NEWS: update for 037

https://bugzilla.redhat.com/show_bug.cgi?id=949697

.mailmap

@@ -13,3 +13,4 @@ Luca Berra <bluca@vodka.it> 			<bluca@comedia.it>
 Dave Young <dyoung@redhat.com>	 		dyoung@redhat.com
 Frederick Grose <fgrose@sugarlabs.org> 		<fgrose@gmail.com>
 Frederic Crozat <fcrozat@suse.com> 		<fcrozat@mandriva.com>
+Shawn W Dunn <sfalken@opensuse.org> 		<sfalken@opensuse.org>

50-dracut.install

@@ -22,7 +22,7 @@ done
 ret=0
 case "$1" in
     add)
-	dracut ${noimageifnotneeded+--noimageifnotneeded} "$3"/initrd "$2"
+	dracut ${noimageifnotneeded:+--noimageifnotneeded} "$3"/initrd "$2"
         ret=$?
 	;;
     remove)

51-dracut-rescue.install

@@ -6,6 +6,9 @@ export LANG=C
 
 COMMAND="$1"
 KERNEL_VERSION="$2"
+BOOT_DIR_ABS="${3%/*}/0-rescue"
+KERNEL_IMAGE="$4"
+
 
 dropindirs_sort()
 {
@@ -50,7 +53,6 @@ fi
 
 LOADER_ENTRY="/boot/loader/entries/${MACHINE_ID}-0-rescue.conf"
 BOOT_DIR="/${MACHINE_ID}/0-rescue"
-BOOT_DIR_ABS="/boot${BOOT_DIR}"
 
 ret=0
 

AUTHORS

@@ -5,33 +5,38 @@ Will Woods <wwoods@redhat.com>
 Philippe Seewer <philippe.seewer@bfh.ch>
 Warren Togami <wtogami@redhat.com>
 Jeremy Katz <katzj@redhat.com>
-David Dillow <dave@thedillows.org>
 Dave Young <dyoung@redhat.com>
+David Dillow <dave@thedillows.org>
 Michal Soltys <soltys@ziu.info>
 Amerigo Wang <amwang@redhat.com>
 Colin Guthrie <colin@mageia.org>
 Andrey Borzenkov <arvidjaar@gmail.com>
 Peter Jones <pjones@redhat.com>
+WANG Chao <chaowang@redhat.com>
 Andreas Thienemann <andreas@bawue.net>
+Hannes Reinecke <hare@suse.de>
 Hans de Goede <hdegoede@redhat.com>
 John Reiser <jreiser@bitwagon.com>
 Luca Berra <bluca@vodka.it>
+Thomas Renninger <trenn@suse.de>
+Alexander Tsoy <alexander@tsoy.me>
 Daniel Drake <dsd@laptop.org>
-Dan Horák <dhorak@redhat.com>
-WANG Chao <chaowang@redhat.com>
-Leho Kraav <leho@kraav.com>
-Baoquan He <bhe@redhat.com>
 Brian C. Lane <bcl@redhat.com>
+Dan Horák <dhorak@redhat.com>
+Baoquan He <bhe@redhat.com>
+Leho Kraav <leho@kraav.com>
 Kamil Rytarowski <n54@gmx.com>
 Marc Grimme <grimme@atix.de>
+Peter Rajnoha <prajnoha@redhat.com>
 Chao Wang <chaowang@redhat.com>
+Colin Walters <walters@verbum.org>
 Frederic Crozat <fcrozat@suse.com>
 Jesse Keating <jkeating@redhat.com>
 Milan Broz <mbroz@redhat.com>
+Radek Vykydal <rvykydal@redhat.com>
 Roberto Sassu <roberto.sassu@polito.it>
 Anton Blanchard <anton@samba.org>
 Bill Nottingham <notting@redhat.com>
-Colin Walters <walters@verbum.org>
 David Cantrell <dcantrell@redhat.com>
 Dennis Gilmore <dennis@ausil.us>
 Jon Ander Hernandez <jonan.h@gmail.com>
@@ -39,20 +44,23 @@ Juan RP <xtraeme@gmail.com>
 Lance Albertson <lance@osuosl.org>
 Marian Ganisin <mganisin@redhat.com>
 Michael Ploujnikov <plouj@somanetworks.com>
-Peter Rajnoha <prajnoha@redhat.com>
-Radek Vykydal <rvykydal@redhat.com>
+Stig Telfer <stelfer@cray.com>
 Wim Muskee <wimmuskee@gmail.com>
 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
 Alan Pevec <apevec@redhat.com>
+Cristian Rodríguez <crrodriguez@opensuse.org>
 Frederick Grose <fgrose@sugarlabs.org>
 Ian Dall <ian@beware.dropbear.id.au>
 James Buren <ryuo@frugalware.org>
+James Lee <jlee@thestaticvoid.com>
 Joey Boggs <jboggs@redhat.com>
+Koen Kooi <koen@dominion.thruhere.net>
 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 Mike Snitzer <snitzer@redhat.com>
 Przemysław Rudy <prudy1@o2.pl>
 Stefan Reimer <it@startux.de>
 Thomas Lange <lange@informatik.uni-koeln.de>
+Till Maas <opensource@till.name>
 Vivek Goyal <vgoyal@redhat.com>
 Vladislav Bogdanov <bubble@hoster-ok.com>
 Adam Williamson <awilliam@redhat.com>
@@ -64,22 +72,25 @@ Canek Peláez Valdés <caneko@gmail.com>
 Chris Leech <cleech@redhat.com>
 Christian Heinz <christian.ch.heinz@gmail.com>
 Cong Wang <amwang@redhat.com>
+Daniel Schaal <farbing@web.de>
 Dave Jones <davej@redhat.com>
 Dave Young <dave@redhat.com>
 Dennis Schridde <devurandom@gmx.net>
 Duane Griffin <duaneg@dghda.com>
 Glen Gray <slaine@slaine.org>
+Hari Bathini <hbathini@linux.vnet.ibm.com>
 Hermann Gausterer <git-dracut-2012@mrq1.org>
 James Laska <jlaska@redhat.com>
-James Lee <jlee@thestaticvoid.com>
 Jan Stodola <jstodola@redhat.com>
 Jiri Pirko <jiri@resnulli.us>
 Joe Lawrence <Joe.Lawrence@stratus.com>
 Kevin Yung <Kevin.Yung@myob.com>
+Kyle McMartin <kmcmarti@redhat.com>
 Kyle McMartin <kyle@redhat.com>
 Lars R. Damerow <lars@pixar.com>
 Lennert Buytenhek <buytenh@wantstofly.org>
 Lubomir Rintel <lkundrak@v3.sk>
+Marian Csontos <mcsontos@redhat.com>
 Matt <smoothsailing72@hotmail.com>
 Matt Smith <shadowfax@gmx.com>
 Michal Schmidt <mschmidt@redhat.com>
@@ -88,17 +99,20 @@ Munehiro Matsuda <haro@kgt.co.jp>
 Nicolas Chauvet <kwizart@gmail.com>
 Nikoli <nikoli@lavabit.com>
 Olivier Blin <dev@blino.org>
+P J P <ppandit@redhat.com>
 Paolo Bonzini <pbonzini@redhat.com>
 Peter Robinson <pbrobinson@fedoraproject.org>
 Pádraig Brady <P@draigBrady.com>
 Quentin Armitage <quentin@armitage.org.uk>
 Robert Buchholz <rbu@goodpoint.de>
 Sergey Fionov <fionov@gmail.com>
+Shawn W Dunn <sfalken@opensuse.org>
 Srinivasa T N <seenutn@linux.vnet.ibm.com>
 Thilo Bangert <thilo.bangert@gmx.net>
 Thomas Backlund <tmb@mageia.org>
 Tomasz Torcz <tomek@pipebreaker.pl>
 Vadim Kuznetsov <vadimk@gentoo.org>
 Ville Skyttä <ville.skytta@iki.fi>
+Vratislav Podzimek <vpodzime@redhat.com>
 Yanko Kaneti <yaneti@declera.com>
 maximilian attems <max@stro.at>

Makefile

@@ -21,11 +21,13 @@ man1pages = lsinitrd.1
 man5pages = dracut.conf.5
 
 man7pages = dracut.cmdline.7 \
-            dracut.bootup.7
+            dracut.bootup.7 \
+            dracut.modules.7
 
 man8pages = dracut.8 \
             dracut-catimages.8 \
             mkinitrd.8 \
+            mkinitrd-suse.8 \
             modules.d/98systemd/dracut-cmdline.service.8 \
             modules.d/98systemd/dracut-initqueue.service.8 \
             modules.d/98systemd/dracut-mount.service.8 \
@@ -37,15 +39,15 @@ man8pages = dracut.8 \
 
 manpages = $(man1pages) $(man5pages) $(man7pages) $(man8pages)
 
-
 .PHONY: install clean archive rpm testimage test all check AUTHORS doc dracut-version.sh
 
-all: dracut-version.sh dracut-install
+all: dracut-version.sh dracut-install skipcpio/skipcpio
 
 DRACUT_INSTALL_OBJECTS = \
         install/dracut-install.o \
         install/hashmap.o\
         install/log.o \
+        install/strv.o \
         install/util.o
 
 # deps generated with gcc -MM
@@ -55,14 +57,22 @@ install/hashmap.o: install/hashmap.c install/util.h install/macro.h install/log.
 	install/hashmap.h
 install/log.o: install/log.c install/log.h install/macro.h install/util.h
 install/util.o: install/util.c install/util.h install/macro.h install/log.h
+install/strv.o: install/strv.c install/strv.h install/util.h install/macro.h install/log.h
 
 install/dracut-install: $(DRACUT_INSTALL_OBJECTS)
 
 dracut-install: install/dracut-install
 	ln -fs $< $@
 
+SKIPCPIO_OBJECTS= \
+	skipcpio/skipcpio.o
+
+skipcpio/skipcpio.o: skipcpio/skipcpio.c
+skipcpio/skipcpio: skipcpio/skipcpio.o
+
 indent:
 	indent -i8 -nut -br -linux -l120 install/dracut-install.c
+	indent -i8 -nut -br -linux -l120 skipcpio/skipcpio.c
 
 doc: $(manpages) dracut.html
 
@@ -76,11 +86,13 @@ endif
 %.xml: %.asc
 	asciidoc -d manpage -b docbook -o $@ $<
 
-dracut.html: dracut.asc $(manpages)
+dracut.8: dracut.usage.asc dracut.8.asc
+
+dracut.html: dracut.asc $(manpages) dracut.css dracut.usage.asc
 	asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc
 	xsltproc -o dracut.html --xinclude -nonet \
-		--stringparam html.stylesheet \
-		http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \
+		--stringparam custom.css.source dracut.css \
+		--stringparam generate.css.header 1 \
 		http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
 	rm -f -- dracut.xml
 
@@ -134,6 +146,9 @@ endif
 	if [ -f install/dracut-install ]; then \
 		install -m 0755 install/dracut-install $(DESTDIR)$(pkglibdir)/dracut-install; \
 	fi
+	if [ -f skipcpio/skipcpio ]; then \
+		install -m 0755 skipcpio/skipcpio $(DESTDIR)$(pkglibdir)/skipcpio; \
+	fi
 	mkdir -p $(DESTDIR)${prefix}/lib/kernel/install.d
 	install -m 0755 50-dracut.install $(DESTDIR)${prefix}/lib/kernel/install.d/50-dracut.install
 	install -m 0755 51-dracut-rescue.install $(DESTDIR)${prefix}/lib/kernel/install.d/51-dracut-rescue.install
@@ -150,27 +165,28 @@ clean:
 	$(RM) */*/*~
 	$(RM) $(manpages:%=%.xml) dracut.xml
 	$(RM) test-*.img
-	$(RM) dracut-*.rpm dracut-*.tar.bz2
+	$(RM) dracut-*.rpm dracut-*.tar.bz2 dracut-*.tar.xz
 	$(RM) dracut-version.sh
 	$(RM) dracut-install install/dracut-install $(DRACUT_INSTALL_OBJECTS)
+	$(RM) skipcpio/skipcpio $(SKIPCPIO_OBJECTS)
 	$(RM) $(manpages) dracut.html
 	$(MAKE) -C test clean
 
-dist: dracut-$(VERSION).tar.bz2
+dist: dracut-$(VERSION).tar.xz
 
-dracut-$(VERSION).tar.bz2: doc
+dracut-$(VERSION).tar.xz: doc syncheck
 	@echo "DRACUT_VERSION=$(VERSION)" > dracut-version.sh
 	git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ > dracut-$(VERSION).tar
 	mkdir -p dracut-$(VERSION)
 	for i in $(manpages) dracut.html dracut-version.sh; do [ "$${i%/*}" != "$$i" ] && mkdir -p "dracut-$(VERSION)/$${i%/*}"; cp "$$i" "dracut-$(VERSION)/$$i"; done
 	tar --owner=root --group=root -rf dracut-$(VERSION).tar $$(find dracut-$(VERSION) -type f)
-	rm -fr -- dracut-$(VERSION).tar.bz2 dracut-$(VERSION)
-	bzip2 -9 dracut-$(VERSION).tar
+	rm -fr -- dracut-$(VERSION).tar.xz dracut-$(VERSION)
+	xz -9 dracut-$(VERSION).tar
 	rm -f -- dracut-$(VERSION).tar
 
-rpm: dracut-$(VERSION).tar.bz2
+rpm: dracut-$(VERSION).tar.xz syncheck
 	rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
-	cp dracut-$(VERSION).tar.bz2 "$$rpmbuild"; \
+	cp dracut-$(VERSION).tar.xz "$$rpmbuild"; \
 	LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
 	(cd "$$rpmbuild"; rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
 	        --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
@@ -204,15 +220,15 @@ testimages: all
 	@echo wrote  test-dracut.img
 
 hostimage: all
-	./dracut.sh -H -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	./dracut.sh -H -l -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img
 
 AUTHORS:
 	git shortlog  --numbered --summary -e |while read a rest; do echo $$rest;done > AUTHORS
 
-dracut.html.sign: dracut-$(VERSION).tar.bz2
-	gpg-sign-all dracut-$(VERSION).tar.bz2 dracut.html
+dracut.html.sign: dracut-$(VERSION).tar.xz dracut.html
+	gpg-sign-all dracut-$(VERSION).tar.xz dracut.html
 
 upload: dracut.html.sign
-	kup put dracut-$(VERSION).tar.bz2 dracut-$(VERSION).tar.sign /pub/linux/utils/boot/dracut/
+	kup put dracut-$(VERSION).tar.xz dracut-$(VERSION).tar.sign /pub/linux/utils/boot/dracut/
 	kup put dracut.html dracut.html.sign /pub/linux/utils/boot/dracut/

NEWS

@@ -1,3 +1,169 @@
+dracut-037
+==========
+- dracut: hostonly_cmdline variable and command line switch
+    Toggle hostonly cmdline storing in the initramfs
+    --hostonly-cmdline:
+        Store kernel command line arguments needed in the initramfs
+    --no-hostonly-cmdline:
+        Do not store kernel command line arguments needed in the initramfs
+- dracut: --mount now understands full fstab lines
+- dracut now also includes drivers from the /lib/modules/<version>/updates directory
+- dracut: only set the owner of files to 0:0, if generated as non-root
+- dracut now directly writes to the initramfs file
+- dracut: call lz4 with the legacy flag (linux kernel does not support the new format)
+- systemd: rootfs-generator generates JobTimeout=0 units for the root device
+- systemd: added the systemd-sysctl service
+- systemd: add 80-net-setup-link.rules and .link files for persistent interface renaming
+- systemd: make dracut-shutdown.service failure non-fatal
+- network: various IPv6 fixes
+- network: DCHCP for IPv6
+- network: understand ip=.....:<dns1>:<dns2>
+- network: parse ibft nameserver settings
+- shutdown: if kexec fails, just reboot
+- lvm: handle one LV at a time with lvchange
+- module-setup.sh:
+    New functions require_binaries() and require_any_binary() to be used
+    in the check() section of module-setup.sh.
+- a lot of small bugfixes
+
+Contributions from:
+Harald Hoyer
+Alexander Tsoy
+Till Maas
+Amadeusz Żołnowski
+Brian C. Lane
+Colin Guthrie
+Dave Young
+WANG Chao
+Shawn W Dunn
+
+dracut-036
+==========
+- fixed skipcpio signature checking
+
+dracut-035
+==========
+- changed dracut tarball compression to xz
+- new argument "--rebuild"
+- add lzo, lz4 compression
+- install: install all binaries with <name> found in PATH
+- lsinitrd can now handle initramfs images with an early cpio prepended
+  (microcode, ACPI tables)
+- mkinitrd-suse added as a compat stub for dracut
+- lvm: install thin utils for non-hostonly
+- resume: fix swap detection in hostonly
+- avoid loading unnecessary 32-bit libraries for 64-bit initrds
+- crypt: wait for systemd password agents
+- crypt: skip crypt swaps with password files
+- network: before doing dhcp, dracut now checks, if the link has a carrier
+- network: dhclient-script.sh now sets the lease time
+- network: include usbnet drivers
+- network: include all ethernet drivers
+- network: add rd.bootif=0 to ignore BOOTIF
+- i18n: introduce i18n_install_all, to install everything i18n related
+- support SuSE DASD configurations
+- support SuSE zfcp configurations
+- support SuSE compressed KEYMAP= setting
+- usrmount: always install the module,
+  so always mount /usr from within the initramfs
+- test/TEST-17-LVM-THIN: new test case for lvm thin pools
+- "halt" the machine in systemd mode for die()
+
+dracut-034
+==========
+- do not run dhcp on parts of assembled network interfaces (bond, bridge)
+- add option to turn on/off prelinking
+    --prelink, --noprelink
+    do_prelink=[yes|no]
+- add ACPI table overriding
+- do not log to syslog/kmsg/journal for UID != 0
+- lvm/mdraid: Fix LVM on MD activation
+- bcache module removed (now in bcache-tools upstream)
+- mdadm: also install configs from /etc/mdadm.conf.d
+- fixes for mdadm-3.2.6+
+- mkinitrd: better compat support for SUSE
+- fcoe: add FCoE UEFI boot device support
+- rootfs-block: add support for the rootfallback= kernel cmdline option
+
+Contributions from:
+Thomas Renninger
+Alexander Tsoy
+Peter Rajnoha
+WANG Chao
+Harald Hoyer
+
+
+dracut-033
+==========
+- improved hostonly device recognition
+- improved hostonly module recognition
+- add dracut.css for dracut.html
+- do not install udev rules from /etc in generic mode
+- fixed LABEL= parsing for swap devices
+- fixed iBFT network setup
+- url-lib.sh: handle 0-size files with curl
+- dracut.asc: document debugging dracut on shutdown
+- if rd.md=0, use dmraid for imsm and ddf
+- skip empty dracut modules
+- removed caching of kernel cmdline
+- fixed iso-scan, if the loop device driver is a kernel module
+- bcache: support new blkid
+- fixed ifup udev rules
+- ifup with dhcp, if no "ip=" specified for the interface
+
+Contributions from:
+WANG Chao
+Colin Walters
+Harald Hoyer
+
+
+dracut-032
+==========
+- add parameter --print-cmdline
+    This prints the kernel command line parameters for the current disk
+    layout.
+    $ dracut --print-cmdline
+    rd.luks.uuid=luks-e68c8906-6542-4a26-83c4-91b4dd9f0471
+    rd.lvm.lv=debian/root rd.lvm.lv=debian/usr root=/dev/mapper/debian-root
+    rootflags=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered
+    rootfstype=ext4
+- dracut.sh: add --persistent-policy option and persistent_policy conf option
+    --persistent-policy <policy>:
+        Use <policy> to address disks and partitions.
+        <policy> can be any directory name found in /dev/disk.
+        E.g. "by-uuid", "by-label"
+- dracut now creates the initramfs without udevadm
+  that means the udev database does not have to populated
+  and the initramfs can be built in a chroot with
+  /sys /dev /proc mounted
+- renamed dracut_install() to inst_multiple() for consistent naming
+- if $libdirs is unset, fall back to ld.so.cache paths
+- always assemble /usr device in initramfs
+- bash module added (disable it, if you really want dash)
+- continue to boot, if the main loop times out, in systemd mode
+- removed inst*() shell pure versions, dracut-install binary is in charge now
+- fixed ifcfg file generation for vlan
+- do not include adjtime and localtime anymore
+- fixed generation of zfcp.conf of CMS setups
+- install vt102 terminfo
+  dracut_install() is still there for backwards compat
+- do not strip files in FIPS mode
+- fixed iBFT interface configuration
+- fs-lib: install fsck and fsck.ext*
+- shutdown: fixed killall_proc_mountpoint()
+- network: also wait for ethernet interfaces to setup
+- fixed checking for FIPS mode
+
+Contributions from:
+Harald Hoyer
+WANG Chao
+Baoquan He
+Daniel Schaal
+Dave Young
+James Lee
+Radek Vykydal
+
+
 dracut-031
 ==========
 - do not include the resume dracut module in hostonly mode,

TODO

@@ -6,6 +6,10 @@ Items are ordered in priority.
 
 INITRAMFS TODO
 
+- allow dual stack configuration (IPv4, IPv6) for the same interface
+- "bind-mount" kernel drivers in real root for the rescue image,
+  if the real root does not have any kernel modules for this kernel
+  https://bugzilla.redhat.com/show_bug.cgi?id=1046510
 - use info and warn prefix
 - generate systemd unit dracut-initramfs-restore in /run/systemd dynamically
 - put "root=" parsing hooks in separate hook dir
@@ -22,6 +26,7 @@ INITRAMFS TODO
 
 GENERATOR TODO
 
+- report errors on missing files in check()
 - remove wait for swap devs, if no "resume=" is given on the kernel command line
 - add presets (predefined set of modules)
 - add interpreter/plugin-scripts to be sourced at the beginning or end (can use dracut-functions)

dracut-bash-completion.sh

@@ -1,4 +1,4 @@
-#!/bin/bash
+#
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 #
@@ -34,13 +34,13 @@ _dracut() {
                               --local --hostonly --no-hostonly --fstab --help --bzip2 --lzma
                               --xz --no-compress --gzip --list-modules --show-modules --keep
                               --printsize --regenerate-all --noimageifnotneeded --early-microcode
-                              --no-early-microcode'
+                              --no-early-microcode --print-cmdline --prelink --noprelink'
 
                        [ARG]='-a -m -o -d -I -k -c -L --kver --add --force-add --add-drivers
                               --omit-drivers --modules --omit --drivers --filesystems --install
                               --fwdir --libdirs --fscks --add-fstab --mount --device --nofscks
                               --kmoddir --conf --confdir --tmpdir --stdlog --compress --prefix
-                              --kernel-cmdline --sshkey'
+                              --kernel-cmdline --sshkey --persistent-policy'
         )
 
         if __contains_word "$prev" ${OPTS[ARG]}; then
@@ -56,6 +56,9 @@ _dracut() {
                         -a|-m|-o|--add|--modules|--omit)
                                 comps=$(dracut --list-modules 2>/dev/null)
                         ;;
+                        --persistent-policy)
+                                comps=$(cd /dev/disk/; echo *)
+                        ;;
                         --kver)
                                 comps=$(cd /lib/modules; echo [0-9]*)
                         ;;

dracut-initramfs-restore.sh

@@ -20,6 +20,8 @@ if zcat "$IMG"  | cpio -id --quiet >/dev/null; then
     rm -f -- .need_shutdown
 elif xzcat "$IMG"  | cpio -id --quiet >/dev/null; then
     rm -f -- .need_shutdown
+elif lz4 -d -c "$IMG"  | cpio -id --quiet >/dev/null; then
+    rm -f -- .need_shutdown
 else
     # something failed, so we clean up
     echo "Unpacking of $IMG to /run/initramfs failed" >&2

dracut-logger.sh

@@ -140,16 +140,25 @@ dlog_init() {
         fi
     fi
 
+    if (( $UID  != 0 )); then
+        kmsgloglvl=0
+        sysloglvl=0
+    fi
+
     if (( $sysloglvl > 0 )); then
-        if [[ -d /run/systemd/journal ]] && type -P systemd-cat &>/dev/null && (( $UID  == 0 )) ; then
+        if [[ -d /run/systemd/journal ]] \
+            && type -P systemd-cat &>/dev/null \
+            && systemctl --quiet is-active systemd-journald.socket &>/dev/null \
+            && { echo "dracut-$DRACUT_VERSION" | systemd-cat -t 'dracut' &>/dev/null; } ; then
             readonly _dlogdir="$(mktemp --tmpdir="$TMPDIR/" -d -t dracut-log.XXXXXX)"
             readonly _systemdcatfile="$_dlogdir/systemd-cat"
             mkfifo "$_systemdcatfile"
             readonly _dlogfd=15
-            systemd-cat -t 'dracut' <"$_systemdcatfile" &
+            systemd-cat -t 'dracut' --level-prefix=true <"$_systemdcatfile" &
             exec 15>"$_systemdcatfile"
         elif ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null; then
             # We cannot log to syslog, so turn this facility off.
+            kmsgloglvl=$sysloglvl
             sysloglvl=0
             ret=1
             errmsg="No '/dev/log' or 'logger' included for syslog logging"
@@ -173,34 +182,34 @@ dlog_init() {
     export maxloglvl
 
 
-    if (($stdloglvl < 6)) && (($kmsgloglvl < 6)) && (($fileloglvl < 6)); then
+    if (($stdloglvl < 6)) && (($kmsgloglvl < 6)) && (($fileloglvl < 6)) && (($sysloglvl < 6)); then
         unset dtrace
         dtrace() { :; };
     fi
 
-    if (($stdloglvl < 5)) && (($kmsgloglvl < 5)) && (($fileloglvl < 5)); then
+    if (($stdloglvl < 5)) && (($kmsgloglvl < 5)) && (($fileloglvl < 5)) && (($sysloglvl < 5)); then
         unset ddebug
         ddebug() { :; };
     fi
 
-    if (($stdloglvl < 4)) && (($kmsgloglvl < 4)) && (($fileloglvl < 4)); then
+    if (($stdloglvl < 4)) && (($kmsgloglvl < 4)) && (($fileloglvl < 4)) && (($sysloglvl < 4)); then
         unset dinfo
         dinfo() { :; };
     fi
 
-    if (($stdloglvl < 3)) && (($kmsgloglvl < 3)) && (($fileloglvl < 3)); then
+    if (($stdloglvl < 3)) && (($kmsgloglvl < 3)) && (($fileloglvl < 3)) && (($sysloglvl < 3)); then
         unset dwarn
         dwarn() { :; };
         unset dwarning
         dwarning() { :; };
     fi
 
-    if (($stdloglvl < 2)) && (($kmsgloglvl < 2)) && (($fileloglvl < 2)); then
+    if (($stdloglvl < 2)) && (($kmsgloglvl < 2)) && (($fileloglvl < 2)) && (($sysloglvl < 2)); then
         unset derror
         derror() { :; };
     fi
 
-    if (($stdloglvl < 1)) && (($kmsgloglvl < 1)) && (($fileloglvl < 1)); then
+    if (($stdloglvl < 1)) && (($kmsgloglvl < 1)) && (($fileloglvl < 1)) && (($sysloglvl < 1)); then
         unset dfatal
         dfatal() { :; };
     fi
@@ -321,9 +330,9 @@ _do_dlog() {
 
     if (( $lvl <= $sysloglvl )); then
         if [[ "$_dlogfd" ]]; then
-            echo "<$(_dlvl2syslvl $lvl)>$msg" >&$_dlogfd
+            printf -- "<%s>%s\n" "$(($(_dlvl2syslvl $lvl) & 7))" "$msg" >&$_dlogfd
         else
-            logger -t "dracut[$$]" -p $(_lvl2syspri $lvl) "$msg"
+            logger -t "dracut[$$]" -p $(_lvl2syspri $lvl) -- "$msg"
         fi
     fi
 

dracut.8.asc

@@ -10,7 +10,7 @@ dracut - low-level tool for generating an initramfs image
 
 SYNOPSIS
 --------
-*dracut* ['OPTION...'] [<image> [_<kernel version>_]]
+*dracut* [__OPTION...__] [__<image>__ [__<kernel version>__]]
 
 DESCRIPTION
 -----------
@@ -33,57 +33,14 @@ For a complete list of kernel command line options see *dracut.cmdline*(7).
 If you are dropped to an emergency shell, while booting your initramfs,
 the file _/run/initramfs/rdsosreport.txt_ is created, which can be safed to a
 (to be mounted by hand) partition (usually /boot) or a USB stick.
-Additional debugging info can be produced by adding **rd.debug** to the kernel command line.
-_/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools.
-It should be attached to any report about dracut problems.
+Additional debugging info can be produced by adding **rd.debug** to the kernel
+command line. _/run/initramfs/rdsosreport.txt_ contains all logs and the output
+of some tools. It should be attached to any report about dracut problems.
 
-EXAMPLE
--------
-
-To create a initramfs image, the most simple command is:
-----
-# dracut
-----
-
-This will generate a general purpose initramfs image, with all possible
-functionality resulting of the combination of the installed dracut modules and
-system tools. The image is /boot/initramfs-_++<kernel version>++_.img and
-contains the kernel modules of the currently active kernel with version
-_++<kernel version>++_.
-
-If the initramfs image already exists, dracut will display an error message, and
-to overwrite the existing image, you have to use the --force option.
-----
-# dracut --force
-----
-
-If you want to specify another filename for the resulting image you would issue
-a command like:
-----
-# dracut foobar.img
-----
-
-To generate an image for a specific kernel version, the command would be:
-----
-# dracut foobar.img 2.6.40-1.rc5.f20
-----
-
-A shortcut to generate the image at the default location for a specific kernel
-version is:
-----
-# dracut --kver 2.6.40-1.rc5.f20
-----
-
-If you want to create lighter, smaller initramfs images, you may want to specify
-the --hostonly or -H option. Using this option, the resulting image will
-contain only those dracut modules, kernel modules and filesystems, which are
-needed to boot this specific machine. This has the drawback, that you can't put
-the disk on another controller or machine, and that you can't switch to another
-root filesystem, without recreating the initramfs image. The usage of the
---hostonly option is only for experts and you will have to keep the broken
-pieces. At least keep a copy of a general purpose image (and corresponding
-kernel) as a fallback to rescue your system.
+USAGE
+-----
 
+include::dracut.usage.asc[]
 
 OPTIONS
 -------
@@ -225,6 +182,15 @@ example:
 **--no-kernel**::
     do not install kernel drivers and firmware files
 
+**--early-microcode**::
+    Combine early microcode with ramdisk
+
+**--no-early-microcode**::
+    Do not combine early microcode with ramdisk
+
+**--print-cmdline**::
+    print the kernel command line for the current disk layout
+
 **--mdadmconf**::
     include local _/etc/mdadm.conf_
 
@@ -260,6 +226,12 @@ example:
 **--nostrip**::
     do not strip binaries in the initramfs
 
+**--prelink**::
+    prelink binaries in the initramfs (default)
+
+**--noprelink**::
+    do not prelink binaries in the initramfs
+
 **--hardlink**::
     hardlink files in the initramfs (default)
 
@@ -303,6 +275,12 @@ Default:
 
 **--sshkey** _<sshkey file>_:: ssh key file used with ssh-client module.
 
+**--logfile** _<logfile>_:: logfile to use; overrides any setting from
+    the configuration files.
++
+Default:
+    _/var/log/dracut.log_
+
 **-l, --local**::
     activates the local mode. dracut will use modules from the current working
     directory instead of the system-wide installed modules in
@@ -322,15 +300,30 @@ provide a valid _/etc/fstab_.
 **-N, --no-hostonly**::
     Disable Host-Only mode
 
+**--hostonly-cmdline**:
+    Store kernel command line arguments needed in the initramfs
+
+**--no-hostonly-cmdline**:
+    Do not store kernel command line arguments needed in the initramfs
+
+**--persistent-policy** _<policy>_::
+    Use _<policy>_ to address disks and partitions.
+    _<policy>_ can be any directory name found in /dev/disk.
+    E.g. "by-uuid", "by-label"
+
 **--fstab**::
     Use _/etc/fstab_ instead of _/proc/self/mountinfo_.
 
-**--add-fstab** _<filename>_ ::
+**--add-fstab** _<filename>_::
     Add entries of _<filename>_ to the initramfs /etc/fstab.
 
-**--mount** "_<device>_ _<mountpoint>_ _<filesystem type>_ _<filesystem options>_"::
-    Mount _<device>_ on _<mountpoint>_ with _<filesystem type>_ and _<filesystem
-    options>_ in the initramfs
+**--mount** "_<device>_ _<mountpoint>_ _<filesystem type>_ [_<filesystem options>_ [_<dump frequency>_ [_<fsck order>_]]]"::
+    Mount _<device>_ on _<mountpoint>_ with _<filesystem type>_ in the
+    initramfs. _<filesystem options>_, _<dump options>_ and _<fsck order>_ can
+    be specified, see fstab manpage for the details.
+    The default _<filesystem options>_ is "defaults".
+    The default _<dump frequency>_ is "0".
+    the default _<fsck order>_ is "2".
 
 **--add-device** _<device>_ ::
     Bring up _<device>_ in initramfs, _<device>_ should be the device name.
@@ -338,13 +331,13 @@ provide a valid _/etc/fstab_.
     LVM or an encrypted partition.
     [NB --device can be used for compatibility with earlier releases]
 
-**-i, --include** _<SOURCE>_ _<TARGET>_::
+**-i, --include** _<SOURCE>_ _<TARGET>_::
     include the files in the SOURCE directory into the
     TARGET directory in the final initramfs. If SOURCE is a file, it will be
     installed to TARGET in the final initramfs. This parameter can be specified
     multiple times.
 
-**-I, --install** _<file list>_::
+**-I, --install** _<file list>_::
     install the space separated list of files into the initramfs.
 +
 [NOTE]
@@ -385,7 +378,24 @@ will not be able to boot. Equivalent to "lzma --compress=lzma -9"
 [WARNING]
 ====
 Make sure your kernel has xz decompression support compiled in, otherwise you
-will not be able to boot. Equivalent to "lzma --compress=xz --check=crc32 --lzma2=dict=1MiB"
+will not be able to boot. Equivalent to
+"lzma --compress=xz --check=crc32 --lzma2=dict=1MiB"
+====
+
+**--lzo**::
+    Compress the generated initramfs using lzop.
+[WARNING]
+====
+Make sure your kernel has lzo decompression support compiled in, otherwise you
+will not be able to boot.
+====
+
+**--lz4**::
+    Compress the generated initramfs using lz4.
+[WARNING]
+====
+Make sure your kernel has lz4 decompression support compiled in, otherwise you
+will not be able to boot.
 ====
 
 **--compress** _<compressor>_::
@@ -430,8 +440,8 @@ will not be able to boot. Equivalent to "lzma --compress=xz --check=crc32 --lzma
 ----
 
 **--regenerate-all**::
-    Regenerate all initramfs images at the default location with the kernel versions found on the system.
-    Additional parameters are passed through.
+    Regenerate all initramfs images at the default location with the kernel
+    versions found on the system. Additional parameters are passed through.
 
 FILES
 -----
@@ -459,9 +469,10 @@ _/etc/conf.d/_::
     set in the configuration files.
 
 _/etc/cmdline_::
-    Can contain additional command line options. Deprecated, better use /etc/cmdline.d/*.conf.
+    Can contain additional command line options. Deprecated, better use
+    /etc/cmdline.d/*.conf.
 
-_/etc/cmdline.d/*.conf::
+_/etc/cmdline.d/*.conf_::
     Can contain additional command line options.
 
 AVAILABILITY

dracut.asc

@@ -1,7 +1,7 @@
 dracut
 ======
 Harald Hoyer <harald@redhat.com>
-v2.0, March 2011
+v3.0, October 2013
 
 :language: bash
 
@@ -125,12 +125,14 @@ started looks like <<dracutbootup7>>.
 
 == Dracut on shutdown
 
-On a systemd driven system, the dracut initramfs is also used for the shutdown procedure.
+On a systemd driven system, the dracut initramfs is also used for the shutdown
+procedure.
 
 The following steps are executed during a shutdown:
 
 * systemd switches to the shutdown.target
-* systemd starts /lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
+* systemd starts
+  /lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
 * dracut-shutdown.service executes /usr/lib/dracut/dracut-initramfs-restore
   which unpacks the initramfs to /run/initramfs
 * systemd finishes shutdown.target
@@ -138,918 +140,19 @@ The following steps are executed during a shutdown:
 * systemd tries to unmount everything and mounts the remaining read-only
 * systemd checks, if there is a /run/initramfs/shutdown executable
 * if yes, it does a pivot_root to /run/initramfs and executes ./shutdown.
-  The old root is then mounted on /oldroot. /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable.
-* shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules
+  The old root is then mounted on /oldroot.
+  /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable.
+* shutdown will try to umount every /oldroot mount and calls the various
+  shutdown hooks from the dracut modules
 
 This ensures, that all devices are disassembled and unmounted cleanly.
 
 = User Manual
 
-== Creating an initramfs Image
-To create a initramfs image, the most simple command is:
-----
-# dracut
-----
-
-This will generate a general purpose initramfs image, with all possible
-functionality resulting of the combination of the installed dracut modules and
-system tools. The image is /boot/initramfs-_++<kernel version>++_.img and
-contains the kernel modules of the currently active kernel with version
-_++<kernel version>++_.
-
-If the initramfs image already exists, dracut will display an error message, and
-to overwrite the existing image, you have to use the --force option.
-----
-# dracut --force
-----
-
-If you want to specify another filename for the resulting image you would issue
-a command like:
-----
-# dracut foobar.img
-----
-
-To generate an image for a specific kernel version, the command would be:
-----
-# dracut foobar.img 2.6.40-1.rc5.f20
-----
-
-A shortcut to generate the image at the default location for a specific kernel
-version is:
-----
-# dracut --kver 2.6.40-1.rc5.f20
-----
-
-If you want to create lighter, smaller initramfs images, you may want to specify
-the --host-only or -H option. Using this option, the resulting image will
-contain only those dracut modules, kernel modules and filesystems, which are
-needed to boot this specific machine. This has the drawback, that you can't put
-the disk on another controller or machine, and that you can't switch to another
-root filesystem, without recreating the initramfs image. The usage of the
---host-only option is only for experts and you will have to keep the broken
-pieces. At least keep a copy of a general purpose image (and corresponding
-kernel) as a fallback to rescue your system.
-
-=== Inspecting the Contents
-To see the contents of the image created by dracut, you can use the lsinitrd tool.
-----
-# lsinitrd /boot/initramfs-$(uname -r).img | less
-----
-
-To display the contents of a file in the initramfs also use the lsinitrd tool:
-----
-# lsinitrd /boot/initramfs-$(uname -r).img  /etc/ld.so.conf
-include ld.so.conf.d/*.conf
-----
-
-=== Adding dracut Modules
-Some dracut modules are turned off by default and have to be activated manually.
-You can do this by adding the dracut modules to the configuration file
-_/etc/dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_. See <<dracutconf5>>.
-You can also add dracut modules on the command line
-by using the -a or --add option:
-----
-# dracut --add bootchart initramfs-bootchart.img
-----
-
-To see a list of available dracut modules, use the --list-modules option:
-----
-# dracut --list-modules
-----
-
-or, if you have a dracut version earlier than +008+, issue the command:
-----
-# for mod in /usr/lib/dracut/modules.d/*; do echo ${mod##*/??}; done
-----
-
-=== Omitting dracut Modules
-Sometimes you don't want a dracut module to be included for reasons of speed,
-size or functionality. To do this, either specify the omit_dracutmodules
-variable in the _dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_ configuration
-file (see <<dracutconf5>>), or use the -o or --omit option
-on the command line:
-----
-# dracut -o "multipath lvm" no-multipath-lvm.img
-----
-
-=== Adding Kernel Modules
-If you need a special kernel module in the initramfs, which is not
-automatically picked up by dracut, you have the use the --add-drivers option
-on the command line or  the drivers vaiable in  the _/etc/dracut.conf_
-or _/etc/dracut.conf.d/myconf.conf_ configuration file (see <<dracutconf5>>):
-----
-# dracut --add-drivers mymod initramfs-with-mymod.img
-----
-
-== Boot parameters
-The generated initramfs.img file normally does not contain any system
-configuration files (except for some special exceptions), so the configuration
-has to be done on the kernel command line. With this flexibility, you can easily
-boot from a changed root partition, without the need to recompile the initramfs
-image. So, you could completly change your root partition (move it inside a md
-raid with encryption and LVM on top), as long as you specify the correct
-filesystem LABEL or UUID on the kernel command line for your root device, dracut
-will find it and boot from it.
-
-The kernel command line usually can be configured in _/boot/grub/grub.conf_, if
-grub is your bootloader and it also can be edited in the real boot process in
-the grub menu.
-
-The kernel command line can also be provided by the dhcp server with the
-root-path option. See <<NetworkBoot>>.
-
-For a full reference of all kernel command line parameters, see <<dracut8>>.
-
-=== Specifying the root Device
-This is the only option dracut really needs to boot from your root partition.
-Because your root partition can live in various environments, there are a lot of
-formats for the root= option. The most basic one is root=_++<path to device
-node>++_:
-----
-root=/dev/sda2
-----
-
-Because device node names can change, dependent on the drive ordering, you are
-encouraged to use the filesystem identifier (UUID) or filesystem label (LABEL)
-to specify your root partition:
-----
-root=UUID=19e9dda3-5a38-484d-a9b0-fa6b067d0331
-----
-
-or
-
-----
-root=LABEL=myrootpartitionlabel
-----
-
-To see all UUIDs or LABELs on your system, do:
-----
-# ls -l /dev/disk/by-uuid
-----
-
-or
-
-----
-# ls -l /dev/disk/by-label
-----
-
-If your root partition is on the network see <<NetworkBoot>>.
-
-=== Keyboard Settings
-If you have to input passwords for encrypted disk volumes, you might want to set
-the keyboard layout and specify a display font.
-
-A typical german kernel command would contain:
-----
-vconsole.font=latarcyrheb-sun16 vconsole.keymap=de-latin1-nodeadkeys locale.LANG=de_DE.UTF-8
-----
-
-Setting these options can override the setting stored on your system, if you use
-a modern init system, like systemd.
-
-For dracut versions prior to version +008+ the line would look like:
-----
-LANG=de_DE.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=de-latin1-nodeadkeys
-----
-
-=== Blacklisting Kernel Modules
-Sometimes it is required to prevent the automatic kernel module loading of a
-specific kernel module. To do this, just add rd.blacklist=_++<kernel module
-name>++_, with _++<kernel module name>++_ not containing the _.ko_
-suffix, to the kernel command line. For example:
-----
-rd.driver.blacklist=mptsas rd.driver.blacklist=nouveau
-----
-
-The option can be specified multiple times on the kernel command line.
-
-=== Speeding up the Boot Process
-If you want to speed up the boot process, you can specify as much information
-for dracut on the kernel command as possible. For example, you can tell dracut,
-that you root partition is not on a LVM volume or not on a raid partition, or
-that it lives inside a specific crypto LUKS encrypted volume. By default, dracut
-searches everywhere. A typical dracut kernel command line for a plain primary or
-logical partition would contain:
-----
-rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0
-----
-
-On systems with dracut version prior to +008+ the line would look like:
-----
-rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM
-----
-
-This turns off every automatic assembly of LVM, MD raids, DM raids and crypto LUKS.
-
-Of course, you could also omit the dracut modules in the initramfs creation
-process, but then you would lose the posibility to turn it on on demand.
-
-
-[[Injecting]]
-=== Injecting custom Files
-To add your own files to the initramfs image, you have several possibilities.
-
-The --include option let you specify a source path and a target path. For example
-----
-# dracut --include cmdline-preset /etc/cmdline.d/mycmdline.conf initramfs-cmdline-pre.img
-----
-will create an initramfs image, where the file cmdline-preset will be copied
-inside the initramfs to _/etc/cmdline.d/mycmdline.conf_. --include can only be specified once.
-
-
-----
-# mkdir rd.live.overlay
-# mkdir rd.live.overlay/etc
-# mkdir rd.live.overlay/etc/conf.d
-# mkdir rd.live.overlay/etc/cmdline.d
-# echo "ip=auto" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
-# echo export FOO=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
-# echo export BAR=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
-# tree rd.live.overlay/
-rd.live.overlay/
-└── etc
-    ├── cmdline.d
-        │   └── mycmdline.conf
-	    └── conf.d
-	            └── testvar.conf
-
-# dracut --include rd.live.overlay / initramfs-rd.live.overlay.img
-----
-
-This will put the contents of the rd.live.overlay directory into the root of the
-initramfs image.
-
-The --install option let you specify several files, which will get installed in
-the initramfs image at the same location, as they are present on initramfs
-creation time.
-
-
-----
-# dracut --install 'strace fsck.ext3 ssh' initramfs-dbg.img
-----
-
-This will create an initramfs with the strace, fsck.ext3 and ssh executables,
-together with the libraries needed to start those. The --install option can be
-specified multiple times.
-
-
-[[NetworkBoot]]
-== Network Boot
-
-If your root partition is on a network drive, you have to have the network
-dracut modules installed to create a network aware initramfs image.
-
-On a Red Hat Enterprise Linux or Fedora system, this means, you have to install
-the _dracut-network_ rpm package:
-
-
-----
-# yum install dracut-network
-----
-
-The resulting initramfs image can be served by a boot manager residing on your
-local hard drive or it can be served by a PXE/TFTP server.
-
-How to setup your PXE/TFTP server can be found in the
-http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
-Hat Enterprise Linux Storage Administration Guide].
-
-If you specify ip=auto on the kernel command line, then dracut asks a dhcp
-server about the ip adress for the machine. The dhcp server can also serve an
-additional root-path, which will set the root device for dracut. With this
-mechanism, you have static configuration on your client machine and a
-centralized boot configuration on your TFTP/DHCP server. If you can't pass a
-kernel command line, then you can inject _/etc/cmdline.d/mycmdline.conf_, with a method described
-in <<Injecting>>.
-
-
-
-
-=== Reducing the Image Size
-
-To reduce the size of the initramfs, you should create it with by ommitting all
-dracut modules, which you know, you don't need to boot the machine.
-
-You can also specify the exact dracut and kernel modules to produce a very tiny
-initramfs image.
-
-For example for a NFS image, you would do:
-
-
-----
-# dracut -m "nfs network  base" initramfs-nfs-only.img
-----
-
-Then you would boot from this image with your target machine and reduce the size
-once more by creating it on the target machine with the --host-only option:
-
-
-----
-# dracut -m "nfs network base" --host-only initramfs-nfs-host-only.img
-----
-
-This will reduce the size of the initramfs image significantly.
-
-
-
-=== NFS Root Device
-
-FIXME
-
-=== iSCSI Root Device
-
-FIXME 
-
-=== FCoE Root Device
-
-FIXME
-
-== Troubleshooting
-
-If the boot process does not succeed, you have several options to debug the
-situation. Some of the basic operations are covered here. For more information
-you should also visit:
-http://fedoraproject.org/wiki/How_to_debug_Dracut_problems
-
-
-[[identifying-your-problem-area]]
-=== Identifying your problem area
-. Remove ''rhgb'' and ''quiet'' from the kernel command line
-. Add ''rd.shell'' to the kernel command line. This will present a shell should
-dracut be unable to locate your root device
-. Add ''rd.shell rd.debug log_buf_len=1M'' to the kernel command line so that
-dracut shell commands are printed as they are executed
-. With dracut >= 002-11, you can inspect the rd.debug output with:
-+
-----
-# less /run/initramfs/init.log
-# dmesg | less
-----
-. With dracut >= 022 and systemd, you can inspect the rd.debug output with:
-----
-# journalctl -ab
-----
-. With dracut >= 025 the file /run/initramfs/rdsosreport.txt is generated, which contains all the logs and the output of all significant tools, which are mentioned later.
-
-If you want to save that output, simply mount /boot by hand or insert an USB stick and mount that.
-Then you can store the output for later inspection.
-
-[[information-to-include-in-your-report]]
-=== Information to include in your report
-
-[[all-bug-reports]]
-==== All bug reports
-In all cases, the following should be mentioned and attached to your bug report:
-
-* The exact kernel command-line used. Typically from the bootloader
-configuration file (e.g. _/etc/grub.conf_) or from _/proc/cmdline_.
-* A copy of your disk partition information from _/etc/fstab_, which might be
-obtained booting an old working initramfs or a rescue medium.
-* A device listing from device-mapper. This can be obtained by running the
-command
-+
-----
-# dmsetup ls --tree
-----
-+
-* A list of block device attributes. This can be obtained by running the commands: 
-+
-----
-# blkid -p
-# blkid -p -o udev
-----
-* Turn on dracut debugging (see _the 'debugging dracut' section_), and attach
-all relevant information from the boot log. This can be obtained by running the
-command 
-+
-----
-# dmesg|grep dracut
-----
-+
-* If you use a dracut configuration file, please include _/etc/dracut.conf_ and
-all files in _/etc/dracut.conf.d/*.conf_
-
-[[logical-volume-management-related-problems]]
-==== Logical Volume Management related problems
-As well as the information from <<all-bug-reports>> include the following
-information:
-
-* Include physical volume information by running the command:
-+
-----
-# lvm pvdisplay
-----
-+
-* Include volume group information by running the command:
-+
-----
-# lvm vgdisplay
-----
-+
-* Include logical volume information by running the command:
-+
-----
-# lvm lvdisplay
-----
-
-[[software-raid-related-problems]]
-==== Software RAID related problems
-As well as the information from <<all-bug-reports>>, include the following
-information:
-
-* If using software RAID disk partitions, please include the output of
-+
-----
-# cat /proc/mdstat
-----
-
-[[network-root-device-related-problems]]
-==== Network root device related problems
-This section details information to include when experiencing problems on a
-system whose root device is located on a network attached volume (e.g. iSCSI,
-NFS or NBD). As well as the information from <<all-bug-reports>>, include the
-following information:
-
-
-* Please include the output of
-+
-----
-# /sbin/ifup <interfacename>
-# ip addr show
-----
-
-[[debugging-dracut]]
-=== Debugging dracut
-
-
-[[configure-a-serial-console]]
-==== Configure a serial console
-
-Successfully debugging dracut will require some form of console
-logging during the system boot.  This section documents configuring a
-serial console connection to record boot messages.
-
-. First, enable serial console output for both the kernel and the bootloader.
-. Open the file _/etc/grub.conf_ for editing. Below the line ''timeout=5'', add
-the following:
-+
-----
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-----
-+
-. Also in _/etc/grub.conf_, add the following boot arguemnts to the ''kernel''
-line:
-+
-----
-console=tty0 console=ttyS0,9600
-----
-+
-. When finished, the _/etc/grub.conf_ file should look similar to the example
-below.
-+
-----
-default=0
-timeout=5
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-title Fedora (2.6.29.5-191.fc11.x86_64)
-  root (hd0,0)
-  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 console=ttyS0,9600
-  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
-----
-+
-. More detailed information on how to configure the kernel for console output
-can be found at
-http://www.faqs.org/docs/Linux-HOWTO/Remote-Serial-Console-HOWTO.html#CONFIGURE-KERNEL.
-. Redirecting non-interactive output
-+
---
-NOTE: You can redirect all non-interactive output to _/dev/kmsg_ and the kernel
-will put it out on the console when it reaches the kernel buffer by doing
-
-----
-# exec >/dev/kmsg 2>&1 </dev/console
-----
---
-
-[[using-the-dracut-shell]]
-==== Using the dracut shell
-
-dracut offers a shell for interactive debugging in the event dracut fails to
-locate your root filesystem. To enable the shell:
-
-. Add the boot parameter ''rd.shell'' to your bootloader configuration file
-(e.g. _/etc/grub.conf_)
-. Remove the boot arguments ''rhgb'' and ''quiet''
-+
-A sample _/etc/grub.conf_ bootloader configuration file is listed below.
-+
-----
-default=0
-timeout=5
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-title Fedora (2.6.29.5-191.fc11.x86_64)
-  root (hd0,0)
-  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 rd.shell
-  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
-----
-+
-. If system boot fails, you will be dropped into a shell as seen in the example below.
-+
-----
-No root device found
-Dropping to debug shell.
-
-#
-----
-+
-. Use this shell prompt to gather the information requested above (see <<all-bug-reports>>).
-
-[[accessing-the-root-volume-from-the-dracut-shell]]
-==== Accessing the root volume from the dracut shell
-From the dracut debug shell, you can manually perform the task of locating and
-preparing your root volume for boot. The required steps will depend on how your
-root volume is configured. Common scenarios include:
-
-* A block device (e.g. _/dev/sda7_)
-* A LVM logical volume (e.g. _/dev/VolGroup00/LogVol00_)
-* An encrypted device (e.g. _/dev/mapper/luks-4d5972ea-901c-4584-bd75-1da802417d83_)
-* A network attached device (e.g. netroot=iscsi:@192.168.0.4::3260::iqn.2009-02.org.fedoraproject:for.all)
-
-The exact method for locating and preparing will vary. However, to continue with
-a successful boot, the objective is to locate your root volume and create a
-symlink _/dev/root_ which points to the file system. For example, the following
-example demonstrates accessing and booting a root volume that is an encrypted
-LVM Logical volume.
-
-. Inspect your partitions using parted
-+
-----
-# parted /dev/sda -s p
-Model: ATA HTS541060G9AT00 (scsi)
-Disk /dev/sda: 60.0GB
-Sector size (logical/physical): 512B/512B
-Partition Table: msdos
-Number  Start   End     Size    Type      File system  Flags
-1      32.3kB  10.8GB  107MB   primary   ext4         boot
-2      10.8GB  55.6GB  44.7GB  logical                lvm
-----
-+
-. You recall that your root volume was a LVM logical volume. Scan and activate
-any logical volumes.
-+
-----
-# lvm vgscan
-# lvm vgchange -ay
-----
-+
-. You should see any logical volumes now using the command blkid:
-+
-----
-# blkid
-/dev/sda1: UUID="3de247f3-5de4-4a44-afc5-1fe179750cf7" TYPE="ext4"
-/dev/sda2: UUID="Ek4dQw-cOtq-5MJu-OGRF-xz5k-O2l8-wdDj0I" TYPE="LVM2_member"
-/dev/mapper/linux-root: UUID="def0269e-424b-4752-acf3-1077bf96ad2c" TYPE="crypto_LUKS"
-/dev/mapper/linux-home: UUID="c69127c1-f153-4ea2-b58e-4cbfa9257c5e" TYPE="ext3"
-/dev/mapper/linux-swap: UUID="47b4d329-975c-4c08-b218-f9c9bf3635f1" TYPE="swap"
-----
-+
-. From the output above, you recall that your root volume exists on an encrypted
-block device. Following the guidance disk encryption guidance from the
-Installation Guide, you unlock your encrypted root volume.
-+
-----
-# UUID=$(cryptsetup luksUUID /dev/mapper/linux-root)
-# cryptsetup luksOpen /dev/mapper/linux-root luks-$UUID
-Enter passphrase for /dev/mapper/linux-root:
-Key slot 0 unlocked.
-----
-+
-. Next, make a symbolic link to the unlocked root volume
-+
-----
-# ln -s /dev/mapper/luks-$UUID /dev/root
-----
-+
-. With the root volume available, you may continue booting the system by exiting
-the dracut shell
-+
-----
-# exit
-----
-
-[[additional-dracut-boot-parameters]]
-==== Additional dracut boot parameters
-For more debugging options, see <<dracutkerneldebug>> in <<dracutcmdline7>>.
-
-= Developer Manual
-
-== dracut Components
-
-dracut uses a modular system to build and extend the initramfs image. All
-modules are located in _/usr/lib/dracut/modules.d_ or in _<git-src>/modules.d_.
-The most basic dracut module is _99base_. In _99base_ the initial shell script
-init is defined, which gets run by the kernel after initramfs loading. Although
-you can replace init with your own version of _99base_, this is not encouraged.
-Instead you should use, if possible, the hooks of dracut. All hooks, and the
-point of time in which they are executed, are described in <<stages>>.
-
-The main script, which creates the initramfs is dracut itsself. It parses all
-arguments and sets up the directory, in which everything is installed. It then
-executes all check, install, installkernel scripts found in the modules, which
-are to be processed. After everything is installed, the install directory is
-archived and compressed to the final initramfs image. All helper functions used
-by check, install and installkernel are found in in the file _dracut-functions_.
-These shell functions are available to all module installer (install,
-installkernel) scripts, without the need to source _dracut-functions_.
-
-A module can check the preconditions for install and installkernel with the
-check script. Also dependencies can be expressed with check. If a module passed
-check, install and installkernel will be called to install all of the necessary
-files for the module. To split between kernel and non-kernel parts of the
-installation, all kernel module related parts have to be in installkernel. All
-other files found in a module directory are module specific and mostly are hook
-scripts and udev rules.
-
-
-[[stages]]
-== Boot Process Stages
-
-The init script in _99base_ is the main script, which prepares the root file
-system for usage, runs udev, mounts the real root device, kills the remaining
-processes, and switches to the real root device for further booting. dracut
-modules can insert custom script at various points, to control the boot process.
-These hooks are plain directories containing shell scripts ending with ".sh",
-which are sourced by init.
-Common used functions are in _dracut-lib.sh_, which can be sourced by any script.
-
-
-
-=== Basic Setup
-
-The first thing init does, is to mount _/proc_ and _/sys_ and manually create
-the basic device nodes and symbolic links in _/dev_ needed to execute basic
-commands. Then logging is setup according to kernel command line arguments.
-_/dev/pts_ and _/dev/shm_ are mounted and the first hook is sourced.
-
-
-
-=== Hook: cmdline
-
-The _cmdline_ hook is a place to insert scripts to parse the kernel command line
-and prepare the later actions, like setting up udev rules and configuration
-files.
-
-In this hook the most important environment variable is defined: root. The
-second one is rootok, which indicates, that a module claimed to be able to parse
-the root defined. So for example, **root=**__iscsi:....__ will be claimed by the
-iscsi dracut module, which then sets rootok.
-
-=== Hook: pre-udev
-
-This hook is executed right after the cmdline hook and a check if root and
-rootok were set. Here modules can take action with the final root, and before
-udev has been run.
-
-
-
-=== Start Udev
-
-Now udev is started and the logging for udev is setup.
-
-
-
-=== Hook: pre-trigger
-
-In this hook, you can set udev environment variables with **udevadm control
---property=KEY=_value_** or control the further execution of udev with
-udevadm.
-
-
-
-=== Trigger Udev
-
-udev is triggered by calling udevadm trigger, which sends add events for all
-devices and subsystems.
-
-
-
-=== Main Loop
-
-Now the main loop of 99base/init begins. Here we loop until udev has settled and
-all scripts in _initqueue/finished_ returned true. In this loop there are three
-hooks, where scripts can be inserted by calling /sbin/initqueue. 
-
-
-
-==== Initqueue
-
-This hook gets executed every time a script is inserted here, regardless of the
-udev state.
-
-
-
-==== Initqueue settled
-
-This hooks gets executed every time udev has settled.
-
-
-
-==== Initqueue timeout
-
-This hooks gets executed, when the main loop counter becomes half of the
-rd.retry counter.
-
-
-
-==== Initqueue finished
-
-This hook is called after udev has settled and if all scripts herein return 0
-the main loop will be ended.
-
-
-
-=== Hook: pre-mount
-
-Before the root device is mounted all scripts in the hook pre-mount are
-executed. In some cases (e.g. NFS) the real root device is already mounted,
-though.
-
-
-
-=== Hook: mount
-
-This hook is mainly to mount the real root device.
-
-
-
-=== Hook: pre-pivot
-
-This hook is called before cleanup hook, This is a good place for
-actions other than cleanups which need to be called before pivot.
-
-
-=== Hook: cleanup
-
-This hook is the last hook and is called before init finally switches root to
-the real root device. This is a good place to clean up and kill processes not
-needed anymore.
-
-
-=== Cleanup and switch_root
-
-Init kills all udev processes, cleans up the environment, sets up the arguments
-for the real init process and finally calls switch_root. switch_root removes the
-whole filesystem hierarchy of the initramfs, chroot()s to the real root device
-and calls /sbin/init with the specified arguments.
-
-To ensure all files in the initramfs hierarchy can be removed, all processes
-still running from the initramfs should not have any open file descriptors left.
-
-
-
-== Network Infrastructure
-
-FIXME
-
-
-== Writing a Module
-
-A simple example module is _96insmodpost_, which modprobes a kernel module after
-udev has settled and the basic device drivers have been loaded.
-
-All module installation information is in the file module-setup.sh.
-
-First we create a check() function, which just exits with 0 indicating that this
-module should be included by default.
-
-check():
-
-
-----
-return 0
-----
-
-The we create the install() function, which installs a cmdline hook with
-priority number 20 called _parse-insmodpost.sh_. It also installs the
-_insmodpost.sh_ script in _/sbin_.
-
-install():
-
-
-----
-inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
-inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
-----
-
-The _pase-instmodpost.sh_ parses the kernel command line for a argument
-rd.driver.post, blacklists the module from being autoloaded and installs the
-hook _insmodpost.sh_ in the _initqueue/settled_.
-
-_parse-insmodpost.sh_:
-
-
-----
-for p in $(getargs rd.driver.post=); do
-    echo "blacklist $p" >> /etc/modprobe.d/initramfsblacklist.conf
-    _do_insmodpost=1
-done
-
-[ -n "$_do_insmodpost" ] && /sbin/initqueue --settled --unique --onetime /sbin/insmodpost.sh
-unset _do_insmodpost
-
-----
-
-_insmodpost.sh_, which is called in the _initqueue/settled_ hook will just
-modprobe the kernel modules specified in all rd.driver.post kernel command line
-parameters. It runs after udev has settled and is only called once (--onetime).
-
-_insmodpost.sh_:
-
-
-----
-. /lib/dracut-lib.sh
-
-for p in $(getargs rd.driver.post=); do
-    modprobe $p
-done
-
-----
-
-
-
-=== check()
-
-_check()_ is called by dracut to evaluate the inclusion of a dracut module in
-the initramfs.
-
-$hostonly:: If the $hostonly variable is set, then the module check() function
-should be in "hostonly" mode, which means, that the check() should only return
-0, if the module is really needed to boot this specific host.
-
-check() should return with:
-
-0:: Include the dracut module in the initramfs.
-
-1:: Do not include the dracut module. The requirements are not fullfilled
-(missing tools, etc.)
-
-255:: Only include the dracut module, if another module requires it or if
-explicitly specified in the config file or on the argument list.
-
-
-
-=== depends()
-
-The function depends() should echo all other dracut module names the module
-depends on.
-
-
-
-=== install()
-
-dracut_install
-
-inst
-
-inst_hook
-
-inst_rules
-
-
-
-
-
-=== installkernel()
-
-instmods
-
-
-
-=== Creation Functions
-
-FIXME
-
-
-=== Initramfs Functions
-
-FIXME
-
-
-=== Network Modules
-
-FIXME
-
 :leveloffset: 1
-[[dracutbootup7]]
-include::dracut.bootup.7.asc[]
-
-:leveloffset: 1
-[[dracut8]]
 include::dracut.8.asc[]
 
+:leveloffset: 1
 [[dracutconf5]]
 include::dracut.conf.5.asc[]
 
@@ -1062,6 +165,15 @@ include::lsinitrd.1.asc[]
 [[mkinitrd8]]
 include::mkinitrd.8.asc[]
 
+= Developer Manual
+
+:leveloffset: 1
+[[dracutmodules7]]
+include::dracut.modules.7.asc[]
+
+[[dracutbootup7]]
+include::dracut.bootup.7.asc[]
+
 :leveloffset: 0
 [appendix]
 License

dracut.bootup.7.asc

@@ -11,7 +11,8 @@ dracut.bootup - boot ordering in the initramfs
 DESCRIPTION
 -----------
 
-This flow chart illustrates the ordering of the services, if systemd is used in the dracut initramfs.
+This flow chart illustrates the ordering of the services, if systemd is used in
+the dracut initramfs.
 ----
 
                                     systemd-journal.socket

dracut.cmdline.7.asc

@@ -31,16 +31,16 @@ line is the value, which is honored.
 
 Standard
 ~~~~~~~~
-**init=**_<path to real init>_::
+**init=**__<path to real init>__::
     specify the path to the init programm to be started after the initramfs has
     finished
 
-**root=**_<path to blockdevice>_::
+**root=**__<path to blockdevice>__::
     specify the block device to use as the root filesystem.
 +
-E.g.:
-+
-----
+[listing]
+.Example
+--
 root=/dev/sda1
 root=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1
 root=/dev/disk/by-label/Root
@@ -48,15 +48,17 @@ root=LABEL=Root
 root=/dev/disk/by-uuid/3f5ad593-4546-4a94-a374-bcfb68aa11f7
 root=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
 root=PARTUUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
-----
+--
 
-**rootfstype=**_<filesystem type>_:: "auto" if not specified, e.g.:
+**rootfstype=**__<filesystem type>__:: "auto" if not specified.
 +
-----
+[listing]
+.Example
+--
 rootfstype=ext3
-----
+--
 
-**rootflags=**_<mount options>_::
+**rootflags=**__<mount options>__::
     specify additional mount options for the root filesystem. If not set,
     _/etc/fstab_ of the real root will be parsed for special mount options and
     mounted accordingly.
@@ -69,24 +71,30 @@ rootfstype=ext3
     force mounting _/_ and _/usr_ (if it is a separate device) read-write.
     See also ro option.
 
+**rootfallback=**__<path to blockdevice>__::
+    specify the block device to use as the root filesystem, if the normal root
+    cannot be found. This can only be a simple block device with a simple file
+    system, for which the filesystem driver is either compiled in, or added
+    manually to the initramfs. This parameter can be specified multiple times.
+
 **rd.auto** **rd.auto=1**::
-    enable autoassembly of special devices like cryptoLUKS, dmraid, mdraid or lvm.
-    Default is off as of dracut version >= 024.
+    enable autoassembly of special devices like cryptoLUKS, dmraid, mdraid or
+    lvm. Default is off as of dracut version >= 024.
 
 **rd.fstab=0**::
     do not honor special mount options for the root filesystem found in
     _/etc/fstab_ of the real root.
 
-**resume=**_<path to resume partition>_::
+**resume=**__<path to resume partition>__::
     resume from a swap partition
 +
-E.g.:
-+
-----
+[listing]
+.Example
+--
 resume=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1
 resume=/dev/disk/by-uuid/3f5ad593-4546-4a94-a374-bcfb68aa11f7
 resume=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
-----
+--
 
 **rd.skipfsck**::
     skip fsck for rootfs and _/usr_.  If you're mounting _/usr_ read-only and
@@ -96,19 +104,19 @@ resume=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
 
 Misc
 ~~~~
-**rd.driver.blacklist=**_<drivername>[,<drivername>,...]_::
+**rd.driver.blacklist=**__<drivername>__[,__<drivername>__,...]::
     do not load kernel module <drivername>. This parameter can be specified
     multiple times.
 
-**rd.driver.pre=**_<drivername>[,<drivername>,...]_::
+**rd.driver.pre=**__<drivername>__[,__<drivername>__,...]::
     force loading kernel module <drivername>. This parameter can be specified
     multiple times.
 
-**rd.driver.post=**_<drivername>[,<drivername>,...]_::
+**rd.driver.post=**__<drivername>__[,__<drivername>__,...]::
     force loading kernel module <drivername> after all automatic loading modules
     have been loaded. This parameter can be specified multiple times.
 
-**rd.retry=**_<seconds>_::
+**rd.retry=**__<seconds>__::
     specify how long dracut should wait for devices to appear.
     The default is 30 seconds. After 2/3 of the time, degraded raids are force
     started. If you have hardware, which takes a very long time to announce its
@@ -117,20 +125,17 @@ Misc
 **rd.noverifyssl**::
     accept self-signed certificates for ssl downloads.
 
-**rd.ctty=**_<terminal device>_**::
+**rd.ctty=**__<terminal device>__::
    specify the controlling terminal for the console.
    This is useful, if you have multiple "console=" arguments.
 
-**rd.action_on_fail=**_{shell|continue}_::
-   Specify the action after failure. By default it's emergency_shell.
-   'continue' means: ignore the current failure and go ahead.
-
 [[dracutkerneldebug]]
 Debug
 ~~~~~
-If you are dropped to an emergency shell, the file _/run/initramfs/rdsosreport.txt_ is created,
-which can be safed to a (to be mounted by hand) partition (usually /boot) or a USB stick.
-Additional debugging info can be produced by adding **rd.debug** to the kernel command line.
+If you are dropped to an emergency shell, the file 
+_/run/initramfs/rdsosreport.txt_ is created, which can be safed to a (to be
+mounted by hand) partition (usually /boot) or a USB stick. Additional debugging
+info can be produced by adding **rd.debug** to the kernel command line.
 _/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools.
 It should be attached to any report about dracut problems.
 
@@ -142,23 +147,28 @@ It should be attached to any report about dracut problems.
 
 **rd.debug**::
     set -x for the dracut shell.
-    If systemd is active in the initramfs, all output is logged to the systemd journal,
-    which you can inspect with "journalctl -ab".
-    If systemd is not active, the logs are written to dmesg and _/run/initramfs/init.log_.
+    If systemd is active in the initramfs, all output is logged to the systemd
+    journal, which you can inspect with "journalctl -ab".
+    If systemd is not active, the logs are written to dmesg and
+    _/run/initramfs/init.log_.
     If "quiet" is set, it also logs to the console.
 
 **rd.memdebug=[0-3]**::
-    Print memory usage info at various points, set the verbose level from 0 to 3
+    Print memory usage info at various points, set the verbose level from 0 to 3.
++    
     Higher level means more debugging output:
++
+----
     0 - no output
     1 - partial /proc/meminfo
     2 - /proc/meminfo
     3 - /proc/meminfo + /proc/slabinfo
+----
 
 **rd.break**::
     drop to a shell at the end
 
-**rd.break=**_{cmdline|pre-udev|pre-trigger|initqueue|pre-mount|mount|pre-pivot|cleanup}_::
+**rd.break=**__{cmdline|pre-udev|pre-trigger|initqueue|pre-mount|mount|pre-pivot|cleanup}__::
     drop to a shell on defined breakpoint
 
 **rd.udev.info**::
@@ -169,50 +179,56 @@ It should be attached to any report about dracut problems.
 
 I18N
 ~~~~
-**vconsole.keymap=**_<keymap base file name>_::
+**rd.vconsole.keymap=**__<keymap base file name>__::
     keyboard translation table loaded by loadkeys; taken from keymaps directory;
-    will be written as KEYMAP to _/etc/vconsole.conf_ in the initramfs, e.g.:
+    will be written as KEYMAP to _/etc/vconsole.conf_ in the initramfs.
 +
-----
-vconsole.keymap=de-latin1-nodeadkeys
-----
+[listing]
+.Example
+--
+rd.vconsole.keymap=de-latin1-nodeadkeys
+--
 
-**vconsole.keymap.ext=**_<list of keymap base file names>_::
+**rd.vconsole.keymap.ext=**__<list of keymap base file names>__::
     list of extra keymaps to bo loaded (sep. by space); will be written as
     EXT_KEYMAP to _/etc/vconsole.conf_ in the initramfs
 
-**vconsole.unicode**[=_{0|1}_]::
+**rd.vconsole.unicode**::
     boolean, indicating UTF-8 mode; will be written as UNICODE to
     _/etc/vconsole.conf_ in the initramfs
 
-**vconsole.font=**_<font base file name>_::
+**rd.vconsole.font=**__<font base file name>__::
     console font; taken from consolefonts directory; will be written as FONT to
-    _/etc/vconsole.conf_ in the initramfs; e.g.:
+    _/etc/vconsole.conf_ in the initramfs.
 +
-----
-vconsole.font=LatArCyrHeb-16
-----
+[listing]
+.Example
+--
+rd.vconsole.font=LatArCyrHeb-16
+--
 
-**vconsole.font.map=**_<console map base file name>_::
+**rd.vconsole.font.map=**__<console map base file name>__::
     see description of '-m' parameter in setfont manual; taken from consoletrans
     directory; will be written as FONT_MAP to _/etc/vconsole.conf_ in the
     initramfs
 
-**vconsole.font.unimap=**_<unicode table base file name>_::
+**rd.vconsole.font.unimap=**__<unicode table base file name>__::
     see description of '-u' parameter in setfont manual; taken from unimaps
     directory; will be written as FONT_UNIMAP to _/etc/vconsole.conf_ in the
     initramfs
 
-**locale.LANG=**_<locale>_::
+**rd.locale.LANG=**__<locale>__::
     taken from the environment; if no UNICODE is defined we set its value in
     basis of LANG value (whether it ends with ".utf8" (or similar) or not); will
-    be written as LANG to _/etc/locale.conf_ in the initramfs; e.g.:
+    be written as LANG to _/etc/locale.conf_ in the initramfs.
 +
-----
-locale.LANG=pl_PL.utf8
-----
+[listing]
+.Example
+--
+rd.locale.LANG=pl_PL.utf8
+--
 
-**locale.LC_ALL=**_<locale>_::
+**rd.locale.LC_ALL=**__<locale>__::
     taken from the environment; will be written as LC_ALL to _/etc/locale.conf_
     in the initramfs
 
@@ -221,11 +237,11 @@ LVM
 **rd.lvm=0**::
     disable LVM detection
 
-**rd.lvm.vg=**_<volume group name>_::
+**rd.lvm.vg=**__<volume group name>__::
     only activate the volume groups with the given name. rd.lvm.vg can be
     specified multiple times on the kernel command line.
 
-**rd.lvm.lv=**_<logical volume name>_::
+**rd.lvm.lv=**__<logical volume name>__::
     only activate the logical volumes with the given name. rd.lvm.lv can be
     specified multiple times on the kernel command line.
 
@@ -237,18 +253,18 @@ crypto LUKS
 **rd.luks=0**::
     disable crypto LUKS detection
 
-**rd.luks.uuid=**_<luks uuid>_::
+**rd.luks.uuid=**__<luks uuid>__::
     only activate the LUKS partitions with the given UUID. Any "luks-" of the
     LUKS UUID is removed before comparing to _<luks uuid>_.
     The comparisons also matches, if _<luks uuid>_ is only the beginning of the
     LUKS UUID, so you don't have to specify the full UUID.
     This parameter can be specified multiple times.
 
-**rd.luks.allow-discards=**_<luks uuid>_::
-    Allow  using  of discards (TRIM) requests for LUKS partitions with the given UUID.
-    Any "luks-" of the LUKS UUID is removed before comparing to _<luks uuid>_.
-    The comparisons also matches, if _<luks uuid>_ is only the beginning of the
-    LUKS UUID, so you don't have to specify the full UUID.
+**rd.luks.allow-discards=**__<luks uuid>__::
+    Allow  using  of discards (TRIM) requests for LUKS partitions with the given
+    UUID. Any "luks-" of the LUKS UUID is removed before comparing to
+    _<luks uuid>_. The comparisons also matches, if _<luks uuid>_ is only the
+    beginning of the LUKS UUID, so you don't have to specify the full UUID.
     This parameter can be specified multiple times.
 
 **rd.luks.allow-discards**::
@@ -259,16 +275,28 @@ crypto LUKS
 
 crypto LUKS - key on removable device support
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-**rd.luks.key=**_<keypath>:<keydev>:<luksdev>_::
-    _keypath_ is a path to key file to look for. It's REQUIRED. When _keypath_ ends with '.gpg' it's considered to be key encrypted symmetrically with GPG. You will be prompted for password on boot. GPG support comes with 'crypt-gpg' module which needs to be added explicitly.
+**rd.luks.key=**__<keypath>__:__<keydev>__:__<luksdev>__::
+    _keypath_ is a path to key file to look for. It's REQUIRED. When _keypath_
+    ends with '.gpg' it's considered to be key encrypted symmetrically with GPG.
+    You will be prompted for password on boot. GPG support comes with
+    'crypt-gpg' module which needs to be added explicitly.
 +
-_keydev_ is a device on which key file resides. It might be kernel name of devices (should start with "/dev/"), UUID (prefixed with "UUID=") or label (prefix with "LABEL="). You don't have to specify full UUID. Just its beginning will suffice, even if its ambiguous. All matching devices will be probed. This parameter is recommended, but not required. If not present, all block devices will be probed, which may significantly increase boot time.
+_keydev_ is a device on which key file resides. It might be kernel name of
+devices (should start with "/dev/"), UUID (prefixed with "UUID=") or label
+(prefix with "LABEL="). You don't have to specify full UUID. Just its beginning
+will suffice, even if its ambiguous. All matching devices will be probed.
+This parameter is recommended, but not required. If not present, all block
+devices will be probed, which may significantly increase boot time.
 +
-If _luksdev_ is given, the specified key will only be applied for that LUKS device. Possible values are the same as for _keydev_. Unless you have several LUKS devices, you don't have to specify this parameter. The simplest usage is:
+If _luksdev_ is given, the specified key will only be applied for that LUKS
+device. Possible values are the same as for _keydev_. Unless you have several
+LUKS devices, you don't have to specify this parameter. The simplest usage is:
 +
-----
+[listing]
+.Example
+--
 rd.luks.key=/foo/bar.key
-----
+--
 +
 As you see, you can skip colons in such a case.
 +
@@ -279,20 +307,20 @@ to crypsetup luksFormat with _-d -_, too!
 
 Here follows example for key encrypted with GPG:
 
-----
-gpg --quiet --decrypt rootkey.gpg \
-| cryptsetup -d - -v \
---cipher serpent-cbc-essiv:sha256 \
+[listing]
+--
+gpg --quiet --decrypt rootkey.gpg | \
+cryptsetup -d - -v --cipher serpent-cbc-essiv:sha256 \
 --key-size 256 luksFormat /dev/sda3
-----
+--
 
 If you use plain keys, just add path to _-d_ option:
 
-----
-cryptsetup -d rootkey.key -v \
---cipher serpent-cbc-essiv:sha256 \
---key-size 256 luksFormat /dev/sda3
-----
+[listing]
+--
+cryptsetup -d rootkey.key -v --cipher serpent-cbc-essiv:sha256 \
+ --key-size 256 luksFormat /dev/sda3
+--
 ===============================
 
 MD RAID
@@ -310,9 +338,10 @@ MD RAID
     ignore mdadm.conf included in initramfs
 
 **rd.md.waitclean=1**::
-    wait for any resync, recovery, or reshape activity to finish before continuing
+    wait for any resync, recovery, or reshape activity to finish before
+    continuing
 
-**rd.md.uuid=**_<md raid uuid>_::
+**rd.md.uuid=**__<md raid uuid>__::
     only activate the raid sets with the given UUID. This parameter can be
     specified multiple times.
 
@@ -321,7 +350,7 @@ DM RAID
 **rd.dm=0**::
     disable DM RAID detection
 
-**rd.dm.uuid=**_<dm raid uuid>_::
+**rd.dm.uuid=**__<dm raid uuid>__::
    only activate the raid sets with the given UUID. This parameter can be
    specified multiple times.
 
@@ -330,15 +359,17 @@ FIPS
 **rd.fips**::
     enable FIPS
 
-**boot=**_<boot device>_::
-    specify the device, where /boot is located. e.g.
+**boot=**__<boot device>__::
+    specify the device, where /boot is located.
 +
-----
+[listing]
+.Example
+--
 boot=/dev/sda1
 boot=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1
 boot=UUID=<uuid>
 boot=LABEL=<label>
-----
+--
 
 **rd.fips.skipkernel**::
     skip checksum check of the kernel image. Useful, if the kernel image is not
@@ -346,10 +377,70 @@ boot=LABEL=<label>
 
 Network
 ~~~~~~~
-**ip=**_{dhcp|on|any|dhcp6|auto6|ibft}_::
-    dhcp|on|any::: get ip from dhcp server from all interfaces. If root=dhcp, loop
-    sequentially through all interfaces (eth0, eth1, ...) and use the first with
-    a valid DHCP root-path.
+
+[IMPORTANT]
+=====================
+It is recommended to either bind an interface to a MAC with the **ifname**
+argument, or to use the systemd-udevd predictable network interface names.
+
+Predictable network interface device names based on:
+
+- firmware/bios-provided index numbers for on-board devices
+- firmware-provided pci-express hotplug slot index number
+- physical/geographical location of the hardware
+- the interface's MAC address
+
+See:
+http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
+
+Two character prefixes based on the type of interface:
+
+en:: ethernet
+wl:: wlan
+ww:: wwan
+
+Type of names:
+
+o<index>:: on-board device index number
+s<slot>[f<function>][d<dev_id>]:: hotplug slot index number
+x<MAC>:: MAC address
+[P<domain>]p<bus>s<slot>[f<function>][d<dev_id>]:: PCI geographical location
+[P<domain>]p<bus>s<slot>[f<function>][u<port>][..][c<config>][i<interface>]:: USB port number chain
+
+All multi-function PCI devices will carry the [f<function>] number in the
+device name, including the function 0 device.
+
+When using PCI geography, The PCI domain is only prepended when it is not 0.
+
+For USB devices the full chain of port numbers of hubs is composed. If the
+name gets longer than the maximum number of 15 characters, the name is not
+exported.
+The usual USB configuration == 1 and interface == 0 values are suppressed.
+
+PCI ethernet card with firmware index "1"::
+* eno1
+
+PCI ethernet card in hotplug slot with firmware index number::
+* ens1
+
+PCI ethernet multi-function card with 2 ports::
+* enp2s0f0
+* enp2s0f1
+
+PCI wlan card::
+* wlp3s0
+
+USB built-in 3G modem::
+* wwp0s29u1u4i6
+
+USB Android phone::
+* enp0s29u1u2
+=====================
+
+**ip=**__{dhcp|on|any|dhcp6|auto6|ibft}__::
+    dhcp|on|any::: get ip from dhcp server from all interfaces. If root=dhcp,
+    loop sequentially through all interfaces (eth0, eth1, ...) and use the first
+    with a valid DHCP root-path.
 
     auto6::: IPv6 autoconfiguration
 
@@ -357,7 +448,7 @@ Network
 
     ibft::: iBFT autoconfiguration
 
-**ip=**_<interface>_:_{dhcp|on|any|dhcp6|auto6}_[:[_<mtu>_][:_<macaddr>_]]::
+**ip=**__<interface>__:__{dhcp|on|any|dhcp6|auto6}__[:[__<mtu>__][:__<macaddr>__]]::
     This parameter can be specified multiple times.
 +
 =====================
@@ -368,19 +459,12 @@ cannot be used in conjunction with the **ifname** argument for the
 same <interface>.
 =====================
 
-[IMPORTANT]
-=====================
-It is recommended to either bind <interface> to a MAC with the **ifname**
-argument. Or use biosdevname to name your interfaces, which will then have names according to their hardware location.
-
-em<port>::: for embedded NICs
-p<slot>#<port>_<virtual instance>::: for cards in PCI slots
-=====================
-
-**ip=**_<client-IP>_:_<server-IP>_:_<gateway-IP>_:_<netmask>_:_<client_hostname>_:_<interface>_:_{none|off|dhcp|on|any|dhcp6|auto6|ibft}_[:[_<mtu>_][:_<macaddr>_]]::
+**ip=**__<client-IP>__:[__<peer>__]:__<gateway-IP>__:__<netmask>__:__<client_hostname>__:__<interface>__:__{none|off|dhcp|on|any|dhcp6|auto6|ibft}__:[:[__<mtu>__][:__<macaddr>__]]::
     explicit network configuration. If you want do define a IPv6 address, put it
     in brackets (e.g. [2001:DB8::1]). This parameter can be specified multiple
-    times.
+    times. __<peer>__ is optional and is the address of the remote endpoint
+    for pointopoint interfaces and it may be followed by a slash and a decimal
+    number, encoding the network prefix length.
 +
 =====================
 <macaddr>::: optionally **set** <macaddr> on the <interface>. This
@@ -388,28 +472,31 @@ cannot be used in conjunction with the **ifname** argument for the
 same <interface>.
 =====================
 
-[IMPORTANT]
-=====================
-It is recommended to either bind <interface> to a MAC with the **ifname**
-argument. Or use biosdevname to name your interfaces, which will then have names according to their hardware location.
+**ip=**__<client-IP>__:[__<peer>__]:__<gateway-IP>__:__<netmask>__:__<client_hostname>__:__<interface>__:__{none|off|dhcp|on|any|dhcp6|auto6|ibft}__[:[__<dns1>__][:__<dns2>__]]::
+    explicit network configuration. If you want do define a IPv6 address, put it
+    in brackets (e.g. [2001:DB8::1]). This parameter can be specified multiple
+    times. __<peer>__ is optional and is the address of the remote endpoint
+    for pointopoint interfaces and it may be followed by a slash and a decimal
+    number, encoding the network prefix length.
 
-em<port>::: for embedded NICs
-p<slot>#<port>_<virtual instance>::: for cards in PCI slots
-=====================
-
-**ifname=**_<interface>_:_<MAC>_::
-    Assign network device name <interface> (ie "bootnet") to the NIC with MAC <MAC>.
+**ifname=**__<interface>__:__<MAC>__::
+    Assign network device name <interface> (ie "bootnet") to the NIC with
+    MAC <MAC>.
 +
-[IMPORTANT]
-
-Do **not** use the default kernel naming scheme for the interface name,
+WARNING: Do **not** use the default kernel naming scheme for the interface name,
 as it can conflict with the kernel names. So, don't use "eth[0-9]+" for the
 interface name. Better name it "bootnet" or "bluesocket".
 
-**bootdev=**_<interface>_::
+**bootdev=**__<interface>__::
     specify network interface to use routing and netroot information from.
     Required if multiple ip= lines are used.
 
+**BOOTIF=**__<MAC>__::
+    specify network interface to use routing and netroot information from.
+
+**rd.bootif=0**::
+    Disable BOOTIF parsing, which is provided by PXE
+
 **nameserver=**__<IP>__ [**nameserver=**__<IP>__ ...]::
     specify nameserver(s) to use
 
@@ -419,81 +506,83 @@ interface name. Better name it "bootnet" or "bluesocket".
 **rd.neednet=1**::
     boolean, bring up network even without netroot set
 
-**vlan=_<vlanname>_:_<phydevice>_**::
+**vlan=**__<vlanname>__:__<phydevice>__::
     Setup vlan device named <vlanname> on <phydeivce>.
-    We support the four styles of vlan names: VLAN_PLUS_VID (vlan0005), VLAN_PLUS_VID_NO_PAD (vlan5),
-    DEV_PLUS_VID (eth0.0005), DEV_PLUS_VID_NO_PAD (eth0.5)
+    We support the four styles of vlan names: VLAN_PLUS_VID (vlan0005),
+    VLAN_PLUS_VID_NO_PAD (vlan5), DEV_PLUS_VID (eth0.0005),
+    DEV_PLUS_VID_NO_PAD (eth0.5)
 
-**bond=_<bondname>_[:_<bondslaves>_:[:_<options>_]]**::
+**bond=**__<bondname>__[:__<bondslaves>__:[:__<options>__]]::
     Setup bonding device <bondname> on top of <bondslaves>.
     <bondslaves> is a comma-separated list of physical (ethernet) interfaces.
-    <options> is a comma-separated list on bonding options (modinfo bonding for details)
-    in format compatible with initscripts. If <options> includes multi-valued arp_ip_target option,
-    then its values should be separated by semicolon.
-    Bond without parameters assumes bond=bond0:eth0,eth1:mode=balance-rr
+    <options> is a comma-separated list on bonding options (modinfo bonding for
+    details) in format compatible with initscripts. If <options> includes
+    multi-valued arp_ip_target option, then its values should be separated by
+    semicolon. Bond without parameters assumes
+    bond=bond0:eth0,eth1:mode=balance-rr
 
-**team =_<teammaster>_:_<teamslaves>_**::
+**team=**__<teammaster>__:__<teamslaves>__::
     Setup team device <teammaster> on top of <teamslaves>.
     <teamslaves> is a comma-separated list of physical (ethernet) interfaces.
 
-**bridge=_<bridgename>_:_<ethnames>_**::
+**bridge=**__<bridgename>__:__<ethnames>__::
     Setup bridge <bridgename> with <ethnames>. <ethnames> is a comma-separated
-    list of physical (ethernet) interfaces. Bridge without parameters assumes bridge=br0:eth0
-
+    list of physical (ethernet) interfaces. Bridge without parameters assumes
+    bridge=br0:eth0
 
 NFS
 ~~~
-**root=**[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_]::
+**root=**\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__]::
     mount nfs share from <server-ip>:/<root-dir>, if no server-ip is given, use
     dhcp next_server. if server-ip is an IPv6 address it has to be put in
     brackets, e.g. [2001:DB8::1]. NFS options can be appended with the prefix
     ":" or "," and are seperated by ",".
 
-**root=**nfs:[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_], **root=**nfs4:[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_], **root=**_{dhcp|dhcp6}_::
+**root=**nfs:\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__], **root=**nfs4:\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__], **root=**__{dhcp|dhcp6}__::
     root=dhcp alone directs initrd to look at the DHCP root-path where NFS
     options can be specified.
 +
-----
+[listing]
+.Example
+--
     root-path=<server-ip>:<root-dir>[,<nfs-options>]
     root-path=nfs:<server-ip>:<root-dir>[,<nfs-options>]
     root-path=nfs4:<server-ip>:<root-dir>[,<nfs-options>]
-----
+--
 
-**root=**_/dev/nfs_ nfsroot=[_<server-ip>_:]_<root-dir>_[:_<nfs-options>_]::
+**root=**_/dev/nfs_ nfsroot=\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__]::
     _Deprecated!_ kernel Documentation_/filesystems/nfsroot.txt_ defines this
     method. This is supported by dracut, but not recommended.
 
-**rd.nfs.domain=**_<NFSv4 domain name>_::
+**rd.nfs.domain=**__<NFSv4 domain name>__::
     Set the NFSv4 domain name. Will overwrite the settings in _/etc/idmap.conf_.
 
 CIFS
 ~~~
-**root=**cifs://[_<username>_[:_<password>_]@]_<server-ip>_:_<root-dir>_::
+**root=**cifs://[__<username>__[:__<password>__]@]__<server-ip>__:__<root-dir>__::
     mount cifs share from <server-ip>:/<root-dir>, if no server-ip is given, use
     dhcp next_server. if server-ip is an IPv6 address it has to be put in
     brackets, e.g. [2001:DB8::1]. If a username or password are not specified
 as part of the root, then they must be passed on the command line through
 cifsuser/cifspass.
 +
-[WARNING]
-====
-Passwords specified on the kernel command line are visible for all users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the network, when using DHCP with DHCP root-path.
-====
+WARNING: Passwords specified on the kernel command line are visible for all
+users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the
+network, when using DHCP with DHCP root-path.
 
-**cifsuser=_<username>_::
+**cifsuser**=__<username>__::
     Set the cifs username, if not specified as part of the root.
 
-**cifspass=_<password>_::
+**cifspass**=__<password>__::
     Set the cifs password, if not specified as part of the root.
 +
-[WARNING]
-====
-Passwords specified on the kernel command line are visible for all users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the network, when using DHCP with DHCP root-path.
-====
+WARNING: Passwords specified on the kernel command line are visible for all
+users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the
+network, when using DHCP with DHCP root-path.
 
 iSCSI
 ~~~~~
-**root=**iscsi:[_<username>_:_<password>_[:_<reverse>_:_<password>_]@][_<servername>_]:[_<protocol>_]:[_<port>_][:[_<iscsi_iface_name>_]:[_<netdev_name>_]]:[_<LUN>_]:_<targetname>_::
+**root=**iscsi:[__<username>__:__<password>__[:__<reverse>__:__<password>__]@][__<servername>__]:[__<protocol>__]:[__<port>__][:[__<iscsi_iface_name>__]:[__<netdev_name>__]]:[__<LUN>__]:__<targetname>__::
     protocol defaults to "6", LUN defaults to "0". If the "servername" field is
     provided by BOOTP or DHCP, then that field is used in conjunction with other
     associated fields to contact the boot server in the Boot stage. However, if
@@ -501,85 +590,92 @@ iSCSI
     used in the Discovery Service stage in conjunction with other associated
     fields. See
     link:$$http://tools.ietf.org/html/rfc4173#section-5$$[rfc4173].
-    e.g.:
 +
-----
+WARNING: Passwords specified on the kernel command line are visible for all
+users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the
+network, when using DHCP with DHCP root-path.
++
+[listing]
+.Example
+--
 root=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0
-----
+--
 +
-If servername is an IPv6 address, it has to be put in brackets. e.g.:
+If servername is an IPv6 address, it has to be put in brackets:
 +
-----
+[listing]
+.Example
+--
 root=iscsi:[2001:DB8::1]::::iqn.2009-06.dracut:target0
-----
-+
-[WARNING]
-====
-Passwords specified on the kernel command line are visible for all users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the network, when using DHCP with DHCP root-path.
-====
+--
 
-**root=**_???_ **netroot=**iscsi:[_<username>_:_<password>_[:_<reverse>_:_<password>_]@][_<servername>_]:[_<protocol>_]:[_<port>_][:[_<iscsi_iface_name>_]:[_<netdev_name>_]]:[_<LUN>_]:_<targetname>_ ...::
-    multiple netroot options allow setting up multiple iscsi disks. e.g.:
+**root=**__???__ **netroot=**iscsi:[__<username>__:__<password>__[:__<reverse>__:__<password>__]@][__<servername>__]:[__<protocol>__]:[__<port>__][:[__<iscsi_iface_name>__]:[__<netdev_name>__]]:[__<LUN>__]:__<targetname>__ ...::
+    multiple netroot options allow setting up multiple iscsi disks:
 +
-----
+[listing]
+.Example
+--
 root=UUID=12424547
 netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0
 netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target1
-----
+--
 +
-If servername is an IPv6 address, it has to be put in brackets. e.g.:
+If servername is an IPv6 address, it has to be put in brackets:
 +
-----
+[listing]
+.Example
+--
 netroot=iscsi:[2001:DB8::1]::::iqn.2009-06.dracut:target0
-----
+--
 +
-[WARNING]
-====
-Passwords specified on the kernel command line are visible for all users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the network, when using DHCP with DHCP root-path. You may want to use rd.iscsi.firmware.
-====
+WARNING: Passwords specified on the kernel command line are visible for all
+users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the
+network, when using DHCP with DHCP root-path.
+You may want to use rd.iscsi.firmware.
 
-**root=**_???_ **rd.iscsi.initiator=**_<initiator>_ **rd.iscsi.target.name=**_<target name>_  **rd.iscsi.target.ip=**_<target ip>_ **rd.iscsi.target.port=**_<target port>_ **rd.iscsi.target.group=**_<target group>_ **rd.iscsi.username=**_<username>_ **rd.iscsi.password=**_<password>_ **rd.iscsi.in.username=**_<in username>_ **rd.iscsi.in.password=**_<in password>_::
+**root=**__???__ **rd.iscsi.initiator=**__<initiator>__ **rd.iscsi.target.name=**__<target name>__  **rd.iscsi.target.ip=**__<target ip>__ **rd.iscsi.target.port=**__<target port>__ **rd.iscsi.target.group=**__<target group>__ **rd.iscsi.username=**__<username>__ **rd.iscsi.password=**__<password>__ **rd.iscsi.in.username=**__<in username>__ **rd.iscsi.in.password=**__<in password>__::
     manually specify all iscsistart parameter (see **+iscsistart --help+**)
 +
-[WARNING]
-====
-Passwords specified on the kernel command line are visible for all users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the network, when using DHCP with DHCP root-path. You may want to use rd.iscsi.firmware.
-====
+WARNING: Passwords specified on the kernel command line are visible for all
+users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the
+network, when using DHCP with DHCP root-path.
+You may want to use rd.iscsi.firmware.
 
 **root=**_???_ **netroot=**iscsi **rd.iscsi.firmware=1**::
  will read the iscsi parameter from the BIOS firmware
 
-**rd.iscsi.param=**_<param>_::
+**rd.iscsi.param=**__<param>__::
     <param> will be passed as "--param <param>" to iscsistart.
     This parameter can be specified multiple times.
-    e.g.:
 +
-----
+[listing]
+.Example
+--
 "netroot=iscsi rd.iscsi.firmware=1 rd.iscsi.param=node.session.timeo.replacement_timeout=30"
-----
+--
 +
 will result in
 +
-----
+[listing]
+--
 iscsistart -b --param node.session.timeo.replacement_timeout=30
-----
+--
 
 FCoE
 ~~~~
-**fcoe=**_<edd|interface|MAC>_:_{dcb|nodcb}_::
+**fcoe=**__<edd|interface|MAC>__:__{dcb|nodcb}__::
     Try to connect to a FCoE SAN through the NIC specified by _<interface>_ or
     _<MAC>_ or EDD settings. For the second argument, currently only nodcb is
     supported. This parameter can be specified multiple times.
 +
-[NOTE]
-letters in the MAC-address must be lowercase!
+NOTE: letters in the MAC-address must be lowercase!
 
 NBD
 ~~~
-**root=**??? **netroot=**nbd:_<server>_:_<port>_[:_<fstype>_[:_<mountopts>_[:_<nbdopts>_]]]::
+**root=**??? **netroot=**nbd:__<server>__:__<port>__[:__<fstype>__[:__<mountopts>__[:__<nbdopts>__]]]::
     mount nbd share from <server>
 
-**root=dhcp** with **dhcp** **root-path=**nbd:_<server>_:_<port>_[:_<fstype>_[:_<mountopts>_[:_<nbdopts>_]]]::
+**root=dhcp** with **dhcp** **root-path=**nbd:__<server>__:__<port>__[:__<fstype>__[:__<mountopts>__[:__<nbdopts>__]]]::
     root=dhcp alone directs initrd to look at the DHCP root-path where NBD
     options can be specified. This syntax is only usable in cases where you are
     directly mounting the volume as the rootfs.
@@ -591,25 +687,29 @@ DASD
 
 ZFCP
 ~~~~
-**rd.zfcp=**_<zfcp adaptor device bus ID>_,_<WWPN>_,_<FCPLUN>_::
-    rd.zfcp can be specified multiple times on the kernel command line. e.g.: 
+**rd.zfcp=**__<zfcp adaptor device bus ID>__,__<WWPN>__,__<FCPLUN>__::
+    rd.zfcp can be specified multiple times on the kernel command line.
 +
-----
+[listing]
+.Example
+--
 rd.zfcp=0.0.4000,0x5005076300C213e9,0x5022000000000000
-----
+--
 
 **rd.zfcp.conf=0**::
     ignore zfcp.conf included in the initramfs
 
 ZNET
 ~~~~
-**rd.znet=**_<nettype>_,_<subchannels>_,_<options>_::
-    rd.znet can be specified multiple times on the kernel command line. e.g.: 
+**rd.znet=**__<nettype>__,__<subchannels>__,__<options>__::
+    rd.znet can be specified multiple times on the kernel command line.
 +
-----
+[listing]
+.Example
+--
 rd.znet=qeth,0.0.0600,0.0.0601,0.0.0602,layer2=1,portname=foo
 rd.znet=ctc,0.0.0600,0.0.0601,protocol=bar
-----
+--
 
 Plymouth Boot Splash
 ~~~~~~~~~~~~~~~~~~~~
@@ -621,37 +721,46 @@ Plymouth Boot Splash
 
 Kernel keys
 ~~~~~~~~~~~
-**masterkey=**_<kernel master key path name>_::
-    Set the path name of the kernel master key. e.g.: 
+**masterkey=**__<kernel master key path name>__::
+    Set the path name of the kernel master key.
 +
-----
+[listing]
+.Example
+--
 masterkey=/etc/keys/kmk-trusted.blob
-----
+--
 
-**masterkeytype=**_<kernel master key type>_::
-    Set the type of the kernel master key. e.g.: 
+**masterkeytype=**__<kernel master key type>__::
+    Set the type of the kernel master key.
 +
-----
+[listing]
+.Example
+--
 masterkeytype=trusted
-----
+--
 
-**evmkey=**_<EVM key path name>_::
-    Set the path name of the EVM key. e.g.: 
+**evmkey=**__<EVM key path name>__::
+    Set the path name of the EVM key.
 +
-----
+[listing]
+.Example
+--
 evmkey=/etc/keys/evm-trusted.blob
-----
+--
 
-**ecryptfskey=**_<eCryptfs key path name>_::
-    Set the path name of the eCryptfs key. e.g.: 
+**ecryptfskey=**__<eCryptfs key path name>__::
+    Set the path name of the eCryptfs key.
 +
-----
+[listing]
+.Example
+--
 ecryptfskey=/etc/keys/ecryptfs-trusted.blob
-----
+--
 
 Deprecated, renamed Options
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Here is a list of options, which were used in dracut prior to version 008, and their new replacement.
+Here is a list of options, which were used in dracut prior to version 008, and
+their new replacement.
 
 rdbreak:: rd.break
 
@@ -785,7 +894,8 @@ _/etc/conf.d/_::
     set in the configuration files.
 
 _/etc/cmdline_::
-    Can contain additional command line options. Deprecated, better use /etc/cmdline.d/*.conf.
+    Can contain additional command line options. Deprecated, better use
+    /etc/cmdline.d/*.conf.
 
 _/etc/cmdline.d/*.conf_::
     Can contain additional command line options.

dracut.conf.5.asc

@@ -10,17 +10,19 @@ dracut.conf - configuration file(s) for dracut
 
 SYNOPSIS
 --------
-_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_  _/usr/lib/dracut/dracut.conf.d/*.conf_
+_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_
+_/usr/lib/dracut/dracut.conf.d/*.conf_
 
 Description
 -----------
 _dracut.conf_ is loaded during the initialisation phase of dracut. Command line
 parameter will overwrite any values set here.
 
-_*.conf_ files are read from /usr/lib/dracut/dracut.conf.d and /etc/dracut.conf.d.
-Files with the same name in /etc/dracut.conf.d will replace files in /usr/lib/dracut/dracut.conf.d.
-The files are then read in alphanumerical order and will overwrite parameters set in
-_/etc/dracut.conf_. Each line specifies an attribute and a value. A '#'
+_*.conf_ files are read from /usr/lib/dracut/dracut.conf.d and
+/etc/dracut.conf.d. Files with the same name in /etc/dracut.conf.d will replace
+files in /usr/lib/dracut/dracut.conf.d.
+The files are then read in alphanumerical order and will overwrite parameters
+set in _/etc/dracut.conf_. Each line specifies an attribute and a value. A '#'
 indicates the beginning of a comment; following characters, up to the end of the
 line are not interpreted.
 
@@ -67,16 +69,28 @@ Configuration files must have the extension .conf; other extensions are ignored.
 *do_strip=*"__{yes|no}__"::
     Strip binaries in the initramfs (default=yes)
 
+*do_prelink=*"__{yes|no}__"::
+    Prelink binaries in the initramfs (default=yes)
+
 *hostonly=*"__{yes|no}__"::
     Host-Only mode: Install only what is needed for booting the local host
     instead of a generic host and generate host-specific configuration.
 
+*hostonly_cmdline*"__{yes|no}__"::
+    If set, store the kernel command line arguments needed in the initramfs
+
+*persistent_policy=*"__<policy>__"::
+    Use _<policy>_ to address disks and partitions.
+    _<policy>_ can be any directory name found in /dev/disk.
+    E.g. "by-uuid", "by-label"
+
 *tmpdir=*"__<temporary directory>__"::
     Specify temporary directory to use.
 
 [WARNING]
 ====
-If chrooted to another root other than the real root device, use --fstab and provide a valid _/etc/fstab_.
+If chrooted to another root other than the real root device, use --fstab and
+provide a valid _/etc/fstab_.
 ====
 
 *use_fstab=*"__{yes|no}__"::
@@ -105,7 +119,7 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *nofscks=*"__{yes|no}__"::
     If specified, inhibit installation of any fsck tools.
 
-*ro_mnt*
+*ro_mnt=*"__{yes|no}__"::
     Mount _/_ and _/usr_ read-only by default.
 
 *kernel_cmdline=*"__parameters__"::
@@ -114,9 +128,27 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *kernel_only=*"__{yes|no}__"::
     Only install kernel drivers and firmware files. (default=no)
 
-*no_kernel=*"{yes|no}"::
+*no_kernel=*"__{yes|no}__"::
     Do not install kernel drivers and firmware files (default=no)
 
+*acpi_override=*"__{yes|no}__"::
+    [WARNING] ONLY USE THIS IF YOU KNOW WHAT YOU ARE DOING! +
+    Override BIOS provided ACPI tables. For further documentation read
+    Documentation/acpi/initrd_table_override.txt in the kernel sources.
+    Search for ACPI table files (must have .aml suffix) in acpi_table_dir=
+    directory (see below) and add them to a separate uncompressed cpio
+    archive. This cpio archive gets glued (concatenated, uncompressed one
+    must be the first one) to the compressed cpio archive. The first,
+    uncompressed cpio archive is for data which the kernel must be able
+    to access very early (and cannot make use of uncompress alogrithms yet)
+    like microcode or ACPI tables (default=no).
+
+*acpi_table_dir=*"__<dir>__"::
+    Directory to search for ACPI tables if acpi_override= is set to yes.
+
+*early_microcode=*"{yes|no}"::
+    Combine early microcode with ramdisk (default=no)
+
 *stdloglvl*="__\{0-6\}__"::
     Set logging to standard error level.
 
@@ -132,6 +164,17 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *show_modules=*"__{yes|no}__"::
     Print the name of the included modules to standard output during build.
 
+*i18n_vars="__<variable mapping>__"::
+    Distribution specific variable mapping.
+    See dracut/modules.d/10i18n/README for a detailed description.
+
+*i18n_default_font=*"__<fontname>__"::
+    The font <fontname> to install, if not specified otherwise.
+    Default is "LatArCyrHeb-16".
+
+*i18n_install_all=*"__{yes|no}__"::
+    Install everything regardless of generic or hostonly mode.
+
 Files
 -----
 _/etc/dracut.conf_::

dracut.conf.d/fedora.conf.example

@@ -3,6 +3,7 @@
 # i18n
 i18n_vars="/etc/sysconfig/keyboard:KEYTABLE-KEYMAP /etc/sysconfig/i18n:SYSFONT-FONT,FONTACM-FONT_MAP,FONT_UNIMAP"
 i18n_default_font="latarcyrheb-sun16"
+i18n_install_all="yes"
 stdloglvl=3
 sysloglvl=5
 install_items+=" vi /etc/virc ps grep cat rm "
@@ -12,3 +13,4 @@ systemdsystemunitdir=/usr/lib/systemd/system
 systemdsystemconfdir=/etc/systemd/system
 udevdir=/usr/lib/udev
 hostonly="yes"
+hostonly_cmdline="no"

dracut.modules.7.asc

@@ -0,0 +1,299 @@
+DRACUT.MODULES(7)
+=================
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+dracut.modules - dracut modules
+
+DESCRIPTION
+-----------
+
+dracut uses a modular system to build and extend the initramfs image. All
+modules are located in _/usr/lib/dracut/modules.d_ or in _<git-src>/modules.d_.
+The most basic dracut module is _99base_. In _99base_ the initial shell script
+init is defined, which gets run by the kernel after initramfs loading. Although
+you can replace init with your own version of _99base_, this is not encouraged.
+Instead you should use, if possible, the hooks of dracut. All hooks, and the
+point of time in which they are executed, are described in <<stages>>.
+
+The main script, which creates the initramfs is dracut itsself. It parses all
+arguments and sets up the directory, in which everything is installed. It then
+executes all check, install, installkernel scripts found in the modules, which
+are to be processed. After everything is installed, the install directory is
+archived and compressed to the final initramfs image. All helper functions used
+by check, install and installkernel are found in in the file _dracut-functions_.
+These shell functions are available to all module installer (install,
+installkernel) scripts, without the need to source _dracut-functions_.
+
+A module can check the preconditions for install and installkernel with the
+check script. Also dependencies can be expressed with check. If a module passed
+check, install and installkernel will be called to install all of the necessary
+files for the module. To split between kernel and non-kernel parts of the
+installation, all kernel module related parts have to be in installkernel. All
+other files found in a module directory are module specific and mostly are hook
+scripts and udev rules.
+
+
+[[stages]]
+== Boot Process Stages
+
+dracut modules can insert custom script at various points, to control the boot
+process.
+These hooks are plain directories containing shell scripts ending with ".sh",
+which are sourced by init.
+Common used functions are in _dracut-lib.sh_, which can be sourced by any script.
+
+=== Hook: cmdline
+
+The _cmdline_ hook is a place to insert scripts to parse the kernel command line
+and prepare the later actions, like setting up udev rules and configuration
+files.
+
+In this hook the most important environment variable is defined: root. The
+second one is rootok, which indicates, that a module claimed to be able to parse
+the root defined. So for example, **root=**__iscsi:....__ will be claimed by the
+iscsi dracut module, which then sets rootok.
+
+=== Hook: pre-udev
+
+This hook is executed right after the cmdline hook and a check if root and
+rootok were set. Here modules can take action with the final root, and before
+udev has been run.
+
+=== Start Udev
+
+Now udev is started and the logging for udev is setup.
+
+=== Hook: pre-trigger
+
+In this hook, you can set udev environment variables with **udevadm control
+--property=KEY=_value_** or control the further execution of udev with
+udevadm.
+
+=== Trigger Udev
+
+udev is triggered by calling udevadm trigger, which sends add events for all
+devices and subsystems.
+
+=== Main Loop
+
+In the main loop of dracut loops until udev has settled and
+all scripts in _initqueue/finished_ returned true.
+In this loop there are three hooks, where scripts can be inserted
+by calling /sbin/initqueue.
+
+==== Initqueue
+
+This hook gets executed every time a script is inserted here, regardless of the
+udev state.
+
+==== Initqueue settled
+
+This hooks (initqueue/settled) gets executed every time udev has settled.
+
+==== Initqueue timeout
+
+This hooks (initqueue/timeout) gets executed, when the main loop counter becomes
+half of the rd.retry counter.
+
+==== Initqueue finished
+
+This hook (initqueue/finished) is called after udev has settled and
+if all scripts herein return 0 the main loop will be ended.
+Abritary scripts can be added here, to loop in the
+initqueue until something happens, which a dracut module wants to wait for.
+
+=== Hook: pre-mount
+
+Before the root device is mounted all scripts in the hook pre-mount are
+executed. In some cases (e.g. NFS) the real root device is already mounted,
+though.
+
+=== Hook: mount
+
+This hook is mainly to mount the real root device.
+
+=== Hook: pre-pivot
+
+This hook is called before cleanup hook, This is a good place for
+actions other than cleanups which need to be called before pivot.
+
+=== Hook: cleanup
+
+This hook is the last hook and is called before init finally switches root to
+the real root device. This is a good place to clean up and kill processes not
+needed anymore.
+
+
+=== Cleanup and switch_root
+
+Init (or systemd) kills all udev processes, cleans up the environment,
+sets up the arguments for the real init process and finally calls switch_root.
+switch_root removes the whole filesystem hierarchy of the initramfs,
+chroot()s to the real root device and calls /sbin/init with the specified
+arguments.
+
+To ensure all files in the initramfs hierarchy can be removed, all processes
+still running from the initramfs should not have any open file descriptors left.
+
+== Network Infrastructure
+
+FIXME
+
+== Writing a Module
+
+A simple example module is _96insmodpost_, which modprobes a kernel module after
+udev has settled and the basic device drivers have been loaded.
+
+All module installation information is in the file module-setup.sh.
+
+First we create a check() function, which just exits with 0 indicating that this
+module should be included by default.
+
+check():
+----
+return 0
+----
+
+The we create the install() function, which installs a cmdline hook with
+priority number 20 called _parse-insmodpost.sh_. It also installs the
+_insmodpost.sh_ script in _/sbin_.
+
+install():
+----
+inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
+inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
+----
+
+The _pase-instmodpost.sh_ parses the kernel command line for a argument
+rd.driver.post, blacklists the module from being autoloaded and installs the
+hook _insmodpost.sh_ in the _initqueue/settled_.
+
+_parse-insmodpost.sh_:
+----
+for p in $(getargs rd.driver.post=); do
+    echo "blacklist $p" >> /etc/modprobe.d/initramfsblacklist.conf
+    _do_insmodpost=1
+done
+
+[ -n "$_do_insmodpost" ] && /sbin/initqueue --settled --unique --onetime /sbin/insmodpost.sh
+unset _do_insmodpost
+
+----
+
+_insmodpost.sh_, which is called in the _initqueue/settled_ hook will just
+modprobe the kernel modules specified in all rd.driver.post kernel command line
+parameters. It runs after udev has settled and is only called once (--onetime).
+
+_insmodpost.sh_:
+----
+. /lib/dracut-lib.sh
+
+for p in $(getargs rd.driver.post=); do
+    modprobe $p
+done
+
+----
+
+
+=== module-setup.sh: check()
+
+_check()_ is called by dracut to evaluate the inclusion of a dracut module in
+the initramfs.
+
+$hostonly:: If the $hostonly variable is set, then the module check() function
+should be in "hostonly" mode, which means, that the check() should only return
+0, if the module is really needed to boot this specific host.
+
+check() should return with:
+
+0:: Include the dracut module in the initramfs.
+
+1:: Do not include the dracut module. The requirements are not fullfilled
+(missing tools, etc.)
+
+255:: Only include the dracut module, if another module requires it or if
+explicitly specified in the config file or on the argument list.
+
+
+=== module-setup.sh: depends()
+
+The function depends() should echo all other dracut module names the module
+depends on.
+
+=== module-setup.sh: cmdline()
+
+This function should print the kernel command line options needed to boot the
+current machine setup. It should start with a space and should not print a
+newline.
+
+=== module-setup.sh: install()
+
+The install() function is called to install everything non-kernel related.
+To install binaries, scripts, and other files, you can use the functions
+mentioned in <<creation>>.
+
+To address a file in the current module directory, use the variable "$moddir".
+
+=== module-setup.sh: installkernel()
+
+In installkernel() all kernel related files should be installed. You can use all
+of the functions mentioned in <<creation>> to install files.
+
+=== [[creation]]Creation Functions
+
+==== inst_multiple [-o] <file> [ <file> ...]
+
+installs multiple binaries and files. If executables are specified without a
+path, dracut will search the path PATH=/usr/sbin:/sbin:/usr/bin:/bin for the
+binary. If the option "-o" is given as the first parameter, a missing file does
+not lead to an error.
+
+==== inst <src> [<dst>]
+
+installs _one_ file <src> either to the same place in the initramfs or to an
+optional <dst>.
+
+==== inst_hook <hookdir> <prio> <src>
+
+installs an executable/script <src> in the dracut hook <hookdir> with priority
+<prio>.
+
+==== inst_rules <udevrule> [ <udevrule> ...]
+
+installs one ore more udev rules. Non-existant udev rules are reported, but do
+not let dracut fail.
+
+==== instmods <kernelmodule> [ <kernelmodule> ... ]
+
+instmods should be used only in the installkernel() function.
+
+instmods installs one or more kernel modules in the initramfs. <kernelmodule>
+can also be a whole subsystem, if prefixed with a "=", like "=drivers/net/team".
+
+instmods will not install the kernel module, if $hostonly is set and the kernel
+module is not currently needed by any /sys/*...*/uevent MODALIAS.
+To install a kernel module regardless of the hostonly mode use the form:
+----
+hostonly='' instmods <kernelmodule>
+----
+
+=== Initramfs Functions
+
+FIXME
+
+
+=== Network Modules
+
+FIXME
+
+AUTHOR
+------
+Harald Hoyer
+
+SEE ALSO
+--------
+*dracut*(8)

dracut.sh

@@ -70,6 +70,7 @@ Creates initial ramdisk images for preloading modules
   --kver [VERSION]      Set kernel version to [VERSION].
   -f, --force           Overwrite existing initramfs file.
   -a, --add [LIST]      Add a space-separated list of dracut modules.
+  --rebuild         Append arguments to those of existing image and rebuild
   -m, --modules [LIST]  Specify a space-separated list of dracut modules to
                          call when building the initramfs. Modules are located
                          in /usr/lib/dracut/modules.d.
@@ -91,11 +92,14 @@ Creates initial ramdisk images for preloading modules
                          firmwares, separated by :
   --kernel-only         Only install kernel drivers and firmware files
   --no-kernel           Do not install kernel drivers and firmware files
+  --print-cmdline       Print the kernel command line for the given disk layout
   --early-microcode     Combine early microcode with ramdisk
   --no-early-microcode  Do not combine early microcode with ramdisk
   --kernel-cmdline [PARAMETERS] Specify default kernel command line parameters
   --strip               Strip binaries in the initramfs
   --nostrip             Do not strip binaries in the initramfs
+  --prelink             Prelink binaries in the initramfs
+  --noprelink           Do not prelink binaries in the initramfs
   --hardlink            Hardlink files in the initramfs
   --nohardlink          Do not hardlink files in the initramfs
   --prefix [DIR]        Prefix initramfs files with [DIR]
@@ -131,8 +135,16 @@ Creates initial ramdisk images for preloading modules
                          /usr/lib/dracut/modules.d.
                          Useful when running dracut from a git checkout.
   -H, --hostonly        Host-Only mode: Install only what is needed for
-                         booting the local host instead of a generic host.
+                        booting the local host instead of a generic host.
   -N, --no-hostonly     Disables Host-Only mode
+  --hostonly-cmdline    Store kernel command line arguments needed
+                        in the initramfs
+  --no-hostonly-cmdline Do not store kernel command line arguments needed
+                        in the initramfs
+  --persistent-policy [POLICY]
+                        Use [POLICY] to address disks and partitions.
+                        POLICY can be any directory name found in /dev/disk.
+                        E.g. "by-uuid", "by-label"
   --fstab               Use /etc/fstab to determine the root device.
   --add-fstab [FILE]    Add file to the initramfs fstab
   --mount "[DEV] [MP] [FSTYPE] [FSOPTS]"
@@ -158,6 +170,12 @@ Creates initial ramdisk images for preloading modules
   --xz                  Compress the generated initramfs using xz.
                          Make sure that your kernel has xz support compiled
                          in, otherwise you will not be able to boot.
+  --lzo                  Compress the generated initramfs using lzop.
+                         Make sure that your kernel has lzo support compiled
+                         in, otherwise you will not be able to boot.
+  --lz4                  Compress the generated initramfs using lz4.
+                         Make sure that your kernel has lz4 support compiled
+                         in, otherwise you will not be able to boot.
   --compress [COMPRESSION] Compress the generated initramfs with the
                          passed compression program.  Make sure your kernel
                          knows how to decompress the generated initramfs,
@@ -170,6 +188,7 @@ Creates initial ramdisk images for preloading modules
   --keep                Keep the temporary initramfs for debugging purposes
   --printsize           Print out the module install size
   --sshkey [SSHKEY]     Add ssh key to initramfs (use with ssh-client module)
+  --logfile [FILE]      Logfile to use (overrides configuration setting)
 
 If [LIST] has multiple arguments, then you have to put these in quotes.
 
@@ -265,125 +284,226 @@ dropindirs_sort()
     }
 }
 
+rearrange_params()
+{
+    # Workaround -i, --include taking 2 arguments
+    set -- "${@/--include/++include}"
+
+    # This prevents any long argument ending with "-i"
+    # -i, like --opt-i but I think we can just prevent that
+    set -- "${@/%-i/++include}"
+
+    TEMP=$(unset POSIXLY_CORRECT; getopt \
+        -o "a:m:o:d:I:k:c:L:fvqlHhMN" \
+        --long kver: \
+        --long add: \
+        --long force-add: \
+        --long add-drivers: \
+        --long omit-drivers: \
+        --long modules: \
+        --long omit: \
+        --long drivers: \
+        --long filesystems: \
+        --long install: \
+        --long fwdir: \
+        --long libdirs: \
+        --long fscks: \
+        --long add-fstab: \
+        --long mount: \
+        --long device: \
+        --long add-device: \
+        --long nofscks: \
+        --long ro-mnt \
+        --long kmoddir: \
+        --long conf: \
+        --long confdir: \
+        --long tmpdir: \
+        --long stdlog: \
+        --long compress: \
+        --long prefix: \
+        --long rebuild: \
+        --long force \
+        --long kernel-only \
+        --long no-kernel \
+        --long print-cmdline \
+        --long kernel-cmdline: \
+        --long strip \
+        --long nostrip \
+        --long prelink \
+        --long noprelink \
+        --long hardlink \
+        --long nohardlink \
+        --long noprefix \
+        --long mdadmconf \
+        --long nomdadmconf \
+        --long lvmconf \
+        --long nolvmconf \
+        --long debug \
+        --long profile \
+        --long sshkey: \
+        --long logfile: \
+        --long verbose \
+        --long quiet \
+        --long local \
+        --long hostonly \
+        --long host-only \
+        --long no-hostonly \
+        --long no-host-only \
+        --long hostonly-cmdline \
+        --long no-hostonly-cmdline \
+        --long persistent-policy: \
+        --long fstab \
+        --long help \
+        --long bzip2 \
+        --long lzma \
+        --long xz \
+        --long lzo \
+        --long lz4 \
+        --long no-compress \
+        --long gzip \
+        --long list-modules \
+        --long show-modules \
+        --long keep \
+        --long printsize \
+        --long regenerate-all \
+        --long noimageifnotneeded \
+        --long early-microcode \
+        --long no-early-microcode \
+        -- "$@")
+
+    if (( $? != 0 )); then
+        usage
+        exit 1
+    fi
+}
+
 verbosity_mod_l=0
 unset kernel
 unset outfile
 
-# Workaround -i, --include taking 2 arguments
-set -- "${@/--include/++include}"
+rearrange_params "$@"
+eval set -- "$TEMP"
 
-# This prevents any long argument ending with "-i"
-# -i, like --opt-i but I think we can just prevent that
-set -- "${@/%-i/++include}"
+# parse command line args to check if '--rebuild' option is present
+unset append_args_l
+unset rebuild_file
+while :
+do
+	if [ "$1" == "--" ]; then
+	    shift; break
+	fi
+	if [ "$1" == "--rebuild" ]; then
+	    append_args_l="yes"
+            rebuild_file=$2
+            if [ ! -e $rebuild_file ]; then
+                echo "Image file '$rebuild_file', for rebuild, does not exist!"
+                exit 1
+            fi
+            abs_rebuild_file=$(readlink -f "$rebuild_file") && rebuild_file="$abs_rebuild_file"
+	    shift; continue
+	fi
+	shift
+done
 
-TEMP=$(unset POSIXLY_CORRECT; getopt \
-    -o "a:m:o:d:I:k:c:L:fvqlHhMN" \
-    --long kver: \
-    --long add: \
-    --long force-add: \
-    --long add-drivers: \
-    --long omit-drivers: \
-    --long modules: \
-    --long omit: \
-    --long drivers: \
-    --long filesystems: \
-    --long install: \
-    --long fwdir: \
-    --long libdirs: \
-    --long fscks: \
-    --long add-fstab: \
-    --long mount: \
-    --long device: \
-    --long nofscks: \
-    --long ro-mnt \
-    --long kmoddir: \
-    --long conf: \
-    --long confdir: \
-    --long tmpdir: \
-    --long stdlog: \
-    --long compress: \
-    --long prefix: \
-    --long force \
-    --long kernel-only \
-    --long no-kernel \
-    --long kernel-cmdline: \
-    --long strip \
-    --long nostrip \
-    --long hardlink \
-    --long nohardlink \
-    --long noprefix \
-    --long mdadmconf \
-    --long nomdadmconf \
-    --long lvmconf \
-    --long nolvmconf \
-    --long debug \
-    --long profile \
-    --long sshkey: \
-    --long verbose \
-    --long quiet \
-    --long local \
-    --long hostonly \
-    --long host-only \
-    --long no-hostonly \
-    --long no-host-only \
-    --long fstab \
-    --long help \
-    --long bzip2 \
-    --long lzma \
-    --long xz \
-    --long no-compress \
-    --long gzip \
-    --long list-modules \
-    --long show-modules \
-    --long keep \
-    --long printsize \
-    --long regenerate-all \
-    --long noimageifnotneeded \
-    -- "$@")
+# get output file name and kernel version from command line arguments
+while (($# > 0)); do
+    case ${1%%=*} in
+        ++include)
+            shift 2;;
+        *)
+            if ! [[ ${outfile+x} ]]; then
+                outfile=$1
+            elif ! [[ ${kernel+x} ]]; then
+                kernel=$1
+            else
+                printf "\nUnknown arguments: %s\n\n" "$*" >&2
+                usage; exit 1;
+            fi
+            ;;
+    esac
+    shift
+done
 
-if (( $? != 0 )); then
-    usage
-    exit 1
+# extract input image file provided with rebuild option to get previous parameters, if any
+if [[ $append_args_l == "yes" ]]; then
+    unset rebuild_param
+
+    # determine resultant file
+    if ! [[ $outfile ]]; then
+        outfile=$rebuild_file
+    fi
+
+    if ! rebuild_param=$(lsinitrd $rebuild_file '*lib/dracut/build-parameter.txt'); then
+        echo "Image '$rebuild_file' has no rebuild information stored"
+        exit 1
+    fi
+
+    # prepend previous parameters to current command line args
+    if [[ $rebuild_param ]]; then
+        TEMP="$rebuild_param $TEMP"
+        eval set -- "$TEMP"
+        rearrange_params "$@"
+    fi
+
+    # clean the temporarily used scratch-pad directory
+    rm -rf $scratch_dir
 fi
 
+unset PARMS_TO_STORE
+PARMS_TO_STORE=""
+
 eval set -- "$TEMP"
 
 while :; do
+    if [ $1 != "--" ] && [ $1 != "--rebuild" ]; then
+        PARMS_TO_STORE+=" $1";
+    fi
     case $1 in
-        --kver)        kernel="$2"; shift;;
-        -a|--add)      push add_dracutmodules_l  "$2"; shift;;
-        --force-add)   push force_add_dracutmodules_l  "$2"; shift;;
-        --add-drivers) push add_drivers_l        "$2"; shift;;
-        --omit-drivers) push omit_drivers_l      "$2"; shift;;
-        -m|--modules)  push dracutmodules_l      "$2"; shift;;
-        -o|--omit)     push omit_dracutmodules_l "$2"; shift;;
-        -d|--drivers)  push drivers_l            "$2"; shift;;
-        --filesystems) push filesystems_l        "$2"; shift;;
-        -I|--install)  push install_items_l      "$2"; shift;;
-        --fwdir)       push fw_dir_l             "$2"; shift;;
-        --libdirs)     push libdirs_l            "$2"; shift;;
-        --fscks)       push fscks_l              "$2"; shift;;
-        --add-fstab)   push add_fstab_l          "$2"; shift;;
-        --mount)       push fstab_lines          "$2"; shift;;
+        --kver)        kernel="$2";                    PARMS_TO_STORE+=" '$2'"; shift;;
+        -a|--add)      push add_dracutmodules_l  "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --force-add)   push force_add_dracutmodules_l  "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --add-drivers) push add_drivers_l        "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --omit-drivers) push omit_drivers_l      "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        -m|--modules)  push dracutmodules_l      "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        -o|--omit)     push omit_dracutmodules_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        -d|--drivers)  push drivers_l            "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --filesystems) push filesystems_l        "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        -I|--install)  push install_items_l      "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --fwdir)       push fw_dir_l             "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --libdirs)     push libdirs_l            "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --fscks)       push fscks_l              "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --add-fstab)   push add_fstab_l          "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --mount)       push fstab_lines          "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         --add-device|--device)
-                       push add_device_l         "$2"; shift;;
-        --kernel-cmdline) push kernel_cmdline_l  "$2"; shift;;
+                       push add_device_l         "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --kernel-cmdline) push kernel_cmdline_l  "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         --nofscks)     nofscks_l="yes";;
         --ro-mnt)      ro_mnt_l="yes";;
-        -k|--kmoddir)  drivers_dir_l="$2"; shift;;
-        -c|--conf)     conffile="$2"; shift;;
-        --confdir)     confdir="$2"; shift;;
-        --tmpdir)      tmpdir_l="$2"; shift;;
-        -L|--stdlog)   stdloglvl_l="$2"; shift;;
-        --compress)    compress_l="$2"; shift;;
-        --prefix)      prefix_l="$2"; shift;;
+        -k|--kmoddir)  drivers_dir_l="$2";             PARMS_TO_STORE+=" '$2'"; shift;;
+        -c|--conf)     conffile="$2";                  PARMS_TO_STORE+=" '$2'"; shift;;
+        --confdir)     confdir="$2";                   PARMS_TO_STORE+=" '$2'"; shift;;
+        --tmpdir)      tmpdir_l="$2";                  PARMS_TO_STORE+=" '$2'"; shift;;
+        -L|--stdlog)   stdloglvl_l="$2";               PARMS_TO_STORE+=" '$2'"; shift;;
+        --compress)    compress_l="$2";                PARMS_TO_STORE+=" '$2'"; shift;;
+        --prefix)      prefix_l="$2";                  PARMS_TO_STORE+=" '$2'"; shift;;
+        --rebuild)     if [ $rebuild_file == $outfile ]; then
+                           force=yes
+                       fi
+                       shift
+                       ;;
         -f|--force)    force=yes;;
         --kernel-only) kernel_only="yes"; no_kernel="no";;
         --no-kernel)   kernel_only="no"; no_kernel="yes";;
-        --early-microcode) early_microcode="yes";;
-        --no-early-microcode) early_microcode="no";;
+        --print-cmdline)
+                       print_cmdline="yes"; hostonly_l="yes"; kernel_only="yes"; no_kernel="yes";;
+        --early-microcode)
+                       early_microcode_l="yes";;
+        --no-early-microcode)
+                       early_microcode_l="no";;
         --strip)       do_strip_l="yes";;
         --nostrip)     do_strip_l="no";;
+        --prelink)     do_prelink_l="yes";;
+        --noprelink)   do_prelink_l="no";;
         --hardlink)    do_hardlink_l="yes";;
         --nohardlink)  do_hardlink_l="no";;
         --noprefix)    prefix_l="/";;
@@ -393,7 +513,8 @@ while :; do
         --nolvmconf)   lvmconf_l="no";;
         --debug)       debug="yes";;
         --profile)     profile="yes";;
-        --sshkey)      sshkey="$2"; shift;;
+        --sshkey)      sshkey="$2";                    PARMS_TO_STORE+=" '$2'"; shift;;
+        --logfile)     logfile_l="$2"; shift;;
         -v|--verbose)  ((verbosity_mod_l++));;
         -q|--quiet)    ((verbosity_mod_l--));;
         -l|--local)
@@ -405,13 +526,21 @@ while :; do
                        hostonly_l="yes" ;;
         -N|--no-hostonly|--no-host-only)
                        hostonly_l="no" ;;
+        --hostonly-cmdline)
+                       hostonly_cmdline_l="yes" ;;
+        --no-hostonly-cmdline)
+                       hostonly_cmdline_l="no" ;;
+        --persistent-policy)
+                       persistent_policy_l="$2";       PARMS_TO_STORE+=" '$2'"; shift;;
         --fstab)       use_fstab_l="yes" ;;
         -h|--help)     long_usage; exit 1 ;;
-        -i|--include)  push include_src "$2"
+        -i|--include)  push include_src "$2";          PARMS_TO_STORE+=" '$2'";
                        shift;;
         --bzip2)       compress_l="bzip2";;
         --lzma)        compress_l="lzma";;
         --xz)          compress_l="xz";;
+        --lzo)         compress_l="lzo";;
+        --lz4)         compress_l="lz4";;
         --no-compress) _no_compress_l="cat";;
         --gzip)        compress_l="gzip";;
         --list-modules) do_list="yes";;
@@ -435,21 +564,12 @@ done
 # the old fashioned way
 
 while (($# > 0)); do
-    case ${1%%=*} in
-        ++include) push include_src "$2"
-                       push include_target "$3"
-                       shift 2;;
-        *)
-            if ! [[ ${outfile+x} ]]; then
-                outfile=$1
-            elif ! [[ ${kernel+x} ]]; then
-                kernel=$1
-            else
-                printf "\nUnknown arguments: %s\n\n" "$*" >&2
-                usage; exit 1;
-            fi
-            ;;
-    esac
+    if [ "${1%%=*}" == "++include" ]; then
+        push include_src "$2"
+        push include_target "$3"
+        PARMS_TO_STORE+=" --include '$2' '$3'"
+        shift 2
+    fi
     shift
 done
 
@@ -473,7 +593,7 @@ if [[ $regenerate_all == "yes" ]]; then
 
     cd /lib/modules
     for i in *; do
-        [[ -f $i/modules.builtin ]] || continue
+        [[ -f $i/modules.dep ]] || [[ -f $i/modules.dep.bin ]] || continue
         dracut --kver="$i" "${dracut_args[@]}"
         ((ret+=$?))
     done
@@ -484,6 +604,12 @@ if ! [[ $kernel ]]; then
     kernel=$(uname -r)
 fi
 
+if [[ $kernel ]]; then
+    if ! [[ -d /lib/modules/$kernel ]] && [[ $no_kernel != yes ]]; then
+        printf -- "Kernel version $kernel has no module directory /lib/modules/$kernel\n" >&2
+    fi
+fi
+
 if ! [[ $outfile ]]; then
     [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
 
@@ -499,7 +625,7 @@ for i in /usr/sbin /sbin /usr/bin /bin; do
     if [ -L "$i" ]; then
         rl=$(readlink -f $i)
     fi
-    if [[ "$NPATH" != "*:$rl*" ]] ; then
+    if [[ "$NPATH" != *:$rl* ]] ; then
         NPATH+=":$rl"
     fi
 done
@@ -510,6 +636,7 @@ export LC_ALL=C
 export LANG=C
 unset NPATH
 unset LD_LIBRARY_PATH
+unset LD_PRELOAD
 unset GREP_OPTIONS
 
 export DRACUT_LOG_LEVEL=warning
@@ -634,11 +761,15 @@ stdloglvl=$((stdloglvl + verbosity_mod_l))
 [[ $drivers_dir_l ]] && drivers_dir=$drivers_dir_l
 [[ $do_strip_l ]] && do_strip=$do_strip_l
 [[ $do_strip ]] || do_strip=yes
+[[ $do_prelink_l ]] && do_prelink=$do_prelink_l
+[[ $do_prelink ]] || do_prelink=yes
 [[ $do_hardlink_l ]] && do_hardlink=$do_hardlink_l
 [[ $do_hardlink ]] || do_hardlink=yes
 [[ $prefix_l ]] && prefix=$prefix_l
 [[ $prefix = "/" ]] && unset prefix
 [[ $hostonly_l ]] && hostonly=$hostonly_l
+[[ $hostonly_cmdline_l ]] && hostonly_cmdline=$hostonly_cmdline_l
+[[ $persistent_policy_l ]] && persistent_policy=$persistent_policy_l
 [[ $use_fstab_l ]] && use_fstab=$use_fstab_l
 [[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
 [[ $lvmconf_l ]] && lvmconf=$lvmconf_l
@@ -646,10 +777,14 @@ stdloglvl=$((stdloglvl + verbosity_mod_l))
 [[ $fw_dir ]] || fw_dir="/lib/firmware/updates /lib/firmware"
 [[ $tmpdir_l ]] && tmpdir="$tmpdir_l"
 [[ $tmpdir ]] || tmpdir=/var/tmp
+[[ $INITRD_COMPRESS ]] && compress=$INITRD_COMPRESS
 [[ $compress_l ]] && compress=$compress_l
 [[ $show_modules_l ]] && show_modules=$show_modules_l
 [[ $nofscks_l ]] && nofscks="yes"
 [[ $ro_mnt_l ]] && ro_mnt="yes"
+[[ $early_microcode_l ]] && early_microcode=$early_microcode_l
+[[ $early_microcode ]] || early_microcode=no
+[[ $logfile_l ]] && logfile="$logfile_l"
 # eliminate IFS hackery when messing with fw_dir
 fw_dir=${fw_dir//:/ }
 
@@ -657,9 +792,11 @@ fw_dir=${fw_dir//:/ }
 [[ $compress ]] || compress="gzip"
 case $compress in
     bzip2) compress="bzip2 -9";;
-    lzma)  compress="lzma -9";;
-    xz)    compress="xz --check=crc32 --lzma2=dict=1MiB";;
+    lzma)  compress="lzma -9 -T0";;
+    xz)    compress="xz --check=crc32 --lzma2=dict=1MiB -T0";;
     gzip)  compress="gzip -9"; command -v pigz > /dev/null 2>&1 && compress="pigz -9";;
+    lzo)   compress="lzop -9";;
+    lz4)   compress="lz4 -l -9";;
 esac
 if [[ $_no_compress_l = "cat" ]]; then
     compress="cat"
@@ -671,23 +808,22 @@ fi
 readonly TMPDIR="$tmpdir"
 readonly initdir="$(mktemp --tmpdir="$TMPDIR/" -d -t initramfs.XXXXXX)"
 [ -d "$initdir" ] || {
-    printf "%s\n" "dracut: mktemp --tmpdir=\"$TMPDIR/\" -d -t initramfs.XXXXXX failed." >&2
+    printf "%s\n" "dracut: mktemp --tmpdir='$TMPDIR/' -d -t initramfs.XXXXXX failed." >&2
     exit 1
 }
 
-if [[ $early_microcode = yes ]]; then
-    readonly microcode_dir="$(mktemp --tmpdir="$TMPDIR/" -d -t early_microcode.XXXXXX)"
-    [ -d "$microcode_dir" ] || {
-        printf "%s\n" "dracut: mktemp --tmpdir=\"$TMPDIR/\" -d -t early_microcode.XXXXXX failed." >&2
+if [[ $early_microcode = yes ]] || ( [[ $acpi_override = yes ]] && [[ -d $acpi_table_dir ]] ); then
+    readonly early_cpio_dir="$(mktemp --tmpdir="$TMPDIR/" -d -t early_cpio.XXXXXX)"
+    [ -d "$early_cpio_dir" ] || {
+        printf "%s\n" "dracut: mktemp --tmpdir='$TMPDIR/' -d -t early_cpio.XXXXXX failed." >&2
         exit 1
     }
 fi
 # clean up after ourselves no matter how we die.
 trap '
     ret=$?;
-    [[ $outfile ]] && [[ -f $outfile.$$ ]] && rm -f -- "$outfile.$$";
     [[ $keep ]] && echo "Not removing $initdir." >&2 || { [[ $initdir ]] && rm -rf -- "$initdir"; };
-    [[ $keep ]] && echo "Not removing $microcode_dir." >&2 || { [[ $microcode_dir ]] && rm -Rf -- "$microcode_dir"; };
+    [[ $keep ]] && echo "Not removing $early_cpio_dir." >&2 || { [[ $early_cpio_dir ]] && rm -Rf -- "$early_cpio_dir"; };
     [[ $_dlogdir ]] && rm -Rf -- "$_dlogdir";
     exit $ret;
     ' EXIT
@@ -707,12 +843,14 @@ else
     exit 1
 fi
 
-inst /bin/sh
-if ! $DRACUT_INSTALL ${initdir+-D "$initdir"} -R "$initdir/bin/sh" &>/dev/null; then
-    unset DRACUT_RESOLVE_LAZY
-    export DRACUT_RESOLVE_DEPS=1
+if ! [[ $print_cmdline ]]; then
+    inst /bin/sh
+    if ! $DRACUT_INSTALL ${initdir:+-D "$initdir"} -R "$initdir/bin/sh" &>/dev/null; then
+        unset DRACUT_RESOLVE_LAZY
+        export DRACUT_RESOLVE_DEPS=1
+    fi
+    rm -fr -- ${initdir}/*
 fi
-rm -fr -- ${initdir}/*
 
 if [[ -f $dracutbasedir/dracut-version.sh ]]; then
     . $dracutbasedir/dracut-version.sh
@@ -794,23 +932,25 @@ if [[ -d $srcmods ]]; then
     }
 fi
 
-if [[ -f $outfile && ! $force ]]; then
-    dfatal "Will not override existing initramfs ($outfile) without --force"
-    exit 1
-fi
+if [[ ! $print_cmdline ]]; then
+    if [[ -f $outfile && ! $force ]]; then
+        dfatal "Will not override existing initramfs ($outfile) without --force"
+        exit 1
+    fi
 
-outdir=${outfile%/*}
-[[ $outdir ]] || outdir="/"
+    outdir=${outfile%/*}
+    [[ $outdir ]] || outdir="/"
 
-if [[ ! -d "$outdir" ]]; then
-    dfatal "Can't write to $outdir: Directory $outdir does not exist or is not accessible."
-    exit 1
-elif [[ ! -w "$outdir" ]]; then
-    dfatal "No permission to write to $outdir."
-    exit 1
-elif [[ -f "$outfile" && ! -w "$outfile" ]]; then
-    dfatal "No permission to write $outfile."
-    exit 1
+    if [[ ! -d "$outdir" ]]; then
+        dfatal "Can't write to $outdir: Directory $outdir does not exist or is not accessible."
+        exit 1
+    elif [[ ! -w "$outdir" ]]; then
+        dfatal "No permission to write to $outdir."
+        exit 1
+    elif [[ -f "$outfile" && ! -w "$outfile" ]]; then
+        dfatal "No permission to write $outfile."
+        exit 1
+    fi
 fi
 
 # Need to be able to have non-root users read stuff (rpcbind etc)
@@ -823,10 +963,6 @@ if [[ $hostonly ]]; then
             unset hostonly
         fi
     done
-    if ! [[ -d /run/udev/data ]]; then
-        dwarning "Turning off host-only mode: udev database not found!"
-        unset hostonly
-    fi
 fi
 
 declare -A host_fs_types
@@ -867,12 +1003,22 @@ if [[ $hostonly ]]; then
         "/sbin" \
         "/lib" \
         "/lib64" \
-        "/boot";
+        "/usr" \
+        "/usr/bin" \
+        "/usr/sbin" \
+        "/usr/lib" \
+        "/usr/lib64" \
+        "/boot" \
+        "/boot/efi" \
+        ;
     do
         mp=$(readlink -f "$mp")
         mountpoint "$mp" >/dev/null 2>&1 || continue
-        _dev="$(readlink -f "/dev/block/$(find_block_device "$mp")")"
-        [[ "$_mp" == "/" ]] && root_dev="$_dev"
+        _dev=$(find_block_device "$mp")
+        _bdev=$(readlink -f "/dev/block/$_dev")
+        [[ -b $_bdev ]] && _dev=$_bdev
+        push host_devs $_dev
+        [[ "$mp" == "/" ]] && root_dev="$_dev"
         push host_devs "$_dev"
     done
 
@@ -884,10 +1030,10 @@ if [[ $hostonly ]]; then
             while read _d _m _t _o _r; do
                 [[ "$_d" == \#* ]] && continue
                 [[ $_d ]] || continue
-                [[ $_t != "swap" ]] || [[ $_m != "swap" ]] && continue
+                [[ $_t != "swap" ]] && continue
+                [[ $_m != "swap" ]] && [[ $_m != "none" ]] && continue
                 [[ "$_o" == *noauto* ]] && continue
-                [[ "$_d" == UUID\=* ]] && _d="/dev/disk/by-uuid/${_d#UUID=}"
-                [[ "$_d" == LABEL\=* ]] && _d="/dev/disk/by-label/$_d#LABEL=}"
+                _d=$(expand_persistent_dev "$_d")
                 [[ "$_d" -ef "$dev" ]] || continue
 
                 if [[ -f /etc/crypttab ]]; then
@@ -895,7 +1041,9 @@ if [[ $hostonly ]]; then
                         [[ $_mapper = \#* ]] && continue
                         [[ "$_d" -ef /dev/mapper/"$_mapper" ]] || continue
                         [[ "$_o" ]] || _o="$_p"
-                # skip mkswap swap
+                        # skip entries with password files
+                        [[ "$_p" == /* ]] && [[ -f $_p ]] && continue 2
+                        # skip mkswap swap
                         [[ $_o == *swap* ]] && continue 2
                     done < /etc/crypttab
                 fi
@@ -905,16 +1053,42 @@ if [[ $hostonly ]]; then
             done < /etc/fstab
         done < /proc/swaps
     fi
+    # record all host modaliases
+    declare -A host_modalias
+    find  /sys/devices/ -name uevent -print > "$initdir/.modalias"
+    while read m; do
+        while read line; do
+            [[ "$line" != MODALIAS\=* ]] && continue
+            modalias="${line##MODALIAS=}" && [[ $modalias ]] && host_modalias["$modalias"]=1
+            break
+        done < "$m"
+    done < "$initdir/.modalias"
+
+    rm -f -- "$initdir/.modalias"
+
+    while read _k _s _v; do
+        [ "$_k" != "name" -a "$_k" != "driver" ] && continue
+        host_modalias["$_v"]=1
+    done </proc/crypto
+
+    # check /proc/modules
+    declare -A host_modules
+    while read m rest; do
+        host_modules["$m"]=1
+    done </proc/modules
 fi
 
+unset m
+unset rest
+
 _get_fs_type() {
     [[ $1 ]] || return
-    if [[ -b /dev/block/$1 ]] && ID_FS_TYPE=$(get_fs_env "/dev/block/$1"); then
-        host_fs_types["$(readlink -f "/dev/block/$1")"]="$ID_FS_TYPE"
+    if [[ -b /dev/block/$1 ]]; then
+        ID_FS_TYPE=$(get_fs_env "/dev/block/$1") && host_fs_types["$(readlink -f "/dev/block/$1")"]="$ID_FS_TYPE"
         return 1
     fi
-    if [[ -b $1 ]] && ID_FS_TYPE=$(get_fs_env "$1"); then
-        host_fs_types["$(readlink -f "$1")"]="$ID_FS_TYPE"
+    if [[ -b $1 ]]; then
+        ID_FS_TYPE=$(get_fs_env "$1") && host_fs_types["$(readlink -f "$1")"]="$ID_FS_TYPE"
         return 1
     fi
     if fstype=$(find_dev_fstype "$1"); then
@@ -929,6 +1103,22 @@ for dev in ${host_devs[@]}; do
     check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")"
 done
 
+for dev in "${!host_fs_types[@]}"; do
+    [[ ${host_fs_types[$dev]} = "reiserfs" ]] || [[ ${host_fs_types[$dev]} = "xfs" ]] || continue
+    rootopts=$(find_dev_fsopts "$dev")
+    if [[ ${host_fs_types[$dev]} = "reiserfs" ]]; then
+        journaldev=$(fs_get_option $rootopts "jdev")
+    elif [[ ${host_fs_types[$dev]} = "xfs" ]]; then
+        journaldev=$(fs_get_option $rootopts "logdev")
+    fi
+    if [[ $journaldev ]]; then
+        dev="$(readlink -f "$dev")"
+        push host_devs "$dev"
+        _get_fs_type "$dev"
+        check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")"
+    fi
+done
+
 [[ -d $udevdir ]] \
     || udevdir="$(pkg-config udev --variable=udevdir 2>/dev/null)"
 if ! [[ -d "$udevdir" ]]; then
@@ -961,7 +1151,28 @@ export initdir dracutbasedir dracutmodules \
     stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \
     debug host_fs_types host_devs sshkey add_fstab \
     DRACUT_VERSION udevdir prefix filesystems drivers \
-    systemdutildir systemdsystemunitdir systemdsystemconfdir
+    systemdutildir systemdsystemunitdir systemdsystemconfdir \
+    host_modalias host_modules hostonly_cmdline
+
+mods_to_load=""
+# check all our modules to see if they should be sourced.
+# This builds a list of modules that we will install next.
+for_each_module_dir check_module
+for_each_module_dir check_mount
+
+dracut_module_included "fips" && export DRACUT_FIPS_MODE=1
+
+if [[ $print_cmdline ]]; then
+    modules_loaded=" "
+    # source our modules.
+    for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
+        _d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]}
+        module_cmdline "$_d_mod"
+    done
+    unset moddir
+    printf "\n"
+    exit 0
+fi
 
 # Create some directory structure first
 [[ $prefix ]] && mkdir -m 0755 -p "${initdir}${prefix}"
@@ -986,7 +1197,7 @@ if [[ $kernel_only != yes ]]; then
         fi
     done
 
-    for d in dev proc sys sysroot root run run/lock run/initramfs; do
+    for d in dev proc sys sysroot root run; do
         if [ -L "/$d" ]; then
             inst_symlink "/$d"
         else
@@ -1020,14 +1231,6 @@ if [[ $kernel_only != yes ]]; then
     fi
 fi
 
-mods_to_load=""
-# check all our modules to see if they should be sourced.
-# This builds a list of modules that we will install next.
-for_each_module_dir check_module
-for_each_module_dir check_mount
-
-[[ "$mods_to_load " == *01fips\ * ]] && export DRACUT_FIPS_MODE=1
-
 _isize=0 #initramfs size
 modules_loaded=" "
 # source our modules.
@@ -1104,12 +1307,16 @@ if [[ $no_kernel != yes ]]; then
 fi
 
 if [[ $kernel_only != yes ]]; then
-    (( ${#install_items[@]} > 0 )) && dracut_install ${install_items[@]}
+    (( ${#install_items[@]} > 0 )) && inst_multiple ${install_items[@]}
 
     [[ $kernel_cmdline ]] && printf "%s\n" "$kernel_cmdline" >> "${initdir}/etc/cmdline.d/01-default.conf"
 
     while pop fstab_lines line; do
-        printf "%s\n" "$line 0 0" >> "${initdir}/etc/fstab"
+        line=($line)
+        [ -z "${line[3]}" ] && line[3]="defaults"
+        [ -z "${line[4]}" ] && line[4]="0"
+        [ -z "${line[5]}" ] && line[5]="2"
+        echo "${line[@]}" >> "${initdir}/etc/fstab"
     done
 
     for f in $add_fstab; do
@@ -1130,7 +1337,7 @@ if [[ $kernel_only != yes ]]; then
         find "$initdir" -type f \
             '(' -perm -0100 -or -perm -0010 -or -perm -0001 ')' \
             -not -path '*.ko' -print0 \
-        | xargs -r -0 $DRACUT_INSTALL ${initdir+-D "$initdir"} -R ${DRACUT_FIPS_MODE+-H} --
+        | xargs -r -0 $DRACUT_INSTALL ${initdir:+-D "$initdir"} -R ${DRACUT_FIPS_MODE:+-H} --
         dinfo "*** Resolving executable dependencies done***"
     fi
 fi
@@ -1175,18 +1382,20 @@ if [[ $kernel_only != yes ]]; then
     fi
 fi
 
-PRELINK_BIN="$(command -v prelink)"
-if [[ $UID = 0 ]] && [[ $PRELINK_BIN ]]; then
-    if [[ $DRACUT_FIPS_MODE ]]; then
-        dinfo "*** Installing prelink files ***"
-        dracut_install -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf /etc/prelink.cache
-    else
-        dinfo "*** Pre-linking files ***"
-        dracut_install -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf
-        chroot "$initdir" "$PRELINK_BIN" -a
-        rm -f -- "$initdir/$PRELINK_BIN"
-        rm -fr -- "$initdir"/etc/prelink.*
-        dinfo "*** Pre-linking files done ***"
+if [[ $do_prelink == yes ]]; then
+    PRELINK_BIN="$(command -v prelink)"
+    if [[ $UID = 0 ]] && [[ $PRELINK_BIN ]]; then
+        if [[ $DRACUT_FIPS_MODE ]]; then
+            dinfo "*** Installing prelink files ***"
+            inst_multiple -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf /etc/prelink.cache
+        else
+            dinfo "*** Pre-linking files ***"
+            inst_multiple -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf
+            chroot "$initdir" "$PRELINK_BIN" -a
+            rm -f -- "$initdir/$PRELINK_BIN"
+            rm -fr -- "$initdir"/etc/prelink.*
+            dinfo "*** Pre-linking files done ***"
+        fi
     fi
 fi
 
@@ -1206,25 +1415,11 @@ if [[ $do_strip = yes ]] ; then
     done
 fi
 
-if [[ $do_strip = yes ]] ; then
+if [[ $do_strip = yes ]] && ! [[ $DRACUT_FIPS_MODE ]]; then
     dinfo "*** Stripping files ***"
-    if [[ $DRACUT_FIPS_MODE ]]; then
-        find "$initdir" -type f \
-            -executable -not -path '*/lib/modules/*.ko' -print0 \
-            | while read -r -d $'\0' f; do
-            if ! [[ -e "${f%/*}/.${f##*/}.hmac" ]] \
-                && ! [[ -e "/lib/hmaccalc/${f##*/}.hmac" ]] \
-                && ! [[ -e "/lib64/hmaccalc/${f##*/}.hmac" ]] \
-                && ! [[ -e "/lib/fipscheck/${f##*/}.hmac" ]] \
-                && ! [[ -e "/lib64/fipscheck/${f##*/}.hmac" ]]; then
-                printf "%s\000" "$f";
-            fi
-        done | xargs -r -0 strip -g 2>/dev/null
-    else
-        find "$initdir" -type f \
-            -executable -not -path '*/lib/modules/*.ko' -print0 \
-            | xargs -r -0 strip -g 2>/dev/null
-    fi
+    find "$initdir" -type f \
+        -executable -not -path '*/lib/modules/*.ko' -print0 \
+        | xargs -r -0 strip -g 2>/dev/null
 
     # strip kernel modules, but do not touch signed modules
     find "$initdir" -type f -path '*/lib/modules/*.ko' -print0 \
@@ -1239,7 +1434,7 @@ if [[ $early_microcode = yes ]]; then
     dinfo "*** Generating early-microcode cpio image ***"
     ucode_dir=(amd-ucode intel-ucode)
     ucode_dest=(AuthenticAMD.bin GenuineIntel.bin)
-    _dest_dir="$microcode_dir/d/kernel/x86/microcode"
+    _dest_dir="$early_cpio_dir/d/kernel/x86/microcode"
     _dest_idx="0 1"
     mkdir -p $_dest_dir
     if [[ $hostonly ]]; then
@@ -1254,30 +1449,57 @@ if [[ $early_microcode = yes ]]; then
                 dinfo "*** Constructing ${ucode_dest[$idx]} ****"
                 if [[ $hostonly ]]; then
                     _src=$(get_ucode_file)
+                    if ! [[ -r $_fwdir/$_fw/$_src ]];then
+                        break;
+                    fi
                 fi
                 cat $_fwdir/$_fw/$_src > $_dest_dir/${ucode_dest[$idx]}
+                create_early_cpio="yes"
             fi
         done
     done
-    (cd "$microcode_dir/d"; find . | cpio -o -H newc --quiet >../ucode.cpio)
+fi
+
+if [[ $acpi_override = yes ]] && [[ -d $acpi_table_dir ]]; then
+    dinfo "*** Packaging ACPI tables to override BIOS provided ones ***"
+    _dest_dir="$early_cpio_dir/d/kernel/firmware/acpi"
+    mkdir -p $_dest_dir
+    for table in $acpi_table_dir/*.aml; do
+        dinfo "   Adding ACPI table: $table"
+        cp $table $_dest_dir
+        create_early_cpio="yes"
+    done
+fi
+
+dinfo "*** Store current command line parameters ***"
+if ! ( echo $PARMS_TO_STORE > $initdir/lib/dracut/build-parameter.txt ); then
+    dfatal "Could not store the current command line parameters"
+    exit 1
 fi
 
 rm -f -- "$outfile"
 dinfo "*** Creating image file ***"
-if [[ $early_microcode = yes ]]; then
+
+[[ "$UID" != 0 ]] && cpio_owner_root="-R 0:0"
+
+if [[ $create_early_cpio = yes ]]; then
+    echo 1 > "$early_cpio_dir/d/early_cpio"
     # The microcode blob is _before_ the initramfs blob, not after
-    mv $microcode_dir/ucode.cpio $outfile.$$
+    (cd "$early_cpio_dir/d";     find . -print0 | cpio --null $cpio_owner_root -H newc -o --quiet > $outfile)
 fi
-if ! ( umask 077; cd "$initdir"; find . |cpio -R 0:0 -H newc -o --quiet| \
-    $compress >> "$outfile.$$"; ); then
-    dfatal "dracut: creation of $outfile.$$ failed"
+if ! ( umask 077; cd "$initdir"; find . -print0 | cpio --null $cpio_owner_root -H newc -o --quiet | \
+    $compress >> "$outfile"; ); then
+    dfatal "dracut: creation of $outfile failed"
     exit 1
 fi
-mv -- "$outfile.$$" "$outfile"
 dinfo "*** Creating image file done ***"
 
 if (( maxloglvl >= 5 )); then
-    lsinitrd "$outfile"| ddebug
+    if [[ $allowlocal ]]; then
+	"$dracutbasedir/lsinitrd.sh" "$outfile"| ddebug
+    else
+        lsinitrd "$outfile"| ddebug
+    fi
 fi
 
 exit 0

dracut.spec

@@ -1,4 +1,5 @@
 %define dracutlibdir %{_prefix}/lib/dracut
+%bcond_without doc
 
 # Variables must be defined
 %define with_nbd                1
@@ -21,14 +22,14 @@ Group: System/Base
 %endif
 
 # The entire source code is GPLv2+
-# except install/* which is LGPLv2.1+
-License: GPLv2+ and LGPLv2.1+
+# except install/* which is LGPLv2+
+License: GPLv2+ and LGPLv2+
 
 URL: https://dracut.wiki.kernel.org/
 
 # Source can be generated by
 # http://git.kernel.org/?p=boot/dracut/dracut.git;a=snapshot;h=%{version};sf=tgz
-Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.bz2
+Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.xz
 
 BuildRequires: bash git
 
@@ -45,6 +46,7 @@ BuildRequires: pkgconfig
 BuildRoot: %{_tmppath}/%{name}-%{version}-build
 %endif
 
+%if %{with doc}
 %if 0%{?fedora} || 0%{?rhel}
 BuildRequires: docbook-style-xsl docbook-dtds libxslt
 %endif
@@ -54,6 +56,8 @@ BuildRequires: docbook-style-xsl docbook-dtds libxslt
 %endif
 
 BuildRequires: asciidoc
+%endif
+
 
 %if 0%{?fedora} > 12 || 0%{?rhel}
 # no "provides", because dracut does not offer
@@ -97,16 +101,14 @@ Requires: util-linux >= 2.21
 Requires: systemd >= 199
 Requires: procps-ng
 Conflicts: grubby < 8.23
+Conflicts: initscripts < 8.63-1
+Conflicts: plymouth < 0.8.0-0.2009.29.09.19.1
+Conflicts: bcache-tools < 0-0.14.20130909git
 %else
 Requires: udev > 166
 Requires: util-linux-ng >= 2.21
 %endif
 
-%if 0%{?fedora} || 0%{?rhel} > 6
-Conflicts: initscripts < 8.63-1
-Conflicts: plymouth < 0.8.0-0.2009.29.09.19.1
-%endif
-
 Conflicts: mdadm < 3.2.6-14
 
 %description
@@ -121,6 +123,7 @@ Summary: dracut modules to build a dracut initramfs with network support
 Requires: %{name} = %{version}-%{release}
 Requires: iputils
 Requires: iproute
+Requires: dhclient
 Obsoletes: dracut-generic < 008
 Provides:  dracut-generic = %{version}-%{release}
 
@@ -204,7 +207,10 @@ git am -p1 %{patches}
 %endif
 
 %build
-%configure --systemdsystemunitdir=%{_unitdir} --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) --libdir=%{_prefix}/lib
+%configure --systemdsystemunitdir=%{_unitdir} --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) --libdir=%{_prefix}/lib \
+%if %{without doc}
+     --disable-documentation
+%endif
 
 make %{?_smp_mflags}
 
@@ -247,15 +253,18 @@ mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/log
 touch $RPM_BUILD_ROOT%{_localstatedir}/log/dracut.log
 mkdir -p $RPM_BUILD_ROOT%{_sharedstatedir}/initramfs
 
-%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
+%if 0%{?fedora} || 0%{?rhel}
 install -m 0644 dracut.conf.d/fedora.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
-install -m 0644 dracut.conf.d/fips.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/40-fips.conf
+rm -f $RPM_BUILD_ROOT%{_mandir}/man?/*suse*
 %endif
-
 %if 0%{?suse_version}
 install -m 0644 dracut.conf.d/suse.conf.example   $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
 %endif
 
+%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
+install -m 0644 dracut.conf.d/fips.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/40-fips.conf
+%endif
+
 %if 0%{?fedora} <= 12 && 0%{?rhel} < 6 && 0%{?suse_version} <= 9999
 rm -f -- $RPM_BUILD_ROOT%{_bindir}/mkinitrd
 rm -f -- $RPM_BUILD_ROOT%{_bindir}/lsinitrd
@@ -270,19 +279,25 @@ echo 'hostonly="no"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-generic-i
 echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-rescue.conf
 %endif
 
+%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
+> $RPM_BUILD_ROOT/etc/system-fips
+%endif
+
 # create compat symlink
-mkdir -p $RPM_BUILD_ROOT/sbin
-ln -s /usr/bin/dracut $RPM_BUILD_ROOT/sbin/dracut
+mkdir -p $RPM_BUILD_ROOT%{_sbindir}
+ln -sr $RPM_BUILD_ROOT%{_bindir}/dracut $RPM_BUILD_ROOT%{_sbindir}/dracut
 
 %clean
 rm -rf -- $RPM_BUILD_ROOT
 
 %files
 %defattr(-,root,root,0755)
+%if %{with doc}
 %doc README HACKING TODO COPYING AUTHORS NEWS dracut.html dracut.png dracut.svg
+%endif
 %{_bindir}/dracut
 # compat symlink
-/sbin/dracut
+%{_sbindir}/dracut
 %{_datadir}/bash-completion/completions/dracut
 %{_datadir}/bash-completion/completions/lsinitrd
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
@@ -297,12 +312,15 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/dracut-logger.sh
 %{dracutlibdir}/dracut-initramfs-restore
 %{dracutlibdir}/dracut-install
+%{dracutlibdir}/skipcpio
 %config(noreplace) %{_sysconfdir}/dracut.conf
 %if 0%{?fedora} || 0%{?suse_version} || 0%{?rhel}
 %{dracutlibdir}/dracut.conf.d/01-dist.conf
 %endif
 %dir %{_sysconfdir}/dracut.conf.d
 %dir %{dracutlibdir}/dracut.conf.d
+
+%if %{with doc}
 %{_mandir}/man8/dracut.8*
 %{_mandir}/man8/*service.8*
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
@@ -311,13 +329,17 @@ rm -rf -- $RPM_BUILD_ROOT
 %endif
 %{_mandir}/man7/dracut.kernel.7*
 %{_mandir}/man7/dracut.cmdline.7*
+%{_mandir}/man7/dracut.modules.7*
 %{_mandir}/man7/dracut.bootup.7*
 %{_mandir}/man5/dracut.conf.5*
+%endif
+
 %if %{defined _unitdir}
 %{dracutlibdir}/modules.d/00systemd-bootchart
 %else
 %{dracutlibdir}/modules.d/00bootchart
 %endif
+%{dracutlibdir}/modules.d/00bash
 %{dracutlibdir}/modules.d/03modsign
 %{dracutlibdir}/modules.d/03rescue
 %{dracutlibdir}/modules.d/04watchdog
@@ -328,7 +350,6 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/50drm
 %{dracutlibdir}/modules.d/50plymouth
 %{dracutlibdir}/modules.d/80cms
-%{dracutlibdir}/modules.d/90bcache
 %{dracutlibdir}/modules.d/90btrfs
 %{dracutlibdir}/modules.d/90crypt
 %{dracutlibdir}/modules.d/90dm
@@ -346,8 +367,10 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/95rootfs-block
 %{dracutlibdir}/modules.d/95dasd
 %{dracutlibdir}/modules.d/95dasd_mod
+%{dracutlibdir}/modules.d/95dasd_rules
 %{dracutlibdir}/modules.d/95fstab-sys
 %{dracutlibdir}/modules.d/95zfcp
+%{dracutlibdir}/modules.d/95zfcp_rules
 %{dracutlibdir}/modules.d/95terminfo
 %{dracutlibdir}/modules.d/95udev-rules
 %{dracutlibdir}/modules.d/95virtfs
@@ -405,17 +428,24 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/95ssh-client
 %{dracutlibdir}/modules.d/45ifcfg
 %{dracutlibdir}/modules.d/95znet
+%{dracutlibdir}/modules.d/95fcoe-uefi
+%{dracutlibdir}/modules.d/99uefi-lib
 
 %if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
 %files fips
 %defattr(-,root,root,0755)
 %{dracutlibdir}/modules.d/01fips
 %{dracutlibdir}/dracut.conf.d/40-fips.conf
+%config(missingok) /etc/system-fips
 %endif
 
 %files fips-aesni
 %defattr(-,root,root,0755)
+
+%if %{with doc}
 %doc COPYING
+%endif
+
 %{dracutlibdir}/modules.d/02fips-aesni
 
 %files caps
@@ -424,7 +454,11 @@ rm -rf -- $RPM_BUILD_ROOT
 
 %files tools
 %defattr(-,root,root,0755)
-%{_mandir}/man8/dracut-catimages.8*
+
+%if %{with doc}
+%doc %{_mandir}/man8/dracut-catimages.8*
+%endif
+
 %{_bindir}/dracut-catimages
 %dir /boot/dracut
 %dir /var/lib/dracut

dracut.usage.asc

@@ -0,0 +1,537 @@
+To create a initramfs image, the most simple command is:
+----
+# dracut
+----
+
+This will generate a general purpose initramfs image, with all possible
+functionality resulting of the combination of the installed dracut modules and
+system tools. The image is /boot/initramfs-_++<kernel version>++_.img and
+contains the kernel modules of the currently active kernel with version
+_++<kernel version>++_.
+
+If the initramfs image already exists, dracut will display an error message, and
+to overwrite the existing image, you have to use the --force option.
+----
+# dracut --force
+----
+
+If you want to specify another filename for the resulting image you would issue
+a command like:
+----
+# dracut foobar.img
+----
+
+To generate an image for a specific kernel version, the command would be:
+----
+# dracut foobar.img 2.6.40-1.rc5.f20
+----
+
+A shortcut to generate the image at the default location for a specific kernel
+version is:
+----
+# dracut --kver 2.6.40-1.rc5.f20
+----
+
+If you want to create lighter, smaller initramfs images, you may want to specify
+the --hostonly or -H option. Using this option, the resulting image will
+contain only those dracut modules, kernel modules and filesystems, which are
+needed to boot this specific machine. This has the drawback, that you can't put
+the disk on another controller or machine, and that you can't switch to another
+root filesystem, without recreating the initramfs image. The usage of the
+--hostonly option is only for experts and you will have to keep the broken
+pieces. At least keep a copy of a general purpose image (and corresponding
+kernel) as a fallback to rescue your system.
+
+=== Inspecting the Contents
+To see the contents of the image created by dracut, you can use the lsinitrd
+tool.
+----
+# lsinitrd | less
+----
+
+To display the contents of a file in the initramfs also use the lsinitrd tool:
+----
+# lsinitrd -f /etc/ld.so.conf
+include ld.so.conf.d/*.conf
+----
+
+=== Adding dracut Modules
+Some dracut modules are turned off by default and have to be activated manually.
+You can do this by adding the dracut modules to the configuration file
+_/etc/dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_. See *dracut.conf*(5).
+You can also add dracut modules on the command line
+by using the -a or --add option:
+----
+# dracut --add bootchart initramfs-bootchart.img
+----
+
+To see a list of available dracut modules, use the --list-modules option:
+----
+# dracut --list-modules
+----
+
+=== Omitting dracut Modules
+Sometimes you don't want a dracut module to be included for reasons of speed,
+size or functionality. To do this, either specify the omit_dracutmodules
+variable in the _dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_ configuration
+file (see *dracut.conf*(5)), or use the -o or --omit option
+on the command line:
+----
+# dracut -o "multipath lvm" no-multipath-lvm.img
+----
+
+=== Adding Kernel Modules
+If you need a special kernel module in the initramfs, which is not
+automatically picked up by dracut, you have the use the --add-drivers option
+on the command line or  the drivers vaiable in  the _/etc/dracut.conf_
+or _/etc/dracut.conf.d/myconf.conf_ configuration file (see *dracut.conf*(5)):
+----
+# dracut --add-drivers mymod initramfs-with-mymod.img
+----
+
+=== Boot parameters
+An initramfs generated without the "hostonly" mode, does not contain any system
+configuration files (except for some special exceptions), so the configuration
+has to be done on the kernel command line. With this flexibility, you can easily
+boot from a changed root partition, without the need to recompile the initramfs
+image. So, you could completly change your root partition (move it inside a md
+raid with encryption and LVM on top), as long as you specify the correct
+filesystem LABEL or UUID on the kernel command line for your root device, dracut
+will find it and boot from it.
+
+The kernel command line usually can be configured in _/boot/grub/grub.conf_ or
+_/boot/grub2/grub.cfg_, if grub is your bootloader and it also can be edited in
+the real boot process in the grub menu.
+
+The kernel command line can also be provided by the dhcp server with the
+root-path option. See <<NetworkBoot>>.
+
+For a full reference of all kernel command line parameters,
+see *dracut.cmdline*(5).
+
+To get a quick start for the suitable kernel command line on your system,
+use the __--print-cmdline__ option:
+----
+# dracut --print-cmdline
+ root=UUID=8b8b6f91-95c7-4da2-831b-171e12179081 rootflags=rw,relatime,discard,data=ordered rootfstype=ext4
+----
+
+==== Specifying the root Device
+This is the only option dracut really needs to boot from your root partition.
+Because your root partition can live in various environments, there are a lot of
+formats for the root= option. The most basic one is root=_++<path to device
+node>++_:
+----
+root=/dev/sda2
+----
+
+Because device node names can change, dependent on the drive ordering, you are
+encouraged to use the filesystem identifier (UUID) or filesystem label (LABEL)
+to specify your root partition:
+----
+root=UUID=19e9dda3-5a38-484d-a9b0-fa6b067d0331
+----
+
+or
+
+----
+root=LABEL=myrootpartitionlabel
+----
+
+To see all UUIDs or LABELs on your system, do:
+----
+# ls -l /dev/disk/by-uuid
+----
+
+or
+
+----
+# ls -l /dev/disk/by-label
+----
+
+If your root partition is on the network see <<NetworkBoot>>.
+
+==== Keyboard Settings
+If you have to input passwords for encrypted disk volumes, you might want to set
+the keyboard layout and specify a display font.
+
+A typical german kernel command would contain:
+----
+rd.vconsole.font=latarcyrheb-sun16 rd.vconsole.keymap=de-latin1-nodeadkeys rd.locale.LANG=de_DE.UTF-8
+----
+
+Setting these options can override the setting stored on your system, if you use
+a modern init system, like systemd.
+
+==== Blacklisting Kernel Modules
+Sometimes it is required to prevent the automatic kernel module loading of a
+specific kernel module. To do this, just add rd.blacklist=_++<kernel module
+name>++_, with _++<kernel module name>++_ not containing the _.ko_
+suffix, to the kernel command line. For example:
+----
+rd.driver.blacklist=mptsas rd.driver.blacklist=nouveau
+----
+
+The option can be specified multiple times on the kernel command line.
+
+==== Speeding up the Boot Process
+If you want to speed up the boot process, you can specify as much information
+for dracut on the kernel command as possible. For example, you can tell dracut,
+that you root partition is not on a LVM volume or not on a raid partition, or
+that it lives inside a specific crypto LUKS encrypted volume. By default, dracut
+searches everywhere. A typical dracut kernel command line for a plain primary or
+logical partition would contain:
+----
+rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0
+----
+
+This turns off every automatic assembly of LVM, MD raids, DM raids and
+crypto LUKS.
+
+Of course, you could also omit the dracut modules in the initramfs creation
+process, but then you would lose the posibility to turn it on on demand.
+
+
+[[Injecting]]
+=== Injecting custom Files
+To add your own files to the initramfs image, you have several possibilities.
+
+The --include option let you specify a source path and a target path.
+For example
+----
+# dracut --include cmdline-preset /etc/cmdline.d/mycmdline.conf initramfs-cmdline-pre.img
+----
+will create an initramfs image, where the file cmdline-preset will be copied
+inside the initramfs to _/etc/cmdline.d/mycmdline.conf_. --include can only
+be specified once.
+
+
+----
+# mkdir -p rd.live.overlay/etc/cmdline.d
+# mkdir -p rd.live.overlay/etc/conf.d
+# echo "ip=auto" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
+# echo export FOO=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
+# echo export BAR=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
+# tree rd.live.overlay/
+rd.live.overlay/
+`-- etc
+    |-- cmdline.d
+    |   `-- mycmdline.conf
+    `-- conf.d
+        `-- testvar.conf
+
+# dracut --include rd.live.overlay / initramfs-rd.live.overlay.img
+----
+
+This will put the contents of the rd.live.overlay directory into the root of the
+initramfs image.
+
+The --install option let you specify several files, which will get installed in
+the initramfs image at the same location, as they are present on initramfs
+creation time.
+
+
+----
+# dracut --install 'strace fsck.ext3 ssh' initramfs-dbg.img
+----
+
+This will create an initramfs with the strace, fsck.ext3 and ssh executables,
+together with the libraries needed to start those. The --install option can be
+specified multiple times.
+
+
+[[NetworkBoot]]
+=== Network Boot
+
+If your root partition is on a network drive, you have to have the network
+dracut modules installed to create a network aware initramfs image.
+
+On a Red Hat Enterprise Linux or Fedora system, this means, you have to install
+the _dracut-network_ rpm package:
+
+
+----
+# yum install dracut-network
+----
+
+The resulting initramfs image can be served by a boot manager residing on your
+local hard drive or it can be served by a PXE/TFTP server.
+
+How to setup your PXE/TFTP server can be found in the
+http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
+Hat Enterprise Linux Storage Administration Guide].
+
+If you specify ip=auto on the kernel command line, then dracut asks a dhcp
+server about the ip adress for the machine. The dhcp server can also serve an
+additional root-path, which will set the root device for dracut. With this
+mechanism, you have static configuration on your client machine and a
+centralized boot configuration on your TFTP/DHCP server. If you can't pass a
+kernel command line, then you can inject _/etc/cmdline.d/mycmdline.conf_, with a
+method described in <<Injecting>>.
+
+==== Reducing the Image Size
+
+To reduce the size of the initramfs, you should create it with by ommitting all
+dracut modules, which you know, you don't need to boot the machine.
+
+You can also specify the exact dracut and kernel modules to produce a very tiny
+initramfs image.
+
+For example for a NFS image, you would do:
+
+
+----
+# dracut -m "nfs network  base" initramfs-nfs-only.img
+----
+
+Then you would boot from this image with your target machine and reduce the size
+once more by creating it on the target machine with the --host-only option:
+
+
+----
+# dracut -m "nfs network base" --host-only initramfs-nfs-host-only.img
+----
+
+This will reduce the size of the initramfs image significantly.
+
+
+== Troubleshooting
+
+If the boot process does not succeed, you have several options to debug the
+situation. Some of the basic operations are covered here. For more information
+you should also visit:
+http://fedoraproject.org/wiki/How_to_debug_Dracut_problems
+
+
+[[identifying-your-problem-area]]
+=== Identifying your problem area
+. Remove ''rhgb'' and ''quiet'' from the kernel command line
+. Add ''rd.shell'' to the kernel command line. This will present a shell should
+dracut be unable to locate your root device
+. Add ''rd.shell rd.debug log_buf_len=1M'' to the kernel command line so that
+dracut shell commands are printed as they are executed
+. The file /run/initramfs/rdsosreport.txt is generated,
+which contains all the logs and the output of all significant tools, which are
+mentioned later.
+
+If you want to save that output, simply mount /boot by hand or insert an USB
+stick and mount that. Then you can store the output for later inspection.
+
+[[information-to-include-in-your-report]]
+=== Information to include in your report
+
+[[all-bug-reports]]
+==== All bug reports
+In all cases, the following should be mentioned and attached to your bug report:
+
+* The exact kernel command-line used. Typically from the bootloader
+configuration file (e.g. _/etc/grub.conf_) or from _/proc/cmdline_.
+* A copy of your disk partition information from _/etc/fstab_, which might be
+obtained booting an old working initramfs or a rescue medium.
+* Turn on dracut debugging (see _the 'debugging dracut' section_), and attach
+the file /run/initramfs/rdsosreport.txt.
+* If you use a dracut configuration file, please include _/etc/dracut.conf_ and
+all files in _/etc/dracut.conf.d/*.conf_
+
+[[network-root-device-related-problems]]
+==== Network root device related problems
+This section details information to include when experiencing problems on a
+system whose root device is located on a network attached volume (e.g. iSCSI,
+NFS or NBD). As well as the information from <<all-bug-reports>>, include the
+following information:
+
+
+* Please include the output of
++
+----
+# /sbin/ifup <interfacename>
+# ip addr show
+----
+
+[[debugging-dracut]]
+=== Debugging dracut
+
+
+[[configure-a-serial-console]]
+==== Configure a serial console
+
+Successfully debugging dracut will require some form of console
+logging during the system boot.  This section documents configuring a
+serial console connection to record boot messages.
+
+. First, enable serial console output for both the kernel and the bootloader.
+. Open the file _/etc/grub.conf_ for editing. Below the line ''timeout=5'', add
+the following:
++
+----
+serial --unit=0 --speed=9600
+terminal --timeout=5 serial console
+----
++
+. Also in _/etc/grub.conf_, add the following boot arguemnts to the ''kernel''
+line:
++
+----
+console=tty0 console=ttyS0,9600
+----
++
+. When finished, the _/etc/grub.conf_ file should look similar to the example
+below.
++
+----
+default=0
+timeout=5
+serial --unit=0 --speed=9600
+terminal --timeout=5 serial console
+title Fedora (2.6.29.5-191.fc11.x86_64)
+  root (hd0,0)
+  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 console=ttyS0,9600
+  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
+----
++
+. More detailed information on how to configure the kernel for console output
+can be found at
+http://www.faqs.org/docs/Linux-HOWTO/Remote-Serial-Console-HOWTO.html#CONFIGURE-KERNEL.
+. Redirecting non-interactive output
++
+--
+NOTE: You can redirect all non-interactive output to _/dev/kmsg_ and the kernel
+will put it out on the console when it reaches the kernel buffer by doing
+
+----
+# exec >/dev/kmsg 2>&1 </dev/console
+----
+--
+
+[[using-the-dracut-shell]]
+==== Using the dracut shell
+
+dracut offers a shell for interactive debugging in the event dracut fails to
+locate your root filesystem. To enable the shell:
+
+. Add the boot parameter ''rd.shell'' to your bootloader configuration file
+(e.g. _/etc/grub.conf_)
+. Remove the boot arguments ''rhgb'' and ''quiet''
++
+A sample _/etc/grub.conf_ bootloader configuration file is listed below.
++
+----
+default=0
+timeout=5
+serial --unit=0 --speed=9600
+terminal --timeout=5 serial console
+title Fedora (2.6.29.5-191.fc11.x86_64)
+  root (hd0,0)
+  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 rd.shell
+  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
+----
++
+. If system boot fails, you will be dropped into a shell as seen in the example
+below.
++
+----
+No root device found
+Dropping to debug shell.
+
+#
+----
++
+. Use this shell prompt to gather the information requested above
+(see <<all-bug-reports>>).
+
+[[accessing-the-root-volume-from-the-dracut-shell]]
+==== Accessing the root volume from the dracut shell
+From the dracut debug shell, you can manually perform the task of locating and
+preparing your root volume for boot. The required steps will depend on how your
+root volume is configured. Common scenarios include:
+
+* A block device (e.g. _/dev/sda7_)
+* A LVM logical volume (e.g. _/dev/VolGroup00/LogVol00_)
+* An encrypted device
+  (e.g. _/dev/mapper/luks-4d5972ea-901c-4584-bd75-1da802417d83_)
+* A network attached device
+  (e.g. _netroot=iscsi:@192.168.0.4::3260::iqn.2009-02.org.example:for.all_)
+
+The exact method for locating and preparing will vary. However, to continue with
+a successful boot, the objective is to locate your root volume and create a
+symlink _/dev/root_ which points to the file system. For example, the following
+example demonstrates accessing and booting a root volume that is an encrypted
+LVM Logical volume.
+
+. Inspect your partitions using parted
++
+----
+# parted /dev/sda -s p
+Model: ATA HTS541060G9AT00 (scsi)
+Disk /dev/sda: 60.0GB
+Sector size (logical/physical): 512B/512B
+Partition Table: msdos
+Number  Start   End     Size    Type      File system  Flags
+1      32.3kB  10.8GB  107MB   primary   ext4         boot
+2      10.8GB  55.6GB  44.7GB  logical                lvm
+----
++
+. You recall that your root volume was a LVM logical volume. Scan and activate
+any logical volumes.
++
+----
+# lvm vgscan
+# lvm vgchange -ay
+----
++
+. You should see any logical volumes now using the command blkid:
++
+----
+# blkid
+/dev/sda1: UUID="3de247f3-5de4-4a44-afc5-1fe179750cf7" TYPE="ext4"
+/dev/sda2: UUID="Ek4dQw-cOtq-5MJu-OGRF-xz5k-O2l8-wdDj0I" TYPE="LVM2_member"
+/dev/mapper/linux-root: UUID="def0269e-424b-4752-acf3-1077bf96ad2c" TYPE="crypto_LUKS"
+/dev/mapper/linux-home: UUID="c69127c1-f153-4ea2-b58e-4cbfa9257c5e" TYPE="ext3"
+/dev/mapper/linux-swap: UUID="47b4d329-975c-4c08-b218-f9c9bf3635f1" TYPE="swap"
+----
++
+. From the output above, you recall that your root volume exists on an encrypted
+block device. Following the guidance disk encryption guidance from the
+Installation Guide, you unlock your encrypted root volume.
++
+----
+# UUID=$(cryptsetup luksUUID /dev/mapper/linux-root)
+# cryptsetup luksOpen /dev/mapper/linux-root luks-$UUID
+Enter passphrase for /dev/mapper/linux-root:
+Key slot 0 unlocked.
+----
++
+. Next, make a symbolic link to the unlocked root volume
++
+----
+# ln -s /dev/mapper/luks-$UUID /dev/root
+----
++
+. With the root volume available, you may continue booting the system by exiting
+the dracut shell
++
+----
+# exit
+----
+
+[[additional-dracut-boot-parameters]]
+==== Additional dracut boot parameters
+For more debugging options, see *dracut.cmdline*(7).
+
+
+[[debugging-dracut-on-shutdown]]
+==== Debugging dracut on shutdown
+
+To debug the shutdown sequence on systemd systems, you can _rd.break_
+on _pre-shutdown_ or _shutdown_.
+
+To do this from an already booted system:
+----
+# mkdir -p /run/initramfs/etc/cmdline.d
+# echo "rd.break=pre-shutdown" > /run/initramfs/etc/cmdline.d/debug.conf
+# touch /run/initramfs/.need_shutdown
+----
+
+This will give you a dracut shell after the system pivot'ed back in the
+initramfs.
+

install/dracut-install.c

@@ -44,6 +44,7 @@
 #include "log.h"
 #include "hashmap.h"
 #include "util.h"
+#include "strv.h"
 
 static bool arg_hmac = false;
 static bool arg_createdir = false;
@@ -63,12 +64,12 @@ static size_t dir_len(char const *file)
 {
         size_t length;
 
-        if(!file)
+        if (!file)
                 return 0;
 
         /* Strip the basename and any redundant slashes before it.  */
-        for (length = strlen(file)-1; 0 < length; length--)
-                if (file[length] == '/' && file[length-1] != '/')
+        for (length = strlen(file) - 1; 0 < length; length--)
+                if (file[length] == '/' && file[length - 1] != '/')
                         break;
         return length;
 }
@@ -101,9 +102,9 @@ static char *convert_abs_rel(const char *from, const char *target)
         /* dir_len() skips double /'s e.g. //lib64, so we can't skip just one
          * character - need to skip all leading /'s */
         rl = strlen(target);
-        for (i = dirlen+1; i < rl; ++i)
-            if (target_dir_p[i] != '/')
-                break;
+        for (i = dirlen + 1; i < rl; ++i)
+                if (target_dir_p[i] != '/')
+                        break;
         ret = asprintf(&realtarget, "%s/%s", realpath_p, &target_dir_p[i]);
         if (ret < 0) {
                 log_error("Out of memory!");
@@ -220,7 +221,7 @@ static int cp(const char *src, const char *dst)
                 if (ret == 0) {
                         struct timeval tv[2];
                         if (fchown(dest_desc, sb.st_uid, sb.st_gid) != 0)
-                                fchown(dest_desc, (__uid_t)-1, sb.st_gid);
+                                fchown(dest_desc, (__uid_t) - 1, sb.st_gid);
                         tv[0].tv_sec = sb.st_atime;
                         tv[0].tv_usec = 0;
                         tv[1].tv_sec = sb.st_mtime;
@@ -239,14 +240,16 @@ static int cp(const char *src, const char *dst)
  normal_copy:
         pid = fork();
         if (pid == 0) {
-                execlp("cp", "cp", "--reflink=auto", "--sparse=auto", "--preserve=mode,timestamps", "-fL", src, dst, NULL);
+                execlp("cp", "cp", "--reflink=auto", "--sparse=auto", "--preserve=mode,timestamps", "-fL", src, dst,
+                       NULL);
                 _exit(EXIT_FAILURE);
         }
 
         while (waitpid(pid, &ret, 0) < 0) {
                 if (errno != EINTR) {
                         ret = -1;
-                        log_error("Failed: cp --reflink=auto --sparse=auto --preserve=mode,timestamps -fL %s %s", src, dst);
+                        log_error("Failed: cp --reflink=auto --sparse=auto --preserve=mode,timestamps -fL %s %s", src,
+                                  dst);
                         break;
                 }
         }
@@ -286,7 +289,7 @@ static int library_install(const char *src, const char *lib)
            libc.so.6 (libc6,64bit, hwcap: 0x0000001000000000, OS ABI: Linux 2.6.32) => /lib64/power6/libc.so.6
            libc.so.6 (libc6,64bit, hwcap: 0x0000000000000200, OS ABI: Linux 2.6.32) => /lib64/power6x/libc.so.6
            libc.so.6 (libc6,64bit, OS ABI: Linux 2.6.32) => /lib64/libc.so.6
-        */
+         */
 
         free(p);
         p = strdup(lib);
@@ -372,7 +375,7 @@ static int resolve_deps(const char *src)
 
                 if (strstr(buf, "you do not have execution permission")) {
                         log_error("%s", buf);
-                        ret+=1;
+                        ret += 1;
                         break;
                 }
 
@@ -391,7 +394,11 @@ static int resolve_deps(const char *src)
                 if (strstr(buf, destrootdir))
                         break;
 
-                p = strchr(buf, '/');
+                p = strstr(buf, "=>");
+                if (!p)
+                        p = buf;
+
+                p = strchr(p, '/');
                 if (p) {
                         for (q = p; *q && *q != ' ' && *q != '\n'; q++) ;
                         *q = '\0';
@@ -421,7 +428,7 @@ static int hmac_install(const char *src, const char *dst, const char *hmacpath)
         if (endswith(src, ".hmac"))
                 return 0;
 
-	if (!hmacpath) {
+        if (!hmacpath) {
                 hmac_install(src, dst, "/lib/fipscheck");
                 hmac_install(src, dst, "/lib64/fipscheck");
                 hmac_install(src, dst, "/lib/hmaccalc");
@@ -635,8 +642,8 @@ static void item_free(char *i)
 }
 
 static void usage(int status)
-{        
-             /*                                                                     */
+{
+        /*                                                                     */
         printf("Usage: %s -D DESTROOTDIR [OPTION]... -a SOURCE...\n"
                "or: %s -D DESTROOTDIR [OPTION]... SOURCE DEST\n"
                "\n"
@@ -676,8 +683,8 @@ static void usage(int status)
                "        |-- libdl.so -> libdl-2.15.90.so\n"
                "        |-- libdl.so.2 -> libdl-2.15.90.so\n"
                "        |-- libtinfo.so.5 -> libtinfo.so.5.9\n"
-               "        `-- libtinfo.so.5.9\n"
-               , program_invocation_short_name, program_invocation_short_name, program_invocation_short_name);
+               "        `-- libtinfo.so.5.9\n", program_invocation_short_name, program_invocation_short_name,
+               program_invocation_short_name);
         exit(status);
 }
 
@@ -784,13 +791,13 @@ static int resolve_lazy(int argc, char **argv)
         return ret;
 }
 
-static char *find_binary(const char *src)
+static char **find_binary(const char *src)
 {
-        _cleanup_free_ char *path = NULL;
-        char *p, *q;
-        bool end = false;
+        char *path = NULL;
+        _cleanup_strv_free_ char **p = NULL;
+        char **ret = NULL;
+        char **q;
         char *newsrc = NULL;
-        int ret;
 
         path = getenv("PATH");
 
@@ -798,34 +805,21 @@ static char *find_binary(const char *src)
                 log_error("PATH is not set");
                 exit(EXIT_FAILURE);
         }
-        path = strdup(path);
-        p = path;
-
-        if (path == NULL) {
-                log_error("Out of memory!");
-                exit(EXIT_FAILURE);
-        }
 
         log_debug("PATH=%s", path);
 
-        do {
+        p = strv_split(path, ":");
+
+        STRV_FOREACH(q, p) {
                 struct stat sb;
+                int r;
 
-                for (q = p; *q && *q != ':'; q++) ;
-
-                if (*q == '\0')
-                        end = true;
-                else
-                        *q = '\0';
-
-                ret = asprintf(&newsrc, "%s/%s", p, src);
-                if (ret < 0) {
+                r = asprintf(&newsrc, "%s/%s", *q, src);
+                if (r < 0) {
                         log_error("Out of memory!");
                         exit(EXIT_FAILURE);
                 }
 
-                p = q + 1;
-
                 if (stat(newsrc, &sb) != 0) {
                         log_debug("stat(%s) != 0", newsrc);
                         free(newsrc);
@@ -833,30 +827,37 @@ static char *find_binary(const char *src)
                         continue;
                 }
 
-                end = true;
+                strv_push(&ret, newsrc);
 
-        } while (!end);
+        };
 
-        if (newsrc)
-                log_debug("find_binary(%s) == %s", src, newsrc);
+        if (ret) {
+                STRV_FOREACH(q, ret) {
+                        log_debug("find_binary(%s) == %s", src, *q);
+                }
+        }
 
-        return newsrc;
+        return ret;
 }
 
 static int install_one(const char *src, const char *dst)
 {
         int r = EXIT_SUCCESS;
-        int ret;
+        int ret = 0;
 
         if (strchr(src, '/') == NULL) {
-                char *newsrc = find_binary(src);
-                if (newsrc) {
-                        log_debug("dracut_install '%s' '%s'", newsrc, dst);
-                        ret = dracut_install(newsrc, dst, arg_createdir, arg_resolvedeps, true);
-                        if (ret == 0) {
-                                log_debug("dracut_install '%s' '%s' OK", newsrc, dst);
+                char **q = NULL;
+                char **p = find_binary(src);
+                if (p) {
+                        STRV_FOREACH(q, p) {
+                                char *newsrc = *q;
+                                log_debug("dracut_install '%s' '%s'", newsrc, dst);
+                                ret = dracut_install(newsrc, dst, arg_createdir, arg_resolvedeps, true);
+                                if (ret == 0) {
+                                        log_debug("dracut_install '%s' '%s' OK", newsrc, dst);
+                                }
                         }
-                        free(newsrc);
+                        strv_free(p);
                 } else {
                         ret = -1;
                 }
@@ -877,17 +878,22 @@ static int install_all(int argc, char **argv)
         int r = EXIT_SUCCESS;
         int i;
         for (i = 0; i < argc; i++) {
-                int ret;
+                int ret = 0;
                 log_debug("Handle '%s'", argv[i]);
 
                 if (strchr(argv[i], '/') == NULL) {
-                        _cleanup_free_ char *newsrc = find_binary(argv[i]);
-                        if (newsrc) {
-                                log_debug("dracut_install '%s'", newsrc);
-                                ret = dracut_install(newsrc, newsrc, arg_createdir, arg_resolvedeps, true);
-                                if (ret == 0) {
-                                        log_debug("dracut_install '%s' OK", newsrc);
+                        char **q = NULL;
+                        char **p = find_binary(argv[i]);
+                        if (p) {
+                                STRV_FOREACH(q, p) {
+                                        char *newsrc = *q;
+                                        log_debug("dracut_install '%s'", newsrc);
+                                        ret = dracut_install(newsrc, newsrc, arg_createdir, arg_resolvedeps, true);
+                                        if (ret == 0) {
+                                                log_debug("dracut_install '%s' OK", newsrc);
+                                        }
                                 }
+                                strv_free(p);
                         } else {
                                 ret = -1;
                         }

install/strv.c

@@ -0,0 +1,587 @@
+/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
+
+/***
+  This file is part of systemd.
+
+  Copyright 2010 Lennart Poettering
+
+  systemd is free software; you can redistribute it and/or modify it
+  under the terms of the GNU Lesser General Public License as published by
+  the Free Software Foundation; either version 2.1 of the License, or
+  (at your option) any later version.
+
+  systemd is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public License
+  along with systemd; If not, see <http://www.gnu.org/licenses/>.
+***/
+
+#include <assert.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <errno.h>
+
+#include "util.h"
+#include "strv.h"
+
+char *strv_find(char **l, const char *name) {
+        char **i;
+
+        assert(name);
+
+        STRV_FOREACH(i, l)
+                if (streq(*i, name))
+                        return *i;
+
+        return NULL;
+}
+
+char *strv_find_prefix(char **l, const char *name) {
+        char **i;
+
+        assert(name);
+
+        STRV_FOREACH(i, l)
+                if (startswith(*i, name))
+                        return *i;
+
+        return NULL;
+}
+
+void strv_free(char **l) {
+        char **k;
+
+        if (!l)
+                return;
+
+        for (k = l; *k; k++)
+                free(*k);
+
+        free(l);
+}
+
+char **strv_copy(char * const *l) {
+        char **r, **k;
+
+        k = r = new(char*, strv_length(l) + 1);
+        if (!r)
+                return NULL;
+
+        if (l)
+                for (; *l; k++, l++) {
+                        *k = strdup(*l);
+                        if (!*k) {
+                                strv_free(r);
+                                return NULL;
+                        }
+                }
+
+        *k = NULL;
+        return r;
+}
+
+unsigned strv_length(char * const *l) {
+        unsigned n = 0;
+
+        if (!l)
+                return 0;
+
+        for (; *l; l++)
+                n++;
+
+        return n;
+}
+
+char **strv_new_ap(const char *x, va_list ap) {
+        const char *s;
+        char **a;
+        unsigned n = 0, i = 0;
+        va_list aq;
+
+        /* As a special trick we ignore all listed strings that equal
+         * (const char*) -1. This is supposed to be used with the
+         * STRV_IFNOTNULL() macro to include possibly NULL strings in
+         * the string list. */
+
+        if (x) {
+                n = x == (const char*) -1 ? 0 : 1;
+
+                va_copy(aq, ap);
+                while ((s = va_arg(aq, const char*))) {
+                        if (s == (const char*) -1)
+                                continue;
+
+                        n++;
+                }
+
+                va_end(aq);
+        }
+
+        a = new(char*, n+1);
+        if (!a)
+                return NULL;
+
+        if (x) {
+                if (x != (const char*) -1) {
+                        a[i] = strdup(x);
+                        if (!a[i])
+                                goto fail;
+                        i++;
+                }
+
+                while ((s = va_arg(ap, const char*))) {
+
+                        if (s == (const char*) -1)
+                                continue;
+
+                        a[i] = strdup(s);
+                        if (!a[i])
+                                goto fail;
+
+                        i++;
+                }
+        }
+
+        a[i] = NULL;
+
+        return a;
+
+fail:
+        strv_free(a);
+        return NULL;
+}
+
+char **strv_new(const char *x, ...) {
+        char **r;
+        va_list ap;
+
+        va_start(ap, x);
+        r = strv_new_ap(x, ap);
+        va_end(ap);
+
+        return r;
+}
+
+char **strv_merge(char **a, char **b) {
+        char **r, **k;
+
+        if (!a)
+                return strv_copy(b);
+
+        if (!b)
+                return strv_copy(a);
+
+        r = new(char*, strv_length(a) + strv_length(b) + 1);
+        if (!r)
+                return NULL;
+
+        for (k = r; *a; k++, a++) {
+                *k = strdup(*a);
+                if (!*k)
+                        goto fail;
+        }
+
+        for (; *b; k++, b++) {
+                *k = strdup(*b);
+                if (!*k)
+                        goto fail;
+        }
+
+        *k = NULL;
+        return r;
+
+fail:
+        strv_free(r);
+        return NULL;
+}
+
+char **strv_merge_concat(char **a, char **b, const char *suffix) {
+        char **r, **k;
+
+        /* Like strv_merge(), but appends suffix to all strings in b, before adding */
+
+        if (!b)
+                return strv_copy(a);
+
+        r = new(char*, strv_length(a) + strv_length(b) + 1);
+        if (!r)
+                return NULL;
+
+        k = r;
+        if (a)
+                for (; *a; k++, a++) {
+                        *k = strdup(*a);
+                        if (!*k)
+                                goto fail;
+                }
+
+        for (; *b; k++, b++) {
+                *k = strappend(*b, suffix);
+                if (!*k)
+                        goto fail;
+        }
+
+        *k = NULL;
+        return r;
+
+fail:
+        strv_free(r);
+        return NULL;
+
+}
+
+char **strv_split(const char *s, const char *separator) {
+        char *state;
+        char *w;
+        size_t l;
+        unsigned n, i;
+        char **r;
+
+        assert(s);
+
+        n = 0;
+        FOREACH_WORD_SEPARATOR(w, l, s, separator, state)
+                n++;
+
+        r = new(char*, n+1);
+        if (!r)
+                return NULL;
+
+        i = 0;
+        FOREACH_WORD_SEPARATOR(w, l, s, separator, state) {
+                r[i] = strndup(w, l);
+                if (!r[i]) {
+                        strv_free(r);
+                        return NULL;
+                }
+
+                i++;
+        }
+
+        r[i] = NULL;
+        return r;
+}
+
+char **strv_split_quoted(const char *s) {
+        char *state;
+        char *w;
+        size_t l;
+        unsigned n, i;
+        char **r;
+
+        assert(s);
+
+        n = 0;
+        FOREACH_WORD_QUOTED(w, l, s, state)
+                n++;
+
+        r = new(char*, n+1);
+        if (!r)
+                return NULL;
+
+        i = 0;
+        FOREACH_WORD_QUOTED(w, l, s, state) {
+                r[i] = cunescape_length(w, l);
+                if (!r[i]) {
+                        strv_free(r);
+                        return NULL;
+                }
+                i++;
+        }
+
+        r[i] = NULL;
+        return r;
+}
+
+char **strv_split_newlines(const char *s) {
+        char **l;
+        unsigned n;
+
+        assert(s);
+
+        /* Special version of strv_split() that splits on newlines and
+         * suppresses an empty string at the end */
+
+        l = strv_split(s, NEWLINE);
+        if (!l)
+                return NULL;
+
+        n = strv_length(l);
+        if (n <= 0)
+                return l;
+
+        if (isempty(l[n-1])) {
+                free(l[n-1]);
+                l[n-1] = NULL;
+        }
+
+        return l;
+}
+
+char *strv_join(char **l, const char *separator) {
+        char *r, *e;
+        char **s;
+        size_t n, k;
+
+        if (!separator)
+                separator = " ";
+
+        k = strlen(separator);
+
+        n = 0;
+        STRV_FOREACH(s, l) {
+                if (n != 0)
+                        n += k;
+                n += strlen(*s);
+        }
+
+        r = new(char, n+1);
+        if (!r)
+                return NULL;
+
+        e = r;
+        STRV_FOREACH(s, l) {
+                if (e != r)
+                        e = stpcpy(e, separator);
+
+                e = stpcpy(e, *s);
+        }
+
+        *e = 0;
+
+        return r;
+}
+
+char **strv_append(char **l, const char *s) {
+        char **r, **k;
+
+        if (!l)
+                return strv_new(s, NULL);
+
+        if (!s)
+                return strv_copy(l);
+
+        r = new(char*, strv_length(l)+2);
+        if (!r)
+                return NULL;
+
+        for (k = r; *l; k++, l++) {
+                *k = strdup(*l);
+                if (!*k)
+                        goto fail;
+        }
+
+        k[0] = strdup(s);
+        if (!k[0])
+                goto fail;
+
+        k[1] = NULL;
+        return r;
+
+fail:
+        strv_free(r);
+        return NULL;
+}
+
+int strv_push(char ***l, char *value) {
+        char **c;
+        unsigned n;
+
+        if (!value)
+                return 0;
+
+        n = strv_length(*l);
+        c = realloc(*l, sizeof(char*) * (n + 2));
+        if (!c)
+                return -ENOMEM;
+
+        c[n] = value;
+        c[n+1] = NULL;
+
+        *l = c;
+        return 0;
+}
+
+int strv_extend(char ***l, const char *value) {
+        char *v;
+        int r;
+
+        if (!value)
+                return 0;
+
+        v = strdup(value);
+        if (!v)
+                return -ENOMEM;
+
+        r = strv_push(l, v);
+        if (r < 0)
+                free(v);
+
+        return r;
+}
+
+char **strv_uniq(char **l) {
+        char **i;
+
+        /* Drops duplicate entries. The first identical string will be
+         * kept, the others dropped */
+
+        STRV_FOREACH(i, l)
+                strv_remove(i+1, *i);
+
+        return l;
+}
+
+char **strv_remove(char **l, const char *s) {
+        char **f, **t;
+
+        if (!l)
+                return NULL;
+
+        assert(s);
+
+        /* Drops every occurrence of s in the string list, edits
+         * in-place. */
+
+        for (f = t = l; *f; f++) {
+
+                if (streq(*f, s)) {
+                        free(*f);
+                        continue;
+                }
+
+                *(t++) = *f;
+        }
+
+        *t = NULL;
+        return l;
+}
+
+char **strv_remove_prefix(char **l, const char *s) {
+        char **f, **t;
+
+        if (!l)
+                return NULL;
+
+        assert(s);
+
+        /* Drops every occurrence of a string prefixed with s in the
+         * string list, edits in-place. */
+
+        for (f = t = l; *f; f++) {
+
+                if (startswith(*f, s)) {
+                        free(*f);
+                        continue;
+                }
+
+                *(t++) = *f;
+        }
+
+        *t = NULL;
+        return l;
+}
+
+char **strv_parse_nulstr(const char *s, size_t l) {
+        const char *p;
+        unsigned c = 0, i = 0;
+        char **v;
+
+        assert(s || l <= 0);
+
+        if (l <= 0)
+                return new0(char*, 1);
+
+        for (p = s; p < s + l; p++)
+                if (*p == 0)
+                        c++;
+
+        if (s[l-1] != 0)
+                c++;
+
+        v = new0(char*, c+1);
+        if (!v)
+                return NULL;
+
+        p = s;
+        while (p < s + l) {
+                const char *e;
+
+                e = memchr(p, 0, s + l - p);
+
+                v[i] = strndup(p, e ? e - p : s + l - p);
+                if (!v[i]) {
+                        strv_free(v);
+                        return NULL;
+                }
+
+                i++;
+
+                if (!e)
+                        break;
+
+                p = e + 1;
+        }
+
+        assert(i == c);
+
+        return v;
+}
+
+char **strv_split_nulstr(const char *s) {
+        const char *i;
+        char **r = NULL;
+
+        NULSTR_FOREACH(i, s)
+                if (strv_extend(&r, i) < 0) {
+                        strv_free(r);
+                        return NULL;
+                }
+
+        if (!r)
+                return strv_new(NULL, NULL);
+
+        return r;
+}
+
+bool strv_overlap(char **a, char **b) {
+        char **i, **j;
+
+        STRV_FOREACH(i, a) {
+                STRV_FOREACH(j, b) {
+                        if (streq(*i, *j))
+                                return true;
+                }
+        }
+
+        return false;
+}
+
+static int str_compare(const void *_a, const void *_b) {
+        const char **a = (const char**) _a, **b = (const char**) _b;
+
+        return strcmp(*a, *b);
+}
+
+char **strv_sort(char **l) {
+
+        if (strv_isempty(l))
+                return l;
+
+        qsort(l, strv_length(l), sizeof(char*), str_compare);
+        return l;
+}
+
+void strv_print(char **l) {
+        char **s;
+
+        if (!l)
+                return;
+
+        STRV_FOREACH(s, l)
+                puts(*s);
+}

install/strv.h

@@ -0,0 +1,118 @@
+/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
+
+#pragma once
+
+/***
+  This file is part of systemd.
+
+  Copyright 2010 Lennart Poettering
+
+  systemd is free software; you can redistribute it and/or modify it
+  under the terms of the GNU Lesser General Public License as published by
+  the Free Software Foundation; either version 2.1 of the License, or
+  (at your option) any later version.
+
+  systemd is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public License
+  along with systemd; If not, see <http://www.gnu.org/licenses/>.
+***/
+
+#include <stdarg.h>
+#include <stdbool.h>
+
+#include "util.h"
+
+char *strv_find(char **l, const char *name) _pure_;
+char *strv_find_prefix(char **l, const char *name) _pure_;
+
+void strv_free(char **l);
+DEFINE_TRIVIAL_CLEANUP_FUNC(char**, strv_free);
+#define _cleanup_strv_free_ _cleanup_(strv_freep)
+
+char **strv_copy(char * const *l);
+unsigned strv_length(char * const *l) _pure_;
+
+char **strv_merge(char **a, char **b);
+char **strv_merge_concat(char **a, char **b, const char *suffix);
+char **strv_append(char **l, const char *s);
+int strv_extend(char ***l, const char *value);
+int strv_push(char ***l, char *value);
+
+char **strv_remove(char **l, const char *s);
+char **strv_remove_prefix(char **l, const char *s);
+char **strv_uniq(char **l);
+
+#define strv_contains(l, s) (!!strv_find((l), (s)))
+
+char **strv_new(const char *x, ...) _sentinel_;
+char **strv_new_ap(const char *x, va_list ap);
+
+static inline const char* STRV_IFNOTNULL(const char *x) {
+        return x ? x : (const char *) -1;
+}
+
+static inline bool strv_isempty(char * const *l) {
+        return !l || !*l;
+}
+
+char **strv_split(const char *s, const char *separator);
+char **strv_split_quoted(const char *s);
+char **strv_split_newlines(const char *s);
+
+char *strv_join(char **l, const char *separator);
+
+char **strv_parse_nulstr(const char *s, size_t l);
+char **strv_split_nulstr(const char *s);
+
+bool strv_overlap(char **a, char **b) _pure_;
+
+#define STRV_FOREACH(s, l)                      \
+        for ((s) = (l); (s) && *(s); (s)++)
+
+#define STRV_FOREACH_BACKWARDS(s, l)            \
+        STRV_FOREACH(s, l)                      \
+                ;                               \
+        for ((s)--; (l) && ((s) >= (l)); (s)--)
+
+#define STRV_FOREACH_PAIR(x, y, l)               \
+        for ((x) = (l), (y) = (x+1); (x) && *(x) && *(y); (x) += 2, (y) = (x + 1))
+
+char **strv_sort(char **l);
+void strv_print(char **l);
+
+#define STRV_MAKE(...) ((char**) ((const char*[]) { __VA_ARGS__, NULL }))
+
+#define STRV_MAKE_EMPTY ((char*[1]) { NULL })
+
+#define strv_from_stdarg_alloca(first)                          \
+        ({                                                      \
+                char **_l;                                      \
+                                                                \
+                if (!first)                                     \
+                        _l = (char**) &first;                   \
+                else {                                          \
+                        unsigned _n;                            \
+                        va_list _ap;                            \
+                                                                \
+                        _n = 1;                                 \
+                        va_start(_ap, first);                   \
+                        while (va_arg(_ap, char*))              \
+                                _n++;                           \
+                        va_end(_ap);                            \
+                                                                \
+                        _l = newa(char*, _n+1);                 \
+                        _l[_n = 0] = (char*) first;             \
+                        va_start(_ap, first);                   \
+                        for (;;) {                              \
+                                _l[++_n] = va_arg(_ap, char*);  \
+                                if (!_l[_n])                    \
+                                        break;                  \
+                        }                                       \
+                        va_end(_ap);                            \
+                }                                               \
+                _l;                                             \
+        })

install/util.c

@@ -277,3 +277,238 @@ char *strjoin(const char *x, ...) {
 
         return r;
 }
+
+char *cunescape_length_with_prefix(const char *s, size_t length, const char *prefix) {
+        char *r, *t;
+        const char *f;
+        size_t pl;
+
+        assert(s);
+
+        /* Undoes C style string escaping, and optionally prefixes it. */
+
+        pl = prefix ? strlen(prefix) : 0;
+
+        r = new(char, pl+length+1);
+        if (!r)
+                return r;
+
+        if (prefix)
+                memcpy(r, prefix, pl);
+
+        for (f = s, t = r + pl; f < s + length; f++) {
+
+                if (*f != '\\') {
+                        *(t++) = *f;
+                        continue;
+                }
+
+                f++;
+
+                switch (*f) {
+
+                case 'a':
+                        *(t++) = '\a';
+                        break;
+                case 'b':
+                        *(t++) = '\b';
+                        break;
+                case 'f':
+                        *(t++) = '\f';
+                        break;
+                case 'n':
+                        *(t++) = '\n';
+                        break;
+                case 'r':
+                        *(t++) = '\r';
+                        break;
+                case 't':
+                        *(t++) = '\t';
+                        break;
+                case 'v':
+                        *(t++) = '\v';
+                        break;
+                case '\\':
+                        *(t++) = '\\';
+                        break;
+                case '"':
+                        *(t++) = '"';
+                        break;
+                case '\'':
+                        *(t++) = '\'';
+                        break;
+
+                case 's':
+                        /* This is an extension of the XDG syntax files */
+                        *(t++) = ' ';
+                        break;
+
+                case 'x': {
+                        /* hexadecimal encoding */
+                        int a, b;
+
+                        a = unhexchar(f[1]);
+                        b = unhexchar(f[2]);
+
+                        if (a < 0 || b < 0) {
+                                /* Invalid escape code, let's take it literal then */
+                                *(t++) = '\\';
+                                *(t++) = 'x';
+                        } else {
+                                *(t++) = (char) ((a << 4) | b);
+                                f += 2;
+                        }
+
+                        break;
+                }
+
+                case '0':
+                case '1':
+                case '2':
+                case '3':
+                case '4':
+                case '5':
+                case '6':
+                case '7': {
+                        /* octal encoding */
+                        int a, b, c;
+
+                        a = unoctchar(f[0]);
+                        b = unoctchar(f[1]);
+                        c = unoctchar(f[2]);
+
+                        if (a < 0 || b < 0 || c < 0) {
+                                /* Invalid escape code, let's take it literal then */
+                                *(t++) = '\\';
+                                *(t++) = f[0];
+                        } else {
+                                *(t++) = (char) ((a << 6) | (b << 3) | c);
+                                f += 2;
+                        }
+
+                        break;
+                }
+
+                case 0:
+                        /* premature end of string.*/
+                        *(t++) = '\\';
+                        goto finish;
+
+                default:
+                        /* Invalid escape code, let's take it literal then */
+                        *(t++) = '\\';
+                        *(t++) = *f;
+                        break;
+                }
+        }
+
+finish:
+        *t = 0;
+        return r;
+}
+
+char *cunescape_length(const char *s, size_t length) {
+        return cunescape_length_with_prefix(s, length, NULL);
+}
+
+
+/* Split a string into words, but consider strings enclosed in '' and
+ * "" as words even if they include spaces. */
+char *split_quoted(const char *c, size_t *l, char **state) {
+        const char *current, *e;
+        bool escaped = false;
+
+        assert(c);
+        assert(l);
+        assert(state);
+
+        current = *state ? *state : c;
+
+        current += strspn(current, WHITESPACE);
+
+        if (*current == 0)
+                return NULL;
+
+        else if (*current == '\'') {
+                current ++;
+
+                for (e = current; *e; e++) {
+                        if (escaped)
+                                escaped = false;
+                        else if (*e == '\\')
+                                escaped = true;
+                        else if (*e == '\'')
+                                break;
+                }
+
+                *l = e-current;
+                *state = (char*) (*e == 0 ? e : e+1);
+
+        } else if (*current == '\"') {
+                current ++;
+
+                for (e = current; *e; e++) {
+                        if (escaped)
+                                escaped = false;
+                        else if (*e == '\\')
+                                escaped = true;
+                        else if (*e == '\"')
+                                break;
+                }
+
+                *l = e-current;
+                *state = (char*) (*e == 0 ? e : e+1);
+
+        } else {
+                for (e = current; *e; e++) {
+                        if (escaped)
+                                escaped = false;
+                        else if (*e == '\\')
+                                escaped = true;
+                        else if (strchr(WHITESPACE, *e))
+                                break;
+                }
+                *l = e-current;
+                *state = (char*) e;
+        }
+
+        return (char*) current;
+}
+
+/* Split a string into words. */
+char *split(const char *c, size_t *l, const char *separator, char **state) {
+        char *current;
+
+        current = *state ? *state : (char*) c;
+
+        if (!*current || *c == 0)
+                return NULL;
+
+        current += strspn(current, separator);
+        *l = strcspn(current, separator);
+        *state = current+*l;
+
+        return (char*) current;
+}
+
+int unhexchar(char c) {
+
+        if (c >= '0' && c <= '9')
+                return c - '0';
+
+        if (c >= 'a' && c <= 'f')
+                return c - 'a' + 10;
+
+        if (c >= 'A' && c <= 'F')
+                return c - 'A' + 10;
+
+        return -1;
+}
+
+int unoctchar(char c) {
+
+        if (c >= '0' && c <= '7')
+                return c - '0';
+
+        return -1;
+}

install/util.h

@@ -134,8 +134,16 @@ static inline bool isempty(const char *p) {
         return !p || !p[0];
 }
 
+
+static inline const char *startswith(const char *s, const char *prefix) {
+        if (strncmp(s, prefix, strlen(prefix)) == 0)
+                return s + strlen(prefix);
+        return NULL;
+}
+
 bool endswith(const char *s, const char *postfix);
-bool startswith(const char *s, const char *prefix);
+
+
 bool startswith_no_case(const char *s, const char *prefix);
 
 bool first_word(const char *s, const char *word);
@@ -562,4 +570,16 @@ void warn_melody(void);
 
 char *strjoin(const char *x, ...) _sentinel_;
 
+#define DEFINE_TRIVIAL_CLEANUP_FUNC(type, func)                 \
+        static inline void func##p(type *p) {                   \
+                if (*p)                                         \
+                        func(*p);                               \
+        }                                                       \
+        struct __useless_struct_to_allow_trailing_semicolon__
+
+char *split_quoted(const char *c, size_t *l, char **state);
+char *cunescape_length(const char *s, size_t length);
+int unhexchar(char c) _const_;
+int unoctchar(char c) _const_;
+
 #endif

lsinitrd-bash-completion.sh

@@ -1,4 +1,4 @@
-#!/bin/bash
+#
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 #

lsinitrd.sh

@@ -33,6 +33,9 @@ usage()
     } >&2
 }
 
+
+[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
+
 sorted=0
 declare -A filenames
 
@@ -103,50 +106,108 @@ if ! [[ -f "$image" ]]; then
     exit 1
 fi
 
-read -N 6 bin < "$image"
-case $bin in
-    $'\x1f\x8b'*)
-        CAT="zcat";;
-    BZh*)
-        CAT="bzcat";;
-    070701)
-        CAT="cat";;
-    *)
-        CAT="xzcat";
-        if echo "test"|xz|xzcat --single-stream >/dev/null 2>&1; then
-            CAT="xzcat --single-stream"
-        fi
-        ;;
-esac
-
-ret=0
-
-if (( ${#filenames[@]} > 0 )); then
+extract_files()
+{
     (( ${#filenames[@]} == 1 )) && nofileinfo=1
     for f in ${!filenames[@]}; do
         [[ $nofileinfo ]] || echo "initramfs:/$f"
         [[ $nofileinfo ]] || echo "========================================================================"
-        $CAT -- $image | cpio --extract --verbose --quiet --to-stdout $f 2>/dev/null
+        $CAT $image | cpio --extract --verbose --quiet --to-stdout $f 2>/dev/null
         ((ret+=$?))
         [[ $nofileinfo ]] || echo "========================================================================"
         [[ $nofileinfo ]] || echo
     done
-else
-    echo "Image: $image: $(du -h $image | while read a b; do echo $a;done)"
-    echo "========================================================================"
-    version=$($CAT -- "$image" | cpio --extract --verbose --quiet --to-stdout -- '*lib/dracut/dracut-*' 2>/dev/null)
-    ((ret+=$?))
-    echo "$version with dracut modules:"
-    $CAT -- "$image" | cpio --extract --verbose --quiet --to-stdout -- 'usr/lib/dracut/modules.txt' 2>/dev/null
-    ((ret+=$?))
+}
+
+list_files()
+{
     echo "========================================================================"
     if [ "$sorted" -eq 1 ]; then
-        $CAT -- "$image" | cpio --extract --verbose --quiet --list | sort -n -k5
+        $CAT "$image" | cpio --extract --verbose --quiet --list | sort -n -k5
     else
-        $CAT -- "$image" | cpio --extract --verbose --quiet --list | sort -k9
+        $CAT "$image" | cpio --extract --verbose --quiet --list | sort -k9
     fi
     ((ret+=$?))
     echo "========================================================================"
+}
+
+
+if (( ${#filenames[@]} <= 0 )); then
+    echo "Image: $image: $(du -h $image | while read a b; do echo $a;done)"
+    echo "========================================================================"
+fi
+
+read -N 6 bin < "$image"
+case $bin in
+    $'\x71\xc7'*|070701)
+        CAT="cat --"
+        is_early=$(cpio --extract --verbose --quiet --to-stdout -- 'early_cpio' < "$image" 2>/dev/null)
+        if [[ "$is_early" ]]; then
+            if (( ${#filenames[@]} > 0 )); then
+                extract_files
+            else
+                echo "Early CPIO image"
+                list_files
+            fi
+            SKIP="$dracutbasedir/skipcpio"
+            if ! [[ -x $SKIP ]]; then
+                echo
+                echo "'$SKIP' not found, cannot display remaining contents!" >&2
+                echo
+                exit 0
+            fi
+        fi
+        ;;
+esac
+
+if [[ $SKIP ]]; then
+    read -N 6 bin < <($SKIP "$image")
+fi
+
+case $bin in
+    $'\x1f\x8b'*)
+        CAT="zcat --";;
+    BZh*)
+        CAT="bzcat --";;
+    $'\x71\xc7'*|070701)
+        CAT="cat --"
+        ;;
+    $'\x02\x21'*)
+        CAT="lz4 -d -c";;
+    *)
+        CAT="xzcat --";
+        if echo "test"|xz|xzcat --single-stream >/dev/null 2>&1; then
+            CAT="xzcat --single-stream --"
+        fi
+        ;;
+esac
+
+skipcpio()
+{
+    $SKIP "$@" | $ORIG_CAT
+}
+
+if [[ $SKIP ]]; then
+    ORIG_CAT="$CAT"
+    CAT=skipcpio
+fi
+
+ret=0
+
+if (( ${#filenames[@]} > 0 )); then
+    extract_files
+else
+    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/dracut-*' 'usr/lib/dracut/dracut-*' 2>/dev/null)
+    ((ret+=$?))
+    echo "Version: $version"
+    echo
+    echo -n "Arguments: "
+    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/build-parameter.txt' 'usr/lib/dracut/build-parameter.txt' 2>/dev/null
+    echo
+    echo "dracut modules:"
+    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/modules.txt' 'usr/lib/dracut/modules.txt' 2>/dev/null
+    ((ret+=$?))
+    list_files
 fi
 
 exit $ret

mkinitrd-dracut.sh

@@ -1,6 +1,11 @@
 #!/bin/bash --norc
 kver=$(uname -r)
 
+boot_dir="/boot"
+quiet=0
+host_only=0
+force=0
+
 error() { echo "$@" >&2; }
 
 usage () {
@@ -24,36 +29,105 @@ read_arg() {
     # $1 = arg name
     # $2 = arg value
     # $3 = arg parameter
-    local rematch='^[^=]*=(.*)$'
+    param="$1"
+    local rematch='^[^=]*=(.*)$' result
     if [[ $2 =~ $rematch ]]; then
-        read "$1" <<< "${BASH_REMATCH[1]}"
-    elif [[ $3 != -* ]]; then
-        # Only read next arg if it not an arg itself.
-        read "$1" <<< "$3"
-        # There is no way to shift our callers args, so
-        # return 1 to indicate they should do it instead.
-        return 1
+        read "$param" <<< "${BASH_REMATCH[1]}"
+    else
+	for ((i=3; $i <= $#; i++)); do
+            # Only read next arg if it not an arg itself.
+            if [[ ${@:$i:1} = -* ]];then
+		break
+            fi
+            result="$result ${@:$i:1}"
+            # There is no way to shift our callers args, so
+            # return "no of args" to indicate they should do it instead.
+	done
+	read "$1" <<< "$result"
+        return $(($i - 3))
     fi
 }
 
+# Taken over from SUSE mkinitrd
+default_kernel_images() {
+    local regex kernel_image kernel_version version_version initrd_image
+    local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
+
+    case "$(uname -m)" in
+        s390|s390x)
+            regex='image'
+            ;;
+        ppc|ppc64)
+            regex='vmlinux'
+            ;;
+        i386|x86_64)
+            regex='vmlinuz'
+            ;;
+        arm*)
+            regex='[uz]Image'
+            ;;
+        aarch64)
+            regex='Image'
+            ;;
+        *)  regex='vmlinu.'
+            ;;
+    esac
+
+    # user mode linux
+    if grep -q UML /proc/cpuinfo; then
+            regex='linux'
+    fi
+
+    kernel_images=""
+    initrd_images=""
+    for kernel_image in $(ls $boot_dir \
+            | sed -ne "\|^$regex\(-[0-9.]\+-[0-9]\+-[a-z0-9]\+$\)\?|p" \
+            | grep -v kdump$ ) ; do
+
+        # Note that we cannot check the RPM database here -- this
+        # script is itself called from within the binary kernel
+        # packages, and rpm does not allow recursive calls.
+
+        [ -L "$boot_dir/$kernel_image" ] && continue
+        [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
+        kernel_version=$(/usr/bin/get_kernel_version \
+                         $boot_dir/$kernel_image 2> /dev/null)
+        initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
+        if [ "$kernel_image" != "$initrd_image" -a \
+             -n "$kernel_version" -a \
+             -d "/lib/modules/$kernel_version" ]; then
+                kernel_images="$kernel_images $boot_dir/$kernel_image"
+                initrd_images="$initrd_images $boot_dir/$initrd_image"
+        fi
+    done
+    for kernel_image in $kernel_images;do
+	kernels="$kernels ${kernel_image#*-}"
+    done
+    for initrd_image in $initrd_images;do
+	targets="$targets $initrd_image"
+    done
+    host_only=1
+    force=1
+}
+
 while (($# > 0)); do
     case ${1%%=*} in
-        --with-usb) read_arg usbmodule "$@" || shift
+        --with-usb) read_arg usbmodule "$@" || shift $?
             basicmodules="$basicmodules ${usbmodule:-usb-storage}"
             unset usbmodule;;
-        --with-avail) read_arg modname "$@" || shift
+        --with-avail) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
-        --with) read_arg modname "$@" || shift
+        --with) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
         --version)
             echo "mkinitrd: dracut compatibility wrapper"
             exit 0;;
         -v|--verbose) dracut_args="${dracut_args} -v";;
-        -f|--force) dracut_args="${dracut_args} -f";;
-        --preload) read_arg modname "$@" || shift
+        -f|--force) force=1;;
+        --preload) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
         --image-version) img_vers=yes;;
-        --rootfs) read_arg rootfs "$@" || shift
+        --rootfs|-d) read_arg rootfs "$@" || shift $?
             dracut_args="${dracut_args} --filesystems $rootfs";;
         --nocompress) dracut_args="$dracut_args --no-compress";;
         --help) usage -n;;
@@ -80,10 +154,31 @@ while (($# > 0)); do
         --looppath*) ;;
         --dsdt*) ;;
         --bootchart) ;;
-        *) if [[ ! $target ]]; then
-            target=$1
-            elif [[ ! $kernel ]]; then
-            kernel=$1
+	-s) ;;
+	--quiet|-q) quiet=1;;
+	-b) read_arg boot_dir "$@" || shift $?
+	    if [ ! -d $boot_dir ];then
+		error "Boot directory $boot_dir does not exist"
+		exit 1
+	    fi
+	    ;;
+	-k) # Would be nice to get a list of images here
+	    read_arg kernel_images "$@" || shift $?
+	    for kernel_image in $kernel_images;do
+		kernels="$kernels ${kernel_image#*-}"
+	    done
+	    host_only=1
+	    force=1
+	    ;;
+	-i) read_arg initrd_images "$@" || shift $?
+	    for initrd_image in $initrd_images;do
+		targets="$targets $boot_dir/$initrd_image"
+	    done
+	    ;;
+        *)  if [[ ! $targets ]]; then
+            targets=$1
+            elif [[ ! $kernels ]]; then
+            kernels=$1
             else
             usage
             fi;;
@@ -91,11 +186,41 @@ while (($# > 0)); do
     shift
 done
 
-[[ $target && $kernel ]] || usage
-[[ $img_vers ]] && target="$target-$kernel"
+[[ $targets && $kernels ]] || default_kernel_images
+[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage)
 
-if [[ $basicmodules ]]; then
-        dracut $dracut_args --add-drivers "$basicmodules" "$target" "$kernel"
-else
-        dracut $dracut_args "$target" "$kernel"
-fi
+# We can have several targets/kernels, transform the list to an array
+targets=( $targets )
+[[ $kernels ]] && kernels=( $kernels )
+
+[[ $host_only == 1 ]] && dracut_args="${dracut_args} -H"
+[[ $force == 1 ]]     && dracut_args="${dracut_args} -f"
+
+echo "Creating: target|kernel|dracut args|basicmodules "
+for ((i=0 ; $i<${#targets[@]} ; i++)); do
+
+    if [[ $img_vers ]];then
+	target="${targets[$i]}-${kernels[$i]}"
+    else
+	target="${targets[$i]}"
+    fi
+    kernel="${kernels[$i]}"
+
+    # Duplicate code: No way found how to redirect output based on $quiet
+    if [[ $quiet == 1 ]];then
+	echo "$target|$kernel|$dracut_args|$basicmodules"
+	if [[ $basicmodules ]]; then
+            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel" &>/dev/null
+	else
+            dracut $dracut_args "$target" "$kernel" &>/dev/null
+	fi
+    else
+	if [[ $basicmodules ]]; then
+            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel"
+	else
+            dracut $dracut_args "$target" "$kernel"
+	fi
+    fi
+done

mkinitrd-suse.8.asc

@@ -0,0 +1,106 @@
+MKINITRD(8)
+===========
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+mkinitrd-suse - is a compat wrapper, which calls dracut to generate an initramfs
+
+SYNOPSIS
+--------
+*mkinitrd* ['OPTION...']
+
+DESCRIPTION
+-----------
+*mkinitrd* creates an initramfs image <initrd-image> for the kernel with
+version <kernel-version> by calling *dracut*.
+
+[IMPORTANT]
+This version of mkinitrd is provided for compability with older
+versions of mkinitrd. If a more fine grained control over the
+resulting image is needed, *dracut* should be called directly.
+
+OPTIONS
+-------
+**-R, --version**::
+    print info about the version
+
+**-k** _<kernel_list>_::
+    List of kernel images for which initrd files are created (relative
+    to _boot_dir_), defaults to _vmlinux_ on ppc/ppc64, _image_ on s390/s390x
+    and _vmlinuz_ for everything else.
+
+**-i** _<initrd_list>_::
+    List of file names (relative to _boot_dir_) for the initrd; positions
+    have to match the _kernel_list_. Defaults to _initrd_.
+
+**-m** _<module_list>_::
+    Modules to include in initrd, defaults to _INITRD_MODULES_ variable
+    in */etc/sysconfig/kernel*.
+
+**-f** _<feature_list>_::
+    Features to be enabled for the initrd. In general mkinitrd
+    configures the initrd for the root device it is started from. With
+    this option additional feature can be enabled.
+
+**-b** _<bootdir>_::
+    Boot directory, defaults to */boot*, where the initrd is created.
+
+**-d** _<root_device>_::
+    Root device, defaults to the device from which the root_dir is
+    mounted; overwrites the rootdev enviroment variable if set
+
+**-s** _<size>_::
+    Add splash animation and bootscreen to initrd.
+
+**-D** _<interface>::
+    Run dhcp on the specified interface (for example "eth0").
+
+**-I** _<interface>::
+    Configure the specified interface statically.
+
+**-a** _<acpi_dsdt>::
+    Attach compiled ACPI DSDT (Differentiated System Description Table)
+    to initrd. This replaces the DSDT of the BIOS. Defaults to the
+    _ACPI_DSDT_ variable in */etc/sysconfig/kernel*.
+
+**-M** _<map>::
+    System.map file to use.
+
+**-B**::
+    Don’t run the *update-bootloader(8)* script after the initrd(s) have
+    been created. This is useful if you call mkinitrd(8) for anything
+    else than the running system.
+
+**-A**::
+    Create a so called "monster initrd" which includes all available
+    features and modules.
+
+**-v, --verbose**::
+    increase verbosity level
+
+**-L**::
+    Disable logging to _/var/log/YaST2/mkinitrd.log_. This is useful for
+    testing if you don’t want to clutter the system log.
+
+**--force**::
+    overwrite existing initramfs file.
+
+**--help**::
+    print a help message and exit.
+
+AVAILABILITY
+------------
+The mkinitrd command is part of the dracut package and is available from
+link:$$https://dracut.wiki.kernel.org$$[https://dracut.wiki.kernel.org]
+
+AUTHORS
+-------
+Harald Hoyer, Hannes Reinecke
+
+SEE ALSO
+--------
+*dracut*(8)
+*update-bootloader*(8)

mkinitrd-suse.sh

@@ -0,0 +1,354 @@
+#!/bin/bash --norc
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# mkinitrd compability wrapper for SUSE.
+#
+# Copyright (c) 2013 SUSE Linux Products GmbH. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+boot_dir="/boot"
+quiet=0
+host_only=1
+force=0
+logfile=/var/log/YaST2/mkinitrd.log
+dracut_cmd=dracut
+
+error() { echo "$@" >&2; }
+
+usage () {
+    [[ $1 = '-n' ]] && cmd=echo || cmd=error
+
+    $cmd "usage: ${0##*/} [options]"
+    $cmd ""
+    $cmd "	Create initial ramdisk images that contain all kernel modules needed"
+    $cmd "	in the early boot process, before the root file system becomes"
+    $cmd "	available."
+    $cmd "	This usually includes SCSI and/or RAID modules, a file system module"
+    $cmd "	for the root file system, or a network interface driver module for dhcp."
+    $cmd ""
+    $cmd "	options:"
+    $cmd "	-f \"feature list\"	Features to be enabled when generating initrd."
+    $cmd "				Available features are:"
+    $cmd "					iscsi, md, multipath, lvm, lvm2,"
+    $cmd "					ifup, fcoe, dcbd"
+    $cmd "	-k \"kernel list\"	List of kernel images for which initrd files are"
+    $cmd "				created. Defaults to all kernels found in /boot."
+    $cmd "	-i \"initrd list\"	List of file names for the initrd; position have"
+    $cmd "				match to \"kernel list\". Defaults to all kernels"
+    $cmd "				found in /boot."
+    $cmd "	-b boot_dir		Boot directory. Defaults to /boot."
+    $cmd "	-t tmp_dir		Temporary directory. Defaults to /var/tmp."
+    $cmd "	-M map			System.map file to use."
+    $cmd "	-A			Create a so called \"monster initrd\" which"
+    $cmd "				includes all features and modules possible."
+    $cmd "	-B			Do not update bootloader configuration."
+    $cmd "	-v			Verbose mode."
+    $cmd "	-L			Disable logging."
+    $cmd "	-h			This help screen."
+    $cmd "	-m \"module list\"	Modules to include in initrd. Defaults to the"
+    $cmd "				INITRD_MODULES variable in /etc/sysconfig/kernel"
+    $cmd "	-u \"DomU module list\"	Modules to include in initrd. Defaults to the"
+    $cmd "				DOMU_INITRD_MODULES variable in"
+    $cmd "				/etc/sysconfig/kernel."
+    $cmd "	-d root_device		Root device. Defaults to the device from"
+    $cmd "				which / is mounted. Overrides the rootdev"
+    $cmd "				enviroment variable if set."
+    $cmd "	-j device		Journal device"
+    $cmd "	-D interface		Run dhcp on the specified interface."
+    $cmd "	-I interface		Configure the specified interface statically."
+    $cmd "	-a acpi_dsdt		Attach compiled ACPI DSDT (Differentiated"
+    $cmd "				System Description Table) to initrd. This"
+    $cmd "				replaces the DSDT of the BIOS. Defaults to"
+    $cmd "				the ACPI_DSDT variable in /etc/sysconfig/kernel."
+    $cmd "	-s size			Add splash animation and bootscreen to initrd."
+
+    [[ $1 = '-n' ]] && exit 0
+    exit 1
+}
+
+# Little helper function for reading args from the commandline.
+# it automatically handles -a b and -a=b variants, and returns 1 if
+# we need to shift $3.
+read_arg() {
+    # $1 = arg name
+    # $2 = arg value
+    # $3 = arg parameter
+    param="$1"
+    local rematch='^[^=]*=(.*)$' result
+    if [[ $2 =~ $rematch ]]; then
+        read "$param" <<< "${BASH_REMATCH[1]}"
+    else
+	for ((i=3; $i <= $#; i++)); do
+            # Only read next arg if it not an arg itself.
+            if [[ ${@:$i:1} = -* ]];then
+		break
+            fi
+            result="$result ${@:$i:1}"
+            # There is no way to shift our callers args, so
+            # return "no of args" to indicate they should do it instead.
+	done
+	read "$1" <<< "$result"
+        return $(($i - 3))
+    fi
+}
+
+# Helper functions to calculate ipconfig command line
+calc_netmask() {
+    local prefix=$1
+
+    [ -z "$prefix" ] && return
+    mask=$(echo "(2 ^ 32) - (2 ^ $prefix)" | bc -l)
+    byte1=$(( mask >> 24 ))
+    byte2=$(( mask >> 16 ))
+    byte3=$(( mask >> 8 ))
+    byte4=$(( mask & 0xff ))
+    netmask=$(printf "%d.%d.%d.%d" $(( byte1 & 0xff )) $(( byte2 & 0xff )) $(( byte3 & 0xff )) $byte4);
+
+    echo $netmask
+}
+
+ipconfig() {
+    local interface=$1
+    local iplink macaddr broadcast gateway ipaddr prefix netmask
+
+    iplink=$(ip addr show dev $interface | sed -n 's/ *inet \(.*\) brd.*/\1/p')
+    macaddr=$(ip addr show dev $interface | sed -n 's/.*ether \(.*\) brd.*/\1/p')
+    broadcast=$(ip addr show dev $interface | sed -n 's/.*brd \(.*\) scope.*/\1/p')
+    gateway=$(ip route show dev $interface | sed -n 's/default via \([0-9\.]*\).*/\1/p')
+
+    ipaddr=${iplink%%/*}
+    prefix=${iplink##*/}
+    netmask=$(calc_netmask $prefix)
+
+    echo "${ipaddr}:${serveraddr}:${gateway}:${netmask}:${hostname}:${interface}:none::${macaddr}"
+}
+
+is_xen_kernel() {
+    local kversion=$1
+    local root_dir=$2
+    local cfg
+
+    for cfg in ${root_dir}/boot/config-$kversion $root_dir/lib/modules/$kversion/build/.config
+    do
+        test -r $cfg || continue
+        grep -q "^CONFIG_XEN=y\$" $cfg
+        return
+    done
+    test $kversion != "${kversion%-xen*}"
+    return
+}
+
+
+# Taken over from SUSE mkinitrd
+default_kernel_images() {
+    local regex kernel_image kernel_version version_version initrd_image
+    local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
+
+    case "$(uname -m)" in
+        s390|s390x)
+            regex='image'
+            ;;
+        ppc|ppc64)
+            regex='vmlinux'
+            ;;
+        i386|x86_64)
+            regex='vmlinuz'
+            ;;
+        arm*)
+            regex='[uz]Image'
+            ;;
+        aarch64)
+            regex='Image'
+            ;;
+        *)  regex='vmlinu.'
+            ;;
+    esac
+
+    kernel_images=""
+    initrd_images=""
+    for kernel_image in $(ls $boot_dir \
+            | sed -ne "\|^$regex\(-[0-9.]\+-[0-9]\+-[a-z0-9]\+$\)\?|p" \
+            | grep -v kdump$ ) ; do
+
+        # Note that we cannot check the RPM database here -- this
+        # script is itself called from within the binary kernel
+        # packages, and rpm does not allow recursive calls.
+
+        [ -L "$boot_dir/$kernel_image" ] && continue
+        [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
+        kernel_version=$(/usr/bin/get_kernel_version \
+                         $boot_dir/$kernel_image 2> /dev/null)
+        initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
+        if [ "$kernel_image" != "$initrd_image" -a \
+             -n "$kernel_version" -a \
+             -d "/lib/modules/$kernel_version" ]; then
+                kernel_images="$kernel_images $boot_dir/$kernel_image"
+                initrd_images="$initrd_images $boot_dir/$initrd_image"
+        fi
+    done
+    for kernel_image in $kernel_images;do
+	kernels="$kernels ${kernel_image#*-}"
+    done
+    for initrd_image in $initrd_images;do
+	targets="$targets $initrd_image"
+    done
+    host_only=1
+    force=1
+}
+
+while (($# > 0)); do
+    case ${1%%=*} in
+	-f) read_arg feature_list "$@" || shift $?
+	    # Could be several features
+	    ;;
+	-k) # Would be nice to get a list of images here
+	    read_arg kernel_images "$@" || shift $?
+	    for kernel_image in $kernel_images;do
+		kernels="$kernels ${kernel_image#*-}"
+	    done
+	    host_only=1
+	    force=1
+	    ;;
+	-i) read_arg initrd_images "$@" || shift $?
+	    for initrd_image in $initrd_images;do
+		# Check if the initrd_image contains a path.
+		# if not, then add the default boot_dir
+		dname=`dirname $initrd_image`
+		if [ "$dname" == "." ]; then
+                    targets="$targets $boot_dir/$initrd_image";
+		else
+                    targets="$targets $initrd_image";
+		fi
+	    done
+	    ;;
+	-b) read_arg boot_dir "$@" || shift $?
+	    if [ ! -d $boot_dir ];then
+		error "Boot directory $boot_dir does not exist"
+		exit 1
+	    fi
+	    ;;
+	-t) read_arg tmp_dir "$@" || shift $?
+	    dracut_args="${dracut_args} --tmpdir $tmp_dir"
+	    ;;
+	-M) read_arg map_file "$@" || shift $?
+	    ;;
+	-A) host_only=0;;
+	-B) skip_update_bootloader=1;;
+        -v|--verbose) dracut_args="${dracut_args} -v";;
+	-L) logfile=;;
+        -h|--help) usage -n;;
+	-m) read_arg module_list "$@" || shift $? ;;
+	-u) read_arg domu_module_list "$@" || shift $?
+	    echo "mkinitrd: DomU modules not yet supported" ;;
+        -d) read_arg rootfs "$@" || shift $?
+            dracut_args="${dracut_args} --filesystems $rootfs" ;;
+	-D) read_arg dhcp_if "$@" || shift $?
+	    dracut_cmdline="${dracut_cmdline} ip=${dhcp_if}:dhcp"
+	    ;;
+	-I) read_arg static_if "$@" || shift $?
+	    dracut_cmdline="${dracut_cmdline} ip=$(ipconfig $static_if)":
+	    ;;
+	-a) read_arg acpi_dsdt "$@" || shift $?
+	    echo "mkinitrd: custom DSDT not yet supported"
+	    exit 1
+	    ;;
+	-s) read_arg boot_splash "$@" || shift $?
+	    echo "mkinitrd: boot splash not yet supported"
+	    exit 1
+	    ;;
+	-V) echo "mkinitrd: vendor scipts are no longer supported"
+	    exit 1;;
+	--dracut)
+	    read_arg dracut_cmd "$@" || shift $? ;;
+        --version|-R)
+            echo "mkinitrd: dracut compatibility wrapper"
+            exit 0;;
+        --force) force=1;;
+	--quiet|-q) quiet=1;;
+        *)  if [[ ! $targets ]]; then
+            targets=$1
+            elif [[ ! $kernels ]]; then
+            kernels=$1
+            else
+            usage
+            fi;;
+    esac
+    shift
+done
+
+[[ $targets && $kernels ]] || default_kernel_images
+[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage)
+
+# We can have several targets/kernels, transform the list to an array
+targets=( $targets )
+[[ $kernels ]] && kernels=( $kernels )
+
+[[ $logfile ]]        && dracut_args="${dracut_args} --logfile $logfile"
+[[ $host_only == 1 ]] && dracut_args="${dracut_args} --hostonly"
+[[ $force == 1 ]]     && dracut_args="${dracut_args} --force"
+[[ $dracut_cmdline ]] && dracut_args="${dracut_args} --kernel-cmdline ${dracut_cmdline}"
+[ -z "$(type -p update-bootloader)" ] && skip_update_bootloader=1
+
+# Update defaults from /etc/sysconfig/kernel
+if [ -f /etc/sysconfig/kernel ] ; then
+    . /etc/sysconfig/kernel
+fi
+[[ $module_list ]] || module_list="${INITRD_MODULES}"
+basicmodules="$basicmodules ${module_list}"
+[[ $domu_module_list ]] || domu_module_list="${DOMU_INITRD_MODULES}"
+[[ $acpi_dsdt ]] || acpi_dsdt="${ACPI_DSDT}"
+
+echo "Creating: target|kernel|dracut args|basicmodules "
+for ((i=0 ; $i<${#targets[@]} ; i++)); do
+
+    if [[ $img_vers ]];then
+	target="${targets[$i]}-${kernels[$i]}"
+    else
+	target="${targets[$i]}"
+    fi
+    kernel="${kernels[$i]}"
+
+    # Duplicate code: No way found how to redirect output based on $quiet
+    if [[ $quiet == 1 ]];then
+	echo "$target|$kernel|$dracut_args|$basicmodules"
+	if is_xen_kernel $kernel $rootfs ; then
+	    basicmodules="$basicmodules ${domu_module_list}"
+	fi
+	if [[ $basicmodules ]]; then
+            $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel" &>/dev/null
+	else
+            $dracut_cmd $dracut_args "$target" "$kernel" &>/dev/null
+	fi
+    else
+	if is_xen_kernel $kernel $rootfs ; then
+	    basicmodules="$basicmodules ${domu_module_list}"
+	fi
+	if [[ $basicmodules ]]; then
+            $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel"
+	else
+            $dracut_cmd $dracut_args "$target" "$kernel"
+	fi
+    fi
+done
+
+if [ "$skip_update_bootloader" ] ; then
+    echo 2>&1 "Did not refresh the bootloader. You might need to refresh it manually."
+else
+    update-bootloader --refresh
+fi

mkinitrd.8.asc

@@ -41,8 +41,8 @@ OPTIONS
 
 **--preload=<module>**::
      preload the kernel module <module> in the initramfs before any other kernel
-     modules are loaded. This can be used to ensure a certain device naming, which
-     should in theory be avoided and the use of symbolic links in /dev is
+     modules are loaded. This can be used to ensure a certain device naming,
+     which should in theory be avoided and the use of symbolic links in /dev is
      encouraged.
 
 **--nocompress**::

modules.d/00bash/module-setup.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+# called by dracut
+check() {
+    require_binaries /bin/bash
+}
+
+# called by dracut
+depends() {
+    return 0
+}
+
+# called by dracut
+install() {
+    # If another shell is already installed, do not use bash
+    [[ -x $initdir/bin/sh ]] && return
+
+    # Prefer bash as /bin/sh if it is available.
+    inst /bin/bash && ln -sf bash "${initdir}/bin/sh"
+}
+

modules.d/00bootchart/module-setup.sh

@@ -2,21 +2,24 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
-    [ -x /sbin/bootchartd ] || return 1
+    require_binaries /sbin/bootchartd || return 1
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     inst_symlink /init /sbin/init
     inst_dir /lib/bootchart/tmpfs
 
-    dracut_install bootchartd bash \
+    inst_multiple bootchartd bash \
         /lib/bootchart/bootchart-collector /etc/bootchartd.conf \
         accton \
         echo \

modules.d/00dash/module-setup.sh

@@ -2,14 +2,17 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
-    [ -x /bin/dash ]
+    require_binaries /bin/dash
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     # If another shell is already installed, do not use dash
     [[ -x $initdir/bin/sh ]] && return

modules.d/00systemd-bootchart/module-setup.sh

@@ -2,17 +2,20 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
-    [ -x $systemdutildir/systemd-bootchart ] || return 1
+    require_binaries $systemdutildir/systemd-bootchart || return 1
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     inst_symlink /init /sbin/init
-    dracut_install $systemdutildir/systemd-bootchart
+    inst_multiple $systemdutildir/systemd-bootchart
 }

modules.d/01fips/fips.sh

@@ -60,8 +60,8 @@ do_rhevh_check()
     KERNEL=$(uname -r)
     kpath=${1}
 
-    # If we're on RHEV-H, the kernel is in /dev/.initramfs/live/vmlinuz0
-    HMAC_SUM_ORIG=$(cat /boot/.vmlinuz-${KERNEL}.hmac | while read a b; do printf "%s\n" $a; done)
+    # If we're on RHEV-H, the kernel is in /run/initramfs/live/vmlinuz0
+    HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b; do printf "%s\n" $a; done)
     HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b; do printf "%s\n" $a; done || return 1)
     if [ -z "$HMAC_SUM_ORIG" ] || [ -z "$HMAC_SUM_CALC" ] || [ "${HMAC_SUM_ORIG}" != "${HMAC_SUM_CALC}" ]; then
         warn "HMAC sum mismatch"
@@ -96,7 +96,6 @@ do_fips()
                 _found=0
                 while read _k _s _v; do
                     [ "$_k" != "name" -a "$_k" != "driver" ] && continue
-                    [ "$_k" = "driver" ] && _v=$(str_replace "$_v" "_" "-")
                     [ "$_v" != "$_module" ] && continue
                     _found=1
                     break
@@ -112,10 +111,10 @@ do_fips()
     rmmod tcrypt
 
     info "Checking integrity of kernel"
-    if [ -e "$NEWROOT/dev/.initramfs/live/vmlinuz0" ]; then
-        do_rhevh_check "$NEWROOT/dev/.initramfs/live/vmlinuz0" || return 1
-    elif [ -e "$NEWROOT/dev/.initramfs/live/isolinux/vmlinuz0" ]; then
-        do_rhevh_check "$NEWROOT/dev/.initramfs/live/isolinux/vmlinuz0" || return 1
+    if [ -e "/run/initramfs/live/vmlinuz0" ]; then
+        do_rhevh_check /run/initramfs/live/vmlinuz0 || return 1
+    elif [ -e "/run/initramfs/live/isolinux/vmlinuz0" ]; then
+        do_rhevh_check /run/initramfs/live/isolinux/vmlinuz0 || return 1
     else
         sha512hmac -c "/boot/.vmlinuz-${KERNEL}.hmac" || return 1
     fi

modules.d/01fips/module-setup.sh

@@ -2,18 +2,21 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 installkernel() {
     local _fipsmodules _mod
     _fipsmodules="aead aes_generic aes-x86_64 ansi_cprng arc4 blowfish camellia cast6 cbc ccm "
-    _fipsmodules+="chainiv crc32c cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod "
+    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod "
     _fipsmodules+="ecb eseqiv fcrypt gcm ghash_generic hmac khazad lzo md4 md5 michael_mic rmd128 "
     _fipsmodules+="rmd160 rmd256 rmd320 rot13 salsa20 seed seqiv serpent sha1 sha224 sha256 sha256_generic "
     _fipsmodules+="sha384 sha512 sha512_generic tcrypt tea tnepres twofish wp256 wp384 wp512 xeta xtea xts zlib"
@@ -28,18 +31,20 @@ installkernel() {
     done
 }
 
+# called by dracut
 install() {
     local _dir
     inst_hook pre-trigger 01 "$moddir/fips-boot.sh"
     inst_hook pre-pivot 01 "$moddir/fips-noboot.sh"
     inst_script "$moddir/fips.sh" /sbin/fips.sh
 
-    dracut_install sha512hmac rmmod insmod mount uname umount fipscheck
+    inst_multiple sha512hmac rmmod insmod mount uname umount fipscheck
 
     inst_libdir_file libsoftokn3.so libsoftokn3.so \
         libsoftokn3.chk libfreebl3.so libfreebl3.chk \
         libssl.so 'hmaccalc/sha512hmac.hmac' libssl.so.10
 
-    dracut_install -o prelink
+    inst_multiple -o prelink
+    inst_simple /etc/system-fips
 }
 

modules.d/02caps/module-setup.sh

@@ -2,18 +2,25 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
-    type -P capsh >/dev/null 2>&1
+    require_binaries capsh
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
-    inst_hook pre-pivot 00 "$moddir/caps.sh"
-    inst $(type -P capsh 2>/dev/null) /usr/sbin/capsh
-    # capsh wants bash and we need bash also
-    inst /bin/bash
+    if ! dracut_module_included "systemd"; then
+        inst_hook pre-pivot 00 "$moddir/caps.sh"
+        inst $(type -P capsh 2>/dev/null) /usr/sbin/capsh
+        # capsh wants bash and we need bash also
+        inst /bin/bash
+    else
+        dwarning "caps: does not work with systemd in the initramfs"
+    fi
 }
 

modules.d/02fips-aesni/module-setup.sh

@@ -2,14 +2,17 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 installkernel() {
     local _fipsmodules _mod
     _fipsmodules="aesni-intel ghash_clmulni_intel"
@@ -24,6 +27,7 @@ installkernel() {
     done
 }
 
+# called by dracut
 install() {
     return 0
 }

modules.d/03modsign/module-setup.sh

@@ -7,8 +7,9 @@
 # Copyright 2013 Red Hat, Inc.
 # Peter Jones <pjones@redhat.com>
 
+# called by dracut
 check() {
-    [[ -x /usr/bin/keyctl ]] || return 1
+    require_binaries keyctl || return 1
 
     # do not include module in hostonly mode,
     # if no keys are present
@@ -20,10 +21,12 @@ check() {
     return 0
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     inst_dir /lib/modules/keys
     inst_binary /usr/bin/keyctl

modules.d/03rescue/module-setup.sh

@@ -2,17 +2,20 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     # do not add this module by default
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
-    dracut_install -o ps grep more cat rm strace free showmount \
+    inst_multiple -o ps grep more cat rm strace free showmount \
         ping netstat rpcinfo vi scp ping6 ssh \
         fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
 }

modules.d/04watchdog/module-setup.sh

@@ -2,14 +2,17 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     inst_hook cmdline   00 "$moddir/watchdog.sh"
     inst_hook cmdline   50 "$moddir/watchdog.sh"
@@ -23,6 +26,6 @@ install() {
     inst_hook cleanup   00 "$moddir/watchdog.sh"
     inst_hook cleanup   99 "$moddir/watchdog.sh"
     inst_hook emergency 02 "$moddir/watchdog-stop.sh"
-    dracut_install -o wdctl
+    inst_multiple -o wdctl
 }
 

modules.d/05busybox/module-setup.sh

@@ -2,16 +2,19 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
-    type -P busybox >/dev/null || return 1
+    require_binaries busybox || return 1
 
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     local _i _progs _path _busybox
     _busybox=$(type -P busybox)

modules.d/10i18n/module-setup.sh

@@ -2,26 +2,28 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
+
+    require_binaries setfont loadkeys kbd_mode || return 1
+
     return 0
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     if dracut_module_included "systemd"; then
-        [[ -f /etc/vconsole.conf ]] || return 0
         unset FONT
         unset KEYMAP
-        . /etc/vconsole.conf
-        # if vconsole.conf has no settings, do not include anything
-        [[ $FONT ]] || [[ $KEYMAP ]] || return 0
+        [[ -f /etc/vconsole.conf ]] && . /etc/vconsole.conf
     fi
 
-    dracut_install -o $systemdutildir/systemd-vconsole-setup
     KBDSUBDIRS=consolefonts,consoletrans,keymaps,unimaps
     DEFAULT_FONT="${i18n_default_font:-LatArCyrHeb-16}"
     I18N_CONF="/etc/locale.conf"
@@ -93,7 +95,7 @@ install() {
     }
 
     install_base() {
-        dracut_install setfont loadkeys kbd_mode stty
+        inst_multiple setfont loadkeys kbd_mode stty
 
         if ! dracut_module_included "systemd"; then
             inst ${moddir}/console_init.sh /lib/udev/console_init
@@ -115,12 +117,12 @@ install() {
         find "${initdir}${kbddir}/" -name README\* -delete
         find "${initdir}${kbddir}/" -name '*.gz' -print -quit \
             | while read line; do
-            dracut_install gzip
+            inst_multiple gzip
             done
 
         find "${initdir}${kbddir}/" -name '*.bz2' -print -quit \
             | while read line; do
-            dracut_install bzip2
+            inst_multiple bzip2
             done
     }
 
@@ -153,6 +155,9 @@ install() {
         # Gentoo user may have KEYMAP set to something like "-u pl2",
         KEYMAP=${KEYMAP#-* }
 
+        # openSUSE user may have KEYMAP set to something like ".gz"
+        KEYMAP=${KEYMAP/.gz/}
+
         # KEYTABLE is a bit special - it defines base keymap name and UNICODE
         # determines whether non-UNICODE or UNICODE version is used
 
@@ -202,10 +207,20 @@ install() {
             inst_simple ${kbddir}/unimaps/${FONT_UNIMAP}.uni
         fi
 
-        mksubdirs ${initdir}${I18N_CONF}
-        mksubdirs ${initdir}${VCONFIG_CONF}
-        print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
-        print_vars KEYMAP EXT_KEYMAPS UNICODE FONT FONT_MAP FONT_UNIMAP >> ${initdir}${VCONFIG_CONF}
+        if dracut_module_included "systemd" && [[ -f ${I18N_CONF} ]]; then
+            inst_simple ${I18N_CONF}
+        else
+            mksubdirs ${initdir}${I18N_CONF}
+            print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
+        fi
+
+        if dracut_module_included "systemd" && [[ -f ${VCONFIG_CONF} ]]; then
+            inst_simple ${VCONFIG_CONF}
+        else
+            mksubdirs ${initdir}${VCONFIG_CONF}
+            print_vars KEYMAP EXT_KEYMAPS UNICODE FONT FONT_MAP FONT_UNIMAP >> ${initdir}${VCONFIG_CONF}
+        fi
+
         return 0
     }
 
@@ -229,16 +244,13 @@ install() {
         return 0
     }
 
-    if checks
-    then
+    if checks; then
         install_base
 
-        if [[ ${hostonly} ]]
-        then
+        if [[ ${hostonly} ]] && ! [[ ${i18n_install_all} ]]; then
             install_local_i18n || install_all_kbd
         else
             install_all_kbd
         fi
     fi
 }
-

modules.d/10i18n/parse-i18n.sh

@@ -6,37 +6,30 @@ inst_key_val() {
     local _value
     local _file
     local _default
-    _default=$1
-    shift
-    _file=$1
-    shift
-    _value=$(getarg $@)
+    _file="$1"; shift
+    _key="$1"; shift
+    _default="$1"; shift
+    _value="$(getarg $@)"
     [ -z "${_value}" ] && _value=$_default
     if [ -n "${_value}" ]; then
-        printf '%s="%s"\n' $2 ${_value} >> $_file
+        printf '%s="%s"\n' $key ${_value} >> $_file
     fi
     unset _file
     unset _value
 }
 
-inst_key_val '' /etc/vconsole.conf vconsole.keymap      KEYMAP      -d KEYTABLE
-inst_key_val '' /etc/vconsole.conf vconsole.font        FONT        -d SYSFONT
-inst_key_val '' /etc/vconsole.conf vconsole.font.map    FONT_MAP    -d CONTRANS
-inst_key_val '' /etc/vconsole.conf vconsole.font.unimap FONT_UNIMAP -d UNIMAP
-inst_key_val 1  /etc/vconsole.conf vconsole.font.unicode UNICODE vconsole.unicode
-inst_key_val '' /etc/vconsole.conf vconsole.keymap.ext  EXT_KEYMAP
+inst_key_val /etc/vconsole.conf KEYMAP      '' rd.vconsole.keymap       KEYMAP      -d KEYTABLE
+inst_key_val /etc/vconsole.conf FONT        '' rd.vconsole.font         FONT        -d SYSFONT
+inst_key_val /etc/vconsole.conf FONT_MAP    '' rd.vconsole.font.map     FONT_MAP    -d CONTRANS
+inst_key_val /etc/vconsole.conf FONT_UNIMAP '' rd.vconsole.font.unimap  FONT_UNIMAP -d UNIMAP
+inst_key_val /etc/vconsole.conf UNICODE      1 rd.vconsole.font.unicode UNICODE vconsole.unicode
+inst_key_val /etc/vconsole.conf EXT_KEYMAP  '' rd.vconsole.keymap.ext   EXT_KEYMAP
 
-inst_key_val '' /etc/locale.conf   locale.LANG   LANG
-inst_key_val '' /etc/locale.conf   locale.LC_ALL LC_ALL
+inst_key_val /etc/locale.conf   LANG        '' rd.locale.LANG           LANG
+inst_key_val /etc/locale.conf   LC_ALL      '' rd.locale.LC_ALL         LC_ALL
 
 if [ -f /etc/locale.conf ]; then
     . /etc/locale.conf
     export LANG
     export LC_ALL
 fi
-
-if [ -n "$DRACUT_SYSTEMD" ]; then
-    rm -f -- /etc/udev/rules.d/10-console.rules
-    rm -f -- /lib/udev/rules.d/10-console.rules
-    rm -f -- /lib/udev/console_init
-fi

modules.d/30convertfs/module-setup.sh

@@ -2,17 +2,20 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     [[ $mount_needs ]] && return 1
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
-    dracut_install bash find ldconfig mv rm cp ln
+    inst_multiple bash find ldconfig mv rm cp ln
     inst_hook pre-pivot 99 "$moddir/do-convertfs.sh"
     inst_script "$moddir/convertfs.sh" /usr/bin/convertfs
 }

modules.d/40network/dhclient-script.sh

@@ -2,6 +2,17 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+PATH=/usr/sbin:/usr/bin:/sbin:/bin
+
+type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
+
+# We already need a set netif here
+netif=$interface
+
+# Huh? Interface configured?
+[ -f "/tmp/net.$netif.up" ] && exit 0
+
 setup_interface() {
     ip=$new_ip_address
     mtu=$new_interface_mtu
@@ -12,6 +23,7 @@ setup_interface() {
     search=$(printf -- "$new_domain_search")
     namesrv=$new_domain_name_servers
     hostname=$new_host_name
+    lease_time=$new_dhcp_lease_time
 
     [ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override
 
@@ -29,7 +41,9 @@ setup_interface() {
         fi
     fi
 
-    ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} dev $netif
+    ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} \
+        valid_lft ${lease_time} preferred_lft ${lease_time} \
+        dev $netif
 
     [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
 
@@ -42,27 +56,45 @@ setup_interface() {
 
     # Note: hostname can be fqdn OR short hostname, so chop off any
     # trailing domain name and explicity add any domain if set.
-    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
+    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 }
 
-PATH=/usr/sbin:/usr/bin:/sbin:/bin
+setup_interface6() {
+    domain=$new_domain_name
+    search=$(printf -- "$new_domain_search")
+    namesrv=$new_domain_name_servers
+    hostname=$new_host_name
+    lease_time=$new_dhcp_lease_time
 
-export PS4="dhclient.$interface.$$ + "
-exec >>/run/initramfs/loginit.pipe 2>>/run/initramfs/loginit.pipe
-type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
-type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
+    [ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override
 
-# We already need a set netif here
-netif=$interface
+    ip -6 addr add ${new_ip6_address}/${new_ip6_prefixlen} \
+        dev ${netif} scope global valid_lft ${lease_time} \
+        preferred_lft ${lease_time}
 
-# Huh? Interface configured?
-[ -f "/tmp/net.$netif.up" ] && exit 0
+    [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
+    if  [ -n "$namesrv" ] ; then
+        for s in $namesrv; do
+            echo nameserver $s
+        done
+    fi >> /tmp/net.$netif.resolv.conf
+
+    # Note: hostname can be fqdn OR short hostname, so chop off any
+    # trailing domain name and explicity add any domain if set.
+    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
+}
 
 case $reason in
     PREINIT)
         echo "dhcp: PREINIT $netif up"
         linkup $netif
         ;;
+
+    PREINIT6)
+        echo "dhcp: PREINIT $netif up"
+        linkup $netif
+        ;;
+
     BOUND)
         echo "dhcp: BOND setting $netif"
         unset layer2
@@ -87,12 +119,31 @@ case $reason in
             echo "setup_net $netif"
             echo "source_hook initqueue/online $netif"
             [ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
-            echo "> /tmp/setup_net_$netif.ok"
-            echo "> /tmp/setup_net_\$(cat /sys/class/net/$netif/address).ok"
             echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
         } > $hookdir/initqueue/setup_net_$netif.sh
 
-        echo "[ -f /tmp/setup_net_$netif.ok ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
+        echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
+        >/tmp/net.$netif.up
+        ;;
+
+    BOUND6)
+        echo "dhcp: BOND6 setting $netif"
+        setup_interface6
+
+        set | while read line; do
+            [ "${line#new_}" = "$line" ] && continue
+            echo "$line"
+        done >/tmp/dhclient.$netif.dhcpopts
+
+        {
+            echo '. /lib/net-lib.sh'
+            echo "setup_net $netif"
+            echo "source_hook initqueue/online $netif"
+            [ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
+            echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
+        } > $hookdir/initqueue/setup_net_$netif.sh
+
+        echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
         >/tmp/net.$netif.up
         ;;
     *) echo "dhcp: $reason";;

modules.d/40network/dhcp-root.sh

@@ -2,20 +2,24 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-# Don't continue if root is ok
-[ -n "$rootok" ] && return
-
 # This script is sourced, so root should be set. But let's be paranoid
 [ -z "$root" ] && root=$(getarg root=)
-[ -z "$netroot" ] && netroot=$(getarg netroot=)
 
-if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] ; then
+if [ -z "$netroot" ]; then
+    for netroot in $(getargs netroot=); do
+        [ "$netroot" = "dhcp" ] && break
+        [ "$netroot" = "dhcp6" ] && break
+    done
+    [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] || unset netroot
+fi
+
+if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ]; then
     # Tell ip= checker that we need dhcp
     NEEDDHCP="1"
 
     # Done, all good!
     rootok=1
-    if [ "$netroot" != "dhcp" ] ; then
+    if [ "$netroot" != "dhcp" ] && [ "$netroot" != "dhcp6" ]; then
         netroot=$root
     fi
 

modules.d/40network/ifup.sh

@@ -80,13 +80,26 @@ fi
 # in netroot case we prefer netroot to bringup $netif automaticlly
 [ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2"
 [ -z "$netroot" ] && [ -z "$manualup" ] && exit 0
-[ -n "$manualup" ] && >/tmp/net.$netif.manualup
+if [ -n "$manualup" ]; then
+    >/tmp/net.$netif.manualup
+else
+    [ -e /tmp/net.${netif}.did-setup ] && exit 0
+    [ -e /sys/class/net/$netif/address ] && \
+        [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && exit 0
+fi
 
 # Run dhclient
 do_dhcp() {
     # dhclient-script will mark the netif up and generate the online
     # event for nfsroot
     # XXX add -V vendor class and option parsing per kernel
+
+    [ -e /tmp/dhclient.$netif.pid ] && return 0
+
+    if ! iface_has_link $netif; then
+        echo "No carrier detected"
+        return 1
+    fi
     echo "Starting dhcp for interface $netif"
     dhclient "$@" -1 -q -cf /etc/dhclient.conf -pf /tmp/dhclient.$netif.pid -lf /tmp/dhclient.$netif.lease $netif \
         || echo "dhcp failed"
@@ -124,16 +137,16 @@ do_static() {
     [ -n "$mtu" ] && ip link set mtu $mtu dev $netif
     if strstr $ip '*:*:*'; then
         # note no ip addr flush for ipv6
-        ip addr add $ip/$mask ${srv+peer $srv} dev $netif
+        ip addr add $ip/$mask ${srv:+peer $srv} dev $netif
+        wait_for_ipv6_dad $netif
     else
         ip addr flush dev $netif
-        ip addr add $ip/$mask ${srv+peer $srv} brd + dev $netif
+        ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif
     fi
 
     [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
     [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 
-    > /tmp/setup_net_${netif}.ok
     return 0
 }
 
@@ -260,18 +273,15 @@ if [ "$netif" = "$vlanname" ] && [ ! -e /tmp/net.$vlanname.up ]; then
     ip link set "$vlanname" up
 fi
 
-# setup nameserver
-namesrv=$(getargs nameserver)
-if  [ -n "$namesrv" ] ; then
-    for s in $namesrv; do
-        echo nameserver $s
-    done
-fi >> /tmp/net.$netif.resolv.conf
-
 # No ip lines default to dhcp
 ip=$(getarg ip)
 
 if [ -z "$ip" ]; then
+    namesrv=$(getargs nameserver)
+    for s in $namesrv; do
+        echo nameserver $s >> /tmp/net.$netif.resolv.conf
+    done
+
     if [ "$netroot" = "dhcp6" ]; then
         do_dhcp -6
     else
@@ -303,8 +313,14 @@ for p in $(getargs ip=); do
     [ "$use_bridge" != 'true' ] && \
     [ "$use_vlan" != 'true' ] && continue
 
+    # setup nameserver
+    namesrv="$dns1 $dns2 $(getargs nameserver)"
+    for s in $namesrv; do
+        echo nameserver $s >> /tmp/net.$netif.resolv.conf
+    done
+
     # Store config for later use
-    for i in ip srv gw mask hostname macaddr; do
+    for i in ip srv gw mask hostname macaddr dns1 dns2; do
         eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
     done > /tmp/net.$netif.override
 
@@ -312,6 +328,7 @@ for p in $(getargs ip=); do
         dhcp|on|any)
             do_dhcp -4 ;;
         dhcp6)
+            load_ipv6
             do_dhcp -6 ;;
         auto6)
             do_ipv6auto ;;
@@ -319,6 +336,8 @@ for p in $(getargs ip=); do
             do_static ;;
     esac
 
+    > /tmp/net.${netif}.up
+
     case $autoconf in
         dhcp|on|any|dhcp6)
             ;;
@@ -333,6 +352,19 @@ for p in $(getargs ip=); do
             ;;
     esac
 
-    break
+    exit 0
 done
+
+# netif isn't the top stack? Then we should exit here.
+# eg. netif is bond0. br0 is on top of it. dhcp br0 is correct but dhcp
+#     bond0 doesn't make sense.
+if [ -n "$DO_BOND_SETUP" -o -n "$DO_TEAM_SETUP" -o -n "$DO_VLAN_SETUP" ]; then
+    exit 0
+fi
+
+# no ip option directed at our interface?
+if [ ! -e /tmp/net.${netif}.up ]; then
+    do_dhcp -4
+fi
+
 exit 0

modules.d/40network/module-setup.sh

@@ -2,30 +2,27 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     local _program
 
-    for _program in ip arping dhclient ; do
-        if ! type -P $_program >/dev/null; then
-            derror "Could not find program \"$_program\" required by network."
-            return 1
-        fi
-    done
+    require_binaries ip arping dhclient || return 1
 
     return 255
 }
 
+# called by dracut
 depends() {
-    [ -d /etc/sysconfig/network-scripts/ ] && echo ifcfg
     return 0
 }
 
+# called by dracut
 installkernel() {
     # Include wired net drivers, excluding wireless
 
     net_module_filter() {
-        local _net_drivers='eth_type_trans|register_virtio_device'
-        local _unwanted_drivers='/(wireless|isdn|uwb)/'
+        local _net_drivers='eth_type_trans|register_virtio_device|usbnet_open'
+        local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
         local _ret
         # subfunctions inherit following FDs
         local _merge=8 _side2=9
@@ -65,15 +62,20 @@ installkernel() {
         | net_module_filter | instmods
 
     #instmods() will take care of hostonly
-    instmods =drivers/net/phy ecb arc4 bridge stp llc ipv6 bonding 8021q af_packet virtio_net =drivers/net/team
+    instmods \
+        =drivers/net/phy \
+        =drivers/net/team \
+        =drivers/net/ethernet \
+        ecb arc4 bridge stp llc ipv6 bonding 8021q af_packet virtio_net
 }
 
+# called by dracut
 install() {
     local _arch _i _dir
-    dracut_install ip arping dhclient sed
-    dracut_install -o ping ping6
-    dracut_install -o brctl
-    dracut_install -o teamd teamdctl teamnl
+    inst_multiple ip arping dhclient sed
+    inst_multiple -o ping ping6
+    inst_multiple -o brctl
+    inst_multiple -o teamd teamdctl teamnl
     inst_simple /etc/libnl/classid
     inst_script "$moddir/ifup.sh" "/sbin/ifup"
     inst_script "$moddir/netroot.sh" "/sbin/netroot"
@@ -83,6 +85,7 @@ install() {
     inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
     inst_hook pre-udev 60 "$moddir/net-genrules.sh"
     inst_hook cmdline 91 "$moddir/dhcp-root.sh"
+    inst_hook cmdline 92 "$moddir/parse-ibft.sh"
     inst_hook cmdline 95 "$moddir/parse-vlan.sh"
     inst_hook cmdline 96 "$moddir/parse-bond.sh"
     inst_hook cmdline 96 "$moddir/parse-team.sh"

modules.d/40network/net-genrules.sh

@@ -54,29 +54,42 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh
     ifup='/sbin/ifup $env{INTERFACE}'
     [ -z "$netroot" ] && ifup="$ifup -m"
 
-    runcmd="RUN+=\"/sbin/initqueue --onetime $ifup\""
+    runcmd="RUN+=\"/sbin/initqueue --name ifup-\$env{INTERFACE} --unique --onetime $ifup\""
 
     # We have some specific interfaces to handle
     if [ -n "$IFACES" ]; then
         echo 'SUBSYSTEM!="net", GOTO="net_end"'
-        echo 'ACTION=="remove", GOTO="net_end"'
+        echo 'ACTION!="add|change|move", GOTO="net_end"'
         for iface in $IFACES; do
             case "$iface" in
                 ??:??:??:??:??:??)  # MAC address
-                    cond="ATTR{address}==\"$iface\"" ;;
+                    cond="ATTR{address}==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
                 ??-??-??-??-??-??)  # MAC address in BOOTIF form
-                    cond="ATTR{address}==\"$(fix_bootif $iface)\"" ;;
+                    cond="ATTR{address}==\"$(fix_bootif $iface)\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
                 *)                  # an interface name
-                    cond="ENV{INTERFACE}==\"$iface\"" ;;
+                    cond="ENV{INTERFACE}==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    cond="NAME==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
             esac
             # The GOTO prevents us from trying to ifup the same device twice
-            echo "$cond, $runcmd, GOTO=\"net_end\""
         done
         echo 'LABEL="net_end"'
 
-        for iface in $MASTER_IFACES; do
+        if [ -n "$MASTER_IFACES" ]; then
+            wait_ifaces=$MASTER_IFACES
+        else
+            wait_ifaces=$IFACES
+        fi
+
+        for iface in $wait_ifaces; do
             if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then
-                echo "[ -f /tmp/setup_net_${iface}.ok ]" >$hookdir/initqueue/finished/wait-$iface.sh
+                echo "[ -f /tmp/net.${iface}.did-setup ]" >$hookdir/initqueue/finished/wait-$iface.sh
             fi
         done
     # Default: We don't know the interface to use, handle all

modules.d/40network/net-lib.sh

@@ -28,30 +28,6 @@ iface_for_mac() {
     done
 }
 
-iface_has_link() {
-    local interface="$1" flags=""
-    [ -n "$interface" ] || return 2
-    interface="/sys/class/net/$interface"
-    [ -d "$interface" ] || return 2
-    flags=$(cat $interface/flags)
-    echo $(($flags|0x41)) > $interface/flags # 0x41: IFF_UP|IFF_RUNNING
-    [ "$(cat $interface/carrier)" = 1 ] || return 1
-    # XXX Do we need to reset the flags here? anaconda never bothered..
-}
-
-find_iface_with_link() {
-    local iface_path="" iface=""
-    for iface_path in /sys/class/net/*; do
-        iface=${iface_path##*/}
-        str_starts "$iface" "lo" && continue
-        if iface_has_link $iface; then
-            echo "$iface"
-            return 0
-        fi
-    done
-    return 1
-}
-
 # get the iface name for the given identifier - either a MAC, IP, or iface name
 iface_name() {
     case $1 in
@@ -106,12 +82,16 @@ ifdown() {
     ip addr flush dev $netif
     echo "#empty" > /etc/resolv.conf
     rm -f -- /tmp/net.$netif.did-setup
+    [ -e /sys/class/net/$netif/address ] && \
+        rm -f -- /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
     # TODO: send "offline" uevent?
 }
 
 setup_net() {
     local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES=""
     [ -e /tmp/net.$netif.did-setup ] && return
+    [ -e /sys/class/net/$netif/address ] && \
+        [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && return
     [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
     [ -z "$IFACES" ] && IFACES="$netif"
     # run the scripts written by ifup
@@ -147,12 +127,14 @@ setup_net() {
         read layer2 < /sys/class/net/$netif/device/layer2
     fi
 
-    if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! arping -q -f -w 60 -I $netif $dest ; then
-        info "Resolving $dest via ARP on $netif failed"
+    if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! strstr "$dest" ":"; then
+        arping -q -f -w 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed"
     fi
     unset layer2
 
     > /tmp/net.$netif.did-setup
+    [ -e /sys/class/net/$netif/address ] && \
+        > /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
 }
 
 save_netinfo() {
@@ -172,13 +154,20 @@ save_netinfo() {
 }
 
 set_ifname() {
-    local name="$1" mac="$2" num=0 n=""
+    local name="$1" mac="$2" num=-1 n=""
     # if it's already set, return the existing name
     for n in $(getargs ifname=); do
         strstr "$n" "$mac" && echo ${n%%:*} && return
     done
     # otherwise, pick a new name and use that
-    while [ -e /sys/class/net/$name$num ]; do num=$(($num+1)); done
+    while :; do
+        num=$(($num+1));
+        [ -e /sys/class/net/$name$num ] && continue
+        for n in $(getargs ifname=); do
+            [ "$name$num" = "${n%%:*}" ] && continue 2
+        done
+        break
+    done
     echo "ifname=$name$num:$mac" >> /etc/cmdline.d/45-ifname.conf
     echo "$name$num"
 }
@@ -196,30 +185,36 @@ fix_bootif() {
 }
 
 ibft_to_cmdline() {
-    local iface="" mac="" dev=""
-    local dhcp="" ip="" gw="" mask="" hostname=""
+    local iface=""
     modprobe -q iscsi_ibft
     (
         for iface in /sys/firmware/ibft/ethernet*; do
+            local mac="" dev=""
+            local dhcp="" ip="" gw="" mask="" hostname=""
+            local dns1 dns2
+
             [ -e ${iface}/mac ] || continue
             mac=$(read a < ${iface}/mac; echo $a)
             [ -z "$mac" ] && continue
             dev=$(set_ifname ibft $mac)
+
+            [ -e /tmp/net.${dev}.has_ibft_config ] && continue
+
             [ -e ${iface}/dhcp ] && dhcp=$(read a < ${iface}/dhcp; echo $a)
-            if [ -e ${iface}/vlan ]; then
-               vlan=$(read a < ${iface}/vlan; echo $a)
-                echo "vlan=$vlan:$dev"
-            fi
 
             if [ -n "$dhcp" ]; then
                 echo "ip=$dev:dhcp"
             elif [ -e ${iface}/ip-addr ]; then
                 [ -e ${iface}/ip-addr ] && ip=$(read a < ${iface}/ip-addr; echo $a)
+                # skip not assigned ip adresses
+                [ "$ip" = "0.0.0.0" ] && continue
                 [ -e ${iface}/gateway ] && gw=$(read a < ${iface}/gateway; echo $a)
                 [ -e ${iface}/subnet-mask ] && mask=$(read a < ${iface}/subnet-mask; echo $a)
+                [ -e ${iface}/primary-dns ] && dns1=$(read a < ${iface}/primary-dns; echo $a)
+                [ -e ${iface}/secondary-dns ] && dns2=$(read a < ${iface}/secondary-dns; echo $a)
                 [ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a)
                 if [ -n "$ip" ] && [ -n "$mask" ]; then
-                    echo "ip=$ip::$gw:$mask:$hostname:$dev:none"
+                    echo "ip=$ip::$gw:$mask:$hostname:$dev:none${dns1:+:$dns1}${dns2:+:$dns2}"
                 else
                     warn "${iface} does not contain a valid iBFT configuration"
                     warn "ip-addr=$ip"
@@ -232,11 +227,23 @@ ibft_to_cmdline() {
                 ls -l ${iface} | vinfo
             fi
 
+            if [ -e ${iface}/vlan ]; then
+               vlan=$(read a < ${iface}/vlan; echo $a)
+               if [ "$vlan" -ne "0" ]; then
+                   case "$vlan" in
+                       [0-9]*)
+                           echo "vlan=$dev.$vlan:$dev"
+                           ;;
+                       *)
+                           echo "vlan=$vlan:$dev"
+                           ;;
+                   esac
+               fi
+            fi
+
             echo $mac > /tmp/net.${dev}.has_ibft_config
         done
     ) >> /etc/cmdline.d/40-ibft.conf
-    # reread cmdline
-    unset CMDLINE
 }
 
 parse_iscsi_root()
@@ -341,7 +348,7 @@ ip_to_var() {
         fi
     done
 
-    unset ip srv gw mask hostname dev autoconf macaddr mtu
+    unset ip srv gw mask hostname dev autoconf macaddr mtu dns1 dns2
     case $# in
         0)  autoconf="error" ;;
         1)  autoconf=$1 ;;
@@ -349,11 +356,22 @@ ip_to_var() {
         3)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2; [ -n "$3" ] && mtu=$3 ;;
         4)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2; [ -n "$3" ] && mtu=$3; [ -n "$4" ] && macaddr=$4 ;;
         *)  [ -n "$1" ] && ip=$1; [ -n "$2" ] && srv=$2; [ -n "$3" ] && gw=$3; [ -n "$4" ] && mask=$4;
-            [ -n "$5" ] && hostname=$5; [ -n "$6" ] && dev=$6; [ -n "$7" ] && autoconf=$7; [ -n "$8" ] && mtu=$8;
-            if [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
-                macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
-            fi
-	    ;;
+            [ -n "$5" ] && hostname=$5; [ -n "$6" ] && dev=$6; [ -n "$7" ] && autoconf=$7;
+            case "$8" in
+                [0-9]*:*|[0-9]*.[0-9]*.[0-9]*.[0-9]*)
+                    dns1="$8"
+                    [ -n "$9" ] && dns2="$9"
+                    ;;
+                [0-9]*)
+                    mtu="$8"
+                    ;;
+                *)
+                    if [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
+                        macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
+                    fi
+	            ;;
+            esac
+            ;;
     esac
 
     # ip=<ipv4-address> means anaconda-style static config argument cluster:
@@ -421,7 +439,7 @@ wait_for_if_up() {
     local li
     while [ $cnt -lt 200 ]; do
         li=$(ip -o link show up dev $1)
-        [ -n "$li" ] && return 0
+        [ -n "$li" ] && [ -z "${li##*state UP*}" ] && return 0
         sleep 0.1
         cnt=$(($cnt+1))
     done
@@ -439,12 +457,26 @@ wait_for_route_ok() {
     return 1
 }
 
+wait_for_ipv6_dad() {
+    local cnt=0
+    local li
+    while [ $cnt -lt 500 ]; do
+        li=$(ip -6 addr show dev $1)
+        strstr "$li" "tentative" || return 0
+        sleep 0.1
+        cnt=$(($cnt+1))
+    done
+    return 1
+}
+
 wait_for_ipv6_auto() {
     local cnt=0
     local li
     while [ $cnt -lt 400 ]; do
         li=$(ip -6 addr show dev $1)
-        strstr "$li" "dynamic" && return 0
+        if ! strstr "$li" "tentative"; then
+            strstr "$li" "dynamic" && return 0
+        fi
         sleep 0.1
         cnt=$(($cnt+1))
     done
@@ -461,3 +493,26 @@ type hostname >/dev/null 2>&1 || \
 hostname() {
 	cat /proc/sys/kernel/hostname
 }
+
+iface_has_link() {
+    local interface="$1" flags=""
+    [ -n "$interface" ] || return 2
+    interface="/sys/class/net/$interface"
+    [ -d "$interface" ] || return 2
+    linkup "$1"
+    [ "$(cat $interface/carrier)" = 1 ] || return 1
+    # XXX Do we need to reset the flags here? anaconda never bothered..
+}
+
+find_iface_with_link() {
+    local iface_path="" iface=""
+    for iface_path in /sys/class/net/*; do
+        iface=${iface_path##*/}
+        str_starts "$iface" "lo" && continue
+        if iface_has_link $iface; then
+            echo "$iface"
+            return 0
+        fi
+    done
+    return 1
+}

modules.d/40network/netroot.sh

@@ -51,6 +51,7 @@ if [ -z "$2" ]; then
         netroot=$new_root_path
 
         # FIXME!
+        unset rootok
         for f in $hookdir/cmdline/90*.sh; do
             [ -f "$f" ] && . "$f";
         done

modules.d/40network/parse-ibft.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+command -v getarg >/dev/null          || . /lib/dracut-lib.sh
+command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
+
+# If ibft is requested, read ibft vals and write ip=XXX cmdline args
+[ "ibft" = "$(getarg ip=)" ] && ibft_to_cmdline
+

modules.d/40network/parse-ip-opts.sh

@@ -15,7 +15,6 @@
 #
 
 command -v getarg >/dev/null          || . /lib/dracut-lib.sh
-command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
 
 if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] && [ -z "$(getarg BOOTIF=)" ]; then
     # No ip= argument(s) for netroot provided, defaulting to DHCP
@@ -39,9 +38,6 @@ if [ -n "$NEEDBOOTDEV" ] ; then
     [ -z "$BOOTDEV" ] && warn "Please supply bootdev argument for multiple ip= lines"
 fi
 
-# If ibft is requested, read ibft vals and write ip=XXX cmdline args
-[ "ibft" = "$(getarg ip=)" ] && ibft_to_cmdline
-
 # Check ip= lines
 # XXX Would be nice if we could errorcheck ip addresses here as well
 for p in $(getargs ip=); do
@@ -112,7 +108,7 @@ for p in $(getargs ip=); do
 done
 
 # put BOOTIF in IFACES to make sure it comes up
-if BOOTIF="$(getarg BOOTIF=)"; then
+if getargbool 1 "rd.bootif" && BOOTIF="$(getarg BOOTIF=)"; then
     BOOTDEV=$(fix_bootif $BOOTIF)
     IFACES="$BOOTDEV $IFACES"
 fi

modules.d/45ifcfg/module-setup.sh

@@ -2,14 +2,18 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
+    [[ -d /etc/sysconfig/network-scripts ]] && return 0
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     inst_hook pre-pivot 85 "$moddir/write-ifcfg.sh"
 }

modules.d/45ifcfg/write-ifcfg.sh

@@ -9,6 +9,10 @@ if [ -e /tmp/bridge.info ]; then
     . /tmp/bridge.info
 fi
 
+if [ -e /tmp/vlan.info ]; then
+    . /tmp/vlan.info
+fi
+
 mkdir -m 0755 -p /tmp/ifcfg/
 mkdir -m 0755 -p /tmp/ifcfg-leases/
 
@@ -51,9 +55,9 @@ print_s390() {
 
     SUBCHANNELS=${SUBCHANNELS%,}
     echo "SUBCHANNELS=\"${SUBCHANNELS}\""
-    CONFIG_LINE=$(get_config_line_by_subchannel $SUBCHANNELS)
 
-    [ $? -ne 0 -o -z "$CONFIG_LINE" ] && return
+    CONFIG_LINE=$(get_config_line_by_subchannel $SUBCHANNELS)
+    [ $? -ne 0 -o -z "$CONFIG_LINE" ] && return 0
 
     OLD_IFS=$IFS
     IFS=","
@@ -73,6 +77,7 @@ print_s390() {
     OPTIONS=${OPTIONS## }
     echo "NETTYPE=\"${NETTYPE}\""
     echo "OPTIONS=\"${OPTIONS}\""
+    return 0
 }
 
 for netup in /tmp/net.*.did-setup ; do
@@ -80,6 +85,7 @@ for netup in /tmp/net.*.did-setup ; do
 
     netif=${netup%%.did-setup}
     netif=${netif##*/net.}
+    strstr "$netif" ":*:*:*:*:" && continue
     [ -e /tmp/ifcfg/ifcfg-$netif ] && continue
     unset bridge
     unset bond
@@ -103,7 +109,11 @@ for netup in /tmp/net.*.did-setup ; do
     # $netif can't be bridge and bond at the same time
         bond=yes
     fi
-    cat /sys/class/net/$netif/address > /tmp/net.$netif.hwaddr
+    if [ "$netif" = "$vlanname" ]; then
+        vlan=yes
+    fi
+    [ -e /sys/class/net/$netif/address ] && \
+        cat /sys/class/net/$netif/address > /tmp/net.$netif.hwaddr
     {
         echo "# Generated by dracut initrd"
         echo "DEVICE=\"$netif\""
@@ -149,21 +159,28 @@ for netup in /tmp/net.*.did-setup ; do
     } > /tmp/ifcfg/ifcfg-$netif
 
     # bridge needs different things written to ifcfg
-    if [ -z "$bridge" ] && [ -z "$bond" ]; then
+    if [ -z "$bridge" ] && [ -z "$bond" ] && [ -z "$vlan" ]; then
         # standard interface
         {
-            if [ -n "$macaddr" ]; then
-                echo "MACADDR=\"$macaddr\""
-            else
-                echo "HWADDR=\"$(cat /sys/class/net/$netif/address)\""
+            [ -n "$macaddr" ] && echo "MACADDR=\"$macaddr\""
+            if ! print_s390 $netif; then
+                [ -n "$macaddr" ] || echo "HWADDR=\"$(cat /sys/class/net/$netif/address)\""
             fi
-            print_s390 $netif
             echo "TYPE=Ethernet"
             echo "NAME=\"$netif\""
             [ -n "$mtu" ] && echo "MTU=\"$mtu\""
         } >> /tmp/ifcfg/ifcfg-$netif
     fi
 
+    if [ -n "$vlan" ] ; then
+        {
+            echo "TYPE=Vlan"
+            echo "NAME=\"$netif\""
+            echo "VLAN=yes"
+            echo "PHYSDEV=\"$phydevice\""
+        } >> /tmp/ifcfg/ifcfg-$netif
+    fi
+
     if [ -n "$bond" ] ; then
         # bond interface
         {

modules.d/45url-lib/module-setup.sh

@@ -1,20 +1,23 @@
 #!/bin/bash
 # module-setup for url-lib
 
+# called by dracut
 check() {
-    command -v curl >/dev/null || return 1
+    require_binaries curl || return 1
     return 255
 }
 
+# called by dracut
 depends() {
     echo network
     return 0
 }
 
+# called by dracut
 install() {
     local _dir _crt _found _lib
     inst_simple "$moddir/url-lib.sh" "/lib/url-lib.sh"
-    dracut_install curl
+    inst_multiple curl
     # also install libs for curl https
     inst_libdir_file "libnsspem.so*"
     inst_libdir_file "libnsssysinit.so*"

modules.d/45url-lib/url-lib.sh

@@ -64,7 +64,7 @@ curl_fetch_url() {
     local url="$1" outloc="$2"
     echo "$url" > /proc/self/fd/0
     if [ -n "$outloc" ]; then
-        curl $curl_args --output "$outloc" -- "$url" || return $?
+        curl $curl_args --output - -- "$url" > "$outloc" || return $?
     else
         local outdir="$(mkuniqdir /tmp curl_fetch_url)"
         ( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
@@ -76,7 +76,7 @@ curl_fetch_url() {
     fi
     if [ -z "$2" ]; then echo "$outloc" ; fi
 }
-add_url_handler curl_fetch_url http https ftp
+add_url_handler curl_fetch_url http https ftp tftp
 
 set_http_header() {
     echo "header = \"$1: $2\"" >> $CURL_HOME/.curlrc

modules.d/50drm/module-setup.sh

@@ -2,14 +2,17 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 installkernel() {
     local _modname
     # Include KMS capable drm drivers

modules.d/50gensplash/module-setup.sh

@@ -2,16 +2,19 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     # TODO: splash_geninitramfs
     # TODO: /usr/share/splashutils/initrd.splash
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 install() {
     local _opts
     local _splash_theme
@@ -71,7 +74,7 @@ install() {
     mv dev.old dev
     popd >/dev/null
 
-    dracut_install chvt
+    inst_multiple chvt
     inst /usr/share/splashutils/initrd.splash /lib/gensplash-lib.sh
     inst_hook pre-pivot 90 "${moddir}"/gensplash-newroot.sh
     inst_hook pre-trigger 10 "${moddir}"/gensplash-pretrigger.sh

modules.d/50plymouth/module-setup.sh

@@ -2,15 +2,18 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
-    type -P plymouthd >/dev/null && type -P plymouth >/dev/null
+    require_binaries plymouthd plymouth
 }
 
+# called by dracut
 depends() {
     echo drm
 }
 
+# called by dracut
 install() {
     if grep -q nash /usr/libexec/plymouth/plymouth-populate-initrd \
         || [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
@@ -22,7 +25,7 @@ install() {
 
     inst_hook emergency 50 "$moddir"/plymouth-emergency.sh
 
-    dracut_install readlink
+    inst_multiple readlink
 
     if ! dracut_module_included "systemd"; then
         inst_hook pre-trigger 10 "$moddir"/plymouth-pretrigger.sh

modules.d/50plymouth/plymouth-populate-initrd.sh

@@ -4,7 +4,7 @@
 PLYMOUTH_LOGO_FILE="/usr/share/pixmaps/system-logo-white.png"
 PLYMOUTH_THEME=$(plymouth-set-default-theme)
 
-dracut_install plymouthd plymouth \
+inst_multiple plymouthd plymouth \
     "${PLYMOUTH_LOGO_FILE}" \
     /etc/system-release
 
@@ -13,7 +13,7 @@ mkdir -m 0755 -p "${initdir}/usr/share/plymouth"
 inst_libdir_file "plymouth/text.so" "plymouth/details.so"
 
 if [[ $hostonly ]]; then
-    dracut_install \
+    inst_multiple \
         "/usr/share/plymouth/themes/details/details.plymouth" \
         "/usr/share/plymouth/themes/text/text.plymouth" \
 
@@ -35,7 +35,7 @@ else
         [[ -f "$x" ]] || continue
         THEME_DIR=$(dirname "$x")
         mkdir -m 0755 -p "${initdir}/$THEME_DIR"
-        dracut_install "$x"
+        inst_multiple "$x"
     done
     (
         cd ${initdir}/usr/share/plymouth/themes;

modules.d/80cms/cmsifup.sh

@@ -32,7 +32,6 @@ fi
 	echo "nameserver=$i"
     done
 } > /etc/cmdline.d/80-cms.conf
-unset CMDLINE
 
 [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
 IFACES="$IFACES $DEVICE"

modules.d/80cms/cmssetup.sh

@@ -182,7 +182,19 @@ function dasd_settle_all() {
 
         unset _do_zfcp
         for i in ${!FCP_*}; do
-	    echo "${!i}" >> /etc/zfcp.conf
+	    echo "${!i}" | while read port rest; do
+                case $port in
+                *.*.*)
+                    ;;
+                *.*)
+                    port="0.$port"
+                    ;;
+                *)
+                    port="0.0.$port"
+                    ;;
+                esac
+                echo $port $rest >> /etc/zfcp.conf
+            done
 	    _do_zfcp=1
         done
         [[ $_do_zfcp ]] && zfcp_cio_free

modules.d/80cms/module-setup.sh

@@ -2,12 +2,14 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     arch=$(uname -m)
     [ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
     return 255
 }
 
+# called by dracut
 depends() {
     arch=$(uname -m)
     [ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
@@ -15,15 +17,17 @@ depends() {
     return 0
 }
 
+# called by dracut
 installkernel() {
     instmods zfcp
 }
 
+# called by dracut
 install() {
     inst_hook pre-trigger 30 "$moddir/cmssetup.sh"
     inst_hook pre-pivot 95 "$moddir/cms-write-ifcfg.sh"
     inst_script "$moddir/cmsifup.sh" /sbin/cmsifup
-    dracut_install /etc/cmsfs-fuse/filetypes.conf /etc/udev/rules.d/99-fuse.rules /etc/fuse.conf \
+    inst_multiple /etc/cmsfs-fuse/filetypes.conf /etc/udev/rules.d/99-fuse.rules /etc/fuse.conf \
         cmsfs-fuse fusermount ulockmgr_server bash insmod rmmod cat normalize_dasd_arg sed \
         $(rpm -ql s390utils-base)
 

modules.d/90bcache/module-setup.sh

@@ -1,30 +0,0 @@
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-check() {
-    type -P probe-bcache >/dev/null || return 1
-
-    [[ $hostonly ]] || [[ $mount_needs ]] && {
-        for fs in "${host_fs_types[@]}"; do
-            [[ $fs = "bcache" ]] && return 0
-        done
-        return 255
-    }
-
-    return 0
-}
-
-depends() {
-    return 0
-}
-
-installkernel() {
-    instmods bcache
-}
-
-install() {
-    dracut_install probe-bcache ${udevdir}/bcache-register
-    inst_rules 61-bcache.rules
-}
-

modules.d/90btrfs/module-setup.sh

@@ -2,11 +2,12 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     local _rootdev
     # if we don't have btrfs installed on the host system,
     # no point in trying to support it in the initramfs.
-    type -P btrfs >/dev/null || return 1
+    require_binaries btrfs || return 1
 
     [[ $hostonly ]] || [[ $mount_needs ]] && {
         for fs in ${host_fs_types[@]}; do
@@ -18,15 +19,18 @@ check() {
     return 0
 }
 
+# called by dracut
 depends() {
     echo udev-rules
     return 0
 }
 
+# called by dracut
 installkernel() {
     instmods btrfs
 }
 
+# called by dracut
 install() {
     if ! inst_rules 64-btrfs.rules; then
         inst_rules "$moddir/80-btrfs.rules"
@@ -39,11 +43,10 @@ install() {
     fi
 
     if ! dracut_module_included "systemd"; then
-        inst_script "$moddir/btrfs_timeout.sh" \
-            /usr/lib/dracut/hooks/initqueue/timeout/btrfs_timeout.sh
+        inst_hook initqueue/timeout 10 "$moddir/btrfs_timeout.sh"
     fi
 
-    dracut_install -o btrfsck btrfs-zero-log
+    inst_multiple -o btrfsck btrfs-zero-log
     inst $(command -v btrfs) /sbin/btrfs
 }
 

modules.d/90crypt/crypt-lib.sh

@@ -4,6 +4,19 @@
 
 command -v getarg >/dev/null || . /lib/dracut-lib.sh
 
+# check if the crypttab contains an entry for a LUKS UUID
+crypttab_contains() {
+    local luks="$1"
+    local l d rest
+    if [ -f /etc/crypttab ]; then
+        while read l d rest; do
+            strstr "${l##luks-}" "${luks##luks-}" && return 0
+            strstr "$d" "${luks##luks-}" && return 0
+        done < /etc/crypttab
+    fi
+    return 1
+}
+
 # ask_for_password
 #
 # Wraps around plymouth ask-for-password and adds fallback to tty password ask

modules.d/90crypt/crypt-run-generator.sh

@@ -3,15 +3,12 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
 . /lib/dracut-lib.sh
+type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh
 
 dev=$1
 luks=$2
 
-if [ -f /etc/crypttab ]; then
-    while read l rest; do
-        strstr "${l##luks-}" "${luks##luks-}" && exit 0
-    done < /etc/crypttab
-fi
+crypttab_contains "$luks" && exit 0
 
 allowdiscards="-"
 

modules.d/90crypt/cryptroot-ask.sh

@@ -8,22 +8,7 @@ NEWROOT=${NEWROOT:-"/sysroot"}
 # do not ask, if we already have root
 [ -f $NEWROOT/proc ] && exit 0
 
-# check if destination already exists
-[ -b /dev/mapper/$2 ] && exit 0
-
-# we already asked for this device
-[ -f /tmp/cryptroot-asked-$2 ] && exit 0
-
-# load dm_crypt if it is not already loaded
-[ -d /sys/module/dm_crypt ] || modprobe dm_crypt
-
-. /lib/dracut-crypt-lib.sh
-
-# default luksname - luks-UUID
-luksname=$2
-
-# fallback to passphrase
-ask_passphrase=1
+. /lib/dracut-lib.sh
 
 # if device name is /dev/dm-X, convert to /dev/mapper/name
 if [ "${1##/dev/dm-}" != "$1" ]; then
@@ -32,6 +17,9 @@ else
     device="$1"
 fi
 
+# default luksname - luks-UUID
+luksname=$2
+
 # number of tries
 numtries=${3:-10}
 
@@ -45,7 +33,7 @@ if [ -f /etc/crypttab ] && getargbool 1 rd.luks.crypttab -d -n rd_NO_CRYPTTAB; t
 
         # UUID used in crypttab
         if [ "${dev%%=*}" = "UUID" ]; then
-            if [ "luks-${dev##UUID=}" = "$2" ]; then
+            if [ "luks-${dev##UUID=}" = "$luksname" ]; then
                 luksname="$name"
                 break
             fi
@@ -63,6 +51,18 @@ if [ -f /etc/crypttab ] && getargbool 1 rd.luks.crypttab -d -n rd_NO_CRYPTTAB; t
     unset name dev
 fi
 
+# check if destination already exists
+[ -b /dev/mapper/$luksname ] && exit 0
+
+# we already asked for this device
+asked_file=/tmp/cryptroot-asked-$luksname
+[ -f $asked_file ] && exit 0
+
+# load dm_crypt if it is not already loaded
+[ -d /sys/module/dm_crypt ] || modprobe dm_crypt
+
+. /lib/dracut-crypt-lib.sh
+
 #
 # Open LUKS device
 #
@@ -112,6 +112,9 @@ fi
 
 unset allowdiscards
 
+# fallback to passphrase
+ask_passphrase=1
+
 if [ -n "$luksfile" -a "$luksfile" != "none" -a -e "$luksfile" ]; then
     if cryptsetup --key-file "$luksfile" $cryptsetupopts luksOpen "$device" "$luksname"; then
         ask_passphrase=0
@@ -157,7 +160,7 @@ fi
 unset device luksname luksfile
 
 # mark device as asked
->> /tmp/cryptroot-asked-$2
+>> $asked_file
 
 need_shutdown
 udevsettle

modules.d/90crypt/module-setup.sh

@@ -2,10 +2,11 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     local _rootdev
     # if cryptsetup is not installed, then we cannot support encrypted devices.
-    type -P cryptsetup >/dev/null || return 1
+    require_binaries cryptsetup || return 1
 
     [[ $hostonly ]] || [[ $mount_needs ]] && {
         for fs in "${host_fs_types[@]}"; do
@@ -17,38 +18,45 @@ check() {
     return 0
 }
 
+# called by dracut
 depends() {
     echo dm rootfs-block
     return 0
 }
 
+# called by dracut
 installkernel() {
     instmods dm_crypt =crypto
 }
 
+# called by dracut
+cmdline() {
+    local dev UUID
+    for dev in "${!host_fs_types[@]}"; do
+        [[ "${host_fs_types[$dev]}" != "crypto_LUKS" ]] && continue
+
+        UUID=$(
+            blkid -u crypto -o export $dev \
+                | while read line; do
+                [[ ${line#UUID} = $line ]] && continue
+                printf "%s" "${line#UUID=}"
+                break
+            done
+        )
+        [[ ${UUID} ]] || continue
+        printf "%s" " rd.luks.uuid=luks-${UUID}"
+    done
+}
+
+# called by dracut
 install() {
 
-    check_crypt() {
-        local dev=$1 fs=$2
+    if [[ $hostonly_cmdline == "yes" ]]; then
+        cmdline >> "${initdir}/etc/cmdline.d/90crypt.conf"
+        echo >> "${initdir}/etc/cmdline.d/90crypt.conf"
+    fi
 
-        [[ $fs = "crypto_LUKS" ]] || return 1
-        ID_FS_UUID=$(udevadm info --query=property --name=$dev \
-            | while read line; do
-                [[ ${line#ID_FS_UUID} = $line ]] && continue
-                eval "$line"
-                echo $ID_FS_UUID
-                break
-                done)
-        [[ ${ID_FS_UUID} ]] || return 1
-        if ! [[ $kernel_only ]]; then
-            echo " rd.luks.uuid=luks-${ID_FS_UUID} " >> "${initdir}/etc/cmdline.d/90crypt.conf"
-        fi
-        return 0
-    }
-
-    for_each_host_dev_fs check_crypt
-
-    dracut_install cryptsetup rmdir readlink umount
+    inst_multiple cryptsetup rmdir readlink umount
     inst_script "$moddir"/cryptroot-ask.sh /sbin/cryptroot-ask
     inst_script "$moddir"/probe-keydev.sh /sbin/probe-keydev
     inst_hook cmdline 10 "$moddir/parse-keydev.sh"
@@ -57,7 +65,7 @@ install() {
         inst_hook cleanup 30 "$moddir/crypt-cleanup.sh"
     fi
 
-    if [[ $hostonly ]] && [[ -f /etc/cryptab ]]; then
+    if [[ $hostonly ]] && [[ -f /etc/crypttab ]]; then
         # filter /etc/crypttab for the devices we need
         while read _mapper _dev _rest; do
             [[ $_mapper = \#* ]] && continue
@@ -78,8 +86,7 @@ install() {
 
     inst_simple "$moddir/crypt-lib.sh" "/lib/dracut-crypt-lib.sh"
 
-    dracut_install -o \
-        $systemdutildir/system-generators/systemd-cryptsetup-generator \
+    inst_multiple -o \
         $systemdutildir/system-generators/systemd-cryptsetup-generator \
         $systemdutildir/systemd-cryptsetup \
         $systemdsystemunitdir/systemd-ask-password-console.path \

modules.d/90crypt/parse-crypt.sh

@@ -2,6 +2,8 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh
+
 if ! getargbool 1 rd.luks -d -n rd_NO_LUKS; then
     info "rd.luks=0: removing cryptoluks activation"
     rm -f -- /etc/udev/rules.d/70-luks.rules
@@ -28,13 +30,15 @@ else
                     printf -- '$env{DEVNAME} luks-$env{ID_FS_UUID} %s"\n' $tout
                 } >> /etc/udev/rules.d/70-luks.rules.new
             else
-                {
-                    printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", '
-                    printf -- 'ENV{ID_FS_UUID}=="*%s*", ' $luksid
-                    printf -- 'RUN+="%s --settled --unique --onetime ' $(command -v initqueue)
-                    printf -- '--name systemd-cryptsetup-%%k %s start ' $(command -v systemctl)
-                    printf -- 'systemd-cryptsetup@luks$$(dev_unit_name -$env{ID_FS_UUID}).service"\n'
-                } >> /etc/udev/rules.d/70-luks.rules.new
+                if ! crypttab_contains "$luksid"; then
+                    {
+                        printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", '
+                        printf -- 'ENV{ID_FS_UUID}=="*%s*", ' $luksid
+                        printf -- 'RUN+="%s --settled --unique --onetime ' $(command -v initqueue)
+                        printf -- '--name systemd-cryptsetup-%%k %s start ' $(command -v systemctl)
+                        printf -- 'systemd-cryptsetup@luks$$(dev_unit_name -$env{ID_FS_UUID}).service"\n'
+                    } >> /etc/udev/rules.d/70-luks.rules.new
+                fi
             fi
 
             uuid=$luksid

modules.d/90dm/module-setup.sh

@@ -2,26 +2,30 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
-    type -P dmsetup >/dev/null || return 1
+    require_binaries dmsetup || return 1
     return 255
 }
 
+# called by dracut
 depends() {
     return 0
 }
 
+# called by dracut
 installkernel() {
     instmods =drivers/md
     instmods dm_mod
 }
 
+# called by dracut
 install() {
     modinfo -k $kernel dm_mod >/dev/null 2>&1 && \
         inst_hook pre-udev 30 "$moddir/dm-pre-udev.sh"
 
-    dracut_install dmsetup
-    dracut_install -o dmeventd
+    inst_multiple dmsetup
+    inst_multiple -o dmeventd
 
     inst_libdir_file "libdevmapper-event.so*"
 

modules.d/90dmraid/dmraid.sh

@@ -27,7 +27,8 @@ if [ -n "$DM_RAIDS" ] || getargbool 0 rd.auto; then
             for s in $SETS; do
                 if [ "${s##$r}" != "$s" ]; then
                     info "Activating $s"
-                    dmraid -ay -i --rm_partitions "$s" 2>&1 | vinfo
+                    dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
+                    [ -e "/dev/mapper/$s" ] && kpartx -a "/dev/mapper/$s" 2>&1 | vinfo
                     udevsettle
                 fi
             done
@@ -36,7 +37,8 @@ if [ -n "$DM_RAIDS" ] || getargbool 0 rd.auto; then
     # scan and activate all DM RAIDS
         for s in $SETS; do
             info "Activating $s"
-            dmraid -ay -i --rm_partitions "$s" 2>&1 | vinfo
+            dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
+            [ -e "/dev/mapper/$s" ] && kpartx -a "/dev/mapper/$s" 2>&1 | vinfo
         done
     fi
 

modules.d/90dmraid/module-setup.sh

@@ -2,15 +2,25 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     local _rootdev
     # if we don't have dmraid installed on the host system, no point
     # in trying to support it in the initramfs.
-    type -P dmraid >/dev/null || return 1
+    require_binaries dmraid || return 1
 
     [[ $hostonly ]] || [[ $mount_needs ]] && {
-        for fs in "${host_fs_types[@]}"; do
-            [[ $fs = *_raid_member ]] && return 0
+        for dev in "${!host_fs_types[@]}"; do
+            [[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
+
+            DEVPATH=$(get_devpath_block "$dev")
+
+            for holder in "$DEVPATH"/holders/*; do
+                [[ -e "$holder" ]] || continue
+                [[ -e "$holder/dm" ]] && return 0
+                break
+            done
+
         done
         return 255
     }
@@ -18,47 +28,50 @@ check() {
     return 0
 }
 
+# called by dracut
 depends() {
     echo dm rootfs-block
     return 0
 }
 
+# called by dracut
+cmdline() {
+    local _activated
+    declare -A _activated
+
+    for dev in "${!host_fs_types[@]}"; do
+        local holder DEVPATH DM_NAME majmin
+        [[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
+
+        DEVPATH=$(get_devpath_block "$dev")
+
+        for holder in "$DEVPATH"/holders/*; do
+            [[ -e "$holder" ]] || continue
+            dev="/dev/${holder##*/}"
+            DM_NAME="$(dmsetup info -c --noheadings -o name "$dev" 2>/dev/null)"
+            [[ ${DM_NAME} ]] && break
+        done
+
+        [[ ${DM_NAME} ]] || continue
+
+        if ! [[ ${_activated[${DM_NAME}]} ]]; then
+            printf "%s" " rd.dm.uuid=${DM_NAME}"
+            _activated["${DM_NAME}"]=1
+        fi
+    done
+}
+
+# called by dracut
 install() {
     local _i
 
-    check_dmraid() {
-        local dev=$1 fs=$2 holder DEVPATH DM_NAME
-        [[ "$fs" != *_raid_member ]] && return 1
+    if [[ $hostonly_cmdline == "yes" ]]; then
+        cmdline >> "${initdir}/etc/cmdline.d/90dmraid.conf"
+        echo >> "${initdir}/etc/cmdline.d/90dmraid.conf"
+    fi
 
-        DEVPATH=$(udevadm info --query=property --name=$dev \
-            | while read line; do
-                [[ ${line#DEVPATH} = $line ]] && continue
-                eval "$line"
-                echo $DEVPATH
-                break
-                done)
-        for holder in /sys/$DEVPATH/holders/*; do
-            [[ -e $holder ]] || continue
-            DM_NAME=$(udevadm info --query=property --path=$holder \
-                | while read line; do
-                    [[ ${line#DM_NAME} = $line ]] && continue
-                    eval "$line"
-                    echo $DM_NAME
-                    break
-                    done)
-        done
-
-        [[ ${DM_NAME} ]] || return 1
-        if ! [[ $kernel_only ]]; then
-            echo " rd.dm.uuid=${DM_NAME} " >> "${initdir}/etc/cmdline.d/90dmraid.conf"
-        fi
-        return 0
-    }
-
-    for_each_host_dev_fs check_dmraid
-
-    dracut_install dmraid
-    dracut_install -o kpartx
+    inst_multiple dmraid
+    inst_multiple -o kpartx
     inst $(command -v partx) /sbin/partx
 
     inst "$moddir/dmraid.sh" /sbin/dmraid_scan

modules.d/90dmraid/parse-dm.sh

@@ -7,12 +7,16 @@ if ! getargbool 1 rd.dm -d -n rd_NO_DM || getarg "rd.dm=0" -d nodmraid; then
     udevproperty rd_NO_DM=1
 fi
 
-if  ! command -v mdadm >/dev/null || ! getargbool 1 rd.md.imsm -d -n rd_NO_MDIMSM -n noiswmd; then
+if  ! command -v mdadm >/dev/null \
+    || ! getargbool 1 rd.md.imsm -d -n rd_NO_MDIMSM -n noiswmd \
+    || ! getargbool 1 rd.md -d -n rd_NO_MD; then
     info "rd.md.imsm=0: no MD RAID for imsm/isw raids"
     udevproperty rd_NO_MDIMSM=1
 fi
 
-if  ! command -v mdadm >/dev/null || ! getargbool 1 rd.md.ddf -n rd_NO_MDDDF -n noddfmd; then
+if  ! command -v mdadm >/dev/null \
+    || ! getargbool 1 rd.md.ddf -n rd_NO_MDDDF -n noddfmd \
+    || ! getargbool 1 rd.md -d -n rd_NO_MD; then
     info "rd.md.ddf=0: no MD RAID for SNIA ddf raids"
     udevproperty rd_NO_MDDDF=1
 fi

modules.d/90dmsquash-live/dmsquash-live-genrules.sh

@@ -9,7 +9,7 @@ case "$root" in
         printf 'SYMLINK=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root $env{DEVNAME}"\n' \
             ${root#live:/dev/}
     } >> /etc/udev/rules.d/99-live-squash.rules
-    wait_for_dev "${root#live:}"
+    wait_for_dev -n "${root#live:}"
   ;;
   live:*)
     if [ -f "${root#live:}" ]; then

modules.d/90dmsquash-live/dmsquash-live-root.sh

@@ -57,7 +57,7 @@ det_img_fs() {
 }
 
 modprobe squashfs
-
+CMDLINE=$(getcmdline)
 for arg in $CMDLINE; do case $arg in ro|rw) liverw=$arg ;; esac; done
 # mount the backing of the live image first
 mkdir -m 0755 -p /run/initramfs/live
@@ -144,6 +144,9 @@ do_live_overlay() {
         over=$OVERLAY_LOOPDEV
     fi
     echo 0 $sz snapshot $base $over p 8 | dmsetup create live-rw
+
+    # Create a device that always points to a ro base image
+    echo 0 $sz linear $base 0 | dmsetup create --readonly live-base
 }
 
 # live cd helper function
@@ -225,9 +228,6 @@ if [ -n "$ROOTFLAGS" ]; then
     ROOTFLAGS="-o $ROOTFLAGS"
 fi
 
-if [ -b "$BASE_LOOPDEV" ]; then
-    ln -s $BASE_LOOPDEV /run/initramfs/live-baseloop
-fi
 ln -s /dev/mapper/live-rw /dev/root
 printf 'mount %s /dev/mapper/live-rw %s\n' "$ROOTFLAGS" "$NEWROOT" > $hookdir/mount/01-$$-live.sh
 

modules.d/90dmsquash-live/dmsquash-liveiso-genrules.sh

@@ -3,7 +3,7 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 if [ "${root%%:*}" = "liveiso" ]; then
     {
-        printf 'KERNEL=="loop0", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root `/sbin/losetup -f --show %s`"\n' \
+        printf 'KERNEL=="loop-control", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root `/sbin/losetup -f --show %s`"\n' \
             ${root#liveiso:}
     } >> /etc/udev/rules.d/99-liveiso-mount.rules
 fi

modules.d/90dmsquash-live/iso-scan.sh

@@ -10,7 +10,7 @@ isofile=$1
 
 [ -z "$isofile" ] && exit 1
 
-ismounted "/run/initramfs/isoscan" && exit 1
+ismounted "/run/initramfs/isoscan" && exit 0
 
 mkdir -p "/run/initramfs/isoscan"
 

modules.d/90dmsquash-live/module-setup.sh

@@ -2,12 +2,14 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     # a live host-only image doesn't really make a lot of sense
     [[ $hostonly ]] && return 1
     return 255
 }
 
+# called by dracut
 depends() {
     # if dmsetup is not installed, then we cannot support fedora/red hat
     # style live images
@@ -15,13 +17,15 @@ depends() {
     return 0
 }
 
+# called by dracut
 installkernel() {
     instmods squashfs loop iso9660
 }
 
+# called by dracut
 install() {
-    dracut_install umount dmsetup blkid dd losetup grep blockdev
-    dracut_install -o checkisomd5
+    inst_multiple umount dmsetup blkid dd losetup grep blockdev
+    inst_multiple -o checkisomd5
     inst_hook cmdline 30 "$moddir/parse-dmsquash-live.sh"
     inst_hook cmdline 31 "$moddir/parse-iso-scan.sh"
     inst_hook pre-udev 30 "$moddir/dmsquash-live-genrules.sh"

modules.d/90dmsquash-live/parse-dmsquash-live.sh

@@ -56,4 +56,4 @@ info "root was $liveroot, is now $root"
 # make sure that init doesn't complain
 [ -z "$root" ] && root="live"
 
-wait_for_dev /dev/mapper/live-rw
+wait_for_dev -n /dev/mapper/live-rw

modules.d/90dmsquash-live/parse-iso-scan.sh

@@ -7,8 +7,5 @@
 isofile=$(getarg iso-scan/filename)
 
 if [ -n "$isofile" ]; then
-    {
-        printf 'KERNEL=="loop0", RUN+="/sbin/initqueue --settled --unique /sbin/iso-scan %s"\n' \
-            "'${isofile}'"
-    } >> /etc/udev/rules.d/99-isofile-mount.rules
+    /sbin/initqueue --settled --unique /sbin/iso-scan "$isofile"
 fi

modules.d/90kernel-modules/module-setup.sh

@@ -2,10 +2,11 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 installkernel() {
     if [[ -z $drivers ]]; then
         block_module_filter() {
-            local _blockfuncs='ahci_init_controller|ata_scsi_ioctl|scsi_add_host|blk_init_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device|usb_stor_disconnect'
+            local _blockfuncs='ahci_init_controller|ata_scsi_ioctl|scsi_add_host|blk_cleanup_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device|usb_stor_disconnect'
             # subfunctions inherit following FDs
             local _merge=8 _side2=9
             function bmf1() {
@@ -35,20 +36,24 @@ installkernel() {
             return 0
         }
 
-        hostonly='' instmods sr_mod sd_mod scsi_dh ata_piix \
-            ehci-hcd ehci-pci ehci-platform ohci-hcd uhci-hcd xhci-hcd hid_generic \
-            unix
+        hostonly='' instmods \
+            sr_mod sd_mod scsi_dh ata_piix hid_generic unix \
+            ehci-hcd ehci-pci ehci-platform \
+            ohci-hcd ohci-pci \
+            uhci-hcd \
+            xhci-hcd
 
         instmods yenta_socket scsi_dh_rdac scsi_dh_emc \
             atkbd i8042 usbhid hid-apple hid-sunplus hid-cherry hid-logitech \
             hid-logitech-dj hid-microsoft firewire-ohci \
-            pcmcia usb_storage nvme hid-hyperv hv-vmbus
+            pcmcia usb_storage nvme hid-hyperv hv-vmbus \
+            sdhci_acpi
 
         if [[ "$(uname -p)" == arm* ]]; then
             # arm specific modules
             hostonly='' instmods sdhci_esdhc_imx mmci sdhci_tegra mvsdio omap omapdrm \
                 omap_hsmmc panel-tfp410 sdhci_dove ahci_platform pata_imx sata_mv \
-                ehci-tegra
+                ehci-tegra mmc_block usb_storage
         fi
 
         # install virtual machine support
@@ -73,9 +78,10 @@ installkernel() {
     :
 }
 
+# called by dracut
 install() {
-    dracut_install -o /lib/modprobe.d/*.conf
-    [[ $hostonly ]] && dracut_install -o /etc/modprobe.d/*.conf /etc/modprobe.conf
+    inst_multiple -o /lib/modprobe.d/*.conf
+    [[ $hostonly ]] && inst_multiple -o /etc/modprobe.d/*.conf /etc/modprobe.conf
     if ! dracut_module_included "systemd"; then
         inst_hook cmdline 01 "$moddir/parse-kernel.sh"
     fi

modules.d/90livenet/module-setup.sh

@@ -1,15 +1,18 @@
 #!/bin/bash
 # module-setup.sh for livenet
 
+# called by dracut
 check() {
     return 255
 }
 
+# called by dracut
 depends() {
     echo network url-lib dmsquash-live img-lib
     return 0
 }
 
+# called by dracut
 install() {
     inst_hook cmdline 29 "$moddir/parse-livenet.sh"
     inst_hook initqueue/online 95 "$moddir/fetch-liveupdate.sh"

modules.d/90livenet/parse-livenet.sh

@@ -11,7 +11,6 @@ if [ -n "$updates" ]; then
     # make sure network comes up even if we're doing a local live device
     if [ -z "$netroot" ]; then
 	echo > /tmp/net.ifaces
-	unset CMDLINE
     fi
     echo "$updates" > /tmp/liveupdates.info
     echo '[ -e /tmp/liveupdates.done ]' > \
@@ -28,7 +27,7 @@ if get_url_handler "$liveurl" >/dev/null; then
     netroot="livenet:$liveurl"
     root="livenet" # quiet complaints from init
     rootok=1
-    wait_for_dev /dev/root
+    wait_for_dev -n /dev/root
 else
     info "livenet: no url handler for $liveurl"
 fi

modules.d/90lvm/lvm_scan.sh

@@ -107,11 +107,13 @@ fi
 if [ -n "$LVS" ] ; then
     info "Scanning devices $lvmdevs for LVM logical volumes $LVS"
     lvm lvscan --ignorelockingfailure 2>&1 | vinfo
-    if [ -z "$sysinit" ]; then
-        lvm lvchange -ay --ignorelockingfailure $nopoll --ignoremonitoring $LVS 2>&1 | vinfo
-    else
-        lvm lvchange -ay $sysinit $LVS 2>&1 | vinfo
-    fi
+    for LV in $LVS; do
+        if [ -z "$sysinit" ]; then
+            lvm lvchange --yes -ay --ignorelockingfailure $nopoll --ignoremonitoring $LV 2>&1 | vinfo
+        else
+            lvm lvchange --yes -ay $sysinit $LV 2>&1 | vinfo
+        fi
+    done
 fi
 
 if [ -z "$LVS" -o -n "$VGS" ]; then

modules.d/90lvm/module-setup.sh

@@ -2,9 +2,10 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     # No point trying to support lvm if the binaries are missing
-    type -P lvm >/dev/null || return 1
+    require_binaries lvm || return 1
 
     [[ $hostonly ]] || [[ $mount_needs ]] && {
         for fs in "${host_fs_types[@]}"; do
@@ -16,38 +17,43 @@ check() {
     return 0
 }
 
+# called by dracut
 depends() {
     # We depend on dm_mod being loaded
     echo rootfs-block dm
     return 0
 }
 
+# called by dracut
+cmdline() {
+    local _activated
+    declare -A _activated
+
+    for dev in "${!host_fs_types[@]}"; do
+        [ -e /sys/block/${dev#/dev/}/dm/name ] || continue
+        [ -e /sys/block/${dev#/dev/}/dm/uuid ] || continue
+        uuid=$(</sys/block/${dev#/dev/}/dm/uuid)
+        [[ "${uuid#LVM-}" == "$uuid" ]] && continue
+        dev=$(</sys/block/${dev#/dev/}/dm/name)
+        eval $(dmsetup splitname --nameprefixes --noheadings --rows "$dev" 2>/dev/null)
+        [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 1
+        if ! [[ ${_activated[${DM_VG_NAME}/${DM_LV_NAME}]} ]]; then
+            printf " rd.lvm.lv=%s\n" "${DM_VG_NAME}/${DM_LV_NAME} "
+            _activated["${DM_VG_NAME}/${DM_LV_NAME}"]=1
+        fi
+    done
+}
+
+# called by dracut
 install() {
     local _i
-    local _needthin
-    local _activated
+
     inst lvm
 
-    check_lvm() {
-        local DM_VG_NAME DM_LV_NAME DM_UDEV_DISABLE_DISK_RULES_FLAG
-
-        eval $(udevadm info --query=property --name=$1 | egrep '(DM_VG_NAME|DM_LV_NAME|DM_UDEV_DISABLE_DISK_RULES_FLAG)=')
-        [[ "$DM_UDEV_DISABLE_DISK_RULES_FLAG" = "1" ]] && return 1
-        [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 1
-        if ! [[ " ${_activated[*]} " == *\ ${DM_VG_NAME}/${DM_LV_NAME}\ * ]]; then
-            if ! [[ $kernel_only ]]; then
-                echo " rd.lvm.lv=${DM_VG_NAME}/${DM_LV_NAME} " >> "${initdir}/etc/cmdline.d/90lvm.conf"
-            fi
-            push _activated "${DM_VG_NAME}/${DM_LV_NAME}"
-        fi
-        if ! [[ $_needthin ]]; then
-            [[ $(lvs --noheadings -o segtype ${DM_VG_NAME} 2>/dev/null) == *thin* ]] && _needthin=1
-        fi
-
-        return 0
-    }
-
-    for_each_host_dev_fs check_lvm
+    if [[ $hostonly_cmdline == "yes" ]]; then
+        cmdline >> "${initdir}/etc/cmdline.d/90lvm.conf"
+        echo >> "${initdir}/etc/cmdline.d/90lvm.conf"
+    fi
 
     inst_rules "$moddir/64-lvm.rules"
 
@@ -61,7 +67,27 @@ install() {
         fi
     fi
 
-    inst_rules 11-dm-lvm.rules
+    if ! [[ -e ${initdir}/etc/lvm/lvm.conf ]]; then
+        mkdir -p "${initdir}/etc/lvm"
+        {
+            echo 'global {'
+            echo 'locking_type = 4'
+            echo 'use_lvmetad = 0'
+            echo '}'
+        } > "${initdir}/etc/lvm/lvm.conf"
+    fi
+
+    inst_rules 11-dm-lvm.rules 69-dm-lvm-metad.rules
+
+    # Do not run lvmetad update via pvscan in udev rule  - lvmetad is not running yet in dracut!
+    if grep -q SYSTEMD_WANTS ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules; then
+        sed -i -e 's/^ENV{SYSTEMD_ALIAS}=.*/# No LVM pvscan in dracut - lvmetad is not running yet/' ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
+        sed -i -e 's/^ENV{ID_MODEL}=.*//' ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
+        sed -i -e 's/^ENV{SYSTEMD_WANTS}=.*//' ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
+    else
+        sed -i -e 's/.*lvm pvscan.*/# No LVM pvscan for in dracut - lvmetad is not running yet/' ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
+    fi
+
     # Gentoo ebuild for LVM2 prior to 2.02.63-r1 doesn't install above rules
     # files, but provides the one below:
     inst_rules 64-device-mapper.rules
@@ -73,9 +99,18 @@ install() {
 
     inst_libdir_file "libdevmapper-event-lvm*.so"
 
-    if [[ $_needthin ]]; then
-        dracut_install -o thin_dump thin_restore thin_check
+    if [[ $hostonly ]] && type -P lvs &>/dev/null; then
+        for dev in "${!host_fs_types[@]}"; do
+            [ -e /sys/block/${dev#/dev/}/dm/name ] || continue
+            dev=$(</sys/block/${dev#/dev/}/dm/name)
+            eval $(dmsetup splitname --nameprefixes --noheadings --rows "$dev" 2>/dev/null)
+            [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || continue
+            if [[ "$(lvs --noheadings -o segtype ${DM_VG_NAME} 2>/dev/null)" == *thin* ]] ; then
+                inst_multiple -o thin_dump thin_restore thin_check thin_repair
+                break
+            fi
+        done
+    else
+        inst_multiple -o thin_dump thin_restore thin_check thin_repair
     fi
-
 }
-

modules.d/90lvm/parse-lvm.sh

@@ -13,7 +13,7 @@ if ! getargbool 1 rd.lvm -d -n rd_NO_LVM \
     rm -f -- /etc/udev/rules.d/64-lvm*.rules
 else
     for dev in $LV_DEVS; do
-        wait_for_dev "/dev/$dev"
+        wait_for_dev -n "/dev/$dev"
     done
 fi
 

modules.d/90mdraid/59-persistent-storage-md.rules

@@ -20,4 +20,5 @@ IMPORT{program}="/sbin/mdadm --detail --export $tempnode"
 IMPORT BLKID
 OPTIONS+="link_priority=100"
 OPTIONS+="watch"
+OPTIONS+="db_persist"
 LABEL="md_end"

modules.d/90mdraid/module-setup.sh

@@ -2,14 +2,24 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     local _rootdev
     # No mdadm?  No mdraid support.
-    type -P mdadm >/dev/null || return 1
+    require_binaries mdadm || return 1
 
     [[ $hostonly ]] || [[ $mount_needs ]] && {
-        for fs in "${host_fs_types[@]}"; do
-            [[ "$fs" == *_raid_member ]] && return 0
+        for dev in "${!host_fs_types[@]}"; do
+            [[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
+
+            DEVPATH=$(get_devpath_block "$dev")
+
+            for holder in "$DEVPATH"/holders/*; do
+                [[ -e "$holder" ]] || continue
+                [[ -e "$holder/md" ]] && return 0
+                break
+            done
+
         done
         return 255
     }
@@ -17,48 +27,68 @@ check() {
     return 0
 }
 
+# called by dracut
 depends() {
     echo rootfs-block
     return 0
 }
 
+# called by dracut
 installkernel() {
     instmods =drivers/md
 }
 
+# called by dracut
+cmdline() {
+    local _activated dev line UUID
+    declare -A _activated
+
+    for dev in "${!host_fs_types[@]}"; do
+        [[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
+
+        UUID=$(
+            /sbin/mdadm --examine --export $dev \
+                | while read line; do
+                [[ ${line#MD_UUID=} = $line ]] && continue
+                printf "%s" "${line#MD_UUID=} "
+            done
+        )
+
+        if ! [[ ${_activated[${UUID}]} ]]; then
+            printf "%s" " rd.md.uuid=${UUID}"
+            _activated["${UUID}"]=1
+        fi
+
+    done
+}
+
+# called by dracut
 install() {
-    dracut_install cat
-    dracut_install -o mdmon
+    local rule rule_path
+    inst_multiple cat
+    inst_multiple -o mdmon
     inst $(command -v partx) /sbin/partx
     inst $(command -v mdadm) /sbin/mdadm
 
-    check_mdraid() {
-        local dev=$1 fs=$2 holder DEVPATH MD_UUID
-        [[ "$fs" != *_raid_member ]] && return 1
-
-        MD_UUID=$(/sbin/mdadm --examine --export $dev \
-            | while read line; do
-                [[ ${line#MD_UUID} = $line ]] && continue
-                eval "$line"
-                echo $MD_UUID
-                break
-                done)
-
-        [[ ${MD_UUID} ]] || return 1
-        if ! [[ $kernel_only ]]; then
-            echo " rd.md.uuid=${MD_UUID} " >> "${initdir}/etc/cmdline.d/90mdraid.conf"
-        fi
-        return 0
-    }
-
-    for_each_host_dev_fs check_mdraid
+    if [[ $hostonly_cmdline == "yes" ]]; then
+        cmdline  >> "${initdir}/etc/cmdline.d/90mdraid.conf"
+        echo  >> "${initdir}/etc/cmdline.d/90mdraid.conf"
+    fi
 
+    # <mdadm-3.3 udev rule
     inst_rules 64-md-raid.rules
+    # >=mdadm-3.3 udev rules
+    inst_rules 63-md-raid-arrays.rules 64-md-raid-assembly.rules
     # remove incremental assembly from stock rules, so they don't shadow
     # 65-md-inc*.rules and its fine-grained controls, or cause other problems
     # when we explicitly don't want certain components to be incrementally
     # assembled
-    sed -i -r -e '/RUN\+?="[[:alpha:]/]*mdadm[[:blank:]]+(--incremental|-I)[[:blank:]]+(\$env\{DEVNAME\}|\$tempnode)"/d' "${initdir}${udevdir}/rules.d/64-md-raid.rules"
+    for rule in 64-md-raid.rules 64-md-raid-assembly.rules; do
+        rule_path="${initdir}${udevdir}/rules.d/${rule}"
+        [ -f "${rule_path}" ] && sed -i -r \
+            -e '/RUN\+?="[[:alpha:]/]*mdadm[[:blank:]]+(--incremental|-I)[[:blank:]]+(\$env\{DEVNAME\}|\$tempnode|\$devnode)/d' \
+            "${rule_path}"
+    done
 
     inst_rules "$moddir/65-md-incremental-imsm.rules"
 
@@ -79,6 +109,14 @@ install() {
         else
             [ -f /etc/mdadm/mdadm.conf ] && inst /etc/mdadm/mdadm.conf /etc/mdadm.conf
         fi
+        if [ -d /etc/mdadm.conf.d ]; then
+            local f
+            inst_dir /etc/mdadm.conf.d
+            for f in /etc/mdadm.conf.d/*.conf; do
+                [ -f "$f" ] || continue
+                inst "$f"
+            done
+        fi
     fi
 
     inst_hook pre-udev 30 "$moddir/mdmon-pre-udev.sh"

modules.d/90multipath/module-setup.sh

@@ -2,10 +2,11 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     local _rootdev
     # if there's no multipath binary, no go.
-    type -P multipath >/dev/null || return 1
+    require_binaries multipath || return 1
 
     is_mpath() {
         local _dev=$1
@@ -21,12 +22,14 @@ check() {
     return 0
 }
 
+# called by dracut
 depends() {
     echo rootfs-block
     echo dm
     return 0
 }
 
+# called by dracut
 installkernel() {
     local _ret
     local _arch=$(uname -m)
@@ -67,9 +70,10 @@ installkernel() {
       find_kernel_modules_by_path drivers/md )  |  mp_mod_filter  |  instmods
 }
 
+# called by dracut
 install() {
     local _f
-    dracut_install -o  \
+    inst_multiple -o  \
         dmsetup \
         kpartx \
         mpath_wait \
@@ -87,7 +91,7 @@ install() {
     inst_libdir_file "libmultipath*" "multipath/*"
 
     if dracut_module_included "systemd"; then
-        dracut_install \
+        inst_multiple \
             $systemdsystemunitdir/multipathd.service
         mkdir -p "${initdir}${systemdsystemconfdir}/sysinit.target.wants"
         ln -rfs "${initdir}${systemdsystemunitdir}/multipathd.service" "${initdir}${systemdsystemconfdir}/sysinit.target.wants/multipathd.service"
@@ -95,6 +99,9 @@ install() {
         inst_hook pre-trigger 02 "$moddir/multipathd.sh"
         inst_hook cleanup   02 "$moddir/multipathd-stop.sh"
     fi
+
+    inst_hook cleanup   80 "$moddir/multipathd-needshutdown.sh"
+
     inst_rules 40-multipath.rules 62-multipath.rules 65-multipath.rules 66-kpartx.rules
 }
 

modules.d/90multipath/multipathd-needshutdown.sh

@@ -0,0 +1,9 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+for i in /dev/mapper/mpath*; do
+    [ -b "$i" ] || continue
+    need_shutdown
+    break
+done

modules.d/90qemu-net/module-setup.sh

@@ -2,6 +2,7 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     if type -P systemd-detect-virt >/dev/null 2>&1; then
         vm=$(systemd-detect-virt --vm >/dev/null 2>&1)
@@ -21,6 +22,7 @@ check() {
     return 255
 }
 
+# called by dracut
 installkernel() {
     # qemu specific modules
     hostonly='' instmods virtio_net e1000 8139cp pcnet32 e100 ne2k_pci

modules.d/90qemu/module-setup.sh

@@ -2,6 +2,7 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
+# called by dracut
 check() {
     if type -P systemd-detect-virt >/dev/null 2>&1; then
         vm=$(systemd-detect-virt --vm >/dev/null 2>&1)
@@ -20,6 +21,7 @@ check() {
     return 255
 }
 
+# called by dracut
 installkernel() {
         # qemu specific modules
         hostonly='' instmods virtio_blk virtio virtio_ring virtio_pci ata_piix ata_generic pata_acpi cdrom sr_mod ahci virtio_scsi