prepare 034 release

default_kernel_images and -i/-k paths are new (SuSE) code paths and
would have resulted in usage errors before.

There we want to build host only images for faster building and
smaller images.
Also force creation (overriding) of initrd images in these code paths.

Signed-off-by: Thomas Renninger <trenn@suse.de>

.gitignore

@@ -13,3 +13,7 @@ test*.img
 /.project
 /dracut-version.sh
 /install/dracut-install
+/*.rpm
+/*.[0-9]
+/modules.d/98systemd/*.service.8
+/*.sign

.mailmap

@@ -1,12 +1,15 @@
-Philippe Seewer <philippe.seewer@bfh.ch> <philippe.seewer-omB+W0Dpw2o@public.gmane.org>
-Seewer Philippe <philippe.seewer@bfh.ch> <philippe.seewer@bfh.ch>
-Philippe Seewer <philippe.seewer@bfh.ch> <philippe.seewer@bfh.ch>
-Victor Lowther <victor.lowther@gmail.com> <victor.lowther-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
-Harald Hoyer <harald@redhat.com> <harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
-Harald Hoyer <harald@redhat.com> <harald@eeepc.(none)>
-Mike Snitzer <snitzer@redhat.com> <msnitzer@redhat.com> 
-Amerigo Wang <amwang@redhat.com> <xiyou.wangcong@gmail.com>
-Andrey Borzenkov <arvidjaar@gmail.com> <arvidjaar@mail.ru>
-Dan Horák <dhorak@redhat.com> <dan@danny.cz>
-John Reiser <jreiser@bitwagon.com> <jreiser@BitWagon.com>
-Luca Berra <bluca@vodka.it> <bluca@comedia.it>
+Philippe Seewer <philippe.seewer@bfh.ch> 	<philippe.seewer-omB+W0Dpw2o@public.gmane.org>
+Seewer Philippe <philippe.seewer@bfh.ch> 	<philippe.seewer@bfh.ch>
+Philippe Seewer <philippe.seewer@bfh.ch> 	<philippe.seewer@bfh.ch>
+Victor Lowther <victor.lowther@gmail.com> 	<victor.lowther-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+Harald Hoyer <harald@redhat.com> 		<harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
+Harald Hoyer <harald@redhat.com> 		<harald@eeepc.(none)>
+Mike Snitzer <snitzer@redhat.com> 		<msnitzer@redhat.com>
+Amerigo Wang <amwang@redhat.com> 		<xiyou.wangcong@gmail.com>
+Andrey Borzenkov <arvidjaar@gmail.com> 		<arvidjaar@mail.ru>
+Dan Horák <dhorak@redhat.com> 			<dan@danny.cz>
+John Reiser <jreiser@bitwagon.com> 		<jreiser@BitWagon.com>
+Luca Berra <bluca@vodka.it> 			<bluca@comedia.it>
+Dave Young <dyoung@redhat.com>	 		dyoung@redhat.com
+Frederick Grose <fgrose@sugarlabs.org> 		<fgrose@gmail.com>
+Frederic Crozat <fcrozat@suse.com> 		<fcrozat@mandriva.com>

50-dracut.install

@@ -0,0 +1,33 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+if [[ -f /etc/kernel/cmdline ]]; then
+    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+fi
+
+if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
+    readarray -t BOOT_OPTIONS < /proc/cmdline
+fi
+
+unset noimageifnotneeded
+
+for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
+    if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
+        noimageifnotneeded="yes"
+        break
+    fi
+done
+
+ret=0
+case "$1" in
+    add)
+	dracut ${noimageifnotneeded:+--noimageifnotneeded} "$3"/initrd "$2"
+        ret=$?
+	;;
+    remove)
+        rm -f -- "$3"/initrd
+        ret=$?
+	;;
+esac
+exit $ret

51-dracut-rescue-postinst.sh

@@ -0,0 +1,70 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+export LANG=C
+
+KERNEL_VERSION="$1"
+KERNEL_IMAGE="$2"
+
+[[ -f /etc/os-release ]] && . /etc/os-release
+
+if [[ ! -f /etc/machine-id ]] || [[ ! -s /etc/machine-id ]]; then
+    systemd-machine-id-setup
+fi
+
+[[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
+
+[[ $MACHINE_ID ]] || exit 1
+[[ -f $KERNEL_IMAGE ]] || exit 1
+
+INITRDFILE="/boot/initramfs-0-rescue-${MACHINE_ID}.img"
+NEW_KERNEL_IMAGE="${KERNEL_IMAGE%/*}/vmlinuz-0-rescue-${MACHINE_ID}"
+
+[[ -f $INITRDFILE ]] && [[ -f $NEW_KERNEL_IMAGE ]] && exit 0
+
+dropindirs_sort()
+{
+    suffix=$1; shift
+    args=("$@")
+    files=$(
+        while (( $# > 0 )); do
+            for i in ${1}/*${suffix}; do
+                [[ -f $i ]] && echo ${i##*/}
+            done
+            shift
+        done | sort -Vu
+    )
+
+    for f in $files; do
+        for d in "${args[@]}"; do
+            if [[ -f "$d/$f" ]]; then
+                echo "$d/$f"
+                continue 2
+            fi
+        done
+    done
+}
+
+# source our config dir
+for f in $(dropindirs_sort ".conf" "/etc/dracut.conf.d" "/usr/lib/dracut/dracut.conf.d"); do
+    [[ -e $f ]] && . "$f"
+done
+
+[[ $dracut_rescue_image != "yes" ]] && exit 0
+
+if [[ ! -f $INITRDFILE ]]; then
+    dracut --no-hostonly -a "rescue" "$INITRDFILE" "$KERNEL_VERSION"
+    ((ret+=$?))
+fi
+
+if [[ ! -f $NEW_KERNEL_IMAGE ]]; then
+    cp "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
+    ((ret+=$?))
+fi
+
+new-kernel-pkg --install "$KERNEL_VERSION" --kernel-image "$NEW_KERNEL_IMAGE" --initrdfile "$INITRDFILE" --banner "$NAME $VERSION_ID Rescue $MACHINE_ID"
+
+((ret+=$?))
+
+exit $ret

51-dracut-rescue.install

@@ -0,0 +1,103 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+export LANG=C
+
+COMMAND="$1"
+KERNEL_VERSION="$2"
+BOOT_DIR_ABS="${3%/*}/0-rescue"
+KERNEL_IMAGE="$4"
+
+
+dropindirs_sort()
+{
+    suffix=$1; shift
+    args=("$@")
+    files=$(
+        while (( $# > 0 )); do
+            for i in ${1}/*${suffix}; do
+                [[ -f $i ]] && echo ${i##*/}
+            done
+            shift
+        done | sort -Vu
+    )
+
+    for f in $files; do
+        for d in "${args[@]}"; do
+            if [[ -f "$d/$f" ]]; then
+                echo "$d/$f"
+                continue 2
+            fi
+        done
+    done
+}
+
+[[ -f /etc/os-release ]] && . /etc/os-release
+
+if [[ ! -f /etc/machine-id ]] || [[ ! -s /etc/machine-id ]]; then
+    systemd-machine-id-setup
+fi
+
+[[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
+
+if [[ -f /etc/kernel/cmdline ]]; then
+    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+fi
+if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
+    readarray -t BOOT_OPTIONS < /proc/cmdline
+fi
+if ! [[ $BOOT_OPTIONS ]]; then
+    exit 1
+fi
+
+LOADER_ENTRY="/boot/loader/entries/${MACHINE_ID}-0-rescue.conf"
+BOOT_DIR="/${MACHINE_ID}/0-rescue"
+
+ret=0
+
+case "$COMMAND" in
+    add)
+        for i in "/boot/loader/entries/${MACHINE_ID}-0-rescue.conf"; do
+            [[ -f $i ]] && exit 0
+        done
+
+        # source our config dir
+        for f in $(dropindirs_sort ".conf" "/etc/dracut.conf.d" "/usr/lib/dracut/dracut.conf.d"); do
+            [[ -e $f ]] && . "$f"
+        done
+
+        [[ $dracut_rescue_image != "yes" ]] && exit 0
+
+        [[ -d "$BOOT_DIR_ABS" ]] || mkdir -p "$BOOT_DIR_ABS"
+
+        if ! cp "$KERNEL_IMAGE" "$BOOT_DIR_ABS"/linux; then
+            echo "Can't copy '$KERNEL_IMAGE to '$BOOT_DIR_ABS/linux'!" >&2
+        fi
+
+        dracut --no-hostonly  -a "rescue" "$BOOT_DIR_ABS"/initrd "$2"
+        ((ret+=$?))
+
+        {
+            echo "title      $PRETTY_NAME - Rescue Image"
+            echo "version    $KERNEL_VERSION"
+            echo "machine-id $MACHINE_ID"
+            echo "options    ${BOOT_OPTIONS[@]} rd.auto=1"
+            echo "linux      $BOOT_DIR/linux"
+            echo "initrd     $BOOT_DIR/initrd"
+        } > $LOADER_ENTRY
+        ((ret+=$?))
+        ;;
+
+    remove)
+        exit 0
+        ;;
+
+    *)
+        usage
+        ret=1;;
+esac
+
+((ret+=$?))
+
+exit $ret

AUTHORS

@@ -1,69 +1,86 @@
 Harald Hoyer <harald@redhat.com>
 Victor Lowther <victor.lowther@gmail.com>
 Amadeusz Żołnowski <aidecoe@aidecoe.name>
+Will Woods <wwoods@redhat.com>
 Philippe Seewer <philippe.seewer@bfh.ch>
 Warren Togami <wtogami@redhat.com>
-Will Woods <wwoods@redhat.com>
 Jeremy Katz <katzj@redhat.com>
+Dave Young <dyoung@redhat.com>
 David Dillow <dave@thedillows.org>
 Michal Soltys <soltys@ziu.info>
 Amerigo Wang <amwang@redhat.com>
-Dave Young <dyoung@redhat.com>
 Colin Guthrie <colin@mageia.org>
 Andrey Borzenkov <arvidjaar@gmail.com>
+Peter Jones <pjones@redhat.com>
 Andreas Thienemann <andreas@bawue.net>
 Hans de Goede <hdegoede@redhat.com>
-Peter Jones <pjones@redhat.com>
+WANG Chao <chaowang@redhat.com>
 John Reiser <jreiser@bitwagon.com>
 Luca Berra <bluca@vodka.it>
+Thomas Renninger <trenn@suse.de>
 Daniel Drake <dsd@laptop.org>
+Dan Horák <dhorak@redhat.com>
+Baoquan He <bhe@redhat.com>
 Leho Kraav <leho@kraav.com>
 Brian C. Lane <bcl@redhat.com>
+Kamil Rytarowski <n54@gmx.com>
 Marc Grimme <grimme@atix.de>
 Chao Wang <chaowang@redhat.com>
-Dan Horák <dhorak@redhat.com>
+Colin Walters <walters@verbum.org>
+Frederic Crozat <fcrozat@suse.com>
 Jesse Keating <jkeating@redhat.com>
 Milan Broz <mbroz@redhat.com>
+Peter Rajnoha <prajnoha@redhat.com>
+Radek Vykydal <rvykydal@redhat.com>
 Roberto Sassu <roberto.sassu@polito.it>
-dyoung@redhat.com <dyoung@redhat.com>
 Anton Blanchard <anton@samba.org>
 Bill Nottingham <notting@redhat.com>
 David Cantrell <dcantrell@redhat.com>
-Frederic Crozat <fcrozat@suse.com>
+Dennis Gilmore <dennis@ausil.us>
 Jon Ander Hernandez <jonan.h@gmail.com>
 Juan RP <xtraeme@gmail.com>
 Lance Albertson <lance@osuosl.org>
 Marian Ganisin <mganisin@redhat.com>
 Michael Ploujnikov <plouj@somanetworks.com>
-Peter Rajnoha <prajnoha@redhat.com>
+Wim Muskee <wimmuskee@gmail.com>
 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
 Alan Pevec <apevec@redhat.com>
-Colin Walters <walters@verbum.org>
-Dennis Gilmore <dennis@ausil.us>
+Alexander Tsoy <alexander@tsoy.me>
+Frederick Grose <fgrose@sugarlabs.org>
 Ian Dall <ian@beware.dropbear.id.au>
 James Buren <ryuo@frugalware.org>
+James Lee <jlee@thestaticvoid.com>
 Joey Boggs <jboggs@redhat.com>
+Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 Mike Snitzer <snitzer@redhat.com>
 Przemysław Rudy <prudy1@o2.pl>
+Stefan Reimer <it@startux.de>
 Thomas Lange <lange@informatik.uni-koeln.de>
 Vivek Goyal <vgoyal@redhat.com>
 Vladislav Bogdanov <bubble@hoster-ok.com>
-Wim Muskee <wimmuskee@gmail.com>
+Adam Williamson <awilliam@redhat.com>
 Alexander Todorov <atodorov@redhat.com>
 Andy Lutomirski <luto@mit.edu>
 Anssi Hannula <anssi@mageia.org>
+Brandon Philips <brandon@ifup.co>
 Canek Peláez Valdés <caneko@gmail.com>
 Chris Leech <cleech@redhat.com>
 Christian Heinz <christian.ch.heinz@gmail.com>
+Cong Wang <amwang@redhat.com>
+Daniel Schaal <farbing@web.de>
 Dave Jones <davej@redhat.com>
+Dave Young <dave@redhat.com>
+Dennis Schridde <devurandom@gmx.net>
 Duane Griffin <duaneg@dghda.com>
-Frederic Crozat <fcrozat@mandriva.com>
-Frederick Grose <fgrose@gmail.com>
 Glen Gray <slaine@slaine.org>
 Hermann Gausterer <git-dracut-2012@mrq1.org>
 James Laska <jlaska@redhat.com>
 Jan Stodola <jstodola@redhat.com>
-Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Jiri Pirko <jiri@resnulli.us>
+Joe Lawrence <Joe.Lawrence@stratus.com>
+Kevin Yung <Kevin.Yung@myob.com>
+Kyle McMartin <kyle@redhat.com>
+Lars R. Damerow <lars@pixar.com>
 Lennert Buytenhek <buytenh@wantstofly.org>
 Lubomir Rintel <lkundrak@v3.sk>
 Matt <smoothsailing72@hotmail.com>
@@ -71,17 +88,18 @@ Matt Smith <shadowfax@gmx.com>
 Michal Schmidt <mschmidt@redhat.com>
 Mike Gorse <mgorse@suse.com>
 Munehiro Matsuda <haro@kgt.co.jp>
+Nicolas Chauvet <kwizart@gmail.com>
 Nikoli <nikoli@lavabit.com>
 Olivier Blin <dev@blino.org>
 Paolo Bonzini <pbonzini@redhat.com>
 Peter Robinson <pbrobinson@fedoraproject.org>
 Pádraig Brady <P@draigBrady.com>
 Quentin Armitage <quentin@armitage.org.uk>
-Radek Vykydal <rvykydal@redhat.com>
+Robert Buchholz <rbu@goodpoint.de>
 Sergey Fionov <fionov@gmail.com>
 Srinivasa T N <seenutn@linux.vnet.ibm.com>
-Stefan Reimer <it@startux.de>
 Thilo Bangert <thilo.bangert@gmx.net>
+Thomas Backlund <tmb@mageia.org>
 Tomasz Torcz <tomek@pipebreaker.pl>
 Vadim Kuznetsov <vadimk@gentoo.org>
 Ville Skyttä <ville.skytta@iki.fi>

Makefile

@@ -1,5 +1,7 @@
-VERSION=025
-GITVERSION=$(shell [ -d .git ] && git rev-list  --abbrev-commit  -n 1 HEAD  |cut -b 1-8)
+-include dracut-version.sh
+
+VERSION = $(shell [ -d .git ] && git describe --abbrev=0 --tags 2>/dev/null || echo $(DRACUT_VERSION))
+GITVERSION = $(shell [ -d .git ] && { v=$$(git describe --tags 2>/dev/null); [ $${v\#*-} != $$v ] && echo -$${v\#*-}; } )
 
 -include Makefile.inc
 
@@ -11,31 +13,34 @@ sysconfdir ?= ${prefix}/etc
 bindir ?= ${prefix}/bin
 mandir ?= ${prefix}/share/man
 CFLAGS ?= -O2 -g -Wall
-CFLAGS += -std=gnu99
+CFLAGS += -std=gnu99  -D_FILE_OFFSET_BITS=64
+bashcompletiondir ?= ${datadir}/bash-completion/completions
 
 man1pages = lsinitrd.1
 
 man5pages = dracut.conf.5
 
-man7pages = dracut.cmdline.7
+man7pages = dracut.cmdline.7 \
+            dracut.bootup.7
 
 man8pages = dracut.8 \
             dracut-catimages.8 \
             mkinitrd.8 \
             modules.d/98systemd/dracut-cmdline.service.8 \
             modules.d/98systemd/dracut-initqueue.service.8 \
+            modules.d/98systemd/dracut-mount.service.8 \
+            modules.d/98systemd/dracut-shutdown.service.8 \
+            modules.d/98systemd/dracut-pre-mount.service.8 \
             modules.d/98systemd/dracut-pre-pivot.service.8 \
             modules.d/98systemd/dracut-pre-trigger.service.8 \
-            modules.d/98systemd/dracut-pre-udev.service.8 \
-            modules.d/98systemd/initrd-switch-root.service.8 \
-            modules.d/98systemd/udevadm-cleanup-db.service.8
+            modules.d/98systemd/dracut-pre-udev.service.8
 
 manpages = $(man1pages) $(man5pages) $(man7pages) $(man8pages)
 
 
-.PHONY: install clean archive rpm testimage test all check AUTHORS doc
+.PHONY: install clean archive rpm testimage test all check AUTHORS doc dracut-version.sh
 
-all: syncheck dracut-version.sh dracut-install
+all: dracut-version.sh dracut-install
 
 DRACUT_INSTALL_OBJECTS = \
         install/dracut-install.o \
@@ -71,13 +76,13 @@ endif
 %.xml: %.asc
 	asciidoc -d manpage -b docbook -o $@ $<
 
-dracut.html: dracut.asc $(manpages)
+dracut.html: dracut.asc $(manpages) dracut.css
 	asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc
 	xsltproc -o dracut.html --xinclude -nonet \
-		--stringparam html.stylesheet \
-		http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \
+		--stringparam custom.css.source dracut.css \
+		--stringparam generate.css.header 1 \
 		http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
-	rm dracut.xml
+	rm -f -- dracut.xml
 
 install: dracut-version.sh
 	mkdir -p $(DESTDIR)$(pkglibdir)
@@ -91,6 +96,7 @@ install: dracut-version.sh
 	install -m 0755 lsinitrd.sh $(DESTDIR)$(bindir)/lsinitrd
 	install -m 0644 dracut.conf $(DESTDIR)$(sysconfdir)/dracut.conf
 	mkdir -p $(DESTDIR)$(sysconfdir)/dracut.conf.d
+	mkdir -p $(DESTDIR)$(pkglibdir)/dracut.conf.d
 	install -m 0755 dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions.sh
 	install -m 0755 dracut-version.sh $(DESTDIR)$(pkglibdir)/dracut-version.sh
 	ln -fs dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions
@@ -106,17 +112,37 @@ ifneq ($(enable_documentation),no)
 endif
 	if [ -n "$(systemdsystemunitdir)" ]; then \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
-		install -m 0644 dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir); \
+		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants; \
 		ln -s ../dracut-shutdown.service \
 		$(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants/dracut-shutdown.service; \
+		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants; \
+		for i in \
+		    dracut-cmdline.service \
+		    dracut-initqueue.service \
+		    dracut-mount.service \
+		    dracut-pre-mount.service \
+		    dracut-pre-pivot.service \
+		    dracut-pre-trigger.service \
+		    dracut-pre-udev.service \
+		    ; do \
+			ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
+			ln -s ../$$i \
+			$(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants/$$i; \
+		done \
 	fi
 	if [ -f install/dracut-install ]; then \
 		install -m 0755 install/dracut-install $(DESTDIR)$(pkglibdir)/dracut-install; \
 	fi
+	mkdir -p $(DESTDIR)${prefix}/lib/kernel/install.d
+	install -m 0755 50-dracut.install $(DESTDIR)${prefix}/lib/kernel/install.d/50-dracut.install
+	install -m 0755 51-dracut-rescue.install $(DESTDIR)${prefix}/lib/kernel/install.d/51-dracut-rescue.install
+	mkdir -p $(DESTDIR)${bashcompletiondir}
+	install -m 0644 dracut-bash-completion.sh $(DESTDIR)${bashcompletiondir}/dracut
+	install -m 0644 lsinitrd-bash-completion.sh $(DESTDIR)${bashcompletiondir}/lsinitrd
 
 dracut-version.sh:
-	@echo "DRACUT_VERSION=$(VERSION)-$(GITVERSION)" > dracut-version.sh
+	@echo "DRACUT_VERSION=$(VERSION)$(GITVERSION)" > dracut-version.sh
 
 clean:
 	$(RM) *~
@@ -125,45 +151,45 @@ clean:
 	$(RM) $(manpages:%=%.xml) dracut.xml
 	$(RM) test-*.img
 	$(RM) dracut-*.rpm dracut-*.tar.bz2
+	$(RM) dracut-version.sh
 	$(RM) dracut-install install/dracut-install $(DRACUT_INSTALL_OBJECTS)
 	$(RM) $(manpages) dracut.html
 	$(MAKE) -C test clean
 
-archive: dracut-$(VERSION)-$(GITVERSION).tar.bz2
-
 dist: dracut-$(VERSION).tar.bz2
 
-dracut-$(VERSION).tar.bz2: doc
+dracut-$(VERSION).tar.bz2: doc syncheck
+	@echo "DRACUT_VERSION=$(VERSION)" > dracut-version.sh
 	git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ > dracut-$(VERSION).tar
 	mkdir -p dracut-$(VERSION)
-	cp $(manpages) dracut.html dracut-$(VERSION)
-	tar -rf dracut-$(VERSION).tar dracut-$(VERSION)/*.[0-9] dracut-$(VERSION)/dracut.html
-	rm -fr dracut-$(VERSION).tar.bz2 dracut-$(VERSION)
+	for i in $(manpages) dracut.html dracut-version.sh; do [ "$${i%/*}" != "$$i" ] && mkdir -p "dracut-$(VERSION)/$${i%/*}"; cp "$$i" "dracut-$(VERSION)/$$i"; done
+	tar --owner=root --group=root -rf dracut-$(VERSION).tar $$(find dracut-$(VERSION) -type f)
+	rm -fr -- dracut-$(VERSION).tar.bz2 dracut-$(VERSION)
 	bzip2 -9 dracut-$(VERSION).tar
-	rm -f dracut-$(VERSION).tar
+	rm -f -- dracut-$(VERSION).tar
 
-rpm: dracut-$(VERSION).tar.bz2
+rpm: dracut-$(VERSION).tar.bz2 syncheck
 	rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
 	cp dracut-$(VERSION).tar.bz2 "$$rpmbuild"; \
 	LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
 	(cd "$$rpmbuild"; rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
 	        --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
 		--define "_rpmdir $$PWD" -ba dracut.spec; ) && \
-	( mv "$$rpmbuild"/$$(arch)/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr "$$rpmbuild"; ls *.rpm )
+	( mv "$$rpmbuild"/$$(arch)/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr -- "$$rpmbuild"; ls *.rpm )
 
 syncheck:
-	@ret=0;for i in dracut-initramfs-restore.sh dracut-logger.sh \
-                        modules.d/99base/init.sh modules.d/*/*.sh; do \
+	@ret=0;for i in dracut-initramfs-restore.sh modules.d/*/*.sh; do \
                 [ "$${i##*/}" = "module-setup.sh" ] && continue; \
                 read line < "$$i"; [ "$${line#*bash*}" != "$$line" ] && continue; \
-		dash -n "$$i" ; ret=$$(($$ret+$$?)); \
+		[ $$V ] && echo "posix syntax check: $$i"; bash --posix -n "$$i" ; ret=$$(($$ret+$$?)); \
+		[ $$V ] && echo "checking for [[: $$i"; if grep -Fq '[[ ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains [["; fi \
 	done;exit $$ret
 	@ret=0;for i in *.sh mkinitrd-dracut.sh modules.d/*/*.sh \
 	                modules.d/*/module-setup.sh; do \
-		bash -n "$$i" ; ret=$$(($$ret+$$?)); \
+		[ $$V ] && echo "bash syntax check: $$i"; bash -n "$$i" ; ret=$$(($$ret+$$?)); \
 	done;exit $$ret
 
-check: all syncheck
+check: all syncheck rpm
 	@[ "$$EUID" == "0" ] || { echo "'check' must be run as root! Please use 'sudo'."; exit 1; }
 	@$(MAKE) -C test check
 
@@ -178,7 +204,7 @@ testimages: all
 	@echo wrote  test-dracut.img
 
 hostimage: all
-	./dracut.sh -H -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	./dracut.sh -H -l -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img
 
 AUTHORS:

NEWS

@@ -1,3 +1,261 @@
+dracut-034
+==========
+- do not run dhcp on parts of assembled network interfaces (bond, bridge)
+- add option to turn on/off prelinking
+    --prelink, --noprelink
+    do_prelink=[yes|no]
+- add ACPI table overriding
+- do not log to syslog/kmsg/journal for UID != 0
+- lvm/mdraid: Fix LVM on MD activation
+- bcache module removed (now in bcache-tools upstream)
+- mdadm: also install configs from /etc/mdadm.conf.d
+- fixes for mdadm-3.2.6+
+- mkinitrd: better compat support for SUSE
+- fcoe: add FCoE UEFI boot device support
+- rootfs-block: add support for the rootfallback= kernel cmdline option
+
+Contributions from:
+Thomas Renninger
+Alexander Tsoy
+Peter Rajnoha
+WANG Chao
+Harald Hoyer
+
+
+dracut-033
+==========
+- improved hostonly device recognition
+- improved hostonly module recognition
+- add dracut.css for dracut.html
+- do not install udev rules from /etc in generic mode
+- fixed LABEL= parsing for swap devices
+- fixed iBFT network setup
+- url-lib.sh: handle 0-size files with curl
+- dracut.asc: document debugging dracut on shutdown
+- if rd.md=0, use dmraid for imsm and ddf
+- skip empty dracut modules
+- removed caching of kernel cmdline
+- fixed iso-scan, if the loop device driver is a kernel module
+- bcache: support new blkid
+- fixed ifup udev rules
+- ifup with dhcp, if no "ip=" specified for the interface
+
+Contributions from:
+WANG Chao
+Colin Walters
+Harald Hoyer
+
+
+dracut-032
+==========
+- add parameter --print-cmdline
+    This prints the kernel command line parameters for the current disk
+    layout.
+    $ dracut --print-cmdline
+    rd.luks.uuid=luks-e68c8906-6542-4a26-83c4-91b4dd9f0471
+    rd.lvm.lv=debian/root rd.lvm.lv=debian/usr root=/dev/mapper/debian-root
+    rootflags=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered
+    rootfstype=ext4
+- dracut.sh: add --persistent-policy option and persistent_policy conf option
+    --persistent-policy <policy>:
+        Use <policy> to address disks and partitions.
+        <policy> can be any directory name found in /dev/disk.
+        E.g. "by-uuid", "by-label"
+- dracut now creates the initramfs without udevadm
+  that means the udev database does not have to populated
+  and the initramfs can be built in a chroot with
+  /sys /dev /proc mounted
+- renamed dracut_install() to inst_multiple() for consistent naming
+- if $libdirs is unset, fall back to ld.so.cache paths
+- always assemble /usr device in initramfs
+- bash module added (disable it, if you really want dash)
+- continue to boot, if the main loop times out, in systemd mode
+- removed inst*() shell pure versions, dracut-install binary is in charge now
+- fixed ifcfg file generation for vlan
+- do not include adjtime and localtime anymore
+- fixed generation of zfcp.conf of CMS setups
+- install vt102 terminfo
+  dracut_install() is still there for backwards compat
+- do not strip files in FIPS mode
+- fixed iBFT interface configuration
+- fs-lib: install fsck and fsck.ext*
+- shutdown: fixed killall_proc_mountpoint()
+- network: also wait for ethernet interfaces to setup
+- fixed checking for FIPS mode
+
+Contributions from:
+Harald Hoyer
+WANG Chao
+Baoquan He
+Daniel Schaal
+Dave Young
+James Lee
+Radek Vykydal
+
+
+dracut-031
+==========
+- do not include the resume dracut module in hostonly mode,
+  if no swap is present
+- don't warn twice about omitted modules
+- use systemd-cat for logging on systemd systems, if logfile is unset
+- fixed PARTUUID parsing
+- support kernel module signing keys
+- do not install the usrmount dracut module in hostonly mode,
+  if /sbin/init does not live in /usr
+- add debian udev rule files
+- add support for bcache
+- network: handle bootif style interfaces
+  e.g. ip=77-77-6f-6f-64-73:dhcp
+- add support for kmod static devnodes
+- add vlan support for iBFT
+
+Contributions from:
+Harald Hoyer
+Amadeusz Żołnowski
+Brandon Philips
+Colin Walters
+James Lee
+Kyle McMartin
+Peter Jones
+
+dracut-030
+==========
+- support new persistent network interface names
+- fix findmnt calls, prevents hang on stale NFS mounts
+- add systemd.slice and slice.target units
+- major shell cleanup
+- support root=PARTLABEL= and root=PARTUUID=
+- terminfo: only install l/linux v/vt100 and v/vt220
+- unset all LC_* and LANG, 10% faster
+- fixed dependency loop for dracut-cmdline.service
+- do not wait_for_dev for the root devices
+- do not wait_for_dev for devices, if dracut-initqueue is not needed
+- support early microcode loading with --early-microcode
+- dmraid, let dmraid setup its own partitions
+- sosreport renamed to rdsosreport
+
+Contributions from:
+Harald Hoyer
+Konrad Rzeszutek Wilk
+WANG Chao
+
+dracut-029
+==========
+- wait for IPv6 autoconfiguration
+- i18n: make the default font configurable
+  To set the default font for your distribution, add
+  i18n_default_font="latarcyrheb-sun16"
+  to your /lib/dracut/dracut.conf.d/01-dist.conf distribution config.
+- proper handle "rd.break" in systemd mode before switch-root
+- systemd: make unit files symlinks
+- build without dash requirement
+- add dracut-shutdown.service.8 manpage
+- handle MACs for "ip="
+  "ip=77-77-6f-6f-64-73:dhcp"
+- don't explode when mixing BOOTIF and ip=
+- 90lvm/module-setup.sh: redirect error message of lvs to /dev/null
+
+Contributions from:
+Harald Hoyer
+Will Woods
+Baoquan He
+
+dracut-028
+==========
+- full integration of crypto devs in systemd logic
+- support for bridge over team and vlan tagged team
+- support multiple bonding interfaces
+- new kernel command line param "rd.action_on_fail"
+  to control the emergency action
+- support for bridge over a vlan tagged interface
+- support for "iso-scan/filename" kernel parameter
+- lsinitrd got some love and does not use "file" anymore
+- fixed issue with noexec mounted tmp dirs
+- FIPS mode fixed
+- dracut_install got some love
+- fixed some /usr mounting problems
+- ifcfg dracut module got some love and fixes
+- default installed font is now latarcyrheb-sun16
+- new parameters rd.live.dir and rd.live.squashimg
+- lvm: add tools for thin provisioning
+- also install non-hwcap libs
+- setup correct system time and time zone in initrd
+- s390: fixed cms setup
+- add systemd-udevd persistent network interface naming
+
+Contributions from:
+Harald Hoyer
+Kamil Rytarowski
+WANG Chao
+Baoquan He
+Adam Williamson
+Colin Guthrie
+Dan Horák
+Dave Young
+Dennis Gilmore
+Dennis Schridde
+
+dracut-027
+==========
+- dracut now has bash-completion
+- require bash version 4
+- systemd module now requires systemd >= 199
+- dracut makes use of native systemd initrd units
+- added hooks for new-kernel-pkg and kernel-install
+- hostonly is now default for fedora
+- comply with the BootLoaderSpec paths
+  http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec
+- added rescue module
+- host_fs_types is now a hashmap
+- new dracut argument "--regenerate-all"
+- new dracut argument "--noimageifnotneeded"
+- new man page dracut.bootup
+- install all host filesystem drivers
+- use -D_FILE_OFFSET_BITS=64 to build dracut-install
+
+dracut-026
+==========
+- introduce /usr/lib/dracut/dracut.conf.d/ drop-in directory
+
+  /usr/lib/dracut/dracut.conf.d/*.conf can be overwritten by the same
+  filenames in /etc/dracut.conf.d.
+
+  Packages should use /usr/lib/dracut/dracut.conf.d rather than
+  /etc/dracut.conf.d for drop-in configuration files.
+
+  /etc/dracut.conf and /etc/dracut.conf.d belong to the system administrator.
+
+- uses systemd-198 native initrd units
+- totally rely on the fstab-generator in systemd mode for block devices
+- dracut systemd now uses dracut.target rather than basic.target
+- dracut systemd services optimize themselves away
+- fixed hostonly parameter generation
+- turn off curl globbing (fixes IPv6)
+- modify the udev rules on install and not runtime time
+- enable initramfs building without kernel modules (fixed regression)
+- in the initqueue/timeout,
+  reset the main loop counter, as we see new udev events or initqueue/work
+- fixed udev rule installation
+
+dracut-025
+==========
+- do not strip signed kernel modules
+- add sosreport script and generate /run/initramfs/sosreport.txt
+- make short uuid specification for allow-discards work
+- turn off RateLimit for the systemd journal
+- fixed MAC address assignment
+- add systemd checkisomd5 service
+- splitout drm kernel modules from plymouth module
+- add 'swapoff' to initramfs to fix shutdown/reboot
+- add team device support
+- add pre-shutdown hook
+- kill all processes in shutdown and report remaining ones
+- "--device" changed to "--add-device" and "add_device=" added for conf files
+- add memory usage trace to different hook points
+- cope with optional field #7 in /proc/self/mountinfo
+- lots of small bugfixes
+
 dracut-024
 ==========
 - new dracut option "--device"

TODO

@@ -7,7 +7,6 @@ Items are ordered in priority.
 INITRAMFS TODO
 
 - use info and warn prefix
-- add sosreport
 - generate systemd unit dracut-initramfs-restore in /run/systemd dynamically
 - put "root=" parsing hooks in separate hook dir
 - call "root=" parsing hooks after getting new rootpath from dhcp
@@ -20,18 +19,19 @@ INITRAMFS TODO
 - disable write-ifcfg https://bugzilla.redhat.com/show_bug.cgi?id=840784
 - check for /var to be mounted in convertfs https://bugzilla.redhat.com/show_bug.cgi?id=848172
 - probably fix "--include" https://bugzilla.redhat.com/show_bug.cgi?id=849338
-- iscsi livecd boot
 
 GENERATOR TODO
 
+- remove wait for swap devs, if no "resume=" is given on the kernel command line
+- add presets (predefined set of modules)
 - add interpreter/plugin-scripts to be sourced at the beginning or end (can use dracut-functions)
-- provide "installkernel" and "new-kernel-pkg"
 - add mechanism for module specific command line options
 - pkg-config integration, to make it easy for other packages to use us.
-- add recovery image creator (mkrecovery)
 - default module specification could use some work
 - udev rule copying, as mentioned above, is a bit too hard-coded
 
+- dracut-install parse LD_SHOW_AUXV="" AT_PLATFORM for lib install
+
 CODE TODO
 
 - document more functions

configure

@@ -25,6 +25,7 @@ read_arg() {
         # return 1 to indicate they should do it instead.
         return 1
     fi
+    return 0
 }
 
 while (($# > 0)); do
@@ -36,18 +37,42 @@ while (($# > 0)); do
         --sbindir) read_arg sbindir "$@" || shift;;
         --mandir) read_arg mandir "$@" || shift;;
         --disable-documentation) enable_documentation=no;;
+        --program-prefix) read_arg programprefix "$@" || shift;;
+        --exec-prefix) read_arg execprefix "$@" || shift;;
+        --bindir) read_arg bindir "$@" || shift;;
+        --includedir) read_arg includedir "$@" || shift;;
+        --libexecdir) read_arg libexecdir "$@" || shift;;
+        --localstatedir) read_arg localstatedir "$@" || shift;;
+        --sharedstatedir) read_arg sharedstatedir "$@" || shift;;
+        --infodir) read_arg infodir "$@" || shift;;
+        --systemdsystemunitdir) read_arg systemdsystemunitdir "$@" || shift;;
+        --bashcompletiondir) read_arg bashcompletiondir "$@" || shift;;
         *) echo "Ignoring unknown option '$1'";;
     esac
     shift
 done
 
-cat > Makefile.inc.tmp <<EOF
+cat > Makefile.inc.$$ <<EOF
 prefix ?= ${prefix}
 libdir ?= ${libdir:-${prefix}/lib}
 datadir ?= ${datadir:-${prefix}/share}
 sysconfdir ?= ${sysconfdir:-${prefix}/etc}
 sbindir ?= ${sbindir:-${prefix}/sbin}
 mandir ?= ${mandir:-${prefix}/share/man}
-enable_documentation ?= ${enable_documentation}
+enable_documentation ?= ${enable_documentation:-yes}
+bindir ?= ${bindir:-${prefix}/bin}
 EOF
-mv Makefile.inc.tmp Makefile.inc
+
+{
+    [[ $programprefix ]] && echo "programprefix ?= ${programprefix}"
+    [[ $execprefix ]] && echo "execprefix ?= ${execprefix}"
+    [[ $includedir ]] && echo "includedir ?= ${includedir}"
+    [[ $libexecdir ]] && echo "libexecdir ?= ${libexecdir}"
+    [[ $localstatedir ]] && echo "localstatedir ?= ${localstatedir}"
+    [[ $sharedstatedir ]] && echo "sharedstatedir ?= ${sharedstatedir}"
+    [[ $infodir ]] && echo "infodir ?= ${infodir}"
+    [[ $systemdsystemunitdir ]] && echo "systemdsystemunitdir ?= ${systemdsystemunitdir}"
+    [[ $bashcompletiondir ]] && echo "bashcompletiondir ?= ${bashcompletiondir}"
+} >> Makefile.inc.$$
+
+mv Makefile.inc.$$ Makefile.inc

dracut-bash-completion.sh

@@ -0,0 +1,79 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Copyright 2013 Red Hat, Inc.  All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+__contains_word () {
+        local word=$1; shift
+        for w in $*; do [[ $w = $word ]] && return 0; done
+        return 1
+}
+
+_dracut() {
+        local field_vals= cur=${COMP_WORDS[COMP_CWORD]} prev=${COMP_WORDS[COMP_CWORD-1]}
+        local -A OPTS=(
+                [STANDALONE]='-f -v -q -l -H -h -M -N
+                              --ro-mnt --force --kernel-only --no-kernel --strip --nostrip
+                              --hardlink --nohardlink --noprefix --mdadmconf --nomdadmconf
+                              --lvmconf --nolvmconf --debug --profile --verbose --quiet
+                              --local --hostonly --no-hostonly --fstab --help --bzip2 --lzma
+                              --xz --no-compress --gzip --list-modules --show-modules --keep
+                              --printsize --regenerate-all --noimageifnotneeded --early-microcode
+                              --no-early-microcode --print-cmdline --prelink --noprelink'
+
+                       [ARG]='-a -m -o -d -I -k -c -L --kver --add --force-add --add-drivers
+                              --omit-drivers --modules --omit --drivers --filesystems --install
+                              --fwdir --libdirs --fscks --add-fstab --mount --device --nofscks
+                              --kmoddir --conf --confdir --tmpdir --stdlog --compress --prefix
+                              --kernel-cmdline --sshkey --persistent-policy'
+        )
+
+        if __contains_word "$prev" ${OPTS[ARG]}; then
+                case $prev in
+                        --kmoddir|-k|--fwdir|--confdir|--tmpdir)
+                                comps=$(compgen -d -- "$cur")
+                                compopt -o filenames
+                        ;;
+                        -c|--conf|--sshkey|--add-fstab|--add-device|-I|--install)
+                                comps=$(compgen -f -- "$cur")
+                                compopt -o filenames
+                        ;;
+                        -a|-m|-o|--add|--modules|--omit)
+                                comps=$(dracut --list-modules 2>/dev/null)
+                        ;;
+                        --persistent-policy)
+                                comps=$(cd /dev/disk/; echo *)
+                        ;;
+                        --kver)
+                                comps=$(cd /lib/modules; echo [0-9]*)
+                        ;;
+                        *)
+                                return 0
+                        ;;
+                esac
+                COMPREPLY=( $(compgen -W '$comps' -- "$cur") )
+                return 0
+        fi
+
+        if [[ $cur = -* ]]; then
+                COMPREPLY=( $(compgen -W '${OPTS[*]}' -- "$cur") )
+                return 0
+        fi
+}
+
+complete -F _dracut dracut

dracut-catimages.sh

@@ -118,11 +118,11 @@ fi
 images+=($@)
 
 dinfo "Using base image $baseimage"
-cat "$baseimage" > "$outfile"
+cat -- "$baseimage" > "$outfile"
 
 for i in "${images[@]}"; do
     dinfo "Appending $i"
-    cat "$i" >> "$outfile"
+    cat -- "$i" >> "$outfile"
 done
 
 dinfo "Created $outfile"

dracut-initramfs-restore.sh

@@ -1,18 +1,29 @@
-#!/bin/sh
+#!/bin/bash
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 set -e
+
+KERNEL_VERSION="$(uname -r)"
+
+[[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
+
+if [[ $MACHINE_ID ]] && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
+    IMG="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
+fi
+[[ -f $IMG ]] || IMG="/boot/initramfs-${KERNEL_VERSION}.img"
+
 cd /run/initramfs
-IMG="/boot/initramfs-$(uname -r).img"
+
 [ -f .need_shutdown -a -f "$IMG" ] || exit 1
-if zcat "$IMG"  | cpio -id >/dev/null 2>&1; then
-    rm .need_shutdown
-elif xzcat "$IMG"  | cpio -id >/dev/null 2>&1; then
-    rm .need_shutdown
+if zcat "$IMG"  | cpio -id --quiet >/dev/null; then
+    rm -f -- .need_shutdown
+elif xzcat "$IMG"  | cpio -id --quiet >/dev/null; then
+    rm -f -- .need_shutdown
 else
     # something failed, so we clean up
-    rm -f /run/initramfs/shutdown
+    echo "Unpacking of $IMG to /run/initramfs failed" >&2
+    rm -f -- /run/initramfs/shutdown
     exit 1
 fi
 

dracut-logger.sh

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 et filetype=sh
 #
@@ -117,31 +117,48 @@ dlog_init() {
     if [ -z "$fileloglvl" ]; then
         [ -w "$logfile" ] && fileloglvl=4 || fileloglvl=0
     elif (( $fileloglvl > 0 )); then
-        __oldumask=$(umask)
-        umask 0377
-        ! [ -e "$logfile" ] && >"$logfile"
-        umask $__oldumask
-        if [ -w "$logfile" -a -f "$logfile" ]; then
+        if [[ $logfile ]]; then
+            __oldumask=$(umask)
+            umask 0377
+            ! [ -e "$logfile" ] && >"$logfile"
+            umask $__oldumask
+            if [ -w "$logfile" -a -f "$logfile" ]; then
             # Mark new run in the log file
-            echo >>"$logfile"
-            if command -v date >/dev/null; then
-                echo "=== $(date) ===" >>"$logfile"
+                echo >>"$logfile"
+                if command -v date >/dev/null; then
+                    echo "=== $(date) ===" >>"$logfile"
+                else
+                    echo "===============================================" >>"$logfile"
+                fi
+                echo >>"$logfile"
             else
-                echo "===============================================" >>"$logfile"
-            fi
-            echo >>"$logfile"
-        else
             # We cannot log to file, so turn this facility off.
-            fileloglvl=0
-            ret=1
-            errmsg="'$logfile' is not a writable file"
+                fileloglvl=0
+                ret=1
+                errmsg="'$logfile' is not a writable file"
+            fi
         fi
     fi
 
+    if (( $UID  != 0 )); then
+        kmsgloglvl=0
+        sysloglvl=0
+    fi
+
     if (( $sysloglvl > 0 )); then
-        if ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null
-        then
+        if [[ -d /run/systemd/journal ]] \
+            && type -P systemd-cat &>/dev/null \
+            && systemctl --quiet is-active systemd-journald.socket &>/dev/null \
+            && { echo "dracut-$DRACUT_VERSION" | systemd-cat -t 'dracut' &>/dev/null; } ; then
+            readonly _dlogdir="$(mktemp --tmpdir="$TMPDIR/" -d -t dracut-log.XXXXXX)"
+            readonly _systemdcatfile="$_dlogdir/systemd-cat"
+            mkfifo "$_systemdcatfile"
+            readonly _dlogfd=15
+            systemd-cat -t 'dracut' <"$_systemdcatfile" &
+            exec 15>"$_systemdcatfile"
+        elif ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null; then
             # We cannot log to syslog, so turn this facility off.
+            kmsgloglvl=$sysloglvl
             sysloglvl=0
             ret=1
             errmsg="No '/dev/log' or 'logger' included for syslog logging"
@@ -165,34 +182,34 @@ dlog_init() {
     export maxloglvl
 
 
-    if (($stdloglvl < 6)) && (($kmsgloglvl < 6)) && (($fileloglvl < 6)); then
+    if (($stdloglvl < 6)) && (($kmsgloglvl < 6)) && (($fileloglvl < 6)) && (($sysloglvl < 6)); then
         unset dtrace
         dtrace() { :; };
     fi
 
-    if (($stdloglvl < 5)) && (($kmsgloglvl < 5)) && (($fileloglvl < 5)); then
+    if (($stdloglvl < 5)) && (($kmsgloglvl < 5)) && (($fileloglvl < 5)) && (($sysloglvl < 5)); then
         unset ddebug
         ddebug() { :; };
     fi
 
-    if (($stdloglvl < 4)) && (($kmsgloglvl < 4)) && (($fileloglvl < 4)); then
+    if (($stdloglvl < 4)) && (($kmsgloglvl < 4)) && (($fileloglvl < 4)) && (($sysloglvl < 4)); then
         unset dinfo
         dinfo() { :; };
     fi
 
-    if (($stdloglvl < 3)) && (($kmsgloglvl < 3)) && (($fileloglvl < 3)); then
+    if (($stdloglvl < 3)) && (($kmsgloglvl < 3)) && (($fileloglvl < 3)) && (($sysloglvl < 3)); then
         unset dwarn
         dwarn() { :; };
         unset dwarning
         dwarning() { :; };
     fi
 
-    if (($stdloglvl < 2)) && (($kmsgloglvl < 2)) && (($fileloglvl < 2)); then
+    if (($stdloglvl < 2)) && (($kmsgloglvl < 2)) && (($fileloglvl < 2)) && (($sysloglvl < 2)); then
         unset derror
         derror() { :; };
     fi
 
-    if (($stdloglvl < 1)) && (($kmsgloglvl < 1)) && (($fileloglvl < 1)); then
+    if (($stdloglvl < 1)) && (($kmsgloglvl < 1)) && (($fileloglvl < 1)) && (($sysloglvl < 1)); then
         unset dfatal
         dfatal() { :; };
     fi
@@ -306,15 +323,23 @@ _dlvl2syslvl() {
 _do_dlog() {
     local lvl="$1"; shift
     local lvlc=$(_lvl2char "$lvl") || return 0
-    local msg="$lvlc: $*"
+    local msg="$*"
+    local lmsg="$lvlc: $*"
 
     (( $lvl <= $stdloglvl )) && echo "$msg" >&2
+
     if (( $lvl <= $sysloglvl )); then
-        logger -t "dracut[$$]" -p $(_lvl2syspri $lvl) "$msg"
+        if [[ "$_dlogfd" ]]; then
+            echo "<$(_dlvl2syslvl $lvl)>$msg" >&$_dlogfd
+        else
+            logger -t "dracut[$$]" -p $(_lvl2syspri $lvl) -- "$msg"
+        fi
     fi
+
     if (( $lvl <= $fileloglvl )) && [[ -w "$logfile" ]] && [[ -f "$logfile" ]]; then
-        echo "$msg" >>"$logfile"
+        echo "$lmsg" >>"$logfile"
     fi
+
     (( $lvl <= $kmsgloglvl )) && \
         echo "<$(_dlvl2syslvl $lvl)>dracut[$$] $msg" >/dev/kmsg
 }

dracut.8.asc

@@ -31,10 +31,10 @@ early userspace.
 For a complete list of kernel command line options see *dracut.cmdline*(7).
 
 If you are dropped to an emergency shell, while booting your initramfs,
-the file _/run/initramfs/sosreport.txt_ is created, which can be safed to a
+the file _/run/initramfs/rdsosreport.txt_ is created, which can be safed to a
 (to be mounted by hand) partition (usually /boot) or a USB stick.
 Additional debugging info can be produced by adding **rd.debug** to the kernel command line.
-_/run/initramfs/sosreport.txt_ contains all logs and the output of some tools.
+_/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools.
 It should be attached to any report about dracut problems.
 
 EXAMPLE
@@ -75,12 +75,12 @@ version is:
 ----
 
 If you want to create lighter, smaller initramfs images, you may want to specify
-the --host-only or -H option. Using this option, the resulting image will
+the --hostonly or -H option. Using this option, the resulting image will
 contain only those dracut modules, kernel modules and filesystems, which are
 needed to boot this specific machine. This has the drawback, that you can't put
 the disk on another controller or machine, and that you can't switch to another
 root filesystem, without recreating the initramfs image. The usage of the
---host-only option is only for experts and you will have to keep the broken
+--hostonly option is only for experts and you will have to keep the broken
 pieces. At least keep a copy of a general purpose image (and corresponding
 kernel) as a fallback to rescue your system.
 
@@ -225,6 +225,15 @@ example:
 **--no-kernel**::
     do not install kernel drivers and firmware files
 
+**--early-microcode**::
+    Combine early microcode with ramdisk
+
+**--no-early-microcode**::
+    Do not combine early microcode with ramdisk
+
+**--print-cmdline**::
+    print the kernel command line for the current disk layout
+
 **--mdadmconf**::
     include local _/etc/mdadm.conf_
 
@@ -260,6 +269,12 @@ example:
 **--nostrip**::
     do not strip binaries in the initramfs
 
+**--prelink**::
+    prelink binaries in the initramfs (default)
+
+**--noprelink**::
+    do not prelink binaries in the initramfs
+
 **--hardlink**::
     hardlink files in the initramfs (default)
 
@@ -322,6 +337,11 @@ provide a valid _/etc/fstab_.
 **-N, --no-hostonly**::
     Disable Host-Only mode
 
+**--persistent-policy** _<policy>_::
+    Use _<policy>_ to address disks and partitions.
+    _<policy>_ can be any directory name found in /dev/disk.
+    E.g. "by-uuid", "by-label"
+
 **--fstab**::
     Use _/etc/fstab_ instead of _/proc/self/mountinfo_.
 
@@ -376,7 +396,7 @@ will not be able to boot. Equivalent to "--compress=bzip2"
 [WARNING]
 ====
 Make sure your kernel has lzma decompression support compiled in, otherwise you
-will not be able to boot. Equivalent to "--compress=lzma -9"
+will not be able to boot. Equivalent to "lzma --compress=lzma -9"
 ====
 
 **--xz**::
@@ -385,8 +405,7 @@ will not be able to boot. Equivalent to "--compress=lzma -9"
 [WARNING]
 ====
 Make sure your kernel has xz decompression support compiled in, otherwise you
-will not be able to boot. Equivalent to "--compress=xz --check=crc32
---lzma2=dict=1MiB"
+will not be able to boot. Equivalent to "lzma --compress=xz --check=crc32 --lzma2=dict=1MiB"
 ====
 
 **--compress** _<compressor>_::
@@ -409,6 +428,31 @@ will not be able to boot. Equivalent to "--compress=xz --check=crc32
 **--keep**::
     Keep the initramfs temporary directory for debugging purposes.
 
+**--printsize**::
+    Print out the module install size
+
+**--profile**:
+    Output profile information of the build process
+
+**--ro-mnt**:
+    Mount / and /usr read-only by default.
+
+**-L, --stdlog** _<level>_::
+    [0-6] Specify logging level (to standard error)
+----
+          0 - suppress any messages
+          1 - only fatal errors
+          2 - all errors
+          3 - warnings
+          4 - info
+          5 - debug info (here starts lots of output)
+          6 - trace info (and even more)
+----
+
+**--regenerate-all**::
+    Regenerate all initramfs images at the default location with the kernel versions found on the system.
+    Additional parameters are passed through.
+
 FILES
 -----
 _/var/log/dracut.log_::
@@ -424,6 +468,9 @@ _/etc/dracut.conf_::
 _/etc/dracut.conf.d/*.conf_::
     see dracut.conf5
 
+_/usr/lib/dracut/dracut.conf.d/*.conf_::
+    see dracut.conf5
+
 Configuration in the initramfs
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 _/etc/conf.d/_::

dracut.asc

@@ -120,6 +120,9 @@ final cleanup tasks. On an initramfs, the initial root file system cannot be
 rotated away. Instead, it is simply emptied and the final root file system
 mounted over the top.
 
+If the systemd module is used in the initramfs, the ordering of the services
+started looks like <<dracutbootup7>>.
+
 == Dracut on shutdown
 
 On a systemd driven system, the dracut initramfs is also used for the shutdown procedure.
@@ -486,7 +489,7 @@ dracut shell commands are printed as they are executed
 ----
 # journalctl -ab
 ----
-. With dracut >= 025 the file /run/initramfs/sosreport.txt is generated, which contains all the logs and the output of all significant tools, which are mentioned later.
+. With dracut >= 025 the file /run/initramfs/rdsosreport.txt is generated, which contains all the logs and the output of all significant tools, which are mentioned later.
 
 If you want to save that output, simply mount /boot by hand or insert an USB stick and mount that.
 Then you can store the output for later inspection.
@@ -531,19 +534,19 @@ all files in _/etc/dracut.conf.d/*.conf_
 As well as the information from <<all-bug-reports>> include the following
 information:
 
-* Include physical volume information by running the command: 
+* Include physical volume information by running the command:
 +
 ----
 # lvm pvdisplay
 ----
 +
-* Include volume group information by running the command: 
+* Include volume group information by running the command:
 +
 ----
 # lvm vgdisplay
 ----
 +
-* Include logical volume information by running the command: 
+* Include logical volume information by running the command:
 +
 ----
 # lvm lvdisplay
@@ -554,7 +557,7 @@ information:
 As well as the information from <<all-bug-reports>>, include the following
 information:
 
-* If using software RAID disk partitions, please include the output of 
+* If using software RAID disk partitions, please include the output of
 +
 ----
 # cat /proc/mdstat
@@ -659,7 +662,7 @@ title Fedora (2.6.29.5-191.fc11.x86_64)
 No root device found
 Dropping to debug shell.
 
-# 
+#
 ----
 +
 . Use this shell prompt to gather the information requested above (see <<all-bug-reports>>).
@@ -679,7 +682,7 @@ The exact method for locating and preparing will vary. However, to continue with
 a successful boot, the objective is to locate your root volume and create a
 symlink _/dev/root_ which points to the file system. For example, the following
 example demonstrates accessing and booting a root volume that is an encrypted
-LVM Logical volume. 
+LVM Logical volume.
 
 . Inspect your partitions using parted
 +
@@ -695,7 +698,7 @@ Number  Start   End     Size    Type      File system  Flags
 ----
 +
 . You recall that your root volume was a LVM logical volume. Scan and activate
-any logical volumes. 
+any logical volumes.
 +
 ----
 # lvm vgscan
@@ -721,7 +724,7 @@ Installation Guide, you unlock your encrypted root volume.
 # UUID=$(cryptsetup luksUUID /dev/mapper/linux-root)
 # cryptsetup luksOpen /dev/mapper/linux-root luks-$UUID
 Enter passphrase for /dev/mapper/linux-root:
-Key slot 0 unlocked. 
+Key slot 0 unlocked.
 ----
 +
 . Next, make a symbolic link to the unlocked root volume
@@ -741,6 +744,23 @@ the dracut shell
 ==== Additional dracut boot parameters
 For more debugging options, see <<dracutkerneldebug>> in <<dracutcmdline7>>.
 
+
+[[debugging-dracut-on-shutdown]]
+==== Debugging dracut on shutdown
+
+To debug the shutdown sequence on systemd systems, you can _rd.break_
+on _pre-shutdown_ or _shutdown_.
+
+To do this from an already booted system:
+----
+# mkdir -p /run/initramfs/etc/cmdline.d
+# echo "rd.break=pre-shutdown" > /run/initramfs/etc/cmdline.d/debug.conf
+# touch /run/initramfs/.need_shutdown
+----
+
+This will give you a dracut shell after the system pivot'ed back in the initramfs.
+
+
 = Developer Manual
 
 == dracut Components
@@ -774,24 +794,11 @@ scripts and udev rules.
 [[stages]]
 == Boot Process Stages
 
-The init script in _99base_ is the main script, which prepares the root file
-system for usage, runs udev, mounts the real root device, kills the remaining
-processes, and switches to the real root device for further booting. dracut
-modules can insert custom script at various points, to control the boot process.
+dracut modules can insert custom script at various points, to control the boot
+process.
 These hooks are plain directories containing shell scripts ending with ".sh",
 which are sourced by init.
-Common used functions are in _dracut-lib.sh_, which can be sourced by any script.      
-
-
-
-=== Basic Setup
-
-The first thing init does, is to mount _/proc_ and _/sys_ and manually create
-the basic device nodes and symbolic links in _/dev_ needed to execute basic
-commands. Then logging is setup according to kernel command line arguments.
-_/dev/pts_ and _/dev/shm_ are mounted and the first hook is sourced.
-
-
+Common used functions are in _dracut-lib.sh_, which can be sourced by any script.
 
 === Hook: cmdline
 
@@ -810,63 +817,49 @@ This hook is executed right after the cmdline hook and a check if root and
 rootok were set. Here modules can take action with the final root, and before
 udev has been run.
 
-
-
 === Start Udev
 
 Now udev is started and the logging for udev is setup.
 
-
-
 === Hook: pre-trigger
 
 In this hook, you can set udev environment variables with **udevadm control
 --property=KEY=_value_** or control the further execution of udev with
 udevadm.
 
-
-
 === Trigger Udev
 
 udev is triggered by calling udevadm trigger, which sends add events for all
-devices and subsystems. 
-
-
+devices and subsystems.
 
 === Main Loop
 
-Now the main loop of 99base/init begins. Here we loop until udev has settled and
-all scripts in _initqueue/finished_ returned true. In this loop there are three
-hooks, where scripts can be inserted by calling /sbin/initqueue. 
-
-
+In the main loop of dracut loops until udev has settled and
+all scripts in _initqueue/finished_ returned true.
+In this loop there are three hooks, where scripts can be inserted
+by calling /sbin/initqueue.
 
 ==== Initqueue
 
 This hook gets executed every time a script is inserted here, regardless of the
 udev state.
 
-
-
 ==== Initqueue settled
 
-This hooks gets executed every time udev has settled.
-
+This hooks (initqueue/settled) gets executed every time udev has settled.
 
 
 ==== Initqueue timeout
 
-This hooks gets executed, when the main loop counter becomes half of the
+This hooks (initqueue/timeout) gets executed, when the main loop counter becomes half of the
 rd.retry counter.
 
-
-
 ==== Initqueue finished
 
-This hook is called after udev has settled and if all scripts herein return 0
-the main loop will be ended.
-
-
+This hook (initqueue/finished) is called after udev has settled and
+if all scripts herein return 0 the main loop will be ended.
+Abritary scripts can be added here, to loop in the
+initqueue until something happens, which a dracut module wants to wait for.
 
 === Hook: pre-mount
 
@@ -874,20 +867,15 @@ Before the root device is mounted all scripts in the hook pre-mount are
 executed. In some cases (e.g. NFS) the real root device is already mounted,
 though.
 
-
-
 === Hook: mount
 
 This hook is mainly to mount the real root device.
 
-
-
 === Hook: pre-pivot
 
 This hook is called before cleanup hook, This is a good place for
 actions other than cleanups which need to be called before pivot.
 
-
 === Hook: cleanup
 
 This hook is the last hook and is called before init finally switches root to
@@ -897,22 +885,18 @@ needed anymore.
 
 === Cleanup and switch_root
 
-Init kills all udev processes, cleans up the environment, sets up the arguments
-for the real init process and finally calls switch_root. switch_root removes the
-whole filesystem hierarchy of the initramfs, chroot()s to the real root device
-and calls /sbin/init with the specified arguments.
+Init (or systemd) kills all udev processes, cleans up the environment,
+sets up the arguments for the real init process and finally calls switch_root.
+switch_root removes the whole filesystem hierarchy of the initramfs,
+chroot()s to the real root device and calls /sbin/init with the specified arguments.
 
 To ensure all files in the initramfs hierarchy can be removed, all processes
 still running from the initramfs should not have any open file descriptors left.
 
-
-
 == Network Infrastructure
 
- 
 FIXME
 
-
 == Writing a Module
 
 A simple example module is _96insmodpost_, which modprobes a kernel module after
@@ -924,8 +908,6 @@ First we create a check() function, which just exits with 0 indicating that this
 module should be included by default.
 
 check():
-
-
 ----
 return 0
 ----
@@ -935,8 +917,6 @@ priority number 20 called _parse-insmodpost.sh_. It also installs the
 _insmodpost.sh_ script in _/sbin_.
 
 install():
-
-
 ----
 inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
 inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
@@ -947,8 +927,6 @@ rd.driver.post, blacklists the module from being autoloaded and installs the
 hook _insmodpost.sh_ in the _initqueue/settled_.
 
 _parse-insmodpost.sh_:
-
-
 ----
 for p in $(getargs rd.driver.post=); do
     echo "blacklist $p" >> /etc/modprobe.d/initramfsblacklist.conf
@@ -965,8 +943,6 @@ modprobe the kernel modules specified in all rd.driver.post kernel command line
 parameters. It runs after udev has settled and is only called once (--onetime).
 
 _insmodpost.sh_:
-
-
 ----
 . /lib/dracut-lib.sh
 
@@ -1008,7 +984,7 @@ depends on.
 
 === install()
 
-dracut_install
+inst_multiple
 
 inst
 
@@ -1028,13 +1004,11 @@ instmods
 
 === Creation Functions
 
- 
 FIXME
 
 
 === Initramfs Functions
 
- 
 FIXME
 
 
@@ -1042,6 +1016,9 @@ FIXME
 
 FIXME
 
+:leveloffset: 1
+[[dracutbootup7]]
+include::dracut.bootup.7.asc[]
 
 :leveloffset: 1
 [[dracut8]]

dracut.bootup.7.asc

@@ -0,0 +1,122 @@
+DRACUT.BOOTUP(7)
+================
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+dracut.bootup - boot ordering in the initramfs
+
+DESCRIPTION
+-----------
+
+This flow chart illustrates the ordering of the services, if systemd is used in the dracut initramfs.
+----
+
+                                    systemd-journal.socket
+                                               |
+                                               v
+                                    dracut-cmdline.service
+                                               |
+                                               v
+                                    dracut-pre-udev.service
+                                               |
+                                               v
+                                     systemd-udevd.service
+                                               |
+                                               v
+local-fs-pre.target                dracut-pre-trigger.service
+         |                                     |
+         v                                     v
+ (various mounts)  (various swap  systemd-udev-trigger.service
+         |           devices...)               |             (various low-level   (various low-level
+         |               |                     |             services: seed,       API VFS mounts:
+         v               v                     v             tmpfiles, random     mqueue, configfs,
+  local-fs.target   swap.target     dracut-initqueue.service    sysctl, ...)        debugfs, ...)
+         |               |                     |                    |                    |
+         \_______________|____________________ | ___________________|____________________/
+                                              \|/
+                                               v
+                                        sysinit.target
+                                               |
+                             _________________/|\___________________
+                            /                  |                    \
+                            |                  |                    |
+                            v                  |                    v
+                        (various               |              rescue.service
+                       sockets...)             |                    |
+                            |                  |                    v
+                            v                  |              rescue.target
+                     sockets.target            |
+                            |                  |
+                            \_________________ |                                 emergency.service
+                                              \|                                         |
+                                               v                                         v
+                                         basic.target                             emergency.target
+                                               |
+                        ______________________/|
+                       /                       |
+                       |                       v
+                       |            dracut-pre-mount.service
+                       |                       |
+                       |                       v
+                       |                  sysroot.mount
+                       |                       |
+                       |                       v
+                       |             initrd-root-fs.target
+           (custom initrd services)            |
+                       |                       v
+                       |             dracut-mount.service
+                       |                       |
+                       |                       v
+                       |            initrd-parse-etc.service
+                       |                       |
+                       |                       v
+                       |            (sysroot-usr.mount and
+                       |             various mounts marked
+                       |               with fstab option
+                       |                x-initrd.mount)
+                       |                       |
+                       |                       v
+                       |                initrd-fs.target
+                       \______________________ |
+                                              \|
+                                               v
+                                          initrd.target
+                                               |
+                                               v
+                                    dracut-pre-pivot.service
+                                               |
+                                               v
+                                     initrd-cleanup.service
+                                          isolates to
+                                    initrd-switch-root.target
+                                               |
+                                               v
+                        ______________________/|
+                       /                       |
+                       |        initrd-udevadm-cleanup-db.service
+                       |                       |
+           (custom initrd services)            |
+                       |                       |
+                       \______________________ |
+                                              \|
+                                               v
+                                   initrd-switch-root.target
+                                               |
+                                               v
+                                   initrd-switch-root.service
+                                               |
+                                               v
+                                          switch-root
+----
+
+
+AUTHOR
+------
+Harald Hoyer
+
+SEE ALSO
+--------
+*dracut*(8) *bootup*(7)

dracut.cmdline.7.asc

@@ -69,6 +69,12 @@ rootfstype=ext3
     force mounting _/_ and _/usr_ (if it is a separate device) read-write.
     See also ro option.
 
+**rootfallback=**_<path to blockdevice>_::
+    specify the block device to use as the root filesystem, if the normal root cannot be found.
+    This can only be a simple block device with a simple file system, for which the filesystem
+    driver is either compiled in, or added manually to the initramfs.
+    This parameter can be specified multiple times.
+
 **rd.auto** **rd.auto=1**::
     enable autoassembly of special devices like cryptoLUKS, dmraid, mdraid or lvm.
     Default is off as of dracut version >= 024.
@@ -124,10 +130,10 @@ Misc
 [[dracutkerneldebug]]
 Debug
 ~~~~~
-If you are dropped to an emergency shell, the file _/run/initramfs/sosreport.txt_ is created,
+If you are dropped to an emergency shell, the file _/run/initramfs/rdsosreport.txt_ is created,
 which can be safed to a (to be mounted by hand) partition (usually /boot) or a USB stick.
 Additional debugging info can be produced by adding **rd.debug** to the kernel command line.
-_/run/initramfs/sosreport.txt_ contains all logs and the output of some tools.
+_/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools.
 It should be attached to any report about dracut problems.
 
 **rd.info**::
@@ -144,8 +150,12 @@ It should be attached to any report about dracut problems.
     If "quiet" is set, it also logs to the console.
 
 **rd.memdebug=[0-3]**::
-    print memory usage debug info, set the verbose level from 1 to 3
-    print nothing when set rd.memdebug=0
+    Print memory usage info at various points, set the verbose level from 0 to 3
+    Higher level means more debugging output:
+    0 - no output
+    1 - partial /proc/meminfo
+    2 - /proc/meminfo
+    3 - /proc/meminfo + /proc/slabinfo
 
 **rd.break**::
     drop to a shell at the end
@@ -600,7 +610,7 @@ ZNET
 +
 ----
 rd.znet=qeth,0.0.0600,0.0.0601,0.0.0602,layer2=1,portname=foo
-rd.znet=ctc,0.0.0600,0.0.0601,0.0.0602,protocol=bar
+rd.znet=ctc,0.0.0600,0.0.0601,protocol=bar
 ----
 
 Plymouth Boot Splash

dracut.conf

@@ -1,11 +1,11 @@
 # PUT YOUR CONFIG HERE OR IN separate files named *.conf
 # in /etc/dracut.conf.d
-# /etc/dracut.conf.d/*.conf will override the settings in here
+# SEE man dracut.conf(5)
 
 # Sample dracut config file
 
-logfile=/var/log/dracut.log
-fileloglvl=6
+#logfile=/var/log/dracut.log
+#fileloglvl=6
 
 # Exact list of dracut modules to use.  Modules not listed here are not going
 # to be included.  If you only want to add some optional modules use
@@ -29,10 +29,10 @@ fileloglvl=6
 #
 
 # install local /etc/mdadm.conf
-mdadmconf="yes"
+#mdadmconf="no"
 
 # install local /etc/lvm/lvm.conf
-lvmconf="yes"
+#lvmconf="no"
 
 # A list of fsck tools to install. If it's not specified, module's hardcoded
 # default is used, currently: "umount mount /sbin/fsck* xfs_db xfs_check

dracut.conf.5.asc

@@ -10,17 +10,24 @@ dracut.conf - configuration file(s) for dracut
 
 SYNOPSIS
 --------
-_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_
+_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_  _/usr/lib/dracut/dracut.conf.d/*.conf_
 
 Description
 -----------
 _dracut.conf_ is loaded during the initialisation phase of dracut. Command line
-parameter will overwrite any values set here. _dracut.conf.d/*.conf_ files are
-read in alphanumerical order and will overwrite parameters set in
+parameter will overwrite any values set here.
+
+_*.conf_ files are read from /usr/lib/dracut/dracut.conf.d and /etc/dracut.conf.d.
+Files with the same name in /etc/dracut.conf.d will replace files in /usr/lib/dracut/dracut.conf.d.
+The files are then read in alphanumerical order and will overwrite parameters set in
 _/etc/dracut.conf_. Each line specifies an attribute and a value. A '#'
 indicates the beginning of a comment; following characters, up to the end of the
 line are not interpreted.
 
+dracut command line options will overwrite any values set here.
+
+Configuration files must have the extension .conf; other extensions are ignored.
+
 *dracutmodules+=*" __<dracut modules>__ "::
     Specify a space-separated list of dracut modules to call when building the
     initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
@@ -44,10 +51,6 @@ line are not interpreted.
     Specify a space-separated list of kernel modules not to add to the
     initramfs. The kernel modules have to be specified without the ".ko" suffix.
 
-*install_items+=*" __<kernel modules>__ "::
-    Specify a space-separated list of files, which are added to the initramfs
-    image.
-
 *filesystems+=*" __<filesystem names>__ "::
     Specify a space-separated list of kernel filesystem modules to exclusively
     include in the generic initramfs.
@@ -64,10 +67,18 @@ line are not interpreted.
 *do_strip=*"__{yes|no}__"::
     Strip binaries in the initramfs (default=yes)
 
+*do_prelink=*"__{yes|no}__"::
+    Prelink binaries in the initramfs (default=yes)
+
 *hostonly=*"__{yes|no}__"::
     Host-Only mode: Install only what is needed for booting the local host
     instead of a generic host and generate host-specific configuration.
 
+*persistent_policy=*"__<policy>__"::
+    Use _<policy>_ to address disks and partitions.
+    _<policy>_ can be any directory name found in /dev/disk.
+    E.g. "by-uuid", "by-label"
+
 *tmpdir=*"__<temporary directory>__"::
     Specify temporary directory to use.
 
@@ -102,7 +113,7 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *nofscks=*"__{yes|no}__"::
     If specified, inhibit installation of any fsck tools.
 
-*ro_mnt*
+*ro_mnt=*"__{yes|no}__"::
     Mount _/_ and _/usr_ read-only by default.
 
 *kernel_cmdline=*"__parameters__"::
@@ -114,6 +125,24 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *no_kernel=*"{yes|no}"::
     Do not install kernel drivers and firmware files (default=no)
 
+*acpi_override=*"{yes|no}"::
+    [WARNING] ONLY USE THIS IF YOU KNOW WHAT YOU ARE DOING! +
+    Override BIOS provided ACPI tables. For further documentation read
+    Documentation/acpi/initrd_table_override.txt in the kernel sources.
+    Search for ACPI table files (must have .aml suffix) in acpi_table_dir=
+    directory (see below) and add them to a separate uncompressed cpio
+    archive. This cpio archive gets glued (concatenated, uncompressed one
+    must be the first one) to the compressed cpio archive. The first,
+    uncompressed cpio archive is for data which the kernel must be able
+    to access very early (and cannot make use of uncompress alogrithms yet)
+    like microcode or ACPI tables (default=no).
+
+*acpi_table_dir=*"__<dir>__"::
+    Directory to search for ACPI tables if acpi_override= is set to yes.
+
+*early_microcode=*"{yes|no}"::
+    Combine early microcode with ramdisk (default=no)
+
 *stdloglvl*="__\{0-6\}__"::
     Set logging to standard error level.
 
@@ -127,13 +156,13 @@ If chrooted to another root other than the real root device, use --fstab and pro
     Path to log file.
 
 *show_modules=*"__{yes|no}__"::
-    Print included module's name to standard output during build.
+    Print the name of the included modules to standard output during build.
 
 Files
 -----
 _/etc/dracut.conf_::
     Old configuration file. You better use your own file in
-    _/etc/dracut/conf.d/_.
+    _/etc/dracut.conf.d/_.
 
 _/etc/dracut.conf.d/_::
     Any _/etc/dracut.conf.d/*.conf_ file can overwrite the values in

dracut.conf.d/fedora.conf.example

@@ -2,14 +2,13 @@
 
 # i18n
 i18n_vars="/etc/sysconfig/keyboard:KEYTABLE-KEYMAP /etc/sysconfig/i18n:SYSFONT-FONT,FONTACM-FONT_MAP,FONT_UNIMAP"
-omit_drivers+=" .*/fs/ocfs/.*  i2o_scsi"
+i18n_default_font="latarcyrheb-sun16"
 stdloglvl=3
+sysloglvl=5
 install_items+=" vi /etc/virc ps grep cat rm "
 prefix="/"
 systemdutildir=/usr/lib/systemd
 systemdsystemunitdir=/usr/lib/systemd/system
+systemdsystemconfdir=/etc/systemd/system
 udevdir=/usr/lib/udev
-add_dracutmodules+=" systemd "
-realinitpath="/usr/lib/systemd/systemd"
-kernel_cmdline+=" rd.auto=1 "
-
+hostonly="yes"

dracut.conf.d/gentoo.conf.example

@@ -10,5 +10,6 @@ ro_mnt=yes
 
 # i18n
 i18n_vars="/etc/conf.d/keymaps:keymap-KEYMAP,extended_keymaps-EXT_KEYMAPS /etc/conf.d/consolefont:consolefont-FONT,consoletranslation-FONT_MAP /etc/rc.conf:unicode-UNICODE"
+i18n_default_font="LatArCyrHeb-16"
 
 omit_drivers+=" i2o_scsi"

dracut.spec

@@ -21,8 +21,8 @@ Group: System/Base
 %endif
 
 # The entire source code is GPLv2+
-# except install/* which is LGPLv2.1+
-License: GPLv2+ and LGPLv2.1+
+# except install/* which is LGPLv2+
+License: GPLv2+ and LGPLv2+
 
 URL: https://dracut.wiki.kernel.org/
 
@@ -30,11 +30,17 @@ URL: https://dracut.wiki.kernel.org/
 # http://git.kernel.org/?p=boot/dracut/dracut.git;a=snapshot;h=%{version};sf=tgz
 Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.bz2
 
-BuildRequires: dash bash git
+BuildRequires: bash git
 
 %if 0%{?fedora} || 0%{?rhel}
 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+BuildRequires: pkgconfig
 %endif
+%if 0%{?fedora}
+BuildRequires: bash-completion
+BuildRequires: pkgconfig
+%endif
+
 %if 0%{?suse_version}
 BuildRoot: %{_tmppath}/%{name}-%{version}-build
 %endif
@@ -70,7 +76,11 @@ Provides: mkinitrd = 2.6.1
 Obsoletes: dracut-kernel < 005
 Provides:  dracut-kernel = %{version}-%{release}
 
-Requires: bash
+Obsoletes: dracut <= 029
+Obsoletes: dracut-norescue
+Provides:  dracut-norescue
+
+Requires: bash >= 4
 Requires: coreutils
 Requires: cpio
 Requires: filesystem >= 2.1.0
@@ -78,23 +88,24 @@ Requires: findutils
 Requires: grep
 Requires: hardlink
 Requires: gzip xz
-Requires: module-init-tools >= 3.7-9
+Requires: kmod
 Requires: sed
-Requires: file
 Requires: kpartx
-Requires: udev > 166
-Requires: kbd kbd-misc
+
 %if 0%{?fedora} || 0%{?rhel} > 6
 Requires: util-linux >= 2.21
-Conflicts: systemd < 187
+Requires: systemd >= 199
+Requires: procps-ng
+Conflicts: grubby < 8.23
+Conflicts: initscripts < 8.63-1
+Conflicts: plymouth < 0.8.0-0.2009.29.09.19.1
+Conflicts: bcache-tools < 0-0.14.20130909git
 %else
+Requires: udev > 166
 Requires: util-linux-ng >= 2.21
 %endif
 
-%if 0%{?fedora} || 0%{?rhel} > 6
-Conflicts: initscripts < 8.63-1
-Conflicts: plymouth < 0.8.0-0.2009.29.09.19.1
-%endif
+Conflicts: mdadm < 3.2.6-14
 
 %description
 dracut contains tools to create a bootable initramfs for 2.6 Linux kernels.
@@ -108,6 +119,7 @@ Summary: dracut modules to build a dracut initramfs with network support
 Requires: %{name} = %{version}-%{release}
 Requires: iputils
 Requires: iproute
+Requires: dhclient
 Obsoletes: dracut-generic < 008
 Provides:  dracut-generic = %{version}-%{release}
 
@@ -130,7 +142,7 @@ Requires: nss-softokn-freebl
 
 %description fips
 This package requires everything which is needed to build an
-all purpose initramfs with dracut, which does an integrity check.
+initramfs with dracut, which does an integrity check.
 %endif
 
 %package fips-aesni
@@ -139,8 +151,7 @@ Requires: %{name}-fips = %{version}-%{release}
 
 %description fips-aesni
 This package requires everything which is needed to build an
-all purpose initramfs with dracut, which does an integrity check
-and adds the aesni-intel kernel module.
+initramfs with dracut, which does an integrity check and adds the aesni-intel kernel module.
 
 %package caps
 Summary: dracut modules to build a dracut initramfs which drops capabilities
@@ -149,7 +160,26 @@ Requires: libcap
 
 %description caps
 This package requires everything which is needed to build an
-all purpose initramfs with dracut, which drops capabilities.
+initramfs with dracut, which drops capabilities.
+
+%package config-generic
+Summary: dracut configuration to turn off hostonly image generation
+Requires: %{name} = %{version}-%{release}
+Obsoletes: dracut-nohostonly
+Provides:  dracut-nohostonly
+
+%description config-generic
+This package provides the configuration to turn off the host specific initramfs
+generation with dracut and generates a generic image by default.
+
+%package config-rescue
+Summary: dracut configuration to turn on rescue image generation
+Requires: %{name} = %{version}-%{release}
+Obsoletes: dracut <= 029
+
+%description config-rescue
+This package provides the configuration to turn on the rescue initramfs
+generation with dracut.
 
 %package tools
 Summary: dracut tools to build the local initramfs
@@ -173,39 +203,41 @@ git am -p1 %{patches}
 %endif
 
 %build
-make all
+%configure --systemdsystemunitdir=%{_unitdir} --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) --libdir=%{_prefix}/lib
+
+make %{?_smp_mflags}
 
 %install
 %if 0%{?fedora} || 0%{?rhel}
-rm -rf $RPM_BUILD_ROOT
+rm -rf -- $RPM_BUILD_ROOT
 %endif
-make install DESTDIR=$RPM_BUILD_ROOT \
-     libdir=%{_prefix}/lib \
-     bindir=%{_bindir} \
-%if %{defined _unitdir}
-     systemdsystemunitdir=%{_unitdir} \
-%endif
-     sysconfdir=/etc mandir=%{_mandir}
+make %{?_smp_mflags} install \
+     DESTDIR=$RPM_BUILD_ROOT \
+     libdir=%{_prefix}/lib
 
 echo "DRACUT_VERSION=%{version}-%{release}" > $RPM_BUILD_ROOT/%{dracutlibdir}/dracut-version.sh
 
 %if 0%{?fedora} == 0 && 0%{?rhel} == 0 && 0%{?suse_version} == 0
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/01fips
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/02fips-aesni
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/01fips
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/02fips-aesni
+%endif
+
+%if %{defined _unitdir}
+# for systemd, better use systemd-bootchart
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00bootchart
 %endif
 
 # we do not support dash in the initramfs
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00dash
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00dash
 
 # remove gentoo specific modules
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/50gensplash
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/50gensplash
 
 %if %{defined _unitdir}
 # with systemd IMA and selinux modules do not make sense
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/96securityfs
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/97masterkey
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/98integrity
-rm -fr $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/98selinux
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/96securityfs
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/97masterkey
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/98integrity
 %endif
 
 mkdir -p $RPM_BUILD_ROOT/boot/dracut
@@ -215,28 +247,38 @@ touch $RPM_BUILD_ROOT%{_localstatedir}/log/dracut.log
 mkdir -p $RPM_BUILD_ROOT%{_sharedstatedir}/initramfs
 
 %if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
-install -m 0644 dracut.conf.d/fedora.conf.example $RPM_BUILD_ROOT/etc/dracut.conf.d/01-dist.conf
-install -m 0644 dracut.conf.d/fips.conf.example $RPM_BUILD_ROOT/etc/dracut.conf.d/40-fips.conf
+install -m 0644 dracut.conf.d/fedora.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
+install -m 0644 dracut.conf.d/fips.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/40-fips.conf
 %endif
 
 %if 0%{?suse_version}
-install -m 0644 dracut.conf.d/suse.conf.example   $RPM_BUILD_ROOT/etc/dracut.conf.d/01-dist.conf
+install -m 0644 dracut.conf.d/suse.conf.example   $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
 %endif
 
 %if 0%{?fedora} <= 12 && 0%{?rhel} < 6 && 0%{?suse_version} <= 9999
-rm $RPM_BUILD_ROOT%{_bindir}/mkinitrd
-rm $RPM_BUILD_ROOT%{_bindir}/lsinitrd
+rm -f -- $RPM_BUILD_ROOT%{_bindir}/mkinitrd
+rm -f -- $RPM_BUILD_ROOT%{_bindir}/lsinitrd
 %endif
 
-mkdir -p $RPM_BUILD_ROOT/etc/logrotate.d
-install -m 0644 dracut.logrotate $RPM_BUILD_ROOT/etc/logrotate.d/dracut_log
+%if 0%{?fedora} || 0%{?rhel} > 6
+# FIXME: remove after F19
+mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/kernel/postinst.d
+install -m 0755 51-dracut-rescue-postinst.sh $RPM_BUILD_ROOT%{_sysconfdir}/kernel/postinst.d/51-dracut-rescue-postinst.sh
+
+echo 'hostonly="no"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-generic-image.conf
+echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-rescue.conf
+%endif
+
+%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
+> $RPM_BUILD_ROOT/etc/system-fips
+%endif
 
 # create compat symlink
 mkdir -p $RPM_BUILD_ROOT/sbin
 ln -s /usr/bin/dracut $RPM_BUILD_ROOT/sbin/dracut
 
 %clean
-rm -rf $RPM_BUILD_ROOT
+rm -rf -- $RPM_BUILD_ROOT
 
 %files
 %defattr(-,root,root,0755)
@@ -244,6 +286,8 @@ rm -rf $RPM_BUILD_ROOT
 %{_bindir}/dracut
 # compat symlink
 /sbin/dracut
+%{_datadir}/bash-completion/completions/dracut
+%{_datadir}/bash-completion/completions/lsinitrd
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
 %{_bindir}/mkinitrd
 %{_bindir}/lsinitrd
@@ -256,11 +300,12 @@ rm -rf $RPM_BUILD_ROOT
 %{dracutlibdir}/dracut-logger.sh
 %{dracutlibdir}/dracut-initramfs-restore
 %{dracutlibdir}/dracut-install
-%config(noreplace) /etc/dracut.conf
+%config(noreplace) %{_sysconfdir}/dracut.conf
 %if 0%{?fedora} || 0%{?suse_version} || 0%{?rhel}
-%config /etc/dracut.conf.d/01-dist.conf
+%{dracutlibdir}/dracut.conf.d/01-dist.conf
 %endif
-%dir /etc/dracut.conf.d
+%dir %{_sysconfdir}/dracut.conf.d
+%dir %{dracutlibdir}/dracut.conf.d
 %{_mandir}/man8/dracut.8*
 %{_mandir}/man8/*service.8*
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
@@ -269,8 +314,16 @@ rm -rf $RPM_BUILD_ROOT
 %endif
 %{_mandir}/man7/dracut.kernel.7*
 %{_mandir}/man7/dracut.cmdline.7*
+%{_mandir}/man7/dracut.bootup.7*
 %{_mandir}/man5/dracut.conf.5*
+%if %{defined _unitdir}
+%{dracutlibdir}/modules.d/00systemd-bootchart
+%else
 %{dracutlibdir}/modules.d/00bootchart
+%endif
+%{dracutlibdir}/modules.d/00bash
+%{dracutlibdir}/modules.d/03modsign
+%{dracutlibdir}/modules.d/03rescue
 %{dracutlibdir}/modules.d/04watchdog
 %{dracutlibdir}/modules.d/05busybox
 %{dracutlibdir}/modules.d/10i18n
@@ -304,12 +357,12 @@ rm -rf $RPM_BUILD_ROOT
 %if %{undefined _unitdir}
 %{dracutlibdir}/modules.d/96securityfs
 %{dracutlibdir}/modules.d/97masterkey
-%{dracutlibdir}/modules.d/98selinux
 %{dracutlibdir}/modules.d/98integrity
 %endif
 %{dracutlibdir}/modules.d/97biosdevname
 %{dracutlibdir}/modules.d/98ecryptfs
 %{dracutlibdir}/modules.d/98pollcdrom
+%{dracutlibdir}/modules.d/98selinux
 %{dracutlibdir}/modules.d/98syslog
 %{dracutlibdir}/modules.d/98systemd
 %{dracutlibdir}/modules.d/98usrmount
@@ -317,12 +370,29 @@ rm -rf $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/99fs-lib
 %{dracutlibdir}/modules.d/99img-lib
 %{dracutlibdir}/modules.d/99shutdown
-%config(noreplace) /etc/logrotate.d/dracut_log
 %attr(0644,root,root) %ghost %config(missingok,noreplace) %{_localstatedir}/log/dracut.log
 %dir %{_sharedstatedir}/initramfs
 %if %{defined _unitdir}
 %{_unitdir}/dracut-shutdown.service
 %{_unitdir}/shutdown.target.wants/dracut-shutdown.service
+%{_unitdir}/dracut-cmdline.service
+%{_unitdir}/dracut-initqueue.service
+%{_unitdir}/dracut-mount.service
+%{_unitdir}/dracut-pre-mount.service
+%{_unitdir}/dracut-pre-pivot.service
+%{_unitdir}/dracut-pre-trigger.service
+%{_unitdir}/dracut-pre-udev.service
+%{_unitdir}/initrd.target.wants/dracut-cmdline.service
+%{_unitdir}/initrd.target.wants/dracut-initqueue.service
+%{_unitdir}/initrd.target.wants/dracut-mount.service
+%{_unitdir}/initrd.target.wants/dracut-pre-mount.service
+%{_unitdir}/initrd.target.wants/dracut-pre-pivot.service
+%{_unitdir}/initrd.target.wants/dracut-pre-trigger.service
+%{_unitdir}/initrd.target.wants/dracut-pre-udev.service
+
+%endif
+%if 0%{?fedora} || 0%{?rhel} > 6
+%{_prefix}/lib/kernel/install.d/50-dracut.install
 %endif
 
 %files network
@@ -343,7 +413,8 @@ rm -rf $RPM_BUILD_ROOT
 %files fips
 %defattr(-,root,root,0755)
 %{dracutlibdir}/modules.d/01fips
-%config(noreplace) /etc/dracut.conf.d/40-fips.conf
+%{dracutlibdir}/dracut.conf.d/40-fips.conf
+%config(missingok) /etc/system-fips
 %endif
 
 %files fips-aesni
@@ -363,4 +434,16 @@ rm -rf $RPM_BUILD_ROOT
 %dir /var/lib/dracut
 %dir /var/lib/dracut/overlay
 
+%files config-generic
+%defattr(-,root,root,0755)
+%{dracutlibdir}/dracut.conf.d/02-generic-image.conf
+
+%files config-rescue
+%defattr(-,root,root,0755)
+%{dracutlibdir}/dracut.conf.d/02-rescue.conf
+%if 0%{?fedora} || 0%{?rhel} > 6
+%{_prefix}/lib/kernel/install.d/51-dracut-rescue.install
+%{_sysconfdir}/kernel/postinst.d/51-dracut-rescue-postinst.sh
+%endif
+
 %changelog

git2spec.pl

@@ -1,21 +1,5 @@
 #!/usr/bin/perl
 
-sub last_tag {
-    open( GIT, 'git log  --pretty=format:%H |');
-  LINE: while( <GIT> ) {
-      open( GIT2, "git tag --contains $_ |");
-      while( <GIT2> ) {
-	  chomp;
-	  last LINE if /..*/;
-      }
-      close GIT2;
-  }
-    $tag=$_;
-    close GIT2;
-    close GIT;         # be done
-    return $tag;
-};
-
 sub create_patches {
     my $tag=shift;
     my $pdir=shift;
@@ -31,7 +15,8 @@ my $datestr = strftime "%Y%m%d", gmtime;
 
 my $tag=shift;
 my $pdir=shift;
-$tag=&last_tag if not defined $tag;
+$tag=`git describe --abbrev=0 --tags` if not defined $tag;
+chomp($tag);
 my @patches=&create_patches($tag, $pdir);
 my $num=$#patches + 2;
 $tag=~s/[^0-9]+?([0-9]+)/$1/;

install/dracut-install.c

@@ -62,6 +62,10 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
 static size_t dir_len(char const *file)
 {
         size_t length;
+
+        if(!file)
+                return 0;
+
         /* Strip the basename and any redundant slashes before it.  */
         for (length = strlen(file)-1; 0 < length; length--)
                 if (file[length] == '/' && file[length-1] != '/')
@@ -73,20 +77,23 @@ static char *convert_abs_rel(const char *from, const char *target)
 {
         /* we use the 4*MAXPATHLEN, which should not overrun */
         char relative_from[MAXPATHLEN * 4];
-        char *realtarget = NULL;
-        char *p, *q;
+        _cleanup_free_ char *realtarget = NULL;
+        _cleanup_free_ char *target_dir_p = NULL, *realpath_p = NULL;
         const char *realfrom = from;
-        int level = 0, fromlevel = 0, targetlevel = 0;
-        int l, i, rl;
-        int dirlen;
+        size_t level = 0, fromlevel = 0, targetlevel = 0;
+        int l;
+        size_t i, rl, dirlen;
+        int ret;
 
-        p = strdup(target);
-        dirlen = dir_len(p);
-        p[dirlen] = '\0';
-        q = realpath(p, NULL);
+        target_dir_p = strdup(target);
+        if (!target_dir_p)
+                return strdup(from);
 
-        if (q == NULL) {
-                free(p);
+        dirlen = dir_len(target_dir_p);
+        target_dir_p[dirlen] = '\0';
+        realpath_p = realpath(target_dir_p, NULL);
+
+        if (realpath_p == NULL) {
                 log_warning("convert_abs_rel(): target '%s' directory has no realpath.", target);
                 return strdup(from);
         }
@@ -95,11 +102,13 @@ static char *convert_abs_rel(const char *from, const char *target)
          * character - need to skip all leading /'s */
         rl = strlen(target);
         for (i = dirlen+1; i < rl; ++i)
-            if (p[i] != '/')
+            if (target_dir_p[i] != '/')
                 break;
-        asprintf(&realtarget, "%s/%s", q, &p[i]);
-        free(p);
-        free(q);
+        ret = asprintf(&realtarget, "%s/%s", realpath_p, &target_dir_p[i]);
+        if (ret < 0) {
+                log_error("Out of memory!");
+                exit(EXIT_FAILURE);
+        }
 
         /* now calculate the relative path from <from> to <target> and
            store it in <relative_from>
@@ -122,8 +131,6 @@ static char *convert_abs_rel(const char *from, const char *target)
                 if (realtarget[i] == '/')
                         level++;
 
-        free(realtarget);
-
         /* add "../" to the relative_from path, until the common pathname is
            reached */
         for (i = level; i < targetlevel; i++) {
@@ -155,18 +162,16 @@ static char *convert_abs_rel(const char *from, const char *target)
 static int ln_r(const char *src, const char *dst)
 {
         int ret;
-        const char *points_to = convert_abs_rel(src, dst);
+        _cleanup_free_ const char *points_to = convert_abs_rel(src, dst);
+
         log_info("ln -s '%s' '%s'", points_to, dst);
         ret = symlink(points_to, dst);
 
         if (ret != 0) {
                 log_error("ERROR: ln -s '%s' '%s': %m", points_to, dst);
-                free((char *)points_to);
                 return 1;
         }
 
-        free((char *)points_to);
-
         return 0;
 }
 
@@ -186,11 +191,11 @@ static bool use_clone = true;
 static int cp(const char *src, const char *dst)
 {
         int pid;
-        int ret;
+        int ret = 0;
 
         if (use_clone) {
                 struct stat sb;
-                int dest_desc, source_desc;
+                _cleanup_close_ int dest_desc = -1, source_desc = -1;
 
                 if (lstat(src, &sb) != 0)
                         goto normal_copy;
@@ -207,20 +212,24 @@ static int cp(const char *src, const char *dst)
                          (sb.st_mode) & (S_ISUID | S_ISGID | S_ISVTX | S_IRWXU | S_IRWXG | S_IRWXO));
 
                 if (dest_desc < 0) {
-                        close(source_desc);
                         goto normal_copy;
                 }
 
                 ret = clone_file(dest_desc, source_desc);
-                close(source_desc);
+
                 if (ret == 0) {
+                        struct timeval tv[2];
                         if (fchown(dest_desc, sb.st_uid, sb.st_gid) != 0)
-                                fchown(dest_desc, -1, sb.st_gid);
-                        close(dest_desc);
+                                fchown(dest_desc, (__uid_t)-1, sb.st_gid);
+                        tv[0].tv_sec = sb.st_atime;
+                        tv[0].tv_usec = 0;
+                        tv[1].tv_sec = sb.st_mtime;
+                        tv[1].tv_usec = 0;
+                        futimes(dest_desc, tv);
                         return ret;
                 }
                 close(dest_desc);
-
+                dest_desc = -1;
                 /* clone did not work, remove the file */
                 unlink(dst);
                 /* do not try clone again */
@@ -230,16 +239,83 @@ static int cp(const char *src, const char *dst)
  normal_copy:
         pid = fork();
         if (pid == 0) {
-                execlp("cp", "cp", "--reflink=auto", "--sparse=auto", "--preserve=mode", "-fL", src, dst, NULL);
+                execlp("cp", "cp", "--reflink=auto", "--sparse=auto", "--preserve=mode,timestamps", "-fL", src, dst, NULL);
                 _exit(EXIT_FAILURE);
         }
 
         while (waitpid(pid, &ret, 0) < 0) {
                 if (errno != EINTR) {
                         ret = -1;
+                        log_error("Failed: cp --reflink=auto --sparse=auto --preserve=mode,timestamps -fL %s %s", src, dst);
                         break;
                 }
         }
+        log_debug("cp ret = %d", ret);
+        return ret;
+}
+
+static int library_install(const char *src, const char *lib)
+{
+        _cleanup_free_ char *p = NULL;
+        _cleanup_free_ char *pdir = NULL, *ppdir = NULL, *clib = NULL;
+        char *q;
+        int r, ret = 0;
+
+        p = strdup(lib);
+
+        r = dracut_install(p, p, false, false, true);
+        if (r != 0)
+                log_error("ERROR: failed to install '%s' for '%s'", p, src);
+        else
+                log_debug("Lib install: '%s'", p);
+        ret += r;
+
+        /* also install lib.so for lib.so.* files */
+        q = strstr(p, ".so.");
+        if (q) {
+                q[3] = '\0';
+
+                /* ignore errors for base lib symlink */
+                if (dracut_install(p, p, false, false, true) == 0)
+                        log_debug("Lib install: '%s'", p);
+        }
+
+        /* Also try to install the same library from one directory above.
+           This fixes the case, where only the HWCAP lib would be installed
+           # ldconfig -p|fgrep libc.so
+           libc.so.6 (libc6,64bit, hwcap: 0x0000001000000000, OS ABI: Linux 2.6.32) => /lib64/power6/libc.so.6
+           libc.so.6 (libc6,64bit, hwcap: 0x0000000000000200, OS ABI: Linux 2.6.32) => /lib64/power6x/libc.so.6
+           libc.so.6 (libc6,64bit, OS ABI: Linux 2.6.32) => /lib64/libc.so.6
+        */
+
+        free(p);
+        p = strdup(lib);
+
+        pdir = dirname(p);
+        if (!pdir)
+                return ret;
+
+        pdir = strdup(pdir);
+        ppdir = dirname(pdir);
+        if (!ppdir)
+                return ret;
+
+        ppdir = strdup(ppdir);
+
+        strcpy(p, lib);
+
+        clib = strjoin(ppdir, "/", basename(p), NULL);
+        if (dracut_install(clib, clib, false, false, true) == 0)
+                log_debug("Lib install: '%s'", clib);
+        /* also install lib.so for lib.so.* files */
+        q = strstr(clib, ".so.");
+        if (q) {
+                q[3] = '\0';
+
+                /* ignore errors for base lib symlink */
+                if (dracut_install(clib, clib, false, false, true) == 0)
+                        log_debug("Lib install: '%s'", p);
+        }
 
         return ret;
 }
@@ -248,17 +324,19 @@ static int resolve_deps(const char *src)
 {
         int ret = 0;
 
-        char *buf = malloc(LINE_MAX);
+        _cleanup_free_ char *buf = malloc(LINE_MAX);
         size_t linesize = LINE_MAX;
-        FILE *fptr;
-        char *cmd;
+        _cleanup_pclose_ FILE *fptr = NULL;
+        _cleanup_free_ char *cmd = NULL;
 
         if (strstr(src, ".so") == 0) {
-                int fd;
+                _cleanup_close_ int fd = -1;
                 fd = open(src, O_RDONLY | O_CLOEXEC);
+                if (fd < 0)
+                        return -errno;
+
                 read(fd, buf, LINE_MAX);
                 buf[LINE_MAX - 1] = '\0';
-                close(fd);
                 if (buf[0] == '#' && buf[1] == '!') {
                         /* we have a shebang */
                         char *p, *q;
@@ -274,7 +352,14 @@ static int resolve_deps(const char *src)
         }
 
         /* run ldd */
-        asprintf(&cmd, "ldd %s 2>&1", src);
+        ret = asprintf(&cmd, "ldd %s 2>&1", src);
+        if (ret < 0) {
+                log_error("Out of memory!");
+                exit(EXIT_FAILURE);
+        }
+
+        ret = 0;
+
         fptr = popen(cmd, "r");
 
         while (!feof(fptr)) {
@@ -285,6 +370,12 @@ static int resolve_deps(const char *src)
 
                 log_debug("ldd: '%s'", buf);
 
+                if (strstr(buf, "you do not have execution permission")) {
+                        log_error("%s", buf);
+                        ret+=1;
+                        break;
+                }
+
                 if (strstr(buf, "not a dynamic executable"))
                         break;
 
@@ -294,31 +385,21 @@ static int resolve_deps(const char *src)
                 if (strstr(buf, "not regular file"))
                         break;
 
-                p = strstr(buf, "/");
+                if (strstr(buf, "cannot read header"))
+                        break;
+
+                if (strstr(buf, destrootdir))
+                        break;
+
+                p = strchr(buf, '/');
                 if (p) {
-                        int r;
                         for (q = p; *q && *q != ' ' && *q != '\n'; q++) ;
                         *q = '\0';
-                        r = dracut_install(p, p, false, false, true);
-                        if (r != 0)
-                                log_error("ERROR: failed to install '%s' for '%s'", p, src);
-                        else
-                                log_debug("Lib install: '%s'", p);
-                        ret += r;
 
-                        /* also install lib.so for lib.so.* files */
-                        q = strstr(p, ".so.");
-                        if (q) {
-                                q += 3;
-                                *q = '\0';
+                        ret += library_install(src, p);
 
-                                /* ignore errors for base lib symlink */
-                                if (dracut_install(p, p, false, false, true) == 0)
-                                        log_debug("Lib install: '%s'", p);
-                        }
                 }
         }
-        pclose(fptr);
 
         return ret;
 }
@@ -326,10 +407,15 @@ static int resolve_deps(const char *src)
 /* Install ".<filename>.hmac" file for FIPS self-checks */
 static int hmac_install(const char *src, const char *dst, const char *hmacpath)
 {
-        char *srcpath = strdup(src);
-        char *dstpath = strdup(dst);
-        char *srchmacname = NULL;
-        char *dsthmacname = NULL;
+        _cleanup_free_ char *srcpath = strdup(src);
+        _cleanup_free_ char *dstpath = strdup(dst);
+        _cleanup_free_ char *srchmacname = NULL;
+        _cleanup_free_ char *dsthmacname = NULL;
+        int ret;
+
+        if (!(srcpath && dstpath))
+                return -ENOMEM;
+
         size_t dlen = dir_len(src);
 
         if (endswith(src, ".hmac"))
@@ -338,35 +424,51 @@ static int hmac_install(const char *src, const char *dst, const char *hmacpath)
 	if (!hmacpath) {
                 hmac_install(src, dst, "/lib/fipscheck");
                 hmac_install(src, dst, "/lib64/fipscheck");
+                hmac_install(src, dst, "/lib/hmaccalc");
+                hmac_install(src, dst, "/lib64/hmaccalc");
         }
 
         srcpath[dlen] = '\0';
         dstpath[dir_len(dst)] = '\0';
         if (hmacpath) {
-                asprintf(&srchmacname, "%s/%s.hmac", hmacpath, &src[dlen + 1]);
-                asprintf(&dsthmacname, "%s/%s.hmac", hmacpath, &src[dlen + 1]);
+                ret = asprintf(&srchmacname, "%s/%s.hmac", hmacpath, &src[dlen + 1]);
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
+
+                ret = asprintf(&dsthmacname, "%s/%s.hmac", hmacpath, &src[dlen + 1]);
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
         } else {
-                asprintf(&srchmacname, "%s/.%s.hmac", srcpath, &src[dlen + 1]);
-                asprintf(&dsthmacname, "%s/.%s.hmac", dstpath, &src[dlen + 1]);
+                ret = asprintf(&srchmacname, "%s/.%s.hmac", srcpath, &src[dlen + 1]);
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
+
+                ret = asprintf(&dsthmacname, "%s/.%s.hmac", dstpath, &src[dlen + 1]);
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
         }
         log_debug("hmac cp '%s' '%s')", srchmacname, dsthmacname);
         dracut_install(srchmacname, dsthmacname, false, false, true);
-        free(dsthmacname);
-        free(srchmacname);
-        free(srcpath);
-        free(dstpath);
         return 0;
 }
 
 static int dracut_install(const char *src, const char *dst, bool isdir, bool resolvedeps, bool hashdst)
 {
         struct stat sb, db;
-        char *dname = NULL;
-        char *fulldstpath = NULL;
-        char *fulldstdir = NULL;
+        _cleanup_free_ char *fulldstpath = NULL;
+        _cleanup_free_ char *fulldstdir = NULL;
         int ret;
         bool src_exists = true;
-        char *i, *existing;
+        char *i = NULL;
+        char *existing;
 
         log_debug("dracut_install('%s', '%s')", src, dst);
 
@@ -399,9 +501,16 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
         }
 
         i = strdup(dst);
+        if (!i)
+                return -ENOMEM;
+
         hashmap_put(items, i, i);
 
-        asprintf(&fulldstpath, "%s%s", destrootdir, dst);
+        ret = asprintf(&fulldstpath, "%s%s", destrootdir, dst);
+        if (ret < 0) {
+                log_error("Out of memory!");
+                exit(EXIT_FAILURE);
+        }
 
         ret = stat(fulldstpath, &sb);
 
@@ -417,7 +526,6 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
                 } else
                         log_debug("'%s' already exists", fulldstpath);
 
-                free(fulldstpath);
                 /* dst does already exist */
                 return ret;
         }
@@ -429,6 +537,8 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
         ret = stat(fulldstdir, &db);
 
         if (ret < 0) {
+                _cleanup_free_ char *dname = NULL;
+
                 if (errno != ENOENT) {
                         log_error("ERROR: stat '%s': %m", fulldstdir);
                         return 1;
@@ -436,35 +546,34 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
                 /* create destination directory */
                 log_debug("dest dir '%s' does not exist", fulldstdir);
                 dname = strdup(dst);
+                if (!dname)
+                        return 1;
+
                 dname[dir_len(dname)] = '\0';
                 ret = dracut_install(dname, dname, true, false, true);
 
-                free(dname);
-
                 if (ret != 0) {
                         log_error("ERROR: failed to create directory '%s'", fulldstdir);
-                        free(fulldstdir);
                         return 1;
                 }
         }
 
-        free(fulldstdir);
-
         if (isdir && !src_exists) {
                 log_info("mkdir '%s'", fulldstpath);
-                return mkdir(fulldstpath, 0755);
+                ret = mkdir(fulldstpath, 0755);
+                return ret;
         }
 
         /* ready to install src */
 
         if (S_ISDIR(sb.st_mode)) {
                 log_info("mkdir '%s'", fulldstpath);
-                return mkdir(fulldstpath, sb.st_mode | S_IWUSR);
+                ret = mkdir(fulldstpath, sb.st_mode | S_IWUSR);
+                return ret;
         }
 
         if (S_ISLNK(sb.st_mode)) {
-                char *abspath;
-                char *absdestpath = NULL;
+                _cleanup_free_ char *abspath = NULL;
 
                 abspath = realpath(src, NULL);
 
@@ -482,15 +591,17 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
                 }
 
                 if (lstat(fulldstpath, &sb) != 0) {
+                        _cleanup_free_ char *absdestpath = NULL;
 
-                        asprintf(&absdestpath, "%s%s", destrootdir, abspath);
+                        ret = asprintf(&absdestpath, "%s%s", destrootdir, abspath);
+                        if (ret < 0) {
+                                log_error("Out of memory!");
+                                exit(EXIT_FAILURE);
+                        }
 
                         ln_r(absdestpath, fulldstpath);
-
-                        free(absdestpath);
                 }
 
-                free(abspath);
                 if (arg_hmac) {
                         /* copy .hmac files also */
                         hmac_install(src, dst, NULL);
@@ -508,8 +619,12 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
                 }
         }
 
+        log_debug("dracut_install ret = %d", ret);
         log_info("cp '%s' '%s'", src, fulldstpath);
         ret += cp(src, fulldstpath);
+
+        log_debug("dracut_install ret = %d", ret);
+
         return ret;
 }
 
@@ -520,49 +635,49 @@ static void item_free(char *i)
 }
 
 static void usage(int status)
-{
-        /*                                                                     */
-        printf("\
-Usage: %s -D DESTROOTDIR [OPTION]... -a SOURCE...\n\
-   or: %s -D DESTROOTDIR [OPTION]... SOURCE DEST\n\
-\n\
-Install SOURCE to DEST in DESTROOTDIR with all needed dependencies.\n\
-\n\
-  -D --destrootdir    Install all files to DESTROOTDIR as the root\n\
-  -a --all            Install all SOURCE arguments to DESTROOTDIR\n\
-  -o --optional       If SOURCE does not exist, do not fail\n\
-  -d --dir            SOURCE is a directory\n\
-  -l --ldd            Also install shebang executables and libraries\n\
-  -R --resolvelazy    Only install shebang executables and libraries for all SOURCE files\n\
-  -H --fips           Also install all '.SOURCE.hmac' files\n\
-  -v --verbose        Show more output\n\
-     --debug          Show debug output\n\
-     --version        Show package version\n\
-  -h --help           Show this help\n\
-\n\
-Example:\n\
-# mkdir -p /var/tmp/test-root\n\
-# %s -D /var/tmp/test-root --ldd -a sh tr\n\
-# tree /var/tmp/test-root\n\
-/var/tmp/test-root\n\
-|-- lib64 -> usr/lib64\n\
-`-- usr\n\
-    |-- bin\n\
-    |   |-- bash\n\
-    |   |-- sh -> bash\n\
-    |   `-- tr\n\
-    `-- lib64\n\
-        |-- ld-2.15.90.so\n\
-        |-- ld-linux-x86-64.so.2 -> ld-2.15.90.so\n\
-        |-- libc-2.15.90.so\n\
-        |-- libc.so\n\
-        |-- libc.so.6 -> libc-2.15.90.so\n\
-        |-- libdl-2.15.90.so\n\
-        |-- libdl.so -> libdl-2.15.90.so\n\
-        |-- libdl.so.2 -> libdl-2.15.90.so\n\
-        |-- libtinfo.so.5 -> libtinfo.so.5.9\n\
-        `-- libtinfo.so.5.9\n\
-", program_invocation_short_name, program_invocation_short_name, program_invocation_short_name);
+{        
+             /*                                                                     */
+        printf("Usage: %s -D DESTROOTDIR [OPTION]... -a SOURCE...\n"
+               "or: %s -D DESTROOTDIR [OPTION]... SOURCE DEST\n"
+               "\n"
+               "Install SOURCE to DEST in DESTROOTDIR with all needed dependencies.\n"
+               "\n"
+               "  -D --destrootdir    Install all files to DESTROOTDIR as the root\n"
+               "  -a --all            Install all SOURCE arguments to DESTROOTDIR\n"
+               "  -o --optional       If SOURCE does not exist, do not fail\n"
+               "  -d --dir            SOURCE is a directory\n"
+               "  -l --ldd            Also install shebang executables and libraries\n"
+               "  -R --resolvelazy    Only install shebang executables and libraries\n"
+               "                      for all SOURCE files\n"
+               "  -H --fips           Also install all '.SOURCE.hmac' files\n"
+               "  -v --verbose        Show more output\n"
+               "     --debug          Show debug output\n"
+               "     --version        Show package version\n"
+               "  -h --help           Show this help\n"
+               "\n"
+               "Example:\n"
+               "# mkdir -p /var/tmp/test-root\n"
+               "# %s -D /var/tmp/test-root --ldd -a sh tr\n"
+               "# tree /var/tmp/test-root\n"
+               "/var/tmp/test-root\n"
+               "|-- lib64 -> usr/lib64\n"
+               "`-- usr\n"
+               "    |-- bin\n"
+               "    |   |-- bash\n"
+               "    |   |-- sh -> bash\n"
+               "    |   `-- tr\n"
+               "    `-- lib64\n"
+               "        |-- ld-2.15.90.so\n"
+               "        |-- ld-linux-x86-64.so.2 -> ld-2.15.90.so\n"
+               "        |-- libc-2.15.90.so\n"
+               "        |-- libc.so\n"
+               "        |-- libc.so.6 -> libc-2.15.90.so\n"
+               "        |-- libdl-2.15.90.so\n"
+               "        |-- libdl.so -> libdl-2.15.90.so\n"
+               "        |-- libdl.so.2 -> libdl-2.15.90.so\n"
+               "        |-- libtinfo.so.5 -> libtinfo.so.5.9\n"
+               "        `-- libtinfo.so.5.9\n"
+               , program_invocation_short_name, program_invocation_short_name, program_invocation_short_name);
         exit(status);
 }
 
@@ -575,7 +690,7 @@ static int parse_argv(int argc, char *argv[])
                 ARG_DEBUG
         };
 
-        static const struct option const options[] = {
+        static struct option const options[] = {
                 {"help", no_argument, NULL, 'h'},
                 {"version", no_argument, NULL, ARG_VERSION},
                 {"dir", no_argument, NULL, 'd'},
@@ -590,7 +705,7 @@ static int parse_argv(int argc, char *argv[])
                 {NULL, 0, NULL, 0}
         };
 
-        while ((c = getopt_long(argc, argv, "adhloD:DHILR", options, NULL)) != -1) {
+        while ((c = getopt_long(argc, argv, "adhloD:HR", options, NULL)) != -1) {
                 switch (c) {
                 case ARG_VERSION:
                         puts(PROGRAM_VERSION_STRING);
@@ -641,7 +756,7 @@ static int parse_argv(int argc, char *argv[])
 static int resolve_lazy(int argc, char **argv)
 {
         int i;
-        int destrootdirlen = strlen(destrootdir);
+        size_t destrootdirlen = strlen(destrootdir);
         int ret = 0;
         char *item;
         for (i = 0; i < argc; i++) {
@@ -671,10 +786,12 @@ static int resolve_lazy(int argc, char **argv)
 
 static char *find_binary(const char *src)
 {
-        char *path;
+        _cleanup_free_ char *path = NULL;
         char *p, *q;
         bool end = false;
         char *newsrc = NULL;
+        int ret;
+
         path = getenv("PATH");
 
         if (path == NULL) {
@@ -683,6 +800,12 @@ static char *find_binary(const char *src)
         }
         path = strdup(path);
         p = path;
+
+        if (path == NULL) {
+                log_error("Out of memory!");
+                exit(EXIT_FAILURE);
+        }
+
         log_debug("PATH=%s", path);
 
         do {
@@ -695,7 +818,12 @@ static char *find_binary(const char *src)
                 else
                         *q = '\0';
 
-                asprintf(&newsrc, "%s/%s", p, src);
+                ret = asprintf(&newsrc, "%s/%s", p, src);
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
+
                 p = q + 1;
 
                 if (stat(newsrc, &sb) != 0) {
@@ -709,15 +837,15 @@ static char *find_binary(const char *src)
 
         } while (!end);
 
-        free(path);
         if (newsrc)
                 log_debug("find_binary(%s) == %s", src, newsrc);
+
         return newsrc;
 }
 
 static int install_one(const char *src, const char *dst)
 {
-        int r = 0;
+        int r = EXIT_SUCCESS;
         int ret;
 
         if (strchr(src, '/') == NULL) {
@@ -746,29 +874,27 @@ static int install_one(const char *src, const char *dst)
 
 static int install_all(int argc, char **argv)
 {
-        int r = 0;
+        int r = EXIT_SUCCESS;
         int i;
         for (i = 0; i < argc; i++) {
                 int ret;
                 log_debug("Handle '%s'", argv[i]);
 
                 if (strchr(argv[i], '/') == NULL) {
-                        char *newsrc = find_binary(argv[i]);
+                        _cleanup_free_ char *newsrc = find_binary(argv[i]);
                         if (newsrc) {
                                 log_debug("dracut_install '%s'", newsrc);
                                 ret = dracut_install(newsrc, newsrc, arg_createdir, arg_resolvedeps, true);
                                 if (ret == 0) {
                                         log_debug("dracut_install '%s' OK", newsrc);
                                 }
-                                free(newsrc);
                         } else {
                                 ret = -1;
                         }
 
                 } else {
-                        char *dest = strdup(argv[i]);
+                        _cleanup_free_ char *dest = strdup(argv[i]);
                         ret = dracut_install(argv[i], dest, arg_createdir, arg_resolvedeps, true);
-                        free(dest);
                 }
 
                 if ((ret != 0) && (!arg_optional)) {

install/macro.h

@@ -1,7 +1,6 @@
 /*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
 
-#ifndef foomacrohfoo
-#define foomacrohfoo
+#pragma once
 
 /***
   This file is part of systemd.
@@ -45,16 +44,38 @@
 #define _hidden_ __attribute__ ((visibility("hidden")))
 #define _weakref_(x) __attribute__((weakref(#x)))
 #define _introspect_(x) __attribute__((section("introspect." x)))
+#define _alignas_(x) __attribute__((aligned(__alignof(x))))
+#define _cleanup_(x) __attribute__((cleanup(x)))
+
+/* automake test harness */
+#define EXIT_TEST_SKIP 77
 
 #define XSTRINGIFY(x) #x
 #define STRINGIFY(x) XSTRINGIFY(x)
 
 /* Rounds up */
-#define ALIGN(l) ALIGN_TO((l), sizeof(void*))
+
+#define ALIGN4(l) (((l) + 3) & ~3)
+#define ALIGN8(l) (((l) + 7) & ~7)
+
+#if __SIZEOF_POINTER__ == 8
+#define ALIGN(l) ALIGN8(l)
+#elif __SIZEOF_POINTER__ == 4
+#define ALIGN(l) ALIGN4(l)
+#else
+#error "Wut? Pointers are neither 4 nor 8 bytes long?"
+#endif
+
+#define ALIGN_PTR(p) ((void*) ALIGN((unsigned long) p))
+#define ALIGN4_PTR(p) ((void*) ALIGN4((unsigned long) p))
+#define ALIGN8_PTR(p) ((void*) ALIGN8((unsigned long) p))
+
 static inline size_t ALIGN_TO(size_t l, size_t ali) {
         return ((l + ali - 1) & ~(ali - 1));
 }
 
+#define ALIGN_TO_PTR(p, ali) ((void*) ALIGN_TO((unsigned long) p))
+
 #define ELEMENTSOF(x) (sizeof(x)/sizeof((x)[0]))
 
 /*
@@ -64,34 +85,35 @@ static inline size_t ALIGN_TO(size_t l, size_t ali) {
  * @member: the name of the member within the struct.
  *
  */
-#define container_of(ptr, type, member) ({ \
-        const typeof( ((type *)0)->member ) *__mptr = (ptr); \
-        (type *)( (char *)__mptr - offsetof(type,member) );})
-
-#ifndef MAX
-#define MAX(a,b)                                \
-        __extension__ ({                        \
-                        typeof(a) _a = (a);     \
-                        typeof(b) _b = (b);     \
-                        _a > _b ? _a : _b;      \
+#define container_of(ptr, type, member)                                 \
+        __extension__ ({                                                \
+                        const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+                        (type *)( (char *)__mptr - offsetof(type,member) ); \
                 })
-#endif
 
-#define MAX3(a,b,c)                             \
-        MAX(MAX(a,b),c)
+#undef MAX
+#define MAX(a,b)                                 \
+        __extension__ ({                         \
+                        typeof(a) _a = (a);      \
+                        typeof(b) _b = (b);      \
+                        _a > _b ? _a : _b;       \
+                })
 
-#ifndef MIN
+#define MAX3(x,y,z)                              \
+        __extension__ ({                         \
+                        typeof(x) _c = MAX(x,y); \
+                        MAX(_c, z);              \
+                })
+
+#undef MIN
 #define MIN(a,b)                                \
         __extension__ ({                        \
                         typeof(a) _a = (a);     \
                         typeof(b) _b = (b);     \
                         _a < _b ? _a : _b;      \
                 })
-#endif
-
-#define MIN3(a,b,c)                             \
-        MIN(MIN(a,b),c)
 
+#ifndef CLAMP
 #define CLAMP(x, low, high)                                             \
         __extension__ ({                                                \
                         typeof(x) _x = (x);                             \
@@ -99,6 +121,7 @@ static inline size_t ALIGN_TO(size_t l, size_t ali) {
                         typeof(high) _high = (high);                    \
                         ((_x > _high) ? _high : ((_x < _low) ? _low : _x)); \
                 })
+#endif
 
 #define assert_se(expr)                                                 \
         do {                                                            \
@@ -119,14 +142,21 @@ static inline size_t ALIGN_TO(size_t l, size_t ali) {
                 log_assert_failed_unreachable(t, __FILE__, __LINE__, __PRETTY_FUNCTION__); \
         } while (false)
 
-#define assert_cc(expr)                            \
-        do {                                       \
-                switch (0) {                       \
-                        case 0:                    \
-                        case !!(expr):             \
-                                ;                  \
-                }                                  \
+#if defined(static_assert)
+#define assert_cc(expr)                         \
+        do {                                    \
+                static_assert(expr, #expr);     \
         } while (false)
+#else
+#define assert_cc(expr)                         \
+        do {                                    \
+                switch (0) {                    \
+                case 0:                         \
+                case !!(expr):                  \
+                        ;                       \
+                }                               \
+        } while (false)
+#endif
 
 #define PTR_TO_UINT(p) ((unsigned int) ((uintptr_t) (p)))
 #define UINT_TO_PTR(u) ((void*) ((uintptr_t) (u)))
@@ -149,6 +179,8 @@ static inline size_t ALIGN_TO(size_t l, size_t ali) {
 #define memzero(x,l) (memset((x), 0, (l)))
 #define zero(x) (memzero(&(x), sizeof(x)))
 
+#define CHAR_TO_STR(x) ((char[2]) { x, 0 })
+
 #define char_array_0(x) x[sizeof(x)-1] = 0;
 
 #define IOVEC_SET_STRING(i, s)                  \
@@ -187,6 +219,66 @@ static inline size_t IOVEC_INCREMENT(struct iovec *i, unsigned n, size_t k) {
         return k;
 }
 
-#include "log.h"
+#define VA_FORMAT_ADVANCE(format, ap)                                   \
+do {                                                                    \
+        int _argtypes[128];                                             \
+        size_t _i, _k;                                                  \
+        _k = parse_printf_format((format), ELEMENTSOF(_argtypes), _argtypes); \
+        assert(_k < ELEMENTSOF(_argtypes));                             \
+        for (_i = 0; _i < _k; _i++) {                                   \
+                if (_argtypes[_i] & PA_FLAG_PTR)  {                     \
+                        (void) va_arg(ap, void*);                       \
+                        continue;                                       \
+                }                                                       \
+                                                                        \
+                switch (_argtypes[_i]) {                                \
+                case PA_INT:                                            \
+                case PA_INT|PA_FLAG_SHORT:                              \
+                case PA_CHAR:                                           \
+                        (void) va_arg(ap, int);                         \
+                        break;                                          \
+                case PA_INT|PA_FLAG_LONG:                               \
+                        (void) va_arg(ap, long int);                    \
+                        break;                                          \
+                case PA_INT|PA_FLAG_LONG_LONG:                          \
+                        (void) va_arg(ap, long long int);               \
+                        break;                                          \
+                case PA_WCHAR:                                          \
+                        (void) va_arg(ap, wchar_t);                     \
+                        break;                                          \
+                case PA_WSTRING:                                        \
+                case PA_STRING:                                         \
+                case PA_POINTER:                                        \
+                        (void) va_arg(ap, void*);                       \
+                        break;                                          \
+                case PA_FLOAT:                                          \
+                case PA_DOUBLE:                                         \
+                        (void) va_arg(ap, double);                      \
+                        break;                                          \
+                case PA_DOUBLE|PA_FLAG_LONG_DOUBLE:                     \
+                        (void) va_arg(ap, long double);                 \
+                        break;                                          \
+                default:                                                \
+                        assert_not_reached("Unknown format string argument."); \
+                }                                                       \
+        }                                                               \
+} while(false)
 
-#endif
+ /* Because statfs.t_type can be int on some architecures, we have to cast
+  * the const magic to the type, otherwise the compiler warns about
+  * signed/unsigned comparison, because the magic can be 32 bit unsigned.
+ */
+#define F_TYPE_CMP(a, b) (a == (typeof(a)) b)
+
+
+/* Returns the number of chars needed to format variables of the
+ * specified type as a decimal string. Adds in extra space for a
+ * negative '-' prefix. */
+
+#define DECIMAL_STR_MAX(type)                                           \
+        (1+(sizeof(type) <= 1 ? 3 :                                     \
+            sizeof(type) <= 2 ? 5 :                                     \
+            sizeof(type) <= 4 ? 10 :                                    \
+            sizeof(type) <= 8 ? 20 : sizeof(int[-2*(sizeof(type) > 8)])))
+
+#include "log.h"

install/util.c

@@ -185,3 +185,95 @@ static const char *const log_level_table[] = {
 };
 
 DEFINE_STRING_TABLE_LOOKUP(log_level, int);
+
+char *strnappend(const char *s, const char *suffix, size_t b) {
+        size_t a;
+        char *r;
+
+        if (!s && !suffix)
+                return strdup("");
+
+        if (!s)
+                return strndup(suffix, b);
+
+        if (!suffix)
+                return strdup(s);
+
+        assert(s);
+        assert(suffix);
+
+        a = strlen(s);
+        if (b > ((size_t) -1) - a)
+                return NULL;
+
+        r = new(char, a+b+1);
+        if (!r)
+                return NULL;
+
+        memcpy(r, s, a);
+        memcpy(r+a, suffix, b);
+        r[a+b] = 0;
+
+        return r;
+}
+
+char *strappend(const char *s, const char *suffix) {
+        return strnappend(s, suffix, suffix ? strlen(suffix) : 0);
+}
+
+char *strjoin(const char *x, ...) {
+        va_list ap;
+        size_t l;
+        char *r, *p;
+
+        va_start(ap, x);
+
+        if (x) {
+                l = strlen(x);
+
+                for (;;) {
+                        const char *t;
+                        size_t n;
+
+                        t = va_arg(ap, const char *);
+                        if (!t)
+                                break;
+
+                        n = strlen(t);
+                        if (n > ((size_t) -1) - l) {
+                                va_end(ap);
+                                return NULL;
+                        }
+
+                        l += n;
+                }
+        } else
+                l = 0;
+
+        va_end(ap);
+
+        r = new(char, l+1);
+        if (!r)
+                return NULL;
+
+        if (x) {
+                p = stpcpy(r, x);
+
+                va_start(ap, x);
+
+                for (;;) {
+                        const char *t;
+
+                        t = va_arg(ap, const char *);
+                        if (!t)
+                                break;
+
+                        p = stpcpy(p, t);
+                }
+
+                va_end(ap);
+        } else
+                r[0] = 0;
+
+        return r;
+}

install/util.h

@@ -507,6 +507,42 @@ void* memdup(const void *p, size_t l);
 
 int is_kernel_thread(pid_t pid);
 
+static inline void freep(void *p) {
+        free(*(void**) p);
+}
+
+static inline void fclosep(FILE **f) {
+        if (*f)
+                fclose(*f);
+}
+
+static inline void pclosep(FILE **f) {
+        if (*f)
+                pclose(*f);
+}
+
+static inline void closep(int *fd) {
+        if (*fd >= 0)
+                close_nointr_nofail(*fd);
+}
+
+static inline void closedirp(DIR **d) {
+        if (*d)
+                closedir(*d);
+}
+
+static inline void umaskp(mode_t *u) {
+        umask(*u);
+}
+
+#define _cleanup_free_ _cleanup_(freep)
+#define _cleanup_fclose_ _cleanup_(fclosep)
+#define _cleanup_pclose_ _cleanup_(pclosep)
+#define _cleanup_close_ _cleanup_(closep)
+#define _cleanup_closedir_ _cleanup_(closedirp)
+#define _cleanup_umask_ _cleanup_(umaskp)
+#define _cleanup_globfree_ _cleanup_(globfree)
+
 int fd_inc_sndbuf(int fd, size_t n);
 int fd_inc_rcvbuf(int fd, size_t n);
 
@@ -524,4 +560,6 @@ bool in_initrd(void);
 
 void warn_melody(void);
 
+char *strjoin(const char *x, ...) _sentinel_;
+
 #endif

lsinitrd-bash-completion.sh

@@ -0,0 +1,63 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Copyright 2013 Red Hat, Inc.  All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+__contains_word () {
+        local word=$1; shift
+        for w in $*; do [[ $w = $word ]] && return 0; done
+        return 1
+}
+
+_lsinitrd() {
+        local field_vals= cur=${COMP_WORDS[COMP_CWORD]} prev=${COMP_WORDS[COMP_CWORD-1]}
+        local -A OPTS=(
+                [STANDALONE]='-s --size -h --help'
+
+                       [ARG]='-f --file -k --kver'
+        )
+
+        if __contains_word "$prev" ${OPTS[ARG]}; then
+                case $prev in
+                        --file|-f)
+                                comps=$(compgen -f -- "$cur")
+                                compopt -o filenames
+                        ;;
+                        --kver|-k)
+                                comps=$(cd /lib/modules; echo [0-9]*)
+                        ;;
+                        *)
+                                return 0
+                        ;;
+                esac
+                COMPREPLY=( $(compgen -W '$comps' -- "$cur") )
+                return 0
+        fi
+
+        if [[ $cur = -* ]]; then
+                COMPREPLY=( $(compgen -W '${OPTS[*]}' -- "$cur") )
+                return 0
+        fi
+
+        comps=$(compgen -f -- "$cur")
+        compopt -o filenames
+        COMPREPLY=( $(compgen -W '$comps' -- "$cur") )
+        return 0
+}
+
+complete -F _lsinitrd lsinitrd

lsinitrd.1.asc

@@ -10,12 +10,15 @@ lsinitrd - tool to show the contents of an initramfs image
 
 SYNOPSIS
 --------
-*lsinit* ['OPTION...'] [<image>]
+*lsinitrd* ['OPTION...'] [<image> [<filename> [<filename> [...] ]]]
+
+*lsinitrd* ['OPTION...'] -k <kernel-version>
 
 DESCRIPTION
 -----------
 lsinitrd shows the contents of an initramfs image. if <image> is omitted, then
-lsinitrd uses the default image /boot/initramfs-<kernel version>.img.
+lsinitrd uses the default image _/boot/<machine-id>/<kernel-version>/initrd_ or
+_/boot/initramfs-<kernel-version>.img_.
 
 OPTIONS
 -------
@@ -25,6 +28,12 @@ OPTIONS
 **-s, --size**::
     sort the contents of the initramfs by size.
 
+**-f, --file** _<filename>_::
+    print the contents of <filename>.
+
+**-k, --kver** _<kernel version>_::
+    inspect the initramfs of <kernel version>.
+
 AVAILABILITY
 ------------
 The lsinitrd command is part of the dracut package and is available from

lsinitrd.sh

@@ -21,55 +21,132 @@
 
 usage()
 {
-    echo "Usage: $(${0##*/}) [-s] [<initramfs file> [<filename>]]"
+    {
+        echo "Usage: ${0##*/} [options] [<initramfs file> [<filename> [<filename> [...] ]]]"
+        echo "Usage: ${0##*/} [options] -k <kernel version>"
+        echo
+        echo "-h, --help                  print a help message and exit."
+        echo "-s, --size                  sort the contents of the initramfs by size."
+        echo "-f, --file <filename>       print the contents of <filename>."
+        echo "-k, --kver <kernel version> inspect the initramfs of <kernel version>."
+        echo
+    } >&2
 }
 
-[[ $# -le 2 ]] || { usage ; exit 1 ; }
-
 sorted=0
-while getopts "s" opt; do
-    case $opt in
-        s)  sorted=1;;
-        h)  usage; exit 0;;
-        \?) usage; exit 1;;
+declare -A filenames
+
+unset POSIXLY_CORRECT
+TEMP=$(getopt \
+    -o "shf:k:" \
+    --long kver: \
+    --long file: \
+    --long help \
+    --long size \
+    -- "$@")
+
+if (( $? != 0 )); then
+    usage
+    exit 1
+fi
+
+eval set -- "$TEMP"
+
+while (($# > 0)); do
+    case $1 in
+        -k|--kver)  KERNEL_VERSION="$2"; shift;;
+        -f|--file)  filenames[${2#/}]=1; shift;;
+        -s|--size)  sorted=1;;
+        -h|--help)  usage; exit 0;;
+        --)         shift;break;;
+        *)          usage; exit 1;;
     esac
+    shift
 done
-shift $((OPTIND-1))
 
-image="${1:-/boot/initramfs-$(uname -r).img}"
-[[ -f "$image" ]]    || { echo "$image does not exist" ; exit 1 ; }
+[[ $KERNEL_VERSION ]] || KERNEL_VERSION="$(uname -r)"
 
-CAT=zcat
-FILE_T=$(file --dereference "$image")
-
-if echo "test"|xz|xz -dc --single-stream >/dev/null 2>&1; then
-    XZ_SINGLE_STREAM="--single-stream"
-fi
-
-if [[ "$FILE_T" =~ :\ gzip\ compressed\ data ]]; then
-    CAT=zcat
-elif [[ "$FILE_T" =~ :\ xz\ compressed\ data ]]; then
-    CAT="xzcat $XZ_SINGLE_STREAM"
-elif [[ "$FILE_T" =~ :\ XZ\ compressed\ data ]]; then
-    CAT="xzcat $XZ_SINGLE_STREAM"
-elif [[ "$FILE_T" =~ :\ LZMA ]]; then
-    CAT="xzcat $XZ_SINGLE_STREAM"
-elif [[ "$FILE_T" =~ :\ data ]]; then
-    CAT="xzcat $XZ_SINGLE_STREAM"
-fi
-
-if [[ $# -eq 2 ]]; then
-    $CAT $image | cpio --extract --verbose --quiet --to-stdout ${2#/} 2>/dev/null
-    exit $?
-fi
-
-echo "$image: $(du -h $image | while read a b; do echo $a;done)"
-echo "========================================================================"
-$CAT "$image" | cpio --extract --verbose --quiet --to-stdout '*lib/dracut/dracut-*' 2>/dev/null
-echo "========================================================================"
-if [ "$sorted" -eq 1 ]; then
-    $CAT "$image" | cpio --extract --verbose --quiet --list | sort -n -k5
+if [[ $1 ]]; then
+    image="$1"
+    if ! [[ -f "$image" ]]; then
+        {
+            echo "$image does not exist"
+            echo
+        } >&2
+        usage
+        exit 1
+    fi
 else
-    $CAT "$image" | cpio --extract --verbose --quiet --list | sort -k9
+    [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
+
+    if [[ -d /boot/loader/entries || -L /boot/loader/entries ]] \
+        && [[ $MACHINE_ID ]] \
+        && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
+        image="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
+    else
+        image="/boot/initramfs-${KERNEL_VERSION}.img"
+    fi
 fi
-echo "========================================================================"
+
+shift
+while (($# > 0)); do
+    filenames[${1#/}]=1;
+    shift
+done
+
+if ! [[ -f "$image" ]]; then
+    {
+        echo "No <initramfs file> specified and the default image '$image' cannot be accessed!"
+        echo
+    } >&2
+    usage
+    exit 1
+fi
+
+read -N 6 bin < "$image"
+case $bin in
+    $'\x1f\x8b'*)
+        CAT="zcat";;
+    BZh*)
+        CAT="bzcat";;
+    $'\x71\xc7'*|070701)
+        CAT="cat";;
+    *)
+        CAT="xzcat";
+        if echo "test"|xz|xzcat --single-stream >/dev/null 2>&1; then
+            CAT="xzcat --single-stream"
+        fi
+        ;;
+esac
+
+ret=0
+
+if (( ${#filenames[@]} > 0 )); then
+    (( ${#filenames[@]} == 1 )) && nofileinfo=1
+    for f in ${!filenames[@]}; do
+        [[ $nofileinfo ]] || echo "initramfs:/$f"
+        [[ $nofileinfo ]] || echo "========================================================================"
+        $CAT -- $image | cpio --extract --verbose --quiet --to-stdout $f 2>/dev/null
+        ((ret+=$?))
+        [[ $nofileinfo ]] || echo "========================================================================"
+        [[ $nofileinfo ]] || echo
+    done
+else
+    echo "Image: $image: $(du -h $image | while read a b; do echo $a;done)"
+    echo "========================================================================"
+    version=$($CAT -- "$image" | cpio --extract --verbose --quiet --to-stdout -- '*lib/dracut/dracut-*' 2>/dev/null)
+    ((ret+=$?))
+    echo "$version with dracut modules:"
+    $CAT -- "$image" | cpio --extract --verbose --quiet --to-stdout -- '*lib/dracut/modules.txt' 2>/dev/null
+    ((ret+=$?))
+    echo "========================================================================"
+    if [ "$sorted" -eq 1 ]; then
+        $CAT -- "$image" | cpio --extract --verbose --quiet --list | sort -n -k5
+    else
+        $CAT -- "$image" | cpio --extract --verbose --quiet --list | sort -k9
+    fi
+    ((ret+=$?))
+    echo "========================================================================"
+fi
+
+exit $ret

mkinitrd-dracut.sh

@@ -1,6 +1,11 @@
 #!/bin/bash --norc
 kver=$(uname -r)
 
+boot_dir="/boot"
+quiet=0
+host_only=0
+force=0
+
 error() { echo "$@" >&2; }
 
 usage () {
@@ -24,36 +29,105 @@ read_arg() {
     # $1 = arg name
     # $2 = arg value
     # $3 = arg parameter
-    local rematch='^[^=]*=(.*)$'
+    param="$1"
+    local rematch='^[^=]*=(.*)$' result
     if [[ $2 =~ $rematch ]]; then
-        read "$1" <<< "${BASH_REMATCH[1]}"
-    elif [[ $3 != -* ]]; then
-        # Only read next arg if it not an arg itself.
-        read "$1" <<< "$3"
-        # There is no way to shift our callers args, so
-        # return 1 to indicate they should do it instead.
-        return 1
+        read "$param" <<< "${BASH_REMATCH[1]}"
+    else
+	for ((i=3; $i <= $#; i++)); do
+            # Only read next arg if it not an arg itself.
+            if [[ ${@:$i:1} = -* ]];then
+		break
+            fi
+            result="$result ${@:$i:1}"
+            # There is no way to shift our callers args, so
+            # return "no of args" to indicate they should do it instead.
+	done
+	read "$1" <<< "$result"
+        return $(($i - 3))
     fi
 }
 
+# Taken over from SUSE mkinitrd
+default_kernel_images() {
+    local regex kernel_image kernel_version version_version initrd_image
+    local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
+
+    case "$(uname -m)" in
+        s390|s390x)
+            regex='image'
+            ;;
+        ppc|ppc64)
+            regex='vmlinux'
+            ;;
+        i386|x86_64)
+            regex='vmlinuz'
+            ;;
+        arm*)
+            regex='[uz]Image'
+            ;;
+        aarch64)
+            regex='Image'
+            ;;
+        *)  regex='vmlinu.'
+            ;;
+    esac
+
+    # user mode linux
+    if grep -q UML /proc/cpuinfo; then
+            regex='linux'
+    fi
+
+    kernel_images=""
+    initrd_images=""
+    for kernel_image in $(ls $boot_dir \
+            | sed -ne "\|^$regex\(-[0-9.]\+-[0-9]\+-[a-z0-9]\+$\)\?|p" \
+            | grep -v kdump$ ) ; do
+
+        # Note that we cannot check the RPM database here -- this
+        # script is itself called from within the binary kernel
+        # packages, and rpm does not allow recursive calls.
+
+        [ -L "$boot_dir/$kernel_image" ] && continue
+        [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
+        kernel_version=$(/usr/bin/get_kernel_version \
+                         $boot_dir/$kernel_image 2> /dev/null)
+        initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
+        if [ "$kernel_image" != "$initrd_image" -a \
+             -n "$kernel_version" -a \
+             -d "/lib/modules/$kernel_version" ]; then
+                kernel_images="$kernel_images $boot_dir/$kernel_image"
+                initrd_images="$initrd_images $boot_dir/$initrd_image"
+        fi
+    done
+    for kernel_image in $kernel_images;do
+	kernels="$kernels ${kernel_image#*-}"
+    done
+    for initrd_image in $initrd_images;do
+	targets="$targets $initrd_image"
+    done
+    host_only=1
+    force=1
+}
+
 while (($# > 0)); do
     case ${1%%=*} in
-        --with-usb) read_arg usbmodule "$@" || shift
+        --with-usb) read_arg usbmodule "$@" || shift $?
             basicmodules="$basicmodules ${usbmodule:-usb-storage}"
             unset usbmodule;;
-        --with-avail) read_arg modname "$@" || shift
+        --with-avail) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
-        --with) read_arg modname "$@" || shift
+        --with) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
         --version)
             echo "mkinitrd: dracut compatibility wrapper"
             exit 0;;
         -v|--verbose) dracut_args="${dracut_args} -v";;
-        -f|--force) dracut_args="${dracut_args} -f";;
-        --preload) read_arg modname "$@" || shift
+        -f|--force) force=1;;
+        --preload) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
         --image-version) img_vers=yes;;
-        --rootfs) read_arg rootfs "$@" || shift
+        --rootfs|-d) read_arg rootfs "$@" || shift $?
             dracut_args="${dracut_args} --filesystems $rootfs";;
         --nocompress) dracut_args="$dracut_args --no-compress";;
         --help) usage -n;;
@@ -80,10 +154,31 @@ while (($# > 0)); do
         --looppath*) ;;
         --dsdt*) ;;
         --bootchart) ;;
-        *) if [[ ! $target ]]; then
-            target=$1
-            elif [[ ! $kernel ]]; then
-            kernel=$1
+	-s) ;;
+	--quiet|-q) quiet=1;;
+	-b) read_arg boot_dir "$@" || shift $?
+	    if [ ! -d $boot_dir ];then
+		error "Boot directory $boot_dir does not exist"
+		exit 1
+	    fi
+	    ;;
+	-k) # Would be nice to get a list of images here
+	    read_arg kernel_images "$@" || shift $?
+	    for kernel_image in $kernel_images;do
+		kernels="$kernels ${kernel_image#*-}"
+	    done
+	    host_only=1
+	    force=1
+	    ;;
+	-i) read_arg initrd_images "$@" || shift $?
+	    for initrd_image in $initrd_images;do
+		targets="$targets $boot_dir/$initrd_image"
+	    done
+	    ;;
+        *)  if [[ ! $targets ]]; then
+            targets=$1
+            elif [[ ! $kernels ]]; then
+            kernels=$1
             else
             usage
             fi;;
@@ -91,11 +186,41 @@ while (($# > 0)); do
     shift
 done
 
-[[ $target && $kernel ]] || usage
-[[ $img_vers ]] && target="$target-$kernel"
+[[ $targets && $kernels ]] || default_kernel_images
+[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage)
 
-if [[ $basicmodules ]]; then
-        dracut $dracut_args --add-drivers "$basicmodules" "$target" "$kernel"
-else
-        dracut $dracut_args "$target" "$kernel"
-fi
+# We can have several targets/kernels, transform the list to an array
+targets=( $targets )
+[[ $kernels ]] && kernels=( $kernels )
+
+[[ $host_only == 1 ]] && dracut_args="${dracut_args} -H"
+[[ $force == 1 ]]     && dracut_args="${dracut_args} -f"
+
+echo "Creating: target|kernel|dracut args|basicmodules "
+for ((i=0 ; $i<${#targets[@]} ; i++)); do
+
+    if [[ $img_vers ]];then
+	target="${targets[$i]}-${kernels[$i]}"
+    else
+	target="${targets[$i]}"
+    fi
+    kernel="${kernels[$i]}"
+
+    # Duplicate code: No way found how to redirect output based on $quiet
+    if [[ $quiet == 1 ]];then
+	echo "$target|$kernel|$dracut_args|$basicmodules"
+	if [[ $basicmodules ]]; then
+            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel" &>/dev/null
+	else
+            dracut $dracut_args "$target" "$kernel" &>/dev/null
+	fi
+    else
+	if [[ $basicmodules ]]; then
+            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel"
+	else
+            dracut $dracut_args "$target" "$kernel"
+	fi
+    fi
+done

modules.d/00bash/module-setup.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+    [ -x /bin/bash ]
+}
+
+depends() {
+    return 0
+}
+
+install() {
+    # If another shell is already installed, do not use bash
+    [[ -x $initdir/bin/sh ]] && return
+
+    # Prefer bash as /bin/sh if it is available.
+    inst /bin/bash && ln -sf bash "${initdir}/bin/sh"
+}
+

modules.d/00bootchart/module-setup.sh

@@ -16,7 +16,7 @@ install() {
     inst_symlink /init /sbin/init
     inst_dir /lib/bootchart/tmpfs
 
-    dracut_install bootchartd bash \
+    inst_multiple bootchartd bash \
         /lib/bootchart/bootchart-collector /etc/bootchartd.conf \
         accton \
         echo \

modules.d/00systemd-bootchart/module-setup.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+    [[ "$mount_needs" ]] && return 1
+    [ -x $systemdutildir/systemd-bootchart ] || return 1
+    return 255
+}
+
+depends() {
+    return 0
+}
+
+install() {
+    inst_symlink /init /sbin/init
+    inst_multiple $systemdutildir/systemd-bootchart
+}

modules.d/01fips/fips-boot.sh

@@ -3,7 +3,7 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
-    rm -f /etc/modprobe.d/fips.conf >/dev/null 2>&1
+    rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
 elif getarg boot= >/dev/null; then
     . /sbin/fips.sh
     if mount_boot; then

modules.d/01fips/fips-noboot.sh

@@ -3,7 +3,7 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
-    rm -f /etc/modprobe.d/fips.conf >/dev/null 2>&1
+    rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
 elif ! [ -f /tmp/fipsdone ]; then
     . /sbin/fips.sh
     mount_boot

modules.d/01fips/fips.sh

@@ -15,6 +15,12 @@ mount_boot()
         UUID=*)
             boot="/dev/disk/by-uuid/${boot#UUID=}"
             ;;
+        PARTUUID=*)
+            boot="/dev/disk/by-partuuid/${boot#PARTUUID=}"
+            ;;
+        PARTLABEL=*)
+            boot="/dev/disk/by-partlabel/${boot#PARTLABEL=}"
+            ;;
         /dev/*)
             ;;
         *)
@@ -44,14 +50,34 @@ mount_boot()
         info "Mounting $boot as /boot"
         mount -oro "$boot" /boot || return 1
     elif [ -d "$NEWROOT/boot" ]; then
-        rm -fr /boot
+        rm -fr -- /boot
         ln -sf "$NEWROOT/boot" /boot
     fi
 }
 
+do_rhevh_check()
+{
+    KERNEL=$(uname -r)
+    kpath=${1}
+
+    # If we're on RHEV-H, the kernel is in /dev/.initramfs/live/vmlinuz0
+    HMAC_SUM_ORIG=$(cat /boot/.vmlinuz-${KERNEL}.hmac | while read a b; do printf "%s\n" $a; done)
+    HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b; do printf "%s\n" $a; done || return 1)
+    if [ -z "$HMAC_SUM_ORIG" ] || [ -z "$HMAC_SUM_CALC" ] || [ "${HMAC_SUM_ORIG}" != "${HMAC_SUM_CALC}" ]; then
+        warn "HMAC sum mismatch"
+        return 1
+    fi
+    info "rhevh_check OK"
+    return 0
+}
+
 do_fips()
 {
-    info "Checking integrity of kernel"
+    local _v
+    local _s
+    local _v
+    local _module
+
     KERNEL=$(uname -r)
 
     if ! [ -e "/boot/.vmlinuz-${KERNEL}.hmac" ]; then
@@ -59,19 +85,41 @@ do_fips()
         return 1
     fi
 
-    sha512hmac -c "/boot/.vmlinuz-${KERNEL}.hmac" || return 1
-
     FIPSMODULES=$(cat /etc/fipsmodules)
 
     info "Loading and integrity checking all crypto modules"
-    for module in $FIPSMODULES; do
-        if [ "$module" != "tcrypt" ]; then
-            modprobe ${module} || return 1
+    mv /etc/modprobe.d/fips.conf /etc/modprobe.d/fips.conf.bak
+    for _module in $FIPSMODULES; do
+        if [ "$_module" != "tcrypt" ]; then
+            if ! modprobe "${_module}"; then
+                # check if kernel provides generic algo
+                _found=0
+                while read _k _s _v; do
+                    [ "$_k" != "name" -a "$_k" != "driver" ] && continue
+                    [ "$_k" = "driver" ] && _v=$(str_replace "$_v" "_" "-")
+                    [ "$_v" != "$_module" ] && continue
+                    _found=1
+                    break
+                done </proc/crypto
+                [ "$_found" = "0" ] && return 1
+            fi
         fi
     done
+    mv /etc/modprobe.d/fips.conf.bak /etc/modprobe.d/fips.conf
+
     info "Self testing crypto algorithms"
     modprobe tcrypt || return 1
     rmmod tcrypt
+
+    info "Checking integrity of kernel"
+    if [ -e "$NEWROOT/dev/.initramfs/live/vmlinuz0" ]; then
+        do_rhevh_check "$NEWROOT/dev/.initramfs/live/vmlinuz0" || return 1
+    elif [ -e "$NEWROOT/dev/.initramfs/live/isolinux/vmlinuz0" ]; then
+        do_rhevh_check "$NEWROOT/dev/.initramfs/live/isolinux/vmlinuz0" || return 1
+    else
+        sha512hmac -c "/boot/.vmlinuz-${KERNEL}.hmac" || return 1
+    fi
+
     info "All initrd crypto checks done"
 
     > /tmp/fipsdone

modules.d/01fips/module-setup.sh

@@ -12,9 +12,11 @@ depends() {
 
 installkernel() {
     local _fipsmodules _mod
-    _fipsmodules="aead aes_generic xts aes-x86_64 ansi_cprng cbc ccm chainiv ctr gcm ghash_generic"
-    _fipsmodules+=" des deflate ecb eseqiv hmac seqiv sha256 sha256_generic sha512 sha512_generic"
-    _fipsmodules+=" cryptomgr crypto_null tcrypt dm-mod dm-crypt"
+    _fipsmodules="aead aes_generic aes-x86_64 ansi_cprng arc4 blowfish camellia cast6 cbc ccm "
+    _fipsmodules+="chainiv crc32c cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod "
+    _fipsmodules+="ecb eseqiv fcrypt gcm ghash_generic hmac khazad lzo md4 md5 michael_mic rmd128 "
+    _fipsmodules+="rmd160 rmd256 rmd320 rot13 salsa20 seed seqiv serpent sha1 sha224 sha256 sha256_generic "
+    _fipsmodules+="sha384 sha512 sha512_generic tcrypt tea tnepres twofish wp256 wp384 wp512 xeta xtea xts zlib"
 
     mkdir -m 0755 -p "${initdir}/etc/modprobe.d"
 
@@ -32,12 +34,12 @@ install() {
     inst_hook pre-pivot 01 "$moddir/fips-noboot.sh"
     inst_script "$moddir/fips.sh" /sbin/fips.sh
 
-    dracut_install sha512hmac rmmod insmod mount uname umount fipscheck
+    inst_multiple sha512hmac rmmod insmod mount uname umount fipscheck
 
     inst_libdir_file libsoftokn3.so libsoftokn3.so \
         libsoftokn3.chk libfreebl3.so libfreebl3.chk \
-        libssl.so 'hmaccalc/sha512hmac.hmac'
+        libssl.so 'hmaccalc/sha512hmac.hmac' libssl.so.10
 
-    dracut_install -o prelink
+    inst_multiple -o prelink
 }
 

modules.d/03modsign/load-modsign-keys.sh

@@ -0,0 +1,13 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Licensed under the GPLv2
+#
+# Copyright 2013 Red Hat, Inc.
+# Peter Jones <pjones@redhat.com>
+
+for x in /lib/modules/keys/* ; do
+    [ "${x}" = "/lib/modules/keys/*" ] && break
+    keyctl padd asymmetric "" @s < ${x}
+done

modules.d/03modsign/module-setup.sh

@@ -0,0 +1,37 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Licensed under the GPLv2
+#
+# Copyright 2013 Red Hat, Inc.
+# Peter Jones <pjones@redhat.com>
+
+check() {
+    [[ -x /usr/bin/keyctl ]] || return 1
+
+    # do not include module in hostonly mode,
+    # if no keys are present
+    if [[ $hostonly ]]; then
+        x=$(echo /lib/modules/keys/*)
+        [[ "${x}" = "/lib/modules/keys/*" ]] && return 255
+    fi
+
+    return 0
+}
+
+depends() {
+    return 0
+}
+
+install() {
+    inst_dir /lib/modules/keys
+    inst_binary /usr/bin/keyctl
+
+    inst_hook pre-trigger 01 "$moddir/load-modsign-keys.sh"
+
+    for x in /lib/modules/keys/* ; do
+        [[ "${x}" = "/lib/modules/keys/*" ]] && break
+        inst_simple "${x}"
+    done
+}

modules.d/03rescue/module-setup.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+    # do not add this module by default
+    return 255
+}
+
+depends() {
+    return 0
+}
+
+install() {
+    inst_multiple -o ps grep more cat rm strace free showmount \
+        ping netstat rpcinfo vi scp ping6 ssh \
+        fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
+}
+

modules.d/04watchdog/module-setup.sh

@@ -23,6 +23,6 @@ install() {
     inst_hook cleanup   00 "$moddir/watchdog.sh"
     inst_hook cleanup   99 "$moddir/watchdog.sh"
     inst_hook emergency 02 "$moddir/watchdog-stop.sh"
-    dracut_install -o wdctl
+    inst_multiple -o wdctl
 }
 

modules.d/10i18n/console_init.sh

@@ -4,8 +4,8 @@
 
 [ -n "$DRACUT_SYSTEMD" ] && exit 0
 
-if [ -x /lib/systemd/systemd-vconsole-setup ]; then
-    /lib/systemd/systemd-vconsole-setup "$@"
+if [ -x $systemdutildir/systemd-vconsole-setup ]; then
+    $systemdutildir/systemd-vconsole-setup "$@"
 fi
 
 [ -e /etc/vconsole.conf ] && . /etc/vconsole.conf

modules.d/10i18n/module-setup.sh

@@ -4,6 +4,11 @@
 
 check() {
     [[ "$mount_needs" ]] && return 1
+
+    for i in setfont loadkeys kbd_mode; do
+        type -P "$i" >/dev/null || return 1
+    done
+
     return 0
 }
 
@@ -12,9 +17,18 @@ depends() {
 }
 
 install() {
-    [ -x /lib/systemd/systemd-vconsole-setup ] && dracut_install /lib/systemd/systemd-vconsole-setup
+    if dracut_module_included "systemd"; then
+        [[ -f /etc/vconsole.conf ]] || return 0
+        unset FONT
+        unset KEYMAP
+        . /etc/vconsole.conf
+        # if vconsole.conf has no settings, do not include anything
+        [[ $FONT ]] || [[ $KEYMAP ]] || return 0
+    fi
+
+    inst_multiple -o $systemdutildir/systemd-vconsole-setup
     KBDSUBDIRS=consolefonts,consoletrans,keymaps,unimaps
-    DEFAULT_FONT=LatArCyrHeb-16
+    DEFAULT_FONT="${i18n_default_font:-LatArCyrHeb-16}"
     I18N_CONF="/etc/locale.conf"
     VCONFIG_CONF="/etc/vconsole.conf"
 
@@ -84,11 +98,13 @@ install() {
     }
 
     install_base() {
-        dracut_install setfont loadkeys kbd_mode stty
+        inst_multiple setfont loadkeys kbd_mode stty
 
-        inst ${moddir}/console_init.sh /lib/udev/console_init
-        inst_rules ${moddir}/10-console.rules
-        inst_hook cmdline 20 "${moddir}/parse-i18n.sh"
+        if ! dracut_module_included "systemd"; then
+            inst ${moddir}/console_init.sh /lib/udev/console_init
+            inst_rules ${moddir}/10-console.rules
+            inst_hook cmdline 20 "${moddir}/parse-i18n.sh"
+        fi
     }
 
     install_all_kbd() {
@@ -100,16 +116,16 @@ install() {
         done
 
         # remove unnecessary files
-        rm -f "${initdir}${kbddir}/consoletrans/utflist"
+        rm -f -- "${initdir}${kbddir}/consoletrans/utflist"
         find "${initdir}${kbddir}/" -name README\* -delete
         find "${initdir}${kbddir}/" -name '*.gz' -print -quit \
             | while read line; do
-            dracut_install gzip
+            inst_multiple gzip
             done
 
         find "${initdir}${kbddir}/" -name '*.bz2' -print -quit \
             | while read line; do
-            dracut_install bzip2
+            inst_multiple bzip2
             done
     }
 
@@ -210,12 +226,6 @@ install() {
             kbddir=''
         done
 
-        [[ ${kbddir} ]] || {
-            derror "Directories ${KBDSUBDIRS//,/, } not found.  Please" \
-                "inform us about the issue including your OS name and version."
-            return 1
-        }
-
         [[ -f $I18N_CONF && -f $VCONFIG_CONF ]] || \
             [[ ! ${hostonly} || ${i18n_vars} ]] || {
             derror 'i18n_vars not set!  Please set up i18n_vars in ' \

modules.d/10i18n/parse-i18n.sh

@@ -36,7 +36,7 @@ if [ -f /etc/locale.conf ]; then
 fi
 
 if [ -n "$DRACUT_SYSTEMD" ]; then
-    rm -f /etc/udev/rules.d/10-console.rules
-    rm -f /lib/udev/rules.d/10-console.rules
-    rm -f /lib/udev/console_init
+    rm -f -- /etc/udev/rules.d/10-console.rules
+    rm -f -- /lib/udev/rules.d/10-console.rules
+    rm -f -- /lib/udev/console_init
 fi

modules.d/30convertfs/convertfs.sh

@@ -56,22 +56,22 @@ if ! needconvert; then
 fi
 
 testfile="$ROOT/.usrmovecheck$$"
-rm -f "$testfile"
+rm -f -- "$testfile"
 > "$testfile"
 if [[ ! -e "$testfile" ]]; then
     echo "Cannot write to $ROOT/"
     exit 1
 fi
-rm -f "$testfile"
+rm -f -- "$testfile"
 
 testfile="$ROOT/usr/.usrmovecheck$$"
-rm -f "$testfile"
+rm -f -- "$testfile"
 > "$testfile"
 if [[ ! -e "$testfile" ]]; then
     echo "Cannot write to $ROOT/usr/"
     exit 1
 fi
-rm -f "$testfile"
+rm -f -- "$testfile"
 
 find_mount() {
     local dev mnt etc wanted_dev
@@ -108,11 +108,11 @@ cleanup() {
     for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64" \
 	"$ROOT/usr/bin" "$ROOT/usr/sbin" "$ROOT/usr/lib" \
         "$ROOT/usr/lib64"; do
-        [[ -d "${dir}.usrmove-new" ]] && rm -fr "${dir}.usrmove-new"
+        [[ -d "${dir}.usrmove-new" ]] && rm -fr -- "${dir}.usrmove-new"
         if [[ -d "${dir}.usrmove-old" ]]; then
             mv "$dir" "${dir}.del~"
             mv "${dir}.usrmove-old" "$dir"
-            rm -fr "${dir}.del~"
+            rm -fr -- "${dir}.del~"
         fi
     done
 }
@@ -126,7 +126,7 @@ set -e
 
 # merge / and /usr in new dir in /usr
 for dir in bin sbin lib lib64; do
-    rm -rf "$ROOT/usr/${dir}.usrmove-new"
+    rm -rf -- "$ROOT/usr/${dir}.usrmove-new"
     [[ -L "$ROOT/$dir" ]] && continue
     [[ -d "$ROOT/$dir" ]] || continue
     echo "Make a copy of \`$ROOT/usr/$dir'."
@@ -150,7 +150,7 @@ done
 for dir in bin sbin lib lib64; do
     [[ -d "$ROOT/usr/${dir}.usrmove-new" ]] || continue
     echo "Switch to new \`$ROOT/usr/$dir'."
-    rm -fr "$ROOT/usr/${dir}.usrmove-old"
+    rm -fr -- "$ROOT/usr/${dir}.usrmove-old"
     mv "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-old"
     mv "$ROOT/usr/${dir}.usrmove-new" "$ROOT/usr/$dir"
 done
@@ -160,7 +160,7 @@ for dir in bin sbin lib lib64; do
     [[ -L "$ROOT/$dir" ]] && continue
     [[ -d "$ROOT/$dir" ]] || continue
     echo "Create \`$ROOT/$dir' symlink."
-    rm -rf "$ROOT/${dir}.usrmove-old" || :
+    rm -fr -- "$ROOT/${dir}.usrmove-old" || :
     mv "$ROOT/$dir" "$ROOT/${dir}.usrmove-old"
     ln -sfn usr/$dir "$ROOT/$dir"
 done
@@ -178,9 +178,9 @@ done
 
 for dir in bin sbin lib lib64; do
     [[ -d "$ROOT/usr/${dir}.usrmove-old~" ]] \
-        && rm -rf "$ROOT/usr/${dir}.usrmove-old~" || :
+        && rm -rf -- "$ROOT/usr/${dir}.usrmove-old~" || :
     [[ -d "$ROOT/${dir}.usrmove-old~" ]] \
-        && rm -rf "$ROOT/${dir}.usrmove-old~" || :
+        && rm -rf -- "$ROOT/${dir}.usrmove-old~" || :
 done
 
 for dir in lib lib64; do

modules.d/30convertfs/module-setup.sh

@@ -12,7 +12,7 @@ depends() {
 }
 
 install() {
-    dracut_install bash find ldconfig mv rm cp ln
+    inst_multiple bash find ldconfig mv rm cp ln
     inst_hook pre-pivot 99 "$moddir/do-convertfs.sh"
     inst_script "$moddir/convertfs.sh" /usr/bin/convertfs
 }

modules.d/40network/dhclient-script.sh

@@ -9,7 +9,7 @@ setup_interface() {
     bcast=$new_broadcast_address
     gw=${new_routers%%,*}
     domain=$new_domain_name
-    search=$(printf "$new_domain_search")
+    search=$(printf -- "$new_domain_search")
     namesrv=$new_domain_name_servers
     hostname=$new_host_name
 
@@ -42,7 +42,7 @@ setup_interface() {
 
     # Note: hostname can be fqdn OR short hostname, so chop off any
     # trailing domain name and explicity add any domain if set.
-    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
+    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 }
 
 PATH=/usr/sbin:/usr/bin:/sbin:/bin
@@ -89,7 +89,7 @@ case $reason in
             [ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
             echo "> /tmp/setup_net_$netif.ok"
             echo "> /tmp/setup_net_\$(cat /sys/class/net/$netif/address).ok"
-            echo "rm -f $hookdir/initqueue/setup_net_$netif.sh"
+            echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
         } > $hookdir/initqueue/setup_net_$netif.sh
 
         echo "[ -f /tmp/setup_net_$netif.ok ]" > $hookdir/initqueue/finished/dhclient-$netif.sh

modules.d/40network/dhcp-root.sh

@@ -2,20 +2,24 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-# Don't continue if root is ok
-[ -n "$rootok" ] && return
-
 # This script is sourced, so root should be set. But let's be paranoid
 [ -z "$root" ] && root=$(getarg root=)
-[ -z "$netroot" ] && netroot=$(getarg netroot=)
 
-if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] ; then
+if [ -z "$netroot" ]; then
+    for netroot in $(getargs netroot=); do
+        [ "$netroot" = "dhcp" ] && break
+        [ "$netroot" = "dhcp6" ] && break
+    done
+    [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] || unset netroot
+fi
+
+if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ]; then
     # Tell ip= checker that we need dhcp
     NEEDDHCP="1"
 
     # Done, all good!
     rootok=1
-    if [ "$netroot" != "dhcp" ] ; then
+    if [ "$netroot" != "dhcp" ] && [ "$netroot" != "dhcp6" ]; then
         netroot=$root
     fi
 

modules.d/40network/ifup.sh

@@ -17,16 +17,22 @@ type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
 
 # $netif reads easier than $1
 netif=$1
+use_bridge='false'
+use_vlan='false'
 
 # enslave this interface to bond?
-if [ -e /tmp/bond.info ]; then
-    . /tmp/bond.info
+for i in /tmp/bond.*.info; do
+    [ -e "$i" ] || continue
+    unset bondslaves
+    unset bondname
+    . "$i"
     for slave in $bondslaves ; do
         if [ "$netif" = "$slave" ] ; then
             netif=$bondname
+            break 2
         fi
     done
-fi
+done
 
 if [ -e /tmp/team.info ]; then
     . /tmp/team.info
@@ -37,6 +43,20 @@ if [ -e /tmp/team.info ]; then
     done
 fi
 
+if [ -e /tmp/vlan.info ]; then
+    . /tmp/vlan.info
+    if [ "$netif" = "$phydevice" ]; then
+        if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then
+            : # We need to really setup bond (recursive call)
+        elif [ "$netif" = "$teammaster" ] && [ -n "$DO_TEAM_SETUP" ] ; then
+            : # We need to really setup team (recursive call)
+        else
+            netif="$vlanname"
+            use_vlan='true'
+        fi
+    fi
+fi
+
 # bridge this interface?
 if [ -e /tmp/bridge.info ]; then
     . /tmp/bridge.info
@@ -44,24 +64,18 @@ if [ -e /tmp/bridge.info ]; then
         if [ "$netif" = "$ethname" ]; then
             if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then
                 : # We need to really setup bond (recursive call)
+            elif [ "$netif" = "$teammaster" ] && [ -n "$DO_TEAM_SETUP" ] ; then
+                : # We need to really setup team (recursive call)
+            elif [ "$netif" = "$vlanname" ] && [ -n "$DO_VLAN_SETUP" ]; then
+                : # We need to really setup vlan (recursive call)
             else
                 netif="$bridgename"
+                use_bridge='true'
             fi
         fi
     done
 fi
 
-if [ -e /tmp/vlan.info ]; then
-    . /tmp/vlan.info
-    if [ "$netif" = "$phydevice" ]; then
-        if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then
-            : # We need to really setup bond (recursive call)
-        else
-            netif="$vlanname"
-        fi
-    fi
-fi
-
 # disable manual ifup while netroot is set for simplifying our logic
 # in netroot case we prefer netroot to bringup $netif automaticlly
 [ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2"
@@ -94,6 +108,7 @@ do_ipv6auto() {
     echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
     echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
     linkup $netif
+    wait_for_ipv6_auto $netif
 
     [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 
@@ -109,10 +124,10 @@ do_static() {
     [ -n "$mtu" ] && ip link set mtu $mtu dev $netif
     if strstr $ip '*:*:*'; then
         # note no ip addr flush for ipv6
-        ip addr add $ip/$mask dev $netif
+        ip addr add $ip/$mask ${srv:+peer $srv} dev $netif
     else
         ip addr flush dev $netif
-        ip addr add $ip/$mask brd + dev $netif
+        ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif
     fi
 
     [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
@@ -130,11 +145,12 @@ if [ "$netif" = "lo" ] ; then
 fi
 
 # start bond if needed
-if [ -e /tmp/bond.info ]; then
-    . /tmp/bond.info
+if [ -e /tmp/bond.${netif}.info ]; then
+    . /tmp/bond.${netif}.info
 
     if [ "$netif" = "$bondname" ] && [ ! -e /tmp/net.$bondname.up ] ; then # We are master bond device
         modprobe bonding
+        echo "+$netif" >  /sys/class/net/bonding_masters
         ip link set $netif down
 
         # Stolen from ifup-eth
@@ -208,6 +224,10 @@ if [ -e /tmp/bridge.info ]; then
         for ethname in $ethnames ; do
             if [ "$ethname" = "$bondname" ] ; then
                 DO_BOND_SETUP=yes ifup $bondname -m
+            elif [ "$ethname" = "$teammaster" ] ; then
+                DO_TEAM_SETUP=yes ifup $teammaster -m
+            elif [ "$ethname" = "$vlanname" ]; then
+                DO_VLAN_SETUP=yes ifup $vlanname -m
             else
                 linkup $ethname
             fi
@@ -219,10 +239,10 @@ fi
 get_vid() {
     case "$1" in
     vlan*)
-        return ${1#vlan}
+        echo ${1#vlan}
         ;;
     *.*)
-        return ${1##*.}
+        echo ${1##*.}
         ;;
     esac
 }
@@ -231,10 +251,13 @@ if [ "$netif" = "$vlanname" ] && [ ! -e /tmp/net.$vlanname.up ]; then
     modprobe 8021q
     if [ "$phydevice" = "$bondname" ] ; then
         DO_BOND_SETUP=yes ifup $phydevice -m
+    elif [ "$phydevice" = "$teammaster" ] ; then
+        DO_TEAM_SETUP=yes ifup $phydevice -m
     else
         linkup "$phydevice"
     fi
-    ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname; echo $?)"
+    ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname)"
+    ip link set "$vlanname" up
 fi
 
 # setup nameserver
@@ -256,6 +279,7 @@ if [ -z "$ip" ]; then
     fi
 fi
 
+
 # Specific configuration, spin through the kernel command line
 # looking for ip= lines
 for p in $(getargs ip=); do
@@ -263,8 +287,21 @@ for p in $(getargs ip=); do
     # skip ibft
     [ "$autoconf" = "ibft" ] && continue
 
+    case "$dev" in
+        ??:??:??:??:??:??)  # MAC address
+            _dev=$(iface_for_mac $dev)
+            [ -n "$_dev" ] && dev="$_dev"
+            ;;
+        ??-??-??-??-??-??)  # MAC address in BOOTIF form
+            _dev=$(iface_for_mac $(fix_bootif $dev))
+            [ -n "$_dev" ] && dev="$_dev"
+            ;;
+    esac
+
     # If this option isn't directed at our interface, skip it
-    [ -n "$dev" ] && [ "$dev" != "$netif" ] && continue
+    [ -n "$dev" ] && [ "$dev" != "$netif" ] && \
+    [ "$use_bridge" != 'true' ] && \
+    [ "$use_vlan" != 'true' ] && continue
 
     # Store config for later use
     for i in ip srv gw mask hostname macaddr; do
@@ -296,6 +333,19 @@ for p in $(getargs ip=); do
             ;;
     esac
 
-    break
+    exit 0
 done
+
+# netif isn't the top stack? Then we should exit here.
+# eg. netif is bond0. br0 is on top of it. dhcp br0 is correct but dhcp
+#     bond0 doesn't make sense.
+if [ -n "$DO_BOND_SETUP" -o -n "$DO_TEAM_SETUP" -o -n "$DO_VLAN_SETUP" ]; then
+    exit 0
+fi
+
+# no ip option directed at our interface?
+if [ ! -e /tmp/setup_net_${netif}.ok ]; then
+    do_dhcp -4
+fi
+
 exit 0

modules.d/40network/module-setup.sh

@@ -16,7 +16,6 @@ check() {
 }
 
 depends() {
-    [ -d /etc/sysconfig/network-scripts/ ] && echo ifcfg
     return 0
 }
 
@@ -70,10 +69,10 @@ installkernel() {
 
 install() {
     local _arch _i _dir
-    dracut_install ip arping dhclient sed
-    dracut_install -o ping ping6
-    dracut_install -o brctl
-    dracut_install -o teamd teamdctl teamnl
+    inst_multiple ip arping dhclient sed
+    inst_multiple -o ping ping6
+    inst_multiple -o brctl
+    inst_multiple -o teamd teamdctl teamnl
     inst_simple /etc/libnl/classid
     inst_script "$moddir/ifup.sh" "/sbin/ifup"
     inst_script "$moddir/netroot.sh" "/sbin/netroot"
@@ -83,6 +82,7 @@ install() {
     inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
     inst_hook pre-udev 60 "$moddir/net-genrules.sh"
     inst_hook cmdline 91 "$moddir/dhcp-root.sh"
+    inst_hook cmdline 92 "$moddir/parse-ibft.sh"
     inst_hook cmdline 95 "$moddir/parse-vlan.sh"
     inst_hook cmdline 96 "$moddir/parse-bond.sh"
     inst_hook cmdline 96 "$moddir/parse-team.sh"
@@ -95,5 +95,7 @@ install() {
 
     inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \
         {"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*"
+
+    dracut_need_initqueue
 }
 

modules.d/40network/net-genrules.sh

@@ -2,46 +2,45 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-# pxelinux provides macaddr '-' separated, but we need ':'
-fix_bootif() {
-    local macaddr=${1}
-    local IFS='-'
-    macaddr=$(for i in ${macaddr} ; do echo -n $i:; done)
-    macaddr=${macaddr%:}
-    # strip hardware type field from pxelinux
-    [ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:}
-    # return macaddr with lowercase alpha characters expected by udev
-    echo $macaddr | sed 'y/ABCDEF/abcdef/'
-}
+getargbool 0 rd.neednet && NEEDNET=1
 
 # Don't continue if we don't need network
-if [ -z "$netroot" ] && [ ! -e "/tmp/net.ifaces" ] && ! getargbool 0 rd.neednet >/dev/null; then
+if [ -z "$netroot" ] && [ ! -e "/tmp/net.ifaces" ] && [ "$NEEDNET" != "1" ]; then
     return
 fi
 
+command -v fix_bootif >/dev/null || . /lib/net-lib.sh
+
 # Write udev rules
 {
     # bridge: attempt only the defined interface
     if [ -e /tmp/bridge.info ]; then
         . /tmp/bridge.info
-        IFACES+=" ${ethnames%% *}"
+        IFACES="$IFACES ${ethnames%% *}"
+        MASTER_IFACES="$MASTER_IFACES $bridgename"
     fi
 
     # bond: attempt only the defined interface (override bridge defines)
-    if [ -e /tmp/bond.info ]; then
-        . /tmp/bond.info
+    for i in /tmp/bond.*.info; do
+        [ -e "$i" ] || continue
+        unset bondslaves
+        unset bondname
+        . "$i"
         # It is enough to fire up only one
-        IFACES+=" ${bondslaves%% *}"
-    fi
+        IFACES="$IFACES ${bondslaves%% *}"
+        MASTER_IFACES="$MASTER_IFACES ${bondname}"
+    done
 
     if [ -e /tmp/team.info ]; then
         . /tmp/team.info
-        IFACES+=" ${teamslaves}"
+        IFACES="$IFACES ${teamslaves}"
+        MASTER_IFACES="$MASTER_IFACES ${teammaster}"
     fi
 
     if [ -e /tmp/vlan.info ]; then
         . /tmp/vlan.info
-        IFACES+=" $phydevice"
+        IFACES="$IFACES $phydevice"
+        MASTER_IFACES="$MASTER_IFACES ${vlanname}"
     fi
 
     if [ -z "$IFACES" ]; then
@@ -55,27 +54,50 @@ fi
     ifup='/sbin/ifup $env{INTERFACE}'
     [ -z "$netroot" ] && ifup="$ifup -m"
 
-    # BOOTIF says everything, use only that one
-    BOOTIF=$(getarg 'BOOTIF=')
-    if [ -n "$BOOTIF" ] ; then
-        BOOTIF=$(fix_bootif "$BOOTIF")
-        printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="%s"\n' "$BOOTIF" "/sbin/initqueue --onetime $ifup"
-        echo "[ -f /tmp/setup_net_${BOOTIF}.ok ]" >$hookdir/initqueue/finished/wait-${BOOTIF}.sh
+    runcmd="RUN+=\"/sbin/initqueue --name ifup-\$env{INTERFACE} --unique --onetime $ifup\""
 
-    # If we have to handle multiple interfaces, handle only them.
-    elif [ -n "$IFACES" ] ; then
-        for iface in $IFACES ; do
-            printf 'SUBSYSTEM=="net", ENV{INTERFACE}=="%s", RUN+="%s"\n' "$iface" "/sbin/initqueue --onetime $ifup"
-            if [ "$bootdev" = "$iface" ]; then
+    # We have some specific interfaces to handle
+    if [ -n "$IFACES" ]; then
+        echo 'SUBSYSTEM!="net", GOTO="net_end"'
+        echo 'ACTION!="add|change|move", GOTO="net_end"'
+        for iface in $IFACES; do
+            case "$iface" in
+                ??:??:??:??:??:??)  # MAC address
+                    cond="ATTR{address}==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
+                ??-??-??-??-??-??)  # MAC address in BOOTIF form
+                    cond="ATTR{address}==\"$(fix_bootif $iface)\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
+                *)                  # an interface name
+                    cond="ENV{INTERFACE}==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    cond="NAME==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
+            esac
+            # The GOTO prevents us from trying to ifup the same device twice
+        done
+        echo 'LABEL="net_end"'
+
+        if [ -n "$MASTER_IFACES" ]; then
+            wait_ifaces=$MASTER_IFACES
+        else
+            wait_ifaces=$IFACES
+        fi
+
+        for iface in $wait_ifaces; do
+            if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then
                 echo "[ -f /tmp/setup_net_${iface}.ok ]" >$hookdir/initqueue/finished/wait-$iface.sh
             fi
         done
-
     # Default: We don't know the interface to use, handle all
     # Fixme: waiting for the interface as well.
     else
+        cond='ACTION=="add", SUBSYSTEM=="net"'
         # if you change the name of "91-default-net.rules", also change modules.d/80cms/cmssetup.sh
-        printf 'SUBSYSTEM=="net", RUN+="%s"\n' "/sbin/initqueue --onetime $ifup" > /etc/udev/rules.d/91-default-net.rules
+        echo "$cond, $runcmd" > /etc/udev/rules.d/91-default-net.rules
     fi
 
 # if you change the name of "90-net.rules", also change modules.d/80cms/cmssetup.sh

modules.d/40network/net-lib.sh

@@ -14,6 +14,11 @@ iface_for_remote_addr() {
     echo $5
 }
 
+iface_for_ip() {
+    set -- $(ip -o addr show to $1)
+    echo $2
+}
+
 iface_for_mac() {
     local interface="" mac="$(echo $1 | sed 'y/ABCDEF/abcdef/')"
     for interface in /sys/class/net/*; do
@@ -34,6 +39,45 @@ iface_has_link() {
     # XXX Do we need to reset the flags here? anaconda never bothered..
 }
 
+find_iface_with_link() {
+    local iface_path="" iface=""
+    for iface_path in /sys/class/net/*; do
+        iface=${iface_path##*/}
+        str_starts "$iface" "lo" && continue
+        if iface_has_link $iface; then
+            echo "$iface"
+            return 0
+        fi
+    done
+    return 1
+}
+
+# get the iface name for the given identifier - either a MAC, IP, or iface name
+iface_name() {
+    case $1 in
+        ??:??:??:??:??:??|??-??-??-??-??-??) iface_for_mac $1 ;;
+        *:*:*|*.*.*.*) iface_for_ip $1 ;;
+        *) echo $1 ;;
+    esac
+}
+
+# list the configured interfaces
+configured_ifaces() {
+    local IFACES="" iface_id="" rv=1
+    [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
+    if { pidof udevd || pidof systemd-udevd; } > /dev/null; then
+        for iface_id in $IFACES; do
+            echo $(iface_name $iface_id)
+            rv=0
+        done
+    else
+        warn "configured_ifaces called before udev is running"
+        echo $IFACES
+        [ -n "$IFACES" ] && rv=0
+    fi
+    return $rv
+}
+
 all_ifaces_up() {
     local iface="" IFACES=""
     [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
@@ -61,7 +105,7 @@ ifdown() {
     ip link set $netif down
     ip addr flush dev $netif
     echo "#empty" > /etc/resolv.conf
-    rm -f /tmp/net.$netif.did-setup
+    rm -f -- /tmp/net.$netif.did-setup
     # TODO: send "offline" uevent?
 }
 
@@ -128,41 +172,93 @@ save_netinfo() {
 }
 
 set_ifname() {
-    local name="$1" mac="$2" num=0 n=""
+    local name="$1" mac="$2" num=-1 n=""
     # if it's already set, return the existing name
     for n in $(getargs ifname=); do
         strstr "$n" "$mac" && echo ${n%%:*} && return
     done
     # otherwise, pick a new name and use that
-    while [ -e /sys/class/$name$num ]; do num=$(($num+1)); done
+    while :; do
+        num=$(($num+1));
+        [ -e /sys/class/net/$name$num ] && continue
+        for n in $(getargs ifname=); do
+            [ "$name$num" = "${n%%:*}" ] && continue 2
+        done
+        break
+    done
     echo "ifname=$name$num:$mac" >> /etc/cmdline.d/45-ifname.conf
     echo "$name$num"
 }
 
+# pxelinux provides macaddr '-' separated, but we need ':'
+fix_bootif() {
+    local macaddr=${1}
+    local IFS='-'
+    macaddr=$(for i in ${macaddr} ; do echo -n $i:; done)
+    macaddr=${macaddr%:}
+    # strip hardware type field from pxelinux
+    [ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:}
+    # return macaddr with lowercase alpha characters expected by udev
+    echo $macaddr | sed 'y/ABCDEF/abcdef/'
+}
+
 ibft_to_cmdline() {
-    local iface="" mac="" dev=""
-    local dhcp="" ip="" gw="" mask="" hostname=""
+    local iface=""
     modprobe -q iscsi_ibft
     (
         for iface in /sys/firmware/ibft/ethernet*; do
+            local mac="" dev=""
+            local dhcp="" ip="" gw="" mask="" hostname=""
+
             [ -e ${iface}/mac ] || continue
             mac=$(read a < ${iface}/mac; echo $a)
             [ -z "$mac" ] && continue
             dev=$(set_ifname ibft $mac)
-            dhcp=$(read a < ${iface}/dhcp; echo $a)
+
+            [ -e /tmp/net.${dev}.has_ibft_config ] && continue
+
+            [ -e ${iface}/dhcp ] && dhcp=$(read a < ${iface}/dhcp; echo $a)
+
             if [ -n "$dhcp" ]; then
                 echo "ip=$dev:dhcp"
+            elif [ -e ${iface}/ip-addr ]; then
+                [ -e ${iface}/ip-addr ] && ip=$(read a < ${iface}/ip-addr; echo $a)
+                # skip not assigned ip adresses
+                [ "$ip" = "0.0.0.0" ] && continue
+                [ -e ${iface}/gateway ] && gw=$(read a < ${iface}/gateway; echo $a)
+                [ -e ${iface}/subnet-mask ] && mask=$(read a < ${iface}/subnet-mask; echo $a)
+                [ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a)
+                if [ -n "$ip" ] && [ -n "$mask" ]; then
+                    echo "ip=$ip::$gw:$mask:$hostname:$dev:none"
+                else
+                    warn "${iface} does not contain a valid iBFT configuration"
+                    warn "ip-addr=$ip"
+                    warn "gateway=$gw"
+                    warn "subnet-mask=$mask"
+                    warn "hostname=$hostname"
+                fi
             else
-                ip=$(read a < ${iface}/ip-addr; echo $a)
-                gw=$(read a < ${iface}/gateway; echo $a)
-                mask=$(read a < ${iface}/subnet-mask; echo $a)
-                hostname=$(read a < ${iface}/hostname; echo $a)
-                echo "ip=$ip::$gw:$mask:$hostname:$dev:none"
+                info "${iface} does not contain a valid iBFT configuration"
+                ls -l ${iface} | vinfo
             fi
+
+            if [ -e ${iface}/vlan ]; then
+               vlan=$(read a < ${iface}/vlan; echo $a)
+               if [ "$vlan" -ne "0" ]; then
+                   case "$vlan" in
+                       [0-9]*)
+                           echo "vlan=$dev.$vlan:$dev"
+                           ;;
+                       *)
+                           echo "vlan=$vlan:$dev"
+                           ;;
+                   esac
+               fi
+            fi
+
+            echo $mac > /tmp/net.${dev}.has_ibft_config
         done
     ) >> /etc/cmdline.d/40-ibft.conf
-    # reread cmdline
-    unset CMDLINE
 }
 
 parse_iscsi_root()
@@ -271,17 +367,20 @@ ip_to_var() {
     case $# in
         0)  autoconf="error" ;;
         1)  autoconf=$1 ;;
-        2)  dev=$1; autoconf=$2 ;;
-        3)  dev=$1; autoconf=$2; mtu=$3 ;;
-        4)  dev=$1; autoconf=$2; mtu=$3; macaddr=$4 ;;
-        *)  ip=$1; srv=$2; gw=$3; mask=$4;
-            hostname=$5; dev=$6; autoconf=$7; mtu=$8;
+        2)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2 ;;
+        3)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2; [ -n "$3" ] && mtu=$3 ;;
+        4)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2; [ -n "$3" ] && mtu=$3; [ -n "$4" ] && macaddr=$4 ;;
+        *)  [ -n "$1" ] && ip=$1; [ -n "$2" ] && srv=$2; [ -n "$3" ] && gw=$3; [ -n "$4" ] && mask=$4;
+            [ -n "$5" ] && hostname=$5; [ -n "$6" ] && dev=$6; [ -n "$7" ] && autoconf=$7; [ -n "$8" ] && mtu=$8;
             if [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
                 macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
             fi
 	    ;;
     esac
-    # anaconda-style argument cluster
+
+    # ip=<ipv4-address> means anaconda-style static config argument cluster:
+    # ip=<ip> gateway=<gw> netmask=<nm> hostname=<host> mtu=<mtu>
+    # ksdevice={link|bootif|ibft|<MAC>|<ifname>}
     if strstr "$autoconf" "*.*.*.*"; then
         ip="$autoconf"
         gw=$(getarg gateway=)
@@ -290,9 +389,12 @@ ip_to_var() {
         dev=$(getarg ksdevice=)
         autoconf="none"
         mtu=$(getarg mtu=)
+
+        # handle special values for ksdevice
         case "$dev" in
-            # ignore fancy values for ksdevice=XXX
-            link|bootif|BOOTIF|ibft|*:*:*:*:*:*) dev="" ;;
+            bootif|BOOTIF) dev=$(fix_bootif $(getarg BOOTIF=)) ;;
+            link) dev="" ;; # FIXME: do something useful with this
+            ibft) dev="" ;; # ignore - ibft is handled elsewhere
         esac
     fi
 }
@@ -359,9 +461,25 @@ wait_for_route_ok() {
     return 1
 }
 
+wait_for_ipv6_auto() {
+    local cnt=0
+    local li
+    while [ $cnt -lt 400 ]; do
+        li=$(ip -6 addr show dev $1)
+        strstr "$li" "dynamic" && return 0
+        sleep 0.1
+        cnt=$(($cnt+1))
+    done
+    return 1
+}
+
 linkup() {
     wait_for_if_link $1 2>/dev/null\
      && ip link set $1 up 2>/dev/null\
      && wait_for_if_up $1 2>/dev/null
 }
 
+type hostname >/dev/null 2>&1 || \
+hostname() {
+	cat /proc/sys/kernel/hostname
+}

modules.d/40network/netroot.sh

@@ -20,13 +20,22 @@ command -v setup_net >/dev/null || . /lib/net-lib.sh
 netif=$1
 [ -e "/tmp/net.bootdev" ] && read netif < /tmp/net.bootdev
 
+case "$netif" in
+    ??:??:??:??:??:??)  # MAC address
+        for i in /sys/class/net/*/address; do
+            mac=$(cat $i)
+            if [ "$mac" = "$netif" ]; then
+                i=${i%/address}
+                netif=${i##*/}
+                break
+            fi
+        done
+esac
+
 # Figure out the handler for root=dhcp by recalling all netroot cmdline
 # handlers when this is not called from manually network bringing up.
 if [ -z "$2" ]; then
     if [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] ; then
-        # Unset root so we can check later
-        unset root
-
         # Load dhcp options
         [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
 
@@ -42,6 +51,7 @@ if [ -z "$2" ]; then
         netroot=$new_root_path
 
         # FIXME!
+        unset rootok
         for f in $hookdir/cmdline/90*.sh; do
             [ -f "$f" ] && . "$f";
         done
@@ -67,6 +77,7 @@ source_hook netroot $netif
 # Run the handler; don't store the root, it may change from device to device
 # XXX other variables to export?
 if $handler $netif $netroot $NEWROOT; then
+    rm -f -- $hookdir/initqueue/finished/dhcp.sh
     # Network rootfs mount successful - save interface info for ifcfg etc.
     save_netinfo $netif
 fi

modules.d/40network/parse-bond.sh

@@ -54,8 +54,8 @@ if getarg bond >/dev/null; then
     fi
     # Make it suitable for initscripts export
     bondoptions=$(str_replace "$bondoptions" ";" ",")
-    echo "bondname=$bondname" > /tmp/bond.info
-    echo "bondslaves=\"$bondslaves\"" >> /tmp/bond.info
-    echo "bondoptions=\"$bondoptions\"" >> /tmp/bond.info
+    echo "bondname=$bondname" > /tmp/bond.${bondname}.info
+    echo "bondslaves=\"$bondslaves\"" >> /tmp/bond.${bondname}.info
+    echo "bondoptions=\"$bondoptions\"" >> /tmp/bond.${bondname}.info
     return
 fi

modules.d/40network/parse-bridge.sh

@@ -37,12 +37,6 @@ parsebridge() {
 unset bridgename ethnames
 
 iface=eth0
-if [ -e /tmp/bond.info ]; then
-    . /tmp/bond.info
-    if [ -n "$bondname" ] ; then
-        iface=$bondname
-    fi
-fi
 
 # Parse bridge for bridgename and ethnames
 if bridge="$(getarg bridge)"; then

modules.d/40network/parse-ibft.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+command -v getarg >/dev/null          || . /lib/dracut-lib.sh
+command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
+
+# If ibft is requested, read ibft vals and write ip=XXX cmdline args
+[ "ibft" = "$(getarg ip=)" ] && ibft_to_cmdline
+

modules.d/40network/parse-ip-opts.sh

@@ -15,16 +15,8 @@
 #
 
 command -v getarg >/dev/null          || . /lib/dracut-lib.sh
-command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
 
-# Don't mix BOOTIF=macaddr from pxelinux and ip= lines
-getarg ip= >/dev/null && getarg BOOTIF= >/dev/null && \
-    die "Mixing BOOTIF and ip= lines is dangerous"
-
-# No more parsing stuff, BOOTIF says everything
-[ -n "$(getarg BOOTIF)" ] && return
-
-if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] ; then
+if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] && [ -z "$(getarg BOOTIF=)" ]; then
     # No ip= argument(s) for netroot provided, defaulting to DHCP
     return;
 fi
@@ -46,14 +38,17 @@ if [ -n "$NEEDBOOTDEV" ] ; then
     [ -z "$BOOTDEV" ] && warn "Please supply bootdev argument for multiple ip= lines"
 fi
 
-# If ibft is requested, read ibft vals and write ip=XXX cmdline args
-[ "ibft" = "$(getarg ip=)" ] && ibft_to_cmdline
-
 # Check ip= lines
 # XXX Would be nice if we could errorcheck ip addresses here as well
 for p in $(getargs ip=); do
     ip_to_var $p
 
+    # make first device specified the BOOTDEV
+    if [ -z "$BOOTDEV" ] && [ -n "$dev" ]; then
+        BOOTDEV="$dev"
+        [ -n "$NEEDBOOTDEV" ] && warn "Setting bootdev to '$BOOTDEV'"
+    fi
+
     # skip ibft since we did it above
     [ "$autoconf" = "ibft" ] && continue
 
@@ -112,6 +107,12 @@ for p in $(getargs ip=); do
 
 done
 
+# put BOOTIF in IFACES to make sure it comes up
+if BOOTIF="$(getarg BOOTIF=)"; then
+    BOOTDEV=$(fix_bootif $BOOTIF)
+    IFACES="$BOOTDEV $IFACES"
+fi
+
 # This ensures that BOOTDEV is always first in IFACES
 if [ -n "$BOOTDEV" ] && [ -n "$IFACES" ] ; then
     IFACES="${IFACES%$BOOTDEV*} ${IFACES#*$BOOTDEV}"
@@ -121,6 +122,3 @@ fi
 # Store BOOTDEV and IFACES for later use
 [ -n "$BOOTDEV" ] && echo $BOOTDEV > /tmp/net.bootdev
 [ -n "$IFACES" ]  && echo $IFACES > /tmp/net.ifaces
-
-# We need a ip= line for the configured bootdev=
-[ -n "$NEEDBOOTDEV" ] && [ -z "$BOOTDEVOK" ] && die "Bootdev Argument '$BOOTDEV' not found"

modules.d/45ifcfg/module-setup.sh

@@ -3,6 +3,7 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 check() {
+    [[ -d /etc/sysconfig/network-scripts ]] && return 0
     return 255
 }
 

modules.d/45ifcfg/write-ifcfg.sh

@@ -4,19 +4,15 @@
 
 # NFS root might have reached here before /tmp/net.ifaces was written
 udevadm settle --timeout=30
-# Don't write anything if we don't know our bootdev
-[ -f /tmp/net.ifaces ] || return 1
-
-read IFACES < /tmp/net.ifaces
-
-if [ -e /tmp/bond.info ]; then
-    . /tmp/bond.info
-fi
 
 if [ -e /tmp/bridge.info ]; then
     . /tmp/bridge.info
 fi
 
+if [ -e /tmp/vlan.info ]; then
+    . /tmp/vlan.info
+fi
+
 mkdir -m 0755 -p /tmp/ifcfg/
 mkdir -m 0755 -p /tmp/ifcfg-leases/
 
@@ -83,12 +79,27 @@ print_s390() {
     echo "OPTIONS=\"${OPTIONS}\""
 }
 
+for netup in /tmp/net.*.did-setup ; do
+    [ -f $netup ] || continue
 
-for netif in $IFACES ; do
+    netif=${netup%%.did-setup}
+    netif=${netif##*/net.}
     [ -e /tmp/ifcfg/ifcfg-$netif ] && continue
-    # bridge?
     unset bridge
     unset bond
+    unset bondslaves
+    unset bondname
+    unset bondoptions
+    unset uuid
+    unset ip
+    unset gw
+    unset mtu
+    unset mask
+    unset macaddr
+    unset slave
+    unset ethname
+    [ -e /tmp/bond.${netif}.info ] && . /tmp/bond.${netif}.info
+
     uuid=$(cat /proc/sys/kernel/random/uuid)
     if [ "$netif" = "$bridgename" ]; then
         bridge=yes
@@ -96,57 +107,76 @@ for netif in $IFACES ; do
     # $netif can't be bridge and bond at the same time
         bond=yes
     fi
+    if [ "$netif" = "$vlanname" ]; then
+        vlan=yes
+    fi
     cat /sys/class/net/$netif/address > /tmp/net.$netif.hwaddr
     {
         echo "# Generated by dracut initrd"
-        echo "DEVICE=$netif"
+        echo "DEVICE=\"$netif\""
         echo "ONBOOT=yes"
         echo "NETBOOT=yes"
-        echo "UUID=$uuid"
-        [ -n "$mtu" ] && echo "MTU=$mtu"
-        if [ -f /tmp/net.$netif.lease ]; then
-            strstr "$ip" '*:*:*' &&
-            echo "IPV6INIT=yes"
-            echo "DHCPV6C=yes"
-            echo "BOOTPROTO=dhcp"
-            cp /tmp/net.$netif.lease /tmp/ifcfg-leases/dhclient-$uuid-$netif.lease
+        echo "UUID=\"$uuid\""
+        if [ -f /tmp/dhclient.$netif.lease ]; then
+            [ -f /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
+            strstr "$ip" '*:*:*' && echo "IPV6INIT=yes"
+            if [ -f /tmp/net.$netif.has_ibft_config ]; then
+                echo "BOOTPROTO=ibft"
+            else
+                echo "BOOTPROTO=dhcp"
+            fi
+            cp /tmp/dhclient.$netif.lease /tmp/ifcfg-leases/dhclient-$uuid-$netif.lease
         else
             # If we've booted with static ip= lines, the override file is there
             [ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override
             if strstr "$ip" '*:*:*'; then
                 echo "IPV6INIT=yes"
                 echo "IPV6_AUTOCONF=no"
-                echo "IPV6ADDR=$ip/$mask"
+                echo "IPV6ADDR=\"$ip/$mask\""
             else
-                echo "BOOTPROTO=none"
-                echo "IPADDR=$ip"
-                if strstr "$mask" "."; then
-                    echo "NETMASK=$mask"
+                if [ -f /tmp/net.$netif.has_ibft_config ]; then
+                    echo "BOOTPROTO=ibft"
                 else
-                    echo "PREFIX=$mask"
+                    echo "BOOTPROTO=none"
+                    echo "IPADDR=\"$ip\""
+                    if strstr "$mask" "."; then
+                        echo "NETMASK=\"$mask\""
+                    else
+                        echo "PREFIX=\"$mask\""
+                    fi
                 fi
             fi
             if strstr "$gw" '*:*:*'; then
-                echo "IPV6_DEFAULTGW=$gw"
+                echo "IPV6_DEFAULTGW=\"$gw\""
             elif [ -n "$gw" ]; then
-                echo "GATEWAY=$gw"
+                echo "GATEWAY=\"$gw\""
             fi
         fi
+        [ -n "$mtu" ] && echo "MTU=\"$mtu\""
     } > /tmp/ifcfg/ifcfg-$netif
 
     # bridge needs different things written to ifcfg
-    if [ -z "$bridge" ] && [ -z "$bond" ]; then
+    if [ -z "$bridge" ] && [ -z "$bond" ] && [ -z "$vlan" ]; then
         # standard interface
         {
             if [ -n "$macaddr" ]; then
-                echo "MACADDR=$macaddr"
+                echo "MACADDR=\"$macaddr\""
             else
                 echo "HWADDR=\"$(cat /sys/class/net/$netif/address)\""
             fi
             print_s390 $netif
             echo "TYPE=Ethernet"
-            echo "NAME=\"Boot Disk\""
-            [ -n "$mtu" ] && echo "MTU=$mtu"
+            echo "NAME=\"$netif\""
+            [ -n "$mtu" ] && echo "MTU=\"$mtu\""
+        } >> /tmp/ifcfg/ifcfg-$netif
+    fi
+
+    if [ -n "$vlan" ] ; then
+        {
+            echo "TYPE=Vlan"
+            echo "NAME=\"$netif\""
+            echo "VLAN=yes"
+            echo "PHYSDEV=\"$phydevice\""
         } >> /tmp/ifcfg/ifcfg-$netif
     fi
 
@@ -155,22 +185,22 @@ for netif in $IFACES ; do
         {
             # This variable is an indicator of a bond interface for initscripts
             echo "BONDING_OPTS=\"$bondoptions\""
-            echo "NAME=\"Boot Disk\""
+            echo "NAME=\"$netif\""
+            echo "TYPE=Bond"
         } >> /tmp/ifcfg/ifcfg-$netif
 
         for slave in $bondslaves ; do
-            # Set ONBOOT=no to prevent initscripts from trying to setup already bonded physical interface
             # write separate ifcfg file for the raw eth interface
             {
                 echo "# Generated by dracut initrd"
-                echo "DEVICE=$slave"
+                echo "DEVICE=\"$slave\""
                 echo "TYPE=Ethernet"
-                echo "ONBOOT=no"
+                echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
-                echo "HWADDR=$(cat /sys/class/net/$slave/address)"
+                echo "HWADDR=\"$(cat /sys/class/net/$slave/address)\""
                 echo "SLAVE=yes"
-                echo "MASTER=$netif"
-                echo "NAME=$slave"
+                echo "MASTER=\"$netif\""
+                echo "NAME=\"$slave\""
             } >> /tmp/ifcfg/ifcfg-$slave
         done
     fi
@@ -179,52 +209,50 @@ for netif in $IFACES ; do
         # bridge
         {
             echo "TYPE=Bridge"
-            echo "NAME=\"Boot Disk\""
+            echo "NAME=\"$netif\""
         } >> /tmp/ifcfg/ifcfg-$netif
         if [ "$ethname" = "$bondname" ] ; then
             {
-                # Set ONBOOT=no to prevent initscripts from trying to setup already bridged bond interface
                 echo "# Generated by dracut initrd"
-                echo "DEVICE=$bondname"
-                echo "ONBOOT=no"
+                echo "DEVICE=\"$bondname\""
+                echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
                 # This variable is an indicator of a bond interface for initscripts
                 echo "BONDING_OPTS=\"$bondoptions\""
-                echo "BRIDGE=$netif"
+                echo "BRIDGE=\"$netif\""
                 echo "NAME=\"$bondname\""
             } >> /tmp/ifcfg/ifcfg-$bondname
             for slave in $bondslaves ; do
                 # write separate ifcfg file for the raw eth interface
-                # Set ONBOOT=no to prevent initscripts from trying to setup already bridged physical interface
                 {
                     echo "# Generated by dracut initrd"
-                    echo "DEVICE=$slave"
+                    echo "DEVICE=\"$slave\""
                     echo "TYPE=Ethernet"
-                    echo "ONBOOT=no"
+                    echo "ONBOOT=yes"
                     echo "NETBOOT=yes"
-                    echo "HWADDR=$(cat /sys/class/net/$slave/address)"
+                    echo "HWADDR=\"$(cat /sys/class/net/$slave/address)\""
                     echo "SLAVE=yes"
-                    echo "MASTER=$bondname"
-                    echo "NAME=$slave"
+                    echo "MASTER=\"$bondname\""
+                    echo "NAME=\"$slave\""
                 } >> /tmp/ifcfg/ifcfg-$slave
             done
         else
             # write separate ifcfg file for the raw eth interface
             {
                 echo "# Generated by dracut initrd"
-                echo "DEVICE=$ethname"
+                echo "DEVICE=\"$ethname\""
                 echo "TYPE=Ethernet"
-                echo "ONBOOT=no"
+                echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
-                echo "HWADDR=$(cat /sys/class/net/$ethname/address)"
-                echo "BRIDGE=$netif"
-                echo "NAME=$ethname"
+                echo "HWADDR=\"$(cat /sys/class/net/$ethname/address)\""
+                echo "BRIDGE=\"$netif\""
+                echo "NAME=\"$ethname\""
             } >> /tmp/ifcfg/ifcfg-$ethname
         fi
     fi
     i=1
     for ns in $(getargs nameserver); do
-        echo "DNS${i}=${ns}" >> /tmp/ifcfg/ifcfg-$netif
+        echo "DNS${i}=\"${ns}\"" >> /tmp/ifcfg/ifcfg-$netif
         i=$((i+1))
     done
 done

modules.d/45url-lib/module-setup.sh

@@ -12,19 +12,29 @@ depends() {
 }
 
 install() {
+    local _dir _crt _found _lib
     inst_simple "$moddir/url-lib.sh" "/lib/url-lib.sh"
-    dracut_install curl
+    inst_multiple curl
     # also install libs for curl https
     inst_libdir_file "libnsspem.so*"
     inst_libdir_file "libnsssysinit.so*"
     inst_libdir_file "libsoftokn3.so*"
     inst_libdir_file "libsqlite3.so*"
 
-    mkdir -m 0755 -p "$initdir/etc/ssl/certs"
-    if ! inst_any -t /etc/ssl/certs/ca-bundle.crt \
-            /etc/ssl/certs/ca-bundle.crt \
-            /etc/ssl/certs/ca-certificates.crt; then
-        dwarn "Couldn't find SSL CA cert bundle; HTTPS won't work."
-    fi
+    for _dir in $libdirs; do
+	[[ -d $_dir ]] || continue
+        for _lib in $_dir/libcurl.so.*; do
+	    [[ -e $_lib ]] || continue
+            _crt=$(grep -F --binary-files=text -z .crt $_lib)
+            [[ $_crt ]] || continue
+            [[ $_crt == /*/* ]] || continue
+            if ! inst_simple "$_crt"; then
+                dwarn "Couldn't install '$_crt' SSL CA cert bundle; HTTPS might not work."
+                continue
+            fi
+            _found=1
+        done
+    done
+    [[ $_found ]] || dwarn "Couldn't find SSL CA cert bundle; HTTPS won't work."
 }
 

modules.d/45url-lib/url-lib.sh

@@ -23,7 +23,7 @@ fetch_url() {
     local handler="$(get_url_handler $url)"
     [ -n "$handler" ] || return 254
     [ -n "$url" ] || return 255
-    $handler "$url" "$outloc"
+    "$handler" "$url" "$outloc"
 }
 
 # get_url_handler URL
@@ -54,14 +54,17 @@ add_url_handler() {
 
 export CURL_HOME="/run/initramfs/url-lib"
 mkdir -p $CURL_HOME
-curl_args="--location --retry 3 --fail --show-error"
-getargbool 0 rd.noverifyssl && curl_args+=" --insecure"
+curl_args="--globoff --location --retry 3 --fail --show-error"
+getargbool 0 rd.noverifyssl && curl_args="$curl_args --insecure"
+
+proxy=$(getarg proxy=)
+[ -n "$proxy" ] && curl_args="$curl_args --proxy $proxy"
 
 curl_fetch_url() {
     local url="$1" outloc="$2"
     echo "$url" > /proc/self/fd/0
     if [ -n "$outloc" ]; then
-        curl $curl_args --output "$outloc" "$url" || return $?
+        curl $curl_args --output - -- "$url" > "$outloc" || return $?
     else
         local outdir="$(mkuniqdir /tmp curl_fetch_url)"
         ( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
@@ -103,18 +106,18 @@ nfs_fetch_url() {
     local filepath="${path%/*}" filename="${path##*/}" mntdir=""
 
     # skip mount if server:/filepath is already mounted
-    mntdir=$(nfs_already_mounted $server $path)
+    mntdir=$(nfs_already_mounted "$server" "$path")
     if [ -z "$mntdir" ]; then
         local mntdir="$(mkuniqdir /run nfs_mnt)"
-        mount_nfs $nfs:$server:$filepath${options:+:$options} $mntdir
+        mount_nfs "$nfs:$server:$filepath${options:+:$options}" "$mntdir"
         # lazy unmount during pre-pivot hook
-        inst_hook --hook pre-pivot --name 99url-lib-umount-nfs umount -l $mntdir
+        inst_hook --hook pre-pivot --name 99url-lib-umount-nfs umount -l -- "$mntdir"
     fi
 
     if [ -z "$outloc" ]; then
         outloc="$mntdir/$filename"
     else
-        cp -f "$mntdir/$filename" "$outloc" || return $?
+        cp -f -- "$mntdir/$filename" "$outloc" || return $?
     fi
     [ -f "$outloc" ] || return 253
     if [ -z "$2" ]; then echo "$outloc" ; fi

modules.d/50drm/module-setup.sh

@@ -3,7 +3,7 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 check() {
-    return 0
+    return 255
 }
 
 depends() {
@@ -54,7 +54,7 @@ installkernel() {
         # as we could e.g. be in the installer; nokmsboot boot parameter will disable
         # loading of the driver if needed
         if [[ $hostonly ]] && modinfo -F alias $_modname | sed -e 's,\?,\.,g' -e 's,\*,\.\*,g' \
-            | grep -qxf - /sys/bus/pci/devices/*/modalias; then
+            | grep -qxf - /sys/bus/pci/devices/*/modalias 2>/dev/null; then
             hostonly='' instmods $_modname
             continue
         fi

modules.d/50gensplash/module-setup.sh

@@ -71,7 +71,7 @@ install() {
     mv dev.old dev
     popd >/dev/null
 
-    dracut_install chvt
+    inst_multiple chvt
     inst /usr/share/splashutils/initrd.splash /lib/gensplash-lib.sh
     inst_hook pre-pivot 90 "${moddir}"/gensplash-newroot.sh
     inst_hook pre-trigger 10 "${moddir}"/gensplash-pretrigger.sh

modules.d/50plymouth/module-setup.sh

@@ -4,7 +4,7 @@
 
 check() {
     [[ "$mount_needs" ]] && return 1
-    [[ -x /sbin/plymouthd && -x /bin/plymouth && -x /usr/sbin/plymouth-set-default-theme ]]
+    type -P plymouthd >/dev/null && type -P plymouth >/dev/null
 }
 
 depends() {
@@ -17,12 +17,16 @@ install() {
         . "$moddir"/plymouth-populate-initrd.sh
     else
         PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
-            /usr/libexec/plymouth/plymouth-populate-initrd -t $initdir
+            /usr/libexec/plymouth/plymouth-populate-initrd -t "$initdir"
     fi
 
-    inst_hook pre-pivot 90 "$moddir"/plymouth-newroot.sh
-    inst_hook pre-trigger 10 "$moddir"/plymouth-pretrigger.sh
     inst_hook emergency 50 "$moddir"/plymouth-emergency.sh
-    dracut_install readlink
+
+    inst_multiple readlink
+
+    if ! dracut_module_included "systemd"; then
+        inst_hook pre-trigger 10 "$moddir"/plymouth-pretrigger.sh
+        inst_hook pre-pivot 90 "$moddir"/plymouth-newroot.sh
+    fi
 }
 

modules.d/50plymouth/plymouth-emergency.sh

@@ -1,4 +1,4 @@
 #!/bin/sh
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
-[ -x /bin/plymouth ] && /bin/plymouth --hide-splash
+plymouth --hide-splash 2>/dev/null || :

modules.d/50plymouth/plymouth-newroot.sh

@@ -2,6 +2,6 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-if [ -x /bin/plymouth -a -z "$DRACUT_SYSTEMD" ]; then
-    /bin/plymouth --newroot=$NEWROOT
+if type plymouth >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
+    plymouth --newroot=$NEWROOT
 fi

modules.d/50plymouth/plymouth-populate-initrd.sh

@@ -4,17 +4,16 @@
 PLYMOUTH_LOGO_FILE="/usr/share/pixmaps/system-logo-white.png"
 PLYMOUTH_THEME=$(plymouth-set-default-theme)
 
-inst /sbin/plymouthd /bin/plymouthd
-dracut_install /bin/plymouth \
+inst_multiple plymouthd plymouth \
     "${PLYMOUTH_LOGO_FILE}" \
     /etc/system-release
 
 mkdir -m 0755 -p "${initdir}/usr/share/plymouth"
 
 inst_libdir_file "plymouth/text.so" "plymouth/details.so"
-    
+
 if [[ $hostonly ]]; then
-    dracut_install \
+    inst_multiple \
         "/usr/share/plymouth/themes/details/details.plymouth" \
         "/usr/share/plymouth/themes/text/text.plymouth" \
 
@@ -36,7 +35,7 @@ else
         [[ -f "$x" ]] || continue
         THEME_DIR=$(dirname "$x")
         mkdir -m 0755 -p "${initdir}/$THEME_DIR"
-        dracut_install "$x"
+        inst_multiple "$x"
     done
     (
         cd ${initdir}/usr/share/plymouth/themes;

modules.d/50plymouth/plymouth-pretrigger.sh

@@ -2,7 +2,7 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-if [ -x /bin/plymouthd -a -z "$DRACUT_SYSTEMD" ]; then
+if type plymouthd >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
     if getargbool 1 plymouth.enable && getargbool 1 rd.plymouth -d -n rd_NO_PLYMOUTH; then
         # first trigger graphics subsystem
         udevadm trigger --action=add --attr-match=class=0x030000 >/dev/null 2>&1
@@ -16,8 +16,8 @@ if [ -x /bin/plymouthd -a -z "$DRACUT_SYSTEMD" ]; then
         read consoledev rest < /sys/class/tty/console/active
         consoledev=${consoledev:-tty0}
         [ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev"
-        [ -x /bin/plymouthd ] && /bin/plymouthd --attach-to-session --pid-file /run/plymouth/pid
-        /bin/plymouth --show-splash 2>&1 | vinfo
+        plymouthd --attach-to-session --pid-file /run/plymouth/pid
+        plymouth --show-splash 2>&1 | vinfo
         # reset tty after plymouth messed with it
         [ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev"
     fi

modules.d/80cms/cmsifup.sh

@@ -27,12 +27,11 @@ else
 fi
 
 {
-    echo "ip=$IPADDR::$GATEWAY:$NETMASK:$HOSTNAME:$DEVICE:none:$MACADDR"
+    echo "ip=$IPADDR::$GATEWAY:$NETMASK:$HOSTNAME:$DEVICE:none:$MTU:$MACADDR"
     for i in $DNS1 $DNS2; do
 	echo "nameserver=$i"
     done
 } > /etc/cmdline.d/80-cms.conf
-unset CMDLINE
 
 [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
 IFACES="$IFACES $DEVICE"

modules.d/80cms/cmssetup.sh

@@ -51,152 +51,164 @@ function dasd_settle_all() {
         fi
     done
     return 0
-}
+    }
 
 # prints a canonocalized device bus ID for a given devno of any format
-function canonicalize_devno()
-{
-    case ${#1} in
-        3) echo "0.0.0${1}" ;;
-        4) echo "0.0.${1}" ;;
-        *) echo "${1}" ;;
-    esac
-    return 0
-}
+    function canonicalize_devno()
+    {
+        case ${#1} in
+            3) echo "0.0.0${1}" ;;
+            4) echo "0.0.${1}" ;;
+            *) echo "${1}" ;;
+        esac
+        return 0
+    }
 
 # read file from CMS and write it to /tmp
-function readcmsfile() # $1=dasdport $2=filename
-{
-    local dev
-    local numcpus
-    local devname
-    local ret=0
-    if [ $# -ne 2 ]; then return; fi
+    function readcmsfile() # $1=dasdport $2=filename
+    {
+        local dev
+        local numcpus
+        local devname
+        local ret=0
+        if [ $# -ne 2 ]; then return; fi
     # precondition: udevd created dasda block device node
-    if ! dasd_cio_free -d $1 ; then
-        echo $"DASD $1 could not be cleared from device blacklist"
-        return 1
-    fi
+        if ! dasd_cio_free -d $1 ; then
+            echo $"DASD $1 could not be cleared from device blacklist"
+            return 1
+        fi
 
-    modprobe dasd_mod dasd=$CMSDASD
-    modprobe dasd_eckd_mod
-    udevadm settle
+        modprobe dasd_mod dasd=$CMSDASD
+        modprobe dasd_eckd_mod
+        udevadm settle
 
     # precondition: dasd_eckd_mod driver incl. dependencies loaded,
     #               dasd_mod must be loaded without setting any DASD online
-    dev=$(canonicalize_devno $1)
-    numcpus=$(
-	while read line; do
-	    if strstr "$line" "# processors"; then
-		echo ${line##*:};
-		break;
-	    fi;
-	done < /proc/cpuinfo
-    )
+        dev=$(canonicalize_devno $1)
+        numcpus=$(
+	    while read line; do
+	        if strstr "$line" "# processors"; then
+		    echo ${line##*:};
+		    break;
+	        fi;
+	    done < /proc/cpuinfo
+        )
 
-    if [ ${numcpus} -eq 1 ]; then
-        echo 1 > /sys/bus/ccw/devices/$dev/online
-    else
-        if ! sysecho /sys/bus/ccw/devices/$dev/online 1; then
-            echo $"DASD $dev could not be set online"
-            return 1
+        if [ ${numcpus} -eq 1 ]; then
+            echo 1 > /sys/bus/ccw/devices/$dev/online
+        else
+            if ! sysecho /sys/bus/ccw/devices/$dev/online 1; then
+                echo $"DASD $dev could not be set online"
+                return 1
+            fi
+            udevadm settle
+            if ! dasd_settle $dev ; then
+                echo $"Could not access DASD $dev in time"
+                return 1
+            fi
         fi
+
         udevadm settle
-        if ! dasd_settle $dev ; then
-            echo $"Could not access DASD $dev in time"
-            return 1
+
+        devname=$(cd /sys/bus/ccw/devices/$dev/block; set -- *; [ -b /dev/$1 ] && echo $1)
+        devname=${devname:-dasda}
+
+        [[ -d /mnt ]] || mkdir /mnt
+        if cmsfs-fuse --to=UTF-8 -a /dev/$devname /mnt; then
+	    cat /mnt/$2 > /run/initramfs/$2
+            umount /mnt || umount -l /mnt
+            udevadm settle
+        else
+            echo $"Could not read conf file $2 on CMS DASD $1."
+            ret=1
         fi
-    fi
 
-    udevadm settle
-
-    devname=$(cd /sys/bus/ccw/devices/$dev/block; set -- *; [ -b /dev/$1 ] && echo $1)
-    devname=${devname:-dasda}
-
-    [[ -d /mnt ]] || mkdir /mnt
-    if cmsfs-fuse --to=UTF-8 -a /dev/$devname /mnt; then
-	cat /mnt/$2 > /run/initramfs/$2
-        umount /mnt || umount -l /mnt
-        udevadm settle
-    else
-        echo $"Could not read conf file $2 on CMS DASD $1."
-        ret=1
-    fi
-
-    if ! sysecho /sys/bus/ccw/devices/$dev/online 0; then
-        echo $"DASD $dev could not be set offline again"
+        if ! sysecho /sys/bus/ccw/devices/$dev/online 0; then
+            echo $"DASD $dev could not be set offline again"
         #return 1
-    fi
-    udevadm settle
+        fi
+        udevadm settle
 
     # unbind all dasds to unload the dasd modules for a clean start
-    ( cd /sys/bus/ccw/drivers/dasd-eckd; for i in *.*; do echo $i > unbind;done)
-    udevadm settle
-    modprobe -r dasd_eckd_mod
-    udevadm settle
-    modprobe -r dasd_diag_mod
-    udevadm settle
-    modprobe -r dasd_mod
-    udevadm settle
-    return $ret
-}
+        ( cd /sys/bus/ccw/drivers/dasd-eckd; for i in *.*; do echo $i > unbind;done)
+        udevadm settle
+        modprobe -r dasd_eckd_mod
+        udevadm settle
+        modprobe -r dasd_diag_mod
+        udevadm settle
+        modprobe -r dasd_mod
+        udevadm settle
+        return $ret
+    }
 
-processcmsfile()
-{
-    source /tmp/cms.conf
+    processcmsfile()
+    {
+        source /tmp/cms.conf
 
-    if [[ $NETTYPE ]]; then
-	(
-	    echo -n $NETTYPE,$SUBCHANNELS
-	    [[ $PORTNAME ]] && echo ",portname=$PORTNAME"
-	    [[ $LAYER2 ]] && echo ",layer2=$LAYER"
-	    [[ "$NETTYPE" = "ctc" ]] && [[ $CTCPROT ]] && echo ",protocol=$CTCPROT"
-	    echo
-	) >> /etc/ccw.conf
+        if [[ $NETTYPE ]]; then
+	    (
+	        echo -n $NETTYPE,$SUBCHANNELS
+	        [[ $PORTNAME ]] && echo -n ",portname=$PORTNAME"
+	        [[ $LAYER2 ]] && echo -n ",layer2=$LAYER2"
+	        [[ "$NETTYPE" = "ctc" ]] && [[ $CTCPROT ]] && echo -n ",protocol=$CTCPROT"
+	        echo
+	    ) >> /etc/ccw.conf
 
-	OLDIFS=$IFS
-	IFS=,
-	read -a subch_array <<< "indexzero,$SUBCHANNELS"
-	IFS=$OLDIFS
-	devbusid=${subch_array[1]}
-        if [ "$NETTYPE" = "ctc" ]; then
-            driver="ctcm"
-        else
-            driver=$NETTYPE
+	    OLDIFS=$IFS
+	    IFS=,
+	    read -a subch_array <<< "indexzero,$SUBCHANNELS"
+	    IFS=$OLDIFS
+	    devbusid=${subch_array[1]}
+            if [ "$NETTYPE" = "ctc" ]; then
+                driver="ctcm"
+            else
+                driver=$NETTYPE
+            fi
+
+	    printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="%s", KERNELS=="%s", ENV{INTERFACE}=="?*", RUN+="/sbin/initqueue --onetime --unique --name cmsifup-$env{INTERFACE} /sbin/cmsifup $env{INTERFACE}"\n' "$driver" "$devbusid" > /etc/udev/rules.d/99-cms.rules
+        # remove the default net rules
+            rm -f -- /etc/udev/rules.d/91-default-net.rules
+	    [[ -f /etc/udev/rules.d/90-net.rules ]] \
+	        || printf 'SUBSYSTEM=="net", ACTION=="online", RUN+="/sbin/initqueue --onetime --env netif=$env{INTERFACE} source_hook initqueue/online"\n' >> /etc/udev/rules.d/99-cms.rules
+            udevadm control --reload
+	    znet_cio_free
         fi
 
-	printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="%s", KERNELS=="%s", ENV{INTERFACE}=="?*", RUN+="/sbin/initqueue --onetime --unique --name cmsifup-$env{INTERFACE} /sbin/cmsifup $env{INTERFACE}"\n' "$driver" "$devbusid" > /etc/udev/rules.d/99-cms.rules
-        # remove the default net rules
-        rm -f /etc/udev/rules.d/91-default-net.rules
-	[[ -f /etc/udev/rules.d/90-net.rules ]] \
-	    || printf 'SUBSYSTEM=="net", ACTION=="online", RUN+="/sbin/initqueue --onetime --env netif=$env{INTERFACE} source_hook initqueue/online"\n' >> /etc/udev/rules.d/99-cms.rules
+        if [[ $DASD ]]; then
+	    echo $DASD | normalize_dasd_arg > /etc/dasd.conf
+	    echo "options dasd_mod dasd=$DASD" > /etc/modprobe.d/dasd_mod.conf
+	    dasd_cio_free
+        fi
 
-	znet_cio_free
-    fi
+        unset _do_zfcp
+        for i in ${!FCP_*}; do
+	    echo "${!i}" | while read port rest; do
+                case $port in
+                *.*.*)
+                    ;;
+                *.*)
+                    port="0.$port"
+                    ;;
+                *)
+                    port="0.0.$port"
+                    ;;
+                esac
+                echo $port $rest >> /etc/zfcp.conf
+            done
+	    _do_zfcp=1
+        done
+        [[ $_do_zfcp ]] && zfcp_cio_free
+        unset _do_zfcp
+    }
 
-    if [[ $DASD ]]; then
-	echo $DASD | normalize_dasd_arg > /etc/dasd.conf
-	echo "options dasd_mod dasd=$DASD" > /etc/modprobe.d/dasd_mod.conf
-	dasd_cio_free
-    fi
-
-    unset _do_zfcp
-    for i in ${!FCP_*}; do
-	echo "${!i}" >> /etc/zfcp.conf
-	_do_zfcp=1
-    done
-    [[ $_do_zfcp ]] && zfcp_cio_free
-    unset _do_zfcp
-}
-
-[[ $CMSDASD ]] || CMSDASD=$(getarg "CMSDASD=")
-[[ $CMSCONFFILE ]] || CMSCONFFILE=$(getarg "CMSCONFFILE=")
+    [[ $CMSDASD ]] || CMSDASD=$(getarg "CMSDASD=")
+    [[ $CMSCONFFILE ]] || CMSCONFFILE=$(getarg "CMSCONFFILE=")
 
 # Parse configuration
-if [ -n "$CMSDASD" -a -n "$CMSCONFFILE" ]; then
-    if readcmsfile $CMSDASD $CMSCONFFILE; then
-        ln -s /run/initramfs/$CMSCONFFILE /tmp/$CMSCONFFILE
-        ln -s /run/initramfs/$CMSCONFFILE /tmp/cms.conf
-        processcmsfile
+    if [ -n "$CMSDASD" -a -n "$CMSCONFFILE" ]; then
+        if readcmsfile $CMSDASD $CMSCONFFILE; then
+            ln -s /run/initramfs/$CMSCONFFILE /tmp/$CMSCONFFILE
+            ln -s /run/initramfs/$CMSCONFFILE /tmp/cms.conf
+            processcmsfile
+        fi
     fi
-fi

modules.d/80cms/module-setup.sh

@@ -23,10 +23,11 @@ install() {
     inst_hook pre-trigger 30 "$moddir/cmssetup.sh"
     inst_hook pre-pivot 95 "$moddir/cms-write-ifcfg.sh"
     inst_script "$moddir/cmsifup.sh" /sbin/cmsifup
-    dracut_install /etc/cmsfs-fuse/filetypes.conf /etc/udev/rules.d/99-fuse.rules /etc/fuse.conf \
+    inst_multiple /etc/cmsfs-fuse/filetypes.conf /etc/udev/rules.d/99-fuse.rules /etc/fuse.conf \
         cmsfs-fuse fusermount ulockmgr_server bash insmod rmmod cat normalize_dasd_arg sed \
         $(rpm -ql s390utils-base)
 
     inst_libdir_file "gconv/*"
     #inst /usr/lib/locale/locale-archive
+    dracut_need_initqueue
 }

modules.d/90btrfs/80-btrfs.rules

@@ -1,11 +1,8 @@
 SUBSYSTEM!="block", GOTO="btrfs_end"
 ACTION!="add|change", GOTO="btrfs_end"
 ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end"
-RUN+="/sbin/modprobe btrfs"
 RUN+="/sbin/btrfs device scan $env{DEVNAME}"
 
 RUN+="/sbin/initqueue --finished --unique --name btrfs_finished /sbin/btrfs_finished"
-RUN+="/sbin/initqueue --timeout --onetime --unique --name btrfs_timeout /sbin/btrfs_timeout"
 
 LABEL="btrfs_end"
-

modules.d/90btrfs/btrfs_device_ready.sh

@@ -0,0 +1,21 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+
+btrfs_check_complete() {
+    local _rootinfo _dev
+    _dev="${1:-/dev/root}"
+    [ -e "$_dev" ] || return 0
+    _rootinfo=$(udevadm info --query=env "--name=$_dev" 2>/dev/null)
+    if strstr "$_rootinfo" "ID_FS_TYPE=btrfs"; then
+        info "Checking, if btrfs device complete"
+        btrfs device ready "$_dev" >/dev/null 2>&1
+        return $?
+    fi
+    return 0
+}
+
+btrfs_check_complete $1
+exit $?

modules.d/90btrfs/btrfs_timeout.sh

@@ -5,5 +5,4 @@
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
 
 info "Scanning for all btrfs devices"
-/sbin/btrfs device scan 2>&1 | vinfo
-exit 0
+/sbin/btrfs device scan >/dev/null 2>&1

modules.d/90btrfs/module-setup.sh

@@ -9,12 +9,10 @@ check() {
     type -P btrfs >/dev/null || return 1
 
     [[ $hostonly ]] || [[ $mount_needs ]] && {
-        local _found
         for fs in ${host_fs_types[@]}; do
-            strstr "$fs" "\|btrfs" && _found="1"
+            [[ "$fs" == "btrfs" ]] && return 0
         done
-        [[ $_found ]] || return 1
-        unset _found
+        return 255
     }
 
     return 0
@@ -30,10 +28,21 @@ installkernel() {
 }
 
 install() {
-    inst_rules "$moddir/80-btrfs.rules"
-    inst_script "$moddir/btrfs_finished.sh" /sbin/btrfs_finished
-    inst_script "$moddir/btrfs_timeout.sh" /sbin/btrfs_timeout
-    dracut_install btrfsck
+    if ! inst_rules 64-btrfs.rules; then
+        inst_rules "$moddir/80-btrfs.rules"
+        case "$(btrfs --help)" in
+            *device\ ready*)
+                inst_script "$moddir/btrfs_device_ready.sh" /sbin/btrfs_finished ;;
+            *)
+                inst_script "$moddir/btrfs_finished.sh" /sbin/btrfs_finished ;;
+        esac
+    fi
+
+    if ! dracut_module_included "systemd"; then
+        inst_hook initqueue/timeout 10 "$moddir/btrfs_timeout.sh"
+    fi
+
+    inst_multiple -o btrfsck btrfs-zero-log
     inst $(command -v btrfs) /sbin/btrfs
 }
 

modules.d/90crypt/crypt-cleanup.sh

@@ -2,7 +2,7 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 # close everything which is not busy
-rm -f /etc/udev/rules.d/70-luks.rules >/dev/null 2>&1
+rm -f -- /etc/udev/rules.d/70-luks.rules >/dev/null 2>&1
 
 if ! getarg rd.luks.uuid -d rd_LUKS_UUID >/dev/null 2>&1 && getargbool 1 rd.luks -d -n rd_NO_LUKS >/dev/null 2>&1; then
     while true; do

modules.d/90crypt/crypt-lib.sh

@@ -4,6 +4,19 @@
 
 command -v getarg >/dev/null || . /lib/dracut-lib.sh
 
+# check if the crypttab contains an entry for a LUKS UUID
+crypttab_contains() {
+    local luks="$1"
+    local l d rest
+    if [ -f /etc/crypttab ]; then
+        while read l d rest; do
+            strstr "${l##luks-}" "${luks##luks-}" && return 0
+            strstr "$d" "${luks##luks-}" && return 0
+        done < /etc/crypttab
+    fi
+    return 1
+}
+
 # ask_for_password
 #
 # Wraps around plymouth ask-for-password and adds fallback to tty password ask
@@ -47,8 +60,8 @@ ask_for_password() {
 
     { flock -s 9;
         # Prompt for password with plymouth, if installed and running.
-        if [ -x /bin/plymouth ] && /bin/plymouth --ping; then
-            /bin/plymouth ask-for-password \
+        if type plymouth >/dev/null 2>&1 && plymouth --ping 2>/dev/null; then
+            plymouth ask-for-password \
                 --prompt "$ply_prompt" --number-of-tries=$ply_tries \
                 --command="$ply_cmd"
             ret=$?

modules.d/90crypt/crypt-run-generator.sh

@@ -3,15 +3,12 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 . /lib/dracut-lib.sh
+type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh
 
 dev=$1
 luks=$2
 
-if [ -f /etc/crypttab ]; then
-    while read l rest; do
-        strstr "${l##luks-}" "${luks##luks-}" && exit 0
-    done < /etc/crypttab
-fi
+crypttab_contains "$luks" && exit 0
 
 allowdiscards="-"
 

modules.d/90crypt/module-setup.sh

@@ -7,25 +7,11 @@ check() {
     # if cryptsetup is not installed, then we cannot support encrypted devices.
     type -P cryptsetup >/dev/null || return 1
 
-    check_crypt() {
-        local dev=$1 fs=$2
-        [[ $fs = "crypto_LUKS" ]] || return 1
-        ID_FS_UUID=$(udevadm info --query=property --name=$dev \
-            | while read line; do
-                [[ ${line#ID_FS_UUID} = $line ]] && continue
-                eval "$line"
-                echo $ID_FS_UUID
-                break
-                done)
-        [[ ${ID_FS_UUID} ]] || return 1
-        if ! [[ $kernel_only ]]; then
-            echo " rd.luks.uuid=luks-${ID_FS_UUID} " >> "${initdir}/etc/cmdline.d/90crypt.conf"
-        fi
-        return 0
-    }
-
     [[ $hostonly ]] || [[ $mount_needs ]] && {
-        for_each_host_dev_fs check_crypt || return 1
+        for fs in "${host_fs_types[@]}"; do
+            [[ $fs = "crypto_LUKS" ]] && return 0
+        done
+        return 255
     }
 
     return 0
@@ -40,18 +26,60 @@ installkernel() {
     instmods dm_crypt =crypto
 }
 
+cmdline() {
+    local dev UUID
+    for dev in "${!host_fs_types[@]}"; do
+        [[ "${host_fs_types[$dev]}" != "crypto_LUKS" ]] && continue
+
+        UUID=$(
+            blkid -u crypto -o export $dev \
+                | while read line; do
+                [[ ${line#UUID} = $line ]] && continue
+                printf "%s" "${line#UUID=}"
+                break
+            done
+        )
+        [[ ${UUID} ]] || continue
+        printf "%s" " rd.luks.uuid=luks-${UUID}"
+    done
+}
+
 install() {
-    dracut_install cryptsetup rmdir readlink umount
+
+    cmdline >> "${initdir}/etc/cmdline.d/90crypt.conf"
+    echo >> "${initdir}/etc/cmdline.d/90crypt.conf"
+
+    inst_multiple cryptsetup rmdir readlink umount
     inst_script "$moddir"/cryptroot-ask.sh /sbin/cryptroot-ask
     inst_script "$moddir"/probe-keydev.sh /sbin/probe-keydev
     inst_hook cmdline 10 "$moddir/parse-keydev.sh"
     inst_hook cmdline 30 "$moddir/parse-crypt.sh"
-    inst_hook cleanup 30 "$moddir/crypt-cleanup.sh"
-    [[ $hostonly ]]  && inst_simple /etc/crypttab
+    if ! dracut_module_included "systemd"; then
+        inst_hook cleanup 30 "$moddir/crypt-cleanup.sh"
+    fi
+
+    if [[ $hostonly ]] && [[ -f /etc/crypttab ]]; then
+        # filter /etc/crypttab for the devices we need
+        while read _mapper _dev _rest; do
+            [[ $_mapper = \#* ]] && continue
+            [[ $_dev ]] || continue
+
+            [[ $_dev == UUID=* ]] && \
+                _dev="/dev/disk/by-uuid/${_dev#UUID=}"
+
+            for _hdev in "${!host_fs_types[@]}"; do
+                [[ ${host_fs_types[$_hdev]} == "crypto_LUKS" ]] || continue
+                if [[ $_hdev -ef $_dev ]] || [[ /dev/block/$_hdev -ef $_dev ]]; then
+                    echo "$_mapper $_dev $_rest"
+                    break
+                fi
+            done
+        done < /etc/crypttab > $initdir/etc/crypttab
+    fi
+
     inst_simple "$moddir/crypt-lib.sh" "/lib/dracut-crypt-lib.sh"
 
-    dracut_install -o \
-        $systemdutildir/system-generators/systemd-cryptsetup-generator \
+    inst_multiple -o \
         $systemdutildir/system-generators/systemd-cryptsetup-generator \
         $systemdutildir/systemd-cryptsetup \
         $systemdsystemunitdir/systemd-ask-password-console.path \
@@ -60,4 +88,5 @@ install() {
         $systemdsystemunitdir/sysinit.target.wants/cryptsetup.target \
         systemd-ask-password systemd-tty-ask-password-agent
     inst_script "$moddir"/crypt-run-generator.sh /sbin/crypt-run-generator
+    dracut_need_initqueue
 }

modules.d/90crypt/parse-crypt.sh

@@ -2,9 +2,11 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh
+
 if ! getargbool 1 rd.luks -d -n rd_NO_LUKS; then
     info "rd.luks=0: removing cryptoluks activation"
-    rm -f /etc/udev/rules.d/70-luks.rules
+    rm -f -- /etc/udev/rules.d/70-luks.rules
 else
     {
         echo 'SUBSYSTEM!="block", GOTO="luks_end"'
@@ -23,18 +25,20 @@ else
                 {
                     printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", '
                     printf -- 'ENV{ID_FS_UUID}=="*%s*", ' $luksid
-                    printf -- 'RUN+="%s --unique --onetime ' $(command -v initqueue)
+                    printf -- 'RUN+="%s --settled --unique --onetime ' $(command -v initqueue)
                     printf -- '--name cryptroot-ask-%%k %s ' $(command -v cryptroot-ask)
                     printf -- '$env{DEVNAME} luks-$env{ID_FS_UUID} %s"\n' $tout
                 } >> /etc/udev/rules.d/70-luks.rules.new
             else
-                {
-                    printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", '
-                    printf -- 'ENV{ID_FS_UUID}=="*%s*", ' $luksid
-                    printf -- 'RUN+="%s --unique --onetime ' $(command -v initqueue)
-                    printf -- '--name crypt-run-generator-%%k %s ' $(command -v crypt-run-generator)
-                    printf -- '$env{DEVNAME} luks-$env{ID_FS_UUID}"\n'
-                } >> /etc/udev/rules.d/70-luks.rules.new
+                if ! crypttab_contains "$luksid"; then
+                    {
+                        printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", '
+                        printf -- 'ENV{ID_FS_UUID}=="*%s*", ' $luksid
+                        printf -- 'RUN+="%s --settled --unique --onetime ' $(command -v initqueue)
+                        printf -- '--name systemd-cryptsetup-%%k %s start ' $(command -v systemctl)
+                        printf -- 'systemd-cryptsetup@luks$$(dev_unit_name -$env{ID_FS_UUID}).service"\n'
+                    } >> /etc/udev/rules.d/70-luks.rules.new
+                fi
             fi
 
             uuid=$luksid
@@ -51,13 +55,13 @@ else
         if [ -z "$DRACUT_SYSTEMD" ]; then
             {
                 printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="%s ' $(command -v initqueue)
-                printf -- '--unique --onetime --name cryptroot-ask-%%k '
+                printf -- '--unique --settled --onetime --name cryptroot-ask-%%k '
                 printf -- '%s $env{DEVNAME} luks-$env{ID_FS_UUID} %s"\n' $(command -v cryptroot-ask) $tout
             } >> /etc/udev/rules.d/70-luks.rules.new
         else
             {
                 printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="%s ' $(command -v initqueue)
-                printf -- '--unique --onetime --name crypt-run-generator-%%k '
+                printf -- '--unique --settled --onetime --name crypt-run-generator-%%k '
                 printf -- '%s $env{DEVNAME} luks-$env{ID_FS_UUID}"\n' $(command -v crypt-run-generator)
             } >> /etc/udev/rules.d/70-luks.rules.new
         fi

modules.d/90dm/59-persistent-storage-dm.rules

@@ -0,0 +1,15 @@
+SUBSYSTEM!="block", GOTO="dm_end"
+ACTION!="add|change", GOTO="dm_end"
+# Also don't process disks that are slated to be a multipath device
+ENV{DM_MULTIPATH_DEVICE_PATH}=="?*", GOTO="dm_end"
+
+KERNEL!="dm-[0-9]*", GOTO="dm_end"
+ACTION=="add", GOTO="dm_end"
+IMPORT{program}="/sbin/dmsetup info -c --nameprefixes --unquoted --rows --noheadings -o name,uuid,suspended,readonly,major,minor,open,tables_loaded,names_using_dev -j%M -m%m"
+ENV{DM_NAME}!="?*", GOTO="dm_end"
+ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_end"
+ENV{DM_UUID}=="CRYPT-TEMP-?*", GOTO="dm_end"
+ENV{DM_UUID}!="?*", ENV{DM_NAME}=="temporary-cryptsetup-?*", GOTO="dm_end"
+IMPORT BLKID
+
+LABEL="dm_end"

modules.d/90dm/module-setup.sh

@@ -20,8 +20,8 @@ install() {
     modinfo -k $kernel dm_mod >/dev/null 2>&1 && \
         inst_hook pre-udev 30 "$moddir/dm-pre-udev.sh"
 
-    dracut_install dmsetup
-    dracut_install -o dmeventd
+    inst_multiple dmsetup
+    inst_multiple -o dmeventd
 
     inst_libdir_file "libdevmapper-event.so*"
 
@@ -29,9 +29,14 @@ install() {
     # Gentoo ebuild for LVM2 prior to 2.02.63-r1 doesn't install above rules
     # files, but provides the one below:
     inst_rules 64-device-mapper.rules
+    # debian udev rules
+    inst_rules 60-persistent-storage-dm.rules 55-dm.rules
 
     inst_rules "$moddir/11-dm.rules"
 
+    inst_rules "$moddir/59-persistent-storage-dm.rules"
+    prepare_udev_rules 59-persistent-storage-dm.rules
+
     inst_hook shutdown 30 "$moddir/dm-shutdown.sh"
 }
 

modules.d/90dmraid/dmraid.sh

@@ -27,8 +27,7 @@ if [ -n "$DM_RAIDS" ] || getargbool 0 rd.auto; then
             for s in $SETS; do
                 if [ "${s##$r}" != "$s" ]; then
                     info "Activating $s"
-                    dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
-                    [ -e "/dev/mapper/$s" ] && kpartx -a -p p "/dev/mapper/$s" 2>&1 | vinfo
+                    dmraid -ay -i --rm_partitions "$s" 2>&1 | vinfo
                     udevsettle
                 fi
             done
@@ -37,8 +36,7 @@ if [ -n "$DM_RAIDS" ] || getargbool 0 rd.auto; then
     # scan and activate all DM RAIDS
         for s in $SETS; do
             info "Activating $s"
-            dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
-            [ -e "/dev/mapper/$s" ] && kpartx -a -p p "/dev/mapper/$s" 2>&1 | vinfo
+            dmraid -ay -i --rm_partitions "$s" 2>&1 | vinfo
         done
     fi
 

modules.d/90dmraid/module-setup.sh

@@ -8,37 +8,20 @@ check() {
     # in trying to support it in the initramfs.
     type -P dmraid >/dev/null || return 1
 
-    check_dmraid() {
-        local dev=$1 fs=$2 holder DEVPATH DM_NAME
-        [[ "$fs" = "${fs%%_raid_member}" ]] && return 1
-
-        DEVPATH=$(udevadm info --query=property --name=$dev \
-            | while read line; do
-                [[ ${line#DEVPATH} = $line ]] && continue
-                eval "$line"
-                echo $DEVPATH
-                break
-                done)
-        for holder in /sys/$DEVPATH/holders/*; do
-            [[ -e $holder ]] || continue
-            DM_NAME=$(udevadm info --query=property --path=$holder \
-                | while read line; do
-                    [[ ${line#DM_NAME} = $line ]] && continue
-                    eval "$line"
-                    echo $DM_NAME
-                    break
-                    done)
-        done
-
-        [[ ${DM_NAME} ]] || return 1
-        if ! [[ $kernel_only ]]; then
-            echo " rd.dm.uuid=${DM_NAME} " >> "${initdir}/etc/cmdline.d/90dmraid.conf"
-        fi
-        return 0
-    }
-
     [[ $hostonly ]] || [[ $mount_needs ]] && {
-        for_each_host_dev_fs check_dmraid || return 1
+        for dev in "${!host_fs_types[@]}"; do
+            [[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
+
+            DEVPATH=$(get_devpath_block "$dev")
+
+            for holder in "$DEVPATH"/holders/*; do
+                [[ -e "$holder" ]] || continue
+                [[ -e "$holder/dm" ]] && return 0
+                break
+            done
+
+        done
+        return 255
     }
 
     return 0
@@ -49,10 +32,40 @@ depends() {
     return 0
 }
 
+cmdline() {
+    local _activated
+    declare -A _activated
+
+    for dev in "${!host_fs_types[@]}"; do
+        local holder DEVPATH DM_NAME majmin
+        [[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
+
+        DEVPATH=$(get_devpath_block "$dev")
+
+        for holder in "$DEVPATH"/holders/*; do
+            [[ -e "$holder" ]] || continue
+            dev="/dev/${holder##*/}"
+            DM_NAME="$(dmsetup info -c --noheadings -o name "$dev" 2>/dev/null)"
+            [[ ${DM_NAME} ]] && break
+        done
+
+        [[ ${DM_NAME} ]] || continue
+
+        if ! [[ ${_activated[${DM_NAME}]} ]]; then
+            printf "%s" " rd.dm.uuid=${DM_NAME}"
+            _activated["${DM_NAME}"]=1
+        fi
+    done
+}
+
 install() {
     local _i
-    dracut_install dmraid
-    dracut_install -o kpartx
+
+    cmdline >> "${initdir}/etc/cmdline.d/90dmraid.conf"
+    echo >> "${initdir}/etc/cmdline.d/90dmraid.conf"
+
+    inst_multiple dmraid
+    inst_multiple -o kpartx
     inst $(command -v partx) /sbin/partx
 
     inst "$moddir/dmraid.sh" /sbin/dmraid_scan

modules.d/90dmraid/parse-dm.sh

@@ -7,12 +7,16 @@ if ! getargbool 1 rd.dm -d -n rd_NO_DM || getarg "rd.dm=0" -d nodmraid; then
     udevproperty rd_NO_DM=1
 fi
 
-if  ! command -v mdadm >/dev/null || ! getargbool 1 rd.md.imsm -d -n rd_NO_MDIMSM -n noiswmd; then
+if  ! command -v mdadm >/dev/null \
+    || ! getargbool 1 rd.md.imsm -d -n rd_NO_MDIMSM -n noiswmd \
+    || ! getargbool 1 rd.md -d -n rd_NO_MD; then
     info "rd.md.imsm=0: no MD RAID for imsm/isw raids"
     udevproperty rd_NO_MDIMSM=1
 fi
 
-if  ! command -v mdadm >/dev/null || ! getargbool 1 rd.md.ddf -n rd_NO_MDDDF -n noddfmd; then
+if  ! command -v mdadm >/dev/null \
+    || ! getargbool 1 rd.md.ddf -n rd_NO_MDDDF -n noddfmd \
+    || ! getargbool 1 rd.md -d -n rd_NO_MD; then
     info "rd.md.ddf=0: no MD RAID for SNIA ddf raids"
     udevproperty rd_NO_MDDDF=1
 fi

modules.d/90dmsquash-live/dmsquash-live-root.sh

@@ -19,6 +19,9 @@ livedev="$1"
 # specified as their own things
 live_dir=$(getarg rd.live.dir -d live_dir)
 [ -z "$live_dir" ] && live_dir="LiveOS"
+squash_image=$(getarg rd.live.squashimg)
+[ -z "$squash_image" ] && squash_image="squashfs.img"
+
 getargbool 0 rd.live.ram -d -y live_ram && live_ram="yes"
 getargbool 0 rd.live.overlay.reset -d -y reset_overlay && reset_overlay="yes"
 getargbool 0 rd.live.overlay.readonly -d -y readonly_overlay && readonly_overlay="--readonly" || readonly_overlay=""
@@ -31,7 +34,7 @@ if [ "$fs" = "iso9660" -o "$fs" = "udf" ]; then
 fi
 getarg rd.live.check -d check || check=""
 if [ -n "$check" ]; then
-    [ -x /bin/plymouth ] && /bin/plymouth --hide-splash
+    type plymouth >/dev/null 2>&1 && plymouth --hide-splash
     if [ -n "$DRACUT_SYSTEMD" ]; then
         p=$(str_replace "$livedev" "-" '\x2d')
         systemctl start checkisomd5@${p}.service
@@ -42,16 +45,19 @@ if [ -n "$check" ]; then
         die "CD check failed!"
         exit 1
     fi
-    [ -x /bin/plymouth ] && /bin/plymouth --show-splash
+    type plymouth >/dev/null 2>&1 && plymouth --show-splash
 fi
 
 ln -s $livedev /run/initramfs/livedev
 
 # determine filesystem type for a filesystem image
 det_img_fs() {
+    udevadm settle
     blkid -s TYPE -u noraid -o value "$1"
 }
 
+modprobe squashfs
+CMDLINE=$(getcmdline)
 for arg in $CMDLINE; do case $arg in ro|rw) liverw=$arg ;; esac; done
 # mount the backing of the live image first
 mkdir -m 0755 -p /run/initramfs/live
@@ -110,18 +116,34 @@ do_live_overlay() {
         umount -l /run/initramfs/overlayfs || :
     fi
 
-    if [ -z "$setup" ]; then
-        if [ -n "$devspec" -a -n "$pathspec" ]; then
+    if [ -z "$setup" -o -n "$readonly_overlay" ]; then
+        if [ -n "$setup" ]; then
+            warn "Using temporary overlay."
+        elif [ -n "$devspec" -a -n "$pathspec" ]; then
             warn "Unable to find persistent overlay; using temporary"
             sleep 5
         fi
 
         dd if=/dev/null of=/overlay bs=1024 count=1 seek=$((512*1024)) 2> /dev/null
-        losetup $OVERLAY_LOOPDEV /overlay
+        if [ -n "$setup" -a -n "$readonly_overlay" ]; then
+            RO_OVERLAY_LOOPDEV=$( losetup -f )
+            losetup $RO_OVERLAY_LOOPDEV /overlay
+        else
+            losetup $OVERLAY_LOOPDEV /overlay
+        fi
     fi
 
     # set up the snapshot
-    echo 0 `blockdev --getsz $BASE_LOOPDEV` snapshot $BASE_LOOPDEV $OVERLAY_LOOPDEV p 8 | dmsetup create $readonly_overlay live-rw
+    sz=$(blockdev --getsz $BASE_LOOPDEV)
+    if [ -n "$readonly_overlay" ]; then
+        echo 0 $sz snapshot $BASE_LOOPDEV $OVERLAY_LOOPDEV p 8 | dmsetup create $readonly_overlay live-ro
+        base="/dev/mapper/live-ro"
+        over=$RO_OVERLAY_LOOPDEV
+    else
+        base=$BASE_LOOPDEV
+        over=$OVERLAY_LOOPDEV
+    fi
+    echo 0 $sz snapshot $base $over p 8 | dmsetup create live-rw
 }
 
 # live cd helper function
@@ -161,8 +183,8 @@ if [ -n "$FSIMG" ] ; then
 fi
 
 # we might have an embedded fs image on squashfs (compressed live)
-if [ -e /run/initramfs/live/${live_dir}/squashfs.img ]; then
-    SQUASHED="/run/initramfs/live/${live_dir}/squashfs.img"
+if [ -e /run/initramfs/live/${live_dir}/${squash_image} ]; then
+    SQUASHED="/run/initramfs/live/${live_dir}/${squash_image}"
 fi
 
 if [ -e "$SQUASHED" ] ; then

modules.d/90dmsquash-live/iso-scan.sh

@@ -0,0 +1,38 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+
+PATH=/usr/sbin:/usr/bin:/sbin:/bin
+
+isofile=$1
+
+[ -z "$isofile" ] && exit 1
+
+ismounted "/run/initramfs/isoscan" && exit 0
+
+mkdir -p "/run/initramfs/isoscan"
+
+do_iso_scan() {
+    local _name
+    local dev
+    for dev in /dev/disk/by-uuid/*; do
+        _name=$(dev_unit_name "$dev")
+        [ -e /tmp/isoscan-${_name} ] && continue
+        > /tmp/isoscan-${_name}
+        mount -t auto -o ro "$dev" "/run/initramfs/isoscan" || continue
+        if [ -f "/run/initramfs/isoscan/$isofile" ]; then
+            losetup -f "/run/initramfs/isoscan/$isofile"
+            rm -f -- "$job"
+            exit 0
+        else
+            umount "/run/initramfs/isoscan"
+        fi
+    done
+}
+
+do_iso_scan
+
+rmdir "/run/initramfs/isoscan"
+exit 1

modules.d/90dmsquash-live/module-setup.sh

@@ -16,19 +16,21 @@ depends() {
 }
 
 installkernel() {
-    instmods squashfs loop
+    instmods squashfs loop iso9660
 }
 
 install() {
-    dracut_install umount dmsetup blkid dd losetup grep blockdev
-    dracut_install -o checkisomd5
+    inst_multiple umount dmsetup blkid dd losetup grep blockdev
+    inst_multiple -o checkisomd5
     inst_hook cmdline 30 "$moddir/parse-dmsquash-live.sh"
+    inst_hook cmdline 31 "$moddir/parse-iso-scan.sh"
     inst_hook pre-udev 30 "$moddir/dmsquash-live-genrules.sh"
     inst_hook pre-udev 30 "$moddir/dmsquash-liveiso-genrules.sh"
     inst_hook pre-pivot 20 "$moddir/apply-live-updates.sh"
     inst_script "$moddir/dmsquash-live-root.sh" "/sbin/dmsquash-live-root"
+    inst_script "$moddir/iso-scan.sh" "/sbin/iso-scan"
     # should probably just be generally included
     inst_rules 60-cdrom_id.rules
     inst_simple "$moddir/checkisomd5@.service" "/etc/systemd/system/checkisomd5@.service"
+    dracut_need_initqueue
 }
-

modules.d/90dmsquash-live/parse-dmsquash-live.sh

@@ -34,6 +34,14 @@ case "$liveroot" in
         root="${root#live:}"
         root="live:/dev/disk/by-uuid/${root#UUID=}"
         rootok=1 ;;
+    live:PARTUUID=*|PARTUUID=*) \
+        root="${root#live:}"
+        root="live:/dev/disk/by-partuuid/${root#PARTUUID=}"
+        rootok=1 ;;
+    live:PARTLABEL=*|PARTLABEL=*) \
+        root="${root#live:}"
+        root="live:/dev/disk/by-partlabel/${root#PARTLABEL=}"
+        rootok=1 ;;
     live:/*.[Ii][Ss][Oo]|/*.[Ii][Ss][Oo])
         root="${root#live:}"
         root="liveiso:${root}"

modules.d/90dmsquash-live/parse-iso-scan.sh

@@ -0,0 +1,11 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+# live images are specified with
+# root=live:backingdev
+
+isofile=$(getarg iso-scan/filename)
+
+if [ -n "$isofile" ]; then
+    /sbin/initqueue --settled --unique /sbin/iso-scan "$isofile"
+fi

modules.d/90kernel-modules/module-setup.sh

@@ -35,15 +35,22 @@ installkernel() {
             return 0
         }
 
-        hostonly='' instmods sr_mod sd_mod scsi_dh scsi_dh_rdac scsi_dh_emc ata_piix \
-            pcmcia firewire-ohci yenta_socket \
-            usb_storage sdhci sdhci-pci \
-            sdhci_esdhc_imx mmci sdhci_tegra mvsdio \
-            omap omapdrm omap_hsmmc sdhci_dove ahci_platform pata_imx sata_mv \
-            atkbd i8042 usbhid hid-apple hid-sunplus hid-cherry hid-logitech \
-            hid-logitech-dj hid-microsoft ehci-hcd ohci-hcd uhci-hcd xhci-hcd hid_generic \
+        hostonly='' instmods sr_mod sd_mod scsi_dh ata_piix \
+            ehci-hcd ehci-pci ehci-platform ohci-hcd uhci-hcd xhci-hcd hid_generic \
             unix
 
+        instmods yenta_socket scsi_dh_rdac scsi_dh_emc \
+            atkbd i8042 usbhid hid-apple hid-sunplus hid-cherry hid-logitech \
+            hid-logitech-dj hid-microsoft firewire-ohci \
+            pcmcia usb_storage nvme hid-hyperv hv-vmbus
+
+        if [[ "$(uname -p)" == arm* ]]; then
+            # arm specific modules
+            hostonly='' instmods sdhci_esdhc_imx mmci sdhci_tegra mvsdio omap omapdrm \
+                omap_hsmmc panel-tfp410 sdhci_dove ahci_platform pata_imx sata_mv \
+                ehci-tegra
+        fi
+
         # install virtual machine support
         instmods virtio virtio_blk virtio_ring virtio_pci virtio_scsi \
             "=drivers/pcmcia" =ide "=drivers/usb/storage"
@@ -54,23 +61,23 @@ installkernel() {
         # if the required list is not set via the filesystems variable
         if ! [[ $hostonly ]]; then
             if [[ -z $filesystems ]]; then
-                omit_drivers="${omit_drivers}|kernel/fs/nfs|kernel/fs/nfsd|kernel/fs/lockd" \
-                    omit_drivers="${omit_drivers##|}" \
+                silent_omit_drivers="kernel/fs/nfs|kernel/fs/nfsd|kernel/fs/lockd" \
                     instmods '=fs'
             fi
         else
-            inst_fs() {
-                [[ $2 ]] || return 1
-                hostonly='' instmods $2
-            }
-            for_each_host_dev_fs inst_fs
+            for i in $(host_fs_all); do
+                hostonly='' instmods $i
+            done
         fi
     fi
+    :
 }
 
 install() {
-    dracut_install -o /lib/modprobe.d/*.conf
-    [[ $hostonly ]] && dracut_install -o /etc/modprobe.d/*.conf /etc/modprobe.conf
-    inst_hook cmdline 01 "$moddir/parse-kernel.sh"
+    inst_multiple -o /lib/modprobe.d/*.conf
+    [[ $hostonly ]] && inst_multiple -o /etc/modprobe.d/*.conf /etc/modprobe.conf
+    if ! dracut_module_included "systemd"; then
+        inst_hook cmdline 01 "$moddir/parse-kernel.sh"
+    fi
     inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
 }

modules.d/90livenet/module-setup.sh

@@ -14,5 +14,6 @@ install() {
     inst_hook cmdline 29 "$moddir/parse-livenet.sh"
     inst_hook initqueue/online 95 "$moddir/fetch-liveupdate.sh"
     inst_script "$moddir/livenetroot.sh" "/sbin/livenetroot"
+    dracut_need_initqueue
 }
 

modules.d/90livenet/parse-livenet.sh

@@ -11,7 +11,6 @@ if [ -n "$updates" ]; then
     # make sure network comes up even if we're doing a local live device
     if [ -z "$netroot" ]; then
 	echo > /tmp/net.ifaces
-	unset CMDLINE
     fi
     echo "$updates" > /tmp/liveupdates.info
     echo '[ -e /tmp/liveupdates.done ]' > \

modules.d/90lvm/lvm_scan.sh

@@ -108,9 +108,9 @@ if [ -n "$LVS" ] ; then
     info "Scanning devices $lvmdevs for LVM logical volumes $LVS"
     lvm lvscan --ignorelockingfailure 2>&1 | vinfo
     if [ -z "$sysinit" ]; then
-        lvm lvchange -ay --ignorelockingfailure $nopoll --ignoremonitoring $LVS 2>&1 | vinfo
+        lvm lvchange --yes -ay --ignorelockingfailure $nopoll --ignoremonitoring $LVS 2>&1 | vinfo
     else
-        lvm lvchange -ay $sysinit $LVS 2>&1 | vinfo
+        lvm lvchange --yes -ay $sysinit $LVS 2>&1 | vinfo
     fi
 fi
 
@@ -125,7 +125,7 @@ if [ -z "$LVS" -o -n "$VGS" ]; then
 fi
 
 if [ "$lvmwritten" ]; then
-    rm -f /etc/lvm/lvm.conf
+    rm -f -- /etc/lvm/lvm.conf
 fi
 unset lvmwritten
 

modules.d/90lvm/module-setup.sh

@@ -3,26 +3,14 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 check() {
-    local _rootdev _activated
     # No point trying to support lvm if the binaries are missing
     type -P lvm >/dev/null || return 1
 
-    check_lvm() {
-        local DM_VG_NAME DM_LV_NAME DM_UDEV_DISABLE_DISK_RULES_FLAG
-        eval $(udevadm info --query=property --name=/dev/block/$1|egrep '(DM_VG_NAME|DM_LV_NAME|DM_UDEV_DISABLE_DISK_RULES_FLAG)=')
-        [[ "$DM_UDEV_DISABLE_DISK_RULES_FLAG" = "1" ]] && return 1
-        [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 1
-        if ! strstr " ${_activated[*]} " " ${DM_VG_NAME}/${DM_LV_NAME} "; then
-            if ! [[ $kernel_only ]]; then
-                echo " rd.lvm.lv=${DM_VG_NAME}/${DM_LV_NAME} " >> "${initdir}/etc/cmdline.d/90lvm.conf"
-            fi
-            push _activated "${DM_VG_NAME}/${DM_LV_NAME}"
-        fi
-        return 0
-    }
-
     [[ $hostonly ]] || [[ $mount_needs ]] && {
-        for_each_host_dev_and_slaves check_lvm || return 1
+        for fs in "${host_fs_types[@]}"; do
+            [[ $fs = LVM*_member ]] && return 0
+        done
+        return 255
     }
 
     return 0
@@ -34,10 +22,44 @@ depends() {
     return 0
 }
 
+get_host_lvs() {
+    local _activated
+    declare -A _activated
+
+    for dev in "${!host_fs_types[@]}"; do
+        [ -e /sys/block/${dev#/dev/}/dm/name ] || continue
+        [ -e /sys/block/${dev#/dev/}/dm/uuid ] || continue
+        uuid=$(</sys/block/${dev#/dev/}/dm/uuid)
+        [[ "${uuid#LVM-}" == "$uuid" ]] && continue
+        dev=$(</sys/block/${dev#/dev/}/dm/name)
+        eval $(dmsetup splitname --nameprefixes --noheadings --rows "$dev" 2>/dev/null)
+        [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 1
+        if ! [[ ${_activated[${DM_VG_NAME}/${DM_LV_NAME}]} ]]; then
+            printf "%s\n" "${DM_VG_NAME}/${DM_LV_NAME} "
+            _activated["${DM_VG_NAME}/${DM_LV_NAME}"]=1
+        fi
+    done
+}
+
+cmdline() {
+    get_host_lvs | while read line; do
+        printf " rd.lvm.lv=$line"
+    done
+}
+
 install() {
-    local _i
+    local _i _needthin
+
     inst lvm
 
+    get_host_lvs | while read line; do
+        printf "%s" " rd.lvm.lv=$line"
+        if ! [[ $_needthin ]]; then
+            [[ "$(lvs --noheadings -o segtype ${line%%/*} 2>/dev/null)" == *thin* ]] && _needthin=1
+        fi
+    done >> "${initdir}/etc/cmdline.d/90lvm.conf"
+    echo >> "${initdir}/etc/cmdline.d/90lvm.conf"
+
     inst_rules "$moddir/64-lvm.rules"
 
     if [[ $hostonly ]] || [[ $lvmconf = "yes" ]]; then
@@ -50,14 +72,31 @@ install() {
         fi
     fi
 
-    inst_rules 11-dm-lvm.rules
+    if ! [[ -e ${initdir}/etc/lvm/lvm.conf ]]; then
+        mkdir -p "${initdir}/etc/lvm"
+        {
+            echo 'global {'
+            echo 'locking_type = 4'
+            echo 'use_lvmetad = 0'
+            echo '}'
+        } > "${initdir}/etc/lvm/lvm.conf"
+    fi
+
+    inst_rules 11-dm-lvm.rules 69-dm-lvm-metad.rules
     # Gentoo ebuild for LVM2 prior to 2.02.63-r1 doesn't install above rules
     # files, but provides the one below:
     inst_rules 64-device-mapper.rules
+    # debian udev rules
+    inst_rules 56-lvm.rules 60-persistent-storage-lvm.rules
 
     inst_script "$moddir/lvm_scan.sh" /sbin/lvm_scan
     inst_hook cmdline 30 "$moddir/parse-lvm.sh"
 
     inst_libdir_file "libdevmapper-event-lvm*.so"
+
+    if [[ $_needthin ]]; then
+        inst_multiple -o thin_dump thin_restore thin_check thin_repair
+    fi
+
 }