changed to follow.
- Keep the project() version as literal, drop the script-mode changes,
to keep existing (weird?) build-and-packaging hacks working.
- Do switch to unified versioning-git-annotations CMake module,
do drop the "rc" from version numbers.
In particular, we need a separate Job class to set the label; this
is invoked after we formatted a partition, and when no other changes
to the partition have been requested in the Edit dialog.
The partition- and filesystem-label setting code was already there,
but not in the call to createNewPartition(); now we set the
FS label twice (once in the call, once afterwards)
When creating or editing a new formatted partition, allow
to set a filesystem label (16 chars maximum). Modify
the KPMHelpers to accept it as a new parameter. Partitions
created by default may get a meaningful label too.
The partitioning header 'FileSystem.h' is for KPMCore support;
it is already included by Global.h and guarded by ifdefs for
KPMCore. Do not unconditionally include it from the implementation.
- merge the (not-installed) date-stamp and git-version
files into ExtendedVersion, turn things into functions
- drop support for CVS (wut?)
- don't mention the branch, in git-versioning, because the
hash is enough to find whatever
- don't need external program to find date, use `string(TIMESTAMP...)`
- separate out the version into a variable (again -- this was moved **into**
project() long ago, but now there's a desire to have the value before
reaching the project() command)
- rename CALAMARES_VERSION_RC to something more sensible.
In current development, RC is effectively 0 (for a release)
or 1 (during development). It doesn't add anything to suffix
'rc1' to the version number. While here, remove the BUILD_RELEASE
check (because nothing ever sets it) and instead rely on
the RC setting instead to decide for long-calamares-version
The check for skipping a subdirectory was applied to Python subdirs,
not to C++ subdirs. This meant that a skipped module would notice
only in calamares_add_plugin() that it should be skipped. The **rest**
of the CMakeLists.txt in the to-be-skipped modules' subdirectory
was not skipped, and so a test might be added for a module that
was skipped. Depending on how the test consumes the code/module
under test, that might fail to link.
Example module is *initramfs*. Reported by yonggan.
- make the functies that take a GS* first-class
- use the convenience functions from JobQueue for the others
- inline so only the explicit-GS* functions are in the library
The skip-checking is now in the functions for adding plugins and
subdirectories, so that third-party building should get it
as well, for free. Since AddModuleSubdirectory and AddPlugin
use the newly split-out module, handling SKIP_MODULES and USE_*
consistently across module repositories is now easier.
While here, make accumulating-the-skipped-modules explicit.
There are two ways to skip building a module:
- SKIP_MODULES (individually listed)
- USE_* (pick one from a collection)
Move the handling for those ways to a separate function, so that it
can be re-used in the calamares-extensions module too, or other
external module repositories.
This change is relevant only if you build Calamares and some out-of-tree
modules (e.g. calamares-extensions) on the same machine where CMake
caches files in the developer's ~/.cmake/packages . If the user
packages registry kicks in the include files won't be found, and
the targets are not defined.
- offer a convenience method for showing a popup and
URL information and copying the URL to the clipboard
- use that from ViewManager (on failure) and DebugWindow (on demand)
- make the tools tab buttons along the bottom row
- show the global storage tab by default
This costs little screen real-estate, makes the tools much more
visible and useful.
- use load() to start loading
- the FetchNextUnless class is useful in more spots in
the loading process
- set status explicitly on success (otherwise, a failure in a
previous URL would leave a failure message lying around even
when the module shows something useful)
- m_queue was not initialized to nullptr, crashes
- split queue-is-done to a separate slot rather than a lambda
- prefer queueing calls to fetchNext(), for responsiveness
Require a ; after RETRANSLATE macros. They are statement-like;
this makes it easier for some of them to be recognized by
clang-format and resolves some existing weird formatting.
Now all the business logic is in Config, the door is open to
building a QML-ified netinstall module. I'm not sure that
would be worth it: packagechooser offers more space for a
nice UI and should be QML'ed first.
- do some additions and check they work
- drop the ";add" annotation on the source, this is not
needed in the current situation with only adds available.
For methods that log a bunch of things, and which want to
consistently use SubEntry, but don't know when the **first**
log entry is within the method, Logger::Once can be used
to log one regular message (with function info) and the
rest are subentries.
- If the module knows about a preset, then it should be registered
even if there is not a value set for it specifically; this avoids
complaints from isEditable() for fields that are known, but
do not have a preset. (Reported by Anke)
There was a mix of autologin and autoLogin, leading to confusion
in the code. QML is sensitive to this, so go to one consistent name.
(Although the names of the settings in the `.conf` file are
different again)
- this test would fail if the logfile already exists for
any reason (including "I just ran the test")
- remove the file before expecting an empty logfile
- improve messages; a missing logfile is not a "things cannot
work" situation, it's a warning
Although the example configurations shouldn't really be used
as a sample of how to configure **your** Calamares for your
distro, many distro's do just copy the examples. So leave
traces of the OEM-configuration settings in the example,
and give the standard configuration a 'nothing changed'
set of presets.
- you can still call set*(), eg. from the UI, when the field is
not editable. Although the code previously ignored the change,
this would lead to a mismatch between what the UI is showing
(the changed value) and what the Config has (old value).
Emit a changed-signal (notify) with the old value so that the
UI is changed *back* as soon as possible.
- warn about fields applied twice (program error)
- warn about fields not used (configuration error)
- add operator<< for "clean" looking preset application
Build up the list of known presets by what the Config-object
expects, not by what the Config file provides. This allows
early detection of mis-matched configurations.
Presets can only apply to Q_PROPERTY properties, and the
preset must match the property name.
This adds support for checking whether a field is editable;
Config objects should reject changes if the field is not
editable. There is an "unlock" setting to override the
check, although this is currently always locked.
This tests only the termbin ("fiche") paste by sending it
a derpy fixed string. Prints the resulting URL, doesn't
verify in particular.
It'd be rude to run this test too often.
- mark functions with STATICTEST so they can be compiled into a test
- move logfile-reading so we can call the pastebin-upload functions
with an arbitrary payload.
- The Paste API promises just a (string) URL back, not
a whole message, so return just the URL from the
abstract API and the concrete (fiche) implementation.
- Set clipboard contents from the UI
- Build (translated) message in the UI code
- have a namespace Paste with just one entry point, which will handle
untangling type &c.
This doesn't compile, but indicates the direction to take the API
- Use just type and url, since port can be specified in
a URL. Note that we only use host and port, not the
scheme (or the path, for that matter).
- Factor out understanding the *uploadServer* key to a function.
- get a QByteArray rather than going through a char[] buffer
- bytes-read is not important since the RE can only match if
there **are** that many characters.
- it might not be very current, and it's *probably* better to
use dbus-activation / kf5dbus, but let's not call it
deprecated until very sure that the dbus version does the
right thing.
- Add a toggle() to the debug-window manager, for convenience
- Make the manager available to QML
- Use the debug-window manager (code imported from KaOS)
Move the management of the (a?) DebugWindow to a separate
class, and hang on to that manager in CalamaresWindow.
This is prep-work towards making it available from QML as well.
The Quit button can have its own logic at a QML level for
show/hide. It **ought** to follow the *quitVisible* property,
but can do additional work. Here, document how a distro might
choose to hide the Quit button on the last page (generally,
that's the "finished" page).
It's possible to ignore the "user setting" for restart-now
and call doRestart(true) directly. This is intended for
use with specific UIs that make that choice clear for the user.
Hook up both [finished] and [finishedq] to the "traditional"
restart-if-the-box-is-ticked logic although the example
QML doesn't expose that box.
- Add function for mapping panel sides to an orientation (H/V)
- Pass that into the creation functions
This is prep-work for handling vertical navigation and horizontal
progress reporting cleanly.
- using the QML sidebar would not highlight the first step on startup,
only after next / prev would the highlight show up. Now, notify
when all the modules are loaded (and number 0 is active).
module builds & runs, config connections are not registering
no errors
finishedq.qml is offering a different option though, running commands directly in qml
plasma-framework executer is used for that
- move most of the business logic to Config
- make retranslate of the page more robust (e.g. changing language
after failure would restore the un-failed message)
There's still some bits left.
*If* the distro has GeoIP enabled and auto-selects the language for
Calamares, then Belarus now selects Russian, rather the Belarusian.
This is based on some personal input, mostly, and Wikipedia census data.
FIXES#1634
- the configuration is still duplicated in the widget, and
functionality still needs to move to the Config object
- the ViewStep is cut down to almost nothing
- the host system's /etc/group is being read, and that varies between
host OS versions; since I was doing today's release on KaOS, the
test was failing because of arbitrary differences between the
default groups on each Linux flavor.
FIXES#1604
(Admittedly, this fixes the problem only when there's Plasma Solid automount
present, and not any of the other kinds; but none of those have been reported
yet, and adding them into AutoMount.cpp is opaque to the rest of the
system)
- It shouldn't be necessary to explicitly .get() pointers for
logging, and it's convenient to know when a pointer is smart.
* no annotation means raw (e.g. @0x0)
* S means shared
* U means unique
- switch logging in job to VERBOSE because we don't want to be printing
pointers to the regular session log
- switch logging in test to VERBOSE to actually see the messages from the Job
- hook the test into the build
The popup now cuts down messages to a manageable length.
Hopefully the part that is preserved, will still show
something meaningful for the user (8 lines of text should
be sufficient for the kind of things we do).
FIXES#1613
- Although unique_ptr is only used when ICU is enabled, include it
always because it is likely that we'll use more unique_ptr
in the implementation at some point.
Ever since signed shim binaries for multiple architectures became
available, the shim binaries installed in Linux distributions have
been renamed to include the EFI architecture in the binary names.
This started in Fedora, but is now used in openSUSE and Ubuntu too.
Reference for shim binary names comes from shim spec in Fedora:
d8c3c8e392/f/shim.spec (_23-32)
- Some minor bits snuck in with the string-truncation code
- While here, make UPDATE_BUTTON_PROPERTY more statement-like
so it doesn't confuse code-formatters.
Writing `Logger::NoQuote{}`` has annoyed me for a while, so
switch it to a constant, like SubEntry, so it looks more
like a regular manipulator object.
The value inside a unique_ptr can't be opaque, it needs to be known
at any site where the pointer may be deleted. shared_ptr does not
have that (deletion is part of the shared_ptr object, which is larger
than the unique_ptr) and so can be used for opaque deletions.
The QLatin1String() might be replaced by char[], that trades one
initialization for two but with a simpler data section; this
probably is not worth profiling.
With Qt 5.15.2 (and clang), `k->first` works, but this breaks
with Qt 5.11 (and gcc), this is not available and the dereference
must be written differently, `(*k).first`.
- This kind of runs around the selection model on the view,
but we're drawing radio buttons ourselves **anyway**
and the list of themes knows which is selected / current
independent of the view.
- make ThemeInfo and ThemeInfoList internal, expose only
ThemesModel to the rest of the PlasmaLnF module
- don't build the widget anymore (needs to be replaced by
a delegate)
- also individual changes need to be signalled
- use QSignalBlocker to avoid spamming changes when calling
aggregate change methods
- refactor findById() so that also a row number can be
obtained, which is needed for the change signals.
- put a filter model in place, so only the themes with "show" set
are displayed
- rip out the messing about with widgets, soon to introduce a model-
based UI
This is the bugfix part (rather than the "clean up this widgets mess")
of issue-1573, ensuring that the LookAndFeelPackage setting is
saved to the target system config file.
- Need to update the variant that is in use, **and**
explicitly update it in the widget, in order to re-load
the keyboard image for the newly-selected layout+variant.
- Make explicit which one runs in the host, which one is selectable.
- Document *location* parameter in the selectable version.
- Tidy up alignment of apidox.
The lookandfeeltool does not (always?) write the LookAndFeelPackage
key that the KCM does -- and which this module reads on startup
to find the default LnF. This seems to be a regression in recent
lookandfeeltool versions (or in the KCM code that backs it).
Workaround supplied by jghodd.
Fixes#1573
The module preserves the extended attributes at rsync and the overlay
filesystem stores extended attributes by inodes.
The overlay filesystem keeps traces of the lower directory by encoding
and storing its UUID to the attribute trusted.overlay.origin. If the
index feature is on, that attribute is compared to the UUID of the lower
directory at every subsequent mounts and causes mount to fail with
ESTATE if it does not match.
This filters the namespace trusted.overlay.* by using the rsync option
--filter='-x trusted.overlay.*' to make sure the overlays extended
attributes are not preserved.
Fixes:
# mount -t overlay -o lowerdir=...,upperdir,...,workdir= overlay /mnt/etc
mount: /var/mnt/etc: mount(2) system call failed: Stale file handle.
# dmesg
(...)
overlayfs: "xino" feature enabled using 32 upper inode bits.
overlayfs: failed to verify origin (/etc, ino=524292, err=-116)
overlayfs: failed to verify upper root origin
Previously, the auxerror information was never stored, and
the messages were all un-numbered or un-explained.
Now, consume that information and store it when check()
is called, ready to be used when (possibly much later,
or after a translation change) explanation() is called.
Mount guesses the filesystem if it is unset or if it is set to auto,
thanks to blkid. That is the case for the bind mountpoints like /dev or
/run/udev in mount.conf. See `mount(8)` for more details.
The drop-down of zones was initially unfiltered, so you could start
in Europe/Amsterdam and the zones drop-down would also show Australian
zones; picking Perth would have weird effects, since Europe/Perth
doesn't exist and so you'd end up in New York instead.
- set the filtering region immediately, rather than only when the
region changes.
Various file writes were not being checked, and the code
was a bit tangled; specifically keyboardq did **not**
configure properly on KaOS and now seems ok.
The root mount-point can end with a / while the mount-point read from
the file /etc/mtab does not end with a /.
This leads to skip the unmounting of the root mount-point and causes the
removal of the root mountpoint directory to fail with EBUSY because it
is still mounted.
This uses the python functions os.path.normpath() to normalize the root
mount-point (i.e. to drop the trailing /) and os.path.commonprefix() to
determine the longest common prefix between the two mount-points. If the
returned prefix is identical to the normalized root mount-point then the
mount-point must be added to the list of the mount-points to unmount.
More generally, the python modules should rely on the os.path functions
to compare for paths instead of using strings. It covers this way lots
of corner cases (path with "//", "/../", "/./", ...).
- put the writing of each kind of file in its own block -- this should
become separate functions -- so that variables become more local
and debugging can be improved.
- while here, fix the error message for /etc/default/keyboard:
it would complain and name the vconsole file path if it ever failed.
- factor out the flags-we-want from the flags-we-already-have
- the use of ->activeFlags() meant that the state on *disk* was
being compared with the flags-we-want; if a partition was re-edited,
then you couldn't change the flags back to the state-on-disk
(eg. enable a flag, then change your mind and disable it).
- set the flags before refreshing the partition, because the
refresh checks for EFI bootability and that needs the new flags,
not the old ones.
- remove the m_defaultFSType from PartitionLayout, because it is
set on construction -- which is too early, before the configuration
has been read.
- make the default FS explicit in the init() calls which pass in
a configuration; this needs support in the intermediate
PartitionCoreModule.
- the "simple" constructor for PartitionEntry left the FS type
set as the constructor left it -- which is Unknown by default.
This leads to install failures in systems that don't set a
special layout but just want a single / -- because the FS is
set to Unknown.
- massage the constructor and consumer of the code, push
Ext4 FS in the tests and use the configured default in production.
The return of the call to libcalamares.utils.mount is never tested and
it may fail silently; this causes some mounpoints to be missing.
This adds a warning if mountpoint cannot be mounted.
chcon: failed to get security context of '/tmp/verity': Operation not supported
06:44:23 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
Running "env" ("mount", "-t", "unformatted", "/dev/sdb2", "/tmp/calamares-root-kv8dqgb5/tmp/verity")
.. Finished. Exit code: 32
.. Target cmd: ("mount", "-t", "unformatted", "/dev/sdb7", "/tmp/calamares-root-kv8dqgb5/tmp/verity") output:
mount: /tmp/calamares-root-kv8dqgb5/tmp/verity: unknown filesystem type 'unformatted'.
Some compile flags changed recently, triggering assert()
in the jobqueue when there is more than one. There's no
real reason for JobQueue to be a singleton, but it wants
to be. So clean up pointers a little more enthusiastically.
- Use classes to prompt lupdate to extract with a better
context (e.g. the class name, rather than plain "QObject")
so that the translation-lookup can use the named context.
- Add hard-coded "default" variant
- Add totally bogus Tajik translations, for testing purposes
This is the Wrong Thing To Do, but we'll do it for now: build the
keyboard translations into the executable. In the medium term
they should move to the modules that use them, with the re-vamp
of how translation changes are signalled.
Now that Calamares is compiled as C++17, we get this:
src/modules/locale/timezonewidget/TimeZoneImage.cpp:28:55: warning: out-of-line definition of constexpr static data member is redundant in C++17 and is deprecated [-Wdeprecated]
/* static constexpr */ const QSize TimeZoneImageList::imageSize;
The code doesn't match the comment: there are no by-ref captures
in the code, and the shadowing of parameters and local variables
is confusing. Remove one variable that is passed in as an argument
(and just pass the value as argument) and copy-capture the other
rather than doing weird argument passing.
- remove unused this captures from lambda
- rename variables that are short, cryptic, and shadowed
- remove documentation for parameters that don't exist
This commit adds the new configuration `swapPartitionName` to the file
partition.conf.
This option sets the partition name to the swap partition that is
created. If this option is unset, the partition is left unnamed.
- only widgets get language change events, so we need to
hook that up to the ViewSteps and inform the Config
object so that it can (re)load translations for the
keyboard data.
- Rename the "size" locals using "sectors" in their name. Size may be
confusing or not enough specific as it can be interpreted a size in
Byte.
partSizeMap -> partSectorsMap,
totalSize -> totalSectors,
availablesize -> availableSectors,
size -> sectors,
minSize -> minSectors
maxSize -> maxSectors
- Create a the new local currentSector to iterate over the sectors;
instead of using the parameter firstSector.
- Remove the variable end that does not help much; too many variable
already. Expand its expression instead.
- Introduces new constructors for PartitionEntry: copy constructory and
constructor with all attributes.
- Use the new constructor in method addEntry().
- The variant helper toString() takes a default value since commit
c9f942ad6 ([libcalamares] Add default value to variant helpers).
- Set the default value to 0 and simplify the retreival of size values
by calling the helper toString() and removing the temporary variables.
- The logic of the method initLayout belongs to the object
PartitionLayout. Move logic to that object.
- Use a single method initLayout in object PartitionCoreModule.
- Member m_partLayout in object PartitionCoreModule is no longer
allocated.
The translation happens whenever this code is run, which may
not match the language the user subsequently selects.
It also causes general problems with the translation,
since we end up with a possibly-partly-translated name.
This lands Artem's work on supporting non-ASCII layouts better,
which currently only applies to Russian layouts -- it works with
a table, so it is easy to extend for other layouts.
The QML and Widget steps now completely share the Config backend,
which is why there's so many commits here: the Widget page needed
to have most of its code ripped out, and the models for
keyboard data were broken in various ways and needed fixing.
FIXES#1211
- With debugging and untangling done, the lambdas are simple
and short, so return to using them. One point of improvement
might be to give the models suitable slots themselves,
to avoid even this indirection.
- Use the just-refactored XKBListModel to store the xkb key-value
pairs for variants, drop most of the complicated implementation,
store just a single list of values.
- Remove code that is duplicated in Config.
- Hook up UI for physical keyboard model, and back.
- For now, introduce some named slots with debugging output.
This makes debugging a lot easier since we have function names
to work with rather than anonymous lambdas
- Config already *has* everythind, but drop the useless copies
and duplicated code from the Page
- Plug the models model into the Page
- While here, document the model / layout / variant distinctions
The code doesn't fill the UI properly, and the drop-down
for the models combobox is not right, but at least the data
is shared.
- gcc (up to at least version 10) is worse at recognizing that all
cases have been handled, so it complains about all the switches
that cover enum values.
- both clang and g++ support __builtin_unreachable(); (as Kevin
Kofler pointed out) so we don't need the macro to do different things;
- the compilers have gotten better at detecting unreachable code,
so instead of inserting macros or fiddly bits, just drop them
and the unreachable code they comment.
- reduce the difference between clang and g++ builds, factor
common flags out of the CMake-if
- drop special boost-warning-suppression, we do that differently
most of the time in the affected source files
- if the partition size is invalid, then warn about it but do
not print the (uninitialized) size of the partition.
- shuffle code to continue earlier, allowing the "good path"
code to be out-dented.
The special setup for nicely-named groups which have a single
hidden subgroup containing the actual packages, has the problem
that there is a non-empty subgroups item, but this results
in zero actual children: then the number of selected and partly
selected children is also zero in updateSelected() and therefore
the item ends up unselected.
Special-case this to avoid unnecessarily unselecting the item.
Reported by Vitor L.
The status for an empty login name is '' (empty), for ok -- this is
so that there is no complaint about it. But it's not ok to
continue with an empty name.
The status for an empty login name is '' (empty), for ok -- this is
so that there is no complaint about it. But it's not ok to
continue with an empty name.
- The EXPECT_FAIL value "Abort" stops the test (I wanted 'if this
unexpectedly passes, raise an error' -- should have read the
documentation more closely).
- Set the shell in the config object, not just in GS.
- add a status member so the different steps can show progress
as the user is created and configured. The progress values
are hard-coded guesses as to how much work is done for each step.
- while here, reduce the scope of the global storage variable
This is somewhat experimental and weird; the idea is that bool
arguments are a lot easier to understand if there are proper
names attached, rather than "true" and "false".
- don't blank out the text in the progress bar if the job provides no
message -- just leave the last message shown. FIXES#1527
(There's no point in having more than one copy of those initcpio*
modules, so just use the prettyName()).
- when a job starts, look for status, then description, then name so
that **something** is shown as text in the progress bar.
- give *shellprocess* the possibility to change its own labels
through translations in the config file. #FIXES #1528
This improves the situation for jobs that do not provide
a status: their blank status does not overwrite the status
bar, and since (previous commit) the description or name
is used to start the job if the status is empty, at least
**something** is displayed.
SEE #1528
- os-proper may return an extra file after the device:
/dev/sda1:Ubuntu 19.10 (19.10):Ubuntu:linux
/dev/sdb1@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
- The API definitions are just the symbols to define; these
are variously added through add_definitions() (needs -D)
or target_add_definitions() (doesn't).
I think we had this (kind of) module a long time ago and it was
removed for over-complicating things; re-introduce one now that
KPMcore is used in 3 different places and all would benefit
from consistent API handling / defines.
- handle swapfiles when writing /etc/fstab in the target system
- special-case mountpoint
- since swapfiles are not a partition, take the setting out
of partitionChoices
- create the physical swapfile as well (there's no other place
where it would make sense)
This still won't help if there's one really huge file that takes
several seconds to write, but if there's a bunch of files together
that is less than a file_chunk_count but take more than a half-
second to write, update anyway
If there's thousands of files in a squashfs (e.g. 400000 like on
some ArcoLinux ISOs) then progress would be reported every
4000 files, which can take quite some time to write. Reduce
file_chunk_count to at most 500, so that progress is reported
more often even if that wouldn't lead to a visible change
in the percentage progress: instead we **do** get a change
in files-transferred numbers.
- The total weight is only needed by the UnpackOperation,
not by each entry.
- Use a chunk size of 107 so that the number-complete seems busy:
the whole larger-or-smaller chunk size doesn't really matter.
- The progress-report was missing the weight of the current
module, so would report way too low if weight > 1. This affects
ArcoLinux configurations where one entry is huge and one is a
single file, so weights 50 and 1 are appropriate.
When there are multiple entries, the overall weight of the
module is divided between the entries: currently each entry
takes an equal amount of space in the overall progress.
When there are multiple entries which take wildly different
amounts of time (e.g. a squash-fs and a single file) then
the progress overall looks weird: the squash-fs gets half
of this module's weight, and the single file does too.
With the new *weight* key for entries, that division can
be tweaked so that progress looks more "even".
- parameter instanceKey was left over from previous work that
special-cased the weight of Python modules.
- while here, consistently do `~T() override`
With 1 CPU, Calamares still spawns 9 threads or so: eventloop,
dbus loop, QML loop, ... many of those are invisible to the
application. Contention occurs on startup when the UI is constructed,
and we end up with the module manager creating widgets alongside,
or ahead of, the main window UI. This can result in deadlock:
- in CalamaresApplication::initViewSteps
- in QML imports
This is partly because the signal-slots connections get "deep":
from loadModules() we emit *modulesLoaded* which ends up showing
the main window in initViewSteps(). Avoid this with a QTimer:
drop back to the event loop and release whatever locks are held,
so the QML thread can get on with it already. Then the timer
goes off and the view steps are created.
- Give LVM jobs a dummy argument Device* so that they
fit the functionality of makeJob for partitioning.
For those jobs that already take an LVMDevice*, this should
be the self-same device, but that isn't checked.
* Use the minSize when the target storage is smaller than the sum of sizes
* Percentage-defined partitions should be computed after setting hard-defined ones
This fixes issues when 0 byte partitions were created when the disk is too small.
Also fixes an issue with percent-defined partitions being forced to be defined at the end of the disk.
- create dirs as needed (this will normally be done by
unsquash, but for tests with paths it needs to be done
by hand)
- log what file is being checked
- filePath() doesn't like the absolute paths we have
(they're absolute in the chroot, and existing code
just sticks rootMountPoint in front)
Document keyboard change for Turkish F layout, and document
the keyboard configuration value better, with alternate
path used in e.g. openSUSE
FIXES#1397
Some tests -- notably the keyboard module -- need to have the
QRC for the module loaded as well (e.g. because of data in the
QRC). Add a RESOURCES parameter to calamares_add_test()
like calamares_add_plugin() already has, to build the
resources into the test.
Keyboard test now passes, since it was missing the data for
lookups before.
- both changing the autologin and changing the user (login) name
affect global storage, and both may need to change the autologin
username; split it into a free function.
- the fullname change was bypassing the login in changing the
login name, **but** then it needs a back-workaround to keep
the "custom" setting off (when custom is off, auto-fill username
and hostname is active).
- after loading the config, fill GS already.
- when finalizing GS, get the autologin settings again.
- setup the visibility and initial checked-state of the reuse-user-
password-for-root near where it gets connected; do similar
for the require-strong-password
- squash the lambda slot into the regular slot: no sense in
connecting twice to the same signal with the same receiver.
- only connect config->ui once
- only connect at all if the setting is visible (e.g. when weak
passwords are allowed for the require-strong checkbox, or
when root's password will be written for the reuse-password)
- switch to QStringList as parameter, since consumers (that is,
the debug dialog, which is what this is for) are interested
just in the **names** of the jobs.
- to allow mutex locking in const methods, mark them mutable.
- *secretly* this is already done in the KF5 i18n modules,
so the resizefs was already requiring FindGettext.
- we don't actually use the gettext modules' CMake macros,
so explain why in the module.
- there's no need for a macro that is going to be used once,
especially if there's only one place it can be called.
- expand it in place and remove it from the installed CMake
module
once completed, this can be a fully functional (offline) locale selection option
worldmap.png no longer needed/in use
working is the stackview of the region & zones models
Timezone text bar shows correct timezone
currentIndex see comments on lines 65 & 139, not working
update of timezone text bar can't be tested if working as long no index is connected (see lines 93 & 168)
Still, already committing, since it does more then old Offline.qml, which had no function for timezone
Apply REUSE.software licensing tool across the codebase,
add complete(*) licensing information. Since we're touching
every file in the repo **anyway**, apply coding style too.
(* there are four files not licensed, but they will be
removed soon)
- point to main Calamares site in the 'part of' headers instead
of to github (this is the "this file is part of Calamares"
opening line for most files).
- remove boilerplate from all source files, CMake modules and completions,
this is the 3-paragraph summary of the GPL-3.0-or-later, which has
a meaning entirely covered by the SPDX tag.
For some dozens of files, adding license information in or
next to the file is unwanted:
- the translations are variable, and licensing information
embedded in them is removed on update; since the translations
are derived from the sources, blanket-license them as GPL-3.0-or-later
- FreeBSD packaging (ports) directories have a specific structure
.. and more cases like that. See the dep5 file for details.
- Mostly CC0 because they're not interesting
- formatting, git, travis, transifex
- Some BSD-2-Clause because of habit
- CMake and shell-script-like files
In spite of there being considerable documentation sometimes in the
config file, we go with CC0 because we don't want the notion of
'derived work' of a config file.
The example `settings.conf` is also CC0. Add some docs to
it while we're at it.
- the translations generated from public-domain files are CC0-1.0
- the files derived from Unicode tables are close to CC0-1.0,
possibly except that there is a FileCopyrightText line
- *AppImage example config*: this is old AppImage configuration,
basically unmaintained, but copied from the **other** example
config files which are CC0-1.0 as well.
- *Sample Linux distro*: The example Linux distro has a handful
of trivial files, a bogus `/etc/issue`, that kind of thing.
- The bash completions are GPL-3.0-or-later
- FreeBSD packaging information is BSD-2-Clause
- CC0-1.0 for the uninteresting version-headers
- GPL-3.0-or-later for the services
- add SPDX identifiers to Calamares C++ libraries and application sources
- add SPDX identifiers to Calamares QML (panels and slideshow)
- the `qmldir` is a list of names of things in the directory,
so CC0-1.0 it as "uninteresting"
- QRC files are lists of names of things in the directory,
so CC0-1.0 them as well
Some Calamares source files incorporate material from
3rd parties (unlike the 3rdparty/ dir, which is basically-
unchanged 3rd party source). Tidy up the FileCopyrightText
lines for those sources.
This is not an exhaustive effort.
There's lots of (YAML) test data that is just trivial configurations
for modules. Since the configurations themselves are **also** CC0-1.0,
and the tests are less interesting, license them equally liberally.
The build instructions are not that interesting, it's a toss-up
between CC0 and BSD-2, but because other CMake bits are BSD-2-Clause,
apply that to more CMakeLists. The copyright date isn't all that
accurate, but these are just inconsequential files.
While here, tidy up and get rid of some useless intermediates.
The .ui files are all GPL-3.0-or-later style, but it's
slightly difficult to keep licensing information in them:
it's XML, so an XML comment might work, but there's no
guarantee that safe/load will preserve them.
Put the SPDX tags in the <author> tag, so that it's visible
in Qt Designer.
- remove empty useless HACKING
- remove unused cppcheck.sh
- migrate the AppImage docs to the wiki (which doesn't moan about licensing)
- try a HTML-style comment in the RELEASE docs
The intended license for the CMake modules is BSD-2-Clause;
there's no desire to restrict what can be done with these,
and CMake modules are generally 2-clause licensed.
For proper REUSE compliance, untangle the lists of licenses
and place a single copy of each license in LICENSES/ .
The License-Identifier in each source file refers to
these licenses, and FileCopyrightText provides the context,
"above notices" and similar attribution data.
This was causing CI builds to fail, since WEBVIEW_WITH_WEBKIT
is defined only in the Config file, not on the command-line.
This crept in accidentally while trying to get rid of that
config file entirely.
Re-jig the module-weight calculations.
- modules can have a weight
- module instances can have a weight
- jobs, from the module, can have a weight
This is now configurable on a case-by-case basis, rather than having
C++ only as an option and a weird hack for unpackfs.
This is more a test-inspired hack than anything else: since signals
are delivered asynchronously, we can end up delivering progress
signals out-of-order, and then the signal spy lists them wrong:
progress goes backwards.
Insert a tiny delay between jobs to allow signals to be delivered
in-order.
- compute weights and accumulations beforehand
- mutex-lock structures so you can enqueue while running jobs
- simplify progress reporting calculations
- doesn't actually run any jobs
reflect changes from users/Config.cpp
corrected id missing capital
mirror UsersQmlViewStep.cpp/h with the users versions
connections are still not made
In advance of PR #1491, test loading and stringlist extraction.
- from code, extraction works "normally"
- for YAML data, the stringlist isn't actually a stringlist
- if the user password is reused (or not) then check the
status of the passwords against the new reuse-setting
- if the allow-weak-passwords setting is changed, then
check the status of passwords (both of them) against
the new weakness setting
As explained by Kevin Kofler and abucodonosor, the
implementer line can carry a bunch of different values,
but none of them are actually interesting. Simplify
the code.
- the way isPasswordAcceptable was being used was buggy, leading
to test failures (now fixed)
- don't expose the function, anyway: it's an implementation
detail for passwordStatus() which in itself is an implementation
detail for status notifications.
- avoid update loops by checking values before emitting *Changed()
- check validity of user and root passwords when asked
- if root isn't going to be written, or re-uses the user password,
defer to those status checks.
- The weight is the module (instance) weight, which can be
- the default weight of 1
- the weight specified for the module (in module.desc / the module
descriptor; this defaults to 1, above)
- the weight specified for the instance (in settings.conf)
The last of these "wins"; weights are constrained to 1..100
The weight isn't actually used in progress computation yet.
- a handful of modules had an unused *requires* key in module.desc;
this is probably from previous intentions around
prerequisites-testing. Since the settings were empty anyway,
they have been removed.
- [unpackfs] Compacted the way *requiredModules* list is written
- loads emergency, noconfig, requiredModules keys
- warns (and marks descriptor invalid) if there are unused / unknown
keys left over in the descriptor data.
- add fields -- all const, all bogus -- to the descriptor,
introduce a stub method to load the descriptor from
YAML data (e.g. read from module.desc)
- lighten the type-naming in Module a little, with usings
- In most cases, you **know** the table covers all the enum
values, and the extra parameter *ok* is just annoying.
Provide a convenience that doesn't distinguish empty
from empty-but-valid.
- move the enums
- expose the named-enum functions for them
- **start** replacing Descriptor with something stronger; this fails
zero tests so it obviously wasn't tested at all
This module allows the generation of the initramfs in Alpine Linux based
systems (excluding postmarketOS). Very bare bones, but then again it
doesn't need much. It uses the Alpine Linux tool "mkinitfs" to do the
job.
- setting the weight in *instances* should be different from letting
the default weight (of 1) stand; explicitly saying 1 should
carry some weight (ha!)
- any invalid instance key will cause a complaint
- "new" custom instances in sequence get a complaint, but
the instance description added to the list is valid
- there's no reason to ignore custom instances that are **not**
mentioned in the *instances* section: it may be useful to
name more that one even without distinct config files.
- no more weights in constructors; do that in fromSettings() only.
- simplify test to drop those constructors
- set config file also for "normal" descriptors; fix test
module builds, installs and runs, connections are not working yet.
UserQmlViewstep.cpp/h are from PR https://github.com/calamares/calamares/pull/1356
sections are commented out to make the module build, but help is needed to get those 2 files corrected.
config names used in usersq.qml are guessed from users/Config.cpp
debug window shows correct entries in GS, and under the module tab, usersq.conf is read
as should too. Running shows most config used in users.qml are not registered/wrong,
many entries like: qrc:/usersq.qml:228:13: Unable to assign [undefined] to bool
It is understood not all needed from the users module has moved to Config.cpp yet,
but doing the PR now, since it runs, doesn't crash cala and help is needed to further implement.
- expose, for testing purposes, the load-from-YAML-data part
alongside the public constructor that reads a YAML file
- add test for building the list of instances
- looks funny
- is hard to get clang-format to respect this; it's intended as an
access-modifier, but those are baked into the code rather than
being configurable.
- is probably rare enough that #ifdef is acceptable
- was getting multiple definitions of moc-related code due to automoc
combined with KDSAG having its own #include moc, comment-out the include.
- while here, simplify the CMake bits for building KDSAG
- was getting multiple definitions of moc-related code due to automoc
combined with KDSAG having its own #include moc, comment-out the include.
- while here, simplify the CMake bits for building KDSAG
- Requirement.cpp was there "just in case" the header grew
functions that need an implementation, but that seems
unlikely (the header is just a struct of POD).
- the scripts are BSD-2-clause,
- the generated files are CC0 (I'm not *100%* sure about the
derived file CountryData_p.cpp, which lists countries and
country codes -- it **is** extracted from CLDR data which
is not CC0)
- QStringList doesn't round-trip correctly; add a test to
demonstrate that.
- Fix existing test to **not** use QStringList, but QVariantList
(of strings), which is how other code would use it.
The above is **kind** of moot because nothing uses the YAML-save
function, but it might.
While here, fix another test: YAML-loading can load JSON just fine.
- add apidox to all the untranslatedFS() methods
- add the most-basic of untranslatedFS(), which works on a given
FileSystem::Type; this one can handle special cases where
Cala needs a different untranslated name than what KPMCore provides.
Resolve a long-standing annoyance. With the new model for TimeZones
and nicer data structures, along with consistent find-methods,
we can spot-patch TZ data to handle special cases of bad timezones
being assigned to obviously-otherwise locations.
- for the purposes of Calamares's nearest-location selection algorithm
for timezone selection, introduce spot patches: alternate markers
on the map to indicate "things close to here belong in this timezone".
- hide the implementation detail in the find() methods.
- Cape Town is in South Africa, so one might expect it to get South
Africa's timezone -- which is Africa/Johannesburg -- but Windhoek
is closer, so it gets that.
- Port Elisabeth is similar: Maseru lies between it an Johannesburg,
so it gets the wrong timezone, too.
These both illustrate how the limited resolution of the map, together
with the "closest location" lookup, can give poor results. For most
of South Africa, the "wrong" timezone is closer than the right one.
- The TZ widget uses a different coordinate system (mapping lat and lon
to pixel locations, and then calculating Manhattan distance from
that), so needs a different distance function.
- Simplify code: there's just one "closest TZ" function.
- introduce a distance function and use that, rather than coding it
inside the find() function. This is prep-work for unifying the
find() calls, based on various coordinate systems.
Support /etc/default/grub.d/ -- keep in mind that the **rest** of the
logic in writing a grub configuration file is unchanged, so 00calamares
may roughly override "global" or top-level grub variables like
GRUB_TIMEOUT.
FIXES#1457
- create directories for new tests ahead of the tests themselves;
this **can** still cause problems if a test is run standalone.
- if creating the grub-dir at runtime is necessary, be informative
if it fails.
- the default_dir was only stored in modify_grub_default() to
create the directory if needed; move that functionality to
the get_grub_config_paths() function (and drop the "s",
since it now returns just one).
Go over the locale module again:
- new models that avoid weird casts and inconvenient iteration
- shared timezone data
- simple sorting and filtering
- simplify the map / QML version
FIXES#1476FIXES#1426
- test insert, remove, emitted signals
- test loading and saving of YAML and JSON
This shows up a big bug in the YAML saving code (which was never
used, it seems, anyway)
- the loadJson behavior did too many notifications, and was likely to
deadlock; write directly to the map instead and emit only once.
- the loadYaml method did something very different from its
documentation or intent.
- refactor into some free functions (out of the lambda's for connecting)
- introduce new method to call from onLeave(), matching previous
widget behavior
- we can do GeoIP and GeoNames lookups, **or**
- use Calamares's internal GeoIP lookup and country / city hints.
The online version is much more accurate, but costs more lookups;
in these examples, set it all to "offline" and document what needs
to change (code edit) to use the online version.
It's probably a good beginner job to introduce a bool in localeq.qml
to switch the behaviors.
- Config has suitable strings for displaying TZ information.
Use them and automatic bindings. Don't update the strings manually.
- Suggest online or offline TZ lookups based on what the distro wants.
Edit the QML to pick online lookups (needs access to the geonames
service, though).
- Drop the variables that point at config and geoip: the Config
object has a currentLocation, which is filled in by both the
configuration and any GeoIP lookup -- it doesn't have city
or country information though.
- status is a longer phrase
- name is a short human-readable name
- code is the internal code
Code that writes its own "Timezone set to" messages can use
the name, rather than the status.
- when no location has been set at all, there's no sensible TZ
to report; just leave it blank. In *practice* you won't hit this
code from the Calamares UI before a location has been set, because
the Config object is instantiated and then immediately configured,
but from tests or unusual UIs it could be.
- needs some massaging because Config otherwise depends on
ModuleManager which is a UI class (for the Reasons),
but we already have a BUILD_AS_TEST define for that purpose.
- demonstrate a nullptr deref.
- The Config object now uses the re-done models and timezone data
- most of the properties of the locale Config are unchanged
- much less complication in extracting data from the zones model
It's convenient when e.g. QComboBox::currentData() gets the key
"automatically", and the default role for that method is UserRole,
so let the value of KeyRole overlap.
The (renamed) class TranslatableString keeps a key value
(e.g. New_York) and a human-readable version around; the
human-readable one is passed through QObject::tr() for translation
on-the-fly.
- The models are overly complicated: **overall** there is just one
list of timezones, and we need various views on that list.
Start over with an empty model of regions.
- there **is** another source of information about the CPU,
so in the test use that to cross-check what hostCPU() says.
NB: it's probably a good idea to fall back on the same file
in hostCPU() for better accuracy.
- get username, password etc. from the config object, not the page
- jobs now depend entirely on config
- handle logic of "what's the root password" in Config
- The configuration for writing the hostname (to /etc/hostname,
to /etc/hosts and possibly to systemd-hostname) is read-only,
because it comes from the config file and won't change after.
When CMake runs, configure_file() will clobber the config files in
the build/ directory, which is annoying during testing: you need
to keep making the same edits, or edit the source.
- Introduce new behavior: the config file is **not** overwritten unless
the source file is newer. This means that edits to config files
in the build directory are preserved.
- If INSTALL_CONFIG is **on** then the files are clobbered anyway (the
source is considered new regardless).
When CMake runs, configure_file() will clobber the config files in
the build/ directory, which is annoying during testing: you need
to keep making the same edits, or edit the source.
- Introduce new behavior: the config file is **not** overwritten unless
the source file is newer. This means that edits to config files
in the build directory are preserved.
- If INSTALL_CONFIG is **on** then the files are clobbered anyway (the
source is considered new regardless).
- add the "reuse user password for root" setting to Config,
make the UI page follow that setting.
- add the require-strong-password default and toggle settings to
Config; this is not well-checked yet.
On the widget / UI side, connect checkboxes only if they are
visible; refactor reuse-user-password-for-root settings.
- The language code "ie" is not recognized,
- "ia" is, and it seems to be the post-war variant of
Interlingue, so we may want to rename / relabel.
The testEsperanto test -- now split into scripts and
esperanto -- would have picked "ie" out of the list
because it does map to C locale.
- like Esperanto before Qt 5.12, Interlingue does not
seem to be supported by QLocale, so it gets turned into
"C" locale, which then messes up the default language
selection in the welcome page.
Move it to _incomplete until QLocale does support it.
FIXES#1475
The TODO said it was unused: it **is** used, but only in
a very limited scope. Drop it from jobs where it wasn't
useful (e.g. those that just return prettyName(), outside
of the partition module).
This builds some machinery so that we can create
a detector for member-functions (methods) named <whatever>.
Use the macro to build the machinery:
DECLARE_HAS_METHOD(myFunction)
then after that,
has_myFunction<T>
is either std::true_type or std::false_type
depending on whether T has a method myFunction.
- no need for the definition to be in public header, move to implementation
- while here, sort the members and private methods
- add a makeJob() to add jobs to the queue
- having a struct with an obtuse API for adding jobs-that-need-to-happen-
to-this-device is just not good for maintainability.
- break the build by making things private.
- The enum for install choice was copied into PartitionActions and
used in the Config object; its definition does not belong in the UI.
- Chase the renamings required.
- add an option to select what button should be selected when the
partitioning module is started; TODO: the actual functionality is
**not** implemented.
- drop the previously suggested name, which didn't get beyond the
comments-in-the-config-file stage (but which intended to do the
same things as this one)
- add option to schema already, even if it's not implemented.
See #1297
FIXUP conf
The encryption widget (passphrase for disk encryption) should show
ok / warning / error whenever the state changes; this avoids
it showing up first with **no** icon (it should show a warning
when both passphrases are empty).
Both the KPMCore and the ChoicePage -- asynchronously -- were connected
to the nextStatusChanged() signal. So if the core said next was true,
that could end up communicated to the ViewManager, enabling the *next*
button in the UI.
Changing to the *erase* page generally triggers a KPMCore reload,
which later emits a `hasRootMountPointChanged()` signal, once the
layout is applied and the disk gets a root mount point. So we'd
get a `true` from KPMCore, which -- because it was connected directly
to the signal to the VM -- would override any other considerations.
Hook up both signals to an intermediate slot that just recalculates
whether the next button should be enabled, based on the state
both of the Choice page and whatever else.
- drop groups from the viewstep
- note that the Config object should also be in charge of creating
Jobs (but then the de-tangling needs to be completed)
- add tests of default groups loading
Doesn't compile because QRegExpValidator is a gui thing.
The configvalidator has some extra Python dependencies. Cache
the restults of checking the dependencies (convenient for developers),
and also explain what's going on if the feature is switched off.
This is a developers quality-of-life fix: reduce the amount
of recompilation that is done after running cmake. Since KDevelop
runs cmake in the background regularly, this was causing 4 files
to be rebuilt every run that don't *really* need to be rebuilt.
Previously, we check for RCC support every single time CMake runs.
This is slightly wasteful, and it wasn't being done right anyway.
But it's moot because:
- Calamares supports back to Qt 5.9
- Qt 5.9's version of rcc (at least, 5.9.7) **does** support the
command-line argument `--format-version 1`
- Everything newer does too.
Simplify translations a little, too: just use autorcc rather than
building things by hand.
- The sources were in src/calamares but processed and generated
in libcalamares, which is weird at best.
- Generate an "extended" version header.
- Use the extended version in the logger and nowhere else.
- While here, minor coding style cleanups
The overall change here means that after running CMake, only
Logger.cpp needs to be rebuilt (if the extended version has
changed) and not a handful of other files that don't need the
full version number, but do happen to include CalamaresVersion.h
- Very rarely do we need the full-git-version of Calamares,
so split that into a separate header with a little trickery.
- In the "normal" version header, drop the full-git-version values.
This does about half of the move-settings-from-Widget-internals to Config.
By having the configuration **and** the business logic in a Config object,
we can hook up other UIs more easily while preserving the business logic.
(e.g. this is a prerequisite for QML uis, but also for scripting and
quickstart logic).
SEE #1462
- This is a half-step: the ViewStep shouldn't do job creation either,
eventually it needs to be the Config object, but this is better
than asking the widget (UI) to create some jobs.
- When updating login- or host-name, or the autologin setting,
set it in GS as well. This is a minor improvement over doing
it only when leaving the page.
- Since the Config object isn't complete, there are leftovers in
the widget, which has a fillGlobalStorage() for the not-jobs-related
bits previously in createJobs().
- since the configuration is in the UI parts, we need the widget still
to load the whole configuration (until the config object is complete).
Create the widget before doing configuration; this is wrong. But now
we don't hit nullptr derefs all over.
- make the HostName textbox just a view on the Config's HostName
- make the username and login textboxes view onto Config
- query the Config rather than the UI for job data
- delay construction of the Page (widget) until it's needed
- hand the Config object to the Page on construction
This is prep-work for putting the configuration information into the
Config object, rather than in the UI elements.
- most of the things in utils/ are in the CalamaresUtils namespace,
let Permissions follow suit. Chase the name change in the
*preservefiles* module.
- add an `apply()` function for doing the most basic of chmod.
Note that we don't use `QFile::setPermissions()` because the
**values** used are different (0755 for chmod is 0x755 in the
enum value passed to `setPermissions()`).
On the "Users" tab, the user can choose a username. It was possible to
use 'root' as username, which led to an installation error, because
'root' exists already.
Added a new check to the username validation.
Fixes#1462.
With PR calamares/calamares#1357 the label of the "Manual partitioning" option
was changed, which introduced several downsides:
* The label is shown for UEFI and for BIOS installations.
* The mountpoint of the ESP is and should be distro specific.
* The label always mentioned GPT, which is irrelevant.
* The label should explain, what the option does, and not, what
problems can occur under certain circumstances.
set index in i18n.qml to -1, old settings were just for reading from the bogus model
current model uses strings, so index fails to read from it. This fixes cala crashing on loading i18n.qml
- Expand the documentation, emphasize octal-vs-decimal
- east-const consistently in this file (most of Calamares is west-const)
- shuffle the is-valid bool to the end of the data members,
so sorting by size.
- already had methods for various kinds of broken-up data, but
not one for plain "region/zone" strings; having this makes
it easier for QML to report a zone.
- use the region/zone method from QML, so that clicking on the
world map updates the actual TZ in Config.
- get network status from the global Network object; document that
- get the strings describing the language and LC settings from
the config-object instead of roll-our-own
- use the model of supported locales from Config to populate listboxes
- connect selection of language or LC to the Config object
- remove stray and useless TODOs
- remove unnecessary empty overrides
- clean up includes
- drop all the code that is now in Config
Since the business logic (setting locations, maintaining GS, ...)
is all in the Config object, the ViewStep is remarkably simple:
hook up a UI to the Config, which in the case of QML is done
automatically.
- since the Page hooked up a model and changed the region-selection
**after** connecting to signals, it would reset the location
to Africa/Abijan (alphabetically the first timezone) during
construction. Don't do that.
- this doesn't do the lookup **yet**
- while here, refactor setConfigurationMap so it reads like a story,
with chunks bitten out into a handful of static inline void methods.
- read the *region* and *zone* settings; this duplicates what
the ViewStep does and is currently unused, but ..
- add new support for using the system's TZ (rather than
the fixed values from *region* and *zone*). This complements
GeoIP lookup.
This is the actual feature that started the long rewrite of
the Config object (so that all the business logic would be in
one place, usable for both widgets and QML).
FIXES#1381
- writing *localeConf* settings to GS can be done always when the
formats are set, rather than special-cased. The code
that handles the "special case" of no widget existing for the ViewStep
overlooks the other crashes that happen then.
- Since Config knows what jobs to create, just ask it rather than
keeping a copy.
- allow finer-grained control over whether-or-not to adjust the
timezone in the live system.
- handle some special cases at the point of loading-configuration.
- document the setting in locale.conf
- correct some documentation bugs
- adjust the YAML schema for locale.conf so it's legal YAML syntax
**and** validates the current file.
- since all locale changes need to be entered into GS anyway, this
is something the Config object can do because it is the source
of truth for locale settings.
- drop all the GS settings from the Page.
- remove the weirdly-structured prettyStatus and similar:
the Config object has human-readable status strings (three,
for location, language, and LC-formats) which can be
normal properties with signals.
- Implement prettyStatus in the view step by querying the Config.
- the language and LC settings migrate from page to config
- add API for explicitly setting language (which is then preserved
when clicking new locations)
- since Config knows what settings there are, it should create the
jobs to run later -- not the Page.
- this doesn't work yet, because the Config does **not** know what
the selected timezone is yet.
The Config object wasn't being used at all in the locale module;
reset it to empty and start using it in locale, so that
configuration functionality can be added to it as-needed,
and with the necessary refactoring built-in.
In 022045ae05 a regression was introduced: if no *slideshowAPI*
is specified in the branding file, Calamares refuses to start, with
a YAML failure.
Before the refactoring, we had `YAML::Node doc` and looked up
the *slideshowAPI* in it with `doc["slideshowAPI"]`. After the
refactoring, we had `const YAML::Node& doc`. The `const` makes
all the difference:
- subscripting a non-existent key in a mutable Node silently
returns a Null node (and possibly inserts the key);
- subscripting a non-existent key in a const Node returns an
invalid or undefined node.
Calling IsNull() or IsScalar() on a Null node works: the functions
return a bool. Calling them on an invalid node throws an exception.
So in the **const** case, this code can throws an exception that it
doesn't in the non-const case:
`doc[ "slideshowAPI" ].IsScalar()`
- Massage the code to check for validity before checking for scalar
- Add a `get()` that produces more useful exception types when
looking up an invalid key
- Use `get()` to lookup the slideshow node just once.
- previously, the first column (name) was sized to show the
names **that were visible at startup**, which fails when
there are long names hidden in groups that are not expanded
immediately.
- change the columns to resize according to the contents; this makes
the descriptions jump to the right as the name column gets wider.
FIXES#1448
- there are no consumers for checking-the-capacity-of-the-drive
This parameter was introduced in 3cd18fd285 as "preparatory work"
but never completed. The architecture of the PartitionCoreModule
makes it very difficult to get the necessary parameters to
the right place, and it would probably be better to put
a SortFilterProxyModel in front of a partitioning model anyway.
Since the display code can already filter on size, just drop this one.
- make the rectangles slightly larger
- align text to center of the rectangle
- make the rectangle fill out the column; without this, the
width would collapse back to 0 after a change in the model,
which would draw 0-width rectangles.
FIXES#1453
- continuations, for the console, no longer print the date + level,
which makes things easier to visually group and read.
- the file log is mostly unchanged, except it contains more spaces now.
- Only copy over branding files if they are newer
Typically I have KDevelop open while working on Calamares; if I
am editing settings in `branding.desc` in the build directory,
then every time KDevelop runs CMake in the background, my
changes (for testing branding things!) would be overwritten.
Don't do that.
For normal builds with a clean build directory, this doesn't change
anything since the target is missing; changing a file in the
source directory **will** copy it over the build directory version.
- fix the schema so the schema is valid json-schema
- the schema doesn't actually validate the *operations* yet
- sort the named backends (needs a double-check that the
list covers all the ones we currently support)
SEE #1441
- Don't do in code what is already done in the designer (.ui) file
- setFrameStyle() is difficult because it mixes different enums
into an int, which causes the warning from clang.
Improve margin handling.
There's a margin around the "central widget" in Calamares, which serves
to keep the contents away from window edges. This works for widgets,
which all have a content widget with a layout, but is a little weird for
QML components: the QML component probably has its own internal margins,
and the margin around it serves little purpose.
If there's panels (navigation, progress) around the central widget, the
margins also serve to keep the content away from those navigation
elements.
**But** if there are no panels, then a QML component still gets a margin
around it. Pretty much the only reason for a no-panel setup is that you
have a full-screen QML version of Calamares where the navigation is
"inside" each QML component. This could be the case in a customised OEM
tool built from Cala, for instance.
For this special case, improve overall margin handling by giving the
view steps some control over their own margins.
FIXES#1446
- Add access to the panel-sides membe of the view manager, and
calculate which sides are populated by panels (if any).
- Pass the calculated panel-sides to the view manager before it
starts adding viewpages, so they get consistent margins.
The signing key expired some time ago, and while I made a
new signing key, there's no indication that a different
key is being used. Update the ID for future signatures.
- Give classes a virtual destructor that need them
- Remove spurious ;
- Refactor addJobs() because that doesn't need to be in a class
- Remove redundant intermediate base-classes
- The USE_* infrastructure is only **inside** the Calamares build
tree (see `src/modules/CMakeLists.txt`) so there is no point
in referring to external repositories.
- Some variant helpers take a default parameter if the map does not
contains the given key or if the type mismatches. Make all helpers
behave the same.
- Initialize the attribute partAttributes to 0; it is a primitive type
and it is not initialized in some constructors.
Fixes commit c1b5426c6 ([partition] Add support for partition attributes).
- Move implementation of default constructor to cpp.
added missing components listed as ResponsiveBase, ListItemDelegate & ListViewTemplate
parts of which were on nitrux
keyboard.qml no longer uses buttons within ListView, can't work as buttons and have them visible
see https://doc.qt.io/qt-5/qml-qtquick-listview.html#footerPositioning-prop
set ListView as actually visible within a normal calamares window size
- If the 'no tracking' box is checked, then the way to uncheck
it is to tick some **other** box.
- It doesn't make sense to unselect 'none' and then have .. none
selected.
In clang-format 10, SpaceInEmptyBlock is introduced, and defaults to
true .. which is different from the earlier formatting versions did.
For now, refuse clang-format 10, and search specifically also for
clang-format-9.0.1 because that's what I have on my laptop.
At some point, switch in the config option and then require
clang-format 10 or later (because earlier versions refuse to
run with an unknown config option)
KDE neon does not do this kind of tracking -- although it was originally
requested by KDE neon, no server roll-out was done once the
privacy policy was thought out.
- give the on-some-checkbox-state-changed slots better names
- while here, refactor is-any-actual-tracking-option-checked
- improve other debug messages, to be a whole sentence
- QString to-integer members detect if an integer string begins with
"0x" (base 16) or "0", base 8; but QVariant members do not.
- QString: the C language convention is used is base is set to 0.
- Convert to QString and use its member toLongLong() and set base to 0
to detect integer strings begin with a prefix.
- These have **not** been fixed for validation, so the schema's themselves
will fail to load. This is a consequence of variations in JSON-Schema
representations through various drafts. Fixing the schemata is
fairly straightforward.
This gives us 19 new tests, all of which fail.
- Note that this is missing *languageIcon* so if that gets uncommented,
it will fail validation.
- While here decide that should be
right up front in object (mappings) declaration.
The config files have fairly extensive documentation but no
formal description; adding JSON-Schema into the mix makes it
possible to write a machine-checkable description.
- The size of a 2GiB partition (in bytes) is larger than the largest
32-bit signed integer; we hit signed overflow while calculating
2^11 * 2^10 * 2^10 and the test fails.
- Switch the whole table of sizes to qint64 instead.
- For testing purposes only, introduce a _qi suffix for qint64.
FIXES#1430
- The variables that are set for out-of-tree builds are prefixed
with to avoid name clashes; make the module-infrastructure
respect those instead of the in-tree variable names.
- .. and then duplicate the in-tree variables to the out-of-tree
variables, so we only need one set of module instructions.
Install all the relevant CMake, libcalamares and libcalamaresui
files -- config and headers -- so that external modules can be
created (again). This support had severely bitrotted, so
that the only effective way to add modules was to do so inside
the Calamares build tree. Now it's independent again.
FIXES#1428
- Calamares complains if this isn't set, so the example should
probably be 'safe' from that complaint. With 3.3 plans including
'fatal error instead of warning' this should be fixed on-time.
- All the headers go to relevant subdirs, but we don't keep
libcalamares and libcalamaresui apart.
- While here, remove unused variable from libcalamares CMake
- link the library privately -- the public API uses QVariantMap
- install FindYAMLCPP just in case
- add yamlcpp explicitly in the few places that really need it
(e.g. netinstall testing the parsing of netinstall.yaml)
- Add the Calamares CMake-modules to the search path automatically
- Export to CalamaresTargets.cmake and use namespace Calamares::
- Document imported targets
- Find Qt, because the translations machinery will need macros from that
- The installed lib links to IMPORTED libraries from KF5, so we need
to find them (again) as well.
Show failed requirements in one component, with a filter applied,
and with satisfied and mandatory (the latter has an effect on
can-we-continue, not on whether something is satisfied) colors applied.
FIXES#1427
- Do all the status indication in one component, but vary
the top-level message based on whether the mandatory
requirements are satisfied.
- Vary color and icon based on each requirement's *mandatory* setting.
When entering the page, en_CA maps to us keyboard, not ca_eng --
this will annoy those people who have that specifically set,
so it needs separation of "setting from GeoIP" and "setting
because system is already like that".
Not touched in the Config class because that's not used yet.
FIXES#1419
- Value is configurable (through the "selector" which is passed
to GeoIP lookups). This is convenient for tests so you can "fix"
the value that the lookup will return.
- The Radio's are replaced by CheckBoxes and some logic, so
that different tracking styles can be enabled independently.
None of the settings end up in the Config yet, though.
- Uses global storage to steer the jobs that are created, in case
the slideshow needs to be tweaked by percentages or whatever.
- While here, add some code docs and apply coding style.
- When loading QML V2, both loadQmlV2Complete() and changeSlideShowState()
lock the same mutex, introduced in e7f4479df1.
- Explicitly unlock when loading is done and we need to change the state
immediately.
- For testing purposes, it's useful to load a module externally
and then register it to the ModuleManager (this hands off ownership).
- Refactor overall module loading to use the exposed single-module method.
- QML files need to be searched in specific places; this was initialized
by Calamares, but not for the text application. Move initialization
into the library.
- fixes:
12:44:25 [6]: Python Error:
<class 'TypeError'>
'builtin_function_or_method' object is not subscriptable
File "/usr/lib/calamares/modules/rawfs/main.py", line 188, in run
item.copy(filesystems.index(item), len(filesystems))
File "/usr/lib/calamares/modules/rawfs/main.py", line 99, in copy
if libcalamares.job.configuration["bogus"]:
- The -s will run the slideshow with a bogus job-queue, allowing easier
testing of the slideshow. This is more convenient than having a Calamares
with an empty show and a bogus exec section.
- The -s option for running the slideshow / execution phase of
Calamares needs to create a bogus Module for the ExecutionViewStep.
- Previously, unless setDefaultFontSize() was called explicitly,
the default size would be 0, leading to unexpected and weird
displays (and a warning on stderr).
- If setDefaultFontSize() is not called, get a sensible size instead
(like defaultFontHeight() was already trying to do).
- When loading *view* modules, we always need a QApplication for GUI
bits, because the widget for a module is created is very early.
- If it's a view module, replace the application object with one
that supports GUIs; without the --ui flag, though, it will just
run the jobs.
- All the configuration lives in the Config object (or the
tracking objects that it exposes).
- Get data from the config object for the jobs; TODO: give the
jobs a less-clunky interface.
The UI isn't hooked up to the Config object yet, though.
- a single tracking type can be enabled for configuration in the
config file; each must have a policy URL. Class TrackingStyleConfig
is a base class for that kind of configuration.
- root_mount_point was used initially for logging c1a139995 (adding new
bootloader job options are to use grub for BIOS, gummiboot for efi set
extra mountpoint when efi is found)
- the trace was removed since 533031b3c ([bootloader] print() does not
log)
- The Python configuration tests sometimes need extra setup, so
do that through a CMakeTests.txt file in the test directory.
- Patch up existing tests:
- grubcfg needs /tmp/calamares/etc/default to exist
- rawfs won't work on FreeBSD because of differences in /proc
- drop the *discard* from filesystems-on-SSD in the standard example
configuration.
- keep the table **with** *discard* around for referece and explanation.
Remember that the example configurations are intended as **examples**,
to document available settings, and do not reflect a sensible
production configuration.
FIXES#1395
clean up obsolete lines in welcomeq.qml
add requirement section from welcome.conf to welcomeq.conf
data shows correctly in Recommended.qml, fails to show any in Requirements.qml if run without admin rights
This makes it possible to remove QML from Calamares, possibly yielding
a smaller, lighter installer; it takes with it the nice slideshow,
modern configurable navigation and the QML UIs built for various modules.
By default, WITH_QML is on and the "normal" feature set is retained.
- look for Qml modules only when WITH_QML is on (the default)
- look for Network, since that's pulled in only implicitly
- disable the QML Calamares models (modules/*q) if no QML is
enabled; longer-term plan is to merge the **pages** back to
the "upstream" modules, and have things be run-time switchable,
but that's not here yet. Also disable the notesqml module when
QML is off.
- reminder to make all the ABI-relevant WITH_* settings available as #defines
- move the compilation of KDSAG to the calamares executable, not the library
- when DBus activation is on, drop all of kdsingleapplicationguard
- It is the requirements model (checking) that reports progress, and now
the model is accessible (ask for it with requirementsModel(), make the
messages come from there.
The requirements-checker in the Welcome module was not connected
to the module-manager's idea of what the requirements are, but
the *next* button was. So you could get in a situation where the
welcome modules' requirements were met, but **other** modules failed:
no display of the problem, and a disabled *next* button.
Rip out the welcome module's requirements-checking model, move it
to the module-manager, re-do the signals between the lot.
- The architecture of letting someone build up a list of requirements
from data emitted by the ModuleManager is broken: if it gets loaded
later, it will miss data; passing around complicated objects is
no fun anyway. Get rid of it, on the way to "ModuleManager has
its own model of requirements".
- Give the ModuleManager a RequirementsModel -- that is the source
of truth about the module-requirements of the modules managed
by that particular ModuleManager.
- Let the RequirementsChecker operate on a given RequirementsModel.
- The requirements are collected by ModuleManager, checked
by an internal RequirementsChecker and changes to the
requirements state are all signalled from ModuleManager.
By connecting the requirements in the welcome modules' Config
only to their own configs -- and immediately checking them,
which is bad on its own -- we end up with a disconnect between
what the ModuleManager says about requirements, and what
the welcome modules report on.
Doesn't compile (but I need to get it off this machine)
- Prepare to implement a picture-based slideshow alongside QML
- Split QML loading into the slideshow component
This might be good prep-work for moving QML loading out of the QMLViewStep as well.
fully implemented:
* loading of a live map, ESRI based, zooming & dragging possible
* IP address is translated to map coordinates
* loading of the map centers to the obtained coordinates, with a marker set
* coordinates are translated to a timezone, label visible at bottom of the map
* mouse movement will show changing coordinates
* clicking on new location will center map there, marker moved too, timezone label adjusted
* hasInternet switch set to either load Map.qml or Offline.qml
not done:
* get hasInternet status
* fill the fine-tune 181n.qml with proper locale & language data
* connect the obtained timezone to globalstorage
comments are left in the various files for what needs attention/changes
Improve testing framework while adding tests to rawfs to double-
check that the conversion (for Python 3.3 compatibility) of
capture_output is correct.
- If a module has tests/#.global or tests/#.job, these are used
as arguments to a test-run of loadmodule (which reads them
and runs the module with that configuration).
- This makes the old python-loading test and test-runner entirely
obsolete, so remove them too.
- By default, try to use DBus service to keep Calamares unique
- The older implementation via KDSingleApplicationGuard is still
available, just not used by default.
- Calamares doesn't like to run multiple instances, since they would
interfere with each other (stealing disks from each other, for instance).
The single-application code tries to prevent that.
- For -d runs, for developers where presumably they know what they are
doing, the single-application restriction is annoying: especially if
you need two instances at once for some kind of visual comparison.
Drop the single-app requirement if -d is given.
- If the QML navigation panel sets a height, use that
- If it doesn't, use 48px (which *may* make sense, but like many
screen dimensions in Calamares doesn't take HiDPI into account)
- Give the demo QML an explicit height of 48
- This code has existed for a long time but never stored anything
to the Branding object, and the most literal slideshow (just some
images) was not implemented.
Region "Africa" zones # 52
14:25:19 [6]: .. Zone "Asmara" QPoint(445,183)
14:25:19 [6]: .. First zone found 2 "2.0"
14:25:19 [6]: .. Also in zone 3 "3.0"
- All failures were being reported as Timeout, which is confusing
when they are not. Introduce HttpError for the not-timeout
other kinds of errors.
- Add operator<< for RequestStatus for nicer error logging.
- The Config object can handle GeoIP loading on its own. Both
View steps that used this had a derpy view->setCountry() that
didn't really do anything with the view anymore.
- This forces the EFI firmware to boot the loader that was just
created, whatever the boot order set in the firmware setup (USB,
CD/DVD, HD...).
- It is safe to use the first Boot Entry listed in BootOrder as the
previous command creates the new entry and adds it to the first place
of the BootOrder.
- This is a good example of being overly clever in C++
- the whole API with an enum requesting a specific string is a bit weird,
although it makes sense from the 'might need more strings specified'
point of view.
- sometimes if you use external OEM modules you might have those lines already present
- by skipping them you won't have double lines when rerun the module in a later step
Merge in the documentation from Bill Auger and then implement
what it documents (this had been missing; productWallpaper was
an orphan setting).
FIXES#1380
- If we have a wallpaper, bung in an extra QWidget between the main
window and the panels (sidebar, nav and main) where we set a
stylesheet that displays the chosen image.
- things that can be done in the designer file should be there,
not weirdly repeated in code elsewhere
- drop the insertion of an extra spacer (why not include it in the
designer file?)
- shuffle all the connect() calls down to the end of the constructor
This commit adds the new configuration `efiSystemPartitionName` to the
file partition.conf.
This option sets the partition name to the EFI System Partition that is
created. If this option is unset, the partition is left unnamed.
- Use << Logger::NoQuote{} to turn off quoting **and** the space
- In practice, in Calamares we use this only around other processes'
output, where we want neither quotes nor spaces.
- the test checks that the default locale is C or en_US .. let's just
make it so instead of relying on the environment. This fixes tests
on my dev-laptop, which happens to be set to en_NL (with volapuk
date format).
- Although we long ago replaced the getPartitions implementation, the
test is still there, and on a machine with no /dev/sda (e.g. because
root is on nvme) the echo-awk-shell-pipeline can give an empty string;
this is turned into a QStringList{""} which has one element, while
the new version has 0 elements.
- Special-case the test that empty strings should be empty lists, rather
than 1-element lists with an empty element.
reads data from languagesModel correctly, debug added to see index changes
code cleanup
button layout improved
install info text added, better spacing of text
about button no longer commented out, 3 reasons:
- info provided by any about is standard, will be odd if it can't be found
- about.qml is a seperate file, can be completely adjusted
- not showing it takes away the options for new QML cala users to see what is possible with Loader, thus stopping new possible contributors
- This is a follow-up to d0c205c1cc6a2ae49935c92bfd52911b9a0d43f7;
I really don't know why static constexpr const elements that are
not referenced by address need to be defined separately.
The introduction of navigation panels made them taller, leaving less
space for the locale page's timezonewidget -- which then got
comboboxes overlapping it. That's weird from a QVBoxLayout point of
view, but the issue remains that the locale page is actually a
*smidgen* (2px) too tall.
- Massage a bunch of layout code to make the default navigation panel
30 pixels again, like it was. This is obviously fragile in the face
of HiDPI, but Calamares is weak there anyway.
- Rework the enlarge signals to make it possible to claim space, so
that if a page needs more space it's easy to get; because the locale
page is just a smidgen too tall, it won't trigger resizes right now.
- rename enlarge to ensureSize() and change the meaning from
"make this much bigger" to "make sure this is displayed",
which is easier on the caller to calculate.
- the navigation bar was set "too tall", leave it at the natural
layout height for this widget
- margins needed some massaging to give contents some more space
(contents has a margin, so it doesn't need more space above
the navigation bar)
FIXES#1369
- Rich package descriptions were easy to do; added some tests
as well; also make it viable to copy a once-tested "local"
file to the downloadable YAML format.
- This isn't something that Calamares can acutally fix,
so the test will be disabled later. After all, if
Brazzaville and Kinshasa are close enough that on the
map they are the same pixel, we can't move the cities.
- Merge all the format documentation into netinstall.conf,
where the example is given in full as an embedded
*groups* entry.
- Get README.md to point to the example.
- Fix up headers in netinstall.yaml, pointing to the
embedded example in netinstall.conf.
Timezones updated for these countries found on pixel detection tool
Dublin is in 0 (-1 needs editing)
Gibraltar should be 1.0 (0 needs editing)
Guernsey and Jersey are in 0 (1.0 needs editing)
Lisbon is in 0 (-1 needs editing)
Vilnius should be in 2 (1 needs editing)
- QImage needs Qt5::Gui, so this isn't a guiless-test; it can use
the offscreen QPA, though.
- Check that the images are all the same size
- Debugging / check code removed from timezonewidget
- The idea is to check all the TZ images for consistency, like
TimeZoneWidget::setCurrentLocation() does when DEBUG_TIMEZONES is
on; a zone-pixel should be set in only **one** image.
The test so far is just a stub.
- Make all four DEBUG_ flags actual CMake options, rather than
stuffing some of them in the rather-peculiar _enable_debug_flags.
Each debug option turns on suitable compile flags in the module(s)
that are affected.
- When writing YAML, given a float **always** write
some decimal digits (e.g. "1.0" rather than "1")
so that the type of the written-out thing stays
float.
- Avoids test failure with the sample `welcome.conf`
file which reads 1.0 and would write out 1, which then
led to type differences.
- Handle qlonglong explicitly
- Add a fallbackfor things that convert to qulonglong, to
avoid these remaining integer types from hitting the
very end of the if-chain, and being written out as
the **string** "<typename>"
When one of these common names for the netinstall page is used,
it gets pulled out of the standard translations, so that it
doesn't have to be translated in the per-distro config file.
These labels are common enough that they make sense for
everyone to have lying around.
FIXES#1367
(I say "fixed" but of course it's going to depend on the translation
workflow to make these available)
- In production, cDebug() might not show up, so the log will not
contain the lines saying what program is being run;
- Errors should at least mention the program name, but "env" or
"chroot" is not useful, so pull that from *args*, which is
the command we actually want to run.
- an empty command isn't going to work (although it might successfully
run chroot or env in the target system, that's not useful)
- while here, move variable declarations closer to their use.
- Slice overall progress into chunks, with each chunk of equal size
(as long as we have no overall count information) and place
the progress of the current chunk into its own slice.
- The entry knows where it should be mounted, and can remember that
- mount_entry() didn't use self, so made no sense as a method
of the Operation class
probably due to dynamically loading items
regionModel now lists, zonesModel only lists one delegate, but
working on QML modules can now continue without crashing cala
This doesn't actually **work** though, the QML uses older Calamares-internal
APIs and uses a ResponsiveBase that we don't have. Merge it mostly for
the Config and model changes.
FIXES#1355
- Add some extra checks for validity of m_currentStep (an index)
- Start off with explicitly invalid index, and keep it so until
loading is complete; this prevents the situation where quit-at-end
gets triggered after loading the very first module.
- io.calamares.modules doesn't exist
- ResponsiveBase doesn't exist
The module is now non-functional, but at least it loads and renders
a list of regions and zones.
- name default / example QML conventionally
- copy QRC from keyboard -- the QML needs to be included in the QRC --
since we don't want to have the QML in the keyboard module.
- follow branding settings, taking the panel-sides into account
- drop fixed width and height for QML parts
- give panels a minimum appropriate-dimension if they don't have one
This allows, for instance, putting both Widget sidebar and QML navigation
on the left-hand side of the window.
- Introduce an enum for panel-side
- Expose this to QML -- I can imagine that QML panels need to know
which side of the Calamares window they're on.
- Refactor loading the setting into a method that handles both
flavor and side
- There's no real reason to force the sidebar left and nav at the bottom,
certainly with QML supporting more layouts and being more flexible,
so document a mechanism to place the sidebar and navigation along
"edges" of the Calamares window.
- With an empty list, the question is meaningless
- .. and we called this with an empty list while constructing the
ViewManager; if quit-at-end is true, then this would terminate
Calamares immediately because the list was at the end.
- put signals in conventional place
- remove const int& parameter, that can just be int
- drop oddly-guarded code (that leaks memory); if the index (row)
being passed in, it's probably best to just crash
- remove unused signal warningMessageChanged
- Now the back button should be done by clients as well
- Refactor in CalamaresWindow to avoid leaking local button pointers
to surrounding code.
- Add macro UPDATE_BUTTON_PROPERTY for convenience in ViewManager
(ugh, macro) to change a value and emit corresponding update signal.
- add properties for the next button (enabled, label, icon...)
- update those properties as normal
- connect to the properties in the UI implementation
using Loader, can be reused for other widgets conversion
leave onClick example with full path, commneted out
title text for About is hardcoded, discuss option to make this configurable in welcome.conf
background color hardcoded, tested to work well in dark themes too
- since we've got two blocks of code copy-pasted, which both
decide to call one or the other of two member functions based
on a flavor value, turn that into a templated function.
- passing member functions looks a bit weird, and calling them
is syntactically surprising, but it cuts down the code a lot.
- the checker only collects and calls requirements; it has no
UI component, and only manages data (and a thread to do the
checking). Move it out of the UI library.
- this function lives in Module -- and is the only thing typing
Module to the ViewSteps and JobTypes. Split it out into its
own funciton. Nothing else in Module needs to befriend the
ViewSteps, so we move the friend declaration around a bit
as well.
- while here, apply coding style.
This is prep-work for moving module to libcalamares.
- drop the current and completed roles, and expose only
the currentIndex. QML can use the QObject property on
the model, while QWidgets can call internally through
the model's data() function.
- we don't need to provide role names for this, so drop that bit.
- simplify the delegate code while here.
- Groups inherit slightly differently: if a subgroup **explicitly**
configures criticalness, use that. It would be weird, but possibly,
to have a non-critical subgroup of a critical group.
- An unselected group with (some) selected subgroups was not
displayed as (semi)checked -- it was unchecked, because
its checked-ness was not updated based on the children.
- the `parent` when installing a translator was not used, so drop it
from the API. Chase some uses of the API, but leave welcome-modules
broken: there's a merge of those coming.
- isEfi only used meaningfully once
- if (isEfi) followed by if (!isEfi) can be simpler
- create bios-but-not-GPT strings in one go
- mark TODO that this should warn only if needed
- use weird * notation for branding-strings
- In some cases, it makes sense to close Calamares automatically
when it is done. Set *quit-at-end* to do so -- although this
probably also means you should remove the *finished* page.
- It's annoying to have 100% progress reported (from the processing
of list items) and then have another 3 seconds delay.
Unrelated to the issue-at-hand, but spotted in testing.
- while the queue is executing (the thread is running jobs) the
isRunning() method returns true.
- re-work some internals to reset isRunning() before emitting
finished() signal.
- Instead of loading all in the constructor, provide a public
setupModelData().
- This allows creating the model and setting it for UI, before
the load completes.
- Add initial definition of Config object, which will extract the model-
setting and loading code from the page, and which is also prep-work
for a QML version of this module.
- While here, remove superfluous code
- For a static list of selectable packages (e.g. what you might otherwise
use file:/// for with a static file on the ISO) you can now stick the
list in the config file itself, simplifying some setups.
- Also saves faffing about with network.
SEE #1319
- `local` is supposed to read from the config-file, rather than
externally; this simplifies examples, makes it easier to have
multiple netinstalls, and condenses the documentation.
- Check groups
- Check whole treemodels recursively (this is not in PackageTreeItem,
because that explicitly ignores the tree structure).
- Also a stub of checking example files (from the src dir)
- Just some simple tests for the Items
- Test creation of package group from variant
- This needs Qt5::Gui to link because QStandardItem is a GUI class,
although we can run the tests without a GUI.
- This doesn't compile right now.
- The nested class ItemData doesn't do anything useful or
meaningful that having model items with the right data wouldn't.
- If we're converting a YAML map to a QVariant (Map), may as well
express that in the types. This makes the return from, say,
`yamlMapToVariant()` cheaper, but incurs conversion in
`yamlToVariant()` .. previously the place for costs was
swapped around.
- For those cases that want-and-expect a Map, or List, this makes
the calls slightly cheaper. For the generic case, the costs move
around internally.
Pull in the instance-weight changes and type-improvements,
but not the part where special-casing of unsquash is dropped:
weights are still per-job, not per-module.
- can't convert lambda-with-captures to a function pointer (Clang 9)
- instead, use a context property .. QmlViewStep already sets a
"config" property with the Config object, but WelcomeQ wants it
as another name as well.
- this avoids registering the Welcome object across all QML pages,
as well.
NOTE: needs to have the QML adjusted for this change.
- Replace a map-of-strings with a class type.
- For now, doesn't compile.
- Intention is to construct from a YAML / QVariant from the
*instances* list in `settings.conf`.
- Refactor into a support method and two API points
- Use std::transform for doing-things-to-a-list
- Add searchQmlFile that only takes a name, for
non-modules to use.
- Registration of QML modules may need to be done
for more parts of Calamares. Move into the library,
out of the model.
- Register for QML when using the QML sidebar.
- This is utility code, so it can be in the QML "service"
from Calamares, rather than in the QmlViewStep itself.
That makes it usable for other QML bits as well.
- The name is just the module identifier, and now we
search for *m@i* and also *m* from that identifier,
the name becomes much less important -- and it
can be set from the config key *qmlFilename* as well.
- To avoid name-collisions in otherwise well-behaved
modules and configurations, make the QML settings
more specific:
search -> qmlSearch
filename -> qmlFilename
- Having a ProgressTreeModel that does nothing but
proxy to ViewManager methods is kind of useless.
- Move the relevant code from ProgressTreeModel to
ViewManager.
- Remove now-unused ProgressTreeModel.
- The model is a simple list, not a tree (it may have been in the
distant past).
- All the information needed comes from the ViewSteps held by the
ViewManager.
- The delegate and fake-step handling was never used.
- Introduce convenience methods getString(), getBool() to pick
out an entry from item definitions in YAML format.
- Apply coding style.
- Pick up the "expanded" property as well.
- Use normal translation framework. The EncryptWidget was the one place
not using the "usual" translation framework, but rolled its own.
- Emphasize that the checkbox-state (checked-ness) is the parameter,
not a state of the EncryptWidget.
- All other instances of UI classes from Designer use a pointer-to-UI,
not multiple inheritance.
- Convenience method for setting the pixmap in response to
changes in the passphrase
- Tighten up types: enum -> enum class
- Reduce the scope for int-confusion by using an enum-class for
the encryption state of the widget
- Include UI implementation header only in .cpp
- Apply coding style
- Update copyright
- When Python modules emit progress, update their status message
by calling an optional pretty_status_message() in the Python code.
This is polled (later) by the execution progress bar to display
the message.
FIXES#1330
- the strange construction of Helper and treating it as a singleton
can be factored out into a separate singleton-handling instance()
function. The Helper should never be destroyed.
- when a single function does more logging, it generally marks
those as subsequent debug-messages (with Continuation, or SubEntry)
and we don't need to print funcinfo for those, since it was already
printed the first time.
- there's no string representation for a QVariantMap, so it
won't be converted; in *debug* output it looks like there's a
string there.
- off-by-one when diving into compound selectors, spotted by
test, now fixed.
In order to test some of the internals, split them into Binding.h.
This makes the interface visible for tests. The implementation
still lives in the same place.
While here, adjust the test to the changed **example** which
now lists an additional variable.
- When a Python module calls utils.debug(), there's no point
in logging the C++ funcinfo that passes the parameters on;
don't use cDebug() with its attendant magic.
- Warnings, errors, don't get funcinfo, but regular cDebug()
calls do. Other special-cases, like calling Logger::CDebug()
constructor explicitly, don't get funcinfo either.
FIXES#1328
- Allow logging any QList type (needs explicit call in usage).
- Add a DebugList inheriting from DebugListT to keep existing
code that logs QStringLists.
- For Calamares 3.3, consider using C++17 and class template deduction.
- This bug has been here since f233cac7a1,
where a check for isSet() (of the -D option) was dropped. So since then,
Calamares has always been running with full logging (-D8) on.
- The recently-added "easter egg" of showing the debug-button when
log-level is 8 (to allow debugging-in-production) trips over the
default-log-level of 8, so the debug-button is always visible.
So, minor bugs in the debugging-setup, combine to show a debug-button
when there shouldn't be one.
FIXES#1329
- The manpage for umount says that -R can only be used with
a mount point (e.g. /usr/local) and not a device name;
this makes sense because a device might be mounted in multiple
locations, but the mountpoint (and things mounted under it) lives
in the filesystem tree.
- Existing code tried to unmount -R the device, not the mount point,
and so always failed; leaving things mounted that shouldn't.
Unset GRUB_SAVEDEFAULT if / or /boot is in btrfs or f2fs partition. This avoids the error "sparse file not allowed" at boot time. Btrfs and f2fs do not support saving default entry in grub.
- because mount() returns an exit code, and 0 is "success",
the if (!code) was backwards: when mounting succeeded, the
TemporaryMount object thought it failed.
- This leads to temp-mounts being left *all over* the place
from os-prober and fstab-handling.
- See editorial in the code-comment. Still need to test that
chroot(8) doesn't need a full path, otherwise this will
go to /usr/bin/env udevadm to force lookup (redundantly
if not in a chroot)
- !failed() also means "didn't write the file because it already
exists", which is sometimes acceptable -- but not here.
Use the more-strict bool() conversion, which is only when
the file was actually written.
- Unconditionally **not** overwriting the target file isn't an option:
writing hostname, for instance, expects that to be done even
if `/etc/hostname` already exists on the target filesystem.
- Make tests more resilient: do them in a temp-dir, and clean it
up after successful tests. This was prompted by tests failing
because of things hanging around in /tmp.
- Follow original patch from Gabriel Craciunescu: just drop
the *bufsize* parameter and stick to binary reads.
Text mode was associated in my testing with multiple hangs,
which didn't show up during binary-reads.
- By the time the GS is actually written, new (for partition state)
is always false. So "new" is the wrong thing to track. It should
have had a better name anyway,
- We store custom properties on the partition objects to indicate
what happens to them; use those properties (instead of state,
as done originally), call it "claimed" to indicate that the partition
is part of this installation.
For now, only new (as in, formatted, created-by-us) partitions are
claimed.
- The effect here is that only "new" swap will be added to the system,
so in erase-disk installations, or manual partitioning.
- Install-alongside and replace will now **not** claim the swap already
on the disk; I think we'll need another UI knob for that one.
FIXES#1316
- `createPartitionList()` is called for the summary widget (via
`prettyDescription()`), and from `exec()`. Only the latter
actually *writes* to Global Storage, so it's misleading to
think that the pretty-printed version ends up in GS.
- This makes the "new" key useless, since by the time `exec()` is called
the partitoons are no longer new.
- These tests don't actually test anything in this specific module,
they do test CalamaresUtils::System.
- Wrangling System and JobQueue and GlobalStorage instances is fraught
Use regular translation machinery to support and help out translations
from the config files. This reduces the need to do all the translation
in those files -- some of it can be shared with the regular TX workflow.
- Allow TranslatedString to get a context parameter; if it has
one, it will try to use the regular tr()-infrastructure
**as fallback** for the translations from the config file itself.
- This makes it possible to offer -- and translate -- some "standard"
phrases in the module, while allowing the config file the knob
to change strings. Using one of the standard strings gets translations
for "free", while introducing something entirely new means sourcing
translations for it as well.
- The model always has two columns, and the column names are always
the same. We don't need to specially set headers for that.
- Use QCoreApplication::translation() to re-use the existing
translations and avoid creating "new" strings (in a new context).
- Now that multiple netinstall pages may be supported, it's annoying
that they all have the same name. Copy the approach from other
modules (e.g. notesQML) of having the sidebar and other labels
configured in the config file.
- Since operations are added each time you leave this page,
the existing operations (from a previous visit) need to be
cleaned up. With the old setup of only **one** possible
set of operations, this wasn't a problem. Now, merging
in operations is necessary. Implement that by looking for
the *source* property in an operation.
FIXES#1303
- Different libraries should have different EXPORTs, so that
you can IMPORT one while building the other. Reported (and
kindly explained) by Kevin Kofler.
- Stick to one header file, though.
While here, update copyright on file.
- Having the widget do creation ties the step heavily to that UI;
start moving towards a state where we have a Config object (not
here yet; it still queries the UI part) that moves data around
between UI and ViewStep.
- This makes linking easier,
- Adds the right includes (needed on FreeBSD),
- Lets us drop silly GUI setting for non-GUI tests (I think this was
a side-effect of compiling on FreeBSD, where UI would pull in
/usr/local/include).
- Let's just have one header definining export- and visibility-
macros for Calamares. They are still selected based on the
export flags (*_PRO), just defined in one header instead of two.
- The scattering of DLL export macro's is kind of useless;
there are several headers, and then the export macro isn't
even applied consistently. Just drop the one for UI exports,
which was only used in libcalamaresui.
- If the test failed, you'd get a cryptic message like
FAIL! : NetworkTests::testPing() 'r' returned FALSE. ()
So rename the variable so the failure mode is more obvious.
(Could have used QVERIFY2() instead, this is simpler)
- Use the createTargetFile() convenience functions to do the
actual work.
- This probably involves more copying around of buffers, since it's
creating one big QString and sending that off, rather than writing
little chunks to a file, but I feel this is worth the code simplification.
- Drops all the error checking for creation, though, because the API for
createTargetFile() lousy.
Introduces a "partitioning service" into libcalamares,
shuffles a bunch of things into it, tries to help out
with settling the system between partitioning actions.
- explicit use of user-visible names in EditExistingPartitionDialog
- consistent conversion of config-values to FS names (user-visible).
The GS value comes from the ViewStep, and should always match
something -- it's already converted to the canonical un-translated
so the type should be good.
Because getting the untranslated name of a FileSystem is something
that needs doing consistently, add some functions for that;
it makes it easier to spot places where that isn't done.
Probably doesn't compile, and needs extra documentation.
- The config context object should be set earlier, otherwise
QML code will try binding to a non-existent config already
- Document that QMLViewStep::setConfigurationMap() parent implementation
should be called **last**, at the end of the subclass implementation.
- Using Branding::ImageEntry, when ImageEntry is an enum class
defined *in* Branding, is superfluous, and it also confuses
moc; the enum type isn't recognized from QML.
- Take the Python wrapper for GlobalStorage out of the GlobalStorage.h
header and add it to PythonHelper instead, saving some work in
all the cases that only GS is interesting, not the Python bits.
- Physical memory can't be negative, so it is reported as
an unsigned long, but the bytes-to-MiB functions do accept
negative amounts. As long as no machine has more than 2**62
bytes of memory, we're good though.
- don't have a NOTIFY CONSTANT property
- the data is constant, so drop NOTIFY
- remove redundant signals
- remove setLabels() now it's only needed from one constructor
- Create a job and ask it to create dbus files -- either directly,
or as a symlink. Since the target chroot isn't viable, this will
fail but we can at least see that directories are created, etc.
- Since these tests all want a system object, and a GS
with a sensible setup, give them one with its own initTestCase().
This could have been done with one executable, running tests from
multiple classes, but there's not much overall benefit there.
- Used to ensure that the directories leading up to a given path
exist. Implementation is incomplete and broken for now.
- While here, avoid removing an empty pathname in removeTargetFile()
(the empty pathname indicates a broken configuration).
- Add SPDX headers
- Indent consistently (tabs, not a mix of 2-space, 4-space, and tabs)
The scripts were originally added without a license header.
Since they are simple, and re-usable, and not particularly
interesting, I've made the license explicitly 2-clause BSD.
This is unlike the rest of Calamares, which is GPLv3+; the
build system and support scripts are not the software itself.
- add a Settings::init() to do actual work
- remove the same kind of code from CalamaresApplication
- make constructor of Settings private
- initialize settings before the application
- There's a multi-stage setup for debug-mode, where the application
object also knows that debugging is set. Remove it.
- Break debug mode (because now the settings don't get debug-mode set).
- Refactor so that parameter handing is only done if this Calamares
is the unique (first) Calamares.
- To support translation testing, without needing to recompile
Calamares, load files from the local directory when debugging,
or from /usr/share/calamares/lang/ in general.
- This allows updating translations and testing them with just
lrelease (a translation build tool) installed, without rebuilding
Calamares.
- This allows distro's to ship updated or modified translations without
rebuilding Calamares.
- Most of the code was error-checking, just replace the open-read
with a call to the service instead.
- It's not an error if /dev/urandom doesn't exist in the source system
(there may be other good random sources, and otherwise we have the
low-quality random fallback).
- these were empty, so the widgets were hidden in the details
dialog of the requirements check; which looks really strange
if the reason the check fails is because root is required,
and you can't see that in the details.
This commit is on a branch because it changes strings, and I want
to do a release Real Soon and not annoy the translators.
sidebar entry can be configured and translated
adding a more elaborate qml example
keeping this in dummyqml for now, another commit will follow with
continuation of dummyqml in a more aptly named module
- need a configuration before we can start loading (to support
the variable search paths)
- refactor showing a failure in the spinner widget. On failure,
the spinner will never go away, so a message for the user is good.
- stop clang-format from messing up the table of names.
- start of a class to hold configuration information; this can
later be substituted into the WelcomeViewStep and filled from
setConfigurationMap()
In the example application:
- register the Config type
- test application to display the QML (this will be extended
with adding the locale model to it)
- sample QML that does nothing useful yet (will display the locale
model once it's there)
This branch is an experiment in doing more QML UI things in Calamares
TODO list:
- Make Label (in libcalamares/locale) a QObject
- .. and add properties to it corresponding to the data fields
- Go over LabelModel to make sure it's usable
- Add a QObject for configuration of the Welcome module,
collecting all the settings and making them accessible as
properties (this might not need to be a separate object;
the WelcomeViewStep could be the object)
- Add a QObject / property access to branding data
- Add a QML test app that loads a QML file and the objects
and models listed above and displays the QML. This allows
experimenting with the welcome-page UI through QML (without
GeoIP support or requirements-checking though)
- Just read /proc/partitions and process it; split into columns,
add relevant bits.
- This implementation supports devices named "name", which the other
didn't (but that would be really weird).
The tests now pass.
- This is a tiny bit of TDD to replace the existing implementation
(a shell pipeline) with processing inside Calamares.
- The test fails right now, since the implementations are not
the same.
- Most of the time the working dir and stdin are not important,
you just want to run a command in the host, so simplify that
by providing a suitable overload.
- Use that overload from the partition service (for mount and sync).
- Calculate the length once at the start -- this is because
future work will modify the queue rather than just iterating
over it.
- Describe the slightly-surprising progress-percentage calculation.
- provide complete information for feature_summary
- set the right API version when building libcalamares
- report the beta version number when it's wrong
- The InternalManager object should have at most one living
instance at a time.
- getInternal() hands out shared_ptr<>s to the one living instance,
or creates a new one.
- The creation of a new InternalManager shouldn't count as a reference
to it, and it mustn't be deleted after the shared_ptr<>s have done
their work.
- So static shared_ptr<InternalManager> was the wrong choice,
since that leads to double deletes.
- While here, be a little more chatty when loading KPMCore.
- Starting to centralize utility code for partitioning into
libcalamares instead of scattered and weirdly shared between
modules.
- This particular commit breaks compiling the modules, though.
The test goals. e.g.: Evaluate the language selection and the partitioning configurations.
# Requirements
## Environment
What is the environment that should be tested and how it should be prepared. e.g.: The test needs to run in the release 3.32.34 installing Manjaro.
## User profile
Describe the target users you are looking for the test. e.g.: A user that has already used a system-installer.
## Facilitator
What the facilitator should be familiar with to run the tests. e.g.: The facilitator needs to know how to build Calamares to be able to run the tests.
# Test design
## Tasks
A list of tasks that the user has to perform. e.g.:
* Use another language.
* Change partitioning configurations.
## Scenarios
A list of scenarios for the user to perform the tasks. They should put the user in a context and not give specific hints about what you want the user to do. e.g.:
1. You want to change the installer language to English. Please, look for this option in the application.
2. You are a big fan of a lot of distributions and want to have some space left to install other distributions in your disk after this installation. Please, resize your disk to have 35GB of space left.
<!--
## Results
Uncomment this session once you have your results.
### Summary
| - | User 1 | User 2 | User 3 | User 4 | User 5 |
Describe what happened as expected. e.g.: Most users intuitively found the language selector for changing the installer language.
#### What were the challenges?
Describe where the users had issues and why. Try to write the details to ensure a good understanding of what happened. You can also attach videos, GIFs, or screenshots to illustrate. e.g.: Two of the users had issues searching for English on the language selector because they didn't realize they could scroll down to find it.
### Task 2
#### What went well?
Describe what happened as expected. e.g.: Most users intuitively found the language selector for changing the installer language.
#### What were the challenges?
Describe where the users had issues and why. Try to write the details to ensure a good understanding of what happened. You can also attach videos, GIFs, or screenshots to illustrate. e.g.: Two of the users had issues searching for English on the language selector because they didn't realize they could scroll down to find it.
DESCRIPTION"The following REQUIRED packages were not found:"
QUIET_ON_EMPTY
)
### PACKAGING
#
# Note: most distro's will do distro-specific packaging rather than
# using CPack, and this duplicates information in the AppStream, too.
# TODO:3.3 With newer CMake, move HOMEPAGE_URL to the project()call
set(CPACK_PACKAGE_VENDORcalamares)
set(CPACK_PACKAGE_DESCRIPTION_SUMMARY"A Linux system installer")
set(CPACK_PACKAGE_DESCRIPTION"Calamares is a Linux system installer, intended for Linux distributions to use on their ISOs and other bootable media to install the distribution to the end-user's computer. Calamares can also be used as an OEM configuration tool. It is modular, extensible and highly-configurable for Linux distributions from all five major Linux families.")
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
