version 019

A bridge device with only one underlying ethernet device is almost
useless, for sure we want to support a bridge with multiple
underlying devices.

This patch adds the support by extending <ethname> in the original
bridge= cmdline to a comma-separated list of ethernet interfaces.

Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>

.gitignore

@@ -1,8 +1,13 @@
+/dracut.8
+/dracut-catimages.8
+/dracut.conf.5
+/dracut.conf.d/*.conf
+/dracut-gencmdline.8
+/dracut.html
+/dracut.kernel.7
+/modules.d/99base/switch_root
+/test/*/test.log
 test*.img
-modules.d/99base/switch_root
-*~
-dracut.kernel.7
-dracut.conf.5
-dracut.8
-dracut-catimages.8
-dracut-gencmdline.8
+/.buildpath
+/.project
+/dracut-version.sh

.mailmap

@@ -5,4 +5,8 @@ Victor Lowther <victor.lowther@gmail.com> <victor.lowther-Re5JQEeQqe8AvxtiuMwx3w
 Harald Hoyer <harald@redhat.com> <harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
 Harald Hoyer <harald@redhat.com> <harald@eeepc.(none)>
 Mike Snitzer <snitzer@redhat.com> <msnitzer@redhat.com> 
-
+Amerigo Wang <amwang@redhat.com> <xiyou.wangcong@gmail.com>
+Andrey Borzenkov <arvidjaar@gmail.com> <arvidjaar@mail.ru>
+Dan Horák <dhorak@redhat.com> <dan@danny.cz>
+John Reiser <jreiser@bitwagon.com> <jreiser@BitWagon.com>
+Luca Berra <bluca@vodka.it> <bluca@comedia.it>

AUTHORS

@@ -2,50 +2,66 @@ Harald Hoyer <harald@redhat.com>
 Victor Lowther <victor.lowther@gmail.com>
 Philippe Seewer <philippe.seewer@bfh.ch>
 Warren Togami <wtogami@redhat.com>
-Jeremy Katz <katzj@redhat.com>
 Amadeusz Żołnowski <aidecoe@aidecoe.name>
+Jeremy Katz <katzj@redhat.com>
 David Dillow <dave@thedillows.org>
+Will Woods <wwoods@redhat.com>
+Michal Soltys <soltys@ziu.info>
+Dave Young <dyoung@redhat.com>
+Amerigo Wang <amwang@redhat.com>
+Andrey Borzenkov <arvidjaar@gmail.com>
+Colin Guthrie <colin@mageia.org>
 Andreas Thienemann <andreas@bawue.net>
 Hans de Goede <hdegoede@redhat.com>
 Peter Jones <pjones@redhat.com>
-Luca Berra <bluca@comedia.it>
-Will Woods <wwoods@redhat.com>
-Andrey Borzenkov <arvidjaar@mail.ru>
-Andrey Borzenkov <arvidjaar@gmail.com>
-Marc Grimme <grimme@atix.de>
+John Reiser <jreiser@bitwagon.com>
+Luca Berra <bluca@vodka.it>
 Daniel Drake <dsd@laptop.org>
+Marc Grimme <grimme@atix.de>
+Dan Horák <dhorak@redhat.com>
+Roberto Sassu <roberto.sassu@polito.it>
+Anton Blanchard <anton@samba.org>
 Bill Nottingham <notting@redhat.com>
+Brian C. Lane <bcl@redhat.com>
 David Cantrell <dcantrell@redhat.com>
 Lance Albertson <lance@osuosl.org>
+Marian Ganisin <mganisin@redhat.com>
 Michael Ploujnikov <plouj@somanetworks.com>
 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
-Dan Horák <dan@danny.cz>
+Alan Pevec <apevec@redhat.com>
+Ian Dall <ian@beware.dropbear.id.au>
+James Buren <ryuo@frugalware.org>
 Joey Boggs <jboggs@redhat.com>
+Jon Ander Hernandez <jonan.h@gmail.com>
 Mike Snitzer <snitzer@redhat.com>
 Peter Rajnoha <prajnoha@redhat.com>
+Przemysław Rudy <prudy1@o2.pl>
 Vladislav Bogdanov <bubble@hoster-ok.com>
 Alexander Todorov <atodorov@redhat.com>
 Andy Lutomirski <luto@mit.edu>
+Anssi Hannula <anssi@mageia.org>
 Christian Heinz <christian.ch.heinz@gmail.com>
-Dan Horák <dhorak@redhat.com>
 Dave Jones <davej@redhat.com>
+Duane Griffin <duaneg@dghda.com>
 Frederic Crozat <fcrozat@mandriva.com>
 Glen Gray <slaine@slaine.org>
-Ian Dall <ian@beware.dropbear.id.au>
+Hermann Gausterer <git-dracut-2012@mrq1.org>
 James Laska <jlaska@redhat.com>
-Jon Ander Hernandez <jonan.h@gmail.com>
+Jan Stodola <jstodola@redhat.com>
 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Leho Kraav <leho@kraav.com>
 Lubomir Rintel <lkundrak@v3.sk>
-Luca Berra <bluca@vodka.it>
 Matt <smoothsailing72@hotmail.com>
 Matt Smith <shadowfax@gmx.com>
 Michal Schmidt <mschmidt@redhat.com>
-Michal Soltys <soltys@ziu.info>
 Munehiro Matsuda <haro@kgt.co.jp>
+Paolo Bonzini <pbonzini@redhat.com>
+Peter Robinson <pbrobinson@fedoraproject.org>
 Pádraig Brady <P@draigBrady.com>
 Quentin Armitage <quentin@armitage.org.uk>
 Sergey Fionov <fionov@gmail.com>
 Thilo Bangert <thilo.bangert@gmx.net>
+Thomas Lange <lange@informatik.uni-koeln.de>
 Tomasz Torcz <tomek@pipebreaker.pl>
 Vadim Kuznetsov <vadimk@gentoo.org>
 Ville Skyttä <ville.skytta@iki.fi>

HACKING

@@ -1,11 +1,11 @@
 Right now, most of the testing is done using a qemu/kvm guest and
 generating the initramfs on another box but the support is all present
 to build for the "running" machine.  For the former, you can boot the guest
-using qemu's -kernel and -initrd options.  
+using qemu's -kernel and -initrd options.
 
 dracut exists and will build an image.  It is command-line equivalent
 to most mkinitrd implementations and should be pretty straight-forward
-to use.  
+to use.
 
 To use, just run dracut with an output file name and, optionally, a
 kernel version (it defaults to using the current).   The appropriate
@@ -14,7 +14,7 @@ like to customize the list of modules copied in, edit /etc/dracut.conf
 and set
   dracutmodules="foo bar baz"
 
-Note that dracut calls functional components in modules.d "modules" 
+Note that dracut calls functional components in modules.d "modules"
 while kernel modules are called "drivers".
 
 Requirements:

Makefile

@@ -1,70 +1,84 @@
-VERSION=009
+VERSION=019
 GITVERSION=$(shell [ -d .git ] && git rev-list  --abbrev-commit  -n 1 HEAD  |cut -b 1-8)
 
 prefix ?= /usr
+libdir ?= ${prefix}/lib
 datadir ?= ${prefix}/share
-pkglibdir ?= ${datadir}/dracut
+pkglibdir ?= ${libdir}/dracut
 sysconfdir ?= ${prefix}/etc
-sbindir ?= ${prefix}/sbin
+bindir ?= ${prefix}/bin
 mandir ?= ${prefix}/share/man
 
-manpages = dracut.8 dracut.kernel.7 dracut.conf.5 dracut-catimages.8  dracut-gencmdline.8
+manpages = dracut.8 dracut.cmdline.7 dracut.conf.5 dracut-catimages.8
 
-.PHONY: install clean archive rpm testimage test all check AUTHORS
+.PHONY: install clean archive rpm testimage test all check AUTHORS doc
 
-ifeq (1,${WITH_SWITCH_ROOT})
-targets = modules.d/99base/switch_root
-else
-targets = 
-endif
+all: syncheck dracut-version.sh
 
-all: $(targets) $(manpages) dracut.html
+doc: $(manpages) dracut.html
 
 %: %.xml
 	xsltproc -o $@ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
 
-dracut.html: dracut.xml $(manpages)
+%.xml: %.asc
+	asciidoc -d manpage -b docbook -o $@ $<
+
+dracut.html: dracut.asc $(manpages)
+	asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc
 	xsltproc -o dracut.html --xinclude -nonet \
 		--stringparam draft.mode yes \
-		--stringparam html.stylesheet http://docs.redhat.com/docs/en-US/Common_Content/css/default.css \
+		--stringparam html.stylesheet \
+		http://docs.redhat.com/docs/en-US/Common_Content/css/default.css \
 		http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
+	rm dracut.xml
 
-modules.d/99base/switch_root: switch_root.c
-	gcc -D _GNU_SOURCE -D 'PACKAGE_STRING="dracut"' -std=gnu99 -fsigned-char -g -O2 -o modules.d/99base/switch_root switch_root.c	
-
-install:
+install: doc dracut-version.sh
 	mkdir -p $(DESTDIR)$(pkglibdir)
-	mkdir -p $(DESTDIR)$(sbindir)
+	mkdir -p $(DESTDIR)$(bindir)
 	mkdir -p $(DESTDIR)$(sysconfdir)
 	mkdir -p $(DESTDIR)$(pkglibdir)/modules.d
-	mkdir -p $(DESTDIR)$(mandir)/man{5,7,8}
-	install -m 0755 dracut $(DESTDIR)$(sbindir)/dracut
-	install -m 0755 dracut-gencmdline $(DESTDIR)$(sbindir)/dracut-gencmdline
-	install -m 0755 dracut-catimages $(DESTDIR)$(sbindir)/dracut-catimages
-	install -m 0755 mkinitrd-dracut.sh $(DESTDIR)$(sbindir)/mkinitrd
-	install -m 0755 lsinitrd $(DESTDIR)$(sbindir)/lsinitrd
-ifeq (1,${WITH_SWITCH_ROOT})
-	install -m 0755 modules.d/99base/switch_root $(DESTDIR)$(sbindir)/switch_root
-endif
+	mkdir -p $(DESTDIR)$(mandir)/man5 $(DESTDIR)$(mandir)/man7 $(DESTDIR)$(mandir)/man8
+	install -m 0755 dracut.sh $(DESTDIR)$(bindir)/dracut
+	install -m 0755 dracut-catimages.sh $(DESTDIR)$(bindir)/dracut-catimages
+	install -m 0755 mkinitrd-dracut.sh $(DESTDIR)$(bindir)/mkinitrd
+	install -m 0755 lsinitrd.sh $(DESTDIR)$(bindir)/lsinitrd
 	install -m 0644 dracut.conf $(DESTDIR)$(sysconfdir)/dracut.conf
 	mkdir -p $(DESTDIR)$(sysconfdir)/dracut.conf.d
-	install -m 0755 dracut-functions $(DESTDIR)$(pkglibdir)/dracut-functions
-	install -m 0755 dracut-logger $(DESTDIR)$(pkglibdir)/dracut-logger
+	install -m 0755 dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions.sh
+	install -m 0755 dracut-version.sh $(DESTDIR)$(pkglibdir)/dracut-version.sh
+	ln -s dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions
+	install -m 0755 dracut-logger.sh $(DESTDIR)$(pkglibdir)/dracut-logger.sh
+	install -m 0755 dracut-initramfs-restore.sh $(DESTDIR)$(pkglibdir)/dracut-initramfs-restore
 	cp -arx modules.d $(DESTDIR)$(pkglibdir)
-	install -m 0644 dracut.8 $(DESTDIR)$(mandir)/man8
-	install -m 0644 dracut-catimages.8 $(DESTDIR)$(mandir)/man8
-	install -m 0644 dracut-gencmdline.8 $(DESTDIR)$(mandir)/man8
-	install -m 0644 dracut.conf.5 $(DESTDIR)$(mandir)/man5
-	install -m 0644 dracut.kernel.7 $(DESTDIR)$(mandir)/man7
-ifeq (1,${WITH_SWITCH_ROOT})
-	rm $(DESTDIR)$(pkglibdir)/modules.d/99base/switch_root
-endif
+	install -m 0644 dracut.8 $(DESTDIR)$(mandir)/man8/dracut.8
+	install -m 0644 dracut-catimages.8 $(DESTDIR)$(mandir)/man8/dracut-catimages.8
+	install -m 0644 dracut.conf.5 $(DESTDIR)$(mandir)/man5/dracut.conf.5
+	install -m 0644 dracut.cmdline.7 $(DESTDIR)$(mandir)/man7/dracut.cmdline.7
+	ln -s dracut.cmdline.7 $(DESTDIR)$(mandir)/man7/dracut.kernel.7
+	if [ -n "$(systemdsystemunitdir)" ]; then \
+		mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
+		for i in \
+			modules.d/98systemd/dracut-initqueue.service \
+			modules.d/98systemd/dracut-pre-pivot.service \
+			modules.d/98systemd/dracut-pre-trigger.service \
+			modules.d/98systemd/dracut-pre-udev.service \
+			modules.d/98systemd/initrd-switch-root.service \
+			modules.d/98systemd/initrd-switch-root.target \
+			dracut-shutdown.service; do \
+				install -m 0644 $$i $(DESTDIR)$(systemdsystemunitdir); \
+		done; \
+		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants; \
+		ln -s ../dracut-shutdown.service \
+		$(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants/dracut-shutdown.service; \
+	fi
+
+dracut-version.sh:
+	@echo "DRACUT_VERSION=$(VERSION)-$(GITVERSION)" > dracut-version.sh
 
 clean:
 	$(RM) *~
 	$(RM) */*~
 	$(RM) */*/*~
-	$(RM) modules.d/99base/switch_root
 	$(RM) test-*.img
 	$(RM) dracut-*.rpm dracut-*.tar.bz2
 	$(RM) $(manpages) dracut.html
@@ -74,33 +88,33 @@ archive: dracut-$(VERSION)-$(GITVERSION).tar.bz2
 
 dist: dracut-$(VERSION).tar.bz2
 
-dracut-$(VERSION).tar.bz2:
-	git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ |bzip2 > dracut-$(VERSION).tar.bz2
+dracut-$(VERSION).tar.bz2: doc
+	git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ > dracut-$(VERSION).tar
+	mkdir -p dracut-$(VERSION)
+	cp $(manpages) dracut.html dracut-$(VERSION)
+	tar -rf dracut-$(VERSION).tar dracut-$(VERSION)/*.[0-9] dracut-$(VERSION)/dracut.html
+	rm -fr dracut-$(VERSION).tar.bz2 dracut-$(VERSION)
+	bzip2 -9 dracut-$(VERSION).tar
+	rm -f dracut-$(VERSION).tar
 
-dracut-$(VERSION)-$(GITVERSION).tar.bz2:
-	git archive --format=tar HEAD --prefix=dracut-$(VERSION)-$(GITVERSION)/ |bzip2 > dracut-$(VERSION)-$(GITVERSION).tar.bz2
-
-
-rpm: clean dracut-$(VERSION).tar.bz2
-	rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" --define "_rpmdir $$PWD" -ba dracut.spec 
-	rm -fr BUILD BUILDROOT
-
-gitrpm: dracut-$(VERSION)-$(GITVERSION).tar.bz2
-	echo "%define gittag $(GITVERSION)" > dracut.spec.git
-	cat dracut.spec >> dracut.spec.git
-	mv dracut.spec dracut.spec.bak
-	mv dracut.spec.git dracut.spec
-	rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" --define "_rpmdir $$PWD" --define "gittag $(GITVERSION)" -ba dracut.spec || :
-	mv dracut.spec.bak dracut.spec
-	rm -fr BUILD BUILDROOT
+rpm: dracut-$(VERSION).tar.bz2
+	rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
+	cp dracut-$(VERSION).tar.bz2 "$$rpmbuild"; \
+	LANG=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
+	(cd "$$rpmbuild"; rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
+	        --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
+		--define "_rpmdir $$PWD" -ba dracut.spec; ) && \
+	( mv "$$rpmbuild"/noarch/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr "$$rpmbuild"; ls *.rpm )
 
 syncheck:
-	@ret=0;for i in dracut-logger modules.d/99base/init modules.d/*/*.sh; do \
+	@ret=0;for i in dracut-initramfs-restore.sh dracut-logger.sh \
+                        modules.d/99base/init.sh modules.d/*/*.sh; do \
                 [ "$${i##*/}" = "module-setup.sh" ] && continue; \
-                [ "$${i##*/}" = "caps.sh" ] && continue; \
+                read line < "$$i"; [ "$${line#*bash*}" != "$$line" ] && continue; \
 		dash -n "$$i" ; ret=$$(($$ret+$$?)); \
 	done;exit $$ret
-	@ret=0;for i in dracut modules.d/02caps/caps.sh modules.d/*/module-setup.sh; do \
+	@ret=0;for i in *.sh mkinitrd-dracut.sh modules.d/*/*.sh \
+	                modules.d/*/module-setup.sh; do \
 		bash -n "$$i" ; ret=$$(($$ret+$$?)); \
 	done;exit $$ret
 
@@ -108,17 +122,17 @@ check: all syncheck
 	$(MAKE) -C test check
 
 testimage: all
-	./dracut -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	./dracut.sh -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img 
 
 testimages: all
-	./dracut -l -a debug --kernel-only -f test-kernel-$(shell uname -r).img $(shell uname -r)
+	./dracut.sh -l -a debug --kernel-only -f test-kernel-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img 
-	./dracut -l -a debug --no-kernel -f test-dracut.img $(shell uname -r)
+	./dracut.sh -l -a debug --no-kernel -f test-dracut.img $(shell uname -r)
 	@echo wrote  test-dracut.img 
 
 hostimage: all
-	./dracut -H -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	./dracut.sh -H -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img 
 
 AUTHORS:

NEWS

@@ -1,3 +1,179 @@
+dracut-019
+==========
+- initqueue/online hook
+- fixes for ifcfg write out
+- rootfs-block: avoid remount when options don't change
+- Debian multiarch support
+- virtfs root filesystem support
+- cope with systemd-udevd
+- mount tmpfs with strictatime
+- include all kernel/drivers/net/phy drivers
+- add debug_on() and debug_off() functions
+- add arguments for source_hook() and source_all()
+- cleanup hook
+- plymouth: get consoledev from /sys/class/tty/console/active
+- experimental systemd dracut module for systemd in the initramfs
+- install xhci-hcd kernel module
+- dracut: new "--mount" option
+- lsinitrd: new option --printsize
+- ARM storage kernel modules added
+- s390 cms conf file support
+- /etc/initrd-release in the initrd
+- vlan support
+- full bonding and bridge support
+- removed scsi_wait_scan kernel module from standard install
+- support rd.luks.allow-discards and honor options in crypttab
+- lots of bugfixes
+
+dracut-018
+==========
+- lvm: ignore lvm mirrors
+- lsinitrd: handle LZMA images
+- iscsi: add rd.iscsi.param
+- iscsi: add iscsi interface binding
+- new module cms to read and handle z-Series cms config files
+- fixed fstab.sys handling
+- new dracut option "--tmpdir"
+- new dracut option "--no-hostonly"
+- nbd: name based nbd connects
+- converted manpage and documentation source to asciidoc
+- write-ifcfg fixes and cleanups
+- ifup is now done in the initqueue
+- netroot cleanup
+- initqueue/online is now for hooks, which require network
+- no more /tmp/root.info
+- 98pollcdrom: factored out the ugly cdrom polling in the main loop
+- simplified rd.luks.uuid testing
+- removed "egrep" and "ls" calls
+- speedup kernel module installation
+- make bzip2 optional
+- lots of bugfixes
+
+dracut-017
+==========
+- a _lot_ faster than dracut-016 in image creation
+- systemd service dracut-shutdown.service
+- livenet fixes
+- ssh-client module install fix
+- root=iscsi:... fixed
+- lots of restructuring and optimizing in dracut-functions.sh
+- usrmount: honor fs_passno in /etc/fstab
+- renamed all shell scripts to .sh
+- new option "--omit-drivers" and config option "omit_drivers"
+- hostonly mode fixups
+
+dracut-016
+==========
+- fixed lsinitrd
+- honor binaries in sbin first
+- fixed usrmount module
+- added systemd service for shutdown
+- fixed terminfo on distros with /usr/share/terminfo
+- reload udev rules after "pre-trigger" hook
+- improved test suite
+- new parameter "--omit-drivers" and new conf param omit_drivers
+- "--offroot" support for mdraid
+- new libs: net-lib.sh, nfs-lib.sh, url-lib.sh, img-lib.sh
+  full of functions to use in your dracut module
+
+dracut-015
+==========
+- hostonly mode automatically adds command line options for root and /usr
+- --add-fstab --mount parameters
+- ssh-client module
+- --ctty option: add job control
+- cleanup /run/initramfs
+- convertfs module
+- /sbin/ifup can be called directly
+- support kernel modules compressed with xz
+- s390 iscsi modules added
+- terminfo module
+- lsinitrd can handle concatened images
+- lsinitrd can sort by size
+
+dracut-014
+==========
+- new dracut arguments:
+  --lvmconf
+  --nolvmconf
+  --fscks [LIST]
+  --nofscks
+- new .conf options:
+  install_items
+  fscks
+  nofscks
+- new kernel options:
+  rd.md.ddf
+  rd.md.waitclean
+  plymouth.enable
+- dracut move from /sbin to /usr/bin
+- dracut modules dir moved from /usr/share/dracut to /usr/lib/dracut
+- profiling with "dracut --profile"
+- new TEST-16-DMSQUASH, test for Fedora LiveCDs
+- speedup of initramfs creation
+- ask_for_password fallback to CLI
+- mdraid completely switched to incremental assembly
+- no more cdrom polling
+- "switch_root" breakpoint is now very late
+- /dev/live is gone
+- /dev/root is gone
+- fs-lib dracut module for fscks added
+- xen dracut module removed
+- usb mass storage kernel drivers now included
+- usrmount dracut module added:
+  mount /usr if found in /sysroot/etc/fstab
+- only include fsck helper needed for hostonly
+- fcoe: support for bnx2fc
+- support iSCSI drivers: qla4xxx, cxgb3i, cxgb4i, bnx2i, be2iscsi
+- fips-aesni dracut module added
+- add install_items to dracut.conf
+    install_items+=" <file>[ <file> ...] "
+- speedup internal testsuite
+- internal testsuite: store temporary data in a temporary dir
+
+dracut-013
+==========
+- speedup of initramfs creation
+- fixed inst_dir for symbolic links
+- add unix kernel module
+
+dracut-012
+==========
+- better fsck handling
+- fixed wait condition for LVM volumes
+- fix for hardlinks (welcome Debian! :-)
+- shutdown bugfixes
+- automatic busybox symlink creation
+- try to mount /usr, if init points to a path in /usr
+- btrfs with multiple devices
+- "--force-add" option for dracut, to force-add dracut modules,
+  without hostonly checks
+- lsinitrd also display the initramfs size in human readable form
+- livenet module, to mount live-isos over http
+- masterkey,ecryptfs,integrity security modules
+- initqueue/timeout queue e.g. for starting degraded raids
+- "make rpm" creates an rpm with an increasing release number from any
+  git checkout
+- support lvm mirrors
+- start degraded lvm mirrors after a timeout
+- start degraded md raids after a timeout
+- getarg() now returns wildcards without file matching to the current fs
+- lots of bugfixes
+
+dracut-011
+==========
+- use udev-168 features for shutting down udev
+- introduce "--prefix" to put all initramfs files in e.g "/run/initramfs"
+- new shutdown script (called by systemd >= 030) to disassemble the root device
+- lots of bugfixes
+- new module for gpg-encrypted keys - 91crypt-gpg
+
+dracut-010
+==========
+- lots of bugfixes
+- plymouth: use /run/plymouth/pid instead of /run/initramfs/plymouth
+- add "/lib/firmware/updates" to default firmware path
+
 dracut-009
 ==========
 - dracut generator
@@ -7,7 +183,7 @@ dracut-009
 
 - initramfs
   - hooks moved to /lib/dracut/hooks in initramfs
-  - rd.driver.{blacklist|pre|post} accept comma seperated driver list
+  - rd.driver.{blacklist|pre|post} accept comma separated driver list
   - iSCSI: iSCSI Boot Firmware Table (iBFT) support
   - support for /run
   - live image: support for generic rootfs.img (instead of ext3fs.img)
@@ -56,7 +232,7 @@ dracut-006
 - add btrfsctl scan for btrfs multi-devices (raid)
 - teach dmsquash live-root to use rootflags
 - trigger udev with action=add
-- fixed add_drivers handling 
+- fixed add_drivers handling
 - add sr_mod
 - use pigz instead of gzip, if available
 - boot from LVM mirrors and snapshots
@@ -69,7 +245,7 @@ dracut-006
 
 dracut-005
 ==========
-- dcb support to dracut's FCoE support 
+- dcb support to dracut's FCoE support
 - add readonly overlay support for dmsquash
 - add keyboard kernel modules
 - dracut.conf: added add_dracutmodules
@@ -107,7 +283,7 @@ dracut-003
 - add s390 network support
 - fixed dracut-gencmdline for root=UUID or LABEL
 - do not destroy assembled raid arrays if mdadm.conf present
-- mount /dev/shm 
+- mount /dev/shm
 - let udevd not resolve group and user names
 - moved network from udev to initqueue
 - improved debug output: specifying "rdinitdebug" now logs
@@ -115,7 +291,7 @@ dracut-003
 - strip kernel modules which have no x bit set
 - redirect stdin, stdout, stderr all RW to /dev/console
   so the user can use "less" to view /init.log and dmesg
-- add new device mapper udev rules and dmeventd 
+- add new device mapper udev rules and dmeventd
 - fixed dracut-gencmdline for root=UUID or LABEL
 - do not destroy assembled raid arrays if mdadm.conf present
 - mount /dev/shm
@@ -160,17 +336,17 @@ dracut-001
     Supported cmdline formats:
     fcoe=<networkdevice>:<dcb|nodcb>
     fcoe=<macaddress>:<dcb|nodcb>
-    
+
     Note currently only nodcb is supported, the dcb option is reserved for
     future use.
-    
+
     Note letters in the macaddress must be lowercase!
-    
+
     Examples:
     fcoe=eth0:nodcb
     fcoe=4A:3F:4C:04:F8:D7:nodcb
 
-- Syslog support for dracut   
+- Syslog support for dracut
     This module provides syslog functionality in the initrd.
     This is especially interesting when complex configuration being
     used to provide access to the device the rootfs resides on.
@@ -197,20 +373,20 @@ dracut-0.8
 dracut-0.7
 ==========
 - dracut:     strip binaries in initramfs
-    
+
            --strip
                   strip binaries in the initramfs (default)
-    
+
            --nostrip
                   do not strip binaries in the initramfs
 - dracut-catimages
-    
+
     Usage: ./dracut-catimages [OPTION]... <initramfs> <base image>
     [<image>...]
     Creates initial ramdisk image by concatenating several images from the
     command
     line and /boot/dracut/
-    
+
       -f, --force           Overwrite existing initramfs file.
       -i, --imagedir        Directory with additional images to add
                             (default: /boot/dracut/)
@@ -227,44 +403,44 @@ dracut-0.7
 dracut-0.6
 ==========
 - dracut: add --kernel-only and --no-kernel arguments
-    
+
            --kernel-only
                   only install kernel drivers and firmware files
-    
+
            --no-kernel
                   do not install kernel drivers and firmware files
-    
+
     All kernel module related install commands moved from "install"
     to "installkernel".
-    
+
     For "--kernel-only" all installkernel scripts of the specified
     modules are used, regardless of any checks, so that all modules
     which might be needed by any dracut generic image are in.
-    
+
     The basic idea is to create two images. One image with the kernel
     modules and one without. So if the kernel changes, you only have
     to replace one image.
-    
+
     Grub and the kernel can handle multiple images, so grub entry can
     look like this:
-    
+
     title Fedora (2.6.29.5-191.fc11.i586)
             root (hd0,0)
             kernel /vmlinuz-2.6.29.5-191.fc11.i586 ro rhgb quiet
             initrd /initrd-20090722.img /initrd-kernel-2.6.29.5-191.fc11.i586.img /initrd-config.img
-    
+
     initrd-20090722.img
       the image provided by the initrd rpm
       one old backup version is kept like with the kernel
-    
+
     initrd-kernel-2.6.29.5-191.fc11.i586.img
       the image provided by the kernel rpm
-    
+
     initrd-config.img
       optional image with local configuration files
 
 - dracut: add --kmoddir directory, where to look for kernel modules
-    
+
            -k, --kmoddir [DIR]
                   specify the directory, where to look for kernel modules
 
@@ -284,18 +460,18 @@ dracut-0.4
 - firmware loading support
 - new internal queue (initqueue)
     initqueue now loops until /dev/root exists or root is mounted
-    
+
     init now has the following points to inject scripts:
-    
+
     /cmdline/*.sh
        scripts for command line parsing
-    
+
     /pre-udev/*.sh
        scripts to run before udev is started
-    
+
     /pre-trigger/*.sh
        scripts to run before the main udev trigger is pulled
-    
+
     /initqueue/*.sh
        runs in parallel to the udev trigger
        Udev events can add scripts here with /sbin/initqueue.
@@ -307,12 +483,12 @@ dracut-0.4
        filesystem was mounted, the user will be dropped to a shell after
        a timeout.
        Scripts can remove themselves from the initqueue by "rm $job".
-    
+
     /pre-mount/*.sh
        scripts to run before the root filesystem is mounted
        NFS is an exception, because it has no device node to be created
        and mounts in the udev events
-    
+
     /mount/*.sh
        scripts to mount the root filesystem
        NFS is an exception, because it has no device node to be created
@@ -320,12 +496,12 @@ dracut-0.4
        If the udev queue is empty and no root device is found or no root
        filesystem was mounted, the user will be dropped to a shell after
        a timeout.
-    
+
     /pre-pivot/*.sh
        scripts to run before the real init is executed and the initramfs
        disappears
        All processes started before should be killed here.
-    
+
     The behaviour of the dmraid module demonstrates how to use the new
     mechanism. If it detects a device which is part of a raidmember from a
     udev rule, it installs a job to scan for dmraid devices, if the udev

PKGBUILD

@@ -3,7 +3,7 @@ pkgver=$(date +%s)
 pkgrel=$(git log --pretty=format:%h |head -n 1)
 pkgdesc="Initramfs generation utility"
 arch=('i686' 'x86_64')
-url="http://sourceforge.net/apps/trac/dracut/"
+url="https://dracut.wiki.kernel.org/"
 license=('GPL')
 conflicts=('dracut' 'mkinitcpio')
 provides=('dracut=9999' 'mkinitcpio=9999')
@@ -18,4 +18,4 @@ build() {
   cd ..
   make sysconfdir=/etc || return 1
   make DESTDIR="${pkgdir}" sysconfdir=/etc install || return 1
-}
+}

README

@@ -2,8 +2,8 @@ Dracut
 ------
 Dracut is a new initramfs infrastructure.
 
-Information about the initial goals and aims can be found at 
-https://fedoraproject.org/wiki/Initrdrewrite 
+Information about the initial goals and aims can be found at
+https://fedoraproject.org/wiki/Initrdrewrite
 
 Unlike existing initramfs's, this is an attempt at having as little as
 possible hard-coded into the initramfs as possible.  The initramfs has
@@ -19,19 +19,19 @@ we'll grow some hooks for running arbitrary commands in the flow of
 the script, but it's worth trying to resist the urge as much as we can
 as hooks are guaranteed to be the path to slow-down.
 
-Most of the initrd generation functionality in dracut is provided by a bunch
+Most of the initramfs generation functionality in dracut is provided by a bunch
 of generator modules that are sourced by the main dracut script to install
-specific functionality into the initrd.  They live in the modules.d 
-subdirectory, and use functionality provided by dracut-functions to do their 
+specific functionality into the initramfs.  They live in the modules.d
+subdirectory, and use functionality provided by dracut-functions to do their
 work.
 
 Some general rules for writing modules:
  * Use one of the inst family of functions to actually install files
-   on to the initrd.  They handle mangling the pathnames and (for binaries,
+   on to the initramfs.  They handle mangling the pathnames and (for binaries,
    scripts, and kernel modules) installing dependencies as appropriate so
    you do not have to.
- * Scripts that end up on the initrd should be POSIX compliant. dracut
-   will try to use /bin/dash as /bin/sh for the initrd if it is available,
+ * Scripts that end up on the initramfs should be POSIX compliant. dracut
+   will try to use /bin/dash as /bin/sh for the initramfs if it is available,
    so you should install it on your system -- dash aims for strict POSIX
    compliance to the extent possible.
  * Hooks MUST be POSIX compliant -- they are sourced by the init script,
@@ -44,35 +44,49 @@ Some general rules for writing modules:
  * We have some breakpoints for debugging your hooks.  If you pass 'rdbreak'
    as a kernel parameter, the initramfs will drop to a shell just before
    switching to a new root. You can pass 'rdbreak=hookpoint', and the initramfs
-   will break just before hooks in that hookpoint run. 
+   will break just before hooks in that hookpoint run.
 
 Also, there is an attempt to keep things as distribution-agnostic as
 possible.  Every distribution has their own tool here and it's not
 something which is really interesting to have separate across them.
 So contributions to help decrease the distro-dependencies are welcome.
 
-Currently dracut lives on sourceforge.
+Currently dracut lives on kernel.org.
+
+The tarballs can be found here:
+	http://www.kernel.org/pub/linux/utils/boot/dracut/
+	ftp://ftp.kernel.org/pub/linux/utils/boot/dracut/
+
+Git:
+	git://git.kernel.org/pub/scm/boot/dracut/dracut.git
+	http://git.kernel.org/pub/scm/boot/dracut/dracut.git
+	https://git.kernel.org/pub/scm/boot/dracut/dracut.git
+
+	git://github.com/haraldh/dracut.git
+
+	git://dracut.git.sourceforge.net/gitroot/dracut/dracut
+
+Git Web:
+	http://git.kernel.org/?p=boot/dracut/dracut.git
+
+	https://haraldh@github.com/haraldh/dracut.git
+
+	http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut
+
+Git Web RSS Feed:
+	http://git.kernel.org/?p=boot/dracut/dracut.git;a=rss
 
 Project Page:
-https://sourceforge.net/projects/dracut/
+	http://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html
 
-Drop Harald Hoyer <harald@redhat.com> a mail, if you want to help with 
-the documentation, git access, etc.
+Project Wiki:
+	http://dracut.wiki.kernel.org
 
-Git Repository:
-http://dracut.git.sourceforge.net/
-git://dracut.git.sourceforge.net/gitroot/dracut/dracut
-
-Trac Instance:
-http://apps.sourceforge.net/trac/dracut/ 
-
-The git tree can be found at
-git://dracut.git.sourceforge.net/gitroot/dracut/dracut for now.  See the TODO
-file for things which still need to be done and HACKING for some
-instructions on how to get started.  There is also a mailing list that
-is being used for the discussion -- initramfs@vger.kernel.org.  It is
-a typical vger list, send mail to majordomo@vger.kernel.org with body
-of 'subscribe initramfs email@host.com' 
+See the TODO file for things which still need to be done and HACKING for
+some instructions on how to get started.  There is also a mailing list
+that is being used for the discussion -- initramfs@vger.kernel.org.
+It is a typical vger list, send mail to majordomo@vger.kernel.org with body
+of 'subscribe initramfs email@host.com'
 
 
 Licensed under the GPLv2

README.generic

@@ -1,7 +1,7 @@
 To build a generic initramfs, you have to install the following software packages:
  * device-mapper
  * cryptsetup-luks
- * rpcbind nfs-utils 
+ * rpcbind nfs-utils
  * lvm2
  * iscsi-initiator-utils
  * nbd

README.modules

@@ -4,7 +4,7 @@ structure:
 
 dracut_install_dir/modules.d/
 	00modname/
-		install
+		module-setup.sh
 		check
 		<other files as needed by the hook>
 
@@ -12,45 +12,55 @@ dracut_install_dir/modules.d/
 	   The numeric code must be present and in the range of 00 - 99.
 	   Modules with lower numbers are installed first.  This is important
 	   because the dracut install functions (which install files onto
-	   the initrd) refuse to overwrite already installed files. This makes 
-	   it easy for an earlier module to override the functionality of a 
+	   the initrd) refuse to overwrite already installed files. This makes
+	   it easy for an earlier module to override the functionality of a
 	   later module, so that you can have a distro or system specific
 	   module override or modify the functionality of a generic module
 	   without having to patch the more generic module.
 
-install: dracut sources this script to install the functionality that a 
+module-setup.sh:
+	 dracut sources this script to install the functionality that a
 	 module implements onto the initrd.  For the most part, this amounts
 	 to copying files from the host system onto the initrd in a controlled
-	 manner.  dracut supplies several install functions that are
+	 manner.
+
+install():
+	 This function of module-setup.sh is called to install all
+	 non-kernel files. dracut supplies several install functions that are
 	 specialized for different file types.  Browse through dracut-functions
 	 fore more details.  dracut also provides a $moddir variable if you
 	 need to install a file from the module directory, such as an initrd
 	 hook, a udev rule, or a specialized executable.
 
-check: Dracut calls this program to check and see if a module can be installed
+installkernel():
+	 This function of module-setup.sh is called to install all
+	 kernel related files.
+
+
+check():
+       Dracut calls this function to check and see if a module can be installed
        on the initrd.
-       
+
        When called without options, check should check to make sure that
        any files it needs to install into the initrd from the host system
        are present.  It should exit with a 0 if they are, and a 1 if they are
        not.
 
-       When called with -h, it should perform the same check that it would
-       without any options, and it should also check to see if the 
+       When called with $hostonly set, it should perform the same check
+       that it would without it set, and it should also check to see if the
        functionality the module implements is being used on the host system.
        For example, if this module handles installing support for LUKS
        encrypted volumes, it should return 0 if all the tools to handle
        encrpted volumes are available and the host system has the root
        partition on an encrypted volume, 1 otherwise.
 
-       When called with -d, it should output a list of dracut modules
+depends():
+       This function should output a list of dracut modules
        that it relies upon.  An example would be the nfs and iscsi modules,
        which rely on the network module to detect and configure network
        interfaces.
 
-       Check may take additional options in the future.  
-
-Any other files in the module will not be touched by dracut directly. 
+Any other files in the module will not be touched by dracut directly.
 
 You are encouraged to provide a README that describes what the module is for.
 
@@ -60,39 +70,42 @@ HOOKS
 
 init has the following hook points to inject scripts:
 
-/cmdline/*.sh
+/lib/dracut/hooks/cmdline/*.sh
    scripts for command line parsing
 
-/pre-udev/*.sh
+/lib/dracut/hooks/pre-udev/*.sh
    scripts to run before udev is started
 
-/pre-trigger/*.sh
+/lib/dracut/hooks/pre-trigger/*.sh
    scripts to run before the main udev trigger is pulled
 
-/initqueue/*.sh
+/lib/dracut/hooks/initqueue/*.sh
    runs in parallel to the udev trigger
    Udev events can add scripts here with /sbin/initqueue.
    If /sbin/initqueue is called with the "--onetime" option, the script
    will be removed after it was run.
-   If /initqueue/work is created and udev >= 143 then this loop can
-   process the jobs in parallel to the udevtrigger.
+   If /lib/dracut/hooks/initqueue/work is created and udev >= 143 then
+   this loop can process the jobs in parallel to the udevtrigger.
    If the udev queue is empty and no root device is found or no root
    filesystem was mounted, the user will be dropped to a shell after
    a timeout.
    Scripts can remove themselves from the initqueue by "rm $job".
 
-/pre-mount/*.sh
+/lib/dracut/hooks/pre-mount/*.sh
    scripts to run before the root filesystem is mounted
-   Network filesystems like NFS that do not use device files are an 
+   Network filesystems like NFS that do not use device files are an
    exception. Root can be mounted already at this point.
 
-/mount/*.sh
+/lib/dracut/hooks/mount/*.sh
    scripts to mount the root filesystem
    If the udev queue is empty and no root device is found or no root
    filesystem was mounted, the user will be dropped to a shell after
    a timeout.
 
-/pre-pivot/*.sh
+/lib/dracut/hooks/pre-pivot/*.sh
+   scripts to run before latter initramfs cleanups
+
+/lib/dracut/hooks/cleanup/*.sh
    scripts to run before the real init is executed and the initramfs
    disappears
    All processes started before should be killed here.

README.testsuite

@@ -0,0 +1,11 @@
+For the testsuite to work, you will have to install at least the following software packages:
+dash
+asciidoc
+mdadm
+lvm2
+cryptsetup
+nfs-utils
+netbsd-iscsi
+nbd
+dhcp
+iscsi-initiator-utils

TODO

@@ -1,2 +1,36 @@
-See https://sourceforge.net/apps/trac/dracut/wiki/TODO
+Current TODO list, broken into things which are relevant for the
+initramfs itself (/init et al) vs the generator.
+A lot of things are/should be marked with "FIXME" in the code.
+
+Items are ordered in priority.
+
+INITRAMFS TODO
+
+- fix btrfs subvolume mounting for /usr (fsck)
+- generate systemd unit dracut-initramfs-restore in /run/systemd dynamically
+- put "root=" parsing hooks in separate hook dir
+- call "root=" parsing hooks after getting new rootpath from dhcp
+- put mount hook in main initqueue loop
+- the hard-coded list of udev rules that we care about is kind of lame.
+- automatic kexec fallback
+- panic fallback
+
+GENERATOR TODO
+
+- remove /proc/modules use /sys/module
+- add mechanism for module specific command line options
+- pkg-config integration, to make it easy for other packages to use us.
+- add recovery image creator (mkrecovery)
+- default module specification could use some work
+- udev rule copying, as mentioned above, is a bit too hard-coded
+
+CODE TODO
+
+- document more functions
+- make function vars local, and prefix with "_"
+
+Future Enhancement Requests
+
+- run ssh server to enter crypto password or perform debugging (supported by debian)
+- https://bugzilla.redhat.com/show_bug.cgi?id=524727 - Dracut + encrypted root + networking
 

debian/changelog

@@ -1,53 +0,0 @@
-dracut (2.26) unstable; urgency=low
-
-  [ Harald Hoyer ]
-  * multipath: install udev rules and helper tools
-  * NEWS update
-  * multipath: install xdr utils
-  * multipath: install multipath kernel module
-  * specfile update
-  * dracut.8: fixed formatting for rootfs and mount options
-  * dracut: check more return codes, check for permissions and use
-    derror
-  * dracut: create initramfs-$(kernelversion).img by default
-  * Makefile: add WITH_SWITCH_ROOT
-  * fips: search different lib paths
-  * kernel-modules: add firewire-ohci to hardcoded modules list
-  * 90dm: install more device mapper kernel modules
-  * specfile update
-
-  [ Peter Jones ]
-  * Use glob for libdir when installing multipath libraries.
-  * Add #!/bin/bash for consistency.
-  * Make sure and get all the multipath related modules.
-  * Bring up multipath devices that are configured in multipath.conf.
-  * Fix missing shell variables.
-  * This has to be executable.
-  * Handle modules with hyphens in their names properly.
-
-  [ Harald Hoyer ]
-  * lvm: scan without monitor
-
-  [ Yanko Kaneti ]
-  * Wildcards need dracut_install
-
-  [ Harald Hoyer ]
-  * lvm/dmraid: make LIBDIR depend on the binary
-  * nfs: install passwd entries for nobody and nfsnobody
-  * nfs: add rd_NFS_DOMAIN parameter to set the NFSv4 domain name
-  * dracut-functions: inst_simple(): do not bail out if target is a dir
-    and exists
-  * dm: install dmsetup
-  * multipath: corrected initqueue parameter
-  * rootfs-block/mount-root: remount root with /etc/fstab filesystem
-    options
-  * test: set PATH
-
- -- Philippe Seewer <philippe.seewer@.bfh.ch>  Fri, 27 Nov 2009 10:58:26 +0100
-
-dracut (2.21) unstable; urgency=low
-  [ Harald Hoyer ]
-  * fix rd_DASD argument handling (bug #531720)
-  * Resolves: rhbz#531720
-
- -- Philippe Seewer <philippe.seewer@.bfh.ch>  Fri, 06 Nov 2009 15:52:00 +0100

debian/compat

@@ -1 +0,0 @@
-5

debian/control

@@ -1,41 +0,0 @@
-Source: dracut
-Section: utils
-Priority: optional
-Maintainer: Philippe Seewer <philippe.seewer@bfh.ch>
-Build-Depends: debhelper (>= 5.0), cdbs
-Standards-Version: 3.8.4
-Vcs-Browser: http://dracut.git.sourceforge.net/git/gitweb-index.cgi
-Vcs-Git: git://dracut.git.sourceforge.net/gitroot/dracut/dracut
-
-Package: dracut
-Architecture: all
-Recommends: cryptsetup, dmsetup, dmraid, lvm2, mdadm
-Suggests: dracut-network
-Depends: cpio, module-init-tools, udev, ${misc:Depends}
-Provides: linux-initramfs-tool
-Description: A new initramfs infrastructure
- Unlike existing initramfs's, this is an attempt at having as little as
- possible hard-coded into the initramfs as possible.  The initramfs has
- (basically) one purpose in life -- getting the rootfs mounted so that
- we can transition to the real rootfs.  This is all driven off of
- device availability.  Therefore, instead of scripts hard-coded to do
- various things, we depend on udev to create device nodes for us and
- then when we have the rootfs's device node, we mount and carry on. 
- Having the root on MD, LVM2, LUKS is supported as well as NFS, iSCSI,
- NBD and FCOE with dracut-network.
-
-Package: dracut-network
-Architecture: all
-Recommends: nfs-common, open-iscsi, nbd-client
-Depends: dracut, iputils-arping, dhcp3-client, ${misc:Depends}
-Description: A new initramfs infrastucture
- Unlike existing initramfs's, this is an attempt at having as little as
- possible hard-coded into the initramfs as possible.  The initramfs has
- (basically) one purpose in life -- getting the rootfs mounted so that
- we can transition to the real rootfs.  This is all driven off of
- device availability.  Therefore, instead of scripts hard-coded to do
- various things, we depend on udev to create device nodes for us and
- then when we have the rootfs's device node, we mount and carry on. 
- Having the root on MD, LVM2, LUKS is supported as well as NFS, iSCSI,
- NBD and FCOE with dracut-network.
-

debian/copyright

@@ -1,39 +0,0 @@
-This package was debianized by Philippe Seewer <philippe.seewer@bfh.ch> on
-Fri Nov 20 15:45:00 +0100
-
-Sources can be downloaded from:
-
-    https://sourceforge.net/projects/dracut/
-
-Upstream Maintainer:
-    Harald Hoyer <harald@redhat.com>
-
-Updstream Authors:
-    Victor Lowther <victor.lowther@gmail.com>
-    Warren Togami <wtogami@redhat.com>
-    Jeremy Katz <katzj@redhat.com>
-    Philippe Seewer <philippe.seewer@bfh.ch>
-    David Dillow <dave@thedillows.org>
-    Andreas Thienemann <andreas@bawue.net>
-    Hans de Goede <hdegoede@redhat.com>
-    Marc Grimme <grimme@atix.de>
-    Bill Nottingham <notting@redhat.com>
-    Daniel Drake <dsd@laptop.org>
-    Lance Albertson <lance@osuosl.org>
-    Michael Ploujnikov <plouj@somanetworks.com>
-    Peter Jones <pjones@redhat.com>
-    Dave Jones <davej@redhat.com>
-    Michal Schmidt <mschmidt@redhat.com>
-    Peter Rajnoha <prajnoha@redhat.com>
-    Quentin Armitage <quentin@armitage.org.uk>
-    Sergey Fionov <fionov@gmail.com>
-    Thilo Bangert <thilo.bangert@gmx.net>
-
-Copyright:
-    Copyright 2009 Harald Hoyer <harald@redhat.com>
-
-
-License: GPLv2
-
-On Debian systems, the complete text of the GNU General Public 
-License version 2 can be found in `/usr/share/common-licenses/GPL-2'.

debian/dracut-network.dirs

@@ -1,5 +0,0 @@
-usr/share/dracut/modules.d/40network
-usr/share/dracut/modules.d/95fcoe
-usr/share/dracut/modules.d/95iscsi
-usr/share/dracut/modules.d/95nbd
-usr/share/dracut/modules.d/95nfs

debian/dracut-network.install

@@ -1,5 +0,0 @@
-modules.d/40network	usr/share/dracut/modules.d
-modules.d/95fcoe	usr/share/dracut/modules.d
-modules.d/95iscsi	usr/share/dracut/modules.d
-modules.d/95nbd		usr/share/dracut/modules.d
-modules.d/95nfs		usr/share/dracut/modules.d

debian/dracut.dirs

@@ -1,25 +0,0 @@
-usr/share/dracut
-usr/share/dracut/modules.d/00dash
-usr/share/dracut/modules.d/01fips
-usr/share/dracut/modules.d/60xen
-usr/share/dracut/modules.d/90crypt
-usr/share/dracut/modules.d/90dm
-usr/share/dracut/modules.d/90dmraid
-usr/share/dracut/modules.d/90kernel-modules
-usr/share/dracut/modules.d/90lvm
-usr/share/dracut/modules.d/90mdraid
-usr/share/dracut/modules.d/90multipath
-usr/share/dracut/modules.d/95dasd
-usr/share/dracut/modules.d/95dasd_mod
-usr/share/dracut/modules.d/95debug
-usr/share/dracut/modules.d/95resume
-usr/share/dracut/modules.d/95rootfs-block
-usr/share/dracut/modules.d/95terminfo
-usr/share/dracut/modules.d/95udev-rules
-usr/share/dracut/modules.d/95uswsusp
-usr/share/dracut/modules.d/95zfcp
-usr/share/dracut/modules.d/95znet
-usr/share/dracut/modules.d/98syslog
-usr/share/dracut/modules.d/99base
-/var/lib/dracut
-/etc/dracut.conf.d

debian/dracut.docs

@@ -1,4 +0,0 @@
-HACKING
-README.generic
-README.kernel
-README.modules

debian/dracut.install

@@ -1,28 +0,0 @@
-dracut			usr/sbin
-dracut-catimages	usr/sbin
-dracut-update-initramfs	usr/sbin
-dracut-gencmdline	usr/sbin
-dracut-functions	usr/share/dracut
-dracut.conf		etc
-modules.d/00dash		usr/share/dracut/modules.d
-modules.d/01fips		usr/share/dracut/modules.d
-modules.d/60xen			usr/share/dracut/modules.d
-modules.d/90crypt		usr/share/dracut/modules.d
-modules.d/90dm			usr/share/dracut/modules.d
-modules.d/90dmraid		usr/share/dracut/modules.d
-modules.d/90kernel-modules	usr/share/dracut/modules.d
-modules.d/90lvm			usr/share/dracut/modules.d
-modules.d/90mdraid		usr/share/dracut/modules.d
-modules.d/90multipath		usr/share/dracut/modules.d
-modules.d/95dasd		usr/share/dracut/modules.d
-modules.d/95dasd_mod		usr/share/dracut/modules.d
-modules.d/95debug		usr/share/dracut/modules.d
-modules.d/95resume		usr/share/dracut/modules.d
-modules.d/95rootfs-block	usr/share/dracut/modules.d
-modules.d/95terminfo		usr/share/dracut/modules.d
-modules.d/95udev-rules		usr/share/dracut/modules.d
-modules.d/95uswsusp		usr/share/dracut/modules.d
-modules.d/95zfcp		usr/share/dracut/modules.d
-modules.d/95znet		usr/share/dracut/modules.d
-modules.d/98syslog		usr/share/dracut/modules.d
-modules.d/99base		usr/share/dracut/modules.d

debian/dracut.manpages

@@ -1,4 +0,0 @@
-dracut.8
-dracut.conf.5
-dracut-catimages.8
-dracut-gencmdline.8

debian/dracut.postinst

@@ -1,8 +0,0 @@
-#!/bin/sh
-
-set -e
-
-# Regenerate initramfs when we're `installed`
-DPKG_MAINTSCRIPT_PACKAGE='' dracut-update-initramfs -u
-
-#DEBHELPER#

debian/dracut.triggers

@@ -1 +0,0 @@
-interest update-initramfs

debian/rules

@@ -1,3 +0,0 @@
-#!/usr/bin/make -f
-
-include /usr/share/cdbs/1/rules/debhelper.mk

dracut-catimages.8.asc

@@ -0,0 +1,59 @@
+DRACUT-CATIMAGES(8)
+===================
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+dracut-catimages - creates initial ramdisk image by concatenating images
+
+SYNOPSIS
+--------
+**dracut-catimages** [_OPTION_...] _<initramfs base image>_ [_<image>_...]
+
+DESCRIPTION
+-----------
+dracut-catimages creates an initial ramdisk image by concatenating several
+images from the command line and /boot/dracut/*.img
+
+OPTIONS
+-------
+**-f, --force**::
+    overwrite existing initramfs file.
+
+**-i, --imagedir**::
+    Directory with additional images to add (default: /boot/dracut/)
+
+**-o, --overlaydir**::
+    Overlay directory, which contains additional files that will be used to
+    create an additional image
+
+**--nooverlay**:: Do not use the overlay directory
+
+**--noimagedir**:: Do not use the additional image directory
+
+**-h, --help**:: display help text and exit.
+
+**--debug**:: output debug information of the build process
+
+**-v, --verbose**:: verbose output during the build process
+
+FILES
+-----
+_/boot/dracut/*.img_::
+    images to work with
+
+AUTHORS
+-------
+Harald Hoyer
+
+AVAILABILITY
+------------
+The dracut-catimages command is part of the dracut package and is available from
+link:$$https://dracut.wiki.kernel.org$$[https://dracut.wiki.kernel.org]
+
+SEE ALSO
+--------
+*dracut*(8)
+

dracut-catimages.8.xml

@@ -1,116 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" []>
-<!-- lifted from troff+man by doclifter -->
-<refentry id='dracutcatimages8'>
-<refmeta>
-<refentrytitle>DRACUT-CATIMAGES</refentrytitle>
-<manvolnum>8</manvolnum>
-<refmiscinfo class='source'>June 2009</refmiscinfo>
-<refmiscinfo class='manual'>Linux</refmiscinfo>
-</refmeta>
-<refnamediv id='name'>
-<refname>dracut-catimages</refname>
-<refpurpose>creates initial ramdisk image by concatenating images</refpurpose>
-</refnamediv>
-<!-- body begins here -->
-<refsynopsisdiv id='synopsis'>
-<cmdsynopsis>
-  <command>dracut-catimages</command>    <arg choice='opt' rep='repeat'><replaceable>OPTION</replaceable></arg>
-    <arg choice='plain'><replaceable>&lt;initramfs</replaceable></arg>
-    <arg choice='plain'><replaceable>base</replaceable></arg>
-    <arg choice='plain'><replaceable>image&gt;</replaceable></arg>
-    <arg choice='opt' rep='repeat'><replaceable>&lt;image&gt;</replaceable></arg>
-    <sbr/>
-</cmdsynopsis>
-</refsynopsisdiv>
-
-
-<refsect1 id='description'><title>DESCRIPTION</title>
-<para><command>dracut-catimages</command>
-creates an initial ramdisk image by concatenating several images from the command
-line and /boot/dracut/*.img</para>
-
-</refsect1>
-
-<refsect1 id='options'><title>OPTIONS</title>
-<variablelist remap='TP'>
-  <varlistentry>
-  <term><option>-f</option>, <option>--force</option></term>
-  <listitem>
-<para>overwrite existing initramfs file.</para>
-  </listitem>
-  </varlistentry>
-  <varlistentry>
-  <term><option>-i</option>, <option>--imagedir</option></term>
-  <listitem>
-<para>Directory with additional images to add (default: /boot/dracut/)</para>
-  </listitem>
-  </varlistentry>
-  <varlistentry>
-  <term><option>-o</option>, <option>--overlaydir</option></term>
-  <listitem>
-<para>Overlay directory, which contains additional files that will be used to create an additional image</para>
-  </listitem>
-  </varlistentry>
-  <varlistentry>
-  <term><option>--nooverlay</option></term>
-  <listitem>
-<para>Do not use the overlay directory</para>
-  </listitem>
-  </varlistentry>
-  <varlistentry>
-  <term><option>--noimagedir</option></term>
-  <listitem>
-<para>Do not use the additional image directory</para>
-  </listitem>
-  </varlistentry>
-  <varlistentry>
-  <term><option>-h</option>, <option>--help</option></term>
-  <listitem>
-<para>display help text and exit.</para> 
-  </listitem>
-  </varlistentry>
-  <varlistentry>
-  <term><option>--debug</option></term>
-  <listitem>
-<para>output debug information of the build process</para>
-  </listitem>
-  </varlistentry>
-  <varlistentry>
-  <term><option>-v</option>, <option>--verbose</option></term>
-  <listitem>
-<para>verbose output during the build process</para>
-
-  </listitem>
-  </varlistentry>
-</variablelist>
-</refsect1>
-
-<refsect1 id='files'><title>FILES</title>
-<variablelist remap='TP'>
-  <varlistentry>
-  <term><filename>/boot/dracut/*.img</filename></term>
-  <listitem>
-<para></para> <!-- FIXME: blank list item -->
-  </listitem>
-  </varlistentry>
-</variablelist>
-</refsect1>
-
-<refsect1 id='authors'><title>AUTHORS</title>
-<literallayout remap='.nf'>
-Harald Hoyer &lt;harald@redhat.com&gt;
-</literallayout> <!-- .fi -->
-</refsect1>
-
-<refsect1 id='availability'><title>AVAILABILITY</title>
-<para>The dracut-catimages command is part of the dracut package and is available from
-<ulink url='http://sourceforge.net/apps/trac/dracut/wiki'>http://sourceforge.net/apps/trac/dracut/wiki</ulink></para>
-
-</refsect1>
-
-<refsect1 id='see_also'><title>SEE ALSO</title>
-<para><citerefentry><refentrytitle>dracut</refentrytitle><manvolnum>8</manvolnum></citerefentry></para>
-</refsect1>
-</refentry>
-

dracut-catimages.sh

@@ -39,7 +39,7 @@ Creates initial ramdisk image by concatenating several images from the command
 line and /boot/dracut/
 
   -f, --force           Overwrite existing initramfs file.
-  -i, --imagedir        Directory with additional images to add 
+  -i, --imagedir        Directory with additional images to add
                         (default: /boot/dracut/)
   -o, --overlaydir      Overlay directory, which contains files that
                         will be used to create an additional image
@@ -120,7 +120,7 @@ images+=($@)
 dinfo "Using base image $baseimage"
 cat "$baseimage" > "$outfile"
 
-for i in "${images[@]}"; do 
+for i in "${images[@]}"; do
     dinfo "Appending $i"
     cat "$i" >> "$outfile"
 done

dracut-functions

@@ -1,796 +0,0 @@
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-#
-# functions used by dracut and other tools.
-#
-# Copyright 2005-2009 Red Hat, Inc.  All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-if ! [[ $dracutbasedir ]]; then
-    dracutbasedir=${BASH_SOURCE[0]%/*}
-    [[ $dracutbasedir = "dracut-functions" ]] && dracutbasedir="."
-    [[ $dracutbasedir ]] || dracutbasedir="."
-    dracutbasedir="$(readlink -f $dracutbasedir)"
-fi
-
-if ! type dinfo >/dev/null 2>&1; then
-    . "$dracutbasedir/dracut-logger"
-    dlog_init
-fi
-
-IF_RTLD=""
-IF_dynamic=""
-
-# Generic substring function.  If $2 is in $1, return 0.
-strstr() { [[ $1 =~ $2 ]]; }
-
-# Create all subdirectories for given path without creating the last element.
-# $1 = path
-mksubdirs() { mkdir -m 0755 -p ${1%/*}; }
-
-# Version comparision function.  Assumes Linux style version scheme.
-# $1 = version a
-# $2 = comparision op (gt, ge, eq, le, lt, ne)
-# $3 = version b
-vercmp() {
-    local n1=(${1//./ }) op=$2 n2=(${3//./ }) i res
-
-    for ((i=0; ; i++))
-    do
-        if [[ ! ${n1[i]}${n2[i]} ]]; then res=0
-        elif ((${n1[i]:-0} > ${n2[i]:-0})); then res=1
-        elif ((${n1[i]:-0} < ${n2[i]:-0})); then res=2
-        else continue
-        fi
-        break
-    done
-
-    case $op in
-        gt) ((res == 1));;
-        ge) ((res != 2));;
-        eq) ((res == 0));;
-        le) ((res != 1));;
-        lt) ((res == 2));;
-        ne) ((res != 0));;
-    esac
-}
-
-is_func() {
-    [[ $(type -t $1) = "function" ]]
-}
-
-# Function prints global variables in format name=value line by line.
-# $@ = list of global variables' name
-print_vars() {
-    local var value
-
-    for var in $@
-    do
-        value=$(eval echo \$$var)
-        [[ ${value} ]] && echo "${var}=\"${value}\""
-    done
-}
-
-get_fs_env() {
-    [[ $1 ]] || return
-    eval $(udevadm info --query=env --name=$1|egrep 'ID_FS_(TYPE|UUID)=')
-    [[ $ID_FS_TYPE ]] && return
-
-    if [[ -x /lib/udev/vol_id ]]; then
-        eval $(/lib/udev/vol_id --export $1)
-    elif find_binary blkid >/dev/null; then
-        eval $(blkid -o udev $1)
-    else
-        return 1
-    fi
-}
-
-get_fs_type() (
-    [[ $1 ]] || return
-    if [[ $1 != ${1#/dev/block/nfs:} ]] \
-        || [[ $1 != ${1#/dev/block/nfs3:} ]] \
-        || [[ $1 != ${1#/dev/block/nfs4:} ]]; then
-        echo "nfs"
-        return
-    fi
-    get_fs_env $1 || return
-    echo $ID_FS_TYPE
-)
-
-get_fs_uuid() (
-    get_fs_env $1 || return
-    echo $ID_FS_UUID
-)
-
-# finds the major:minor of the block device backing the root filesystem.
-find_block_device() {
-    local x mpt majmin dev fs misc maj min
-    if [[ $use_fstab != yes ]]; then
-        while read x x majmin x mpt x x fs dev misc; do
-            [[ $fs = nfs ]] && { echo $dev; return 0;}
-            [[ $fs = nfs3 ]] && { echo $dev; return 0;}
-            [[ $fs = nfs4 ]] && { echo $dev; return 0;}
-            [[ $fs = btrfs ]] && {
-                ls -nLl "$dev" | {
-                    read x x x x maj min x
-                    maj=${maj//,/}
-                    echo $maj:$min
-                } && return 0
-            }
-            if [[ $mpt = $1 ]] && [[ ${majmin#0:} = $majmin ]]; then
-                echo $majmin
-                return 0 # we have a winner!
-            fi
-        done < /proc/self/mountinfo
-    fi
-    # fall back to /etc/fstab
-    while read dev mpt fs misc; do
-        if [[ $mpt = $1 ]]; then
-            [[ $fs = nfs ]] && { echo $dev; return 0;}
-            [[ $fs = nfs3 ]] && { echo $dev; return 0;}
-            [[ $fs = nfs4 ]] && { echo $dev; return 0;}
-            [[ $dev != ${dev#UUID=} ]] && dev=/dev/disk/by-uuid/${dev#UUID=}
-            [[ $dev != ${dev#LABEL=} ]] && dev=/dev/disk/by-label/${dev#LABEL=}
-            [[ -b $dev ]] || return 1 # oops, not a block device.
-            ls -nLl "$dev" | {
-                read x x x x maj min x
-                maj=${maj//,/}
-                echo $maj:$min
-            } && return 0
-        fi
-    done < /etc/fstab
-
-    return 1
-}
-
-find_root_block_device() { find_block_device /; }
-
-# Walk all the slave relationships for a given block device.
-# Stop when our helper function returns success
-# $1 = function to call on every found block device
-# $2 = block device in major:minor format
-check_block_and_slaves() {
-    local x
-    [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry.
-    "$1" $2 && return
-    check_vol_slaves "$@" && return 0
-    if [[ -f /sys/dev/block/$2/../dev ]]; then
-        check_block_and_slaves $1 $(cat "/sys/dev/block/$2/../dev") && return 0
-    fi
-    [[ -d /sys/dev/block/$2/slaves ]] || return 1
-    for x in /sys/dev/block/$2/slaves/*/dev; do
-        [[ -f $x ]] || continue
-        check_block_and_slaves $1 $(cat "$x") && return 0
-    done
-    return 1
-}
-
-get_numeric_dev() {
-    ls -lH "$1" | { read a b c d maj min rest; printf "%d:%d" ${maj%%,} $min; }
-}
-
-# ugly workaround for the lvm design
-# There is no volume group device,
-# so, there are no slave devices for volume groups.
-# Logical volumes only have the slave devices they really live on,
-# but you cannot create the logical volume without the volume group.
-# And the volume group might be bigger than the devices the LV needs.
-check_vol_slaves() {
-    for i in /dev/mapper/*; do
-        lv=$(get_numeric_dev $i)
-        if [[ $lv = $2 ]]; then
-            vg=$(lvm lvs --noheadings -o vg_name $i 2>/dev/null)
-            # strip space
-            vg=$(echo $vg)
-            if [[ $vg ]]; then
-                for pv in $(lvm vgs --noheadings -o pv_name "$vg" 2>/dev/null)
-                do
-                    check_block_and_slaves $1 $(get_numeric_dev $pv) && return 0
-                done
-            fi
-        fi
-    done
-    return 1
-}
-
-# Install a directory, keeping symlinks as on the original system.
-# Example: if /lib64 points to /lib on the host, "inst_dir /lib/file"
-# will create ${initdir}/lib64, ${initdir}/lib64/file,
-# and a symlink ${initdir}/lib -> lib64.
-inst_dir() {
-    local dir="$1"
-    [[ -e ${initdir}$dir ]] && return 0
-
-    # iterate over parent directories
-    local file=""
-    local IFS="/"
-    for part in $dir; do
-        [[ $part ]] || continue
-        file="$file/$part"
-        [[ -e ${initdir}$file ]] && continue
-
-        if [[ -L $file ]]; then
-            # create link as the original
-            local target=$(readlink "$file")
-            ln -sfn "$target" "${initdir}$file" || return 1
-            # resolve relative path and recursively install destination
-            [[ $target == ${target#/} ]] && target="$(dirname "$file")/$target"
-            inst_dir "$target"
-        else
-            # create directory
-            mkdir -m 0755 -p "${initdir}$file" || return 1
-        fi
-    done
-}
-
-# $1 = file to copy to ramdisk
-# $2 (optional) Name for the file on the ramdisk
-# Location of the image dir is assumed to be $initdir
-# We never overwrite the target if it exists.
-inst_simple() {
-    local src target
-    [[ -f $1 ]] || return 1
-    src=$1 target="${2:-$1}"
-    if ! [[ -d ${initdir}$target ]]; then
-        [[ -e ${initdir}$target ]] && return 0
-        inst_dir "${target%/*}"
-    fi
-    # install checksum files also
-    if [[ -e "${src%/*}/.${src##*/}.hmac" ]]; then
-        inst "${src%/*}/.${src##*/}.hmac" "${target%/*}/.${target##*/}.hmac"
-    fi
-    ddebug "Installing $src" 
-    cp -pfL "$src" "${initdir}$target"
-}
-
-# find symlinks linked to given library file
-# $1 = library file
-# Function searches for symlinks by stripping version numbers appended to
-# library filename, checks if it points to the same target and finally
-# prints the list of symlinks to stdout.
-#
-# Example:
-# rev_lib_symlinks libfoo.so.8.1
-# output: libfoo.so.8 libfoo.so
-# (Only if libfoo.so.8 and libfoo.so exists on host system.)
-rev_lib_symlinks() {
-    [[ ! $1 ]] && return 0
-
-    local fn="$1" orig="$(readlink -f "$1")" links=''
-
-    [[ ${fn} =~ .*\.so\..* ]] || return 1
-
-    until [[ ${fn##*.} == so ]]; do
-        fn="${fn%.*}"
-        [[ -L ${fn} && $(readlink -f "${fn}") == ${orig} ]] && links+=" ${fn}"
-    done
-
-    echo "${links}"
-}
-
-# Same as above, but specialized to handle dynamic libraries.
-# It handles making symlinks according to how the original library
-# is referenced.
-inst_library() {
-    local src=$1 dest=${2:-$1} lib reallib symlink
-    [[ -e $initdir$dest ]] && return 0
-    if [[ -L $src ]]; then
-        # install checksum files also
-        if [[ -e "${src%/*}/.${src##*/}.hmac" ]]; then
-            inst "${src%/*}/.${src##*/}.hmac" "${dest%/*}/.${dest##*/}.hmac"
-        fi
-        reallib=$(readlink -f "$src")
-        lib=${src##*/}
-        inst_simple "$reallib" "$reallib"
-        inst_dir "${dest%/*}"
-        (cd "${initdir}${dest%/*}" && ln -s "$reallib" "$lib")
-    else
-        inst_simple "$src" "$dest"
-    fi
-
-    # Create additional symlinks.  See rev_symlinks description.
-    for symlink in $(rev_lib_symlinks $src) $(rev_lib_symlinks $reallib); do
-        [[ ! -e $initdir$symlink ]] && {
-            ddebug "Creating extra symlink: $symlink"
-            inst_symlink $symlink
-        }
-    done
-}
-
-# find a binary.  If we were not passed the full path directly,
-# search in the usual places to find the binary.
-find_binary() {
-    local binpath="/bin /sbin /usr/bin /usr/sbin" p
-    if [[ -z ${1##/*} ]]; then
-        if [[ -x $1 ]] || ldd $1 &>/dev/null; then
-            echo $1
-            return 0
-        fi
-    fi
-    for p in $binpath; do
-        [[ -x $p/$1 ]] && { echo "$p/$1"; return 0; }
-    done
-    return 1
-}
-
-# Same as above, but specialized to install binary executables.
-# Install binary executable, and all shared library dependencies, if any.
-inst_binary() {
-    local bin target
-    bin=$(find_binary "$1") || return 1
-    target=${2:-$bin}
-    inst_symlink $bin $target && return 0
-    local LDSO NAME IO FILE ADDR I1 n f TLIBDIR
-    [[ -e $initdir$target ]] && return 0
-    # I love bash!
-    LC_ALL=C ldd $bin 2>/dev/null | while read line; do
-        [[ $line = 'not a dynamic executable' ]] && return 1
-        if [[ $line =~ not\ found ]]; then
-            dfatal "Missing a shared library required by $bin."
-            dfatal "Run \"ldd $bin\" to find out what it is."
-            dfatal "dracut cannot create an initrd."
-            exit 1
-        fi
-        so_regex='([^ ]*/lib[^/]*/[^ ]*\.so[^ ]*)'
-        [[ $line =~ $so_regex ]] || continue
-        FILE=${BASH_REMATCH[1]}
-        [[ -e ${initdir}$FILE ]] && continue
-        # see if we are loading an optimized version of a shared lib.
-        lib_regex='^(/lib[^/]*).*'
-        if [[ $FILE =~ $lib_regex ]]; then
-            TLIBDIR=${BASH_REMATCH[1]}
-            BASE=${FILE##*/}
-            # prefer nosegneg libs, then unoptimized ones.
-            for f in "$TLIBDIR/i686/nosegneg" "$TLIBDIR"; do
-                [[ -e $f/$BASE ]] || continue
-                FILE=$f/$BASE
-                break
-            done
-            inst_library "$FILE" "$TLIBDIR/$BASE"
-            IF_dynamic=yes
-            continue
-            fi
-            inst_library "$FILE"
-    done
-    inst_simple "$bin" "$target"
-}
-
-# same as above, except for shell scripts.
-# If your shell script does not start with shebang, it is not a shell script.
-inst_script() {
-    [[ -f $1 ]] || return 1
-    local line
-    read -r -n 80 line <"$1"
-    # If debug is set, clean unprintable chars to prevent messing up the term
-    [[ $debug ]] && line=$(echo -n "$line" | tr -c -d '[:print:][:space:]')
-    shebang_regex='(#! *)(/[^ ]+).*'
-    [[ $line =~ $shebang_regex ]] || return 1
-    inst "${BASH_REMATCH[2]}" && inst_simple "$@"
-}
-
-# same as above, but specialized for symlinks
-inst_symlink() {
-    local src=$1 target=$initdir${2:-$1} realsrc
-    [[ -L $1 ]] || return 1
-    [[ -L $target ]] && return 0
-    realsrc=$(readlink -f "$src")
-    [[ $realsrc = ${realsrc##*/} ]] && realsrc=${src%/*}/$realsrc
-    inst "$realsrc" && mkdir -m 0755 -p "${target%/*}" && \
-        ln -s "$realsrc" "$target"
-}
-
-# find a udev rule in the usual places.
-find_rule() {
-    [[ -f $1 ]] && { echo "$1"; return 0; }
-    for r in . /lib/udev/rules.d /etc/udev/rules.d $dracutbasedir/rules.d; do
-        [[ -f $r/$1 ]] && { echo "$r/$1"; return 0; }
-    done
-    return 1
-}
-
-# udev rules always get installed in the same place, so
-# create a function to install them to make life simpler.
-inst_rules() {
-    local target=/etc/udev/rules.d rule found
-
-    inst_dir "/lib/udev/rules.d"
-    inst_dir "$target"
-    for rule in "$@"; do 
-        for r in /lib/udev/rules.d /etc/udev/rules.d; do
-            if [[ -f $r/$rule ]]; then
-                found="$r/$rule"
-                inst_simple "$found"
-            fi
-        done    
-        for r in '' ./ $dracutbasedir/rules.d/; do
-            if [[ -f ${r}$rule ]]; then
-                found="${r}$rule"
-                inst_simple "$found" "$target/${found##*/}" 
-            fi
-        done
-        [[ $found ]] || dinfo "Skipping udev rule: $rule"
-    done
-}
-
-# general purpose installation function
-# Same args as above.
-inst() {
-    case $# in
-        1) ;;
-        2) [[ ! $initdir && -d $2 ]] && export initdir=$2
-            [[ $initdir = $2 ]] && set $1;;
-        3) [[ -z $initdir ]] && export initdir=$2
-            set $1 $3;;
-        *) dfatal "inst only takes 1 or 2 or 3 arguments"
-            exit 1;;
-    esac
-    for x in inst_symlink inst_script inst_binary inst_simple; do
-        $x "$@" && return 0
-    done
-    return 1
-}
-
-[[ $hookdirs ]] || {
-    hookdirs="cmdline pre-udev pre-trigger netroot initqueue pre-mount"
-    hookdirs+=" pre-pivot mount emergency"
-    export hookdirs
-}
-
-# install function specialized for hooks
-# $1 = type of hook, $2 = hook priority (lower runs first), $3 = hook
-# All hooks should be POSIX/SuS compliant, they will be sourced by init.
-inst_hook() {
-    if ! [[ -f $3 ]]; then
-        dfatal "Cannot install a hook ($3) that does not exist."
-        dfatal "Aborting initrd creation."
-        exit 1
-    elif ! strstr "$hookdirs" "$1"; then
-        dfatal "No such hook type $1. Aborting initrd creation." 
-        exit 1
-    fi
-    inst_simple "$3" "/lib/dracut/hooks/${1}/${2}${3##*/}"
-}
-
-dracut_install() {
-    if [[ $1 = '-o' ]]; then
-        local optional=yes
-        shift
-    fi
-    while (($# > 0)); do
-        if ! inst "$1" ; then
-            if [[ $optional = yes ]]; then
-                dwarn "Skipping program $1 as it cannot be found and is" \
-                    "flagged to be optional"
-            else
-                dfatal "Failed to install $1"
-                exit 1
-            fi
-        fi
-        shift
-    done
-}
-
-# install function decompressing the target and handling symlinks
-# $@ = list of compressed (gz or bz2) files or symlinks pointing to such files
-#
-# Function install targets in the same paths inside overlay but decompressed
-# and without extensions (.gz, .bz2).
-inst_decompress() {
-    local src dst realsrc realdst cmd
-
-    for src in $@
-    do
-        case ${src} in
-            *.gz) cmd='gzip -d' ;;
-            *.bz2) cmd='bzip2 -d' ;;
-            *) return 1 ;;
-        esac
-
-        if [[ -L ${src} ]]
-        then
-            realsrc="$(readlink -f ${src})" # symlink target with extension
-            dst="${src%.*}" # symlink without extension
-            realdst="${realsrc%.*}" # symlink target without extension
-            mksubdirs "${initdir}/${src}"
-            # Create symlink without extension to target without extension.
-            ln -s "${realdst}" "${initdir}/${dst}"
-        fi
-
-        # If the source is symlink we operate on its target.
-        [[ ${realsrc} ]] && src=${realsrc}
-        inst ${src}
-        # Decompress with chosen tool.  We assume that tool changes name e.g.
-        # from 'name.gz' to 'name'.
-        ${cmd} "${initdir}${src}"
-    done
-}
-
-# It's similar to above, but if file is not compressed, performs standard
-# install.
-# $@ = list of files
-inst_opt_decompress() {
-    local src
-
-    for src in $@
-    do
-        inst_decompress "${src}" || inst "${src}"
-    done
-}
-
-module_check() {
-    local moddir=$(echo ${dracutbasedir}/modules.d/??${1})
-    [[ -d $moddir ]] || return 1
-    if [[ ! -f $moddir/module-setup.sh ]]; then
-        # if we do not have a check script, we are unconditionally included
-        [[ -x $moddir/check ]] || return 0
-        $moddir/check $hostonly
-        return $?
-    else
-        unset check depends install installkernel
-        . $moddir/module-setup.sh
-        is_func check || return 0
-        check
-        ret=$?
-        unset check depends install installkernel
-        return $ret
-    fi
-}
-
-module_depends() {
-    local moddir=$(echo ${dracutbasedir}/modules.d/??${1})
-    [[ -d $moddir ]] || return 1
-    if [[ ! -f $moddir/module-setup.sh ]]; then
-        # if we do not have a check script, we have no deps
-        [[ -x $moddir/check ]] || return 0
-        $moddir/check -d
-        return $?
-    else
-        unset check depends install installkernel
-        . $moddir/module-setup.sh
-        is_func depends || return 0
-        depends
-        ret=$?
-        unset check depends install installkernel
-        return $ret
-    fi
-}
-
-module_install() {
-    local moddir=$(echo ${dracutbasedir}/modules.d/??${1})
-    [[ -d $moddir ]] || return 1
-    if [[ ! -f $moddir/module-setup.sh ]]; then
-        [[ -x $moddir/install ]] && . "$moddir/install"
-        return $?
-    else
-        unset check depends install installkernel
-        . $moddir/module-setup.sh
-        is_func install || return 0
-        install
-        ret=$?
-        unset check depends install installkernel
-        return $ret
-    fi
-}
-
-module_installkernel() {
-    local moddir=$(echo ${dracutbasedir}/modules.d/??${1})
-    [[ -d $moddir ]] || return 1
-    if [[ ! -f $moddir/module-setup.sh ]]; then
-        [[ -x $moddir/installkernel ]] && . "$moddir/installkernel"
-        return $?
-    else
-        unset check depends install installkernel
-        . $moddir/module-setup.sh
-        is_func installkernel || return 0
-        installkernel
-        ret=$?
-        unset check depends install installkernel
-        return $ret
-    fi
-}
-
-check_module() {
-    local mod=$1;
-    local moddir=$(echo ${dracutbasedir}/modules.d/??${1})
-    local moddep;
-    # If we are already scheduled to be loaded, no need to check again.
-    strstr " $mods_to_load " " $mod " && return 0
-    strstr " $mods_checked_as_dep " " $mod " && return 1
-
-    # This should never happen, but...
-    [[ -d $moddir ]] || return 1
-
-    [[ $2 ]] || mods_checked_as_dep+=" $mod "
-
-    strstr " $omit_dracutmodules " " $mod " && return 1
-
-    if strstr " $dracutmodules $add_dracutmodules " " $mod "; then
-        module_check $mod; ret=$?
-        # explicit module, so also accept ret=255
-        [[ $ret = 0 || $ret = 255 ]] || return 1
-    else
-        # module not in our list
-        if [[ $dracutmodules = all ]]; then
-            # check, if we can and should install this module
-            module_check $mod || return 1
-        else
-            # skip this module
-            return 1
-        fi
-    fi
-
-    for moddep in $(module_depends $mod); do
-        # handle deps as if they were manually added
-        strstr " $add_dracutmodules " " $moddep " || \
-            add_dracutmodules+=" $moddep "
-        # if a module we depend on fail, fail also
-        check_module $moddep || return 1
-    done
-
-    strstr " $mods_to_load " " $mod " || \
-        mods_to_load+=" $mod "
-
-    return 0
-}
-
-check_module_dir() {
-    local modcheck;
-    local mod;
-    mods_to_load=""
-    for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
-        local mod=${moddir##*/}; mod=${mod#[0-9][0-9]}
-        check_module $mod 1
-    done
-
-    # Report any missing dracut modules, the user has specified
-    modcheck=$add_dracutmodules
-    [[ $dracutmodules != all ]] && modcheck="$m $dracutmodules"
-    for mod in $modcheck; do
-        strstr "$mods_to_load" "$mod" && continue
-        strstr "$omit_dracutmodules" "$mod" && continue
-        derror "Dracut module \"$mod\" cannot be found."
-    done
-}
-
-# Install a single kernel module along with any firmware it may require.
-# $1 = full path to kernel module to install
-install_kmod_with_fw() {
-    local modname=${1##*/} fwdir found
-    modname=${modname%.ko*}
-    # no need to go further if the module is already installed
-    [[ -e "${initdir}/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" ]] \
-        && return 0
-    inst_simple "$1" "/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" \
-        || return $?
-    for fw in $(modinfo -k $kernel -F firmware $1 2>/dev/null); do
-        found=''
-        for fwdir in $fw_dir; do
-            if [[ -d $fwdir && -f $fwdir/$fw ]]; then
-                inst_simple "$fwdir/$fw" "/lib/firmware/$fw"
-                found=yes
-            fi
-        done
-        if [[ $found != yes ]]; then
-            dwarn "Possible missing firmware \"${fw}\" for kernel module" \
-                "\"${mod}.ko\""
-        fi
-    done
-    return 0
-}
-
-# Do something with all the dependencies of a kernel module.
-# Note that kernel modules depend on themselves using the technique we use
-# $1 = function to call for each dependency we find
-#      It will be passed the full path to the found kernel module
-# $2 = module to get dependencies for
-# rest of args = arguments to modprobe
-for_each_kmod_dep() {
-    local func=$1 kmod=$2 cmd modpapth options
-    shift 2
-    modprobe "$@" --ignore-install --show-depends $kmod 2>/dev/null | (
-        local found=0
-        while read cmd modpath options; do
-            [[ $cmd = insmod ]] || continue
-            $func ${modpath} || exit $?
-            found=1
-        done
-        [[ $found -eq 0 ]] && exit 1
-        exit 0
-    )
-    return $?
-}
-
-# filter kernel modules to install certain modules that meet specific
-# requirements.
-# $1 = function to call with module name to filter.
-#      This function will be passed the full path to the module to test.
-# The behaviour of this function can vary depending on whether $hostonly is set.
-# If it is, we will only look at modules that are already in memory.
-# If it is not, we will look at all kernel modules
-# This function returns the full filenames of modules that match $1
-filter_kernel_modules () (
-    if ! [[ $hostonly ]]; then
-        filtercmd='find "$srcmods/kernel/drivers" "$srcmods/extra"'
-        filtercmd+=' "$srcmods/weak-updates" -name "*.ko" -o -name "*.ko.gz"'
-        filtercmd+=' 2>/dev/null'
-    else
-        filtercmd='cut -d " " -f 1 </proc/modules|xargs modinfo -F filename '
-        filtercmd+='-k $kernel 2>/dev/null'
-    fi
-    for modname in $(eval $filtercmd); do
-        case $modname in
-            *.ko) "$1" "$modname" && echo "$modname";;
-            *.ko.gz) gzip -dc "$modname" > $initdir/$$.ko
-                $1 $initdir/$$.ko && echo "$modname"
-                rm -f $initdir/$$.ko
-                ;;
-        esac
-    done
-)
-
-# install kernel modules along with all their dependencies.
-instmods() {
-    [[ $no_kernel = yes ]] && return
-    local mod mpargs modpath modname cmd moddirname
-    local ret=0
-    while (($# > 0)); do
-        mod=${1%.ko*}
-        case $mod in
-            =*)
-                # This introduces 2 incompatible meanings for =* arguments
-                # to instmods.  We need to decide which one to keep.
-                if [[ $mod = =ata && -f $srcmods/modules.block ]]; then
-                    instmods $mpargs \
-                        $(egrep 'ata|ahci' "${srcmods}/modules.block")
-                elif [ -f $srcmods/modules.${mod#=} ]; then
-                    instmods $mpargs $(cat ${srcmods}/modules.${mod#=} )
-                else
-                    instmods $mpargs $(find "$srcmods" -path "*/${mod#=}/*")
-                fi
-                ;;
-            --*)
-                mod=${mod##*/}
-                mpargs+=" $mod";;
-            i2o_scsi) shift; continue;; # Do not load this diagnostic-only module
-            *)  mod=${mod##*/}
-                # if we are already installed, skip this module and go on
-                # to the next one.
-                [[ -f $initdir/$1 ]] && { shift; continue; }
-                # If we are building a host-specific initramfs and this
-                # module is not already loaded, move on to the next one.
-                [[ $hostonly ]] && ! grep -qe "\<${mod//-/_}\>" /proc/modules \
-                    && ! echo $add_drivers | grep -qe "\<${mod}\>" && {
-                        shift; continue
-                    }
-
-                # We use '-d' option in modprobe only if modules prefix path
-                # differs from default '/'.  This allows us to use Dracut with
-                # old version of modprobe which doesn't have '-d' option.
-                moddirname=${srcmods%%/lib/modules/*}
-                [[ -n ${moddirname} ]] && moddirname="-d ${moddirname}/"
-
-                # ok, load the module, all its dependencies, and any firmware
-                # it may require
-                for_each_kmod_dep install_kmod_with_fw $mod \
-                    --set-version $kernel ${moddirname}
-                ret=$((ret+$?))
-                ;;
-        esac
-        shift
-    done
-    return $ret
-}

dracut-gencmdline

@@ -1,716 +0,0 @@
-#!/bin/bash --norc
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-#
-# Copyright 2005-2009 Red Hat, Inc.  All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-# code taken from mkinitrd
-#
-#. /usr/libexec/initrd-functions
-
-IF_verbose=""
-function set_verbose() {
-    case $1 in
-        1|true|yes|on)
-            IF_verbose="-v"
-            ;;
-        0|false|no|off)
-            IF_verbose=""
-            ;;
-    esac
-}
-
-function is_verbose() {
-    [ -n "$IF_verbose" ] && return 0
-    return 1
-}
-
-function get_verbose() {
-    echo "$IF_verbose"
-    is_verbose
-}
-
-
-function get_numeric_dev() {
-    (
-        fmt="%d:%d"
-        if [ "$1" == "hex" ]; then
-            fmt="%x:%x"
-        fi
-        ls -lH "$2" | awk '{ sub(/,/, "", $5); printf("'"$fmt"'", $5, $6); }'
-    ) 2>/dev/null
-}
-
-
-function error() {
-    echo "$@" >&2
-}
-
-function vecho() {
-    is_verbose && echo "$@"
-}
-
-# module dep finding and installation functions
-moduledep() {
-    MPARGS=""
-    if [ "$1" == "--ignore-install" ]; then
-        MPARGS="$MPARGS --ignore-install"
-        shift
-    fi
-    vecho -n "Looking for deps of module $1"
-    deps=""
-    deps=$(modprobe $MPARGS --set-version $kernel --quiet --show-depends $1 | awk '/^insmod / { print gensub(".*/","","g",$2) }' | while read foo ; do [ "${foo%%.ko}" != "$1" ] && echo -n "${foo%%.ko} " ; done)
-    [ -n "$deps" ] && vecho ": $deps" || vecho
-}
-
-export MALLOC_PERTURB_=204
-
-PATH=/sbin:/usr/sbin:/bin:/usr/bin:$PATH
-export PATH
-
-# Set the umask. For iscsi, the initrd can contain plaintext
-# password (chap secret), so only allow read by owner.
-umask 077
-
-VERSION=6.0.87
-
-PROBE="yes"
-MODULES=""
-GRAPHICSMODS=""
-PREMODS=""
-DMRAIDS=""
-ncryptodevs=0
-ncryptoparts=0
-ncryptolvs=0
-ncryptoraids=0
-root=""
-scsi_wait_scan="no"
-
-NET_LIST=""
-LD_SO_CONF=/etc/ld.so.conf
-LD_SO_CONF_D=/etc/ld.so.conf.d/
-
-[ -e /etc/sysconfig/mkinitrd ] && . /etc/sysconfig/mkinitrd
-
-CONFMODS="$MODULES"
-MODULES=""
-ARCH=$(uname -m | sed -e 's/s390x/s390/')
-
-compress=1
-allowmissing=""
-target=""
-kernel=""
-force=""
-img_vers=""
-builtins=""
-modulefile=/etc/modules.conf
-[ "$ARCH" != "s390" ] && withusb=1
-rc=0
-nolvm=""
-nodmraid=""
-
-IMAGESIZE=8000
-PRESCSIMODS=""
-fstab="/etc/fstab"
-
-vg_list=""
-net_list="$NET_LIST"
-
-usage () {
-    if [ "$1" == "-n" ]; then
-        cmd=echo
-    else
-        cmd=error
-    fi
-
-    $cmd "usage: `basename $0` [--version] [--help] [-v] [-f]"
-
-    if [ "$1" == "-n" ]; then
-        exit 0
-    else
-        exit 1
-    fi
-}
-
-
-qpushd() {
-    pushd "$1" >/dev/null 2>&1
-}
-
-qpopd() {
-    popd >/dev/null 2>&1
-}
-
-
-freadlink() {
-    readlink -f "$1"
-}
-
-resolve_device_name() {
-    if [ -z "${1##UUID=*}" ]; then
-        real=$(freadlink /dev/disk/by-uuid/${1##UUID=})
-        [ -b $real ] && { echo $real; return; }
-    fi
-    if [ -z "${1##LABEL=*}" ]; then
-        real=$(freadlink /dev/disk/by-label/${1##LABEL=})
-        [ -b $real ] && { echo $real; return; }
-    fi
-    echo "$1" 
-}
-
-finddevnoinsys() {
-    majmin="$1"
-    if [ -n "$majmin" ]; then
-        dev=$(for x in /sys/block/* ; do find $x/ -name dev ; done | while read device ; do \
-            echo "$majmin" | cmp -s $device && echo $device ; done)
-        if [ -n "$dev" ]; then
-            dev=${dev%%/dev}
-            dev=${dev%%/}
-            echo "$dev"
-            return 0
-        fi
-    fi
-    return 1
-}
-
-finddevicedriverinsys () {
-    if is_iscsi $PWD; then
-        handleiscsi "$PWD"
-        return
-    fi
-    while [ "$PWD" != "/sys/devices" ]; do
-        deps=
-        if [ -f modalias ]; then
-            MODALIAS=$(cat modalias)
-            if [ "${MODALIAS::7}" == "scsi:t-" ]; then
-                scsi_wait_scan=yes
-            fi
-            moduledep $MODALIAS
-            unset MODALIAS
-        fi
-
-        cd ..
-    done
-}
-
-findstoragedriverinsys () {
-    local sysfs=$(freadlink "$1")
-
-    # if its a partition look at the device holding the partition
-    if [ -f "$sysfs/start" ]; then
-        sysfs=$(freadlink ${sysfs%/*})
-    fi
-
-    if [[ ! "$sysfs" =~ ^/sys/.*block/.*$ ]]; then
-        #error "WARNING: $sysfs is a not a block sysfs path, skipping"
-        return
-    fi
-
-    case " $handleddevices " in
-        *" $sysfs "*)
-            return ;;
-        *) handleddevices="$handleddevices $sysfs" ;;
-    esac
-
-    if [[ "$sysfs" =~ ^/sys/.*block/md[0-9]+$ ]]; then
-        local raid=${sysfs##*/}
-        vecho "Found MDRAID component $raid"
-        handleraid $raid
-    fi
-    if [[ "$sysfs" =~ ^/sys/.*block/dm-[0-9]+$ ]]; then
-        vecho "Found DeviceMapper component ${sysfs##*/}"
-        handledm $(cat $sysfs/dev |cut -d : -f 1) $(cat $sysfs/dev |cut -d : -f 2)
-    fi
-
-    for slave in $(ls -d "$sysfs"/slaves/* 2>/dev/null) ; do
-        findstoragedriverinsys "$slave"
-    done
-
-    if [ -L "$sysfs/device" ]; then
-        qpushd $(freadlink "$sysfs/device")
-        finddevicedriverinsys
-        qpopd
-    fi
-}
-
-findstoragedriver () {
-    local device="$1"
-
-    if [ ! -b "$device" ]; then
-        #error "WARNING: $device is a not a block device, skipping"
-        return
-    fi
-
-    local majmin=$(get_numeric_dev dec "$device")
-    local sysfs=$(finddevnoinsys "$majmin")
-
-    if [ -z "$sysfs" ]; then
-        #error "WARNING: $device major:minor $majmin not found, skipping"
-        return
-    fi
-
-    vecho "Looking for driver for $device in $sysfs"
-    findstoragedriverinsys "$sysfs"
-}
-
-iscsi_get_rec_val() {
-
-    # The open-iscsi 742 release changed to using flat files in
-    # /var/lib/iscsi.
-
-    result=$(grep "^${2} = " "$1" |  sed -e s'/.* = //')
-}
-
-iscsi_set_parameters() {
-    path=$1
-    vecho setting iscsi parameters
-
-    tmpfile=$(mktemp)
-
-    # Check once before getting explicit values, so we can output a decent
-    # error message.
-    /sbin/iscsiadm --show -m session -r $path > $tmpfile
-    if [ ! -s $tmpfile ]; then
-        echo Unable to find iscsi record for $path
-        exit 1
-    fi
-
-    nit_name=$(grep "^InitiatorName=" /etc/iscsi/initiatorname.iscsi | \
-        sed -e "s/^InitiatorName=//")
-
-    iscsi_get_rec_val $tmpfile "node.name"
-    tgt_name=${result}
-    iscsi_get_rec_val $tmpfile "node.tpgt"
-    tpgt=${result}
-    # iscsistart wants node.conn[0].address / port
-    iscsi_get_rec_val $tmpfile 'node.conn\[0\].address'
-    tgt_ipaddr=${result}
-    iscsi_get_rec_val $tmpfile 'node.conn\[0\].port'
-    tgt_port=${result}
-
-    # Note: we get chap secrets (passwords) in plaintext, and also store
-    # them in the initrd.
-
-    iscsi_get_rec_val $tmpfile "node.session.auth.username"
-    chap=${result}
-    if [ -n "${chap}" -a "${chap}" != "<empty>" ]; then
-        chap="-u ${chap}"
-        iscsi_get_rec_val $tmpfile "node.session.auth.password" 
-        chap_pw="-w ${result}"
-    else
-        chap=""
-    fi
-
-    iscsi_get_rec_val $tmpfile "node.session.auth.username_in"
-    chap_in=${result}
-    if [ -n "${chap_in}" -a "${chap_in}" != "<empty>" ]; then
-        chap_in="-U ${chap_in}"
-        iscsi_get_rec_val $tmpfile "node.session.auth.password_in" 
-        chap_in_pw="-W ${result}"
-    else
-        chap_in=""
-    fi
-
-    rm $tmpfile
-}
-
-emit_iscsi () {
-    if [ -n "${iscsi_devs}" ]; then
-        for dev in ${iscsi_devs}; do
-            iscsi_set_parameters $dev
-            # recid is not really used, just use 0 for it
-            echo "/bin/iscsistart -t ${tgt_name} -i ${nit_name} \
-                -g ${tpgt} -a ${tgt_ipaddr} ${chap} ${chap_pw} \
-                ${chap_in} ${chap_in_pw}"
-        done
-    fi
-}
-
-is_iscsi() {
-    path=$1
-    if echo $path | grep -q "/platform/host[0-9]*/session[0-9]*/target[0-9]*:[0-9]*:[0-9]*/[0-9]*:[0-9]*:[0-9]*:[0-9]*"; then
-        return 0
-    else 
-        return 1
-    fi
-}
-
-handledm() {
-    major=$1
-    minor=$2
-    while read dmstart dmend dmtype r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 ; do
-        case "$dmtype" in
-            crypt)
-                # this device is encrypted; find the slave device and see
-                # whether the encryption is LUKS; if not, bail.
-                slavedev=$(finddevnoinsys $r3)
-                # get the basename, then s,!,/, in case it's a cciss device
-                slavedev=$(echo ${slavedev##*/} | tr '!' '/')
-                cryptsetup isLuks "/dev/$slavedev" 2>/dev/null || continue
-                find_base_dm_mods
-                dmname=$(dmsetup info -j $major -m $minor -c --noheadings -o name)
-                # do the device resolution dance to get /dev/mapper/foo
-                # since 'lvm lvs' doesn't like dm-X device nodes
-                if [[ "$slavedev" =~ ^dm- ]]; then
-                    majmin=$(get_numeric_dev dec "/dev/$slavedev")
-                    for dmdev in /dev/mapper/* ; do
-                        dmnum=$(get_numeric_dev dev $dmdev)
-                        if [ $dmnum = $majmin ]; then
-                            slavedev=${dmdev#/dev/}
-                            break
-                        fi
-                    done
-                fi
-
-                # determine if $slavedev is an LV
-                #  if so, add the device to latecryptodevs
-                #  if not, add the device to cryptodevs
-                local vg=$(lvshow /dev/$slavedev)
-                if [ -n "$vg" ]; then
-                    eval cryptolv${ncryptolvs}='"'/dev/$slavedev $dmname'"'
-                    let ncryptolvs++
-                elif grep -q "^$slavedev :" /proc/mdstat ; then
-                    eval cryptoraid${ncryptoraids}='"'/dev/$slavedev $dmname'"'
-                    let ncryptoraids++
-                else
-                    eval cryptoparts${ncryptoparts}='"'/dev/$slavedev $dmname'"'
-                    let ncryptoparts++
-                fi
-
-                let ncryptodevs++
-                findstoragedriver "/dev/$slavedev"
-                ;;
-        esac
-    done << EOF
-        $(dmsetup table -j $major -m $minor 2>/dev/null)
-EOF
-        local name=$(dmsetup info --noheadings -c -j $major -m $minor -o name)
-        local vg=$(lvshow "/dev/mapper/$name")
-        local raids=$(/sbin/dmraid -s -craidname 2>/dev/null | grep -vi "no raid disks") 
-        if [ -n "$vg" ]; then
-            vg=`echo $vg` # strip whitespace
-            case " $vg_list " in
-                *" $vg "*) ;;
-                *)  vg_list="$vg_list $vg"
-                    [ -z "$nolvm" ] && find_base_dm_mods
-                    ;;
-            esac
-        fi
-        for raid in $raids ; do
-            if [ "$raid" == "$name" ]; then
-                case " $DMRAIDS " in
-                    *" $raid "*) ;;
-                    *)  DMRAIDS="$DMRAIDS $raid"
-                        [ -z "$nodmraid" ] && find_base_dm_mods
-                        ;;
-                esac
-                break
-            fi
-        done
-}
-
-handleiscsi() {
-    vecho "Found iscsi component $1"
-
-    # We call iscsi_set_parameters once here to figure out what network to
-    # use (it sets tgt_ipaddr), and once again to emit iscsi values,
-    # not very efficient.
-    iscsi_set_parameters $1
-    iscsi_devs="$iscsi_devs $1"
-    netdev=$(/sbin/ip route get to $tgt_ipaddr | \
-        sed 's|.*dev \(.*\).*|\1|g' | awk '{ print $1; exit }')
-    addnetdev $netdev
-}
-
-handleraid() {
-    local start=0
-
-    if [ -n "$noraid" -o ! -f /proc/mdstat ]; then
-        return 0
-    fi
-
-    levels=$(awk "/^$1[  ]*:/ { print\$4 }" /proc/mdstat)
-
-    for level in $levels ; do
-        case $level in
-            linear)
-                start=1
-                ;;
-            multipath)
-                start=1
-                ;;
-            raid[01] | raid10)
-                start=1
-                ;;
-            raid[456])
-                start=1
-                ;;
-            *)
-                error "raid level $level (in /proc/mdstat) not recognized"
-                ;;
-        esac
-    done
-    if [ "$start" = 1 ]; then
-        raiddevices="$raiddevices $1"
-    fi
-    return $start
-}
-
-lvshow() {
-    lvm lvs --ignorelockingfailure --noheadings -o vg_name \
-        $1 2>/dev/null | egrep -v '^ *(WARNING:|Volume Groups with)'
-}
-
-vgdisplay() {
-    lvm vgdisplay --ignorelockingfailure -v $1 2>/dev/null |
-    sed -n 's/PV Name//p'
-}
-
-dmmods_found="n"
-find_base_dm_mods()
-{
-    [ "$dmmods_found" == "n" ] || return
-    dmmods_found="y"
-}
-
-savedargs=$*
-while [ $# -gt 0 ]; do
-    case $1 in
-        --fstab*)
-            if [ "$1" != "${1##--fstab=}" ]; then
-                fstab=${1##--fstab=}
-            else
-                fstab=$2
-                shift
-            fi
-            ;;
-
-
-        -v|--verbose)
-            set_verbose true
-            ;;
-        --net-dev*)
-            if [ "$1" != "${1##--net-dev=}" ]; then
-                net_list="$net_list ${1##--net-dev=}"
-            else
-                net_list="$net_list $2"
-                shift
-            fi
-            ;;
-        --rootdev*)
-            if [ "$1" != "${1##--rootdev=}" ]; then
-                rootdev="${1##--rootdev=}"
-            else
-                rootdev="$2"
-                shift
-            fi
-            ;;
-        --thawdev*)
-            if [ "$1" != "${1##--thawdev=}" ]; then
-                thawdev="${1##--thawdev=}"
-            else
-                thawdev="$2"
-                shift
-            fi
-            ;;
-        --rootfs*)
-            if [ "$1" != "${1##--rootfs=}" ]; then
-                rootfs="${1##--rootfs=}"
-            else
-                rootfs="$2"
-                shift
-            fi
-            ;;
-        --rootopts*)
-            if [ "$1" != "${1##--rootopts=}" ]; then
-                rootopts="${1##--rootopts=}"
-            else
-                rootopts="$2"
-                shift
-            fi
-            ;;
-        --root*)
-            if [ "$1" != "${1##--root=}" ]; then
-                root="${1##--root=}"
-            else
-                root="$2"
-                shift
-            fi
-            ;;
-        --loopdev*)
-            if [ "$1" != "${1##--loopdev=}" ]; then
-                loopdev="${1##--loopdev=}"
-            else
-                loopdev="$2"
-                shift
-            fi
-            ;;
-        --loopfs*)
-            if [ "$1" != "${1##--loopfs=}" ]; then
-                loopfs="${1##--loopfs=}"
-            else
-                loopfs="$2"
-                shift
-            fi
-            ;;
-        --loopopts*)
-            if [ "$1" != "${1##--loopopts=}" ]; then
-                loopopts="${1##--loopopts=}"
-            else
-                loopopts="$2"
-                shift
-            fi
-            ;;
-        --looppath*)
-            if [ "$1" != "${1##--looppath=}" ]; then
-                looppath="${1##--looppath=}"
-            else
-                looppath="$2"
-                shift
-            fi
-            ;;
-        --help)
-            usage -n
-            ;;
-        *)
-            if [ -z "$target" ]; then
-                target=$1
-            elif [ -z "$kernel" ]; then
-                kernel=$1
-            else
-                usage
-            fi
-            ;;
-    esac
-
-    shift
-done
-
-[ -z "$rootfs" ] && rootfs=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $3; }}' $fstab)
-[ -z "$rootopts" ] && rootopts=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $4; }}' $fstab)
-[ -z "$rootopts" ] && rootopts="defaults"
-
-
-[ -z "$rootdev" ] && rootdev=$(awk '/^[ \t]*[^#]/ { if ($2 == "/") { print $1; }}' $fstab)
-    # check if it's nfsroot
-physdev=""
-if [ "$rootfs" == "nfs" ]; then
-    if [ "x$net_list" == "x" ]; then
-        handlenfs $rootdev
-    fi
-else
-        # check if it's root by label
-    rdev=$rootdev
-    rdev=$(resolve_device_name "$rdev")
-    rootopts=$(echo $rootopts | sed -e 's/^r[ow],//' -e 's/,_netdev//' -e 's/_netdev//' -e 's/,_rnetdev//' -e 's/_rnetdev//' -e 's/,r[ow],$//' -e 's/,r[ow],/,/' -e 's/^r[ow]$/defaults/' -e 's/$/,ro/')
-    findstoragedriver "$rdev"
-fi
-
-    # find the first swap dev which would get used for swsusp
-[ -z "$thawdev" ] && thawdev=$(awk '/^[ \t]*[^#]/ { if ($3 == "swap") { print $1; exit }}' $fstab)
-swsuspdev="$thawdev"
-if [ -n "$swsuspdev" ]; then
-    swsuspdev=$(resolve_device_name "$swsuspdev")
-    findstoragedriver "$swsuspdev"
-fi
-
-
-cemit()
-{
-    cat 
-}
-
-emit()
-{
-    NONL=""
-    if [ "$1" == "-n" ]; then
-        NONL="-n"
-        shift
-    fi
-    echo $NONL "$@" 
-}
-
-emitdmraids()
-{
-    if [ -z "$nodmraid" -a -n "$DMRAIDS" ]; then
-        for raid in $DMRAIDS; do
-            echo -n "rd_DM_UUID=$raid "
-        done
-    fi
-}
-
-
-# HACK: module loading + device creation isn't necessarily synchronous...
-# this will make sure that we have all of our devices before trying
-# things like RAID or LVM
-emitdmraids
-
-emitcrypto()
-{
-    local luksuuid=$(grep "^$2 " /etc/crypttab 2>/dev/null| awk '{ print $2 }')
-    if [ -z "$luksuuid" ]; then
-        luksuuid="$2"
-    fi
-    luksuuid=${luksuuid##UUID=}
-    echo -n "rd_LUKS_UUID=$luksuuid "
-}
-
-if [ -n "$raiddevices" ]; then
-    for dev in $raiddevices; do
-        uid=$(udevadm info --query=env --name /dev/${dev}|grep MD_UUID)
-        uid=${uid##MD_UUID=}
-        [ -n "$uid" ] && echo -n "rd_MD_UUID=$uid "
-    done
-else
-    echo -n "rd_NO_MD "
-fi
-
-if [ -z "$nolvm" -a -n "$vg_list" ]; then    
-    for vg in $vg_list; do 
-        echo -n "rd_LVM_VG=$vg "
-    done
-else
-    echo -n "rd_NO_LVM "
-fi
-
-cryptdevs="$(echo ${!cryptoraid@} ${!cryptopart@} ${!cryptolv@})"
-
-if [ -z "$cryptdevs" ]; then
-    echo -n "rd_NO_LUKS "
-else
-    for cryptdev in ${!cryptoraid@} ${!cryptopart@} ${!cryptolv@} ; do
-        emitcrypto `eval echo '$'$cryptdev`
-    done
-fi
-
-# output local keyboard/18n settings
-[ -e /etc/sysconfig/keyboard ] && . /etc/sysconfig/keyboard
-[ -e /etc/sysconfig/i18n ] && . /etc/sysconfig/i18n
-
-for i in KEYTABLE SYSFONT SYSFONTACM UNIMAP LANG; do
-    val=$(eval echo \$$i)
-    [[ $val ]] && echo -n "$i=$val "
-done
-
-if [ -n "$KEYBOARDTYPE" -a "$KEYBOARDTYPE" != "pc" ]; then
-    echo -n "KEYBOARDTYPE=$KEYBOARDTYPE "
-fi
-
-if [ -n "$rootdev" ]; then
-    echo -n "root=$rootdev "
-fi
-
-echo

dracut-gencmdline.8.xml

@@ -1,46 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" []>
-<!-- lifted from troff+man by doclifter -->
-<refentry id='dracutgencmdline8'>
-<refmeta>
-<refentrytitle>DRACUT-GENCMDLINE</refentrytitle>
-<manvolnum>8</manvolnum>
-<refmiscinfo class='source'>June 2009</refmiscinfo>
-<refmiscinfo class='manual'>Linux</refmiscinfo>
-</refmeta>
-<refnamediv id='name'>
-<refname>dracut-gencmdline</refname>
-<refpurpose>generates kernel command line parameters for the dracut generated initramfs</refpurpose>
-</refnamediv>
-<!-- body begins here -->
-<refsynopsisdiv id='synopsis'>
-<cmdsynopsis>
-  <command>dracut-gencmdline</command>    
-    <sbr/>
-</cmdsynopsis>
-</refsynopsisdiv>
-
-
-<refsect1 id='description'><title>DESCRIPTION</title>
-<para><command>dracut-gencmdline</command>
-generates kernel command line parameters for the dracut generated initramfs, which are very specific to the host system.</para>
-
-</refsect1>
-
-<refsect1 id='authors'><title>AUTHORS</title>
-<literallayout remap='.nf'>
-Harald Hoyer &lt;harald@redhat.com&gt;
-</literallayout> <!-- .fi -->
-</refsect1>
-
-<refsect1 id='availability'><title>AVAILABILITY</title>
-<para>The dracut-gencmdline command is part of the dracut package and is available from
-<ulink url='http://sourceforge.net/apps/trac/dracut/wiki'>http://sourceforge.net/apps/trac/dracut/wiki</ulink></para>
-
-</refsect1>
-
-<refsect1 id='see_also'><title>SEE ALSO</title>
-<para><citerefentry><refentrytitle>dracut</refentrytitle><manvolnum>8</manvolnum></citerefentry></para>
-</refsect1>
-</refentry>
-

dracut-initramfs-restore.sh

@@ -0,0 +1,19 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+set -e
+cd /run/initramfs
+IMG="/boot/initramfs-$(uname -r).img"
+[ -f .need_shutdown -a -f "$IMG" ] || exit 1
+if zcat "$IMG"  | cpio -id >/dev/null 2>&1; then
+    rm .need_shutdown
+elif xzcat "$IMG"  | cpio -id >/dev/null 2>&1; then
+    rm .need_shutdown
+else
+    # something failed, so we clean up
+    rm -f /run/initramfs/shutdown
+    exit 1
+fi
+
+exit 0

dracut-logger.sh

@@ -106,19 +106,21 @@ __DRACUT_LOGGER__=1
 # @warning Function sets global variables @var maxloglvl and @syslogfacility.
 # See file doc comment for details.
 dlog_init() {
-    # Skip initialization if it's already done.
-    [ -n "$maxloglvl" ] && return 0
-
+    local __oldumask
     local ret=0; local errmsg
-
     [ -z "$stdloglvl" ] && stdloglvl=4
     [ -z "$sysloglvl" ] && sysloglvl=0
     [ -z "$kmsgloglvl" ] && kmsgloglvl=0
+    # Skip initialization if it's already done.
+    [ -n "$maxloglvl" ] && return 0
 
     if [ -z "$fileloglvl" ]; then
         [ -w "$logfile" ] && fileloglvl=4 || fileloglvl=0
     elif [ $fileloglvl -gt 0 ]; then
+        __oldumask=$(umask)
+        umask 0377
         ! [ -e "$logfile" ] && >"$logfile"
+        umask $__oldumask
         if [ -w "$logfile" -a -f "$logfile" ]; then
             # Mark new run in the log file
             echo >>"$logfile"
@@ -269,12 +271,8 @@ _dlvl2syslvl() {
 #   - @c INFO to @c info
 #   - @c DEBUG and @c TRACE both to @c debug
 _do_dlog() {
-    [ -z "$maxloglvl" ] && return 0
     local lvl="$1"; shift
     local lvlc=$(_lvl2char "$lvl") || return 0
-
-    [ $lvl -le $maxloglvl ] || return 0
-
     local msg="$lvlc: $*"
 
     [ $lvl -le $stdloglvl ] && echo "$msg" >&2
@@ -305,6 +303,9 @@ _do_dlog() {
 # dwarn "This is a warning"
 # echo "This is a warning" | dwarn
 dlog() {
+    [ -z "$maxloglvl" ] && return 0
+    [ $1 -le $maxloglvl ] || return 0
+
     if [ $# -gt 1 ]; then
         _do_dlog "$@"
     else
@@ -312,7 +313,6 @@ dlog() {
             _do_dlog "$1" "$line"
         done
     fi
-    [ -n "$debug" ] && set -x || :
 }
 
 ## @brief Logs message at TRACE level (6)
@@ -322,6 +322,7 @@ dlog() {
 dtrace() {
     set +x
     dlog 6 "$@"
+    [ -n "$debug" ] && set -x || :
 }
 
 ## @brief Logs message at DEBUG level (5)
@@ -331,6 +332,7 @@ dtrace() {
 ddebug() {
     set +x
     dlog 5 "$@"
+    [ -n "$debug" ] && set -x || :
 }
 
 ## @brief Logs message at INFO level (4)
@@ -340,6 +342,7 @@ ddebug() {
 dinfo() {
     set +x
     dlog 4 "$@"
+    [ -n "$debug" ] && set -x || :
 }
 
 ## @brief Logs message at WARN level (3)
@@ -349,6 +352,7 @@ dinfo() {
 dwarn() {
     set +x
     dlog 3 "$@"
+    [ -n "$debug" ] && set -x || :
 }
 
 ## @brief It's an alias to dwarn() function.
@@ -358,6 +362,7 @@ dwarn() {
 dwarning() {
     set +x
     dwarn "$@"
+    [ -n "$debug" ] && set -x || :
 }
 
 ## @brief Logs message at ERROR level (2)
@@ -367,6 +372,7 @@ dwarning() {
 derror() {
     set +x
     dlog 2 "$@"
+    [ -n "$debug" ] && set -x || :
 }
 
 ## @brief Logs message at FATAL level (1)
@@ -376,4 +382,5 @@ derror() {
 dfatal() {
     set +x
     dlog 1 "$@"
+    [ -n "$debug" ] && set -x || :
 }

dracut-shutdown.service

@@ -0,0 +1,19 @@
+#  This file is part of systemd.
+#
+#  systemd is free software; you can redistribute it and/or modify it
+#  under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+
+[Unit]
+Description=Restore /run/initramfs
+After=getty@tty1.service prefdm.service
+Before=reboot.service
+DefaultDependencies=no
+ConditionPathExists=/run/initramfs/.need_shutdown
+ConditionPathExists=!/run/initramfs/bin/sh
+
+[Service]
+ExecStart=/usr/lib/dracut/dracut-initramfs-restore
+Type=oneshot
+RemainAfterExit=yes

dracut-update-initramfs

@@ -1,560 +0,0 @@
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-STATEDIR=/var/lib/dracut
-BOOTDIR=/boot
-CONF=/etc/dracut.conf
-KPKGCONF=/etc/kernel-img.conf
-USETRIGGERS=true
-mode=""
-version=""
-
-set -e
-
-if        $USETRIGGERS                                         \
-    && [ x"$DPKG_MAINTSCRIPT_PACKAGE" != x ]                \
-    && [ $# = 1 ]                                           \
-    && [ x"$1" = x-u ]                                      \
-    && dpkg-trigger --check-supported 2>/dev/null
-then
-    if dpkg-trigger --no-await update-initramfs; then
-        echo "dracut-update-initramfs: deferring update (trigger activated)"
-        exit 0
-    fi
-fi
-
-usage()
-{
-    if [ -n "${1}" ]; then
-        printf "${@}\n\n" >&2
-    fi
-    cat >&2 << EOF
-Usage: ${0} [OPTION]...
-
-Options:
- -k [version]  Specify kernel version or 'all'
- -c            Create a new initramfs
- -u            Update an existing initramfs
- -d            Remove an existing initramfs
- -t            Take over a custom initramfs with this one
- -b            Set alternate boot directory
- -v            Be verbose
- -h            This message
-
-EOF
-    exit 1
-}
-
-# chroot check
-chrooted()
-{
-        # borrowed from udev's postinst
-    if [ "$(stat -c %d/%i /)" = "$(stat -Lc %d/%i /proc/1/root 2>/dev/null)" ]; then
-                # the devicenumber/inode pair of / is the same as that of
-                # /sbin/init's root, so we're *not* in a chroot and hence
-                # return false.
-        return 1
-    fi
-    return 0
-}
-
-mild_panic()
-{
-    if [ -n "${1}" ]; then
-        printf "${@}\n" >&2
-    fi
-    exit 0
-}
-
-panic()
-{
-    if [ -n "${1}" ]; then
-        printf "${@}\n" >&2
-    fi
-    exit 1
-}
-
-verbose()
-{
-    if [ "${verbose}" = 1 ]; then
-        printf "${@}\n"
-    fi
-}
-
-version_exists()
-{
-    [ -e "${STATEDIR}/${1}" ] && [ -e "${initramfs}" ]
-    return $?
-}
-
-set_initramfs()
-{
-    initramfs="${BOOTDIR}/dracut.img-${version}"
-}
-
-
-# backup initramfs while running
-backup_initramfs()
-{
-    [ ! -r "${initramfs}" ] && return 0
-    initramfs_bak="${initramfs}.dpkg-bak"
-    [ -r "${initramfs_bak}" ] && rm -f "${initramfs_bak}"
-    ln -f "${initramfs}" "${initramfs_bak}" \
-        || cp -a "${initramfs}" "${initramfs_bak}"
-    verbose "Keeping ${initramfs_bak}"
-}
-
-# keep booted initramfs
-backup_booted_initramfs()
-{
-    initramfs_bak="${initramfs}.dpkg-bak"
-
-       # first time run thus no backup
-    [ ! -r "${initramfs_bak}" ] && return 0
-
-       # chroot with no /proc
-    [ ! -r /proc/uptime ] && rm -f "${initramfs_bak}" && return 0
-
-       # no kept backup wanted
-    [ "${backup_initramfs}" = "no" ] && rm -f "${initramfs_bak}" && return 0
-
-       # no backup yet
-    if [ ! -r "${initramfs}.bak" ]; then
-        mv -f ${initramfs_bak} "${initramfs}.bak"
-        verbose "Backup ${initramfs}.bak"
-        return 0
-    fi
-
-       # keep booted initramfs
-    uptime_days=$(awk '{printf "%d", $1 / 3600 / 24}' /proc/uptime)
-    if [ -n "$uptime_days" ]; then
-        boot_initramfs=$(find "${initramfs}.bak" -mtime +${uptime_days})
-    fi
-    if [ -n "${boot_initramfs}" ]; then
-        mv -f "${initramfs_bak}" "${initramfs}.bak"
-        verbose "Backup ${initramfs}.bak"
-        return 0
-    fi
-    verbose "Removing current backup ${initramfs_bak}"
-    rm -f ${initramfs_bak}
-}
-
-# nuke generated copy
-remove_initramfs()
-{
-    [ -z "${initramfs_bak}" ] && return 0
-    rm -f "${initramfs_bak}"
-    verbose "Removing ${initramfs_bak}"
-}
-
-
-generate_initramfs()
-{
-    echo "dracut-update-initramfs: Generating ${initramfs}"
-    OPTS=""
-    if [ "${verbose}" = 1 ]; then
-        OPTS="-v ${OPTS}"
-    fi
-       ##WORK HERE!
-    if dracut ${OPTS} "${initramfs}.new" "${version}"; then
-        mv -f "${initramfs}.new" "${initramfs}"
-        set_sha1
-    else
-        mkinitramfs_return="$?"
-        remove_initramfs
-        rm -f "${initramfs}.new"
-        if [ "$mkinitramfs_return" = "2" ]; then
-                       # minversion wasn't met, exit 0
-            exit 0
-        fi
-        echo "update-initramfs: failed for ${initramfs}"
-        exit $mkinitramfs_return
-    fi
-}
-
-# lilo call
-run_lilo()
-{
-       # show lilo errors on failure
-    if ! lilo -t  > /dev/null 2>&1 ; then
-        echo "ERROR lilo fails for new ${initramfs}:"
-        echo
-        lilo -t
-    fi
-    lilo
-}
-
-# check if lilo is on mbr
-mbr_check()
-{
-       # try to discover grub|grub2 and be happy
-    [ -r /boot/grub/grub.cfg ] \
-        && groot=$(awk '/^set root=/{print substr($2, 7, 3); exit}' \
-        /boot/grub/grub.cfg)
-    [ -r /boot/grub/menu.lst ] \
-        && groot=$(awk '/^root/{print substr($2, 2, 3); exit}' \
-        /boot/grub/menu.lst)
-    [ -e /boot/grub/device.map ] && [ -n "${groot}" ] \
-        && dev=$(awk "/${groot}/{ print \$NF}" /boot/grub/device.map)
-    [ -n "${dev}" ] && [ -r ${dev} ] \
-        && dd if="${dev}" bs=512 skip=0 count=1 2> /dev/null \
-        | grep -q GRUB && return 0
-
-       # check out lilo.conf for validity
-    boot=$(awk -F = '/^boot=/{ print $2}' /etc/lilo.conf)
-    [ -z "${boot}" ] && return 0
-    case ${boot} in
-        /dev/md/*)
-            if [ -r /proc/mdstat ]; then
-                MD=${boot#/dev/md/}
-                boot="/dev/$(awk "/^md${MD}/{print substr(\$5, 1, 3)}" \
-                    /proc/mdstat)"
-            fi
-            ;;
-        /dev/md*)
-            if [ -r /proc/mdstat ]; then
-                MD=${boot#/dev/}
-                boot="/dev/$(awk "/^${MD}/{print substr(\$5, 1, 3)}" \
-                    /proc/mdstat)"
-            fi
-            ;;
-    esac
-    [ ! -r "${boot}" ] && return 0
-    dd if="${boot}" bs=512 skip=0 count=1 2> /dev/null | grep -q LILO \
-        && run_lilo && return 0
-
-       # no idea which bootloader is used
-    echo
-    echo "WARNING: grub and lilo installed."
-    echo "If you use grub as bootloader everything is fine."
-    echo "If you use lilo as bootloader you must run lilo!"
-    echo
-}
-
-# Invoke bootloader
-run_bootloader()
-{
-       # if both lilo and grub around, figure out if lilo needs to be run
-    if ( command -v update-grub >/dev/null 2>&1 \
-        || [ -e /boot/grub/menu.lst ] || [ -e /boot/grub/grub.cfg ] ) \
-        && ( [ -e /etc/lilo.conf ] && command -v lilo >/dev/null 2>&1 ); then
-        [ -r "${KPKGCONF}" ] && \
-            do_b=$(awk  '/^do_bootloader/{print $3}' "${KPKGCONF}")
-        if [ "${do_b}" = "yes" ] || [ "${do_b}" = "Yes" ] \
-            || [ "${do_b}" = "YES" ]; then
-            run_lilo
-            return 0
-        elif [ "${do_b}" = "no" ] || [ "${do_b}" = "No" ] \
-            || [ "${do_b}" = "NO" ]; then
-            return 0
-        fi
-
-               # do_bootloader unconfigured
-        mbr_check
-        return 0
-    fi
-    if [ -r /etc/lilo.conf ] && command -v lilo >/dev/null 2>&1; then
-        run_lilo
-        return 0
-    fi
-    if command -v elilo >/dev/null 2>&1; then
-        elilo
-        return 0
-    fi
-    if [ -r /etc/zipl.conf ]; then
-        zipl
-    fi
-    if flash-kernel --supported >/dev/null 2>&1; then
-        flash-kernel ${version}
-    fi
-}
-
-compare_sha1()
-{
-    sha1sum "${initramfs}" | diff "${STATEDIR}/${version}" - >/dev/null 2>&1
-    return $?
-}
-
-# Note that this must overwrite so that updates work.
-set_sha1()
-{
-    sha1sum "${initramfs}" > "${STATEDIR}/${version}"
-}
-
-delete_sha1()
-{
-    rm -f "${STATEDIR}/${version}"
-}
-
-# ro /boot is not modified
-ro_boot_check()
-{
-       # check irrelevant inside of a chroot
-    if [ ! -r /proc/mounts ] || chrooted; then
-        return 0
-    fi
-
-    boot_opts=$(awk '/boot/{if ((match($4, /^ro/) || match($4, /,ro/)) \
-        && $2 == "/boot") print "ro"}' /proc/mounts)
-    if [ -n "${boot_opts}" ]; then
-        echo "WARNING: /boot is ro mounted."
-        echo "update-initramfs: Not updating ${initramfs}"
-        exit 0
-    fi
-}
-
-get_sorted_versions()
-{
-    version_list=""
-
-    for gsv_x in "${STATEDIR}"/*; do
-        gsv_x="$(basename "${gsv_x}")"
-        if [ "${gsv_x}" = '*' ]; then
-            return 0
-        fi
-        worklist=""
-        for gsv_i in $version_list; do
-            if dpkg --compare-versions "${gsv_x}" '>' "${gsv_i}"; then
-                worklist="${worklist} ${gsv_x} ${gsv_i}"
-                gsv_x=""
-            else
-                worklist="${worklist} ${gsv_i}"
-            fi
-        done
-        if [ "${gsv_x}" != "" ]; then
-            worklist="${worklist} ${gsv_x}"
-        fi
-        version_list="${worklist}"
-    done
-
-    verbose "Available versions: ${version_list}"
-}
-
-set_current_version()
-{
-    if [ -f /boot/dracut.img-`uname -r` ]; then
-        version=`uname -r`
-    fi
-}
-
-set_linked_version()
-{
-    if [ -e /initrd.img ] && [ -L /initrd.img ]; then
-        linktarget="$(basename "$(readlink /initrd.img)")"
-    fi
-
-    if [ -e /boot/initrd.img ] && [ -L /boot/initrd.img ]; then
-        linktarget="$(basename "$(readlink /boot/initrd.img)")"
-    fi
-
-    if [ -z "${linktarget}" ]; then
-        return
-    fi
-
-    version="${linktarget##*img-}"
-}
-
-set_highest_version()
-{
-    get_sorted_versions
-    set -- ${version_list}
-    version=${1}
-}
-
-create()
-{
-    if [ -z "${version}" ]; then
-        usage "Create mode requires a version argument"
-    fi
-
-    set_initramfs
-
-    if [ "${takeover}" = 0 ]; then
-        if version_exists "${version}"; then
-            panic "Cannot create version ${version}: already exists"
-        fi
-
-        if [ -e "${initramfs}" ]; then
-            panic "${initramfs} already exists, cannot create."
-        fi
-    fi
-
-    generate_initramfs
-}
-
-update()
-{
-    if [ "${update_initramfs}" = "no" ]; then
-        echo "update-initramfs: Not updating initramfs."
-        exit 0
-    fi
-
-    if [ -z "${version}" ]; then
-        set_highest_version
-    fi
-
-    if [ -z "${version}" ]; then
-        set_linked_version
-    fi
-
-    if [ -z "${version}" ]; then
-        set_current_version
-    fi
-
-    if [ -z "${version}" ]; then
-        verbose "Nothing to do, exiting."
-        exit 0
-    fi
-
-    set_initramfs
-
-    ro_boot_check
-
-    altered_check
-
-    backup_initramfs
-
-    generate_initramfs
-
-    run_bootloader
-
-    backup_booted_initramfs
-}
-
-delete()
-{
-    if [ -z "${version}" ]; then
-        usage "Delete mode requires a version argument"
-    fi
-
-    set_initramfs
-
-    if [ ! -e "${initramfs}" ]; then
-        panic "Cannot delete ${initramfs}, doesn't exist."
-    fi
-
-    if ! version_exists "${version}"; then
-        panic "Cannot delete version ${version}: Not created by this utility."
-    fi
-
-    altered_check
-
-    echo "update-initramfs: Deleting ${initramfs}"
-
-    delete_sha1
-
-    rm -f "${initramfs}"
-}
-
-# Check for update mode on existing and modified initramfs
-altered_check()
-{
-       # No check on takeover
-    [ "${takeover}" = 1 ] && return 0
-    if [ ! -e "${initramfs}" ]; then
-        mild_panic "${initramfs} does not exist. Cannot update."
-    fi
-    if ! compare_sha1; then
-        echo "update-initramfs: ${initramfs} has been altered." >&2
-        mild_panic "update-initramfs: Cannot update. Override with -t option."
-    fi
-}
-
-# Defaults
-verbose=0
-yes=0
-# We default to takeover=1 in Ubuntu, but not Debian
-takeover=0
-
-##
-
-while getopts "k:cudyvtb:h?" flag; do
-    case "${flag}" in
-        k)
-            version="${OPTARG}"
-            ;;
-        c)
-            mode="c"
-            ;;
-        d)
-            mode="d"
-            ;;
-        u)
-            mode="u"
-            ;;
-        v)
-            verbose="1"
-            ;;
-        y)
-            yes="1"
-            ;;
-        t)
-            takeover="1"
-            ;;
-        b)
-            BOOTDIR="${OPTARG}"
-            if [ ! -d "${BOOTDIR}" ]; then
-                echo "Error: ${BOOTDIR} is not a directory."
-                exit 1
-            fi
-            ;;
-        h|?)
-            usage
-            ;;
-    esac
-done
-
-shift $((${OPTIND} - 1))
-
-if [ $# -ne 0 ]; then
-    echo "Invalid argument for option -k."
-    usage
-fi
-
-# Validate arguments
-if [ -z "${mode}" ]; then
-    usage "You must specify at least one of -c, -u, or -d."
-fi
-
-if [ "${version}" = "all" ] \
-    || ( [ "${update_initramfs}" = "all" ] && [ -z "${version}" ] ); then
-    : FIXME check for --yes, and if not ask are you sure
-    get_sorted_versions
-    if [ -z "${version_list}" ]; then
-        verbose "Nothing to do, exiting."
-        exit 0
-    fi
-
-    OPTS="-b ${BOOTDIR}"
-    if [ "${verbose}" = "1" ]; then
-        OPTS="${OPTS} -v"
-    fi
-    if [ "${takeover}" = "1" ]; then
-        OPTS="${OPTS} -t"
-    fi
-    if [ "${yes}" = "1" ]; then
-        OPTS="${OPTS} -y"
-    fi
-    for u_version in ${version_list}; do
-               # Don't stop if one version doesn't work.
-        set +e
-        verbose "Execute: ${0} -${mode} -k \"${u_version}\" ${OPTS}"
-        "${0}" -${mode} -k "${u_version}" ${OPTS}
-        set -e
-    done
-    exit 0
-fi
-
-
-case "${mode}" in
-    c)
-        create
-        ;;
-    d)
-        delete
-        ;;
-    u)
-        update
-        ;;
-esac

dracut.8.asc

@@ -0,0 +1,387 @@
+DRACUT(8)
+=========
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+dracut - low-level tool for generating an initramfs image
+
+SYNOPSIS
+--------
+*dracut* ['OPTION...'] [<image> [_<kernel version>_]]
+
+DESCRIPTION
+-----------
+dracut creates an initial image used by the kernel for preloading the block
+device modules (such as IDE, SCSI or RAID) which are needed to access the root
+filesystem, mounting the root filesystem and booting into the real system.
+
+At boot time, the kernel unpacks that archive into RAM disk, mounts and uses it
+as initial root file system. All finding of the root device happens in this
+early userspace.
+
+For a complete list of kernel command line options see *dracut.cmdline*(7)
+
+OPTIONS
+-------
+**-f, --force**::
+    overwrite existing initramfs file.
+
+**-m, --modules** _<list of dracut modules>_::
+    specify a space-separated list of dracut modules to call when building the
+    initramfs. Modules are located in _/usr/lib/dracut/modules.d_. This
+    parameter can be specified multiple times.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --modules "module1 module2"  ...
+----
+===============================
+
+**-o, --omit** _<list of dracut modules>_::
+    omit a space-separated list of dracut modules. This parameter can be
+    specified multiple times.
+
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --omit "module1 module2"  ...
+----
+===============================
+
+**-a, --add** _<list of dracut modules>_::
+    add a space-separated list of dracut modules to the default set of modules.
+    This parameter can be specified multiple times.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --add "module1 module2"  ...
+----
+===============================
+
+**--force-add** _<list of dracut modules>_::
+    force to add a space-separated list of dracut modules to the default set of
+    modules, when -H is specified. This parameter can be specified multiple
+    times.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --force-add "module1 module2"  ...
+----
+===============================
+
+**-d, --drivers** _<list of kernel modules>_::
+    specify a space-separated list of kernel modules to exclusively include
+    in the initramfs. The kernel modules have to be specified without the ".ko"
+    suffix. This parameter can be specified multiple times.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --drivers "kmodule1 kmodule2"  ...
+----
+===============================
+
+**--add-drivers** _<list of kernel modules>_::
+    specify a space-separated list of kernel modules to add to the initramfs.
+    The kernel modules have to be specified without the ".ko" suffix. This
+    parameter can be specified multiple times.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --add-drivers "kmodule1 kmodule2"  ...
+----
+===============================
+
+**--omit-drivers** _<list of kernel modules>_::
+    specify a space-separated list of kernel modules not to add to the
+    initramfs.
+    The kernel modules have to be specified without the ".ko" suffix. This
+    parameter can be specified multiple times.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --omit-drivers "kmodule1 kmodule2"  ...
+----
+===============================
+
+**--filesystems** _<list of filesystems>_::
+    specify a space-separated list of kernel filesystem modules to exclusively
+    include in the generic initramfs. This parameter can be specified multiple
+    times.
+
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --filesystems "filesystem1 filesystem2"  ...
+----
+===============================
+
+**-k, --kmoddir** _<kernel directory>_::
+    specify the directory, where to look for kernel modules
+
+**--fwdir** _<dir>[:<dir>...]++_::
+    specify additional directories, where to look for firmwares. This parameter
+    can be specified multiple times.
+
+**--kernel-only**::
+    only install kernel drivers and firmware files
+
+**--no-kernel**::
+    do not install kernel drivers and firmware files
+
+**--mdadmconf**::
+    include local _/etc/mdadm.conf_
+
+**--nomdadmconf**::
+    do not include local _/etc/mdadm.conf_
+
+**--lvmconf**::
+    include local _/etc/lvm/lvm.conf_
+
+**--nolvmconf**::
+    do not include local _/etc/lvm/lvm.conf_
+
+**--fscks** [LIST]::
+    add a space-separated list of fsck tools, in addition to _dracut.conf_'s
+    specification; the installation is opportunistic (non-existing tools are
+    ignored)
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --fscks "fsck.foo barfsck"  ...
+----
+===============================
+
+**--nofscks**::
+    inhibit installation of any fsck tools
+
+**--strip**::
+    strip binaries in the initramfs (default)
+
+**--nostrip**::
+    do not strip binaries in the initramfs
+
+**--prefix** _<dir>_::
+    prefix initramfs files with the specified directory
+
+**--noprefix**::
+    do not prefix initramfs files (default)
+
+**-h, --help**::
+    display help text and exit.
+
+**--debug**::
+    output debug information of the build process
+
+**-v, --verbose**::
+    increase verbosity level (default is info(4))
+
+**-q, --quiet**:: decrease verbosity level (default is info(4))
+
+**-c, --conf** _<dracut configuration file>_::
+    specify configuration file to use.
++
+Default:
+   _/etc/dracut.conf_
+
+**--confdir** _<configuration directory>_::
+    specify configuration directory to use.
++
+Default:
+   _/etc/dracut.conf.d_
+
+**--tmpdir** _<temporary directory>_::
+    specify temporary directory to use.
++
+Default:
+   _/var/tmp_
+
+**--sshkey** _<sshkey file>_:: ssh key file used with ssh-client module.
+
+**-l, --local**::
+    activates the local mode. dracut will use modules from the current working
+    directory instead of the system-wide installed modules in
+    _/usr/lib/dracut/modules.d_.
+    This is useful when running dracut from a git checkout.
+
+**-H, --hostonly**::
+    Host-Only mode: Install only what is needed for booting
+    the local host instead of a generic host.
++
+[WARNING]
+====
+If chrooted to another root other than the real root device, use "--fstab" and
+provide a valid _/etc/fstab_.
+====
+
+**--no-hostonly**::
+    Disable Host-Only mode
+
+**--fstab**::
+    Use _/etc/fstab_ instead of _/proc/self/mountinfo_.
+
+**--add-fstab** _<filename>_ ::
+    Add entries of _<filename>_ to the initramfs /etc/fstab.
+
+**--mount** "_<device>_ _<mountpoint>_ _<filesystem type>_ _<filesystem options>_"::
+    Mount _<device>_ on _<mountpoint>_ with _<filesystem type>_ and _<filesystem
+    options>_ in the initramfs
+
+**-i, --include** _<SOURCE>_ _<TARGET>_::
+    include the files in the SOURCE directory into the
+    TARGET directory in the final initramfs. If SOURCE is a file, it will be
+    installed to TARGET in the final initramfs. This parameter can be specified
+    multiple times.
+
+**-I, --install** _<file list>_::
+    install the space separated list of files into the initramfs.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
++
+----
+# dracut --install "/bin/foo /sbin/bar"  ...
+----
+===============================
+
+**--gzip**::
+    Compress the generated initramfs using gzip. This will be done by default,
+    unless another compression option or --no-compress is passed. Equivalent to
+    "--compress=gzip -9"
+
+**--bzip2**::
+    Compress the generated initramfs using bzip2.
++
+[WARNING]
+====
+Make sure your kernel has bzip2 decompression support compiled in, otherwise you
+will not be able to boot. Equivalent to "--compress=bzip2"
+====
+
+**--lzma**::
+    Compress the generated initramfs using lzma.
++
+[WARNING]
+====
+Make sure your kernel has lzma decompression support compiled in, otherwise you
+will not be able to boot. Equivalent to "--compress=lzma -9"
+====
+
+**--xz**::
+    Compress the generated initramfs using xz.
++
+[WARNING]
+====
+Make sure your kernel has xz decompression support compiled in, otherwise you
+will not be able to boot. Equivalent to "--compress=xz --check=crc32
+--lzma2=dict=1MiB"
+====
+
+**--compress** _<compressor>_::
+    Compress the generated initramfs using the passed compression program. If
+    you pass it just the name of a compression program, it will call that
+    program with known-working arguments. If you pass a quoted string with
+    arguments, it will be called with exactly those arguments. Depending on what
+    you pass, this may result in an initramfs that the kernel cannot decompress.
+
+**--no-compress**::
+    Do not compress the generated initramfs. This will override any other
+    compression options.
+
+**--list-modules**::
+    List all available dracut modules.
+
+**-M, --show-modules**::
+    Print included module's name to standard output during build.
+
+**--keep**::
+    Keep the initramfs temporary directory for debugging purposes.
+
+FILES
+-----
+_/var/log/dracut.log_::
+    logfile of initramfs image creation
+
+_/tmp/dracut.log_::
+    logfile of initramfs image creation, if _/var/log/dracut.log_ is not
+    writable
+
+_/etc/dracut.conf_::
+    see dracut.conf5
+
+_/etc/dracut.conf.d/*.conf_::
+    see dracut.conf5
+
+Configuration in the initramfs
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+_/etc/conf.d/_::
+    Any files found in _/etc/conf.d/_ will be sourced in the initramfs to
+    set initial values. Command line options will override these values
+    set in the configuration files.
+
+_/etc/cmdline_::
+    Can contain additional command line options.
+
+AVAILABILITY
+------------
+The dracut command is part of the dracut package and is available from
+link:$$https://dracut.wiki.kernel.org$$[https://dracut.wiki.kernel.org]
+
+AUTHORS
+-------
+*Harald Hoyer*::
+    Project Leader and Developer
+
+*Victor Lowther*::
+    Developer
+
+*Philippe Seewer*::
+    Developer
+
+*Warren Togami*::
+    Developer
+
+*Amadeusz Żołnowski*::
+    Developer
+
+*Jeremy Katz*::
+    Developer
+
+*David Dillow*::
+    Developer
+
+*Will Woods*::
+    Developer
+
+SEE ALSO
+--------
+*dracut.cmdline*(7) *dracut.conf*(5)

dracut.8.xml

@@ -1,525 +0,0 @@
-<?xml version='1.0' encoding='UTF-8'?>
-<!-- This document was created with Syntext Serna Free. --><!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" []>
-<refentry id="dracut8">
-  <refentryinfo>
-    <title>dracut</title>
-    <productname>dracut</productname>
-    <authorgroup>
-      <author>
-        <contrib>Project Leader, Developer</contrib>
-        <firstname>Harald</firstname>
-        <surname>Hoyer</surname>
-        <email>harald@redhat.com</email>
-      </author>
-      <author>
-        <contrib>Developer</contrib>
-        <firstname>Victor</firstname>
-        <surname>Lowther</surname>
-        <email>victor.lowther@gmail.com</email>
-      </author>
-      <author>
-        <contrib>Developer</contrib>
-        <firstname>Warren</firstname>
-        <surname>Togami</surname>
-        <email>wtogami@redhat.com</email>
-      </author>
-      <author>
-        <contrib>Developer</contrib>
-        <firstname>Jeremy</firstname>
-        <surname>Katz</surname>
-        <email>katzj@redhat.com</email>
-      </author>
-      <author>
-        <contrib>Developer</contrib>
-        <firstname>Philippe</firstname>
-        <surname>Seewer</surname>
-        <email>philippe.seewer@bfh.ch</email>
-      </author>
-      <author>
-        <contrib>Developer</contrib>
-        <firstname>David</firstname>
-        <surname>Dillow</surname>
-        <email>dave@thedillows.org</email>
-      </author>
-      <author>
-        <contrib>Developer</contrib>
-        <firstname>Amadeusz</firstname>
-        <surname>Żołnowski</surname>
-        <email>aidecoe@aidecoe.name</email>
-      </author>
-    </authorgroup>
-  </refentryinfo>
-  <refmeta>
-    <refentrytitle>dracut</refentrytitle>
-    <manvolnum>8</manvolnum>
-    <refmiscinfo class="version"/>
-  </refmeta>
-  <refnamediv>
-    <refname>dracut</refname>
-    <refpurpose>create initial ramdisk images for preloading modules</refpurpose>
-  </refnamediv>
-  <refsynopsisdiv>
-    <cmdsynopsis>
-      <command>dracut</command>
-      <arg choice="opt" rep="repeat">
-        <replaceable>OPTION</replaceable>
-      </arg>
-      <arg choice="opt">
-        <replaceable>&lt;image&gt;</replaceable>
-        <arg choice="opt">
-          <replaceable>&lt;kernel-version&gt;</replaceable>
-        </arg>
-      </arg>
-      <sbr/>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-  <refsect1>
-    <title>Description</title>
-    <para><command>dracut</command>
-creates an initial image used by the kernel for
-preloading the block device modules (such as IDE, SCSI or RAID)
-which are needed to access the root filesystem.</para>
-    <para>
-For a complete list of kernel command line options see
-      <citerefentry>
-        <refentrytitle>dracut.kernel</refentrytitle>
-        <manvolnum>7</manvolnum>
-      </citerefentry>
-</para>
-    <refsect2>
-      <title>Options</title>
-      <variablelist>
-        <varlistentry>
-          <term>
-            <option>-f</option>
-          </term>
-          <term>
-            <option>--force</option>
-          </term>
-          <listitem>
-            <para>overwrite existing initramfs file.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-m</option>
-          </term>
-          <term>
-            <option>--modules&nbsp;<replaceable>&lt;list of dracut modules&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>specify a space-separated list of dracut modules to call 
-when building the initramfs. 
-Modules are located in 
-<filename>/usr/share/dracut/modules.d</filename>. This parameter can be specified multiple times.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-o</option>
-          </term>
-          <term>
-            <option>--omit&nbsp;<replaceable>&lt;list of dracut modules&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>omit a space-separated list of dracut modules. This parameter can be specified multiple times.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-a</option>
-          </term>
-          <term>
-            <option>--add&nbsp;<replaceable>&lt;list of dracut modules&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>add a space-separated list of dracut modules to the default set of modules. This parameter can be specified multiple times.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-d</option>
-          </term>
-          <term>
-            <option>--drivers&nbsp;<replaceable>&lt;list of kernel modules&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>specify a space-separated list of kernel modules to exclusively include
-in the initramfs.
-The kernel modules have to be specified without the &quot;.ko&quot; suffix. This parameter can be specified multiple times.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--add-drivers&nbsp;<replaceable>&lt;list of kernel modules&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>specify a space-separated list of kernel modules to add to the initramfs.
-The kernel modules have to be specified without the &quot;.ko&quot; suffix. This parameter can be specified multiple times.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--filesystems&nbsp;<replaceable>&lt;list of filesystems&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>specify a space-separated list of kernel filesystem modules to exclusively 
-include in the generic initramfs. This parameter can be specified multiple times.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-k</option>
-          </term>
-          <term>
-            <option>--kmoddir&nbsp;<replaceable>&lt;kernel directory&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>specify the directory, where to look for kernel modules</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option> --fwdir&nbsp;<replaceable>&lt;dir&gt;[:&lt;dir&gt;...]</replaceable></option>
-          </term>
-          <listitem>
-            <para>specify additional directories, where to look for firmwares. This parameter can be specified multiple times.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--kernel-only</option>
-          </term>
-          <listitem>
-            <para>only install kernel drivers and firmware files</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--no-kernel</option>
-          </term>
-          <listitem>
-            <para>do not install kernel drivers and firmware files</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--mdadmconf</option>
-          </term>
-          <listitem>
-            <para>include local <filename>/etc/mdadm.conf</filename></para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--nomdadmconf</option>
-          </term>
-          <listitem>
-            <para>do not include local <filename>/etc/mdadm.conf</filename></para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--strip</option>
-          </term>
-          <listitem>
-            <para>strip binaries in the initramfs (default)</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--nostrip</option>
-          </term>
-          <listitem>
-            <para>do not strip binaries in the initramfs</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-h</option>
-          </term>
-          <term>
-            <option>--help</option>
-          </term>
-          <listitem>
-            <para>display help text and exit.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--debug</option>
-          </term>
-          <listitem>
-            <para>output debug information of the build process</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-v</option>
-          </term>
-          <term>
-            <option>--verbose</option>
-          </term>
-          <listitem>
-            <para>increase verbosity level (default is info(4))</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-q</option>
-          </term>
-          <term>
-            <option>--quiet</option>
-          </term>
-          <listitem>
-            <para>decrease verbosity level (default is info(4))</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-c</option>
-          </term>
-          <term>
-            <option>--conf&nbsp;<replaceable>&lt;dracut configuration file&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>specify configuration file to use.
-Default: 
-<filename>/etc/dracut.conf</filename></para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--confdir&nbsp;<replaceable>&lt;configuration directory&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>specify configuration directory to use.
-Default: 
-<filename>/etc/dracut.conf.d</filename></para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-l</option>
-          </term>
-          <term>
-            <option>--local</option>
-          </term>
-          <listitem>
-            <para>activates the local mode. dracut will use modules from the current working
-directory instead of the system-wide installed modules in
-<filename>/usr/share/dracut/modules.d</filename>.
-This is useful when running dracut from a git checkout.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-H</option>
-          </term>
-          <term>
-            <option>--hostonly</option>
-          </term>
-          <listitem>
-            <para>Host-Only mode: Install only what is needed for booting 
-the local host instead of a generic host. 
-     <warning>
-                <para>If chrooted to another root other than the real root device, use &quot;--fstab&quot; and provide a valid <filename>/etc/fstab</filename>.</para>
-              </warning></para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--fstab</option>
-          </term>
-          <listitem>
-            <para>Use <filename>/etc/fstab</filename> instead of <filename>/proc/self/mountinfo</filename>.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-i</option>
-          </term>
-          <term>
-            <option>--include&nbsp;<replaceable>&lt;SOURCE&gt;</replaceable>&nbsp;<replaceable>&lt;TARGET&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>include the files in the SOURCE directory into the
-TARGET directory in the final initramfs. If SOURCE is a file, it will be installed to TARGET in the final initramfs. This parameter can be specified multiple times.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-I</option>
-          </term>
-          <term>
-            <option>--install&nbsp;<replaceable>&lt;file list&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>install the space separated list of files into the initramfs.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--gzip</option>
-          </term>
-          <listitem>
-            <para>Compress the generated initramfs using gzip.
-     This will be done by default, unless another compression option or --no-compress is passed. Equivalent to "--compress=gzip -9"</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--bzip2</option>
-          </term>
-          <listitem>
-            <para>Compress the generated initramfs using bzip2.
-     <warning>
-                <para>Make sure your kernel has bzip2 decompression support compiled in, otherwise you will not be able to boot. Equivalent to "--compress=bzip2"</para>
-              </warning></para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--lzma</option>
-          </term>
-          <listitem>
-            <para>Compress the generated initramfs using lzma.
-     <warning>
-                <para>Make sure your kernel has lzma decompression support compiled in, otherwise you will not be able to boot. Equivalent to "--compress=lzma -9"</para>
-              </warning></para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--xz</option>
-          </term>
-          <listitem>
-            <para>Compress the generated initramfs using xz.
-     <warning>
-                <para>Make sure your kernel has xz decompression support compiled in, otherwise you will not be able to boot. Equivalent to "--compress=xz --check=crc32 --lzma2=dict=1MiB"</para>
-              </warning></para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--compress&nbsp;<replaceable>&lt;compressor&gt;</replaceable></option>
-          </term>
-          <listitem>
-            <para>Compress the generated initramfs using the passed compression program.  If you pass it just the name of a compression program, it will call that program with known-working arguments.  If you pass a quoted string with arguments, it will be called with exactly those arguments.  Depending on what you pass, this may result in an initramfs that the kernel cannot decompress.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--no-compress</option>
-          </term>
-          <listitem>
-            <para>Do not compress the generated initramfs. This will override any other compression options.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>--list-modules</option>
-          </term>
-          <listitem>
-            <para>List all available dracut modules.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <option>-M</option>
-          </term>
-          <term>
-            <option>--show-modules</option>
-          </term>
-          <listitem>
-            <para>Print included module's name to standard output during build.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-  </refsect1>
-  <refsect1>
-    <title>Files</title>
-    <variablelist>
-      <varlistentry>
-        <term>
-          <filename>/var/log/dracut.log</filename>
-        </term>
-        <listitem>
-          <para>logfile of initramfs image creation</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <filename>/tmp/dracut.log</filename>
-        </term>
-        <listitem>
-          <para>logfile of initramfs image creation, if <filename>/var/log/dracut.log</filename> is not writable</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <filename>/etc/dracut.conf</filename>
-        </term>
-        <listitem>
-          <para>see <citerefentry>
-              <refentrytitle>dracut.conf</refentrytitle>
-              <manvolnum>5</manvolnum>
-            </citerefentry></para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <filename>/etc/dracut.conf.d/*.conf</filename>
-        </term>
-        <listitem>
-          <para>see <citerefentry>
-              <refentrytitle>dracut.conf</refentrytitle>
-              <manvolnum>5</manvolnum>
-            </citerefentry></para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-    <refsect2>
-      <title>Configuration in the Initramfs</title>
-      <variablelist>
-        <varlistentry>
-          <term>
-            <filename>/etc/conf.d/</filename>
-          </term>
-          <listitem>
-            <para>Any files found in <filename>/etc/conf.d/</filename> will be sourced in the initramfs to
-set initial values. Command line options will override these values 
-set in the configuration files.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term>
-            <filename>/etc/cmdline</filename>
-          </term>
-          <listitem>
-            <para>Can contain additional command line options.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-  </refsect1>
-  <refsect1>
-    <title>Availability</title>
-    <para>The dracut command is part of the dracut package and is available from
-<ulink url="http://sourceforge.net/apps/trac/dracut/wiki">http://sourceforge.net/apps/trac/dracut/wiki</ulink></para>
-  </refsect1>
-  <refsect1>
-    <title>See Also</title>
-    <para>
-      <citerefentry>
-        <refentrytitle>dracut.kernel</refentrytitle>
-        <manvolnum>7</manvolnum>
-      </citerefentry>
-      <citerefentry>
-        <refentrytitle>dracut.conf</refentrytitle>
-        <manvolnum>5</manvolnum>
-      </citerefentry>
-    </para>
-  </refsect1>
-</refentry>

dracut.cmdline.7.asc

@@ -0,0 +1,653 @@
+DRACUT.CMDLINE(7)
+=================
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+dracut.cmdline - dracut kernel command line options
+
+DESCRIPTION
+-----------
+The root device used by the kernel is specified in the boot configuration
+file on the kernel command line, as always.
+
+The traditional _root=/dev/sda1_ style device specification is allowed, but not
+encouraged. The root device should better be identified by LABEL or UUID. If a
+label is used, as in _root=LABEL=<label_of_root>_ the initramfs will search all
+available devices for a filesystem with the appropriate label, and mount that
+device as the root filesystem. _root=UUID=<uuidnumber>_ will mount the partition
+with that UUID as the root filesystem.
+
+In the following all kernel command line parameters, which are processed by
+dracut, are described.
+
+"rd.*" parameters mentioned without "=" are boolean parameters. They can be
+turned on/off by setting them to {0|1}. If the assignment with "=" is missing
+"=1" is implied. For example _rd.info_ can be turned off with _rd.info=0_ or
+turned on with _rd.info=1_ or _rd.info_. The last value in the kernel command
+line is the value, which is honored.
+
+Standard
+~~~~~~~~
+**init=**_<path to real init>_::
+    specify the path to the init programm to be started after the initramfs has
+    finished
+
+**root=**_<path to blockdevice>_::
+    specify the block device to use as the root filesystem.
++
+E.g.:
++
+----
+root=/dev/sda1
+root=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1
+root=/dev/disk/by-label/Root
+root=LABEL=Root
+root=/dev/disk/by-uuid/3f5ad593-4546-4a94-a374-bcfb68aa11f7
+root=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
+----
+
+**rootfstype=**_<filesystem type>_:: "auto" if not specified, e.g.:
++
+----
+rootfstype=ext3
+----
+
+**rootflags=**_<mount options>_::
+    specify additional mount options for the root filesystem. If not set,
+    _/etc/fstab_ of the real root will be parsed for special mount options and
+    mounted accordingly.
+
+**rd.fstab=0**::
+    do not honor special mount options for the root filesystem found in
+    _/etc/fstab_ of the real root.
+
+**resume=**_<path to resume partition>_
++
+E.g.:
++
+----
+resume=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1
+resume=/dev/disk/by-uuid/3f5ad593-4546-4a94-a374-bcfb68aa11f7
+resume=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
+----
+
+
+Misc
+~~~~
+**rd.driver.blacklist=**_<drivername>[,<drivername>,...]_::
+    do not load kernel module <drivername>. This parameter can be specified
+    multiple times.
+
+**rd.driver.pre=**_<drivername>[,<drivername>,...]_::
+    force loading kernel module <drivername>. This parameter can be specified
+    multiple times.
+
+**rd.driver.post=**_<drivername>[,<drivername>,...]_::
+    force loading kernel module <drivername> after all automatic loading modules
+    have been loaded. This parameter can be specified multiple times.
+
+[[dracutkerneldebug]]
+Debug
+~~~~~
+**rd.info**::
+    print informational output though "quiet" is set
+
+**rd.shell**::
+    allow dropping to a shell, if root mounting fails
+
+**rd.debug**::
+    set -x for the dracut shell and logs to dmesg, console and
+    _/run/initramfs/init.log_
+
+**rd.break**::
+    drop to a shell at the end
+
+**rd.break=**_{cmdline|pre-udev|pre-trigger|initqueue|pre-mount|mount|pre-pivot|cleanup}_::
+    drop to a shell on defined breakpoint
+
+**rd.udev.info**::
+    set udev to loglevel info
+
+**rd.udev.debug**::
+    set udev to loglevel debug
+
+I18N
+~~~~
+**vconsole.keymap=**_<keymap base file name>_::
+    keyboard translation table loaded by loadkeys; taken from keymaps directory;
+    will be written as KEYMAP to _/etc/vconsole.conf_ in the initramfs, e.g.:
++
+----
+vconsole.keymap=de-latin1-nodeadkeys
+----
+
+**vconsole.keymap.ext=**_<list of keymap base file names>_::
+    list of extra keymaps to bo loaded (sep. by space); will be written as
+    EXT_KEYMAP to _/etc/vconsole.conf_ in the initramfs
+
+**vconsole.unicode**[=_{0|1}_]::
+    boolean, indicating UTF-8 mode; will be written as UNICODE to
+    _/etc/vconsole.conf_ in the initramfs
+
+**vconsole.font=**_<font base file name>_::
+    console font; taken from consolefonts directory; will be written as FONT to
+    _/etc/vconsole.conf_ in the initramfs; e.g.:
++
+----
+vconsole.font=LatArCyrHeb-16
+----
+
+**vconsole.font.map=**_<console map base file name>_::
+    see description of '-m' parameter in setfont manual; taken from consoletrans
+    directory; will be written as FONT_MAP to _/etc/vconsole.conf_ in the
+    initramfs
+
+**vconsole.font.unimap=**_<unicode table base file name>_::
+    see description of '-u' parameter in setfont manual; taken from unimaps
+    directory; will be written as FONT_UNIMAP to _/etc/vconsole.conf_ in the
+    initramfs
+
+**locale.LANG=**_<locale>_::
+    taken from the environment; if no UNICODE is defined we set its value in
+    basis of LANG value (whether it ends with ".utf8" (or similar) or not); will
+    be written as LANG to _/etc/locale.conf_ in the initramfs; e.g.:
++
+----
+locale.LANG=pl_PL.utf8
+----
+
+**locale.LC_ALL=**_<locale>_::
+    taken from the environment; will be written as LC_ALL to _/etc/locale.conf_
+    in the initramfs
+
+LVM
+~~~
+**rd.lvm=0**::
+    disable LVM detection
+
+**rd.lvm.vg=**_<volume group name>_::
+    only activate the volume groups with the given name. rd.lvm.vg can be
+    specified multiple times on the kernel command line.
+
+**rd.lvm.lv=**_<logical volume name>_::
+    only activate the logical volumes with the given name. rd.lvm.lv can be
+    specified multiple times on the kernel command line.
+
+**rd.lvm.conf=0**::
+    remove any _/etc/lvm/lvm.conf_, which may exist in the initramfs
+
+crypto LUKS
+~~~~~~~~~~~
+**rd.luks=0**::
+    disable crypto LUKS detection
+
+**rd.luks.uuid=**_<luks uuid>_::
+    only activate the LUKS partitions with the given UUID. Any "luks-" of the
+    LUKS UUID is removed before comparing to _<luks uuid>_.
+    The comparisons also matches, if _<luks uuid>_ is only the beginning of the
+    LUKS UUID, so you don't have to specify the full UUID.
+    This parameter can be specified multiple times.
+
+**rd.luks.allow-discards=**_<luks uuid>_::
+    Allow  using  of discards (TRIM) requests for LUKS partitions with the given UUID.
+    Any "luks-" of the LUKS UUID is removed before comparing to _<luks uuid>_.
+    The comparisons also matches, if _<luks uuid>_ is only the beginning of the
+    LUKS UUID, so you don't have to specify the full UUID.
+    This parameter can be specified multiple times.
+
+**rd.luks.allow-discards::
+    Allow  using  of discards (TRIM) requests on all LUKS partitions.
+
+**rd.luks.crypttab=0**::
+    do not check, if LUKS partition is in _/etc/crypttab_
+
+crypto LUKS - key on removable device support
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+**rd.luks.key=**_<keypath>:<keydev>:<luksdev>_::
+    _keypath_ is a path to key file to look for. It's REQUIRED. When _keypath_ ends with '.gpg' it's considered to be key encrypted symmetrically with GPG. You will be prompted for password on boot. GPG support comes with 'crypt-gpg' module which needs to be added explicitly.
++
+_keydev_ is a device on which key file resides. It might be kernel name of devices (should start with "/dev/"), UUID (prefixed with "UUID=") or label (prefix with "LABEL="). You don't have to specify full UUID. Just its beginning will suffice, even if its ambiguous. All matching devices will be probed. This parameter is recommended, but not required. If not present, all block devices will be probed, which may significantly increase boot time.
++
+If _luksdev_ is given, the specified key will only be applied for that LUKS device. Possible values are the same as for _keydev_. Unless you have several LUKS devices, you don't have to specify this parameter. The simplest usage is:
++
+----
+rd.luks.key=/foo/bar.key
+----
++
+As you see, you can skip colons in such a case.
+
+MD RAID
+~~~~~~~
+**rd.md=0**::
+    disable MD RAID detection
+
+**rd.md.imsm=0**::
+    disable MD RAID for imsm/isw raids, use DM RAID instead
+
+**rd.md.ddf=0**::
+    disable MD RAID for SNIA ddf raids, use DM RAID instead
+
+**rd.md.conf=0**::
+    ignore mdadm.conf included in initramfs
+
+**rd.md.waitclean=1**::
+    wait for any resync, recovery, or reshape activity to finish before continuing
+
+**rd.md.uuid=**_<md raid uuid>_::
+    only activate the raid sets with the given UUID. This parameter can be
+    specified multiple times.
+
+DM RAID
+~~~~~~~
+**rd.dm=0**::
+    disable DM RAID detection
+
+**rd.dm.uuid=**_<dm raid uuid>_::
+   only activate the raid sets with the given UUID. This parameter can be
+   specified multiple times.
+
+FIPS
+~~~~
+**rd.fips**::
+    enable FIPS
+
+**boot=**_<boot device>_::
+    specify the device, where /boot is located. e.g.
++
+----
+boot=/dev/sda1
+boot=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1
+boot=UUID=<uuid>
+boot=LABEL=<label>
+----
+
+**rd.fips.skipkernel**::
+    skip checksum check of the kernel image. Useful, if the kernel image is not
+    in a separate boot partition.
+
+Network
+~~~~~~~
+**ip=**_{dhcp|on|any|dhcp6|auto6|ibft}_::
+    dhcp|on|any::: get ip from dhcp server from all interfaces. If root=dhcp, loop
+    sequentially through all interfaces (eth0, eth1, ...) and use the first with
+    a valid DHCP root-path.
+
+    auto6::: IPv6 autoconfiguration
+
+    dhcp6::: IPv6 DHCP
+
+    ibft::: iBFT autoconfiguration
+
+**ip=**_<interface>_:_{dhcp|on|any|dhcp6|auto6}_[:[_<mtu>_][:_<macaddr>_]]::
+    This parameter can be specified multiple times.
++
+dhcp|on|any|dhcp6::: get ip from dhcp server on a specific interface
+auto6::: do IPv6 autoconfiguration
+<macaddr>::: optionally set <macaddr> on the <interface>
+
+**ip=**_<client-IP>_:_<server-IP>_:_<gateway-IP>_:_<netmask>_:_<client_hostname>_:_<interface>_:_{none|off|dhcp|on|any|dhcp6|auto6|ibft}_[:[_<mtu>_][:_<macaddr>_]]::
+    explicit network configuration. If you want do define a IPv6 address, put it
+    in brackets (e.g. [2001:DB8::1]). This parameter can be specified multiple
+    times.
++
+<macaddr>::: optionally set <macaddr> on the <interface>
+
+**ifname=**_<interface>_:_<MAC>_::
+    Assign network device name <interface> (ie eth0) to the NIC with MAC <MAC>.
+    Note: If you use this option you _must_ specify an ifname= argument for all
+    interfaces used in ip= or fcoe= arguments. However, if the interface in
+    ip= or fcoe= is a bridge, bonding or vlan interface, you should specify
+    an ifname= for _each_ of its underlying interfaces. This parameter can be
+    specified multiple times.
+
+**bootdev=**_<interface>_::
+    specify network interface to use routing and netroot information from.
+    Required if multiple ip= lines are used.
+
+**nameserver=**__<IP>__ [**nameserver=**__<IP>__ ...]::
+    specify nameserver(s) to use
+
+**biosdevname=0**::
+    boolean, turn off biosdevname network interface renaming
+
+**vlan=_<vlanname>_:_<phydevice>_**::
+    Setup vlan device named <vlanname> on <phydeivce>.
+    We support the four styles of vlan names: VLAN_PLUS_VID (vlan0005), VLAN_PLUS_VID_NO_PAD (vlan5),
+    DEV_PLUS_VID (eth0.0005), DEV_PLUS_VID_NO_PAD (eth0.5)
+
+**bond=_<bondname>_[:_<bondslaves>_:[:_<options>_]]**::
+    Setup bonding device <bondname> on top of <bondslaves>.
+    <bondslaves> is a comma-separated list of physical (ethernet) interfaces.
+    <options> is a comma-separated list on bonding options (modinfo bonding for details)
+    in format compatible with initscripts. If <options> includes multi-valued arp_ip_target option,
+    then its values should be separated by semicolon.
+    Bond without parameters assumes bond=bond0:eth0,eth1:mode=balance-rr
+
+**bridge=_<bridgename>_:_<ethnames>_**::
+    Setup bridge <bridgename> with <ethnames>. <ethnames> is a comma-separated
+    list of physical (ethernet) interfaces. Bridge without parameters assumes bridge=br0:eth0
+
+
+NFS
+~~~
+**root=**[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_]::
+    mount nfs share from <server-ip>:/<root-dir>, if no server-ip is given, use
+    dhcp next_server. if server-ip is an IPv6 address it has to be put in
+    brackets, e.g. [2001:DB8::1]. NFS options can be appended with the prefix
+    ":" or "," and are seperated by ",".
+
+**root=**nfs:[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_], **root=**nfs4:[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_], **root=**_{dhcp|dhcp6}_::
+    root=dhcp alone directs initrd to look at the DHCP root-path where NFS
+    options can be specified.
++
+----
+    root-path=<server-ip>:<root-dir>[,<nfs-options>]
+    root-path=nfs:<server-ip>:<root-dir>[,<nfs-options>]
+    root-path=nfs4:<server-ip>:<root-dir>[,<nfs-options>]
+----
+
+**root=**_/dev/nfs_ nfsroot=[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_]::
+    _Deprecated!_ kernel Documentation_/filesystems/nfsroot.txt_ defines this
+    method. This is supported by dracut, but not recommended.
+
+**rd.nfs.domain=**_<NFSv4 domain name>_::
+    Set the NFSv4 domain name. Will overwrite the settings in _/etc/idmap.conf_.
+
+iSCSI
+~~~~~
+**root=**iscsi:[_<username>_:_<password>_[:_<reverse>_:_<password>_]@][_<servername>_]:[_<protocol>_]:[_<port>_][:[_<iscsi_iface_name>_]:[_<netdev_name>_]]:[_<LUN>_]:_<targetname>_::
+    protocol defaults to "6", LUN defaults to "0". If the "servername" field is
+    provided by BOOTP or DHCP, then that field is used in conjunction with other
+    associated fields to contact the boot server in the Boot stage. However, if
+    the "servername" field is not provided, then the "targetname" field is then
+    used in the Discovery Service stage in conjunction with other associated
+    fields. See
+    link:$$http://tools.ietf.org/html/rfc4173#section-5$$[rfc4173].
+    e.g.:
++
+----
+root=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0
+----
++
+If servername is an IPv6 address, it has to be put in brackets. e.g.:
++
+----
+root=iscsi:[2001:DB8::1]::::iqn.2009-06.dracut:target0
+----
+
+**root=**_???_ **netroot=**iscsi:[_<username>_:_<password>_[:_<reverse>_:_<password>_]@][_<servername>_]:[_<protocol>_]:[_<port>_][:[_<iscsi_iface_name>_]:[_<netdev_name>_]]:[_<LUN>_]:_<targetname>_ ...::
+    multiple netroot options allow setting up multiple iscsi disks. e.g.:
++
+----
+root=UUID=12424547
+netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0
+netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target1
+----
++
+If servername is an IPv6 address, it has to be put in brackets. e.g.:
++
+----
+netroot=iscsi:[2001:DB8::1]::::iqn.2009-06.dracut:target0
+----
+
+**root=**_???_ **rd.iscsi.initiator=**_<initiator>_ **rd.iscsi.target.name=**_<target name>_  **rd.iscsi.target.ip=**_<target ip>_ **rd.iscsi.target.port=**_<target port>_ **rd.iscsi.target.group=**_<target group>_ **rd.iscsi.username=**_<username>_ **rd.iscsi.password=**_<password>_ **rd.iscsi.in.username=**_<in username>_ **rd.iscsi.in.password=**_<in password>_::
+    manually specify all iscsistart parameter (see **+iscsistart --help+**)
+
+**root=**_???_ **netroot=**iscsi **rd.iscsi.firmware=1**::
+ will read the iscsi parameter from the BIOS firmware
+
+**rd.iscsi.param=**_<param>_::
+    <param> will be passed as "--param <param>" to iscsistart.
+    This parameter can be specified multiple times.
+    e.g.:
++
+----
+"netroot=iscsi iscsi_firmware rd.iscsi.param=node.session.timeo.replacement_timeout=30"
+----
++
+will result in
++
+----
+iscsistart -b --param node.session.timeo.replacement_timeout=30
+----
+
+FCoE
+~~~~
+**fcoe=**_<edd|interface|MAC>_:_{dcb|nodcb}_::
+    Try to connect to a FCoE SAN through the NIC specified by _<interface>_ or
+    _<MAC>_ or EDD settings. For the second argument, currently only nodcb is
+    supported. This parameter can be specified multiple times. Note: letters in
+    the MAC-address must be lowercase!
+
+NBD
+~~~
+**root=**??? **netroot=**nbd:_<server>_:_<port>_[:_<fstype>_[:_<mountopts>_[:_<nbdopts>_]]]::
+    mount nbd share from <server>
+
+**root=dhcp** with **dhcp** **root-path=**nbd:_<server>_:_<port>_[:_<fstype>_[:_<mountopts>_[:_<nbdopts>_]]]::
+    root=dhcp alone directs initrd to look at the DHCP root-path where NBD
+    options can be specified. This syntax is only usable in cases where you are
+    directly mounting the volume as the rootfs.
+
+DASD
+~~~~
+**rd.dasd_mod.dasd=**....::
+    same syntax as the kernel module parameter (s390 only)
+
+**rd.dasd=**_<dasd_adaptor device bus ID>_[,readonly=_X_][,use_diag=_X_][,erplog=_X_]::
+    activate DASD device with the given adaptor device bus ID and setting the
+    sysfs attributes to the specified values. This parameter can be specified
+    multiple times.
+
+ZFCP
+~~~~
+**rd.zfcp=**_<zfcp adaptor device bus ID>_,_<WWPN>_,_<FCPLUN>_::
+    rd.zfcp can be specified multiple times on the kernel command line. e.g.: 
++
+----
+rd.zfcp=0.0.4000,0x5005076300C213e9,0x5022000000000000
+----
+
+**rd.zfcp.conf=0**::
+    ignore zfcp.conf included in the initramfs
+
+ZNET
+~~~~
+**rd.znet=**_<nettype>_,_<subchannels>_,_<options>_::
+    rd.znet can be specified multiple times on the kernel command line. e.g.: 
++
+----
+rd.znet=qeth,0.0.0600,0.0.0601,0.0.0602,layer2=1,portname=foo
+rd.znet=ctc,0.0.0600,0.0.0601,0.0.0602,protocol=bar
+----
+
+Plymouth Boot Splash
+~~~~~~~~~~~~~~~~~~~~
+**plymouth.enable=0**::
+    disable the plymouth bootsplash completly.
+
+**rd.plymouth=0**::
+    disable the plymouth bootsplash only for the initramfs.
+
+Kernel keys
+~~~~~~~~~~~
+**masterkey=**_<kernel master key path name>_::
+    Set the path name of the kernel master key. e.g.: 
++
+----
+masterkey=/etc/keys/kmk-trusted.blob
+----
+
+**masterkeytype=**_<kernel master key type>_::
+    Set the type of the kernel master key. e.g.: 
++
+----
+masterkeytype=trusted
+----
+
+**evmkey=**_<EVM key path name>_::
+    Set the path name of the EVM key. e.g.: 
++
+----
+evmkey=/etc/keys/evm-trusted.blob
+----
+
+**ecryptfskey=**_<eCryptfs key path name>_::
+    Set the path name of the eCryptfs key. e.g.: 
++
+----
+ecryptfskey=/etc/keys/ecryptfs-trusted.blob
+----
+
+Deprecated, renamed Options
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Here is a list of options, which were used in dracut prior to version 008, and their new replacement.
+
+rdbreak:: rd.break
+
+rd_CCW:: rd.ccw
+
+rd_DASD_MOD:: rd.dasd_mod.dasd
+
+rd_DASD:: rd.dasd
+
+rdinitdebug rdnetdebug:: rd.debug
+
+rd_NO_DM:: rd.dm=0
+
+rd_DM_UUID:: rd.dm.uuid
+
+rdblacklist:: rd.driver.blacklist
+
+rdinsmodpost:: rd.driver.post
+
+rdloaddriver:: rd.driver.pre
+
+rd_NO_FSTAB:: rd.fstab=0
+
+rdinfo:: rd.info
+
+check:: rd.live.check
+
+rdlivedebug:: rd.live.debug
+
+live_dir:: rd.live.dir
+
+liveimg:: rd.live.image
+
+overlay:: rd.live.overlay
+
+readonly_overlay:: rd.live.overlay.readonly
+
+reset_overlay:: rd.live.overlay.reset
+
+live_ram:: rd.live.ram
+
+rd_NO_CRYPTTAB:: rd.luks.crypttab=0
+
+rd_LUKS_KEYDEV_UUID:: rd.luks.keydev.uuid
+
+rd_LUKS_KEYPATH:: rd.luks.keypath
+
+rd_NO_LUKS:: rd.luks=0
+
+rd_LUKS_UUID:: rd.luks.uuid
+
+rd_NO_LVMCONF:: rd.lvm.conf
+
+rd_LVM_LV:: rd.lvm.lv
+
+rd_NO_LVM:: rd.lvm=0
+
+rd_LVM_SNAPSHOT:: rd.lvm.snapshot
+
+rd_LVM_SNAPSIZE:: rd.lvm.snapsize
+
+rd_LVM_VG:: rd.lvm.vg
+
+rd_NO_MDADMCONF:: rd.md.conf=0
+
+rd_NO_MDIMSM:: rd.md.imsm=0
+
+rd_NO_MD:: rd.md=0
+
+rd_MD_UUID:: rd.md.uuid
+
+rd_NFS_DOMAIN:: rd.nfs.domain
+
+iscsi_initiator:: rd.iscsi.initiator
+
+iscsi_target_name:: rd.iscsi.target.name
+
+iscsi_target_ip:: rd.iscsi.target.ip
+
+iscsi_target_port:: rd.iscsi.target.port
+
+iscsi_target_group:: rd.iscsi.target.group
+
+iscsi_username:: rd.iscsi.username
+
+iscsi_password:: rd.iscsi.password
+
+iscsi_in_username:: rd.iscsi.in.username
+
+iscsi_in_password:: rd.iscsi.in.password
+
+iscsi_firmware:: rd.iscsi.firmware=0
+
+rd_NO_PLYMOUTH:: rd.plymouth=0
+
+rd_retry:: rd.retry
+
+rdshell:: rd.shell
+
+rd_NO_SPLASH:: rd.splash
+
+rdudevdebug:: rd.udev.debug
+
+rdudevinfo:: rd.udev.info
+
+rd_NO_ZFCPCONF:: rd.zfcp.conf=0
+
+rd_ZFCP:: rd.zfcp
+
+rd_ZNET:: rd.znet
+
+KEYMAP:: vconsole.keymap
+
+KEYTABLE:: vconsole.keymap
+
+SYSFONT:: vconsole.font
+
+CONTRANS:: vconsole.font.map
+
+UNIMAP:: vconsole.font.unimap
+
+UNICODE:: vconsole.unicode
+
+EXT_KEYMAP:: vconsole.keymap.ext
+
+Configuration in the Initramfs
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+_/etc/conf.d/_::
+    Any files found in _/etc/conf.d/_ will be sourced in the initramfs to
+    set initial values. Command line options will override these values
+    set in the configuration files.
+
+_/etc/cmdline_::
+    Can contain additional command line options.
+
+_/etc/cmdline.d/*.conf_::
+    Can contain additional command line options.
+
+AUTHOR
+------
+*Harald Hoyer*::
+    Project Leader and Developer
+
+SEE ALSO
+--------
+*dracut*(8) *dracut.conf*(5)

dracut.conf

@@ -1,9 +1,15 @@
+# PUT YOUR CONFIG HERE OR IN separate files named *.conf
+# in /etc/dracut.conf.d
+# /etc/dracut.conf.d/*.conf will override the settings in here
+
 # Sample dracut config file
 
 logfile=/var/log/dracut.log
 fileloglvl=6
 
-# Specific list of dracut modules to use
+# Exact list of dracut modules to use.  Modules not listed here are not going
+# to be included.  If you only want to add some optional modules use
+# add_dracutmodules option instead.
 #dracutmodules+=""
 
 # Dracut modules to omit
@@ -27,3 +33,16 @@ mdadmconf="yes"
 
 # install local /etc/lvm/lvm.conf
 lvmconf="yes"
+
+# A list of fsck tools to install. If it's not specified, module's hardcoded
+# default is used, currently: "umount mount /sbin/fsck* xfs_db xfs_check
+# xfs_repair e2fsck jfs_fsck reiserfsck btrfsck". The installation is
+# opportunistic, so non-existing tools are just ignored.
+#fscks=""
+
+# inhibit installation of any fsck tools
+#nofscks="yes"
+
+# set the directory for temporary files
+# default: /var/tmp
+#tmpdir=/tmp

dracut.conf.5.asc

@@ -0,0 +1,138 @@
+DRACUT.CONF(5)
+==============
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+dracut.conf - configuration file(s) for dracut
+
+SYNOPSIS
+--------
+_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_
+
+Description
+-----------
+_dracut.conf_ is loaded during the initialisation phase of dracut. Command line
+parameter will overwrite any values set here. _dracut.conf.d/*.conf_ files are
+read in alphanumerical order and will overwrite parameters set in
+_/etc/dracut.conf_. Each line specifies an attribute and a value. A '#'
+indicates the beginning of a comment; following characters, up to the end of the
+line are not interpreted.
+
+*dracutmodules+=*" __<dracut modules>__ "::
+    Specify a space-separated list of dracut modules to call when building the
+    initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
+
+*omit_dracutmodules+=*" __<dracut modules>__ "::
+    Omit a space-separated list of dracut modules.
+
+*add_dracutmodules+=*" __<dracut modules>__ "::
+    Add a space-separated list of dracut modules.
+
+*drivers+=*" __<kernel modules>__ "::
+    Specify a space-separated list of kernel modules to exclusively include in
+    the initramfs. The kernel modules have to be specified without the ".ko"
+    suffix.
+
+*add_drivers+=*" __<kernel modules>__ "::
+    Specify a space-separated list of kernel modules to add to the initramfs.
+    The kernel modules have to be specified without the ".ko" suffix.
+
+*omit_drivers+=*" __<kernel modules>__ "::
+    Specify a space-separated list of kernel modules not to add to the
+    initramfs. The kernel modules have to be specified without the ".ko" suffix.
+
+*install_items+=*" __<kernel modules>__ "::
+    Specify a space-separated list of files, which are added to the initramfs
+    image.
+
+*filesystems+=*" __<filesystem names>__ "::
+    Specify a space-separated list of kernel filesystem modules to exclusively
+    include in the generic initramfs.
+
+*drivers_dir=*"__<kernel modules directory>__"::
+    Specify the directory, where to look for kernel modules
+
+*fw_dir+=*" :__<dir>__[:__<dir>__ ...] "::
+    Specify additional directories, where to look for firmwares, separated by :
+
+*install_items+=*" __<file>__[ __<file>__ ...] "::
+    Specify additional files to include in the initramfs, separated by spaces.
+
+*do_strip=*"__{yes|no}__"::
+    Strip binaries in the initramfs (default=yes)
+
+*hostonly=*"__{yes|no}__"::
+    Host-Only mode: Install only what is needed for booting the local host instead of a generic host.
+
+*tmpdir=*"__<temporary directory>__"::
+    Specify temporary directory to use.
+
+[WARNING]
+====
+If chrooted to another root other than the real root device, use --fstab and provide a valid _/etc/fstab_.
+====
+
+*use_fstab=*"__{yes|no}__"::
+    Use _/etc/fstab_ instead of _/proc/self/mountinfo_.
+
+*add_fstab+=*" __<filename>__ "::
+    Add entries of __<filename>__ to the initramfs /etc/fstab.
+
+*mdadmconf=*"__{yes|no}__"::
+    Include local _/etc/mdadm.conf_ (default=yes)
+
+*lvmconf=*"__{yes|no}__"::
+    Include local _/etc/lvm/lvm.conf_ (default=yes)
+
+*fscks=*" __<fsck tools>__ "::
+    Add a space-separated list of fsck tools. If nothing is specified, the
+    default is: "umount mount /sbin/fsck* xfs_db xfs_check xfs_repair e2fsck
+    jfs_fsck reiserfsck btrfsck". The installation is opportunistic
+    (non-existing tools are ignored).
+
+*nofscks=*"__{yes|no}__"::
+    If specified, inhibit installation of any fsck tools.
+
+*kernel_only=*"__{yes|no}__"::
+    Only install kernel drivers and firmware files. (default=no)
+
+*no_kernel=*"{yes|no}"::
+    Do not install kernel drivers and firmware files (default=no)
+
+*stdloglvl*="__\{0-6\}__"::
+    Set logging to standard error level.
+
+*sysloglvl*="__\{0-6\}__"::
+    Set logging to syslog level.
+
+*fileloglvl=*"__\{0-6\}__"::
+    Set logging to file level.
+
+*logfile=*"__<file>__"::
+    Path to log file.
+
+*show_modules=*"__{yes|no}__"::
+    Print included module's name to standard output during build.
+
+Files
+-----
+_/etc/dracut.conf_::
+    Old configuration file. You better use your own file in
+    _/etc/dracut/conf.d/_.
+
+_/etc/dracut/conf.d/_::
+    Any _/etc/dracut/conf.d/*.conf_ file can overwrite the values in
+    _/etc/dracut.conf_. The configuration files are read in alphanumerical
+    order.
+
+AUTHOR
+------
+Harald Hoyer
+
+See Also
+--------
+*dracut*(8) *dracut.cmdline*(7)
+

dracut.conf.5.xml

@@ -1,241 +0,0 @@
-<?xml version='1.0' encoding='UTF-8'?>
-<!-- This document was created with Syntext Serna Free. --><!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" []>
-<refentry id="dracutconf5">
-  <refentryinfo>
-    <title>dracut.conf</title>
-    <productname>dracut</productname>
-    <authorgroup>
-      <author>
-        <contrib>Developer</contrib>
-        <firstname>Harald</firstname>
-        <surname>Hoyer</surname>
-        <email>harald@redhat.com</email>
-      </author>
-    </authorgroup>
-  </refentryinfo>
-  <refmeta>
-    <refentrytitle>dracut.conf</refentrytitle>
-    <manvolnum>5</manvolnum>
-  </refmeta>
-  <refnamediv>
-    <refname>dracut.conf</refname>
-    <refpurpose>configuration file(s) for dracut</refpurpose>
-  </refnamediv>
-  <refsynopsisdiv>
-    <cmdsynopsis>
-      <command>/etc/dracut.conf</command>
-      <arg choice="plain">
-        <replaceable>/etc/dracut.conf.d/*.conf</replaceable>
-      </arg>
-      <sbr/>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-  <refsect1>
-    <title>Description</title>
-    <para><filename>dracut.conf</filename>
-is loaded during the initialisation phase of dracut.
-Command line parameter will overwrite any values set here.
-<emphasis><filename>dracut.conf.d/*.conf</filename> files are read in alphanumerical order and will</emphasis>
-overwrite parameters set in <filename>/etc/dracut.conf</filename>. Each line specifies an attribute and a value. A &apos;#&apos; indicates the beginning of a comment; following characters, up to the end of the line are not interpreted.</para>
-    <variablelist>
-      <varlistentry>
-        <term>
-          <envar>dracutmodules+=&quot;&nbsp;<replaceable>&lt;dracut modules&gt;</replaceable>&nbsp;&quot;</envar>
-        </term>
-        <listitem>
-          <para>Specify a space-separated list of dracut modules to
-call when building the initramfs. Modules are located
-in <filename>/usr/share/dracut/modules.d</filename>.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>omit_dracutmodules+=&quot;&nbsp;<replaceable>&lt;dracut modules&gt;</replaceable>&nbsp;&quot;</envar>
-        </term>
-        <listitem>
-          <para>Omit a space-separated list of dracut modules.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>add_dracutmodules+=&quot;&nbsp;<replaceable>&lt;dracut modules&gt;</replaceable>&nbsp;&quot;</envar>
-        </term>
-        <listitem>
-          <para>Add a space-separated list of dracut modules.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>drivers+=&quot;&nbsp;<replaceable>&lt;kernel modules&gt;</replaceable>&nbsp;&quot;</envar>
-        </term>
-        <listitem>
-          <para>Specify a space-separated list of kernel modules to
-exclusively include in the initramfs.
-The kernel modules have to be specified without the &quot;.ko&quot; suffix.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>add_drivers+=&quot;&nbsp;<replaceable>&lt;kernel modules&gt;</replaceable>&nbsp;&quot;</envar>
-        </term>
-        <listitem>
-          <para>Specify a space-separated list of kernel 
-modules to add to the initramfs.
-The kernel modules have to be specified without the &quot;.ko&quot; suffix.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>filesystems+=&quot;&nbsp;<replaceable>&lt;filesystem names&gt;</replaceable>&nbsp;&quot;</envar>
-        </term>
-        <listitem>
-          <para>Specify a space-separated list of kernel filesystem
-modules to exclusively include in the generic
-initramfs.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>drivers_dir=&quot;<replaceable>&lt;kernel modules directory&gt;</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Specify the directory, where to look for kernel modules</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>fw_dir+=&quot;&#160;:<replaceable>&lt;dir&gt;</replaceable>[:<replaceable>&lt;dir&gt;</replaceable>&nbsp;...]&nbsp;&quot;</envar>
-        </term>
-        <listitem>
-          <para>Specify additional directories, where to look for firmwares, separated by <constant>:</constant></para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>do_strip=&quot;<replaceable>{yes|no}</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Strip binaries in the initramfs (default=yes)</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>hostonly=&quot;<replaceable>{yes|no}</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Host-Only mode: Install only what is needed for booting 
-   the local host instead of a generic host.
-   <warning><para>If chrooted to another root other than the real root device, use <option>--fstab</option> and provide a valid <filename>/etc/fstab</filename>.</para>
-            </warning>
-   </para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>use_fstab=&quot;<replaceable>{yes|no}</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Use <filename>/etc/fstab</filename> instead of <filename>/proc/self/mountinfo</filename>.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>mdadmconf=&quot;<replaceable>{yes|no}</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Include local <filename>/etc/mdadm.conf</filename> (default=yes)</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>lvmconf=&quot;<replaceable>{yes|no}</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Include local <filename>/etc/lvm/lvm.conf</filename> (default=yes)</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>kernel_only=&quot;<replaceable>{yes|no}</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Only install kernel drivers and firmware files. (default=no)</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>no_kernel=&quot;<replaceable>{yes|no}</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Do not install kernel drivers and firmware files (default=no)</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>stdloglvl=&quot;<replaceable>{0-6}</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Set logging to standard error level.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>sysloglvl=&quot;<replaceable>{0-6}</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Set logging to syslog level.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>fileloglvl=&quot;<replaceable>{0-6}</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Set logging to file level.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>logfile=&quot;<replaceable>&lt;file&gt;</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Path to log file.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term>
-          <envar>show_modules=&quot;<replaceable>{yes|no}</replaceable>&quot;</envar>
-        </term>
-        <listitem>
-          <para>Print included module's name to standard output during build.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-  <refsect1>
-    <title>Files</title>
-    <variablelist>
-      <varlistentry>
-        <term>
-          <filename>/etc/dracut/conf.d/</filename>
-        </term>
-        <listitem>
-          <para>Any <filename>/etc/dracut/conf.d/*.conf</filename> file can overwrite the values in <filename>/etc/dracut.conf</filename>.
-The configuration files are read in alphanumerical order.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-  <refsect1>
-    <title>See Also</title>
-    <para><citerefentry>
-        <refentrytitle>dracut</refentrytitle>
-        <manvolnum>8</manvolnum>
-      </citerefentry>
-      <citerefentry>
-        <refentrytitle>dracut.kernel</refentrytitle>
-        <manvolnum>7</manvolnum>
-      </citerefentry>
-    </para>
-  </refsect1>
-</refentry>

dracut.conf.d/fedora.conf.example

@@ -1,7 +1,10 @@
-# /etc/dracut.conf.d/redhat.conf
 # Dracut config file customized for RedHat/Fedora.
 
 # i18n
 i18n_vars="/etc/sysconfig/keyboard:KEYTABLE-KEYMAP /etc/sysconfig/i18n:SYSFONT-FONT,FONTACM-FONT_MAP,FONT_UNIMAP"
-add_dracutmodules+=" rpmversion "
+omit_dracutmodules+=" dash "
+omit_drivers+=" .*/fs/ocfs/.* "
 stdloglvl=3
+realinitpath="/usr/lib/systemd/systemd"
+install_items+=" vi /etc/virc ps grep cat rm "
+prefix="/"

dracut.logrotate

@@ -2,6 +2,5 @@
     missingok
     notifempty
     size 30k
-    yearly
     create 0600 root root
 }

dracut.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
-# 
+#
 # Generator script for a dracut initramfs
 # Tries to retain some degree of compatibility with the command line
 # of the various mkinitrd implementations out there
@@ -27,38 +27,53 @@
 dracut_args="$@"
 
 usage() {
+    [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
+    if [[ -f $dracutbasedir/dracut-version.sh ]]; then
+        . $dracutbasedir/dracut-version.sh
+    fi
+
 #                                                       80x25 linebreak here ^
     cat << EOF
 Usage: $0 [OPTION]... <initramfs> <kernel-version>
+
+Version: $DRACUT_VERSION
+
 Creates initial ramdisk images for preloading modules
 
   -f, --force           Overwrite existing initramfs file.
   -m, --modules [LIST]  Specify a space-separated list of dracut modules to
                          call when building the initramfs. Modules are located
-                         in /usr/share/dracut/modules.d.
+                         in /usr/lib/dracut/modules.d.
   -o, --omit [LIST]     Omit a space-separated list of dracut modules.
   -a, --add [LIST]      Add a space-separated list of dracut modules.
   -d, --drivers [LIST]  Specify a space-separated list of kernel modules to
                         exclusively include in the initramfs.
-  --add-drivers [LIST]  Specify a space-separated list of kernel 
+  --add-drivers [LIST] Specify a space-separated list of kernel
                         modules to add to the initramfs.
+  --omit-drivers [LIST] Specify a space-separated list of kernel
+                        modules not to add to the initramfs.
   --filesystems [LIST]  Specify a space-separated list of kernel filesystem
                         modules to exclusively include in the generic
                         initramfs.
-  -k, --kmoddir [DIR]   Specify the directory, where to look for kernel 
+  -k, --kmoddir [DIR]   Specify the directory, where to look for kernel
                         modules
-  --fwdir [DIR]         Specify additional directories, where to look for 
+  --fwdir [DIR]         Specify additional directories, where to look for
                         firmwares, separated by :
   --kernel-only         Only install kernel drivers and firmware files
   --no-kernel           Do not install kernel drivers and firmware files
   --strip               Strip binaries in the initramfs
   --nostrip             Do not strip binaries in the initramfs (default)
+  --prefix [DIR]        Prefix initramfs files with [DIR]
+  --noprefix            Do not prefix initramfs files (default)
   --mdadmconf           Include local /etc/mdadm.conf
   --nomdadmconf         Do not include local /etc/mdadm.conf
   --lvmconf             Include local /etc/lvm/lvm.conf
   --nolvmconf           Do not include local /etc/lvm/lvm.conf
+  --fscks [LIST]        Add a space-separated list of fsck helpers.
+  --nofscks             Inhibit installation of any fsck helpers.
   -h, --help            This message
   --debug               Output debug information of the build process
+  --profile             Output profile information of the build process
   -L, --stdlog [0-6]    Specify logging level (to standard error)
                          0 - suppress any messages
                          1 - only fatal errors
@@ -71,19 +86,26 @@ Creates initial ramdisk images for preloading modules
   -q, --quiet           Decrease verbosity level (default is info(4))
   -c, --conf [FILE]     Specify configuration file to use.
                          Default: /etc/dracut.conf
-  --confdir [DIR]       Specify configuration directory to use *.conf files 
+  --confdir [DIR]       Specify configuration directory to use *.conf files
                          from. Default: /etc/dracut.conf.d
+  --tmpdir [DIR]        Temporary directory to be used instead of default
+                         /var/tmp.
   -l, --local           Local mode. Use modules from the current working
                          directory instead of the system-wide installed in
-                         /usr/share/dracut/modules.d.
+                         /usr/lib/dracut/modules.d.
                          Useful when running dracut from a git checkout.
   -H, --hostonly        Host-Only mode: Install only what is needed for
                          booting the local host instead of a generic host.
+  --no-hostonly         Disables Host-Only mode
   --fstab               Use /etc/fstab to determine the root device.
+  --add-fstab [FILE]    Add file to the initramfs fstab
+  --mount "[DEV] [MP] [FSTYPE] [FSOPTS]"
+                        Mount device [DEV] on mountpoint [MP] with filesystem
+                        [FSTYPE] and options [FSOPTS] in the initramfs
   -i, --include [SOURCE] [TARGET]
                         Include the files in the SOURCE directory into the
                          Target directory in the final initramfs.
-                        If SOURCE is a file, it will be installed to TARGET 
+                        If SOURCE is a file, it will be installed to TARGET
                          in the final initramfs.
   -I, --install [LIST]  Install the space separated list of files into the
                          initramfs.
@@ -94,20 +116,27 @@ Creates initial ramdisk images for preloading modules
                          Make sure your kernel has bzip2 decompression support
                          compiled in, otherwise you will not be able to boot.
   --lzma                Compress the generated initramfs using lzma.
-                         Make sure your kernel has lzma support compiled in, 
+                         Make sure your kernel has lzma support compiled in,
                          otherwise you will not be able to boot.
   --xz                  Compress the generated initramfs using xz.
                          Make sure that your kernel has xz support compiled
                          in, otherwise you will not be able to boot.
   --compress [COMPRESSION] Compress the generated initramfs with the
                          passed compression program.  Make sure your kernel
-                         knows how to decompress the generated initramfs, 
+                         knows how to decompress the generated initramfs,
                          otherwise you will not be able to boot.
   --no-compress         Do not compress the generated initramfs.  This will
                          override any other compression options.
   --list-modules        List all available dracut modules.
   -M, --show-modules    Print included module's name to standard output during
                          build.
+  --keep                Keep the temporary initramfs for debugging purposes
+  --printsize           Print out the module install size
+  --sshkey [SSHKEY]     Add ssh key to initramfs (use with ssh-client module)
+
+If [LIST] has multiple arguments, then you have to put these in quotes.
+For example:
+# dracut --add-drivers "module1 module2"  ...
 EOF
 }
 
@@ -135,7 +164,7 @@ push() {
 # val=$(pop stack)
 pop() {
     local __stack=$1; shift
-    local __resultvar=$1    
+    local __resultvar=$1
     local myresult;
     # check for empty stack
     eval '[[ ${#'${__stack}'[@]} -eq 0 ]] && return 1'
@@ -187,43 +216,59 @@ push_arg() {
     fi
 }
 
-kernel="unset"
 verbosity_mod_l=0
 
 while (($# > 0)); do
     case ${1%%=*} in
         -a|--add)      push_arg add_dracutmodules_l  "$@" || shift;;
+        --force-add)   push_arg force_add_dracutmodules_l  "$@" || shift;;
         --add-drivers) push_arg add_drivers_l        "$@" || shift;;
+        --omit-drivers) push_arg omit_drivers_l      "$@" || shift;;
         -m|--modules)  push_arg dracutmodules_l      "$@" || shift;;
         -o|--omit)     push_arg omit_dracutmodules_l "$@" || shift;;
         -d|--drivers)  push_arg drivers_l            "$@" || shift;;
         --filesystems) push_arg filesystems_l        "$@" || shift;;
-        -I|--install)  push_arg install_items        "$@" || shift;;
+        -I|--install)  push_arg install_items_l      "$@" || shift;;
         --fwdir)       push_arg fw_dir_l             "$@" || shift;;
+        --libdirs)     push_arg libdirs_l            "$@" || shift;;
+        --fscks)       push_arg fscks_l              "$@" || shift;;
+        --add-fstab)   push_arg add_fstab_l          "$@" || shift;;
+        --mount)       push_arg fstab_lines          "$@" || shift;;
+        --nofscks)     nofscks_l="yes";;
         -k|--kmoddir)  read_arg drivers_dir_l        "$@" || shift;;
         -c|--conf)     read_arg conffile             "$@" || shift;;
         --confdir)     read_arg confdir              "$@" || shift;;
+        --tmpdir)      read_arg tmpdir_l             "$@" || shift;;
         -L|--stdlog)   read_arg stdloglvl_l          "$@" || shift;;
-        -I|--install)  read_arg install_items        "$@" || shift;;
-        --fwdir)       read_arg fw_dir_l             "$@" || shift;;
         --compress)    read_arg compress_l           "$@" || shift;;
+        --prefix)      read_arg prefix_l             "$@" || shift;;
         -f|--force)    force=yes;;
         --kernel-only) kernel_only="yes"; no_kernel="no";;
         --no-kernel)   kernel_only="no"; no_kernel="yes";;
         --strip)       do_strip_l="yes";;
         --nostrip)     do_strip_l="no";;
+        --noprefix)    prefix_l="/";;
         --mdadmconf)   mdadmconf_l="yes";;
         --nomdadmconf) mdadmconf_l="no";;
         --lvmconf)     lvmconf_l="yes";;
         --nolvmconf)   lvmconf_l="no";;
         --debug)       debug="yes";;
+        --profile)     profile="yes";;
+        --sshkey)      read_arg sshkey   "$@" || shift;;
         -v|--verbose)  ((verbosity_mod_l++));;
         -q|--quiet)    ((verbosity_mod_l--));;
-        -l|--local)    allowlocal="yes" ;;
+        -l|--local)
+                       allowlocal="yes"
+                       [[ -f "$(readlink -f ${0%/*})/dracut-functions.sh" ]] \
+                           && dracutbasedir="$(readlink -f ${0%/*})"
+                       ;;
         -H|--hostonly) hostonly_l="yes" ;;
+        --no-hostonly) hostonly_l="no" ;;
         --fstab)       use_fstab_l="yes" ;;
         -h|--help)     usage; exit 1 ;;
-        -i|--include)  push include_src "$2"; push include_target "$3"; shift 2;;
+        -i|--include)  push include_src "$2"
+                       push include_target "$3"
+                       shift 2;;
         --bzip2)       compress_l="bzip2";;
         --lzma)        compress_l="lzma";;
         --xz)          compress_l="xz";;
@@ -235,11 +280,13 @@ while (($# > 0)); do
         -M|--show-modules)
                        show_modules_l="yes"
                        ;;
+        --keep)        keep="yes";;
+        --printsize)   printsize="yes";;
         -*) printf "\nUnknown option: %s\n\n" "$1" >&2; usage; exit 1;;
-        *) 
-            if ! [[ $outfile ]]; then
+        *)
+            if ! [[ ${outfile+x} ]]; then
                 outfile=$1
-            elif [[ $kernel = "unset" ]]; then
+            elif ! [[ ${kernel+x} ]]; then
                 kernel=$1
             else
                 usage; exit 1;
@@ -248,23 +295,35 @@ while (($# > 0)); do
     esac
     shift
 done
-if ! [[ $kernel ]] || [[ $kernel = "unset" ]]; then
+if ! [[ $kernel ]]; then
     kernel=$(uname -r)
 fi
 [[ $outfile ]] || outfile="/boot/initramfs-$kernel.img"
 
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-export PATH
+for i in /usr/sbin /sbin /usr/bin /bin; do
+    rl=$i
+    if [ -L "$i" ]; then
+        rl=$(readlink -f $i)
+    fi
+    NPATH+=":$rl"
+done
+export PATH="${NPATH#:}"
+unset NPATH
+unset LD_LIBRARY_PATH
+unset GREP_OPTIONS
 
-[[ $debug ]] && { 
+[[ $debug ]] && {
     export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): ';
     set -x
 }
 
-[[ $dracutbasedir ]] || dracutbasedir=/usr/share/dracut
+[[ $profile ]] && {
+    export PS4='+ $(date "+%s.%N") ${BASH_SOURCE}@${LINENO}: ';
+    set -x
+    debug=yes
+}
 
-[[ $allowlocal && -f "$(readlink -f ${0%/*})/dracut-functions" ]] && \
-    dracutbasedir="$(readlink -f ${0%/*})" 
+[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
 
 # if we were not passed a config file, try the default one
 if [[ ! -f $conffile ]]; then
@@ -282,7 +341,7 @@ fi
 
 # source our config dir
 if [[ $confdir && -d $confdir ]]; then
-    for f in "$confdir"/*.conf; do 
+    for f in "$confdir"/*.conf; do
         [[ -e $f ]] && . "$f"
     done
 fi
@@ -294,9 +353,33 @@ if (( ${#add_dracutmodules_l[@]} )); then
     done
 fi
 
-if (( ${#add_drivers_l[@]} )); then
-    while pop add_drivers_l val; do
-        add_drivers+=" $val "
+if (( ${#force_add_dracutmodules_l[@]} )); then
+    while pop force_add_dracutmodules_l val; do
+        force_add_dracutmodules+=" $val "
+    done
+fi
+
+if (( ${#fscks_l[@]} )); then
+    while pop fscks_l val; do
+        fscks+=" $val "
+    done
+fi
+
+if (( ${#add_fstab_l[@]} )); then
+    while pop add_fstab_l val; do
+        add_fstab+=" $val "
+    done
+fi
+
+if (( ${#fstab_lines_l[@]} )); then
+    while pop fstab_lines_l val; do
+        push fstab_lines $val
+    done
+fi
+
+if (( ${#install_items_l[@]} )); then
+    while pop install_items_l val; do
+        install_items+=" $val "
     done
 fi
 
@@ -315,13 +398,6 @@ if (( ${#omit_dracutmodules_l[@]} )); then
     done
 fi
 
-if (( ${#drivers_l[@]} )); then
-    drivers=''
-    while pop drivers_l val; do
-        drivers+="$val "
-    done
-fi
-
 if (( ${#filesystems_l[@]} )); then
     filesystems=''
     while pop filesystems_l val; do
@@ -336,6 +412,13 @@ if (( ${#fw_dir_l[@]} )); then
     done
 fi
 
+if (( ${#libdirs_l[@]} )); then
+    libdirs=''
+    while pop libdirs_l val; do
+        libdirs+="$val "
+    done
+fi
+
 [[ $stdloglvl_l ]] && stdloglvl=$stdloglvl_l
 [[ ! $stdloglvl ]] && stdloglvl=4
 stdloglvl=$((stdloglvl + verbosity_mod_l))
@@ -344,24 +427,30 @@ stdloglvl=$((stdloglvl + verbosity_mod_l))
 
 [[ $drivers_dir_l ]] && drivers_dir=$drivers_dir_l
 [[ $do_strip_l ]] && do_strip=$do_strip_l
+[[ $prefix_l ]] && prefix=$prefix_l
+[[ $prefix = "/" ]] && unset prefix
 [[ $hostonly_l ]] && hostonly=$hostonly_l
 [[ $use_fstab_l ]] && use_fstab=$use_fstab_l
 [[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
 [[ $lvmconf_l ]] && lvmconf=$lvmconf_l
-[[ $dracutbasedir ]] || dracutbasedir=/usr/share/dracut
-[[ $fw_dir ]] || fw_dir=/lib/firmware
+[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
+[[ $fw_dir ]] || fw_dir="/lib/firmware/updates /lib/firmware"
+[[ $tmpdir_l ]] && tmpdir="$tmpdir_l"
+[[ $tmpdir ]] || tmpdir=/var/tmp
 [[ $do_strip ]] || do_strip=no
 [[ $compress_l ]] && compress=$compress_l
 [[ $show_modules_l ]] && show_modules=$show_modules_l
+[[ $nofscks_l ]] && nofscks="yes"
 # eliminate IFS hackery when messing with fw_dir
 fw_dir=${fw_dir//:/ }
 
 # handle compression options.
+[[ $compress ]] || compress="gzip"
 case $compress in
-    bzip2) compress="bzip -9";;
+    bzip2) compress="bzip2 -9";;
     lzma)  compress="lzma -9";;
     xz)    compress="xz --check=crc32 --lzma2=dict=1MiB";;
-    gzip)  type pigz > /dev/null 2>&1 && compress="pigz -9" || \
+    gzip)  command -v pigz > /dev/null 2>&1 && compress="pigz -9" || \
                                          compress="gzip -9";;
 esac
 if [[ $_no_compress_l = "cat" ]]; then
@@ -370,20 +459,61 @@ fi
 
 [[ $hostonly = yes ]] && hostonly="-h"
 [[ $hostonly != "-h" ]] && unset hostonly
-[[ $compress ]] || compress="gzip -9"
 
-if [[ -f $dracutbasedir/dracut-functions ]]; then
-    . $dracutbasedir/dracut-functions
+if [[ -f $dracutbasedir/dracut-functions.sh ]]; then
+    . $dracutbasedir/dracut-functions.sh
 else
-    echo "Cannot find $dracutbasedir/dracut-functions." >&2
+    echo "Cannot find $dracutbasedir/dracut-functions.sh." >&2
     echo "Are you running from a git checkout?" >&2
     echo "Try passing -l as an argument to $0" >&2
     exit 1
 fi
 
-dracutfunctions=$dracutbasedir/dracut-functions
+if [[ -f $dracutbasedir/dracut-version.sh ]]; then
+    . $dracutbasedir/dracut-version.sh
+fi
+
+# Verify bash version, curret minimum is 3.1
+if (( ${BASH_VERSINFO[0]} < 3 ||
+    ( ${BASH_VERSINFO[0]} == 3 && ${BASH_VERSINFO[1]} < 1 ) )); then
+    dfatal 'You need at least Bash 3.1 to use dracut, sorry.'
+    exit 1
+fi
+
+dracutfunctions=$dracutbasedir/dracut-functions.sh
 export dracutfunctions
 
+if (( ${#drivers_l[@]} )); then
+    drivers=''
+    while pop drivers_l val; do
+        drivers+="$val "
+    done
+fi
+drivers=${drivers/-/_}
+
+if (( ${#add_drivers_l[@]} )); then
+    while pop add_drivers_l val; do
+        add_drivers+=" $val "
+    done
+fi
+add_drivers=${add_drivers/-/_}
+
+if (( ${#omit_drivers_l[@]} )); then
+    while pop omit_drivers_l val; do
+        omit_drivers+=" $val "
+    done
+fi
+omit_drivers=${omit_drivers/-/_}
+
+omit_drivers_corrected=""
+for d in $omit_drivers; do
+    strstr " $drivers $add_drivers " " $d " && continue
+    omit_drivers_corrected+="$d|"
+done
+omit_drivers="${omit_drivers_corrected%|}"
+unset omit_drivers_corrected
+
+
 ddebug "Executing $0 $dracut_args"
 
 [[ $do_list = yes ]] && {
@@ -397,16 +527,23 @@ ddebug "Executing $0 $dracut_args"
 }
 
 # Detect lib paths
-[[ $libdir ]] || for libdir in /lib64 /lib; do
-    [[ -d $libdir ]] && break
-done || {
-    dfatal 'No lib directory?!!!'
-    exit 1
-}
-
-[[ $usrlibdir ]] || for usrlibdir in /usr/lib64 /usr/lib; do
-    [[ -d $usrlibdir ]] && break
-done || dwarn 'No usr/lib directory!'
+if ! [[ $libdir ]] || ! [[ $usrlibdir ]] ; then
+    if strstr "$(ldd /bin/sh)" "/lib64/" &>/dev/null \
+        && [[ -d /lib64 ]]; then
+        libdir=/lib64
+        usrlibdir=/usr/lib64
+    else
+        libdir=/lib
+        usrlibdir=/usr/lib
+    fi
+    for i in $libdir $usrlibdir; do
+        if [[ -d $i ]]; then
+            libdirs+=" $i"
+        else
+            dwarn 'No $i directory??!!'
+        fi
+    done
+fi
 
 # This is kinda legacy -- eventually it should go away.
 case $dracutmodules in
@@ -444,55 +581,192 @@ elif [[ -f "$outfile" && ! -w "$outfile" ]]; then
     exit 1
 fi
 
-[[ $TMPDIR && ! -w $TMPDIR ]] && unset TMPDIR
-readonly initdir=$(mktemp -d -t initramfs.XXXXXX)
+readonly TMPDIR="$tmpdir"
+readonly initdir=$(mktemp --tmpdir="$TMPDIR/" -d -t initramfs.XXXXXX)
+[ -d "$initdir" ] || {
+    dfatal "mktemp failed."
+    exit 1
+}
 
 # clean up after ourselves no matter how we die.
-trap 'ret=$?;rm -rf "$initdir";exit $ret;' EXIT 
+trap 'ret=$?;[[ $keep ]] && echo "Not removing $initdir." >&2 || rm -rf "$initdir";exit $ret;' EXIT
 # clean up after ourselves no matter how we die.
-trap 'exit 1;' SIGINT 
+trap 'exit 1;' SIGINT
 
 # Need to be able to have non-root users read stuff (rpcbind etc)
 chmod 755 "$initdir"
 
-export initdir dracutbasedir dracutmodules drivers \
-    fw_dir drivers_dir debug no_kernel kernel_only \
-    add_drivers mdadmconf lvmconf filesystems \
-    use_fstab libdir usrlibdir \
-    stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \
-    debug
+for line in "${fstab_lines[@]}"; do
+    set -- $line
+    #dev mp fs fsopts
+    push host_devs "$1"
+    push host_fs_types "$1|$3"
+done
 
-if [[ $kernel_only != yes ]]; then
-    # Create some directory structure first
-    for d in bin sbin usr/bin usr/sbin usr/lib etc \
-        proc sys sysroot tmp dev/pts var/run; do 
-        inst_dir "/$d"; 
+for f in $add_fstab; do
+    [ -e $f ] || continue
+    while read dev rest; do
+        push host_devs $dev
+    done < $f
+done
+
+if [[ $hostonly ]]; then
+    # in hostonly mode, determine all devices, which have to be accessed
+    # and examine them for filesystem types
+
+    push host_mp \
+        "/" \
+        "/etc" \
+        "/usr" \
+        "/usr/bin" \
+        "/usr/sbin" \
+        "/usr/lib" \
+        "/usr/lib64" \
+        "/boot"
+
+    for mp in "${host_mp[@]}"; do
+        mountpoint "$mp" >/dev/null 2>&1 || continue
+        push host_devs $(readlink -f "/dev/block/$(find_block_device "$mp")")
     done
 fi
 
+_get_fs_type() (
+    [[ $1 ]] || return
+    if [[ -b $1 ]] && get_fs_env $1; then
+        echo "$(readlink -f $1)|$ID_FS_TYPE"
+        return 1
+    fi
+    if [[ -b /dev/block/$1 ]] && get_fs_env /dev/block/$1; then
+        echo "$(readlink -f /dev/block/$1)|$ID_FS_TYPE"
+        return 1
+    fi
+    if fstype=$(find_dev_fstype $1); then
+        echo "$1|$fstype"
+        return 1
+    fi
+    return 1
+)
+
+for dev in "${host_devs[@]}"; do
+    unset fs_type
+    for fstype in $(_get_fs_type $dev) \
+        $(check_block_and_slaves _get_fs_type $(get_maj_min $dev)); do
+        if ! strstr " ${host_fs_types[*]} " " $fstype ";then
+            push host_fs_types "$fstype"
+        fi
+    done
+done
+
+export initdir dracutbasedir dracutmodules drivers \
+    fw_dir drivers_dir debug no_kernel kernel_only \
+    add_drivers omit_drivers mdadmconf lvmconf filesystems \
+    use_fstab fstab_lines libdir usrlibdir fscks nofscks \
+    stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \
+    debug host_fs_types host_devs sshkey add_fstab \
+    DRACUT_VERSION
+
+# Create some directory structure first
+[[ $prefix ]] && mkdir -m 0755 -p "${initdir}${prefix}"
+
+[[ -h /lib ]] || mkdir -m 0755 -p "${initdir}${prefix}/lib"
+[[ $prefix ]] && ln -sfn "${prefix#/}/lib" "$initdir/lib"
+
+if [[ $prefix ]]; then
+    for d in bin etc lib "$libdir" sbin tmp usr var; do
+        ln -sfn "${prefix#/}/${d#/}" "$initdir/$d"
+    done
+fi
+
+if [[ $kernel_only != yes ]]; then
+    for d in usr/bin usr/sbin bin etc lib "$libdir" sbin tmp usr var var/log var/run var/lock; do
+        [[ -e "${initdir}${prefix}/$d" ]] && continue
+        if [ -L "/$d" ]; then
+            inst_symlink "/$d" "${prefix}/$d"
+        else
+            mkdir -m 0755 -p "${initdir}${prefix}/$d"
+        fi
+    done
+
+    for d in dev proc sys sysroot root run run/lock run/initramfs; do
+        if [ -L "/$d" ]; then
+            inst_symlink "/$d"
+        else
+            mkdir -m 0755 -p "$initdir/$d"
+        fi
+    done
+
+    ln -sfn /run "$initdir/var/run"
+    ln -sfn /run/lock "$initdir/var/lock"
+else
+    for d in lib "$libdir"; do
+        [[ -e "${initdir}${prefix}/$d" ]] && continue
+        if [ -h "/$d" ]; then
+            inst "/$d" "${prefix}/$d"
+        else
+            mkdir -m 0755 -p "${initdir}${prefix}/$d"
+        fi
+    done
+fi
+
+if [[ $kernel_only != yes ]]; then
+    mkdir -p "${initdir}/etc/cmdline.d"
+    for _d in $hookdirs; do
+        mkdir -m 0755 -p ${initdir}/lib/dracut/hooks/$_d
+    done
+    if [[ "$UID" = "0" ]]; then
+        cp -a /dev/kmsg /dev/null /dev/console $initdir/dev
+    fi
+fi
+
+mkdir -p "$initdir/.kernelmodseen"
+
+mods_to_load=""
 # check all our modules to see if they should be sourced.
 # This builds a list of modules that we will install next.
-check_module_dir
+for_each_module_dir check_module
+for_each_module_dir check_mount
 
+_isize=0 #initramfs size
+modules_loaded=" "
 # source our modules.
 for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
-    mod=${moddir##*/}; mod=${mod#[0-9][0-9]}
-    if strstr "$mods_to_load" " $mod "; then
-        [[ $show_modules = yes ]] && echo "$mod" || \
-            dinfo "*** Including module: $mod ***"
+    _d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]}
+    if strstr "$mods_to_load" " $_d_mod "; then
+        [[ $show_modules = yes ]] && echo "$_d_mod" || \
+            dinfo "*** Including module: $_d_mod ***"
         if [[ $kernel_only = yes ]]; then
-            module_installkernel $mod
+            module_installkernel $_d_mod || {
+                dfatal "installkernel failed in module $_d_mod"
+                exit 1
+            }
         else
-            module_install $mod
+            module_install $_d_mod
             if [[ $no_kernel != yes ]]; then
-                module_installkernel $mod
+                module_installkernel $_d_mod || {
+                    dfatal "installkernel failed in module $_d_mod"
+                    exit 1
+                }
             fi
         fi
-        mods_to_load=${mods_to_load// $mod /}
+        mods_to_load=${mods_to_load// $_d_mod /}
+        modules_loaded+="$_d_mod "
+
+        #print the module install size
+        if [ -n "$printsize" ]; then
+            _isize_new=$(du -sk ${initdir}|cut -f1)
+            _isize_delta=$(($_isize_new - $_isize))
+            echo "$_d_mod install size: ${_isize_delta}k"
+            _isize=$_isize_new
+        fi
     fi
 done
 unset moddir
-dinfo "*** Including modules' done ***"
+
+for i in $modules_loaded; do
+    echo "$i" >> $initdir/lib/dracut/modules.txt
+done
+
+dinfo "*** Including modules done ***"
 
 ## final stuff that has to happen
 
@@ -510,36 +784,63 @@ while pop include_src src && pop include_target tgt; do
         else
             ddebug "Including directory: $src"
             mkdir -p "${initdir}/${tgt}"
-            cp -a -t "${initdir}/${tgt}" "$src"/*
+            # check for preexisting symlinks, so we can cope with the
+            # symlinks to $prefix
+            for i in "$src"/*; do
+                [[ -e "$i" || -h "$i" ]] || continue
+                s=${initdir}/${tgt}/${i#$src/}
+                if [[ -d "$i" ]]; then
+                    if ! [[ -e "$s" ]]; then
+                        mkdir -m 0755 -p "$s"
+                        chmod --reference="$i" "$s"
+                    fi
+                    cp -a -t "$s" "$i"/*
+                else
+                    cp -a -t "$s" "$i"
+                fi
+            done
         fi
     fi
 done
 
-while pop install_items items; do
-    for item in $items; do
+if [[ $kernel_only != yes ]]; then
+    for item in $install_items; do
         dracut_install "$item"
     done
-done
-unset item
+    unset item
 
-# make sure that library links are correct and up to date
-dracut_install /etc/ld.so.conf /etc/ld.so.conf.d/*
-if ! ldconfig -r "$initdir"; then
-    if [[ $UID = 0 ]]; then
-        derror "ldconfig exited ungracefully"
-    else
-        derror "ldconfig might need uid=0 (root) for chroot()"
+    while pop fstab_lines line; do
+        echo "$line 0 0" >> "${initdir}/etc/fstab"
+    done
+
+    for f in $add_fstab; do
+        cat $f >> "${initdir}/etc/fstab"
+    done
+
+    # make sure that library links are correct and up to date
+    for f in /etc/ld.so.conf /etc/ld.so.conf.d/*; do
+        [[ -f $f ]] && inst_simple "$f"
+    done
+    if ! ldconfig -r "$initdir"; then
+        if [[ $UID = 0 ]]; then
+            derror "ldconfig exited ungracefully"
+        else
+            derror "ldconfig might need uid=0 (root) for chroot()"
+        fi
     fi
 fi
 
+rm -fr "$initdir/.kernelmodseen"
+
+
 if (($maxloglvl >= 5)); then
     ddebug "Listing sizes of included files:"
     du -c "$initdir" | sort -n | ddebug
 fi
 
-# strip binaries 
+# strip binaries
 if [[ $do_strip = yes ]] ; then
-    for p in strip grep find; do 
+    for p in strip grep find; do
         if ! type -P $p >/dev/null; then
             derror "Could not find '$p'. You should run $0 with '--nostrip'."
             do_strip=no
@@ -560,11 +861,23 @@ type hardlink &>/dev/null && {
     hardlink "$initdir" 2>&1
 }
 
-if ! ( cd "$initdir"; find . |cpio -R 0:0 -H newc -o --quiet | \
-    $compress > "$outfile"; ); then 
+if strstr "$modules_loaded" " fips " && command -v prelink >/dev/null; then
+    for dir in "$initdir/bin" \
+       "$initdir/sbin" \
+       "$initdir/usr/bin" \
+       "$initdir/usr/sbin"; do
+        [[ -L "$dir" ]] && continue
+        for i in "$dir"/*; do
+            [[ -x $i ]] && prelink -u $i &>/dev/null
+        done
+    done
+fi
+
+if ! ( cd "$initdir"; find . |cpio -R 0:0 -H newc -o --quiet| \
+    $compress > "$outfile"; ); then
     dfatal "dracut: creation of $outfile failed"
     exit 1
-fi 
+fi
 
 dinfo "Wrote $outfile:"
 dinfo "$(ls -l "$outfile")"

dracut.spec

@@ -1,3 +1,5 @@
+%define dracutlibdir %{_prefix}/lib/dracut
+
 # Variables must be defined
 %define with_nbd                1
 
@@ -6,48 +8,44 @@
 %define with_nbd 0
 %endif
 
-%if %{defined gittag}
-%define rdist .git%{gittag}%{?dist}
-%define dashgittag -%{gittag}
-%else
-%define rdist %{?dist}
-%endif
-
 Name: dracut
-Version: 009
-%define release_prefix 0%{?rdist}
-Release: %{release_prefix}
+Version: xxx
+Release: xxx
 
 Summary: Initramfs generator using udev
-%if 0%{?fedora}
-Group: System Environment/Base          
+%if 0%{?fedora} || 0%{?rhel}
+Group: System Environment/Base
 %endif
 %if 0%{?suse_version}
 Group: System/Base
 %endif
-License: GPLv2+ 
-URL: http://apps.sourceforge.net/trac/dracut/wiki
-# Source can be generated by 
-# http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=snapshot;h=%{?dashgittag};sf=tgz
-Source0: dracut-%{version}%{?dashgittag}.tar.bz2
-BuildArch: noarch
+License: GPLv2+
+URL: https://dracut.wiki.kernel.org/
+# Source can be generated by
+# http://git.kernel.org/?p=boot/dracut/dracut.git;a=snapshot;h=%{version};sf=tgz
+Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.bz2
 
-%if 0%{?fedora}
+BuildArch: noarch
+BuildRequires: dash bash git
+
+%if 0%{?fedora} || 0%{?rhel}
 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
 %endif
 %if 0%{?suse_version}
 BuildRoot: %{_tmppath}/%{name}-%{version}-build
 %endif
 
-%if 0%{?fedora}
+%if 0%{?fedora} || 0%{?rhel}
 BuildRequires: docbook-style-xsl docbook-dtds libxslt
 %endif
 
 %if 0%{?suse_version}
-BuildRequires: docbook-xsl-stylesheets libxslt
+-BuildRequires: docbook-xsl-stylesheets libxslt
 %endif
 
-%if 0%{?fedora} > 12 || 0%{?rhel} >= 6
+BuildRequires: asciidoc
+
+%if 0%{?fedora} > 12 || 0%{?rhel}
 # no "provides", because dracut does not offer
 # all functionality of the obsoleted packages
 Obsoletes: mkinitrd <= 6.0.93
@@ -56,6 +54,10 @@ Obsoletes: nash <= 6.0.93
 Obsoletes: libbdevid-python <= 6.0.93
 %endif
 
+%if 0%{?fedora} > 16 || 0%{?rhel} > 6
+BuildRequires: systemd-units
+%endif
+
 %if 0%{?suse_version} > 9999
 Obsoletes: mkinitrd < 2.6.1
 Provides: mkinitrd = 2.6.1
@@ -65,60 +67,38 @@ Obsoletes: dracut-kernel < 005
 Provides:  dracut-kernel = %{version}-%{release}
 
 Requires: bash
-Requires: bzip2
 Requires: coreutils
 Requires: cpio
-Requires: dash
 Requires: filesystem >= 2.1.0
 Requires: findutils
 Requires: grep
-Requires: gzip
-Requires: kbd
-Requires: mktemp >= 1.5-5
+Requires: hardlink
+Requires: gzip xz
 Requires: module-init-tools >= 3.7-9
 Requires: sed
-Requires: tar
-Requires: udev
-
-%if 0%{?fedora}
-Requires: util-linux >= 2.16
-Requires: initscripts >= 8.63-1
-Requires: plymouth >= 0.8.0-0.2009.29.09.19.1
+Requires: file
+Requires: udev > 166
+%if 0%{?fedora} || 0%{?rhel} > 6
+Requires: util-linux >= 2.21
+%else
+Requires: util-linux-ng >= 2.21
 %endif
 
-%if 0%{?suse_version}
-Requires: util-linux >= 2.16
+%if 0%{?fedora} || 0%{?rhel} > 6
+Conflicts: initscripts < 8.63-1
+Conflicts: plymouth < 0.8.0-0.2009.29.09.19.1
 %endif
 
-
 %description
-Dracut contains tools to create a bootable initramfs for 2.6 Linux kernels. 
-Unlike existing implementations, dracut does hard-code as little as possible 
-into the initramfs. Dracut contains various modules which are driven by the 
-event-based udev. Having root on MD, DM, LVM2, LUKS is supported as well as 
+Dracut contains tools to create a bootable initramfs for 2.6 Linux kernels.
+Unlike existing implementations, dracut does hard-code as little as possible
+into the initramfs. Dracut contains various modules which are driven by the
+event-based udev. Having root on MD, DM, LVM2, LUKS is supported as well as
 NFS, iSCSI, NBD, FCoE with the dracut-network package.
 
 %package network
 Summary: Dracut modules to build a dracut initramfs with network support
 Requires: %{name} = %{version}-%{release}
-Requires: rpcbind 
-%if %{with_nbd}
-Requires: nbd
-%endif
-Requires: net-tools iproute
-Requires: bridge-utils
-
-%if 0%{?fedora}
-Requires: iscsi-initiator-utils
-Requires: nfs-utils 
-Requires: dhclient
-%endif
-
-%if 0%{?suse_version}
-Requires: dhcp-client
-Requires: nfs-client
-Requires: vlan
-%endif
 Obsoletes: dracut-generic < 008
 Provides:  dracut-generic = %{version}-%{release}
 
@@ -126,7 +106,7 @@ Provides:  dracut-generic = %{version}-%{release}
 This package requires everything which is needed to build a generic
 all purpose initramfs with network support with dracut.
 
-%if 0%{?fedora}
+%if 0%{?fedora} || 0%{?rhel} >= 6
 %package fips
 Summary: Dracut modules to build a dracut initramfs with an integrity check
 Requires: %{name} = %{version}-%{release}
@@ -144,6 +124,15 @@ This package requires everything which is needed to build an
 all purpose initramfs with dracut, which does an integrity check.
 %endif
 
+%package fips-aesni
+Summary: Dracut modules to build a dracut initramfs with an integrity check with aesni-intel
+Requires: %{name}-fips = %{version}-%{release}
+
+%description fips-aesni
+This package requires everything which is needed to build an
+all purpose initramfs with dracut, which does an integrity check
+and adds the aesni-intel kernel module.
+
 %package caps
 Summary: Dracut modules to build a dracut initramfs which drops capabilities
 Requires: %{name} = %{version}-%{release}
@@ -161,26 +150,51 @@ Requires: %{name} = %{version}-%{release}
 This package contains tools to assemble the local initrd and host configuration.
 
 %prep
-%setup -q -n %{name}-%{version}%{?dashgittag}
+%setup -q -n %{name}-%{version}
+
+%if %{defined PATCH1}
+git init
+git config user.email "dracut-maint@redhat.com"
+git config user.name "Fedora dracut team"
+git add .
+git commit -a -q -m "%{version} baseline."
+
+# Apply all the patches.
+git am -p1 %{patches}
+%endif
 
 %build
-make WITH_SWITCH_ROOT=0%{?with_switch_root}
+make all
 
 %install
-%if 0%{?fedora}
+%if 0%{?fedora} || 0%{?rhel}
 rm -rf $RPM_BUILD_ROOT
 %endif
-make install DESTDIR=$RPM_BUILD_ROOT sbindir=/sbin \
-     sysconfdir=/etc mandir=%{_mandir} WITH_SWITCH_ROOT=0%{?with_switch_root}
+make install DESTDIR=$RPM_BUILD_ROOT \
+     libdir=%{_prefix}/lib \
+     bindir=%{_bindir} \
+%if %{defined _unitdir}
+     systemdsystemunitdir=%{_unitdir} \
+%endif
+     sysconfdir=/etc mandir=%{_mandir}
 
-echo %{name}-%{version}-%{release} > $RPM_BUILD_ROOT/%{_datadir}/dracut/modules.d/10rpmversion/dracut-version
+echo "DRACUT_VERSION=%{version}-%{release}" > $RPM_BUILD_ROOT/%{dracutlibdir}/dracut-version.sh
 
-%if 0%{?fedora} == 0
-rm -fr $RPM_BUILD_ROOT/%{_datadir}/dracut/modules.d/01fips
+%if 0%{?fedora} == 0 && 0%{?rhel} == 0
+rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/01fips
+rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/02fips-aesni
 %endif
 
 # remove gentoo specific modules
-rm -fr $RPM_BUILD_ROOT/%{_datadir}/dracut/modules.d/50gensplash
+rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/50gensplash
+
+%if %{defined _unitdir}
+# with systemd IMA and selinux modules do not make sense
+rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/96securityfs
+rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/97masterkey
+rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/98integrity
+rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/98selinux
+%endif
 
 mkdir -p $RPM_BUILD_ROOT/boot/dracut
 mkdir -p $RPM_BUILD_ROOT/var/lib/dracut/overlay
@@ -188,7 +202,7 @@ mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/log
 touch $RPM_BUILD_ROOT%{_localstatedir}/log/dracut.log
 mkdir -p $RPM_BUILD_ROOT%{_sharedstatedir}/initramfs
 
-%if 0%{?fedora}
+%if 0%{?fedora} || 0%{?rhel}
 install -m 0644 dracut.conf.d/fedora.conf.example $RPM_BUILD_ROOT/etc/dracut.conf.d/01-dist.conf
 install -m 0644 dracut.conf.d/fips.conf.example $RPM_BUILD_ROOT/etc/dracut.conf.d/40-fips.conf
 %endif
@@ -198,12 +212,16 @@ install -m 0644 dracut.conf.d/suse.conf.example   $RPM_BUILD_ROOT/etc/dracut.con
 %endif
 
 %if 0%{?fedora} <= 12 && 0%{?rhel} < 6 && 0%{?suse_version} <= 9999
-rm $RPM_BUILD_ROOT/sbin/mkinitrd
-rm $RPM_BUILD_ROOT/sbin/lsinitrd
+rm $RPM_BUILD_ROOT%{_bindir}/mkinitrd
+rm $RPM_BUILD_ROOT%{_bindir}/lsinitrd
 %endif
 
-mkdir -p $RPM_BUILD_ROOT/etc/logrotate.d/dracut
-install -m 0644 dracut.logrotate $RPM_BUILD_ROOT/etc/logrotate.d/dracut
+mkdir -p $RPM_BUILD_ROOT/etc/logrotate.d
+install -m 0644 dracut.logrotate $RPM_BUILD_ROOT/etc/logrotate.d/dracut_log
+
+# create compat symlink
+mkdir -p $RPM_BUILD_ROOT/sbin
+ln -s /usr/bin/dracut $RPM_BUILD_ROOT/sbin/dracut
 
 %clean
 rm -rf $RPM_BUILD_ROOT
@@ -211,88 +229,114 @@ rm -rf $RPM_BUILD_ROOT
 %files
 %defattr(-,root,root,0755)
 %doc README HACKING TODO COPYING AUTHORS NEWS dracut.html dracut.png dracut.svg
+%{_bindir}/dracut
+# compat symlink
 /sbin/dracut
-%if 0%{?with_switch_root}
-/sbin/switch_root
-%endif
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
-/sbin/mkinitrd
-/sbin/lsinitrd
+%{_bindir}/mkinitrd
+%{_bindir}/lsinitrd
 %endif
-%dir %{_datadir}/dracut
-%dir %{_datadir}/dracut/modules.d
-%{_datadir}/dracut/dracut-functions
-%{_datadir}/dracut/dracut-logger
+%dir %{dracutlibdir}
+%dir %{dracutlibdir}/modules.d
+%{dracutlibdir}/dracut-functions.sh
+%{dracutlibdir}/dracut-functions
+%{dracutlibdir}/dracut-version.sh
+%{dracutlibdir}/dracut-logger.sh
+%{dracutlibdir}/dracut-initramfs-restore
 %config(noreplace) /etc/dracut.conf
-%if 0%{?fedora} || 0%{?suse_version}
-%config(noreplace) /etc/dracut.conf.d/01-dist.conf
+%if 0%{?fedora} || 0%{?suse_version} || 0%{?rhel}
+%config /etc/dracut.conf.d/01-dist.conf
 %endif
 %dir /etc/dracut.conf.d
-%config(noreplace) /etc/logrotate.d/dracut
 %{_mandir}/man8/dracut.8*
 %{_mandir}/man7/dracut.kernel.7*
+%{_mandir}/man7/dracut.cmdline.7*
 %{_mandir}/man5/dracut.conf.5*
-%{_datadir}/dracut/modules.d/00bootchart
-%{_datadir}/dracut/modules.d/00dash
-%{_datadir}/dracut/modules.d/05busybox
-%{_datadir}/dracut/modules.d/10i18n
-%{_datadir}/dracut/modules.d/10rpmversion
-%{_datadir}/dracut/modules.d/50plymouth
-%{_datadir}/dracut/modules.d/60xen
-%{_datadir}/dracut/modules.d/90btrfs
-%{_datadir}/dracut/modules.d/90crypt
-%{_datadir}/dracut/modules.d/90dm
-%{_datadir}/dracut/modules.d/90dmraid
-%{_datadir}/dracut/modules.d/90dmsquash-live
-%{_datadir}/dracut/modules.d/90kernel-modules
-%{_datadir}/dracut/modules.d/90lvm
-%{_datadir}/dracut/modules.d/90mdraid
-%{_datadir}/dracut/modules.d/90multipath
-%{_datadir}/dracut/modules.d/95debug
-%{_datadir}/dracut/modules.d/95resume
-%{_datadir}/dracut/modules.d/95rootfs-block
-%{_datadir}/dracut/modules.d/95dasd
-%{_datadir}/dracut/modules.d/95dasd_mod
-%{_datadir}/dracut/modules.d/95fstab-sys
-%{_datadir}/dracut/modules.d/95zfcp
-%{_datadir}/dracut/modules.d/95terminfo
-%{_datadir}/dracut/modules.d/95udev-rules
-%{_datadir}/dracut/modules.d/97biosdevname
-%{_datadir}/dracut/modules.d/98selinux
-%{_datadir}/dracut/modules.d/98syslog
-%{_datadir}/dracut/modules.d/99base
-# logfile needs no logrotate, because it gets overwritten
-# for every dracut run
+%{dracutlibdir}/modules.d/00bootchart
+%{dracutlibdir}/modules.d/00dash
+%{dracutlibdir}/modules.d/05busybox
+%{dracutlibdir}/modules.d/10i18n
+%{dracutlibdir}/modules.d/30convertfs
+%{dracutlibdir}/modules.d/45url-lib
+%{dracutlibdir}/modules.d/50plymouth
+%{dracutlibdir}/modules.d/80cms
+%{dracutlibdir}/modules.d/90btrfs
+%{dracutlibdir}/modules.d/90crypt
+%{dracutlibdir}/modules.d/90dm
+%{dracutlibdir}/modules.d/90dmraid
+%{dracutlibdir}/modules.d/90dmsquash-live
+%{dracutlibdir}/modules.d/90kernel-modules
+%{dracutlibdir}/modules.d/90lvm
+%{dracutlibdir}/modules.d/90mdraid
+%{dracutlibdir}/modules.d/90multipath
+%{dracutlibdir}/modules.d/91crypt-gpg
+%{dracutlibdir}/modules.d/95debug
+%{dracutlibdir}/modules.d/95resume
+%{dracutlibdir}/modules.d/95rootfs-block
+%{dracutlibdir}/modules.d/95dasd
+%{dracutlibdir}/modules.d/95dasd_mod
+%{dracutlibdir}/modules.d/95fstab-sys
+%{dracutlibdir}/modules.d/95zfcp
+%{dracutlibdir}/modules.d/95terminfo
+%{dracutlibdir}/modules.d/95udev-rules
+%{dracutlibdir}/modules.d/95virtfs
+%if %{undefined _unitdir}
+%{dracutlibdir}/modules.d/96securityfs
+%{dracutlibdir}/modules.d/97masterkey
+%{dracutlibdir}/modules.d/98selinux
+%{dracutlibdir}/modules.d/98integrity
+%endif
+%{dracutlibdir}/modules.d/97biosdevname
+%{dracutlibdir}/modules.d/98ecryptfs
+%{dracutlibdir}/modules.d/98pollcdrom
+%{dracutlibdir}/modules.d/98syslog
+%{dracutlibdir}/modules.d/98systemd
+%{dracutlibdir}/modules.d/98usrmount
+%{dracutlibdir}/modules.d/99base
+%{dracutlibdir}/modules.d/99fs-lib
+%{dracutlibdir}/modules.d/99img-lib
+%{dracutlibdir}/modules.d/99shutdown
+%config(noreplace) /etc/logrotate.d/dracut_log
 %attr(0644,root,root) %ghost %config(missingok,noreplace) %{_localstatedir}/log/dracut.log
 %dir %{_sharedstatedir}/initramfs
+%if %{defined _unitdir}
+%{_unitdir}/*.service
+%{_unitdir}/*.target
+%{_unitdir}/*/*.service
+%endif
 
 %files network
 %defattr(-,root,root,0755)
-%{_datadir}/dracut/modules.d/40network
-%{_datadir}/dracut/modules.d/95fcoe
-%{_datadir}/dracut/modules.d/95iscsi
-%{_datadir}/dracut/modules.d/95nbd
-%{_datadir}/dracut/modules.d/95nfs
-%{_datadir}/dracut/modules.d/45ifcfg
-%{_datadir}/dracut/modules.d/95znet
+%{dracutlibdir}/modules.d/40network
+%{dracutlibdir}/modules.d/95fcoe
+%{dracutlibdir}/modules.d/95iscsi
+%{dracutlibdir}/modules.d/90livenet
+%{dracutlibdir}/modules.d/95nbd
+%{dracutlibdir}/modules.d/95nfs
+%{dracutlibdir}/modules.d/95ssh-client
+%{dracutlibdir}/modules.d/45ifcfg
+%{dracutlibdir}/modules.d/95znet
 
-%if 0%{?fedora}
+%if 0%{?fedora} || 0%{?rhel}
 %files fips
 %defattr(-,root,root,0755)
-%{_datadir}/dracut/modules.d/01fips
+%{dracutlibdir}/modules.d/01fips
 %config(noreplace) /etc/dracut.conf.d/40-fips.conf
 %endif
 
+%files fips-aesni
+%defattr(-,root,root,0755)
+%doc COPYING
+%{dracutlibdir}/modules.d/02fips-aesni
+
 %files caps
 %defattr(-,root,root,0755)
-%{_datadir}/dracut/modules.d/02caps
+%{dracutlibdir}/modules.d/02caps
 
-%files tools 
+%files tools
 %defattr(-,root,root,0755)
-%{_mandir}/man8/dracut-gencmdline.8*
 %{_mandir}/man8/dracut-catimages.8*
-/sbin/dracut-gencmdline
-/sbin/dracut-catimages
+%{_bindir}/dracut-catimages
 %dir /boot/dracut
 %dir /var/lib/dracut
 %dir /var/lib/dracut/overlay

dracut.xml

@@ -1,725 +0,0 @@
-<?xml version='1.0' encoding='UTF-8'?>
-<!-- This document was created with Syntext Serna Free. -->
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" []>
-<book>
-  <title><inlinemediaobject>
-      <imageobject>
-        <imagedata valign="middle" fileref="dracut.png" format="PNG"/>
-      </imageobject>
-      <imageobject>
-        <imagedata valign="middle" fileref="dracut.svg" format="SVG"/>
-      </imageobject>
-      <imageobject>
-        <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="dracut.svg" encoding="UTF-8" parse="xml"/>
-      </imageobject>
-    </inlinemediaobject>dracut</title>
-  <bookinfo>
-    <author>
-      <firstname>Harald</firstname>
-      <surname>Hoyer</surname>
-    </author>
-    <pubdate>2010</pubdate>
-    <edition>Version 1.0</edition>
-    <copyright>
-      <year>2010</year>
-      <holder>Harald Hoyer</holder>
-    </copyright>
-    <legalnotice>
-      <para>
- This work is licensed under the Creative Commons Attribution/Share-Alike License. To view a copy of this license, visit <ulink url="http://creativecommons.org/licenses/by-sa/3.0/">http://creativecommons.org/licenses/by-sa/3.0/</ulink> or send a letter to Creative Commons, 559 Nathan Abbott Way, Stanford, California 94305, USA.
-      </para>
-    </legalnotice>
-  </bookinfo>
-  <toc/>
-  <chapter>
-    <chapterinfo>
-      <legalnotice>
-        <para>
- This section is a modified version of <ulink url="http://en.wikipedia.org/wiki/Initrd">http://en.wikipedia.org/wiki/Initrd</ulink>, which is licensed under the Creative Commons Attribution/Share-Alike License.
-      </para>
-      </legalnotice>
-    </chapterinfo>
-    <title>Introduction</title>
-    <section>
-      <title>Definition</title>
-      <para>An <emphasis>initial ramdisk</emphasis> is a temporary file system used in the boot process of the Linux kernel.  <emphasis>initrd</emphasis> and <emphasis>initramfs</emphasis> refer to slightly different schemes for loading this file system into memory.  Both are commonly used to make preparations before the real root file system can be mounted.</para>
-    </section>
-    <section>
-      <title>Rationale </title>
-      <para>Many Linux distributions ship a single, generic kernel image that is intended to boot as wide a variety of hardware as possible.  The device drivers for this generic kernel image are included as loadable modules, as it is not possible to statically compile them all into the one kernel without making it too large to boot from computers with limited memory or from lower-capacity media like floppy disks.
-        </para>
-      <para>This then raises the problem of detecting and loading the modules necessary to mount the root file system at boot time (or, for that matter, deducing where or what the root file system is).
-        </para>
-      <para>To further complicate matters, the root file system may be on a software <acronym>RAID</acronym> volume, <acronym>LVM</acronym>, <acronym>NFS</acronym> (on diskless workstations), or on an encrypted partition.  All of these require special preparations to mount.
-        </para>
-      <para>Another complication is kernel support for hibernation, which suspends the computer to disk by dumping an image of the entire system to a swap partition or a regular file, then powering off.  On next boot, this image has to be made accessible before it can be loaded back into memory. </para>
-      <para>To avoid having to hardcode handling for so many special cases into the kernel, an initial boot stage with a temporary root file system—now dubbed early user space—is used.  This root file system would contain user-space helpers that would do the hardware detection, module loading and device discovery necessary to get the real root file system mounted.
-      </para>
-    </section>
-    <section>
-      <title>Implementation </title>
-      <para>An image of this initial root file system (along with the kernel image) must be stored somewhere accessible by the Linux bootloader or the boot firmware of the computer.  This can be: </para>
-      <itemizedlist>
-        <listitem>
-          <para>The root file system itself </para>
-        </listitem>
-        <listitem>
-          <para>A boot image on an optical disc
-   </para>
-        </listitem>
-        <listitem>
-          <para>A small ext2/ext3 or <acronym>FAT</acronym>-formatted partition on a local disk (a <emphasis>boot partition</emphasis>)</para>
-        </listitem>
-        <listitem>
-          <para>A <acronym>TFTP</acronym> server (on systems that can boot from Ethernet) </para>
-        </listitem>
-      </itemizedlist>
-      <para>The bootloader will load the kernel and initial root file system image into memory and then start the kernel, passing in the memory address of the image. 
-    </para>
-      <para>Depending on which algorithms were compiled statically into it, the kernel can currently unpack initrd/initramfs images compressed with gzip, bzip2 and <acronym>LZMA</acronym>. </para>
-    </section>
-    <section>
-      <title>Mount preparations </title>
-      <para>dracut can generate a customized initrams image which contains only whatever is necessary to boot some particular computer, such as <acronym>ATA</acronym>, <acronym>SCSI</acronym> and filesystem kernel modules (host-only mode).</para>
-      <para>dracut can also generate a more generic initramfs image (default mode).  </para>
-      <para>dracut&apos;s initramfs starts only with the device name of the root file system (or its <acronym>UUID</acronym>) and must discover everything else at boot time.  A complex cascade of tasks must be performed to get the root file system mounted: </para>
-      <itemizedlist>
-        <listitem>
-          <para>Any hardware drivers that the boot process depends on must be loaded.  All kernel modules for common storage devices are packed onto the initramfs and then udev pulls in modules matching the computer&apos;s detected hardware. </para>
-        </listitem>
-        <listitem>
-          <para>On systems which display a boot rd.splash screen, the video hardware must be initialized and a user-space helper started to paint animations onto the display in lockstep with the boot process. </para>
-        </listitem>
-        <listitem>
-          <para>If the root file system is on NFS, dracut does  then: <itemizedlist>
-              <listitem>
-                <para>Bring up the primary network interface. </para>
-              </listitem>
-              <listitem>
-                <para>Invoke a DHCP client, with which it can obtain a DHCP lease. </para>
-              </listitem>
-              <listitem>
-                <para>Extract the name of the NFS share and the address of the NFS server from the lease. </para>
-              </listitem>
-              <listitem>
-                <para>Mount the <acronym>NFS</acronym> share. </para>
-              </listitem>
-            </itemizedlist></para>
-        </listitem>
-        <listitem>
-          <para>If the root file system appears to be on a software <acronym>RAID</acronym> device, there is no way of knowing which devices the <acronym>RAID</acronym> volume spans; the standard <acronym>MD</acronym> utilities must be invoked to scan all available block devices with a raid signature and bring the required ones online. </para>
-        </listitem>
-        <listitem>
-          <para>If the root file system appears to be on a logical volume, the <acronym>LVM</acronym> utilities must be invoked to scan for and activate the volume group containing it. </para>
-        </listitem>
-        <listitem>
-          <para>If the root file system is on an encrypted block device: <itemizedlist>
-              <listitem>
-                <para>Invoke a helper script to prompt the user to type in a passphrase and/or insert a hardware token (such as a smart card or a <acronym>USB</acronym> security dongle). </para>
-              </listitem>
-              <listitem>
-                <para>Create a decryption target with the device mapper. </para>
-              </listitem>
-            </itemizedlist></para>
-        </listitem>
-      </itemizedlist>
-      <para>dracut uses udev, an event-driven hotplug agent, which invokes helper programs as hardware devices, disk partitions and storage volumes matching certain rules come online.  This allows discovery to run in parallel, and to progressively cascade into arbitrary nestings of <acronym>LVM</acronym>, <acronym>RAID</acronym> or encryption to get at the root file system. </para>
-      <para>When the root file system finally becomes visible: <itemizedlist>
-          <listitem>
-            <para>Any maintenance tasks which cannot run on a mounted root file system are done.  </para>
-          </listitem>
-          <listitem>
-            <para>The root file system is mounted read-only. </para>
-          </listitem>
-          <listitem>
-            <para>Any processes which must continue running (such as the rd.splash screen helper and its command <acronym>FIFO</acronym>) are hoisted into the newly-mounted root file system. </para>
-          </listitem>
-        </itemizedlist></para>
-      <para>The final root file system cannot simply be mounted over /, since that would make the scripts and tools on the initial root file system inaccessible for any final cleanup tasks. On an initramfs, the initial root file system cannot be rotated away. Instead, it is simply emptied and the final root file system mounted over the top.
-    </para>
-    </section>
-  </chapter>
-  <chapter>
-    <title>User Manual</title>
-    <section>
-      <title>Creating an initramfs Image</title>
-      <para>To create a initramfs image, the most simple command is:</para>
-      <screen># dracut</screen>
-      <para>This will generate a general purpose initramfs image, with all possible functionality resulting of  the combination of the installed dracut modules and system tools. The image is /boot/initramfs-<replaceable>&lt;kernel version&gt;</replaceable>.img and contains the kernel modules of the currently active kernel with version <replaceable>&lt;kernel version&gt;</replaceable>.</para>
-      <para>If the initramfs image already exists, dracut will display an error message, and to overwrite the existing image, you have to use the <option>--force</option> option. </para>
-      <screen># dracut --force</screen>
-      <para>If you want to specify another filename for the resulting image you would issue a command like:</para>
-      <screen># dracut foobar.img</screen>
-      <para>To generate an image for a specific kernel version, the command would be:</para>
-      <screen># dracut foobar.img 2.6.40-1.rc5.f20</screen>
-      <para>A shortcut to generate the image at the default location for a specific kernel version is:</para>
-      <screen># dracut &apos;&apos; 2.6.40-1.rc5.f20</screen>
-      <para>If you want to create lighter, smaller initramfs images, you may want to specify the <option>--host-only</option> or  <option>-H</option> option. Using this option, the resulting image will contain only those dracut modules, kernel modules and filesystems, which are needed to boot this specific machine. This has the drawback, that you can&apos;t put the disk on another controller or machine, and that you can&apos;t switch to another root filesystem, without recreating the initramfs image. The usage of the <option>--host-only</option> option is only for experts and you will have to keep the broken pieces. At least keep a copy of a general purpose image (and corresponding kernel) as a fallback to rescue your system.</para>
-      <section>
-        <title>Inspecting the Contents</title>
-        <para>To see the contents of the image created by dracut, you can use the <command>lsinitrd</command> tool.</para>
-        <screen># lsinitrd /boot/initramfs-$(uname -r).img | less</screen>
-        <para>To display the contents of a file in the initramfs also use the <command>lsinitrd</command> tool:</para>
-        <screen># lsinitrd /boot/initramfs-$(uname -r).img  /etc/ld.so.conf
-include ld.so.conf.d/*.conf</screen>
-      </section>
-      <section>
-        <title>Adding dracut Modules</title>
-        <para>Some dracut modules are turned off by default and have to be activated manually. You can do this by adding the dracut modules to the configuration file <filename>/etc/dracut.conf</filename> or <filename>/etc/dracut.conf.d/myconf.conf</filename>. See the man page <xref linkend="dracutconf5"/>. You can also add dracut modules on the command line by using the <option>-a</option> or <option>--add</option> option:</para>
-        <screen># dracut --add bootchart initramfs-bootchart.img</screen>
-        <para>To see a list of available dracut modules, use the <option>--list-modules</option> option:</para>
-        <screen># dracut --list-modules</screen>
-        <para>or, if you have a dracut version earlier than <literal>008</literal>, issue the command:</para>
-        <screen># for mod in /usr/share/dracut/modules.d/*; do echo ${mod##*/??}; done</screen>
-      </section>
-      <section>
-        <title>Omitting dracut Modules</title>
-        <para>Sometimes you don&apos;t want a dracut module to be included for reasons of speed, size or functionality. To do this, either specify the <envar>omit_dracutmodules</envar> variable in  the <filename>dracut.conf</filename> or <filename>/etc/dracut.conf.d/myconf.conf</filename> configuration file (see man page <xref linkend="dracutconf5"/>), or use the <option>-o</option> or <option>--omit</option> option on the command line:</para>
-        <screen># dracut -o &quot;multipath lvm&quot; no-multipath-lvm.img</screen>
-      </section>
-      <section>
-        <title>Adding Kernel Modules</title>
-        <para>If you need a special kernel module in the initramfs, which is not automatically picked up by dracut, you have the use the <option>--add-drivers</option> option on the command line or  the drivers vaiable in  the <filename>/etc/dracut.conf</filename> or <filename>/etc/dracut.conf.d/myconf.conf</filename> configuration file (see man page <xref linkend="dracutconf5"/>):</para>
-        <screen># dracut --add-drivers mymod initramfs-with-mymod.img</screen>
-      </section>
-    </section>
-    <section>
-      <title>Boot parameters</title>
-      <para>The generated initramfs.img file normally does not contain any system configuration files (except for some special exceptions), so the configuration has to be done on the kernel command line. With this flexibility, you can easily boot from a changed root partition, without the need to recompile the initramfs image. So, you could completly change your root partition (move it inside a md raid with encryption and LVM on top), as long as you specify the correct filesystem <varname>LABEL</varname> or <varname>UUID</varname> on the kernel command line for your root device, dracut will find it and boot from it.</para>
-      <para>The kernel command line usually can be configured in <filename>/boot/grub/grub.conf</filename>, if grub is your bootloader and it also can be edited in the real boot process in the grub menu.</para>
-      <para>The kernel command line can also be provided by the dhcp server with the root-path option. See <xref linkend="NetworkBoot"/>.</para>
-      <para>For a full reference of all kernel command line parameters, see the <xref linkend="dracutconf5"/> or <xref linkend="dracut8"/> man page.</para>
-      <section>
-        <title>Specifying the root Device</title>
-        <para>This is the only option dracut really needs to boot from your root partition. Because your root partition can live in various environments, there are a lot of formats for the <envar>root=</envar> option. The most basic one is <envar>root=<replaceable>&lt;path to device node&gt;</replaceable></envar>:</para>
-        <screen>root=/dev/sda2</screen>
-        <para>Because device node names can change, dependent on the drive ordering,  you are encouraged to use the filesystem identifier (UUID) or filesystem label (LABEL) to specify your root partition:</para>
-        <screen>root=UUID=19e9dda3-5a38-484d-a9b0-fa6b067d0331</screen>
-        <para>or</para>
-        <screen>root=LABEL=myrootpartitionlabel</screen>
-        <para>To see all <envar>UUID</envar>s or <envar>LABEL</envar>s on your system, do:</para>
-        <screen># ls -l /dev/disk/by-uuid</screen>
-        <para>or</para>
-        <screen># ls -l /dev/disk/by-label</screen>
-        <para>If your root partition is on the network see <xref linkend="NetworkBoot"/>.</para>
-      </section>
-      <section>
-        <title>Keyboard Settings</title>
-        <para>If you have to input passwords for encrypted disk volumes, you might want to set the keyboard layout and specify a display font.</para>
-        <para>A typical german kernel command would contain:</para>
-        <screen>vconsole.font=latarcyrheb-sun16 vconsole.keymap=de-latin1-nodeadkeys locale.LANG=de_DE.UTF-8</screen>
-        <para>Setting these options can override the setting stored on your system, if you use a modern init system, like systemd.</para>
-        <para>For dracut versions prior to version <literal>008</literal> the line would look like:</para>
-        <screen>LANG=de_DE.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=de-latin1-nodeadkeys</screen>
-      </section>
-      <section>
-        <title>Blacklisting Kernel Modules</title>
-        <para>Sometimes it is required to prevent the automatic kernel module loading of a specific kernel module. To do this, just add <envar>rd.blacklist=<replaceable>&lt;kernel module name&gt;</replaceable></envar>, with <replaceable>&lt;kernel module name&gt;</replaceable> not containing the <filename>.ko</filename> suffix, to the kernel command line. For example:</para>
-        <screen>rd.blacklist=mptsas rd.blacklist=nouveau</screen>
-        <para>The option can be specified multiple times on the kernel command line.</para>
-      </section>
-      <section>
-        <title>Speeding up the Boot Process</title>
-        <para>If you want to speed up the boot process, you can specify as much information for dracut on the kernel command as possible. For example, you can tell dracut, that you root partition is not on a <acronym>LVM</acronym> volume or not on a raid partition, or that it lives inside a specific crypto <acronym>LUKS</acronym> encrypted volume. By default, dracut searches everywhere. A typical dracut kernel command line for a plain primary or logical partition would contain:</para>
-        <screen>rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0</screen>
-        <para>on systems with dracut version prior to <literal>008</literal> the line would look like:</para>
-        <screen>rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM</screen>
-        <para>This turns off every automatic assembly of <acronym>LVM</acronym>, <acronym>MD</acronym> raids, <acronym>DM</acronym> raids and crypto <acronym>LUKS</acronym>.</para>
-        <para>Of course, you could also omit the dracut modules in the initramfs creation process, but then you would lose the posibility to turn it on on demand.</para>
-      </section>
-      <section id="Injecting">
-        <title>Injecting custom Files</title>
-        <para>To add your own files to the initramfs image, you have several possibilities.</para>
-        <para>The <option>--include</option> option let you specify a source path and a target path. For example</para>
-        <screen># dracut --include cmdline-preset /etc/cmdline initramfs-cmdline-pre.img</screen>
-        <para>will create an initramfs image, where the file cmdline-preset will be copied inside the initramfs to  <filename>/etc/cmdline</filename>. <option>--include</option> can only be specified once.</para>
-        <screen># mkdir rd.live.overlay
-# mkdir rd.live.overlay/etc
-# mkdir rd.live.overlay/etc/conf.d
-# echo &quot;ip=auto&quot; &gt;&gt; rd.live.overlay/etc/cmdline
-# echo export TESTVAR=testtest &gt;&gt; rd.live.overlay/etc/conf.d/testvar.conf
-# echo export TESTVAR=testtest &gt;&gt; rd.live.overlay/etc/conf.d/testvar.conf
-# tree rd.live.overlay/
-rd.live.overlay/
-└── etc
-    ├── cmdline
-    └── conf.d
-        └── testvar.conf
-# dracut --include rd.live.overlay / initramfs-rd.live.overlay.img</screen>
-        <para>This will put the contents of the rd.live.overlay directory into the root of the initramfs image.</para>
-        <para>The <option>--install</option> option let you specify several files, which will get installed in the initramfs image at the same location, as they are present on initramfs creation time.</para>
-        <screen># dracut --install &apos;strace fsck.ext3 ssh&apos; initramfs-dbg.img</screen>
-        <para>This will create an initramfs with the <command>strace</command>, <command>fsck.ext3</command> and <command>ssh</command> executables, together with the libraries needed to start those. The <option>--install</option> option can be specified multiple times.</para>
-      </section>
-    </section>
-    <section id="NetworkBoot">
-      <title>Network Boot</title>
-      <para>If your root partition is on a network drive, you have to have the network dracut modules installed to create a network aware initramfs image.</para>
-      <para>On a Red Hat Enterprise Linux or Fedora system, this means, you have to install the <filename>dracut-network</filename> rpm package:</para>
-      <screen># yum install dracut-network</screen>
-      <para>The resulting initramfs image can be served by a boot manager residing on your local hard drive or it can be served by a <acronym>PXE</acronym>/<acronym>TFTP</acronym> server.</para>
-      <para>How to setup your <acronym>PXE</acronym>/<acronym>TFTP</acronym> server can be found in the <ulink url="http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/">Red Hat Enterprise Linux Storage Administration Guide</ulink>.</para>
-      <para>If you specify <envar>rd.ip=auto</envar> on the kernel command line,  then dracut asks a dhcp server about the ip adress for the machine. The dhcp server can also serve an additional root-path, which will set the root device for dracut.  With this mechanism, you have static configuration on your client machine and  a centralized boot configuration on your <acronym>TFTP</acronym>/<acronym>DHCP</acronym> server. If you can&apos;t pass a kernel command line, then you can inject <filename>/etc/cmdline</filename>, with a method described in <xref linkend="Injecting"/>.
-</para>
-      <section>
-        <title>Reducing the Image Size</title>
-        <para>To reduce the size of the initramfs, you should create it with by ommitting all dracut modules, which you know, you don&apos;t need to boot the machine.</para>
-        <para>You can also specify the exact dracut and kernel modules to produce a very tiny initramfs image.</para>
-        <para>For example for a <acronym>NFS</acronym> image, you would do:</para>
-        <screen># dracut -m &quot;nfs network  base&quot; initramfs-nfs-only.img</screen>
-        <para>Then you would boot from this image with your target machine and reduce the size once more by creating it  on the target machine with the <option>--host-only</option> option:</para>
-        <screen># dracut -m &quot;nfs network base&quot; --host-only initramfs-nfs-host-only.img</screen>
-        <para>This will reduce the size of the initramfs image significantly.</para>
-      </section>
-      <section>
-        <title>NFS Root Device</title>
-        <para/>
-      </section>
-      <section>
-        <title>iSCSI Root Device</title>
-        <para>
- </para>
-      </section>
-      <section>
-        <title>FCoE Root Device</title>
-        <para>
- </para>
-      </section>
-    </section>
-    <section>
-      <title>Troubleshooting</title>
-      <para>If the boot process does not succeed, you have several options to debug the situation. Some of the basic operations are covered here. For more information you should also visit:  <ulink url="http://fedoraproject.org/wiki/How_to_debug_Dracut_problems">http://fedoraproject.org/wiki/How_to_debug_Dracut_problems</ulink></para>
-      <section id="identifying-your-problem-area">
-        <title>Identifying your problem area</title>
-        <orderedlist>
-          <listitem>
-            <para>Remove &apos;&apos;rhgb&apos;&apos; and &apos;&apos;quiet&apos;&apos; from the kernel command line
-</para>
-          </listitem>
-          <listitem>
-            <para>Add &apos;&apos;rd.shell&apos;&apos; to the kernel command line.  This will present a shell should dracut be unable to locate your root device
-</para>
-          </listitem>
-          <listitem>
-            <para>Add &apos;&apos;rd.shell rd.debug&apos;&apos; to the kernel command line so that dracut shell commands are printed as they are executed
-</para>
-          </listitem>
-          <listitem>
-            <para>With dracut &gt;= 002-11, you can inspect the rd.debug output with:
-</para>
-            <screen># less /init.log
-# dmesg | less</screen>
-          </listitem>
-        </orderedlist>
-      </section>
-      <section id="information-to-include-in-your-report">
-        <title id="information-to-include-in-your-report-title">Information to include in your report</title>
-        <section id="all-bug-reports">
-          <title id="all-bug-reports-title">All bug reports</title>
-          <para>In all cases, the following should be mentioned and attached to your bug report:
-</para>
-          <itemizedlist>
-            <listitem>
-              <para>The exact kernel command-line used.  Typically from the bootloader configuration file (e.g. <filename>/etc/grub.conf</filename>) or from <filename>/proc/cmdline</filename>.</para>
-            </listitem>
-            <listitem>
-              <para>A copy of your disk partition information from <filename>/etc/fstab</filename>, which might be obtained booting an old working initramfs or a rescue medium.</para>
-            </listitem>
-            <listitem>
-              <para>A device listing from device-mapper.  This can be obtained by running the command <screen># dmsetup ls --tree</screen></para>
-            </listitem>
-            <listitem>
-              <para>A list of block device attributes including vol_id compatible mode.  This can be obtained by running the commands: <screen># blkid -p
-# blkid -p -o udev</screen></para>
-            </listitem>
-            <listitem>
-              <para>Turn on dracut debugging (see <filename>the &apos;debugging dracut&apos; section</filename>), and attach all relevant information from the boot log.  This can be obtained by running the command <screen># dmesg|grep dracut</screen></para>
-            </listitem>
-            <listitem>
-              <para>If you use a dracut configuration file, please include <filename>/etc/dracut.conf</filename>
- and all files in <filename>/etc/dracut.conf.d/*.conf</filename></para>
-            </listitem>
-          </itemizedlist>
-        </section>
-        <section id="logical-volume-management-related-problems">
-          <title id="logical-volume-management-related-problems-title">Logical Volume Management related problems</title>
-          <para>As well as the information from <xref linkend="all-bug-reports"/> include the following information:
-</para>
-          <itemizedlist>
-            <listitem>
-              <para>Include physical volume information by running the command: <screen># lvm pvdisplay</screen></para>
-            </listitem>
-            <listitem>
-              <para>Include volume group information by running the command: <screen># lvm vgdisplay</screen></para>
-            </listitem>
-            <listitem>
-              <para>Include logical volume information by running the command: <screen># lvm lvdisplay</screen></para>
-            </listitem>
-          </itemizedlist>
-        </section>
-        <section id="software-raid-related-problems">
-          <title id="software-raid-related-problems-title">Software RAID related problems</title>
-          <para>As well as the information from <xref linkend="all-bug-reports"/>, include the following information:
-</para>
-          <itemizedlist>
-            <listitem>
-              <para>If using software RAID disk partitions, please include the output of <screen># cat /proc/mdstat</screen></para>
-            </listitem>
-          </itemizedlist>
-        </section>
-        <section id="network-root-device-related-problems">
-          <title id="network-root-device-related-problems-title">Network root device related problems</title>
-          <para>This section details information to include when experiencing problems on a system whose root device is located on a network attached volume (e.g. iSCSI, NFS or NBD).  As well as the information from <xref linkend="all-bug-reports"/>, include the following information:
-</para>
-          <itemizedlist>
-            <listitem>
-              <para>Please include the output of  <screen># /sbin/ifup <replaceable>&lt;interfacename&gt;</replaceable>
-# ip addr show</screen></para>
-            </listitem>
-          </itemizedlist>
-        </section>
-      </section>
-      <section id="debugging-dracut">
-        <title id="debugging-dracut-title">Debugging dracut</title>
-        <section id="configure-a-serial-console">
-          <title id="configure-a-serial-console-title">Configure a serial console</title>
-          <para>Successfully debugging dracut will require some form of console logging during the system boot.  This section documents configuring a serial console connection to record boot messages.
-</para>
-          <orderedlist>
-            <listitem>
-              <para>First, enable serial console output for both the kernel and the bootloader.
-</para>
-            </listitem>
-            <listitem>
-              <para>Open the file <filename>/etc/grub.conf</filename> for editing.  Below the line &apos;&apos;timeout=5&apos;&apos;, add the following:
-<screen>serial --unit=0 --speed=9600
-terminal --timeout=5 serial console</screen></para>
-            </listitem>
-            <listitem>
-              <para>Also in <filename>/etc/grub.conf</filename>, add the following boot arguemnts to the &apos;&apos;kernel&apos;&apos; line:
-<screen>console=tty0 console=ttyS0,9600</screen></para>
-            </listitem>
-            <listitem>
-              <para>When finished, the <filename>/etc/grub.conf</filename> file should look similar to the example below.
-<screen>default=0
-timeout=5
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-title Fedora (2.6.29.5-191.fc11.x86_64)
-  root (hd0,0)
-  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 console=ttyS0,9600
-  initrd /dracut-2.6.29.5-191.fc11.x86_64.img</screen></para>
-            </listitem>
-            <listitem>
-              <para>More detailed information on how to configure the kernel for console output can be found at <ulink url="http://www.faqs.org/docs/Linux-HOWTO/Remote-Serial-Console-HOWTO.html#CONFIGURE-KERNEL">http://www.faqs.org/docs/Linux-HOWTO/Remote-Serial-Console-HOWTO.html#CONFIGURE-KERNEL</ulink>.
-</para>
-            </listitem>
-          </orderedlist>
-          <note>
-            <title>Redirecting non-interactive output</title>
-            <para>You can redirect all non-interactive output to <filename>/dev/kmsg</filename> and the kernel will put it out on the console when it reaches the kernel buffer by doing<screen># exec &gt;/dev/kmsg 2&gt;&amp;1 &lt;/dev/console</screen></para>
-          </note>
-        </section>
-        <section id="using-the-dracut-shell">
-          <title id="using-the-dracut-shell-title">Using the dracut shell</title>
-          <para>Dracut offers a shell for interactive debugging in the event dracut fails to locate your root filesystem.  To enable the shell:
-<orderedlist>
-              <listitem>
-                <para>Add the boot parameter &apos;&apos;rd.shell&apos;&apos; to your bootloader configuration file (e.g. <filename>/etc/grub.conf</filename>)</para>
-              </listitem>
-              <listitem>
-                <para>Remove the boot arguments &apos;&apos;rhgb&apos;&apos; and &apos;&apos;quiet&apos;&apos;
-</para>
-                <para>
-A sample <filename>/etc/grub.conf</filename> bootloader configuration file is listed below. 
-</para>
-                <para><screen>default=0
-timeout=5
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-title Fedora (2.6.29.5-191.fc11.x86_64)
-  root (hd0,0)
-  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 rd.shell 
-  initrd /dracut-2.6.29.5-191.fc11.x86_64.img</screen></para>
-              </listitem>
-              <listitem>
-                <para>If system boot fails, you will be dropped into a shell as seen in the example below.
-<screen>No root device found 
-Dropping to debug shell.
-
-sh: can&apos;t access tty; job control turned off
-
-# </screen></para>
-              </listitem>
-              <listitem>
-                <para>Use this shell prompt to gather the information requested above (see <xref linkend="all-bug-reports"/>).
-</para>
-              </listitem>
-            </orderedlist></para>
-        </section>
-        <section id="accessing-the-root-volume-from-the-dracut-shell">
-          <title id="accessing-the-root-volume-from-the-dracut-shell-title">Accessing the root volume from the dracut shell</title>
-          <para>From the dracut debug shell, you can manually perform the task of locating and preparing your root volume for boot.  The required steps will depend on how your root volume is configured.  Common scenarios include:
-</para>
-          <itemizedlist>
-            <listitem>
-              <para>A block device (e.g. <filename>/dev/sda7</filename>)
-</para>
-            </listitem>
-            <listitem>
-              <para>A LVM logical volume (e.g. <filename>/dev/VolGroup00/LogVol00</filename>)
-</para>
-            </listitem>
-            <listitem>
-              <para>An encrypted device (e.g. <filename>/dev/mapper/luks-4d5972ea-901c-4584-bd75-1da802417d83</filename>)
-</para>
-            </listitem>
-            <listitem>
-              <para>A network attached device (e.g. netroot=iscsi:@192.168.0.4::3260::iqn.2009-02.org.fedoraproject:for.all)
-</para>
-            </listitem>
-          </itemizedlist>
-          <para>The exact method for locating and preparing will vary. However, to continue with a successful boot, the objective is to locate your root volume and create a symlink <filename>/dev/root</filename> which points to the file system. For example, the following example demonstrates accessing and booting a root volume that is an encrypted LVM Logical volume. </para>
-          <orderedlist>
-            <listitem>
-              <para>Inspect your partitions using <command>parted</command><screen># parted /dev/sda -s p
-Model: ATA HTS541060G9AT00 (scsi)
-Disk /dev/sda: 60.0GB
-Sector size (logical/physical): 512B/512B
-Partition Table: msdos
-Number  Start   End     Size    Type      File system  Flags
-1      32.3kB  10.8GB  107MB   primary   ext4         boot
-2      10.8GB  55.6GB  44.7GB  logical                lvm</screen></para>
-            </listitem>
-            <listitem>
-              <para>You recall that your root volume was a LVM logical volume.  Scan and activate any logical volumes.
-                  <screen># lvm vgscan
-# lvm vgchange -ay</screen></para>
-            </listitem>
-            <listitem>
-              <para>You should see any logical volumes now using the command <command>blkid</command>:
-<screen># blkid
-/dev/sda1: UUID=&quot;3de247f3-5de4-4a44-afc5-1fe179750cf7&quot; TYPE=&quot;ext4&quot;
-/dev/sda2: UUID=&quot;Ek4dQw-cOtq-5MJu-OGRF-xz5k-O2l8-wdDj0I&quot; TYPE=&quot;LVM2_member&quot;
-/dev/mapper/linux-root: UUID=&quot;def0269e-424b-4752-acf3-1077bf96ad2c&quot; TYPE=&quot;crypto_LUKS&quot;
-/dev/mapper/linux-home: UUID=&quot;c69127c1-f153-4ea2-b58e-4cbfa9257c5e&quot; TYPE=&quot;ext3&quot;
-/dev/mapper/linux-swap: UUID=&quot;47b4d329-975c-4c08-b218-f9c9bf3635f1&quot; TYPE=&quot;swap&quot;
-</screen></para>
-            </listitem>
-            <listitem>
-              <para>From the output above, you recall that your root volume exists on an encrypted block device.  Following the guidance disk encryption guidance from the Installation Guide, you unlock your encrypted root volume.
-<screen># UUID=$(cryptsetup luksUUID /dev/mapper/linux-root)
-# cryptsetup luksOpen /dev/mapper/linux-root luks-$UUID
-Enter passphrase for /dev/mapper/linux-root:
-Key slot 0 unlocked. </screen></para>
-            </listitem>
-            <listitem>
-              <para>Next, make a symbolic link to the unlocked root volume
-<screen># ln -s /dev/mapper/luks-$UUID /dev/root</screen></para>
-            </listitem>
-            <listitem>
-              <para>With the root volume available, you may continue booting the system by exiting the dracut shell
-<screen># exit</screen></para>
-            </listitem>
-          </orderedlist>
-        </section>
-        <section id="additional-dracut-boot-parameters">
-          <title id="additional-dracut-boot-parameters-title">Additional dracut boot parameters</title>
-          <para>For more debugging options, see <xref linkend="dracut-kernel-debug"/> in the man page <xref linkend="dracutkernel7"/>.</para>
-        </section>
-      </section>
-    </section>
-  </chapter>
-  <chapter>
-    <title>Developer Manual</title>
-    <section>
-      <title>dracut Components</title>
-      <para>dracut uses a modular system to build and extend the initramfs image. All modules are located in <filename>/usr/share/dracut/modules.d</filename> or in <filename><replaceable>&lt;git-src&gt;</replaceable>/modules.d</filename>. The most basic dracut module is <filename>99base</filename>. In <filename>99base</filename> the initial shell script <command>init</command> is defined, which gets run by the kernel after initramfs loading. Although you can replace <command>init</command> with your own version of <filename>99base</filename>, this is not encouraged. Instead you should use, if possible, the hooks of dracut. All hooks, and the point of time in which they are executed, are described in <xref linkend="stages"/>.</para>
-      <para>The main script, which creates the initramfs is <command>dracut</command> itsself. It parses all arguments and sets up the directory, in which everything is installed. It then executes all <command>check</command>, <command>install</command>, <command>installkernel</command> scripts found in the modules, which are to be processed. After everything is installed, the install directory is archived and compressed to the final initramfs image. All helper functions used by <command>check</command>, <command>install</command> and <command>installkernel</command> are found in in the file <filename>dracut-functions</filename>. These shell functions are available to all module installer (<command>install</command>, <command>installkernel</command>) scripts, without the need to source <filename>dracut-functions</filename>.</para>
-      <para>A module can check the preconditions for <command>install</command> and <command>installkernel</command> with the <command>check</command> script. Also dependencies can be expressed with <command>check</command>. If a module passed <command>check</command>, <command>install</command> and <command>installkernel</command> will be called to install all of the necessary files for the module. To split between kernel and non-kernel parts of the installation, all kernel module related parts have to be in <command>installkernel</command>. All other files found in a module directory are module specific and mostly are hook scripts and udev rules.</para>
-    </section>
-    <section id="stages">
-      <title>Boot Process Stages</title>
-      <para>The <command>init</command> script in <filename>99base</filename> is the main script, which prepares the root file system for usage, runs udev, mounts the real root device, kills the remaining processes, and switches to the real root device for further booting. dracut modules can insert custom script at various points, to control the boot process. These hooks are plain directories containing shell scripts ending with &quot;.sh&quot;, which are sourced by <command>init</command>.
-Common used functions are in <filename>dracut-lib.sh</filename>, which can be sourced by any script.      </para>
-      <section>
-        <title>Basic Setup</title>
-        <para>The first thing <command>init</command> does, is to mount <filename>/proc</filename> and <filename>/sys</filename> and manually create the basic device nodes and symbolic links in <filename>/dev</filename> needed to execute basic commands. Then logging is setup according to kernel command line arguments. <filename>/dev/pts</filename> and <filename>/dev/shm</filename> are mounted and the first hook is sourced.</para>
-      </section>
-      <section>
-        <title>Hook: cmdline</title>
-        <para>The <literal>
-            <function>cmdline</function>
-          </literal> hook is a place to insert scripts to parse the kernel command line and prepare the later actions, like setting up udev rules and configuration files.</para>
-        <para>In this hook the most important environment variable is defined: <envar>root</envar>. The second one is <envar>rootok</envar>, which indicates, that a module claimed to be able to parse the <envar>root</envar> defined. So for example, <envar>root=</envar><replaceable>iscsi:....</replaceable> will be claimed by the <function>iscsi</function> dracut module, which then sets <envar>rootok</envar>.</para>
-      </section>
-      <section>
-        <title>Hook: pre-udev</title>
-        <para>This hook is executed right after the <function>cmdline</function> hook and a check if <envar>root</envar> and <envar>rootok</envar> were set. Here modules can take action with the final <envar>root</envar>, and before <command>udev</command> has been run.</para>
-      </section>
-      <section>
-        <title>Start Udev</title>
-        <para>Now <command>udev</command> is started and the logging for <command>udev</command> is setup.</para>
-      </section>
-      <section>
-        <title>Hook: pre-trigger</title>
-        <para>In this hook, you can set udev environment variables with <code>udevadm control --property=<envar>KEY</envar>=<replaceable>value</replaceable></code> or control the further execution of <command>udev</command> with <command>udevadm</command>.</para>
-      </section>
-      <section>
-        <title>Trigger Udev</title>
-        <para><command>udev</command> is triggered by calling <command>udevadm trigger</command>, which sends <constant>add</constant> events for all devices and subsystems.
- </para>
-      </section>
-      <section>
-        <title>Main Loop</title>
-        <para>Now the main loop of <command>99base/init</command> begins. Here we loop until <command>udev</command> has settled and all scripts in <filename>initqueue-finished</filename> returned true. In this loop there are three hooks, where scripts can be inserted by calling <command>/sbin/initqueue</command>.
- </para>
-        <section>
-          <title>Initqueue</title>
-          <para>This hook gets executed every time a script is inserted here, regardless of the <command>udev</command> state.</para>
-        </section>
-        <section>
-          <title>Initqueue settled</title>
-          <para>This hooks gets executed every time <command>udev</command> has settled.</para>
-        </section>
-        <section>
-          <title>Initqueue finished</title>
-          <para>This hook is called after <command>udev</command> has settled and if all scripts herein return <errorcode>0</errorcode> the main loop will be ended.</para>
-        </section>
-      </section>
-      <section>
-        <title>Hook: pre-mount</title>
-        <para>Before the root device is mounted all scripts in the hook pre-mount are executed. In some cases (e.g. <acronym>NFS</acronym>) the real root device is already mounted, though.</para>
-      </section>
-      <section>
-        <title>Hook: mount</title>
-        <para>This hook is mainly to mount the real root device.</para>
-      </section>
-      <section>
-        <title>Hook: pre-pivot</title>
-        <para>This hook is the last hook and is called before init finally switches root to the real root device. This is a good place to clean up and kill processes not needed anymore.</para>
-      </section>
-      <section>
-        <title>Cleanup and switch_root</title>
-        <para>Init kills all <command>udev</command> processes, cleans up the environment, sets up the arguments for the real <command>init</command> process and finally calls <command>switch_root</command>. <command>switch_root</command> removes the whole filesystem hierarchy of the initramfs, chroot()s to the real root device and calls <command>/sbin/init</command> with the specified arguments.</para>
-        <para>To ensure all files in the initramfs hierarchy can be removed, all processes still running from the initramfs should not  have any open file descriptors left.</para>
-      </section>
-    </section>
-    <section>
-      <title>Network Infrastructure</title>
-      <para>
-      </para>
-    </section>
-    <section>
-      <title>Writing a Module</title>
-      <para>A simple example module is <filename>96insmodpost</filename>, which modprobes a kernel module after udev has settled and the basic device drivers have been loaded.</para>
-      <para>All module installation information is in the file module-setup.sh.</para>
-      <para>First we create a <function>check()</function> function, which just exits with <errorcode>0</errorcode> indicating that this module should be included by default.</para>
-      <para><function>check()</function>:</para>
-      <programlisting>return 0</programlisting>
-      <para>The we create the <function>install()</function> function, which installs a cmdline hook with priority number 20 called <filename>parse-insmodpost.sh</filename>. It also installs the <filename>insmodpost.sh</filename> script in <filename>/sbin</filename>.</para>
-      <para><function>install()</function>:</para>
-      <programlisting>inst_hook cmdline 20 &quot;$moddir/parse-insmodpost.sh&quot;
-inst_simple &quot;$moddir/insmodpost.sh&quot; /sbin/insmodpost.sh</programlisting>
-      <para>The <filename>pase-instmodpost.sh</filename> parses the kernel command line for a argument <envar>rd.driver.post</envar>, blacklists the module from being autoloaded and installs the hook <filename>insmodpost.sh</filename> in the <filename>initqueue-settled</filename>.</para>
-      <para><filename>parse-insmodpost.sh</filename>:</para>
-      <programlisting>for p in $(getargs rd.driver.post=); do 
-    echo &quot;blacklist $p&quot; &gt;&gt; /etc/modprobe.d/initramfsblacklist.conf
-    _do_insmodpost=1
-done
-
-[ -n &quot;$_do_insmodpost&quot; ] &amp;&amp; /sbin/initqueue --settled --unique --onetime /sbin/insmodpost.sh
-unset _do_insmodpost
-</programlisting>
-      <para><filename>insmodpost.sh</filename>, which is called in the <filename>initqueue-settled</filename> hook will just modprobe the kernel modules specified in all <envar>rd.driver.post</envar> kernel command line parameters. It runs after <command>udev</command> has settled and is only called once (<parameter>--onetime</parameter>).</para>
-      <para><filename>insmodpost.sh</filename>:</para>
-      <programlisting>. /lib/dracut-lib.sh
-
-for p in $(getargs rd.driver.post=); do 
-    modprobe $p
-done
-</programlisting>
-      <section>
-        <title>check()</title>
-        <para><filename>
-            <function>check()</function>
-          </filename> is called by dracut to evaluate the inclusion of a dracut module in the initramfs.</para>
-        <variablelist>
-          <varlistentry>
-            <term> $hostonly</term>
-            <listitem>
-              <para>If  the $hostonly variable is set, then the module check() function  should be in &quot;hostonly&quot; mode, which means, that the check() should only return 0, if the module is really needed to boot this specific host.</para>
-            </listitem>
-          </varlistentry>
-        </variablelist>
-        <para><function>check()</function> should return with:</para>
-        <variablelist>
-          <varlistentry>
-            <term>0</term>
-            <listitem>
-              <para>Include the dracut module in the initramfs.</para>
-            </listitem>
-          </varlistentry>
-          <varlistentry>
-            <term>1</term>
-            <listitem>
-              <para>Do not include the dracut module. The requirements are not fullfilled (missing tools, etc.)</para>
-            </listitem>
-          </varlistentry>
-          <varlistentry>
-            <term>255</term>
-            <listitem>
-              <para>Only include the dracut module, if another module requires it or  if explicitly specified in the config file or on the argument list.</para>
-            </listitem>
-          </varlistentry>
-        </variablelist>
-      </section>
-      <section>
-        <title>depends()</title>
-        <para>The function <function>depends()</function> should <function>echo</function> all other dracut module names the module depends on.</para>
-      </section>
-      <section>
-        <title>install()</title>
-        <para>dracut_install</para>
-        <para>inst</para>
-        <para>inst_hook</para>
-        <para>inst_rules</para>
-        <para/>
-      </section>
-      <section>
-        <title>installkernel()</title>
-        <para>instmods</para>
-      </section>
-      <section>
-        <title>Creation Functions</title>
-        <para>
- </para>
-      </section>
-      <section>
-        <title>Initramfs Functions</title>
-        <para>
- </para>
-      </section>
-      <section>
-        <title>Network Modules</title>
-        <para>
- </para>
-      </section>
-    </section>
-  </chapter>
-  <appendix>
-    <title>Man Pages</title>
-    <section id="dracut.man">
-      <title>dracut</title>
-      <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="dracut.8.xml" encoding="UTF-8" parse="xml"/>
-    </section>
-    <section id="dracut.conf">
-      <title>dracut.conf</title>
-      <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="dracut.conf.5.xml" encoding="UTF-8" parse="xml"/>
-    </section>
-    <section id="dracut.kernel">
-      <title>dracut.kernel</title>
-      <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="dracut.kernel.7.xml" encoding="UTF-8" parse="xml"/>
-    </section>
-  </appendix>
-</book>

git2spec.pl

@@ -0,0 +1,61 @@
+#!/usr/bin/perl
+
+sub last_tag {
+    open( GIT, 'git log  --pretty=format:%H |');
+  LINE: while( <GIT> ) {
+      open( GIT2, "git tag --contains $_ |");
+      while( <GIT2> ) {
+	  chomp;
+	  last LINE if /..*/;
+      }
+      close GIT2;
+  }
+    $tag=$_;
+    close GIT2;
+    close GIT;         # be done
+    return $tag;
+};
+
+sub create_patches {
+    my $tag=shift;
+    my $pdir=shift;
+    my $num=0;
+    open( GIT, 'git format-patch -M -N --no-signature -o "'.$pdir.'" '.$tag.' |');
+    @lines=<GIT>;
+    close GIT;         # be done
+    return @lines;
+};
+
+use POSIX qw(strftime);
+my $datestr = strftime "%Y%m%d", gmtime;
+
+my $tag=shift;
+my $pdir=shift;
+$tag=&last_tag if not defined $tag;
+my @patches=&create_patches($tag, $pdir);
+my $num=$#patches + 2;
+$tag=~s/[^0-9]+?([0-9]+)/$1/;
+my $release="$num.git$datestr";
+$release="1" if $num == 1;
+
+while(<>) {
+    if (/^Version:/) {
+	print "Version: $tag\n";
+    }
+    elsif (/^Release:/) {
+	print "Release: $release%{?dist}\n";
+    }
+    elsif ((/^Source0:/) || (/^Source:/)) {
+	print $_;
+	$num=1;
+	for(@patches) {
+	    s/.*\///g;
+	    print "Patch$num: $_";
+	    $num++;
+	}
+	print "\n";
+    }
+    else {
+	print $_;
+    }
+}

lsinitrd

@@ -1,46 +0,0 @@
-#!/bin/bash 
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-#
-# Copyright 2005-2010 Harald Hoyer <harald@redhat.com>
-# Copyright 2005-2010 Red Hat, Inc.  All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-[[ $# -eq 1 || $# -eq 2 ]] || { echo "Usage: $(basename $0) <initramfs file> [<filename>]" ; exit 1 ; }
-[[ -f $1 ]]    || { echo "$1 does not exist" ; exit 1 ; }
-
-CAT=zcat
-FILE_T=$(file $1)
-
-if [[ "$FILE_T" =~ ": gzip compressed data" ]]; then
-    CAT=zcat
-elif [[ "$FILE_T" =~ ": xz compressed data" ]]; then
-    CAT=xzcat
-elif [[ "$FILE_T" =~ ": data" ]]; then
-    CAT=lzcat
-fi
-
-if [[ $# -eq 2 ]]; then
-    $CAT $1 | cpio --extract --verbose --quiet --to-stdout ${2#/} 2>/dev/null
-    exit $?
-fi
-
-echo "$1:"
-echo "========================================================================"
-$CAT $1 | cpio --extract --verbose --quiet --to-stdout 'lib/dracut/dracut-*' 2>/dev/null
-echo "========================================================================"
-$CAT $1 | cpio --extract --verbose --quiet --list
-echo "========================================================================"

lsinitrd.sh

@@ -0,0 +1,69 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Copyright 2005-2010 Harald Hoyer <harald@redhat.com>
+# Copyright 2005-2010 Red Hat, Inc.  All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+[[ $# -le 2 ]] || { echo "Usage: $(basename $0) [-s] [<initramfs file> [<filename>]]" ; exit 1 ; }
+
+sorted=0
+while getopts "s" opt; do
+    case $opt in
+        s)  sorted=1;;
+        \?) exit 1;;
+    esac
+done
+shift $((OPTIND-1))
+
+image="${1:-/boot/initramfs-$(uname -r).img}"
+[[ -f "$image" ]]    || { echo "$image does not exist" ; exit 1 ; }
+
+CAT=zcat
+FILE_T=$(file --dereference "$image")
+
+if echo "test"|xz|xz -dc --single-stream >/dev/null 2>&1; then
+    XZ_SINGLE_STREAM="--single-stream"
+fi
+
+if [[ "$FILE_T" =~ :\ gzip\ compressed\ data ]]; then
+    CAT=zcat
+elif [[ "$FILE_T" =~ :\ xz\ compressed\ data ]]; then
+    CAT="xzcat $XZ_SINGLE_STREAM"
+elif [[ "$FILE_T" =~ :\ XZ\ compressed\ data ]]; then
+    CAT="xzcat $XZ_SINGLE_STREAM"
+elif [[ "$FILE_T" =~ :\ LZMA ]]; then
+    CAT="xzcat $XZ_SINGLE_STREAM"
+elif [[ "$FILE_T" =~ :\ data ]]; then
+    CAT="xzcat $XZ_SINGLE_STREAM"
+fi
+
+if [[ $# -eq 2 ]]; then
+    $CAT $image | cpio --extract --verbose --quiet --to-stdout ${2#/} 2>/dev/null
+    exit $?
+fi
+
+echo "$image: $(du -h $image | awk '{print $1}')"
+echo "========================================================================"
+$CAT "$image" | cpio --extract --verbose --quiet --to-stdout 'lib/dracut/dracut-*' 2>/dev/null
+echo "========================================================================"
+if [ "$sorted" -eq 1 ]; then
+    $CAT "$image" | cpio --extract --verbose --quiet --list | sort -n -k5
+else
+    $CAT "$image" | cpio --extract --verbose --quiet --list
+fi
+echo "========================================================================"

mkinitrd-dracut.sh

@@ -8,6 +8,7 @@ usage () {
 
     $cmd "usage: ${0##*/} [--version] [--help] [-v] [-f] [--preload <module>]"
     $cmd "       [--image-version] [--with=<module>]"
+    $cmd "       [--nocompress]"
     $cmd "       <initrd-image> <kernel-version>"
     $cmd ""
     $cmd "       (ex: ${0##*/} /boot/initramfs-$kver.img $kver)"
@@ -49,10 +50,10 @@ while (($# > 0)); do
             exit 0;;
         -v|--verbose) dracut_args="${dracut_args} -v";;
         -f|--force) dracut_args="${dracut_args} -f";;
-        --preload) read_args modname "$@" || shift
+        --preload) read_arg modname "$@" || shift
             basicmodules="$basicmodules $modname";;
         --image-version) img_vers=yes;;
-        --rootfs) read_args rootfs "$@" || shift
+        --rootfs) read_arg rootfs "$@" || shift
             dracut_args="${dracut_args} --filesystems $rootfs";;
         --nocompress) dracut_args="$dracut_args --no-compress";;
         --help) usage -n;;

modules.d/00bootchart/module-setup.sh

@@ -3,6 +3,7 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 check() {
+    [[ "$mount_needs" ]] && return 1
     [ -x /sbin/bootchartd ] || return 1
     return 255
 }
@@ -12,16 +13,16 @@ depends() {
 }
 
 install() {
-    inst /sbin/bootchartd 
-    inst /bin/bash 
+    inst /sbin/bootchartd
+    inst /bin/bash
     inst_symlink /init /sbin/init
     inst_dir /lib/bootchart/tmpfs
-    inst /lib/bootchart/bootchart-collector 
-    inst /etc/bootchartd.conf 
-    inst /sbin/accton 
+    inst /lib/bootchart/bootchart-collector
+    inst /etc/bootchartd.conf
+    inst /sbin/accton
     inst /usr/bin/pkill /bin/pkill
     inst /bin/echo
-    inst /bin/grep 
+    inst /bin/grep
     inst /bin/usleep
     inst /usr/bin/[  /bin/[
 

modules.d/01fips/fips-boot.sh

@@ -0,0 +1,12 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
+    rm -f /etc/modprobe.d/fips.conf >/dev/null 2>&1
+elif getarg boot= >/dev/null; then
+    . /sbin/fips.sh
+    if mount_boot; then
+        do_fips || die "FIPS integrity test failed"
+    fi
+fi

modules.d/01fips/fips-noboot.sh

@@ -0,0 +1,11 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
+    rm -f /etc/modprobe.d/fips.conf >/dev/null 2>&1
+elif ! [ -f /tmp/fipsdone ]; then
+    . /sbin/fips.sh
+    mount_boot
+    do_fips || die "FIPS integrity test failed"
+fi

modules.d/01fips/fips.sh

@@ -1,55 +1,69 @@
 #!/bin/sh
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
-do_fips()
+
+mount_boot()
 {
-    FIPSMODULES=$(cat /etc/fipsmodules)
-    BOOT=$(getarg boot=)
-    KERNEL=$(uname -r)
-    case "$boot" in
-        block:LABEL=*|LABEL=*)
-            boot="${boot#block:}"
+    boot=$(getarg boot=)
+
+    if [ -n "$boot" ]; then
+        case "$boot" in
+        LABEL=*)
             boot="$(echo $boot | sed 's,/,\\x2f,g')"
             boot="/dev/disk/by-label/${boot#LABEL=}"
-            bootok=1 ;;
-        block:UUID=*|UUID=*)
-            boot="${boot#block:}"
-            boot="/dev/disk/by-uuid/${root#UUID=}"
-            bootok=1 ;;
+            ;;
+        UUID=*)
+            boot="/dev/disk/by-uuid/${boot#UUID=}"
+            ;;
         /dev/*)
-            bootok=1 ;;
+            ;;
         *)
             die "You have to specify boot=<boot device> as a boot option for fips=1" ;;
-    esac
+        esac
 
-    if ! [ -e "$boot" ]; then
-        udevadm trigger --action=add >/dev/null 2>&1
-        [ -z "$UDEVVERSION" ] && UDEVVERSION=$(udevadm --version)
-
-        if [ $UDEVVERSION -ge 143 ]; then
-            udevadm settle --exit-if-exists=$boot
-        else
-            udevadm settle --timeout=30
+        if ! [ -e "$boot" ]; then
+            udevadm trigger --action=add >/dev/null 2>&1
+            [ -z "$UDEVVERSION" ] && UDEVVERSION=$(udevadm --version)
+            i=0
+            while ! [ -e $boot ]; do
+                if [ $UDEVVERSION -ge 143 ]; then
+                    udevadm settle --exit-if-exists=$boot
+                else
+                    udevadm settle --timeout=30
+                fi
+                [ -e $boot ] && break
+                modprobe scsi_wait_scan && rmmod scsi_wait_scan
+                [ -e $boot ] && break
+                sleep 0.5
+                i=$(($i+1))
+                [ $i -gt 40 ] && break
+            done
         fi
+
+        [ -e "$boot" ] || return 1
+
+        mkdir /boot
+        info "Mounting $boot as /boot"
+        mount -oro "$boot" /boot || return 1
     fi
+}
 
-    [ -e "$boot" ]
-
-    mkdir /boot
-    info "Mounting $boot as /boot"
-    mount -oro "$boot" /boot
-
+do_fips()
+{
     info "Checking integrity of kernel"
+    newroot=$NEWROOT
+    KERNEL=$(uname -r)
 
-    if ! [ -e "/boot/.vmlinuz-${KERNEL}.hmac" ]; then
-        warn "/boot/.vmlinuz-${KERNEL}.hmac does not exist"
+    [ -e "$newroot/boot/.vmlinuz-${KERNEL}.hmac" ] || unset newroot
+
+    if ! [ -e "$newroot/boot/.vmlinuz-${KERNEL}.hmac" ]; then
+        warn "$newroot/boot/.vmlinuz-${KERNEL}.hmac does not exist"
         return 1
     fi
 
-    sha512hmac -c "/boot/.vmlinuz-${KERNEL}.hmac" || return 1
+    sha512hmac -c "$newroot/boot/.vmlinuz-${KERNEL}.hmac" || return 1
 
-    info "Umounting /boot"
-    umount /boot
+    FIPSMODULES=$(cat /etc/fipsmodules)
 
     info "Loading and integrity checking all crypto modules"
     for module in $FIPSMODULES; do
@@ -60,15 +74,11 @@ do_fips()
     info "Self testing crypto algorithms"
     modprobe tcrypt || return 1
     rmmod tcrypt
-    info "All initrd crypto checks done"  
+    info "All initrd crypto checks done"
+
+    > /tmp/fipsdone
+
+    umount /boot >/dev/null 2>&1
 
     return 0
 }
-
-if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
-    rm -f /etc/modprobe.d/fips.conf >/dev/null 2>&1
-else
-    set -e
-    do_fips || die "FIPS integrity test failed"
-    set +e
-fi

modules.d/01fips/module-setup.sh

@@ -11,31 +11,39 @@ depends() {
 }
 
 installkernel() {
-    FIPSMODULES="aead aes_generici aes-xts aes-x86_64 ansi_cprng cbc ccm chainiv ctr"
-    FIPSMODULES="$FIPSMODULES des deflate ecb eseqiv hmac seqiv sha256 sha512"
-    FIPSMODULES="$FIPSMODULES cryptomgr crypto_null tcrypt" 
+    local _fipsmodules _mod
+    _fipsmodules="aead aes_generic aes-xts aes-x86_64 ansi_cprng cbc ccm chainiv ctr"
+    _fipsmodules+=" des deflate ecb eseqiv hmac seqiv sha256 sha512"
+    _fipsmodules+=" cryptomgr crypto_null tcrypt dm-mod dm-crypt"
 
-    mkdir -p "${initdir}/etc/modprobe.d"
+    mkdir -m 0755 -p "${initdir}/etc/modprobe.d"
 
-    for mod in $FIPSMODULES; do 
-        if instmods $mod; then
-            echo $mod >> "${initdir}/etc/fipsmodules"
-            echo "blacklist $mod" >> "${initdir}/etc/modprobe.d/fips.conf"
+    for _mod in $_fipsmodules; do
+        if hostonly='' instmods $_mod; then
+            echo $_mod >> "${initdir}/etc/fipsmodules"
+            echo "blacklist $_mod" >> "${initdir}/etc/modprobe.d/fips.conf"
         fi
     done
+    hostonly='' instmods scsi_wait_scan
 }
 
 install() {
-    inst_hook pre-trigger 01 "$moddir/fips.sh"
+    local _dir
+    inst_hook pre-trigger 01 "$moddir/fips-boot.sh"
+    inst_hook pre-pivot 01 "$moddir/fips-noboot.sh"
+    inst "$moddir/fips.sh" /sbin/fips.sh
+
     dracut_install sha512hmac rmmod insmod mount uname umount
 
-    for dir in "$usrlibdir" "$libdir"; do
-        [[ -e $dir/libsoftokn3.so ]] && \
-            dracut_install $dir/libsoftokn3.so $dir/libsoftokn3.chk \
-            $dir/libfreebl3.so $dir/libfreebl3.chk && \
-            break
-    done
+    inst_libdir_file libsoftokn3.so
+    inst_libdir_file libsoftokn3.so
+    inst_libdir_file libsoftokn3.chk
+    inst_libdir_file libfreebl3.so
+    inst_libdir_file libfreebl3.chk
 
     dracut_install $usrlibdir/hmaccalc/sha512hmac.hmac
+    if command -v prelink >/dev/null; then
+        dracut_install prelink
+    fi
 }
 

modules.d/02caps/README

@@ -2,7 +2,7 @@ This adds the following parameters:
 rd.caps=1
         turn the caps module on/off
 rd.caps.initdrop=cap_sys_module,cap_sys_rawio
-        drop the specified comma seperated capabilities
+        drop the specified comma separated capabilities
 rd.caps.disablemodules=1
         turn off module loading
 rd.caps.disablekexec=1

modules.d/02caps/caps.sh

@@ -12,7 +12,7 @@ if [ "$capsmode" = "1" ]; then
 
     info "Loading CAPS_MODULES $CAPS_MODULES"
     for i in $CAPS_MODULES;do modprobe $i 2>&1 >/dev/null | vinfo; done
-    
+
     if [ "$CAPS_MODULES_DISABLED" = "1" -a -e /proc/sys/kernel/modules_disabled ]; then
         info "Disabling module loading."
         echo $CAPS_MODULES_DISABLED > /proc/sys/kernel/modules_disabled
@@ -29,7 +29,7 @@ if [ "$capsmode" = "1" ]; then
         echo $CAPS_USERMODEHELPER_BSET > /proc/sys/kernel/usermodehelper/bset
         echo $CAPS_USERMODEHELPER_BSET > /proc/sys/kernel/usermodehelper/inheritable
     fi
-    
+
     echo "CAPS_INIT_DROP=\"$CAPS_INIT_DROP\"" > /etc/capsdrop
     info "Will drop capabilities $CAPS_INIT_DROP from init."
 fi

modules.d/02fips-aesni/module-setup.sh

@@ -0,0 +1,30 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+    return 255
+}
+
+depends() {
+    return 0
+}
+
+installkernel() {
+    local _fipsmodules _mod
+    _fipsmodules="aesni-intel"
+
+    mkdir -m 0755 -p "${initdir}/etc/modprobe.d"
+
+    for _mod in $_fipsmodules; do
+        if instmods $_mod; then
+            echo $_mod >> "${initdir}/etc/fipsmodules"
+            echo "blacklist $_mod" >> "${initdir}/etc/modprobe.d/fips.conf"
+        fi
+    done
+}
+
+install() {
+    return 0
+}
+

modules.d/05busybox/module-setup.sh

@@ -13,19 +13,24 @@ depends() {
 }
 
 install() {
-    inst busybox /sbin/busybox
-
-    # List of shell programs that we use in other official dracut modules, that
-    # must be supported by the busybox installed on the host system
-    progs="echo grep usleep [ rmmod insmod mount uname umount setfont kbd_mode stty gzip bzip2 chvt readlink blkid dd losetup tr sed seq ps more cat rm free ping netstat vi ping6 fsck ip hostname basename mknod mkdir pidof sleep chroot ls cp mv dmesg mkfifo less ln modprobe"
+    local _i _progs _path
+    inst busybox /usr/bin/busybox
+    for _i in `/sbin/busybox | sed -ne '1,/Currently/!{s/,//g; s/busybox//g; p}'`
+    do
+        _progs="$_progs $_i"
+    done
 
     # FIXME: switch_root should be in the above list, but busybox version hangs
     # (using busybox-1.15.1-7.fc14.i686 at the time of writing)
 
-    for i in $progs; do
-	path=$(find_binary "$i")
-	ln -s /sbin/busybox "$initdir/$path"
+    for _i in $_progs; do
+        _path=$(find_binary "$_i")
+        [ -z "$_path" ] && continue
+        if [[ $_path != ${_path#/usr} ]]; then
+            ln -sf ../../usr/bin/busybox "$initdir/$_path"
+        else
+            ln -sf ../usr/bin/busybox "$initdir/$_path"
+        fi
     done
-
 }
 

modules.d/10i18n/README

@@ -23,7 +23,7 @@ distributions.  To deal with it avoiding hardcoding those differences in
 the installation script we handle it by mappings between variables used
 by Dracut and the ones in the system.  Package maintainer is expected to
 create those for his/her distribution and it's appreciated to share it
-with us, so we can include it in source package. 
+with us, so we can include it in source package.
 
 
 1. Hostonly vs Generic
@@ -47,6 +47,8 @@ The following variables are used by i18n install script and at initramfs
 runtime:
 
     KEYMAP - keyboard translation table loaded by loadkeys
+    KEYTABLE - base name for keyboard translation table; if UNICODE is
+    true, Unicode version will be loaded. Overrides KEYMAP.
     EXT_KEYMAPS - list of extra keymaps to bo loaded (sep. by space)
     UNICODE - boolean, indicating UTF-8 mode
     FONT - console font

modules.d/10i18n/console_init.sh

@@ -22,6 +22,7 @@ set_terminal() {
         stty -F ${dev} iutf8
     else
         printf '\033%%@' >&7
+        stty -F ${dev} -iutf8
     fi
 }
 
@@ -61,7 +62,6 @@ dev_open() {
         exec 7>>${dev}
 }
 
-
 dev=/dev/${1#/dev/}
 devname=${dev#/dev/}
 
@@ -70,8 +70,6 @@ devname=${dev#/dev/}
     exit 1
 }
 
-[ -e /tmp/console_init.${devname} ] && exit 0
-
 dev_open ${dev}
 
 for fd in 6 7; do
@@ -88,4 +86,4 @@ set_font ${dev}
 set_keymap
 
 dev_close
->/tmp/console_init.${devname}
+

modules.d/10i18n/module-setup.sh

@@ -3,6 +3,7 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 check() {
+    [[ "$mount_needs" ]] && return 1
     return 0
 }
 
@@ -11,6 +12,7 @@ depends() {
 }
 
 install() {
+    [ -x /lib/systemd/systemd-vconsole-setup ] && dracut_install /lib/systemd/systemd-vconsole-setup
     KBDSUBDIRS=consolefonts,consoletrans,keymaps,unimaps
     DEFAULT_FONT=LatArCyrHeb-16
     I18N_CONF="/etc/locale.conf"
@@ -82,7 +84,7 @@ install() {
     install_base() {
         dracut_install setfont loadkeys kbd_mode stty
 
-        inst ${moddir}/console_init /lib/udev/console_init
+        inst ${moddir}/console_init.sh /lib/udev/console_init
         inst_rules ${moddir}/10-console.rules
         inst_hook cmdline 20 "${moddir}/parse-i18n.sh"
     }
@@ -90,16 +92,23 @@ install() {
     install_all_kbd() {
         local rel f
 
-        for f in $(eval find ${kbddir}/{${KBDSUBDIRS}} -type f -print)
-        do
-            inst $f
+        find $(eval echo ${kbddir}/{${KBDSUBDIRS}}) -type f -print | \
+            while read f; do
+            inst_simple $f
         done
 
         # remove unnecessary files
         rm -f "${initdir}${kbddir}/consoletrans/utflist"
         find "${initdir}${kbddir}/" -name README\* -delete
+        find "${initdir}${kbddir}/" -name '*.gz' -print -quit \
+            | while read line; do
+            dracut_install gzip
+            done
 
-        dracut_install gzip bzip2
+        find "${initdir}${kbddir}/" -name '*.bz2' -print -quit \
+            | while read line; do
+            dracut_install bzip2
+            done
     }
 
     install_local_i18n() {
@@ -109,8 +118,38 @@ install() {
         [ -f $I18N_CONF ] && . $I18N_CONF
         [ -f $VCONFIG_CONF ] && . $VCONFIG_CONF
 
+        shopt -q -s nocasematch
+        if [[ ${UNICODE} ]]
+        then
+            if [[ ${UNICODE} = YES || ${UNICODE} = 1 ]]
+            then
+                UNICODE=1
+            elif [[ ${UNICODE} = NO || ${UNICODE} = 0 ]]
+            then
+                UNICODE=0
+            else
+                UNICODE=''
+            fi
+        fi
+        if [[ ! ${UNICODE} && ${LANG} =~ .*\.UTF-?8 ]]
+        then
+            UNICODE=1
+        fi
+        shopt -q -u nocasematch
+
         # Gentoo user may have KEYMAP set to something like "-u pl2",
         KEYMAP=${KEYMAP#-* }
+
+        # KEYTABLE is a bit special - it defines base keymap name and UNICODE
+        # determines whether non-UNICODE or UNICODE version is used
+
+        if [[ ${KEYTABLE} ]]; then
+           if [[ ${UNICODE} == 1 ]]; then
+               [[ ${KEYTABLE} =~ .*\.uni.* ]] || KEYTABLE=${KEYTABLE%.map*}.uni
+           fi
+           KEYMAP=${KEYTABLE}
+        fi
+
         # I'm not sure of the purpose of UNIKEYMAP and GRP_TOGGLE.  They were in
         # original redhat-i18n module.  Anyway it won't hurt.
         EXT_KEYMAPS+=\ ${UNIKEYMAP}\ ${GRP_TOGGLE}
@@ -140,30 +179,13 @@ install() {
         if [[ ${FONT_MAP} ]]
         then
             FONT_MAP=${FONT_MAP%.trans}
-            inst ${kbddir}/consoletrans/${FONT_MAP}.trans
+            inst_simple ${kbddir}/consoletrans/${FONT_MAP}.trans
         fi
 
         if [[ ${FONT_UNIMAP} ]]
         then
             FONT_UNIMAP=${FONT_UNIMAP%.uni}
-            inst ${kbddir}/unimaps/${FONT_UNIMAP}.uni
-        fi
-
-        if [[ ${UNICODE} ]]
-        then
-            if [[ ${UNICODE^^} = YES || ${UNICODE} = 1 ]]
-            then
-                UNICODE=1
-            elif [[ ${UNICODE^^} = NO || ${UNICODE} = 0 ]]
-            then
-                UNICODE=0
-            else
-                UNICODE=''
-            fi
-        fi
-        if [[ ! ${UNICODE} && ${LANG^^} =~ .*\.UTF-?8 ]]
-        then
-            UNICODE=1
+            inst_simple ${kbddir}/unimaps/${FONT_UNIMAP}.uni
         fi
 
         mksubdirs ${initdir}${I18N_CONF}
@@ -177,12 +199,12 @@ install() {
         for kbddir in ${kbddir} /usr/lib/kbd /lib/kbd /usr/share /usr/share/kbd
         do
             [[ -d "${kbddir}" ]] && \
-                for dir in ${KBDSUBDIRS//,/ } 
+                for dir in ${KBDSUBDIRS//,/ }
             do
                 [[ -d "${kbddir}/${dir}" ]] && continue
                 false
             done && break
-            kbddir='' 
+            kbddir=''
         done
 
         [[ ${kbddir} ]] || {

modules.d/10i18n/parse-i18n.sh

@@ -20,9 +20,9 @@ inst_key_val() {
 }
 
 inst_key_val '' /etc/vconsole.conf KEYMAP      vconsole.keymap      KEYTABLE
-inst_key_val '' /etc/vconsole.conf FONT        vconsole.font        SYSFONT 
-inst_key_val '' /etc/vconsole.conf FONT_MAP    vconsole.font.map    CONTRANS 
-inst_key_val '' /etc/vconsole.conf FONT_UNIMAP vconsole.font.unimap UNIMAP 
+inst_key_val '' /etc/vconsole.conf FONT        vconsole.font        SYSFONT
+inst_key_val '' /etc/vconsole.conf FONT_MAP    vconsole.font.map    CONTRANS
+inst_key_val '' /etc/vconsole.conf FONT_UNIMAP vconsole.font.unimap UNIMAP
 inst_key_val 1  /etc/vconsole.conf UNICODE     vconsole.unicode vconsole.font.unicode
 inst_key_val '' /etc/vconsole.conf EXT_KEYMAP  vconsole.keymap.ext
 
@@ -35,3 +35,10 @@ if [ -f /etc/locale.conf ]; then
     export LC_ALL
 fi
 
+# FIXME: fix systemd-vconsole-setup
+#if [ -x /lib/systemd/systemd-vconsole-setup ]; then
+#    /lib/systemd/systemd-vconsole-setup
+#    rm -f /{etc,lib}/udev/rules.d/10-console.rules
+#    rm -f /lib/udev/console_init
+#    ln -s /lib/systemd/systemd-vconsole-setup /lib/udev/console_init
+#fi

modules.d/10rpmversion/module-setup.sh

@@ -1,27 +0,0 @@
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-check() {
-    [ -f /etc/redhat-release ]
-}
-
-depends() {
-    return 0
-}
-
-install() {
-    if [ -e "$moddir/dracut-version" ]; then
-        dracut_rpm_version=$(cat "$moddir/dracut-version")
-        inst "$moddir/dracut-version" /lib/dracut/$dracut_rpm_version
-    else
-        if rpm -qf $(type -P $0) &>/dev/null; then
-            dracut_rpm_version=$(rpm -qf --qf '%{name}-%{version}-%{release}\n' $(type -P $0) | { ver="";while read line;do ver=$line;done;echo $ver;} )
-            mkdir -m 0755 -p $initdir/lib $initdir/lib/dracut
-            echo $dracut_rpm_version > $initdir/lib/dracut/$dracut_rpm_version
-        fi
-    fi
-    inst_hook cmdline 01 "$moddir/version.sh"
-
-}
-

modules.d/30convertfs/convertfs.sh

@@ -0,0 +1,184 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+ROOT="$1"
+
+if [[ ! -d "$ROOT" ]]; then
+    echo "Usage: $0 <rootdir>"
+    exit 1
+fi
+
+if [[ "$ROOT" -ef / ]]; then
+    echo "Can't convert the running system."
+    echo "Please boot with 'rd.convertfs' on the kernel command line,"
+    echo "to update with the help of the initramfs,"
+    echo "or run this script from a rescue system."
+    exit 1
+fi
+
+while [[ "$ROOT" != "${ROOT%/}" ]]; do
+    ROOT=${ROOT%/}
+done
+
+if [ ! -L $ROOT/var/run -a -e $ROOT/var/run ]; then
+    echo "Converting /var/run to symlink"
+    mv -f $ROOT/var/run $ROOT/var/run.runmove~
+    ln -sfn ../run $ROOT/var/run
+fi
+
+if [ ! -L $ROOT/var/lock -a -e $ROOT/var/lock ]; then
+    echo "Converting /var/lock to symlink"
+    mv -f $ROOT/var/lock $ROOT/var/lock.lockmove~
+    ln -sfn ../run/lock $ROOT/var/lock
+fi
+
+needconvert() {
+    for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64"; do
+        if [[ -e "$dir" ]]; then
+            [[ -L "$dir" ]] || return 0
+        fi
+    done
+    return 1
+}
+
+if ! [ -e "$ROOT/usr/bin" ]; then
+    echo "$ROOT/usr/bin does not exist!"
+    echo "Make sure, the kernel command line has enough information"
+    echo "to mount /usr (man dracut.cmdline)"
+    exit 1
+fi
+
+
+if ! needconvert; then
+    echo "Your system is already converted."
+    exit 0
+fi
+
+testfile="$ROOT/.usrmovecheck$$"
+rm -f "$testfile"
+> "$testfile"
+if [[ ! -e "$testfile" ]]; then
+    echo "Cannot write to $ROOT/"
+    exit 1
+fi
+rm -f "$testfile"
+
+testfile="$ROOT/usr/.usrmovecheck$$"
+rm -f "$testfile"
+> "$testfile"
+if [[ ! -e "$testfile" ]]; then
+    echo "Cannot write to $ROOT/usr/"
+    exit 1
+fi
+rm -f "$testfile"
+
+ismounted() {
+    while read a m a; do
+        [[ "$m" = "$1" ]] && return 0
+    done < /proc/mounts
+    return 1
+}
+
+# clean up after ourselves no matter how we die.
+cleanup() {
+    echo "Something failed. Move back to the original state"
+    for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64" \
+	"$ROOT/usr/bin" "$ROOT/usr/sbin" "$ROOT/usr/lib" \
+        "$ROOT/usr/lib64"; do
+        [[ -d "${dir}.usrmove-new" ]] && rm -fr "${dir}.usrmove-new"
+        if [[ -d "${dir}.usrmove-old" ]]; then
+            mv "$dir" "${dir}.del~"
+            mv "${dir}.usrmove-old" "$dir"
+            rm -fr "${dir}.del~"
+        fi
+    done
+}
+
+trap 'ret=$?; [[ $ret -ne 0 ]] && cleanup;exit $ret;' EXIT
+trap 'exit 1;' SIGINT
+
+ismounted "$ROOT/usr" || CP_HARDLINK="-l"
+
+set -e
+
+# merge / and /usr in new dir in /usr
+for dir in bin sbin lib lib64; do
+    rm -rf "$ROOT/usr/${dir}.usrmove-new"
+    [[ -L "$ROOT/$dir" ]] && continue
+    [[ -d "$ROOT/$dir" ]] || continue
+    echo "Make a copy of \`$ROOT/usr/$dir'."
+    [[ -d "$ROOT/usr/$dir" ]] \
+        && cp -ax -l "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-new"
+    echo "Merge the copy with \`$ROOT/$dir'."
+    [[ -d "$ROOT/usr/${dir}.usrmove-new" ]] \
+        || mkdir -p "$ROOT/usr/${dir}.usrmove-new"
+    cp -axT $CP_HARDLINK --backup --suffix=.usrmove~ "$ROOT/$dir" "$ROOT/usr/${dir}.usrmove-new"
+    echo "Clean up duplicates in \`$ROOT/usr/$dir'."
+    # delete all symlinks that have been backed up
+    find "$ROOT/usr/${dir}.usrmove-new" -type l -name '*.usrmove~' -delete || :
+    # replace symlink with backed up binary
+    find "$ROOT/usr/${dir}.usrmove-new" \
+        -name '*.usrmove~' \
+        -type f \
+        -exec bash -c 'p="{}";o=${p%%%%.usrmove~};
+                       [[ -L "$o" ]] && mv -f "$p" "$o"' ';' || :
+done
+# switch over merged dirs in /usr
+for dir in bin sbin lib lib64; do
+    [[ -d "$ROOT/usr/${dir}.usrmove-new" ]] || continue
+    echo "Switch to new \`$ROOT/usr/$dir'."
+    rm -fr "$ROOT/usr/${dir}.usrmove-old"
+    mv "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-old"
+    mv "$ROOT/usr/${dir}.usrmove-new" "$ROOT/usr/$dir"
+done
+
+# replace dirs in / with links to /usr
+for dir in bin sbin lib lib64; do
+    [[ -L "$ROOT/$dir" ]] && continue
+    [[ -d "$ROOT/$dir" ]] || continue
+    echo "Create \`$ROOT/$dir' symlink."
+    rm -rf "$ROOT/${dir}.usrmove-old" || :
+    mv "$ROOT/$dir" "$ROOT/${dir}.usrmove-old"
+    ln -sfn usr/$dir "$ROOT/$dir"
+done
+
+echo "Clean up backup files."
+# everything seems to work; cleanup
+for dir in bin sbin lib lib64; do
+     # if we get killed in the middle of "rm -rf", ensure not to leave
+     # an incomplete directory, which is moved back by cleanup()
+    [[ -d "$ROOT/usr/${dir}.usrmove-old" ]] \
+        && mv "$ROOT/usr/${dir}.usrmove-old" "$ROOT/usr/${dir}.usrmove-old~"
+    [[ -d "$ROOT/${dir}.usrmove-old" ]] \
+        && mv "$ROOT/${dir}.usrmove-old" "$ROOT/${dir}.usrmove-old~"
+done
+
+for dir in bin sbin lib lib64; do
+    [[ -d "$ROOT/usr/${dir}.usrmove-old~" ]] \
+        && rm -rf "$ROOT/usr/${dir}.usrmove-old~" || :
+    [[ -d "$ROOT/${dir}.usrmove-old~" ]] \
+        && rm -rf "$ROOT/${dir}.usrmove-old~" || :
+done
+
+for dir in lib lib64; do
+    [[ -d "$ROOT/$dir" ]] || continue
+    for lib in "$ROOT"/usr/${dir}/lib*.so*.usrmove~; do
+        [[ -f $lib ]] || continue
+        mv $lib ${lib/.so/_so}
+    done
+done
+
+set +e
+
+echo "Run ldconfig."
+ldconfig -r "$ROOT"
+
+. $ROOT/etc/selinux/config
+if [ -n "$(command -v setfiles)" ] && [ "$SELINUX" != "disabled" ] && [ -f /etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts ]; then
+    echo "Fixing SELinux labels"
+    setfiles -r $ROOT -p /etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts $ROOT/sbin $ROOT/bin $ROOT/lib $ROOT/lib64 $ROOT/usr/lib $ROOT/usr/lib64 $ROOT/etc/ld.so.cache $ROOT/var/cache/ldconfig || :
+fi
+
+echo "Done."
+exit 0

modules.d/30convertfs/do-convertfs.sh

@@ -0,0 +1,11 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+if getargbool 0 rd.convertfs; then
+    if getargbool 0 rd.debug; then
+        bash -x convertfs "$NEWROOT" 2>&1 | vinfo
+    else
+        convertfs "$NEWROOT" 2>&1 | vinfo
+    fi
+fi

modules.d/30convertfs/module-setup.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+    [[ $mount_needs ]] && return 1
+    return 255
+}
+
+depends() {
+    return 0
+}
+
+install() {
+    dracut_install bash
+    dracut_install find ldconfig mv rm cp ln 
+    inst_hook pre-pivot 99 "$moddir/do-convertfs.sh"
+    inst "$moddir/convertfs.sh" /usr/bin/convertfs
+}
+

modules.d/40network/dhclient-script.sh

@@ -1,4 +1,4 @@
-#!/bin/sh 
+#!/bin/sh
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
@@ -22,32 +22,34 @@ setup_interface() {
     # disallow MTUs from 576 and below by default, so that broken
     # MTUs are ignored, but higher stuff is allowed (1492, 1500, etc).
     if [ -n "$mtu" ] && [ $mtu -gt 576 ] ; then
-        echo "if ! ip link set $netif mtu $mtu ; then"
-        echo "ip link set $netif down"
-        echo "ip link set $netif mtu $mtu"
-        echo "ip link set $netif up"
-        echo wait_for_if_up $netif
-        echo "fi"
-    fi > /tmp/net.$netif.up
+        if ! ip link set $netif mtu $mtu ; then
+            ip link set $netif down
+            ip link set $netif mtu $mtu
+            ip link set $netif up
+            wait_for_if_up $netif
+        fi
+    fi
 
-    echo ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} dev $netif >> /tmp/net.$netif.up
+    ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} dev $netif
 
     [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
 
     [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
     if  [ -n "$namesrv" ] ; then
         for s in $namesrv; do
-            echo nameserver $s 
+            echo nameserver $s
         done
     fi >> /tmp/net.$netif.resolv.conf
 
-    [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
+    # Note: hostname can be fqdn OR short hostname, so chop off any
+    # trailing domain name and explicity add any domain if set.
+    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 }
 
-PATH=$PATH:/sbin:/usr/sbin
+PATH=/usr/sbin:/usr/bin:/sbin:/bin
 
 export PS4="dhclient.$interface.$$ + "
-exec >>/run/initramfs/initlog.pipe 2>>/run/initramfs/initlog.pipe
+exec >>/run/initramfs/loginit.pipe 2>>/run/initramfs/loginit.pipe
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
 
 # We already need a set netif here
@@ -64,17 +66,32 @@ case $reason in
         ;;
     BOUND)
         echo "dhcp: BOND setting $netif"
-        if ! arping -q -D -c 2 -I $netif $new_ip_address ; then
-            warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
-            exit 1
+        unset layer2
+        if [ -f /sys/class/net/$netif/device/layer2 ]; then
+            read layer2 < /sys/class/net/$netif/device/layer2
         fi
-        setup_interface 
+        if [ "$layer2" != "0" ]; then
+            if ! arping -q -D -c 2 -I $netif $new_ip_address ; then
+                warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
+                exit 1
+            fi
+        fi
+        unset layer2
+        setup_interface
         set | while read line; do
             [ "${line#new_}" = "$line" ] && continue
-            echo "$line" 
+            echo "$line"
         done >/tmp/dhclient.$netif.dhcpopts
-        echo online > /sys/class/net/$netif/uevent
-        /sbin/initqueue --onetime --name netroot-$netif  /sbin/netroot $netif 
+
+        {
+            echo '. /lib/net-lib.sh'
+            echo "setup_net $netif"
+            echo "source_hook initqueue/online $netif"
+            [ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
+            echo "rm -f $hookdir/initqueue/setup_net_$netif.sh"
+        } > $hookdir/initqueue/setup_net_$netif.sh
+
+        >/tmp/net.$netif.up
         ;;
     *) echo "dhcp: $reason";;
 esac

modules.d/40network/dhclient.conf

@@ -1,3 +1,3 @@
 request subnet-mask, broadcast-address, time-offset, routers,
         domain-name, domain-name-servers, domain-search, host-name,
-        root-path, interface-mtu; 
+        root-path, interface-mtu;

modules.d/40network/dhcp-root.sh

@@ -21,5 +21,5 @@ if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] ; th
 
     # Shut up init error check
     [ -z "$root" ] && root="dhcp"
-    echo '[ -d $NEWROOT/proc -o -e /dev/root ]' > $hookdir/initqueue-finished/dhcp.sh
+    echo '[ -d $NEWROOT/proc -o -e /dev/root ]' > $hookdir/initqueue/finished/dhcp.sh
 fi

modules.d/40network/ifup.sh

@@ -5,86 +5,12 @@
 # We don't need to check for ip= errors here, that is handled by the
 # cmdline parser script
 #
-PATH=$PATH:/sbin:/usr/sbin
+# without $2 means this is for real netroot case
+# or it is for manually bring up network ie. for kdump scp vmcore
+PATH=/usr/sbin:/usr/bin:/sbin:/bin
 
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
-
-# Run dhclient
-do_dhcp() {
-    # /sbin/dhclient-script will mark the netif up and generate the online
-    # event for nfsroot
-    # XXX add -V vendor class and option parsing per kernel
-    echo "Starting dhcp for interface $netif"
-    dhclient "$@" -1 -q -cf /etc/dhclient.conf -pf /tmp/dhclient.$netif.pid -lf /tmp/dhclient.$netif.lease $netif \
-        || echo "dhcp failed"
-}
-
-load_ipv6() {
-    modprobe ipv6
-    i=0
-    while [ ! -d /proc/sys/net/ipv6 ]; do
-        i=$(($i+1))
-        [ $i -gt 10 ] && break
-        sleep 0.1
-    done
-}
-
-do_ipv6auto() {
-    load_ipv6
-    {
-        echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding 
-        echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
-        echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
-        echo ip link set $netif up 
-        echo wait_for_if_up $netif
-    } > /tmp/net.$netif.up
-
-    [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
-
-    namesrv=$(getargs nameserver)
-    if  [ -n "$namesrv" ] ; then
-        for s in $namesrv; do
-            echo nameserver $s 
-        done
-    fi >> /tmp/net.$netif.resolv.conf
-
-
-    echo online > /sys/class/net/$netif/uevent
-    /sbin/initqueue --onetime --name netroot-$netif  /sbin/netroot $netif 
-}
-
-# Handle static ip configuration
-do_static() {
-    strstr $ip '*:*:*' && load_ipv6
-
-    {
-        echo ip link set $netif up 
-        echo wait_for_if_up $netif
-        # do not flush addr for ipv6
-        strstr $ip '*:*:*' || \
-            echo ip addr flush dev $netif
-        echo ip addr add $ip/$mask dev $netif
-    } > /tmp/net.$netif.up
-
-    [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
-    [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
-
-    namesrv=$(getargs nameserver)
-    if  [ -n "$namesrv" ] ; then
-        for s in $namesrv; do
-            echo nameserver $s 
-        done
-    fi >> /tmp/net.$netif.resolv.conf
-
-    echo online > /sys/class/net/$netif/uevent
-    /sbin/initqueue --onetime --name netroot-$netif  /sbin/netroot $netif 
-}
-
-PATH=$PATH:/sbin:/usr/sbin
-
-export PS4="ifup.$1.$$ + "
-exec >>/run/initramfs/initlog.pipe 2>>/run/initramfs/initlog.pipe
-type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
 
 # Huh? No $1?
 [ -z "$1" ] && exit 1
@@ -105,27 +31,100 @@ fi
 # bridge this interface?
 if [ -e /tmp/bridge.info ]; then
     . /tmp/bridge.info
-    if [ "$netif" = "$ethname" ]; then
+    for ethname in $ethnames ; do
+        if [ "$netif" = "$ethname" ]; then
+            if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then
+                : # We need to really setup bond (recursive call)
+            else
+                netif="$bridgename"
+            fi
+        fi
+    done
+fi
+
+if [ -e /tmp/vlan.info ]; then
+    . /tmp/vlan.info
+    if [ "$netif" = "$phydevice" ]; then
         if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then
             : # We need to really setup bond (recursive call)
         else
-            netif="$bridgename"
+            netif="$vlanname"
         fi
     fi
 fi
 
-# bail immediately if the interface is already up
-# or we don't need the network
-[ -f "/tmp/net.$netif.up" ] && exit 0
-[ -f "/tmp/root.info" ] || exit 0
-. /tmp/root.info
-[ -z "$netroot" ] && exit 0
+# disable manual ifup while netroot is set for simplifying our logic
+# in netroot case we prefer netroot to bringup $netif automaticlly
+[ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2"
+[ -z "$netroot" ] && [ -z "$manualup" ] && exit 0
+[ -n "$manualup" ] && >/tmp/net.$netif.manualup
+
+# Run dhclient
+do_dhcp() {
+    # dhclient-script will mark the netif up and generate the online
+    # event for nfsroot
+    # XXX add -V vendor class and option parsing per kernel
+    echo "Starting dhcp for interface $netif"
+    dhclient "$@" -1 -q -cf /etc/dhclient.conf -pf /tmp/dhclient.$netif.pid -lf /tmp/dhclient.$netif.lease $netif \
+        || echo "dhcp failed"
+}
+
+load_ipv6() {
+    modprobe ipv6
+    i=0
+    while [ ! -d /proc/sys/net/ipv6 ]; do
+        i=$(($i+1))
+        [ $i -gt 10 ] && break
+        sleep 0.1
+    done
+}
+
+do_ipv6auto() {
+    load_ipv6
+    echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding
+    echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
+    echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
+    ip link set $netif up
+    wait_for_if_up $netif
+
+    [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
+
+    namesrv=$(getargs nameserver)
+    if  [ -n "$namesrv" ] ; then
+        for s in $namesrv; do
+            echo nameserver $s
+        done
+    fi >> /tmp/net.$netif.resolv.conf
+}
+
+# Handle static ip configuration
+do_static() {
+    strstr $ip '*:*:*' && load_ipv6
+
+    ip link set $netif up
+    wait_for_if_up $netif
+    [ -n "$macaddr" ] && ip link set address $macaddr
+    [ -n "$mtu" ] && ip link set mtu $mtu
+    # do not flush addr for ipv6
+    strstr $ip '*:*:*' || \
+        ip addr flush dev $netif
+    ip addr add $ip/$mask brd + dev $netif
+
+    [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
+    [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
+
+    namesrv=$(getargs nameserver)
+    if  [ -n "$namesrv" ] ; then
+        for s in $namesrv; do
+            echo nameserver $s
+        done
+    fi >> /tmp/net.$netif.resolv.conf
+}
 
 # loopback is always handled the same way
 if [ "$netif" = "lo" ] ; then
     ip link set lo up
     ip addr add 127.0.0.1/8 dev lo
-    >/tmp/net.$netif.up
     exit 0
 fi
 
@@ -159,7 +158,7 @@ if [ -e /tmp/bond.info ]; then
 
         for slave in $bondslaves ; do
             ip link set $slave down
-            ifenslave $bondname $slave
+            echo "+$slave" > /sys/class/net/$bondname/bonding/slaves
             ip link set $slave up
             wait_for_if_up $slave
         done
@@ -178,18 +177,40 @@ fi
 
 # XXX need error handling like dhclient-script
 
+if [ -e /tmp/bridge.info ]; then
+    . /tmp/bridge.info
 # start bridge if necessary
-if [ "$netif" = "$bridgename" ] && [ ! -e /tmp/net.$bridgename.up ]; then
-    if [ "$ethname" = "$bondname" ] ; then
-        DO_BOND_SETUP=yes /sbin/ifup $bondname
-    else
-        ip link set $ethname up
+    if [ "$netif" = "$bridgename" ] && [ ! -e /tmp/net.$bridgename.up ]; then
+        brctl addbr $bridgename
+        brctl setfd $bridgename 0
+        for ethname in $ethnames ; do
+            if [ "$ethname" = "$bondname" ] ; then
+                DO_BOND_SETUP=yes ifup $bondname
+            else
+                ip link set $ethname up
+            fi
+            wait_for_if_up $ethname
+            brctl addif $bridgename $ethname
+        done
     fi
-    wait_for_if_up $ethname
-    # Create bridge and add eth to bridge
-    brctl addbr $bridgename
-    brctl setfd $bridgename 0
-    brctl addif $bridgename $ethname
+fi
+
+get_vid() {
+    case "$1" in
+    vlan*)
+        return ${1#vlan}
+        ;;
+    *.*)
+        return ${1##*.}
+        ;;
+    esac
+}
+
+if [ "$netif" = "$vlanname" ] && [ ! -e /tmp/net.$vlanname.up ]; then
+    modprobe 8021q
+    ip link set "$phydevice" up
+    wait_for_if_up "$phydevice"
+    ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname; echo $?)"
 fi
 
 # No ip lines default to dhcp
@@ -209,12 +230,12 @@ for p in $(getargs ip=); do
     ip_to_var $p
     # skip ibft
     [ "$autoconf" = "ibft" ] && continue
-	
+
     # If this option isn't directed at our interface, skip it
     [ -n "$dev" ] && [ "$dev" != "$netif" ] && continue
 
     # Store config for later use
-    for i in ip srv gw mask hostname; do
+    for i in ip srv gw mask hostname macaddr; do
         eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
     done > /tmp/net.$netif.override
 
@@ -225,10 +246,24 @@ for p in $(getargs ip=); do
             do_dhcp -6 ;;
         auto6)
             do_ipv6auto ;;
-        *) 
+        *)
             do_static ;;
     esac
+
+    case $autoconf in
+        dhcp|on|any|dhcp6)
+            ;;
+        *)
+            if [ $? -eq 0 ]; then
+                setup_net $netif
+                source_hook initqueue/online $netif
+                if [ -z "$manualup" ]; then
+                    /sbin/netroot $netif
+                fi
+            fi
+            ;;
+    esac
+
     break
 done
-
 exit 0

modules.d/40network/kill-dhclient.sh

@@ -5,7 +5,7 @@
 for f in /tmp/dhclient.*.pid; do
     [ -e $f ] || continue
     read PID < $f;
-    kill $PID;
+    kill $PID >/dev/null 2>&1
 done
 
 sleep 0.1
@@ -13,5 +13,5 @@ sleep 0.1
 for f in /tmp/dhclient.*.pid; do
     [ -e $f ] || continue
     read PID < $f;
-    kill -9 $PID;
+    kill -9 $PID >/dev/null 2>&1
 done

modules.d/40network/module-setup.sh

@@ -3,11 +3,12 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 check() {
+    local _program
     . $dracutfunctions
 
-    for program in ip arping dhclient ; do 
-        if ! type -P $program >/dev/null; then
-            derror "Could not find program \"$program\" required by network."
+    for _program in ip arping dhclient ; do
+        if ! type -P $_program >/dev/null; then
+            derror "Could not find program \"$_program\" required by network."
             return 1
         fi
     done
@@ -23,48 +24,79 @@ depends() {
 installkernel() {
     # Include wired net drivers, excluding wireless
 
-    net_module_test() {
-        local net_drivers='eth_type_trans|register_virtio_device'
-        local unwanted_drivers='/(wireless|isdn|uwb)/'
-        egrep -q $net_drivers "$1" && \
-            egrep -qv 'iw_handler_get_spy' "$1" && \
-            [[ ! $1 =~ $unwanted_drivers ]]
+    net_module_filter() {
+        local _net_drivers='eth_type_trans|register_virtio_device'
+        local _unwanted_drivers='/(wireless|isdn|uwb)/'
+        local _ret
+        # subfunctions inherit following FDs
+        local _merge=8 _side2=9
+        function nmf1() {
+            local _fname _fcont
+            while read _fname; do
+                [[ $_fname =~ $_unwanted_drivers ]] && continue
+                case "$_fname" in
+                    *.ko)    _fcont="$(<        $_fname)" ;;
+                    *.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
+                    *.ko.xz) _fcont="$(xz -dc   $_fname)" ;;
+                esac
+                [[   $_fcont =~ $_net_drivers
+                && ! $_fcont =~ iw_handler_get_spy ]] \
+                && echo "$_fname"
+            done
+        }
+        function rotor() {
+            local _f1 _f2
+            while read _f1; do
+                echo "$_f1"
+                if read _f2; then
+                    echo "$_f2" 1>&${_side2}
+                fi
+            done | nmf1 1>&${_merge}
+        }
+        # Use two parallel streams to filter alternating modules.
+        set +x
+        eval "( ( rotor ) ${_side2}>&1 | nmf1 ) ${_merge}>&1"
+        _ret=$?
+        [[ $debug ]] && set -x
+        return $_ret
     }
 
-    instmods $(filter_kernel_modules net_module_test)
+    { find_kernel_modules_by_path drivers/net; find_kernel_modules_by_path drivers/s390/net; } \
+        | net_module_filter | instmods
 
+    instmods =drivers/net/phy
     instmods ecb arc4
     # bridge modules
     instmods bridge stp llc
     instmods ipv6
     # bonding
     instmods bonding
+    # vlan
+    instmods 8021q
 }
 
 install() {
-    dracut_install ip arping tr dhclient 
-    dracut_install -o brctl ifenslave
-    inst "$moddir/ifup" "/sbin/ifup"
-    inst "$moddir/netroot" "/sbin/netroot"
-    inst "$moddir/dhclient-script" "/sbin/dhclient-script"
-    inst "$moddir/dhclient.conf" "/etc/dhclient.conf" 
+    local _arch _i _dir
+    dracut_install ip arping tr dhclient
+    dracut_install -o brctl
+    inst "$moddir/ifup.sh" "/sbin/ifup"
+    inst "$moddir/netroot.sh" "/sbin/netroot"
+    inst "$moddir/dhclient-script.sh" "/sbin/dhclient-script"
+    inst "$moddir/net-lib.sh" "/lib/net-lib.sh"
+    inst_simple "$moddir/dhclient.conf" "/etc/dhclient.conf"
     inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
     inst_hook pre-udev 60 "$moddir/net-genrules.sh"
     inst_hook cmdline 91 "$moddir/dhcp-root.sh"
+    inst_hook cmdline 95 "$moddir/parse-vlan.sh"
     inst_hook cmdline 96 "$moddir/parse-bond.sh"
     inst_hook cmdline 97 "$moddir/parse-bridge.sh"
     inst_hook cmdline 98 "$moddir/parse-ip-opts.sh"
     inst_hook cmdline 99 "$moddir/parse-ifname.sh"
-    inst_hook pre-pivot 10 "$moddir/kill-dhclient.sh"
+    inst_hook cleanup 10 "$moddir/kill-dhclient.sh"
 
-    arch=$(uname -m)
-
-    for dir in "$usrlibdir/tls/$arch" "$usrlibdir/tls" "$usrlibdir/$arch" \
-        "$usrlibdir" "$libdir"; do
-        for i in "$dir"/libnss_dns.so.* "$dir"/libnss_mdns4_minimal.so.*; do
-            [ -e "$i" ] && dracut_install "$i"
-        done
-    done
+    _arch=$(uname -m)
 
+    inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*"
+    inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*"
 }
 

modules.d/40network/net-genrules.sh

@@ -14,14 +14,14 @@ fix_bootif() {
 }
 
 # Don't continue if we don't need network
-[ -z "$netroot" ] && return;
+[ -z "$netroot" ] && ! [ -e "/tmp/net.ifaces" ] && return;
 
 # Write udev rules
 {
     # bridge: attempt only the defined interface
     if [ -e /tmp/bridge.info ]; then
         . /tmp/bridge.info
-        IFACES=$ethname
+        IFACES=${ethnames%% *}
     fi
 
     # bond: attempt only the defined interface (override bridge defines)
@@ -31,21 +31,29 @@ fix_bootif() {
         IFACES=${bondslaves%% *}
     fi
 
+    if [ -e /tmp/vlan.info ]; then
+        . /tmp/vlan.info
+        IFACES=$phydevice
+    fi
+
+    ifup='/sbin/ifup $env{INTERFACE}'
+    [ -z "$netroot" ] && ifup="$ifup -m"
+
     # BOOTIF says everything, use only that one
     BOOTIF=$(getarg 'BOOTIF=')
     if [ -n "$BOOTIF" ] ; then
         BOOTIF=$(fix_bootif "$BOOTIF")
-        printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/ifup $env{INTERFACE}"\n' "$BOOTIF"
+        printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="%s"\n' "$BOOTIF" "/sbin/initqueue --onetime $ifup"
 
     # If we have to handle multiple interfaces, handle only them.
     elif [ -n "$IFACES" ] ; then
         for iface in $IFACES ; do
-            printf 'ACTION=="add", SUBSYSTEM=="net", ENV{INTERFACE}=="%s", RUN+="/sbin/ifup $env{INTERFACE}"\n' "$iface"
+            printf 'SUBSYSTEM=="net", ENV{INTERFACE}=="%s", RUN+="%s"\n' "$iface" "/sbin/initqueue --onetime $ifup"
         done
 
     # Default: We don't know the interface to use, handle all
     else
-        printf 'ACTION=="add", SUBSYSTEM=="net", RUN+="/sbin/ifup $env{INTERFACE}"\n'
+        printf 'SUBSYSTEM=="net", RUN+="%s"\n' "/sbin/initqueue --onetime $ifup"
     fi
 
 } > /etc/udev/rules.d/60-net.rules

modules.d/40network/net-lib.sh

@@ -0,0 +1,291 @@
+#!/bin/sh
+
+get_ip() {
+    local iface="$1" ip=""
+    ip=$(ip -o -f inet addr show $iface)
+    ip=${ip%%/*}
+    ip=${ip##* }
+}
+
+iface_for_remote_addr() {
+    set -- $(ip -o route get to $1)
+    echo $5
+}
+
+iface_for_mac() {
+    local interface="" mac="$(echo $1 | tr '[:upper:]' '[:lower:]')"
+    for interface in /sys/class/net/*; do
+        if [ $(cat $interface/address) = "$mac" ]; then
+            echo ${interface##*/}
+        fi
+    done
+}
+
+iface_has_link() {
+    local interface="$1" flags=""
+    [ -n "$interface" ] || return 2
+    interface="/sys/class/net/$interface"
+    [ -d "$interface" ] || return 2
+    flags=$(cat $interface/flags)
+    echo $(($flags|0x41)) > $interface/flags # 0x41: IFF_UP|IFF_RUNNING
+    [ "$(cat $interface/carrier)" = 1 ] || return 1
+    # XXX Do we need to reset the flags here? anaconda never bothered..
+}
+
+all_ifaces_up() {
+    local iface="" IFACES=""
+    [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
+    for iface in $IFACES; do
+        [ -e /tmp/net.$iface.up ] || return 1
+    done
+}
+
+get_netroot_ip() {
+    local prefix="" server="" rest=""
+    splitsep "$1" ":" prefix server rest
+    case $server in
+        [0-9]*\.[0-9]*\.[0-9]*\.[0-9]*) echo "$server"; return 0 ;;
+    esac
+    return 1
+}
+
+ip_is_local() {
+    strstr "$(ip route get $1 2>/dev/null)" " via "
+}
+
+ifdown() {
+    local netif="$1"
+    # ip down/flush ensures that routing info goes away as well
+    ip link set $netif down
+    ip addr flush dev $netif
+    echo "#empty" > /etc/resolv.conf
+    rm -f /tmp/net.$netif.did-setup
+    # TODO: send "offline" uevent?
+}
+
+setup_net() {
+    local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES=""
+    [ -e /tmp/net.$netif.did-setup ] && return
+    [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
+    [ -z "$IFACES" ] && IFACES="$netif"
+    # run the scripts written by ifup
+    [ -e /tmp/net.$netif.gw ]            && . /tmp/net.$netif.gw
+    [ -e /tmp/net.$netif.hostname ]      && . /tmp/net.$netif.hostname
+    [ -e /tmp/net.$netif.override ]      && . /tmp/net.$netif.override
+    [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
+    # set up resolv.conf
+    [ -e /tmp/net.$netif.resolv.conf ] && \
+        cp -f /tmp/net.$netif.resolv.conf /etc/resolv.conf
+
+    # Handle STP Timeout: arping the default gateway.
+    # (or the root server, if a) it's local or b) there's no gateway.)
+    # Note: This assumes that if no router is present the
+    # root server is on the same subnet.
+
+    # Get DHCP-provided router IP, or the cmdline-provided "gw=" argument
+    [ -n "$new_routers" ] && gw_ip=${new_routers%%,*}
+    [ -n "$gw" ] && gw_ip=$gw
+
+    # Get the "netroot" IP (if there's an IP address in there)
+    netroot_ip=$(get_netroot_ip $netroot)
+
+    # try netroot if it's local (or there's no gateway)
+    if ip_is_local $netroot_ip || [ -z "$gw_ip" ]; then
+        dest="$netroot_ip"
+    else
+        dest="$gw_ip"
+    fi
+
+    unset layer2
+    if [ -f /sys/class/net/$netif/device/layer2 ]; then
+        read layer2 < /sys/class/net/$netif/device/layer2
+    fi
+
+    if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! arping -q -f -w 60 -I $netif $dest ; then
+        info "Resolving $dest via ARP on $netif failed"
+    fi
+    unset layer2
+
+    > /tmp/net.$netif.did-setup
+}
+
+save_netinfo() {
+    local netif="$1" IFACES="" f="" i=""
+    [ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces
+    # Add $netif to the front of IFACES (if it's not there already).
+    set -- "$netif"
+    for i in $IFACES; do [ "$i" != "$netif" ] && set -- "$@" "$i"; done
+    IFACES="$*"
+    for i in $IFACES; do
+        for f in /tmp/dhclient.$i.*; do
+            [ -f $f ] && cp -f $f /tmp/net.${f#/tmp/dhclient.}
+        done
+    done
+    echo $IFACES > /tmp/.net.ifaces.new
+    mv /tmp/.net.ifaces.new /tmp/net.ifaces
+}
+
+set_ifname() {
+    local name="$1" mac="$2" num=0 n=""
+    # if it's already set, return the existing name
+    for n in $(getargs ifname=); do
+        strstr "$n" "$mac" && echo ${n%%:*} && return
+    done
+    # otherwise, pick a new name and use that
+    while [ -e /sys/class/$name$num ]; do num=$(($num+1)); done
+    echo "ifname=$name$num:$mac" >> /etc/cmdline.d/45-ifname.conf
+    echo "$name$num"
+}
+
+ibft_to_cmdline() {
+    local iface="" mac="" dev=""
+    local dhcp="" ip="" gw="" mask="" hostname=""
+    modprobe -q iscsi_ibft
+    (
+        for iface in /sys/firmware/ibft/ethernet*; do
+            [ -e ${iface}/mac ] || continue
+            mac=$(read a < ${iface}/mac; echo $a)
+            [ -z "$ifname_mac" ] && continue
+            dev=$(set_ifname ibft $ifname_mac)
+            dhcp=$(read a < ${iface}/dhcp; echo $a)
+            if [ -n "$dhcp" ]; then
+                echo "ip=$dev:dhcp"
+            else
+                ip=$(read a < ${iface}/ip-addr; echo $a)
+                gw=$(read a < ${iface}/gateway; echo $a)
+                mask=$(read a < ${iface}/subnet-mask; echo $a)
+                hostname=$(read a < ${iface}/hostname; echo $a)
+                echo "ip=$ip::$gw:$mask:$hostname:$dev:none"
+            fi
+        done
+    ) >> /etc/cmdline.d/40-ibft.conf
+    # reread cmdline
+    unset CMDLINE
+}
+
+parse_iscsi_root()
+{
+    local v
+    v=${1#iscsi:}
+
+# extract authentication info
+    case "$v" in
+	*@*:*:*:*:*)
+	    authinfo=${v%%@*}
+	    v=${v#*@}
+    # allow empty authinfo to allow having an @ in iscsi_target_name like this:
+    # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
+	    if [ -n "$authinfo" ]; then
+		OLDIFS="$IFS"
+		IFS=:
+		set $authinfo
+		IFS="$OLDIFS"
+		if [ $# -gt 4 ]; then
+		    warn "Wrong authentication info in iscsi: parameter!"
+		    return 1
+		fi
+		iscsi_username=$1
+		iscsi_password=$2
+		if [ $# -gt 2 ]; then
+		    iscsi_in_username=$3
+		    iscsi_in_password=$4
+		fi
+	    fi
+	    ;;
+    esac
+
+# extract target ip
+    case "$v" in
+	[[]*[]]:*)
+	    iscsi_target_ip=${v#[[]}
+		iscsi_target_ip=${iscsi_target_ip%%[]]*}
+	    v=${v#[[]$iscsi_target_ip[]]:}
+	    ;;
+	*)
+	    iscsi_target_ip=${v%%[:]*}
+	    v=${v#$iscsi_target_ip:}
+	    ;;
+    esac
+
+# extract target name
+    case "$v" in
+	*:iqn.*)
+	    iscsi_target_name=iqn.${v##*:iqn.}
+	    v=${v%:iqn.*}:
+	    ;;
+	*:eui.*)
+	    iscsi_target_name=iqn.${v##*:eui.}
+	    v=${v%:iqn.*}:
+	    ;;
+	*:naa.*)
+	    iscsi_target_name=iqn.${v##*:naa.}
+	    v=${v%:iqn.*}:
+	    ;;
+	*)
+	    warn "Invalid iscii target name, should begin with 'iqn.' or 'eui.' or 'naa.'"
+	    return 1
+	    ;;
+    esac
+
+# parse the rest
+    OLDIFS="$IFS"
+    IFS=:
+    set $v
+    IFS="$OLDIFS"
+
+    iscsi_protocol=$1; shift # ignored
+    iscsi_target_port=$1; shift
+    if [ $# -eq 3 ]; then
+	iscsi_iface_name=$1; shift
+    fi
+    if [ $# -eq 2 ]; then
+	iscsi_netdev_name=$1; shift
+    fi
+    iscsi_lun=$1; shift
+    if [ $# -ne 0 ]; then
+	warn "Invalid parameter in iscsi: parameter!"
+	return 1
+    fi
+}
+
+ip_to_var() {
+    local v=${1}:
+    local i
+    set --
+    while [ -n "$v" ]; do
+        if [ "${v#\[*:*:*\]:}" != "$v" ]; then
+            # handle IPv6 address
+            i="${v%%\]:*}"
+            i="${i##\[}"
+            set -- "$@" "$i"
+            v=${v#\[$i\]:}
+        else
+            set -- "$@" "${v%%:*}"
+            v=${v#*:}
+        fi
+    done
+
+    unset ip srv gw mask hostname dev autoconf macaddr mtu
+    case $# in
+        0)  autoconf="error" ;;
+        1)  autoconf=$1 ;;
+        2)  dev=$1; autoconf=$2 ;;
+        3)  dev=$1; autoconf=$2; mtu=$3 ;;
+        4)  dev=$1; autoconf=$2; mtu=$3; macaddr=$4 ;;
+        *)  ip=$1; srv=$2; gw=$3; mask=$4; hostname=$5; dev=$6; autoconf=$7; mtu=$8; macaddr=$9 ;;
+    esac
+    # anaconda-style argument cluster
+    if strstr "$autoconf" "*.*.*.*"; then
+        ip="$autoconf"
+        gw=$(getarg gateway=)
+        mask=$(getarg netmask=)
+        hostname=$(getarg hostname=)
+        dev=$(getarg ksdevice=)
+        autoconf="none"
+        mtu=$(getarg mtu=)
+        case "$dev" in
+            # ignore fancy values for ksdevice=XXX
+            link|bootif|BOOTIF|ibft|*:*:*:*:*:*) dev="" ;;
+        esac
+    fi
+}

modules.d/40network/netroot

@@ -1,149 +0,0 @@
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-PATH=$PATH:/sbin:/usr/sbin
-
-type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
-
-# Huh? Empty $1?
-[ -z "$1" ] && exit 1
-
-# Huh? No interface config?
-[ ! -e /tmp/net.$1.up ] && exit 1
-
-# There's no sense in doing something if no (net)root info is available
-# or root is already there
-[ -e /tmp/root.info ] || exit 1
-. /tmp/root.info
-[ -d $NEWROOT/proc ] && exit 0
-[ -z "$netroot" ] && exit 1
-
-# Let's see if we have to wait for other interfaces
-# Note: exit works just fine, since the last interface to be 
-#       online'd should see all files
-[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
-for iface in $IFACES ; do
-    [ -e /tmp/net.$iface.up ] || exit 1
-done
-
-# Set or override primary interface 
-netif=$1
-[ -e "/tmp/net.bootdev" ] && read netif < /tmp/net.bootdev
-
-# Figure out the handler for root=dhcp by recalling all netroot cmdline 
-# handlers
-if [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] ; then
-    # Unset root so we can check later
-    unset root
-
-    # Load dhcp options
-    [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
-
-    # If we have a specific bootdev with no dhcpoptions or empty root-path, 
-    # we die. Otherwise we just warn
-    if [ -z "$new_root_path" ] ; then
-        [ -n "$BOOTDEV" ] && die "No dhcp root-path received for '$BOOTDEV'"
-        warn "No dhcp root-path received for '$BOOTDEV' trying other interfaces if available"
-        exit 1
-    fi
-
-    # Set netroot to new_root_path, so cmdline parsers don't call
-    netroot=$new_root_path
-
-    # FIXME!
-    for f in $hookdir/cmdline/90*.sh; do
-        [ -f "$f" ] && . "$f";
-    done
-else 
-    rootok="1"
-fi
-
-# Check: do we really know how to handle (net)root?
-[ -z "$root" ] && die "No or empty root= argument"
-[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
-
-handler=${netroot%%:*}
-handler=${handler%%4}
-handler="/sbin/${handler}root"
-if [ -z "$netroot" ] || [ ! -e "$handler" ] ; then
-    die "No handler for netroot type '$netroot'"
-fi
-
-# We're here, so we can assume that upping interfaces is now ok
-[ -z "$IFACES" ] && IFACES="$netif"
-for iface in $IFACES ; do
-    . /tmp/net.$iface.up
-done
-
-[ -e /tmp/net.$netif.gw ]          && . /tmp/net.$netif.gw
-[ -e /tmp/net.$netif.hostname ]    && . /tmp/net.$netif.hostname
-[ -e /tmp/net.$netif.resolv.conf ] && cp -f /tmp/net.$netif.resolv.conf /etc/resolv.conf
-
-# Load interface options
-[ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override
-[ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
-
-# Handle STP Timeout: arping the default router if root server is
-# unknown or not local, or if not available the root server.
-# Note: This assumes that if no router is present the
-# root server is on the same subnet.
-#
-# TODO There's some netroot variants that don't (yet) have their 
-# server-ip netroot
-
-# Get router IP if set
-[ -n "$new_routers" ] && gw_ip=${new_routers%%,*}
-[ -n "$gw" ] && gw_ip=$gw
-# Get root server IP if set
-if [ -n "$netroot" ]; then
-    dummy=${netroot#*:}
-    dummy=${dummy%%:*}
-    case "$dummy" in
-        [0-9]*\.[0-9]*\.[0-9]*\.[0-9]*) netroot_ip=$dummy;;
-    esac
-fi
-# Default arping dest to router
-dest="$gw_ip"
-# Change to arping root server if appropriate
-if [ -n "$netroot_ip" ]; then
-    if [ -z "$dest" ]; then
-         # no gateway so check root server
-        dest="$netroot_ip"
-    else
-        r=$(ip route get "$netroot_ip")
-        if ! strstr "$r" ' via ' ; then
-            # local root server, so don't arping gateway
-            dest="$netroot_ip"
-        fi
-    fi
-fi
-if [ -n "$dest" ] && ! arping -q -f -w 60 -I $netif $dest ; then
-    die "Resolving $dest via ARP on $netif failed"
-fi
-
-# Source netroot hooks before we start the handler
-source_all netroot
-
-# Run the handler; don't store the root, it may change from device to device
-# XXX other variables to export?
-if $handler $netif $netroot $NEWROOT; then
-    # Network rootfs mount successful
-    for iface in $IFACES ; do
-        [ -f /tmp/dhclient.$iface.lease ] &&    cp /tmp/dhclient.$iface.lease    /tmp/net.$iface.lease
-        [ -f /tmp/dhclient.$iface.dhcpopts ] && cp /tmp/dhclient.$iface.dhcpopts /tmp/net.$iface.dhcpopts
-    done
-
-    # Save used netif for later use
-    [ ! -f /tmp/net.ifaces ] && echo $netif > /tmp/net.ifaces
-else 
-    warn "Mounting root via '$netif' failed"
-    # If we're trying with multiple interfaces, put that one down.
-    # ip down/flush ensures that routeing info goes away as well
-    if [ -z "$BOOTDEV" ] ; then
-        ip link set $netif down
-        ip addr flush dev $netif
-        echo "#empty" > /etc/resolv.conf
-    fi
-fi
-exit 0

modules.d/40network/netroot.sh

@@ -0,0 +1,73 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+PATH=/usr/sbin:/usr/bin:/sbin:/bin
+command -v getarg >/dev/null    || . /lib/dracut-lib.sh
+command -v setup_net >/dev/null || . /lib/net-lib.sh
+
+# Huh? Empty $1?
+[ -z "$1" ] && exit 1
+
+# [ ! -z $2 ] means this is for manually bringing up network
+# instead of real netroot; If It's called without $2, then there's
+# no sense in doing something if no (net)root info is available
+# or root is already there
+[ -d $NEWROOT/proc ] && exit 0
+[ -z "$netroot" ] && exit 1
+
+# Set or override primary interface
+netif=$1
+[ -e "/tmp/net.bootdev" ] && read netif < /tmp/net.bootdev
+
+# Figure out the handler for root=dhcp by recalling all netroot cmdline
+# handlers when this is not called from manually network bringing up.
+if [ -z "$2" ]; then
+    if [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] ; then
+        # Unset root so we can check later
+        unset root
+
+        # Load dhcp options
+        [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
+
+        # If we have a specific bootdev with no dhcpoptions or empty root-path,
+        # we die. Otherwise we just warn
+        if [ -z "$new_root_path" ] ; then
+            [ -n "$BOOTDEV" ] && die "No dhcp root-path received for '$BOOTDEV'"
+            warn "No dhcp root-path received for '$BOOTDEV' trying other interfaces if available"
+            exit 1
+        fi
+
+        # Set netroot to new_root_path, so cmdline parsers don't call
+        netroot=$new_root_path
+
+        # FIXME!
+        for f in $hookdir/cmdline/90*.sh; do
+            [ -f "$f" ] && . "$f";
+        done
+    else
+        rootok="1"
+    fi
+
+    # Check: do we really know how to handle (net)root?
+    [ -z "$root" ] && die "No or empty root= argument"
+    [ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
+
+    handler=${netroot%%:*}
+    handler=${handler%%4}
+    handler=$(command -v ${handler}root)
+    if [ -z "$netroot" ] || [ ! -e "$handler" ] ; then
+        die "No handler for netroot type '$netroot'"
+    fi
+fi
+
+# Source netroot hooks before we start the handler
+source_hook netroot $netif
+
+# Run the handler; don't store the root, it may change from device to device
+# XXX other variables to export?
+if $handler $netif $netroot $NEWROOT; then
+    # Network rootfs mount successful - save interface info for ifcfg etc.
+    save_netinfo $netif
+fi
+exit 0

modules.d/40network/parse-bond.sh

@@ -13,11 +13,9 @@
 # return if bond already parsed
 [ -n "$bondname" ] && return
 
-# Check if bond parameter is valid 
+# Check if bond parameter is valid
 if getarg bond= >/dev/null ; then
-    if [ -z "$netroot" ] ; then
-        die "No netboot configured, bond is invalid"
-    fi
+    :
 fi
 
 # We translate list of slaves to space-separated here to mwke it easier to loop over them in ifup
@@ -46,7 +44,7 @@ unset bondname bondslaves bondoptions
 if getarg bond >/dev/null; then
     # Read bond= parameters if they exist
     bond="$(getarg bond=)"
-    if [ ! "$bond" = "bond" ]; then 
+    if [ ! "$bond" = "bond" ]; then
         parsebond "$(getarg bond=)"
     fi
     # Simple default bond

modules.d/40network/parse-bridge.sh

@@ -3,19 +3,18 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Format:
-#       bridge=<bridgename>:<ethname>
+#       bridge=<bridgename>:<ethnames>
 #
+#       <ethnames> is a comma-separated list of physical (ethernet) interfaces
 #       bridge without parameters assumes bridge=br0:eth0
 #
 
 # return if bridge already parsed
 [ -n "$bridgename" ] && return
 
-# Check if bridge parameter is valid 
+# Check if bridge parameter is valid
 if getarg bridge= >/dev/null ; then
-    if [ -z "$netroot" ] ; then
-        die "No netboot configured, bridge is invalid"
-    fi
+    command -v brctl >/dev/null 2>&1 || die "No 'brctl' installed" 
 fi
 
 parsebridge() {
@@ -26,16 +25,16 @@ parsebridge() {
         v=${v#*:}
     done
 
-    unset bridgename ethname
+    unset bridgename ethnames
     case $# in
-        0)  bridgename=br0; ethname=$iface ;;
+        0)  bridgename=br0; ethnames=$iface ;;
         1)  die "bridge= requires two parameters" ;;
-        2)  bridgename=$1; ethname=$2 ;;
+        2)  bridgename=$1; ethnames=$(echo $2|tr "," " ") ;;
         *)  die "bridge= requires two parameters" ;;
     esac
 }
 
-unset bridgename ethname
+unset bridgename ethnames
 
 iface=eth0
 if [ -e /tmp/bond.info ]; then
@@ -45,19 +44,18 @@ if [ -e /tmp/bond.info ]; then
     fi
 fi
 
-# Parse bridge for bridgename and ethname
-if getarg bridge >/dev/null; then
+# Parse bridge for bridgename and ethnames
+if bridge="$(getarg bridge)"; then
     # Read bridge= parameters if they exist
-    bridge="$(getarg bridge=)"
-    if [ ! "$bridge" = "bridge" ]; then 
-        parsebridge "$(getarg bridge=)"
+    if [ -n "$bridge" ]; then
+        parsebridge $bridge
     fi
     # Simple default bridge
     if [ -z "$bridgename" ]; then
         bridgename=br0
-        ethname=$iface
+        ethnames=$iface
     fi
     echo "bridgename=$bridgename" > /tmp/bridge.info
-    echo "ethname=$ethname" >> /tmp/bridge.info
+    echo "ethnames=\"$ethnames\"" >> /tmp/bridge.info
     return
 fi

modules.d/40network/parse-ifname.sh

@@ -25,7 +25,8 @@ parse_ifname_opts() {
     case $# in
         7)
             ifname_if=$1
-            ifname_mac=$2:$3:$4:$5:$6:$7
+            # udev requires MAC addresses to be lower case
+            ifname_mac=`echo $2:$3:$4:$5:$6:$7 | tr '[:upper:]' '[:lower:]'`
             ;;
         *)
             die "Invalid arguments for ifname="

modules.d/40network/parse-ip-opts.sh

@@ -5,24 +5,17 @@
 # Format:
 #       ip=[dhcp|on|any]
 #
-#       ip=<interface>:[dhcp|on|any]
+#       ip=<interface>:[dhcp|on|any][:[<mtu>][:<macaddr>]]
 #
-#       ip=<client-IP-number>:<server-id>:<gateway-IP-number>:<netmask>:<client-hostname>:<interface>:[dhcp|on|any|none|off]
+#       ip=<client-IP-number>:<server-IP-number>:<gateway-IP-number>:<netmask>:<client-hostname>:<interface>:{dhcp|on|any|none|off}[:[<mtu>][:<macaddr>]]
 #
 # When supplying more than only ip= line, <interface> is mandatory and
 # bootdev= must contain the name of the primary interface to use for
 # routing,dns,dhcp-options,etc.
 #
 
-type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
-
-# Check if ip= lines should be used
-if getarg ip= >/dev/null ; then
-    if [ -z "$netroot" ] ; then
-        echo "Warning: No netboot configured, ignoring ip= lines"
-        return;
-    fi
-fi
+command -v getarg >/dev/null          || . /lib/dracut-lib.sh
+command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
 
 # Don't mix BOOTIF=macaddr from pxelinux and ip= lines
 getarg ip= >/dev/null && getarg BOOTIF= >/dev/null && \
@@ -38,12 +31,13 @@ fi
 
 # Count ip= lines to decide whether we need bootdev= or not
 if [ -z "$NEEDBOOTDEV" ] ; then
-    local count=0
+    count=0
     for p in $(getargs ip=); do
         count=$(( $count + 1 ))
     done
     [ $count -gt 1 ] && NEEDBOOTDEV=1
 fi
+unset count
 
 # If needed, check if bootdev= contains anything usable
 if [ -n "$NEEDBOOTDEV" ] ; then
@@ -51,41 +45,15 @@ if [ -n "$NEEDBOOTDEV" ] ; then
     [ -z "$BOOTDEV" ] && die "Bootdev argument is empty"
 fi
 
-if [ "ibft" = "$(getarg ip=)" ]; then
-    modprobe ibft
-    num=0
-    (   
-	for iface in /sys/firmware/ibft/ethernet*; do
-	    [ -e ${iface}/mac ] || continue
-            ifname_mac=$(read a < ${iface}/mac; echo $a)
-	    [ -z "$ifname_mac" ] || continue
-            ifname_if=ibft$num
-	    num=$(( $num + 1 ))
-	    echo "ifname=$ifname_if:$ifname_mac"
-	    dev=$ifname_if
-
-	    dhcp=$(read a < ${iface}/dhcp; echo $a)
-	    if [ -n "$dhcp" ]; then
-		echo "ip=$dev:dhcp"
-	    else
-		ip=$(read a < ${iface}/ip-addr; echo $a)
-		gw=$(read a < ${iface}/gateway; echo $a)
-		mask=$(read a < ${iface}/subnet-mask; echo $a)
-		hostname=$(read a < ${iface}/hostname; echo $a)
-		echo "ip=$ip::$gw:$mask:$hostname:$dev:none"
-	    fi
-	done
-    ) >> /etc/cmdline
-    # reread cmdline
-    unset CMDLINE
-fi
+# If ibft is requested, read ibft vals and write ip=XXX cmdline args
+[ "ibft" = "$(getarg ip=)" ] && ibft_to_cmdline
 
 # Check ip= lines
 # XXX Would be nice if we could errorcheck ip addresses here as well
 for p in $(getargs ip=); do
     ip_to_var $p
 
-    # skip ibft
+    # skip ibft since we did it above
     [ "$autoconf" = "ibft" ] && continue
 
     # We need to have an ip= line for the specified bootdev
@@ -101,7 +69,7 @@ for p in $(getargs ip=); do
     case $autoconf in
         error) die "Error parsing option 'ip=$p'";;
         bootp|rarp|both) die "Sorry, ip=$autoconf is currenty unsupported";;
-        none|off) \
+        none|off)
             [ -z "$ip" ] && \
             die "For argument 'ip=$p'\nValue '$autoconf' without static configuration does not make sense"
             [ -z "$mask" ] && \
@@ -147,7 +115,7 @@ for p in $(getargs ip=); do
 done
 
 # This ensures that BOOTDEV is always first in IFACES
-if [ -n "$BOOTDEV" ] && [ -n "$IFACES" ] ; then 
+if [ -n "$BOOTDEV" ] && [ -n "$IFACES" ] ; then
     IFACES="${IFACES%$BOOTDEV*} ${IFACES#*$BOOTDEV}"
     IFACES="$BOOTDEV $IFACES"
 fi
@@ -156,5 +124,5 @@ fi
 [ -n "$BOOTDEV" ] && echo $BOOTDEV > /tmp/net.bootdev
 [ -n "$IFACES" ]  && echo $IFACES > /tmp/net.ifaces
 
-# We need a ip= line for the configured bootdev= 
+# We need a ip= line for the configured bootdev=
 [ -n "$NEEDBOOTDEV" ] && [ -z "$BOOTDEVOK" ] && die "Bootdev Argument '$BOOTDEV' not found"

modules.d/40network/parse-vlan.sh

@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+# Format:
+#	vlan=<vlanname>:<phydevice>
+#
+
+# return if vlan already parsed
+[ -n "$vlanname" ] && return
+
+# Check if vlan parameter is valid
+if getarg vlan= >/dev/null ; then
+    :
+fi
+
+parsevlan() {
+    local v=${1}:
+    set --
+    while [ -n "$v" ]; do
+        set -- "$@" "${v%%:*}"
+        v=${v#*:}
+    done
+
+    unset vlanname phydevice
+    case $# in
+    2)  vlanname=$1; phydevice=$2 ;;
+    *)  die "vlan= requires two parameters" ;;
+    esac
+}
+
+unset vlanname phydevice
+
+if getarg vlan >/dev/null; then
+    # Read vlan= parameters if they exist
+    vlan="$(getarg vlan=)"
+    if [ ! "$vlan" = "vlan" ]; then
+        parsevlan "$(getarg vlan=)"
+    fi
+
+    echo "vlanname=\"$vlanname\"" > /tmp/vlan.info
+    echo "phydevice=\"$phydevice\"" >> /tmp/vlan.info
+    return
+fi

modules.d/45ifcfg/write-ifcfg.sh

@@ -17,12 +17,78 @@ if [ -e /tmp/bridge.info ]; then
     . /tmp/bridge.info
 fi
 
-mkdir -p /tmp/ifcfg/
+mkdir -m 0755 -p /tmp/ifcfg/
+mkdir -m 0755 -p /tmp/ifcfg-leases/
+
+get_config_line_by_subchannel()
+{
+    local CHANNEL
+    local line
+
+    CHANNELS="$1"
+    while read line; do
+        if strstr "$line" "$CHANNELS"; then
+            echo $line
+            return 0
+        fi
+    done < /etc/ccw.conf
+    return 1
+}
+
+print_s390() {
+    local _netif
+    local SUBCHANNELS
+    local OPTIONS
+    local NETTYPE
+    local CONFIG_LINE
+    local i
+    local channel
+    local OLD_IFS
+
+    _netif="$1"
+    # if we find ccw channel, then use those, instead of
+    # of the MAC
+    SUBCHANNELS=$({
+        for i in /sys/class/net/$_netif/device/cdev[0-9]*; do
+            [ -e $i ] || continue
+            channel=$(readlink -f $i)
+            echo -n "${channel##*/},"
+        done
+    })
+    [ -n "$SUBCHANNELS" ] || return 1
+
+    SUBCHANNELS=${SUBCHANNELS%,}
+    echo "SUBCHANNELS=\"${SUBCHANNELS}\""
+    CONFIG_LINE=$(get_config_line_by_subchannel $SUBCHANNELS)
+
+    [ $? -ne 0 -o -z "$CONFIG_LINE" ] && return
+
+    OLD_IFS=$IFS
+    IFS=","
+    set -- $CONFIG_LINE
+    IFS=$OLD_IFS
+    NETTYPE=$1
+    shift
+    SUBCHANNELS="$1"
+    OPTIONS=""
+    shift
+    while [ $# -gt 0 ]; do
+        case $1 in
+            *=*) OPTIONS="$OPTIONS $1";;
+        esac
+        shift
+    done
+    OPTIONS=${OPTIONS## }
+    echo "NETTYPE=\"${NETTYPE}\""
+    echo "OPTIONS=\"${OPTIONS}\""
+}
+
 
 for netif in $IFACES ; do
     # bridge?
     unset bridge
     unset bond
+    uuid=$(cat /proc/sys/kernel/random/uuid)
     if [ "$netif" = "$bridgename" ]; then
         bridge=yes
     elif [ "$netif" = "$bondname" ]; then
@@ -31,20 +97,27 @@ for netif in $IFACES ; do
     fi
     cat /sys/class/net/$netif/address > /tmp/net.$netif.hwaddr
     {
-        echo "# Generated by dracut initrd" 
+        echo "# Generated by dracut initrd"
         echo "DEVICE=$netif"
         echo "ONBOOT=yes"
         echo "NETBOOT=yes"
+        echo "UUID=$uuid"
+        [ -n "$mtu" ] && echo "MTU=$mtu"
         if [ -f /tmp/net.$netif.lease ]; then
             strstr "$ip" '*:*:*' &&
-            echo "DHCPV6C=yes" 
-            echo "BOOTPROTO=dhcp" 
+            echo "DHCPV6C=yes"
+            echo "BOOTPROTO=dhcp"
+            cp /tmp/net.$netif.lease /tmp/ifcfg-leases/dhclient-$uuid-$netif.lease
         else
-            echo "BOOTPROTO=none" 
+            echo "BOOTPROTO=none"
         # If we've booted with static ip= lines, the override file is there
-            . /tmp/net.$netif.override 
+            [ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override
             echo "IPADDR=$ip"
-            echo "NETMASK=$mask"
+            if strstr "$mask" "."; then
+                echo "NETMASK=$mask"
+            else
+                echo "PREFIX=$mask"
+            fi
             [ -n "$gw" ] && echo "GATEWAY=$gw"
         fi
     } > /tmp/ifcfg/ifcfg-$netif
@@ -53,9 +126,15 @@ for netif in $IFACES ; do
     if [ -z "$bridge" ] && [ -z "$bond" ]; then
         # standard interface
         {
-            echo "HWADDR=$(cat /sys/class/net/$netif/address)"
+            if [ -n "$macaddr" ]; then
+                echo "MACADDR=$macaddr"
+            else
+                echo "HWADDR=\"$(cat /sys/class/net/$netif/address)\""
+            fi
+            print_s390 $netif
             echo "TYPE=Ethernet"
-            echo "NAME=\"Boot Disk\"" 
+            echo "NAME=\"Boot Disk\""
+            [ -n "$mtu" ] && echo "MTU=$mtu"
         } >> /tmp/ifcfg/ifcfg-$netif
     fi
 
@@ -88,7 +167,7 @@ for netif in $IFACES ; do
         # bridge
         {
             echo "TYPE=Bridge"
-            echo "NAME=\"Boot Disk\"" 
+            echo "NAME=\"Boot Disk\""
         } >> /tmp/ifcfg/ifcfg-$netif
         if [ "$ethname" = "$bondname" ] ; then
             {
@@ -100,7 +179,7 @@ for netif in $IFACES ; do
                 # This variable is an indicator of a bond interface for initscripts
                 echo "BONDING_OPTS=\"$bondoptions\""
                 echo "BRIDGE=$netif"
-                echo "NAME=\"$bondname\"" 
+                echo "NAME=\"$bondname\""
             } >> /tmp/ifcfg/ifcfg-$bondname
             for slave in $bondslaves ; do
                 # write separate ifcfg file for the raw eth interface
@@ -131,12 +210,21 @@ for netif in $IFACES ; do
             } >> /tmp/ifcfg/ifcfg-$ethname
         fi
     fi
+    i=1
+    for ns in $(getargs nameserver); do
+        echo "DNS${i}=${ns}" >> /tmp/ifcfg/ifcfg-$netif
+        i=$((i+1))
+    done
 done
 
 # Pass network opts
-mkdir -p /run/initramfs
-cp /tmp/net.* /run/initramfs/ >/dev/null 2>&1
-mkdir -p /run/initramfs/state/etc/sysconfig/network-scripts/
-cp /tmp/net.$netif.resolv.conf /run/initramfs/state/etc/ >/dev/null 2>&1
-echo "files /etc/sysconfig/network-scripts" > /run/initramfs/rwtab
-cp -a /tmp/ifcfg/* /run/initramfs/state/etc/sysconfig/network-scripts/ >/dev/null 2>&1
+mkdir -m 0755 -p /run/initramfs/state/etc/sysconfig/network-scripts
+mkdir -m 0755 -p /run/initramfs/state/var/lib/dhclient
+echo "files /etc/sysconfig/network-scripts" >> /run/initramfs/rwtab
+echo "files /var/lib/dhclient" >> /run/initramfs/rwtab
+{
+    cp /tmp/net.* /run/initramfs/
+    cp /tmp/net.$netif.resolv.conf /run/initramfs/state/etc/resolv.conf
+    copytree /tmp/ifcfg /run/initramfs/state/etc/sysconfig/network-scripts
+    cp /tmp/ifcfg-leases/* /run/initramfs/state/var/lib/dhclient
+} > /dev/null 2>&1

modules.d/45url-lib/module-setup.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+# module-setup for url-lib
+
+check() {
+    command -v curl >/dev/null || return 1
+    return 255
+}
+
+depends() {
+    echo network
+    return 0
+}
+
+install() {
+    inst "$moddir/url-lib.sh" "/lib/url-lib.sh"
+    dracut_install curl
+    mkdir -m 0755 -p "$initdir/etc/ssl/certs"
+    if ! inst_any -t /etc/ssl/certs/ca-bundle.crt \
+            /etc/ssl/certs/ca-bundle.crt \
+            /etc/ssl/certs/ca-certificates.crt; then
+        dwarn "Couldn't find SSL CA cert bundle; HTTPS won't work."
+    fi
+}
+

modules.d/45url-lib/url-lib.sh

@@ -0,0 +1,118 @@
+#!/bin/sh
+# url-lib.sh - functions for handling URLs (file fetching etc.)
+#
+# Authors:
+#   Will Woods <wwoods@redhat.com>
+
+type mkuniqdir >/dev/null 2>&1 || . /lib/dracut-lib.sh
+
+# fetch_url URL [OUTFILE]
+#   fetch the given URL to a locally-visible location.
+#   if OUTFILE is given, the URL will be fetched to that filename,
+#   overwriting it if present.
+#   If the URL is something mountable (e.g. nfs://) and no OUTFILE is given,
+#   the server will be left mounted until pre-pivot.
+#   the return values are as follows:
+#   0: success
+#   253: unknown error (file missing)
+#   254: unhandled URL scheme / protocol
+#   255: bad arguments / unparseable URLs
+#   other: fetch command failure (whatever curl/mount/etc return)
+fetch_url() {
+    local url="$1" outloc="$2"
+    local handler="$(get_url_handler $url)"
+    [ -n "$handler" ] || return 254
+    [ -n "$url" ] || return 255
+    $handler "$url" "$outloc"
+}
+
+# get_url_handler URL
+#   returns the first HANDLERNAME corresponding to the URL's scheme
+get_url_handler() {
+    local scheme="${1%%:*}" item=""
+    for item in $url_handler_map; do
+        [ "$scheme" = "${item%%:*}" ] && echo "${item#*:}" && return 0
+    done
+    return 1
+}
+
+# add_url_handler HANDLERNAME SCHEME [SCHEME...]
+#   associate the named handler with the named scheme(s).
+add_url_handler() {
+    local handler="$1"; shift
+    local schemes="$@" scheme=""
+    set --
+    for scheme in $schemes; do
+        [ "$(get_url_handler $scheme)" = "$handler" ] && continue
+        set -- "$@" "$scheme:$handler"
+    done
+    set -- $@ $url_handler_map # add new items to *front* of list
+    url_handler_map="$@"
+}
+
+### HTTP, HTTPS, FTP #################################################
+
+export CURL_HOME="/run/initramfs/url-lib"
+mkdir -p $CURL_HOME
+curl_args="--location --retry 3 --fail --show-error"
+
+curl_fetch_url() {
+    local url="$1" outloc="$2"
+    echo "$url" > /proc/self/fd/0
+    if [ -n "$outloc" ]; then
+        curl $curl_args --output "$outloc" "$url" || return $?
+    else
+        local outdir="$(mkuniqdir /tmp curl_fetch_url)"
+        ( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
+        outloc="$outdir/$(ls -A $outdir)"
+    fi
+    [ -f "$outloc" ] || return 253
+    if [ -z "$2" ]; then echo "$outloc" ; fi
+}
+add_url_handler curl_fetch_url http https ftp
+
+set_http_header() {
+    echo "header = \"$1: $2\"" >> $CURL_HOME/.curlrc
+}
+
+### NFS ##############################################################
+
+[ -e /lib/nfs-lib.sh ] && . /lib/nfs-lib.sh
+
+nfs_already_mounted() {
+    local server="$1" path="$2" localdir="" s="" p=""
+    cat /proc/mounts | while read src mnt rest; do
+        splitsep ":" "$src" s p
+        if [ "$server" = "$s" ]; then
+            if [ "$path" = "$p" ]; then
+                echo $mnt
+            elif str_starts "$path" "$p"; then
+                echo $mnt/${path#$p/}
+            fi
+        fi
+    done
+}
+
+nfs_fetch_url() {
+    local url="$1" outloc="$2" nfs="" server="" path="" options=""
+    nfs_to_var "$url" || return 255
+    local filepath="${path%/*}" filename="${path##*/}" mntdir=""
+
+    # skip mount if server:/filepath is already mounted
+    mntdir=$(nfs_already_mounted $server $path)
+    if [ -z "$mntdir" ]; then
+        local mntdir="$(mkuniqdir /run nfs_mnt)"
+        mount_nfs $nfs:$server:$filepath${options:+:$options} $mntdir
+        # lazy unmount during pre-pivot hook
+        inst_hook --hook pre-pivot --name 99url-lib-umount-nfs umount -l $mntdir
+    fi
+
+    if [ -z "$outloc" ]; then
+        outloc="$mntdir/$filename"
+    else
+        cp -f "$mntdir/$filename" "$outloc" || return $?
+    fi
+    [ -f "$outloc" ] || return 253
+    if [ -z "$2" ]; then echo "$outloc" ; fi
+}
+command -v nfs_to_var >/dev/null && add_url_handler nfs_fetch_url nfs nfs4

modules.d/50gensplash/gensplash-pretrigger.sh

@@ -9,8 +9,9 @@ if getargbool 1 rd.splash -n rd_NO_SPLASH; then
 
     info "Starting Gentoo Splash"
 
-    /lib/udev/console_init tty0
+    [ -x /lib/udev/console_init ] && /lib/udev/console_init /dev/tty0
     CDROOT=0
     . /lib/gensplash-lib.sh
     splash init
+    [ -x /lib/udev/console_init ] && /lib/udev/console_init /dev/tty0
 fi

modules.d/50gensplash/module-setup.sh

@@ -13,55 +13,57 @@ depends() {
 }
 
 install() {
+    local _opts
+    local _splash_theme
+    local _splash_res
+
     call_splash_geninitramfs() {
-        local out ret 
+        local _out _ret
 
-        out=$(splash_geninitramfs -c "$1" ${@:2} 2>&1)
-        ret=$?
+        _out=$(splash_geninitramfs -c "$1" ${@:2} 2>&1)
+        _ret=$?
 
-        if [[ ${out} ]]; then
+        if [[ ${_out} ]]; then
             local IFS='
 '
-            for line in ${out}; do
+            for line in ${_out}; do
                 if [[ ${line} =~ ^Warning ]]; then
                     dwarn "${line}"
                 else
                     derror "${line}"
-                    (( ret == 0 )) && ret=1
+                    (( $_ret == 0 )) && _ret=1
                 fi
             done
         fi
 
-        return ${ret}
+        return ${_ret}
     }
 
-
     type -P splash_geninitramfs >/dev/null || return 1
 
-    opts=''
-
+    _opts=''
     if [[ ${DRACUT_GENSPLASH_THEME} ]]; then
         # Variables from the environment
         # They're supposed to be set up by e.g. Genkernel in basis of cmdline args.
         # If user set them he/she would expect to be included only given theme
         # rather then all even if we're building generic initramfs.
-        SPLASH_THEME=${DRACUT_GENSPLASH_THEME}
-        SPLASH_RES=${DRACUT_GENSPLASH_RES}
+        _splash_theme=${DRACUT_GENSPLASH_THEME}
+        _splash_res=${DRACUT_GENSPLASH_RES}
     elif [[ ${hostonly} ]]; then
         # Settings from config only in hostonly
         [[ -e /etc/conf.d/splash ]] && source /etc/conf.d/splash
-        [[ ! ${SPLASH_THEME} ]] && SPLASH_THEME=default
-        [[ ${SPLASH_RES} ]] && opts+=" -r ${SPLASH_RES}"
+        [[ ! ${_splash_theme} ]] && _splash_theme=default
+        [[ ${_splash_res} ]] && _opts+=" -r ${_splash_res}"
     else
         # generic
-        SPLASH_THEME=--all
+        _splash_theme=--all
     fi
 
-    dinfo "Installing Gentoo Splash (using the ${SPLASH_THEME} theme)"
+    dinfo "Installing Gentoo Splash (using the ${_splash_theme} theme)"
 
     pushd "${initdir}" >/dev/null
     mv dev dev.old
-    call_splash_geninitramfs "${initdir}" ${opts} ${SPLASH_THEME} || {
+    call_splash_geninitramfs "${initdir}" ${_opts} ${_splash_theme} || {
         derror "Could not build splash"
         return 1
     }

modules.d/50plymouth/module-setup.sh

@@ -3,6 +3,7 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 check() {
+    [[ "$mount_needs" ]] && return 1
     [[ -x /sbin/plymouthd && -x /bin/plymouth && -x /usr/sbin/plymouth-set-default-theme ]]
 }
 
@@ -11,9 +12,25 @@ depends() {
 }
 
 installkernel() {
+    local _modname
     # Include KMS capable drm drivers
-    for modname in $(find "$srcmods/kernel/drivers/gpu/drm" "$srcmods/extra" -name '*.ko' 2>/dev/null); do
-        grep -q drm_crtc_init  $modname && instmods $modname
+    for _modname in $(find "$srcmods/kernel/drivers/gpu/drm" "$srcmods/extra" \( -name '*.ko' -o -name '*.ko.gz' -o -name '*.ko.xz' \) 2>/dev/null); do
+        case $_modname in
+            *.ko)      grep -q drm_crtc_init $_modname ;;
+            *.ko.gz)  zgrep -q drm_crtc_init $_modname ;;
+            *.ko.xz) xzgrep -q drm_crtc_init $_modname ;;
+        esac
+        if test $? -eq 0; then
+            # if the hardware is present, include module even if it is not currently loaded,
+            # as we could e.g. be in the installer; nokmsboot boot parameter will disable
+            # loading of the driver if needed
+            if [[ $hostonly ]] && modinfo -F alias $_modname | sed -e 's,\?,\.,g' -e 's,\*,\.\*,g' \
+                                  | grep -qxf - /sys/bus/pci/devices/*/modalias; then
+                hostonly='' instmods $_modname
+                continue
+            fi
+            instmods $_modname
+        fi
     done
 }
 
@@ -21,7 +38,7 @@ install() {
     if grep -q nash /usr/libexec/plymouth/plymouth-populate-initrd \
         || ! grep -q PLYMOUTH_POPULATE_SOURCE_FUNCTIONS /usr/libexec/plymouth/plymouth-populate-initrd \
         || [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
-        . "$moddir"/plymouth-populate-initrd
+        . "$moddir"/plymouth-populate-initrd.sh
     else
         PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
             /usr/libexec/plymouth/plymouth-populate-initrd -t $initdir

modules.d/50plymouth/plymouth-populate-initrd.sh

@@ -7,11 +7,11 @@ PLYMOUTH_THEME=$(plymouth-set-default-theme)
 inst /sbin/plymouthd /bin/plymouthd
 dracut_install /bin/plymouth \
     "${PLYMOUTH_LOGO_FILE}" \
-    /etc/system-release 
+    /etc/system-release
 
-mkdir -p "${initdir}/usr/share/plymouth"
+mkdir -m 0755 -p "${initdir}/usr/share/plymouth"
 
-if [[ $hostonly ]]; then 
+if [[ $hostonly ]]; then
     dracut_install "${usrlibdir}/plymouth/text.so" \
         "${usrlibdir}/plymouth/details.so" \
         "/usr/share/plymouth/themes/details/details.plymouth" \
@@ -34,7 +34,7 @@ else
     for x in /usr/share/plymouth/themes/{text,details}/* ; do
         [[ -f "$x" ]] || continue
         THEME_DIR=$(dirname "$x")
-        mkdir -p "${initdir}/$THEME_DIR"
+        mkdir -m 0755 -p "${initdir}/$THEME_DIR"
         dracut_install "$x"
     done
     for x in "${usrlibdir}"/plymouth/{text,details}.so ; do
@@ -44,6 +44,6 @@ else
     done
     (
         cd ${initdir}/usr/share/plymouth/themes;
-        ln -s text/text.plymouth default.plymouth 2>&1;       
+        ln -s text/text.plymouth default.plymouth 2>&1;
     )
 fi

modules.d/50plymouth/plymouth-pretrigger.sh

@@ -2,23 +2,29 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-if getargbool 1 rd.plymouth -n rd_NO_PLYMOUTH; then
-    [ -c /dev/null ] || mknod -m 0666 /dev/null c 1 3
-    # first trigger graphics subsystem
-    udevadm trigger --action=add --attr-match=class=0x030000 >/dev/null 2>&1
-    # first trigger graphics and tty subsystem
-    udevadm trigger --action=add --subsystem-match=graphics --subsystem-match=drm --subsystem-match=tty >/dev/null 2>&1
+if [ -x /bin/plymouthd ]; then
+    if getargbool 1 plymouth.enable && getargbool 1 rd.plymouth -n rd_NO_PLYMOUTH; then
+        [ -c /dev/null ] || mknod -m 0666 /dev/null c 1 3
+        # first trigger graphics subsystem
+        udevadm trigger --action=add --attr-match=class=0x030000 >/dev/null 2>&1
+        # first trigger graphics and tty subsystem
+        udevadm trigger --action=add --subsystem-match=graphics --subsystem-match=drm --subsystem-match=tty >/dev/null 2>&1
 
-    udevadm settle --timeout=30 2>&1 | vinfo
-    [ -c /dev/zero ] || mknod -m 0666 /dev/zero c 1 5
-    [ -c /dev/tty0 ] || mknod -m 0620 /dev/tty0 c 4 0
-    [ -e /dev/systty ] || ln -s tty0 /dev/systty
-    [ -c /dev/fb0 ] || mknod -m 0660 /dev/fb0 c 29 0
-    [ -e /dev/fb ] || ln -s fb0 /dev/fb
+        udevadm settle --timeout=30 2>&1 | vinfo
+        [ -c /dev/zero ] || mknod -m 0666 /dev/zero c 1 5
+        [ -c /dev/tty0 ] || mknod -m 0620 /dev/tty0 c 4 0
+        [ -e /dev/systty ] || ln -s tty0 /dev/systty
+        [ -c /dev/fb0 ] || mknod -m 0660 /dev/fb0 c 29 0
+        [ -e /dev/fb ] || ln -s fb0 /dev/fb
 
-    info "Starting plymouth daemon"
-    [ -x /bin/plymouthd ] && /bin/plymouthd --attach-to-session
-    >/run/initramfs/plymouth
-    /lib/udev/console_init tty0
-    /bin/plymouth --show-splash 2>&1 | vinfo
+        info "Starting plymouth daemon"
+        mkdir -m 0755 /run/plymouth
+        read consoledev rest < /sys/class/tty/console/active
+        consoledev=${consoledev:-tty0}
+        [ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev"
+        [ -x /bin/plymouthd ] && /bin/plymouthd --attach-to-session --pid-file /run/plymouth/pid
+        /bin/plymouth --show-splash 2>&1 | vinfo
+        # reset tty after plymouth messed with it
+        [ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev"
+    fi
 fi

modules.d/60xen/module-setup.sh

@@ -1,41 +0,0 @@
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-check() {
-    # No Xen-detect? Boo!!
-    if ! hash xen-detect 2>/dev/null; then
-        [[ -d /usr/lib/xen-default ]] && \
-            hash -p /usr/lib/xen-default/bin/xen-detect xen-detect || return 1
-    fi
-
-    . $dracutfunctions
-    [[ $debug ]] && set -x
-
-    # Yes, we are under Xen PV env.
-    xen-detect | grep -q -v PV || return 0
-
-    return 1
-}
-
-depends() {
-    return 0
-}
-
-installkernel() {
-    for i in \
-        xenbus_probe_frontend xen-pcifront \
-        xen-fbfront xen-kbdfront xen-blkfront xen-netfront \
-        ; do
-        modinfo -k $kernel $i >/dev/null 2>&1 && instmods $i
-    done
-
-}
-
-install() {
-    hash xen-detect 2>/dev/null || \
-        hash -p /usr/lib/xen-default/bin/xen-detect xen-detect
-    inst "$(hash -t xen-detect)" /sbin/xen-detect
-    inst_hook pre-udev 40 "$moddir/xen-pre-udev.sh"
-}
-

modules.d/60xen/xen-pre-udev.sh

@@ -1,13 +0,0 @@
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-xen-detect
-RC=$?
-if [ "$RC" = "1" ] ; then
-    modprobe xenbus_probe_frontend
-    modprobe xen-kbdfront
-    modprobe xen-fbfront
-    modprobe xen-blkfront
-    modprobe xen-netfront
-    modprobe xen-pcifront
-fi

modules.d/80cms/cms-write-ifcfg.sh

@@ -0,0 +1,104 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+
+mkdir -m 0755 -p /run/initramfs/state/etc/sysconfig/network-scripts
+
+function cms_write_config()
+{
+    . /tmp/cms.conf
+    OLDIFS=$IFS
+    IFS=,
+    read -a subch_array <<< "indexzero,$SUBCHANNELS"
+    IFS=$OLDIFS
+    devbusid=${subch_array[1]}
+    if [ "$NETTYPE" = "ctc" ]; then
+	driver="ctcm"
+    else
+	driver=$NETTYPE
+    fi
+
+    DEVICE=$(cd /sys/devices/${driver}/$devbusid/net/ && set -- * && [ "$1" != "*" ] && echo $1)
+
+    uuid=$(cat /proc/sys/kernel/random/uuid)
+
+    IFCFGFILE=/run/initramfs/state/etc/sysconfig/network-scripts/ifcfg-$DEVICE
+
+    strstr "$IPADDR" '*:*:*' && ipv6=1
+
+# to please NetworkManager on startup in loader before loader reconfigures net
+    cat > /etc/sysconfig/network << EOF
+HOSTNAME=$HOSTNAME
+EOF
+    if [ "$ipv6" ]; then
+	echo "NETWORKING_IPV6=yes" >> /etc/sysconfig/network
+    else
+	echo "NETWORKING=yes" >> /etc/sysconfig/network
+    fi
+
+    cat > $IFCFGFILE << EOF
+DEVICE=$DEVICE
+UUID=$uuid
+ONBOOT=yes
+BOOTPROTO=static
+MTU=$MTU
+SUBCHANNELS=$SUBCHANNELS
+EOF
+    if [ "$ipv6" ]; then
+	cat >> $IFCFGFILE << EOF
+IPV6INIT=yes
+IPV6_AUTOCONF=no
+IPV6ADDR=$IPADDR/$NETMASK
+IPV6_DEFAULTGW=$GATEWAY
+EOF
+    else
+	cat >> $IFCFGFILE << EOF
+IPADDR=$IPADDR
+NETMASK=$NETMASK
+BROADCAST=$BROADCAST
+GATEWAY=$GATEWAY
+EOF
+    fi
+    if [ "$ipv6" ]; then
+	DNS1=$(set -- ${DNS/,/ }; echo $1)
+	DNS2=$(set -- ${DNS/,/ }; echo $2)
+    else
+	DNS1=$(set -- ${DNS/:/ }; echo $1)
+	DNS2=$(set -- ${DNS/:/ }; echo $2)
+    fi
+# real DNS config for NetworkManager to generate /etc/resolv.conf
+    [ "$DNS1" != "" ] && echo "DNS1=$DNS1" >> $IFCFGFILE
+    [ "$DNS2" != "" ] && echo "DNS2=$DNS2" >> $IFCFGFILE
+# just to please loader's readNetInfo && writeEnabledNetInfo
+# which eats DNS1,DNS2,... and generates it themselves based on DNS
+    if [ "$ipv6" ]; then
+	[ "$DNS" != "" ] && echo "DNS=\"$DNS\"" >> $IFCFGFILE
+    else
+	[ "$DNS" != "" ] && echo "DNS=\"${DNS/:/,}\"" >> $IFCFGFILE
+    fi
+# colons in SEARCHDNS already replaced with spaces above for /etc/resolv.conf
+    [ "$SEARCHDNS" != "" ] && echo "DOMAIN=\"$SEARCHDNS\"" >> $IFCFGFILE
+    [ "$NETTYPE" != "" ] && echo "NETTYPE=$NETTYPE" >> $IFCFGFILE
+    [ "$PEERID" != "" ] && echo "PEERID=$PEERID" >> $IFCFGFILE
+    [ "$PORTNAME" != "" ] && echo "PORTNAME=$PORTNAME" >> $IFCFGFILE
+    [ "$CTCPROT" != "" ] && echo "CTCPROT=$CTCPROT" >> $IFCFGFILE
+    [ "$MACADDR" != "" ] && echo "MACADDR=$MACADDR" >> $IFCFGFILE
+    optstr=""
+    for option in LAYER2 PORTNO; do
+	[ -z "${!option}" ] && continue
+	[ -n "$optstr" ] && optstr=${optstr}" "
+	optstr=${optstr}$(echo ${option} | tr [[:upper:]] [[:lower:]])"="${!option}
+    done
+# write single quotes since network.py removes double quotes but we need quotes
+    echo "OPTIONS='$optstr'" >> $IFCFGFILE
+    unset option
+    unset optstr
+    unset DNS1
+    unset DNS2
+    echo "files /etc/sysconfig/network-scripts" >> /run/initramfs/rwtab
+    echo "files /var/lib/dhclient" >> /run/initramfs/rwtab
+}
+
+[ -f /tmp/cms.conf ] && cms_write_config

modules.d/80cms/cmsifup.sh

@@ -0,0 +1,41 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+
+DEVICE=$1
+
+. /tmp/cms.conf
+
+strstr "$IPADDR" '*:*:*' && ipv6=1
+
+if [ "$ipv6" ] && ! str_starts "$IPADDR" "["; then
+    IPADDR="[$IPADDR]"
+fi
+
+if [ "$ipv6" ] && ! str_starts "$GATEWAY" "["; then
+    GATEWAY="[$GATEWAY]"
+fi
+
+if [ "$ipv6" ]; then
+    DNS1=$(set -- ${DNS/,/ }; echo $1)
+    DNS2=$(set -- ${DNS/,/ }; echo $2)
+else
+    DNS1=$(set -- ${DNS/:/ }; echo $1)
+    DNS2=$(set -- ${DNS/:/ }; echo $2)
+fi
+
+{
+    echo "ip=$IPADDR::$GATEWAY:$NETMASK:$HOSTNAME:$DEVICE:none:$MACADDR"
+    for i in $DNS1 $DNS2; do
+	echo "nameserver=$i"
+    done
+} > /etc/cmdline.d/80-cms.conf
+unset CMDLINE
+
+[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
+IFACES="$IFACES $DEVICE"
+echo "$IFACES" >> /tmp/net.ifaces
+
+ifup $DEVICE -m

modules.d/80cms/cmssetup.sh

@@ -0,0 +1,200 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+
+function sysecho () {
+    file="$1"
+    shift
+    local i=1
+    while [ $i -le 10 ] ; do
+        if [ ! -f "$file" ]; then
+            sleep 1
+            i=$((i+1))
+        else
+            break
+        fi
+    done
+    local status
+    read status < "$file"
+    if [[ ! $status == $* ]]; then
+        [ -f "$file" ] && echo $* > "$file"
+    fi
+}
+
+function dasd_settle() {
+    local dasd_status=/sys/bus/ccw/devices/$1/status
+    if [ ! -f $dasd_status ]; then
+        return 1
+    fi
+    local i=1
+    while [ $i -le 60 ] ; do
+        local status
+        read status < $dasd_status
+        case $status in
+            online|unformatted)
+                return 0 ;;
+            *)
+                sleep 0.1
+                i=$((i+1)) ;;
+        esac
+    done
+    return 1
+}
+
+function dasd_settle_all() {
+    for dasdccw in $(while read line; do echo ${line%%(*}; done < /proc/dasd/devices) ; do
+        if ! dasd_settle $dasdccw ; then
+            echo $"Could not access DASD $dasdccw in time"
+            return 1
+        fi
+    done
+    return 0
+}
+
+# prints a canonocalized device bus ID for a given devno of any format
+function canonicalize_devno()
+{
+    case ${#1} in
+        3) echo "0.0.0${1}" ;;
+        4) echo "0.0.${1}" ;;
+        *) echo "${1}" ;;
+    esac
+    return 0
+}
+
+# read file from CMS and write it to /tmp
+function readcmsfile() # $1=dasdport $2=filename
+{
+    local dev
+    local numcpus
+    local devname
+    local ret=0
+    if [ $# -ne 2 ]; then return; fi
+    # precondition: udevd created dasda block device node
+    if ! dasd_cio_free -d $1 ; then
+        echo $"DASD $1 could not be cleared from device blacklist"
+        return 1
+    fi
+
+    modprobe dasd_mod dasd=$CMSDASD
+    modprobe dasd_eckd_mod
+    udevadm settle
+
+    # precondition: dasd_eckd_mod driver incl. dependencies loaded,
+    #               dasd_mod must be loaded without setting any DASD online
+    dev=$(canonicalize_devno $1)
+    numcpus=$(
+	while read line; do
+	    if strstr "$line" "# processors"; then
+		echo ${line##*:};
+		break;
+	    fi;
+	done < /proc/cpuinfo
+    )
+
+    if [ ${numcpus} -eq 1 ]; then
+        echo 1 > /sys/bus/ccw/devices/$dev/online
+    else
+        if ! sysecho /sys/bus/ccw/devices/$dev/online 1; then
+            echo $"DASD $dev could not be set online"
+            return 1
+        fi
+        udevadm settle
+        if ! dasd_settle $dev ; then
+            echo $"Could not access DASD $dev in time"
+            return 1
+        fi
+    fi
+
+    udevadm settle
+
+    devname=$(cd /sys/bus/ccw/devices/$dev/block; set -- *; [ -b /dev/$1 ] && echo $1)
+    devname=${devname:-dasda}
+
+    [[ -d /mnt ]] || mkdir /mnt
+    if cmsfs-fuse --to=UTF-8 -a /dev/$devname /mnt; then
+	cat /mnt/$2 > /run/initramfs/$2
+        umount /mnt || umount -l /mnt
+        udevadm settle
+    else
+        echo $"Could not read conf file $2 on CMS DASD $1."
+        ret=1
+    fi
+
+    if ! sysecho /sys/bus/ccw/devices/$dev/online 0; then
+        echo $"DASD $dev could not be set offline again"
+        #return 1
+    fi
+    udevadm settle
+
+    # unbind all dasds to unload the dasd modules for a clean start
+    ( cd /sys/bus/ccw/drivers/dasd-eckd; for i in *.*; do echo $i > unbind;done)
+    udevadm settle
+    modprobe -r dasd_eckd_mod
+    udevadm settle
+    modprobe -r dasd_diag_mod
+    udevadm settle
+    modprobe -r dasd_mod
+    udevadm settle
+    return $ret
+}
+
+processcmsfile()
+{
+    source /tmp/cms.conf
+
+    if [[ $NETTYPE ]]; then
+	(
+	    echo -n $NETTYPE,$SUBCHANNELS
+	    [[ $PORTNAME ]] && echo ",portname=$PORTNAME"
+	    [[ $LAYER2 ]] && echo ",layer2=$LAYER"
+	    [[ "$NETTYPE" = "ctc" ]] && [[ $CTCPROT ]] && echo ",protocol=$CTCPROT"
+	    echo
+	) >> /etc/ccw.conf
+
+	OLDIFS=$IFS
+	IFS=,
+	read -a subch_array <<< "indexzero,$SUBCHANNELS"
+	IFS=$OLDIFS
+	devbusid=${subch_array[1]}
+        if [ "$NETTYPE" = "ctc" ]; then
+            driver="ctcm"
+        else
+            driver=$NETTYPE
+        fi
+
+	printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="%s", KERNELS=="%s", ENV{INTERFACE}=="?*", RUN+="/sbin/initqueue --onetime --unique --name cmsifup-$env{INTERFACE} /sbin/cmsifup $env{INTERFACE}"\n' "$driver" "$devbusid" > /etc/udev/rules.d/99-cms.rules
+	[[ -f /etc/udev/rules.d/60-net.rules ]] \
+	    || printf 'SUBSYSTEM=="net", ACTION=="online", RUN+="/sbin/initqueue --onetime --env netif=$env{INTERFACE} source_hook initqueue/online"\n' >> /etc/udev/rules.d/99-cms.rules
+
+	znet_cio_free
+    fi
+
+    if [[ $DASD ]]; then
+	echo $DASD | normalize_dasd_arg > /etc/dasd.conf
+	echo "options dasd_mod dasd=$DASD" > /etc/modprobe.d/dasd_mod.conf
+	dasd_cio_free
+    fi
+
+    unset _do_zfcp
+    for i in ${!FCP_*}; do
+	echo "${!i}" >> /etc/zfcp.conf
+	_do_zfcp=1
+    done
+    [[ $_do_zfcp ]] && zfcp_cio_free
+    unset _do_zfcp
+}
+
+[[ $CMSDASD ]] || CMSDASD=$(getarg "CMSDASD=")
+[[ $CMSCONFFILE ]] || CMSCONFFILE=$(getarg "CMSCONFFILE=")
+
+# Parse configuration
+if [ -n "$CMSDASD" -a -n "$CMSCONFFILE" ]; then
+    if readcmsfile $CMSDASD $CMSCONFFILE; then
+        ln -s /run/initramfs/$CMSCONFFILE /tmp/$CMSCONFFILE
+        ln -s /run/initramfs/$CMSCONFFILE /tmp/cms.conf
+        processcmsfile
+    fi
+fi

modules.d/80cms/module-setup.sh

@@ -0,0 +1,38 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+    arch=$(uname -m)
+    [ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
+    return 255
+}
+
+depends() {
+    arch=$(uname -m)
+    [ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
+    echo znet zfcp dasd dasd_mod
+    return 0
+}
+
+installkernel() {
+    instmods zfcp
+}
+
+install() {
+    inst_hook pre-trigger 30 "$moddir/cmssetup.sh"
+    inst_hook pre-pivot 95 "$moddir/cms-write-ifcfg.sh"
+    inst "$moddir/cmsifup.sh" /sbin/cmsifup
+    inst /etc/cmsfs-fuse/filetypes.conf
+    inst /etc/udev/rules.d/99-fuse.rules
+    inst /etc/fuse.conf
+
+    for file in $(rpm -ql s390utils-base); do
+	[[ -f $file ]] && inst $file
+    done
+
+    inst_libdir_file "gconv/*"
+#inst /usr/lib/locale/locale-archive
+
+    dracut_install cmsfs-fuse fusermount ulockmgr_server bash tr insmod rmmod cat normalize_dasd_arg
+}

modules.d/90btrfs/80-btrfs.rules

@@ -1,8 +1,11 @@
 SUBSYSTEM!="block", GOTO="btrfs_end"
 ACTION!="add|change", GOTO="btrfs_end"
+ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end"
+RUN+="/sbin/modprobe btrfs"
+RUN+="/sbin/btrfs device scan $env{DEVNAME}"
 
-ENV{ID_FS_TYPE}=="btrfs", RUN+="/sbin/modprobe btrfs"
-ENV{ID_FS_TYPE}=="btrfs", RUN+="/sbin/btrfs device scan $env{DEVNAME}"
+RUN+="/sbin/initqueue --finished --unique --name btrfs_finished /sbin/btrfs_finished"
+RUN+="/sbin/initqueue --timeout --onetime --unique --name btrfs_timeout /sbin/btrfs_timeout"
 
 LABEL="btrfs_end"