Update AUTHORS, NEWS

It is only installed on RHEL 8+, but as noted in the first commit
that tried to do this - 0bb9a683 - we already have branches for
all RHEL releases, so there's no point keeping such a conditional
on the master branch. After 0bb9a683, 51-dracut-rescue-postinst.sh
was re-added because Fedora 30 needed it, with a FIXME saying to
remove it after F30 was released. But instead of that happening, it
got changed to a conditional to install it on Fedora <= 30 or RHEL
<= 8 in 9e68789d and the FIXME was removed, then in 9eb1d1ed that
conditional was simplified to only refer to RHEL, so we wound up
with this situation.

Note the last two commits were never ported to the RHEL-8 branch,
so it's broken, I will send a separate PR for that.

Signed-off-by: Adam Williamson <awilliam@redhat.com>

.dir-locals.el

@@ -0,0 +1,7 @@
+;;; Directory Local Variables
+;;; For more information see (info "(emacs) Directory Variables")
+
+((sh-mode
+  (indent-tabs-mode)
+  (sh-basic-offset . 4)))
+

.github/CODE_OF_CONDUCT.md

@@ -0,0 +1,56 @@
+# Dracut Code of Conduct
+
+This code of conduct outlines our expectations for participants within the Dracut community, as well as steps for reporting unacceptable behavior.
+We are committed to providing a welcoming and inspiring community for all and expect our code of conduct to be honored. 
+Anyone who violates this code of conduct may be banned from the community.
+
+## Our Pledge
+
+We as members, contributors, and leaders pledge to make participation in our community a harassment-free experience for everyone, regardless of age, body size, visible or invisible disability, ethnicity, sex characteristics, gender identity and expression, level of experience, education, socio-economic status, nationality, personal appearance, race, religion, or sexual identity and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming, diverse, inclusive, and healthy community.
+
+## Our Standards
+
+Examples of behavior that contributes to a positive environment for our community include:
+
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes, and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the overall community
+
+Examples of unacceptable behavior include:
+
+* The use of sexualized language or imagery, and sexual attention or advances of any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others’ private information, such as a physical or email address, without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a professional setting
+
+## Our Responsibilities
+
+Project maintainers are responsible for clarifying and enforcing our standards of acceptable behavior and will take appropriate and fair corrective action in response to any behavior that they deem inappropriate, threatening, offensive, or harmful.
+
+Project maintainers have the right and responsibility to remove, edit, or reject comments, commits, code, wiki edits, issues, and other contributions that are not aligned to this Code of Conduct, and will communicate reasons for moderation decisions when appropriate.
+
+## Scope
+
+This Code of Conduct applies within all community spaces, and also applies when an individual is officially representing the community in public spaces. Examples of representing our community include using an official e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be reported to the project maintainer responsible for enforcement Harald Hoyer <harald@redhat.com>. 
+All complaints will be reviewed and investigated promptly and fairly and will result in a response that is deemed necessary and appropriate to the circumstances.
+Project maintainers are obligated to respect the privacy and security of the reporter of any incident.
+Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 2.0, available at https://www.contributor-covenant.org/version/2/0/code_of_conduct.html
+
+[homepage]: https://www.contributor-covenant.org
+
+For answers to common questions about this code of conduct, see the FAQ at https://www.contributor-covenant.org/faq. 
+Translations are available at https://www.contributor-covenant.org/translations.

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,26 @@
+---
+name: "\U0001F41B Bug report"
+about: A report of an error in a recent Dracut version
+labels: 'bug'
+---
+
+**Describe the bug**
+A clear and concise description of what the error is.
+
+**Distribution used**
+Which distribution was this behaviour seen in?
+
+**Dracut version**
+Which dracut version was this behaviour seen in?
+
+**Init system**
+Which init system is being used?
+
+**To Reproduce**
+Steps or code to reproduce the behavior.
+
+**Expected behavior**
+A clear and concise description of what you expected to happen.
+
+**Additional context**
+Add any other context you like about the problem here.

.github/ISSUE_TEMPLATE/documentation.md

@@ -0,0 +1,8 @@
+---
+name: "\U0001F4D6 Documentation"
+about: Suggest an improvement for documentation in Dracut
+labels: 'documents'
+---
+
+**Describe the documentation**
+A clear and concise description of what should be better documented.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,8 @@
+---
+name: "\U00002728 Feature Request"
+about: A request for enhancement in Dracut
+labels: 'enhancement'
+---
+
+**Describe the enhancement**
+A clear and concise description of what the enhancement is that you would like to see.

.github/SECURITY.md

@@ -0,0 +1,3 @@
+Security is very important to us. If you discover any issue regarding security, we'd appreciate a non-public disclosure of
+the information, so  please disclose the information responsibly by sending an email to Harald Hoyer harald@redhat.com and not by creating a GitHub issue. 
+We will respond swiftly to fix verifiable security issues with the disclosure being coordinated with distributions and relevant security teams.

.github/labeler.yml

@@ -0,0 +1,296 @@
+needs review:
+  - "*"
+
+repository:
+  - ./*
+
+github:
+  - .github/*
+  - .github/**/*
+
+dracut-install:
+  - install/*
+  - install/**/*
+
+example:
+  - examples/*
+  - examples/**/*
+  - examples/**/**/*
+
+modules:
+  - modules.d/*
+  - modules.d/**/*
+
+bash:
+  - modules.d/00bash/*
+
+bootchart:
+  - modules.d/00bootchart/*
+
+dash:
+  - modules.d/00dash/*
+
+mksh:
+  - modules.d/00mksh/*
+
+systemd:
+  - modules.d/00systemd/*
+
+warpclock:
+  - modules.d/00warpclock/*
+
+fips:
+  - modules.d/01fips/*
+
+systemd-initrd:
+  - modules.d/01systemd-initrd/*
+
+caps:
+  - modules.d/02caps/*
+
+systemd-networkd:
+  - modules.d/02systemd-networkd/*
+
+modsign:
+  - modules.d/03modsign/*
+
+rescue:
+  - modules.d/03rescue/*
+
+watchdog:
+  - modules.d/04watchdog/*
+
+busybox:
+  - modules.d/05busybox/*
+
+rngd:
+  - modules.d/06rngd/*
+
+i18n:
+  - modules.d/10i18n/*
+
+convertfs:
+  - modules.d/30convertfs/*
+
+network-legacy:
+  - modules.d/35network-legacy/*
+
+network-manager:
+ - modules.d/35network-manager/*
+
+network:
+  - modules.d/40network/*
+
+ifcfg:
+  - modules.d/45ifcfg/*
+
+url-lib:
+  - modules.d/45url-lib/*
+
+drm:
+  - modules.d/50drm/*
+
+gensplash:
+  - modules.d/50gensplash/*
+
+plymouth:
+  - modules.d/50plymouth/*
+
+cms:
+  - modules.d/80cms/*
+
+lvmmerge:
+  - modules.d/80lvmmerge/*
+
+cio_ignore:
+  - modules.d/81cio_ignore/*
+
+btrfs:
+  - modules.d/90btrfs/*
+
+crypt:
+  - modules.d/90crypt/*
+
+dm:
+  - modules.d/90dm/*
+
+dmraid:
+  - modules.d/90dmraid/*
+
+dmsquash-live:
+  - modules.d/90dmsquash-live/*
+
+dmsquash-live-ntfs:
+  - modules.d/90dmsquash-live-ntfs/*
+
+kernel-modules:
+  - modules.d/90kernel-modules/*
+
+kernel-modules-extra:
+  - modules.d/90kernel-modules-extra/*
+
+kernel-network-modules:
+  - modules.d/90kernel-network-modules/*
+
+livenet:
+  - modules.d/90livenet/*
+
+lvm:
+  - modules.d/90lvm/*
+
+mdraid:
+  - modules.d/90mdraid/*
+
+multipath:
+  - modules.d/90multipath/*
+
+nvdimm:
+  - modules.d/90nvdimm/*
+
+ppcmac:
+  - modules.d/90ppcmac/*
+
+qemu:
+  - modules.d/90qemu/*
+
+qemu-net:
+  - modules.d/90qemu-net/*
+
+stratis:
+  - modules.d/90stratis/*
+
+crypt-gpg:
+  - modules.d/91crypt-gpg/*
+
+crypt-loop:
+  - modules.d/91crypt-loop/*
+
+zipl:
+  - modules.d/91zipl/*
+
+cifs:
+  - modules.d/95cifs/*
+
+dasd:
+  - modules.d/95dasd/*
+
+dasd_mod:
+  - modules.d/95dasd_mod/*
+
+dasd_rules:
+  - modules.d/95dasd_rules/*
+
+dcssblk:
+  - modules.d/95dcssblk/*
+
+debug:
+  - modules.d/95debug/*
+
+fcoe:
+  - modules.d/95fcoe/*
+
+fcoe-uefi:
+  - modules.d/95fcoe-uefi/*
+
+fstab-sys:
+  - modules.d/95fstab-sys/*
+
+iscsi:
+  - modules.d/95iscsi/*
+
+lunmask:
+  - modules.d/95lunmask/*
+
+nbd:
+  - modules.d/95nbd/*
+
+nfs:
+  - modules.d/95nfs/*
+
+nvmf:
+  - modules.d/95nvmf/*
+
+qeth_rules:
+  - modules.d/95qeth_rules/*
+
+resume:
+  - modules.d/95resume/*
+
+rootfs-block:
+  - modules.d/95rootfs-block/*
+
+ssh-client:
+  - modules.d/95ssh-client/*
+
+terminfo:
+  - modules.d/95terminfo/*
+
+udev-rules:
+  - modules.d/95udev-rules/*
+
+virtfs:
+  - modules.d/95virtfs/*
+
+zfcp:
+  - modules.d/95zfcp/*
+
+zfcp_rules:
+  - modules.d/95zfcp_rules/*
+
+znet:
+  - modules.d/95znet/*
+
+securityfs:
+  - modules.d/96securityfs/*
+
+biosdevname:
+  - modules.d/97biosdevname/*
+
+masterkey:
+- modules.d/97masterkey/*
+
+dracut-systemd:
+  - modules.d/98dracut-systemd/*
+
+ecryptfs:
+  - modules.d/98ecryptfs/*
+
+integrity:
+  - modules.d/98integrity/*
+
+pollcdrom:
+  - modules.d/98pollcdrom/*
+
+selinux:
+  - modules.d/98selinux/*
+
+syslog:
+  - modules.d/98syslog/*
+
+usrmount:
+  - modules.d/98usrmount/*
+
+base:
+  - modules.d/99base/*
+
+fs-lib:
+  - modules.d/99fs-lib/*
+
+img-lib:
+  - modules.d/99img-lib/*
+
+memstrack:
+  - modules.d/99memstrack/*
+
+shutdown:
+  - modules.d/99shutdown/*
+
+squash:
+  - modules.d/99squash/*
+
+uefi-lib:
+  - modules.d/99uefi-lib/*
+
+test:
+  - test/*
+  - test/**/*

.github/pull_request_template.md

@@ -0,0 +1,10 @@
+This pull request changes...
+
+## Changes
+
+## Checklist
+- [ ] I have tested it locally
+- [ ] I have reviewed and updated any documentation if relevant
+- [ ] I am providing new code and test(s) for it
+
+Fixes #

.github/stale.yml

@@ -0,0 +1,20 @@
+# Number of days of inactivity before an issue becomes stale
+daysUntilStale: 30
+# Number of days of inactivity before a stale issue is closed
+daysUntilClose: 7
+# Issues with these labels will never be considered stale
+exemptLabels:
+  - documents
+  - enhancement
+  - regression
+  - wiki
+# Label to use when marking an issue as stale
+staleLabel: stale
+# Comment to post when marking an issue as stale. Set to `false` to disable
+markComment: >
+  This issue is being marked as stale because it has not had any recent activity. 
+  It will be closed if no further activity occurs. 
+  If this is still an issue in the latest release of Dracut and you would like to keep it open please comment on this issue within the next 7 days. 
+  Thank you for your contributions.
+# Comment to post when closing a stale issue. Set to `false` to disable
+closeComment: false

.github/workflows/fedora-31.yml

@@ -0,0 +1,56 @@
+## The test container is created with https://github.com/dracutdevs/fedora-container
+
+name: Fedora-31
+
+on:
+  push:
+    branches:
+      - 'master'
+    tags:
+      - '*'
+  pull_request:
+
+jobs:
+  test:
+    runs-on: ubuntu-latest
+    container:
+      image: quay.io/haraldh/dracut-fedora:31
+      options: "--privileged"
+    timeout-minutes: 45
+    strategy:
+      matrix:
+        test: [
+          "01",
+          "02",
+          "03",
+          "04",
+          "10",
+          "11",
+          "12",
+          "13",
+          "14",
+          "15",
+          "17",
+          "20",
+          "21",
+          "30",
+          "31",
+          "35",
+          "36",
+          "40",
+          "41",
+          "50",
+          "51",
+          "60",
+          "61",
+          "99",
+        ]
+      fail-fast: false
+    steps:
+      - name: "Checkout Repository"
+        uses: actions/checkout@v2
+        with:
+          fetch-depth: 0
+
+      - name: "TEST-${{ matrix.test }}"
+        run: ./fedora-test-github.sh "TEST-${{ matrix.test }}" ${{ matrix.test }}

.github/workflows/fedora-32.yml

@@ -0,0 +1,56 @@
+## The test container is created with https://github.com/dracutdevs/fedora-container
+
+name: Fedora-32
+
+on:
+  push:
+    branches:
+      - 'master'
+    tags:
+      - '*'
+  pull_request:
+
+jobs:
+  test:
+    runs-on: ubuntu-latest
+    container:
+      image: quay.io/haraldh/dracut-fedora:32
+      options: "--privileged"
+    timeout-minutes: 45
+    strategy:
+      matrix:
+        test: [
+          "01",
+          "02",
+          "03",
+          "04",
+          "10",
+          "11",
+          "12",
+          "13",
+          "14",
+          "15",
+          "17",
+          "20",
+          "21",
+          "30",
+          "31",
+          "35",
+          "36",
+          "40",
+          "41",
+          "50",
+          "51",
+          "60",
+          "61",
+          "99",
+        ]
+      fail-fast: false
+    steps:
+      - name: "Checkout Repository"
+        uses: actions/checkout@v2
+        with:
+          fetch-depth: 0
+
+      - name: "TEST-${{ matrix.test }}"
+        run: ./fedora-test-github.sh "TEST-${{ matrix.test }}" ${{ matrix.test }}

.github/workflows/labels.yml

@@ -0,0 +1,15 @@
+name: Label the Pull Requests automatically via Cron
+
+on:
+    schedule:
+        - cron: '*/15 * * * *'
+
+jobs:
+    label:
+        runs-on: ubuntu-18.04
+        steps:
+            - uses: paulfantom/periodic-labeler@master
+              env:
+                  GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+                  GITHUB_REPOSITORY: ${{ github.repository }}
+                  LABEL_MAPPINGS_FILE: .github/labeler.yml

.gitignore

@@ -6,8 +6,11 @@
 /dracut-gencmdline.8
 /dracut.html
 /dracut.kernel.7
+/dracut.pc
+/dracut-install
 /modules.d/99base/switch_root
 /test/*/test.log
+/test/*/.testdir
 test*.img
 /.buildpath
 /.project
@@ -15,5 +18,7 @@ test*.img
 /install/dracut-install
 /*.rpm
 /*.[0-9]
-/modules.d/98systemd/*.service.8
+/modules.d/98dracut-systemd/*.service.8
 /*.sign
+*.o
+skipcpio/skipcpio

.kateconfig

@@ -0,0 +1 @@
+kate: space-indent on; tab-width 4; indent-width 4; replace-tabs on; eol unix;

.kateproject

@@ -0,0 +1,9 @@
+{
+  "name": "Dracut"
+  , "files": [ { "git": 1 } ]
+  , "build": {
+    "directory": "./"
+  , "build": "make -j $(getconf _NPROCESSORS_ONLN) all"
+  , "clean": "make clean"
+  }
+}

.mailmap

@@ -4,12 +4,33 @@ Philippe Seewer <philippe.seewer@bfh.ch> 	<philippe.seewer@bfh.ch>
 Victor Lowther <victor.lowther@gmail.com> 	<victor.lowther-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
 Harald Hoyer <harald@redhat.com> 		<harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
 Harald Hoyer <harald@redhat.com> 		<harald@eeepc.(none)>
+Harald Hoyer <harald@redhat.com> 		<harald@hoyer.xyz>
 Mike Snitzer <snitzer@redhat.com> 		<msnitzer@redhat.com>
 Amerigo Wang <amwang@redhat.com> 		<xiyou.wangcong@gmail.com>
 Andrey Borzenkov <arvidjaar@gmail.com> 		<arvidjaar@mail.ru>
 Dan Horák <dhorak@redhat.com> 			<dan@danny.cz>
 John Reiser <jreiser@bitwagon.com> 		<jreiser@BitWagon.com>
 Luca Berra <bluca@vodka.it> 			<bluca@comedia.it>
-Dave Young <dyoung@redhat.com>	 		dyoung@redhat.com
+Dave Young <dyoung@redhat.com>	 		<dyoung@redhat.com>
+Dave Young <dyoung@redhat.com>	 		<dave@redhat.com>
 Frederick Grose <fgrose@sugarlabs.org> 		<fgrose@gmail.com>
 Frederic Crozat <fcrozat@suse.com> 		<fcrozat@mandriva.com>
+Shawn W Dunn <sfalken@opensuse.org> 		<sfalken@opensuse.org>
+Kyle McMartin <kmcmarti@redhat.com>             <kyle@redhat.com>
+Angelo "pallotron" Failla <pallotron@fb.com>     <pallotron@fb.com>
+Yu Watanabe <watanabe.yu+github@gmail.com>
+Martin Wilck <mwilck@suse.de>   <mwilck@suse.com>
+Thomas Renninger <trenn@suse.com>   <trenn@suse.de>
+Andrey Borzenkov <arvidjaar@gmail.com>
+Cristian Rodríguez <crrodriguez@opensuse.org>
+Daniel Drake <drake@endlessm.com> <dsd@laptop.org>
+Fabian Vogt <fvogt@suse.com>
+Hannes Reinecke <hare@suse.com>  <hare@suse.de>
+Julian Wolf <juwolf@suse.com>  <juwolf@suse.de>
+Lidong Zhong <lidong.zhong@suse.com> <lzhong@suse.com>
+Nikoli <nikoli@gmx.us> <nikoli@lavabit.com>
+Peter Robinson <pbrobinson@fedoraproject.org> <pbrobinson@gmail.com>
+Xunlei Pang <xlpang@redhat.com> <xpang@redhat.com>
+Daniel Molkentin <daniel.molkentin@suse.com> <dmolkentin@suse.com>
+Thomas Blume <thomas.blume@suse.com> <Thomas.Blume@suse.com>
+Brian C. Lane <bcl@redhat.com> <bcl@brianlane.com>

.travis.yml

@@ -0,0 +1,56 @@
+language: generic
+dist: bionic
+sudo: required
+services:
+  - docker
+env:
+  matrix:
+    - IMAGE=latest
+    - IMAGE=latest TESTS=01
+    - IMAGE=latest TESTS=12
+    - IMAGE=latest TESTS=20
+    - IMAGE=latest TESTS=21
+    - IMAGE=latest TESTS=50
+    - IMAGE=latest TESTS=51
+    - IMAGE=latest TESTS=30
+    - IMAGE=latest TESTS=31
+    - IMAGE=latest TESTS=35
+    - IMAGE=latest TESTS=36
+    - IMAGE=latest TESTS=40
+    - IMAGE=latest TESTS=41
+    - IMAGE=latest TESTS=60
+    - IMAGE=latest TESTS=61
+    - IMAGE=latest TESTS=99
+    - IMAGE=latest TESTS=02
+    - IMAGE=latest TESTS=03
+    - IMAGE=latest TESTS=04
+    - IMAGE=latest TESTS=10
+    - IMAGE=latest TESTS=11
+    - IMAGE=latest TESTS=13
+    - IMAGE=latest TESTS=14
+    - IMAGE=latest TESTS=15
+    - IMAGE=latest TESTS=17
+
+before_script:
+  - docker pull quay.io/haraldh/dracut-fedora:$IMAGE
+  - |
+    sudo modprobe kvm-intel nested=1 || :
+    sudo modprobe kvm-amd nested=1 || :
+    dmesg | tail || :
+  - git fetch --tags --unshallow
+  - |
+    git describe --abbrev=0 --tags || :
+    git describe --tags || :
+
+script:
+  ## The test container is created with https://github.com/dracutdevs/fedora-container
+  - docker run --privileged -it -v $(pwd)/:/dracut quay.io/haraldh/dracut-fedora:$IMAGE /dracut/fedora-test.sh $IMAGE-$$ "$TESTS"
+
+notifications:
+  webhooks:
+    urls:
+      - https://webhooks.gitter.im/e/effa917ca3e0ed5fd00e
+    on_success: change  # options: [always|never|change] default: always
+    on_failure: always  # options: [always|never|change] default: always
+    on_start: never     # options: [always|never|change] default: always
+

50-dracut.install

@@ -1,32 +1,63 @@
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+#!/bin/bash
 
-if [[ -f /etc/kernel/cmdline ]]; then
-    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+COMMAND="$1"
+KERNEL_VERSION="$2"
+BOOT_DIR_ABS="$3"
+KERNEL_IMAGE="$4"
+
+# If KERNEL_INSTALL_MACHINE_ID is defined but empty, BOOT_DIR_ABS is a fake directory.
+# So, let's skip to create initrd.
+if ! [[ ${KERNEL_INSTALL_MACHINE_ID-x} ]]; then
+    exit 0
 fi
 
-if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-    readarray -t BOOT_OPTIONS < /proc/cmdline
+if [[ -d "$BOOT_DIR_ABS" ]]; then
+    INITRD="initrd"
+else
+    BOOT_DIR_ABS="/boot"
+    INITRD="initramfs-${KERNEL_VERSION}.img"
 fi
 
-unset noimageifnotneeded
-
-for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
-    if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
-        noimageifnotneeded="yes"
-        break
-    fi
-done
-
 ret=0
-case "$1" in
+case "$COMMAND" in
     add)
-	dracut ${noimageifnotneeded:+--noimageifnotneeded} "$3"/initrd "$2"
+        INITRD_IMAGE_PREGENERATED=${KERNEL_IMAGE%/*}/initrd
+        if [[ -f ${INITRD_IMAGE_PREGENERATED} ]]; then
+            # we found an initrd at the same place as the kernel
+            # use this and don't generate a new one
+            cp --reflink=auto "$INITRD_IMAGE_PREGENERATED" "$BOOT_DIR_ABS/$INITRD" \
+                && chown root:root "$BOOT_DIR_ABS/$INITRD" \
+                && chmod 0600 "$BOOT_DIR_ABS/$INITRD" \
+                && exit 0
+        fi
+
+        if [[ -f /etc/kernel/cmdline ]]; then
+            read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
+        elif [[ -f /usr/lib/kernel/cmdline ]]; then
+            read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
+        else
+            declare -a BOOT_OPTIONS
+
+            read -r -d '' -a line < /proc/cmdline
+            for i in "${line[@]}"; do
+                [[ "${i#initrd=*}" != "$i" ]] && continue
+                BOOT_OPTIONS+=("$i")
+            done
+        fi
+
+        unset noimageifnotneeded
+
+        for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
+            if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
+                noimageifnotneeded="yes"
+                break
+            fi
+        done
+	dracut -f ${noimageifnotneeded:+--noimageifnotneeded} "$BOOT_DIR_ABS/$INITRD" "$KERNEL_VERSION"
         ret=$?
 	;;
     remove)
-        rm -f -- "$3"/initrd
+        rm -f -- "$BOOT_DIR_ABS/$INITRD"
         ret=$?
 	;;
 esac

51-dracut-rescue-postinst.sh

@@ -1,70 +0,0 @@
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-export LANG=C
-
-KERNEL_VERSION="$1"
-KERNEL_IMAGE="$2"
-
-[[ -f /etc/os-release ]] && . /etc/os-release
-
-if [[ ! -f /etc/machine-id ]] || [[ ! -s /etc/machine-id ]]; then
-    systemd-machine-id-setup
-fi
-
-[[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
-
-[[ $MACHINE_ID ]] || exit 1
-[[ -f $KERNEL_IMAGE ]] || exit 1
-
-INITRDFILE="/boot/initramfs-0-rescue-${MACHINE_ID}.img"
-NEW_KERNEL_IMAGE="${KERNEL_IMAGE%/*}/vmlinuz-0-rescue-${MACHINE_ID}"
-
-[[ -f $INITRDFILE ]] && [[ -f $NEW_KERNEL_IMAGE ]] && exit 0
-
-dropindirs_sort()
-{
-    suffix=$1; shift
-    args=("$@")
-    files=$(
-        while (( $# > 0 )); do
-            for i in ${1}/*${suffix}; do
-                [[ -f $i ]] && echo ${i##*/}
-            done
-            shift
-        done | sort -Vu
-    )
-
-    for f in $files; do
-        for d in "${args[@]}"; do
-            if [[ -f "$d/$f" ]]; then
-                echo "$d/$f"
-                continue 2
-            fi
-        done
-    done
-}
-
-# source our config dir
-for f in $(dropindirs_sort ".conf" "/etc/dracut.conf.d" "/usr/lib/dracut/dracut.conf.d"); do
-    [[ -e $f ]] && . "$f"
-done
-
-[[ $dracut_rescue_image != "yes" ]] && exit 0
-
-if [[ ! -f $INITRDFILE ]]; then
-    dracut --no-hostonly -a "rescue" "$INITRDFILE" "$KERNEL_VERSION"
-    ((ret+=$?))
-fi
-
-if [[ ! -f $NEW_KERNEL_IMAGE ]]; then
-    cp "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
-    ((ret+=$?))
-fi
-
-new-kernel-pkg --install "$KERNEL_VERSION" --kernel-image "$NEW_KERNEL_IMAGE" --initrdfile "$INITRDFILE" --banner "$NAME $VERSION_ID Rescue $MACHINE_ID"
-
-((ret+=$?))
-
-exit $ret

51-dracut-rescue.install

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 export LANG=C
 
@@ -35,32 +33,50 @@ dropindirs_sort()
 
 [[ -f /etc/os-release ]] && . /etc/os-release
 
-if [[ ! -f /etc/machine-id ]] || [[ ! -s /etc/machine-id ]]; then
-    systemd-machine-id-setup
+if [[ ${KERNEL_INSTALL_MACHINE_ID+x} ]]; then
+    MACHINE_ID=$KERNEL_INSTALL_MACHINE_ID
+elif [[ -f /etc/machine-id ]] ; then
+    read MACHINE_ID < /etc/machine-id
 fi
 
-[[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
+if ! [[ $MACHINE_ID ]]; then
+    exit 0
+fi
 
 if [[ -f /etc/kernel/cmdline ]]; then
-    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
-fi
-if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-    readarray -t BOOT_OPTIONS < /proc/cmdline
-fi
-if ! [[ $BOOT_OPTIONS ]]; then
-    exit 1
+    read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
+elif [[ -f /usr/lib/kernel/cmdline ]]; then
+    read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
+else
+    declare -a BOOT_OPTIONS
+
+    read -r -d '' -a line < /proc/cmdline
+    for i in "${line[@]}"; do
+        [[ "${i#initrd=*}" != "$i" ]] && continue
+        BOOT_OPTIONS+=("$i")
+    done
 fi
 
-LOADER_ENTRY="/boot/loader/entries/${MACHINE_ID}-0-rescue.conf"
-BOOT_DIR="/${MACHINE_ID}/0-rescue"
+if [[ -d "${BOOT_DIR_ABS%/*}" ]]; then
+    BOOT_DIR="/${MACHINE_ID}/0-rescue"
+    BOOT_ROOT=${BOOT_DIR_ABS%$BOOT_DIR}
+    LOADER_ENTRY="$BOOT_ROOT/loader/entries/${MACHINE_ID}-0-rescue.conf"
+    KERNEL="linux"
+    INITRD="initrd"
+else
+    BLS_DIR="/boot/loader/entries"
+    BOOT_DIR_ABS="/boot"
+    LOADER_ENTRY="$BLS_DIR/${MACHINE_ID}-0-rescue.conf"
+    KERNEL="vmlinuz-0-rescue-${MACHINE_ID}"
+    INITRD="initramfs-0-rescue-${MACHINE_ID}.img"
+fi
 
 ret=0
 
 case "$COMMAND" in
     add)
-        for i in "/boot/loader/entries/${MACHINE_ID}-0-rescue.conf"; do
-            [[ -f $i ]] && exit 0
-        done
+        [[ -f "$LOADER_ENTRY" ]] && [[ -f "$BOOT_DIR_ABS/$KERNEL" ]] \
+            && [[ -f "$BOOT_DIR_ABS/$INITRD" ]] && exit 0
 
         # source our config dir
         for f in $(dropindirs_sort ".conf" "/etc/dracut.conf.d" "/usr/lib/dracut/dracut.conf.d"); do
@@ -71,21 +87,33 @@ case "$COMMAND" in
 
         [[ -d "$BOOT_DIR_ABS" ]] || mkdir -p "$BOOT_DIR_ABS"
 
-        if ! cp "$KERNEL_IMAGE" "$BOOT_DIR_ABS"/linux; then
-            echo "Can't copy '$KERNEL_IMAGE to '$BOOT_DIR_ABS/linux'!" >&2
+        if ! cp --reflink=auto "$KERNEL_IMAGE" "$BOOT_DIR_ABS/$KERNEL"; then
+            echo "Can't copy '$KERNEL_IMAGE to '$BOOT_DIR_ABS/$KERNEL'!" >&2
         fi
 
-        dracut --no-hostonly  -a "rescue" "$BOOT_DIR_ABS"/initrd "$2"
-        ((ret+=$?))
+        if [[ ! -f "$BOOT_DIR_ABS/$INITRD" ]]; then
+            dracut -f --no-hostonly -a "rescue" "$BOOT_DIR_ABS/$INITRD" "$KERNEL_VERSION"
+            ((ret+=$?))
+        fi
+
+        if [[ "${BOOT_DIR_ABS}" != "/boot" ]]; then
+            {
+                echo "title      $PRETTY_NAME - Rescue Image"
+                echo "version    $KERNEL_VERSION"
+                echo "machine-id $MACHINE_ID"
+                echo "options    ${BOOT_OPTIONS[@]} rd.auto=1"
+                echo "linux      $BOOT_DIR/linux"
+                echo "initrd     $BOOT_DIR/initrd"
+            } > $LOADER_ENTRY
+        else
+            if [[ -e "${BLS_DIR}/${MACHINE_ID}-${KERNEL_VERSION}.conf" ]]; then
+                cp -aT "${BLS_DIR}/${MACHINE_ID}-${KERNEL_VERSION}.conf" $LOADER_ENTRY
+            else
+                cp -aT "${KERNEL_IMAGE%/*}/bls.conf" $LOADER_ENTRY
+            fi
+            sed -i 's/'$KERNEL_VERSION'/0-rescue-'${MACHINE_ID}'/' $LOADER_ENTRY
+        fi
 
-        {
-            echo "title      $PRETTY_NAME - Rescue Image"
-            echo "version    $KERNEL_VERSION"
-            echo "machine-id $MACHINE_ID"
-            echo "options    ${BOOT_OPTIONS[@]} rd.auto=1"
-            echo "linux      $BOOT_DIR/linux"
-            echo "initrd     $BOOT_DIR/initrd"
-        } > $LOADER_ENTRY
         ((ret+=$?))
         ;;
 
@@ -98,6 +126,4 @@ case "$COMMAND" in
         ret=1;;
 esac
 
-((ret+=$?))
-
 exit $ret

AUTHORS

@@ -1,107 +1,300 @@
 Harald Hoyer <harald@redhat.com>
 Victor Lowther <victor.lowther@gmail.com>
 Amadeusz Żołnowski <aidecoe@aidecoe.name>
+Hannes Reinecke <hare@suse.com>
+Daniel Molkentin <dmolkentin@suse.com>
 Will Woods <wwoods@redhat.com>
 Philippe Seewer <philippe.seewer@bfh.ch>
 Warren Togami <wtogami@redhat.com>
-Jeremy Katz <katzj@redhat.com>
+Kairui Song <kasong@redhat.com>
 Dave Young <dyoung@redhat.com>
+Jeremy Katz <katzj@redhat.com>
 David Dillow <dave@thedillows.org>
+Lukas Nykryn <lnykryn@redhat.com>
+Lubomir Rintel <lkundrak@v3.sk>
 Michal Soltys <soltys@ziu.info>
-Amerigo Wang <amwang@redhat.com>
 Colin Guthrie <colin@mageia.org>
+Jóhann B. Guðmundsson <johannbg@gmail.com>
+Amerigo Wang <amwang@redhat.com>
+Thomas Renninger <trenn@suse.com>
+Alexander Tsoy <alexander@tsoy.me>
+Martin Wilck <mwilck@suse.de>
+Frederick Grose <fgrose@sugarlabs.org>
+WANG Chao <chaowang@redhat.com>
+Yu Watanabe <watanabe.yu+github@gmail.com>
 Andrey Borzenkov <arvidjaar@gmail.com>
+Hans de Goede <hdegoede@redhat.com>
+Jonathan Lebon <jonathan@jlebon.com>
 Peter Jones <pjones@redhat.com>
 Andreas Thienemann <andreas@bawue.net>
-Hans de Goede <hdegoede@redhat.com>
-WANG Chao <chaowang@redhat.com>
+Peter Robinson <pbrobinson@fedoraproject.org>
+Frantisek Sumsal <frantisek@sumsal.cz>
+Fabian Vogt <fvogt@suse.com>
+Colin Walters <walters@verbum.org>
 John Reiser <jreiser@bitwagon.com>
 Luca Berra <bluca@vodka.it>
-Thomas Renninger <trenn@suse.de>
-Daniel Drake <dsd@laptop.org>
-Dan Horák <dhorak@redhat.com>
-Baoquan He <bhe@redhat.com>
-Leho Kraav <leho@kraav.com>
+Nicolas Chauvet <kwizart@gmail.com>
+Xunlei Pang <xlpang@redhat.com>
 Brian C. Lane <bcl@redhat.com>
-Kamil Rytarowski <n54@gmx.com>
-Marc Grimme <grimme@atix.de>
-Chao Wang <chaowang@redhat.com>
-Colin Walters <walters@verbum.org>
-Frederic Crozat <fcrozat@suse.com>
-Jesse Keating <jkeating@redhat.com>
-Milan Broz <mbroz@redhat.com>
-Peter Rajnoha <prajnoha@redhat.com>
+Daniel Drake <drake@endlessm.com>
+Angelo "pallotron" Failla <pallotron@fb.com>
+Thomas Blume <thomas.blume@suse.com>
+Ville Skyttä <ville.skytta@iki.fi>
+Beniamino Galvani <bgalvani@redhat.com>
+Böszörményi Zoltán <zboszor@pr.hu>
+Cristian Rodríguez <crrodriguez@opensuse.org>
+Dan Horák <dhorak@redhat.com>
+Renaud Métrich <rmetrich@redhat.com>
+Baoquan He <bhe@redhat.com>
+Brendan Germain <brendan.germain@nasdaqomx.com>
+Javier Martinez Canillas <javierm@redhat.com>
+Jonas Witschel <diabonas@gmx.de>
+Leho Kraav <leho@kraav.com>
+Moritz Maxeiner <moritz@ucworks.org>
+Nathan Rini <nate@ucar.edu>
+Ondrej Mosnacek <omosnace@redhat.com>
 Radek Vykydal <rvykydal@redhat.com>
+Fabian Deutsch <fabiand@fedoraproject.org>
+Kamil Rytarowski <n54@gmx.com>
+Lidong Zhong <lidong.zhong@suse.com>
+Marc Grimme <grimme@atix.de>
+Mike Gilbert <floppym@gentoo.org>
+NeilBrown <neilb@suse.de>
+Peter Rajnoha <prajnoha@redhat.com>
+Thorsten Behrens <tbehrens@suse.com>
+Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
+q66 <daniel@octaforge.org>
+Đoàn Trần Công Danh <congdanhqx@gmail.com>
+Chao Wang <chaowang@redhat.com>
+David Tardon <dtardon@redhat.com>
+Frederic Crozat <fcrozat@suse.com>
+James Lee <jlee@thestaticvoid.com>
+Jesse Keating <jkeating@redhat.com>
+Mikhail Novosyolov <m.novosyolov@rosalinux.ru>
+Milan Broz <mbroz@redhat.com>
+Mimi Zohar <zohar@linux.vnet.ibm.com>
+Norbert Lange <norbert.lange@andritz.com>
 Roberto Sassu <roberto.sassu@polito.it>
+Stefan Reimer <it@startux.de>
+Takashi Iwai <tiwai@suse.de>
+Tomasz Paweł Gajc <tpgxyz@gmail.com>
+tpgxyz <tpgxyz@gmail.com>
+Adam Williamson <awilliam@redhat.com>
 Anton Blanchard <anton@samba.org>
 Bill Nottingham <notting@redhat.com>
+Chapman Flack <g2@anastigmatix.net>
+Chris Leech <cleech@redhat.com>
 David Cantrell <dcantrell@redhat.com>
 Dennis Gilmore <dennis@ausil.us>
+Doan Tran Cong Danh <congdanhqx@gmail.com>
+Gaël PORTAY <gael.portay@collabora.com>
+Jan Synacek <jsynacek@redhat.com>
+Jiri Konecny <jkonecny@redhat.com>
 Jon Ander Hernandez <jonan.h@gmail.com>
 Juan RP <xtraeme@gmail.com>
 Lance Albertson <lance@osuosl.org>
+Marcos Mello <marcosfrm@gmail.com>
 Marian Ganisin <mganisin@redhat.com>
+Matthias Gerstner <matthias.gerstner@suse.de>
+Max Resch <resch.max@gmail.com>
 Michael Ploujnikov <plouj@somanetworks.com>
+Pratyush Anand <panand@redhat.com>
+Silvio Fricke <silvio.fricke@gmail.com>
+Steven Brudenell <steven.brudenell@gmail.com>
+Stig Telfer <stelfer@cray.com>
+Thomas Backlund <tmb@mageia.org>
+Topi Miettinen <toiwoton@gmail.com>
+Vasiliy Tolstov <v.tolstov@selfip.ru>
 Wim Muskee <wimmuskee@gmail.com>
 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
 Alan Pevec <apevec@redhat.com>
-Alexander Tsoy <alexander@tsoy.me>
-Frederick Grose <fgrose@sugarlabs.org>
+Alex Harpin <development@landsofshadow.co.uk>
+Ankit Kumar <ankit@linux.vnet.ibm.com>
+Antony Messerli <amesserl@rackspace.com>
+Chao Fan <cfan@redhat.com>
+Daniel Cordero <dracut@0xdc.io>
+Daniel Kahn Gillmor <dkg@fifthhorseman.net>
+Daniel Schaal <farbing@web.de>
+Denis Silakov <dsilakov@virtuozzo.com>
+Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
+Dusty Mabe <dusty@dustymabe.com>
+Erwan Velu <erwan.velu@enovance.com>
+Evgeny Vereshchagin <evvers@ya.ru>
+Guido Trentalancia <guido@trentalancia.net>
+Hari Bathini <hbathini@linux.vnet.ibm.com>
 Ian Dall <ian@beware.dropbear.id.au>
+Imran Haider <imran1008@gmail.com>
 James Buren <ryuo@frugalware.org>
-James Lee <jlee@thestaticvoid.com>
+Jan Macku <jamacku@redhat.com>
 Joey Boggs <jboggs@redhat.com>
+Julian Wolf <juwolf@suse.com>
+Koen Kooi <koen@dominion.thruhere.net>
 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Kyle McMartin <kmcmarti@redhat.com>
+Lukas Wunner <lukas@wunner.de>
+Marko Myllynen <myllynen@redhat.com>
+Michal Koutný <mkoutny@suse.com>
 Mike Snitzer <snitzer@redhat.com>
+Minfei Huang <mhuang@redhat.com>
+Nikoli <nikoli@gmx.us>
+Patrick Talbert <ptalbert@redhat.com>
+Pedro Monreal <pmgdeb@gmail.com>
+Pingfan Liu <piliu@redhat.com>
 Przemysław Rudy <prudy1@o2.pl>
-Stefan Reimer <it@startux.de>
+Robert LeBlanc <robert@leblancnet.us>
+Robert Scheck <robert@fedoraproject.org>
+Stefan Berger <stefanb@us.ibm.com>
 Thomas Lange <lange@informatik.uni-koeln.de>
+Till Maas <opensource@till.name>
+Tony Asleson <tasleson@redhat.com>
 Vivek Goyal <vgoyal@redhat.com>
 Vladislav Bogdanov <bubble@hoster-ok.com>
-Adam Williamson <awilliam@redhat.com>
+Érico Rolim <erico.erc@gmail.com>
+наб <nabijaczleweli@nabijaczleweli.xyz>
+A. Wilcox <AWilcox@Wilcox-Tech.com>
+Alexander Kurtz <alexander@kurtz.be>
+Alexander Miroshnichenko <alex@millerson.name>
+Alexander Sosedkin <asosedkin@redhat.com>
 Alexander Todorov <atodorov@redhat.com>
+Alexey Kodanev <alexey.kodanev@oracle.com>
+Andreas Schwab <schwab@suse.de>
+Andreas Stieger <astieger@suse.com>
 Andy Lutomirski <luto@mit.edu>
 Anssi Hannula <anssi@mageia.org>
+Antz <antzz@protonmail.ch>
+Arnaud Rebillout <arnaud.rebillout@collabora.com>
+Artem Savkov <asavkov@redhat.com>
+Attila Bruncsak <bruncsak@users.noreply.github.com>
+B. Wilson <x@wilsonb.com>
+Ben Howard <ben.howard@redhat.com>
+Benjamin Marzinski <bmarzins@redhat.com>
 Brandon Philips <brandon@ifup.co>
+Bruno E. O. Meneguele <bmeneg@redhat.com>
+Bryn M. Reeves <bmr@redhat.com>
 Canek Peláez Valdés <caneko@gmail.com>
-Chris Leech <cleech@redhat.com>
+Carlo Caione <carlo@endlessm.com>
+Chad Dupuis <chad.dupuis@cavium.com>
 Christian Heinz <christian.ch.heinz@gmail.com>
 Cong Wang <amwang@redhat.com>
-Daniel Schaal <farbing@web.de>
+Dan Fuhry <dfuhry@datto.com>
+Daniel Molkentin <daniel.molkentin@suse.com>
 Dave Jones <davej@redhat.com>
-Dave Young <dave@redhat.com>
+David Disseldorp <ddiss@suse.de>
+David Michael <david.michael@coreos.com>
+Denis Volkov <denis@simpletexting.net>
 Dennis Schridde <devurandom@gmx.net>
+Derek Hageman <hageman@inthat.cloud>
+Derek Higgins <derekh@redhat.com>
+Donovan Tremura <neurognostic@protonmail.ch>
 Duane Griffin <duaneg@dghda.com>
+Elan Ruusamäe <glen@delfi.ee>
+Enno Boland <g@s01.de>
+Enzo Matsumiya <ematsumiya@suse.de>
+Eugene S. Sobolev <sobolev@protei.ru>
+Eugene Syromiatnikov <esyr@redhat.com>
+Fabian Vogt <fvogt@suse.de>
+Florian Albrechtskirchinger <falbrechtskirchinger@gmail.com>
+Florian Gamböck <mail@floga.de>
+Frank Deng <frank.deng@oracle.com>
+François Cami <fcami@fedoraproject.org>
+Gerd von Egidy <gerd.von.egidy@intra2net.com>
 Glen Gray <slaine@slaine.org>
+GuoChuang <guo.chuang@zte.com.cn>
+HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
+Hendrik Brueckner <brueckner@linux.ibm.com>
 Hermann Gausterer <git-dracut-2012@mrq1.org>
+Hiroaki Mizuguchi <hiroaki-m@iij.ad.jp>
+Hongxu Jia <hongxu.jia@windriver.com>
+Hui Wang <john.wanghui@huawei.com>
+Ignaz Forster <iforster@suse.com>
+Jacob Wen <jian.w.wen@oracle.com>
 James Laska <jlaska@redhat.com>
 Jan Stodola <jstodola@redhat.com>
+Jason Dana <jasondana@quarksecurity.com>
+Jens Heise <46450477+heisej@users.noreply.github.com>
+Jeremy Linton <lintonrjeremy@gmail.com>
 Jiri Pirko <jiri@resnulli.us>
 Joe Lawrence <Joe.Lawrence@stratus.com>
+Johannes Thumshirn <jthumshirn@suse.com>
+Jonas Jonsson <jonas@websystem.se>
+Jonas Witschel <diabonas@archlinux.org>
 Kevin Yung <Kevin.Yung@myob.com>
-Kyle McMartin <kyle@redhat.com>
 Lars R. Damerow <lars@pixar.com>
+Lee Duncan <lduncan@suse.com>
 Lennert Buytenhek <buytenh@wantstofly.org>
-Lubomir Rintel <lkundrak@v3.sk>
+Lianbo Jiang <lijiang@redhat.com>
+Lucas C. Villa Real <lucasvr@gmail.com>
+Major Hayden <major@mhtx.net>
+Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
+Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
+Marian Csontos <mcsontos@redhat.com>
+Mark Fasheh <mfasheh@suse.de>
 Matt <smoothsailing72@hotmail.com>
 Matt Smith <shadowfax@gmx.com>
+Matthew Thode <mthode@mthode.org>
+Mei Liu <liumbj@linux.vnet.ibm.com>
+Michael Chapman <mike@very.puzzling.org>
+Michael McCracken <michael.mccracken@gmail.com>
 Michal Schmidt <mschmidt@redhat.com>
+Michal Sekletar <msekleta@redhat.com>
 Mike Gorse <mgorse@suse.com>
+Moritz 'Morty' Strübe <morty@gmx.net>
 Munehiro Matsuda <haro@kgt.co.jp>
-Nicolas Chauvet <kwizart@gmail.com>
-Nikoli <nikoli@lavabit.com>
+Nicolas Porcel <nicolasporcel06@gmail.com>
 Olivier Blin <dev@blino.org>
+Ondrej Dubaj <odubaj@redhat.com>
+P J P <ppandit@redhat.com>
 Paolo Bonzini <pbonzini@redhat.com>
-Peter Robinson <pbrobinson@fedoraproject.org>
+Paul Robins <exp@users.noreply.github.com>
+Pavel Zhukov <pzhukov@redhat.com>
+Pawel Wieczorkiewicz <pwieczorkiewicz@suse.de>
+Pekka Wallendahl <wyrmiyu@gmail.com>
+Peter Georg <peter.georg@physik.uni-regensburg.de>
+Petr Pavlu <petr.pavlu@suse.com>
+Petr Tesarik <ptesarik@suse.com>
+Petr Vorel <pvorel@suse.cz>
+Prarit Bhargava <prarit@redhat.com>
+Praveen_Paladugu@Dell.com <Praveen_Paladugu@Dell.com>
 Pádraig Brady <P@draigBrady.com>
 Quentin Armitage <quentin@armitage.org.uk>
 Robert Buchholz <rbu@goodpoint.de>
+Ruben Kerkhof <ruben@rubenkerkhof.com>
+Rumbaut Thomas <Thomas.Rumbaut@digipolis.gent>
+Rusty Bird <rustybird@openmailbox.org>
+Sebastian Mitterle <smitterl@redhat.com>
 Sergey Fionov <fionov@gmail.com>
+Shawn W Dunn <sfalken@opensuse.org>
 Srinivasa T N <seenutn@linux.vnet.ibm.com>
+Stijn Hoop <stijn@sandcat.nl>
+Sullivan (CTR), Austin <austin.sullivan.ctr@progeny.net>
+Thierry Vignaud <thierry.vignaud@gmail.com>
 Thilo Bangert <thilo.bangert@gmx.net>
-Thomas Backlund <tmb@mageia.org>
+Thomas Abraham <tabraham@suse.com>
+Tobias Geerinckx <tobias.geerinckx@gmail.com>
+Tobias Klauser <tklauser@distanz.ch>
+Tom Gundersen <teg@jklm.no>
 Tomasz Torcz <tomek@pipebreaker.pl>
+Tong Li <tonli@redhat.com>
 Vadim Kuznetsov <vadimk@gentoo.org>
-Ville Skyttä <ville.skytta@iki.fi>
+Vaughan Cao <vaughan.cao@oracle.com>
+Vratislav Podzimek <vpodzime@redhat.com>
 Yanko Kaneti <yaneti@declera.com>
+Zhiguo Deng <bjzgdeng@linux.vnet.ibm.com>
+Ziyue Yang <ziyang@redhat.com>
+gaoyi <ymuemc@163.com>
+honza801 <honza801@gmail.com>
+jbash aka John Bashinski <jbash@velvet.com>
+jloeser <jloeser@suse.de>
+johannes <johannes.brechtmann@gmail.com>
+jonathan-teh <30538043+jonathan-teh@users.noreply.github.com>
+leo-lb <lle-bout@zaclys.net>
+logan <logancaldwell23@gmail.com>
+masem <matej.semian@gmail.com>
 maximilian attems <max@stro.at>
+mulhern <amulhern@redhat.com>
+mwberry <mwberry@users.noreply.github.com>
+nabijaczleweli <nabijaczleweli@gmail.com>
+privb0x23 <privb0x23@users.noreply.github.com>
+tpg <tpgxyz@gmail.com>
+xtraeme <xtraeme@voidlinux.eu>
+Дамјан Георгиевски <gdamjan@gmail.com>

Makefile

@@ -1,7 +1,13 @@
 -include dracut-version.sh
 
-VERSION = $(shell [ -d .git ] && git describe --abbrev=0 --tags 2>/dev/null || echo $(DRACUT_VERSION))
-GITVERSION = $(shell [ -d .git ] && { v=$$(git describe --tags 2>/dev/null); [ $${v\#*-} != $$v ] && echo -$${v\#*-}; } )
+DRACUT_MAIN_VERSION ?= $(shell env GIT_CEILING_DIRECTORIES=$(CWD)/.. git describe --abbrev=0 --tags --always 2>/dev/null || :)
+ifeq ($(DRACUT_MAIN_VERSION),)
+DRACUT_MAIN_VERSION = $(DRACUT_VERSION)
+endif
+DRACUT_FULL_VERSION ?= $(shell env GIT_CEILING_DIRECTORIES=$(CWD)/.. git describe --tags --always 2>/dev/null || :)
+ifeq ($(DRACUT_FULL_VERSION),)
+DRACUT_FULL_VERSION = $(DRACUT_VERSION)
+endif
 
 -include Makefile.inc
 
@@ -12,9 +18,9 @@ pkglibdir ?= ${libdir}/dracut
 sysconfdir ?= ${prefix}/etc
 bindir ?= ${prefix}/bin
 mandir ?= ${prefix}/share/man
-CFLAGS ?= -O2 -g -Wall
-CFLAGS += -std=gnu99  -D_FILE_OFFSET_BITS=64
+CFLAGS ?= -O2 -g -Wall -std=gnu99 -D_FILE_OFFSET_BITS=64 -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
 bashcompletiondir ?= ${datadir}/bash-completion/completions
+pkgconfigdatadir ?= $(datadir)/pkgconfig
 
 man1pages = lsinitrd.1
 
@@ -28,20 +34,23 @@ man8pages = dracut.8 \
             dracut-catimages.8 \
             mkinitrd.8 \
             mkinitrd-suse.8 \
-            modules.d/98systemd/dracut-cmdline.service.8 \
-            modules.d/98systemd/dracut-initqueue.service.8 \
-            modules.d/98systemd/dracut-mount.service.8 \
-            modules.d/98systemd/dracut-shutdown.service.8 \
-            modules.d/98systemd/dracut-pre-mount.service.8 \
-            modules.d/98systemd/dracut-pre-pivot.service.8 \
-            modules.d/98systemd/dracut-pre-trigger.service.8 \
-            modules.d/98systemd/dracut-pre-udev.service.8
+            modules.d/98dracut-systemd/dracut-cmdline.service.8 \
+            modules.d/98dracut-systemd/dracut-initqueue.service.8 \
+            modules.d/98dracut-systemd/dracut-mount.service.8 \
+            modules.d/98dracut-systemd/dracut-shutdown.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-mount.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-pivot.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-trigger.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-udev.service.8
 
 manpages = $(man1pages) $(man5pages) $(man7pages) $(man8pages)
 
-.PHONY: install clean archive rpm testimage test all check AUTHORS doc dracut-version.sh
+.PHONY: install clean archive rpm srpm testimage test all check AUTHORS doc dracut-version.sh
 
-all: dracut-version.sh dracut-install skipcpio/skipcpio
+all: dracut-version.sh dracut.pc dracut-install skipcpio/skipcpio
+
+%.o : %.c
+	$(CC) -c $(CFLAGS) $(CPPFLAGS) $(KMOD_CFLAGS) $< -o $@
 
 DRACUT_INSTALL_OBJECTS = \
         install/dracut-install.o \
@@ -60,6 +69,10 @@ install/util.o: install/util.c install/util.h install/macro.h install/log.h
 install/strv.o: install/strv.c install/strv.h install/util.h install/macro.h install/log.h
 
 install/dracut-install: $(DRACUT_INSTALL_OBJECTS)
+	$(CC) $(LDFLAGS) -o $@ $(DRACUT_INSTALL_OBJECTS) $(LDLIBS) $(FTS_LIBS) $(KMOD_LIBS)
+
+logtee: logtee.c
+	$(CC) $(LDFLAGS) -o $@ $<
 
 dracut-install: install/dracut-install
 	ln -fs $< $@
@@ -81,22 +94,37 @@ all: doc
 endif
 
 %: %.xml
-	xsltproc -o $@ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
+	@rm -f -- "$@"
+	xsltproc -o "$@" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
 
 %.xml: %.asc
-	asciidoc -d manpage -b docbook -o $@ $<
+	@rm -f -- "$@"
+	asciidoc -a "version=$(DRACUT_FULL_VERSION)" -d manpage -b docbook -o "$@" $<
 
 dracut.8: dracut.usage.asc dracut.8.asc
 
 dracut.html: dracut.asc $(manpages) dracut.css dracut.usage.asc
-	asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc
+	@rm -f -- dracut.xml
+	asciidoc -a "mainversion=$(DRACUT_MAIN_VERSION)" \
+		-a "version=$(DRACUT_FULL_VERSION)" \
+		-a numbered \
+		-d book -b docbook -o dracut.xml dracut.asc
+	@rm -f -- dracut.html
 	xsltproc -o dracut.html --xinclude -nonet \
 		--stringparam custom.css.source dracut.css \
 		--stringparam generate.css.header 1 \
 		http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
-	rm -f -- dracut.xml
+	@rm -f -- dracut.xml
 
-install: dracut-version.sh
+dracut.pc: Makefile.inc Makefile
+	@echo "Name: dracut" > dracut.pc
+	@echo "Description: dracut" >> dracut.pc
+	@echo "Version: $(DRACUT_FULL_VERSION)" >> dracut.pc
+	@echo "dracutdir=$(pkglibdir)" >> dracut.pc
+	@echo "dracutmodulesdir=$(pkglibdir)/modules.d" >> dracut.pc
+	@echo "dracutconfdir=$(pkglibdir)/dracut.conf.d" >> dracut.pc
+
+install: all
 	mkdir -p $(DESTDIR)$(pkglibdir)
 	mkdir -p $(DESTDIR)$(bindir)
 	mkdir -p $(DESTDIR)$(sysconfdir)
@@ -109,6 +137,7 @@ install: dracut-version.sh
 	install -m 0644 dracut.conf $(DESTDIR)$(sysconfdir)/dracut.conf
 	mkdir -p $(DESTDIR)$(sysconfdir)/dracut.conf.d
 	mkdir -p $(DESTDIR)$(pkglibdir)/dracut.conf.d
+	install -m 0755 dracut-init.sh $(DESTDIR)$(pkglibdir)/dracut-init.sh
 	install -m 0755 dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions.sh
 	install -m 0755 dracut-version.sh $(DESTDIR)$(pkglibdir)/dracut-version.sh
 	ln -fs dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions
@@ -124,10 +153,10 @@ ifneq ($(enable_documentation),no)
 endif
 	if [ -n "$(systemdsystemunitdir)" ]; then \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
-		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
-		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants; \
+		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
+		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants; \
 		ln -s ../dracut-shutdown.service \
-		$(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants/dracut-shutdown.service; \
+		$(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants/dracut-shutdown.service; \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants; \
 		for i in \
 		    dracut-cmdline.service \
@@ -138,7 +167,7 @@ endif
 		    dracut-pre-trigger.service \
 		    dracut-pre-udev.service \
 		    ; do \
-			ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
+			ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
 			ln -s ../$$i \
 			$(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants/$$i; \
 		done \
@@ -155,9 +184,12 @@ endif
 	mkdir -p $(DESTDIR)${bashcompletiondir}
 	install -m 0644 dracut-bash-completion.sh $(DESTDIR)${bashcompletiondir}/dracut
 	install -m 0644 lsinitrd-bash-completion.sh $(DESTDIR)${bashcompletiondir}/lsinitrd
+	mkdir -p $(DESTDIR)${pkgconfigdatadir}
+	install -m 0644 dracut.pc $(DESTDIR)${pkgconfigdatadir}/dracut.pc
 
 dracut-version.sh:
-	@echo "DRACUT_VERSION=$(VERSION)$(GITVERSION)" > dracut-version.sh
+	@rm -f dracut-version.sh
+	@echo "DRACUT_VERSION=$(DRACUT_FULL_VERSION)" > dracut-version.sh
 
 clean:
 	$(RM) *~
@@ -172,33 +204,47 @@ clean:
 	$(RM) $(manpages) dracut.html
 	$(MAKE) -C test clean
 
-dist: dracut-$(VERSION).tar.xz
+dist: dracut-$(DRACUT_MAIN_VERSION).tar.xz
 
-dracut-$(VERSION).tar.xz: doc syncheck
-	@echo "DRACUT_VERSION=$(VERSION)" > dracut-version.sh
-	git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ > dracut-$(VERSION).tar
-	mkdir -p dracut-$(VERSION)
-	for i in $(manpages) dracut.html dracut-version.sh; do [ "$${i%/*}" != "$$i" ] && mkdir -p "dracut-$(VERSION)/$${i%/*}"; cp "$$i" "dracut-$(VERSION)/$$i"; done
-	tar --owner=root --group=root -rf dracut-$(VERSION).tar $$(find dracut-$(VERSION) -type f)
-	rm -fr -- dracut-$(VERSION).tar.xz dracut-$(VERSION)
-	xz -9 dracut-$(VERSION).tar
-	rm -f -- dracut-$(VERSION).tar
+dracut-$(DRACUT_MAIN_VERSION).tar.xz: doc syncheck
+	@echo "DRACUT_VERSION=$(DRACUT_MAIN_VERSION)" > dracut-version.sh
+	git archive --format=tar $(DRACUT_MAIN_VERSION) --prefix=dracut-$(DRACUT_MAIN_VERSION)/ > dracut-$(DRACUT_MAIN_VERSION).tar
+	mkdir -p dracut-$(DRACUT_MAIN_VERSION)
+	for i in $(manpages) dracut.html dracut-version.sh; do [ "$${i%/*}" != "$$i" ] && mkdir -p "dracut-$(DRACUT_MAIN_VERSION)/$${i%/*}"; cp "$$i" "dracut-$(DRACUT_MAIN_VERSION)/$$i"; done
+	tar --owner=root --group=root -rf dracut-$(DRACUT_MAIN_VERSION).tar $$(find dracut-$(DRACUT_MAIN_VERSION) -type f)
+	rm -fr -- dracut-$(DRACUT_MAIN_VERSION).tar.xz dracut-$(DRACUT_MAIN_VERSION)
+	xz -9 dracut-$(DRACUT_MAIN_VERSION).tar
+	rm -f -- dracut-$(DRACUT_MAIN_VERSION).tar
 
-rpm: dracut-$(VERSION).tar.xz syncheck
-	rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
-	cp dracut-$(VERSION).tar.xz "$$rpmbuild"; \
-	LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
-	(cd "$$rpmbuild"; rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
+rpm: dracut-$(DRACUT_MAIN_VERSION).tar.xz syncheck
+	rpmbuild=$$(mktemp -d -p /var/tmp rpmbuild-dracut.XXXXXX); src=$$(pwd); \
+	cp dracut-$(DRACUT_MAIN_VERSION).tar.xz "$$rpmbuild"; \
+	LC_MESSAGES=C $$src/git2spec.pl $(DRACUT_MAIN_VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
+	(cd "$$rpmbuild"; \
+	wget https://www.gnu.org/licenses/lgpl-2.1.txt; \
+	rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
 	        --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
 		--define "_rpmdir $$PWD" -ba dracut.spec; ) && \
-	( mv "$$rpmbuild"/$$(arch)/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr -- "$$rpmbuild"; ls *.rpm )
+	( mv "$$rpmbuild"/{,$$(uname -m)/}*.rpm $(DESTDIR).; rm -fr -- "$$rpmbuild"; ls $(DESTDIR)*.rpm )
+
+srpm: dracut-$(DRACUT_MAIN_VERSION).tar.xz syncheck
+	rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
+	cp dracut-$(DRACUT_MAIN_VERSION).tar.xz "$$rpmbuild"; \
+	LC_MESSAGES=C $$src/git2spec.pl $(DRACUT_MAIN_VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
+	(cd "$$rpmbuild"; \
+	[ -f $$src/lgpl-2.1.txt ] && cp $$src/lgpl-2.1.txt . || wget https://www.gnu.org/licenses/lgpl-2.1.txt; \
+	rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
+	        --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
+		--define "_rpmdir $$PWD" -bs dracut.spec; ) && \
+	( mv "$$rpmbuild"/*.src.rpm $(DESTDIR).; rm -fr -- "$$rpmbuild"; ls $(DESTDIR)*.rpm )
 
 syncheck:
 	@ret=0;for i in dracut-initramfs-restore.sh modules.d/*/*.sh; do \
                 [ "$${i##*/}" = "module-setup.sh" ] && continue; \
                 read line < "$$i"; [ "$${line#*bash*}" != "$$line" ] && continue; \
 		[ $$V ] && echo "posix syntax check: $$i"; bash --posix -n "$$i" ; ret=$$(($$ret+$$?)); \
-		[ $$V ] && echo "checking for [[: $$i"; if grep -Fq '[[ ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains [["; fi \
+		[ $$V ] && echo "checking for [[: $$i"; if grep -Fq '[[ ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains [["; fi; \
+		[ $$V ] && echo "checking for echo -n: $$i"; if grep -Fq 'echo -n ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains echo -n"; fi \
 	done;exit $$ret
 	@ret=0;for i in *.sh mkinitrd-dracut.sh modules.d/*/*.sh \
 	                modules.d/*/module-setup.sh; do \
@@ -210,7 +256,11 @@ check: all syncheck rpm
 	@$(MAKE) -C test check
 
 testimage: all
-	./dracut.sh -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	./dracut.sh -N -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	@echo wrote  test-$(shell uname -r).img
+
+debugtestimage: all
+	./dracut.sh --debug -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img
 
 testimages: all
@@ -219,16 +269,24 @@ testimages: all
 	./dracut.sh -l -a debug --no-kernel -f test-dracut.img $(shell uname -r)
 	@echo wrote  test-dracut.img
 
+debughostimage: all
+	./dracut.sh --debug -H -l -f test-$(shell uname -r).img $(shell uname -r)
+	@echo wrote  test-$(shell uname -r).img
+
 hostimage: all
 	./dracut.sh -H -l -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img
 
-AUTHORS:
-	git shortlog  --numbered --summary -e |while read a rest; do echo $$rest;done > AUTHORS
+efi: all
+	./dracut.sh --uefi -H -l -f linux-$(shell uname -r).efi $(shell uname -r)
+	@echo wrote linux-$(shell uname -r).efi
 
-dracut.html.sign: dracut-$(VERSION).tar.xz dracut.html
-	gpg-sign-all dracut-$(VERSION).tar.xz dracut.html
+AUTHORS:
+	git shortlog  --numbered --summary -e |while read a rest || [ -n "$$rest" ]; do echo $$rest;done > AUTHORS
+
+dracut.html.sign: dracut-$(DRACUT_MAIN_VERSION).tar.xz dracut.html
+	gpg-sign-all dracut-$(DRACUT_MAIN_VERSION).tar.xz dracut.html
 
 upload: dracut.html.sign
-	kup put dracut-$(VERSION).tar.xz dracut-$(VERSION).tar.sign /pub/linux/utils/boot/dracut/
+	kup put dracut-$(DRACUT_MAIN_VERSION).tar.xz dracut-$(DRACUT_MAIN_VERSION).tar.sign /pub/linux/utils/boot/dracut/
 	kup put dracut.html dracut.html.sign /pub/linux/utils/boot/dracut/

PKGBUILD

@@ -1,6 +1,6 @@
 pkgname=dracut-git
-pkgver=$(date +%s)
-pkgrel=$(git log --pretty=format:%h |head -n 1)
+pkgver=1
+pkgrel=1
 pkgdesc="Initramfs generation utility"
 arch=('i686' 'x86_64')
 url="https://dracut.wiki.kernel.org/"
@@ -14,8 +14,25 @@ backup=(etc/dracut.conf)
 source=()
 md5sums=()
 
+# out of tree builds disallowed for this PKGFILE
+BUILDDIR="${PWD}"
+PKGDEST="${PWD}"
+SRCDEST=""
+SRCPKGDEST=""
+LOGDEST=""
+
+pkgver() {
+  cd ..
+  desc="$(git describe)"
+  printf "%s.%s.%s" ${desc//-/ }
+}
+
 build() {
   cd ..
   make sysconfdir=/etc || return 1
+}
+
+package() {
+  cd ..
   make DESTDIR="${pkgdir}" sysconfdir=/etc install || return 1
 }

README.cross

@@ -0,0 +1,70 @@
+Dracut supports running against a sysroot directory that is different
+from the actual root (/) directory of the running system. It is most
+useful for creating/bootstrapping a new system that may or may not be
+using the same CPU architecture as the host system, i.e. building a
+whole Linux system with a cross-compiler framework like Yocto.
+
+The user-visible frontend change is the introduction of a new option
+called "-r" or "--sysroot". It expects a directory that contains the
+complete Linux system that has all the files (kernel drivers, firmware,
+executables, libraries and others) necessary to construct the initramfs.
+
+E.g: dracut --sysroot /path/to/sysroot initramfs.img kernelversion
+
+To support this, a new global variable was introduced inside dracut.
+This variable is called "dracutsysrootdir" and all the files installed
+into the initramfs image is searched relative to the sysroot directory.
+This variable can also be set externally to dracut without using option
+-r/--sysroot.
+
+There are other details that are necessary to tweak to be able to
+run on cross-compiled (a.k.a. foreign) binaries.
+
+dracut uses these crucial utilities during its operation:
+
+ldd
+===
+It lists dynamic library dependencies for executables or libraries
+
+ldconfig
+========
+It creates /etc/ld.so.cache, i.e. the cached information about libraries
+known to the system.
+
+These utilities the way they exist on the host system only work on
+the host system.
+
+To support cross-compiled binaries, a different ldd variant is needed that
+works on those binaries. One such ldd script is found at
+https://gist.github.com/jerome-pouiller/c403786c1394f53f44a3b61214489e6f
+
+ldconfig in GLIBC as is does support a sysroot with its -r option.
+
+Extra environment variables needed to run dracut on the sysroot are
+documented in the dracut(8) man page.
+
+For the Plymouth boot splash to be added to the initramfs image,
+this gitlab PR is needed for Plymouth:
+https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/72
+
+Extensions to be used with Yocto
+================================
+
+examples/yocto/classes/dracut.bbclass:
+  Bitbake class for running dracut during the "do_rootfs" stage of
+  creating a distribution image and from the postinstall script of
+  a package. A kernel recipe needs this line to activate it:
+
+  inherit dracut
+
+examples/yocto/postinst-intercepts/execute_dracut
+  The "intercept" script used during "do_rootfs" mentioned above.
+
+examples/yocto/recipes/cross-compiler-ldd_git.bb
+  Package recipe for the cross-compiler-ldd script from the above link.
+
+All the above three need to be added to a Yocto layer to their
+proper locations.
+
+They were tested on Yocto 2.7 with MACHINE="intel-core2-32" and
+MACHINE="genericx86-64".

README.md

@@ -1,12 +1,19 @@
 dracut
-------
-dracut is a new initramfs infrastructure.
+====
 
-Information about the initial goals and aims can be found at
-https://fedoraproject.org/wiki/Initrdrewrite
+dracut is an event driven initramfs infrastructure.
 
-Unlike existing initramfs's, this is an attempt at having as little as
-possible hard-coded into the initramfs as possible.  The initramfs has
+[![Contributor Covenant](https://img.shields.io/badge/Contributor%20Covenant-v2.0%20adopted-ff69b4.svg)](.github/CODE_OF_CONDUCT.md) 
+[![Build Status](https://travis-ci.org/dracutdevs/dracut.svg?branch=master)](https://travis-ci.org/dracutdevs/dracut)
+[![Fedora-31](https://github.com/dracutdevs/dracut/workflows/Fedora-31/badge.svg?branch=master)](https://github.com/dracutdevs/dracut/actions?query=workflow%3AFedora-31)
+[![Fedora-32](https://github.com/dracutdevs/dracut/workflows/Fedora-32/badge.svg?branch=master)](https://github.com/dracutdevs/dracut/actions?query=workflow%3AFedora-32)
+
+dracut (the tool) is used to create an initramfs image by copying tools
+and files from an installed system and combining it with the
+dracut framework, usually found in /usr/lib/dracut/modules.d.
+
+Unlike other implementations, dracut hard-codes as little
+as possible into the initramfs. The initramfs has
 (basically) one purpose in life -- getting the rootfs mounted so that
 we can transition to the real rootfs.  This is all driven off of
 device availability.  Therefore, instead of scripts hard-coded to do
@@ -14,10 +21,7 @@ various things, we depend on udev to create device nodes for us and
 then when we have the rootfs's device node, we mount and carry on.
 This helps to keep the time required in the initramfs as little as
 possible so that things like a 5 second boot aren't made impossible as
-a result of the very existence of an initramfs.  It's likely that
-we'll grow some hooks for running arbitrary commands in the flow of
-the script, but it's worth trying to resist the urge as much as we can
-as hooks are guaranteed to be the path to slow-down.
+a result of the very existence of an initramfs.
 
 Most of the initramfs generation functionality in dracut is provided by a bunch
 of generator modules that are sourced by the main dracut script to install
@@ -51,7 +55,7 @@ possible.  Every distribution has their own tool here and it's not
 something which is really interesting to have separate across them.
 So contributions to help decrease the distro-dependencies are welcome.
 
-Currently dracut lives on kernel.org.
+Currently dracut lives on github.com and kernel.org.
 
 The tarballs can be found here:
 	http://www.kernel.org/pub/linux/utils/boot/dracut/
@@ -62,21 +66,14 @@ Git:
 	http://git.kernel.org/pub/scm/boot/dracut/dracut.git
 	https://git.kernel.org/pub/scm/boot/dracut/dracut.git
 
-	git://github.com/haraldh/dracut.git
-
-	git://dracut.git.sourceforge.net/gitroot/dracut/dracut
+	git@github.com:dracutdevs/dracut.git
 
 Git Web:
-	http://git.kernel.org/?p=boot/dracut/dracut.git
+	https://github.com/dracutdevs/dracut.git
 
-	https://haraldh@github.com/haraldh/dracut.git
+        http://git.kernel.org/?p=boot/dracut/dracut.git
 
-	http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut
-
-Git Web RSS Feed:
-	http://git.kernel.org/?p=boot/dracut/dracut.git;a=rss
-
-Project Page:
+Project Documentation:
 	http://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html
 
 Project Wiki:

README.testsuite

@@ -1,14 +1,29 @@
 For the testsuite to work, you will have to install at least the following software packages:
-dash
-asciidoc
-mdadm
-lvm2
-cryptsetup
-nfs-utils
-netbsd-iscsi
-nbd
-dhcp (dhcp-server on openSUSE)
-iscsi-initiator-utils
+dash \
+asciidoc \
+mdadm \
+lvm2 \
+dmraid \
+cryptsetup \
+nfs-utils \
+nbd \
+dhcp-server \
+scsi-target-utils \
+iscsi-initiator-utils \
+strace \
+syslinux \
+python-imgcreate \
+genisoimage \
+btrfs-progs \
+kmod-devel \
+gcc \
+bzip2 \
+xz \
+tar \
+wget \
+rpm-build \
+${NULL}
+
 TEST-04-FULL-SYSTEMD: systemd >= 187
 
 How to run the testsuite:

TODO

@@ -6,6 +6,7 @@ Items are ordered in priority.
 
 INITRAMFS TODO
 
+- search domain string
 - allow dual stack configuration (IPv4, IPv6) for the same interface
 - "bind-mount" kernel drivers in real root for the rescue image,
   if the real root does not have any kernel modules for this kernel
@@ -17,17 +18,15 @@ INITRAMFS TODO
 - put mount hook in main initqueue loop / careful about resume!
 - the hard-coded list of udev rules that we care about is kind of lame.
 - panic fallback
-- bridging/bonding without "netroot=" https://bugzilla.redhat.com/show_bug.cgi?id=822750
 - progress indication for fsck https://bugzilla.redhat.com/show_bug.cgi?id=827118
 - domain, searchdomain https://bugzilla.redhat.com/show_bug.cgi?id=840778
-- disable write-ifcfg https://bugzilla.redhat.com/show_bug.cgi?id=840784
-- check for /var to be mounted in convertfs https://bugzilla.redhat.com/show_bug.cgi?id=848172
 - probably fix "--include" https://bugzilla.redhat.com/show_bug.cgi?id=849338
 
 GENERATOR TODO
 
 - report errors on missing files in check()
 - remove wait for swap devs, if no "resume=" is given on the kernel command line
+- remove wait for swap devs, if the "resume" dracut module is not included (omitted)
 - add presets (predefined set of modules)
 - add interpreter/plugin-scripts to be sourced at the beginning or end (can use dracut-functions)
 - add mechanism for module specific command line options
@@ -47,3 +46,6 @@ Future Enhancement Requests
 - run ssh server to enter crypto password or perform debugging (supported by debian)
 - https://bugzilla.redhat.com/show_bug.cgi?id=524727 - dracut + encrypted root + networking
 
+- lsinitrd --print-cmdline
+- dracut --print-cmdline error if additional arguments
+- library for cmdline

configure

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # We don't support srcdir != builddir
 echo \#buildapi-variable-no-builddir >/dev/null
@@ -9,6 +7,9 @@ prefix=/usr
 
 enable_documentation=yes
 
+CC="${CC:-cc}"
+PKG_CONFIG="${PKG_CONFIG:-pkg-config}"
+
 # Little helper function for reading args from the commandline.
 # it automatically handles -a b and -a=b variants, and returns 1 if
 # we need to shift $3.
@@ -52,6 +53,53 @@ while (($# > 0)); do
     shift
 done
 
+if ! ${PKG_CONFIG} --exists --print-errors " libkmod >= 23 "; then
+    echo "dracut needs pkg-config and libkmod >= 23." >&2
+    exit 1
+fi
+
+cat <<EOF >conftest.c
+#include <fts.h>
+int main() {
+	return 0;
+}
+EOF
+
+${CC} $CFLAGS $LDFLAGS conftest.c >/dev/null 2>&1
+ret=$?
+rm -f conftest.c a.out
+
+# musl doesn't have fts.h included
+if test $ret -ne 0; then
+	echo "dracut needs fts development files." >&2
+	exit 1
+fi
+
+cat <<EOF >conftest.c
+#include <fts.h>
+int main(void) {
+	fts_open(0, 0, 0);
+	return 0;
+}
+EOF
+
+found=no
+for lib in "-lc" "-lfts"; do
+	${CC} $CFLAGS $LDFLAGS conftest.c -Wl,$lib >/dev/null 2>&1
+	ret=$?
+	if test $ret -eq 0; then
+		FTS_LIBS="$lib"
+		found=yes
+		break;
+	fi
+done
+rm -f conftest.c a.out
+
+if test $found = no; then
+	echo "dracut couldn't find usable fts library" >&2
+	exit 1
+fi
+
 cat > Makefile.inc.$$ <<EOF
 prefix ?= ${prefix}
 libdir ?= ${libdir:-${prefix}/lib}
@@ -61,6 +109,9 @@ sbindir ?= ${sbindir:-${prefix}/sbin}
 mandir ?= ${mandir:-${prefix}/share/man}
 enable_documentation ?= ${enable_documentation:-yes}
 bindir ?= ${bindir:-${prefix}/bin}
+KMOD_CFLAGS ?= $(${PKG_CONFIG} --cflags " libkmod >= 23 ")
+KMOD_LIBS ?= $(${PKG_CONFIG} --libs " libkmod >= 23 ")
+FTS_LIBS ?= ${FTS_LIBS}
 EOF
 
 {

dracut-bash-completion.sh

@@ -1,7 +1,4 @@
 #
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-#
 # Copyright 2013 Red Hat, Inc.  All rights reserved.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -32,15 +29,17 @@ _dracut() {
                               --hardlink --nohardlink --noprefix --mdadmconf --nomdadmconf
                               --lvmconf --nolvmconf --debug --profile --verbose --quiet
                               --local --hostonly --no-hostonly --fstab --help --bzip2 --lzma
-                              --xz --no-compress --gzip --list-modules --show-modules --keep
+                              --xz --zstd --no-compress --gzip --list-modules --show-modules --keep
                               --printsize --regenerate-all --noimageifnotneeded --early-microcode
-                              --no-early-microcode --print-cmdline --prelink --noprelink'
+                              --no-early-microcode --print-cmdline --reproducible --uefi'
 
                        [ARG]='-a -m -o -d -I -k -c -L --kver --add --force-add --add-drivers
                               --omit-drivers --modules --omit --drivers --filesystems --install
                               --fwdir --libdirs --fscks --add-fstab --mount --device --nofscks
                               --kmoddir --conf --confdir --tmpdir --stdlog --compress --prefix
-                              --kernel-cmdline --sshkey --persistent-policy'
+                              --kernel-cmdline --sshkey --persistent-policy --install-optional
+                              --loginstall --uefi-stub --kernel-image
+                              '
         )
 
         if __contains_word "$prev" ${OPTS[ARG]}; then
@@ -49,7 +48,7 @@ _dracut() {
                                 comps=$(compgen -d -- "$cur")
                                 compopt -o filenames
                         ;;
-                        -c|--conf|--sshkey|--add-fstab|--add-device|-I|--install)
+                        -c|--conf|--sshkey|--add-fstab|--add-device|-I|--install|--install-optional)
                                 comps=$(compgen -f -- "$cur")
                                 compopt -o filenames
                         ;;
@@ -74,6 +73,17 @@ _dracut() {
                 COMPREPLY=( $(compgen -W '${OPTS[*]}' -- "$cur") )
                 return 0
         fi
+
+        local args
+        _count_args
+        if [[ $args -eq 1 ]]; then
+                _filedir
+                return 0
+        elif [[ $args -eq 2 ]]; then
+                comps=$(cd /lib/modules; echo [0-9]*)
+                COMPREPLY=( $(compgen -W '$comps' -- "$cur") )
+                return 0
+        fi
 }
 
 complete -F _dracut dracut

dracut-catimages.sh

@@ -1,6 +1,4 @@
 #!/bin/bash --norc
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Copyright 2009 Red Hat, Inc.  All rights reserved.
 #

dracut-initramfs-restore.sh

@@ -1,13 +1,21 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 set -e
 
+# do some sanity checks first
+[ -e /run/initramfs/bin/sh ] && exit 0
+[ -e /run/initramfs/.need_shutdown ] || exit 0
+
 KERNEL_VERSION="$(uname -r)"
 
+[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
+SKIP="$dracutbasedir/skipcpio"
+[[ -x $SKIP ]] || SKIP=cat
+
 [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
 
+mount -o ro /boot &>/dev/null || true
+
 if [[ $MACHINE_ID ]] && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
     IMG="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
 fi
@@ -16,11 +24,14 @@ fi
 cd /run/initramfs
 
 [ -f .need_shutdown -a -f "$IMG" ] || exit 1
-if zcat "$IMG"  | cpio -id --quiet >/dev/null; then
+
+if $SKIP "$IMG" | zcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then
     rm -f -- .need_shutdown
-elif xzcat "$IMG"  | cpio -id --quiet >/dev/null; then
+elif $SKIP "$IMG" | xzcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then
     rm -f -- .need_shutdown
-elif lz4 -d -c "$IMG"  | cpio -id --quiet >/dev/null; then
+elif $SKIP "$IMG" | lz4 -d -c | cpio -id --no-absolute-filenames --quiet >/dev/null; then
+    rm -f -- .need_shutdown
+elif $SKIP "$IMG" | zstd -d -c | cpio -id --no-absolute-filenames --quiet >/dev/null; then
     rm -f -- .need_shutdown
 else
     # something failed, so we clean up
@@ -29,4 +40,18 @@ else
     exit 1
 fi
 
+if [[ -d squash ]]; then
+    unsquashfs -no-xattrs -f -d . squash/root.img >/dev/null
+    if [ $? -ne 0 ]; then
+        echo "Squash module is enabled for this initramfs but failed to unpack squash/root.img" >&2
+        rm -f -- /run/initramfs/shutdown
+        exit 1
+    fi
+fi
+
+if [ -e /etc/selinux/config -a -x /usr/sbin/setfiles ] ; then
+    . /etc/selinux/config
+    /usr/sbin/setfiles -v -r /run/initramfs /etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts /run/initramfs > /dev/null
+fi
+
 exit 0

dracut-logger.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 et filetype=sh
 #
 # logging faciality module for dracut both at build- and boot-time
 #
@@ -150,8 +148,7 @@ dlog_init() {
             && type -P systemd-cat &>/dev/null \
             && systemctl --quiet is-active systemd-journald.socket &>/dev/null \
             && { echo "dracut-$DRACUT_VERSION" | systemd-cat -t 'dracut' &>/dev/null; } ; then
-            readonly _dlogdir="$(mktemp --tmpdir="$TMPDIR/" -d -t dracut-log.XXXXXX)"
-            readonly _systemdcatfile="$_dlogdir/systemd-cat"
+            readonly _systemdcatfile="$DRACUT_TMPDIR/systemd-cat"
             mkfifo "$_systemdcatfile"
             readonly _dlogfd=15
             systemd-cat -t 'dracut' --level-prefix=true <"$_systemdcatfile" &
@@ -266,9 +263,9 @@ _lvl2syspri() {
 # Conversion is done as follows:
 #
 # <tt>
-#   FATAL(1) -> LOG_EMERG (0)
+#   none     -> LOG_EMERG (0)
 #   none     -> LOG_ALERT (1)
-#   none     -> LOG_CRIT (2)
+#   FATAL(1) -> LOG_CRIT (2)
 #   ERROR(2) -> LOG_ERR (3)
 #   WARN(3)  -> LOG_WARNING (4)
 #   none     -> LOG_NOTICE (5)
@@ -282,7 +279,7 @@ _dlvl2syslvl() {
     local lvl
 
     case "$1" in
-        1) lvl=0;;
+        1) lvl=2;;
         2) lvl=3;;
         3) lvl=4;;
         4) lvl=6;;
@@ -326,7 +323,7 @@ _do_dlog() {
     local msg="$*"
     local lmsg="$lvlc: $*"
 
-    (( $lvl <= $stdloglvl )) && echo "$msg" >&2
+    (( $lvl <= $stdloglvl )) && printf -- 'dracut: %s\n' "$msg" >&2
 
     if (( $lvl <= $sysloglvl )); then
         if [[ "$_dlogfd" ]]; then
@@ -367,7 +364,7 @@ dlog() {
     if (( $# > 1 )); then
         _do_dlog "$@"
     else
-        while read line; do
+        while read line || [ -n "$line" ]; do
             _do_dlog "$1" "$line"
         done
     fi

dracut.8.asc

@@ -3,10 +3,11 @@ DRACUT(8)
 :doctype: manpage
 :man source:   dracut
 :man manual:   dracut
+:man version:  {version}
 
 NAME
 ----
-dracut - low-level tool for generating an initramfs image
+dracut - low-level tool for generating an initramfs/initrd image
 
 SYNOPSIS
 --------
@@ -28,10 +29,12 @@ At boot time, the kernel unpacks that archive into RAM disk, mounts and uses it
 as initial root file system. All finding of the root device happens in this
 early userspace.
 
+Initramfs images are also called "initrd".
+
 For a complete list of kernel command line options see *dracut.cmdline*(7).
 
 If you are dropped to an emergency shell, while booting your initramfs,
-the file _/run/initramfs/rdsosreport.txt_ is created, which can be safed to a
+the file _/run/initramfs/rdsosreport.txt_ is created, which can be saved to a
 (to be mounted by hand) partition (usually /boot) or a USB stick.
 Additional debugging info can be produced by adding **rd.debug** to the kernel
 command line. _/run/initramfs/rdsosreport.txt_ contains all logs and the output
@@ -54,33 +57,6 @@ OPTIONS
 **-f, --force**::
     overwrite existing initramfs file.
 
-**-m, --modules** _<list of dracut modules>_::
-    specify a space-separated list of dracut modules to call when building the
-    initramfs. Modules are located in _/usr/lib/dracut/modules.d_. This
-    parameter can be specified multiple times.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --modules "module1 module2"  ...
-----
-===============================
-
-**-o, --omit** _<list of dracut modules>_::
-    omit a space-separated list of dracut modules. This parameter can be
-    specified multiple times.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --omit "module1 module2"  ...
-----
-===============================
-
 **-a, --add** _<list of dracut modules>_::
     add a space-separated list of dracut modules to the default set of modules.
     This parameter can be specified multiple times.
@@ -108,6 +84,35 @@ example:
 ----
 ===============================
 
+**-o, --omit** _<list of dracut modules>_::
+    omit a space-separated list of dracut modules. This parameter can be
+    specified multiple times.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --omit "module1 module2"  ...
+----
+===============================
+
+**-m, --modules** _<list of dracut modules>_::
+    specify a space-separated list of dracut modules to call when building the
+    initramfs. Modules are located in _/usr/lib/dracut/modules.d_. This
+    parameter can be specified multiple times.
+    This option forces dracut to only include the specified dracut modules.
+    In most cases the "--add" option is what you want to use.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --modules "module1 module2"  ...
+----
+===============================
+
 **-d, --drivers** _<list of kernel modules>_::
     specify a space-separated list of kernel modules to exclusively include
     in the initramfs. The kernel modules have to be specified without the ".ko"
@@ -136,6 +141,19 @@ example:
 ----
 ===============================
 
+**--force-drivers** _<list of kernel modules>_::
+    See add-drivers above. But in this case it is ensured that the drivers
+    are tried to be loaded early via modprobe.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --force-drivers "kmodule1 kmodule2"  ...
+----
+===============================
+
 **--omit-drivers** _<list of kernel modules>_::
     specify a space-separated list of kernel modules not to add to the
     initramfs.
@@ -226,12 +244,6 @@ example:
 **--nostrip**::
     do not strip binaries in the initramfs
 
-**--prelink**::
-    prelink binaries in the initramfs (default)
-
-**--noprelink**::
-    do not prelink binaries in the initramfs
-
 **--hardlink**::
     hardlink files in the initramfs (default)
 
@@ -253,6 +265,9 @@ example:
 **-v, --verbose**::
     increase verbosity level (default is info(4))
 
+**--version**::
+    display version and exit
+
 **-q, --quiet**:: decrease verbosity level (default is info(4))
 
 **-c, --conf** _<dracut configuration file>_::
@@ -273,6 +288,15 @@ Default:
 Default:
    _/var/tmp_
 
+**-r, --sysroot** _<sysroot directory>_::
+    specify the sysroot directory to collect files from.
+    This is useful to create the initramfs image from
+    a cross-compiled sysroot directory. For the extra helper
+    variables, see *ENVIRONMENT* below.
++
+Default:
+    _empty_
+
 **--sshkey** _<sshkey file>_:: ssh key file used with ssh-client module.
 
 **--logfile** _<logfile>_:: logfile to use; overrides any setting from
@@ -300,6 +324,22 @@ provide a valid _/etc/fstab_.
 **-N, --no-hostonly**::
     Disable Host-Only mode
 
+**--hostonly-cmdline**:
+    Store kernel command line arguments needed in the initramfs
+
+**--no-hostonly-cmdline**:
+    Do not store kernel command line arguments needed in the initramfs
+
+**--no-hostonly-default-device**:
+    Do not generate implicit host devices like root, swap, fstab, etc.
+    Use "--mount" or "--add-device" to explicitly add devices as needed.
+
+**--hostonly-i18n**:
+    Install only needed keyboard and font files according to the host configuration (default).
+
+**--no-hostonly-i18n**:
+    Install all keyboard and font files available.
+
 **--persistent-policy** _<policy>_::
     Use _<policy>_ to address disks and partitions.
     _<policy>_ can be any directory name found in /dev/disk.
@@ -311,9 +351,17 @@ provide a valid _/etc/fstab_.
 **--add-fstab** _<filename>_::
     Add entries of _<filename>_ to the initramfs /etc/fstab.
 
-**--mount** "_<device>_ _<mountpoint>_ _<filesystem type>_ _<filesystem options>_"::
-    Mount _<device>_ on _<mountpoint>_ with _<filesystem type>_ and _<filesystem
-    options>_ in the initramfs
+**--mount** "_<device>_ _<mountpoint>_ _<filesystem type>_ [_<filesystem options>_ [_<dump frequency>_ [_<fsck order>_]]]"::
+    Mount _<device>_ on _<mountpoint>_ with _<filesystem type>_ in the
+    initramfs. _<filesystem options>_, _<dump options>_ and _<fsck order>_ can
+    be specified, see fstab manpage for the details.
+    The default _<filesystem options>_ is "defaults".
+    The default _<dump frequency>_ is "0".
+    the default _<fsck order>_ is "2".
+
+**--mount** "_<mountpoint>_"::
+    Like above, but _<device>_, _<filesystem type>_ and _<filesystem options>_
+    are determined by looking at the current mounts.
 
 **--add-device** _<device>_ ::
     Bring up _<device>_ in initramfs, _<device>_ should be the device name.
@@ -339,6 +387,9 @@ example:
 ----
 ===============================
 
+**--install-optional** _<file list>_::
+    install the space separated list of files into the initramfs, if they exist.
+
 **--gzip**::
     Compress the generated initramfs using gzip. This will be done by default,
     unless another compression option or --no-compress is passed. Equivalent to
@@ -388,17 +439,32 @@ Make sure your kernel has lz4 decompression support compiled in, otherwise you
 will not be able to boot.
 ====
 
+**--zstd**::
+    Compress the generated initramfs using Zstandard.
+[WARNING]
+====
+Make sure your kernel has zstd decompression support compiled in, otherwise you
+will not be able to boot.
+====
+
 **--compress** _<compressor>_::
     Compress the generated initramfs using the passed compression program. If
     you pass it just the name of a compression program, it will call that
     program with known-working arguments. If you pass a quoted string with
     arguments, it will be called with exactly those arguments. Depending on what
     you pass, this may result in an initramfs that the kernel cannot decompress.
+    The default value can also be set via the _INITRD_COMPRESS_ environment variable.
 
 **--no-compress**::
     Do not compress the generated initramfs. This will override any other
     compression options.
 
+**--reproducible**::
+    Create reproducible images.
+
+**--no-reproducible**::
+    Do not create reproducible images.
+
 **--list-modules**::
     List all available dracut modules.
 
@@ -433,6 +499,126 @@ will not be able to boot.
     Regenerate all initramfs images at the default location with the kernel
     versions found on the system. Additional parameters are passed through.
 
+**--loginstall _<DIR>_**::
+    Log all files installed from the host to _<DIR>_.
+
+**--uefi**::
+    Instead of creating an initramfs image, dracut will create an UEFI executable,
+    which can be executed by an UEFI BIOS. The default output filename is
+    _<EFI>/EFI/Linux/linux-$kernel$-<MACHINE_ID>-<BUILD_ID>.efi_. <EFI> might be
+    _/efi_, _/boot_ or _/boot/efi_ depending on where the ESP partition is mounted.
+    The <BUILD_ID> is taken from BUILD_ID in _/usr/lib/os-release_ or if it exists
+    _/etc/os-release_ and is left out, if BUILD_ID is non-existant or empty.
+
+**--no-machineid**::
+    affects the default output filename of **--uefi** and will discard the <MACHINE_ID>
+    part.
+
+**--uefi-stub _<FILE>_**::
+    Specifies the UEFI stub loader, which will load the attached kernel, initramfs and
+    kernel command line and boots the kernel. The default is
+    _$prefix/lib/systemd/boot/efi/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+    or _$prefix/lib/gummiboot/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+
+**--uefi-splash-image _<FILE>_**::
+    Specifies the UEFI stub loader's splash image. Requires bitmap (**.bmp**) image
+    format.
+
+**--kernel-image _<FILE>_**::
+    Specifies the kernel image, which to include in the UEFI executable. The default is
+    _/lib/modules/<KERNEL-VERSION>/vmlinuz_ or _/boot/vmlinuz-<KERNEL-VERSION>_
+
+ENVIRONMENT
+-----------
+
+_INITRD_COMPRESS_::
+    sets the default compression program. See **--compress**.
+
+_DRACUT_LDCONFIG_::
+    sets the _ldconfig_ program path and options. Optional.
+    Used for **--sysroot**.
++
+Default:
+    _ldconfig_
+
+_DRACUT_LDD_::
+    sets the _ldd_ program path and options. Optional.
+    Used for **--sysroot**.
++
+Default:
+    _ldd_
+
+_DRACUT_TESTBIN_::
+    sets the initially tested binary for detecting library paths.
+    Optional. Used for **--sysroot**. In the cross-compiled sysroot,
+    the default value (_/bin/sh_) is unusable, as it is an absolute
+    symlink and points outside the sysroot directory.
++
+Default:
+    _/bin/sh_
+
+_DRACUT_INSTALL_::
+    overrides path and options for executing _dracut-install_ internally.
+    Optional. Can be used to debug _dracut-install_ while running the
+    main dracut script.
++
+Default:
+    _dracut-install_
++
+Example:
+    DRACUT_INSTALL="valgrind dracut-install"
+
+_DRACUT_COMPRESS_BZIP2_::
+_DRACUT_COMPRESS_BZIP2_::
+_DRACUT_COMPRESS_LBZIP2_::
+_DRACUT_COMPRESS_LZMA_::
+_DRACUT_COMPRESS_XZ_::
+_DRACUT_COMPRESS_GZIP_::
+_DRACUT_COMPRESS_PIGZ_::
+_DRACUT_COMPRESS_LZOP_::
+_DRACUT_COMPRESS_ZSTD_::
+_DRACUT_COMPRESS_LZ4_::
+_DRACUT_COMPRESS_CAT_::
+    overrides for compression utilities to support using them from
+    non-standard paths.
++
+Default values are the default compression utility names to be found in **PATH**.
+
+_DRACUT_ARCH_::
+    overrides the value of **uname -m**. Used for **--sysroot**.
++
+Default:
+    _empty_ (the value of **uname -m** on the host system)
+
+_SYSTEMD_VERSION_::
+    overrides systemd version. Used for **--sysroot**.
+
+_DRACUT_INSTALL_PATH_::
+    overrides **PATH** environment for **dracut-install** to look for
+    binaries relative to **--sysroot**. In a cross-compiled environment
+    (e.g. Yocto), PATH points to natively built binaries that are not
+    in the host's /bin, /usr/bin, etc. **dracut-install** still needs plain
+    /bin and /usr/bin that are relative to the cross-compiled sysroot.
++
+Default:
+    _PATH_
+
+_DRACUT_INSTALL_LOG_TARGET_::
+    overrides **DRACUT_LOG_TARGET** for **dracut-install**. It allows
+    running **dracut-install* to run with different log target that
+    **dracut** runs with.
++
+Default:
+    _DRACUT_LOG_TARGET_
+
+_DRACUT_INSTALL_LOG_LEVEL_::
+    overrides **DRACUT_LOG_LEVEL** for **dracut-install**. It allows
+    running **dracut-install* to run with different log level that
+    **dracut** runs with.
++
+Default:
+    _DRACUT_LOG_LEVEL_
+
 FILES
 -----
 _/var/log/dracut.log_::
@@ -476,18 +662,18 @@ Harald Hoyer
 
 Victor Lowther
 
+Amadeusz Żołnowski
+
+Hannes Reinecke
+
+Daniel Molkentin
+
+Will Woods
+
 Philippe Seewer
 
 Warren Togami
 
-Amadeusz Żołnowski
-
-Jeremy Katz
-
-David Dillow
-
-Will Woods
-
 SEE ALSO
 --------
-*dracut.cmdline*(7) *dracut.conf*(5)
+*dracut.cmdline*(7) *dracut.conf*(5) *lsinitrd*(1)

dracut.asc

@@ -1,8 +1,8 @@
-dracut
-======
-Harald Hoyer <harald@redhat.com>
-v3.0, October 2013
-
+dracut {mainversion}
+====================
+:author: Harald Hoyer
+:email: harald@redhat.com
+:revnumber: {version}
 :language: bash
 
 = Introduction
@@ -61,7 +61,7 @@ Depending on which algorithms were compiled statically into it, the kernel can
 currently unpack initrd/initramfs images compressed with gzip, bzip2 and LZMA.
 
 == Mount preparations
-dracut can generate a customized initrams image which contains only whatever is
+dracut can generate a customized initramfs image which contains only whatever is
 necessary to boot some particular computer, such as ATA, SCSI and filesystem
 kernel modules (host-only mode).
 
@@ -132,7 +132,7 @@ The following steps are executed during a shutdown:
 
 * systemd switches to the shutdown.target
 * systemd starts
-  /lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
+  $prefix/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
 * dracut-shutdown.service executes /usr/lib/dracut/dracut-initramfs-restore
   which unpacks the initramfs to /run/initramfs
 * systemd finishes shutdown.target
@@ -142,7 +142,7 @@ The following steps are executed during a shutdown:
 * if yes, it does a pivot_root to /run/initramfs and executes ./shutdown.
   The old root is then mounted on /oldroot.
   /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable.
-* shutdown will try to umount every /oldroot mount and calls the various
+* shutdown will try to unmount every /oldroot mount and calls the various
   shutdown hooks from the dracut modules
 
 This ensures, that all devices are disassembled and unmounted cleanly.

dracut.bootup.7.asc

@@ -3,6 +3,7 @@ DRACUT.BOOTUP(7)
 :doctype: manpage
 :man source:   dracut
 :man manual:   dracut
+:man version:  {version}
 
 NAME
 ----

dracut.cmdline.7.asc

@@ -3,6 +3,7 @@ DRACUT.CMDLINE(7)
 :doctype: manpage
 :man source:   dracut
 :man manual:   dracut
+:man version:  {version}
 
 NAME
 ----
@@ -32,7 +33,7 @@ line is the value, which is honored.
 Standard
 ~~~~~~~~
 **init=**__<path to real init>__::
-    specify the path to the init programm to be started after the initramfs has
+    specify the path to the init program to be started after the initramfs has
     finished
 
 **root=**__<path to blockdevice>__::
@@ -81,6 +82,14 @@ rootfstype=ext3
     enable autoassembly of special devices like cryptoLUKS, dmraid, mdraid or
     lvm. Default is off as of dracut version >= 024.
 
+**rd.hostonly=0**::
+    removes all compiled in configuration of the host system the initramfs image
+    was built on. This helps booting, if any disk layout changed, especially in
+    combination with rd.auto or other parameters specifying the layout.
+
+**rd.cmdline=ask**::
+    prompts the user for additional kernel command line parameters
+
 **rd.fstab=0**::
     do not honor special mount options for the root filesystem found in
     _/etc/fstab_ of the real root.
@@ -101,9 +110,33 @@ resume=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
     the init system performs fsck before remount, you might want to use this
     option to avoid duplication.
 
+iso-scan/filename
+~~~~~~~~~~~~~~~~~
+
+Mount all mountable devices and search for ISO pointed by the argument. When
+the ISO is found set it up as a loop device. Device containing this ISO
+image will stay mounted at /run/initramfs/isoscandev.
+Using iso-scan/filename with a Fedora/Red Hat/CentOS Live iso should just work
+by copying the original kernel cmdline parameters.
+
+[listing]
+.Example
+--
+menuentry 'Live Fedora 20' --class fedora --class gnu-linux --class gnu --class os {
+    set isolabel=Fedora-Live-LXDE-x86_64-20-1
+    set isofile="/boot/iso/Fedora-Live-LXDE-x86_64-20-1.iso"
+    loopback loop $isofile
+    linux (loop)/isolinux/vmlinuz0 boot=isolinux iso-scan/filename=$isofile root=live:LABEL=$isolabel ro rd.live.image quiet rhgb
+    initrd (loop)/isolinux/initrd0.img
+}
+--
 
 Misc
 ~~~~
+**rd.emergency=**__[reboot|poweroff|halt]__::
+    specify, what action to execute in case of a critical failure. rd.shell=0 also
+    be specified.
+
 **rd.driver.blacklist=**__<drivername>__[,__<drivername>__,...]::
     do not load kernel module <drivername>. This parameter can be specified
     multiple times.
@@ -117,11 +150,16 @@ Misc
     have been loaded. This parameter can be specified multiple times.
 
 **rd.retry=**__<seconds>__::
-    specify how long dracut should wait for devices to appear.
+    specify how long dracut should retry the initqueue to configure devices.
     The default is 30 seconds. After 2/3 of the time, degraded raids are force
     started. If you have hardware, which takes a very long time to announce its
     drives, you might want to extend this value.
 
+**rd.timeout=**__<seconds>__::
+    specify how long dracut should wait for devices to appear. The
+    default is '0', which means 'forever'. Note that this timeout
+    should be longer than rd.retry to allow for proper configuration.
+
 **rd.noverifyssl**::
     accept self-signed certificates for ssl downloads.
 
@@ -133,7 +171,7 @@ Misc
 Debug
 ~~~~~
 If you are dropped to an emergency shell, the file 
-_/run/initramfs/rdsosreport.txt_ is created, which can be safed to a (to be
+_/run/initramfs/rdsosreport.txt_ is created, which can be saved to a (to be
 mounted by hand) partition (usually /boot) or a USB stick. Additional debugging
 info can be produced by adding **rd.debug** to the kernel command line.
 _/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools.
@@ -153,9 +191,9 @@ It should be attached to any report about dracut problems.
     _/run/initramfs/init.log_.
     If "quiet" is set, it also logs to the console.
 
-**rd.memdebug=[0-3]**::
-    Print memory usage info at various points, set the verbose level from 0 to 3.
-+    
+**rd.memdebug=[0-5]**::
+    Print memory usage info at various points, set the verbose level from 0 to 5.
++
     Higher level means more debugging output:
 +
 ----
@@ -163,6 +201,14 @@ It should be attached to any report about dracut problems.
     1 - partial /proc/meminfo
     2 - /proc/meminfo
     3 - /proc/meminfo + /proc/slabinfo
+    4 - /proc/meminfo + /proc/slabinfo + memstrack summary
+        NOTE: memstrack is a memory tracing tool that tracks the total memory
+              consumption, and peak memory consumption of each kernel modules
+              and userspace progress during the whole initramfs runtime, report
+              is genereted and the end of initramsfs run.
+    5 - /proc/meminfo + /proc/slabinfo + memstrack (with top memory stacktrace)
+        NOTE: memstrack (with top memory stacktrace) will print top memory
+              allocation stack traces during the whole initramfs runtime.
 ----
 
 **rd.break**::
@@ -204,7 +250,7 @@ rd.vconsole.keymap=de-latin1-nodeadkeys
 [listing]
 .Example
 --
-rd.vconsole.font=LatArCyrHeb-16
+rd.vconsole.font=eurlatgr
 --
 
 **rd.vconsole.font.map=**__<console map base file name>__::
@@ -238,12 +284,12 @@ LVM
     disable LVM detection
 
 **rd.lvm.vg=**__<volume group name>__::
-    only activate the volume groups with the given name. rd.lvm.vg can be
-    specified multiple times on the kernel command line.
+    only activate all logical volumes in the the volume groups with the given name.
+    rd.lvm.vg can be specified multiple times on the kernel command line.
 
-**rd.lvm.lv=**__<logical volume name>__::
-    only activate the logical volumes with the given name. rd.lvm.lv can be
-    specified multiple times on the kernel command line.
+**rd.lvm.lv=**__<volume group name>/<logical volume name>__::
+    only activate the logical volumes with the given name.
+    rd.lvm.lv can be specified multiple times on the kernel command line.
 
 **rd.lvm.conf=0**::
     remove any _/etc/lvm/lvm.conf_, which may exist in the initramfs
@@ -259,6 +305,8 @@ crypto LUKS
     The comparisons also matches, if _<luks uuid>_ is only the beginning of the
     LUKS UUID, so you don't have to specify the full UUID.
     This parameter can be specified multiple times.
+    _<luks uuid>_ may be prefixed by the keyword `keysource:`, see
+    _rd.luks.key_ below.
 
 **rd.luks.allow-discards=**__<luks uuid>__::
     Allow  using  of discards (TRIM) requests for LUKS partitions with the given
@@ -273,24 +321,44 @@ crypto LUKS
 **rd.luks.crypttab=0**::
     do not check, if LUKS partition is in _/etc/crypttab_
 
+**rd.luks.timeout=**__<seconds>__::
+    specify how long dracut should wait when waiting for the user to enter the
+    password. This avoid blocking the boot if no password is entered. It does
+    not apply to luks key. The default is '0', which means 'forever'.
+
 crypto LUKS - key on removable device support
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-**rd.luks.key=**__<keypath>__:__<keydev>__:__<luksdev>__::
-    _keypath_ is a path to key file to look for. It's REQUIRED. When _keypath_
-    ends with '.gpg' it's considered to be key encrypted symmetrically with GPG.
-    You will be prompted for password on boot. GPG support comes with
-    'crypt-gpg' module which needs to be added explicitly.
+
+NB: If systemd is included in the dracut initrd, dracut's built in
+removable device keying support won't work. systemd will prompt for
+a password from the console even if you've supplied **rd.luks.key**.
+You may be able to use standard systemd *fstab*(5) syntax to
+get the same effect. If you do need **rd.luks.key** to work,
+you will have to exclude the "systemd" dracut module and any modules
+that depend on it. See *dracut.conf*(5) and
+https://bugzilla.redhat.com/show_bug.cgi?id=905683 for more
+information.
+
+**rd.luks.key=**_<keypath>[:<keydev>[:<luksdev>]]_::
+    _<keypath>_ is the pathname of a key file, relative to the root
+    of the filesystem on some device. It's REQUIRED. When
+    _<keypath>_ ends with '.gpg' it's considered to be key encrypted
+    symmetrically with GPG.  You will be prompted for the GPG password on
+    boot. GPG support comes with the 'crypt-gpg' module, which needs to be
+    added explicitly.
 +
-_keydev_ is a device on which key file resides. It might be kernel name of
-devices (should start with "/dev/"), UUID (prefixed with "UUID=") or label
-(prefix with "LABEL="). You don't have to specify full UUID. Just its beginning
-will suffice, even if its ambiguous. All matching devices will be probed.
-This parameter is recommended, but not required. If not present, all block
-devices will be probed, which may significantly increase boot time.
+_<keydev>_ identifies the device on which the key file resides. It may
+be the kernel name of the device (should start with "/dev/"), a UUID
+(prefixed with "UUID=") or a label (prefix with "LABEL="). You don't
+have to specify a full UUID. Just its beginning will suffice, even if
+its ambiguous. All matching devices will be probed.  This parameter is
+recommended, but not required. If it's not present, all block devices will
+be probed, which may significantly increase boot time.
 +
-If _luksdev_ is given, the specified key will only be applied for that LUKS
-device. Possible values are the same as for _keydev_. Unless you have several
-LUKS devices, you don't have to specify this parameter. The simplest usage is:
+If _<luksdev>_ is given, the specified key will only be used for
+the specified LUKS device. Possible values are the same as for
+_<keydev>_. Unless you have several LUKS devices, you don't have to
+specify this parameter. The simplest usage is:
 +
 [listing]
 .Example
@@ -299,28 +367,84 @@ rd.luks.key=/foo/bar.key
 --
 +
 As you see, you can skip colons in such a case.
-+
+
 [NOTE]
 ===============================
-dracut pipes key to cryptsetup with _-d -_ argument, therefore you need to pipe
-to crypsetup luksFormat with _-d -_, too!
+Your LUKS partition must match your key file.
 
-Here follows example for key encrypted with GPG:
+dracut provides keys to cryptsetup with _-d_ (an older alias for
+_--key-file_). This uses the entire binary
+content of the key file as part of the secret.  If
+you pipe a password into cryptsetup *without* _-d_ or _--key-file_,
+it will be treated as text user input, and only characters before
+the first newline will be used. Therefore, when you're creating
+an encrypted partition for dracut to mount, and you pipe a key into
+_cryptsetup luksFormat_,you must use _-d -_.
+
+Here is an example for a key encrypted with GPG (warning:
+_--batch-mode_ will overwrite the device without asking for
+confirmation):
 
 [listing]
 --
 gpg --quiet --decrypt rootkey.gpg | \
-cryptsetup -d - -v --cipher serpent-cbc-essiv:sha256 \
---key-size 256 luksFormat /dev/sda3
+cryptsetup --batch-mode --key-file - \
+           luksFormat /dev/sda47
 --
 
-If you use plain keys, just add path to _-d_ option:
+If you use unencrypted key files, just use the key file pathname
+instead of the standard input. For a random key with 256 bits of
+entropy, you might use:
 
 [listing]
 --
-cryptsetup -d rootkey.key -v --cipher serpent-cbc-essiv:sha256 \
- --key-size 256 luksFormat /dev/sda3
+head -32c /dev/urandom > rootkey.key
+cryptsetup --batch-mode --key-file rootkey.key \
+           luksFormat /dev/sda47
 --
+
+You can also use regular key files on an encrypted _keydev_.
+
+Compared to using GPG encrypted keyfiles on an unencrypted
+device this provides the following advantages:
+
+- you can unlock your disk(s) using multiple passphrases
+- better security by not loosing the key stretching mechanism
+
+To use an encrypted _keydev_ you *must* ensure that it becomes
+available by using the keyword `keysource`, e.g.
+`rd.luks.uuid=keysource:aaaa`
+_aaaa_ being the uuid of the encrypted _keydev_.
+
+Example:
+
+Lets assume you have three disks _A_, _B_ and _C_ with the uuids
+_aaaa_, _bbbb_ and _cccc_. +
+You want to unlock _A_ and _B_ using keyfile _keyfile_. +
+The unlocked volumes be _A'_, _B'_ and _C'_ with the uuids
+_AAAA_, _BBBB_ and _CCCC_. +
+_keyfile_ is saved on _C'_ as _/keyfile_.
+
+One luks keyslot of each _A_, _B_ and _C_ is setup with a
+passphrase. +
+Another luks keyslot of each _A_ and _B_ is setup with _keyfile_.
+
+To boot this configuration you could use:
+[listing]
+--
+rd.luks.uuid=aaaa
+rd.luks.uuid=bbbb
+rd.luks.uuid=keysource:cccc
+rd.luks.key=/keyfile:UUID=CCCC
+--
+Dracut asks for the passphrase for _C_ and uses the
+keyfile to unlock _A_ and _B_. +
+If getting the passphrase for _C_ fails it falls back to
+asking for the passphrases for _A_ and _B_.
+
+If you want _C'_ to stay unlocked, specify a luks name for
+it, e.g. `rd.luks.name=cccc=mykeys`, otherwise it gets closed
+when not needed anymore.
 ===============================
 
 MD RAID
@@ -354,6 +478,14 @@ DM RAID
    only activate the raid sets with the given UUID. This parameter can be
    specified multiple times.
 
+MULTIPATH
+~~~~~~~~~
+**rd.multipath=0**::
+   disable multipath detection
+
+**rd.multipath=default**::
+   use default multipath settings
+
 FIPS
 ~~~~
 **rd.fips**::
@@ -437,7 +569,7 @@ USB Android phone::
 * enp0s29u1u2
 =====================
 
-**ip=**__{dhcp|on|any|dhcp6|auto6|ibft}__::
+**ip=**__{dhcp|on|any|dhcp6|auto6|either6}__::
     dhcp|on|any::: get ip from dhcp server from all interfaces. If root=dhcp,
     loop sequentially through all interfaces (eth0, eth1, ...) and use the first
     with a valid DHCP root-path.
@@ -446,7 +578,7 @@ USB Android phone::
 
     dhcp6::: IPv6 DHCP
 
-    ibft::: iBFT autoconfiguration
+    either6::: if auto6 fails, then dhcp6
 
 **ip=**__<interface>__:__{dhcp|on|any|dhcp6|auto6}__[:[__<mtu>__][:__<macaddr>__]]::
     This parameter can be specified multiple times.
@@ -459,7 +591,7 @@ cannot be used in conjunction with the **ifname** argument for the
 same <interface>.
 =====================
 
-**ip=**__<client-IP>__:[__<peer>__]:__<gateway-IP>__:__<netmask>__:__<client_hostname>__:__<interface>__:__{none|off|dhcp|on|any|dhcp6|auto6|ibft}__:[:[__<mtu>__][:__<macaddr>__]]::
+**ip=**__<client-IP>__:[__<peer>__]:__<gateway-IP>__:__<netmask>__:__<client_hostname>__:__<interface>__:__{none|off|dhcp|on|any|dhcp6|auto6|ibft}__[:[__<mtu>__][:__<macaddr>__]]::
     explicit network configuration. If you want do define a IPv6 address, put it
     in brackets (e.g. [2001:DB8::1]). This parameter can be specified multiple
     times. __<peer>__ is optional and is the address of the remote endpoint
@@ -472,14 +604,34 @@ cannot be used in conjunction with the **ifname** argument for the
 same <interface>.
 =====================
 
+**ip=**__<client-IP>__:[__<peer>__]:__<gateway-IP>__:__<netmask>__:__<client_hostname>__:__<interface>__:__{none|off|dhcp|on|any|dhcp6|auto6|ibft}__[:[__<dns1>__][:__<dns2>__]]::
+    explicit network configuration. If you want do define a IPv6 address, put it
+    in brackets (e.g. [2001:DB8::1]). This parameter can be specified multiple
+    times. __<peer>__ is optional and is the address of the remote endpoint
+    for pointopoint interfaces and it may be followed by a slash and a decimal
+    number, encoding the network prefix length.
+
 **ifname=**__<interface>__:__<MAC>__::
-    Assign network device name <interface> (ie "bootnet") to the NIC with
+    Assign network device name <interface> (i.e. "bootnet") to the NIC with
     MAC <MAC>.
 +
 WARNING: Do **not** use the default kernel naming scheme for the interface name,
 as it can conflict with the kernel names. So, don't use "eth[0-9]+" for the
 interface name. Better name it "bootnet" or "bluesocket".
 
+**rd.route=**__<net>__/__<netmask>__:__<gateway>__[:__<interface>__]::
+    Add a static route with route options, which are separated by a colon.
+    IPv6 addresses have to be put in brackets.
++
+[listing]
+.Example
+--
+    rd.route=192.168.200.0/24:192.168.100.222:ens10
+    rd.route=192.168.200.0/24:192.168.100.222
+    rd.route=192.168.200.0/24::ens10
+    rd.route=[2001:DB8:3::/8]:[2001:DB8:2::1]:ens10
+--
+
 **bootdev=**__<interface>__::
     specify network interface to use routing and netroot information from.
     Required if multiple ip= lines are used.
@@ -493,6 +645,9 @@ interface name. Better name it "bootnet" or "bluesocket".
 **nameserver=**__<IP>__ [**nameserver=**__<IP>__ ...]::
     specify nameserver(s) to use
 
+**rd.peerdns=0**::
+    Disable DNS setting of DHCP parameters.
+
 **biosdevname=0**::
     boolean, turn off biosdevname network interface renaming
 
@@ -500,23 +655,28 @@ interface name. Better name it "bootnet" or "bluesocket".
     boolean, bring up network even without netroot set
 
 **vlan=**__<vlanname>__:__<phydevice>__::
-    Setup vlan device named <vlanname> on <phydeivce>.
+    Setup vlan device named <vlanname> on <phydevice>.
     We support the four styles of vlan names: VLAN_PLUS_VID (vlan0005),
     VLAN_PLUS_VID_NO_PAD (vlan5), DEV_PLUS_VID (eth0.0005),
     DEV_PLUS_VID_NO_PAD (eth0.5)
 
-**bond=**__<bondname>__[:__<bondslaves>__:[:__<options>__]]::
+**bond=**__<bondname>__[:__<bondslaves>__:[:__<options>__[:<mtu>]]]::
     Setup bonding device <bondname> on top of <bondslaves>.
     <bondslaves> is a comma-separated list of physical (ethernet) interfaces.
     <options> is a comma-separated list on bonding options (modinfo bonding for
     details) in format compatible with initscripts. If <options> includes
     multi-valued arp_ip_target option, then its values should be separated by
-    semicolon. Bond without parameters assumes
+    semicolon. if the mtu is specified, it will be set on the bond master.
+    Bond without parameters assumes
     bond=bond0:eth0,eth1:mode=balance-rr
 
-**team=**__<teammaster>__:__<teamslaves>__::
+**team=**__<teammaster>__:__<teamslaves>__[:__<teamrunner>__]::
     Setup team device <teammaster> on top of <teamslaves>.
     <teamslaves> is a comma-separated list of physical (ethernet) interfaces.
+    <teamrunner> is the runner type to be used (see *teamd.conf*(5)); defaults to
+    activebackup.
+    Team without parameters assumes
+    team=team0:eth0,eth1:activebackup
 
 **bridge=**__<bridgename>__:__<ethnames>__::
     Setup bridge <bridgename> with <ethnames>. <ethnames> is a comma-separated
@@ -527,9 +687,9 @@ NFS
 ~~~
 **root=**\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__]::
     mount nfs share from <server-ip>:/<root-dir>, if no server-ip is given, use
-    dhcp next_server. if server-ip is an IPv6 address it has to be put in
+    dhcp next_server. If server-ip is an IPv6 address it has to be put in
     brackets, e.g. [2001:DB8::1]. NFS options can be appended with the prefix
-    ":" or "," and are seperated by ",".
+    ":" or "," and are separated by ",".
 
 **root=**nfs:\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__], **root=**nfs4:\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__], **root=**__{dhcp|dhcp6}__::
     root=dhcp alone directs initrd to look at the DHCP root-path where NFS
@@ -548,7 +708,32 @@ NFS
     method. This is supported by dracut, but not recommended.
 
 **rd.nfs.domain=**__<NFSv4 domain name>__::
-    Set the NFSv4 domain name. Will overwrite the settings in _/etc/idmap.conf_.
+    Set the NFSv4 domain name. Will override the settings in _/etc/idmap.conf_.
+
+**rd.net.dhcp.retry=**__<cnt>__::
+    If this option is set, dracut will try to connect via dhcp <cnt> times before failing.
+    Default is 1.
+
+**rd.net.timeout.dhcp=**__<arg>__::
+    If this option is set, dhclient is called with "-timeout <arg>".
+
+**rd.net.timeout.iflink=**__<seconds>__::
+    Wait <seconds> until link shows up. Default is 60 seconds.
+
+**rd.net.timeout.ifup=**__<seconds>__::
+    Wait <seconds> until link has state "UP". Default is 20 seconds.
+
+**rd.net.timeout.route=**__<seconds>__::
+    Wait <seconds> until route shows up. Default is 20 seconds.
+
+**rd.net.timeout.ipv6dad=**__<seconds>__::
+    Wait <seconds> until IPv6 DAD is finished. Default is 50 seconds.
+
+**rd.net.timeout.ipv6auto=**__<seconds>__::
+    Wait <seconds> until IPv6 automatic addresses are assigned. Default is 40 seconds.
+
+**rd.net.timeout.carrier=**__<seconds>__::
+    Wait <seconds> until carrier is recognized. Default is 10 seconds.
 
 CIFS
 ~~~
@@ -637,6 +822,9 @@ You may want to use rd.iscsi.firmware.
 **root=**_???_ **netroot=**iscsi **rd.iscsi.firmware=1**::
  will read the iscsi parameter from the BIOS firmware
 
+**rd.iscsi.login_retry_max=**__<num>__::
+    maximum number of login retries
+
 **rd.iscsi.param=**__<param>__::
     <param> will be passed as "--param <param>" to iscsistart.
     This parameter can be specified multiple times.
@@ -654,24 +842,66 @@ will result in
 iscsistart -b --param node.session.timeo.replacement_timeout=30
 --
 
+**rd.iscsi.ibft** **rd.iscsi.ibft=1**:
+    Turn on iBFT autoconfiguration for the interfaces
+
+**rd.iscsi.mp** **rd.iscsi.mp=1**:
+    Configure all iBFT interfaces, not only used for booting (multipath)
+
+**rd.iscsi.waitnet=0**:
+    Turn off waiting for all interfaces to be up before trying to login to the iSCSI targets.
+
+**rd.iscsi.testroute=0**:
+    Turn off checking, if the route to the iSCSI target IP is possible before trying to login.
+
 FCoE
 ~~~~
-**fcoe=**__<edd|interface|MAC>__:__{dcb|nodcb}__::
+**rd.nofcoe=0**::
+    disable FCoE and lldpad
+
+**fcoe=**__<edd|interface|MAC>__:__{dcb|nodcb}__:__{fabric|vn2vn}__::
     Try to connect to a FCoE SAN through the NIC specified by _<interface>_ or
-    _<MAC>_ or EDD settings. For the second argument, currently only nodcb is
-    supported. This parameter can be specified multiple times.
+    _<MAC>_ or EDD settings. The second argument specifies if DCB
+    should be used. The optional third argument specifies whether
+    fabric or VN2VN mode should be used.
+    This parameter can be specified multiple times.
 +
 NOTE: letters in the MAC-address must be lowercase!
 
+NVMf
+~~~~
+**rd.nvmf.hostnqn=**__<hostNQN>__::
+    NVMe host NQN to use
+
+**rd.nvmf.hostid=**__<hostID>__::
+    NVMe host id to use
+
+**rd.nvmf.discover=**__{rdma|fc|tcp}__,__<traddr>__,[__<host_traddr>__],[__<trsvcid>__]::
+    Discover and connect to a NVMe-over-Fabric controller specified by
+    _<traddr>_ and the optionally _<host_traddr>_ or _<trsvcid>_.
+    The first argument specifies the transport to use; currently only
+    'rdma', 'fc', or 'tcp' are supported.
+    The _<traddr>_ parameter can be set to 'auto' to select
+    autodiscovery; in that case all other parameters are ignored.
+    This parameter can be specified multiple times.
+
 NBD
 ~~~
-**root=**??? **netroot=**nbd:__<server>__:__<port>__[:__<fstype>__[:__<mountopts>__[:__<nbdopts>__]]]::
-    mount nbd share from <server>
+**root=**??? **netroot=**nbd:__<server>__:__<port/exportname>__[:__<fstype>__[:__<mountopts>__[:__<nbdopts>__]]]::
+    mount nbd share from <server>.
++
+NOTE:
+    If "exportname" instead of "port" is given the standard port is used.
+    Newer versions of nbd are only supported with "exportname".
 
-**root=dhcp** with **dhcp** **root-path=**nbd:__<server>__:__<port>__[:__<fstype>__[:__<mountopts>__[:__<nbdopts>__]]]::
+**root=dhcp** with **dhcp** **root-path=**nbd:__<server>__:__<port/exportname>__[:__<fstype>__[:__<mountopts>__[:__<nbdopts>__]]]::
     root=dhcp alone directs initrd to look at the DHCP root-path where NBD
     options can be specified. This syntax is only usable in cases where you are
     directly mounting the volume as the rootfs.
++
+NOTE:
+    If "exportname" instead of "port" is given the standard port is used.
+    Newer versions of nbd are only supported with "exportname".
 
 DASD
 ~~~~
@@ -681,12 +911,19 @@ DASD
 ZFCP
 ~~~~
 **rd.zfcp=**__<zfcp adaptor device bus ID>__,__<WWPN>__,__<FCPLUN>__::
-    rd.zfcp can be specified multiple times on the kernel command line.
+    rd.zfcp can be specified multiple times on the kernel command
+    line.
+
+**rd.zfcp=**__<zfcp adaptor device bus ID>__::
+    If NPIV is enabled and the 'allow_lun_scan' parameter to the zfcp
+    module is set to 'Y' then the zfcp adaptor will be initiating a
+    scan internally and the <WWPN> and <FCPLUN> parameters can be omitted.
 +
 [listing]
 .Example
 --
 rd.zfcp=0.0.4000,0x5005076300C213e9,0x5022000000000000
+rd.zfcp=0.0.4000
 --
 
 **rd.zfcp.conf=0**::
@@ -695,7 +932,15 @@ rd.zfcp=0.0.4000,0x5005076300C213e9,0x5022000000000000
 ZNET
 ~~~~
 **rd.znet=**__<nettype>__,__<subchannels>__,__<options>__::
+    The whole parameter is appended to /etc/ccw.conf, which is used on
+    RHEL/Fedora with ccw_init, which is called from udev for certain
+    devices on z-series.
     rd.znet can be specified multiple times on the kernel command line.
+
+**rd.znet_ifname=**__<ifname>__:__<subchannels>__::
+    Assign network device name <interface> (i.e. "bootnet") to the NIC
+    corresponds to the subchannels. This is useful when dracut's default
+    "ifname=" doesn't work due to device having a changing MAC address.
 +
 [listing]
 .Example
@@ -704,10 +949,253 @@ rd.znet=qeth,0.0.0600,0.0.0601,0.0.0602,layer2=1,portname=foo
 rd.znet=ctc,0.0.0600,0.0.0601,protocol=bar
 --
 
+Booting live images
+~~~~~~~~~~~~~~~~~~~
+Dracut offers multiple options for live booted images:
+
+=====================
+SquashFS with read-only filesystem image::: The system will boot with a
+read-only filesystem from the SquashFS and apply a writable Device-mapper
+snapshot or an OverlayFS overlay mount for the read-only base filesystem.  This
+method ensures a relatively fast boot and lower RAM usage. Users **must be
+careful** to avoid writing too many blocks to a snapshot volume.  Once the
+blocks of the snapshot overlay are exhausted, the root filesystem becomes
+read-only and may cause application failures.  The snapshot overlay file is
+marked 'Overflow', and a difficult recovery is required to repair and enlarge
+the overlay offline.  Non-persistent overlays are sparse files in RAM that only
+consume content space as required blocks are allocated.  They default to an
+apparent size of 32 GiB in RAM.  The size can be adjusted with the
+**rd.live.overlay.size=** kernel command line option.
++
+The filesystem structure is traditionally expected to be:
++
+[listing]
+--
+squashfs.img          |  SquashFS from LiveCD .iso
+   !(mount)
+   /LiveOS
+       |- rootfs.img  |  Filesystem image to mount read-only
+            !(mount)
+            /bin      |  Live filesystem
+            /boot     |
+            /dev      |
+            ...       |
+--
++
+For OverlayFS mount overlays, the filesystem structure may also be a direct
+compression of the root filesystem:
++
+[listing]
+--
+squashfs.img          |  SquashFS from LiveCD .iso
+   !(mount)
+   /bin               |  Live filesystem
+   /boot              |
+   /dev               |
+   ...                |
+--
++
+Dracut uses one of the overlay methods of live booting by default.  No
+additional command line options are required other than **root=live:<URL>** to
+specify the location of your squashed filesystem.
++
+- The compressed SquashFS image can be copied during boot to RAM at
+`/run/initramfs/squashed.img` by using the **rd.live.ram=1** option.
+- A device with a persistent overlay can be booted read-only by using the
+**rd.live.overlay.readonly** option on the kernel command line.  This will
+either cause a temporary, writable overlay to be stacked over a read-only
+snapshot of the root filesystem or the OverlayFS mount will use an additional
+lower layer with the root filesystem.
++
+Uncompressed live filesystem image:::
+When the live system was installed with the '--skipcompress' option of the
+__livecd-iso-to-disk__ installation script for Live USB devices, the root
+filesystem image, __rootfs.img__, is expanded on installation and no SquashFS
+is involved during boot.
++
+- If **rd.live.ram=1** is used in this situation, the full, uncompressed
+root filesystem is copied during boot to `/run/initramfs/rootfs.img` in the
+`/run` tmpfs.
++
+- If **rd.live.overlay=none** is provided as a kernel command line option,
+a writable, linear Device-mapper target is created on boot with no overlay.
+
+Writable filesystem image:::
+The system will retrieve a compressed filesystem image, extract it to
+`/run/initramfs/fsimg/rootfs.img`, connect it to a loop device, create a
+writable, linear Device-mapper target at `/dev/mapper/live-rw`, and mount that
+as a writable volume at `/`.  More RAM is required during boot but the live
+filesystem is easier to manage if it becomes full.  Users can make a filesystem
+image of any size and that size will be maintained when the system boots. There
+is no persistence of root filesystem changes between boots with this option.
++
+The filesystem structure is expected to be:
++
+[listing]
+--
+rootfs.tgz            |  Compressed tarball containing filesystem image
+   !(unpack)
+   /rootfs.img        |  Filesystem image at /run/initramfs/fsimg/
+      !(mount)
+      /bin            |  Live filesystem
+      /boot           |
+      /dev            |
+      ...             |
+--
++
+To use this boot option, ensure that **rd.writable.fsimg=1** is in your kernel
+command line and add the **root=live:<URL>** to specify the location
+of your compressed filesystem image tarball or SquashFS image.
+=====================
+
+**rd.writable.fsimg=**1::
+Enables writable filesystem support.  The system will boot with a fully
+writable (but non-persistent) filesystem without snapshots __(see notes above
+about available live boot options)__.  You can use the **rootflags** option to
+set mount options for the live filesystem as well __(see documentation about
+rootflags in the **Standard** section above)__.
+This implies that the whole image is copied to RAM before the boot continues.
++
+NOTE: There must be enough free RAM available to hold the complete image.
++
+This method is very suitable for diskless boots.
+
+**root=**live:__<url>__::
+Boots a live image retrieved from __<url>__.  Requires the dracut 'livenet'
+module.  Valid handlers: __http, https, ftp, torrent, tftp__.
++
+[listing]
+.Examples
+--
+root=live:http://example.com/liveboot.img
+root=live:ftp://ftp.example.com/liveboot.img
+root=live:torrent://example.com/liveboot.img.torrent
+--
+
+**rd.live.debug=**1::
+Enables debug output from the live boot process.
+
+**rd.live.dir=**__<path>__::
+Specifies the directory within the boot device where the squashfs.img or
+rootfs.img can be found.  By default, this is `/LiveOS`.
+
+**rd.live.squashimg=**__<filename of SquashFS image>__::
+Specifies the filename for a SquashFS image of the root filesystem.
+By default, this is __squashfs.img__.
+
+**rd.live.ram=**1::
+Copy the complete image to RAM and use this for booting. This is useful
+when the image resides on, e.g., a DVD which needs to be ejected later on.
+
+**rd.live.overlay={**__<devspec>__[:__{<pathspec>|auto}__]|__none__}::
+Manage the usage of a permanent overlay.
++
+--
+* _<devspec>_ specifies the path to a device with a mountable filesystem.
+* _<pathspec>_ is the path to a file within that filesystem, which shall be
+used to persist the changes made to the device specified by the
+**root=live:__<url>__** option.
++
+The default _pathspec_, when _auto_ or no _:<pathspec>_ is given, is
+`/<+++<b>rd.live.dir</b>+++>/overlay-<label>-<uuid>`, where _<label>_ is the
+device LABEL, and _<uuid>_ is the device UUID.
+* _none_ (the word itself) specifies that no overlay will be used, such as when
+an uncompressed, writable live root filesystem is available.
++
+If a persistent overlay __is detected__ at the standard LiveOS path, the
+overlay & overlay type detected, whether Device-mapper or OverlayFS, will be
+used.
+--
++
+[listing]
+.Examples
+--
+rd.live.overlay=/dev/sdb1:persistent-overlay.img
+rd.live.overlay=UUID=99440c1f-8daa-41bf-b965-b7240a8996f4
+--
+
+**rd.live.overlay.size=**__<size_MiB>__::
+Specifies a non-persistent Device-mapper overlay size in MiB.  The default is
+_32768_.
+
+**rd.live.overlay.readonly=**1::
+This is used to boot with a normally read-write persistent overlay in a
+read-only mode.  With this option, either an additional, non-persistent,
+writable snapshot overlay will be stacked over a read-only snapshot,
+`/dev/mapper/live‑ro`, of the base filesystem with the persistent overlay, or a
+read-only loop device, in the case of a writable __rootfs.img__, or an OverlayFS
+mount will use the persistent overlay directory linked at `/run/overlayfs‑r` as
+an additional lower layer along with the base root filesystem and apply a
+transient, writable upper directory overlay, in order to complete the booted
+root filesystem.
+
+**rd.live.overlay.reset=**1::
+Specifies that a persistent overlay should be reset on boot.  All previous root
+filesystem changes are vacated by this action.
+
+**rd.live.overlay.thin=**1::
+Enables the usage of thin snapshots instead of classic dm snapshots.
+The advantage of thin snapshots is that they support discards, and will free
+blocks that are not claimed by the filesystem. In this use case, this means
+that memory is given back to the kernel when the filesystem does not claim it
+anymore.
+
+**rd.live.overlay.overlayfs=**1::
+Enables the use of the *OverlayFS* kernel module, if available, to provide a
+copy-on-write union directory for the root filesystem.  OverlayFS overlays are
+directories of the files that have changed on the read-only base (lower)
+filesystem.  The root filesystem is provided through a special overlay type
+mount that merges the lower and upper directories.  If an OverlayFS upper
+directory is not present on the boot device, a tmpfs directory will be created
+at `/run/overlayfs` to provide temporary storage.  Persistent storage can be
+provided on vfat or msdos formatted devices by supplying the OverlayFS upper
+directory within an embedded filesystem that supports the creation of trusted.*
+extended attributes and provides a valid d_type in readdir responses, such as
+with ext4 and xfs.  On non-vfat-formatted devices, a persistent OverlayFS
+overlay can extend the available root filesystem storage up to the capacity of
+the LiveOS disk device.
++
+If a persistent overlay is detected at the standard LiveOS path, the overlay &
+overlay type detected, whether OverlayFS or Device-mapper, will be used.
++
+The **rd.live.overlay.readonly** option, which allows a persistent overlayfs to
+be mounted read-only through a higher level transient overlay directory, has
+been implemented through the multiple lower layers feature of OverlayFS.
+
+
+ZIPL
+~~~~
+**rd.zipl=**__<path to blockdevice>__::
+    Update the dracut commandline with the values found in the
+    _dracut-cmdline.conf_ file on the given device.
+    The values are merged into the existing commandline values
+    and the udev events are regenerated.
++
+[listing]
+.Example
+--
+rd.zipl=UUID=0fb28157-99e3-4395-adef-da3f7d44835a
+--
+
+CIO_IGNORE
+~~~~~~~~~~
+**rd.cio_accept=**__<device-ids>__::
+    Remove the devices listed in <device-ids> from the default
+    cio_ignore kernel command-line settings.
+    <device-ids> is a list of comma-separated CCW device ids.
+    The default for this value is taken from the
+    _/boot/zipl/active_devices.txt_ file.
++
+[listing]
+.Example
+--
+rd.cio_accept=0.0.0180,0.0.0800,0.0.0801,0.0.0802
+--
+
 Plymouth Boot Splash
 ~~~~~~~~~~~~~~~~~~~~
 **plymouth.enable=0**::
-    disable the plymouth bootsplash completly.
+    disable the plymouth bootsplash completely.
 
 **rd.plymouth=0**::
     disable the plymouth bootsplash only for the initramfs.
@@ -757,7 +1245,8 @@ their new replacement.
 
 rdbreak:: rd.break
 
-rd_CCW:: rd.ccw
+rd.ccw:: rd.znet
+rd_CCW:: rd.znet
 
 rd_DASD_MOD:: rd.dasd
 
@@ -825,6 +1314,8 @@ rd_NO_MD:: rd.md=0
 
 rd_MD_UUID:: rd.md.uuid
 
+rd_NO_MULTIPATH: rd.multipath=0
+
 rd_NFS_DOMAIN:: rd.nfs.domain
 
 iscsi_initiator:: rd.iscsi.initiator

dracut.conf

@@ -1,51 +1,3 @@
-# PUT YOUR CONFIG HERE OR IN separate files named *.conf
-# in /etc/dracut.conf.d
-# SEE man dracut.conf(5)
-
-# Sample dracut config file
-
-#logfile=/var/log/dracut.log
-#fileloglvl=6
-
-# Exact list of dracut modules to use.  Modules not listed here are not going
-# to be included.  If you only want to add some optional modules use
-# add_dracutmodules option instead.
-#dracutmodules+=""
-
-# dracut modules to omit
-#omit_dracutmodules+=""
-
-# dracut modules to add to the default
-#add_dracutmodules+=""
-
-# additional kernel modules to the default
-#add_drivers+=""
-
-# list of kernel filesystem modules to be included in the generic initramfs
-#filesystems+=""
-
-# build initrd only to boot current hardware
-#hostonly="yes"
-#
-
-# install local /etc/mdadm.conf
-#mdadmconf="no"
-
-# install local /etc/lvm/lvm.conf
-#lvmconf="no"
-
-# A list of fsck tools to install. If it's not specified, module's hardcoded
-# default is used, currently: "umount mount /sbin/fsck* xfs_db xfs_check
-# xfs_repair e2fsck jfs_fsck reiserfsck btrfsck". The installation is
-# opportunistic, so non-existing tools are just ignored.
-#fscks=""
-
-# inhibit installation of any fsck tools
-#nofscks="yes"
-
-# mount / and /usr read-only by default
-#ro_mnt="no"
-
-# set the directory for temporary files
-# default: /var/tmp
-#tmpdir=/tmp
+# PUT YOUR CONFIG IN separate files
+# in /etc/dracut.conf.d named "<name>.conf"
+# SEE man dracut.conf(5) for options

dracut.conf.5.asc

@@ -3,6 +3,7 @@ DRACUT.CONF(5)
 :doctype: manpage
 :man source:   dracut
 :man manual:   dracut
+:man version:  {version}
 
 NAME
 ----
@@ -10,35 +11,40 @@ dracut.conf - configuration file(s) for dracut
 
 SYNOPSIS
 --------
-_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_
+_/etc/dracut.conf_
+_/etc/dracut.conf.d/\*.conf_
 _/usr/lib/dracut/dracut.conf.d/*.conf_
 
 Description
 -----------
 _dracut.conf_ is loaded during the initialisation phase of dracut. Command line
-parameter will overwrite any values set here.
+parameter will override any values set here.
 
 _*.conf_ files are read from /usr/lib/dracut/dracut.conf.d and
 /etc/dracut.conf.d. Files with the same name in /etc/dracut.conf.d will replace
 files in /usr/lib/dracut/dracut.conf.d.
-The files are then read in alphanumerical order and will overwrite parameters
+The files are then read in alphanumerical order and will override parameters
 set in _/etc/dracut.conf_. Each line specifies an attribute and a value. A '#'
 indicates the beginning of a comment; following characters, up to the end of the
 line are not interpreted.
 
-dracut command line options will overwrite any values set here.
+dracut command line options will override any values set here.
 
 Configuration files must have the extension .conf; other extensions are ignored.
 
+*add_dracutmodules+=*" __<dracut modules>__ "::
+    Add a space-separated list of dracut modules to call when building the
+    initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
+
 *dracutmodules+=*" __<dracut modules>__ "::
     Specify a space-separated list of dracut modules to call when building the
     initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
+    This option forces dracut to only include the specified dracut modules.
+    In most cases the "add_dracutmodules" option is what you want to use.
 
 *omit_dracutmodules+=*" __<dracut modules>__ "::
-    Omit a space-separated list of dracut modules.
-
-*add_dracutmodules+=*" __<dracut modules>__ "::
-    Add a space-separated list of dracut modules.
+    Omit a space-separated list of dracut modules to call when building the
+    initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
 
 *drivers+=*" __<kernel modules>__ "::
     Specify a space-separated list of kernel modules to exclusively include in
@@ -49,6 +55,10 @@ Configuration files must have the extension .conf; other extensions are ignored.
     Specify a space-separated list of kernel modules to add to the initramfs.
     The kernel modules have to be specified without the ".ko" suffix.
 
+*force_drivers+=*" __<list of kernel modules>__ "::
+    See add_drivers above. But in this case it is ensured that the drivers
+    are tried to be loaded early via modprobe.
+
 *omit_drivers+=*" __<kernel modules>__ "::
     Specify a space-separated list of kernel modules not to add to the
     initramfs. The kernel modules have to be specified without the ".ko" suffix.
@@ -66,16 +76,28 @@ Configuration files must have the extension .conf; other extensions are ignored.
 *install_items+=*" __<file>__[ __<file>__ ...] "::
     Specify additional files to include in the initramfs, separated by spaces.
 
+*install_optional_items+=*" __<file>__[ __<file>__ ...] "::
+    Specify additional files to include in the initramfs, separated by spaces,
+    if they exist.
+
+*compress=*"__{cat|bzip2|lzma|xz|gzip|lzo|lz4|zstd|<compressor [args ...]>}__"::
+    Compress the generated initramfs using the passed compression program. If
+    you pass it just the name of a compression program, it will call that
+    program with known-working arguments. If you pass arguments, it will be called
+    with exactly those arguments. Depending on what you pass, this may result in
+    an initramfs that the kernel cannot decompress.
+    To disable compression, use "cat".
+
 *do_strip=*"__{yes|no}__"::
     Strip binaries in the initramfs (default=yes)
 
-*do_prelink=*"__{yes|no}__"::
-    Prelink binaries in the initramfs (default=yes)
-
 *hostonly=*"__{yes|no}__"::
     Host-Only mode: Install only what is needed for booting the local host
     instead of a generic host and generate host-specific configuration.
 
+*hostonly_cmdline=*"__{yes|no}__"::
+    If set to "yes", store the kernel command line arguments needed in the initramfs
+
 *persistent_policy=*"__<policy>__"::
     Use _<policy>_ to address disks and partitions.
     _<policy>_ can be any directory name found in /dev/disk.
@@ -137,14 +159,14 @@ provide a valid _/etc/fstab_.
     archive. This cpio archive gets glued (concatenated, uncompressed one
     must be the first one) to the compressed cpio archive. The first,
     uncompressed cpio archive is for data which the kernel must be able
-    to access very early (and cannot make use of uncompress alogrithms yet)
+    to access very early (and cannot make use of uncompress algorithms yet)
     like microcode or ACPI tables (default=no).
 
 *acpi_table_dir=*"__<dir>__"::
     Directory to search for ACPI tables if acpi_override= is set to yes.
 
 *early_microcode=*"{yes|no}"::
-    Combine early microcode with ramdisk (default=no)
+    Combine early microcode with ramdisk (default=yes)
 
 *stdloglvl*="__\{0-6\}__"::
     Set logging to standard error level.
@@ -161,17 +183,40 @@ provide a valid _/etc/fstab_.
 *show_modules=*"__{yes|no}__"::
     Print the name of the included modules to standard output during build.
 
-*i18n_vars="__<variable mapping>__"::
+*i18n_vars=*"__<variable mapping>__"::
     Distribution specific variable mapping.
     See dracut/modules.d/10i18n/README for a detailed description.
 
 *i18n_default_font=*"__<fontname>__"::
     The font <fontname> to install, if not specified otherwise.
-    Default is "LatArCyrHeb-16".
+    Default is "eurlatgr".
 
 *i18n_install_all=*"__{yes|no}__"::
     Install everything regardless of generic or hostonly mode.
 
+*reproducible=*"__{yes|no}__"::
+    Create reproducible images.
+
+*loginstall=*"__<DIR>__"::
+    Log all files installed from the host to _<DIR>_.
+
+*uefi_stub=*"_<FILE>_"::
+    Specifies the UEFI stub loader, which will load the attached kernel, initramfs and
+    kernel command line and boots the kernel. The default is
+    _/lib/systemd/boot/efi/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+    or _/usr/lib/gummiboot/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+
+*uefi_splash_image=*"_<FILE>_"::
+    Specifies the UEFI stub loader's splash image. Requires bitmap (**.bmp**) image format.
+
+*uefi_secureboot_cert=*"_<FILE>_", *uefi_secureboot_key=*"_<FILE>_"::
+    Specifies a certificate and corresponding key, which are used to sign the created UEFI executable.
+    Requires both certificate and key need to be specified and _sbsign_ to be installed.
+
+*kernel_image=*"_<FILE>_"::
+    Specifies the kernel image, which to include in the UEFI executable. The default is
+    _/lib/modules/<KERNEL-VERSION>/vmlinuz_ or _/boot/vmlinuz-<KERNEL-VERSION>_
+
 Files
 -----
 _/etc/dracut.conf_::
@@ -179,7 +224,7 @@ _/etc/dracut.conf_::
     _/etc/dracut.conf.d/_.
 
 _/etc/dracut.conf.d/_::
-    Any _/etc/dracut.conf.d/*.conf_ file can overwrite the values in
+    Any _/etc/dracut.conf.d/*.conf_ file can override the values in
     _/etc/dracut.conf_. The configuration files are read in alphanumerical
     order.
 

dracut.conf.d/fedora.conf.example

@@ -2,14 +2,19 @@
 
 # i18n
 i18n_vars="/etc/sysconfig/keyboard:KEYTABLE-KEYMAP /etc/sysconfig/i18n:SYSFONT-FONT,FONTACM-FONT_MAP,FONT_UNIMAP"
-i18n_default_font="latarcyrheb-sun16"
+i18n_default_font="eurlatgr"
 i18n_install_all="yes"
+
+
 stdloglvl=3
 sysloglvl=5
-install_items+=" vi /etc/virc ps grep cat rm "
+install_optional_items+=" vi /etc/virc ps grep cat rm "
 prefix="/"
 systemdutildir=/usr/lib/systemd
 systemdsystemunitdir=/usr/lib/systemd/system
 systemdsystemconfdir=/etc/systemd/system
 udevdir=/usr/lib/udev
 hostonly="yes"
+hostonly_cmdline="no"
+early_microcode="yes"
+reproducible="yes"

dracut.conf.d/gentoo.conf.example

@@ -12,4 +12,4 @@ ro_mnt=yes
 i18n_vars="/etc/conf.d/keymaps:keymap-KEYMAP,extended_keymaps-EXT_KEYMAPS /etc/conf.d/consolefont:consolefont-FONT,consoletranslation-FONT_MAP /etc/rc.conf:unicode-UNICODE"
 i18n_default_font="LatArCyrHeb-16"
 
-omit_drivers+=" i2o_scsi"
+omit_drivers+=" i2o_scsi "

dracut.conf.d/suse.conf.example

@@ -1,3 +1,24 @@
-i18n_vars="/etc/sysconfig/language:RC_LANG-LANG,RC_LC_ALL-LC_ALL /etc/sysconfig/console:CONSOLE_UNICODEMAP-FONT_UNIMAP,CONSOLE_FONT-FONT,CONSOLE_SCREENMAP-FONT_MAP /etc/sysconfig/keyboard:KEYTABLE-KEYMAP"
-omit_drivers+=" i2o_scsi"
+# SUSE specific dracut settings
+#
+# SUSE by default always builds as small as possible initrd for performance
+# and resource reasons.
+# If you like to build a generic initrd which works on other platforms than
+# on the one dracut/mkinitrd got called comment out below setting(s).
+hostonly="yes"
+hostonly_cmdline="yes"
 
+compress="xz -0 --check=crc32 --memlimit-compress=50%"
+
+i18n_vars="/etc/sysconfig/language:RC_LANG-LANG,RC_LC_ALL-LC_ALL /etc/sysconfig/console:CONSOLE_UNICODEMAP-FONT_UNIMAP,CONSOLE_FONT-FONT,CONSOLE_SCREENMAP-FONT_MAP /etc/sysconfig/keyboard:KEYTABLE-KEYMAP"
+omit_drivers+=" i2o_scsi "
+
+# Below adds additional tools to the initrd which are not urgently necessary to
+# bring up the system, but help to debug problems.
+# See /usr/lib/dracut/modules.d/95debug/module-setup.sh which additional tools
+# are installed and add more if you need them. This specifically helps if you
+# use:
+# rd.break=[cmdline|pre-udev|pre-trigger|initqueue|pre-mount|
+# mount|pre-pivot|cleanup]
+# boot parameter or if you are forced to enter the dracut emergency shell.
+
+# add_dracutmodules+=debug

dracut.modules.7.asc

@@ -3,6 +3,7 @@ DRACUT.MODULES(7)
 :doctype: manpage
 :man source:   dracut
 :man manual:   dracut
+:man version:  {version}
 
 NAME
 ----
@@ -19,7 +20,7 @@ you can replace init with your own version of _99base_, this is not encouraged.
 Instead you should use, if possible, the hooks of dracut. All hooks, and the
 point of time in which they are executed, are described in <<stages>>.
 
-The main script, which creates the initramfs is dracut itsself. It parses all
+The main script, which creates the initramfs is dracut itself. It parses all
 arguments and sets up the directory, in which everything is installed. It then
 executes all check, install, installkernel scripts found in the modules, which
 are to be processed. After everything is installed, the install directory is
@@ -92,18 +93,23 @@ udev state.
 
 ==== Initqueue settled
 
-This hooks (initqueue/settled) gets executed every time udev has settled.
+This hook (initqueue/settled) gets executed every time udev has settled.
 
 ==== Initqueue timeout
 
-This hooks (initqueue/timeout) gets executed, when the main loop counter becomes
+This hook (initqueue/timeout) gets executed, when the main loop counter becomes
 half of the rd.retry counter.
 
+==== Initqueue online
+
+This hook (initqueue/online) gets executed whenever a network interface comes online
+(that is, once it is up and configured by the configured network module).
+
 ==== Initqueue finished
 
 This hook (initqueue/finished) is called after udev has settled and
 if all scripts herein return 0 the main loop will be ended.
-Abritary scripts can be added here, to loop in the
+Arbitrary scripts can be added here, to loop in the
 initqueue until something happens, which a dracut module wants to wait for.
 
 === Hook: pre-mount
@@ -145,8 +151,8 @@ FIXME
 
 == Writing a Module
 
-A simple example module is _96insmodpost_, which modprobes a kernel module after
-udev has settled and the basic device drivers have been loaded.
+A simple example module is _90kernel-modules_, which modprobes a kernel module
+after udev has settled and the basic device drivers have been loaded.
 
 All module installation information is in the file module-setup.sh.
 
@@ -158,7 +164,7 @@ check():
 return 0
 ----
 
-The we create the install() function, which installs a cmdline hook with
+Then we create the install() function, which installs a cmdline hook with
 priority number 20 called _parse-insmodpost.sh_. It also installs the
 _insmodpost.sh_ script in _/sbin_.
 
@@ -168,7 +174,7 @@ inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
 inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
 ----
 
-The _pase-instmodpost.sh_ parses the kernel command line for a argument
+The _parse-instmodpost.sh_ parses the kernel command line for a argument
 rd.driver.post, blacklists the module from being autoloaded and installs the
 hook _insmodpost.sh_ in the _initqueue/settled_.
 
@@ -212,7 +218,7 @@ check() should return with:
 
 0:: Include the dracut module in the initramfs.
 
-1:: Do not include the dracut module. The requirements are not fullfilled
+1:: Do not include the dracut module. The requirements are not fulfilled
 (missing tools, etc.)
 
 255:: Only include the dracut module, if another module requires it or if
@@ -255,7 +261,9 @@ not lead to an error.
 ==== inst <src> [<dst>]
 
 installs _one_ file <src> either to the same place in the initramfs or to an
-optional <dst>.
+optional <dst>. inst with more than two arguments is treated the same as
+inst_multiple, all arguments are treated as files to install and none as
+install destinations.
 
 ==== inst_hook <hookdir> <prio> <src>
 
@@ -264,7 +272,7 @@ installs an executable/script <src> in the dracut hook <hookdir> with priority
 
 ==== inst_rules <udevrule> [ <udevrule> ...]
 
-installs one ore more udev rules. Non-existant udev rules are reported, but do
+installs one or more udev rules. Non-existant udev rules are reported, but do
 not let dracut fail.
 
 ==== instmods <kernelmodule> [ <kernelmodule> ... ]

dracut.spec

@@ -1,17 +1,15 @@
 %define dracutlibdir %{_prefix}/lib/dracut
 %bcond_without doc
 
-# Variables must be defined
-%define with_nbd                1
-
-# nbd in Fedora only
-%if 0%{?rhel} >= 6
-%define with_nbd 0
-%endif
+# We ship a .pc file but don't want to have a dep on pkg-config. We
+# strip the automatically generated dep here and instead co-own the
+# directory.
+%global __requires_exclude pkg-config
+%define dist_free_release xxx
 
 Name: dracut
 Version: xxx
-Release: xxx
+Release: %{dist_free_release}%{?dist}
 
 Summary: Initramfs generator using udev
 %if 0%{?fedora} || 0%{?rhel}
@@ -28,22 +26,21 @@ License: GPLv2+ and LGPLv2+
 URL: https://dracut.wiki.kernel.org/
 
 # Source can be generated by
-# http://git.kernel.org/?p=boot/dracut/dracut.git;a=snapshot;h=%{version};sf=tgz
+# http://git.kernel.org/?p=boot/dracut/dracut.git;a=snapshot;h=%%{version};sf=tgz
 Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.xz
+Source1: https://www.gnu.org/licenses/lgpl-2.1.txt
 
-BuildRequires: bash git
+BuildRequires: bash
+BuildRequires: git
+BuildRequires: pkgconfig(libkmod) >= 23
+BuildRequires: gcc
 
 %if 0%{?fedora} || 0%{?rhel}
-BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
 BuildRequires: pkgconfig
+BuildRequires: systemd
 %endif
 %if 0%{?fedora}
 BuildRequires: bash-completion
-BuildRequires: pkgconfig
-%endif
-
-%if 0%{?suse_version}
-BuildRoot: %{_tmppath}/%{name}-%{version}-build
 %endif
 
 %if %{with doc}
@@ -52,37 +49,21 @@ BuildRequires: docbook-style-xsl docbook-dtds libxslt
 %endif
 
 %if 0%{?suse_version}
--BuildRequires: docbook-xsl-stylesheets libxslt
+BuildRequires: docbook-xsl-stylesheets libxslt
 %endif
 
 BuildRequires: asciidoc
 %endif
 
-
-%if 0%{?fedora} > 12 || 0%{?rhel}
-# no "provides", because dracut does not offer
-# all functionality of the obsoleted packages
-Obsoletes: mkinitrd <= 6.0.93
-Obsoletes: mkinitrd-devel <= 6.0.93
-Obsoletes: nash <= 6.0.93
-Obsoletes: libbdevid-python <= 6.0.93
-%endif
-
-%if 0%{?fedora} > 16 || 0%{?rhel} > 6
-BuildRequires: systemd-units
-%endif
-
 %if 0%{?suse_version} > 9999
 Obsoletes: mkinitrd < 2.6.1
 Provides: mkinitrd = 2.6.1
 %endif
 
-Obsoletes: dracut-kernel < 005
-Provides:  dracut-kernel = %{version}-%{release}
-
-Obsoletes: dracut <= 029
-Obsoletes: dracut-norescue
-Provides:  dracut-norescue
+Obsoletes: dracut-fips <= 047
+Provides:  dracut-fips = %{version}-%{release}
+Obsoletes: dracut-fips-aesni <= 047
+Provides:  dracut-fips-aesni = %{version}-%{release}
 
 Requires: bash >= 4
 Requires: coreutils
@@ -90,40 +71,55 @@ Requires: cpio
 Requires: filesystem >= 2.1.0
 Requires: findutils
 Requires: grep
-Requires: hardlink
-Requires: gzip xz
 Requires: kmod
 Requires: sed
-Requires: kpartx
+Requires: xz
+Requires: gzip
 
-%if 0%{?fedora} || 0%{?rhel} > 6
+%if 0%{?fedora} || 0%{?rhel}
+Recommends: memstrack
+Recommends: hardlink
+Recommends: pigz
+Recommends: kpartx
 Requires: util-linux >= 2.21
-Requires: systemd >= 199
+Requires: systemd >= 219
+Requires: systemd-udev >= 219
 Requires: procps-ng
-Conflicts: grubby < 8.23
-Conflicts: initscripts < 8.63-1
-Conflicts: plymouth < 0.8.0-0.2009.29.09.19.1
-Conflicts: bcache-tools < 0-0.14.20130909git
 %else
+Requires: hardlink
+Requires: gzip
+Requires: kpartx
 Requires: udev > 166
 Requires: util-linux-ng >= 2.21
 %endif
 
-Conflicts: mdadm < 3.2.6-14
+%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
+Requires: libkcapi-hmaccalc
+%endif
 
 %description
-dracut contains tools to create a bootable initramfs for 2.6 Linux kernels.
-Unlike existing implementations, dracut does hard-code as little as possible
-into the initramfs. dracut contains various modules which are driven by the
-event-based udev. Having root on MD, DM, LVM2, LUKS is supported as well as
-NFS, iSCSI, NBD, FCoE with the dracut-network package.
+dracut contains tools to create bootable initramfses for the Linux
+kernel. Unlike other implementations, dracut hard-codes as little
+as possible into the initramfs. dracut contains various modules which
+are driven by the event-based udev. Having root on MD, DM, LVM2, LUKS
+is supported as well as NFS, iSCSI, NBD, FCoE with the dracut-network
+package.
 
 %package network
 Summary: dracut modules to build a dracut initramfs with network support
+%if 0%{?_module_build}
+# In the module-build-service, we have pieces of dracut provided by different
+# modules ("base-runtime" provides most functionality, but we need
+# dracut-network in "installer". Since these two modules build with separate
+# dist-tags, we need to reduce this strict requirement to ignore the dist-tag.
+Requires: %{name} >= %{version}-%{dist_free_release}
+%else
 Requires: %{name} = %{version}-%{release}
+%endif
 Requires: iputils
 Requires: iproute
-Requires: dhclient
+Requires: (NetworkManager >= 1.20 or dhclient)
+Suggests: NetworkManager
 Obsoletes: dracut-generic < 008
 Provides:  dracut-generic = %{version}-%{release}
 
@@ -131,32 +127,6 @@ Provides:  dracut-generic = %{version}-%{release}
 This package requires everything which is needed to build a generic
 all purpose initramfs with network support with dracut.
 
-%if 0%{?fedora} || 0%{?rhel} >= 6 || 0%{?suse_version}
-%package fips
-Summary: dracut modules to build a dracut initramfs with an integrity check
-Requires: %{name} = %{version}-%{release}
-Requires: hmaccalc
-%if 0%{?rhel} > 5
-# For Alpha 3, we want nss instead of nss-softokn
-Requires: nss
-%else
-Requires: nss-softokn
-%endif
-Requires: nss-softokn-freebl
-
-%description fips
-This package requires everything which is needed to build an
-initramfs with dracut, which does an integrity check.
-%endif
-
-%package fips-aesni
-Summary: dracut modules to build a dracut initramfs with an integrity check with aesni-intel
-Requires: %{name}-fips = %{version}-%{release}
-
-%description fips-aesni
-This package requires everything which is needed to build an
-initramfs with dracut, which does an integrity check and adds the aesni-intel kernel module.
-
 %package caps
 Summary: dracut modules to build a dracut initramfs which drops capabilities
 Requires: %{name} = %{version}-%{release}
@@ -166,11 +136,29 @@ Requires: libcap
 This package requires everything which is needed to build an
 initramfs with dracut, which drops capabilities.
 
+%package live
+Summary: dracut modules to build a dracut initramfs with live image capabilities
+%if 0%{?_module_build}
+# See the network subpackage comment.
+Requires: %{name} >= %{version}-%{dist_free_release}
+%else
+Requires: %{name} = %{version}-%{release}
+%endif
+Requires: %{name}-network = %{version}-%{release}
+Requires: tar gzip coreutils bash device-mapper curl
+%if 0%{?fedora}
+Requires: fuse ntfs-3g
+%endif
+
+%description live
+This package requires everything which is needed to build an
+initramfs with dracut, with live image capabilities, like Live CDs.
+
 %package config-generic
 Summary: dracut configuration to turn off hostonly image generation
 Requires: %{name} = %{version}-%{release}
-Obsoletes: dracut-nohostonly
-Provides:  dracut-nohostonly
+Obsoletes: dracut-nohostonly < 030
+Provides:  dracut-nohostonly = %{version}-%{release}
 
 %description config-generic
 This package provides the configuration to turn off the host specific initramfs
@@ -179,7 +167,7 @@ generation with dracut and generates a generic image by default.
 %package config-rescue
 Summary: dracut configuration to turn on rescue image generation
 Requires: %{name} = %{version}-%{release}
-Obsoletes: dracut <= 029
+Obsoletes: dracut < 030
 
 %description config-rescue
 This package provides the configuration to turn on the rescue initramfs
@@ -192,41 +180,39 @@ Requires: %{name} = %{version}-%{release}
 %description tools
 This package contains tools to assemble the local initrd and host configuration.
 
+%package squash
+Summary: dracut module to build an initramfs with most files in a squashfs image
+Requires: %{name} = %{version}-%{release}
+Requires: squashfs-tools
+
+%description squash
+This package provides a dracut module to build an initramfs, but store most files
+in a squashfs image, result in a smaller initramfs size and reduce runtime memory
+usage.
+
 %prep
-%setup -q -n %{name}-%{version}
-
-%if %{defined PATCH1}
-git init
-git config user.email "dracut-maint@redhat.com"
-git config user.name "Fedora dracut team"
-git add .
-git commit -a -q -m "%{version} baseline."
-
-# Apply all the patches.
-git am -p1 %{patches}
-%endif
+%autosetup -n %{name}-%{version} -S git_am
+cp %{SOURCE1} .
 
 %build
-%configure --systemdsystemunitdir=%{_unitdir} --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) --libdir=%{_prefix}/lib \
+%configure  --systemdsystemunitdir=%{_unitdir} \
+            --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) \
+            --libdir=%{_prefix}/lib \
 %if %{without doc}
-     --disable-documentation
+            --disable-documentation \
 %endif
+            ${NULL}
 
-make %{?_smp_mflags}
+%make_build
 
 %install
-%if 0%{?fedora} || 0%{?rhel}
-rm -rf -- $RPM_BUILD_ROOT
-%endif
-make %{?_smp_mflags} install \
-     DESTDIR=$RPM_BUILD_ROOT \
+%make_install %{?_smp_mflags} \
      libdir=%{_prefix}/lib
 
 echo "DRACUT_VERSION=%{version}-%{release}" > $RPM_BUILD_ROOT/%{dracutlibdir}/dracut-version.sh
 
 %if 0%{?fedora} == 0 && 0%{?rhel} == 0 && 0%{?suse_version} == 0
 rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/01fips
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/02fips-aesni
 %endif
 
 %if %{defined _unitdir}
@@ -237,6 +223,9 @@ rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00bootchart
 # we do not support dash in the initramfs
 rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00dash
 
+# we do not support mksh in the initramfs
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00mksh
+
 # remove gentoo specific modules
 rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/50gensplash
 
@@ -247,6 +236,23 @@ rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/97masterkey
 rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/98integrity
 %endif
 
+%ifnarch s390 s390x
+# remove architecture specific modules
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/80cms
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/81cio_ignore
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/91zipl
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95dasd
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95dasd_mod
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95dasd_rules
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95dcssblk
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95qeth_rules
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95zfcp
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95zfcp_rules
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95znet
+%else
+rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00warpclock
+%endif
+
 mkdir -p $RPM_BUILD_ROOT/boot/dracut
 mkdir -p $RPM_BUILD_ROOT/var/lib/dracut/overlay
 mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/log
@@ -255,58 +261,40 @@ mkdir -p $RPM_BUILD_ROOT%{_sharedstatedir}/initramfs
 
 %if 0%{?fedora} || 0%{?rhel}
 install -m 0644 dracut.conf.d/fedora.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
-rm -f $RPM_BUILD_ROOT%{_mandir}/man?/*suse*
 %endif
 %if 0%{?suse_version}
 install -m 0644 dracut.conf.d/suse.conf.example   $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
+%else
+rm -f $RPM_BUILD_ROOT%{_mandir}/man?/*suse*
 %endif
 
-%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
-install -m 0644 dracut.conf.d/fips.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/40-fips.conf
-%endif
-
-%if 0%{?fedora} <= 12 && 0%{?rhel} < 6 && 0%{?suse_version} <= 9999
+%if 0%{?fedora} == 0 && 0%{?rhel} == 0 && 0%{?suse_version} <= 9999
 rm -f -- $RPM_BUILD_ROOT%{_bindir}/mkinitrd
 rm -f -- $RPM_BUILD_ROOT%{_bindir}/lsinitrd
+rm -f -- $RPM_BUILD_ROOT%{_mandir}/man8/mkinitrd.8*
+rm -f -- $RPM_BUILD_ROOT%{_mandir}/man1/lsinitrd.1*
 %endif
 
-%if 0%{?fedora} || 0%{?rhel} > 6
-# FIXME: remove after F19
-mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/kernel/postinst.d
-install -m 0755 51-dracut-rescue-postinst.sh $RPM_BUILD_ROOT%{_sysconfdir}/kernel/postinst.d/51-dracut-rescue-postinst.sh
-
 echo 'hostonly="no"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-generic-image.conf
 echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-rescue.conf
-%endif
-
-%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
-> $RPM_BUILD_ROOT/etc/system-fips
-%endif
-
-# create compat symlink
-mkdir -p $RPM_BUILD_ROOT%{_sbindir}
-ln -sr $RPM_BUILD_ROOT%{_bindir}/dracut $RPM_BUILD_ROOT%{_sbindir}/dracut
-
-%clean
-rm -rf -- $RPM_BUILD_ROOT
 
 %files
-%defattr(-,root,root,0755)
 %if %{with doc}
-%doc README HACKING TODO COPYING AUTHORS NEWS dracut.html dracut.png dracut.svg
+%doc README.md HACKING TODO AUTHORS NEWS dracut.html dracut.png dracut.svg
 %endif
+%{!?_licensedir:%global license %%doc}
+%license COPYING lgpl-2.1.txt
 %{_bindir}/dracut
-# compat symlink
-%{_sbindir}/dracut
 %{_datadir}/bash-completion/completions/dracut
 %{_datadir}/bash-completion/completions/lsinitrd
-%if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
+%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version} > 9999
 %{_bindir}/mkinitrd
 %{_bindir}/lsinitrd
 %endif
 %dir %{dracutlibdir}
 %dir %{dracutlibdir}/modules.d
 %{dracutlibdir}/dracut-functions.sh
+%{dracutlibdir}/dracut-init.sh
 %{dracutlibdir}/dracut-functions
 %{dracutlibdir}/dracut-version.sh
 %{dracutlibdir}/dracut-logger.sh
@@ -319,14 +307,19 @@ rm -rf -- $RPM_BUILD_ROOT
 %endif
 %dir %{_sysconfdir}/dracut.conf.d
 %dir %{dracutlibdir}/dracut.conf.d
+%dir %{_datadir}/pkgconfig
+%{_datadir}/pkgconfig/dracut.pc
 
 %if %{with doc}
 %{_mandir}/man8/dracut.8*
 %{_mandir}/man8/*service.8*
-%if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
+%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version} > 9999
 %{_mandir}/man8/mkinitrd.8*
 %{_mandir}/man1/lsinitrd.1*
 %endif
+%if 0%{?suse_version}
+%{_mandir}/man8/mkinitrd-suse.8*
+%endif
 %{_mandir}/man7/dracut.kernel.7*
 %{_mandir}/man7/dracut.cmdline.7*
 %{_mandir}/man7/dracut.modules.7*
@@ -334,67 +327,87 @@ rm -rf -- $RPM_BUILD_ROOT
 %{_mandir}/man5/dracut.conf.5*
 %endif
 
-%if %{defined _unitdir}
-%{dracutlibdir}/modules.d/00systemd-bootchart
-%else
+%if %{undefined _unitdir}
 %{dracutlibdir}/modules.d/00bootchart
 %endif
 %{dracutlibdir}/modules.d/00bash
+%{dracutlibdir}/modules.d/00systemd
+%ifnarch s390 s390x
+%{dracutlibdir}/modules.d/00warpclock
+%endif
+%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
+%{dracutlibdir}/modules.d/01fips
+%endif
+%{dracutlibdir}/modules.d/01systemd-initrd
 %{dracutlibdir}/modules.d/03modsign
 %{dracutlibdir}/modules.d/03rescue
 %{dracutlibdir}/modules.d/04watchdog
+%{dracutlibdir}/modules.d/04watchdog-modules
 %{dracutlibdir}/modules.d/05busybox
+%{dracutlibdir}/modules.d/06dbus
+%{dracutlibdir}/modules.d/06rngd
 %{dracutlibdir}/modules.d/10i18n
 %{dracutlibdir}/modules.d/30convertfs
 %{dracutlibdir}/modules.d/45url-lib
 %{dracutlibdir}/modules.d/50drm
 %{dracutlibdir}/modules.d/50plymouth
-%{dracutlibdir}/modules.d/80cms
+%{dracutlibdir}/modules.d/80lvmmerge
 %{dracutlibdir}/modules.d/90btrfs
 %{dracutlibdir}/modules.d/90crypt
 %{dracutlibdir}/modules.d/90dm
 %{dracutlibdir}/modules.d/90dmraid
-%{dracutlibdir}/modules.d/90dmsquash-live
 %{dracutlibdir}/modules.d/90kernel-modules
+%{dracutlibdir}/modules.d/90kernel-modules-extra
 %{dracutlibdir}/modules.d/90lvm
 %{dracutlibdir}/modules.d/90mdraid
 %{dracutlibdir}/modules.d/90multipath
+%{dracutlibdir}/modules.d/90nvdimm
+%{dracutlibdir}/modules.d/90ppcmac
 %{dracutlibdir}/modules.d/90qemu
 %{dracutlibdir}/modules.d/91crypt-gpg
 %{dracutlibdir}/modules.d/91crypt-loop
 %{dracutlibdir}/modules.d/95debug
+%{dracutlibdir}/modules.d/95fstab-sys
+%{dracutlibdir}/modules.d/95lunmask
+%{dracutlibdir}/modules.d/95nvmf
 %{dracutlibdir}/modules.d/95resume
 %{dracutlibdir}/modules.d/95rootfs-block
-%{dracutlibdir}/modules.d/95dasd
-%{dracutlibdir}/modules.d/95dasd_mod
-%{dracutlibdir}/modules.d/95dasd_rules
-%{dracutlibdir}/modules.d/95fstab-sys
-%{dracutlibdir}/modules.d/95zfcp
-%{dracutlibdir}/modules.d/95zfcp_rules
 %{dracutlibdir}/modules.d/95terminfo
 %{dracutlibdir}/modules.d/95udev-rules
 %{dracutlibdir}/modules.d/95virtfs
+%ifarch s390 s390x
+%{dracutlibdir}/modules.d/80cms
+%{dracutlibdir}/modules.d/81cio_ignore
+%{dracutlibdir}/modules.d/91zipl
+%{dracutlibdir}/modules.d/95dasd
+%{dracutlibdir}/modules.d/95dasd_mod
+%{dracutlibdir}/modules.d/95dasd_rules
+%{dracutlibdir}/modules.d/95dcssblk
+%{dracutlibdir}/modules.d/95qeth_rules
+%{dracutlibdir}/modules.d/95zfcp
+%{dracutlibdir}/modules.d/95zfcp_rules
+%endif
 %if %{undefined _unitdir}
 %{dracutlibdir}/modules.d/96securityfs
 %{dracutlibdir}/modules.d/97masterkey
 %{dracutlibdir}/modules.d/98integrity
 %endif
 %{dracutlibdir}/modules.d/97biosdevname
+%{dracutlibdir}/modules.d/98dracut-systemd
 %{dracutlibdir}/modules.d/98ecryptfs
 %{dracutlibdir}/modules.d/98pollcdrom
 %{dracutlibdir}/modules.d/98selinux
 %{dracutlibdir}/modules.d/98syslog
-%{dracutlibdir}/modules.d/98systemd
 %{dracutlibdir}/modules.d/98usrmount
 %{dracutlibdir}/modules.d/99base
+%{dracutlibdir}/modules.d/99memstrack
 %{dracutlibdir}/modules.d/99fs-lib
-%{dracutlibdir}/modules.d/99img-lib
 %{dracutlibdir}/modules.d/99shutdown
 %attr(0644,root,root) %ghost %config(missingok,noreplace) %{_localstatedir}/log/dracut.log
 %dir %{_sharedstatedir}/initramfs
 %if %{defined _unitdir}
 %{_unitdir}/dracut-shutdown.service
-%{_unitdir}/shutdown.target.wants/dracut-shutdown.service
+%{_unitdir}/sysinit.target.wants/dracut-shutdown.service
 %{_unitdir}/dracut-cmdline.service
 %{_unitdir}/dracut-initqueue.service
 %{_unitdir}/dracut-mount.service
@@ -409,52 +422,40 @@ rm -rf -- $RPM_BUILD_ROOT
 %{_unitdir}/initrd.target.wants/dracut-pre-pivot.service
 %{_unitdir}/initrd.target.wants/dracut-pre-trigger.service
 %{_unitdir}/initrd.target.wants/dracut-pre-udev.service
-
 %endif
-%if 0%{?fedora} || 0%{?rhel} > 6
 %{_prefix}/lib/kernel/install.d/50-dracut.install
-%endif
 
 %files network
-%defattr(-,root,root,0755)
+%{dracutlibdir}/modules.d/02systemd-networkd
+%{dracutlibdir}/modules.d/35network-manager
+%{dracutlibdir}/modules.d/35network-legacy
+%{dracutlibdir}/modules.d/35network-wicked
 %{dracutlibdir}/modules.d/40network
-%{dracutlibdir}/modules.d/95fcoe
-%{dracutlibdir}/modules.d/95iscsi
-%{dracutlibdir}/modules.d/90livenet
+%{dracutlibdir}/modules.d/45ifcfg
+%{dracutlibdir}/modules.d/90kernel-network-modules
 %{dracutlibdir}/modules.d/90qemu-net
 %{dracutlibdir}/modules.d/95cifs
+%{dracutlibdir}/modules.d/95fcoe
+%{dracutlibdir}/modules.d/95fcoe-uefi
+%{dracutlibdir}/modules.d/95iscsi
 %{dracutlibdir}/modules.d/95nbd
 %{dracutlibdir}/modules.d/95nfs
 %{dracutlibdir}/modules.d/95ssh-client
-%{dracutlibdir}/modules.d/45ifcfg
+%ifarch s390 s390x
 %{dracutlibdir}/modules.d/95znet
-%{dracutlibdir}/modules.d/95fcoe-uefi
+%endif
 %{dracutlibdir}/modules.d/99uefi-lib
 
-%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
-%files fips
-%defattr(-,root,root,0755)
-%{dracutlibdir}/modules.d/01fips
-%{dracutlibdir}/dracut.conf.d/40-fips.conf
-%config(missingok) /etc/system-fips
-%endif
-
-%files fips-aesni
-%defattr(-,root,root,0755)
-
-%if %{with doc}
-%doc COPYING
-%endif
-
-%{dracutlibdir}/modules.d/02fips-aesni
-
 %files caps
-%defattr(-,root,root,0755)
 %{dracutlibdir}/modules.d/02caps
 
-%files tools
-%defattr(-,root,root,0755)
+%files live
+%{dracutlibdir}/modules.d/99img-lib
+%{dracutlibdir}/modules.d/90dmsquash-live
+%{dracutlibdir}/modules.d/90dmsquash-live-ntfs
+%{dracutlibdir}/modules.d/90livenet
 
+%files tools
 %if %{with doc}
 %doc %{_mandir}/man8/dracut-catimages.8*
 %endif
@@ -464,16 +465,14 @@ rm -rf -- $RPM_BUILD_ROOT
 %dir /var/lib/dracut
 %dir /var/lib/dracut/overlay
 
+%files squash
+%{dracutlibdir}/modules.d/99squash
+
 %files config-generic
-%defattr(-,root,root,0755)
 %{dracutlibdir}/dracut.conf.d/02-generic-image.conf
 
 %files config-rescue
-%defattr(-,root,root,0755)
 %{dracutlibdir}/dracut.conf.d/02-rescue.conf
-%if 0%{?fedora} || 0%{?rhel} > 6
 %{_prefix}/lib/kernel/install.d/51-dracut-rescue.install
-%{_sysconfdir}/kernel/postinst.d/51-dracut-rescue-postinst.sh
-%endif
 
 %changelog

dracut.usage.asc

@@ -83,7 +83,7 @@ on the command line:
 === Adding Kernel Modules
 If you need a special kernel module in the initramfs, which is not
 automatically picked up by dracut, you have the use the --add-drivers option
-on the command line or  the drivers vaiable in  the _/etc/dracut.conf_
+on the command line or  the drivers variable in  the _/etc/dracut.conf_
 or _/etc/dracut.conf.d/myconf.conf_ configuration file (see *dracut.conf*(5)):
 ----
 # dracut --add-drivers mymod initramfs-with-mymod.img
@@ -94,15 +94,11 @@ An initramfs generated without the "hostonly" mode, does not contain any system
 configuration files (except for some special exceptions), so the configuration
 has to be done on the kernel command line. With this flexibility, you can easily
 boot from a changed root partition, without the need to recompile the initramfs
-image. So, you could completly change your root partition (move it inside a md
+image. So, you could completely change your root partition (move it inside a md
 raid with encryption and LVM on top), as long as you specify the correct
 filesystem LABEL or UUID on the kernel command line for your root device, dracut
 will find it and boot from it.
 
-The kernel command line usually can be configured in _/boot/grub/grub.conf_, if
-grub is your bootloader and it also can be edited in the real boot process in
-the grub menu.
-
 The kernel command line can also be provided by the dhcp server with the
 root-path option. See <<NetworkBoot>>.
 
@@ -155,9 +151,9 @@ If your root partition is on the network see <<NetworkBoot>>.
 If you have to input passwords for encrypted disk volumes, you might want to set
 the keyboard layout and specify a display font.
 
-A typical german kernel command would contain:
+A typical german kernel command line would contain:
 ----
-rd.vconsole.font=latarcyrheb-sun16 rd.vconsole.keymap=de-latin1-nodeadkeys rd.locale.LANG=de_DE.UTF-8
+rd.vconsole.font=eurlatgr rd.vconsole.keymap=de-latin1-nodeadkeys rd.locale.LANG=de_DE.UTF-8
 ----
 
 Setting these options can override the setting stored on your system, if you use
@@ -189,7 +185,7 @@ This turns off every automatic assembly of LVM, MD raids, DM raids and
 crypto LUKS.
 
 Of course, you could also omit the dracut modules in the initramfs creation
-process, but then you would lose the posibility to turn it on on demand.
+process, but then you would lose the possibility to turn it on on demand.
 
 
 [[Injecting]]
@@ -209,7 +205,7 @@ be specified once.
 ----
 # mkdir -p rd.live.overlay/etc/cmdline.d
 # mkdir -p rd.live.overlay/etc/conf.d
-# echo "ip=auto" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
+# echo "ip=dhcp" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
 # echo export FOO=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
 # echo export BAR=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
 # tree rd.live.overlay/
@@ -246,23 +242,8 @@ specified multiple times.
 If your root partition is on a network drive, you have to have the network
 dracut modules installed to create a network aware initramfs image.
 
-On a Red Hat Enterprise Linux or Fedora system, this means, you have to install
-the _dracut-network_ rpm package:
-
-
-----
-# yum install dracut-network
-----
-
-The resulting initramfs image can be served by a boot manager residing on your
-local hard drive or it can be served by a PXE/TFTP server.
-
-How to setup your PXE/TFTP server can be found in the
-http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
-Hat Enterprise Linux Storage Administration Guide].
-
-If you specify ip=auto on the kernel command line, then dracut asks a dhcp
-server about the ip adress for the machine. The dhcp server can also serve an
+If you specify ip=dhcp on the kernel command line, then dracut asks a dhcp
+server about the ip address for the machine. The dhcp server can also serve an
 additional root-path, which will set the root device for dracut. With this
 mechanism, you have static configuration on your client machine and a
 centralized boot configuration on your TFTP/DHCP server. If you can't pass a
@@ -271,7 +252,7 @@ method described in <<Injecting>>.
 
 ==== Reducing the Image Size
 
-To reduce the size of the initramfs, you should create it with by ommitting all
+To reduce the size of the initramfs, you should create it with by omitting all
 dracut modules, which you know, you don't need to boot the machine.
 
 You can also specify the exact dracut and kernel modules to produce a very tiny
@@ -281,7 +262,7 @@ For example for a NFS image, you would do:
 
 
 ----
-# dracut -m "nfs network  base" initramfs-nfs-only.img
+# dracut -m "nfs network base" initramfs-nfs-only.img
 ----
 
 Then you would boot from this image with your target machine and reduce the size
@@ -300,7 +281,7 @@ This will reduce the size of the initramfs image significantly.
 If the boot process does not succeed, you have several options to debug the
 situation. Some of the basic operations are covered here. For more information
 you should also visit:
-http://fedoraproject.org/wiki/How_to_debug_Dracut_problems
+https://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html
 
 
 [[identifying-your-problem-area]]
@@ -325,7 +306,7 @@ stick and mount that. Then you can store the output for later inspection.
 In all cases, the following should be mentioned and attached to your bug report:
 
 * The exact kernel command-line used. Typically from the bootloader
-configuration file (e.g. _/etc/grub.conf_) or from _/proc/cmdline_.
+configuration file (e.g. _/boot/grub2/grub.cfg_) or from _/proc/cmdline_.
 * A copy of your disk partition information from _/etc/fstab_, which might be
 obtained booting an old working initramfs or a rescue medium.
 * Turn on dracut debugging (see _the 'debugging dracut' section_), and attach
@@ -360,7 +341,7 @@ logging during the system boot.  This section documents configuring a
 serial console connection to record boot messages.
 
 . First, enable serial console output for both the kernel and the bootloader.
-. Open the file _/etc/grub.conf_ for editing. Below the line ''timeout=5'', add
+. Open the file _/boot/grub2/grub.cfg_ for editing. Below the line ''timeout=5'', add
 the following:
 +
 ----
@@ -368,14 +349,14 @@ serial --unit=0 --speed=9600
 terminal --timeout=5 serial console
 ----
 +
-. Also in _/etc/grub.conf_, add the following boot arguemnts to the ''kernel''
+. Also in _/boot/grub2/grub.cfg_, add the following boot arguments to the ''kernel''
 line:
 +
 ----
 console=tty0 console=ttyS0,9600
 ----
 +
-. When finished, the _/etc/grub.conf_ file should look similar to the example
+. When finished, the _/boot/grub2/grub.cfg_ file should look similar to the example
 below.
 +
 ----
@@ -410,10 +391,10 @@ dracut offers a shell for interactive debugging in the event dracut fails to
 locate your root filesystem. To enable the shell:
 
 . Add the boot parameter ''rd.shell'' to your bootloader configuration file
-(e.g. _/etc/grub.conf_)
+(e.g. _/boot/grub2/grub.cfg_)
 . Remove the boot arguments ''rhgb'' and ''quiet''
 +
-A sample _/etc/grub.conf_ bootloader configuration file is listed below.
+A sample _/boot/grub2/grub.cfg_ bootloader configuration file is listed below.
 +
 ----
 default=0
@@ -528,7 +509,7 @@ on _pre-shutdown_ or _shutdown_.
 To do this from an already booted system:
 ----
 # mkdir -p /run/initramfs/etc/cmdline.d
-# echo "rd.break=pre-shutdown" > /run/initramfs/etc/cmdline.d/debug.conf
+# echo "rd.debug rd.break=pre-shutdown rd.break=shutdown" > /run/initramfs/etc/cmdline.d/debug.conf
 # touch /run/initramfs/.need_shutdown
 ----
 

examples/yocto/classes/dracut.bbclass

@@ -0,0 +1,116 @@
+DRACUT_PN ??= "${PN}"
+
+def dracut_compression_type(d):
+    rdtype = d.getVar("INITRAMFS_FSTYPES", True).split('.')
+    if len(rdtype) != 2:
+        return ['','','']
+    if rdtype[0] != 'cpio':
+        return ['','','']
+    cmptypes = [['gz','--gzip','gzip'],['bz2', '--bzip2','bzip2'],['lzma','--lzma','xz'],['xz','--xz','xz'],['lzo','--lzo','lzo'],['lz4','--lz4','lz4'],['zstd','--zstd','zstd']]
+    for cmp in cmptypes:
+        if rdtype[1] == cmp[0]:
+            return cmp
+    return ['','','']
+
+def dracut_compression_opt(d):
+    cmp = dracut_compression_type(d)
+    return cmp[1]
+
+def dracut_compression_pkg(d):
+    cmp = dracut_compression_type(d)
+    return cmp[2]
+
+def dracut_compression_pkg_native(d):
+    cmp = dracut_compression_type(d)
+    if cmp[2] == '':
+        return ''
+    return cmp[2] + '-native'
+
+DRACUT_COMPRESS_OPT ??= "${@dracut_compression_opt(d)}"
+DRACUT_COMPRESS_PKG ??= "${@dracut_compression_pkg(d)}"
+DRACUT_COMPRESS_PKG_NATIVE ??= "${@dracut_compression_pkg_native(d)}"
+
+DRACUT_OPTS ??= "--early-microcode ${DRACUT_COMPRESS_OPT}"
+
+python __anonymous () {
+    pkg = d.getVar("DRACUT_PN", True)
+    if pkg != 'dracut':
+        d.appendVar("RDEPENDS_%s" % pkg, " dracut %s " % d.getVar("DRACUT_COMPRESS_PKG", True))
+    if not pkg.startswith('kernel'):
+        d.appendVarFlag("do_configure", "depends", "virtual/kernel:do_shared_workdir")
+        d.appendVarFlag("do_compile", "depends", "virtual/kernel:do_compile_kernelmodules")
+}
+
+export BUILD_TIME_KERNEL_VERSION = "${@oe.utils.read_file('${STAGING_KERNEL_BUILDDIR}/kernel-abiversion')}"
+
+dracut_postinst () {
+	MY_KERNEL_VERSION=$(readlink $D/boot/bzimage | sed 's,^.*bzImage-,,')
+	if [[ -z "$MY_KERNEL_VERSION" ]]; then
+		MY_KERNEL_VERSION="${KERNEL_VERSION}"
+	fi
+	if [[ -z "$MY_KERNEL_VERSION" ]]; then
+		MY_KERNEL_VERSION="${BUILD_TIME_KERNEL_VERSION}"
+	fi
+	if [[ -z "$MY_KERNEL_VERSION" ]]; then
+		exit 1
+	fi
+
+	if [ -n "$D" ]; then
+		#DEBUGOPTS="--debug --keep"
+		DEBUGOPTS="--keep"
+
+		$INTERCEPT_DIR/postinst_intercept execute_dracut ${PKG} mlprefix=${MLPREFIX} \
+			prefix= \
+			MY_KERNEL_VERSION=$MY_KERNEL_VERSION \
+			DEBUGOPTS="\"$DEBUGOPTS\"" \
+			DRACUT_OPTS="\"${DRACUT_OPTS}\"" \
+			systemdutildir=${systemd_unitdir} \
+			systemdsystemunitdir=${systemd_system_unitdir} \
+			systemdsystemconfdir=${sysconfdir}/systemd/system \
+			udevdir=${libdir}/udev \
+			DRACUT_TMPDIR=${WORKDIR}/dracut-tmpdir \
+			DRACUT_ARCH="${TUNE_ARCH}" \
+			DRACUT_COMPRESS_GZIP=$NATIVE_ROOT${bindir}/gzip \
+			DRACUT_COMPRESS_BZIP2=$NATIVE_ROOT${bindir}/bzip2 \
+			DRACUT_COMPRESS_LZMA=$NATIVE_ROOT${bindir}/lzma \
+			DRACUT_LDD="\"PATH='$PATH' ${STAGING_BINDIR_CROSS}/ldd --root $D\"" \
+			DRACUT_LDCONFIG=$NATIVE_ROOT${bindir}/ldconfig \
+			DRACUT_INSTALL="\"$NATIVE_ROOT${libdir}/dracut/dracut-install\"" \
+			PLYMOUTH_LDD="\"${STAGING_BINDIR_CROSS}/ldd --root $D\"" \
+			PLYMOUTH_LDD_PATH="'$PATH'" \
+			PLYMOUTH_PLUGIN_PATH=${libdir}/plymouth \
+			PLYMOUTH_THEME_NAME=${PLYMOUTH_THEME_NAME:-spinner} \
+			PLYMOUTH_THEME=${PLYMOUTH_THEME_NAME:-spinner}
+	else
+		depmod -a $MY_KERNEL_VERSION
+		echo RUNNING: dracut -f ${DRACUT_OPTS} /boot/initramfs.img $MY_KERNEL_VERSION
+		echo "dracut: $(dracut --help | grep 'Version:')"
+		dracut -f ${DRACUT_OPTS} /boot/initramfs.img $MY_KERNEL_VERSION
+	fi
+}
+
+dracut_populate_packages[vardeps] += "dracut_postinst"
+
+python dracut_populate_packages() {
+    localdata = d.createCopy()
+
+    pkg = d.getVar('DRACUT_PN', True)
+
+    postinst = d.getVar('pkg_postinst_%s' % pkg, True)
+    if not postinst:
+        postinst = '#!/bin/sh\n'
+    postinst += localdata.getVar('dracut_postinst', True)
+    d.setVar('pkg_postinst_%s' % pkg, postinst)
+}
+
+PACKAGESPLITFUNCS_prepend = "dracut_populate_packages "
+
+DRACUT_DEPENDS = " \
+			binutils-cross-${TUNE_ARCH} gcc-cross-${TUNE_ARCH} \
+			ldconfig-native coreutils-native findutils-native \
+			cpio-native util-linux-native kmod-native ${DRACUT_COMPRESS_PKG_NATIVE} \
+			dracut-native pkgconfig-native cross-compiler-ldd \
+			${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'systemd', '', d)} \
+		"
+DEPENDS_append_class-target = " ${DRACUT_DEPENDS}"
+PACKAGE_WRITE_DEPS_append = " ${DRACUT_DEPENDS}"

examples/yocto/postinst-intercepts/execute_dracut

@@ -0,0 +1,44 @@
+#!/bin/sh
+
+set -e
+
+if [[ -z "$DRACUT_TMPDIR" ]]; then
+	echo "DRACUT_TMPDIR is unset, exiting"
+	exit 0
+fi
+
+# We have to unset "prefix" as dracut uses it to move files around.
+# Yocto has it set as part of the build environment.
+export prefix=
+
+# DRACUT settings
+export UDEVVERSION=241
+export SYSTEMD_VERSION=241
+export DRACUT_TESTBIN=/bin/bash.bash
+export DRACUT_INSTALL_PATH="/usr/sbin:/usr/bin:/sbin:/bin"
+
+# PLYMOUTH settings
+export PLYMOUTH_SYSROOT=$D
+
+export \
+	systemdutildir systemdsystemunitdir systemdsystemconfdir udevdir \
+	DRACUT_ARCH DRACUT_TESTBIN DRACUT_LDD DRACUT_LDCONFIG DRACUT_INSTALL \
+	DRACUT_COMPRESS_GZIP DRACUT_COMPRESS_BZIP2 DRACUT_COMPRESS_LZMA \
+	PLYMOUTH_LDD PLYMOUTH_LDD_PATH PLYMOUTH_PLUGIN_PATH \
+	PLYMOUTH_THEME_NAME PLYMOUTH_THEME
+
+# List environment for debugging
+echo ROOTFS-POSTINST-ENVIRONMENT
+echo -----------
+env
+echo -----------
+
+[[ -d $DRACUT_TMPDIR ]] || mkdir -p $DRACUT_TMPDIR
+
+# Execute depmod and dracut
+echo "$(date) - RUNNING: depmod -b $D -a $MY_KERNEL_VERSION"
+depmod -b $D -a $MY_KERNEL_VERSION
+echo "dracut: $(dracut --sysroot $D --help | grep 'Version:')"
+echo "$(date) - RUNNING: dracut -f --sysroot $D --tmpdir $DRACUT_TMPDIR $DRACUT_OPTS $DEBUGOPTS -k $D/lib/modules/$MY_KERNEL_VERSION $D/boot/initramfs.img $MY_KERNEL_VERSION"
+dracut -f --sysroot $D --tmpdir $DRACUT_TMPDIR $DRACUT_OPTS $DEBUGOPTS -k $D/lib/modules/$MY_KERNEL_VERSION $D/boot/initramfs.img $MY_KERNEL_VERSION
+echo "$(date) - DONE: dracut"

examples/yocto/recipes/cross-compiler-ldd/cross-compile-ldd-fix-infinite-loop.patch

@@ -0,0 +1,19 @@
+diff --git a/cross-compile-ldd b/cross-compile-ldd
+index ef2ca20..332d57f 100644
+--- a/cross-compile-ldd
++++ b/cross-compile-ldd
+@@ -337,13 +337,13 @@ do_scan_etc_ldsoconf() {
+ # Build up the full list of search directories
+ declare -a needed_search_path
+ do_trace "Adding basic lib dirs\n"
+-ld_library_path="${ld_library_path}:"
+ while [ -n "${ld_library_path}" ]; do
+     d="${ld_library_path%%:*}"
+     if [ -n "${d}" ]; then
+         do_trace "-> adding search dir '%s'\n" "${d}"
+         needed_search_path+=( "${d}" )
+     fi
++    [[ "$ld_library_path" == "${ld_library_path#*:}" ]] && break
+     ld_library_path="${ld_library_path#*:}"
+ done
+ do_trace "Done adding basic lib dirs\n"

examples/yocto/recipes/cross-compiler-ldd_git.bb

@@ -0,0 +1,33 @@
+SUMMARY = "Cross-compiler LDD"
+HOMEPAGE = "https://gist.github.com/c403786c1394f53f44a3b61214489e6f"
+BUGTRACKER = ""
+LICENSE = "GPLv2"
+
+LIC_FILES_CHKSUM = "file://cross-compile-ldd;beginline=53;endline=57;md5=2b29d19d18a430b931dda3750e865c84"
+
+SRCBRANCH = "master"
+SRCREV = "eb44581caf7dd60b149a6691abef46264c46e866"
+SRC_URI = " \
+			git://gist.github.com/c403786c1394f53f44a3b61214489e6f.git;protocol=https;branch=${SRCBRANCH} \
+			file://cross-compile-ldd-fix-infinite-loop.patch \
+		"
+
+S = "${WORKDIR}/git"
+
+inherit siteinfo
+
+SYSROOT_PREPROCESS_FUNCS += " cross_ldd_populate_sysroot "
+
+cross_ldd_populate_sysroot() {
+	mkdir -p ${SYSROOT_DESTDIR}${bindir_crossscripts}
+	cat ${S}/cross-compile-ldd | \
+		sed \
+			-e "s,^prefix=.*$,prefix=${TARGET_SYS}," \
+			-e "s,^bits=.*$,bits=${SITEINFO_BITS}," \
+			-e "s,^ld_library_path=.*$,ld_library_path=${LD_LIBRARY_PATH:-/lib:/usr/lib}," \
+		>${SYSROOT_DESTDIR}${bindir_crossscripts}/ldd
+	chmod +x ${SYSROOT_DESTDIR}${bindir_crossscripts}/ldd
+}
+
+DEPENDS = "coreutils-native sed-native binutils-cross-${TARGET_ARCH} gcc-cross-${TARGET_ARCH}"
+PACKAGE_WRITE_DEPS = "coreutils-native sed-native binutils-cross-${TARGET_ARCH} gcc-cross-${TARGET_ARCH}"

fedora-test-github.sh

@@ -0,0 +1,45 @@
+#!/bin/bash
+
+set -ex
+
+[[ -d ${0%/*} ]] && cd ${0%/*}
+
+RUN_ID="$1"
+TESTS=$2
+
+./configure
+
+NCPU=$(getconf _NPROCESSORS_ONLN)
+
+if ! [[ $TESTS ]]; then
+    # GitHub workflows fetch a clone of the dracut repository which doesn't
+    # contain git tags, thus "breaking" the RPM build in certain situations
+    # i.e.:
+    # DRACUT_MAIN_VERSION in Makefile is defined as an output of `git describe`,
+    # which in full git clone returns a tag with a numeric version. However,
+    # without tags it returns SHA of the last commit, which later propagates into
+    # `Provides:` attribute of the built RPM and can break dependency tree when
+    # installed
+    [[ -d .git ]] && git fetch --tags && git describe --tags
+    make -j$NCPU all syncheck rpm logtee
+else
+    if [[ $TESTS == "99" ]]; then
+        [[ -d .git ]] && git fetch --tags && git describe --tags
+        make_docs=yes
+    else
+        make_docs=no
+    fi
+
+    make -j$NCPU enable_documentation=$make_docs all logtee
+
+    cd test
+
+    time LOGTEE_TIMEOUT_MS=590000 make \
+         enable_documentation=$make_docs \
+         KVERSION=$(rpm -qa kernel --qf '%{VERSION}-%{RELEASE}.%{ARCH}\n' | sort -rn | head -1) \
+         DRACUT_NO_XATTR=1 \
+         TEST_RUN_ID=$RUN_ID \
+         ${TESTS:+TESTS="$TESTS"} \
+         -k V=1 \
+         check
+fi

fedora-test.sh

@@ -0,0 +1,30 @@
+#!/bin/bash
+
+set -ex
+
+[[ -d ${0%/*} ]] && cd ${0%/*}
+
+RUN_ID="$1"
+TESTS=$2
+
+./configure
+
+NCPU=$(getconf _NPROCESSORS_ONLN)
+
+if ! [[ $TESTS ]]; then
+    make -j$NCPU all syncheck rpm logtee
+else
+    [[ $TESTS == "99" ]] && make_docs=yes || make_docs=no
+    make -j$NCPU enable_documentation=$make_docs all logtee
+
+    cd test
+
+    time sudo LOGTEE_TIMEOUT_MS=300000 make \
+         enable_documentation=$make_docs \
+         KVERSION=$(rpm -qa kernel --qf '%{VERSION}-%{RELEASE}.%{ARCH}\n' | sort -rn | head -1) \
+         DRACUT_NO_XATTR=1 \
+         TEST_RUN_ID=$RUN_ID \
+         ${TESTS:+TESTS="$TESTS"} \
+         -k V=2 \
+         check
+fi

git2spec.pl

@@ -3,10 +3,28 @@
 sub create_patches {
     my $tag=shift;
     my $pdir=shift;
-    my $num=0;
-    open( GIT, 'git format-patch -M -N --no-signature -o "'.$pdir.'" '.$tag.' |');
-    @lines=<GIT>;
-    close GIT;         # be done
+    my $n=1;
+    my @lines;
+    my $fname;
+    my $f=0;
+
+    mkdir $pdir, 0755;
+
+    open( GIT, 'git log -p --pretty=email --stat -m --first-parent --reverse --binary '.$tag.'..HEAD |');
+
+    while (<GIT>) {
+        if (/^From [a-z0-9]{40} .*$/) {
+            $fname = sprintf("%04d", $n++).".patch";
+            open FH, ">".$pdir."/".$fname;
+            $f=1;
+        }
+        if (/^---$/ && $f == 1) {
+            push @lines, $fname;
+            $f=0;
+        }
+        print FH;
+    }
+
     return @lines;
 };
 
@@ -19,7 +37,7 @@ $tag=`git describe --abbrev=0 --tags` if not defined $tag;
 chomp($tag);
 my @patches=&create_patches($tag, $pdir);
 my $num=$#patches + 2;
-$tag=~s/[^0-9]+?([0-9]+)/$1/;
+$tag=~s/[^0-9]+?([0-9]+)/$1/ if $tag !~ /\b[0-9a-f]{5,40}\b/;
 my $release="$num.git$datestr";
 $release="1" if $num == 1;
 
@@ -27,15 +45,15 @@ while(<>) {
     if (/^Version:/) {
 	print "Version: $tag\n";
     }
-    elsif (/^Release:/) {
-	print "Release: $release%{?dist}\n";
+    elsif (/^%define dist_free_release/) {
+	print "%define dist_free_release $release\n";
     }
     elsif ((/^Source0:/) || (/^Source:/)) {
 	print $_;
 	$num=1;
 	for(@patches) {
 	    s/.*\///g;
-	    print "Patch$num: $_";
+	    print "Patch$num: $_\n";
 	    $num++;
 	}
 	print "\n";

install/.kateconfig

@@ -0,0 +1 @@
+kate: space-indent on; tab-width 8; indent-width 8; replace-tabs on; eol unix;

install/hashmap.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 
@@ -43,86 +41,10 @@ struct Hashmap {
 
         struct hashmap_entry *iterate_list_head, *iterate_list_tail;
         unsigned n_entries;
-
-        bool from_pool;
 };
 
 #define BY_HASH(h) ((struct hashmap_entry**) ((uint8_t*) (h) + ALIGN(sizeof(Hashmap))))
 
-struct pool {
-        struct pool *next;
-        unsigned n_tiles;
-        unsigned n_used;
-};
-
-static struct pool *first_hashmap_pool = NULL;
-static void *first_hashmap_tile = NULL;
-
-static struct pool *first_entry_pool = NULL;
-static void *first_entry_tile = NULL;
-
-static void* allocate_tile(struct pool **first_pool, void **first_tile, size_t tile_size) {
-        unsigned i;
-
-        if (*first_tile) {
-                void *r;
-
-                r = *first_tile;
-                *first_tile = * (void**) (*first_tile);
-                return r;
-        }
-
-        if (_unlikely_(!*first_pool) || _unlikely_((*first_pool)->n_used >= (*first_pool)->n_tiles)) {
-                unsigned n;
-                size_t size;
-                struct pool *p;
-
-                n = *first_pool ? (*first_pool)->n_tiles : 0;
-                n = MAX(512U, n * 2);
-                size = PAGE_ALIGN(ALIGN(sizeof(struct pool)) + n*tile_size);
-                n = (size - ALIGN(sizeof(struct pool))) / tile_size;
-
-                p = malloc(size);
-                if (!p)
-                        return NULL;
-
-                p->next = *first_pool;
-                p->n_tiles = n;
-                p->n_used = 0;
-
-                *first_pool = p;
-        }
-
-        i = (*first_pool)->n_used++;
-
-        return ((uint8_t*) (*first_pool)) + ALIGN(sizeof(struct pool)) + i*tile_size;
-}
-
-static void deallocate_tile(void **first_tile, void *p) {
-        * (void**) p = *first_tile;
-        *first_tile = p;
-}
-
-#ifndef __OPTIMIZE__
-
-static void drop_pool(struct pool *p) {
-        while (p) {
-                struct pool *n;
-                n = p->next;
-                free(p);
-                p = n;
-        }
-}
-
-__attribute__((destructor)) static void cleanup_pool(void) {
-        /* Be nice to valgrind */
-
-        drop_pool(first_hashmap_pool);
-        drop_pool(first_entry_pool);
-}
-
-#endif
-
 unsigned string_hash_func(const void *p) {
         unsigned hash = 5381;
         const signed char *c;
@@ -148,26 +70,15 @@ int trivial_compare_func(const void *a, const void *b) {
 }
 
 Hashmap *hashmap_new(hash_func_t hash_func, compare_func_t compare_func) {
-        bool b;
         Hashmap *h;
         size_t size;
 
-        b = is_main_thread();
-
         size = ALIGN(sizeof(Hashmap)) + NBUCKETS * sizeof(struct hashmap_entry*);
 
-        if (b) {
-                h = allocate_tile(&first_hashmap_pool, &first_hashmap_tile, size);
-                if (!h)
-                        return NULL;
+        h = malloc0(size);
 
-                memset(h, 0, size);
-        } else {
-                h = malloc0(size);
-
-                if (!h)
-                        return NULL;
-        }
+        if (!h)
+                return NULL;
 
         h->hash_func = hash_func ? hash_func : trivial_hash_func;
         h->compare_func = compare_func ? compare_func : trivial_compare_func;
@@ -175,8 +86,6 @@ Hashmap *hashmap_new(hash_func_t hash_func, compare_func_t compare_func) {
         h->n_entries = 0;
         h->iterate_list_head = h->iterate_list_tail = NULL;
 
-        h->from_pool = b;
-
         return h;
 }
 
@@ -247,7 +156,8 @@ static void unlink_entry(Hashmap *h, struct hashmap_entry *e, unsigned hash) {
         h->n_entries--;
 }
 
-static void remove_entry(Hashmap *h, struct hashmap_entry *e) {
+static void remove_entry(Hashmap *h, struct hashmap_entry **ep) {
+        struct hashmap_entry *e = *ep;
         unsigned hash;
 
         assert(h);
@@ -257,10 +167,8 @@ static void remove_entry(Hashmap *h, struct hashmap_entry *e) {
 
         unlink_entry(h, e, hash);
 
-        if (h->from_pool)
-                deallocate_tile(&first_entry_tile, e);
-        else
-                free(e);
+        free(e);
+        *ep = NULL;
 }
 
 void hashmap_free(Hashmap*h) {
@@ -270,10 +178,7 @@ void hashmap_free(Hashmap*h) {
 
         hashmap_clear(h);
 
-        if (h->from_pool)
-                deallocate_tile(&first_hashmap_tile, h);
-        else
-                free(h);
+        free(h);
 }
 
 void hashmap_free_free(Hashmap *h) {
@@ -289,8 +194,10 @@ void hashmap_clear(Hashmap *h) {
         if (!h)
                 return;
 
-        while (h->iterate_list_head)
-                remove_entry(h, h->iterate_list_head);
+        while (h->iterate_list_head) {
+                struct hashmap_entry *e = h->iterate_list_head;
+                remove_entry(h, &e);
+        }
 }
 
 static struct hashmap_entry *hash_scan(Hashmap *h, unsigned hash, const void *key) {
@@ -321,10 +228,7 @@ int hashmap_put(Hashmap *h, const void *key, void *value) {
                 return -EEXIST;
         }
 
-        if (h->from_pool)
-                e = allocate_tile(&first_entry_pool, &first_entry_tile, sizeof(struct hashmap_entry));
-        else
-                e = new(struct hashmap_entry, 1);
+        e = new(struct hashmap_entry, 1);
 
         if (!e)
                 return -ENOMEM;
@@ -383,7 +287,7 @@ void* hashmap_remove(Hashmap *h, const void *key) {
                 return NULL;
 
         data = e->value;
-        remove_entry(h, e);
+        remove_entry(h, &e);
 
         return data;
 }
@@ -428,7 +332,7 @@ int hashmap_remove_and_replace(Hashmap *h, const void *old_key, const void *new_
 
         if ((k = hash_scan(h, new_hash, new_key)))
                 if (e != k)
-                        remove_entry(h, k);
+                        remove_entry(h, &k);
 
         unlink_entry(h, e, old_hash);
 
@@ -455,7 +359,7 @@ void* hashmap_remove_value(Hashmap *h, const void *key, void *value) {
         if (e->value != value)
                 return NULL;
 
-        remove_entry(h, e);
+        remove_entry(h, &e);
 
         return value;
 }
@@ -581,6 +485,7 @@ void* hashmap_last(Hashmap *h) {
 }
 
 void* hashmap_steal_first(Hashmap *h) {
+        struct hashmap_entry *e;
         void *data;
 
         if (!h)
@@ -589,13 +494,15 @@ void* hashmap_steal_first(Hashmap *h) {
         if (!h->iterate_list_head)
                 return NULL;
 
-        data = h->iterate_list_head->value;
-        remove_entry(h, h->iterate_list_head);
+        e = h->iterate_list_head;
+        data = e->value;
+        remove_entry(h, &e);
 
         return data;
 }
 
 void* hashmap_steal_first_key(Hashmap *h) {
+        struct hashmap_entry *e;
         void *key;
 
         if (!h)
@@ -604,8 +511,9 @@ void* hashmap_steal_first_key(Hashmap *h) {
         if (!h->iterate_list_head)
                 return NULL;
 
-        key = (void*) h->iterate_list_head->key;
-        remove_entry(h, h->iterate_list_head);
+        e = h->iterate_list_head;
+        key = (void*) e->key;
+        remove_entry(h, &e);
 
         return key;
 }
@@ -696,22 +604,6 @@ int hashmap_move_one(Hashmap *h, Hashmap *other, const void *key) {
         return 0;
 }
 
-Hashmap *hashmap_copy(Hashmap *h) {
-        Hashmap *copy;
-
-        assert(h);
-
-        if (!(copy = hashmap_new(h->hash_func, h->compare_func)))
-                return NULL;
-
-        if (hashmap_merge(copy, h) < 0) {
-                hashmap_free(copy);
-                return NULL;
-        }
-
-        return copy;
-}
-
 char **hashmap_get_strv(Hashmap *h) {
         char **sv;
         Iterator it;

install/hashmap.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef foohashmaphfoo
 #define foohashmaphfoo
 
@@ -48,7 +46,6 @@ int trivial_compare_func(const void *a, const void *b);
 Hashmap *hashmap_new(hash_func_t hash_func, compare_func_t compare_func);
 void hashmap_free(Hashmap *h);
 void hashmap_free_free(Hashmap *h);
-Hashmap *hashmap_copy(Hashmap *h);
 int hashmap_ensure_allocated(Hashmap **h, hash_func_t hash_func, compare_func_t compare_func);
 
 int hashmap_put(Hashmap *h, const void *key, void *value);

install/log.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 
@@ -103,11 +101,10 @@ void log_set_facility(int facility) {
 static int write_to_console(
                 int level,
                 const char*file,
-                int line,
+                unsigned int line,
                 const char *func,
                 const char *buffer) {
 
-        char location[64];
         struct iovec iovec[5];
         unsigned n = 0;
 
@@ -119,7 +116,9 @@ static int write_to_console(
         IOVEC_SET_STRING(iovec[n++], "dracut-install: ");
 
         if (show_location) {
-                snprintf(location, sizeof(location), "(%s:%u) ", file, line);
+                char location[64];
+                if (snprintf(location, sizeof(location), "(%s:%u) ", file, line) <= 0)
+                        return -errno;
                 IOVEC_SET_STRING(iovec[n++], location);
         }
 
@@ -265,14 +264,21 @@ int log_set_max_level_from_string(const char *e) {
 void log_parse_environment(void) {
         const char *e;
 
-        if ((e = getenv("DRACUT_LOG_TARGET")))
+        if ((e = getenv("DRACUT_INSTALL_LOG_TARGET"))) {
                 if (log_set_target_from_string(e) < 0)
                         log_warning("Failed to parse log target %s. Ignoring.", e);
+        } else if ((e = getenv("DRACUT_LOG_TARGET"))) {
+                if (log_set_target_from_string(e) < 0)
+                        log_warning("Failed to parse log target %s. Ignoring.", e);
+        }
 
-        if ((e = getenv("DRACUT_LOG_LEVEL")))
+        if ((e = getenv("DRACUT_INSTALL_LOG_LEVEL"))) {
                 if (log_set_max_level_from_string(e) < 0)
                         log_warning("Failed to parse log level %s. Ignoring.", e);
-
+        } else if ((e = getenv("DRACUT_LOG_LEVEL"))) {
+                if (log_set_max_level_from_string(e) < 0)
+                        log_warning("Failed to parse log level %s. Ignoring.", e);
+        }
 }
 
 LogTarget log_get_target(void) {

install/log.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef foologhfoo
 #define foologhfoo
 

install/macro.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #pragma once
 
 /***
@@ -207,7 +205,7 @@ static inline size_t IOVEC_INCREMENT(struct iovec *i, unsigned n, size_t k) {
         for (j = 0; j < n; j++) {
                 size_t sub;
 
-                if (_unlikely_(k <= 0))
+                if (_unlikely_(k == 0))
                         break;
 
                 sub = MIN(i[j].iov_len, k);

install/strv.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 
@@ -84,7 +82,7 @@ char **strv_copy(char * const *l) {
         return r;
 }
 
-unsigned strv_length(char * const *l) {
+unsigned int strv_length(char * const *l) {
         unsigned n = 0;
 
         if (!l)
@@ -299,7 +297,7 @@ char **strv_split_quoted(const char *s) {
 
 char **strv_split_newlines(const char *s) {
         char **l;
-        unsigned n;
+        unsigned int n;
 
         assert(s);
 
@@ -311,7 +309,7 @@ char **strv_split_newlines(const char *s) {
                 return NULL;
 
         n = strv_length(l);
-        if (n <= 0)
+        if (n == 0)
                 return l;
 
         if (isempty(l[n-1])) {
@@ -491,9 +489,9 @@ char **strv_parse_nulstr(const char *s, size_t l) {
         unsigned c = 0, i = 0;
         char **v;
 
-        assert(s || l <= 0);
+        assert(s || l == 0);
 
-        if (l <= 0)
+        if (l == 0)
                 return new0(char*, 1);
 
         for (p = s; p < s + l; p++)

install/strv.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #pragma once
 
 /***
@@ -34,7 +32,7 @@ DEFINE_TRIVIAL_CLEANUP_FUNC(char**, strv_free);
 #define _cleanup_strv_free_ _cleanup_(strv_freep)
 
 char **strv_copy(char * const *l);
-unsigned strv_length(char * const *l) _pure_;
+unsigned int strv_length(char * const *l) _pure_;
 
 char **strv_merge(char **a, char **b);
 char **strv_merge_concat(char **a, char **b, const char *suffix);

install/util.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 
@@ -224,7 +222,7 @@ char *strappend(const char *s, const char *suffix) {
 char *strjoin(const char *x, ...) {
         va_list ap;
         size_t l;
-        char *r, *p;
+        char *r;
 
         va_start(ap, x);
 
@@ -257,6 +255,8 @@ char *strjoin(const char *x, ...) {
                 return NULL;
 
         if (x) {
+                char *p;
+
                 p = stpcpy(r, x);
 
                 va_start(ap, x);

install/util.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef fooutilhfoo
 #define fooutilhfoo
 
@@ -22,6 +20,8 @@
   along with systemd; If not, see <http://www.gnu.org/licenses/>.
 ***/
 
+#define _GNU_SOURCE
+
 #include <inttypes.h>
 #include <time.h>
 #include <sys/time.h>
@@ -29,6 +29,7 @@
 #include <stdbool.h>
 #include <stdlib.h>
 #include <stdio.h>
+#include <string.h>
 #include <signal.h>
 #include <sched.h>
 #include <limits.h>
@@ -166,7 +167,7 @@ int safe_atoi(const char *s, int *ret_i);
 int safe_atollu(const char *s, unsigned long long *ret_u);
 int safe_atolli(const char *s, long long int *ret_i);
 
-#if __WORDSIZE == 32
+#if LONG_MAX == INT_MAX
 static inline int safe_atolu(const char *s, unsigned long *ret_u) {
         assert_cc(sizeof(unsigned long) == sizeof(unsigned));
         return safe_atou(s, (unsigned*) ret_u);

logtee.c

@@ -0,0 +1,73 @@
+#define _GNU_SOURCE
+#include <fcntl.h>
+#include <poll.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <limits.h>
+
+#define BUFLEN 4096
+
+int
+main(int argc, char *argv[])
+{
+	int fd;
+	int len, slen;
+	int ret;
+	int timeout;
+	char *timeout_env;
+	struct pollfd fds[] = {{
+		.fd = STDIN_FILENO,
+		.events = POLLIN | POLLERR,
+	}};
+
+	timeout_env = getenv("LOGTEE_TIMEOUT_MS");
+	if (timeout_env)
+		timeout = atoi(timeout_env);
+	else
+		timeout = -1;
+
+	if (argc != 2) {
+		fprintf(stderr, "Usage: %s <file>\n", argv[0]);
+		exit(EXIT_FAILURE);
+	}
+
+	fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_NONBLOCK, 0644);
+	if (fd == -1) {
+		perror("open");
+		exit(EXIT_FAILURE);
+	}
+
+	fprintf(stderr, "Logging to %s: ", argv[1]);
+
+	slen = 0;
+
+	do {
+		ret = poll (fds, sizeof(fds) / sizeof(fds[0]), timeout);
+		if (ret == 0) {
+			fprintf (stderr, "Timed out after %d milliseconds of no output.\n", timeout);
+			exit(EXIT_FAILURE);
+		}
+		len = splice(STDIN_FILENO, NULL, fd, NULL,
+			     BUFLEN, SPLICE_F_MOVE | SPLICE_F_NONBLOCK);
+
+		if (len < 0) {
+			if (errno == EAGAIN)
+				continue;
+			perror("tee");
+			exit(EXIT_FAILURE);
+		} else
+			if (len == 0)
+				break;
+		slen += len;
+		if ((slen/BUFLEN) > 0) {
+			fprintf(stderr, ".");
+		}
+		slen = slen % BUFLEN;
+
+	} while (1);
+	close(fd);
+	fprintf(stderr, "\n");
+	exit(EXIT_SUCCESS);
+}

lsinitrd-bash-completion.sh

@@ -1,7 +1,4 @@
 #
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-#
 # Copyright 2013 Red Hat, Inc.  All rights reserved.
 #
 # This program is free software; you can redistribute it and/or modify

lsinitrd.1.asc

@@ -3,6 +3,7 @@ LSINITRD(1)
 :doctype: manpage
 :man source:   dracut
 :man manual:   dracut
+:man version:  {version}
 
 NAME
 ----
@@ -34,6 +35,21 @@ OPTIONS
 **-k, --kver** _<kernel version>_::
     inspect the initramfs of <kernel version>.
 
+**-m, --mod**::
+    list dracut modules included of the initramfs image.
+
+**--unpack**::
+    unpack the initramfs to the current directory, instead of displaying the contents.
+    If optional filenames are given, will only unpack specified files, else the whole image will be unpacked.
+    Won't unpack anything from early cpio part.
+
+**--unpackearly**::
+    unpack the early microcode initramfs to the current directory, instead of displaying the contents.
+    Same as --unpack, but only unpack files from early cpio part.
+
+**-v, --verbose**::
+    unpack verbosely
+
 AVAILABILITY
 ------------
 The lsinitrd command is part of the dracut package and is available from

lsinitrd.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Copyright 2005-2010 Harald Hoyer <harald@redhat.com>
 # Copyright 2005-2010 Red Hat, Inc.  All rights reserved.
@@ -27,7 +25,14 @@ usage()
         echo
         echo "-h, --help                  print a help message and exit."
         echo "-s, --size                  sort the contents of the initramfs by size."
+        echo "-m, --mod                   list modules."
         echo "-f, --file <filename>       print the contents of <filename>."
+        echo "--unpack                    unpack the initramfs, instead of displaying the contents."
+        echo "                            If optional filenames are given, will only unpack specified files,"
+        echo "                            else the whole image will be unpacked. Won't unpack anything from early cpio part."
+        echo "--unpackearly               unpack the early microcode part of the initramfs."
+        echo "                            Same as --unpack, but only unpack files from early cpio part."
+        echo "-v, --verbose               unpack verbosely."
         echo "-k, --kver <kernel version> inspect the initramfs of <kernel version>."
         echo
     } >&2
@@ -37,15 +42,21 @@ usage()
 [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
 
 sorted=0
+modules=0
+unset verbose
 declare -A filenames
 
 unset POSIXLY_CORRECT
 TEMP=$(getopt \
-    -o "shf:k:" \
+    -o "vshmf:k:" \
     --long kver: \
     --long file: \
+    --long mod \
     --long help \
     --long size \
+    --long unpack \
+    --long unpackearly \
+    --long verbose \
     -- "$@")
 
 if (( $? != 0 )); then
@@ -57,12 +68,16 @@ eval set -- "$TEMP"
 
 while (($# > 0)); do
     case $1 in
-        -k|--kver)  KERNEL_VERSION="$2"; shift;;
-        -f|--file)  filenames[${2#/}]=1; shift;;
-        -s|--size)  sorted=1;;
-        -h|--help)  usage; exit 0;;
-        --)         shift;break;;
-        *)          usage; exit 1;;
+        -k|--kver)     KERNEL_VERSION="$2"; shift;;
+        -f|--file)     filenames[${2#/}]=1; shift;;
+        -s|--size)     sorted=1;;
+        -h|--help)     usage; exit 0;;
+        -m|--mod)      modules=1;;
+        -v|--verbose)  verbose="--verbose";;
+        --unpack)      unpack=1;;
+        --unpackearly) unpackearly=1;;
+        --)            shift;break;;
+        *)             usage; exit 1;;
     esac
     shift
 done
@@ -106,34 +121,113 @@ if ! [[ -f "$image" ]]; then
     exit 1
 fi
 
+TMPDIR="$(mktemp -d -t lsinitrd.XXXXXX)"
+trap "rm -rf '$TMPDIR'" EXIT
+
+dracutlibdirs() {
+    for d in lib64/dracut lib/dracut usr/lib64/dracut usr/lib/dracut; do
+        echo "$d/$1"
+    done
+}
+
 extract_files()
 {
     (( ${#filenames[@]} == 1 )) && nofileinfo=1
-    for f in ${!filenames[@]}; do
+    for f in "${!filenames[@]}"; do
         [[ $nofileinfo ]] || echo "initramfs:/$f"
         [[ $nofileinfo ]] || echo "========================================================================"
-        $CAT $image | cpio --extract --verbose --quiet --to-stdout $f 2>/dev/null
+        $CAT "$image" 2>/dev/null | cpio --extract --verbose --quiet --to-stdout "$f" 2>/dev/null
         ((ret+=$?))
         [[ $nofileinfo ]] || echo "========================================================================"
         [[ $nofileinfo ]] || echo
     done
 }
 
+list_modules()
+{
+    echo "dracut modules:"
+    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+        $(dracutlibdirs modules.txt) 2>/dev/null
+    ((ret+=$?))
+}
+
 list_files()
 {
     echo "========================================================================"
     if [ "$sorted" -eq 1 ]; then
-        $CAT "$image" | cpio --extract --verbose --quiet --list | sort -n -k5
+        $CAT "$image" 2>/dev/null | cpio --extract --verbose --quiet --list | sort -n -k5
     else
-        $CAT "$image" | cpio --extract --verbose --quiet --list | sort -k9
+        $CAT "$image" 2>/dev/null | cpio --extract --verbose --quiet --list | sort -k9
     fi
     ((ret+=$?))
     echo "========================================================================"
 }
 
+list_squash_content()
+{
+    SQUASH_IMG="squash/root.img"
+    SQUASH_TMPFILE="$TMPDIR/initrd.root.sqsh"
+
+    $CAT "$image" 2>/dev/null | cpio --extract --verbose --quiet --to-stdout -- \
+        $SQUASH_IMG > "$SQUASH_TMPFILE" 2>/dev/null
+    if [[ -s $SQUASH_TMPFILE ]]; then
+        echo "Squashed content ($SQUASH_IMG):"
+        echo "========================================================================"
+        unsquashfs -ll "$SQUASH_TMPFILE" | tail -n +4
+        echo "========================================================================"
+    fi
+}
+
+unpack_files()
+{
+    if (( ${#filenames[@]} > 0 )); then
+        for f in "${!filenames[@]}"; do
+            $CAT "$image" 2>/dev/null | cpio -id --quiet $verbose $f
+            ((ret+=$?))
+        done
+    else
+        $CAT "$image" 2>/dev/null | cpio -id --quiet $verbose
+        ((ret+=$?))
+    fi
+}
+
+read -N 2 bin < "$image"
+if [ "$bin" = "MZ" ]; then
+    command -v objcopy > /dev/null || { echo "Need 'objcopy' to unpack an UEFI executable."; exit 1; }
+    objcopy \
+        --dump-section .linux="$TMPDIR/vmlinuz" \
+        --dump-section .initrd="$TMPDIR/initrd.img" \
+        --dump-section .cmdline="$TMPDIR/cmdline.txt" \
+        --dump-section .osrel="$TMPDIR/osrel.txt" \
+        "$image" /dev/null
+    uefi="$image"
+    image="$TMPDIR/initrd.img"
+    [ -f "$image" ] || exit 1
+fi
+
+if (( ${#filenames[@]} <= 0 )) && [[ -z "$unpack" ]] && [[ -z "$unpackearly" ]]; then
+    if [ -n "$uefi" ]; then
+        echo -n "initrd in UEFI: $uefi: "
+        du -h $image | while read a b || [ -n "$a" ]; do echo $a;done
+        if [ -f "$TMPDIR/osrel.txt" ]; then
+            name=$(sed -En '/^PRETTY_NAME/ s/^\w+=["'"'"']?([^"'"'"'$]*)["'"'"']?/\1/p' "$TMPDIR/osrel.txt")
+            id=$(sed -En '/^ID/ s/^\w+=["'"'"']?([^"'"'"'$]*)["'"'"']?/\1/p' "$TMPDIR/osrel.txt")
+            build=$(sed -En '/^BUILD_ID/ s/^\w+=["'"'"']?([^"'"'"'$]*)["'"'"']?/\1/p' "$TMPDIR/osrel.txt")
+            echo "OS Release: $name (${id}-${build})"
+        fi
+        if [ -f "$TMPDIR/vmlinuz" ]; then
+            version=$(strings -n 20 "$TMPDIR/vmlinuz" | sed -En '/[0-9]+\.[0-9]+\.[0-9]+/ { p; q 0 }')
+            echo "Kernel Version: $version"
+        fi
+        if [ -f "$TMPDIR/cmdline.txt" ]; then
+            echo "Command line:"
+            sed -En 's/\s+/\n/g; s/\x00/\n/; p' "$TMPDIR/cmdline.txt"
+        fi
+    else
+        echo -n "Image: $image: "
+        du -h $image | while read a b || [ -n "$a" ]; do echo $a;done
+    fi
 
-if (( ${#filenames[@]} <= 0 )); then
-    echo "Image: $image: $(du -h $image | while read a b; do echo $a;done)"
     echo "========================================================================"
 fi
 
@@ -142,14 +236,25 @@ case $bin in
     $'\x71\xc7'*|070701)
         CAT="cat --"
         is_early=$(cpio --extract --verbose --quiet --to-stdout -- 'early_cpio' < "$image" 2>/dev/null)
+        # Debian mkinitramfs does not create the file 'early_cpio', so let's check if firmware files exist
+        [[ "$is_early" ]] || is_early=$(cpio --list --verbose --quiet --to-stdout -- 'kernel/*/microcode/*.bin' < "$image" 2>/dev/null)
         if [[ "$is_early" ]]; then
-            if (( ${#filenames[@]} > 0 )); then
+            if [[ -n "$unpack" ]]; then
+                # should use --unpackearly for early CPIO
+                :
+            elif [[ -n "$unpackearly" ]]; then
+                unpack_files
+            elif (( ${#filenames[@]} > 0 )); then
                 extract_files
             else
                 echo "Early CPIO image"
                 list_files
             fi
-            SKIP="$dracutbasedir/skipcpio"
+            if [[ -d "$dracutbasedir/skipcpio" ]]; then
+                SKIP="$dracutbasedir/skipcpio/skipcpio"
+            else
+                SKIP="$dracutbasedir/skipcpio"
+            fi
             if ! [[ -x $SKIP ]]; then
                 echo
                 echo "'$SKIP' not found, cannot display remaining contents!" >&2
@@ -160,24 +265,35 @@ case $bin in
         ;;
 esac
 
-if [[ $SKIP ]]; then
-    read -N 6 bin < <($SKIP "$image")
+if [[ $SKIP ]] ; then
+    bin="$($SKIP "$image" | { read -N 6 bin && echo "$bin" ; })"
+else
+    read -N 6 bin < "$image"
 fi
-
 case $bin in
     $'\x1f\x8b'*)
-        CAT="zcat --";;
+        CAT="zcat --"
+        ;;
     BZh*)
-        CAT="bzcat --";;
+        CAT="bzcat --"
+        ;;
     $'\x71\xc7'*|070701)
         CAT="cat --"
         ;;
-    $'\x04\x22'*)
-        CAT="lz4 -d -c";;
+    $'\x02\x21'*)
+        CAT="lz4 -d -c"
+        ;;
+    $'\x89'LZO$'\0'*)
+        CAT="lzop -d -c"
+        ;;
+    $'\x28\xB5\x2F\xFD'*)
+        CAT="zstd -d -c"
+        ;;
     *)
-        CAT="xzcat --";
         if echo "test"|xz|xzcat --single-stream >/dev/null 2>&1; then
             CAT="xzcat --single-stream --"
+        else
+            CAT="xzcat --"
         fi
         ;;
 esac
@@ -192,22 +308,40 @@ if [[ $SKIP ]]; then
     CAT=skipcpio
 fi
 
+if (( ${#filenames[@]} > 1 )); then
+    TMPFILE="$TMPDIR/initrd.cpio"
+    $CAT "$image" 2>/dev/null > $TMPFILE
+    pre_decompress()
+    {
+        cat $TMPFILE
+    }
+    CAT=pre_decompress
+fi
+
 ret=0
 
-if (( ${#filenames[@]} > 0 )); then
+if [[ -n "$unpack" ]]; then
+    unpack_files
+elif (( ${#filenames[@]} > 0 )); then
     extract_files
 else
-    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/dracut-*' 'usr/lib/dracut/dracut-*' 2>/dev/null)
+    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+        $(dracutlibdirs 'dracut-*') 2>/dev/null)
     ((ret+=$?))
     echo "Version: $version"
     echo
-    echo -n "Arguments: "
-    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/build-parameter.txt' 'usr/lib/dracut/build-parameter.txt' 2>/dev/null
-    echo
-    echo "dracut modules:"
-    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/modules.txt' 'usr/lib/dracut/modules.txt' 2>/dev/null
-    ((ret+=$?))
-    list_files
+    if [ "$modules" -eq 1 ]; then
+        list_modules
+        echo "========================================================================"
+    else
+        echo -n "Arguments: "
+        $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+            $(dracutlibdirs build-parameter.txt) 2>/dev/null
+        echo
+        list_modules
+        list_files
+        list_squash_content
+    fi
 fi
 
 exit $ret

mkinitrd-dracut.sh

@@ -53,20 +53,20 @@ default_kernel_images() {
     local regex kernel_image kernel_version version_version initrd_image
     local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
 
-    case "$(uname -m)" in
+    case "${DRACUT_ARCH:-$(uname -m)}" in
         s390|s390x)
             regex='image'
             ;;
-        ppc|ppc64)
+        ppc*)
             regex='vmlinux'
             ;;
-        i386|x86_64)
+        i?86|x86_64)
             regex='vmlinuz'
             ;;
         arm*)
             regex='[uz]Image'
             ;;
-        aarch64)
+        aarch64|riscv64)
             regex='Image'
             ;;
         *)  regex='vmlinu.'

mkinitrd-suse.8.asc

@@ -18,7 +18,7 @@ DESCRIPTION
 version <kernel-version> by calling *dracut*.
 
 [IMPORTANT]
-This version of mkinitrd is provided for compability with older
+This version of mkinitrd is provided for compatibility with older
 versions of mkinitrd. If a more fine grained control over the
 resulting image is needed, *dracut* should be called directly.
 
@@ -29,8 +29,9 @@ OPTIONS
 
 **-k** _<kernel_list>_::
     List of kernel images for which initrd files are created (relative
-    to _boot_dir_), defaults to _vmlinux_ on ppc/ppc64, _image_ on s390/s390x
-    and _vmlinuz_ for everything else.
+    to _boot_dir_), Image name should begin with the following string,
+    defaults to _vmlinux_ on ppc/ppc64, _image_ on s390/s390x and _vmlinuz_
+    for everything else.
 
 **-i** _<initrd_list>_::
     List of file names (relative to _boot_dir_) for the initrd; positions
@@ -50,7 +51,7 @@ OPTIONS
 
 **-d** _<root_device>_::
     Root device, defaults to the device from which the root_dir is
-    mounted; overwrites the rootdev enviroment variable if set
+    mounted; overwrites the rootdev environment variable if set
 
 **-s** _<size>_::
     Add splash animation and bootscreen to initrd.
@@ -76,7 +77,9 @@ OPTIONS
 
 **-A**::
     Create a so called "monster initrd" which includes all available
-    features and modules.
+    features and modules. This calls dracut with --no-hostonly and
+    --no-hostonly-cmdline parameters internally, instead of the default
+    --hostonly and --hostonly-cmdline.
 
 **-v, --verbose**::
     increase verbosity level
@@ -85,9 +88,6 @@ OPTIONS
     Disable logging to _/var/log/YaST2/mkinitrd.log_. This is useful for
     testing if you don’t want to clutter the system log.
 
-**--force**::
-    overwrite existing initramfs file.
-
 **--help**::
     print a help message and exit.
 

mkinitrd-suse.sh

@@ -1,8 +1,6 @@
 #!/bin/bash --norc
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
-# mkinitrd compability wrapper for SUSE.
+# mkinitrd compatibility wrapper for SUSE.
 #
 # Copyright (c) 2013 SUSE Linux Products GmbH. All rights reserved.
 #
@@ -22,8 +20,6 @@
 
 boot_dir="/boot"
 quiet=0
-host_only=1
-force=0
 logfile=/var/log/YaST2/mkinitrd.log
 dracut_cmd=dracut
 
@@ -66,14 +62,11 @@ usage () {
     $cmd "				/etc/sysconfig/kernel."
     $cmd "	-d root_device		Root device. Defaults to the device from"
     $cmd "				which / is mounted. Overrides the rootdev"
-    $cmd "				enviroment variable if set."
+    $cmd "				environment variable if set."
     $cmd "	-j device		Journal device"
     $cmd "	-D interface		Run dhcp on the specified interface."
     $cmd "	-I interface		Configure the specified interface statically."
-    $cmd "	-a acpi_dsdt		Attach compiled ACPI DSDT (Differentiated"
-    $cmd "				System Description Table) to initrd. This"
-    $cmd "				replaces the DSDT of the BIOS. Defaults to"
-    $cmd "				the ACPI_DSDT variable in /etc/sysconfig/kernel."
+    $cmd "	-a acpi_dsdt		Obsolete, do not use."
     $cmd "	-s size			Add splash animation and bootscreen to initrd."
 
     [[ $1 = '-n' ]] && exit 0
@@ -111,7 +104,7 @@ calc_netmask() {
     local prefix=$1
 
     [ -z "$prefix" ] && return
-    mask=$(echo "(2 ^ 32) - (2 ^ $prefix)" | bc -l)
+    mask=$(( 0xffffffff << (32 - $prefix) ))
     byte1=$(( mask >> 24 ))
     byte2=$(( mask >> 16 ))
     byte3=$(( mask >> 8 ))
@@ -152,26 +145,39 @@ is_xen_kernel() {
     return
 }
 
+kernel_version_from_image() {
+    local dir="${1%/*}/"
+    [[ "$dir" != "$1" ]] || dir=""
+    local kernel_image="$1" kernel_image_gz="${dir}vmlinux-${1#*-}.gz"
+    echo kernel_image_gz="'$kernel_image_gz'" >&2
+
+    if get_kernel_version "$kernel_image" 2>/dev/null; then
+        return
+    fi
+
+    # As a last resort, try vmlinux-$version.gz, which might be around
+    get_kernel_version "$kernel_image_gz" 2>/dev/null
+}
 
 # Taken over from SUSE mkinitrd
 default_kernel_images() {
     local regex kernel_image kernel_version version_version initrd_image
     local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
 
-    case "$(uname -m)" in
+    case "${DRACUT_ARCH:-$(uname -m)}" in
         s390|s390x)
             regex='image'
             ;;
         ppc|ppc64)
             regex='vmlinux'
             ;;
-        i386|x86_64)
+        i?86|x86_64)
             regex='vmlinuz'
             ;;
         arm*)
             regex='[uz]Image'
             ;;
-        aarch64)
+        aarch64|riscv64)
             regex='Image'
             ;;
         *)  regex='vmlinu.'
@@ -190,7 +196,8 @@ default_kernel_images() {
 
         [ -L "$boot_dir/$kernel_image" ] && continue
         [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
-        kernel_version=$(/usr/bin/get_kernel_version \
+
+        kernel_version=$(kernel_version_from_image \
                          $boot_dir/$kernel_image 2> /dev/null)
         initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
         if [ "$kernel_image" != "$initrd_image" -a \
@@ -206,8 +213,6 @@ default_kernel_images() {
     for initrd_image in $initrd_images;do
 	targets="$targets $initrd_image"
     done
-    host_only=1
-    force=1
 }
 
 while (($# > 0)); do
@@ -218,13 +223,13 @@ while (($# > 0)); do
 	-k) # Would be nice to get a list of images here
 	    read_arg kernel_images "$@" || shift $?
 	    for kernel_image in $kernel_images;do
+		[ -L "/boot/$kernel_image" ] && kernel_image="$(readlink "/boot/$kernel_image")"
 		kernels="$kernels ${kernel_image#*-}"
 	    done
-	    host_only=1
-	    force=1
 	    ;;
 	-i) read_arg initrd_images "$@" || shift $?
 	    for initrd_image in $initrd_images;do
+		[ -L "/boot/$initrd_image" ] && initrd_image="$(readlink "/boot/$initrd_image")"
 		# Check if the initrd_image contains a path.
 		# if not, then add the default boot_dir
 		dname=`dirname $initrd_image`
@@ -246,7 +251,7 @@ while (($# > 0)); do
 	    ;;
 	-M) read_arg map_file "$@" || shift $?
 	    ;;
-	-A) host_only=0;;
+	-A) dracut_args="${dracut_args} --no-host-only";;
 	-B) skip_update_bootloader=1;;
         -v|--verbose) dracut_args="${dracut_args} -v";;
 	-L) logfile=;;
@@ -263,7 +268,7 @@ while (($# > 0)); do
 	    dracut_cmdline="${dracut_cmdline} ip=$(ipconfig $static_if)":
 	    ;;
 	-a) read_arg acpi_dsdt "$@" || shift $?
-	    echo "mkinitrd: custom DSDT not yet supported"
+	    echo "Obsolete -a param, use acpi_table_dir= and acpi_override= variables in /etc/dracut.conf.d/"
 	    exit 1
 	    ;;
 	-s) read_arg boot_splash "$@" || shift $?
@@ -277,7 +282,6 @@ while (($# > 0)); do
         --version|-R)
             echo "mkinitrd: dracut compatibility wrapper"
             exit 0;;
-        --force) force=1;;
 	--quiet|-q) quiet=1;;
         *)  if [[ ! $targets ]]; then
             targets=$1
@@ -291,15 +295,18 @@ while (($# > 0)); do
 done
 
 [[ $targets && $kernels ]] || default_kernel_images
-[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage)
+if [[ ! $targets || ! $kernels ]];then
+    error "No kernel found in $boot_dir or bad modules dir in /lib/modules"
+    exit 1
+fi
 
 # We can have several targets/kernels, transform the list to an array
 targets=( $targets )
 [[ $kernels ]] && kernels=( $kernels )
 
 [[ $logfile ]]        && dracut_args="${dracut_args} --logfile $logfile"
-[[ $host_only == 1 ]] && dracut_args="${dracut_args} --hostonly"
-[[ $force == 1 ]]     && dracut_args="${dracut_args} --force"
+dracut_args="${dracut_args} --force"
+
 [[ $dracut_cmdline ]] && dracut_args="${dracut_args} --kernel-cmdline ${dracut_cmdline}"
 [ -z "$(type -p update-bootloader)" ] && skip_update_bootloader=1
 
@@ -308,11 +315,11 @@ if [ -f /etc/sysconfig/kernel ] ; then
     . /etc/sysconfig/kernel
 fi
 [[ $module_list ]] || module_list="${INITRD_MODULES}"
-basicmodules="$basicmodules ${module_list}"
 [[ $domu_module_list ]] || domu_module_list="${DOMU_INITRD_MODULES}"
-[[ $acpi_dsdt ]] || acpi_dsdt="${ACPI_DSDT}"
+shopt -s extglob
+
+failed=""
 
-echo "Creating: target|kernel|dracut args|basicmodules "
 for ((i=0 ; $i<${#targets[@]} ; i++)); do
 
     if [[ $img_vers ]];then
@@ -322,28 +329,38 @@ for ((i=0 ; $i<${#targets[@]} ; i++)); do
     fi
     kernel="${kernels[$i]}"
 
+    if is_xen_kernel $kernel $rootfs ; then
+	modules_all="${module_list} ${domu_module_list}"
+    else
+        modules_all="${module_list}"
+    fi
+
+    # Remove leading and trailing spaces needs (set above): shopt -s extglob
+    modules_all=${modules_all%%+([[:space:]])}
+    modules_all=${modules_all##+([[:space:]])}
+
+    echo "Creating initrd: $target"
+
     # Duplicate code: No way found how to redirect output based on $quiet
     if [[ $quiet == 1 ]];then
-	echo "$target|$kernel|$dracut_args|$basicmodules"
-	if is_xen_kernel $kernel $rootfs ; then
-	    basicmodules="$basicmodules ${domu_module_list}"
-	fi
-	if [[ $basicmodules ]]; then
-            $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \
-		"$kernel" &>/dev/null
-	else
+        # Duplicate code: --force-drivers must not be called with empty string
+        # -> dracut bug workarounded ugly, because of complex whitespace
+        # expansion magics
+        if [ -n "${modules_all}" ];then
+            $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel" &>/dev/null
+            [ $? -ne 0 ] && failed="$failed $target"
+        else
             $dracut_cmd $dracut_args "$target" "$kernel" &>/dev/null
-	fi
+            [ $? -ne 0 ] && failed="$failed $target"
+        fi
     else
-	if is_xen_kernel $kernel $rootfs ; then
-	    basicmodules="$basicmodules ${domu_module_list}"
-	fi
-	if [[ $basicmodules ]]; then
-            $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \
-		"$kernel"
-	else
+        if [ -n "${modules_all}" ];then
+            $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel"
+            [ $? -ne 0 ] && failed="$failed $target"
+        else
             $dracut_cmd $dracut_args "$target" "$kernel"
-	fi
+            [ $? -ne 0 ] && failed="$failed $target"
+        fi
     fi
 done
 
@@ -351,4 +368,12 @@ if [ "$skip_update_bootloader" ] ; then
     echo 2>&1 "Did not refresh the bootloader. You might need to refresh it manually."
 else
     update-bootloader --refresh
+    [ $? -ne 0 ] && echo "Updating bootloader failed" && exit 1
 fi
+
+if [ "$failed" != "" ]; then
+    echo "Generating $failed targets failed"
+    exit 1
+fi
+
+exit 0

mkinitrd.8.asc

@@ -3,6 +3,7 @@ MKINITRD(8)
 :doctype: manpage
 :man source:   dracut
 :man manual:   dracut
+:man version:  {version}
 
 NAME
 ----

modules.d/00bash/module-setup.sh

@@ -1,10 +1,8 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
-    [ -x /bin/bash ]
+    require_binaries /bin/bash
 }
 
 # called by dracut

modules.d/00bootchart/module-setup.sh

@@ -1,11 +1,9 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
-    [ -x /sbin/bootchartd ] || return 1
+    require_binaries /sbin/bootchartd || return 1
     return 255
 }
 

modules.d/00dash/module-setup.sh

@@ -1,10 +1,8 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
-    [ -x /bin/dash ]
+    require_binaries /bin/dash
 }
 
 # called by dracut

modules.d/00mksh/module-setup.sh

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    require_binaries /bin/mksh
+}
+
+# called by dracut
+depends() {
+    return 0
+}
+
+# called by dracut
+install() {
+    # If another shell is already installed, do not use mksh
+    [[ -x $initdir/bin/sh ]] && return
+
+    # Prefer mksh as /bin/sh if it is available.
+    inst /bin/mksh && ln -sf mksh "${initdir}/bin/sh"
+}
+

modules.d/00systemd-bootchart/module-setup.sh

@@ -1,21 +0,0 @@
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# called by dracut
-check() {
-    [[ "$mount_needs" ]] && return 1
-    [ -x $systemdutildir/systemd-bootchart ] || return 1
-    return 255
-}
-
-# called by dracut
-depends() {
-    return 0
-}
-
-# called by dracut
-install() {
-    inst_symlink /init /sbin/init
-    inst_multiple $systemdutildir/systemd-bootchart
-}

modules.d/00systemd/module-setup.sh

@@ -1,12 +1,21 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+getSystemdVersion() {
+    [ -z "$SYSTEMD_VERSION" ] && SYSTEMD_VERSION=$($systemdutildir/systemd --version | { read a b a; echo $b; })
+    # Check if the systemd version is a valid number
+    if ! [[ $SYSTEMD_VERSION =~ ^[0-9]+$ ]]; then
+        dfatal "systemd version is not a number ($SYSTEMD_VERSION)"
+        exit 1
+    fi
+
+    echo $SYSTEMD_VERSION
+}
 
 # called by dracut
 check() {
     [[ $mount_needs ]] && return 1
-    if [[ -x $systemdutildir/systemd ]]; then
-        SYSTEMD_VERSION=$($systemdutildir/systemd --version | { read a b a; echo $b; })
+    if require_binaries $systemdutildir/systemd; then
+        SYSTEMD_VERSION=$(getSystemdVersion)
         (( $SYSTEMD_VERSION >= 198 )) && return 0
        return 255
     fi
@@ -20,7 +29,8 @@ depends() {
 }
 
 installkernel() {
-    instmods autofs4 ipv6
+    hostonly='' instmods autofs4 ipv6 algif_hash hmac sha256
+    instmods -s efivarfs
 }
 
 # called by dracut
@@ -32,8 +42,15 @@ install() {
         exit 1
     fi
 
+    if [ $(getSystemdVersion) -ge 240 ]; then
+    inst_multiple -o \
+        $systemdutildir/system-generators/systemd-debug-generator \
+        $systemdsystemunitdir/debug-shell.service
+    fi
+
     inst_multiple -o \
         $systemdutildir/systemd \
+        $systemdutildir/systemd-coredump \
         $systemdutildir/systemd-cgroups-agent \
         $systemdutildir/systemd-shutdown \
         $systemdutildir/systemd-reply-password \
@@ -43,21 +60,26 @@ install() {
         $systemdutildir/systemd-sysctl \
         $systemdutildir/systemd-modules-load \
         $systemdutildir/systemd-vconsole-setup \
+        $systemdutildir/systemd-volatile-root \
         $systemdutildir/system-generators/systemd-fstab-generator \
+        $systemdutildir/system-generators/systemd-gpt-auto-generator \
+        \
         $systemdsystemunitdir/cryptsetup.target \
+        $systemdsystemunitdir/cryptsetup-pre.target \
+        $systemdsystemunitdir/remote-cryptsetup.target \
         $systemdsystemunitdir/emergency.target \
         $systemdsystemunitdir/sysinit.target \
         $systemdsystemunitdir/basic.target \
         $systemdsystemunitdir/halt.target \
         $systemdsystemunitdir/kexec.target \
-        $systemdsystemunitdir/initrd.target \
-        $systemdsystemunitdir/initrd-fs.target \
-        $systemdsystemunitdir/initrd-root-fs.target \
         $systemdsystemunitdir/local-fs.target \
         $systemdsystemunitdir/local-fs-pre.target \
         $systemdsystemunitdir/remote-fs.target \
         $systemdsystemunitdir/remote-fs-pre.target \
+        $systemdsystemunitdir/multi-user.target \
         $systemdsystemunitdir/network.target \
+        $systemdsystemunitdir/network-pre.target \
+        $systemdsystemunitdir/network-online.target \
         $systemdsystemunitdir/nss-lookup.target \
         $systemdsystemunitdir/nss-user-lookup.target \
         $systemdsystemunitdir/poweroff.target \
@@ -72,13 +94,18 @@ install() {
         $systemdsystemunitdir/timers.target \
         $systemdsystemunitdir/paths.target \
         $systemdsystemunitdir/umount.target \
+        \
+        $systemdsystemunitdir/sys-kernel-config.mount \
+        \
         $systemdsystemunitdir/kmod-static-nodes.service \
+        $systemdsystemunitdir/systemd-tmpfiles-setup.service \
         $systemdsystemunitdir/systemd-tmpfiles-setup-dev.service \
         $systemdsystemunitdir/systemd-ask-password-console.path \
         $systemdsystemunitdir/systemd-udevd-control.socket \
         $systemdsystemunitdir/systemd-udevd-kernel.socket \
         $systemdsystemunitdir/systemd-ask-password-plymouth.path \
         $systemdsystemunitdir/systemd-journald.socket \
+        $systemdsystemunitdir/systemd-journald-audit.socket \
         $systemdsystemunitdir/systemd-ask-password-console.service \
         $systemdsystemunitdir/systemd-modules-load.service \
         $systemdsystemunitdir/systemd-halt.service \
@@ -92,7 +119,10 @@ install() {
         $systemdsystemunitdir/systemd-ask-password-plymouth.service \
         $systemdsystemunitdir/systemd-journald.service \
         $systemdsystemunitdir/systemd-vconsole-setup.service \
+        $systemdsystemunitdir/systemd-volatile-root.service \
         $systemdsystemunitdir/systemd-random-seed-load.service \
+        $systemdsystemunitdir/systemd-random-seed.service \
+        $systemdsystemunitdir/systemd-sysctl.service \
         \
         $systemdsystemunitdir/sysinit.target.wants/systemd-modules-load.service \
         $systemdsystemunitdir/sysinit.target.wants/systemd-ask-password-console.path \
@@ -100,23 +130,35 @@ install() {
         $systemdsystemunitdir/sockets.target.wants/systemd-udevd-control.socket \
         $systemdsystemunitdir/sockets.target.wants/systemd-udevd-kernel.socket \
         $systemdsystemunitdir/sockets.target.wants/systemd-journald.socket \
+        $systemdsystemunitdir/sockets.target.wants/systemd-journald-audit.socket \
+        $systemdsystemunitdir/sockets.target.wants/systemd-journald-dev-log.socket \
         $systemdsystemunitdir/sysinit.target.wants/systemd-udevd.service \
         $systemdsystemunitdir/sysinit.target.wants/systemd-udev-trigger.service \
         $systemdsystemunitdir/sysinit.target.wants/kmod-static-nodes.service \
+        $systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup.service \
         $systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup-dev.service \
+        $systemdsystemunitdir/sysinit.target.wants/systemd-sysctl.service \
         \
         $systemdsystemunitdir/ctrl-alt-del.target \
+        $systemdsystemunitdir/reboot.target \
+        $systemdsystemunitdir/systemd-reboot.service \
         $systemdsystemunitdir/syslog.socket \
-        $systemdsystemunitdir/initrd-switch-root.target \
-        $systemdsystemunitdir/initrd-switch-root.service \
-        $systemdsystemunitdir/initrd-cleanup.service \
-        $systemdsystemunitdir/initrd-udevadm-cleanup-db.service \
-        $systemdsystemunitdir/initrd-parse-etc.service \
         \
         $systemdsystemunitdir/slices.target \
         $systemdsystemunitdir/system.slice \
+        $systemdsystemunitdir/-.slice \
         \
-        journalctl systemctl echo swapoff systemd-cgls systemd-tmpfiles
+        $tmpfilesdir/systemd.conf \
+        \
+        journalctl systemctl \
+        echo swapoff \
+        kmod insmod rmmod modprobe modinfo depmod lsmod \
+        mount umount reboot poweroff \
+        systemd-run systemd-escape \
+        systemd-cgls systemd-tmpfiles \
+        systemd-ask-password systemd-tty-ask-password-agent \
+        /etc/udev/udev.hwdb \
+        ${NULL}
 
     inst_multiple -o \
         /usr/lib/modules-load.d/*.conf \
@@ -124,9 +166,9 @@ install() {
 
     modules_load_get() {
         local _line i
-        for i in "$1"/*.conf; do
+        for i in "$dracutsysrootdir$1"/*.conf; do
             [[ -f $i ]] || continue
-            while read _line; do
+            while read _line || [ -n "$_line" ]; do
                 case $_line in
                     \#*)
                         ;;
@@ -140,22 +182,27 @@ install() {
     }
 
     _mods=$(modules_load_get /usr/lib/modules-load.d)
-    [[ $_mods ]] && instmods $_mods
+    [[ $_mods ]] && hostonly='' instmods $_mods
 
     if [[ $hostonly ]]; then
-        inst_multiple -o \
+        inst_multiple -H -o \
             /etc/systemd/journald.conf \
+            /etc/systemd/journald.conf.d/*.conf \
             /etc/systemd/system.conf \
+            /etc/systemd/system.conf.d/*.conf \
             /etc/hostname \
             /etc/machine-id \
+            /etc/machine-info \
             /etc/vconsole.conf \
             /etc/locale.conf \
             /etc/modules-load.d/*.conf \
             /etc/sysctl.d/*.conf \
-            /etc/sysctl.conf
+            /etc/sysctl.conf \
+            /etc/udev/udev.conf \
+            ${NULL}
 
         _mods=$(modules_load_get /etc/modules-load.d)
-        [[ $_mods ]] && instmods $_mods
+        [[ $_mods ]] && hostonly='' instmods $_mods
     fi
 
     if ! [[ -e "$initdir/etc/machine-id" ]]; then
@@ -164,67 +211,50 @@ install() {
 
     # install adm user/group for journald
     inst_multiple nologin
-    egrep '^systemd-journal:' "$initdir/etc/passwd" 2>/dev/null >> "$initdir/etc/passwd"
-    egrep '^systemd-journal:' /etc/group >> "$initdir/etc/group"
+    grep '^systemd-journal:' $dracutsysrootdir/etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    grep '^adm:' $dracutsysrootdir/etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    grep '^systemd-journal:' $dracutsysrootdir/etc/group >> "$initdir/etc/group"
+    grep '^wheel:' $dracutsysrootdir/etc/group >> "$initdir/etc/group"
+    grep '^adm:' $dracutsysrootdir/etc/group >> "$initdir/etc/group"
+    grep '^utmp:' $dracutsysrootdir/etc/group >> "$initdir/etc/group"
+    grep '^root:' $dracutsysrootdir/etc/group >> "$initdir/etc/group"
+
+    # we don't use systemd-networkd, but the user is in systemd.conf tmpfiles snippet
+    grep '^systemd-network:' $dracutsysrootdir/etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    grep '^systemd-network:' $dracutsysrootdir/etc/group >> "$initdir/etc/group"
 
     ln_r $systemdutildir/systemd "/init"
     ln_r $systemdutildir/systemd "/sbin/init"
 
-    inst_script "$moddir/dracut-emergency.sh" /bin/dracut-emergency
-    inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/emergency.service
-    inst_simple "$moddir/dracut-emergency.service" ${systemdsystemunitdir}/dracut-emergency.service
-    inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/rescue.service
-
-    ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target"
-
-    inst_script "$moddir/dracut-cmdline.sh" /bin/dracut-cmdline
-    inst_script "$moddir/dracut-pre-udev.sh" /bin/dracut-pre-udev
-    inst_script "$moddir/dracut-pre-trigger.sh" /bin/dracut-pre-trigger
-    inst_script "$moddir/dracut-initqueue.sh" /bin/dracut-initqueue
-    inst_script "$moddir/dracut-pre-mount.sh" /bin/dracut-pre-mount
-    inst_script "$moddir/dracut-mount.sh" /bin/dracut-mount
-    inst_script "$moddir/dracut-pre-pivot.sh" /bin/dracut-pre-pivot
-
-    inst_script "$moddir/rootfs-generator.sh" /lib/systemd/system-generators/dracut-rootfs-generator
-
     inst_binary true
     ln_r $(type -P true) "/usr/bin/loginctl"
     ln_r $(type -P true) "/bin/loginctl"
-    inst_rules 71-seat.rules 73-seat-late.rules 99-systemd.rules
+    inst_rules \
+        70-uaccess.rules \
+        71-seat.rules \
+        73-seat-late.rules \
+        90-vconsole.rules \
+        99-systemd.rules \
+        ${NULL}
 
     for i in \
         emergency.target \
-        dracut-emergency.service \
-        rescue.service \
+        rescue.target \
         systemd-ask-password-console.service \
         systemd-ask-password-plymouth.service \
         ; do
-        mkdir -p "${initdir}${systemdsystemunitdir}/${i}.wants"
-        ln_r "${systemdsystemunitdir}/systemd-vconsole-setup.service" \
-            "${systemdsystemunitdir}/${i}.wants/systemd-vconsole-setup.service"
-    done
-
-    mkdir -p "${initdir}/$systemdsystemunitdir/initrd.target.wants"
-    for i in \
-        dracut-cmdline.service \
-        dracut-initqueue.service \
-        dracut-mount.service \
-        dracut-pre-mount.service \
-        dracut-pre-pivot.service \
-        dracut-pre-trigger.service \
-        dracut-pre-udev.service \
-        ; do
-        inst_simple "$moddir/${i}" "$systemdsystemunitdir/${i}"
-        ln_r "$systemdsystemunitdir/${i}" "$systemdsystemunitdir/initrd.target.wants/${i}"
+        [[ -f $systemdsystemunitdir/$i ]] || continue
+        systemctl -q --root "$initdir" add-wants "$i" systemd-vconsole-setup.service
     done
 
     mkdir -p "$initdir/etc/systemd"
-    # turn off RateLimit for journal
+    # We must use a volatile journal, and we don't want rate-limiting
     {
         echo "[Journal]"
+        echo "Storage=volatile"
         echo "RateLimitInterval=0"
         echo "RateLimitBurst=0"
     } >> "$initdir/etc/systemd/journald.conf"
 
+    systemctl -q --root "$initdir" set-default multi-user.target
 }
-

modules.d/00warpclock/module-setup.sh

@@ -0,0 +1,29 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+# called by dracut
+check() {
+    # hwclock does not exist on S390(x), bail out silently then
+    local _arch=${DRACUT_ARCH:-$(uname -m)}
+    [ "$_arch" = "s390" -o "$_arch" = "s390x" ] && return 1
+
+    [ -e /etc/localtime -a -e /etc/adjtime ] || return 1
+    require_binaries /sbin/hwclock || return 1
+
+    return 255
+}
+
+# called by dracut
+depends() {
+    return 0
+}
+
+# called by dracut
+install() {
+    inst /usr/share/zoneinfo/UTC
+    inst /etc/localtime
+    inst /etc/adjtime
+    inst_hook pre-trigger 00 "$moddir/warpclock.sh"
+    inst /sbin/hwclock
+}

modules.d/00warpclock/warpclock.sh

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+if test -e /etc/adjtime ; then
+    while read line ; do
+	if test "$line" = LOCAL ; then
+	    hwclock --systz
+	fi
+    done < /etc/adjtime
+fi

modules.d/01fips/fips-boot.sh

@@ -1,9 +1,9 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
-if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
+if ! fipsmode=$(getarg fips) || [ "$fipsmode" = "0" ]; then
     rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
+elif [ -z "$fipsmode" ]; then
+    die "FIPS mode have to be enabled by 'fips=1' not just 'fips'"
 elif getarg boot= >/dev/null; then
     . /sbin/fips.sh
     if mount_boot; then

modules.d/01fips/fips-load-crypto.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
+    rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
+else
+    . /sbin/fips.sh
+    fips_load_crypto || die "FIPS integrity test failed"
+fi

modules.d/01fips/fips-noboot.sh

@@ -1,9 +1,9 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
-if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
+if ! fipsmode=$(getarg fips) || [ "$fipsmode" = "0" ]; then
     rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
+elif [ -z "$fipsmode" ]; then
+    die "FIPS mode have to be enabled by 'fips=1' not just 'fips'"
 elif ! [ -f /tmp/fipsdone ]; then
     . /sbin/fips.sh
     mount_boot

modules.d/01fips/fips.sh

@@ -1,6 +1,16 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+# systemd lets stdout go to journal only, but the system
+# has to halt when the integrity check fails to satisfy FIPS.
+if [ -z "$DRACUT_SYSTEMD" ]; then
+    fips_info() {
+        info "$*"
+    }
+else
+    fips_info() {
+        echo "$*" >&2
+    }
+fi
 
 mount_boot()
 {
@@ -47,7 +57,7 @@ mount_boot()
         [ -e "$boot" ] || return 1
 
         mkdir /boot
-        info "Mounting $boot as /boot"
+        fips_info "Mounting $boot as /boot"
         mount -oro "$boot" /boot || return 1
     elif [ -d "$NEWROOT/boot" ]; then
         rm -fr -- /boot
@@ -61,16 +71,52 @@ do_rhevh_check()
     kpath=${1}
 
     # If we're on RHEV-H, the kernel is in /run/initramfs/live/vmlinuz0
-    HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b; do printf "%s\n" $a; done)
-    HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b; do printf "%s\n" $a; done || return 1)
+    HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done)
+    HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done || return 1)
     if [ -z "$HMAC_SUM_ORIG" ] || [ -z "$HMAC_SUM_CALC" ] || [ "${HMAC_SUM_ORIG}" != "${HMAC_SUM_CALC}" ]; then
         warn "HMAC sum mismatch"
         return 1
     fi
-    info "rhevh_check OK"
+    fips_info "rhevh_check OK"
     return 0
 }
 
+nonfatal_modprobe()
+{
+    modprobe $1 2>&1 > /dev/stdout |
+        while read -r line || [ -n "$line" ]; do
+            echo "${line#modprobe: FATAL: }" >&2
+        done
+}
+
+fips_load_crypto()
+{
+    FIPSMODULES=$(cat /etc/fipsmodules)
+
+    fips_info "Loading and integrity checking all crypto modules"
+    mv /etc/modprobe.d/fips.conf /etc/modprobe.d/fips.conf.bak
+    for _module in $FIPSMODULES; do
+        if [ "$_module" != "tcrypt" ]; then
+            if ! nonfatal_modprobe "${_module}" 2>/tmp/fips.modprobe_err; then
+                # check if kernel provides generic algo
+                _found=0
+                while read _k _s _v || [ -n "$_k" ]; do
+                    [ "$_k" != "name" -a "$_k" != "driver" ] && continue
+                    [ "$_v" != "$_module" ] && continue
+                    _found=1
+                    break
+                done </proc/crypto
+                [ "$_found" = "0" ] && cat /tmp/fips.modprobe_err >&2 && return 1
+            fi
+        fi
+    done
+    mv /etc/modprobe.d/fips.conf.bak /etc/modprobe.d/fips.conf
+
+    fips_info "Self testing crypto algorithms"
+    modprobe tcrypt || return 1
+    rmmod tcrypt
+}
+
 do_fips()
 {
     local _v
@@ -80,46 +126,46 @@ do_fips()
 
     KERNEL=$(uname -r)
 
-    if ! [ -e "/boot/.vmlinuz-${KERNEL}.hmac" ]; then
-        warn "/boot/.vmlinuz-${KERNEL}.hmac does not exist"
-        return 1
-    fi
-
-    FIPSMODULES=$(cat /etc/fipsmodules)
-
-    info "Loading and integrity checking all crypto modules"
-    mv /etc/modprobe.d/fips.conf /etc/modprobe.d/fips.conf.bak
-    for _module in $FIPSMODULES; do
-        if [ "$_module" != "tcrypt" ]; then
-            if ! modprobe "${_module}"; then
-                # check if kernel provides generic algo
-                _found=0
-                while read _k _s _v; do
-                    [ "$_k" != "name" -a "$_k" != "driver" ] && continue
-                    [ "$_v" != "$_module" ] && continue
-                    _found=1
-                    break
-                done </proc/crypto
-                [ "$_found" = "0" ] && return 1
-            fi
-        fi
-    done
-    mv /etc/modprobe.d/fips.conf.bak /etc/modprobe.d/fips.conf
-
-    info "Self testing crypto algorithms"
-    modprobe tcrypt || return 1
-    rmmod tcrypt
-
-    info "Checking integrity of kernel"
+    fips_info "Checking integrity of kernel"
     if [ -e "/run/initramfs/live/vmlinuz0" ]; then
         do_rhevh_check /run/initramfs/live/vmlinuz0 || return 1
     elif [ -e "/run/initramfs/live/isolinux/vmlinuz0" ]; then
         do_rhevh_check /run/initramfs/live/isolinux/vmlinuz0 || return 1
+    elif [ -e "/run/install/repo/images/pxeboot/vmlinuz" ]; then
+        # This is a boot.iso with the .hmac inside the install.img
+        do_rhevh_check /run/install/repo/images/pxeboot/vmlinuz || return 1
     else
-        sha512hmac -c "/boot/.vmlinuz-${KERNEL}.hmac" || return 1
+        BOOT_IMAGE="$(getarg BOOT_IMAGE)"
+
+        # Trim off any leading GRUB boot device (e.g. ($root) )
+        BOOT_IMAGE="$(echo "${BOOT_IMAGE}" | sed 's/^(.*)//')"
+
+        BOOT_IMAGE_NAME="${BOOT_IMAGE##*/}"
+        BOOT_IMAGE_PATH="${BOOT_IMAGE%${BOOT_IMAGE_NAME}}"
+
+        if [ -z "$BOOT_IMAGE_NAME" ]; then
+            BOOT_IMAGE_NAME="vmlinuz-${KERNEL}"
+        elif ! [ -e "/boot/${BOOT_IMAGE_PATH}/${BOOT_IMAGE_NAME}" ]; then
+            #if /boot is not a separate partition BOOT_IMAGE might start with /boot
+            BOOT_IMAGE_PATH=${BOOT_IMAGE_PATH#"/boot"}
+            #on some achitectures BOOT_IMAGE does not contain path to kernel
+            #so if we can't find anything, let's treat it in the same way as if it was empty
+            if ! [ -e "/boot/${BOOT_IMAGE_PATH}/${BOOT_IMAGE_NAME}" ]; then
+                BOOT_IMAGE_NAME="vmlinuz-${KERNEL}"
+                BOOT_IMAGE_PATH=""
+            fi
+        fi
+
+        BOOT_IMAGE_HMAC="/boot/${BOOT_IMAGE_PATH}/.${BOOT_IMAGE_NAME}.hmac"
+        if ! [ -e "${BOOT_IMAGE_HMAC}" ]; then
+            warn "${BOOT_IMAGE_HMAC} does not exist"
+            return 1
+        fi
+
+        (cd "${BOOT_IMAGE_HMAC%/*}" && sha512hmac -c "${BOOT_IMAGE_HMAC}") || return 1
     fi
 
-    info "All initrd crypto checks done"
+    fips_info "All initrd crypto checks done"
 
     > /tmp/fipsdone
 

modules.d/01fips/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
@@ -14,12 +12,32 @@ depends() {
 
 # called by dracut
 installkernel() {
-    local _fipsmodules _mod
-    _fipsmodules="aead aes_generic aes-x86_64 ansi_cprng arc4 blowfish camellia cast6 cbc ccm "
-    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod "
-    _fipsmodules+="ecb eseqiv fcrypt gcm ghash_generic hmac khazad lzo md4 md5 michael_mic rmd128 "
-    _fipsmodules+="rmd160 rmd256 rmd320 rot13 salsa20 seed seqiv serpent sha1 sha224 sha256 sha256_generic "
-    _fipsmodules+="sha384 sha512 sha512_generic tcrypt tea tnepres twofish wp256 wp384 wp512 xeta xtea xts zlib"
+    local _fipsmodules _mod _bootfstype
+    if [[ -f "${srcmods}/modules.fips" ]]; then
+        _fipsmodules="$(cat "${srcmods}/modules.fips")"
+    else
+        _fipsmodules=""
+
+        # Hashes:
+        _fipsmodules+="sha1 sha224 sha256 sha384 sha512 "
+        _fipsmodules+="sha3-224 sha3-256 sha3-384 sha3-512 "
+        _fipsmodules+="crc32c crct10dif ghash "
+
+        # Ciphers:
+        _fipsmodules+="cipher_null des3_ede aes cfb "
+
+        # Modes/templates:
+        _fipsmodules+="ecb cbc ctr xts gcm ccm authenc hmac cmac ofb cts "
+
+        # Compression algs:
+        _fipsmodules+="deflate lzo zlib "
+
+        # PRNG algs:
+        _fipsmodules+="ansi_cprng "
+
+        # Misc:
+        _fipsmodules+="aead cryptomgr tcrypt crypto_user "
+    fi
 
     mkdir -m 0755 -p "${initdir}/etc/modprobe.d"
 
@@ -29,22 +47,39 @@ installkernel() {
             echo "blacklist $_mod" >> "${initdir}/etc/modprobe.d/fips.conf"
         fi
     done
+
+    # with hostonly_default_device fs module for /boot is not installed by default
+    if [[ $hostonly ]] && [[ "$hostonly_default_device" == "no" ]]; then
+        _bootfstype=$(find_mp_fstype /boot)
+        if [[ -n "$_bootfstype" ]]; then
+            hostonly='' instmods $_bootfstype
+        else
+            dwarning "Can't determine fs type for /boot, FIPS check may fail."
+        fi
+    fi
 }
 
 # called by dracut
 install() {
     local _dir
-    inst_hook pre-trigger 01 "$moddir/fips-boot.sh"
+    inst_hook pre-mount 01 "$moddir/fips-boot.sh"
     inst_hook pre-pivot 01 "$moddir/fips-noboot.sh"
+    inst_hook pre-udev 01 "$moddir/fips-load-crypto.sh"
     inst_script "$moddir/fips.sh" /sbin/fips.sh
 
-    inst_multiple sha512hmac rmmod insmod mount uname umount fipscheck
+    inst_multiple sha512hmac rmmod insmod mount uname umount
 
-    inst_libdir_file libsoftokn3.so libsoftokn3.so \
-        libsoftokn3.chk libfreebl3.so libfreebl3.chk \
-        libssl.so 'hmaccalc/sha512hmac.hmac' libssl.so.10
-
-    inst_multiple -o prelink
     inst_simple /etc/system-fips
+    [ -c ${initdir}/dev/random ] || mknod ${initdir}/dev/random c 1 8 \
+        || {
+            dfatal "Cannot create /dev/random"
+            dfatal "To create an initramfs with fips support, dracut has to run as root"
+            return 1
+        }
+    [ -c ${initdir}/dev/urandom ] || mknod ${initdir}/dev/urandom c 1 9 \
+        || {
+            dfatal "Cannot create /dev/random"
+            dfatal "To create an initramfs with fips support, dracut has to run as root"
+            return 1
+        }
 }
-

modules.d/01systemd-initrd/module-setup.sh

@@ -0,0 +1,40 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    [[ $mount_needs ]] && return 1
+
+    if ! dracut_module_included "systemd"; then
+        derror "systemd-initrd needs systemd in the initramfs"
+        return 1
+    fi
+
+    return 0
+}
+
+# called by dracut
+depends() {
+    echo "systemd"
+}
+
+installkernel() {
+    return 0
+}
+
+# called by dracut
+install() {
+    local _mods
+
+    inst_multiple -o \
+        $systemdsystemunitdir/initrd.target \
+        $systemdsystemunitdir/initrd-fs.target \
+        $systemdsystemunitdir/initrd-root-device.target \
+        $systemdsystemunitdir/initrd-root-fs.target \
+        $systemdsystemunitdir/initrd-switch-root.target \
+        $systemdsystemunitdir/initrd-switch-root.service \
+        $systemdsystemunitdir/initrd-cleanup.service \
+        $systemdsystemunitdir/initrd-udevadm-cleanup-db.service \
+        $systemdsystemunitdir/initrd-parse-etc.service
+
+    systemctl -q --root "$initdir" set-default initrd.target
+}

modules.d/02caps/caps.sh

@@ -1,12 +1,10 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 capsmode=$(getarg rd.caps)
 
 if [ "$capsmode" = "1" ]; then
     CAPS_INIT_DROP=$(getarg rd.caps.initdrop=)
-    CAPS_USERMODEHELPER_BSET=$(capsh --drop="$CAPS_INIT_DROP" -- -c 'while read a b ; do [ "$a" = "CapBnd:" ] && echo $((0x${b:$((${#b}-8)):8})) $((0x${b:$((${#b}-16)):8})) && break; done < /proc/self/status')
+    CAPS_USERMODEHELPER_BSET=$(capsh --drop="$CAPS_INIT_DROP" -- -c 'while read a b  || [ -n "$a" ]; do [ "$a" = "CapBnd:" ] && echo $((0x${b:$((${#b}-8)):8})) $((0x${b:$((${#b}-16)):8})) && break; done < /proc/self/status')
     CAPS_MODULES_DISABLED=$(getarg rd.caps.disablemodules=)
     CAPS_KEXEC_DISABLED=$(getarg rd.caps.disablekexec=)
 

modules.d/02caps/module-setup.sh

@@ -1,10 +1,9 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
-    type -P capsh >/dev/null 2>&1
+    require_binaries capsh
+    return 255
 }
 
 # called by dracut
@@ -14,9 +13,13 @@ depends() {
 
 # called by dracut
 install() {
-    inst_hook pre-pivot 00 "$moddir/caps.sh"
-    inst $(type -P capsh 2>/dev/null) /usr/sbin/capsh
-    # capsh wants bash and we need bash also
-    inst /bin/bash
+    if ! dracut_module_included "systemd"; then
+        inst_hook pre-pivot 00 "$moddir/caps.sh"
+        inst $(type -P capsh 2>/dev/null) /usr/sbin/capsh
+        # capsh wants bash and we need bash also
+        inst /bin/bash
+    else
+        dwarning "caps: does not work with systemd in the initramfs"
+    fi
 }
 

modules.d/02fips-aesni/module-setup.sh

@@ -1,34 +0,0 @@
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# called by dracut
-check() {
-    return 255
-}
-
-# called by dracut
-depends() {
-    return 0
-}
-
-# called by dracut
-installkernel() {
-    local _fipsmodules _mod
-    _fipsmodules="aesni-intel ghash_clmulni_intel"
-
-    mkdir -m 0755 -p "${initdir}/etc/modprobe.d"
-
-    for _mod in $_fipsmodules; do
-        if instmods $_mod; then
-            echo $_mod >> "${initdir}/etc/fipsmodules"
-            echo "blacklist $_mod" >> "${initdir}/etc/modprobe.d/fips.conf"
-        fi
-    done
-}
-
-# called by dracut
-install() {
-    return 0
-}
-

modules.d/02systemd-networkd/module-setup.sh

@@ -0,0 +1,71 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    [[ $mount_needs ]] && return 1
+
+    if ! dracut_module_included "systemd"; then
+        derror "systemd-networkd needs systemd in the initramfs"
+        return 1
+    fi
+
+    return 255
+}
+
+# called by dracut
+depends() {
+    echo "systemd kernel-network-modules"
+}
+
+installkernel() {
+    return 0
+}
+
+# called by dracut
+install() {
+    inst_multiple -o \
+        $systemdutildir/systemd-networkd \
+        $systemdutildir/systemd-networkd-wait-online \
+        $systemdsystemunitdir/systemd-networkd-wait-online.service \
+        $systemdsystemunitdir/systemd-networkd.service \
+        $systemdsystemunitdir/systemd-networkd.socket \
+        $systemdutildir/network/99-default.link \
+        networkctl ip
+
+        #hostnamectl timedatectl
+        # $systemdutildir/systemd-timesyncd \
+        # $systemdutildir/systemd-timedated \
+        # $systemdutildir/systemd-hostnamed \
+        # $systemdutildir/systemd-resolvd \
+        # $systemdutildir/systemd-resolve-host \
+        # $systemdsystemunitdir/systemd-resolved.service \
+        # $systemdsystemunitdir/systemd-hostnamed.service \
+        # $systemdsystemunitdir/systemd-timesyncd.service \
+        # $systemdsystemunitdir/systemd-timedated.service \
+        # $systemdsystemunitdir/time-sync.target \
+        # /etc/systemd/resolved.conf \
+
+
+    # inst_dir /var/lib/systemd/clock
+
+    grep '^systemd-network:' $dracutsysrootdir/etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    grep '^systemd-network:' $dracutsysrootdir/etc/group >> "$initdir/etc/group"
+    # grep '^systemd-timesync:' $dracutsysrootdir/etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    # grep '^systemd-timesync:' $dracutsysrootdir/etc/group >> "$initdir/etc/group"
+
+    _arch=${DRACUT_ARCH:-$(uname -m)}
+    inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_myhostname.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_resolve.so.*"
+
+    for i in \
+        systemd-networkd-wait-online.service \
+        systemd-networkd.service \
+        systemd-networkd.socket
+#       systemd-timesyncd.service
+    do
+        systemctl -q --root "$initdir" enable "$i"
+    done
+}
+

modules.d/03modsign/load-modsign-keys.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Licensed under the GPLv2
 #

modules.d/03modsign/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Licensed under the GPLv2
 #
@@ -9,13 +7,13 @@
 
 # called by dracut
 check() {
-    [[ -x /usr/bin/keyctl ]] || return 1
+    require_binaries keyctl || return 1
 
     # do not include module in hostonly mode,
     # if no keys are present
     if [[ $hostonly ]]; then
-        x=$(echo /lib/modules/keys/*)
-        [[ "${x}" = "/lib/modules/keys/*" ]] && return 255
+        x=$(echo $dracutsysrootdir/lib/modules/keys/*)
+        [[ "${x}" = "$dracutsysrootdir/lib/modules/keys/*" ]] && return 255
     fi
 
     return 0
@@ -29,12 +27,12 @@ depends() {
 # called by dracut
 install() {
     inst_dir /lib/modules/keys
-    inst_binary /usr/bin/keyctl
+    inst_binary keyctl
 
     inst_hook pre-trigger 01 "$moddir/load-modsign-keys.sh"
 
-    for x in /lib/modules/keys/* ; do
-        [[ "${x}" = "/lib/modules/keys/*" ]] && break
-        inst_simple "${x}"
+    for x in $dracutsysrootdir/lib/modules/keys/* ; do
+        [[ "${x}" = "$dracutsysrootdir/lib/modules/keys/*" ]] && break
+        inst_simple "${x#$dracutsysrootdir}"
     done
 }

modules.d/03rescue/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
@@ -17,6 +15,6 @@ depends() {
 install() {
     inst_multiple -o ps grep more cat rm strace free showmount \
         ping netstat rpcinfo vi scp ping6 ssh \
-        fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
+        fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.f2fs fsck.vfat e2fsck
 }
 

modules.d/04watchdog-modules/module-setup.sh

@@ -0,0 +1,38 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    return 255
+}
+
+# called by dracut
+depends() {
+    return 0
+}
+
+# called by dracut
+install() {
+    return 0
+}
+
+installkernel() {
+    local -A _drivers
+    local _alldrivers _wdtdrv _wdtppath _dir
+
+    for _wd in /sys/class/watchdog/*; do
+        ! [ -e $_wd ] && continue
+        _wdtdrv=$(get_dev_module $_wd)
+        if [[ $_wdtdrv ]]; then
+            instmods $_wdtdrv
+            for i in $_wdtdrv; do
+                _drivers[$i]=1
+            done
+        fi
+    done
+
+    # ensure that watchdog module is loaded as early as possible
+    _alldrivers="${!_drivers[*]}"
+    [[ $_alldrivers ]] && echo "rd.driver.pre=${_alldrivers// /,}" > ${initdir}/etc/cmdline.d/00-watchdog.conf
+
+    return 0
+}

modules.d/04watchdog/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
@@ -9,23 +7,27 @@ check() {
 
 # called by dracut
 depends() {
-    return 0
+    return "watchdog-modules"
 }
 
 # called by dracut
 install() {
-    inst_hook cmdline   00 "$moddir/watchdog.sh"
-    inst_hook cmdline   50 "$moddir/watchdog.sh"
-    inst_hook pre-trigger 00 "$moddir/watchdog.sh"
-    inst_hook initqueue 00 "$moddir/watchdog.sh"
-    inst_hook mount     00 "$moddir/watchdog.sh"
-    inst_hook mount     50 "$moddir/watchdog.sh"
-    inst_hook mount     99 "$moddir/watchdog.sh"
-    inst_hook pre-pivot 00 "$moddir/watchdog.sh"
-    inst_hook pre-pivot 99 "$moddir/watchdog.sh"
-    inst_hook cleanup   00 "$moddir/watchdog.sh"
-    inst_hook cleanup   99 "$moddir/watchdog.sh"
+    # Do not add watchdog hooks if systemd module is included
+    # In that case, systemd will manage watchdog kick
+    if ! dracut_module_included "systemd"; then
+        inst_hook cmdline   00 "$moddir/watchdog.sh"
+        inst_hook cmdline   50 "$moddir/watchdog.sh"
+        inst_hook pre-trigger 00 "$moddir/watchdog.sh"
+        inst_hook initqueue 00 "$moddir/watchdog.sh"
+        inst_hook mount     00 "$moddir/watchdog.sh"
+        inst_hook mount     50 "$moddir/watchdog.sh"
+        inst_hook mount     99 "$moddir/watchdog.sh"
+        inst_hook pre-pivot 00 "$moddir/watchdog.sh"
+        inst_hook pre-pivot 99 "$moddir/watchdog.sh"
+        inst_hook cleanup   00 "$moddir/watchdog.sh"
+        inst_hook cleanup   99 "$moddir/watchdog.sh"
+    fi
+
     inst_hook emergency 02 "$moddir/watchdog-stop.sh"
     inst_multiple -o wdctl
 }
-

modules.d/04watchdog/watchdog-stop.sh

@@ -1,2 +1,2 @@
 #!/bin/sh
-[ -c /dev/watchdog ] && echo -n 'V' > /dev/watchdog
+[ -c /dev/watchdog ] && printf 'V' > /dev/watchdog

modules.d/05busybox/module-setup.sh

@@ -1,10 +1,8 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
-    type -P busybox >/dev/null || return 1
+    require_binaries busybox || return 1
 
     return 255
 }
@@ -16,18 +14,16 @@ depends() {
 
 # called by dracut
 install() {
-    local _i _progs _path _busybox
+    local _i _path _busybox
+    local _progs=()
     _busybox=$(type -P busybox)
     inst $_busybox /usr/bin/busybox
-    for _i in $($_busybox | sed -ne '1,/Currently/!{s/,//g; s/busybox//g; p}')
-    do
-        _progs="$_progs $_i"
+    for _i in $($_busybox --list); do
+        [[ ${_i} == busybox ]] && continue
+        _progs+=("${_i}")
     done
 
-    # FIXME: switch_root should be in the above list, but busybox version hangs
-    # (using busybox-1.15.1-7.fc14.i686 at the time of writing)
-
-    for _i in $_progs; do
+    for _i in "${_progs[@]}"; do
         _path=$(find_binary "$_i")
         [ -z "$_path" ] && continue
         ln_r /usr/bin/busybox $_path