skipcpio: fixed signatured check

Otherwise the compiler emits a warning and the return vale is
in theory undefined.

.gitignore

@@ -1,3 +1,4 @@
+/Makefile.inc
 /dracut.8
 /dracut-catimages.8
 /dracut.conf.5
@@ -11,3 +12,8 @@ test*.img
 /.buildpath
 /.project
 /dracut-version.sh
+/install/dracut-install
+/*.rpm
+/*.[0-9]
+/modules.d/98systemd/*.service.8
+/*.sign

.mailmap

@@ -1,12 +1,15 @@
-Philippe Seewer <philippe.seewer@bfh.ch> <philippe.seewer-omB+W0Dpw2o@public.gmane.org>
-Seewer Philippe <philippe.seewer@bfh.ch> <philippe.seewer@bfh.ch>
-Philippe Seewer <philippe.seewer@bfh.ch> <philippe.seewer@bfh.ch>
-Victor Lowther <victor.lowther@gmail.com> <victor.lowther-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
-Harald Hoyer <harald@redhat.com> <harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
-Harald Hoyer <harald@redhat.com> <harald@eeepc.(none)>
-Mike Snitzer <snitzer@redhat.com> <msnitzer@redhat.com> 
-Amerigo Wang <amwang@redhat.com> <xiyou.wangcong@gmail.com>
-Andrey Borzenkov <arvidjaar@gmail.com> <arvidjaar@mail.ru>
-Dan Horák <dhorak@redhat.com> <dan@danny.cz>
-John Reiser <jreiser@bitwagon.com> <jreiser@BitWagon.com>
-Luca Berra <bluca@vodka.it> <bluca@comedia.it>
+Philippe Seewer <philippe.seewer@bfh.ch> 	<philippe.seewer-omB+W0Dpw2o@public.gmane.org>
+Seewer Philippe <philippe.seewer@bfh.ch> 	<philippe.seewer@bfh.ch>
+Philippe Seewer <philippe.seewer@bfh.ch> 	<philippe.seewer@bfh.ch>
+Victor Lowther <victor.lowther@gmail.com> 	<victor.lowther-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+Harald Hoyer <harald@redhat.com> 		<harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
+Harald Hoyer <harald@redhat.com> 		<harald@eeepc.(none)>
+Mike Snitzer <snitzer@redhat.com> 		<msnitzer@redhat.com>
+Amerigo Wang <amwang@redhat.com> 		<xiyou.wangcong@gmail.com>
+Andrey Borzenkov <arvidjaar@gmail.com> 		<arvidjaar@mail.ru>
+Dan Horák <dhorak@redhat.com> 			<dan@danny.cz>
+John Reiser <jreiser@bitwagon.com> 		<jreiser@BitWagon.com>
+Luca Berra <bluca@vodka.it> 			<bluca@comedia.it>
+Dave Young <dyoung@redhat.com>	 		dyoung@redhat.com
+Frederick Grose <fgrose@sugarlabs.org> 		<fgrose@gmail.com>
+Frederic Crozat <fcrozat@suse.com> 		<fcrozat@mandriva.com>

50-dracut.install

@@ -0,0 +1,33 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+if [[ -f /etc/kernel/cmdline ]]; then
+    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+fi
+
+if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
+    readarray -t BOOT_OPTIONS < /proc/cmdline
+fi
+
+unset noimageifnotneeded
+
+for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
+    if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
+        noimageifnotneeded="yes"
+        break
+    fi
+done
+
+ret=0
+case "$1" in
+    add)
+	dracut ${noimageifnotneeded:+--noimageifnotneeded} "$3"/initrd "$2"
+        ret=$?
+	;;
+    remove)
+        rm -f -- "$3"/initrd
+        ret=$?
+	;;
+esac
+exit $ret

51-dracut-rescue-postinst.sh

@@ -0,0 +1,70 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+export LANG=C
+
+KERNEL_VERSION="$1"
+KERNEL_IMAGE="$2"
+
+[[ -f /etc/os-release ]] && . /etc/os-release
+
+if [[ ! -f /etc/machine-id ]] || [[ ! -s /etc/machine-id ]]; then
+    systemd-machine-id-setup
+fi
+
+[[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
+
+[[ $MACHINE_ID ]] || exit 1
+[[ -f $KERNEL_IMAGE ]] || exit 1
+
+INITRDFILE="/boot/initramfs-0-rescue-${MACHINE_ID}.img"
+NEW_KERNEL_IMAGE="${KERNEL_IMAGE%/*}/vmlinuz-0-rescue-${MACHINE_ID}"
+
+[[ -f $INITRDFILE ]] && [[ -f $NEW_KERNEL_IMAGE ]] && exit 0
+
+dropindirs_sort()
+{
+    suffix=$1; shift
+    args=("$@")
+    files=$(
+        while (( $# > 0 )); do
+            for i in ${1}/*${suffix}; do
+                [[ -f $i ]] && echo ${i##*/}
+            done
+            shift
+        done | sort -Vu
+    )
+
+    for f in $files; do
+        for d in "${args[@]}"; do
+            if [[ -f "$d/$f" ]]; then
+                echo "$d/$f"
+                continue 2
+            fi
+        done
+    done
+}
+
+# source our config dir
+for f in $(dropindirs_sort ".conf" "/etc/dracut.conf.d" "/usr/lib/dracut/dracut.conf.d"); do
+    [[ -e $f ]] && . "$f"
+done
+
+[[ $dracut_rescue_image != "yes" ]] && exit 0
+
+if [[ ! -f $INITRDFILE ]]; then
+    dracut --no-hostonly -a "rescue" "$INITRDFILE" "$KERNEL_VERSION"
+    ((ret+=$?))
+fi
+
+if [[ ! -f $NEW_KERNEL_IMAGE ]]; then
+    cp "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
+    ((ret+=$?))
+fi
+
+new-kernel-pkg --install "$KERNEL_VERSION" --kernel-image "$NEW_KERNEL_IMAGE" --initrdfile "$INITRDFILE" --banner "$NAME $VERSION_ID Rescue $MACHINE_ID"
+
+((ret+=$?))
+
+exit $ret

51-dracut-rescue.install

@@ -0,0 +1,103 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+export LANG=C
+
+COMMAND="$1"
+KERNEL_VERSION="$2"
+BOOT_DIR_ABS="${3%/*}/0-rescue"
+KERNEL_IMAGE="$4"
+
+
+dropindirs_sort()
+{
+    suffix=$1; shift
+    args=("$@")
+    files=$(
+        while (( $# > 0 )); do
+            for i in ${1}/*${suffix}; do
+                [[ -f $i ]] && echo ${i##*/}
+            done
+            shift
+        done | sort -Vu
+    )
+
+    for f in $files; do
+        for d in "${args[@]}"; do
+            if [[ -f "$d/$f" ]]; then
+                echo "$d/$f"
+                continue 2
+            fi
+        done
+    done
+}
+
+[[ -f /etc/os-release ]] && . /etc/os-release
+
+if [[ ! -f /etc/machine-id ]] || [[ ! -s /etc/machine-id ]]; then
+    systemd-machine-id-setup
+fi
+
+[[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
+
+if [[ -f /etc/kernel/cmdline ]]; then
+    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+fi
+if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
+    readarray -t BOOT_OPTIONS < /proc/cmdline
+fi
+if ! [[ $BOOT_OPTIONS ]]; then
+    exit 1
+fi
+
+LOADER_ENTRY="/boot/loader/entries/${MACHINE_ID}-0-rescue.conf"
+BOOT_DIR="/${MACHINE_ID}/0-rescue"
+
+ret=0
+
+case "$COMMAND" in
+    add)
+        for i in "/boot/loader/entries/${MACHINE_ID}-0-rescue.conf"; do
+            [[ -f $i ]] && exit 0
+        done
+
+        # source our config dir
+        for f in $(dropindirs_sort ".conf" "/etc/dracut.conf.d" "/usr/lib/dracut/dracut.conf.d"); do
+            [[ -e $f ]] && . "$f"
+        done
+
+        [[ $dracut_rescue_image != "yes" ]] && exit 0
+
+        [[ -d "$BOOT_DIR_ABS" ]] || mkdir -p "$BOOT_DIR_ABS"
+
+        if ! cp "$KERNEL_IMAGE" "$BOOT_DIR_ABS"/linux; then
+            echo "Can't copy '$KERNEL_IMAGE to '$BOOT_DIR_ABS/linux'!" >&2
+        fi
+
+        dracut --no-hostonly  -a "rescue" "$BOOT_DIR_ABS"/initrd "$2"
+        ((ret+=$?))
+
+        {
+            echo "title      $PRETTY_NAME - Rescue Image"
+            echo "version    $KERNEL_VERSION"
+            echo "machine-id $MACHINE_ID"
+            echo "options    ${BOOT_OPTIONS[@]} rd.auto=1"
+            echo "linux      $BOOT_DIR/linux"
+            echo "initrd     $BOOT_DIR/initrd"
+        } > $LOADER_ENTRY
+        ((ret+=$?))
+        ;;
+
+    remove)
+        exit 0
+        ;;
+
+    *)
+        usage
+        ret=1;;
+esac
+
+((ret+=$?))
+
+exit $ret

AUTHORS

@@ -1,67 +1,105 @@
 Harald Hoyer <harald@redhat.com>
 Victor Lowther <victor.lowther@gmail.com>
+Amadeusz Żołnowski <aidecoe@aidecoe.name>
+Will Woods <wwoods@redhat.com>
 Philippe Seewer <philippe.seewer@bfh.ch>
 Warren Togami <wtogami@redhat.com>
-Amadeusz Żołnowski <aidecoe@aidecoe.name>
 Jeremy Katz <katzj@redhat.com>
-David Dillow <dave@thedillows.org>
-Will Woods <wwoods@redhat.com>
-Michal Soltys <soltys@ziu.info>
 Dave Young <dyoung@redhat.com>
+David Dillow <dave@thedillows.org>
+Michal Soltys <soltys@ziu.info>
 Amerigo Wang <amwang@redhat.com>
-Andrey Borzenkov <arvidjaar@gmail.com>
 Colin Guthrie <colin@mageia.org>
+Andrey Borzenkov <arvidjaar@gmail.com>
+Peter Jones <pjones@redhat.com>
 Andreas Thienemann <andreas@bawue.net>
 Hans de Goede <hdegoede@redhat.com>
-Peter Jones <pjones@redhat.com>
+WANG Chao <chaowang@redhat.com>
 John Reiser <jreiser@bitwagon.com>
 Luca Berra <bluca@vodka.it>
+Thomas Renninger <trenn@suse.de>
 Daniel Drake <dsd@laptop.org>
-Marc Grimme <grimme@atix.de>
 Dan Horák <dhorak@redhat.com>
+Baoquan He <bhe@redhat.com>
+Leho Kraav <leho@kraav.com>
+Brian C. Lane <bcl@redhat.com>
+Kamil Rytarowski <n54@gmx.com>
+Marc Grimme <grimme@atix.de>
+Chao Wang <chaowang@redhat.com>
+Colin Walters <walters@verbum.org>
+Frederic Crozat <fcrozat@suse.com>
+Jesse Keating <jkeating@redhat.com>
+Milan Broz <mbroz@redhat.com>
+Peter Rajnoha <prajnoha@redhat.com>
+Radek Vykydal <rvykydal@redhat.com>
 Roberto Sassu <roberto.sassu@polito.it>
 Anton Blanchard <anton@samba.org>
 Bill Nottingham <notting@redhat.com>
-Brian C. Lane <bcl@redhat.com>
 David Cantrell <dcantrell@redhat.com>
+Dennis Gilmore <dennis@ausil.us>
+Jon Ander Hernandez <jonan.h@gmail.com>
+Juan RP <xtraeme@gmail.com>
 Lance Albertson <lance@osuosl.org>
 Marian Ganisin <mganisin@redhat.com>
 Michael Ploujnikov <plouj@somanetworks.com>
+Wim Muskee <wimmuskee@gmail.com>
 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
 Alan Pevec <apevec@redhat.com>
+Alexander Tsoy <alexander@tsoy.me>
+Frederick Grose <fgrose@sugarlabs.org>
 Ian Dall <ian@beware.dropbear.id.au>
 James Buren <ryuo@frugalware.org>
+James Lee <jlee@thestaticvoid.com>
 Joey Boggs <jboggs@redhat.com>
-Jon Ander Hernandez <jonan.h@gmail.com>
+Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 Mike Snitzer <snitzer@redhat.com>
-Peter Rajnoha <prajnoha@redhat.com>
 Przemysław Rudy <prudy1@o2.pl>
+Stefan Reimer <it@startux.de>
+Thomas Lange <lange@informatik.uni-koeln.de>
+Vivek Goyal <vgoyal@redhat.com>
 Vladislav Bogdanov <bubble@hoster-ok.com>
+Adam Williamson <awilliam@redhat.com>
 Alexander Todorov <atodorov@redhat.com>
 Andy Lutomirski <luto@mit.edu>
 Anssi Hannula <anssi@mageia.org>
+Brandon Philips <brandon@ifup.co>
+Canek Peláez Valdés <caneko@gmail.com>
+Chris Leech <cleech@redhat.com>
 Christian Heinz <christian.ch.heinz@gmail.com>
+Cong Wang <amwang@redhat.com>
+Daniel Schaal <farbing@web.de>
 Dave Jones <davej@redhat.com>
+Dave Young <dave@redhat.com>
+Dennis Schridde <devurandom@gmx.net>
 Duane Griffin <duaneg@dghda.com>
-Frederic Crozat <fcrozat@mandriva.com>
 Glen Gray <slaine@slaine.org>
 Hermann Gausterer <git-dracut-2012@mrq1.org>
 James Laska <jlaska@redhat.com>
 Jan Stodola <jstodola@redhat.com>
-Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-Leho Kraav <leho@kraav.com>
+Jiri Pirko <jiri@resnulli.us>
+Joe Lawrence <Joe.Lawrence@stratus.com>
+Kevin Yung <Kevin.Yung@myob.com>
+Kyle McMartin <kyle@redhat.com>
+Lars R. Damerow <lars@pixar.com>
+Lennert Buytenhek <buytenh@wantstofly.org>
 Lubomir Rintel <lkundrak@v3.sk>
 Matt <smoothsailing72@hotmail.com>
 Matt Smith <shadowfax@gmx.com>
 Michal Schmidt <mschmidt@redhat.com>
+Mike Gorse <mgorse@suse.com>
 Munehiro Matsuda <haro@kgt.co.jp>
+Nicolas Chauvet <kwizart@gmail.com>
+Nikoli <nikoli@lavabit.com>
+Olivier Blin <dev@blino.org>
 Paolo Bonzini <pbonzini@redhat.com>
 Peter Robinson <pbrobinson@fedoraproject.org>
 Pádraig Brady <P@draigBrady.com>
 Quentin Armitage <quentin@armitage.org.uk>
+Robert Buchholz <rbu@goodpoint.de>
 Sergey Fionov <fionov@gmail.com>
+Srinivasa T N <seenutn@linux.vnet.ibm.com>
 Thilo Bangert <thilo.bangert@gmx.net>
-Thomas Lange <lange@informatik.uni-koeln.de>
+Thomas Backlund <tmb@mageia.org>
 Tomasz Torcz <tomek@pipebreaker.pl>
 Vadim Kuznetsov <vadimk@gentoo.org>
 Ville Skyttä <ville.skytta@iki.fi>

COPYING

@@ -1,12 +1,12 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 2, June 1991
 
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                          675 Mass Ave, Cambridge, MA 02139, USA
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
-			    Preamble
+                            Preamble
 
   The licenses for most software are designed to take away your
 freedom to share and change it.  By contrast, the GNU General Public
@@ -15,7 +15,7 @@ software--to make sure the software is free for all its users.  This
 General Public License applies to most of the Free Software
 Foundation's software and to any other program whose authors commit to
 using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
+the GNU Lesser General Public License instead.)  You can apply it to
 your programs, too.
 
   When we speak of free software, we are referring to freedom, not
@@ -55,8 +55,8 @@ patent must be licensed for everyone's free use or not licensed at all.
 
   The precise terms and conditions for copying, distribution and
 modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
+
+                    GNU GENERAL PUBLIC LICENSE
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
   0. This License applies to any program or other work which contains
@@ -110,7 +110,7 @@ above, provided that you also meet all of these conditions:
     License.  (Exception: if the Program itself is interactive but
     does not normally print such an announcement, your work based on
     the Program is not required to print an announcement.)
-
+
 These requirements apply to the modified work as a whole.  If
 identifiable sections of that work are not derived from the Program,
 and can be reasonably considered independent and separate works in
@@ -168,7 +168,7 @@ access to copy from a designated place, then offering equivalent
 access to copy the source code from the same place counts as
 distribution of the source code, even though third parties are not
 compelled to copy the source along with the object code.
-
+
   4. You may not copy, modify, sublicense, or distribute the Program
 except as expressly provided under this License.  Any attempt
 otherwise to copy, modify, sublicense or distribute the Program is
@@ -225,7 +225,7 @@ impose that choice.
 
 This section is intended to make thoroughly clear what is believed to
 be a consequence of the rest of this License.
-
+
   8. If the distribution and/or use of the Program is restricted in
 certain countries either by patents or by copyrighted interfaces, the
 original copyright holder who places the Program under this License
@@ -255,7 +255,7 @@ make exceptions for this.  Our decision will be guided by the two goals
 of preserving the free status of all derivatives of our free software and
 of promoting the sharing and reuse of software generally.
 
-			    NO WARRANTY
+                            NO WARRANTY
 
   11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
 FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
@@ -277,9 +277,9 @@ YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
 PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGES.
 
-		     END OF TERMS AND CONDITIONS
-
-	Appendix: How to Apply These Terms to Your New Programs
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it
@@ -291,7 +291,7 @@ convey the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
     <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
+    Copyright (C) <year>  <name of author>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -303,16 +303,16 @@ the "copyright" line and a pointer to where the full notice is found.
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
 
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
 Also add information on how to contact you by electronic and paper mail.
 
 If the program is interactive, make it output a short notice like this
 when it starts in an interactive mode:
 
-    Gnomovision version 69, Copyright (C) 19yy name of author
+    Gnomovision version 69, Copyright (C) year name of author
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.
@@ -335,5 +335,5 @@ necessary.  Here is a sample; alter the names:
 This General Public License does not permit incorporating your program into
 proprietary programs.  If your program is a subroutine library, you may
 consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
+library.  If this is what you want to do, use the GNU Lesser General
 Public License instead of this License.

Makefile

@@ -1,5 +1,9 @@
-VERSION=022
-GITVERSION=$(shell [ -d .git ] && git rev-list  --abbrev-commit  -n 1 HEAD  |cut -b 1-8)
+-include dracut-version.sh
+
+VERSION = $(shell [ -d .git ] && git describe --abbrev=0 --tags 2>/dev/null || echo $(DRACUT_VERSION))
+GITVERSION = $(shell [ -d .git ] && { v=$$(git describe --tags 2>/dev/null); [ $${v\#*-} != $$v ] && echo -$${v\#*-}; } )
+
+-include Makefile.inc
 
 prefix ?= /usr
 libdir ?= ${prefix}/lib
@@ -8,54 +12,91 @@ pkglibdir ?= ${libdir}/dracut
 sysconfdir ?= ${prefix}/etc
 bindir ?= ${prefix}/bin
 mandir ?= ${prefix}/share/man
+CFLAGS ?= -O2 -g -Wall
+CFLAGS += -std=gnu99  -D_FILE_OFFSET_BITS=64
+bashcompletiondir ?= ${datadir}/bash-completion/completions
 
-manpages = dracut.8 \
-	   dracut.cmdline.7 \
-	   dracut.conf.5 \
-	   dracut-catimages.8 \
-	   lsinitrd.1 \
-	   mkinitrd.8
+man1pages = lsinitrd.1
 
-.PHONY: install clean archive rpm testimage test all check AUTHORS doc
+man5pages = dracut.conf.5
 
-all: syncheck dracut-version.sh dracut-install
+man7pages = dracut.cmdline.7 \
+            dracut.bootup.7 \
+            dracut.modules.7
 
-DRACUT_INSTALL_SOURCE = \
-	install/dracut-install.c \
-	install/hashmap.c\
-	install/log.c \
-	install/util.c
+man8pages = dracut.8 \
+            dracut-catimages.8 \
+            mkinitrd.8 \
+            mkinitrd-suse.8 \
+            modules.d/98systemd/dracut-cmdline.service.8 \
+            modules.d/98systemd/dracut-initqueue.service.8 \
+            modules.d/98systemd/dracut-mount.service.8 \
+            modules.d/98systemd/dracut-shutdown.service.8 \
+            modules.d/98systemd/dracut-pre-mount.service.8 \
+            modules.d/98systemd/dracut-pre-pivot.service.8 \
+            modules.d/98systemd/dracut-pre-trigger.service.8 \
+            modules.d/98systemd/dracut-pre-udev.service.8
 
-DRACUT_INSTALL_HEADER = \
-	install/hashmap.h \
-	install/log.h \
-	install/macro.h \
-	install/util.h
+manpages = $(man1pages) $(man5pages) $(man7pages) $(man8pages)
 
-dracut-install: $(DRACUT_INSTALL_SOURCE) $(DRACUT_INSTALL_HEADER)
-	gcc -std=gnu99 -O2 -g -Wall -o dracut-install $(DRACUT_INSTALL_SOURCE)
+.PHONY: install clean archive rpm testimage test all check AUTHORS doc dracut-version.sh
+
+all: dracut-version.sh dracut-install skipcpio/skipcpio
+
+DRACUT_INSTALL_OBJECTS = \
+        install/dracut-install.o \
+        install/hashmap.o\
+        install/log.o \
+        install/strv.o \
+        install/util.o
+
+# deps generated with gcc -MM
+install/dracut-install.o: install/dracut-install.c install/log.h install/macro.h \
+	install/hashmap.h install/util.h
+install/hashmap.o: install/hashmap.c install/util.h install/macro.h install/log.h \
+	install/hashmap.h
+install/log.o: install/log.c install/log.h install/macro.h install/util.h
+install/util.o: install/util.c install/util.h install/macro.h install/log.h
+install/strv.o: install/strv.c install/strv.h install/util.h install/macro.h install/log.h
+
+install/dracut-install: $(DRACUT_INSTALL_OBJECTS)
+
+dracut-install: install/dracut-install
+	ln -fs $< $@
+
+SKIPCPIO_OBJECTS= \
+	skipcpio/skipcpio.o
+
+skipcpio/skipcpio.o: skipcpio/skipcpio.c
+skipcpio/skipcpio: skipcpio/skipcpio.o
 
 indent:
 	indent -i8 -nut -br -linux -l120 install/dracut-install.c
+	indent -i8 -nut -br -linux -l120 skipcpio/skipcpio.c
 
 doc: $(manpages) dracut.html
 
+ifneq ($(enable_documentation),no)
+all: doc
+endif
+
 %: %.xml
 	xsltproc -o $@ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
 
 %.xml: %.asc
 	asciidoc -d manpage -b docbook -o $@ $<
 
-dracut.html: dracut.asc $(manpages)
+dracut.8: dracut.usage.asc dracut.8.asc
+
+dracut.html: dracut.asc $(manpages) dracut.css dracut.usage.asc
 	asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc
 	xsltproc -o dracut.html --xinclude -nonet \
-		--stringparam draft.mode yes \
-		--stringparam html.stylesheet \
-		http://docs.redhat.com/docs/en-US/Common_Content/css/default.css \
+		--stringparam custom.css.source dracut.css \
+		--stringparam generate.css.header 1 \
 		http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
-	rm dracut.xml
+	rm -f -- dracut.xml
 
-install: doc dracut-version.sh
+install: dracut-version.sh
 	mkdir -p $(DESTDIR)$(pkglibdir)
 	mkdir -p $(DESTDIR)$(bindir)
 	mkdir -p $(DESTDIR)$(sysconfdir)
@@ -67,78 +108,106 @@ install: doc dracut-version.sh
 	install -m 0755 lsinitrd.sh $(DESTDIR)$(bindir)/lsinitrd
 	install -m 0644 dracut.conf $(DESTDIR)$(sysconfdir)/dracut.conf
 	mkdir -p $(DESTDIR)$(sysconfdir)/dracut.conf.d
+	mkdir -p $(DESTDIR)$(pkglibdir)/dracut.conf.d
 	install -m 0755 dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions.sh
 	install -m 0755 dracut-version.sh $(DESTDIR)$(pkglibdir)/dracut-version.sh
-	ln -s dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions
+	ln -fs dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions
 	install -m 0755 dracut-logger.sh $(DESTDIR)$(pkglibdir)/dracut-logger.sh
 	install -m 0755 dracut-initramfs-restore.sh $(DESTDIR)$(pkglibdir)/dracut-initramfs-restore
 	cp -arx modules.d $(DESTDIR)$(pkglibdir)
-	install -m 0644 lsinitrd.1 $(DESTDIR)$(mandir)/man1/lsinitrd.1
-	install -m 0644 mkinitrd.8 $(DESTDIR)$(mandir)/man8/mkinitrd.8
-	install -m 0644 dracut.8 $(DESTDIR)$(mandir)/man8/dracut.8
-	install -m 0644 dracut-catimages.8 \
-                        $(DESTDIR)$(mandir)/man8/dracut-catimages.8
-	install -m 0644 dracut.conf.5 $(DESTDIR)$(mandir)/man5/dracut.conf.5
-	install -m 0644 dracut.cmdline.7 $(DESTDIR)$(mandir)/man7/dracut.cmdline.7
-	ln -s dracut.cmdline.7 $(DESTDIR)$(mandir)/man7/dracut.kernel.7
+ifneq ($(enable_documentation),no)
+	for i in $(man1pages); do install -m 0644 $$i $(DESTDIR)$(mandir)/man1/$${i##*/}; done
+	for i in $(man5pages); do install -m 0644 $$i $(DESTDIR)$(mandir)/man5/$${i##*/}; done
+	for i in $(man7pages); do install -m 0644 $$i $(DESTDIR)$(mandir)/man7/$${i##*/}; done
+	for i in $(man8pages); do install -m 0644 $$i $(DESTDIR)$(mandir)/man8/$${i##*/}; done
+	ln -fs dracut.cmdline.7 $(DESTDIR)$(mandir)/man7/dracut.kernel.7
+endif
 	if [ -n "$(systemdsystemunitdir)" ]; then \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
-		install -m 0644 dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir); \
+		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants; \
 		ln -s ../dracut-shutdown.service \
 		$(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants/dracut-shutdown.service; \
+		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants; \
+		for i in \
+		    dracut-cmdline.service \
+		    dracut-initqueue.service \
+		    dracut-mount.service \
+		    dracut-pre-mount.service \
+		    dracut-pre-pivot.service \
+		    dracut-pre-trigger.service \
+		    dracut-pre-udev.service \
+		    ; do \
+			ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
+			ln -s ../$$i \
+			$(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants/$$i; \
+		done \
 	fi
-	install $(strip) -m 0755 dracut-install $(DESTDIR)$(pkglibdir)/dracut-install
+	if [ -f install/dracut-install ]; then \
+		install -m 0755 install/dracut-install $(DESTDIR)$(pkglibdir)/dracut-install; \
+	fi
+	if [ -f skipcpio/skipcpio ]; then \
+		install -m 0755 skipcpio/skipcpio $(DESTDIR)$(pkglibdir)/skipcpio; \
+	fi
+	mkdir -p $(DESTDIR)${prefix}/lib/kernel/install.d
+	install -m 0755 50-dracut.install $(DESTDIR)${prefix}/lib/kernel/install.d/50-dracut.install
+	install -m 0755 51-dracut-rescue.install $(DESTDIR)${prefix}/lib/kernel/install.d/51-dracut-rescue.install
+	mkdir -p $(DESTDIR)${bashcompletiondir}
+	install -m 0644 dracut-bash-completion.sh $(DESTDIR)${bashcompletiondir}/dracut
+	install -m 0644 lsinitrd-bash-completion.sh $(DESTDIR)${bashcompletiondir}/lsinitrd
 
 dracut-version.sh:
-	@echo "DRACUT_VERSION=$(VERSION)-$(GITVERSION)" > dracut-version.sh
+	@echo "DRACUT_VERSION=$(VERSION)$(GITVERSION)" > dracut-version.sh
 
 clean:
 	$(RM) *~
 	$(RM) */*~
 	$(RM) */*/*~
+	$(RM) $(manpages:%=%.xml) dracut.xml
 	$(RM) test-*.img
-	$(RM) dracut-*.rpm dracut-*.tar.bz2
-	$(RM) dracut-install
+	$(RM) dracut-*.rpm dracut-*.tar.bz2 dracut-*.tar.xz
+	$(RM) dracut-version.sh
+	$(RM) dracut-install install/dracut-install $(DRACUT_INSTALL_OBJECTS)
+	$(RM) skipcpio/skipcpio $(SKIPCPIO_OBJECTS)
 	$(RM) $(manpages) dracut.html
 	$(MAKE) -C test clean
 
-archive: dracut-$(VERSION)-$(GITVERSION).tar.bz2
+dist: dracut-$(VERSION).tar.xz
 
-dist: dracut-$(VERSION).tar.bz2
-
-dracut-$(VERSION).tar.bz2: doc
+dracut-$(VERSION).tar.xz: doc syncheck
+	@echo "DRACUT_VERSION=$(VERSION)" > dracut-version.sh
 	git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ > dracut-$(VERSION).tar
 	mkdir -p dracut-$(VERSION)
-	cp $(manpages) dracut.html dracut-$(VERSION)
-	tar -rf dracut-$(VERSION).tar dracut-$(VERSION)/*.[0-9] dracut-$(VERSION)/dracut.html
-	rm -fr dracut-$(VERSION).tar.bz2 dracut-$(VERSION)
-	bzip2 -9 dracut-$(VERSION).tar
-	rm -f dracut-$(VERSION).tar
+	for i in $(manpages) dracut.html dracut-version.sh; do [ "$${i%/*}" != "$$i" ] && mkdir -p "dracut-$(VERSION)/$${i%/*}"; cp "$$i" "dracut-$(VERSION)/$$i"; done
+	tar --owner=root --group=root -rf dracut-$(VERSION).tar $$(find dracut-$(VERSION) -type f)
+	rm -fr -- dracut-$(VERSION).tar.xz dracut-$(VERSION)
+	xz -9 dracut-$(VERSION).tar
+	rm -f -- dracut-$(VERSION).tar
 
-rpm: dracut-$(VERSION).tar.bz2
+rpm: dracut-$(VERSION).tar.xz syncheck
 	rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
-	cp dracut-$(VERSION).tar.bz2 "$$rpmbuild"; \
+	cp dracut-$(VERSION).tar.xz "$$rpmbuild"; \
 	LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
 	(cd "$$rpmbuild"; rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
 	        --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
 		--define "_rpmdir $$PWD" -ba dracut.spec; ) && \
-	( mv "$$rpmbuild"/$$(arch)/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr "$$rpmbuild"; ls *.rpm )
+	( mv "$$rpmbuild"/$$(arch)/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr -- "$$rpmbuild"; ls *.rpm )
 
 syncheck:
-	@ret=0;for i in dracut-initramfs-restore.sh dracut-logger.sh \
-                        modules.d/99base/init.sh modules.d/*/*.sh; do \
+	@ret=0;for i in dracut-initramfs-restore.sh modules.d/*/*.sh; do \
                 [ "$${i##*/}" = "module-setup.sh" ] && continue; \
                 read line < "$$i"; [ "$${line#*bash*}" != "$$line" ] && continue; \
-		dash -n "$$i" ; ret=$$(($$ret+$$?)); \
+		[ $$V ] && echo "posix syntax check: $$i"; bash --posix -n "$$i" ; ret=$$(($$ret+$$?)); \
+		[ $$V ] && echo "checking for [[: $$i"; if grep -Fq '[[ ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains [["; fi \
 	done;exit $$ret
 	@ret=0;for i in *.sh mkinitrd-dracut.sh modules.d/*/*.sh \
 	                modules.d/*/module-setup.sh; do \
-		bash -n "$$i" ; ret=$$(($$ret+$$?)); \
+		[ $$V ] && echo "bash syntax check: $$i"; bash -n "$$i" ; ret=$$(($$ret+$$?)); \
 	done;exit $$ret
 
-check: all syncheck
-	$(MAKE) -C test check
+check: all syncheck rpm
+	@[ "$$EUID" == "0" ] || { echo "'check' must be run as root! Please use 'sudo'."; exit 1; }
+	@$(MAKE) -C test check
 
 testimage: all
 	./dracut.sh -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
@@ -151,15 +220,15 @@ testimages: all
 	@echo wrote  test-dracut.img
 
 hostimage: all
-	./dracut.sh -H -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	./dracut.sh -H -l -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img
 
 AUTHORS:
 	git shortlog  --numbered --summary -e |while read a rest; do echo $$rest;done > AUTHORS
 
-dracut.html.sign: dracut-$(VERSION).tar.bz2
-	gpg-sign-all dracut-$(VERSION).tar.bz2 dracut.html
+dracut.html.sign: dracut-$(VERSION).tar.xz dracut.html
+	gpg-sign-all dracut-$(VERSION).tar.xz dracut.html
 
 upload: dracut.html.sign
-	kup put dracut-$(VERSION).tar.bz2 dracut-$(VERSION).tar.sign /pub/linux/utils/boot/dracut/
+	kup put dracut-$(VERSION).tar.xz dracut-$(VERSION).tar.sign /pub/linux/utils/boot/dracut/
 	kup put dracut.html dracut.html.sign /pub/linux/utils/boot/dracut/

NEWS

@@ -1,3 +1,323 @@
+dracut-035
+==========
+- changed dracut tarball compression to xz
+- new argument "--rebuild"
+- add lzo, lz4 compression
+- install: install all binaries with <name> found in PATH
+- lsinitrd can now handle initramfs images with an early cpio prepended
+  (microcode, ACPI tables)
+- mkinitrd-suse added as a compat stub for dracut
+- lvm: install thin utils for non-hostonly
+- resume: fix swap detection in hostonly
+- avoid loading unnecessary 32-bit libraries for 64-bit initrds
+- crypt: wait for systemd password agents
+- crypt: skip crypt swaps with password files
+- network: before doing dhcp, dracut now checks, if the link has a carrier
+- network: dhclient-script.sh now sets the lease time
+- network: include usbnet drivers
+- network: include all ethernet drivers
+- network: add rd.bootif=0 to ignore BOOTIF
+- i18n: introduce i18n_install_all, to install everything i18n related
+- support SuSE DASD configurations
+- support SuSE zfcp configurations
+- support SuSE compressed KEYMAP= setting
+- usrmount: always install the module,
+  so always mount /usr from within the initramfs
+- test/TEST-17-LVM-THIN: new test case for lvm thin pools
+- "halt" the machine in systemd mode for die()
+
+dracut-034
+==========
+- do not run dhcp on parts of assembled network interfaces (bond, bridge)
+- add option to turn on/off prelinking
+    --prelink, --noprelink
+    do_prelink=[yes|no]
+- add ACPI table overriding
+- do not log to syslog/kmsg/journal for UID != 0
+- lvm/mdraid: Fix LVM on MD activation
+- bcache module removed (now in bcache-tools upstream)
+- mdadm: also install configs from /etc/mdadm.conf.d
+- fixes for mdadm-3.2.6+
+- mkinitrd: better compat support for SUSE
+- fcoe: add FCoE UEFI boot device support
+- rootfs-block: add support for the rootfallback= kernel cmdline option
+
+Contributions from:
+Thomas Renninger
+Alexander Tsoy
+Peter Rajnoha
+WANG Chao
+Harald Hoyer
+
+
+dracut-033
+==========
+- improved hostonly device recognition
+- improved hostonly module recognition
+- add dracut.css for dracut.html
+- do not install udev rules from /etc in generic mode
+- fixed LABEL= parsing for swap devices
+- fixed iBFT network setup
+- url-lib.sh: handle 0-size files with curl
+- dracut.asc: document debugging dracut on shutdown
+- if rd.md=0, use dmraid for imsm and ddf
+- skip empty dracut modules
+- removed caching of kernel cmdline
+- fixed iso-scan, if the loop device driver is a kernel module
+- bcache: support new blkid
+- fixed ifup udev rules
+- ifup with dhcp, if no "ip=" specified for the interface
+
+Contributions from:
+WANG Chao
+Colin Walters
+Harald Hoyer
+
+
+dracut-032
+==========
+- add parameter --print-cmdline
+    This prints the kernel command line parameters for the current disk
+    layout.
+    $ dracut --print-cmdline
+    rd.luks.uuid=luks-e68c8906-6542-4a26-83c4-91b4dd9f0471
+    rd.lvm.lv=debian/root rd.lvm.lv=debian/usr root=/dev/mapper/debian-root
+    rootflags=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered
+    rootfstype=ext4
+- dracut.sh: add --persistent-policy option and persistent_policy conf option
+    --persistent-policy <policy>:
+        Use <policy> to address disks and partitions.
+        <policy> can be any directory name found in /dev/disk.
+        E.g. "by-uuid", "by-label"
+- dracut now creates the initramfs without udevadm
+  that means the udev database does not have to populated
+  and the initramfs can be built in a chroot with
+  /sys /dev /proc mounted
+- renamed dracut_install() to inst_multiple() for consistent naming
+- if $libdirs is unset, fall back to ld.so.cache paths
+- always assemble /usr device in initramfs
+- bash module added (disable it, if you really want dash)
+- continue to boot, if the main loop times out, in systemd mode
+- removed inst*() shell pure versions, dracut-install binary is in charge now
+- fixed ifcfg file generation for vlan
+- do not include adjtime and localtime anymore
+- fixed generation of zfcp.conf of CMS setups
+- install vt102 terminfo
+  dracut_install() is still there for backwards compat
+- do not strip files in FIPS mode
+- fixed iBFT interface configuration
+- fs-lib: install fsck and fsck.ext*
+- shutdown: fixed killall_proc_mountpoint()
+- network: also wait for ethernet interfaces to setup
+- fixed checking for FIPS mode
+
+Contributions from:
+Harald Hoyer
+WANG Chao
+Baoquan He
+Daniel Schaal
+Dave Young
+James Lee
+Radek Vykydal
+
+
+dracut-031
+==========
+- do not include the resume dracut module in hostonly mode,
+  if no swap is present
+- don't warn twice about omitted modules
+- use systemd-cat for logging on systemd systems, if logfile is unset
+- fixed PARTUUID parsing
+- support kernel module signing keys
+- do not install the usrmount dracut module in hostonly mode,
+  if /sbin/init does not live in /usr
+- add debian udev rule files
+- add support for bcache
+- network: handle bootif style interfaces
+  e.g. ip=77-77-6f-6f-64-73:dhcp
+- add support for kmod static devnodes
+- add vlan support for iBFT
+
+Contributions from:
+Harald Hoyer
+Amadeusz Żołnowski
+Brandon Philips
+Colin Walters
+James Lee
+Kyle McMartin
+Peter Jones
+
+dracut-030
+==========
+- support new persistent network interface names
+- fix findmnt calls, prevents hang on stale NFS mounts
+- add systemd.slice and slice.target units
+- major shell cleanup
+- support root=PARTLABEL= and root=PARTUUID=
+- terminfo: only install l/linux v/vt100 and v/vt220
+- unset all LC_* and LANG, 10% faster
+- fixed dependency loop for dracut-cmdline.service
+- do not wait_for_dev for the root devices
+- do not wait_for_dev for devices, if dracut-initqueue is not needed
+- support early microcode loading with --early-microcode
+- dmraid, let dmraid setup its own partitions
+- sosreport renamed to rdsosreport
+
+Contributions from:
+Harald Hoyer
+Konrad Rzeszutek Wilk
+WANG Chao
+
+dracut-029
+==========
+- wait for IPv6 autoconfiguration
+- i18n: make the default font configurable
+  To set the default font for your distribution, add
+  i18n_default_font="latarcyrheb-sun16"
+  to your /lib/dracut/dracut.conf.d/01-dist.conf distribution config.
+- proper handle "rd.break" in systemd mode before switch-root
+- systemd: make unit files symlinks
+- build without dash requirement
+- add dracut-shutdown.service.8 manpage
+- handle MACs for "ip="
+  "ip=77-77-6f-6f-64-73:dhcp"
+- don't explode when mixing BOOTIF and ip=
+- 90lvm/module-setup.sh: redirect error message of lvs to /dev/null
+
+Contributions from:
+Harald Hoyer
+Will Woods
+Baoquan He
+
+dracut-028
+==========
+- full integration of crypto devs in systemd logic
+- support for bridge over team and vlan tagged team
+- support multiple bonding interfaces
+- new kernel command line param "rd.action_on_fail"
+  to control the emergency action
+- support for bridge over a vlan tagged interface
+- support for "iso-scan/filename" kernel parameter
+- lsinitrd got some love and does not use "file" anymore
+- fixed issue with noexec mounted tmp dirs
+- FIPS mode fixed
+- dracut_install got some love
+- fixed some /usr mounting problems
+- ifcfg dracut module got some love and fixes
+- default installed font is now latarcyrheb-sun16
+- new parameters rd.live.dir and rd.live.squashimg
+- lvm: add tools for thin provisioning
+- also install non-hwcap libs
+- setup correct system time and time zone in initrd
+- s390: fixed cms setup
+- add systemd-udevd persistent network interface naming
+
+Contributions from:
+Harald Hoyer
+Kamil Rytarowski
+WANG Chao
+Baoquan He
+Adam Williamson
+Colin Guthrie
+Dan Horák
+Dave Young
+Dennis Gilmore
+Dennis Schridde
+
+dracut-027
+==========
+- dracut now has bash-completion
+- require bash version 4
+- systemd module now requires systemd >= 199
+- dracut makes use of native systemd initrd units
+- added hooks for new-kernel-pkg and kernel-install
+- hostonly is now default for fedora
+- comply with the BootLoaderSpec paths
+  http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec
+- added rescue module
+- host_fs_types is now a hashmap
+- new dracut argument "--regenerate-all"
+- new dracut argument "--noimageifnotneeded"
+- new man page dracut.bootup
+- install all host filesystem drivers
+- use -D_FILE_OFFSET_BITS=64 to build dracut-install
+
+dracut-026
+==========
+- introduce /usr/lib/dracut/dracut.conf.d/ drop-in directory
+
+  /usr/lib/dracut/dracut.conf.d/*.conf can be overwritten by the same
+  filenames in /etc/dracut.conf.d.
+
+  Packages should use /usr/lib/dracut/dracut.conf.d rather than
+  /etc/dracut.conf.d for drop-in configuration files.
+
+  /etc/dracut.conf and /etc/dracut.conf.d belong to the system administrator.
+
+- uses systemd-198 native initrd units
+- totally rely on the fstab-generator in systemd mode for block devices
+- dracut systemd now uses dracut.target rather than basic.target
+- dracut systemd services optimize themselves away
+- fixed hostonly parameter generation
+- turn off curl globbing (fixes IPv6)
+- modify the udev rules on install and not runtime time
+- enable initramfs building without kernel modules (fixed regression)
+- in the initqueue/timeout,
+  reset the main loop counter, as we see new udev events or initqueue/work
+- fixed udev rule installation
+
+dracut-025
+==========
+- do not strip signed kernel modules
+- add sosreport script and generate /run/initramfs/sosreport.txt
+- make short uuid specification for allow-discards work
+- turn off RateLimit for the systemd journal
+- fixed MAC address assignment
+- add systemd checkisomd5 service
+- splitout drm kernel modules from plymouth module
+- add 'swapoff' to initramfs to fix shutdown/reboot
+- add team device support
+- add pre-shutdown hook
+- kill all processes in shutdown and report remaining ones
+- "--device" changed to "--add-device" and "add_device=" added for conf files
+- add memory usage trace to different hook points
+- cope with optional field #7 in /proc/self/mountinfo
+- lots of small bugfixes
+
+dracut-024
+==========
+- new dracut option "--device"
+- new dracut kernel command line options "rd.auto"
+- new dracut kernel command line options "rd.noverifyssl"
+- new dracut option "--kernel-cmdline" and "kernel_cmdline" option for default parameters
+- fixes for systemd and crypto
+- fix for kexec in shutdown, if not included in initramfs
+- create the initramfs non-world readable
+- prelink/preunlink in the initramfs
+- strip binaries in the initramfs by default now
+- various FIPS fixes
+- various dracut-install fixes
+
+dracut-023
+==========
+- resume from hibernate fixes
+- -N option for --no-hostonly
+- support for systemd crypto handling
+- new dracut module "crypt-loop"
+- deprecate the old kernel command line options
+- more documentation
+- honor CFLAGS for dracut-install build
+- multipath fixes
+- / is mounted according to rootflags parameter but forced ro at first.
+  Later it is remounted according to /etc/fstab + rootflags parameter
+  and "ro"/"rw".
+- support for xfs / reiserfs separate journal device
+- new "ro_mnt" option to force ro mount of / and /usr
+- root on cifs support
+- dracut-install: fixed issue for /var/tmp containing a symlink
+- only lazy resolve with ldd, if the /var/tmp partition is not mounted with "noexec"
+- i18n: fixed inclusion of "include" keymaps
+
 dracut-022
 ==========
 - fixed host-only kernel module bug

README

@@ -1,6 +1,6 @@
-Dracut
+dracut
 ------
-Dracut is a new initramfs infrastructure.
+dracut is a new initramfs infrastructure.
 
 Information about the initial goals and aims can be found at
 https://fedoraproject.org/wiki/Initrdrewrite

README.modules

@@ -1,5 +1,5 @@
 Most of the functionality that dracut implements are actually implemented
-by dracut modules.  Dracut modules live in modules.d, and have the following
+by dracut modules.  dracut modules live in modules.d, and have the following
 structure:
 
 dracut_install_dir/modules.d/
@@ -38,7 +38,7 @@ installkernel():
 
 
 check():
-       Dracut calls this function to check and see if a module can be installed
+       dracut calls this function to check and see if a module can be installed
        on the initrd.
 
        When called without options, check should check to make sure that

README.testsuite

@@ -7,5 +7,24 @@ cryptsetup
 nfs-utils
 netbsd-iscsi
 nbd
-dhcp
+dhcp (dhcp-server on openSUSE)
 iscsi-initiator-utils
+TEST-04-FULL-SYSTEMD: systemd >= 187
+
+How to run the testsuite:
+
+$ sudo make clean check
+
+in verbose mode:
+$ sudo make V=1 clean check
+
+only specific test:
+$ sudo make TESTS="01 20 40" clean check
+only runs the 01, 20 and 40 tests.
+
+debug a specific test case:
+$ cd TEST-01-BASIC
+$ sudo make clean setup run
+... change some kernel parameters ...
+$ sudo make run
+to run the test without doing the setup

TODO

@@ -6,23 +6,37 @@ Items are ordered in priority.
 
 INITRAMFS TODO
 
+- allow dual stack configuration (IPv4, IPv6) for the same interface
+- "bind-mount" kernel drivers in real root for the rescue image,
+  if the real root does not have any kernel modules for this kernel
+  https://bugzilla.redhat.com/show_bug.cgi?id=1046510
+- use info and warn prefix
 - generate systemd unit dracut-initramfs-restore in /run/systemd dynamically
 - put "root=" parsing hooks in separate hook dir
 - call "root=" parsing hooks after getting new rootpath from dhcp
 - put mount hook in main initqueue loop / careful about resume!
 - the hard-coded list of udev rules that we care about is kind of lame.
 - panic fallback
+- bridging/bonding without "netroot=" https://bugzilla.redhat.com/show_bug.cgi?id=822750
+- progress indication for fsck https://bugzilla.redhat.com/show_bug.cgi?id=827118
+- domain, searchdomain https://bugzilla.redhat.com/show_bug.cgi?id=840778
+- disable write-ifcfg https://bugzilla.redhat.com/show_bug.cgi?id=840784
+- check for /var to be mounted in convertfs https://bugzilla.redhat.com/show_bug.cgi?id=848172
+- probably fix "--include" https://bugzilla.redhat.com/show_bug.cgi?id=849338
 
 GENERATOR TODO
 
+- report errors on missing files in check()
+- remove wait for swap devs, if no "resume=" is given on the kernel command line
+- add presets (predefined set of modules)
 - add interpreter/plugin-scripts to be sourced at the beginning or end (can use dracut-functions)
-- provide "installkernel" and "new-kernel-pkg"
 - add mechanism for module specific command line options
 - pkg-config integration, to make it easy for other packages to use us.
-- add recovery image creator (mkrecovery)
 - default module specification could use some work
 - udev rule copying, as mentioned above, is a bit too hard-coded
 
+- dracut-install parse LD_SHOW_AUXV="" AT_PLATFORM for lib install
+
 CODE TODO
 
 - document more functions
@@ -31,5 +45,5 @@ CODE TODO
 Future Enhancement Requests
 
 - run ssh server to enter crypto password or perform debugging (supported by debian)
-- https://bugzilla.redhat.com/show_bug.cgi?id=524727 - Dracut + encrypted root + networking
+- https://bugzilla.redhat.com/show_bug.cgi?id=524727 - dracut + encrypted root + networking
 

configure

@@ -0,0 +1,78 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+# We don't support srcdir != builddir
+echo \#buildapi-variable-no-builddir >/dev/null
+
+prefix=/usr
+
+enable_documentation=yes
+
+# Little helper function for reading args from the commandline.
+# it automatically handles -a b and -a=b variants, and returns 1 if
+# we need to shift $3.
+read_arg() {
+    # $1 = arg name
+    # $2 = arg value
+    # $3 = arg parameter
+    local rematch='^[^=]*=(.*)$'
+    if [[ $2 =~ $rematch ]]; then
+        read "$1" <<< "${BASH_REMATCH[1]}"
+    else
+        read "$1" <<< "$3"
+        # There is no way to shift our callers args, so
+        # return 1 to indicate they should do it instead.
+        return 1
+    fi
+    return 0
+}
+
+while (($# > 0)); do
+    case "${1%%=*}" in
+        --prefix) read_arg prefix "$@" || shift;;
+        --libdir) read_arg libdir "$@" || shift;;
+        --datadir) read_arg datadir "$@" || shift;;
+        --sysconfdir) read_arg sysconfdir "$@" || shift;;
+        --sbindir) read_arg sbindir "$@" || shift;;
+        --mandir) read_arg mandir "$@" || shift;;
+        --disable-documentation) enable_documentation=no;;
+        --program-prefix) read_arg programprefix "$@" || shift;;
+        --exec-prefix) read_arg execprefix "$@" || shift;;
+        --bindir) read_arg bindir "$@" || shift;;
+        --includedir) read_arg includedir "$@" || shift;;
+        --libexecdir) read_arg libexecdir "$@" || shift;;
+        --localstatedir) read_arg localstatedir "$@" || shift;;
+        --sharedstatedir) read_arg sharedstatedir "$@" || shift;;
+        --infodir) read_arg infodir "$@" || shift;;
+        --systemdsystemunitdir) read_arg systemdsystemunitdir "$@" || shift;;
+        --bashcompletiondir) read_arg bashcompletiondir "$@" || shift;;
+        *) echo "Ignoring unknown option '$1'";;
+    esac
+    shift
+done
+
+cat > Makefile.inc.$$ <<EOF
+prefix ?= ${prefix}
+libdir ?= ${libdir:-${prefix}/lib}
+datadir ?= ${datadir:-${prefix}/share}
+sysconfdir ?= ${sysconfdir:-${prefix}/etc}
+sbindir ?= ${sbindir:-${prefix}/sbin}
+mandir ?= ${mandir:-${prefix}/share/man}
+enable_documentation ?= ${enable_documentation:-yes}
+bindir ?= ${bindir:-${prefix}/bin}
+EOF
+
+{
+    [[ $programprefix ]] && echo "programprefix ?= ${programprefix}"
+    [[ $execprefix ]] && echo "execprefix ?= ${execprefix}"
+    [[ $includedir ]] && echo "includedir ?= ${includedir}"
+    [[ $libexecdir ]] && echo "libexecdir ?= ${libexecdir}"
+    [[ $localstatedir ]] && echo "localstatedir ?= ${localstatedir}"
+    [[ $sharedstatedir ]] && echo "sharedstatedir ?= ${sharedstatedir}"
+    [[ $infodir ]] && echo "infodir ?= ${infodir}"
+    [[ $systemdsystemunitdir ]] && echo "systemdsystemunitdir ?= ${systemdsystemunitdir}"
+    [[ $bashcompletiondir ]] && echo "bashcompletiondir ?= ${bashcompletiondir}"
+} >> Makefile.inc.$$
+
+mv Makefile.inc.$$ Makefile.inc

dracut-bash-completion.sh

@@ -0,0 +1,79 @@
+#
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Copyright 2013 Red Hat, Inc.  All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+__contains_word () {
+        local word=$1; shift
+        for w in $*; do [[ $w = $word ]] && return 0; done
+        return 1
+}
+
+_dracut() {
+        local field_vals= cur=${COMP_WORDS[COMP_CWORD]} prev=${COMP_WORDS[COMP_CWORD-1]}
+        local -A OPTS=(
+                [STANDALONE]='-f -v -q -l -H -h -M -N
+                              --ro-mnt --force --kernel-only --no-kernel --strip --nostrip
+                              --hardlink --nohardlink --noprefix --mdadmconf --nomdadmconf
+                              --lvmconf --nolvmconf --debug --profile --verbose --quiet
+                              --local --hostonly --no-hostonly --fstab --help --bzip2 --lzma
+                              --xz --no-compress --gzip --list-modules --show-modules --keep
+                              --printsize --regenerate-all --noimageifnotneeded --early-microcode
+                              --no-early-microcode --print-cmdline --prelink --noprelink'
+
+                       [ARG]='-a -m -o -d -I -k -c -L --kver --add --force-add --add-drivers
+                              --omit-drivers --modules --omit --drivers --filesystems --install
+                              --fwdir --libdirs --fscks --add-fstab --mount --device --nofscks
+                              --kmoddir --conf --confdir --tmpdir --stdlog --compress --prefix
+                              --kernel-cmdline --sshkey --persistent-policy'
+        )
+
+        if __contains_word "$prev" ${OPTS[ARG]}; then
+                case $prev in
+                        --kmoddir|-k|--fwdir|--confdir|--tmpdir)
+                                comps=$(compgen -d -- "$cur")
+                                compopt -o filenames
+                        ;;
+                        -c|--conf|--sshkey|--add-fstab|--add-device|-I|--install)
+                                comps=$(compgen -f -- "$cur")
+                                compopt -o filenames
+                        ;;
+                        -a|-m|-o|--add|--modules|--omit)
+                                comps=$(dracut --list-modules 2>/dev/null)
+                        ;;
+                        --persistent-policy)
+                                comps=$(cd /dev/disk/; echo *)
+                        ;;
+                        --kver)
+                                comps=$(cd /lib/modules; echo [0-9]*)
+                        ;;
+                        *)
+                                return 0
+                        ;;
+                esac
+                COMPREPLY=( $(compgen -W '$comps' -- "$cur") )
+                return 0
+        fi
+
+        if [[ $cur = -* ]]; then
+                COMPREPLY=( $(compgen -W '${OPTS[*]}' -- "$cur") )
+                return 0
+        fi
+}
+
+complete -F _dracut dracut

dracut-catimages.sh

@@ -118,11 +118,11 @@ fi
 images+=($@)
 
 dinfo "Using base image $baseimage"
-cat "$baseimage" > "$outfile"
+cat -- "$baseimage" > "$outfile"
 
 for i in "${images[@]}"; do
     dinfo "Appending $i"
-    cat "$i" >> "$outfile"
+    cat -- "$i" >> "$outfile"
 done
 
 dinfo "Created $outfile"

dracut-initramfs-restore.sh

@@ -1,18 +1,31 @@
-#!/bin/sh
+#!/bin/bash
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 set -e
+
+KERNEL_VERSION="$(uname -r)"
+
+[[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
+
+if [[ $MACHINE_ID ]] && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
+    IMG="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
+fi
+[[ -f $IMG ]] || IMG="/boot/initramfs-${KERNEL_VERSION}.img"
+
 cd /run/initramfs
-IMG="/boot/initramfs-$(uname -r).img"
+
 [ -f .need_shutdown -a -f "$IMG" ] || exit 1
-if zcat "$IMG"  | cpio -id >/dev/null 2>&1; then
-    rm .need_shutdown
-elif xzcat "$IMG"  | cpio -id >/dev/null 2>&1; then
-    rm .need_shutdown
+if zcat "$IMG"  | cpio -id --quiet >/dev/null; then
+    rm -f -- .need_shutdown
+elif xzcat "$IMG"  | cpio -id --quiet >/dev/null; then
+    rm -f -- .need_shutdown
+elif lz4 -d -c "$IMG"  | cpio -id --quiet >/dev/null; then
+    rm -f -- .need_shutdown
 else
     # something failed, so we clean up
-    rm -f /run/initramfs/shutdown
+    echo "Unpacking of $IMG to /run/initramfs failed" >&2
+    rm -f -- /run/initramfs/shutdown
     exit 1
 fi
 

dracut-logger.sh

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 et filetype=sh
 #
@@ -23,7 +23,7 @@
 __DRACUT_LOGGER__=1
 
 
-## @brief Logging facility module for Dracut both at build- and boot-time.
+## @brief Logging facility module for dracut both at build- and boot-time.
 #
 # @section intro Introduction
 #
@@ -89,7 +89,7 @@ __DRACUT_LOGGER__=1
 # @see dlog_init()
 
 
-## @brief Initializes Dracut Logger.
+## @brief Initializes dracut Logger.
 #
 # @retval 1 if something has gone wrong
 # @retval 0 on success.
@@ -116,39 +116,56 @@ dlog_init() {
 
     if [ -z "$fileloglvl" ]; then
         [ -w "$logfile" ] && fileloglvl=4 || fileloglvl=0
-    elif (( $fileloglvl >= 0 )); then
-        __oldumask=$(umask)
-        umask 0377
-        ! [ -e "$logfile" ] && >"$logfile"
-        umask $__oldumask
-        if [ -w "$logfile" -a -f "$logfile" ]; then
+    elif (( $fileloglvl > 0 )); then
+        if [[ $logfile ]]; then
+            __oldumask=$(umask)
+            umask 0377
+            ! [ -e "$logfile" ] && >"$logfile"
+            umask $__oldumask
+            if [ -w "$logfile" -a -f "$logfile" ]; then
             # Mark new run in the log file
-            echo >>"$logfile"
-            if command -v date >/dev/null; then
-                echo "=== $(date) ===" >>"$logfile"
+                echo >>"$logfile"
+                if command -v date >/dev/null; then
+                    echo "=== $(date) ===" >>"$logfile"
+                else
+                    echo "===============================================" >>"$logfile"
+                fi
+                echo >>"$logfile"
             else
-                echo "===============================================" >>"$logfile"
-            fi
-            echo >>"$logfile"
-        else
             # We cannot log to file, so turn this facility off.
-            fileloglvl=0
-            ret=1
-            errmsg="'$logfile' is not a writable file"
+                fileloglvl=0
+                ret=1
+                errmsg="'$logfile' is not a writable file"
+            fi
         fi
     fi
 
-    if (( $sysloglvl >= 0 )); then
-        if ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null
-        then
+    if (( $UID  != 0 )); then
+        kmsgloglvl=0
+        sysloglvl=0
+    fi
+
+    if (( $sysloglvl > 0 )); then
+        if [[ -d /run/systemd/journal ]] \
+            && type -P systemd-cat &>/dev/null \
+            && systemctl --quiet is-active systemd-journald.socket &>/dev/null \
+            && { echo "dracut-$DRACUT_VERSION" | systemd-cat -t 'dracut' &>/dev/null; } ; then
+            readonly _dlogdir="$(mktemp --tmpdir="$TMPDIR/" -d -t dracut-log.XXXXXX)"
+            readonly _systemdcatfile="$_dlogdir/systemd-cat"
+            mkfifo "$_systemdcatfile"
+            readonly _dlogfd=15
+            systemd-cat -t 'dracut' --level-prefix=true <"$_systemdcatfile" &
+            exec 15>"$_systemdcatfile"
+        elif ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null; then
             # We cannot log to syslog, so turn this facility off.
+            kmsgloglvl=$sysloglvl
             sysloglvl=0
             ret=1
             errmsg="No '/dev/log' or 'logger' included for syslog logging"
         fi
     fi
 
-    if (($sysloglvl >= 0)) || (($kmsgloglvl >= 0 )); then
+    if (($sysloglvl > 0)) || (($kmsgloglvl > 0 )); then
         if [ -n "$dracutbasedir" ]; then
             readonly syslogfacility=user
         else
@@ -165,34 +182,34 @@ dlog_init() {
     export maxloglvl
 
 
-    if (($stdloglvl < 6)) && (($kmsgloglvl < 6)) && (($fileloglvl < 6)); then
+    if (($stdloglvl < 6)) && (($kmsgloglvl < 6)) && (($fileloglvl < 6)) && (($sysloglvl < 6)); then
         unset dtrace
         dtrace() { :; };
     fi
 
-    if (($stdloglvl < 5)) && (($kmsgloglvl < 5)) && (($fileloglvl < 5)); then
+    if (($stdloglvl < 5)) && (($kmsgloglvl < 5)) && (($fileloglvl < 5)) && (($sysloglvl < 5)); then
         unset ddebug
         ddebug() { :; };
     fi
 
-    if (($stdloglvl < 4)) && (($kmsgloglvl < 4)) && (($fileloglvl < 4)); then
+    if (($stdloglvl < 4)) && (($kmsgloglvl < 4)) && (($fileloglvl < 4)) && (($sysloglvl < 4)); then
         unset dinfo
         dinfo() { :; };
     fi
 
-    if (($stdloglvl < 3)) && (($kmsgloglvl < 3)) && (($fileloglvl < 3)); then
+    if (($stdloglvl < 3)) && (($kmsgloglvl < 3)) && (($fileloglvl < 3)) && (($sysloglvl < 3)); then
         unset dwarn
         dwarn() { :; };
         unset dwarning
         dwarning() { :; };
     fi
 
-    if (($stdloglvl < 2)) && (($kmsgloglvl < 2)) && (($fileloglvl < 2)); then
+    if (($stdloglvl < 2)) && (($kmsgloglvl < 2)) && (($fileloglvl < 2)) && (($sysloglvl < 2)); then
         unset derror
         derror() { :; };
     fi
 
-    if (($stdloglvl < 1)) && (($kmsgloglvl < 1)) && (($fileloglvl < 1)); then
+    if (($stdloglvl < 1)) && (($kmsgloglvl < 1)) && (($fileloglvl < 1)) && (($sysloglvl < 1)); then
         unset dfatal
         dfatal() { :; };
     fi
@@ -306,15 +323,23 @@ _dlvl2syslvl() {
 _do_dlog() {
     local lvl="$1"; shift
     local lvlc=$(_lvl2char "$lvl") || return 0
-    local msg="$lvlc: $*"
+    local msg="$*"
+    local lmsg="$lvlc: $*"
 
     (( $lvl <= $stdloglvl )) && echo "$msg" >&2
+
     if (( $lvl <= $sysloglvl )); then
-        logger -t "dracut[$$]" -p $(_lvl2syspri $lvl) "$msg"
+        if [[ "$_dlogfd" ]]; then
+            printf -- "<%s>%s\n" "$(($(_dlvl2syslvl $lvl) & 7))" "$msg" >&$_dlogfd
+        else
+            logger -t "dracut[$$]" -p $(_lvl2syspri $lvl) -- "$msg"
+        fi
     fi
+
     if (( $lvl <= $fileloglvl )) && [[ -w "$logfile" ]] && [[ -f "$logfile" ]]; then
-        echo "$msg" >>"$logfile"
+        echo "$lmsg" >>"$logfile"
     fi
+
     (( $lvl <= $kmsgloglvl )) && \
         echo "<$(_dlvl2syslvl $lvl)>dracut[$$] $msg" >/dev/kmsg
 }

dracut.8.asc

@@ -10,10 +10,16 @@ dracut - low-level tool for generating an initramfs image
 
 SYNOPSIS
 --------
-*dracut* ['OPTION...'] [<image> [_<kernel version>_]]
+*dracut* [__OPTION...__] [__<image>__ [__<kernel version>__]]
 
 DESCRIPTION
 -----------
+
+Create an initramfs <image> for the kernel with the version <kernel version>.
+If <kernel version> is omitted, then the version of the actual running
+kernel is used. If <image> is omitted or empty, then the default location
+/boot/initramfs-<kernel version>.img is used.
+
 dracut creates an initial image used by the kernel for preloading the block
 device modules (such as IDE, SCSI or RAID) which are needed to access the root
 filesystem, mounting the root filesystem and booting into the real system.
@@ -22,7 +28,19 @@ At boot time, the kernel unpacks that archive into RAM disk, mounts and uses it
 as initial root file system. All finding of the root device happens in this
 early userspace.
 
-For a complete list of kernel command line options see *dracut.cmdline*(7)
+For a complete list of kernel command line options see *dracut.cmdline*(7).
+
+If you are dropped to an emergency shell, while booting your initramfs,
+the file _/run/initramfs/rdsosreport.txt_ is created, which can be safed to a
+(to be mounted by hand) partition (usually /boot) or a USB stick.
+Additional debugging info can be produced by adding **rd.debug** to the kernel
+command line. _/run/initramfs/rdsosreport.txt_ contains all logs and the output
+of some tools. It should be attached to any report about dracut problems.
+
+USAGE
+-----
+
+include::dracut.usage.asc[]
 
 OPTIONS
 -------
@@ -154,12 +172,25 @@ example:
     specify additional directories, where to look for firmwares. This parameter
     can be specified multiple times.
 
+**--kernel-cmdline <parameters>**::
+    specify default kernel command line parameters
+
+
 **--kernel-only**::
     only install kernel drivers and firmware files
 
 **--no-kernel**::
     do not install kernel drivers and firmware files
 
+**--early-microcode**::
+    Combine early microcode with ramdisk
+
+**--no-early-microcode**::
+    Do not combine early microcode with ramdisk
+
+**--print-cmdline**::
+    print the kernel command line for the current disk layout
+
 **--mdadmconf**::
     include local _/etc/mdadm.conf_
 
@@ -190,10 +221,16 @@ example:
     inhibit installation of any fsck tools
 
 **--strip**::
-    strip binaries in the initramfs
+    strip binaries in the initramfs (default)
 
 **--nostrip**::
-    do not strip binaries in the initramfs (default)
+    do not strip binaries in the initramfs
+
+**--prelink**::
+    prelink binaries in the initramfs (default)
+
+**--noprelink**::
+    do not prelink binaries in the initramfs
 
 **--hardlink**::
     hardlink files in the initramfs (default)
@@ -238,6 +275,12 @@ Default:
 
 **--sshkey** _<sshkey file>_:: ssh key file used with ssh-client module.
 
+**--logfile** _<logfile>_:: logfile to use; overrides any setting from
+    the configuration files.
++
+Default:
+    _/var/log/dracut.log_
+
 **-l, --local**::
     activates the local mode. dracut will use modules from the current working
     directory instead of the system-wide installed modules in
@@ -254,26 +297,37 @@ If chrooted to another root other than the real root device, use "--fstab" and
 provide a valid _/etc/fstab_.
 ====
 
-**--no-hostonly**::
+**-N, --no-hostonly**::
     Disable Host-Only mode
 
+**--persistent-policy** _<policy>_::
+    Use _<policy>_ to address disks and partitions.
+    _<policy>_ can be any directory name found in /dev/disk.
+    E.g. "by-uuid", "by-label"
+
 **--fstab**::
     Use _/etc/fstab_ instead of _/proc/self/mountinfo_.
 
-**--add-fstab** _<filename>_ ::
+**--add-fstab** _<filename>_::
     Add entries of _<filename>_ to the initramfs /etc/fstab.
 
 **--mount** "_<device>_ _<mountpoint>_ _<filesystem type>_ _<filesystem options>_"::
     Mount _<device>_ on _<mountpoint>_ with _<filesystem type>_ and _<filesystem
     options>_ in the initramfs
 
-**-i, --include** _<SOURCE>_ _<TARGET>_::
+**--add-device** _<device>_ ::
+    Bring up _<device>_ in initramfs, _<device>_ should be the device name.
+    This can be useful in hostonly mode for resume support when your swap is on
+    LVM or an encrypted partition.
+    [NB --device can be used for compatibility with earlier releases]
+
+**-i, --include** _<SOURCE>_ _<TARGET>_::
     include the files in the SOURCE directory into the
     TARGET directory in the final initramfs. If SOURCE is a file, it will be
     installed to TARGET in the final initramfs. This parameter can be specified
     multiple times.
 
-**-I, --install** _<file list>_::
+**-I, --install** _<file list>_::
     install the space separated list of files into the initramfs.
 +
 [NOTE]
@@ -305,7 +359,7 @@ will not be able to boot. Equivalent to "--compress=bzip2"
 [WARNING]
 ====
 Make sure your kernel has lzma decompression support compiled in, otherwise you
-will not be able to boot. Equivalent to "--compress=lzma -9"
+will not be able to boot. Equivalent to "lzma --compress=lzma -9"
 ====
 
 **--xz**::
@@ -314,8 +368,24 @@ will not be able to boot. Equivalent to "--compress=lzma -9"
 [WARNING]
 ====
 Make sure your kernel has xz decompression support compiled in, otherwise you
-will not be able to boot. Equivalent to "--compress=xz --check=crc32
---lzma2=dict=1MiB"
+will not be able to boot. Equivalent to
+"lzma --compress=xz --check=crc32 --lzma2=dict=1MiB"
+====
+
+**--lzo**::
+    Compress the generated initramfs using lzop.
+[WARNING]
+====
+Make sure your kernel has lzo decompression support compiled in, otherwise you
+will not be able to boot.
+====
+
+**--lz4**::
+    Compress the generated initramfs using lz4.
+[WARNING]
+====
+Make sure your kernel has lz4 decompression support compiled in, otherwise you
+will not be able to boot.
 ====
 
 **--compress** _<compressor>_::
@@ -338,6 +408,31 @@ will not be able to boot. Equivalent to "--compress=xz --check=crc32
 **--keep**::
     Keep the initramfs temporary directory for debugging purposes.
 
+**--printsize**::
+    Print out the module install size
+
+**--profile**:
+    Output profile information of the build process
+
+**--ro-mnt**:
+    Mount / and /usr read-only by default.
+
+**-L, --stdlog** _<level>_::
+    [0-6] Specify logging level (to standard error)
+----
+          0 - suppress any messages
+          1 - only fatal errors
+          2 - all errors
+          3 - warnings
+          4 - info
+          5 - debug info (here starts lots of output)
+          6 - trace info (and even more)
+----
+
+**--regenerate-all**::
+    Regenerate all initramfs images at the default location with the kernel
+    versions found on the system. Additional parameters are passed through.
+
 FILES
 -----
 _/var/log/dracut.log_::
@@ -353,6 +448,9 @@ _/etc/dracut.conf_::
 _/etc/dracut.conf.d/*.conf_::
     see dracut.conf5
 
+_/usr/lib/dracut/dracut.conf.d/*.conf_::
+    see dracut.conf5
+
 Configuration in the initramfs
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 _/etc/conf.d/_::
@@ -361,6 +459,10 @@ _/etc/conf.d/_::
     set in the configuration files.
 
 _/etc/cmdline_::
+    Can contain additional command line options. Deprecated, better use
+    /etc/cmdline.d/*.conf.
+
+_/etc/cmdline.d/*.conf_::
     Can contain additional command line options.
 
 AVAILABILITY

dracut.asc

@@ -1,7 +1,7 @@
 dracut
 ======
 Harald Hoyer <harald@redhat.com>
-v2.0, March 2011
+v3.0, October 2013
 
 :language: bash
 
@@ -79,7 +79,7 @@ udev pulls in modules matching the computer's detected hardware.
 initialized and a user-space helper started to paint animations onto the display
 in lockstep with the boot process.
 
-* If the root file system is on NFS, dracut does  then:
+* If the root file system is on NFS, dracut does then:
 ** Bring up the primary network interface.
 ** Invoke a DHCP client, with which it can obtain a DHCP lease.
 ** Extract the name of the NFS share and the address of the NFS server from the
@@ -120,902 +120,39 @@ final cleanup tasks. On an initramfs, the initial root file system cannot be
 rotated away. Instead, it is simply emptied and the final root file system
 mounted over the top.
 
+If the systemd module is used in the initramfs, the ordering of the services
+started looks like <<dracutbootup7>>.
+
+== Dracut on shutdown
+
+On a systemd driven system, the dracut initramfs is also used for the shutdown
+procedure.
+
+The following steps are executed during a shutdown:
+
+* systemd switches to the shutdown.target
+* systemd starts
+  /lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
+* dracut-shutdown.service executes /usr/lib/dracut/dracut-initramfs-restore
+  which unpacks the initramfs to /run/initramfs
+* systemd finishes shutdown.target
+* systemd kills all processes
+* systemd tries to unmount everything and mounts the remaining read-only
+* systemd checks, if there is a /run/initramfs/shutdown executable
+* if yes, it does a pivot_root to /run/initramfs and executes ./shutdown.
+  The old root is then mounted on /oldroot.
+  /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable.
+* shutdown will try to umount every /oldroot mount and calls the various
+  shutdown hooks from the dracut modules
+
+This ensures, that all devices are disassembled and unmounted cleanly.
+
 = User Manual
 
-== Creating an initramfs Image
-To create a initramfs image, the most simple command is:
-----
-# dracut
-----
-
-This will generate a general purpose initramfs image, with all possible
-functionality resulting of the combination of the installed dracut modules and
-system tools. The image is /boot/initramfs-_++<kernel version>++_.img and
-contains the kernel modules of the currently active kernel with version
-_++<kernel version>++_.
-
-If the initramfs image already exists, dracut will display an error message, and
-to overwrite the existing image, you have to use the --force option.
-----
-# dracut --force
-----
-
-If you want to specify another filename for the resulting image you would issue
-a command like:
-----
-# dracut foobar.img
-----
-
-To generate an image for a specific kernel version, the command would be:
-----
-# dracut foobar.img 2.6.40-1.rc5.f20
-----
-
-A shortcut to generate the image at the default location for a specific kernel
-version is:
-----
-# dracut --kver 2.6.40-1.rc5.f20
-----
-
-If you want to create lighter, smaller initramfs images, you may want to specify
-the --host-only or -H option. Using this option, the resulting image will
-contain only those dracut modules, kernel modules and filesystems, which are
-needed to boot this specific machine. This has the drawback, that you can't put
-the disk on another controller or machine, and that you can't switch to another
-root filesystem, without recreating the initramfs image. The usage of the
---host-only option is only for experts and you will have to keep the broken
-pieces. At least keep a copy of a general purpose image (and corresponding
-kernel) as a fallback to rescue your system.
-
-=== Inspecting the Contents
-To see the contents of the image created by dracut, you can use the lsinitrd tool.
-----
-# lsinitrd /boot/initramfs-$(uname -r).img | less
-----
-
-To display the contents of a file in the initramfs also use the lsinitrd tool:
-----
-# lsinitrd /boot/initramfs-$(uname -r).img  /etc/ld.so.conf
-include ld.so.conf.d/*.conf
-----
-
-=== Adding dracut Modules
-Some dracut modules are turned off by default and have to be activated manually.
-You can do this by adding the dracut modules to the configuration file
-_/etc/dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_. See <<dracutconf5>>.
-You can also add dracut modules on the command line
-by using the -a or --add option:
-----
-# dracut --add bootchart initramfs-bootchart.img
-----
-
-To see a list of available dracut modules, use the --list-modules option:
-----
-# dracut --list-modules
-----
-
-or, if you have a dracut version earlier than +008+, issue the command:
-----
-# for mod in /usr/lib/dracut/modules.d/*; do echo ${mod##*/??}; done
-----
-
-=== Omitting dracut Modules
-Sometimes you don't want a dracut module to be included for reasons of speed,
-size or functionality. To do this, either specify the omit_dracutmodules
-variable in the _dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_ configuration
-file (see <<dracutconf5>>), or use the -o or --omit option
-on the command line:
-----
-# dracut -o "multipath lvm" no-multipath-lvm.img
-----
-
-=== Adding Kernel Modules
-If you need a special kernel module in the initramfs, which is not
-automatically picked up by dracut, you have the use the --add-drivers option
-on the command line or  the drivers vaiable in  the _/etc/dracut.conf_
-or _/etc/dracut.conf.d/myconf.conf_ configuration file (see <<dracutconf5>>):
-----
-# dracut --add-drivers mymod initramfs-with-mymod.img
-----
-
-== Boot parameters
-The generated initramfs.img file normally does not contain any system
-configuration files (except for some special exceptions), so the configuration
-has to be done on the kernel command line. With this flexibility, you can easily
-boot from a changed root partition, without the need to recompile the initramfs
-image. So, you could completly change your root partition (move it inside a md
-raid with encryption and LVM on top), as long as you specify the correct
-filesystem LABEL or UUID on the kernel command line for your root device, dracut
-will find it and boot from it.
-
-The kernel command line usually can be configured in _/boot/grub/grub.conf_, if
-grub is your bootloader and it also can be edited in the real boot process in
-the grub menu.
-
-The kernel command line can also be provided by the dhcp server with the
-root-path option. See <<NetworkBoot>>.
-
-For a full reference of all kernel command line parameters, see <<dracut8>>.
-
-=== Specifying the root Device
-This is the only option dracut really needs to boot from your root partition.
-Because your root partition can live in various environments, there are a lot of
-formats for the root= option. The most basic one is root=_++<path to device
-node>++_:
-----
-root=/dev/sda2
-----
-
-Because device node names can change, dependent on the drive ordering, you are
-encouraged to use the filesystem identifier (UUID) or filesystem label (LABEL)
-to specify your root partition:
-----
-root=UUID=19e9dda3-5a38-484d-a9b0-fa6b067d0331
-----
-
-or
-
-----
-root=LABEL=myrootpartitionlabel
-----
-
-To see all UUIDs or LABELs on your system, do:
-----
-# ls -l /dev/disk/by-uuid
-----
-
-or
-
-----
-# ls -l /dev/disk/by-label
-----
-
-If your root partition is on the network see <<NetworkBoot>>.
-
-=== Keyboard Settings
-If you have to input passwords for encrypted disk volumes, you might want to set
-the keyboard layout and specify a display font.
-
-A typical german kernel command would contain:
-----
-vconsole.font=latarcyrheb-sun16 vconsole.keymap=de-latin1-nodeadkeys locale.LANG=de_DE.UTF-8
-----
-
-Setting these options can override the setting stored on your system, if you use
-a modern init system, like systemd.
-
-For dracut versions prior to version +008+ the line would look like:
-----
-LANG=de_DE.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=de-latin1-nodeadkeys
-----
-
-=== Blacklisting Kernel Modules
-Sometimes it is required to prevent the automatic kernel module loading of a
-specific kernel module. To do this, just add rd.blacklist=_++<kernel module
-name>++_, with _++<kernel module name>++_ not containing the _.ko_
-suffix, to the kernel command line. For example:
-----
-rd.driver.blacklist=mptsas rd.driver.blacklist=nouveau
-----
-
-The option can be specified multiple times on the kernel command line.
-
-=== Speeding up the Boot Process
-If you want to speed up the boot process, you can specify as much information
-for dracut on the kernel command as possible. For example, you can tell dracut,
-that you root partition is not on a LVM volume or not on a raid partition, or
-that it lives inside a specific crypto LUKS encrypted volume. By default, dracut
-searches everywhere. A typical dracut kernel command line for a plain primary or
-logical partition would contain:
-----
-rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0
-----
-
-On systems with dracut version prior to +008+ the line would look like:
-----
-rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM
-----
-
-This turns off every automatic assembly of LVM, MD raids, DM raids and crypto LUKS.
-
-Of course, you could also omit the dracut modules in the initramfs creation
-process, but then you would lose the posibility to turn it on on demand.
-
-
-[[Injecting]]
-=== Injecting custom Files
-To add your own files to the initramfs image, you have several possibilities.
-
-The --include option let you specify a source path and a target path. For example
-----
-# dracut --include cmdline-preset /etc/cmdline initramfs-cmdline-pre.img
-----
-will create an initramfs image, where the file cmdline-preset will be copied
-inside the initramfs to _/etc/cmdline_. --include can only be specified once.
-
-
-----
-# mkdir rd.live.overlay
-# mkdir rd.live.overlay/etc
-# mkdir rd.live.overlay/etc/conf.d
-# echo "ip=auto" >> rd.live.overlay/etc/cmdline
-# echo export TESTVAR=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
-# echo export TESTVAR=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
-# tree rd.live.overlay/
-rd.live.overlay/
-└── etc
-    ├── cmdline
-    └── conf.d
-        └── testvar.conf
-# dracut --include rd.live.overlay / initramfs-rd.live.overlay.img
-----
-
-This will put the contents of the rd.live.overlay directory into the root of the
-initramfs image.
-
-The --install option let you specify several files, which will get installed in
-the initramfs image at the same location, as they are present on initramfs
-creation time.
-
-
-----
-# dracut --install 'strace fsck.ext3 ssh' initramfs-dbg.img
-----
-
-This will create an initramfs with the strace, fsck.ext3 and ssh executables,
-together with the libraries needed to start those. The --install option can be
-specified multiple times.
-
-
-[[NetworkBoot]]
-== Network Boot
-
-If your root partition is on a network drive, you have to have the network
-dracut modules installed to create a network aware initramfs image.
-
-On a Red Hat Enterprise Linux or Fedora system, this means, you have to install
-the _dracut-network_ rpm package:
-
-
-----
-# yum install dracut-network
-----
-
-The resulting initramfs image can be served by a boot manager residing on your
-local hard drive or it can be served by a PXE/TFTP server.
-
-How to setup your PXE/TFTP server can be found in the
-http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
-Hat Enterprise Linux Storage Administration Guide].
-
-If you specify rd.ip=auto on the kernel command line, then dracut asks a dhcp
-server about the ip adress for the machine. The dhcp server can also serve an
-additional root-path, which will set the root device for dracut. With this
-mechanism, you have static configuration on your client machine and a
-centralized boot configuration on your TFTP/DHCP server. If you can't pass a
-kernel command line, then you can inject _/etc/cmdline_, with a method described
-in <<Injecting>>.
-
-
-
-
-=== Reducing the Image Size
-
-To reduce the size of the initramfs, you should create it with by ommitting all
-dracut modules, which you know, you don't need to boot the machine.
-
-You can also specify the exact dracut and kernel modules to produce a very tiny
-initramfs image.
-
-For example for a NFS image, you would do:
-
-
-----
-# dracut -m "nfs network  base" initramfs-nfs-only.img
-----
-
-Then you would boot from this image with your target machine and reduce the size
-once more by creating it on the target machine with the --host-only option:
-
-
-----
-# dracut -m "nfs network base" --host-only initramfs-nfs-host-only.img
-----
-
-This will reduce the size of the initramfs image significantly.
-
-
-
-=== NFS Root Device
-
-FIXME
-
-=== iSCSI Root Device
-
-FIXME 
-
-=== FCoE Root Device
-
-FIXME
-
-== Troubleshooting
-
-If the boot process does not succeed, you have several options to debug the
-situation. Some of the basic operations are covered here. For more information
-you should also visit:
-http://fedoraproject.org/wiki/How_to_debug_Dracut_problems
-
-
-[[identifying-your-problem-area]]
-=== Identifying your problem area
-. Remove ''rhgb'' and ''quiet'' from the kernel command line
-. Add ''rd.shell'' to the kernel command line. This will present a shell should
-dracut be unable to locate your root device
-. Add ''rd.shell rd.debug log_buf_len=1M'' to the kernel command line so that
-dracut shell commands are printed as they are executed
-. With dracut >= 002-11, you can inspect the rd.debug output with:
-+
-----
-# less /run/initramfs/init.log
-# dmesg | less
-----
-
-[[information-to-include-in-your-report]]
-=== Information to include in your report
-
-[[all-bug-reports]]
-==== All bug reports
-In all cases, the following should be mentioned and attached to your bug report:
-
-* The exact kernel command-line used. Typically from the bootloader
-configuration file (e.g. _/etc/grub.conf_) or from _/proc/cmdline_.
-* A copy of your disk partition information from _/etc/fstab_, which might be
-obtained booting an old working initramfs or a rescue medium.
-* A device listing from device-mapper. This can be obtained by running the
-command 
-+
-----
-# dmsetup ls --tree
-----
-+
-* A list of block device attributes. This can be obtained by running the commands: 
-+
-----
-# blkid -p
-# blkid -p -o udev
-----
-* Turn on dracut debugging (see _the 'debugging dracut' section_), and attach
-all relevant information from the boot log. This can be obtained by running the
-command 
-+
-----
-# dmesg|grep dracut
-----
-+
-* If you use a dracut configuration file, please include _/etc/dracut.conf_ and
-all files in _/etc/dracut.conf.d/*.conf_
-
-[[logical-volume-management-related-problems]]
-==== Logical Volume Management related problems
-As well as the information from <<all-bug-reports>> include the following
-information:
-
-* Include physical volume information by running the command: 
-+
-----
-# lvm pvdisplay
-----
-+
-* Include volume group information by running the command: 
-+
-----
-# lvm vgdisplay
-----
-+
-* Include logical volume information by running the command: 
-+
-----
-# lvm lvdisplay
-----
-
-[[software-raid-related-problems]]
-==== Software RAID related problems
-As well as the information from <<all-bug-reports>>, include the following
-information:
-
-* If using software RAID disk partitions, please include the output of 
-+
-----
-# cat /proc/mdstat
-----
-
-[[network-root-device-related-problems]]
-==== Network root device related problems
-This section details information to include when experiencing problems on a
-system whose root device is located on a network attached volume (e.g. iSCSI,
-NFS or NBD). As well as the information from <<all-bug-reports>>, include the
-following information:
-
-
-* Please include the output of
-+
-----
-# /sbin/ifup <interfacename>
-# ip addr show
-----
-
-[[debugging-dracut]]
-=== Debugging dracut
-
-
-[[configure-a-serial-console]]
-==== Configure a serial console
-
-Successfully debugging dracut will require some form of console
-logging during the system boot.  This section documents configuring a
-serial console connection to record boot messages.
-
-. First, enable serial console output for both the kernel and the bootloader.
-. Open the file _/etc/grub.conf_ for editing. Below the line ''timeout=5'', add
-the following:
-+
-----
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-----
-+
-. Also in _/etc/grub.conf_, add the following boot arguemnts to the ''kernel''
-line:
-+
-----
-console=tty0 console=ttyS0,9600
-----
-+
-. When finished, the _/etc/grub.conf_ file should look similar to the example
-below.
-+
-----
-default=0
-timeout=5
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-title Fedora (2.6.29.5-191.fc11.x86_64)
-  root (hd0,0)
-  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 console=ttyS0,9600
-  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
-----
-+
-. More detailed information on how to configure the kernel for console output
-can be found at
-http://www.faqs.org/docs/Linux-HOWTO/Remote-Serial-Console-HOWTO.html#CONFIGURE-KERNEL.
-. Redirecting non-interactive output
-+
---
-NOTE: You can redirect all non-interactive output to _/dev/kmsg_ and the kernel
-will put it out on the console when it reaches the kernel buffer by doing
-
-----
-# exec >/dev/kmsg 2>&1 </dev/console
-----
---
-
-[[using-the-dracut-shell]]
-==== Using the dracut shell
-
-Dracut offers a shell for interactive debugging in the event dracut fails to
-locate your root filesystem. To enable the shell:
-
-. Add the boot parameter ''rd.shell'' to your bootloader configuration file
-(e.g. _/etc/grub.conf_)
-. Remove the boot arguments ''rhgb'' and ''quiet''
-+
-A sample _/etc/grub.conf_ bootloader configuration file is listed below.
-+
-----
-default=0
-timeout=5
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-title Fedora (2.6.29.5-191.fc11.x86_64)
-  root (hd0,0)
-  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 rd.shell
-  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
-----
-+
-. If system boot fails, you will be dropped into a shell as seen in the example below.
-+
-----
-No root device found
-Dropping to debug shell.
-
-# 
-----
-+
-. Use this shell prompt to gather the information requested above (see <<all-bug-reports>>).
-
-[[accessing-the-root-volume-from-the-dracut-shell]]
-==== Accessing the root volume from the dracut shell
-From the dracut debug shell, you can manually perform the task of locating and
-preparing your root volume for boot. The required steps will depend on how your
-root volume is configured. Common scenarios include:
-
-* A block device (e.g. _/dev/sda7_)
-* A LVM logical volume (e.g. _/dev/VolGroup00/LogVol00_)
-* An encrypted device (e.g. _/dev/mapper/luks-4d5972ea-901c-4584-bd75-1da802417d83_)
-* A network attached device (e.g. netroot=iscsi:@192.168.0.4::3260::iqn.2009-02.org.fedoraproject:for.all)
-
-The exact method for locating and preparing will vary. However, to continue with
-a successful boot, the objective is to locate your root volume and create a
-symlink _/dev/root_ which points to the file system. For example, the following
-example demonstrates accessing and booting a root volume that is an encrypted
-LVM Logical volume. 
-
-. Inspect your partitions using parted
-+
-----
-# parted /dev/sda -s p
-Model: ATA HTS541060G9AT00 (scsi)
-Disk /dev/sda: 60.0GB
-Sector size (logical/physical): 512B/512B
-Partition Table: msdos
-Number  Start   End     Size    Type      File system  Flags
-1      32.3kB  10.8GB  107MB   primary   ext4         boot
-2      10.8GB  55.6GB  44.7GB  logical                lvm
-----
-+
-. You recall that your root volume was a LVM logical volume. Scan and activate
-any logical volumes. 
-+
-----
-# lvm vgscan
-# lvm vgchange -ay
-----
-+
-. You should see any logical volumes now using the command blkid:
-+
-----
-# blkid
-/dev/sda1: UUID="3de247f3-5de4-4a44-afc5-1fe179750cf7" TYPE="ext4"
-/dev/sda2: UUID="Ek4dQw-cOtq-5MJu-OGRF-xz5k-O2l8-wdDj0I" TYPE="LVM2_member"
-/dev/mapper/linux-root: UUID="def0269e-424b-4752-acf3-1077bf96ad2c" TYPE="crypto_LUKS"
-/dev/mapper/linux-home: UUID="c69127c1-f153-4ea2-b58e-4cbfa9257c5e" TYPE="ext3"
-/dev/mapper/linux-swap: UUID="47b4d329-975c-4c08-b218-f9c9bf3635f1" TYPE="swap"
-----
-+
-. From the output above, you recall that your root volume exists on an encrypted
-block device. Following the guidance disk encryption guidance from the
-Installation Guide, you unlock your encrypted root volume.
-+
-----
-# UUID=$(cryptsetup luksUUID /dev/mapper/linux-root)
-# cryptsetup luksOpen /dev/mapper/linux-root luks-$UUID
-Enter passphrase for /dev/mapper/linux-root:
-Key slot 0 unlocked. 
-----
-+
-. Next, make a symbolic link to the unlocked root volume
-+
-----
-# ln -s /dev/mapper/luks-$UUID /dev/root
-----
-+
-. With the root volume available, you may continue booting the system by exiting
-the dracut shell
-+
-----
-# exit
-----
-
-[[additional-dracut-boot-parameters]]
-==== Additional dracut boot parameters
-For more debugging options, see <<dracutkerneldebug>> in <<dracutcmdline7>>.
-
-= Developer Manual
-
-== dracut Components
-
-dracut uses a modular system to build and extend the initramfs image. All
-modules are located in _/usr/lib/dracut/modules.d_ or in _<git-src>/modules.d_.
-The most basic dracut module is _99base_. In _99base_ the initial shell script
-init is defined, which gets run by the kernel after initramfs loading. Although
-you can replace init with your own version of _99base_, this is not encouraged.
-Instead you should use, if possible, the hooks of dracut. All hooks, and the
-point of time in which they are executed, are described in <<stages>>.
-
-The main script, which creates the initramfs is dracut itsself. It parses all
-arguments and sets up the directory, in which everything is installed. It then
-executes all check, install, installkernel scripts found in the modules, which
-are to be processed. After everything is installed, the install directory is
-archived and compressed to the final initramfs image. All helper functions used
-by check, install and installkernel are found in in the file _dracut-functions_.
-These shell functions are available to all module installer (install,
-installkernel) scripts, without the need to source _dracut-functions_.
-
-A module can check the preconditions for install and installkernel with the
-check script. Also dependencies can be expressed with check. If a module passed
-check, install and installkernel will be called to install all of the necessary
-files for the module. To split between kernel and non-kernel parts of the
-installation, all kernel module related parts have to be in installkernel. All
-other files found in a module directory are module specific and mostly are hook
-scripts and udev rules.
-
-
-[[stages]]
-== Boot Process Stages
-
-The init script in _99base_ is the main script, which prepares the root file
-system for usage, runs udev, mounts the real root device, kills the remaining
-processes, and switches to the real root device for further booting. dracut
-modules can insert custom script at various points, to control the boot process.
-These hooks are plain directories containing shell scripts ending with ".sh",
-which are sourced by init.
-Common used functions are in _dracut-lib.sh_, which can be sourced by any script.      
-
-
-
-=== Basic Setup
-
-The first thing init does, is to mount _/proc_ and _/sys_ and manually create
-the basic device nodes and symbolic links in _/dev_ needed to execute basic
-commands. Then logging is setup according to kernel command line arguments.
-_/dev/pts_ and _/dev/shm_ are mounted and the first hook is sourced.
-
-
-
-=== Hook: cmdline
-
-The _cmdline_ hook is a place to insert scripts to parse the kernel command line
-and prepare the later actions, like setting up udev rules and configuration
-files.
-
-In this hook the most important environment variable is defined: root. The
-second one is rootok, which indicates, that a module claimed to be able to parse
-the root defined. So for example, **root=**__iscsi:....__ will be claimed by the
-iscsi dracut module, which then sets rootok.
-
-=== Hook: pre-udev
-
-This hook is executed right after the cmdline hook and a check if root and
-rootok were set. Here modules can take action with the final root, and before
-udev has been run.
-
-
-
-=== Start Udev
-
-Now udev is started and the logging for udev is setup.
-
-
-
-=== Hook: pre-trigger
-
-In this hook, you can set udev environment variables with **udevadm control
---property=KEY=_value_** or control the further execution of udev with
-udevadm.
-
-
-
-=== Trigger Udev
-
-udev is triggered by calling udevadm trigger, which sends add events for all
-devices and subsystems. 
-
-
-
-=== Main Loop
-
-Now the main loop of 99base/init begins. Here we loop until udev has settled and
-all scripts in _initqueue/finished_ returned true. In this loop there are three
-hooks, where scripts can be inserted by calling /sbin/initqueue. 
-
-
-
-==== Initqueue
-
-This hook gets executed every time a script is inserted here, regardless of the
-udev state.
-
-
-
-==== Initqueue settled
-
-This hooks gets executed every time udev has settled.
-
-
-
-==== Initqueue timeout
-
-This hooks gets executed, when the main loop counter becomes half of the
-rd.retry counter.
-
-
-
-==== Initqueue finished
-
-This hook is called after udev has settled and if all scripts herein return 0
-the main loop will be ended.
-
-
-
-=== Hook: pre-mount
-
-Before the root device is mounted all scripts in the hook pre-mount are
-executed. In some cases (e.g. NFS) the real root device is already mounted,
-though.
-
-
-
-=== Hook: mount
-
-This hook is mainly to mount the real root device.
-
-
-
-=== Hook: pre-pivot
-
-This hook is called before cleanup hook, This is a good place for
-actions other than cleanups which need to be called before pivot.
-
-
-=== Hook: cleanup
-
-This hook is the last hook and is called before init finally switches root to
-the real root device. This is a good place to clean up and kill processes not
-needed anymore.
-
-
-=== Cleanup and switch_root
-
-Init kills all udev processes, cleans up the environment, sets up the arguments
-for the real init process and finally calls switch_root. switch_root removes the
-whole filesystem hierarchy of the initramfs, chroot()s to the real root device
-and calls /sbin/init with the specified arguments.
-
-To ensure all files in the initramfs hierarchy can be removed, all processes
-still running from the initramfs should not have any open file descriptors left.
-
-
-
-== Network Infrastructure
-
- 
-FIXME
-
-
-== Writing a Module
-
-A simple example module is _96insmodpost_, which modprobes a kernel module after
-udev has settled and the basic device drivers have been loaded.
-
-All module installation information is in the file module-setup.sh.
-
-First we create a check() function, which just exits with 0 indicating that this
-module should be included by default.
-
-check():
-
-
-----
-return 0
-----
-
-The we create the install() function, which installs a cmdline hook with
-priority number 20 called _parse-insmodpost.sh_. It also installs the
-_insmodpost.sh_ script in _/sbin_.
-
-install():
-
-
-----
-inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
-inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
-----
-
-The _pase-instmodpost.sh_ parses the kernel command line for a argument
-rd.driver.post, blacklists the module from being autoloaded and installs the
-hook _insmodpost.sh_ in the _initqueue/settled_.
-
-_parse-insmodpost.sh_:
-
-
-----
-for p in $(getargs rd.driver.post=); do
-    echo "blacklist $p" >> /etc/modprobe.d/initramfsblacklist.conf
-    _do_insmodpost=1
-done
-
-[ -n "$_do_insmodpost" ] && /sbin/initqueue --settled --unique --onetime /sbin/insmodpost.sh
-unset _do_insmodpost
-
-----
-
-_insmodpost.sh_, which is called in the _initqueue/settled_ hook will just
-modprobe the kernel modules specified in all rd.driver.post kernel command line
-parameters. It runs after udev has settled and is only called once (--onetime).
-
-_insmodpost.sh_:
-
-
-----
-. /lib/dracut-lib.sh
-
-for p in $(getargs rd.driver.post=); do
-    modprobe $p
-done
-
-----
-
-
-
-=== check()
-
-_check()_ is called by dracut to evaluate the inclusion of a dracut module in
-the initramfs.
-
-$hostonly:: If the $hostonly variable is set, then the module check() function
-should be in "hostonly" mode, which means, that the check() should only return
-0, if the module is really needed to boot this specific host.
-
-check() should return with:
-
-0:: Include the dracut module in the initramfs.
-
-1:: Do not include the dracut module. The requirements are not fullfilled
-(missing tools, etc.)
-
-255:: Only include the dracut module, if another module requires it or if
-explicitly specified in the config file or on the argument list.
-
-
-
-=== depends()
-
-The function depends() should echo all other dracut module names the module
-depends on.
-
-
-
-=== install()
-
-dracut_install
-
-inst
-
-inst_hook
-
-inst_rules
-
-
-
-
-
-=== installkernel()
-
-instmods
-
-
-
-=== Creation Functions
-
- 
-FIXME
-
-
-=== Initramfs Functions
-
- 
-FIXME
-
-
-=== Network Modules
-
-FIXME
-
-
 :leveloffset: 1
-[[dracut8]]
 include::dracut.8.asc[]
 
+:leveloffset: 1
 [[dracutconf5]]
 include::dracut.conf.5.asc[]
 
@@ -1028,6 +165,15 @@ include::lsinitrd.1.asc[]
 [[mkinitrd8]]
 include::mkinitrd.8.asc[]
 
+= Developer Manual
+
+:leveloffset: 1
+[[dracutmodules7]]
+include::dracut.modules.7.asc[]
+
+[[dracutbootup7]]
+include::dracut.bootup.7.asc[]
+
 :leveloffset: 0
 [appendix]
 License

dracut.bootup.7.asc

@@ -0,0 +1,123 @@
+DRACUT.BOOTUP(7)
+================
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+dracut.bootup - boot ordering in the initramfs
+
+DESCRIPTION
+-----------
+
+This flow chart illustrates the ordering of the services, if systemd is used in
+the dracut initramfs.
+----
+
+                                    systemd-journal.socket
+                                               |
+                                               v
+                                    dracut-cmdline.service
+                                               |
+                                               v
+                                    dracut-pre-udev.service
+                                               |
+                                               v
+                                     systemd-udevd.service
+                                               |
+                                               v
+local-fs-pre.target                dracut-pre-trigger.service
+         |                                     |
+         v                                     v
+ (various mounts)  (various swap  systemd-udev-trigger.service
+         |           devices...)               |             (various low-level   (various low-level
+         |               |                     |             services: seed,       API VFS mounts:
+         v               v                     v             tmpfiles, random     mqueue, configfs,
+  local-fs.target   swap.target     dracut-initqueue.service    sysctl, ...)        debugfs, ...)
+         |               |                     |                    |                    |
+         \_______________|____________________ | ___________________|____________________/
+                                              \|/
+                                               v
+                                        sysinit.target
+                                               |
+                             _________________/|\___________________
+                            /                  |                    \
+                            |                  |                    |
+                            v                  |                    v
+                        (various               |              rescue.service
+                       sockets...)             |                    |
+                            |                  |                    v
+                            v                  |              rescue.target
+                     sockets.target            |
+                            |                  |
+                            \_________________ |                                 emergency.service
+                                              \|                                         |
+                                               v                                         v
+                                         basic.target                             emergency.target
+                                               |
+                        ______________________/|
+                       /                       |
+                       |                       v
+                       |            dracut-pre-mount.service
+                       |                       |
+                       |                       v
+                       |                  sysroot.mount
+                       |                       |
+                       |                       v
+                       |             initrd-root-fs.target
+           (custom initrd services)            |
+                       |                       v
+                       |             dracut-mount.service
+                       |                       |
+                       |                       v
+                       |            initrd-parse-etc.service
+                       |                       |
+                       |                       v
+                       |            (sysroot-usr.mount and
+                       |             various mounts marked
+                       |               with fstab option
+                       |                x-initrd.mount)
+                       |                       |
+                       |                       v
+                       |                initrd-fs.target
+                       \______________________ |
+                                              \|
+                                               v
+                                          initrd.target
+                                               |
+                                               v
+                                    dracut-pre-pivot.service
+                                               |
+                                               v
+                                     initrd-cleanup.service
+                                          isolates to
+                                    initrd-switch-root.target
+                                               |
+                                               v
+                        ______________________/|
+                       /                       |
+                       |        initrd-udevadm-cleanup-db.service
+                       |                       |
+           (custom initrd services)            |
+                       |                       |
+                       \______________________ |
+                                              \|
+                                               v
+                                   initrd-switch-root.target
+                                               |
+                                               v
+                                   initrd-switch-root.service
+                                               |
+                                               v
+                                          switch-root
+----
+
+
+AUTHOR
+------
+Harald Hoyer
+
+SEE ALSO
+--------
+*dracut*(8) *bootup*(7)

dracut.cmdline.7.asc

@@ -31,16 +31,16 @@ line is the value, which is honored.
 
 Standard
 ~~~~~~~~
-**init=**_<path to real init>_::
+**init=**__<path to real init>__::
     specify the path to the init programm to be started after the initramfs has
     finished
 
-**root=**_<path to blockdevice>_::
+**root=**__<path to blockdevice>__::
     specify the block device to use as the root filesystem.
 +
-E.g.:
-+
-----
+[listing]
+.Example
+--
 root=/dev/sda1
 root=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1
 root=/dev/disk/by-label/Root
@@ -48,61 +48,97 @@ root=LABEL=Root
 root=/dev/disk/by-uuid/3f5ad593-4546-4a94-a374-bcfb68aa11f7
 root=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
 root=PARTUUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
-----
+--
 
-**rootfstype=**_<filesystem type>_:: "auto" if not specified, e.g.:
+**rootfstype=**__<filesystem type>__:: "auto" if not specified.
 +
-----
+[listing]
+.Example
+--
 rootfstype=ext3
-----
+--
 
-**rootflags=**_<mount options>_::
+**rootflags=**__<mount options>__::
     specify additional mount options for the root filesystem. If not set,
     _/etc/fstab_ of the real root will be parsed for special mount options and
     mounted accordingly.
 
+**ro**::
+    force mounting _/_ and _/usr_ (if it is a separate device) read-only.  If
+    none of ro and rw is present, both are mounted according to _/etc/fstab_.
+
+**rw**::
+    force mounting _/_ and _/usr_ (if it is a separate device) read-write.
+    See also ro option.
+
+**rootfallback=**__<path to blockdevice>__::
+    specify the block device to use as the root filesystem, if the normal root
+    cannot be found. This can only be a simple block device with a simple file
+    system, for which the filesystem driver is either compiled in, or added
+    manually to the initramfs. This parameter can be specified multiple times.
+
+**rd.auto** **rd.auto=1**::
+    enable autoassembly of special devices like cryptoLUKS, dmraid, mdraid or
+    lvm. Default is off as of dracut version >= 024.
+
 **rd.fstab=0**::
     do not honor special mount options for the root filesystem found in
     _/etc/fstab_ of the real root.
 
-**resume=**_<path to resume partition>_::
+**resume=**__<path to resume partition>__::
     resume from a swap partition
 +
-E.g.:
-+
-----
+[listing]
+.Example
+--
 resume=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1
 resume=/dev/disk/by-uuid/3f5ad593-4546-4a94-a374-bcfb68aa11f7
 resume=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
-----
+--
 
 **rd.skipfsck**::
     skip fsck for rootfs and _/usr_.  If you're mounting _/usr_ read-only and
     the init system performs fsck before remount, you might want to use this
     option to avoid duplication.
 
-**rd.usrmount.ro**:
-    force mounting _/usr_ read-only.  Use this option if your init system
-    performs remount of _/usr_ the same as it does with rootfs.
-
 
 Misc
 ~~~~
-**rd.driver.blacklist=**_<drivername>[,<drivername>,...]_::
+**rd.driver.blacklist=**__<drivername>__[,__<drivername>__,...]::
     do not load kernel module <drivername>. This parameter can be specified
     multiple times.
 
-**rd.driver.pre=**_<drivername>[,<drivername>,...]_::
+**rd.driver.pre=**__<drivername>__[,__<drivername>__,...]::
     force loading kernel module <drivername>. This parameter can be specified
     multiple times.
 
-**rd.driver.post=**_<drivername>[,<drivername>,...]_::
+**rd.driver.post=**__<drivername>__[,__<drivername>__,...]::
     force loading kernel module <drivername> after all automatic loading modules
     have been loaded. This parameter can be specified multiple times.
 
+**rd.retry=**__<seconds>__::
+    specify how long dracut should wait for devices to appear.
+    The default is 30 seconds. After 2/3 of the time, degraded raids are force
+    started. If you have hardware, which takes a very long time to announce its
+    drives, you might want to extend this value.
+
+**rd.noverifyssl**::
+    accept self-signed certificates for ssl downloads.
+
+**rd.ctty=**__<terminal device>__::
+   specify the controlling terminal for the console.
+   This is useful, if you have multiple "console=" arguments.
+
 [[dracutkerneldebug]]
 Debug
 ~~~~~
+If you are dropped to an emergency shell, the file 
+_/run/initramfs/rdsosreport.txt_ is created, which can be safed to a (to be
+mounted by hand) partition (usually /boot) or a USB stick. Additional debugging
+info can be produced by adding **rd.debug** to the kernel command line.
+_/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools.
+It should be attached to any report about dracut problems.
+
 **rd.info**::
     print informational output though "quiet" is set
 
@@ -110,13 +146,29 @@ Debug
     allow dropping to a shell, if root mounting fails
 
 **rd.debug**::
-    set -x for the dracut shell and logs to dmesg, console and
-    _/run/initramfs/init.log_
+    set -x for the dracut shell.
+    If systemd is active in the initramfs, all output is logged to the systemd
+    journal, which you can inspect with "journalctl -ab".
+    If systemd is not active, the logs are written to dmesg and
+    _/run/initramfs/init.log_.
+    If "quiet" is set, it also logs to the console.
+
+**rd.memdebug=[0-3]**::
+    Print memory usage info at various points, set the verbose level from 0 to 3.
++    
+    Higher level means more debugging output:
++
+----
+    0 - no output
+    1 - partial /proc/meminfo
+    2 - /proc/meminfo
+    3 - /proc/meminfo + /proc/slabinfo
+----
 
 **rd.break**::
     drop to a shell at the end
 
-**rd.break=**_{cmdline|pre-udev|pre-trigger|initqueue|pre-mount|mount|pre-pivot|cleanup}_::
+**rd.break=**__{cmdline|pre-udev|pre-trigger|initqueue|pre-mount|mount|pre-pivot|cleanup}__::
     drop to a shell on defined breakpoint
 
 **rd.udev.info**::
@@ -127,50 +179,56 @@ Debug
 
 I18N
 ~~~~
-**vconsole.keymap=**_<keymap base file name>_::
+**rd.vconsole.keymap=**__<keymap base file name>__::
     keyboard translation table loaded by loadkeys; taken from keymaps directory;
-    will be written as KEYMAP to _/etc/vconsole.conf_ in the initramfs, e.g.:
+    will be written as KEYMAP to _/etc/vconsole.conf_ in the initramfs.
 +
-----
-vconsole.keymap=de-latin1-nodeadkeys
-----
+[listing]
+.Example
+--
+rd.vconsole.keymap=de-latin1-nodeadkeys
+--
 
-**vconsole.keymap.ext=**_<list of keymap base file names>_::
+**rd.vconsole.keymap.ext=**__<list of keymap base file names>__::
     list of extra keymaps to bo loaded (sep. by space); will be written as
     EXT_KEYMAP to _/etc/vconsole.conf_ in the initramfs
 
-**vconsole.unicode**[=_{0|1}_]::
+**rd.vconsole.unicode**::
     boolean, indicating UTF-8 mode; will be written as UNICODE to
     _/etc/vconsole.conf_ in the initramfs
 
-**vconsole.font=**_<font base file name>_::
+**rd.vconsole.font=**__<font base file name>__::
     console font; taken from consolefonts directory; will be written as FONT to
-    _/etc/vconsole.conf_ in the initramfs; e.g.:
+    _/etc/vconsole.conf_ in the initramfs.
 +
-----
-vconsole.font=LatArCyrHeb-16
-----
+[listing]
+.Example
+--
+rd.vconsole.font=LatArCyrHeb-16
+--
 
-**vconsole.font.map=**_<console map base file name>_::
+**rd.vconsole.font.map=**__<console map base file name>__::
     see description of '-m' parameter in setfont manual; taken from consoletrans
     directory; will be written as FONT_MAP to _/etc/vconsole.conf_ in the
     initramfs
 
-**vconsole.font.unimap=**_<unicode table base file name>_::
+**rd.vconsole.font.unimap=**__<unicode table base file name>__::
     see description of '-u' parameter in setfont manual; taken from unimaps
     directory; will be written as FONT_UNIMAP to _/etc/vconsole.conf_ in the
     initramfs
 
-**locale.LANG=**_<locale>_::
+**rd.locale.LANG=**__<locale>__::
     taken from the environment; if no UNICODE is defined we set its value in
     basis of LANG value (whether it ends with ".utf8" (or similar) or not); will
-    be written as LANG to _/etc/locale.conf_ in the initramfs; e.g.:
+    be written as LANG to _/etc/locale.conf_ in the initramfs.
 +
-----
-locale.LANG=pl_PL.utf8
-----
+[listing]
+.Example
+--
+rd.locale.LANG=pl_PL.utf8
+--
 
-**locale.LC_ALL=**_<locale>_::
+**rd.locale.LC_ALL=**__<locale>__::
     taken from the environment; will be written as LC_ALL to _/etc/locale.conf_
     in the initramfs
 
@@ -179,11 +237,11 @@ LVM
 **rd.lvm=0**::
     disable LVM detection
 
-**rd.lvm.vg=**_<volume group name>_::
+**rd.lvm.vg=**__<volume group name>__::
     only activate the volume groups with the given name. rd.lvm.vg can be
     specified multiple times on the kernel command line.
 
-**rd.lvm.lv=**_<logical volume name>_::
+**rd.lvm.lv=**__<logical volume name>__::
     only activate the logical volumes with the given name. rd.lvm.lv can be
     specified multiple times on the kernel command line.
 
@@ -195,21 +253,21 @@ crypto LUKS
 **rd.luks=0**::
     disable crypto LUKS detection
 
-**rd.luks.uuid=**_<luks uuid>_::
+**rd.luks.uuid=**__<luks uuid>__::
     only activate the LUKS partitions with the given UUID. Any "luks-" of the
     LUKS UUID is removed before comparing to _<luks uuid>_.
     The comparisons also matches, if _<luks uuid>_ is only the beginning of the
     LUKS UUID, so you don't have to specify the full UUID.
     This parameter can be specified multiple times.
 
-**rd.luks.allow-discards=**_<luks uuid>_::
-    Allow  using  of discards (TRIM) requests for LUKS partitions with the given UUID.
-    Any "luks-" of the LUKS UUID is removed before comparing to _<luks uuid>_.
-    The comparisons also matches, if _<luks uuid>_ is only the beginning of the
-    LUKS UUID, so you don't have to specify the full UUID.
+**rd.luks.allow-discards=**__<luks uuid>__::
+    Allow  using  of discards (TRIM) requests for LUKS partitions with the given
+    UUID. Any "luks-" of the LUKS UUID is removed before comparing to
+    _<luks uuid>_. The comparisons also matches, if _<luks uuid>_ is only the
+    beginning of the LUKS UUID, so you don't have to specify the full UUID.
     This parameter can be specified multiple times.
 
-**rd.luks.allow-discards::
+**rd.luks.allow-discards**::
     Allow  using  of discards (TRIM) requests on all LUKS partitions.
 
 **rd.luks.crypttab=0**::
@@ -217,18 +275,53 @@ crypto LUKS
 
 crypto LUKS - key on removable device support
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-**rd.luks.key=**_<keypath>:<keydev>:<luksdev>_::
-    _keypath_ is a path to key file to look for. It's REQUIRED. When _keypath_ ends with '.gpg' it's considered to be key encrypted symmetrically with GPG. You will be prompted for password on boot. GPG support comes with 'crypt-gpg' module which needs to be added explicitly.
+**rd.luks.key=**__<keypath>__:__<keydev>__:__<luksdev>__::
+    _keypath_ is a path to key file to look for. It's REQUIRED. When _keypath_
+    ends with '.gpg' it's considered to be key encrypted symmetrically with GPG.
+    You will be prompted for password on boot. GPG support comes with
+    'crypt-gpg' module which needs to be added explicitly.
 +
-_keydev_ is a device on which key file resides. It might be kernel name of devices (should start with "/dev/"), UUID (prefixed with "UUID=") or label (prefix with "LABEL="). You don't have to specify full UUID. Just its beginning will suffice, even if its ambiguous. All matching devices will be probed. This parameter is recommended, but not required. If not present, all block devices will be probed, which may significantly increase boot time.
+_keydev_ is a device on which key file resides. It might be kernel name of
+devices (should start with "/dev/"), UUID (prefixed with "UUID=") or label
+(prefix with "LABEL="). You don't have to specify full UUID. Just its beginning
+will suffice, even if its ambiguous. All matching devices will be probed.
+This parameter is recommended, but not required. If not present, all block
+devices will be probed, which may significantly increase boot time.
 +
-If _luksdev_ is given, the specified key will only be applied for that LUKS device. Possible values are the same as for _keydev_. Unless you have several LUKS devices, you don't have to specify this parameter. The simplest usage is:
+If _luksdev_ is given, the specified key will only be applied for that LUKS
+device. Possible values are the same as for _keydev_. Unless you have several
+LUKS devices, you don't have to specify this parameter. The simplest usage is:
 +
-----
+[listing]
+.Example
+--
 rd.luks.key=/foo/bar.key
-----
+--
 +
 As you see, you can skip colons in such a case.
++
+[NOTE]
+===============================
+dracut pipes key to cryptsetup with _-d -_ argument, therefore you need to pipe
+to crypsetup luksFormat with _-d -_, too!
+
+Here follows example for key encrypted with GPG:
+
+[listing]
+--
+gpg --quiet --decrypt rootkey.gpg | \
+cryptsetup -d - -v --cipher serpent-cbc-essiv:sha256 \
+--key-size 256 luksFormat /dev/sda3
+--
+
+If you use plain keys, just add path to _-d_ option:
+
+[listing]
+--
+cryptsetup -d rootkey.key -v --cipher serpent-cbc-essiv:sha256 \
+ --key-size 256 luksFormat /dev/sda3
+--
+===============================
 
 MD RAID
 ~~~~~~~
@@ -245,9 +338,10 @@ MD RAID
     ignore mdadm.conf included in initramfs
 
 **rd.md.waitclean=1**::
-    wait for any resync, recovery, or reshape activity to finish before continuing
+    wait for any resync, recovery, or reshape activity to finish before
+    continuing
 
-**rd.md.uuid=**_<md raid uuid>_::
+**rd.md.uuid=**__<md raid uuid>__::
     only activate the raid sets with the given UUID. This parameter can be
     specified multiple times.
 
@@ -256,7 +350,7 @@ DM RAID
 **rd.dm=0**::
     disable DM RAID detection
 
-**rd.dm.uuid=**_<dm raid uuid>_::
+**rd.dm.uuid=**__<dm raid uuid>__::
    only activate the raid sets with the given UUID. This parameter can be
    specified multiple times.
 
@@ -265,15 +359,17 @@ FIPS
 **rd.fips**::
     enable FIPS
 
-**boot=**_<boot device>_::
-    specify the device, where /boot is located. e.g.
+**boot=**__<boot device>__::
+    specify the device, where /boot is located.
 +
-----
+[listing]
+.Example
+--
 boot=/dev/sda1
 boot=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1
 boot=UUID=<uuid>
 boot=LABEL=<label>
-----
+--
 
 **rd.fips.skipkernel**::
     skip checksum check of the kernel image. Useful, if the kernel image is not
@@ -281,10 +377,70 @@ boot=LABEL=<label>
 
 Network
 ~~~~~~~
-**ip=**_{dhcp|on|any|dhcp6|auto6|ibft}_::
-    dhcp|on|any::: get ip from dhcp server from all interfaces. If root=dhcp, loop
-    sequentially through all interfaces (eth0, eth1, ...) and use the first with
-    a valid DHCP root-path.
+
+[IMPORTANT]
+=====================
+It is recommended to either bind an interface to a MAC with the **ifname**
+argument, or to use the systemd-udevd predictable network interface names.
+
+Predictable network interface device names based on:
+
+- firmware/bios-provided index numbers for on-board devices
+- firmware-provided pci-express hotplug slot index number
+- physical/geographical location of the hardware
+- the interface's MAC address
+
+See:
+http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
+
+Two character prefixes based on the type of interface:
+
+en:: ethernet
+wl:: wlan
+ww:: wwan
+
+Type of names:
+
+o<index>:: on-board device index number
+s<slot>[f<function>][d<dev_id>]:: hotplug slot index number
+x<MAC>:: MAC address
+[P<domain>]p<bus>s<slot>[f<function>][d<dev_id>]:: PCI geographical location
+[P<domain>]p<bus>s<slot>[f<function>][u<port>][..][c<config>][i<interface>]:: USB port number chain
+
+All multi-function PCI devices will carry the [f<function>] number in the
+device name, including the function 0 device.
+
+When using PCI geography, The PCI domain is only prepended when it is not 0.
+
+For USB devices the full chain of port numbers of hubs is composed. If the
+name gets longer than the maximum number of 15 characters, the name is not
+exported.
+The usual USB configuration == 1 and interface == 0 values are suppressed.
+
+PCI ethernet card with firmware index "1"::
+* eno1
+
+PCI ethernet card in hotplug slot with firmware index number::
+* ens1
+
+PCI ethernet multi-function card with 2 ports::
+* enp2s0f0
+* enp2s0f1
+
+PCI wlan card::
+* wlp3s0
+
+USB built-in 3G modem::
+* wwp0s29u1u4i6
+
+USB Android phone::
+* enp0s29u1u2
+=====================
+
+**ip=**__{dhcp|on|any|dhcp6|auto6|ibft}__::
+    dhcp|on|any::: get ip from dhcp server from all interfaces. If root=dhcp,
+    loop sequentially through all interfaces (eth0, eth1, ...) and use the first
+    with a valid DHCP root-path.
 
     auto6::: IPv6 autoconfiguration
 
@@ -292,7 +448,7 @@ Network
 
     ibft::: iBFT autoconfiguration
 
-**ip=**_<interface>_:_{dhcp|on|any|dhcp6|auto6}_[:[_<mtu>_][:_<macaddr>_]]::
+**ip=**__<interface>__:__{dhcp|on|any|dhcp6|auto6}__[:[__<mtu>__][:__<macaddr>__]]::
     This parameter can be specified multiple times.
 +
 =====================
@@ -303,19 +459,12 @@ cannot be used in conjunction with the **ifname** argument for the
 same <interface>.
 =====================
 
-[IMPORTANT]
-=====================
-It is recommended to either bind <interface> to a MAC with the **ifname**
-argument. Or use biosdevname to name your interfaces, which will then have names according to their hardware location.
-
-em<port>::: for embedded NICs
-p<slot>#<port>_<virtual instance>::: for cards in PCI slots
-=====================
-
-**ip=**_<client-IP>_:_<server-IP>_:_<gateway-IP>_:_<netmask>_:_<client_hostname>_:_<interface>_:_{none|off|dhcp|on|any|dhcp6|auto6|ibft}_[:[_<mtu>_][:_<macaddr>_]]::
+**ip=**__<client-IP>__:[__<peer>__]:__<gateway-IP>__:__<netmask>__:__<client_hostname>__:__<interface>__:__{none|off|dhcp|on|any|dhcp6|auto6|ibft}__:[:[__<mtu>__][:__<macaddr>__]]::
     explicit network configuration. If you want do define a IPv6 address, put it
     in brackets (e.g. [2001:DB8::1]). This parameter can be specified multiple
-    times.
+    times. __<peer>__ is optional and is the address of the remote endpoint
+    for pointopoint interfaces and it may be followed by a slash and a decimal
+    number, encoding the network prefix length.
 +
 =====================
 <macaddr>::: optionally **set** <macaddr> on the <interface>. This
@@ -323,80 +472,110 @@ cannot be used in conjunction with the **ifname** argument for the
 same <interface>.
 =====================
 
-[IMPORTANT]
-=====================
-It is recommended to either bind <interface> to a MAC with the **ifname**
-argument. Or use biosdevname to name your interfaces, which will then have names according to their hardware location.
-
-em<port>::: for embedded NICs
-p<slot>#<port>_<virtual instance>::: for cards in PCI slots
-=====================
-
-**ifname=**_<interface>_:_<MAC>_::
-    Assign network device name <interface> (ie "bootnet") to the NIC with MAC <MAC>.
+**ifname=**__<interface>__:__<MAC>__::
+    Assign network device name <interface> (ie "bootnet") to the NIC with
+    MAC <MAC>.
 +
-[IMPORTANT]
-
-Do **not** use the default kernel naming scheme for the interface name,
+WARNING: Do **not** use the default kernel naming scheme for the interface name,
 as it can conflict with the kernel names. So, don't use "eth[0-9]+" for the
 interface name. Better name it "bootnet" or "bluesocket".
 
-**bootdev=**_<interface>_::
+**bootdev=**__<interface>__::
     specify network interface to use routing and netroot information from.
     Required if multiple ip= lines are used.
 
+**BOOTIF=**__<MAC>__::
+    specify network interface to use routing and netroot information from.
+
+**rd.bootif=0**::
+    Disable BOOTIF parsing, which is provided by PXE
+
 **nameserver=**__<IP>__ [**nameserver=**__<IP>__ ...]::
     specify nameserver(s) to use
 
 **biosdevname=0**::
     boolean, turn off biosdevname network interface renaming
 
-**vlan=_<vlanname>_:_<phydevice>_**::
-    Setup vlan device named <vlanname> on <phydeivce>.
-    We support the four styles of vlan names: VLAN_PLUS_VID (vlan0005), VLAN_PLUS_VID_NO_PAD (vlan5),
-    DEV_PLUS_VID (eth0.0005), DEV_PLUS_VID_NO_PAD (eth0.5)
+**rd.neednet=1**::
+    boolean, bring up network even without netroot set
 
-**bond=_<bondname>_[:_<bondslaves>_:[:_<options>_]]**::
+**vlan=**__<vlanname>__:__<phydevice>__::
+    Setup vlan device named <vlanname> on <phydeivce>.
+    We support the four styles of vlan names: VLAN_PLUS_VID (vlan0005),
+    VLAN_PLUS_VID_NO_PAD (vlan5), DEV_PLUS_VID (eth0.0005),
+    DEV_PLUS_VID_NO_PAD (eth0.5)
+
+**bond=**__<bondname>__[:__<bondslaves>__:[:__<options>__]]::
     Setup bonding device <bondname> on top of <bondslaves>.
     <bondslaves> is a comma-separated list of physical (ethernet) interfaces.
-    <options> is a comma-separated list on bonding options (modinfo bonding for details)
-    in format compatible with initscripts. If <options> includes multi-valued arp_ip_target option,
-    then its values should be separated by semicolon.
-    Bond without parameters assumes bond=bond0:eth0,eth1:mode=balance-rr
+    <options> is a comma-separated list on bonding options (modinfo bonding for
+    details) in format compatible with initscripts. If <options> includes
+    multi-valued arp_ip_target option, then its values should be separated by
+    semicolon. Bond without parameters assumes
+    bond=bond0:eth0,eth1:mode=balance-rr
 
-**bridge=_<bridgename>_:_<ethnames>_**::
+**team=**__<teammaster>__:__<teamslaves>__::
+    Setup team device <teammaster> on top of <teamslaves>.
+    <teamslaves> is a comma-separated list of physical (ethernet) interfaces.
+
+**bridge=**__<bridgename>__:__<ethnames>__::
     Setup bridge <bridgename> with <ethnames>. <ethnames> is a comma-separated
-    list of physical (ethernet) interfaces. Bridge without parameters assumes bridge=br0:eth0
-
+    list of physical (ethernet) interfaces. Bridge without parameters assumes
+    bridge=br0:eth0
 
 NFS
 ~~~
-**root=**[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_]::
+**root=**\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__]::
     mount nfs share from <server-ip>:/<root-dir>, if no server-ip is given, use
     dhcp next_server. if server-ip is an IPv6 address it has to be put in
     brackets, e.g. [2001:DB8::1]. NFS options can be appended with the prefix
     ":" or "," and are seperated by ",".
 
-**root=**nfs:[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_], **root=**nfs4:[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_], **root=**_{dhcp|dhcp6}_::
+**root=**nfs:\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__], **root=**nfs4:\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__], **root=**__{dhcp|dhcp6}__::
     root=dhcp alone directs initrd to look at the DHCP root-path where NFS
     options can be specified.
 +
-----
+[listing]
+.Example
+--
     root-path=<server-ip>:<root-dir>[,<nfs-options>]
     root-path=nfs:<server-ip>:<root-dir>[,<nfs-options>]
     root-path=nfs4:<server-ip>:<root-dir>[,<nfs-options>]
-----
+--
 
-**root=**_/dev/nfs_ nfsroot=[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_]::
+**root=**_/dev/nfs_ nfsroot=\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__]::
     _Deprecated!_ kernel Documentation_/filesystems/nfsroot.txt_ defines this
     method. This is supported by dracut, but not recommended.
 
-**rd.nfs.domain=**_<NFSv4 domain name>_::
+**rd.nfs.domain=**__<NFSv4 domain name>__::
     Set the NFSv4 domain name. Will overwrite the settings in _/etc/idmap.conf_.
 
+CIFS
+~~~
+**root=**cifs://[__<username>__[:__<password>__]@]__<server-ip>__:__<root-dir>__::
+    mount cifs share from <server-ip>:/<root-dir>, if no server-ip is given, use
+    dhcp next_server. if server-ip is an IPv6 address it has to be put in
+    brackets, e.g. [2001:DB8::1]. If a username or password are not specified
+as part of the root, then they must be passed on the command line through
+cifsuser/cifspass.
++
+WARNING: Passwords specified on the kernel command line are visible for all
+users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the
+network, when using DHCP with DHCP root-path.
+
+**cifsuser**=__<username>__::
+    Set the cifs username, if not specified as part of the root.
+
+**cifspass**=__<password>__::
+    Set the cifs password, if not specified as part of the root.
++
+WARNING: Passwords specified on the kernel command line are visible for all
+users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the
+network, when using DHCP with DHCP root-path.
+
 iSCSI
 ~~~~~
-**root=**iscsi:[_<username>_:_<password>_[:_<reverse>_:_<password>_]@][_<servername>_]:[_<protocol>_]:[_<port>_][:[_<iscsi_iface_name>_]:[_<netdev_name>_]]:[_<LUN>_]:_<targetname>_::
+**root=**iscsi:[__<username>__:__<password>__[:__<reverse>__:__<password>__]@][__<servername>__]:[__<protocol>__]:[__<port>__][:[__<iscsi_iface_name>__]:[__<netdev_name>__]]:[__<LUN>__]:__<targetname>__::
     protocol defaults to "6", LUN defaults to "0". If the "servername" field is
     provided by BOOTP or DHCP, then that field is used in conjunction with other
     associated fields to contact the boot server in the Boot stage. However, if
@@ -404,70 +583,92 @@ iSCSI
     used in the Discovery Service stage in conjunction with other associated
     fields. See
     link:$$http://tools.ietf.org/html/rfc4173#section-5$$[rfc4173].
-    e.g.:
 +
-----
+WARNING: Passwords specified on the kernel command line are visible for all
+users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the
+network, when using DHCP with DHCP root-path.
++
+[listing]
+.Example
+--
 root=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0
-----
+--
 +
-If servername is an IPv6 address, it has to be put in brackets. e.g.:
+If servername is an IPv6 address, it has to be put in brackets:
 +
-----
+[listing]
+.Example
+--
 root=iscsi:[2001:DB8::1]::::iqn.2009-06.dracut:target0
-----
+--
 
-**root=**_???_ **netroot=**iscsi:[_<username>_:_<password>_[:_<reverse>_:_<password>_]@][_<servername>_]:[_<protocol>_]:[_<port>_][:[_<iscsi_iface_name>_]:[_<netdev_name>_]]:[_<LUN>_]:_<targetname>_ ...::
-    multiple netroot options allow setting up multiple iscsi disks. e.g.:
+**root=**__???__ **netroot=**iscsi:[__<username>__:__<password>__[:__<reverse>__:__<password>__]@][__<servername>__]:[__<protocol>__]:[__<port>__][:[__<iscsi_iface_name>__]:[__<netdev_name>__]]:[__<LUN>__]:__<targetname>__ ...::
+    multiple netroot options allow setting up multiple iscsi disks:
 +
-----
+[listing]
+.Example
+--
 root=UUID=12424547
 netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0
 netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target1
-----
+--
 +
-If servername is an IPv6 address, it has to be put in brackets. e.g.:
+If servername is an IPv6 address, it has to be put in brackets:
 +
-----
+[listing]
+.Example
+--
 netroot=iscsi:[2001:DB8::1]::::iqn.2009-06.dracut:target0
-----
+--
++
+WARNING: Passwords specified on the kernel command line are visible for all
+users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the
+network, when using DHCP with DHCP root-path.
+You may want to use rd.iscsi.firmware.
 
-**root=**_???_ **rd.iscsi.initiator=**_<initiator>_ **rd.iscsi.target.name=**_<target name>_  **rd.iscsi.target.ip=**_<target ip>_ **rd.iscsi.target.port=**_<target port>_ **rd.iscsi.target.group=**_<target group>_ **rd.iscsi.username=**_<username>_ **rd.iscsi.password=**_<password>_ **rd.iscsi.in.username=**_<in username>_ **rd.iscsi.in.password=**_<in password>_::
+**root=**__???__ **rd.iscsi.initiator=**__<initiator>__ **rd.iscsi.target.name=**__<target name>__  **rd.iscsi.target.ip=**__<target ip>__ **rd.iscsi.target.port=**__<target port>__ **rd.iscsi.target.group=**__<target group>__ **rd.iscsi.username=**__<username>__ **rd.iscsi.password=**__<password>__ **rd.iscsi.in.username=**__<in username>__ **rd.iscsi.in.password=**__<in password>__::
     manually specify all iscsistart parameter (see **+iscsistart --help+**)
++
+WARNING: Passwords specified on the kernel command line are visible for all
+users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the
+network, when using DHCP with DHCP root-path.
+You may want to use rd.iscsi.firmware.
 
 **root=**_???_ **netroot=**iscsi **rd.iscsi.firmware=1**::
  will read the iscsi parameter from the BIOS firmware
 
-**rd.iscsi.param=**_<param>_::
+**rd.iscsi.param=**__<param>__::
     <param> will be passed as "--param <param>" to iscsistart.
     This parameter can be specified multiple times.
-    e.g.:
 +
-----
-"netroot=iscsi iscsi_firmware rd.iscsi.param=node.session.timeo.replacement_timeout=30"
-----
+[listing]
+.Example
+--
+"netroot=iscsi rd.iscsi.firmware=1 rd.iscsi.param=node.session.timeo.replacement_timeout=30"
+--
 +
 will result in
 +
-----
+[listing]
+--
 iscsistart -b --param node.session.timeo.replacement_timeout=30
-----
+--
 
 FCoE
 ~~~~
-**fcoe=**_<edd|interface|MAC>_:_{dcb|nodcb}_::
+**fcoe=**__<edd|interface|MAC>__:__{dcb|nodcb}__::
     Try to connect to a FCoE SAN through the NIC specified by _<interface>_ or
     _<MAC>_ or EDD settings. For the second argument, currently only nodcb is
     supported. This parameter can be specified multiple times.
 +
-[NOTE]
-letters in the MAC-address must be lowercase!
+NOTE: letters in the MAC-address must be lowercase!
 
 NBD
 ~~~
-**root=**??? **netroot=**nbd:_<server>_:_<port>_[:_<fstype>_[:_<mountopts>_[:_<nbdopts>_]]]::
+**root=**??? **netroot=**nbd:__<server>__:__<port>__[:__<fstype>__[:__<mountopts>__[:__<nbdopts>__]]]::
     mount nbd share from <server>
 
-**root=dhcp** with **dhcp** **root-path=**nbd:_<server>_:_<port>_[:_<fstype>_[:_<mountopts>_[:_<nbdopts>_]]]::
+**root=dhcp** with **dhcp** **root-path=**nbd:__<server>__:__<port>__[:__<fstype>__[:__<mountopts>__[:__<nbdopts>__]]]::
     root=dhcp alone directs initrd to look at the DHCP root-path where NBD
     options can be specified. This syntax is only usable in cases where you are
     directly mounting the volume as the rootfs.
@@ -479,25 +680,29 @@ DASD
 
 ZFCP
 ~~~~
-**rd.zfcp=**_<zfcp adaptor device bus ID>_,_<WWPN>_,_<FCPLUN>_::
-    rd.zfcp can be specified multiple times on the kernel command line. e.g.: 
+**rd.zfcp=**__<zfcp adaptor device bus ID>__,__<WWPN>__,__<FCPLUN>__::
+    rd.zfcp can be specified multiple times on the kernel command line.
 +
-----
+[listing]
+.Example
+--
 rd.zfcp=0.0.4000,0x5005076300C213e9,0x5022000000000000
-----
+--
 
 **rd.zfcp.conf=0**::
     ignore zfcp.conf included in the initramfs
 
 ZNET
 ~~~~
-**rd.znet=**_<nettype>_,_<subchannels>_,_<options>_::
-    rd.znet can be specified multiple times on the kernel command line. e.g.: 
+**rd.znet=**__<nettype>__,__<subchannels>__,__<options>__::
+    rd.znet can be specified multiple times on the kernel command line.
 +
-----
+[listing]
+.Example
+--
 rd.znet=qeth,0.0.0600,0.0.0601,0.0.0602,layer2=1,portname=foo
-rd.znet=ctc,0.0.0600,0.0.0601,0.0.0602,protocol=bar
-----
+rd.znet=ctc,0.0.0600,0.0.0601,protocol=bar
+--
 
 Plymouth Boot Splash
 ~~~~~~~~~~~~~~~~~~~~
@@ -509,37 +714,46 @@ Plymouth Boot Splash
 
 Kernel keys
 ~~~~~~~~~~~
-**masterkey=**_<kernel master key path name>_::
-    Set the path name of the kernel master key. e.g.: 
+**masterkey=**__<kernel master key path name>__::
+    Set the path name of the kernel master key.
 +
-----
+[listing]
+.Example
+--
 masterkey=/etc/keys/kmk-trusted.blob
-----
+--
 
-**masterkeytype=**_<kernel master key type>_::
-    Set the type of the kernel master key. e.g.: 
+**masterkeytype=**__<kernel master key type>__::
+    Set the type of the kernel master key.
 +
-----
+[listing]
+.Example
+--
 masterkeytype=trusted
-----
+--
 
-**evmkey=**_<EVM key path name>_::
-    Set the path name of the EVM key. e.g.: 
+**evmkey=**__<EVM key path name>__::
+    Set the path name of the EVM key.
 +
-----
+[listing]
+.Example
+--
 evmkey=/etc/keys/evm-trusted.blob
-----
+--
 
-**ecryptfskey=**_<eCryptfs key path name>_::
-    Set the path name of the eCryptfs key. e.g.: 
+**ecryptfskey=**__<eCryptfs key path name>__::
+    Set the path name of the eCryptfs key.
 +
-----
+[listing]
+.Example
+--
 ecryptfskey=/etc/keys/ecryptfs-trusted.blob
-----
+--
 
 Deprecated, renamed Options
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Here is a list of options, which were used in dracut prior to version 008, and their new replacement.
+Here is a list of options, which were used in dracut prior to version 008, and
+their new replacement.
 
 rdbreak:: rd.break
 
@@ -673,7 +887,8 @@ _/etc/conf.d/_::
     set in the configuration files.
 
 _/etc/cmdline_::
-    Can contain additional command line options.
+    Can contain additional command line options. Deprecated, better use
+    /etc/cmdline.d/*.conf.
 
 _/etc/cmdline.d/*.conf_::
     Can contain additional command line options.

dracut.conf

@@ -1,21 +1,21 @@
 # PUT YOUR CONFIG HERE OR IN separate files named *.conf
 # in /etc/dracut.conf.d
-# /etc/dracut.conf.d/*.conf will override the settings in here
+# SEE man dracut.conf(5)
 
 # Sample dracut config file
 
-logfile=/var/log/dracut.log
-fileloglvl=6
+#logfile=/var/log/dracut.log
+#fileloglvl=6
 
 # Exact list of dracut modules to use.  Modules not listed here are not going
 # to be included.  If you only want to add some optional modules use
 # add_dracutmodules option instead.
 #dracutmodules+=""
 
-# Dracut modules to omit
+# dracut modules to omit
 #omit_dracutmodules+=""
 
-# Dracut modules to add to the default
+# dracut modules to add to the default
 #add_dracutmodules+=""
 
 # additional kernel modules to the default
@@ -29,10 +29,10 @@ fileloglvl=6
 #
 
 # install local /etc/mdadm.conf
-mdadmconf="yes"
+#mdadmconf="no"
 
 # install local /etc/lvm/lvm.conf
-lvmconf="yes"
+#lvmconf="no"
 
 # A list of fsck tools to install. If it's not specified, module's hardcoded
 # default is used, currently: "umount mount /sbin/fsck* xfs_db xfs_check
@@ -43,6 +43,9 @@ lvmconf="yes"
 # inhibit installation of any fsck tools
 #nofscks="yes"
 
+# mount / and /usr read-only by default
+#ro_mnt="no"
+
 # set the directory for temporary files
 # default: /var/tmp
 #tmpdir=/tmp

dracut.conf.5.asc

@@ -11,16 +11,25 @@ dracut.conf - configuration file(s) for dracut
 SYNOPSIS
 --------
 _/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_
+_/usr/lib/dracut/dracut.conf.d/*.conf_
 
 Description
 -----------
 _dracut.conf_ is loaded during the initialisation phase of dracut. Command line
-parameter will overwrite any values set here. _dracut.conf.d/*.conf_ files are
-read in alphanumerical order and will overwrite parameters set in
-_/etc/dracut.conf_. Each line specifies an attribute and a value. A '#'
+parameter will overwrite any values set here.
+
+_*.conf_ files are read from /usr/lib/dracut/dracut.conf.d and
+/etc/dracut.conf.d. Files with the same name in /etc/dracut.conf.d will replace
+files in /usr/lib/dracut/dracut.conf.d.
+The files are then read in alphanumerical order and will overwrite parameters
+set in _/etc/dracut.conf_. Each line specifies an attribute and a value. A '#'
 indicates the beginning of a comment; following characters, up to the end of the
 line are not interpreted.
 
+dracut command line options will overwrite any values set here.
+
+Configuration files must have the extension .conf; other extensions are ignored.
+
 *dracutmodules+=*" __<dracut modules>__ "::
     Specify a space-separated list of dracut modules to call when building the
     initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
@@ -44,10 +53,6 @@ line are not interpreted.
     Specify a space-separated list of kernel modules not to add to the
     initramfs. The kernel modules have to be specified without the ".ko" suffix.
 
-*install_items+=*" __<kernel modules>__ "::
-    Specify a space-separated list of files, which are added to the initramfs
-    image.
-
 *filesystems+=*" __<filesystem names>__ "::
     Specify a space-separated list of kernel filesystem modules to exclusively
     include in the generic initramfs.
@@ -64,16 +69,25 @@ line are not interpreted.
 *do_strip=*"__{yes|no}__"::
     Strip binaries in the initramfs (default=yes)
 
+*do_prelink=*"__{yes|no}__"::
+    Prelink binaries in the initramfs (default=yes)
+
 *hostonly=*"__{yes|no}__"::
     Host-Only mode: Install only what is needed for booting the local host
     instead of a generic host and generate host-specific configuration.
 
+*persistent_policy=*"__<policy>__"::
+    Use _<policy>_ to address disks and partitions.
+    _<policy>_ can be any directory name found in /dev/disk.
+    E.g. "by-uuid", "by-label"
+
 *tmpdir=*"__<temporary directory>__"::
     Specify temporary directory to use.
 
 [WARNING]
 ====
-If chrooted to another root other than the real root device, use --fstab and provide a valid _/etc/fstab_.
+If chrooted to another root other than the real root device, use --fstab and
+provide a valid _/etc/fstab_.
 ====
 
 *use_fstab=*"__{yes|no}__"::
@@ -82,6 +96,11 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *add_fstab+=*" __<filename>__ "::
     Add entries of __<filename>__ to the initramfs /etc/fstab.
 
+*add_device+=*" __<device>__ "::
+    Bring up _<device>_ in initramfs, _<device>_ should be the device name.
+    This can be useful in hostonly mode for resume support when your swap is on
+    LVM an encrypted partition.
+
 *mdadmconf=*"__{yes|no}__"::
     Include local _/etc/mdadm.conf_ (default=yes)
 
@@ -97,12 +116,36 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *nofscks=*"__{yes|no}__"::
     If specified, inhibit installation of any fsck tools.
 
+*ro_mnt=*"__{yes|no}__"::
+    Mount _/_ and _/usr_ read-only by default.
+
+*kernel_cmdline=*"__parameters__"::
+    Specify default kernel command line parameters
+
 *kernel_only=*"__{yes|no}__"::
     Only install kernel drivers and firmware files. (default=no)
 
-*no_kernel=*"{yes|no}"::
+*no_kernel=*"__{yes|no}__"::
     Do not install kernel drivers and firmware files (default=no)
 
+*acpi_override=*"__{yes|no}__"::
+    [WARNING] ONLY USE THIS IF YOU KNOW WHAT YOU ARE DOING! +
+    Override BIOS provided ACPI tables. For further documentation read
+    Documentation/acpi/initrd_table_override.txt in the kernel sources.
+    Search for ACPI table files (must have .aml suffix) in acpi_table_dir=
+    directory (see below) and add them to a separate uncompressed cpio
+    archive. This cpio archive gets glued (concatenated, uncompressed one
+    must be the first one) to the compressed cpio archive. The first,
+    uncompressed cpio archive is for data which the kernel must be able
+    to access very early (and cannot make use of uncompress alogrithms yet)
+    like microcode or ACPI tables (default=no).
+
+*acpi_table_dir=*"__<dir>__"::
+    Directory to search for ACPI tables if acpi_override= is set to yes.
+
+*early_microcode=*"{yes|no}"::
+    Combine early microcode with ramdisk (default=no)
+
 *stdloglvl*="__\{0-6\}__"::
     Set logging to standard error level.
 
@@ -116,16 +159,27 @@ If chrooted to another root other than the real root device, use --fstab and pro
     Path to log file.
 
 *show_modules=*"__{yes|no}__"::
-    Print included module's name to standard output during build.
+    Print the name of the included modules to standard output during build.
+
+*i18n_vars="__<variable mapping>__"::
+    Distribution specific variable mapping.
+    See dracut/modules.d/10i18n/README for a detailed description.
+
+*i18n_default_font=*"__<fontname>__"::
+    The font <fontname> to install, if not specified otherwise.
+    Default is "LatArCyrHeb-16".
+
+*i18n_install_all=*"__{yes|no}__"::
+    Install everything regardless of generic or hostonly mode.
 
 Files
 -----
 _/etc/dracut.conf_::
     Old configuration file. You better use your own file in
-    _/etc/dracut/conf.d/_.
+    _/etc/dracut.conf.d/_.
 
-_/etc/dracut/conf.d/_::
-    Any _/etc/dracut/conf.d/*.conf_ file can overwrite the values in
+_/etc/dracut.conf.d/_::
+    Any _/etc/dracut.conf.d/*.conf_ file can overwrite the values in
     _/etc/dracut.conf_. The configuration files are read in alphanumerical
     order.
 

dracut.conf.d/fedora.conf.example

@@ -1,13 +1,15 @@
-# Dracut config file customized for RedHat/Fedora.
+# dracut config file customized for RedHat/Fedora.
 
 # i18n
 i18n_vars="/etc/sysconfig/keyboard:KEYTABLE-KEYMAP /etc/sysconfig/i18n:SYSFONT-FONT,FONTACM-FONT_MAP,FONT_UNIMAP"
-omit_drivers+=" .*/fs/ocfs/.* "
+i18n_default_font="latarcyrheb-sun16"
+i18n_install_all="yes"
 stdloglvl=3
+sysloglvl=5
 install_items+=" vi /etc/virc ps grep cat rm "
 prefix="/"
 systemdutildir=/usr/lib/systemd
 systemdsystemunitdir=/usr/lib/systemd/system
+systemdsystemconfdir=/etc/systemd/system
 udevdir=/usr/lib/udev
-add_dracutmodules+=" systemd "
-realinitpath="/usr/lib/systemd/systemd"
+hostonly="yes"

dracut.conf.d/gentoo-openrc.conf.example

@@ -1,9 +0,0 @@
-# /etc/dracut.conf.d/gentoo-openrc.conf
-# Dracut config file customized for Gentoo Base System release 2
-
-#
-# Modules
-#
-
-# i18n
-i18n_vars="/etc/conf.d/keymaps:keymap-KEYMAP,extended_keymaps-EXT_KEYMAPS /etc/conf.d/consolefont:consolefont-FONT,consoletranslation-FONT_MAP /etc/rc.conf:unicode-UNICODE"

dracut.conf.d/gentoo-systemd.conf.example

@@ -0,0 +1,5 @@
+# /etc/dracut.conf.d/gentoo-systemd.conf
+
+# Paths of systemd dirs on Gentoo
+systemdutildir=/usr/lib/systemd
+systemdsystemunitdir=/usr/lib/systemd/system

dracut.conf.d/gentoo.conf.example

@@ -1,9 +1,15 @@
 # /etc/dracut.conf.d/gentoo.conf
-# Dracut config file customized for Gentoo Base System release 1
+# dracut config file customized for Gentoo Base System release 2
+
+udevdir=/lib/udev
+ro_mnt=yes
 
 #
 # Modules
 #
 
 # i18n
-i18n_vars="/etc/conf.d/keymaps:KEYMAP,EXTENDED_KEYMAPS-EXT_KEYMAPS /etc/conf.d/consolefont:CONSOLEFONT-FONT,CONSOLETRANSLATION-FONT_MAP /etc/rc.conf:UNICODE"
+i18n_vars="/etc/conf.d/keymaps:keymap-KEYMAP,extended_keymaps-EXT_KEYMAPS /etc/conf.d/consolefont:consolefont-FONT,consoletranslation-FONT_MAP /etc/rc.conf:unicode-UNICODE"
+i18n_default_font="LatArCyrHeb-16"
+
+omit_drivers+=" i2o_scsi"

dracut.conf.d/suse.conf.example

@@ -1,2 +1,3 @@
 i18n_vars="/etc/sysconfig/language:RC_LANG-LANG,RC_LC_ALL-LC_ALL /etc/sysconfig/console:CONSOLE_UNICODEMAP-FONT_UNIMAP,CONSOLE_FONT-FONT,CONSOLE_SCREENMAP-FONT_MAP /etc/sysconfig/keyboard:KEYTABLE-KEYMAP"
+omit_drivers+=" i2o_scsi"
 

dracut.modules.7.asc

@@ -0,0 +1,299 @@
+DRACUT.MODULES(7)
+=================
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+dracut.modules - dracut modules
+
+DESCRIPTION
+-----------
+
+dracut uses a modular system to build and extend the initramfs image. All
+modules are located in _/usr/lib/dracut/modules.d_ or in _<git-src>/modules.d_.
+The most basic dracut module is _99base_. In _99base_ the initial shell script
+init is defined, which gets run by the kernel after initramfs loading. Although
+you can replace init with your own version of _99base_, this is not encouraged.
+Instead you should use, if possible, the hooks of dracut. All hooks, and the
+point of time in which they are executed, are described in <<stages>>.
+
+The main script, which creates the initramfs is dracut itsself. It parses all
+arguments and sets up the directory, in which everything is installed. It then
+executes all check, install, installkernel scripts found in the modules, which
+are to be processed. After everything is installed, the install directory is
+archived and compressed to the final initramfs image. All helper functions used
+by check, install and installkernel are found in in the file _dracut-functions_.
+These shell functions are available to all module installer (install,
+installkernel) scripts, without the need to source _dracut-functions_.
+
+A module can check the preconditions for install and installkernel with the
+check script. Also dependencies can be expressed with check. If a module passed
+check, install and installkernel will be called to install all of the necessary
+files for the module. To split between kernel and non-kernel parts of the
+installation, all kernel module related parts have to be in installkernel. All
+other files found in a module directory are module specific and mostly are hook
+scripts and udev rules.
+
+
+[[stages]]
+== Boot Process Stages
+
+dracut modules can insert custom script at various points, to control the boot
+process.
+These hooks are plain directories containing shell scripts ending with ".sh",
+which are sourced by init.
+Common used functions are in _dracut-lib.sh_, which can be sourced by any script.
+
+=== Hook: cmdline
+
+The _cmdline_ hook is a place to insert scripts to parse the kernel command line
+and prepare the later actions, like setting up udev rules and configuration
+files.
+
+In this hook the most important environment variable is defined: root. The
+second one is rootok, which indicates, that a module claimed to be able to parse
+the root defined. So for example, **root=**__iscsi:....__ will be claimed by the
+iscsi dracut module, which then sets rootok.
+
+=== Hook: pre-udev
+
+This hook is executed right after the cmdline hook and a check if root and
+rootok were set. Here modules can take action with the final root, and before
+udev has been run.
+
+=== Start Udev
+
+Now udev is started and the logging for udev is setup.
+
+=== Hook: pre-trigger
+
+In this hook, you can set udev environment variables with **udevadm control
+--property=KEY=_value_** or control the further execution of udev with
+udevadm.
+
+=== Trigger Udev
+
+udev is triggered by calling udevadm trigger, which sends add events for all
+devices and subsystems.
+
+=== Main Loop
+
+In the main loop of dracut loops until udev has settled and
+all scripts in _initqueue/finished_ returned true.
+In this loop there are three hooks, where scripts can be inserted
+by calling /sbin/initqueue.
+
+==== Initqueue
+
+This hook gets executed every time a script is inserted here, regardless of the
+udev state.
+
+==== Initqueue settled
+
+This hooks (initqueue/settled) gets executed every time udev has settled.
+
+==== Initqueue timeout
+
+This hooks (initqueue/timeout) gets executed, when the main loop counter becomes
+half of the rd.retry counter.
+
+==== Initqueue finished
+
+This hook (initqueue/finished) is called after udev has settled and
+if all scripts herein return 0 the main loop will be ended.
+Abritary scripts can be added here, to loop in the
+initqueue until something happens, which a dracut module wants to wait for.
+
+=== Hook: pre-mount
+
+Before the root device is mounted all scripts in the hook pre-mount are
+executed. In some cases (e.g. NFS) the real root device is already mounted,
+though.
+
+=== Hook: mount
+
+This hook is mainly to mount the real root device.
+
+=== Hook: pre-pivot
+
+This hook is called before cleanup hook, This is a good place for
+actions other than cleanups which need to be called before pivot.
+
+=== Hook: cleanup
+
+This hook is the last hook and is called before init finally switches root to
+the real root device. This is a good place to clean up and kill processes not
+needed anymore.
+
+
+=== Cleanup and switch_root
+
+Init (or systemd) kills all udev processes, cleans up the environment,
+sets up the arguments for the real init process and finally calls switch_root.
+switch_root removes the whole filesystem hierarchy of the initramfs,
+chroot()s to the real root device and calls /sbin/init with the specified
+arguments.
+
+To ensure all files in the initramfs hierarchy can be removed, all processes
+still running from the initramfs should not have any open file descriptors left.
+
+== Network Infrastructure
+
+FIXME
+
+== Writing a Module
+
+A simple example module is _96insmodpost_, which modprobes a kernel module after
+udev has settled and the basic device drivers have been loaded.
+
+All module installation information is in the file module-setup.sh.
+
+First we create a check() function, which just exits with 0 indicating that this
+module should be included by default.
+
+check():
+----
+return 0
+----
+
+The we create the install() function, which installs a cmdline hook with
+priority number 20 called _parse-insmodpost.sh_. It also installs the
+_insmodpost.sh_ script in _/sbin_.
+
+install():
+----
+inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
+inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
+----
+
+The _pase-instmodpost.sh_ parses the kernel command line for a argument
+rd.driver.post, blacklists the module from being autoloaded and installs the
+hook _insmodpost.sh_ in the _initqueue/settled_.
+
+_parse-insmodpost.sh_:
+----
+for p in $(getargs rd.driver.post=); do
+    echo "blacklist $p" >> /etc/modprobe.d/initramfsblacklist.conf
+    _do_insmodpost=1
+done
+
+[ -n "$_do_insmodpost" ] && /sbin/initqueue --settled --unique --onetime /sbin/insmodpost.sh
+unset _do_insmodpost
+
+----
+
+_insmodpost.sh_, which is called in the _initqueue/settled_ hook will just
+modprobe the kernel modules specified in all rd.driver.post kernel command line
+parameters. It runs after udev has settled and is only called once (--onetime).
+
+_insmodpost.sh_:
+----
+. /lib/dracut-lib.sh
+
+for p in $(getargs rd.driver.post=); do
+    modprobe $p
+done
+
+----
+
+
+=== module-setup.sh: check()
+
+_check()_ is called by dracut to evaluate the inclusion of a dracut module in
+the initramfs.
+
+$hostonly:: If the $hostonly variable is set, then the module check() function
+should be in "hostonly" mode, which means, that the check() should only return
+0, if the module is really needed to boot this specific host.
+
+check() should return with:
+
+0:: Include the dracut module in the initramfs.
+
+1:: Do not include the dracut module. The requirements are not fullfilled
+(missing tools, etc.)
+
+255:: Only include the dracut module, if another module requires it or if
+explicitly specified in the config file or on the argument list.
+
+
+=== module-setup.sh: depends()
+
+The function depends() should echo all other dracut module names the module
+depends on.
+
+=== module-setup.sh: cmdline()
+
+This function should print the kernel command line options needed to boot the
+current machine setup. It should start with a space and should not print a
+newline.
+
+=== module-setup.sh: install()
+
+The install() function is called to install everything non-kernel related.
+To install binaries, scripts, and other files, you can use the functions
+mentioned in <<creation>>.
+
+To address a file in the current module directory, use the variable "$moddir".
+
+=== module-setup.sh: installkernel()
+
+In installkernel() all kernel related files should be installed. You can use all
+of the functions mentioned in <<creation>> to install files.
+
+=== [[creation]]Creation Functions
+
+==== inst_multiple [-o] <file> [ <file> ...]
+
+installs multiple binaries and files. If executables are specified without a
+path, dracut will search the path PATH=/usr/sbin:/sbin:/usr/bin:/bin for the
+binary. If the option "-o" is given as the first parameter, a missing file does
+not lead to an error.
+
+==== inst <src> [<dst>]
+
+installs _one_ file <src> either to the same place in the initramfs or to an
+optional <dst>.
+
+==== inst_hook <hookdir> <prio> <src>
+
+installs an executable/script <src> in the dracut hook <hookdir> with priority
+<prio>.
+
+==== inst_rules <udevrule> [ <udevrule> ...]
+
+installs one ore more udev rules. Non-existant udev rules are reported, but do
+not let dracut fail.
+
+==== instmods <kernelmodule> [ <kernelmodule> ... ]
+
+instmods should be used only in the installkernel() function.
+
+instmods installs one or more kernel modules in the initramfs. <kernelmodule>
+can also be a whole subsystem, if prefixed with a "=", like "=drivers/net/team".
+
+instmods will not install the kernel module, if $hostonly is set and the kernel
+module is not currently needed by any /sys/*...*/uevent MODALIAS.
+To install a kernel module regardless of the hostonly mode use the form:
+----
+hostonly='' instmods <kernelmodule>
+----
+
+=== Initramfs Functions
+
+FIXME
+
+
+=== Network Modules
+
+FIXME
+
+AUTHOR
+------
+Harald Hoyer
+
+SEE ALSO
+--------
+*dracut*(8)

dracut.spec

@@ -1,4 +1,5 @@
 %define dracutlibdir %{_prefix}/lib/dracut
+%bcond_without doc
 
 # Variables must be defined
 %define with_nbd                1
@@ -21,24 +22,31 @@ Group: System/Base
 %endif
 
 # The entire source code is GPLv2+
-# except install/* which is LGPLv2.1+
-License: GPLv2+ and LGPLv2.1+
+# except install/* which is LGPLv2+
+License: GPLv2+ and LGPLv2+
 
 URL: https://dracut.wiki.kernel.org/
 
 # Source can be generated by
 # http://git.kernel.org/?p=boot/dracut/dracut.git;a=snapshot;h=%{version};sf=tgz
-Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.bz2
+Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.xz
 
-BuildRequires: dash bash git
+BuildRequires: bash git
 
 %if 0%{?fedora} || 0%{?rhel}
 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+BuildRequires: pkgconfig
 %endif
+%if 0%{?fedora}
+BuildRequires: bash-completion
+BuildRequires: pkgconfig
+%endif
+
 %if 0%{?suse_version}
 BuildRoot: %{_tmppath}/%{name}-%{version}-build
 %endif
 
+%if %{with doc}
 %if 0%{?fedora} || 0%{?rhel}
 BuildRequires: docbook-style-xsl docbook-dtds libxslt
 %endif
@@ -48,6 +56,8 @@ BuildRequires: docbook-style-xsl docbook-dtds libxslt
 %endif
 
 BuildRequires: asciidoc
+%endif
+
 
 %if 0%{?fedora} > 12 || 0%{?rhel}
 # no "provides", because dracut does not offer
@@ -70,7 +80,11 @@ Provides: mkinitrd = 2.6.1
 Obsoletes: dracut-kernel < 005
 Provides:  dracut-kernel = %{version}-%{release}
 
-Requires: bash
+Obsoletes: dracut <= 029
+Obsoletes: dracut-norescue
+Provides:  dracut-norescue
+
+Requires: bash >= 4
 Requires: coreutils
 Requires: cpio
 Requires: filesystem >= 2.1.0
@@ -78,32 +92,38 @@ Requires: findutils
 Requires: grep
 Requires: hardlink
 Requires: gzip xz
-Requires: module-init-tools >= 3.7-9
+Requires: kmod
 Requires: sed
-Requires: file
-Requires: udev > 166
+Requires: kpartx
+
 %if 0%{?fedora} || 0%{?rhel} > 6
 Requires: util-linux >= 2.21
-Conflicts: systemd < 187
+Requires: systemd >= 199
+Requires: procps-ng
+Conflicts: grubby < 8.23
+Conflicts: initscripts < 8.63-1
+Conflicts: plymouth < 0.8.0-0.2009.29.09.19.1
+Conflicts: bcache-tools < 0-0.14.20130909git
 %else
+Requires: udev > 166
 Requires: util-linux-ng >= 2.21
 %endif
 
-%if 0%{?fedora} || 0%{?rhel} > 6
-Conflicts: initscripts < 8.63-1
-Conflicts: plymouth < 0.8.0-0.2009.29.09.19.1
-%endif
+Conflicts: mdadm < 3.2.6-14
 
 %description
-Dracut contains tools to create a bootable initramfs for 2.6 Linux kernels.
+dracut contains tools to create a bootable initramfs for 2.6 Linux kernels.
 Unlike existing implementations, dracut does hard-code as little as possible
-into the initramfs. Dracut contains various modules which are driven by the
+into the initramfs. dracut contains various modules which are driven by the
 event-based udev. Having root on MD, DM, LVM2, LUKS is supported as well as
 NFS, iSCSI, NBD, FCoE with the dracut-network package.
 
 %package network
-Summary: Dracut modules to build a dracut initramfs with network support
+Summary: dracut modules to build a dracut initramfs with network support
 Requires: %{name} = %{version}-%{release}
+Requires: iputils
+Requires: iproute
+Requires: dhclient
 Obsoletes: dracut-generic < 008
 Provides:  dracut-generic = %{version}-%{release}
 
@@ -113,7 +133,7 @@ all purpose initramfs with network support with dracut.
 
 %if 0%{?fedora} || 0%{?rhel} >= 6 || 0%{?suse_version}
 %package fips
-Summary: Dracut modules to build a dracut initramfs with an integrity check
+Summary: dracut modules to build a dracut initramfs with an integrity check
 Requires: %{name} = %{version}-%{release}
 Requires: hmaccalc
 %if 0%{?rhel} > 5
@@ -126,29 +146,47 @@ Requires: nss-softokn-freebl
 
 %description fips
 This package requires everything which is needed to build an
-all purpose initramfs with dracut, which does an integrity check.
+initramfs with dracut, which does an integrity check.
 %endif
 
 %package fips-aesni
-Summary: Dracut modules to build a dracut initramfs with an integrity check with aesni-intel
+Summary: dracut modules to build a dracut initramfs with an integrity check with aesni-intel
 Requires: %{name}-fips = %{version}-%{release}
 
 %description fips-aesni
 This package requires everything which is needed to build an
-all purpose initramfs with dracut, which does an integrity check
-and adds the aesni-intel kernel module.
+initramfs with dracut, which does an integrity check and adds the aesni-intel kernel module.
 
 %package caps
-Summary: Dracut modules to build a dracut initramfs which drops capabilities
+Summary: dracut modules to build a dracut initramfs which drops capabilities
 Requires: %{name} = %{version}-%{release}
 Requires: libcap
 
 %description caps
 This package requires everything which is needed to build an
-all purpose initramfs with dracut, which drops capabilities.
+initramfs with dracut, which drops capabilities.
+
+%package config-generic
+Summary: dracut configuration to turn off hostonly image generation
+Requires: %{name} = %{version}-%{release}
+Obsoletes: dracut-nohostonly
+Provides:  dracut-nohostonly
+
+%description config-generic
+This package provides the configuration to turn off the host specific initramfs
+generation with dracut and generates a generic image by default.
+
+%package config-rescue
+Summary: dracut configuration to turn on rescue image generation
+Requires: %{name} = %{version}-%{release}
+Obsoletes: dracut <= 029
+
+%description config-rescue
+This package provides the configuration to turn on the rescue initramfs
+generation with dracut.
 
 %package tools
-Summary: Dracut tools to build the local initramfs
+Summary: dracut tools to build the local initramfs
 Requires: %{name} = %{version}-%{release}
 
 %description tools
@@ -169,39 +207,44 @@ git am -p1 %{patches}
 %endif
 
 %build
-make all
+%configure --systemdsystemunitdir=%{_unitdir} --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) --libdir=%{_prefix}/lib \
+%if %{without doc}
+     --disable-documentation
+%endif
+
+make %{?_smp_mflags}
 
 %install
 %if 0%{?fedora} || 0%{?rhel}
-rm -rf $RPM_BUILD_ROOT
+rm -rf -- $RPM_BUILD_ROOT
 %endif
-make install DESTDIR=$RPM_BUILD_ROOT \
-     libdir=%{_prefix}/lib \
-     bindir=%{_bindir} \
-%if %{defined _unitdir}
-     systemdsystemunitdir=%{_unitdir} \
-%endif
-     sysconfdir=/etc mandir=%{_mandir}
+make %{?_smp_mflags} install \
+     DESTDIR=$RPM_BUILD_ROOT \
+     libdir=%{_prefix}/lib
 
 echo "DRACUT_VERSION=%{version}-%{release}" > $RPM_BUILD_ROOT/%{dracutlibdir}/dracut-version.sh
 
 %if 0%{?fedora} == 0 && 0%{?rhel} == 0 && 0%{?suse_version} == 0
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/01fips
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/02fips-aesni
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/01fips
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/02fips-aesni
+%endif
+
+%if %{defined _unitdir}
+# for systemd, better use systemd-bootchart
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00bootchart
 %endif
 
 # we do not support dash in the initramfs
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00dash
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00dash
 
 # remove gentoo specific modules
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/50gensplash
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/50gensplash
 
 %if %{defined _unitdir}
 # with systemd IMA and selinux modules do not make sense
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/96securityfs
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/97masterkey
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/98integrity
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/98selinux
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/96securityfs
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/97masterkey
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/98integrity
 %endif
 
 mkdir -p $RPM_BUILD_ROOT/boot/dracut
@@ -210,36 +253,53 @@ mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/log
 touch $RPM_BUILD_ROOT%{_localstatedir}/log/dracut.log
 mkdir -p $RPM_BUILD_ROOT%{_sharedstatedir}/initramfs
 
-%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
-install -m 0644 dracut.conf.d/fedora.conf.example $RPM_BUILD_ROOT/etc/dracut.conf.d/01-dist.conf
-install -m 0644 dracut.conf.d/fips.conf.example $RPM_BUILD_ROOT/etc/dracut.conf.d/40-fips.conf
+%if 0%{?fedora} || 0%{?rhel}
+install -m 0644 dracut.conf.d/fedora.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
+rm -f $RPM_BUILD_ROOT%{_mandir}/man?/*suse*
+%endif
+%if 0%{?suse_version}
+install -m 0644 dracut.conf.d/suse.conf.example   $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
 %endif
 
-%if 0%{?suse_version}
-install -m 0644 dracut.conf.d/suse.conf.example   $RPM_BUILD_ROOT/etc/dracut.conf.d/01-dist.conf
+%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
+install -m 0644 dracut.conf.d/fips.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/40-fips.conf
 %endif
 
 %if 0%{?fedora} <= 12 && 0%{?rhel} < 6 && 0%{?suse_version} <= 9999
-rm $RPM_BUILD_ROOT%{_bindir}/mkinitrd
-rm $RPM_BUILD_ROOT%{_bindir}/lsinitrd
+rm -f -- $RPM_BUILD_ROOT%{_bindir}/mkinitrd
+rm -f -- $RPM_BUILD_ROOT%{_bindir}/lsinitrd
 %endif
 
-mkdir -p $RPM_BUILD_ROOT/etc/logrotate.d
-install -m 0644 dracut.logrotate $RPM_BUILD_ROOT/etc/logrotate.d/dracut_log
+%if 0%{?fedora} || 0%{?rhel} > 6
+# FIXME: remove after F19
+mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/kernel/postinst.d
+install -m 0755 51-dracut-rescue-postinst.sh $RPM_BUILD_ROOT%{_sysconfdir}/kernel/postinst.d/51-dracut-rescue-postinst.sh
+
+echo 'hostonly="no"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-generic-image.conf
+echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-rescue.conf
+%endif
+
+%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
+> $RPM_BUILD_ROOT/etc/system-fips
+%endif
 
 # create compat symlink
-mkdir -p $RPM_BUILD_ROOT/sbin
-ln -s /usr/bin/dracut $RPM_BUILD_ROOT/sbin/dracut
+mkdir -p $RPM_BUILD_ROOT%{_sbindir}
+ln -sr $RPM_BUILD_ROOT%{_bindir}/dracut $RPM_BUILD_ROOT%{_sbindir}/dracut
 
 %clean
-rm -rf $RPM_BUILD_ROOT
+rm -rf -- $RPM_BUILD_ROOT
 
 %files
 %defattr(-,root,root,0755)
+%if %{with doc}
 %doc README HACKING TODO COPYING AUTHORS NEWS dracut.html dracut.png dracut.svg
+%endif
 %{_bindir}/dracut
 # compat symlink
-/sbin/dracut
+%{_sbindir}/dracut
+%{_datadir}/bash-completion/completions/dracut
+%{_datadir}/bash-completion/completions/lsinitrd
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
 %{_bindir}/mkinitrd
 %{_bindir}/lsinitrd
@@ -252,25 +312,42 @@ rm -rf $RPM_BUILD_ROOT
 %{dracutlibdir}/dracut-logger.sh
 %{dracutlibdir}/dracut-initramfs-restore
 %{dracutlibdir}/dracut-install
-%config(noreplace) /etc/dracut.conf
+%{dracutlibdir}/skipcpio
+%config(noreplace) %{_sysconfdir}/dracut.conf
 %if 0%{?fedora} || 0%{?suse_version} || 0%{?rhel}
-%config /etc/dracut.conf.d/01-dist.conf
+%{dracutlibdir}/dracut.conf.d/01-dist.conf
 %endif
-%dir /etc/dracut.conf.d
+%dir %{_sysconfdir}/dracut.conf.d
+%dir %{dracutlibdir}/dracut.conf.d
+
+%if %{with doc}
 %{_mandir}/man8/dracut.8*
+%{_mandir}/man8/*service.8*
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
 %{_mandir}/man8/mkinitrd.8*
 %{_mandir}/man1/lsinitrd.1*
 %endif
 %{_mandir}/man7/dracut.kernel.7*
 %{_mandir}/man7/dracut.cmdline.7*
+%{_mandir}/man7/dracut.modules.7*
+%{_mandir}/man7/dracut.bootup.7*
 %{_mandir}/man5/dracut.conf.5*
+%endif
+
+%if %{defined _unitdir}
+%{dracutlibdir}/modules.d/00systemd-bootchart
+%else
 %{dracutlibdir}/modules.d/00bootchart
+%endif
+%{dracutlibdir}/modules.d/00bash
+%{dracutlibdir}/modules.d/03modsign
+%{dracutlibdir}/modules.d/03rescue
 %{dracutlibdir}/modules.d/04watchdog
 %{dracutlibdir}/modules.d/05busybox
 %{dracutlibdir}/modules.d/10i18n
 %{dracutlibdir}/modules.d/30convertfs
 %{dracutlibdir}/modules.d/45url-lib
+%{dracutlibdir}/modules.d/50drm
 %{dracutlibdir}/modules.d/50plymouth
 %{dracutlibdir}/modules.d/80cms
 %{dracutlibdir}/modules.d/90btrfs
@@ -284,25 +361,28 @@ rm -rf $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/90multipath
 %{dracutlibdir}/modules.d/90qemu
 %{dracutlibdir}/modules.d/91crypt-gpg
+%{dracutlibdir}/modules.d/91crypt-loop
 %{dracutlibdir}/modules.d/95debug
 %{dracutlibdir}/modules.d/95resume
 %{dracutlibdir}/modules.d/95rootfs-block
 %{dracutlibdir}/modules.d/95dasd
 %{dracutlibdir}/modules.d/95dasd_mod
+%{dracutlibdir}/modules.d/95dasd_rules
 %{dracutlibdir}/modules.d/95fstab-sys
 %{dracutlibdir}/modules.d/95zfcp
+%{dracutlibdir}/modules.d/95zfcp_rules
 %{dracutlibdir}/modules.d/95terminfo
 %{dracutlibdir}/modules.d/95udev-rules
 %{dracutlibdir}/modules.d/95virtfs
 %if %{undefined _unitdir}
 %{dracutlibdir}/modules.d/96securityfs
 %{dracutlibdir}/modules.d/97masterkey
-%{dracutlibdir}/modules.d/98selinux
 %{dracutlibdir}/modules.d/98integrity
 %endif
 %{dracutlibdir}/modules.d/97biosdevname
 %{dracutlibdir}/modules.d/98ecryptfs
 %{dracutlibdir}/modules.d/98pollcdrom
+%{dracutlibdir}/modules.d/98selinux
 %{dracutlibdir}/modules.d/98syslog
 %{dracutlibdir}/modules.d/98systemd
 %{dracutlibdir}/modules.d/98usrmount
@@ -310,12 +390,29 @@ rm -rf $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/99fs-lib
 %{dracutlibdir}/modules.d/99img-lib
 %{dracutlibdir}/modules.d/99shutdown
-%config(noreplace) /etc/logrotate.d/dracut_log
 %attr(0644,root,root) %ghost %config(missingok,noreplace) %{_localstatedir}/log/dracut.log
 %dir %{_sharedstatedir}/initramfs
 %if %{defined _unitdir}
 %{_unitdir}/dracut-shutdown.service
 %{_unitdir}/shutdown.target.wants/dracut-shutdown.service
+%{_unitdir}/dracut-cmdline.service
+%{_unitdir}/dracut-initqueue.service
+%{_unitdir}/dracut-mount.service
+%{_unitdir}/dracut-pre-mount.service
+%{_unitdir}/dracut-pre-pivot.service
+%{_unitdir}/dracut-pre-trigger.service
+%{_unitdir}/dracut-pre-udev.service
+%{_unitdir}/initrd.target.wants/dracut-cmdline.service
+%{_unitdir}/initrd.target.wants/dracut-initqueue.service
+%{_unitdir}/initrd.target.wants/dracut-mount.service
+%{_unitdir}/initrd.target.wants/dracut-pre-mount.service
+%{_unitdir}/initrd.target.wants/dracut-pre-pivot.service
+%{_unitdir}/initrd.target.wants/dracut-pre-trigger.service
+%{_unitdir}/initrd.target.wants/dracut-pre-udev.service
+
+%endif
+%if 0%{?fedora} || 0%{?rhel} > 6
+%{_prefix}/lib/kernel/install.d/50-dracut.install
 %endif
 
 %files network
@@ -325,22 +422,30 @@ rm -rf $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/95iscsi
 %{dracutlibdir}/modules.d/90livenet
 %{dracutlibdir}/modules.d/90qemu-net
+%{dracutlibdir}/modules.d/95cifs
 %{dracutlibdir}/modules.d/95nbd
 %{dracutlibdir}/modules.d/95nfs
 %{dracutlibdir}/modules.d/95ssh-client
 %{dracutlibdir}/modules.d/45ifcfg
 %{dracutlibdir}/modules.d/95znet
+%{dracutlibdir}/modules.d/95fcoe-uefi
+%{dracutlibdir}/modules.d/99uefi-lib
 
 %if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
 %files fips
 %defattr(-,root,root,0755)
 %{dracutlibdir}/modules.d/01fips
-%config(noreplace) /etc/dracut.conf.d/40-fips.conf
+%{dracutlibdir}/dracut.conf.d/40-fips.conf
+%config(missingok) /etc/system-fips
 %endif
 
 %files fips-aesni
 %defattr(-,root,root,0755)
+
+%if %{with doc}
 %doc COPYING
+%endif
+
 %{dracutlibdir}/modules.d/02fips-aesni
 
 %files caps
@@ -349,10 +454,26 @@ rm -rf $RPM_BUILD_ROOT
 
 %files tools
 %defattr(-,root,root,0755)
-%{_mandir}/man8/dracut-catimages.8*
+
+%if %{with doc}
+%doc %{_mandir}/man8/dracut-catimages.8*
+%endif
+
 %{_bindir}/dracut-catimages
 %dir /boot/dracut
 %dir /var/lib/dracut
 %dir /var/lib/dracut/overlay
 
+%files config-generic
+%defattr(-,root,root,0755)
+%{dracutlibdir}/dracut.conf.d/02-generic-image.conf
+
+%files config-rescue
+%defattr(-,root,root,0755)
+%{dracutlibdir}/dracut.conf.d/02-rescue.conf
+%if 0%{?fedora} || 0%{?rhel} > 6
+%{_prefix}/lib/kernel/install.d/51-dracut-rescue.install
+%{_sysconfdir}/kernel/postinst.d/51-dracut-rescue-postinst.sh
+%endif
+
 %changelog

dracut.usage.asc

@@ -0,0 +1,537 @@
+To create a initramfs image, the most simple command is:
+----
+# dracut
+----
+
+This will generate a general purpose initramfs image, with all possible
+functionality resulting of the combination of the installed dracut modules and
+system tools. The image is /boot/initramfs-_++<kernel version>++_.img and
+contains the kernel modules of the currently active kernel with version
+_++<kernel version>++_.
+
+If the initramfs image already exists, dracut will display an error message, and
+to overwrite the existing image, you have to use the --force option.
+----
+# dracut --force
+----
+
+If you want to specify another filename for the resulting image you would issue
+a command like:
+----
+# dracut foobar.img
+----
+
+To generate an image for a specific kernel version, the command would be:
+----
+# dracut foobar.img 2.6.40-1.rc5.f20
+----
+
+A shortcut to generate the image at the default location for a specific kernel
+version is:
+----
+# dracut --kver 2.6.40-1.rc5.f20
+----
+
+If you want to create lighter, smaller initramfs images, you may want to specify
+the --hostonly or -H option. Using this option, the resulting image will
+contain only those dracut modules, kernel modules and filesystems, which are
+needed to boot this specific machine. This has the drawback, that you can't put
+the disk on another controller or machine, and that you can't switch to another
+root filesystem, without recreating the initramfs image. The usage of the
+--hostonly option is only for experts and you will have to keep the broken
+pieces. At least keep a copy of a general purpose image (and corresponding
+kernel) as a fallback to rescue your system.
+
+=== Inspecting the Contents
+To see the contents of the image created by dracut, you can use the lsinitrd
+tool.
+----
+# lsinitrd | less
+----
+
+To display the contents of a file in the initramfs also use the lsinitrd tool:
+----
+# lsinitrd -f /etc/ld.so.conf
+include ld.so.conf.d/*.conf
+----
+
+=== Adding dracut Modules
+Some dracut modules are turned off by default and have to be activated manually.
+You can do this by adding the dracut modules to the configuration file
+_/etc/dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_. See *dracut.conf*(5).
+You can also add dracut modules on the command line
+by using the -a or --add option:
+----
+# dracut --add bootchart initramfs-bootchart.img
+----
+
+To see a list of available dracut modules, use the --list-modules option:
+----
+# dracut --list-modules
+----
+
+=== Omitting dracut Modules
+Sometimes you don't want a dracut module to be included for reasons of speed,
+size or functionality. To do this, either specify the omit_dracutmodules
+variable in the _dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_ configuration
+file (see *dracut.conf*(5)), or use the -o or --omit option
+on the command line:
+----
+# dracut -o "multipath lvm" no-multipath-lvm.img
+----
+
+=== Adding Kernel Modules
+If you need a special kernel module in the initramfs, which is not
+automatically picked up by dracut, you have the use the --add-drivers option
+on the command line or  the drivers vaiable in  the _/etc/dracut.conf_
+or _/etc/dracut.conf.d/myconf.conf_ configuration file (see *dracut.conf*(5)):
+----
+# dracut --add-drivers mymod initramfs-with-mymod.img
+----
+
+=== Boot parameters
+An initramfs generated without the "hostonly" mode, does not contain any system
+configuration files (except for some special exceptions), so the configuration
+has to be done on the kernel command line. With this flexibility, you can easily
+boot from a changed root partition, without the need to recompile the initramfs
+image. So, you could completly change your root partition (move it inside a md
+raid with encryption and LVM on top), as long as you specify the correct
+filesystem LABEL or UUID on the kernel command line for your root device, dracut
+will find it and boot from it.
+
+The kernel command line usually can be configured in _/boot/grub/grub.conf_, if
+grub is your bootloader and it also can be edited in the real boot process in
+the grub menu.
+
+The kernel command line can also be provided by the dhcp server with the
+root-path option. See <<NetworkBoot>>.
+
+For a full reference of all kernel command line parameters,
+see *dracut.cmdline*(5).
+
+To get a quick start for the suitable kernel command line on your system,
+use the __--print-cmdline__ option:
+----
+# dracut --print-cmdline
+ root=UUID=8b8b6f91-95c7-4da2-831b-171e12179081 rootflags=rw,relatime,discard,data=ordered rootfstype=ext4
+----
+
+==== Specifying the root Device
+This is the only option dracut really needs to boot from your root partition.
+Because your root partition can live in various environments, there are a lot of
+formats for the root= option. The most basic one is root=_++<path to device
+node>++_:
+----
+root=/dev/sda2
+----
+
+Because device node names can change, dependent on the drive ordering, you are
+encouraged to use the filesystem identifier (UUID) or filesystem label (LABEL)
+to specify your root partition:
+----
+root=UUID=19e9dda3-5a38-484d-a9b0-fa6b067d0331
+----
+
+or
+
+----
+root=LABEL=myrootpartitionlabel
+----
+
+To see all UUIDs or LABELs on your system, do:
+----
+# ls -l /dev/disk/by-uuid
+----
+
+or
+
+----
+# ls -l /dev/disk/by-label
+----
+
+If your root partition is on the network see <<NetworkBoot>>.
+
+==== Keyboard Settings
+If you have to input passwords for encrypted disk volumes, you might want to set
+the keyboard layout and specify a display font.
+
+A typical german kernel command would contain:
+----
+rd.vconsole.font=latarcyrheb-sun16 rd.vconsole.keymap=de-latin1-nodeadkeys rd.locale.LANG=de_DE.UTF-8
+----
+
+Setting these options can override the setting stored on your system, if you use
+a modern init system, like systemd.
+
+==== Blacklisting Kernel Modules
+Sometimes it is required to prevent the automatic kernel module loading of a
+specific kernel module. To do this, just add rd.blacklist=_++<kernel module
+name>++_, with _++<kernel module name>++_ not containing the _.ko_
+suffix, to the kernel command line. For example:
+----
+rd.driver.blacklist=mptsas rd.driver.blacklist=nouveau
+----
+
+The option can be specified multiple times on the kernel command line.
+
+==== Speeding up the Boot Process
+If you want to speed up the boot process, you can specify as much information
+for dracut on the kernel command as possible. For example, you can tell dracut,
+that you root partition is not on a LVM volume or not on a raid partition, or
+that it lives inside a specific crypto LUKS encrypted volume. By default, dracut
+searches everywhere. A typical dracut kernel command line for a plain primary or
+logical partition would contain:
+----
+rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0
+----
+
+This turns off every automatic assembly of LVM, MD raids, DM raids and
+crypto LUKS.
+
+Of course, you could also omit the dracut modules in the initramfs creation
+process, but then you would lose the posibility to turn it on on demand.
+
+
+[[Injecting]]
+=== Injecting custom Files
+To add your own files to the initramfs image, you have several possibilities.
+
+The --include option let you specify a source path and a target path.
+For example
+----
+# dracut --include cmdline-preset /etc/cmdline.d/mycmdline.conf initramfs-cmdline-pre.img
+----
+will create an initramfs image, where the file cmdline-preset will be copied
+inside the initramfs to _/etc/cmdline.d/mycmdline.conf_. --include can only
+be specified once.
+
+
+----
+# mkdir -p rd.live.overlay/etc/cmdline.d
+# mkdir -p rd.live.overlay/etc/conf.d
+# echo "ip=auto" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
+# echo export FOO=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
+# echo export BAR=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
+# tree rd.live.overlay/
+rd.live.overlay/
+`-- etc
+    |-- cmdline.d
+    |   `-- mycmdline.conf
+    `-- conf.d
+        `-- testvar.conf
+
+# dracut --include rd.live.overlay / initramfs-rd.live.overlay.img
+----
+
+This will put the contents of the rd.live.overlay directory into the root of the
+initramfs image.
+
+The --install option let you specify several files, which will get installed in
+the initramfs image at the same location, as they are present on initramfs
+creation time.
+
+
+----
+# dracut --install 'strace fsck.ext3 ssh' initramfs-dbg.img
+----
+
+This will create an initramfs with the strace, fsck.ext3 and ssh executables,
+together with the libraries needed to start those. The --install option can be
+specified multiple times.
+
+
+[[NetworkBoot]]
+=== Network Boot
+
+If your root partition is on a network drive, you have to have the network
+dracut modules installed to create a network aware initramfs image.
+
+On a Red Hat Enterprise Linux or Fedora system, this means, you have to install
+the _dracut-network_ rpm package:
+
+
+----
+# yum install dracut-network
+----
+
+The resulting initramfs image can be served by a boot manager residing on your
+local hard drive or it can be served by a PXE/TFTP server.
+
+How to setup your PXE/TFTP server can be found in the
+http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
+Hat Enterprise Linux Storage Administration Guide].
+
+If you specify ip=auto on the kernel command line, then dracut asks a dhcp
+server about the ip adress for the machine. The dhcp server can also serve an
+additional root-path, which will set the root device for dracut. With this
+mechanism, you have static configuration on your client machine and a
+centralized boot configuration on your TFTP/DHCP server. If you can't pass a
+kernel command line, then you can inject _/etc/cmdline.d/mycmdline.conf_, with a
+method described in <<Injecting>>.
+
+==== Reducing the Image Size
+
+To reduce the size of the initramfs, you should create it with by ommitting all
+dracut modules, which you know, you don't need to boot the machine.
+
+You can also specify the exact dracut and kernel modules to produce a very tiny
+initramfs image.
+
+For example for a NFS image, you would do:
+
+
+----
+# dracut -m "nfs network  base" initramfs-nfs-only.img
+----
+
+Then you would boot from this image with your target machine and reduce the size
+once more by creating it on the target machine with the --host-only option:
+
+
+----
+# dracut -m "nfs network base" --host-only initramfs-nfs-host-only.img
+----
+
+This will reduce the size of the initramfs image significantly.
+
+
+== Troubleshooting
+
+If the boot process does not succeed, you have several options to debug the
+situation. Some of the basic operations are covered here. For more information
+you should also visit:
+http://fedoraproject.org/wiki/How_to_debug_Dracut_problems
+
+
+[[identifying-your-problem-area]]
+=== Identifying your problem area
+. Remove ''rhgb'' and ''quiet'' from the kernel command line
+. Add ''rd.shell'' to the kernel command line. This will present a shell should
+dracut be unable to locate your root device
+. Add ''rd.shell rd.debug log_buf_len=1M'' to the kernel command line so that
+dracut shell commands are printed as they are executed
+. The file /run/initramfs/rdsosreport.txt is generated,
+which contains all the logs and the output of all significant tools, which are
+mentioned later.
+
+If you want to save that output, simply mount /boot by hand or insert an USB
+stick and mount that. Then you can store the output for later inspection.
+
+[[information-to-include-in-your-report]]
+=== Information to include in your report
+
+[[all-bug-reports]]
+==== All bug reports
+In all cases, the following should be mentioned and attached to your bug report:
+
+* The exact kernel command-line used. Typically from the bootloader
+configuration file (e.g. _/etc/grub.conf_) or from _/proc/cmdline_.
+* A copy of your disk partition information from _/etc/fstab_, which might be
+obtained booting an old working initramfs or a rescue medium.
+* Turn on dracut debugging (see _the 'debugging dracut' section_), and attach
+the file /run/initramfs/rdsosreport.txt.
+* If you use a dracut configuration file, please include _/etc/dracut.conf_ and
+all files in _/etc/dracut.conf.d/*.conf_
+
+[[network-root-device-related-problems]]
+==== Network root device related problems
+This section details information to include when experiencing problems on a
+system whose root device is located on a network attached volume (e.g. iSCSI,
+NFS or NBD). As well as the information from <<all-bug-reports>>, include the
+following information:
+
+
+* Please include the output of
++
+----
+# /sbin/ifup <interfacename>
+# ip addr show
+----
+
+[[debugging-dracut]]
+=== Debugging dracut
+
+
+[[configure-a-serial-console]]
+==== Configure a serial console
+
+Successfully debugging dracut will require some form of console
+logging during the system boot.  This section documents configuring a
+serial console connection to record boot messages.
+
+. First, enable serial console output for both the kernel and the bootloader.
+. Open the file _/etc/grub.conf_ for editing. Below the line ''timeout=5'', add
+the following:
++
+----
+serial --unit=0 --speed=9600
+terminal --timeout=5 serial console
+----
++
+. Also in _/etc/grub.conf_, add the following boot arguemnts to the ''kernel''
+line:
++
+----
+console=tty0 console=ttyS0,9600
+----
++
+. When finished, the _/etc/grub.conf_ file should look similar to the example
+below.
++
+----
+default=0
+timeout=5
+serial --unit=0 --speed=9600
+terminal --timeout=5 serial console
+title Fedora (2.6.29.5-191.fc11.x86_64)
+  root (hd0,0)
+  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 console=ttyS0,9600
+  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
+----
++
+. More detailed information on how to configure the kernel for console output
+can be found at
+http://www.faqs.org/docs/Linux-HOWTO/Remote-Serial-Console-HOWTO.html#CONFIGURE-KERNEL.
+. Redirecting non-interactive output
++
+--
+NOTE: You can redirect all non-interactive output to _/dev/kmsg_ and the kernel
+will put it out on the console when it reaches the kernel buffer by doing
+
+----
+# exec >/dev/kmsg 2>&1 </dev/console
+----
+--
+
+[[using-the-dracut-shell]]
+==== Using the dracut shell
+
+dracut offers a shell for interactive debugging in the event dracut fails to
+locate your root filesystem. To enable the shell:
+
+. Add the boot parameter ''rd.shell'' to your bootloader configuration file
+(e.g. _/etc/grub.conf_)
+. Remove the boot arguments ''rhgb'' and ''quiet''
++
+A sample _/etc/grub.conf_ bootloader configuration file is listed below.
++
+----
+default=0
+timeout=5
+serial --unit=0 --speed=9600
+terminal --timeout=5 serial console
+title Fedora (2.6.29.5-191.fc11.x86_64)
+  root (hd0,0)
+  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 rd.shell
+  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
+----
++
+. If system boot fails, you will be dropped into a shell as seen in the example
+below.
++
+----
+No root device found
+Dropping to debug shell.
+
+#
+----
++
+. Use this shell prompt to gather the information requested above
+(see <<all-bug-reports>>).
+
+[[accessing-the-root-volume-from-the-dracut-shell]]
+==== Accessing the root volume from the dracut shell
+From the dracut debug shell, you can manually perform the task of locating and
+preparing your root volume for boot. The required steps will depend on how your
+root volume is configured. Common scenarios include:
+
+* A block device (e.g. _/dev/sda7_)
+* A LVM logical volume (e.g. _/dev/VolGroup00/LogVol00_)
+* An encrypted device
+  (e.g. _/dev/mapper/luks-4d5972ea-901c-4584-bd75-1da802417d83_)
+* A network attached device
+  (e.g. _netroot=iscsi:@192.168.0.4::3260::iqn.2009-02.org.example:for.all_)
+
+The exact method for locating and preparing will vary. However, to continue with
+a successful boot, the objective is to locate your root volume and create a
+symlink _/dev/root_ which points to the file system. For example, the following
+example demonstrates accessing and booting a root volume that is an encrypted
+LVM Logical volume.
+
+. Inspect your partitions using parted
++
+----
+# parted /dev/sda -s p
+Model: ATA HTS541060G9AT00 (scsi)
+Disk /dev/sda: 60.0GB
+Sector size (logical/physical): 512B/512B
+Partition Table: msdos
+Number  Start   End     Size    Type      File system  Flags
+1      32.3kB  10.8GB  107MB   primary   ext4         boot
+2      10.8GB  55.6GB  44.7GB  logical                lvm
+----
++
+. You recall that your root volume was a LVM logical volume. Scan and activate
+any logical volumes.
++
+----
+# lvm vgscan
+# lvm vgchange -ay
+----
++
+. You should see any logical volumes now using the command blkid:
++
+----
+# blkid
+/dev/sda1: UUID="3de247f3-5de4-4a44-afc5-1fe179750cf7" TYPE="ext4"
+/dev/sda2: UUID="Ek4dQw-cOtq-5MJu-OGRF-xz5k-O2l8-wdDj0I" TYPE="LVM2_member"
+/dev/mapper/linux-root: UUID="def0269e-424b-4752-acf3-1077bf96ad2c" TYPE="crypto_LUKS"
+/dev/mapper/linux-home: UUID="c69127c1-f153-4ea2-b58e-4cbfa9257c5e" TYPE="ext3"
+/dev/mapper/linux-swap: UUID="47b4d329-975c-4c08-b218-f9c9bf3635f1" TYPE="swap"
+----
++
+. From the output above, you recall that your root volume exists on an encrypted
+block device. Following the guidance disk encryption guidance from the
+Installation Guide, you unlock your encrypted root volume.
++
+----
+# UUID=$(cryptsetup luksUUID /dev/mapper/linux-root)
+# cryptsetup luksOpen /dev/mapper/linux-root luks-$UUID
+Enter passphrase for /dev/mapper/linux-root:
+Key slot 0 unlocked.
+----
++
+. Next, make a symbolic link to the unlocked root volume
++
+----
+# ln -s /dev/mapper/luks-$UUID /dev/root
+----
++
+. With the root volume available, you may continue booting the system by exiting
+the dracut shell
++
+----
+# exit
+----
+
+[[additional-dracut-boot-parameters]]
+==== Additional dracut boot parameters
+For more debugging options, see *dracut.cmdline*(7).
+
+
+[[debugging-dracut-on-shutdown]]
+==== Debugging dracut on shutdown
+
+To debug the shutdown sequence on systemd systems, you can _rd.break_
+on _pre-shutdown_ or _shutdown_.
+
+To do this from an already booted system:
+----
+# mkdir -p /run/initramfs/etc/cmdline.d
+# echo "rd.break=pre-shutdown" > /run/initramfs/etc/cmdline.d/debug.conf
+# touch /run/initramfs/.need_shutdown
+----
+
+This will give you a dracut shell after the system pivot'ed back in the
+initramfs.
+

git2spec.pl

@@ -1,21 +1,5 @@
 #!/usr/bin/perl
 
-sub last_tag {
-    open( GIT, 'git log  --pretty=format:%H |');
-  LINE: while( <GIT> ) {
-      open( GIT2, "git tag --contains $_ |");
-      while( <GIT2> ) {
-	  chomp;
-	  last LINE if /..*/;
-      }
-      close GIT2;
-  }
-    $tag=$_;
-    close GIT2;
-    close GIT;         # be done
-    return $tag;
-};
-
 sub create_patches {
     my $tag=shift;
     my $pdir=shift;
@@ -31,7 +15,8 @@ my $datestr = strftime "%Y%m%d", gmtime;
 
 my $tag=shift;
 my $pdir=shift;
-$tag=&last_tag if not defined $tag;
+$tag=`git describe --abbrev=0 --tags` if not defined $tag;
+chomp($tag);
 my @patches=&create_patches($tag, $pdir);
 my $num=$#patches + 2;
 $tag=~s/[^0-9]+?([0-9]+)/$1/;

install/dracut-install.c

@@ -44,6 +44,7 @@
 #include "log.h"
 #include "hashmap.h"
 #include "util.h"
+#include "strv.h"
 
 static bool arg_hmac = false;
 static bool arg_createdir = false;
@@ -62,9 +63,13 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
 static size_t dir_len(char const *file)
 {
         size_t length;
+
+        if (!file)
+                return 0;
+
         /* Strip the basename and any redundant slashes before it.  */
-        for (length = strlen(file); 0 < length; length--)
-                if (file[length] == '/')
+        for (length = strlen(file) - 1; 0 < length; length--)
+                if (file[length] == '/' && file[length - 1] != '/')
                         break;
         return length;
 }
@@ -73,27 +78,38 @@ static char *convert_abs_rel(const char *from, const char *target)
 {
         /* we use the 4*MAXPATHLEN, which should not overrun */
         char relative_from[MAXPATHLEN * 4];
-        char *realtarget = NULL;
-        char *p, *q;
+        _cleanup_free_ char *realtarget = NULL;
+        _cleanup_free_ char *target_dir_p = NULL, *realpath_p = NULL;
         const char *realfrom = from;
-        int level = 0, fromlevel = 0, targetlevel = 0;
-        int l, i, rl;
-        int dirlen;
+        size_t level = 0, fromlevel = 0, targetlevel = 0;
+        int l;
+        size_t i, rl, dirlen;
+        int ret;
 
-        p = strdup(target);
-        dirlen = dir_len(p);
-        p[dirlen] = '\0';
-        q = realpath(p, NULL);
+        target_dir_p = strdup(target);
+        if (!target_dir_p)
+                return strdup(from);
 
-        if (q == NULL) {
-                free(p);
+        dirlen = dir_len(target_dir_p);
+        target_dir_p[dirlen] = '\0';
+        realpath_p = realpath(target_dir_p, NULL);
+
+        if (realpath_p == NULL) {
                 log_warning("convert_abs_rel(): target '%s' directory has no realpath.", target);
                 return strdup(from);
         }
 
-        asprintf(&realtarget, "%s/%s", q, &p[dirlen + 1]);
-        free(p);
-        free(q);
+        /* dir_len() skips double /'s e.g. //lib64, so we can't skip just one
+         * character - need to skip all leading /'s */
+        rl = strlen(target);
+        for (i = dirlen + 1; i < rl; ++i)
+                if (target_dir_p[i] != '/')
+                        break;
+        ret = asprintf(&realtarget, "%s/%s", realpath_p, &target_dir_p[i]);
+        if (ret < 0) {
+                log_error("Out of memory!");
+                exit(EXIT_FAILURE);
+        }
 
         /* now calculate the relative path from <from> to <target> and
            store it in <relative_from>
@@ -116,8 +132,6 @@ static char *convert_abs_rel(const char *from, const char *target)
                 if (realtarget[i] == '/')
                         level++;
 
-        free(realtarget);
-
         /* add "../" to the relative_from path, until the common pathname is
            reached */
         for (i = level; i < targetlevel; i++) {
@@ -149,18 +163,16 @@ static char *convert_abs_rel(const char *from, const char *target)
 static int ln_r(const char *src, const char *dst)
 {
         int ret;
-        const char *points_to = convert_abs_rel(src, dst);
+        _cleanup_free_ const char *points_to = convert_abs_rel(src, dst);
+
         log_info("ln -s '%s' '%s'", points_to, dst);
         ret = symlink(points_to, dst);
 
         if (ret != 0) {
                 log_error("ERROR: ln -s '%s' '%s': %m", points_to, dst);
-                free((char *)points_to);
                 return 1;
         }
 
-        free((char *)points_to);
-
         return 0;
 }
 
@@ -180,11 +192,11 @@ static bool use_clone = true;
 static int cp(const char *src, const char *dst)
 {
         int pid;
-        int ret;
+        int ret = 0;
 
         if (use_clone) {
                 struct stat sb;
-                int dest_desc, source_desc;
+                _cleanup_close_ int dest_desc = -1, source_desc = -1;
 
                 if (lstat(src, &sb) != 0)
                         goto normal_copy;
@@ -201,20 +213,24 @@ static int cp(const char *src, const char *dst)
                          (sb.st_mode) & (S_ISUID | S_ISGID | S_ISVTX | S_IRWXU | S_IRWXG | S_IRWXO));
 
                 if (dest_desc < 0) {
-                        close(source_desc);
                         goto normal_copy;
                 }
 
                 ret = clone_file(dest_desc, source_desc);
-                close(source_desc);
+
                 if (ret == 0) {
+                        struct timeval tv[2];
                         if (fchown(dest_desc, sb.st_uid, sb.st_gid) != 0)
-                                fchown(dest_desc, -1, sb.st_gid);
-                        close(dest_desc);
+                                fchown(dest_desc, (__uid_t) - 1, sb.st_gid);
+                        tv[0].tv_sec = sb.st_atime;
+                        tv[0].tv_usec = 0;
+                        tv[1].tv_sec = sb.st_mtime;
+                        tv[1].tv_usec = 0;
+                        futimes(dest_desc, tv);
                         return ret;
                 }
                 close(dest_desc);
-
+                dest_desc = -1;
                 /* clone did not work, remove the file */
                 unlink(dst);
                 /* do not try clone again */
@@ -224,16 +240,85 @@ static int cp(const char *src, const char *dst)
  normal_copy:
         pid = fork();
         if (pid == 0) {
-                execlp("cp", "cp", "--reflink=auto", "--sparse=auto", "--preserve=mode", "-fL", src, dst, NULL);
+                execlp("cp", "cp", "--reflink=auto", "--sparse=auto", "--preserve=mode,timestamps", "-fL", src, dst,
+                       NULL);
                 _exit(EXIT_FAILURE);
         }
 
         while (waitpid(pid, &ret, 0) < 0) {
                 if (errno != EINTR) {
                         ret = -1;
+                        log_error("Failed: cp --reflink=auto --sparse=auto --preserve=mode,timestamps -fL %s %s", src,
+                                  dst);
                         break;
                 }
         }
+        log_debug("cp ret = %d", ret);
+        return ret;
+}
+
+static int library_install(const char *src, const char *lib)
+{
+        _cleanup_free_ char *p = NULL;
+        _cleanup_free_ char *pdir = NULL, *ppdir = NULL, *clib = NULL;
+        char *q;
+        int r, ret = 0;
+
+        p = strdup(lib);
+
+        r = dracut_install(p, p, false, false, true);
+        if (r != 0)
+                log_error("ERROR: failed to install '%s' for '%s'", p, src);
+        else
+                log_debug("Lib install: '%s'", p);
+        ret += r;
+
+        /* also install lib.so for lib.so.* files */
+        q = strstr(p, ".so.");
+        if (q) {
+                q[3] = '\0';
+
+                /* ignore errors for base lib symlink */
+                if (dracut_install(p, p, false, false, true) == 0)
+                        log_debug("Lib install: '%s'", p);
+        }
+
+        /* Also try to install the same library from one directory above.
+           This fixes the case, where only the HWCAP lib would be installed
+           # ldconfig -p|fgrep libc.so
+           libc.so.6 (libc6,64bit, hwcap: 0x0000001000000000, OS ABI: Linux 2.6.32) => /lib64/power6/libc.so.6
+           libc.so.6 (libc6,64bit, hwcap: 0x0000000000000200, OS ABI: Linux 2.6.32) => /lib64/power6x/libc.so.6
+           libc.so.6 (libc6,64bit, OS ABI: Linux 2.6.32) => /lib64/libc.so.6
+         */
+
+        free(p);
+        p = strdup(lib);
+
+        pdir = dirname(p);
+        if (!pdir)
+                return ret;
+
+        pdir = strdup(pdir);
+        ppdir = dirname(pdir);
+        if (!ppdir)
+                return ret;
+
+        ppdir = strdup(ppdir);
+
+        strcpy(p, lib);
+
+        clib = strjoin(ppdir, "/", basename(p), NULL);
+        if (dracut_install(clib, clib, false, false, true) == 0)
+                log_debug("Lib install: '%s'", clib);
+        /* also install lib.so for lib.so.* files */
+        q = strstr(clib, ".so.");
+        if (q) {
+                q[3] = '\0';
+
+                /* ignore errors for base lib symlink */
+                if (dracut_install(clib, clib, false, false, true) == 0)
+                        log_debug("Lib install: '%s'", p);
+        }
 
         return ret;
 }
@@ -242,17 +327,19 @@ static int resolve_deps(const char *src)
 {
         int ret = 0;
 
-        char *buf = malloc(LINE_MAX);
+        _cleanup_free_ char *buf = malloc(LINE_MAX);
         size_t linesize = LINE_MAX;
-        FILE *fptr;
-        char *cmd;
+        _cleanup_pclose_ FILE *fptr = NULL;
+        _cleanup_free_ char *cmd = NULL;
 
         if (strstr(src, ".so") == 0) {
-                int fd;
+                _cleanup_close_ int fd = -1;
                 fd = open(src, O_RDONLY | O_CLOEXEC);
+                if (fd < 0)
+                        return -errno;
+
                 read(fd, buf, LINE_MAX);
                 buf[LINE_MAX - 1] = '\0';
-                close(fd);
                 if (buf[0] == '#' && buf[1] == '!') {
                         /* we have a shebang */
                         char *p, *q;
@@ -268,7 +355,14 @@ static int resolve_deps(const char *src)
         }
 
         /* run ldd */
-        asprintf(&cmd, "ldd %s 2>&1", src);
+        ret = asprintf(&cmd, "ldd %s 2>&1", src);
+        if (ret < 0) {
+                log_error("Out of memory!");
+                exit(EXIT_FAILURE);
+        }
+
+        ret = 0;
+
         fptr = popen(cmd, "r");
 
         while (!feof(fptr)) {
@@ -279,75 +373,109 @@ static int resolve_deps(const char *src)
 
                 log_debug("ldd: '%s'", buf);
 
+                if (strstr(buf, "you do not have execution permission")) {
+                        log_error("%s", buf);
+                        ret += 1;
+                        break;
+                }
+
                 if (strstr(buf, "not a dynamic executable"))
                         break;
 
                 if (strstr(buf, "loader cannot load itself"))
                         break;
 
-                p = strstr(buf, "/");
+                if (strstr(buf, "not regular file"))
+                        break;
+
+                if (strstr(buf, "cannot read header"))
+                        break;
+
+                if (strstr(buf, destrootdir))
+                        break;
+
+                p = strstr(buf, "=>");
+                if (!p)
+                        p = buf;
+
+                p = strchr(p, '/');
                 if (p) {
-                        int r;
                         for (q = p; *q && *q != ' ' && *q != '\n'; q++) ;
                         *q = '\0';
-                        r = dracut_install(p, p, false, false, true);
-                        if (r != 0)
-                                log_error("ERROR: failed to install '%s' for '%s'", p, src);
-                        else
-                                log_debug("Lib install: '%s'", p);
-                        ret += r;
 
-                        /* also install lib.so for lib.so.* files */
-                        q = strstr(p, ".so.");
-                        if (q) {
-                                q += 3;
-                                *q = '\0';
+                        ret += library_install(src, p);
 
-                                /* ignore errors for base lib symlink */
-                                if (dracut_install(p, p, false, false, true) == 0)
-                                        log_debug("Lib install: '%s'", p);
-                        }
                 }
         }
-        pclose(fptr);
 
         return ret;
 }
 
 /* Install ".<filename>.hmac" file for FIPS self-checks */
-static int hmac_install(const char *src, const char *dst)
+static int hmac_install(const char *src, const char *dst, const char *hmacpath)
 {
-        char *srcpath = strdup(src);
-        char *dstpath = strdup(dst);
-        char *srchmacname = NULL;
-        char *dsthmacname = NULL;
+        _cleanup_free_ char *srcpath = strdup(src);
+        _cleanup_free_ char *dstpath = strdup(dst);
+        _cleanup_free_ char *srchmacname = NULL;
+        _cleanup_free_ char *dsthmacname = NULL;
+        int ret;
+
+        if (!(srcpath && dstpath))
+                return -ENOMEM;
+
         size_t dlen = dir_len(src);
 
         if (endswith(src, ".hmac"))
                 return 0;
 
+        if (!hmacpath) {
+                hmac_install(src, dst, "/lib/fipscheck");
+                hmac_install(src, dst, "/lib64/fipscheck");
+                hmac_install(src, dst, "/lib/hmaccalc");
+                hmac_install(src, dst, "/lib64/hmaccalc");
+        }
+
         srcpath[dlen] = '\0';
         dstpath[dir_len(dst)] = '\0';
-        asprintf(&srchmacname, "%s/.%s.hmac", srcpath, &src[dlen + 1]);
-        asprintf(&dsthmacname, "%s/.%s.hmac", dstpath, &src[dlen + 1]);
+        if (hmacpath) {
+                ret = asprintf(&srchmacname, "%s/%s.hmac", hmacpath, &src[dlen + 1]);
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
+
+                ret = asprintf(&dsthmacname, "%s/%s.hmac", hmacpath, &src[dlen + 1]);
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
+        } else {
+                ret = asprintf(&srchmacname, "%s/.%s.hmac", srcpath, &src[dlen + 1]);
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
+
+                ret = asprintf(&dsthmacname, "%s/.%s.hmac", dstpath, &src[dlen + 1]);
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
+        }
         log_debug("hmac cp '%s' '%s')", srchmacname, dsthmacname);
         dracut_install(srchmacname, dsthmacname, false, false, true);
-        free(dsthmacname);
-        free(srchmacname);
-        free(srcpath);
-        free(dstpath);
         return 0;
 }
 
 static int dracut_install(const char *src, const char *dst, bool isdir, bool resolvedeps, bool hashdst)
 {
         struct stat sb, db;
-        char *dname = NULL;
-        char *fulldstpath = NULL;
-        char *fulldstdir = NULL;
+        _cleanup_free_ char *fulldstpath = NULL;
+        _cleanup_free_ char *fulldstdir = NULL;
         int ret;
         bool src_exists = true;
-        char *i, *existing;
+        char *i = NULL;
+        char *existing;
 
         log_debug("dracut_install('%s', '%s')", src, dst);
 
@@ -380,9 +508,16 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
         }
 
         i = strdup(dst);
+        if (!i)
+                return -ENOMEM;
+
         hashmap_put(items, i, i);
 
-        asprintf(&fulldstpath, "%s%s", destrootdir, dst);
+        ret = asprintf(&fulldstpath, "%s%s", destrootdir, dst);
+        if (ret < 0) {
+                log_error("Out of memory!");
+                exit(EXIT_FAILURE);
+        }
 
         ret = stat(fulldstpath, &sb);
 
@@ -392,10 +527,14 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
         }
 
         if (ret == 0) {
-                log_debug("'%s' already exists", fulldstpath);
-                free(fulldstpath);
+                if (resolvedeps && S_ISREG(sb.st_mode) && (sb.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) {
+                        log_debug("'%s' already exists, but checking for any deps", fulldstpath);
+                        ret = resolve_deps(src);
+                } else
+                        log_debug("'%s' already exists", fulldstpath);
+
                 /* dst does already exist */
-                return 0;
+                return ret;
         }
 
         /* check destination directory */
@@ -405,6 +544,8 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
         ret = stat(fulldstdir, &db);
 
         if (ret < 0) {
+                _cleanup_free_ char *dname = NULL;
+
                 if (errno != ENOENT) {
                         log_error("ERROR: stat '%s': %m", fulldstdir);
                         return 1;
@@ -412,35 +553,34 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
                 /* create destination directory */
                 log_debug("dest dir '%s' does not exist", fulldstdir);
                 dname = strdup(dst);
+                if (!dname)
+                        return 1;
+
                 dname[dir_len(dname)] = '\0';
                 ret = dracut_install(dname, dname, true, false, true);
 
-                free(dname);
-
                 if (ret != 0) {
                         log_error("ERROR: failed to create directory '%s'", fulldstdir);
-                        free(fulldstdir);
                         return 1;
                 }
         }
 
-        free(fulldstdir);
-
         if (isdir && !src_exists) {
                 log_info("mkdir '%s'", fulldstpath);
-                return mkdir(fulldstpath, 0755);
+                ret = mkdir(fulldstpath, 0755);
+                return ret;
         }
 
         /* ready to install src */
 
         if (S_ISDIR(sb.st_mode)) {
                 log_info("mkdir '%s'", fulldstpath);
-                return mkdir(fulldstpath, sb.st_mode | S_IWUSR);
+                ret = mkdir(fulldstpath, sb.st_mode | S_IWUSR);
+                return ret;
         }
 
         if (S_ISLNK(sb.st_mode)) {
-                char *abspath;
-                char *absdestpath = NULL;
+                _cleanup_free_ char *abspath = NULL;
 
                 abspath = realpath(src, NULL);
 
@@ -458,18 +598,20 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
                 }
 
                 if (lstat(fulldstpath, &sb) != 0) {
+                        _cleanup_free_ char *absdestpath = NULL;
 
-                        asprintf(&absdestpath, "%s%s", destrootdir, abspath);
+                        ret = asprintf(&absdestpath, "%s%s", destrootdir, abspath);
+                        if (ret < 0) {
+                                log_error("Out of memory!");
+                                exit(EXIT_FAILURE);
+                        }
 
                         ln_r(absdestpath, fulldstpath);
-
-                        free(absdestpath);
                 }
 
-                free(abspath);
                 if (arg_hmac) {
                         /* copy .hmac files also */
-                        hmac_install(src, dst);
+                        hmac_install(src, dst, NULL);
                 }
 
                 return 0;
@@ -480,12 +622,16 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
                         ret += resolve_deps(src);
                 if (arg_hmac) {
                         /* copy .hmac files also */
-                        hmac_install(src, dst);
+                        hmac_install(src, dst, NULL);
                 }
         }
 
+        log_debug("dracut_install ret = %d", ret);
         log_info("cp '%s' '%s'", src, fulldstpath);
         ret += cp(src, fulldstpath);
+
+        log_debug("dracut_install ret = %d", ret);
+
         return ret;
 }
 
@@ -498,46 +644,47 @@ static void item_free(char *i)
 static void usage(int status)
 {
         /*                                                                     */
-        printf("\
-Usage: %s -D DESTROOTDIR [OPTION]... -a SOURCE...\n\
-   or: %s -D DESTROOTDIR [OPTION]... SOURCE DEST\n\
-\n\
-Install SOURCE to DEST in DESTROOTDIR with all needed dependencies.\n\
-\n\
-  -D --destrootdir    Install all files to DESTROOTDIR as the root\n\
-  -a --all            Install all SOURCE arguments to DESTROOTDIR\n\
-  -o --optional       If SOURCE does not exist, do not fail\n\
-  -d --dir            SOURCE is a directory\n\
-  -l --ldd            Also install shebang executables and libraries\n\
-  -R --resolvelazy    Only install shebang executables and libraries for all SOURCE files\n\
-  -f --fips           Also install all '.SOURCE.hmac' files\n\
-  -v --verbose        Show more output\n\
-     --debug          Show debug output\n\
-     --version        Show package version\n\
-  -h --help           Show this help\n\
-\n\
-Example:\n\
-# %s -D /var/tmp/test-root --ldd -a sh tr\n\
-# tree /var/tmp/test-root\n\
-/var/tmp/test-root\n\
-|-- lib64 -> usr/lib64\n\
-`-- usr\n\
-    |-- bin\n\
-    |   |-- bash\n\
-    |   |-- sh -> bash\n\
-    |   `-- tr\n\
-    `-- lib64\n\
-        |-- ld-2.15.90.so\n\
-        |-- ld-linux-x86-64.so.2 -> ld-2.15.90.so\n\
-        |-- libc-2.15.90.so\n\
-        |-- libc.so\n\
-        |-- libc.so.6 -> libc-2.15.90.so\n\
-        |-- libdl-2.15.90.so\n\
-        |-- libdl.so -> libdl-2.15.90.so\n\
-        |-- libdl.so.2 -> libdl-2.15.90.so\n\
-        |-- libtinfo.so.5 -> libtinfo.so.5.9\n\
-        `-- libtinfo.so.5.9\n\
-", program_invocation_short_name, program_invocation_short_name, program_invocation_short_name);
+        printf("Usage: %s -D DESTROOTDIR [OPTION]... -a SOURCE...\n"
+               "or: %s -D DESTROOTDIR [OPTION]... SOURCE DEST\n"
+               "\n"
+               "Install SOURCE to DEST in DESTROOTDIR with all needed dependencies.\n"
+               "\n"
+               "  -D --destrootdir    Install all files to DESTROOTDIR as the root\n"
+               "  -a --all            Install all SOURCE arguments to DESTROOTDIR\n"
+               "  -o --optional       If SOURCE does not exist, do not fail\n"
+               "  -d --dir            SOURCE is a directory\n"
+               "  -l --ldd            Also install shebang executables and libraries\n"
+               "  -R --resolvelazy    Only install shebang executables and libraries\n"
+               "                      for all SOURCE files\n"
+               "  -H --fips           Also install all '.SOURCE.hmac' files\n"
+               "  -v --verbose        Show more output\n"
+               "     --debug          Show debug output\n"
+               "     --version        Show package version\n"
+               "  -h --help           Show this help\n"
+               "\n"
+               "Example:\n"
+               "# mkdir -p /var/tmp/test-root\n"
+               "# %s -D /var/tmp/test-root --ldd -a sh tr\n"
+               "# tree /var/tmp/test-root\n"
+               "/var/tmp/test-root\n"
+               "|-- lib64 -> usr/lib64\n"
+               "`-- usr\n"
+               "    |-- bin\n"
+               "    |   |-- bash\n"
+               "    |   |-- sh -> bash\n"
+               "    |   `-- tr\n"
+               "    `-- lib64\n"
+               "        |-- ld-2.15.90.so\n"
+               "        |-- ld-linux-x86-64.so.2 -> ld-2.15.90.so\n"
+               "        |-- libc-2.15.90.so\n"
+               "        |-- libc.so\n"
+               "        |-- libc.so.6 -> libc-2.15.90.so\n"
+               "        |-- libdl-2.15.90.so\n"
+               "        |-- libdl.so -> libdl-2.15.90.so\n"
+               "        |-- libdl.so.2 -> libdl-2.15.90.so\n"
+               "        |-- libtinfo.so.5 -> libtinfo.so.5.9\n"
+               "        `-- libtinfo.so.5.9\n", program_invocation_short_name, program_invocation_short_name,
+               program_invocation_short_name);
         exit(status);
 }
 
@@ -550,7 +697,7 @@ static int parse_argv(int argc, char *argv[])
                 ARG_DEBUG
         };
 
-        static const struct option const options[] = {
+        static struct option const options[] = {
                 {"help", no_argument, NULL, 'h'},
                 {"version", no_argument, NULL, ARG_VERSION},
                 {"dir", no_argument, NULL, 'd'},
@@ -565,7 +712,7 @@ static int parse_argv(int argc, char *argv[])
                 {NULL, 0, NULL, 0}
         };
 
-        while ((c = getopt_long(argc, argv, "adhloD:DHILR", options, NULL)) != -1) {
+        while ((c = getopt_long(argc, argv, "adhloD:HR", options, NULL)) != -1) {
                 switch (c) {
                 case ARG_VERSION:
                         puts(PROGRAM_VERSION_STRING);
@@ -616,7 +763,7 @@ static int parse_argv(int argc, char *argv[])
 static int resolve_lazy(int argc, char **argv)
 {
         int i;
-        int destrootdirlen = strlen(destrootdir);
+        size_t destrootdirlen = strlen(destrootdir);
         int ret = 0;
         char *item;
         for (i = 0; i < argc; i++) {
@@ -644,63 +791,116 @@ static int resolve_lazy(int argc, char **argv)
         return ret;
 }
 
+static char **find_binary(const char *src)
+{
+        char *path = NULL;
+        _cleanup_strv_free_ char **p = NULL;
+        char **ret = NULL;
+        char **q;
+        char *newsrc = NULL;
+
+        path = getenv("PATH");
+
+        if (path == NULL) {
+                log_error("PATH is not set");
+                exit(EXIT_FAILURE);
+        }
+
+        log_debug("PATH=%s", path);
+
+        p = strv_split(path, ":");
+
+        STRV_FOREACH(q, p) {
+                struct stat sb;
+                int r;
+
+                r = asprintf(&newsrc, "%s/%s", *q, src);
+                if (r < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
+
+                if (stat(newsrc, &sb) != 0) {
+                        log_debug("stat(%s) != 0", newsrc);
+                        free(newsrc);
+                        newsrc = NULL;
+                        continue;
+                }
+
+                strv_push(&ret, newsrc);
+
+        };
+
+        if (ret) {
+                STRV_FOREACH(q, ret) {
+                        log_debug("find_binary(%s) == %s", src, *q);
+                }
+        }
+
+        return ret;
+}
+
+static int install_one(const char *src, const char *dst)
+{
+        int r = EXIT_SUCCESS;
+        int ret = 0;
+
+        if (strchr(src, '/') == NULL) {
+                char **q = NULL;
+                char **p = find_binary(src);
+                if (p) {
+                        STRV_FOREACH(q, p) {
+                                char *newsrc = *q;
+                                log_debug("dracut_install '%s' '%s'", newsrc, dst);
+                                ret = dracut_install(newsrc, dst, arg_createdir, arg_resolvedeps, true);
+                                if (ret == 0) {
+                                        log_debug("dracut_install '%s' '%s' OK", newsrc, dst);
+                                }
+                        }
+                        strv_free(p);
+                } else {
+                        ret = -1;
+                }
+        } else {
+                ret = dracut_install(src, dst, arg_createdir, arg_resolvedeps, true);
+        }
+
+        if ((ret != 0) && (!arg_optional)) {
+                log_error("ERROR: installing '%s' to '%s'", src, dst);
+                r = EXIT_FAILURE;
+        }
+
+        return r;
+}
+
 static int install_all(int argc, char **argv)
 {
-        int r = 0;
+        int r = EXIT_SUCCESS;
         int i;
         for (i = 0; i < argc; i++) {
-                int ret;
+                int ret = 0;
                 log_debug("Handle '%s'", argv[i]);
 
                 if (strchr(argv[i], '/') == NULL) {
-                        char *path;
-                        char *p, *q;
-                        bool end = false;
-                        path = getenv("PATH");
-                        if (path == NULL) {
-                                log_error("PATH is not set");
-                                exit(EXIT_FAILURE);
+                        char **q = NULL;
+                        char **p = find_binary(argv[i]);
+                        if (p) {
+                                STRV_FOREACH(q, p) {
+                                        char *newsrc = *q;
+                                        log_debug("dracut_install '%s'", newsrc);
+                                        ret = dracut_install(newsrc, newsrc, arg_createdir, arg_resolvedeps, true);
+                                        if (ret == 0) {
+                                                log_debug("dracut_install '%s' OK", newsrc);
+                                        }
+                                }
+                                strv_free(p);
+                        } else {
+                                ret = -1;
                         }
-                        path = strdup(path);
-                        p = path;
-                        log_debug("PATH=%s", path);
-                        do {
-                                char *newsrc = NULL;
-                                char *dest;
-                                struct stat sb;
 
-                                for (q = p; *q && *q != ':'; q++) ;
-
-                                if (*q == '\0')
-                                        end = true;
-                                else
-                                        *q = '\0';
-
-                                asprintf(&newsrc, "%s/%s", p, argv[i]);
-                                p = q + 1;
-
-                                if (stat(newsrc, &sb) != 0) {
-                                        free(newsrc);
-                                        ret = -1;
-                                        continue;
-                                }
-
-                                dest = strdup(newsrc);
-
-                                log_debug("dracut_install '%s'", newsrc);
-                                ret = dracut_install(newsrc, dest, arg_createdir, arg_resolvedeps, true);
-                                if (ret == 0) {
-                                        end = true;
-                                        log_debug("dracut_install '%s' OK", newsrc);
-                                }
-                                free(newsrc);
-                                free(dest);
-                        } while (!end);
-                        free(path);
                 } else {
-                        char *dest = strdup(argv[i]);
+                        _cleanup_free_ char *dest = strdup(argv[i]);
                         ret = dracut_install(argv[i], dest, arg_createdir, arg_resolvedeps, true);
-                        free(dest);
                 }
 
                 if ((ret != 0) && (!arg_optional)) {
@@ -742,9 +942,17 @@ int main(int argc, char **argv)
         if (strcmp(destrootdir, "/") == 0) {
                 log_error("Environment DESTROOTDIR or argument -D is set to '/'!");
                 usage(EXIT_FAILURE);
-
         }
 
+        i = destrootdir;
+        destrootdir = realpath(destrootdir, NULL);
+        if (!destrootdir) {
+                log_error("Environment DESTROOTDIR or argument -D is set to '%s': %m", i);
+                r = EXIT_FAILURE;
+                goto finish;
+        }
+        free(i);
+
         items = hashmap_new(string_hash_func, string_compare_func);
         items_failed = hashmap_new(string_hash_func, string_compare_func);
 
@@ -775,11 +983,7 @@ int main(int argc, char **argv)
                 r = install_all(argc - optind, &argv[optind]);
         } else {
                 /* simple "inst src dst" */
-                r = dracut_install(argv[optind], argv[optind + 1], arg_createdir, arg_resolvedeps, true);
-                if ((r != 0) && (!arg_optional)) {
-                        log_error("ERROR: installing '%s' to '%s'", argv[optind], argv[optind + 1]);
-                        r = EXIT_FAILURE;
-                }
+                r = install_one(argv[optind], argv[optind + 1]);
         }
 
         if (arg_optional)

install/macro.h

@@ -1,7 +1,6 @@
 /*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
 
-#ifndef foomacrohfoo
-#define foomacrohfoo
+#pragma once
 
 /***
   This file is part of systemd.
@@ -45,16 +44,38 @@
 #define _hidden_ __attribute__ ((visibility("hidden")))
 #define _weakref_(x) __attribute__((weakref(#x)))
 #define _introspect_(x) __attribute__((section("introspect." x)))
+#define _alignas_(x) __attribute__((aligned(__alignof(x))))
+#define _cleanup_(x) __attribute__((cleanup(x)))
+
+/* automake test harness */
+#define EXIT_TEST_SKIP 77
 
 #define XSTRINGIFY(x) #x
 #define STRINGIFY(x) XSTRINGIFY(x)
 
 /* Rounds up */
-#define ALIGN(l) ALIGN_TO((l), sizeof(void*))
+
+#define ALIGN4(l) (((l) + 3) & ~3)
+#define ALIGN8(l) (((l) + 7) & ~7)
+
+#if __SIZEOF_POINTER__ == 8
+#define ALIGN(l) ALIGN8(l)
+#elif __SIZEOF_POINTER__ == 4
+#define ALIGN(l) ALIGN4(l)
+#else
+#error "Wut? Pointers are neither 4 nor 8 bytes long?"
+#endif
+
+#define ALIGN_PTR(p) ((void*) ALIGN((unsigned long) p))
+#define ALIGN4_PTR(p) ((void*) ALIGN4((unsigned long) p))
+#define ALIGN8_PTR(p) ((void*) ALIGN8((unsigned long) p))
+
 static inline size_t ALIGN_TO(size_t l, size_t ali) {
         return ((l + ali - 1) & ~(ali - 1));
 }
 
+#define ALIGN_TO_PTR(p, ali) ((void*) ALIGN_TO((unsigned long) p))
+
 #define ELEMENTSOF(x) (sizeof(x)/sizeof((x)[0]))
 
 /*
@@ -64,34 +85,35 @@ static inline size_t ALIGN_TO(size_t l, size_t ali) {
  * @member: the name of the member within the struct.
  *
  */
-#define container_of(ptr, type, member) ({ \
-        const typeof( ((type *)0)->member ) *__mptr = (ptr); \
-        (type *)( (char *)__mptr - offsetof(type,member) );})
-
-#ifndef MAX
-#define MAX(a,b)                                \
-        __extension__ ({                        \
-                        typeof(a) _a = (a);     \
-                        typeof(b) _b = (b);     \
-                        _a > _b ? _a : _b;      \
+#define container_of(ptr, type, member)                                 \
+        __extension__ ({                                                \
+                        const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+                        (type *)( (char *)__mptr - offsetof(type,member) ); \
                 })
-#endif
 
-#define MAX3(a,b,c)                             \
-        MAX(MAX(a,b),c)
+#undef MAX
+#define MAX(a,b)                                 \
+        __extension__ ({                         \
+                        typeof(a) _a = (a);      \
+                        typeof(b) _b = (b);      \
+                        _a > _b ? _a : _b;       \
+                })
 
-#ifndef MIN
+#define MAX3(x,y,z)                              \
+        __extension__ ({                         \
+                        typeof(x) _c = MAX(x,y); \
+                        MAX(_c, z);              \
+                })
+
+#undef MIN
 #define MIN(a,b)                                \
         __extension__ ({                        \
                         typeof(a) _a = (a);     \
                         typeof(b) _b = (b);     \
                         _a < _b ? _a : _b;      \
                 })
-#endif
-
-#define MIN3(a,b,c)                             \
-        MIN(MIN(a,b),c)
 
+#ifndef CLAMP
 #define CLAMP(x, low, high)                                             \
         __extension__ ({                                                \
                         typeof(x) _x = (x);                             \
@@ -99,6 +121,7 @@ static inline size_t ALIGN_TO(size_t l, size_t ali) {
                         typeof(high) _high = (high);                    \
                         ((_x > _high) ? _high : ((_x < _low) ? _low : _x)); \
                 })
+#endif
 
 #define assert_se(expr)                                                 \
         do {                                                            \
@@ -119,14 +142,21 @@ static inline size_t ALIGN_TO(size_t l, size_t ali) {
                 log_assert_failed_unreachable(t, __FILE__, __LINE__, __PRETTY_FUNCTION__); \
         } while (false)
 
-#define assert_cc(expr)                            \
-        do {                                       \
-                switch (0) {                       \
-                        case 0:                    \
-                        case !!(expr):             \
-                                ;                  \
-                }                                  \
+#if defined(static_assert)
+#define assert_cc(expr)                         \
+        do {                                    \
+                static_assert(expr, #expr);     \
         } while (false)
+#else
+#define assert_cc(expr)                         \
+        do {                                    \
+                switch (0) {                    \
+                case 0:                         \
+                case !!(expr):                  \
+                        ;                       \
+                }                               \
+        } while (false)
+#endif
 
 #define PTR_TO_UINT(p) ((unsigned int) ((uintptr_t) (p)))
 #define UINT_TO_PTR(u) ((void*) ((uintptr_t) (u)))
@@ -149,6 +179,8 @@ static inline size_t ALIGN_TO(size_t l, size_t ali) {
 #define memzero(x,l) (memset((x), 0, (l)))
 #define zero(x) (memzero(&(x), sizeof(x)))
 
+#define CHAR_TO_STR(x) ((char[2]) { x, 0 })
+
 #define char_array_0(x) x[sizeof(x)-1] = 0;
 
 #define IOVEC_SET_STRING(i, s)                  \
@@ -187,6 +219,66 @@ static inline size_t IOVEC_INCREMENT(struct iovec *i, unsigned n, size_t k) {
         return k;
 }
 
-#include "log.h"
+#define VA_FORMAT_ADVANCE(format, ap)                                   \
+do {                                                                    \
+        int _argtypes[128];                                             \
+        size_t _i, _k;                                                  \
+        _k = parse_printf_format((format), ELEMENTSOF(_argtypes), _argtypes); \
+        assert(_k < ELEMENTSOF(_argtypes));                             \
+        for (_i = 0; _i < _k; _i++) {                                   \
+                if (_argtypes[_i] & PA_FLAG_PTR)  {                     \
+                        (void) va_arg(ap, void*);                       \
+                        continue;                                       \
+                }                                                       \
+                                                                        \
+                switch (_argtypes[_i]) {                                \
+                case PA_INT:                                            \
+                case PA_INT|PA_FLAG_SHORT:                              \
+                case PA_CHAR:                                           \
+                        (void) va_arg(ap, int);                         \
+                        break;                                          \
+                case PA_INT|PA_FLAG_LONG:                               \
+                        (void) va_arg(ap, long int);                    \
+                        break;                                          \
+                case PA_INT|PA_FLAG_LONG_LONG:                          \
+                        (void) va_arg(ap, long long int);               \
+                        break;                                          \
+                case PA_WCHAR:                                          \
+                        (void) va_arg(ap, wchar_t);                     \
+                        break;                                          \
+                case PA_WSTRING:                                        \
+                case PA_STRING:                                         \
+                case PA_POINTER:                                        \
+                        (void) va_arg(ap, void*);                       \
+                        break;                                          \
+                case PA_FLOAT:                                          \
+                case PA_DOUBLE:                                         \
+                        (void) va_arg(ap, double);                      \
+                        break;                                          \
+                case PA_DOUBLE|PA_FLAG_LONG_DOUBLE:                     \
+                        (void) va_arg(ap, long double);                 \
+                        break;                                          \
+                default:                                                \
+                        assert_not_reached("Unknown format string argument."); \
+                }                                                       \
+        }                                                               \
+} while(false)
 
-#endif
+ /* Because statfs.t_type can be int on some architecures, we have to cast
+  * the const magic to the type, otherwise the compiler warns about
+  * signed/unsigned comparison, because the magic can be 32 bit unsigned.
+ */
+#define F_TYPE_CMP(a, b) (a == (typeof(a)) b)
+
+
+/* Returns the number of chars needed to format variables of the
+ * specified type as a decimal string. Adds in extra space for a
+ * negative '-' prefix. */
+
+#define DECIMAL_STR_MAX(type)                                           \
+        (1+(sizeof(type) <= 1 ? 3 :                                     \
+            sizeof(type) <= 2 ? 5 :                                     \
+            sizeof(type) <= 4 ? 10 :                                    \
+            sizeof(type) <= 8 ? 20 : sizeof(int[-2*(sizeof(type) > 8)])))
+
+#include "log.h"

install/strv.c

@@ -0,0 +1,587 @@
+/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
+
+/***
+  This file is part of systemd.
+
+  Copyright 2010 Lennart Poettering
+
+  systemd is free software; you can redistribute it and/or modify it
+  under the terms of the GNU Lesser General Public License as published by
+  the Free Software Foundation; either version 2.1 of the License, or
+  (at your option) any later version.
+
+  systemd is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public License
+  along with systemd; If not, see <http://www.gnu.org/licenses/>.
+***/
+
+#include <assert.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <errno.h>
+
+#include "util.h"
+#include "strv.h"
+
+char *strv_find(char **l, const char *name) {
+        char **i;
+
+        assert(name);
+
+        STRV_FOREACH(i, l)
+                if (streq(*i, name))
+                        return *i;
+
+        return NULL;
+}
+
+char *strv_find_prefix(char **l, const char *name) {
+        char **i;
+
+        assert(name);
+
+        STRV_FOREACH(i, l)
+                if (startswith(*i, name))
+                        return *i;
+
+        return NULL;
+}
+
+void strv_free(char **l) {
+        char **k;
+
+        if (!l)
+                return;
+
+        for (k = l; *k; k++)
+                free(*k);
+
+        free(l);
+}
+
+char **strv_copy(char * const *l) {
+        char **r, **k;
+
+        k = r = new(char*, strv_length(l) + 1);
+        if (!r)
+                return NULL;
+
+        if (l)
+                for (; *l; k++, l++) {
+                        *k = strdup(*l);
+                        if (!*k) {
+                                strv_free(r);
+                                return NULL;
+                        }
+                }
+
+        *k = NULL;
+        return r;
+}
+
+unsigned strv_length(char * const *l) {
+        unsigned n = 0;
+
+        if (!l)
+                return 0;
+
+        for (; *l; l++)
+                n++;
+
+        return n;
+}
+
+char **strv_new_ap(const char *x, va_list ap) {
+        const char *s;
+        char **a;
+        unsigned n = 0, i = 0;
+        va_list aq;
+
+        /* As a special trick we ignore all listed strings that equal
+         * (const char*) -1. This is supposed to be used with the
+         * STRV_IFNOTNULL() macro to include possibly NULL strings in
+         * the string list. */
+
+        if (x) {
+                n = x == (const char*) -1 ? 0 : 1;
+
+                va_copy(aq, ap);
+                while ((s = va_arg(aq, const char*))) {
+                        if (s == (const char*) -1)
+                                continue;
+
+                        n++;
+                }
+
+                va_end(aq);
+        }
+
+        a = new(char*, n+1);
+        if (!a)
+                return NULL;
+
+        if (x) {
+                if (x != (const char*) -1) {
+                        a[i] = strdup(x);
+                        if (!a[i])
+                                goto fail;
+                        i++;
+                }
+
+                while ((s = va_arg(ap, const char*))) {
+
+                        if (s == (const char*) -1)
+                                continue;
+
+                        a[i] = strdup(s);
+                        if (!a[i])
+                                goto fail;
+
+                        i++;
+                }
+        }
+
+        a[i] = NULL;
+
+        return a;
+
+fail:
+        strv_free(a);
+        return NULL;
+}
+
+char **strv_new(const char *x, ...) {
+        char **r;
+        va_list ap;
+
+        va_start(ap, x);
+        r = strv_new_ap(x, ap);
+        va_end(ap);
+
+        return r;
+}
+
+char **strv_merge(char **a, char **b) {
+        char **r, **k;
+
+        if (!a)
+                return strv_copy(b);
+
+        if (!b)
+                return strv_copy(a);
+
+        r = new(char*, strv_length(a) + strv_length(b) + 1);
+        if (!r)
+                return NULL;
+
+        for (k = r; *a; k++, a++) {
+                *k = strdup(*a);
+                if (!*k)
+                        goto fail;
+        }
+
+        for (; *b; k++, b++) {
+                *k = strdup(*b);
+                if (!*k)
+                        goto fail;
+        }
+
+        *k = NULL;
+        return r;
+
+fail:
+        strv_free(r);
+        return NULL;
+}
+
+char **strv_merge_concat(char **a, char **b, const char *suffix) {
+        char **r, **k;
+
+        /* Like strv_merge(), but appends suffix to all strings in b, before adding */
+
+        if (!b)
+                return strv_copy(a);
+
+        r = new(char*, strv_length(a) + strv_length(b) + 1);
+        if (!r)
+                return NULL;
+
+        k = r;
+        if (a)
+                for (; *a; k++, a++) {
+                        *k = strdup(*a);
+                        if (!*k)
+                                goto fail;
+                }
+
+        for (; *b; k++, b++) {
+                *k = strappend(*b, suffix);
+                if (!*k)
+                        goto fail;
+        }
+
+        *k = NULL;
+        return r;
+
+fail:
+        strv_free(r);
+        return NULL;
+
+}
+
+char **strv_split(const char *s, const char *separator) {
+        char *state;
+        char *w;
+        size_t l;
+        unsigned n, i;
+        char **r;
+
+        assert(s);
+
+        n = 0;
+        FOREACH_WORD_SEPARATOR(w, l, s, separator, state)
+                n++;
+
+        r = new(char*, n+1);
+        if (!r)
+                return NULL;
+
+        i = 0;
+        FOREACH_WORD_SEPARATOR(w, l, s, separator, state) {
+                r[i] = strndup(w, l);
+                if (!r[i]) {
+                        strv_free(r);
+                        return NULL;
+                }
+
+                i++;
+        }
+
+        r[i] = NULL;
+        return r;
+}
+
+char **strv_split_quoted(const char *s) {
+        char *state;
+        char *w;
+        size_t l;
+        unsigned n, i;
+        char **r;
+
+        assert(s);
+
+        n = 0;
+        FOREACH_WORD_QUOTED(w, l, s, state)
+                n++;
+
+        r = new(char*, n+1);
+        if (!r)
+                return NULL;
+
+        i = 0;
+        FOREACH_WORD_QUOTED(w, l, s, state) {
+                r[i] = cunescape_length(w, l);
+                if (!r[i]) {
+                        strv_free(r);
+                        return NULL;
+                }
+                i++;
+        }
+
+        r[i] = NULL;
+        return r;
+}
+
+char **strv_split_newlines(const char *s) {
+        char **l;
+        unsigned n;
+
+        assert(s);
+
+        /* Special version of strv_split() that splits on newlines and
+         * suppresses an empty string at the end */
+
+        l = strv_split(s, NEWLINE);
+        if (!l)
+                return NULL;
+
+        n = strv_length(l);
+        if (n <= 0)
+                return l;
+
+        if (isempty(l[n-1])) {
+                free(l[n-1]);
+                l[n-1] = NULL;
+        }
+
+        return l;
+}
+
+char *strv_join(char **l, const char *separator) {
+        char *r, *e;
+        char **s;
+        size_t n, k;
+
+        if (!separator)
+                separator = " ";
+
+        k = strlen(separator);
+
+        n = 0;
+        STRV_FOREACH(s, l) {
+                if (n != 0)
+                        n += k;
+                n += strlen(*s);
+        }
+
+        r = new(char, n+1);
+        if (!r)
+                return NULL;
+
+        e = r;
+        STRV_FOREACH(s, l) {
+                if (e != r)
+                        e = stpcpy(e, separator);
+
+                e = stpcpy(e, *s);
+        }
+
+        *e = 0;
+
+        return r;
+}
+
+char **strv_append(char **l, const char *s) {
+        char **r, **k;
+
+        if (!l)
+                return strv_new(s, NULL);
+
+        if (!s)
+                return strv_copy(l);
+
+        r = new(char*, strv_length(l)+2);
+        if (!r)
+                return NULL;
+
+        for (k = r; *l; k++, l++) {
+                *k = strdup(*l);
+                if (!*k)
+                        goto fail;
+        }
+
+        k[0] = strdup(s);
+        if (!k[0])
+                goto fail;
+
+        k[1] = NULL;
+        return r;
+
+fail:
+        strv_free(r);
+        return NULL;
+}
+
+int strv_push(char ***l, char *value) {
+        char **c;
+        unsigned n;
+
+        if (!value)
+                return 0;
+
+        n = strv_length(*l);
+        c = realloc(*l, sizeof(char*) * (n + 2));
+        if (!c)
+                return -ENOMEM;
+
+        c[n] = value;
+        c[n+1] = NULL;
+
+        *l = c;
+        return 0;
+}
+
+int strv_extend(char ***l, const char *value) {
+        char *v;
+        int r;
+
+        if (!value)
+                return 0;
+
+        v = strdup(value);
+        if (!v)
+                return -ENOMEM;
+
+        r = strv_push(l, v);
+        if (r < 0)
+                free(v);
+
+        return r;
+}
+
+char **strv_uniq(char **l) {
+        char **i;
+
+        /* Drops duplicate entries. The first identical string will be
+         * kept, the others dropped */
+
+        STRV_FOREACH(i, l)
+                strv_remove(i+1, *i);
+
+        return l;
+}
+
+char **strv_remove(char **l, const char *s) {
+        char **f, **t;
+
+        if (!l)
+                return NULL;
+
+        assert(s);
+
+        /* Drops every occurrence of s in the string list, edits
+         * in-place. */
+
+        for (f = t = l; *f; f++) {
+
+                if (streq(*f, s)) {
+                        free(*f);
+                        continue;
+                }
+
+                *(t++) = *f;
+        }
+
+        *t = NULL;
+        return l;
+}
+
+char **strv_remove_prefix(char **l, const char *s) {
+        char **f, **t;
+
+        if (!l)
+                return NULL;
+
+        assert(s);
+
+        /* Drops every occurrence of a string prefixed with s in the
+         * string list, edits in-place. */
+
+        for (f = t = l; *f; f++) {
+
+                if (startswith(*f, s)) {
+                        free(*f);
+                        continue;
+                }
+
+                *(t++) = *f;
+        }
+
+        *t = NULL;
+        return l;
+}
+
+char **strv_parse_nulstr(const char *s, size_t l) {
+        const char *p;
+        unsigned c = 0, i = 0;
+        char **v;
+
+        assert(s || l <= 0);
+
+        if (l <= 0)
+                return new0(char*, 1);
+
+        for (p = s; p < s + l; p++)
+                if (*p == 0)
+                        c++;
+
+        if (s[l-1] != 0)
+                c++;
+
+        v = new0(char*, c+1);
+        if (!v)
+                return NULL;
+
+        p = s;
+        while (p < s + l) {
+                const char *e;
+
+                e = memchr(p, 0, s + l - p);
+
+                v[i] = strndup(p, e ? e - p : s + l - p);
+                if (!v[i]) {
+                        strv_free(v);
+                        return NULL;
+                }
+
+                i++;
+
+                if (!e)
+                        break;
+
+                p = e + 1;
+        }
+
+        assert(i == c);
+
+        return v;
+}
+
+char **strv_split_nulstr(const char *s) {
+        const char *i;
+        char **r = NULL;
+
+        NULSTR_FOREACH(i, s)
+                if (strv_extend(&r, i) < 0) {
+                        strv_free(r);
+                        return NULL;
+                }
+
+        if (!r)
+                return strv_new(NULL, NULL);
+
+        return r;
+}
+
+bool strv_overlap(char **a, char **b) {
+        char **i, **j;
+
+        STRV_FOREACH(i, a) {
+                STRV_FOREACH(j, b) {
+                        if (streq(*i, *j))
+                                return true;
+                }
+        }
+
+        return false;
+}
+
+static int str_compare(const void *_a, const void *_b) {
+        const char **a = (const char**) _a, **b = (const char**) _b;
+
+        return strcmp(*a, *b);
+}
+
+char **strv_sort(char **l) {
+
+        if (strv_isempty(l))
+                return l;
+
+        qsort(l, strv_length(l), sizeof(char*), str_compare);
+        return l;
+}
+
+void strv_print(char **l) {
+        char **s;
+
+        if (!l)
+                return;
+
+        STRV_FOREACH(s, l)
+                puts(*s);
+}

install/strv.h

@@ -0,0 +1,118 @@
+/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
+
+#pragma once
+
+/***
+  This file is part of systemd.
+
+  Copyright 2010 Lennart Poettering
+
+  systemd is free software; you can redistribute it and/or modify it
+  under the terms of the GNU Lesser General Public License as published by
+  the Free Software Foundation; either version 2.1 of the License, or
+  (at your option) any later version.
+
+  systemd is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public License
+  along with systemd; If not, see <http://www.gnu.org/licenses/>.
+***/
+
+#include <stdarg.h>
+#include <stdbool.h>
+
+#include "util.h"
+
+char *strv_find(char **l, const char *name) _pure_;
+char *strv_find_prefix(char **l, const char *name) _pure_;
+
+void strv_free(char **l);
+DEFINE_TRIVIAL_CLEANUP_FUNC(char**, strv_free);
+#define _cleanup_strv_free_ _cleanup_(strv_freep)
+
+char **strv_copy(char * const *l);
+unsigned strv_length(char * const *l) _pure_;
+
+char **strv_merge(char **a, char **b);
+char **strv_merge_concat(char **a, char **b, const char *suffix);
+char **strv_append(char **l, const char *s);
+int strv_extend(char ***l, const char *value);
+int strv_push(char ***l, char *value);
+
+char **strv_remove(char **l, const char *s);
+char **strv_remove_prefix(char **l, const char *s);
+char **strv_uniq(char **l);
+
+#define strv_contains(l, s) (!!strv_find((l), (s)))
+
+char **strv_new(const char *x, ...) _sentinel_;
+char **strv_new_ap(const char *x, va_list ap);
+
+static inline const char* STRV_IFNOTNULL(const char *x) {
+        return x ? x : (const char *) -1;
+}
+
+static inline bool strv_isempty(char * const *l) {
+        return !l || !*l;
+}
+
+char **strv_split(const char *s, const char *separator);
+char **strv_split_quoted(const char *s);
+char **strv_split_newlines(const char *s);
+
+char *strv_join(char **l, const char *separator);
+
+char **strv_parse_nulstr(const char *s, size_t l);
+char **strv_split_nulstr(const char *s);
+
+bool strv_overlap(char **a, char **b) _pure_;
+
+#define STRV_FOREACH(s, l)                      \
+        for ((s) = (l); (s) && *(s); (s)++)
+
+#define STRV_FOREACH_BACKWARDS(s, l)            \
+        STRV_FOREACH(s, l)                      \
+                ;                               \
+        for ((s)--; (l) && ((s) >= (l)); (s)--)
+
+#define STRV_FOREACH_PAIR(x, y, l)               \
+        for ((x) = (l), (y) = (x+1); (x) && *(x) && *(y); (x) += 2, (y) = (x + 1))
+
+char **strv_sort(char **l);
+void strv_print(char **l);
+
+#define STRV_MAKE(...) ((char**) ((const char*[]) { __VA_ARGS__, NULL }))
+
+#define STRV_MAKE_EMPTY ((char*[1]) { NULL })
+
+#define strv_from_stdarg_alloca(first)                          \
+        ({                                                      \
+                char **_l;                                      \
+                                                                \
+                if (!first)                                     \
+                        _l = (char**) &first;                   \
+                else {                                          \
+                        unsigned _n;                            \
+                        va_list _ap;                            \
+                                                                \
+                        _n = 1;                                 \
+                        va_start(_ap, first);                   \
+                        while (va_arg(_ap, char*))              \
+                                _n++;                           \
+                        va_end(_ap);                            \
+                                                                \
+                        _l = newa(char*, _n+1);                 \
+                        _l[_n = 0] = (char*) first;             \
+                        va_start(_ap, first);                   \
+                        for (;;) {                              \
+                                _l[++_n] = va_arg(_ap, char*);  \
+                                if (!_l[_n])                    \
+                                        break;                  \
+                        }                                       \
+                        va_end(_ap);                            \
+                }                                               \
+                _l;                                             \
+        })

install/util.c

@@ -185,3 +185,330 @@ static const char *const log_level_table[] = {
 };
 
 DEFINE_STRING_TABLE_LOOKUP(log_level, int);
+
+char *strnappend(const char *s, const char *suffix, size_t b) {
+        size_t a;
+        char *r;
+
+        if (!s && !suffix)
+                return strdup("");
+
+        if (!s)
+                return strndup(suffix, b);
+
+        if (!suffix)
+                return strdup(s);
+
+        assert(s);
+        assert(suffix);
+
+        a = strlen(s);
+        if (b > ((size_t) -1) - a)
+                return NULL;
+
+        r = new(char, a+b+1);
+        if (!r)
+                return NULL;
+
+        memcpy(r, s, a);
+        memcpy(r+a, suffix, b);
+        r[a+b] = 0;
+
+        return r;
+}
+
+char *strappend(const char *s, const char *suffix) {
+        return strnappend(s, suffix, suffix ? strlen(suffix) : 0);
+}
+
+char *strjoin(const char *x, ...) {
+        va_list ap;
+        size_t l;
+        char *r, *p;
+
+        va_start(ap, x);
+
+        if (x) {
+                l = strlen(x);
+
+                for (;;) {
+                        const char *t;
+                        size_t n;
+
+                        t = va_arg(ap, const char *);
+                        if (!t)
+                                break;
+
+                        n = strlen(t);
+                        if (n > ((size_t) -1) - l) {
+                                va_end(ap);
+                                return NULL;
+                        }
+
+                        l += n;
+                }
+        } else
+                l = 0;
+
+        va_end(ap);
+
+        r = new(char, l+1);
+        if (!r)
+                return NULL;
+
+        if (x) {
+                p = stpcpy(r, x);
+
+                va_start(ap, x);
+
+                for (;;) {
+                        const char *t;
+
+                        t = va_arg(ap, const char *);
+                        if (!t)
+                                break;
+
+                        p = stpcpy(p, t);
+                }
+
+                va_end(ap);
+        } else
+                r[0] = 0;
+
+        return r;
+}
+
+char *cunescape_length_with_prefix(const char *s, size_t length, const char *prefix) {
+        char *r, *t;
+        const char *f;
+        size_t pl;
+
+        assert(s);
+
+        /* Undoes C style string escaping, and optionally prefixes it. */
+
+        pl = prefix ? strlen(prefix) : 0;
+
+        r = new(char, pl+length+1);
+        if (!r)
+                return r;
+
+        if (prefix)
+                memcpy(r, prefix, pl);
+
+        for (f = s, t = r + pl; f < s + length; f++) {
+
+                if (*f != '\\') {
+                        *(t++) = *f;
+                        continue;
+                }
+
+                f++;
+
+                switch (*f) {
+
+                case 'a':
+                        *(t++) = '\a';
+                        break;
+                case 'b':
+                        *(t++) = '\b';
+                        break;
+                case 'f':
+                        *(t++) = '\f';
+                        break;
+                case 'n':
+                        *(t++) = '\n';
+                        break;
+                case 'r':
+                        *(t++) = '\r';
+                        break;
+                case 't':
+                        *(t++) = '\t';
+                        break;
+                case 'v':
+                        *(t++) = '\v';
+                        break;
+                case '\\':
+                        *(t++) = '\\';
+                        break;
+                case '"':
+                        *(t++) = '"';
+                        break;
+                case '\'':
+                        *(t++) = '\'';
+                        break;
+
+                case 's':
+                        /* This is an extension of the XDG syntax files */
+                        *(t++) = ' ';
+                        break;
+
+                case 'x': {
+                        /* hexadecimal encoding */
+                        int a, b;
+
+                        a = unhexchar(f[1]);
+                        b = unhexchar(f[2]);
+
+                        if (a < 0 || b < 0) {
+                                /* Invalid escape code, let's take it literal then */
+                                *(t++) = '\\';
+                                *(t++) = 'x';
+                        } else {
+                                *(t++) = (char) ((a << 4) | b);
+                                f += 2;
+                        }
+
+                        break;
+                }
+
+                case '0':
+                case '1':
+                case '2':
+                case '3':
+                case '4':
+                case '5':
+                case '6':
+                case '7': {
+                        /* octal encoding */
+                        int a, b, c;
+
+                        a = unoctchar(f[0]);
+                        b = unoctchar(f[1]);
+                        c = unoctchar(f[2]);
+
+                        if (a < 0 || b < 0 || c < 0) {
+                                /* Invalid escape code, let's take it literal then */
+                                *(t++) = '\\';
+                                *(t++) = f[0];
+                        } else {
+                                *(t++) = (char) ((a << 6) | (b << 3) | c);
+                                f += 2;
+                        }
+
+                        break;
+                }
+
+                case 0:
+                        /* premature end of string.*/
+                        *(t++) = '\\';
+                        goto finish;
+
+                default:
+                        /* Invalid escape code, let's take it literal then */
+                        *(t++) = '\\';
+                        *(t++) = *f;
+                        break;
+                }
+        }
+
+finish:
+        *t = 0;
+        return r;
+}
+
+char *cunescape_length(const char *s, size_t length) {
+        return cunescape_length_with_prefix(s, length, NULL);
+}
+
+
+/* Split a string into words, but consider strings enclosed in '' and
+ * "" as words even if they include spaces. */
+char *split_quoted(const char *c, size_t *l, char **state) {
+        const char *current, *e;
+        bool escaped = false;
+
+        assert(c);
+        assert(l);
+        assert(state);
+
+        current = *state ? *state : c;
+
+        current += strspn(current, WHITESPACE);
+
+        if (*current == 0)
+                return NULL;
+
+        else if (*current == '\'') {
+                current ++;
+
+                for (e = current; *e; e++) {
+                        if (escaped)
+                                escaped = false;
+                        else if (*e == '\\')
+                                escaped = true;
+                        else if (*e == '\'')
+                                break;
+                }
+
+                *l = e-current;
+                *state = (char*) (*e == 0 ? e : e+1);
+
+        } else if (*current == '\"') {
+                current ++;
+
+                for (e = current; *e; e++) {
+                        if (escaped)
+                                escaped = false;
+                        else if (*e == '\\')
+                                escaped = true;
+                        else if (*e == '\"')
+                                break;
+                }
+
+                *l = e-current;
+                *state = (char*) (*e == 0 ? e : e+1);
+
+        } else {
+                for (e = current; *e; e++) {
+                        if (escaped)
+                                escaped = false;
+                        else if (*e == '\\')
+                                escaped = true;
+                        else if (strchr(WHITESPACE, *e))
+                                break;
+                }
+                *l = e-current;
+                *state = (char*) e;
+        }
+
+        return (char*) current;
+}
+
+/* Split a string into words. */
+char *split(const char *c, size_t *l, const char *separator, char **state) {
+        char *current;
+
+        current = *state ? *state : (char*) c;
+
+        if (!*current || *c == 0)
+                return NULL;
+
+        current += strspn(current, separator);
+        *l = strcspn(current, separator);
+        *state = current+*l;
+
+        return (char*) current;
+}
+
+int unhexchar(char c) {
+
+        if (c >= '0' && c <= '9')
+                return c - '0';
+
+        if (c >= 'a' && c <= 'f')
+                return c - 'a' + 10;
+
+        if (c >= 'A' && c <= 'F')
+                return c - 'A' + 10;
+
+        return -1;
+}
+
+int unoctchar(char c) {
+
+        if (c >= '0' && c <= '7')
+                return c - '0';
+
+        return -1;
+}

install/util.h

@@ -134,8 +134,16 @@ static inline bool isempty(const char *p) {
         return !p || !p[0];
 }
 
+
+static inline const char *startswith(const char *s, const char *prefix) {
+        if (strncmp(s, prefix, strlen(prefix)) == 0)
+                return s + strlen(prefix);
+        return NULL;
+}
+
 bool endswith(const char *s, const char *postfix);
-bool startswith(const char *s, const char *prefix);
+
+
 bool startswith_no_case(const char *s, const char *prefix);
 
 bool first_word(const char *s, const char *word);
@@ -507,6 +515,42 @@ void* memdup(const void *p, size_t l);
 
 int is_kernel_thread(pid_t pid);
 
+static inline void freep(void *p) {
+        free(*(void**) p);
+}
+
+static inline void fclosep(FILE **f) {
+        if (*f)
+                fclose(*f);
+}
+
+static inline void pclosep(FILE **f) {
+        if (*f)
+                pclose(*f);
+}
+
+static inline void closep(int *fd) {
+        if (*fd >= 0)
+                close_nointr_nofail(*fd);
+}
+
+static inline void closedirp(DIR **d) {
+        if (*d)
+                closedir(*d);
+}
+
+static inline void umaskp(mode_t *u) {
+        umask(*u);
+}
+
+#define _cleanup_free_ _cleanup_(freep)
+#define _cleanup_fclose_ _cleanup_(fclosep)
+#define _cleanup_pclose_ _cleanup_(pclosep)
+#define _cleanup_close_ _cleanup_(closep)
+#define _cleanup_closedir_ _cleanup_(closedirp)
+#define _cleanup_umask_ _cleanup_(umaskp)
+#define _cleanup_globfree_ _cleanup_(globfree)
+
 int fd_inc_sndbuf(int fd, size_t n);
 int fd_inc_rcvbuf(int fd, size_t n);
 
@@ -524,4 +568,18 @@ bool in_initrd(void);
 
 void warn_melody(void);
 
+char *strjoin(const char *x, ...) _sentinel_;
+
+#define DEFINE_TRIVIAL_CLEANUP_FUNC(type, func)                 \
+        static inline void func##p(type *p) {                   \
+                if (*p)                                         \
+                        func(*p);                               \
+        }                                                       \
+        struct __useless_struct_to_allow_trailing_semicolon__
+
+char *split_quoted(const char *c, size_t *l, char **state);
+char *cunescape_length(const char *s, size_t length);
+int unhexchar(char c) _const_;
+int unoctchar(char c) _const_;
+
 #endif

lsinitrd-bash-completion.sh

@@ -0,0 +1,63 @@
+#
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Copyright 2013 Red Hat, Inc.  All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+__contains_word () {
+        local word=$1; shift
+        for w in $*; do [[ $w = $word ]] && return 0; done
+        return 1
+}
+
+_lsinitrd() {
+        local field_vals= cur=${COMP_WORDS[COMP_CWORD]} prev=${COMP_WORDS[COMP_CWORD-1]}
+        local -A OPTS=(
+                [STANDALONE]='-s --size -h --help'
+
+                       [ARG]='-f --file -k --kver'
+        )
+
+        if __contains_word "$prev" ${OPTS[ARG]}; then
+                case $prev in
+                        --file|-f)
+                                comps=$(compgen -f -- "$cur")
+                                compopt -o filenames
+                        ;;
+                        --kver|-k)
+                                comps=$(cd /lib/modules; echo [0-9]*)
+                        ;;
+                        *)
+                                return 0
+                        ;;
+                esac
+                COMPREPLY=( $(compgen -W '$comps' -- "$cur") )
+                return 0
+        fi
+
+        if [[ $cur = -* ]]; then
+                COMPREPLY=( $(compgen -W '${OPTS[*]}' -- "$cur") )
+                return 0
+        fi
+
+        comps=$(compgen -f -- "$cur")
+        compopt -o filenames
+        COMPREPLY=( $(compgen -W '$comps' -- "$cur") )
+        return 0
+}
+
+complete -F _lsinitrd lsinitrd

lsinitrd.1.asc

@@ -10,12 +10,15 @@ lsinitrd - tool to show the contents of an initramfs image
 
 SYNOPSIS
 --------
-*lsinit* ['OPTION...'] [<image>]
+*lsinitrd* ['OPTION...'] [<image> [<filename> [<filename> [...] ]]]
+
+*lsinitrd* ['OPTION...'] -k <kernel-version>
 
 DESCRIPTION
 -----------
 lsinitrd shows the contents of an initramfs image. if <image> is omitted, then
-lsinitrd uses the default image /boot/initramfs-<kernel version>.img.
+lsinitrd uses the default image _/boot/<machine-id>/<kernel-version>/initrd_ or
+_/boot/initramfs-<kernel-version>.img_.
 
 OPTIONS
 -------
@@ -25,6 +28,12 @@ OPTIONS
 **-s, --size**::
     sort the contents of the initramfs by size.
 
+**-f, --file** _<filename>_::
+    print the contents of <filename>.
+
+**-k, --kver** _<kernel version>_::
+    inspect the initramfs of <kernel version>.
+
 AVAILABILITY
 ------------
 The lsinitrd command is part of the dracut package and is available from

lsinitrd.sh

@@ -21,55 +21,193 @@
 
 usage()
 {
-    echo "Usage: $(basename $0) [-s] [<initramfs file> [<filename>]]"
+    {
+        echo "Usage: ${0##*/} [options] [<initramfs file> [<filename> [<filename> [...] ]]]"
+        echo "Usage: ${0##*/} [options] -k <kernel version>"
+        echo
+        echo "-h, --help                  print a help message and exit."
+        echo "-s, --size                  sort the contents of the initramfs by size."
+        echo "-f, --file <filename>       print the contents of <filename>."
+        echo "-k, --kver <kernel version> inspect the initramfs of <kernel version>."
+        echo
+    } >&2
 }
 
-[[ $# -le 2 ]] || { usage ; exit 1 ; }
+
+[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
 
 sorted=0
-while getopts "s" opt; do
-    case $opt in
-        s)  sorted=1;;
-        h)  usage; exit 0;;
-        \?) usage; exit 1;;
+declare -A filenames
+
+unset POSIXLY_CORRECT
+TEMP=$(getopt \
+    -o "shf:k:" \
+    --long kver: \
+    --long file: \
+    --long help \
+    --long size \
+    -- "$@")
+
+if (( $? != 0 )); then
+    usage
+    exit 1
+fi
+
+eval set -- "$TEMP"
+
+while (($# > 0)); do
+    case $1 in
+        -k|--kver)  KERNEL_VERSION="$2"; shift;;
+        -f|--file)  filenames[${2#/}]=1; shift;;
+        -s|--size)  sorted=1;;
+        -h|--help)  usage; exit 0;;
+        --)         shift;break;;
+        *)          usage; exit 1;;
     esac
+    shift
 done
-shift $((OPTIND-1))
 
-image="${1:-/boot/initramfs-$(uname -r).img}"
-[[ -f "$image" ]]    || { echo "$image does not exist" ; exit 1 ; }
+[[ $KERNEL_VERSION ]] || KERNEL_VERSION="$(uname -r)"
 
-CAT=zcat
-FILE_T=$(file --dereference "$image")
-
-if echo "test"|xz|xz -dc --single-stream >/dev/null 2>&1; then
-    XZ_SINGLE_STREAM="--single-stream"
-fi
-
-if [[ "$FILE_T" =~ :\ gzip\ compressed\ data ]]; then
-    CAT=zcat
-elif [[ "$FILE_T" =~ :\ xz\ compressed\ data ]]; then
-    CAT="xzcat $XZ_SINGLE_STREAM"
-elif [[ "$FILE_T" =~ :\ XZ\ compressed\ data ]]; then
-    CAT="xzcat $XZ_SINGLE_STREAM"
-elif [[ "$FILE_T" =~ :\ LZMA ]]; then
-    CAT="xzcat $XZ_SINGLE_STREAM"
-elif [[ "$FILE_T" =~ :\ data ]]; then
-    CAT="xzcat $XZ_SINGLE_STREAM"
-fi
-
-if [[ $# -eq 2 ]]; then
-    $CAT $image | cpio --extract --verbose --quiet --to-stdout ${2#/} 2>/dev/null
-    exit $?
-fi
-
-echo "$image: $(du -h $image | while read a b; do echo $a;done)"
-echo "========================================================================"
-$CAT "$image" | cpio --extract --verbose --quiet --to-stdout '*lib/dracut/dracut-*' 2>/dev/null
-echo "========================================================================"
-if [ "$sorted" -eq 1 ]; then
-    $CAT "$image" | cpio --extract --verbose --quiet --list | sort -n -k5
+if [[ $1 ]]; then
+    image="$1"
+    if ! [[ -f "$image" ]]; then
+        {
+            echo "$image does not exist"
+            echo
+        } >&2
+        usage
+        exit 1
+    fi
 else
-    $CAT "$image" | cpio --extract --verbose --quiet --list
+    [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
+
+    if [[ -d /boot/loader/entries || -L /boot/loader/entries ]] \
+        && [[ $MACHINE_ID ]] \
+        && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
+        image="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
+    else
+        image="/boot/initramfs-${KERNEL_VERSION}.img"
+    fi
 fi
-echo "========================================================================"
+
+shift
+while (($# > 0)); do
+    filenames[${1#/}]=1;
+    shift
+done
+
+if ! [[ -f "$image" ]]; then
+    {
+        echo "No <initramfs file> specified and the default image '$image' cannot be accessed!"
+        echo
+    } >&2
+    usage
+    exit 1
+fi
+
+extract_files()
+{
+    (( ${#filenames[@]} == 1 )) && nofileinfo=1
+    for f in ${!filenames[@]}; do
+        [[ $nofileinfo ]] || echo "initramfs:/$f"
+        [[ $nofileinfo ]] || echo "========================================================================"
+        $CAT $image | cpio --extract --verbose --quiet --to-stdout $f 2>/dev/null
+        ((ret+=$?))
+        [[ $nofileinfo ]] || echo "========================================================================"
+        [[ $nofileinfo ]] || echo
+    done
+}
+
+list_files()
+{
+    echo "========================================================================"
+    if [ "$sorted" -eq 1 ]; then
+        $CAT "$image" | cpio --extract --verbose --quiet --list | sort -n -k5
+    else
+        $CAT "$image" | cpio --extract --verbose --quiet --list | sort -k9
+    fi
+    ((ret+=$?))
+    echo "========================================================================"
+}
+
+
+if (( ${#filenames[@]} <= 0 )); then
+    echo "Image: $image: $(du -h $image | while read a b; do echo $a;done)"
+    echo "========================================================================"
+fi
+
+read -N 6 bin < "$image"
+case $bin in
+    $'\x71\xc7'*|070701)
+        CAT="cat --"
+        is_early=$(cpio --extract --verbose --quiet --to-stdout -- 'early_cpio' < "$image" 2>/dev/null)
+        if [[ "$is_early" ]]; then
+            if (( ${#filenames[@]} > 0 )); then
+                extract_files
+            else
+                echo "Early CPIO image"
+                list_files
+            fi
+            SKIP="$dracutbasedir/skipcpio"
+            if ! [[ -x $SKIP ]]; then
+                echo
+                echo "'$SKIP' not found, cannot display remaining contents!" >&2
+                echo
+                exit 0
+            fi
+        fi
+        ;;
+esac
+
+if [[ $SKIP ]]; then
+    read -N 6 bin < <($SKIP "$image")
+fi
+
+case $bin in
+    $'\x1f\x8b'*)
+        CAT="zcat --";;
+    BZh*)
+        CAT="bzcat --";;
+    $'\x71\xc7'*|070701)
+        CAT="cat --"
+        ;;
+    $'\x04\x22'*)
+        CAT="lz4 -d -c";;
+    *)
+        CAT="xzcat --";
+        if echo "test"|xz|xzcat --single-stream >/dev/null 2>&1; then
+            CAT="xzcat --single-stream --"
+        fi
+        ;;
+esac
+
+skipcpio()
+{
+    $SKIP "$@" | $ORIG_CAT
+}
+
+if [[ $SKIP ]]; then
+    ORIG_CAT="$CAT"
+    CAT=skipcpio
+fi
+
+ret=0
+
+if (( ${#filenames[@]} > 0 )); then
+    extract_files
+else
+    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/dracut-*' 'usr/lib/dracut/dracut-*' 2>/dev/null)
+    ((ret+=$?))
+    echo "Version: $version"
+    echo
+    echo -n "Arguments: "
+    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/build-parameter.txt' 'usr/lib/dracut/build-parameter.txt' 2>/dev/null
+    echo
+    echo "dracut modules:"
+    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/modules.txt' 'usr/lib/dracut/modules.txt' 2>/dev/null
+    ((ret+=$?))
+    list_files
+fi
+
+exit $ret

mkinitrd-dracut.sh

@@ -1,6 +1,11 @@
 #!/bin/bash --norc
 kver=$(uname -r)
 
+boot_dir="/boot"
+quiet=0
+host_only=0
+force=0
+
 error() { echo "$@" >&2; }
 
 usage () {
@@ -24,36 +29,105 @@ read_arg() {
     # $1 = arg name
     # $2 = arg value
     # $3 = arg parameter
-    local rematch='^[^=]*=(.*)$'
+    param="$1"
+    local rematch='^[^=]*=(.*)$' result
     if [[ $2 =~ $rematch ]]; then
-        read "$1" <<< "${BASH_REMATCH[1]}"
-    elif [[ $3 != -* ]]; then
-        # Only read next arg if it not an arg itself.
-        read "$1" <<< "$3"
-        # There is no way to shift our callers args, so
-        # return 1 to indicate they should do it instead.
-        return 1
+        read "$param" <<< "${BASH_REMATCH[1]}"
+    else
+	for ((i=3; $i <= $#; i++)); do
+            # Only read next arg if it not an arg itself.
+            if [[ ${@:$i:1} = -* ]];then
+		break
+            fi
+            result="$result ${@:$i:1}"
+            # There is no way to shift our callers args, so
+            # return "no of args" to indicate they should do it instead.
+	done
+	read "$1" <<< "$result"
+        return $(($i - 3))
     fi
 }
 
+# Taken over from SUSE mkinitrd
+default_kernel_images() {
+    local regex kernel_image kernel_version version_version initrd_image
+    local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
+
+    case "$(uname -m)" in
+        s390|s390x)
+            regex='image'
+            ;;
+        ppc|ppc64)
+            regex='vmlinux'
+            ;;
+        i386|x86_64)
+            regex='vmlinuz'
+            ;;
+        arm*)
+            regex='[uz]Image'
+            ;;
+        aarch64)
+            regex='Image'
+            ;;
+        *)  regex='vmlinu.'
+            ;;
+    esac
+
+    # user mode linux
+    if grep -q UML /proc/cpuinfo; then
+            regex='linux'
+    fi
+
+    kernel_images=""
+    initrd_images=""
+    for kernel_image in $(ls $boot_dir \
+            | sed -ne "\|^$regex\(-[0-9.]\+-[0-9]\+-[a-z0-9]\+$\)\?|p" \
+            | grep -v kdump$ ) ; do
+
+        # Note that we cannot check the RPM database here -- this
+        # script is itself called from within the binary kernel
+        # packages, and rpm does not allow recursive calls.
+
+        [ -L "$boot_dir/$kernel_image" ] && continue
+        [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
+        kernel_version=$(/usr/bin/get_kernel_version \
+                         $boot_dir/$kernel_image 2> /dev/null)
+        initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
+        if [ "$kernel_image" != "$initrd_image" -a \
+             -n "$kernel_version" -a \
+             -d "/lib/modules/$kernel_version" ]; then
+                kernel_images="$kernel_images $boot_dir/$kernel_image"
+                initrd_images="$initrd_images $boot_dir/$initrd_image"
+        fi
+    done
+    for kernel_image in $kernel_images;do
+	kernels="$kernels ${kernel_image#*-}"
+    done
+    for initrd_image in $initrd_images;do
+	targets="$targets $initrd_image"
+    done
+    host_only=1
+    force=1
+}
+
 while (($# > 0)); do
     case ${1%%=*} in
-        --with-usb) read_arg usbmodule "$@" || shift
+        --with-usb) read_arg usbmodule "$@" || shift $?
             basicmodules="$basicmodules ${usbmodule:-usb-storage}"
             unset usbmodule;;
-        --with-avail) read_arg modname "$@" || shift
+        --with-avail) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
-        --with) read_arg modname "$@" || shift
+        --with) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
         --version)
             echo "mkinitrd: dracut compatibility wrapper"
             exit 0;;
         -v|--verbose) dracut_args="${dracut_args} -v";;
-        -f|--force) dracut_args="${dracut_args} -f";;
-        --preload) read_arg modname "$@" || shift
+        -f|--force) force=1;;
+        --preload) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
         --image-version) img_vers=yes;;
-        --rootfs) read_arg rootfs "$@" || shift
+        --rootfs|-d) read_arg rootfs "$@" || shift $?
             dracut_args="${dracut_args} --filesystems $rootfs";;
         --nocompress) dracut_args="$dracut_args --no-compress";;
         --help) usage -n;;
@@ -80,10 +154,31 @@ while (($# > 0)); do
         --looppath*) ;;
         --dsdt*) ;;
         --bootchart) ;;
-        *) if [[ ! $target ]]; then
-            target=$1
-            elif [[ ! $kernel ]]; then
-            kernel=$1
+	-s) ;;
+	--quiet|-q) quiet=1;;
+	-b) read_arg boot_dir "$@" || shift $?
+	    if [ ! -d $boot_dir ];then
+		error "Boot directory $boot_dir does not exist"
+		exit 1
+	    fi
+	    ;;
+	-k) # Would be nice to get a list of images here
+	    read_arg kernel_images "$@" || shift $?
+	    for kernel_image in $kernel_images;do
+		kernels="$kernels ${kernel_image#*-}"
+	    done
+	    host_only=1
+	    force=1
+	    ;;
+	-i) read_arg initrd_images "$@" || shift $?
+	    for initrd_image in $initrd_images;do
+		targets="$targets $boot_dir/$initrd_image"
+	    done
+	    ;;
+        *)  if [[ ! $targets ]]; then
+            targets=$1
+            elif [[ ! $kernels ]]; then
+            kernels=$1
             else
             usage
             fi;;
@@ -91,11 +186,41 @@ while (($# > 0)); do
     shift
 done
 
-[[ $target && $kernel ]] || usage
-[[ $img_vers ]] && target="$target-$kernel"
+[[ $targets && $kernels ]] || default_kernel_images
+[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage)
 
-if [[ $basicmodules ]]; then
-        dracut $dracut_args --add-drivers "$basicmodules" "$target" "$kernel"
-else
-        dracut $dracut_args "$target" "$kernel"
-fi
+# We can have several targets/kernels, transform the list to an array
+targets=( $targets )
+[[ $kernels ]] && kernels=( $kernels )
+
+[[ $host_only == 1 ]] && dracut_args="${dracut_args} -H"
+[[ $force == 1 ]]     && dracut_args="${dracut_args} -f"
+
+echo "Creating: target|kernel|dracut args|basicmodules "
+for ((i=0 ; $i<${#targets[@]} ; i++)); do
+
+    if [[ $img_vers ]];then
+	target="${targets[$i]}-${kernels[$i]}"
+    else
+	target="${targets[$i]}"
+    fi
+    kernel="${kernels[$i]}"
+
+    # Duplicate code: No way found how to redirect output based on $quiet
+    if [[ $quiet == 1 ]];then
+	echo "$target|$kernel|$dracut_args|$basicmodules"
+	if [[ $basicmodules ]]; then
+            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel" &>/dev/null
+	else
+            dracut $dracut_args "$target" "$kernel" &>/dev/null
+	fi
+    else
+	if [[ $basicmodules ]]; then
+            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel"
+	else
+            dracut $dracut_args "$target" "$kernel"
+	fi
+    fi
+done

mkinitrd-suse.8.asc

@@ -0,0 +1,106 @@
+MKINITRD(8)
+===========
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+mkinitrd-suse - is a compat wrapper, which calls dracut to generate an initramfs
+
+SYNOPSIS
+--------
+*mkinitrd* ['OPTION...']
+
+DESCRIPTION
+-----------
+*mkinitrd* creates an initramfs image <initrd-image> for the kernel with
+version <kernel-version> by calling *dracut*.
+
+[IMPORTANT]
+This version of mkinitrd is provided for compability with older
+versions of mkinitrd. If a more fine grained control over the
+resulting image is needed, *dracut* should be called directly.
+
+OPTIONS
+-------
+**-R, --version**::
+    print info about the version
+
+**-k** _<kernel_list>_::
+    List of kernel images for which initrd files are created (relative
+    to _boot_dir_), defaults to _vmlinux_ on ppc/ppc64, _image_ on s390/s390x
+    and _vmlinuz_ for everything else.
+
+**-i** _<initrd_list>_::
+    List of file names (relative to _boot_dir_) for the initrd; positions
+    have to match the _kernel_list_. Defaults to _initrd_.
+
+**-m** _<module_list>_::
+    Modules to include in initrd, defaults to _INITRD_MODULES_ variable
+    in */etc/sysconfig/kernel*.
+
+**-f** _<feature_list>_::
+    Features to be enabled for the initrd. In general mkinitrd
+    configures the initrd for the root device it is started from. With
+    this option additional feature can be enabled.
+
+**-b** _<bootdir>_::
+    Boot directory, defaults to */boot*, where the initrd is created.
+
+**-d** _<root_device>_::
+    Root device, defaults to the device from which the root_dir is
+    mounted; overwrites the rootdev enviroment variable if set
+
+**-s** _<size>_::
+    Add splash animation and bootscreen to initrd.
+
+**-D** _<interface>::
+    Run dhcp on the specified interface (for example "eth0").
+
+**-I** _<interface>::
+    Configure the specified interface statically.
+
+**-a** _<acpi_dsdt>::
+    Attach compiled ACPI DSDT (Differentiated System Description Table)
+    to initrd. This replaces the DSDT of the BIOS. Defaults to the
+    _ACPI_DSDT_ variable in */etc/sysconfig/kernel*.
+
+**-M** _<map>::
+    System.map file to use.
+
+**-B**::
+    Don’t run the *update-bootloader(8)* script after the initrd(s) have
+    been created. This is useful if you call mkinitrd(8) for anything
+    else than the running system.
+
+**-A**::
+    Create a so called "monster initrd" which includes all available
+    features and modules.
+
+**-v, --verbose**::
+    increase verbosity level
+
+**-L**::
+    Disable logging to _/var/log/YaST2/mkinitrd.log_. This is useful for
+    testing if you don’t want to clutter the system log.
+
+**--force**::
+    overwrite existing initramfs file.
+
+**--help**::
+    print a help message and exit.
+
+AVAILABILITY
+------------
+The mkinitrd command is part of the dracut package and is available from
+link:$$https://dracut.wiki.kernel.org$$[https://dracut.wiki.kernel.org]
+
+AUTHORS
+-------
+Harald Hoyer, Hannes Reinecke
+
+SEE ALSO
+--------
+*dracut*(8)
+*update-bootloader*(8)

mkinitrd-suse.sh

@@ -0,0 +1,354 @@
+#!/bin/bash --norc
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# mkinitrd compability wrapper for SUSE.
+#
+# Copyright (c) 2013 SUSE Linux Products GmbH. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+boot_dir="/boot"
+quiet=0
+host_only=1
+force=0
+logfile=/var/log/YaST2/mkinitrd.log
+dracut_cmd=dracut
+
+error() { echo "$@" >&2; }
+
+usage () {
+    [[ $1 = '-n' ]] && cmd=echo || cmd=error
+
+    $cmd "usage: ${0##*/} [options]"
+    $cmd ""
+    $cmd "	Create initial ramdisk images that contain all kernel modules needed"
+    $cmd "	in the early boot process, before the root file system becomes"
+    $cmd "	available."
+    $cmd "	This usually includes SCSI and/or RAID modules, a file system module"
+    $cmd "	for the root file system, or a network interface driver module for dhcp."
+    $cmd ""
+    $cmd "	options:"
+    $cmd "	-f \"feature list\"	Features to be enabled when generating initrd."
+    $cmd "				Available features are:"
+    $cmd "					iscsi, md, multipath, lvm, lvm2,"
+    $cmd "					ifup, fcoe, dcbd"
+    $cmd "	-k \"kernel list\"	List of kernel images for which initrd files are"
+    $cmd "				created. Defaults to all kernels found in /boot."
+    $cmd "	-i \"initrd list\"	List of file names for the initrd; position have"
+    $cmd "				match to \"kernel list\". Defaults to all kernels"
+    $cmd "				found in /boot."
+    $cmd "	-b boot_dir		Boot directory. Defaults to /boot."
+    $cmd "	-t tmp_dir		Temporary directory. Defaults to /var/tmp."
+    $cmd "	-M map			System.map file to use."
+    $cmd "	-A			Create a so called \"monster initrd\" which"
+    $cmd "				includes all features and modules possible."
+    $cmd "	-B			Do not update bootloader configuration."
+    $cmd "	-v			Verbose mode."
+    $cmd "	-L			Disable logging."
+    $cmd "	-h			This help screen."
+    $cmd "	-m \"module list\"	Modules to include in initrd. Defaults to the"
+    $cmd "				INITRD_MODULES variable in /etc/sysconfig/kernel"
+    $cmd "	-u \"DomU module list\"	Modules to include in initrd. Defaults to the"
+    $cmd "				DOMU_INITRD_MODULES variable in"
+    $cmd "				/etc/sysconfig/kernel."
+    $cmd "	-d root_device		Root device. Defaults to the device from"
+    $cmd "				which / is mounted. Overrides the rootdev"
+    $cmd "				enviroment variable if set."
+    $cmd "	-j device		Journal device"
+    $cmd "	-D interface		Run dhcp on the specified interface."
+    $cmd "	-I interface		Configure the specified interface statically."
+    $cmd "	-a acpi_dsdt		Attach compiled ACPI DSDT (Differentiated"
+    $cmd "				System Description Table) to initrd. This"
+    $cmd "				replaces the DSDT of the BIOS. Defaults to"
+    $cmd "				the ACPI_DSDT variable in /etc/sysconfig/kernel."
+    $cmd "	-s size			Add splash animation and bootscreen to initrd."
+
+    [[ $1 = '-n' ]] && exit 0
+    exit 1
+}
+
+# Little helper function for reading args from the commandline.
+# it automatically handles -a b and -a=b variants, and returns 1 if
+# we need to shift $3.
+read_arg() {
+    # $1 = arg name
+    # $2 = arg value
+    # $3 = arg parameter
+    param="$1"
+    local rematch='^[^=]*=(.*)$' result
+    if [[ $2 =~ $rematch ]]; then
+        read "$param" <<< "${BASH_REMATCH[1]}"
+    else
+	for ((i=3; $i <= $#; i++)); do
+            # Only read next arg if it not an arg itself.
+            if [[ ${@:$i:1} = -* ]];then
+		break
+            fi
+            result="$result ${@:$i:1}"
+            # There is no way to shift our callers args, so
+            # return "no of args" to indicate they should do it instead.
+	done
+	read "$1" <<< "$result"
+        return $(($i - 3))
+    fi
+}
+
+# Helper functions to calculate ipconfig command line
+calc_netmask() {
+    local prefix=$1
+
+    [ -z "$prefix" ] && return
+    mask=$(echo "(2 ^ 32) - (2 ^ $prefix)" | bc -l)
+    byte1=$(( mask >> 24 ))
+    byte2=$(( mask >> 16 ))
+    byte3=$(( mask >> 8 ))
+    byte4=$(( mask & 0xff ))
+    netmask=$(printf "%d.%d.%d.%d" $(( byte1 & 0xff )) $(( byte2 & 0xff )) $(( byte3 & 0xff )) $byte4);
+
+    echo $netmask
+}
+
+ipconfig() {
+    local interface=$1
+    local iplink macaddr broadcast gateway ipaddr prefix netmask
+
+    iplink=$(ip addr show dev $interface | sed -n 's/ *inet \(.*\) brd.*/\1/p')
+    macaddr=$(ip addr show dev $interface | sed -n 's/.*ether \(.*\) brd.*/\1/p')
+    broadcast=$(ip addr show dev $interface | sed -n 's/.*brd \(.*\) scope.*/\1/p')
+    gateway=$(ip route show dev $interface | sed -n 's/default via \([0-9\.]*\).*/\1/p')
+
+    ipaddr=${iplink%%/*}
+    prefix=${iplink##*/}
+    netmask=$(calc_netmask $prefix)
+
+    echo "${ipaddr}:${serveraddr}:${gateway}:${netmask}:${hostname}:${interface}:none::${macaddr}"
+}
+
+is_xen_kernel() {
+    local kversion=$1
+    local root_dir=$2
+    local cfg
+
+    for cfg in ${root_dir}/boot/config-$kversion $root_dir/lib/modules/$kversion/build/.config
+    do
+        test -r $cfg || continue
+        grep -q "^CONFIG_XEN=y\$" $cfg
+        return
+    done
+    test $kversion != "${kversion%-xen*}"
+    return
+}
+
+
+# Taken over from SUSE mkinitrd
+default_kernel_images() {
+    local regex kernel_image kernel_version version_version initrd_image
+    local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
+
+    case "$(uname -m)" in
+        s390|s390x)
+            regex='image'
+            ;;
+        ppc|ppc64)
+            regex='vmlinux'
+            ;;
+        i386|x86_64)
+            regex='vmlinuz'
+            ;;
+        arm*)
+            regex='[uz]Image'
+            ;;
+        aarch64)
+            regex='Image'
+            ;;
+        *)  regex='vmlinu.'
+            ;;
+    esac
+
+    kernel_images=""
+    initrd_images=""
+    for kernel_image in $(ls $boot_dir \
+            | sed -ne "\|^$regex\(-[0-9.]\+-[0-9]\+-[a-z0-9]\+$\)\?|p" \
+            | grep -v kdump$ ) ; do
+
+        # Note that we cannot check the RPM database here -- this
+        # script is itself called from within the binary kernel
+        # packages, and rpm does not allow recursive calls.
+
+        [ -L "$boot_dir/$kernel_image" ] && continue
+        [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
+        kernel_version=$(/usr/bin/get_kernel_version \
+                         $boot_dir/$kernel_image 2> /dev/null)
+        initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
+        if [ "$kernel_image" != "$initrd_image" -a \
+             -n "$kernel_version" -a \
+             -d "/lib/modules/$kernel_version" ]; then
+                kernel_images="$kernel_images $boot_dir/$kernel_image"
+                initrd_images="$initrd_images $boot_dir/$initrd_image"
+        fi
+    done
+    for kernel_image in $kernel_images;do
+	kernels="$kernels ${kernel_image#*-}"
+    done
+    for initrd_image in $initrd_images;do
+	targets="$targets $initrd_image"
+    done
+    host_only=1
+    force=1
+}
+
+while (($# > 0)); do
+    case ${1%%=*} in
+	-f) read_arg feature_list "$@" || shift $?
+	    # Could be several features
+	    ;;
+	-k) # Would be nice to get a list of images here
+	    read_arg kernel_images "$@" || shift $?
+	    for kernel_image in $kernel_images;do
+		kernels="$kernels ${kernel_image#*-}"
+	    done
+	    host_only=1
+	    force=1
+	    ;;
+	-i) read_arg initrd_images "$@" || shift $?
+	    for initrd_image in $initrd_images;do
+		# Check if the initrd_image contains a path.
+		# if not, then add the default boot_dir
+		dname=`dirname $initrd_image`
+		if [ "$dname" == "." ]; then
+                    targets="$targets $boot_dir/$initrd_image";
+		else
+                    targets="$targets $initrd_image";
+		fi
+	    done
+	    ;;
+	-b) read_arg boot_dir "$@" || shift $?
+	    if [ ! -d $boot_dir ];then
+		error "Boot directory $boot_dir does not exist"
+		exit 1
+	    fi
+	    ;;
+	-t) read_arg tmp_dir "$@" || shift $?
+	    dracut_args="${dracut_args} --tmpdir $tmp_dir"
+	    ;;
+	-M) read_arg map_file "$@" || shift $?
+	    ;;
+	-A) host_only=0;;
+	-B) skip_update_bootloader=1;;
+        -v|--verbose) dracut_args="${dracut_args} -v";;
+	-L) logfile=;;
+        -h|--help) usage -n;;
+	-m) read_arg module_list "$@" || shift $? ;;
+	-u) read_arg domu_module_list "$@" || shift $?
+	    echo "mkinitrd: DomU modules not yet supported" ;;
+        -d) read_arg rootfs "$@" || shift $?
+            dracut_args="${dracut_args} --filesystems $rootfs" ;;
+	-D) read_arg dhcp_if "$@" || shift $?
+	    dracut_cmdline="${dracut_cmdline} ip=${dhcp_if}:dhcp"
+	    ;;
+	-I) read_arg static_if "$@" || shift $?
+	    dracut_cmdline="${dracut_cmdline} ip=$(ipconfig $static_if)":
+	    ;;
+	-a) read_arg acpi_dsdt "$@" || shift $?
+	    echo "mkinitrd: custom DSDT not yet supported"
+	    exit 1
+	    ;;
+	-s) read_arg boot_splash "$@" || shift $?
+	    echo "mkinitrd: boot splash not yet supported"
+	    exit 1
+	    ;;
+	-V) echo "mkinitrd: vendor scipts are no longer supported"
+	    exit 1;;
+	--dracut)
+	    read_arg dracut_cmd "$@" || shift $? ;;
+        --version|-R)
+            echo "mkinitrd: dracut compatibility wrapper"
+            exit 0;;
+        --force) force=1;;
+	--quiet|-q) quiet=1;;
+        *)  if [[ ! $targets ]]; then
+            targets=$1
+            elif [[ ! $kernels ]]; then
+            kernels=$1
+            else
+            usage
+            fi;;
+    esac
+    shift
+done
+
+[[ $targets && $kernels ]] || default_kernel_images
+[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage)
+
+# We can have several targets/kernels, transform the list to an array
+targets=( $targets )
+[[ $kernels ]] && kernels=( $kernels )
+
+[[ $logfile ]]        && dracut_args="${dracut_args} --logfile $logfile"
+[[ $host_only == 1 ]] && dracut_args="${dracut_args} --hostonly"
+[[ $force == 1 ]]     && dracut_args="${dracut_args} --force"
+[[ $dracut_cmdline ]] && dracut_args="${dracut_args} --kernel-cmdline ${dracut_cmdline}"
+[ -z "$(type -p update-bootloader)" ] && skip_update_bootloader=1
+
+# Update defaults from /etc/sysconfig/kernel
+if [ -f /etc/sysconfig/kernel ] ; then
+    . /etc/sysconfig/kernel
+fi
+[[ $module_list ]] || module_list="${INITRD_MODULES}"
+basicmodules="$basicmodules ${module_list}"
+[[ $domu_module_list ]] || domu_module_list="${DOMU_INITRD_MODULES}"
+[[ $acpi_dsdt ]] || acpi_dsdt="${ACPI_DSDT}"
+
+echo "Creating: target|kernel|dracut args|basicmodules "
+for ((i=0 ; $i<${#targets[@]} ; i++)); do
+
+    if [[ $img_vers ]];then
+	target="${targets[$i]}-${kernels[$i]}"
+    else
+	target="${targets[$i]}"
+    fi
+    kernel="${kernels[$i]}"
+
+    # Duplicate code: No way found how to redirect output based on $quiet
+    if [[ $quiet == 1 ]];then
+	echo "$target|$kernel|$dracut_args|$basicmodules"
+	if is_xen_kernel $kernel $rootfs ; then
+	    basicmodules="$basicmodules ${domu_module_list}"
+	fi
+	if [[ $basicmodules ]]; then
+            $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel" &>/dev/null
+	else
+            $dracut_cmd $dracut_args "$target" "$kernel" &>/dev/null
+	fi
+    else
+	if is_xen_kernel $kernel $rootfs ; then
+	    basicmodules="$basicmodules ${domu_module_list}"
+	fi
+	if [[ $basicmodules ]]; then
+            $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel"
+	else
+            $dracut_cmd $dracut_args "$target" "$kernel"
+	fi
+    fi
+done
+
+if [ "$skip_update_bootloader" ] ; then
+    echo 2>&1 "Did not refresh the bootloader. You might need to refresh it manually."
+else
+    update-bootloader --refresh
+fi

mkinitrd.8.asc

@@ -41,8 +41,8 @@ OPTIONS
 
 **--preload=<module>**::
      preload the kernel module <module> in the initramfs before any other kernel
-     modules are loaded. This can be used to ensure a certain device naming, which
-     should in theory be avoided and the use of symbolic links in /dev is
+     modules are loaded. This can be used to ensure a certain device naming,
+     which should in theory be avoided and the use of symbolic links in /dev is
      encouraged.
 
 **--nocompress**::

modules.d/00bash/module-setup.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+# called by dracut
+check() {
+    [ -x /bin/bash ]
+}
+
+# called by dracut
+depends() {
+    return 0
+}
+
+# called by dracut
+install() {
+    # If another shell is already installed, do not use bash
+    [[ -x $initdir/bin/sh ]] && return
+
+    # Prefer bash as /bin/sh if it is available.
+    inst /bin/bash && ln -sf bash "${initdir}/bin/sh"
+}
+

modules.d/00bootchart/module-setup.sh

@@ -2,21 +2,24 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
     [ -x /sbin/bootchartd ] || return 1
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     inst_symlink /init /sbin/init
     inst_dir /lib/bootchart/tmpfs
 
-    dracut_install bootchartd bash \
+    inst_multiple bootchartd bash \
         /lib/bootchart/bootchart-collector /etc/bootchartd.conf \
         accton \
         echo \

modules.d/00dash/module-setup.sh

@@ -2,14 +2,17 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     [ -x /bin/dash ]
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     # If another shell is already installed, do not use dash
     [[ -x $initdir/bin/sh ]] && return

modules.d/00systemd-bootchart/module-setup.sh

@@ -0,0 +1,21 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+# called by dracut
+check() {
+    [[ "$mount_needs" ]] && return 1
+    [ -x $systemdutildir/systemd-bootchart ] || return 1
+    return 255
+}
+
+# called by dracut
+depends() {
+    return 0
+}
+
+# called by dracut
+install() {
+    inst_symlink /init /sbin/init
+    inst_multiple $systemdutildir/systemd-bootchart
+}

modules.d/01fips/fips-boot.sh

@@ -3,7 +3,7 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
-    rm -f /etc/modprobe.d/fips.conf >/dev/null 2>&1
+    rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
 elif getarg boot= >/dev/null; then
     . /sbin/fips.sh
     if mount_boot; then

modules.d/01fips/fips-noboot.sh

@@ -3,7 +3,7 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
-    rm -f /etc/modprobe.d/fips.conf >/dev/null 2>&1
+    rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
 elif ! [ -f /tmp/fipsdone ]; then
     . /sbin/fips.sh
     mount_boot

modules.d/01fips/fips.sh

@@ -15,6 +15,12 @@ mount_boot()
         UUID=*)
             boot="/dev/disk/by-uuid/${boot#UUID=}"
             ;;
+        PARTUUID=*)
+            boot="/dev/disk/by-partuuid/${boot#PARTUUID=}"
+            ;;
+        PARTLABEL=*)
+            boot="/dev/disk/by-partlabel/${boot#PARTLABEL=}"
+            ;;
         /dev/*)
             ;;
         *)
@@ -32,8 +38,6 @@ mount_boot()
                     udevadm settle --timeout=30
                 fi
                 [ -e $boot ] && break
-                modprobe scsi_wait_scan && rmmod scsi_wait_scan
-                [ -e $boot ] && break
                 sleep 0.5
                 i=$(($i+1))
                 [ $i -gt 40 ] && break
@@ -45,35 +49,76 @@ mount_boot()
         mkdir /boot
         info "Mounting $boot as /boot"
         mount -oro "$boot" /boot || return 1
+    elif [ -d "$NEWROOT/boot" ]; then
+        rm -fr -- /boot
+        ln -sf "$NEWROOT/boot" /boot
     fi
 }
 
+do_rhevh_check()
+{
+    KERNEL=$(uname -r)
+    kpath=${1}
+
+    # If we're on RHEV-H, the kernel is in /run/initramfs/live/vmlinuz0
+    HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b; do printf "%s\n" $a; done)
+    HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b; do printf "%s\n" $a; done || return 1)
+    if [ -z "$HMAC_SUM_ORIG" ] || [ -z "$HMAC_SUM_CALC" ] || [ "${HMAC_SUM_ORIG}" != "${HMAC_SUM_CALC}" ]; then
+        warn "HMAC sum mismatch"
+        return 1
+    fi
+    info "rhevh_check OK"
+    return 0
+}
+
 do_fips()
 {
-    info "Checking integrity of kernel"
-    newroot=$NEWROOT
+    local _v
+    local _s
+    local _v
+    local _module
+
     KERNEL=$(uname -r)
 
-    [ -e "$newroot/boot/.vmlinuz-${KERNEL}.hmac" ] || unset newroot
-
-    if ! [ -e "$newroot/boot/.vmlinuz-${KERNEL}.hmac" ]; then
-        warn "$newroot/boot/.vmlinuz-${KERNEL}.hmac does not exist"
+    if ! [ -e "/boot/.vmlinuz-${KERNEL}.hmac" ]; then
+        warn "/boot/.vmlinuz-${KERNEL}.hmac does not exist"
         return 1
     fi
 
-    sha512hmac -c "$newroot/boot/.vmlinuz-${KERNEL}.hmac" || return 1
-
     FIPSMODULES=$(cat /etc/fipsmodules)
 
     info "Loading and integrity checking all crypto modules"
-    for module in $FIPSMODULES; do
-        if [ "$module" != "tcrypt" ]; then
-            modprobe ${module} || return 1
+    mv /etc/modprobe.d/fips.conf /etc/modprobe.d/fips.conf.bak
+    for _module in $FIPSMODULES; do
+        if [ "$_module" != "tcrypt" ]; then
+            if ! modprobe "${_module}"; then
+                # check if kernel provides generic algo
+                _found=0
+                while read _k _s _v; do
+                    [ "$_k" != "name" -a "$_k" != "driver" ] && continue
+                    [ "$_v" != "$_module" ] && continue
+                    _found=1
+                    break
+                done </proc/crypto
+                [ "$_found" = "0" ] && return 1
+            fi
         fi
     done
+    mv /etc/modprobe.d/fips.conf.bak /etc/modprobe.d/fips.conf
+
     info "Self testing crypto algorithms"
     modprobe tcrypt || return 1
     rmmod tcrypt
+
+    info "Checking integrity of kernel"
+    if [ -e "/run/initramfs/live/vmlinuz0" ]; then
+        do_rhevh_check /run/initramfs/live/vmlinuz0 || return 1
+    elif [ -e "/run/initramfs/live/isolinux/vmlinuz0" ]; then
+        do_rhevh_check /run/initramfs/live/isolinux/vmlinuz0 || return 1
+    else
+        sha512hmac -c "/boot/.vmlinuz-${KERNEL}.hmac" || return 1
+    fi
+
     info "All initrd crypto checks done"
 
     > /tmp/fipsdone

modules.d/01fips/module-setup.sh

@@ -2,19 +2,24 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 installkernel() {
     local _fipsmodules _mod
-    _fipsmodules="aead aes_generic xts aes-x86_64 ansi_cprng cbc ccm chainiv ctr gcm ghash_generic"
-    _fipsmodules+=" des deflate ecb eseqiv hmac seqiv sha256 sha256_generic sha512 sha512_generic"
-    _fipsmodules+=" cryptomgr crypto_null tcrypt dm-mod dm-crypt"
+    _fipsmodules="aead aes_generic aes-x86_64 ansi_cprng arc4 blowfish camellia cast6 cbc ccm "
+    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod "
+    _fipsmodules+="ecb eseqiv fcrypt gcm ghash_generic hmac khazad lzo md4 md5 michael_mic rmd128 "
+    _fipsmodules+="rmd160 rmd256 rmd320 rot13 salsa20 seed seqiv serpent sha1 sha224 sha256 sha256_generic "
+    _fipsmodules+="sha384 sha512 sha512_generic tcrypt tea tnepres twofish wp256 wp384 wp512 xeta xtea xts zlib"
 
     mkdir -m 0755 -p "${initdir}/etc/modprobe.d"
 
@@ -24,21 +29,22 @@ installkernel() {
             echo "blacklist $_mod" >> "${initdir}/etc/modprobe.d/fips.conf"
         fi
     done
-    hostonly='' instmods scsi_wait_scan
 }
 
+# called by dracut
 install() {
     local _dir
     inst_hook pre-trigger 01 "$moddir/fips-boot.sh"
     inst_hook pre-pivot 01 "$moddir/fips-noboot.sh"
     inst_script "$moddir/fips.sh" /sbin/fips.sh
 
-    dracut_install sha512hmac rmmod insmod mount uname umount
+    inst_multiple sha512hmac rmmod insmod mount uname umount fipscheck
 
     inst_libdir_file libsoftokn3.so libsoftokn3.so \
         libsoftokn3.chk libfreebl3.so libfreebl3.chk \
-        'hmaccalc/sha512hmac.hmac'
+        libssl.so 'hmaccalc/sha512hmac.hmac' libssl.so.10
 
-    dracut_install -o prelink
+    inst_multiple -o prelink
+    inst_simple /etc/system-fips
 }
 

modules.d/02caps/module-setup.sh

@@ -2,14 +2,17 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     type -P capsh >/dev/null 2>&1
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     inst_hook pre-pivot 00 "$moddir/caps.sh"
     inst $(type -P capsh 2>/dev/null) /usr/sbin/capsh

modules.d/02fips-aesni/module-setup.sh

@@ -2,14 +2,17 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 installkernel() {
     local _fipsmodules _mod
     _fipsmodules="aesni-intel ghash_clmulni_intel"
@@ -24,6 +27,7 @@ installkernel() {
     done
 }
 
+# called by dracut
 install() {
     return 0
 }

modules.d/03modsign/load-modsign-keys.sh

@@ -0,0 +1,13 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Licensed under the GPLv2
+#
+# Copyright 2013 Red Hat, Inc.
+# Peter Jones <pjones@redhat.com>
+
+for x in /lib/modules/keys/* ; do
+    [ "${x}" = "/lib/modules/keys/*" ] && break
+    keyctl padd asymmetric "" @s < ${x}
+done

modules.d/03modsign/module-setup.sh

@@ -0,0 +1,40 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Licensed under the GPLv2
+#
+# Copyright 2013 Red Hat, Inc.
+# Peter Jones <pjones@redhat.com>
+
+# called by dracut
+check() {
+    [[ -x /usr/bin/keyctl ]] || return 1
+
+    # do not include module in hostonly mode,
+    # if no keys are present
+    if [[ $hostonly ]]; then
+        x=$(echo /lib/modules/keys/*)
+        [[ "${x}" = "/lib/modules/keys/*" ]] && return 255
+    fi
+
+    return 0
+}
+
+# called by dracut
+depends() {
+    return 0
+}
+
+# called by dracut
+install() {
+    inst_dir /lib/modules/keys
+    inst_binary /usr/bin/keyctl
+
+    inst_hook pre-trigger 01 "$moddir/load-modsign-keys.sh"
+
+    for x in /lib/modules/keys/* ; do
+        [[ "${x}" = "/lib/modules/keys/*" ]] && break
+        inst_simple "${x}"
+    done
+}

modules.d/03rescue/module-setup.sh

@@ -0,0 +1,22 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+# called by dracut
+check() {
+    # do not add this module by default
+    return 255
+}
+
+# called by dracut
+depends() {
+    return 0
+}
+
+# called by dracut
+install() {
+    inst_multiple -o ps grep more cat rm strace free showmount \
+        ping netstat rpcinfo vi scp ping6 ssh \
+        fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
+}
+

modules.d/04watchdog/module-setup.sh

@@ -2,14 +2,17 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     inst_hook cmdline   00 "$moddir/watchdog.sh"
     inst_hook cmdline   50 "$moddir/watchdog.sh"
@@ -23,5 +26,6 @@ install() {
     inst_hook cleanup   00 "$moddir/watchdog.sh"
     inst_hook cleanup   99 "$moddir/watchdog.sh"
     inst_hook emergency 02 "$moddir/watchdog-stop.sh"
+    inst_multiple -o wdctl
 }
 

modules.d/04watchdog/watchdog.sh

@@ -1,7 +1,12 @@
 #!/bin/sh
 if [ -e /dev/watchdog ]; then
+	if [ ! -e /tmp/watchdog_timeout ]; then
+		wdctl -s 60 /dev/watchdog >/dev/null 2>&1
+		> /tmp/watchdog_timeout
+	fi
 	info "Triggering watchdog"
 	>/dev/watchdog
 else
 	modprobe ib700wdt
+	modprobe i6300esb
 fi

modules.d/05busybox/module-setup.sh

@@ -2,20 +2,24 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     type -P busybox >/dev/null || return 1
 
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
-    local _i _progs _path
-    inst busybox /usr/bin/busybox
-    for _i in `/sbin/busybox | sed -ne '1,/Currently/!{s/,//g; s/busybox//g; p}'`
+    local _i _progs _path _busybox
+    _busybox=$(type -P busybox)
+    inst $_busybox /usr/bin/busybox
+    for _i in $($_busybox | sed -ne '1,/Currently/!{s/,//g; s/busybox//g; p}')
     do
         _progs="$_progs $_i"
     done
@@ -26,11 +30,7 @@ install() {
     for _i in $_progs; do
         _path=$(find_binary "$_i")
         [ -z "$_path" ] && continue
-        if [[ $_path != ${_path#/usr} ]]; then
-            ln -sf ../../usr/bin/busybox "$initdir/$_path"
-        else
-            ln -sf ../usr/bin/busybox "$initdir/$_path"
-        fi
+        ln_r /usr/bin/busybox $_path
     done
 }
 

modules.d/10i18n/10-console.rules

@@ -1,2 +1,2 @@
 # Console initialization - keyboard, font, etc.
-KERNEL=="tty0",		RUN+="/lib/udev/console_init $root/$name"
+KERNEL=="tty0",		RUN+="/sbin/initqueue --onetime --unique --name console_init_$name /lib/udev/console_init $root/$name"

modules.d/10i18n/README

@@ -1,4 +1,4 @@
-Dracut i18n module
+dracut i18n module
 ------------------
 
 INDEX
@@ -21,7 +21,7 @@ is intended to be generic across different GNU/Linux distributions.
 i18n and keyboard settings are stored in different files among
 distributions.  To deal with it avoiding hardcoding those differences in
 the installation script we handle it by mappings between variables used
-by Dracut and the ones in the system.  Package maintainer is expected to
+by dracut and the ones in the system.  Package maintainer is expected to
 create those for his/her distribution and it's appreciated to share it
 with us, so we can include it in source package.
 

modules.d/10i18n/console_init.sh

@@ -2,7 +2,11 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-[ -x /lib/systemd/systemd-vconsole-setup ] && exit 0
+[ -n "$DRACUT_SYSTEMD" ] && exit 0
+
+if [ -x $systemdutildir/systemd-vconsole-setup ]; then
+    $systemdutildir/systemd-vconsole-setup "$@"
+fi
 
 [ -e /etc/vconsole.conf ] && . /etc/vconsole.conf
 

modules.d/10i18n/module-setup.sh

@@ -2,19 +2,32 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
+
+    for i in setfont loadkeys kbd_mode; do
+        type -P "$i" >/dev/null || return 1
+    done
+
     return 0
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
-    [ -x /lib/systemd/systemd-vconsole-setup ] && dracut_install /lib/systemd/systemd-vconsole-setup
+    if dracut_module_included "systemd"; then
+        unset FONT
+        unset KEYMAP
+        [[ -f /etc/vconsole.conf ]] && . /etc/vconsole.conf
+    fi
+
     KBDSUBDIRS=consolefonts,consoletrans,keymaps,unimaps
-    DEFAULT_FONT=LatArCyrHeb-16
+    DEFAULT_FONT="${i18n_default_font:-LatArCyrHeb-16}"
     I18N_CONF="/etc/locale.conf"
     VCONFIG_CONF="/etc/vconsole.conf"
 
@@ -31,7 +44,7 @@ install() {
             *) cmd=grep ;;
         esac
 
-        for INCL in $($cmd "^include " $MAP | while read a a b; do echo ${a/\"/}; done); do
+        for INCL in $($cmd "^include " $MAP | while read a a b; do echo ${a//\"/}; done); do
             for FN in $(find ${kbddir}/keymaps -type f -name $INCL\*); do
                 findkeymap $FN
             done
@@ -84,11 +97,13 @@ install() {
     }
 
     install_base() {
-        dracut_install setfont loadkeys kbd_mode stty
+        inst_multiple setfont loadkeys kbd_mode stty
 
-        inst ${moddir}/console_init.sh /lib/udev/console_init
-        inst_rules ${moddir}/10-console.rules
-        inst_hook cmdline 20 "${moddir}/parse-i18n.sh"
+        if ! dracut_module_included "systemd"; then
+            inst ${moddir}/console_init.sh /lib/udev/console_init
+            inst_rules ${moddir}/10-console.rules
+            inst_hook cmdline 20 "${moddir}/parse-i18n.sh"
+        fi
     }
 
     install_all_kbd() {
@@ -96,20 +111,20 @@ install() {
 
         for _src in $(eval echo ${kbddir}/{${KBDSUBDIRS}}); do
             inst_dir "$_src"
-            cp --reflink=auto --sparse=auto -prfL -t "${initdir}/${_src%/*}" "$_src"
+            cp --reflink=auto --sparse=auto -prfL -t "${initdir}/${_src}" "$_src"/*
         done
 
         # remove unnecessary files
-        rm -f "${initdir}${kbddir}/consoletrans/utflist"
+        rm -f -- "${initdir}${kbddir}/consoletrans/utflist"
         find "${initdir}${kbddir}/" -name README\* -delete
         find "${initdir}${kbddir}/" -name '*.gz' -print -quit \
             | while read line; do
-            dracut_install gzip
+            inst_multiple gzip
             done
 
         find "${initdir}${kbddir}/" -name '*.bz2' -print -quit \
             | while read line; do
-            dracut_install bzip2
+            inst_multiple bzip2
             done
     }
 
@@ -142,6 +157,9 @@ install() {
         # Gentoo user may have KEYMAP set to something like "-u pl2",
         KEYMAP=${KEYMAP#-* }
 
+        # openSUSE user may have KEYMAP set to something like ".gz"
+        KEYMAP=${KEYMAP/.gz/}
+
         # KEYTABLE is a bit special - it defines base keymap name and UNICODE
         # determines whether non-UNICODE or UNICODE version is used
 
@@ -173,7 +191,7 @@ install() {
 
         inst_opt_decompress ${kbddir}/consolefonts/${DEFAULT_FONT}.*
 
-        if [[ ${FONT} ]]
+        if [[ ${FONT} ]] && [[ ${FONT} != ${DEFAULT_FONT} ]]
         then
             FONT=${FONT%.psf*}
             inst_opt_decompress ${kbddir}/consolefonts/${FONT}.*
@@ -191,10 +209,20 @@ install() {
             inst_simple ${kbddir}/unimaps/${FONT_UNIMAP}.uni
         fi
 
-        mksubdirs ${initdir}${I18N_CONF}
-        mksubdirs ${initdir}${VCONFIG_CONF}
-        print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
-        print_vars KEYMAP EXT_KEYMAPS UNICODE FONT FONT_MAP FONT_UNIMAP >> ${initdir}${VCONFIG_CONF}
+        if dracut_module_included "systemd" && [[ -f ${I18N_CONF} ]]; then
+            inst_simple ${I18N_CONF}
+        else
+            mksubdirs ${initdir}${I18N_CONF}
+            print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
+        fi
+
+        if dracut_module_included "systemd" && [[ -f ${VCONFIG_CONF} ]]; then
+            inst_simple ${VCONFIG_CONF}
+        else
+            mksubdirs ${initdir}${VCONFIG_CONF}
+            print_vars KEYMAP EXT_KEYMAPS UNICODE FONT FONT_MAP FONT_UNIMAP >> ${initdir}${VCONFIG_CONF}
+        fi
+
         return 0
     }
 
@@ -210,12 +238,6 @@ install() {
             kbddir=''
         done
 
-        [[ ${kbddir} ]] || {
-            derror "Directories ${KBDSUBDIRS//,/, } not found.  Please" \
-                "inform us about the issue including your OS name and version."
-            return 1
-        }
-
         [[ -f $I18N_CONF && -f $VCONFIG_CONF ]] || \
             [[ ! ${hostonly} || ${i18n_vars} ]] || {
             derror 'i18n_vars not set!  Please set up i18n_vars in ' \
@@ -224,16 +246,13 @@ install() {
         return 0
     }
 
-    if checks
-    then
+    if checks; then
         install_base
 
-        if [[ ${hostonly} ]]
-        then
+        if [[ ${hostonly} ]] && ! [[ ${i18n_install_all} ]]; then
             install_local_i18n || install_all_kbd
         else
             install_all_kbd
         fi
     fi
 }
-

modules.d/10i18n/parse-i18n.sh

@@ -6,39 +6,30 @@ inst_key_val() {
     local _value
     local _file
     local _default
-    _default=$1
-    shift
-    _file=$1
-    shift
-    _value=$(getarg $@)
+    _file="$1"; shift
+    _key="$1"; shift
+    _default="$1"; shift
+    _value="$(getarg $@)"
     [ -z "${_value}" ] && _value=$_default
     if [ -n "${_value}" ]; then
-        printf '%s="%s"\n' $1 ${_value} >> $_file
+        printf '%s="%s"\n' $key ${_value} >> $_file
     fi
     unset _file
     unset _value
 }
 
-inst_key_val '' /etc/vconsole.conf KEYMAP      vconsole.keymap      KEYTABLE
-inst_key_val '' /etc/vconsole.conf FONT        vconsole.font        SYSFONT
-inst_key_val '' /etc/vconsole.conf FONT_MAP    vconsole.font.map    CONTRANS
-inst_key_val '' /etc/vconsole.conf FONT_UNIMAP vconsole.font.unimap UNIMAP
-inst_key_val 1  /etc/vconsole.conf UNICODE     vconsole.unicode vconsole.font.unicode
-inst_key_val '' /etc/vconsole.conf EXT_KEYMAP  vconsole.keymap.ext
+inst_key_val /etc/vconsole.conf KEYMAP      '' rd.vconsole.keymap       KEYMAP      -d KEYTABLE
+inst_key_val /etc/vconsole.conf FONT        '' rd.vconsole.font         FONT        -d SYSFONT
+inst_key_val /etc/vconsole.conf FONT_MAP    '' rd.vconsole.font.map     FONT_MAP    -d CONTRANS
+inst_key_val /etc/vconsole.conf FONT_UNIMAP '' rd.vconsole.font.unimap  FONT_UNIMAP -d UNIMAP
+inst_key_val /etc/vconsole.conf UNICODE      1 rd.vconsole.font.unicode UNICODE vconsole.unicode
+inst_key_val /etc/vconsole.conf EXT_KEYMAP  '' rd.vconsole.keymap.ext   EXT_KEYMAP
 
-inst_key_val '' /etc/locale.conf   LANG        locale.LANG
-inst_key_val '' /etc/locale.conf   LC_ALL      locale.LC_ALL
+inst_key_val /etc/locale.conf   LANG        '' rd.locale.LANG           LANG
+inst_key_val /etc/locale.conf   LC_ALL      '' rd.locale.LC_ALL         LC_ALL
 
 if [ -f /etc/locale.conf ]; then
     . /etc/locale.conf
     export LANG
     export LC_ALL
 fi
-
-# FIXME: fix systemd-vconsole-setup
-#if [ -x /lib/systemd/systemd-vconsole-setup ]; then
-#    /lib/systemd/systemd-vconsole-setup
-#    rm -f /{etc,lib}/udev/rules.d/10-console.rules
-#    rm -f /lib/udev/console_init
-#    ln -s /lib/systemd/systemd-vconsole-setup /lib/udev/console_init
-#fi

modules.d/30convertfs/convertfs.sh

@@ -56,41 +56,63 @@ if ! needconvert; then
 fi
 
 testfile="$ROOT/.usrmovecheck$$"
-rm -f "$testfile"
+rm -f -- "$testfile"
 > "$testfile"
 if [[ ! -e "$testfile" ]]; then
     echo "Cannot write to $ROOT/"
     exit 1
 fi
-rm -f "$testfile"
+rm -f -- "$testfile"
 
 testfile="$ROOT/usr/.usrmovecheck$$"
-rm -f "$testfile"
+rm -f -- "$testfile"
 > "$testfile"
 if [[ ! -e "$testfile" ]]; then
     echo "Cannot write to $ROOT/usr/"
     exit 1
 fi
-rm -f "$testfile"
+rm -f -- "$testfile"
 
-ismounted() {
-    while read a m a; do
-        [[ "$m" = "$1" ]] && return 0
+find_mount() {
+    local dev mnt etc wanted_dev
+    wanted_dev="$(readlink -e -q $1)"
+    while read dev mnt etc; do
+        [ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
     done < /proc/mounts
     return 1
 }
 
+# usage: ismounted <mountpoint>
+# usage: ismounted /dev/<device>
+if command -v findmnt >/dev/null; then
+    ismounted() {
+        findmnt "$1" > /dev/null 2>&1
+    }
+else
+    ismounted() {
+        if [ -b "$1" ]; then
+            find_mount "$1" > /dev/null && return 0
+            return 1
+        fi
+
+        while read a m a; do
+            [ "$m" = "$1" ] && return 0
+        done < /proc/mounts
+        return 1
+    }
+fi
+
 # clean up after ourselves no matter how we die.
 cleanup() {
     echo "Something failed. Move back to the original state"
     for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64" \
 	"$ROOT/usr/bin" "$ROOT/usr/sbin" "$ROOT/usr/lib" \
         "$ROOT/usr/lib64"; do
-        [[ -d "${dir}.usrmove-new" ]] && rm -fr "${dir}.usrmove-new"
+        [[ -d "${dir}.usrmove-new" ]] && rm -fr -- "${dir}.usrmove-new"
         if [[ -d "${dir}.usrmove-old" ]]; then
             mv "$dir" "${dir}.del~"
             mv "${dir}.usrmove-old" "$dir"
-            rm -fr "${dir}.del~"
+            rm -fr -- "${dir}.del~"
         fi
     done
 }
@@ -104,7 +126,7 @@ set -e
 
 # merge / and /usr in new dir in /usr
 for dir in bin sbin lib lib64; do
-    rm -rf "$ROOT/usr/${dir}.usrmove-new"
+    rm -rf -- "$ROOT/usr/${dir}.usrmove-new"
     [[ -L "$ROOT/$dir" ]] && continue
     [[ -d "$ROOT/$dir" ]] || continue
     echo "Make a copy of \`$ROOT/usr/$dir'."
@@ -128,7 +150,7 @@ done
 for dir in bin sbin lib lib64; do
     [[ -d "$ROOT/usr/${dir}.usrmove-new" ]] || continue
     echo "Switch to new \`$ROOT/usr/$dir'."
-    rm -fr "$ROOT/usr/${dir}.usrmove-old"
+    rm -fr -- "$ROOT/usr/${dir}.usrmove-old"
     mv "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-old"
     mv "$ROOT/usr/${dir}.usrmove-new" "$ROOT/usr/$dir"
 done
@@ -138,7 +160,7 @@ for dir in bin sbin lib lib64; do
     [[ -L "$ROOT/$dir" ]] && continue
     [[ -d "$ROOT/$dir" ]] || continue
     echo "Create \`$ROOT/$dir' symlink."
-    rm -rf "$ROOT/${dir}.usrmove-old" || :
+    rm -fr -- "$ROOT/${dir}.usrmove-old" || :
     mv "$ROOT/$dir" "$ROOT/${dir}.usrmove-old"
     ln -sfn usr/$dir "$ROOT/$dir"
 done
@@ -156,9 +178,9 @@ done
 
 for dir in bin sbin lib lib64; do
     [[ -d "$ROOT/usr/${dir}.usrmove-old~" ]] \
-        && rm -rf "$ROOT/usr/${dir}.usrmove-old~" || :
+        && rm -rf -- "$ROOT/usr/${dir}.usrmove-old~" || :
     [[ -d "$ROOT/${dir}.usrmove-old~" ]] \
-        && rm -rf "$ROOT/${dir}.usrmove-old~" || :
+        && rm -rf -- "$ROOT/${dir}.usrmove-old~" || :
 done
 
 for dir in lib lib64; do

modules.d/30convertfs/module-setup.sh

@@ -2,17 +2,20 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     [[ $mount_needs ]] && return 1
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
-    dracut_install bash find ldconfig mv rm cp ln
+    inst_multiple bash find ldconfig mv rm cp ln
     inst_hook pre-pivot 99 "$moddir/do-convertfs.sh"
     inst_script "$moddir/convertfs.sh" /usr/bin/convertfs
 }

modules.d/40network/dhclient-script.sh

@@ -9,9 +9,10 @@ setup_interface() {
     bcast=$new_broadcast_address
     gw=${new_routers%%,*}
     domain=$new_domain_name
-    search=$(printf "$new_domain_search")
+    search=$(printf -- "$new_domain_search")
     namesrv=$new_domain_name_servers
     hostname=$new_host_name
+    lease_time=$new_dhcp_lease_time
 
     [ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override
 
@@ -25,12 +26,13 @@ setup_interface() {
         if ! ip link set $netif mtu $mtu ; then
             ip link set $netif down
             ip link set $netif mtu $mtu
-            ip link set $netif up
-            wait_for_if_up $netif
+            linkup $netif
         fi
     fi
 
-    ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} dev $netif
+    ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} \
+        valid_lft ${lease_time} preferred_lft ${lease_time} \
+        dev $netif
 
     [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
 
@@ -43,14 +45,15 @@ setup_interface() {
 
     # Note: hostname can be fqdn OR short hostname, so chop off any
     # trailing domain name and explicity add any domain if set.
-    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
+    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 }
 
 PATH=/usr/sbin:/usr/bin:/sbin:/bin
 
 export PS4="dhclient.$interface.$$ + "
-exec >>/run/initramfs/loginit.pipe 2>>/run/initramfs/loginit.pipe
+[ -e /run/initramfs/loginit.pipe ] && exec >>/run/initramfs/loginit.pipe 2>>/run/initramfs/loginit.pipe
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
 
 # We already need a set netif here
 netif=$interface
@@ -61,8 +64,7 @@ netif=$interface
 case $reason in
     PREINIT)
         echo "dhcp: PREINIT $netif up"
-        ip link set $netif up
-        wait_for_if_up $netif
+        linkup $netif
         ;;
     BOUND)
         echo "dhcp: BOND setting $netif"
@@ -89,7 +91,8 @@ case $reason in
             echo "source_hook initqueue/online $netif"
             [ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
             echo "> /tmp/setup_net_$netif.ok"
-            echo "rm -f $hookdir/initqueue/setup_net_$netif.sh"
+            echo "> /tmp/setup_net_\$(cat /sys/class/net/$netif/address).ok"
+            echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
         } > $hookdir/initqueue/setup_net_$netif.sh
 
         echo "[ -f /tmp/setup_net_$netif.ok ]" > $hookdir/initqueue/finished/dhclient-$netif.sh

modules.d/40network/dhcp-root.sh

@@ -2,20 +2,24 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-# Don't continue if root is ok
-[ -n "$rootok" ] && return
-
 # This script is sourced, so root should be set. But let's be paranoid
 [ -z "$root" ] && root=$(getarg root=)
-[ -z "$netroot" ] && netroot=$(getarg netroot=)
 
-if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] ; then
+if [ -z "$netroot" ]; then
+    for netroot in $(getargs netroot=); do
+        [ "$netroot" = "dhcp" ] && break
+        [ "$netroot" = "dhcp6" ] && break
+    done
+    [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] || unset netroot
+fi
+
+if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ]; then
     # Tell ip= checker that we need dhcp
     NEEDDHCP="1"
 
     # Done, all good!
     rootok=1
-    if [ "$netroot" != "dhcp" ] ; then
+    if [ "$netroot" != "dhcp" ] && [ "$netroot" != "dhcp6" ]; then
         netroot=$root
     fi
 

modules.d/40network/ifup.sh

@@ -17,27 +17,28 @@ type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
 
 # $netif reads easier than $1
 netif=$1
+use_bridge='false'
+use_vlan='false'
 
 # enslave this interface to bond?
-if [ -e /tmp/bond.info ]; then
-    . /tmp/bond.info
+for i in /tmp/bond.*.info; do
+    [ -e "$i" ] || continue
+    unset bondslaves
+    unset bondname
+    . "$i"
     for slave in $bondslaves ; do
         if [ "$netif" = "$slave" ] ; then
             netif=$bondname
+            break 2
         fi
     done
-fi
+done
 
-# bridge this interface?
-if [ -e /tmp/bridge.info ]; then
-    . /tmp/bridge.info
-    for ethname in $ethnames ; do
-        if [ "$netif" = "$ethname" ]; then
-            if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then
-                : # We need to really setup bond (recursive call)
-            else
-                netif="$bridgename"
-            fi
+if [ -e /tmp/team.info ]; then
+    . /tmp/team.info
+    for slave in $teamslaves ; do
+        if [ "$netif" = "$slave" ] ; then
+            netif=$teammaster
         fi
     done
 fi
@@ -47,12 +48,34 @@ if [ -e /tmp/vlan.info ]; then
     if [ "$netif" = "$phydevice" ]; then
         if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then
             : # We need to really setup bond (recursive call)
+        elif [ "$netif" = "$teammaster" ] && [ -n "$DO_TEAM_SETUP" ] ; then
+            : # We need to really setup team (recursive call)
         else
             netif="$vlanname"
+            use_vlan='true'
         fi
     fi
 fi
 
+# bridge this interface?
+if [ -e /tmp/bridge.info ]; then
+    . /tmp/bridge.info
+    for ethname in $ethnames ; do
+        if [ "$netif" = "$ethname" ]; then
+            if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then
+                : # We need to really setup bond (recursive call)
+            elif [ "$netif" = "$teammaster" ] && [ -n "$DO_TEAM_SETUP" ] ; then
+                : # We need to really setup team (recursive call)
+            elif [ "$netif" = "$vlanname" ] && [ -n "$DO_VLAN_SETUP" ]; then
+                : # We need to really setup vlan (recursive call)
+            else
+                netif="$bridgename"
+                use_bridge='true'
+            fi
+        fi
+    done
+fi
+
 # disable manual ifup while netroot is set for simplifying our logic
 # in netroot case we prefer netroot to bringup $netif automaticlly
 [ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2"
@@ -64,6 +87,10 @@ do_dhcp() {
     # dhclient-script will mark the netif up and generate the online
     # event for nfsroot
     # XXX add -V vendor class and option parsing per kernel
+    if ! iface_has_link $netif; then
+        echo "No carrier detected"
+        return 1
+    fi
     echo "Starting dhcp for interface $netif"
     dhclient "$@" -1 -q -cf /etc/dhclient.conf -pf /tmp/dhclient.$netif.pid -lf /tmp/dhclient.$netif.lease $netif \
         || echo "dhcp failed"
@@ -84,44 +111,34 @@ do_ipv6auto() {
     echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding
     echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
     echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
-    ip link set $netif up
-    wait_for_if_up $netif
+    linkup $netif
+    wait_for_ipv6_auto $netif
 
     [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 
-    namesrv=$(getargs nameserver)
-    if  [ -n "$namesrv" ] ; then
-        for s in $namesrv; do
-            echo nameserver $s
-        done
-    fi >> /tmp/net.$netif.resolv.conf
+    return 0
 }
 
 # Handle static ip configuration
 do_static() {
     strstr $ip '*:*:*' && load_ipv6
 
-    ip link set $netif up
-    wait_for_if_up $netif
-    [ -n "$macaddr" ] && ip link set address $macaddr
-    [ -n "$mtu" ] && ip link set mtu $mtu
+    linkup $netif
+    [ -n "$macaddr" ] && ip link set address $macaddr dev $netif
+    [ -n "$mtu" ] && ip link set mtu $mtu dev $netif
     if strstr $ip '*:*:*'; then
         # note no ip addr flush for ipv6
-        ip addr add $ip/$mask dev $netif
+        ip addr add $ip/$mask ${srv:+peer $srv} dev $netif
     else
         ip addr flush dev $netif
-        ip addr add $ip/$mask brd + dev $netif
+        ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif
     fi
 
     [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
     [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 
-    namesrv=$(getargs nameserver)
-    if  [ -n "$namesrv" ] ; then
-        for s in $namesrv; do
-            echo nameserver $s
-        done
-    fi >> /tmp/net.$netif.resolv.conf
+    > /tmp/setup_net_${netif}.ok
+    return 0
 }
 
 # loopback is always handled the same way
@@ -132,11 +149,12 @@ if [ "$netif" = "lo" ] ; then
 fi
 
 # start bond if needed
-if [ -e /tmp/bond.info ]; then
-    . /tmp/bond.info
+if [ -e /tmp/bond.${netif}.info ]; then
+    . /tmp/bond.${netif}.info
 
     if [ "$netif" = "$bondname" ] && [ ! -e /tmp/net.$bondname.up ] ; then # We are master bond device
         modprobe bonding
+        echo "+$netif" >  /sys/class/net/bonding_masters
         ip link set $netif down
 
         # Stolen from ifup-eth
@@ -157,13 +175,12 @@ if [ -e /tmp/bond.info ]; then
             fi
         done
 
-        ip link set $netif up
+        linkup $netif
 
         for slave in $bondslaves ; do
             ip link set $slave down
             echo "+$slave" > /sys/class/net/$bondname/bonding/slaves
-            ip link set $slave up
-            wait_for_if_up $slave
+            linkup $slave
         done
 
         # add the bits to setup the needed post enslavement parameters
@@ -177,6 +194,28 @@ if [ -e /tmp/bond.info ]; then
     fi
 fi
 
+if [ -e /tmp/team.info ]; then
+    . /tmp/team.info
+    if [ "$netif" = "$teammaster" ] && [ ! -e /tmp/net.$teammaster.up ] ; then
+        # We shall only bring up those _can_ come up
+        # in case of some slave is gone in active-backup mode
+        working_slaves=""
+        for slave in $teamslaves ; do
+            ip link set $slave up 2>/dev/null
+            if wait_for_if_up $slave; then
+                working_slaves+="$slave "
+            fi
+        done
+        # Do not add slaves now
+        teamd -d -U -n -t $teammaster -f /etc/teamd/$teammaster.conf
+        for slave in $working_slaves; do
+            # team requires the slaves to be down before joining team
+            ip link set $slave down
+            teamdctl $teammaster port add $slave
+        done
+        ip link set $teammaster up
+    fi
+fi
 
 # XXX need error handling like dhclient-script
 
@@ -189,10 +228,13 @@ if [ -e /tmp/bridge.info ]; then
         for ethname in $ethnames ; do
             if [ "$ethname" = "$bondname" ] ; then
                 DO_BOND_SETUP=yes ifup $bondname -m
+            elif [ "$ethname" = "$teammaster" ] ; then
+                DO_TEAM_SETUP=yes ifup $teammaster -m
+            elif [ "$ethname" = "$vlanname" ]; then
+                DO_VLAN_SETUP=yes ifup $vlanname -m
             else
-                ip link set $ethname up
+                linkup $ethname
             fi
-            wait_for_if_up $ethname
             brctl addif $bridgename $ethname
         done
     fi
@@ -201,10 +243,10 @@ fi
 get_vid() {
     case "$1" in
     vlan*)
-        return ${1#vlan}
+        echo ${1#vlan}
         ;;
     *.*)
-        return ${1##*.}
+        echo ${1##*.}
         ;;
     esac
 }
@@ -213,13 +255,23 @@ if [ "$netif" = "$vlanname" ] && [ ! -e /tmp/net.$vlanname.up ]; then
     modprobe 8021q
     if [ "$phydevice" = "$bondname" ] ; then
         DO_BOND_SETUP=yes ifup $phydevice -m
+    elif [ "$phydevice" = "$teammaster" ] ; then
+        DO_TEAM_SETUP=yes ifup $phydevice -m
     else
-        ip link set "$phydevice" up
+        linkup "$phydevice"
     fi
-    wait_for_if_up "$phydevice"
-    ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname; echo $?)"
+    ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname)"
+    ip link set "$vlanname" up
 fi
 
+# setup nameserver
+namesrv=$(getargs nameserver)
+if  [ -n "$namesrv" ] ; then
+    for s in $namesrv; do
+        echo nameserver $s
+    done
+fi >> /tmp/net.$netif.resolv.conf
+
 # No ip lines default to dhcp
 ip=$(getarg ip)
 
@@ -231,6 +283,7 @@ if [ -z "$ip" ]; then
     fi
 fi
 
+
 # Specific configuration, spin through the kernel command line
 # looking for ip= lines
 for p in $(getargs ip=); do
@@ -238,8 +291,21 @@ for p in $(getargs ip=); do
     # skip ibft
     [ "$autoconf" = "ibft" ] && continue
 
+    case "$dev" in
+        ??:??:??:??:??:??)  # MAC address
+            _dev=$(iface_for_mac $dev)
+            [ -n "$_dev" ] && dev="$_dev"
+            ;;
+        ??-??-??-??-??-??)  # MAC address in BOOTIF form
+            _dev=$(iface_for_mac $(fix_bootif $dev))
+            [ -n "$_dev" ] && dev="$_dev"
+            ;;
+    esac
+
     # If this option isn't directed at our interface, skip it
-    [ -n "$dev" ] && [ "$dev" != "$netif" ] && continue
+    [ -n "$dev" ] && [ "$dev" != "$netif" ] && \
+    [ "$use_bridge" != 'true' ] && \
+    [ "$use_vlan" != 'true' ] && continue
 
     # Store config for later use
     for i in ip srv gw mask hostname macaddr; do
@@ -271,6 +337,19 @@ for p in $(getargs ip=); do
             ;;
     esac
 
-    break
+    exit 0
 done
+
+# netif isn't the top stack? Then we should exit here.
+# eg. netif is bond0. br0 is on top of it. dhcp br0 is correct but dhcp
+#     bond0 doesn't make sense.
+if [ -n "$DO_BOND_SETUP" -o -n "$DO_TEAM_SETUP" -o -n "$DO_VLAN_SETUP" ]; then
+    exit 0
+fi
+
+# no ip option directed at our interface?
+if [ ! -e /tmp/setup_net_${netif}.ok ]; then
+    do_dhcp -4
+fi
+
 exit 0

modules.d/40network/module-setup.sh

@@ -2,6 +2,7 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     local _program
 
@@ -15,17 +16,18 @@ check() {
     return 255
 }
 
+# called by dracut
 depends() {
-    [ -d /etc/sysconfig/network-scripts/ ] && echo ifcfg
     return 0
 }
 
+# called by dracut
 installkernel() {
     # Include wired net drivers, excluding wireless
 
     net_module_filter() {
-        local _net_drivers='eth_type_trans|register_virtio_device'
-        local _unwanted_drivers='/(wireless|isdn|uwb)/'
+        local _net_drivers='eth_type_trans|register_virtio_device|usbnet_open'
+        local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
         local _ret
         # subfunctions inherit following FDs
         local _merge=8 _side2=9
@@ -64,21 +66,22 @@ installkernel() {
     { find_kernel_modules_by_path drivers/net; if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then find_kernel_modules_by_path drivers/s390/net; fi; } \
         | net_module_filter | instmods
 
-    instmods =drivers/net/phy
-    instmods ecb arc4
-    # bridge modules
-    instmods bridge stp llc
-    instmods ipv6
-    # bonding
-    instmods bonding
-    # vlan
-    instmods 8021q
+    #instmods() will take care of hostonly
+    instmods \
+        =drivers/net/phy \
+        =drivers/net/team \
+        =drivers/net/ethernet \
+        ecb arc4 bridge stp llc ipv6 bonding 8021q af_packet virtio_net
 }
 
+# called by dracut
 install() {
     local _arch _i _dir
-    dracut_install ip arping dhclient sed
-    dracut_install -o brctl
+    inst_multiple ip arping dhclient sed
+    inst_multiple -o ping ping6
+    inst_multiple -o brctl
+    inst_multiple -o teamd teamdctl teamnl
+    inst_simple /etc/libnl/classid
     inst_script "$moddir/ifup.sh" "/sbin/ifup"
     inst_script "$moddir/netroot.sh" "/sbin/netroot"
     inst_script "$moddir/dhclient-script.sh" "/sbin/dhclient-script"
@@ -87,8 +90,10 @@ install() {
     inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
     inst_hook pre-udev 60 "$moddir/net-genrules.sh"
     inst_hook cmdline 91 "$moddir/dhcp-root.sh"
+    inst_hook cmdline 92 "$moddir/parse-ibft.sh"
     inst_hook cmdline 95 "$moddir/parse-vlan.sh"
     inst_hook cmdline 96 "$moddir/parse-bond.sh"
+    inst_hook cmdline 96 "$moddir/parse-team.sh"
     inst_hook cmdline 97 "$moddir/parse-bridge.sh"
     inst_hook cmdline 98 "$moddir/parse-ip-opts.sh"
     inst_hook cmdline 99 "$moddir/parse-ifname.sh"
@@ -98,5 +103,7 @@ install() {
 
     inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \
         {"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*"
+
+    dracut_need_initqueue
 }
 

modules.d/40network/net-genrules.sh

@@ -2,59 +2,103 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-# pxelinux provides macaddr '-' separated, but we need ':'
-fix_bootif() {
-    local macaddr=${1}
-    local IFS='-'
-    macaddr=$(for i in ${macaddr} ; do echo -n $i:; done)
-    macaddr=${macaddr%:}
-    # strip hardware type field from pxelinux
-    [ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:}
-    # return macaddr with lowercase alpha characters expected by udev
-    echo $macaddr | sed 'y/ABCDEF/abcdef/'
-}
+getargbool 0 rd.neednet && NEEDNET=1
 
 # Don't continue if we don't need network
-[ -z "$netroot" ] && ! [ -e "/tmp/net.ifaces" ] && return;
+if [ -z "$netroot" ] && [ ! -e "/tmp/net.ifaces" ] && [ "$NEEDNET" != "1" ]; then
+    return
+fi
+
+command -v fix_bootif >/dev/null || . /lib/net-lib.sh
 
 # Write udev rules
 {
     # bridge: attempt only the defined interface
     if [ -e /tmp/bridge.info ]; then
         . /tmp/bridge.info
-        IFACES+=" ${ethnames%% *}"
+        IFACES="$IFACES ${ethnames%% *}"
+        MASTER_IFACES="$MASTER_IFACES $bridgename"
     fi
 
     # bond: attempt only the defined interface (override bridge defines)
-    if [ -e /tmp/bond.info ]; then
-        . /tmp/bond.info
+    for i in /tmp/bond.*.info; do
+        [ -e "$i" ] || continue
+        unset bondslaves
+        unset bondname
+        . "$i"
         # It is enough to fire up only one
-        IFACES+=" ${bondslaves%% *}"
+        IFACES="$IFACES ${bondslaves%% *}"
+        MASTER_IFACES="$MASTER_IFACES ${bondname}"
+    done
+
+    if [ -e /tmp/team.info ]; then
+        . /tmp/team.info
+        IFACES="$IFACES ${teamslaves}"
+        MASTER_IFACES="$MASTER_IFACES ${teammaster}"
     fi
 
     if [ -e /tmp/vlan.info ]; then
         . /tmp/vlan.info
-        IFACES+=" $phydevice"
+        IFACES="$IFACES $phydevice"
+        MASTER_IFACES="$MASTER_IFACES ${vlanname}"
+    fi
+
+    if [ -z "$IFACES" ]; then
+        [ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces
+    fi
+
+    if [ -e /tmp/net.bootdev ]; then
+        bootdev=$(cat /tmp/net.bootdev)
     fi
 
     ifup='/sbin/ifup $env{INTERFACE}'
     [ -z "$netroot" ] && ifup="$ifup -m"
 
-    # BOOTIF says everything, use only that one
-    BOOTIF=$(getarg 'BOOTIF=')
-    if [ -n "$BOOTIF" ] ; then
-        BOOTIF=$(fix_bootif "$BOOTIF")
-        printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="%s"\n' "$BOOTIF" "/sbin/initqueue --onetime $ifup"
+    runcmd="RUN+=\"/sbin/initqueue --name ifup-\$env{INTERFACE} --unique --onetime $ifup\""
 
-    # If we have to handle multiple interfaces, handle only them.
-    elif [ -n "$IFACES" ] ; then
-        for iface in $IFACES ; do
-            printf 'SUBSYSTEM=="net", ENV{INTERFACE}=="%s", RUN+="%s"\n' "$iface" "/sbin/initqueue --onetime $ifup"
+    # We have some specific interfaces to handle
+    if [ -n "$IFACES" ]; then
+        echo 'SUBSYSTEM!="net", GOTO="net_end"'
+        echo 'ACTION!="add|change|move", GOTO="net_end"'
+        for iface in $IFACES; do
+            case "$iface" in
+                ??:??:??:??:??:??)  # MAC address
+                    cond="ATTR{address}==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
+                ??-??-??-??-??-??)  # MAC address in BOOTIF form
+                    cond="ATTR{address}==\"$(fix_bootif $iface)\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
+                *)                  # an interface name
+                    cond="ENV{INTERFACE}==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    cond="NAME==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
+            esac
+            # The GOTO prevents us from trying to ifup the same device twice
         done
+        echo 'LABEL="net_end"'
 
+        if [ -n "$MASTER_IFACES" ]; then
+            wait_ifaces=$MASTER_IFACES
+        else
+            wait_ifaces=$IFACES
+        fi
+
+        for iface in $wait_ifaces; do
+            if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then
+                echo "[ -f /tmp/setup_net_${iface}.ok ]" >$hookdir/initqueue/finished/wait-$iface.sh
+            fi
+        done
     # Default: We don't know the interface to use, handle all
+    # Fixme: waiting for the interface as well.
     else
-        printf 'SUBSYSTEM=="net", RUN+="%s"\n' "/sbin/initqueue --onetime $ifup" > /etc/udev/rules.d/91-default-net.rules
+        cond='ACTION=="add", SUBSYSTEM=="net"'
+        # if you change the name of "91-default-net.rules", also change modules.d/80cms/cmssetup.sh
+        echo "$cond, $runcmd" > /etc/udev/rules.d/91-default-net.rules
     fi
 
+# if you change the name of "90-net.rules", also change modules.d/80cms/cmssetup.sh
 } > /etc/udev/rules.d/90-net.rules

modules.d/40network/net-lib.sh

@@ -1,4 +1,6 @@
 #!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 get_ip() {
     local iface="$1" ip=""
@@ -12,6 +14,11 @@ iface_for_remote_addr() {
     echo $5
 }
 
+iface_for_ip() {
+    set -- $(ip -o addr show to $1)
+    echo $2
+}
+
 iface_for_mac() {
     local interface="" mac="$(echo $1 | sed 'y/ABCDEF/abcdef/')"
     for interface in /sys/class/net/*; do
@@ -21,15 +28,30 @@ iface_for_mac() {
     done
 }
 
-iface_has_link() {
-    local interface="$1" flags=""
-    [ -n "$interface" ] || return 2
-    interface="/sys/class/net/$interface"
-    [ -d "$interface" ] || return 2
-    flags=$(cat $interface/flags)
-    echo $(($flags|0x41)) > $interface/flags # 0x41: IFF_UP|IFF_RUNNING
-    [ "$(cat $interface/carrier)" = 1 ] || return 1
-    # XXX Do we need to reset the flags here? anaconda never bothered..
+# get the iface name for the given identifier - either a MAC, IP, or iface name
+iface_name() {
+    case $1 in
+        ??:??:??:??:??:??|??-??-??-??-??-??) iface_for_mac $1 ;;
+        *:*:*|*.*.*.*) iface_for_ip $1 ;;
+        *) echo $1 ;;
+    esac
+}
+
+# list the configured interfaces
+configured_ifaces() {
+    local IFACES="" iface_id="" rv=1
+    [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
+    if { pidof udevd || pidof systemd-udevd; } > /dev/null; then
+        for iface_id in $IFACES; do
+            echo $(iface_name $iface_id)
+            rv=0
+        done
+    else
+        warn "configured_ifaces called before udev is running"
+        echo $IFACES
+        [ -n "$IFACES" ] && rv=0
+    fi
+    return $rv
 }
 
 all_ifaces_up() {
@@ -59,7 +81,7 @@ ifdown() {
     ip link set $netif down
     ip addr flush dev $netif
     echo "#empty" > /etc/resolv.conf
-    rm -f /tmp/net.$netif.did-setup
+    rm -f -- /tmp/net.$netif.did-setup
     # TODO: send "offline" uevent?
 }
 
@@ -126,41 +148,93 @@ save_netinfo() {
 }
 
 set_ifname() {
-    local name="$1" mac="$2" num=0 n=""
+    local name="$1" mac="$2" num=-1 n=""
     # if it's already set, return the existing name
     for n in $(getargs ifname=); do
         strstr "$n" "$mac" && echo ${n%%:*} && return
     done
     # otherwise, pick a new name and use that
-    while [ -e /sys/class/$name$num ]; do num=$(($num+1)); done
+    while :; do
+        num=$(($num+1));
+        [ -e /sys/class/net/$name$num ] && continue
+        for n in $(getargs ifname=); do
+            [ "$name$num" = "${n%%:*}" ] && continue 2
+        done
+        break
+    done
     echo "ifname=$name$num:$mac" >> /etc/cmdline.d/45-ifname.conf
     echo "$name$num"
 }
 
+# pxelinux provides macaddr '-' separated, but we need ':'
+fix_bootif() {
+    local macaddr=${1}
+    local IFS='-'
+    macaddr=$(for i in ${macaddr} ; do echo -n $i:; done)
+    macaddr=${macaddr%:}
+    # strip hardware type field from pxelinux
+    [ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:}
+    # return macaddr with lowercase alpha characters expected by udev
+    echo $macaddr | sed 'y/ABCDEF/abcdef/'
+}
+
 ibft_to_cmdline() {
-    local iface="" mac="" dev=""
-    local dhcp="" ip="" gw="" mask="" hostname=""
+    local iface=""
     modprobe -q iscsi_ibft
     (
         for iface in /sys/firmware/ibft/ethernet*; do
+            local mac="" dev=""
+            local dhcp="" ip="" gw="" mask="" hostname=""
+
             [ -e ${iface}/mac ] || continue
             mac=$(read a < ${iface}/mac; echo $a)
-            [ -z "$ifname_mac" ] && continue
-            dev=$(set_ifname ibft $ifname_mac)
-            dhcp=$(read a < ${iface}/dhcp; echo $a)
+            [ -z "$mac" ] && continue
+            dev=$(set_ifname ibft $mac)
+
+            [ -e /tmp/net.${dev}.has_ibft_config ] && continue
+
+            [ -e ${iface}/dhcp ] && dhcp=$(read a < ${iface}/dhcp; echo $a)
+
             if [ -n "$dhcp" ]; then
                 echo "ip=$dev:dhcp"
+            elif [ -e ${iface}/ip-addr ]; then
+                [ -e ${iface}/ip-addr ] && ip=$(read a < ${iface}/ip-addr; echo $a)
+                # skip not assigned ip adresses
+                [ "$ip" = "0.0.0.0" ] && continue
+                [ -e ${iface}/gateway ] && gw=$(read a < ${iface}/gateway; echo $a)
+                [ -e ${iface}/subnet-mask ] && mask=$(read a < ${iface}/subnet-mask; echo $a)
+                [ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a)
+                if [ -n "$ip" ] && [ -n "$mask" ]; then
+                    echo "ip=$ip::$gw:$mask:$hostname:$dev:none"
+                else
+                    warn "${iface} does not contain a valid iBFT configuration"
+                    warn "ip-addr=$ip"
+                    warn "gateway=$gw"
+                    warn "subnet-mask=$mask"
+                    warn "hostname=$hostname"
+                fi
             else
-                ip=$(read a < ${iface}/ip-addr; echo $a)
-                gw=$(read a < ${iface}/gateway; echo $a)
-                mask=$(read a < ${iface}/subnet-mask; echo $a)
-                hostname=$(read a < ${iface}/hostname; echo $a)
-                echo "ip=$ip::$gw:$mask:$hostname:$dev:none"
+                info "${iface} does not contain a valid iBFT configuration"
+                ls -l ${iface} | vinfo
             fi
+
+            if [ -e ${iface}/vlan ]; then
+               vlan=$(read a < ${iface}/vlan; echo $a)
+               if [ "$vlan" -ne "0" ]; then
+                   case "$vlan" in
+                       [0-9]*)
+                           echo "vlan=$dev.$vlan:$dev"
+                           ;;
+                       *)
+                           echo "vlan=$vlan:$dev"
+                           ;;
+                   esac
+               fi
+            fi
+
+            echo $mac > /tmp/net.${dev}.has_ibft_config
         done
     ) >> /etc/cmdline.d/40-ibft.conf
-    # reread cmdline
-    unset CMDLINE
 }
 
 parse_iscsi_root()
@@ -269,12 +343,20 @@ ip_to_var() {
     case $# in
         0)  autoconf="error" ;;
         1)  autoconf=$1 ;;
-        2)  dev=$1; autoconf=$2 ;;
-        3)  dev=$1; autoconf=$2; mtu=$3 ;;
-        4)  dev=$1; autoconf=$2; mtu=$3; macaddr=$4 ;;
-        *)  ip=$1; srv=$2; gw=$3; mask=$4; hostname=$5; dev=$6; autoconf=$7; mtu=$8; macaddr=$9 ;;
+        2)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2 ;;
+        3)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2; [ -n "$3" ] && mtu=$3 ;;
+        4)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2; [ -n "$3" ] && mtu=$3; [ -n "$4" ] && macaddr=$4 ;;
+        *)  [ -n "$1" ] && ip=$1; [ -n "$2" ] && srv=$2; [ -n "$3" ] && gw=$3; [ -n "$4" ] && mask=$4;
+            [ -n "$5" ] && hostname=$5; [ -n "$6" ] && dev=$6; [ -n "$7" ] && autoconf=$7; [ -n "$8" ] && mtu=$8;
+            if [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
+                macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
+            fi
+	    ;;
     esac
-    # anaconda-style argument cluster
+
+    # ip=<ipv4-address> means anaconda-style static config argument cluster:
+    # ip=<ip> gateway=<gw> netmask=<nm> hostname=<host> mtu=<mtu>
+    # ksdevice={link|bootif|ibft|<MAC>|<ifname>}
     if strstr "$autoconf" "*.*.*.*"; then
         ip="$autoconf"
         gw=$(getarg gateway=)
@@ -283,9 +365,12 @@ ip_to_var() {
         dev=$(getarg ksdevice=)
         autoconf="none"
         mtu=$(getarg mtu=)
+
+        # handle special values for ksdevice
         case "$dev" in
-            # ignore fancy values for ksdevice=XXX
-            link|bootif|BOOTIF|ibft|*:*:*:*:*:*) dev="" ;;
+            bootif|BOOTIF) dev=$(fix_bootif $(getarg BOOTIF=)) ;;
+            link) dev="" ;; # FIXME: do something useful with this
+            ibft) dev="" ;; # ignore - ibft is handled elsewhere
         esac
     fi
 }
@@ -315,3 +400,85 @@ parse_ifname_opts() {
     esac
 
 }
+
+# some network driver need long time to initialize, wait before it's ready.
+wait_for_if_link() {
+    local cnt=0
+    local li
+    while [ $cnt -lt 600 ]; do
+        li=$(ip -o link show dev $1 2>/dev/null)
+        [ -n "$li" ] && return 0
+        sleep 0.1
+        cnt=$(($cnt+1))
+    done
+    return 1
+}
+
+wait_for_if_up() {
+    local cnt=0
+    local li
+    while [ $cnt -lt 200 ]; do
+        li=$(ip -o link show up dev $1)
+        [ -n "$li" ] && [ -z "${li##*state UP*}" ] && return 0
+        sleep 0.1
+        cnt=$(($cnt+1))
+    done
+    return 1
+}
+
+wait_for_route_ok() {
+    local cnt=0
+    while [ $cnt -lt 200 ]; do
+        li=$(ip route show)
+        [ -n "$li" ] && [ -z "${li##*$1*}" ] && return 0
+        sleep 0.1
+        cnt=$(($cnt+1))
+    done
+    return 1
+}
+
+wait_for_ipv6_auto() {
+    local cnt=0
+    local li
+    while [ $cnt -lt 400 ]; do
+        li=$(ip -6 addr show dev $1)
+        strstr "$li" "dynamic" && return 0
+        sleep 0.1
+        cnt=$(($cnt+1))
+    done
+    return 1
+}
+
+linkup() {
+    wait_for_if_link $1 2>/dev/null\
+     && ip link set $1 up 2>/dev/null\
+     && wait_for_if_up $1 2>/dev/null
+}
+
+type hostname >/dev/null 2>&1 || \
+hostname() {
+	cat /proc/sys/kernel/hostname
+}
+
+iface_has_link() {
+    local interface="$1" flags=""
+    [ -n "$interface" ] || return 2
+    interface="/sys/class/net/$interface"
+    [ -d "$interface" ] || return 2
+    linkup "$1"
+    [ "$(cat $interface/carrier)" = 1 ] || return 1
+    # XXX Do we need to reset the flags here? anaconda never bothered..
+}
+
+find_iface_with_link() {
+    local iface_path="" iface=""
+    for iface_path in /sys/class/net/*; do
+        iface=${iface_path##*/}
+        str_starts "$iface" "lo" && continue
+        if iface_has_link $iface; then
+            echo "$iface"
+            return 0
+        fi
+    done
+    return 1
+}

modules.d/40network/netroot.sh

@@ -20,13 +20,22 @@ command -v setup_net >/dev/null || . /lib/net-lib.sh
 netif=$1
 [ -e "/tmp/net.bootdev" ] && read netif < /tmp/net.bootdev
 
+case "$netif" in
+    ??:??:??:??:??:??)  # MAC address
+        for i in /sys/class/net/*/address; do
+            mac=$(cat $i)
+            if [ "$mac" = "$netif" ]; then
+                i=${i%/address}
+                netif=${i##*/}
+                break
+            fi
+        done
+esac
+
 # Figure out the handler for root=dhcp by recalling all netroot cmdline
 # handlers when this is not called from manually network bringing up.
 if [ -z "$2" ]; then
     if [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] ; then
-        # Unset root so we can check later
-        unset root
-
         # Load dhcp options
         [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
 
@@ -42,6 +51,7 @@ if [ -z "$2" ]; then
         netroot=$new_root_path
 
         # FIXME!
+        unset rootok
         for f in $hookdir/cmdline/90*.sh; do
             [ -f "$f" ] && . "$f";
         done
@@ -67,6 +77,7 @@ source_hook netroot $netif
 # Run the handler; don't store the root, it may change from device to device
 # XXX other variables to export?
 if $handler $netif $netroot $NEWROOT; then
+    rm -f -- $hookdir/initqueue/finished/dhcp.sh
     # Network rootfs mount successful - save interface info for ifcfg etc.
     save_netinfo $netif
 fi

modules.d/40network/parse-bond.sh

@@ -54,8 +54,8 @@ if getarg bond >/dev/null; then
     fi
     # Make it suitable for initscripts export
     bondoptions=$(str_replace "$bondoptions" ";" ",")
-    echo "bondname=$bondname" > /tmp/bond.info
-    echo "bondslaves=\"$bondslaves\"" >> /tmp/bond.info
-    echo "bondoptions=\"$bondoptions\"" >> /tmp/bond.info
+    echo "bondname=$bondname" > /tmp/bond.${bondname}.info
+    echo "bondslaves=\"$bondslaves\"" >> /tmp/bond.${bondname}.info
+    echo "bondoptions=\"$bondoptions\"" >> /tmp/bond.${bondname}.info
     return
 fi

modules.d/40network/parse-bridge.sh

@@ -37,12 +37,6 @@ parsebridge() {
 unset bridgename ethnames
 
 iface=eth0
-if [ -e /tmp/bond.info ]; then
-    . /tmp/bond.info
-    if [ -n "$bondname" ] ; then
-        iface=$bondname
-    fi
-fi
 
 # Parse bridge for bridgename and ethnames
 if bridge="$(getarg bridge)"; then

modules.d/40network/parse-ibft.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+command -v getarg >/dev/null          || . /lib/dracut-lib.sh
+command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
+
+# If ibft is requested, read ibft vals and write ip=XXX cmdline args
+[ "ibft" = "$(getarg ip=)" ] && ibft_to_cmdline
+

modules.d/40network/parse-ip-opts.sh

@@ -15,16 +15,8 @@
 #
 
 command -v getarg >/dev/null          || . /lib/dracut-lib.sh
-command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
 
-# Don't mix BOOTIF=macaddr from pxelinux and ip= lines
-getarg ip= >/dev/null && getarg BOOTIF= >/dev/null && \
-    die "Mixing BOOTIF and ip= lines is dangerous"
-
-# No more parsing stuff, BOOTIF says everything
-[ -n "$(getarg BOOTIF)" ] && return
-
-if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] ; then
+if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] && [ -z "$(getarg BOOTIF=)" ]; then
     # No ip= argument(s) for netroot provided, defaulting to DHCP
     return;
 fi
@@ -40,19 +32,23 @@ fi
 unset count
 
 # If needed, check if bootdev= contains anything usable
-if [ -n "$NEEDBOOTDEV" ] ; then
-    BOOTDEV=$(getarg bootdev=) || die "Please supply bootdev argument for multiple ip= lines"
-    [ -z "$BOOTDEV" ] && die "Bootdev argument is empty"
-fi
+BOOTDEV=$(getarg bootdev=)
 
-# If ibft is requested, read ibft vals and write ip=XXX cmdline args
-[ "ibft" = "$(getarg ip=)" ] && ibft_to_cmdline
+if [ -n "$NEEDBOOTDEV" ] ; then
+    [ -z "$BOOTDEV" ] && warn "Please supply bootdev argument for multiple ip= lines"
+fi
 
 # Check ip= lines
 # XXX Would be nice if we could errorcheck ip addresses here as well
 for p in $(getargs ip=); do
     ip_to_var $p
 
+    # make first device specified the BOOTDEV
+    if [ -z "$BOOTDEV" ] && [ -n "$dev" ]; then
+        BOOTDEV="$dev"
+        [ -n "$NEEDBOOTDEV" ] && warn "Setting bootdev to '$BOOTDEV'"
+    fi
+
     # skip ibft since we did it above
     [ "$autoconf" = "ibft" ] && continue
 
@@ -96,9 +92,6 @@ for p in $(getargs ip=); do
         IFACES="$IFACES $dev"
     fi
 
-    # Small optimization for udev rules
-    [ -z "$NEEDBOOTDEV" ] && [ -n "$dev" ] && BOOTDEV=$dev
-
     # Do we need to check for specific options?
     if [ -n "$NEEDDHCP" ] || [ -n "$DHCPORSERVER" ] ; then
         # Correct device? (Empty is ok as well)
@@ -114,6 +107,12 @@ for p in $(getargs ip=); do
 
 done
 
+# put BOOTIF in IFACES to make sure it comes up
+if getargbool 1 "rd.bootif" && BOOTIF="$(getarg BOOTIF=)"; then
+    BOOTDEV=$(fix_bootif $BOOTIF)
+    IFACES="$BOOTDEV $IFACES"
+fi
+
 # This ensures that BOOTDEV is always first in IFACES
 if [ -n "$BOOTDEV" ] && [ -n "$IFACES" ] ; then
     IFACES="${IFACES%$BOOTDEV*} ${IFACES#*$BOOTDEV}"
@@ -123,6 +122,3 @@ fi
 # Store BOOTDEV and IFACES for later use
 [ -n "$BOOTDEV" ] && echo $BOOTDEV > /tmp/net.bootdev
 [ -n "$IFACES" ]  && echo $IFACES > /tmp/net.ifaces
-
-# We need a ip= line for the configured bootdev=
-[ -n "$NEEDBOOTDEV" ] && [ -z "$BOOTDEVOK" ] && die "Bootdev Argument '$BOOTDEV' not found"

modules.d/40network/parse-team.sh

@@ -0,0 +1,44 @@
+#!/bin/sh
+#
+# Format:
+#       team=<teammaster>:<teamslaves>
+#
+#       teamslaves is a comma-separated list of physical (ethernet) interfaces
+#
+
+# return if team already parsed
+[ -n "$teammaster" ] && return
+
+# Check if team parameter is valid
+if getarg team= >/dev/null ; then
+    :
+fi
+
+parseteam() {
+    local v=${1}:
+    set --
+    while [ -n "$v" ]; do
+        set -- "$@" "${v%%:*}"
+        v=${v#*:}
+    done
+
+    unset teammaster teamslaves
+    case $# in
+    2)  teammaster=$1; teamslaves=$(str_replace "$2" "," " ") ;;
+    *)  die "team= requires two parameters" ;;
+    esac
+}
+
+unset teammaster teamslaves
+
+if getarg team>/dev/null; then
+    # Read team= parameters if they exist
+    team="$(getarg team=)"
+    if [ ! "$team" = "team" ]; then
+        parseteam "$(getarg team=)"
+    fi
+
+    echo "teammaster=$teammaster" > /tmp/team.info
+    echo "teamslaves=\"$teamslaves\"" >> /tmp/team.info
+    return
+fi

modules.d/45ifcfg/module-setup.sh

@@ -2,14 +2,18 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
+    [[ -d /etc/sysconfig/network-scripts ]] && return 0
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     inst_hook pre-pivot 85 "$moddir/write-ifcfg.sh"
 }

modules.d/45ifcfg/write-ifcfg.sh

@@ -4,19 +4,15 @@
 
 # NFS root might have reached here before /tmp/net.ifaces was written
 udevadm settle --timeout=30
-# Don't write anything if we don't know our bootdev
-[ -f /tmp/net.ifaces ] || return 1
-
-read IFACES < /tmp/net.ifaces
-
-if [ -e /tmp/bond.info ]; then
-    . /tmp/bond.info
-fi
 
 if [ -e /tmp/bridge.info ]; then
     . /tmp/bridge.info
 fi
 
+if [ -e /tmp/vlan.info ]; then
+    . /tmp/vlan.info
+fi
+
 mkdir -m 0755 -p /tmp/ifcfg/
 mkdir -m 0755 -p /tmp/ifcfg-leases/
 
@@ -83,11 +79,27 @@ print_s390() {
     echo "OPTIONS=\"${OPTIONS}\""
 }
 
+for netup in /tmp/net.*.did-setup ; do
+    [ -f $netup ] || continue
 
-for netif in $IFACES ; do
-    # bridge?
+    netif=${netup%%.did-setup}
+    netif=${netif##*/net.}
+    [ -e /tmp/ifcfg/ifcfg-$netif ] && continue
     unset bridge
     unset bond
+    unset bondslaves
+    unset bondname
+    unset bondoptions
+    unset uuid
+    unset ip
+    unset gw
+    unset mtu
+    unset mask
+    unset macaddr
+    unset slave
+    unset ethname
+    [ -e /tmp/bond.${netif}.info ] && . /tmp/bond.${netif}.info
+
     uuid=$(cat /proc/sys/kernel/random/uuid)
     if [ "$netif" = "$bridgename" ]; then
         bridge=yes
@@ -95,55 +107,76 @@ for netif in $IFACES ; do
     # $netif can't be bridge and bond at the same time
         bond=yes
     fi
+    if [ "$netif" = "$vlanname" ]; then
+        vlan=yes
+    fi
     cat /sys/class/net/$netif/address > /tmp/net.$netif.hwaddr
     {
         echo "# Generated by dracut initrd"
-        echo "DEVICE=$netif"
+        echo "DEVICE=\"$netif\""
         echo "ONBOOT=yes"
         echo "NETBOOT=yes"
-        echo "UUID=$uuid"
-        [ -n "$mtu" ] && echo "MTU=$mtu"
-        if [ -f /tmp/net.$netif.lease ]; then
-            strstr "$ip" '*:*:*' &&
-            echo "DHCPV6C=yes"
-            echo "BOOTPROTO=dhcp"
-            cp /tmp/net.$netif.lease /tmp/ifcfg-leases/dhclient-$uuid-$netif.lease
+        echo "UUID=\"$uuid\""
+        if [ -f /tmp/dhclient.$netif.lease ]; then
+            [ -f /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
+            strstr "$ip" '*:*:*' && echo "IPV6INIT=yes"
+            if [ -f /tmp/net.$netif.has_ibft_config ]; then
+                echo "BOOTPROTO=ibft"
+            else
+                echo "BOOTPROTO=dhcp"
+            fi
+            cp /tmp/dhclient.$netif.lease /tmp/ifcfg-leases/dhclient-$uuid-$netif.lease
         else
             # If we've booted with static ip= lines, the override file is there
             [ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override
             if strstr "$ip" '*:*:*'; then
+                echo "IPV6INIT=yes"
                 echo "IPV6_AUTOCONF=no"
-                echo "IPV6ADDR=$ip/$mask"
+                echo "IPV6ADDR=\"$ip/$mask\""
             else
-                echo "BOOTPROTO=none"
-                echo "IPADDR=$ip"
-                if strstr "$mask" "."; then
-                    echo "NETMASK=$mask"
+                if [ -f /tmp/net.$netif.has_ibft_config ]; then
+                    echo "BOOTPROTO=ibft"
                 else
-                    echo "PREFIX=$mask"
+                    echo "BOOTPROTO=none"
+                    echo "IPADDR=\"$ip\""
+                    if strstr "$mask" "."; then
+                        echo "NETMASK=\"$mask\""
+                    else
+                        echo "PREFIX=\"$mask\""
+                    fi
                 fi
             fi
             if strstr "$gw" '*:*:*'; then
-                echo "IPV6_DEFAULTGW=$gw"
+                echo "IPV6_DEFAULTGW=\"$gw\""
             elif [ -n "$gw" ]; then
-                echo "GATEWAY=$gw"
+                echo "GATEWAY=\"$gw\""
             fi
         fi
+        [ -n "$mtu" ] && echo "MTU=\"$mtu\""
     } > /tmp/ifcfg/ifcfg-$netif
 
     # bridge needs different things written to ifcfg
-    if [ -z "$bridge" ] && [ -z "$bond" ]; then
+    if [ -z "$bridge" ] && [ -z "$bond" ] && [ -z "$vlan" ]; then
         # standard interface
         {
             if [ -n "$macaddr" ]; then
-                echo "MACADDR=$macaddr"
+                echo "MACADDR=\"$macaddr\""
             else
                 echo "HWADDR=\"$(cat /sys/class/net/$netif/address)\""
             fi
             print_s390 $netif
             echo "TYPE=Ethernet"
-            echo "NAME=\"Boot Disk\""
-            [ -n "$mtu" ] && echo "MTU=$mtu"
+            echo "NAME=\"$netif\""
+            [ -n "$mtu" ] && echo "MTU=\"$mtu\""
+        } >> /tmp/ifcfg/ifcfg-$netif
+    fi
+
+    if [ -n "$vlan" ] ; then
+        {
+            echo "TYPE=Vlan"
+            echo "NAME=\"$netif\""
+            echo "VLAN=yes"
+            echo "PHYSDEV=\"$phydevice\""
         } >> /tmp/ifcfg/ifcfg-$netif
     fi
 
@@ -152,22 +185,22 @@ for netif in $IFACES ; do
         {
             # This variable is an indicator of a bond interface for initscripts
             echo "BONDING_OPTS=\"$bondoptions\""
-            echo "NAME=\"Boot Disk\""
+            echo "NAME=\"$netif\""
+            echo "TYPE=Bond"
         } >> /tmp/ifcfg/ifcfg-$netif
 
         for slave in $bondslaves ; do
-            # Set ONBOOT=no to prevent initscripts from trying to setup already bonded physical interface
             # write separate ifcfg file for the raw eth interface
             {
                 echo "# Generated by dracut initrd"
-                echo "DEVICE=$slave"
+                echo "DEVICE=\"$slave\""
                 echo "TYPE=Ethernet"
-                echo "ONBOOT=no"
+                echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
-                echo "HWADDR=$(cat /sys/class/net/$slave/address)"
+                echo "HWADDR=\"$(cat /sys/class/net/$slave/address)\""
                 echo "SLAVE=yes"
-                echo "MASTER=$netif"
-                echo "NAME=$slave"
+                echo "MASTER=\"$netif\""
+                echo "NAME=\"$slave\""
             } >> /tmp/ifcfg/ifcfg-$slave
         done
     fi
@@ -176,52 +209,50 @@ for netif in $IFACES ; do
         # bridge
         {
             echo "TYPE=Bridge"
-            echo "NAME=\"Boot Disk\""
+            echo "NAME=\"$netif\""
         } >> /tmp/ifcfg/ifcfg-$netif
         if [ "$ethname" = "$bondname" ] ; then
             {
-                # Set ONBOOT=no to prevent initscripts from trying to setup already bridged bond interface
                 echo "# Generated by dracut initrd"
-                echo "DEVICE=$bondname"
-                echo "ONBOOT=no"
+                echo "DEVICE=\"$bondname\""
+                echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
                 # This variable is an indicator of a bond interface for initscripts
                 echo "BONDING_OPTS=\"$bondoptions\""
-                echo "BRIDGE=$netif"
+                echo "BRIDGE=\"$netif\""
                 echo "NAME=\"$bondname\""
             } >> /tmp/ifcfg/ifcfg-$bondname
             for slave in $bondslaves ; do
                 # write separate ifcfg file for the raw eth interface
-                # Set ONBOOT=no to prevent initscripts from trying to setup already bridged physical interface
                 {
                     echo "# Generated by dracut initrd"
-                    echo "DEVICE=$slave"
+                    echo "DEVICE=\"$slave\""
                     echo "TYPE=Ethernet"
-                    echo "ONBOOT=no"
+                    echo "ONBOOT=yes"
                     echo "NETBOOT=yes"
-                    echo "HWADDR=$(cat /sys/class/net/$slave/address)"
+                    echo "HWADDR=\"$(cat /sys/class/net/$slave/address)\""
                     echo "SLAVE=yes"
-                    echo "MASTER=$bondname"
-                    echo "NAME=$slave"
+                    echo "MASTER=\"$bondname\""
+                    echo "NAME=\"$slave\""
                 } >> /tmp/ifcfg/ifcfg-$slave
             done
         else
             # write separate ifcfg file for the raw eth interface
             {
                 echo "# Generated by dracut initrd"
-                echo "DEVICE=$ethname"
+                echo "DEVICE=\"$ethname\""
                 echo "TYPE=Ethernet"
-                echo "ONBOOT=no"
+                echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
-                echo "HWADDR=$(cat /sys/class/net/$ethname/address)"
-                echo "BRIDGE=$netif"
-                echo "NAME=$ethname"
+                echo "HWADDR=\"$(cat /sys/class/net/$ethname/address)\""
+                echo "BRIDGE=\"$netif\""
+                echo "NAME=\"$ethname\""
             } >> /tmp/ifcfg/ifcfg-$ethname
         fi
     fi
     i=1
     for ns in $(getargs nameserver); do
-        echo "DNS${i}=${ns}" >> /tmp/ifcfg/ifcfg-$netif
+        echo "DNS${i}=\"${ns}\"" >> /tmp/ifcfg/ifcfg-$netif
         i=$((i+1))
     done
 done

modules.d/45url-lib/module-setup.sh

@@ -1,24 +1,43 @@
 #!/bin/bash
 # module-setup for url-lib
 
+# called by dracut
 check() {
     command -v curl >/dev/null || return 1
     return 255
 }
 
+# called by dracut
 depends() {
     echo network
     return 0
 }
 
+# called by dracut
 install() {
+    local _dir _crt _found _lib
     inst_simple "$moddir/url-lib.sh" "/lib/url-lib.sh"
-    dracut_install curl
-    mkdir -m 0755 -p "$initdir/etc/ssl/certs"
-    if ! inst_any -t /etc/ssl/certs/ca-bundle.crt \
-            /etc/ssl/certs/ca-bundle.crt \
-            /etc/ssl/certs/ca-certificates.crt; then
-        dwarn "Couldn't find SSL CA cert bundle; HTTPS won't work."
-    fi
+    inst_multiple curl
+    # also install libs for curl https
+    inst_libdir_file "libnsspem.so*"
+    inst_libdir_file "libnsssysinit.so*"
+    inst_libdir_file "libsoftokn3.so*"
+    inst_libdir_file "libsqlite3.so*"
+
+    for _dir in $libdirs; do
+	[[ -d $_dir ]] || continue
+        for _lib in $_dir/libcurl.so.*; do
+	    [[ -e $_lib ]] || continue
+            _crt=$(grep -F --binary-files=text -z .crt $_lib)
+            [[ $_crt ]] || continue
+            [[ $_crt == /*/* ]] || continue
+            if ! inst_simple "$_crt"; then
+                dwarn "Couldn't install '$_crt' SSL CA cert bundle; HTTPS might not work."
+                continue
+            fi
+            _found=1
+        done
+    done
+    [[ $_found ]] || dwarn "Couldn't find SSL CA cert bundle; HTTPS won't work."
 }
 

modules.d/45url-lib/url-lib.sh

@@ -23,7 +23,7 @@ fetch_url() {
     local handler="$(get_url_handler $url)"
     [ -n "$handler" ] || return 254
     [ -n "$url" ] || return 255
-    $handler "$url" "$outloc"
+    "$handler" "$url" "$outloc"
 }
 
 # get_url_handler URL
@@ -54,22 +54,29 @@ add_url_handler() {
 
 export CURL_HOME="/run/initramfs/url-lib"
 mkdir -p $CURL_HOME
-curl_args="--location --retry 3 --fail --show-error"
+curl_args="--globoff --location --retry 3 --fail --show-error"
+getargbool 0 rd.noverifyssl && curl_args="$curl_args --insecure"
+
+proxy=$(getarg proxy=)
+[ -n "$proxy" ] && curl_args="$curl_args --proxy $proxy"
 
 curl_fetch_url() {
     local url="$1" outloc="$2"
     echo "$url" > /proc/self/fd/0
     if [ -n "$outloc" ]; then
-        curl $curl_args --output "$outloc" "$url" || return $?
+        curl $curl_args --output - -- "$url" > "$outloc" || return $?
     else
         local outdir="$(mkuniqdir /tmp curl_fetch_url)"
         ( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
         outloc="$outdir/$(ls -A $outdir)"
     fi
-    [ -f "$outloc" ] || return 253
+    if ! [ -f "$outloc" ]; then
+	    warn "Downloading '$url' failed!"
+	    return 253
+    fi
     if [ -z "$2" ]; then echo "$outloc" ; fi
 }
-add_url_handler curl_fetch_url http https ftp
+add_url_handler curl_fetch_url http https ftp tftp
 
 set_http_header() {
     echo "header = \"$1: $2\"" >> $CURL_HOME/.curlrc
@@ -99,18 +106,18 @@ nfs_fetch_url() {
     local filepath="${path%/*}" filename="${path##*/}" mntdir=""
 
     # skip mount if server:/filepath is already mounted
-    mntdir=$(nfs_already_mounted $server $path)
+    mntdir=$(nfs_already_mounted "$server" "$path")
     if [ -z "$mntdir" ]; then
         local mntdir="$(mkuniqdir /run nfs_mnt)"
-        mount_nfs $nfs:$server:$filepath${options:+:$options} $mntdir
+        mount_nfs "$nfs:$server:$filepath${options:+:$options}" "$mntdir"
         # lazy unmount during pre-pivot hook
-        inst_hook --hook pre-pivot --name 99url-lib-umount-nfs umount -l $mntdir
+        inst_hook --hook pre-pivot --name 99url-lib-umount-nfs umount -l -- "$mntdir"
     fi
 
     if [ -z "$outloc" ]; then
         outloc="$mntdir/$filename"
     else
-        cp -f "$mntdir/$filename" "$outloc" || return $?
+        cp -f -- "$mntdir/$filename" "$outloc" || return $?
     fi
     [ -f "$outloc" ] || return 253
     if [ -z "$2" ]; then echo "$outloc" ; fi

modules.d/50drm/module-setup.sh

@@ -0,0 +1,66 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+# called by dracut
+check() {
+    return 255
+}
+
+# called by dracut
+depends() {
+    return 0
+}
+
+# called by dracut
+installkernel() {
+    local _modname
+    # Include KMS capable drm drivers
+
+    drm_module_filter() {
+        local _drm_drivers='drm_crtc_init'
+        local _ret
+        # subfunctions inherit following FDs
+        local _merge=8 _side2=9
+        function nmf1() {
+            local _fname _fcont
+            while read _fname; do
+                case "$_fname" in
+                    *.ko)    _fcont="$(<        $_fname)" ;;
+                    *.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
+                    *.ko.xz) _fcont="$(xz -dc   $_fname)" ;;
+                esac
+                [[   $_fcont =~ $_drm_drivers
+                && ! $_fcont =~ iw_handler_get_spy ]] \
+                && echo "$_fname"
+            done
+        }
+        function rotor() {
+            local _f1 _f2
+            while read _f1; do
+                echo "$_f1"
+                if read _f2; then
+                    echo "$_f2" 1>&${_side2}
+                fi
+            done | nmf1 1>&${_merge}
+        }
+        # Use two parallel streams to filter alternating modules.
+        set +x
+        eval "( ( rotor ) ${_side2}>&1 | nmf1 ) ${_merge}>&1"
+        [[ $debug ]] && set -x
+        return 0
+    }
+
+    for _modname in $(find_kernel_modules_by_path drivers/gpu/drm \
+        | drm_module_filter) ; do
+        # if the hardware is present, include module even if it is not currently loaded,
+        # as we could e.g. be in the installer; nokmsboot boot parameter will disable
+        # loading of the driver if needed
+        if [[ $hostonly ]] && modinfo -F alias $_modname | sed -e 's,\?,\.,g' -e 's,\*,\.\*,g' \
+            | grep -qxf - /sys/bus/pci/devices/*/modalias 2>/dev/null; then
+            hostonly='' instmods $_modname
+            continue
+        fi
+        instmods $_modname
+    done
+}

modules.d/50gensplash/README

@@ -1,4 +1,4 @@
-Dracut gensplash module
+dracut gensplash module
 -----------------------
 
 INDEX

modules.d/50gensplash/gensplash-pretrigger.sh

@@ -2,7 +2,7 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-if getargbool 1 rd.splash -n rd_NO_SPLASH; then
+if getargbool 1 rd.splash -d -n rd_NO_SPLASH; then
     info "Starting Gentoo Splash"
 
     [ -x /lib/udev/console_init ] && /lib/udev/console_init /dev/tty0

modules.d/50gensplash/module-setup.sh

@@ -2,16 +2,19 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     # TODO: splash_geninitramfs
     # TODO: /usr/share/splashutils/initrd.splash
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     local _opts
     local _splash_theme
@@ -71,7 +74,7 @@ install() {
     mv dev.old dev
     popd >/dev/null
 
-    dracut_install chvt
+    inst_multiple chvt
     inst /usr/share/splashutils/initrd.splash /lib/gensplash-lib.sh
     inst_hook pre-pivot 90 "${moddir}"/gensplash-newroot.sh
     inst_hook pre-trigger 10 "${moddir}"/gensplash-pretrigger.sh

modules.d/50plymouth/module-setup.sh

@@ -2,83 +2,34 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
-    [[ -x /sbin/plymouthd && -x /bin/plymouth && -x /usr/sbin/plymouth-set-default-theme ]]
+    type -P plymouthd >/dev/null && type -P plymouth >/dev/null
 }
 
+# called by dracut
 depends() {
-    return 0
-}
-
-installkernel() {
-    local _modname
-    # Include KMS capable drm drivers
-
-    drm_module_filter() {
-        local _drm_drivers='drm_crtc_init'
-        local _ret
-        # subfunctions inherit following FDs
-        local _merge=8 _side2=9
-        function nmf1() {
-            local _fname _fcont
-            while read _fname; do
-                case "$_fname" in
-                    *.ko)    _fcont="$(<        $_fname)" ;;
-                    *.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
-                    *.ko.xz) _fcont="$(xz -dc   $_fname)" ;;
-                esac
-                [[   $_fcont =~ $_drm_drivers
-                && ! $_fcont =~ iw_handler_get_spy ]] \
-                && echo "$_fname"
-            done
-        }
-        function rotor() {
-            local _f1 _f2
-            while read _f1; do
-                echo "$_f1"
-                if read _f2; then
-                    echo "$_f2" 1>&${_side2}
-                fi
-            done | nmf1 1>&${_merge}
-        }
-        # Use two parallel streams to filter alternating modules.
-        set +x
-        eval "( ( rotor ) ${_side2}>&1 | nmf1 ) ${_merge}>&1"
-        [[ $debug ]] && set -x
-        return 0
-    }
-
-    for _modname in $(find_kernel_modules_by_path drivers/gpu/drm \
-        | drm_module_filter) ; do
-        # if the hardware is present, include module even if it is not currently loaded,
-        # as we could e.g. be in the installer; nokmsboot boot parameter will disable
-        # loading of the driver if needed
-        if [[ $hostonly ]] && modinfo -F alias $_modname | sed -e 's,\?,\.,g' -e 's,\*,\.\*,g' \
-            | grep -qxf - /sys/bus/pci/devices/*/modalias; then
-            hostonly='' instmods $_modname
-            continue
-        fi
-        instmods $_modname
-    done
+    echo drm
 }
 
+# called by dracut
 install() {
     if grep -q nash /usr/libexec/plymouth/plymouth-populate-initrd \
         || [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
         . "$moddir"/plymouth-populate-initrd.sh
     else
         PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
-            /usr/libexec/plymouth/plymouth-populate-initrd -t $initdir
+            /usr/libexec/plymouth/plymouth-populate-initrd -t "$initdir"
     fi
 
-    inst_hook pre-pivot 90 "$moddir"/plymouth-newroot.sh
-    inst_hook pre-trigger 10 "$moddir"/plymouth-pretrigger.sh
     inst_hook emergency 50 "$moddir"/plymouth-emergency.sh
-    dracut_install readlink
 
-    if [[ -x $systemdutildir/systemd ]]; then
-        dracut_install -o $systemdsystemunitdir/plymouth-quit-wait.service
+    inst_multiple readlink
+
+    if ! dracut_module_included "systemd"; then
+        inst_hook pre-trigger 10 "$moddir"/plymouth-pretrigger.sh
+        inst_hook pre-pivot 90 "$moddir"/plymouth-newroot.sh
     fi
 }
 

modules.d/50plymouth/plymouth-emergency.sh

@@ -1,4 +1,4 @@
 #!/bin/sh
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
-[ -x /bin/plymouth ] && /bin/plymouth --hide-splash
+plymouth --hide-splash 2>/dev/null || :

modules.d/50plymouth/plymouth-newroot.sh

@@ -2,6 +2,6 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-if [ -x /bin/plymouth ]; then
-    /bin/plymouth --newroot=$NEWROOT
+if type plymouth >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
+    plymouth --newroot=$NEWROOT
 fi

modules.d/50plymouth/plymouth-populate-initrd.sh

@@ -4,17 +4,16 @@
 PLYMOUTH_LOGO_FILE="/usr/share/pixmaps/system-logo-white.png"
 PLYMOUTH_THEME=$(plymouth-set-default-theme)
 
-inst /sbin/plymouthd /bin/plymouthd
-dracut_install /bin/plymouth \
+inst_multiple plymouthd plymouth \
     "${PLYMOUTH_LOGO_FILE}" \
     /etc/system-release
 
 mkdir -m 0755 -p "${initdir}/usr/share/plymouth"
 
 inst_libdir_file "plymouth/text.so" "plymouth/details.so"
-    
+
 if [[ $hostonly ]]; then
-    dracut_install \
+    inst_multiple \
         "/usr/share/plymouth/themes/details/details.plymouth" \
         "/usr/share/plymouth/themes/text/text.plymouth" \
 
@@ -36,7 +35,7 @@ else
         [[ -f "$x" ]] || continue
         THEME_DIR=$(dirname "$x")
         mkdir -m 0755 -p "${initdir}/$THEME_DIR"
-        dracut_install "$x"
+        inst_multiple "$x"
     done
     (
         cd ${initdir}/usr/share/plymouth/themes;

modules.d/50plymouth/plymouth-pretrigger.sh

@@ -2,8 +2,8 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-if [ -x /bin/plymouthd ]; then
-    if getargbool 1 plymouth.enable && getargbool 1 rd.plymouth -n rd_NO_PLYMOUTH; then
+if type plymouthd >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
+    if getargbool 1 plymouth.enable && getargbool 1 rd.plymouth -d -n rd_NO_PLYMOUTH; then
         # first trigger graphics subsystem
         udevadm trigger --action=add --attr-match=class=0x030000 >/dev/null 2>&1
         # first trigger graphics and tty subsystem
@@ -16,8 +16,8 @@ if [ -x /bin/plymouthd ]; then
         read consoledev rest < /sys/class/tty/console/active
         consoledev=${consoledev:-tty0}
         [ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev"
-        [ -x /bin/plymouthd ] && /bin/plymouthd --attach-to-session --pid-file /run/plymouth/pid
-        /bin/plymouth --show-splash 2>&1 | vinfo
+        plymouthd --attach-to-session --pid-file /run/plymouth/pid
+        plymouth --show-splash 2>&1 | vinfo
         # reset tty after plymouth messed with it
         [ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev"
     fi

modules.d/80cms/cms-write-ifcfg.sh

@@ -32,6 +32,7 @@ function cms_write_config()
     cat > /etc/sysconfig/network << EOF
 HOSTNAME=$HOSTNAME
 EOF
+    echo "$HOSTNAME" > /etc/hostname
     if [ "$ipv6" ]; then
 	echo "NETWORKING_IPV6=yes" >> /etc/sysconfig/network
     else