version 002

There's no need for /usr/local to be in our paths at all, nor to
include a :$PATH at the end. The path should be exported though,
so modules don't have to worry about finding things.

Makefile

@@ -1,4 +1,4 @@
-VERSION=0.7
+VERSION=002
 GITVERSION=$(shell [ -d .git ] && git rev-list  --abbrev-commit  -n 1 HEAD  |cut -b 1-8)
 
 prefix = /usr
@@ -54,7 +54,12 @@ rpm: clean dracut-$(VERSION).tar.bz2
 	rm -fr BUILD BUILDROOT
 
 gitrpm: dracut-$(VERSION)-$(GITVERSION).tar.bz2
-	rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" --define "_rpmdir $$PWD" --define "gittag $(GITVERSION)" -ba dracut.spec 
+	echo "%define gittag $(GITVERSION)" > dracut.spec.git
+	cat dracut.spec >> dracut.spec.git
+	mv dracut.spec dracut.spec.bak
+	mv dracut.spec.git dracut.spec
+	rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" --define "_rpmdir $$PWD" --define "gittag $(GITVERSION)" -ba dracut.spec
+	mv dracut.spec.bak dracut.spec
 	rm -fr BUILD BUILDROOT
 
 check: all
@@ -73,5 +78,8 @@ testimages: all
 	./dracut -l -a debug --no-kernel -f test-dracut.img $(shell uname -r)
 	@echo wrote  test-dracut.img 
 	
+hostimage: all
+	./dracut -H -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	@echo wrote  test-$(shell uname -r).img 
 	
 

NEWS

@@ -0,0 +1,200 @@
+dracut-002
+==========
+- add ifname= argument for persistent netdev names
+- new /initqueue-finished to check if the main loop can be left
+- copy mdadm.conf if --mdadmconf set or mdadmconf in dracut.conf
+- plymouth: use plymouth-populate-initrd
+- add add_drivers for dracut and dracut.conf
+- add modprobe scsi_wait_scan to be sure everything was scanned
+- fix for several problems with md raid containers
+- fix for selinux policy loading
+- fix for mdraid for IMSM
+- fix for bug, which prevents installing 61-persistent-storage.rules (bug #520109)
+- fix for missing grep for md
+
+dracut-001
+==========
+- better --hostonly checks
+- better lvm/mdraid/dmraid handling
+- fcoe booting support
+    Supported cmdline formats:
+    fcoe=<networkdevice>:<dcb|nodcb>
+    fcoe=<macaddress>:<dcb|nodcb>
+    
+    Note currently only nodcb is supported, the dcb option is reserved for
+    future use.
+    
+    Note letters in the macaddress must be lowercase!
+    
+    Examples:
+    fcoe=eth0:nodcb
+    fcoe=4A:3F:4C:04:F8:D7:nodcb
+
+- Syslog support for dracut   
+    This module provides syslog functionality in the initrd.
+    This is especially interesting when complex configuration being
+    used to provide access to the device the rootfs resides on.
+
+
+dracut-0.9
+==========
+- let plymouth attach to the terminal (nice text output now)
+- new kernel command line parameter "rdinfo" show dracut output, even when
+  "quiet" is specified
+- rd_LUKS_UUID is now handled correctly
+- dracut-gencmdline: rd_LUKS_UUID and rd_MD_UUID is now correctly generated
+- now generates initrd-generic with around 15MB
+- smaller bugfixes
+
+dracut-0.8
+==========
+- iSCSI with username and password
+- support for live images (dmsquashed live images)
+- iscsi_firmware fixes
+- smaller images
+- bugfixes
+
+dracut-0.7
+==========
+- dracut:     strip binaries in initramfs
+    
+           --strip
+                  strip binaries in the initramfs (default)
+    
+           --nostrip
+                  do not strip binaries in the initramfs
+- dracut-catimages
+    
+    Usage: ./dracut-catimages [OPTION]... <initramfs> <base image>
+    [<image>...]
+    Creates initial ramdisk image by concatenating several images from the
+    command
+    line and /boot/dracut/
+    
+      -f, --force           Overwrite existing initramfs file.
+      -i, --imagedir        Directory with additional images to add
+                            (default: /boot/dracut/)
+      -o, --overlaydir      Overlay directory, which contains files that
+                            will be used to create an additional image
+      --nooverlay           Do not use the overlay directory
+      --noimagedir          Do not use the additional image directory
+      -h, --help            This message
+      --debug               Output debug information of the build process
+      -v, --verbose         Verbose output during the build process
+
+- s390 dasd support
+
+dracut-0.6
+==========
+- dracut: add --kernel-only and --no-kernel arguments
+    
+           --kernel-only
+                  only install kernel drivers and firmware files
+    
+           --no-kernel
+                  do not install kernel drivers and firmware files
+    
+    All kernel module related install commands moved from "install"
+    to "installkernel".
+    
+    For "--kernel-only" all installkernel scripts of the specified
+    modules are used, regardless of any checks, so that all modules
+    which might be needed by any dracut generic image are in.
+    
+    The basic idea is to create two images. One image with the kernel
+    modules and one without. So if the kernel changes, you only have
+    to replace one image.
+    
+    Grub and the kernel can handle multiple images, so grub entry can
+    look like this:
+    
+    title Fedora (2.6.29.5-191.fc11.i586)
+            root (hd0,0)
+            kernel /vmlinuz-2.6.29.5-191.fc11.i586 ro rhgb quiet
+            initrd /initrd-20090722.img /initrd-kernel-2.6.29.5-191.fc11.i586.img /initrd-config.img
+    
+    initrd-20090722.img
+      the image provided by the initrd rpm
+      one old backup version is kept like with the kernel
+    
+    initrd-kernel-2.6.29.5-191.fc11.i586.img
+      the image provided by the kernel rpm
+    
+    initrd-config.img
+      optional image with local configuration files
+
+- dracut: add --kmoddir directory, where to look for kernel modules
+    
+           -k, --kmoddir [DIR]
+                  specify the directory, where to look for kernel modules
+
+
+
+dracut-0.5
+==========
+- more generic (all plymouth modules, all keyboards, all console fonts)
+- more kernel command line parameters (see also man dracut(8))
+- a helper tool, which generates the kernel command line (dracut-gencmdline)
+- bridged network boot
+- a lot of new command line parameter
+
+dracut-0.4
+==========
+- bugfixes
+- firmware loading support
+- new internal queue (initqueue)
+    initqueue now loops until /dev/root exists or root is mounted
+    
+    init now has the following points to inject scripts:
+    
+    /cmdline/*.sh
+       scripts for command line parsing
+    
+    /pre-udev/*.sh
+       scripts to run before udev is started
+    
+    /pre-trigger/*.sh
+       scripts to run before the main udev trigger is pulled
+    
+    /initqueue/*.sh
+       runs in parallel to the udev trigger
+       Udev events can add scripts here with /sbin/initqueue.
+       If /sbin/initqueue is called with the "--onetime" option, the script
+       will be removed after it was run.
+       If /initqueue/work is created and udev >= 143 then this loop can
+       process the jobs in parallel to the udevtrigger.
+       If the udev queue is empty and no root device is found or no root
+       filesystem was mounted, the user will be dropped to a shell after
+       a timeout.
+       Scripts can remove themselves from the initqueue by "rm $job".
+    
+    /pre-mount/*.sh
+       scripts to run before the root filesystem is mounted
+       NFS is an exception, because it has no device node to be created
+       and mounts in the udev events
+    
+    /mount/*.sh
+       scripts to mount the root filesystem
+       NFS is an exception, because it has no device node to be created
+       and mounts in the udev events
+       If the udev queue is empty and no root device is found or no root
+       filesystem was mounted, the user will be dropped to a shell after
+       a timeout.
+    
+    /pre-pivot/*.sh
+       scripts to run before the real init is executed and the initramfs
+       disappears
+       All processes started before should be killed here.
+    
+    The behaviour of the dmraid module demonstrates how to use the new
+    mechanism. If it detects a device which is part of a raidmember from a
+    udev rule, it installs a job to scan for dmraid devices, if the udev
+    queue is empty. After a scan, it removes itsself from the queue.
+
+
+
+dracut-0.3
+==========
+
+- first public version
+

README

@@ -21,8 +21,10 @@ as hooks are guaranteed to be the path to slow-down.
 
 Most of the initrd generation functionality in dracut is provided by a bunch
 of generator modules that are sourced by the main dracut script to install
-specific functionality into the initrd.  They live in the modules.d subdirectory,
-and use functionality provided by dracut-functions to do their work.
+specific functionality into the initrd.  They live in the modules.d 
+subdirectory, and use functionality provided by dracut-functions to do their 
+work.
+
 Some general rules for writing modules:
  * Use one of the inst family of functions to actually install files
    on to the initrd.  They handle mangling the pathnames and (for binaries,
@@ -59,13 +61,13 @@ the documentation, git access, etc.
 
 Git Repository:
 http://dracut.git.sourceforge.net/
-git://dracut.git.sourceforge.net/gitroot/dracut
+git://dracut.git.sourceforge.net/gitroot/dracut/dracut
 
 Trac Instance:
 http://apps.sourceforge.net/trac/dracut/ 
 
 The git tree can be found at
-git://dracut.git.sourceforge.net/gitroot/dracut  for now.  See the TODO
+git://dracut.git.sourceforge.net/gitroot/dracut/dracut for now.  See the TODO
 file for things which still need to be done and HACKING for some
 instructions on how to get started.  There is also a mailing list that
 is being used for the discussion -- initramfs@vger.kernel.org.  It is

README.generic

@@ -8,3 +8,6 @@ To build a generic initramfs, you have to install the following software package
  * mdadm
  * net-tools iproute
 
+Generic initramfs'es are huge (usually over 10 megs in size uncompressed), but
+should be able to automatically boot any bootable configuration with appropriate
+boot flags (root device, network configuration information, etc.)

README.modules

@@ -35,7 +35,7 @@ check: Dracut calls this program to check and see if a module can be installed
        are present.  It should exit with a 0 if they are, and a 1 if they are
        not.
 
-       When called with -H, it should perform the same check that it would
+       When called with -h, it should perform the same check that it would
        without any options, and it should also check to see if the 
        functionality the module implements is being used on the host system.
        For example, if this module handles installing support for LUKS
@@ -43,9 +43,12 @@ check: Dracut calls this program to check and see if a module can be installed
        encrpted volumes are available and the host system has the root
        partition on an encrypted volume, 1 otherwise.
 
+       When called with -d, it should output a list of dracut modules
+       that it relies upon.  An example would be the nfs and iscsi modules,
+       which rely on the network module to detect and configure network
+       interfaces.
+
        Check may take additional options in the future.  
-       We will most likely grow a module dependency checking system in the
-       near future, and check will need to handle a -d option when we do.
 
 Any other files in the module will not be touched by dracut directly. 
 

dracut

@@ -34,7 +34,9 @@ Creates initial ramdisk images for preloading modules
   -o, --omit [LIST]     Omit a space-separated list of dracut modules.
   -a, --add [LIST]      Add a space-separated list of dracut modules.
   -d, --drivers [LIST]  Specify a space-separated list of kernel modules to
-                         include in the initramfs.
+                        exclusively include in the initramfs.
+  --add-drivers [LIST]  Specify a space-separated list of kernel 
+                        modules to add to the initramfs.
   -k, --kmoddir [DIR]   Specify the directory, where to look for kernel 
                         modules
   --fwdir [DIR]         Specify additional directories, where to look for 
@@ -43,6 +45,8 @@ Creates initial ramdisk images for preloading modules
   --no-kernel           Do not install kernel drivers and firmware files
   --strip               Strip binaries in the initramfs (default)
   --nostrip             Do not strip binaries in the initramfs
+  --mdadmconf           Include local /etc/mdadm.conf
+  --nomdadmconf         Do not include local /etc/mdadm.conf
   -h, --help            This message
   --debug               Output debug information of the build process
   -v, --verbose         Verbose output during the build process
@@ -69,18 +73,21 @@ while (($# > 0)); do
 	-o|--omit) omit_dracutmodules_l="$2"; shift;;
 	-a|--add) add_dracutmodules_l="$2"; shift;;
 	-d|--drivers) drivers_l="$2"; shift;;
+	--add-drivers) add_drivers_l="$2"; shift;;
 	-k|--kmoddir) drivers_dir_l="$2"; shift;;
 	--fwdir) fw_dir_l="$2"; shift;;
 	--kernel-only) kernel_only="yes"; nokernel="no";;
 	--no-kernel) kernel_only="no"; no_kernel="yes";;
 	--strip) do_strip_l="yes";;
 	--nostrip) do_strip_l="no";;
+        --mdadmconf) mdadmconf_l="yes";;
+        --nomdadmconf) mdadmconf_l="no";;
 	-h|--help) usage; exit 1 ;;
 	--debug) debug="yes";;
 	-v|--verbose) beverbose="yes";;
 	-c|--conf) conffile="$2"; shift;;
 	-l|--local) allowlocal="yes" ;;
-	-H|--hostonly) hostonly="-h" ;;
+	-H|--hostonly) hostonly_l="yes" ;;
 	-i|--include) include_src="$2"; include_target="$3"; shift 2;;
 	-I|--install) install_items="$2"; shift;;
 	-*) printf "\nUnknown option: %s\n\n" "$1" >&2; usage; exit 1;;
@@ -89,7 +96,8 @@ while (($# > 0)); do
     shift
 done
 
-PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:$PATH
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+export PATH
 
 [[ $debug ]] && { 
     export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): ';
@@ -107,14 +115,21 @@ PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:$PATH
 [[ $omit_dracutmodules_l ]] && omit_dracutmodules=$omit_dracutmodules_l
 [[ $add_dracutmodules_l ]] && add_dracutmodules="$add_dracutmodules $add_dracutmodules_l"
 [[ $drivers_l ]] && drivers=$drivers_l
+[[ $add_drivers_l ]] && add_drivers=$add_drivers_l
 [[ $drivers_dir_l ]] && drivers_dir=$drivers_dir_l
 [[ $fw_dir_l ]] && fw_dir=$fw_dir_l
 [[ $do_strip_l ]] && do_strip=$do_strip_l
+[[ $hostonly_l ]] && hostonly=$hostonly_l
+[[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
 [[ $dracutbasedir ]] || dracutbasedir=/usr/share/dracut
 [[ $fw_dir ]] || fw_dir=/lib/firmware
 [[ $do_strip ]] || do_strip=yes
+# eliminate IFS hackery when messing with fw_dir
+fw_dir=${fw_dir//:/ }
 
-[[ $allowlocal && -f "$(dirname $0)/dracut-functions" ]] && dsrc="$(dirname $0)" || dsrc=$dracutbasedir
+[[ $hostonly = yes ]] && hostonly="-h"
+
+[[ $allowlocal && -f "$(readlink -f $(dirname $0))/dracut-functions" ]] && dsrc="$(dirname $0)" || dsrc=$dracutbasedir
 
 if [[ -f $dsrc/dracut-functions ]]; then
    . $dsrc/dracut-functions
@@ -136,7 +151,7 @@ esac
 [[ $1 ]] && outfile=$(readlink -f $1) || outfile="/boot/initrd-$kernel.img"
 
 srcmods="/lib/modules/$kernel/"
-[ -n "$drivers_dir" ] && srcmods="$drivers_dir"
+[[ $drivers_dir ]] && srcmods="$drivers_dir"
 export srcmods
 
 if [[ -f $outfile && ! $force ]]; then
@@ -153,9 +168,10 @@ trap 'rm -rf "$initdir"' 0 # clean up after ourselves no matter how we die.
 chmod 755 "$initdir"
 
 export initdir hookdirs dsrc dracutmodules drivers \
-    fw_dir drivers_dir debug beverbose no_kernel kernel_only
+    fw_dir drivers_dir debug beverbose no_kernel kernel_only \
+    add_drivers mdadmconf
 
-if [[ "$kernel_only" != "yes" ]]; then
+if [[ $kernel_only != yes ]]; then
     # Create some directory structure first
     for d in bin sbin usr/bin usr/sbin usr/lib etc proc sys sysroot tmp dev/pts var/run; do 
 	mkdir -p "$initdir/$d"; 
@@ -170,11 +186,11 @@ check_modules
 for moddir in "$dsrc/modules.d"/[0-9][0-9]*; do
     mod=${moddir##*/}; mod=${mod#[0-9][0-9]}
     if strstr "$mods_to_load" " $mod "; then
-	if [[ "$kernel_only" = "yes" ]]; then
-	    [[ -x "$moddir/installkernel" ]] && . "$moddir/installkernel"
+	if [[ $kernel_only = yes ]]; then
+	    [[ -x $moddir/installkernel ]] && . "$moddir/installkernel"
 	else
 	    . "$moddir/install"
-	    if [[ "$no_kernel" != "yes" && -x "$moddir/installkernel" ]]; then
+	    if [[ $no_kernel != yes && -x $moddir/installkernel ]]; then
 		. "$moddir/installkernel"
 	    fi
 	fi
@@ -182,12 +198,11 @@ for moddir in "$dsrc/modules.d"/[0-9][0-9]*; do
     fi
 done
 unset moddir
-echo $mods_to_load
 
 ## final stuff that has to happen
 
 # generate module dependencies for the initrd
-if [ -d "$initdir/lib/modules/$kernel" ]; then
+if [[ -d $initdir/lib/modules/$kernel ]]; then
     if ! depmod -a -b "$initdir" $kernel; then
         echo "\"depmod -a $kernel\" failed."
         exit 1
@@ -207,10 +222,10 @@ for item in $install_items; do
 done
 unset item
 
-[[ "$beverbose" = "yes" ]] && (du -c "$initdir" | sort -n)
+[[ $beverbose = yes ]] && (du -c "$initdir" | sort -n)
 
 # strip binaries 
-if [ "$do_strip" = "yes" ] ; then
+if [[ $do_strip = yes ]] ; then
     for p in strip objdump sed grep find; do 
 	if ! which $p >/dev/null 2>&1; then
 	    derror "Could not find '$p'. You should run $0 with '--nostrip'."
@@ -219,7 +234,7 @@ if [ "$do_strip" = "yes" ] ; then
     done
 fi
 
-if [ "$do_strip" = "yes" ] ; then
+if [[ $do_strip = yes ]] ; then
     for f in $(find "$initdir" -type f \( -perm -0100 -or -perm -0010 -or -perm -0001 \) -exec file {} \; | 
 	grep -v ' shared object,' | 
 	sed -n -e 's/^\(.*\):[ 	]*ELF.*, not stripped/\1/p'); do
@@ -238,9 +253,9 @@ if [ "$do_strip" = "yes" ] ; then
     done
 fi
 
-( cd "$initdir"; find . |cpio -H newc -o |gzip -9 > "$outfile"; )
+( cd "$initdir"; find . |cpio -R 0:0 -H newc -o --quiet |gzip -9 > "$outfile"; )
 
-[[ "$beverbose" = "yes" ]] && ls -lh "$outfile"
+[[ $beverbose = yes ]] && ls -lh "$outfile"
 
 exit 0
 

dracut-catimages

@@ -70,7 +70,7 @@ done
 
 outfile=$1; shift
 
-if [ -z "$outfile" ]; then
+if [[ -z $outfile ]]; then
     derror "No output file specified."
     usage
     exit 1
@@ -78,45 +78,47 @@ fi
 
 baseimage=$1; shift
 
-if [ -z "$baseimage" ]; then
+if [[ -z $baseimage ]]; then
     derror "No base image specified."
     usage
     exit 1
 fi
 
-if [ -f $outfile -a -z "$force" ]; then
+if [[ -f $outfile && ! $force ]]; then
     derror "Will not override existing initramfs ($outfile) without --force"
     exit 1
 fi
 
-if [ -z "$no_imagedir" -a ! -d "$imagedir" ]; then
+if [[ ! $no_imagedir && ! -d $imagedir ]]; then
     derror "Image directory $overlay is not a directory"
     exit 1
 fi
 
-if [ -z "$no_overlay" -a ! -d "$overlay" ]; then
+if [[ ! $no_overlay && ! -d $overlay ]]; then
     derror "Overlay $overlay is not a directory"
     exit 1
 fi
 
-if [ -z "$no_overlay" ]; then
+if [[ ! $no_overlay ]]; then
     ofile="$imagedir/90-overlay.img"
     dinfo "Creating image $ofile from directory $overlay"
     ( cd "$overlay"; find . |cpio --quiet -H newc -o  |gzip -9 > "$ofile"; )
 fi
 
-if [ -z "$no_imagedir" ]; then
-    images=$(for i in $imagedir/*.img;do [ -f $i ] || continue; echo $i; done)
+if [[ ! $no_imagedir ]]; then
+    for i in "$imagedir/"*.img; do
+	[[ -f $i ]] && images+=("$i")
+    done
 fi
 
-images="$images $@"
+images+=($@)
 
 dinfo "Using base image $baseimage"
-cat $baseimage > $outfile
+cat "$baseimage" > "$outfile"
 
-for i in $images; do 
+for i in "${images[@]}"; do 
     dinfo "Appending $i"
-    cat $i >> $outfile
+    cat "$i" >> "$outfile"
 done
 
 dinfo "Created $outfile"

dracut-functions

@@ -22,30 +22,113 @@ IF_RTLD=""
 IF_dynamic=""
 
 # Generic substring function.  If $2 is in $1, return 0.
-strstr() { [[ ! ${1#*$2*} = $1 ]]; }
+strstr() { [[ $1 =~ $2 ]]; }
 
 # Log initrd creation.
 if ! [[ $dracutlogfile ]]; then
     [[ $dsrc = /usr/share/dracut ]] && \
-       dracutlogfile=/var/log/dracut.log || \
-       dracutlogfile=/tmp/dracut.log
-    [[ -w "$dracutlogfile" ]] || dracutlogfile=/tmp/dracut.log
-    >"$dracutlogfile"
+	dracutlogfile=/var/log/dracut.log || \
+	dracutlogfile=/tmp/dracut.log
+#    [[ -w $dracutlogfile ]] || dracutlogfile=/tmp/dracut.log
+    if [[ -w $dracutlogfile ]]; then
+        >"$dracutlogfile"
+    fi
 fi
 
 dwarning() {
     echo "W: $@" >&2
-    [[ -w "$dracutlogfile" ]] && echo "W: $@" >>"$dracutlogfile"
+    [[ -w $dracutlogfile ]] && echo "W: $@" >>"$dracutlogfile"
 }
 
 dinfo() {
     [[ $beverbose ]] && echo "I: $@" >&2
-    [[ -w "$dracutlogfile" ]] && echo "I: $@" >>"$dracutlogfile"
+    [[ -w $dracutlogfile ]] && echo "I: $@" >>"$dracutlogfile"
 }
 
 derror() {
     echo "E: $@" >&2
-    [[ -w "$dracutlogfile" ]] && echo "E: $@" >>"$dracutlogfile"
+    [[ -w $dracutlogfile ]] && echo "E: $@" >>"$dracutlogfile"
+}
+
+get_fs_env() {
+    if [[ -x /lib/udev/vol_id ]]; then
+	eval $(/lib/udev/vol_id --export $1)
+    elif find_binary blkid >/dev/null; then
+	eval $(blkid -o udev $1)
+    else
+	return 1
+    fi
+}
+
+get_fs_type() (
+    get_fs_env $1 || return
+    echo $ID_FS_TYPE
+)
+
+get_fs_uuid() (
+    get_fs_env $1 || return
+    echo $ID_FS_UUID
+)
+
+# finds the major:minor of the block device backing the root filesystem.
+find_block_device() {
+    local rootdev blkdev fs type opts misc
+    while read blkdev fs type opts misc; do
+	[[ $blkdev = rootfs ]] && continue # skip rootfs entry
+	[[ $fs = $1 ]] && { rootdev=$blkdev; break; } # we have a winner!
+    done < /proc/mounts
+    [[ -b $rootdev ]] || return 1 # oops, not a block device.
+    # get major/minor for the device
+    ls -nLl "$rootdev" | \
+	(read x x x x maj min x; maj=${maj//,/}; echo $maj:$min)
+}
+
+find_root_block_device() { find_block_device /; }
+
+# Walk all the slave relationships for a given block device.
+# Stop when our helper function returns success
+# $1 = function to call on every found block device
+# $2 = block device in major:minor format
+check_block_and_slaves() {    
+    local x 
+    [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry.
+    "$1" $2 && return
+    check_vol_slaves "$@" && return 0
+    [[ -d /sys/dev/block/$2/slaves ]] || return 1
+    for x in /sys/dev/block/$2/slaves/*/dev; do
+        [[ -f $x ]] || continue
+	check_block_and_slaves $1 $(cat "$x") &&  return 0
+    done
+    return 1
+}
+
+get_numeric_dev() {
+    ls -lH "$1" | { read a b c d maj min rest; printf "%d:%d" ${maj%%,} $min;}
+}
+
+# ugly workaround for the lvm design
+# There is no volume group device,
+# so, there are no slave devices for volume groups.
+# Logical volumes only have the slave devices they really live on,
+# but you cannot create the logical volume without the volume group.
+# And the volume group might be bigger than the devices the LV needes.
+check_vol_slaves() {
+    for i in /dev/mapper/*; do 
+	lv=$(get_numeric_dev $i)
+	if [[ $lv = $2 ]]; then
+	    vg=$(lvm lvs --noheadings -o vg_name $i 2>/dev/null)
+	    # strip space
+	    vg=$(echo $vg)
+	    if [[ $vg ]]; then
+		for pv in $(lvm vgs --noheadings -o pv_name "$vg" 2>/dev/null); \
+		    do
+ 		    check_block_and_slaves $1 $(get_numeric_dev $pv) \
+			&&  return 0
+		done
+	    fi
+	fi
+    done
+    return 1
 }
 
 # $1 = file to copy to ramdisk
@@ -55,11 +138,11 @@ derror() {
 inst_simple() {
     local src target
     [[ -f $1 ]] || return 1
-    src=$1 target="${initdir}${2:-$1}"
+    src=$1 target=${initdir}${2:-$1}
     [[ -f $target ]] && return 0
     mkdir -p "${target%/*}"
     dinfo "Installing $src" 
-    cp -fL "$src" "$target"
+    cp -pfL "$src" "$target"
 }
 
 # Same as above, but specialzed to handle dynamic libraries.
@@ -69,10 +152,10 @@ inst_library() {
     local src=$1 dest=${2:-$1}
     [[ -f $initdir$dest ]] && return 0
     if [[ -L $src ]]; then
-	reallib="$(readlink -f "$src")"
+	reallib=$(readlink -f "$src")
 	lib=${src##*/}
 	inst_simple "$reallib" "$reallib"
-	mkdir -p ${initdir}${dest%/*}
+	mkdir -p "${initdir}${dest%/*}"
 	(cd "${initdir}${dest%/*}" && ln -s "$reallib" "$lib")
     else
 	inst_simple "$src" "$dest"
@@ -83,7 +166,7 @@ inst_library() {
 # search in the usual places to find the binary.
 find_binary() {
     local binpath="/bin /sbin /usr/bin /usr/sbin" p
-    [[ -x $1 ]] && { echo $1; return 0; }
+    [[ -z ${1##/*} && -x $1 ]] && { echo $1; return 0; } 
     for p in $binpath; do
 	[[ -x $p/$1 ]] && { echo "$p/$1"; return 0; }
     done
@@ -115,15 +198,15 @@ inst_binary() {
 	lib_regex='^(/lib[^/]*).*'
 	if [[ $FILE =~ $lib_regex ]]; then
             TLIBDIR=${BASH_REMATCH[1]}
-            BASE="${FILE##*/}"
+            BASE=${FILE##*/}
 	    # prefer nosegneg libs, then unoptimized ones.
 	    for f in "$TLIBDIR/i686/nosegneg" "$TLIBDIR"; do
 		[[ -f $f/$BASE ]] || continue
-		FILE="$f/$BASE"
+		FILE=$f/$BASE
 		break
 	    done
 	    inst_library "$FILE" "$TLIBDIR/$BASE"
-            IF_dynamic="yes"
+            IF_dynamic=yes
 	    continue
 	fi
         inst_library "$FILE" 
@@ -150,7 +233,7 @@ inst_symlink() {
     [[ -L $1 ]] || return 1
     [[ -L $target ]] && return 0
     realsrc=$(readlink -f "$src")
-    [[ $realsrc = ${realsrc##*/} ]] && realsrc="${src%/*}/$realsrc"
+    [[ $realsrc = ${realsrc##*/} ]] && realsrc=${src%/*}/$realsrc
     inst "$realsrc" && ln -s "$realsrc" "$target"
 }
 
@@ -166,10 +249,10 @@ find_rule() {
 # udev rules always get installed in the same place, so
 # create a function to install them to make life simpler.
 inst_rules() { 
-    local target="/etc/udev/rules.d"
+    local target=/etc/udev/rules.d
     mkdir -p "$initdir/lib/udev/rules.d" "$initdir$target"
     for rule in "$@"; do 
-	rule=$(find_rule $rule) && \
+	rule=$(find_rule "$rule") && \
 	    inst_simple "$rule" "$target/${rule##*/}"
     done
 }
@@ -177,10 +260,21 @@ inst_rules() {
 # general purpose installation function
 # Same args as above.
 inst() {
-    if (($# != 1 && $# != 2 )); then
-        derror "inst only takes 1 or 2 arguments"
-	exit 1
-    fi
+    case $# in
+        1) ;;
+        2)
+            [[ -z $initdir ]] && [[ -d $2 ]] && export initdir=$2
+            [[ $initdir = $2 ]] && set $1
+            ;;
+        3)
+	    [[ -z $initdir ]] && export initdir=$2 
+            set $1 $3
+            ;;
+        *)
+            derror "inst only takes 1 or 2 or 3 arguments"
+            exit 1
+            ;;
+    esac
     for x in inst_symlink inst_script inst_binary inst_simple; do
        $x "$@" && return 0
     done
@@ -203,32 +297,27 @@ inst_hook() {
 }
 
 dracut_install() {
-    local optional=
+    if [[ $1 = '-o' ]]; then 
+	local optional=yes
+	shift
+    fi
     while (($# > 0)); do
-        # Might be nice to optionally install a binary
-        if [ "$1" == "-o" ]; then
-           optional="yes"
-           shift
-           continue
-        fi
-	if inst "$1" ; then
-            shift 
-            continue
-        fi
-        if [ "$optional" == "yes" ]; then
-          dwarning "Skipping program $1 as it cannot be found and is flagged to be optional"
-          shift
-          continue
-        else
-          derror "Failed to install $1"; exit 1
-        fi
+	if ! inst "$1" ; then
+	    if [[ $optional = yes ]]; then
+		dwarning "Skipping program $1 as it cannot be found and is flagged to be optional"
+	    else
+		derror "Failed to install $1"
+		exit 1
+            fi
+	fi
+	shift
     done
 }
 
 check_module_deps() {
     local moddir dep ret
     # if we are already set to be loaded, we do not have to be checked again.
-    strstr "$mods_to_load" " $1 "
+    strstr "$mods_to_load" " $1 " && return
     # turn a module name into a directory, if we can.
     moddir=$(echo ${dsrc}/modules.d/??${1})
     [[ -d $moddir && -x $moddir/install ]] || return 1
@@ -249,11 +338,11 @@ check_module_deps() {
 
 should_source_module() {
     local dep
-    [[ -x $1/install ]] || return 1
-    if [[ "$kernel_only" = "yes" ]]; then
+    if [[ $kernel_only = yes ]]; then
         [[ -x $1/installkernel ]] && return 0
         return 1
     fi
+    [[ -x $1/install ]] || [[ -x $1/installkernel ]] || return 1
     [[ -x $1/check ]] || return 0
     "$1/check" $hostonly || return 1
     for dep in $("$1/check" -d); do
@@ -280,16 +369,72 @@ check_modules() {
     done
 }
 
-# install kernel modules, and handle installing all their dependencies as well.
+# Install a single kernel module along with any firmware it may require.
+# $1 = full path to kernel module to install
+install_kmod_with_fw() {
+    local modname=${1##*/} fwdir found
+    modname=${modname%.ko}
+    inst_simple "$1" "/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" || \
+	return 0 # no need to go further if the module is already installed
+    for fw in $(modinfo -k $kernel -F firmware $1 2>/dev/null); do
+	found=''
+	for fwdir in $fw_dir; do
+	    if [[ -d $fwdir && -f $fwdir/$fw ]]; then
+		inst_simple "$fwdir/$fw" "/lib/firmware/$fw"
+		found=yes
+	    fi
+	done
+	if [[ $found != yes ]]; then
+	    dwarning "Possible missing firmware ${fw} for module ${mod}.ko"
+	fi
+    done
+}
+
+# Do something with all the dependencies of a kernel module.
+# Note that kernel modules depend on themselves using the technique we use
+# $1 = function to call for each dependency we find 
+#      It will be passed the full path to the found kernel module 
+# $2 = module to get dependencies for
+# rest of args = arguments to modprobe
+for_each_kmod_dep() {
+    local func=$1 kmod=$2 cmd modpapth options
+    shift 2
+    modprobe "$@" --ignore-install --show-depends $kmod 2>/dev/null | \
+	while read cmd modpath options; do
+	    [[ $cmd = insmod ]] || continue
+	    $func $modpath
+    done
+}
+
+# filter kernel modules to install certian modules that meet specific
+# requirements.
+# $1 = function to call with module name to filter.
+#      This function will be passed the full path to the module to test.
+# The behaviour of this function can vary depending on whether $hostonly is set.
+# If it is, we will only look at modules that are already in memory.
+# If it is not, we will look at all kernel modules
+# This function returns the full filenames of modules that match $1
+filter_kernel_modules () (
+    if [[ $hostonly = '' ]]; then
+	filtercmd='find "$srcmods/kernel/drivers" -name "*.ko"'
+    else
+	filtercmd='cut -d " " -f 1 </proc/modules|xargs modinfo -F filename -k $kernel'
+    fi
+    for modname in $(eval $filtercmd); do
+	"$1" "$modname" && echo "$modname"
+    done
+)
+
+# install kernel modules along with all their dependencies.
 instmods() {
-    [[ "$no_kernel" = "yes" ]] && return
+    [[ $no_kernel = yes ]] && return
     local mod mpargs modpath modname cmd
     while (($# > 0)); do
 	mod=${1%.ko}
 	case $mod in
 	    =*) # This introduces 2 incompatible meanings for =* arguments
                 # to instmods.  We need to decide which one to keep.
-		if [ "$mod" = "=ata" -a -f $srcmods/modules.block ] ; then 
+		if [[ $mod = =ata && -f $srcmods/modules.block ]] ; then 
 		    instmods $mpargs $(egrep 'ata|ahci' "${srcmods}/modules.block")
 		elif [ -f $srcmods/modules.${mod#=} ]; then
 		    instmods $mpargs $(cat ${srcmods}/modules.${mod#=} )
@@ -297,13 +442,16 @@ instmods() {
 		    instmods $mpargs $(find "$srcmods" -path "*/${mod#=}/*")
 		fi
 		;;
-	    --*) mpargs+=" $mod";;
+	    --*) 
+	        mod=${mod##*/}
+                mpargs+=" $mod";;
             i2o_scsi)
                     # Must never run this diagnostic-only module
                     shift; continue;
                 ;;
-	    *)  mod=${mod##*/}
-	        # if we are already installed, skip this module and go on
+	    *)  
+	        mod=${mod##*/}
+                # if we are already installed, skip this module and go on
 	        # to the next one.
 	        [[ -f $initdir/$1 ]] && { shift; continue; }
 		# If we are building a host-specific initramfs and this
@@ -311,31 +459,10 @@ instmods() {
 		[[ $hostonly ]] && ! grep -q "$mod" /proc/modules && { 
 		    shift; continue; 
 		}
-                modprobe $mpargs --ignore-install --set-version $kernel -d ${srcmods%%/lib/modules/*}/ \
-		    --show-depends $mod 2>/dev/null | \
-		    while read cmd modpath options; do
-		    [[ $cmd = insmod ]] || continue
-		    modname=${modpath##*/}
-		    modname=${modname%.ko}
-		    if [[ ${mod/-/_} != ${modname/-/_} ]]; then
-			dinfo "Installing dependencies for $mod ($modpath)"
-			instmods $mpargs $modname
-		    fi
-		    inst_simple "$modpath" "/lib/modules/$kernel/${modpath##*/lib/modules/$kernel/}"
-		    for fw in $(modinfo -k $kernel -F firmware $modpath 2>/dev/null); do
-			unset found
-			IFS=: 
-			for fwdir in $fw_dir; do		    
-		            if [ -d "$fwdir" -a -f $fwdir/$fw ]; then
-				inst_simple "$fwdir/$fw" "/lib/firmware/$fw"
-				found=yes
-			    fi
-			done
-			if [ "$found" != "yes" ]; then
-			    dwarning "Possible missing firmware ${fw} for module ${mod}.ko"
-			fi
-		    done
-		done
+		# ok, load the module, all its dependencies, and any firmware
+		# it may require
+		for_each_kmod_dep install_kmod_with_fw $mod \
+		    --set-version $kernel -d ${srcmods%%/lib/modules/*}/
 		;;
 	esac      
 	shift

dracut-gencmdline

@@ -21,22 +21,11 @@
 
 
 function error() {
-    local NONL=""
-    if [ "$1" == "-n" ]; then
-        NONL="-n"
-        shift
-    fi
-    echo $NONL "$@" >&2
+    echo "$@" >&2
 }
 
 function vecho() {
-    return
-    local NONL=""
-    if [ "$1" == "-n" ]; then
-        NONL="-n"
-        shift
-    fi
-    is_verbose && echo $NONL "$@"
+    is_verbose && echo "$@"
 }
 
 # module dep finding and installation functions
@@ -52,18 +41,11 @@ moduledep() {
     [ -n "$deps" ] && vecho ": $deps" || vecho
 }
 
-if [ $UID != 0 ]; then
-    error "$0 must be run as root."
-    exit 1
-fi
-
 export MALLOC_PERTURB_=204
 
 PATH=/sbin:/usr/sbin:/bin:/usr/bin:$PATH
 export PATH
 
-. /etc/rc.d/init.d/functions
-
 # Set the umask. For iscsi, the initrd can contain plaintext
 # password (chap secret), so only allow read by owner.
 umask 077
@@ -643,6 +625,7 @@ emitcrypto()
     if [ -z "$luksuuid" ]; then
         luksuuid="$2"
     fi
+    luksuuid=${luksuuid##UUID=}
     echo -n "rd_LUKS_UUID=$luksuuid "
 }
 
@@ -652,7 +635,9 @@ done
 
 if [ -n "$raiddevices" ]; then
     for dev in $raiddevices; do
-        echo -n "rd_MD_UUID=${dev} "
+        uid=$(udevadm info --query=all --name=/dev/${dev}|grep  MD_UUID)
+        uid=$(IFS="=";set $uid;echo $2)
+        echo -n "rd_MD_UUID=$uid "
     done
 fi
 

dracut.8

@@ -28,7 +28,9 @@ omit a space-separated list of dracut modules.
 add a space-separated list of dracut modules.
 .TP
 .BR \-d ", " \-\-drivers " \fILIST\fR"
-specify a space-separated list of kernel modules to include in the initramfs.
+specify a space-separated list of kernel modules to exclusively include in the initramfs.
+.BR \-\-add-drivers " \fILIST\fR"
+specify a space-separated list of kernel modules to add to the initramfs.
 .TP
 .BR \-k ", " \-\-kmoddir " \fI{DIR}\fR   
 specify the directory, where to look for kernel modules
@@ -42,6 +44,12 @@ only install kernel drivers and firmware files
 .BR \-\-no-kernel
 do not install kernel drivers and firmware files
 .TP
+.BR \-\-mdadmconf
+include local /etc/mdadm.conf
+.TP
+.BR \-\-nomdadmconf
+do not include local /etc/mdadm.conf
+.TP
 .BR \-\-strip
 strip binaries in the initramfs (default)
 .TP
@@ -95,7 +103,10 @@ root filesystem.
 .B root=<path to blockdevice>
 specify e.g. \fI/dev/sda1\fR or
 \fI/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1\fR
-
+.B rootfstype=<filesystem type>
+"auto" if not specified, e.g. \fIrootfstype=ext3\fR
+.B rootflags=<mount options>
+specify additional mount options for the root filesystem
 .SH I18N
 e.g. LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=de-latin1-nodeadkeys
 .TP
@@ -117,11 +128,6 @@ will be written to /etc/sysconfig/i18n in the initramfs
 .B LANG=<locale>
 will be written to /etc/sysconfig/i18n in the initramfs
 
-.SH Bootsplash - plymouth
-.TP
-.B rd_plytheme=<theme name>
-specify the plymouth bootsplash theme (fallback is text)
-
 .SH LVM
 .TP
 .B rd_NO_LVM
@@ -146,6 +152,9 @@ disable MD RAID detection
 .B rd_NO_MDIMSM
 no MD RAID for imsm/isw raids, use dmraid instead
 .TP
+.B rd_NO_MDADMCONF
+ignore mdadm.conf included in initramfs
+.TP
 .B rd_MD_UUID=<md uuid>
 only activate the raid sets with the given UUID
 
@@ -192,7 +201,7 @@ This is supported by dracut but not recommended.
 
 .SH iSCSI
 .TP
-.B root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+.B root=iscsi:[username:password[reverse:password]@][<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
 protocol defaults to "6", LUN defaults to "0".
 
 If the "servername" field is provided by BOOTP or DHCP, then that
@@ -205,22 +214,27 @@ associated fields.
 http://tools.ietf.org/html/rfc4173
 
 .TP
-.B root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+.B root=iscsi:[username:password[:reverse:password]@][<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
 e.g. root=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0
-
 .TP
-.B root=??? netroot=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname> ...
+.B root=??? netroot=iscsi:[username:password[:reverse:password]@][<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname> ...
 multiple netroot options allow setting up multiple iscsi disks
 e.g. 
    root=UUID=12424547 netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0 netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target1
 .B not yet implemented
 .TP
 .B root=??? iscsi_initiator= iscsi_target_name= iscsi_target_ip= iscsi_target_port= iscsi_target_group= iscsi_username=  iscsi_password= iscsi_in_username= iscsi_in_password=
-
 .TP
 .B root=??? iscsi_firmware
 will read the iscsi parameter from the BIOS firmware
 
+.SH FCoE
+.TP
+.B netroot=fcoe:<interface|MAC>:<dcb|nodcb>
+Try to connect to a FCoE SAN through the NIC specified by <interface> or <MAC>,
+for the second argument, currently only nodcb is supported. Note letters in
+the MAC-address must be lowercase!
+
 .SH NBD
 .TP
 .B root=nbd:<server>:<port>[:<fstype>][:<mountopts>]
@@ -244,6 +258,18 @@ get ip from dhcp server on a specific interface
 .B ip=<client-IP-number>:[<server-id>]:<gateway-IP-number>:<netmask>:<client-hostname>:<interface>:{none|off}
 explicit network configuration
 
+.SH Plymouth Boot Splash
+.TP
+.B rd_NO_PLYMOUTH
+do not start plymouth. This will not work with encrypted partitions.
+
+.TP
+.B ifname=<interface>:<MAC>
+Assign network device name <interface> (ie eth0) to the NIC with MAC <MAC>.
+Note letters in the MAC-address must be lowercase!
+Note that if you use this option you \fBmust\fR specify an ifname= argument
+for all interfaces used in ip= or fcoe= arguments
+
 .SH Misc
 .TP
 .B rdblacklist=<drivername>
@@ -251,6 +277,9 @@ do not load kernel module <drivername>
 
 .SH Debug
 .TP
+.B rdinfo
+print informational output though "quiet" is set
+.TP
 .B rdshell
 allow dropping to a shell, if root mounting fails
 .TP
@@ -260,7 +289,7 @@ set -x for the dracut shell
 .B rdbreak
 drop to a shell at the end
 .TP
-.B rdbreak={pre-udev|pre-mount|mount|pre-pivot|commandline|initqueue}
+.B rdbreak={cmdline|pre-udev|pre-trigger|initqueue|pre-mount|mount|pre-pivot}
 drop to a shell on defined breakpoint
 .TP
 .B rdudevinfo

dracut.conf

@@ -6,5 +6,12 @@
 # Dracut modules to omit
 #omit_dracutmodules=""
 
-# Additional kernel modules to install
-#drivers=""
+# additional kernel modules to the default
+#add_drivers=""
+
+# build initrd only to boot current hardware
+#hostonly="-h"
+#
+
+# install local /etc/mdadm.conf
+mdadmconf="yes"

dracut.spec

@@ -1,18 +1,18 @@
 %if 0%{?fedora} < 12
 %define with_switch_root 1
 %else
-%define with_switch_root 1
+%define with_switch_root 0
 %endif
 
 %if %{defined gittag}
-%define rdist 1.git%{gittag}%{?dist}
+%define rdist .git%{gittag}%{?dist}
 %define dashgittag -%{gittag}
 %else
 %define rdist %{?dist}
 %endif
 
 Name: dracut
-Version: 0.7
+Version: 002
 Release: 1%{?rdist}
 Summary: Initramfs generator using udev
 Group: System Environment/Base		
@@ -22,49 +22,61 @@ Source0: dracut-%{version}%{?dashgittag}.tar.bz2
 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
 Requires: udev
 Requires: util-linux-ng
-Requires: module-init-tools
+Requires: module-init-tools >= 3.7-9
 Requires: cpio
 Requires: coreutils
 Requires: findutils
 Requires: binutils
 Requires: grep
-Requires: mktemp
+Requires: which
+Requires: mktemp >= 1.5-5
 Requires: mount
 Requires: bash
+Requires: dash
 Requires: /bin/sh 
-Requires: fileutils, grep, mount, gzip, tar, mktemp >= 1.5-5, findutils
+Requires: fileutils, gzip, tar
 Requires: lvm2 >= 2.02.33-9, dhclient
 Requires: filesystem >= 2.1.0, cpio, device-mapper, initscripts >= 8.63-1
 Requires: e2fsprogs >= 1.38-12, libselinux, libsepol, coreutils
 Requires: mdadm, elfutils-libelf, plymouth >= 0.7.0
 Requires: cryptsetup-luks
-Requires: bridge-utils
-%ifnarch s390 s390x
+Requires: file
+Requires: bzip2
 Requires: dmraid
 Requires: kbd
-%endif
+Requires: plymouth-scripts
 
 %if ! 0%{?with_switch_root}
-Requires: /sbin/switch_root
+Requires: util-linux-ng >= 2.16
 BuildArch: noarch
 %endif
 
 %description
 dracut is a new, event-driven initramfs infrastructure based around udev.
 
-%package generic
-Summary: Metapackage to build a generic initramfs with dracut
+%package network
+Summary: dracut modules to build a dracut initramfs with network support
 Requires: %{name} = %{version}-%{release}
 Requires: rpcbind nfs-utils 
 Requires: iscsi-initiator-utils
 Requires: nbd
 Requires: net-tools iproute
-Requires: plymouth-system-theme plymouth-theme-charge plymouth-theme-solar
+Requires: bridge-utils
+
+%description network
+This package requires everything which is needed to build a generic
+all purpose initramfs with network support with dracut.
+
+%package generic
+Summary: Metapackage to build a generic initramfs with dracut
+Requires: %{name} = %{version}-%{release}
+Requires: %{name}-network = %{version}-%{release}
 
 %description generic
 This package requires everything which is needed to build a generic
 all purpose initramfs with dracut.
 
+
 %package kernel
 Summary: Metapackage to build generic initramfs with dracut with only kernel modules
 Requires: %{name} = %{version}-%{release}
@@ -80,12 +92,10 @@ kernel modules and firmware files needed by dracut modules.
 
 %package tools
 Summary: dracut tools to build the local initramfs
-Requires: %{name} = %{version}-%{release}
-Requires: ql2100-firmware
-Requires: ql2200-firmware
-Requires: ql23xx-firmware
-Requires: ql2400-firmware
-Requires: ql2500-firmware
+Requires: coreutils cryptsetup-luks device-mapper
+Requires: diffutils dmraid findutils gawk grep lvm2
+Requires: module-init-tools sed
+Requires: cpio gzip
 
 %description tools
 This package contains tools to assemble the local initrd and host configuration.
@@ -96,10 +106,12 @@ This package contains tools to assemble the local initrd and host configuration.
 %build
 make
 
-
 %install
 rm -rf $RPM_BUILD_ROOT
-make install DESTDIR=$RPM_BUILD_ROOT sbindir=/sbin sysconfdir=/etc mandir=%{_mandir}
+make install DESTDIR=$RPM_BUILD_ROOT sbindir=/sbin \
+     sysconfdir=/etc mandir=%{_mandir}
+
+echo %{name}-%{version}-%{release} > $RPM_BUILD_ROOT/%{_datadir}/dracut/modules.d/10rpmversion/dracut-version
 
 %if ! 0%{?with_switch_root}
 rm -f $RPM_BUILD_ROOT/sbin/switch_root
@@ -113,28 +125,54 @@ rm -rf $RPM_BUILD_ROOT
 
 %files
 %defattr(-,root,root,0755)
-%doc README HACKING TODO COPYING AUTHORS
+%doc README HACKING TODO COPYING AUTHORS NEWS
 /sbin/dracut
 %if 0%{?with_switch_root}
 /sbin/switch_root
 %endif
 %dir %{_datadir}/dracut
 %{_datadir}/dracut/dracut-functions
-%{_datadir}/dracut/modules.d
 %config(noreplace) /etc/dracut.conf
 %{_mandir}/man8/dracut.8*
+%{_datadir}/dracut/modules.d/00dash
+%{_datadir}/dracut/modules.d/10redhat-i18n
+%{_datadir}/dracut/modules.d/10rpmversion
+%{_datadir}/dracut/modules.d/50plymouth
+%{_datadir}/dracut/modules.d/90crypt
+%{_datadir}/dracut/modules.d/90dmraid
+%{_datadir}/dracut/modules.d/90dmsquash-live
+%{_datadir}/dracut/modules.d/90kernel-modules
+%{_datadir}/dracut/modules.d/90lvm
+%{_datadir}/dracut/modules.d/90mdraid
+%{_datadir}/dracut/modules.d/95debug
+%{_datadir}/dracut/modules.d/95resume
+%{_datadir}/dracut/modules.d/95rootfs-block
+%{_datadir}/dracut/modules.d/95s390
+%{_datadir}/dracut/modules.d/95terminfo
+%{_datadir}/dracut/modules.d/95udev-rules
+%{_datadir}/dracut/modules.d/95udev-rules.ub810
+%{_datadir}/dracut/modules.d/98syslog
+%{_datadir}/dracut/modules.d/99base
 
-%files generic
+%files network
 %defattr(-,root,root,0755)
-%doc README.generic
+%{_datadir}/dracut/modules.d/40network
+%{_datadir}/dracut/modules.d/95fcoe
+%{_datadir}/dracut/modules.d/95iscsi
+%{_datadir}/dracut/modules.d/95nbd
+%{_datadir}/dracut/modules.d/95nfs
 
 %files kernel 
 %defattr(-,root,root,0755)
 %doc README.kernel
 
+%files generic
+%defattr(-,root,root,0755)
+%doc README.generic
+
 %files tools 
 %defattr(-,root,root,0755)
-%doc COPYING
+%doc COPYING NEWS
 /sbin/dracut-gencmdline
 /sbin/dracut-catimages
 %dir /boot/dracut
@@ -142,20 +180,81 @@ rm -rf $RPM_BUILD_ROOT
 %dir /var/lib/dracut/overlay
 
 %changelog
+* Thu Sep 17 2009 Harald Hoyer <harald@redhat.com> 002-1
+- version 002
+- set correct PATH
+- workaround for broken mdmon implementation
+
+* Wed Sep 16 2009 Harald Hoyer <harald@redhat.com> 001-12
+- removed lvm/mdraid/dmraid lock files
+- add missing ifname= files
+
+* Wed Sep 16 2009 Harald Hoyer <harald@redhat.com> 001-11
+- generate dracut-version during rpm build time
+
+* Tue Sep 15 2009 Harald Hoyer <harald@redhat.com> 001-10
+- add ifname= argument for persistent netdev names
+- new /initqueue-finished to check if the main loop can be left
+- copy mdadm.conf if --mdadmconf set or mdadmconf in dracut.conf
+
+* Wed Sep 09 2009 Harald Hoyer <harald@redhat.com> 001-9
+- added Requires: plymouth-scripts
+
+* Wed Sep 09 2009 Harald Hoyer <harald@redhat.com> 001-8
+- plymouth: use plymouth-populate-initrd
+- add add_drivers for dracut and dracut.conf
+- do not mount /proc and /selinux manually in selinux-load-policy
+
+* Wed Sep 09 2009 Harald Hoyer <harald@redhat.com> 001-7
+- add scsi_wait_scan to be sure everything was scanned
+
+* Tue Sep 08 2009 Harald Hoyer <harald@redhat.com> 001-6
+- fixed several problems with md raid containers
+- fixed selinux policy loading
+
+* Tue Sep 08 2009 Harald Hoyer <harald@redhat.com> 001-5
+- patch does not honor file modes, fixed them manually
+
+* Mon Sep 07 2009 Harald Hoyer <harald@redhat.com> 001-4
+- fixed mdraid for IMSM
+
+* Mon Sep 07 2009 Harald Hoyer <harald@redhat.com> 001-3
+- fixed bug, which prevents installing 61-persistent-storage.rules (bug #520109)
+
+* Thu Sep 03 2009 Harald Hoyer <harald@redhat.com> 001-2
+- fixed missing grep for md
+- reorder cleanup
+
+* Wed Sep 02 2009 Harald Hoyer <harald@redhat.com> 001-1
+- version 001
+- see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS
+
+* Fri Aug 14 2009 Harald Hoyer <harald@redhat.com> 0.9-1
+- version 0.9
+
+* Thu Aug 06 2009 Harald Hoyer <harald@redhat.com> 0.8-1
+- version 0.8 
+- see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS
+
 * Fri Jul 24 2009 Harald Hoyer <harald@redhat.com> 0.7-1
 - version 0.7
+- see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS
 
 * Wed Jul 22 2009 Harald Hoyer <harald@redhat.com> 0.6-1
 - version 0.6
+- see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS
 
 * Fri Jul 17 2009 Harald Hoyer <harald@redhat.com> 0.5-1
 - version 0.5
+- see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS
 
 * Sat Jul 04 2009 Harald Hoyer <harald@redhat.com> 0.4-1
 - version 0.4
+- see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS
 
 * Thu Jul 02 2009 Harald Hoyer <harald@redhat.com> 0.3-1
 - version 0.3
+- see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS
 
 * Wed Jul 01 2009 Harald Hoyer <harald@redhat.com> 0.2-1
 - version 0.2

modules.d/10redhat-i18n/install

@@ -76,10 +76,13 @@ else
     for i in $(find /lib/kbd -type f -print); do
 	dracut_install $i
     done
+    # remove unnecessary files
+    rm -f "$initdir/lib/kbd/consoletrans/utflist" 2>/dev/null
+    find "$initdir/lib/kbd/" -name README\* -exec rm -f '{}' \;
     dracut_install gzip bzip2
 fi
 
-dracut_install /lib/udev/console_* 
+dracut_install /lib/udev/console_init 
 dracut_install setfont loadkeys
 inst_rules 10-console.rules
 inst_hook cmdline 20 "$moddir/parse-i18n.sh"

modules.d/10redhat-i18n/parse-i18n.sh

@@ -3,7 +3,6 @@ inst_key_val()
     local value
     value=$(getarg $1)
     [ -n "$value" ] && printf '%s="%s"\n' $1 $value >> $2
-    initrdargs="$initrdargs $1" 
 }
 
 mkdir -p /etc/sysconfig

modules.d/10rpmversion/check

@@ -0,0 +1,3 @@
+#!/bin/sh
+[ -f /etc/redhat-release ]
+

modules.d/10rpmversion/install

@@ -0,0 +1,11 @@
+if [ -e "$moddir/dracut-version" ]; then
+    dracut_rpm_version=$(cat "$moddir/dracut-version")
+    inst "$moddir/dracut-version" /$dracut_rpm_version
+else
+    if rpm -qf $(which $0) &>/dev/null; then
+        dracut_rpm_version=$(rpm -qf --qf '%{name}-%{version}-%{release}\n' $(which $0) | { ver="";while read line;do ver=$line;done;echo $ver;} )
+        echo $dracut_rpm_version > $initdir/$dracut_rpm_version
+    fi
+fi
+inst_hook cmdline 01 "$moddir/version.sh"
+

modules.d/10rpmversion/version.sh

@@ -0,0 +1,6 @@
+for i in dracut-*; do
+    if [ -f $i ]; then
+        vinfo < $i
+    fi
+done
+unset i

modules.d/40network/check

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 
 . $dracutfunctions
 

modules.d/40network/dhclient-script

@@ -23,12 +23,12 @@ setup_interface() {
 
     [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
 
-    [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
+    [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/resolv.conf
     if  [ -n "$namesrv" ] ; then
 	for s in $namesrv; do
 	    echo nameserver $s 
 	done
-    fi >> /tmp/net.$netif.resolv.conf
+    fi >> /tmp/resolv.conf
 
     [ -n "$hostname" ] && echo hostname $hostname > /tmp/net.$netif.hostname
 }

modules.d/40network/dhcp-root.sh

@@ -17,4 +17,5 @@ if [ "$root" = "dhcp" ] || [ "$netroot" = "dhcp" ] ; then
 
     # Shut up init error check
     [ -z "$root" ] && root="dhcp"
+    echo '[ -d $NEWROOT/proc -o -e /dev/root ]' > /initqueue-finished/dhcp.sh
 fi

modules.d/40network/ifname-genrules.sh

@@ -0,0 +1,21 @@
+#!/bin/sh
+
+# if there are no ifname parameters, just use NAME=KERNEL
+if ! getarg ifname= >/dev/null ; then
+    echo 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="?*", ATTR{type}=="1", NAME="%k"' \
+        > /etc/udev/rules.d/50-ifname.rules
+    return
+fi
+
+{
+    for p in $(getargs ifname=); do
+        parse_ifname_opts $p
+	printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="%s", ATTR{type}=="1", NAME="%s"\n' "$ifname_mac" "$ifname_if"
+    done
+
+    # Rename non named interfaces out of the way for named ones.
+    for p in $(getargs ifname=); do
+        parse_ifname_opts $p
+	printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="?*", ATTR{type}=="1", NAME!="?*", KERNEL=="%s", NAME="%%k-renamed"\n' "$ifname_if"
+    done
+} > /etc/udev/rules.d/50-ifname.rules

modules.d/40network/install

@@ -4,14 +4,14 @@ inst "$moddir/ifup" "/sbin/ifup"
 inst "$moddir/netroot" "/sbin/netroot"
 inst "$moddir/dhclient-script" "/sbin/dhclient-script"
 inst "$moddir/dhclient.conf" "/etc/dhclient.conf" 
+inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
 inst_hook pre-udev 60 "$moddir/net-genrules.sh"
 inst_hook cmdline 91 "$moddir/dhcp-root.sh"
 inst_hook cmdline 99 "$moddir/parse-ip-opts.sh"
 inst_hook cmdline 98 "$moddir/parse-bridge.sh"
+inst_hook cmdline 99 "$moddir/parse-ifname.sh"
 inst_hook pre-pivot 10 "$moddir/kill-dhclient.sh"
 
 # TODO ifcfg config style is redhat specific, this should probably
 # go into its own module at one time
 inst_hook pre-pivot 85 "$moddir/write-ifcfg.sh"
-
-mkdir -p "${initdir}/var/run"

modules.d/40network/installkernel

@@ -1,14 +1,16 @@
 #!/bin/bash
 # Include wired net drivers, excluding wireless
-for modname in $(find "$srcmods/kernel/drivers" -name '*.ko'); do
-  if nm -uPA $modname | grep -q eth_type_trans; then
-    if echo "$modname" | grep -q wireless; then
-      continue
-    else
-      instmods $modname 
-    fi
-  fi
-done
+
+net_module_test() {
+    local net_drivers='eth_type_trans|register_virtio_device'
+    local unwanted_drivers='/(wireless|isdn|uwb)/'
+    nm -uPA "$1" | egrep -q $net_drivers && \
+	nm -uPA "$1" | egrep -qv 'iw_handler_get_spy' && \
+	[[ ! $1 =~ $unwanted_drivers ]]
+}
+
+instmods $(filter_kernel_modules net_module_test)
+    
 instmods ecb arc4
 # bridge modules
 instmods bridge stp llc

modules.d/40network/net-genrules.sh

@@ -29,7 +29,7 @@ fix_bootif() {
     # If we have to handle multiple interfaces, handle only them.
     elif [ -n "$IFACES" ] ; then
 	for iface in $IFACES ; do
-	    printf 'ACTION=="add", SUBSYSTEM=="net", KERNEL=="%s", RUN+="/sbin/ifup $env{INTERFACE}"\n' "$iface"
+	    printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/ifup $env{INTERFACE}"\n' "$iface"
 	done
 
     # Default: We don't know the interface to use, handle all

modules.d/40network/netroot

@@ -90,7 +90,7 @@ done
 
 [ -e /tmp/net.$netif.gw ]          && . /tmp/net.$netif.gw
 [ -e /tmp/net.$netif.hostname ]    && . /tmp/net.$netif.hostname
-[ -e /tmp/net.$netif.resolv.conf ] && cp -f /tmp/net.$netif.resolv.conf /etc/resolv.conf
+[ -e /tmp/resolv.conf ] && cp -f /tmp/resolv.conf /etc/resolv.conf
 
 # Source netroot hooks before we start the handler
 source_all netroot

modules.d/40network/parse-bridge.sh

@@ -37,7 +37,6 @@ unset bridgename ethname
 
 # Parse bridge for bridgename and ethname
 if getarg bridge >/dev/null; then
-    initrdargs="$initrdargs bridge" 
     # Read bridge= parameters if they exist
     bridge="$(getarg bridge=)"
     if [ ! "$bridge" = "bridge" ]; then 

modules.d/40network/parse-ifname.sh

@@ -0,0 +1,37 @@
+#!/bin/sh
+#
+# Format:
+#	ifname=<interface>:<mac>
+#
+# Note letters in the macaddress must be lowercase!
+#
+# Examples:
+# ifname=eth0:4a:3f:4c:04:f8:d7
+#
+# Note when using ifname= to get persistent interface names, you must specify
+# an ifname= argument for each interface used in an ip= or fcoe= argument
+
+# check if there are any ifname parameters
+if ! getarg ifname= >/dev/null ; then
+    return
+fi
+
+parse_ifname_opts() {
+    local IFS=:
+    set $1
+
+    case $# in
+        7)
+            ifname_if=$1
+            ifname_mac=$2:$3:$4:$5:$6:$7
+            ;;
+        *)
+            die "Invalid arguments for ifname="
+            ;;
+    esac
+}
+
+# Check ifname= lines
+for p in $(getargs ifname=); do
+    parse_ifname_opts $p
+done

modules.d/40network/write-ifcfg.sh

@@ -8,42 +8,45 @@ udevadm settle --timeout=30
 read IFACES < /tmp/net.ifaces
 
 for netif in $IFACES ; do
+    mkdir -p /tmp/ifcfg/
     # bridge?
     unset bridge
     if [ "$netif" = "$bridgename" ]; then
         bridge=yes
     fi
     cat /sys/class/net/$netif/address > /tmp/net.$netif.hwaddr
-    echo "# Generated by dracut initrd" > /tmp/net.$netif.ifcfg
-    echo "DEVICE=$netif" >> /tmp/net.$netif.ifcfg
-    echo "ONBOOT=yes" >> /tmp/net.$netif.ifcfg
+    echo "# Generated by dracut initrd" > /tmp/ifcfg/ifcfg-$netif
+    echo "DEVICE=$netif" >> /tmp/ifcfg/ifcfg-$netif
+    echo "ONBOOT=yes" >> /tmp/ifcfg/ifcfg-$netif
+    echo "NETBOOT=yes" >> /tmp/ifcfg/ifcfg-$netif
     if [ -f /tmp/net.$netif.lease ]; then
-	echo "BOOTPROTO=dhcp" >> /tmp/net.$netif.ifcfg
+	echo "BOOTPROTO=dhcp" >> /tmp/ifcfg/ifcfg-$netif
     else
-	echo "BOOTPROTO=none" >> /tmp/net.$netif.ifcfg
+	echo "BOOTPROTO=none" >> /tmp/ifcfg/ifcfg-$netif
         # If we've booted with static ip= lines, the override file is there
 	. /tmp/net.$netif.override 
-	echo "IPADDR=$ip" >> /tmp/net.$netif.ifcfg
-	echo "NETMASK=$mask" >> /tmp/net.$netif.ifcfg
-	[ -n "$gw" ] && echo "GATEWAY=$gw" >> /tmp/net.$netif.ifcfg
+	echo "IPADDR=$ip" >> /tmp/ifcfg/ifcfg-$netif
+	echo "NETMASK=$mask" >> /tmp/ifcfg/ifcfg-$netif
+	[ -n "$gw" ] && echo "GATEWAY=$gw" >> /tmp/ifcfg/ifcfg-$netif
     fi
 
     # bridge needs differente things written to ifcfg
     if [ -z "$bridge" ]; then
         # standard interface
-        echo "HWADDR=$(cat /sys/class/net/$netif/address)" >> /tmp/net.$netif.ifcfg
-        echo "TYPE=Ethernet" >> /tmp/net.$netif.ifcfg
-        echo "NAME=\"Boot Disk\"" >> /tmp/net.$netif.ifcfg
+        echo "HWADDR=$(cat /sys/class/net/$netif/address)" >> /tmp/ifcfg/ifcfg-$netif
+        echo "TYPE=Ethernet" >> /tmp/ifcfg/ifcfg-$netif
+        echo "NAME=\"Boot Disk\"" >> /tmp/ifcfg/ifcfg-$netif
     else
         # bridge
-	echo "TYPE=Bridge" >> /tmp/net.$netif.ifcfg
-        echo "NAME=\"Boot Disk\"" >> /tmp/net.$netif.ifcfg
+	echo "TYPE=Bridge" >> /tmp/ifcfg/ifcfg-$netif
+        echo "NAME=\"Boot Disk\"" >> /tmp/ifcfg/ifcfg-$netif
         # write separate ifcfg file for the raw eth interface
-        echo "DEVICE=$ethname" >> /tmp/net.$ethname.ifcfg
-        echo "TYPE=Ethernet" >> /tmp/net.$ethname.ifcfg
-        echo "ONBOOT=yes" >> /tmp/net.$ethname.ifcfg
-        echo "HWADDR=$(cat /sys/class/net/$ethname/address)" >> /tmp/net.$ethname.ifcfg
-        echo "BRIDGE=$netif" >> /tmp/net.$ethname.ifcfg
-        echo "NAME=$ethname" >> /tmp/net.$ethname.ifcfg
+        echo "DEVICE=$ethname" >> /tmp/ifcfg/ifcfg-$ethname
+        echo "TYPE=Ethernet" >> /tmp/ifcfg/ifcfg-$ethname
+        echo "ONBOOT=yes" >> /tmp/ifcfg/ifcfg-$ethname
+        echo "NETBOOT=yes" >> /tmp/ifcfg/ifcfg-$ethname
+        echo "HWADDR=$(cat /sys/class/net/$ethname/address)" >> /tmp/ifcfg/ifcfg-$ethname
+        echo "BRIDGE=$netif" >> /tmp/ifcfg/ifcfg-$ethname
+        echo "NAME=$ethname" >> /tmp/ifcfg/ifcfg-$ethname
     fi
 done

modules.d/50plymouth/cryptroot-ask.sh

@@ -15,14 +15,16 @@ ask=1
 
 if [ -n "$LUKS" ]; then
     ask=0
+    luuid=${2##luks-}
     for luks in $LUKS; do
-	if [ "${2##$luks}" != "$2" ]; then
+	if [ "${luuid##$luks}" != "$2" ]; then
 	    ask=1
 	fi
     done
 fi
 
 if [ $ask -gt 0 ]; then
+    info "luksOpen $1 $2"
     # flock against other interactive activities
     { flock -s 9; 
 	/bin/plymouth ask-for-password \
@@ -34,6 +36,8 @@ fi
 # mark device as asked
 >> /tmp/cryptroot-asked-$2
 
+udevsettle
+
 unset LUKS
 unset ask
 unset luks

modules.d/50plymouth/install

@@ -1,6 +1,14 @@
 #!/bin/bash
-. "$moddir"/plymouth-populate-initrd
-inst_hook cmdline 30 "$moddir/parse-plymouth.sh"
+
+if grep -q nash /usr/libexec/plymouth/plymouth-populate-initrd \
+   || ! grep -q PLYMOUTH_POPULATE_SOURCE_FUNCTIONS /usr/libexec/plymouth/plymouth-populate-initrd \
+   || [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
+    . "$moddir"/plymouth-populate-initrd
+else
+    PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
+        /usr/libexec/plymouth/plymouth-populate-initrd -t $initdir
+fi
+
 inst_hook pre-pivot 90 "$moddir"/plymouth-newroot.sh
 inst_hook pre-trigger 10 "$moddir"/plymouth-pretrigger.sh
 inst_hook emergency 50 "$moddir"/plymouth-emergency.sh

modules.d/50plymouth/parse-plymouth.sh

@@ -1,19 +0,0 @@
-initrdargs="$initrdargs rd_plytheme" 
-
-PLYMOUTH_THEMEDIR=/usr/share/plymouth/themes
-PLYMOUTH_THEME=$(getarg rd_plytheme=)
-if [ -n "$PLYMOUTH_THEME" ]; then
-    if [ -f "${PLYMOUTH_THEMEDIR}/${PLYMOUTH_THEME}/${PLYMOUTH_THEME}.plymouth" ]; then
-	info "Setting theme $PLYMOUTH_THEME"
-	(
-	    cd $PLYMOUTH_THEMEDIR;
-	    ln -fs "${PLYMOUTH_THEME}/${PLYMOUTH_THEME}.plymouth" default.plymouth 2>&1 | vinfo;       
-	)
-    else
-	warn "Theme $PLYMOUTH_THEME not found!"
-    fi
-fi
-
-unset PLYMOUTH_THEME
-unset PLYMOUTH_THEMEDIR
-

modules.d/50plymouth/plymouth-populate-initrd

@@ -34,14 +34,15 @@ if [[ $hostonly ]]; then
 	inst ${LIBDIR}/plymouth/${PLYMOUTH_PLUGIN}.so
     fi
 else
-    for x in /usr/share/plymouth/themes/*/* ; do
+    for x in /usr/share/plymouth/themes/{text,details}/* ; do
         [[ -f "$x" ]] || continue
 	THEME_DIR=$(dirname "$x")
 	mkdir -p "${initdir}/$THEME_DIR"
         dracut_install "$x"
     done
-    for x in ${LIBDIR}/plymouth/*.so ; do
+    for x in ${LIBDIR}/plymouth/{text,details}.so ; do
         [[ -f "$x" ]] || continue
+        [[ "$x" != "${x%%/label.so}" ]] && continue
         dracut_install "$x"
     done
     (

modules.d/50plymouth/plymouth-pretrigger.sh

@@ -1,18 +1,22 @@
 #!/bin/sh
 
-[ -c /dev/null ] || mknod /dev/null c 1 3
-# first trigger graphics subsystem
-udevadm trigger --attr-match=class=0x030000 >/dev/null 2>&1
-# first trigger graphics and tty subsystem
-udevadm trigger --subsystem-match=graphics --subsystem-match=drm --subsystem-match=tty >/dev/null 2>&1
+if ! getarg rd_NO_PLYMOUTH; then
+    [ -c /dev/null ] || mknod /dev/null c 1 3
+    # first trigger graphics subsystem
+    udevadm trigger --attr-match=class=0x030000 >/dev/null 2>&1
+    # first trigger graphics and tty subsystem
+    udevadm trigger --subsystem-match=graphics --subsystem-match=drm --subsystem-match=tty >/dev/null 2>&1
 
-udevadm settle --timeout=30 2>&1 | vinfo
-[ -c /dev/zero ] || mknod /dev/zero c 1 5
-[ -c /dev/systty ] || mknod /dev/systty c 4 0
-[ -c /dev/fb ] || mknod /dev/fb c 29 0
-[ -c /dev/hvc0 ] || mknod /dev/hvc0 c 229 0
+    udevadm settle --timeout=30 2>&1 | vinfo
+    [ -c /dev/zero ] || mknod /dev/zero c 1 5
+    [ -c /dev/systty ] || mknod /dev/systty c 4 0
+    [ -c /dev/fb ] || mknod /dev/fb c 29 0
+    [ -c /dev/hvc0 ] || mknod /dev/hvc0 c 229 0
 
-info "Starting plymouth daemon"
-[ -x /bin/plymouthd ] && /bin/plymouthd
-/bin/plymouth --show-splash 2>&1 | vinfo
+    info "Starting plymouth daemon"
+    [ -x /bin/plymouthd ] && /bin/plymouthd --attach-to-session
+    /bin/plymouth --show-splash 2>&1 | vinfo
+fi
 
+
+# vim:ts=8:sw=4:sts=4:et

modules.d/90crypt/70-luks.rules

@@ -7,6 +7,6 @@
 SUBSYSTEM!="block", GOTO="luks_end"
 ACTION!="add|change", GOTO="luks_end"
 
-ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="/sbin/initqueue --onetime /sbin/cryptroot-ask $env{DEVNAME} luks-$env{ID_FS_UUID}"
+ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="/sbin/initqueue --unique --onetime --name cryptroot-ask-%k /sbin/cryptroot-ask $env{DEVNAME} luks-$env{ID_FS_UUID}"
 
 LABEL="luks_end"

modules.d/90crypt/check

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 
 # if cryptsetup is not installed, then we cannot support encrypted devices.
 which cryptsetup >/dev/null 2>&1 || exit 1
@@ -6,8 +6,21 @@ which cryptsetup >/dev/null 2>&1 || exit 1
 # hostonly checking should only return true if root is on a LUKS device
 # in some way, but I am too lazy to figure out how to do that.
 # Instead, fail if we do not have a LUKS device in use somewhere.
-if [ "$1" = "-h" ] ; then
-    blkid | grep -q crypt_LUKS || exit 1
-fi
+
+. $dracutfunctions
+
+is_crypt() { [[ $(get_fs_type /dev/block/$1) = crypto_LUKS ]]; }
+
+[[ $1 = '-h' ]] && {
+    rootdev=$(find_root_block_device)
+    if [[ $rootdev ]]; then
+	# root lives on a block device, so we can be more precise about 
+	# hostonly checking
+	check_block_and_slaves is_crypt "$rootdev" || exit 1
+    else
+	# root is not on a block device, use the shotgun approach
+	blkid | grep -q crypt_LUKS || exit 1
+    fi
+}
 
 exit 0

modules.d/90crypt/crypt-cleanup.sh

@@ -0,0 +1,4 @@
+# close everything which is not busy
+for i in /dev/mapper/luks-*; do
+    cryptsetup luksClose $i >/dev/null 2>&1
+done

modules.d/90crypt/cryptroot-ask.sh

@@ -15,22 +15,24 @@ ask=1
 
 if [ -n "$LUKS" ]; then
     ask=0
+    luuid=${2##luks-}
     for luks in $LUKS; do
-	if [ "${2##$luks}" != "$2" ]; then
+	if [ "${luuid##$luks}" != "$2" ]; then
 	    ask=1
 	fi
     done
 fi
 
 if [ $ask -gt 0 ]; then
+    info "luksOpen $1 $2"
     # flock against other interactive activities
     { flock -s 9; 
 	echo -n "$1 is password protected " 
-	/sbin/cryptsetup luksOpen -T1 $1 $2
+	/sbin/cryptsetup luksOpen -T1 $1 $2 
     } 9>/.console.lock
 fi
 
 # mark device as asked
 >> /tmp/cryptroot-asked-$2
 
-exit 0
+exit 0

modules.d/90crypt/install

@@ -3,3 +3,5 @@ inst cryptsetup
 inst_rules "$moddir/70-luks.rules"
 inst "$moddir"/cryptroot-ask.sh /sbin/cryptroot-ask
 inst_hook cmdline 30 "$moddir/parse-crypt.sh"
+inst_hook pre-pivot 30 "$moddir/crypt-cleanup.sh"
+inst_hook pre-pivot 31 "$moddir/crypt-cleanup.sh"

modules.d/90crypt/parse-crypt.sh

@@ -1,5 +1,3 @@
-initrdargs="$initrdargs rd_NO_LUKS rd_LUKS_UUID" 
-
 if getarg rd_NO_LUKS; then
     info "rd_NO_LUKS: removing cryptoluks activation"
     rm -f /etc/udev/rules.d/70-luks.rules

modules.d/90dmraid/61-dmraid-imsm.rules

@@ -6,14 +6,19 @@ SUBSYSTEM!="block", GOTO="dm_end"
 ACTION!="add|change", GOTO="dm_end"
 
 ENV{ID_FS_TYPE}=="linux_raid_member", GOTO="dm_end"
-ENV{ID_FS_TYPE}=="isw_raid_member", ENV{rd_NO_MDIMSM}!="?*", GOTO="dm_end"
 
 ENV{ID_FS_TYPE}!="*_raid_member", , GOTO="dm_end"
-TEST=="/tmp/.dmraid_scan-%k", GOTO="dm_end"
 
-RUN+="/bin/sh -c '>/tmp/.dmraid_scan-%k; /bin/ln -fs /sbin/dmraid_scan /initqueue/dmraid_scan.sh'"
+ENV{ID_FS_TYPE}=="isw_raid_member", ENV{rd_NO_MDIMSM}!="?*", GOTO="dm_end"
+
+ENV{rd_NO_DM}=="?*", GOTO="dm_end"
+
+PROGRAM=="/bin/sh -c 'for i in $sys/$devpath/holders/dm-[0-9]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \
+    GOTO="dm_end"
 
 ENV{DEVTYPE}!="partition", \
     RUN+="/sbin/partx -d --nr 1-1024 $env{DEVNAME}"
 
+RUN+="/sbin/initqueue --onetime --unique --settled /sbin/dmraid_scan"
+
 LABEL="dm_end"

modules.d/90dmraid/check

@@ -4,11 +4,22 @@
 # in trying to support it in the initramfs.
 which dmraid >/dev/null 2>&1 || exit 1
 
-# Hostonly checking should really fail if the root device is not on a 
-# dmraid volume.  I am lazy.  Therefore, fail the hostonly check only
-# if we are not using dmraid right now.
-if [[ $1 = -h ]]; then
-    dmraid -r | grep -q ok || exit 1
-fi
+. $dracutfunctions
+[[ $debug ]] && set -x
+
+is_dmraid() { get_fs_type /dev/block/$1 |grep -v linux_raid_member | \
+    grep -q _raid_member; }
+
+[[ $1 = '-h' ]] && {
+    rootdev=$(find_root_block_device)
+    if [[ $rootdev ]]; then
+	# root lives on a block device, so we can be more precise about 
+	# hostonly checking
+	check_block_and_slaves is_dmraid "$rootdev" || exit 1
+    else
+	# root is not on a block device, use the shotgun approach
+	dmraid -r | grep -q ok || exit 1
+    fi
+}
 
 exit 0

modules.d/90dmraid/dmraid-cleanup.sh

@@ -0,0 +1,2 @@
+# close everything which is not busy
+dmraid -an >/dev/null 2>&1

modules.d/90dmraid/dmraid.sh

@@ -1,26 +1,37 @@
 #!/bin/sh
 
-if $UDEV_QUEUE_EMPTY >/dev/null 2>&1; then
-    [ -h "$job" ] && rm -f "$job"
-    DM_RAIDS=$(getargs rd_DM_UUID=)
-    # run dmraid if udev has settled
-    info "Scanning for dmraid devices $DM_RAIDS"
-    if [ -n "$DM_RAIDS" ]; then
-	# only activate specified DM RAIDS
-	SETS=$(dmraid -c -s)
-	info "Found dmraid sets:"
-	echo $SETS|vinfo
-	for r in $DM_RAIDS; do 
-	    for s in $SETS; do 
-		if [ "${s##$r}" != "$s" ]; then
-		    info "Activating $s"
-		    dmraid -ay $s 2>&1 | vinfo
-		fi
-	    done
-	done
-    else 
-	# scan and activate all DM RAIDS
-	dmraid -ay 2>&1 | vinfo
-    fi
+. /lib/dracut-lib.sh
+
+DM_RAIDS=$(getargs rd_DM_UUID=)
+
+# run dmraid if udev has settled
+info "Scanning for dmraid devices $DM_RAIDS"
+SETS=$(dmraid -c -s)
+
+if [ "$SETS" = "no raid disks" ]; then
+    return
 fi
 
+info "Found dmraid sets:"
+echo $SETS|vinfo
+
+if [ -n "$DM_RAIDS" ]; then
+    # only activate specified DM RAIDS
+    for r in $DM_RAIDS; do 
+	for s in $SETS; do 
+	    if [ "${s##$r}" != "$s" ]; then
+		info "Activating $s"
+                dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
+                [ -e "/dev/mapper/$s" ] && kpartx -a -p p "/dev/mapper/$s" 2>&1 | vinfo
+                udevsettle
+	    fi
+	done
+    done
+else 
+    # scan and activate all DM RAIDS
+    for s in $SETS; do
+	info "Activating $s"
+        dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
+        [ -e "/dev/mapper/$s" ] && kpartx -a -p p "/dev/mapper/$s" 2>&1 | vinfo
+    done
+fi

modules.d/90dmraid/install

@@ -1,5 +1,13 @@
 #!/bin/bash
-dracut_install dmraid partx
+dracut_install dmraid partx kpartx
 inst "$moddir/dmraid.sh" /sbin/dmraid_scan
-inst_rules 64-md-raid.rules
+
+if [ ! -x /lib/udev/vol_id ]; then
+    inst_rules 64-md-raid.rules
+fi
+
 inst_rules "$moddir/61-dmraid-imsm.rules"
+inst_hook pre-pivot 30 "$moddir/dmraid-cleanup.sh"
+inst_hook pre-pivot 31 "$moddir/dmraid-cleanup.sh"
+inst_hook pre-trigger 30 "$moddir/parse-dm.sh"
+

modules.d/90dmraid/parse-dm.sh

@@ -1,6 +1,4 @@
-initrdargs="$initrdargs rd_DM_UUID rd_NO_DM" 
-
 if getarg rd_NO_DM; then
     info "rd_NO_DM: removing DM RAID activation"
-    rm /etc/udev/rules.d/61-dmraid*.rules
-fi
+    udevproperty rd_NO_DM=1
+fi

modules.d/90dmsetup/check

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-[ -x /lib/udev/devkit-disks-dm-export ] || exit 1
-
-exit 0

modules.d/90dmsetup/install

@@ -1,8 +0,0 @@
-#!/bin/bash
-# FIXME: would be nice if we didn't have to know which rules to grab....
-# ultimately, /lib/initramfs/rules.d or somesuch which includes links/copies
-# of the rules we want so that we just copy those in would be best
-dracut_install /lib/udev/devkit-disks-dm-export /lib/udev/devkit-disks-part-id
-
-inst_rules 95-devkit-disks.rules
-    

modules.d/90dmsquash-live/check

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+# if dmsetup is not installed, then we cannot support fedora/red hat 
+# style live images
+which dmsetup >/dev/null 2>&1 || exit 1
+
+# a live host-only image doesn't really make a lot of sense
+if [ "$1" = "-h" ] ; then
+    exit 1
+fi
+
+exit 0

modules.d/90dmsquash-live/dmsquash-live-genrules.sh

@@ -0,0 +1,13 @@
+if [ "${root%%:*}" = "live" ]; then
+    (
+    printf 'KERNEL=="%s", SYMLINK+="live"\n' \
+    	${root#live:/dev/} 
+    printf 'SYMLINK=="%s", SYMLINK+="live"\n' \
+	${root#live:/dev/} 
+    printf 'KERNEL=="%s", RUN+="/sbin/initqueue --onetime --unique /sbin/dmsquash-live-root $env{DEVNAME}"\n' \
+    	${root#live:/dev/} 
+    printf 'SYMLINK=="%s", RUN+="/sbin/initqueue --onetime --unique /sbin/dmsquash-live-root $env{DEVNAME}"\n' \
+	${root#live:/dev/} 
+
+    ) >> /etc/udev/rules.d/99-live-mount.rules
+fi

modules.d/90dmsquash-live/dmsquash-live-root

@@ -0,0 +1,177 @@
+#!/bin/sh
+
+. /lib/dracut-lib.sh
+[ -f /tmp/root.info ] && . /tmp/root.info
+
+PATH=$PATH:/sbin:/usr/sbin
+
+if getarg rdlivedebug; then
+    exec > /tmp/liveroot.$$.out
+    exec 2>> /tmp/liveroot.$$.out
+    set -x
+fi
+
+[ -z "$1" ] && exit 1
+livedev="$1"
+
+# parse various live image specific options that make sense to be
+# specified as their own things
+live_dir=$(getarg live_dir)
+[ -z "$live_dir" ] && live_dir="LiveOS"
+getarg live_ram && live_ram="yes"
+getarg reset_overlay && reset_overlay="yes"
+overlay=$(getarg overlay)
+
+# FIXME: we need to be able to hide the plymouth splash for the check really
+[ -e $livedev ] & fs=$(blkid -s TYPE -o value $livedev)
+if [ "$fs" = "iso9660" -o "$fs" = "udf" ]; then
+    check="yes"
+fi
+getarg check || check=""
+if [ -n "$check" ]; then
+    checkisomd5 --verbose $livedev || :
+    if [ $? -ne 0 ]; then
+	echo "CD check failed!"
+	exit 1
+    fi
+fi
+
+getarg ro && liverw=ro
+getarg rw && liverw=rw
+[ -z "$liverw" ] && liverw=ro
+# mount the backing of the live image first
+mount -n -t $fstype -o $liverw $livedev $NEWROOT
+RES=$?
+if [ "$RES" != "0" ]; then
+    echo "Failed to mount block device of live image"
+    exit 1
+fi
+
+# overlay setup helper function
+do_live_overlay() {
+    # create a sparse file for the overlay
+    # overlay: if non-ram overlay searching is desired, do it,
+    #              otherwise, create traditional overlay in ram
+    OVERLAY_LOOPDEV=$( losetup -f )
+
+    l=$(blkid -s LABEL -o value $livedev) || l=""
+    u=$(blkid -s UUID -o value $livedev) || u=""
+
+    if [ -z "$overlay" ]; then
+        pathspec="/${live_dir}/overlay-$l-$u"
+    elif ( echo $overlay | grep -q ":" ); then
+        # pathspec specified, extract
+        pathspec=$( echo $overlay | sed -e 's/^.*://' )
+    fi
+
+    if [ -z "$pathspec" -o "$pathspec" = "auto" ]; then
+        pathspec="/${live_dir}/overlay-$l-$u"
+    fi
+    devspec=$( echo $overlay | sed -e 's/:.*$//' )
+
+    # need to know where to look for the overlay
+    setup=""
+    if [ -n "$devspec" -a -n "$pathspec" -a -n "$overlay" ]; then
+        mkdir /overlayfs
+        mount -n -t auto $devspec /overlayfs || :
+        if [ -f /overlayfs$pathspec -a -w /overlayfs$pathspec ]; then
+            losetup $OVERLAY_LOOPDEV /overlayfs$pathspec
+            if [ -n "$reset_overlay" ]; then
+               dd if=/dev/zero of=$OVERLAY_LOOPDEV bs=64k count=1 2>/dev/null
+            fi
+            setup="yes"
+        fi
+        umount -l /overlayfs || :
+    fi
+
+    if [ -z "$setup" ]; then
+        if [ -n "$devspec" -a -n "$pathspec" ]; then
+           echo "Unable to find persistent overlay; using temporary"
+           sleep 5
+        fi
+
+        dd if=/dev/null of=/overlay bs=1024 count=1 seek=$((512*1024)) 2> /dev/null
+        losetup $OVERLAY_LOOPDEV /overlay
+    fi
+
+    # set up the snapshot
+    echo 0 `blockdev --getsize $BASE_LOOPDEV` snapshot $BASE_LOOPDEV $OVERLAY_LOOPDEV p 8 | dmsetup create live-rw
+}
+
+# live cd helper function
+do_live_from_base_loop() {
+    do_live_overlay
+}
+
+# we might have a genMinInstDelta delta file for anaconda to take advantage of
+if [ -e $NEWROOT/${live_dir}/osmin.img ]; then
+    OSMINSQFS=$NEWROOT/${live_dir}/osmin.img
+fi
+
+if [ -n "$OSMINSQFS" ]; then
+    # decompress the delta data
+    dd if=$OSMINSQFS of=/osmin.img 2> /dev/null
+    OSMIN_SQUASHED_LOOPDEV=$( losetup -f )
+    losetup -r $OSMIN_SQUASHED_LOOPDEV /osmin.img
+    mkdir -p /squashfs.osmin
+    mount -n -t squashfs -o ro $OSMIN_SQUASHED_LOOPDEV /squashfs.osmin
+    OSMIN_LOOPDEV=$( losetup -f )
+    losetup -r $OSMIN_LOOPDEV /squashfs.osmin/osmin
+    umount -l /squashfs.osmin
+fi
+
+# we might have just an embedded ext3 to use as rootfs (uncompressed live)
+if [ -e $NEWROOT/${live_dir}/ext3fs.img ]; then
+  EXT3FS="$NEWROOT/${live_dir}/ext3fs.img"
+fi
+
+if [ -n "$EXT3FS" ] ; then
+    BASE_LOOPDEV=$( losetup -f )
+    losetup -r $BASE_LOOPDEV $EXT3FS
+    umount -l $NEWROOT
+
+    do_live_from_base_loop
+fi
+
+# we might have an embedded ext3 on squashfs to use as rootfs (compressed live)
+if [ -e $NEWROOT/${live_dir}/squashfs.img ]; then
+  SQUASHED="$NEWROOT/${live_dir}/squashfs.img"
+fi
+
+if [ -e "$SQUASHED" ] ; then
+    if [ -n "$live_ram" ] ; then
+        echo "Copying live image to RAM..."
+        echo "(this may take a few minutes)"
+        dd if=$SQUASHED of=/squashed.img bs=512 2> /dev/null
+        umount -n $NEWROOT
+        echo "Done copying live image to RAM."
+        eject -p $livedev || :
+        SQUASHED="/squashed.img"
+    fi
+
+    SQUASHED_LOOPDEV=$( losetup -f )
+    losetup -r $SQUASHED_LOOPDEV $SQUASHED
+    mkdir -p /squashfs
+    mount -n -t squashfs -o ro $SQUASHED_LOOPDEV /squashfs
+
+    BASE_LOOPDEV=$( losetup -f )
+    losetup -r $BASE_LOOPDEV /squashfs/LiveOS/ext3fs.img
+
+    umount -l /squashfs
+    if [ -z "$live_ram" ] ; then
+        umount -l $NEWROOT
+    fi
+
+    do_live_from_base_loop
+fi
+
+if [ -b "$OSMIN_LOOPDEV" ]; then
+    # set up the devicemapper snapshot device, which will merge
+    # the normal live fs image, and the delta, into a minimzied fs image
+    echo "0 $( blockdev --getsize $BASE_LOOPDEV ) snapshot $BASE_LOOPDEV $OSMIN_LOOPDEV p 8" | dmsetup create --readonly live-osimg-min
+fi
+
+ln -s /dev/mapper/live-rw /dev/root
+printf '/bin/mount /dev/mapper/live-rw %s\n' "$NEWROOT" > /mount/01-$$-live.sh
+
+exit 0

modules.d/90dmsquash-live/install

@@ -0,0 +1,21 @@
+#!/bin/bash
+dracut_install umount
+inst dmsetup
+inst blkid
+inst dd
+inst losetup
+
+# eject might be a symlink to consolehelper
+if [ -L /usr/bin/eject ]; then
+    dracut_install /usr/sbin/eject
+else
+    inst eject
+fi
+
+inst blockdev
+which checkisomd5 >/dev/null 2>&1 && inst checkisomd5
+inst_hook cmdline 30 "$moddir/parse-dmsquash-live.sh"
+inst_hook pre-udev 30 "$moddir/dmsquash-live-genrules.sh"
+inst "$moddir/dmsquash-live-root" "/sbin/dmsquash-live-root"
+# should probably just be generally included
+inst_rules 60-cdrom_id.rules

modules.d/90dmsquash-live/parse-dmsquash-live.sh

@@ -0,0 +1,40 @@
+# live images are specified with
+# root=live:backingdev
+
+[ -z "$root" ] && root=$(getarg root=)
+
+# support legacy syntax of passing liveimg and then just the base root
+if getarg liveimg; then
+    liveroot="live:$root"
+fi
+
+if [ "${root%%:*}" = "live" ] ; then
+    liveroot=$root
+fi
+
+[ "${liveroot%%:*}" = "live" ] || return
+
+case "$liveroot" in
+    live:LABEL=*|LABEL=*)
+	root="${root#live:}"
+	root="$(echo $root | sed 's,/,\\x2f,g')"
+	root="live:/dev/disk/by-label/${root#LABEL=}"
+        rootok=1 ;;
+    live:CDLABEL=*|CDLABEL=*)
+	root="${root#live:}"
+	root="$(echo $root | sed 's,/,\\x2f,g')"
+	root="live:/dev/disk/by-label/${root#CDLABEL=}"
+        rootok=1 ;;
+    live:UUID=*|UUID=*)
+	root="${root#live:}"
+	root="live:/dev/disk/by-uuid/${root#UUID=}"
+        rootok=1 ;;
+    /dev/*)
+	root="live:${root}"
+        rootok=1 ;;
+esac
+echo "root was $root, liveroot is now $liveroot"
+
+
+# make sure that init doesn't complain
+[ -z "$root" ] && root="live"

modules.d/90kernel-modules/installkernel

@@ -1,11 +1,23 @@
 #!/bin/bash
-if [ -z "$drivers" ]; then
-  drivers="sd_mod =fs"
-  # Include block controller drivers
-  for modname in $(find "$srcmods/kernel/drivers" -name '*.ko'); do
-    if nm -uPA $modname | egrep -q 'ata_scsi_ioctl|scsi_add_host|blk_init_queue|register_mtd_blktrans|scsi_esp_register'; then
-      drivers="${drivers} $modname"
+if [[ -z $drivers ]]; then
+    block_module_test() {
+	local blockfuncs='ata_scsi_ioctl|scsi_add_host|blk_init_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device'
+
+	 nm -uPA "$1" | egrep -q "$blockfuncs"
+    }
+    instmods pcmcia sd_mod $(filter_kernel_modules block_module_test) "=drivers/pcmcia"
+    # if not on hostonly mode, install all known filesystems.
+    if [[ $hostonly = '' ]]; then
+	instmods '=fs'
+    else
+	instmods $(get_fs_type "/dev/block/$(find_root_block_device)")
     fi
-  done
+    # hardcoded list of exceptions
+    rm -fr ${initdir}/lib/modules/*/kernel/fs/ocfs2
+else
+  instmods $drivers
 fi
-instmods $drivers
+
+[[ $add_drivers ]] && instmods $add_drivers
+
+instmods scsi_wait_scan

modules.d/90lvm/64-lvm-vol_id.rules

@@ -1,22 +0,0 @@
-# hacky rules to try to activate lvm when we get new block devs...
-#
-# Copyright 2008, Red Hat, Inc.
-# Jeremy Katz <katzj@redhat.com>
-
-
-SUBSYSTEM!="block", GOTO="lvm_end"
-ACTION!="add|change", GOTO="lvm_end"
-
-KERNEL=="dm-[0-9]*", IMPORT{program}="vol_id --export $tempnode"
-KERNEL=="md[0-9]*|md/*", IMPORT{program}="vol_id --export $tempnode"
-
-ENV{ID_FS_TYPE}=="LVM2_member", \
-    TEST!="/tmp/.lvm_scan-%k", \
-    RUN+="/bin/sh -c '>/tmp/.lvm_scan-%k; /bin/ln -fs /sbin/lvm_scan /initqueue/lvm_scan.sh'"
-
-OPTIONS="link_priority=-100"
-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
-ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
-
-
-LABEL="lvm_end"

modules.d/90lvm/64-lvm.rules

@@ -6,17 +6,14 @@
 
 SUBSYSTEM!="block", GOTO="lvm_end"
 ACTION!="add|change", GOTO="lvm_end"
+KERNEL=="dm-[0-9]*", ACTION=="add", GOTO="lvm_end"
+ENV{ID_FS_TYPE}!="LVM2_member", GOTO="lvm_end"
 
-KERNEL=="dm-[0-9]*", IMPORT{program}="/sbin/blkid -o udev -p $tempnode"
-KERNEL=="md[0-9]*|md/*", IMPORT{program}="/sbin/blkid -o udev -p $tempnode"
 
-ENV{ID_FS_TYPE}=="LVM2_member", \
-    TEST!="/tmp/.lvm_scan-%k", \
-    RUN+="/bin/sh -c '>/tmp/.lvm_scan-%k; /bin/ln -fs /sbin/lvm_scan /initqueue/lvm_scan.sh'"
-
-OPTIONS="link_priority=-100"
-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
-ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
+PROGRAM=="/bin/sh -c 'for i in $sys/$devpath/holders/dm-[0-9]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \
+    GOTO="lvm_end"
 
+RUN+="/sbin/initqueue --settled --onetime --unique /sbin/lvm_scan"
+RUN+="/bin/sh -c '>/tmp/.lvm_scan-%k;'"
 
 LABEL="lvm_end"

modules.d/90lvm/check

@@ -1,13 +1,23 @@
-#!/bin/sh
+#!/bin/bash
 
 # No point trying to support lvm if the binaries are missing
 which lvm >/dev/null 2>&1 || exit 1
 
-# We should really just check to see if root is on a logical volume
-# when running in hostonly mode. I am lazy. Therefore, fail the hostonly
-# check unless there is a logical volume in use somewhere.
-if [ "$1" = "-H" ] || [ "$1" = "--hostonly" ]; then
-    blkid | grep -q lvm2pv || exit 1
-fi
+. $dracutfunctions
+[[ $debug ]] && set -x
+
+is_lvm() { [[ $(get_fs_type /dev/block/$1) = LVM2_member ]]; }
+
+[[ $1 = '-h' ]] && {
+    rootdev=$(find_root_block_device)
+    if [[ $rootdev ]]; then
+	# root lives on a block device, so we can be more precise about 
+	# hostonly checking
+	check_block_and_slaves is_lvm "$rootdev" || exit 1
+    else
+	# root is not on a block device, use the shotgun approach
+	blkid | grep -q LVM2_member || exit 1
+    fi
+}
 
 exit 0

modules.d/90lvm/install

@@ -1,10 +1,7 @@
 #!/bin/bash
 inst lvm
-if [ -x /lib/udev/vol_id ]; then
-    inst_rules "$moddir/64-lvm-vol_id.rules" 64-device-mapper.rules
-else
-    inst_rules "$moddir/64-lvm.rules" 64-device-mapper.rules
-fi
+
+inst_rules "$moddir/64-lvm.rules" 64-lvm.rules
 
 if [[ $hostonly ]]; then 
     [ -f /etc/lvm/lvm.conf ] && inst /etc/lvm/lvm.conf
@@ -12,3 +9,5 @@ fi
 
 inst "$moddir/lvm_scan.sh" /sbin/lvm_scan
 inst_hook cmdline 30 "$moddir/parse-lvm.sh"
+inst_hook pre-pivot 30 "$moddir/lvm-cleanup.sh"
+inst_hook pre-pivot 31 "$moddir/lvm-cleanup.sh"

modules.d/90lvm/lvm-cleanup.sh

@@ -0,0 +1,2 @@
+# stop everything which is not busy
+lvm vgchange -a n >/dev/null 2>&1

modules.d/90lvm/lvm_scan.sh

@@ -1,37 +1,35 @@
 #!/bin/sh
 
-if $UDEV_QUEUE_EMPTY >/dev/null 2>&1; then
-    [ -h "$job" ] && rm -f "$job"
-    # run lvm scan if udev has settled
+# run lvm scan if udev has settled
 
-    VGS=$(getargs rd_LVM_VG=)
+. /lib/dracut-lib.sh
 
-    [ -d /etc/lvm ] || mkdir -p /etc/lvm
-    # build a list of devices to scan
-    lvmdevs=$(
-	for f in /tmp/.lvm_scan-*; do
-	    [ -e "$f" ] || continue
-	    echo -n "${f##/tmp/.lvm_scan-} "
-	done
-	)
+VGS=$(getargs rd_LVM_VG=)
 
-    if [ ! -e /etc/lvm/lvm.conf ]; then 
-        {
-	    echo 'devices {';
-	    echo -n '    filter = [ '
-	    for dev in $lvmdevs; do
-		printf '"a|^/dev/%s$|", ' $dev;
-	    done;
-	    echo '"r/.*/" ]';
-	    echo 'types = [ "blkext", 1024 ]'
-	    echo '}';	  
-        } > /etc/lvm/lvm.conf
-	lvmwritten=1
-    fi
-    info "Scanning devices $lvmdevs for LVM volume groups $VGS"
-    lvm vgscan 2>&1 | vinfo
-    lvm vgchange -ay $VGS 2>&1 | vinfo
-    [ "$lvmwritten" ] && rm -f /etc/lvm/lvm.conf
-    unset lvmwritten
+[ -d /etc/lvm ] || mkdir -p /etc/lvm
+# build a list of devices to scan
+lvmdevs=$(
+    for f in /tmp/.lvm_scan-*; do
+	[ -e "$f" ] || continue
+	echo -n "${f##/tmp/.lvm_scan-} "
+    done
+)
+
+if [ ! -e /etc/lvm/lvm.conf ]; then 
+    {
+	echo 'devices {';
+	echo -n '    filter = [ '
+	for dev in $lvmdevs; do
+	    printf '"a|^/dev/%s$|", ' $dev;
+	done;
+	echo '"r/.*/" ]';
+	echo 'types = [ "blkext", 1024 , "cciss0", 1024 ]'
+	echo '}';	  
+    } > /etc/lvm/lvm.conf
+    lvmwritten=1
 fi
-
+info "Scanning devices $lvmdevs for LVM volume groups $VGS"
+lvm vgscan 2>&1 | vinfo
+lvm vgchange -ay $VGS 2>&1 | vinfo
+[ "$lvmwritten" ] && rm -f /etc/lvm/lvm.conf
+unset lvmwritten

modules.d/90lvm/parse-lvm.sh

@@ -1,5 +1,3 @@
-initrdargs="$initrdargs rd_NO_LVM rd_LVM_VG" 
-
 if getarg rd_NO_LVM; then
     info "rd_NO_LVM: removing LVM activation"
     rm -f /etc/udev/rules.d/64-lvm*.rules

modules.d/90mdraid/61-mdadm.rules

@@ -1 +0,0 @@
-SUBSYSTEM=="block", ACTION=="add|change", KERNEL=="md[0-9]*|md_d[0-9]*|md/*", IMPORT{program}="vol_id --export $tempnode"

modules.d/90mdraid/65-md-incremental-imsm.rules

@@ -2,24 +2,84 @@
 # automatically cause mdadm to be run.
 # See udev(8) for syntax
 
-ACTION!="add", GOTO="md_inc_end"
+ACTION!="add|change", GOTO="md_inc_end"
 SUBSYSTEM!="block", GOTO="md_inc_end"
 ENV{ID_FS_TYPE}!="linux_raid_member|isw_raid_member", GOTO="md_inc_end"
+
 ENV{ID_FS_TYPE}=="isw_raid_member", ENV{rd_NO_MDIMSM}=="?*", GOTO="md_inc_end"
 
-TEST=="/tmp/.mdraid_start-%k", GOTO="md_inc_end"
+ENV{rd_NO_MD}=="?*", GOTO="md_inc_end"
 
-IMPORT{program}="/sbin/mdadm --examine --export $tempnode"
+PROGRAM=="/bin/sh -c 'for i in $sys/$devpath/holders/md[0-9]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \
+    GOTO="md_inc_end"
+
+ENV{DEVTYPE}!="partition", \
+    RUN+="/sbin/partx -d --nr 1-1024 $env{DEVNAME}"
+
+KERNEL!="md*", IMPORT{program}="/sbin/mdadm --examine --export $tempnode"
 
 # UUID CHECK
 
 LABEL="do_md_inc"
 
-ENV{DEVTYPE}!="partition", \
-    RUN+="/sbin/partx -d --nr 1-1024 $env{DEVNAME}"
+# 
+# if rd_MDADMCONF do not assemble incrementally
+# defer auto assembly until the udev queue is settled
+# 
+ENV{rd_MDADMCONF}!="?*", GOTO="md_auto_end"
 
+RUN+="/bin/sh -c 'ln -s /sbin/md_finished.sh /initqueue-finished/md_finished.sh;/sbin/initqueue --settled --onetime --unique /sbin/mdadm_auto'"
+
+GOTO="md_inc_end"
+
+LABEL="md_auto_end"
+
+#
+# Incrementally build the md array
+#
 RUN+="/sbin/mdadm -I --no-degraded $env{DEVNAME}"
 
-RUN+="/bin/sh -c '>/tmp/.mdraid_start-%k; /bin/ln -s /sbin/mdraid_start /initqueue/mdraid_start.sh'"
+RUN+="/bin/ln -s /sbin/md_finished.sh /initqueue-finished/md_finished.sh"
 
 LABEL="md_inc_end"
+
+#
+# Handle non-container raid arrays
+#
+ACTION=="add|change", \
+	KERNEL=="md[0-9]*|md/*", \
+	ENV{MD_LEVEL}!="container", \
+	ENV{MD_CONTAINER}!="?*", \
+        ENV{rd_MDADMCONF}!="?*", \
+        ENV{rd_NO_MD}!="?*", \
+	GOTO="do_raidstart"
+
+GOTO="end_raidstart"
+
+LABEL="do_raidstart"
+
+# check if array is not inactive anymore
+TEST=="md/array_state", ATTR{md/array_state}!="|inactive", GOTO="end_raidstart"
+
+RUN+="/bin/sh -c 'ln -s /sbin/md_finished.sh /initqueue-finished/md_finished.sh;/sbin/initqueue --settled --onetime --unique /sbin/mdraid_start'"
+
+LABEL="end_raidstart"
+
+#
+# Handle container raid arrays
+#
+ACTION=="add|change", \
+	KERNEL=="md[0-9]*|md/*", \
+	ENV{DEVTYPE}!="partition", \
+	ENV{MD_LEVEL}=="container", \
+        ENV{rd_MDADMCONF}!="?*", \
+        ENV{rd_NO_MD}!="?*", \
+	GOTO="do_container"
+
+GOTO="end_container"
+
+LABEL="do_container"
+
+RUN+="/bin/sh -c 'ln -s /sbin/md_finished.sh /initqueue-finished/md_finished.sh;/sbin/initqueue --settled --onetime --unique --name mdcontainer_start-%k /sbin/mdcontainer_start $env{DEVNAME}'"
+
+LABEL="end_container"

modules.d/90mdraid/check

@@ -3,11 +3,21 @@
 # No mdadm?  No mdraid support.
 which mdadm >/dev/null 2>&1 || exit 1
 
-# We were asked to run in hostonly mode, so pass the check only if there
-# is an mdraid volume in use somewhere. This should really check to see if
-# root is on an mdraid volume only, but I am lazy.
-if [[ $1 = -h ]]; then
-    blkid | grep -q linux_raid || exit 1
-fi
+. $dracutfunctions
+[[ $debug ]] && set -x
+
+is_mdraid() { get_fs_type /dev/block/$1 |egrep -q '(linux|isw)_raid'; }
+
+[[ $1 = '-h' ]] && {
+    rootdev=$(find_root_block_device)
+    if [[ $rootdev ]]; then
+	# root lives on a block device, so we can be more precise about 
+	# hostonly checking
+	check_block_and_slaves is_mdraid "$rootdev" || exit 1
+    else
+	# root is not on a block device, use the shotgun approach
+	blkid | grep -q linux_raid || exit 1
+    fi
+}
 
 exit 0

modules.d/90mdraid/install

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-dracut_install mdadm partx
+dracut_install mdadm partx 
 
 
 # XXX: mdmon really needs to run as non-root?
@@ -11,9 +11,7 @@ dracut_install mdadm partx
 # inst /etc/passwd
 # inst /etc/group
 
-if [ -x /lib/udev/vol_id ]; then
-    inst_rules "$moddir/61-mdadm.rules"
-else
+if [ ! -x /lib/udev/vol_id ]; then
     inst_rules 64-md-raid.rules
 fi
 
@@ -23,15 +21,20 @@ if ! mdadm -Q -e imsm /dev/null &> /dev/null; then
     inst_hook pre-trigger 30 "$moddir/md-noimsm.sh"
 fi
 
-if [[ $hostonly ]]; then 
+if [[ $hostonly ]] || [[ $mdadmconf = "yes" ]]; then 
     [ -f /etc/mdadm/mdadm.conf ] && inst /etc/mdadm/mdadm.conf /etc/mdadm.conf
     [ -f /etc/mdadm.conf ] && inst /etc/mdadm.conf
 fi
 
 if [ -x  /sbin/mdmon ] ; then
     dracut_install mdmon
-    inst_hook pre-pivot 30 "$moddir/mdmon-pre-pivot.sh"
 fi 
+inst_hook pre-udev 30 "$moddir/mdmon-pre-udev.sh"
 
 inst "$moddir/mdraid_start.sh" /sbin/mdraid_start
+inst "$moddir/mdcontainer_start.sh" /sbin/mdcontainer_start
+inst "$moddir/mdadm_auto.sh" /sbin/mdadm_auto
+inst "$moddir/md_finished.sh" /sbin/md_finished.sh
 inst_hook pre-trigger 30 "$moddir/parse-md.sh"
+inst_hook pre-pivot 30 "$moddir/mdraid-cleanup.sh"
+inst_hook pre-pivot 31 "$moddir/mdraid-cleanup.sh"

modules.d/90mdraid/md-noimsm.sh

@@ -1,2 +1,2 @@
 info "rd_NO_MDIMSM: no MD RAID for imsm/isw raids"
-udevadm control --property=rd_NO_MDIMSM=1
+udevproperty rd_NO_MDIMSM=1

modules.d/90mdraid/md_finished.sh

@@ -0,0 +1,7 @@
+for f in /initqueue-settled/mdcontainer_start* /initqueue-settled/mdraid_start* /initqueue-settled/mdadm_auto*; do
+    [ -e $f ] && return 1
+done
+
+$UDEV_QUEUE_EMPTY >/dev/null 2>&1 || return 1
+
+return 0

modules.d/90mdraid/mdadm_auto.sh

@@ -0,0 +1,7 @@
+#!/bin/sh
+. /lib/dracut-lib.sh
+
+info "Autoassembling MD Raid"    
+udevadm control --stop-exec-queue
+/sbin/mdadm -As --auto=yes --run 2>&1 | vinfo
+udevadm control --start-exec-queue

modules.d/90mdraid/mdcontainer_start.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+. /lib/dracut-lib.sh
+
+md=$1
+udevadm control --stop-exec-queue
+# and activate any containers
+mdadm -IR $md 2>&1 | vinfo
+udevadm control --start-exec-queue

modules.d/90mdraid/mdmon-pre-pivot.sh

@@ -1,3 +0,0 @@
-# switch any mdmon instances to newroot
-[ -f /etc/mdadm.conf ] && /sbin/mdmon /proc/mdstat $NEWROOT
-

modules.d/90mdraid/mdmon-pre-udev.sh

@@ -0,0 +1,4 @@
+# save state dir for mdmon/mdadm for the real root
+mkdir /dev/.mdadm
+[ -e /var/run/mdadm ] && rm -fr /var/run/mdadm
+ln -s /dev/.mdadm /var/run/mdadm

modules.d/90mdraid/mdraid-cleanup.sh

@@ -0,0 +1,15 @@
+# stop everything which is not busy
+for i in /dev/md* /dev/md/*; do
+    [ -b $i ] || continue
+
+    mddetail=$(udevadm info --query=property --name=$i)
+    case "$mddetail" in 
+	*MD_LEVEL=container*) 
+	    ;;
+	*DEVTYPE=partition*)
+	    ;;
+	*)
+	    mdadm --stop $i >/dev/null 2>&1
+	    ;;
+    esac
+done

modules.d/90mdraid/mdraid_start.sh

@@ -1,18 +1,8 @@
 #!/bin/sh
 
-if $UDEV_QUEUE_EMPTY >/dev/null 2>&1; then
-    [ -h "$job" ] && rm -f "$job"
-    # run mdadm if udev has settled
-    info "Assembling MD RAID arrays"
-
-    # and activate any containers
-    for md in /dev/md?*; do
-        case $md in
-	    /dev/md*p*) ;;
-	    *)
-		info "Starting MD RAID array $md"
-                mdadm -R $md 2>&1 | vinfo
-                mdadm -IR $md 2>&1 | vinfo
-        esac
-    done
-fi
+. /lib/dracut-lib.sh
+# run mdadm if udev has settled
+info "Assembling MD RAID arrays"
+udevadm control --stop-exec-queue
+mdadm -IRs 2>&1 | vinfo
+udevadm control --start-exec-queue

modules.d/90mdraid/parse-md.sh

@@ -1,8 +1,6 @@
-initrdargs="$initrdargs rd_MD_UUID rd_NO_MD rd_NO_MDIMSM" 
-
 if getarg rd_NO_MD; then
     info "rd_NO_MD: removing MD RAID activation"
-    rm /etc/udev/rules.d/65-md-incremental*.rules
+    udevproperty rd_NO_MD=1
 else
     MD_UUID=$(getargs rd_MD_UUID=)
 
@@ -12,7 +10,7 @@ else
 	    [ -e "$f" ] || continue
 	    mv $f ${f}.bak 
 	    while read line; do 
-		if [ "${line/UUID CHECK//}" != "$line" ]; then
+		if [ "${line%%UUID CHECK}" != "$line" ]; then
 		    for uuid in $MD_UUID; do
 			printf 'ENV{MD_UUID}=="%s", GOTO="do_md_inc"\n' $uuid
 		    done;
@@ -26,7 +24,13 @@ else
     fi
 fi
 
+
+if [ -e /etc/mdadm.conf ] && ! getarg rd_NO_MDADMCONF; then
+    udevproperty rd_MDADMCONF=1
+    rm -f /pre-pivot/*mdraid-cleanup.sh
+fi
+
 if getarg rd_NO_MDIMSM; then
     info "rd_NO_MDIMSM: no MD RAID for imsm/isw raids"
-    udevadm control --property=rd_NO_MDIMSM=1
-fi
+    udevproperty rd_NO_MDIMSM=1
+fi

modules.d/95debug/install

@@ -1,3 +1,3 @@
 #!/bin/bash
 dracut_install -o ps grep more cat rm strace free showmount 
-dracut_install -o ping netstat rpcinfo
+dracut_install -o ping netstat rpcinfo vi scp

modules.d/95fcoe/check

@@ -0,0 +1,11 @@
+#!/bin/sh
+
+# We depend on network modules being loaded
+[ "$1" = "-d" ] && echo network
+
+# FIXME
+# If hostonly was requested, fail the check until we have some way of
+# knowing we are booting from FCoE
+[ "$1" = "-h" ] && exit 1
+
+exit 0

modules.d/95fcoe/fcoe-genrules.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+# We use (fcoe_interface or fcoe_mac) and fcoe_dcb as set by parse-fcoe.sh
+# If neither mac nor interface are set we don't continue
+[ -z "$fcoe_interface" -a -z "$fcoe_mac" ] && return
+
+# Write udev rules
+{
+    if [ -n "$fcoe_mac" ] ; then
+	printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/fcoe-up $env{INTERFACE} %s"\n' "$fcoe_mac" "$fcoe_dcb"
+    else
+	printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/fcoe-up $env{INTERFACE} %s"\n' "$fcoe_interface" "$fcoe_dcb"
+    fi
+} > /etc/udev/rules.d/60-fcoe.rules

modules.d/95fcoe/fcoe-up

@@ -0,0 +1,16 @@
+#!/bin/sh
+#
+# We get called like this:
+# /sbin/fcoe-up <network-device> <dcb|nodcb>
+#
+# Note currently only nodcb is supported, the dcb option is reserved for
+# future use.
+
+# Huh? Missing arguments ??
+[ -z "$1" -o -z "$2" ] && exit 1
+
+netif=$1
+dcb=$2
+
+/sbin/ip link set "$netif" up
+echo -n "$netif" > /sys/module/fcoe/parameters/create

modules.d/95fcoe/install

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+dracut_install ip
+
+inst "$moddir/fcoe-up" "/sbin/fcoe-up"
+inst_hook pre-udev 60 "$moddir/fcoe-genrules.sh"
+inst_hook cmdline 99 "$moddir/parse-fcoe.sh"

modules.d/95fcoe/installkernel

@@ -0,0 +1,2 @@
+#!/bin/bash
+instmods fcoe

modules.d/95fcoe/parse-fcoe.sh

@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# Supported formats:
+# fcoe=<networkdevice>:<dcb|nodcb>
+# fcoe=<macaddress>:<dcb|nodcb>
+#
+# Note currently only nodcb is supported, the dcb option is reserved for
+# future use.
+#
+# Note letters in the macaddress must be lowercase!
+#
+# Examples:
+# fcoe=eth0:nodcb
+# fcoe=4a:3f:4c:04:f8:d7:nodcb
+
+[ -z "$fcoe" ] && fcoe=$(getarg fcoe=)
+
+# If it's not set we don't continue
+[ -z "$fcoe" ] && return
+
+parse_fcoe_opts() {
+    local IFS=:
+    set $fcoe
+
+    case $# in
+        2)
+            fcoe_interface=$1
+            fcoe_dcb=$2
+            ;;
+        7)
+            fcoe_mac=$1:$2:$3:$4:$5:$6
+            fcoe_dcb=$7
+            ;;
+        *)
+            die "Invalid arguments for fcoe="
+            ;;
+    esac
+}
+
+parse_fcoe_opts
+
+# currently only nodcb is supported
+if [ "$fcoe_dcb" != "nodcb" ] ; then
+    die "Invalid FCoE DCB option: $fcoe_dcb"
+fi
+
+# FCoE actually supported?
+[ -e /sys/module/fcoe/parameters/create ] || modprobe fcoe || die "FCoE requested but kernel/initrd does not support FCoE"

modules.d/95iscsi/check

@@ -1,11 +1,35 @@
-#!/bin/sh
+#!/bin/bash
 # We depend on network modules being loaded
 [ "$1" = "-d" ] && echo network
 
-# If hostonly was requested, fail the check if we are not actually
-# booting from root.
-#[ "$1" = "-h" ] && ! egrep -q '/ /dev/nbd[0-9]*' /proc/mounts && exit 1
-
 # If our prerequisites are not met, fail anyways.
 which iscsistart hostname iscsi-iname >/dev/null 2>&1 || exit 1
+
+# If hostonly was requested, fail the check if we are not actually
+# booting from root.
+
+. $dracutfunctions
+
+[[ $debug ]] && set -x
+
+is_iscsi() ( 
+    [[ -L /sys/dev/block/$1 ]] || return
+    cd "$(readlink -f /sys/dev/block/$1)"
+    until [[ -d sys || -d iscsi_session ]]; do
+	cd ..
+    done
+    [[ -d iscsi_session ]]
+)
+
+case $1 in
+    -h) rootdev=$(find_root_block_device)
+	if [[ $rootdev ]]; then
+	    # root lives on a block device, so we can be more precise about 
+	    # hostonly checking
+	    check_block_and_slaves is_iscsi "$rootdev" || exit 1
+	else
+	    exit 1
+	fi ;;
+esac
+
 exit 0

modules.d/95iscsi/installkernel

@@ -1,2 +1,2 @@
 #!/bin/bash
-instmods iscsi_tcp crc32c
+instmods iscsi_tcp crc32c iscsi_ibft

modules.d/95iscsi/iscsiroot

@@ -28,20 +28,29 @@ fi
 
 # root is in the form root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
 netif="$1"
-root="$2"
+iroot="$2"
 
 source_all /etc/conf.d
 
 # If it's not iscsi we don't continue
-[ "${root%%:*}" = "iscsi" ] || exit 1
+[ "${iroot%%:*}" = "iscsi" ] || exit 1
+
+iroot=${iroot#iscsi:}
 
 # XXX modprobe crc32c should go in the cmdline parser, but I haven't yet
 # figured out a way how to check whether this is built-in or not
 modprobe crc32c
 
+
+[ -e /tmp/root.info ] && . /tmp/root.info
+
 if getarg iscsi_firmware ; then
-	iscsistart -b
-	exit 0
+    if [ -n "${root%%block:*}" ]; then
+        # if root is not specified try to mount the whole iSCSI LUN
+	printf 'ENV{DEVTYPE}!="partition", SYMLINK=="disk/by-path/*-iscsi-*-*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-iscsi-root.rules
+    fi
+    iscsistart -b
+    exit 0
 fi
 
 # override conf settings by command line options
@@ -64,15 +73,27 @@ arg=$(getarg iscsi_in_username)
 arg=$(getarg iscsi_in_password)
 [ -n "$arg" ] && iscsi_in_password=$arg
 
-if [ $root = ${root#iscsi:} ]; then
-	iroot=$(getarg iscsiroot)
-else
-	iroot=${root#iscsi:}
-fi
-
 # override conf/commandline options by dhcp root_path
 # FIXME this assumes that all values have been provided
 OLDIFS="$IFS"
+IFS=@
+set $iroot
+if [ $# -gt 1 ]; then
+    authinfo=$1; shift 
+    iroot=$*
+    # allow empty authinfo to allow having an @ in iscsi_target_name like this:
+    # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
+    if [ -n "$authinfo" ]; then
+        IFS=:
+        set $authinfo
+        iscsi_username=$1
+        iscsi_password=$2
+        if [ $# -gt 2 ]; then
+            iscsi_in_username=$3
+            iscsi_in_password=$4
+        fi
+    fi
+fi  
 IFS=:
 set $iroot
 iscsi_target_ip=$1; shift
@@ -124,6 +145,12 @@ if [ -n "${root%%block:*}" ]; then
     printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' $iscsi_lun >> /etc/udev/rules.d/99-iscsi-root.rules
 fi
 
+# inject new exit_if_exists
+echo 'settle_exit_if_exists="--exit-if-exists=/dev/root"; rm "$job"' > /initqueue/iscsi-settle.sh
+
+# force udevsettle to break
+> /initqueue/work
+
 iscsistart -i $iscsi_initiator -t $iscsi_target_name	\
     -g $iscsi_target_group -a $iscsi_target_ip	\
     -p $iscsi_target_port \

modules.d/95iscsi/parse-iscsiroot.sh

@@ -53,6 +53,7 @@ fi
 # iscsi_firmware does not need argument checking
 if [ -n "$iscsi_firmware" ] ; then
     netroot=${netroot:-iscsi}
+    modprobe iscsi_ibft
 fi
 
 # If it's not iscsi we don't continue
@@ -73,3 +74,6 @@ rootok=1
 
 # Shut up init error check
 [ -z "$root" ] && root="iscsi"
+
+echo '[ -e /dev/root ]' > /initqueue-finished/iscsi.sh
+

modules.d/95nbd/61-nbd-vol_id.rules

@@ -1,7 +0,0 @@
-SUBSYSTEM!="block", GOTO="nbd_end"
-ACTION!="change", GOTO="nbd_end"
-
-KERNEL=="nbd[0-9]*", IMPORT{program}="vol_id --export $tempnode"
-KERNEL=="nbd[0-9]*", IMPORT{program}="/sbin/blkid -o udev -p $tempnode"
-
-LABEL="nbd_end"

modules.d/95nbd/61-nbd.rules

@@ -1,6 +0,0 @@
-SUBSYSTEM!="block", GOTO="nbd_end"
-ACTION!="change", GOTO="nbd_end"
-
-KERNEL=="nbd[0-9]*", IMPORT{program}="/sbin/blkid -o udev -p $tempnode"
-
-LABEL="nbd_end"

modules.d/95nbd/check

@@ -1,11 +1,19 @@
-#!/bin/sh
+#!/bin/bash
 # We depend on network modules being loaded
 [ "$1" = "-d" ] && echo network
 
-# If hostonly was requested, fail the check if we are not actually
-# booting from root.
-[ "$1" = "-h" ] && ! egrep -q '/ /dev/nbd[0-9]*' /proc/mounts && exit 1
-
-# If our prerequisites are not met, fail anyways.
+# If our prerequisites are not met, fail.
 which nbd-client >/dev/null 2>&1 || exit 1
+
+# if an nbd device is not somewhere in the chain of devices root is mounted on,
+# fail the hostonly check.
+[ "$1" = "-h" ] && {
+    is_nbd() { [[ -b /dev/block/$1 && $1 == 43:* ]] ;}
+    . $dracutfunctions
+
+    rootdev=$(find_root_block_device)
+    [[ -b /dev/block/$rootdev ]] || exit 1
+    check_block_and_slaves is_nbd "$rootdev" || exit 1
+}
+
 exit 0

modules.d/95nbd/install

@@ -2,10 +2,4 @@
 inst nbd-client
 inst_hook cmdline 90 "$moddir/parse-nbdroot.sh"
 
-if [ -x /lib/udev/vol_id ]; then
-    inst_rules "$moddir/61-nbd-vol_id.rules"
-else
-    inst_rules "$moddir/61-nbd.rules"
-fi
-
 inst "$moddir/nbdroot" "/sbin/nbdroot"

modules.d/95nbd/nbdroot

@@ -95,7 +95,11 @@ nbd-client $preopts "$nbdserver" "$nbdport" /dev/nbd0 $opts || exit 1
 # If we didn't get a root= on the command line, then we need to
 # add the udev rules for mounting the nbd0 device
 if [ ! -e /etc/udev/rules.d/99-mount.rules ]; then
-    ln -s /dev/nbd0 /dev/root
+    echo 'settle_exit_if_exists="--exit-if-exists=/dev/nbd0"; [ -e /dev/nbd0 ] && { ln -s /dev/nbd0 /dev/root 2>/dev/null; rm "$job"; }' \
+       >> /initqueue/nbd.sh
+
+    echo '[ -e /dev/root ]' > /initqueue-finished/nbd.sh
+
     printf '/bin/mount -t %s -o %s %s %s\n' \
 	   "$nbdfstype" "$fsopts" /dev/nbd0 "$NEWROOT" \
 	> /mount/01-$$-nbd.sh
@@ -103,4 +107,6 @@ fi
 
 # NBD doesn't emit uevents when it gets connected, so kick it
 echo change > /sys/block/nbd0/uevent
+# force udevsettle to break
+> /initqueue/work
 exit 0

modules.d/95nbd/parse-nbdroot.sh

@@ -54,3 +54,6 @@ rootok=1
 
 # Shut up init error check
 [ -z "$root" ] && root="nbd"
+
+echo '[ -e /dev/nbd0 ]' > /initqueue-finished/nbd.sh
+

modules.d/95nfs/install

@@ -13,8 +13,19 @@ else
     LIBDIR="/lib"
 fi
 
-dracut_install $(ls {/usr,}$LIBDIR/libnfsidmap*.so* 2>/dev/null )
-dracut_install $(ls {/usr,}$LIBDIR/libnss*.so 2>/dev/null)
+dracut_install $(ls {/usr,}$LIBDIR/libnfsidmap_nsswitch.so* 2>/dev/null )
+#dracut_install $(ls {/usr,}$LIBDIR/libnfsidmap*.so* 2>/dev/null )
+
+nsslibs=$(for j in $(for i in \
+                         $(egrep -v '^#.*' /etc/nsswitch.conf|cut -f2 -d :\
+                          |fgrep -v NOTFOUND); do \
+                         echo "libnss_${i}.so";\
+                     done|sort -u); do \
+              echo -n "|$j";\
+          done)
+nsslibs=${nsslibs##|}
+
+dracut_install $(for i in $(ls {/usr,}$LIBDIR/libnss*.so 2>/dev/null); do echo $i;done | egrep "$nsslibs")
 
 inst_hook cmdline 90 "$moddir/parse-nfsroot.sh"
 inst_hook pre-pivot 70 "$moddir/nfsroot-cleanup.sh"

modules.d/95nfs/nfsroot

@@ -155,3 +155,10 @@ else
     mount -t nfs -o$options${options:+,}nolock $server:$path $NEWROOT \
 	&& { [ -e /dev/root ] || >/dev/root ; }
 fi
+
+# inject new exit_if_exists
+echo 'settle_exit_if_exists="--exit-if-exists=/dev/root"; rm "$job"' > /initqueue/nfs.sh
+# force udevsettle to break
+> /initqueue/work
+
+

modules.d/95nfs/parse-nfsroot.sh

@@ -132,3 +132,5 @@ rootok=1
 # Shut up init error check or make sure that block parser wont get 
 # confused by having /dev/nfs[4]
 root="$fstype"
+
+echo '[ -e $NEWROOT/proc ]' > /initqueue-finished/nfsroot.sh

modules.d/95resume/install

@@ -1,4 +1,4 @@
 #!/bin/bash
 inst_hook cmdline 10 "$moddir/parse-resume.sh"
 inst_hook pre-udev 30 "$moddir/resume-genrules.sh"
-inst_hook mount 90 "$moddir/resume.sh"
+inst_hook mount 10 "$moddir/resume.sh"

modules.d/95resume/resume-genrules.sh

@@ -1,15 +1,23 @@
 if [ -n "$resume" ]; then
     {
-    printf "KERNEL==\"%s\", RUN+=\"/bin/sh -c 'echo %%M:%%m > /sys/power/resume'\"\n" \
+    printf "KERNEL==\"%s\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\", RUN+=\"/bin/sh -c 'echo %%M:%%m > /sys/power/resume'\"\n" \
 		${resume#/dev/};
-    printf "SYMLINK==\"%s\", RUN+=\"/bin/sh -c 'echo %%M:%%m > /sys/power/resume'\"\n" \
+    printf "SYMLINK==\"%s\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\", RUN+=\"/bin/sh -c 'echo %%M:%%m > /sys/power/resume'\"\n" \
+		${resume#/dev/};
+    printf "KERNEL==\"%s\", ACTION==\"add|change\", SYMLINK+=\"/dev/resume\"\n" \
+		${resume#/dev/};
+    printf "SYMLINK==\"%s\", ACTION==\"add|change\", SYMLINK+=\"/dev/resume\"\n" \
 		${resume#/dev/};
     } >> /etc/udev/rules.d/99-resume.rules
+
+    printf '[ -e "%s" ] && { ln -s "%s" /dev/resume; rm "$job"; }\n' \
+        "$resume" "$resume" >> /initqueue-settled/resume.sh
+
+    echo '[ -e /dev/resume ]' > /initqueue-finished/resume.sh
+
 elif  ! getarg noresume; then
     {
-    echo "SUBSYSTEM==\"block\", ACTION==\"add\", ENV{ID_FS_TYPE}==\"suspend\"," \
-         " RUN+=\"/bin/sh -c 'echo %M:%m > /sys/power/resume'\"";
-    echo "SUBSYSTEM==\"block\", ACTION==\"add\", ENV{ID_FS_TYPE}==\"swsuspend\"," \
+    echo "SUBSYSTEM==\"block\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\"," \
          " RUN+=\"/bin/sh -c 'echo %M:%m > /sys/power/resume'\"";
     } >> /etc/udev/rules.d/99-resume.rules
 fi

modules.d/95rootfs-block/block-genrules.sh

@@ -5,8 +5,9 @@ if [ "${root%%:*}" = "block" ]; then
     printf 'SYMLINK=="%s", SYMLINK+="root"\n' \
 	${root#block:/dev/} 
     ) >> /etc/udev/rules.d/99-mount.rules
-    (
-    printf '[ -e "%s" ] && { ln -s "%s" /dev/root; rm "$job"; }\n' \
-	"${root#block:}" "${root#block:}"
-    ) >> /initqueue/blocksymlink.sh
+    
+    printf '[ -e "%s" ] && { ln -s "%s" /dev/root 2>/dev/null; rm "$job"; }\n' \
+	"${root#block:}" "${root#block:}" >> /initqueue-settled/blocksymlink.sh
+
+    echo '[ -e /dev/root ]' > /initqueue-finished/block.sh
 fi

modules.d/95rootfs-block/mount-root.sh

@@ -1,4 +1,5 @@
 #!/bin/sh
-if [ ! -s /.resume -a -n "$root" -a -z "${root%%block:*}" ]; then
+
+if [ -n "$root" -a -z "${root%%block:*}" ]; then
     mount -t ${fstype:-auto} -o "$rflags" "${root#block:}" "$NEWROOT" && ROOTFS_MOUNTED=yes
 fi

modules.d/95s390/parse-s390.sh

@@ -1,5 +1,3 @@
-initrdargs="$initrdargs dasd" 
-
 [ -d /etc/modprobe.d ] || mkdir /etc/modprobe.d
 
 dasd_arg=$(getarg dasd=)

modules.d/95terminfo/install

@@ -1,3 +1,8 @@
 #!/bin/bash
 # terminfo bits make things work better if you fall into interactive mode
-dracut_install $(find /lib/terminfo -type f)
+TERMINFODIR="/lib/terminfo"
+
+[ ! -d ${TERMINFODIR} -a -d "/etc/terminfo" ] && \
+	TERMINFODIR="/etc/terminfo"
+
+dracut_install $(find ${TERMINFODIR} -type f)

modules.d/95udev-rules/59-persistent-storage-volid.rules

@@ -0,0 +1,7 @@
+SUBSYSTEM!="block", GOTO="psv_end"
+ACTION!="add|change", GOTO="psv_end"
+ACTION=="change", KERNEL=="dm-[0-9]*", IMPORT{program}="vol_id --export $tempnode"
+KERNEL=="cciss[0-9]*", IMPORT{program}="vol_id --export $tempnode"
+KERNEL=="nbd[0-9]*", IMPORT{program}="vol_id --export $tempnode"
+KERNEL=="md[0-9]*|md_d[0-9]*|md/*", IMPORT{program}="vol_id --export $tempnode"
+LABEL="psv_end"