NEWS & AUTHORS update - 042

newer Fedora kernel install the kernel to /lib/modules

.dir-locals.el

@@ -1,2 +1,3 @@
-(setq sh-basic-offset: 4)
+((nil . ((setq sh-basic-offset: 4)
-(setq indent-tabs-mode nil)
+         (setq indent-tabs-mode nil)
+         )))

50-dracut.install

@@ -12,18 +12,20 @@ case "$COMMAND" in
         if [[ -f ${INITRD_IMAGE_PREGENERATED} ]]; then
             # we found an initrd at the same place as the kernel
             # use this and don't generate a new one
-            cp "$INITRD_IMAGE_PREGENERATED" "$BOOT_DIR_ABS/initrd" \
+            cp --reflink=auto "$INITRD_IMAGE_PREGENERATED" "$BOOT_DIR_ABS/initrd" \
                 && chown root:root "$BOOT_DIR_ABS/initrd" \
                 && chmod 0600 "$BOOT_DIR_ABS/initrd" \
                 && exit 0
         fi
 
         if [[ -f /etc/kernel/cmdline ]]; then
-            readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+            read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
+        elif [[ -f /usr/lib/kernel/cmdline ]]; then
+            read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
         fi
 
-        if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
+        if ! [[ ${BOOT_OPTIONS[*]} ]]; then
-            read -ar BOOT_OPTIONS < /proc/cmdline
+            read -r -d '' -a BOOT_OPTIONS < /proc/cmdline
         fi
 
         unset noimageifnotneeded

51-dracut-rescue-postinst.sh

@@ -57,7 +57,7 @@ if [[ ! -f $INITRDFILE ]]; then
 fi
 
 if [[ ! -f $NEW_KERNEL_IMAGE ]]; then
-    cp "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
+    cp --reflink=auto "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
     ((ret+=$?))
 fi
 

51-dracut-rescue.install

@@ -40,12 +40,22 @@ fi
 [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
 
 if [[ -f /etc/kernel/cmdline ]]; then
-    readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+    read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
+elif [[ -f /usr/lib/kernel/cmdline ]]; then
+    read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
 fi
+
 if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-    read -ar BOOT_OPTIONS < /proc/cmdline
+    read -r -d '' -a line < /proc/cmdline
+    for i in "${line[@]}"; do
+        [[ "${i#initrd=*}" != "$i" ]] && continue
+        BOOT_OPTIONS+=("$i")
+    done
 fi
-if ! [[ $BOOT_OPTIONS ]]; then
+
+if ! [[ ${BOOT_OPTIONS[*]} ]]; then
+    echo "Could not determine the kernel command line parameters." >&2
+    echo "Please specify the kernel command line in /etc/kernel/cmdline!" >&2
     exit 1
 fi
 
@@ -69,7 +79,7 @@ case "$COMMAND" in
 
         [[ -d "$BOOT_DIR_ABS" ]] || mkdir -p "$BOOT_DIR_ABS"
 
-        if ! cp "$KERNEL_IMAGE" "$BOOT_DIR_ABS"/linux; then
+        if ! cp --reflink=auto "$KERNEL_IMAGE" "$BOOT_DIR_ABS"/linux; then
             echo "Can't copy '$KERNEL_IMAGE to '$BOOT_DIR_ABS/linux'!" >&2
         fi
 

AUTHORS

@@ -9,8 +9,8 @@ Dave Young <dyoung@redhat.com>
 David Dillow <dave@thedillows.org>
 Hannes Reinecke <hare@suse.de>
 Michal Soltys <soltys@ziu.info>
-Amerigo Wang <amwang@redhat.com>
 Colin Guthrie <colin@mageia.org>
+Amerigo Wang <amwang@redhat.com>
 Thomas Renninger <trenn@suse.de>
 WANG Chao <chaowang@redhat.com>
 Andrey Borzenkov <arvidjaar@gmail.com>
@@ -27,12 +27,16 @@ Baoquan He <bhe@redhat.com>
 Leho Kraav <leho@kraav.com>
 Kamil Rytarowski <n54@gmx.com>
 Marc Grimme <grimme@atix.de>
+NeilBrown <neilb@suse.de>
 Peter Rajnoha <prajnoha@redhat.com>
 Radek Vykydal <rvykydal@redhat.com>
 Thorsten Behrens <tbehrens@suse.com>
 Chao Wang <chaowang@redhat.com>
 Colin Walters <walters@verbum.org>
+Cristian Rodríguez <crrodriguez@opensuse.org>
+Fabian Deutsch <fabiand@fedoraproject.org>
 Frederic Crozat <fcrozat@suse.com>
+James Lee <jlee@thestaticvoid.com>
 Jesse Keating <jkeating@redhat.com>
 Milan Broz <mbroz@redhat.com>
 Nicolas Chauvet <kwizart@gmail.com>
@@ -40,7 +44,6 @@ Roberto Sassu <roberto.sassu@polito.it>
 Anton Blanchard <anton@samba.org>
 Bill Nottingham <notting@redhat.com>
 Chapman Flack <g2@anastigmatix.net>
-Cristian Rodríguez <crrodriguez@opensuse.org>
 David Cantrell <dcantrell@redhat.com>
 Dennis Gilmore <dennis@ausil.us>
 Jon Ander Hernandez <jonan.h@gmail.com>
@@ -52,21 +55,24 @@ Peter Robinson <pbrobinson@gmail.com>
 Stefan Reimer <it@startux.de>
 Stig Telfer <stelfer@cray.com>
 Vasiliy Tolstov <v.tolstov@selfip.ru>
+Ville Skyttä <ville.skytta@iki.fi>
 Wim Muskee <wimmuskee@gmail.com>
 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
 Alan Pevec <apevec@redhat.com>
 Alex Harpin <development@landsofshadow.co.uk>
 Daniel Schaal <farbing@web.de>
+Erwan Velu <erwan.velu@enovance.com>
 Frederick Grose <fgrose@sugarlabs.org>
 Hari Bathini <hbathini@linux.vnet.ibm.com>
 Ian Dall <ian@beware.dropbear.id.au>
 James Buren <ryuo@frugalware.org>
-James Lee <jlee@thestaticvoid.com>
+Jan Synacek <jsynacek@redhat.com>
 Joey Boggs <jboggs@redhat.com>
 Koen Kooi <koen@dominion.thruhere.net>
 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 Kyle McMartin <kmcmarti@redhat.com>
 Lubomir Rintel <lkundrak@v3.sk>
+Lukas Wunner <lukas@wunner.de>
 Mike Snitzer <snitzer@redhat.com>
 Minfei Huang <mhuang@redhat.com>
 Przemysław Rudy <prudy1@o2.pl>
@@ -82,25 +88,29 @@ Anssi Hannula <anssi@mageia.org>
 Antony Messerli <amesserl@rackspace.com>
 Brandon Philips <brandon@ifup.co>
 Canek Peláez Valdés <caneko@gmail.com>
+Chao Fan <cfan@redhat.com>
 Chris Leech <cleech@redhat.com>
 Christian Heinz <christian.ch.heinz@gmail.com>
+Christian Rodrigues <crrodriguez@opensuse.org>
 Cong Wang <amwang@redhat.com>
 Daniel Drake <drake@endlessm.com>
 Dave Jones <davej@redhat.com>
 Dennis Schridde <devurandom@gmx.net>
+Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
 Duane Griffin <duaneg@dghda.com>
-Erwan Velu <erwan.velu@enovance.com>
+Gerd von Egidy <gerd.von.egidy@intra2net.com>
 Glen Gray <slaine@slaine.org>
 Hermann Gausterer <git-dracut-2012@mrq1.org>
 James Laska <jlaska@redhat.com>
 Jan Stodola <jstodola@redhat.com>
 Jiri Pirko <jiri@resnulli.us>
 Joe Lawrence <Joe.Lawrence@stratus.com>
+Jonas Jonsson <jonas@websystem.se>
 Julian Wolf <juwolf@suse.com>
 Kevin Yung <Kevin.Yung@myob.com>
 Lars R. Damerow <lars@pixar.com>
 Lennert Buytenhek <buytenh@wantstofly.org>
-Lukas Wunner <lukas@wunner.de>
+Lukas Nykryn <lnykryn@redhat.com>
 Major Hayden <major@mhtx.net>
 Marian Csontos <mcsontos@redhat.com>
 Marko Myllynen <myllynen@redhat.com>
@@ -108,8 +118,9 @@ Matt <smoothsailing72@hotmail.com>
 Matt Smith <shadowfax@gmx.com>
 Michal Schmidt <mschmidt@redhat.com>
 Mike Gorse <mgorse@suse.com>
+Moritz 'Morty' Strübe <morty@gmx.net>
 Munehiro Matsuda <haro@kgt.co.jp>
-NeilBrown <neilb@suse.de>
+Nikoli <nikoli@gmx.us>
 Nikoli <nikoli@lavabit.com>
 Olivier Blin <dev@blino.org>
 P J P <ppandit@redhat.com>
@@ -119,6 +130,7 @@ Praveen_Paladugu@Dell.com <Praveen_Paladugu@Dell.com>
 Pádraig Brady <P@draigBrady.com>
 Quentin Armitage <quentin@armitage.org.uk>
 Robert Buchholz <rbu@goodpoint.de>
+Rusty Bird <rustybird@openmailbox.org>
 Sergey Fionov <fionov@gmail.com>
 Shawn W Dunn <sfalken@opensuse.org>
 Srinivasa T N <seenutn@linux.vnet.ibm.com>
@@ -128,8 +140,8 @@ Tom Gundersen <teg@jklm.no>
 Tomasz Torcz <tomek@pipebreaker.pl>
 Vadim Kuznetsov <vadimk@gentoo.org>
 Vaughan Cao <vaughan.cao@oracle.com>
-Ville Skyttä <ville.skytta@iki.fi>
 Vratislav Podzimek <vpodzime@redhat.com>
 Yanko Kaneti <yaneti@declera.com>
 jloeser <jloeser@suse.de>
 maximilian attems <max@stro.at>
+xtraeme <xtraeme@voidlinux.eu>

Makefile

@@ -15,6 +15,7 @@ mandir ?= ${prefix}/share/man
 CFLAGS ?= -O2 -g -Wall
 CFLAGS += -std=gnu99 -D_FILE_OFFSET_BITS=64 -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
 bashcompletiondir ?= ${datadir}/bash-completion/completions
+pkgconfigdatadir ?= $(datadir)/pkgconfig
 
 man1pages = lsinitrd.1
 
@@ -28,20 +29,20 @@ man8pages = dracut.8 \
             dracut-catimages.8 \
             mkinitrd.8 \
             mkinitrd-suse.8 \
-            modules.d/98systemd/dracut-cmdline.service.8 \
+            modules.d/98dracut-systemd/dracut-cmdline.service.8 \
-            modules.d/98systemd/dracut-initqueue.service.8 \
+            modules.d/98dracut-systemd/dracut-initqueue.service.8 \
-            modules.d/98systemd/dracut-mount.service.8 \
+            modules.d/98dracut-systemd/dracut-mount.service.8 \
-            modules.d/98systemd/dracut-shutdown.service.8 \
+            modules.d/98dracut-systemd/dracut-shutdown.service.8 \
-            modules.d/98systemd/dracut-pre-mount.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-mount.service.8 \
-            modules.d/98systemd/dracut-pre-pivot.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-pivot.service.8 \
-            modules.d/98systemd/dracut-pre-trigger.service.8 \
+            modules.d/98dracut-systemd/dracut-pre-trigger.service.8 \
-            modules.d/98systemd/dracut-pre-udev.service.8
+            modules.d/98dracut-systemd/dracut-pre-udev.service.8
 
 manpages = $(man1pages) $(man5pages) $(man7pages) $(man8pages)
 
 .PHONY: install clean archive rpm testimage test all check AUTHORS doc dracut-version.sh
 
-all: dracut-version.sh dracut-install skipcpio/skipcpio
+all: dracut-version.sh dracut.pc dracut-install skipcpio/skipcpio
 
 DRACUT_INSTALL_OBJECTS = \
         install/dracut-install.o \
@@ -96,7 +97,15 @@ dracut.html: dracut.asc $(manpages) dracut.css dracut.usage.asc
 		http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
 	rm -f -- dracut.xml
 
-install: dracut-version.sh
+dracut.pc: Makefile.inc Makefile
+	@echo "Name: dracut" > dracut.pc
+	@echo "Description: dracut" >> dracut.pc
+	@echo "Version: $(VERSION)$(GITVERSION)" >> dracut.pc
+	@echo "dracutdir=$(pkglibdir)" >> dracut.pc
+	@echo "dracutmodulesdir=$(pkglibdir)/modules.d" >> dracut.pc
+	@echo "dracutconfdir=$(pkglibdir)/dracut.conf.d" >> dracut.pc
+
+install: all
 	mkdir -p $(DESTDIR)$(pkglibdir)
 	mkdir -p $(DESTDIR)$(bindir)
 	mkdir -p $(DESTDIR)$(sysconfdir)
@@ -124,7 +133,7 @@ ifneq ($(enable_documentation),no)
 endif
 	if [ -n "$(systemdsystemunitdir)" ]; then \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
-		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
+		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
 		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants; \
 		ln -s ../dracut-shutdown.service \
 		$(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants/dracut-shutdown.service; \
@@ -138,7 +147,7 @@ endif
 		    dracut-pre-trigger.service \
 		    dracut-pre-udev.service \
 		    ; do \
-			ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
+			ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
 			ln -s ../$$i \
 			$(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants/$$i; \
 		done \
@@ -155,6 +164,8 @@ endif
 	mkdir -p $(DESTDIR)${bashcompletiondir}
 	install -m 0644 dracut-bash-completion.sh $(DESTDIR)${bashcompletiondir}/dracut
 	install -m 0644 lsinitrd-bash-completion.sh $(DESTDIR)${bashcompletiondir}/lsinitrd
+	mkdir -p $(DESTDIR)${pkgconfigdatadir}
+	install -m 0644 dracut.pc $(DESTDIR)${pkgconfigdatadir}/dracut.pc
 
 dracut-version.sh:
 	@echo "DRACUT_VERSION=$(VERSION)$(GITVERSION)" > dracut-version.sh
@@ -212,7 +223,7 @@ check: all syncheck rpm
 	@$(MAKE) -C test check
 
 testimage: all
-	./dracut.sh -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	./dracut.sh -N -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
 	@echo wrote  test-$(shell uname -r).img
 
 debugtestimage: all
@@ -234,7 +245,7 @@ hostimage: all
 	@echo wrote  test-$(shell uname -r).img
 
 AUTHORS:
-	git shortlog  --numbered --summary -e |while read a rest; do echo $$rest;done > AUTHORS
+	git shortlog  --numbered --summary -e |while read a rest || [ -n "$$rest" ]; do echo $$rest;done > AUTHORS
 
 dracut.html.sign: dracut-$(VERSION).tar.xz dracut.html
 	gpg-sign-all dracut-$(VERSION).tar.xz dracut.html

NEWS

@@ -1,3 +1,34 @@
+dracut-042
+==========
+- fixed dmsetup shutdown
+- new kernel command line option "rd.live.overlay.thin"
+    This option changes the underlying mechanism for the overlay in the
+    dmsquash module.
+    Instead of a plain dm snapshot a dm thin snapshot is used. The advantage
+    of the thin snapshot is, that the TRIM command is recognized, which
+    means that at runtime, only the occupied blocks will be claimed from
+    memory, and freed blocks will really be freed in ram.
+- dmsquash: Add squashfs support to rd.live.fsimg
+    Previously rd.live.fsimg only supported filesystems residing in
+    (compressed) archives.
+    Now rd.live.fsimg can also be used when a squashfs image is used.
+    This is achieved by extracting the rootfs image from the squashfs and
+    then continue with the default routines for rd.live.fsimg.
+- lvm: add support for LVM system id
+- split up the systemd dracut module
+    Basic systemd functionality is in 00systemd now.
+    Switching root and the initrd.target is in 00systemd-initrd.
+    Dracut additions to the systemd initrd are in 98dracut-systemd.
+- support for creating a UEFI boot executable via argument "--uefi"
+    With an EFI stub, the kernel, the initramfs and a kernel cmdline can be
+    glued together to a single UEFI executable, which can be booted by a
+    UEFI BIOS.
+- network: split out kernel-network-modules, now in 90kernel-network-modules
+- support for ethernet point-to-point connections configured via DHCP
+- kernel-modules: install all HID drivers
+- dracut.pc pkg-config file
+- mount /dev, /dev/shm and /run noexec
+
 dracut-041
 ==========
 - fixed the shutdown loop

README.testsuite

@@ -1,5 +1,6 @@
 For the testsuite to work, you will have to install at least the following software packages:
 dash \
+bridge-utils \
 asciidoc \
 mdadm \
 lvm2 \

TODO

@@ -6,6 +6,8 @@ Items are ordered in priority.
 
 INITRAMFS TODO
 
+- search domain string
+- peerdns=no
 - allow dual stack configuration (IPv4, IPv6) for the same interface
 - "bind-mount" kernel drivers in real root for the rescue image,
   if the real root does not have any kernel modules for this kernel

dracut-bash-completion.sh

@@ -32,6 +32,7 @@ _dracut() {
                               --xz --no-compress --gzip --list-modules --show-modules --keep
                               --printsize --regenerate-all --noimageifnotneeded --early-microcode
                               --no-early-microcode --print-cmdline --prelink --noprelink --reproducible
+                              --uefi
                               '
 
                        [ARG]='-a -m -o -d -I -k -c -L --kver --add --force-add --add-drivers
@@ -39,7 +40,7 @@ _dracut() {
                               --fwdir --libdirs --fscks --add-fstab --mount --device --nofscks
                               --kmoddir --conf --confdir --tmpdir --stdlog --compress --prefix
                               --kernel-cmdline --sshkey --persistent-policy --install-optional
-                              --loginstall
+                              --loginstall --uefi-stub --kernel-image
                               '
         )
 

dracut-functions.sh

@@ -309,7 +309,7 @@ get_fs_env() {
     [[ $1 ]] || return
     unset ID_FS_TYPE
     ID_FS_TYPE=$(blkid -u filesystem -o export -- "$1" \
-        | while read line; do
+        | while read line || [ -n "$line" ]; do
             if [[ "$line" == TYPE\=* ]]; then
                 printf "%s" "${line#TYPE=}";
                 exit 0;
@@ -435,7 +435,7 @@ find_block_device() {
     if [[ $use_fstab != yes ]]; then
         [[ -d $_find_mpt/. ]]
         findmnt -e -v -n -o 'MAJ:MIN,SOURCE' --target "$_find_mpt" | { \
-            while read _majmin _dev; do
+            while read _majmin _dev || [ -n "$_dev" ]; do
                 if [[ -b $_dev ]]; then
                     if ! [[ $_majmin ]] || [[ $_majmin == 0:* ]]; then
                         _majmin=$(get_maj_min $_dev)
@@ -456,7 +456,7 @@ find_block_device() {
     # fall back to /etc/fstab
 
     findmnt -e --fstab -v -n -o 'MAJ:MIN,SOURCE' --target "$_find_mpt" | { \
-        while read _majmin _dev; do
+        while read _majmin _dev || [ -n "$_dev" ]; do
             if ! [[ $_dev ]]; then
                 _dev="$_majmin"
                 unset _majmin
@@ -492,7 +492,7 @@ find_mp_fstype() {
 
     if [[ $use_fstab != yes ]]; then
         findmnt -e -v -n -o 'FSTYPE' --target "$1" | { \
-            while read _fs; do
+            while read _fs || [ -n "$_fs" ]; do
                 [[ $_fs ]] || continue
                 [[ $_fs = "autofs" ]] && continue
                 printf "%s" "$_fs"
@@ -501,7 +501,7 @@ find_mp_fstype() {
     fi
 
     findmnt --fstab -e -v -n -o 'FSTYPE' --target "$1" | { \
-        while read _fs; do
+        while read _fs || [ -n "$_fs" ]; do
             [[ $_fs ]] || continue
             [[ $_fs = "autofs" ]] && continue
             printf "%s" "$_fs"
@@ -528,7 +528,7 @@ find_dev_fstype() {
 
     if [[ $use_fstab != yes ]]; then
         findmnt -e -v -n -o 'FSTYPE' --source "$_find_dev" | { \
-            while read _fs; do
+            while read _fs || [ -n "$_fs" ]; do
                 [[ $_fs ]] || continue
                 [[ $_fs = "autofs" ]] && continue
                 printf "%s" "$_fs"
@@ -537,7 +537,7 @@ find_dev_fstype() {
     fi
 
     findmnt --fstab -e -v -n -o 'FSTYPE' --source "$_find_dev" | { \
-        while read _fs; do
+        while read _fs || [ -n "$_fs" ]; do
             [[ $_fs ]] || continue
             [[ $_fs = "autofs" ]] && continue
             printf "%s" "$_fs"
@@ -977,7 +977,7 @@ inst_rules_wildcard() {
             _found=$_rule
         fi
     done
-    if [ -n ${hostonly} ] ; then
+    if [[ -n ${hostonly} ]] ; then
         for _rule in ${_target}/$1 ; do
             if [[ -f $_rule ]]; then
                 inst_rule_programs "$_rule"
@@ -997,7 +997,7 @@ prepare_udev_rules() {
     for f in "$@"; do
         f="${initdir}/etc/udev/rules.d/$f"
         [ -e "$f" ] || continue
-        while read line; do
+        while read line || [ -n "$line" ]; do
             if [ "${line%%IMPORT PATH_ID}" != "$line" ]; then
                 if [ $UDEVVERSION -ge 174 ]; then
                     printf '%sIMPORT{builtin}="path_id"\n' "${line%%IMPORT PATH_ID}"
@@ -1130,7 +1130,7 @@ inst_opt_decompress() {
 # or the "check" script, if module-setup.sh is not found
 # "check $hostonly" is called
 module_check() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     local _forced=0
     local _hostonly=$hostonly
@@ -1161,7 +1161,7 @@ module_check() {
 # or the "check" script, if module-setup.sh is not found
 # "mount_needs=1 check 0" is called
 module_check_mount() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     mount_needs=1
     [[ -d $_moddir ]] || return 1
@@ -1186,7 +1186,7 @@ module_check_mount() {
 # execute the depends() function of module-setup.sh of <dracut module>
 # or the "depends" script, if module-setup.sh is not found
 module_depends() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     [[ -d $_moddir ]] || return 1
     if [[ ! -f $_moddir/module-setup.sh ]]; then
@@ -1209,7 +1209,7 @@ module_depends() {
 # execute the cmdline() function of module-setup.sh of <dracut module>
 # or the "cmdline" script, if module-setup.sh is not found
 module_cmdline() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     [[ -d $_moddir ]] || return 1
     if [[ ! -f $_moddir/module-setup.sh ]]; then
@@ -1230,7 +1230,7 @@ module_cmdline() {
 # execute the install() function of module-setup.sh of <dracut module>
 # or the "install" script, if module-setup.sh is not found
 module_install() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     [[ -d $_moddir ]] || return 1
     if [[ ! -f $_moddir/module-setup.sh ]]; then
@@ -1251,7 +1251,7 @@ module_install() {
 # execute the installkernel() function of module-setup.sh of <dracut module>
 # or the "installkernel" script, if module-setup.sh is not found
 module_installkernel() {
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     [[ -d $_moddir ]] || return 1
     if [[ ! -f $_moddir/module-setup.sh ]]; then
@@ -1273,7 +1273,7 @@ module_installkernel() {
 # device and filesystem types in "${host_fs_types[@]}"
 check_mount() {
     local _mod=$1
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     local _moddep
 
@@ -1338,7 +1338,7 @@ check_mount() {
 # that the modules were checked for the dependency tracking process
 check_module() {
     local _mod=$1
-    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
     local _ret
     local _moddep
     # If we are already scheduled to be loaded, no need to check again.
@@ -1512,7 +1512,7 @@ for_each_kmod_dep() {
     local _func=$1 _kmod=$2 _cmd _modpath _options
     shift 2
     modprobe "$@" --ignore-install --show-depends $_kmod 2>&${_fderr} | (
-        while read _cmd _modpath _options; do
+        while read _cmd _modpath _options || [ -n "$_cmd" ]; do
             [[ $_cmd = insmod ]] || continue
             $_func ${_modpath} || exit $?
         done
@@ -1528,7 +1528,7 @@ dracut_kernel_post() {
             --ignore-install --show-depends --set-version $kernel \
             < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist" 2>/dev/null \
             | sort -u \
-            | while read _cmd _modpath _options; do
+            | while read _cmd _modpath _options || [ -n "$_cmd" ]; do
             [[ $_cmd = insmod ]] || continue
             echo "$_modpath"
         done > "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"
@@ -1537,7 +1537,7 @@ dracut_kernel_post() {
             if [[ $DRACUT_INSTALL ]] && [[ -z $_moddirname ]]; then
                 xargs -r $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} -a < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"
             else
-                while read _modpath; do
+                while read _modpath || [ -n "$_modpath" ]; do
                     local _destpath=$_modpath
                     [[ $_moddirname ]] && _destpath=${_destpath##$_moddirname/}
                     _destpath=${_destpath##*/lib/modules/$kernel/}
@@ -1545,12 +1545,12 @@ dracut_kernel_post() {
                 done < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep"
             fi
         ) &
-        _pid=$(jobs -p | while read a ; do printf ":$a";done)
+        _pid=$(jobs -p | while read a  || [ -n "$a" ]; do printf ":$a";done)
         _pid=${_pid##*:}
 
         if [[ $DRACUT_INSTALL ]]; then
             xargs -r modinfo -k $kernel -F firmware < "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist.dep" \
-                | while read line; do
+                | while read line || [ -n "$line" ]; do
                 for _fwdir in $fw_dir; do
                     echo $_fwdir/$line;
                 done;
@@ -1635,7 +1635,7 @@ find_kernel_modules_by_path () {
 
     _OLDIFS=$IFS
     IFS=:
-    while read a rest; do
+    while read a rest || [ -n "$a" ]; do
         [[ $a = */$1/* ]] || [[ $a = updates/* ]] || continue
         printf "%s\n" "$srcmods/$a"
     done < "$srcmods/modules.dep"
@@ -1730,7 +1730,7 @@ instmods() {
     function instmods_1() {
         local _mod _mpargs
         if (($# == 0)); then  # filenames from stdin
-            while read _mod; do
+            while read _mod || [ -n "$_mod" ]; do
                 inst1mod "${_mod%.ko*}" || {
                     if [[ "$_check" == "yes" ]] && [[ "$_silent" == "no" ]]; then
                         dfatal "Failed to install module $_mod"
@@ -1753,7 +1753,7 @@ instmods() {
     # Capture all stderr from modprobe to _fderr. We could use {var}>...
     # redirections, but that would make dracut require bash4 at least.
     eval "( instmods_1 \"\$@\" ) ${_fderr}>&1" \
-        | while read line; do [[ "$line" =~ $_filter_not_found ]] || echo $line;done | derror
+        | while read line || [ -n "$line" ]; do [[ "$line" =~ $_filter_not_found ]] || echo $line;done | derror
     _ret=$?
     return $_ret
 }

dracut-initramfs-restore.sh

@@ -14,6 +14,8 @@ SKIP="$dracutbasedir/skipcpio"
 
 [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
 
+mount -o ro /boot &>/dev/null
+
 if [[ $MACHINE_ID ]] && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
     IMG="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
 fi
@@ -22,6 +24,7 @@ fi
 cd /run/initramfs
 
 [ -f .need_shutdown -a -f "$IMG" ] || exit 1
+
 if $SKIP "$IMG" | zcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then
     rm -f -- .need_shutdown
 elif $SKIP "$IMG" | xzcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then

dracut-logger.sh

@@ -365,7 +365,7 @@ dlog() {
     if (( $# > 1 )); then
         _do_dlog "$@"
     else
-        while read line; do
+        while read line || [ -n "$line" ]; do
             _do_dlog "$1" "$line"
         done
     fi

dracut.8.asc

@@ -31,7 +31,7 @@ early userspace.
 For a complete list of kernel command line options see *dracut.cmdline*(7).
 
 If you are dropped to an emergency shell, while booting your initramfs,
-the file _/run/initramfs/rdsosreport.txt_ is created, which can be safed to a
+the file _/run/initramfs/rdsosreport.txt_ is created, which can be saved to a
 (to be mounted by hand) partition (usually /boot) or a USB stick.
 Additional debugging info can be produced by adding **rd.debug** to the kernel
 command line. _/run/initramfs/rdsosreport.txt_ contains all logs and the output
@@ -465,6 +465,20 @@ will not be able to boot.
 **--loginstall _<DIR>_::
     Log all files installed from the host to _<DIR>_.
 
+**--uefi::
+    Instead of creating an initramfs image, dracut will create an UEFI executable,
+    which can be executed by an UEFI BIOS.
+
+**--uefi-stub _<FILE>_::
+    Specifies the UEFI stub loader, which will load the attached kernel, initramfs and
+    kernel command line and boots the kernel. The default is
+    _/lib/systemd/boot/efi/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+    or _/usr/lib/gummiboot/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+
+**--kernel-image _<FILE>_::
+    Specifies the kernel image, which to include in the UEFI executable. The default is
+    _/lib/modules/<KERNEL-VERSION>/vmlinuz_ or _/boot/vmlinuz-<KERNEL-VERSION>_
+
 FILES
 -----
 _/var/log/dracut.log_::

dracut.cmdline.7.asc

@@ -163,7 +163,7 @@ Misc
 Debug
 ~~~~~
 If you are dropped to an emergency shell, the file 
-_/run/initramfs/rdsosreport.txt_ is created, which can be safed to a (to be
+_/run/initramfs/rdsosreport.txt_ is created, which can be saved to a (to be
 mounted by hand) partition (usually /boot) or a USB stick. Additional debugging
 info can be produced by adding **rd.debug** to the kernel command line.
 _/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools.
@@ -834,11 +834,39 @@ Enables debug output from the live boot process.
 Specifies the directory within the squashfs where the ext3fs.img or rootfs.img
 can be found.  By default, this is __LiveOS__.
 
+**rd.live.ram=**1::
+Copy the complete image to RAM and use this for booting. This is useful
+when the image resides on i.e. a DVD which needs to be ejected later on.
+
+**rd.live.overlay=**_<devspec>_:_(<pathspec>|auto)__
+Allow the usage of a permanent overlay.
+_<devspec>_ specifies the path to a device with a mountable filesystem.
+_<pathspec>_ is the path to a file within that filesystem, which shall be used to
+persist the changes made to the device specified by **root=live:__<url>__** option.
++
+[listing]
+.Example
+--
+rd.live.overlay=/dev/sdb1:persistent-overlay.img
+--
+
+**rd.live.overlay.thin=**1::
+Enables the usage of thin snapshots instead of classic dm snapshots.
+The advantage of thin snapshots is, that they support discards, and will free
+blocks which are not claimed by the filesystem. In this use case this means,
+that memory is given back to the kernel, when the filesystem does not claim it
+anymore.
+
 **rd.writable.fsimg=**1::
 Enables writable filesystem support.  The system will boot with a fully 
 writable filesystem without snapshots __(see notes above about available live boot options)__.
 You can use the **rootflags** option to set mount options for the live
 filesystem as well __(see documentation about rootflags in the **Standard** section above)__.
+This implies that the whole image is copied to RAM before the boot continues.
++
+NOTE: There must be enough free RAM available to hold the complete image.
++
+This method is very suitable for diskless boots.
 
 
 Plymouth Boot Splash

dracut.conf.5.asc

@@ -10,7 +10,8 @@ dracut.conf - configuration file(s) for dracut
 
 SYNOPSIS
 --------
-_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_
+_/etc/dracut.conf_
+_/etc/dracut.conf.d/\*.conf_
 _/usr/lib/dracut/dracut.conf.d/*.conf_
 
 Description
@@ -74,6 +75,13 @@ Configuration files must have the extension .conf; other extensions are ignored.
     Specify additional files to include in the initramfs, separated by spaces,
     if they exist.
 
+*compress=*"__{bzip2|lzma|xz|gzip|lzo|lz4|<compressor [args ...]>}__"::
+    Compress the generated initramfs using the passed compression program. If
+    you pass it just the name of a compression program, it will call that
+    program with known-working arguments. If you pass arguments, it will be called
+    with exactly those arguments. Depending on what you pass, this may result in
+    an initramfs that the kernel cannot decompress.
+
 *do_strip=*"__{yes|no}__"::
     Strip binaries in the initramfs (default=yes)
 
@@ -84,7 +92,7 @@ Configuration files must have the extension .conf; other extensions are ignored.
     Host-Only mode: Install only what is needed for booting the local host
     instead of a generic host and generate host-specific configuration.
 
-*hostonly_cmdline*"__{yes|no}__"::
+*hostonly_cmdline=*"__{yes|no}__"::
     If set, store the kernel command line arguments needed in the initramfs
 
 *persistent_policy=*"__<policy>__"::
@@ -189,6 +197,16 @@ provide a valid _/etc/fstab_.
 *loginstall=*"__<DIR>__"::
     Log all files installed from the host to _<DIR>_.
 
+*uefi_stub=*"_<FILE>_"::
+    Specifies the UEFI stub loader, which will load the attached kernel, initramfs and
+    kernel command line and boots the kernel. The default is
+    _/lib/systemd/boot/efi/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+    or _/usr/lib/gummiboot/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
+
+*kernel_image=*"_<FILE>_"::
+    Specifies the kernel image, which to include in the UEFI executable. The default is
+    _/lib/modules/<KERNEL-VERSION>/vmlinuz_ or _/boot/vmlinuz-<KERNEL-VERSION>_
+
 Files
 -----
 _/etc/dracut.conf_::

dracut.conf.d/fedora.conf.example

@@ -15,4 +15,5 @@ systemdsystemunitdir=/usr/lib/systemd/system
 systemdsystemconfdir=/etc/systemd/system
 udevdir=/usr/lib/udev
 hostonly="yes"
+hostonly_cmdline="no"
 early_microcode="yes"

dracut.modules.7.asc

@@ -19,7 +19,7 @@ you can replace init with your own version of _99base_, this is not encouraged.
 Instead you should use, if possible, the hooks of dracut. All hooks, and the
 point of time in which they are executed, are described in <<stages>>.
 
-The main script, which creates the initramfs is dracut itsself. It parses all
+The main script, which creates the initramfs is dracut itself. It parses all
 arguments and sets up the directory, in which everything is installed. It then
 executes all check, install, installkernel scripts found in the modules, which
 are to be processed. After everything is installed, the install directory is

dracut.sh

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/bash --norc
 #
 # Generator script for a dracut initramfs
 # Tries to retain some degree of compatibility with the command line
@@ -195,6 +195,10 @@ Creates initial ramdisk images for preloading modules
   --logfile [FILE]      Logfile to use (overrides configuration setting)
   --reproducible        Create reproducible images
   --loginstall [DIR]    Log all files installed from the host to [DIR]
+  --uefi                Create an UEFI executable with the kernel cmdline and
+                        kernel combined
+  --uefi-stub [FILE]    Use the UEFI stub [FILE] to create an UEFI executable
+  --kernel-image [FILE] location of the kernel image
 
 If [LIST] has multiple arguments, then you have to put these in quotes.
 
@@ -389,6 +393,9 @@ rearrange_params()
         --long no-early-microcode \
         --long reproducible \
         --long loginstall: \
+        --long uefi \
+        --long uefi-stub: \
+        --long kernel-image: \
         -- "$@")
 
     if (( $? != 0 )); then
@@ -577,6 +584,11 @@ while :; do
         --regenerate-all) regenerate_all="yes";;
         --noimageifnotneeded) noimageifnotneeded="yes";;
         --reproducible) reproducible_l="yes";;
+        --uefi)        uefi="yes";;
+        --uefi-stub)
+                       uefi_stub_l="$2";               PARMS_TO_STORE+=" '$2'"; shift;;
+        --kernel-image)
+                       kernel_image_l="$2";            PARMS_TO_STORE+=" '$2'"; shift;;
         --) shift; break;;
 
         *)  # should not even reach this point
@@ -809,7 +821,7 @@ stdloglvl=$((stdloglvl + verbosity_mod_l))
 [[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
 [[ $lvmconf_l ]] && lvmconf=$lvmconf_l
 [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
-[[ $fw_dir ]] || fw_dir="/lib/firmware/updates /lib/firmware"
+[[ $fw_dir ]] || fw_dir="/lib/firmware/updates /lib/firmware /lib/firmware/$kernel"
 [[ $tmpdir_l ]] && tmpdir="$tmpdir_l"
 [[ $tmpdir ]] || tmpdir=/var/tmp
 [[ $INITRD_COMPRESS ]] && compress=$INITRD_COMPRESS
@@ -822,6 +834,8 @@ stdloglvl=$((stdloglvl + verbosity_mod_l))
 [[ $logfile_l ]] && logfile="$logfile_l"
 [[ $reproducible_l ]] && reproducible="$reproducible_l"
 [[ $loginstall_l ]] && loginstall="$loginstall_l"
+[[ $uefi_stub_l ]] && uefi_stub="$uefi_stub_l"
+[[ $kernel_image_l ]] && kernel_image="$kernel_image_l"
 
 # eliminate IFS hackery when messing with fw_dir
 fw_dir=${fw_dir//:/ }
@@ -839,7 +853,8 @@ fi
 # handle compression options.
 [[ $compress ]] || compress="gzip"
 case $compress in
-    bzip2) compress="bzip2 -9";;
+    bzip2) compress="bzip2 -9";
+        command -v lbzip2 > /dev/null 2>&1 && compress="lbzip2 -9";;
     lzma)  compress="lzma -9 -T0";;
     xz)    compress="xz --check=crc32 --lzma2=dict=1MiB -T0";;
     gzip)  compress="gzip -n -9";
@@ -880,6 +895,7 @@ trap '
     ret=$?;
     [[ $keep ]] && echo "Not removing $initdir." >&2 || { [[ $initdir ]] && rm -rf -- "$initdir"; };
     [[ $keep ]] && echo "Not removing $early_cpio_dir." >&2 || { [[ $early_cpio_dir ]] && rm -Rf -- "$early_cpio_dir"; };
+    [[ $keep ]] && echo "Not removing $uefi_outdir." >&2 || { [[ $uefi_outdir ]] && rm -Rf -- "$uefi_outdir"; };
     [[ $_dlogdir ]] && rm -Rf -- "$_dlogdir";
     exit $ret;
     ' EXIT
@@ -919,7 +935,7 @@ if ! [[ $print_cmdline ]]; then
     rm -fr -- ${initdir}/*
 fi
 
-# Verify bash version, current minimum is 3.1
+# Verify bash version, current minimum is 4
 if (( BASH_VERSINFO[0] < 4 )); then
     dfatal 'You need at least Bash 4 to use dracut, sorry.'
     exit 1
@@ -1031,6 +1047,48 @@ if [[ ! $print_cmdline ]]; then
         fi
         loginstall=$(readlink -f "$loginstall")
     fi
+
+    if [[ $uefi = yes ]]; then
+        if ! command -v objcopy &>/dev/null; then
+            dfatal "Need 'objcopy' to create a UEFI executable"
+            exit 1
+        fi
+        unset EFI_MACHINE_TYPE_NAME
+        case $(arch) in
+            x86_64)
+                EFI_MACHINE_TYPE_NAME=x64;;
+            ia32)
+                EFI_MACHINE_TYPE_NAME=ia32;;
+            *)
+                dfatal "Architecture '$(arch)' not supported to create a UEFI executable"
+                exit 1
+                ;;
+        esac
+
+        if ! [[ -s $uefi_stub ]]; then
+            for uefi_stub in \
+                "/lib/systemd/boot/efi/linux${EFI_MACHINE_TYPE_NAME}.efi.stub" \
+                    "/usr/lib/gummiboot/linux${EFI_MACHINE_TYPE_NAME}.efi.stub"; do
+                [[ -s $uefi_stub ]] || continue
+                break
+            done
+        fi
+        if ! [[ -s $uefi_stub ]]; then
+            dfatal "Can't find a uefi stub '$uefi_stub' to create a UEFI executable"
+            exit 1
+        fi
+
+        if ! [[ $kernel_image ]]; then
+            for kernel_image in "/lib/modules/$kernel/vmlinuz" "/boot/vmlinuz-$kernel"; do
+                [[ -s "$kernel_image" ]] || continue
+                break
+            done
+        fi
+        if ! [[ -s $kernel_image ]]; then
+            dfatal "Can't find a kernel image '$kernel_image' to create a UEFI executable"
+            exit 1
+        fi
+    fi
 fi
 
 if [[ $acpi_override = yes ]] && ! check_kernel_config CONFIG_ACPI_INITRD_TABLE_OVERRIDE; then
@@ -1094,7 +1152,7 @@ done
 
 for f in $add_fstab; do
     [[ -e $f ]] || continue
-    while read dev rest; do
+    while read dev rest || [ -n "$dev" ]; do
         push_host_devs "$dev"
     done < "$f"
 done
@@ -1141,11 +1199,11 @@ if [[ $hostonly ]]; then
     done
 
     if [[ -f /proc/swaps ]] && [[ -f /etc/fstab ]]; then
-        while read dev type rest; do
+        while read dev type rest || [ -n "$dev" ]; do
             [[ -b $dev ]] || continue
             [[ "$type" == "partition" ]] || continue
 
-            while read _d _m _t _o _r; do
+            while read _d _m _t _o _r || [ -n "$_d" ]; do
                 [[ "$_d" == \#* ]] && continue
                 [[ $_d ]] || continue
                 [[ $_t != "swap" ]] && continue
@@ -1155,7 +1213,7 @@ if [[ $hostonly ]]; then
                 [[ "$_d" -ef "$dev" ]] || continue
 
                 if [[ -f /etc/crypttab ]]; then
-                    while read _mapper _a _p _o; do
+                    while read _mapper _a _p _o || [ -n "$_mapper" ]; do
                         [[ $_mapper = \#* ]] && continue
                         [[ "$_d" -ef /dev/mapper/"$_mapper" ]] || continue
                         [[ "$_o" ]] || _o="$_p"
@@ -1166,7 +1224,9 @@ if [[ $hostonly ]]; then
                     done < /etc/crypttab
                 fi
 
-                push_host_devs "$(readlink -f "$dev")"
+                _dev="$(readlink -f "$dev")"
+                push_host_devs "$_dev"
+                push swap_devs "$_dev"
                 break
             done < /etc/fstab
         done < /proc/swaps
@@ -1174,8 +1234,8 @@ if [[ $hostonly ]]; then
     # record all host modaliases
     declare -A host_modalias
     find  /sys/devices/ -name uevent -print > "$initdir/.modalias"
-    while read m; do
+    while read m || [ -n "$m" ]; do
-        while read line; do
+        while read line || [ -n "$line" ]; do
             [[ "$line" != MODALIAS\=* ]] && continue
             modalias="${line##MODALIAS=}" && [[ $modalias ]] && host_modalias["$modalias"]=1
             break
@@ -1184,14 +1244,14 @@ if [[ $hostonly ]]; then
 
     rm -f -- "$initdir/.modalias"
 
-    while read _k _s _v; do
+    while read _k _s _v || [ -n "$_k" ]; do
         [ "$_k" != "name" -a "$_k" != "driver" ] && continue
         host_modalias["$_v"]=1
     done </proc/crypto
 
     # check /proc/modules
     declare -A host_modules
-    while read m rest; do
+    while read m rest || [ -n "$m" ]; do
         host_modules["$m"]=1
     done </proc/modules
 fi
@@ -1277,7 +1337,7 @@ export initdir dracutbasedir \
     omit_drivers mdadmconf lvmconf root_dev \
     use_fstab fstab_lines libdirs fscks nofscks ro_mnt \
     stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \
-    debug host_fs_types host_devs sshkey add_fstab \
+    debug host_fs_types host_devs swap_devs sshkey add_fstab \
     DRACUT_VERSION udevdir prefix filesystems drivers \
     systemdutildir systemdsystemunitdir systemdsystemconfdir \
     host_modalias host_modules hostonly_cmdline loginstall \
@@ -1291,14 +1351,24 @@ for_each_module_dir check_mount
 
 dracut_module_included "fips" && export DRACUT_FIPS_MODE=1
 
-if [[ $print_cmdline ]]; then
+do_print_cmdline()
-    modules_loaded=" "
+{
+    local -A _mods_to_print
+    for i in $modules_loaded $mods_to_load; do
+        _mods_to_print[$i]=1
+    done
+
     # source our modules.
     for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
         _d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]}
+        [[ ${_mods_to_print[$_d_mod]} ]] || continue
         module_cmdline "$_d_mod"
     done
     unset moddir
+}
+
+if [[ $print_cmdline ]]; then
+    do_print_cmdline
     printf "\n"
     exit 0
 fi
@@ -1317,7 +1387,7 @@ if [[ $prefix ]]; then
 fi
 
 if [[ $kernel_only != yes ]]; then
-    for d in usr/bin usr/sbin bin etc lib sbin tmp usr var $libdirs; do
+    for d in usr/bin usr/sbin bin etc lib sbin tmp usr var var/tmp $libdirs; do
         [[ -e "${initdir}${prefix}/$d" ]] && continue
         if [ -L "/$d" ]; then
             inst_symlink "/$d" "${prefix}/$d"
@@ -1364,36 +1434,35 @@ modules_loaded=" "
 # source our modules.
 for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
     _d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]}
-    if [[ "$mods_to_load" == *\ $_d_mod\ * ]]; then
+    [[ "$mods_to_load" == *\ $_d_mod\ * ]] || continue
-        if [[ $show_modules = yes ]]; then
+    if [[ $show_modules = yes ]]; then
-            printf "%s\n" "$_d_mod"
+        printf "%s\n" "$_d_mod"
-        else
+    else
-            dinfo "*** Including module: $_d_mod ***"
+        dinfo "*** Including module: $_d_mod ***"
-        fi
+    fi
-        if [[ $kernel_only == yes ]]; then
+    if [[ $kernel_only == yes ]]; then
+        module_installkernel "$_d_mod" || {
+            dfatal "installkernel failed in module $_d_mod"
+            exit 1
+        }
+    else
+        module_install "$_d_mod"
+        if [[ $no_kernel != yes ]]; then
             module_installkernel "$_d_mod" || {
                 dfatal "installkernel failed in module $_d_mod"
                 exit 1
             }
-        else
-            module_install "$_d_mod"
-            if [[ $no_kernel != yes ]]; then
-                module_installkernel "$_d_mod" || {
-                    dfatal "installkernel failed in module $_d_mod"
-                    exit 1
-                }
-            fi
         fi
-        mods_to_load=${mods_to_load// $_d_mod /}
+    fi
-        modules_loaded+="$_d_mod "
+    mods_to_load=${mods_to_load// $_d_mod /}
+    modules_loaded+="$_d_mod "
 
-        #print the module install size
+    #print the module install size
-        if [ -n "$printsize" ]; then
+    if [ -n "$printsize" ]; then
-            _isize_new=$(du -sk ${initdir}|cut -f1)
+        _isize_new=$(du -sk ${initdir}|cut -f1)
-            _isize_delta=$((_isize_new - _isize))
+        _isize_delta=$((_isize_new - _isize))
-            printf "%s\n" "$_d_mod install size: ${_isize_delta}k"
+        printf "%s\n" "$_d_mod install size: ${_isize_delta}k"
-            _isize=$_isize_new
+        _isize=$_isize_new
-        fi
     fi
 done
 unset moddir
@@ -1452,6 +1521,7 @@ if [[ $kernel_only != yes ]]; then
         [ -z "${line[3]}" ] && line[3]="defaults"
         [ -z "${line[4]}" ] && line[4]="0"
         [ -z "${line[5]}" ] && line[5]="2"
+        strstr "${line[2]}" "nfs" && line[5]="0"
         echo "${line[@]}" >> "${initdir}/etc/fstab"
     done
 
@@ -1485,27 +1555,29 @@ if [[ $kernel_only != yes ]]; then
     done
 fi
 
-while pop include_src src && pop include_target tgt; do
+while pop include_src src && pop include_target target; do
-    if [[ $src && $tgt ]]; then
+    if [[ $src && $target ]]; then
         if [[ -f $src ]]; then
-            inst $src $tgt
+            inst $src $target
         else
             ddebug "Including directory: $src"
-            destdir="${initdir}/${tgt}"
+            destdir="${initdir}/${target}"
             mkdir -p "$destdir"
             # check for preexisting symlinks, so we can cope with the
             # symlinks to $prefix
-            for i in "$src"/*; do
+            # Objectname is a file or a directory
-                [[ -e "$i" || -h "$i" ]] || continue
+            for objectname in "$src"/*; do
-                s=${destdir}/${i#$src/}
+                [[ -e "$objectname" || -h "$objectname" ]] || continue
-                if [[ -d "$i" ]]; then
+                if [[ -d "$objectname" ]]; then
-                    if ! [[ -e "$s" ]]; then
+                    # objectname is a directory, let's compute the final directory name
-                        mkdir -m 0755 -p "$s"
+                    object_destdir=${destdir}/${objectname#$src/}
-                        chmod --reference="$i" "$s"
+                    if ! [[ -e "$object_destdir" ]]; then
+                        mkdir -m 0755 -p "$object_destdir"
+                        chmod --reference="$objectname" "$object_destdir"
                     fi
-                    cp --reflink=auto --sparse=auto -fa -t "$s" "$i"/*
+                    cp --reflink=auto --sparse=auto -fa -t "$object_destdir" "$objectname"/*
                 else
-                    cp --reflink=auto --sparse=auto -fa -t "$destdir" "$i"
+                    cp --reflink=auto --sparse=auto -fa -t "$destdir" "$objectname"
                 fi
             done
         fi
@@ -1565,7 +1637,7 @@ if [[ $do_strip = yes ]] && ! [[ $DRACUT_FIPS_MODE ]]; then
 
     # strip kernel modules, but do not touch signed modules
     find "$initdir" -type f -path '*/lib/modules/*.ko' -print0 \
-        | while read -r -d $'\0' f; do
+        | while read -r -d $'\0' f || [ -n "$f" ]; do
         SIG=$(tail -c 28 "$f")
         [[ $SIG == '~Module signature appended~' ]] || { printf "%s\000" "$f"; }
     done | xargs -r -0 strip -g
@@ -1634,7 +1706,14 @@ if [[ $hostonly_cmdline ]] ; then
     fi
 fi
 rm -f -- "$outfile"
-dinfo "*** Creating image file ***"
+dinfo "*** Creating image file '$outfile' ***"
+
+if [[ $uefi = yes ]]; then
+    uefi_outfile="$outfile"
+    readonly uefi_outdir="$(mktemp --tmpdir="$TMPDIR/" -d -t initrd.XXXXXX)"
+    # redirect initrd output
+    outfile="$uefi_outdir/initrd"
+fi
 
 if [[ $DRACUT_REPRODUCIBLE ]]; then
     find "$initdir" -newer "$dracutbasedir/dracut-functions.sh" -print0 \
@@ -1670,7 +1749,7 @@ if ! (
     dfatal "dracut: creation of $outfile failed"
     exit 1
 fi
-dinfo "*** Creating image file done ***"
+dinfo "*** Creating initrd image file '$outfile' done ***"
 
 if (( maxloglvl >= 5 )); then
     if [[ $allowlocal ]]; then
@@ -1680,4 +1759,32 @@ if (( maxloglvl >= 5 )); then
     fi
 fi
 
+if [[ $uefi = yes ]]; then
+    if [[ $kernel_cmdline ]]; then
+        echo -n "$kernel_cmdline" > "$uefi_outdir/cmdline.txt"
+    elif [[ $hostonly_cmdline = yes ]] && [ -d $initdir/etc/cmdline.d ];then
+        for conf in $initdir/etc/cmdline.d/*.conf ; do
+            [ -e "$conf" ] || continue
+            printf "%s " "$(< $conf)" >> "$uefi_outdir/cmdline.txt"
+        done
+    else
+        do_print_cmdline > "$uefi_outdir/cmdline.txt"
+    fi
+    echo -ne "\x00" >> "$uefi_outdir/cmdline.txt"
+
+    dinfo "Using UEFI kernel cmdline:"
+    dinfo $(< "$uefi_outdir/cmdline.txt")
+
+    [[ -s /usr/lib/os-release ]] && uefi_osrelease="/usr/lib/os-release"
+    [[ -s /etc/os-release ]] && uefi_osrelease="/etc/os-release"
+
+    objcopy \
+        ${uefi_osrelease:+--add-section .osrel=$uefi_osrelease --change-section-vma .osrel=0x20000} \
+        --add-section .cmdline="$uefi_outdir/cmdline.txt" --change-section-vma .cmdline=0x30000 \
+        --add-section .linux="$kernel_image" --change-section-vma .linux=0x40000 \
+        --add-section .initrd="$outfile" --change-section-vma .initrd=0x3000000 \
+        "$uefi_stub" "$uefi_outfile"
+    dinfo "*** Creating UEFI image file '$uefi_outfile' done ***"
+fi
+
 exit 0

dracut.spec

@@ -195,20 +195,9 @@ Requires: %{name} = %{version}-%{release}
 This package contains tools to assemble the local initrd and host configuration.
 
 %prep
-%setup -q -n %{name}-%{version}
+%autosetup -n %{name}-%{version} -S git_am
 cp %{SOURCE1} .
 
-%if %{defined PATCH1}
-git init
-git config user.email "dracut-maint@redhat.com"
-git config user.name "Fedora dracut team"
-git add .
-git commit -a -q -m "%{version} baseline."
-
-# Apply all the patches.
-git am -p1 %{patches}
-%endif
-
 %build
 %configure --systemdsystemunitdir=%{_unitdir} --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) --libdir=%{_prefix}/lib \
 %if %{without doc}
@@ -286,10 +275,6 @@ echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/
 > $RPM_BUILD_ROOT/etc/system-fips
 %endif
 
-# create compat symlink
-mkdir -p $RPM_BUILD_ROOT%{_sbindir}
-ln -sr $RPM_BUILD_ROOT%{_bindir}/dracut $RPM_BUILD_ROOT%{_sbindir}/dracut
-
 %clean
 rm -rf -- $RPM_BUILD_ROOT
 
@@ -301,8 +286,6 @@ rm -rf -- $RPM_BUILD_ROOT
 %{!?_licensedir:%global license %%doc}
 %license COPYING lgpl-2.1.txt
 %{_bindir}/dracut
-# compat symlink
-%{_sbindir}/dracut
 %{_datadir}/bash-completion/completions/dracut
 %{_datadir}/bash-completion/completions/lsinitrd
 %if 0%{?fedora} > 12 || 0%{?rhel} >= 6 || 0%{?suse_version} > 9999
@@ -324,6 +307,7 @@ rm -rf -- $RPM_BUILD_ROOT
 %endif
 %dir %{_sysconfdir}/dracut.conf.d
 %dir %{dracutlibdir}/dracut.conf.d
+%{_datadir}/pkgconfig/dracut.pc
 
 %if %{with doc}
 %{_mandir}/man8/dracut.8*
@@ -345,6 +329,8 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/00bootchart
 %endif
 %{dracutlibdir}/modules.d/00bash
+%{dracutlibdir}/modules.d/00systemd
+%{dracutlibdir}/modules.d/01systemd-initrd
 %{dracutlibdir}/modules.d/03modsign
 %{dracutlibdir}/modules.d/03rescue
 %{dracutlibdir}/modules.d/04watchdog
@@ -389,7 +375,7 @@ rm -rf -- $RPM_BUILD_ROOT
 %{dracutlibdir}/modules.d/98pollcdrom
 %{dracutlibdir}/modules.d/98selinux
 %{dracutlibdir}/modules.d/98syslog
-%{dracutlibdir}/modules.d/98systemd
+%{dracutlibdir}/modules.d/98dracut-systemd
 %{dracutlibdir}/modules.d/98usrmount
 %{dracutlibdir}/modules.d/99base
 %{dracutlibdir}/modules.d/99fs-lib
@@ -422,7 +408,9 @@ rm -rf -- $RPM_BUILD_ROOT
 
 %files network
 %defattr(-,root,root,0755)
+%{dracutlibdir}/modules.d/02systemd-networkd
 %{dracutlibdir}/modules.d/40network
+%{dracutlibdir}/modules.d/90kernel-network-modules
 %{dracutlibdir}/modules.d/95fcoe
 %{dracutlibdir}/modules.d/95iscsi
 %{dracutlibdir}/modules.d/90livenet

install/dracut-install.c

@@ -222,7 +222,7 @@ static int cp(const char *src, const char *dst)
                 if (ret == 0) {
                         struct timeval tv[2];
                         if (fchown(dest_desc, sb.st_uid, sb.st_gid) != 0)
-                                if(fchown(dest_desc, (__uid_t) - 1, sb.st_gid) != 0)
+                                if(fchown(dest_desc, (uid_t) - 1, sb.st_gid) != 0)
                                     log_error("Failed to chown %s: %m", dst);
                         tv[0].tv_sec = sb.st_atime;
                         tv[0].tv_usec = 0;
@@ -388,6 +388,11 @@ static int resolve_deps(const char *src)
                         break;
                 }
 
+		/* musl ldd */
+		if (strstr(buf, "Not a valid dynamic program"))
+			break;
+
+		/* glibc */
                 if (strstr(buf, "not a dynamic executable"))
                         break;
 

install/util.h

@@ -20,6 +20,8 @@
   along with systemd; If not, see <http://www.gnu.org/licenses/>.
 ***/
 
+#define _GNU_SOURCE
+
 #include <inttypes.h>
 #include <time.h>
 #include <sys/time.h>
@@ -27,6 +29,7 @@
 #include <stdbool.h>
 #include <stdlib.h>
 #include <stdio.h>
+#include <string.h>
 #include <signal.h>
 #include <sched.h>
 #include <limits.h>

lsinitrd.sh

@@ -108,6 +108,12 @@ if ! [[ -f "$image" ]]; then
     exit 1
 fi
 
+dracutlibdirs() {
+    for d in lib64/dracut lib/dracut usr/lib64/dracut usr/lib/dracut; do
+        echo "$d/$1"
+    done
+}
+
 extract_files()
 {
     (( ${#filenames[@]} == 1 )) && nofileinfo=1
@@ -124,7 +130,8 @@ extract_files()
 list_modules()
 {
     echo "dracut modules:"
-    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/modules.txt' 'usr/lib/dracut/modules.txt' 2>/dev/null
+    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+        $(dracutlibdirs modules.txt) 2>/dev/null
     ((ret+=$?))
 }
 
@@ -142,7 +149,7 @@ list_files()
 
 
 if (( ${#filenames[@]} <= 0 )); then
-    echo "Image: $image: $(du -h $image | while read a b; do echo $a;done)"
+    echo "Image: $image: $(du -h $image | while read a b || [ -n "$a" ]; do echo $a;done)"
     echo "========================================================================"
 fi
 
@@ -217,7 +224,8 @@ ret=0
 if (( ${#filenames[@]} > 0 )); then
     extract_files
 else
-    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/dracut-*' 'usr/lib/dracut/dracut-*' 2>/dev/null)
+    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+        $(dracutlibdirs 'dracut-*') 2>/dev/null)
     ((ret+=$?))
     echo "Version: $version"
     echo
@@ -226,7 +234,8 @@ else
         echo "========================================================================"
     else
         echo -n "Arguments: "
-        $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- 'lib/dracut/build-parameter.txt' 'usr/lib/dracut/build-parameter.txt' 2>/dev/null
+        $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
+            $(dracutlibdirs build-parameter.txt) 2>/dev/null
         echo
         list_modules
         list_files

modules.d/00systemd/module-setup.sh

@@ -51,14 +51,14 @@ install() {
         $systemdsystemunitdir/basic.target \
         $systemdsystemunitdir/halt.target \
         $systemdsystemunitdir/kexec.target \
-        $systemdsystemunitdir/initrd.target \
-        $systemdsystemunitdir/initrd-fs.target \
-        $systemdsystemunitdir/initrd-root-fs.target \
         $systemdsystemunitdir/local-fs.target \
         $systemdsystemunitdir/local-fs-pre.target \
         $systemdsystemunitdir/remote-fs.target \
         $systemdsystemunitdir/remote-fs-pre.target \
+        $systemdsystemunitdir/multi-user.target \
         $systemdsystemunitdir/network.target \
+        $systemdsystemunitdir/network-pre.target \
+        $systemdsystemunitdir/network-online.target \
         $systemdsystemunitdir/nss-lookup.target \
         $systemdsystemunitdir/nss-user-lookup.target \
         $systemdsystemunitdir/poweroff.target \
@@ -98,6 +98,7 @@ install() {
         $systemdsystemunitdir/systemd-journald.service \
         $systemdsystemunitdir/systemd-vconsole-setup.service \
         $systemdsystemunitdir/systemd-random-seed-load.service \
+        $systemdsystemunitdir/systemd-random-seed.service \
         $systemdsystemunitdir/systemd-sysctl.service \
         \
         $systemdsystemunitdir/sysinit.target.wants/systemd-modules-load.service \
@@ -115,19 +116,20 @@ install() {
         $systemdsystemunitdir/sysinit.target.wants/systemd-sysctl.service \
         \
         $systemdsystemunitdir/ctrl-alt-del.target \
+        $systemdsystemunitdir/reboot.target \
+        $systemdsystemunitdir/systemd-reboot.service \
         $systemdsystemunitdir/syslog.socket \
-        $systemdsystemunitdir/initrd-switch-root.target \
-        $systemdsystemunitdir/initrd-switch-root.service \
-        $systemdsystemunitdir/initrd-cleanup.service \
-        $systemdsystemunitdir/initrd-udevadm-cleanup-db.service \
-        $systemdsystemunitdir/initrd-parse-etc.service \
         \
         $systemdsystemunitdir/slices.target \
         $systemdsystemunitdir/system.slice \
         \
         $tmpfilesdir/systemd.conf \
         \
-        journalctl systemctl echo swapoff systemd-cgls systemd-tmpfiles
+        journalctl systemctl \
+        echo swapoff \
+        kmod insmod rmmod modprobe modinfo depmod lsmod \
+        mount umount reboot poweroff \
+        systemd-cgls systemd-tmpfiles
 
     inst_multiple -o \
         /usr/lib/modules-load.d/*.conf \
@@ -137,7 +139,7 @@ install() {
         local _line i
         for i in "$1"/*.conf; do
             [[ -f $i ]] || continue
-            while read _line; do
+            while read _line || [ -n "$_line" ]; do
                 case $_line in
                     \#*)
                         ;;
@@ -175,30 +177,15 @@ install() {
 
     # install adm user/group for journald
     inst_multiple nologin
-    egrep '^systemd-journal:' "$initdir/etc/passwd" 2>/dev/null >> "$initdir/etc/passwd"
+    egrep '^systemd-journal:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    egrep '^adm:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
     egrep '^systemd-journal:' /etc/group >> "$initdir/etc/group"
+    egrep '^wheel:' /etc/group >> "$initdir/etc/group"
+    egrep '^adm:' /etc/group >> "$initdir/etc/group"
 
     ln_r $systemdutildir/systemd "/init"
     ln_r $systemdutildir/systemd "/sbin/init"
 
-    inst_script "$moddir/dracut-emergency.sh" /bin/dracut-emergency
-    inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/emergency.service
-    inst_simple "$moddir/dracut-emergency.service" ${systemdsystemunitdir}/dracut-emergency.service
-    inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/rescue.service
-
-    ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target"
-
-    inst_script "$moddir/dracut-cmdline.sh" /bin/dracut-cmdline
-    inst_script "$moddir/dracut-cmdline-ask.sh" /bin/dracut-cmdline-ask
-    inst_script "$moddir/dracut-pre-udev.sh" /bin/dracut-pre-udev
-    inst_script "$moddir/dracut-pre-trigger.sh" /bin/dracut-pre-trigger
-    inst_script "$moddir/dracut-initqueue.sh" /bin/dracut-initqueue
-    inst_script "$moddir/dracut-pre-mount.sh" /bin/dracut-pre-mount
-    inst_script "$moddir/dracut-mount.sh" /bin/dracut-mount
-    inst_script "$moddir/dracut-pre-pivot.sh" /bin/dracut-pre-pivot
-
-    inst_script "$moddir/rootfs-generator.sh" $systemdutildir/system-generators/dracut-rootfs-generator
-
     inst_binary true
     ln_r $(type -P true) "/usr/bin/loginctl"
     ln_r $(type -P true) "/bin/loginctl"
@@ -211,8 +198,7 @@ install() {
 
     for i in \
         emergency.target \
-        dracut-emergency.service \
+        rescue.target \
-        rescue.service \
         systemd-ask-password-console.service \
         systemd-ask-password-plymouth.service \
         ; do
@@ -221,24 +207,6 @@ install() {
             "${systemdsystemunitdir}/${i}.wants/systemd-vconsole-setup.service"
     done
 
-    mkdir -p "${initdir}/$systemdsystemunitdir/initrd.target.wants"
-    for i in \
-        dracut-cmdline.service \
-        dracut-cmdline-ask.service \
-        dracut-initqueue.service \
-        dracut-mount.service \
-        dracut-pre-mount.service \
-        dracut-pre-pivot.service \
-        dracut-pre-trigger.service \
-        dracut-pre-udev.service \
-        ; do
-        inst_simple "$moddir/${i}" "$systemdsystemunitdir/${i}"
-        ln_r "$systemdsystemunitdir/${i}" "$systemdsystemunitdir/initrd.target.wants/${i}"
-    done
-
-    inst_simple "$moddir/dracut-tmpfiles.conf" "$tmpfilesdir/dracut-tmpfiles.conf"
-
-
     mkdir -p "$initdir/etc/systemd"
     # turn off RateLimit for journal
     {
@@ -247,5 +215,6 @@ install() {
         echo "RateLimitBurst=0"
     } >> "$initdir/etc/systemd/journald.conf"
 
+    ln_r "${systemdsystemunitdir}/multi-user.target" "${systemdsystemunitdir}/default.target"
 }
 

modules.d/01fips/fips.sh

@@ -59,8 +59,8 @@ do_rhevh_check()
     kpath=${1}
 
     # If we're on RHEV-H, the kernel is in /run/initramfs/live/vmlinuz0
-    HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b; do printf "%s\n" $a; done)
+    HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done)
-    HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b; do printf "%s\n" $a; done || return 1)
+    HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done || return 1)
     if [ -z "$HMAC_SUM_ORIG" ] || [ -z "$HMAC_SUM_CALC" ] || [ "${HMAC_SUM_ORIG}" != "${HMAC_SUM_CALC}" ]; then
         warn "HMAC sum mismatch"
         return 1
@@ -92,7 +92,7 @@ do_fips()
             if ! modprobe "${_module}"; then
                 # check if kernel provides generic algo
                 _found=0
-                while read _k _s _v; do
+                while read _k _s _v || [ -n "$_k" ]; do
                     [ "$_k" != "name" -a "$_k" != "driver" ] && continue
                     [ "$_v" != "$_module" ] && continue
                     _found=1

modules.d/01fips/module-setup.sh

@@ -14,10 +14,11 @@ depends() {
 installkernel() {
     local _fipsmodules _mod
     _fipsmodules="aead aes_generic aes-x86_64 ansi_cprng arc4 blowfish camellia cast6 cbc ccm "
-    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod "
+    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod drbg "
     _fipsmodules+="ecb eseqiv fcrypt gcm ghash_generic hmac khazad lzo md4 md5 michael_mic rmd128 "
     _fipsmodules+="rmd160 rmd256 rmd320 rot13 salsa20 seed seqiv serpent sha1 sha224 sha256 sha256_generic "
     _fipsmodules+="sha384 sha512 sha512_generic tcrypt tea tnepres twofish wp256 wp384 wp512 xeta xtea xts zlib"
+    _fipsmodules+="aes_s390 des_s390 prng sha256_s390 sha_common des_check_key ghash_s390 sha1_s390 sha512_s390"
 
     mkdir -m 0755 -p "${initdir}/etc/modprobe.d"
 

modules.d/01systemd-initrd/module-setup.sh

@@ -0,0 +1,68 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    [[ $mount_needs ]] && return 1
+
+    if ! dracut_module_included "systemd"; then
+        derror "dracut-systemd needs systemd in the initramfs"
+        return 1
+    fi
+
+    return 0
+}
+
+# called by dracut
+depends() {
+    echo "systemd"
+}
+
+installkernel() {
+    return 0
+}
+
+# called by dracut
+install() {
+    local _mods
+
+    inst_multiple -o \
+        $systemdsystemunitdir/initrd.target \
+        $systemdsystemunitdir/initrd-fs.target \
+        $systemdsystemunitdir/initrd-root-fs.target \
+        $systemdsystemunitdir/initrd-switch-root.target \
+        $systemdsystemunitdir/initrd-switch-root.service \
+        $systemdsystemunitdir/initrd-cleanup.service \
+        $systemdsystemunitdir/initrd-udevadm-cleanup-db.service \
+        $systemdsystemunitdir/initrd-parse-etc.service
+
+    ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target"
+
+    if [ -e /etc/os-release ]; then
+        . /etc/os-release
+        VERSION+=" "
+        PRETTY_NAME+=" "
+    else
+        VERSION=""
+        PRETTY_NAME=""
+    fi
+    NAME=dracut
+    ID=dracut
+    VERSION+="dracut-$DRACUT_VERSION"
+    PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)"
+    VERSION_ID=$DRACUT_VERSION
+    ANSI_COLOR="0;34"
+
+    {
+        echo NAME=\"$NAME\"
+        echo VERSION=\"$VERSION\"
+        echo ID=$ID
+        echo VERSION_ID=$VERSION_ID
+        echo PRETTY_NAME=\"$PRETTY_NAME\"
+        echo ANSI_COLOR=\"$ANSI_COLOR\"
+    } > $initdir/usr/lib/initrd-release
+    echo dracut-$DRACUT_VERSION > $initdir/lib/dracut/dracut-$DRACUT_VERSION
+    ln -sf ../usr/lib/initrd-release $initdir/etc/initrd-release
+    ln -sf initrd-release $initdir/usr/lib/os-release
+    ln -sf initrd-release $initdir/etc/os-release
+}
+

modules.d/02caps/caps.sh

@@ -4,7 +4,7 @@ capsmode=$(getarg rd.caps)
 
 if [ "$capsmode" = "1" ]; then
     CAPS_INIT_DROP=$(getarg rd.caps.initdrop=)
-    CAPS_USERMODEHELPER_BSET=$(capsh --drop="$CAPS_INIT_DROP" -- -c 'while read a b ; do [ "$a" = "CapBnd:" ] && echo $((0x${b:$((${#b}-8)):8})) $((0x${b:$((${#b}-16)):8})) && break; done < /proc/self/status')
+    CAPS_USERMODEHELPER_BSET=$(capsh --drop="$CAPS_INIT_DROP" -- -c 'while read a b  || [ -n "$a" ]; do [ "$a" = "CapBnd:" ] && echo $((0x${b:$((${#b}-8)):8})) $((0x${b:$((${#b}-16)):8})) && break; done < /proc/self/status')
     CAPS_MODULES_DISABLED=$(getarg rd.caps.disablemodules=)
     CAPS_KEXEC_DISABLED=$(getarg rd.caps.disablekexec=)
 

modules.d/02systemd-networkd/module-setup.sh

@@ -0,0 +1,71 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    [[ $mount_needs ]] && return 1
+
+    if ! dracut_module_included "systemd"; then
+        derror "dracut-systemd needs systemd in the initramfs"
+        return 1
+    fi
+
+    return 255
+}
+
+# called by dracut
+depends() {
+    echo "systemd kernel-network-modules"
+}
+
+installkernel() {
+    return 0
+}
+
+# called by dracut
+install() {
+    inst_multiple -o \
+        $systemdutildir/systemd-networkd \
+        $systemdutildir/systemd-networkd-wait-online \
+        $systemdsystemunitdir/systemd-networkd-wait-online.service \
+        $systemdsystemunitdir/systemd-networkd.service \
+        $systemdsystemunitdir/systemd-networkd.socket \
+        $systemdutildir/network/99-default.link \
+        networkctl ip
+
+        #hostnamectl timedatectl
+        # $systemdutildir/systemd-timesyncd \
+        # $systemdutildir/systemd-timedated \
+        # $systemdutildir/systemd-hostnamed \
+        # $systemdutildir/systemd-resolvd \
+        # $systemdutildir/systemd-resolve-host \
+        # $systemdsystemunitdir/systemd-resolved.service \
+        # $systemdsystemunitdir/systemd-hostnamed.service \
+        # $systemdsystemunitdir/systemd-timesyncd.service \
+        # $systemdsystemunitdir/systemd-timedated.service \
+        # $systemdsystemunitdir/time-sync.target \
+        # /etc/systemd/resolved.conf \
+
+
+    # inst_dir /var/lib/systemd/clock
+
+    egrep '^systemd-network:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    egrep '^systemd-network:' /etc/group >> "$initdir/etc/group"
+    # egrep '^systemd-timesync:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
+    # egrep '^systemd-timesync:' /etc/group >> "$initdir/etc/group"
+
+    _arch=$(uname -m)
+    inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_myhostname.so.*" \
+                     {"tls/$_arch/",tls/,"$_arch/",}"libnss_resolve.so.*"
+
+    for i in \
+        systemd-networkd-wait-online.service \
+            systemd-networkd.service \
+            systemd-networkd.socket
+#            systemd-timesyncd.service
+    do
+        systemctl --root "$initdir" enable "$i"
+    done
+}
+

modules.d/10i18n/module-setup.sh

@@ -40,7 +40,7 @@ install() {
             *) cmd=grep ;;
         esac
 
-        for INCL in $($cmd "^include " $MAP | while read a a b; do echo ${a//\"/}; done); do
+        for INCL in $($cmd "^include " $MAP | while read a a b || [ -n "$a" ]; do echo ${a//\"/}; done); do
             for FN in $(find ${kbddir}/keymaps -type f -name $INCL\*); do
                 findkeymap $FN
             done
@@ -114,12 +114,12 @@ install() {
         rm -f -- "${initdir}${kbddir}/consoletrans/utflist"
         find "${initdir}${kbddir}/" -name README\* -delete
         find "${initdir}${kbddir}/" -name '*.gz' -print -quit \
-            | while read line; do
+            | while read line || [ -n "$line" ]; do
             inst_multiple gzip
             done
 
         find "${initdir}${kbddir}/" -name '*.bz2' -print -quit \
-            | while read line; do
+            | while read line || [ -n "$line" ]; do
             inst_multiple bzip2
             done
     }

modules.d/30convertfs/convertfs.sh

@@ -74,7 +74,7 @@ rm -f -- "$testfile"
 find_mount() {
     local dev mnt etc wanted_dev
     wanted_dev="$(readlink -e -q $1)"
-    while read dev mnt etc; do
+    while read dev mnt etc || [ -n "$dev" ]; do
         [ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
     done < /proc/mounts
     return 1
@@ -93,7 +93,7 @@ else
             return 1
         fi
 
-        while read a m a; do
+        while read a m a || [ -n "$m" ]; do
             [ "$m" = "$1" ] && return 0
         done < /proc/mounts
         return 1

modules.d/40network/dhclient-script.sh

@@ -43,7 +43,13 @@ setup_interface() {
         valid_lft ${lease_time} preferred_lft ${lease_time} \
         dev $netif
 
-    [ -n "$gw" ] && echo ip route replace default via $gw dev $netif > /tmp/net.$netif.gw
+    if [ -n "$gw" ] ; then
+        if [ "$mask" == "255.255.255.255" ] ; then
+            # point-to-point connection => set explicit route to gateway
+            echo ip route add $gw dev $netif > /tmp/net.$netif.gw
+        fi
+        echo ip route replace default via $gw dev $netif >> /tmp/net.$netif.gw
+    fi
 
     [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
     if  [ -n "$namesrv" ] ; then
@@ -93,8 +99,9 @@ case $reason in
         ;;
 
     PREINIT6)
-        echo "dhcp: PREINIT $netif up"
+        echo "dhcp: PREINIT6 $netif up"
         linkup $netif
+        wait_for_ipv6_dad $netif
         ;;
 
     BOUND)
@@ -111,7 +118,7 @@ case $reason in
         fi
         unset layer2
         setup_interface
-        set | while read line; do
+        set | while read line || [ -n "$line" ]; do
             [ "${line#new_}" = "$line" ] && continue
             echo "$line"
         done >/tmp/dhclient.$netif.dhcpopts
@@ -132,7 +139,7 @@ case $reason in
         echo "dhcp: BOND6 setting $netif"
         setup_interface6
 
-        set | while read line; do
+        set | while read line || [ -n "$line" ]; do
             [ "${line#new_}" = "$line" ] && continue
             echo "$line"
         done >/tmp/dhclient.$netif.dhcpopts

modules.d/40network/module-setup.sh

@@ -11,61 +11,13 @@ check() {
 
 # called by dracut
 depends() {
+    echo "kernel-network-modules"
     return 0
 }
 
 # called by dracut
 installkernel() {
-    # Include wired net drivers, excluding wireless
+    return 0
-    local _arch=$(uname -m)
-
-    net_module_filter() {
-        local _net_drivers='eth_type_trans|register_virtio_device|usbnet_open'
-        local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
-        local _ret
-        # subfunctions inherit following FDs
-        local _merge=8 _side2=9
-        function nmf1() {
-            local _fname _fcont
-            while read _fname; do
-                [[ $_fname =~ $_unwanted_drivers ]] && continue
-                case "$_fname" in
-                    *.ko)    _fcont="$(<        $_fname)" ;;
-                    *.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
-                    *.ko.xz) _fcont="$(xz -dc   $_fname)" ;;
-                esac
-                [[   $_fcont =~ $_net_drivers
-                && ! $_fcont =~ iw_handler_get_spy ]] \
-                && echo "$_fname"
-            done
-            return 0
-        }
-        function rotor() {
-            local _f1 _f2
-            while read _f1; do
-                echo "$_f1"
-                if read _f2; then
-                    echo "$_f2" 1>&${_side2}
-                fi
-            done | nmf1 1>&${_merge}
-            return 0
-        }
-        # Use two parallel streams to filter alternating modules.
-        set +x
-        eval "( ( rotor ) ${_side2}>&1 | nmf1 ) ${_merge}>&1"
-        [[ $debug ]] && set -x
-        return 0
-    }
-
-    { find_kernel_modules_by_path drivers/net; if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then find_kernel_modules_by_path drivers/s390/net; fi; } \
-        | net_module_filter | instmods
-
-    #instmods() will take care of hostonly
-    instmods \
-        =drivers/net/phy \
-        =drivers/net/team \
-        =drivers/net/ethernet \
-        ecb arc4 bridge stp llc ipv6 bonding 8021q af_packet virtio_net
 }
 
 # called by dracut

modules.d/40network/net-lib.sh

@@ -94,13 +94,13 @@ setup_net() {
     [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
     [ -z "$IFACES" ] && IFACES="$netif"
     # run the scripts written by ifup
-    [ -e /tmp/net.$netif.gw ]            && . /tmp/net.$netif.gw
     [ -e /tmp/net.$netif.hostname ]      && . /tmp/net.$netif.hostname
     [ -e /tmp/net.$netif.override ]      && . /tmp/net.$netif.override
     [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
     # set up resolv.conf
     [ -e /tmp/net.$netif.resolv.conf ] && \
         cp -f /tmp/net.$netif.resolv.conf /etc/resolv.conf
+    [ -e /tmp/net.$netif.gw ]            && . /tmp/net.$netif.gw
 
     # add static route
     for _p in $(getargs rd.route); do
@@ -520,7 +520,7 @@ wait_for_ipv6_dad() {
     local cnt=0
     local li
     while [ $cnt -lt 500 ]; do
-        li=$(ip -6 addr show dev $1)
+        li=$(ip -6 addr show dev $1 scope link)
         strstr "$li" "tentative" || return 0
         sleep 0.1
         cnt=$(($cnt+1))
@@ -554,13 +554,18 @@ type hostname >/dev/null 2>&1 || \
 }
 
 iface_has_link() {
+    local cnt=0
     local interface="$1" flags=""
     [ -n "$interface" ] || return 2
     interface="/sys/class/net/$interface"
     [ -d "$interface" ] || return 2
     linkup "$1"
-    [ "$(cat $interface/carrier)" = 1 ] || return 1
+    while [ $cnt -lt 50 ]; do
-    # XXX Do we need to reset the flags here? anaconda never bothered..
+        [ "$(cat $interface/carrier)" = 1 ] && return 0
+        sleep 0.1
+        cnt=$(($cnt+1))
+    done
+    return 1
 }
 
 find_iface_with_link() {

modules.d/45ifcfg/write-ifcfg.sh

@@ -22,7 +22,7 @@ get_config_line_by_subchannel()
     local line
 
     CHANNELS="$1"
-    while read line; do
+    while read line || [ -n "$line" ]; do
         if strstr "$line" "$CHANNELS"; then
             echo $line
             return 0
@@ -137,6 +137,8 @@ for netup in /tmp/net.*.did-setup ; do
     unset macaddr
     unset slave
     unset ethname
+    unset vlan
+
     [ -e /tmp/bond.${netif}.info ] && . /tmp/bond.${netif}.info
 
     uuid=$(cat /proc/sys/kernel/random/uuid)

modules.d/45url-lib/url-lib.sh

@@ -120,7 +120,7 @@ command -v ctorrent >/dev/null \
 
 nfs_already_mounted() {
     local server="$1" path="$2" localdir="" s="" p=""
-    cat /proc/mounts | while read src mnt rest; do
+    cat /proc/mounts | while read src mnt rest || [ -n "$src" ]; do
         splitsep ":" "$src" s p
         if [ "$server" = "$s" ]; then
             if [ "$path" = "$p" ]; then

modules.d/50drm/module-setup.sh

@@ -22,7 +22,7 @@ installkernel() {
         local _merge=8 _side2=9
         function nmf1() {
             local _fname _fcont
-            while read _fname; do
+            while read _fname || [ -n "$_fname" ]; do
                 case "$_fname" in
                     *.ko)    _fcont="$(<        $_fname)" ;;
                     *.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
@@ -35,7 +35,7 @@ installkernel() {
         }
         function rotor() {
             local _f1 _f2
-            while read _f1; do
+            while read _f1 || [ -n "$_f1" ]; do
                 echo "$_f1"
                 if read _f2; then
                     echo "$_f2" 1>&${_side2}
@@ -60,6 +60,8 @@ installkernel() {
             ${NULL}
     fi
 
+    instmods amdkfd hyperv_fb
+
     for _modname in $(find_kernel_modules_by_path drivers/gpu/drm \
         | drm_module_filter) ; do
         # if the hardware is present, include module even if it is not currently loaded,
@@ -68,6 +70,10 @@ installkernel() {
         if [[ $hostonly ]] && modinfo -F alias $_modname | sed -e 's,\?,\.,g' -e 's,\*,\.\*,g' \
             | grep -qxf - /sys/bus/{pci/devices,soc/devices/soc?}/*/modalias 2>/dev/null; then
             hostonly='' instmods $_modname
+            # if radeon.ko is installed, we want amdkfd also
+            if strstr "$_modname" radeon.ko; then
+                hostonly='' instmods amdkfd
+            fi
             continue
         fi
         instmods $_modname

modules.d/50plymouth/module-setup.sh

@@ -3,7 +3,7 @@
 # called by dracut
 check() {
     [[ "$mount_needs" ]] && return 1
-    require_binaries plymouthd plymouth
+    require_binaries plymouthd plymouth plymouth-set-default-theme
 }
 
 # called by dracut

modules.d/50plymouth/plymouth-populate-initrd.sh

@@ -26,7 +26,7 @@ if [[ $hostonly ]]; then
     if [ -L /usr/share/plymouth/themes/default.plymouth ]; then
         inst /usr/share/plymouth/themes/default.plymouth
         # Install plugin for this theme
-        PLYMOUTH_PLUGIN=$(grep "^ModuleName=" /usr/share/plymouth/themes/default.plymouth | while read a b c; do echo $b; done;)
+        PLYMOUTH_PLUGIN=$(grep "^ModuleName=" /usr/share/plymouth/themes/default.plymouth | while read a b c || [ -n "$b" ]; do echo $b; done;)
         inst_libdir_file "plymouth/${PLYMOUTH_PLUGIN}.so"
     fi
 else

modules.d/80cms/cmssetup.sh

@@ -42,7 +42,7 @@ function dasd_settle() {
 }
 
 function dasd_settle_all() {
-    for dasdccw in $(while read line; do echo "${line%%(*}"; done < /proc/dasd/devices) ; do
+    for dasdccw in $(while read line || [ -n "$line" ]; do echo "${line%%(*}"; done < /proc/dasd/devices) ; do
         if ! dasd_settle $dasdccw ; then
             echo $"Could not access DASD $dasdccw in time"
             return 1
@@ -84,7 +84,7 @@ function readcmsfile() # $1=dasdport $2=filename
     #               dasd_mod must be loaded without setting any DASD online
     dev=$(canonicalize_devno $1)
     numcpus=$(
-        while read line; do
+        while read line || [ -n "$line" ]; do
             if strstr "$line" "# processors"; then
                 echo ${line##*:};
                 break;
@@ -181,7 +181,7 @@ processcmsfile()
 
     unset _do_zfcp
     for i in ${!FCP_*}; do
-        echo "${!i}" | while read port rest; do
+        echo "${!i}" | while read port rest || [ -n "$port" ]; do
             case $port in
                 *.*.*)
                     ;;

modules.d/90crypt/crypt-lib.sh

@@ -7,7 +7,7 @@ crypttab_contains() {
     local luks="$1"
     local l d rest
     if [ -f /etc/crypttab ]; then
-        while read l d rest; do
+        while read l d rest || [ -n "$l" ]; do
             strstr "${l##luks-}" "${luks##luks-}" && return 0
             strstr "$d" "${luks##luks-}" && return 0
         done < /etc/crypttab
@@ -42,10 +42,10 @@ ask_for_password() {
 
     while [ $# -gt 0 ]; do
         case "$1" in
-            --cmd) ply_cmd="$2"; tty_cmd="$2" shift;;
+            --cmd) ply_cmd="$2"; tty_cmd="$2"; shift;;
             --ply-cmd) ply_cmd="$2"; shift;;
             --tty-cmd) tty_cmd="$2"; shift;;
-            --prompt) ply_prompt="$2"; tty_prompt="$2" shift;;
+            --prompt) ply_prompt="$2"; tty_prompt="$2"; shift;;
             --ply-prompt) ply_prompt="$2"; shift;;
             --tty-prompt) tty_prompt="$2"; shift;;
             --tries) ply_tries="$2"; tty_tries="$2"; shift;;
@@ -155,7 +155,7 @@ getkey() {
     [ -f "$keys_file" ] || return 1
 
     local IFS=:
-    while read luks_dev key_dev key_path; do
+    while read luks_dev key_dev key_path || [ -n "$luks_dev" ]; do
         if match_dev "$luks_dev" "$for_dev"; then
             echo "${key_dev}:${key_path}"
             return 0

modules.d/90crypt/cryptroot-ask.sh

@@ -23,7 +23,7 @@ numtries=${3:-10}
 
 # TODO: improve to support what cmdline does
 if [ -f /etc/crypttab ] && getargbool 1 rd.luks.crypttab -d -n rd_NO_CRYPTTAB; then
-    while read name dev luksfile luksoptions; do
+    while read name dev luksfile luksoptions || [ -n "$name" ]; do
         # ignore blank lines and comments
         if [ -z "$name" -o "${name#\#}" != "$name" ]; then
             continue

modules.d/90crypt/module-setup.sh

@@ -35,7 +35,7 @@ cmdline() {
 
         UUID=$(
             blkid -u crypto -o export $dev \
-                | while read line; do
+                | while read line || [ -n "$line" ]; do
                 [[ ${line#UUID} = $line ]] && continue
                 printf "%s" "${line#UUID=}"
                 break
@@ -65,7 +65,7 @@ install() {
 
     if [[ $hostonly ]] && [[ -f /etc/crypttab ]]; then
         # filter /etc/crypttab for the devices we need
-        while read _mapper _dev _rest; do
+        while read _mapper _dev _rest || [ -n "$_mapper" ]; do
             [[ $_mapper = \#* ]] && continue
             [[ $_dev ]] || continue
 

modules.d/90crypt/parse-crypt.sh

@@ -14,6 +14,12 @@ else
     LUKS=$(getargs rd.luks.uuid -d rd_LUKS_UUID)
     tout=$(getarg rd.luks.key.tout)
 
+    if [ -e /etc/crypttab ]; then
+        while read _mapper _dev _rest ; do
+            set_systemd_timeout_for_dev $_dev
+        done < /etc/crypttab
+    fi
+
     if [ -n "$LUKS" ]; then
         for luksid in $LUKS; do
 

modules.d/90dm/dm-shutdown.sh

@@ -1,11 +1,12 @@
 #!/bin/sh
 
 _do_dm_shutdown() {
-    local ret
+    local ret=0
     local final=$1
     info "Disassembling device-mapper devices"
-    dmsetup -v remove_all
+    for dev in $(dmsetup info -c --noheadings -o name) ; do
-    ret=$?
+        dmsetup -v --noudevsync remove "$dev" || ret=$?
+    done
     if [ "x$final" != "x" ]; then
         info "dmsetup ls --tree"
         dmsetup ls --tree 2>&1 | vinfo

modules.d/90dmraid/dmraid.sh

@@ -37,6 +37,7 @@ if [ -n "$DM_RAIDS" ] || getargbool 0 rd.auto; then
             info "Activating $s"
             dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
             [ -e "/dev/mapper/$s" ] && kpartx -a "/dev/mapper/$s" 2>&1 | vinfo
+            udevsettle
         done
     fi
 

modules.d/90dmsquash-live/apply-live-updates.sh

@@ -1,17 +1,20 @@
 #!/bin/sh
 
-if [ -b /dev/mapper/live-rw ] && [ -d /updates ]; then
+if [ -b /dev/mapper/live-rw ] && [ -d /run/initramfs/live/updates -o -d /updates ]; then
     info "Applying updates to live image..."
     mount -o bind /run $NEWROOT/run
     # avoid overwriting symlinks (e.g. /lib -> /usr/lib) with directories
-    (
+    for d in /updates /run/initramfs/live/updates; do
-        cd /updates
+        [ -d "$d" ] || continue
-        find . -depth -type d | while read dir; do
+        (
-            mkdir -p "$NEWROOT/$dir"
+            cd $d
-        done
+            find . -depth -type d | while read dir; do
-        find . -depth \! -type d | while read file; do
+                mkdir -p "$NEWROOT/$dir"
-            cp -a "$file" "$NEWROOT/$file"
+            done
-        done
+            find . -depth \! -type d | while read file; do
-    )
+                cp -a "$file" "$NEWROOT/$file"
+            done
+        )
+    done
     umount $NEWROOT/run
 fi

modules.d/90dmsquash-live/dmsquash-live-root.sh

@@ -30,6 +30,8 @@ getargbool 0 rd.writable.fsimg -d -y writable_fsimg && writable_fsimg="yes"
 overlay_size=$(getarg rd.live.overlay.size=)
 [ -z "$overlay_size" ] && overlay_size=512
 
+getargbool 0 rd.live.overlay.thin && thin_snapshot="yes"
+
 # CD/DVD media check
 [ -b $livedev ] && fs=$(blkid -s TYPE -o value $livedev)
 if [ "$fs" = "iso9660" -o "$fs" = "udf" ]; then
@@ -146,7 +148,31 @@ do_live_overlay() {
         base=$BASE_LOOPDEV
         over=$OVERLAY_LOOPDEV
     fi
-    echo 0 $sz snapshot $base $over p 8 | dmsetup create live-rw
+
+    if [ -n "$thin_snapshot" ]; then
+        modprobe dm_thin_pool
+        mkdir /run/initramfs/thin-overlay
+
+        # In block units (512b)
+        thin_data_sz=$(( $overlay_size * 1024 * 1024 / 512 ))
+        thin_meta_sz=$(( $thin_data_sz / 10 ))
+
+        # It is important to have the backing file on a tmpfs
+        # this is needed to let the loopdevice support TRIM
+        dd if=/dev/null of=/run/initramfs/thin-overlay/meta bs=1b count=1 seek=$((thin_meta_sz)) 2> /dev/null
+        dd if=/dev/null of=/run/initramfs/thin-overlay/data bs=1b count=1 seek=$((thin_data_sz)) 2> /dev/null
+
+        THIN_META_LOOPDEV=$( losetup --show -f /run/initramfs/thin-overlay/meta )
+        THIN_DATA_LOOPDEV=$( losetup --show -f /run/initramfs/thin-overlay/data )
+
+        echo 0 $thin_data_sz thin-pool $THIN_META_LOOPDEV $THIN_DATA_LOOPDEV 1024 1024 | dmsetup create live-overlay-pool
+        dmsetup message /dev/mapper/live-overlay-pool 0 "create_thin 0"
+
+        # Create a snapshot of the base image
+        echo 0 $sz thin /dev/mapper/live-overlay-pool 0 $base | dmsetup create live-rw
+    else
+        echo 0 $sz snapshot $base $over p 8 | dmsetup create live-rw
+    fi
 
     # Create a device that always points to a ro base image
     echo 0 $sz linear $base 0 | dmsetup create --readonly live-base
@@ -174,29 +200,6 @@ if [ -n "$OSMINSQFS" ]; then
     umount -l /run/initramfs/squashfs.osmin
 fi
 
-# we might have an embedded fs image to use as rootfs (uncompressed live)
-if [ -e /run/initramfs/live/${live_dir}/ext3fs.img ]; then
-    FSIMG="/run/initramfs/live/${live_dir}/ext3fs.img"
-elif [ -e /run/initramfs/live/${live_dir}/rootfs.img ]; then
-    FSIMG="/run/initramfs/live/${live_dir}/rootfs.img"
-fi
-
-if [ -n "$FSIMG" ] ; then
-    BASE_LOOPDEV=$( losetup -f )
-
-    if [ -n "$writable_fsimg" ] ; then
-        # mount the provided fileysstem read/write
-        echo "Unpacking live filesystem (may take some time)"
-        unpack_archive $FSIMG /run/initramfs/fsimg/
-        losetup $BASE_LOOPDEV /run/initramfs/fsimg/rootfs.img
-        echo "0 $( blockdev --getsize $BASE_LOOPDEV ) linear $BASE_LOOPDEV 0" | dmsetup create live-rw
-    else
-        # mount the filesystem read-only and add a dm snapshot for writes
-        losetup -r $BASE_LOOPDEV $FSIMG
-        do_live_from_base_loop
-    fi
-fi
-
 # we might have an embedded fs image on squashfs (compressed live)
 if [ -e /run/initramfs/live/${live_dir}/${squash_image} ]; then
     SQUASHED="/run/initramfs/live/${live_dir}/${squash_image}"
@@ -217,18 +220,42 @@ if [ -e "$SQUASHED" ] ; then
     mkdir -m 0755 -p /run/initramfs/squashfs
     mount -n -t squashfs -o ro $SQUASHED_LOOPDEV /run/initramfs/squashfs
 
-    BASE_LOOPDEV=$( losetup -f )
-    if [ -f /run/initramfs/squashfs/LiveOS/ext3fs.img ]; then
-        losetup -r $BASE_LOOPDEV /run/initramfs/squashfs/LiveOS/ext3fs.img
-    elif [ -f /run/initramfs/squashfs/LiveOS/rootfs.img ]; then
-        losetup -r $BASE_LOOPDEV /run/initramfs/squashfs/LiveOS/rootfs.img
-    fi
-
-    umount -l /run/initramfs/squashfs
-
-    do_live_from_base_loop
 fi
 
+# we might have an embedded fs image to use as rootfs (uncompressed live)
+if [ -e /run/initramfs/live/${live_dir}/ext3fs.img ]; then
+    FSIMG="/run/initramfs/live/${live_dir}/ext3fs.img"
+elif [ -e /run/initramfs/live/${live_dir}/rootfs.img ]; then
+    FSIMG="/run/initramfs/live/${live_dir}/rootfs.img"
+elif [ -f /run/initramfs/squashfs/LiveOS/ext3fs.img ]; then
+    FSIMG="/run/initramfs/squashfs/LiveOS/ext3fs.img"
+elif [ -f /run/initramfs/squashfs/LiveOS/rootfs.img ]; then
+    FSIMG="/run/initramfs/squashfs/LiveOS/rootfs.img"
+fi
+
+if [ -n "$FSIMG" ] ; then
+    BASE_LOOPDEV=$( losetup -f )
+
+    if [ -n "$writable_fsimg" ] ; then
+        # mount the provided fileysstem read/write
+        echo "Unpacking live filesystem (may take some time)"
+        mkdir /run/initramfs/fsimg/
+        if [ -n "$SQUASHED" ]; then
+            cp -v $FSIMG /run/initramfs/fsimg/rootfs.img
+        else
+            unpack_archive $FSIMG /run/initramfs/fsimg/
+        fi
+        losetup $BASE_LOOPDEV /run/initramfs/fsimg/rootfs.img
+        echo "0 $( blockdev --getsize $BASE_LOOPDEV ) linear $BASE_LOOPDEV 0" | dmsetup create live-rw
+    else
+        # mount the filesystem read-only and add a dm snapshot for writes
+        losetup -r $BASE_LOOPDEV $FSIMG
+        do_live_from_base_loop
+    fi
+fi
+
+[ -e "$SQUASHED" ] && umount -l /run/initramfs/squashfs
+
 if [ -b "$OSMIN_LOOPDEV" ]; then
     # set up the devicemapper snapshot device, which will merge
     # the normal live fs image, and the delta, into a minimzied fs image
@@ -241,7 +268,10 @@ if [ -n "$ROOTFLAGS" ]; then
 fi
 
 ln -s /dev/mapper/live-rw /dev/root
-printf 'mount %s /dev/mapper/live-rw %s\n' "$ROOTFLAGS" "$NEWROOT" > $hookdir/mount/01-$$-live.sh
+
+if [ -z "$DRACUT_SYSTEMD" ]; then
+    printf 'mount %s /dev/mapper/live-rw %s\n' "$ROOTFLAGS" "$NEWROOT" > $hookdir/mount/01-$$-live.sh
+fi
 
 need_shutdown
 

modules.d/90dmsquash-live/module-setup.sh

@@ -22,7 +22,7 @@ installkernel() {
 
 # called by dracut
 install() {
-    inst_multiple umount dmsetup blkid dd losetup grep blockdev
+    inst_multiple umount dmsetup blkid dd losetup grep blockdev find
     inst_multiple -o checkisomd5
     inst_hook cmdline 30 "$moddir/parse-dmsquash-live.sh"
     inst_hook cmdline 31 "$moddir/parse-iso-scan.sh"
@@ -31,6 +31,7 @@ install() {
     inst_hook pre-pivot 20 "$moddir/apply-live-updates.sh"
     inst_script "$moddir/dmsquash-live-root.sh" "/sbin/dmsquash-live-root"
     inst_script "$moddir/iso-scan.sh" "/sbin/iso-scan"
+    inst_script "$moddir/dmsquash-generator.sh" $systemdutildir/system-generators/dracut-dmsquash-generator
     # should probably just be generally included
     inst_rules 60-cdrom_id.rules
     inst_simple "$moddir/checkisomd5@.service" "/etc/systemd/system/checkisomd5@.service"

modules.d/90dmsquash-live/parse-dmsquash-live.sh

@@ -13,7 +13,7 @@ if [ "${root%%:*}" = "live" ] ; then
     liveroot=$root
 fi
 
-[ "${liveroot%%:*}" = "live" ] || return
+[ "${liveroot%%:*}" = "live" ] || return 1
 
 modprobe -q loop
 
@@ -49,9 +49,14 @@ case "$liveroot" in
     live:/*.[Ii][Mm][Gg]|/*.[Ii][Mm][Gg])
         [ -f "${root#live:}" ] && rootok=1 ;;
 esac
+
+[ "$rootok" = "1" ] || return 1
+
 info "root was $liveroot, is now $root"
 
 # make sure that init doesn't complain
 [ -z "$root" ] && root="live"
 
 wait_for_dev -n /dev/mapper/live-rw
+
+return 0

modules.d/90kernel-modules/module-setup.sh

@@ -9,7 +9,7 @@ installkernel() {
             local _merge=8 _side2=9
             function bmf1() {
                 local _f
-                while read _f; do case "$_f" in
+                while read _f || [ -n "$_f" ]; do case "$_f" in
                     *.ko)    [[ $(<         $_f) =~ $_blockfuncs ]] && echo "$_f" ;;
                     *.ko.gz) [[ $(gzip -dc <$_f) =~ $_blockfuncs ]] && echo "$_f" ;;
                     *.ko.xz) [[ $(xz -dc   <$_f) =~ $_blockfuncs ]] && echo "$_f" ;;
@@ -19,7 +19,7 @@ installkernel() {
             }
             function rotor() {
                 local _f1 _f2
-                while read _f1; do
+                while read _f1 || [ -n "$_f1" ]; do
                     echo "$_f1"
                     if read _f2; then
                         echo "$_f2" 1>&${_side2}
@@ -41,10 +41,13 @@ installkernel() {
             uhci-hcd \
             xhci-hcd xhci-pci xhci-plat-hcd
 
+        instmods \
+            "=drivers/hid" \
+            "=drivers/input/serio" \
+            "=drivers/input/keyboard"
+
         instmods yenta_socket scsi_dh_rdac scsi_dh_emc scsi_dh_alua \
-            atkbd i8042 usbhid hid-apple hid-sunplus hid-cherry hid-logitech \
+                 atkbd i8042 usbhid firewire-ohci pcmcia hv-vmbus
-            hid-logitech-dj hid-microsoft hid-lcpower firewire-ohci \
-            pcmcia hid-hyperv hv-vmbus hyperv-keyboard
 
         if [[ "$(uname -p)" == arm* ]]; then
             # arm specific modules

modules.d/90kernel-network-modules/module-setup.sh

@@ -0,0 +1,71 @@
+#!/bin/bash
+
+# called by dracut
+check() {
+    return 255
+}
+
+# called by dracut
+depends() {
+    return 0
+}
+
+# called by dracut
+installkernel() {
+    # Include wired net drivers, excluding wireless
+    local _arch=$(uname -m)
+
+    net_module_filter() {
+        local _net_drivers='eth_type_trans|register_virtio_device|usbnet_open'
+        local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
+        local _ret
+        # subfunctions inherit following FDs
+        local _merge=8 _side2=9
+        function nmf1() {
+            local _fname _fcont
+            while read _fname; do
+                [[ $_fname =~ $_unwanted_drivers ]] && continue
+                case "$_fname" in
+                    *.ko)    _fcont="$(<        $_fname)" ;;
+                    *.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
+                    *.ko.xz) _fcont="$(xz -dc   $_fname)" ;;
+                esac
+                [[   $_fcont =~ $_net_drivers
+                && ! $_fcont =~ iw_handler_get_spy ]] \
+                && echo "$_fname"
+            done
+            return 0
+        }
+        function rotor() {
+            local _f1 _f2
+            while read _f1; do
+                echo "$_f1"
+                if read _f2; then
+                    echo "$_f2" 1>&${_side2}
+                fi
+            done | nmf1 1>&${_merge}
+            return 0
+        }
+        # Use two parallel streams to filter alternating modules.
+        set +x
+        eval "( ( rotor ) ${_side2}>&1 | nmf1 ) ${_merge}>&1"
+        [[ $debug ]] && set -x
+        return 0
+    }
+
+    { find_kernel_modules_by_path drivers/net; if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then find_kernel_modules_by_path drivers/s390/net; fi; } \
+        | net_module_filter | instmods
+
+    #instmods() will take care of hostonly
+    instmods \
+        =drivers/net/phy \
+        =drivers/net/team \
+        =drivers/net/ethernet \
+        ecb arc4 bridge stp llc ipv6 bonding 8021q af_packet virtio_net
+}
+
+# called by dracut
+install() {
+    return 0
+}
+

modules.d/90lvm/lvm_scan.sh

@@ -106,6 +106,10 @@ if [ -n "$LVS" ] ; then
     info "Scanning devices $lvmdevs for LVM logical volumes $LVS"
     lvm lvscan --ignorelockingfailure 2>&1 | vinfo
     for LV in $LVS; do
+        if [ "x$(lvm lvs --noheadings --select "lv_attr =~ k" $LV | wc -l)" = "x0" ]; then
+            info "Skipping activation of '$LV' because activationskip is set."
+            continue
+        fi
         if [ -z "$sysinit" ]; then
             lvm lvchange --yes -ay --ignorelockingfailure $nopoll --ignoremonitoring $LV 2>&1 | vinfo
         else

modules.d/90lvm/module-setup.sh

@@ -67,6 +67,20 @@ install() {
             sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 4/' ${initdir}/etc/lvm/lvm.conf
             sed -i -e 's/\(^[[:space:]]*\)use_lvmetad[[:space:]]*=[[:space:]]*[[:digit:]]/\1use_lvmetad = 0/' ${initdir}/etc/lvm/lvm.conf
         fi
+
+        export LVM_SUPPRESS_FD_WARNINGS=1
+        # Also install any files needed for LVM system id support.
+        if [ -f /etc/lvm/lvmlocal.conf ]; then
+            inst_simple -H /etc/lvm/lvmlocal.conf
+        fi
+        eval $(lvm dumpconfig global/system_id_source)
+        if [ "$system_id_source" == "file" ]; then
+            eval $(lvm dumpconfig global/system_id_file)
+            if [ -f "$system_id_file" ]; then
+                inst_simple -H $system_id_file
+            fi
+        fi
+        unset LVM_SUPPRESS_FD_WARNINGS
     fi
 
     if ! [[ -e ${initdir}/etc/lvm/lvm.conf ]]; then

modules.d/90mdraid/mdraid_start.sh

@@ -27,6 +27,7 @@ _md_force_run() {
 
         _path_d="${_path_s%/*}/degraded"
         [ ! -r "$_path_d" ] && continue
+        > $hookdir/initqueue/work
     done
 }
 

modules.d/90mdraid/module-setup.sh

@@ -46,7 +46,7 @@ cmdline() {
 
         UUID=$(
             /sbin/mdadm --examine --export $dev \
-                | while read line; do
+                | while read line || [ -n "$line" ]; do
                 [[ ${line#MD_UUID=} = $line ]] && continue
                 printf "%s" "${line#MD_UUID=} "
             done

modules.d/90mdraid/parse-md.sh

@@ -10,7 +10,7 @@ else
     if [ -n "$MD_UUID" ]; then
         for f in /etc/udev/rules.d/65-md-incremental*.rules; do
             [ -e "$f" ] || continue
-            while read line; do
+            while read line || [ -n "$line" ]; do
                 if [ "${line%%UUID CHECK}" != "$line" ]; then
                     printf 'IMPORT{program}="/sbin/mdadm --examine --export $tempnode"\n'
                     for uuid in $MD_UUID; do

modules.d/90multipath/module-setup.sh

@@ -46,7 +46,7 @@ installkernel() {
         local _merge=8 _side2=9
         function bmf1() {
             local _f
-            while read _f; do
+            while read _f || [ -n "$_f" ]; do
                 case "$_f" in
                     *.ko)    [[ $(<         $_f) =~ $_funcs ]] && echo "$_f" ;;
                     *.ko.gz) [[ $(gzip -dc <$_f) =~ $_funcs ]] && echo "$_f" ;;
@@ -58,7 +58,7 @@ installkernel() {
 
         function rotor() {
             local _f1 _f2
-            while read _f1; do
+            while read _f1 || [ -n "$_f1" ]; do
                 echo "$_f1"
                 if read _f2; then
                     echo "$_f2" 1>&${_side2}

modules.d/91crypt-loop/crypt-loop-lib.sh

@@ -19,8 +19,6 @@ loop_decrypt() {
     local key="/dev/mapper/${mntp##*/}"
 
     if [ ! -b $key ]; then
-        info "Keyfile has .img suffix, treating it as LUKS-encrypted loop keyfile container to unlock $device"
-
         local loopdev=$(losetup -f "${mntp}/${keypath}" --show)
         local opts="-d - luksOpen $loopdev ${key##*/}"
 
@@ -29,14 +27,12 @@ loop_decrypt() {
             --prompt "Password ($keypath on $keydev for $device)" \
             --tty-echo-off
 
-        [ -b $key ] || die "Tried setting it up, but keyfile block device was still not found!" 
+        [ -b $key ] || die "Failed to unlock $keypath on $keydev for $device."
 
         initqueue --onetime --finished --unique --name "crypt-loop-cleanup-10-${key##*/}" \
             $(command -v cryptsetup) "luksClose $key"
         initqueue --onetime --finished --unique --name "crypt-loop-cleanup-20-${loopdev##*/}" \
             $(command -v losetup) "-d $loopdev"
-    else
-        info "Existing keyfile found, re-using it for $device"
     fi
 
     cat $key

modules.d/91crypt-loop/module-setup.sh

@@ -14,7 +14,7 @@ depends() {
 
 # called by dracut
 installkernel() {
-    instmods loop
+    hostonly='' instmods loop
 }
 
 # called by dracut

modules.d/95debug/module-setup.sh

@@ -13,8 +13,11 @@ depends() {
 
 # called by dracut
 install() {
-    inst_multiple -o ps grep more cat rm strace free showmount \
+    inst_multiple -o cat ls ps grep more cat rm strace free showmount \
-        ping netstat rpcinfo vi scp ping6 ssh find vi \
+                  ping netstat rpcinfo vi scp ping6 ssh find vi \
-        fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
+                  tcpdump cp less hostname mkdir \
+                  fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
+
+    egrep '^tcpdump:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
 }
 

modules.d/95fcoe-uefi/module-setup.sh

@@ -2,6 +2,9 @@
 
 # called by dracut
 check() {
+    [[ $hostonly ]] || [[ $mount_needs ]] && {
+        [ -d /sys/firmware/efi ] || return 255
+    }
     require_binaries dcbtool fipvlan lldpad ip readlink || return 1
     return 0
 }

modules.d/95fcoe/parse-fcoe.sh

@@ -20,9 +20,9 @@
 
 
 # BRCM: Later, should check whether bnx2x is loaded first before loading bnx2fc so do not load bnx2fc when there are no Broadcom adapters
-[ -d /sys/module/fcoe ] || modprobe -a fcoe || die "FCoE requested but kernel/initrd does not support FCoE"
+[ -d /sys/module/fcoe ] || modprobe -b -a fcoe || die "FCoE requested but kernel/initrd does not support FCoE"
 
-modprobe bnx2fc >/dev/null 2>&1
+initqueue --onetime modprobe -b -q bnx2fc
 udevadm settle --timeout=30
 
 parse_fcoe_opts() {

modules.d/95fstab-sys/mount-sys.sh

@@ -7,7 +7,7 @@ fstab_mount() {
     local _dev _mp _fs _opts _dump _pass _rest
     test -e "$1" || return 1
     info "Mounting from $1"
-    while read _dev _mp _fs _opts _dump _pass _rest; do
+    while read _dev _mp _fs _opts _dump _pass _rest || [ -n "$_dev" ]; do
         [ -z "${_dev%%#*}" ] && continue # Skip comment lines
         ismounted $_mp && continue # Skip mounted filesystem
         if [ "$_pass" -gt 0 ] && ! strstr "$_opts" _netdev; then

modules.d/95iscsi/iscsiroot.sh

@@ -123,7 +123,7 @@ handle_netroot()
 
     if [ -z $iscsi_initiator ]; then
        if [ -f /sys/firmware/ibft/initiator/initiator-name ]; then
-           iscsi_initiator=$(while read line; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
+           iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
        fi
     fi
 

modules.d/95iscsi/module-setup.sh

@@ -166,7 +166,7 @@ installkernel() {
         local _merge=8 _side2=9
         function bmf1() {
             local _f
-            while read _f; do
+            while read _f || [ -n "$_f" ]; do
                 case "$_f" in
                     *.ko)    [[ $(<         $_f) =~ $_funcs ]] && echo "$_f" ;;
                     *.ko.gz) [[ $(gzip -dc <$_f) =~ $_funcs ]] && echo "$_f" ;;
@@ -178,7 +178,7 @@ installkernel() {
 
         function rotor() {
             local _f1 _f2
-            while read _f1; do
+            while read _f1 || [ -n "$_f1" ]; do
                 echo "$_f1"
                 if read _f2; then
                     echo "$_f2" 1>&${_side2}

modules.d/95iscsi/parse-iscsiroot.sh

@@ -60,19 +60,15 @@ fi
 # iscsi_firmware does not need argument checking
 if [ -n "$iscsi_firmware" ] ; then
     [ -z "$netroot" ] && netroot=iscsi:
-    modprobe -q iscsi_boot_sysfs 2>/dev/null
+    modprobe -b -q iscsi_boot_sysfs 2>/dev/null
-    modprobe -q iscsi_ibft
+    modprobe -b -q iscsi_ibft
     initqueue --onetime --timeout /sbin/iscsiroot dummy "$netroot" "$NEWROOT"
 fi
 
 # If it's not iscsi we don't continue
 [ "${netroot%%:*}" = "iscsi" ] || return
 
-modprobe -q qla4xxx
+initqueue --onetime modprobe --all -b -q qla4xxx cxgb3i cxgb4i bnx2i be2iscsi
-modprobe -q cxgb3i
-modprobe -q cxgb4i
-modprobe -q bnx2i
-modprobe -q be2iscsi
 
 if [ -z "$iscsi_firmware" ] ; then
     type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh
@@ -81,7 +77,7 @@ fi
 
 # ISCSI actually supported?
 if ! [ -e /sys/module/iscsi_tcp ]; then
-    modprobe -q iscsi_tcp || die "iscsiroot requested but kernel/initrd does not support iscsi"
+    modprobe -b -q iscsi_tcp || die "iscsiroot requested but kernel/initrd does not support iscsi"
 fi
 
 if [ -n "$netroot" ] && [ "$root" != "/dev/root" ] && [ "$root" != "dhcp" ]; then

modules.d/95nfs/parse-nfsroot.sh

@@ -57,7 +57,14 @@ fi
 
 case "$netroot" in
     /dev/nfs) netroot=nfs;;
-    /dev/*) unset netroot; return;;
+    /dev/*)
+        if [ -n "$oldnetroot" ]; then
+            netroot="$oldnetroot"
+        else
+            unset netroot
+        fi
+	return
+	;;
     # LEGACY: root=<server-ip>:/<path
     [0-9]*:/*|[0-9]*\.[0-9]*\.[0-9]*[!:]|/*)
         netroot=nfs:$netroot;;

modules.d/95resume/parse-resume.sh

@@ -37,6 +37,8 @@ esac
 
 if ! getarg noresume; then
     if [ -n "$resume" ]; then
+        wait_for_dev /dev/resume
+
         {
             printf "KERNEL==\"%s\", ACTION==\"add|change\", SYMLINK+=\"resume\"\n" \
                 ${resume#/dev/};
@@ -65,7 +67,7 @@ if ! getarg noresume; then
             printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m  > /sys/power/resume"'
         } >> /etc/udev/rules.d/99-resume.rules
 
-        printf '[ -e "%s" ] && { ln -s "%s" /dev/resume; rm -f -- "$job" "%s/initqueue/timeout/resume.sh"; }\n' \
+        printf '[ -e "%s" ] && { ln -s "%s" /dev/resume 2> /dev/null; rm -f -- "$job" "%s/initqueue/timeout/resume.sh"; }\n' \
             "$resume" "$resume" "$hookdir" >> $hookdir/initqueue/settled/resume.sh
 
         {

modules.d/95rootfs-block/module-setup.sh

@@ -30,11 +30,19 @@ cmdline_journal() {
 }
 
 cmdline_rootfs() {
-    local dev=/dev/block/$(find_root_block_device)
+    local _dev=/dev/block/$(find_root_block_device)
-    if [ -e $dev ]; then
+    local _fstype _flags _subvol
-        printf " root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$dev")")"
+    if [ -e $_dev ]; then
-        printf " rootflags=%s" "$(find_mp_fsopts /)"
+        printf " root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$_dev")")"
-        printf " rootfstype=%s" "$(find_mp_fstype /)"
+        _fstype="$(find_mp_fstype /)"
+        _flags="$(find_mp_fsopts /)"
+        printf " rootfstype=%s" "$_fstype"
+        if [[ $use_fstab != yes ]] && [[ $_fstype = btrfs ]]; then
+            _subvol=$(findmnt -e -v -n -o FSROOT --target /) \
+		&& _subvol=${_subvol#/}
+            _flags="$_flags,${_subvol:+subvol=$_subvol}"
+        fi
+        printf " rootflags=%s" "${_flags#,}"
     fi
 }
 

modules.d/95rootfs-block/mount-root.sh

@@ -81,7 +81,7 @@ mount_root() {
         # the root filesystem,
         # remount it with the proper options
         rootopts="defaults"
-        while read dev mp fs opts dump fsck; do
+        while read dev mp fs opts dump fsck || [ -n "$dev" ]; do
             # skip comments
             [ "${dev%%#*}" != "$dev" ] && continue
 

modules.d/95ssh-client/module-setup.sh

@@ -44,7 +44,7 @@ inst_sshenv()
     if [[ -f /etc/ssh/ssh_config ]]; then
         inst_simple /etc/ssh/ssh_config
         sed -i -e 's/\(^[[:space:]]*\)ProxyCommand/\1# ProxyCommand/' ${initdir}/etc/ssh/ssh_config
-        while read key val; do
+        while read key val || [ -n "$key" ]; do
             [[ $key != "GlobalKnownHostsFile" ]] && continue
             inst_simple "$val"
             break

modules.d/95udev-rules/module-setup.sh

@@ -7,8 +7,9 @@ install() {
     # Fixme: would be nice if we didn't have to guess, which rules to grab....
     # ultimately, /lib/initramfs/rules.d or somesuch which includes links/copies
     # of the rules we want so that we just copy those in would be best
-    inst_multiple udevadm cat uname blkid \
+    inst_multiple udevadm cat uname blkid
-        /etc/udev/udev.conf
+    inst_dir /etc/udev
+    inst_multiple -o /etc/udev/udev.conf
 
     [ -d ${initdir}/$systemdutildir ] || mkdir -p ${initdir}/$systemdutildir
     for _i in ${systemdutildir}/systemd-udevd ${udevdir}/udevd /sbin/udevd; do
@@ -25,16 +26,25 @@ install() {
         exit 1
     fi
 
-    inst_rules 50-udev-default.rules 60-persistent-storage.rules \
+    inst_rules \
-        61-persistent-storage-edd.rules 80-drivers.rules 95-udev-late.rules \
-        60-pcmcia.rules \
-        50-udev.rules 95-late.rules \
         50-firmware.rules \
+        50-udev.rules \
+        50-udev-default.rules \
+        55-scsi-sg3_id.rules \
+        58-scsi-sg3_symlink.rules \
         59-scsi-sg3_utils.rules \
-        55-scsi-sg3_id.rules 58-scsi-sg3_symlink.rules \
+        60-block.rules \
-        70-uaccess.rules 71-seat.rules 73-seat-late.rules \
+        60-pcmcia.rules \
+        60-persistent-storage.rules \
+        61-persistent-storage-edd.rules \
+        70-uaccess.rules \
+        71-seat.rules \
+        73-seat-late.rules \
         75-net-description.rules \
-        80-net-name-slot.rules 80-net-setup-link.rules \
+        80-drivers.rules 95-udev-late.rules \
+        80-net-name-slot.rules\
+        80-net-setup-link.rules \
+        95-late.rules \
         "$moddir/59-persistent-storage.rules" \
         "$moddir/61-persistent-storage.rules"
 

modules.d/95virtfs/mount-virtfs.sh

@@ -42,7 +42,7 @@ mount_root() {
         # the root filesystem,
         # remount it with the proper options
         rootopts="defaults"
-        while read dev mp fs opts rest; do
+        while read dev mp fs opts rest || [ -n "$dev" ]; do
             # skip comments
             [ "${dev%%#*}" != "$dev" ] && continue
 

modules.d/98dracut-systemd/dracut-cmdline-ask.sh

@@ -10,7 +10,7 @@ echo
 echo
 echo
 echo "Enter additional kernel command line parameter (end with ctrl-d or .)"
-while read -e -p "> " line; do
+while read -e -p "> " line || [ -n "$line" ]; do
     [[ "$line" == "." ]] && break
     [[ "$line" ]] && printf -- "%s\n" "$line" >> /etc/cmdline.d/99-cmdline-ask.conf
 done

modules.d/98dracut-systemd/dracut-initqueue.sh

@@ -60,6 +60,7 @@ while :; do
             job=$job . $job
             udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0
             [ -f $hookdir/initqueue/work ] && main_loop=0
+            [ $main_loop -eq 0 ] && break
         done
     fi