NEWS: update for version 044

if the config option does not exist, we ignore the error anyway

.dir-locals.el

@@ -0,0 +1,3 @@
+((nil . ((sh-basic-offset . 4)
+         (indent-tabs-mode . nil)
+         )))

.kateconfig

@@ -0,0 +1 @@
+kate: space-indent on; tab-width 4; indent-width 4; replace-tabs on; eol unix;

.kateproject

@@ -0,0 +1,9 @@
+{
+  "name": "Kate"
+  , "files": [ { "git": 1 } ]
+  , "build": {
+    "directory": "build"
+  , "build": "make -j $(getconf _NPROCESSORS_ONLN) all"
+  , "clean": "make clean"
+  }
+}

.mailmap

@@ -10,6 +10,9 @@ Andrey Borzenkov <arvidjaar@gmail.com> 		<arvidjaar@mail.ru>
 Dan Horák <dhorak@redhat.com> 			<dan@danny.cz>
 John Reiser <jreiser@bitwagon.com> 		<jreiser@BitWagon.com>
 Luca Berra <bluca@vodka.it> 			<bluca@comedia.it>
-Dave Young <dyoung@redhat.com>	 		dyoung@redhat.com
+Dave Young <dyoung@redhat.com>	 		<dyoung@redhat.com>
+Dave Young <dyoung@redhat.com>	 		<dave@redhat.com>
 Frederick Grose <fgrose@sugarlabs.org> 		<fgrose@gmail.com>
 Frederic Crozat <fcrozat@suse.com> 		<fcrozat@mandriva.com>
+Shawn W Dunn <sfalken@opensuse.org> 		<sfalken@opensuse.org>
+Kyle McMartin <kmcmarti@redhat.com>             <kyle@redhat.com>

50-dracut.install

@@ -1,32 +1,46 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
-if [[ -f /etc/kernel/cmdline ]]; then
-    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
-fi
-
-if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-    readarray -t BOOT_OPTIONS < /proc/cmdline
-fi
-
-unset noimageifnotneeded
-
-for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
-    if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
-        noimageifnotneeded="yes"
-        break
-    fi
-done
+COMMAND="$1"
+KERNEL_VERSION="$2"
+BOOT_DIR_ABS="$3"
+KERNEL_IMAGE="$4"
 
 ret=0
-case "$1" in
+case "$COMMAND" in
     add)
-	dracut ${noimageifnotneeded:+--noimageifnotneeded} "$3"/initrd "$2"
+        INITRD_IMAGE_PREGENERATED=${KERNEL_IMAGE%/*}/initrd
+        if [[ -f ${INITRD_IMAGE_PREGENERATED} ]]; then
+            # we found an initrd at the same place as the kernel
+            # use this and don't generate a new one
+            cp --reflink=auto "$INITRD_IMAGE_PREGENERATED" "$BOOT_DIR_ABS/initrd" \
+                && chown root:root "$BOOT_DIR_ABS/initrd" \
+                && chmod 0600 "$BOOT_DIR_ABS/initrd" \
+                && exit 0
+        fi
+
+        if [[ -f /etc/kernel/cmdline ]]; then
+            read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
+        elif [[ -f /usr/lib/kernel/cmdline ]]; then
+            read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
+        fi
+
+        if ! [[ ${BOOT_OPTIONS[*]} ]]; then
+            read -r -d '' -a BOOT_OPTIONS < /proc/cmdline
+        fi
+
+        unset noimageifnotneeded
+
+        for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
+            if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
+                noimageifnotneeded="yes"
+                break
+            fi
+        done
+	dracut ${noimageifnotneeded:+--noimageifnotneeded} "$BOOT_DIR_ABS"/initrd "$KERNEL_VERSION"
         ret=$?
 	;;
     remove)
-        rm -f -- "$3"/initrd
+        rm -f -- "$BOOT_DIR_ABS"/initrd
         ret=$?
 	;;
 esac

51-dracut-rescue-postinst.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 export LANG=C
 
@@ -59,7 +57,7 @@ if [[ ! -f $INITRDFILE ]]; then
 fi
 
 if [[ ! -f $NEW_KERNEL_IMAGE ]]; then
-    cp "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
+    cp --reflink=auto "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
     ((ret+=$?))
 fi
 

51-dracut-rescue.install

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 export LANG=C
 
@@ -42,12 +40,22 @@ fi
 [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
 
 if [[ -f /etc/kernel/cmdline ]]; then
-    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+    read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
+elif [[ -f /usr/lib/kernel/cmdline ]]; then
+    read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
 fi
+
 if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-    readarray -t BOOT_OPTIONS < /proc/cmdline
+    read -r -d '' -a line < /proc/cmdline
+    for i in "${line[@]}"; do
+        [[ "${i#initrd=*}" != "$i" ]] && continue
+        BOOT_OPTIONS+=("$i")
+    done
 fi
-if ! [[ $BOOT_OPTIONS ]]; then
+
+if ! [[ ${BOOT_OPTIONS[*]} ]]; then
+    echo "Could not determine the kernel command line parameters." >&2
+    echo "Please specify the kernel command line in /etc/kernel/cmdline!" >&2
     exit 1
 fi
 
@@ -71,11 +79,11 @@ case "$COMMAND" in
 
         [[ -d "$BOOT_DIR_ABS" ]] || mkdir -p "$BOOT_DIR_ABS"
 
-        if ! cp "$KERNEL_IMAGE" "$BOOT_DIR_ABS"/linux; then
+        if ! cp --reflink=auto "$KERNEL_IMAGE" "$BOOT_DIR_ABS"/linux; then
             echo "Can't copy '$KERNEL_IMAGE to '$BOOT_DIR_ABS/linux'!" >&2
         fi
 
-        dracut --no-hostonly  -a "rescue" "$BOOT_DIR_ABS"/initrd "$2"
+        dracut --no-hostonly -a "rescue" "$BOOT_DIR_ABS"/initrd "$KERNEL_VERSION"
         ((ret+=$?))
 
         {

AUTHORS

@@ -4,104 +4,155 @@ Amadeusz Żołnowski <aidecoe@aidecoe.name>
 Will Woods <wwoods@redhat.com>
 Philippe Seewer <philippe.seewer@bfh.ch>
 Warren Togami <wtogami@redhat.com>
-Jeremy Katz <katzj@redhat.com>
 Dave Young <dyoung@redhat.com>
+Jeremy Katz <katzj@redhat.com>
 David Dillow <dave@thedillows.org>
+Hannes Reinecke <hare@suse.de>
 Michal Soltys <soltys@ziu.info>
-Amerigo Wang <amwang@redhat.com>
 Colin Guthrie <colin@mageia.org>
+Amerigo Wang <amwang@redhat.com>
+Thomas Renninger <trenn@suse.de>
+WANG Chao <chaowang@redhat.com>
 Andrey Borzenkov <arvidjaar@gmail.com>
 Peter Jones <pjones@redhat.com>
+Alexander Tsoy <alexander@tsoy.me>
 Andreas Thienemann <andreas@bawue.net>
 Hans de Goede <hdegoede@redhat.com>
-WANG Chao <chaowang@redhat.com>
 John Reiser <jreiser@bitwagon.com>
 Luca Berra <bluca@vodka.it>
-Thomas Renninger <trenn@suse.de>
+Brian C. Lane <bcl@redhat.com>
 Daniel Drake <dsd@laptop.org>
 Dan Horák <dhorak@redhat.com>
+Frederick Grose <fgrose@sugarlabs.org>
 Baoquan He <bhe@redhat.com>
 Leho Kraav <leho@kraav.com>
-Brian C. Lane <bcl@redhat.com>
+Colin Walters <walters@verbum.org>
+Cristian Rodríguez <crrodriguez@opensuse.org>
+Fabian Deutsch <fabiand@fedoraproject.org>
 Kamil Rytarowski <n54@gmx.com>
 Marc Grimme <grimme@atix.de>
-Chao Wang <chaowang@redhat.com>
-Colin Walters <walters@verbum.org>
-Frederic Crozat <fcrozat@suse.com>
-Jesse Keating <jkeating@redhat.com>
-Milan Broz <mbroz@redhat.com>
+NeilBrown <neilb@suse.de>
 Peter Rajnoha <prajnoha@redhat.com>
 Radek Vykydal <rvykydal@redhat.com>
+Thorsten Behrens <tbehrens@suse.com>
+Chao Wang <chaowang@redhat.com>
+Frederic Crozat <fcrozat@suse.com>
+James Lee <jlee@thestaticvoid.com>
+Jesse Keating <jkeating@redhat.com>
+Milan Broz <mbroz@redhat.com>
+Mimi Zohar <zohar@linux.vnet.ibm.com>
+Nicolas Chauvet <kwizart@gmail.com>
 Roberto Sassu <roberto.sassu@polito.it>
+Stefan Reimer <it@startux.de>
 Anton Blanchard <anton@samba.org>
 Bill Nottingham <notting@redhat.com>
+Chapman Flack <g2@anastigmatix.net>
+Chris Leech <cleech@redhat.com>
 David Cantrell <dcantrell@redhat.com>
 Dennis Gilmore <dennis@ausil.us>
+Jan Synacek <jsynacek@redhat.com>
 Jon Ander Hernandez <jonan.h@gmail.com>
 Juan RP <xtraeme@gmail.com>
 Lance Albertson <lance@osuosl.org>
+Lidong Zhong <lzhong@suse.com>
 Marian Ganisin <mganisin@redhat.com>
 Michael Ploujnikov <plouj@somanetworks.com>
+Peter Robinson <pbrobinson@gmail.com>
+Silvio Fricke <silvio.fricke@gmail.com>
+Stig Telfer <stelfer@cray.com>
+Vasiliy Tolstov <v.tolstov@selfip.ru>
+Ville Skyttä <ville.skytta@iki.fi>
 Wim Muskee <wimmuskee@gmail.com>
+yuwata <watanabe.yu+github@gmail.com>
 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
 Alan Pevec <apevec@redhat.com>
-Alexander Tsoy <alexander@tsoy.me>
-Frederick Grose <fgrose@sugarlabs.org>
+Alex Harpin <development@landsofshadow.co.uk>
+Antony Messerli <amesserl@rackspace.com>
+Chao Fan <cfan@redhat.com>
+Daniel Schaal <farbing@web.de>
+Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
+Erwan Velu <erwan.velu@enovance.com>
+Hari Bathini <hbathini@linux.vnet.ibm.com>
 Ian Dall <ian@beware.dropbear.id.au>
 James Buren <ryuo@frugalware.org>
-James Lee <jlee@thestaticvoid.com>
 Joey Boggs <jboggs@redhat.com>
+Koen Kooi <koen@dominion.thruhere.net>
 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Kyle McMartin <kmcmarti@redhat.com>
+Lubomir Rintel <lkundrak@v3.sk>
+Lukas Wunner <lukas@wunner.de>
+Mike Gilbert <floppym@gentoo.org>
 Mike Snitzer <snitzer@redhat.com>
+Minfei Huang <mhuang@redhat.com>
 Przemysław Rudy <prudy1@o2.pl>
-Stefan Reimer <it@startux.de>
+Thomas Backlund <tmb@mageia.org>
 Thomas Lange <lange@informatik.uni-koeln.de>
+Till Maas <opensource@till.name>
 Vivek Goyal <vgoyal@redhat.com>
 Vladislav Bogdanov <bubble@hoster-ok.com>
 Adam Williamson <awilliam@redhat.com>
 Alexander Todorov <atodorov@redhat.com>
+Andrei Borzenkov <arvidjaar@gmail.com>
 Andy Lutomirski <luto@mit.edu>
 Anssi Hannula <anssi@mageia.org>
 Brandon Philips <brandon@ifup.co>
 Canek Peláez Valdés <caneko@gmail.com>
-Chris Leech <cleech@redhat.com>
 Christian Heinz <christian.ch.heinz@gmail.com>
+Christian Rodrigues <crrodriguez@opensuse.org>
 Cong Wang <amwang@redhat.com>
-Daniel Schaal <farbing@web.de>
+Daniel Drake <drake@endlessm.com>
 Dave Jones <davej@redhat.com>
-Dave Young <dave@redhat.com>
 Dennis Schridde <devurandom@gmx.net>
 Duane Griffin <duaneg@dghda.com>
+Fabian <fvogt@suse.com>
+Gerd von Egidy <gerd.von.egidy@intra2net.com>
 Glen Gray <slaine@slaine.org>
+HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
 Hermann Gausterer <git-dracut-2012@mrq1.org>
 James Laska <jlaska@redhat.com>
 Jan Stodola <jstodola@redhat.com>
 Jiri Pirko <jiri@resnulli.us>
 Joe Lawrence <Joe.Lawrence@stratus.com>
+Jonas Jonsson <jonas@websystem.se>
+Julian Wolf <juwolf@suse.com>
 Kevin Yung <Kevin.Yung@myob.com>
-Kyle McMartin <kyle@redhat.com>
 Lars R. Damerow <lars@pixar.com>
 Lennert Buytenhek <buytenh@wantstofly.org>
-Lubomir Rintel <lkundrak@v3.sk>
+Lukas Nykryn <lnykryn@redhat.com>
+Major Hayden <major@mhtx.net>
+Marian Csontos <mcsontos@redhat.com>
+Marko Myllynen <myllynen@redhat.com>
 Matt <smoothsailing72@hotmail.com>
 Matt Smith <shadowfax@gmx.com>
+Mei Liu <liumbj@linux.vnet.ibm.com>
 Michal Schmidt <mschmidt@redhat.com>
 Mike Gorse <mgorse@suse.com>
+Moritz 'Morty' Strübe <morty@gmx.net>
 Munehiro Matsuda <haro@kgt.co.jp>
-Nicolas Chauvet <kwizart@gmail.com>
+Nikoli <nikoli@gmx.us>
 Nikoli <nikoli@lavabit.com>
 Olivier Blin <dev@blino.org>
+P J P <ppandit@redhat.com>
 Paolo Bonzini <pbonzini@redhat.com>
 Peter Robinson <pbrobinson@fedoraproject.org>
+Praveen_Paladugu@Dell.com <Praveen_Paladugu@Dell.com>
 Pádraig Brady <P@draigBrady.com>
 Quentin Armitage <quentin@armitage.org.uk>
 Robert Buchholz <rbu@goodpoint.de>
+Rusty Bird <rustybird@openmailbox.org>
 Sergey Fionov <fionov@gmail.com>
+Shawn W Dunn <sfalken@opensuse.org>
 Srinivasa T N <seenutn@linux.vnet.ibm.com>
+Stijn Hoop <stijn@sandcat.nl>
 Thilo Bangert <thilo.bangert@gmx.net>
-Thomas Backlund <tmb@mageia.org>
+Tobias Geerinckx <tobias.geerinckx@gmail.com>
+Tom Gundersen <teg@jklm.no>
 Tomasz Torcz <tomek@pipebreaker.pl>
 Vadim Kuznetsov <vadimk@gentoo.org>
-Ville Skyttä <ville.skytta@iki.fi>
+Vaughan Cao <vaughan.cao@oracle.com>
+Vratislav Podzimek <vpodzime@redhat.com>
 Yanko Kaneti <yaneti@declera.com>
+Zhiguo Deng <bjzgdeng@linux.vnet.ibm.com>
+jloeser <jloeser@suse.de>
 maximilian attems <max@stro.at>
+xtraeme <xtraeme@voidlinux.eu>

Makefile

@@ -1,7 +1,7 @@
 -include dracut-version.sh
 
-VERSION = $(shell [ -d .git ] && git describe --abbrev=0 --tags 2>/dev/null || echo $(DRACUT_VERSION))
-GITVERSION = $(shell [ -d .git ] && { v=$$(git describe --tags 2>/dev/null); [ $${v\#*-} != $$v ] && echo -$${v\#*-}; } )
+VERSION ?= $(shell [ -d .git ] && git describe --abbrev=0 --tags 2>/dev/null || echo $(DRACUT_VERSION))
+GITVERSION ?= $(shell [ -d .git ] && { v=$$(git describe --tags 2>/dev/null); [ -n "$$v" ] && [ $${v\#*-} != $$v ] && echo -$${v\#*-}; } )
 
 -include Makefile.inc
 
@@ -13,8 +13,9 @@ sysconfdir ?= ${prefix}/etc
 bindir ?= ${prefix}/bin
 mandir ?= ${prefix}/share/man
 CFLAGS ?= -O2 -g -Wall
-CFLAGS += -std=gnu99  -D_FILE_OFFSET_BITS=64
+CFLAGS += -std=gnu99 -D_FILE_OFFSET_BITS=64 -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
 bashcompletiondir ?= ${datadir}/bash-completion/completions
+pkgconfigdatadir ?= $(datadir)/pkgconfig
 
 man1pages = lsinitrd.1
 
@@ -28,20 +29,20 @@ man8pages = dracut.8 \
             dracut-catimages.8 \
             mkinitrd.8 \
             mkinitrd-suse.8 \
-            modules.d/98systemd/dracut-cmdline.service.8 \
-            modules.d/98systemd/dracut-initqueue.service.8 \
-            modules.d/98systemd/dracut-mount.service.8 \
-            modules.d/98systemd/dracut-shutdown.service.8 \
-            modules.d/98systemd/dracut-pre-mount.service.8 \
-            modules.d/98systemd/dracut-pre-pivot.service.8 \
-            modules.d/98systemd/dracut-pre-trigger.service.8 \
-            modules.d/98systemd/dracut-pre-udev.service.8
+            modules.d/98dracut-systemd/dracut-cmdline.service.8 \
+            modules.d/98dracut-systemd/dracut-initqueue.service.8 \
+            modules.d/98dracut-systemd/dracut-mount.service.8 \
+            modules.d/98dracut-systemd/dracut-shutdown.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-mount.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-pivot.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-trigger.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-udev.service.8
 
 manpages = $(man1pages) $(man5pages) $(man7pages) $(man8pages)
 
 .PHONY: install clean archive rpm testimage test all check AUTHORS doc dracut-version.sh
 
-all: dracut-version.sh dracut-install skipcpio/skipcpio
+all: dracut-version.sh dracut.pc dracut-install skipcpio/skipcpio
 
 DRACUT_INSTALL_OBJECTS = \
         install/dracut-install.o \
@@ -81,22 +82,34 @@ all: doc
 endif
 
 %: %.xml
-	xsltproc -o $@ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
+	@rm -f -- "$@"
+	xsltproc -o "$@" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
 
 %.xml: %.asc
-	asciidoc -d manpage -b docbook -o $@ $<
+	@rm -f -- "$@"
+	asciidoc -d manpage -b docbook -o "$@" $<
 
 dracut.8: dracut.usage.asc dracut.8.asc
 
 dracut.html: dracut.asc $(manpages) dracut.css dracut.usage.asc
+	@rm -f -- dracut.xml
 	asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc
+	@rm -f -- dracut.html
 	xsltproc -o dracut.html --xinclude -nonet \
 		--stringparam custom.css.source dracut.css \
 		--stringparam generate.css.header 1 \
 		http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
-	rm -f -- dracut.xml
+	@rm -f -- dracut.xml
 
-install: dracut-version.sh
+dracut.pc: Makefile.inc Makefile
+	@echo "Name: dracut" > dracut.pc
+	@echo "Description: dracut" >> dracut.pc
+	@echo "Version: $(VERSION)$(GITVERSION)" >> dracut.pc
+	@echo "dracutdir=$(pkglibdir)" >> dracut.pc
+	@echo "dracutmodulesdir=$(pkglibdir)/modules.d" >> dracut.pc
+	@echo "dracutconfdir=$(pkglibdir)/dracut.conf.d" >> dracut.pc
+
+install: all
 	mkdir -p $(DESTDIR)$(pkglibdir)
 	mkdir -p $(DESTDIR)$(bindir)
 	mkdir -p $(DESTDIR)$(sysconfdir)
@@ -109,6 +122,7 @@ install: dracut-version.sh
 	install -m 0644 dracut.conf $(DESTDIR)$(sysconfdir)/dracut.conf
 	mkdir -p $(DESTDIR)$(sysconfdir)/dracut.conf.d
 	mkdir -p $(DESTDIR)$(pkglibdir)/dracut.conf.d
+	install -m 0755 dracut-init.sh $(DESTDIR)$(pkglibdir)/dracut-init.sh
 	install -m 0755 dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions.sh
 	install -m 0755 dracut-version.sh $(DESTDIR)$(pkglibdir)/dracut-version.sh
 	ln -fs dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions
@@ -124,10 +138,10 @@ ifneq ($(enable_documentation),no)
 endif
 	if [ -n "$(systemdsystemunitdir)" ]; then \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
-		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
-		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants; \
+		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
+		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants; \
 		ln -s ../dracut-shutdown.service \
-		$(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants/dracut-shutdown.service; \
+		$(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants/dracut-shutdown.service; \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants; \
 		for i in \
 		    dracut-cmdline.service \
@@ -138,7 +152,7 @@ endif
 		    dracut-pre-trigger.service \
 		    dracut-pre-udev.service \
 		    ; do \
-			ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
+			ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
 			ln -s ../$$i \
 			$(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants/$$i; \
 		done \
@@ -155,8 +169,11 @@ endif
 	mkdir -p $(DESTDIR)${bashcompletiondir}
 	install -m 0644 dracut-bash-completion.sh $(DESTDIR)${bashcompletiondir}/dracut
 	install -m 0644 lsinitrd-bash-completion.sh $(DESTDIR)${bashcompletiondir}/lsinitrd
+	mkdir -p $(DESTDIR)${pkgconfigdatadir}
+	install -m 0644 dracut.pc $(DESTDIR)${pkgconfigdatadir}/dracut.pc
 
 dracut-version.sh:
+	@rm -f dracut-version.sh
 	@echo "DRACUT_VERSION=$(VERSION)$(GITVERSION)" > dracut-version.sh
 
 clean:
@@ -188,7 +205,9 @@ rpm: dracut-$(VERSION).tar.xz syncheck
 	rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
 	cp dracut-$(VERSION).tar.xz "$$rpmbuild"; \
 	LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
-	(cd "$$rpmbuild"; rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
+	(cd "$$rpmbuild"; \
+	wget https://www.gnu.org/licenses/lgpl-2.1.txt; \
+	rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
 	        --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
 		--define "_rpmdir $$PWD" -ba dracut.spec; ) && \
 	( mv "$$rpmbuild"/$$(arch)/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr -- "$$rpmbuild"; ls *.rpm )
@@ -198,7 +217,8 @@ syncheck:
                 [ "$${i##*/}" = "module-setup.sh" ] && continue; \
                 read line < "$$i"; [ "$${line#*bash*}" != "$$line" ] && continue; \
 		[ $$V ] && echo "posix syntax check: $$i"; bash --posix -n "$$i" ; ret=$$(($$ret+$$?)); \
-		[ $$V ] && echo "checking for [[: $$i"; if grep -Fq '[[ ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains [["; fi \
+		[ $$V ] && echo "checking for [[: $$i"; if grep -Fq '[[ ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains [["; fi; \
+		[ $$V ] && echo "checking for echo -n: $$i"; if grep -Fq 'echo -n ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains echo -n"; fi \
 	done;exit $$ret
 	@ret=0;for i in *.sh mkinitrd-dracut.sh modules.d/*/*.sh \
 	                modules.d/*/module-setup.sh; do \
@@ -210,7 +230,11 @@ check: all syncheck rpm
 	@$(MAKE) -C test check
 
 testimage: all
-	./dracut.sh -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	./dracut.sh -N -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	@echo wrote  test-$(shell uname -r).img
+
+debugtestimage: all
+	./dracut.sh --debug -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img
 
 testimages: all
@@ -219,12 +243,20 @@ testimages: all
 	./dracut.sh -l -a debug --no-kernel -f test-dracut.img $(shell uname -r)
 	@echo wrote  test-dracut.img
 
+debughostimage: all
+	./dracut.sh --debug -H -l -f test-$(shell uname -r).img $(shell uname -r)
+	@echo wrote  test-$(shell uname -r).img
+
 hostimage: all
 	./dracut.sh -H -l -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img
 
+efi: all
+	./dracut.sh --uefi -H -l -f linux-$(shell uname -r).efi $(shell uname -r)
+	@echo wrote linux-$(shell uname -r).efi
+
 AUTHORS:
-	git shortlog  --numbered --summary -e |while read a rest; do echo $$rest;done > AUTHORS
+	git shortlog  --numbered --summary -e |while read a rest || [ -n "$$rest" ]; do echo $$rest;done > AUTHORS
 
 dracut.html.sign: dracut-$(VERSION).tar.xz dracut.html
 	gpg-sign-all dracut-$(VERSION).tar.xz dracut.html

NEWS

@@ -1,3 +1,266 @@
+dracut-044
+==========
+creation:
+- better udev & systemd dir detection
+- split dracut-functions.sh in dracut-init.sh and dracut-functions.sh
+  dracut-functions.sh can now be sourced by external tools
+- detect all btrfs devices needed
+- added flag file if initqueue is needed
+- don't overwrite anything, if initramfs image file creation failed
+- if no compressor is specified, try to find a suitable one
+- drop scanning kernel config for CONFIG_MICROCODE_*_EARLY
+- remove "_EARLY" from CONFIG_MICROCODE_* checks
+- dracut.sh: add command line option for install_i18_all
+  --no-hostonly-i18n -> install_i18n_all=yes
+  --hostonly-i18n -> install_i18n_all=no
+- --no-reproducible to turn off reproducible mode
+- dracut-function.sh can now be sourced from outside of dracut
+- dracut-init.sh contains all functions, which only can be used from
+  within the dracut infrastructure
+- support --mount with just mountpoint as a parameter
+- removed action_on_fail support
+- removed host_modalias concept
+- do not create microcode, if no firmware is available
+- skip gpg files in microcode generation
+
+initramfs:
+- ensure pre-mount (and resume) run before root fsck
+- add --online option to initqueue
+
+qemu:
+- fixed virtual machine detection
+
+lvm:
+- remove all quirk arguments for lvm >= 2.2.221
+
+dmsquash:
+- fixup for checkisomd5
+- increase timeout for checkisomd5
+- use non-persistent metadata snapshots for transient overlays.
+- overflow support for persistent snapshot.
+- use non-persistent metadata snapshots.
+- avoid an overlay for persistent, uncompressed, read-write live installations.
+
+multipath:
+- multipath.conf included in hostonly mode
+- install all multipath path selector kernel modules
+
+iSCSI:
+- use the iBFT initiator name, if found and set
+- iscsid now present in the initramfs
+- iscsistart is done with systemd-run asynchrone to do things in
+  paralllel. Also restarted for every new interface which shows up.
+- If rd.iscsi.waitnet (default) is set, iscsistart is done only
+  after all interfaces are up.
+- If not all interfaces are up and rd.iscsi.testroute (default) is set,
+  the route to a iscsi target IP is checked and skipped, if there is none.
+- If all things fail, we issue a "dummy" interface iscsiroot to retry
+  everything in the initqueue/timeout.
+
+network:
+- added DHCP RENEW/REBIND
+- IPv4 DHCP lease time now optional (bootp)
+- IPv6 nfs parsing
+- fixed IPv6 route parsing
+- rd.peerdns=0 parameter to disable DHCP nameserver setting
+- detect duplicate IPv4 addresses for static addresses
+- if interfaces are specified with its enx* name, bind the correspondent MAC to the interface name
+- if multiple "ip=" are present on the kernel command line "rd.neednet=1" is assumed
+- add options to tweak timeouts
+     rd.net.dhcp.retry=<cnt>
+         If this option is set, dracut will try to connect via dhcp
+         <cnt> times before failing. Default is 1.
+
+     rd.net.timeout.dhcp=<arg>
+         If this option is set, dhclient is called with "-timeout <arg>".
+
+     rd.net.timeout.iflink=<seconds>
+         Wait <seconds> until link shows up. Default is 60 seconds.
+
+     rd.net.timeout.ifup=<seconds>
+         Wait <seconds> until link has state "UP". Default is 20 seconds.
+
+     rd.net.timeout.route=<seconds>
+         Wait <seconds> until route shows up. Default is 20 seconds.
+
+     rd.net.timeout.ipv6dad=<seconds>
+         Wait <seconds> until IPv6 DAD is finished. Default is 50 seconds.
+
+     rd.net.timeout.ipv6auto=<seconds>
+         Wait <seconds> until IPv6 automatic addresses are assigned.
+         Default is 40 seconds.
+
+     rd.net.timeout.carrier=<seconds>
+         Wait <seconds> until carrier is recognized. Default is 5 seconds.
+
+IMA:
+- load signed certificates in the IMA keyring, see modules.d/98integrity/README
+- load EVM public key in the kernel _evm keyring
+
+FCoE:
+    fcoe: start with fcoemon instead of fipvlan
+
+dracut-043
+==========
+- add missing dmsquash-generator
+
+dracut-042
+==========
+- fixed dmsetup shutdown
+- new kernel command line option "rd.live.overlay.thin"
+    This option changes the underlying mechanism for the overlay in the
+    dmsquash module.
+    Instead of a plain dm snapshot a dm thin snapshot is used. The advantage
+    of the thin snapshot is, that the TRIM command is recognized, which
+    means that at runtime, only the occupied blocks will be claimed from
+    memory, and freed blocks will really be freed in ram.
+- dmsquash: Add squashfs support to rd.live.fsimg
+    Previously rd.live.fsimg only supported filesystems residing in
+    (compressed) archives.
+    Now rd.live.fsimg can also be used when a squashfs image is used.
+    This is achieved by extracting the rootfs image from the squashfs and
+    then continue with the default routines for rd.live.fsimg.
+- lvm: add support for LVM system id
+- split up the systemd dracut module
+    Basic systemd functionality is in 00systemd now.
+    Switching root and the initrd.target is in 00systemd-initrd.
+    Dracut additions to the systemd initrd are in 98dracut-systemd.
+- support for creating a UEFI boot executable via argument "--uefi"
+    With an EFI stub, the kernel, the initramfs and a kernel cmdline can be
+    glued together to a single UEFI executable, which can be booted by a
+    UEFI BIOS.
+- network: split out kernel-network-modules, now in 90kernel-network-modules
+- support for ethernet point-to-point connections configured via DHCP
+- kernel-modules: install all HID drivers
+- dracut.pc pkg-config file
+- mount /dev, /dev/shm and /run noexec
+
+dracut-041
+==========
+- fixed the shutdown loop
+- fixed gzip compression for versions, which do not have --rsyncable
+- fixed ifcfg generation for persistent interface names
+- multipath:
+  * new option to turn off multipath "rd.multipath=0" completly
+  * preload scsi dh modules
+  * start multipathd via systemd service
+- do not fail, if user pressed ESC during media check
+- fixed systemd-journal by symlinking /var/log to /run/initramfs/log
+- initrd-release moved to /usr/lib
+- lots of iSCSI fixes
+- new "rd.timeout" to specify the systemd JobTimeoutSec for devices
+- if $initrd/etc/cmdline.d/* has a "root=" and the kernel cmdline does not,
+  generate a mount unit for it
+- increased the initqueue timeout for non systemd initramfs to 180s
+- $initrd/etc/cmdline.d/ hostonly files are now generated for NFS
+- make use of systemd-hibernate-resume, if available
+- fixed ldconfig parsing for hwcap output
+- network: add support for comma separated autoconf options like ip=eth0:auto6,dhcp
+- new parameter "rd.live.overlay.size" to specify the overlay for live images
+- changed the test suite for the new sfdisk syntax
+- added cache tools for dm-cache setups
+
+dracut-040
+==========
+- fixed dracut module dependency checks
+- fixed test suite
+
+dracut-039
+==========
+- DRACUT_PATH can now be used to specify the PATH used by dracut
+  to search for binaries instead of the default
+  /usr/sbin:/sbin:/usr/bin:/bin
+  This should be set in the distribution config file
+  /usr/lib/dracut/dracut.conf.d/01-dist.conf
+- add "--loginstall <DIR>" and loginstall="<DIR>" options
+  to record all files, which are installed from the host fs
+- "rd.writable.fsimg" - support for read/write filesystem images
+- "rd.route" kernel command line parameter added
+- "--install-optional" and install_optional_items added
+- find plymouth pkglibdir on debian
+- torrent support for live images
+  root=live:torrent://example.com/liveboot.img.torrent
+  and generally added as a download handler
+- disable microcode, if the kernel does not support it
+- speed up ldconfig_paths()
+- more ARM modules
+- fixed inst*() functions and "-H" handling
+- fixed bridge setup
+- added --force-drivers parameter and force_drivers=+ config option
+  to enforce driver loading at early boot time
+- documented "iso-scan/filename" usage in grub
+- various bugfixes
+
+dracut-038
+==========
+- "rd.cmdline=ask" will ask the user on the console to enter additional
+  kernel command line parameters
+- "rd.hostonly=0" removes all "hostonly" added custom files,
+  which is useful in combination with "rd.auto" or other specific parameters,
+  if you want to boot on the same hardware, but the compiled in configuration
+  does not match your setup anymore
+- inst* functions and dracut-install now accept the "-H" flag, which logs all
+  installed files to /lib/dracut/hostonly-files. This is used to remove those
+  files, if rd.hostonly is given on the kernel command line
+- strstr now only does literal string match,
+  please use strglob and strglobin for globs
+- fixed unpacking of the microcode image on shutdown
+- added systemd-gpt-auto-generator
+- fcoe: wait for lldpad to be ready
+- network: handle "ip=dhcp6"
+- network: DCHPv6: set valid_lft and preferred_lft
+- dm: support dm-cache
+- fstab: do not mount and fsck from fstab if using systemd
+- break at switch_root only for bare rd.break and not for any rd.break=...
+- nbd: make use of "--systemd-mark", otherwise it gets killed on switch_root
+- fcoe-uefi: fixed cmdline parameter generation
+- iscsi: deprecate "ip=ibft", use "rd.iscsi.ibft[=1]" from now on
+- "lsinitrd -m" now only lists the dracut modules of the image
+- a lot of small bugfixes
+
+dracut-037
+==========
+- dracut: hostonly_cmdline variable and command line switch
+    Toggle hostonly cmdline storing in the initramfs
+    --hostonly-cmdline:
+        Store kernel command line arguments needed in the initramfs
+    --no-hostonly-cmdline:
+        Do not store kernel command line arguments needed in the initramfs
+- dracut: --mount now understands full fstab lines
+- dracut now also includes drivers from the /lib/modules/<version>/updates directory
+- dracut: only set the owner of files to 0:0, if generated as non-root
+- dracut now directly writes to the initramfs file
+- dracut: call lz4 with the legacy flag (linux kernel does not support the new format)
+- systemd: rootfs-generator generates JobTimeout=0 units for the root device
+- systemd: added the systemd-sysctl service
+- systemd: add 80-net-setup-link.rules and .link files for persistent interface renaming
+- systemd: make dracut-shutdown.service failure non-fatal
+- network: various IPv6 fixes
+- network: DCHCP for IPv6
+- network: understand ip=.....:<dns1>:<dns2>
+- network: parse ibft nameserver settings
+- shutdown: if kexec fails, just reboot
+- lvm: handle one LV at a time with lvchange
+- module-setup.sh:
+    New functions require_binaries() and require_any_binary() to be used
+    in the check() section of module-setup.sh.
+- a lot of small bugfixes
+
+Contributions from:
+Harald Hoyer
+Alexander Tsoy
+Till Maas
+Amadeusz Żołnowski
+Brian C. Lane
+Colin Guthrie
+Dave Young
+WANG Chao
+Shawn W Dunn
+
+dracut-036
+==========
+- fixed skipcpio signature checking
+
 dracut-035
 ==========
 - changed dracut tarball compression to xz

PKGBUILD

@@ -1,6 +1,6 @@
 pkgname=dracut-git
-pkgver=$(date +%s)
-pkgrel=$(git log --pretty=format:%h |head -n 1)
+pkgver=1
+pkgrel=1
 pkgdesc="Initramfs generation utility"
 arch=('i686' 'x86_64')
 url="https://dracut.wiki.kernel.org/"
@@ -14,8 +14,25 @@ backup=(etc/dracut.conf)
 source=()
 md5sums=()
 
+# out of tree builds disallowed for this PKGFILE
+BUILDDIR="${PWD}"
+PKGDEST="${PWD}"
+SRCDEST=""
+SRCPKGDEST=""
+LOGDEST=""
+
+pkgver() {
+  cd ..
+  desc="$(git describe)"
+  printf "%s.%s.%s" ${desc//-/ }
+}
+
 build() {
   cd ..
   make sysconfdir=/etc || return 1
+}
+
+package() {
+  cd ..
   make DESTDIR="${pkgdir}" sysconfdir=/etc install || return 1
 }

README.testsuite

@@ -1,14 +1,17 @@
 For the testsuite to work, you will have to install at least the following software packages:
-dash
-asciidoc
-mdadm
-lvm2
-cryptsetup
-nfs-utils
-netbsd-iscsi
-nbd
-dhcp (dhcp-server on openSUSE)
+dash \
+bridge-utils \
+asciidoc \
+mdadm \
+lvm2 \
+cryptsetup \
+nfs-utils \
+nbd \
+dhcp-server \
+scsi-target-utils \
 iscsi-initiator-utils
+
+
 TEST-04-FULL-SYSTEMD: systemd >= 187
 
 How to run the testsuite:

TODO

@@ -6,6 +6,7 @@ Items are ordered in priority.
 
 INITRAMFS TODO
 
+- search domain string
 - allow dual stack configuration (IPv4, IPv6) for the same interface
 - "bind-mount" kernel drivers in real root for the rescue image,
   if the real root does not have any kernel modules for this kernel
@@ -28,6 +29,7 @@ GENERATOR TODO
 
 - report errors on missing files in check()
 - remove wait for swap devs, if no "resume=" is given on the kernel command line
+- remove wait for swap devs, if the "resume" dracut module is not included (omitted)
 - add presets (predefined set of modules)
 - add interpreter/plugin-scripts to be sourced at the beginning or end (can use dracut-functions)
 - add mechanism for module specific command line options
@@ -47,3 +49,6 @@ Future Enhancement Requests
 - run ssh server to enter crypto password or perform debugging (supported by debian)
 - https://bugzilla.redhat.com/show_bug.cgi?id=524727 - dracut + encrypted root + networking
 
+- lsinitrd --print-cmdline
+- dracut --print-cmdline error if additional arguments
+- library for cmdline

configure

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # We don't support srcdir != builddir
 echo \#buildapi-variable-no-builddir >/dev/null

dracut-bash-completion.sh

@@ -1,7 +1,4 @@
 #
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-#
 # Copyright 2013 Red Hat, Inc.  All rights reserved.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -34,13 +31,17 @@ _dracut() {
                               --local --hostonly --no-hostonly --fstab --help --bzip2 --lzma
                               --xz --no-compress --gzip --list-modules --show-modules --keep
                               --printsize --regenerate-all --noimageifnotneeded --early-microcode
-                              --no-early-microcode --print-cmdline --prelink --noprelink'
+                              --no-early-microcode --print-cmdline --prelink --noprelink --reproducible
+                              --uefi
+                              '
 
                        [ARG]='-a -m -o -d -I -k -c -L --kver --add --force-add --add-drivers
                               --omit-drivers --modules --omit --drivers --filesystems --install
                               --fwdir --libdirs --fscks --add-fstab --mount --device --nofscks
                               --kmoddir --conf --confdir --tmpdir --stdlog --compress --prefix
-                              --kernel-cmdline --sshkey --persistent-policy'
+                              --kernel-cmdline --sshkey --persistent-policy --install-optional
+                              --loginstall --uefi-stub --kernel-image
+                              '
         )
 
         if __contains_word "$prev" ${OPTS[ARG]}; then
@@ -49,7 +50,7 @@ _dracut() {
                                 comps=$(compgen -d -- "$cur")
                                 compopt -o filenames
                         ;;
-                        -c|--conf|--sshkey|--add-fstab|--add-device|-I|--install)
+                        -c|--conf|--sshkey|--add-fstab|--add-device|-I|--install|--install-optional)
                                 comps=$(compgen -f -- "$cur")
                                 compopt -o filenames
                         ;;

dracut-catimages.sh

@@ -1,6 +1,4 @@
 #!/bin/bash --norc
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Copyright 2009 Red Hat, Inc.  All rights reserved.
 #

dracut-initramfs-restore.sh

@@ -1,13 +1,21 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 set -e
 
+# do some sanity checks first
+[ -e /run/initramfs/bin/sh ] && exit 0
+[ -e /run/initramfs/.need_shutdown ] || exit 0
+
 KERNEL_VERSION="$(uname -r)"
 
+[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
+SKIP="$dracutbasedir/skipcpio"
+[[ -x $SKIP ]] || SKIP=cat
+
 [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
 
+mount -o ro /boot &>/dev/null || true
+
 if [[ $MACHINE_ID ]] && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
     IMG="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
 fi
@@ -16,11 +24,12 @@ fi
 cd /run/initramfs
 
 [ -f .need_shutdown -a -f "$IMG" ] || exit 1
-if zcat "$IMG"  | cpio -id --quiet >/dev/null; then
+
+if $SKIP "$IMG" | zcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then
     rm -f -- .need_shutdown
-elif xzcat "$IMG"  | cpio -id --quiet >/dev/null; then
+elif $SKIP "$IMG" | xzcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then
     rm -f -- .need_shutdown
-elif lz4 -d -c "$IMG"  | cpio -id --quiet >/dev/null; then
+elif $SKIP "$IMG" | lz4 -d -c | cpio -id --no-absolute-filenames --quiet >/dev/null; then
     rm -f -- .need_shutdown
 else
     # something failed, so we clean up

dracut-logger.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 et filetype=sh
 #
 # logging faciality module for dracut both at build- and boot-time
 #
@@ -150,8 +148,7 @@ dlog_init() {
             && type -P systemd-cat &>/dev/null \
             && systemctl --quiet is-active systemd-journald.socket &>/dev/null \
             && { echo "dracut-$DRACUT_VERSION" | systemd-cat -t 'dracut' &>/dev/null; } ; then
-            readonly _dlogdir="$(mktemp --tmpdir="$TMPDIR/" -d -t dracut-log.XXXXXX)"
-            readonly _systemdcatfile="$_dlogdir/systemd-cat"
+            readonly _systemdcatfile="$DRACUT_TMPDIR/systemd-cat"
             mkfifo "$_systemdcatfile"
             readonly _dlogfd=15
             systemd-cat -t 'dracut' --level-prefix=true <"$_systemdcatfile" &
@@ -266,9 +263,9 @@ _lvl2syspri() {
 # Conversion is done as follows:
 #
 # <tt>
-#   FATAL(1) -> LOG_EMERG (0)
+#   none     -> LOG_EMERG (0)
 #   none     -> LOG_ALERT (1)
-#   none     -> LOG_CRIT (2)
+#   FATAL(1) -> LOG_CRIT (2)
 #   ERROR(2) -> LOG_ERR (3)
 #   WARN(3)  -> LOG_WARNING (4)
 #   none     -> LOG_NOTICE (5)
@@ -282,7 +279,7 @@ _dlvl2syslvl() {
     local lvl
 
     case "$1" in
-        1) lvl=0;;
+        1) lvl=2;;
         2) lvl=3;;
         3) lvl=4;;
         4) lvl=6;;
@@ -326,7 +323,7 @@ _do_dlog() {
     local msg="$*"
     local lmsg="$lvlc: $*"
 
-    (( $lvl <= $stdloglvl )) && echo "$msg" >&2
+    (( $lvl <= $stdloglvl )) && printf -- 'dracut: %s\n' "$msg" >&2
 
     if (( $lvl <= $sysloglvl )); then
         if [[ "$_dlogfd" ]]; then
@@ -367,7 +364,7 @@ dlog() {
     if (( $# > 1 )); then
         _do_dlog "$@"
     else
-        while read line; do
+        while read line || [ -n "$line" ]; do
             _do_dlog "$1" "$line"
         done
     fi

dracut.8.asc

@@ -6,7 +6,7 @@ DRACUT(8)
 
 NAME
 ----
-dracut - low-level tool for generating an initramfs image
+dracut - low-level tool for generating an initramfs/initrd image
 
 SYNOPSIS
 --------
@@ -28,10 +28,12 @@ At boot time, the kernel unpacks that archive into RAM disk, mounts and uses it
 as initial root file system. All finding of the root device happens in this
 early userspace.
 
+Initramfs images are also called "initrd".
+
 For a complete list of kernel command line options see *dracut.cmdline*(7).
 
 If you are dropped to an emergency shell, while booting your initramfs,
-the file _/run/initramfs/rdsosreport.txt_ is created, which can be safed to a
+the file _/run/initramfs/rdsosreport.txt_ is created, which can be saved to a
 (to be mounted by hand) partition (usually /boot) or a USB stick.
 Additional debugging info can be produced by adding **rd.debug** to the kernel
 command line. _/run/initramfs/rdsosreport.txt_ contains all logs and the output
@@ -54,33 +56,6 @@ OPTIONS
 **-f, --force**::
     overwrite existing initramfs file.
 
-**-m, --modules** _<list of dracut modules>_::
-    specify a space-separated list of dracut modules to call when building the
-    initramfs. Modules are located in _/usr/lib/dracut/modules.d_. This
-    parameter can be specified multiple times.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --modules "module1 module2"  ...
-----
-===============================
-
-**-o, --omit** _<list of dracut modules>_::
-    omit a space-separated list of dracut modules. This parameter can be
-    specified multiple times.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --omit "module1 module2"  ...
-----
-===============================
-
 **-a, --add** _<list of dracut modules>_::
     add a space-separated list of dracut modules to the default set of modules.
     This parameter can be specified multiple times.
@@ -108,6 +83,35 @@ example:
 ----
 ===============================
 
+**-o, --omit** _<list of dracut modules>_::
+    omit a space-separated list of dracut modules. This parameter can be
+    specified multiple times.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --omit "module1 module2"  ...
+----
+===============================
+
+**-m, --modules** _<list of dracut modules>_::
+    specify a space-separated list of dracut modules to call when building the
+    initramfs. Modules are located in _/usr/lib/dracut/modules.d_. This
+    parameter can be specified multiple times.
+    This option forces dracut to only include the specified dracut modules.
+    In most cases the "--add" option is what you want to use.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --modules "module1 module2"  ...
+----
+===============================
+
 **-d, --drivers** _<list of kernel modules>_::
     specify a space-separated list of kernel modules to exclusively include
     in the initramfs. The kernel modules have to be specified without the ".ko"
@@ -136,6 +140,19 @@ example:
 ----
 ===============================
 
+**--force-drivers** _<list of kernel modules>_::
+    See add-drivers above. But in this case it is ensured that the drivers
+    are tried to be loaded early via modprobe.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --force-drivers "kmodule1 kmodule2"  ...
+----
+===============================
+
 **--omit-drivers** _<list of kernel modules>_::
     specify a space-separated list of kernel modules not to add to the
     initramfs.
@@ -300,6 +317,12 @@ provide a valid _/etc/fstab_.
 **-N, --no-hostonly**::
     Disable Host-Only mode
 
+**--hostonly-cmdline**:
+    Store kernel command line arguments needed in the initramfs
+
+**--no-hostonly-cmdline**:
+    Do not store kernel command line arguments needed in the initramfs
+
 **--persistent-policy** _<policy>_::
     Use _<policy>_ to address disks and partitions.
     _<policy>_ can be any directory name found in /dev/disk.
@@ -311,9 +334,17 @@ provide a valid _/etc/fstab_.
 **--add-fstab** _<filename>_::
     Add entries of _<filename>_ to the initramfs /etc/fstab.
 
-**--mount** "_<device>_ _<mountpoint>_ _<filesystem type>_ _<filesystem options>_"::
-    Mount _<device>_ on _<mountpoint>_ with _<filesystem type>_ and _<filesystem
-    options>_ in the initramfs
+**--mount** "_<device>_ _<mountpoint>_ _<filesystem type>_ [_<filesystem options>_ [_<dump frequency>_ [_<fsck order>_]]]"::
+    Mount _<device>_ on _<mountpoint>_ with _<filesystem type>_ in the
+    initramfs. _<filesystem options>_, _<dump options>_ and _<fsck order>_ can
+    be specified, see fstab manpage for the details.
+    The default _<filesystem options>_ is "defaults".
+    The default _<dump frequency>_ is "0".
+    the default _<fsck order>_ is "2".
+
+**--mount** "_<mountpoint>_"::
+    Like above, but _<device>_, _<filesystem type>_ and _<filesystem options>_
+    are determined by looking at the current mounts.
 
 **--add-device** _<device>_ ::
     Bring up _<device>_ in initramfs, _<device>_ should be the device name.
@@ -339,6 +370,9 @@ example:
 ----
 ===============================
 
+**--install-optional** _<file list>_::
+    install the space separated list of files into the initramfs, if they exist.
+
 **--gzip**::
     Compress the generated initramfs using gzip. This will be done by default,
     unless another compression option or --no-compress is passed. Equivalent to
@@ -399,6 +433,12 @@ will not be able to boot.
     Do not compress the generated initramfs. This will override any other
     compression options.
 
+**--reproducible**::
+    Create reproducible images.
+
+**--no-reproducible**::
+    Do not create reproducible images.
+
 **--list-modules**::
     List all available dracut modules.
 
@@ -433,6 +473,23 @@ will not be able to boot.
     Regenerate all initramfs images at the default location with the kernel
     versions found on the system. Additional parameters are passed through.
 
+**--loginstall _<DIR>_**::
+    Log all files installed from the host to _<DIR>_.
+
+**--uefi**::
+    Instead of creating an initramfs image, dracut will create an UEFI executable,
+    which can be executed by an UEFI BIOS.
+
+**--uefi-stub _<FILE>_**::
+    Specifies the UEFI stub loader, which will load the attached kernel, initramfs and
+    kernel command line and boots the kernel. The default is
+    _/lib/systemd/boot/efi/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+    or _/usr/lib/gummiboot/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+
+**--kernel-image _<FILE>_**::
+    Specifies the kernel image, which to include in the UEFI executable. The default is
+    _/lib/modules/<KERNEL-VERSION>/vmlinuz_ or _/boot/vmlinuz-<KERNEL-VERSION>_
+
 FILES
 -----
 _/var/log/dracut.log_::
@@ -490,4 +547,4 @@ Will Woods
 
 SEE ALSO
 --------
-*dracut.cmdline*(7) *dracut.conf*(5)
+*dracut.cmdline*(7) *dracut.conf*(5) *lsinitrd*(1)

dracut.cmdline.7.asc

@@ -81,6 +81,14 @@ rootfstype=ext3
     enable autoassembly of special devices like cryptoLUKS, dmraid, mdraid or
     lvm. Default is off as of dracut version >= 024.
 
+**rd.hostonly=0**::
+    removes all compiled in configuration of the host system the initramfs image
+    was built on. This helps booting, if any disk layout changed, especially in
+    combination with rd.auto or other parameters specifying the layout.
+
+**rd.cmdline=ask**::
+    prompts the user for additional kernel command line parameters
+
 **rd.fstab=0**::
     do not honor special mount options for the root filesystem found in
     _/etc/fstab_ of the real root.
@@ -101,6 +109,23 @@ resume=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
     the init system performs fsck before remount, you might want to use this
     option to avoid duplication.
 
+iso-scan/filename
+~~~~~~~~~~~~~~~~~
+
+Using iso-scan/filename with a Fedora/Red Hat/CentOS Live iso should just work
+by copying the original kernel cmdline parameters.
+
+[listing]
+.Example
+--
+menuentry 'Live Fedora 20' --class fedora --class gnu-linux --class gnu --class os {
+    set isolabel=Fedora-Live-LXDE-x86_64-20-1
+    set isofile="/boot/iso/Fedora-Live-LXDE-x86_64-20-1.iso"
+    loopback loop $isofile
+    linux (loop)/isolinux/vmlinuz0 boot=isolinux iso-scan/filename=$isofile root=live:LABEL=$isolabel ro rd.live.image quiet rhgb
+    initrd (loop)/isolinux/initrd0.img
+}
+--
 
 Misc
 ~~~~
@@ -117,11 +142,16 @@ Misc
     have been loaded. This parameter can be specified multiple times.
 
 **rd.retry=**__<seconds>__::
-    specify how long dracut should wait for devices to appear.
+    specify how long dracut should retry the initqueue to configure devices.
     The default is 30 seconds. After 2/3 of the time, degraded raids are force
     started. If you have hardware, which takes a very long time to announce its
     drives, you might want to extend this value.
 
+**rd.timeout=**__<seconds>__::
+    specify how long dracut should wait for devices to appear. The
+    default is '0', which means 'forever'. Note that this timeout
+    should be longer than rd.retry to allow for proper configuration.
+
 **rd.noverifyssl**::
     accept self-signed certificates for ssl downloads.
 
@@ -133,7 +163,7 @@ Misc
 Debug
 ~~~~~
 If you are dropped to an emergency shell, the file 
-_/run/initramfs/rdsosreport.txt_ is created, which can be safed to a (to be
+_/run/initramfs/rdsosreport.txt_ is created, which can be saved to a (to be
 mounted by hand) partition (usually /boot) or a USB stick. Additional debugging
 info can be produced by adding **rd.debug** to the kernel command line.
 _/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools.
@@ -354,6 +384,11 @@ DM RAID
    only activate the raid sets with the given UUID. This parameter can be
    specified multiple times.
 
+MULTIPATH
+~~~~~~~~~
+**rd.multipath=0**::
+   disable multipath detection
+
 FIPS
 ~~~~
 **rd.fips**::
@@ -437,7 +472,7 @@ USB Android phone::
 * enp0s29u1u2
 =====================
 
-**ip=**__{dhcp|on|any|dhcp6|auto6|ibft}__::
+**ip=**__{dhcp|on|any|dhcp6|auto6}__::
     dhcp|on|any::: get ip from dhcp server from all interfaces. If root=dhcp,
     loop sequentially through all interfaces (eth0, eth1, ...) and use the first
     with a valid DHCP root-path.
@@ -446,8 +481,6 @@ USB Android phone::
 
     dhcp6::: IPv6 DHCP
 
-    ibft::: iBFT autoconfiguration
-
 **ip=**__<interface>__:__{dhcp|on|any|dhcp6|auto6}__[:[__<mtu>__][:__<macaddr>__]]::
     This parameter can be specified multiple times.
 +
@@ -472,6 +505,13 @@ cannot be used in conjunction with the **ifname** argument for the
 same <interface>.
 =====================
 
+**ip=**__<client-IP>__:[__<peer>__]:__<gateway-IP>__:__<netmask>__:__<client_hostname>__:__<interface>__:__{none|off|dhcp|on|any|dhcp6|auto6|ibft}__[:[__<dns1>__][:__<dns2>__]]::
+    explicit network configuration. If you want do define a IPv6 address, put it
+    in brackets (e.g. [2001:DB8::1]). This parameter can be specified multiple
+    times. __<peer>__ is optional and is the address of the remote endpoint
+    for pointopoint interfaces and it may be followed by a slash and a decimal
+    number, encoding the network prefix length.
+
 **ifname=**__<interface>__:__<MAC>__::
     Assign network device name <interface> (ie "bootnet") to the NIC with
     MAC <MAC>.
@@ -480,6 +520,19 @@ WARNING: Do **not** use the default kernel naming scheme for the interface name,
 as it can conflict with the kernel names. So, don't use "eth[0-9]+" for the
 interface name. Better name it "bootnet" or "bluesocket".
 
+**rd.route=**__<net>__/__<netmask>__:__<gateway>__[:__<interface>__]::
+    Add a static route with route options, which are separated by a colon.
+    IPv6 addresses have to be put in brackets.
++
+[listing]
+.Example
+--
+    rd.route=192.168.200.0/24:192.168.100.222:ens10
+    rd.route=192.168.200.0/24:192.168.100.222
+    rd.route=192.168.200.0/24::ens10
+    rd.route=[2001:DB8:3::/8]:[2001:DB8:2::1]:ens10
+--
+
 **bootdev=**__<interface>__::
     specify network interface to use routing and netroot information from.
     Required if multiple ip= lines are used.
@@ -493,6 +546,9 @@ interface name. Better name it "bootnet" or "bluesocket".
 **nameserver=**__<IP>__ [**nameserver=**__<IP>__ ...]::
     specify nameserver(s) to use
 
+**rd.peerdns=0**::
+    Disable DNS setting of DHCP parameters.
+
 **biosdevname=0**::
     boolean, turn off biosdevname network interface renaming
 
@@ -527,7 +583,7 @@ NFS
 ~~~
 **root=**\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__]::
     mount nfs share from <server-ip>:/<root-dir>, if no server-ip is given, use
-    dhcp next_server. if server-ip is an IPv6 address it has to be put in
+    dhcp next_server. If server-ip is an IPv6 address it has to be put in
     brackets, e.g. [2001:DB8::1]. NFS options can be appended with the prefix
     ":" or "," and are seperated by ",".
 
@@ -550,6 +606,31 @@ NFS
 **rd.nfs.domain=**__<NFSv4 domain name>__::
     Set the NFSv4 domain name. Will overwrite the settings in _/etc/idmap.conf_.
 
+**rd.net.dhcp.retry=**__<cnt>__::
+    If this option is set, dracut will try to connect via dhcp <cnt> times before failing.
+    Default is 1.
+
+**rd.net.timeout.dhcp=**__<arg>__::
+    If this option is set, dhclient is called with "-timeout <arg>".
+
+**rd.net.timeout.iflink=**__<seconds>__::
+    Wait <seconds> until link shows up. Default is 60 seconds.
+
+**rd.net.timeout.ifup=**__<seconds>__::
+    Wait <seconds> until link has state "UP". Default is 20 seconds.
+
+**rd.net.timeout.route=**__<seconds>__::
+    Wait <seconds> until route shows up. Default is 20 seconds.
+
+**rd.net.timeout.ipv6dad=**__<seconds>__::
+    Wait <seconds> until IPv6 DAD is finished. Default is 50 seconds.
+
+**rd.net.timeout.ipv6auto=**__<seconds>__::
+    Wait <seconds> until IPv6 automatic addresses are assigned. Default is 40 seconds.
+
+**rd.net.timeout.carrier=**__<seconds>__::
+    Wait <seconds> until carrier is recognized. Default is 5 seconds.
+
 CIFS
 ~~~
 **root=**cifs://[__<username>__[:__<password>__]@]__<server-ip>__:__<root-dir>__::
@@ -654,6 +735,15 @@ will result in
 iscsistart -b --param node.session.timeo.replacement_timeout=30
 --
 
+**rd.iscsi.ibft** **rd.iscsi.ibft=1**:
+    Turn on iBFT autoconfiguration for the interfaces
+
+**rd.iscsi.waitnet=0**:
+    Turn off waiting for all interfaces to be up before trying to login to the iSCSI targets.
+
+**rd.iscsi.testroute=0**:
+    Turn off checking, if the route to the iSCSI target IP is possible before trying to login.
+
 FCoE
 ~~~~
 **fcoe=**__<edd|interface|MAC>__:__{dcb|nodcb}__::
@@ -704,10 +794,164 @@ rd.znet=qeth,0.0.0600,0.0.0601,0.0.0602,layer2=1,portname=foo
 rd.znet=ctc,0.0.0600,0.0.0601,protocol=bar
 --
 
+Booting live images
+~~~~~~~~~~~~~~~~~~~
+Dracut offers multiple options for live booted images:
+
+=====================
+SquashFS with read-only filesystem image::: The system will boot with a read
+only filesystem from the SquashFS and apply a writable device-mapper snapshot
+over the read only filesystem.  Using this method ensures a relatively fast
+boot and lower RAM usage. Users **must be careful** to avoid writing too many
+blocks to the snapshot volume.  Once the blocks of the snapshot overlay are
+exhausted, the root filesystem becomes unusable and requires a reboot.  A
+persistent overlay is marked Invalid, and requires a difficult recovery.
+Non-persistent overlays default to 512 MiB in RAM, but the size can be adjusted
+with the **rd.live.overlay.size=** kernel command line option.
++
+The filesystem structure is expected to be:
++
+[listing]
+--
+squashfs.img          |  Squashfs from LiveCD .iso downloaded via network
+   !(mount)
+   /LiveOS
+       |- ext3fs.img  |  Filesystem image to mount read-only
+            !(mount)
+            /bin      |  Live filesystem
+            /boot     |
+            /dev      |
+            ...       |
+--
++
+Dracut uses this method of live booting by default.  No additional command line
+options are required other than **root=live:<URL>** to specify the location
+of your squashed filesystem.
++
+- The compressed SquashFS image can be copied during boot to RAM at
+`/run/initramfs/squashed.img` by using the **rd.live.ram=1** option.
+- A device with a persistent overlay can be booted read only by using the
+**rd.live.overlay.readonly** option on the kernel command line.  This will
+cause a temporary, writable overlay to be stacked over a read-only snapshot
+of the root filesystem.
++
+Uncompressed live filesystem image:::
+When the live system was installed with the '--skipcompress' option of the
+__livecd-iso-to-disk__ installation script for Live USB devices, the root
+filesystem image, `ext3fs.img`, is expanded on installation and no SquashFS
+is involved during boot.
++
+- If **rd.live.ram=1** is used in this situation, the full, uncompressed
+root filesystem is copied during boot to `/run/initramfs/rootfs.img` in the
+`/run` tmpfs.
++
+- If **rd.live.overlay=none** is provided as a kernel command line option,
+a writable, linear device-mapper target is created on boot with no overlay.
+
+writable filesystem image:::
+The system will retrieve a compressed filesystem image, extract it to
+`/run/initramfs/fsimg/rootfs.img`, connect it to a loop device, create a
+writable, linear device-mapper target at `/dev/mapper/live-rw`, and mount that
+as a writable volume at `/`.  More RAM is required during boot but the live
+filesystem is easier to manage if it becomes full.  Users can make a filesystem
+image of any size and that size will be maintained when the system boots. There
+is no persistence of root filesystem changes between boots with this option.
++
+The filesystem structure is expected to be:
++
+[listing]
+--
+rootfs.tgz            |  Compressed tarball containing fileystem image
+   !(unpack)
+   /rootfs.img        |  Filesystem image at /run/initramfs/fsimg/
+      !(mount)
+      /bin            |  Live filesystem
+      /boot           |
+      /dev            |
+      ...             |
+--
++
+To use this boot option, ensure that **rd.writable.fsimg=1** is in your kernel
+command line and add the **root=live:<URL>** to specify the location
+of your compressed filesystem image tarball or SquashFS image.
+=====================
+
+**rd.writable.fsimg=**1::
+Enables writable filesystem support.  The system will boot with a fully
+writable (but non-persistent) filesystem without snapshots __(see notes above
+about available live boot options)__.  You can use the **rootflags** option to
+set mount options for the live filesystem as well __(see documentation about
+rootflags in the **Standard** section above)__.
+This implies that the whole image is copied to RAM before the boot continues.
++
+NOTE: There must be enough free RAM available to hold the complete image.
++
+This method is very suitable for diskless boots.
+
+**root=**live:__<url>__::
+Boots a live image retrieved from __<url>__.  Valid handlers: __http, https, ftp, torrent, tftp__.
++
+[listing]
+.Example
+--
+root=live:http://example.com/liveboot.img
+root=live:ftp://ftp.example.com/liveboot.img
+root=live:torrent://example.com/liveboot.img.torrent
+--
+
+**rd.live.debug=**1::
+Enables debug output from the live boot process.
+
+**rd.live.dir=**__<path>__::
+Specifies the directory within the squashfs where the ext3fs.img or rootfs.img
+can be found.  By default, this is __LiveOS__.
+
+**rd.live.squashimg=**__<filename of SquashFS image>__::
+Specifies the filename for a SquashFS image of the root filesystem.
+By default, this is __squashfs.img__.
+
+**rd.live.ram=**1::
+Copy the complete image to RAM and use this for booting. This is useful
+when the image resides on, i.e., a DVD which needs to be ejected later on.
+
+**rd.live.overlay=**__<devspec>__:__(<pathspec>|auto)__|__none__::
+Allow the usage of a permanent overlay.
+- _<devspec>_ specifies the path to a device with a mountable filesystem.
+- _<pathspec>_ is the path to a file within that filesystem, which shall be
+used to persist the changes made to the device specified by the
+**root=live:__<url>__** option.
+- _none_ specifies no overlay when an uncompressed live root filesystem is
+available.
++
+[listing]
+.Example
+--
+rd.live.overlay=/dev/sdb1:persistent-overlay.img
+--
+
+**rd.live.overlay.size=**__<size_MiB>__::
+Specifies a non-persistent overlay size in MiB.  The default is _512_.
+
+**rd.live.overlay.readonly=**1::
+Specifies a non-persistent, writable snapshot overlay to be stacked over a
+read-only snapshot of the root filesystem, `/dev/mapper/live-ro`.
+
+**rd.live.overlay.reset=**1::
+Specifies that a persistent overlay should be reset on boot.  All root
+filesystem changes are vacated by this action.
+
+**rd.live.overlay.thin=**1::
+Enables the usage of thin snapshots instead of classic dm snapshots.
+The advantage of thin snapshots is that they support discards, and will free
+blocks that are not claimed by the filesystem. In this use case, this means
+that memory is given back to the kernel when the filesystem does not claim it
+anymore.
+
+
 Plymouth Boot Splash
 ~~~~~~~~~~~~~~~~~~~~
 **plymouth.enable=0**::
-    disable the plymouth bootsplash completly.
+    disable the plymouth bootsplash completely.
 
 **rd.plymouth=0**::
     disable the plymouth bootsplash only for the initramfs.
@@ -825,6 +1069,8 @@ rd_NO_MD:: rd.md=0
 
 rd_MD_UUID:: rd.md.uuid
 
+rd_NO_MULTIPATH: rd.multipath=0
+
 rd_NFS_DOMAIN:: rd.nfs.domain
 
 iscsi_initiator:: rd.iscsi.initiator

dracut.conf

@@ -1,51 +1,3 @@
-# PUT YOUR CONFIG HERE OR IN separate files named *.conf
-# in /etc/dracut.conf.d
-# SEE man dracut.conf(5)
-
-# Sample dracut config file
-
-#logfile=/var/log/dracut.log
-#fileloglvl=6
-
-# Exact list of dracut modules to use.  Modules not listed here are not going
-# to be included.  If you only want to add some optional modules use
-# add_dracutmodules option instead.
-#dracutmodules+=""
-
-# dracut modules to omit
-#omit_dracutmodules+=""
-
-# dracut modules to add to the default
-#add_dracutmodules+=""
-
-# additional kernel modules to the default
-#add_drivers+=""
-
-# list of kernel filesystem modules to be included in the generic initramfs
-#filesystems+=""
-
-# build initrd only to boot current hardware
-#hostonly="yes"
-#
-
-# install local /etc/mdadm.conf
-#mdadmconf="no"
-
-# install local /etc/lvm/lvm.conf
-#lvmconf="no"
-
-# A list of fsck tools to install. If it's not specified, module's hardcoded
-# default is used, currently: "umount mount /sbin/fsck* xfs_db xfs_check
-# xfs_repair e2fsck jfs_fsck reiserfsck btrfsck". The installation is
-# opportunistic, so non-existing tools are just ignored.
-#fscks=""
-
-# inhibit installation of any fsck tools
-#nofscks="yes"
-
-# mount / and /usr read-only by default
-#ro_mnt="no"
-
-# set the directory for temporary files
-# default: /var/tmp
-#tmpdir=/tmp
+# PUT YOUR CONFIG IN separate files
+# in /etc/dracut.conf.d named "<name>.conf"
+# SEE man dracut.conf(5) for options

dracut.conf.5.asc

@@ -10,7 +10,8 @@ dracut.conf - configuration file(s) for dracut
 
 SYNOPSIS
 --------
-_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_
+_/etc/dracut.conf_
+_/etc/dracut.conf.d/\*.conf_
 _/usr/lib/dracut/dracut.conf.d/*.conf_
 
 Description
@@ -30,15 +31,19 @@ dracut command line options will overwrite any values set here.
 
 Configuration files must have the extension .conf; other extensions are ignored.
 
+*add_dracutmodules+=*" __<dracut modules>__ "::
+    Add a space-separated list of dracut modules to call when building the
+    initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
+
 *dracutmodules+=*" __<dracut modules>__ "::
     Specify a space-separated list of dracut modules to call when building the
     initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
+    This option forces dracut to only include the specified dracut modules.
+    In most cases the "add_dracutmodules" option is what you want to use.
 
 *omit_dracutmodules+=*" __<dracut modules>__ "::
-    Omit a space-separated list of dracut modules.
-
-*add_dracutmodules+=*" __<dracut modules>__ "::
-    Add a space-separated list of dracut modules.
+    Omit a space-separated list of dracut modules to call when building the
+    initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
 
 *drivers+=*" __<kernel modules>__ "::
     Specify a space-separated list of kernel modules to exclusively include in
@@ -49,6 +54,10 @@ Configuration files must have the extension .conf; other extensions are ignored.
     Specify a space-separated list of kernel modules to add to the initramfs.
     The kernel modules have to be specified without the ".ko" suffix.
 
+*force_drivers+=*" __<list of kernel modules>__ "::
+    See add_drivers above. But in this case it is ensured that the drivers
+    are tried to be loaded early via modprobe.
+
 *omit_drivers+=*" __<kernel modules>__ "::
     Specify a space-separated list of kernel modules not to add to the
     initramfs. The kernel modules have to be specified without the ".ko" suffix.
@@ -66,6 +75,17 @@ Configuration files must have the extension .conf; other extensions are ignored.
 *install_items+=*" __<file>__[ __<file>__ ...] "::
     Specify additional files to include in the initramfs, separated by spaces.
 
+*install_optional_items+=*" __<file>__[ __<file>__ ...] "::
+    Specify additional files to include in the initramfs, separated by spaces,
+    if they exist.
+
+*compress=*"__{bzip2|lzma|xz|gzip|lzo|lz4|<compressor [args ...]>}__"::
+    Compress the generated initramfs using the passed compression program. If
+    you pass it just the name of a compression program, it will call that
+    program with known-working arguments. If you pass arguments, it will be called
+    with exactly those arguments. Depending on what you pass, this may result in
+    an initramfs that the kernel cannot decompress.
+
 *do_strip=*"__{yes|no}__"::
     Strip binaries in the initramfs (default=yes)
 
@@ -76,6 +96,9 @@ Configuration files must have the extension .conf; other extensions are ignored.
     Host-Only mode: Install only what is needed for booting the local host
     instead of a generic host and generate host-specific configuration.
 
+*hostonly_cmdline=*"__{yes|no}__"::
+    If set, store the kernel command line arguments needed in the initramfs
+
 *persistent_policy=*"__<policy>__"::
     Use _<policy>_ to address disks and partitions.
     _<policy>_ can be any directory name found in /dev/disk.
@@ -172,6 +195,22 @@ provide a valid _/etc/fstab_.
 *i18n_install_all=*"__{yes|no}__"::
     Install everything regardless of generic or hostonly mode.
 
+*reproducible=*"__{yes|no}__"::
+    Create reproducible images.
+
+*loginstall=*"__<DIR>__"::
+    Log all files installed from the host to _<DIR>_.
+
+*uefi_stub=*"_<FILE>_"::
+    Specifies the UEFI stub loader, which will load the attached kernel, initramfs and
+    kernel command line and boots the kernel. The default is
+    _/lib/systemd/boot/efi/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+    or _/usr/lib/gummiboot/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+
+*kernel_image=*"_<FILE>_"::
+    Specifies the kernel image, which to include in the UEFI executable. The default is
+    _/lib/modules/<KERNEL-VERSION>/vmlinuz_ or _/boot/vmlinuz-<KERNEL-VERSION>_
+
 Files
 -----
 _/etc/dracut.conf_::

dracut.conf.d/fedora.conf.example

@@ -2,14 +2,19 @@
 
 # i18n
 i18n_vars="/etc/sysconfig/keyboard:KEYTABLE-KEYMAP /etc/sysconfig/i18n:SYSFONT-FONT,FONTACM-FONT_MAP,FONT_UNIMAP"
-i18n_default_font="latarcyrheb-sun16"
+i18n_default_font="eurlatgr"
 i18n_install_all="yes"
+
+
 stdloglvl=3
 sysloglvl=5
-install_items+=" vi /etc/virc ps grep cat rm "
+install_optional_items+=" vi /etc/virc ps grep cat rm "
 prefix="/"
 systemdutildir=/usr/lib/systemd
 systemdsystemunitdir=/usr/lib/systemd/system
 systemdsystemconfdir=/etc/systemd/system
 udevdir=/usr/lib/udev
 hostonly="yes"
+hostonly_cmdline="no"
+early_microcode="yes"
+reproducible="yes"

dracut.conf.d/suse.conf.example

@@ -1,3 +1,24 @@
+# SUSE specifc dracut settings
+#
+# SUSE by default always builds a as small as possible initrd for performance
+# and resource reasons.
+# If you like to build a generic initrd which works on other platforms than
+# on the one dracut/mkinitrd got called comment out below setting(s).
+hostonly="yes"
+hostonly_cmdline="yes"
+
+compress="xz -0 --check=crc32 --memlimit-compress=50%"
+
 i18n_vars="/etc/sysconfig/language:RC_LANG-LANG,RC_LC_ALL-LC_ALL /etc/sysconfig/console:CONSOLE_UNICODEMAP-FONT_UNIMAP,CONSOLE_FONT-FONT,CONSOLE_SCREENMAP-FONT_MAP /etc/sysconfig/keyboard:KEYTABLE-KEYMAP"
 omit_drivers+=" i2o_scsi"
 
+# Below adds additional tools to the initrd which are not urgently necessary to
+# bring up the system, but help to debug problems.
+# See /usr/lib/dracut/modules.d/95debug/module-setup.sh which additional tools
+# are installed and add more if you need them. This specifically helps if you
+# use:
+# rd.break=[cmdline|pre-udev|pre-trigger|initqueue|pre-mount|
+# mount|pre-pivot|cleanup]
+# boot parameter or if you are forced to enter the dracut emergency shell.
+
+# add_dracutmodules+=debug

dracut.modules.7.asc

@@ -19,7 +19,7 @@ you can replace init with your own version of _99base_, this is not encouraged.
 Instead you should use, if possible, the hooks of dracut. All hooks, and the
 point of time in which they are executed, are described in <<stages>>.
 
-The main script, which creates the initramfs is dracut itsself. It parses all
+The main script, which creates the initramfs is dracut itself. It parses all
 arguments and sets up the directory, in which everything is installed. It then
 executes all check, install, installkernel scripts found in the modules, which
 are to be processed. After everything is installed, the install directory is

dracut.spec

@@ -1,6 +1,11 @@
 %define dracutlibdir %{_prefix}/lib/dracut
 %bcond_without doc
 
+# We ship a .pc file but don't want to have a dep on pkg-config. We
+# strip the automatically generated dep here and instead co-own the
+# directory.
+%global __requires_exclude pkg-config
+
 # Variables must be defined
 %define with_nbd                1
 
@@ -30,6 +35,8 @@ URL: https://dracut.wiki.kernel.org/
 # Source can be generated by
 # http://git.kernel.org/?p=boot/dracut/dracut.git;a=snapshot;h=%{version};sf=tgz
 Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.xz
+Source1: https://www.gnu.org/licenses/lgpl-2.1.txt
+
 
 BuildRequires: bash git
 
@@ -58,7 +65,6 @@ BuildRequires: docbook-style-xsl docbook-dtds libxslt
 BuildRequires: asciidoc
 %endif
 
-
 %if 0%{?fedora} > 12 || 0%{?rhel}
 # no "provides", because dracut does not offer
 # all functionality of the obsoleted packages
@@ -90,15 +96,25 @@ Requires: cpio
 Requires: filesystem >= 2.1.0
 Requires: findutils
 Requires: grep
-Requires: hardlink
-Requires: gzip xz
 Requires: kmod
 Requires: sed
+Requires: xz
+Requires: gzip
+
+%if 0%{?fedora} > 22
+Recommends: grubby
+Recommends: hardlink
+Recommends: pigz
+Recommends: kpartx
+%else
+Requires: hardlink
+Requires: gzip
 Requires: kpartx
+%endif
 
 %if 0%{?fedora} || 0%{?rhel} > 6
 Requires: util-linux >= 2.21
-Requires: systemd >= 199
+Requires: systemd >= 219
 Requires: procps-ng
 Conflicts: grubby < 8.23
 Conflicts: initscripts < 8.63-1
@@ -166,6 +182,16 @@ Requires: libcap
 This package requires everything which is needed to build an
 initramfs with dracut, which drops capabilities.
 
+%package live
+Summary: dracut modules to build a dracut initramfs with live image capabilities
+Requires: %{name} = %{version}-%{release}
+Requires: %{name}-network = %{version}-%{release}
+Requires: tar gzip coreutils bash device-mapper curl
+
+%description live
+This package requires everything which is needed to build an
+initramfs with dracut, with live image capabilities, like Live CDs.
+
 %package config-generic
 Summary: dracut configuration to turn off hostonly image generation
 Requires: %{name} = %{version}-%{release}
@@ -193,18 +219,8 @@ Requires: %{name} = %{version}-%{release}
 This package contains tools to assemble the local initrd and host configuration.
 
 %prep
-%setup -q -n %{name}-%{version}
-
-%if %{defined PATCH1}
-git init
-git config user.email "dracut-maint@redhat.com"
-git config user.name "Fedora dracut team"
-git add .
-git commit -a -q -m "%{version} baseline."
-
-# Apply all the patches.
-git am -p1 %{patches}
-%endif
+%autosetup -n %{name}-%{version} -S git_am
+cp %{SOURCE1} .
 
 %build
 %configure --systemdsystemunitdir=%{_unitdir} --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) --libdir=%{_prefix}/lib \
@@ -283,21 +299,17 @@ echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/
 > $RPM_BUILD_ROOT/etc/system-fips
 %endif
 
-# create compat symlink
-mkdir -p $RPM_BUILD_ROOT%{_sbindir}
-ln -sr $RPM_BUILD_ROOT%{_bindir}/dracut $RPM_BUILD_ROOT%{_sbindir}/dracut
-
 %clean
 rm -rf -- $RPM_BUILD_ROOT
 
 %files
 %defattr(-,root,root,0755)
 %if %{with doc}
-%doc README HACKING TODO COPYING AUTHORS NEWS dracut.html dracut.png dracut.svg
+%doc README HACKING TODO AUTHORS NEWS dracut.html dracut.png dracut.svg
 %endif
+%{!?_licensedir:%global license %%doc}
+%license COPYING lgpl-2.1.txt
 %{_bindir}/dracut
-# compat symlink
-%{_sbindir}/dracut
 %{_datadir}/bash-completion/completions/dracut
 %{_datadir}/bash-completion/completions/lsinitrd
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
@@ -307,6 +319,7 @@ rm -rf -- $RPM_BUILD_ROOT
 %dir %{dracutlibdir}
 %dir %{dracutlibdir}/modules.d
 %{dracutlibdir}/dracut-functions.sh
+%{dracutlibdir}/dracut-init.sh
 %{dracutlibdir}/dracut-functions
 %{dracutlibdir}/dracut-version.sh
 %{dracutlibdir}/dracut-logger.sh
@@ -319,6 +332,8 @@ rm -rf -- $RPM_BUILD_ROOT
 %endif
 %dir %{_sysconfdir}/dracut.conf.d
 %dir %{dracutlibdir}/dracut.conf.d
+%dir %{_datadir}/pkgconfig
+%{_datadir}/pkgconfig/dracut.pc
 
 %if %{with doc}
 %{_mandir}/man8/dracut.8*
@@ -340,6 +355,8 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/00bootchart
 %endif
 %{dracutlibdir}/modules.d/00bash
+%{dracutlibdir}/modules.d/00systemd
+%{dracutlibdir}/modules.d/01systemd-initrd
 %{dracutlibdir}/modules.d/03modsign
 %{dracutlibdir}/modules.d/03rescue
 %{dracutlibdir}/modules.d/04watchdog
@@ -354,7 +371,6 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/90crypt
 %{dracutlibdir}/modules.d/90dm
 %{dracutlibdir}/modules.d/90dmraid
-%{dracutlibdir}/modules.d/90dmsquash-live
 %{dracutlibdir}/modules.d/90kernel-modules
 %{dracutlibdir}/modules.d/90lvm
 %{dracutlibdir}/modules.d/90mdraid
@@ -384,17 +400,16 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/98pollcdrom
 %{dracutlibdir}/modules.d/98selinux
 %{dracutlibdir}/modules.d/98syslog
-%{dracutlibdir}/modules.d/98systemd
+%{dracutlibdir}/modules.d/98dracut-systemd
 %{dracutlibdir}/modules.d/98usrmount
 %{dracutlibdir}/modules.d/99base
 %{dracutlibdir}/modules.d/99fs-lib
-%{dracutlibdir}/modules.d/99img-lib
 %{dracutlibdir}/modules.d/99shutdown
 %attr(0644,root,root) %ghost %config(missingok,noreplace) %{_localstatedir}/log/dracut.log
 %dir %{_sharedstatedir}/initramfs
 %if %{defined _unitdir}
 %{_unitdir}/dracut-shutdown.service
-%{_unitdir}/shutdown.target.wants/dracut-shutdown.service
+%{_unitdir}/sysinit.target.wants/dracut-shutdown.service
 %{_unitdir}/dracut-cmdline.service
 %{_unitdir}/dracut-initqueue.service
 %{_unitdir}/dracut-mount.service
@@ -417,10 +432,11 @@ rm -rf -- $RPM_BUILD_ROOT
 
 %files network
 %defattr(-,root,root,0755)
+%{dracutlibdir}/modules.d/02systemd-networkd
 %{dracutlibdir}/modules.d/40network
+%{dracutlibdir}/modules.d/90kernel-network-modules
 %{dracutlibdir}/modules.d/95fcoe
 %{dracutlibdir}/modules.d/95iscsi
-%{dracutlibdir}/modules.d/90livenet
 %{dracutlibdir}/modules.d/90qemu-net
 %{dracutlibdir}/modules.d/95cifs
 %{dracutlibdir}/modules.d/95nbd
@@ -441,17 +457,18 @@ rm -rf -- $RPM_BUILD_ROOT
 
 %files fips-aesni
 %defattr(-,root,root,0755)
-
-%if %{with doc}
-%doc COPYING
-%endif
-
 %{dracutlibdir}/modules.d/02fips-aesni
 
 %files caps
 %defattr(-,root,root,0755)
 %{dracutlibdir}/modules.d/02caps
 
+%files live
+%defattr(-,root,root,0755)
+%{dracutlibdir}/modules.d/99img-lib
+%{dracutlibdir}/modules.d/90dmsquash-live
+%{dracutlibdir}/modules.d/90livenet
+
 %files tools
 %defattr(-,root,root,0755)
 

dracut.usage.asc

@@ -99,10 +99,6 @@ raid with encryption and LVM on top), as long as you specify the correct
 filesystem LABEL or UUID on the kernel command line for your root device, dracut
 will find it and boot from it.
 
-The kernel command line usually can be configured in _/boot/grub/grub.conf_, if
-grub is your bootloader and it also can be edited in the real boot process in
-the grub menu.
-
 The kernel command line can also be provided by the dhcp server with the
 root-path option. See <<NetworkBoot>>.
 
@@ -209,7 +205,7 @@ be specified once.
 ----
 # mkdir -p rd.live.overlay/etc/cmdline.d
 # mkdir -p rd.live.overlay/etc/conf.d
-# echo "ip=auto" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
+# echo "ip=dhcp" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
 # echo export FOO=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
 # echo export BAR=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
 # tree rd.live.overlay/
@@ -246,22 +242,7 @@ specified multiple times.
 If your root partition is on a network drive, you have to have the network
 dracut modules installed to create a network aware initramfs image.
 
-On a Red Hat Enterprise Linux or Fedora system, this means, you have to install
-the _dracut-network_ rpm package:
-
-
-----
-# yum install dracut-network
-----
-
-The resulting initramfs image can be served by a boot manager residing on your
-local hard drive or it can be served by a PXE/TFTP server.
-
-How to setup your PXE/TFTP server can be found in the
-http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
-Hat Enterprise Linux Storage Administration Guide].
-
-If you specify ip=auto on the kernel command line, then dracut asks a dhcp
+If you specify ip=dhcp on the kernel command line, then dracut asks a dhcp
 server about the ip adress for the machine. The dhcp server can also serve an
 additional root-path, which will set the root device for dracut. With this
 mechanism, you have static configuration on your client machine and a
@@ -300,7 +281,7 @@ This will reduce the size of the initramfs image significantly.
 If the boot process does not succeed, you have several options to debug the
 situation. Some of the basic operations are covered here. For more information
 you should also visit:
-http://fedoraproject.org/wiki/How_to_debug_Dracut_problems
+https://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html
 
 
 [[identifying-your-problem-area]]
@@ -325,7 +306,7 @@ stick and mount that. Then you can store the output for later inspection.
 In all cases, the following should be mentioned and attached to your bug report:
 
 * The exact kernel command-line used. Typically from the bootloader
-configuration file (e.g. _/etc/grub.conf_) or from _/proc/cmdline_.
+configuration file (e.g. _/boot/grub2/grub.cfg_) or from _/proc/cmdline_.
 * A copy of your disk partition information from _/etc/fstab_, which might be
 obtained booting an old working initramfs or a rescue medium.
 * Turn on dracut debugging (see _the 'debugging dracut' section_), and attach
@@ -360,7 +341,7 @@ logging during the system boot.  This section documents configuring a
 serial console connection to record boot messages.
 
 . First, enable serial console output for both the kernel and the bootloader.
-. Open the file _/etc/grub.conf_ for editing. Below the line ''timeout=5'', add
+. Open the file _/boot/grub2/grub.cfg_ for editing. Below the line ''timeout=5'', add
 the following:
 +
 ----
@@ -368,14 +349,14 @@ serial --unit=0 --speed=9600
 terminal --timeout=5 serial console
 ----
 +
-. Also in _/etc/grub.conf_, add the following boot arguemnts to the ''kernel''
+. Also in _/boot/grub2/grub.cfg_, add the following boot arguemnts to the ''kernel''
 line:
 +
 ----
 console=tty0 console=ttyS0,9600
 ----
 +
-. When finished, the _/etc/grub.conf_ file should look similar to the example
+. When finished, the _/boot/grub2/grub.cfg_ file should look similar to the example
 below.
 +
 ----
@@ -410,10 +391,10 @@ dracut offers a shell for interactive debugging in the event dracut fails to
 locate your root filesystem. To enable the shell:
 
 . Add the boot parameter ''rd.shell'' to your bootloader configuration file
-(e.g. _/etc/grub.conf_)
+(e.g. _/boot/grub2/grub.cfg_)
 . Remove the boot arguments ''rhgb'' and ''quiet''
 +
-A sample _/etc/grub.conf_ bootloader configuration file is listed below.
+A sample _/boot/grub2/grub.cfg_ bootloader configuration file is listed below.
 +
 ----
 default=0
@@ -528,7 +509,7 @@ on _pre-shutdown_ or _shutdown_.
 To do this from an already booted system:
 ----
 # mkdir -p /run/initramfs/etc/cmdline.d
-# echo "rd.break=pre-shutdown" > /run/initramfs/etc/cmdline.d/debug.conf
+# echo "rd.debug rd.break=pre-shutdown rd.break=shutdown" > /run/initramfs/etc/cmdline.d/debug.conf
 # touch /run/initramfs/.need_shutdown
 ----
 

install/.kateconfig

@@ -0,0 +1 @@
+kate: space-indent on; tab-width 8; indent-width 8; replace-tabs on; eol unix;

install/dracut-install.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /* dracut-install.c  -- install files and executables
 
    Copyright (C) 2012 Harald Hoyer
@@ -53,8 +51,11 @@ static bool arg_optional = false;
 static bool arg_all = false;
 static bool arg_resolvelazy = false;
 static bool arg_resolvedeps = false;
+static bool arg_hostonly = false;
 static char *destrootdir = NULL;
-
+static char *logdir = NULL;
+static char *logfile = NULL;
+FILE *logfile_f = NULL;
 static Hashmap *items = NULL;
 static Hashmap *items_failed = NULL;
 
@@ -221,7 +222,8 @@ static int cp(const char *src, const char *dst)
                 if (ret == 0) {
                         struct timeval tv[2];
                         if (fchown(dest_desc, sb.st_uid, sb.st_gid) != 0)
-                                fchown(dest_desc, (__uid_t) - 1, sb.st_gid);
+                                if(fchown(dest_desc, (uid_t) - 1, sb.st_gid) != 0)
+                                    log_error("Failed to chown %s: %m", dst);
                         tv[0].tv_sec = sb.st_atime;
                         tv[0].tv_usec = 0;
                         tv[1].tv_sec = sb.st_mtime;
@@ -327,18 +329,25 @@ static int resolve_deps(const char *src)
 {
         int ret = 0;
 
-        _cleanup_free_ char *buf = malloc(LINE_MAX);
+        _cleanup_free_ char *buf = NULL;
         size_t linesize = LINE_MAX;
         _cleanup_pclose_ FILE *fptr = NULL;
         _cleanup_free_ char *cmd = NULL;
 
+	buf = malloc(LINE_MAX);
+	if (buf == NULL)
+		return -errno;
+
         if (strstr(src, ".so") == 0) {
                 _cleanup_close_ int fd = -1;
                 fd = open(src, O_RDONLY | O_CLOEXEC);
                 if (fd < 0)
                         return -errno;
 
-                read(fd, buf, LINE_MAX);
+                ret = read(fd, buf, LINE_MAX);
+                if (ret == -1)
+                        return -errno;
+
                 buf[LINE_MAX - 1] = '\0';
                 if (buf[0] == '#' && buf[1] == '!') {
                         /* we have a shebang */
@@ -366,7 +375,7 @@ static int resolve_deps(const char *src)
         fptr = popen(cmd, "r");
 
         while (!feof(fptr)) {
-                char *p, *q;
+                char *p;
 
                 if (getline(&buf, &linesize, fptr) <= 0)
                         continue;
@@ -379,6 +388,11 @@ static int resolve_deps(const char *src)
                         break;
                 }
 
+		/* musl ldd */
+		if (strstr(buf, "Not a valid dynamic program"))
+			break;
+
+		/* glibc */
                 if (strstr(buf, "not a dynamic executable"))
                         break;
 
@@ -400,6 +414,8 @@ static int resolve_deps(const char *src)
 
                 p = strchr(p, '/');
                 if (p) {
+                        char *q;
+
                         for (q = p; *q && *q != ' ' && *q != '\n'; q++) ;
                         *q = '\0';
 
@@ -467,6 +483,36 @@ static int hmac_install(const char *src, const char *dst, const char *hmacpath)
         return 0;
 }
 
+void mark_hostonly(const char *path)
+{
+        _cleanup_free_ char *fulldstpath = NULL;
+        _cleanup_fclose_ FILE *f = NULL;
+        int ret;
+
+        ret = asprintf(&fulldstpath, "%s/lib/dracut/hostonly-files", destrootdir);
+        if (ret < 0) {
+                log_error("Out of memory!");
+                exit(EXIT_FAILURE);
+        }
+
+        f = fopen(fulldstpath, "a");
+
+        if (f == NULL) {
+                log_error("Could not open '%s' for writing.", fulldstpath);
+                return;
+        }
+
+        fprintf(f, "%s\n", path);
+}
+
+void dracut_log_cp(const char *path)
+{
+        int ret;
+        ret = fprintf(logfile_f, "%s\n", path);
+        if (ret < 0)
+                log_error("Could not append '%s' to logfile '%s': %m", path, logfile);
+}
+
 static int dracut_install(const char *src, const char *dst, bool isdir, bool resolvedeps, bool hashdst)
 {
         struct stat sb, db;
@@ -628,7 +674,13 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
 
         log_debug("dracut_install ret = %d", ret);
         log_info("cp '%s' '%s'", src, fulldstpath);
+
+        if (arg_hostonly)
+                mark_hostonly(dst);
+
         ret += cp(src, fulldstpath);
+        if (ret == 0 && logfile_f)
+                dracut_log_cp(src);
 
         log_debug("dracut_install ret = %d", ret);
 
@@ -654,9 +706,11 @@ static void usage(int status)
                "  -o --optional       If SOURCE does not exist, do not fail\n"
                "  -d --dir            SOURCE is a directory\n"
                "  -l --ldd            Also install shebang executables and libraries\n"
+               "  -L --logdir <DIR>   Log files, which were installed from the host to <DIR>\n"
                "  -R --resolvelazy    Only install shebang executables and libraries\n"
                "                      for all SOURCE files\n"
-               "  -H --fips           Also install all '.SOURCE.hmac' files\n"
+               "  -H --hostonly       Mark all SOURCE files as hostonly\n\n"
+               "  -f --fips           Also install all '.SOURCE.hmac' files\n"
                "  -v --verbose        Show more output\n"
                "     --debug          Show debug output\n"
                "     --version        Show package version\n"
@@ -706,13 +760,15 @@ static int parse_argv(int argc, char *argv[])
                 {"ldd", no_argument, NULL, 'l'},
                 {"resolvelazy", no_argument, NULL, 'R'},
                 {"optional", no_argument, NULL, 'o'},
+                {"hostonly", no_argument, NULL, 'H'},
                 {"all", no_argument, NULL, 'a'},
-                {"fips", no_argument, NULL, 'H'},
+                {"fips", no_argument, NULL, 'f'},
                 {"destrootdir", required_argument, NULL, 'D'},
+                {"logdir", required_argument, NULL, 'L'},
                 {NULL, 0, NULL, 0}
         };
 
-        while ((c = getopt_long(argc, argv, "adhloD:HR", options, NULL)) != -1) {
+        while ((c = getopt_long(argc, argv, "adfhlL:oD:HR", options, NULL)) != -1) {
                 switch (c) {
                 case ARG_VERSION:
                         puts(PROGRAM_VERSION_STRING);
@@ -741,9 +797,15 @@ static int parse_argv(int argc, char *argv[])
                 case 'D':
                         destrootdir = strdup(optarg);
                         break;
-                case 'H':
+                case 'L':
+                        logdir = strdup(optarg);
+                        break;
+                case 'f':
                         arg_hmac = true;
                         break;
+                case 'H':
+                        arg_hostonly = true;
+                        break;
                 case 'h':
                         usage(EXIT_SUCCESS);
                         break;
@@ -846,9 +908,9 @@ static int install_one(const char *src, const char *dst)
         int ret = 0;
 
         if (strchr(src, '/') == NULL) {
-                char **q = NULL;
                 char **p = find_binary(src);
                 if (p) {
+			char **q = NULL;
                         STRV_FOREACH(q, p) {
                                 char *newsrc = *q;
                                 log_debug("dracut_install '%s' '%s'", newsrc, dst);
@@ -882,9 +944,9 @@ static int install_all(int argc, char **argv)
                 log_debug("Handle '%s'", argv[i]);
 
                 if (strchr(argv[i], '/') == NULL) {
-                        char **q = NULL;
                         char **p = find_binary(argv[i]);
                         if (p) {
+				char **q = NULL;
                                 STRV_FOREACH(q, p) {
                                         char *newsrc = *q;
                                         log_debug("dracut_install '%s'", newsrc);
@@ -962,6 +1024,23 @@ int main(int argc, char **argv)
                 goto finish;
         }
 
+        if (logdir) {
+                int ret;
+
+                ret = asprintf(&logfile, "%s/%d.log", logdir, getpid());
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
+
+                logfile_f = fopen(logfile, "a");
+                if (logfile_f == NULL) {
+                        log_error("Could not open %s for logging: %m", logfile);
+                        r = EXIT_FAILURE;
+                        goto finish;
+                }
+        }
+
         r = EXIT_SUCCESS;
 
         if (((optind + 1) < argc) && (strcmp(argv[optind + 1], destrootdir) == 0)) {
@@ -990,6 +1069,8 @@ int main(int argc, char **argv)
                 r = EXIT_SUCCESS;
 
  finish:
+        if (logfile_f)
+                fclose(logfile_f);
 
         while ((i = hashmap_steal_first(items)))
                 item_free(i);

install/hashmap.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 

install/hashmap.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef foohashmaphfoo
 #define foohashmaphfoo
 

install/log.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 
@@ -103,11 +101,10 @@ void log_set_facility(int facility) {
 static int write_to_console(
                 int level,
                 const char*file,
-                int line,
+                unsigned int line,
                 const char *func,
                 const char *buffer) {
 
-        char location[64];
         struct iovec iovec[5];
         unsigned n = 0;
 
@@ -119,7 +116,9 @@ static int write_to_console(
         IOVEC_SET_STRING(iovec[n++], "dracut-install: ");
 
         if (show_location) {
-                snprintf(location, sizeof(location), "(%s:%u) ", file, line);
+                char location[64];
+                if (snprintf(location, sizeof(location), "(%s:%u) ", file, line) <= 0)
+                        return -errno;
                 IOVEC_SET_STRING(iovec[n++], location);
         }
 

install/log.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef foologhfoo
 #define foologhfoo
 

install/macro.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #pragma once
 
 /***
@@ -207,7 +205,7 @@ static inline size_t IOVEC_INCREMENT(struct iovec *i, unsigned n, size_t k) {
         for (j = 0; j < n; j++) {
                 size_t sub;
 
-                if (_unlikely_(k <= 0))
+                if (_unlikely_(k == 0))
                         break;
 
                 sub = MIN(i[j].iov_len, k);

install/strv.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 
@@ -84,7 +82,7 @@ char **strv_copy(char * const *l) {
         return r;
 }
 
-unsigned strv_length(char * const *l) {
+unsigned int strv_length(char * const *l) {
         unsigned n = 0;
 
         if (!l)
@@ -299,7 +297,7 @@ char **strv_split_quoted(const char *s) {
 
 char **strv_split_newlines(const char *s) {
         char **l;
-        unsigned n;
+        unsigned int n;
 
         assert(s);
 
@@ -311,7 +309,7 @@ char **strv_split_newlines(const char *s) {
                 return NULL;
 
         n = strv_length(l);
-        if (n <= 0)
+        if (n == 0)
                 return l;
 
         if (isempty(l[n-1])) {
@@ -491,9 +489,9 @@ char **strv_parse_nulstr(const char *s, size_t l) {
         unsigned c = 0, i = 0;
         char **v;
 
-        assert(s || l <= 0);
+        assert(s || l == 0);
 
-        if (l <= 0)
+        if (l == 0)
                 return new0(char*, 1);
 
         for (p = s; p < s + l; p++)

install/strv.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #pragma once
 
 /***
@@ -34,7 +32,7 @@ DEFINE_TRIVIAL_CLEANUP_FUNC(char**, strv_free);
 #define _cleanup_strv_free_ _cleanup_(strv_freep)
 
 char **strv_copy(char * const *l);
-unsigned strv_length(char * const *l) _pure_;
+unsigned int strv_length(char * const *l) _pure_;
 
 char **strv_merge(char **a, char **b);
 char **strv_merge_concat(char **a, char **b, const char *suffix);

install/util.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 
@@ -224,7 +222,7 @@ char *strappend(const char *s, const char *suffix) {
 char *strjoin(const char *x, ...) {
         va_list ap;
         size_t l;
-        char *r, *p;
+        char *r;
 
         va_start(ap, x);
 
@@ -257,6 +255,8 @@ char *strjoin(const char *x, ...) {
                 return NULL;
 
         if (x) {
+                char *p;
+
                 p = stpcpy(r, x);
 
                 va_start(ap, x);

install/util.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef fooutilhfoo
 #define fooutilhfoo
 
@@ -22,6 +20,8 @@
   along with systemd; If not, see <http://www.gnu.org/licenses/>.
 ***/
 
+#define _GNU_SOURCE
+
 #include <inttypes.h>
 #include <time.h>
 #include <sys/time.h>
@@ -29,6 +29,7 @@
 #include <stdbool.h>
 #include <stdlib.h>
 #include <stdio.h>
+#include <string.h>
 #include <signal.h>
 #include <sched.h>
 #include <limits.h>

lsinitrd-bash-completion.sh

@@ -1,7 +1,4 @@
 #
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-#
 # Copyright 2013 Red Hat, Inc.  All rights reserved.
 #
 # This program is free software; you can redistribute it and/or modify

lsinitrd.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Copyright 2005-2010 Harald Hoyer <harald@redhat.com>
 # Copyright 2005-2010 Red Hat, Inc.  All rights reserved.
@@ -27,6 +25,7 @@ usage()
         echo
         echo "-h, --help                  print a help message and exit."
         echo "-s, --size                  sort the contents of the initramfs by size."
+        echo "-m, --mod                   list modules."
         echo "-f, --file <filename>       print the contents of <filename>."
         echo "-k, --kver <kernel version> inspect the initramfs of <kernel version>."
         echo
@@ -37,13 +36,15 @@ usage()
 [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
 
 sorted=0
+modules=0
 declare -A filenames
 
 unset POSIXLY_CORRECT
 TEMP=$(getopt \
-    -o "shf:k:" \
+    -o "shmf:k:" \
     --long kver: \
     --long file: \
+    --long mod \
     --long help \
     --long size \
     -- "$@")
@@ -61,6 +62,7 @@ while (($# > 0)); do
         -f|--file)  filenames[${2#/}]=1; shift;;
         -s|--size)  sorted=1;;
         -h|--help)  usage; exit 0;;
+        -m|--mod)   modules=1;;
         --)         shift;break;;
         *)          usage; exit 1;;
     esac
@@ -106,10 +108,16 @@ if ! [[ -f "$image" ]]; then
     exit 1
 fi
 
+dracutlibdirs() {
+    for d in lib64/dracut lib/dracut usr/lib64/dracut usr/lib/dracut; do
+        echo "$d/$1"
+    done
+}
+
 extract_files()
 {
     (( ${#filenames[@]} == 1 )) && nofileinfo=1
-    for f in ${!filenames[@]}; do
+    for f in "${!filenames[@]}"; do
         [[ $nofileinfo ]] || echo "initramfs:/$f"
         [[ $nofileinfo ]] || echo "========================================================================"
         $CAT $image | cpio --extract --verbose --quiet --to-stdout $f 2>/dev/null
@@ -119,6 +127,14 @@ extract_files()
     done
 }
 
+list_modules()
+{
+    echo "dracut modules:"
+    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+        $(dracutlibdirs modules.txt) 2>/dev/null
+    ((ret+=$?))
+}
+
 list_files()
 {
     echo "========================================================================"
@@ -133,7 +149,7 @@ list_files()
 
 
 if (( ${#filenames[@]} <= 0 )); then
-    echo "Image: $image: $(du -h $image | while read a b; do echo $a;done)"
+    echo "Image: $image: $(du -h $image | while read a b || [ -n "$a" ]; do echo $a;done)"
     echo "========================================================================"
 fi
 
@@ -160,24 +176,32 @@ case $bin in
         ;;
 esac
 
-if [[ $SKIP ]]; then
-    read -N 6 bin < <($SKIP "$image")
+if [[ $SKIP ]] ; then
+    bin="$($SKIP "$image" | { read -N 6 bin && echo "$bin" ; })"
+else
+    read -N 6 bin < "$image"
 fi
-
 case $bin in
     $'\x1f\x8b'*)
-        CAT="zcat --";;
+        CAT="zcat --"
+        ;;
     BZh*)
-        CAT="bzcat --";;
+        CAT="bzcat --"
+        ;;
     $'\x71\xc7'*|070701)
         CAT="cat --"
         ;;
-    $'\x04\x22'*)
-        CAT="lz4 -d -c";;
+    $'\x02\x21'*)
+        CAT="lz4 -d -c"
+        ;;
+    $'\x89'LZO$'\0'*)
+        CAT="lzop -d -c"
+        ;;
     *)
-        CAT="xzcat --";
         if echo "test"|xz|xzcat --single-stream >/dev/null 2>&1; then
             CAT="xzcat --single-stream --"
+        else
+            CAT="xzcat --"
         fi
         ;;
 esac
@@ -197,17 +221,22 @@ ret=0
 if (( ${#filenames[@]} > 0 )); then
     extract_files
 else
-    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/dracut-*' 'usr/lib/dracut/dracut-*' 2>/dev/null)
+    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+        $(dracutlibdirs 'dracut-*') 2>/dev/null)
     ((ret+=$?))
     echo "Version: $version"
     echo
-    echo -n "Arguments: "
-    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/build-parameter.txt' 'usr/lib/dracut/build-parameter.txt' 2>/dev/null
-    echo
-    echo "dracut modules:"
-    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/modules.txt' 'usr/lib/dracut/modules.txt' 2>/dev/null
-    ((ret+=$?))
-    list_files
+    if [ "$modules" -eq 1 ]; then
+        list_modules
+        echo "========================================================================"
+    else
+        echo -n "Arguments: "
+        $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+            $(dracutlibdirs build-parameter.txt) 2>/dev/null
+        echo
+        list_modules
+        list_files
+    fi
 fi
 
 exit $ret

mkinitrd-suse.8.asc

@@ -76,7 +76,9 @@ OPTIONS
 
 **-A**::
     Create a so called "monster initrd" which includes all available
-    features and modules.
+    features and modules. This calls dracut with --no-hostonly and
+    --no-hostonly-cmdline parameters internally, instead of the default
+    --hostonly and --hostonly-cmdline.
 
 **-v, --verbose**::
     increase verbosity level
@@ -85,9 +87,6 @@ OPTIONS
     Disable logging to _/var/log/YaST2/mkinitrd.log_. This is useful for
     testing if you don’t want to clutter the system log.
 
-**--force**::
-    overwrite existing initramfs file.
-
 **--help**::
     print a help message and exit.
 

mkinitrd-suse.sh

@@ -1,6 +1,4 @@
 #!/bin/bash --norc
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # mkinitrd compability wrapper for SUSE.
 #
@@ -22,8 +20,6 @@
 
 boot_dir="/boot"
 quiet=0
-host_only=1
-force=0
 logfile=/var/log/YaST2/mkinitrd.log
 dracut_cmd=dracut
 
@@ -70,10 +66,7 @@ usage () {
     $cmd "	-j device		Journal device"
     $cmd "	-D interface		Run dhcp on the specified interface."
     $cmd "	-I interface		Configure the specified interface statically."
-    $cmd "	-a acpi_dsdt		Attach compiled ACPI DSDT (Differentiated"
-    $cmd "				System Description Table) to initrd. This"
-    $cmd "				replaces the DSDT of the BIOS. Defaults to"
-    $cmd "				the ACPI_DSDT variable in /etc/sysconfig/kernel."
+    $cmd "	-a acpi_dsdt		Obsolete, do not use."
     $cmd "	-s size			Add splash animation and bootscreen to initrd."
 
     [[ $1 = '-n' ]] && exit 0
@@ -152,6 +145,33 @@ is_xen_kernel() {
     return
 }
 
+# kernel_image_gz_from_image() and kernel_version_from_image() are helpers
+# for arm* kernels which produce zImage files which cannot be read from
+# get_kernel_version -> get rid of this workaround if possible
+kernel_image_gz_from_image() {
+    local arch=$(uname -i)
+    local r=${1}.gz
+
+    # uImage kernels can't be extracted directly. Use the vmlinux.gz instead
+    r=${r//uImage/vmlinux}
+
+    # on ARM a zImage can't be extracted directly. Other platforms define it
+    # as a gzipped vmlinux file, but not ARM. So only on ARM, use vmlinux.gz.
+    if [[ $arch =~ arm ]] || [[ $arch =~ aarch ]]; then
+        r=${r//zImage/vmlinux}
+    fi
+
+    echo $r
+}
+
+kernel_version_from_image() {
+    local kernel_image="$1" kernel_image_gz=$(kernel_image_gz_from_image "$1")
+
+    if get_kernel_version "$kernel_image" 2>/dev/null; then
+        return
+    fi
+    get_kernel_version "$kernel_image_gz" 2>/dev/null
+}
 
 # Taken over from SUSE mkinitrd
 default_kernel_images() {
@@ -190,7 +210,8 @@ default_kernel_images() {
 
         [ -L "$boot_dir/$kernel_image" ] && continue
         [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
-        kernel_version=$(/usr/bin/get_kernel_version \
+
+        kernel_version=$(kernel_version_from_image \
                          $boot_dir/$kernel_image 2> /dev/null)
         initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
         if [ "$kernel_image" != "$initrd_image" -a \
@@ -206,8 +227,6 @@ default_kernel_images() {
     for initrd_image in $initrd_images;do
 	targets="$targets $initrd_image"
     done
-    host_only=1
-    force=1
 }
 
 while (($# > 0)); do
@@ -220,8 +239,6 @@ while (($# > 0)); do
 	    for kernel_image in $kernel_images;do
 		kernels="$kernels ${kernel_image#*-}"
 	    done
-	    host_only=1
-	    force=1
 	    ;;
 	-i) read_arg initrd_images "$@" || shift $?
 	    for initrd_image in $initrd_images;do
@@ -263,7 +280,7 @@ while (($# > 0)); do
 	    dracut_cmdline="${dracut_cmdline} ip=$(ipconfig $static_if)":
 	    ;;
 	-a) read_arg acpi_dsdt "$@" || shift $?
-	    echo "mkinitrd: custom DSDT not yet supported"
+	    echo "Obsolete -a param, use acpi_table_dir= and acpi_override= variables in /etc/dracut.conf.d/"
 	    exit 1
 	    ;;
 	-s) read_arg boot_splash "$@" || shift $?
@@ -277,7 +294,6 @@ while (($# > 0)); do
         --version|-R)
             echo "mkinitrd: dracut compatibility wrapper"
             exit 0;;
-        --force) force=1;;
 	--quiet|-q) quiet=1;;
         *)  if [[ ! $targets ]]; then
             targets=$1
@@ -291,15 +307,18 @@ while (($# > 0)); do
 done
 
 [[ $targets && $kernels ]] || default_kernel_images
-[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage)
+if [[ ! $targets || ! $kernels ]];then
+    error "No kernel found in $boot_dir or bad modules dir in /lib/modules"
+    exit 1
+fi
 
 # We can have several targets/kernels, transform the list to an array
 targets=( $targets )
 [[ $kernels ]] && kernels=( $kernels )
 
 [[ $logfile ]]        && dracut_args="${dracut_args} --logfile $logfile"
-[[ $host_only == 1 ]] && dracut_args="${dracut_args} --hostonly"
-[[ $force == 1 ]]     && dracut_args="${dracut_args} --force"
+dracut_args="${dracut_args} --force"
+
 [[ $dracut_cmdline ]] && dracut_args="${dracut_args} --kernel-cmdline ${dracut_cmdline}"
 [ -z "$(type -p update-bootloader)" ] && skip_update_bootloader=1
 
@@ -308,11 +327,11 @@ if [ -f /etc/sysconfig/kernel ] ; then
     . /etc/sysconfig/kernel
 fi
 [[ $module_list ]] || module_list="${INITRD_MODULES}"
-basicmodules="$basicmodules ${module_list}"
 [[ $domu_module_list ]] || domu_module_list="${DOMU_INITRD_MODULES}"
-[[ $acpi_dsdt ]] || acpi_dsdt="${ACPI_DSDT}"
+shopt -s extglob
+
+failed=""
 
-echo "Creating: target|kernel|dracut args|basicmodules "
 for ((i=0 ; $i<${#targets[@]} ; i++)); do
 
     if [[ $img_vers ]];then
@@ -322,28 +341,38 @@ for ((i=0 ; $i<${#targets[@]} ; i++)); do
     fi
     kernel="${kernels[$i]}"
 
+    if is_xen_kernel $kernel $rootfs ; then
+	modules_all="${module_list} ${domu_module_list}"
+    else
+        modules_all="${module_list}"
+    fi
+
+    # Remove leading and trailing spaces needs (set above): shopt -s extglob
+    modules_all=${modules_all%%+([[:space:]])}
+    modules_all=${modules_all##+([[:space:]])}
+
+    echo "Creating initrd: $target"
+
     # Duplicate code: No way found how to redirect output based on $quiet
     if [[ $quiet == 1 ]];then
-	echo "$target|$kernel|$dracut_args|$basicmodules"
-	if is_xen_kernel $kernel $rootfs ; then
-	    basicmodules="$basicmodules ${domu_module_list}"
-	fi
-	if [[ $basicmodules ]]; then
-            $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \
-		"$kernel" &>/dev/null
-	else
+        # Duplicate code: --force-drivers must not be called with empty string
+        # -> dracut bug workarounded ugly, because of complex whitespace
+        # expansion magics
+        if [ -n "${modules_all}" ];then
+            $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel" &>/dev/null
+            [ $? -ne 0 ] && failed="$failed $target"
+        else
             $dracut_cmd $dracut_args "$target" "$kernel" &>/dev/null
-	fi
+            [ $? -ne 0 ] && failed="$failed $target"
+        fi
     else
-	if is_xen_kernel $kernel $rootfs ; then
-	    basicmodules="$basicmodules ${domu_module_list}"
-	fi
-	if [[ $basicmodules ]]; then
-            $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \
-		"$kernel"
-	else
+        if [ -n "${modules_all}" ];then
+            $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel"
+            [ $? -ne 0 ] && failed="$failed $target"
+        else
             $dracut_cmd $dracut_args "$target" "$kernel"
-	fi
+            [ $? -ne 0 ] && failed="$failed $target"
+        fi
     fi
 done
 
@@ -351,4 +380,12 @@ if [ "$skip_update_bootloader" ] ; then
     echo 2>&1 "Did not refresh the bootloader. You might need to refresh it manually."
 else
     update-bootloader --refresh
+    [ $? -ne 0 ] && echo "Updating bootloader failed" && exit 1
 fi
+
+if [ "$failed" != "" ]; then
+    echo "Generating $failed targets failed"
+    exit 1
+fi
+
+exit 0

modules.d/00bash/module-setup.sh

@@ -1,10 +1,8 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
-    [ -x /bin/bash ]
+    require_binaries /bin/bash
 }
 
 # called by dracut

modules.d/00bootchart/module-setup.sh

@@ -1,11 +1,9 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
-    [ -x /sbin/bootchartd ] || return 1
+    require_binaries /sbin/bootchartd || return 1
     return 255
 }
 

modules.d/00dash/module-setup.sh

@@ -1,10 +1,8 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
-    [ -x /bin/dash ]
+    require_binaries /bin/dash
 }
 
 # called by dracut

modules.d/00systemd-bootchart/module-setup.sh

@@ -1,11 +1,9 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
-    [ -x $systemdutildir/systemd-bootchart ] || return 1
+    require_binaries $systemdutildir/systemd-bootchart || return 1
     return 255
 }
 

modules.d/00systemd/module-setup.sh

@@ -1,11 +1,9 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
     [[ $mount_needs ]] && return 1
-    if [[ -x $systemdutildir/systemd ]]; then
+    if require_binaries $systemdutildir/systemd; then
         SYSTEMD_VERSION=$($systemdutildir/systemd --version | { read a b a; echo $b; })
         (( $SYSTEMD_VERSION >= 198 )) && return 0
        return 255
@@ -20,7 +18,8 @@ depends() {
 }
 
 installkernel() {
-    instmods autofs4 ipv6
+    hostonly='' instmods autofs4 ipv6
+    instmods -s efivarfs
 }
 
 # called by dracut
@@ -44,20 +43,22 @@ install() {
         $systemdutildir/systemd-modules-load \
         $systemdutildir/systemd-vconsole-setup \
         $systemdutildir/system-generators/systemd-fstab-generator \
+        $systemdutildir/system-generators/systemd-gpt-auto-generator \
+        \
         $systemdsystemunitdir/cryptsetup.target \
         $systemdsystemunitdir/emergency.target \
         $systemdsystemunitdir/sysinit.target \
         $systemdsystemunitdir/basic.target \
         $systemdsystemunitdir/halt.target \
         $systemdsystemunitdir/kexec.target \
-        $systemdsystemunitdir/initrd.target \
-        $systemdsystemunitdir/initrd-fs.target \
-        $systemdsystemunitdir/initrd-root-fs.target \
         $systemdsystemunitdir/local-fs.target \
         $systemdsystemunitdir/local-fs-pre.target \
         $systemdsystemunitdir/remote-fs.target \
         $systemdsystemunitdir/remote-fs-pre.target \
+        $systemdsystemunitdir/multi-user.target \
         $systemdsystemunitdir/network.target \
+        $systemdsystemunitdir/network-pre.target \
+        $systemdsystemunitdir/network-online.target \
         $systemdsystemunitdir/nss-lookup.target \
         $systemdsystemunitdir/nss-user-lookup.target \
         $systemdsystemunitdir/poweroff.target \
@@ -72,6 +73,9 @@ install() {
         $systemdsystemunitdir/timers.target \
         $systemdsystemunitdir/paths.target \
         $systemdsystemunitdir/umount.target \
+        \
+        $systemdsystemunitdir/sys-kernel-config.mount \
+        \
         $systemdsystemunitdir/kmod-static-nodes.service \
         $systemdsystemunitdir/systemd-tmpfiles-setup-dev.service \
         $systemdsystemunitdir/systemd-ask-password-console.path \
@@ -79,6 +83,7 @@ install() {
         $systemdsystemunitdir/systemd-udevd-kernel.socket \
         $systemdsystemunitdir/systemd-ask-password-plymouth.path \
         $systemdsystemunitdir/systemd-journald.socket \
+        $systemdsystemunitdir/systemd-journald-audit.socket \
         $systemdsystemunitdir/systemd-ask-password-console.service \
         $systemdsystemunitdir/systemd-modules-load.service \
         $systemdsystemunitdir/systemd-halt.service \
@@ -93,6 +98,8 @@ install() {
         $systemdsystemunitdir/systemd-journald.service \
         $systemdsystemunitdir/systemd-vconsole-setup.service \
         $systemdsystemunitdir/systemd-random-seed-load.service \
+        $systemdsystemunitdir/systemd-random-seed.service \
+        $systemdsystemunitdir/systemd-sysctl.service \
         \
         $systemdsystemunitdir/sysinit.target.wants/systemd-modules-load.service \
         $systemdsystemunitdir/sysinit.target.wants/systemd-ask-password-console.path \
@@ -100,23 +107,30 @@ install() {
         $systemdsystemunitdir/sockets.target.wants/systemd-udevd-control.socket \
         $systemdsystemunitdir/sockets.target.wants/systemd-udevd-kernel.socket \
         $systemdsystemunitdir/sockets.target.wants/systemd-journald.socket \
+        $systemdsystemunitdir/sockets.target.wants/systemd-journald-audit.socket \
+        $systemdsystemunitdir/sockets.target.wants/systemd-journald-dev-log.socket \
         $systemdsystemunitdir/sysinit.target.wants/systemd-udevd.service \
         $systemdsystemunitdir/sysinit.target.wants/systemd-udev-trigger.service \
         $systemdsystemunitdir/sysinit.target.wants/kmod-static-nodes.service \
         $systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup-dev.service \
+        $systemdsystemunitdir/sysinit.target.wants/systemd-sysctl.service \
         \
         $systemdsystemunitdir/ctrl-alt-del.target \
+        $systemdsystemunitdir/reboot.target \
+        $systemdsystemunitdir/systemd-reboot.service \
         $systemdsystemunitdir/syslog.socket \
-        $systemdsystemunitdir/initrd-switch-root.target \
-        $systemdsystemunitdir/initrd-switch-root.service \
-        $systemdsystemunitdir/initrd-cleanup.service \
-        $systemdsystemunitdir/initrd-udevadm-cleanup-db.service \
-        $systemdsystemunitdir/initrd-parse-etc.service \
         \
         $systemdsystemunitdir/slices.target \
         $systemdsystemunitdir/system.slice \
         \
-        journalctl systemctl echo swapoff systemd-cgls systemd-tmpfiles
+        $tmpfilesdir/systemd.conf \
+        \
+        journalctl systemctl \
+        echo swapoff \
+        kmod insmod rmmod modprobe modinfo depmod lsmod \
+        mount umount reboot poweroff \
+        systemd-run systemd-escape \
+        systemd-cgls systemd-tmpfiles
 
     inst_multiple -o \
         /usr/lib/modules-load.d/*.conf \
@@ -126,7 +140,7 @@ install() {
         local _line i
         for i in "$1"/*.conf; do
             [[ -f $i ]] || continue
-            while read _line; do
+            while read _line || [ -n "$_line" ]; do
                 case $_line in
                     \#*)
                         ;;
@@ -143,7 +157,7 @@ install() {
     [[ $_mods ]] && instmods $_mods
 
     if [[ $hostonly ]]; then
-        inst_multiple -o \
+        inst_multiple -H -o \
             /etc/systemd/journald.conf \
             /etc/systemd/system.conf \
             /etc/hostname \
@@ -164,38 +178,28 @@ install() {
 
     # install adm user/group for journald
     inst_multiple nologin
-    egrep '^systemd-journal:' "$initdir/etc/passwd" 2>/dev/null >> "$initdir/etc/passwd"
+    egrep '^systemd-journal:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    egrep '^adm:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
     egrep '^systemd-journal:' /etc/group >> "$initdir/etc/group"
+    egrep '^wheel:' /etc/group >> "$initdir/etc/group"
+    egrep '^adm:' /etc/group >> "$initdir/etc/group"
 
     ln_r $systemdutildir/systemd "/init"
     ln_r $systemdutildir/systemd "/sbin/init"
 
-    inst_script "$moddir/dracut-emergency.sh" /bin/dracut-emergency
-    inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/emergency.service
-    inst_simple "$moddir/dracut-emergency.service" ${systemdsystemunitdir}/dracut-emergency.service
-    inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/rescue.service
-
-    ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target"
-
-    inst_script "$moddir/dracut-cmdline.sh" /bin/dracut-cmdline
-    inst_script "$moddir/dracut-pre-udev.sh" /bin/dracut-pre-udev
-    inst_script "$moddir/dracut-pre-trigger.sh" /bin/dracut-pre-trigger
-    inst_script "$moddir/dracut-initqueue.sh" /bin/dracut-initqueue
-    inst_script "$moddir/dracut-pre-mount.sh" /bin/dracut-pre-mount
-    inst_script "$moddir/dracut-mount.sh" /bin/dracut-mount
-    inst_script "$moddir/dracut-pre-pivot.sh" /bin/dracut-pre-pivot
-
-    inst_script "$moddir/rootfs-generator.sh" /lib/systemd/system-generators/dracut-rootfs-generator
-
     inst_binary true
     ln_r $(type -P true) "/usr/bin/loginctl"
     ln_r $(type -P true) "/bin/loginctl"
-    inst_rules 71-seat.rules 73-seat-late.rules 99-systemd.rules
+    inst_rules \
+        70-uaccess.rules \
+        71-seat.rules \
+        73-seat-late.rules \
+        90-vconsole.rules \
+        99-systemd.rules
 
     for i in \
         emergency.target \
-        dracut-emergency.service \
-        rescue.service \
+        rescue.target \
         systemd-ask-password-console.service \
         systemd-ask-password-plymouth.service \
         ; do
@@ -204,20 +208,6 @@ install() {
             "${systemdsystemunitdir}/${i}.wants/systemd-vconsole-setup.service"
     done
 
-    mkdir -p "${initdir}/$systemdsystemunitdir/initrd.target.wants"
-    for i in \
-        dracut-cmdline.service \
-        dracut-initqueue.service \
-        dracut-mount.service \
-        dracut-pre-mount.service \
-        dracut-pre-pivot.service \
-        dracut-pre-trigger.service \
-        dracut-pre-udev.service \
-        ; do
-        inst_simple "$moddir/${i}" "$systemdsystemunitdir/${i}"
-        ln_r "$systemdsystemunitdir/${i}" "$systemdsystemunitdir/initrd.target.wants/${i}"
-    done
-
     mkdir -p "$initdir/etc/systemd"
     # turn off RateLimit for journal
     {
@@ -226,5 +216,6 @@ install() {
         echo "RateLimitBurst=0"
     } >> "$initdir/etc/systemd/journald.conf"
 
+    ln_r "${systemdsystemunitdir}/multi-user.target" "${systemdsystemunitdir}/default.target"
 }
 

modules.d/01fips/fips-boot.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
     rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1

modules.d/01fips/fips-noboot.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
     rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1

modules.d/01fips/fips.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 mount_boot()
 {
@@ -61,8 +59,8 @@ do_rhevh_check()
     kpath=${1}
 
     # If we're on RHEV-H, the kernel is in /run/initramfs/live/vmlinuz0
-    HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b; do printf "%s\n" $a; done)
-    HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b; do printf "%s\n" $a; done || return 1)
+    HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done)
+    HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done || return 1)
     if [ -z "$HMAC_SUM_ORIG" ] || [ -z "$HMAC_SUM_CALC" ] || [ "${HMAC_SUM_ORIG}" != "${HMAC_SUM_CALC}" ]; then
         warn "HMAC sum mismatch"
         return 1
@@ -94,7 +92,7 @@ do_fips()
             if ! modprobe "${_module}"; then
                 # check if kernel provides generic algo
                 _found=0
-                while read _k _s _v; do
+                while read _k _s _v || [ -n "$_k" ]; do
                     [ "$_k" != "name" -a "$_k" != "driver" ] && continue
                     [ "$_v" != "$_module" ] && continue
                     _found=1

modules.d/01fips/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
@@ -15,11 +13,12 @@ depends() {
 # called by dracut
 installkernel() {
     local _fipsmodules _mod
-    _fipsmodules="aead aes_generic aes-x86_64 ansi_cprng arc4 blowfish camellia cast6 cbc ccm "
-    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod "
+    _fipsmodules="aead aes_generic aes-x86_64 ansi_cprng arc4 authenc authencesn blowfish camellia cast6 cbc ccm "
+    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod drbg "
     _fipsmodules+="ecb eseqiv fcrypt gcm ghash_generic hmac khazad lzo md4 md5 michael_mic rmd128 "
     _fipsmodules+="rmd160 rmd256 rmd320 rot13 salsa20 seed seqiv serpent sha1 sha224 sha256 sha256_generic "
     _fipsmodules+="sha384 sha512 sha512_generic tcrypt tea tnepres twofish wp256 wp384 wp512 xeta xtea xts zlib"
+    _fipsmodules+="aes_s390 des_s390 prng sha256_s390 sha_common des_check_key ghash_s390 sha1_s390 sha512_s390"
 
     mkdir -m 0755 -p "${initdir}/etc/modprobe.d"
 
@@ -42,7 +41,8 @@ install() {
 
     inst_libdir_file libsoftokn3.so libsoftokn3.so \
         libsoftokn3.chk libfreebl3.so libfreebl3.chk \
-        libssl.so 'hmaccalc/sha512hmac.hmac' libssl.so.10
+        libssl.so 'hmaccalc/sha512hmac.hmac' libssl.so.10 \
+        libfreeblpriv3.so libfreeblpriv3.chk
 
     inst_multiple -o prelink
     inst_simple /etc/system-fips

modules.d/01systemd-initrd/module-setup.sh

@@ -0,0 +1,68 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    [[ $mount_needs ]] && return 1
+
+    if ! dracut_module_included "systemd"; then
+        derror "systemd-initrd needs systemd in the initramfs"
+        return 1
+    fi
+
+    return 0
+}
+
+# called by dracut
+depends() {
+    echo "systemd"
+}
+
+installkernel() {
+    return 0
+}
+
+# called by dracut
+install() {
+    local _mods
+
+    inst_multiple -o \
+        $systemdsystemunitdir/initrd.target \
+        $systemdsystemunitdir/initrd-fs.target \
+        $systemdsystemunitdir/initrd-root-fs.target \
+        $systemdsystemunitdir/initrd-switch-root.target \
+        $systemdsystemunitdir/initrd-switch-root.service \
+        $systemdsystemunitdir/initrd-cleanup.service \
+        $systemdsystemunitdir/initrd-udevadm-cleanup-db.service \
+        $systemdsystemunitdir/initrd-parse-etc.service
+
+    ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target"
+
+    if [ -e /etc/os-release ]; then
+        . /etc/os-release
+        VERSION+=" "
+        PRETTY_NAME+=" "
+    else
+        VERSION=""
+        PRETTY_NAME=""
+    fi
+    NAME=dracut
+    ID=dracut
+    VERSION+="dracut-$DRACUT_VERSION"
+    PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)"
+    VERSION_ID=$DRACUT_VERSION
+    ANSI_COLOR="0;34"
+
+    {
+        echo NAME=\"$NAME\"
+        echo VERSION=\"$VERSION\"
+        echo ID=$ID
+        echo VERSION_ID=$VERSION_ID
+        echo PRETTY_NAME=\"$PRETTY_NAME\"
+        echo ANSI_COLOR=\"$ANSI_COLOR\"
+    } > $initdir/usr/lib/initrd-release
+    echo dracut-$DRACUT_VERSION > $initdir/lib/dracut/dracut-$DRACUT_VERSION
+    ln -sf ../usr/lib/initrd-release $initdir/etc/initrd-release
+    ln -sf initrd-release $initdir/usr/lib/os-release
+    ln -sf initrd-release $initdir/etc/os-release
+}
+

modules.d/02caps/caps.sh

@@ -1,12 +1,10 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 capsmode=$(getarg rd.caps)
 
 if [ "$capsmode" = "1" ]; then
     CAPS_INIT_DROP=$(getarg rd.caps.initdrop=)
-    CAPS_USERMODEHELPER_BSET=$(capsh --drop="$CAPS_INIT_DROP" -- -c 'while read a b ; do [ "$a" = "CapBnd:" ] && echo $((0x${b:$((${#b}-8)):8})) $((0x${b:$((${#b}-16)):8})) && break; done < /proc/self/status')
+    CAPS_USERMODEHELPER_BSET=$(capsh --drop="$CAPS_INIT_DROP" -- -c 'while read a b  || [ -n "$a" ]; do [ "$a" = "CapBnd:" ] && echo $((0x${b:$((${#b}-8)):8})) $((0x${b:$((${#b}-16)):8})) && break; done < /proc/self/status')
     CAPS_MODULES_DISABLED=$(getarg rd.caps.disablemodules=)
     CAPS_KEXEC_DISABLED=$(getarg rd.caps.disablekexec=)
 

modules.d/02caps/module-setup.sh

@@ -1,10 +1,8 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
-    type -P capsh >/dev/null 2>&1
+    require_binaries capsh
 }
 
 # called by dracut
@@ -14,9 +12,13 @@ depends() {
 
 # called by dracut
 install() {
-    inst_hook pre-pivot 00 "$moddir/caps.sh"
-    inst $(type -P capsh 2>/dev/null) /usr/sbin/capsh
-    # capsh wants bash and we need bash also
-    inst /bin/bash
+    if ! dracut_module_included "systemd"; then
+        inst_hook pre-pivot 00 "$moddir/caps.sh"
+        inst $(type -P capsh 2>/dev/null) /usr/sbin/capsh
+        # capsh wants bash and we need bash also
+        inst /bin/bash
+    else
+        dwarning "caps: does not work with systemd in the initramfs"
+    fi
 }
 

modules.d/02fips-aesni/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/02systemd-networkd/module-setup.sh

@@ -0,0 +1,71 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    [[ $mount_needs ]] && return 1
+
+    if ! dracut_module_included "systemd"; then
+        derror "systemd-networkd needs systemd in the initramfs"
+        return 1
+    fi
+
+    return 255
+}
+
+# called by dracut
+depends() {
+    echo "systemd kernel-network-modules"
+}
+
+installkernel() {
+    return 0
+}
+
+# called by dracut
+install() {
+    inst_multiple -o \
+        $systemdutildir/systemd-networkd \
+        $systemdutildir/systemd-networkd-wait-online \
+        $systemdsystemunitdir/systemd-networkd-wait-online.service \
+        $systemdsystemunitdir/systemd-networkd.service \
+        $systemdsystemunitdir/systemd-networkd.socket \
+        $systemdutildir/network/99-default.link \
+        networkctl ip
+
+        #hostnamectl timedatectl
+        # $systemdutildir/systemd-timesyncd \
+        # $systemdutildir/systemd-timedated \
+        # $systemdutildir/systemd-hostnamed \
+        # $systemdutildir/systemd-resolvd \
+        # $systemdutildir/systemd-resolve-host \
+        # $systemdsystemunitdir/systemd-resolved.service \
+        # $systemdsystemunitdir/systemd-hostnamed.service \
+        # $systemdsystemunitdir/systemd-timesyncd.service \
+        # $systemdsystemunitdir/systemd-timedated.service \
+        # $systemdsystemunitdir/time-sync.target \
+        # /etc/systemd/resolved.conf \
+
+
+    # inst_dir /var/lib/systemd/clock
+
+    egrep '^systemd-network:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    egrep '^systemd-network:' /etc/group >> "$initdir/etc/group"
+    # egrep '^systemd-timesync:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    # egrep '^systemd-timesync:' /etc/group >> "$initdir/etc/group"
+
+    _arch=$(uname -m)
+    inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_myhostname.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_resolve.so.*"
+
+    for i in \
+        systemd-networkd-wait-online.service \
+            systemd-networkd.service \
+            systemd-networkd.socket
+#            systemd-timesyncd.service
+    do
+        systemctl --root "$initdir" enable "$i"
+    done
+}
+

modules.d/03modsign/load-modsign-keys.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Licensed under the GPLv2
 #

modules.d/03modsign/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Licensed under the GPLv2
 #
@@ -9,7 +7,7 @@
 
 # called by dracut
 check() {
-    [[ -x /usr/bin/keyctl ]] || return 1
+    require_binaries keyctl || return 1
 
     # do not include module in hostonly mode,
     # if no keys are present
@@ -29,7 +27,7 @@ depends() {
 # called by dracut
 install() {
     inst_dir /lib/modules/keys
-    inst_binary /usr/bin/keyctl
+    inst_binary keyctl
 
     inst_hook pre-trigger 01 "$moddir/load-modsign-keys.sh"
 

modules.d/03rescue/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/04watchdog/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/04watchdog/watchdog-stop.sh

@@ -1,2 +1,2 @@
 #!/bin/sh
-[ -c /dev/watchdog ] && echo -n 'V' > /dev/watchdog
+[ -c /dev/watchdog ] && printf 'V' > /dev/watchdog

modules.d/05busybox/module-setup.sh

@@ -1,10 +1,8 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
-    type -P busybox >/dev/null || return 1
+    require_binaries busybox || return 1
 
     return 255
 }

modules.d/10i18n/console_init.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 [ -n "$DRACUT_SYSTEMD" ] && exit 0
 

modules.d/10i18n/module-setup.sh

@@ -1,14 +1,10 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
 
-    for i in setfont loadkeys kbd_mode; do
-        type -P "$i" >/dev/null || return 1
-    done
+    require_binaries setfont loadkeys kbd_mode || return 1
 
     return 0
 }
@@ -44,7 +40,7 @@ install() {
             *) cmd=grep ;;
         esac
 
-        for INCL in $($cmd "^include " $MAP | while read a a b; do echo ${a//\"/}; done); do
+        for INCL in $($cmd "^include " $MAP | while read a a b || [ -n "$a" ]; do echo ${a//\"/}; done); do
             for FN in $(find ${kbddir}/keymaps -type f -name $INCL\*); do
                 findkeymap $FN
             done
@@ -118,12 +114,12 @@ install() {
         rm -f -- "${initdir}${kbddir}/consoletrans/utflist"
         find "${initdir}${kbddir}/" -name README\* -delete
         find "${initdir}${kbddir}/" -name '*.gz' -print -quit \
-            | while read line; do
+            | while read line || [ -n "$line" ]; do
             inst_multiple gzip
             done
 
         find "${initdir}${kbddir}/" -name '*.bz2' -print -quit \
-            | while read line; do
+            | while read line || [ -n "$line" ]; do
             inst_multiple bzip2
             done
     }
@@ -249,7 +245,7 @@ install() {
     if checks; then
         install_base
 
-        if [[ ${hostonly} ]] && ! [[ ${i18n_install_all} ]]; then
+        if [[ ${hostonly} ]] && ! [[ ${i18n_install_all} == "yes" ]]; then
             install_local_i18n || install_all_kbd
         else
             install_all_kbd

modules.d/10i18n/parse-i18n.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 inst_key_val() {
     local _value
@@ -12,7 +10,7 @@ inst_key_val() {
     _value="$(getarg $@)"
     [ -z "${_value}" ] && _value=$_default
     if [ -n "${_value}" ]; then
-        printf '%s="%s"\n' $key ${_value} >> $_file
+        printf '%s="%s"\n' ${_key} ${_value} >> $_file
     fi
     unset _file
     unset _value

modules.d/30convertfs/convertfs.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 ROOT="$1"
 
@@ -76,7 +74,7 @@ rm -f -- "$testfile"
 find_mount() {
     local dev mnt etc wanted_dev
     wanted_dev="$(readlink -e -q $1)"
-    while read dev mnt etc; do
+    while read dev mnt etc || [ -n "$dev" ]; do
         [ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
     done < /proc/mounts
     return 1
@@ -95,7 +93,7 @@ else
             return 1
         fi
 
-        while read a m a; do
+        while read a m a || [ -n "$m" ]; do
             [ "$m" = "$1" ] && return 0
         done < /proc/mounts
         return 1

modules.d/30convertfs/do-convertfs.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if getargbool 0 rd.convertfs; then
     if getargbool 0 rd.debug; then

modules.d/30convertfs/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/40network/dhclient-script.sh

@@ -1,6 +1,12 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+PATH=/usr/sbin:/usr/bin:/sbin:/bin
+
+type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
+
+# We already need a set netif here
+netif=$interface
 
 setup_interface() {
     ip=$new_ip_address
@@ -12,7 +18,10 @@ setup_interface() {
     search=$(printf -- "$new_domain_search")
     namesrv=$new_domain_name_servers
     hostname=$new_host_name
-    lease_time=$new_dhcp_lease_time
+    [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
+    [ -n "$new_max_life" ] && lease_time=$new_max_life
+    preferred_lft=$lease_time
+    [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
 
     [ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override
 
@@ -30,42 +39,74 @@ setup_interface() {
         fi
     fi
 
-    ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} \
-        valid_lft ${lease_time} preferred_lft ${lease_time} \
-        dev $netif
+    ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} dev $netif \
+        ${lease_time:+valid_lft $lease_time} \
+        ${preferred_lft:+preferred_lft ${preferred_lft}}
 
-    [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
+    if [ -n "$gw" ] ; then
+        if [ "$mask" = "255.255.255.255" ] ; then
+            # point-to-point connection => set explicit route to gateway
+            echo ip route add $gw dev $netif > /tmp/net.$netif.gw
+        fi
+        echo ip route replace default via $gw dev $netif >> /tmp/net.$netif.gw
+    fi
 
-    [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
-    if  [ -n "$namesrv" ] ; then
-        for s in $namesrv; do
-            echo nameserver $s
-        done
-    fi >> /tmp/net.$netif.resolv.conf
+    if getargbool 1 rd.peerdns; then
+        [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
+        if  [ -n "$namesrv" ] ; then
+            for s in $namesrv; do
+                echo nameserver $s
+            done
+        fi >> /tmp/net.$netif.resolv.conf
+    fi
+    # Note: hostname can be fqdn OR short hostname, so chop off any
+    # trailing domain name and explicity add any domain if set.
+    [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
+}
+
+setup_interface6() {
+    domain=$new_domain_name
+    search=$(printf -- "$new_domain_search")
+    namesrv=$new_domain_name_servers
+    hostname=$new_host_name
+    [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
+    [ -n "$new_max_life" ] && lease_time=$new_max_life
+    preferred_lft=$lease_time
+    [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
+
+    [ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override
+
+    ip -6 addr add ${new_ip6_address}/${new_ip6_prefixlen} \
+        dev ${netif} scope global \
+        ${lease_time:+valid_lft $lease_time} \
+        ${preferred_lft:+preferred_lft ${preferred_lft}}
+
+    if getargbool 1 rd.peerdns; then
+        [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
+        if  [ -n "$namesrv" ] ; then
+            for s in $namesrv; do
+                echo nameserver $s
+            done
+        fi >> /tmp/net.$netif.resolv.conf
+    fi
 
     # Note: hostname can be fqdn OR short hostname, so chop off any
     # trailing domain name and explicity add any domain if set.
     [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 }
 
-PATH=/usr/sbin:/usr/bin:/sbin:/bin
-
-export PS4="dhclient.$interface.$$ + "
-[ -e /run/initramfs/loginit.pipe ] && exec >>/run/initramfs/loginit.pipe 2>>/run/initramfs/loginit.pipe
-type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
-type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
-
-# We already need a set netif here
-netif=$interface
-
-# Huh? Interface configured?
-[ -f "/tmp/net.$netif.up" ] && exit 0
-
 case $reason in
     PREINIT)
         echo "dhcp: PREINIT $netif up"
         linkup $netif
         ;;
+
+    PREINIT6)
+        echo "dhcp: PREINIT6 $netif up"
+        linkup $netif
+        wait_for_ipv6_dad $netif
+        ;;
+
     BOUND)
         echo "dhcp: BOND setting $netif"
         unset layer2
@@ -73,14 +114,14 @@ case $reason in
             read layer2 < /sys/class/net/$netif/device/layer2
         fi
         if [ "$layer2" != "0" ]; then
-            if ! arping -q -D -c 2 -I $netif $new_ip_address ; then
+            if ! arping -f -q -D -c 2 -I $netif $new_ip_address ; then
                 warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
                 exit 1
             fi
         fi
         unset layer2
         setup_interface
-        set | while read line; do
+        set | while read line || [ -n "$line" ]; do
             [ "${line#new_}" = "$line" ] && continue
             echo "$line"
         done >/tmp/dhclient.$netif.dhcpopts
@@ -90,14 +131,63 @@ case $reason in
             echo "setup_net $netif"
             echo "source_hook initqueue/online $netif"
             [ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
-            echo "> /tmp/setup_net_$netif.ok"
-            echo "> /tmp/setup_net_\$(cat /sys/class/net/$netif/address).ok"
             echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
         } > $hookdir/initqueue/setup_net_$netif.sh
 
-        echo "[ -f /tmp/setup_net_$netif.ok ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
+        echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
         >/tmp/net.$netif.up
+        if [ -e /sys/class/net/${netif}/address ]; then
+            > /tmp/net.$(cat /sys/class/net/${netif}/address).up
+        fi
+
         ;;
+
+    RENEW|REBIND)
+        unset lease_time
+        [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
+        [ -n "$new_max_life" ] && lease_time=$new_max_life
+        preferred_lft=$lease_time
+        [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
+        ip -4 addr change ${new_ip_address}/${new_subnet_mask} broadcast ${new_broadcast_address} dev ${interface} \
+           ${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \
+           >/dev/null 2>&1
+        ;;
+
+    BOUND6)
+        echo "dhcp: BOND6 setting $netif"
+        setup_interface6
+
+        set | while read line || [ -n "$line" ]; do
+            [ "${line#new_}" = "$line" ] && continue
+            echo "$line"
+        done >/tmp/dhclient.$netif.dhcpopts
+
+        {
+            echo '. /lib/net-lib.sh'
+            echo "setup_net $netif"
+            echo "source_hook initqueue/online $netif"
+            [ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
+            echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
+        } > $hookdir/initqueue/setup_net_$netif.sh
+
+        echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
+        >/tmp/net.$netif.up
+        if [ -e /sys/class/net/${netif}/address ]; then
+            > /tmp/net.$(cat /sys/class/net/${netif}/address).up
+        fi
+        ;;
+
+    RENEW6|REBIND6)
+        unset lease_time
+        [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
+        [ -n "$new_max_life" ] && lease_time=$new_max_life
+        preferred_lft=$lease_time
+        [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
+        ip -6 addr change ${new_ip6_address}/${new_ip6_prefixlen} dev ${interface} scope global \
+           ${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \
+           >/dev/null 2>&1
+        ;;
+
     *) echo "dhcp: $reason";;
 esac
 

modules.d/40network/dhcp-root.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # This script is sourced, so root should be set. But let's be paranoid
 [ -z "$root" ] && root=$(getarg root=)

modules.d/40network/ifname-genrules.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # if there are no ifname parameters, just use NAME=KERNEL
 if ! getarg ifname= >/dev/null ; then

modules.d/40network/ifup.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # We don't need to check for ip= errors here, that is handled by the
 # cmdline parser script
@@ -60,7 +58,7 @@ fi
 # bridge this interface?
 if [ -e /tmp/bridge.info ]; then
     . /tmp/bridge.info
-    for ethname in $ethnames ; do
+    for ethname in $bridgeslaves ; do
         if [ "$netif" = "$ethname" ]; then
             if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then
                 : # We need to really setup bond (recursive call)
@@ -79,24 +77,53 @@ fi
 # disable manual ifup while netroot is set for simplifying our logic
 # in netroot case we prefer netroot to bringup $netif automaticlly
 [ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2"
-[ -z "$netroot" ] && [ -z "$manualup" ] && exit 0
-[ -n "$manualup" ] && >/tmp/net.$netif.manualup
+
+if [ -n "$manualup" ]; then
+    >/tmp/net.$netif.manualup
+    rm -f /tmp/net.${netif}.did-setup
+else
+    [ -e /tmp/net.${netif}.did-setup ] && exit 0
+    [ -e /sys/class/net/$netif/address ] && \
+        [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && exit 0
+fi
 
 # Run dhclient
 do_dhcp() {
     # dhclient-script will mark the netif up and generate the online
     # event for nfsroot
     # XXX add -V vendor class and option parsing per kernel
+
+    local _COUNT=0
+    local _timeout=$(getargs rd.net.timeout.dhcp=)
+    local _DHCPRETRY=$(getargs rd.net.dhcp.retry=)
+    _DHCPRETRY=${_DHCPRETRY:-1}
+
+    [ -e /tmp/dhclient.$netif.pid ] && return 0
+
     if ! iface_has_link $netif; then
-        echo "No carrier detected"
+        warn "No carrier detected on interface $netif"
         return 1
     fi
-    echo "Starting dhcp for interface $netif"
-    dhclient "$@" -1 -q -cf /etc/dhclient.conf -pf /tmp/dhclient.$netif.pid -lf /tmp/dhclient.$netif.lease $netif \
-        || echo "dhcp failed"
+
+    while [ $_COUNT -lt $_DHCPRETRY ]; do
+        info "Starting dhcp for interface $netif"
+        dhclient "$@" \
+                 ${_timeout:+-timeout $_timeout} \
+                 -q \
+                 -cf /etc/dhclient.conf \
+                 -pf /tmp/dhclient.$netif.pid \
+                 -lf /tmp/dhclient.$netif.lease \
+                 $netif \
+            && return 0
+        _COUNT=$(($_COUNT+1))
+        [ $_COUNT -lt $_DHCPRETRY ] && sleep 1
+    done
+    warn "dhcp for interface $netif failed"
+    return 1
 }
 
 load_ipv6() {
+    [ -d /proc/sys/net/ipv6 ] && return
     modprobe ipv6
     i=0
     while [ ! -d /proc/sys/net/ipv6 ]; do
@@ -121,23 +148,40 @@ do_ipv6auto() {
 
 # Handle static ip configuration
 do_static() {
-    strstr $ip '*:*:*' && load_ipv6
+    strglobin $ip '*:*:*' && load_ipv6
+
+    if ! linkup $netif; then
+        warn "Could not bring interface $netif up!"
+        return 1
+    fi
+
+    ip route get "$ip" | {
+        read a rest
+        if [ "$a" = "local" ]; then
+            warn "Not assigning $ip to interface $netif, cause it is already assigned!"
+            return 1
+        fi
+        return 0
+    } || return 1
 
-    linkup $netif
     [ -n "$macaddr" ] && ip link set address $macaddr dev $netif
     [ -n "$mtu" ] && ip link set mtu $mtu dev $netif
-    if strstr $ip '*:*:*'; then
+    if strglobin $ip '*:*:*'; then
         # note no ip addr flush for ipv6
         ip addr add $ip/$mask ${srv:+peer $srv} dev $netif
+        wait_for_ipv6_dad $netif
     else
+        if ! arping -f -q -D -c 2 -I $netif $ip; then
+            warn "Duplicate address detected for $ip for interface $netif."
+            return 1
+        fi
         ip addr flush dev $netif
         ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif
     fi
 
-    [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
+    [ -n "$gw" ] && echo ip route replace default via $gw dev $netif > /tmp/net.$netif.gw
     [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 
-    > /tmp/setup_net_${netif}.ok
     return 0
 }
 
@@ -179,6 +223,7 @@ if [ -e /tmp/bond.${netif}.info ]; then
 
         for slave in $bondslaves ; do
             ip link set $slave down
+            cat /sys/class/net/$slave/address > /tmp/net.${netif}.${slave}.hwaddr
             echo "+$slave" > /sys/class/net/$bondname/bonding/slaves
             linkup $slave
         done
@@ -207,7 +252,7 @@ if [ -e /tmp/team.info ]; then
             fi
         done
         # Do not add slaves now
-        teamd -d -U -n -t $teammaster -f /etc/teamd/$teammaster.conf
+        teamd -d -U -n -N -t $teammaster -f /etc/teamd/$teammaster.conf
         for slave in $working_slaves; do
             # team requires the slaves to be down before joining team
             ip link set $slave down
@@ -225,7 +270,7 @@ if [ -e /tmp/bridge.info ]; then
     if [ "$netif" = "$bridgename" ] && [ ! -e /tmp/net.$bridgename.up ]; then
         brctl addbr $bridgename
         brctl setfd $bridgename 0
-        for ethname in $ethnames ; do
+        for ethname in $bridgeslaves ; do
             if [ "$ethname" = "$bondname" ] ; then
                 DO_BOND_SETUP=yes ifup $bondname -m
             elif [ "$ethname" = "$teammaster" ] ; then
@@ -264,18 +309,15 @@ if [ "$netif" = "$vlanname" ] && [ ! -e /tmp/net.$vlanname.up ]; then
     ip link set "$vlanname" up
 fi
 
-# setup nameserver
-namesrv=$(getargs nameserver)
-if  [ -n "$namesrv" ] ; then
-    for s in $namesrv; do
-        echo nameserver $s
-    done
-fi >> /tmp/net.$netif.resolv.conf
-
 # No ip lines default to dhcp
 ip=$(getarg ip)
 
 if [ -z "$ip" ]; then
+    for s in $(getargs nameserver); do
+        [ -n "$s" ] || continue
+        echo nameserver $s >> /tmp/net.$netif.resolv.conf
+    done
+
     if [ "$netroot" = "dhcp6" ]; then
         do_dhcp -6
     else
@@ -307,27 +349,43 @@ for p in $(getargs ip=); do
     [ "$use_bridge" != 'true' ] && \
     [ "$use_vlan" != 'true' ] && continue
 
+    # setup nameserver
+    for s in "$dns1" "$dns2" $(getargs nameserver); do
+        [ -n "$s" ] || continue
+        echo nameserver $s >> /tmp/net.$netif.resolv.conf
+    done
+
     # Store config for later use
-    for i in ip srv gw mask hostname macaddr; do
+    for i in ip srv gw mask hostname macaddr dns1 dns2; do
         eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
     done > /tmp/net.$netif.override
 
-    case $autoconf in
-        dhcp|on|any)
-            do_dhcp -4 ;;
-        dhcp6)
-            do_dhcp -6 ;;
-        auto6)
-            do_ipv6auto ;;
-        *)
-            do_static ;;
-    esac
+    for autoopt in $(str_replace "$autoconf" "," " "); do
+        case $autoopt in
+            dhcp|on|any)
+                do_dhcp -4 ;;
+            dhcp6)
+                load_ipv6
+                do_dhcp -6 ;;
+            auto6)
+                do_ipv6auto ;;
+            *)
+                do_static ;;
+        esac
+    done
+    ret=$?
+
+    > /tmp/net.${netif}.up
+
+    if [ -e /sys/class/net/${netif}/address ]; then
+        > /tmp/net.$(cat /sys/class/net/${netif}/address).up
+    fi
 
     case $autoconf in
         dhcp|on|any|dhcp6)
             ;;
         *)
-            if [ $? -eq 0 ]; then
+            if [ $ret -eq 0 ]; then
                 setup_net $netif
                 source_hook initqueue/online $netif
                 if [ -z "$manualup" ]; then
@@ -348,8 +406,22 @@ if [ -n "$DO_BOND_SETUP" -o -n "$DO_TEAM_SETUP" -o -n "$DO_VLAN_SETUP" ]; then
 fi
 
 # no ip option directed at our interface?
-if [ ! -e /tmp/setup_net_${netif}.ok ]; then
-    do_dhcp -4
+if [ ! -e /tmp/net.${netif}.up ]; then
+    if [ -e /tmp/net.bootdev ]; then
+        BOOTDEV=$(cat /tmp/net.bootdev)
+        if [ "$netif" = "$BOOTDEV" ] || [ "$BOOTDEV" = "$(cat /sys/class/net/${netif}/address)" ]; then
+            load_ipv6
+            do_dhcp
+        fi
+    else
+        if getargs 'ip=dhcp6'; then
+            load_ipv6
+            do_dhcp -6
+        fi
+        if getargs 'ip=dhcp'; then
+            do_dhcp -4
+        fi
+    fi
 fi
 
 exit 0

modules.d/40network/kill-dhclient.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 for f in /tmp/dhclient.*.pid; do
     [ -e $f ] || continue

modules.d/40network/module-setup.sh

@@ -1,77 +1,23 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
     local _program
 
-    for _program in ip arping dhclient ; do
-        if ! type -P $_program >/dev/null; then
-            derror "Could not find program \"$_program\" required by network."
-            return 1
-        fi
-    done
+    require_binaries ip arping dhclient || return 1
 
     return 255
 }
 
 # called by dracut
 depends() {
+    echo "kernel-network-modules"
     return 0
 }
 
 # called by dracut
 installkernel() {
-    # Include wired net drivers, excluding wireless
-
-    net_module_filter() {
-        local _net_drivers='eth_type_trans|register_virtio_device|usbnet_open'
-        local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
-        local _ret
-        # subfunctions inherit following FDs
-        local _merge=8 _side2=9
-        function nmf1() {
-            local _fname _fcont
-            while read _fname; do
-                [[ $_fname =~ $_unwanted_drivers ]] && continue
-                case "$_fname" in
-                    *.ko)    _fcont="$(<        $_fname)" ;;
-                    *.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
-                    *.ko.xz) _fcont="$(xz -dc   $_fname)" ;;
-                esac
-                [[   $_fcont =~ $_net_drivers
-                && ! $_fcont =~ iw_handler_get_spy ]] \
-                && echo "$_fname"
-            done
-            return 0
-        }
-        function rotor() {
-            local _f1 _f2
-            while read _f1; do
-                echo "$_f1"
-                if read _f2; then
-                    echo "$_f2" 1>&${_side2}
-                fi
-            done | nmf1 1>&${_merge}
-            return 0
-        }
-        # Use two parallel streams to filter alternating modules.
-        set +x
-        eval "( ( rotor ) ${_side2}>&1 | nmf1 ) ${_merge}>&1"
-        [[ $debug ]] && set -x
-        return 0
-    }
-
-    { find_kernel_modules_by_path drivers/net; if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then find_kernel_modules_by_path drivers/s390/net; fi; } \
-        | net_module_filter | instmods
-
-    #instmods() will take care of hostonly
-    instmods \
-        =drivers/net/phy \
-        =drivers/net/team \
-        =drivers/net/ethernet \
-        ecb arc4 bridge stp llc ipv6 bonding 8021q af_packet virtio_net
+    return 0
 }
 
 # called by dracut
@@ -86,7 +32,8 @@ install() {
     inst_script "$moddir/netroot.sh" "/sbin/netroot"
     inst_script "$moddir/dhclient-script.sh" "/sbin/dhclient-script"
     inst_simple "$moddir/net-lib.sh" "/lib/net-lib.sh"
-    inst_simple "$moddir/dhclient.conf" "/etc/dhclient.conf"
+    inst_simple -H "/etc/dhclient.conf"
+    cat "$moddir/dhclient.conf" >> "${initdir}/etc/dhclient.conf"
     inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
     inst_hook pre-udev 60 "$moddir/net-genrules.sh"
     inst_hook cmdline 91 "$moddir/dhcp-root.sh"

modules.d/40network/net-genrules.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 getargbool 0 rd.neednet && NEEDNET=1
 
@@ -16,7 +14,7 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh
     # bridge: attempt only the defined interface
     if [ -e /tmp/bridge.info ]; then
         . /tmp/bridge.info
-        IFACES="$IFACES ${ethnames%% *}"
+        IFACES="$IFACES ${bridgeslaves%% *}"
         MASTER_IFACES="$MASTER_IFACES $bridgename"
     fi
 
@@ -52,7 +50,6 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh
     fi
 
     ifup='/sbin/ifup $env{INTERFACE}'
-    [ -z "$netroot" ] && ifup="$ifup -m"
 
     runcmd="RUN+=\"/sbin/initqueue --name ifup-\$env{INTERFACE} --unique --onetime $ifup\""
 
@@ -89,7 +86,7 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh
 
         for iface in $wait_ifaces; do
             if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then
-                echo "[ -f /tmp/setup_net_${iface}.ok ]" >$hookdir/initqueue/finished/wait-$iface.sh
+                echo "[ -f /tmp/net.${iface}.did-setup ]" >$hookdir/initqueue/finished/wait-$iface.sh
             fi
         done
     # Default: We don't know the interface to use, handle all

modules.d/40network/net-lib.sh

@@ -1,12 +1,23 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+is_ip() {
+    echo "$1" | {
+        IFS=. read a b c d
+        test "$a" -ge 0 -a "$a" -le 255 \
+             -a "$b" -ge 0 -a "$b" -le 255 \
+             -a "$c" -ge 0 -a "$c" -le 255 \
+             -a "$d" -ge 0 -a "$d" -le 255 \
+             2> /dev/null
+    } && return 0
+    return 1
+}
 
 get_ip() {
     local iface="$1" ip=""
     ip=$(ip -o -f inet addr show $iface)
     ip=${ip%%/*}
     ip=${ip##* }
+    echo $ip
 }
 
 iface_for_remote_addr() {
@@ -62,6 +73,14 @@ all_ifaces_up() {
     done
 }
 
+all_ifaces_setup() {
+    local iface="" IFACES=""
+    [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
+    for iface in $IFACES; do
+        [ -e /tmp/net.$iface.did-setup ] || return 1
+    done
+}
+
 get_netroot_ip() {
     local prefix="" server="" rest=""
     splitsep "$1" ":" prefix server rest
@@ -82,22 +101,48 @@ ifdown() {
     ip addr flush dev $netif
     echo "#empty" > /etc/resolv.conf
     rm -f -- /tmp/net.$netif.did-setup
+    [ -e /sys/class/net/$netif/address ] && \
+        rm -f -- /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
     # TODO: send "offline" uevent?
 }
 
 setup_net() {
     local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES=""
+    local _p
     [ -e /tmp/net.$netif.did-setup ] && return
+    [ -e /sys/class/net/$netif/address ] && \
+        [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && return
     [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
     [ -z "$IFACES" ] && IFACES="$netif"
     # run the scripts written by ifup
-    [ -e /tmp/net.$netif.gw ]            && . /tmp/net.$netif.gw
     [ -e /tmp/net.$netif.hostname ]      && . /tmp/net.$netif.hostname
     [ -e /tmp/net.$netif.override ]      && . /tmp/net.$netif.override
     [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
     # set up resolv.conf
     [ -e /tmp/net.$netif.resolv.conf ] && \
         cp -f /tmp/net.$netif.resolv.conf /etc/resolv.conf
+    [ -e /tmp/net.$netif.gw ]            && . /tmp/net.$netif.gw
+
+    # add static route
+    for _p in $(getargs rd.route); do
+        route_to_var "$_p" || continue
+        [ -n "$route_dev" ] && [ "$route_dev" != "$netif" ] && continue
+        ip route add "$route_mask" ${route_gw:+via "$route_gw"} ${route_dev:+dev "$route_dev"}
+        if strstr "$route_mask" ":"; then
+            printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
+                > /tmp/net.route6."$netif"
+        else
+            printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
+                > /tmp/net.route."$netif"
+        fi
+    done
+
+    # If a static route was necessary to reach the gateway, the
+    # first gateway setup call will have failed with
+    #     RTNETLINK answers: Network is unreachable
+    # Replace the default route again after static routes to cover
+    # this scenario.
+    [ -e /tmp/net.$netif.gw ]            && . /tmp/net.$netif.gw
 
     # Handle STP Timeout: arping the default gateway.
     # (or the root server, if a) it's local or b) there's no gateway.)
@@ -123,12 +168,14 @@ setup_net() {
         read layer2 < /sys/class/net/$netif/device/layer2
     fi
 
-    if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! arping -q -f -w 60 -I $netif $dest ; then
-        info "Resolving $dest via ARP on $netif failed"
+    if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! strstr "$dest" ":"; then
+        arping -q -f -w 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed"
     fi
     unset layer2
 
     > /tmp/net.$netif.did-setup
+    [ -e /sys/class/net/$netif/address ] && \
+        > /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
 }
 
 save_netinfo() {
@@ -170,7 +217,7 @@ set_ifname() {
 fix_bootif() {
     local macaddr=${1}
     local IFS='-'
-    macaddr=$(for i in ${macaddr} ; do echo -n $i:; done)
+    macaddr=$(printf '%s:' ${macaddr})
     macaddr=${macaddr%:}
     # strip hardware type field from pxelinux
     [ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:}
@@ -185,6 +232,7 @@ ibft_to_cmdline() {
         for iface in /sys/firmware/ibft/ethernet*; do
             local mac="" dev=""
             local dhcp="" ip="" gw="" mask="" hostname=""
+            local dns1 dns2
 
             [ -e ${iface}/mac ] || continue
             mac=$(read a < ${iface}/mac; echo $a)
@@ -202,10 +250,15 @@ ibft_to_cmdline() {
                 # skip not assigned ip adresses
                 [ "$ip" = "0.0.0.0" ] && continue
                 [ -e ${iface}/gateway ] && gw=$(read a < ${iface}/gateway; echo $a)
+                [ "$gateway" = "0.0.0.0" ] && unset $gateway
                 [ -e ${iface}/subnet-mask ] && mask=$(read a < ${iface}/subnet-mask; echo $a)
+                [ -e ${iface}/primary-dns ] && dns1=$(read a < ${iface}/primary-dns; echo $a)
+                [ "$dns1" = "0.0.0.0" ] && unset $dns1
+                [ -e ${iface}/secondary-dns ] && dns2=$(read a < ${iface}/secondary-dns; echo $a)
+                [ "$dns2" = "0.0.0.0" ] && unset $dns2
                 [ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a)
                 if [ -n "$ip" ] && [ -n "$mask" ]; then
-                    echo "ip=$ip::$gw:$mask:$hostname:$dev:none"
+                    echo "ip=$ip::$gw:$mask:$hostname:$dev:none${dns1:+:$dns1}${dns2:+:$dns2}"
                 else
                     warn "${iface} does not contain a valid iBFT configuration"
                     warn "ip-addr=$ip"
@@ -219,20 +272,25 @@ ibft_to_cmdline() {
             fi
 
             if [ -e ${iface}/vlan ]; then
-               vlan=$(read a < ${iface}/vlan; echo $a)
-               if [ "$vlan" -ne "0" ]; then
-                   case "$vlan" in
-                       [0-9]*)
-                           echo "vlan=$dev.$vlan:$dev"
-                           ;;
-                       *)
-                           echo "vlan=$vlan:$dev"
-                           ;;
-                   esac
-               fi
+                vlan=$(read a < ${iface}/vlan; echo $a)
+                if [ "$vlan" -ne "0" ]; then
+                    case "$vlan" in
+                        [0-9]*)
+                            echo "vlan=$dev.$vlan:$dev"
+                            echo $mac > /tmp/net.${dev}.${vlan}.has_ibft_config
+                            ;;
+                        *)
+                            echo "vlan=$vlan:$dev"
+                            echo $mac > /tmp/net.${vlan}.has_ibft_config
+                            ;;
+                    esac
+                else
+                    echo $mac > /tmp/net.${dev}.has_ibft_config
+                fi
+            else
+                echo $mac > /tmp/net.${dev}.has_ibft_config
             fi
 
-            echo $mac > /tmp/net.${dev}.has_ibft_config
         done
     ) >> /etc/cmdline.d/40-ibft.conf
 }
@@ -242,66 +300,63 @@ parse_iscsi_root()
     local v
     v=${1#iscsi:}
 
-# extract authentication info
+    # extract authentication info
     case "$v" in
-	*@*:*:*:*:*)
-	    authinfo=${v%%@*}
-	    v=${v#*@}
-    # allow empty authinfo to allow having an @ in iscsi_target_name like this:
-    # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
-	    if [ -n "$authinfo" ]; then
-		OLDIFS="$IFS"
-		IFS=:
-		set $authinfo
-		IFS="$OLDIFS"
-		if [ $# -gt 4 ]; then
-		    warn "Wrong authentication info in iscsi: parameter!"
-		    return 1
-		fi
-		iscsi_username=$1
-		iscsi_password=$2
-		if [ $# -gt 2 ]; then
-		    iscsi_in_username=$3
-		    iscsi_in_password=$4
-		fi
-	    fi
-	    ;;
+        *@*:*:*:*:*)
+            authinfo=${v%%@*}
+            v=${v#*@}
+            # allow empty authinfo to allow having an @ in iscsi_target_name like this:
+            # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
+            if [ -n "$authinfo" ]; then
+                OLDIFS="$IFS"
+                IFS=:
+                set $authinfo
+                IFS="$OLDIFS"
+                if [ $# -gt 4 ]; then
+                    warn "Wrong authentication info in iscsi: parameter!"
+                    return 1
+                fi
+                iscsi_username=$1
+                iscsi_password=$2
+                if [ $# -gt 2 ]; then
+                    iscsi_in_username=$3
+                    iscsi_in_password=$4
+                fi
+            fi
+            ;;
     esac
 
-# extract target ip
+    # extract target ip
     case "$v" in
-	[[]*[]]:*)
-	    iscsi_target_ip=${v#[[]}
-		iscsi_target_ip=${iscsi_target_ip%%[]]*}
-	    v=${v#[[]$iscsi_target_ip[]]:}
-	    ;;
-	*)
-	    iscsi_target_ip=${v%%[:]*}
-	    v=${v#$iscsi_target_ip:}
-	    ;;
+        [[]*[]]:*)
+            iscsi_target_ip=${v#[[]}
+                iscsi_target_ip=${iscsi_target_ip%%[]]*}
+            v=${v#[[]$iscsi_target_ip[]]:}
+            ;;
+        *)
+            iscsi_target_ip=${v%%[:]*}
+            v=${v#$iscsi_target_ip:}
+            ;;
     esac
 
-# extract target name
+    unset iscsi_target_name
+    # extract target name
     case "$v" in
-	*:iqn.*)
-	    iscsi_target_name=iqn.${v##*:iqn.}
-	    v=${v%:iqn.*}:
-	    ;;
-	*:eui.*)
-	    iscsi_target_name=iqn.${v##*:eui.}
-	    v=${v%:iqn.*}:
-	    ;;
-	*:naa.*)
-	    iscsi_target_name=iqn.${v##*:naa.}
-	    v=${v%:iqn.*}:
-	    ;;
-	*)
-	    warn "Invalid iscii target name, should begin with 'iqn.' or 'eui.' or 'naa.'"
-	    return 1
-	    ;;
+        *:iqn.*)
+            iscsi_target_name=iqn.${v##*:iqn.}
+            v=${v%:iqn.*}:
+            ;;
+        *:eui.*)
+            iscsi_target_name=eui.${v##*:eui.}
+            v=${v%:eui.*}:
+            ;;
+        *:naa.*)
+            iscsi_target_name=naa.${v##*:naa.}
+            v=${v%:naa.*}:
+            ;;
     esac
 
-# parse the rest
+    # parse the rest
     OLDIFS="$IFS"
     IFS=:
     set $v
@@ -309,17 +364,34 @@ parse_iscsi_root()
 
     iscsi_protocol=$1; shift # ignored
     iscsi_target_port=$1; shift
-    if [ $# -eq 3 ]; then
-	iscsi_iface_name=$1; shift
+
+    if [ -n "$iscsi_target_name" ]; then
+        if [ $# -eq 3 ]; then
+            iscsi_iface_name=$1; shift
+        fi
+        if [ $# -eq 2 ]; then
+            iscsi_netdev_name=$1; shift
+        fi
+        iscsi_lun=$1; shift
+        if [ $# -ne 0 ]; then
+            warn "Invalid parameter in iscsi: parameter!"
+            return 1
+        fi
+        return 0
     fi
-    if [ $# -eq 2 ]; then
-	iscsi_netdev_name=$1; shift
+
+
+    if [ $# -gt 3 ] && [ -n "$1$2" ]; then
+        if [ -z "$3" ] || [ "$3" -ge 0 ]  2>/dev/null ; then
+            iscsi_iface_name=$1; shift
+            iscsi_netdev_name=$1; shift
+        fi
     fi
+
     iscsi_lun=$1; shift
-    if [ $# -ne 0 ]; then
-	warn "Invalid parameter in iscsi: parameter!"
-	return 1
-    fi
+
+    iscsi_target_name=$(printf "%s:" "$@")
+    iscsi_target_name=${iscsi_target_name%:}
 }
 
 ip_to_var() {
@@ -339,7 +411,7 @@ ip_to_var() {
         fi
     done
 
-    unset ip srv gw mask hostname dev autoconf macaddr mtu
+    unset ip srv gw mask hostname dev autoconf macaddr mtu dns1 dns2
     case $# in
         0)  autoconf="error" ;;
         1)  autoconf=$1 ;;
@@ -347,17 +419,28 @@ ip_to_var() {
         3)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2; [ -n "$3" ] && mtu=$3 ;;
         4)  [ -n "$1" ] && dev=$1; [ -n "$2" ] && autoconf=$2; [ -n "$3" ] && mtu=$3; [ -n "$4" ] && macaddr=$4 ;;
         *)  [ -n "$1" ] && ip=$1; [ -n "$2" ] && srv=$2; [ -n "$3" ] && gw=$3; [ -n "$4" ] && mask=$4;
-            [ -n "$5" ] && hostname=$5; [ -n "$6" ] && dev=$6; [ -n "$7" ] && autoconf=$7; [ -n "$8" ] && mtu=$8;
-            if [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
-                macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
-            fi
-	    ;;
+            [ -n "$5" ] && hostname=$5; [ -n "$6" ] && dev=$6; [ -n "$7" ] && autoconf=$7;
+            case "$8" in
+                [0-9]*:*|[0-9]*.[0-9]*.[0-9]*.[0-9]*)
+                    dns1="$8"
+                    [ -n "$9" ] && dns2="$9"
+                    ;;
+                [0-9]*)
+                    mtu="$8"
+                    ;;
+                *)
+                    if [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
+                        macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
+                    fi
+                    ;;
+            esac
+            ;;
     esac
 
     # ip=<ipv4-address> means anaconda-style static config argument cluster:
     # ip=<ip> gateway=<gw> netmask=<nm> hostname=<host> mtu=<mtu>
     # ksdevice={link|bootif|ibft|<MAC>|<ifname>}
-    if strstr "$autoconf" "*.*.*.*"; then
+    if strglob "$autoconf" "*.*.*.*"; then
         ip="$autoconf"
         gw=$(getarg gateway=)
         mask=$(getarg netmask=)
@@ -375,6 +458,33 @@ ip_to_var() {
     fi
 }
 
+route_to_var() {
+    local v=${1}:
+    local i
+    set --
+    while [ -n "$v" ]; do
+        if [ "${v#\[*:*:*\]:}" != "$v" ]; then
+            # handle IPv6 address
+            i="${v%%\]:*}"
+            i="${i##\[}"
+            set -- "$@" "$i"
+            v=${v#\[$i\]:}
+        else
+            set -- "$@" "${v%%:*}"
+            v=${v#*:}
+        fi
+    done
+
+    unset route_mask route_gw route_dev
+    case $# in
+        2)  [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"
+            return 0;;
+        3)  [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"; [ -n "$3" ] && route_dev="$3"
+            return 0;;
+        *)  return 1;;
+    esac
+}
+
 parse_ifname_opts() {
     local IFS=:
     set $1
@@ -405,7 +515,11 @@ parse_ifname_opts() {
 wait_for_if_link() {
     local cnt=0
     local li
-    while [ $cnt -lt 600 ]; do
+    local timeout="$(getargs rd.net.timeout.iflink=)"
+    timeout=${timeout:-60}
+    timeout=$(($timeout*10))
+
+    while [ $cnt -lt $timeout ]; do
         li=$(ip -o link show dev $1 2>/dev/null)
         [ -n "$li" ] && return 0
         sleep 0.1
@@ -417,9 +531,29 @@ wait_for_if_link() {
 wait_for_if_up() {
     local cnt=0
     local li
-    while [ $cnt -lt 200 ]; do
+    local timeout="$(getargs rd.net.timeout.ifup=)"
+    timeout=${timeout:-20}
+    timeout=$(($timeout*10))
+
+    while [ $cnt -lt $timeout ]; do
         li=$(ip -o link show up dev $1)
-        [ -n "$li" ] && [ -z "${li##*state UP*}" ] && return 0
+        if ! strstr "$li" "NO-CARRIER"; then
+            if [ -n "$li" ]; then
+                case "$li" in
+                    *\<UP*)
+                        return 0;;
+                    *\<*,UP\>*)
+                        return 0;;
+                    *\<*,UP,*\>*)
+                        return 0;;
+                esac
+            fi
+            if strstr "$li" "LOWER_UP" \
+                    && strstr "$li" "state UNKNOWN" \
+                    && ! strstr "$li" "DORMANT"; then
+                return 0
+            fi
+        fi
         sleep 0.1
         cnt=$(($cnt+1))
     done
@@ -428,7 +562,11 @@ wait_for_if_up() {
 
 wait_for_route_ok() {
     local cnt=0
-    while [ $cnt -lt 200 ]; do
+    local timeout="$(getargs rd.net.timeout.route=)"
+    timeout=${timeout:-20}
+    timeout=$(($timeout*10))
+
+    while [ $cnt -lt $timeout ]; do
         li=$(ip route show)
         [ -n "$li" ] && [ -z "${li##*$1*}" ] && return 0
         sleep 0.1
@@ -437,12 +575,34 @@ wait_for_route_ok() {
     return 1
 }
 
+wait_for_ipv6_dad() {
+    local cnt=0
+    local li
+    local timeout="$(getargs rd.net.timeout.ipv6dad=)"
+    timeout=${timeout:-50}
+    timeout=$(($timeout*10))
+
+    while [ $cnt -lt $timeout ]; do
+        li=$(ip -6 addr show dev $1 scope link)
+        strstr "$li" "tentative" || return 0
+        sleep 0.1
+        cnt=$(($cnt+1))
+    done
+    return 1
+}
+
 wait_for_ipv6_auto() {
     local cnt=0
     local li
-    while [ $cnt -lt 400 ]; do
+    local timeout="$(getargs rd.net.timeout.ipv6auto=)"
+    timeout=${timeout:-40}
+    timeout=$(($timeout*10))
+
+    while [ $cnt -lt $timeout ]; do
         li=$(ip -6 addr show dev $1)
-        strstr "$li" "dynamic" && return 0
+        if ! strstr "$li" "tentative"; then
+            strstr "$li" "dynamic" && return 0
+        fi
         sleep 0.1
         cnt=$(($cnt+1))
     done
@@ -456,18 +616,27 @@ linkup() {
 }
 
 type hostname >/dev/null 2>&1 || \
-hostname() {
-	cat /proc/sys/kernel/hostname
+    hostname() {
+    cat /proc/sys/kernel/hostname
 }
 
 iface_has_link() {
+    local cnt=0
     local interface="$1" flags=""
     [ -n "$interface" ] || return 2
     interface="/sys/class/net/$interface"
     [ -d "$interface" ] || return 2
+    local timeout="$(getargs rd.net.timeout.carrier=)"
+    timeout=${timeout:-5}
+    timeout=$(($timeout*10))
+
     linkup "$1"
-    [ "$(cat $interface/carrier)" = 1 ] || return 1
-    # XXX Do we need to reset the flags here? anaconda never bothered..
+    while [ $cnt -lt $timeout ]; do
+        [ "$(cat $interface/carrier)" = 1 ] && return 0
+        sleep 0.1
+        cnt=$(($cnt+1))
+    done
+    return 1
 }
 
 find_iface_with_link() {
@@ -482,3 +651,69 @@ find_iface_with_link() {
     done
     return 1
 }
+
+is_persistent_ethernet_name() {
+    local _netif="$1"
+    local _name_assign_type="0"
+
+    [ -f "/sys/class/net/$_netif/name_assign_type" ] \
+        && _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
+
+    # NET_NAME_ENUM 1
+    [ "$_name_assign_type" = "1" ] && return 1
+
+    # NET_NAME_PREDICTABLE 2
+    [ "$_name_assign_type" = "2" ] && return 0
+
+    case "$_netif" in
+        # udev persistent interface names
+        eno[0-9]|eno[0-9][0-9]|eno[0-9][0-9][0-9]*)
+            ;;
+        ens[0-9]|ens[0-9][0-9]|ens[0-9][0-9][0-9]*)
+            ;;
+        enp[0-9]s[0-9]*|enp[0-9][0-9]s[0-9]*|enp[0-9][0-9][0-9]*s[0-9]*)
+            ;;
+        enP*p[0-9]s[0-9]*|enP*p[0-9][0-9]s[0-9]*|enP*p[0-9][0-9][0-9]*s[0-9]*)
+            ;;
+        # biosdevname
+        em[0-9]|em[0-9][0-9]|em[0-9][0-9][0-9]*)
+            ;;
+        p[0-9]p[0-9]*|p[0-9][0-9]p[0-9]*|p[0-9][0-9][0-9]*p[0-9]*)
+            ;;
+        *)
+            return 1
+    esac
+    return 0
+}
+
+is_kernel_ethernet_name() {
+    local _netif="$1"
+    local _name_assign_type="1"
+
+    if [ -e "/sys/class/net/$_netif/name_assign_type" ]; then
+        _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
+
+        case "$_name_assign_type" in
+            2|3|4)
+                # NET_NAME_PREDICTABLE 2
+                # NET_NAME_USER 3
+                # NET_NAME_RENAMED 4
+                return 1
+                ;;
+            1|*)
+                # NET_NAME_ENUM 1
+                return 0
+                ;;
+        esac
+    fi
+
+    # fallback to error prone manual name check
+    case "$_netif" in
+        eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]*)
+            return 0
+            ;;
+        *)
+            return 1
+    esac
+
+}

modules.d/40network/netroot.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 PATH=/usr/sbin:/usr/bin:/sbin:/bin
 command -v getarg >/dev/null    || . /lib/dracut-lib.sh
@@ -14,6 +12,11 @@ command -v setup_net >/dev/null || . /lib/net-lib.sh
 # no sense in doing something if no (net)root info is available
 # or root is already there
 [ -d $NEWROOT/proc ] && exit 0
+
+if [ -z "$netroot" ]; then
+    netroot=$(getarg netroot=)
+fi
+
 [ -z "$netroot" ] && exit 1
 
 # Set or override primary interface
@@ -35,7 +38,7 @@ esac
 # Figure out the handler for root=dhcp by recalling all netroot cmdline
 # handlers when this is not called from manually network bringing up.
 if [ -z "$2" ]; then
-    if [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] ; then
+    if getarg "root=dhcp" || getarg "netroot=dhcp" || getarg "root=dhcp6" || getarg "netroot=dhcp6"; then
         # Load dhcp options
         [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
 
@@ -47,6 +50,8 @@ if [ -z "$2" ]; then
             exit 1
         fi
 
+        rm -f -- $hookdir/initqueue/finished/dhcp.sh
+
         # Set netroot to new_root_path, so cmdline parsers don't call
         netroot=$new_root_path
 
@@ -76,9 +81,7 @@ source_hook netroot $netif
 
 # Run the handler; don't store the root, it may change from device to device
 # XXX other variables to export?
-if $handler $netif $netroot $NEWROOT; then
-    rm -f -- $hookdir/initqueue/finished/dhcp.sh
-    # Network rootfs mount successful - save interface info for ifcfg etc.
-    save_netinfo $netif
-fi
+[ -n "$handler" ] && "$handler" "$netif" "$netroot" "$NEWROOT"
+save_netinfo $netif
+
 exit 0

modules.d/40network/parse-bridge.sh

@@ -1,11 +1,9 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Format:
-#       bridge=<bridgename>:<ethnames>
+#       bridge=<bridgename>:<bridgeslaves>
 #
-#       <ethnames> is a comma-separated list of physical (ethernet) interfaces
+#       <bridgeslaves> is a comma-separated list of physical (ethernet) interfaces
 #       bridge without parameters assumes bridge=br0:eth0
 #
 
@@ -25,20 +23,20 @@ parsebridge() {
         v=${v#*:}
     done
 
-    unset bridgename ethnames
+    unset bridgename bridgeslaves
     case $# in
-        0)  bridgename=br0; ethnames=$iface ;;
+        0)  bridgename=br0; bridgeslaves=$iface ;;
         1)  die "bridge= requires two parameters" ;;
-        2)  bridgename=$1; ethnames=$(str_replace "$2" "," " ") ;;
+        2)  bridgename=$1; bridgeslaves=$(str_replace "$2" "," " ") ;;
         *)  die "bridge= requires two parameters" ;;
     esac
 }
 
-unset bridgename ethnames
+unset bridgename bridgeslaves
 
 iface=eth0
 
-# Parse bridge for bridgename and ethnames
+# Parse bridge for bridgename and bridgeslaves
 if bridge="$(getarg bridge)"; then
     # Read bridge= parameters if they exist
     if [ -n "$bridge" ]; then
@@ -47,9 +45,9 @@ if bridge="$(getarg bridge)"; then
     # Simple default bridge
     if [ -z "$bridgename" ]; then
         bridgename=br0
-        ethnames=$iface
+        bridgeslaves=$iface
     fi
     echo "bridgename=$bridgename" > /tmp/bridge.info
-    echo "ethnames=\"$ethnames\"" >> /tmp/bridge.info
+    echo "bridgeslaves=\"$bridgeslaves\"" >> /tmp/bridge.info
     return
 fi

modules.d/40network/parse-ibft.sh

@@ -1,10 +1,10 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 command -v getarg >/dev/null          || . /lib/dracut-lib.sh
 command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
 
-# If ibft is requested, read ibft vals and write ip=XXX cmdline args
-[ "ibft" = "$(getarg ip=)" ] && ibft_to_cmdline
-
+if getargbool 0 rd.iscsi.ibft -d "ip=ibft"; then
+    modprobe -b -q iscsi_boot_sysfs 2>/dev/null
+    modprobe -b -q iscsi_ibft
+    ibft_to_cmdline
+fi

modules.d/40network/parse-ifname.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Format:
 #       ifname=<interface>:<mac>

modules.d/40network/parse-ip-opts.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Format:
 #       ip=[dhcp|on|any]
@@ -25,6 +23,10 @@ fi
 if [ -z "$NEEDBOOTDEV" ] ; then
     count=0
     for p in $(getargs ip=); do
+        case "$p" in
+            ibft)
+                continue;;
+        esac
         count=$(( $count + 1 ))
     done
     [ $count -gt 1 ] && NEEDBOOTDEV=1
@@ -34,8 +36,10 @@ unset count
 # If needed, check if bootdev= contains anything usable
 BOOTDEV=$(getarg bootdev=)
 
-if [ -n "$NEEDBOOTDEV" ] ; then
-    [ -z "$BOOTDEV" ] && warn "Please supply bootdev argument for multiple ip= lines"
+if [ -n "$NEEDBOOTDEV" ] && getargbool 1 rd.neednet; then
+    #[ -z "$BOOTDEV" ] && warn "Please supply bootdev argument for multiple ip= lines"
+    echo "rd.neednet=1" > /etc/cmdline.d/dracut-neednet.conf
+    info "Multiple ip= arguments: assuming rd.neednet=1"
 fi
 
 # Check ip= lines
@@ -46,7 +50,7 @@ for p in $(getargs ip=); do
     # make first device specified the BOOTDEV
     if [ -z "$BOOTDEV" ] && [ -n "$dev" ]; then
         BOOTDEV="$dev"
-        [ -n "$NEEDBOOTDEV" ] && warn "Setting bootdev to '$BOOTDEV'"
+        [ -n "$NEEDBOOTDEV" ] && info "Setting bootdev to '$BOOTDEV'"
     fi
 
     # skip ibft since we did it above
@@ -62,24 +66,26 @@ for p in $(getargs ip=); do
     fi
 
     # Error checking for autoconf in combination with other values
-    case $autoconf in
-        error) die "Error parsing option 'ip=$p'";;
-        bootp|rarp|both) die "Sorry, ip=$autoconf is currenty unsupported";;
-        none|off)
-            [ -z "$ip" ] && \
-            die "For argument 'ip=$p'\nValue '$autoconf' without static configuration does not make sense"
-            [ -z "$mask" ] && \
-                die "Sorry, automatic calculation of netmask is not yet supported"
-            ;;
-        auto6);;
-        dhcp|dhcp6|on|any) \
-            [ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
-            die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
-            [ -n "$ip" ] && \
-                die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoconf'"
-            ;;
-        *) die "For argument 'ip=$p'\nSorry, unknown value '$autoconf'";;
-    esac
+    for autoopt in $(str_replace "$autoconf" "," " "); do
+        case $autoopt in
+            error) die "Error parsing option 'ip=$p'";;
+            bootp|rarp|both) die "Sorry, ip=$autoopt is currenty unsupported";;
+            none|off)
+                [ -z "$ip" ] && \
+                    die "For argument 'ip=$p'\nValue '$autoopt' without static configuration does not make sense"
+                [ -z "$mask" ] && \
+                    die "Sorry, automatic calculation of netmask is not yet supported"
+                ;;
+            auto6);;
+            dhcp|dhcp6|on|any) \
+                [ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
+                    die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
+                [ -n "$ip" ] && \
+                    die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoopt'"
+                ;;
+            *) die "For argument 'ip=$p'\nSorry, unknown value '$autoopt'";;
+        esac
+    done
 
     if [ -n "$dev" ] ; then
         # We don't like duplicate device configs
@@ -105,6 +111,16 @@ for p in $(getargs ip=); do
         die "Server-ip or dhcp for netboot needed, but current arguments say otherwise"
     fi
 
+    if str_starts "$dev" "enx" && [ ${#dev} -eq 15 ]; then
+        printf -- "ifname=%s:%s:%s:%s:%s:%s:%s\n" \
+               "$dev" \
+               "${dev:3:2}" \
+               "${dev:5:2}" \
+               "${dev:7:2}" \
+               "${dev:9:2}" \
+               "${dev:11:2}" \
+               "${dev:13:2}" >> /etc/cmdline.d/80-enx.conf
+    fi
 done
 
 # put BOOTIF in IFACES to make sure it comes up

modules.d/45ifcfg/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
@@ -10,6 +8,7 @@ check() {
 
 # called by dracut
 depends() {
+    echo "network"
     return 0
 }
 

modules.d/45ifcfg/write-ifcfg.sh

@@ -1,8 +1,8 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # NFS root might have reached here before /tmp/net.ifaces was written
+type is_persistent_ethernet_name >/dev/null 2>&1 || . /lib/net-lib.sh
+
 udevadm settle --timeout=30
 
 if [ -e /tmp/bridge.info ]; then
@@ -22,7 +22,7 @@ get_config_line_by_subchannel()
     local line
 
     CHANNELS="$1"
-    while read line; do
+    while read line || [ -n "$line" ]; do
         if strstr "$line" "$CHANNELS"; then
             echo $line
             return 0
@@ -48,16 +48,16 @@ print_s390() {
         for i in /sys/class/net/$_netif/device/cdev[0-9]*; do
             [ -e $i ] || continue
             channel=$(readlink -f $i)
-            echo -n "${channel##*/},"
+            printf '%s' "${channel##*/},"
         done
     })
     [ -n "$SUBCHANNELS" ] || return 1
 
     SUBCHANNELS=${SUBCHANNELS%,}
     echo "SUBCHANNELS=\"${SUBCHANNELS}\""
-    CONFIG_LINE=$(get_config_line_by_subchannel $SUBCHANNELS)
 
-    [ $? -ne 0 -o -z "$CONFIG_LINE" ] && return
+    CONFIG_LINE=$(get_config_line_by_subchannel $SUBCHANNELS)
+    [ $? -ne 0 -o -z "$CONFIG_LINE" ] && return 0
 
     OLD_IFS=$IFS
     IFS=","
@@ -77,6 +77,44 @@ print_s390() {
     OPTIONS=${OPTIONS## }
     echo "NETTYPE=\"${NETTYPE}\""
     echo "OPTIONS=\"${OPTIONS}\""
+    return 0
+}
+
+hw_bind() {
+    local _netif="$1"
+    local _macaddr="$2"
+
+    [ -n "$_macaddr" ] \
+        && echo "MACADDR=\"$_macaddr\""
+
+    print_s390 "$_netif" \
+        && return 0
+
+    [ -n "$_macaddr" ] && return 0
+
+    is_persistent_ethernet_name "$_netif" && return 0
+
+    [ -f "/sys/class/net/$_netif/addr_assign_type" ] \
+        && [ "$(cat "/sys/class/net/$_netif/addr_assign_type")" != "0" ] \
+        && return 1
+
+    [ -f "/sys/class/net/$_netif/address" ] \
+        || return 1
+
+    echo "HWADDR=\"$(cat /sys/class/net/$_netif/address)\""
+}
+
+interface_bind() {
+    local _netif="$1"
+    local _macaddr="$2"
+
+    # see, if we can bind it to some hw parms
+    if hw_bind "$_netif" "$_macaddr"; then
+        # only print out DEVICE, if it's user assigned
+        is_kernel_ethernet_name "$_netif" && return 0
+    fi
+
+    echo "DEVICE=\"$_netif\""
 }
 
 for netup in /tmp/net.*.did-setup ; do
@@ -84,6 +122,7 @@ for netup in /tmp/net.*.did-setup ; do
 
     netif=${netup%%.did-setup}
     netif=${netif##*/net.}
+    strglobin "$netif" ":*:*:*:*:" && continue
     [ -e /tmp/ifcfg/ifcfg-$netif ] && continue
     unset bridge
     unset bond
@@ -98,6 +137,8 @@ for netup in /tmp/net.*.did-setup ; do
     unset macaddr
     unset slave
     unset ethname
+    unset vlan
+
     [ -e /tmp/bond.${netif}.info ] && . /tmp/bond.${netif}.info
 
     uuid=$(cat /proc/sys/kernel/random/uuid)
@@ -110,16 +151,17 @@ for netup in /tmp/net.*.did-setup ; do
     if [ "$netif" = "$vlanname" ]; then
         vlan=yes
     fi
-    cat /sys/class/net/$netif/address > /tmp/net.$netif.hwaddr
+
     {
         echo "# Generated by dracut initrd"
-        echo "DEVICE=\"$netif\""
+        echo "NAME=\"$netif\""
+        interface_bind "$netif" "$macaddr"
         echo "ONBOOT=yes"
         echo "NETBOOT=yes"
         echo "UUID=\"$uuid\""
+        strstr "$(ip -6 addr show dev $netif)" 'inet6' && echo "IPV6INIT=yes"
         if [ -f /tmp/dhclient.$netif.lease ]; then
             [ -f /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
-            strstr "$ip" '*:*:*' && echo "IPV6INIT=yes"
             if [ -f /tmp/net.$netif.has_ibft_config ]; then
                 echo "BOOTPROTO=ibft"
             else
@@ -129,7 +171,7 @@ for netup in /tmp/net.*.did-setup ; do
         else
             # If we've booted with static ip= lines, the override file is there
             [ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override
-            if strstr "$ip" '*:*:*'; then
+            if strglobin "$ip" '*:*:*'; then
                 echo "IPV6INIT=yes"
                 echo "IPV6_AUTOCONF=no"
                 echo "IPV6ADDR=\"$ip/$mask\""
@@ -146,7 +188,7 @@ for netup in /tmp/net.*.did-setup ; do
                     fi
                 fi
             fi
-            if strstr "$gw" '*:*:*'; then
+            if strglobin "$gw" '*:*:*'; then
                 echo "IPV6_DEFAULTGW=\"$gw\""
             elif [ -n "$gw" ]; then
                 echo "GATEWAY=\"$gw\""
@@ -159,14 +201,7 @@ for netup in /tmp/net.*.did-setup ; do
     if [ -z "$bridge" ] && [ -z "$bond" ] && [ -z "$vlan" ]; then
         # standard interface
         {
-            if [ -n "$macaddr" ]; then
-                echo "MACADDR=\"$macaddr\""
-            else
-                echo "HWADDR=\"$(cat /sys/class/net/$netif/address)\""
-            fi
-            print_s390 $netif
             echo "TYPE=Ethernet"
-            echo "NAME=\"$netif\""
             [ -n "$mtu" ] && echo "MTU=\"$mtu\""
         } >> /tmp/ifcfg/ifcfg-$netif
     fi
@@ -191,17 +226,19 @@ for netup in /tmp/net.*.did-setup ; do
 
         for slave in $bondslaves ; do
             # write separate ifcfg file for the raw eth interface
-            {
+            (
                 echo "# Generated by dracut initrd"
-                echo "DEVICE=\"$slave\""
+                echo "NAME=\"$slave\""
                 echo "TYPE=Ethernet"
                 echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
-                echo "HWADDR=\"$(cat /sys/class/net/$slave/address)\""
                 echo "SLAVE=yes"
                 echo "MASTER=\"$netif\""
-                echo "NAME=\"$slave\""
-            } >> /tmp/ifcfg/ifcfg-$slave
+                echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
+                unset macaddr
+                [ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override
+                interface_bind "$slave" "$macaddr"
+            ) >> /tmp/ifcfg/ifcfg-$slave
         done
     fi
 
@@ -211,50 +248,30 @@ for netup in /tmp/net.*.did-setup ; do
             echo "TYPE=Bridge"
             echo "NAME=\"$netif\""
         } >> /tmp/ifcfg/ifcfg-$netif
-        if [ "$ethname" = "$bondname" ] ; then
-            {
-                echo "# Generated by dracut initrd"
-                echo "DEVICE=\"$bondname\""
-                echo "ONBOOT=yes"
-                echo "NETBOOT=yes"
-                # This variable is an indicator of a bond interface for initscripts
-                echo "BONDING_OPTS=\"$bondoptions\""
-                echo "BRIDGE=\"$netif\""
-                echo "NAME=\"$bondname\""
-            } >> /tmp/ifcfg/ifcfg-$bondname
-            for slave in $bondslaves ; do
-                # write separate ifcfg file for the raw eth interface
-                {
-                    echo "# Generated by dracut initrd"
-                    echo "DEVICE=\"$slave\""
-                    echo "TYPE=Ethernet"
-                    echo "ONBOOT=yes"
-                    echo "NETBOOT=yes"
-                    echo "HWADDR=\"$(cat /sys/class/net/$slave/address)\""
-                    echo "SLAVE=yes"
-                    echo "MASTER=\"$bondname\""
-                    echo "NAME=\"$slave\""
-                } >> /tmp/ifcfg/ifcfg-$slave
-            done
-        else
+        for slave in $bridgeslaves ; do
             # write separate ifcfg file for the raw eth interface
-            {
+            (
                 echo "# Generated by dracut initrd"
-                echo "DEVICE=\"$ethname\""
+                echo "NAME=\"$slave\""
                 echo "TYPE=Ethernet"
                 echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
-                echo "HWADDR=\"$(cat /sys/class/net/$ethname/address)\""
-                echo "BRIDGE=\"$netif\""
-                echo "NAME=\"$ethname\""
-            } >> /tmp/ifcfg/ifcfg-$ethname
-        fi
+                echo "BRIDGE=\"$bridgename\""
+                echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
+                unset macaddr
+                [ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override
+                interface_bind "$slave" "$macaddr"
+            ) >> /tmp/ifcfg/ifcfg-$slave
+        done
     fi
     i=1
     for ns in $(getargs nameserver); do
         echo "DNS${i}=\"${ns}\"" >> /tmp/ifcfg/ifcfg-$netif
         i=$((i+1))
     done
+
+    [ -f /tmp/net.route6."$netif" ] && cp /tmp/net.route6."$netif" /tmp/ifcfg/route6-"$netif"
+    [ -f /tmp/net.route."$netif" ] && cp /tmp/net.route."$netif" /tmp/ifcfg/route-"$netif"
 done
 
 # Pass network opts

modules.d/45url-lib/module-setup.sh

@@ -3,7 +3,7 @@
 
 # called by dracut
 check() {
-    command -v curl >/dev/null || return 1
+    require_binaries curl || return 1
     return 255
 }
 
@@ -17,6 +17,7 @@ depends() {
 install() {
     local _dir _crt _found _lib
     inst_simple "$moddir/url-lib.sh" "/lib/url-lib.sh"
+    inst_multiple -o ctorrent
     inst_multiple curl
     # also install libs for curl https
     inst_libdir_file "libnsspem.so*"

modules.d/45url-lib/url-lib.sh

@@ -82,13 +82,45 @@ set_http_header() {
     echo "header = \"$1: $2\"" >> $CURL_HOME/.curlrc
 }
 
+### TORRENT ##########################################################
+
+ctorrent_args="-E 0 -e 0"
+
+ctorrent_fetch_url() {
+    local url="$1" outloc="$2"
+    url=${url#*//}
+    torrent_outloc="$outloc.torrent"
+    echo "$url" > /proc/self/fd/0
+    if [ -n "$outloc" ]; then
+        curl $curl_args --output - -- "$url" > "$torrent_outloc" || return $?
+    else
+        local outdir="$(mkuniqdir /tmp torrent_fetch_url)"
+        ( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
+        torrent_outloc="$outdir/$(ls -A $outdir)"
+        outloc=${torrent_outloc%.*}
+    fi
+    if ! [ -f "$torrent_outloc" ]; then
+        warn "Downloading '$url' failed!"
+        return 253
+    fi
+    ctorrent $ctorrent_args -s $outloc $torrent_outloc >&2
+    if ! [ -f "$outloc" ]; then
+        warn "Torrent download of '$url' failed!"
+        return 253
+    fi
+    if [ -z "$2" ]; then echo "$outloc" ; fi
+}
+
+command -v ctorrent >/dev/null \
+    && add_url_handler ctorrent_fetch_url torrent
+
 ### NFS ##############################################################
 
 [ -e /lib/nfs-lib.sh ] && . /lib/nfs-lib.sh
 
 nfs_already_mounted() {
     local server="$1" path="$2" localdir="" s="" p=""
-    cat /proc/mounts | while read src mnt rest; do
+    cat /proc/mounts | while read src mnt rest || [ -n "$src" ]; do
         splitsep ":" "$src" s p
         if [ "$server" = "$s" ]; then
             if [ "$path" = "$p" ]; then

modules.d/50drm/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
@@ -24,7 +22,7 @@ installkernel() {
         local _merge=8 _side2=9
         function nmf1() {
             local _fname _fcont
-            while read _fname; do
+            while read _fname || [ -n "$_fname" ]; do
                 case "$_fname" in
                     *.ko)    _fcont="$(<        $_fname)" ;;
                     *.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
@@ -37,7 +35,7 @@ installkernel() {
         }
         function rotor() {
             local _f1 _f2
-            while read _f1; do
+            while read _f1 || [ -n "$_f1" ]; do
                 echo "$_f1"
                 if read _f2; then
                     echo "$_f2" 1>&${_side2}
@@ -51,14 +49,31 @@ installkernel() {
         return 0
     }
 
+    if [[ "$(uname -p)" == arm* ]]; then
+        # arm specific modules needed by drm
+        instmods \
+            "=drivers/gpu/drm/i2c" \
+            "=drivers/gpu/drm/panel" \
+            "=drivers/pwm" \
+            "=drivers/video/backlight" \
+            "=drivers/video/fbdev/omap2/displays-new" \
+            ${NULL}
+    fi
+
+    instmods amdkfd hyperv_fb
+
     for _modname in $(find_kernel_modules_by_path drivers/gpu/drm \
         | drm_module_filter) ; do
         # if the hardware is present, include module even if it is not currently loaded,
         # as we could e.g. be in the installer; nokmsboot boot parameter will disable
         # loading of the driver if needed
         if [[ $hostonly ]] && modinfo -F alias $_modname | sed -e 's,\?,\.,g' -e 's,\*,\.\*,g' \
-            | grep -qxf - /sys/bus/pci/devices/*/modalias 2>/dev/null; then
+            | grep -qxf - /sys/bus/{pci/devices,soc/devices/soc?}/*/modalias 2>/dev/null; then
             hostonly='' instmods $_modname
+            # if radeon.ko is installed, we want amdkfd also
+            if strstr "$_modname" radeon.ko; then
+                hostonly='' instmods amdkfd
+            fi
             continue
         fi
         instmods $_modname

modules.d/50gensplash/gensplash-emergency.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 CDROOT=0
 . /lib/gensplash-lib.sh

modules.d/50gensplash/gensplash-newroot.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 CDROOT=0
 . /lib/gensplash-lib.sh

modules.d/50gensplash/gensplash-pretrigger.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if getargbool 1 rd.splash -d -n rd_NO_SPLASH; then
     info "Starting Gentoo Splash"

modules.d/50gensplash/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/50plymouth/module-setup.sh

@@ -1,11 +1,9 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
-    type -P plymouthd >/dev/null && type -P plymouth >/dev/null
+    require_binaries plymouthd plymouth plymouth-set-default-theme
 }
 
 # called by dracut
@@ -15,12 +13,18 @@ depends() {
 
 # called by dracut
 install() {
-    if grep -q nash /usr/libexec/plymouth/plymouth-populate-initrd \
-        || [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
+    PKGLIBDIR="/usr/lib/plymouth"
+    if type -P dpkg-architecture &>/dev/null; then
+        PKGLIBDIR="/usr/lib/$(dpkg-architecture -qDEB_HOST_MULTIARCH)/plymouth"
+    fi
+    [ -x /usr/libexec/plymouth/plymouth-populate-initrd ] && PKGLIBDIR="/usr/libexec/plymouth"
+
+    if grep -q nash ${PKGLIBDIR}/plymouth-populate-initrd \
+        || [ ! -x ${PKGLIBDIR}/plymouth-populate-initrd ]; then
         . "$moddir"/plymouth-populate-initrd.sh
     else
         PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
-            /usr/libexec/plymouth/plymouth-populate-initrd -t "$initdir"
+            ${PKGLIBDIR}/plymouth-populate-initrd -t "$initdir"
     fi
 
     inst_hook emergency 50 "$moddir"/plymouth-emergency.sh

modules.d/50plymouth/plymouth-emergency.sh

@@ -1,4 +1,3 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
 plymouth --hide-splash 2>/dev/null || :

modules.d/50plymouth/plymouth-newroot.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if type plymouth >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
     plymouth --newroot=$NEWROOT

modules.d/50plymouth/plymouth-populate-initrd.sh

@@ -1,6 +1,5 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
 PLYMOUTH_LOGO_FILE="/usr/share/pixmaps/system-logo-white.png"
 PLYMOUTH_THEME=$(plymouth-set-default-theme)
 
@@ -27,7 +26,7 @@ if [[ $hostonly ]]; then
     if [ -L /usr/share/plymouth/themes/default.plymouth ]; then
         inst /usr/share/plymouth/themes/default.plymouth
         # Install plugin for this theme
-        PLYMOUTH_PLUGIN=$(grep "^ModuleName=" /usr/share/plymouth/themes/default.plymouth | while read a b c; do echo $b; done;)
+        PLYMOUTH_PLUGIN=$(grep "^ModuleName=" /usr/share/plymouth/themes/default.plymouth | while read a b c || [ -n "$b" ]; do echo $b; done;)
         inst_libdir_file "plymouth/${PLYMOUTH_PLUGIN}.so"
     fi
 else

modules.d/50plymouth/plymouth-pretrigger.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if type plymouthd >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
     if getargbool 1 plymouth.enable && getargbool 1 rd.plymouth -d -n rd_NO_PLYMOUTH; then

modules.d/80cms/cms-write-ifcfg.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
 
@@ -9,6 +7,7 @@ mkdir -m 0755 -p /run/initramfs/state/etc/sysconfig/network-scripts
 function cms_write_config()
 {
     . /tmp/cms.conf
+    SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')"
     OLDIFS=$IFS
     IFS=,
     read -a subch_array <<< "indexzero,$SUBCHANNELS"
@@ -26,7 +25,7 @@ function cms_write_config()
 
     IFCFGFILE=/run/initramfs/state/etc/sysconfig/network-scripts/ifcfg-$DEVICE
 
-    strstr "$IPADDR" '*:*:*' && ipv6=1
+    strglobin "$IPADDR" '*:*:*' && ipv6=1
 
 # to please NetworkManager on startup in loader before loader reconfigures net
     cat > /etc/sysconfig/network << EOF

modules.d/80cms/cmsifup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
 
@@ -8,7 +6,7 @@ DEVICE=$1
 
 . /tmp/cms.conf
 
-strstr "$IPADDR" '*:*:*' && ipv6=1
+strglobin "$IPADDR" '*:*:*' && ipv6=1
 
 if [ "$ipv6" ] && ! str_starts "$IPADDR" "["; then
     IPADDR="[$IPADDR]"
@@ -37,4 +35,4 @@ fi
 IFACES="$IFACES $DEVICE"
 echo "$IFACES" >> /tmp/net.ifaces
 
-ifup $DEVICE -m
+exec ifup "$DEVICE"