dracut: fixed module dependency handling

Fail for "--modules" and "--force-add" dracut modules, if they or their
dependencies cannot be included.

.dir-locals.el

@@ -0,0 +1,2 @@
+(setq sh-basic-offset: 4)
+(setq indent-tabs-mode nil)

.kateconfig

@@ -0,0 +1 @@
+kate: space-indent on; tab-width 4; indent-width 4; replace-tabs on; eol unix;

.kateproject

@@ -0,0 +1,9 @@
+{
+  "name": "Kate"
+  , "files": [ { "git": 1 } ]
+  , "build": {
+    "directory": "build"
+  , "build": "make -j $(getconf _NPROCESSORS_ONLN) all"
+  , "clean": "make clean"
+  }
+}

50-dracut.install

@@ -1,32 +1,44 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
-if [[ -f /etc/kernel/cmdline ]]; then
-    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
-fi
-
-if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-    readarray -t BOOT_OPTIONS < /proc/cmdline
-fi
-
-unset noimageifnotneeded
-
-for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
-    if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
-        noimageifnotneeded="yes"
-        break
-    fi
-done
+COMMAND="$1"
+KERNEL_VERSION="$2"
+BOOT_DIR_ABS="$3"
+KERNEL_IMAGE="$4"
 
 ret=0
-case "$1" in
+case "$COMMAND" in
     add)
-	dracut ${noimageifnotneeded:+--noimageifnotneeded} "$3"/initrd "$2"
+        INITRD_IMAGE_PREGENERATED=${KERNEL_IMAGE%/*}/initrd
+        if [[ -f ${INITRD_IMAGE_PREGENERATED} ]]; then
+            # we found an initrd at the same place as the kernel
+            # use this and don't generate a new one
+            cp "$INITRD_IMAGE_PREGENERATED" "$BOOT_DIR_ABS/initrd" \
+                && chown root:root "$BOOT_DIR_ABS/initrd" \
+                && chmod 0600 "$BOOT_DIR_ABS/initrd" \
+                && exit 0
+        fi
+
+        if [[ -f /etc/kernel/cmdline ]]; then
+            readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+        fi
+
+        if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
+            read -ar BOOT_OPTIONS < /proc/cmdline
+        fi
+
+        unset noimageifnotneeded
+
+        for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
+            if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
+                noimageifnotneeded="yes"
+                break
+            fi
+        done
+	dracut ${noimageifnotneeded:+--noimageifnotneeded} "$BOOT_DIR_ABS"/initrd "$KERNEL_VERSION"
         ret=$?
 	;;
     remove)
-        rm -f -- "$3"/initrd
+        rm -f -- "$BOOT_DIR_ABS"/initrd
         ret=$?
 	;;
 esac

51-dracut-rescue-postinst.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 export LANG=C
 

51-dracut-rescue.install

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 export LANG=C
 
@@ -45,7 +43,7 @@ if [[ -f /etc/kernel/cmdline ]]; then
     readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
 fi
 if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-    readarray -t BOOT_OPTIONS < /proc/cmdline
+    read -ar BOOT_OPTIONS < /proc/cmdline
 fi
 if ! [[ $BOOT_OPTIONS ]]; then
     exit 1
@@ -75,7 +73,7 @@ case "$COMMAND" in
             echo "Can't copy '$KERNEL_IMAGE to '$BOOT_DIR_ABS/linux'!" >&2
         fi
 
-        dracut --no-hostonly  -a "rescue" "$BOOT_DIR_ABS"/initrd "$2"
+        dracut --no-hostonly -a "rescue" "$BOOT_DIR_ABS"/initrd "$KERNEL_VERSION"
         ((ret+=$?))
 
         {

Makefile

@@ -13,7 +13,7 @@ sysconfdir ?= ${prefix}/etc
 bindir ?= ${prefix}/bin
 mandir ?= ${prefix}/share/man
 CFLAGS ?= -O2 -g -Wall
-CFLAGS += -std=gnu99  -D_FILE_OFFSET_BITS=64
+CFLAGS += -std=gnu99  -D_FILE_OFFSET_BITS=64 -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
 bashcompletiondir ?= ${datadir}/bash-completion/completions
 
 man1pages = lsinitrd.1
@@ -125,9 +125,9 @@ endif
 	if [ -n "$(systemdsystemunitdir)" ]; then \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
 		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
-		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants; \
+		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants; \
 		ln -s ../dracut-shutdown.service \
-		$(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants/dracut-shutdown.service; \
+		$(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants/dracut-shutdown.service; \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants; \
 		for i in \
 		    dracut-cmdline.service \
@@ -188,7 +188,9 @@ rpm: dracut-$(VERSION).tar.xz syncheck
 	rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
 	cp dracut-$(VERSION).tar.xz "$$rpmbuild"; \
 	LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
-	(cd "$$rpmbuild"; rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
+	(cd "$$rpmbuild"; \
+	wget https://www.gnu.org/licenses/lgpl-2.1.txt; \
+	rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
 	        --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
 		--define "_rpmdir $$PWD" -ba dracut.spec; ) && \
 	( mv "$$rpmbuild"/$$(arch)/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr -- "$$rpmbuild"; ls *.rpm )

NEWS

@@ -1,3 +1,29 @@
+dracut-039
+==========
+- DRACUT_PATH can now be used to specify the PATH used by dracut
+  to search for binaries instead of the default
+  /usr/sbin:/sbin:/usr/bin:/bin
+  This should be set in the distribution config file
+  /usr/lib/dracut/dracut.conf.d/01-dist.conf
+- add "--loginstall <DIR>" and loginstall="<DIR>" options
+  to record all files, which are installed from the host fs
+- "rd.writable.fsimg" - support for read/write filesystem images
+- "rd.route" kernel command line parameter added
+- "--install-optional" and install_optional_items added
+- find plymouth pkglibdir on debian
+- torrent support for live images
+  root=live:torrent://example.com/liveboot.img.torrent
+  and generally added as a download handler
+- disable microcode, if the kernel does not support it
+- speed up ldconfig_paths()
+- more ARM modules
+- fixed inst*() functions and "-H" handling
+- fixed bridge setup
+- added --force-drivers parameter and force_drivers=+ config option
+  to enforce driver loading at early boot time
+- documented "iso-scan/filename" usage in grub
+- various bugfixes
+
 dracut-038
 ==========
 - "rd.cmdline=ask" will ask the user on the console to enter additional

TODO

@@ -47,3 +47,6 @@ Future Enhancement Requests
 - run ssh server to enter crypto password or perform debugging (supported by debian)
 - https://bugzilla.redhat.com/show_bug.cgi?id=524727 - dracut + encrypted root + networking
 
+- lsinitrd --print-cmdline
+- dracut --print-cmdline error if additional arguments
+- library for cmdline

configure

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # We don't support srcdir != builddir
 echo \#buildapi-variable-no-builddir >/dev/null

dracut-bash-completion.sh

@@ -1,7 +1,4 @@
 #
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-#
 # Copyright 2013 Red Hat, Inc.  All rights reserved.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -34,13 +31,16 @@ _dracut() {
                               --local --hostonly --no-hostonly --fstab --help --bzip2 --lzma
                               --xz --no-compress --gzip --list-modules --show-modules --keep
                               --printsize --regenerate-all --noimageifnotneeded --early-microcode
-                              --no-early-microcode --print-cmdline --prelink --noprelink'
+                              --no-early-microcode --print-cmdline --prelink --noprelink --reproducible
+                              '
 
                        [ARG]='-a -m -o -d -I -k -c -L --kver --add --force-add --add-drivers
                               --omit-drivers --modules --omit --drivers --filesystems --install
                               --fwdir --libdirs --fscks --add-fstab --mount --device --nofscks
                               --kmoddir --conf --confdir --tmpdir --stdlog --compress --prefix
-                              --kernel-cmdline --sshkey --persistent-policy'
+                              --kernel-cmdline --sshkey --persistent-policy --install-optional
+                              --loginstall
+                              '
         )
 
         if __contains_word "$prev" ${OPTS[ARG]}; then
@@ -49,7 +49,7 @@ _dracut() {
                                 comps=$(compgen -d -- "$cur")
                                 compopt -o filenames
                         ;;
-                        -c|--conf|--sshkey|--add-fstab|--add-device|-I|--install)
+                        -c|--conf|--sshkey|--add-fstab|--add-device|-I|--install|--install-optional)
                                 comps=$(compgen -f -- "$cur")
                                 compopt -o filenames
                         ;;

dracut-catimages.sh

@@ -1,6 +1,4 @@
 #!/bin/bash --norc
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Copyright 2009 Red Hat, Inc.  All rights reserved.
 #

dracut-functions.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # functions used by dracut and other tools.
 #
@@ -109,12 +107,11 @@ ldconfig_paths()
     local a i
     declare -A a
     for i in $(
-        ldconfig -pN 2>/dev/null | while read a b c d; do
-            [[ "$c" != "=>" ]] && continue
-            printf "%s\n" ${d%/*};
+        ldconfig -pN 2>/dev/null | grep -F '=>' | grep -E -v '/(lib|lib64|usr/lib|usr/lib64)/[^/]*$' | while read a b c d; do
+            d=${d%/*}
+            printf "%s\n" "$d";
         done
     ); do
-        [[ "$i" = "/lib" || "$i" = "/usr/lib" || "$i" = "/lib64" || "$i" = "/usr/lib64" ]] && continue
         a["$i"]=1;
     done;
     printf "%s\n" ${!a[@]}
@@ -389,6 +386,7 @@ get_persistent_dev() {
             return
         fi
     done
+    printf -- "%s" "$1"
 }
 
 expand_persistent_dev() {
@@ -739,7 +737,6 @@ fs_get_option() {
     done
 }
 
-
 if ! [[ $DRACUT_INSTALL ]]; then
     DRACUT_INSTALL=$(find_binary dracut-install)
 fi
@@ -761,33 +758,46 @@ inst_dir() {
 }
 
 inst() {
+    local _hostonly_install
+    if [[ "$1" == "-H" ]]; then
+        _hostonly_install="-H"
+        shift
+    fi
     [[ -e ${initdir}/"${2:-$1}" ]] && return 0  # already there
-        #dinfo "$DRACUT_INSTALL -l $@"
-    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
 }
 
 inst_simple() {
+    local _hostonly_install
+    if [[ "$1" == "-H" ]]; then
+        _hostonly_install="-H"
+        shift
+    fi
     [[ -e ${initdir}/"${2:-$1}" ]] && return 0  # already there
     [[ -e $1 ]] || return 1  # no source
-    $DRACUT_INSTALL ${initdir:+-D "$initdir"} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@" || :
 }
 
 inst_symlink() {
+    local _hostonly_install
+    if [[ "$1" == "-H" ]]; then
+        _hostonly_install="-H"
+        shift
+    fi
     [[ -e ${initdir}/"${2:-$1}" ]] && return 0  # already there
     [[ -L $1 ]] || return 1
-    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
 }
 
 inst_multiple() {
-    local ret
-        #dinfo "initdir=$initdir $DRACUT_INSTALL -l $@"
-    $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@"
-    ret=$?
-    (($ret != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@" || :
-    return $ret
+    local _ret
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@"
+    _ret=$?
+    (($_ret != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
+    return $_ret
 }
 
 dracut_install() {
@@ -795,20 +805,25 @@ dracut_install() {
 }
 
 inst_library() {
+    local _hostonly_install
+    if [[ "$1" == "-H" ]]; then
+        _hostonly_install="-H"
+        shift
+    fi
     [[ -e ${initdir}/"${2:-$1}" ]] && return 0  # already there
     [[ -e $1 ]] || return 1  # no source
-    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
 }
 
 inst_binary() {
-    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@" || :
 }
 
 inst_script() {
-    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@"
-    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@" || :
+    $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@"
+    (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l}  ${DRACUT_FIPS_MODE:+-f} "$@" || :
 }
 
 mark_hostonly() {
@@ -1299,13 +1314,17 @@ check_mount() {
         fi
     fi
 
-
     for _moddep in $(module_depends $_mod); do
         # handle deps as if they were manually added
-        [[ " $add_dracutmodules " == *\ $_moddep\ * ]] || \
-            add_dracutmodules+=" $_moddep "
-        [[ " $force_add_dracutmodules " == *\ $_moddep\ * ]] || \
-            force_add_dracutmodules+=" $_moddep "
+        [[ " $dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $dracutmodules " != *\ $_moddep\ * ]] \
+            && dracutmodules+=" $_moddep "
+        [[ " $add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \
+            && add_dracutmodules+=" $_moddep "
+        [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \
+            && force_add_dracutmodules+=" $_moddep "
         # if a module we depend on fail, fail also
         if ! check_module $_moddep; then
             derror "dracut module '$_mod' depends on '$_moddep', which can't be installed"
@@ -1343,7 +1362,7 @@ check_module() {
     fi
 
     if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then
-        if [[ " $force_add_dracutmodules " == *\ $_mod\ * ]]; then
+        if [[ " $dracutmodules $force_add_dracutmodules " == *\ $_mod\ * ]]; then
             module_check $_mod 1; ret=$?
         else
             module_check $_mod 0; ret=$?
@@ -1354,7 +1373,11 @@ check_module() {
         # module not in our list
         if [[ $dracutmodules = all ]]; then
             # check, if we can and should install this module
-            module_check $_mod || return 1
+            module_check $_mod; ret=$?
+            if [[ $ret != 0 ]]; then
+                [[ $2 ]] && return 1
+                [[ $ret != 255 ]] && return 1
+            fi
         else
             # skip this module
             return 1
@@ -1363,10 +1386,15 @@ check_module() {
 
     for _moddep in $(module_depends $_mod); do
         # handle deps as if they were manually added
-        [[ " $add_dracutmodules " == *\ $_moddep\ * ]] || \
-            add_dracutmodules+=" $_moddep "
-        [[ " $force_add_dracutmodules " == *\ $_moddep\ * ]] || \
-            force_add_dracutmodules+=" $_moddep "
+        [[ " $dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $dracutmodules " != *\ $_moddep\ * ]] \
+            && dracutmodules+=" $_moddep "
+        [[ " $add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \
+            && add_dracutmodules+=" $_moddep "
+        [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \
+            && force_add_dracutmodules+=" $_moddep "
         # if a module we depend on fail, fail also
         if ! check_module $_moddep; then
             derror "dracut module '$_mod' depends on '$_moddep', which can't be installed"
@@ -1398,11 +1426,19 @@ for_each_module_dir() {
 
     # Report any missing dracut modules, the user has specified
     _modcheck="$add_dracutmodules $force_add_dracutmodules"
-    [[ $dracutmodules != all ]] && _modcheck="$m $dracutmodules"
+    [[ $dracutmodules != all ]] && _modcheck="$_modcheck $dracutmodules"
     for _mod in $_modcheck; do
         [[ " $mods_to_load " == *\ $_mod\ * ]] && continue
-        [[ " $omit_dracutmodules " == *\ $_mod\ * ]] && continue
+
+        [[ " $force_add_dracutmodules " != *\ $_mod\ * ]] \
+            && [[ " $dracutmodules " != *\ $_mod\ * ]] \
+            && [[ " $omit_dracutmodules " == *\ $_mod\ * ]] \
+            && continue
+
         derror "dracut module '$_mod' cannot be found or installed."
+        [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] && exit 1
+        [[ " $dracutmodules " == *\ $_mod\ * ]] && exit 1
+        [[ " $add_dracutmodules " == *\ $_mod\ * ]] && exit 1
     done
 }
 
@@ -1505,7 +1541,7 @@ dracut_kernel_post() {
 
         (
             if [[ $DRACUT_INSTALL ]] && [[ -z $_moddirname ]]; then
-                xargs -r $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"
+                xargs -r $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} -a < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"
             else
                 while read _modpath; do
                     local _destpath=$_modpath
@@ -1524,7 +1560,7 @@ dracut_kernel_post() {
                 for _fwdir in $fw_dir; do
                     echo $_fwdir/$line;
                 done;
-            done | xargs -r $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a -o
+            done | xargs -r $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} -a -o
         else
             for _fw in $(xargs -r modinfo -k $kernel -F firmware < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"); do
                 for _fwdir in $fw_dir; do
@@ -1722,6 +1758,24 @@ instmods() {
     _ret=$?
     return $_ret
 }
+
+check_kernel_config()
+{
+    local _config_opt="$1"
+    local _config_file
+    [[ -f /boot/config-$kernel ]] \
+        && _config_file="/boot/config-$kernel"
+    [[ -f /lib/modules/$kernel/config ]] \
+        && _config_file="/lib/modules/$kernel/config"
+
+    # no kernel config file, so return true
+    [[ $_config_file ]] || return 0
+
+    grep -q -F "${_config_opt}=" "$_config_file" && return 0
+    return 1
+}
+
+
 # get_cpu_vendor
 # Only two values are returned: AMD or Intel
 get_cpu_vendor ()

dracut-initramfs-restore.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 set -e
 

dracut-logger.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 et filetype=sh
 #
 # logging faciality module for dracut both at build- and boot-time
 #

dracut.8.asc

@@ -136,6 +136,19 @@ example:
 ----
 ===============================
 
+**--force-drivers** _<list of kernel modules>_::
+    See add-drivers above. But in this case it is ensured that the drivers
+    are tried to be loaded early via modprobe.
++
+[NOTE]
+===============================
+If [LIST] has multiple arguments, then you have to put these in quotes. For
+example:
+----
+# dracut --force-drivers "kmodule1 kmodule2"  ...
+----
+===============================
+
 **--omit-drivers** _<list of kernel modules>_::
     specify a space-separated list of kernel modules not to add to the
     initramfs.
@@ -349,6 +362,9 @@ example:
 ----
 ===============================
 
+**--install-optional** _<file list>_::
+    install the space separated list of files into the initramfs, if they exist.
+
 **--gzip**::
     Compress the generated initramfs using gzip. This will be done by default,
     unless another compression option or --no-compress is passed. Equivalent to
@@ -409,6 +425,9 @@ will not be able to boot.
     Do not compress the generated initramfs. This will override any other
     compression options.
 
+**--reproducible**::
+    Create reproducible images.
+
 **--list-modules**::
     List all available dracut modules.
 
@@ -443,6 +462,9 @@ will not be able to boot.
     Regenerate all initramfs images at the default location with the kernel
     versions found on the system. Additional parameters are passed through.
 
+**--loginstall _<DIR>_::
+    Log all files installed from the host to _<DIR>_.
+
 FILES
 -----
 _/var/log/dracut.log_::

dracut.cmdline.7.asc

@@ -109,6 +109,23 @@ resume=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
     the init system performs fsck before remount, you might want to use this
     option to avoid duplication.
 
+iso-scan/filename
+~~~~~~~~~~~~~~~~~
+
+Using iso-scan/filename with a Fedora/Red Hat/CentOS Live iso should just work
+by copying the original kernel cmdline parameters.
+
+[listing]
+.Example
+--
+menuentry 'Live Fedora 20' --class fedora --class gnu-linux --class gnu --class os {
+    set isolabel=Fedora-Live-LXDE-x86_64-20-1
+    set isofile="/boot/iso/Fedora-Live-LXDE-x86_64-20-1.iso"
+    loopback loop $isofile
+    linux (loop)/isolinux/vmlinuz0 boot=isolinux iso-scan/filename=$isofile root=live:LABEL=$isolabel ro rd.live.image quiet rhgb
+    initrd (loop)/isolinux/initrd0.img
+}
+--
 
 Misc
 ~~~~
@@ -493,6 +510,19 @@ WARNING: Do **not** use the default kernel naming scheme for the interface name,
 as it can conflict with the kernel names. So, don't use "eth[0-9]+" for the
 interface name. Better name it "bootnet" or "bluesocket".
 
+**rd.route=**__<net>__/__<netmask>__:__<gateway>__[:__<interface>__]::
+    Add a static route with route options, which are separated by a colon.
+    IPv6 addresses have to be put in brackets.
++
+[listing]
+.Example
+--
+    rd.route=192.168.200.0/24:192.168.100.222:ens10
+    rd.route=192.168.200.0/24:192.168.100.222
+    rd.route=192.168.200.0/24::ens10
+    rd.route=[2001:DB8:3::/8]:[2001:DB8:2::1]:ens10
+--
+
 **bootdev=**__<interface>__::
     specify network interface to use routing and netroot information from.
     Required if multiple ip= lines are used.
@@ -540,7 +570,7 @@ NFS
 ~~~
 **root=**\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__]::
     mount nfs share from <server-ip>:/<root-dir>, if no server-ip is given, use
-    dhcp next_server. if server-ip is an IPv6 address it has to be put in
+    dhcp next_server. If server-ip is an IPv6 address it has to be put in
     brackets, e.g. [2001:DB8::1]. NFS options can be appended with the prefix
     ":" or "," and are seperated by ",".
 
@@ -720,10 +750,91 @@ rd.znet=qeth,0.0.0600,0.0.0601,0.0.0602,layer2=1,portname=foo
 rd.znet=ctc,0.0.0600,0.0.0601,protocol=bar
 --
 
+Booting live images
+~~~~~~~~~~~~~~~~~~~
+Dracut offers multiple options for live booted images:
+
+=====================
+squashfs with read-only filesystem image::: The system will boot with a read
+only filesystem from the squashfs and apply a writable device mapper snapshot
+over the read only filesystem.  Using this method ensures a relatively fast
+boot and lower RAM usage. Users **must be careful** to avoid writing too many
+blocks to the snapshot volume.  Once the blocks of the snapshot are exhaused,
+the live filesystem becomes unusable and requires a reboot.
++
+The filesystem structure is expected to be:
++
+[listing]
+--
+squashfs.img          |  Squashfs downloaded via network
+   !(mount)
+   /LiveOS
+       |- ext3fs.img  |  Filesystem image to mount read-only
+            !(mount)
+            /bin      |  Live filesystem
+            /boot     |
+            /dev      |
+            ...       |
+--
++
+Dracut uses this method of live booting by default.  No additional command line
+options are required other than **root=live:<URL>** to specify the location
+of your squashed filesystem.
++
+writable filesystem image::: The system will retrieve a compressed filesystem
+image, connect it to a loopback device, and mount it as a writable volume.  More
+RAM is required during boot but the live filesystem is easier to manage if it
+becomes full.  Users can make a filesystem image of any size and that size will
+be maintained when the system boots.
++
+The filesystem structure is expected to be:
++
+[listing]
+--
+rootfs.tgz            |  Compressed tarball containing fileystem image
+   !(unpack)
+   /rootfs.img        |  Filesystem image
+      !(mount)
+      /bin            |  Live filesystem
+      /boot           |
+      /dev            |
+      ...             |
+--
++
+To use this boot option, ensure that **rd.writable_fsimg=1** is in your kernel
+command line and add the **root=live:<URL>** to specify the location
+of your compressed filesystem image tarball.
+=====================
+
+**root=**live:__<url>__::
+Boots a live image retrieved from __<url>__.  Valid handlers: __http, https, ftp, torrent, tftp__.
++
+[listing]
+.Example
+--
+root=live:http://example.com/liveboot.img
+root=live:ftp://ftp.example.com/liveboot.img
+root=live:torrent://example.com/liveboot.img.torrent
+--
+
+**rd.live.debug=**1::
+Enables debug output from the live boot process.
+
+**rd.live.dir=**__<path>__::
+Specifies the directory within the squashfs where the ext3fs.img or rootfs.img
+can be found.  By default, this is __LiveOS__.
+
+**rd.writable.fsimg=**1::
+Enables writable filesystem support.  The system will boot with a fully 
+writable filesystem without snapshots __(see notes above about available live boot options)__.
+You can use the **rootflags** option to set mount options for the live
+filesystem as well __(see documentation about rootflags in the **Standard** section above)__.
+
+
 Plymouth Boot Splash
 ~~~~~~~~~~~~~~~~~~~~
 **plymouth.enable=0**::
-    disable the plymouth bootsplash completly.
+    disable the plymouth bootsplash completely.
 
 **rd.plymouth=0**::
     disable the plymouth bootsplash only for the initramfs.

dracut.conf.5.asc

@@ -49,6 +49,10 @@ Configuration files must have the extension .conf; other extensions are ignored.
     Specify a space-separated list of kernel modules to add to the initramfs.
     The kernel modules have to be specified without the ".ko" suffix.
 
+*force_drivers+=*" __<list of kernel modules>__ "::
+    See add_drivers above. But in this case it is ensured that the drivers
+    are tried to be loaded early via modprobe.
+
 *omit_drivers+=*" __<kernel modules>__ "::
     Specify a space-separated list of kernel modules not to add to the
     initramfs. The kernel modules have to be specified without the ".ko" suffix.
@@ -66,6 +70,10 @@ Configuration files must have the extension .conf; other extensions are ignored.
 *install_items+=*" __<file>__[ __<file>__ ...] "::
     Specify additional files to include in the initramfs, separated by spaces.
 
+*install_optional_items+=*" __<file>__[ __<file>__ ...] "::
+    Specify additional files to include in the initramfs, separated by spaces,
+    if they exist.
+
 *do_strip=*"__{yes|no}__"::
     Strip binaries in the initramfs (default=yes)
 
@@ -175,6 +183,12 @@ provide a valid _/etc/fstab_.
 *i18n_install_all=*"__{yes|no}__"::
     Install everything regardless of generic or hostonly mode.
 
+*reproducible=*"__{yes|no}__"::
+    Create reproducible images.
+
+*loginstall=*"__<DIR>__"::
+    Log all files installed from the host to _<DIR>_.
+
 Files
 -----
 _/etc/dracut.conf_::

dracut.conf.d/fedora.conf.example

@@ -6,7 +6,7 @@ i18n_default_font="latarcyrheb-sun16"
 i18n_install_all="yes"
 stdloglvl=3
 sysloglvl=5
-install_items+=" vi /etc/virc ps grep cat rm "
+install_optional_items+=" vi /etc/virc ps grep cat rm "
 prefix="/"
 systemdutildir=/usr/lib/systemd
 systemdsystemunitdir=/usr/lib/systemd/system

dracut.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Generator script for a dracut initramfs
 # Tries to retain some degree of compatibility with the command line
@@ -81,6 +79,10 @@ Creates initial ramdisk images for preloading modules
                          exclusively include in the initramfs.
   --add-drivers [LIST]  Specify a space-separated list of kernel
                          modules to add to the initramfs.
+  --force-drivers [LIST] Specify a space-separated list of kernel
+                         modules to add to the initramfs and make sure they
+                         are tried to be loaded via modprobe same as passing
+                         rd.driver.pre=DRIVER kernel parameter.
   --omit-drivers [LIST] Specify a space-separated list of kernel
                          modules not to add to the initramfs.
   --filesystems [LIST]  Specify a space-separated list of kernel filesystem
@@ -158,6 +160,8 @@ Creates initial ramdisk images for preloading modules
                          in the final initramfs.
   -I, --install [LIST]  Install the space separated list of files into the
                          initramfs.
+  --install-optional [LIST]  Install the space separated list of files into the
+                         initramfs, if they exist.
   --gzip                Compress the generated initramfs using gzip.
                          This will be done by default, unless another
                          compression option or --no-compress is passed.
@@ -170,10 +174,10 @@ Creates initial ramdisk images for preloading modules
   --xz                  Compress the generated initramfs using xz.
                          Make sure that your kernel has xz support compiled
                          in, otherwise you will not be able to boot.
-  --lzo                  Compress the generated initramfs using lzop.
+  --lzo                 Compress the generated initramfs using lzop.
                          Make sure that your kernel has lzo support compiled
                          in, otherwise you will not be able to boot.
-  --lz4                  Compress the generated initramfs using lz4.
+  --lz4                 Compress the generated initramfs using lz4.
                          Make sure that your kernel has lz4 support compiled
                          in, otherwise you will not be able to boot.
   --compress [COMPRESSION] Compress the generated initramfs with the
@@ -189,6 +193,8 @@ Creates initial ramdisk images for preloading modules
   --printsize           Print out the module install size
   --sshkey [SSHKEY]     Add ssh key to initramfs (use with ssh-client module)
   --logfile [FILE]      Logfile to use (overrides configuration setting)
+  --reproducible        Create reproducible images
+  --loginstall [DIR]    Log all files installed from the host to [DIR]
 
 If [LIST] has multiple arguments, then you have to put these in quotes.
 
@@ -299,12 +305,14 @@ rearrange_params()
         --long add: \
         --long force-add: \
         --long add-drivers: \
+        --long force-drivers: \
         --long omit-drivers: \
         --long modules: \
         --long omit: \
         --long drivers: \
         --long filesystems: \
         --long install: \
+        --long install-optional: \
         --long fwdir: \
         --long libdirs: \
         --long fscks: \
@@ -369,6 +377,8 @@ rearrange_params()
         --long noimageifnotneeded \
         --long early-microcode \
         --long no-early-microcode \
+        --long reproducible \
+        --long loginstall: \
         -- "$@")
 
     if (( $? != 0 )); then
@@ -463,12 +473,16 @@ while :; do
         -a|--add)      push add_dracutmodules_l  "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         --force-add)   push force_add_dracutmodules_l  "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         --add-drivers) push add_drivers_l        "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --force-drivers) push force_drivers_l    "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         --omit-drivers) push omit_drivers_l      "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         -m|--modules)  push dracutmodules_l      "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         -o|--omit)     push omit_dracutmodules_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         -d|--drivers)  push drivers_l            "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         --filesystems) push filesystems_l        "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         -I|--install)  push install_items_l      "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
+        --install-optional)
+                       push install_optional_items_l \
+                                                 "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         --fwdir)       push fw_dir_l             "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         --libdirs)     push libdirs_l            "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
         --fscks)       push fscks_l              "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
@@ -486,6 +500,7 @@ while :; do
         -L|--stdlog)   stdloglvl_l="$2";               PARMS_TO_STORE+=" '$2'"; shift;;
         --compress)    compress_l="$2";                PARMS_TO_STORE+=" '$2'"; shift;;
         --prefix)      prefix_l="$2";                  PARMS_TO_STORE+=" '$2'"; shift;;
+        --loginstall)  loginstall_l="$2";              PARMS_TO_STORE+=" '$2'"; shift;;
         --rebuild)     if [ $rebuild_file == $outfile ]; then
                            force=yes
                        fi
@@ -551,7 +566,7 @@ while :; do
         --printsize)   printsize="yes";;
         --regenerate-all) regenerate_all="yes";;
         --noimageifnotneeded) noimageifnotneeded="yes";;
-
+        --reproducible) reproducible_l="yes";;
         --) shift; break;;
 
         *)  # should not even reach this point
@@ -620,21 +635,10 @@ if ! [[ $outfile ]]; then
     fi
 fi
 
-for i in /usr/sbin /sbin /usr/bin /bin; do
-    rl=$i
-    if [ -L "$i" ]; then
-        rl=$(readlink -f $i)
-    fi
-    if [[ "$NPATH" != *:$rl* ]] ; then
-        NPATH+=":$rl"
-    fi
-done
-export PATH="${NPATH#:}"
 unset LC_MESSAGES
 unset LC_CTYPE
 export LC_ALL=C
 export LANG=C
-unset NPATH
 unset LD_LIBRARY_PATH
 unset LD_PRELOAD
 unset GREP_OPTIONS
@@ -679,6 +683,20 @@ for f in $(dropindirs_sort ".conf" "$confdir" "$dracutbasedir/dracut.conf.d"); d
     [[ -e $f ]] && . "$f"
 done
 
+DRACUT_PATH=${DRACUT_PATH:-/sbin /bin /usr/sbin /usr/bin}
+
+for i in $DRACUT_PATH; do
+    rl=$i
+    if [ -L "$i" ]; then
+        rl=$(readlink -f $i)
+    fi
+    if [[ "$NPATH" != *:$rl* ]] ; then
+        NPATH+=":$rl"
+    fi
+done
+export PATH="${NPATH#:}"
+unset NPATH
+
 # these optins add to the stuff in the config file
 if (( ${#add_dracutmodules_l[@]} )); then
     while pop add_dracutmodules_l val; do
@@ -716,6 +734,12 @@ if (( ${#install_items_l[@]} )); then
     done
 fi
 
+if (( ${#install_optional_items_l[@]} )); then
+    while pop install_optional_items_l val; do
+        install_optional_items+=" $val "
+    done
+fi
+
 # these options override the stuff in the config file
 if (( ${#dracutmodules_l[@]} )); then
     dracutmodules=''
@@ -786,6 +810,9 @@ stdloglvl=$((stdloglvl + verbosity_mod_l))
 [[ $early_microcode_l ]] && early_microcode=$early_microcode_l
 [[ $early_microcode ]] || early_microcode=no
 [[ $logfile_l ]] && logfile="$logfile_l"
+[[ $reproducible_l ]] && reproducible="$reproducible_l"
+[[ $loginstall_l ]] && loginstall="$loginstall_l"
+
 # eliminate IFS hackery when messing with fw_dir
 fw_dir=${fw_dir//:/ }
 
@@ -795,7 +822,7 @@ case $compress in
     bzip2) compress="bzip2 -9";;
     lzma)  compress="lzma -9 -T0";;
     xz)    compress="xz --check=crc32 --lzma2=dict=1MiB -T0";;
-    gzip)  compress="gzip -9"; command -v pigz > /dev/null 2>&1 && compress="pigz -9";;
+    gzip)  compress="gzip -n -9 --rsyncable"; command -v pigz > /dev/null 2>&1 && compress="pigz -9 -n -T -R";;
     lzo)   compress="lzop -9";;
     lz4)   compress="lz4 -l -9";;
 esac
@@ -806,6 +833,8 @@ fi
 [[ $hostonly = yes ]] && hostonly="-h"
 [[ $hostonly != "-h" ]] && unset hostonly
 
+[[ $reproducible == yes ]] && DRACUT_REPRODUCIBLE=1
+
 readonly TMPDIR="$tmpdir"
 readonly initdir="$(mktemp --tmpdir="$TMPDIR/" -d -t initramfs.XXXXXX)"
 [ -d "$initdir" ] || {
@@ -842,6 +871,10 @@ if [[ $print_cmdline ]]; then
     kmsgloglvl=0
 fi
 
+if [[ -f $dracutbasedir/dracut-version.sh ]]; then
+    . $dracutbasedir/dracut-version.sh
+fi
+
 if [[ -f $dracutbasedir/dracut-functions.sh ]]; then
     . $dracutbasedir/dracut-functions.sh
 else
@@ -860,10 +893,6 @@ if ! [[ $print_cmdline ]]; then
     rm -fr -- ${initdir}/*
 fi
 
-if [[ -f $dracutbasedir/dracut-version.sh ]]; then
-    . $dracutbasedir/dracut-version.sh
-fi
-
 # Verify bash version, current minimum is 3.1
 if (( BASH_VERSINFO[0] < 4 )); then
     dfatal 'You need at least Bash 4 to use dracut, sorry.'
@@ -888,6 +917,13 @@ if (( ${#add_drivers_l[@]} )); then
 fi
 add_drivers=${add_drivers/-/_}
 
+if (( ${#force_drivers_l[@]} )); then
+    while pop force_drivers_l val; do
+        force_drivers+=" $val "
+    done
+fi
+force_drivers=${force_drivers/-/_}
+
 if (( ${#omit_drivers_l[@]} )); then
     while pop omit_drivers_l val; do
         omit_drivers+=" $val "
@@ -904,6 +940,7 @@ fi
 omit_drivers_corrected=""
 for d in $omit_drivers; do
     [[ " $drivers $add_drivers " == *\ $d\ * ]] && continue
+    [[ " $drivers $force_drivers " == *\ $d\ * ]] && continue
     omit_drivers_corrected+="$d|"
 done
 omit_drivers="${omit_drivers_corrected%|}"
@@ -960,6 +997,36 @@ if [[ ! $print_cmdline ]]; then
         dfatal "No permission to write $outfile."
         exit 1
     fi
+
+    if [[ $loginstall ]]; then
+        if ! mkdir -p "$loginstall"; then
+            dfatal "Could not create directory to log installed files to '$loginstall'."
+            exit 1
+        fi
+        loginstall=$(readlink -f "$loginstall")
+    fi
+fi
+
+if [[ $acpi_override = yes ]] && ! check_kernel_config CONFIG_ACPI_INITRD_TABLE_OVERRIDE; then
+    dwarn "Disabling ACPI override, because kernel does not support it. CONFIG_ACPI_INITRD_TABLE_OVERRIDE!=y"
+    unset acpi_override
+fi
+
+if [[ $early_microcode = yes ]]; then
+    if [[ $hostonly ]]; then
+        [[ $(get_cpu_vendor) == "AMD" ]] \
+            && ! check_kernel_config CONFIG_MICROCODE_AMD_EARLY \
+            && unset early_microcode
+        [[ $(get_cpu_vendor) == "Intel" ]] \
+            && ! check_kernel_config CONFIG_MICROCODE_INTEL_EARLY \
+            && unset early_microcode
+    else
+        ! check_kernel_config CONFIG_MICROCODE_AMD_EARLY \
+            && ! check_kernel_config CONFIG_MICROCODE_INTEL_EARLY \
+            && unset early_microcode
+    fi
+    [[ $early_microcode != yes ]] \
+        && dwarn "Disabling early microcode, because kernel does not support it. CONFIG_MICROCODE_[AMD|INTEL]_EARLY!=y"
 fi
 
 # Need to be able to have non-root users read stuff (rpcbind etc)
@@ -1153,7 +1220,9 @@ fi
 
 [[ -d "$systemdsystemconfdir" ]] || systemdsystemconfdir=/etc/systemd/system
 
-export initdir dracutbasedir dracutmodules \
+export initdir dracutbasedir \
+    dracutmodules force_add_dracutmodules add_dracutmodules omit_dracutmodules \
+    mods_to_load \
     fw_dir drivers_dir debug no_kernel kernel_only \
     omit_drivers mdadmconf lvmconf root_dev \
     use_fstab fstab_lines libdirs fscks nofscks ro_mnt \
@@ -1161,7 +1230,7 @@ export initdir dracutbasedir dracutmodules \
     debug host_fs_types host_devs sshkey add_fstab \
     DRACUT_VERSION udevdir prefix filesystems drivers \
     systemdutildir systemdsystemunitdir systemdsystemconfdir \
-    host_modalias host_modules hostonly_cmdline
+    host_modalias host_modules hostonly_cmdline loginstall
 
 mods_to_load=""
 # check all our modules to see if they should be sourced.
@@ -1296,6 +1365,13 @@ if [[ $no_kernel != yes ]]; then
     if [[ $add_drivers ]]; then
         hostonly='' instmods -c $add_drivers
     fi
+    if [[ $force_drivers ]]; then
+        hostonly='' instmods -c $force_drivers
+        rm -f $initdir/etc/cmdline.d/20-force_driver.conf
+        for mod in $force_drivers; do
+            echo "rd.driver.pre=$mod" >>$initdir/etc/cmdline.d/20-force_drivers.conf
+        done
+    fi
     if [[ $filesystems ]]; then
         hostonly='' instmods -c $filesystems
     fi
@@ -1317,6 +1393,7 @@ fi
 
 if [[ $kernel_only != yes ]]; then
     (( ${#install_items[@]} > 0 )) && inst_multiple ${install_items[@]}
+    (( ${#install_optional_items[@]} > 0 )) && inst_multiple -o ${install_optional_items[@]}
 
     [[ $kernel_cmdline ]] && printf "%s\n" "$kernel_cmdline" >> "${initdir}/etc/cmdline.d/01-default.conf"
 
@@ -1400,20 +1477,18 @@ if [[ $kernel_only != yes ]]; then
     fi
 fi
 
-if [[ $do_prelink == yes ]]; then
-    PRELINK_BIN="$(command -v prelink)"
-    if [[ $UID = 0 ]] && [[ $PRELINK_BIN ]]; then
-        if [[ $DRACUT_FIPS_MODE ]]; then
-            dinfo "*** Installing prelink files ***"
-            inst_multiple -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf /etc/prelink.cache
-        else
-            dinfo "*** Pre-linking files ***"
-            inst_multiple -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf
-            chroot "$initdir" "$PRELINK_BIN" -a
-            rm -f -- "$initdir/$PRELINK_BIN"
-            rm -fr -- "$initdir"/etc/prelink.*
-            dinfo "*** Pre-linking files done ***"
-        fi
+PRELINK_BIN="$(command -v prelink)"
+if [[ $UID = 0 ]] && [[ $PRELINK_BIN ]]; then
+    if [[ $DRACUT_FIPS_MODE ]]; then
+        dinfo "*** Installing prelink files ***"
+        inst_multiple -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf /etc/prelink.cache
+    elif [[ $do_prelink == yes ]]; then
+        dinfo "*** Pre-linking files ***"
+        inst_multiple -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf
+        chroot "$initdir" "$PRELINK_BIN" -a
+        rm -f -- "$initdir/$PRELINK_BIN"
+        rm -fr -- "$initdir"/etc/prelink.*
+        dinfo "*** Pre-linking files done ***"
     fi
 fi
 
@@ -1484,7 +1559,7 @@ if [[ $acpi_override = yes ]] && [[ -d $acpi_table_dir ]]; then
     mkdir -p $_dest_dir
     for table in $acpi_table_dir/*.aml; do
         dinfo "   Adding ACPI table: $table"
-        cp $table $_dest_dir
+        cp -a $table $_dest_dir
         create_early_cpio="yes"
     done
 fi
@@ -1498,15 +1573,37 @@ fi
 rm -f -- "$outfile"
 dinfo "*** Creating image file ***"
 
+if [[ $DRACUT_REPRODUCIBLE ]]; then
+    find "$initdir" -newer "$dracutbasedir/dracut-functions.sh" -print0 \
+        | xargs -r -0 touch -h -m -c -r "$dracutbasedir/dracut-functions.sh"
+
+    [[ "$(cpio --help)" == *--reproducible* ]] && CPIO_REPRODUCIBLE=1
+fi
+
 [[ "$UID" != 0 ]] && cpio_owner_root="-R 0:0"
 
 if [[ $create_early_cpio = yes ]]; then
     echo 1 > "$early_cpio_dir/d/early_cpio"
+
+    if [[ $DRACUT_REPRODUCIBLE ]]; then
+        find "$early_cpio_dir/d" -newer "$dracutbasedir/dracut-functions.sh" -print0 \
+            | xargs -r -0 touch -h -m -c -r "$dracutbasedir/dracut-functions.sh"
+    fi
+
     # The microcode blob is _before_ the initramfs blob, not after
-    (cd "$early_cpio_dir/d";     find . -print0 | cpio --null $cpio_owner_root -H newc -o --quiet > $outfile)
+    (
+        cd "$early_cpio_dir/d"
+        find . -print0 | sort -z \
+            | cpio ${CPIO_REPRODUCIBLE:+--reproducible} --null $cpio_owner_root -H newc -o --quiet > $outfile
+    )
 fi
-if ! ( umask 077; cd "$initdir"; find . -print0 | cpio --null $cpio_owner_root -H newc -o --quiet | \
-    $compress >> "$outfile"; ); then
+
+if ! (
+        umask 077; cd "$initdir"
+        find . -print0 | sort -z \
+            | cpio ${CPIO_REPRODUCIBLE:+--reproducible} --null $cpio_owner_root -H newc -o --quiet \
+            | $compress >> "$outfile"
+    ); then
     dfatal "dracut: creation of $outfile failed"
     exit 1
 fi

dracut.spec

@@ -30,6 +30,8 @@ URL: https://dracut.wiki.kernel.org/
 # Source can be generated by
 # http://git.kernel.org/?p=boot/dracut/dracut.git;a=snapshot;h=%{version};sf=tgz
 Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.xz
+Source1: https://www.gnu.org/licenses/lgpl-2.1.txt
+
 
 BuildRequires: bash git
 
@@ -194,6 +196,7 @@ This package contains tools to assemble the local initrd and host configuration.
 
 %prep
 %setup -q -n %{name}-%{version}
+cp %{SOURCE1} .
 
 %if %{defined PATCH1}
 git init
@@ -293,8 +296,10 @@ rm -rf -- $RPM_BUILD_ROOT
 %files
 %defattr(-,root,root,0755)
 %if %{with doc}
-%doc README HACKING TODO COPYING AUTHORS NEWS dracut.html dracut.png dracut.svg
+%doc README HACKING TODO AUTHORS NEWS dracut.html dracut.png dracut.svg
 %endif
+%{!?_licensedir:%global license %%doc}
+%license COPYING lgpl-2.1.txt
 %{_bindir}/dracut
 # compat symlink
 %{_sbindir}/dracut
@@ -394,7 +399,7 @@ rm -rf -- $RPM_BUILD_ROOT
 %dir %{_sharedstatedir}/initramfs
 %if %{defined _unitdir}
 %{_unitdir}/dracut-shutdown.service
-%{_unitdir}/shutdown.target.wants/dracut-shutdown.service
+%{_unitdir}/sysinit.target.wants/dracut-shutdown.service
 %{_unitdir}/dracut-cmdline.service
 %{_unitdir}/dracut-initqueue.service
 %{_unitdir}/dracut-mount.service
@@ -441,11 +446,6 @@ rm -rf -- $RPM_BUILD_ROOT
 
 %files fips-aesni
 %defattr(-,root,root,0755)
-
-%if %{with doc}
-%doc COPYING
-%endif
-
 %{dracutlibdir}/modules.d/02fips-aesni
 
 %files caps

dracut.usage.asc

@@ -209,7 +209,7 @@ be specified once.
 ----
 # mkdir -p rd.live.overlay/etc/cmdline.d
 # mkdir -p rd.live.overlay/etc/conf.d
-# echo "ip=auto" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
+# echo "ip=dhcp" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
 # echo export FOO=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
 # echo export BAR=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
 # tree rd.live.overlay/
@@ -259,9 +259,11 @@ local hard drive or it can be served by a PXE/TFTP server.
 
 How to setup your PXE/TFTP server can be found in the
 http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
-Hat Enterprise Linux Storage Administration Guide].
+Hat Enterprise Linux 6 Storage Administration Guide]
+or http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
+Hat Enterprise Linux 7 Storage Administration Guide].
 
-If you specify ip=auto on the kernel command line, then dracut asks a dhcp
+If you specify ip=dhcp on the kernel command line, then dracut asks a dhcp
 server about the ip adress for the machine. The dhcp server can also serve an
 additional root-path, which will set the root device for dracut. With this
 mechanism, you have static configuration on your client machine and a
@@ -528,7 +530,7 @@ on _pre-shutdown_ or _shutdown_.
 To do this from an already booted system:
 ----
 # mkdir -p /run/initramfs/etc/cmdline.d
-# echo "rd.break=pre-shutdown" > /run/initramfs/etc/cmdline.d/debug.conf
+# echo "rd.debug rd.break=pre-shutdown rd.break=shutdown" > /run/initramfs/etc/cmdline.d/debug.conf
 # touch /run/initramfs/.need_shutdown
 ----
 

install/.kateconfig

@@ -0,0 +1 @@
+kate: space-indent on; tab-width 8; indent-width 8; replace-tabs on; eol unix;

install/dracut-install.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /* dracut-install.c  -- install files and executables
 
    Copyright (C) 2012 Harald Hoyer
@@ -55,7 +53,9 @@ static bool arg_resolvelazy = false;
 static bool arg_resolvedeps = false;
 static bool arg_hostonly = false;
 static char *destrootdir = NULL;
-
+static char *logdir = NULL;
+static char *logfile = NULL;
+FILE *logfile_f = NULL;
 static Hashmap *items = NULL;
 static Hashmap *items_failed = NULL;
 
@@ -222,7 +222,8 @@ static int cp(const char *src, const char *dst)
                 if (ret == 0) {
                         struct timeval tv[2];
                         if (fchown(dest_desc, sb.st_uid, sb.st_gid) != 0)
-                                fchown(dest_desc, (__uid_t) - 1, sb.st_gid);
+                                if(fchown(dest_desc, (__uid_t) - 1, sb.st_gid) != 0)
+                                    log_error("Failed to chown %s: %m", dst);
                         tv[0].tv_sec = sb.st_atime;
                         tv[0].tv_usec = 0;
                         tv[1].tv_sec = sb.st_mtime;
@@ -328,18 +329,25 @@ static int resolve_deps(const char *src)
 {
         int ret = 0;
 
-        _cleanup_free_ char *buf = malloc(LINE_MAX);
+        _cleanup_free_ char *buf = NULL;
         size_t linesize = LINE_MAX;
         _cleanup_pclose_ FILE *fptr = NULL;
         _cleanup_free_ char *cmd = NULL;
 
+	buf = malloc(LINE_MAX);
+	if (buf == NULL)
+		return -errno;
+
         if (strstr(src, ".so") == 0) {
                 _cleanup_close_ int fd = -1;
                 fd = open(src, O_RDONLY | O_CLOEXEC);
                 if (fd < 0)
                         return -errno;
 
-                read(fd, buf, LINE_MAX);
+                ret = read(fd, buf, LINE_MAX);
+                if (ret == -1)
+                        return -errno;
+
                 buf[LINE_MAX - 1] = '\0';
                 if (buf[0] == '#' && buf[1] == '!') {
                         /* we have a shebang */
@@ -367,7 +375,7 @@ static int resolve_deps(const char *src)
         fptr = popen(cmd, "r");
 
         while (!feof(fptr)) {
-                char *p, *q;
+                char *p;
 
                 if (getline(&buf, &linesize, fptr) <= 0)
                         continue;
@@ -401,6 +409,8 @@ static int resolve_deps(const char *src)
 
                 p = strchr(p, '/');
                 if (p) {
+                        char *q;
+
                         for (q = p; *q && *q != ' ' && *q != '\n'; q++) ;
                         *q = '\0';
 
@@ -488,7 +498,14 @@ void mark_hostonly(const char *path)
         }
 
         fprintf(f, "%s\n", path);
+}
 
+void dracut_log_cp(const char *path)
+{
+        int ret;
+        ret = fprintf(logfile_f, "%s\n", path);
+        if (ret < 0)
+                log_error("Could not append '%s' to logfile '%s': %m", path, logfile);
 }
 
 static int dracut_install(const char *src, const char *dst, bool isdir, bool resolvedeps, bool hashdst)
@@ -657,6 +674,8 @@ static int dracut_install(const char *src, const char *dst, bool isdir, bool res
                 mark_hostonly(dst);
 
         ret += cp(src, fulldstpath);
+        if (ret == 0 && logfile_f)
+                dracut_log_cp(src);
 
         log_debug("dracut_install ret = %d", ret);
 
@@ -682,6 +701,7 @@ static void usage(int status)
                "  -o --optional       If SOURCE does not exist, do not fail\n"
                "  -d --dir            SOURCE is a directory\n"
                "  -l --ldd            Also install shebang executables and libraries\n"
+               "  -L --logdir <DIR>   Log files, which were installed from the host to <DIR>\n"
                "  -R --resolvelazy    Only install shebang executables and libraries\n"
                "                      for all SOURCE files\n"
                "  -H --fips           Also install all '.SOURCE.hmac' files\n"
@@ -738,10 +758,11 @@ static int parse_argv(int argc, char *argv[])
                 {"all", no_argument, NULL, 'a'},
                 {"fips", no_argument, NULL, 'f'},
                 {"destrootdir", required_argument, NULL, 'D'},
+                {"logdir", required_argument, NULL, 'L'},
                 {NULL, 0, NULL, 0}
         };
 
-        while ((c = getopt_long(argc, argv, "adfhloD:HR", options, NULL)) != -1) {
+        while ((c = getopt_long(argc, argv, "adfhlL:oD:HR", options, NULL)) != -1) {
                 switch (c) {
                 case ARG_VERSION:
                         puts(PROGRAM_VERSION_STRING);
@@ -770,6 +791,9 @@ static int parse_argv(int argc, char *argv[])
                 case 'D':
                         destrootdir = strdup(optarg);
                         break;
+                case 'L':
+                        logdir = strdup(optarg);
+                        break;
                 case 'f':
                         arg_hmac = true;
                         break;
@@ -878,9 +902,9 @@ static int install_one(const char *src, const char *dst)
         int ret = 0;
 
         if (strchr(src, '/') == NULL) {
-                char **q = NULL;
                 char **p = find_binary(src);
                 if (p) {
+			char **q = NULL;
                         STRV_FOREACH(q, p) {
                                 char *newsrc = *q;
                                 log_debug("dracut_install '%s' '%s'", newsrc, dst);
@@ -914,9 +938,9 @@ static int install_all(int argc, char **argv)
                 log_debug("Handle '%s'", argv[i]);
 
                 if (strchr(argv[i], '/') == NULL) {
-                        char **q = NULL;
                         char **p = find_binary(argv[i]);
                         if (p) {
+				char **q = NULL;
                                 STRV_FOREACH(q, p) {
                                         char *newsrc = *q;
                                         log_debug("dracut_install '%s'", newsrc);
@@ -994,6 +1018,23 @@ int main(int argc, char **argv)
                 goto finish;
         }
 
+        if (logdir) {
+                int ret;
+
+                ret = asprintf(&logfile, "%s/%d.log", logdir, getpid());
+                if (ret < 0) {
+                        log_error("Out of memory!");
+                        exit(EXIT_FAILURE);
+                }
+
+                logfile_f = fopen(logfile, "a");
+                if (logfile_f == NULL) {
+                        log_error("Could not open %s for logging: %m", logfile);
+                        r = EXIT_FAILURE;
+                        goto finish;
+                }
+        }
+
         r = EXIT_SUCCESS;
 
         if (((optind + 1) < argc) && (strcmp(argv[optind + 1], destrootdir) == 0)) {
@@ -1022,6 +1063,8 @@ int main(int argc, char **argv)
                 r = EXIT_SUCCESS;
 
  finish:
+        if (logfile_f)
+                fclose(logfile_f);
 
         while ((i = hashmap_steal_first(items)))
                 item_free(i);

install/hashmap.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 

install/hashmap.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef foohashmaphfoo
 #define foohashmaphfoo
 

install/log.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 
@@ -103,11 +101,10 @@ void log_set_facility(int facility) {
 static int write_to_console(
                 int level,
                 const char*file,
-                int line,
+                unsigned int line,
                 const char *func,
                 const char *buffer) {
 
-        char location[64];
         struct iovec iovec[5];
         unsigned n = 0;
 
@@ -119,7 +116,9 @@ static int write_to_console(
         IOVEC_SET_STRING(iovec[n++], "dracut-install: ");
 
         if (show_location) {
-                snprintf(location, sizeof(location), "(%s:%u) ", file, line);
+                char location[64];
+                if (snprintf(location, sizeof(location), "(%s:%u) ", file, line) <= 0)
+                        return -errno;
                 IOVEC_SET_STRING(iovec[n++], location);
         }
 

install/log.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef foologhfoo
 #define foologhfoo
 

install/macro.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #pragma once
 
 /***
@@ -207,7 +205,7 @@ static inline size_t IOVEC_INCREMENT(struct iovec *i, unsigned n, size_t k) {
         for (j = 0; j < n; j++) {
                 size_t sub;
 
-                if (_unlikely_(k <= 0))
+                if (_unlikely_(k == 0))
                         break;
 
                 sub = MIN(i[j].iov_len, k);

install/strv.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 
@@ -84,7 +82,7 @@ char **strv_copy(char * const *l) {
         return r;
 }
 
-unsigned strv_length(char * const *l) {
+unsigned int strv_length(char * const *l) {
         unsigned n = 0;
 
         if (!l)
@@ -299,7 +297,7 @@ char **strv_split_quoted(const char *s) {
 
 char **strv_split_newlines(const char *s) {
         char **l;
-        unsigned n;
+        unsigned int n;
 
         assert(s);
 
@@ -311,7 +309,7 @@ char **strv_split_newlines(const char *s) {
                 return NULL;
 
         n = strv_length(l);
-        if (n <= 0)
+        if (n == 0)
                 return l;
 
         if (isempty(l[n-1])) {
@@ -491,9 +489,9 @@ char **strv_parse_nulstr(const char *s, size_t l) {
         unsigned c = 0, i = 0;
         char **v;
 
-        assert(s || l <= 0);
+        assert(s || l == 0);
 
-        if (l <= 0)
+        if (l == 0)
                 return new0(char*, 1);
 
         for (p = s; p < s + l; p++)

install/strv.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #pragma once
 
 /***
@@ -34,7 +32,7 @@ DEFINE_TRIVIAL_CLEANUP_FUNC(char**, strv_free);
 #define _cleanup_strv_free_ _cleanup_(strv_freep)
 
 char **strv_copy(char * const *l);
-unsigned strv_length(char * const *l) _pure_;
+unsigned int strv_length(char * const *l) _pure_;
 
 char **strv_merge(char **a, char **b);
 char **strv_merge_concat(char **a, char **b, const char *suffix);

install/util.c

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 /***
   This file is part of systemd.
 
@@ -224,7 +222,7 @@ char *strappend(const char *s, const char *suffix) {
 char *strjoin(const char *x, ...) {
         va_list ap;
         size_t l;
-        char *r, *p;
+        char *r;
 
         va_start(ap, x);
 
@@ -257,6 +255,8 @@ char *strjoin(const char *x, ...) {
                 return NULL;
 
         if (x) {
+                char *p;
+
                 p = stpcpy(r, x);
 
                 va_start(ap, x);

install/util.h

@@ -1,5 +1,3 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
 #ifndef fooutilhfoo
 #define fooutilhfoo
 

lsinitrd-bash-completion.sh

@@ -1,7 +1,4 @@
 #
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-#
 # Copyright 2013 Red Hat, Inc.  All rights reserved.
 #
 # This program is free software; you can redistribute it and/or modify

lsinitrd.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Copyright 2005-2010 Harald Hoyer <harald@redhat.com>
 # Copyright 2005-2010 Red Hat, Inc.  All rights reserved.

mkinitrd-suse.sh

@@ -1,6 +1,4 @@
 #!/bin/bash --norc
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # mkinitrd compability wrapper for SUSE.
 #

modules.d/00bash/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/00bootchart/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/00dash/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/00systemd-bootchart/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/01fips/fips-boot.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
     rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1

modules.d/01fips/fips-noboot.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
     rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1

modules.d/01fips/fips.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 mount_boot()
 {

modules.d/01fips/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/02caps/caps.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 capsmode=$(getarg rd.caps)
 

modules.d/02caps/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/02fips-aesni/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/03modsign/load-modsign-keys.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Licensed under the GPLv2
 #

modules.d/03modsign/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Licensed under the GPLv2
 #
@@ -29,7 +27,7 @@ depends() {
 # called by dracut
 install() {
     inst_dir /lib/modules/keys
-    inst_binary /usr/bin/keyctl
+    inst_binary keyctl
 
     inst_hook pre-trigger 01 "$moddir/load-modsign-keys.sh"
 

modules.d/03rescue/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/04watchdog/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/05busybox/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/10i18n/console_init.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 [ -n "$DRACUT_SYSTEMD" ] && exit 0
 

modules.d/10i18n/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
@@ -247,7 +245,7 @@ install() {
     if checks; then
         install_base
 
-        if [[ ${hostonly} ]] && ! [[ ${i18n_install_all} ]]; then
+        if [[ ${hostonly} ]] && ! [[ ${i18n_install_all} == "yes" ]]; then
             install_local_i18n || install_all_kbd
         else
             install_all_kbd

modules.d/10i18n/parse-i18n.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 inst_key_val() {
     local _value

modules.d/30convertfs/convertfs.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 ROOT="$1"
 

modules.d/30convertfs/do-convertfs.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if getargbool 0 rd.convertfs; then
     if getargbool 0 rd.debug; then

modules.d/30convertfs/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/40network/dhclient-script.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 PATH=/usr/sbin:/usr/bin:/sbin:/bin
 
@@ -45,7 +43,7 @@ setup_interface() {
         valid_lft ${lease_time} preferred_lft ${lease_time} \
         dev $netif
 
-    [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
+    [ -n "$gw" ] && echo ip route replace default via $gw dev $netif > /tmp/net.$netif.gw
 
     [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
     if  [ -n "$namesrv" ] ; then

modules.d/40network/dhcp-root.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # This script is sourced, so root should be set. But let's be paranoid
 [ -z "$root" ] && root=$(getarg root=)

modules.d/40network/ifname-genrules.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # if there are no ifname parameters, just use NAME=KERNEL
 if ! getarg ifname= >/dev/null ; then

modules.d/40network/ifup.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # We don't need to check for ip= errors here, that is handled by the
 # cmdline parser script
@@ -60,7 +58,7 @@ fi
 # bridge this interface?
 if [ -e /tmp/bridge.info ]; then
     . /tmp/bridge.info
-    for ethname in $ethnames ; do
+    for ethname in $bridgeslaves ; do
         if [ "$netif" = "$ethname" ]; then
             if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then
                 : # We need to really setup bond (recursive call)
@@ -145,7 +143,7 @@ do_static() {
         ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif
     fi
 
-    [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
+    [ -n "$gw" ] && echo ip route replace default via $gw dev $netif > /tmp/net.$netif.gw
     [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
 
     return 0
@@ -236,7 +234,7 @@ if [ -e /tmp/bridge.info ]; then
     if [ "$netif" = "$bridgename" ] && [ ! -e /tmp/net.$bridgename.up ]; then
         brctl addbr $bridgename
         brctl setfd $bridgename 0
-        for ethname in $ethnames ; do
+        for ethname in $bridgeslaves ; do
             if [ "$ethname" = "$bondname" ] ; then
                 DO_BOND_SETUP=yes ifup $bondname -m
             elif [ "$ethname" = "$teammaster" ] ; then

modules.d/40network/kill-dhclient.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 for f in /tmp/dhclient.*.pid; do
     [ -e $f ] || continue

modules.d/40network/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/40network/net-genrules.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 getargbool 0 rd.neednet && NEEDNET=1
 
@@ -16,7 +14,7 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh
     # bridge: attempt only the defined interface
     if [ -e /tmp/bridge.info ]; then
         . /tmp/bridge.info
-        IFACES="$IFACES ${ethnames%% *}"
+        IFACES="$IFACES ${bridgeslaves%% *}"
         MASTER_IFACES="$MASTER_IFACES $bridgename"
     fi
 

modules.d/40network/net-lib.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 get_ip() {
     local iface="$1" ip=""
@@ -89,6 +87,7 @@ ifdown() {
 
 setup_net() {
     local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES=""
+    local _p
     [ -e /tmp/net.$netif.did-setup ] && return
     [ -e /sys/class/net/$netif/address ] && \
         [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && return
@@ -103,6 +102,20 @@ setup_net() {
     [ -e /tmp/net.$netif.resolv.conf ] && \
         cp -f /tmp/net.$netif.resolv.conf /etc/resolv.conf
 
+    # add static route
+    for _p in $(getargs rd.route); do
+        route_to_var "$_p" || continue
+        [ -n "$route_dev" ] && [ "$route_dev" != "$netif"] && continue
+        ip route add "$route_mask" ${route_gw:+via "$route_gw"} ${route_dev:+dev "$route_dev"}
+        if strstr ":" "$route_mask"; then
+            printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
+                > /tmp/net.route6."$netif"
+        else
+            printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
+                > /tmp/net.route."$netif"
+        fi
+    done
+
     # Handle STP Timeout: arping the default gateway.
     # (or the root server, if a) it's local or b) there's no gateway.)
     # Note: This assumes that if no router is present the
@@ -228,20 +241,25 @@ ibft_to_cmdline() {
             fi
 
             if [ -e ${iface}/vlan ]; then
-               vlan=$(read a < ${iface}/vlan; echo $a)
-               if [ "$vlan" -ne "0" ]; then
-                   case "$vlan" in
-                       [0-9]*)
-                           echo "vlan=$dev.$vlan:$dev"
-                           ;;
-                       *)
-                           echo "vlan=$vlan:$dev"
-                           ;;
-                   esac
-               fi
+                vlan=$(read a < ${iface}/vlan; echo $a)
+                if [ "$vlan" -ne "0" ]; then
+                    case "$vlan" in
+                        [0-9]*)
+                            echo "vlan=$dev.$vlan:$dev"
+                            echo $mac > /tmp/net.${dev}.${vlan}.has_ibft_config
+                            ;;
+                        *)
+                            echo "vlan=$vlan:$dev"
+                            echo $mac > /tmp/net.${vlan}.has_ibft_config
+                            ;;
+                    esac
+                else
+                    echo $mac > /tmp/net.${dev}.has_ibft_config
+                fi
+            else
+                echo $mac > /tmp/net.${dev}.has_ibft_config
             fi
 
-            echo $mac > /tmp/net.${dev}.has_ibft_config
         done
     ) >> /etc/cmdline.d/40-ibft.conf
 }
@@ -251,66 +269,46 @@ parse_iscsi_root()
     local v
     v=${1#iscsi:}
 
-# extract authentication info
+    # extract authentication info
     case "$v" in
-	*@*:*:*:*:*)
-	    authinfo=${v%%@*}
-	    v=${v#*@}
-    # allow empty authinfo to allow having an @ in iscsi_target_name like this:
-    # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
-	    if [ -n "$authinfo" ]; then
-		OLDIFS="$IFS"
-		IFS=:
-		set $authinfo
-		IFS="$OLDIFS"
-		if [ $# -gt 4 ]; then
-		    warn "Wrong authentication info in iscsi: parameter!"
-		    return 1
-		fi
-		iscsi_username=$1
-		iscsi_password=$2
-		if [ $# -gt 2 ]; then
-		    iscsi_in_username=$3
-		    iscsi_in_password=$4
-		fi
-	    fi
-	    ;;
+        *@*:*:*:*:*)
+            authinfo=${v%%@*}
+            v=${v#*@}
+            # allow empty authinfo to allow having an @ in iscsi_target_name like this:
+            # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
+            if [ -n "$authinfo" ]; then
+                OLDIFS="$IFS"
+                IFS=:
+                set $authinfo
+                IFS="$OLDIFS"
+                if [ $# -gt 4 ]; then
+                    warn "Wrong authentication info in iscsi: parameter!"
+                    return 1
+                fi
+                iscsi_username=$1
+                iscsi_password=$2
+                if [ $# -gt 2 ]; then
+                    iscsi_in_username=$3
+                    iscsi_in_password=$4
+                fi
+            fi
+            ;;
     esac
 
-# extract target ip
+    # extract target ip
     case "$v" in
-	[[]*[]]:*)
-	    iscsi_target_ip=${v#[[]}
-		iscsi_target_ip=${iscsi_target_ip%%[]]*}
-	    v=${v#[[]$iscsi_target_ip[]]:}
-	    ;;
-	*)
-	    iscsi_target_ip=${v%%[:]*}
-	    v=${v#$iscsi_target_ip:}
-	    ;;
+        [[]*[]]:*)
+            iscsi_target_ip=${v#[[]}
+                iscsi_target_ip=${iscsi_target_ip%%[]]*}
+            v=${v#[[]$iscsi_target_ip[]]:}
+            ;;
+        *)
+            iscsi_target_ip=${v%%[:]*}
+            v=${v#$iscsi_target_ip:}
+            ;;
     esac
 
-# extract target name
-    case "$v" in
-	*:iqn.*)
-	    iscsi_target_name=iqn.${v##*:iqn.}
-	    v=${v%:iqn.*}:
-	    ;;
-	*:eui.*)
-	    iscsi_target_name=iqn.${v##*:eui.}
-	    v=${v%:iqn.*}:
-	    ;;
-	*:naa.*)
-	    iscsi_target_name=iqn.${v##*:naa.}
-	    v=${v%:iqn.*}:
-	    ;;
-	*)
-	    warn "Invalid iscii target name, should begin with 'iqn.' or 'eui.' or 'naa.'"
-	    return 1
-	    ;;
-    esac
-
-# parse the rest
+    # parse the rest
     OLDIFS="$IFS"
     IFS=:
     set $v
@@ -318,17 +316,25 @@ parse_iscsi_root()
 
     iscsi_protocol=$1; shift # ignored
     iscsi_target_port=$1; shift
-    if [ $# -eq 3 ]; then
-	iscsi_iface_name=$1; shift
-    fi
-    if [ $# -eq 2 ]; then
-	iscsi_netdev_name=$1; shift
+
+    if [ $# -gt 3 ] && [ -n "$1$2" ]; then
+        iscsi_iface_name=$1; shift
+        iscsi_netdev_name=$1; shift
     fi
+
     iscsi_lun=$1; shift
-    if [ $# -ne 0 ]; then
-	warn "Invalid parameter in iscsi: parameter!"
-	return 1
+
+    if [ $# -gt 2 ]; then
+        warn "Invalid parameter in iscsi: parameter!"
+        return 1
     fi
+
+    if [ $# -eq 2 ]; then
+        iscsi_target_name="$1:$2"
+    else
+        iscsi_target_name="$1"
+    fi
+
 }
 
 ip_to_var() {
@@ -369,7 +375,7 @@ ip_to_var() {
                     if [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
                         macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
                     fi
-	            ;;
+                    ;;
             esac
             ;;
     esac
@@ -395,6 +401,33 @@ ip_to_var() {
     fi
 }
 
+route_to_var() {
+    local v=${1}:
+    local i
+    set --
+    while [ -n "$v" ]; do
+        if [ "${v#\[*:*:*\]:}" != "$v" ]; then
+            # handle IPv6 address
+            i="${v%%\]:*}"
+            i="${i##\[}"
+            set -- "$@" "$i"
+            v=${v#\[$i\]:}
+        else
+            set -- "$@" "${v%%:*}"
+            v=${v#*:}
+        fi
+    done
+
+    unset route_mask route_gw route_dev
+    case $# in
+        2)  [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"
+            return 0;;
+        3)  [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"; [ -n "$3" ] && route_dev="$3"
+            return 0;;
+        *)  return 1;;
+    esac
+}
+
 parse_ifname_opts() {
     local IFS=:
     set $1
@@ -490,8 +523,8 @@ linkup() {
 }
 
 type hostname >/dev/null 2>&1 || \
-hostname() {
-	cat /proc/sys/kernel/hostname
+    hostname() {
+    cat /proc/sys/kernel/hostname
 }
 
 iface_has_link() {
@@ -520,8 +553,6 @@ find_iface_with_link() {
 is_persistent_ethernet_name() {
     case "$1" in
         # udev persistent interface names
-        eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]*)
-            ;;
         eno[0-9]|eno[0-9][0-9]|eno[0-9][0-9][0-9]*)
             ;;
         ens[0-9]|ens[0-9][0-9]|ens[0-9][0-9][0-9]*)

modules.d/40network/netroot.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 PATH=/usr/sbin:/usr/bin:/sbin:/bin
 command -v getarg >/dev/null    || . /lib/dracut-lib.sh

modules.d/40network/parse-bridge.sh

@@ -1,11 +1,9 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Format:
-#       bridge=<bridgename>:<ethnames>
+#       bridge=<bridgename>:<bridgeslaves>
 #
-#       <ethnames> is a comma-separated list of physical (ethernet) interfaces
+#       <bridgeslaves> is a comma-separated list of physical (ethernet) interfaces
 #       bridge without parameters assumes bridge=br0:eth0
 #
 
@@ -25,20 +23,20 @@ parsebridge() {
         v=${v#*:}
     done
 
-    unset bridgename ethnames
+    unset bridgename bridgeslaves
     case $# in
-        0)  bridgename=br0; ethnames=$iface ;;
+        0)  bridgename=br0; bridgeslaves=$iface ;;
         1)  die "bridge= requires two parameters" ;;
-        2)  bridgename=$1; ethnames=$(str_replace "$2" "," " ") ;;
+        2)  bridgename=$1; bridgeslaves=$(str_replace "$2" "," " ") ;;
         *)  die "bridge= requires two parameters" ;;
     esac
 }
 
-unset bridgename ethnames
+unset bridgename bridgeslaves
 
 iface=eth0
 
-# Parse bridge for bridgename and ethnames
+# Parse bridge for bridgename and bridgeslaves
 if bridge="$(getarg bridge)"; then
     # Read bridge= parameters if they exist
     if [ -n "$bridge" ]; then
@@ -47,9 +45,9 @@ if bridge="$(getarg bridge)"; then
     # Simple default bridge
     if [ -z "$bridgename" ]; then
         bridgename=br0
-        ethnames=$iface
+        bridgeslaves=$iface
     fi
     echo "bridgename=$bridgename" > /tmp/bridge.info
-    echo "ethnames=\"$ethnames\"" >> /tmp/bridge.info
+    echo "bridgeslaves=\"$bridgeslaves\"" >> /tmp/bridge.info
     return
 fi

modules.d/40network/parse-ibft.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 command -v getarg >/dev/null          || . /lib/dracut-lib.sh
 command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh

modules.d/40network/parse-ifname.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Format:
 #       ifname=<interface>:<mac>

modules.d/40network/parse-ip-opts.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 #
 # Format:
 #       ip=[dhcp|on|any]

modules.d/45ifcfg/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/45ifcfg/write-ifcfg.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # NFS root might have reached here before /tmp/net.ifaces was written
 type is_persistent_ethernet_name >/dev/null 2>&1 || . /lib/net-lib.sh
@@ -82,6 +80,20 @@ print_s390() {
     return 0
 }
 
+interface_bind() {
+    local netif="$1"
+    local macaddr="$2"
+    if ! print_s390 $netif; then
+        if [ -z "$macaddr" ] && \
+            ! is_persistent_ethernet_name "$netif" && \
+            [ -f /sys/class/net/$netif/addr_assign_type ] && \
+            [ "$(cat /sys/class/net/$netif/addr_assign_type)" = "0" ] && \
+            [ -f /sys/class/net/$netif/address ]; then
+            echo "HWADDR=\"$(cat /sys/class/net/$netif/address)\""
+        fi
+    fi
+}
+
 for netup in /tmp/net.*.did-setup ; do
     [ -f $netup ] || continue
 
@@ -114,8 +126,7 @@ for netup in /tmp/net.*.did-setup ; do
     if [ "$netif" = "$vlanname" ]; then
         vlan=yes
     fi
-    [ -e /sys/class/net/$netif/address ] && \
-        cat /sys/class/net/$netif/address > /tmp/net.$netif.hwaddr
+
     {
         echo "# Generated by dracut initrd"
         echo "DEVICE=\"$netif\""
@@ -165,15 +176,7 @@ for netup in /tmp/net.*.did-setup ; do
         # standard interface
         {
             [ -n "$macaddr" ] && echo "MACADDR=\"$macaddr\""
-            if ! print_s390 $netif; then
-                if [ -z "$macaddr" ] && \
-                    ! is_persistent_ethernet_name "$netif" && \
-                    [ -f /sys/class/net/$netif/addr_assign_type ] && \
-                    [ "$(cat /sys/class/net/$netif/addr_assign_type)" = "0" ] && \
-                    [ -f /sys/class/net/$netif/address ]; then
-                    echo "HWADDR=\"$(cat /sys/class/net/$netif/address)\""
-                fi
-            fi
+            interface_bind "$netif" "$macaddr"
             echo "TYPE=Ethernet"
             echo "NAME=\"$netif\""
             [ -n "$mtu" ] && echo "MTU=\"$mtu\""
@@ -200,21 +203,20 @@ for netup in /tmp/net.*.did-setup ; do
 
         for slave in $bondslaves ; do
             # write separate ifcfg file for the raw eth interface
-            {
+            (
                 echo "# Generated by dracut initrd"
                 echo "DEVICE=\"$slave\""
                 echo "TYPE=Ethernet"
                 echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
-                if [ -e /tmp/net.${netif}.${slave}.hwaddr ]; then
-                   echo "HWADDR=\"$(cat /tmp/net.${netif}.${slave}.hwaddr)\""
-                else
-                   echo "HWADDR=\"$(cat /sys/class/net/$slave/address)\""
-                fi
                 echo "SLAVE=yes"
                 echo "MASTER=\"$netif\""
                 echo "NAME=\"$slave\""
-            } >> /tmp/ifcfg/ifcfg-$slave
+                echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
+                [ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override
+                [ -n "$macaddr" ] && echo "MACADDR=\"$macaddr\""
+                interface_bind "$slave" "$macaddr"
+            ) >> /tmp/ifcfg/ifcfg-$slave
         done
     fi
 
@@ -224,50 +226,31 @@ for netup in /tmp/net.*.did-setup ; do
             echo "TYPE=Bridge"
             echo "NAME=\"$netif\""
         } >> /tmp/ifcfg/ifcfg-$netif
-        if [ "$ethname" = "$bondname" ] ; then
-            {
-                echo "# Generated by dracut initrd"
-                echo "DEVICE=\"$bondname\""
-                echo "ONBOOT=yes"
-                echo "NETBOOT=yes"
-                # This variable is an indicator of a bond interface for initscripts
-                echo "BONDING_OPTS=\"$bondoptions\""
-                echo "BRIDGE=\"$netif\""
-                echo "NAME=\"$bondname\""
-            } >> /tmp/ifcfg/ifcfg-$bondname
-            for slave in $bondslaves ; do
-                # write separate ifcfg file for the raw eth interface
-                {
-                    echo "# Generated by dracut initrd"
-                    echo "DEVICE=\"$slave\""
-                    echo "TYPE=Ethernet"
-                    echo "ONBOOT=yes"
-                    echo "NETBOOT=yes"
-                    echo "HWADDR=\"$(cat /sys/class/net/$slave/address)\""
-                    echo "SLAVE=yes"
-                    echo "MASTER=\"$bondname\""
-                    echo "NAME=\"$slave\""
-                } >> /tmp/ifcfg/ifcfg-$slave
-            done
-        else
+        for slave in $bridgeslaves ; do
             # write separate ifcfg file for the raw eth interface
-            {
+            (
                 echo "# Generated by dracut initrd"
-                echo "DEVICE=\"$ethname\""
+                echo "DEVICE=\"$slave\""
                 echo "TYPE=Ethernet"
                 echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
-                echo "HWADDR=\"$(cat /sys/class/net/$ethname/address)\""
-                echo "BRIDGE=\"$netif\""
-                echo "NAME=\"$ethname\""
-            } >> /tmp/ifcfg/ifcfg-$ethname
-        fi
+                echo "BRIDGE=\"$bridgename\""
+                echo "NAME=\"$slave\""
+                echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
+                [ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override
+                [ -n "$macaddr" ] && echo "MACADDR=\"$macaddr\""
+                interface_bind "$slave" "$macaddr"
+            ) >> /tmp/ifcfg/ifcfg-$slave
+        done
     fi
     i=1
     for ns in $(getargs nameserver); do
         echo "DNS${i}=\"${ns}\"" >> /tmp/ifcfg/ifcfg-$netif
         i=$((i+1))
     done
+
+    [ -f /tmp/net.route6."$netif" ] && cp /tmp/net.route6."$netif" /tmp/ifcfg/route6-"$netif"
+    [ -f /tmp/net.route."$netif" ] && cp /tmp/net.route."$netif" /tmp/ifcfg/route-"$netif"
 done
 
 # Pass network opts

modules.d/45url-lib/module-setup.sh

@@ -17,6 +17,7 @@ depends() {
 install() {
     local _dir _crt _found _lib
     inst_simple "$moddir/url-lib.sh" "/lib/url-lib.sh"
+    inst_multiple -o ctorrent
     inst_multiple curl
     # also install libs for curl https
     inst_libdir_file "libnsspem.so*"

modules.d/45url-lib/url-lib.sh

@@ -82,6 +82,38 @@ set_http_header() {
     echo "header = \"$1: $2\"" >> $CURL_HOME/.curlrc
 }
 
+### TORRENT ##########################################################
+
+ctorrent_args="-E 0 -e 0"
+
+ctorrent_fetch_url() {
+    local url="$1" outloc="$2"
+    url=${url#*//}
+    torrent_outloc="$outloc.torrent"
+    echo "$url" > /proc/self/fd/0
+    if [ -n "$outloc" ]; then
+        curl $curl_args --output - -- "$url" > "$torrent_outloc" || return $?
+    else
+        local outdir="$(mkuniqdir /tmp torrent_fetch_url)"
+        ( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
+        torrent_outloc="$outdir/$(ls -A $outdir)"
+        outloc=${torrent_outloc%.*}
+    fi
+    if ! [ -f "$torrent_outloc" ]; then
+        warn "Downloading '$url' failed!"
+        return 253
+    fi
+    ctorrent $ctorrent_args -s $outloc $torrent_outloc >&2
+    if ! [ -f "$outloc" ]; then
+        warn "Torrent download of '$url' failed!"
+        return 253
+    fi
+    if [ -z "$2" ]; then echo "$outloc" ; fi
+}
+
+command -v ctorrent >/dev/null \
+    && add_url_handler ctorrent_fetch_url torrent
+
 ### NFS ##############################################################
 
 [ -e /lib/nfs-lib.sh ] && . /lib/nfs-lib.sh

modules.d/50drm/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
@@ -51,13 +49,24 @@ installkernel() {
         return 0
     }
 
+    if [[ "$(uname -p)" == arm* ]]; then
+        # arm specific modules needed by drm
+        instmods \
+            "=drivers/gpu/drm/i2c" \
+            "=drivers/gpu/drm/panel" \
+            "=drivers/pwm" \
+            "=drivers/video/backlight" \
+            "=drivers/video/fbdev/omap2/displays-new" \
+            ${NULL}
+    fi
+
     for _modname in $(find_kernel_modules_by_path drivers/gpu/drm \
         | drm_module_filter) ; do
         # if the hardware is present, include module even if it is not currently loaded,
         # as we could e.g. be in the installer; nokmsboot boot parameter will disable
         # loading of the driver if needed
         if [[ $hostonly ]] && modinfo -F alias $_modname | sed -e 's,\?,\.,g' -e 's,\*,\.\*,g' \
-            | grep -qxf - /sys/bus/pci/devices/*/modalias 2>/dev/null; then
+            | grep -qxf - /sys/bus/{pci/devices,soc/devices/soc?}/*/modalias 2>/dev/null; then
             hostonly='' instmods $_modname
             continue
         fi

modules.d/50gensplash/gensplash-emergency.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 CDROOT=0
 . /lib/gensplash-lib.sh

modules.d/50gensplash/gensplash-newroot.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 CDROOT=0
 . /lib/gensplash-lib.sh

modules.d/50gensplash/gensplash-pretrigger.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if getargbool 1 rd.splash -d -n rd_NO_SPLASH; then
     info "Starting Gentoo Splash"

modules.d/50gensplash/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/50plymouth/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {
@@ -15,12 +13,18 @@ depends() {
 
 # called by dracut
 install() {
-    if grep -q nash /usr/libexec/plymouth/plymouth-populate-initrd \
-        || [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
+    PKGLIBDIR="/usr/lib/plymouth"
+    if type -P dpkg-architecture &>/dev/null; then
+        PKGLIBDIR="/usr/lib/$(dpkg-architecture -qDEB_HOST_MULTIARCH)/plymouth"
+    fi
+    [ -x /usr/libexec/plymouth/plymouth-populate-initrd ] && PKGLIBDIR="/usr/libexec/plymouth"
+
+    if grep -q nash ${PKGLIBDIR}/plymouth-populate-initrd \
+        || [ ! -x ${PKGLIBDIR}/plymouth-populate-initrd ]; then
         . "$moddir"/plymouth-populate-initrd.sh
     else
         PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
-            /usr/libexec/plymouth/plymouth-populate-initrd -t "$initdir"
+            ${PKGLIBDIR}/plymouth-populate-initrd -t "$initdir"
     fi
 
     inst_hook emergency 50 "$moddir"/plymouth-emergency.sh

modules.d/50plymouth/plymouth-emergency.sh

@@ -1,4 +1,3 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
 plymouth --hide-splash 2>/dev/null || :

modules.d/50plymouth/plymouth-newroot.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if type plymouth >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
     plymouth --newroot=$NEWROOT

modules.d/50plymouth/plymouth-populate-initrd.sh

@@ -1,6 +1,5 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
 PLYMOUTH_LOGO_FILE="/usr/share/pixmaps/system-logo-white.png"
 PLYMOUTH_THEME=$(plymouth-set-default-theme)
 

modules.d/50plymouth/plymouth-pretrigger.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if type plymouthd >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
     if getargbool 1 plymouth.enable && getargbool 1 rd.plymouth -d -n rd_NO_PLYMOUTH; then

modules.d/80cms/cms-write-ifcfg.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
 

modules.d/80cms/cmsifup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
 

modules.d/80cms/cmssetup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
 
@@ -44,147 +42,147 @@ function dasd_settle() {
 }
 
 function dasd_settle_all() {
-    for dasdccw in $(while read line; do echo ${line%%(*}; done < /proc/dasd/devices) ; do
+    for dasdccw in $(while read line; do echo "${line%%(*}"; done < /proc/dasd/devices) ; do
         if ! dasd_settle $dasdccw ; then
             echo $"Could not access DASD $dasdccw in time"
             return 1
         fi
     done
     return 0
-    }
+}
 
 # prints a canonocalized device bus ID for a given devno of any format
-    function canonicalize_devno()
-    {
-        case ${#1} in
-            3) echo "0.0.0${1}" ;;
-            4) echo "0.0.${1}" ;;
-            *) echo "${1}" ;;
-        esac
-        return 0
-    }
+function canonicalize_devno()
+{
+    case ${#1} in
+        3) echo "0.0.0${1}" ;;
+        4) echo "0.0.${1}" ;;
+        *) echo "${1}" ;;
+    esac
+    return 0
+}
 
 # read file from CMS and write it to /tmp
-    function readcmsfile() # $1=dasdport $2=filename
-    {
-        local dev
-        local numcpus
-        local devname
-        local ret=0
-        if [ $# -ne 2 ]; then return; fi
+function readcmsfile() # $1=dasdport $2=filename
+{
+    local dev
+    local numcpus
+    local devname
+    local ret=0
+    if [ $# -ne 2 ]; then return; fi
     # precondition: udevd created dasda block device node
-        if ! dasd_cio_free -d $1 ; then
-            echo $"DASD $1 could not be cleared from device blacklist"
-            return 1
-        fi
+    if ! dasd_cio_free -d $1 ; then
+        echo $"DASD $1 could not be cleared from device blacklist"
+        return 1
+    fi
 
-        modprobe dasd_mod dasd=$CMSDASD
-        modprobe dasd_eckd_mod
-        udevadm settle
+    modprobe dasd_mod dasd=$CMSDASD
+    modprobe dasd_eckd_mod
+    udevadm settle
 
     # precondition: dasd_eckd_mod driver incl. dependencies loaded,
     #               dasd_mod must be loaded without setting any DASD online
-        dev=$(canonicalize_devno $1)
-        numcpus=$(
-	    while read line; do
-	        if strstr "$line" "# processors"; then
-		    echo ${line##*:};
-		    break;
-	        fi;
-	    done < /proc/cpuinfo
-        )
+    dev=$(canonicalize_devno $1)
+    numcpus=$(
+        while read line; do
+            if strstr "$line" "# processors"; then
+                echo ${line##*:};
+                break;
+            fi;
+        done < /proc/cpuinfo
+    )
 
-        if [ ${numcpus} -eq 1 ]; then
-            echo 1 > /sys/bus/ccw/devices/$dev/online
-        else
-            if ! sysecho /sys/bus/ccw/devices/$dev/online 1; then
-                echo $"DASD $dev could not be set online"
-                return 1
-            fi
-            udevadm settle
-            if ! dasd_settle $dev ; then
-                echo $"Could not access DASD $dev in time"
-                return 1
-            fi
+    if [ ${numcpus} -eq 1 ]; then
+        echo 1 > /sys/bus/ccw/devices/$dev/online
+    else
+        if ! sysecho /sys/bus/ccw/devices/$dev/online 1; then
+            echo $"DASD $dev could not be set online"
+            return 1
         fi
-
         udevadm settle
-
-        devname=$(cd /sys/bus/ccw/devices/$dev/block; set -- *; [ -b /dev/$1 ] && echo $1)
-        devname=${devname:-dasda}
-
-        [[ -d /mnt ]] || mkdir /mnt
-        if cmsfs-fuse --to=UTF-8 -a /dev/$devname /mnt; then
-	    cat /mnt/$2 > /run/initramfs/$2
-            umount /mnt || umount -l /mnt
-            udevadm settle
-        else
-            echo $"Could not read conf file $2 on CMS DASD $1."
-            ret=1
+        if ! dasd_settle $dev ; then
+            echo $"Could not access DASD $dev in time"
+            return 1
         fi
+    fi
 
-        if ! sysecho /sys/bus/ccw/devices/$dev/online 0; then
-            echo $"DASD $dev could not be set offline again"
+    udevadm settle
+
+    devname=$(cd /sys/bus/ccw/devices/$dev/block; set -- *; [ -b /dev/$1 ] && echo $1)
+    devname=${devname:-dasda}
+
+    [[ -d /mnt ]] || mkdir /mnt
+    if cmsfs-fuse --to=UTF-8 -a /dev/$devname /mnt; then
+        cat /mnt/$2 > /run/initramfs/$2
+        umount /mnt || umount -l /mnt
+        udevadm settle
+    else
+        echo $"Could not read conf file $2 on CMS DASD $1."
+        ret=1
+    fi
+
+    if ! sysecho /sys/bus/ccw/devices/$dev/online 0; then
+        echo $"DASD $dev could not be set offline again"
         #return 1
-        fi
-        udevadm settle
+    fi
+    udevadm settle
 
     # unbind all dasds to unload the dasd modules for a clean start
-        ( cd /sys/bus/ccw/drivers/dasd-eckd; for i in *.*; do echo $i > unbind;done)
-        udevadm settle
-        modprobe -r dasd_eckd_mod
-        udevadm settle
-        modprobe -r dasd_diag_mod
-        udevadm settle
-        modprobe -r dasd_mod
-        udevadm settle
-        return $ret
-    }
+    ( cd /sys/bus/ccw/drivers/dasd-eckd; for i in *.*; do echo $i > unbind;done)
+    udevadm settle
+    modprobe -r dasd_eckd_mod
+    udevadm settle
+    modprobe -r dasd_diag_mod
+    udevadm settle
+    modprobe -r dasd_mod
+    udevadm settle
+    return $ret
+}
 
-    processcmsfile()
-    {
-        source /tmp/cms.conf
-        SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')"
+processcmsfile()
+{
+    source /tmp/cms.conf
+    SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')"
 
-        if [[ $NETTYPE ]]; then
-	    (
-	        echo -n $NETTYPE,$SUBCHANNELS
-	        [[ $PORTNAME ]] && echo -n ",portname=$PORTNAME"
-	        [[ $LAYER2 ]] && echo -n ",layer2=$LAYER2"
-	        [[ "$NETTYPE" = "ctc" ]] && [[ $CTCPROT ]] && echo -n ",protocol=$CTCPROT"
-	        echo
-	    ) >> /etc/ccw.conf
+    if [[ $NETTYPE ]]; then
+        (
+            echo -n $NETTYPE,$SUBCHANNELS
+            [[ $PORTNAME ]] && echo -n ",portname=$PORTNAME"
+            [[ $LAYER2 ]] && echo -n ",layer2=$LAYER2"
+            [[ "$NETTYPE" = "ctc" ]] && [[ $CTCPROT ]] && echo -n ",protocol=$CTCPROT"
+            echo
+        ) >> /etc/ccw.conf
 
-	    OLDIFS=$IFS
-	    IFS=,
-	    read -a subch_array <<< "indexzero,$SUBCHANNELS"
-	    IFS=$OLDIFS
-	    devbusid=${subch_array[1]}
-            if [ "$NETTYPE" = "ctc" ]; then
-                driver="ctcm"
-            else
-                driver=$NETTYPE
-            fi
+        OLDIFS=$IFS
+        IFS=,
+        read -a subch_array <<< "indexzero,$SUBCHANNELS"
+        IFS=$OLDIFS
+        devbusid=${subch_array[1]}
+        if [ "$NETTYPE" = "ctc" ]; then
+            driver="ctcm"
+        else
+            driver=$NETTYPE
+        fi
 
-	    printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="%s", KERNELS=="%s", ENV{INTERFACE}=="?*", RUN+="/sbin/initqueue --onetime --unique --name cmsifup-$env{INTERFACE} /sbin/cmsifup $env{INTERFACE}"\n' "$driver" "$devbusid" > /etc/udev/rules.d/99-cms.rules
+        printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="%s", KERNELS=="%s", ENV{INTERFACE}=="?*", RUN+="/sbin/initqueue --onetime --unique --name cmsifup-$env{INTERFACE} /sbin/cmsifup $env{INTERFACE}"\n' "$driver" "$devbusid" > /etc/udev/rules.d/99-cms.rules
         # remove the default net rules
-            rm -f -- /etc/udev/rules.d/91-default-net.rules
-	    [[ -f /etc/udev/rules.d/90-net.rules ]] \
-	        || printf 'SUBSYSTEM=="net", ACTION=="online", RUN+="/sbin/initqueue --onetime --env netif=$env{INTERFACE} source_hook initqueue/online"\n' >> /etc/udev/rules.d/99-cms.rules
-            udevadm control --reload
-	    znet_cio_free
-        fi
+        rm -f -- /etc/udev/rules.d/91-default-net.rules
+        [[ -f /etc/udev/rules.d/90-net.rules ]] \
+            || printf 'SUBSYSTEM=="net", ACTION=="online", RUN+="/sbin/initqueue --onetime --env netif=$env{INTERFACE} source_hook initqueue/online"\n' >> /etc/udev/rules.d/99-cms.rules
+        udevadm control --reload
+        znet_cio_free
+    fi
 
-        if [[ $DASD ]]; then
-	    echo $DASD | normalize_dasd_arg > /etc/dasd.conf
-	    echo "options dasd_mod dasd=$DASD" > /etc/modprobe.d/dasd_mod.conf
-	    dasd_cio_free
-        fi
+    if [[ $DASD ]] && [[ $DASD != "none" ]]; then
+        echo $DASD | normalize_dasd_arg > /etc/dasd.conf
+        echo "options dasd_mod dasd=$DASD" > /etc/modprobe.d/dasd_mod.conf
+        dasd_cio_free
+    fi
 
-        unset _do_zfcp
-        for i in ${!FCP_*}; do
-	    echo "${!i}" | while read port rest; do
-                case $port in
+    unset _do_zfcp
+    for i in ${!FCP_*}; do
+        echo "${!i}" | while read port rest; do
+            case $port in
                 *.*.*)
                     ;;
                 *.*)
@@ -193,23 +191,23 @@ function dasd_settle_all() {
                 *)
                     port="0.0.$port"
                     ;;
-                esac
-                echo $port $rest >> /etc/zfcp.conf
-            done
-	    _do_zfcp=1
+            esac
+            echo $port $rest >> /etc/zfcp.conf
         done
-        [[ $_do_zfcp ]] && zfcp_cio_free
-        unset _do_zfcp
-    }
+        _do_zfcp=1
+    done
+    [[ $_do_zfcp ]] && zfcp_cio_free
+    unset _do_zfcp
+}
 
-    [[ $CMSDASD ]] || CMSDASD=$(getarg "CMSDASD=")
-    [[ $CMSCONFFILE ]] || CMSCONFFILE=$(getarg "CMSCONFFILE=")
+[[ $CMSDASD ]] || CMSDASD=$(getarg "CMSDASD=")
+[[ $CMSCONFFILE ]] || CMSCONFFILE=$(getarg "CMSCONFFILE=")
 
 # Parse configuration
-    if [ -n "$CMSDASD" -a -n "$CMSCONFFILE" ]; then
-        if readcmsfile $CMSDASD $CMSCONFFILE; then
-            ln -s /run/initramfs/$CMSCONFFILE /tmp/$CMSCONFFILE
-            ln -s /run/initramfs/$CMSCONFFILE /tmp/cms.conf
-            processcmsfile
-        fi
+if [ -n "$CMSDASD" -a -n "$CMSCONFFILE" ]; then
+    if readcmsfile $CMSDASD $CMSCONFFILE; then
+        ln -s /run/initramfs/$CMSCONFFILE /tmp/$CMSCONFFILE
+        ln -s /run/initramfs/$CMSCONFFILE /tmp/cms.conf
+        processcmsfile
     fi
+fi

modules.d/80cms/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/90btrfs/btrfs_device_ready.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
 

modules.d/90btrfs/btrfs_finished.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
 

modules.d/90btrfs/btrfs_timeout.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
 

modules.d/90btrfs/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/90crypt/crypt-cleanup.sh

@@ -1,6 +1,5 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
+
 # close everything which is not busy
 rm -f -- /etc/udev/rules.d/70-luks.rules >/dev/null 2>&1
 

modules.d/90crypt/crypt-lib.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 command -v getarg >/dev/null || . /lib/dracut-lib.sh
 

modules.d/90crypt/crypt-run-generator.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 . /lib/dracut-lib.sh
 type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh

modules.d/90crypt/cryptroot-ask.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 PATH=/usr/sbin:/usr/bin:/sbin:/bin
 NEWROOT=${NEWROOT:-"/sysroot"}

modules.d/90crypt/module-setup.sh

@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 # called by dracut
 check() {

modules.d/90crypt/parse-crypt.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh
 

modules.d/90crypt/parse-keydev.sh

@@ -1,6 +1,4 @@
 #!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
 
 if getargbool 1 rd.luks -n rd_NO_LUKS && \
         [ -n "$(getarg rd.luks.key)" ]; then