NEWS & AUTHORS update

test/*NFS* : add dhcpd debug flag
TEST-30-ISCSI: turn off iscsi_firmware
2015-01-31 12:54:52 +01:00 · 2015-01-31 12:24:02 +01:00 · 2015-01-31 12:22:45 +01:00 · 2015-01-31 12:21:56 +01:00 · 2015-01-28 13:33:09 +00:00 · 2015-01-26 15:12:08 +00:00
345 changed files with 9184 additions and 3427 deletions
--- a/.dir-locals.el
+++ b/.dir-locals.el
@@ -0,0 +1,2 @@
+(setq sh-basic-offset: 4)
+(setq indent-tabs-mode nil)
--- a/.kateconfig
+++ b/.kateconfig
@@ -0,0 +1 @@
+kate: space-indent on; tab-width 4; indent-width 4; replace-tabs on; eol unix;
--- a/.kateproject
+++ b/.kateproject
@@ -0,0 +1,9 @@
+{
+  "name": "Kate"
+  , "files": [ { "git": 1 } ]
+  , "build": {
+    "directory": "build"
+  , "build": "make -j $(getconf _NPROCESSORS_ONLN) all"
+  , "clean": "make clean"
+  }
+}
--- a/.mailmap
+++ b/.mailmap
@@ -10,6 +10,9 @@ Andrey Borzenkov <arvidjaar@gmail.com> 		<arvidjaar@mail.ru>
 Dan Horák <dhorak@redhat.com> 			<dan@danny.cz>
 John Reiser <jreiser@bitwagon.com> 		<jreiser@BitWagon.com>
 Luca Berra <bluca@vodka.it> 			<bluca@comedia.it>
-Dave Young <dyoung@redhat.com>	 		dyoung@redhat.com
+Dave Young <dyoung@redhat.com>	 		<dyoung@redhat.com>
+Dave Young <dyoung@redhat.com>	 		<dave@redhat.com>
 Frederick Grose <fgrose@sugarlabs.org> 		<fgrose@gmail.com>
 Frederic Crozat <fcrozat@suse.com> 		<fcrozat@mandriva.com>
+Shawn W Dunn <sfalken@opensuse.org> 		<sfalken@opensuse.org>
+Kyle McMartin <kmcmarti@redhat.com>             <kyle@redhat.com>
--- a/50-dracut.install
+++ b/50-dracut.install
@@ -1,32 +1,44 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

-if [[ -f /etc/kernel/cmdline ]]; then
-    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
-fi
-
-if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-    readarray -t BOOT_OPTIONS < /proc/cmdline
-fi
-
-unset noimageifnotneeded
-
-for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
-    if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
-        noimageifnotneeded="yes"
-        break
-    fi
-done
+COMMAND="$1"
+KERNEL_VERSION="$2"
+BOOT_DIR_ABS="$3"
+KERNEL_IMAGE="$4"

 ret=0
-case "$1" in
+case "$COMMAND" in
    add)
-	dracut ${noimageifnotneeded+--noimageifnotneeded} "$3"/initrd "$2"
+        INITRD_IMAGE_PREGENERATED=${KERNEL_IMAGE%/*}/initrd
+        if [[ -f ${INITRD_IMAGE_PREGENERATED} ]]; then
+            # we found an initrd at the same place as the kernel
+            # use this and don't generate a new one
+            cp "$INITRD_IMAGE_PREGENERATED" "$BOOT_DIR_ABS/initrd" \
+                && chown root:root "$BOOT_DIR_ABS/initrd" \
+                && chmod 0600 "$BOOT_DIR_ABS/initrd" \
+                && exit 0
+        fi
+
+        if [[ -f /etc/kernel/cmdline ]]; then
+            readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+        fi
+
+        if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
+            read -ar BOOT_OPTIONS < /proc/cmdline
+        fi
+
+        unset noimageifnotneeded
+
+        for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
+            if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
+                noimageifnotneeded="yes"
+                break
+            fi
+        done
+	dracut ${noimageifnotneeded:+--noimageifnotneeded} "$BOOT_DIR_ABS"/initrd "$KERNEL_VERSION"
        ret=$?
 	;;
    remove)
-        rm -f -- "$3"/initrd
+        rm -f -- "$BOOT_DIR_ABS"/initrd
        ret=$?
 	;;
 esac
--- a/51-dracut-rescue-postinst.sh
+++ b/51-dracut-rescue-postinst.sh
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 export LANG=C

--- a/51-dracut-rescue.install
+++ b/51-dracut-rescue.install
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 export LANG=C

@@ -45,7 +43,7 @@ if [[ -f /etc/kernel/cmdline ]]; then
    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
 fi
 if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-    readarray -t BOOT_OPTIONS < /proc/cmdline
+    read -ar BOOT_OPTIONS < /proc/cmdline
 fi
 if ! [[ $BOOT_OPTIONS ]]; then
    exit 1
@@ -75,7 +73,7 @@ case "$COMMAND" in
            echo "Can't copy '$KERNEL_IMAGE to '$BOOT_DIR_ABS/linux'!" >&2
        fi

-        dracut --no-hostonly  -a "rescue" "$BOOT_DIR_ABS"/initrd "$2"
+        dracut --no-hostonly -a "rescue" "$BOOT_DIR_ABS"/initrd "$KERNEL_VERSION"
        ((ret+=$?))

        {
--- a/54
+++ b/54
@@ -7,32 +7,40 @@ Warren Togami <wtogami@redhat.com>
 Jeremy Katz <katzj@redhat.com>
 Dave Young <dyoung@redhat.com>
 David Dillow <dave@thedillows.org>
+Hannes Reinecke <hare@suse.de>
 Michal Soltys <soltys@ziu.info>
 Amerigo Wang <amwang@redhat.com>
 Colin Guthrie <colin@mageia.org>
+Thomas Renninger <trenn@suse.de>
+WANG Chao <chaowang@redhat.com>
 Andrey Borzenkov <arvidjaar@gmail.com>
 Peter Jones <pjones@redhat.com>
 Andreas Thienemann <andreas@bawue.net>
 Hans de Goede <hdegoede@redhat.com>
+Alexander Tsoy <alexander@tsoy.me>
 John Reiser <jreiser@bitwagon.com>
 Luca Berra <bluca@vodka.it>
-WANG Chao <chaowang@redhat.com>
+Brian C. Lane <bcl@redhat.com>
 Daniel Drake <dsd@laptop.org>
 Dan Horák <dhorak@redhat.com>
 Baoquan He <bhe@redhat.com>
 Leho Kraav <leho@kraav.com>
-Brian C. Lane <bcl@redhat.com>
 Kamil Rytarowski <n54@gmx.com>
 Marc Grimme <grimme@atix.de>
+Peter Rajnoha <prajnoha@redhat.com>
+Radek Vykydal <rvykydal@redhat.com>
+Thorsten Behrens <tbehrens@suse.com>
 Chao Wang <chaowang@redhat.com>
+Colin Walters <walters@verbum.org>
 Frederic Crozat <fcrozat@suse.com>
 Jesse Keating <jkeating@redhat.com>
 Milan Broz <mbroz@redhat.com>
-Radek Vykydal <rvykydal@redhat.com>
+Nicolas Chauvet <kwizart@gmail.com>
 Roberto Sassu <roberto.sassu@polito.it>
 Anton Blanchard <anton@samba.org>
 Bill Nottingham <notting@redhat.com>
-Colin Walters <walters@verbum.org>
+Chapman Flack <g2@anastigmatix.net>
+Cristian Rodríguez <crrodriguez@opensuse.org>
 David Cantrell <dcantrell@redhat.com>
 Dennis Gilmore <dennis@ausil.us>
 Jon Ander Hernandez <jonan.h@gmail.com>
@@ -40,66 +48,88 @@ Juan RP <xtraeme@gmail.com>
 Lance Albertson <lance@osuosl.org>
 Marian Ganisin <mganisin@redhat.com>
 Michael Ploujnikov <plouj@somanetworks.com>
-Peter Rajnoha <prajnoha@redhat.com>
+Peter Robinson <pbrobinson@gmail.com>
+Stefan Reimer <it@startux.de>
+Stig Telfer <stelfer@cray.com>
+Vasiliy Tolstov <v.tolstov@selfip.ru>
 Wim Muskee <wimmuskee@gmail.com>
 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
 Alan Pevec <apevec@redhat.com>
+Alex Harpin <development@landsofshadow.co.uk>
+Daniel Schaal <farbing@web.de>
 Frederick Grose <fgrose@sugarlabs.org>
+Hari Bathini <hbathini@linux.vnet.ibm.com>
 Ian Dall <ian@beware.dropbear.id.au>
 James Buren <ryuo@frugalware.org>
 James Lee <jlee@thestaticvoid.com>
 Joey Boggs <jboggs@redhat.com>
+Koen Kooi <koen@dominion.thruhere.net>
 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Kyle McMartin <kmcmarti@redhat.com>
+Lubomir Rintel <lkundrak@v3.sk>
 Mike Snitzer <snitzer@redhat.com>
+Minfei Huang <mhuang@redhat.com>
 Przemysław Rudy <prudy1@o2.pl>
-Stefan Reimer <it@startux.de>
+Thomas Backlund <tmb@mageia.org>
 Thomas Lange <lange@informatik.uni-koeln.de>
+Till Maas <opensource@till.name>
 Vivek Goyal <vgoyal@redhat.com>
 Vladislav Bogdanov <bubble@hoster-ok.com>
 Adam Williamson <awilliam@redhat.com>
 Alexander Todorov <atodorov@redhat.com>
 Andy Lutomirski <luto@mit.edu>
 Anssi Hannula <anssi@mageia.org>
+Antony Messerli <amesserl@rackspace.com>
 Brandon Philips <brandon@ifup.co>
 Canek Peláez Valdés <caneko@gmail.com>
 Chris Leech <cleech@redhat.com>
 Christian Heinz <christian.ch.heinz@gmail.com>
 Cong Wang <amwang@redhat.com>
-Daniel Schaal <farbing@web.de>
+Daniel Drake <drake@endlessm.com>
 Dave Jones <davej@redhat.com>
-Dave Young <dave@redhat.com>
 Dennis Schridde <devurandom@gmx.net>
 Duane Griffin <duaneg@dghda.com>
+Erwan Velu <erwan.velu@enovance.com>
 Glen Gray <slaine@slaine.org>
 Hermann Gausterer <git-dracut-2012@mrq1.org>
 James Laska <jlaska@redhat.com>
 Jan Stodola <jstodola@redhat.com>
 Jiri Pirko <jiri@resnulli.us>
 Joe Lawrence <Joe.Lawrence@stratus.com>
+Julian Wolf <juwolf@suse.com>
 Kevin Yung <Kevin.Yung@myob.com>
-Kyle McMartin <kyle@redhat.com>
 Lars R. Damerow <lars@pixar.com>
 Lennert Buytenhek <buytenh@wantstofly.org>
-Lubomir Rintel <lkundrak@v3.sk>
+Lukas Wunner <lukas@wunner.de>
+Major Hayden <major@mhtx.net>
+Marian Csontos <mcsontos@redhat.com>
+Marko Myllynen <myllynen@redhat.com>
 Matt <smoothsailing72@hotmail.com>
 Matt Smith <shadowfax@gmx.com>
 Michal Schmidt <mschmidt@redhat.com>
 Mike Gorse <mgorse@suse.com>
 Munehiro Matsuda <haro@kgt.co.jp>
-Nicolas Chauvet <kwizart@gmail.com>
+NeilBrown <neilb@suse.de>
 Nikoli <nikoli@lavabit.com>
 Olivier Blin <dev@blino.org>
+P J P <ppandit@redhat.com>
 Paolo Bonzini <pbonzini@redhat.com>
 Peter Robinson <pbrobinson@fedoraproject.org>
+Praveen_Paladugu@Dell.com <Praveen_Paladugu@Dell.com>
 Pádraig Brady <P@draigBrady.com>
 Quentin Armitage <quentin@armitage.org.uk>
 Robert Buchholz <rbu@goodpoint.de>
 Sergey Fionov <fionov@gmail.com>
+Shawn W Dunn <sfalken@opensuse.org>
 Srinivasa T N <seenutn@linux.vnet.ibm.com>
 Thilo Bangert <thilo.bangert@gmx.net>
-Thomas Backlund <tmb@mageia.org>
+Tobias Geerinckx <tobias.geerinckx@gmail.com>
+Tom Gundersen <teg@jklm.no>
 Tomasz Torcz <tomek@pipebreaker.pl>
 Vadim Kuznetsov <vadimk@gentoo.org>
+Vaughan Cao <vaughan.cao@oracle.com>
 Ville Skyttä <ville.skytta@iki.fi>
+Vratislav Podzimek <vpodzime@redhat.com>
 Yanko Kaneti <yaneti@declera.com>
+jloeser <jloeser@suse.de>
 maximilian attems <max@stro.at>
--- a/68
+++ b/68
@@ -13,7 +13,7 @@ sysconfdir ?= ${prefix}/etc
 bindir ?= ${prefix}/bin
 mandir ?= ${prefix}/share/man
 CFLAGS ?= -O2 -g -Wall
-CFLAGS += -std=gnu99  -D_FILE_OFFSET_BITS=64
+CFLAGS += -std=gnu99 -D_FILE_OFFSET_BITS=64 -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
 bashcompletiondir ?= ${datadir}/bash-completion/completions

 man1pages = lsinitrd.1
@@ -21,11 +21,13 @@ man1pages = lsinitrd.1
 man5pages = dracut.conf.5

 man7pages = dracut.cmdline.7 \
-            dracut.bootup.7
+            dracut.bootup.7 \
+            dracut.modules.7

 man8pages = dracut.8 \
            dracut-catimages.8 \
            mkinitrd.8 \
+            mkinitrd-suse.8 \
            modules.d/98systemd/dracut-cmdline.service.8 \
            modules.d/98systemd/dracut-initqueue.service.8 \
            modules.d/98systemd/dracut-mount.service.8 \
@@ -37,15 +39,15 @@ man8pages = dracut.8 \

 manpages = $(man1pages) $(man5pages) $(man7pages) $(man8pages)

-
 .PHONY: install clean archive rpm testimage test all check AUTHORS doc dracut-version.sh

-all: dracut-version.sh dracut-install
+all: dracut-version.sh dracut-install skipcpio/skipcpio

 DRACUT_INSTALL_OBJECTS = \
        install/dracut-install.o \
        install/hashmap.o\
        install/log.o \
+        install/strv.o \
        install/util.o

 # deps generated with gcc -MM
@@ -55,14 +57,22 @@ install/hashmap.o: install/hashmap.c install/util.h install/macro.h install/log.
 	install/hashmap.h
 install/log.o: install/log.c install/log.h install/macro.h install/util.h
 install/util.o: install/util.c install/util.h install/macro.h install/log.h
+install/strv.o: install/strv.c install/strv.h install/util.h install/macro.h install/log.h

 install/dracut-install: $(DRACUT_INSTALL_OBJECTS)

 dracut-install: install/dracut-install
 	ln -fs $< $@

+SKIPCPIO_OBJECTS= \
+	skipcpio/skipcpio.o
+
+skipcpio/skipcpio.o: skipcpio/skipcpio.c
+skipcpio/skipcpio: skipcpio/skipcpio.o
+
 indent:
 	indent -i8 -nut -br -linux -l120 install/dracut-install.c
+	indent -i8 -nut -br -linux -l120 skipcpio/skipcpio.c

 doc: $(manpages) dracut.html

@@ -76,11 +86,13 @@ endif
 %.xml: %.asc
 	asciidoc -d manpage -b docbook -o $@ $<

-dracut.html: dracut.asc $(manpages)
+dracut.8: dracut.usage.asc dracut.8.asc
+
+dracut.html: dracut.asc $(manpages) dracut.css dracut.usage.asc
 	asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc
 	xsltproc -o dracut.html --xinclude -nonet \
-		--stringparam html.stylesheet \
-		http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \
+		--stringparam custom.css.source dracut.css \
+		--stringparam generate.css.header 1 \
 		http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
 	rm -f -- dracut.xml

@@ -113,9 +125,9 @@ endif
 	if [ -n "$(systemdsystemunitdir)" ]; then \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
 		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
-		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants; \
+		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants; \
 		ln -s ../dracut-shutdown.service \
-		$(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants/dracut-shutdown.service; \
+		$(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants/dracut-shutdown.service; \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants; \
 		for i in \
 		    dracut-cmdline.service \
@@ -134,6 +146,9 @@ endif
 	if [ -f install/dracut-install ]; then \
 		install -m 0755 install/dracut-install $(DESTDIR)$(pkglibdir)/dracut-install; \
 	fi
+	if [ -f skipcpio/skipcpio ]; then \
+		install -m 0755 skipcpio/skipcpio $(DESTDIR)$(pkglibdir)/skipcpio; \
+	fi
 	mkdir -p $(DESTDIR)${prefix}/lib/kernel/install.d
 	install -m 0755 50-dracut.install $(DESTDIR)${prefix}/lib/kernel/install.d/50-dracut.install
 	install -m 0755 51-dracut-rescue.install $(DESTDIR)${prefix}/lib/kernel/install.d/51-dracut-rescue.install
@@ -150,29 +165,32 @@ clean:
 	$(RM) */*/*~
 	$(RM) $(manpages:%=%.xml) dracut.xml
 	$(RM) test-*.img
-	$(RM) dracut-*.rpm dracut-*.tar.bz2
+	$(RM) dracut-*.rpm dracut-*.tar.bz2 dracut-*.tar.xz
 	$(RM) dracut-version.sh
 	$(RM) dracut-install install/dracut-install $(DRACUT_INSTALL_OBJECTS)
+	$(RM) skipcpio/skipcpio $(SKIPCPIO_OBJECTS)
 	$(RM) $(manpages) dracut.html
 	$(MAKE) -C test clean

-dist: dracut-$(VERSION).tar.bz2
+dist: dracut-$(VERSION).tar.xz

-dracut-$(VERSION).tar.bz2: doc syncheck
+dracut-$(VERSION).tar.xz: doc syncheck
 	@echo "DRACUT_VERSION=$(VERSION)" > dracut-version.sh
 	git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ > dracut-$(VERSION).tar
 	mkdir -p dracut-$(VERSION)
 	for i in $(manpages) dracut.html dracut-version.sh; do [ "$${i%/*}" != "$$i" ] && mkdir -p "dracut-$(VERSION)/$${i%/*}"; cp "$$i" "dracut-$(VERSION)/$$i"; done
 	tar --owner=root --group=root -rf dracut-$(VERSION).tar $$(find dracut-$(VERSION) -type f)
-	rm -fr -- dracut-$(VERSION).tar.bz2 dracut-$(VERSION)
-	bzip2 -9 dracut-$(VERSION).tar
+	rm -fr -- dracut-$(VERSION).tar.xz dracut-$(VERSION)
+	xz -9 dracut-$(VERSION).tar
 	rm -f -- dracut-$(VERSION).tar

-rpm: dracut-$(VERSION).tar.bz2 syncheck
+rpm: dracut-$(VERSION).tar.xz syncheck
 	rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
-	cp dracut-$(VERSION).tar.bz2 "$$rpmbuild"; \
+	cp dracut-$(VERSION).tar.xz "$$rpmbuild"; \
 	LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
-	(cd "$$rpmbuild"; rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
+	(cd "$$rpmbuild"; \
+	wget https://www.gnu.org/licenses/lgpl-2.1.txt; \
+	rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
 	        --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
 		--define "_rpmdir $$PWD" -ba dracut.spec; ) && \
 	( mv "$$rpmbuild"/$$(arch)/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr -- "$$rpmbuild"; ls *.rpm )
@@ -197,22 +215,30 @@ testimage: all
 	./dracut.sh -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img

+debugtestimage: all
+	./dracut.sh --debug -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	@echo wrote  test-$(shell uname -r).img
+
 testimages: all
 	./dracut.sh -l -a debug --kernel-only -f test-kernel-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img
 	./dracut.sh -l -a debug --no-kernel -f test-dracut.img $(shell uname -r)
 	@echo wrote  test-dracut.img

+debughostimage: all
+	./dracut.sh --debug -H -l -f test-$(shell uname -r).img $(shell uname -r)
+	@echo wrote  test-$(shell uname -r).img
+
 hostimage: all
-	./dracut.sh -H -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	./dracut.sh -H -l -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img

 AUTHORS:
 	git shortlog  --numbered --summary -e |while read a rest; do echo $$rest;done > AUTHORS

-dracut.html.sign: dracut-$(VERSION).tar.bz2
-	gpg-sign-all dracut-$(VERSION).tar.bz2 dracut.html
+dracut.html.sign: dracut-$(VERSION).tar.xz dracut.html
+	gpg-sign-all dracut-$(VERSION).tar.xz dracut.html

 upload: dracut.html.sign
-	kup put dracut-$(VERSION).tar.bz2 dracut-$(VERSION).tar.sign /pub/linux/utils/boot/dracut/
+	kup put dracut-$(VERSION).tar.xz dracut-$(VERSION).tar.sign /pub/linux/utils/boot/dracut/
 	kup put dracut.html dracut.html.sign /pub/linux/utils/boot/dracut/
--- a/202
+++ b/202
@@ -1,3 +1,205 @@
+dracut-041
+==========
+- fixed the shutdown loop
+- fixed gzip compression for versions, which do not have --rsyncable
+- fixed ifcfg generation for persistent interface names
+- multipath:
+  * new option to turn off multipath "rd.multipath=0" completly
+  * preload scsi dh modules
+  * start multipathd via systemd service
+- do not fail, if user pressed ESC during media check
+- fixed systemd-journal by symlinking /var/log to /run/initramfs/log
+- initrd-release moved to /usr/lib
+- lots of iSCSI fixes
+- new "rd.timeout" to specify the systemd JobTimeoutSec for devices
+- if $initrd/etc/cmdline.d/* has a "root=" and the kernel cmdline does not,
+  generate a mount unit for it
+- increased the initqueue timeout for non systemd initramfs to 180s
+- $initrd/etc/cmdline.d/ hostonly files are now generated for NFS
+- make use of systemd-hibernate-resume, if available
+- fixed ldconfig parsing for hwcap output
+- network: add support for comma separated autoconf options like ip=eth0:auto6,dhcp
+- new parameter "rd.live.overlay.size" to specify the overlay for live images
+- changed the test suite for the new sfdisk syntax
+- added cache tools for dm-cache setups
+
+dracut-040
+==========
+- fixed dracut module dependency checks
+- fixed test suite
+
+dracut-039
+==========
+- DRACUT_PATH can now be used to specify the PATH used by dracut
+  to search for binaries instead of the default
+  /usr/sbin:/sbin:/usr/bin:/bin
+  This should be set in the distribution config file
+  /usr/lib/dracut/dracut.conf.d/01-dist.conf
+- add "--loginstall <DIR>" and loginstall="<DIR>" options
+  to record all files, which are installed from the host fs
+- "rd.writable.fsimg" - support for read/write filesystem images
+- "rd.route" kernel command line parameter added
+- "--install-optional" and install_optional_items added
+- find plymouth pkglibdir on debian
+- torrent support for live images
+  root=live:torrent://example.com/liveboot.img.torrent
+  and generally added as a download handler
+- disable microcode, if the kernel does not support it
+- speed up ldconfig_paths()
+- more ARM modules
+- fixed inst*() functions and "-H" handling
+- fixed bridge setup
+- added --force-drivers parameter and force_drivers=+ config option
+  to enforce driver loading at early boot time
+- documented "iso-scan/filename" usage in grub
+- various bugfixes
+
+dracut-038
+==========
+- "rd.cmdline=ask" will ask the user on the console to enter additional
+  kernel command line parameters
+- "rd.hostonly=0" removes all "hostonly" added custom files,
+  which is useful in combination with "rd.auto" or other specific parameters,
+  if you want to boot on the same hardware, but the compiled in configuration
+  does not match your setup anymore
+- inst* functions and dracut-install now accept the "-H" flag, which logs all
+  installed files to /lib/dracut/hostonly-files. This is used to remove those
+  files, if rd.hostonly is given on the kernel command line
+- strstr now only does literal string match,
+  please use strglob and strglobin for globs
+- fixed unpacking of the microcode image on shutdown
+- added systemd-gpt-auto-generator
+- fcoe: wait for lldpad to be ready
+- network: handle "ip=dhcp6"
+- network: DCHPv6: set valid_lft and preferred_lft
+- dm: support dm-cache
+- fstab: do not mount and fsck from fstab if using systemd
+- break at switch_root only for bare rd.break and not for any rd.break=...
+- nbd: make use of "--systemd-mark", otherwise it gets killed on switch_root
+- fcoe-uefi: fixed cmdline parameter generation
+- iscsi: deprecate "ip=ibft", use "rd.iscsi.ibft[=1]" from now on
+- "lsinitrd -m" now only lists the dracut modules of the image
+- a lot of small bugfixes
+
+dracut-037
+==========
+- dracut: hostonly_cmdline variable and command line switch
+    Toggle hostonly cmdline storing in the initramfs
+    --hostonly-cmdline:
+        Store kernel command line arguments needed in the initramfs
+    --no-hostonly-cmdline:
+        Do not store kernel command line arguments needed in the initramfs
+- dracut: --mount now understands full fstab lines
+- dracut now also includes drivers from the /lib/modules/<version>/updates directory
+- dracut: only set the owner of files to 0:0, if generated as non-root
+- dracut now directly writes to the initramfs file
+- dracut: call lz4 with the legacy flag (linux kernel does not support the new format)
+- systemd: rootfs-generator generates JobTimeout=0 units for the root device
+- systemd: added the systemd-sysctl service
+- systemd: add 80-net-setup-link.rules and .link files for persistent interface renaming
+- systemd: make dracut-shutdown.service failure non-fatal
+- network: various IPv6 fixes
+- network: DCHCP for IPv6
+- network: understand ip=.....:<dns1>:<dns2>
+- network: parse ibft nameserver settings
+- shutdown: if kexec fails, just reboot
+- lvm: handle one LV at a time with lvchange
+- module-setup.sh:
+    New functions require_binaries() and require_any_binary() to be used
+    in the check() section of module-setup.sh.
+- a lot of small bugfixes
+
+Contributions from:
+Harald Hoyer
+Alexander Tsoy
+Till Maas
+Amadeusz Żołnowski
+Brian C. Lane
+Colin Guthrie
+Dave Young
+WANG Chao
+Shawn W Dunn
+
+dracut-036
+==========
+- fixed skipcpio signature checking
+
+dracut-035
+==========
+- changed dracut tarball compression to xz
+- new argument "--rebuild"
+- add lzo, lz4 compression
+- install: install all binaries with <name> found in PATH
+- lsinitrd can now handle initramfs images with an early cpio prepended
+  (microcode, ACPI tables)
+- mkinitrd-suse added as a compat stub for dracut
+- lvm: install thin utils for non-hostonly
+- resume: fix swap detection in hostonly
+- avoid loading unnecessary 32-bit libraries for 64-bit initrds
+- crypt: wait for systemd password agents
+- crypt: skip crypt swaps with password files
+- network: before doing dhcp, dracut now checks, if the link has a carrier
+- network: dhclient-script.sh now sets the lease time
+- network: include usbnet drivers
+- network: include all ethernet drivers
+- network: add rd.bootif=0 to ignore BOOTIF
+- i18n: introduce i18n_install_all, to install everything i18n related
+- support SuSE DASD configurations
+- support SuSE zfcp configurations
+- support SuSE compressed KEYMAP= setting
+- usrmount: always install the module,
+  so always mount /usr from within the initramfs
+- test/TEST-17-LVM-THIN: new test case for lvm thin pools
+- "halt" the machine in systemd mode for die()
+
+dracut-034
+==========
+- do not run dhcp on parts of assembled network interfaces (bond, bridge)
+- add option to turn on/off prelinking
+    --prelink, --noprelink
+    do_prelink=[yes|no]
+- add ACPI table overriding
+- do not log to syslog/kmsg/journal for UID != 0
+- lvm/mdraid: Fix LVM on MD activation
+- bcache module removed (now in bcache-tools upstream)
+- mdadm: also install configs from /etc/mdadm.conf.d
+- fixes for mdadm-3.2.6+
+- mkinitrd: better compat support for SUSE
+- fcoe: add FCoE UEFI boot device support
+- rootfs-block: add support for the rootfallback= kernel cmdline option
+
+Contributions from:
+Thomas Renninger
+Alexander Tsoy
+Peter Rajnoha
+WANG Chao
+Harald Hoyer
+
+
+dracut-033
+==========
+- improved hostonly device recognition
+- improved hostonly module recognition
+- add dracut.css for dracut.html
+- do not install udev rules from /etc in generic mode
+- fixed LABEL= parsing for swap devices
+- fixed iBFT network setup
+- url-lib.sh: handle 0-size files with curl
+- dracut.asc: document debugging dracut on shutdown
+- if rd.md=0, use dmraid for imsm and ddf
+- skip empty dracut modules
+- removed caching of kernel cmdline
+- fixed iso-scan, if the loop device driver is a kernel module
+- bcache: support new blkid
+- fixed ifup udev rules
+- ifup with dhcp, if no "ip=" specified for the interface
+
+Contributions from:
+WANG Chao
+Colin Walters
+Harald Hoyer
+
+
 dracut-032
 ==========
 - add parameter --print-cmdline
--- a/README.testsuite
+++ b/README.testsuite
@@ -1,14 +1,16 @@
 For the testsuite to work, you will have to install at least the following software packages:
-dash
-asciidoc
-mdadm
-lvm2
-cryptsetup
-nfs-utils
-netbsd-iscsi
-nbd
-dhcp (dhcp-server on openSUSE)
+dash \
+asciidoc \
+mdadm \
+lvm2 \
+cryptsetup \
+nfs-utils \
+netbsd-iscsi \
+nbd \
+dhcp-server \
 iscsi-initiator-utils
+
+
 TEST-04-FULL-SYSTEMD: systemd >= 187

 How to run the testsuite:
--- a/9
+++ b/9
@@ -6,6 +6,10 @@ Items are ordered in priority.

 INITRAMFS TODO

+- allow dual stack configuration (IPv4, IPv6) for the same interface
+- "bind-mount" kernel drivers in real root for the rescue image,
+  if the real root does not have any kernel modules for this kernel
+  https://bugzilla.redhat.com/show_bug.cgi?id=1046510
 - use info and warn prefix
 - generate systemd unit dracut-initramfs-restore in /run/systemd dynamically
 - put "root=" parsing hooks in separate hook dir
@@ -22,7 +26,9 @@ INITRAMFS TODO

 GENERATOR TODO

+- report errors on missing files in check()
 - remove wait for swap devs, if no "resume=" is given on the kernel command line
+- remove wait for swap devs, if the "resume" dracut module is not included (omitted)
 - add presets (predefined set of modules)
 - add interpreter/plugin-scripts to be sourced at the beginning or end (can use dracut-functions)
 - add mechanism for module specific command line options
@@ -42,3 +48,6 @@ Future Enhancement Requests
 - run ssh server to enter crypto password or perform debugging (supported by debian)
 - https://bugzilla.redhat.com/show_bug.cgi?id=524727 - dracut + encrypted root + networking

+- lsinitrd --print-cmdline
+- dracut --print-cmdline error if additional arguments
+- library for cmdline
--- a/2
+++ b/2
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 # We don't support srcdir != builddir
 echo \#buildapi-variable-no-builddir >/dev/null
--- a/dracut-bash-completion.sh
+++ b/dracut-bash-completion.sh
@@ -1,6 +1,3 @@
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Copyright 2013 Red Hat, Inc.  All rights reserved.
 #
@@ -34,13 +31,16 @@ _dracut() {
                              --local --hostonly --no-hostonly --fstab --help --bzip2 --lzma
                              --xz --no-compress --gzip --list-modules --show-modules --keep
                              --printsize --regenerate-all --noimageifnotneeded --early-microcode
-                              --no-early-microcode --print-cmdline'
+                              --no-early-microcode --print-cmdline --prelink --noprelink --reproducible
+                              '

                       [ARG]='-a -m -o -d -I -k -c -L --kver --add --force-add --add-drivers
                              --omit-drivers --modules --omit --drivers --filesystems --install
                              --fwdir --libdirs --fscks --add-fstab --mount --device --nofscks
                              --kmoddir --conf --confdir --tmpdir --stdlog --compress --prefix
-                              --kernel-cmdline --sshkey --persistent-policy'
+                              --kernel-cmdline --sshkey --persistent-policy --install-optional
+                              --loginstall
+                              '
        )

        if __contains_word "$prev" ${OPTS[ARG]}; then
@@ -49,7 +49,7 @@ _dracut() {
                                comps=$(compgen -d -- "$cur")
                                compopt -o filenames
                        ;;
-                        -c|--conf|--sshkey|--add-fstab|--add-device|-I|--install)
+                        -c|--conf|--sshkey|--add-fstab|--add-device|-I|--install|--install-optional)
                                comps=$(compgen -f -- "$cur")
                                compopt -o filenames
                        ;;
--- a/dracut-catimages.sh
+++ b/dracut-catimages.sh
@@ -1,6 +1,4 @@
 #!/bin/bash --norc
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Copyright 2009 Red Hat, Inc.  All rights reserved.
 #
--- a/dracut-functions.sh
+++ b/dracut-functions.sh
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # functions used by dracut and other tools.
 #
@@ -33,7 +31,56 @@ if [[ $initdir ]] && ! [[ -d $initdir ]]; then
 fi

 # Generic substring function.  If $2 is in $1, return 0.
-strstr() { [[ $1 = *$2* ]]; }
+strstr() { [[ $1 = *"$2"* ]]; }
+# Generic glob matching function. If glob pattern $2 matches anywhere in $1, OK
+strglobin() { [[ $1 = *$2* ]]; }
+# Generic glob matching function. If glob pattern $2 matches all of $1, OK
+strglob() { [[ $1 = $2 ]]; }
+
+# helper function for check() in module-setup.sh
+# to check for required installed binaries
+# issues a standardized warning message
+require_binaries() {
+    local _module_name="${moddir##*/}"
+    local _ret=0
+
+    if [[ "$1" = "-m" ]]; then
+        _module_name="$2"
+        shift 2
+    fi
+
+    for cmd in "$@"; do
+        if ! find_binary "$cmd" &>/dev/null; then
+            dinfo "dracut module '${_module_name#[0-9][0-9]}' will not be installed, because command '$cmd' could not be found!"
+            ((_ret++))
+        fi
+    done
+    return $_ret
+}
+
+require_any_binary() {
+    local _module_name="${moddir##*/}"
+    local _ret=1
+
+    if [[ "$1" = "-m" ]]; then
+        _module_name="$2"
+        shift 2
+    fi
+
+    for cmd in "$@"; do
+        if find_binary "$cmd" &>/dev/null; then
+            _ret=0
+            break
+        fi
+    done
+
+    if (( $_ret != 0 )); then
+        dinfo "$_module_name: Could not find any command of '$@'!"
+        return 1
+    fi
+
+    return 0
+}

 # find a binary.  If we were not passed the full path directly,
 # search in the usual places to find the binary.
@@ -57,17 +104,7 @@ fi

 ldconfig_paths()
 {
-    local a i
-    declare -A a
-    for i in $(
-        ldconfig -pN 2>/dev/null | while read a b c d; do
-            [[ "$c" != "=>" ]] && continue
-            printf "%s\n" ${d%/*};
-        done
-    ); do
-        a["$i"]=1;
-    done;
-    printf "%s\n" ${!a[@]}
+    ldconfig -pN 2>/dev/null | grep -E -v '/(lib|lib64|usr/lib|usr/lib64)/[^/]*$' | sed -n 's,.* => \(.*\)/.*,\1,p' | sort | uniq
 }

 # Detect lib paths
@@ -81,7 +118,7 @@ if ! [[ $libdirs ]] ; then
        [[ -d /usr/lib ]] && libdirs+=" /usr/lib"
    fi

-    libdirs+="$(ldconfig_paths)"
+    libdirs+=" $(ldconfig_paths)"

    export libdirs
 fi
@@ -129,7 +166,13 @@ srcmods="/lib/modules/$kernel/"
 }
 export srcmods

-if ! type dinfo >/dev/null 2>&1; then
+# is_func <command>
+# Check whether $1 is a function.
+is_func() {
+    [[ "$(type -t "$1")" = "function" ]]
+}
+
+if ! is_func dinfo >/dev/null 2>&1; then
    . "$dracutbasedir/dracut-logger.sh"
    dlog_init
 fi
@@ -162,12 +205,6 @@ mksubdirs() {
    [[ -e ${1%/*} ]] || mkdir -m 0755 -p -- "${1%/*}"
 }

-# is_func <command>
-# Check whether $1 is a function.
-is_func() {
-    [[ "$(type -t "$1")" = "function" ]]
-}
-
 # Function prints global variables in format name=value line by line.
 # $@ = list of global variables' name
 print_vars() {
@@ -175,7 +212,7 @@ print_vars() {

    for _var in "$@"
    do
-        eval printf -v _value "%s" "\$$_var"
+        eval printf -v _value "%s" \""\$$_var"\"
        [[ ${_value} ]] && printf '%s="%s"\n' "$_var" "$_value"
    done
 }
@@ -296,6 +333,23 @@ get_maj_min() {
    printf "%s" "$((0x${_majmin%:*})):$((0x${_majmin#*:}))"
 }

+
+# get_devpath_block <device>
+# get the DEVPATH in /sys of a block device
+get_devpath_block() {
+    local _majmin _i
+    _majmin=$(get_maj_min "$1")
+
+    for _i in /sys/block/*/dev /sys/block/*/*/dev; do
+        [[ -e "$_i" ]] || continue
+        if [[ "$_majmin" == "$(<"$_i")" ]]; then
+            printf "%s" "${_i%/dev}"
+            return 0
+        fi
+    done
+    return 1
+}
+
 # get a persistent path from a device
 get_persistent_dev() {
    local i _tmp _dev
@@ -313,6 +367,7 @@ get_persistent_dev() {
        /dev/disk/by-id/* \
        /dev/disk/by-path/* \
        ; do
+        [[ -e "$i" ]] || continue
        [[ $i == /dev/mapper/control ]] && continue
        [[ $i == /dev/mapper/mpath* ]] && continue
        _tmp=$(get_maj_min "$i")
@@ -321,21 +376,46 @@ get_persistent_dev() {
            return
        fi
    done
+    printf -- "%s" "$1"
+}
+
+expand_persistent_dev() {
+    local _dev=$1
+
+    case "$_dev" in
+        LABEL=*)
+            _dev="/dev/disk/by-label/${_dev#LABEL=}"
+            ;;
+        UUID=*)
+            _dev="${_dev#UUID=}"
+            _dev="${_dev,,}"
+            _dev="/dev/disk/by-uuid/${_dev}"
+            ;;
+        PARTUUID=*)
+            _dev="${_dev#PARTUUID=}"
+            _dev="${_dev,,}"
+            _dev="/dev/disk/by-partuuid/${_dev}"
+            ;;
+        PARTLABEL=*)
+            _dev="/dev/disk/by-partlabel/${_dev#PARTLABEL=}"
+            ;;
+    esac
+    printf "%s" "$_dev"
 }

 shorten_persistent_dev() {
-    local dev="$1"
-    case "$dev" in
+    local _dev="$1"
+    case "$_dev" in
        /dev/disk/by-uuid/*)
-            printf "%s" "UUID=${dev##*/}";;
+            printf "%s" "UUID=${_dev##*/}";;
        /dev/disk/by-label/*)
-            printf "%s" "LABEL=${dev##*/}";;
+            printf "%s" "LABEL=${_dev##*/}";;
        /dev/disk/by-partuuid/*)
-            printf "%s" "PARTUUID=${dev##*/}";;
+            printf "%s" "PARTUUID=${_dev##*/}";;
        /dev/disk/by-partlabel/*)
-            printf "%s" "PARTLABEL=${dev##*/}";;
+            printf "%s" "PARTLABEL=${_dev##*/}";;
        *)
-            printf "%s" "$dev";;
+            printf "%s" "$_dev";;
    esac
 }

@@ -537,7 +617,7 @@ host_fs_all()
 check_block_and_slaves() {
    local _x
    [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry.
-    "$1" $2 && return
+    if ! lvm_internal_dev $2; then "$1" $2 && return; fi
    check_vol_slaves "$@" && return 0
    if [[ -f /sys/dev/block/$2/../dev ]]; then
        check_block_and_slaves $1 $(<"/sys/dev/block/$2/../dev") && return 0
@@ -553,7 +633,7 @@ check_block_and_slaves() {
 check_block_and_slaves_all() {
    local _x _ret=1
    [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry.
-    if "$1" $2; then
+    if ! lvm_internal_dev $2 && "$1" $2; then
        _ret=0
    fi
    check_vol_slaves "$@" && return 0
@@ -608,10 +688,12 @@ for_each_host_dev_and_slaves()
 # but you cannot create the logical volume without the volume group.
 # And the volume group might be bigger than the devices the LV needs.
 check_vol_slaves() {
-    local _lv _vg _pv
+    local _lv _vg _pv _dm
    for i in /dev/mapper/*; do
        [[ $i == /dev/mapper/control ]] && continue
        _lv=$(get_maj_min $i)
+        _dm=/sys/dev/block/$_lv/dm
+        [[ -f $_dm/uuid  && $(<$_dm/uuid) =~ LVM-* ]] || continue
        if [[ $_lv = $2 ]]; then
            _vg=$(lvm lvs --noheadings -o vg_name $i 2>/dev/null)
            # strip space
@@ -647,13 +729,14 @@ fs_get_option() {
    done
 }

-
 if ! [[ $DRACUT_INSTALL ]]; then
    DRACUT_INSTALL=$(find_binary dracut-install)
 fi

 if ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/dracut-install ]]; then
    DRACUT_INSTALL=$dracutbasedir/dracut-install
+elif ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/install/dracut-install ]]; then
+    DRACUT_INSTALL=$dracutbasedir/install/dracut-install
 fi

 if ! [[ -x $DRACUT_INSTALL ]]; then
@@ -664,38 +747,51 @@ fi
 [[ $DRACUT_RESOLVE_LAZY ]] || export DRACUT_RESOLVE_DEPS=1
 inst_dir() {
    [[ -e ${initdir}/"$1" ]] && return 0  # already there
-    $DRACUT_INSTALL ${initdir+-D "$initdir"} -d "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} -d "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} -d "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} -d "$@" || :
 }

 inst() {
+    local _hostonly_install
+    if [[ "$1" == "-H" ]]; then
+        _hostonly_install="-H"
+        shift
+    fi
    [[ -e ${initdir}/"${2:-$1}" ]] && return 0  # already there
-        #dinfo "$DRACUT_INSTALL -l $@"
-    $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
 }

 inst_simple() {
+    local _hostonly_install
+    if [[ "$1" == "-H" ]]; then
+        _hostonly_install="-H"
+        shift
+    fi
    [[ -e ${initdir}/"${2:-$1}" ]] && return 0  # already there
    [[ -e $1 ]] || return 1  # no source
-    $DRACUT_INSTALL ${initdir+-D "$initdir"} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@" || :
 }

 inst_symlink() {
+    local _hostonly_install
+    if [[ "$1" == "-H" ]]; then
+        _hostonly_install="-H"
+        shift
+    fi
    [[ -e ${initdir}/"${2:-$1}" ]] && return 0  # already there
    [[ -L $1 ]] || return 1
-    $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l}  ${DRACUT_FIPS_MODE+-H} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l}  ${DRACUT_FIPS_MODE+-H} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
 }

 inst_multiple() {
-    local ret
-        #dinfo "initdir=$initdir $DRACUT_INSTALL -l $@"
-    $DRACUT_INSTALL ${initdir+-D "$initdir"} -a ${DRACUT_RESOLVE_DEPS+-l}  ${DRACUT_FIPS_MODE+-H} "$@"
-    ret=$?
-    (($ret != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} -a ${DRACUT_RESOLVE_DEPS+-l}  ${DRACUT_FIPS_MODE+-H} "$@" || :
-    return $ret
+    local _ret
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@"
+    _ret=$?
+    (($_ret != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
+    return $_ret
 }

 dracut_install() {
@@ -703,20 +799,31 @@ dracut_install() {
 }

 inst_library() {
+    local _hostonly_install
+    if [[ "$1" == "-H" ]]; then
+        _hostonly_install="-H"
+        shift
+    fi
    [[ -e ${initdir}/"${2:-$1}" ]] && return 0  # already there
    [[ -e $1 ]] || return 1  # no source
-    $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l}  ${DRACUT_FIPS_MODE+-H} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l}  ${DRACUT_FIPS_MODE+-H} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
 }

 inst_binary() {
-    $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l}  ${DRACUT_FIPS_MODE+-H} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l}  ${DRACUT_FIPS_MODE+-H} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@" || :
 }

 inst_script() {
-    $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l}  ${DRACUT_FIPS_MODE+-H} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l}  ${DRACUT_FIPS_MODE+-H} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@" || :
+}
+
+mark_hostonly() {
+    for i in "$@"; do
+        echo "$i" >> "$initdir/lib/dracut/hostonly-files"
+    done
 }

 # find symlinks linked to given library file
@@ -830,8 +937,8 @@ inst_rules() {
    inst_dir "$_target"
    for _rule in "$@"; do
        if [ "${_rule#/}" = "$_rule" ]; then
-            for r in ${udevdir}/rules.d /etc/udev/rules.d; do
-                if [[ -f $r/$_rule ]]; then
+            for r in ${udevdir}/rules.d ${hostonly:+/etc/udev/rules.d}; do
+                if [[ -e $r/$_rule ]]; then
                    _found="$r/$_rule"
                    inst_rule_programs "$_found"
                    inst_rule_group_owner "$_found"
@@ -840,7 +947,10 @@ inst_rules() {
                fi
            done
        fi
-        for r in '' ./ $dracutbasedir/rules.d/; do
+        for r in '' $dracutbasedir/rules.d/; do
+            # skip rules without an absolute path
+            [[ "${r}$_rule" != /* ]] && continue
+
            if [[ -f ${r}$_rule ]]; then
                _found="${r}$_rule"
                inst_rule_programs "$_found"
@@ -853,6 +963,34 @@ inst_rules() {
    done
 }

+inst_rules_wildcard() {
+    local _target=/etc/udev/rules.d _rule _found
+
+    inst_dir "${udevdir}/rules.d"
+    inst_dir "$_target"
+    for _rule in ${udevdir}/rules.d/$1 ${dracutbasedir}/rules.d/$1 ; do
+        if [[ -e $_rule ]]; then
+            inst_rule_programs "$_rule"
+            inst_rule_group_owner "$_rule"
+            inst_rule_initqueue "$_rule"
+            inst_simple "$_rule"
+            _found=$_rule
+        fi
+    done
+    if [ -n ${hostonly} ] ; then
+        for _rule in ${_target}/$1 ; do
+            if [[ -f $_rule ]]; then
+                inst_rule_programs "$_rule"
+                inst_rule_group_owner "$_rule"
+                inst_rule_initqueue "$_rule"
+                inst_simple "$_rule"
+                _found=$_rule
+            fi
+        done
+    fi
+    [[ $_found ]] || dinfo "Skipping udev rule: $_rule"
+}
+
 prepare_udev_rules() {
    [ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version)

@@ -1010,7 +1148,7 @@ module_check() {
        . $_moddir/module-setup.sh
        is_func check || return 0
        [ $_forced -ne 0 ] && unset hostonly
-        check $hostonly
+        moddir=$_moddir check $hostonly
        _ret=$?
        unset check depends cmdline install installkernel
    fi
@@ -1036,7 +1174,7 @@ module_check_mount() {
        unset check depends cmdline install installkernel
        check() { false; }
        . $_moddir/module-setup.sh
-        check 0
+        moddir=$_moddir check 0
        _ret=$?
        unset check depends cmdline install installkernel
    fi
@@ -1060,7 +1198,7 @@ module_depends() {
        unset check depends cmdline install installkernel
        depends() { true; }
        . $_moddir/module-setup.sh
-        depends
+        moddir=$_moddir depends
        _ret=$?
        unset check depends cmdline install installkernel
        return $_ret
@@ -1081,7 +1219,7 @@ module_cmdline() {
        unset check depends cmdline install installkernel
        cmdline() { true; }
        . $_moddir/module-setup.sh
-        cmdline
+        moddir=$_moddir cmdline
        _ret=$?
        unset check depends cmdline install installkernel
        return $_ret
@@ -1102,7 +1240,7 @@ module_install() {
        unset check depends cmdline install installkernel
        install() { true; }
        . $_moddir/module-setup.sh
-        install
+        moddir=$_moddir install
        _ret=$?
        unset check depends cmdline install installkernel
        return $_ret
@@ -1123,7 +1261,7 @@ module_installkernel() {
        unset check depends cmdline install installkernel
        installkernel() { true; }
        . $_moddir/module-setup.sh
-        installkernel
+        moddir=$_moddir installkernel
        _ret=$?
        unset check depends cmdline install installkernel
        return $_ret
@@ -1170,13 +1308,17 @@ check_mount() {
        fi
    fi

-
    for _moddep in $(module_depends $_mod); do
        # handle deps as if they were manually added
-        [[ " $add_dracutmodules " == *\ $_moddep\ * ]] || \
-            add_dracutmodules+=" $_moddep "
-        [[ " $force_add_dracutmodules " == *\ $_moddep\ * ]] || \
-            force_add_dracutmodules+=" $_moddep "
+        [[ " $dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $dracutmodules " != *\ $_moddep\ * ]] \
+            && dracutmodules+=" $_moddep "
+        [[ " $add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \
+            && add_dracutmodules+=" $_moddep "
+        [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \
+            && force_add_dracutmodules+=" $_moddep "
        # if a module we depend on fail, fail also
        if ! check_module $_moddep; then
            derror "dracut module '$_mod' depends on '$_moddep', which can't be installed"
@@ -1214,7 +1356,7 @@ check_module() {
    fi

    if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then
-        if [[ " $force_add_dracutmodules " == *\ $_mod\ * ]]; then
+        if [[ " $dracutmodules $force_add_dracutmodules " == *\ $_mod\ * ]]; then
            module_check $_mod 1; ret=$?
        else
            module_check $_mod 0; ret=$?
@@ -1225,7 +1367,11 @@ check_module() {
        # module not in our list
        if [[ $dracutmodules = all ]]; then
            # check, if we can and should install this module
-            module_check $_mod || return 1
+            module_check $_mod; ret=$?
+            if [[ $ret != 0 ]]; then
+                [[ $2 ]] && return 1
+                [[ $ret != 255 ]] && return 1
+            fi
        else
            # skip this module
            return 1
@@ -1234,10 +1380,15 @@ check_module() {

    for _moddep in $(module_depends $_mod); do
        # handle deps as if they were manually added
-        [[ " $add_dracutmodules " == *\ $_moddep\ * ]] || \
-            add_dracutmodules+=" $_moddep "
-        [[ " $force_add_dracutmodules " == *\ $_moddep\ * ]] || \
-            force_add_dracutmodules+=" $_moddep "
+        [[ " $dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $dracutmodules " != *\ $_moddep\ * ]] \
+            && dracutmodules+=" $_moddep "
+        [[ " $add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \
+            && add_dracutmodules+=" $_moddep "
+        [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \
+            && force_add_dracutmodules+=" $_moddep "
        # if a module we depend on fail, fail also
        if ! check_module $_moddep; then
            derror "dracut module '$_mod' depends on '$_moddep', which can't be installed"
@@ -1260,17 +1411,28 @@ for_each_module_dir() {
    local _func
    _func=$1
    for _moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
+        [[ -d $_moddir ]] || continue;
+        [[ -e $_moddir/install || -e $_moddir/installkernel || \
+            -e $_moddir/module-setup.sh ]] || continue
        _mod=${_moddir##*/}; _mod=${_mod#[0-9][0-9]}
        $_func $_mod 1
    done

    # Report any missing dracut modules, the user has specified
    _modcheck="$add_dracutmodules $force_add_dracutmodules"
-    [[ $dracutmodules != all ]] && _modcheck="$m $dracutmodules"
+    [[ $dracutmodules != all ]] && _modcheck="$_modcheck $dracutmodules"
    for _mod in $_modcheck; do
        [[ " $mods_to_load " == *\ $_mod\ * ]] && continue
-        [[ " $omit_dracutmodules " == *\ $_mod\ * ]] && continue
+
+        [[ " $force_add_dracutmodules " != *\ $_mod\ * ]] \
+            && [[ " $dracutmodules " != *\ $_mod\ * ]] \
+            && [[ " $omit_dracutmodules " == *\ $_mod\ * ]] \
+            && continue
+
        derror "dracut module '$_mod' cannot be found or installed."
+        [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] && exit 1
+        [[ " $dracutmodules " == *\ $_mod\ * ]] && exit 1
+        [[ " $add_dracutmodules " == *\ $_mod\ * ]] && exit 1
    done
 }

@@ -1289,7 +1451,7 @@ install_kmod_with_fw() {

    if [[ $omit_drivers ]]; then
        local _kmod=${1##*/}
-        _kmod=${_kmod%.ko}
+        _kmod=${_kmod%.ko*}
        _kmod=${_kmod/-/_}
        if [[ "$_kmod" =~ $omit_drivers ]]; then
            dinfo "Omitting driver $_kmod"
@@ -1303,7 +1465,7 @@ install_kmod_with_fw() {

    if [[ $silent_omit_drivers ]]; then
        local _kmod=${1##*/}
-        _kmod=${_kmod%.ko}
+        _kmod=${_kmod%.ko*}
        _kmod=${_kmod/-/_}
        [[ "$_kmod" =~ $silent_omit_drivers ]] && return 0
        [[ "${1##*/lib/modules/$kernel/}" =~ $silent_omit_drivers ]] && return 0
@@ -1362,7 +1524,7 @@ dracut_kernel_post() {
    local _pid

    if [[ $DRACUT_KERNEL_LAZY_HASHDIR ]] && [[ -f "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist" ]]; then
-        xargs -r modprobe -a ${_moddirname+-d ${_moddirname}/} \
+        xargs -r modprobe -a ${_moddirname:+-d ${_moddirname}/} \
            --ignore-install --show-depends --set-version $kernel \
            < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist" 2>/dev/null \
            | sort -u \
@@ -1373,7 +1535,7 @@ dracut_kernel_post() {

        (
            if [[ $DRACUT_INSTALL ]] && [[ -z $_moddirname ]]; then
-                xargs -r $DRACUT_INSTALL ${initdir+-D "$initdir"} -a < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"
+                xargs -r $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} -a < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"
            else
                while read _modpath; do
                    local _destpath=$_modpath
@@ -1392,7 +1554,7 @@ dracut_kernel_post() {
                for _fwdir in $fw_dir; do
                    echo $_fwdir/$line;
                done;
-            done | xargs -r $DRACUT_INSTALL ${initdir+-D "$initdir"} -a -o
+            done | xargs -r $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} -a -o
        else
            for _fw in $(xargs -r modinfo -k $kernel -F firmware < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"); do
                for _fwdir in $fw_dir; do
@@ -1407,13 +1569,6 @@ dracut_kernel_post() {
        wait $_pid
    fi

-    for _f in modules.builtin.bin modules.builtin; do
-        [[ $srcmods/$_f ]] && break
-    done || {
-        dfatal "No modules.builtin.bin and modules.builtin found!"
-        return 1
-    }
-
    for _f in modules.builtin.bin modules.builtin modules.order; do
        [[ $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f"
    done
@@ -1428,23 +1583,47 @@ dracut_kernel_post() {
    [[ $DRACUT_KERNEL_LAZY_HASHDIR ]] && rm -fr -- "$DRACUT_KERNEL_LAZY_HASHDIR"
 }

+[[ "$kernel_current" ]] || export kernel_current=$(uname -r)
+
 module_is_host_only() {
    local _mod=$1
+    local _modenc a i _k _s _v _aliases
    _mod=${_mod##*/}
-    _mod=${_mod%.ko}
+    _mod=${_mod%.ko*}
+    _modenc=${_mod//-/_}

    [[ " $add_drivers " == *\ ${_mod}\ * ]] && return 0

    # check if module is loaded
-    for i in /sys/module/${_mod//-/_}; do
-        [[ -d $i ]] && return 0
-    done
+    [[ ${host_modules["$_modenc"]} ]] && return 0

-    # check if module is loadable on the current kernel
-    # this covers the case, where a new module is introduced
-    # or a module was renamed
-    # or a module changed from builtin to a module
-    modinfo -F filename "$_mod" &>/dev/null || return 0
+    [[ "$kernel_current" ]] || export kernel_current=$(uname -r)
+
+    if [[ "$kernel_current" != "$kernel" ]]; then
+        # check if module is loadable on the current kernel
+        # this covers the case, where a new module is introduced
+        # or a module was renamed
+        # or a module changed from builtin to a module
+
+        if [[ -d /lib/modules/$kernel_current ]]; then
+            # if the modinfo can be parsed, but the module
+            # is not loaded, then we can safely return 1
+            modinfo -F filename "$_mod" &>/dev/null && return 1
+        fi
+
+        _aliases=$(modinfo -k $kernel -F alias $_mod 2>/dev/null)
+
+        # if the module has no aliases, install it
+        [[ $_aliases ]] || return 0
+
+        # finally check all modalias
+        for a in $_aliases; do
+            for i in "${!host_modalias[@]}"; do
+                [[ $i == $a ]]  && return 0
+            done
+        done
+
+    fi

    return 1
 }
@@ -1457,7 +1636,7 @@ find_kernel_modules_by_path () {
    _OLDIFS=$IFS
    IFS=:
    while read a rest; do
-        [[ $a = */$1/* ]] || continue
+        [[ $a = */$1/* ]] || [[ $a = updates/* ]] || continue
        printf "%s\n" "$srcmods/$a"
    done < "$srcmods/modules.dep"
    IFS=$_OLDIFS
@@ -1500,11 +1679,18 @@ instmods() {
            --*) _mpargs+=" $_mod" ;;
            *)
                _mod=${_mod##*/}
+                # Check for aliased modules
+                _modalias=$(modinfo -k $kernel -F filename $_mod 2> /dev/null)
+                _modalias=${_modalias%.ko*}
+                if [[ $_modalias ]] && [ "${_modalias##*/}" != "${_mod%.ko*}" ] ; then
+                    _mod=${_modalias##*/}
+                fi
+
                # if we are already installed, skip this module and go on
                # to the next one.
                if [[ $DRACUT_KERNEL_LAZY_HASHDIR ]] && \
-                    [[ -f "$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko}.ko" ]]; then
-                    read _ret <"$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko}.ko"
+                    [[ -f "$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko*}" ]]; then
+                    read _ret <"$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko*}"
                    return $_ret
                fi

@@ -1534,7 +1720,7 @@ instmods() {
                    ((_ret+=$?))
                else
                    [[ $DRACUT_KERNEL_LAZY_HASHDIR ]] && \
-                        echo $_mod >> "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist"
+                        echo ${_mod%.ko*} >> "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist"
                fi
                ;;
        esac
@@ -1546,18 +1732,16 @@ instmods() {
        if (($# == 0)); then  # filenames from stdin
            while read _mod; do
                inst1mod "${_mod%.ko*}" || {
-                    if [[ "$_check" == "yes" ]]; then
-                        [[ "$_silent" == "no" ]] && dfatal "Failed to install module $_mod"
-                        return 1
+                    if [[ "$_check" == "yes" ]] && [[ "$_silent" == "no" ]]; then
+                        dfatal "Failed to install module $_mod"
                    fi
                }
            done
        fi
        while (($# > 0)); do  # filenames as arguments
            inst1mod ${1%.ko*} || {
-                if [[ "$_check" == "yes" ]]; then
-                    [[ "$_silent" == "no" ]] && dfatal "Failed to install module $1"
-                    return 1
+                if [[ "$_check" == "yes" ]] && [[ "$_silent" == "no" ]]; then
+                    dfatal "Failed to install module $1"
                fi
            }
            shift
@@ -1573,6 +1757,24 @@ instmods() {
    _ret=$?
    return $_ret
 }
+
+check_kernel_config()
+{
+    local _config_opt="$1"
+    local _config_file
+    [[ -f /boot/config-$kernel ]] \
+        && _config_file="/boot/config-$kernel"
+    [[ -f /lib/modules/$kernel/config ]] \
+        && _config_file="/lib/modules/$kernel/config"
+
+    # no kernel config file, so return true
+    [[ $_config_file ]] || return 0
+
+    grep -q -F "${_config_opt}=" "$_config_file" && return 0
+    return 1
+}
+
+
 # get_cpu_vendor
 # Only two values are returned: AMD or Intel
 get_cpu_vendor ()
@@ -1606,3 +1808,15 @@ get_ucode_file ()
        printf "%02x-%02x-%02x" ${family} ${model} ${stepping}
    fi
 }
+
+# Not every device in /dev/mapper should be examined.
+# If it is an LVM device, touch only devices which have /dev/VG/LV symlink.
+lvm_internal_dev() {
+    local dev_dm_dir=/sys/dev/block/$1/dm
+    [[ ! -f $dev_dm_dir/uuid || $(<$dev_dm_dir/uuid) != LVM-* ]] && return 1 # Not an LVM device
+    local DM_VG_NAME DM_LV_NAME DM_LV_LAYER
+    eval $(dmsetup splitname --nameprefixes --noheadings --rows "$(<$dev_dm_dir/name)" 2>/dev/null)
+    [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 0 # Better skip this!
+    [[ ${DM_LV_LAYER} ]] || [[ ! -L /dev/${DM_VG_NAME}/${DM_LV_NAME} ]]
+}
+
--- a/dracut-initramfs-restore.sh
+++ b/dracut-initramfs-restore.sh
@@ -1,11 +1,17 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 set -e

+# do some sanity checks first
+[ -e /run/initramfs/bin/sh ] && exit 0
+[ -e /run/initramfs/.need_shutdown ] || exit 0
+
 KERNEL_VERSION="$(uname -r)"

+[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
+SKIP="$dracutbasedir/skipcpio"
+[[ -x $SKIP ]] || SKIP=cat
+
 [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id

 if [[ $MACHINE_ID ]] && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
@@ -16,9 +22,11 @@ fi
 cd /run/initramfs

 [ -f .need_shutdown -a -f "$IMG" ] || exit 1
-if zcat "$IMG"  | cpio -id --quiet >/dev/null; then
+if $SKIP "$IMG" | zcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then
    rm -f -- .need_shutdown
-elif xzcat "$IMG"  | cpio -id --quiet >/dev/null; then
+elif $SKIP "$IMG" | xzcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then
+    rm -f -- .need_shutdown
+elif $SKIP "$IMG" | lz4 -d -c | cpio -id --no-absolute-filenames --quiet >/dev/null; then
    rm -f -- .need_shutdown
 else
    # something failed, so we clean up
--- a/dracut-logger.sh
+++ b/dracut-logger.sh
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 et filetype=sh
 #
 # logging faciality module for dracut both at build- and boot-time
 #
@@ -140,16 +138,25 @@ dlog_init() {
        fi
    fi

+    if (( $UID  != 0 )); then
+        kmsgloglvl=0
+        sysloglvl=0
+    fi
+
    if (( $sysloglvl > 0 )); then
-        if [[ -d /run/systemd/journal ]] && type -P systemd-cat &>/dev/null && (( $UID  == 0 )) ; then
+        if [[ -d /run/systemd/journal ]] \
+            && type -P systemd-cat &>/dev/null \
+            && systemctl --quiet is-active systemd-journald.socket &>/dev/null \
+            && { echo "dracut-$DRACUT_VERSION" | systemd-cat -t 'dracut' &>/dev/null; } ; then
            readonly _dlogdir="$(mktemp --tmpdir="$TMPDIR/" -d -t dracut-log.XXXXXX)"
            readonly _systemdcatfile="$_dlogdir/systemd-cat"
            mkfifo "$_systemdcatfile"
            readonly _dlogfd=15
-            systemd-cat -t 'dracut' <"$_systemdcatfile" &
+            systemd-cat -t 'dracut' --level-prefix=true <"$_systemdcatfile" &
            exec 15>"$_systemdcatfile"
        elif ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null; then
            # We cannot log to syslog, so turn this facility off.
+            kmsgloglvl=$sysloglvl
            sysloglvl=0
            ret=1
            errmsg="No '/dev/log' or 'logger' included for syslog logging"
@@ -321,7 +328,7 @@ _do_dlog() {

    if (( $lvl <= $sysloglvl )); then
        if [[ "$_dlogfd" ]]; then
-            echo "<$(_dlvl2syslvl $lvl)>$msg" >&$_dlogfd
+            printf -- "<%s>%s\n" "$(($(_dlvl2syslvl $lvl) & 7))" "$msg" >&$_dlogfd
        else
            logger -t "dracut[$$]" -p $(_lvl2syspri $lvl) -- "$msg"
        fi
--- a/dracut.8.asc
+++ b/dracut.8.asc
@@ -10,7 +10,7 @@ dracut - low-level tool for generating an initramfs image

 SYNOPSIS
 --------
-*dracut* ['OPTION...'] [<image> [_<kernel version>_]]
+*dracut* [__OPTION...__] [__<image>__ [__<kernel version>__]]

 DESCRIPTION
 -----------
@@ -33,57 +33,14 @@ For a complete list of kernel command line options see *dracut.cmdline*(7).
 If you are dropped to an emergency shell, while booting your initramfs,
 the file _/run/initramfs/rdsosreport.txt_ is created, which can be safed to a
 (to be mounted by hand) partition (usually /boot) or a USB stick.
-Additional debugging info can be produced by adding **rd.debug** to the kernel command line.
-_/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools.
-It should be attached to any report about dracut problems.
+Additional debugging info can be produced by adding **rd.debug** to the kernel
+command line. _/run/initramfs/rdsosreport.txt_ contains all logs and the output
+of some tools. It should be attached to any report about dracut problems.

-EXAMPLE
-------
-
-To create a initramfs image, the most simple command is:
----
-# dracut
----
-
-This will generate a general purpose initramfs image, with all possible
-functionality resulting of the combination of the installed dracut modules and
-system tools. The image is /boot/initramfs-_++<kernel version>++_.img and
-contains the kernel modules of the currently active kernel with version
-_++<kernel version>++_.
-
-If the initramfs image already exists, dracut will display an error message, and
-to overwrite the existing image, you have to use the --force option.
----
-# dracut --force
----
-
-If you want to specify another filename for the resulting image you would issue
-a command like:
----
-# dracut foobar.img
----
-
-To generate an image for a specific kernel version, the command would be:
----
-# dracut foobar.img 2.6.40-1.rc5.f20
----
-
-A shortcut to generate the image at the default location for a specific kernel
-version is:
----
-# dracut --kver 2.6.40-1.rc5.f20
----
-
-If you want to create lighter, smaller initramfs images, you may want to specify
-the --hostonly or -H option. Using this option, the resulting image will
-contain only those dracut modules, kernel modules and filesystems, which are
-needed to boot this specific machine. This has the drawback, that you can't put
-the disk on another controller or machine, and that you can't switch to another
-root filesystem, without recreating the initramfs image. The usage of the
--hostonly option is only for experts and you will have to keep the broken
-pieces. At least keep a copy of a general purpose image (and corresponding
-kernel) as a fallback to rescue your system.
+USAGE
+-----

+include::dracut.usage.asc[]

 OPTIONS
 -------
@@ -179,6 +136,19 @@ example:
 ----
 ===============================

+**--force-drivers** _<list of kernel modules>_::
+    See add-drivers above. But in this case it is ensured that the drivers
+    are tried to be loaded early via modprobe.
+
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --force-drivers "kmodule1 kmodule2"  ...
+----
+===============================
+
 **--omit-drivers** _<list of kernel modules>_::
    specify a space-separated list of kernel modules not to add to the
    initramfs.
@@ -269,6 +239,12 @@ example:
 **--nostrip**::
    do not strip binaries in the initramfs

+**--prelink**::
+    prelink binaries in the initramfs (default)
+
+**--noprelink**::
+    do not prelink binaries in the initramfs
+
 **--hardlink**::
    hardlink files in the initramfs (default)

@@ -312,6 +288,12 @@ Default:

 **--sshkey** _<sshkey file>_:: ssh key file used with ssh-client module.

+**--logfile** _<logfile>_:: logfile to use; overrides any setting from
+    the configuration files.
+
+Default:
+    _/var/log/dracut.log_
+
 **-l, --local**::
    activates the local mode. dracut will use modules from the current working
    directory instead of the system-wide installed modules in
@@ -331,7 +313,13 @@ provide a valid _/etc/fstab_.
 **-N, --no-hostonly**::
    Disable Host-Only mode

-**--persistent-policy** _<policy>_::
+**--hostonly-cmdline**:
+    Store kernel command line arguments needed in the initramfs
+
+**--no-hostonly-cmdline**:
+    Do not store kernel command line arguments needed in the initramfs
+
+**--persistent-policy** _<policy>_::
    Use _<policy>_ to address disks and partitions.
    _<policy>_ can be any directory name found in /dev/disk.
    E.g. "by-uuid", "by-label"
@@ -339,12 +327,16 @@ provide a valid _/etc/fstab_.
 **--fstab**::
    Use _/etc/fstab_ instead of _/proc/self/mountinfo_.

-**--add-fstab** _<filename>_ ::
+**--add-fstab** _<filename>_::
    Add entries of _<filename>_ to the initramfs /etc/fstab.

-**--mount** "_<device>_ _<mountpoint>_ _<filesystem type>_ _<filesystem options>_"::
-    Mount _<device>_ on _<mountpoint>_ with _<filesystem type>_ and _<filesystem
-    options>_ in the initramfs
+**--mount** "_<device>_ _<mountpoint>_ _<filesystem type>_ [_<filesystem options>_ [_<dump frequency>_ [_<fsck order>_]]]"::
+    Mount _<device>_ on _<mountpoint>_ with _<filesystem type>_ in the
+    initramfs. _<filesystem options>_, _<dump options>_ and _<fsck order>_ can
+    be specified, see fstab manpage for the details.
+    The default _<filesystem options>_ is "defaults".
+    The default _<dump frequency>_ is "0".
+    the default _<fsck order>_ is "2".

 **--add-device** _<device>_ ::
    Bring up _<device>_ in initramfs, _<device>_ should be the device name.
@@ -352,13 +344,13 @@ provide a valid _/etc/fstab_.
    LVM or an encrypted partition.
    [NB --device can be used for compatibility with earlier releases]

-**-i, --include** _<SOURCE>_ _<TARGET>_::
+**-i, --include** _<SOURCE>_ _<TARGET>_::
    include the files in the SOURCE directory into the
    TARGET directory in the final initramfs. If SOURCE is a file, it will be
    installed to TARGET in the final initramfs. This parameter can be specified
    multiple times.

-**-I, --install** _<file list>_::
+**-I, --install** _<file list>_::
    install the space separated list of files into the initramfs.
 +
 [NOTE]
@@ -370,6 +362,9 @@ example:
 ----
 ===============================

+**--install-optional** _<file list>_::
+    install the space separated list of files into the initramfs, if they exist.
+
 **--gzip**::
    Compress the generated initramfs using gzip. This will be done by default,
    unless another compression option or --no-compress is passed. Equivalent to
@@ -399,7 +394,24 @@ will not be able to boot. Equivalent to "lzma --compress=lzma -9"
 [WARNING]
 ====
 Make sure your kernel has xz decompression support compiled in, otherwise you
-will not be able to boot. Equivalent to "lzma --compress=xz --check=crc32 --lzma2=dict=1MiB"
+will not be able to boot. Equivalent to
+"lzma --compress=xz --check=crc32 --lzma2=dict=1MiB"
+====
+
+**--lzo**::
+    Compress the generated initramfs using lzop.
+[WARNING]
+====
+Make sure your kernel has lzo decompression support compiled in, otherwise you
+will not be able to boot.
+====
+
+**--lz4**::
+    Compress the generated initramfs using lz4.
+[WARNING]
+====
+Make sure your kernel has lz4 decompression support compiled in, otherwise you
+will not be able to boot.
 ====

 **--compress** _<compressor>_::
@@ -413,6 +425,9 @@ will not be able to boot. Equivalent to "lzma --compress=xz --check=crc32 --lzma
    Do not compress the generated initramfs. This will override any other
    compression options.

+**--reproducible**::
+    Create reproducible images.
+
 **--list-modules**::
    List all available dracut modules.

@@ -444,8 +459,11 @@ will not be able to boot. Equivalent to "lzma --compress=xz --check=crc32 --lzma
 ----

 **--regenerate-all**::
-    Regenerate all initramfs images at the default location with the kernel versions found on the system.
-    Additional parameters are passed through.
+    Regenerate all initramfs images at the default location with the kernel
+    versions found on the system. Additional parameters are passed through.
+
+**--loginstall _<DIR>_::
+    Log all files installed from the host to _<DIR>_.

 FILES
 -----
@@ -473,9 +491,10 @@ _/etc/conf.d/_::
    set in the configuration files.

 _/etc/cmdline_::
-    Can contain additional command line options. Deprecated, better use /etc/cmdline.d/*.conf.
+    Can contain additional command line options. Deprecated, better use
+    /etc/cmdline.d/*.conf.

-_/etc/cmdline.d/*.conf::
+_/etc/cmdline.d/*.conf_::
    Can contain additional command line options.

 AVAILABILITY
--- a/dracut.asc
+++ b/dracut.asc
@@ -1,7 +1,7 @@
 dracut
 ======
 Harald Hoyer <harald@redhat.com>
-v2.0, March 2011
+v3.0, October 2013

 :language: bash

@@ -125,12 +125,14 @@ started looks like <<dracutbootup7>>.

 == Dracut on shutdown

-On a systemd driven system, the dracut initramfs is also used for the shutdown procedure.
+On a systemd driven system, the dracut initramfs is also used for the shutdown
+procedure.

 The following steps are executed during a shutdown:

 * systemd switches to the shutdown.target
-* systemd starts /lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
+* systemd starts
+  /lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
 * dracut-shutdown.service executes /usr/lib/dracut/dracut-initramfs-restore
  which unpacks the initramfs to /run/initramfs
 * systemd finishes shutdown.target
@@ -138,875 +140,19 @@ The following steps are executed during a shutdown:
 * systemd tries to unmount everything and mounts the remaining read-only
 * systemd checks, if there is a /run/initramfs/shutdown executable
 * if yes, it does a pivot_root to /run/initramfs and executes ./shutdown.
-  The old root is then mounted on /oldroot. /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable.
-* shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules
+  The old root is then mounted on /oldroot.
+  /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable.
+* shutdown will try to umount every /oldroot mount and calls the various
+  shutdown hooks from the dracut modules

 This ensures, that all devices are disassembled and unmounted cleanly.

 = User Manual

-== Creating an initramfs Image
-To create a initramfs image, the most simple command is:
----
-# dracut
----
-
-This will generate a general purpose initramfs image, with all possible
-functionality resulting of the combination of the installed dracut modules and
-system tools. The image is /boot/initramfs-_++<kernel version>++_.img and
-contains the kernel modules of the currently active kernel with version
-_++<kernel version>++_.
-
-If the initramfs image already exists, dracut will display an error message, and
-to overwrite the existing image, you have to use the --force option.
----
-# dracut --force
----
-
-If you want to specify another filename for the resulting image you would issue
-a command like:
----
-# dracut foobar.img
----
-
-To generate an image for a specific kernel version, the command would be:
----
-# dracut foobar.img 2.6.40-1.rc5.f20
----
-
-A shortcut to generate the image at the default location for a specific kernel
-version is:
----
-# dracut --kver 2.6.40-1.rc5.f20
----
-
-If you want to create lighter, smaller initramfs images, you may want to specify
-the --host-only or -H option. Using this option, the resulting image will
-contain only those dracut modules, kernel modules and filesystems, which are
-needed to boot this specific machine. This has the drawback, that you can't put
-the disk on another controller or machine, and that you can't switch to another
-root filesystem, without recreating the initramfs image. The usage of the
--host-only option is only for experts and you will have to keep the broken
-pieces. At least keep a copy of a general purpose image (and corresponding
-kernel) as a fallback to rescue your system.
-
-=== Inspecting the Contents
-To see the contents of the image created by dracut, you can use the lsinitrd tool.
----
-# lsinitrd /boot/initramfs-$(uname -r).img | less
----
-
-To display the contents of a file in the initramfs also use the lsinitrd tool:
----
-# lsinitrd /boot/initramfs-$(uname -r).img  /etc/ld.so.conf
-include ld.so.conf.d/*.conf
----
-
-=== Adding dracut Modules
-Some dracut modules are turned off by default and have to be activated manually.
-You can do this by adding the dracut modules to the configuration file
-_/etc/dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_. See <<dracutconf5>>.
-You can also add dracut modules on the command line
-by using the -a or --add option:
----
-# dracut --add bootchart initramfs-bootchart.img
----
-
-To see a list of available dracut modules, use the --list-modules option:
----
-# dracut --list-modules
----
-
-or, if you have a dracut version earlier than +008+, issue the command:
----
-# for mod in /usr/lib/dracut/modules.d/*; do echo ${mod##*/??}; done
----
-
-=== Omitting dracut Modules
-Sometimes you don't want a dracut module to be included for reasons of speed,
-size or functionality. To do this, either specify the omit_dracutmodules
-variable in the _dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_ configuration
-file (see <<dracutconf5>>), or use the -o or --omit option
-on the command line:
----
-# dracut -o "multipath lvm" no-multipath-lvm.img
----
-
-=== Adding Kernel Modules
-If you need a special kernel module in the initramfs, which is not
-automatically picked up by dracut, you have the use the --add-drivers option
-on the command line or  the drivers vaiable in  the _/etc/dracut.conf_
-or _/etc/dracut.conf.d/myconf.conf_ configuration file (see <<dracutconf5>>):
----
-# dracut --add-drivers mymod initramfs-with-mymod.img
----
-
-== Boot parameters
-The generated initramfs.img file normally does not contain any system
-configuration files (except for some special exceptions), so the configuration
-has to be done on the kernel command line. With this flexibility, you can easily
-boot from a changed root partition, without the need to recompile the initramfs
-image. So, you could completly change your root partition (move it inside a md
-raid with encryption and LVM on top), as long as you specify the correct
-filesystem LABEL or UUID on the kernel command line for your root device, dracut
-will find it and boot from it.
-
-The kernel command line usually can be configured in _/boot/grub/grub.conf_, if
-grub is your bootloader and it also can be edited in the real boot process in
-the grub menu.
-
-The kernel command line can also be provided by the dhcp server with the
-root-path option. See <<NetworkBoot>>.
-
-For a full reference of all kernel command line parameters, see <<dracut8>>.
-
-=== Specifying the root Device
-This is the only option dracut really needs to boot from your root partition.
-Because your root partition can live in various environments, there are a lot of
-formats for the root= option. The most basic one is root=_++<path to device
-node>++_:
----
-root=/dev/sda2
----
-
-Because device node names can change, dependent on the drive ordering, you are
-encouraged to use the filesystem identifier (UUID) or filesystem label (LABEL)
-to specify your root partition:
----
-root=UUID=19e9dda3-5a38-484d-a9b0-fa6b067d0331
----
-
-or
-
----
-root=LABEL=myrootpartitionlabel
----
-
-To see all UUIDs or LABELs on your system, do:
----
-# ls -l /dev/disk/by-uuid
----
-
-or
-
----
-# ls -l /dev/disk/by-label
----
-
-If your root partition is on the network see <<NetworkBoot>>.
-
-=== Keyboard Settings
-If you have to input passwords for encrypted disk volumes, you might want to set
-the keyboard layout and specify a display font.
-
-A typical german kernel command would contain:
----
-vconsole.font=latarcyrheb-sun16 vconsole.keymap=de-latin1-nodeadkeys locale.LANG=de_DE.UTF-8
----
-
-Setting these options can override the setting stored on your system, if you use
-a modern init system, like systemd.
-
-For dracut versions prior to version +008+ the line would look like:
----
-LANG=de_DE.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=de-latin1-nodeadkeys
----
-
-=== Blacklisting Kernel Modules
-Sometimes it is required to prevent the automatic kernel module loading of a
-specific kernel module. To do this, just add rd.blacklist=_++<kernel module
-name>++_, with _++<kernel module name>++_ not containing the _.ko_
-suffix, to the kernel command line. For example:
----
-rd.driver.blacklist=mptsas rd.driver.blacklist=nouveau
----
-
-The option can be specified multiple times on the kernel command line.
-
-=== Speeding up the Boot Process
-If you want to speed up the boot process, you can specify as much information
-for dracut on the kernel command as possible. For example, you can tell dracut,
-that you root partition is not on a LVM volume or not on a raid partition, or
-that it lives inside a specific crypto LUKS encrypted volume. By default, dracut
-searches everywhere. A typical dracut kernel command line for a plain primary or
-logical partition would contain:
----
-rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0
----
-
-On systems with dracut version prior to +008+ the line would look like:
----
-rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM
----
-
-This turns off every automatic assembly of LVM, MD raids, DM raids and crypto LUKS.
-
-Of course, you could also omit the dracut modules in the initramfs creation
-process, but then you would lose the posibility to turn it on on demand.
-
-
-[[Injecting]]
-=== Injecting custom Files
-To add your own files to the initramfs image, you have several possibilities.
-
-The --include option let you specify a source path and a target path. For example
----
-# dracut --include cmdline-preset /etc/cmdline.d/mycmdline.conf initramfs-cmdline-pre.img
----
-will create an initramfs image, where the file cmdline-preset will be copied
-inside the initramfs to _/etc/cmdline.d/mycmdline.conf_. --include can only be specified once.
-
-
----
-# mkdir rd.live.overlay
-# mkdir rd.live.overlay/etc
-# mkdir rd.live.overlay/etc/conf.d
-# mkdir rd.live.overlay/etc/cmdline.d
-# echo "ip=auto" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
-# echo export FOO=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
-# echo export BAR=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
-# tree rd.live.overlay/
-rd.live.overlay/
-└── etc
-    ├── cmdline.d
-        │   └── mycmdline.conf
-	    └── conf.d
-	            └── testvar.conf
-
-# dracut --include rd.live.overlay / initramfs-rd.live.overlay.img
----
-
-This will put the contents of the rd.live.overlay directory into the root of the
-initramfs image.
-
-The --install option let you specify several files, which will get installed in
-the initramfs image at the same location, as they are present on initramfs
-creation time.
-
-
----
-# dracut --install 'strace fsck.ext3 ssh' initramfs-dbg.img
----
-
-This will create an initramfs with the strace, fsck.ext3 and ssh executables,
-together with the libraries needed to start those. The --install option can be
-specified multiple times.
-
-
-[[NetworkBoot]]
-== Network Boot
-
-If your root partition is on a network drive, you have to have the network
-dracut modules installed to create a network aware initramfs image.
-
-On a Red Hat Enterprise Linux or Fedora system, this means, you have to install
-the _dracut-network_ rpm package:
-
-
----
-# yum install dracut-network
----
-
-The resulting initramfs image can be served by a boot manager residing on your
-local hard drive or it can be served by a PXE/TFTP server.
-
-How to setup your PXE/TFTP server can be found in the
-http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
-Hat Enterprise Linux Storage Administration Guide].
-
-If you specify ip=auto on the kernel command line, then dracut asks a dhcp
-server about the ip adress for the machine. The dhcp server can also serve an
-additional root-path, which will set the root device for dracut. With this
-mechanism, you have static configuration on your client machine and a
-centralized boot configuration on your TFTP/DHCP server. If you can't pass a
-kernel command line, then you can inject _/etc/cmdline.d/mycmdline.conf_, with a method described
-in <<Injecting>>.
-
-
-
-
-=== Reducing the Image Size
-
-To reduce the size of the initramfs, you should create it with by ommitting all
-dracut modules, which you know, you don't need to boot the machine.
-
-You can also specify the exact dracut and kernel modules to produce a very tiny
-initramfs image.
-
-For example for a NFS image, you would do:
-
-
----
-# dracut -m "nfs network  base" initramfs-nfs-only.img
----
-
-Then you would boot from this image with your target machine and reduce the size
-once more by creating it on the target machine with the --host-only option:
-
-
----
-# dracut -m "nfs network base" --host-only initramfs-nfs-host-only.img
----
-
-This will reduce the size of the initramfs image significantly.
-
-
-
-=== NFS Root Device
-
-FIXME
-
-=== iSCSI Root Device
-
-FIXME 
-
-=== FCoE Root Device
-
-FIXME
-
-== Troubleshooting
-
-If the boot process does not succeed, you have several options to debug the
-situation. Some of the basic operations are covered here. For more information
-you should also visit:
-http://fedoraproject.org/wiki/How_to_debug_Dracut_problems
-
-
-[[identifying-your-problem-area]]
-=== Identifying your problem area
-. Remove ''rhgb'' and ''quiet'' from the kernel command line
-. Add ''rd.shell'' to the kernel command line. This will present a shell should
-dracut be unable to locate your root device
-. Add ''rd.shell rd.debug log_buf_len=1M'' to the kernel command line so that
-dracut shell commands are printed as they are executed
-. With dracut >= 002-11, you can inspect the rd.debug output with:
-+
----
-# less /run/initramfs/init.log
-# dmesg | less
----
-. With dracut >= 022 and systemd, you can inspect the rd.debug output with:
----
-# journalctl -ab
----
-. With dracut >= 025 the file /run/initramfs/rdsosreport.txt is generated, which contains all the logs and the output of all significant tools, which are mentioned later.
-
-If you want to save that output, simply mount /boot by hand or insert an USB stick and mount that.
-Then you can store the output for later inspection.
-
-[[information-to-include-in-your-report]]
-=== Information to include in your report
-
-[[all-bug-reports]]
-==== All bug reports
-In all cases, the following should be mentioned and attached to your bug report:
-
-* The exact kernel command-line used. Typically from the bootloader
-configuration file (e.g. _/etc/grub.conf_) or from _/proc/cmdline_.
-* A copy of your disk partition information from _/etc/fstab_, which might be
-obtained booting an old working initramfs or a rescue medium.
-* A device listing from device-mapper. This can be obtained by running the
-command
-+
----
-# dmsetup ls --tree
----
-+
-* A list of block device attributes. This can be obtained by running the commands: 
-+
----
-# blkid -p
-# blkid -p -o udev
----
-* Turn on dracut debugging (see _the 'debugging dracut' section_), and attach
-all relevant information from the boot log. This can be obtained by running the
-command 
-+
----
-# dmesg|grep dracut
----
-+
-* If you use a dracut configuration file, please include _/etc/dracut.conf_ and
-all files in _/etc/dracut.conf.d/*.conf_
-
-[[logical-volume-management-related-problems]]
-==== Logical Volume Management related problems
-As well as the information from <<all-bug-reports>> include the following
-information:
-
-* Include physical volume information by running the command:
-+
----
-# lvm pvdisplay
----
-+
-* Include volume group information by running the command:
-+
----
-# lvm vgdisplay
----
-+
-* Include logical volume information by running the command:
-+
----
-# lvm lvdisplay
----
-
-[[software-raid-related-problems]]
-==== Software RAID related problems
-As well as the information from <<all-bug-reports>>, include the following
-information:
-
-* If using software RAID disk partitions, please include the output of
-+
----
-# cat /proc/mdstat
----
-
-[[network-root-device-related-problems]]
-==== Network root device related problems
-This section details information to include when experiencing problems on a
-system whose root device is located on a network attached volume (e.g. iSCSI,
-NFS or NBD). As well as the information from <<all-bug-reports>>, include the
-following information:
-
-
-* Please include the output of
-+
----
-# /sbin/ifup <interfacename>
-# ip addr show
----
-
-[[debugging-dracut]]
-=== Debugging dracut
-
-
-[[configure-a-serial-console]]
-==== Configure a serial console
-
-Successfully debugging dracut will require some form of console
-logging during the system boot.  This section documents configuring a
-serial console connection to record boot messages.
-
-. First, enable serial console output for both the kernel and the bootloader.
-. Open the file _/etc/grub.conf_ for editing. Below the line ''timeout=5'', add
-the following:
-+
----
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
----
-+
-. Also in _/etc/grub.conf_, add the following boot arguemnts to the ''kernel''
-line:
-+
----
-console=tty0 console=ttyS0,9600
----
-+
-. When finished, the _/etc/grub.conf_ file should look similar to the example
-below.
-+
----
-default=0
-timeout=5
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-title Fedora (2.6.29.5-191.fc11.x86_64)
-  root (hd0,0)
-  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 console=ttyS0,9600
-  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
----
-+
-. More detailed information on how to configure the kernel for console output
-can be found at
-http://www.faqs.org/docs/Linux-HOWTO/Remote-Serial-Console-HOWTO.html#CONFIGURE-KERNEL.
-. Redirecting non-interactive output
-+
--
-NOTE: You can redirect all non-interactive output to _/dev/kmsg_ and the kernel
-will put it out on the console when it reaches the kernel buffer by doing
-
----
-# exec >/dev/kmsg 2>&1 </dev/console
----
--
-
-[[using-the-dracut-shell]]
-==== Using the dracut shell
-
-dracut offers a shell for interactive debugging in the event dracut fails to
-locate your root filesystem. To enable the shell:
-
-. Add the boot parameter ''rd.shell'' to your bootloader configuration file
-(e.g. _/etc/grub.conf_)
-. Remove the boot arguments ''rhgb'' and ''quiet''
-+
-A sample _/etc/grub.conf_ bootloader configuration file is listed below.
-+
----
-default=0
-timeout=5
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-title Fedora (2.6.29.5-191.fc11.x86_64)
-  root (hd0,0)
-  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 rd.shell
-  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
----
-+
-. If system boot fails, you will be dropped into a shell as seen in the example below.
-+
----
-No root device found
-Dropping to debug shell.
-
-#
----
-+
-. Use this shell prompt to gather the information requested above (see <<all-bug-reports>>).
-
-[[accessing-the-root-volume-from-the-dracut-shell]]
-==== Accessing the root volume from the dracut shell
-From the dracut debug shell, you can manually perform the task of locating and
-preparing your root volume for boot. The required steps will depend on how your
-root volume is configured. Common scenarios include:
-
-* A block device (e.g. _/dev/sda7_)
-* A LVM logical volume (e.g. _/dev/VolGroup00/LogVol00_)
-* An encrypted device (e.g. _/dev/mapper/luks-4d5972ea-901c-4584-bd75-1da802417d83_)
-* A network attached device (e.g. netroot=iscsi:@192.168.0.4::3260::iqn.2009-02.org.fedoraproject:for.all)
-
-The exact method for locating and preparing will vary. However, to continue with
-a successful boot, the objective is to locate your root volume and create a
-symlink _/dev/root_ which points to the file system. For example, the following
-example demonstrates accessing and booting a root volume that is an encrypted
-LVM Logical volume.
-
-. Inspect your partitions using parted
-+
----
-# parted /dev/sda -s p
-Model: ATA HTS541060G9AT00 (scsi)
-Disk /dev/sda: 60.0GB
-Sector size (logical/physical): 512B/512B
-Partition Table: msdos
-Number  Start   End     Size    Type      File system  Flags
-1      32.3kB  10.8GB  107MB   primary   ext4         boot
-2      10.8GB  55.6GB  44.7GB  logical                lvm
----
-+
-. You recall that your root volume was a LVM logical volume. Scan and activate
-any logical volumes.
-+
----
-# lvm vgscan
-# lvm vgchange -ay
----
-+
-. You should see any logical volumes now using the command blkid:
-+
----
-# blkid
-/dev/sda1: UUID="3de247f3-5de4-4a44-afc5-1fe179750cf7" TYPE="ext4"
-/dev/sda2: UUID="Ek4dQw-cOtq-5MJu-OGRF-xz5k-O2l8-wdDj0I" TYPE="LVM2_member"
-/dev/mapper/linux-root: UUID="def0269e-424b-4752-acf3-1077bf96ad2c" TYPE="crypto_LUKS"
-/dev/mapper/linux-home: UUID="c69127c1-f153-4ea2-b58e-4cbfa9257c5e" TYPE="ext3"
-/dev/mapper/linux-swap: UUID="47b4d329-975c-4c08-b218-f9c9bf3635f1" TYPE="swap"
----
-+
-. From the output above, you recall that your root volume exists on an encrypted
-block device. Following the guidance disk encryption guidance from the
-Installation Guide, you unlock your encrypted root volume.
-+
----
-# UUID=$(cryptsetup luksUUID /dev/mapper/linux-root)
-# cryptsetup luksOpen /dev/mapper/linux-root luks-$UUID
-Enter passphrase for /dev/mapper/linux-root:
-Key slot 0 unlocked.
----
-+
-. Next, make a symbolic link to the unlocked root volume
-+
----
-# ln -s /dev/mapper/luks-$UUID /dev/root
----
-+
-. With the root volume available, you may continue booting the system by exiting
-the dracut shell
-+
----
-# exit
----
-
-[[additional-dracut-boot-parameters]]
-==== Additional dracut boot parameters
-For more debugging options, see <<dracutkerneldebug>> in <<dracutcmdline7>>.
-
-= Developer Manual
-
-== dracut Components
-
-dracut uses a modular system to build and extend the initramfs image. All
-modules are located in _/usr/lib/dracut/modules.d_ or in _<git-src>/modules.d_.
-The most basic dracut module is _99base_. In _99base_ the initial shell script
-init is defined, which gets run by the kernel after initramfs loading. Although
-you can replace init with your own version of _99base_, this is not encouraged.
-Instead you should use, if possible, the hooks of dracut. All hooks, and the
-point of time in which they are executed, are described in <<stages>>.
-
-The main script, which creates the initramfs is dracut itsself. It parses all
-arguments and sets up the directory, in which everything is installed. It then
-executes all check, install, installkernel scripts found in the modules, which
-are to be processed. After everything is installed, the install directory is
-archived and compressed to the final initramfs image. All helper functions used
-by check, install and installkernel are found in in the file _dracut-functions_.
-These shell functions are available to all module installer (install,
-installkernel) scripts, without the need to source _dracut-functions_.
-
-A module can check the preconditions for install and installkernel with the
-check script. Also dependencies can be expressed with check. If a module passed
-check, install and installkernel will be called to install all of the necessary
-files for the module. To split between kernel and non-kernel parts of the
-installation, all kernel module related parts have to be in installkernel. All
-other files found in a module directory are module specific and mostly are hook
-scripts and udev rules.
-
-
-[[stages]]
-== Boot Process Stages
-
-dracut modules can insert custom script at various points, to control the boot
-process.
-These hooks are plain directories containing shell scripts ending with ".sh",
-which are sourced by init.
-Common used functions are in _dracut-lib.sh_, which can be sourced by any script.
-
-=== Hook: cmdline
-
-The _cmdline_ hook is a place to insert scripts to parse the kernel command line
-and prepare the later actions, like setting up udev rules and configuration
-files.
-
-In this hook the most important environment variable is defined: root. The
-second one is rootok, which indicates, that a module claimed to be able to parse
-the root defined. So for example, **root=**__iscsi:....__ will be claimed by the
-iscsi dracut module, which then sets rootok.
-
-=== Hook: pre-udev
-
-This hook is executed right after the cmdline hook and a check if root and
-rootok were set. Here modules can take action with the final root, and before
-udev has been run.
-
-=== Start Udev
-
-Now udev is started and the logging for udev is setup.
-
-=== Hook: pre-trigger
-
-In this hook, you can set udev environment variables with **udevadm control
--property=KEY=_value_** or control the further execution of udev with
-udevadm.
-
-=== Trigger Udev
-
-udev is triggered by calling udevadm trigger, which sends add events for all
-devices and subsystems.
-
-=== Main Loop
-
-In the main loop of dracut loops until udev has settled and
-all scripts in _initqueue/finished_ returned true.
-In this loop there are three hooks, where scripts can be inserted
-by calling /sbin/initqueue.
-
-==== Initqueue
-
-This hook gets executed every time a script is inserted here, regardless of the
-udev state.
-
-==== Initqueue settled
-
-This hooks (initqueue/settled) gets executed every time udev has settled.
-
-
-==== Initqueue timeout
-
-This hooks (initqueue/timeout) gets executed, when the main loop counter becomes half of the
-rd.retry counter.
-
-==== Initqueue finished
-
-This hook (initqueue/finished) is called after udev has settled and
-if all scripts herein return 0 the main loop will be ended.
-Abritary scripts can be added here, to loop in the
-initqueue until something happens, which a dracut module wants to wait for.
-
-=== Hook: pre-mount
-
-Before the root device is mounted all scripts in the hook pre-mount are
-executed. In some cases (e.g. NFS) the real root device is already mounted,
-though.
-
-=== Hook: mount
-
-This hook is mainly to mount the real root device.
-
-=== Hook: pre-pivot
-
-This hook is called before cleanup hook, This is a good place for
-actions other than cleanups which need to be called before pivot.
-
-=== Hook: cleanup
-
-This hook is the last hook and is called before init finally switches root to
-the real root device. This is a good place to clean up and kill processes not
-needed anymore.
-
-
-=== Cleanup and switch_root
-
-Init (or systemd) kills all udev processes, cleans up the environment,
-sets up the arguments for the real init process and finally calls switch_root.
-switch_root removes the whole filesystem hierarchy of the initramfs,
-chroot()s to the real root device and calls /sbin/init with the specified arguments.
-
-To ensure all files in the initramfs hierarchy can be removed, all processes
-still running from the initramfs should not have any open file descriptors left.
-
-== Network Infrastructure
-
-FIXME
-
-== Writing a Module
-
-A simple example module is _96insmodpost_, which modprobes a kernel module after
-udev has settled and the basic device drivers have been loaded.
-
-All module installation information is in the file module-setup.sh.
-
-First we create a check() function, which just exits with 0 indicating that this
-module should be included by default.
-
-check():
----
-return 0
----
-
-The we create the install() function, which installs a cmdline hook with
-priority number 20 called _parse-insmodpost.sh_. It also installs the
-_insmodpost.sh_ script in _/sbin_.
-
-install():
----
-inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
-inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
----
-
-The _pase-instmodpost.sh_ parses the kernel command line for a argument
-rd.driver.post, blacklists the module from being autoloaded and installs the
-hook _insmodpost.sh_ in the _initqueue/settled_.
-
-_parse-insmodpost.sh_:
----
-for p in $(getargs rd.driver.post=); do
-    echo "blacklist $p" >> /etc/modprobe.d/initramfsblacklist.conf
-    _do_insmodpost=1
-done
-
-[ -n "$_do_insmodpost" ] && /sbin/initqueue --settled --unique --onetime /sbin/insmodpost.sh
-unset _do_insmodpost
-
----
-
-_insmodpost.sh_, which is called in the _initqueue/settled_ hook will just
-modprobe the kernel modules specified in all rd.driver.post kernel command line
-parameters. It runs after udev has settled and is only called once (--onetime).
-
-_insmodpost.sh_:
----
-. /lib/dracut-lib.sh
-
-for p in $(getargs rd.driver.post=); do
-    modprobe $p
-done
-
----
-
-
-
-=== check()
-
-_check()_ is called by dracut to evaluate the inclusion of a dracut module in
-the initramfs.
-
-$hostonly:: If the $hostonly variable is set, then the module check() function
-should be in "hostonly" mode, which means, that the check() should only return
-0, if the module is really needed to boot this specific host.
-
-check() should return with:
-
-0:: Include the dracut module in the initramfs.
-
-1:: Do not include the dracut module. The requirements are not fullfilled
-(missing tools, etc.)
-
-255:: Only include the dracut module, if another module requires it or if
-explicitly specified in the config file or on the argument list.
-
-
-
-=== depends()
-
-The function depends() should echo all other dracut module names the module
-depends on.
-
-
-
-=== install()
-
-inst_multiple
-
-inst
-
-inst_hook
-
-inst_rules
-
-
-
-
-
-=== installkernel()
-
-instmods
-
-
-
-=== Creation Functions
-
-FIXME
-
-
-=== Initramfs Functions
-
-FIXME
-
-
-=== Network Modules
-
-FIXME
-
 :leveloffset: 1
-[[dracutbootup7]]
-include::dracut.bootup.7.asc[]
-
-:leveloffset: 1
-[[dracut8]]
 include::dracut.8.asc[]

+:leveloffset: 1
 [[dracutconf5]]
 include::dracut.conf.5.asc[]

@@ -1019,6 +165,15 @@ include::lsinitrd.1.asc[]
 [[mkinitrd8]]
 include::mkinitrd.8.asc[]

+= Developer Manual
+
+:leveloffset: 1
+[[dracutmodules7]]
+include::dracut.modules.7.asc[]
+
+[[dracutbootup7]]
+include::dracut.bootup.7.asc[]
+
 :leveloffset: 0
 [appendix]
 License
--- a/dracut.bootup.7.asc
+++ b/dracut.bootup.7.asc
@@ -11,7 +11,8 @@ dracut.bootup - boot ordering in the initramfs
 DESCRIPTION
 -----------

-This flow chart illustrates the ordering of the services, if systemd is used in the dracut initramfs.
+This flow chart illustrates the ordering of the services, if systemd is used in
+the dracut initramfs.
 ----

                                    systemd-journal.socket
--- a/dracut.cmdline.7.asc
+++ b/dracut.cmdline.7.asc
--- a/dracut.conf.5.asc
+++ b/dracut.conf.5.asc
@@ -10,17 +10,19 @@ dracut.conf - configuration file(s) for dracut

 SYNOPSIS
 --------
-_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_  _/usr/lib/dracut/dracut.conf.d/*.conf_
+_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_
+_/usr/lib/dracut/dracut.conf.d/*.conf_

 Description
 -----------
 _dracut.conf_ is loaded during the initialisation phase of dracut. Command line
 parameter will overwrite any values set here.

-_*.conf_ files are read from /usr/lib/dracut/dracut.conf.d and /etc/dracut.conf.d.
-Files with the same name in /etc/dracut.conf.d will replace files in /usr/lib/dracut/dracut.conf.d.
-The files are then read in alphanumerical order and will overwrite parameters set in
-_/etc/dracut.conf_. Each line specifies an attribute and a value. A '#'
+_*.conf_ files are read from /usr/lib/dracut/dracut.conf.d and
+/etc/dracut.conf.d. Files with the same name in /etc/dracut.conf.d will replace
+files in /usr/lib/dracut/dracut.conf.d.
+The files are then read in alphanumerical order and will overwrite parameters
+set in _/etc/dracut.conf_. Each line specifies an attribute and a value. A '#'
 indicates the beginning of a comment; following characters, up to the end of the
 line are not interpreted.

@@ -47,6 +49,10 @@ Configuration files must have the extension .conf; other extensions are ignored.
    Specify a space-separated list of kernel modules to add to the initramfs.
    The kernel modules have to be specified without the ".ko" suffix.

+*force_drivers+=*" __<list of kernel modules>__ "::
+    See add_drivers above. But in this case it is ensured that the drivers
+    are tried to be loaded early via modprobe.
+
 *omit_drivers+=*" __<kernel modules>__ "::
    Specify a space-separated list of kernel modules not to add to the
    initramfs. The kernel modules have to be specified without the ".ko" suffix.
@@ -64,13 +70,23 @@ Configuration files must have the extension .conf; other extensions are ignored.
 *install_items+=*" __<file>__[ __<file>__ ...] "::
    Specify additional files to include in the initramfs, separated by spaces.

+*install_optional_items+=*" __<file>__[ __<file>__ ...] "::
+    Specify additional files to include in the initramfs, separated by spaces,
+    if they exist.
+
 *do_strip=*"__{yes|no}__"::
    Strip binaries in the initramfs (default=yes)

+*do_prelink=*"__{yes|no}__"::
+    Prelink binaries in the initramfs (default=yes)
+
 *hostonly=*"__{yes|no}__"::
    Host-Only mode: Install only what is needed for booting the local host
    instead of a generic host and generate host-specific configuration.

+*hostonly_cmdline*"__{yes|no}__"::
+    If set, store the kernel command line arguments needed in the initramfs
+
 *persistent_policy=*"__<policy>__"::
    Use _<policy>_ to address disks and partitions.
    _<policy>_ can be any directory name found in /dev/disk.
@@ -81,7 +97,8 @@ Configuration files must have the extension .conf; other extensions are ignored.

 [WARNING]
 ====
-If chrooted to another root other than the real root device, use --fstab and provide a valid _/etc/fstab_.
+If chrooted to another root other than the real root device, use --fstab and
+provide a valid _/etc/fstab_.
 ====

 *use_fstab=*"__{yes|no}__"::
@@ -119,9 +136,24 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *kernel_only=*"__{yes|no}__"::
    Only install kernel drivers and firmware files. (default=no)

-*no_kernel=*"{yes|no}"::
+*no_kernel=*"__{yes|no}__"::
    Do not install kernel drivers and firmware files (default=no)

+*acpi_override=*"__{yes|no}__"::
+    [WARNING] ONLY USE THIS IF YOU KNOW WHAT YOU ARE DOING! +
+    Override BIOS provided ACPI tables. For further documentation read
+    Documentation/acpi/initrd_table_override.txt in the kernel sources.
+    Search for ACPI table files (must have .aml suffix) in acpi_table_dir=
+    directory (see below) and add them to a separate uncompressed cpio
+    archive. This cpio archive gets glued (concatenated, uncompressed one
+    must be the first one) to the compressed cpio archive. The first,
+    uncompressed cpio archive is for data which the kernel must be able
+    to access very early (and cannot make use of uncompress alogrithms yet)
+    like microcode or ACPI tables (default=no).
+
+*acpi_table_dir=*"__<dir>__"::
+    Directory to search for ACPI tables if acpi_override= is set to yes.
+
 *early_microcode=*"{yes|no}"::
    Combine early microcode with ramdisk (default=no)

@@ -140,6 +172,23 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *show_modules=*"__{yes|no}__"::
    Print the name of the included modules to standard output during build.

+*i18n_vars="__<variable mapping>__"::
+    Distribution specific variable mapping.
+    See dracut/modules.d/10i18n/README for a detailed description.
+
+*i18n_default_font=*"__<fontname>__"::
+    The font <fontname> to install, if not specified otherwise.
+    Default is "LatArCyrHeb-16".
+
+*i18n_install_all=*"__{yes|no}__"::
+    Install everything regardless of generic or hostonly mode.
+
+*reproducible=*"__{yes|no}__"::
+    Create reproducible images.
+
+*loginstall=*"__<DIR>__"::
+    Log all files installed from the host to _<DIR>_.
+
 Files
 -----
 _/etc/dracut.conf_::
--- a/dracut.conf.d/fedora.conf.example
+++ b/dracut.conf.d/fedora.conf.example
@@ -2,13 +2,17 @@

 # i18n
 i18n_vars="/etc/sysconfig/keyboard:KEYTABLE-KEYMAP /etc/sysconfig/i18n:SYSFONT-FONT,FONTACM-FONT_MAP,FONT_UNIMAP"
-i18n_default_font="latarcyrheb-sun16"
+i18n_default_font="eurlatgr"
+i18n_install_all="yes"
+
+
 stdloglvl=3
 sysloglvl=5
-install_items+=" vi /etc/virc ps grep cat rm "
+install_optional_items+=" vi /etc/virc ps grep cat rm "
 prefix="/"
 systemdutildir=/usr/lib/systemd
 systemdsystemunitdir=/usr/lib/systemd/system
 systemdsystemconfdir=/etc/systemd/system
 udevdir=/usr/lib/udev
 hostonly="yes"
+early_microcode="yes"
--- a/dracut.conf.d/suse.conf.example
+++ b/dracut.conf.d/suse.conf.example
@@ -1,3 +1,24 @@
+# SUSE specifc dracut settings
+#
+# SUSE by default always builds a as small as possible initrd for performance
+# and resource reasons.
+# If you like to build a generic initrd which works on other platforms than
+# on the one dracut/mkinitrd got called comment out below setting(s).
+hostonly="yes"
+hostonly_cmdline="yes"
+
+compress="xz -0 --check=crc32 --memlimit-compress=50%"
+
 i18n_vars="/etc/sysconfig/language:RC_LANG-LANG,RC_LC_ALL-LC_ALL /etc/sysconfig/console:CONSOLE_UNICODEMAP-FONT_UNIMAP,CONSOLE_FONT-FONT,CONSOLE_SCREENMAP-FONT_MAP /etc/sysconfig/keyboard:KEYTABLE-KEYMAP"
 omit_drivers+=" i2o_scsi"

+# Below adds additional tools to the initrd which are not urgently necessary to
+# bring up the system, but help to debug problems.
+# See /usr/lib/dracut/modules.d/95debug/module-setup.sh which additional tools
+# are installed and add more if you need them. This specifically helps if you
+# use:
+# rd.break=[cmdline|pre-udev|pre-trigger|initqueue|pre-mount|
+# mount|pre-pivot|cleanup]
+# boot parameter or if you are forced to enter the dracut emergency shell.
+
+# add_dracutmodules+=debug
--- a/dracut.css
+++ b/dracut.css
--- a/dracut.modules.7.asc
+++ b/dracut.modules.7.asc
@@ -0,0 +1,299 @@
+DRACUT.MODULES(7)
+=================
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+dracut.modules - dracut modules
+
+DESCRIPTION
+-----------
+
+dracut uses a modular system to build and extend the initramfs image. All
+modules are located in _/usr/lib/dracut/modules.d_ or in _<git-src>/modules.d_.
+The most basic dracut module is _99base_. In _99base_ the initial shell script
+init is defined, which gets run by the kernel after initramfs loading. Although
+you can replace init with your own version of _99base_, this is not encouraged.
+Instead you should use, if possible, the hooks of dracut. All hooks, and the
+point of time in which they are executed, are described in <<stages>>.
+
+The main script, which creates the initramfs is dracut itsself. It parses all
+arguments and sets up the directory, in which everything is installed. It then
+executes all check, install, installkernel scripts found in the modules, which
+are to be processed. After everything is installed, the install directory is
+archived and compressed to the final initramfs image. All helper functions used
+by check, install and installkernel are found in in the file _dracut-functions_.
+These shell functions are available to all module installer (install,
+installkernel) scripts, without the need to source _dracut-functions_.
+
+A module can check the preconditions for install and installkernel with the
+check script. Also dependencies can be expressed with check. If a module passed
+check, install and installkernel will be called to install all of the necessary
+files for the module. To split between kernel and non-kernel parts of the
+installation, all kernel module related parts have to be in installkernel. All
+other files found in a module directory are module specific and mostly are hook
+scripts and udev rules.
+
+
+[[stages]]
+== Boot Process Stages
+
+dracut modules can insert custom script at various points, to control the boot
+process.
+These hooks are plain directories containing shell scripts ending with ".sh",
+which are sourced by init.
+Common used functions are in _dracut-lib.sh_, which can be sourced by any script.
+
+=== Hook: cmdline
+
+The _cmdline_ hook is a place to insert scripts to parse the kernel command line
+and prepare the later actions, like setting up udev rules and configuration
+files.
+
+In this hook the most important environment variable is defined: root. The
+second one is rootok, which indicates, that a module claimed to be able to parse
+the root defined. So for example, **root=**__iscsi:....__ will be claimed by the
+iscsi dracut module, which then sets rootok.
+
+=== Hook: pre-udev
+
+This hook is executed right after the cmdline hook and a check if root and
+rootok were set. Here modules can take action with the final root, and before
+udev has been run.
+
+=== Start Udev
+
+Now udev is started and the logging for udev is setup.
+
+=== Hook: pre-trigger
+
+In this hook, you can set udev environment variables with **udevadm control
+--property=KEY=_value_** or control the further execution of udev with
+udevadm.
+
+=== Trigger Udev
+
+udev is triggered by calling udevadm trigger, which sends add events for all
+devices and subsystems.
+
+=== Main Loop
+
+In the main loop of dracut loops until udev has settled and
+all scripts in _initqueue/finished_ returned true.
+In this loop there are three hooks, where scripts can be inserted
+by calling /sbin/initqueue.
+
+==== Initqueue
+
+This hook gets executed every time a script is inserted here, regardless of the
+udev state.
+
+==== Initqueue settled
+
+This hooks (initqueue/settled) gets executed every time udev has settled.
+
+==== Initqueue timeout
+
+This hooks (initqueue/timeout) gets executed, when the main loop counter becomes
+half of the rd.retry counter.
+
+==== Initqueue finished
+
+This hook (initqueue/finished) is called after udev has settled and
+if all scripts herein return 0 the main loop will be ended.
+Abritary scripts can be added here, to loop in the
+initqueue until something happens, which a dracut module wants to wait for.
+
+=== Hook: pre-mount
+
+Before the root device is mounted all scripts in the hook pre-mount are
+executed. In some cases (e.g. NFS) the real root device is already mounted,
+though.
+
+=== Hook: mount
+
+This hook is mainly to mount the real root device.
+
+=== Hook: pre-pivot
+
+This hook is called before cleanup hook, This is a good place for
+actions other than cleanups which need to be called before pivot.
+
+=== Hook: cleanup
+
+This hook is the last hook and is called before init finally switches root to
+the real root device. This is a good place to clean up and kill processes not
+needed anymore.
+
+
+=== Cleanup and switch_root
+
+Init (or systemd) kills all udev processes, cleans up the environment,
+sets up the arguments for the real init process and finally calls switch_root.
+switch_root removes the whole filesystem hierarchy of the initramfs,
+chroot()s to the real root device and calls /sbin/init with the specified
+arguments.
+
+To ensure all files in the initramfs hierarchy can be removed, all processes
+still running from the initramfs should not have any open file descriptors left.
+
+== Network Infrastructure
+
+FIXME
+
+== Writing a Module
+
+A simple example module is _96insmodpost_, which modprobes a kernel module after
+udev has settled and the basic device drivers have been loaded.
+
+All module installation information is in the file module-setup.sh.
+
+First we create a check() function, which just exits with 0 indicating that this
+module should be included by default.
+
+check():
+----
+return 0
+----
+
+The we create the install() function, which installs a cmdline hook with
+priority number 20 called _parse-insmodpost.sh_. It also installs the
+_insmodpost.sh_ script in _/sbin_.
+
+install():
+----
+inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
+inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
+----
+
+The _pase-instmodpost.sh_ parses the kernel command line for a argument
+rd.driver.post, blacklists the module from being autoloaded and installs the
+hook _insmodpost.sh_ in the _initqueue/settled_.
+
+_parse-insmodpost.sh_:
+----
+for p in $(getargs rd.driver.post=); do
+    echo "blacklist $p" >> /etc/modprobe.d/initramfsblacklist.conf
+    _do_insmodpost=1
+done
+
+[ -n "$_do_insmodpost" ] && /sbin/initqueue --settled --unique --onetime /sbin/insmodpost.sh
+unset _do_insmodpost
+
+----
+
+_insmodpost.sh_, which is called in the _initqueue/settled_ hook will just
+modprobe the kernel modules specified in all rd.driver.post kernel command line
+parameters. It runs after udev has settled and is only called once (--onetime).
+
+_insmodpost.sh_:
+----
+. /lib/dracut-lib.sh
+
+for p in $(getargs rd.driver.post=); do
+    modprobe $p
+done
+
+----
+
+
+=== module-setup.sh: check()
+
+_check()_ is called by dracut to evaluate the inclusion of a dracut module in
+the initramfs.
+
+$hostonly:: If the $hostonly variable is set, then the module check() function
+should be in "hostonly" mode, which means, that the check() should only return
+0, if the module is really needed to boot this specific host.
+
+check() should return with:
+
+0:: Include the dracut module in the initramfs.
+
+1:: Do not include the dracut module. The requirements are not fullfilled
+(missing tools, etc.)
+
+255:: Only include the dracut module, if another module requires it or if
+explicitly specified in the config file or on the argument list.
+
+
+=== module-setup.sh: depends()
+
+The function depends() should echo all other dracut module names the module
+depends on.
+
+=== module-setup.sh: cmdline()
+
+This function should print the kernel command line options needed to boot the
+current machine setup. It should start with a space and should not print a
+newline.
+
+=== module-setup.sh: install()
+
+The install() function is called to install everything non-kernel related.
+To install binaries, scripts, and other files, you can use the functions
+mentioned in <<creation>>.
+
+To address a file in the current module directory, use the variable "$moddir".
+
+=== module-setup.sh: installkernel()
+
+In installkernel() all kernel related files should be installed. You can use all
+of the functions mentioned in <<creation>> to install files.
+
+=== [[creation]]Creation Functions
+
+==== inst_multiple [-o] <file> [ <file> ...]
+
+installs multiple binaries and files. If executables are specified without a
+path, dracut will search the path PATH=/usr/sbin:/sbin:/usr/bin:/bin for the
+binary. If the option "-o" is given as the first parameter, a missing file does
+not lead to an error.
+
+==== inst <src> [<dst>]
+
+installs _one_ file <src> either to the same place in the initramfs or to an
+optional <dst>.
+
+==== inst_hook <hookdir> <prio> <src>
+
+installs an executable/script <src> in the dracut hook <hookdir> with priority
+<prio>.
+
+==== inst_rules <udevrule> [ <udevrule> ...]
+
+installs one ore more udev rules. Non-existant udev rules are reported, but do
+not let dracut fail.
+
+==== instmods <kernelmodule> [ <kernelmodule> ... ]
+
+instmods should be used only in the installkernel() function.
+
+instmods installs one or more kernel modules in the initramfs. <kernelmodule>
+can also be a whole subsystem, if prefixed with a "=", like "=drivers/net/team".
+
+instmods will not install the kernel module, if $hostonly is set and the kernel
+module is not currently needed by any /sys/*...*/uevent MODALIAS.
+To install a kernel module regardless of the hostonly mode use the form:
+----
+hostonly='' instmods <kernelmodule>
+----
+
+=== Initramfs Functions
+
+FIXME
+
+
+=== Network Modules
+
+FIXME
+
+AUTHOR
+------
+Harald Hoyer
+
+SEE ALSO
+--------
+*dracut*(8)
--- a/dracut.sh
+++ b/dracut.sh
--- a/dracut.spec
+++ b/dracut.spec
@@ -1,4 +1,5 @@
 %define dracutlibdir %{_prefix}/lib/dracut
+%bcond_without doc

 # Variables must be defined
 %define with_nbd                1
@@ -28,7 +29,9 @@ URL: https://dracut.wiki.kernel.org/

 # Source can be generated by
 # http://git.kernel.org/?p=boot/dracut/dracut.git;a=snapshot;h=%{version};sf=tgz
-Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.bz2
+Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.xz
+Source1: https://www.gnu.org/licenses/lgpl-2.1.txt
+

 BuildRequires: bash git

@@ -45,6 +48,7 @@ BuildRequires: pkgconfig
 BuildRoot: %{_tmppath}/%{name}-%{version}-build
 %endif

+%if %{with doc}
 %if 0%{?fedora} || 0%{?rhel}
 BuildRequires: docbook-style-xsl docbook-dtds libxslt
 %endif
@@ -54,6 +58,8 @@ BuildRequires: docbook-style-xsl docbook-dtds libxslt
 %endif

 BuildRequires: asciidoc
+%endif
+

 %if 0%{?fedora} > 12 || 0%{?rhel}
 # no "provides", because dracut does not offer
@@ -97,16 +103,14 @@ Requires: util-linux >= 2.21
 Requires: systemd >= 199
 Requires: procps-ng
 Conflicts: grubby < 8.23
+Conflicts: initscripts < 8.63-1
+Conflicts: plymouth < 0.8.0-0.2009.29.09.19.1
+Conflicts: bcache-tools < 0-0.14.20130909git
 %else
 Requires: udev > 166
 Requires: util-linux-ng >= 2.21
 %endif

-%if 0%{?fedora} || 0%{?rhel} > 6
-Conflicts: initscripts < 8.63-1
-Conflicts: plymouth < 0.8.0-0.2009.29.09.19.1
-%endif
-
 Conflicts: mdadm < 3.2.6-14

 %description
@@ -192,6 +196,7 @@ This package contains tools to assemble the local initrd and host configuration.

 %prep
 %setup -q -n %{name}-%{version}
+cp %{SOURCE1} .

 %if %{defined PATCH1}
 git init
@@ -205,7 +210,10 @@ git am -p1 %{patches}
 %endif

 %build
-%configure --systemdsystemunitdir=%{_unitdir} --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) --libdir=%{_prefix}/lib
+%configure --systemdsystemunitdir=%{_unitdir} --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) --libdir=%{_prefix}/lib \
+%if %{without doc}
+     --disable-documentation
+%endif

 make %{?_smp_mflags}

@@ -248,15 +256,18 @@ mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/log
 touch $RPM_BUILD_ROOT%{_localstatedir}/log/dracut.log
 mkdir -p $RPM_BUILD_ROOT%{_sharedstatedir}/initramfs

-%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
+%if 0%{?fedora} || 0%{?rhel}
 install -m 0644 dracut.conf.d/fedora.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
-install -m 0644 dracut.conf.d/fips.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/40-fips.conf
+rm -f $RPM_BUILD_ROOT%{_mandir}/man?/*suse*
 %endif
-
 %if 0%{?suse_version}
 install -m 0644 dracut.conf.d/suse.conf.example   $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
 %endif

+%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
+install -m 0644 dracut.conf.d/fips.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/40-fips.conf
+%endif
+
 %if 0%{?fedora} <= 12 && 0%{?rhel} < 6 && 0%{?suse_version} <= 9999
 rm -f -- $RPM_BUILD_ROOT%{_bindir}/mkinitrd
 rm -f -- $RPM_BUILD_ROOT%{_bindir}/lsinitrd
@@ -271,19 +282,27 @@ echo 'hostonly="no"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-generic-i
 echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-rescue.conf
 %endif

+%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
+> $RPM_BUILD_ROOT/etc/system-fips
+%endif
+
 # create compat symlink
-mkdir -p $RPM_BUILD_ROOT/sbin
-ln -s /usr/bin/dracut $RPM_BUILD_ROOT/sbin/dracut
+mkdir -p $RPM_BUILD_ROOT%{_sbindir}
+ln -sr $RPM_BUILD_ROOT%{_bindir}/dracut $RPM_BUILD_ROOT%{_sbindir}/dracut

 %clean
 rm -rf -- $RPM_BUILD_ROOT

 %files
 %defattr(-,root,root,0755)
-%doc README HACKING TODO COPYING AUTHORS NEWS dracut.html dracut.png dracut.svg
+%if %{with doc}
+%doc README HACKING TODO AUTHORS NEWS dracut.html dracut.png dracut.svg
+%endif
+%{!?_licensedir:%global license %%doc}
+%license COPYING lgpl-2.1.txt
 %{_bindir}/dracut
 # compat symlink
-/sbin/dracut
+%{_sbindir}/dracut
 %{_datadir}/bash-completion/completions/dracut
 %{_datadir}/bash-completion/completions/lsinitrd
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
@@ -298,12 +317,15 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/dracut-logger.sh
 %{dracutlibdir}/dracut-initramfs-restore
 %{dracutlibdir}/dracut-install
+%{dracutlibdir}/skipcpio
 %config(noreplace) %{_sysconfdir}/dracut.conf
 %if 0%{?fedora} || 0%{?suse_version} || 0%{?rhel}
 %{dracutlibdir}/dracut.conf.d/01-dist.conf
 %endif
 %dir %{_sysconfdir}/dracut.conf.d
 %dir %{dracutlibdir}/dracut.conf.d
+
+%if %{with doc}
 %{_mandir}/man8/dracut.8*
 %{_mandir}/man8/*service.8*
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
@@ -312,8 +334,11 @@ rm -rf -- $RPM_BUILD_ROOT
 %endif
 %{_mandir}/man7/dracut.kernel.7*
 %{_mandir}/man7/dracut.cmdline.7*
+%{_mandir}/man7/dracut.modules.7*
 %{_mandir}/man7/dracut.bootup.7*
 %{_mandir}/man5/dracut.conf.5*
+%endif
+
 %if %{defined _unitdir}
 %{dracutlibdir}/modules.d/00systemd-bootchart
 %else
@@ -330,7 +355,6 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/50drm
 %{dracutlibdir}/modules.d/50plymouth
 %{dracutlibdir}/modules.d/80cms
-%{dracutlibdir}/modules.d/90bcache
 %{dracutlibdir}/modules.d/90btrfs
 %{dracutlibdir}/modules.d/90crypt
 %{dracutlibdir}/modules.d/90dm
@@ -348,8 +372,10 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/95rootfs-block
 %{dracutlibdir}/modules.d/95dasd
 %{dracutlibdir}/modules.d/95dasd_mod
+%{dracutlibdir}/modules.d/95dasd_rules
 %{dracutlibdir}/modules.d/95fstab-sys
 %{dracutlibdir}/modules.d/95zfcp
+%{dracutlibdir}/modules.d/95zfcp_rules
 %{dracutlibdir}/modules.d/95terminfo
 %{dracutlibdir}/modules.d/95udev-rules
 %{dracutlibdir}/modules.d/95virtfs
@@ -373,7 +399,7 @@ rm -rf -- $RPM_BUILD_ROOT
 %dir %{_sharedstatedir}/initramfs
 %if %{defined _unitdir}
 %{_unitdir}/dracut-shutdown.service
-%{_unitdir}/shutdown.target.wants/dracut-shutdown.service
+%{_unitdir}/sysinit.target.wants/dracut-shutdown.service
 %{_unitdir}/dracut-cmdline.service
 %{_unitdir}/dracut-initqueue.service
 %{_unitdir}/dracut-mount.service
@@ -407,17 +433,19 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/95ssh-client
 %{dracutlibdir}/modules.d/45ifcfg
 %{dracutlibdir}/modules.d/95znet
+%{dracutlibdir}/modules.d/95fcoe-uefi
+%{dracutlibdir}/modules.d/99uefi-lib

 %if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
 %files fips
 %defattr(-,root,root,0755)
 %{dracutlibdir}/modules.d/01fips
 %{dracutlibdir}/dracut.conf.d/40-fips.conf
+%config(missingok) /etc/system-fips
 %endif

 %files fips-aesni
 %defattr(-,root,root,0755)
-%doc COPYING
 %{dracutlibdir}/modules.d/02fips-aesni

 %files caps
@@ -426,7 +454,11 @@ rm -rf -- $RPM_BUILD_ROOT

 %files tools
 %defattr(-,root,root,0755)
-%{_mandir}/man8/dracut-catimages.8*
+
+%if %{with doc}
+%doc %{_mandir}/man8/dracut-catimages.8*
+%endif
+
 %{_bindir}/dracut-catimages
 %dir /boot/dracut
 %dir /var/lib/dracut
--- a/dracut.usage.asc
+++ b/dracut.usage.asc
@@ -0,0 +1,522 @@
+To create a initramfs image, the most simple command is:
+----
+# dracut
+----
+
+This will generate a general purpose initramfs image, with all possible
+functionality resulting of the combination of the installed dracut modules and
+system tools. The image is /boot/initramfs-_++<kernel version>++_.img and
+contains the kernel modules of the currently active kernel with version
+_++<kernel version>++_.
+
+If the initramfs image already exists, dracut will display an error message, and
+to overwrite the existing image, you have to use the --force option.
+----
+# dracut --force
+----
+
+If you want to specify another filename for the resulting image you would issue
+a command like:
+----
+# dracut foobar.img
+----
+
+To generate an image for a specific kernel version, the command would be:
+----
+# dracut foobar.img 2.6.40-1.rc5.f20
+----
+
+A shortcut to generate the image at the default location for a specific kernel
+version is:
+----
+# dracut --kver 2.6.40-1.rc5.f20
+----
+
+If you want to create lighter, smaller initramfs images, you may want to specify
+the --hostonly or -H option. Using this option, the resulting image will
+contain only those dracut modules, kernel modules and filesystems, which are
+needed to boot this specific machine. This has the drawback, that you can't put
+the disk on another controller or machine, and that you can't switch to another
+root filesystem, without recreating the initramfs image. The usage of the
+--hostonly option is only for experts and you will have to keep the broken
+pieces. At least keep a copy of a general purpose image (and corresponding
+kernel) as a fallback to rescue your system.
+
+=== Inspecting the Contents
+To see the contents of the image created by dracut, you can use the lsinitrd
+tool.
+----
+# lsinitrd | less
+----
+
+To display the contents of a file in the initramfs also use the lsinitrd tool:
+----
+# lsinitrd -f /etc/ld.so.conf
+include ld.so.conf.d/*.conf
+----
+
+=== Adding dracut Modules
+Some dracut modules are turned off by default and have to be activated manually.
+You can do this by adding the dracut modules to the configuration file
+_/etc/dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_. See *dracut.conf*(5).
+You can also add dracut modules on the command line
+by using the -a or --add option:
+----
+# dracut --add bootchart initramfs-bootchart.img
+----
+
+To see a list of available dracut modules, use the --list-modules option:
+----
+# dracut --list-modules
+----
+
+=== Omitting dracut Modules
+Sometimes you don't want a dracut module to be included for reasons of speed,
+size or functionality. To do this, either specify the omit_dracutmodules
+variable in the _dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_ configuration
+file (see *dracut.conf*(5)), or use the -o or --omit option
+on the command line:
+----
+# dracut -o "multipath lvm" no-multipath-lvm.img
+----
+
+=== Adding Kernel Modules
+If you need a special kernel module in the initramfs, which is not
+automatically picked up by dracut, you have the use the --add-drivers option
+on the command line or  the drivers vaiable in  the _/etc/dracut.conf_
+or _/etc/dracut.conf.d/myconf.conf_ configuration file (see *dracut.conf*(5)):
+----
+# dracut --add-drivers mymod initramfs-with-mymod.img
+----
+
+=== Boot parameters
+An initramfs generated without the "hostonly" mode, does not contain any system
+configuration files (except for some special exceptions), so the configuration
+has to be done on the kernel command line. With this flexibility, you can easily
+boot from a changed root partition, without the need to recompile the initramfs
+image. So, you could completly change your root partition (move it inside a md
+raid with encryption and LVM on top), as long as you specify the correct
+filesystem LABEL or UUID on the kernel command line for your root device, dracut
+will find it and boot from it.
+
+The kernel command line usually can be configured in _/boot/grub/grub.conf_ or
+_/boot/grub2/grub.cfg_, if grub is your bootloader and it also can be edited in
+the real boot process in the grub menu.
+
+The kernel command line can also be provided by the dhcp server with the
+root-path option. See <<NetworkBoot>>.
+
+For a full reference of all kernel command line parameters,
+see *dracut.cmdline*(5).
+
+To get a quick start for the suitable kernel command line on your system,
+use the __--print-cmdline__ option:
+----
+# dracut --print-cmdline
+ root=UUID=8b8b6f91-95c7-4da2-831b-171e12179081 rootflags=rw,relatime,discard,data=ordered rootfstype=ext4
+----
+
+==== Specifying the root Device
+This is the only option dracut really needs to boot from your root partition.
+Because your root partition can live in various environments, there are a lot of
+formats for the root= option. The most basic one is root=_++<path to device
+node>++_:
+----
+root=/dev/sda2
+----
+
+Because device node names can change, dependent on the drive ordering, you are
+encouraged to use the filesystem identifier (UUID) or filesystem label (LABEL)
+to specify your root partition:
+----
+root=UUID=19e9dda3-5a38-484d-a9b0-fa6b067d0331
+----
+
+or
+
+----
+root=LABEL=myrootpartitionlabel
+----
+
+To see all UUIDs or LABELs on your system, do:
+----
+# ls -l /dev/disk/by-uuid
+----
+
+or
+
+----
+# ls -l /dev/disk/by-label
+----
+
+If your root partition is on the network see <<NetworkBoot>>.
+
+==== Keyboard Settings
+If you have to input passwords for encrypted disk volumes, you might want to set
+the keyboard layout and specify a display font.
+
+A typical german kernel command would contain:
+----
+rd.vconsole.font=latarcyrheb-sun16 rd.vconsole.keymap=de-latin1-nodeadkeys rd.locale.LANG=de_DE.UTF-8
+----
+
+Setting these options can override the setting stored on your system, if you use
+a modern init system, like systemd.
+
+==== Blacklisting Kernel Modules
+Sometimes it is required to prevent the automatic kernel module loading of a
+specific kernel module. To do this, just add rd.blacklist=_++<kernel module
+name>++_, with _++<kernel module name>++_ not containing the _.ko_
+suffix, to the kernel command line. For example:
+----
+rd.driver.blacklist=mptsas rd.driver.blacklist=nouveau
+----
+
+The option can be specified multiple times on the kernel command line.
+
+==== Speeding up the Boot Process
+If you want to speed up the boot process, you can specify as much information
+for dracut on the kernel command as possible. For example, you can tell dracut,
+that you root partition is not on a LVM volume or not on a raid partition, or
+that it lives inside a specific crypto LUKS encrypted volume. By default, dracut
+searches everywhere. A typical dracut kernel command line for a plain primary or
+logical partition would contain:
+----
+rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0
+----
+
+This turns off every automatic assembly of LVM, MD raids, DM raids and
+crypto LUKS.
+
+Of course, you could also omit the dracut modules in the initramfs creation
+process, but then you would lose the posibility to turn it on on demand.
+
+
+[[Injecting]]
+=== Injecting custom Files
+To add your own files to the initramfs image, you have several possibilities.
+
+The --include option let you specify a source path and a target path.
+For example
+----
+# dracut --include cmdline-preset /etc/cmdline.d/mycmdline.conf initramfs-cmdline-pre.img
+----
+will create an initramfs image, where the file cmdline-preset will be copied
+inside the initramfs to _/etc/cmdline.d/mycmdline.conf_. --include can only
+be specified once.
+
+
+----
+# mkdir -p rd.live.overlay/etc/cmdline.d
+# mkdir -p rd.live.overlay/etc/conf.d
+# echo "ip=dhcp" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
+# echo export FOO=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
+# echo export BAR=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
+# tree rd.live.overlay/
+rd.live.overlay/
+`-- etc
+    |-- cmdline.d
+    |   `-- mycmdline.conf
+    `-- conf.d
+        `-- testvar.conf
+
+# dracut --include rd.live.overlay / initramfs-rd.live.overlay.img
+----
+
+This will put the contents of the rd.live.overlay directory into the root of the
+initramfs image.
+
+The --install option let you specify several files, which will get installed in
+the initramfs image at the same location, as they are present on initramfs
+creation time.
+
+
+----
+# dracut --install 'strace fsck.ext3 ssh' initramfs-dbg.img
+----
+
+This will create an initramfs with the strace, fsck.ext3 and ssh executables,
+together with the libraries needed to start those. The --install option can be
+specified multiple times.
+
+
+[[NetworkBoot]]
+=== Network Boot
+
+If your root partition is on a network drive, you have to have the network
+dracut modules installed to create a network aware initramfs image.
+
+If you specify ip=dhcp on the kernel command line, then dracut asks a dhcp
+server about the ip adress for the machine. The dhcp server can also serve an
+additional root-path, which will set the root device for dracut. With this
+mechanism, you have static configuration on your client machine and a
+centralized boot configuration on your TFTP/DHCP server. If you can't pass a
+kernel command line, then you can inject _/etc/cmdline.d/mycmdline.conf_, with a
+method described in <<Injecting>>.
+
+==== Reducing the Image Size
+
+To reduce the size of the initramfs, you should create it with by ommitting all
+dracut modules, which you know, you don't need to boot the machine.
+
+You can also specify the exact dracut and kernel modules to produce a very tiny
+initramfs image.
+
+For example for a NFS image, you would do:
+
+
+----
+# dracut -m "nfs network  base" initramfs-nfs-only.img
+----
+
+Then you would boot from this image with your target machine and reduce the size
+once more by creating it on the target machine with the --host-only option:
+
+
+----
+# dracut -m "nfs network base" --host-only initramfs-nfs-host-only.img
+----
+
+This will reduce the size of the initramfs image significantly.
+
+
+== Troubleshooting
+
+If the boot process does not succeed, you have several options to debug the
+situation. Some of the basic operations are covered here. For more information
+you should also visit:
+https://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html
+
+
+[[identifying-your-problem-area]]
+=== Identifying your problem area
+. Remove ''rhgb'' and ''quiet'' from the kernel command line
+. Add ''rd.shell'' to the kernel command line. This will present a shell should
+dracut be unable to locate your root device
+. Add ''rd.shell rd.debug log_buf_len=1M'' to the kernel command line so that
+dracut shell commands are printed as they are executed
+. The file /run/initramfs/rdsosreport.txt is generated,
+which contains all the logs and the output of all significant tools, which are
+mentioned later.
+
+If you want to save that output, simply mount /boot by hand or insert an USB
+stick and mount that. Then you can store the output for later inspection.
+
+[[information-to-include-in-your-report]]
+=== Information to include in your report
+
+[[all-bug-reports]]
+==== All bug reports
+In all cases, the following should be mentioned and attached to your bug report:
+
+* The exact kernel command-line used. Typically from the bootloader
+configuration file (e.g. _/etc/grub.conf_) or from _/proc/cmdline_.
+* A copy of your disk partition information from _/etc/fstab_, which might be
+obtained booting an old working initramfs or a rescue medium.
+* Turn on dracut debugging (see _the 'debugging dracut' section_), and attach
+the file /run/initramfs/rdsosreport.txt.
+* If you use a dracut configuration file, please include _/etc/dracut.conf_ and
+all files in _/etc/dracut.conf.d/*.conf_
+
+[[network-root-device-related-problems]]
+==== Network root device related problems
+This section details information to include when experiencing problems on a
+system whose root device is located on a network attached volume (e.g. iSCSI,
+NFS or NBD). As well as the information from <<all-bug-reports>>, include the
+following information:
+
+
+* Please include the output of
+
+----
+# /sbin/ifup <interfacename>
+# ip addr show
+----
+
+[[debugging-dracut]]
+=== Debugging dracut
+
+
+[[configure-a-serial-console]]
+==== Configure a serial console
+
+Successfully debugging dracut will require some form of console
+logging during the system boot.  This section documents configuring a
+serial console connection to record boot messages.
+
+. First, enable serial console output for both the kernel and the bootloader.
+. Open the file _/etc/grub.conf_ for editing. Below the line ''timeout=5'', add
+the following:
+
+----
+serial --unit=0 --speed=9600
+terminal --timeout=5 serial console
+----
+
+. Also in _/etc/grub.conf_, add the following boot arguemnts to the ''kernel''
+line:
+
+----
+console=tty0 console=ttyS0,9600
+----
+
+. When finished, the _/etc/grub.conf_ file should look similar to the example
+below.
+
+----
+default=0
+timeout=5
+serial --unit=0 --speed=9600
+terminal --timeout=5 serial console
+title Fedora (2.6.29.5-191.fc11.x86_64)
+  root (hd0,0)
+  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 console=ttyS0,9600
+  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
+----
+
+. More detailed information on how to configure the kernel for console output
+can be found at
+http://www.faqs.org/docs/Linux-HOWTO/Remote-Serial-Console-HOWTO.html#CONFIGURE-KERNEL.
+. Redirecting non-interactive output
+
+--
+NOTE: You can redirect all non-interactive output to _/dev/kmsg_ and the kernel
+will put it out on the console when it reaches the kernel buffer by doing
+
+----
+# exec >/dev/kmsg 2>&1 </dev/console
+----
+--
+
+[[using-the-dracut-shell]]
+==== Using the dracut shell
+
+dracut offers a shell for interactive debugging in the event dracut fails to
+locate your root filesystem. To enable the shell:
+
+. Add the boot parameter ''rd.shell'' to your bootloader configuration file
+(e.g. _/etc/grub.conf_)
+. Remove the boot arguments ''rhgb'' and ''quiet''
+
+A sample _/etc/grub.conf_ bootloader configuration file is listed below.
+
+----
+default=0
+timeout=5
+serial --unit=0 --speed=9600
+terminal --timeout=5 serial console
+title Fedora (2.6.29.5-191.fc11.x86_64)
+  root (hd0,0)
+  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 rd.shell
+  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
+----
+
+. If system boot fails, you will be dropped into a shell as seen in the example
+below.
+
+----
+No root device found
+Dropping to debug shell.
+
+#
+----
+
+. Use this shell prompt to gather the information requested above
+(see <<all-bug-reports>>).
+
+[[accessing-the-root-volume-from-the-dracut-shell]]
+==== Accessing the root volume from the dracut shell
+From the dracut debug shell, you can manually perform the task of locating and
+preparing your root volume for boot. The required steps will depend on how your
+root volume is configured. Common scenarios include:
+
+* A block device (e.g. _/dev/sda7_)
+* A LVM logical volume (e.g. _/dev/VolGroup00/LogVol00_)
+* An encrypted device
+  (e.g. _/dev/mapper/luks-4d5972ea-901c-4584-bd75-1da802417d83_)
+* A network attached device
+  (e.g. _netroot=iscsi:@192.168.0.4::3260::iqn.2009-02.org.example:for.all_)
+
+The exact method for locating and preparing will vary. However, to continue with
+a successful boot, the objective is to locate your root volume and create a
+symlink _/dev/root_ which points to the file system. For example, the following
+example demonstrates accessing and booting a root volume that is an encrypted
+LVM Logical volume.
+
+. Inspect your partitions using parted
+
+----
+# parted /dev/sda -s p
+Model: ATA HTS541060G9AT00 (scsi)
+Disk /dev/sda: 60.0GB
+Sector size (logical/physical): 512B/512B
+Partition Table: msdos
+Number  Start   End     Size    Type      File system  Flags
+1      32.3kB  10.8GB  107MB   primary   ext4         boot
+2      10.8GB  55.6GB  44.7GB  logical                lvm
+----
+
+. You recall that your root volume was a LVM logical volume. Scan and activate
+any logical volumes.
+
+----
+# lvm vgscan
+# lvm vgchange -ay
+----
+
+. You should see any logical volumes now using the command blkid:
+
+----
+# blkid
+/dev/sda1: UUID="3de247f3-5de4-4a44-afc5-1fe179750cf7" TYPE="ext4"
+/dev/sda2: UUID="Ek4dQw-cOtq-5MJu-OGRF-xz5k-O2l8-wdDj0I" TYPE="LVM2_member"
+/dev/mapper/linux-root: UUID="def0269e-424b-4752-acf3-1077bf96ad2c" TYPE="crypto_LUKS"
+/dev/mapper/linux-home: UUID="c69127c1-f153-4ea2-b58e-4cbfa9257c5e" TYPE="ext3"
+/dev/mapper/linux-swap: UUID="47b4d329-975c-4c08-b218-f9c9bf3635f1" TYPE="swap"
+----
+
+. From the output above, you recall that your root volume exists on an encrypted
+block device. Following the guidance disk encryption guidance from the
+Installation Guide, you unlock your encrypted root volume.
+
+----
+# UUID=$(cryptsetup luksUUID /dev/mapper/linux-root)
+# cryptsetup luksOpen /dev/mapper/linux-root luks-$UUID
+Enter passphrase for /dev/mapper/linux-root:
+Key slot 0 unlocked.
+----
+
+. Next, make a symbolic link to the unlocked root volume
+
+----
+# ln -s /dev/mapper/luks-$UUID /dev/root
+----
+
+. With the root volume available, you may continue booting the system by exiting
+the dracut shell
+
+----
+# exit
+----
+
+[[additional-dracut-boot-parameters]]
+==== Additional dracut boot parameters
+For more debugging options, see *dracut.cmdline*(7).
+
+
+[[debugging-dracut-on-shutdown]]
+==== Debugging dracut on shutdown
+
+To debug the shutdown sequence on systemd systems, you can _rd.break_
+on _pre-shutdown_ or _shutdown_.
+
+To do this from an already booted system:
+----
+# mkdir -p /run/initramfs/etc/cmdline.d
+# echo "rd.debug rd.break=pre-shutdown rd.break=shutdown" > /run/initramfs/etc/cmdline.d/debug.conf
+# touch /run/initramfs/.need_shutdown
+----
+
+This will give you a dracut shell after the system pivot'ed back in the
+initramfs.
+
--- a/install/.kateconfig
+++ b/install/.kateconfig
@@ -0,0 +1 @@
+kate: space-indent on; tab-width 8; indent-width 8; replace-tabs on; eol unix;
--- a/install/dracut-install.c
+++ b/install/dracut-install.c
@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /* dracut-install.c  -- install files and executables

   Copyright (C) 2012 Harald Hoyer
@@ -44,6 +42,7 @@
 #include "log.h"
 #include "hashmap.h"
 #include "util.h"
+#include "strv.h"

 static bool arg_hmac = false;
 static bool arg_createdir = false;
@@ -52,8 +51,11 @@ static bool arg_optional = false;
 static bool arg_all = false;
 static bool arg_resolvelazy = false;
 static bool arg_resolvedeps = false;
+static bool arg_hostonly = false;
 static char *destrootdir = NULL;
-
+static char *logdir = NULL;
+static char *logfile = NULL;
+FILE *logfile_f = NULL;
 static Hashmap *items = NULL;
 static Hashmap *items_failed = NULL;

@@ -63,12 +65,12 @@ static size_t dir_len(char const *file)
 {
        size_t length;

-        if(!file)
+        if (!file)
                return 0;

        /* Strip the basename and any redundant slashes before it.  */
-        for (length = strlen(file)-1; 0 < length; length--)
-                if (file[length] == '/' && file[length-1] != '/')
+        for (length = strlen(file) - 1; 0 < length; length--)
+                if (file[length] == '/' && file[length - 1] != '/')
                        break;
        return length;
 }
@@ -101,9 +103,9 @@ static char *convert_abs_rel(const char *from, const char *target)
        /* dir_len() skips double /'s e.g. //lib64, so we can't skip just one
         * character - need to skip all leading /'s */
        rl = strlen(target);
-        for (i = dirlen+1; i < rl; ++i)
-            if (target_dir_p[i] != '/')
-                break;
+        for (i = dirlen + 1; i < rl; ++i)
+                if (target_dir_p[i] != '/')
+                        break;
        ret = asprintf(&realtarget, "%s/%s", realpath_p, &target_dir_p[i]);
        if (ret < 0) {
                log_error("Out of memory!");
@@ -220,7 +222,8 @@ static int cp(const char *src, const char *dst)
                if (ret == 0) {
                        struct timeval tv[2];
                        if (fchown(dest_desc, sb.st_uid, sb.st_gid) != 0)
-                                fchown(dest_desc, (__uid_t)-1, sb.st_gid);
+                                if(fchown(dest_desc, (__uid_t) - 1, sb.st_gid) != 0)
+                                    log_error("Failed to chown %s: %m", dst);
                        tv[0].tv_sec = sb.st_atime;
                        tv[0].tv_usec = 0;
                        tv[1].tv_sec = sb.st_mtime;
@@ -239,14 +242,16 @@ static int cp(const char *src, const char *dst)
 normal_copy:
        pid = fork();
        if (pid == 0) {
-                execlp("cp", "cp", "--reflink=auto", "--sparse=auto", "--preserve=mode,timestamps", "-fL", src, dst, NULL);
+                execlp("cp", "cp", "--reflink=auto", "--sparse=auto", "--preserve=mode,timestamps", "-fL", src, dst,
+                       NULL);
                _exit(EXIT_FAILURE);
        }

        while (waitpid(pid, &ret, 0) < 0) {
                if (errno != EINTR) {
                        ret = -1;
-                        log_error("Failed: cp --reflink=auto --sparse=auto --preserve=mode,timestamps -fL %s %s", src, dst);
+                        log_error("Failed: cp --reflink=auto --sparse=auto --preserve=mode,timestamps -fL %s %s", src,
+                                  dst);
                        break;
                }
        }
@@ -286,7 +291,7 @@ static int library_install(const char *src, const char *lib)
           libc.so.6 (libc6,64bit, hwcap: 0x0000001000000000, OS ABI: Linux 2.6.32) => /lib64/power6/libc.so.6
           libc.so.6 (libc6,64bit, hwcap: 0x0000000000000200, OS ABI: Linux 2.6.32) => /lib64/power6x/libc.so.6
           libc.so.6 (libc6,64bit, OS ABI: Linux 2.6.32) => /lib64/libc.so.6
-        */
+         */

        free(p);
        p = strdup(lib);
@@ -324,18 +329,25 @@ static int resolve_deps(const char *src)
 {
        int ret = 0;

-        _cleanup_free_ char *buf = malloc(LINE_MAX);
+        _cleanup_free_ char *buf = NULL;
        size_t linesize = LINE_MAX;
        _cleanup_pclose_ FILE *fptr = NULL;
        _cleanup_free_ char *cmd = NULL;

+	buf = malloc(LINE_MAX);
+	if (buf == NULL)
+		return -errno;
+
        if (strstr(src, ".so") == 0) {
                _cleanup_close_ int fd = -1;
                fd = open(src, O_RDONLY | O_CLOEXEC);
                if (fd < 0)
                        return -errno;

-                read(fd, buf, LINE_MAX);
+                ret = read(fd, buf, LINE_MAX);
+                if (ret == -1)
+                        return -errno;
+
                buf[LINE_MAX - 1] = '\0';
                if (buf[0] == '#' && buf[1] == '!') {
                        /* we have a shebang */
@@ -363,7 +375,7 @@ static int resolve_deps(const char *src)
        fptr = popen(cmd, "r");

        while (!feof(fptr)) {
-                char *p, *q;
+                char *p;

                if (getline(&buf, &linesize, fptr) <= 0)
                        continue;
@@ -372,7 +384,7 @@ static int resolve_deps(const char *src)

                if (strstr(buf, "you do not have execution permission")) {
                        log_error("%s", buf);
-                        ret+=1;
+                        ret += 1;
                        break;
                }

@@ -391,8 +403,14 @@ static int resolve_deps(const char *src)
                if (strstr(buf, destrootdir))
                        break;

-                p = strchr(buf, '/');
+                p = strstr(buf, "=>");
+                if (!p)
+                        p = buf;
+
+                p = strchr(p, '/');
                if (p) {
+                        char *q;
+
                        for (q = p; *q && *q != ' ' && *q != '\n'; q++) ;
                        *q = '\0';

@@ -421,7 +439,7 @@ static int hmac_install(const char *src, const char *dst, const char *hmacpath)
        if (endswith(src, ".hmac"))
                return 0;

-	if (!hmacpath) {
+        if (!hmacpath) {
                hmac_install(src, dst, "/lib/fipscheck");
                hmac_install(src, dst, "/lib64/fipscheck");
                hmac_install(src, dst, "/lib/hmaccalc");
@@ -460,6 +478,36 @@ static int hmac_install(const char *src, const char *dst, const char *hmacpath)
        return 0;
 }

+void mark_hostonly(const char *path)
+{
+        _cleanup_free_ char *fulldstpath = NULL;
+        _cleanup_fclose_ FILE *f = NULL;
+        int ret;
+
+        ret = asprintf(&fulldstpath, "%s/lib/dracut/hostonly-files", destrootdir);
+        if (ret < 0) {
+                log_error("Out of memory!");
+                exit(EXIT_FAILURE);
+        }
+
+        f = fopen(fulldstpath, "a");
+
+        if (f == NULL) {
+                log_error("Could not open '%s' for writing.", fulldstpath);
+                return;
+        }
+
+        fprintf(f, "%s\n", path);
+}
+
+void dracut_log_cp(const char *path)
+{
+        int ret;
+        ret = fprintf(logfile_f, "%s\n", path);
+        if (ret < 0)
+                log_error("Could not append '%s' to logfile '%s': %m", path, logfile);
+}
+
 static int dracut_install(const char *src, const char *dst, bool isdir, bool resolvedeps, bool hashdst)
 {
        struct stat sb, db;
@@ -621,7 +669,13 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res

        log_debug("dracut_install ret = %d", ret);
        log_info("cp '%s' '%s'", src, fulldstpath);
+
+        if (arg_hostonly)
+                mark_hostonly(dst);
+
        ret += cp(src, fulldstpath);
+        if (ret == 0 && logfile_f)
+                dracut_log_cp(src);

        log_debug("dracut_install ret = %d", ret);

@@ -635,8 +689,8 @@ static void item_free(char *i)
 }

 static void usage(int status)
-{        
-             /*                                                                     */
+{
+        /*                                                                     */
        printf("Usage: %s -D DESTROOTDIR [OPTION]... -a SOURCE...\n"
               "or: %s -D DESTROOTDIR [OPTION]... SOURCE DEST\n"
               "\n"
@@ -647,6 +701,7 @@ static void usage(int status)
               "  -o --optional       If SOURCE does not exist, do not fail\n"
               "  -d --dir            SOURCE is a directory\n"
               "  -l --ldd            Also install shebang executables and libraries\n"
+               "  -L --logdir <DIR>   Log files, which were installed from the host to <DIR>\n"
               "  -R --resolvelazy    Only install shebang executables and libraries\n"
               "                      for all SOURCE files\n"
               "  -H --fips           Also install all '.SOURCE.hmac' files\n"
@@ -676,8 +731,8 @@ static void usage(int status)
               "        |-- libdl.so -> libdl-2.15.90.so\n"
               "        |-- libdl.so.2 -> libdl-2.15.90.so\n"
               "        |-- libtinfo.so.5 -> libtinfo.so.5.9\n"
-               "        `-- libtinfo.so.5.9\n"
-               , program_invocation_short_name, program_invocation_short_name, program_invocation_short_name);
+               "        `-- libtinfo.so.5.9\n", program_invocation_short_name, program_invocation_short_name,
+               program_invocation_short_name);
        exit(status);
 }

@@ -699,13 +754,15 @@ static int parse_argv(int argc, char *argv[])
                {"ldd", no_argument, NULL, 'l'},
                {"resolvelazy", no_argument, NULL, 'R'},
                {"optional", no_argument, NULL, 'o'},
+                {"hostonly", no_argument, NULL, 'H'},
                {"all", no_argument, NULL, 'a'},
-                {"fips", no_argument, NULL, 'H'},
+                {"fips", no_argument, NULL, 'f'},
                {"destrootdir", required_argument, NULL, 'D'},
+                {"logdir", required_argument, NULL, 'L'},
                {NULL, 0, NULL, 0}
        };

-        while ((c = getopt_long(argc, argv, "adhloD:HR", options, NULL)) != -1) {
+        while ((c = getopt_long(argc, argv, "adfhlL:oD:HR", options, NULL)) != -1) {
                switch (c) {
                case ARG_VERSION:
                        puts(PROGRAM_VERSION_STRING);
@@ -734,9 +791,15 @@ static int parse_argv(int argc, char *argv[])
                case 'D':
                        destrootdir = strdup(optarg);
                        break;
-                case 'H':
+                case 'L':
+                        logdir = strdup(optarg);
+                        break;
+                case 'f':
                        arg_hmac = true;
                        break;
+                case 'H':
+                        arg_hostonly = true;
+                        break;
                case 'h':
                        usage(EXIT_SUCCESS);
                        break;
@@ -784,13 +847,13 @@ static int resolve_lazy(int argc, char **argv)
        return ret;
 }

-static char *find_binary(const char *src)
+static char **find_binary(const char *src)
 {
-        _cleanup_free_ char *path = NULL;
-        char *p, *q;
-        bool end = false;
+        char *path = NULL;
+        _cleanup_strv_free_ char **p = NULL;
+        char **ret = NULL;
+        char **q;
        char *newsrc = NULL;
-        int ret;

        path = getenv("PATH");

@@ -798,34 +861,21 @@ static char *find_binary(const char *src)
                log_error("PATH is not set");
                exit(EXIT_FAILURE);
        }
-        path = strdup(path);
-        p = path;
-
-        if (path == NULL) {
-                log_error("Out of memory!");
-                exit(EXIT_FAILURE);
-        }

        log_debug("PATH=%s", path);

-        do {
+        p = strv_split(path, ":");
+
+        STRV_FOREACH(q, p) {
                struct stat sb;
+                int r;

-                for (q = p; *q && *q != ':'; q++) ;
-
-                if (*q == '\0')
-                        end = true;
-                else
-                        *q = '\0';
-
-                ret = asprintf(&newsrc, "%s/%s", p, src);
-                if (ret < 0) {
+                r = asprintf(&newsrc, "%s/%s", *q, src);
+                if (r < 0) {
                        log_error("Out of memory!");
                        exit(EXIT_FAILURE);
                }

-                p = q + 1;
-
                if (stat(newsrc, &sb) != 0) {
                        log_debug("stat(%s) != 0", newsrc);
                        free(newsrc);
@@ -833,30 +883,37 @@ static char *find_binary(const char *src)
                        continue;
                }

-                end = true;
+                strv_push(&ret, newsrc);

-        } while (!end);
+        };

-        if (newsrc)
-                log_debug("find_binary(%s) == %s", src, newsrc);
+        if (ret) {
+                STRV_FOREACH(q, ret) {
+                        log_debug("find_binary(%s) == %s", src, *q);
+                }
+        }

-        return newsrc;
+        return ret;
 }

 static int install_one(const char *src, const char *dst)
 {
        int r = EXIT_SUCCESS;
-        int ret;
+        int ret = 0;

        if (strchr(src, '/') == NULL) {
-                char *newsrc = find_binary(src);
-                if (newsrc) {
-                        log_debug("dracut_install '%s' '%s'", newsrc, dst);
-                        ret = dracut_install(newsrc, dst, arg_createdir, arg_resolvedeps, true);
-                        if (ret == 0) {
-                                log_debug("dracut_install '%s' '%s' OK", newsrc, dst);
+                char **p = find_binary(src);
+                if (p) {
+			char **q = NULL;
+                        STRV_FOREACH(q, p) {
+                                char *newsrc = *q;
+                                log_debug("dracut_install '%s' '%s'", newsrc, dst);
+                                ret = dracut_install(newsrc, dst, arg_createdir, arg_resolvedeps, true);
+                                if (ret == 0) {
+                                        log_debug("dracut_install '%s' '%s' OK", newsrc, dst);
+                                }
                        }
-                        free(newsrc);
+                        strv_free(p);
                } else {
                        ret = -1;
                }
@@ -877,17 +934,22 @@ static int install_all(int argc, char **argv)
        int r = EXIT_SUCCESS;
        int i;
        for (i = 0; i < argc; i++) {
-                int ret;
+                int ret = 0;
                log_debug("Handle '%s'", argv[i]);

                if (strchr(argv[i], '/') == NULL) {
-                        _cleanup_free_ char *newsrc = find_binary(argv[i]);
-                        if (newsrc) {
-                                log_debug("dracut_install '%s'", newsrc);
-                                ret = dracut_install(newsrc, newsrc, arg_createdir, arg_resolvedeps, true);
-                                if (ret == 0) {
-                                        log_debug("dracut_install '%s' OK", newsrc);
+                        char **p = find_binary(argv[i]);
+                        if (p) {
+				char **q = NULL;
+                                STRV_FOREACH(q, p) {
+                                        char *newsrc = *q;
+                                        log_debug("dracut_install '%s'", newsrc);
+                                        ret = dracut_install(newsrc, newsrc, arg_createdir, arg_resolvedeps, true);
+                                        if (ret == 0) {
+                                                log_debug("dracut_install '%s' OK", newsrc);
+                                        }
                                }
+                                strv_free(p);
                        } else {
                                ret = -1;
                        }
@@ -956,6 +1018,23 @@ int main(int argc, char **argv)
                goto finish;
        }

+        if (logdir) {
+                int ret;
+
+                ret = asprintf(&logfile, "%s/%d.log", logdir, getpid());
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
+
+                logfile_f = fopen(logfile, "a");
+                if (logfile_f == NULL) {
+                        log_error("Could not open %s for logging: %m", logfile);
+                        r = EXIT_FAILURE;
+                        goto finish;
+                }
+        }
+
        r = EXIT_SUCCESS;

        if (((optind + 1) < argc) && (strcmp(argv[optind + 1], destrootdir) == 0)) {
@@ -984,6 +1063,8 @@ int main(int argc, char **argv)
                r = EXIT_SUCCESS;

 finish:
+        if (logfile_f)
+                fclose(logfile_f);

        while ((i = hashmap_steal_first(items)))
                item_free(i);
--- a/install/hashmap.c
+++ b/install/hashmap.c
@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
  This file is part of systemd.

--- a/install/hashmap.h
+++ b/install/hashmap.h
@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef foohashmaphfoo
 #define foohashmaphfoo

--- a/install/log.c
+++ b/install/log.c
@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
  This file is part of systemd.

@@ -103,11 +101,10 @@ void log_set_facility(int facility) {
 static int write_to_console(
                int level,
                const char*file,
-                int line,
+                unsigned int line,
                const char *func,
                const char *buffer) {

-        char location[64];
        struct iovec iovec[5];
        unsigned n = 0;

@@ -119,7 +116,9 @@ static int write_to_console(
        IOVEC_SET_STRING(iovec[n++], "dracut-install: ");

        if (show_location) {
-                snprintf(location, sizeof(location), "(%s:%u) ", file, line);
+                char location[64];
+                if (snprintf(location, sizeof(location), "(%s:%u) ", file, line) <= 0)
+                        return -errno;
                IOVEC_SET_STRING(iovec[n++], location);
        }

--- a/install/log.h
+++ b/install/log.h
@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef foologhfoo
 #define foologhfoo

--- a/install/macro.h
+++ b/install/macro.h
@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #pragma once

 /***
@@ -207,7 +205,7 @@ static inline size_t IOVEC_INCREMENT(struct iovec *i, unsigned n, size_t k) {
        for (j = 0; j < n; j++) {
                size_t sub;

-                if (_unlikely_(k <= 0))
+                if (_unlikely_(k == 0))
                        break;

                sub = MIN(i[j].iov_len, k);
--- a/install/strv.c
+++ b/install/strv.c
@@ -0,0 +1,585 @@
+/***
+  This file is part of systemd.
+
+  Copyright 2010 Lennart Poettering
+
+  systemd is free software; you can redistribute it and/or modify it
+  under the terms of the GNU Lesser General Public License as published by
+  the Free Software Foundation; either version 2.1 of the License, or
+  (at your option) any later version.
+
+  systemd is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public License
+  along with systemd; If not, see <http://www.gnu.org/licenses/>.
+***/
+
+#include <assert.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <errno.h>
+
+#include "util.h"
+#include "strv.h"
+
+char *strv_find(char **l, const char *name) {
+        char **i;
+
+        assert(name);
+
+        STRV_FOREACH(i, l)
+                if (streq(*i, name))
+                        return *i;
+
+        return NULL;
+}
+
+char *strv_find_prefix(char **l, const char *name) {
+        char **i;
+
+        assert(name);
+
+        STRV_FOREACH(i, l)
+                if (startswith(*i, name))
+                        return *i;
+
+        return NULL;
+}
+
+void strv_free(char **l) {
+        char **k;
+
+        if (!l)
+                return;
+
+        for (k = l; *k; k++)
+                free(*k);
+
+        free(l);
+}
+
+char **strv_copy(char * const *l) {
+        char **r, **k;
+
+        k = r = new(char*, strv_length(l) + 1);
+        if (!r)
+                return NULL;
+
+        if (l)
+                for (; *l; k++, l++) {
+                        *k = strdup(*l);
+                        if (!*k) {
+                                strv_free(r);
+                                return NULL;
+                        }
+                }
+
+        *k = NULL;
+        return r;
+}
+
+unsigned int strv_length(char * const *l) {
+        unsigned n = 0;
+
+        if (!l)
+                return 0;
+
+        for (; *l; l++)
+                n++;
+
+        return n;
+}
+
+char **strv_new_ap(const char *x, va_list ap) {
+        const char *s;
+        char **a;
+        unsigned n = 0, i = 0;
+        va_list aq;
+
+        /* As a special trick we ignore all listed strings that equal
+         * (const char*) -1. This is supposed to be used with the
+         * STRV_IFNOTNULL() macro to include possibly NULL strings in
+         * the string list. */
+
+        if (x) {
+                n = x == (const char*) -1 ? 0 : 1;
+
+                va_copy(aq, ap);
+                while ((s = va_arg(aq, const char*))) {
+                        if (s == (const char*) -1)
+                                continue;
+
+                        n++;
+                }
+
+                va_end(aq);
+        }
+
+        a = new(char*, n+1);
+        if (!a)
+                return NULL;
+
+        if (x) {
+                if (x != (const char*) -1) {
+                        a[i] = strdup(x);
+                        if (!a[i])
+                                goto fail;
+                        i++;
+                }
+
+                while ((s = va_arg(ap, const char*))) {
+
+                        if (s == (const char*) -1)
+                                continue;
+
+                        a[i] = strdup(s);
+                        if (!a[i])
+                                goto fail;
+
+                        i++;
+                }
+        }
+
+        a[i] = NULL;
+
+        return a;
+
+fail:
+        strv_free(a);
+        return NULL;
+}
+
+char **strv_new(const char *x, ...) {
+        char **r;
+        va_list ap;
+
+        va_start(ap, x);
+        r = strv_new_ap(x, ap);
+        va_end(ap);
+
+        return r;
+}
+
+char **strv_merge(char **a, char **b) {
+        char **r, **k;
+
+        if (!a)
+                return strv_copy(b);
+
+        if (!b)
+                return strv_copy(a);
+
+        r = new(char*, strv_length(a) + strv_length(b) + 1);
+        if (!r)
+                return NULL;
+
+        for (k = r; *a; k++, a++) {
+                *k = strdup(*a);
+                if (!*k)
+                        goto fail;
+        }
+
+        for (; *b; k++, b++) {
+                *k = strdup(*b);
+                if (!*k)
+                        goto fail;
+        }
+
+        *k = NULL;
+        return r;
+
+fail:
+        strv_free(r);
+        return NULL;
+}
+
+char **strv_merge_concat(char **a, char **b, const char *suffix) {
+        char **r, **k;
+
+        /* Like strv_merge(), but appends suffix to all strings in b, before adding */
+
+        if (!b)
+                return strv_copy(a);
+
+        r = new(char*, strv_length(a) + strv_length(b) + 1);
+        if (!r)
+                return NULL;
+
+        k = r;
+        if (a)
+                for (; *a; k++, a++) {
+                        *k = strdup(*a);
+                        if (!*k)
+                                goto fail;
+                }
+
+        for (; *b; k++, b++) {
+                *k = strappend(*b, suffix);
+                if (!*k)
+                        goto fail;
+        }
+
+        *k = NULL;
+        return r;
+
+fail:
+        strv_free(r);
+        return NULL;
+
+}
+
+char **strv_split(const char *s, const char *separator) {
+        char *state;
+        char *w;
+        size_t l;
+        unsigned n, i;
+        char **r;
+
+        assert(s);
+
+        n = 0;
+        FOREACH_WORD_SEPARATOR(w, l, s, separator, state)
+                n++;
+
+        r = new(char*, n+1);
+        if (!r)
+                return NULL;
+
+        i = 0;
+        FOREACH_WORD_SEPARATOR(w, l, s, separator, state) {
+                r[i] = strndup(w, l);
+                if (!r[i]) {
+                        strv_free(r);
+                        return NULL;
+                }
+
+                i++;
+        }
+
+        r[i] = NULL;
+        return r;
+}
+
+char **strv_split_quoted(const char *s) {
+        char *state;
+        char *w;
+        size_t l;
+        unsigned n, i;
+        char **r;
+
+        assert(s);
+
+        n = 0;
+        FOREACH_WORD_QUOTED(w, l, s, state)
+                n++;
+
+        r = new(char*, n+1);
+        if (!r)
+                return NULL;
+
+        i = 0;
+        FOREACH_WORD_QUOTED(w, l, s, state) {
+                r[i] = cunescape_length(w, l);
+                if (!r[i]) {
+                        strv_free(r);
+                        return NULL;
+                }
+                i++;
+        }
+
+        r[i] = NULL;
+        return r;
+}
+
+char **strv_split_newlines(const char *s) {
+        char **l;
+        unsigned int n;
+
+        assert(s);
+
+        /* Special version of strv_split() that splits on newlines and
+         * suppresses an empty string at the end */
+
+        l = strv_split(s, NEWLINE);
+        if (!l)
+                return NULL;
+
+        n = strv_length(l);
+        if (n == 0)
+                return l;
+
+        if (isempty(l[n-1])) {
+                free(l[n-1]);
+                l[n-1] = NULL;
+        }
+
+        return l;
+}
+
+char *strv_join(char **l, const char *separator) {
+        char *r, *e;
+        char **s;
+        size_t n, k;
+
+        if (!separator)
+                separator = " ";
+
+        k = strlen(separator);
+
+        n = 0;
+        STRV_FOREACH(s, l) {
+                if (n != 0)
+                        n += k;
+                n += strlen(*s);
+        }
+
+        r = new(char, n+1);
+        if (!r)
+                return NULL;
+
+        e = r;
+        STRV_FOREACH(s, l) {
+                if (e != r)
+                        e = stpcpy(e, separator);
+
+                e = stpcpy(e, *s);
+        }
+
+        *e = 0;
+
+        return r;
+}
+
+char **strv_append(char **l, const char *s) {
+        char **r, **k;
+
+        if (!l)
+                return strv_new(s, NULL);
+
+        if (!s)
+                return strv_copy(l);
+
+        r = new(char*, strv_length(l)+2);
+        if (!r)
+                return NULL;
+
+        for (k = r; *l; k++, l++) {
+                *k = strdup(*l);
+                if (!*k)
+                        goto fail;
+        }
+
+        k[0] = strdup(s);
+        if (!k[0])
+                goto fail;
+
+        k[1] = NULL;
+        return r;
+
+fail:
+        strv_free(r);
+        return NULL;
+}
+
+int strv_push(char ***l, char *value) {
+        char **c;
+        unsigned n;
+
+        if (!value)
+                return 0;
+
+        n = strv_length(*l);
+        c = realloc(*l, sizeof(char*) * (n + 2));
+        if (!c)
+                return -ENOMEM;
+
+        c[n] = value;
+        c[n+1] = NULL;
+
+        *l = c;
+        return 0;
+}
+
+int strv_extend(char ***l, const char *value) {
+        char *v;
+        int r;
+
+        if (!value)
+                return 0;
+
+        v = strdup(value);
+        if (!v)
+                return -ENOMEM;
+
+        r = strv_push(l, v);
+        if (r < 0)
+                free(v);
+
+        return r;
+}
+
+char **strv_uniq(char **l) {
+        char **i;
+
+        /* Drops duplicate entries. The first identical string will be
+         * kept, the others dropped */
+
+        STRV_FOREACH(i, l)
+                strv_remove(i+1, *i);
+
+        return l;
+}
+
+char **strv_remove(char **l, const char *s) {
+        char **f, **t;
+
+        if (!l)
+                return NULL;
+
+        assert(s);
+
+        /* Drops every occurrence of s in the string list, edits
+         * in-place. */
+
+        for (f = t = l; *f; f++) {
+
+                if (streq(*f, s)) {
+                        free(*f);
+                        continue;
+                }
+
+                *(t++) = *f;
+        }
+
+        *t = NULL;
+        return l;
+}
+
+char **strv_remove_prefix(char **l, const char *s) {
+        char **f, **t;
+
+        if (!l)
+                return NULL;
+
+        assert(s);
+
+        /* Drops every occurrence of a string prefixed with s in the
+         * string list, edits in-place. */
+
+        for (f = t = l; *f; f++) {
+
+                if (startswith(*f, s)) {
+                        free(*f);
+                        continue;
+                }
+
+                *(t++) = *f;
+        }
+
+        *t = NULL;
+        return l;
+}
+
+char **strv_parse_nulstr(const char *s, size_t l) {
+        const char *p;
+        unsigned c = 0, i = 0;
+        char **v;
+
+        assert(s || l == 0);
+
+        if (l == 0)
+                return new0(char*, 1);
+
+        for (p = s; p < s + l; p++)
+                if (*p == 0)
+                        c++;
+
+        if (s[l-1] != 0)
+                c++;
+
+        v = new0(char*, c+1);
+        if (!v)
+                return NULL;
+
+        p = s;
+        while (p < s + l) {
+                const char *e;
+
+                e = memchr(p, 0, s + l - p);
+
+                v[i] = strndup(p, e ? e - p : s + l - p);
+                if (!v[i]) {
+                        strv_free(v);
+                        return NULL;
+                }
+
+                i++;
+
+                if (!e)
+                        break;
+
+                p = e + 1;
+        }
+
+        assert(i == c);
+
+        return v;
+}
+
+char **strv_split_nulstr(const char *s) {
+        const char *i;
+        char **r = NULL;
+
+        NULSTR_FOREACH(i, s)
+                if (strv_extend(&r, i) < 0) {
+                        strv_free(r);
+                        return NULL;
+                }
+
+        if (!r)
+                return strv_new(NULL, NULL);
+
+        return r;
+}
+
+bool strv_overlap(char **a, char **b) {
+        char **i, **j;
+
+        STRV_FOREACH(i, a) {
+                STRV_FOREACH(j, b) {
+                        if (streq(*i, *j))
+                                return true;
+                }
+        }
+
+        return false;
+}
+
+static int str_compare(const void *_a, const void *_b) {
+        const char **a = (const char**) _a, **b = (const char**) _b;
+
+        return strcmp(*a, *b);
+}
+
+char **strv_sort(char **l) {
+
+        if (strv_isempty(l))
+                return l;
+
+        qsort(l, strv_length(l), sizeof(char*), str_compare);
+        return l;
+}
+
+void strv_print(char **l) {
+        char **s;
+
+        if (!l)
+                return;
+
+        STRV_FOREACH(s, l)
+                puts(*s);
+}
--- a/install/strv.h
+++ b/install/strv.h
@@ -0,0 +1,116 @@
+#pragma once
+
+/***
+  This file is part of systemd.
+
+  Copyright 2010 Lennart Poettering
+
+  systemd is free software; you can redistribute it and/or modify it
+  under the terms of the GNU Lesser General Public License as published by
+  the Free Software Foundation; either version 2.1 of the License, or
+  (at your option) any later version.
+
+  systemd is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public License
+  along with systemd; If not, see <http://www.gnu.org/licenses/>.
+***/
+
+#include <stdarg.h>
+#include <stdbool.h>
+
+#include "util.h"
+
+char *strv_find(char **l, const char *name) _pure_;
+char *strv_find_prefix(char **l, const char *name) _pure_;
+
+void strv_free(char **l);
+DEFINE_TRIVIAL_CLEANUP_FUNC(char**, strv_free);
+#define _cleanup_strv_free_ _cleanup_(strv_freep)
+
+char **strv_copy(char * const *l);
+unsigned int strv_length(char * const *l) _pure_;
+
+char **strv_merge(char **a, char **b);
+char **strv_merge_concat(char **a, char **b, const char *suffix);
+char **strv_append(char **l, const char *s);
+int strv_extend(char ***l, const char *value);
+int strv_push(char ***l, char *value);
+
+char **strv_remove(char **l, const char *s);
+char **strv_remove_prefix(char **l, const char *s);
+char **strv_uniq(char **l);
+
+#define strv_contains(l, s) (!!strv_find((l), (s)))
+
+char **strv_new(const char *x, ...) _sentinel_;
+char **strv_new_ap(const char *x, va_list ap);
+
+static inline const char* STRV_IFNOTNULL(const char *x) {
+        return x ? x : (const char *) -1;
+}
+
+static inline bool strv_isempty(char * const *l) {
+        return !l || !*l;
+}
+
+char **strv_split(const char *s, const char *separator);
+char **strv_split_quoted(const char *s);
+char **strv_split_newlines(const char *s);
+
+char *strv_join(char **l, const char *separator);
+
+char **strv_parse_nulstr(const char *s, size_t l);
+char **strv_split_nulstr(const char *s);
+
+bool strv_overlap(char **a, char **b) _pure_;
+
+#define STRV_FOREACH(s, l)                      \
+        for ((s) = (l); (s) && *(s); (s)++)
+
+#define STRV_FOREACH_BACKWARDS(s, l)            \
+        STRV_FOREACH(s, l)                      \
+                ;                               \
+        for ((s)--; (l) && ((s) >= (l)); (s)--)
+
+#define STRV_FOREACH_PAIR(x, y, l)               \
+        for ((x) = (l), (y) = (x+1); (x) && *(x) && *(y); (x) += 2, (y) = (x + 1))
+
+char **strv_sort(char **l);
+void strv_print(char **l);
+
+#define STRV_MAKE(...) ((char**) ((const char*[]) { __VA_ARGS__, NULL }))
+
+#define STRV_MAKE_EMPTY ((char*[1]) { NULL })
+
+#define strv_from_stdarg_alloca(first)                          \
+        ({                                                      \
+                char **_l;                                      \
+                                                                \
+                if (!first)                                     \
+                        _l = (char**) &first;                   \
+                else {                                          \
+                        unsigned _n;                            \
+                        va_list _ap;                            \
+                                                                \
+                        _n = 1;                                 \
+                        va_start(_ap, first);                   \
+                        while (va_arg(_ap, char*))              \
+                                _n++;                           \
+                        va_end(_ap);                            \
+                                                                \
+                        _l = newa(char*, _n+1);                 \
+                        _l[_n = 0] = (char*) first;             \
+                        va_start(_ap, first);                   \
+                        for (;;) {                              \
+                                _l[++_n] = va_arg(_ap, char*);  \
+                                if (!_l[_n])                    \
+                                        break;                  \
+                        }                                       \
+                        va_end(_ap);                            \
+                }                                               \
+                _l;                                             \
+        })
--- a/install/util.c
+++ b/install/util.c
@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
  This file is part of systemd.

@@ -224,7 +222,7 @@ char *strappend(const char *s, const char *suffix) {
 char *strjoin(const char *x, ...) {
        va_list ap;
        size_t l;
-        char *r, *p;
+        char *r;

        va_start(ap, x);

@@ -257,6 +255,8 @@ char *strjoin(const char *x, ...) {
                return NULL;

        if (x) {
+                char *p;
+
                p = stpcpy(r, x);

                va_start(ap, x);
@@ -277,3 +277,238 @@ char *strjoin(const char *x, ...) {

        return r;
 }
+
+char *cunescape_length_with_prefix(const char *s, size_t length, const char *prefix) {
+        char *r, *t;
+        const char *f;
+        size_t pl;
+
+        assert(s);
+
+        /* Undoes C style string escaping, and optionally prefixes it. */
+
+        pl = prefix ? strlen(prefix) : 0;
+
+        r = new(char, pl+length+1);
+        if (!r)
+                return r;
+
+        if (prefix)
+                memcpy(r, prefix, pl);
+
+        for (f = s, t = r + pl; f < s + length; f++) {
+
+                if (*f != '\\') {
+                        *(t++) = *f;
+                        continue;
+                }
+
+                f++;
+
+                switch (*f) {
+
+                case 'a':
+                        *(t++) = '\a';
+                        break;
+                case 'b':
+                        *(t++) = '\b';
+                        break;
+                case 'f':
+                        *(t++) = '\f';
+                        break;
+                case 'n':
+                        *(t++) = '\n';
+                        break;
+                case 'r':
+                        *(t++) = '\r';
+                        break;
+                case 't':
+                        *(t++) = '\t';
+                        break;
+                case 'v':
+                        *(t++) = '\v';
+                        break;
+                case '\\':
+                        *(t++) = '\\';
+                        break;
+                case '"':
+                        *(t++) = '"';
+                        break;
+                case '\'':
+                        *(t++) = '\'';
+                        break;
+
+                case 's':
+                        /* This is an extension of the XDG syntax files */
+                        *(t++) = ' ';
+                        break;
+
+                case 'x': {
+                        /* hexadecimal encoding */
+                        int a, b;
+
+                        a = unhexchar(f[1]);
+                        b = unhexchar(f[2]);
+
+                        if (a < 0 || b < 0) {
+                                /* Invalid escape code, let's take it literal then */
+                                *(t++) = '\\';
+                                *(t++) = 'x';
+                        } else {
+                                *(t++) = (char) ((a << 4) | b);
+                                f += 2;
+                        }
+
+                        break;
+                }
+
+                case '0':
+                case '1':
+                case '2':
+                case '3':
+                case '4':
+                case '5':
+                case '6':
+                case '7': {
+                        /* octal encoding */
+                        int a, b, c;
+
+                        a = unoctchar(f[0]);
+                        b = unoctchar(f[1]);
+                        c = unoctchar(f[2]);
+
+                        if (a < 0 || b < 0 || c < 0) {
+                                /* Invalid escape code, let's take it literal then */
+                                *(t++) = '\\';
+                                *(t++) = f[0];
+                        } else {
+                                *(t++) = (char) ((a << 6) | (b << 3) | c);
+                                f += 2;
+                        }
+
+                        break;
+                }
+
+                case 0:
+                        /* premature end of string.*/
+                        *(t++) = '\\';
+                        goto finish;
+
+                default:
+                        /* Invalid escape code, let's take it literal then */
+                        *(t++) = '\\';
+                        *(t++) = *f;
+                        break;
+                }
+        }
+
+finish:
+        *t = 0;
+        return r;
+}
+
+char *cunescape_length(const char *s, size_t length) {
+        return cunescape_length_with_prefix(s, length, NULL);
+}
+
+
+/* Split a string into words, but consider strings enclosed in '' and
+ * "" as words even if they include spaces. */
+char *split_quoted(const char *c, size_t *l, char **state) {
+        const char *current, *e;
+        bool escaped = false;
+
+        assert(c);
+        assert(l);
+        assert(state);
+
+        current = *state ? *state : c;
+
+        current += strspn(current, WHITESPACE);
+
+        if (*current == 0)
+                return NULL;
+
+        else if (*current == '\'') {
+                current ++;
+
+                for (e = current; *e; e++) {
+                        if (escaped)
+                                escaped = false;
+                        else if (*e == '\\')
+                                escaped = true;
+                        else if (*e == '\'')
+                                break;
+                }
+
+                *l = e-current;
+                *state = (char*) (*e == 0 ? e : e+1);
+
+        } else if (*current == '\"') {
+                current ++;
+
+                for (e = current; *e; e++) {
+                        if (escaped)
+                                escaped = false;
+                        else if (*e == '\\')
+                                escaped = true;
+                        else if (*e == '\"')
+                                break;
+                }
+
+                *l = e-current;
+                *state = (char*) (*e == 0 ? e : e+1);
+
+        } else {
+                for (e = current; *e; e++) {
+                        if (escaped)
+                                escaped = false;
+                        else if (*e == '\\')
+                                escaped = true;
+                        else if (strchr(WHITESPACE, *e))
+                                break;
+                }
+                *l = e-current;
+                *state = (char*) e;
+        }
+
+        return (char*) current;
+}
+
+/* Split a string into words. */
+char *split(const char *c, size_t *l, const char *separator, char **state) {
+        char *current;
+
+        current = *state ? *state : (char*) c;
+
+        if (!*current || *c == 0)
+                return NULL;
+
+        current += strspn(current, separator);
+        *l = strcspn(current, separator);
+        *state = current+*l;
+
+        return (char*) current;
+}
+
+int unhexchar(char c) {
+
+        if (c >= '0' && c <= '9')
+                return c - '0';
+
+        if (c >= 'a' && c <= 'f')
+                return c - 'a' + 10;
+
+        if (c >= 'A' && c <= 'F')
+                return c - 'A' + 10;
+
+        return -1;
+}
+
+int unoctchar(char c) {
+
+        if (c >= '0' && c <= '7')
+                return c - '0';
+
+        return -1;
+}
--- a/install/util.h
+++ b/install/util.h
@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef fooutilhfoo
 #define fooutilhfoo

@@ -134,8 +132,16 @@ static inline bool isempty(const char *p) {
        return !p || !p[0];
 }

+
+static inline const char *startswith(const char *s, const char *prefix) {
+        if (strncmp(s, prefix, strlen(prefix)) == 0)
+                return s + strlen(prefix);
+        return NULL;
+}
+
 bool endswith(const char *s, const char *postfix);
-bool startswith(const char *s, const char *prefix);
+
+
 bool startswith_no_case(const char *s, const char *prefix);

 bool first_word(const char *s, const char *word);
@@ -562,4 +568,16 @@ void warn_melody(void);

 char *strjoin(const char *x, ...) _sentinel_;

+#define DEFINE_TRIVIAL_CLEANUP_FUNC(type, func)                 \
+        static inline void func##p(type *p) {                   \
+                if (*p)                                         \
+                        func(*p);                               \
+        }                                                       \
+        struct __useless_struct_to_allow_trailing_semicolon__
+
+char *split_quoted(const char *c, size_t *l, char **state);
+char *cunescape_length(const char *s, size_t length);
+int unhexchar(char c) _const_;
+int unoctchar(char c) _const_;
+
 #endif
--- a/lsinitrd-bash-completion.sh
+++ b/lsinitrd-bash-completion.sh
@@ -1,6 +1,3 @@
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Copyright 2013 Red Hat, Inc.  All rights reserved.
 #
--- a/lsinitrd.sh
+++ b/lsinitrd.sh
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Copyright 2005-2010 Harald Hoyer <harald@redhat.com>
 # Copyright 2005-2010 Red Hat, Inc.  All rights reserved.
@@ -27,20 +25,26 @@ usage()
        echo
        echo "-h, --help                  print a help message and exit."
        echo "-s, --size                  sort the contents of the initramfs by size."
+        echo "-m, --mod                   list modules."
        echo "-f, --file <filename>       print the contents of <filename>."
        echo "-k, --kver <kernel version> inspect the initramfs of <kernel version>."
        echo
    } >&2
 }

+
+[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
+
 sorted=0
+modules=0
 declare -A filenames

 unset POSIXLY_CORRECT
 TEMP=$(getopt \
-    -o "shf:k:" \
+    -o "shmf:k:" \
    --long kver: \
    --long file: \
+    --long mod \
    --long help \
    --long size \
    -- "$@")
@@ -58,6 +62,7 @@ while (($# > 0)); do
        -f|--file)  filenames[${2#/}]=1; shift;;
        -s|--size)  sorted=1;;
        -h|--help)  usage; exit 0;;
+        -m|--mod)   modules=1;;
        --)         shift;break;;
        *)          usage; exit 1;;
    esac
@@ -103,50 +108,129 @@ if ! [[ -f "$image" ]]; then
    exit 1
 fi

-read -N 6 bin < "$image"
-case $bin in
-    $'\x1f\x8b'*)
-        CAT="zcat";;
-    BZh*)
-        CAT="bzcat";;
-    $'\x71\xc7'*|070701)
-        CAT="cat";;
-    *)
-        CAT="xzcat";
-        if echo "test"|xz|xzcat --single-stream >/dev/null 2>&1; then
-            CAT="xzcat --single-stream"
-        fi
-        ;;
-esac
-
-ret=0
-
-if (( ${#filenames[@]} > 0 )); then
+extract_files()
+{
    (( ${#filenames[@]} == 1 )) && nofileinfo=1
    for f in ${!filenames[@]}; do
        [[ $nofileinfo ]] || echo "initramfs:/$f"
        [[ $nofileinfo ]] || echo "========================================================================"
-        $CAT -- $image | cpio --extract --verbose --quiet --to-stdout $f 2>/dev/null
+        $CAT $image | cpio --extract --verbose --quiet --to-stdout $f 2>/dev/null
        ((ret+=$?))
        [[ $nofileinfo ]] || echo "========================================================================"
        [[ $nofileinfo ]] || echo
    done
-else
-    echo "Image: $image: $(du -h $image | while read a b; do echo $a;done)"
-    echo "========================================================================"
-    version=$($CAT -- "$image" | cpio --extract --verbose --quiet --to-stdout -- '*lib/dracut/dracut-*' 2>/dev/null)
-    ((ret+=$?))
-    echo "$version with dracut modules:"
-    $CAT -- "$image" | cpio --extract --verbose --quiet --to-stdout -- '*lib/dracut/modules.txt' 2>/dev/null
+}
+
+list_modules()
+{
+    echo "dracut modules:"
+    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/modules.txt' 'usr/lib/dracut/modules.txt' 2>/dev/null
    ((ret+=$?))
+}
+
+list_files()
+{
    echo "========================================================================"
    if [ "$sorted" -eq 1 ]; then
-        $CAT -- "$image" | cpio --extract --verbose --quiet --list | sort -n -k5
+        $CAT "$image" | cpio --extract --verbose --quiet --list | sort -n -k5
    else
-        $CAT -- "$image" | cpio --extract --verbose --quiet --list | sort -k9
+        $CAT "$image" | cpio --extract --verbose --quiet --list | sort -k9
    fi
    ((ret+=$?))
    echo "========================================================================"
+}
+
+
+if (( ${#filenames[@]} <= 0 )); then
+    echo "Image: $image: $(du -h $image | while read a b; do echo $a;done)"
+    echo "========================================================================"
+fi
+
+read -N 6 bin < "$image"
+case $bin in
+    $'\x71\xc7'*|070701)
+        CAT="cat --"
+        is_early=$(cpio --extract --verbose --quiet --to-stdout -- 'early_cpio' < "$image" 2>/dev/null)
+        if [[ "$is_early" ]]; then
+            if (( ${#filenames[@]} > 0 )); then
+                extract_files
+            else
+                echo "Early CPIO image"
+                list_files
+            fi
+            SKIP="$dracutbasedir/skipcpio"
+            if ! [[ -x $SKIP ]]; then
+                echo
+                echo "'$SKIP' not found, cannot display remaining contents!" >&2
+                echo
+                exit 0
+            fi
+        fi
+        ;;
+esac
+
+CAT=$({
+        if [[ $SKIP ]]; then
+            $SKIP "$image"
+        else
+            cat "$image"
+        fi } | {
+        read -N 6 bin
+        case $bin in
+            $'\x1f\x8b'*)
+                echo "zcat --"
+                ;;
+            BZh*)
+                echo "bzcat --"
+                ;;
+            $'\x71\xc7'*|070701)
+                echo "cat --"
+                ;;
+            $'\x02\x21'*)
+                echo "lz4 -d -c"
+                ;;
+            $'\x89'LZO$'\0'*)
+                echo "lzop -d -c"
+                ;;
+            *)
+                if echo "test"|xz|xzcat --single-stream >/dev/null 2>&1; then
+                    echo "xzcat --single-stream --"
+                else
+                    echo "xzcat --"
+                fi
+                ;;
+        esac
+    })
+
+skipcpio()
+{
+    $SKIP "$@" | $ORIG_CAT
+}
+
+if [[ $SKIP ]]; then
+    ORIG_CAT="$CAT"
+    CAT=skipcpio
+fi
+
+ret=0
+
+if (( ${#filenames[@]} > 0 )); then
+    extract_files
+else
+    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/dracut-*' 'usr/lib/dracut/dracut-*' 2>/dev/null)
+    ((ret+=$?))
+    echo "Version: $version"
+    echo
+    if [ "$modules" -eq 1 ]; then
+        list_modules
+        echo "========================================================================"
+    else
+        echo -n "Arguments: "
+        $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/build-parameter.txt' 'usr/lib/dracut/build-parameter.txt' 2>/dev/null
+        echo
+        list_modules
+        list_files
+    fi
 fi

 exit $ret
--- a/mkinitrd-dracut.sh
+++ b/mkinitrd-dracut.sh
@@ -1,6 +1,11 @@
 #!/bin/bash --norc
 kver=$(uname -r)

+boot_dir="/boot"
+quiet=0
+host_only=0
+force=0
+
 error() { echo "$@" >&2; }

 usage () {
@@ -24,36 +29,105 @@ read_arg() {
    # $1 = arg name
    # $2 = arg value
    # $3 = arg parameter
-    local rematch='^[^=]*=(.*)$'
+    param="$1"
+    local rematch='^[^=]*=(.*)$' result
    if [[ $2 =~ $rematch ]]; then
-        read "$1" <<< "${BASH_REMATCH[1]}"
-    elif [[ $3 != -* ]]; then
-        # Only read next arg if it not an arg itself.
-        read "$1" <<< "$3"
-        # There is no way to shift our callers args, so
-        # return 1 to indicate they should do it instead.
-        return 1
+        read "$param" <<< "${BASH_REMATCH[1]}"
+    else
+	for ((i=3; $i <= $#; i++)); do
+            # Only read next arg if it not an arg itself.
+            if [[ ${@:$i:1} = -* ]];then
+		break
+            fi
+            result="$result ${@:$i:1}"
+            # There is no way to shift our callers args, so
+            # return "no of args" to indicate they should do it instead.
+	done
+	read "$1" <<< "$result"
+        return $(($i - 3))
    fi
 }

+# Taken over from SUSE mkinitrd
+default_kernel_images() {
+    local regex kernel_image kernel_version version_version initrd_image
+    local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
+
+    case "$(uname -m)" in
+        s390|s390x)
+            regex='image'
+            ;;
+        ppc|ppc64)
+            regex='vmlinux'
+            ;;
+        i386|x86_64)
+            regex='vmlinuz'
+            ;;
+        arm*)
+            regex='[uz]Image'
+            ;;
+        aarch64)
+            regex='Image'
+            ;;
+        *)  regex='vmlinu.'
+            ;;
+    esac
+
+    # user mode linux
+    if grep -q UML /proc/cpuinfo; then
+            regex='linux'
+    fi
+
+    kernel_images=""
+    initrd_images=""
+    for kernel_image in $(ls $boot_dir \
+            | sed -ne "\|^$regex\(-[0-9.]\+-[0-9]\+-[a-z0-9]\+$\)\?|p" \
+            | grep -v kdump$ ) ; do
+
+        # Note that we cannot check the RPM database here -- this
+        # script is itself called from within the binary kernel
+        # packages, and rpm does not allow recursive calls.
+
+        [ -L "$boot_dir/$kernel_image" ] && continue
+        [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
+        kernel_version=$(/usr/bin/get_kernel_version \
+                         $boot_dir/$kernel_image 2> /dev/null)
+        initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
+        if [ "$kernel_image" != "$initrd_image" -a \
+             -n "$kernel_version" -a \
+             -d "/lib/modules/$kernel_version" ]; then
+                kernel_images="$kernel_images $boot_dir/$kernel_image"
+                initrd_images="$initrd_images $boot_dir/$initrd_image"
+        fi
+    done
+    for kernel_image in $kernel_images;do
+	kernels="$kernels ${kernel_image#*-}"
+    done
+    for initrd_image in $initrd_images;do
+	targets="$targets $initrd_image"
+    done
+    host_only=1
+    force=1
+}
+
 while (($# > 0)); do
    case ${1%%=*} in
-        --with-usb) read_arg usbmodule "$@" || shift
+        --with-usb) read_arg usbmodule "$@" || shift $?
            basicmodules="$basicmodules ${usbmodule:-usb-storage}"
            unset usbmodule;;
-        --with-avail) read_arg modname "$@" || shift
+        --with-avail) read_arg modname "$@" || shift $?
            basicmodules="$basicmodules $modname";;
-        --with) read_arg modname "$@" || shift
+        --with) read_arg modname "$@" || shift $?
            basicmodules="$basicmodules $modname";;
        --version)
            echo "mkinitrd: dracut compatibility wrapper"
            exit 0;;
        -v|--verbose) dracut_args="${dracut_args} -v";;
-        -f|--force) dracut_args="${dracut_args} -f";;
-        --preload) read_arg modname "$@" || shift
+        -f|--force) force=1;;
+        --preload) read_arg modname "$@" || shift $?
            basicmodules="$basicmodules $modname";;
        --image-version) img_vers=yes;;
-        --rootfs) read_arg rootfs "$@" || shift
+        --rootfs|-d) read_arg rootfs "$@" || shift $?
            dracut_args="${dracut_args} --filesystems $rootfs";;
        --nocompress) dracut_args="$dracut_args --no-compress";;
        --help) usage -n;;
@@ -80,10 +154,31 @@ while (($# > 0)); do
        --looppath*) ;;
        --dsdt*) ;;
        --bootchart) ;;
-        *) if [[ ! $target ]]; then
-            target=$1
-            elif [[ ! $kernel ]]; then
-            kernel=$1
+	-s) ;;
+	--quiet|-q) quiet=1;;
+	-b) read_arg boot_dir "$@" || shift $?
+	    if [ ! -d $boot_dir ];then
+		error "Boot directory $boot_dir does not exist"
+		exit 1
+	    fi
+	    ;;
+	-k) # Would be nice to get a list of images here
+	    read_arg kernel_images "$@" || shift $?
+	    for kernel_image in $kernel_images;do
+		kernels="$kernels ${kernel_image#*-}"
+	    done
+	    host_only=1
+	    force=1
+	    ;;
+	-i) read_arg initrd_images "$@" || shift $?
+	    for initrd_image in $initrd_images;do
+		targets="$targets $boot_dir/$initrd_image"
+	    done
+	    ;;
+        *)  if [[ ! $targets ]]; then
+            targets=$1
+            elif [[ ! $kernels ]]; then
+            kernels=$1
            else
            usage
            fi;;
@@ -91,11 +186,41 @@ while (($# > 0)); do
    shift
 done

-[[ $target && $kernel ]] || usage
-[[ $img_vers ]] && target="$target-$kernel"
+[[ $targets && $kernels ]] || default_kernel_images
+[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage)

-if [[ $basicmodules ]]; then
-        dracut $dracut_args --add-drivers "$basicmodules" "$target" "$kernel"
-else
-        dracut $dracut_args "$target" "$kernel"
-fi
+# We can have several targets/kernels, transform the list to an array
+targets=( $targets )
+[[ $kernels ]] && kernels=( $kernels )
+
+[[ $host_only == 1 ]] && dracut_args="${dracut_args} -H"
+[[ $force == 1 ]]     && dracut_args="${dracut_args} -f"
+
+echo "Creating: target|kernel|dracut args|basicmodules "
+for ((i=0 ; $i<${#targets[@]} ; i++)); do
+
+    if [[ $img_vers ]];then
+	target="${targets[$i]}-${kernels[$i]}"
+    else
+	target="${targets[$i]}"
+    fi
+    kernel="${kernels[$i]}"
+
+    # Duplicate code: No way found how to redirect output based on $quiet
+    if [[ $quiet == 1 ]];then
+	echo "$target|$kernel|$dracut_args|$basicmodules"
+	if [[ $basicmodules ]]; then
+            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel" &>/dev/null
+	else
+            dracut $dracut_args "$target" "$kernel" &>/dev/null
+	fi
+    else
+	if [[ $basicmodules ]]; then
+            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel"
+	else
+            dracut $dracut_args "$target" "$kernel"
+	fi
+    fi
+done
--- a/mkinitrd-suse.8.asc
+++ b/mkinitrd-suse.8.asc
@@ -0,0 +1,105 @@
+MKINITRD(8)
+===========
+:doctype: manpage
+:man source:   dracut
+:man manual:   dracut
+
+NAME
+----
+mkinitrd-suse - is a compat wrapper, which calls dracut to generate an initramfs
+
+SYNOPSIS
+--------
+*mkinitrd* ['OPTION...']
+
+DESCRIPTION
+-----------
+*mkinitrd* creates an initramfs image <initrd-image> for the kernel with
+version <kernel-version> by calling *dracut*.
+
+[IMPORTANT]
+This version of mkinitrd is provided for compability with older
+versions of mkinitrd. If a more fine grained control over the
+resulting image is needed, *dracut* should be called directly.
+
+OPTIONS
+-------
+**-R, --version**::
+    print info about the version
+
+**-k** _<kernel_list>_::
+    List of kernel images for which initrd files are created (relative
+    to _boot_dir_), defaults to _vmlinux_ on ppc/ppc64, _image_ on s390/s390x
+    and _vmlinuz_ for everything else.
+
+**-i** _<initrd_list>_::
+    List of file names (relative to _boot_dir_) for the initrd; positions
+    have to match the _kernel_list_. Defaults to _initrd_.
+
+**-m** _<module_list>_::
+    Modules to include in initrd, defaults to _INITRD_MODULES_ variable
+    in */etc/sysconfig/kernel*.
+
+**-f** _<feature_list>_::
+    Features to be enabled for the initrd. In general mkinitrd
+    configures the initrd for the root device it is started from. With
+    this option additional feature can be enabled.
+
+**-b** _<bootdir>_::
+    Boot directory, defaults to */boot*, where the initrd is created.
+
+**-d** _<root_device>_::
+    Root device, defaults to the device from which the root_dir is
+    mounted; overwrites the rootdev enviroment variable if set
+
+**-s** _<size>_::
+    Add splash animation and bootscreen to initrd.
+
+**-D** _<interface>::
+    Run dhcp on the specified interface (for example "eth0").
+
+**-I** _<interface>::
+    Configure the specified interface statically.
+
+**-a** _<acpi_dsdt>::
+    Attach compiled ACPI DSDT (Differentiated System Description Table)
+    to initrd. This replaces the DSDT of the BIOS. Defaults to the
+    _ACPI_DSDT_ variable in */etc/sysconfig/kernel*.
+
+**-M** _<map>::
+    System.map file to use.
+
+**-B**::
+    Don’t run the *update-bootloader(8)* script after the initrd(s) have
+    been created. This is useful if you call mkinitrd(8) for anything
+    else than the running system.
+
+**-A**::
+    Create a so called "monster initrd" which includes all available
+    features and modules. This calls dracut with --no-hostonly and
+    --no-hostonly-cmdline parameters internally, instead of the default
+    --hostonly and --hostonly-cmdline.
+
+**-v, --verbose**::
+    increase verbosity level
+
+**-L**::
+    Disable logging to _/var/log/YaST2/mkinitrd.log_. This is useful for
+    testing if you don’t want to clutter the system log.
+
+**--help**::
+    print a help message and exit.
+
+AVAILABILITY
+------------
+The mkinitrd command is part of the dracut package and is available from
+link:$$https://dracut.wiki.kernel.org$$[https://dracut.wiki.kernel.org]
+
+AUTHORS
+-------
+Harald Hoyer, Hannes Reinecke
+
+SEE ALSO
+--------
+*dracut*(8)
+*update-bootloader*(8)
--- a/mkinitrd-suse.sh
+++ b/mkinitrd-suse.sh
@@ -0,0 +1,348 @@
+#!/bin/bash --norc
+#
+# mkinitrd compability wrapper for SUSE.
+#
+# Copyright (c) 2013 SUSE Linux Products GmbH. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+boot_dir="/boot"
+quiet=0
+logfile=/var/log/YaST2/mkinitrd.log
+dracut_cmd=dracut
+
+error() { echo "$@" >&2; }
+
+usage () {
+    [[ $1 = '-n' ]] && cmd=echo || cmd=error
+
+    $cmd "usage: ${0##*/} [options]"
+    $cmd ""
+    $cmd "	Create initial ramdisk images that contain all kernel modules needed"
+    $cmd "	in the early boot process, before the root file system becomes"
+    $cmd "	available."
+    $cmd "	This usually includes SCSI and/or RAID modules, a file system module"
+    $cmd "	for the root file system, or a network interface driver module for dhcp."
+    $cmd ""
+    $cmd "	options:"
+    $cmd "	-f \"feature list\"	Features to be enabled when generating initrd."
+    $cmd "				Available features are:"
+    $cmd "					iscsi, md, multipath, lvm, lvm2,"
+    $cmd "					ifup, fcoe, dcbd"
+    $cmd "	-k \"kernel list\"	List of kernel images for which initrd files are"
+    $cmd "				created. Defaults to all kernels found in /boot."
+    $cmd "	-i \"initrd list\"	List of file names for the initrd; position have"
+    $cmd "				match to \"kernel list\". Defaults to all kernels"
+    $cmd "				found in /boot."
+    $cmd "	-b boot_dir		Boot directory. Defaults to /boot."
+    $cmd "	-t tmp_dir		Temporary directory. Defaults to /var/tmp."
+    $cmd "	-M map			System.map file to use."
+    $cmd "	-A			Create a so called \"monster initrd\" which"
+    $cmd "				includes all features and modules possible."
+    $cmd "	-B			Do not update bootloader configuration."
+    $cmd "	-v			Verbose mode."
+    $cmd "	-L			Disable logging."
+    $cmd "	-h			This help screen."
+    $cmd "	-m \"module list\"	Modules to include in initrd. Defaults to the"
+    $cmd "				INITRD_MODULES variable in /etc/sysconfig/kernel"
+    $cmd "	-u \"DomU module list\"	Modules to include in initrd. Defaults to the"
+    $cmd "				DOMU_INITRD_MODULES variable in"
+    $cmd "				/etc/sysconfig/kernel."
+    $cmd "	-d root_device		Root device. Defaults to the device from"
+    $cmd "				which / is mounted. Overrides the rootdev"
+    $cmd "				enviroment variable if set."
+    $cmd "	-j device		Journal device"
+    $cmd "	-D interface		Run dhcp on the specified interface."
+    $cmd "	-I interface		Configure the specified interface statically."
+    $cmd "	-a acpi_dsdt		Obsolete, do not use."
+    $cmd "	-s size			Add splash animation and bootscreen to initrd."
+
+    [[ $1 = '-n' ]] && exit 0
+    exit 1
+}
+
+# Little helper function for reading args from the commandline.
+# it automatically handles -a b and -a=b variants, and returns 1 if
+# we need to shift $3.
+read_arg() {
+    # $1 = arg name
+    # $2 = arg value
+    # $3 = arg parameter
+    param="$1"
+    local rematch='^[^=]*=(.*)$' result
+    if [[ $2 =~ $rematch ]]; then
+        read "$param" <<< "${BASH_REMATCH[1]}"
+    else
+	for ((i=3; $i <= $#; i++)); do
+            # Only read next arg if it not an arg itself.
+            if [[ ${@:$i:1} = -* ]];then
+		break
+            fi
+            result="$result ${@:$i:1}"
+            # There is no way to shift our callers args, so
+            # return "no of args" to indicate they should do it instead.
+	done
+	read "$1" <<< "$result"
+        return $(($i - 3))
+    fi
+}
+
+# Helper functions to calculate ipconfig command line
+calc_netmask() {
+    local prefix=$1
+
+    [ -z "$prefix" ] && return
+    mask=$(echo "(2 ^ 32) - (2 ^ $prefix)" | bc -l)
+    byte1=$(( mask >> 24 ))
+    byte2=$(( mask >> 16 ))
+    byte3=$(( mask >> 8 ))
+    byte4=$(( mask & 0xff ))
+    netmask=$(printf "%d.%d.%d.%d" $(( byte1 & 0xff )) $(( byte2 & 0xff )) $(( byte3 & 0xff )) $byte4);
+
+    echo $netmask
+}
+
+ipconfig() {
+    local interface=$1
+    local iplink macaddr broadcast gateway ipaddr prefix netmask
+
+    iplink=$(ip addr show dev $interface | sed -n 's/ *inet \(.*\) brd.*/\1/p')
+    macaddr=$(ip addr show dev $interface | sed -n 's/.*ether \(.*\) brd.*/\1/p')
+    broadcast=$(ip addr show dev $interface | sed -n 's/.*brd \(.*\) scope.*/\1/p')
+    gateway=$(ip route show dev $interface | sed -n 's/default via \([0-9\.]*\).*/\1/p')
+
+    ipaddr=${iplink%%/*}
+    prefix=${iplink##*/}
+    netmask=$(calc_netmask $prefix)
+
+    echo "${ipaddr}:${serveraddr}:${gateway}:${netmask}:${hostname}:${interface}:none::${macaddr}"
+}
+
+is_xen_kernel() {
+    local kversion=$1
+    local root_dir=$2
+    local cfg
+
+    for cfg in ${root_dir}/boot/config-$kversion $root_dir/lib/modules/$kversion/build/.config
+    do
+        test -r $cfg || continue
+        grep -q "^CONFIG_XEN=y\$" $cfg
+        return
+    done
+    test $kversion != "${kversion%-xen*}"
+    return
+}
+
+
+# Taken over from SUSE mkinitrd
+default_kernel_images() {
+    local regex kernel_image kernel_version version_version initrd_image
+    local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
+
+    case "$(uname -m)" in
+        s390|s390x)
+            regex='image'
+            ;;
+        ppc|ppc64)
+            regex='vmlinux'
+            ;;
+        i386|x86_64)
+            regex='vmlinuz'
+            ;;
+        arm*)
+            regex='[uz]Image'
+            ;;
+        aarch64)
+            regex='Image'
+            ;;
+        *)  regex='vmlinu.'
+            ;;
+    esac
+
+    kernel_images=""
+    initrd_images=""
+    for kernel_image in $(ls $boot_dir \
+            | sed -ne "\|^$regex\(-[0-9.]\+-[0-9]\+-[a-z0-9]\+$\)\?|p" \
+            | grep -v kdump$ ) ; do
+
+        # Note that we cannot check the RPM database here -- this
+        # script is itself called from within the binary kernel
+        # packages, and rpm does not allow recursive calls.
+
+        [ -L "$boot_dir/$kernel_image" ] && continue
+        [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
+        kernel_version=$(/usr/bin/get_kernel_version \
+                         $boot_dir/$kernel_image 2> /dev/null)
+        initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
+        if [ "$kernel_image" != "$initrd_image" -a \
+             -n "$kernel_version" -a \
+             -d "/lib/modules/$kernel_version" ]; then
+                kernel_images="$kernel_images $boot_dir/$kernel_image"
+                initrd_images="$initrd_images $boot_dir/$initrd_image"
+        fi
+    done
+    for kernel_image in $kernel_images;do
+	kernels="$kernels ${kernel_image#*-}"
+    done
+    for initrd_image in $initrd_images;do
+	targets="$targets $initrd_image"
+    done
+}
+
+while (($# > 0)); do
+    case ${1%%=*} in
+	-f) read_arg feature_list "$@" || shift $?
+	    # Could be several features
+	    ;;
+	-k) # Would be nice to get a list of images here
+	    read_arg kernel_images "$@" || shift $?
+	    for kernel_image in $kernel_images;do
+		kernels="$kernels ${kernel_image#*-}"
+	    done
+	    ;;
+	-i) read_arg initrd_images "$@" || shift $?
+	    for initrd_image in $initrd_images;do
+		# Check if the initrd_image contains a path.
+		# if not, then add the default boot_dir
+		dname=`dirname $initrd_image`
+		if [ "$dname" == "." ]; then
+                    targets="$targets $boot_dir/$initrd_image";
+		else
+                    targets="$targets $initrd_image";
+		fi
+	    done
+	    ;;
+	-b) read_arg boot_dir "$@" || shift $?
+	    if [ ! -d $boot_dir ];then
+		error "Boot directory $boot_dir does not exist"
+		exit 1
+	    fi
+	    ;;
+	-t) read_arg tmp_dir "$@" || shift $?
+	    dracut_args="${dracut_args} --tmpdir $tmp_dir"
+	    ;;
+	-M) read_arg map_file "$@" || shift $?
+	    ;;
+	-A) host_only=0;;
+	-B) skip_update_bootloader=1;;
+        -v|--verbose) dracut_args="${dracut_args} -v";;
+	-L) logfile=;;
+        -h|--help) usage -n;;
+	-m) read_arg module_list "$@" || shift $? ;;
+	-u) read_arg domu_module_list "$@" || shift $?
+	    echo "mkinitrd: DomU modules not yet supported" ;;
+        -d) read_arg rootfs "$@" || shift $?
+            dracut_args="${dracut_args} --filesystems $rootfs" ;;
+	-D) read_arg dhcp_if "$@" || shift $?
+	    dracut_cmdline="${dracut_cmdline} ip=${dhcp_if}:dhcp"
+	    ;;
+	-I) read_arg static_if "$@" || shift $?
+	    dracut_cmdline="${dracut_cmdline} ip=$(ipconfig $static_if)":
+	    ;;
+	-a) read_arg acpi_dsdt "$@" || shift $?
+	    echo "Obsolete -a param, use acpi_table_dir= and acpi_override= variables in /etc/dracut.conf.d/"
+	    exit 1
+	    ;;
+	-s) read_arg boot_splash "$@" || shift $?
+	    echo "mkinitrd: boot splash not yet supported"
+	    exit 1
+	    ;;
+	-V) echo "mkinitrd: vendor scipts are no longer supported"
+	    exit 1;;
+	--dracut)
+	    read_arg dracut_cmd "$@" || shift $? ;;
+        --version|-R)
+            echo "mkinitrd: dracut compatibility wrapper"
+            exit 0;;
+	--quiet|-q) quiet=1;;
+        *)  if [[ ! $targets ]]; then
+            targets=$1
+            elif [[ ! $kernels ]]; then
+            kernels=$1
+            else
+            usage
+            fi;;
+    esac
+    shift
+done
+
+[[ $targets && $kernels ]] || default_kernel_images
+if [[ ! $targets || ! $kernels ]];then
+    error "No kernel found in $boot_dir"
+fi
+
+# We can have several targets/kernels, transform the list to an array
+targets=( $targets )
+[[ $kernels ]] && kernels=( $kernels )
+
+[[ $logfile ]]        && dracut_args="${dracut_args} --logfile $logfile"
+dracut_args="${dracut_args} --force"
+
+[[ $dracut_cmdline ]] && dracut_args="${dracut_args} --kernel-cmdline ${dracut_cmdline}"
+[ -z "$(type -p update-bootloader)" ] && skip_update_bootloader=1
+
+# Update defaults from /etc/sysconfig/kernel
+if [ -f /etc/sysconfig/kernel ] ; then
+    . /etc/sysconfig/kernel
+fi
+[[ $module_list ]] || module_list="${INITRD_MODULES}"
+[[ $domu_module_list ]] || domu_module_list="${DOMU_INITRD_MODULES}"
+shopt -s extglob
+
+for ((i=0 ; $i<${#targets[@]} ; i++)); do
+
+    if [[ $img_vers ]];then
+	target="${targets[$i]}-${kernels[$i]}"
+    else
+	target="${targets[$i]}"
+    fi
+    kernel="${kernels[$i]}"
+
+    if is_xen_kernel $kernel $rootfs ; then
+	modules_all="${module_list} ${domu_module_list}"
+    else
+        modules_all="${module_list}"
+    fi
+
+    # Remove leading and trailing spaces needs (set above): shopt -s extglob
+    modules_all=${modules_all%%+([[:space:]])}
+    modules_all=${modules_all##+([[:space:]])}
+
+    echo "Creating initrd: $target"
+
+    # Duplicate code: No way found how to redirect output based on $quiet
+    if [[ $quiet == 1 ]];then
+        # Duplicate code: --force-drivers must not be called with empty string
+        # -> dracut bug workarounded ugly, because of complex whitespace
+        # expansion magics
+        if [ -n "${modules_all}" ];then
+            $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel" &>/dev/null
+        else
+            $dracut_cmd $dracut_args "$target" "$kernel" &>/dev/null
+        fi
+    else
+        if [ -n "${modules_all}" ];then
+            $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel"
+        else
+            $dracut_cmd $dracut_args "$target" "$kernel"
+        fi
+    fi
+done
+
+if [ "$skip_update_bootloader" ] ; then
+    echo 2>&1 "Did not refresh the bootloader. You might need to refresh it manually."
+else
+    update-bootloader --refresh
+fi
--- a/mkinitrd.8.asc
+++ b/mkinitrd.8.asc
@@ -41,8 +41,8 @@ OPTIONS

 **--preload=<module>**::
     preload the kernel module <module> in the initramfs before any other kernel
-     modules are loaded. This can be used to ensure a certain device naming, which
-     should in theory be avoided and the use of symbolic links in /dev is
+     modules are loaded. This can be used to ensure a certain device naming,
+     which should in theory be avoided and the use of symbolic links in /dev is
     encouraged.

 **--nocompress**::
--- a/modules.d/00bash/module-setup.sh
+++ b/modules.d/00bash/module-setup.sh
@@ -1,15 +1,16 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
-    [ -x /bin/bash ]
+    require_binaries /bin/bash
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
    # If another shell is already installed, do not use bash
    [[ -x $initdir/bin/sh ]] && return
--- a/modules.d/00bootchart/module-setup.sh
+++ b/modules.d/00bootchart/module-setup.sh
@@ -1,17 +1,18 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    [[ "$mount_needs" ]] && return 1
-    [ -x /sbin/bootchartd ] || return 1
+    require_binaries /sbin/bootchartd || return 1
    return 255
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
    inst_symlink /init /sbin/init
    inst_dir /lib/bootchart/tmpfs
--- a/modules.d/00dash/module-setup.sh
+++ b/modules.d/00dash/module-setup.sh
@@ -1,15 +1,16 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
-    [ -x /bin/dash ]
+    require_binaries /bin/dash
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
    # If another shell is already installed, do not use dash
    [[ -x $initdir/bin/sh ]] && return
--- a/modules.d/00systemd-bootchart/module-setup.sh
+++ b/modules.d/00systemd-bootchart/module-setup.sh
@@ -1,17 +1,18 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    [[ "$mount_needs" ]] && return 1
-    [ -x $systemdutildir/systemd-bootchart ] || return 1
+    require_binaries $systemdutildir/systemd-bootchart || return 1
    return 255
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
    inst_symlink /init /sbin/init
    inst_multiple $systemdutildir/systemd-bootchart
--- a/modules.d/01fips/fips-boot.sh
+++ b/modules.d/01fips/fips-boot.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
    rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
--- a/modules.d/01fips/fips-noboot.sh
+++ b/modules.d/01fips/fips-noboot.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
    rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
--- a/modules.d/01fips/fips.sh
+++ b/modules.d/01fips/fips.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 mount_boot()
 {
@@ -60,8 +58,8 @@ do_rhevh_check()
    KERNEL=$(uname -r)
    kpath=${1}

-    # If we're on RHEV-H, the kernel is in /dev/.initramfs/live/vmlinuz0
-    HMAC_SUM_ORIG=$(cat /boot/.vmlinuz-${KERNEL}.hmac | while read a b; do printf "%s\n" $a; done)
+    # If we're on RHEV-H, the kernel is in /run/initramfs/live/vmlinuz0
+    HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b; do printf "%s\n" $a; done)
    HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b; do printf "%s\n" $a; done || return 1)
    if [ -z "$HMAC_SUM_ORIG" ] || [ -z "$HMAC_SUM_CALC" ] || [ "${HMAC_SUM_ORIG}" != "${HMAC_SUM_CALC}" ]; then
        warn "HMAC sum mismatch"
@@ -96,7 +94,6 @@ do_fips()
                _found=0
                while read _k _s _v; do
                    [ "$_k" != "name" -a "$_k" != "driver" ] && continue
-                    [ "$_k" = "driver" ] && _v=$(str_replace "$_v" "_" "-")
                    [ "$_v" != "$_module" ] && continue
                    _found=1
                    break
@@ -112,10 +109,10 @@ do_fips()
    rmmod tcrypt

    info "Checking integrity of kernel"
-    if [ -e "$NEWROOT/dev/.initramfs/live/vmlinuz0" ]; then
-        do_rhevh_check "$NEWROOT/dev/.initramfs/live/vmlinuz0" || return 1
-    elif [ -e "$NEWROOT/dev/.initramfs/live/isolinux/vmlinuz0" ]; then
-        do_rhevh_check "$NEWROOT/dev/.initramfs/live/isolinux/vmlinuz0" || return 1
+    if [ -e "/run/initramfs/live/vmlinuz0" ]; then
+        do_rhevh_check /run/initramfs/live/vmlinuz0 || return 1
+    elif [ -e "/run/initramfs/live/isolinux/vmlinuz0" ]; then
+        do_rhevh_check /run/initramfs/live/isolinux/vmlinuz0 || return 1
    else
        sha512hmac -c "/boot/.vmlinuz-${KERNEL}.hmac" || return 1
    fi
--- a/modules.d/01fips/module-setup.sh
+++ b/modules.d/01fips/module-setup.sh
@@ -1,19 +1,20 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    return 255
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 installkernel() {
    local _fipsmodules _mod
    _fipsmodules="aead aes_generic aes-x86_64 ansi_cprng arc4 blowfish camellia cast6 cbc ccm "
-    _fipsmodules+="chainiv crc32c cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod "
+    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod "
    _fipsmodules+="ecb eseqiv fcrypt gcm ghash_generic hmac khazad lzo md4 md5 michael_mic rmd128 "
    _fipsmodules+="rmd160 rmd256 rmd320 rot13 salsa20 seed seqiv serpent sha1 sha224 sha256 sha256_generic "
    _fipsmodules+="sha384 sha512 sha512_generic tcrypt tea tnepres twofish wp256 wp384 wp512 xeta xtea xts zlib"
@@ -28,6 +29,7 @@ installkernel() {
    done
 }

+# called by dracut
 install() {
    local _dir
    inst_hook pre-trigger 01 "$moddir/fips-boot.sh"
@@ -38,8 +40,10 @@ install() {

    inst_libdir_file libsoftokn3.so libsoftokn3.so \
        libsoftokn3.chk libfreebl3.so libfreebl3.chk \
-        libssl.so 'hmaccalc/sha512hmac.hmac' libssl.so.10
+        libssl.so 'hmaccalc/sha512hmac.hmac' libssl.so.10 \
+        libfreeblpriv3.so libfreeblpriv3.chk

    inst_multiple -o prelink
+    inst_simple /etc/system-fips
 }

--- a/modules.d/02caps/caps.sh
+++ b/modules.d/02caps/caps.sh
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 capsmode=$(getarg rd.caps)

--- a/modules.d/02caps/module-setup.sh
+++ b/modules.d/02caps/module-setup.sh
@@ -1,19 +1,24 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
-    type -P capsh >/dev/null 2>&1
+    require_binaries capsh
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
-    inst_hook pre-pivot 00 "$moddir/caps.sh"
-    inst $(type -P capsh 2>/dev/null) /usr/sbin/capsh
-    # capsh wants bash and we need bash also
-    inst /bin/bash
+    if ! dracut_module_included "systemd"; then
+        inst_hook pre-pivot 00 "$moddir/caps.sh"
+        inst $(type -P capsh 2>/dev/null) /usr/sbin/capsh
+        # capsh wants bash and we need bash also
+        inst /bin/bash
+    else
+        dwarning "caps: does not work with systemd in the initramfs"
+    fi
 }

--- a/modules.d/02fips-aesni/module-setup.sh
+++ b/modules.d/02fips-aesni/module-setup.sh
@@ -1,15 +1,16 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    return 255
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 installkernel() {
    local _fipsmodules _mod
    _fipsmodules="aesni-intel ghash_clmulni_intel"
@@ -24,6 +25,7 @@ installkernel() {
    done
 }

+# called by dracut
 install() {
    return 0
 }
--- a/modules.d/03modsign/load-modsign-keys.sh
+++ b/modules.d/03modsign/load-modsign-keys.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Licensed under the GPLv2
 #
--- a/modules.d/03modsign/module-setup.sh
+++ b/modules.d/03modsign/module-setup.sh
@@ -1,14 +1,13 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Licensed under the GPLv2
 #
 # Copyright 2013 Red Hat, Inc.
 # Peter Jones <pjones@redhat.com>

+# called by dracut
 check() {
-    [[ -x /usr/bin/keyctl ]] || return 1
+    require_binaries keyctl || return 1

    # do not include module in hostonly mode,
    # if no keys are present
@@ -20,13 +19,15 @@ check() {
    return 0
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
    inst_dir /lib/modules/keys
-    inst_binary /usr/bin/keyctl
+    inst_binary keyctl

    inst_hook pre-trigger 01 "$moddir/load-modsign-keys.sh"

--- a/modules.d/03rescue/module-setup.sh
+++ b/modules.d/03rescue/module-setup.sh
@@ -1,16 +1,17 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    # do not add this module by default
    return 255
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
    inst_multiple -o ps grep more cat rm strace free showmount \
        ping netstat rpcinfo vi scp ping6 ssh \
--- a/modules.d/04watchdog/module-setup.sh
+++ b/modules.d/04watchdog/module-setup.sh
@@ -1,15 +1,16 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    return 255
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
    inst_hook cmdline   00 "$moddir/watchdog.sh"
    inst_hook cmdline   50 "$moddir/watchdog.sh"
--- a/modules.d/05busybox/module-setup.sh
+++ b/modules.d/05busybox/module-setup.sh
@@ -1,17 +1,18 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
-    type -P busybox >/dev/null || return 1
+    require_binaries busybox || return 1

    return 255
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
    local _i _progs _path _busybox
    _busybox=$(type -P busybox)
--- a/modules.d/10i18n/console_init.sh
+++ b/modules.d/10i18n/console_init.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 [ -n "$DRACUT_SYSTEMD" ] && exit 0

--- a/modules.d/10i18n/module-setup.sh
+++ b/modules.d/10i18n/module-setup.sh
@@ -1,27 +1,27 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    [[ "$mount_needs" ]] && return 1
+
+    require_binaries setfont loadkeys kbd_mode || return 1
+
    return 0
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
    if dracut_module_included "systemd"; then
-        [[ -f /etc/vconsole.conf ]] || return 0
        unset FONT
        unset KEYMAP
-        . /etc/vconsole.conf
-        # if vconsole.conf has no settings, do not include anything
-        [[ $FONT ]] || [[ $KEYMAP ]] || return 0
+        [[ -f /etc/vconsole.conf ]] && . /etc/vconsole.conf
    fi

-    inst_multiple -o $systemdutildir/systemd-vconsole-setup
    KBDSUBDIRS=consolefonts,consoletrans,keymaps,unimaps
    DEFAULT_FONT="${i18n_default_font:-LatArCyrHeb-16}"
    I18N_CONF="/etc/locale.conf"
@@ -153,6 +153,9 @@ install() {
        # Gentoo user may have KEYMAP set to something like "-u pl2",
        KEYMAP=${KEYMAP#-* }

+        # openSUSE user may have KEYMAP set to something like ".gz"
+        KEYMAP=${KEYMAP/.gz/}
+
        # KEYTABLE is a bit special - it defines base keymap name and UNICODE
        # determines whether non-UNICODE or UNICODE version is used

@@ -202,10 +205,20 @@ install() {
            inst_simple ${kbddir}/unimaps/${FONT_UNIMAP}.uni
        fi

-        mksubdirs ${initdir}${I18N_CONF}
-        mksubdirs ${initdir}${VCONFIG_CONF}
-        print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
-        print_vars KEYMAP EXT_KEYMAPS UNICODE FONT FONT_MAP FONT_UNIMAP >> ${initdir}${VCONFIG_CONF}
+        if dracut_module_included "systemd" && [[ -f ${I18N_CONF} ]]; then
+            inst_simple ${I18N_CONF}
+        else
+            mksubdirs ${initdir}${I18N_CONF}
+            print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
+        fi
+
+        if dracut_module_included "systemd" && [[ -f ${VCONFIG_CONF} ]]; then
+            inst_simple ${VCONFIG_CONF}
+        else
+            mksubdirs ${initdir}${VCONFIG_CONF}
+            print_vars KEYMAP EXT_KEYMAPS UNICODE FONT FONT_MAP FONT_UNIMAP >> ${initdir}${VCONFIG_CONF}
+        fi
+
        return 0
    }

@@ -229,16 +242,13 @@ install() {
        return 0
    }

-    if checks
-    then
+    if checks; then
        install_base

-        if [[ ${hostonly} ]]
-        then
+        if [[ ${hostonly} ]] && ! [[ ${i18n_install_all} == "yes" ]]; then
            install_local_i18n || install_all_kbd
        else
            install_all_kbd
        fi
    fi
 }
-
--- a/modules.d/10i18n/parse-i18n.sh
+++ b/modules.d/10i18n/parse-i18n.sh
@@ -1,42 +1,33 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 inst_key_val() {
    local _value
    local _file
    local _default
-    _default=$1
-    shift
-    _file=$1
-    shift
-    _value=$(getarg $@)
+    _file="$1"; shift
+    _key="$1"; shift
+    _default="$1"; shift
+    _value="$(getarg $@)"
    [ -z "${_value}" ] && _value=$_default
    if [ -n "${_value}" ]; then
-        printf '%s="%s"\n' $2 ${_value} >> $_file
+        printf '%s="%s"\n' ${_key} ${_value} >> $_file
    fi
    unset _file
    unset _value
 }

-inst_key_val '' /etc/vconsole.conf vconsole.keymap      KEYMAP      -d KEYTABLE
-inst_key_val '' /etc/vconsole.conf vconsole.font        FONT        -d SYSFONT
-inst_key_val '' /etc/vconsole.conf vconsole.font.map    FONT_MAP    -d CONTRANS
-inst_key_val '' /etc/vconsole.conf vconsole.font.unimap FONT_UNIMAP -d UNIMAP
-inst_key_val 1  /etc/vconsole.conf vconsole.font.unicode UNICODE vconsole.unicode
-inst_key_val '' /etc/vconsole.conf vconsole.keymap.ext  EXT_KEYMAP
+inst_key_val /etc/vconsole.conf KEYMAP      '' rd.vconsole.keymap       KEYMAP      -d KEYTABLE
+inst_key_val /etc/vconsole.conf FONT        '' rd.vconsole.font         FONT        -d SYSFONT
+inst_key_val /etc/vconsole.conf FONT_MAP    '' rd.vconsole.font.map     FONT_MAP    -d CONTRANS
+inst_key_val /etc/vconsole.conf FONT_UNIMAP '' rd.vconsole.font.unimap  FONT_UNIMAP -d UNIMAP
+inst_key_val /etc/vconsole.conf UNICODE      1 rd.vconsole.font.unicode UNICODE vconsole.unicode
+inst_key_val /etc/vconsole.conf EXT_KEYMAP  '' rd.vconsole.keymap.ext   EXT_KEYMAP

-inst_key_val '' /etc/locale.conf   locale.LANG   LANG
-inst_key_val '' /etc/locale.conf   locale.LC_ALL LC_ALL
+inst_key_val /etc/locale.conf   LANG        '' rd.locale.LANG           LANG
+inst_key_val /etc/locale.conf   LC_ALL      '' rd.locale.LC_ALL         LC_ALL

 if [ -f /etc/locale.conf ]; then
    . /etc/locale.conf
    export LANG
    export LC_ALL
 fi
-
-if [ -n "$DRACUT_SYSTEMD" ]; then
-    rm -f -- /etc/udev/rules.d/10-console.rules
-    rm -f -- /lib/udev/rules.d/10-console.rules
-    rm -f -- /lib/udev/console_init
-fi
--- a/modules.d/30convertfs/convertfs.sh
+++ b/modules.d/30convertfs/convertfs.sh
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 ROOT="$1"

--- a/modules.d/30convertfs/do-convertfs.sh
+++ b/modules.d/30convertfs/do-convertfs.sh
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 if getargbool 0 rd.convertfs; then
    if getargbool 0 rd.debug; then
--- a/modules.d/30convertfs/module-setup.sh
+++ b/modules.d/30convertfs/module-setup.sh
@@ -1,16 +1,17 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    [[ $mount_needs ]] && return 1
    return 255
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
    inst_multiple bash find ldconfig mv rm cp ln
    inst_hook pre-pivot 99 "$moddir/do-convertfs.sh"
--- a/modules.d/40network/dhclient-script.sh
+++ b/modules.d/40network/dhclient-script.sh
@@ -1,6 +1,15 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+PATH=/usr/sbin:/usr/bin:/sbin:/bin
+
+type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
+
+# We already need a set netif here
+netif=$interface
+
+# Huh? Interface configured?
+[ -f "/tmp/net.$netif.up" ] && exit 0

 setup_interface() {
    ip=$new_ip_address
@@ -12,6 +21,7 @@ setup_interface() {
    search=$(printf -- "$new_domain_search")
    namesrv=$new_domain_name_servers
    hostname=$new_host_name
+    lease_time=$new_dhcp_lease_time

    [ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override

@@ -29,9 +39,11 @@ setup_interface() {
        fi
    fi

-    ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} dev $netif
+    ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} \
+        valid_lft ${lease_time} preferred_lft ${lease_time} \
+        dev $netif

-    [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
+    [ -n "$gw" ] && echo ip route replace default via $gw dev $netif > /tmp/net.$netif.gw

    [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
    if  [ -n "$namesrv" ] ; then
@@ -42,27 +54,49 @@ setup_interface() {

    # Note: hostname can be fqdn OR short hostname, so chop off any
    # trailing domain name and explicity add any domain if set.
-    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
+    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 }

-PATH=/usr/sbin:/usr/bin:/sbin:/bin
+setup_interface6() {
+    domain=$new_domain_name
+    search=$(printf -- "$new_domain_search")
+    namesrv=$new_domain_name_servers
+    hostname=$new_host_name
+    [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
+    [ -n "$new_max_life" ] && lease_time=$new_max_life
+    preferred_lft=$lease_time
+    [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life

-export PS4="dhclient.$interface.$$ + "
-exec >>/run/initramfs/loginit.pipe 2>>/run/initramfs/loginit.pipe
-type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
-type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
+    [ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override

-# We already need a set netif here
-netif=$interface
+    ip -6 addr add ${new_ip6_address}/${new_ip6_prefixlen} \
+        dev ${netif} scope global \
+        ${lease_time:+valid_lft $lease_time} \
+        ${preferred_lft:+preferred_lft ${preferred_lft}}

-# Huh? Interface configured?
-[ -f "/tmp/net.$netif.up" ] && exit 0
+    [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
+    if  [ -n "$namesrv" ] ; then
+        for s in $namesrv; do
+            echo nameserver $s
+        done
+    fi >> /tmp/net.$netif.resolv.conf
+
+    # Note: hostname can be fqdn OR short hostname, so chop off any
+    # trailing domain name and explicity add any domain if set.
+    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
+}

 case $reason in
    PREINIT)
        echo "dhcp: PREINIT $netif up"
        linkup $netif
        ;;
+
+    PREINIT6)
+        echo "dhcp: PREINIT $netif up"
+        linkup $netif
+        ;;
+
    BOUND)
        echo "dhcp: BOND setting $netif"
        unset layer2
@@ -87,12 +121,31 @@ case $reason in
            echo "setup_net $netif"
            echo "source_hook initqueue/online $netif"
            [ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
-            echo "> /tmp/setup_net_$netif.ok"
-            echo "> /tmp/setup_net_\$(cat /sys/class/net/$netif/address).ok"
            echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
        } > $hookdir/initqueue/setup_net_$netif.sh

-        echo "[ -f /tmp/setup_net_$netif.ok ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
+        echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
+        >/tmp/net.$netif.up
+        ;;
+
+    BOUND6)
+        echo "dhcp: BOND6 setting $netif"
+        setup_interface6
+
+        set | while read line; do
+            [ "${line#new_}" = "$line" ] && continue
+            echo "$line"
+        done >/tmp/dhclient.$netif.dhcpopts
+
+        {
+            echo '. /lib/net-lib.sh'
+            echo "setup_net $netif"
+            echo "source_hook initqueue/online $netif"
+            [ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
+            echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
+        } > $hookdir/initqueue/setup_net_$netif.sh
+
+        echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
        >/tmp/net.$netif.up
        ;;
    *) echo "dhcp: $reason";;
--- a/modules.d/40network/dhcp-root.sh
+++ b/modules.d/40network/dhcp-root.sh
@@ -1,21 +1,23 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# Don't continue if root is ok
-[ -n "$rootok" ] && return

 # This script is sourced, so root should be set. But let's be paranoid
 [ -z "$root" ] && root=$(getarg root=)
-[ -z "$netroot" ] && netroot=$(getarg netroot=)

-if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] ; then
+if [ -z "$netroot" ]; then
+    for netroot in $(getargs netroot=); do
+        [ "$netroot" = "dhcp" ] && break
+        [ "$netroot" = "dhcp6" ] && break
+    done
+    [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] || unset netroot
+fi
+
+if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ]; then
    # Tell ip= checker that we need dhcp
    NEEDDHCP="1"

    # Done, all good!
    rootok=1
-    if [ "$netroot" != "dhcp" ] ; then
+    if [ "$netroot" != "dhcp" ] && [ "$netroot" != "dhcp6" ]; then
        netroot=$root
    fi

--- a/modules.d/40network/ifname-genrules.sh
+++ b/modules.d/40network/ifname-genrules.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 # if there are no ifname parameters, just use NAME=KERNEL
 if ! getarg ifname= >/dev/null ; then
--- a/modules.d/40network/ifup.sh
+++ b/modules.d/40network/ifup.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # We don't need to check for ip= errors here, that is handled by the
 # cmdline parser script
@@ -60,7 +58,7 @@ fi
 # bridge this interface?
 if [ -e /tmp/bridge.info ]; then
    . /tmp/bridge.info
-    for ethname in $ethnames ; do
+    for ethname in $bridgeslaves ; do
        if [ "$netif" = "$ethname" ]; then
            if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then
                : # We need to really setup bond (recursive call)
@@ -80,19 +78,33 @@ fi
 # in netroot case we prefer netroot to bringup $netif automaticlly
 [ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2"
 [ -z "$netroot" ] && [ -z "$manualup" ] && exit 0
-[ -n "$manualup" ] && >/tmp/net.$netif.manualup
+if [ -n "$manualup" ]; then
+    >/tmp/net.$netif.manualup
+else
+    [ -e /tmp/net.${netif}.did-setup ] && exit 0
+    [ -e /sys/class/net/$netif/address ] && \
+        [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && exit 0
+fi

 # Run dhclient
 do_dhcp() {
    # dhclient-script will mark the netif up and generate the online
    # event for nfsroot
    # XXX add -V vendor class and option parsing per kernel
+
+    [ -e /tmp/dhclient.$netif.pid ] && return 0
+
+    if ! iface_has_link $netif; then
+        echo "No carrier detected"
+        return 1
+    fi
    echo "Starting dhcp for interface $netif"
    dhclient "$@" -1 -q -cf /etc/dhclient.conf -pf /tmp/dhclient.$netif.pid -lf /tmp/dhclient.$netif.lease $netif \
        || echo "dhcp failed"
 }

 load_ipv6() {
+    [ -d /proc/sys/net/ipv6 ] && return
    modprobe ipv6
    i=0
    while [ ! -d /proc/sys/net/ipv6 ]; do
@@ -117,23 +129,23 @@ do_ipv6auto() {

 # Handle static ip configuration
 do_static() {
-    strstr $ip '*:*:*' && load_ipv6
+    strglobin $ip '*:*:*' && load_ipv6

    linkup $netif
    [ -n "$macaddr" ] && ip link set address $macaddr dev $netif
    [ -n "$mtu" ] && ip link set mtu $mtu dev $netif
-    if strstr $ip '*:*:*'; then
+    if strglobin $ip '*:*:*'; then
        # note no ip addr flush for ipv6
-        ip addr add $ip/$mask ${srv+peer $srv} dev $netif
+        ip addr add $ip/$mask ${srv:+peer $srv} dev $netif
+        wait_for_ipv6_dad $netif
    else
        ip addr flush dev $netif
-        ip addr add $ip/$mask ${srv+peer $srv} brd + dev $netif
+        ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif
    fi

-    [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
+    [ -n "$gw" ] && echo ip route replace default via $gw dev $netif > /tmp/net.$netif.gw
    [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname

-    > /tmp/setup_net_${netif}.ok
    return 0
 }

@@ -175,6 +187,7 @@ if [ -e /tmp/bond.${netif}.info ]; then

        for slave in $bondslaves ; do
            ip link set $slave down
+            cat /sys/class/net/$slave/address > /tmp/net.${netif}.${slave}.hwaddr
            echo "+$slave" > /sys/class/net/$bondname/bonding/slaves
            linkup $slave
        done
@@ -203,7 +216,7 @@ if [ -e /tmp/team.info ]; then
            fi
        done
        # Do not add slaves now
-        teamd -d -U -n -t $teammaster -f /etc/teamd/$teammaster.conf
+        teamd -d -U -n -N -t $teammaster -f /etc/teamd/$teammaster.conf
        for slave in $working_slaves; do
            # team requires the slaves to be down before joining team
            ip link set $slave down
@@ -221,7 +234,7 @@ if [ -e /tmp/bridge.info ]; then
    if [ "$netif" = "$bridgename" ] && [ ! -e /tmp/net.$bridgename.up ]; then
        brctl addbr $bridgename
        brctl setfd $bridgename 0
-        for ethname in $ethnames ; do
+        for ethname in $bridgeslaves ; do
            if [ "$ethname" = "$bondname" ] ; then
                DO_BOND_SETUP=yes ifup $bondname -m
            elif [ "$ethname" = "$teammaster" ] ; then
@@ -260,18 +273,15 @@ if [ "$netif" = "$vlanname" ] && [ ! -e /tmp/net.$vlanname.up ]; then
    ip link set "$vlanname" up
 fi

-# setup nameserver
-namesrv=$(getargs nameserver)
-if  [ -n "$namesrv" ] ; then
-    for s in $namesrv; do
-        echo nameserver $s
-    done
-fi >> /tmp/net.$netif.resolv.conf
-
 # No ip lines default to dhcp
 ip=$(getarg ip)

 if [ -z "$ip" ]; then
+    namesrv=$(getargs nameserver)
+    for s in $namesrv; do
+        echo nameserver $s >> /tmp/net.$netif.resolv.conf
+    done
+
    if [ "$netroot" = "dhcp6" ]; then
        do_dhcp -6
    else
@@ -303,21 +313,32 @@ for p in $(getargs ip=); do
    [ "$use_bridge" != 'true' ] && \
    [ "$use_vlan" != 'true' ] && continue

+    # setup nameserver
+    namesrv="$dns1 $dns2 $(getargs nameserver)"
+    for s in $namesrv; do
+        echo nameserver $s >> /tmp/net.$netif.resolv.conf
+    done
+
    # Store config for later use
-    for i in ip srv gw mask hostname macaddr; do
+    for i in ip srv gw mask hostname macaddr dns1 dns2; do
        eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
    done > /tmp/net.$netif.override

-    case $autoconf in
-        dhcp|on|any)
-            do_dhcp -4 ;;
-        dhcp6)
-            do_dhcp -6 ;;
-        auto6)
-            do_ipv6auto ;;
-        *)
-            do_static ;;
-    esac
+    for autoopt in $(str_replace "$autoconf" "," " "); do
+        case $autoopt in
+            dhcp|on|any)
+                do_dhcp -4 ;;
+            dhcp6)
+                load_ipv6
+                do_dhcp -6 ;;
+            auto6)
+                do_ipv6auto ;;
+            *)
+                do_static ;;
+        esac
+    done
+
+    > /tmp/net.${netif}.up

    case $autoconf in
        dhcp|on|any|dhcp6)
@@ -333,6 +354,24 @@ for p in $(getargs ip=); do
            ;;
    esac

-    break
+    exit 0
 done
+
+# netif isn't the top stack? Then we should exit here.
+# eg. netif is bond0. br0 is on top of it. dhcp br0 is correct but dhcp
+#     bond0 doesn't make sense.
+if [ -n "$DO_BOND_SETUP" -o -n "$DO_TEAM_SETUP" -o -n "$DO_VLAN_SETUP" ]; then
+    exit 0
+fi
+
+# no ip option directed at our interface?
+if [ ! -e /tmp/net.${netif}.up ]; then
+    if getargs 'ip=dhcp6'; then
+        load_ipv6
+        do_dhcp -6
+    else
+        do_dhcp -4
+    fi
+fi
+
 exit 0
--- a/modules.d/40network/kill-dhclient.sh
+++ b/modules.d/40network/kill-dhclient.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 for f in /tmp/dhclient.*.pid; do
    [ -e $f ] || continue
--- a/modules.d/40network/module-setup.sh
+++ b/modules.d/40network/module-setup.sh
@@ -1,31 +1,27 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    local _program

-    for _program in ip arping dhclient ; do
-        if ! type -P $_program >/dev/null; then
-            derror "Could not find program \"$_program\" required by network."
-            return 1
-        fi
-    done
+    require_binaries ip arping dhclient || return 1

    return 255
 }

+# called by dracut
 depends() {
-    [ -d /etc/sysconfig/network-scripts/ ] && echo ifcfg
    return 0
 }

+# called by dracut
 installkernel() {
    # Include wired net drivers, excluding wireless
+    local _arch=$(uname -m)

    net_module_filter() {
-        local _net_drivers='eth_type_trans|register_virtio_device'
-        local _unwanted_drivers='/(wireless|isdn|uwb)/'
+        local _net_drivers='eth_type_trans|register_virtio_device|usbnet_open'
+        local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
        local _ret
        # subfunctions inherit following FDs
        local _merge=8 _side2=9
@@ -65,9 +61,14 @@ installkernel() {
        | net_module_filter | instmods

    #instmods() will take care of hostonly
-    instmods =drivers/net/phy ecb arc4 bridge stp llc ipv6 bonding 8021q af_packet virtio_net =drivers/net/team
+    instmods \
+        =drivers/net/phy \
+        =drivers/net/team \
+        =drivers/net/ethernet \
+        ecb arc4 bridge stp llc ipv6 bonding 8021q af_packet virtio_net
 }

+# called by dracut
 install() {
    local _arch _i _dir
    inst_multiple ip arping dhclient sed
@@ -79,10 +80,12 @@ install() {
    inst_script "$moddir/netroot.sh" "/sbin/netroot"
    inst_script "$moddir/dhclient-script.sh" "/sbin/dhclient-script"
    inst_simple "$moddir/net-lib.sh" "/lib/net-lib.sh"
-    inst_simple "$moddir/dhclient.conf" "/etc/dhclient.conf"
+    inst_simple -H "/etc/dhclient.conf"
+    cat "$moddir/dhclient.conf" >> "${initdir}/etc/dhclient.conf"
    inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
    inst_hook pre-udev 60 "$moddir/net-genrules.sh"
    inst_hook cmdline 91 "$moddir/dhcp-root.sh"
+    inst_hook cmdline 92 "$moddir/parse-ibft.sh"
    inst_hook cmdline 95 "$moddir/parse-vlan.sh"
    inst_hook cmdline 96 "$moddir/parse-bond.sh"
    inst_hook cmdline 96 "$moddir/parse-team.sh"
--- a/modules.d/40network/net-genrules.sh
+++ b/modules.d/40network/net-genrules.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 getargbool 0 rd.neednet && NEEDNET=1

@@ -16,7 +14,7 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh
    # bridge: attempt only the defined interface
    if [ -e /tmp/bridge.info ]; then
        . /tmp/bridge.info
-        IFACES="$IFACES ${ethnames%% *}"
+        IFACES="$IFACES ${bridgeslaves%% *}"
        MASTER_IFACES="$MASTER_IFACES $bridgename"
    fi

@@ -54,23 +52,30 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh
    ifup='/sbin/ifup $env{INTERFACE}'
    [ -z "$netroot" ] && ifup="$ifup -m"

-    runcmd="RUN+=\"/sbin/initqueue --onetime $ifup\""
+    runcmd="RUN+=\"/sbin/initqueue --name ifup-\$env{INTERFACE} --unique --onetime $ifup\""

    # We have some specific interfaces to handle
    if [ -n "$IFACES" ]; then
        echo 'SUBSYSTEM!="net", GOTO="net_end"'
-        echo 'ACTION=="remove", GOTO="net_end"'
+        echo 'ACTION!="add|change|move", GOTO="net_end"'
        for iface in $IFACES; do
            case "$iface" in
                ??:??:??:??:??:??)  # MAC address
-                    cond="ATTR{address}==\"$iface\"" ;;
+                    cond="ATTR{address}==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
                ??-??-??-??-??-??)  # MAC address in BOOTIF form
-                    cond="ATTR{address}==\"$(fix_bootif $iface)\"" ;;
+                    cond="ATTR{address}==\"$(fix_bootif $iface)\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
                *)                  # an interface name
-                    cond="ENV{INTERFACE}==\"$iface\"" ;;
+                    cond="ENV{INTERFACE}==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    cond="NAME==\"$iface\""
+                    echo "$cond, $runcmd, GOTO=\"net_end\""
+                    ;;
            esac
            # The GOTO prevents us from trying to ifup the same device twice
-            echo "$cond, $runcmd, GOTO=\"net_end\""
        done
        echo 'LABEL="net_end"'

@@ -82,7 +87,7 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh

        for iface in $wait_ifaces; do
            if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then
-                echo "[ -f /tmp/setup_net_${iface}.ok ]" >$hookdir/initqueue/finished/wait-$iface.sh
+                echo "[ -f /tmp/net.${iface}.did-setup ]" >$hookdir/initqueue/finished/wait-$iface.sh
            fi
        done
    # Default: We don't know the interface to use, handle all
--- a/modules.d/40network/net-lib.sh
+++ b/modules.d/40network/net-lib.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 get_ip() {
    local iface="$1" ip=""
@@ -28,30 +26,6 @@ iface_for_mac() {
    done
 }

-iface_has_link() {
-    local interface="$1" flags=""
-    [ -n "$interface" ] || return 2
-    interface="/sys/class/net/$interface"
-    [ -d "$interface" ] || return 2
-    flags=$(cat $interface/flags)
-    echo $(($flags|0x41)) > $interface/flags # 0x41: IFF_UP|IFF_RUNNING
-    [ "$(cat $interface/carrier)" = 1 ] || return 1
-    # XXX Do we need to reset the flags here? anaconda never bothered..
-}
-
-find_iface_with_link() {
-    local iface_path="" iface=""
-    for iface_path in /sys/class/net/*; do
-        iface=${iface_path##*/}
-        str_starts "$iface" "lo" && continue
-        if iface_has_link $iface; then
-            echo "$iface"
-            return 0
-        fi
-    done
-    return 1
-}
-
 # get the iface name for the given identifier - either a MAC, IP, or iface name
 iface_name() {
    case $1 in
@@ -106,12 +80,17 @@ ifdown() {
    ip addr flush dev $netif
    echo "#empty" > /etc/resolv.conf
    rm -f -- /tmp/net.$netif.did-setup
+    [ -e /sys/class/net/$netif/address ] && \
+        rm -f -- /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
    # TODO: send "offline" uevent?
 }

 setup_net() {
    local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES=""
+    local _p
    [ -e /tmp/net.$netif.did-setup ] && return
+    [ -e /sys/class/net/$netif/address ] && \
+        [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && return
    [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
    [ -z "$IFACES" ] && IFACES="$netif"
    # run the scripts written by ifup
@@ -123,6 +102,20 @@ setup_net() {
    [ -e /tmp/net.$netif.resolv.conf ] && \
        cp -f /tmp/net.$netif.resolv.conf /etc/resolv.conf

+    # add static route
+    for _p in $(getargs rd.route); do
+        route_to_var "$_p" || continue
+        [ -n "$route_dev" ] && [ "$route_dev" != "$netif" ] && continue
+        ip route add "$route_mask" ${route_gw:+via "$route_gw"} ${route_dev:+dev "$route_dev"}
+        if strstr ":" "$route_mask"; then
+            printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
+                > /tmp/net.route6."$netif"
+        else
+            printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
+                > /tmp/net.route."$netif"
+        fi
+    done
+
    # Handle STP Timeout: arping the default gateway.
    # (or the root server, if a) it's local or b) there's no gateway.)
    # Note: This assumes that if no router is present the
@@ -147,12 +140,14 @@ setup_net() {
        read layer2 < /sys/class/net/$netif/device/layer2
    fi

-    if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! arping -q -f -w 60 -I $netif $dest ; then
-        info "Resolving $dest via ARP on $netif failed"
+    if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! strstr "$dest" ":"; then
+        arping -q -f -w 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed"
    fi
    unset layer2

    > /tmp/net.$netif.did-setup
+    [ -e /sys/class/net/$netif/address ] && \
+        > /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
 }

 save_netinfo() {
@@ -203,11 +198,14 @@ fix_bootif() {
 }

 ibft_to_cmdline() {
-    local iface="" mac="" dev=""
-    local dhcp="" ip="" gw="" mask="" hostname=""
+    local iface=""
    modprobe -q iscsi_ibft
    (
        for iface in /sys/firmware/ibft/ethernet*; do
+            local mac="" dev=""
+            local dhcp="" ip="" gw="" mask="" hostname=""
+            local dns1 dns2
+
            [ -e ${iface}/mac ] || continue
            mac=$(read a < ${iface}/mac; echo $a)
            [ -z "$mac" ] && continue
@@ -216,10 +214,6 @@ ibft_to_cmdline() {
            [ -e /tmp/net.${dev}.has_ibft_config ] && continue

            [ -e ${iface}/dhcp ] && dhcp=$(read a < ${iface}/dhcp; echo $a)
-            if [ -e ${iface}/vlan ]; then
-               vlan=$(read a < ${iface}/vlan; echo $a)
-                echo "vlan=$vlan:$dev"
-            fi

            if [ -n "$dhcp" ]; then
                echo "ip=$dev:dhcp"
@@ -229,9 +223,11 @@ ibft_to_cmdline() {
                [ "$ip" = "0.0.0.0" ] && continue
                [ -e ${iface}/gateway ] && gw=$(read a < ${iface}/gateway; echo $a)
                [ -e ${iface}/subnet-mask ] && mask=$(read a < ${iface}/subnet-mask; echo $a)
+                [ -e ${iface}/primary-dns ] && dns1=$(read a < ${iface}/primary-dns; echo $a)
+                [ -e ${iface}/secondary-dns ] && dns2=$(read a < ${iface}/secondary-dns; echo $a)
                [ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a)
                if [ -n "$ip" ] && [ -n "$mask" ]; then
-                    echo "ip=$ip::$gw:$mask:$hostname:$dev:none"
+                    echo "ip=$ip::$gw:$mask:$hostname:$dev:none${dns1:+:$dns1}${dns2:+:$dns2}"
                else
                    warn "${iface} does not contain a valid iBFT configuration"
                    warn "ip-addr=$ip"
@@ -244,11 +240,28 @@ ibft_to_cmdline() {
                ls -l ${iface} | vinfo
            fi

-            echo $mac > /tmp/net.${dev}.has_ibft_config
+            if [ -e ${iface}/vlan ]; then
+                vlan=$(read a < ${iface}/vlan; echo $a)
+                if [ "$vlan" -ne "0" ]; then
+                    case "$vlan" in
+                        [0-9]*)
+                            echo "vlan=$dev.$vlan:$dev"
+                            echo $mac > /tmp/net.${dev}.${vlan}.has_ibft_config
+                            ;;
+                        *)
+                            echo "vlan=$vlan:$dev"
+                            echo $mac > /tmp/net.${vlan}.has_ibft_config
+                            ;;
+                    esac
+                else
+                    echo $mac > /tmp/net.${dev}.has_ibft_config
+                fi
+            else
+                echo $mac > /tmp/net.${dev}.has_ibft_config
+            fi
+
        done
    ) >> /etc/cmdline.d/40-ibft.conf
-    # reread cmdline
-    unset CMDLINE
 }

 parse_iscsi_root()
@@ -256,66 +269,63 @@ parse_iscsi_root()
    local v
    v=${1#iscsi:}

-# extract authentication info
+    # extract authentication info
    case "$v" in
-	*@*:*:*:*:*)
-	    authinfo=${v%%@*}
-	    v=${v#*@}
-    # allow empty authinfo to allow having an @ in iscsi_target_name like this:
-    # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
-	    if [ -n "$authinfo" ]; then
-		OLDIFS="$IFS"
-		IFS=:
-		set $authinfo
-		IFS="$OLDIFS"
-		if [ $# -gt 4 ]; then
-		    warn "Wrong authentication info in iscsi: parameter!"
-		    return 1
-		fi
-		iscsi_username=$1
-		iscsi_password=$2
-		if [ $# -gt 2 ]; then
-		    iscsi_in_username=$3
-		    iscsi_in_password=$4
-		fi
-	    fi
-	    ;;
+        *@*:*:*:*:*)
+            authinfo=${v%%@*}
+            v=${v#*@}
+            # allow empty authinfo to allow having an @ in iscsi_target_name like this:
+            # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
+            if [ -n "$authinfo" ]; then
+                OLDIFS="$IFS"
+                IFS=:
+                set $authinfo
+                IFS="$OLDIFS"
+                if [ $# -gt 4 ]; then
+                    warn "Wrong authentication info in iscsi: parameter!"
+                    return 1
+                fi
+                iscsi_username=$1
+                iscsi_password=$2
+                if [ $# -gt 2 ]; then
+                    iscsi_in_username=$3
+                    iscsi_in_password=$4
+                fi
+            fi
+            ;;
    esac

-# extract target ip
+    # extract target ip
    case "$v" in
-	[[]*[]]:*)
-	    iscsi_target_ip=${v#[[]}
-		iscsi_target_ip=${iscsi_target_ip%%[]]*}
-	    v=${v#[[]$iscsi_target_ip[]]:}
-	    ;;
-	*)
-	    iscsi_target_ip=${v%%[:]*}
-	    v=${v#$iscsi_target_ip:}
-	    ;;
+        [[]*[]]:*)
+            iscsi_target_ip=${v#[[]}
+                iscsi_target_ip=${iscsi_target_ip%%[]]*}
+            v=${v#[[]$iscsi_target_ip[]]:}
+            ;;
+        *)
+            iscsi_target_ip=${v%%[:]*}
+            v=${v#$iscsi_target_ip:}
+            ;;
    esac

-# extract target name
+    unset iscsi_target_name
+    # extract target name
    case "$v" in
-	*:iqn.*)
-	    iscsi_target_name=iqn.${v##*:iqn.}
-	    v=${v%:iqn.*}:
-	    ;;
-	*:eui.*)
-	    iscsi_target_name=iqn.${v##*:eui.}
-	    v=${v%:iqn.*}:
-	    ;;
-	*:naa.*)
-	    iscsi_target_name=iqn.${v##*:naa.}
-	    v=${v%:iqn.*}:
-	    ;;
-	*)
-	    warn "Invalid iscii target name, should begin with 'iqn.' or 'eui.' or 'naa.'"
-	    return 1
-	    ;;
+        *:iqn.*)
+            iscsi_target_name=iqn.${v##*:iqn.}
+            v=${v%:iqn.*}:
+            ;;
+        *:eui.*)
+            iscsi_target_name=eui.${v##*:eui.}
+            v=${v%:eui.*}:
+            ;;
+        *:naa.*)
+            iscsi_target_name=naa.${v##*:naa.}
+            v=${v%:naa.*}:
+            ;;
    esac

-# parse the rest
+    # parse the rest
    OLDIFS="$IFS"
    IFS=:
    set $v
@@ -323,17 +333,34 @@ parse_iscsi_root()

    iscsi_protocol=$1; shift # ignored
    iscsi_target_port=$1; shift
-    if [ $# -eq 3 ]; then
-	iscsi_iface_name=$1; shift
+
+    if [ -n "$iscsi_target_name" ]; then
+        if [ $# -eq 3 ]; then
+            iscsi_iface_name=$1; shift
+        fi
+        if [ $# -eq 2 ]; then
+            iscsi_netdev_name=$1; shift
+        fi
+        iscsi_lun=$1; shift
+        if [ $# -ne 0 ]; then
+            warn "Invalid parameter in iscsi: parameter!"
+            return 1
+        fi
+        return 0
    fi
-    if [ $# -eq 2 ]; then
-	iscsi_netdev_name=$1; shift
+
+
+    if [ $# -gt 3 ] && [ -n "$1$2" ]; then
+        if [ -z "$3" ] || [ "$3" -ge 0 ]  2>/dev/null ; then
+            iscsi_iface_name=$1; shift
+            iscsi_netdev_name=$1; shift
+        fi
    fi
+
    iscsi_lun=$1; shift
-    if [ $# -ne 0 ]; then
-	warn "Invalid parameter in iscsi: parameter!"
-	return 1
-    fi
+
+    iscsi_target_name=$(printf "%s:" "$@")
+    iscsi_target_name=${iscsi_target_name%:}
 }

 ip_to_var() {
@@ -353,7 +380,7 @@ ip_to_var() {
        fi
    done

-    unset ip srv gw mask hostname dev autoconf macaddr mtu
+    unset ip srv gw mask hostname dev autoconf macaddr mtu dns1 dns2
    case $# in
        0)  autoconf="error" ;;
        1)  autoconf=$1 ;;
@@ -361,17 +388,28 @@ ip_to_var() {
        3)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2; [ -n "$3" ] && mtu=$3 ;;
        4)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2; [ -n "$3" ] && mtu=$3; [ -n "$4" ] && macaddr=$4 ;;
        *)  [ -n "$1" ] && ip=$1; [ -n "$2" ] && srv=$2; [ -n "$3" ] && gw=$3; [ -n "$4" ] && mask=$4;
-            [ -n "$5" ] && hostname=$5; [ -n "$6" ] && dev=$6; [ -n "$7" ] && autoconf=$7; [ -n "$8" ] && mtu=$8;
-            if [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
-                macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
-            fi
-	    ;;
+            [ -n "$5" ] && hostname=$5; [ -n "$6" ] && dev=$6; [ -n "$7" ] && autoconf=$7;
+            case "$8" in
+                [0-9]*:*|[0-9]*.[0-9]*.[0-9]*.[0-9]*)
+                    dns1="$8"
+                    [ -n "$9" ] && dns2="$9"
+                    ;;
+                [0-9]*)
+                    mtu="$8"
+                    ;;
+                *)
+                    if [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
+                        macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
+                    fi
+                    ;;
+            esac
+            ;;
    esac

    # ip=<ipv4-address> means anaconda-style static config argument cluster:
    # ip=<ip> gateway=<gw> netmask=<nm> hostname=<host> mtu=<mtu>
    # ksdevice={link|bootif|ibft|<MAC>|<ifname>}
-    if strstr "$autoconf" "*.*.*.*"; then
+    if strglob "$autoconf" "*.*.*.*"; then
        ip="$autoconf"
        gw=$(getarg gateway=)
        mask=$(getarg netmask=)
@@ -389,6 +427,33 @@ ip_to_var() {
    fi
 }

+route_to_var() {
+    local v=${1}:
+    local i
+    set --
+    while [ -n "$v" ]; do
+        if [ "${v#\[*:*:*\]:}" != "$v" ]; then
+            # handle IPv6 address
+            i="${v%%\]:*}"
+            i="${i##\[}"
+            set -- "$@" "$i"
+            v=${v#\[$i\]:}
+        else
+            set -- "$@" "${v%%:*}"
+            v=${v#*:}
+        fi
+    done
+
+    unset route_mask route_gw route_dev
+    case $# in
+        2)  [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"
+            return 0;;
+        3)  [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"; [ -n "$3" ] && route_dev="$3"
+            return 0;;
+        *)  return 1;;
+    esac
+}
+
 parse_ifname_opts() {
    local IFS=:
    set $1
@@ -433,7 +498,7 @@ wait_for_if_up() {
    local li
    while [ $cnt -lt 200 ]; do
        li=$(ip -o link show up dev $1)
-        [ -n "$li" ] && return 0
+        [ -n "$li" ] && [ -z "${li##*state UP*}" ] && return 0
        sleep 0.1
        cnt=$(($cnt+1))
    done
@@ -451,12 +516,26 @@ wait_for_route_ok() {
    return 1
 }

+wait_for_ipv6_dad() {
+    local cnt=0
+    local li
+    while [ $cnt -lt 500 ]; do
+        li=$(ip -6 addr show dev $1)
+        strstr "$li" "tentative" || return 0
+        sleep 0.1
+        cnt=$(($cnt+1))
+    done
+    return 1
+}
+
 wait_for_ipv6_auto() {
    local cnt=0
    local li
    while [ $cnt -lt 400 ]; do
        li=$(ip -6 addr show dev $1)
-        strstr "$li" "dynamic" && return 0
+        if ! strstr "$li" "tentative"; then
+            strstr "$li" "dynamic" && return 0
+        fi
        sleep 0.1
        cnt=$(($cnt+1))
    done
@@ -470,6 +549,95 @@ linkup() {
 }

 type hostname >/dev/null 2>&1 || \
-hostname() {
-	cat /proc/sys/kernel/hostname
+    hostname() {
+    cat /proc/sys/kernel/hostname
+}
+
+iface_has_link() {
+    local interface="$1" flags=""
+    [ -n "$interface" ] || return 2
+    interface="/sys/class/net/$interface"
+    [ -d "$interface" ] || return 2
+    linkup "$1"
+    [ "$(cat $interface/carrier)" = 1 ] || return 1
+    # XXX Do we need to reset the flags here? anaconda never bothered..
+}
+
+find_iface_with_link() {
+    local iface_path="" iface=""
+    for iface_path in /sys/class/net/*; do
+        iface=${iface_path##*/}
+        str_starts "$iface" "lo" && continue
+        if iface_has_link $iface; then
+            echo "$iface"
+            return 0
+        fi
+    done
+    return 1
+}
+
+is_persistent_ethernet_name() {
+    local _netif="$1"
+    local _name_assign_type="0"
+
+    [ -f "/sys/class/net/$_netif/name_assign_type" ] \
+        && _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
+
+    # NET_NAME_ENUM 1
+    [ "$_name_assign_type" = "1" ] && return 1
+
+    # NET_NAME_PREDICTABLE 2
+    [ "$_name_assign_type" = "2" ] && return 0
+
+    case "$_netif" in
+        # udev persistent interface names
+        eno[0-9]|eno[0-9][0-9]|eno[0-9][0-9][0-9]*)
+            ;;
+        ens[0-9]|ens[0-9][0-9]|ens[0-9][0-9][0-9]*)
+            ;;
+        enp[0-9]s[0-9]*|enp[0-9][0-9]s[0-9]*|enp[0-9][0-9][0-9]*s[0-9]*)
+            ;;
+        enP*p[0-9]s[0-9]*|enP*p[0-9][0-9]s[0-9]*|enP*p[0-9][0-9][0-9]*s[0-9]*)
+            ;;
+        # biosdevname
+        em[0-9]|em[0-9][0-9]|em[0-9][0-9][0-9]*)
+            ;;
+        p[0-9]p[0-9]*|p[0-9][0-9]p[0-9]*|p[0-9][0-9][0-9]*p[0-9]*)
+            ;;
+        *)
+            return 1
+    esac
+    return 0
+}
+
+is_kernel_ethernet_name() {
+    local _netif="$1"
+    local _name_assign_type="1"
+
+    if [ -e "/sys/class/net/$_netif/name_assign_type" ]; then
+        _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
+
+        case "$_name_assign_type" in
+            2|3|4)
+                # NET_NAME_PREDICTABLE 2
+                # NET_NAME_USER 3
+                # NET_NAME_RENAMED 4
+                return 1
+                ;;
+            1|*)
+                # NET_NAME_ENUM 1
+                return 0
+                ;;
+        esac
+    fi
+
+    # fallback to error prone manual name check
+    case "$_netif" in
+        eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]*)
+            return 0
+            ;;
+        *)
+            return 1
+    esac
+
 }
--- a/modules.d/40network/netroot.sh
+++ b/modules.d/40network/netroot.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 PATH=/usr/sbin:/usr/bin:/sbin:/bin
 command -v getarg >/dev/null    || . /lib/dracut-lib.sh
@@ -51,6 +49,7 @@ if [ -z "$2" ]; then
        netroot=$new_root_path

        # FIXME!
+        unset rootok
        for f in $hookdir/cmdline/90*.sh; do
            [ -f "$f" ] && . "$f";
        done
--- a/modules.d/40network/parse-bridge.sh
+++ b/modules.d/40network/parse-bridge.sh
@@ -1,11 +1,9 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Format:
-#       bridge=<bridgename>:<ethnames>
+#       bridge=<bridgename>:<bridgeslaves>
 #
-#       <ethnames> is a comma-separated list of physical (ethernet) interfaces
+#       <bridgeslaves> is a comma-separated list of physical (ethernet) interfaces
 #       bridge without parameters assumes bridge=br0:eth0
 #

@@ -25,20 +23,20 @@ parsebridge() {
        v=${v#*:}
    done

-    unset bridgename ethnames
+    unset bridgename bridgeslaves
    case $# in
-        0)  bridgename=br0; ethnames=$iface ;;
+        0)  bridgename=br0; bridgeslaves=$iface ;;
        1)  die "bridge= requires two parameters" ;;
-        2)  bridgename=$1; ethnames=$(str_replace "$2" "," " ") ;;
+        2)  bridgename=$1; bridgeslaves=$(str_replace "$2" "," " ") ;;
        *)  die "bridge= requires two parameters" ;;
    esac
 }

-unset bridgename ethnames
+unset bridgename bridgeslaves

 iface=eth0

-# Parse bridge for bridgename and ethnames
+# Parse bridge for bridgename and bridgeslaves
 if bridge="$(getarg bridge)"; then
    # Read bridge= parameters if they exist
    if [ -n "$bridge" ]; then
@@ -47,9 +45,9 @@ if bridge="$(getarg bridge)"; then
    # Simple default bridge
    if [ -z "$bridgename" ]; then
        bridgename=br0
-        ethnames=$iface
+        bridgeslaves=$iface
    fi
    echo "bridgename=$bridgename" > /tmp/bridge.info
-    echo "ethnames=\"$ethnames\"" >> /tmp/bridge.info
+    echo "bridgeslaves=\"$bridgeslaves\"" >> /tmp/bridge.info
    return
 fi
--- a/modules.d/40network/parse-ibft.sh
+++ b/modules.d/40network/parse-ibft.sh
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+command -v getarg >/dev/null          || . /lib/dracut-lib.sh
+command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
+
+if getargbool 0 rd.iscsi.ibft -d "ip=ibft"; then
+    ibft_to_cmdline
+fi
--- a/modules.d/40network/parse-ifname.sh
+++ b/modules.d/40network/parse-ifname.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Format:
 #       ifname=<interface>:<mac>
--- a/modules.d/40network/parse-ip-opts.sh
+++ b/modules.d/40network/parse-ip-opts.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Format:
 #       ip=[dhcp|on|any]
@@ -15,7 +13,6 @@
 #

 command -v getarg >/dev/null          || . /lib/dracut-lib.sh
-command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh

 if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] && [ -z "$(getarg BOOTIF=)" ]; then
    # No ip= argument(s) for netroot provided, defaulting to DHCP
@@ -26,6 +23,10 @@ fi
 if [ -z "$NEEDBOOTDEV" ] ; then
    count=0
    for p in $(getargs ip=); do
+        case "$p" in
+            ibft)
+                continue;;
+        esac
        count=$(( $count + 1 ))
    done
    [ $count -gt 1 ] && NEEDBOOTDEV=1
@@ -39,9 +40,6 @@ if [ -n "$NEEDBOOTDEV" ] ; then
    [ -z "$BOOTDEV" ] && warn "Please supply bootdev argument for multiple ip= lines"
 fi

-# If ibft is requested, read ibft vals and write ip=XXX cmdline args
-[ "ibft" = "$(getarg ip=)" ] && ibft_to_cmdline
-
 # Check ip= lines
 # XXX Would be nice if we could errorcheck ip addresses here as well
 for p in $(getargs ip=); do
@@ -66,24 +64,26 @@ for p in $(getargs ip=); do
    fi

    # Error checking for autoconf in combination with other values
-    case $autoconf in
-        error) die "Error parsing option 'ip=$p'";;
-        bootp|rarp|both) die "Sorry, ip=$autoconf is currenty unsupported";;
-        none|off)
-            [ -z "$ip" ] && \
-            die "For argument 'ip=$p'\nValue '$autoconf' without static configuration does not make sense"
-            [ -z "$mask" ] && \
-                die "Sorry, automatic calculation of netmask is not yet supported"
-            ;;
-        auto6);;
-        dhcp|dhcp6|on|any) \
-            [ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
-            die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
-            [ -n "$ip" ] && \
-                die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoconf'"
-            ;;
-        *) die "For argument 'ip=$p'\nSorry, unknown value '$autoconf'";;
-    esac
+    for autoopt in $(str_replace "$autoconf" "," " "); do
+        case $autoopt in
+            error) die "Error parsing option 'ip=$p'";;
+            bootp|rarp|both) die "Sorry, ip=$autoopt is currenty unsupported";;
+            none|off)
+                [ -z "$ip" ] && \
+                    die "For argument 'ip=$p'\nValue '$autoopt' without static configuration does not make sense"
+                [ -z "$mask" ] && \
+                    die "Sorry, automatic calculation of netmask is not yet supported"
+                ;;
+            auto6);;
+            dhcp|dhcp6|on|any) \
+                [ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
+                    die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
+                [ -n "$ip" ] && \
+                    die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoopt'"
+                ;;
+            *) die "For argument 'ip=$p'\nSorry, unknown value '$autoopt'";;
+        esac
+    done

    if [ -n "$dev" ] ; then
        # We don't like duplicate device configs
@@ -112,7 +112,7 @@ for p in $(getargs ip=); do
 done

 # put BOOTIF in IFACES to make sure it comes up
-if BOOTIF="$(getarg BOOTIF=)"; then
+if getargbool 1 "rd.bootif" && BOOTIF="$(getarg BOOTIF=)"; then
    BOOTDEV=$(fix_bootif $BOOTIF)
    IFACES="$BOOTDEV $IFACES"
 fi
--- a/modules.d/40network/parse-vlan.sh
+++ b/modules.d/40network/parse-vlan.sh
--- a/modules.d/45ifcfg/module-setup.sh
+++ b/modules.d/45ifcfg/module-setup.sh
@@ -1,15 +1,18 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
+    [[ -d /etc/sysconfig/network-scripts ]] && return 0
    return 255
 }

+# called by dracut
 depends() {
+    echo "network"
    return 0
 }

+# called by dracut
 install() {
    inst_hook pre-pivot 85 "$moddir/write-ifcfg.sh"
 }
--- a/modules.d/45ifcfg/write-ifcfg.sh
+++ b/modules.d/45ifcfg/write-ifcfg.sh
@@ -1,8 +1,8 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 # NFS root might have reached here before /tmp/net.ifaces was written
+type is_persistent_ethernet_name >/dev/null 2>&1 || . /lib/net-lib.sh
+
 udevadm settle --timeout=30

 if [ -e /tmp/bridge.info ]; then
@@ -55,9 +55,9 @@ print_s390() {

    SUBCHANNELS=${SUBCHANNELS%,}
    echo "SUBCHANNELS=\"${SUBCHANNELS}\""
-    CONFIG_LINE=$(get_config_line_by_subchannel $SUBCHANNELS)

-    [ $? -ne 0 -o -z "$CONFIG_LINE" ] && return
+    CONFIG_LINE=$(get_config_line_by_subchannel $SUBCHANNELS)
+    [ $? -ne 0 -o -z "$CONFIG_LINE" ] && return 0

    OLD_IFS=$IFS
    IFS=","
@@ -77,6 +77,44 @@ print_s390() {
    OPTIONS=${OPTIONS## }
    echo "NETTYPE=\"${NETTYPE}\""
    echo "OPTIONS=\"${OPTIONS}\""
+    return 0
+}
+
+hw_bind() {
+    local _netif="$1"
+    local _macaddr="$2"
+
+    [ -n "$_macaddr" ] \
+        && echo "MACADDR=\"$_macaddr\""
+
+    print_s390 "$_netif" \
+        && return 0
+
+    [ -n "$_macaddr" ] && return 0
+
+    is_persistent_ethernet_name "$_netif" && return 0
+
+    [ -f "/sys/class/net/$_netif/addr_assign_type" ] \
+        && [ "$(cat "/sys/class/net/$_netif/addr_assign_type")" != "0" ] \
+        && return 1
+
+    [ -f "/sys/class/net/$_netif/address" ] \
+        || return 1
+
+    echo "HWADDR=\"$(cat /sys/class/net/$_netif/address)\""
+}
+
+interface_bind() {
+    local _netif="$1"
+    local _macaddr="$2"
+
+    # see, if we can bind it to some hw parms
+    if hw_bind "$_netif" "$_macaddr"; then
+        # only print out DEVICE, if it's user assigned
+        is_kernel_ethernet_name "$_netif" && return 0
+    fi
+
+    echo "DEVICE=\"$_netif\""
 }

 for netup in /tmp/net.*.did-setup ; do
@@ -84,6 +122,7 @@ for netup in /tmp/net.*.did-setup ; do

    netif=${netup%%.did-setup}
    netif=${netif##*/net.}
+    strglobin "$netif" ":*:*:*:*:" && continue
    [ -e /tmp/ifcfg/ifcfg-$netif ] && continue
    unset bridge
    unset bond
@@ -110,16 +149,17 @@ for netup in /tmp/net.*.did-setup ; do
    if [ "$netif" = "$vlanname" ]; then
        vlan=yes
    fi
-    cat /sys/class/net/$netif/address > /tmp/net.$netif.hwaddr
+
    {
        echo "# Generated by dracut initrd"
-        echo "DEVICE=\"$netif\""
+        echo "NAME=\"$netif\""
+        interface_bind "$netif" "$macaddr"
        echo "ONBOOT=yes"
        echo "NETBOOT=yes"
        echo "UUID=\"$uuid\""
+        strstr "$(ip -6 addr show dev $netif)" 'inet6' && echo "IPV6INIT=yes"
        if [ -f /tmp/dhclient.$netif.lease ]; then
            [ -f /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
-            strstr "$ip" '*:*:*' && echo "IPV6INIT=yes"
            if [ -f /tmp/net.$netif.has_ibft_config ]; then
                echo "BOOTPROTO=ibft"
            else
@@ -129,7 +169,7 @@ for netup in /tmp/net.*.did-setup ; do
        else
            # If we've booted with static ip= lines, the override file is there
            [ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override
-            if strstr "$ip" '*:*:*'; then
+            if strglobin "$ip" '*:*:*'; then
                echo "IPV6INIT=yes"
                echo "IPV6_AUTOCONF=no"
                echo "IPV6ADDR=\"$ip/$mask\""
@@ -146,7 +186,7 @@ for netup in /tmp/net.*.did-setup ; do
                    fi
                fi
            fi
-            if strstr "$gw" '*:*:*'; then
+            if strglobin "$gw" '*:*:*'; then
                echo "IPV6_DEFAULTGW=\"$gw\""
            elif [ -n "$gw" ]; then
                echo "GATEWAY=\"$gw\""
@@ -159,14 +199,7 @@ for netup in /tmp/net.*.did-setup ; do
    if [ -z "$bridge" ] && [ -z "$bond" ] && [ -z "$vlan" ]; then
        # standard interface
        {
-            if [ -n "$macaddr" ]; then
-                echo "MACADDR=\"$macaddr\""
-            else
-                echo "HWADDR=\"$(cat /sys/class/net/$netif/address)\""
-            fi
-            print_s390 $netif
            echo "TYPE=Ethernet"
-            echo "NAME=\"$netif\""
            [ -n "$mtu" ] && echo "MTU=\"$mtu\""
        } >> /tmp/ifcfg/ifcfg-$netif
    fi
@@ -191,17 +224,19 @@ for netup in /tmp/net.*.did-setup ; do

        for slave in $bondslaves ; do
            # write separate ifcfg file for the raw eth interface
-            {
+            (
                echo "# Generated by dracut initrd"
-                echo "DEVICE=\"$slave\""
+                echo "NAME=\"$slave\""
                echo "TYPE=Ethernet"
                echo "ONBOOT=yes"
                echo "NETBOOT=yes"
-                echo "HWADDR=\"$(cat /sys/class/net/$slave/address)\""
                echo "SLAVE=yes"
                echo "MASTER=\"$netif\""
-                echo "NAME=\"$slave\""
-            } >> /tmp/ifcfg/ifcfg-$slave
+                echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
+                unset macaddr
+                [ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override
+                interface_bind "$slave" "$macaddr"
+            ) >> /tmp/ifcfg/ifcfg-$slave
        done
    fi

@@ -211,50 +246,30 @@ for netup in /tmp/net.*.did-setup ; do
            echo "TYPE=Bridge"
            echo "NAME=\"$netif\""
        } >> /tmp/ifcfg/ifcfg-$netif
-        if [ "$ethname" = "$bondname" ] ; then
-            {
-                echo "# Generated by dracut initrd"
-                echo "DEVICE=\"$bondname\""
-                echo "ONBOOT=yes"
-                echo "NETBOOT=yes"
-                # This variable is an indicator of a bond interface for initscripts
-                echo "BONDING_OPTS=\"$bondoptions\""
-                echo "BRIDGE=\"$netif\""
-                echo "NAME=\"$bondname\""
-            } >> /tmp/ifcfg/ifcfg-$bondname
-            for slave in $bondslaves ; do
-                # write separate ifcfg file for the raw eth interface
-                {
-                    echo "# Generated by dracut initrd"
-                    echo "DEVICE=\"$slave\""
-                    echo "TYPE=Ethernet"
-                    echo "ONBOOT=yes"
-                    echo "NETBOOT=yes"
-                    echo "HWADDR=\"$(cat /sys/class/net/$slave/address)\""
-                    echo "SLAVE=yes"
-                    echo "MASTER=\"$bondname\""
-                    echo "NAME=\"$slave\""
-                } >> /tmp/ifcfg/ifcfg-$slave
-            done
-        else
+        for slave in $bridgeslaves ; do
            # write separate ifcfg file for the raw eth interface
-            {
+            (
                echo "# Generated by dracut initrd"
-                echo "DEVICE=\"$ethname\""
+                echo "NAME=\"$slave\""
                echo "TYPE=Ethernet"
                echo "ONBOOT=yes"
                echo "NETBOOT=yes"
-                echo "HWADDR=\"$(cat /sys/class/net/$ethname/address)\""
-                echo "BRIDGE=\"$netif\""
-                echo "NAME=\"$ethname\""
-            } >> /tmp/ifcfg/ifcfg-$ethname
-        fi
+                echo "BRIDGE=\"$bridgename\""
+                echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
+                unset macaddr
+                [ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override
+                interface_bind "$slave" "$macaddr"
+            ) >> /tmp/ifcfg/ifcfg-$slave
+        done
    fi
    i=1
    for ns in $(getargs nameserver); do
        echo "DNS${i}=\"${ns}\"" >> /tmp/ifcfg/ifcfg-$netif
        i=$((i+1))
    done
+
+    [ -f /tmp/net.route6."$netif" ] && cp /tmp/net.route6."$netif" /tmp/ifcfg/route6-"$netif"
+    [ -f /tmp/net.route."$netif" ] && cp /tmp/net.route."$netif" /tmp/ifcfg/route-"$netif"
 done

 # Pass network opts
--- a/modules.d/45url-lib/module-setup.sh
+++ b/modules.d/45url-lib/module-setup.sh
@@ -1,19 +1,23 @@
 #!/bin/bash
 # module-setup for url-lib

+# called by dracut
 check() {
-    command -v curl >/dev/null || return 1
+    require_binaries curl || return 1
    return 255
 }

+# called by dracut
 depends() {
    echo network
    return 0
 }

+# called by dracut
 install() {
    local _dir _crt _found _lib
    inst_simple "$moddir/url-lib.sh" "/lib/url-lib.sh"
+    inst_multiple -o ctorrent
    inst_multiple curl
    # also install libs for curl https
    inst_libdir_file "libnsspem.so*"
--- a/modules.d/45url-lib/url-lib.sh
+++ b/modules.d/45url-lib/url-lib.sh
@@ -64,7 +64,7 @@ curl_fetch_url() {
    local url="$1" outloc="$2"
    echo "$url" > /proc/self/fd/0
    if [ -n "$outloc" ]; then
-        curl $curl_args --output "$outloc" -- "$url" || return $?
+        curl $curl_args --output - -- "$url" > "$outloc" || return $?
    else
        local outdir="$(mkuniqdir /tmp curl_fetch_url)"
        ( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
@@ -76,12 +76,44 @@ curl_fetch_url() {
    fi
    if [ -z "$2" ]; then echo "$outloc" ; fi
 }
-add_url_handler curl_fetch_url http https ftp
+add_url_handler curl_fetch_url http https ftp tftp

 set_http_header() {
    echo "header = \"$1: $2\"" >> $CURL_HOME/.curlrc
 }

+### TORRENT ##########################################################
+
+ctorrent_args="-E 0 -e 0"
+
+ctorrent_fetch_url() {
+    local url="$1" outloc="$2"
+    url=${url#*//}
+    torrent_outloc="$outloc.torrent"
+    echo "$url" > /proc/self/fd/0
+    if [ -n "$outloc" ]; then
+        curl $curl_args --output - -- "$url" > "$torrent_outloc" || return $?
+    else
+        local outdir="$(mkuniqdir /tmp torrent_fetch_url)"
+        ( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
+        torrent_outloc="$outdir/$(ls -A $outdir)"
+        outloc=${torrent_outloc%.*}
+    fi
+    if ! [ -f "$torrent_outloc" ]; then
+        warn "Downloading '$url' failed!"
+        return 253
+    fi
+    ctorrent $ctorrent_args -s $outloc $torrent_outloc >&2
+    if ! [ -f "$outloc" ]; then
+        warn "Torrent download of '$url' failed!"
+        return 253
+    fi
+    if [ -z "$2" ]; then echo "$outloc" ; fi
+}
+
+command -v ctorrent >/dev/null \
+    && add_url_handler ctorrent_fetch_url torrent
+
 ### NFS ##############################################################

 [ -e /lib/nfs-lib.sh ] && . /lib/nfs-lib.sh
--- a/modules.d/50drm/module-setup.sh
+++ b/modules.d/50drm/module-setup.sh
@@ -1,15 +1,16 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    return 255
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 installkernel() {
    local _modname
    # Include KMS capable drm drivers
@@ -48,13 +49,24 @@ installkernel() {
        return 0
    }

+    if [[ "$(uname -p)" == arm* ]]; then
+        # arm specific modules needed by drm
+        instmods \
+            "=drivers/gpu/drm/i2c" \
+            "=drivers/gpu/drm/panel" \
+            "=drivers/pwm" \
+            "=drivers/video/backlight" \
+            "=drivers/video/fbdev/omap2/displays-new" \
+            ${NULL}
+    fi
+
    for _modname in $(find_kernel_modules_by_path drivers/gpu/drm \
        | drm_module_filter) ; do
        # if the hardware is present, include module even if it is not currently loaded,
        # as we could e.g. be in the installer; nokmsboot boot parameter will disable
        # loading of the driver if needed
        if [[ $hostonly ]] && modinfo -F alias $_modname | sed -e 's,\?,\.,g' -e 's,\*,\.\*,g' \
-            | grep -qxf - /sys/bus/pci/devices/*/modalias 2>/dev/null; then
+            | grep -qxf - /sys/bus/{pci/devices,soc/devices/soc?}/*/modalias 2>/dev/null; then
            hostonly='' instmods $_modname
            continue
        fi
--- a/modules.d/50gensplash/gensplash-emergency.sh
+++ b/modules.d/50gensplash/gensplash-emergency.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 CDROOT=0
 . /lib/gensplash-lib.sh
--- a/modules.d/50gensplash/gensplash-newroot.sh
+++ b/modules.d/50gensplash/gensplash-newroot.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 CDROOT=0
 . /lib/gensplash-lib.sh
--- a/modules.d/50gensplash/gensplash-pretrigger.sh
+++ b/modules.d/50gensplash/gensplash-pretrigger.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 if getargbool 1 rd.splash -d -n rd_NO_SPLASH; then
    info "Starting Gentoo Splash"
--- a/modules.d/50gensplash/module-setup.sh
+++ b/modules.d/50gensplash/module-setup.sh
@@ -1,17 +1,18 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    # TODO: splash_geninitramfs
    # TODO: /usr/share/splashutils/initrd.splash
    return 255
 }

+# called by dracut
 depends() {
    return 0
 }

+# called by dracut
 install() {
    local _opts
    local _splash_theme
--- a/modules.d/50plymouth/module-setup.sh
+++ b/modules.d/50plymouth/module-setup.sh
@@ -1,23 +1,30 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

+# called by dracut
 check() {
    [[ "$mount_needs" ]] && return 1
-    type -P plymouthd >/dev/null && type -P plymouth >/dev/null
+    require_binaries plymouthd plymouth
 }

+# called by dracut
 depends() {
    echo drm
 }

+# called by dracut
 install() {
-    if grep -q nash /usr/libexec/plymouth/plymouth-populate-initrd \
-        || [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
+    PKGLIBDIR="/usr/lib/plymouth"
+    if type -P dpkg-architecture &>/dev/null; then
+        PKGLIBDIR="/usr/lib/$(dpkg-architecture -qDEB_HOST_MULTIARCH)/plymouth"
+    fi
+    [ -x /usr/libexec/plymouth/plymouth-populate-initrd ] && PKGLIBDIR="/usr/libexec/plymouth"
+
+    if grep -q nash ${PKGLIBDIR}/plymouth-populate-initrd \
+        || [ ! -x ${PKGLIBDIR}/plymouth-populate-initrd ]; then
        . "$moddir"/plymouth-populate-initrd.sh
    else
        PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
-            /usr/libexec/plymouth/plymouth-populate-initrd -t "$initdir"
+            ${PKGLIBDIR}/plymouth-populate-initrd -t "$initdir"
    fi

    inst_hook emergency 50 "$moddir"/plymouth-emergency.sh
--- a/modules.d/50plymouth/plymouth-emergency.sh
+++ b/modules.d/50plymouth/plymouth-emergency.sh
@@ -1,4 +1,3 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
 plymouth --hide-splash 2>/dev/null || :
--- a/modules.d/50plymouth/plymouth-newroot.sh
+++ b/modules.d/50plymouth/plymouth-newroot.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 if type plymouth >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
    plymouth --newroot=$NEWROOT
--- a/modules.d/50plymouth/plymouth-populate-initrd.sh
+++ b/modules.d/50plymouth/plymouth-populate-initrd.sh
@@ -1,6 +1,5 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
 PLYMOUTH_LOGO_FILE="/usr/share/pixmaps/system-logo-white.png"
 PLYMOUTH_THEME=$(plymouth-set-default-theme)

--- a/modules.d/50plymouth/plymouth-pretrigger.sh
+++ b/modules.d/50plymouth/plymouth-pretrigger.sh
@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 if type plymouthd >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
    if getargbool 1 plymouth.enable && getargbool 1 rd.plymouth -d -n rd_NO_PLYMOUTH; then
--- a/modules.d/80cms/cms-write-ifcfg.sh
+++ b/modules.d/80cms/cms-write-ifcfg.sh
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh

@@ -9,6 +7,7 @@ mkdir -m 0755 -p /run/initramfs/state/etc/sysconfig/network-scripts
 function cms_write_config()
 {
    . /tmp/cms.conf
+    SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')"
    OLDIFS=$IFS
    IFS=,
    read -a subch_array <<< "indexzero,$SUBCHANNELS"
@@ -26,7 +25,7 @@ function cms_write_config()

    IFCFGFILE=/run/initramfs/state/etc/sysconfig/network-scripts/ifcfg-$DEVICE

-    strstr "$IPADDR" '*:*:*' && ipv6=1
+    strglobin "$IPADDR" '*:*:*' && ipv6=1

 # to please NetworkManager on startup in loader before loader reconfigures net
    cat > /etc/sysconfig/network << EOF
--- a/modules.d/80cms/cmsifup.sh
+++ b/modules.d/80cms/cmsifup.sh
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh

@@ -8,7 +6,7 @@ DEVICE=$1

 . /tmp/cms.conf

-strstr "$IPADDR" '*:*:*' && ipv6=1
+strglobin "$IPADDR" '*:*:*' && ipv6=1

 if [ "$ipv6" ] && ! str_starts "$IPADDR" "["; then
    IPADDR="[$IPADDR]"
@@ -32,7 +30,6 @@ fi
 	echo "nameserver=$i"
    done
 } > /etc/cmdline.d/80-cms.conf
-unset CMDLINE

 [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
 IFACES="$IFACES $DEVICE"
--- a/modules.d/80cms/cmssetup.sh
+++ b/modules.d/80cms/cmssetup.sh
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh

 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh

@@ -44,146 +42,147 @@ function dasd_settle() {
 }

 function dasd_settle_all() {
-    for dasdccw in $(while read line; do echo ${line%%(*}; done < /proc/dasd/devices) ; do
+    for dasdccw in $(while read line; do echo "${line%%(*}"; done < /proc/dasd/devices) ; do
        if ! dasd_settle $dasdccw ; then
            echo $"Could not access DASD $dasdccw in time"
            return 1
        fi
    done
    return 0
-    }
+}

 # prints a canonocalized device bus ID for a given devno of any format
-    function canonicalize_devno()
-    {
-        case ${#1} in
-            3) echo "0.0.0${1}" ;;
-            4) echo "0.0.${1}" ;;
-            *) echo "${1}" ;;
-        esac
-        return 0
-    }
+function canonicalize_devno()
+{
+    case ${#1} in
+        3) echo "0.0.0${1}" ;;
+        4) echo "0.0.${1}" ;;
+        *) echo "${1}" ;;
+    esac
+    return 0
+}

 # read file from CMS and write it to /tmp
-    function readcmsfile() # $1=dasdport $2=filename
-    {
-        local dev
-        local numcpus
-        local devname
-        local ret=0
-        if [ $# -ne 2 ]; then return; fi
+function readcmsfile() # $1=dasdport $2=filename
+{
+    local dev
+    local numcpus
+    local devname
+    local ret=0
+    if [ $# -ne 2 ]; then return; fi
    # precondition: udevd created dasda block device node
-        if ! dasd_cio_free -d $1 ; then
-            echo $"DASD $1 could not be cleared from device blacklist"
-            return 1
-        fi
+    if ! dasd_cio_free -d $1 ; then
+        echo $"DASD $1 could not be cleared from device blacklist"
+        return 1
+    fi

-        modprobe dasd_mod dasd=$CMSDASD
-        modprobe dasd_eckd_mod
-        udevadm settle
+    modprobe dasd_mod dasd=$CMSDASD
+    modprobe dasd_eckd_mod
+    udevadm settle

    # precondition: dasd_eckd_mod driver incl. dependencies loaded,
    #               dasd_mod must be loaded without setting any DASD online
-        dev=$(canonicalize_devno $1)
-        numcpus=$(
-	    while read line; do
-	        if strstr "$line" "# processors"; then
-		    echo ${line##*:};
-		    break;
-	        fi;
-	    done < /proc/cpuinfo
-        )
+    dev=$(canonicalize_devno $1)
+    numcpus=$(
+        while read line; do
+            if strstr "$line" "# processors"; then
+                echo ${line##*:};
+                break;
+            fi;
+        done < /proc/cpuinfo
+    )

-        if [ ${numcpus} -eq 1 ]; then
-            echo 1 > /sys/bus/ccw/devices/$dev/online
-        else
-            if ! sysecho /sys/bus/ccw/devices/$dev/online 1; then
-                echo $"DASD $dev could not be set online"
-                return 1
-            fi
-            udevadm settle
-            if ! dasd_settle $dev ; then
-                echo $"Could not access DASD $dev in time"
-                return 1
-            fi
+    if [ ${numcpus} -eq 1 ]; then
+        echo 1 > /sys/bus/ccw/devices/$dev/online
+    else
+        if ! sysecho /sys/bus/ccw/devices/$dev/online 1; then
+            echo $"DASD $dev could not be set online"
+            return 1
        fi
-
        udevadm settle
-
-        devname=$(cd /sys/bus/ccw/devices/$dev/block; set -- *; [ -b /dev/$1 ] && echo $1)
-        devname=${devname:-dasda}
-
-        [[ -d /mnt ]] || mkdir /mnt
-        if cmsfs-fuse --to=UTF-8 -a /dev/$devname /mnt; then
-	    cat /mnt/$2 > /run/initramfs/$2
-            umount /mnt || umount -l /mnt
-            udevadm settle
-        else
-            echo $"Could not read conf file $2 on CMS DASD $1."
-            ret=1
+        if ! dasd_settle $dev ; then
+            echo $"Could not access DASD $dev in time"
+            return 1
        fi
+    fi

-        if ! sysecho /sys/bus/ccw/devices/$dev/online 0; then
-            echo $"DASD $dev could not be set offline again"
+    udevadm settle
+
+    devname=$(cd /sys/bus/ccw/devices/$dev/block; set -- *; [ -b /dev/$1 ] && echo $1)
+    devname=${devname:-dasda}
+
+    [[ -d /mnt ]] || mkdir /mnt
+    if cmsfs-fuse --to=UTF-8 -a /dev/$devname /mnt; then
+        cat /mnt/$2 > /run/initramfs/$2
+        umount /mnt || umount -l /mnt
+        udevadm settle
+    else
+        echo $"Could not read conf file $2 on CMS DASD $1."
+        ret=1
+    fi
+
+    if ! sysecho /sys/bus/ccw/devices/$dev/online 0; then
+        echo $"DASD $dev could not be set offline again"
        #return 1
-        fi
-        udevadm settle
+    fi
+    udevadm settle

    # unbind all dasds to unload the dasd modules for a clean start
-        ( cd /sys/bus/ccw/drivers/dasd-eckd; for i in *.*; do echo $i > unbind;done)
-        udevadm settle
-        modprobe -r dasd_eckd_mod
-        udevadm settle
-        modprobe -r dasd_diag_mod
-        udevadm settle
-        modprobe -r dasd_mod
-        udevadm settle
-        return $ret
-    }
+    ( cd /sys/bus/ccw/drivers/dasd-eckd; for i in *.*; do echo $i > unbind;done)
+    udevadm settle
+    modprobe -r dasd_eckd_mod
+    udevadm settle
+    modprobe -r dasd_diag_mod
+    udevadm settle
+    modprobe -r dasd_mod
+    udevadm settle
+    return $ret
+}

-    processcmsfile()
-    {
-        source /tmp/cms.conf
+processcmsfile()
+{
+    source /tmp/cms.conf
+    SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')"

-        if [[ $NETTYPE ]]; then
-	    (
-	        echo -n $NETTYPE,$SUBCHANNELS
-	        [[ $PORTNAME ]] && echo -n ",portname=$PORTNAME"
-	        [[ $LAYER2 ]] && echo -n ",layer2=$LAYER2"
-	        [[ "$NETTYPE" = "ctc" ]] && [[ $CTCPROT ]] && echo -n ",protocol=$CTCPROT"
-	        echo
-	    ) >> /etc/ccw.conf
+    if [[ $NETTYPE ]]; then
+        (
+            echo -n $NETTYPE,$SUBCHANNELS
+            [[ $PORTNAME ]] && echo -n ",portname=$PORTNAME"
+            [[ $LAYER2 ]] && echo -n ",layer2=$LAYER2"
+            [[ "$NETTYPE" = "ctc" ]] && [[ $CTCPROT ]] && echo -n ",protocol=$CTCPROT"
+            echo
+        ) >> /etc/ccw.conf

-	    OLDIFS=$IFS
-	    IFS=,
-	    read -a subch_array <<< "indexzero,$SUBCHANNELS"
-	    IFS=$OLDIFS
-	    devbusid=${subch_array[1]}
-            if [ "$NETTYPE" = "ctc" ]; then
-                driver="ctcm"
-            else
-                driver=$NETTYPE
-            fi
+        OLDIFS=$IFS
+        IFS=,
+        read -a subch_array <<< "indexzero,$SUBCHANNELS"
+        IFS=$OLDIFS
+        devbusid=${subch_array[1]}
+        if [ "$NETTYPE" = "ctc" ]; then
+            driver="ctcm"
+        else
+            driver=$NETTYPE
+        fi

-	    printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="%s", KERNELS=="%s", ENV{INTERFACE}=="?*", RUN+="/sbin/initqueue --onetime --unique --name cmsifup-$env{INTERFACE} /sbin/cmsifup $env{INTERFACE}"\n' "$driver" "$devbusid" > /etc/udev/rules.d/99-cms.rules
+        printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="%s", KERNELS=="%s", ENV{INTERFACE}=="?*", RUN+="/sbin/initqueue --onetime --unique --name cmsifup-$env{INTERFACE} /sbin/cmsifup $env{INTERFACE}"\n' "$driver" "$devbusid" > /etc/udev/rules.d/99-cms.rules
        # remove the default net rules
-            rm -f -- /etc/udev/rules.d/91-default-net.rules
-	    [[ -f /etc/udev/rules.d/90-net.rules ]] \
-	        || printf 'SUBSYSTEM=="net", ACTION=="online", RUN+="/sbin/initqueue --onetime --env netif=$env{INTERFACE} source_hook initqueue/online"\n' >> /etc/udev/rules.d/99-cms.rules
-            udevadm control --reload
-	    znet_cio_free
-        fi
+        rm -f -- /etc/udev/rules.d/91-default-net.rules
+        [[ -f /etc/udev/rules.d/90-net.rules ]] \
+            || printf 'SUBSYSTEM=="net", ACTION=="online", RUN+="/sbin/initqueue --onetime --env netif=$env{INTERFACE} source_hook initqueue/online"\n' >> /etc/udev/rules.d/99-cms.rules
+        udevadm control --reload
+        znet_cio_free
+    fi

-        if [[ $DASD ]]; then
-	    echo $DASD | normalize_dasd_arg > /etc/dasd.conf
-	    echo "options dasd_mod dasd=$DASD" > /etc/modprobe.d/dasd_mod.conf
-	    dasd_cio_free
-        fi
+    if [[ $DASD ]] && [[ $DASD != "none" ]]; then
+        echo $DASD | normalize_dasd_arg > /etc/dasd.conf
+        echo "options dasd_mod dasd=$DASD" > /etc/modprobe.d/dasd_mod.conf
+        dasd_cio_free
+    fi

-        unset _do_zfcp
-        for i in ${!FCP_*}; do
-	    echo "${!i}" | while read port rest; do
-                case $port in
+    unset _do_zfcp
+    for i in ${!FCP_*}; do
+        echo "${!i}" | while read port rest; do
+            case $port in
                *.*.*)
                    ;;
                *.*)
@@ -192,23 +191,23 @@ function dasd_settle_all() {
                *)
                    port="0.0.$port"
                    ;;
-                esac
-                echo $port $rest >> /etc/zfcp.conf
-            done
-	    _do_zfcp=1
+            esac
+            echo $port $rest >> /etc/zfcp.conf
        done
-        [[ $_do_zfcp ]] && zfcp_cio_free
-        unset _do_zfcp
-    }
+        _do_zfcp=1
+    done
+    [[ $_do_zfcp ]] && zfcp_cio_free
+    unset _do_zfcp
+}

-    [[ $CMSDASD ]] || CMSDASD=$(getarg "CMSDASD=")
-    [[ $CMSCONFFILE ]] || CMSCONFFILE=$(getarg "CMSCONFFILE=")
+[[ $CMSDASD ]] || CMSDASD=$(getarg "CMSDASD=")
+[[ $CMSCONFFILE ]] || CMSCONFFILE=$(getarg "CMSCONFFILE=")

 # Parse configuration
-    if [ -n "$CMSDASD" -a -n "$CMSCONFFILE" ]; then
-        if readcmsfile $CMSDASD $CMSCONFFILE; then
-            ln -s /run/initramfs/$CMSCONFFILE /tmp/$CMSCONFFILE
-            ln -s /run/initramfs/$CMSCONFFILE /tmp/cms.conf
-            processcmsfile
-        fi
+if [ -n "$CMSDASD" -a -n "$CMSCONFFILE" ]; then
+    if readcmsfile $CMSDASD $CMSCONFFILE; then
+        ln -s /run/initramfs/$CMSCONFFILE /tmp/$CMSCONFFILE
+        ln -s /run/initramfs/$CMSCONFFILE /tmp/cms.conf
+        processcmsfile
    fi
+fi
--- a/Show More
+++ b/Show More
				`@@ -0,0 +1 @@`
				`kate: space-indent on; tab-width 4; indent-width 4; replace-tabs on; eol unix;`
				`@@ -0,0 +1 @@`
				`kate: space-indent on; tab-width 8; indent-width 8; replace-tabs on; eol unix;`