NEWS & AUTHORS update - 042

newer Fedora kernel install the kernel to /lib/modules

.dir-locals.el

@@ -1,2 +1,3 @@
-(setq sh-basic-offset: 4)
-(setq indent-tabs-mode nil)
+((nil . ((setq sh-basic-offset: 4)
+         (setq indent-tabs-mode nil)
+         )))

.mailmap

@@ -10,7 +10,9 @@ Andrey Borzenkov <arvidjaar@gmail.com> 		<arvidjaar@mail.ru>
 Dan Horák <dhorak@redhat.com> 			<dan@danny.cz>
 John Reiser <jreiser@bitwagon.com> 		<jreiser@BitWagon.com>
 Luca Berra <bluca@vodka.it> 			<bluca@comedia.it>
-Dave Young <dyoung@redhat.com>	 		dyoung@redhat.com
+Dave Young <dyoung@redhat.com>	 		<dyoung@redhat.com>
+Dave Young <dyoung@redhat.com>	 		<dave@redhat.com>
 Frederick Grose <fgrose@sugarlabs.org> 		<fgrose@gmail.com>
 Frederic Crozat <fcrozat@suse.com> 		<fcrozat@mandriva.com>
 Shawn W Dunn <sfalken@opensuse.org> 		<sfalken@opensuse.org>
+Kyle McMartin <kmcmarti@redhat.com>             <kyle@redhat.com>

50-dracut.install

@@ -12,18 +12,20 @@ case "$COMMAND" in
         if [[ -f ${INITRD_IMAGE_PREGENERATED} ]]; then
             # we found an initrd at the same place as the kernel
             # use this and don't generate a new one
-            cp "$INITRD_IMAGE_PREGENERATED" "$BOOT_DIR_ABS/initrd" \
+            cp --reflink=auto "$INITRD_IMAGE_PREGENERATED" "$BOOT_DIR_ABS/initrd" \
                 && chown root:root "$BOOT_DIR_ABS/initrd" \
                 && chmod 0600 "$BOOT_DIR_ABS/initrd" \
                 && exit 0
         fi
 
         if [[ -f /etc/kernel/cmdline ]]; then
-            readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+            read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
+        elif [[ -f /usr/lib/kernel/cmdline ]]; then
+            read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
         fi
 
-        if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-            read -ar BOOT_OPTIONS < /proc/cmdline
+        if ! [[ ${BOOT_OPTIONS[*]} ]]; then
+            read -r -d '' -a BOOT_OPTIONS < /proc/cmdline
         fi
 
         unset noimageifnotneeded

51-dracut-rescue-postinst.sh

@@ -57,7 +57,7 @@ if [[ ! -f $INITRDFILE ]]; then
 fi
 
 if [[ ! -f $NEW_KERNEL_IMAGE ]]; then
-    cp "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
+    cp --reflink=auto "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
     ((ret+=$?))
 fi
 

51-dracut-rescue.install

@@ -40,12 +40,22 @@ fi
 [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
 
 if [[ -f /etc/kernel/cmdline ]]; then
-    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+    read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
+elif [[ -f /usr/lib/kernel/cmdline ]]; then
+    read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
 fi
+
 if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-    read -ar BOOT_OPTIONS < /proc/cmdline
+    read -r -d '' -a line < /proc/cmdline
+    for i in "${line[@]}"; do
+        [[ "${i#initrd=*}" != "$i" ]] && continue
+        BOOT_OPTIONS+=("$i")
+    done
 fi
-if ! [[ $BOOT_OPTIONS ]]; then
+
+if ! [[ ${BOOT_OPTIONS[*]} ]]; then
+    echo "Could not determine the kernel command line parameters." >&2
+    echo "Please specify the kernel command line in /etc/kernel/cmdline!" >&2
     exit 1
 fi
 
@@ -69,7 +79,7 @@ case "$COMMAND" in
 
         [[ -d "$BOOT_DIR_ABS" ]] || mkdir -p "$BOOT_DIR_ABS"
 
-        if ! cp "$KERNEL_IMAGE" "$BOOT_DIR_ABS"/linux; then
+        if ! cp --reflink=auto "$KERNEL_IMAGE" "$BOOT_DIR_ABS"/linux; then
             echo "Can't copy '$KERNEL_IMAGE to '$BOOT_DIR_ABS/linux'!" >&2
         fi
 

AUTHORS

@@ -7,36 +7,43 @@ Warren Togami <wtogami@redhat.com>
 Jeremy Katz <katzj@redhat.com>
 Dave Young <dyoung@redhat.com>
 David Dillow <dave@thedillows.org>
+Hannes Reinecke <hare@suse.de>
 Michal Soltys <soltys@ziu.info>
-Amerigo Wang <amwang@redhat.com>
 Colin Guthrie <colin@mageia.org>
+Amerigo Wang <amwang@redhat.com>
+Thomas Renninger <trenn@suse.de>
+WANG Chao <chaowang@redhat.com>
 Andrey Borzenkov <arvidjaar@gmail.com>
 Peter Jones <pjones@redhat.com>
-WANG Chao <chaowang@redhat.com>
 Andreas Thienemann <andreas@bawue.net>
-Hannes Reinecke <hare@suse.de>
 Hans de Goede <hdegoede@redhat.com>
+Alexander Tsoy <alexander@tsoy.me>
 John Reiser <jreiser@bitwagon.com>
 Luca Berra <bluca@vodka.it>
-Thomas Renninger <trenn@suse.de>
-Alexander Tsoy <alexander@tsoy.me>
-Daniel Drake <dsd@laptop.org>
 Brian C. Lane <bcl@redhat.com>
+Daniel Drake <dsd@laptop.org>
 Dan Horák <dhorak@redhat.com>
 Baoquan He <bhe@redhat.com>
 Leho Kraav <leho@kraav.com>
 Kamil Rytarowski <n54@gmx.com>
 Marc Grimme <grimme@atix.de>
+NeilBrown <neilb@suse.de>
 Peter Rajnoha <prajnoha@redhat.com>
+Radek Vykydal <rvykydal@redhat.com>
+Thorsten Behrens <tbehrens@suse.com>
 Chao Wang <chaowang@redhat.com>
 Colin Walters <walters@verbum.org>
+Cristian Rodríguez <crrodriguez@opensuse.org>
+Fabian Deutsch <fabiand@fedoraproject.org>
 Frederic Crozat <fcrozat@suse.com>
+James Lee <jlee@thestaticvoid.com>
 Jesse Keating <jkeating@redhat.com>
 Milan Broz <mbroz@redhat.com>
-Radek Vykydal <rvykydal@redhat.com>
+Nicolas Chauvet <kwizart@gmail.com>
 Roberto Sassu <roberto.sassu@polito.it>
 Anton Blanchard <anton@samba.org>
 Bill Nottingham <notting@redhat.com>
+Chapman Flack <g2@anastigmatix.net>
 David Cantrell <dcantrell@redhat.com>
 Dennis Gilmore <dennis@ausil.us>
 Jon Ander Hernandez <jonan.h@gmail.com>
@@ -44,21 +51,32 @@ Juan RP <xtraeme@gmail.com>
 Lance Albertson <lance@osuosl.org>
 Marian Ganisin <mganisin@redhat.com>
 Michael Ploujnikov <plouj@somanetworks.com>
+Peter Robinson <pbrobinson@gmail.com>
+Stefan Reimer <it@startux.de>
 Stig Telfer <stelfer@cray.com>
+Vasiliy Tolstov <v.tolstov@selfip.ru>
+Ville Skyttä <ville.skytta@iki.fi>
 Wim Muskee <wimmuskee@gmail.com>
 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
 Alan Pevec <apevec@redhat.com>
-Cristian Rodríguez <crrodriguez@opensuse.org>
+Alex Harpin <development@landsofshadow.co.uk>
+Daniel Schaal <farbing@web.de>
+Erwan Velu <erwan.velu@enovance.com>
 Frederick Grose <fgrose@sugarlabs.org>
+Hari Bathini <hbathini@linux.vnet.ibm.com>
 Ian Dall <ian@beware.dropbear.id.au>
 James Buren <ryuo@frugalware.org>
-James Lee <jlee@thestaticvoid.com>
+Jan Synacek <jsynacek@redhat.com>
 Joey Boggs <jboggs@redhat.com>
 Koen Kooi <koen@dominion.thruhere.net>
 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Kyle McMartin <kmcmarti@redhat.com>
+Lubomir Rintel <lkundrak@v3.sk>
+Lukas Wunner <lukas@wunner.de>
 Mike Snitzer <snitzer@redhat.com>
+Minfei Huang <mhuang@redhat.com>
 Przemysław Rudy <prudy1@o2.pl>
-Stefan Reimer <it@startux.de>
+Thomas Backlund <tmb@mageia.org>
 Thomas Lange <lange@informatik.uni-koeln.de>
 Till Maas <opensource@till.name>
 Vivek Goyal <vgoyal@redhat.com>
@@ -67,52 +85,63 @@ Adam Williamson <awilliam@redhat.com>
 Alexander Todorov <atodorov@redhat.com>
 Andy Lutomirski <luto@mit.edu>
 Anssi Hannula <anssi@mageia.org>
+Antony Messerli <amesserl@rackspace.com>
 Brandon Philips <brandon@ifup.co>
 Canek Peláez Valdés <caneko@gmail.com>
+Chao Fan <cfan@redhat.com>
 Chris Leech <cleech@redhat.com>
 Christian Heinz <christian.ch.heinz@gmail.com>
+Christian Rodrigues <crrodriguez@opensuse.org>
 Cong Wang <amwang@redhat.com>
-Daniel Schaal <farbing@web.de>
+Daniel Drake <drake@endlessm.com>
 Dave Jones <davej@redhat.com>
-Dave Young <dave@redhat.com>
 Dennis Schridde <devurandom@gmx.net>
+Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
 Duane Griffin <duaneg@dghda.com>
+Gerd von Egidy <gerd.von.egidy@intra2net.com>
 Glen Gray <slaine@slaine.org>
-Hari Bathini <hbathini@linux.vnet.ibm.com>
 Hermann Gausterer <git-dracut-2012@mrq1.org>
 James Laska <jlaska@redhat.com>
 Jan Stodola <jstodola@redhat.com>
 Jiri Pirko <jiri@resnulli.us>
 Joe Lawrence <Joe.Lawrence@stratus.com>
+Jonas Jonsson <jonas@websystem.se>
+Julian Wolf <juwolf@suse.com>
 Kevin Yung <Kevin.Yung@myob.com>
-Kyle McMartin <kmcmarti@redhat.com>
-Kyle McMartin <kyle@redhat.com>
 Lars R. Damerow <lars@pixar.com>
 Lennert Buytenhek <buytenh@wantstofly.org>
-Lubomir Rintel <lkundrak@v3.sk>
+Lukas Nykryn <lnykryn@redhat.com>
+Major Hayden <major@mhtx.net>
 Marian Csontos <mcsontos@redhat.com>
+Marko Myllynen <myllynen@redhat.com>
 Matt <smoothsailing72@hotmail.com>
 Matt Smith <shadowfax@gmx.com>
 Michal Schmidt <mschmidt@redhat.com>
 Mike Gorse <mgorse@suse.com>
+Moritz 'Morty' Strübe <morty@gmx.net>
 Munehiro Matsuda <haro@kgt.co.jp>
-Nicolas Chauvet <kwizart@gmail.com>
+Nikoli <nikoli@gmx.us>
 Nikoli <nikoli@lavabit.com>
 Olivier Blin <dev@blino.org>
 P J P <ppandit@redhat.com>
 Paolo Bonzini <pbonzini@redhat.com>
 Peter Robinson <pbrobinson@fedoraproject.org>
+Praveen_Paladugu@Dell.com <Praveen_Paladugu@Dell.com>
 Pádraig Brady <P@draigBrady.com>
 Quentin Armitage <quentin@armitage.org.uk>
 Robert Buchholz <rbu@goodpoint.de>
+Rusty Bird <rustybird@openmailbox.org>
 Sergey Fionov <fionov@gmail.com>
 Shawn W Dunn <sfalken@opensuse.org>
 Srinivasa T N <seenutn@linux.vnet.ibm.com>
 Thilo Bangert <thilo.bangert@gmx.net>
-Thomas Backlund <tmb@mageia.org>
+Tobias Geerinckx <tobias.geerinckx@gmail.com>
+Tom Gundersen <teg@jklm.no>
 Tomasz Torcz <tomek@pipebreaker.pl>
 Vadim Kuznetsov <vadimk@gentoo.org>
-Ville Skyttä <ville.skytta@iki.fi>
+Vaughan Cao <vaughan.cao@oracle.com>
 Vratislav Podzimek <vpodzime@redhat.com>
 Yanko Kaneti <yaneti@declera.com>
+jloeser <jloeser@suse.de>
 maximilian attems <max@stro.at>
+xtraeme <xtraeme@voidlinux.eu>

Makefile

@@ -13,8 +13,9 @@ sysconfdir ?= ${prefix}/etc
 bindir ?= ${prefix}/bin
 mandir ?= ${prefix}/share/man
 CFLAGS ?= -O2 -g -Wall
-CFLAGS += -std=gnu99  -D_FILE_OFFSET_BITS=64 -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
+CFLAGS += -std=gnu99 -D_FILE_OFFSET_BITS=64 -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
 bashcompletiondir ?= ${datadir}/bash-completion/completions
+pkgconfigdatadir ?= $(datadir)/pkgconfig
 
 man1pages = lsinitrd.1
 
@@ -28,20 +29,20 @@ man8pages = dracut.8 \
             dracut-catimages.8 \
             mkinitrd.8 \
             mkinitrd-suse.8 \
-            modules.d/98systemd/dracut-cmdline.service.8 \
-            modules.d/98systemd/dracut-initqueue.service.8 \
-            modules.d/98systemd/dracut-mount.service.8 \
-            modules.d/98systemd/dracut-shutdown.service.8 \
-            modules.d/98systemd/dracut-pre-mount.service.8 \
-            modules.d/98systemd/dracut-pre-pivot.service.8 \
-            modules.d/98systemd/dracut-pre-trigger.service.8 \
-            modules.d/98systemd/dracut-pre-udev.service.8
+            modules.d/98dracut-systemd/dracut-cmdline.service.8 \
+            modules.d/98dracut-systemd/dracut-initqueue.service.8 \
+            modules.d/98dracut-systemd/dracut-mount.service.8 \
+            modules.d/98dracut-systemd/dracut-shutdown.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-mount.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-pivot.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-trigger.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-udev.service.8
 
 manpages = $(man1pages) $(man5pages) $(man7pages) $(man8pages)
 
 .PHONY: install clean archive rpm testimage test all check AUTHORS doc dracut-version.sh
 
-all: dracut-version.sh dracut-install skipcpio/skipcpio
+all: dracut-version.sh dracut.pc dracut-install skipcpio/skipcpio
 
 DRACUT_INSTALL_OBJECTS = \
         install/dracut-install.o \
@@ -96,7 +97,15 @@ dracut.html: dracut.asc $(manpages) dracut.css dracut.usage.asc
 		http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
 	rm -f -- dracut.xml
 
-install: dracut-version.sh
+dracut.pc: Makefile.inc Makefile
+	@echo "Name: dracut" > dracut.pc
+	@echo "Description: dracut" >> dracut.pc
+	@echo "Version: $(VERSION)$(GITVERSION)" >> dracut.pc
+	@echo "dracutdir=$(pkglibdir)" >> dracut.pc
+	@echo "dracutmodulesdir=$(pkglibdir)/modules.d" >> dracut.pc
+	@echo "dracutconfdir=$(pkglibdir)/dracut.conf.d" >> dracut.pc
+
+install: all
 	mkdir -p $(DESTDIR)$(pkglibdir)
 	mkdir -p $(DESTDIR)$(bindir)
 	mkdir -p $(DESTDIR)$(sysconfdir)
@@ -124,7 +133,7 @@ ifneq ($(enable_documentation),no)
 endif
 	if [ -n "$(systemdsystemunitdir)" ]; then \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
-		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
+		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants; \
 		ln -s ../dracut-shutdown.service \
 		$(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants/dracut-shutdown.service; \
@@ -138,7 +147,7 @@ endif
 		    dracut-pre-trigger.service \
 		    dracut-pre-udev.service \
 		    ; do \
-			ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
+			ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
 			ln -s ../$$i \
 			$(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants/$$i; \
 		done \
@@ -155,6 +164,8 @@ endif
 	mkdir -p $(DESTDIR)${bashcompletiondir}
 	install -m 0644 dracut-bash-completion.sh $(DESTDIR)${bashcompletiondir}/dracut
 	install -m 0644 lsinitrd-bash-completion.sh $(DESTDIR)${bashcompletiondir}/lsinitrd
+	mkdir -p $(DESTDIR)${pkgconfigdatadir}
+	install -m 0644 dracut.pc $(DESTDIR)${pkgconfigdatadir}/dracut.pc
 
 dracut-version.sh:
 	@echo "DRACUT_VERSION=$(VERSION)$(GITVERSION)" > dracut-version.sh
@@ -212,7 +223,7 @@ check: all syncheck rpm
 	@$(MAKE) -C test check
 
 testimage: all
-	./dracut.sh -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	./dracut.sh -N -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img
 
 debugtestimage: all
@@ -234,7 +245,7 @@ hostimage: all
 	@echo wrote  test-$(shell uname -r).img
 
 AUTHORS:
-	git shortlog  --numbered --summary -e |while read a rest; do echo $$rest;done > AUTHORS
+	git shortlog  --numbered --summary -e |while read a rest || [ -n "$$rest" ]; do echo $$rest;done > AUTHORS
 
 dracut.html.sign: dracut-$(VERSION).tar.xz dracut.html
 	gpg-sign-all dracut-$(VERSION).tar.xz dracut.html

NEWS

@@ -1,3 +1,64 @@
+dracut-042
+==========
+- fixed dmsetup shutdown
+- new kernel command line option "rd.live.overlay.thin"
+    This option changes the underlying mechanism for the overlay in the
+    dmsquash module.
+    Instead of a plain dm snapshot a dm thin snapshot is used. The advantage
+    of the thin snapshot is, that the TRIM command is recognized, which
+    means that at runtime, only the occupied blocks will be claimed from
+    memory, and freed blocks will really be freed in ram.
+- dmsquash: Add squashfs support to rd.live.fsimg
+    Previously rd.live.fsimg only supported filesystems residing in
+    (compressed) archives.
+    Now rd.live.fsimg can also be used when a squashfs image is used.
+    This is achieved by extracting the rootfs image from the squashfs and
+    then continue with the default routines for rd.live.fsimg.
+- lvm: add support for LVM system id
+- split up the systemd dracut module
+    Basic systemd functionality is in 00systemd now.
+    Switching root and the initrd.target is in 00systemd-initrd.
+    Dracut additions to the systemd initrd are in 98dracut-systemd.
+- support for creating a UEFI boot executable via argument "--uefi"
+    With an EFI stub, the kernel, the initramfs and a kernel cmdline can be
+    glued together to a single UEFI executable, which can be booted by a
+    UEFI BIOS.
+- network: split out kernel-network-modules, now in 90kernel-network-modules
+- support for ethernet point-to-point connections configured via DHCP
+- kernel-modules: install all HID drivers
+- dracut.pc pkg-config file
+- mount /dev, /dev/shm and /run noexec
+
+dracut-041
+==========
+- fixed the shutdown loop
+- fixed gzip compression for versions, which do not have --rsyncable
+- fixed ifcfg generation for persistent interface names
+- multipath:
+  * new option to turn off multipath "rd.multipath=0" completly
+  * preload scsi dh modules
+  * start multipathd via systemd service
+- do not fail, if user pressed ESC during media check
+- fixed systemd-journal by symlinking /var/log to /run/initramfs/log
+- initrd-release moved to /usr/lib
+- lots of iSCSI fixes
+- new "rd.timeout" to specify the systemd JobTimeoutSec for devices
+- if $initrd/etc/cmdline.d/* has a "root=" and the kernel cmdline does not,
+  generate a mount unit for it
+- increased the initqueue timeout for non systemd initramfs to 180s
+- $initrd/etc/cmdline.d/ hostonly files are now generated for NFS
+- make use of systemd-hibernate-resume, if available
+- fixed ldconfig parsing for hwcap output
+- network: add support for comma separated autoconf options like ip=eth0:auto6,dhcp
+- new parameter "rd.live.overlay.size" to specify the overlay for live images
+- changed the test suite for the new sfdisk syntax
+- added cache tools for dm-cache setups
+
+dracut-040
+==========
+- fixed dracut module dependency checks
+- fixed test suite
+
 dracut-039
 ==========
 - DRACUT_PATH can now be used to specify the PATH used by dracut

README.testsuite

@@ -1,14 +1,17 @@
 For the testsuite to work, you will have to install at least the following software packages:
-dash
-asciidoc
-mdadm
-lvm2
-cryptsetup
-nfs-utils
-netbsd-iscsi
-nbd
-dhcp (dhcp-server on openSUSE)
+dash \
+bridge-utils \
+asciidoc \
+mdadm \
+lvm2 \
+cryptsetup \
+nfs-utils \
+netbsd-iscsi \
+nbd \
+dhcp-server \
 iscsi-initiator-utils
+
+
 TEST-04-FULL-SYSTEMD: systemd >= 187
 
 How to run the testsuite:

TODO

@@ -6,6 +6,8 @@ Items are ordered in priority.
 
 INITRAMFS TODO
 
+- search domain string
+- peerdns=no
 - allow dual stack configuration (IPv4, IPv6) for the same interface
 - "bind-mount" kernel drivers in real root for the rescue image,
   if the real root does not have any kernel modules for this kernel
@@ -28,6 +30,7 @@ GENERATOR TODO
 
 - report errors on missing files in check()
 - remove wait for swap devs, if no "resume=" is given on the kernel command line
+- remove wait for swap devs, if the "resume" dracut module is not included (omitted)
 - add presets (predefined set of modules)
 - add interpreter/plugin-scripts to be sourced at the beginning or end (can use dracut-functions)
 - add mechanism for module specific command line options

dracut-bash-completion.sh

@@ -32,6 +32,7 @@ _dracut() {
                               --xz --no-compress --gzip --list-modules --show-modules --keep
                               --printsize --regenerate-all --noimageifnotneeded --early-microcode
                               --no-early-microcode --print-cmdline --prelink --noprelink --reproducible
+                              --uefi
                               '
 
                        [ARG]='-a -m -o -d -I -k -c -L --kver --add --force-add --add-drivers
@@ -39,7 +40,7 @@ _dracut() {
                               --fwdir --libdirs --fscks --add-fstab --mount --device --nofscks
                               --kmoddir --conf --confdir --tmpdir --stdlog --compress --prefix
                               --kernel-cmdline --sshkey --persistent-policy --install-optional
-                              --loginstall
+                              --loginstall --uefi-stub --kernel-image
                               '
         )
 

dracut-functions.sh

@@ -104,17 +104,7 @@ fi
 
 ldconfig_paths()
 {
-    local a i
-    declare -A a
-    for i in $(
-        ldconfig -pN 2>/dev/null | grep -F '=>' | grep -E -v '/(lib|lib64|usr/lib|usr/lib64)/[^/]*$' | while read a b c d; do
-            d=${d%/*}
-            printf "%s\n" "$d";
-        done
-    ); do
-        a["$i"]=1;
-    done;
-    printf "%s\n" ${!a[@]}
+    ldconfig -pN 2>/dev/null | grep -E -v '/(lib|lib64|usr/lib|usr/lib64)/[^/]*$' | sed -n 's,.* => \(.*\)/.*,\1,p' | sort | uniq
 }
 
 # Detect lib paths
@@ -176,7 +166,13 @@ srcmods="/lib/modules/$kernel/"
 }
 export srcmods
 
-if ! type dinfo >/dev/null 2>&1; then
+# is_func <command>
+# Check whether $1 is a function.
+is_func() {
+    [[ "$(type -t "$1")" = "function" ]]
+}
+
+if ! is_func dinfo >/dev/null 2>&1; then
     . "$dracutbasedir/dracut-logger.sh"
     dlog_init
 fi
@@ -209,12 +205,6 @@ mksubdirs() {
     [[ -e ${1%/*} ]] || mkdir -m 0755 -p -- "${1%/*}"
 }
 
-# is_func <command>
-# Check whether $1 is a function.
-is_func() {
-    [[ "$(type -t "$1")" = "function" ]]
-}
-
 # Function prints global variables in format name=value line by line.
 # $@ = list of global variables' name
 print_vars() {
@@ -319,7 +309,7 @@ get_fs_env() {
     [[ $1 ]] || return
     unset ID_FS_TYPE
     ID_FS_TYPE=$(blkid -u filesystem -o export -- "$1" \
-        | while read line; do
+        | while read line || [ -n "$line" ]; do
             if [[ "$line" == TYPE\=* ]]; then
                 printf "%s" "${line#TYPE=}";
                 exit 0;
@@ -445,7 +435,7 @@ find_block_device() {
     if [[ $use_fstab != yes ]]; then
         [[ -d $_find_mpt/. ]]
         findmnt -e -v -n -o 'MAJ:MIN,SOURCE' --target "$_find_mpt" | { \
-            while read _majmin _dev; do
+            while read _majmin _dev || [ -n "$_dev" ]; do
                 if [[ -b $_dev ]]; then
                     if ! [[ $_majmin ]] || [[ $_majmin == 0:* ]]; then
                         _majmin=$(get_maj_min $_dev)
@@ -466,7 +456,7 @@ find_block_device() {
     # fall back to /etc/fstab
 
     findmnt -e --fstab -v -n -o 'MAJ:MIN,SOURCE' --target "$_find_mpt" | { \
-        while read _majmin _dev; do
+        while read _majmin _dev || [ -n "$_dev" ]; do
             if ! [[ $_dev ]]; then
                 _dev="$_majmin"
                 unset _majmin
@@ -502,7 +492,7 @@ find_mp_fstype() {
 
     if [[ $use_fstab != yes ]]; then
         findmnt -e -v -n -o 'FSTYPE' --target "$1" | { \
-            while read _fs; do
+            while read _fs || [ -n "$_fs" ]; do
                 [[ $_fs ]] || continue
                 [[ $_fs = "autofs" ]] && continue
                 printf "%s" "$_fs"
@@ -511,7 +501,7 @@ find_mp_fstype() {
     fi
 
     findmnt --fstab -e -v -n -o 'FSTYPE' --target "$1" | { \
-        while read _fs; do
+        while read _fs || [ -n "$_fs" ]; do
             [[ $_fs ]] || continue
             [[ $_fs = "autofs" ]] && continue
             printf "%s" "$_fs"
@@ -538,7 +528,7 @@ find_dev_fstype() {
 
     if [[ $use_fstab != yes ]]; then
         findmnt -e -v -n -o 'FSTYPE' --source "$_find_dev" | { \
-            while read _fs; do
+            while read _fs || [ -n "$_fs" ]; do
                 [[ $_fs ]] || continue
                 [[ $_fs = "autofs" ]] && continue
                 printf "%s" "$_fs"
@@ -547,7 +537,7 @@ find_dev_fstype() {
     fi
 
     findmnt --fstab -e -v -n -o 'FSTYPE' --source "$_find_dev" | { \
-        while read _fs; do
+        while read _fs || [ -n "$_fs" ]; do
             [[ $_fs ]] || continue
             [[ $_fs = "autofs" ]] && continue
             printf "%s" "$_fs"
@@ -698,10 +688,12 @@ for_each_host_dev_and_slaves()
 # but you cannot create the logical volume without the volume group.
 # And the volume group might be bigger than the devices the LV needs.
 check_vol_slaves() {
-    local _lv _vg _pv
+    local _lv _vg _pv _dm
     for i in /dev/mapper/*; do
         [[ $i == /dev/mapper/control ]] && continue
         _lv=$(get_maj_min $i)
+        _dm=/sys/dev/block/$_lv/dm
+        [[ -f $_dm/uuid  && $(<$_dm/uuid) =~ LVM-* ]] || continue
         if [[ $_lv = $2 ]]; then
             _vg=$(lvm lvs --noheadings -o vg_name $i 2>/dev/null)
             # strip space
@@ -743,6 +735,8 @@ fi
 
 if ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/dracut-install ]]; then
     DRACUT_INSTALL=$dracutbasedir/dracut-install
+elif ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/install/dracut-install ]]; then
+    DRACUT_INSTALL=$dracutbasedir/install/dracut-install
 fi
 
 if ! [[ -x $DRACUT_INSTALL ]]; then
@@ -983,7 +977,7 @@ inst_rules_wildcard() {
             _found=$_rule
         fi
     done
-    if [ -n ${hostonly} ] ; then
+    if [[ -n ${hostonly} ]] ; then
         for _rule in ${_target}/$1 ; do
             if [[ -f $_rule ]]; then
                 inst_rule_programs "$_rule"
@@ -1003,7 +997,7 @@ prepare_udev_rules() {
     for f in "$@"; do
         f="${initdir}/etc/udev/rules.d/$f"
         [ -e "$f" ] || continue
-        while read line; do
+        while read line || [ -n "$line" ]; do
             if [ "${line%%IMPORT PATH_ID}" != "$line" ]; then
                 if [ $UDEVVERSION -ge 174 ]; then
                     printf '%sIMPORT{builtin}="path_id"\n' "${line%%IMPORT PATH_ID}"
@@ -1136,7 +1130,7 @@ inst_opt_decompress() {
 # or the "check" script, if module-setup.sh is not found
 # "check $hostonly" is called
 module_check() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     local _forced=0
     local _hostonly=$hostonly
@@ -1167,7 +1161,7 @@ module_check() {
 # or the "check" script, if module-setup.sh is not found
 # "mount_needs=1 check 0" is called
 module_check_mount() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     mount_needs=1
     [[ -d $_moddir ]] || return 1
@@ -1192,7 +1186,7 @@ module_check_mount() {
 # execute the depends() function of module-setup.sh of <dracut module>
 # or the "depends" script, if module-setup.sh is not found
 module_depends() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     [[ -d $_moddir ]] || return 1
     if [[ ! -f $_moddir/module-setup.sh ]]; then
@@ -1215,7 +1209,7 @@ module_depends() {
 # execute the cmdline() function of module-setup.sh of <dracut module>
 # or the "cmdline" script, if module-setup.sh is not found
 module_cmdline() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     [[ -d $_moddir ]] || return 1
     if [[ ! -f $_moddir/module-setup.sh ]]; then
@@ -1236,7 +1230,7 @@ module_cmdline() {
 # execute the install() function of module-setup.sh of <dracut module>
 # or the "install" script, if module-setup.sh is not found
 module_install() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     [[ -d $_moddir ]] || return 1
     if [[ ! -f $_moddir/module-setup.sh ]]; then
@@ -1257,7 +1251,7 @@ module_install() {
 # execute the installkernel() function of module-setup.sh of <dracut module>
 # or the "installkernel" script, if module-setup.sh is not found
 module_installkernel() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     [[ -d $_moddir ]] || return 1
     if [[ ! -f $_moddir/module-setup.sh ]]; then
@@ -1279,7 +1273,7 @@ module_installkernel() {
 # device and filesystem types in "${host_fs_types[@]}"
 check_mount() {
     local _mod=$1
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     local _moddep
 
@@ -1314,13 +1308,17 @@ check_mount() {
         fi
     fi
 
-
     for _moddep in $(module_depends $_mod); do
         # handle deps as if they were manually added
-        [[ " $add_dracutmodules " == *\ $_moddep\ * ]] || \
-            add_dracutmodules+=" $_moddep "
-        [[ " $force_add_dracutmodules " == *\ $_moddep\ * ]] || \
-            force_add_dracutmodules+=" $_moddep "
+        [[ " $dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $dracutmodules " != *\ $_moddep\ * ]] \
+            && dracutmodules+=" $_moddep "
+        [[ " $add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \
+            && add_dracutmodules+=" $_moddep "
+        [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \
+            && force_add_dracutmodules+=" $_moddep "
         # if a module we depend on fail, fail also
         if ! check_module $_moddep; then
             derror "dracut module '$_mod' depends on '$_moddep', which can't be installed"
@@ -1340,7 +1338,7 @@ check_mount() {
 # that the modules were checked for the dependency tracking process
 check_module() {
     local _mod=$1
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     local _moddep
     # If we are already scheduled to be loaded, no need to check again.
@@ -1358,7 +1356,7 @@ check_module() {
     fi
 
     if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then
-        if [[ " $force_add_dracutmodules " == *\ $_mod\ * ]]; then
+        if [[ " $dracutmodules $force_add_dracutmodules " == *\ $_mod\ * ]]; then
             module_check $_mod 1; ret=$?
         else
             module_check $_mod 0; ret=$?
@@ -1369,7 +1367,11 @@ check_module() {
         # module not in our list
         if [[ $dracutmodules = all ]]; then
             # check, if we can and should install this module
-            module_check $_mod || return 1
+            module_check $_mod; ret=$?
+            if [[ $ret != 0 ]]; then
+                [[ $2 ]] && return 1
+                [[ $ret != 255 ]] && return 1
+            fi
         else
             # skip this module
             return 1
@@ -1378,10 +1380,15 @@ check_module() {
 
     for _moddep in $(module_depends $_mod); do
         # handle deps as if they were manually added
-        [[ " $add_dracutmodules " == *\ $_moddep\ * ]] || \
-            add_dracutmodules+=" $_moddep "
-        [[ " $force_add_dracutmodules " == *\ $_moddep\ * ]] || \
-            force_add_dracutmodules+=" $_moddep "
+        [[ " $dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $dracutmodules " != *\ $_moddep\ * ]] \
+            && dracutmodules+=" $_moddep "
+        [[ " $add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \
+            && add_dracutmodules+=" $_moddep "
+        [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \
+            && [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \
+            && force_add_dracutmodules+=" $_moddep "
         # if a module we depend on fail, fail also
         if ! check_module $_moddep; then
             derror "dracut module '$_mod' depends on '$_moddep', which can't be installed"
@@ -1418,11 +1425,13 @@ for_each_module_dir() {
         [[ " $mods_to_load " == *\ $_mod\ * ]] && continue
 
         [[ " $force_add_dracutmodules " != *\ $_mod\ * ]] \
+            && [[ " $dracutmodules " != *\ $_mod\ * ]] \
             && [[ " $omit_dracutmodules " == *\ $_mod\ * ]] \
             && continue
 
         derror "dracut module '$_mod' cannot be found or installed."
         [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] && exit 1
+        [[ " $dracutmodules " == *\ $_mod\ * ]] && exit 1
         [[ " $add_dracutmodules " == *\ $_mod\ * ]] && exit 1
     done
 }
@@ -1442,7 +1451,7 @@ install_kmod_with_fw() {
 
     if [[ $omit_drivers ]]; then
         local _kmod=${1##*/}
-        _kmod=${_kmod%.ko}
+        _kmod=${_kmod%.ko*}
         _kmod=${_kmod/-/_}
         if [[ "$_kmod" =~ $omit_drivers ]]; then
             dinfo "Omitting driver $_kmod"
@@ -1456,7 +1465,7 @@ install_kmod_with_fw() {
 
     if [[ $silent_omit_drivers ]]; then
         local _kmod=${1##*/}
-        _kmod=${_kmod%.ko}
+        _kmod=${_kmod%.ko*}
         _kmod=${_kmod/-/_}
         [[ "$_kmod" =~ $silent_omit_drivers ]] && return 0
         [[ "${1##*/lib/modules/$kernel/}" =~ $silent_omit_drivers ]] && return 0
@@ -1503,7 +1512,7 @@ for_each_kmod_dep() {
     local _func=$1 _kmod=$2 _cmd _modpath _options
     shift 2
     modprobe "$@" --ignore-install --show-depends $_kmod 2>&${_fderr} | (
-        while read _cmd _modpath _options; do
+        while read _cmd _modpath _options || [ -n "$_cmd" ]; do
             [[ $_cmd = insmod ]] || continue
             $_func ${_modpath} || exit $?
         done
@@ -1519,7 +1528,7 @@ dracut_kernel_post() {
             --ignore-install --show-depends --set-version $kernel \
             < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist" 2>/dev/null \
             | sort -u \
-            | while read _cmd _modpath _options; do
+            | while read _cmd _modpath _options || [ -n "$_cmd" ]; do
             [[ $_cmd = insmod ]] || continue
             echo "$_modpath"
         done > "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"
@@ -1528,7 +1537,7 @@ dracut_kernel_post() {
             if [[ $DRACUT_INSTALL ]] && [[ -z $_moddirname ]]; then
                 xargs -r $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} -a < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"
             else
-                while read _modpath; do
+                while read _modpath || [ -n "$_modpath" ]; do
                     local _destpath=$_modpath
                     [[ $_moddirname ]] && _destpath=${_destpath##$_moddirname/}
                     _destpath=${_destpath##*/lib/modules/$kernel/}
@@ -1536,12 +1545,12 @@ dracut_kernel_post() {
                 done < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"
             fi
         ) &
-        _pid=$(jobs -p | while read a ; do printf ":$a";done)
+        _pid=$(jobs -p | while read a  || [ -n "$a" ]; do printf ":$a";done)
         _pid=${_pid##*:}
 
         if [[ $DRACUT_INSTALL ]]; then
             xargs -r modinfo -k $kernel -F firmware < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep" \
-                | while read line; do
+                | while read line || [ -n "$line" ]; do
                 for _fwdir in $fw_dir; do
                     echo $_fwdir/$line;
                 done;
@@ -1580,7 +1589,7 @@ module_is_host_only() {
     local _mod=$1
     local _modenc a i _k _s _v _aliases
     _mod=${_mod##*/}
-    _mod=${_mod%.ko}
+    _mod=${_mod%.ko*}
     _modenc=${_mod//-/_}
 
     [[ " $add_drivers " == *\ ${_mod}\ * ]] && return 0
@@ -1626,7 +1635,7 @@ find_kernel_modules_by_path () {
 
     _OLDIFS=$IFS
     IFS=:
-    while read a rest; do
+    while read a rest || [ -n "$a" ]; do
         [[ $a = */$1/* ]] || [[ $a = updates/* ]] || continue
         printf "%s\n" "$srcmods/$a"
     done < "$srcmods/modules.dep"
@@ -1670,11 +1679,18 @@ instmods() {
             --*) _mpargs+=" $_mod" ;;
             *)
                 _mod=${_mod##*/}
+                # Check for aliased modules
+                _modalias=$(modinfo -k $kernel -F filename $_mod 2> /dev/null)
+                _modalias=${_modalias%.ko*}
+                if [[ $_modalias ]] && [ "${_modalias##*/}" != "${_mod%.ko*}" ] ; then
+                    _mod=${_modalias##*/}
+                fi
+
                 # if we are already installed, skip this module and go on
                 # to the next one.
                 if [[ $DRACUT_KERNEL_LAZY_HASHDIR ]] && \
-                    [[ -f "$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko}.ko" ]]; then
-                    read _ret <"$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko}.ko"
+                    [[ -f "$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko*}" ]]; then
+                    read _ret <"$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko*}"
                     return $_ret
                 fi
 
@@ -1704,7 +1720,7 @@ instmods() {
                     ((_ret+=$?))
                 else
                     [[ $DRACUT_KERNEL_LAZY_HASHDIR ]] && \
-                        echo $_mod >> "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist"
+                        echo ${_mod%.ko*} >> "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist"
                 fi
                 ;;
         esac
@@ -1714,20 +1730,18 @@ instmods() {
     function instmods_1() {
         local _mod _mpargs
         if (($# == 0)); then  # filenames from stdin
-            while read _mod; do
+            while read _mod || [ -n "$_mod" ]; do
                 inst1mod "${_mod%.ko*}" || {
-                    if [[ "$_check" == "yes" ]]; then
-                        [[ "$_silent" == "no" ]] && dfatal "Failed to install module $_mod"
-                        return 1
+                    if [[ "$_check" == "yes" ]] && [[ "$_silent" == "no" ]]; then
+                        dfatal "Failed to install module $_mod"
                     fi
                 }
             done
         fi
         while (($# > 0)); do  # filenames as arguments
             inst1mod ${1%.ko*} || {
-                if [[ "$_check" == "yes" ]]; then
-                    [[ "$_silent" == "no" ]] && dfatal "Failed to install module $1"
-                    return 1
+                if [[ "$_check" == "yes" ]] && [[ "$_silent" == "no" ]]; then
+                    dfatal "Failed to install module $1"
                 fi
             }
             shift
@@ -1739,7 +1753,7 @@ instmods() {
     # Capture all stderr from modprobe to _fderr. We could use {var}>...
     # redirections, but that would make dracut require bash4 at least.
     eval "( instmods_1 \"\$@\" ) ${_fderr}>&1" \
-        | while read line; do [[ "$line" =~ $_filter_not_found ]] || echo $line;done | derror
+        | while read line || [ -n "$line" ]; do [[ "$line" =~ $_filter_not_found ]] || echo $line;done | derror
     _ret=$?
     return $_ret
 }

dracut-initramfs-restore.sh

@@ -2,6 +2,10 @@
 
 set -e
 
+# do some sanity checks first
+[ -e /run/initramfs/bin/sh ] && exit 0
+[ -e /run/initramfs/.need_shutdown ] || exit 0
+
 KERNEL_VERSION="$(uname -r)"
 
 [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
@@ -10,6 +14,8 @@ SKIP="$dracutbasedir/skipcpio"
 
 [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
 
+mount -o ro /boot &>/dev/null
+
 if [[ $MACHINE_ID ]] && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
     IMG="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
 fi
@@ -18,6 +24,7 @@ fi
 cd /run/initramfs
 
 [ -f .need_shutdown -a -f "$IMG" ] || exit 1
+
 if $SKIP "$IMG" | zcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then
     rm -f -- .need_shutdown
 elif $SKIP "$IMG" | xzcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then

dracut-logger.sh

@@ -365,7 +365,7 @@ dlog() {
     if (( $# > 1 )); then
         _do_dlog "$@"
     else
-        while read line; do
+        while read line || [ -n "$line" ]; do
             _do_dlog "$1" "$line"
         done
     fi

dracut.8.asc

@@ -31,7 +31,7 @@ early userspace.
 For a complete list of kernel command line options see *dracut.cmdline*(7).
 
 If you are dropped to an emergency shell, while booting your initramfs,
-the file _/run/initramfs/rdsosreport.txt_ is created, which can be safed to a
+the file _/run/initramfs/rdsosreport.txt_ is created, which can be saved to a
 (to be mounted by hand) partition (usually /boot) or a USB stick.
 Additional debugging info can be produced by adding **rd.debug** to the kernel
 command line. _/run/initramfs/rdsosreport.txt_ contains all logs and the output
@@ -465,6 +465,20 @@ will not be able to boot.
 **--loginstall _<DIR>_::
     Log all files installed from the host to _<DIR>_.
 
+**--uefi::
+    Instead of creating an initramfs image, dracut will create an UEFI executable,
+    which can be executed by an UEFI BIOS.
+
+**--uefi-stub _<FILE>_::
+    Specifies the UEFI stub loader, which will load the attached kernel, initramfs and
+    kernel command line and boots the kernel. The default is
+    _/lib/systemd/boot/efi/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+    or _/usr/lib/gummiboot/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+
+**--kernel-image _<FILE>_::
+    Specifies the kernel image, which to include in the UEFI executable. The default is
+    _/lib/modules/<KERNEL-VERSION>/vmlinuz_ or _/boot/vmlinuz-<KERNEL-VERSION>_
+
 FILES
 -----
 _/var/log/dracut.log_::

dracut.cmdline.7.asc

@@ -142,11 +142,16 @@ Misc
     have been loaded. This parameter can be specified multiple times.
 
 **rd.retry=**__<seconds>__::
-    specify how long dracut should wait for devices to appear.
+    specify how long dracut should retry the initqueue to configure devices.
     The default is 30 seconds. After 2/3 of the time, degraded raids are force
     started. If you have hardware, which takes a very long time to announce its
     drives, you might want to extend this value.
 
+**rd.timeout=**__<seconds>__::
+    specify how long dracut should wait for devices to appear. The
+    default is '0', which means 'forever'. Note that this timeout
+    should be longer than rd.retry to allow for proper configuration.
+
 **rd.noverifyssl**::
     accept self-signed certificates for ssl downloads.
 
@@ -158,7 +163,7 @@ Misc
 Debug
 ~~~~~
 If you are dropped to an emergency shell, the file 
-_/run/initramfs/rdsosreport.txt_ is created, which can be safed to a (to be
+_/run/initramfs/rdsosreport.txt_ is created, which can be saved to a (to be
 mounted by hand) partition (usually /boot) or a USB stick. Additional debugging
 info can be produced by adding **rd.debug** to the kernel command line.
 _/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools.
@@ -379,6 +384,11 @@ DM RAID
    only activate the raid sets with the given UUID. This parameter can be
    specified multiple times.
 
+MULTIPATH
+~~~~~~~~~
+**rd.multipath=0**::
+   disable multipath detection
+
 FIPS
 ~~~~
 **rd.fips**::
@@ -824,11 +834,39 @@ Enables debug output from the live boot process.
 Specifies the directory within the squashfs where the ext3fs.img or rootfs.img
 can be found.  By default, this is __LiveOS__.
 
+**rd.live.ram=**1::
+Copy the complete image to RAM and use this for booting. This is useful
+when the image resides on i.e. a DVD which needs to be ejected later on.
+
+**rd.live.overlay=**_<devspec>_:_(<pathspec>|auto)__
+Allow the usage of a permanent overlay.
+_<devspec>_ specifies the path to a device with a mountable filesystem.
+_<pathspec>_ is the path to a file within that filesystem, which shall be used to
+persist the changes made to the device specified by **root=live:__<url>__** option.
++
+[listing]
+.Example
+--
+rd.live.overlay=/dev/sdb1:persistent-overlay.img
+--
+
+**rd.live.overlay.thin=**1::
+Enables the usage of thin snapshots instead of classic dm snapshots.
+The advantage of thin snapshots is, that they support discards, and will free
+blocks which are not claimed by the filesystem. In this use case this means,
+that memory is given back to the kernel, when the filesystem does not claim it
+anymore.
+
 **rd.writable.fsimg=**1::
 Enables writable filesystem support.  The system will boot with a fully 
 writable filesystem without snapshots __(see notes above about available live boot options)__.
 You can use the **rootflags** option to set mount options for the live
 filesystem as well __(see documentation about rootflags in the **Standard** section above)__.
+This implies that the whole image is copied to RAM before the boot continues.
++
+NOTE: There must be enough free RAM available to hold the complete image.
++
+This method is very suitable for diskless boots.
 
 
 Plymouth Boot Splash
@@ -952,6 +990,8 @@ rd_NO_MD:: rd.md=0
 
 rd_MD_UUID:: rd.md.uuid
 
+rd_NO_MULTIPATH: rd.multipath=0
+
 rd_NFS_DOMAIN:: rd.nfs.domain
 
 iscsi_initiator:: rd.iscsi.initiator

dracut.conf.5.asc

@@ -10,7 +10,8 @@ dracut.conf - configuration file(s) for dracut
 
 SYNOPSIS
 --------
-_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_
+_/etc/dracut.conf_
+_/etc/dracut.conf.d/\*.conf_
 _/usr/lib/dracut/dracut.conf.d/*.conf_
 
 Description
@@ -74,6 +75,13 @@ Configuration files must have the extension .conf; other extensions are ignored.
     Specify additional files to include in the initramfs, separated by spaces,
     if they exist.
 
+*compress=*"__{bzip2|lzma|xz|gzip|lzo|lz4|<compressor [args ...]>}__"::
+    Compress the generated initramfs using the passed compression program. If
+    you pass it just the name of a compression program, it will call that
+    program with known-working arguments. If you pass arguments, it will be called
+    with exactly those arguments. Depending on what you pass, this may result in
+    an initramfs that the kernel cannot decompress.
+
 *do_strip=*"__{yes|no}__"::
     Strip binaries in the initramfs (default=yes)
 
@@ -84,7 +92,7 @@ Configuration files must have the extension .conf; other extensions are ignored.
     Host-Only mode: Install only what is needed for booting the local host
     instead of a generic host and generate host-specific configuration.
 
-*hostonly_cmdline*"__{yes|no}__"::
+*hostonly_cmdline=*"__{yes|no}__"::
     If set, store the kernel command line arguments needed in the initramfs
 
 *persistent_policy=*"__<policy>__"::
@@ -189,6 +197,16 @@ provide a valid _/etc/fstab_.
 *loginstall=*"__<DIR>__"::
     Log all files installed from the host to _<DIR>_.
 
+*uefi_stub=*"_<FILE>_"::
+    Specifies the UEFI stub loader, which will load the attached kernel, initramfs and
+    kernel command line and boots the kernel. The default is
+    _/lib/systemd/boot/efi/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+    or _/usr/lib/gummiboot/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+
+*kernel_image=*"_<FILE>_"::
+    Specifies the kernel image, which to include in the UEFI executable. The default is
+    _/lib/modules/<KERNEL-VERSION>/vmlinuz_ or _/boot/vmlinuz-<KERNEL-VERSION>_
+
 Files
 -----
 _/etc/dracut.conf_::

dracut.conf.d/fedora.conf.example

@@ -2,8 +2,10 @@
 
 # i18n
 i18n_vars="/etc/sysconfig/keyboard:KEYTABLE-KEYMAP /etc/sysconfig/i18n:SYSFONT-FONT,FONTACM-FONT_MAP,FONT_UNIMAP"
-i18n_default_font="latarcyrheb-sun16"
+i18n_default_font="eurlatgr"
 i18n_install_all="yes"
+
+
 stdloglvl=3
 sysloglvl=5
 install_optional_items+=" vi /etc/virc ps grep cat rm "
@@ -13,3 +15,5 @@ systemdsystemunitdir=/usr/lib/systemd/system
 systemdsystemconfdir=/etc/systemd/system
 udevdir=/usr/lib/udev
 hostonly="yes"
+hostonly_cmdline="no"
+early_microcode="yes"

dracut.conf.d/suse.conf.example

@@ -1,3 +1,24 @@
+# SUSE specifc dracut settings
+#
+# SUSE by default always builds a as small as possible initrd for performance
+# and resource reasons.
+# If you like to build a generic initrd which works on other platforms than
+# on the one dracut/mkinitrd got called comment out below setting(s).
+hostonly="yes"
+hostonly_cmdline="yes"
+
+compress="xz -0 --check=crc32 --memlimit-compress=50%"
+
 i18n_vars="/etc/sysconfig/language:RC_LANG-LANG,RC_LC_ALL-LC_ALL /etc/sysconfig/console:CONSOLE_UNICODEMAP-FONT_UNIMAP,CONSOLE_FONT-FONT,CONSOLE_SCREENMAP-FONT_MAP /etc/sysconfig/keyboard:KEYTABLE-KEYMAP"
 omit_drivers+=" i2o_scsi"
 
+# Below adds additional tools to the initrd which are not urgently necessary to
+# bring up the system, but help to debug problems.
+# See /usr/lib/dracut/modules.d/95debug/module-setup.sh which additional tools
+# are installed and add more if you need them. This specifically helps if you
+# use:
+# rd.break=[cmdline|pre-udev|pre-trigger|initqueue|pre-mount|
+# mount|pre-pivot|cleanup]
+# boot parameter or if you are forced to enter the dracut emergency shell.
+
+# add_dracutmodules+=debug

dracut.modules.7.asc

@@ -19,7 +19,7 @@ you can replace init with your own version of _99base_, this is not encouraged.
 Instead you should use, if possible, the hooks of dracut. All hooks, and the
 point of time in which they are executed, are described in <<stages>>.
 
-The main script, which creates the initramfs is dracut itsself. It parses all
+The main script, which creates the initramfs is dracut itself. It parses all
 arguments and sets up the directory, in which everything is installed. It then
 executes all check, install, installkernel scripts found in the modules, which
 are to be processed. After everything is installed, the install directory is

dracut.sh

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/bash --norc
 #
 # Generator script for a dracut initramfs
 # Tries to retain some degree of compatibility with the command line
@@ -195,6 +195,10 @@ Creates initial ramdisk images for preloading modules
   --logfile [FILE]      Logfile to use (overrides configuration setting)
   --reproducible        Create reproducible images
   --loginstall [DIR]    Log all files installed from the host to [DIR]
+  --uefi                Create an UEFI executable with the kernel cmdline and
+                        kernel combined
+  --uefi-stub [FILE]    Use the UEFI stub [FILE] to create an UEFI executable
+  --kernel-image [FILE] location of the kernel image
 
 If [LIST] has multiple arguments, then you have to put these in quotes.
 
@@ -219,6 +223,16 @@ push() {
     done
 }
 
+# Fills up host_devs stack variable and makes sure there are no duplicates
+push_host_devs() {
+    local _dev
+    for _dev in ${host_devs[@]}; do
+        [ "$_dev" = "$1" ] && return
+    done
+    push host_devs "$1"
+}
+
+
 # function pop()
 # pops the last value from a stack
 # assigns value to second argument variable
@@ -379,6 +393,9 @@ rearrange_params()
         --long no-early-microcode \
         --long reproducible \
         --long loginstall: \
+        --long uefi \
+        --long uefi-stub: \
+        --long kernel-image: \
         -- "$@")
 
     if (( $? != 0 )); then
@@ -567,6 +584,11 @@ while :; do
         --regenerate-all) regenerate_all="yes";;
         --noimageifnotneeded) noimageifnotneeded="yes";;
         --reproducible) reproducible_l="yes";;
+        --uefi)        uefi="yes";;
+        --uefi-stub)
+                       uefi_stub_l="$2";               PARMS_TO_STORE+=" '$2'"; shift;;
+        --kernel-image)
+                       kernel_image_l="$2";            PARMS_TO_STORE+=" '$2'"; shift;;
         --) shift; break;;
 
         *)  # should not even reach this point
@@ -799,7 +821,7 @@ stdloglvl=$((stdloglvl + verbosity_mod_l))
 [[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
 [[ $lvmconf_l ]] && lvmconf=$lvmconf_l
 [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
-[[ $fw_dir ]] || fw_dir="/lib/firmware/updates /lib/firmware"
+[[ $fw_dir ]] || fw_dir="/lib/firmware/updates /lib/firmware /lib/firmware/$kernel"
 [[ $tmpdir_l ]] && tmpdir="$tmpdir_l"
 [[ $tmpdir ]] || tmpdir=/var/tmp
 [[ $INITRD_COMPRESS ]] && compress=$INITRD_COMPRESS
@@ -812,17 +834,36 @@ stdloglvl=$((stdloglvl + verbosity_mod_l))
 [[ $logfile_l ]] && logfile="$logfile_l"
 [[ $reproducible_l ]] && reproducible="$reproducible_l"
 [[ $loginstall_l ]] && loginstall="$loginstall_l"
+[[ $uefi_stub_l ]] && uefi_stub="$uefi_stub_l"
+[[ $kernel_image_l ]] && kernel_image="$kernel_image_l"
 
 # eliminate IFS hackery when messing with fw_dir
 fw_dir=${fw_dir//:/ }
 
+# check for logfile and try to create one if it doesn't exist
+if [[ -n "$logfile" ]];then
+    if [[ ! -f "$logfile" ]];then
+        touch "$logfile"
+        if [ ! $? -eq 0 ] ;then
+            printf "%s\n" "dracut: touch $logfile failed." >&2
+        fi
+    fi
+fi
+
 # handle compression options.
 [[ $compress ]] || compress="gzip"
 case $compress in
-    bzip2) compress="bzip2 -9";;
+    bzip2) compress="bzip2 -9";
+        command -v lbzip2 > /dev/null 2>&1 && compress="lbzip2 -9";;
     lzma)  compress="lzma -9 -T0";;
     xz)    compress="xz --check=crc32 --lzma2=dict=1MiB -T0";;
-    gzip)  compress="gzip -n -9 --rsyncable"; command -v pigz > /dev/null 2>&1 && compress="pigz -9 -n -T -R";;
+    gzip)  compress="gzip -n -9";
+        if command -v pigz > /dev/null 2>&1; then
+            compress="pigz -9 -n -T -R"
+        elif command -v gzip --help 2>&1 | grep -q rsyncable; then
+            compress="gzip -n -9 --rsyncable"
+        fi
+        ;;
     lzo)   compress="lzop -9";;
     lz4)   compress="lz4 -l -9";;
 esac
@@ -854,6 +895,7 @@ trap '
     ret=$?;
     [[ $keep ]] && echo "Not removing $initdir." >&2 || { [[ $initdir ]] && rm -rf -- "$initdir"; };
     [[ $keep ]] && echo "Not removing $early_cpio_dir." >&2 || { [[ $early_cpio_dir ]] && rm -Rf -- "$early_cpio_dir"; };
+    [[ $keep ]] && echo "Not removing $uefi_outdir." >&2 || { [[ $uefi_outdir ]] && rm -Rf -- "$uefi_outdir"; };
     [[ $_dlogdir ]] && rm -Rf -- "$_dlogdir";
     exit $ret;
     ' EXIT
@@ -893,7 +935,7 @@ if ! [[ $print_cmdline ]]; then
     rm -fr -- ${initdir}/*
 fi
 
-# Verify bash version, current minimum is 3.1
+# Verify bash version, current minimum is 4
 if (( BASH_VERSINFO[0] < 4 )); then
     dfatal 'You need at least Bash 4 to use dracut, sorry.'
     exit 1
@@ -1005,6 +1047,48 @@ if [[ ! $print_cmdline ]]; then
         fi
         loginstall=$(readlink -f "$loginstall")
     fi
+
+    if [[ $uefi = yes ]]; then
+        if ! command -v objcopy &>/dev/null; then
+            dfatal "Need 'objcopy' to create a UEFI executable"
+            exit 1
+        fi
+        unset EFI_MACHINE_TYPE_NAME
+        case $(arch) in
+            x86_64)
+                EFI_MACHINE_TYPE_NAME=x64;;
+            ia32)
+                EFI_MACHINE_TYPE_NAME=ia32;;
+            *)
+                dfatal "Architecture '$(arch)' not supported to create a UEFI executable"
+                exit 1
+                ;;
+        esac
+
+        if ! [[ -s $uefi_stub ]]; then
+            for uefi_stub in \
+                "/lib/systemd/boot/efi/linux${EFI_MACHINE_TYPE_NAME}.efi.stub" \
+                    "/usr/lib/gummiboot/linux${EFI_MACHINE_TYPE_NAME}.efi.stub"; do
+                [[ -s $uefi_stub ]] || continue
+                break
+            done
+        fi
+        if ! [[ -s $uefi_stub ]]; then
+            dfatal "Can't find a uefi stub '$uefi_stub' to create a UEFI executable"
+            exit 1
+        fi
+
+        if ! [[ $kernel_image ]]; then
+            for kernel_image in "/lib/modules/$kernel/vmlinuz" "/boot/vmlinuz-$kernel"; do
+                [[ -s "$kernel_image" ]] || continue
+                break
+            done
+        fi
+        if ! [[ -s $kernel_image ]]; then
+            dfatal "Can't find a kernel image '$kernel_image' to create a UEFI executable"
+            exit 1
+        fi
+    fi
 fi
 
 if [[ $acpi_override = yes ]] && ! check_kernel_config CONFIG_ACPI_INITRD_TABLE_OVERRIDE; then
@@ -1045,26 +1129,42 @@ declare -A host_fs_types
 
 for line in "${fstab_lines[@]}"; do
     set -- $line
+    dev="$1"
     #dev mp fs fsopts
-    push host_devs "$1"
-    host_fs_types["$1"]="$3"
+    case "$dev" in
+        UUID=*)
+            dev=$(blkid -l -t UUID=${dev#UUID=} -o device)
+            ;;
+        LABEL=*)
+            dev=$(blkid -l -t LABEL=${dev#LABEL=} -o device)
+            ;;
+        PARTUUID=*)
+            dev=$(blkid -l -t PARTUUID=${dev#PARTUUID=} -o device)
+            ;;
+        PARTLABEL=*)
+            dev=$(blkid -l -t PARTLABEL=${dev#PARTLABEL=} -o device)
+            ;;
+    esac
+    [ -z "$dev" ] && dwarn "Bad fstab entry $@" && continue
+    push_host_devs "$dev"
+    host_fs_types["$dev"]="$3"
 done
 
 for f in $add_fstab; do
     [[ -e $f ]] || continue
-    while read dev rest; do
-        push host_devs "$dev"
+    while read dev rest || [ -n "$dev" ]; do
+        push_host_devs "$dev"
     done < "$f"
 done
 
 for dev in $add_device; do
-    push host_devs "$dev"
+    push_host_devs "$dev"
 done
 
 if (( ${#add_device_l[@]} )); then
     while pop add_device_l val; do
         add_device+=" $val "
-        push host_devs "$val"
+        push_host_devs "$val"
     done
 fi
 
@@ -1093,17 +1193,17 @@ if [[ $hostonly ]]; then
         _dev=$(find_block_device "$mp")
         _bdev=$(readlink -f "/dev/block/$_dev")
         [[ -b $_bdev ]] && _dev=$_bdev
-        push host_devs $_dev
+        push_host_devs $_dev
         [[ "$mp" == "/" ]] && root_dev="$_dev"
-        push host_devs "$_dev"
+        push_host_devs "$_dev"
     done
 
     if [[ -f /proc/swaps ]] && [[ -f /etc/fstab ]]; then
-        while read dev type rest; do
+        while read dev type rest || [ -n "$dev" ]; do
             [[ -b $dev ]] || continue
             [[ "$type" == "partition" ]] || continue
 
-            while read _d _m _t _o _r; do
+            while read _d _m _t _o _r || [ -n "$_d" ]; do
                 [[ "$_d" == \#* ]] && continue
                 [[ $_d ]] || continue
                 [[ $_t != "swap" ]] && continue
@@ -1113,7 +1213,7 @@ if [[ $hostonly ]]; then
                 [[ "$_d" -ef "$dev" ]] || continue
 
                 if [[ -f /etc/crypttab ]]; then
-                    while read _mapper _a _p _o; do
+                    while read _mapper _a _p _o || [ -n "$_mapper" ]; do
                         [[ $_mapper = \#* ]] && continue
                         [[ "$_d" -ef /dev/mapper/"$_mapper" ]] || continue
                         [[ "$_o" ]] || _o="$_p"
@@ -1124,7 +1224,9 @@ if [[ $hostonly ]]; then
                     done < /etc/crypttab
                 fi
 
-                push host_devs "$(readlink -f "$dev")"
+                _dev="$(readlink -f "$dev")"
+                push_host_devs "$_dev"
+                push swap_devs "$_dev"
                 break
             done < /etc/fstab
         done < /proc/swaps
@@ -1132,8 +1234,8 @@ if [[ $hostonly ]]; then
     # record all host modaliases
     declare -A host_modalias
     find  /sys/devices/ -name uevent -print > "$initdir/.modalias"
-    while read m; do
-        while read line; do
+    while read m || [ -n "$m" ]; do
+        while read line || [ -n "$line" ]; do
             [[ "$line" != MODALIAS\=* ]] && continue
             modalias="${line##MODALIAS=}" && [[ $modalias ]] && host_modalias["$modalias"]=1
             break
@@ -1142,14 +1244,14 @@ if [[ $hostonly ]]; then
 
     rm -f -- "$initdir/.modalias"
 
-    while read _k _s _v; do
+    while read _k _s _v || [ -n "$_k" ]; do
         [ "$_k" != "name" -a "$_k" != "driver" ] && continue
         host_modalias["$_v"]=1
     done </proc/crypto
 
     # check /proc/modules
     declare -A host_modules
-    while read m rest; do
+    while read m rest || [ -n "$m" ]; do
         host_modules["$m"]=1
     done </proc/modules
 fi
@@ -1189,7 +1291,7 @@ for dev in "${!host_fs_types[@]}"; do
     fi
     if [[ $journaldev ]]; then
         dev="$(readlink -f "$dev")"
-        push host_devs "$dev"
+        push_host_devs "$dev"
         _get_fs_type "$dev"
         check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")"
     fi
@@ -1220,15 +1322,26 @@ fi
 
 [[ -d "$systemdsystemconfdir" ]] || systemdsystemconfdir=/etc/systemd/system
 
-export initdir dracutbasedir dracutmodules \
+[[ -d $tmpfilesdir ]] \
+    || tmpfilesdir=$(pkg-config systemd --variable=tmpfilesdir 2>/dev/null)
+
+if ! [[ -d "$tmpfilesdir" ]]; then
+    [[ -f /lib/tmpfiles.d ]] && tmpfilesdir=/lib/tmpfiles.d
+    [[ -f /usr/lib/tmpfiles.d ]] && tmpfilesdir=/usr/lib/tmpfiles.d
+fi
+
+export initdir dracutbasedir \
+    dracutmodules force_add_dracutmodules add_dracutmodules omit_dracutmodules \
+    mods_to_load \
     fw_dir drivers_dir debug no_kernel kernel_only \
     omit_drivers mdadmconf lvmconf root_dev \
     use_fstab fstab_lines libdirs fscks nofscks ro_mnt \
     stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \
-    debug host_fs_types host_devs sshkey add_fstab \
+    debug host_fs_types host_devs swap_devs sshkey add_fstab \
     DRACUT_VERSION udevdir prefix filesystems drivers \
     systemdutildir systemdsystemunitdir systemdsystemconfdir \
-    host_modalias host_modules hostonly_cmdline loginstall
+    host_modalias host_modules hostonly_cmdline loginstall \
+    tmpfilesdir
 
 mods_to_load=""
 # check all our modules to see if they should be sourced.
@@ -1238,14 +1351,24 @@ for_each_module_dir check_mount
 
 dracut_module_included "fips" && export DRACUT_FIPS_MODE=1
 
-if [[ $print_cmdline ]]; then
-    modules_loaded=" "
+do_print_cmdline()
+{
+    local -A _mods_to_print
+    for i in $modules_loaded $mods_to_load; do
+        _mods_to_print[$i]=1
+    done
+
     # source our modules.
     for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
         _d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]}
+        [[ ${_mods_to_print[$_d_mod]} ]] || continue
         module_cmdline "$_d_mod"
     done
     unset moddir
+}
+
+if [[ $print_cmdline ]]; then
+    do_print_cmdline
     printf "\n"
     exit 0
 fi
@@ -1264,7 +1387,7 @@ if [[ $prefix ]]; then
 fi
 
 if [[ $kernel_only != yes ]]; then
-    for d in usr/bin usr/sbin bin etc lib sbin tmp usr var $libdirs; do
+    for d in usr/bin usr/sbin bin etc lib sbin tmp usr var var/tmp $libdirs; do
         [[ -e "${initdir}${prefix}/$d" ]] && continue
         if [ -L "/$d" ]; then
             inst_symlink "/$d" "${prefix}/$d"
@@ -1283,7 +1406,6 @@ if [[ $kernel_only != yes ]]; then
 
     ln -sfn ../run "$initdir/var/run"
     ln -sfn ../run/lock "$initdir/var/lock"
-    ln -sfn ../run/log "$initdir/var/log"
 else
     for d in lib "$libdir"; do
         [[ -e "${initdir}${prefix}/$d" ]] && continue
@@ -1312,36 +1434,35 @@ modules_loaded=" "
 # source our modules.
 for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
     _d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]}
-    if [[ "$mods_to_load" == *\ $_d_mod\ * ]]; then
-        if [[ $show_modules = yes ]]; then
-            printf "%s\n" "$_d_mod"
-        else
-            dinfo "*** Including module: $_d_mod ***"
-        fi
-        if [[ $kernel_only == yes ]]; then
+    [[ "$mods_to_load" == *\ $_d_mod\ * ]] || continue
+    if [[ $show_modules = yes ]]; then
+        printf "%s\n" "$_d_mod"
+    else
+        dinfo "*** Including module: $_d_mod ***"
+    fi
+    if [[ $kernel_only == yes ]]; then
+        module_installkernel "$_d_mod" || {
+            dfatal "installkernel failed in module $_d_mod"
+            exit 1
+        }
+    else
+        module_install "$_d_mod"
+        if [[ $no_kernel != yes ]]; then
             module_installkernel "$_d_mod" || {
                 dfatal "installkernel failed in module $_d_mod"
                 exit 1
             }
-        else
-            module_install "$_d_mod"
-            if [[ $no_kernel != yes ]]; then
-                module_installkernel "$_d_mod" || {
-                    dfatal "installkernel failed in module $_d_mod"
-                    exit 1
-                }
-            fi
         fi
-        mods_to_load=${mods_to_load// $_d_mod /}
-        modules_loaded+="$_d_mod "
+    fi
+    mods_to_load=${mods_to_load// $_d_mod /}
+    modules_loaded+="$_d_mod "
 
-        #print the module install size
-        if [ -n "$printsize" ]; then
-            _isize_new=$(du -sk ${initdir}|cut -f1)
-            _isize_delta=$((_isize_new - _isize))
-            printf "%s\n" "$_d_mod install size: ${_isize_delta}k"
-            _isize=$_isize_new
-        fi
+    #print the module install size
+    if [ -n "$printsize" ]; then
+        _isize_new=$(du -sk ${initdir}|cut -f1)
+        _isize_delta=$((_isize_new - _isize))
+        printf "%s\n" "$_d_mod install size: ${_isize_delta}k"
+        _isize=$_isize_new
     fi
 done
 unset moddir
@@ -1400,6 +1521,7 @@ if [[ $kernel_only != yes ]]; then
         [ -z "${line[3]}" ] && line[3]="defaults"
         [ -z "${line[4]}" ] && line[4]="0"
         [ -z "${line[5]}" ] && line[5]="2"
+        strstr "${line[2]}" "nfs" && line[5]="0"
         echo "${line[@]}" >> "${initdir}/etc/fstab"
     done
 
@@ -1418,9 +1540,7 @@ if [[ $kernel_only != yes ]]; then
 
     if [[ $DRACUT_RESOLVE_LAZY ]] && [[ $DRACUT_INSTALL ]]; then
         dinfo "*** Resolving executable dependencies ***"
-        find "$initdir" -type f \
-            '(' -perm -0100 -or -perm -0010 -or -perm -0001 ')' \
-            -not -path '*.ko' -print0 \
+        find "$initdir" -type f -perm /0111 -not -path '*.ko' -print0 \
         | xargs -r -0 $DRACUT_INSTALL ${initdir:+-D "$initdir"} -R ${DRACUT_FIPS_MODE:+-H} --
         dinfo "*** Resolving executable dependencies done***"
     fi
@@ -1435,26 +1555,29 @@ if [[ $kernel_only != yes ]]; then
     done
 fi
 
-while pop include_src src && pop include_target tgt; do
-    if [[ $src && $tgt ]]; then
+while pop include_src src && pop include_target target; do
+    if [[ $src && $target ]]; then
         if [[ -f $src ]]; then
-            inst $src $tgt
+            inst $src $target
         else
             ddebug "Including directory: $src"
-            mkdir -p "${initdir}/${tgt}"
+            destdir="${initdir}/${target}"
+            mkdir -p "$destdir"
             # check for preexisting symlinks, so we can cope with the
             # symlinks to $prefix
-            for i in "$src"/*; do
-                [[ -e "$i" || -h "$i" ]] || continue
-                s=${initdir}/${tgt}/${i#$src/}
-                if [[ -d "$i" ]]; then
-                    if ! [[ -e "$s" ]]; then
-                        mkdir -m 0755 -p "$s"
-                        chmod --reference="$i" "$s"
+            # Objectname is a file or a directory
+            for objectname in "$src"/*; do
+                [[ -e "$objectname" || -h "$objectname" ]] || continue
+                if [[ -d "$objectname" ]]; then
+                    # objectname is a directory, let's compute the final directory name
+                    object_destdir=${destdir}/${objectname#$src/}
+                    if ! [[ -e "$object_destdir" ]]; then
+                        mkdir -m 0755 -p "$object_destdir"
+                        chmod --reference="$objectname" "$object_destdir"
                     fi
-                    cp --reflink=auto --sparse=auto -fa -t "$s" "$i"/*
+                    cp --reflink=auto --sparse=auto -fa -t "$object_destdir" "$objectname"/*
                 else
-                    cp --reflink=auto --sparse=auto -fa -t "$s" "$i"
+                    cp --reflink=auto --sparse=auto -fa -t "$destdir" "$objectname"
                 fi
             done
         fi
@@ -1514,7 +1637,7 @@ if [[ $do_strip = yes ]] && ! [[ $DRACUT_FIPS_MODE ]]; then
 
     # strip kernel modules, but do not touch signed modules
     find "$initdir" -type f -path '*/lib/modules/*.ko' -print0 \
-        | while read -r -d $'\0' f; do
+        | while read -r -d $'\0' f || [ -n "$f" ]; do
         SIG=$(tail -c 28 "$f")
         [[ $SIG == '~Module signature appended~' ]] || { printf "%s\000" "$f"; }
     done | xargs -r -0 strip -g
@@ -1568,8 +1691,29 @@ if ! ( echo $PARMS_TO_STORE > $initdir/lib/dracut/build-parameter.txt ); then
     exit 1
 fi
 
+if [[ $hostonly_cmdline ]] ; then
+    unset _stored_cmdline
+    if [ -d $initdir/etc/cmdline.d ];then
+        dinfo "Stored kernel commandline:"
+        for conf in $initdir/etc/cmdline.d/*.conf ; do
+            [ -e "$conf" ] || continue
+            dinfo "$(< $conf)"
+            _stored_cmdline=1
+        done
+    fi
+    if ! [[ $_stored_cmdline ]]; then
+        dinfo "No dracut internal kernel commandline stored in initrd"
+    fi
+fi
 rm -f -- "$outfile"
-dinfo "*** Creating image file ***"
+dinfo "*** Creating image file '$outfile' ***"
+
+if [[ $uefi = yes ]]; then
+    uefi_outfile="$outfile"
+    readonly uefi_outdir="$(mktemp --tmpdir="$TMPDIR/" -d -t initrd.XXXXXX)"
+    # redirect initrd output
+    outfile="$uefi_outdir/initrd"
+fi
 
 if [[ $DRACUT_REPRODUCIBLE ]]; then
     find "$initdir" -newer "$dracutbasedir/dracut-functions.sh" -print0 \
@@ -1605,7 +1749,7 @@ if ! (
     dfatal "dracut: creation of $outfile failed"
     exit 1
 fi
-dinfo "*** Creating image file done ***"
+dinfo "*** Creating initrd image file '$outfile' done ***"
 
 if (( maxloglvl >= 5 )); then
     if [[ $allowlocal ]]; then
@@ -1615,4 +1759,32 @@ if (( maxloglvl >= 5 )); then
     fi
 fi
 
+if [[ $uefi = yes ]]; then
+    if [[ $kernel_cmdline ]]; then
+        echo -n "$kernel_cmdline" > "$uefi_outdir/cmdline.txt"
+    elif [[ $hostonly_cmdline = yes ]] && [ -d $initdir/etc/cmdline.d ];then
+        for conf in $initdir/etc/cmdline.d/*.conf ; do
+            [ -e "$conf" ] || continue
+            printf "%s " "$(< $conf)" >> "$uefi_outdir/cmdline.txt"
+        done
+    else
+        do_print_cmdline > "$uefi_outdir/cmdline.txt"
+    fi
+    echo -ne "\x00" >> "$uefi_outdir/cmdline.txt"
+
+    dinfo "Using UEFI kernel cmdline:"
+    dinfo $(< "$uefi_outdir/cmdline.txt")
+
+    [[ -s /usr/lib/os-release ]] && uefi_osrelease="/usr/lib/os-release"
+    [[ -s /etc/os-release ]] && uefi_osrelease="/etc/os-release"
+
+    objcopy \
+        ${uefi_osrelease:+--add-section .osrel=$uefi_osrelease --change-section-vma .osrel=0x20000} \
+        --add-section .cmdline="$uefi_outdir/cmdline.txt" --change-section-vma .cmdline=0x30000 \
+        --add-section .linux="$kernel_image" --change-section-vma .linux=0x40000 \
+        --add-section .initrd="$outfile" --change-section-vma .initrd=0x3000000 \
+        "$uefi_stub" "$uefi_outfile"
+    dinfo "*** Creating UEFI image file '$uefi_outfile' done ***"
+fi
+
 exit 0

dracut.spec

@@ -195,20 +195,9 @@ Requires: %{name} = %{version}-%{release}
 This package contains tools to assemble the local initrd and host configuration.
 
 %prep
-%setup -q -n %{name}-%{version}
+%autosetup -n %{name}-%{version} -S git_am
 cp %{SOURCE1} .
 
-%if %{defined PATCH1}
-git init
-git config user.email "dracut-maint@redhat.com"
-git config user.name "Fedora dracut team"
-git add .
-git commit -a -q -m "%{version} baseline."
-
-# Apply all the patches.
-git am -p1 %{patches}
-%endif
-
 %build
 %configure --systemdsystemunitdir=%{_unitdir} --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) --libdir=%{_prefix}/lib \
 %if %{without doc}
@@ -286,10 +275,6 @@ echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/
 > $RPM_BUILD_ROOT/etc/system-fips
 %endif
 
-# create compat symlink
-mkdir -p $RPM_BUILD_ROOT%{_sbindir}
-ln -sr $RPM_BUILD_ROOT%{_bindir}/dracut $RPM_BUILD_ROOT%{_sbindir}/dracut
-
 %clean
 rm -rf -- $RPM_BUILD_ROOT
 
@@ -301,8 +286,6 @@ rm -rf -- $RPM_BUILD_ROOT
 %{!?_licensedir:%global license %%doc}
 %license COPYING lgpl-2.1.txt
 %{_bindir}/dracut
-# compat symlink
-%{_sbindir}/dracut
 %{_datadir}/bash-completion/completions/dracut
 %{_datadir}/bash-completion/completions/lsinitrd
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
@@ -324,6 +307,7 @@ rm -rf -- $RPM_BUILD_ROOT
 %endif
 %dir %{_sysconfdir}/dracut.conf.d
 %dir %{dracutlibdir}/dracut.conf.d
+%{_datadir}/pkgconfig/dracut.pc
 
 %if %{with doc}
 %{_mandir}/man8/dracut.8*
@@ -345,6 +329,8 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/00bootchart
 %endif
 %{dracutlibdir}/modules.d/00bash
+%{dracutlibdir}/modules.d/00systemd
+%{dracutlibdir}/modules.d/01systemd-initrd
 %{dracutlibdir}/modules.d/03modsign
 %{dracutlibdir}/modules.d/03rescue
 %{dracutlibdir}/modules.d/04watchdog
@@ -389,7 +375,7 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/98pollcdrom
 %{dracutlibdir}/modules.d/98selinux
 %{dracutlibdir}/modules.d/98syslog
-%{dracutlibdir}/modules.d/98systemd
+%{dracutlibdir}/modules.d/98dracut-systemd
 %{dracutlibdir}/modules.d/98usrmount
 %{dracutlibdir}/modules.d/99base
 %{dracutlibdir}/modules.d/99fs-lib
@@ -422,7 +408,9 @@ rm -rf -- $RPM_BUILD_ROOT
 
 %files network
 %defattr(-,root,root,0755)
+%{dracutlibdir}/modules.d/02systemd-networkd
 %{dracutlibdir}/modules.d/40network
+%{dracutlibdir}/modules.d/90kernel-network-modules
 %{dracutlibdir}/modules.d/95fcoe
 %{dracutlibdir}/modules.d/95iscsi
 %{dracutlibdir}/modules.d/90livenet

dracut.usage.asc

@@ -246,23 +246,6 @@ specified multiple times.
 If your root partition is on a network drive, you have to have the network
 dracut modules installed to create a network aware initramfs image.
 
-On a Red Hat Enterprise Linux or Fedora system, this means, you have to install
-the _dracut-network_ rpm package:
-
-
-----
-# yum install dracut-network
-----
-
-The resulting initramfs image can be served by a boot manager residing on your
-local hard drive or it can be served by a PXE/TFTP server.
-
-How to setup your PXE/TFTP server can be found in the
-http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
-Hat Enterprise Linux 6 Storage Administration Guide]
-or http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
-Hat Enterprise Linux 7 Storage Administration Guide].
-
 If you specify ip=dhcp on the kernel command line, then dracut asks a dhcp
 server about the ip adress for the machine. The dhcp server can also serve an
 additional root-path, which will set the root device for dracut. With this
@@ -302,7 +285,7 @@ This will reduce the size of the initramfs image significantly.
 If the boot process does not succeed, you have several options to debug the
 situation. Some of the basic operations are covered here. For more information
 you should also visit:
-http://fedoraproject.org/wiki/How_to_debug_Dracut_problems
+https://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html
 
 
 [[identifying-your-problem-area]]

install/dracut-install.c

@@ -222,7 +222,7 @@ static int cp(const char *src, const char *dst)
                 if (ret == 0) {
                         struct timeval tv[2];
                         if (fchown(dest_desc, sb.st_uid, sb.st_gid) != 0)
-                                if(fchown(dest_desc, (__uid_t) - 1, sb.st_gid) != 0)
+                                if(fchown(dest_desc, (uid_t) - 1, sb.st_gid) != 0)
                                     log_error("Failed to chown %s: %m", dst);
                         tv[0].tv_sec = sb.st_atime;
                         tv[0].tv_usec = 0;
@@ -388,6 +388,11 @@ static int resolve_deps(const char *src)
                         break;
                 }
 
+		/* musl ldd */
+		if (strstr(buf, "Not a valid dynamic program"))
+			break;
+
+		/* glibc */
                 if (strstr(buf, "not a dynamic executable"))
                         break;
 

install/util.h

@@ -20,6 +20,8 @@
   along with systemd; If not, see <http://www.gnu.org/licenses/>.
 ***/
 
+#define _GNU_SOURCE
+
 #include <inttypes.h>
 #include <time.h>
 #include <sys/time.h>
@@ -27,6 +29,7 @@
 #include <stdbool.h>
 #include <stdlib.h>
 #include <stdio.h>
+#include <string.h>
 #include <signal.h>
 #include <sched.h>
 #include <limits.h>

lsinitrd.sh

@@ -108,6 +108,12 @@ if ! [[ -f "$image" ]]; then
     exit 1
 fi
 
+dracutlibdirs() {
+    for d in lib64/dracut lib/dracut usr/lib64/dracut usr/lib/dracut; do
+        echo "$d/$1"
+    done
+}
+
 extract_files()
 {
     (( ${#filenames[@]} == 1 )) && nofileinfo=1
@@ -124,7 +130,8 @@ extract_files()
 list_modules()
 {
     echo "dracut modules:"
-    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/modules.txt' 'usr/lib/dracut/modules.txt' 2>/dev/null
+    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+        $(dracutlibdirs modules.txt) 2>/dev/null
     ((ret+=$?))
 }
 
@@ -142,7 +149,7 @@ list_files()
 
 
 if (( ${#filenames[@]} <= 0 )); then
-    echo "Image: $image: $(du -h $image | while read a b; do echo $a;done)"
+    echo "Image: $image: $(du -h $image | while read a b || [ -n "$a" ]; do echo $a;done)"
     echo "========================================================================"
 fi
 
@@ -217,7 +224,8 @@ ret=0
 if (( ${#filenames[@]} > 0 )); then
     extract_files
 else
-    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/dracut-*' 'usr/lib/dracut/dracut-*' 2>/dev/null)
+    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+        $(dracutlibdirs 'dracut-*') 2>/dev/null)
     ((ret+=$?))
     echo "Version: $version"
     echo
@@ -226,7 +234,8 @@ else
         echo "========================================================================"
     else
         echo -n "Arguments: "
-        $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/build-parameter.txt' 'usr/lib/dracut/build-parameter.txt' 2>/dev/null
+        $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+            $(dracutlibdirs build-parameter.txt) 2>/dev/null
         echo
         list_modules
         list_files

mkinitrd-suse.8.asc

@@ -76,7 +76,9 @@ OPTIONS
 
 **-A**::
     Create a so called "monster initrd" which includes all available
-    features and modules.
+    features and modules. This calls dracut with --no-hostonly and
+    --no-hostonly-cmdline parameters internally, instead of the default
+    --hostonly and --hostonly-cmdline.
 
 **-v, --verbose**::
     increase verbosity level
@@ -85,9 +87,6 @@ OPTIONS
     Disable logging to _/var/log/YaST2/mkinitrd.log_. This is useful for
     testing if you don’t want to clutter the system log.
 
-**--force**::
-    overwrite existing initramfs file.
-
 **--help**::
     print a help message and exit.
 

mkinitrd-suse.sh

@@ -20,8 +20,6 @@
 
 boot_dir="/boot"
 quiet=0
-host_only=1
-force=0
 logfile=/var/log/YaST2/mkinitrd.log
 dracut_cmd=dracut
 
@@ -68,10 +66,7 @@ usage () {
     $cmd "	-j device		Journal device"
     $cmd "	-D interface		Run dhcp on the specified interface."
     $cmd "	-I interface		Configure the specified interface statically."
-    $cmd "	-a acpi_dsdt		Attach compiled ACPI DSDT (Differentiated"
-    $cmd "				System Description Table) to initrd. This"
-    $cmd "				replaces the DSDT of the BIOS. Defaults to"
-    $cmd "				the ACPI_DSDT variable in /etc/sysconfig/kernel."
+    $cmd "	-a acpi_dsdt		Obsolete, do not use."
     $cmd "	-s size			Add splash animation and bootscreen to initrd."
 
     [[ $1 = '-n' ]] && exit 0
@@ -204,8 +199,6 @@ default_kernel_images() {
     for initrd_image in $initrd_images;do
 	targets="$targets $initrd_image"
     done
-    host_only=1
-    force=1
 }
 
 while (($# > 0)); do
@@ -218,8 +211,6 @@ while (($# > 0)); do
 	    for kernel_image in $kernel_images;do
 		kernels="$kernels ${kernel_image#*-}"
 	    done
-	    host_only=1
-	    force=1
 	    ;;
 	-i) read_arg initrd_images "$@" || shift $?
 	    for initrd_image in $initrd_images;do
@@ -261,7 +252,7 @@ while (($# > 0)); do
 	    dracut_cmdline="${dracut_cmdline} ip=$(ipconfig $static_if)":
 	    ;;
 	-a) read_arg acpi_dsdt "$@" || shift $?
-	    echo "mkinitrd: custom DSDT not yet supported"
+	    echo "Obsolete -a param, use acpi_table_dir= and acpi_override= variables in /etc/dracut.conf.d/"
 	    exit 1
 	    ;;
 	-s) read_arg boot_splash "$@" || shift $?
@@ -275,7 +266,6 @@ while (($# > 0)); do
         --version|-R)
             echo "mkinitrd: dracut compatibility wrapper"
             exit 0;;
-        --force) force=1;;
 	--quiet|-q) quiet=1;;
         *)  if [[ ! $targets ]]; then
             targets=$1
@@ -289,15 +279,17 @@ while (($# > 0)); do
 done
 
 [[ $targets && $kernels ]] || default_kernel_images
-[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage)
+if [[ ! $targets || ! $kernels ]];then
+    error "No kernel found in $boot_dir"
+fi
 
 # We can have several targets/kernels, transform the list to an array
 targets=( $targets )
 [[ $kernels ]] && kernels=( $kernels )
 
 [[ $logfile ]]        && dracut_args="${dracut_args} --logfile $logfile"
-[[ $host_only == 1 ]] && dracut_args="${dracut_args} --hostonly"
-[[ $force == 1 ]]     && dracut_args="${dracut_args} --force"
+dracut_args="${dracut_args} --force"
+
 [[ $dracut_cmdline ]] && dracut_args="${dracut_args} --kernel-cmdline ${dracut_cmdline}"
 [ -z "$(type -p update-bootloader)" ] && skip_update_bootloader=1
 
@@ -306,11 +298,9 @@ if [ -f /etc/sysconfig/kernel ] ; then
     . /etc/sysconfig/kernel
 fi
 [[ $module_list ]] || module_list="${INITRD_MODULES}"
-basicmodules="$basicmodules ${module_list}"
 [[ $domu_module_list ]] || domu_module_list="${DOMU_INITRD_MODULES}"
-[[ $acpi_dsdt ]] || acpi_dsdt="${ACPI_DSDT}"
+shopt -s extglob
 
-echo "Creating: target|kernel|dracut args|basicmodules "
 for ((i=0 ; $i<${#targets[@]} ; i++)); do
 
     if [[ $img_vers ]];then
@@ -320,28 +310,34 @@ for ((i=0 ; $i<${#targets[@]} ; i++)); do
     fi
     kernel="${kernels[$i]}"
 
+    if is_xen_kernel $kernel $rootfs ; then
+	modules_all="${module_list} ${domu_module_list}"
+    else
+        modules_all="${module_list}"
+    fi
+
+    # Remove leading and trailing spaces needs (set above): shopt -s extglob
+    modules_all=${modules_all%%+([[:space:]])}
+    modules_all=${modules_all##+([[:space:]])}
+
+    echo "Creating initrd: $target"
+
     # Duplicate code: No way found how to redirect output based on $quiet
     if [[ $quiet == 1 ]];then
-	echo "$target|$kernel|$dracut_args|$basicmodules"
-	if is_xen_kernel $kernel $rootfs ; then
-	    basicmodules="$basicmodules ${domu_module_list}"
-	fi
-	if [[ $basicmodules ]]; then
-            $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \
-		"$kernel" &>/dev/null
-	else
+        # Duplicate code: --force-drivers must not be called with empty string
+        # -> dracut bug workarounded ugly, because of complex whitespace
+        # expansion magics
+        if [ -n "${modules_all}" ];then
+            $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel" &>/dev/null
+        else
             $dracut_cmd $dracut_args "$target" "$kernel" &>/dev/null
-	fi
+        fi
     else
-	if is_xen_kernel $kernel $rootfs ; then
-	    basicmodules="$basicmodules ${domu_module_list}"
-	fi
-	if [[ $basicmodules ]]; then
-            $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \
-		"$kernel"
-	else
+        if [ -n "${modules_all}" ];then
+            $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel"
+        else
             $dracut_cmd $dracut_args "$target" "$kernel"
-	fi
+        fi
     fi
 done
 

modules.d/00systemd/module-setup.sh

@@ -18,7 +18,7 @@ depends() {
 }
 
 installkernel() {
-    instmods autofs4 ipv6
+    hostonly='' instmods autofs4 ipv6
     instmods -s efivarfs
 }
 
@@ -51,14 +51,14 @@ install() {
         $systemdsystemunitdir/basic.target \
         $systemdsystemunitdir/halt.target \
         $systemdsystemunitdir/kexec.target \
-        $systemdsystemunitdir/initrd.target \
-        $systemdsystemunitdir/initrd-fs.target \
-        $systemdsystemunitdir/initrd-root-fs.target \
         $systemdsystemunitdir/local-fs.target \
         $systemdsystemunitdir/local-fs-pre.target \
         $systemdsystemunitdir/remote-fs.target \
         $systemdsystemunitdir/remote-fs-pre.target \
+        $systemdsystemunitdir/multi-user.target \
         $systemdsystemunitdir/network.target \
+        $systemdsystemunitdir/network-pre.target \
+        $systemdsystemunitdir/network-online.target \
         $systemdsystemunitdir/nss-lookup.target \
         $systemdsystemunitdir/nss-user-lookup.target \
         $systemdsystemunitdir/poweroff.target \
@@ -83,6 +83,7 @@ install() {
         $systemdsystemunitdir/systemd-udevd-kernel.socket \
         $systemdsystemunitdir/systemd-ask-password-plymouth.path \
         $systemdsystemunitdir/systemd-journald.socket \
+        $systemdsystemunitdir/systemd-journald-audit.socket \
         $systemdsystemunitdir/systemd-ask-password-console.service \
         $systemdsystemunitdir/systemd-modules-load.service \
         $systemdsystemunitdir/systemd-halt.service \
@@ -97,6 +98,7 @@ install() {
         $systemdsystemunitdir/systemd-journald.service \
         $systemdsystemunitdir/systemd-vconsole-setup.service \
         $systemdsystemunitdir/systemd-random-seed-load.service \
+        $systemdsystemunitdir/systemd-random-seed.service \
         $systemdsystemunitdir/systemd-sysctl.service \
         \
         $systemdsystemunitdir/sysinit.target.wants/systemd-modules-load.service \
@@ -105,6 +107,7 @@ install() {
         $systemdsystemunitdir/sockets.target.wants/systemd-udevd-control.socket \
         $systemdsystemunitdir/sockets.target.wants/systemd-udevd-kernel.socket \
         $systemdsystemunitdir/sockets.target.wants/systemd-journald.socket \
+        $systemdsystemunitdir/sockets.target.wants/systemd-journald-audit.socket \
         $systemdsystemunitdir/sockets.target.wants/systemd-journald-dev-log.socket \
         $systemdsystemunitdir/sysinit.target.wants/systemd-udevd.service \
         $systemdsystemunitdir/sysinit.target.wants/systemd-udev-trigger.service \
@@ -113,17 +116,20 @@ install() {
         $systemdsystemunitdir/sysinit.target.wants/systemd-sysctl.service \
         \
         $systemdsystemunitdir/ctrl-alt-del.target \
+        $systemdsystemunitdir/reboot.target \
+        $systemdsystemunitdir/systemd-reboot.service \
         $systemdsystemunitdir/syslog.socket \
-        $systemdsystemunitdir/initrd-switch-root.target \
-        $systemdsystemunitdir/initrd-switch-root.service \
-        $systemdsystemunitdir/initrd-cleanup.service \
-        $systemdsystemunitdir/initrd-udevadm-cleanup-db.service \
-        $systemdsystemunitdir/initrd-parse-etc.service \
         \
         $systemdsystemunitdir/slices.target \
         $systemdsystemunitdir/system.slice \
         \
-        journalctl systemctl echo swapoff systemd-cgls systemd-tmpfiles
+        $tmpfilesdir/systemd.conf \
+        \
+        journalctl systemctl \
+        echo swapoff \
+        kmod insmod rmmod modprobe modinfo depmod lsmod \
+        mount umount reboot poweroff \
+        systemd-cgls systemd-tmpfiles
 
     inst_multiple -o \
         /usr/lib/modules-load.d/*.conf \
@@ -133,7 +139,7 @@ install() {
         local _line i
         for i in "$1"/*.conf; do
             [[ -f $i ]] || continue
-            while read _line; do
+            while read _line || [ -n "$_line" ]; do
                 case $_line in
                     \#*)
                         ;;
@@ -171,39 +177,28 @@ install() {
 
     # install adm user/group for journald
     inst_multiple nologin
-    egrep '^systemd-journal:' "$initdir/etc/passwd" 2>/dev/null >> "$initdir/etc/passwd"
+    egrep '^systemd-journal:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    egrep '^adm:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
     egrep '^systemd-journal:' /etc/group >> "$initdir/etc/group"
+    egrep '^wheel:' /etc/group >> "$initdir/etc/group"
+    egrep '^adm:' /etc/group >> "$initdir/etc/group"
 
     ln_r $systemdutildir/systemd "/init"
     ln_r $systemdutildir/systemd "/sbin/init"
 
-    inst_script "$moddir/dracut-emergency.sh" /bin/dracut-emergency
-    inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/emergency.service
-    inst_simple "$moddir/dracut-emergency.service" ${systemdsystemunitdir}/dracut-emergency.service
-    inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/rescue.service
-
-    ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target"
-
-    inst_script "$moddir/dracut-cmdline.sh" /bin/dracut-cmdline
-    inst_script "$moddir/dracut-cmdline-ask.sh" /bin/dracut-cmdline-ask
-    inst_script "$moddir/dracut-pre-udev.sh" /bin/dracut-pre-udev
-    inst_script "$moddir/dracut-pre-trigger.sh" /bin/dracut-pre-trigger
-    inst_script "$moddir/dracut-initqueue.sh" /bin/dracut-initqueue
-    inst_script "$moddir/dracut-pre-mount.sh" /bin/dracut-pre-mount
-    inst_script "$moddir/dracut-mount.sh" /bin/dracut-mount
-    inst_script "$moddir/dracut-pre-pivot.sh" /bin/dracut-pre-pivot
-
-    inst_script "$moddir/rootfs-generator.sh" $systemdutildir/system-generators/dracut-rootfs-generator
-
     inst_binary true
     ln_r $(type -P true) "/usr/bin/loginctl"
     ln_r $(type -P true) "/bin/loginctl"
-    inst_rules 70-uaccess.rules 71-seat.rules 73-seat-late.rules 99-systemd.rules
+    inst_rules \
+        70-uaccess.rules \
+        71-seat.rules \
+        73-seat-late.rules \
+        90-vconsole.rules \
+        99-systemd.rules
 
     for i in \
         emergency.target \
-        dracut-emergency.service \
-        rescue.service \
+        rescue.target \
         systemd-ask-password-console.service \
         systemd-ask-password-plymouth.service \
         ; do
@@ -212,21 +207,6 @@ install() {
             "${systemdsystemunitdir}/${i}.wants/systemd-vconsole-setup.service"
     done
 
-    mkdir -p "${initdir}/$systemdsystemunitdir/initrd.target.wants"
-    for i in \
-        dracut-cmdline.service \
-        dracut-cmdline-ask.service \
-        dracut-initqueue.service \
-        dracut-mount.service \
-        dracut-pre-mount.service \
-        dracut-pre-pivot.service \
-        dracut-pre-trigger.service \
-        dracut-pre-udev.service \
-        ; do
-        inst_simple "$moddir/${i}" "$systemdsystemunitdir/${i}"
-        ln_r "$systemdsystemunitdir/${i}" "$systemdsystemunitdir/initrd.target.wants/${i}"
-    done
-
     mkdir -p "$initdir/etc/systemd"
     # turn off RateLimit for journal
     {
@@ -235,5 +215,6 @@ install() {
         echo "RateLimitBurst=0"
     } >> "$initdir/etc/systemd/journald.conf"
 
+    ln_r "${systemdsystemunitdir}/multi-user.target" "${systemdsystemunitdir}/default.target"
 }
 

modules.d/01fips/fips.sh

@@ -59,8 +59,8 @@ do_rhevh_check()
     kpath=${1}
 
     # If we're on RHEV-H, the kernel is in /run/initramfs/live/vmlinuz0
-    HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b; do printf "%s\n" $a; done)
-    HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b; do printf "%s\n" $a; done || return 1)
+    HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done)
+    HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done || return 1)
     if [ -z "$HMAC_SUM_ORIG" ] || [ -z "$HMAC_SUM_CALC" ] || [ "${HMAC_SUM_ORIG}" != "${HMAC_SUM_CALC}" ]; then
         warn "HMAC sum mismatch"
         return 1
@@ -92,7 +92,7 @@ do_fips()
             if ! modprobe "${_module}"; then
                 # check if kernel provides generic algo
                 _found=0
-                while read _k _s _v; do
+                while read _k _s _v || [ -n "$_k" ]; do
                     [ "$_k" != "name" -a "$_k" != "driver" ] && continue
                     [ "$_v" != "$_module" ] && continue
                     _found=1

modules.d/01fips/module-setup.sh

@@ -14,10 +14,11 @@ depends() {
 installkernel() {
     local _fipsmodules _mod
     _fipsmodules="aead aes_generic aes-x86_64 ansi_cprng arc4 blowfish camellia cast6 cbc ccm "
-    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod "
+    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod drbg "
     _fipsmodules+="ecb eseqiv fcrypt gcm ghash_generic hmac khazad lzo md4 md5 michael_mic rmd128 "
     _fipsmodules+="rmd160 rmd256 rmd320 rot13 salsa20 seed seqiv serpent sha1 sha224 sha256 sha256_generic "
     _fipsmodules+="sha384 sha512 sha512_generic tcrypt tea tnepres twofish wp256 wp384 wp512 xeta xtea xts zlib"
+    _fipsmodules+="aes_s390 des_s390 prng sha256_s390 sha_common des_check_key ghash_s390 sha1_s390 sha512_s390"
 
     mkdir -m 0755 -p "${initdir}/etc/modprobe.d"
 
@@ -40,7 +41,8 @@ install() {
 
     inst_libdir_file libsoftokn3.so libsoftokn3.so \
         libsoftokn3.chk libfreebl3.so libfreebl3.chk \
-        libssl.so 'hmaccalc/sha512hmac.hmac' libssl.so.10
+        libssl.so 'hmaccalc/sha512hmac.hmac' libssl.so.10 \
+        libfreeblpriv3.so libfreeblpriv3.chk
 
     inst_multiple -o prelink
     inst_simple /etc/system-fips

modules.d/01systemd-initrd/module-setup.sh

@@ -0,0 +1,68 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    [[ $mount_needs ]] && return 1
+
+    if ! dracut_module_included "systemd"; then
+        derror "dracut-systemd needs systemd in the initramfs"
+        return 1
+    fi
+
+    return 0
+}
+
+# called by dracut
+depends() {
+    echo "systemd"
+}
+
+installkernel() {
+    return 0
+}
+
+# called by dracut
+install() {
+    local _mods
+
+    inst_multiple -o \
+        $systemdsystemunitdir/initrd.target \
+        $systemdsystemunitdir/initrd-fs.target \
+        $systemdsystemunitdir/initrd-root-fs.target \
+        $systemdsystemunitdir/initrd-switch-root.target \
+        $systemdsystemunitdir/initrd-switch-root.service \
+        $systemdsystemunitdir/initrd-cleanup.service \
+        $systemdsystemunitdir/initrd-udevadm-cleanup-db.service \
+        $systemdsystemunitdir/initrd-parse-etc.service
+
+    ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target"
+
+    if [ -e /etc/os-release ]; then
+        . /etc/os-release
+        VERSION+=" "
+        PRETTY_NAME+=" "
+    else
+        VERSION=""
+        PRETTY_NAME=""
+    fi
+    NAME=dracut
+    ID=dracut
+    VERSION+="dracut-$DRACUT_VERSION"
+    PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)"
+    VERSION_ID=$DRACUT_VERSION
+    ANSI_COLOR="0;34"
+
+    {
+        echo NAME=\"$NAME\"
+        echo VERSION=\"$VERSION\"
+        echo ID=$ID
+        echo VERSION_ID=$VERSION_ID
+        echo PRETTY_NAME=\"$PRETTY_NAME\"
+        echo ANSI_COLOR=\"$ANSI_COLOR\"
+    } > $initdir/usr/lib/initrd-release
+    echo dracut-$DRACUT_VERSION > $initdir/lib/dracut/dracut-$DRACUT_VERSION
+    ln -sf ../usr/lib/initrd-release $initdir/etc/initrd-release
+    ln -sf initrd-release $initdir/usr/lib/os-release
+    ln -sf initrd-release $initdir/etc/os-release
+}
+

modules.d/02caps/caps.sh

@@ -4,7 +4,7 @@ capsmode=$(getarg rd.caps)
 
 if [ "$capsmode" = "1" ]; then
     CAPS_INIT_DROP=$(getarg rd.caps.initdrop=)
-    CAPS_USERMODEHELPER_BSET=$(capsh --drop="$CAPS_INIT_DROP" -- -c 'while read a b ; do [ "$a" = "CapBnd:" ] && echo $((0x${b:$((${#b}-8)):8})) $((0x${b:$((${#b}-16)):8})) && break; done < /proc/self/status')
+    CAPS_USERMODEHELPER_BSET=$(capsh --drop="$CAPS_INIT_DROP" -- -c 'while read a b  || [ -n "$a" ]; do [ "$a" = "CapBnd:" ] && echo $((0x${b:$((${#b}-8)):8})) $((0x${b:$((${#b}-16)):8})) && break; done < /proc/self/status')
     CAPS_MODULES_DISABLED=$(getarg rd.caps.disablemodules=)
     CAPS_KEXEC_DISABLED=$(getarg rd.caps.disablekexec=)
 

modules.d/02systemd-networkd/module-setup.sh

@@ -0,0 +1,71 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    [[ $mount_needs ]] && return 1
+
+    if ! dracut_module_included "systemd"; then
+        derror "dracut-systemd needs systemd in the initramfs"
+        return 1
+    fi
+
+    return 255
+}
+
+# called by dracut
+depends() {
+    echo "systemd kernel-network-modules"
+}
+
+installkernel() {
+    return 0
+}
+
+# called by dracut
+install() {
+    inst_multiple -o \
+        $systemdutildir/systemd-networkd \
+        $systemdutildir/systemd-networkd-wait-online \
+        $systemdsystemunitdir/systemd-networkd-wait-online.service \
+        $systemdsystemunitdir/systemd-networkd.service \
+        $systemdsystemunitdir/systemd-networkd.socket \
+        $systemdutildir/network/99-default.link \
+        networkctl ip
+
+        #hostnamectl timedatectl
+        # $systemdutildir/systemd-timesyncd \
+        # $systemdutildir/systemd-timedated \
+        # $systemdutildir/systemd-hostnamed \
+        # $systemdutildir/systemd-resolvd \
+        # $systemdutildir/systemd-resolve-host \
+        # $systemdsystemunitdir/systemd-resolved.service \
+        # $systemdsystemunitdir/systemd-hostnamed.service \
+        # $systemdsystemunitdir/systemd-timesyncd.service \
+        # $systemdsystemunitdir/systemd-timedated.service \
+        # $systemdsystemunitdir/time-sync.target \
+        # /etc/systemd/resolved.conf \
+
+
+    # inst_dir /var/lib/systemd/clock
+
+    egrep '^systemd-network:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    egrep '^systemd-network:' /etc/group >> "$initdir/etc/group"
+    # egrep '^systemd-timesync:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    # egrep '^systemd-timesync:' /etc/group >> "$initdir/etc/group"
+
+    _arch=$(uname -m)
+    inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_myhostname.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_resolve.so.*"
+
+    for i in \
+        systemd-networkd-wait-online.service \
+            systemd-networkd.service \
+            systemd-networkd.socket
+#            systemd-timesyncd.service
+    do
+        systemctl --root "$initdir" enable "$i"
+    done
+}
+

modules.d/10i18n/module-setup.sh

@@ -40,7 +40,7 @@ install() {
             *) cmd=grep ;;
         esac
 
-        for INCL in $($cmd "^include " $MAP | while read a a b; do echo ${a//\"/}; done); do
+        for INCL in $($cmd "^include " $MAP | while read a a b || [ -n "$a" ]; do echo ${a//\"/}; done); do
             for FN in $(find ${kbddir}/keymaps -type f -name $INCL\*); do
                 findkeymap $FN
             done
@@ -114,12 +114,12 @@ install() {
         rm -f -- "${initdir}${kbddir}/consoletrans/utflist"
         find "${initdir}${kbddir}/" -name README\* -delete
         find "${initdir}${kbddir}/" -name '*.gz' -print -quit \
-            | while read line; do
+            | while read line || [ -n "$line" ]; do
             inst_multiple gzip
             done
 
         find "${initdir}${kbddir}/" -name '*.bz2' -print -quit \
-            | while read line; do
+            | while read line || [ -n "$line" ]; do
             inst_multiple bzip2
             done
     }

modules.d/30convertfs/convertfs.sh

@@ -74,7 +74,7 @@ rm -f -- "$testfile"
 find_mount() {
     local dev mnt etc wanted_dev
     wanted_dev="$(readlink -e -q $1)"
-    while read dev mnt etc; do
+    while read dev mnt etc || [ -n "$dev" ]; do
         [ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
     done < /proc/mounts
     return 1
@@ -93,7 +93,7 @@ else
             return 1
         fi
 
-        while read a m a; do
+        while read a m a || [ -n "$m" ]; do
             [ "$m" = "$1" ] && return 0
         done < /proc/mounts
         return 1

modules.d/40network/dhclient-script.sh

@@ -43,7 +43,13 @@ setup_interface() {
         valid_lft ${lease_time} preferred_lft ${lease_time} \
         dev $netif
 
-    [ -n "$gw" ] && echo ip route replace default via $gw dev $netif > /tmp/net.$netif.gw
+    if [ -n "$gw" ] ; then
+        if [ "$mask" == "255.255.255.255" ] ; then
+            # point-to-point connection => set explicit route to gateway
+            echo ip route add $gw dev $netif > /tmp/net.$netif.gw
+        fi
+        echo ip route replace default via $gw dev $netif >> /tmp/net.$netif.gw
+    fi
 
     [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
     if  [ -n "$namesrv" ] ; then
@@ -93,8 +99,9 @@ case $reason in
         ;;
 
     PREINIT6)
-        echo "dhcp: PREINIT $netif up"
+        echo "dhcp: PREINIT6 $netif up"
         linkup $netif
+        wait_for_ipv6_dad $netif
         ;;
 
     BOUND)
@@ -111,7 +118,7 @@ case $reason in
         fi
         unset layer2
         setup_interface
-        set | while read line; do
+        set | while read line || [ -n "$line" ]; do
             [ "${line#new_}" = "$line" ] && continue
             echo "$line"
         done >/tmp/dhclient.$netif.dhcpopts
@@ -132,7 +139,7 @@ case $reason in
         echo "dhcp: BOND6 setting $netif"
         setup_interface6
 
-        set | while read line; do
+        set | while read line || [ -n "$line" ]; do
             [ "${line#new_}" = "$line" ] && continue
             echo "$line"
         done >/tmp/dhclient.$netif.dhcpopts

modules.d/40network/ifup.sh

@@ -216,7 +216,7 @@ if [ -e /tmp/team.info ]; then
             fi
         done
         # Do not add slaves now
-        teamd -d -U -n -t $teammaster -f /etc/teamd/$teammaster.conf
+        teamd -d -U -n -N -t $teammaster -f /etc/teamd/$teammaster.conf
         for slave in $working_slaves; do
             # team requires the slaves to be down before joining team
             ip link set $slave down
@@ -324,17 +324,19 @@ for p in $(getargs ip=); do
         eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
     done > /tmp/net.$netif.override
 
-    case $autoconf in
-        dhcp|on|any)
-            do_dhcp -4 ;;
-        dhcp6)
-            load_ipv6
-            do_dhcp -6 ;;
-        auto6)
-            do_ipv6auto ;;
-        *)
-            do_static ;;
-    esac
+    for autoopt in $(str_replace "$autoconf" "," " "); do
+        case $autoopt in
+            dhcp|on|any)
+                do_dhcp -4 ;;
+            dhcp6)
+                load_ipv6
+                do_dhcp -6 ;;
+            auto6)
+                do_ipv6auto ;;
+            *)
+                do_static ;;
+        esac
+    done
 
     > /tmp/net.${netif}.up
 

modules.d/40network/module-setup.sh

@@ -11,60 +11,13 @@ check() {
 
 # called by dracut
 depends() {
+    echo "kernel-network-modules"
     return 0
 }
 
 # called by dracut
 installkernel() {
-    # Include wired net drivers, excluding wireless
-
-    net_module_filter() {
-        local _net_drivers='eth_type_trans|register_virtio_device|usbnet_open'
-        local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
-        local _ret
-        # subfunctions inherit following FDs
-        local _merge=8 _side2=9
-        function nmf1() {
-            local _fname _fcont
-            while read _fname; do
-                [[ $_fname =~ $_unwanted_drivers ]] && continue
-                case "$_fname" in
-                    *.ko)    _fcont="$(<        $_fname)" ;;
-                    *.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
-                    *.ko.xz) _fcont="$(xz -dc   $_fname)" ;;
-                esac
-                [[   $_fcont =~ $_net_drivers
-                && ! $_fcont =~ iw_handler_get_spy ]] \
-                && echo "$_fname"
-            done
-            return 0
-        }
-        function rotor() {
-            local _f1 _f2
-            while read _f1; do
-                echo "$_f1"
-                if read _f2; then
-                    echo "$_f2" 1>&${_side2}
-                fi
-            done | nmf1 1>&${_merge}
-            return 0
-        }
-        # Use two parallel streams to filter alternating modules.
-        set +x
-        eval "( ( rotor ) ${_side2}>&1 | nmf1 ) ${_merge}>&1"
-        [[ $debug ]] && set -x
-        return 0
-    }
-
-    { find_kernel_modules_by_path drivers/net; if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then find_kernel_modules_by_path drivers/s390/net; fi; } \
-        | net_module_filter | instmods
-
-    #instmods() will take care of hostonly
-    instmods \
-        =drivers/net/phy \
-        =drivers/net/team \
-        =drivers/net/ethernet \
-        ecb arc4 bridge stp llc ipv6 bonding 8021q af_packet virtio_net
+    return 0
 }
 
 # called by dracut
@@ -79,7 +32,8 @@ install() {
     inst_script "$moddir/netroot.sh" "/sbin/netroot"
     inst_script "$moddir/dhclient-script.sh" "/sbin/dhclient-script"
     inst_simple "$moddir/net-lib.sh" "/lib/net-lib.sh"
-    inst_simple "$moddir/dhclient.conf" "/etc/dhclient.conf"
+    inst_simple -H "/etc/dhclient.conf"
+    cat "$moddir/dhclient.conf" >> "${initdir}/etc/dhclient.conf"
     inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
     inst_hook pre-udev 60 "$moddir/net-genrules.sh"
     inst_hook cmdline 91 "$moddir/dhcp-root.sh"

modules.d/40network/net-lib.sh

@@ -94,18 +94,18 @@ setup_net() {
     [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
     [ -z "$IFACES" ] && IFACES="$netif"
     # run the scripts written by ifup
-    [ -e /tmp/net.$netif.gw ]            && . /tmp/net.$netif.gw
     [ -e /tmp/net.$netif.hostname ]      && . /tmp/net.$netif.hostname
     [ -e /tmp/net.$netif.override ]      && . /tmp/net.$netif.override
     [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
     # set up resolv.conf
     [ -e /tmp/net.$netif.resolv.conf ] && \
         cp -f /tmp/net.$netif.resolv.conf /etc/resolv.conf
+    [ -e /tmp/net.$netif.gw ]            && . /tmp/net.$netif.gw
 
     # add static route
     for _p in $(getargs rd.route); do
         route_to_var "$_p" || continue
-        [ -n "$route_dev" ] && [ "$route_dev" != "$netif"] && continue
+        [ -n "$route_dev" ] && [ "$route_dev" != "$netif" ] && continue
         ip route add "$route_mask" ${route_gw:+via "$route_gw"} ${route_dev:+dev "$route_dev"}
         if strstr ":" "$route_mask"; then
             printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
@@ -308,6 +308,23 @@ parse_iscsi_root()
             ;;
     esac
 
+    unset iscsi_target_name
+    # extract target name
+    case "$v" in
+        *:iqn.*)
+            iscsi_target_name=iqn.${v##*:iqn.}
+            v=${v%:iqn.*}:
+            ;;
+        *:eui.*)
+            iscsi_target_name=eui.${v##*:eui.}
+            v=${v%:eui.*}:
+            ;;
+        *:naa.*)
+            iscsi_target_name=naa.${v##*:naa.}
+            v=${v%:naa.*}:
+            ;;
+    esac
+
     # parse the rest
     OLDIFS="$IFS"
     IFS=:
@@ -317,24 +334,33 @@ parse_iscsi_root()
     iscsi_protocol=$1; shift # ignored
     iscsi_target_port=$1; shift
 
+    if [ -n "$iscsi_target_name" ]; then
+        if [ $# -eq 3 ]; then
+            iscsi_iface_name=$1; shift
+        fi
+        if [ $# -eq 2 ]; then
+            iscsi_netdev_name=$1; shift
+        fi
+        iscsi_lun=$1; shift
+        if [ $# -ne 0 ]; then
+            warn "Invalid parameter in iscsi: parameter!"
+            return 1
+        fi
+        return 0
+    fi
+
+
     if [ $# -gt 3 ] && [ -n "$1$2" ]; then
-        iscsi_iface_name=$1; shift
-        iscsi_netdev_name=$1; shift
+        if [ -z "$3" ] || [ "$3" -ge 0 ]  2>/dev/null ; then
+            iscsi_iface_name=$1; shift
+            iscsi_netdev_name=$1; shift
+        fi
     fi
 
     iscsi_lun=$1; shift
 
-    if [ $# -gt 2 ]; then
-        warn "Invalid parameter in iscsi: parameter!"
-        return 1
-    fi
-
-    if [ $# -eq 2 ]; then
-        iscsi_target_name="$1:$2"
-    else
-        iscsi_target_name="$1"
-    fi
-
+    iscsi_target_name=$(printf "%s:" "$@")
+    iscsi_target_name=${iscsi_target_name%:}
 }
 
 ip_to_var() {
@@ -494,7 +520,7 @@ wait_for_ipv6_dad() {
     local cnt=0
     local li
     while [ $cnt -lt 500 ]; do
-        li=$(ip -6 addr show dev $1)
+        li=$(ip -6 addr show dev $1 scope link)
         strstr "$li" "tentative" || return 0
         sleep 0.1
         cnt=$(($cnt+1))
@@ -528,13 +554,18 @@ type hostname >/dev/null 2>&1 || \
 }
 
 iface_has_link() {
+    local cnt=0
     local interface="$1" flags=""
     [ -n "$interface" ] || return 2
     interface="/sys/class/net/$interface"
     [ -d "$interface" ] || return 2
     linkup "$1"
-    [ "$(cat $interface/carrier)" = 1 ] || return 1
-    # XXX Do we need to reset the flags here? anaconda never bothered..
+    while [ $cnt -lt 50 ]; do
+        [ "$(cat $interface/carrier)" = 1 ] && return 0
+        sleep 0.1
+        cnt=$(($cnt+1))
+    done
+    return 1
 }
 
 find_iface_with_link() {
@@ -551,7 +582,19 @@ find_iface_with_link() {
 }
 
 is_persistent_ethernet_name() {
-    case "$1" in
+    local _netif="$1"
+    local _name_assign_type="0"
+
+    [ -f "/sys/class/net/$_netif/name_assign_type" ] \
+        && _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
+
+    # NET_NAME_ENUM 1
+    [ "$_name_assign_type" = "1" ] && return 1
+
+    # NET_NAME_PREDICTABLE 2
+    [ "$_name_assign_type" = "2" ] && return 0
+
+    case "$_netif" in
         # udev persistent interface names
         eno[0-9]|eno[0-9][0-9]|eno[0-9][0-9][0-9]*)
             ;;
@@ -571,3 +614,35 @@ is_persistent_ethernet_name() {
     esac
     return 0
 }
+
+is_kernel_ethernet_name() {
+    local _netif="$1"
+    local _name_assign_type="1"
+
+    if [ -e "/sys/class/net/$_netif/name_assign_type" ]; then
+        _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
+
+        case "$_name_assign_type" in
+            2|3|4)
+                # NET_NAME_PREDICTABLE 2
+                # NET_NAME_USER 3
+                # NET_NAME_RENAMED 4
+                return 1
+                ;;
+            1|*)
+                # NET_NAME_ENUM 1
+                return 0
+                ;;
+        esac
+    fi
+
+    # fallback to error prone manual name check
+    case "$_netif" in
+        eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]*)
+            return 0
+            ;;
+        *)
+            return 1
+    esac
+
+}

modules.d/40network/parse-ip-opts.sh

@@ -64,24 +64,26 @@ for p in $(getargs ip=); do
     fi
 
     # Error checking for autoconf in combination with other values
-    case $autoconf in
-        error) die "Error parsing option 'ip=$p'";;
-        bootp|rarp|both) die "Sorry, ip=$autoconf is currenty unsupported";;
-        none|off)
-            [ -z "$ip" ] && \
-            die "For argument 'ip=$p'\nValue '$autoconf' without static configuration does not make sense"
-            [ -z "$mask" ] && \
-                die "Sorry, automatic calculation of netmask is not yet supported"
-            ;;
-        auto6);;
-        dhcp|dhcp6|on|any) \
-            [ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
-            die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
-            [ -n "$ip" ] && \
-                die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoconf'"
-            ;;
-        *) die "For argument 'ip=$p'\nSorry, unknown value '$autoconf'";;
-    esac
+    for autoopt in $(str_replace "$autoconf" "," " "); do
+        case $autoopt in
+            error) die "Error parsing option 'ip=$p'";;
+            bootp|rarp|both) die "Sorry, ip=$autoopt is currenty unsupported";;
+            none|off)
+                [ -z "$ip" ] && \
+                    die "For argument 'ip=$p'\nValue '$autoopt' without static configuration does not make sense"
+                [ -z "$mask" ] && \
+                    die "Sorry, automatic calculation of netmask is not yet supported"
+                ;;
+            auto6);;
+            dhcp|dhcp6|on|any) \
+                [ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
+                    die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
+                [ -n "$ip" ] && \
+                    die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoopt'"
+                ;;
+            *) die "For argument 'ip=$p'\nSorry, unknown value '$autoopt'";;
+        esac
+    done
 
     if [ -n "$dev" ] ; then
         # We don't like duplicate device configs

modules.d/45ifcfg/write-ifcfg.sh

@@ -22,7 +22,7 @@ get_config_line_by_subchannel()
     local line
 
     CHANNELS="$1"
-    while read line; do
+    while read line || [ -n "$line" ]; do
         if strstr "$line" "$CHANNELS"; then
             echo $line
             return 0
@@ -80,18 +80,41 @@ print_s390() {
     return 0
 }
 
+hw_bind() {
+    local _netif="$1"
+    local _macaddr="$2"
+
+    [ -n "$_macaddr" ] \
+        && echo "MACADDR=\"$_macaddr\""
+
+    print_s390 "$_netif" \
+        && return 0
+
+    [ -n "$_macaddr" ] && return 0
+
+    is_persistent_ethernet_name "$_netif" && return 0
+
+    [ -f "/sys/class/net/$_netif/addr_assign_type" ] \
+        && [ "$(cat "/sys/class/net/$_netif/addr_assign_type")" != "0" ] \
+        && return 1
+
+    [ -f "/sys/class/net/$_netif/address" ] \
+        || return 1
+
+    echo "HWADDR=\"$(cat /sys/class/net/$_netif/address)\""
+}
+
 interface_bind() {
-    local netif="$1"
-    local macaddr="$2"
-    if ! print_s390 $netif; then
-        if [ -z "$macaddr" ] && \
-            ! is_persistent_ethernet_name "$netif" && \
-            [ -f /sys/class/net/$netif/addr_assign_type ] && \
-            [ "$(cat /sys/class/net/$netif/addr_assign_type)" = "0" ] && \
-            [ -f /sys/class/net/$netif/address ]; then
-            echo "HWADDR=\"$(cat /sys/class/net/$netif/address)\""
-        fi
+    local _netif="$1"
+    local _macaddr="$2"
+
+    # see, if we can bind it to some hw parms
+    if hw_bind "$_netif" "$_macaddr"; then
+        # only print out DEVICE, if it's user assigned
+        is_kernel_ethernet_name "$_netif" && return 0
     fi
+
+    echo "DEVICE=\"$_netif\""
 }
 
 for netup in /tmp/net.*.did-setup ; do
@@ -114,6 +137,8 @@ for netup in /tmp/net.*.did-setup ; do
     unset macaddr
     unset slave
     unset ethname
+    unset vlan
+
     [ -e /tmp/bond.${netif}.info ] && . /tmp/bond.${netif}.info
 
     uuid=$(cat /proc/sys/kernel/random/uuid)
@@ -129,7 +154,8 @@ for netup in /tmp/net.*.did-setup ; do
 
     {
         echo "# Generated by dracut initrd"
-        echo "DEVICE=\"$netif\""
+        echo "NAME=\"$netif\""
+        interface_bind "$netif" "$macaddr"
         echo "ONBOOT=yes"
         echo "NETBOOT=yes"
         echo "UUID=\"$uuid\""
@@ -175,10 +201,7 @@ for netup in /tmp/net.*.did-setup ; do
     if [ -z "$bridge" ] && [ -z "$bond" ] && [ -z "$vlan" ]; then
         # standard interface
         {
-            [ -n "$macaddr" ] && echo "MACADDR=\"$macaddr\""
-            interface_bind "$netif" "$macaddr"
             echo "TYPE=Ethernet"
-            echo "NAME=\"$netif\""
             [ -n "$mtu" ] && echo "MTU=\"$mtu\""
         } >> /tmp/ifcfg/ifcfg-$netif
     fi
@@ -205,16 +228,15 @@ for netup in /tmp/net.*.did-setup ; do
             # write separate ifcfg file for the raw eth interface
             (
                 echo "# Generated by dracut initrd"
-                echo "DEVICE=\"$slave\""
+                echo "NAME=\"$slave\""
                 echo "TYPE=Ethernet"
                 echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
                 echo "SLAVE=yes"
                 echo "MASTER=\"$netif\""
-                echo "NAME=\"$slave\""
                 echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
+                unset macaddr
                 [ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override
-                [ -n "$macaddr" ] && echo "MACADDR=\"$macaddr\""
                 interface_bind "$slave" "$macaddr"
             ) >> /tmp/ifcfg/ifcfg-$slave
         done
@@ -230,15 +252,14 @@ for netup in /tmp/net.*.did-setup ; do
             # write separate ifcfg file for the raw eth interface
             (
                 echo "# Generated by dracut initrd"
-                echo "DEVICE=\"$slave\""
+                echo "NAME=\"$slave\""
                 echo "TYPE=Ethernet"
                 echo "ONBOOT=yes"
                 echo "NETBOOT=yes"
                 echo "BRIDGE=\"$bridgename\""
-                echo "NAME=\"$slave\""
                 echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
+                unset macaddr
                 [ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override
-                [ -n "$macaddr" ] && echo "MACADDR=\"$macaddr\""
                 interface_bind "$slave" "$macaddr"
             ) >> /tmp/ifcfg/ifcfg-$slave
         done

modules.d/45url-lib/url-lib.sh

@@ -120,7 +120,7 @@ command -v ctorrent >/dev/null \
 
 nfs_already_mounted() {
     local server="$1" path="$2" localdir="" s="" p=""
-    cat /proc/mounts | while read src mnt rest; do
+    cat /proc/mounts | while read src mnt rest || [ -n "$src" ]; do
         splitsep ":" "$src" s p
         if [ "$server" = "$s" ]; then
             if [ "$path" = "$p" ]; then

modules.d/50drm/module-setup.sh

@@ -22,7 +22,7 @@ installkernel() {
         local _merge=8 _side2=9
         function nmf1() {
             local _fname _fcont
-            while read _fname; do
+            while read _fname || [ -n "$_fname" ]; do
                 case "$_fname" in
                     *.ko)    _fcont="$(<        $_fname)" ;;
                     *.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
@@ -35,7 +35,7 @@ installkernel() {
         }
         function rotor() {
             local _f1 _f2
-            while read _f1; do
+            while read _f1 || [ -n "$_f1" ]; do
                 echo "$_f1"
                 if read _f2; then
                     echo "$_f2" 1>&${_side2}
@@ -60,6 +60,8 @@ installkernel() {
             ${NULL}
     fi
 
+    instmods amdkfd hyperv_fb
+
     for _modname in $(find_kernel_modules_by_path drivers/gpu/drm \
         | drm_module_filter) ; do
         # if the hardware is present, include module even if it is not currently loaded,
@@ -68,6 +70,10 @@ installkernel() {
         if [[ $hostonly ]] && modinfo -F alias $_modname | sed -e 's,\?,\.,g' -e 's,\*,\.\*,g' \
             | grep -qxf - /sys/bus/{pci/devices,soc/devices/soc?}/*/modalias 2>/dev/null; then
             hostonly='' instmods $_modname
+            # if radeon.ko is installed, we want amdkfd also
+            if strstr "$_modname" radeon.ko; then
+                hostonly='' instmods amdkfd
+            fi
             continue
         fi
         instmods $_modname

modules.d/50plymouth/module-setup.sh

@@ -3,7 +3,7 @@
 # called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
-    require_binaries plymouthd plymouth
+    require_binaries plymouthd plymouth plymouth-set-default-theme
 }
 
 # called by dracut

modules.d/50plymouth/plymouth-populate-initrd.sh

@@ -26,7 +26,7 @@ if [[ $hostonly ]]; then
     if [ -L /usr/share/plymouth/themes/default.plymouth ]; then
         inst /usr/share/plymouth/themes/default.plymouth
         # Install plugin for this theme
-        PLYMOUTH_PLUGIN=$(grep "^ModuleName=" /usr/share/plymouth/themes/default.plymouth | while read a b c; do echo $b; done;)
+        PLYMOUTH_PLUGIN=$(grep "^ModuleName=" /usr/share/plymouth/themes/default.plymouth | while read a b c || [ -n "$b" ]; do echo $b; done;)
         inst_libdir_file "plymouth/${PLYMOUTH_PLUGIN}.so"
     fi
 else

modules.d/80cms/cms-write-ifcfg.sh

@@ -7,6 +7,7 @@ mkdir -m 0755 -p /run/initramfs/state/etc/sysconfig/network-scripts
 function cms_write_config()
 {
     . /tmp/cms.conf
+    SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')"
     OLDIFS=$IFS
     IFS=,
     read -a subch_array <<< "indexzero,$SUBCHANNELS"

modules.d/80cms/cmssetup.sh

@@ -42,7 +42,7 @@ function dasd_settle() {
 }
 
 function dasd_settle_all() {
-    for dasdccw in $(while read line; do echo "${line%%(*}"; done < /proc/dasd/devices) ; do
+    for dasdccw in $(while read line || [ -n "$line" ]; do echo "${line%%(*}"; done < /proc/dasd/devices) ; do
         if ! dasd_settle $dasdccw ; then
             echo $"Could not access DASD $dasdccw in time"
             return 1
@@ -84,7 +84,7 @@ function readcmsfile() # $1=dasdport $2=filename
     #               dasd_mod must be loaded without setting any DASD online
     dev=$(canonicalize_devno $1)
     numcpus=$(
-        while read line; do
+        while read line || [ -n "$line" ]; do
             if strstr "$line" "# processors"; then
                 echo ${line##*:};
                 break;
@@ -181,7 +181,7 @@ processcmsfile()
 
     unset _do_zfcp
     for i in ${!FCP_*}; do
-        echo "${!i}" | while read port rest; do
+        echo "${!i}" | while read port rest || [ -n "$port" ]; do
             case $port in
                 *.*.*)
                     ;;

modules.d/90crypt/crypt-lib.sh

@@ -7,7 +7,7 @@ crypttab_contains() {
     local luks="$1"
     local l d rest
     if [ -f /etc/crypttab ]; then
-        while read l d rest; do
+        while read l d rest || [ -n "$l" ]; do
             strstr "${l##luks-}" "${luks##luks-}" && return 0
             strstr "$d" "${luks##luks-}" && return 0
         done < /etc/crypttab
@@ -42,10 +42,10 @@ ask_for_password() {
 
     while [ $# -gt 0 ]; do
         case "$1" in
-            --cmd) ply_cmd="$2"; tty_cmd="$2" shift;;
+            --cmd) ply_cmd="$2"; tty_cmd="$2"; shift;;
             --ply-cmd) ply_cmd="$2"; shift;;
             --tty-cmd) tty_cmd="$2"; shift;;
-            --prompt) ply_prompt="$2"; tty_prompt="$2" shift;;
+            --prompt) ply_prompt="$2"; tty_prompt="$2"; shift;;
             --ply-prompt) ply_prompt="$2"; shift;;
             --tty-prompt) tty_prompt="$2"; shift;;
             --tries) ply_tries="$2"; tty_tries="$2"; shift;;
@@ -155,7 +155,7 @@ getkey() {
     [ -f "$keys_file" ] || return 1
 
     local IFS=:
-    while read luks_dev key_dev key_path; do
+    while read luks_dev key_dev key_path || [ -n "$luks_dev" ]; do
         if match_dev "$luks_dev" "$for_dev"; then
             echo "${key_dev}:${key_path}"
             return 0

modules.d/90crypt/cryptroot-ask.sh

@@ -23,7 +23,7 @@ numtries=${3:-10}
 
 # TODO: improve to support what cmdline does
 if [ -f /etc/crypttab ] && getargbool 1 rd.luks.crypttab -d -n rd_NO_CRYPTTAB; then
-    while read name dev luksfile luksoptions; do
+    while read name dev luksfile luksoptions || [ -n "$name" ]; do
         # ignore blank lines and comments
         if [ -z "$name" -o "${name#\#}" != "$name" ]; then
             continue

modules.d/90crypt/module-setup.sh

@@ -35,7 +35,7 @@ cmdline() {
 
         UUID=$(
             blkid -u crypto -o export $dev \
-                | while read line; do
+                | while read line || [ -n "$line" ]; do
                 [[ ${line#UUID} = $line ]] && continue
                 printf "%s" "${line#UUID=}"
                 break
@@ -50,8 +50,8 @@ cmdline() {
 install() {
 
     if [[ $hostonly_cmdline == "yes" ]]; then
-        cmdline >> "${initdir}/etc/cmdline.d/90crypt.conf"
-        echo >> "${initdir}/etc/cmdline.d/90crypt.conf"
+        local _cryptconf=$(cmdline)
+        [[ $_cryptconf ]] && printf "%s\n" "$_cryptconf" >> "${initdir}/etc/cmdline.d/90crypt.conf"
     fi
 
     inst_multiple cryptsetup rmdir readlink umount
@@ -65,7 +65,7 @@ install() {
 
     if [[ $hostonly ]] && [[ -f /etc/crypttab ]]; then
         # filter /etc/crypttab for the devices we need
-        while read _mapper _dev _rest; do
+        while read _mapper _dev _rest || [ -n "$_mapper" ]; do
             [[ $_mapper = \#* ]] && continue
             [[ $_dev ]] || continue
 

modules.d/90crypt/parse-crypt.sh

@@ -14,6 +14,12 @@ else
     LUKS=$(getargs rd.luks.uuid -d rd_LUKS_UUID)
     tout=$(getarg rd.luks.key.tout)
 
+    if [ -e /etc/crypttab ]; then
+        while read _mapper _dev _rest ; do
+            set_systemd_timeout_for_dev $_dev
+        done < /etc/crypttab
+    fi
+
     if [ -n "$LUKS" ]; then
         for luksid in $LUKS; do
 

modules.d/90dm/dm-shutdown.sh

@@ -1,11 +1,12 @@
 #!/bin/sh
 
 _do_dm_shutdown() {
-    local ret
+    local ret=0
     local final=$1
     info "Disassembling device-mapper devices"
-    dmsetup -v remove_all
-    ret=$?
+    for dev in $(dmsetup info -c --noheadings -o name) ; do
+        dmsetup -v --noudevsync remove "$dev" || ret=$?
+    done
     if [ "x$final" != "x" ]; then
         info "dmsetup ls --tree"
         dmsetup ls --tree 2>&1 | vinfo

modules.d/90dmraid/dmraid.sh

@@ -37,6 +37,7 @@ if [ -n "$DM_RAIDS" ] || getargbool 0 rd.auto; then
             info "Activating $s"
             dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
             [ -e "/dev/mapper/$s" ] && kpartx -a "/dev/mapper/$s" 2>&1 | vinfo
+            udevsettle
         done
     fi
 

modules.d/90dmraid/module-setup.sh

@@ -64,8 +64,8 @@ install() {
     local _i
 
     if [[ $hostonly_cmdline == "yes" ]]; then
-        cmdline >> "${initdir}/etc/cmdline.d/90dmraid.conf"
-        echo >> "${initdir}/etc/cmdline.d/90dmraid.conf"
+        local _raidconf=$(cmdline)
+        [[ $_raidconf ]] && printf "%s\n" "$_raidconf" >> "${initdir}/etc/cmdline.d/90dmraid.conf"
     fi
 
     inst_multiple dmraid
@@ -74,8 +74,6 @@ install() {
 
     inst "$moddir/dmraid.sh" /sbin/dmraid_scan
 
-    inst_rules 64-md-raid.rules
-
     inst_libdir_file "libdmraid-events*.so*"
 
     inst_rules "$moddir/61-dmraid-imsm.rules"

modules.d/90dmsquash-live/apply-live-updates.sh

@@ -1,17 +1,20 @@
 #!/bin/sh
 
-if [ -b /dev/mapper/live-rw ] && [ -d /updates ]; then
+if [ -b /dev/mapper/live-rw ] && [ -d /run/initramfs/live/updates -o -d /updates ]; then
     info "Applying updates to live image..."
     mount -o bind /run $NEWROOT/run
     # avoid overwriting symlinks (e.g. /lib -> /usr/lib) with directories
-    (
-        cd /updates
-        find . -depth -type d | while read dir; do
-            mkdir -p "$NEWROOT/$dir"
-        done
-        find . -depth \! -type d | while read file; do
-            cp -a "$file" "$NEWROOT/$file"
-        done
-    )
+    for d in /updates /run/initramfs/live/updates; do
+        [ -d "$d" ] || continue
+        (
+            cd $d
+            find . -depth -type d | while read dir; do
+                mkdir -p "$NEWROOT/$dir"
+            done
+            find . -depth \! -type d | while read file; do
+                cp -a "$file" "$NEWROOT/$file"
+            done
+        )
+    done
     umount $NEWROOT/run
 fi

modules.d/90dmsquash-live/checkisomd5@.service

@@ -11,3 +11,4 @@ StandardInput=tty-force
 StandardOutput=inherit
 StandardError=inherit
 TimeoutSec=0
+SuccessExitStatus=2

modules.d/90dmsquash-live/dmsquash-live-genrules.sh

@@ -3,10 +3,10 @@
 case "$root" in
   live:/dev/*)
     {
-        printf 'KERNEL=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root $env{DEVNAME}"\n' \
-            ${root#live:/dev/}
-        printf 'SYMLINK=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root $env{DEVNAME}"\n' \
-            ${root#live:/dev/}
+        printf 'KERNEL=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root %s"\n' \
+            "${root#live:/dev/}" "${root#live:}"
+        printf 'SYMLINK=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root %s"\n' \
+            "${root#live:/dev/}" "${root#live:}"
     } >> /etc/udev/rules.d/99-live-squash.rules
     wait_for_dev -n "${root#live:}"
   ;;

modules.d/90dmsquash-live/dmsquash-live-root.sh

@@ -27,6 +27,10 @@ getargbool 0 rd.live.overlay.reset -d -y reset_overlay && reset_overlay="yes"
 getargbool 0 rd.live.overlay.readonly -d -y readonly_overlay && readonly_overlay="--readonly" || readonly_overlay=""
 overlay=$(getarg rd.live.overlay -d overlay)
 getargbool 0 rd.writable.fsimg -d -y writable_fsimg && writable_fsimg="yes"
+overlay_size=$(getarg rd.live.overlay.size=)
+[ -z "$overlay_size" ] && overlay_size=512
+
+getargbool 0 rd.live.overlay.thin && thin_snapshot="yes"
 
 # CD/DVD media check
 [ -b $livedev ] && fs=$(blkid -s TYPE -o value $livedev)
@@ -42,7 +46,7 @@ if [ -n "$check" ]; then
     else
         checkisomd5 --verbose $livedev
     fi
-    if [ $? -ne 0 ]; then
+    if [ $? -eq 1 ]; then
         die "CD check failed!"
         exit 1
     fi
@@ -125,7 +129,7 @@ do_live_overlay() {
             sleep 5
         fi
 
-        dd if=/dev/null of=/overlay bs=1024 count=1 seek=$((512*1024)) 2> /dev/null
+        dd if=/dev/null of=/overlay bs=1024 count=1 seek=$((overlay_size*1024)) 2> /dev/null
         if [ -n "$setup" -a -n "$readonly_overlay" ]; then
             RO_OVERLAY_LOOPDEV=$( losetup -f )
             losetup $RO_OVERLAY_LOOPDEV /overlay
@@ -144,7 +148,31 @@ do_live_overlay() {
         base=$BASE_LOOPDEV
         over=$OVERLAY_LOOPDEV
     fi
-    echo 0 $sz snapshot $base $over p 8 | dmsetup create live-rw
+
+    if [ -n "$thin_snapshot" ]; then
+        modprobe dm_thin_pool
+        mkdir /run/initramfs/thin-overlay
+
+        # In block units (512b)
+        thin_data_sz=$(( $overlay_size * 1024 * 1024 / 512 ))
+        thin_meta_sz=$(( $thin_data_sz / 10 ))
+
+        # It is important to have the backing file on a tmpfs
+        # this is needed to let the loopdevice support TRIM
+        dd if=/dev/null of=/run/initramfs/thin-overlay/meta bs=1b count=1 seek=$((thin_meta_sz)) 2> /dev/null
+        dd if=/dev/null of=/run/initramfs/thin-overlay/data bs=1b count=1 seek=$((thin_data_sz)) 2> /dev/null
+
+        THIN_META_LOOPDEV=$( losetup --show -f /run/initramfs/thin-overlay/meta )
+        THIN_DATA_LOOPDEV=$( losetup --show -f /run/initramfs/thin-overlay/data )
+
+        echo 0 $thin_data_sz thin-pool $THIN_META_LOOPDEV $THIN_DATA_LOOPDEV 1024 1024 | dmsetup create live-overlay-pool
+        dmsetup message /dev/mapper/live-overlay-pool 0 "create_thin 0"
+
+        # Create a snapshot of the base image
+        echo 0 $sz thin /dev/mapper/live-overlay-pool 0 $base | dmsetup create live-rw
+    else
+        echo 0 $sz snapshot $base $over p 8 | dmsetup create live-rw
+    fi
 
     # Create a device that always points to a ro base image
     echo 0 $sz linear $base 0 | dmsetup create --readonly live-base
@@ -162,9 +190,9 @@ fi
 
 if [ -n "$OSMINSQFS" ]; then
     # decompress the delta data
-    dd if=$OSMINSQFS of=/osmin.img 2> /dev/null
+    dd if=$OSMINSQFS of=/run/initramfs/osmin.img 2> /dev/null
     OSMIN_SQUASHED_LOOPDEV=$( losetup -f )
-    losetup -r $OSMIN_SQUASHED_LOOPDEV /osmin.img
+    losetup -r $OSMIN_SQUASHED_LOOPDEV /run/initramfs/osmin.img
     mkdir -m 0755 -p /run/initramfs/squashfs.osmin
     mount -n -t squashfs -o ro $OSMIN_SQUASHED_LOOPDEV /run/initramfs/squashfs.osmin
     OSMIN_LOOPDEV=$( losetup -f )
@@ -172,29 +200,6 @@ if [ -n "$OSMINSQFS" ]; then
     umount -l /run/initramfs/squashfs.osmin
 fi
 
-# we might have an embedded fs image to use as rootfs (uncompressed live)
-if [ -e /run/initramfs/live/${live_dir}/ext3fs.img ]; then
-    FSIMG="/run/initramfs/live/${live_dir}/ext3fs.img"
-elif [ -e /run/initramfs/live/${live_dir}/rootfs.img ]; then
-    FSIMG="/run/initramfs/live/${live_dir}/rootfs.img"
-fi
-
-if [ -n "$FSIMG" ] ; then
-    BASE_LOOPDEV=$( losetup -f )
-
-    if [ -n "$writable_fsimg" ] ; then
-        # mount the provided fileysstem read/write
-        echo "Unpacking live filesystem (may take some time)"
-        unpack_archive $FSIMG /tmp/fsimg/
-        losetup $BASE_LOOPDEV /tmp/fsimg/rootfs.img
-        echo "0 $( blockdev --getsize $BASE_LOOPDEV ) linear $BASE_LOOPDEV 0" | dmsetup create live-rw
-    else
-        # mount the filesystem read-only and add a dm snapshot for writes
-        losetup -r $BASE_LOOPDEV $FSIMG
-        do_live_from_base_loop
-    fi
-fi
-
 # we might have an embedded fs image on squashfs (compressed live)
 if [ -e /run/initramfs/live/${live_dir}/${squash_image} ]; then
     SQUASHED="/run/initramfs/live/${live_dir}/${squash_image}"
@@ -204,10 +209,10 @@ if [ -e "$SQUASHED" ] ; then
     if [ -n "$live_ram" ] ; then
         echo "Copying live image to RAM..."
         echo "(this may take a few minutes)"
-        dd if=$SQUASHED of=/squashed.img bs=512 2> /dev/null
+        dd if=$SQUASHED of=/run/initramfs/squashed.img bs=512 2> /dev/null
         umount -n /run/initramfs/live
         echo "Done copying live image to RAM."
-        SQUASHED="/squashed.img"
+        SQUASHED="/run/initramfs/squashed.img"
     fi
 
     SQUASHED_LOOPDEV=$( losetup -f )
@@ -215,18 +220,42 @@ if [ -e "$SQUASHED" ] ; then
     mkdir -m 0755 -p /run/initramfs/squashfs
     mount -n -t squashfs -o ro $SQUASHED_LOOPDEV /run/initramfs/squashfs
 
-    BASE_LOOPDEV=$( losetup -f )
-    if [ -f /run/initramfs/squashfs/LiveOS/ext3fs.img ]; then
-        losetup -r $BASE_LOOPDEV /run/initramfs/squashfs/LiveOS/ext3fs.img
-    elif [ -f /run/initramfs/squashfs/LiveOS/rootfs.img ]; then
-        losetup -r $BASE_LOOPDEV /run/initramfs/squashfs/LiveOS/rootfs.img
-    fi
-
-    umount -l /run/initramfs/squashfs
-
-    do_live_from_base_loop
 fi
 
+# we might have an embedded fs image to use as rootfs (uncompressed live)
+if [ -e /run/initramfs/live/${live_dir}/ext3fs.img ]; then
+    FSIMG="/run/initramfs/live/${live_dir}/ext3fs.img"
+elif [ -e /run/initramfs/live/${live_dir}/rootfs.img ]; then
+    FSIMG="/run/initramfs/live/${live_dir}/rootfs.img"
+elif [ -f /run/initramfs/squashfs/LiveOS/ext3fs.img ]; then
+    FSIMG="/run/initramfs/squashfs/LiveOS/ext3fs.img"
+elif [ -f /run/initramfs/squashfs/LiveOS/rootfs.img ]; then
+    FSIMG="/run/initramfs/squashfs/LiveOS/rootfs.img"
+fi
+
+if [ -n "$FSIMG" ] ; then
+    BASE_LOOPDEV=$( losetup -f )
+
+    if [ -n "$writable_fsimg" ] ; then
+        # mount the provided fileysstem read/write
+        echo "Unpacking live filesystem (may take some time)"
+        mkdir /run/initramfs/fsimg/
+        if [ -n "$SQUASHED" ]; then
+            cp -v $FSIMG /run/initramfs/fsimg/rootfs.img
+        else
+            unpack_archive $FSIMG /run/initramfs/fsimg/
+        fi
+        losetup $BASE_LOOPDEV /run/initramfs/fsimg/rootfs.img
+        echo "0 $( blockdev --getsize $BASE_LOOPDEV ) linear $BASE_LOOPDEV 0" | dmsetup create live-rw
+    else
+        # mount the filesystem read-only and add a dm snapshot for writes
+        losetup -r $BASE_LOOPDEV $FSIMG
+        do_live_from_base_loop
+    fi
+fi
+
+[ -e "$SQUASHED" ] && umount -l /run/initramfs/squashfs
+
 if [ -b "$OSMIN_LOOPDEV" ]; then
     # set up the devicemapper snapshot device, which will merge
     # the normal live fs image, and the delta, into a minimzied fs image
@@ -239,7 +268,10 @@ if [ -n "$ROOTFLAGS" ]; then
 fi
 
 ln -s /dev/mapper/live-rw /dev/root
-printf 'mount %s /dev/mapper/live-rw %s\n' "$ROOTFLAGS" "$NEWROOT" > $hookdir/mount/01-$$-live.sh
+
+if [ -z "$DRACUT_SYSTEMD" ]; then
+    printf 'mount %s /dev/mapper/live-rw %s\n' "$ROOTFLAGS" "$NEWROOT" > $hookdir/mount/01-$$-live.sh
+fi
 
 need_shutdown
 

modules.d/90dmsquash-live/module-setup.sh

@@ -22,7 +22,7 @@ installkernel() {
 
 # called by dracut
 install() {
-    inst_multiple umount dmsetup blkid dd losetup grep blockdev
+    inst_multiple umount dmsetup blkid dd losetup grep blockdev find
     inst_multiple -o checkisomd5
     inst_hook cmdline 30 "$moddir/parse-dmsquash-live.sh"
     inst_hook cmdline 31 "$moddir/parse-iso-scan.sh"
@@ -31,6 +31,7 @@ install() {
     inst_hook pre-pivot 20 "$moddir/apply-live-updates.sh"
     inst_script "$moddir/dmsquash-live-root.sh" "/sbin/dmsquash-live-root"
     inst_script "$moddir/iso-scan.sh" "/sbin/iso-scan"
+    inst_script "$moddir/dmsquash-generator.sh" $systemdutildir/system-generators/dracut-dmsquash-generator
     # should probably just be generally included
     inst_rules 60-cdrom_id.rules
     inst_simple "$moddir/checkisomd5@.service" "/etc/systemd/system/checkisomd5@.service"

modules.d/90dmsquash-live/parse-dmsquash-live.sh

@@ -13,7 +13,7 @@ if [ "${root%%:*}" = "live" ] ; then
     liveroot=$root
 fi
 
-[ "${liveroot%%:*}" = "live" ] || return
+[ "${liveroot%%:*}" = "live" ] || return 1
 
 modprobe -q loop
 
@@ -49,9 +49,14 @@ case "$liveroot" in
     live:/*.[Ii][Mm][Gg]|/*.[Ii][Mm][Gg])
         [ -f "${root#live:}" ] && rootok=1 ;;
 esac
+
+[ "$rootok" = "1" ] || return 1
+
 info "root was $liveroot, is now $root"
 
 # make sure that init doesn't complain
 [ -z "$root" ] && root="live"
 
 wait_for_dev -n /dev/mapper/live-rw
+
+return 0

modules.d/90kernel-modules/module-setup.sh

@@ -4,12 +4,12 @@
 installkernel() {
     if [[ -z $drivers ]]; then
         block_module_filter() {
-            local _blockfuncs='ahci_platform_get_resources|ata_scsi_ioctl|scsi_add_host|blk_cleanup_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device|usb_stor_disconnect|mmc_add_host|sdhci_pltfm_init'
+            local _blockfuncs='ahci_platform_get_resources|ata_scsi_ioctl|scsi_add_host|blk_cleanup_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device|usb_stor_disconnect|mmc_add_host|sdhci_add_host'
             # subfunctions inherit following FDs
             local _merge=8 _side2=9
             function bmf1() {
                 local _f
-                while read _f; do case "$_f" in
+                while read _f || [ -n "$_f" ]; do case "$_f" in
                     *.ko)    [[ $(<         $_f) =~ $_blockfuncs ]] && echo "$_f" ;;
                     *.ko.gz) [[ $(gzip -dc <$_f) =~ $_blockfuncs ]] && echo "$_f" ;;
                     *.ko.xz) [[ $(xz -dc   <$_f) =~ $_blockfuncs ]] && echo "$_f" ;;
@@ -19,7 +19,7 @@ installkernel() {
             }
             function rotor() {
                 local _f1 _f2
-                while read _f1; do
+                while read _f1 || [ -n "$_f1" ]; do
                     echo "$_f1"
                     if read _f2; then
                         echo "$_f2" 1>&${_side2}
@@ -39,13 +39,15 @@ installkernel() {
             ehci-hcd ehci-pci ehci-platform \
             ohci-hcd ohci-pci \
             uhci-hcd \
-            xhci-hcd
+            xhci-hcd xhci-pci xhci-plat-hcd
 
-        instmods yenta_socket scsi_dh_rdac scsi_dh_emc \
-            atkbd i8042 usbhid hid-apple hid-sunplus hid-cherry hid-logitech \
-            hid-logitech-dj hid-microsoft hid-lcpower firewire-ohci \
-            pcmcia usb_storage nvme hid-hyperv hv-vmbus \
-            sdhci_acpi hyperv-keyboard
+        instmods \
+            "=drivers/hid" \
+            "=drivers/input/serio" \
+            "=drivers/input/keyboard"
+
+        instmods yenta_socket scsi_dh_rdac scsi_dh_emc scsi_dh_alua \
+                 atkbd i8042 usbhid firewire-ohci pcmcia hv-vmbus
 
         if [[ "$(uname -p)" == arm* ]]; then
             # arm specific modules

modules.d/90kernel-network-modules/module-setup.sh

@@ -0,0 +1,71 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    return 255
+}
+
+# called by dracut
+depends() {
+    return 0
+}
+
+# called by dracut
+installkernel() {
+    # Include wired net drivers, excluding wireless
+    local _arch=$(uname -m)
+
+    net_module_filter() {
+        local _net_drivers='eth_type_trans|register_virtio_device|usbnet_open'
+        local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
+        local _ret
+        # subfunctions inherit following FDs
+        local _merge=8 _side2=9
+        function nmf1() {
+            local _fname _fcont
+            while read _fname; do
+                [[ $_fname =~ $_unwanted_drivers ]] && continue
+                case "$_fname" in
+                    *.ko)    _fcont="$(<        $_fname)" ;;
+                    *.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
+                    *.ko.xz) _fcont="$(xz -dc   $_fname)" ;;
+                esac
+                [[   $_fcont =~ $_net_drivers
+                && ! $_fcont =~ iw_handler_get_spy ]] \
+                && echo "$_fname"
+            done
+            return 0
+        }
+        function rotor() {
+            local _f1 _f2
+            while read _f1; do
+                echo "$_f1"
+                if read _f2; then
+                    echo "$_f2" 1>&${_side2}
+                fi
+            done | nmf1 1>&${_merge}
+            return 0
+        }
+        # Use two parallel streams to filter alternating modules.
+        set +x
+        eval "( ( rotor ) ${_side2}>&1 | nmf1 ) ${_merge}>&1"
+        [[ $debug ]] && set -x
+        return 0
+    }
+
+    { find_kernel_modules_by_path drivers/net; if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then find_kernel_modules_by_path drivers/s390/net; fi; } \
+        | net_module_filter | instmods
+
+    #instmods() will take care of hostonly
+    instmods \
+        =drivers/net/phy \
+        =drivers/net/team \
+        =drivers/net/ethernet \
+        ecb arc4 bridge stp llc ipv6 bonding 8021q af_packet virtio_net
+}
+
+# called by dracut
+install() {
+    return 0
+}
+

modules.d/90lvm/lvm_scan.sh

@@ -106,6 +106,10 @@ if [ -n "$LVS" ] ; then
     info "Scanning devices $lvmdevs for LVM logical volumes $LVS"
     lvm lvscan --ignorelockingfailure 2>&1 | vinfo
     for LV in $LVS; do
+        if [ "x$(lvm lvs --noheadings --select "lv_attr =~ k" $LV | wc -l)" = "x0" ]; then
+            info "Skipping activation of '$LV' because activationskip is set."
+            continue
+        fi
         if [ -z "$sysinit" ]; then
             lvm lvchange --yes -ay --ignorelockingfailure $nopoll --ignoremonitoring $LV 2>&1 | vinfo
         else

modules.d/90lvm/module-setup.sh

@@ -42,6 +42,10 @@ cmdline() {
     done
 }
 
+installkernel() {
+    instmods dm-snapshot
+}
+
 # called by dracut
 install() {
     local _i
@@ -49,8 +53,8 @@ install() {
     inst lvm
 
     if [[ $hostonly_cmdline == "yes" ]]; then
-        cmdline >> "${initdir}/etc/cmdline.d/90lvm.conf"
-        echo >> "${initdir}/etc/cmdline.d/90lvm.conf"
+        local _lvmconf=$(cmdline)
+        [[ $_lvmconf ]] && printf "%s\n" "$_lvmconf" >> "${initdir}/etc/cmdline.d/90lvm.conf"
     fi
 
     inst_rules "$moddir/64-lvm.rules"
@@ -63,6 +67,20 @@ install() {
             sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 4/' ${initdir}/etc/lvm/lvm.conf
             sed -i -e 's/\(^[[:space:]]*\)use_lvmetad[[:space:]]*=[[:space:]]*[[:digit:]]/\1use_lvmetad = 0/' ${initdir}/etc/lvm/lvm.conf
         fi
+
+        export LVM_SUPPRESS_FD_WARNINGS=1
+        # Also install any files needed for LVM system id support.
+        if [ -f /etc/lvm/lvmlocal.conf ]; then
+            inst_simple -H /etc/lvm/lvmlocal.conf
+        fi
+        eval $(lvm dumpconfig global/system_id_source)
+        if [ "$system_id_source" == "file" ]; then
+            eval $(lvm dumpconfig global/system_id_file)
+            if [ -f "$system_id_file" ]; then
+                inst_simple -H $system_id_file
+            fi
+        fi
+        unset LVM_SUPPRESS_FD_WARNINGS
     fi
 
     if ! [[ -e ${initdir}/etc/lvm/lvm.conf ]]; then
@@ -107,12 +125,19 @@ install() {
             dev=$(</sys/block/${dev#/dev/}/dm/name)
             eval $(dmsetup splitname --nameprefixes --noheadings --rows "$dev" 2>/dev/null)
             [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || continue
-            if [[ "$(lvs --noheadings -o segtype ${DM_VG_NAME} 2>/dev/null)" == *thin* ]] ; then
-                inst_multiple -o thin_dump thin_restore thin_check thin_repair
-                break
-            fi
+            case "$(lvs --noheadings -o segtype ${DM_VG_NAME} 2>/dev/null)" in
+                *thin*|*cache*|*era*)
+                    inst_multiple -o thin_dump thin_restore thin_check thin_repair \
+                                  cache_dump cache_restore cache_check cache_repair \
+                                  era_check era_dump era_invalidate era_restore
+                    break;;
+            esac
         done
-    else
-        inst_multiple -o thin_dump thin_restore thin_check thin_repair
+    fi
+
+    if ! [[ $hostonly ]]; then
+        inst_multiple -o thin_dump thin_restore thin_check thin_repair \
+                      cache_dump cache_restore cache_check cache_repair \
+                      era_check era_dump era_invalidate era_restore
     fi
 }

modules.d/90mdraid/mdraid_start.sh

@@ -27,6 +27,7 @@ _md_force_run() {
 
         _path_d="${_path_s%/*}/degraded"
         [ ! -r "$_path_d" ] && continue
+        > $hookdir/initqueue/work
     done
 }
 

modules.d/90mdraid/module-setup.sh

@@ -46,7 +46,7 @@ cmdline() {
 
         UUID=$(
             /sbin/mdadm --examine --export $dev \
-                | while read line; do
+                | while read line || [ -n "$line" ]; do
                 [[ ${line#MD_UUID=} = $line ]] && continue
                 printf "%s" "${line#MD_UUID=} "
             done
@@ -71,8 +71,8 @@ install() {
     inst $(command -v mdadm) /sbin/mdadm
 
     if [[ $hostonly_cmdline == "yes" ]]; then
-        cmdline  >> "${initdir}/etc/cmdline.d/90mdraid.conf"
-        echo  >> "${initdir}/etc/cmdline.d/90mdraid.conf"
+        local _raidconf=$(cmdline)
+        [[ $_raidconf ]] && printf "%s\n" "$_raidconf" >> "${initdir}/etc/cmdline.d/90mdraid.conf"
     fi
 
     # <mdadm-3.3 udev rule
@@ -86,7 +86,7 @@ install() {
     for rule in 64-md-raid.rules 64-md-raid-assembly.rules; do
         rule_path="${initdir}${udevdir}/rules.d/${rule}"
         [ -f "${rule_path}" ] && sed -i -r \
-            -e '/RUN\+?="[[:alpha:]/]*mdadm[[:blank:]]+(--incremental|-I)[[:blank:]]+(\$env\{DEVNAME\}|\$tempnode|\$devnode)/d' \
+            -e '/(RUN|IMPORT\{program\})\+?="[[:alpha:]/]*mdadm[[:blank:]]+(--incremental|-I)[[:blank:]]+(--export )?(\$env\{DEVNAME\}|\$tempnode|\$devnode)/d' \
             "${rule_path}"
     done
 

modules.d/90mdraid/parse-md.sh

@@ -10,7 +10,7 @@ else
     if [ -n "$MD_UUID" ]; then
         for f in /etc/udev/rules.d/65-md-incremental*.rules; do
             [ -e "$f" ] || continue
-            while read line; do
+            while read line || [ -n "$line" ]; do
                 if [ "${line%%UUID CHECK}" != "$line" ]; then
                     printf 'IMPORT{program}="/sbin/mdadm --examine --export $tempnode"\n'
                     for uuid in $MD_UUID; do

modules.d/90multipath/module-setup.sh

@@ -27,6 +27,15 @@ depends() {
     return 0
 }
 
+# called by dracut
+cmdline() {
+    for m in scsi_dh_alua scsi_dh_emc scsi_dh_rdac ; do
+        if module_is_host_only $m ; then
+            printf 'rd.driver.pre=%s ' "$m"
+        fi
+    done
+}
+
 # called by dracut
 installkernel() {
     local _ret
@@ -37,7 +46,7 @@ installkernel() {
         local _merge=8 _side2=9
         function bmf1() {
             local _f
-            while read _f; do
+            while read _f || [ -n "$_f" ]; do
                 case "$_f" in
                     *.ko)    [[ $(<         $_f) =~ $_funcs ]] && echo "$_f" ;;
                     *.ko.gz) [[ $(gzip -dc <$_f) =~ $_funcs ]] && echo "$_f" ;;
@@ -49,7 +58,7 @@ installkernel() {
 
         function rotor() {
             local _f1 _f2
-            while read _f1; do
+            while read _f1 || [ -n "$_f1" ]; do
                 echo "$_f1"
                 if read _f2; then
                     echo "$_f2" 1>&${_side2}
@@ -87,12 +96,17 @@ install() {
     inst $(command -v partx) /sbin/partx
 
     inst_libdir_file "libmultipath*" "multipath/*"
+    inst_libdir_file 'libgcc_s.so*'
+
+    if [[ $hostonly_cmdline ]] ; then
+        local _conf=$(cmdline)
+        [[ $_conf ]] && echo "$_conf" >> "${initdir}/etc/cmdline.d/90multipath.conf"
+    fi
 
     if dracut_module_included "systemd"; then
-        inst_multiple \
-            $systemdsystemunitdir/multipathd.service
-        mkdir -p "${initdir}${systemdsystemconfdir}/sysinit.target.wants"
-        ln -rfs "${initdir}${systemdsystemunitdir}/multipathd.service" "${initdir}${systemdsystemconfdir}/sysinit.target.wants/multipathd.service"
+        inst_simple "${moddir}/multipathd.service" "${systemdsystemunitdir}/multipathd.service"
+        mkdir -p "${initdir}${systemdsystemunitdir}/sysinit.target.wants"
+        ln -rfs "${initdir}${systemdsystemunitdir}/multipathd.service" "${initdir}${systemdsystemunitdir}/sysinit.target.wants/multipathd.service"
     else
         inst_hook pre-trigger 02 "$moddir/multipathd.sh"
         inst_hook cleanup   02 "$moddir/multipathd-stop.sh"
@@ -100,6 +114,9 @@ install() {
 
     inst_hook cleanup   80 "$moddir/multipathd-needshutdown.sh"
 
-    inst_rules 40-multipath.rules 62-multipath.rules 65-multipath.rules 66-kpartx.rules
+    inst_rules 40-multipath.rules 56-multipath.rules \
+	62-multipath.rules 65-multipath.rules \
+	66-kpartx.rules 67-kpartx-compat.rules \
+	11-dm-mpath.rules
 }
 

modules.d/90multipath/multipathd.service

@@ -0,0 +1,19 @@
+[Unit]
+Description=Device-Mapper Multipath Device Controller
+Before=iscsi.service iscsid.service lvm2-activation-early.service
+DefaultDependencies=no
+Conflicts=shutdown.target
+ConditionKernelCommandLine=!nompath
+ConditionKernelCommandLine=!rd.multipath=0
+ConditionKernelCommandLine=!rd_NO_MULTIPATH
+ConditionPathExists=/etc/multipath.conf
+
+[Service]
+Type=simple
+ExecStartPre=/sbin/modprobe dm-multipath
+ExecStart=/sbin/multipathd -s -d
+ExecReload=/sbin/multipathd reconfigure
+ExecStop=/sbin/multipathd shutdown
+
+[Install]
+WantedBy=sysinit.target

modules.d/90multipath/multipathd.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-if [ -e /etc/multipath.conf ]; then
+if getargbool 1 rd.multipath -d -n rd_NO_MULTIPATH && [ -e /etc/multipath.conf ]; then
     modprobe dm-multipath
     multipathd -B || multipathd
     need_shutdown

modules.d/90qemu/module-setup.sh

@@ -25,5 +25,5 @@ installkernel() {
         hostonly='' instmods \
             ata_piix ata_generic pata_acpi cdrom sr_mod ahci \
             virtio_blk virtio virtio_ring virtio_pci \
-            virtio_scsi virtio_console
+            virtio_scsi virtio_console virtio_rng
 }

modules.d/91crypt-loop/crypt-loop-lib.sh

@@ -19,8 +19,6 @@ loop_decrypt() {
     local key="/dev/mapper/${mntp##*/}"
 
     if [ ! -b $key ]; then
-        info "Keyfile has .img suffix, treating it as LUKS-encrypted loop keyfile container to unlock $device"
-
         local loopdev=$(losetup -f "${mntp}/${keypath}" --show)
         local opts="-d - luksOpen $loopdev ${key##*/}"
 
@@ -29,14 +27,12 @@ loop_decrypt() {
             --prompt "Password ($keypath on $keydev for $device)" \
             --tty-echo-off
 
-        [ -b $key ] || die "Tried setting it up, but keyfile block device was still not found!" 
+        [ -b $key ] || die "Failed to unlock $keypath on $keydev for $device."
 
         initqueue --onetime --finished --unique --name "crypt-loop-cleanup-10-${key##*/}" \
             $(command -v cryptsetup) "luksClose $key"
         initqueue --onetime --finished --unique --name "crypt-loop-cleanup-20-${loopdev##*/}" \
             $(command -v losetup) "-d $loopdev"
-    else
-        info "Existing keyfile found, re-using it for $device"
     fi
 
     cat $key

modules.d/91crypt-loop/module-setup.sh

@@ -14,7 +14,7 @@ depends() {
 
 # called by dracut
 installkernel() {
-    instmods loop
+    hostonly='' instmods loop
 }
 
 # called by dracut

modules.d/95debug/module-setup.sh

@@ -13,9 +13,11 @@ depends() {
 
 # called by dracut
 install() {
-    inst_multiple -o ps grep more cat rm strace free showmount \
-        ping netstat rpcinfo vi scp ping6 ssh \
-        fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
+    inst_multiple -o cat ls ps grep more cat rm strace free showmount \
+                  ping netstat rpcinfo vi scp ping6 ssh find vi \
+                  tcpdump cp less hostname mkdir \
+                  fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
 
+    egrep '^tcpdump:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
 }
 

modules.d/95fcoe-uefi/module-setup.sh

@@ -2,6 +2,9 @@
 
 # called by dracut
 check() {
+    [[ $hostonly ]] || [[ $mount_needs ]] && {
+        [ -d /sys/firmware/efi ] || return 255
+    }
     require_binaries dcbtool fipvlan lldpad ip readlink || return 1
     return 0
 }

modules.d/95fcoe/fcoe-up.sh

@@ -16,16 +16,20 @@ type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
 netif=$1
 dcb=$2
 
+iflink=$(cat /sys/class/net/$netif/iflink)
+ifindex=$(cat /sys/class/net/$netif/ifindex)
+if [ "$iflink" != "$ifindex" ] ; then
+    # Skip VLAN devices
+    exit 0
+fi
+
+ip link set dev $netif up
 linkup "$netif"
 
 netdriver=$(readlink -f /sys/class/net/$netif/device/driver)
 netdriver=${netdriver##*/}
 
 if [ "$dcb" = "dcb" ]; then
-    # Note lldpad will stay running after switchroot, the system initscripts
-    # are to kill it and start a new lldpad to take over. Data is transfered
-    # between the 2 using a shm segment
-    lldpad -d
     # wait for lldpad to be ready
     i=0
     while [ $i -lt 60 ]; do
@@ -35,10 +39,6 @@ if [ "$dcb" = "dcb" ]; then
         i=$(($i+1))
     done
 
-    # on some systems lldpad needs some time
-    # sleep until we find a better solution
-    sleep 30
-
     while [ $i -lt 60 ]; do
         dcbtool sc "$netif" dcb on && break
         info "Retrying to turn dcb on"

modules.d/95fcoe/lldpad.sh

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+# Note lldpad will stay running after switchroot, the system initscripts
+# are to kill it and start a new lldpad to take over. Data is transfered
+# between the 2 using a shm segment
+lldpad -d
+# wait for lldpad to be ready
+i=0
+while [ $i -lt 60 ]; do
+    lldptool -p && break
+    info "Waiting for lldpad to be ready"
+    sleep 1
+    i=$(($i+1))
+done

modules.d/95fcoe/module-setup.sh

@@ -2,7 +2,16 @@
 
 # called by dracut
 check() {
+    [[ $hostonly ]] || [[ $mount_needs ]] && {
+        for c in /sys/bus/fcoe/devices/ctlr_* ; do
+            [ -L $c ] || continue
+            fcoe_ctlr=$c
+        done
+        [ -z "$fcoe_ctlr" ] && return 255
+    }
+
     require_binaries dcbtool fipvlan lldpad ip readlink || return 1
+
     return 0
 }
 
@@ -17,15 +26,59 @@ installkernel() {
     instmods fcoe 8021q edd
 }
 
+get_vlan_parent() {
+    local link=$1
+
+    [ -d $link ] || return
+    read iflink < $link/iflink
+    for if in /sys/class/net/* ; do
+	read idx < $if/ifindex
+	if [ $idx -eq $iflink ] ; then
+	    echo ${if##*/}
+	fi
+    done
+}
+
+# called by dracut
+cmdline() {
+
+    for c in /sys/bus/fcoe/devices/ctlr_* ; do
+        [ -L $c ] || continue
+        read enabled < $c/enabled
+        [ $enabled -eq 0 ] && continue
+        d=$(cd -P $c; echo $PWD)
+        i=${d%/*}
+        read mac < ${i}/address
+        s=$(dcbtool gc ${i##*/} dcb | sed -n 's/^DCB State:\t*\(.*\)/\1/p')
+        if [ -z "$s" ] ; then
+	    p=$(get_vlan_parent ${i})
+	    if [ "$p" ] ; then
+	        s=$(dcbtool gc ${p} dcb | sed -n 's/^DCB State:\t*\(.*\)/\1/p')
+	    fi
+        fi
+        if [ "$s" = "on" ] ; then
+	    dcb="dcb"
+        else
+	    dcb="nodcb"
+        fi
+        echo "fcoe=${mac}:${dcb}"
+    done
+}
+
 # called by dracut
 install() {
     inst_multiple ip dcbtool fipvlan lldpad readlink lldptool
 
     mkdir -m 0755 -p "$initdir/var/lib/lldpad"
 
+    if [[ $hostonly_cmdline == "yes" ]] ; then
+        local _fcoeconf=$(cmdline)
+        [[ $_fcoeconf ]] && printf "%s\n" "$_fcoeconf" >> "${initdir}/etc/cmdline.d/95fcoe.conf"
+    fi
     inst "$moddir/fcoe-up.sh" "/sbin/fcoe-up"
     inst "$moddir/fcoe-edd.sh" "/sbin/fcoe-edd"
     inst "$moddir/fcoe-genrules.sh" "/sbin/fcoe-genrules.sh"
+    inst_hook pre-trigger 03 "$moddir/lldpad.sh"
     inst_hook cmdline 99 "$moddir/parse-fcoe.sh"
     dracut_need_initqueue
 }

modules.d/95fcoe/parse-fcoe.sh

@@ -20,14 +20,11 @@
 
 
 # BRCM: Later, should check whether bnx2x is loaded first before loading bnx2fc so do not load bnx2fc when there are no Broadcom adapters
-[ -e /sys/module/fcoe/parameters/create ] || modprobe -a fcoe || die "FCoE requested but kernel/initrd does not support FCoE"
+[ -d /sys/module/fcoe ] || modprobe -b -a fcoe || die "FCoE requested but kernel/initrd does not support FCoE"
 
-modprobe bnx2fc >/dev/null 2>&1
+initqueue --onetime modprobe -b -q bnx2fc
 udevadm settle --timeout=30
 
-# FCoE actually supported?
-[ -e /sys/module/fcoe/parameters/create ] || modprobe fcoe || die "FCoE requested but kernel/initrd does not support FCoE"
-
 parse_fcoe_opts() {
     local IFS=:
     set $fcoe

modules.d/95fstab-sys/mount-sys.sh

@@ -7,7 +7,7 @@ fstab_mount() {
     local _dev _mp _fs _opts _dump _pass _rest
     test -e "$1" || return 1
     info "Mounting from $1"
-    while read _dev _mp _fs _opts _dump _pass _rest; do
+    while read _dev _mp _fs _opts _dump _pass _rest || [ -n "$_dev" ]; do
         [ -z "${_dev%%#*}" ] && continue # Skip comment lines
         ismounted $_mp && continue # Skip mounted filesystem
         if [ "$_pass" -gt 0 ] && ! strstr "$_opts" _netdev; then

modules.d/95iscsi/iscsiroot.sh

@@ -81,23 +81,23 @@ handle_netroot()
     local p
 
     # override conf settings by command line options
-    arg=$(getargs rd.iscsi.initiator -d iscsi_initiator=)
+    arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=)
     [ -n "$arg" ] && iscsi_initiator=$arg
-    arg=$(getargs rd.iscsi.target.name -d iscsi_target_name=)
+    arg=$(getarg rd.iscsi.target.name -d iscsi_target_name=)
     [ -n "$arg" ] && iscsi_target_name=$arg
-    arg=$(getargs rd.iscsi.target.ip -d iscsi_target_ip)
+    arg=$(getarg rd.iscsi.target.ip -d iscsi_target_ip)
     [ -n "$arg" ] && iscsi_target_ip=$arg
-    arg=$(getargs rd.iscsi.target.port -d iscsi_target_port=)
+    arg=$(getarg rd.iscsi.target.port -d iscsi_target_port=)
     [ -n "$arg" ] && iscsi_target_port=$arg
-    arg=$(getargs rd.iscsi.target.group -d iscsi_target_group=)
+    arg=$(getarg rd.iscsi.target.group -d iscsi_target_group=)
     [ -n "$arg" ] && iscsi_target_group=$arg
-    arg=$(getargs rd.iscsi.username -d iscsi_username=)
+    arg=$(getarg rd.iscsi.username -d iscsi_username=)
     [ -n "$arg" ] && iscsi_username=$arg
-    arg=$(getargs rd.iscsi.password -d iscsi_password)
+    arg=$(getarg rd.iscsi.password -d iscsi_password)
     [ -n "$arg" ] && iscsi_password=$arg
-    arg=$(getargs rd.iscsi.in.username -d iscsi_in_username=)
+    arg=$(getarg rd.iscsi.in.username -d iscsi_in_username=)
     [ -n "$arg" ] && iscsi_in_username=$arg
-    arg=$(getargs rd.iscsi.in.password -d iscsi_in_password=)
+    arg=$(getarg rd.iscsi.in.password -d iscsi_in_password=)
     [ -n "$arg" ] && iscsi_in_password=$arg
     for p in $(getargs rd.iscsi.param -d iscsi_param); do
 	iscsi_param="$iscsi_param --param $p"
@@ -123,7 +123,7 @@ handle_netroot()
 
     if [ -z $iscsi_initiator ]; then
        if [ -f /sys/firmware/ibft/initiator/initiator-name ]; then
-           iscsi_initiator=$(while read line; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
+           iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
        fi
     fi
 

modules.d/95iscsi/module-setup.sh

@@ -28,6 +28,127 @@ check() {
     return 0
 }
 
+get_ibft_mod() {
+    local ibft_mac=$1
+    local iface_mac iface_mod
+    # Return the iSCSI offload module for a given MAC address
+    for iface_desc in $(iscsiadm -m iface | cut -f 2 -d ' '); do
+        iface_mod=${iface_desc%%,*}
+        iface_mac=${iface_desc#*,}
+        iface_mac=${iface_mac%%,*}
+        if [ "$ibft_mac" = "$iface_mac" ] ; then
+            echo $iface_mod
+            return 0
+        fi
+    done
+}
+
+install_ibft() {
+    # When iBFT / iscsi_boot is detected:
+    # - Use 'ip=ibft' to set up iBFT network interface
+    #   Note: bnx2i is using a different MAC address of iSCSI offloading
+    #         so the 'ip=ibft' parameter must not be set
+    # - specify firmware booting cmdline parameter
+
+    for d in /sys/firmware/* ; do
+        if [ -d ${d}/ethernet0 ] ; then
+            read ibft_mac < ${d}/ethernet0/mac
+            ibft_mod=$(get_ibft_mod $ibft_mac)
+        fi
+        if [ -z "$ibft_mod" ] && [ -d ${d}/ethernet1 ] ; then
+            read ibft_mac < ${d}/ethernet1/mac
+            ibft_mod=$(get_ibft_mod $ibft_mac)
+        fi
+        if [ -d ${d}/initiator ] ; then
+            if [ ${d##*/} = "ibft" ] && [ "$ibft_mod" != "bnx2i" ] ; then
+                echo -n "ip=ibft "
+            fi
+            echo -n "rd.iscsi.firmware=1"
+        fi
+    done
+}
+
+install_iscsiroot() {
+    local devpath=$1
+    local scsi_path iscsi_lun session c d conn
+    local iscsi_session iscsi_address iscsi_port iscsi_targetname iscsi_tpgt
+
+    scsi_path=${devpath%%/block*}
+    [ "$scsi_path" = "$devpath" ] && return 1
+    iscsi_lun=${scsi_path##*:}
+    [ "$iscsi_lun" = "$scsi_path" ] && return 1
+    session=${devpath%%/target*}
+    [ "$session" = "$devpath" ] && return 1
+    iscsi_session=${session##*/}
+    [ "$iscsi_session" = "$session" ] && return 1
+
+    for d in ${session}/* ; do
+        case $d in
+	    *connection*)
+	        c=${d##*/}
+	        conn=${d}/iscsi_connection/${c}
+	        if [ -d ${conn} ] ; then
+		    iscsi_address=$(cat ${conn}/persistent_address)
+		    iscsi_port=$(cat ${conn}/persistent_port)
+	        fi
+	        ;;
+	    *session)
+	        if [ -d ${d}/${iscsi_session} ] ; then
+                    iscsi_initiator=$(cat ${d}/${iscsi_session}/initiatorname)
+		    iscsi_targetname=$(cat ${d}/${iscsi_session}/targetname)
+	        fi
+	        ;;
+        esac
+    done
+
+    [ -z "$iscsi_address" ] && return
+    local_address=$(ip -o route get to $iscsi_address | sed -n 's/.*src \([0-9a-f.:]*\).*/\1/p')
+    ifname=$(ip -o route get to $iscsi_address | sed -n 's/.*dev \([^ ]*\).*/\1/p')
+    printf 'ip=%s:static ' ${ifname}
+
+    if [ -e /sys/class/net/$ifname/address ] ; then
+        ifmac=$(cat /sys/class/net/$ifname/address)
+        printf 'ifname=%s:%s ' ${ifname} ${ifmac}
+    fi
+
+    if [ -n "$iscsi_address" -a -n "$iscsi_targetname" ] ; then
+        if [ -n "$iscsi_port" -a "$iscsi_port" -eq 3260 ] ; then
+            iscsi_port=
+        fi
+        if [ -n "$iscsi_lun" -a "$iscsi_lun" -eq 0 ] ; then
+            iscsi_lun=
+        fi
+        # In IPv6 case rd.iscsi.initatior= must pass address in [] brackets
+        case "$iscsi_address" in
+            *:*)
+                iscsi_address="[$iscsi_address]"
+                ;;
+        esac
+        # Must be two separate lines, so that "sort | uniq" commands later
+        # can sort out rd.iscsi.initiator= duplicates
+        echo "rd.iscsi.initiator=${iscsi_initiator}"
+        echo "netroot=iscsi:${iscsi_address}::${iscsi_port}:${iscsi_lun}:${iscsi_targetname}"
+    fi
+    return 0
+}
+
+
+install_softiscsi() {
+    [ -d /sys/firmware/ibft ] && return 0
+
+    is_softiscsi() {
+        local _dev=$1
+        local iscsi_dev
+
+        [[ -L "/sys/dev/block/$_dev" ]] || return
+        iscsi_dev=$(cd -P /sys/dev/block/$_dev; echo $PWD)
+        install_iscsiroot $iscsi_dev
+    }
+
+    for_each_host_dev_and_slaves_all is_softiscsi || return 255
+    return 0
+}
+
 # called by dracut
 depends() {
     echo network rootfs-block
@@ -45,7 +166,7 @@ installkernel() {
         local _merge=8 _side2=9
         function bmf1() {
             local _f
-            while read _f; do
+            while read _f || [ -n "$_f" ]; do
                 case "$_f" in
                     *.ko)    [[ $(<         $_f) =~ $_funcs ]] && echo "$_f" ;;
                     *.ko.gz) [[ $(gzip -dc <$_f) =~ $_funcs ]] && echo "$_f" ;;
@@ -57,7 +178,7 @@ installkernel() {
 
         function rotor() {
             local _f1 _f2
-            while read _f1; do
+            while read _f1 || [ -n "$_f1" ]; do
                 echo "$_f1"
                 if read _f2; then
                     echo "$_f2" 1>&${_side2}
@@ -76,10 +197,30 @@ installkernel() {
     | iscsi_module_filter  |  instmods
 }
 
+# called by dracut
+cmdline() {
+    local _iscsiconf=$(install_ibft)
+    {
+        if [ "$_iscsiconf" ] ; then
+            echo ${_iscsiconf}
+        else
+            install_softiscsi
+        fi
+    } | sort | uniq
+}
+
 # called by dracut
 install() {
     inst_multiple umount iscsistart hostname iscsi-iname
     inst_multiple -o iscsiuio
+    inst_libdir_file 'libgcc_s.so*'
+
+    # Detect iBFT and perform mandatory steps
+    if [[ $hostonly_cmdline == "yes" ]] ; then
+        local _iscsiconf=$(cmdline)
+        [[ $_iscsiconf ]] && printf "%s\n" "$_iscsiconf" >> "${initdir}/etc/cmdline.d/95iscsi.conf"
+    fi
+
     inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh"
     inst_hook cleanup 90 "$moddir/cleanup-iscsi.sh"
     inst "$moddir/iscsiroot.sh" "/sbin/iscsiroot"

modules.d/95iscsi/parse-iscsiroot.sh

@@ -59,20 +59,16 @@ fi
 
 # iscsi_firmware does not need argument checking
 if [ -n "$iscsi_firmware" ] ; then
-    netroot=${netroot:-iscsi:}
-    modprobe -q iscsi_boot_sysfs 2>/dev/null
-    modprobe -q iscsi_ibft
-    initqueue --onetime --timeout /sbin/iscsiroot dummy "'$netroot'" "'$NEWROOT'"
+    [ -z "$netroot" ] && netroot=iscsi:
+    modprobe -b -q iscsi_boot_sysfs 2>/dev/null
+    modprobe -b -q iscsi_ibft
+    initqueue --onetime --timeout /sbin/iscsiroot dummy "$netroot" "$NEWROOT"
 fi
 
 # If it's not iscsi we don't continue
 [ "${netroot%%:*}" = "iscsi" ] || return
 
-modprobe -q qla4xxx
-modprobe -q cxgb3i
-modprobe -q cxgb4i
-modprobe -q bnx2i
-modprobe -q be2iscsi
+initqueue --onetime modprobe --all -b -q qla4xxx cxgb3i cxgb4i bnx2i be2iscsi
 
 if [ -z "$iscsi_firmware" ] ; then
     type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh
@@ -81,17 +77,21 @@ fi
 
 # ISCSI actually supported?
 if ! [ -e /sys/module/iscsi_tcp ]; then
-    modprobe -q iscsi_tcp || die "iscsiroot requested but kernel/initrd does not support iscsi"
+    modprobe -b -q iscsi_tcp || die "iscsiroot requested but kernel/initrd does not support iscsi"
 fi
 
 if [ -n "$netroot" ] && [ "$root" != "/dev/root" ] && [ "$root" != "dhcp" ]; then
     if ! getargbool 1 rd.neednet >/dev/null || ! getarg "ip="; then
-        initqueue --onetime --settled /sbin/iscsiroot dummy "'$netroot'" "'$NEWROOT'"
+        initqueue --onetime --settled /sbin/iscsiroot dummy "$netroot" "$NEWROOT"
     fi
 fi
 
-netroot_enc=$(str_replace "$netroot" '/' '\2f')
-echo "[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh
+if [ -n "$iscsi_firmware" ] ; then
+    echo "[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh
+else
+    netroot_enc=$(str_replace "$netroot" '/' '\2f')
+    echo "[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh
+fi
 
 # Done, all good!
 rootok=1

modules.d/95nbd/module-setup.sh

@@ -3,8 +3,6 @@
 # called by dracut
 check() {
     local _rootdev
-    # If our prerequisites are not met, fail.
-    require_binaries nbd-client || return 1
 
     # if an nbd device is not somewhere in the chain of devices root is
     # mounted on, fail the hostonly check.
@@ -15,6 +13,7 @@ check() {
         [[ -b /dev/block/$_rootdev ]] || return 1
         check_block_and_slaves is_nbd "$_rootdev" || return 255
     }
+    require_binaries nbd-client || return 1
 
     return 0
 }

modules.d/95nfs/module-setup.sh

@@ -14,7 +14,6 @@ check() {
         done
         return 255
     }
-
     return 0
 }
 
@@ -29,6 +28,43 @@ installkernel() {
     instmods nfs sunrpc ipv6 nfsv2 nfsv3 nfsv4 nfs_acl nfs_layout_nfsv41_files
 }
 
+cmdline() {
+    local nfs_device
+    local nfs_options
+    local nfs_root
+    local nfs_address
+    local lookup
+    local ifname
+
+    ### nfsroot= ###
+    nfs_device=$(findmnt -t nfs4 -n -o SOURCE /)
+    if [ -n "$nfs_device" ];then
+        nfs_root="root=nfs4:$nfs_device"
+    else
+        nfs_device=$(findmnt -t nfs -n -o SOURCE /)
+        [ -z "$nfs_device" ] && return
+        nfs_root="root=nfs:$nfs_device"
+    fi
+    nfs_options=$(findmnt -t nfs4,nfs -n -o OPTIONS /)
+    [ -n "$nfs_options" ] && nfs_root="$nfs_root:$nfs_options"
+    echo "$nfs_root"
+
+    ### ip= ###
+    if [[ $nfs_device = [0-9]*\.[0-9]*\.[0-9]*.[0-9]* ]] || [[ $nfs_device = \[.*\] ]]; then
+        nfs_address="$nfs_device"
+    else
+        lookup=$(host $(echo ${nfs_device%%:*})| head -n1)
+        nfs_address=${lookup##* }
+    fi
+    ifname=$(ip -o route get to $nfs_address | sed -n 's/.*dev \([^ ]*\).*/\1/p')
+    if [ -e /sys/class/net/$ifname/address ] ; then
+        ifmac=$(cat /sys/class/net/$ifname/address)
+        printf 'ifname=%s:%s ' ${ifname} ${ifmac}
+    fi
+
+    printf 'ip=%s:static\n' ${ifname}
+}
+
 # called by dracut
 install() {
     local _i
@@ -37,6 +73,11 @@ install() {
         mount.nfs4 umount rpc.idmapd sed /etc/netconfig
     inst_multiple /etc/services /etc/nsswitch.conf /etc/rpc /etc/protocols /etc/idmapd.conf
 
+    if [[ $hostonly_cmdline == "yes" ]]; then
+        local _netconf="$(cmdline)"
+        [[ $_netconf ]] && printf "%s\n" "$_netconf" >> "${initdir}/etc/cmdline.d/95nfs.conf"
+    fi
+
     if [ -f /lib/modprobe.d/nfs.conf ]; then
         inst_multiple /lib/modprobe.d/nfs.conf
     else
@@ -75,4 +116,3 @@ install() {
         && chown rpc.rpc "$initdir/var/lib/rpcbind"
     dracut_need_initqueue
 }
-

modules.d/95nfs/parse-nfsroot.sh

@@ -57,7 +57,14 @@ fi
 
 case "$netroot" in
     /dev/nfs) netroot=nfs;;
-    /dev/*) unset netroot; return;;
+    /dev/*)
+        if [ -n "$oldnetroot" ]; then
+            netroot="$oldnetroot"
+        else
+            unset netroot
+        fi
+	return
+	;;
     # LEGACY: root=<server-ip>:/<path
     [0-9]*:/*|[0-9]*\.[0-9]*\.[0-9]*[!:]|/*)
         netroot=nfs:$netroot;;

modules.d/95resume/module-setup.sh

@@ -29,8 +29,17 @@ install() {
     local _bin
 
     if [[ $hostonly_cmdline == "yes" ]]; then
-        cmdline  >> "${initdir}/etc/cmdline.d/95resume.conf"
-        echo  >> "${initdir}/etc/cmdline.d/95resume.conf"
+	local _resumeconf=$(cmdline)
+	[[ $_resumeconf ]] && printf "%s\n" "$_resumeconf" >> "${initdir}/etc/cmdline.d/95resume.conf"
+    fi
+
+    # if systemd is included and has the hibernate-resume tool, use it and nothing else
+    if dracut_module_included "systemd" && [[ -x $systemdutildir/systemd-hibernate-resume ]]; then
+        inst_multiple -o \
+                      $systemdutildir/system-generators/systemd-hibernate-resume-generator \
+                      $systemdsystemunitdir/systemd-hibernate-resume@.service \
+                      $systemdutildir/systemd-hibernate-resume
+        return 0
     fi
 
     # Optional uswsusp support

modules.d/95resume/parse-resume.sh

@@ -37,6 +37,8 @@ esac
 
 if ! getarg noresume; then
     if [ -n "$resume" ]; then
+        wait_for_dev /dev/resume
+
         {
             printf "KERNEL==\"%s\", ACTION==\"add|change\", SYMLINK+=\"resume\"\n" \
                 ${resume#/dev/};
@@ -65,7 +67,7 @@ if ! getarg noresume; then
             printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m  > /sys/power/resume"'
         } >> /etc/udev/rules.d/99-resume.rules
 
-        printf '[ -e "%s" ] && { ln -s "%s" /dev/resume; rm -f -- "$job" "%s/initqueue/timeout/resume.sh"; }\n' \
+        printf '[ -e "%s" ] && { ln -s "%s" /dev/resume 2> /dev/null; rm -f -- "$job" "%s/initqueue/timeout/resume.sh"; }\n' \
             "$resume" "$resume" "$hookdir" >> $hookdir/initqueue/settled/resume.sh
 
         {

modules.d/95rootfs-block/module-setup.sh

@@ -29,23 +29,36 @@ cmdline_journal() {
     return 0
 }
 
+cmdline_rootfs() {
+    local _dev=/dev/block/$(find_root_block_device)
+    local _fstype _flags _subvol
+    if [ -e $_dev ]; then
+        printf " root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$_dev")")"
+        _fstype="$(find_mp_fstype /)"
+        _flags="$(find_mp_fsopts /)"
+        printf " rootfstype=%s" "$_fstype"
+        if [[ $use_fstab != yes ]] && [[ $_fstype = btrfs ]]; then
+            _subvol=$(findmnt -e -v -n -o FSROOT --target /) \
+		&& _subvol=${_subvol#/}
+            _flags="$_flags,${_subvol:+subvol=$_subvol}"
+        fi
+        printf " rootflags=%s" "${_flags#,}"
+    fi
+}
+
 # called by dracut
 cmdline() {
-    local dev=/dev/block/$(find_root_block_device)
-    if [ -e $dev ]; then
-        printf " root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$dev")")"
-        printf " rootflags=%s" "$(find_mp_fsopts /)"
-        printf " rootfstype=%s" "$(find_mp_fstype /)"
-    fi
+    cmdline_rootfs
     cmdline_journal
 }
 
 # called by dracut
 install() {
     if [[ $hostonly_cmdline == "yes" ]]; then
-        cmdline_journal | while read journaldev; do
-            [[ $journaldev ]] && printf "%s\n" "$journaldev" >> "${initdir}/etc/cmdline.d/95root-journaldev.conf"
-        done
+        local _journaldev=$(cmdline_journal)
+        [[ $_journaldev ]] && printf "%s\n" "$_journaldev" >> "${initdir}/etc/cmdline.d/95root-journaldev.conf"
+        local _rootdev=$(cmdline_rootfs)
+        [[ $_rootdev ]] && printf "%s\n" "$_rootdev" >> "${initdir}/etc/cmdline.d/95root-dev.conf"
     fi
 
     inst_multiple umount

modules.d/95rootfs-block/mount-root.sh

@@ -81,7 +81,7 @@ mount_root() {
         # the root filesystem,
         # remount it with the proper options
         rootopts="defaults"
-        while read dev mp fs opts dump fsck; do
+        while read dev mp fs opts dump fsck || [ -n "$dev" ]; do
             # skip comments
             [ "${dev%%#*}" != "$dev" ] && continue
 

modules.d/95ssh-client/module-setup.sh

@@ -44,8 +44,8 @@ inst_sshenv()
     if [[ -f /etc/ssh/ssh_config ]]; then
         inst_simple /etc/ssh/ssh_config
         sed -i -e 's/\(^[[:space:]]*\)ProxyCommand/\1# ProxyCommand/' ${initdir}/etc/ssh/ssh_config
-        while read key val; do
-            [[ key != "GlobalKnownHostsFile" ]] && continue
+        while read key val || [ -n "$key" ]; do
+            [[ $key != "GlobalKnownHostsFile" ]] && continue
             inst_simple "$val"
             break
         done < /etc/ssh/ssh_config

modules.d/95udev-rules/module-setup.sh

@@ -7,8 +7,9 @@ install() {
     # Fixme: would be nice if we didn't have to guess, which rules to grab....
     # ultimately, /lib/initramfs/rules.d or somesuch which includes links/copies
     # of the rules we want so that we just copy those in would be best
-    inst_multiple udevadm cat uname blkid \
-        /etc/udev/udev.conf
+    inst_multiple udevadm cat uname blkid
+    inst_dir /etc/udev
+    inst_multiple -o /etc/udev/udev.conf
 
     [ -d ${initdir}/$systemdutildir ] || mkdir -p ${initdir}/$systemdutildir
     for _i in ${systemdutildir}/systemd-udevd ${udevdir}/udevd /sbin/udevd; do
@@ -25,15 +26,25 @@ install() {
         exit 1
     fi
 
-    inst_rules 50-udev-default.rules 60-persistent-storage.rules \
-        61-persistent-storage-edd.rules 80-drivers.rules 95-udev-late.rules \
-        60-pcmcia.rules \
-        50-udev.rules 95-late.rules \
+    inst_rules \
         50-firmware.rules \
+        50-udev.rules \
+        50-udev-default.rules \
+        55-scsi-sg3_id.rules \
+        58-scsi-sg3_symlink.rules \
         59-scsi-sg3_utils.rules \
-        70-uaccess.rules 71-seat.rules 73-seat-late.rules \
+        60-block.rules \
+        60-pcmcia.rules \
+        60-persistent-storage.rules \
+        61-persistent-storage-edd.rules \
+        70-uaccess.rules \
+        71-seat.rules \
+        73-seat-late.rules \
         75-net-description.rules \
-        80-net-name-slot.rules 80-net-setup-link.rules \
+        80-drivers.rules 95-udev-late.rules \
+        80-net-name-slot.rules\
+        80-net-setup-link.rules \
+        95-late.rules \
         "$moddir/59-persistent-storage.rules" \
         "$moddir/61-persistent-storage.rules"
 

modules.d/95virtfs/mount-virtfs.sh

@@ -42,7 +42,7 @@ mount_root() {
         # the root filesystem,
         # remount it with the proper options
         rootopts="defaults"
-        while read dev mp fs opts rest; do
+        while read dev mp fs opts rest || [ -n "$dev" ]; do
             # skip comments
             [ "${dev%%#*}" != "$dev" ] && continue
 

modules.d/98dracut-systemd/dracut-cmdline-ask.service

@@ -13,7 +13,7 @@ DefaultDependencies=no
 Before=dracut-cmdline.service
 After=systemd-journald.socket
 Wants=systemd-journald.socket
-ConditionPathExists=/etc/initrd-release
+ConditionPathExists=/usr/lib/initrd-release
 ConditionKernelCommandLine=rd.cmdline=ask
 
 [Service]

modules.d/98dracut-systemd/dracut-cmdline-ask.sh

@@ -10,7 +10,7 @@ echo
 echo
 echo
 echo "Enter additional kernel command line parameter (end with ctrl-d or .)"
-while read -e -p "> " line; do
+while read -e -p "> " line || [ -n "$line" ]; do
     [[ "$line" == "." ]] && break
     [[ "$line" ]] && printf -- "%s\n" "$line" >> /etc/cmdline.d/99-cmdline-ask.conf
 done

modules.d/98dracut-systemd/dracut-cmdline.service

@@ -14,7 +14,7 @@ DefaultDependencies=no
 Before=dracut-pre-udev.service
 After=systemd-journald.socket
 Wants=systemd-journald.socket
-ConditionPathExists=/etc/initrd-release
+ConditionPathExists=/usr/lib/initrd-release
 ConditionPathExistsGlob=|/etc/cmdline.d/*.conf
 ConditionDirectoryNotEmpty=|/lib/dracut/hooks/cmdline
 ConditionKernelCommandLine=|rd.break=cmdline

modules.d/98dracut-systemd/dracut-cmdline.sh

@@ -5,7 +5,7 @@ if [ -f /dracut-state.sh ]; then
 fi
 type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
 
-[ -f /etc/initrd-release ] && . /etc/initrd-release
+[ -f /usr/lib/initrd-release ] && . /usr/lib/initrd-release
 [ -n "$VERSION" ] && info "dracut-$VERSION"
 
 if ! getargbool 1 'rd.hostonly'; then