fcoe: Allow more time for the bnx2x link negotiation before brining up fcoe interfaces.

bnx2x can take no longer than 3 seconds to initialize the link in some setups
which can cause fipvlan to fail and thus the fcoe interface(s) won't be
created.

Add another 10 seconds to give the link enough time to initialize.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>

Cherry-picked from: 3966a1e1ee
Resolves: #1482185

.dir-locals.el

@@ -1,7 +1,3 @@
-;;; Directory Local Variables
-;;; For more information see (info "(emacs) Directory Variables")
-
-((sh-mode
-  (indent-tabs-mode)
-  (sh-basic-offset . 4)))
-
+((nil . ((setq sh-basic-offset: 4)
+         (setq indent-tabs-mode nil)
+         )))

.gitignore

@@ -1,23 +1,3 @@
-/Makefile.inc
-/dracut.8
-/dracut-catimages.8
-/dracut.conf.5
-/dracut.conf.d/*.conf
-/dracut-gencmdline.8
-/dracut.html
-/dracut.kernel.7
-/dracut.pc
-/dracut-install
-/modules.d/99base/switch_root
-/test/*/test.log
 test*.img
-/.buildpath
-/.project
-/dracut-version.sh
-/install/dracut-install
-/*.rpm
-/*.[0-9]
-/modules.d/98dracut-systemd/*.service.8
-/*.sign
-*.o
-skipcpio/skipcpio
+modules.d/99base/switch_root
+*~

.kateproject

@@ -1,8 +1,8 @@
 {
-  "name": "Dracut"
+  "name": "Kate"
   , "files": [ { "git": 1 } ]
   , "build": {
-    "directory": "./"
+    "directory": "build"
   , "build": "make -j $(getconf _NPROCESSORS_ONLN) all"
   , "clean": "make clean"
   }

.mailmap

@@ -1,33 +1,6 @@
-Philippe Seewer <philippe.seewer@bfh.ch> 	<philippe.seewer-omB+W0Dpw2o@public.gmane.org>
-Seewer Philippe <philippe.seewer@bfh.ch> 	<philippe.seewer@bfh.ch>
-Philippe Seewer <philippe.seewer@bfh.ch> 	<philippe.seewer@bfh.ch>
-Victor Lowther <victor.lowther@gmail.com> 	<victor.lowther-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
-Harald Hoyer <harald@redhat.com> 		<harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
-Harald Hoyer <harald@redhat.com> 		<harald@eeepc.(none)>
-Harald Hoyer <harald@redhat.com> 		<harald@hoyer.xyz>
-Mike Snitzer <snitzer@redhat.com> 		<msnitzer@redhat.com>
-Amerigo Wang <amwang@redhat.com> 		<xiyou.wangcong@gmail.com>
-Andrey Borzenkov <arvidjaar@gmail.com> 		<arvidjaar@mail.ru>
-Dan Horák <dhorak@redhat.com> 			<dan@danny.cz>
-John Reiser <jreiser@bitwagon.com> 		<jreiser@BitWagon.com>
-Luca Berra <bluca@vodka.it> 			<bluca@comedia.it>
-Dave Young <dyoung@redhat.com>	 		<dyoung@redhat.com>
-Dave Young <dyoung@redhat.com>	 		<dave@redhat.com>
-Frederick Grose <fgrose@sugarlabs.org> 		<fgrose@gmail.com>
-Frederic Crozat <fcrozat@suse.com> 		<fcrozat@mandriva.com>
-Shawn W Dunn <sfalken@opensuse.org> 		<sfalken@opensuse.org>
-Kyle McMartin <kmcmarti@redhat.com>             <kyle@redhat.com>
-Angelo "pallotron" Failla <pallotron@fb.com>     <pallotron@fb.com>
-Yu Watanabe <watanabe.yu+github@gmail.com>
-Martin Wilck <mwilck@suse.de>   <mwilck@suse.com>
-Thomas Renninger <trenn@suse.com>   <trenn@suse.de>
-Andrey Borzenkov <arvidjaar@gmail.com>
-Cristian Rodríguez <crrodriguez@opensuse.org>
-Daniel Drake <drake@endlessm.com> <dsd@laptop.org>
-Fabian Vogt <fvogt@suse.com>
-Hannes Reinecke <hare@suse.com>  <hare@suse.de>
-Julian Wolf <juwolf@suse.com>  <juwolf@suse.de>
-Lidong Zhong <lidong.zhong@suse.com> <lzhong@suse.com>
-Nikoli <nikoli@gmx.us> <nikoli@lavabit.com>
-Peter Robinson <pbrobinson@fedoraproject.org> <pbrobinson@gmail.com>
-Xunlei Pang <xlpang@redhat.com> <xpang@redhat.com>
+Philippe Seewer <philippe.seewer@bfh.ch> <philippe.seewer-omB+W0Dpw2o@public.gmane.org>
+Seewer Philippe <philippe.seewer@bfh.ch> <philippe.seewer@bfh.ch>
+Philippe Seewer <philippe.seewer@bfh.ch> <philippe.seewer@bfh.ch>
+Victor Lowther <victor.lowther@gmail.com> <victor.lowther-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+Harald Hoyer <harald@redhat.com> <harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
+Harald Hoyer <harald@redhat.com> <harald@eeepc.(none)>

.travis.yml

@@ -1,48 +0,0 @@
-language: generic
-sudo: required
-services:
-- docker
-env:
-  matrix:
-  - IMAGE=latest
-  - IMAGE=latest TESTS=01
-  - IMAGE=latest TESTS=12
-  - IMAGE=latest TESTS=20
-  - IMAGE=latest TESTS=50
-  - IMAGE=latest TESTS=30
-  - IMAGE=latest TESTS=31
-  - IMAGE=latest TESTS=60
-  - IMAGE=latest TESTS=70
-  - IMAGE=latest TESTS=99
-  - IMAGE=latest TESTS=02
-  - IMAGE=latest TESTS=03
-  - IMAGE=latest TESTS=04
-  - IMAGE=latest TESTS=10
-  - IMAGE=latest TESTS=11
-  - IMAGE=29 TESTS=13
-  - IMAGE=29 TESTS=14
-  - IMAGE=latest TESTS=15
-  - IMAGE=latest TESTS=17
-
-before_script:
-  - docker pull fedora:$IMAGE
-  - |
-    sudo modprobe kvm-intel nested=1 || :
-    sudo modprobe kvm-amd nested=1 || :
-    dmesg | tail || :
-  - git fetch --tags --unshallow
-  - |
-    git describe --abbrev=0 --tags || :
-    git describe --tags || :
-
-script:
-- docker run --privileged -it -v $(pwd)/:/dracut fedora:$IMAGE /dracut/fedora-test.sh $IMAGE-$$ "$TESTS"
-
-notifications:
-  webhooks:
-    urls:
-    - https://webhooks.gitter.im/e/effa917ca3e0ed5fd00e
-    on_success: change  # options: [always|never|change] default: always
-    on_failure: always  # options: [always|never|change] default: always
-    on_start: never     # options: [always|never|change] default: always
-

50-dracut.install

@@ -1,60 +0,0 @@
-#!/bin/bash
-
-COMMAND="$1"
-KERNEL_VERSION="$2"
-BOOT_DIR_ABS="$3"
-KERNEL_IMAGE="$4"
-
-# If KERNEL_INSTALL_MACHINE_ID is defined but empty, BOOT_DIR_ABS is a fake directory.
-# So, let's skip to create initrd.
-if ! [[ ${KERNEL_INSTALL_MACHINE_ID-x} ]]; then
-    exit 0
-fi
-
-if [[ -d "$BOOT_DIR_ABS" ]]; then
-    INITRD="initrd"
-else
-    BOOT_DIR_ABS="/boot"
-    INITRD="initramfs-${KERNEL_VERSION}.img"
-fi
-
-ret=0
-case "$COMMAND" in
-    add)
-        INITRD_IMAGE_PREGENERATED=${KERNEL_IMAGE%/*}/initrd
-        if [[ -f ${INITRD_IMAGE_PREGENERATED} ]]; then
-            # we found an initrd at the same place as the kernel
-            # use this and don't generate a new one
-            cp "$INITRD_IMAGE_PREGENERATED" "$BOOT_DIR_ABS/$INITRD" \
-                && chown root:root "$BOOT_DIR_ABS/$INITRD" \
-                && chmod 0600 "$BOOT_DIR_ABS/$INITRD" \
-                && exit 0
-        fi
-
-        if [[ -f /etc/kernel/cmdline ]]; then
-            read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
-        elif [[ -f /usr/lib/kernel/cmdline ]]; then
-            read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
-        fi
-
-        if ! [[ ${BOOT_OPTIONS[*]} ]]; then
-            read -r -d '' -a BOOT_OPTIONS < /proc/cmdline
-        fi
-
-        unset noimageifnotneeded
-
-        for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
-            if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
-                noimageifnotneeded="yes"
-                break
-            fi
-        done
-	dracut -f ${noimageifnotneeded:+--noimageifnotneeded} "$BOOT_DIR_ABS/$INITRD" "$KERNEL_VERSION"
-        ret=$?
-	;;
-    remove)
-        rm -f -- "$BOOT_DIR_ABS/$INITRD"
-        ret=$?
-	;;
-esac
-exit $ret

51-dracut-rescue-postinst.sh

@@ -1,68 +0,0 @@
-#!/bin/bash
-
-export LANG=C
-
-KERNEL_VERSION="$1"
-KERNEL_IMAGE="$2"
-
-[[ -f /etc/os-release ]] && . /etc/os-release
-
-if [[ ! -f /etc/machine-id ]] || [[ ! -s /etc/machine-id ]]; then
-    systemd-machine-id-setup
-fi
-
-[[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
-
-[[ $MACHINE_ID ]] || exit 1
-[[ -f $KERNEL_IMAGE ]] || exit 1
-
-INITRDFILE="/boot/initramfs-0-rescue-${MACHINE_ID}.img"
-NEW_KERNEL_IMAGE="${KERNEL_IMAGE%/*}/vmlinuz-0-rescue-${MACHINE_ID}"
-
-[[ -f $INITRDFILE ]] && [[ -f $NEW_KERNEL_IMAGE ]] && exit 0
-
-dropindirs_sort()
-{
-    suffix=$1; shift
-    args=("$@")
-    files=$(
-        while (( $# > 0 )); do
-            for i in ${1}/*${suffix}; do
-                [[ -f $i ]] && echo ${i##*/}
-            done
-            shift
-        done | sort -Vu
-    )
-
-    for f in $files; do
-        for d in "${args[@]}"; do
-            if [[ -f "$d/$f" ]]; then
-                echo "$d/$f"
-                continue 2
-            fi
-        done
-    done
-}
-
-# source our config dir
-for f in $(dropindirs_sort ".conf" "/etc/dracut.conf.d" "/usr/lib/dracut/dracut.conf.d"); do
-    [[ -e $f ]] && . "$f"
-done
-
-[[ $dracut_rescue_image != "yes" ]] && exit 0
-
-if [[ ! -f $INITRDFILE ]]; then
-    dracut --no-hostonly -a "rescue" "$INITRDFILE" "$KERNEL_VERSION"
-    ((ret+=$?))
-fi
-
-if [[ ! -f $NEW_KERNEL_IMAGE ]]; then
-    cp "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
-    ((ret+=$?))
-fi
-
-new-kernel-pkg --install "$KERNEL_VERSION" --kernel-image "$NEW_KERNEL_IMAGE" --initrdfile "$INITRDFILE" --banner "$NAME $VERSION_ID Rescue $MACHINE_ID"
-
-((ret+=$?))
-
-exit $ret

51-dracut-rescue.install

@@ -1,131 +0,0 @@
-#!/bin/bash
-
-export LANG=C
-
-COMMAND="$1"
-KERNEL_VERSION="$2"
-BOOT_DIR_ABS="${3%/*}/0-rescue"
-KERNEL_IMAGE="$4"
-
-
-dropindirs_sort()
-{
-    suffix=$1; shift
-    args=("$@")
-    files=$(
-        while (( $# > 0 )); do
-            for i in ${1}/*${suffix}; do
-                [[ -f $i ]] && echo ${i##*/}
-            done
-            shift
-        done | sort -Vu
-    )
-
-    for f in $files; do
-        for d in "${args[@]}"; do
-            if [[ -f "$d/$f" ]]; then
-                echo "$d/$f"
-                continue 2
-            fi
-        done
-    done
-}
-
-[[ -f /etc/os-release ]] && . /etc/os-release
-
-if [[ ${KERNEL_INSTALL_MACHINE_ID+x} ]]; then
-    MACHINE_ID=$KERNEL_INSTALL_MACHINE_ID
-elif [[ -f /etc/machine-id ]] ; then
-    read MACHINE_ID < /etc/machine-id
-fi
-
-if ! [[ $MACHINE_ID ]]; then
-    exit 0
-fi
-
-if [[ -f /etc/kernel/cmdline ]]; then
-    read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
-elif [[ -f /usr/lib/kernel/cmdline ]]; then
-    read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
-fi
-
-if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
-    read -r -d '' -a line < /proc/cmdline
-    for i in "${line[@]}"; do
-        [[ "${i#initrd=*}" != "$i" ]] && continue
-        BOOT_OPTIONS+=("$i")
-    done
-fi
-
-if ! [[ ${BOOT_OPTIONS[*]} ]]; then
-    echo "Could not determine the kernel command line parameters." >&2
-    echo "Please specify the kernel command line in /etc/kernel/cmdline!" >&2
-    exit 1
-fi
-
-if [[ -d "${BOOT_DIR_ABS%/*}" ]]; then
-    BOOT_DIR="/${MACHINE_ID}/0-rescue"
-    BOOT_ROOT=${BOOT_DIR_ABS%$BOOT_DIR}
-    LOADER_ENTRY="$BOOT_ROOT/loader/entries/${MACHINE_ID}-0-rescue.conf"
-    KERNEL="linux"
-    INITRD="initrd"
-else
-    BLS_DIR="/boot/loader/entries"
-    BOOT_DIR_ABS="/boot"
-    LOADER_ENTRY="$BLS_DIR/${MACHINE_ID}-0-rescue.conf"
-    KERNEL="vmlinuz-0-rescue-${MACHINE_ID}"
-    INITRD="initramfs-0-rescue-${MACHINE_ID}.img"
-fi
-
-ret=0
-
-case "$COMMAND" in
-    add)
-        [[ -f "$LOADER_ENTRY" ]] && [[ -f "$BOOT_DIR_ABS/$KERNEL" ]] \
-            && [[ -f "$BOOT_DIR_ABS/$INITRD" ]] && exit 0
-
-        # source our config dir
-        for f in $(dropindirs_sort ".conf" "/etc/dracut.conf.d" "/usr/lib/dracut/dracut.conf.d"); do
-            [[ -e $f ]] && . "$f"
-        done
-
-        [[ $dracut_rescue_image != "yes" ]] && exit 0
-
-        [[ -d "$BOOT_DIR_ABS" ]] || mkdir -p "$BOOT_DIR_ABS"
-
-        if ! cp "$KERNEL_IMAGE" "$BOOT_DIR_ABS/$KERNEL"; then
-            echo "Can't copy '$KERNEL_IMAGE to '$BOOT_DIR_ABS/$KERNEL'!" >&2
-        fi
-
-        if [[ ! -f "$BOOT_DIR_ABS/$INITRD" ]]; then
-            dracut -f --no-hostonly -a "rescue" "$BOOT_DIR_ABS/$INITRD" "$KERNEL_VERSION"
-            ((ret+=$?))
-        fi
-
-        if [[ "${BOOT_DIR_ABS}" != "/boot" ]]; then
-            {
-                echo "title      $PRETTY_NAME - Rescue Image"
-                echo "version    $KERNEL_VERSION"
-                echo "machine-id $MACHINE_ID"
-                echo "options    ${BOOT_OPTIONS[@]} rd.auto=1"
-                echo "linux      $BOOT_DIR/linux"
-                echo "initrd     $BOOT_DIR/initrd"
-            } > $LOADER_ENTRY
-        else
-            cp -aT "${KERNEL_IMAGE%/*}/bls.conf" $LOADER_ENTRY
-            sed -i 's/'$KERNEL_VERSION'/0-rescue-'${MACHINE_ID}'/' $LOADER_ENTRY
-        fi
-
-        ((ret+=$?))
-        ;;
-
-    remove)
-        exit 0
-        ;;
-
-    *)
-        usage
-        ret=1;;
-esac
-
-exit $ret

AUTHORS

@@ -1,228 +1,32 @@
 Harald Hoyer <harald@redhat.com>
 Victor Lowther <victor.lowther@gmail.com>
-Amadeusz Żołnowski <aidecoe@aidecoe.name>
-Hannes Reinecke <hare@suse.com>
-Will Woods <wwoods@redhat.com>
 Philippe Seewer <philippe.seewer@bfh.ch>
 Warren Togami <wtogami@redhat.com>
-Dave Young <dyoung@redhat.com>
 Jeremy Katz <katzj@redhat.com>
 David Dillow <dave@thedillows.org>
-Michal Soltys <soltys@ziu.info>
-Colin Guthrie <colin@mageia.org>
-Daniel Molkentin <dmolkentin@suse.com>
-Amerigo Wang <amwang@redhat.com>
-Thomas Renninger <trenn@suse.com>
-Lukas Nykryn <lnykryn@redhat.com>
-Alexander Tsoy <alexander@tsoy.me>
-Frederick Grose <fgrose@sugarlabs.org>
-WANG Chao <chaowang@redhat.com>
-Yu Watanabe <watanabe.yu+github@gmail.com>
-Andrey Borzenkov <arvidjaar@gmail.com>
+Andreas Thienemann <andreas@bawue.net>
 Hans de Goede <hdegoede@redhat.com>
 Peter Jones <pjones@redhat.com>
-Andreas Thienemann <andreas@bawue.net>
-Peter Robinson <pbrobinson@fedoraproject.org>
-Fabian Vogt <fvogt@suse.com>
-Kairui Song <kasong@redhat.com>
-John Reiser <jreiser@bitwagon.com>
-Luca Berra <bluca@vodka.it>
-Xunlei Pang <xlpang@redhat.com>
-Daniel Drake <drake@endlessm.com>
-Lubomir Rintel <lkundrak@v3.sk>
-Angelo "pallotron" Failla <pallotron@fb.com>
-Brian C. Lane <bcl@redhat.com>
-Ville Skyttä <ville.skytta@iki.fi>
-Cristian Rodríguez <crrodriguez@opensuse.org>
-Dan Horák <dhorak@redhat.com>
-Baoquan He <bhe@redhat.com>
-Brendan Germain <brendan.germain@nasdaqomx.com>
-Colin Walters <walters@verbum.org>
-Leho Kraav <leho@kraav.com>
-Moritz Maxeiner <moritz@ucworks.org>
-Nicolas Chauvet <kwizart@gmail.com>
-Ondrej Mosnacek <omosnace@redhat.com>
-Fabian Deutsch <fabiand@fedoraproject.org>
-Javier Martinez Canillas <javierm@redhat.com>
-Kamil Rytarowski <n54@gmx.com>
-Lidong Zhong <lidong.zhong@suse.com>
+Luca Berra <bluca@comedia.it>
 Marc Grimme <grimme@atix.de>
-NeilBrown <neilb@suse.de>
-Peter Rajnoha <prajnoha@redhat.com>
-Radek Vykydal <rvykydal@redhat.com>
-Thorsten Behrens <tbehrens@suse.com>
-Chao Wang <chaowang@redhat.com>
-Frederic Crozat <fcrozat@suse.com>
-James Lee <jlee@thestaticvoid.com>
-Jesse Keating <jkeating@redhat.com>
-Martin Wilck <mwilck@suse.de>
-Mike Gilbert <floppym@gentoo.org>
-Milan Broz <mbroz@redhat.com>
-Mimi Zohar <zohar@linux.vnet.ibm.com>
-Roberto Sassu <roberto.sassu@polito.it>
-Stefan Reimer <it@startux.de>
-Adam Williamson <awilliam@redhat.com>
-Anton Blanchard <anton@samba.org>
+Andrey Borzenkov <arvidjaar@mail.ru>
 Bill Nottingham <notting@redhat.com>
-Chapman Flack <g2@anastigmatix.net>
-Chris Leech <cleech@redhat.com>
+Daniel Drake <dsd@laptop.org>
 David Cantrell <dcantrell@redhat.com>
-Dennis Gilmore <dennis@ausil.us>
-Jan Synacek <jsynacek@redhat.com>
-Jon Ander Hernandez <jonan.h@gmail.com>
-Juan RP <xtraeme@gmail.com>
 Lance Albertson <lance@osuosl.org>
-Marcos Mello <marcosfrm@gmail.com>
-Marian Ganisin <mganisin@redhat.com>
-Matthias Gerstner <matthias.gerstner@suse.de>
 Michael Ploujnikov <plouj@somanetworks.com>
-Pratyush Anand <panand@redhat.com>
-Silvio Fricke <silvio.fricke@gmail.com>
-Steven Brudenell <steven.brudenell@gmail.com>
-Stig Telfer <stelfer@cray.com>
-Thomas Backlund <tmb@mageia.org>
-Vasiliy Tolstov <v.tolstov@selfip.ru>
-Wim Muskee <wimmuskee@gmail.com>
-tpgxyz <tpgxyz@gmail.com>
 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
-Alan Pevec <apevec@redhat.com>
-Alex Harpin <development@landsofshadow.co.uk>
-Ankit Kumar <ankit@linux.vnet.ibm.com>
-Antony Messerli <amesserl@rackspace.com>
-Chao Fan <cfan@redhat.com>
-Daniel Kahn Gillmor <dkg@fifthhorseman.net>
-Daniel Schaal <farbing@web.de>
-Denis Silakov <dsilakov@virtuozzo.com>
-Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
-Erwan Velu <erwan.velu@enovance.com>
-Evgeny Vereshchagin <evvers@ya.ru>
-Guido Trentalancia <guido@trentalancia.net>
-Hari Bathini <hbathini@linux.vnet.ibm.com>
-Ian Dall <ian@beware.dropbear.id.au>
-Imran Haider <imran1008@gmail.com>
-James Buren <ryuo@frugalware.org>
+Dan Horák <dan@danny.cz>
 Joey Boggs <jboggs@redhat.com>
-Julian Wolf <juwolf@suse.com>
-Koen Kooi <koen@dominion.thruhere.net>
-Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-Kyle McMartin <kmcmarti@redhat.com>
-Lukas Wunner <lukas@wunner.de>
-Mike Snitzer <snitzer@redhat.com>
-Minfei Huang <mhuang@redhat.com>
-Nikoli <nikoli@gmx.us>
-Pingfan Liu <piliu@redhat.com>
-Przemysław Rudy <prudy1@o2.pl>
-Robert LeBlanc <robert@leblancnet.us>
-Robert Scheck <robert@fedoraproject.org>
-Stefan Berger <stefanb@us.ibm.com>
-Thomas Lange <lange@informatik.uni-koeln.de>
-Till Maas <opensource@till.name>
-Tony Asleson <tasleson@redhat.com>
-Vivek Goyal <vgoyal@redhat.com>
-Vladislav Bogdanov <bubble@hoster-ok.com>
-Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
-Alexander Kurtz <alexander@kurtz.be>
-Alexander Todorov <atodorov@redhat.com>
-Andreas Stieger <astieger@suse.com>
-Andy Lutomirski <luto@mit.edu>
-Anssi Hannula <anssi@mageia.org>
-Artem Savkov <asavkov@redhat.com>
-B. Wilson <x@wilsonb.com>
-Brandon Philips <brandon@ifup.co>
-Bryn M. Reeves <bmr@redhat.com>
-Canek Peláez Valdés <caneko@gmail.com>
-Carlo Caione <carlo@endlessm.com>
-Chad Dupuis <chad.dupuis@cavium.com>
-Christian Heinz <christian.ch.heinz@gmail.com>
-Cong Wang <amwang@redhat.com>
-Dan Fuhry <dfuhry@datto.com>
 Dave Jones <davej@redhat.com>
-David Disseldorp <ddiss@suse.de>
-David Michael <david.michael@coreos.com>
-Dennis Schridde <devurandom@gmx.net>
-Derek Higgins <derekh@redhat.com>
-Duane Griffin <duaneg@dghda.com>
-Elan Ruusamäe <glen@delfi.ee>
-Enno Boland <g@s01.de>
-Eugene Syromiatnikov <esyr@redhat.com>
-Florian Albrechtskirchinger <falbrechtskirchinger@gmail.com>
-Florian Gamböck <mail@floga.de>
-François Cami <fcami@fedoraproject.org>
-Gerd von Egidy <gerd.von.egidy@intra2net.com>
-Glen Gray <slaine@slaine.org>
-HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
-Hendrik Brueckner <brueckner@linux.ibm.com>
-Hermann Gausterer <git-dracut-2012@mrq1.org>
-Hiroaki Mizuguchi <hiroaki-m@iij.ad.jp>
-Hui Wang <john.wanghui@huawei.com>
-Ignaz Forster <iforster@suse.com>
-James Laska <jlaska@redhat.com>
-Jan Stodola <jstodola@redhat.com>
-Jason Dana <jasondana@quarksecurity.com>
-Jeremy Linton <lintonrjeremy@gmail.com>
-Jiri Pirko <jiri@resnulli.us>
-Joe Lawrence <Joe.Lawrence@stratus.com>
-Johannes Thumshirn <jthumshirn@suse.com>
-Jonas Jonsson <jonas@websystem.se>
-Kevin Yung <Kevin.Yung@myob.com>
-Lars R. Damerow <lars@pixar.com>
-Lennert Buytenhek <buytenh@wantstofly.org>
-Major Hayden <major@mhtx.net>
-Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
-Marian Csontos <mcsontos@redhat.com>
-Mark Fasheh <mfasheh@suse.de>
-Marko Myllynen <myllynen@redhat.com>
-Matt <smoothsailing72@hotmail.com>
-Matt Smith <shadowfax@gmx.com>
-Matthew Thode <mthode@mthode.org>
-Mei Liu <liumbj@linux.vnet.ibm.com>
-Michael Chapman <mike@very.puzzling.org>
-Michael McCracken <michael.mccracken@gmail.com>
-Michal Koutný <mkoutny@suse.com>
+Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Luca Berra <bluca@vodka.it>
 Michal Schmidt <mschmidt@redhat.com>
-Michal Sekletar <msekleta@redhat.com>
-Mike Gorse <mgorse@suse.com>
-Moritz 'Morty' Strübe <morty@gmx.net>
+Mike Snitzer <msnitzer@redhat.com>
+Mike Snitzer <snitzer@redhat.com>
 Munehiro Matsuda <haro@kgt.co.jp>
-Nicolas Porcel <nicolasporcel06@gmail.com>
-Olivier Blin <dev@blino.org>
-P J P <ppandit@redhat.com>
-Paolo Bonzini <pbonzini@redhat.com>
-Pavel Zhukov <pzhukov@redhat.com>
-Pawel Wieczorkiewicz <pwieczorkiewicz@suse.de>
-Pekka Wallendahl <wyrmiyu@gmail.com>
-Prarit Bhargava <prarit@redhat.com>
-Praveen_Paladugu@Dell.com <Praveen_Paladugu@Dell.com>
-Pádraig Brady <P@draigBrady.com>
+Peter Rajnoha <prajnoha@redhat.com>
 Quentin Armitage <quentin@armitage.org.uk>
-Renaud Métrich <rmetrich@redhat.com>
-Robert Buchholz <rbu@goodpoint.de>
-Ruben Kerkhof <ruben@rubenkerkhof.com>
-Rusty Bird <rustybird@openmailbox.org>
 Sergey Fionov <fionov@gmail.com>
-Shawn W Dunn <sfalken@opensuse.org>
-Srinivasa T N <seenutn@linux.vnet.ibm.com>
-Stijn Hoop <stijn@sandcat.nl>
-Sullivan (CTR), Austin <austin.sullivan.ctr@progeny.net>
 Thilo Bangert <thilo.bangert@gmx.net>
-Thomas Blume <thomas.blume@suse.com>
-Tobias Geerinckx <tobias.geerinckx@gmail.com>
-Tobias Klauser <tklauser@distanz.ch>
-Tom Gundersen <teg@jklm.no>
-Tomasz Paweł Gajc <tpgxyz@gmail.com>
-Tomasz Torcz <tomek@pipebreaker.pl>
-Tong Li <tonli@redhat.com>
-Vadim Kuznetsov <vadimk@gentoo.org>
-Vaughan Cao <vaughan.cao@oracle.com>
-Vratislav Podzimek <vpodzime@redhat.com>
 Yanko Kaneti <yaneti@declera.com>
-Zhiguo Deng <bjzgdeng@linux.vnet.ibm.com>
-Ziyue Yang <ziyang@redhat.com>
-honza801 <honza801@gmail.com>
-jloeser <jloeser@suse.de>
-johannes <johannes.brechtmann@gmail.com>
-jonathan-teh <30538043+jonathan-teh@users.noreply.github.com>
-maximilian attems <max@stro.at>
-privb0x23 <privb0x23@users.noreply.github.com>
-tpg <tpgxyz@gmail.com>
-xtraeme <xtraeme@voidlinux.eu>

COPYING

@@ -1,12 +1,12 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
 
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                          675 Mass Ave, Cambridge, MA 02139, USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
-                            Preamble
+			    Preamble
 
   The licenses for most software are designed to take away your
 freedom to share and change it.  By contrast, the GNU General Public
@@ -15,7 +15,7 @@ software--to make sure the software is free for all its users.  This
 General Public License applies to most of the Free Software
 Foundation's software and to any other program whose authors commit to
 using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
+the GNU Library General Public License instead.)  You can apply it to
 your programs, too.
 
   When we speak of free software, we are referring to freedom, not
@@ -55,8 +55,8 @@ patent must be licensed for everyone's free use or not licensed at all.
 
   The precise terms and conditions for copying, distribution and
 modification follow.
-
-                    GNU GENERAL PUBLIC LICENSE
+
+		    GNU GENERAL PUBLIC LICENSE
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
   0. This License applies to any program or other work which contains
@@ -110,7 +110,7 @@ above, provided that you also meet all of these conditions:
     License.  (Exception: if the Program itself is interactive but
     does not normally print such an announcement, your work based on
     the Program is not required to print an announcement.)
-
+
 These requirements apply to the modified work as a whole.  If
 identifiable sections of that work are not derived from the Program,
 and can be reasonably considered independent and separate works in
@@ -168,7 +168,7 @@ access to copy from a designated place, then offering equivalent
 access to copy the source code from the same place counts as
 distribution of the source code, even though third parties are not
 compelled to copy the source along with the object code.
-
+
   4. You may not copy, modify, sublicense, or distribute the Program
 except as expressly provided under this License.  Any attempt
 otherwise to copy, modify, sublicense or distribute the Program is
@@ -225,7 +225,7 @@ impose that choice.
 
 This section is intended to make thoroughly clear what is believed to
 be a consequence of the rest of this License.
-
+
   8. If the distribution and/or use of the Program is restricted in
 certain countries either by patents or by copyrighted interfaces, the
 original copyright holder who places the Program under this License
@@ -255,7 +255,7 @@ make exceptions for this.  Our decision will be guided by the two goals
 of preserving the free status of all derivatives of our free software and
 of promoting the sharing and reuse of software generally.
 
-                            NO WARRANTY
+			    NO WARRANTY
 
   11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
 FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
@@ -277,9 +277,9 @@ YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
 PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGES.
 
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
+		     END OF TERMS AND CONDITIONS
+
+	Appendix: How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it
@@ -291,7 +291,7 @@ convey the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
     <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
+    Copyright (C) 19yy  <name of author>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -303,16 +303,16 @@ the "copyright" line and a pointer to where the full notice is found.
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
 
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 
 Also add information on how to contact you by electronic and paper mail.
 
 If the program is interactive, make it output a short notice like this
 when it starts in an interactive mode:
 
-    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision version 69, Copyright (C) 19yy name of author
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.
@@ -335,5 +335,5 @@ necessary.  Here is a sample; alter the names:
 This General Public License does not permit incorporating your program into
 proprietary programs.  If your program is a subroutine library, you may
 consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
+library.  If this is what you want to do, use the GNU Library General
 Public License instead of this License.

HACKING

@@ -1,11 +1,11 @@
 Right now, most of the testing is done using a qemu/kvm guest and
 generating the initramfs on another box but the support is all present
 to build for the "running" machine.  For the former, you can boot the guest
-using qemu's -kernel and -initrd options.
+using qemu's -kernel and -initrd options.  
 
 dracut exists and will build an image.  It is command-line equivalent
 to most mkinitrd implementations and should be pretty straight-forward
-to use.
+to use.  
 
 To use, just run dracut with an output file name and, optionally, a
 kernel version (it defaults to using the current).   The appropriate
@@ -14,7 +14,7 @@ like to customize the list of modules copied in, edit /etc/dracut.conf
 and set
   dracutmodules="foo bar baz"
 
-Note that dracut calls functional components in modules.d "modules"
+Note that dracut calls functional components in modules.d "modules" 
 while kernel modules are called "drivers".
 
 Requirements:

Makefile

@@ -1,281 +1,116 @@
--include dracut-version.sh
-
-VERSION ?= $(shell [ -d .git ] && git describe --abbrev=0 --tags --always 2>/dev/null || echo $(DRACUT_VERSION))
-GITVERSION ?= $(shell [ -d .git ] && { v=$$(git describe --tags --always 2>/dev/null); [ -n "$$v" ] && [ $${v\#*-} != $$v ] && echo -$${v\#*-}; } )
-
--include Makefile.inc
+VERSION=004
+GITVERSION=$(shell [ -d .git ] && git rev-list  --abbrev-commit  -n 1 HEAD  |cut -b 1-8)
 
 prefix ?= /usr
-libdir ?= ${prefix}/lib
 datadir ?= ${prefix}/share
-pkglibdir ?= ${libdir}/dracut
+pkglibdir ?= ${datadir}/dracut
 sysconfdir ?= ${prefix}/etc
-bindir ?= ${prefix}/bin
+sbindir ?= ${prefix}/sbin
 mandir ?= ${prefix}/share/man
-CFLAGS ?= -O2 -g -Wall
-CFLAGS += -std=gnu99 -D_FILE_OFFSET_BITS=64 -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 $(KMOD_CFLAGS)
-bashcompletiondir ?= ${datadir}/bash-completion/completions
-pkgconfigdatadir ?= $(datadir)/pkgconfig
 
-man1pages = lsinitrd.1
 
-man5pages = dracut.conf.5
+.PHONY: install clean archive rpm testimage test all check AUTHORS
 
-man7pages = dracut.cmdline.7 \
-            dracut.bootup.7 \
-            dracut.modules.7
-
-man8pages = dracut.8 \
-            dracut-catimages.8 \
-            mkinitrd.8 \
-            mkinitrd-suse.8 \
-            modules.d/98dracut-systemd/dracut-cmdline.service.8 \
-            modules.d/98dracut-systemd/dracut-initqueue.service.8 \
-            modules.d/98dracut-systemd/dracut-mount.service.8 \
-            modules.d/98dracut-systemd/dracut-shutdown.service.8 \
-            modules.d/98dracut-systemd/dracut-pre-mount.service.8 \
-            modules.d/98dracut-systemd/dracut-pre-pivot.service.8 \
-            modules.d/98dracut-systemd/dracut-pre-trigger.service.8 \
-            modules.d/98dracut-systemd/dracut-pre-udev.service.8
-
-manpages = $(man1pages) $(man5pages) $(man7pages) $(man8pages)
-
-.PHONY: install clean archive rpm srpm testimage test all check AUTHORS doc dracut-version.sh
-
-all: dracut-version.sh dracut.pc dracut-install skipcpio/skipcpio
-
-DRACUT_INSTALL_OBJECTS = \
-        install/dracut-install.o \
-        install/hashmap.o\
-        install/log.o \
-        install/strv.o \
-        install/util.o
-
-# deps generated with gcc -MM
-install/dracut-install.o: install/dracut-install.c install/log.h install/macro.h \
-	install/hashmap.h install/util.h
-install/hashmap.o: install/hashmap.c install/util.h install/macro.h install/log.h \
-	install/hashmap.h
-install/log.o: install/log.c install/log.h install/macro.h install/util.h
-install/util.o: install/util.c install/util.h install/macro.h install/log.h
-install/strv.o: install/strv.c install/strv.h install/util.h install/macro.h install/log.h
-
-install/dracut-install: $(DRACUT_INSTALL_OBJECTS)
-	$(CC) $(LDFLAGS) -o $@ $(DRACUT_INSTALL_OBJECTS) $(LDLIBS) $(KMOD_LIBS)
-
-logtee: logtee.c
-	$(CC) $(LDFLAGS) -o $@ $<
-
-dracut-install: install/dracut-install
-	ln -fs $< $@
-
-SKIPCPIO_OBJECTS= \
-	skipcpio/skipcpio.o
-
-skipcpio/skipcpio.o: skipcpio/skipcpio.c
-skipcpio/skipcpio: skipcpio/skipcpio.o
-
-indent:
-	indent -i8 -nut -br -linux -l120 install/dracut-install.c
-	indent -i8 -nut -br -linux -l120 skipcpio/skipcpio.c
-
-doc: $(manpages) dracut.html
-
-ifneq ($(enable_documentation),no)
-all: doc
+ifeq (1,${WITH_SWITCH_ROOT})
+targets = modules.d/99base/switch_root
+else
+targets = 
 endif
 
-%: %.xml
-	@rm -f -- "$@"
-	xsltproc -o "$@" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
+all: $(targets) dracut-rhel6.html
 
-%.xml: %.asc
-	@rm -f -- "$@"
-	asciidoc -d manpage -b docbook -o "$@" $<
+dracut-rhel6.html: dracut-rhel6.xml
+	xsltproc -o dracut-rhel6.html --xinclude -nonet \
+		--stringparam draft.mode yes \
+		--stringparam html.stylesheet http://docs.redhat.com/docs/en-US/Common_Content/css/default.css \
+		http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut-rhel6.xml
 
-dracut.8: dracut.usage.asc dracut.8.asc
+modules.d/99base/switch_root: switch_root.c
+	gcc -D _GNU_SOURCE -D 'PACKAGE_STRING="dracut"' -std=gnu99 -fsigned-char -g -O2 -o modules.d/99base/switch_root switch_root.c	
 
-dracut.html: dracut.asc $(manpages) dracut.css dracut.usage.asc
-	@rm -f -- dracut.xml
-	asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc
-	@rm -f -- dracut.html
-	xsltproc -o dracut.html --xinclude -nonet \
-		--stringparam custom.css.source dracut.css \
-		--stringparam generate.css.header 1 \
-		http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
-	@rm -f -- dracut.xml
-
-dracut.pc: Makefile.inc Makefile
-	@echo "Name: dracut" > dracut.pc
-	@echo "Description: dracut" >> dracut.pc
-	@echo "Version: $(VERSION)$(GITVERSION)" >> dracut.pc
-	@echo "dracutdir=$(pkglibdir)" >> dracut.pc
-	@echo "dracutmodulesdir=$(pkglibdir)/modules.d" >> dracut.pc
-	@echo "dracutconfdir=$(pkglibdir)/dracut.conf.d" >> dracut.pc
-
-install: all
+install:
 	mkdir -p $(DESTDIR)$(pkglibdir)
-	mkdir -p $(DESTDIR)$(bindir)
+	mkdir -p $(DESTDIR)$(sbindir)
 	mkdir -p $(DESTDIR)$(sysconfdir)
 	mkdir -p $(DESTDIR)$(pkglibdir)/modules.d
-	mkdir -p $(DESTDIR)$(mandir)/man1 $(DESTDIR)$(mandir)/man5 $(DESTDIR)$(mandir)/man7 $(DESTDIR)$(mandir)/man8
-	install -m 0755 dracut.sh $(DESTDIR)$(bindir)/dracut
-	install -m 0755 dracut-catimages.sh $(DESTDIR)$(bindir)/dracut-catimages
-	install -m 0755 mkinitrd-dracut.sh $(DESTDIR)$(bindir)/mkinitrd
-	install -m 0755 lsinitrd.sh $(DESTDIR)$(bindir)/lsinitrd
+	mkdir -p $(DESTDIR)$(mandir)/man{1,5,8}
+	install -m 0755 dracut $(DESTDIR)$(sbindir)/dracut
+	install -m 0755 dracut-gencmdline $(DESTDIR)$(sbindir)/dracut-gencmdline
+	install -m 0755 dracut-catimages $(DESTDIR)$(sbindir)/dracut-catimages
+	install -m 0755 mkinitrd-dracut.sh $(DESTDIR)$(sbindir)/mkinitrd
+	install -m 0755 lsinitrd $(DESTDIR)$(sbindir)/lsinitrd
+ifeq (1,${WITH_SWITCH_ROOT})
+	install -m 0755 modules.d/99base/switch_root $(DESTDIR)$(sbindir)/switch_root
+endif
 	install -m 0644 dracut.conf $(DESTDIR)$(sysconfdir)/dracut.conf
 	mkdir -p $(DESTDIR)$(sysconfdir)/dracut.conf.d
-	mkdir -p $(DESTDIR)$(pkglibdir)/dracut.conf.d
-	install -m 0755 dracut-init.sh $(DESTDIR)$(pkglibdir)/dracut-init.sh
-	install -m 0755 dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions.sh
-	install -m 0755 dracut-version.sh $(DESTDIR)$(pkglibdir)/dracut-version.sh
-	ln -fs dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions
-	install -m 0755 dracut-logger.sh $(DESTDIR)$(pkglibdir)/dracut-logger.sh
-	install -m 0755 dracut-initramfs-restore.sh $(DESTDIR)$(pkglibdir)/dracut-initramfs-restore
+	install -m 0755 dracut-functions $(DESTDIR)$(pkglibdir)/dracut-functions
 	cp -arx modules.d $(DESTDIR)$(pkglibdir)
-ifneq ($(enable_documentation),no)
-	for i in $(man1pages); do install -m 0644 $$i $(DESTDIR)$(mandir)/man1/$${i##*/}; done
-	for i in $(man5pages); do install -m 0644 $$i $(DESTDIR)$(mandir)/man5/$${i##*/}; done
-	for i in $(man7pages); do install -m 0644 $$i $(DESTDIR)$(mandir)/man7/$${i##*/}; done
-	for i in $(man8pages); do install -m 0644 $$i $(DESTDIR)$(mandir)/man8/$${i##*/}; done
-	ln -fs dracut.cmdline.7 $(DESTDIR)$(mandir)/man7/dracut.kernel.7
+	install -m 0644 dracut.8 $(DESTDIR)$(mandir)/man8
+	install -m 0644 mkinitrd.8 $(DESTDIR)$(mandir)/man8
+	install -m 0644 lsinitrd.1 $(DESTDIR)$(mandir)/man1
+	install -m 0644 dracut-catimages.8 $(DESTDIR)$(mandir)/man8
+	install -m 0644 dracut-gencmdline.8 $(DESTDIR)$(mandir)/man8
+	install -m 0644 dracut.conf.5 $(DESTDIR)$(mandir)/man5
+ifeq (1,${WITH_SWITCH_ROOT})
+	rm $(DESTDIR)$(pkglibdir)/modules.d/99base/switch_root
 endif
-	if [ -n "$(systemdsystemunitdir)" ]; then \
-		mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
-		ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
-		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants; \
-		ln -s ../dracut-shutdown.service \
-		$(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants/dracut-shutdown.service; \
-		mkdir -p $(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants; \
-		for i in \
-		    dracut-cmdline.service \
-		    dracut-initqueue.service \
-		    dracut-mount.service \
-		    dracut-pre-mount.service \
-		    dracut-pre-pivot.service \
-		    dracut-pre-trigger.service \
-		    dracut-pre-udev.service \
-		    ; do \
-			ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
-			ln -s ../$$i \
-			$(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants/$$i; \
-		done \
-	fi
-	if [ -f install/dracut-install ]; then \
-		install -m 0755 install/dracut-install $(DESTDIR)$(pkglibdir)/dracut-install; \
-	fi
-	if [ -f skipcpio/skipcpio ]; then \
-		install -m 0755 skipcpio/skipcpio $(DESTDIR)$(pkglibdir)/skipcpio; \
-	fi
-	mkdir -p $(DESTDIR)${prefix}/lib/kernel/install.d
-	install -m 0755 50-dracut.install $(DESTDIR)${prefix}/lib/kernel/install.d/50-dracut.install
-	install -m 0755 51-dracut-rescue.install $(DESTDIR)${prefix}/lib/kernel/install.d/51-dracut-rescue.install
-	mkdir -p $(DESTDIR)${bashcompletiondir}
-	install -m 0644 dracut-bash-completion.sh $(DESTDIR)${bashcompletiondir}/dracut
-	install -m 0644 lsinitrd-bash-completion.sh $(DESTDIR)${bashcompletiondir}/lsinitrd
-	mkdir -p $(DESTDIR)${pkgconfigdatadir}
-	install -m 0644 dracut.pc $(DESTDIR)${pkgconfigdatadir}/dracut.pc
-
-dracut-version.sh:
-	@rm -f dracut-version.sh
-	@echo "DRACUT_VERSION=$(VERSION)$(GITVERSION)" > dracut-version.sh
 
 clean:
-	$(RM) *~
-	$(RM) */*~
-	$(RM) */*/*~
-	$(RM) $(manpages:%=%.xml) dracut.xml
-	$(RM) test-*.img
-	$(RM) dracut-*.rpm dracut-*.tar.bz2 dracut-*.tar.xz
-	$(RM) dracut-version.sh
-	$(RM) dracut-install install/dracut-install $(DRACUT_INSTALL_OBJECTS)
-	$(RM) skipcpio/skipcpio $(SKIPCPIO_OBJECTS)
-	$(RM) $(manpages) dracut.html
-	$(MAKE) -C test clean
+	rm -f *~
+	rm -f modules.d/99base/switch_root
+	rm -f test-*.img
+	rm -f dracut-*.rpm dracut-*.tar.bz2
+	make -C test clean
 
-dist: dracut-$(VERSION).tar.xz
+archive: dracut-$(VERSION)-$(GITVERSION).tar.bz2
 
-dracut-$(VERSION).tar.xz: doc syncheck
-	@echo "DRACUT_VERSION=$(VERSION)" > dracut-version.sh
-	git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ > dracut-$(VERSION).tar
-	mkdir -p dracut-$(VERSION)
-	for i in $(manpages) dracut.html dracut-version.sh; do [ "$${i%/*}" != "$$i" ] && mkdir -p "dracut-$(VERSION)/$${i%/*}"; cp "$$i" "dracut-$(VERSION)/$$i"; done
-	tar --owner=root --group=root -rf dracut-$(VERSION).tar $$(find dracut-$(VERSION) -type f)
-	rm -fr -- dracut-$(VERSION).tar.xz dracut-$(VERSION)
-	xz -9 dracut-$(VERSION).tar
-	rm -f -- dracut-$(VERSION).tar
+dist: dracut-$(VERSION).tar.bz2
 
-rpm: dracut-$(VERSION).tar.xz syncheck
+dracut-$(VERSION).tar.bz2:
+	git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ |bzip2 > dracut-$(VERSION).tar.bz2
+
+dracut-$(VERSION).tar.gz:
+	git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ |gzip > dracut-$(VERSION).tar.gz
+
+dracut-$(VERSION)-$(GITVERSION).tar.bz2:
+	git archive --format=tar HEAD --prefix=dracut-$(VERSION)-$(GITVERSION)/ |bzip2 > dracut-$(VERSION)-$(GITVERSION).tar.bz2
+
+
+rpm: dracut-$(VERSION).tar.bz2
 	rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
-	cp dracut-$(VERSION).tar.xz "$$rpmbuild"; \
-	LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
-	(cd "$$rpmbuild"; \
-	wget https://www.gnu.org/licenses/lgpl-2.1.txt; \
-	rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
+	cp dracut-$(VERSION).tar.bz2 "$$rpmbuild"; \
+	$$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
+	(cd "$$rpmbuild"; rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
 	        --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
 		--define "_rpmdir $$PWD" -ba dracut.spec; ) && \
-	( mv "$$rpmbuild"/{,$$(arch)/}*.rpm $(DESTDIR).; rm -fr -- "$$rpmbuild"; ls $(DESTDIR)*.rpm )
-
-srpm: dracut-$(VERSION).tar.xz syncheck
-	rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
-	cp dracut-$(VERSION).tar.xz "$$rpmbuild"; \
-	LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
-	(cd "$$rpmbuild"; \
-	[ -f $$src/lgpl-2.1.txt ] && cp $$src/lgpl-2.1.txt . || wget https://www.gnu.org/licenses/lgpl-2.1.txt; \
-	rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
-	        --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
-		--define "_rpmdir $$PWD" -bs dracut.spec; ) && \
-	( mv "$$rpmbuild"/*.src.rpm $(DESTDIR).; rm -fr -- "$$rpmbuild"; ls $(DESTDIR)*.rpm )
+	( mv "$$rpmbuild"/noarch/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr "$$rpmbuild"; ls *.rpm )
 
 syncheck:
-	@ret=0;for i in dracut-initramfs-restore.sh modules.d/*/*.sh; do \
-                [ "$${i##*/}" = "module-setup.sh" ] && continue; \
-                read line < "$$i"; [ "$${line#*bash*}" != "$$line" ] && continue; \
-		[ $$V ] && echo "posix syntax check: $$i"; bash --posix -n "$$i" ; ret=$$(($$ret+$$?)); \
-		[ $$V ] && echo "checking for [[: $$i"; if grep -Fq '[[ ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains [["; fi; \
-		[ $$V ] && echo "checking for echo -n: $$i"; if grep -Fq 'echo -n ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains echo -n"; fi \
+	@ret=0;for i in modules.d/99base/init modules.d/*/*.sh; do \
+                [ "$${i##*/}" = "caps.sh" ] && continue; \
+		dash -n "$$i" ; ret=$$(($$ret+$$?)); \
 	done;exit $$ret
-	@ret=0;for i in *.sh mkinitrd-dracut.sh modules.d/*/*.sh \
-	                modules.d/*/module-setup.sh; do \
-		[ $$V ] && echo "bash syntax check: $$i"; bash -n "$$i" ; ret=$$(($$ret+$$?)); \
+	@ret=0;for i in dracut modules.d/02caps/caps.sh modules.d/*/install modules.d/*/installkernel modules.d/*/check; do \
+		bash -n "$$i" ; ret=$$(($$ret+$$?)); \
 	done;exit $$ret
 
-check: all syncheck rpm
-	@[ "$$EUID" == "0" ] || { echo "'check' must be run as root! Please use 'sudo'."; exit 1; }
-	@$(MAKE) -C test check
+check: all syncheck
+	$(MAKE) -C test check
 
 testimage: all
-	./dracut.sh -N -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
-	@echo wrote  test-$(shell uname -r).img
-
-debugtestimage: all
-	./dracut.sh --debug -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
-	@echo wrote  test-$(shell uname -r).img
+	./dracut -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	@echo wrote  test-$(shell uname -r).img 
 
 testimages: all
-	./dracut.sh -l -a debug --kernel-only -f test-kernel-$(shell uname -r).img $(shell uname -r)
-	@echo wrote  test-$(shell uname -r).img
-	./dracut.sh -l -a debug --no-kernel -f test-dracut.img $(shell uname -r)
-	@echo wrote  test-dracut.img
-
-debughostimage: all
-	./dracut.sh --debug -H -l -f test-$(shell uname -r).img $(shell uname -r)
-	@echo wrote  test-$(shell uname -r).img
+	./dracut -l -a debug --kernel-only -f test-kernel-$(shell uname -r).img $(shell uname -r)
+	@echo wrote  test-$(shell uname -r).img 
+	./dracut -l -a debug --no-kernel -f test-dracut.img $(shell uname -r)
+	@echo wrote  test-dracut.img 
 
 hostimage: all
-	./dracut.sh -H -l -f test-$(shell uname -r).img $(shell uname -r)
-	@echo wrote  test-$(shell uname -r).img
-
-efi: all
-	./dracut.sh --uefi -H -l -f linux-$(shell uname -r).efi $(shell uname -r)
-	@echo wrote linux-$(shell uname -r).efi
+	./dracut -H -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+	@echo wrote  test-$(shell uname -r).img 
 
 AUTHORS:
-	git shortlog  --numbered --summary -e |while read a rest || [ -n "$$rest" ]; do echo $$rest;done > AUTHORS
-
-dracut.html.sign: dracut-$(VERSION).tar.xz dracut.html
-	gpg-sign-all dracut-$(VERSION).tar.xz dracut.html
-
-upload: dracut.html.sign
-	kup put dracut-$(VERSION).tar.xz dracut-$(VERSION).tar.sign /pub/linux/utils/boot/dracut/
-	kup put dracut.html dracut.html.sign /pub/linux/utils/boot/dracut/
+	git shortlog  --numbered --summary -e |while read a rest; do echo $$rest;done > AUTHORS

PKGBUILD

@@ -1,38 +0,0 @@
-pkgname=dracut-git
-pkgver=1
-pkgrel=1
-pkgdesc="Initramfs generation utility"
-arch=('i686' 'x86_64')
-url="https://dracut.wiki.kernel.org/"
-license=('GPL')
-conflicts=('dracut' 'mkinitcpio')
-provides=('dracut=9999' 'mkinitcpio=9999')
-depends=('bash')
-optdepends=('cryptsetup' 'lvm2')
-makedepends=('libxslt')
-backup=(etc/dracut.conf)
-source=()
-md5sums=()
-
-# out of tree builds disallowed for this PKGFILE
-BUILDDIR="${PWD}"
-PKGDEST="${PWD}"
-SRCDEST=""
-SRCPKGDEST=""
-LOGDEST=""
-
-pkgver() {
-  cd ..
-  desc="$(git describe)"
-  printf "%s.%s.%s" ${desc//-/ }
-}
-
-build() {
-  cd ..
-  make sysconfdir=/etc || return 1
-}
-
-package() {
-  cd ..
-  make DESTDIR="${pkgdir}" sysconfdir=/etc install || return 1
-}

README

@@ -1,10 +1,9 @@
-dracut
+Dracut
 ------
-dracut is an event driven initramfs infrastructure.
+Dracut is a new initramfs infrastructure.
 
-dracut (the tool) is used to create an initramfs image by copying tools
-and files from an installed system and combining it with the
-dracut framework, usually found in /usr/lib/dracut/modules.d.
+Information about the initial goals and aims can be found at 
+https://fedoraproject.org/wiki/Initrdrewrite 
 
 Unlike existing initramfs's, this is an attempt at having as little as
 possible hard-coded into the initramfs as possible.  The initramfs has
@@ -20,19 +19,19 @@ we'll grow some hooks for running arbitrary commands in the flow of
 the script, but it's worth trying to resist the urge as much as we can
 as hooks are guaranteed to be the path to slow-down.
 
-Most of the initramfs generation functionality in dracut is provided by a bunch
+Most of the initrd generation functionality in dracut is provided by a bunch
 of generator modules that are sourced by the main dracut script to install
-specific functionality into the initramfs.  They live in the modules.d
-subdirectory, and use functionality provided by dracut-functions to do their
+specific functionality into the initrd.  They live in the modules.d 
+subdirectory, and use functionality provided by dracut-functions to do their 
 work.
 
 Some general rules for writing modules:
  * Use one of the inst family of functions to actually install files
-   on to the initramfs.  They handle mangling the pathnames and (for binaries,
+   on to the initrd.  They handle mangling the pathnames and (for binaries,
    scripts, and kernel modules) installing dependencies as appropriate so
    you do not have to.
- * Scripts that end up on the initramfs should be POSIX compliant. dracut
-   will try to use /bin/dash as /bin/sh for the initramfs if it is available,
+ * Scripts that end up on the initrd should be POSIX compliant. dracut
+   will try to use /bin/dash as /bin/sh for the initrd if it is available,
    so you should install it on your system -- dash aims for strict POSIX
    compliance to the extent possible.
  * Hooks MUST be POSIX compliant -- they are sourced by the init script,
@@ -45,42 +44,35 @@ Some general rules for writing modules:
  * We have some breakpoints for debugging your hooks.  If you pass 'rdbreak'
    as a kernel parameter, the initramfs will drop to a shell just before
    switching to a new root. You can pass 'rdbreak=hookpoint', and the initramfs
-   will break just before hooks in that hookpoint run.
+   will break just before hooks in that hookpoint run. 
 
 Also, there is an attempt to keep things as distribution-agnostic as
 possible.  Every distribution has their own tool here and it's not
 something which is really interesting to have separate across them.
 So contributions to help decrease the distro-dependencies are welcome.
 
-Currently dracut lives on github.com and kernel.org.
+Currently dracut lives on sourceforge.
 
-The tarballs can be found here:
-	http://www.kernel.org/pub/linux/utils/boot/dracut/
-	ftp://ftp.kernel.org/pub/linux/utils/boot/dracut/
+Project Page:
+https://sourceforge.net/projects/dracut/
 
-Git:
-	git://git.kernel.org/pub/scm/boot/dracut/dracut.git
-	http://git.kernel.org/pub/scm/boot/dracut/dracut.git
-	https://git.kernel.org/pub/scm/boot/dracut/dracut.git
+Drop Harald Hoyer <harald@redhat.com> a mail, if you want to help with 
+the documentation, git access, etc.
 
-	git@github.com:dracutdevs/dracut.git
+Git Repository:
+http://dracut.git.sourceforge.net/
+git://dracut.git.sourceforge.net/gitroot/dracut/dracut
 
-Git Web:
-	https://github.com/dracutdevs/dracut.git
+Trac Instance:
+http://apps.sourceforge.net/trac/dracut/ 
 
-        http://git.kernel.org/?p=boot/dracut/dracut.git
-
-Project Documentation:
-	http://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html
-
-Project Wiki:
-	http://dracut.wiki.kernel.org
-
-See the TODO file for things which still need to be done and HACKING for
-some instructions on how to get started.  There is also a mailing list
-that is being used for the discussion -- initramfs@vger.kernel.org.
-It is a typical vger list, send mail to majordomo@vger.kernel.org with body
-of 'subscribe initramfs email@host.com'
+The git tree can be found at
+git://dracut.git.sourceforge.net/gitroot/dracut/dracut for now.  See the TODO
+file for things which still need to be done and HACKING for some
+instructions on how to get started.  There is also a mailing list that
+is being used for the discussion -- initramfs@vger.kernel.org.  It is
+a typical vger list, send mail to majordomo@vger.kernel.org with body
+of 'subscribe initramfs email@host.com' 
 
 
 Licensed under the GPLv2

README.generic

@@ -1,7 +1,7 @@
 To build a generic initramfs, you have to install the following software packages:
  * device-mapper
  * cryptsetup-luks
- * rpcbind nfs-utils
+ * rpcbind nfs-utils 
  * lvm2
  * iscsi-initiator-utils
  * nbd

README.kernel

@@ -1,3 +1,6 @@
-"dracut --kernel-only" is to build an initrd with only kernel modules and firmware files.
-"dracut --kernel-only" only executes "installkernel" in the modules subdirectories.
+dracut-kernel is used to pull in all firmware files to build an initrd with 
+only kernel modules and firmware files.
+
+dracut --kernel-only only executes "installkernel" in the modules 
+subdirectories.
 

README.md

@@ -1,31 +0,0 @@
-# dracut - master branch
-
-dracut is an initramfs infrastructure.
-
-## Travis
-
-[![Build Status](https://travis-ci.org/dracutdevs/dracut.svg?branch=master)](https://travis-ci.org/dracutdevs/dracut)
-
-## CentOS CI
-
-[![Build Status](https://ci.centos.org/job/dracut-push-master/badge/icon)](https://ci.centos.org/job/dracut-push-master/)
-
-- Test 01: [![Test 01](https://ci.centos.org/job/dracut-matrix-master/TESTS=01,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=01,label=dracut-ci-slave01/)
-- Test 02: [![Test 02](https://ci.centos.org/job/dracut-matrix-master/TESTS=02,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=02,label=dracut-ci-slave01/)
-- Test 03: [![Test 03](https://ci.centos.org/job/dracut-matrix-master/TESTS=03,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=03,label=dracut-ci-slave01/)
-- Test 04: [![Test 04](https://ci.centos.org/job/dracut-matrix-master/TESTS=04,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=04,label=dracut-ci-slave01/)
-- Test 10: [![Test 10](https://ci.centos.org/job/dracut-matrix-master/TESTS=10,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=10,label=dracut-ci-slave01/)
-- Test 11: [![Test 11](https://ci.centos.org/job/dracut-matrix-master/TESTS=11,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=11,label=dracut-ci-slave01/)
-- Test 12: [![Test 12](https://ci.centos.org/job/dracut-matrix-master/TESTS=12,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=12,label=dracut-ci-slave01/)
-- Test 13: [![Test 13](https://ci.centos.org/job/dracut-matrix-master/TESTS=13,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=13,label=dracut-ci-slave01/)
-- Test 14: [![Test 14](https://ci.centos.org/job/dracut-matrix-master/TESTS=14,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=14,label=dracut-ci-slave01/)
-- Test 15: [![Test 15](https://ci.centos.org/job/dracut-matrix-master/TESTS=15,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=15,label=dracut-ci-slave01/)
-- Test 16: [![Test 16](https://ci.centos.org/job/dracut-matrix-master/TESTS=16,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=16,label=dracut-ci-slave01/)
-- Test 17: [![Test 17](https://ci.centos.org/job/dracut-matrix-master/TESTS=17,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=17,label=dracut-ci-slave01/)
-- Test 20: [![Test 20](https://ci.centos.org/job/dracut-matrix-master/TESTS=20,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=20,label=dracut-ci-slave01/)
-- Test 30: [![Test 30](https://ci.centos.org/job/dracut-matrix-master/TESTS=30,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=30,label=dracut-ci-slave01/)
-- Test 31: [![Test 31](https://ci.centos.org/job/dracut-matrix-master/TESTS=31,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=31,label=dracut-ci-slave01/)
-- Test 40: [![Test 40](https://ci.centos.org/job/dracut-matrix-master/TESTS=40,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=40,label=dracut-ci-slave01/)
-- Test 50: [![Test 50](https://ci.centos.org/job/dracut-matrix-master/TESTS=50,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=50,label=dracut-ci-slave01/)
-- Test 60: [![Test 60](https://ci.centos.org/job/dracut-matrix-master/TESTS=60,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=60,label=dracut-ci-slave01/)
-- Test 70: [![Test 70](https://ci.centos.org/job/dracut-matrix-master/TESTS=70,label=dracut-ci-slave01/badge/icon)](https://ci.centos.org/job/dracut-matrix-master/TESTS=70,label=dracut-ci-slave01/)

README.modules

@@ -1,10 +1,10 @@
 Most of the functionality that dracut implements are actually implemented
-by dracut modules.  dracut modules live in modules.d, and have the following
+by dracut modules.  Dracut modules live in modules.d, and have the following
 structure:
 
 dracut_install_dir/modules.d/
 	00modname/
-		module-setup.sh
+		install
 		check
 		<other files as needed by the hook>
 
@@ -12,55 +12,45 @@ dracut_install_dir/modules.d/
 	   The numeric code must be present and in the range of 00 - 99.
 	   Modules with lower numbers are installed first.  This is important
 	   because the dracut install functions (which install files onto
-	   the initrd) refuse to overwrite already installed files. This makes
-	   it easy for an earlier module to override the functionality of a
+	   the initrd) refuse to overwrite already installed files. This makes 
+	   it easy for an earlier module to override the functionality of a 
 	   later module, so that you can have a distro or system specific
 	   module override or modify the functionality of a generic module
 	   without having to patch the more generic module.
 
-module-setup.sh:
-	 dracut sources this script to install the functionality that a
+install: dracut sources this script to install the functionality that a 
 	 module implements onto the initrd.  For the most part, this amounts
 	 to copying files from the host system onto the initrd in a controlled
-	 manner.
-
-install():
-	 This function of module-setup.sh is called to install all
-	 non-kernel files. dracut supplies several install functions that are
+	 manner.  dracut supplies several install functions that are
 	 specialized for different file types.  Browse through dracut-functions
 	 fore more details.  dracut also provides a $moddir variable if you
 	 need to install a file from the module directory, such as an initrd
 	 hook, a udev rule, or a specialized executable.
 
-installkernel():
-	 This function of module-setup.sh is called to install all
-	 kernel related files.
-
-
-check():
-       dracut calls this function to check and see if a module can be installed
+check: Dracut calls this program to check and see if a module can be installed
        on the initrd.
-
+       
        When called without options, check should check to make sure that
        any files it needs to install into the initrd from the host system
        are present.  It should exit with a 0 if they are, and a 1 if they are
        not.
 
-       When called with $hostonly set, it should perform the same check
-       that it would without it set, and it should also check to see if the
+       When called with -h, it should perform the same check that it would
+       without any options, and it should also check to see if the 
        functionality the module implements is being used on the host system.
        For example, if this module handles installing support for LUKS
        encrypted volumes, it should return 0 if all the tools to handle
        encrpted volumes are available and the host system has the root
        partition on an encrypted volume, 1 otherwise.
 
-depends():
-       This function should output a list of dracut modules
+       When called with -d, it should output a list of dracut modules
        that it relies upon.  An example would be the nfs and iscsi modules,
        which rely on the network module to detect and configure network
        interfaces.
 
-Any other files in the module will not be touched by dracut directly.
+       Check may take additional options in the future.  
+
+Any other files in the module will not be touched by dracut directly. 
 
 You are encouraged to provide a README that describes what the module is for.
 
@@ -70,42 +60,39 @@ HOOKS
 
 init has the following hook points to inject scripts:
 
-/lib/dracut/hooks/cmdline/*.sh
+/cmdline/*.sh
    scripts for command line parsing
 
-/lib/dracut/hooks/pre-udev/*.sh
+/pre-udev/*.sh
    scripts to run before udev is started
 
-/lib/dracut/hooks/pre-trigger/*.sh
+/pre-trigger/*.sh
    scripts to run before the main udev trigger is pulled
 
-/lib/dracut/hooks/initqueue/*.sh
+/initqueue/*.sh
    runs in parallel to the udev trigger
    Udev events can add scripts here with /sbin/initqueue.
    If /sbin/initqueue is called with the "--onetime" option, the script
    will be removed after it was run.
-   If /lib/dracut/hooks/initqueue/work is created and udev >= 143 then
-   this loop can process the jobs in parallel to the udevtrigger.
+   If /initqueue/work is created and udev >= 143 then this loop can
+   process the jobs in parallel to the udevtrigger.
    If the udev queue is empty and no root device is found or no root
    filesystem was mounted, the user will be dropped to a shell after
    a timeout.
    Scripts can remove themselves from the initqueue by "rm $job".
 
-/lib/dracut/hooks/pre-mount/*.sh
+/pre-mount/*.sh
    scripts to run before the root filesystem is mounted
-   Network filesystems like NFS that do not use device files are an
+   Network filesystems like NFS that do not use device files are an 
    exception. Root can be mounted already at this point.
 
-/lib/dracut/hooks/mount/*.sh
+/mount/*.sh
    scripts to mount the root filesystem
    If the udev queue is empty and no root device is found or no root
    filesystem was mounted, the user will be dropped to a shell after
    a timeout.
 
-/lib/dracut/hooks/pre-pivot/*.sh
-   scripts to run before latter initramfs cleanups
-
-/lib/dracut/hooks/cleanup/*.sh
+/pre-pivot/*.sh
    scripts to run before the real init is executed and the initramfs
    disappears
    All processes started before should be killed here.

README.testsuite

@@ -1,45 +0,0 @@
-For the testsuite to work, you will have to install at least the following software packages:
-dash \
-asciidoc \
-mdadm \
-lvm2 \
-dmraid \
-cryptsetup \
-nfs-utils \
-nbd \
-dhcp-server \
-scsi-target-utils \
-iscsi-initiator-utils \
-strace \
-syslinux \
-python-imgcreate \
-genisoimage \
-btrfs-progs \
-kmod-devel \
-gcc \
-bzip2 \
-xz \
-tar \
-wget \
-rpm-build \
-${NULL}
-
-TEST-04-FULL-SYSTEMD: systemd >= 187
-
-How to run the testsuite:
-
-$ sudo make clean check
-
-in verbose mode:
-$ sudo make V=1 clean check
-
-only specific test:
-$ sudo make TESTS="01 20 40" clean check
-only runs the 01, 20 and 40 tests.
-
-debug a specific test case:
-$ cd TEST-01-BASIC
-$ sudo make clean setup run
-... change some kernel parameters ...
-$ sudo make run
-to run the test without doing the setup

TODO

@@ -1,51 +1,2 @@
-Current TODO list, broken into things which are relevant for the
-initramfs itself (/init et al) vs the generator.
-A lot of things are/should be marked with "FIXME" in the code.
+See https://sourceforge.net/apps/trac/dracut/wiki/TODO
 
-Items are ordered in priority.
-
-INITRAMFS TODO
-
-- search domain string
-- allow dual stack configuration (IPv4, IPv6) for the same interface
-- "bind-mount" kernel drivers in real root for the rescue image,
-  if the real root does not have any kernel modules for this kernel
-  https://bugzilla.redhat.com/show_bug.cgi?id=1046510
-- use info and warn prefix
-- generate systemd unit dracut-initramfs-restore in /run/systemd dynamically
-- put "root=" parsing hooks in separate hook dir
-- call "root=" parsing hooks after getting new rootpath from dhcp
-- put mount hook in main initqueue loop / careful about resume!
-- the hard-coded list of udev rules that we care about is kind of lame.
-- panic fallback
-- progress indication for fsck https://bugzilla.redhat.com/show_bug.cgi?id=827118
-- domain, searchdomain https://bugzilla.redhat.com/show_bug.cgi?id=840778
-- probably fix "--include" https://bugzilla.redhat.com/show_bug.cgi?id=849338
-
-GENERATOR TODO
-
-- report errors on missing files in check()
-- remove wait for swap devs, if no "resume=" is given on the kernel command line
-- remove wait for swap devs, if the "resume" dracut module is not included (omitted)
-- add presets (predefined set of modules)
-- add interpreter/plugin-scripts to be sourced at the beginning or end (can use dracut-functions)
-- add mechanism for module specific command line options
-- pkg-config integration, to make it easy for other packages to use us.
-- default module specification could use some work
-- udev rule copying, as mentioned above, is a bit too hard-coded
-
-- dracut-install parse LD_SHOW_AUXV="" AT_PLATFORM for lib install
-
-CODE TODO
-
-- document more functions
-- make function vars local, and prefix with "_"
-
-Future Enhancement Requests
-
-- run ssh server to enter crypto password or perform debugging (supported by debian)
-- https://bugzilla.redhat.com/show_bug.cgi?id=524727 - dracut + encrypted root + networking
-
-- lsinitrd --print-cmdline
-- dracut --print-cmdline error if additional arguments
-- library for cmdline

configure

@@ -1,85 +0,0 @@
-#!/bin/bash
-
-# We don't support srcdir != builddir
-echo \#buildapi-variable-no-builddir >/dev/null
-
-prefix=/usr
-
-enable_documentation=yes
-
-PKG_CONFIG="${PKG_CONFIG:-pkg-config}"
-
-# Little helper function for reading args from the commandline.
-# it automatically handles -a b and -a=b variants, and returns 1 if
-# we need to shift $3.
-read_arg() {
-    # $1 = arg name
-    # $2 = arg value
-    # $3 = arg parameter
-    local rematch='^[^=]*=(.*)$'
-    if [[ $2 =~ $rematch ]]; then
-        read "$1" <<< "${BASH_REMATCH[1]}"
-    else
-        read "$1" <<< "$3"
-        # There is no way to shift our callers args, so
-        # return 1 to indicate they should do it instead.
-        return 1
-    fi
-    return 0
-}
-
-while (($# > 0)); do
-    case "${1%%=*}" in
-        --prefix) read_arg prefix "$@" || shift;;
-        --libdir) read_arg libdir "$@" || shift;;
-        --datadir) read_arg datadir "$@" || shift;;
-        --sysconfdir) read_arg sysconfdir "$@" || shift;;
-        --sbindir) read_arg sbindir "$@" || shift;;
-        --mandir) read_arg mandir "$@" || shift;;
-        --disable-documentation) enable_documentation=no;;
-        --program-prefix) read_arg programprefix "$@" || shift;;
-        --exec-prefix) read_arg execprefix "$@" || shift;;
-        --bindir) read_arg bindir "$@" || shift;;
-        --includedir) read_arg includedir "$@" || shift;;
-        --libexecdir) read_arg libexecdir "$@" || shift;;
-        --localstatedir) read_arg localstatedir "$@" || shift;;
-        --sharedstatedir) read_arg sharedstatedir "$@" || shift;;
-        --infodir) read_arg infodir "$@" || shift;;
-        --systemdsystemunitdir) read_arg systemdsystemunitdir "$@" || shift;;
-        --bashcompletiondir) read_arg bashcompletiondir "$@" || shift;;
-        *) echo "Ignoring unknown option '$1'";;
-    esac
-    shift
-done
-
-if ! ${PKG_CONFIG} --exists --print-errors " libkmod >= 23 "; then
-    echo "dracut needs pkg-config and libkmod >= 23." >&2
-    exit 1
-fi
-
-cat > Makefile.inc.$$ <<EOF
-prefix ?= ${prefix}
-libdir ?= ${libdir:-${prefix}/lib}
-datadir ?= ${datadir:-${prefix}/share}
-sysconfdir ?= ${sysconfdir:-${prefix}/etc}
-sbindir ?= ${sbindir:-${prefix}/sbin}
-mandir ?= ${mandir:-${prefix}/share/man}
-enable_documentation ?= ${enable_documentation:-yes}
-bindir ?= ${bindir:-${prefix}/bin}
-KMOD_CFLAGS ?= $(${PKG_CONFIG} --cflags " libkmod >= 23 ")
-KMOD_LIBS ?= $(${PKG_CONFIG} --libs " libkmod >= 23 ")
-EOF
-
-{
-    [[ $programprefix ]] && echo "programprefix ?= ${programprefix}"
-    [[ $execprefix ]] && echo "execprefix ?= ${execprefix}"
-    [[ $includedir ]] && echo "includedir ?= ${includedir}"
-    [[ $libexecdir ]] && echo "libexecdir ?= ${libexecdir}"
-    [[ $localstatedir ]] && echo "localstatedir ?= ${localstatedir}"
-    [[ $sharedstatedir ]] && echo "sharedstatedir ?= ${sharedstatedir}"
-    [[ $infodir ]] && echo "infodir ?= ${infodir}"
-    [[ $systemdsystemunitdir ]] && echo "systemdsystemunitdir ?= ${systemdsystemunitdir}"
-    [[ $bashcompletiondir ]] && echo "bashcompletiondir ?= ${bashcompletiondir}"
-} >> Makefile.inc.$$
-
-mv Makefile.inc.$$ Makefile.inc

debian/changelog

@@ -0,0 +1,53 @@
+dracut (2.26) unstable; urgency=low
+
+  [ Harald Hoyer ]
+  * multipath: install udev rules and helper tools
+  * NEWS update
+  * multipath: install xdr utils
+  * multipath: install multipath kernel module
+  * specfile update
+  * dracut.8: fixed formatting for rootfs and mount options
+  * dracut: check more return codes, check for permissions and use
+    derror
+  * dracut: create initramfs-$(kernelversion).img by default
+  * Makefile: add WITH_SWITCH_ROOT
+  * fips: search different lib paths
+  * kernel-modules: add firewire-ohci to hardcoded modules list
+  * 90dm: install more device mapper kernel modules
+  * specfile update
+
+  [ Peter Jones ]
+  * Use glob for libdir when installing multipath libraries.
+  * Add #!/bin/bash for consistency.
+  * Make sure and get all the multipath related modules.
+  * Bring up multipath devices that are configured in multipath.conf.
+  * Fix missing shell variables.
+  * This has to be executable.
+  * Handle modules with hyphens in their names properly.
+
+  [ Harald Hoyer ]
+  * lvm: scan without monitor
+
+  [ Yanko Kaneti ]
+  * Wildcards need dracut_install
+
+  [ Harald Hoyer ]
+  * lvm/dmraid: make LIBDIR depend on the binary
+  * nfs: install passwd entries for nobody and nfsnobody
+  * nfs: add rd_NFS_DOMAIN parameter to set the NFSv4 domain name
+  * dracut-functions: inst_simple(): do not bail out if target is a dir
+    and exists
+  * dm: install dmsetup
+  * multipath: corrected initqueue parameter
+  * rootfs-block/mount-root: remount root with /etc/fstab filesystem
+    options
+  * test: set PATH
+
+ -- Philippe Seewer <philippe.seewer@.bfh.ch>  Fri, 27 Nov 2009 10:58:26 +0100
+
+dracut (2.21) unstable; urgency=low
+  [ Harald Hoyer ]
+  * fix rd_DASD argument handling (bug #531720)
+  * Resolves: rhbz#531720
+
+ -- Philippe Seewer <philippe.seewer@.bfh.ch>  Fri, 06 Nov 2009 15:52:00 +0100

debian/compat

@@ -0,0 +1 @@
+5

debian/control

@@ -0,0 +1,40 @@
+Source: dracut
+Section: utils
+Priority: optional
+Maintainer: Philippe Seewer <philippe.seewer@bfh.ch>
+Build-Depends: debhelper (>= 5.0), cdbs
+Standards-Version: 3.8.3
+Vcs-Browser: http://dracut.git.sourceforge.net/git/gitweb-index.cgi
+Vcs-Git: git://dracut.git.sourceforge.net/gitroot/dracut/dracut
+
+Package: dracut
+Architecture: all
+Recommends: cryptsetup, dmsetup, dmraid, lvm2, mdadm
+Depends: cpio, module-init-tools, udev, ${misc:Depends}
+Provides: linux-initramfs-tool
+Description: A new initramfs infrastructure
+ Unlike existing initramfs's, this is an attempt at having as little as
+ possible hard-coded into the initramfs as possible.  The initramfs has
+ (basically) one purpose in life -- getting the rootfs mounted so that
+ we can transition to the real rootfs.  This is all driven off of
+ device availability.  Therefore, instead of scripts hard-coded to do
+ various things, we depend on udev to create device nodes for us and
+ then when we have the rootfs's device node, we mount and carry on. 
+ Having the root on MD, LVM2, LUKS is supported as well as NFS, iSCSI,
+ NBD and FCOE with dracut-network.
+
+Package: dracut-network
+Architecture: all
+Recommends: nfs-common, open-iscsi, nbd-client
+Depends: dracut, iputils-arping, dhcp3-client, ${misc:Depends}
+Description: A new initramfs infrastucture
+ Unlike existing initramfs's, this is an attempt at having as little as
+ possible hard-coded into the initramfs as possible.  The initramfs has
+ (basically) one purpose in life -- getting the rootfs mounted so that
+ we can transition to the real rootfs.  This is all driven off of
+ device availability.  Therefore, instead of scripts hard-coded to do
+ various things, we depend on udev to create device nodes for us and
+ then when we have the rootfs's device node, we mount and carry on. 
+ Having the root on MD, LVM2, LUKS is supported as well as NFS, iSCSI,
+ NBD and FCOE with dracut-network.
+

debian/copyright

@@ -0,0 +1,39 @@
+This package was debianized by Philippe Seewer <philippe.seewer@bfh.ch> on
+Fri Nov 20 15:45:00 +0100
+
+Sources can be downloaded from:
+
+    https://sourceforge.net/projects/dracut/
+
+Upstream Maintainer:
+    Harald Hoyer <harald@redhat.com>
+
+Updstream Authors:
+    Victor Lowther <victor.lowther@gmail.com>
+    Warren Togami <wtogami@redhat.com>
+    Jeremy Katz <katzj@redhat.com>
+    Philippe Seewer <philippe.seewer@bfh.ch>
+    David Dillow <dave@thedillows.org>
+    Andreas Thienemann <andreas@bawue.net>
+    Hans de Goede <hdegoede@redhat.com>
+    Marc Grimme <grimme@atix.de>
+    Bill Nottingham <notting@redhat.com>
+    Daniel Drake <dsd@laptop.org>
+    Lance Albertson <lance@osuosl.org>
+    Michael Ploujnikov <plouj@somanetworks.com>
+    Peter Jones <pjones@redhat.com>
+    Dave Jones <davej@redhat.com>
+    Michal Schmidt <mschmidt@redhat.com>
+    Peter Rajnoha <prajnoha@redhat.com>
+    Quentin Armitage <quentin@armitage.org.uk>
+    Sergey Fionov <fionov@gmail.com>
+    Thilo Bangert <thilo.bangert@gmx.net>
+
+Copyright:
+    Copyright 2009 Harald Hoyer <harald@redhat.com>
+
+
+License: GPLv2
+
+On Debian systems, the complete text of the GNU General Public 
+License version 2 can be found in `/usr/share/common-licenses/GPL-2'.

debian/dracut-net.dirs

@@ -0,0 +1,5 @@
+usr/share/dracut/modules.d/40network
+usr/share/dracut/modules.d/95fcoe
+usr/share/dracut/modules.d/95iscsi
+usr/share/dracut/modules.d/95nbd
+usr/share/dracut/modules.d/95nfs

debian/dracut-net.install

@@ -0,0 +1,5 @@
+modules.d/40network	usr/share/dracut/modules.d
+modules.d/95fcoe	usr/share/dracut/modules.d
+modules.d/95iscsi	usr/share/dracut/modules.d
+modules.d/95nbd		usr/share/dracut/modules.d
+modules.d/95nfs		usr/share/dracut/modules.d

debian/dracut.dirs

@@ -0,0 +1,22 @@
+usr/share/dracut
+usr/share/dracut/modules.d/00dash
+usr/share/dracut/modules.d/01fips
+usr/share/dracut/modules.d/90crypt
+usr/share/dracut/modules.d/90dm
+usr/share/dracut/modules.d/90dmraid
+usr/share/dracut/modules.d/90kernel-modules
+usr/share/dracut/modules.d/90lvm
+usr/share/dracut/modules.d/90mdraid
+usr/share/dracut/modules.d/90multipath
+usr/share/dracut/modules.d/95dasd
+usr/share/dracut/modules.d/95dasd_mod
+usr/share/dracut/modules.d/95debug
+usr/share/dracut/modules.d/95resume
+usr/share/dracut/modules.d/95rootfs-block
+usr/share/dracut/modules.d/95terminfo
+usr/share/dracut/modules.d/95udev-rules
+usr/share/dracut/modules.d/95zfcp
+usr/share/dracut/modules.d/95znet
+usr/share/dracut/modules.d/98syslog
+usr/share/dracut/modules.d/99base
+/var/lib/dracut

debian/dracut.docs

@@ -0,0 +1,4 @@
+HACKING
+README.generic
+README.kernel
+README.modules

debian/dracut.install

@@ -0,0 +1,25 @@
+dracut			usr/sbin
+dracut-catimages	usr/sbin
+dracut-update-initramfs	usr/sbin
+dracut-functions	usr/share/dracut
+dracut.conf		etc
+modules.d/00dash		usr/share/dracut/modules.d
+modules.d/01fips		usr/share/dracut/modules.d
+modules.d/90crypt		usr/share/dracut/modules.d
+modules.d/90dm			usr/share/dracut/modules.d
+modules.d/90dmraid		usr/share/dracut/modules.d
+modules.d/90kernel-modules	usr/share/dracut/modules.d
+modules.d/90lvm			usr/share/dracut/modules.d
+modules.d/90mdraid		usr/share/dracut/modules.d
+modules.d/90multipath		usr/share/dracut/modules.d
+modules.d/95dasd		usr/share/dracut/modules.d
+modules.d/95dasd_mod		usr/share/dracut/modules.d
+modules.d/95debug		usr/share/dracut/modules.d
+modules.d/95resume		usr/share/dracut/modules.d
+modules.d/95rootfs-block	usr/share/dracut/modules.d
+modules.d/95terminfo		usr/share/dracut/modules.d
+modules.d/95udev-rules		usr/share/dracut/modules.d
+modules.d/95zfcp		usr/share/dracut/modules.d
+modules.d/95znet		usr/share/dracut/modules.d
+modules.d/98syslog		usr/share/dracut/modules.d
+modules.d/99base		usr/share/dracut/modules.d

debian/dracut.manpages

@@ -0,0 +1,2 @@
+dracut.8
+dracut.conf.5

debian/dracut.postinst

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+set -e
+
+# Regenerate initramfs when we're `installed`
+DPKG_MAINTSCRIPT_PACKAGE='' dracut-update-initramfs -u
+
+#DEBHELPER#

debian/dracut.triggers

@@ -0,0 +1 @@
+interest update-initramfs

debian/rules

@@ -0,0 +1,3 @@
+#!/usr/bin/make -f
+
+include /usr/share/cdbs/1/rules/debhelper.mk

dracut

@@ -0,0 +1,346 @@
+#!/bin/bash
+# 
+# Generator script for a dracut initramfs
+# Tries to retain some degree of compatibility with the command line
+# of the various mkinitrd implementations out there
+#
+
+# Copyright 2005-2009 Red Hat, Inc.  All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# store for logging
+dracut_args="$@"
+
+usage() {
+#                                                       80x25 linebreak here ^
+	echo "Usage: $0 [OPTION]... <initramfs> <kernel-version>
+Creates initial ramdisk images for preloading modules
+
+  -f, --force           Overwrite existing initramfs file.
+  -m, --modules [LIST]  Specify a space-separated list of dracut modules to
+                         call when building the initramfs. Modules are located
+                         in /usr/share/dracut/modules.d.
+  -o, --omit [LIST]     Omit a space-separated list of dracut modules.
+  -a, --add [LIST]      Add a space-separated list of dracut modules.
+  -d, --drivers [LIST]  Specify a space-separated list of kernel modules to
+                        exclusively include in the initramfs.
+  --add-drivers [LIST]  Specify a space-separated list of kernel 
+                        modules to add to the initramfs.
+  --omit-drivers [LIST] Specify a space-separated list of kernel
+                        modules not to add to the initramfs.
+  --filesystems [LIST]  Specify a space-separated list of kernel filesystem
+                        modules to exclusively include in the generic
+                        initramfs.
+  -k, --kmoddir [DIR]   Specify the directory, where to look for kernel 
+                        modules
+  --fwdir [DIR]         Specify additional directories, where to look for 
+                        firmwares, separated by :
+  --kernel-only         Only install kernel drivers and firmware files
+  --no-kernel           Do not install kernel drivers and firmware files
+  --strip               Strip binaries in the initramfs (default)
+  --nostrip             Do not strip binaries in the initramfs
+  --mdadmconf           Include local /etc/mdadm.conf
+  --nomdadmconf         Do not include local /etc/mdadm.conf
+  --lvmconf             Include local /etc/lvm/lvm.conf
+  --nolvmconf             Do not include local /etc/lvm/lvm.conf
+  -h, --help            This message
+  --debug               Output debug information of the build process
+  -v, --verbose         Verbose output during the build process
+  -c, --conf [FILE]     Specify configuration file to use.
+                         Default: /etc/dracut.conf
+  -l, --local           Local mode. Use modules from the current working
+                         directory instead of the system-wide installed in
+                         /usr/share/dracut/modules.d.
+                         Useful when running dracut from a git checkout.
+  -H, --hostonly          Host-Only mode: Install only what is needed for
+                         booting the local host instead of a generic host.
+  -i, --include [SOURCE] [TARGET]
+                        Include the files in the SOURCE directory into the
+                         Target directory in the final initramfs.
+  -I, --install [LIST]  Install the space separated list of files into the
+                         initramfs.
+"
+}
+
+while (($# > 0)); do
+    case $1 in
+	-f|--force) force=yes;;
+	-m|--modules) dracutmodules_l="$2"; shift;;
+	-o|--omit) omit_dracutmodules_l="$2"; shift;;
+	-a|--add) add_dracutmodules_l="$2"; shift;;
+	-d|--drivers) drivers_l="$2"; shift;;
+	--add-drivers) add_drivers_l="$2"; shift;;
+        --omit-drivers) omit_drivers_l+="$2"; shift;;
+	--filesystems) filesystems_l="$2"; shift;;
+	-k|--kmoddir) drivers_dir_l="$2"; shift;;
+	--fwdir) fw_dir_l="$2"; shift;;
+	--kernel-only) kernel_only="yes"; no_kernel="no";;
+	--no-kernel) kernel_only="no"; no_kernel="yes";;
+	--strip) do_strip_l="yes";;
+	--nostrip) do_strip_l="no";;
+        --mdadmconf) mdadmconf_l="yes";;
+        --nomdadmconf) mdadmconf_l="no";;
+        --lvmconf) lvmconf_l="yes";;
+        --nolvmconf) lvmconf_l="no";;
+	-h|--help) usage; exit 1 ;;
+	--debug) debug="yes";;
+	-v|--verbose) beverbose="yes";;
+	-c|--conf) conffile="$2"; shift;;
+	--confdir) confdir="$2"; shift;;
+	-l|--local) allowlocal="yes" ;;
+	-H|--hostonly) hostonly_l="yes" ;;
+	-i|--include) include_src="$2"; include_target="$3"; shift 2;;
+	-I|--install) install_items="$2"; shift;;
+	-*) printf "\nUnknown option: %s\n\n" "$1" >&2; usage; exit 1;;
+	*) break ;;
+    esac
+    shift
+done
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+export PATH
+unset LD_LIBRARY_PATH
+unset GREP_OPTIONS
+
+[[ $debug ]] && { 
+    export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): ';
+    set -x
+}
+
+[[ $dracutbasedir ]] || dracutbasedir=/usr/share/dracut
+
+[[ $allowlocal && -f "$(readlink -f $(dirname $0))/dracut-functions" ]] && dracutbasedir="$(dirname $0)" 
+
+# if we were not passed a config file, try the default one
+if [[ ! -f $conffile ]]; then
+    [[ $allowlocal ]] || conffile="/etc/dracut.conf"
+    [[ $allowlocal ]] && conffile="$dracutbasedir/dracut.conf"
+fi
+
+if [[ ! -d $confdir ]]; then
+    [[ $allowlocal ]] || confdir="/etc/dracut.conf.d"
+    [[ $allowlocal ]] && confdir="$dracutbasedir/dracut.conf.d"
+fi
+
+# source our config dir
+if [ "$confdir" ] && [  -d "$confdir" ]; then
+    for f in "$confdir"/*.conf; do 
+	[ -e "$f" ] && . "$f"
+    done
+fi
+
+# source our config file
+[[ -f $conffile ]] && . "$conffile"
+
+# these optins add to the stuff in the config file
+[[ $add_dracutmodules_l ]] && add_dracutmodules+=" $add_dracutmodules_l"
+[[ $add_drivers_l ]] && add_drivers+=" $add_drivers_l"
+[[ $omit_drivers_l ]] && omit_drivers+=" $omit_drivers_l"
+
+# these options override the stuff in the config file
+[[ $dracutmodules_l ]] && dracutmodules=$dracutmodules_l
+[[ $omit_dracutmodules_l ]] && omit_dracutmodules=$omit_dracutmodules_l
+[[ $drivers_l ]] && drivers=$drivers_l
+[[ $filesystems_l ]] && filesystems=$filesystems_l
+[[ $drivers_dir_l ]] && drivers_dir=$drivers_dir_l
+[[ $fw_dir_l ]] && fw_dir=$fw_dir_l
+[[ $do_strip_l ]] && do_strip=$do_strip_l
+[[ $hostonly_l ]] && hostonly=$hostonly_l
+[[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
+[[ $lvmconf_l ]] && lvmconf=$lvmconf_l
+[[ $dracutbasedir ]] || dracutbasedir=/usr/share/dracut
+[[ $fw_dir ]] || fw_dir=/lib/firmware
+[[ $do_strip ]] || do_strip=yes
+# eliminate IFS hackery when messing with fw_dir
+fw_dir=${fw_dir//:/ }
+
+[[ $hostonly = yes ]] && hostonly="-h"
+[[ $hostonly != "-h" ]] && unset hostonly
+
+if [[ -f $dracutbasedir/dracut-functions ]]; then
+   . $dracutbasedir/dracut-functions
+else
+   echo "Cannot find $dracutbasedir/dracut-functions. Are you running from a git checkout?"
+   echo "Try passing -l as an argument to $0"
+   exit 1
+fi
+
+dracutfunctions=$dracutbasedir/dracut-functions
+export dracutfunctions
+
+dinfo "Executing $0 $dracut_args"
+
+omit_drivers_corrected=""
+for d in $omit_drivers; do
+    strstr " $drivers $add_drivers " " $d " && continue
+    omit_drivers_corrected+="$d|"
+done
+omit_drivers="${omit_drivers_corrected%|}"
+unset omit_drivers_corrected
+
+# This is kinda legacy -- eventually it should go away.
+case $dracutmodules in
+    ""|auto) dracutmodules="all" ;;
+esac
+
+[[ $2 ]] && kernel=$2 || kernel=$(uname -r)
+[[ $1 ]] && outfile=$1 || outfile="/boot/initramfs-$kernel.img"
+abs_outfile=$(readlink -f "$outfile") && outfile="$abs_outfile"
+
+srcmods="/lib/modules/$kernel/"
+[[ $drivers_dir ]] && srcmods="$drivers_dir"
+export srcmods
+
+if [[ -f $outfile && ! $force ]]; then
+    derror "Will not override existing initramfs ($outfile) without --force"
+    exit 1
+fi
+
+outdir=$(dirname "$outfile")
+if ! [[ -d "$outdir" ]]; then
+    derror "Can't write $outfile: Directory $outdir does not exist."
+    exit 1
+fi
+
+if ! [[ -w "$outdir" ]]; then
+    derror "No permission to write $outdir."
+    exit 1
+fi
+
+if [[ -f "$outfile" ]] &&  ! [[ -w "$outfile" ]]; then
+    derror "No permission to write $outfile."
+    exit 1
+fi
+
+hookdirs="cmdline pre-udev pre-trigger netroot pre-mount pre-pivot mount emergency initqueue initqueue-finished initqueue-settled initqueue-timeout
+"
+
+[[ -n "$TMPDIR" ]] && ! [[ -w "$TMPDIR" ]] && unset TMPDIR
+readonly initdir=$(mktemp -d -t initramfs.XXXXXX)
+
+trap 'ret=$?;rm -rf "$initdir";exit $ret;' EXIT # clean up after ourselves no matter how we die.
+trap 'exit 1;' SIGINT # clean up after ourselves no matter how we die.
+
+# Need to be able to have non-root users read stuff (rpcbind etc)
+chmod 755 "$initdir"
+
+export initdir hookdirs dracutbasedir dracutmodules drivers \
+    fw_dir drivers_dir debug beverbose no_kernel kernel_only \
+    add_drivers omit_drivers mdadmconf lvmconf filesystems
+
+if [[ $kernel_only != yes ]]; then
+    # Create some directory structure first
+    for d in bin sbin usr/bin usr/sbin usr/lib etc proc sys sysroot tmp dev/pts var/log var/run $hookdirs; do
+	inst_dir "/$d"
+    done
+fi
+
+# check all our modules to see if they should be sourced.
+# This builds a list of modules that we will install next.
+check_modules
+modules_loaded=" "
+# source our modules.
+for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
+    _d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]}
+    if strstr "$mods_to_load" " $_d_mod "; then
+	if [[ $kernel_only = yes ]]; then
+	    [[ -x $moddir/installkernel ]] && . "$moddir/installkernel"
+	else
+	    [[ -x "$moddir/install" ]] && . "$moddir/install"
+	    if [[ $no_kernel != yes && -x $moddir/installkernel ]]; then
+		. "$moddir/installkernel"
+	    fi
+	fi
+	modules_loaded+="$_d_mod "
+	mods_to_load=${mods_to_load// $_d_mod /}
+    fi
+done
+unset moddir
+
+## final stuff that has to happen
+
+# generate module dependencies for the initrd
+if [[ -d $initdir/lib/modules/$kernel ]]; then
+    if ! depmod -a -b "$initdir" $kernel; then
+        derror "\"depmod -a $kernel\" failed."
+        exit 1
+    fi
+fi
+
+if [[ $include_src && $include_target ]]; then
+    if [[ -f $include_src ]]; then
+        inst $include_src $include_target
+    else
+        mkdir -p "$initdir$include_target"
+        cp -a -t "$initdir$include_target" "$include_src"/*
+    fi
+fi
+
+for item in $install_items; do
+   dracut_install "$item"
+done
+unset item
+
+# make sure that library links are correct and up to date
+cp -ar /etc/ld.so.conf* "$initdir"/etc
+ldconfig -r "$initdir" || [[ $(id -u) != "0" ]] && dinfo "ldconfig might need uid=0 (root) for chroot()"
+
+[[ $beverbose = yes ]] && (du -c "$initdir" | sort -n)
+
+# strip binaries 
+if [[ $do_strip = yes ]] ; then
+    for p in strip grep find; do 
+	if ! which $p >/dev/null 2>&1; then
+	    dwarn "Could not find '$p'. Not stripping binaries in the initramfs."
+	    do_strip=no
+	fi
+    done
+fi
+
+if [[ $do_strip = yes ]] ; then
+    for f in $(find "$initdir" -type f \( -perm -0100 -or -perm -0010 -or -perm -0001 -or -path '*/lib/modules/*.ko' \) ); do
+        # do not strip files with a .hmac file,
+        # because that would alter the checksum
+        if ! [[ -f "${f%/*}/.${f##*/}.hmac" ]]; then
+	    dinfo "Stripping '$f'"
+	    strip -g "$f" 2>/dev/null|| :
+        else
+            dinfo "Not stripping '$f', because it has a hmac checksum file."
+        fi
+    done
+fi
+
+if strstr "$modules_loaded" " fips " && command -v prelink >/dev/null; then
+    for i in $initdir/bin/* \
+	$initdir/bin/* \
+	$initdir/usr/bin/* \
+	$initdir/usr/sbin/*; do
+	[ -x $i ] && prelink -u $i &>/dev/null
+    done
+fi
+
+type pigz &>/dev/null && gzip=pigz || gzip=gzip
+if ! ( set -o pipefail; umask 077; cd "$initdir"; find . |cpio -R root:root -H newc -o --quiet| \
+    $gzip -9 > "$outfile"; ); then
+    derror "dracut: creation of $outfile failed"
+    rm -f "$outfile"
+    exit 1
+fi
+dinfo "Wrote $outfile"
+dinfo $(ls -l "$outfile")
+
+exit 0
+

dracut-bash-completion.sh

@@ -1,78 +0,0 @@
-#
-# Copyright 2013 Red Hat, Inc.  All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-__contains_word () {
-        local word=$1; shift
-        for w in $*; do [[ $w = $word ]] && return 0; done
-        return 1
-}
-
-_dracut() {
-        local field_vals= cur=${COMP_WORDS[COMP_CWORD]} prev=${COMP_WORDS[COMP_CWORD-1]}
-        local -A OPTS=(
-                [STANDALONE]='-f -v -q -l -H -h -M -N
-                              --ro-mnt --force --kernel-only --no-kernel --strip --nostrip
-                              --hardlink --nohardlink --noprefix --mdadmconf --nomdadmconf
-                              --lvmconf --nolvmconf --debug --profile --verbose --quiet
-                              --local --hostonly --no-hostonly --fstab --help --bzip2 --lzma
-                              --xz --zstd --no-compress --gzip --list-modules --show-modules --keep
-                              --printsize --regenerate-all --noimageifnotneeded --early-microcode
-                              --no-early-microcode --print-cmdline --reproducible --uefi'
-
-                       [ARG]='-a -m -o -d -I -k -c -L --kver --add --force-add --add-drivers
-                              --omit-drivers --modules --omit --drivers --filesystems --install
-                              --fwdir --libdirs --fscks --add-fstab --mount --device --nofscks
-                              --kmoddir --conf --confdir --tmpdir --stdlog --compress --prefix
-                              --kernel-cmdline --sshkey --persistent-policy --install-optional
-                              --loginstall --uefi-stub --kernel-image
-                              '
-        )
-
-        if __contains_word "$prev" ${OPTS[ARG]}; then
-                case $prev in
-                        --kmoddir|-k|--fwdir|--confdir|--tmpdir)
-                                comps=$(compgen -d -- "$cur")
-                                compopt -o filenames
-                        ;;
-                        -c|--conf|--sshkey|--add-fstab|--add-device|-I|--install|--install-optional)
-                                comps=$(compgen -f -- "$cur")
-                                compopt -o filenames
-                        ;;
-                        -a|-m|-o|--add|--modules|--omit)
-                                comps=$(dracut --list-modules 2>/dev/null)
-                        ;;
-                        --persistent-policy)
-                                comps=$(cd /dev/disk/; echo *)
-                        ;;
-                        --kver)
-                                comps=$(cd /lib/modules; echo [0-9]*)
-                        ;;
-                        *)
-                                return 0
-                        ;;
-                esac
-                COMPREPLY=( $(compgen -W '$comps' -- "$cur") )
-                return 0
-        fi
-
-        if [[ $cur = -* ]]; then
-                COMPREPLY=( $(compgen -W '${OPTS[*]}' -- "$cur") )
-                return 0
-        fi
-}
-
-complete -F _dracut dracut

dracut-catimages

@@ -1,5 +1,5 @@
 #!/bin/bash --norc
-#
+
 # Copyright 2009 Red Hat, Inc.  All rights reserved.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -31,13 +31,12 @@ derror() {
 
 usage() {
 #                                                       80x25 linebreak here ^
-    cat << EOF
-Usage: $0 [OPTION]... <initramfs> <base image> [<image>...]
+	echo "Usage: $0 [OPTION]... <initramfs> <base image> [<image>...]
 Creates initial ramdisk image by concatenating several images from the command
 line and /boot/dracut/
 
   -f, --force           Overwrite existing initramfs file.
-  -i, --imagedir        Directory with additional images to add
+  -i, --imagedir        Directory with additional images to add 
                         (default: /boot/dracut/)
   -o, --overlaydir      Overlay directory, which contains files that
                         will be used to create an additional image
@@ -46,7 +45,7 @@ line and /boot/dracut/
   -h, --help            This message
   --debug               Output debug information of the build process
   -v, --verbose         Verbose output during the build process
-EOF
+"
 }
 
 
@@ -55,16 +54,16 @@ overlay=/var/lib/dracut/overlay
 
 while (($# > 0)); do
     case $1 in
-        -f|--force) force=yes;;
-        -i|--imagedir) imagedir=$2;shift;;
-        -o|--overlaydir) overlay=$2;shift;;
-        --nooverlay) no_overlay=yes;shift;;
-        --noimagedir) no_imagedir=yes;shift;;
-        -h|--help) usage; exit 1 ;;
-        --debug) debug="yes";;
-        -v|--verbose) beverbose="yes";;
-        -*) printf "\nUnknown option: %s\n\n" "$1" >&2; usage; exit 1;;
-        *) break ;;
+	-f|--force) force=yes;;
+	-i|--imagedir) imagedir=$2;shift;;
+	-o|--overlaydir) overlay=$2;shift;;
+	--nooverlay) no_overlay=yes;shift;;
+	--noimagedir) no_imagedir=yes;shift;;
+	-h|--help) usage; exit 1 ;;
+	--debug) debug="yes";;
+	-v|--verbose) beverbose="yes";;
+	-*) printf "\nUnknown option: %s\n\n" "$1" >&2; usage; exit 1;;
+	*) break ;;
     esac
     shift
 done
@@ -109,18 +108,18 @@ fi
 
 if [[ ! $no_imagedir ]]; then
     for i in "$imagedir/"*.img; do
-        [[ -f $i ]] && images+=("$i")
+	[[ -f $i ]] && images+=("$i")
     done
 fi
 
 images+=($@)
 
 dinfo "Using base image $baseimage"
-cat -- "$baseimage" > "$outfile"
+cat "$baseimage" > "$outfile"
 
-for i in "${images[@]}"; do
+for i in "${images[@]}"; do 
     dinfo "Appending $i"
-    cat -- "$i" >> "$outfile"
+    cat "$i" >> "$outfile"
 done
 
 dinfo "Created $outfile"

dracut-catimages.8

@@ -0,0 +1,52 @@
+.TH DRACUT-CATIMAGES 8 "June 2009" "Linux"
+.SH NAME
+dracut-catimages \- creates initial ramdisk image by concatenating images
+.SH SYNOPSIS
+\fBdracut-catimages\fR [\fIOPTION\fR]... \fI<initramfs base image>\fR \fI[<image>...]\fR
+
+.SH DESCRIPTION
+.B dracut-catimages
+creates an initial ramdisk image by concatenating several images from the command
+line and /boot/dracut/*.img
+
+.SH OPTIONS
+.TP
+.BR \-f ", " \-\-force
+overwrite existing initramfs file.
+.TP
+.BR \-i ", " \-\-imagedir
+Directory with additional images to add (default: /boot/dracut/)
+.TP
+.BR \-o ", " \-\-overlaydir
+Overlay directory, which contains additional files that will be used to create an additional image
+.TP
+.BR \-\-nooverlay
+Do not use the overlay directory
+.TP
+.BR \-\-noimagedir
+Do not use the additional image directory
+.TP
+.BR \-h ", " \-\-help
+display help text and exit. 
+.TP
+.B \-\-debug
+output debug information of the build process
+.TP
+.BR \-v ", " \-\-verbose
+verbose output during the build process
+
+.SH FILES
+.TP
+.B /boot/dracut/*.img
+.TP
+.B 
+.SH AUTHORS
+.nf
+Harald Hoyer <harald@redhat.com>
+.fi
+.SH AVAILABILITY
+The dracut-catimages command is part of the dracut package and is available from
+http://sourceforge.net/apps/trac/dracut/wiki
+
+.SH SEE ALSO
+.BR dracut (8)

dracut-catimages.8.asc

@@ -1,59 +0,0 @@
-DRACUT-CATIMAGES(8)
-===================
-:doctype: manpage
-:man source:   dracut
-:man manual:   dracut
-
-NAME
-----
-dracut-catimages - creates initial ramdisk image by concatenating images
-
-SYNOPSIS
---------
-**dracut-catimages** [_OPTION_...] _<initramfs base image>_ [_<image>_...]
-
-DESCRIPTION
------------
-dracut-catimages creates an initial ramdisk image by concatenating several
-images from the command line and /boot/dracut/*.img
-
-OPTIONS
--------
-**-f, --force**::
-    overwrite existing initramfs file.
-
-**-i, --imagedir**::
-    Directory with additional images to add (default: /boot/dracut/)
-
-**-o, --overlaydir**::
-    Overlay directory, which contains additional files that will be used to
-    create an additional image
-
-**--nooverlay**:: Do not use the overlay directory
-
-**--noimagedir**:: Do not use the additional image directory
-
-**-h, --help**:: display help text and exit.
-
-**--debug**:: output debug information of the build process
-
-**-v, --verbose**:: verbose output during the build process
-
-FILES
------
-_/boot/dracut/*.img_::
-    images to work with
-
-AUTHORS
--------
-Harald Hoyer
-
-AVAILABILITY
-------------
-The dracut-catimages command is part of the dracut package and is available from
-link:$$https://dracut.wiki.kernel.org$$[https://dracut.wiki.kernel.org]
-
-SEE ALSO
---------
-*dracut*(8)
-

dracut-functions

@@ -0,0 +1,661 @@
+#!/bin/bash
+#
+# functions used by dracut and other tools.
+#
+# Copyright 2005-2009 Red Hat, Inc.  All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+IF_RTLD=""
+IF_dynamic=""
+
+# Generic substring function.  If $2 is in $1, return 0.
+strstr() { [[ $1 =~ $2 ]]; }
+
+# Log initrd creation.
+if ! [[ $dracutlogfile ]]; then
+    [[ $dracutbasedir = /usr/share/dracut ]] && \
+	dracutlogfile=/var/log/dracut.log || \
+	dracutlogfile=$HOME/dracut.log
+    if [[ -w ${dracutlogfile%/*} ]]; then
+        >>"$dracutlogfile"
+    fi
+fi
+
+dwarning() {
+    echo "W: $@" >&2
+    [[ -w $dracutlogfile ]] && echo $(date) "Warn:" $@ >>"$dracutlogfile"
+}
+
+dinfo() {
+    [[ $beverbose ]] && echo "I: $@" >&2
+    [[ -w $dracutlogfile ]] && echo $(date) "Info:" $@ >>"$dracutlogfile"
+}
+
+derror() {
+    echo "E: $@" >&2
+    [[ -w $dracutlogfile ]] && echo $(date) "Err:" $@ >>"$dracutlogfile"
+}
+
+
+
+# normalize_path <path>
+# Prints the normalized path, where it removes any duplicated
+# and trailing slashes.
+# Example:
+# $ normalize_path ///test/test//
+# /test/test
+normalize_path() {
+    shopt -q -s extglob
+    set -- "${1//+(\/)//}"
+    shopt -q -u extglob
+    echo "${1%/}"
+}
+
+# convert_abs_rel <from> <to>
+# Prints the relative path, when creating a symlink to <to> from <from>.
+# Example:
+# $ convert_abs_rel /usr/bin/test /bin/test-2
+# ../../bin/test-2
+# $ ln -s $(convert_abs_rel /usr/bin/test /bin/test-2) /usr/bin/test
+convert_abs_rel() {
+    local __current __absolute __abssize __cursize __newpath
+    local -i __i __level
+
+    set -- "$(normalize_path "$1")" "$(normalize_path "$2")"
+
+    # corner case #1 - self looping link
+    [[ "$1" == "$2" ]] && { echo "${1##*/}"; return; }
+
+    # corner case #2 - own dir link
+    [[ "${1%/*}" == "$2" ]] && { echo "."; return; }
+
+    IFS="/" __current=($1)
+    IFS="/" __absolute=($2)
+
+    __abssize=${#__absolute[@]}
+    __cursize=${#__current[@]}
+
+    while [[ ${__absolute[__level]} == ${__current[__level]} ]]
+    do
+        (( __level++ ))
+        if (( __level > __abssize || __level > __cursize ))
+        then
+            break
+        fi
+    done
+
+    for ((__i = __level; __i < __cursize-1; __i++))
+    do
+        if ((__i > __level))
+        then
+            __newpath=$__newpath"/"
+        fi
+        __newpath=$__newpath".."
+    done
+
+    for ((__i = __level; __i < __abssize; __i++))
+    do
+        if [[ -n $__newpath ]]
+        then
+            __newpath=$__newpath"/"
+        fi
+        __newpath=$__newpath${__absolute[__i]}
+    done
+
+    echo "$__newpath"
+}
+
+# returns OK if $1 contains $2 at the beginning
+str_starts() {
+    [ "${1#$2*}" != "$1" ]
+}
+
+ln_r() {
+    local _source=$1
+    local _dest=$2
+
+    if ! str_starts "$_source" "/"; then
+        ln -sfn "$_source" "${initdir}/${_dest}"
+    else
+        [[ -d "${_dest%/*}" ]] && _dest=$(readlink -f "${_dest%/*}")/${_dest##*/}
+        ln -sfn $(convert_abs_rel "${_dest}" "${_source}") "${initdir}/${_dest}"
+    fi
+}
+
+get_fs_env() {
+    if [[ -x /lib/udev/vol_id ]]; then
+	eval $(/lib/udev/vol_id --export $1)
+    elif find_binary blkid >/dev/null; then
+	eval $(blkid -o udev $1)
+    else
+	return 1
+    fi
+}
+
+get_fs_type() (
+    get_fs_env $1 || return
+    echo $ID_FS_TYPE
+)
+
+get_fs_uuid() (
+    get_fs_env $1 || return
+    echo $ID_FS_UUID
+)
+
+# finds the major:minor of the block device backing the root filesystem.
+find_block_device() {
+    local rootdev blkdev fs type opts misc
+    while read blkdev fs type opts misc; do
+	[[ $blkdev = rootfs ]] && continue # skip rootfs entry
+	[[ $fs = $1 ]] && { rootdev=$blkdev; break; } # we have a winner!
+    done < /proc/mounts
+    [[ -b $rootdev ]] || return 1 # oops, not a block device.
+    # get major/minor for the device
+    ls -nLl "$rootdev" | \
+	(read x x x x maj min x; maj=${maj//,/}; echo $maj:$min)
+}
+
+find_root_block_device() { find_block_device /; }
+
+# Walk all the slave relationships for a given block device.
+# Stop when our helper function returns success
+# $1 = function to call on every found block device
+# $2 = block device in major:minor format
+check_block_and_slaves() {    
+    local x 
+    [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry.
+    "$1" $2 && return
+    check_vol_slaves "$@" && return 0
+    if [[ -f "/sys/dev/block/$2/../dev" ]]; then
+	check_block_and_slaves $1 $(cat "/sys/dev/block/$2/../dev") &&  return 0
+    fi
+    [[ -d /sys/dev/block/$2/slaves ]] || return 1
+    for x in /sys/dev/block/$2/slaves/*/dev; do
+        [[ -f $x ]] || continue
+	check_block_and_slaves $1 $(cat "$x") &&  return 0
+    done
+    return 1
+}
+
+get_numeric_dev() {
+    ls -lH "$1" | { read a b c d maj min rest; printf "%d:%d" ${maj%%,} $min;}
+}
+
+# ugly workaround for the lvm design
+# There is no volume group device,
+# so, there are no slave devices for volume groups.
+# Logical volumes only have the slave devices they really live on,
+# but you cannot create the logical volume without the volume group.
+# And the volume group might be bigger than the devices the LV needs.
+check_vol_slaves() {
+    for i in /dev/mapper/*; do 
+	lv=$(get_numeric_dev $i)
+	if [[ $lv = $2 ]]; then
+	    vg=$(lvm lvs --noheadings -o vg_name $i 2>/dev/null)
+	    # strip space
+	    vg=$(echo $vg)
+	    if [[ $vg ]]; then
+		for pv in $(lvm vgs --noheadings -o pv_name "$vg" 2>/dev/null); \
+		    do
+ 		    check_block_and_slaves $1 $(get_numeric_dev $pv) \
+			&&  return 0
+		done
+	    fi
+	fi
+    done
+    return 1
+}
+
+# Install a directory, keeping symlinks as on the original system.
+# Example: if /lib points to /lib64 on the host, "inst_dir /lib/file"
+# will create ${initdir}/lib64, ${initdir}/lib64/file,
+# and a symlink ${initdir}/lib -> lib64.
+inst_dir() {
+    [[ -e ${initdir}/"$1" ]] && return 0  # already there
+
+    local _dir="$1" _part="${1%/*}" _file
+    while [[ "$_part" != "${_part%/*}" ]] && ! [[ -e "${initdir}/${_part}" ]]; do
+        _dir="$_part $_dir"
+        _part=${_part%/*}
+    done
+
+        # iterate over parent directories
+    for _file in $_dir; do
+        [[ -e "${initdir}/$_file" ]] && continue
+        if [[ -L $_file ]]; then
+            inst_symlink "$_file"
+        else
+            # create directory
+            mkdir -m 0755 -p "${initdir}/$_file" || return 1
+            [[ -e "$_file" ]] && chmod --reference="$_file" "${initdir}/$_file"
+            chmod u+w "${initdir}/$_file"
+        fi
+    done
+}
+
+# $1 = file to copy to ramdisk
+# $2 (optional) Name for the file on the ramdisk
+# Location of the image dir is assumed to be $initdir
+# We never overwrite the target if it exists.
+inst_simple() {
+    local src target 
+    [[ -f $1 ]] || return 1
+    src=$1 target="${2:-$1}"
+    if ! [[ -d ${initdir}$target ]]; then
+        [[ -e ${initdir}$target ]] && return 0
+        inst_dir "${target%/*}"
+    fi
+    # install checksum files also
+    if [[ -e  "${src%/*}/.${src##*/}.hmac" ]]; then 
+	inst "${src%/*}/.${src##*/}.hmac" "${target%/*}/.${target##*/}.hmac"
+    fi
+    dinfo "Installing $src" 
+    cp -pfL "$src" "${initdir}$target"
+}
+
+# Same as above, but specialized to handle dynamic libraries.
+# It handles making symlinks according to how the original library
+# is referenced.
+inst_library() {
+    local src=$1 dest=${2:-$1}
+    [[ -e $initdir$dest ]] && return 0
+    if [[ -L $src ]]; then
+	# install checksum files also
+        if [[ -e  "${src%/*}/.${src##*/}.hmac" ]]; then 
+            inst "${src%/*}/.${src##*/}.hmac" "${dest%/*}/.${dest##*/}.hmac"
+        fi
+	reallib=$(readlink -f "$src")
+	lib=${src##*/}
+	inst_simple "$reallib" "$reallib"
+	inst_dir "${dest%/*}"
+	ln_r "$reallib" "$dest"
+    else
+	inst_simple "$src" "$dest"
+    fi
+}
+
+# find a binary.  If we were not passed the full path directly,
+# search in the usual places to find the binary.
+find_binary() {
+    local binpath="/bin /sbin /usr/bin /usr/sbin" p
+    [[ -z ${1##/*} && -x $1 ]] && { echo $1; return 0; } 
+    for p in $binpath; do
+	[[ -x $p/$1 ]] && { echo "$p/$1"; return 0; }
+    done
+    return 1
+}
+
+# Same as above, but specialized to install binary executables.
+# Install binary executable, and all shared library dependencies, if any.
+inst_binary() {
+    local bin target
+    bin=$(find_binary "$1") || return 1
+    target=${2:-$bin}
+    inst_symlink $bin $target && return 0
+    local LDSO NAME IO FILE ADDR I1 n f TLIBDIR
+    [[ -e $initdir$target ]] && return 0
+    # I love bash!
+    LC_ALL=C ldd $bin 2>/dev/null | while read line; do
+	[[ $line = 'not a dynamic executable' ]] && return 1
+	if [[ $line =~ not\ found ]]; then
+	    derror "Missing a shared library required by $bin."
+	    derror "Run \"ldd $bin\" to find out what it is."
+	    derror "dracut cannot create an initrd."
+	    exit 1
+	fi
+	so_regex='([^ ]*/lib[^/]*/[^ ]*\.so[^ ]*)'
+	[[ $line =~ $so_regex ]] || continue
+	FILE=${BASH_REMATCH[1]}
+	[[ -e ${initdir}$FILE ]] && continue
+	# see if we are loading an optimized version of a shared lib.
+	lib_regex='^(/lib[^/]*).*'
+	if [[ $FILE =~ $lib_regex ]]; then
+            TLIBDIR=${BASH_REMATCH[1]}
+            BASE=${FILE##*/}
+	    # prefer nosegneg libs, then unoptimized ones.
+	    for f in "$TLIBDIR/i686/nosegneg" "$TLIBDIR"; do
+		[[ -e $f/$BASE ]] || continue
+		FILE=$f/$BASE
+		break
+	    done
+	    inst_library "$FILE" "$TLIBDIR/$BASE"
+            IF_dynamic=yes
+	    continue
+	fi
+        inst_library "$FILE" 
+    done
+    inst_simple "$bin" "$target"
+}
+
+# same as above, except for shell scripts.
+# If your shell script does not start with shebang, it is not a shell script.
+inst_script() {
+    [[ -f $1 ]] || return 1
+    local line
+    read -r -n 80 line <"$1"
+    # If debug is set, clean unprintable chars to prevent messing up the term
+    [[ $debug ]] && line=$(echo -n "$line" | tr -c -d '[:print:][:space:]')
+    shebang_regex='(#! *)(/[^ ]+).*'
+    [[ $line =~ $shebang_regex ]] || return 1
+    inst "${BASH_REMATCH[2]}" && inst_simple "$@"
+}
+
+# same as above, but specialized for symlinks
+inst_symlink() {
+    local _src=$1 _target=${2:-$1} _realsrc
+    strstr "$1" "/" || return 1
+    [[ -L $1 ]] || return 1
+    [[ -L $initdir/$_target ]] && return 0
+    _realsrc=$(readlink -f "$_src")
+    [[ ${_realsrc#/} = ${_realsrc} ]] && _realsrc="${_src%/*}/${_realsrc}"
+    if ! [[ -e $initdir/$_realsrc ]]; then
+        if [[ -d $_realsrc ]]; then
+            inst_dir "$_realsrc"
+        else
+            inst "$_realsrc"
+        fi
+    fi
+    [[ ! -e $initdir/${_target%/*} ]] && inst_dir "${_target%/*}"
+
+    ln_r "${_realsrc}" "${_target}"
+}
+
+# find a udev rule in the usual places.
+find_rule() {
+    [[ -f $1 ]] && { echo "$1"; return 0; }
+    for r in . /lib/udev/rules.d /etc/udev/rules.d $dracutbasedir/rules.d; do
+	[[ -f $r/$1 ]] && { echo "$r/$1"; return 0; }
+    done
+    return 1
+}
+
+# udev rules always get installed in the same place, so
+# create a function to install them to make life simpler.
+inst_rules() { 
+    local target=/etc/udev/rules.d
+    inst_dir "/lib/udev/rules.d"
+    inst_dir "$target"
+    for rule in "$@"; do 
+	rule=$(find_rule "$rule") && \
+	    inst_simple "$rule" "$target/${rule##*/}"
+    done
+}
+
+# general purpose installation function
+# Same args as above.
+inst() {
+    case $# in
+        1) ;;
+        2)
+            [[ -z $initdir ]] && [[ -d $2 ]] && export initdir=$2
+            [[ $initdir = $2 ]] && set $1
+            ;;
+        3)
+	    [[ -z $initdir ]] && export initdir=$2 
+            set $1 $3
+            ;;
+        *)
+            derror "inst only takes 1 or 2 or 3 arguments"
+            exit 1
+            ;;
+    esac
+    for x in inst_symlink inst_script inst_binary inst_simple; do
+       $x "$@" && return 0
+    done
+    return 1
+}
+
+# install function specialized for hooks
+# $1 = type of hook, $2 = hook priority (lower runs first), $3 = hook
+# All hooks should be POSIX/SuS compliant, they will be sourced by init.
+inst_hook() {
+    if ! [[ -f $3 ]]; then
+	derror "Cannot install a hook ($3) that does not exist."
+	derror "Aborting initrd creation."
+	exit 1
+    elif ! strstr "$hookdirs" "$1"; then
+	derror "No such hook type $1. Aborting initrd creation." 
+	exit 1
+    fi
+    inst_simple "$3" "/${1}/${2}${3##*/}"
+}
+
+dracut_install() {
+    if [[ $1 = '-o' ]]; then 
+	local optional=yes
+	shift
+    fi
+    while (($# > 0)); do
+	if ! inst "$1" ; then
+	    if [[ $optional = yes ]]; then
+		dinfo "Skipping program $1 as it cannot be found and is flagged to be optional"
+	    else
+		derror "Failed to install $1"
+		exit 1
+            fi
+	fi
+	shift
+    done
+}
+
+check_module_deps() {
+    local moddir dep ret
+    # if we are already set to be loaded, we do not have to be checked again.
+    strstr "$mods_to_load" " $1 " && return
+    # turn a module name into a directory, if we can.
+    moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+    [[ -d $moddir && -x $moddir/install ]] || return 1
+    # if we do not have a check script, we are unconditionally included
+    if [[ -x $moddir/check ]]; then
+	"$moddir/check"
+        ret=$?
+	# a return value of 255 = load module only as a dependency.
+	((ret==0||ret==255)) || return 1
+	for dep in $("$moddir/check" -d); do
+	    check_module_deps "$dep" && continue
+	    dwarning "Dependency $mod failed."
+	    return 1
+	done
+    fi
+    mods_to_load+=" $1 "
+}
+
+should_source_module() {
+    local dep
+    if [[ $kernel_only = yes ]]; then
+        [[ -x $1/installkernel ]] && return 0
+        return 1
+    fi
+    [[ -x $1/install ]] || [[ -x $1/installkernel ]] || return 1
+    [[ -x $1/check ]] || return 0
+    "$1/check" $hostonly || return 1
+    for dep in $("$1/check" -d); do
+	check_module_deps "$dep" && continue
+	dwarning "Cannot load dracut module \"$mod\", dependencies failed."
+	return 1
+    done
+}
+
+check_modules() {
+    local modcheck;
+    local mod;
+    for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
+	local mod=${moddir##*/}; mod=${mod#[0-9][0-9]}
+	# If we are already scheduled to be loaded, no need to check again.
+	strstr "$mods_to_load" " $mod " && continue
+	# This should never happen, but...
+	[[ -d $moddir ]] || continue
+	[[ $dracutmodules != all ]] && ! strstr "$dracutmodules" "$mod" && \
+	    continue
+	strstr "$omit_dracutmodules" "$mod" && continue
+	if ! strstr "$add_dracutmodules" "$mod"; then
+	    should_source_module "$moddir" || continue
+        fi
+	mods_to_load+=" $mod "
+    done
+
+    modcheck=$add_dracutmodules
+    [[ $dracutmodules != all ]] && modcheck="$m $dracutmodules"
+    for mod in $modcheck; do
+        strstr "$mods_to_load" "$mod" && continue
+        strstr "$omit_dracutmodules" "$mod" && continue
+        dwarning "Dracut module \"$mod\" cannot be found."
+    done
+}
+
+# Install a single kernel module along with any firmware it may require.
+# $1 = full path to kernel module to install
+install_kmod_with_fw() {
+    local modname=${1##*/} fwdir found
+    modname=${modname%.ko*}
+    # no need to go further if the module is already installed
+    [[ -e  "${initdir}/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" ]] && return 0
+
+    if [[ $omit_drivers ]]; then
+        local _kmod=${1##*/}
+        _kmod=${_kmod%.ko}
+        _kmod=${_kmod/-/_}
+        if [[ "$_kmod" =~ $omit_drivers ]]; then
+            dinfo "Omitting driver $_kmod"
+            return 1
+        fi
+        if [[ "${1##*/lib/modules/$kernel/}" =~ $omit_drivers ]]; then
+            dinfo "Omitting driver $_kmod"
+            return 1
+        fi
+    fi
+
+    inst_simple "$1" "/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" || \
+	return $?
+
+    for fw in $(modinfo -k $kernel -F firmware $1 2>/dev/null); do
+	found=''
+	for fwdir in $fw_dir; do
+	    if [[ -d $fwdir && -f $fwdir/$fw ]]; then
+		inst_simple "$fwdir/$fw" "/lib/firmware/$fw"
+		found=yes
+	    fi
+	done
+	if [[ $found != yes ]]; then
+	    dinfo "Possible missing firmware \"${fw}\" for kernel module \"${mod}.ko\""
+	fi
+    done
+    return 0
+}
+
+# Do something with all the dependencies of a kernel module.
+# Note that kernel modules depend on themselves using the technique we use
+# $1 = function to call for each dependency we find 
+#      It will be passed the full path to the found kernel module 
+# $2 = module to get dependencies for
+# rest of args = arguments to modprobe
+for_each_kmod_dep() {
+    local func=$1 kmod=$2 cmd modpapth options 
+    shift 2
+    modprobe "$@" --ignore-install --show-depends $kmod 2>/dev/null | ( \
+        local found=0;
+	while read cmd modpath options; do
+	    [[ $cmd = insmod ]] || continue
+	    $func ${modpath} || exit $?
+            found=1
+    done; [[ $found -eq 0 ]] && exit 1; exit 0;)
+    return $?
+}
+
+# filter kernel modules to install certain modules that meet specific
+# requirements.
+# $1 = function to call with module name to filter.
+#      This function will be passed the full path to the module to test.
+# The behaviour of this function can vary depending on whether $hostonly is set.
+# If it is, we will only look at modules that are already in memory.
+# If it is not, we will look at all kernel modules
+# This function returns the full filenames of modules that match $1
+filter_kernel_modules () (
+    if ! [[ $hostonly ]]; then
+        filtercmd='find "$srcmods/kernel/drivers" "$srcmods/updates" "$srcmods/extra" "$srcmods/weak-updates" -name "*.ko" -o -name "*.ko.gz" 2>/dev/null'
+    else
+	filtercmd='cut -d " " -f 1 </proc/modules|xargs modinfo -F filename -k $kernel'
+    fi
+    for modname in $(eval $filtercmd); do
+        case $modname in
+            *.ko)
+                "$1" "$modname" && echo "$modname"
+                ;;
+            *.ko.gz)
+                gzip -dc "$modname" > $initdir/$$.ko
+                $1 $initdir/$$.ko && echo "$modname"
+                rm -f $initdir/$$.ko
+                ;;
+        esac
+    done
+)
+
+# install kernel modules along with all their dependencies.
+instmods() {
+    [[ $no_kernel = yes ]] && return
+    local mod mpargs modpath modname cmd
+    local ret=0
+    while (($# > 0)); do
+	mod=${1%.ko*}
+	case $mod in
+	    =*) # This introduces 2 incompatible meanings for =* arguments
+                # to instmods.  We need to decide which one to keep.
+		if [[ $mod = =ata && -f $srcmods/modules.block ]] ; then 
+		    instmods $mpargs $(egrep 'ata|ahci' "${srcmods}/modules.block")
+		elif [ -f $srcmods/modules.${mod#=} ]; then
+		    instmods $mpargs $(cat ${srcmods}/modules.${mod#=} )
+		else
+		    instmods $mpargs $(find "$srcmods" -path "*/${mod#=}/*")
+		fi
+		;;
+	    --*) 
+	        mod=${mod##*/}
+                mpargs+=" $mod";;
+            i2o_scsi)
+                    # Must never run this diagnostic-only module
+                    shift; continue;
+                ;;
+	    *)  
+                # if we are already installed, skip this module and go on
+	        # to the next one.
+	        [[ -f $initdir/$1 ]] && { shift; continue; }
+
+	        mod=${mod##*/}
+
+                if [[ $omit_drivers ]] && [[ "$1" =~ $omit_drivers ]]; then
+                    dinfo "Omitting driver ${mod##$srcmods}"
+                    shift; continue;
+                fi
+
+		# If we are building a host-specific initramfs and this
+		# module is not already loaded, move on to the next one.
+		[[ $hostonly ]] && ! grep -q "${mod//-/_}" /proc/modules && \
+	        ! echo $add_drivers | grep -qe "\<${mod}\>" &&	{
+		    shift; continue; 
+		}
+		# ok, load the module, all its dependencies, and any firmware
+		# it may require
+		for_each_kmod_dep install_kmod_with_fw $mod \
+		    --set-version $kernel -d ${srcmods%%/lib/modules/*}/
+		ret=$((ret+$?))
+                ;;
+	esac      
+	shift
+    done
+    return $ret
+} 
+
+# vim:ts=8:sw=4:sts=4:et

dracut-functions.sh

@@ -1,709 +0,0 @@
-#!/bin/bash
-#
-# functions used by dracut and other tools.
-#
-# Copyright 2005-2009 Red Hat, Inc.  All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-export LC_MESSAGES=C
-
-# is_func <command>
-# Check whether $1 is a function.
-is_func() {
-    [[ "$(type -t "$1")" = "function" ]]
-}
-
-
-# Generic substring function.  If $2 is in $1, return 0.
-strstr() { [[ $1 = *"$2"* ]]; }
-# Generic glob matching function. If glob pattern $2 matches anywhere in $1, OK
-strglobin() { [[ $1 = *$2* ]]; }
-# Generic glob matching function. If glob pattern $2 matches all of $1, OK
-strglob() { [[ $1 = $2 ]]; }
-# returns OK if $1 contains literal string $2 at the beginning, and isn't empty
-str_starts() { [ "${1#"$2"*}" != "$1" ]; }
-# returns OK if $1 contains literal string $2 at the end, and isn't empty
-str_ends() { [ "${1%*"$2"}" != "$1" ]; }
-
-# find a binary.  If we were not passed the full path directly,
-# search in the usual places to find the binary.
-find_binary() {
-    if [[ -z ${1##/*} ]]; then
-        if [[ -x $1 ]] || { [[ "$1" == *.so* ]] && ldd "$1" &>/dev/null; };  then
-            printf "%s\n" "$1"
-            return 0
-        fi
-    fi
-
-    type -P "${1##*/}"
-}
-
-ldconfig_paths()
-{
-    ldconfig -pN 2>/dev/null | grep -E -v '/(lib|lib64|usr/lib|usr/lib64)/[^/]*$' | sed -n 's,.* => \(.*\)/.*,\1,p' | sort | uniq
-}
-
-# Version comparision function.  Assumes Linux style version scheme.
-# $1 = version a
-# $2 = comparision op (gt, ge, eq, le, lt, ne)
-# $3 = version b
-vercmp() {
-    local _n1=(${1//./ }) _op=$2 _n2=(${3//./ }) _i _res
-
-    for ((_i=0; ; _i++))
-    do
-        if [[ ! ${_n1[_i]}${_n2[_i]} ]]; then _res=0
-        elif ((${_n1[_i]:-0} > ${_n2[_i]:-0})); then _res=1
-        elif ((${_n1[_i]:-0} < ${_n2[_i]:-0})); then _res=2
-        else continue
-        fi
-        break
-    done
-
-    case $_op in
-        gt) ((_res == 1));;
-        ge) ((_res != 2));;
-        eq) ((_res == 0));;
-        le) ((_res != 1));;
-        lt) ((_res == 2));;
-        ne) ((_res != 0));;
-    esac
-}
-
-# Create all subdirectories for given path without creating the last element.
-# $1 = path
-mksubdirs() {
-    [[ -e ${1%/*} ]] || mkdir -m 0755 -p -- "${1%/*}"
-}
-
-# Function prints global variables in format name=value line by line.
-# $@ = list of global variables' name
-print_vars() {
-    local _var _value
-
-    for _var in "$@"
-    do
-        eval printf -v _value "%s" \""\$$_var"\"
-        [[ ${_value} ]] && printf '%s="%s"\n' "$_var" "$_value"
-    done
-}
-
-# normalize_path <path>
-# Prints the normalized path, where it removes any duplicated
-# and trailing slashes.
-# Example:
-# $ normalize_path ///test/test//
-# /test/test
-normalize_path() {
-    shopt -q -s extglob
-    set -- "${1//+(\/)//}"
-    shopt -q -u extglob
-    printf "%s\n" "${1%/}"
-}
-
-# convert_abs_rel <from> <to>
-# Prints the relative path, when creating a symlink to <to> from <from>.
-# Example:
-# $ convert_abs_rel /usr/bin/test /bin/test-2
-# ../../bin/test-2
-# $ ln -s $(convert_abs_rel /usr/bin/test /bin/test-2) /usr/bin/test
-convert_abs_rel() {
-    local __current __absolute __abssize __cursize __newpath
-    local -i __i __level
-
-    set -- "$(normalize_path "$1")" "$(normalize_path "$2")"
-
-    # corner case #1 - self looping link
-    [[ "$1" == "$2" ]] && { printf "%s\n" "${1##*/}"; return; }
-
-    # corner case #2 - own dir link
-    [[ "${1%/*}" == "$2" ]] && { printf ".\n"; return; }
-
-    IFS="/" __current=($1)
-    IFS="/" __absolute=($2)
-
-    __abssize=${#__absolute[@]}
-    __cursize=${#__current[@]}
-
-    while [[ "${__absolute[__level]}" == "${__current[__level]}" ]]
-    do
-        (( __level++ ))
-        if (( __level > __abssize || __level > __cursize ))
-        then
-            break
-        fi
-    done
-
-    for ((__i = __level; __i < __cursize-1; __i++))
-    do
-        if ((__i > __level))
-        then
-            __newpath=$__newpath"/"
-        fi
-        __newpath=$__newpath".."
-    done
-
-    for ((__i = __level; __i < __abssize; __i++))
-    do
-        if [[ -n $__newpath ]]
-        then
-            __newpath=$__newpath"/"
-        fi
-        __newpath=$__newpath${__absolute[__i]}
-    done
-
-    printf "%s\n" "$__newpath"
-}
-
-
-# get_fs_env <device>
-# Get and the ID_FS_TYPE variable from udev for a device.
-# Example:
-# $ get_fs_env /dev/sda2
-# ext4
-get_fs_env() {
-    local evalstr
-    local found
-
-    [[ $1 ]] || return
-    unset ID_FS_TYPE
-    ID_FS_TYPE=$(blkid -u filesystem -o export -- "$1" \
-        | while read line || [ -n "$line" ]; do
-            if [[ "$line" == TYPE\=* ]]; then
-                printf "%s" "${line#TYPE=}";
-                exit 0;
-            fi
-            done)
-    if [[ $ID_FS_TYPE ]]; then
-        printf "%s" "$ID_FS_TYPE"
-        return 0
-    fi
-    return 1
-}
-
-# get_maj_min <device>
-# Prints the major and minor of a device node.
-# Example:
-# $ get_maj_min /dev/sda2
-# 8:2
-get_maj_min() {
-    local _maj _min _majmin
-    _majmin="$(stat -L -c '%t:%T' "$1" 2>/dev/null)"
-    printf "%s" "$((0x${_majmin%:*})):$((0x${_majmin#*:}))"
-}
-
-
-# get_devpath_block <device>
-# get the DEVPATH in /sys of a block device
-get_devpath_block() {
-    local _majmin _i
-    _majmin=$(get_maj_min "$1")
-
-    for _i in /sys/block/*/dev /sys/block/*/*/dev; do
-        [[ -e "$_i" ]] || continue
-        if [[ "$_majmin" == "$(<"$_i")" ]]; then
-            printf "%s" "${_i%/dev}"
-            return 0
-        fi
-    done
-    return 1
-}
-
-# get a persistent path from a device
-get_persistent_dev() {
-    local i _tmp _dev _pol
-
-    _dev=$(get_maj_min "$1")
-    [ -z "$_dev" ] && return
-
-    if [[ -n "$persistent_policy" ]]; then
-	_pol="/dev/disk/${persistent_policy}/*"
-    else
-	_pol=
-    fi
-
-    for i in \
-        $_pol \
-        /dev/mapper/* \
-        /dev/disk/by-uuid/* \
-        /dev/disk/by-label/* \
-        /dev/disk/by-partuuid/* \
-        /dev/disk/by-partlabel/* \
-        /dev/disk/by-id/* \
-        /dev/disk/by-path/* \
-        ; do
-        [[ -e "$i" ]] || continue
-        [[ $i == /dev/mapper/control ]] && continue
-        [[ $i == /dev/mapper/mpath* ]] && continue
-        _tmp=$(get_maj_min "$i")
-        if [ "$_tmp" = "$_dev" ]; then
-            printf -- "%s" "$i"
-            return
-        fi
-    done
-    printf -- "%s" "$1"
-}
-
-expand_persistent_dev() {
-    local _dev=$1
-
-    case "$_dev" in
-        LABEL=*)
-            _dev="/dev/disk/by-label/${_dev#LABEL=}"
-            ;;
-        UUID=*)
-            _dev="${_dev#UUID=}"
-            _dev="${_dev,,}"
-            _dev="/dev/disk/by-uuid/${_dev}"
-            ;;
-        PARTUUID=*)
-            _dev="${_dev#PARTUUID=}"
-            _dev="${_dev,,}"
-            _dev="/dev/disk/by-partuuid/${_dev}"
-            ;;
-        PARTLABEL=*)
-            _dev="/dev/disk/by-partlabel/${_dev#PARTLABEL=}"
-            ;;
-    esac
-    printf "%s" "$_dev"
-}
-
-shorten_persistent_dev() {
-    local _dev="$1"
-    case "$_dev" in
-        /dev/disk/by-uuid/*)
-            printf "%s" "UUID=${_dev##*/}";;
-        /dev/disk/by-label/*)
-            printf "%s" "LABEL=${_dev##*/}";;
-        /dev/disk/by-partuuid/*)
-            printf "%s" "PARTUUID=${_dev##*/}";;
-        /dev/disk/by-partlabel/*)
-            printf "%s" "PARTLABEL=${_dev##*/}";;
-        *)
-            printf "%s" "$_dev";;
-    esac
-}
-
-# find_block_device <mountpoint>
-# Prints the major and minor number of the block device
-# for a given mountpoint.
-# Unless $use_fstab is set to "yes" the functions
-# uses /proc/self/mountinfo as the primary source of the
-# information and only falls back to /etc/fstab, if the mountpoint
-# is not found there.
-# Example:
-# $ find_block_device /usr
-# 8:4
-find_block_device() {
-    local _dev _majmin _find_mpt
-    _find_mpt="$1"
-    if [[ $use_fstab != yes ]]; then
-        [[ -d $_find_mpt/. ]]
-        findmnt -e -v -n -o 'MAJ:MIN,SOURCE' --target "$_find_mpt" | { \
-            while read _majmin _dev || [ -n "$_dev" ]; do
-                if [[ -b $_dev ]]; then
-                    if ! [[ $_majmin ]] || [[ $_majmin == 0:* ]]; then
-                        _majmin=$(get_maj_min $_dev)
-                    fi
-                    if [[ $_majmin ]]; then
-                        printf "%s\n" "$_majmin"
-                    else
-                        printf "%s\n" "$_dev"
-                    fi
-                    return 0
-                fi
-                if [[ $_dev = *:* ]]; then
-                    printf "%s\n" "$_dev"
-                    return 0
-                fi
-            done; return 1; } && return 0
-    fi
-    # fall back to /etc/fstab
-
-    findmnt -e --fstab -v -n -o 'MAJ:MIN,SOURCE' --target "$_find_mpt" | { \
-        while read _majmin _dev || [ -n "$_dev" ]; do
-            if ! [[ $_dev ]]; then
-                _dev="$_majmin"
-                unset _majmin
-            fi
-            if [[ -b $_dev ]]; then
-                [[ $_majmin ]] || _majmin=$(get_maj_min $_dev)
-                if [[ $_majmin ]]; then
-                    printf "%s\n" "$_majmin"
-                else
-                    printf "%s\n" "$_dev"
-                fi
-                return 0
-            fi
-            if [[ $_dev = *:* ]]; then
-                printf "%s\n" "$_dev"
-                return 0
-            fi
-        done; return 1; } && return 0
-
-    return 1
-}
-
-# find_mp_fstype <mountpoint>
-# Echo the filesystem type for a given mountpoint.
-# /proc/self/mountinfo is taken as the primary source of information
-# and /etc/fstab is used as a fallback.
-# No newline is appended!
-# Example:
-# $ find_mp_fstype /;echo
-# ext4
-find_mp_fstype() {
-    local _fs
-
-    if [[ $use_fstab != yes ]]; then
-        findmnt -e -v -n -o 'FSTYPE' --target "$1" | { \
-            while read _fs || [ -n "$_fs" ]; do
-                [[ $_fs ]] || continue
-                [[ $_fs = "autofs" ]] && continue
-                printf "%s" "$_fs"
-                return 0
-            done; return 1; } && return 0
-    fi
-
-    findmnt --fstab -e -v -n -o 'FSTYPE' --target "$1" | { \
-        while read _fs || [ -n "$_fs" ]; do
-            [[ $_fs ]] || continue
-            [[ $_fs = "autofs" ]] && continue
-            printf "%s" "$_fs"
-            return 0
-        done; return 1; } && return 0
-
-    return 1
-}
-
-# find_dev_fstype <device>
-# Echo the filesystem type for a given device.
-# /proc/self/mountinfo is taken as the primary source of information
-# and /etc/fstab is used as a fallback.
-# No newline is appended!
-# Example:
-# $ find_dev_fstype /dev/sda2;echo
-# ext4
-find_dev_fstype() {
-    local _find_dev _fs
-    _find_dev="$1"
-    if ! [[ "$_find_dev" = /dev* ]]; then
-        [[ -b "/dev/block/$_find_dev" ]] && _find_dev="/dev/block/$_find_dev"
-    fi
-
-    if [[ $use_fstab != yes ]]; then
-        findmnt -e -v -n -o 'FSTYPE' --source "$_find_dev" | { \
-            while read _fs || [ -n "$_fs" ]; do
-                [[ $_fs ]] || continue
-                [[ $_fs = "autofs" ]] && continue
-                printf "%s" "$_fs"
-                return 0
-            done; return 1; } && return 0
-    fi
-
-    findmnt --fstab -e -v -n -o 'FSTYPE' --source "$_find_dev" | { \
-        while read _fs || [ -n "$_fs" ]; do
-            [[ $_fs ]] || continue
-            [[ $_fs = "autofs" ]] && continue
-            printf "%s" "$_fs"
-            return 0
-        done; return 1; } && return 0
-
-    return 1
-}
-
-# find_mp_fsopts <mountpoint>
-# Echo the filesystem options for a given mountpoint.
-# /proc/self/mountinfo is taken as the primary source of information
-# and /etc/fstab is used as a fallback.
-# No newline is appended!
-# Example:
-# $ find_mp_fsopts /;echo
-# rw,relatime,discard,data=ordered
-find_mp_fsopts() {
-    if [[ $use_fstab != yes ]]; then
-        findmnt -e -v -n -o 'OPTIONS' --target "$1" 2>/dev/null && return 0
-    fi
-
-    findmnt --fstab -e -v -n -o 'OPTIONS' --target "$1"
-}
-
-# find_dev_fsopts <device>
-# Echo the filesystem options for a given device.
-# /proc/self/mountinfo is taken as the primary source of information
-# and /etc/fstab is used as a fallback.
-# Example:
-# $ find_dev_fsopts /dev/sda2
-# rw,relatime,discard,data=ordered
-find_dev_fsopts() {
-    local _find_dev _opts
-    _find_dev="$1"
-    if ! [[ "$_find_dev" = /dev* ]]; then
-        [[ -b "/dev/block/$_find_dev" ]] && _find_dev="/dev/block/$_find_dev"
-    fi
-
-    if [[ $use_fstab != yes ]]; then
-        findmnt -e -v -n -o 'OPTIONS' --source "$_find_dev" 2>/dev/null && return 0
-    fi
-
-    findmnt --fstab -e -v -n -o 'OPTIONS' --source "$_find_dev"
-}
-
-
-# finds the major:minor of the block device backing the root filesystem.
-find_root_block_device() { find_block_device /; }
-
-# for_each_host_dev_fs <func>
-# Execute "<func> <dev> <filesystem>" for every "<dev> <fs>" pair found
-# in ${host_fs_types[@]}
-for_each_host_dev_fs()
-{
-    local _func="$1"
-    local _dev
-    local _ret=1
-
-    [[ "${#host_fs_types[@]}" ]] || return 2
-
-
-    for _dev in "${!host_fs_types[@]}"; do
-        $_func "$_dev" "${host_fs_types[$_dev]}" && _ret=0
-    done
-    return $_ret
-}
-
-host_fs_all()
-{
-    printf "%s\n" "${host_fs_types[@]}"
-}
-
-# Walk all the slave relationships for a given block device.
-# Stop when our helper function returns success
-# $1 = function to call on every found block device
-# $2 = block device in major:minor format
-check_block_and_slaves() {
-    local _x
-    [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry.
-    if ! lvm_internal_dev $2; then "$1" $2 && return; fi
-    check_vol_slaves "$@" && return 0
-    if [[ -f /sys/dev/block/$2/../dev ]] && [[ /sys/dev/block/$2/../subsystem -ef /sys/class/block ]]; then
-        check_block_and_slaves $1 $(<"/sys/dev/block/$2/../dev") && return 0
-    fi
-    [[ -d /sys/dev/block/$2/slaves ]] || return 1
-    for _x in /sys/dev/block/$2/slaves/*; do
-        [[ -f $_x/dev ]] || continue
-        [[ $_x/subsystem -ef /sys/class/block ]] || continue
-        check_block_and_slaves $1 $(<"$_x/dev") && return 0
-    done
-    return 1
-}
-
-check_block_and_slaves_all() {
-    local _x _ret=1
-    [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry.
-    if ! lvm_internal_dev $2 && "$1" $2; then
-        _ret=0
-    fi
-    check_vol_slaves_all "$@" && return 0
-    if [[ -f /sys/dev/block/$2/../dev ]] && [[ /sys/dev/block/$2/../subsystem -ef /sys/class/block ]]; then
-        check_block_and_slaves_all $1 $(<"/sys/dev/block/$2/../dev") && _ret=0
-    fi
-    [[ -d /sys/dev/block/$2/slaves ]] || return 1
-    for _x in /sys/dev/block/$2/slaves/*; do
-        [[ -f $_x/dev ]] || continue
-        [[ $_x/subsystem -ef /sys/class/block ]] || continue
-        check_block_and_slaves_all $1 $(<"$_x/dev") && _ret=0
-    done
-    return $_ret
-}
-# for_each_host_dev_and_slaves <func>
-# Execute "<func> <dev>" for every "<dev>" found
-# in ${host_devs[@]} and their slaves
-for_each_host_dev_and_slaves_all()
-{
-    local _func="$1"
-    local _dev
-    local _ret=1
-
-    [[ "${host_devs[@]}" ]] || return 2
-
-    for _dev in "${host_devs[@]}"; do
-        [[ -b "$_dev" ]] || continue
-        if check_block_and_slaves_all $_func $(get_maj_min $_dev); then
-            _ret=0
-        fi
-    done
-    return $_ret
-}
-
-for_each_host_dev_and_slaves()
-{
-    local _func="$1"
-    local _dev
-
-    [[ "${host_devs[@]}" ]] || return 2
-
-    for _dev in "${host_devs[@]}"; do
-        [[ -b "$_dev" ]] || continue
-        check_block_and_slaves $_func $(get_maj_min $_dev) && return 0
-    done
-    return 1
-}
-
-# ugly workaround for the lvm design
-# There is no volume group device,
-# so, there are no slave devices for volume groups.
-# Logical volumes only have the slave devices they really live on,
-# but you cannot create the logical volume without the volume group.
-# And the volume group might be bigger than the devices the LV needs.
-check_vol_slaves() {
-    local _lv _vg _pv _dm _majmin
-    _majmin="$2"
-    _lv="/dev/block/$_majmin"
-    _dm=/sys/dev/block/$_majmin/dm
-    [[ -f $_dm/uuid  && $(<$_dm/uuid) =~ LVM-* ]] || return 1
-    _vg=$(dmsetup splitname --noheadings -o vg_name $(<"$_dm/name") )
-    # strip space
-    _vg="${_vg//[[:space:]]/}"
-    if [[ $_vg ]]; then
-        for _pv in $(lvm vgs --noheadings -o pv_name "$_vg" 2>/dev/null)
-        do
-            check_block_and_slaves $1 $(get_maj_min $_pv) && return 0
-        done
-    fi
-    return 1
-}
-
-check_vol_slaves_all() {
-    local _lv _vg _pv _majmin
-    _majmin="$2"
-    _lv="/dev/block/$_majmin"
-    _dm="/sys/dev/block/$_majmin/dm"
-    [[ -f $_dm/uuid  && $(<$_dm/uuid) =~ LVM-* ]] || return 1
-    _vg=$(dmsetup splitname --noheadings -o vg_name $(<"$_dm/name") )
-    # strip space
-    _vg="${_vg//[[:space:]]/}"
-    if [[ $_vg ]]; then
-        for _pv in $(lvm vgs --noheadings -o pv_name "$_vg" 2>/dev/null)
-        do
-            check_block_and_slaves_all $1 $(get_maj_min $_pv)
-        done
-        return 0
-    fi
-    return 1
-}
-
-
-
-# fs_get_option <filesystem options> <search for option>
-# search for a specific option in a bunch of filesystem options
-# and return the value
-fs_get_option() {
-    local _fsopts=$1
-    local _option=$2
-    local OLDIFS="$IFS"
-    IFS=,
-    set -- $_fsopts
-    IFS="$OLDIFS"
-    while [ $# -gt 0 ]; do
-        case $1 in
-            $_option=*)
-                echo ${1#${_option}=}
-                break
-        esac
-        shift
-    done
-}
-
-check_kernel_config()
-{
-    local _config_opt="$1"
-    local _config_file
-    [[ -f /boot/config-$kernel ]] \
-        && _config_file="/boot/config-$kernel"
-    [[ -f /lib/modules/$kernel/config ]] \
-        && _config_file="/lib/modules/$kernel/config"
-
-    # no kernel config file, so return true
-    [[ $_config_file ]] || return 0
-
-    grep -q -F "${_config_opt}=" "$_config_file" && return 0
-    return 1
-}
-
-
-# get_cpu_vendor
-# Only two values are returned: AMD or Intel
-get_cpu_vendor ()
-{
-    if grep -qE AMD /proc/cpuinfo; then
-        printf "AMD"
-    fi
-    if grep -qE Intel /proc/cpuinfo; then
-        printf "Intel"
-    fi
-}
-
-# get_host_ucode
-# Get the hosts' ucode file based on the /proc/cpuinfo
-get_ucode_file ()
-{
-    local family=`grep -E "cpu family" /proc/cpuinfo | head -1 | sed s/.*:\ //`
-    local model=`grep -E "model" /proc/cpuinfo |grep -v name | head -1 | sed s/.*:\ //`
-    local stepping=`grep -E "stepping" /proc/cpuinfo | head -1 | sed s/.*:\ //`
-
-    if [[ "$(get_cpu_vendor)" == "AMD" ]]; then
-        if [[ $family -ge 21 ]]; then
-            printf "microcode_amd_fam%xh.bin" $family
-        else
-            printf "microcode_amd.bin"
-        fi
-    fi
-    if [[ "$(get_cpu_vendor)" == "Intel" ]]; then
-        # The /proc/cpuinfo are in decimal.
-        printf "%02x-%02x-%02x" ${family} ${model} ${stepping}
-    fi
-}
-
-# Get currently loaded modules
-# sorted, and delimited by newline
-get_loaded_kernel_modules ()
-{
-    local modules=( )
-    while read _module _size _used _used_by; do
-        modules+=( "$_module" )
-    done <<< "$(lsmod | sed -n '1!p')"
-    printf '%s\n' "${modules[@]}" | sort
-}
-
-# Not every device in /dev/mapper should be examined.
-# If it is an LVM device, touch only devices which have /dev/VG/LV symlink.
-lvm_internal_dev() {
-    local dev_dm_dir=/sys/dev/block/$1/dm
-    [[ ! -f $dev_dm_dir/uuid || $(<$dev_dm_dir/uuid) != LVM-* ]] && return 1 # Not an LVM device
-    local DM_VG_NAME DM_LV_NAME DM_LV_LAYER
-    eval $(dmsetup splitname --nameprefixes --noheadings --rows "$(<$dev_dm_dir/name)" 2>/dev/null)
-    [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 0 # Better skip this!
-    [[ ${DM_LV_LAYER} ]] || [[ ! -L /dev/${DM_VG_NAME}/${DM_LV_NAME} ]]
-}
-
-btrfs_devs() {
-    local _mp="$1"
-    btrfs device usage "$_mp" \
-        | while read _dev _rest; do
-        str_starts "$_dev" "/" || continue
-        _dev=${_dev%,}
-        printf -- "%s\n" "$_dev"
-        done
-}

dracut-gencmdline

@@ -0,0 +1,715 @@
+#!/bin/bash --norc
+#
+# Copyright 2005-2009 Red Hat, Inc.  All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# code taken from mkinitrd
+#
+#. /usr/libexec/initrd-functions
+
+IF_verbose=""
+function set_verbose() {
+    case $1 in
+        1|true|yes|on)
+            IF_verbose="-v"
+            ;;
+        0|false|no|off)
+            IF_verbose=""
+            ;;
+    esac
+}
+
+function is_verbose() {
+    [ -n "$IF_verbose" ] && return 0
+    return 1
+}
+
+function get_verbose() {
+    echo "$IF_verbose"
+    is_verbose
+}
+
+
+function get_numeric_dev() {
+(
+    fmt="%d:%d"
+    if [ "$1" == "hex" ]; then
+        fmt="%x:%x"
+    fi
+    ls -lH "$2" | awk '{ sub(/,/, "", $5); printf("'"$fmt"'", $5, $6); }'
+) 2>/dev/null
+}
+
+
+function error() {
+    echo "$@" >&2
+}
+
+function vecho() {
+    is_verbose && echo "$@"
+}
+
+# module dep finding and installation functions
+moduledep() {
+    MPARGS=""
+    if [ "$1" == "--ignore-install" ]; then
+        MPARGS="$MPARGS --ignore-install"
+        shift
+    fi
+    vecho -n "Looking for deps of module $1"
+    deps=""
+    deps=$(modprobe $MPARGS --set-version $kernel --show-depends $1 2>/dev/null| awk '/^insmod / { print gensub(".*/","","g",$2) }' | while read foo ; do [ "${foo%%.ko}" != "$1" ] && echo -n "${foo%%.ko} " ; done)
+    [ -n "$deps" ] && vecho ": $deps" || vecho
+}
+
+export MALLOC_PERTURB_=204
+
+PATH=/sbin:/usr/sbin:/bin:/usr/bin:$PATH
+export PATH
+
+# Set the umask. For iscsi, the initrd can contain plaintext
+# password (chap secret), so only allow read by owner.
+umask 077
+
+VERSION=6.0.87
+
+PROBE="yes"
+MODULES=""
+GRAPHICSMODS=""
+PREMODS=""
+DMRAIDS=""
+ncryptodevs=0
+ncryptoparts=0
+ncryptolvs=0
+ncryptoraids=0
+root=""
+scsi_wait_scan="no"
+
+NET_LIST=""
+LD_SO_CONF=/etc/ld.so.conf
+LD_SO_CONF_D=/etc/ld.so.conf.d/
+
+[ -e /etc/sysconfig/mkinitrd ] && . /etc/sysconfig/mkinitrd
+
+CONFMODS="$MODULES"
+MODULES=""
+ARCH=$(uname -m | sed -e 's/s390x/s390/')
+
+compress=1
+allowmissing=""
+target=""
+kernel=""
+force=""
+img_vers=""
+builtins=""
+modulefile=/etc/modules.conf
+[ "$ARCH" != "s390" ] && withusb=1
+rc=0
+nolvm=""
+nodmraid=""
+
+IMAGESIZE=8000
+PRESCSIMODS=""
+fstab="/etc/fstab"
+
+vg_list=""
+net_list="$NET_LIST"
+
+usage () {
+    if [ "$1" == "-n" ]; then
+        cmd=echo
+    else
+        cmd=error
+    fi
+
+    $cmd "usage: `basename $0` [--version] [--help] [-v] [-f]"
+
+    if [ "$1" == "-n" ]; then
+        exit 0
+    else
+        exit 1
+    fi
+}
+
+
+qpushd() {
+    pushd "$1" >/dev/null 2>&1
+}
+
+qpopd() {
+    popd >/dev/null 2>&1
+}
+
+
+freadlink() {
+    readlink -f "$1"
+}
+
+resolve_device_name() {
+    if [ -z "${1##UUID=*}" ]; then
+        real=$(freadlink /dev/disk/by-uuid/${1##UUID=})
+        [ -b $real ] && { echo $real; return; }
+    fi
+    if [ -z "${1##LABEL=*}" ]; then
+        real=$(freadlink /dev/disk/by-label/${1##LABEL=})
+        [ -b $real ] && { echo $real; return; }
+    fi
+    echo "$1" 
+}
+
+finddevnoinsys() {
+    majmin="$1"
+    if [ -n "$majmin" ]; then
+        dev=$(for x in /sys/block/* ; do find $x/ -name dev ; done | while read device ; do \
+              echo "$majmin" | cmp -s $device && echo $device ; done)
+        if [ -n "$dev" ]; then
+            dev=${dev%%/dev}
+            dev=${dev%%/}
+            echo "$dev"
+            return 0
+        fi
+    fi
+    return 1
+}
+
+finddevicedriverinsys () {
+    if is_iscsi $PWD; then
+        handleiscsi "$PWD"
+        return
+    fi
+    while [ "$PWD" != "/sys/devices" ]; do
+        deps=
+        if [ -f modalias ]; then
+            MODALIAS=$(cat modalias)
+            if [ "${MODALIAS::7}" == "scsi:t-" ]; then
+                scsi_wait_scan=yes
+            fi
+            moduledep $MODALIAS
+            unset MODALIAS
+        fi
+
+        cd ..
+    done
+}
+
+findstoragedriverinsys () {
+    local sysfs=$(freadlink "$1")
+
+    # if its a partition look at the device holding the partition
+    if [ -f "$sysfs/start" ]; then
+        sysfs=$(freadlink ${sysfs%/*})
+    fi
+
+    if [[ ! "$sysfs" =~ ^/sys/.*block/.*$ ]]; then
+        #error "WARNING: $sysfs is a not a block sysfs path, skipping"
+        return
+    fi
+
+    case " $handleddevices " in
+        *" $sysfs "*)
+            return ;;
+        *) handleddevices="$handleddevices $sysfs" ;;
+    esac
+
+    if [[ "$sysfs" =~ ^/sys/.*block/md[0-9]+$ ]]; then
+        local raid=${sysfs##*/}
+        vecho "Found MDRAID component $raid"
+        handleraid $raid
+    fi
+    if [[ "$sysfs" =~ ^/sys/.*block/dm-[0-9]+$ ]]; then
+        vecho "Found DeviceMapper component ${sysfs##*/}"
+        handledm $(cat $sysfs/dev |cut -d : -f 1) $(cat $sysfs/dev |cut -d : -f 2)
+    fi
+
+    for slave in $(ls -d "$sysfs"/slaves/* 2>/dev/null) ; do
+        findstoragedriverinsys "$slave"
+    done
+
+    if [ -L "$sysfs/device" ]; then
+        qpushd $(freadlink "$sysfs/device")
+        finddevicedriverinsys
+        qpopd
+    fi
+}
+
+findstoragedriver () {
+    local device="$1"
+
+    if [ ! -b "$device" ]; then
+        #error "WARNING: $device is a not a block device, skipping"
+        return
+    fi
+
+    local majmin=$(get_numeric_dev dec "$device")
+    local sysfs=$(finddevnoinsys "$majmin")
+
+    if [ -z "$sysfs" ]; then
+        #error "WARNING: $device major:minor $majmin not found, skipping"
+        return
+    fi
+
+    vecho "Looking for driver for $device in $sysfs"
+    findstoragedriverinsys "$sysfs"
+}
+
+iscsi_get_rec_val() {
+
+    # The open-iscsi 742 release changed to using flat files in
+    # /var/lib/iscsi.
+
+    result=$(grep "^${2} = " "$1" |  sed -e s'/.* = //')
+}
+
+iscsi_set_parameters() {
+    path=$1
+    vecho setting iscsi parameters
+
+    tmpfile=$(mktemp)
+
+    # Check once before getting explicit values, so we can output a decent
+    # error message.
+    /sbin/iscsiadm --show -m session -r $path > $tmpfile
+    if [ ! -s $tmpfile ]; then
+        echo Unable to find iscsi record for $path
+        exit 1
+    fi
+
+    nit_name=$(grep "^InitiatorName=" /etc/iscsi/initiatorname.iscsi | \
+        sed -e "s/^InitiatorName=//")
+
+    iscsi_get_rec_val $tmpfile "node.name"
+    tgt_name=${result}
+    iscsi_get_rec_val $tmpfile "node.tpgt"
+    tpgt=${result}
+    # iscsistart wants node.conn[0].address / port
+    iscsi_get_rec_val $tmpfile 'node.conn\[0\].address'
+    tgt_ipaddr=${result}
+    iscsi_get_rec_val $tmpfile 'node.conn\[0\].port'
+    tgt_port=${result}
+
+    # Note: we get chap secrets (passwords) in plaintext, and also store
+    # them in the initrd.
+
+    iscsi_get_rec_val $tmpfile "node.session.auth.username"
+    chap=${result}
+    if [ -n "${chap}" -a "${chap}" != "<empty>" ]; then
+        chap="-u ${chap}"
+        iscsi_get_rec_val $tmpfile "node.session.auth.password" 
+        chap_pw="-w ${result}"
+    else
+	chap=""
+    fi
+
+    iscsi_get_rec_val $tmpfile "node.session.auth.username_in"
+    chap_in=${result}
+    if [ -n "${chap_in}" -a "${chap_in}" != "<empty>" ]; then
+        chap_in="-U ${chap_in}"
+        iscsi_get_rec_val $tmpfile "node.session.auth.password_in" 
+        chap_in_pw="-W ${result}"
+    else
+	chap_in=""
+    fi
+
+    rm $tmpfile
+}
+
+emit_iscsi () {
+    if [ -n "${iscsi_devs}" ]; then
+        for dev in ${iscsi_devs}; do
+            iscsi_set_parameters $dev
+            # recid is not really used, just use 0 for it
+            echo "/bin/iscsistart -t ${tgt_name} -i ${nit_name} \
+                -g ${tpgt} -a ${tgt_ipaddr} ${chap} ${chap_pw} \
+                ${chap_in} ${chap_in_pw}"
+        done
+    fi
+}
+
+is_iscsi() {
+    path=$1
+    if echo $path | grep -q "/platform/host[0-9]*/session[0-9]*/target[0-9]*:[0-9]*:[0-9]*/[0-9]*:[0-9]*:[0-9]*:[0-9]*"; then
+        return 0
+    else 
+        return 1
+    fi
+}
+
+handledm() {
+    major=$1
+    minor=$2
+    while read dmstart dmend dmtype r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 ; do
+        case "$dmtype" in
+            crypt)
+                # this device is encrypted; find the slave device and see
+                # whether the encryption is LUKS; if not, bail.
+                slavedev=$(finddevnoinsys $r3)
+                # get the basename, then s,!,/, in case it's a cciss device
+                slavedev=$(echo ${slavedev##*/} | tr '!' '/')
+                cryptsetup isLuks "/dev/$slavedev" 2>/dev/null || continue
+                find_base_dm_mods
+                dmname=$(dmsetup info -j $major -m $minor -c --noheadings -o name)
+                # do the device resolution dance to get /dev/mapper/foo
+                # since 'lvm lvs' doesn't like dm-X device nodes
+                if [[ "$slavedev" =~ ^dm- ]]; then
+                    majmin=$(get_numeric_dev dec "/dev/$slavedev")
+                    for dmdev in /dev/mapper/* ; do
+                        dmnum=$(get_numeric_dev dev $dmdev)
+                        if [ $dmnum = $majmin ]; then
+                            slavedev=${dmdev#/dev/}
+                            break
+                        fi
+                    done
+                fi
+
+                # determine if $slavedev is an LV
+                #  if so, add the device to latecryptodevs
+                #  if not, add the device to cryptodevs
+                local vg=$(lvshow /dev/$slavedev)
+                if [ -n "$vg" ]; then
+                    eval cryptolv${ncryptolvs}='"'/dev/$slavedev $dmname'"'
+                    let ncryptolvs++
+                elif grep -q "^$slavedev :" /proc/mdstat ; then
+                    eval cryptoraid${ncryptoraids}='"'/dev/$slavedev $dmname'"'
+                    let ncryptoraids++
+                else
+                    eval cryptoparts${ncryptoparts}='"'/dev/$slavedev $dmname'"'
+                    let ncryptoparts++
+                fi
+
+                let ncryptodevs++
+                findstoragedriver "/dev/$slavedev"
+                ;;
+        esac
+    done << EOF
+        $(dmsetup table -j $major -m $minor 2>/dev/null)
+EOF
+    local name=$(dmsetup info --noheadings -c -j $major -m $minor -o name)
+    local vg=$(lvshow "/dev/mapper/$name")
+    local raids=$(/sbin/dmraid -s -craidname 2>/dev/null | grep -vi "no raid disks") 
+    if [ -n "$vg" ]; then
+        vg=`echo $vg` # strip whitespace
+        case " $vg_list " in
+        *" $vg "*) ;;
+        *)  vg_list="$vg_list $vg"
+            [ -z "$nolvm" ] && find_base_dm_mods
+            ;;
+        esac
+    fi
+    for raid in $raids ; do
+        if [ "$raid" == "$name" ]; then
+            case " $DMRAIDS " in
+                *" $raid "*) ;;
+                *)  DMRAIDS="$DMRAIDS $raid"
+                    [ -z "$nodmraid" ] && find_base_dm_mods
+                    ;;
+            esac
+            break
+        fi
+    done
+}
+
+handleiscsi() {
+    vecho "Found iscsi component $1"
+
+    # We call iscsi_set_parameters once here to figure out what network to
+    # use (it sets tgt_ipaddr), and once again to emit iscsi values,
+    # not very efficient.
+    iscsi_set_parameters $1
+    iscsi_devs="$iscsi_devs $1"
+    netdev=$(/sbin/ip route get to $tgt_ipaddr | \
+        sed 's|.*dev \(.*\).*|\1|g' | awk '{ print $1; exit }')
+    addnetdev $netdev
+}
+
+handleraid() {
+    local start=0
+
+    if [ -n "$noraid" -o ! -f /proc/mdstat ]; then
+        return 0
+    fi
+
+    levels=$(awk "/^$1[	 ]*:/ { print\$4 }" /proc/mdstat)
+
+    for level in $levels ; do
+        case $level in
+        linear)
+            start=1
+            ;;
+        multipath)
+            start=1
+            ;;
+        raid[01] | raid10)
+            start=1
+            ;;
+        raid[456])
+            start=1
+            ;;
+        *)
+            error "raid level $level (in /proc/mdstat) not recognized"
+            ;;
+        esac
+    done
+    if [ "$start" = 1 ]; then
+        raiddevices="$raiddevices $1"
+    fi
+    return $start
+}
+
+lvshow() {
+    lvm lvs --ignorelockingfailure --noheadings -o vg_name \
+        $1 2>/dev/null | egrep -v '^ *(WARNING:|Volume Groups with)'
+}
+
+vgdisplay() {
+    lvm vgdisplay --ignorelockingfailure -v $1 2>/dev/null |
+        sed -n 's/PV Name//p'
+}
+
+dmmods_found="n"
+find_base_dm_mods()
+{
+    [ "$dmmods_found" == "n" ] || return
+    dmmods_found="y"
+}
+
+savedargs=$*
+while [ $# -gt 0 ]; do
+    case $1 in
+        --fstab*)
+            if [ "$1" != "${1##--fstab=}" ]; then
+                fstab=${1##--fstab=}
+            else
+                fstab=$2
+                shift
+            fi
+            ;;
+
+
+        -v|--verbose)
+            set_verbose true
+            ;;
+        --net-dev*)
+            if [ "$1" != "${1##--net-dev=}" ]; then
+                net_list="$net_list ${1##--net-dev=}"
+            else
+                net_list="$net_list $2"
+                shift
+            fi
+            ;;
+	--rootdev*)
+            if [ "$1" != "${1##--rootdev=}" ]; then
+                rootdev="${1##--rootdev=}"
+            else
+                rootdev="$2"
+                shift
+            fi
+	    ;;
+	--thawdev*)
+            if [ "$1" != "${1##--thawdev=}" ]; then
+                thawdev="${1##--thawdev=}"
+            else
+                thawdev="$2"
+                shift
+            fi
+	    ;;
+	--rootfs*)
+            if [ "$1" != "${1##--rootfs=}" ]; then
+                rootfs="${1##--rootfs=}"
+            else
+                rootfs="$2"
+                shift
+            fi
+	    ;;
+	--rootopts*)
+            if [ "$1" != "${1##--rootopts=}" ]; then
+                rootopts="${1##--rootopts=}"
+            else
+                rootopts="$2"
+                shift
+            fi
+	    ;;
+	--root*)
+            if [ "$1" != "${1##--root=}" ]; then
+                root="${1##--root=}"
+            else
+                root="$2"
+                shift
+            fi
+	    ;;
+	--loopdev*)
+            if [ "$1" != "${1##--loopdev=}" ]; then
+                loopdev="${1##--loopdev=}"
+            else
+                loopdev="$2"
+                shift
+            fi
+	    ;;
+	--loopfs*)
+            if [ "$1" != "${1##--loopfs=}" ]; then
+                loopfs="${1##--loopfs=}"
+            else
+                loopfs="$2"
+                shift
+            fi
+	    ;;
+	--loopopts*)
+            if [ "$1" != "${1##--loopopts=}" ]; then
+                loopopts="${1##--loopopts=}"
+            else
+                loopopts="$2"
+                shift
+            fi
+	    ;;
+	--looppath*)
+            if [ "$1" != "${1##--looppath=}" ]; then
+                looppath="${1##--looppath=}"
+            else
+                looppath="$2"
+                shift
+            fi
+	    ;;
+        --help)
+            usage -n
+            ;;
+        *)
+            if [ -z "$target" ]; then
+                target=$1
+            elif [ -z "$kernel" ]; then
+                kernel=$1
+            else
+                usage
+            fi
+            ;;
+    esac
+
+    shift
+done
+
+    [ -z "$rootfs" ] && rootfs=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $3; }}' $fstab)
+    [ -z "$rootopts" ] && rootopts=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $4; }}' $fstab)
+    [ -z "$rootopts" ] && rootopts="defaults"
+
+
+    [ -z "$rootdev" ] && rootdev=$(awk '/^[ \t]*[^#]/ { if ($2 == "/") { print $1; }}' $fstab)
+    # check if it's nfsroot
+    physdev=""
+    if [ "$rootfs" == "nfs" ]; then
+        if [ "x$net_list" == "x" ]; then
+            handlenfs $rootdev
+        fi
+    else
+        # check if it's root by label
+        rdev=$rootdev
+        rdev=$(resolve_device_name "$rdev")
+        rootopts=$(echo $rootopts | sed -e 's/^r[ow],//' -e 's/,_netdev//' -e 's/_netdev//' -e 's/,r[ow],$//' -e 's/,r[ow],/,/' -e 's/^r[ow]$/defaults/' -e 's/$/,ro/')
+        findstoragedriver "$rdev"
+    fi
+
+    # find the first swap dev which would get used for swsusp
+    [ -z "$thawdev" ] && thawdev=$(awk '/^[ \t]*[^#]/ { if ($3 == "swap") { print $1; exit }}' $fstab)
+    swsuspdev="$thawdev"
+    if [ -n "$swsuspdev" ]; then
+        swsuspdev=$(resolve_device_name "$swsuspdev")
+	findstoragedriver "$swsuspdev"
+    fi
+
+
+cemit()
+{
+    cat 
+}
+
+emit()
+{
+    NONL=""
+    if [ "$1" == "-n" ]; then
+        NONL="-n"
+        shift
+    fi
+    echo $NONL "$@" 
+}
+
+emitdmraids()
+{
+    if [ -z "$nodmraid" -a -n "$DMRAIDS" ]; then
+        for raid in $DMRAIDS; do
+            echo -n "rd_DM_UUID=$raid "
+        done
+    fi
+}
+
+
+# HACK: module loading + device creation isn't necessarily synchronous...
+# this will make sure that we have all of our devices before trying
+# things like RAID or LVM
+emitdmraids
+
+emitcrypto()
+{
+    local luksuuid=$(grep "^$2 " /etc/crypttab 2>/dev/null| awk '{ print $2 }')
+    if [ -z "$luksuuid" ]; then
+        luksuuid="$2"
+    fi
+    luksuuid=${luksuuid##UUID=}
+    echo -n "rd_LUKS_UUID=$luksuuid "
+}
+
+if [ -n "$raiddevices" ]; then
+    for dev in $raiddevices; do
+        uid=$(udevadm info --query=env --name /dev/${dev}|grep MD_UUID)
+        uid=${uid##MD_UUID=}
+        [ -n "$uid" ] && echo -n "rd_MD_UUID=$uid "
+    done
+else
+    echo -n "rd_NO_MD "
+fi
+
+if [ -z "$nolvm" -a -n "$vg_list" ]; then    
+    for vg in $vg_list; do 
+	echo -n "rd_LVM_VG=$vg "
+    done
+else
+    echo -n "rd_NO_LVM "
+fi
+
+cryptdevs="$(echo ${!cryptoraid@} ${!cryptopart@} ${!cryptolv@})"
+
+if [ -z "$cryptdevs" ]; then
+    echo -n "rd_NO_LUKS "
+else
+    for cryptdev in ${!cryptoraid@} ${!cryptopart@} ${!cryptolv@} ; do
+        emitcrypto `eval echo '$'$cryptdev`
+    done
+fi
+
+# output local keyboard/18n settings
+[ -e /etc/sysconfig/keyboard ] && . /etc/sysconfig/keyboard
+[ -e /etc/sysconfig/i18n ] && . /etc/sysconfig/i18n
+
+for i in KEYTABLE SYSFONT SYSFONTACM UNIMAP LANG; do
+    val=$(eval echo \$$i)
+    [[ $val ]] && echo -n "$i=$val "
+done
+
+if [ -n "$KEYBOARDTYPE" -a "$KEYBOARDTYPE" != "pc" ]; then
+    echo -n "KEYBOARDTYPE=$KEYBOARDTYPE "
+fi
+
+if [ -n "$rootdev" ]; then
+    echo -n "root=$rootdev "
+fi
+
+echo
+# vim:ts=8:sw=4:sts=4:et

dracut-gencmdline.8

@@ -0,0 +1,20 @@
+.TH DRACUT-GENCMDLINE 8 "June 2009" "Linux"
+.SH NAME
+dracut-gencmdline \- generates kernel command line parameters for the dracut generated initramfs
+.SH SYNOPSIS
+.BR dracut-gencmdline
+
+.SH DESCRIPTION
+.B dracut-gencmdline
+generates kernel command line parameters for the dracut generated initramfs, which are very specific to the host system.
+
+.SH AUTHORS
+.nf
+Harald Hoyer <harald@redhat.com>
+.fi
+.SH AVAILABILITY
+The dracut-gencmdline command is part of the dracut package and is available from
+http://sourceforge.net/apps/trac/dracut/wiki
+
+.SH SEE ALSO
+.BR dracut (8)

dracut-initramfs-restore.sh

@@ -1,43 +0,0 @@
-#!/bin/bash
-
-set -e
-
-# do some sanity checks first
-[ -e /run/initramfs/bin/sh ] && exit 0
-[ -e /run/initramfs/.need_shutdown ] || exit 0
-
-KERNEL_VERSION="$(uname -r)"
-
-[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
-SKIP="$dracutbasedir/skipcpio"
-[[ -x $SKIP ]] || SKIP=cat
-
-[[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
-
-mount -o ro /boot &>/dev/null || true
-
-if [[ $MACHINE_ID ]] && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
-    IMG="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
-fi
-[[ -f $IMG ]] || IMG="/boot/initramfs-${KERNEL_VERSION}.img"
-
-cd /run/initramfs
-
-[ -f .need_shutdown -a -f "$IMG" ] || exit 1
-
-if $SKIP "$IMG" | zcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then
-    rm -f -- .need_shutdown
-elif $SKIP "$IMG" | xzcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then
-    rm -f -- .need_shutdown
-elif $SKIP "$IMG" | lz4 -d -c | cpio -id --no-absolute-filenames --quiet >/dev/null; then
-    rm -f -- .need_shutdown
-elif $SKIP "$IMG" | zstd -d -c | cpio -id --no-absolute-filenames --quiet >/dev/null; then
-    rm -f -- .need_shutdown
-else
-    # something failed, so we clean up
-    echo "Unpacking of $IMG to /run/initramfs failed" >&2
-    rm -f -- /run/initramfs/shutdown
-    exit 1
-fi
-
-exit 0

dracut-logger.sh

@@ -1,441 +0,0 @@
-#!/bin/bash
-#
-# logging faciality module for dracut both at build- and boot-time
-#
-# Copyright 2010 Amadeusz Żołnowski <aidecoe@aidecoe.name>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-
-__DRACUT_LOGGER__=1
-
-
-## @brief Logging facility module for dracut both at build- and boot-time.
-#
-# @section intro Introduction
-#
-# The logger takes a bit from Log4j philosophy. There are defined 6 logging
-# levels:
-#   - TRACE (6)
-#     The TRACE Level designates finer-grained informational events than the
-#     DEBUG.
-#   - DEBUG (5)
-#     The DEBUG Level designates fine-grained informational events that are most
-#     useful to debug an application.
-#   - INFO (4)
-#     The INFO level designates informational messages that highlight the
-#     progress of the application at coarse-grained level.
-#   - WARN (3)
-#     The WARN level designates potentially harmful situations.
-#   - ERROR (2)
-#     The ERROR level designates error events that might still allow the
-#     application to continue running.
-#   - FATAL (1)
-#     The FATAL level designates very severe error events that will presumably
-#     lead the application to abort.
-# Descriptions are borrowed from Log4j documentation:
-# http://logging.apache.org/log4j/1.2/apidocs/org/apache/log4j/Level.html
-#
-# @section usage Usage
-#
-# First of all you have to start with dlog_init() function which initializes
-# required variables. Don't call any other logging function before that one!
-# If you're ready with this, you can use following functions which corresponds
-# clearly to levels listed in @ref intro Introduction. Here they are:
-#   - dtrace()
-#   - ddebug()
-#   - dinfo()
-#   - dwarn()
-#   - derror()
-#   - dfatal()
-# They take all arguments given as a single message to be logged. See dlog()
-# function for details how it works. Note that you shouldn't use dlog() by
-# yourself. It's wrapped with above functions.
-#
-# @see dlog_init() dlog()
-#
-# @section conf Configuration
-#
-# Logging is controlled by following global variables:
-#   - @var stdloglvl - logging level to standard error (console output)
-#   - @var sysloglvl - logging level to syslog (by logger command)
-#   - @var fileloglvl - logging level to file
-#   - @var kmsgloglvl - logging level to /dev/kmsg (only for boot-time)
-#   - @var logfile - log file which is used when @var fileloglvl is higher
-#   than 0
-# and two global variables: @var maxloglvl and @var syslogfacility which <b>must
-# not</b> be overwritten. Both are set by dlog_init(). @var maxloglvl holds
-# maximum logging level of those three and indicates that dlog_init() was run.
-# @var syslogfacility is set either to 'user' (when building initramfs) or
-# 'daemon' (when booting).
-#
-# Logging level set by the variable means that messages from this logging level
-# and above (FATAL is the highest) will be shown. Logging levels may be set
-# independently for each destination (stderr, syslog, file, kmsg).
-#
-# @see dlog_init()
-
-
-## @brief Initializes dracut Logger.
-#
-# @retval 1 if something has gone wrong
-# @retval 0 on success.
-#
-# @note This function need to be called before any other from this file.
-#
-# If any of the variables is not set, this function set it to default:
-#   - @var stdloglvl = 4 (info)
-#   - @var sysloglvl = 0 (no logging)
-#   - @var fileloglvl is set to 4 when @var logfile is set too, otherwise it's
-#   - @var kmsgloglvl = 0 (no logging)
-#   set to 0
-#
-# @warning Function sets global variables @var maxloglvl and @syslogfacility.
-# See file doc comment for details.
-dlog_init() {
-    local __oldumask
-    local ret=0; local errmsg
-    [ -z "$stdloglvl" ] && stdloglvl=4
-    [ -z "$sysloglvl" ] && sysloglvl=0
-    [ -z "$kmsgloglvl" ] && kmsgloglvl=0
-    # Skip initialization if it's already done.
-    [ -n "$maxloglvl" ] && return 0
-
-    if [ -z "$fileloglvl" ]; then
-        [ -w "$logfile" ] && fileloglvl=4 || fileloglvl=0
-    elif (( $fileloglvl > 0 )); then
-        if [[ $logfile ]]; then
-            __oldumask=$(umask)
-            umask 0377
-            ! [ -e "$logfile" ] && >"$logfile"
-            umask $__oldumask
-            if [ -w "$logfile" -a -f "$logfile" ]; then
-            # Mark new run in the log file
-                echo >>"$logfile"
-                if command -v date >/dev/null; then
-                    echo "=== $(date) ===" >>"$logfile"
-                else
-                    echo "===============================================" >>"$logfile"
-                fi
-                echo >>"$logfile"
-            else
-            # We cannot log to file, so turn this facility off.
-                fileloglvl=0
-                ret=1
-                errmsg="'$logfile' is not a writable file"
-            fi
-        fi
-    fi
-
-    if (( $UID  != 0 )); then
-        kmsgloglvl=0
-        sysloglvl=0
-    fi
-
-    if (( $sysloglvl > 0 )); then
-        if [[ -d /run/systemd/journal ]] \
-            && type -P systemd-cat &>/dev/null \
-            && systemctl --quiet is-active systemd-journald.socket &>/dev/null \
-            && { echo "dracut-$DRACUT_VERSION" | systemd-cat -t 'dracut' &>/dev/null; } ; then
-            readonly _systemdcatfile="$DRACUT_TMPDIR/systemd-cat"
-            mkfifo "$_systemdcatfile"
-            readonly _dlogfd=15
-            systemd-cat -t 'dracut' --level-prefix=true <"$_systemdcatfile" &
-            exec 15>"$_systemdcatfile"
-        elif ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null; then
-            # We cannot log to syslog, so turn this facility off.
-            kmsgloglvl=$sysloglvl
-            sysloglvl=0
-            ret=1
-            errmsg="No '/dev/log' or 'logger' included for syslog logging"
-        fi
-    fi
-
-    if (($sysloglvl > 0)) || (($kmsgloglvl > 0 )); then
-        if [ -n "$dracutbasedir" ]; then
-            readonly syslogfacility=user
-        else
-            readonly syslogfacility=daemon
-        fi
-        export syslogfacility
-    fi
-
-    local lvl; local maxloglvl_l=0
-    for lvl in $stdloglvl $sysloglvl $fileloglvl $kmsgloglvl; do
-        (( $lvl > $maxloglvl_l )) && maxloglvl_l=$lvl
-    done
-    readonly maxloglvl=$maxloglvl_l
-    export maxloglvl
-
-
-    if (($stdloglvl < 6)) && (($kmsgloglvl < 6)) && (($fileloglvl < 6)) && (($sysloglvl < 6)); then
-        unset dtrace
-        dtrace() { :; };
-    fi
-
-    if (($stdloglvl < 5)) && (($kmsgloglvl < 5)) && (($fileloglvl < 5)) && (($sysloglvl < 5)); then
-        unset ddebug
-        ddebug() { :; };
-    fi
-
-    if (($stdloglvl < 4)) && (($kmsgloglvl < 4)) && (($fileloglvl < 4)) && (($sysloglvl < 4)); then
-        unset dinfo
-        dinfo() { :; };
-    fi
-
-    if (($stdloglvl < 3)) && (($kmsgloglvl < 3)) && (($fileloglvl < 3)) && (($sysloglvl < 3)); then
-        unset dwarn
-        dwarn() { :; };
-        unset dwarning
-        dwarning() { :; };
-    fi
-
-    if (($stdloglvl < 2)) && (($kmsgloglvl < 2)) && (($fileloglvl < 2)) && (($sysloglvl < 2)); then
-        unset derror
-        derror() { :; };
-    fi
-
-    if (($stdloglvl < 1)) && (($kmsgloglvl < 1)) && (($fileloglvl < 1)) && (($sysloglvl < 1)); then
-        unset dfatal
-        dfatal() { :; };
-    fi
-
-    [ -n "$errmsg" ] && derror "$errmsg"
-
-    return $ret
-}
-
-## @brief Converts numeric logging level to the first letter of level name.
-#
-# @param lvl Numeric logging level in range from 1 to 6.
-# @retval 1 if @a lvl is out of range.
-# @retval 0 if @a lvl is correct.
-# @result Echoes first letter of level name.
-_lvl2char() {
-    case "$1" in
-        1) echo F;;
-        2) echo E;;
-        3) echo W;;
-        4) echo I;;
-        5) echo D;;
-        6) echo T;;
-        *) return 1;;
-    esac
-}
-
-## @brief Converts numeric level to logger priority defined by POSIX.2.
-#
-# @param lvl Numeric logging level in range from 1 to 6.
-# @retval 1 if @a lvl is out of range.
-# @retval 0 if @a lvl is correct.
-# @result Echoes logger priority.
-_lvl2syspri() {
-    printf $syslogfacility.
-    case "$1" in
-        1) echo crit;;
-        2) echo error;;
-        3) echo warning;;
-        4) echo info;;
-        5) echo debug;;
-        6) echo debug;;
-        *) return 1;;
-    esac
-}
-
-## @brief Converts dracut-logger numeric level to syslog log level
-#
-# @param lvl Numeric logging level in range from 1 to 6.
-# @retval 1 if @a lvl is out of range.
-# @retval 0 if @a lvl is correct.
-# @result Echoes kernel console numeric log level
-#
-# Conversion is done as follows:
-#
-# <tt>
-#   none     -> LOG_EMERG (0)
-#   none     -> LOG_ALERT (1)
-#   FATAL(1) -> LOG_CRIT (2)
-#   ERROR(2) -> LOG_ERR (3)
-#   WARN(3)  -> LOG_WARNING (4)
-#   none     -> LOG_NOTICE (5)
-#   INFO(4)  -> LOG_INFO (6)
-#   DEBUG(5) -> LOG_DEBUG (7)
-#   TRACE(6) /
-# </tt>
-#
-# @see /usr/include/sys/syslog.h
-_dlvl2syslvl() {
-    local lvl
-
-    case "$1" in
-        1) lvl=2;;
-        2) lvl=3;;
-        3) lvl=4;;
-        4) lvl=6;;
-        5) lvl=7;;
-        6) lvl=7;;
-        *) return 1;;
-    esac
-
-    [ "$syslogfacility" = user ] && echo $((8+$lvl)) || echo $((24+$lvl))
-}
-
-## @brief Prints to stderr and/or writes to file, to syslog and/or /dev/kmsg
-# given message with given level (priority).
-#
-# @param lvl Numeric logging level.
-# @param msg Message.
-# @retval 0 It's always returned, even if logging failed.
-#
-# @note This function is not supposed to be called manually. Please use
-# dtrace(), ddebug(), or others instead which wrap this one.
-#
-# This is core logging function which logs given message to standard error, file
-# and/or syslog (with POSIX shell command <tt>logger</tt>) and/or to /dev/kmsg.
-# The format is following:
-#
-# <tt>X: some message</tt>
-#
-# where @c X is the first letter of logging level. See module description for
-# details on that.
-#
-# Message to syslog is sent with tag @c dracut. Priorities are mapped as
-# following:
-#   - @c FATAL to @c crit
-#   - @c ERROR to @c error
-#   - @c WARN to @c warning
-#   - @c INFO to @c info
-#   - @c DEBUG and @c TRACE both to @c debug
-_do_dlog() {
-    local lvl="$1"; shift
-    local lvlc=$(_lvl2char "$lvl") || return 0
-    local msg="$*"
-    local lmsg="$lvlc: $*"
-
-    (( $lvl <= $stdloglvl )) && printf -- 'dracut: %s\n' "$msg" >&2
-
-    if (( $lvl <= $sysloglvl )); then
-        if [[ "$_dlogfd" ]]; then
-            printf -- "<%s>%s\n" "$(($(_dlvl2syslvl $lvl) & 7))" "$msg" >&$_dlogfd
-        else
-            logger -t "dracut[$$]" -p $(_lvl2syspri $lvl) -- "$msg"
-        fi
-    fi
-
-    if (( $lvl <= $fileloglvl )) && [[ -w "$logfile" ]] && [[ -f "$logfile" ]]; then
-        echo "$lmsg" >>"$logfile"
-    fi
-
-    (( $lvl <= $kmsgloglvl )) && \
-        echo "<$(_dlvl2syslvl $lvl)>dracut[$$] $msg" >/dev/kmsg
-}
-
-## @brief Internal helper function for _do_dlog()
-#
-# @param lvl Numeric logging level.
-# @param msg Message.
-# @retval 0 It's always returned, even if logging failed.
-#
-# @note This function is not supposed to be called manually. Please use
-# dtrace(), ddebug(), or others instead which wrap this one.
-#
-# This function calls _do_dlog() either with parameter msg, or if
-# none is given, it will read standard input and will use every line as
-# a message.
-#
-# This enables:
-# dwarn "This is a warning"
-# echo "This is a warning" | dwarn
-dlog() {
-    [ -z "$maxloglvl" ] && return 0
-    (( $1 <= $maxloglvl )) || return 0
-
-    if (( $# > 1 )); then
-        _do_dlog "$@"
-    else
-        while read line || [ -n "$line" ]; do
-            _do_dlog "$1" "$line"
-        done
-    fi
-}
-
-## @brief Logs message at TRACE level (6)
-#
-# @param msg Message.
-# @retval 0 It's always returned, even if logging failed.
-dtrace() {
-    set +x
-    dlog 6 "$@"
-    [ -n "$debug" ] && set -x || :
-}
-
-## @brief Logs message at DEBUG level (5)
-#
-# @param msg Message.
-# @retval 0 It's always returned, even if logging failed.
-ddebug() {
-    set +x
-    dlog 5 "$@"
-    [ -n "$debug" ] && set -x || :
-}
-
-## @brief Logs message at INFO level (4)
-#
-# @param msg Message.
-# @retval 0 It's always returned, even if logging failed.
-dinfo() {
-    set +x
-    dlog 4 "$@"
-    [ -n "$debug" ] && set -x || :
-}
-
-## @brief Logs message at WARN level (3)
-#
-# @param msg Message.
-# @retval 0 It's always returned, even if logging failed.
-dwarn() {
-    set +x
-    dlog 3 "$@"
-    [ -n "$debug" ] && set -x || :
-}
-
-## @brief It's an alias to dwarn() function.
-#
-# @param msg Message.
-# @retval 0 It's always returned, even if logging failed.
-dwarning() {
-    set +x
-    dwarn "$@"
-    [ -n "$debug" ] && set -x || :
-}
-
-## @brief Logs message at ERROR level (2)
-#
-# @param msg Message.
-# @retval 0 It's always returned, even if logging failed.
-derror() {
-    set +x
-    dlog 2 "$@"
-    [ -n "$debug" ] && set -x || :
-}
-
-## @brief Logs message at FATAL level (1)
-#
-# @param msg Message.
-# @retval 0 It's always returned, even if logging failed.
-dfatal() {
-    set +x
-    dlog 1 "$@"
-    [ -n "$debug" ] && set -x || :
-}

dracut-update-initramfs

@@ -0,0 +1,558 @@
+#!/bin/sh
+
+STATEDIR=/var/lib/dracut
+BOOTDIR=/boot
+CONF=/etc/dracut.conf
+KPKGCONF=/etc/kernel-img.conf
+USETRIGGERS=true
+mode=""
+version=""
+
+set -e
+
+if        $USETRIGGERS                                         \
+       && [ x"$DPKG_MAINTSCRIPT_PACKAGE" != x ]                \
+       && [ $# = 1 ]                                           \
+       && [ x"$1" = x-u ]                                      \
+       && dpkg-trigger --check-supported 2>/dev/null
+then
+       if dpkg-trigger --no-await update-initramfs; then
+               echo "dracut-update-initramfs: deferring update (trigger activated)"
+               exit 0
+       fi
+fi
+
+usage()
+{
+       if [ -n "${1}" ]; then
+               printf "${@}\n\n" >&2
+       fi
+       cat >&2 << EOF
+Usage: ${0} [OPTION]...
+
+Options:
+ -k [version]  Specify kernel version or 'all'
+ -c            Create a new initramfs
+ -u            Update an existing initramfs
+ -d            Remove an existing initramfs
+ -t            Take over a custom initramfs with this one
+ -b            Set alternate boot directory
+ -v            Be verbose
+ -h            This message
+
+EOF
+       exit 1
+}
+
+# chroot check
+chrooted()
+{
+        # borrowed from udev's postinst
+        if [ "$(stat -c %d/%i /)" = "$(stat -Lc %d/%i /proc/1/root 2>/dev/null)" ]; then
+                # the devicenumber/inode pair of / is the same as that of
+                # /sbin/init's root, so we're *not* in a chroot and hence
+                # return false.
+                return 1
+        fi
+        return 0
+}
+
+mild_panic()
+{
+       if [ -n "${1}" ]; then
+               printf "${@}\n" >&2
+       fi
+       exit 0
+}
+
+panic()
+{
+       if [ -n "${1}" ]; then
+               printf "${@}\n" >&2
+       fi
+       exit 1
+}
+
+verbose()
+{
+       if [ "${verbose}" = 1 ]; then
+               printf "${@}\n"
+       fi
+}
+
+version_exists()
+{
+       [ -e "${STATEDIR}/${1}" ] && [ -e "${initramfs}" ]
+       return $?
+}
+
+set_initramfs()
+{
+       initramfs="${BOOTDIR}/dracut.img-${version}"
+}
+
+
+# backup initramfs while running
+backup_initramfs()
+{
+       [ ! -r "${initramfs}" ] && return 0
+       initramfs_bak="${initramfs}.dpkg-bak"
+       [ -r "${initramfs_bak}" ] && rm -f "${initramfs_bak}"
+       ln -f "${initramfs}" "${initramfs_bak}" \
+               || cp -a "${initramfs}" "${initramfs_bak}"
+       verbose "Keeping ${initramfs_bak}"
+}
+
+# keep booted initramfs
+backup_booted_initramfs()
+{
+       initramfs_bak="${initramfs}.dpkg-bak"
+
+       # first time run thus no backup
+       [ ! -r "${initramfs_bak}" ] && return 0
+
+       # chroot with no /proc
+       [ ! -r /proc/uptime ] && rm -f "${initramfs_bak}" && return 0
+
+       # no kept backup wanted
+       [ "${backup_initramfs}" = "no" ] && rm -f "${initramfs_bak}" && return 0
+
+       # no backup yet
+       if [ ! -r "${initramfs}.bak" ]; then
+               mv -f ${initramfs_bak} "${initramfs}.bak"
+               verbose "Backup ${initramfs}.bak"
+               return 0
+       fi
+
+       # keep booted initramfs
+       uptime_days=$(awk '{printf "%d", $1 / 3600 / 24}' /proc/uptime)
+       if [ -n "$uptime_days" ]; then
+               boot_initramfs=$(find "${initramfs}.bak" -mtime +${uptime_days})
+       fi
+       if [ -n "${boot_initramfs}" ]; then
+               mv -f "${initramfs_bak}" "${initramfs}.bak"
+               verbose "Backup ${initramfs}.bak"
+               return 0
+       fi
+       verbose "Removing current backup ${initramfs_bak}"
+       rm -f ${initramfs_bak}
+}
+
+# nuke generated copy
+remove_initramfs()
+{
+       [ -z "${initramfs_bak}" ] && return 0
+       rm -f "${initramfs_bak}"
+       verbose "Removing ${initramfs_bak}"
+}
+
+
+generate_initramfs()
+{
+       echo "dracut-update-initramfs: Generating ${initramfs}"
+       OPTS=""
+       if [ "${verbose}" = 1 ]; then
+               OPTS="-v ${OPTS}"
+       fi
+       ##WORK HERE!
+       if dracut ${OPTS} "${initramfs}.new" "${version}"; then
+               mv -f "${initramfs}.new" "${initramfs}"
+               set_sha1
+       else
+               mkinitramfs_return="$?"
+               remove_initramfs
+               rm -f "${initramfs}.new"
+               if [ "$mkinitramfs_return" = "2" ]; then
+                       # minversion wasn't met, exit 0
+                       exit 0
+               fi
+               echo "update-initramfs: failed for ${initramfs}"
+               exit $mkinitramfs_return
+       fi
+}
+
+# lilo call
+run_lilo()
+{
+       # show lilo errors on failure
+       if ! lilo -t  > /dev/null 2>&1 ; then
+               echo "ERROR lilo fails for new ${initramfs}:"
+               echo
+               lilo -t
+       fi
+       lilo
+}
+
+# check if lilo is on mbr
+mbr_check()
+{
+       # try to discover grub|grub2 and be happy
+       [ -r /boot/grub/grub.cfg ] \
+               && groot=$(awk '/^set root=/{print substr($2, 7, 3); exit}' \
+                       /boot/grub/grub.cfg)
+       [ -r /boot/grub/menu.lst ] \
+               && groot=$(awk '/^root/{print substr($2, 2, 3); exit}' \
+                       /boot/grub/menu.lst)
+       [ -e /boot/grub/device.map ] && [ -n "${groot}" ] \
+               && dev=$(awk "/${groot}/{ print \$NF}" /boot/grub/device.map)
+       [ -n "${dev}" ] && [ -r ${dev} ] \
+               && dd if="${dev}" bs=512 skip=0 count=1 2> /dev/null \
+               | grep -q GRUB && return 0
+
+       # check out lilo.conf for validity
+       boot=$(awk -F = '/^boot=/{ print $2}' /etc/lilo.conf)
+       [ -z "${boot}" ] && return 0
+       case ${boot} in
+       /dev/md/*)
+               if [ -r /proc/mdstat ]; then
+                       MD=${boot#/dev/md/}
+                       boot="/dev/$(awk "/^md${MD}/{print substr(\$5, 1, 3)}" \
+                       /proc/mdstat)"
+               fi
+               ;;
+       /dev/md*)
+               if [ -r /proc/mdstat ]; then
+                       MD=${boot#/dev/}
+                       boot="/dev/$(awk "/^${MD}/{print substr(\$5, 1, 3)}" \
+                       /proc/mdstat)"
+               fi
+               ;;
+       esac
+       [ ! -r "${boot}" ] && return 0
+       dd if="${boot}" bs=512 skip=0 count=1 2> /dev/null | grep -q LILO \
+               && run_lilo && return 0
+
+       # no idea which bootloader is used
+       echo
+       echo "WARNING: grub and lilo installed."
+       echo "If you use grub as bootloader everything is fine."
+       echo "If you use lilo as bootloader you must run lilo!"
+       echo
+}
+
+# Invoke bootloader
+run_bootloader()
+{
+       # if both lilo and grub around, figure out if lilo needs to be run
+       if ( command -v update-grub >/dev/null 2>&1 \
+               || [ -e /boot/grub/menu.lst ] || [ -e /boot/grub/grub.cfg ] ) \
+       && ( [ -e /etc/lilo.conf ] && command -v lilo >/dev/null 2>&1 ); then
+               [ -r "${KPKGCONF}" ] && \
+               do_b=$(awk  '/^do_bootloader/{print $3}' "${KPKGCONF}")
+               if [ "${do_b}" = "yes" ] || [ "${do_b}" = "Yes" ] \
+               || [ "${do_b}" = "YES" ]; then
+                       run_lilo
+                       return 0
+               elif [ "${do_b}" = "no" ] || [ "${do_b}" = "No" ] \
+               || [ "${do_b}" = "NO" ]; then
+                       return 0
+               fi
+
+               # do_bootloader unconfigured
+               mbr_check
+               return 0
+       fi
+       if [ -r /etc/lilo.conf ] && command -v lilo >/dev/null 2>&1; then
+               run_lilo
+               return 0
+       fi
+       if command -v elilo >/dev/null 2>&1; then
+               elilo
+               return 0
+       fi
+       if [ -r /etc/zipl.conf ]; then
+               zipl
+       fi
+       if flash-kernel --supported >/dev/null 2>&1; then
+               flash-kernel ${version}
+       fi
+}
+
+compare_sha1()
+{
+       sha1sum "${initramfs}" | diff "${STATEDIR}/${version}" - >/dev/null 2>&1
+       return $?
+}
+
+# Note that this must overwrite so that updates work.
+set_sha1()
+{
+       sha1sum "${initramfs}" > "${STATEDIR}/${version}"
+}
+
+delete_sha1()
+{
+       rm -f "${STATEDIR}/${version}"
+}
+
+# ro /boot is not modified
+ro_boot_check()
+{
+       # check irrelevant inside of a chroot
+       if [ ! -r /proc/mounts ] || chrooted; then
+               return 0
+       fi
+
+       boot_opts=$(awk '/boot/{if ((match($4, /^ro/) || match($4, /,ro/)) \
+               && $2 == "/boot") print "ro"}' /proc/mounts)
+       if [ -n "${boot_opts}" ]; then
+               echo "WARNING: /boot is ro mounted."
+               echo "update-initramfs: Not updating ${initramfs}"
+               exit 0
+       fi
+}
+
+get_sorted_versions()
+{
+       version_list=""
+
+       for gsv_x in "${STATEDIR}"/*; do
+               gsv_x="$(basename "${gsv_x}")"
+               if [ "${gsv_x}" = '*' ]; then
+                       return 0
+               fi
+               worklist=""
+               for gsv_i in $version_list; do
+                       if dpkg --compare-versions "${gsv_x}" '>' "${gsv_i}"; then
+                               worklist="${worklist} ${gsv_x} ${gsv_i}"
+                               gsv_x=""
+                       else
+                               worklist="${worklist} ${gsv_i}"
+                       fi
+               done
+               if [ "${gsv_x}" != "" ]; then
+                       worklist="${worklist} ${gsv_x}"
+               fi
+               version_list="${worklist}"
+       done
+
+       verbose "Available versions: ${version_list}"
+}
+
+set_current_version()
+{
+       if [ -f /boot/dracut.img-`uname -r` ]; then
+               version=`uname -r`
+       fi
+}
+
+set_linked_version()
+{
+       if [ -e /initrd.img ] && [ -L /initrd.img ]; then
+               linktarget="$(basename "$(readlink /initrd.img)")"
+       fi
+
+       if [ -e /boot/initrd.img ] && [ -L /boot/initrd.img ]; then
+               linktarget="$(basename "$(readlink /boot/initrd.img)")"
+       fi
+
+       if [ -z "${linktarget}" ]; then
+               return
+       fi
+
+       version="${linktarget##*img-}"
+}
+
+set_highest_version()
+{
+       get_sorted_versions
+       set -- ${version_list}
+       version=${1}
+}
+
+create()
+{
+       if [ -z "${version}" ]; then
+               usage "Create mode requires a version argument"
+       fi
+
+       set_initramfs
+
+       if [ "${takeover}" = 0 ]; then
+               if version_exists "${version}"; then
+                       panic "Cannot create version ${version}: already exists"
+               fi
+
+               if [ -e "${initramfs}" ]; then
+                       panic "${initramfs} already exists, cannot create."
+               fi
+       fi
+
+       generate_initramfs
+}
+
+update()
+{
+       if [ "${update_initramfs}" = "no" ]; then
+               echo "update-initramfs: Not updating initramfs."
+               exit 0
+       fi
+
+       if [ -z "${version}" ]; then
+               set_highest_version
+       fi
+
+       if [ -z "${version}" ]; then
+               set_linked_version
+       fi
+
+       if [ -z "${version}" ]; then
+               set_current_version
+       fi
+
+       if [ -z "${version}" ]; then
+               verbose "Nothing to do, exiting."
+               exit 0
+       fi
+
+       set_initramfs
+
+       ro_boot_check
+
+       altered_check
+
+       backup_initramfs
+
+       generate_initramfs
+
+       run_bootloader
+
+       backup_booted_initramfs
+}
+
+delete()
+{
+       if [ -z "${version}" ]; then
+               usage "Delete mode requires a version argument"
+       fi
+
+       set_initramfs
+
+       if [ ! -e "${initramfs}" ]; then
+               panic "Cannot delete ${initramfs}, doesn't exist."
+       fi
+
+       if ! version_exists "${version}"; then
+               panic "Cannot delete version ${version}: Not created by this utility."
+       fi
+
+       altered_check
+
+       echo "update-initramfs: Deleting ${initramfs}"
+
+       delete_sha1
+
+       rm -f "${initramfs}"
+}
+
+# Check for update mode on existing and modified initramfs
+altered_check()
+{
+       # No check on takeover
+       [ "${takeover}" = 1 ] && return 0
+       if [ ! -e "${initramfs}" ]; then
+               mild_panic "${initramfs} does not exist. Cannot update."
+       fi
+       if ! compare_sha1; then
+               echo "update-initramfs: ${initramfs} has been altered." >&2
+               mild_panic "update-initramfs: Cannot update. Override with -t option."
+       fi
+}
+
+# Defaults
+verbose=0
+yes=0
+# We default to takeover=1 in Ubuntu, but not Debian
+takeover=0
+
+##
+
+while getopts "k:cudyvtb:h?" flag; do
+       case "${flag}" in
+       k)
+               version="${OPTARG}"
+               ;;
+       c)
+               mode="c"
+               ;;
+       d)
+               mode="d"
+               ;;
+       u)
+               mode="u"
+               ;;
+       v)
+               verbose="1"
+               ;;
+       y)
+               yes="1"
+               ;;
+       t)
+               takeover="1"
+               ;;
+       b)
+               BOOTDIR="${OPTARG}"
+               if [ ! -d "${BOOTDIR}" ]; then
+                       echo "Error: ${BOOTDIR} is not a directory."
+                       exit 1
+               fi
+               ;;
+       h|?)
+               usage
+               ;;
+       esac
+done
+
+shift $((${OPTIND} - 1))
+
+if [ $# -ne 0 ]; then
+       echo "Invalid argument for option -k."
+       usage
+fi
+
+# Validate arguments
+if [ -z "${mode}" ]; then
+       usage "You must specify at least one of -c, -u, or -d."
+fi
+
+if [ "${version}" = "all" ] \
+       || ( [ "${update_initramfs}" = "all" ] && [ -z "${version}" ] ); then
+       : FIXME check for --yes, and if not ask are you sure
+       get_sorted_versions
+       if [ -z "${version_list}" ]; then
+               verbose "Nothing to do, exiting."
+               exit 0
+       fi
+
+       OPTS="-b ${BOOTDIR}"
+       if [ "${verbose}" = "1" ]; then
+               OPTS="${OPTS} -v"
+       fi
+       if [ "${takeover}" = "1" ]; then
+               OPTS="${OPTS} -t"
+       fi
+       if [ "${yes}" = "1" ]; then
+               OPTS="${OPTS} -y"
+       fi
+       for u_version in ${version_list}; do
+               # Don't stop if one version doesn't work.
+               set +e
+               verbose "Execute: ${0} -${mode} -k \"${u_version}\" ${OPTS}"
+               "${0}" -${mode} -k "${u_version}" ${OPTS}
+               set -e
+       done
+       exit 0
+fi
+
+
+case "${mode}" in
+       c)
+               create
+               ;;
+       d)
+               delete
+               ;;
+       u)
+               update
+               ;;
+esac

dracut.8

@@ -0,0 +1,511 @@
+.TH DRACUT 8 "June 2009" "Linux"
+.SH NAME
+dracut \- create initial ramdisk images for preloading modules
+.SH SYNOPSIS
+\fBdracut\fR [\fIOPTION\fR]... \fI<image>\fR  \fI<kernel-version>\fR
+
+.SH DESCRIPTION
+.B dracut
+creates an initial image used by the kernel for
+preloading the block device modules (such as IDE, SCSI or RAID)
+which are needed to access the root filesystem.
+
+.SS Options
+.TP
+.BR \-f ", " \-\-force
+overwrite existing initramfs file.
+.TP
+.BR \-m ", " \-\-modules " \fILIST\fR"
+specify a space-separated list of dracut modules to call 
+when building the initramfs. 
+Modules are located in 
+.IR /usr/share/dracut/modules.d .
+.TP
+.BR \-o ", " \-\-omit " \fILIST\fR"
+omit a space-separated list of dracut modules.
+.TP
+.BR \-a ", " \-\-add " \fILIST\fR"
+add a space-separated list of dracut modules.
+.TP
+.BR \-d ", " \-\-drivers " \fILIST\fR"
+specify a space-separated list of kernel modules to exclusively include
+in the initramfs.
+The kernel modules have to be specified without the ".ko" suffix.
+.TP
+.BR \-\-add-drivers " \fILIST\fR"
+specify a space-separated list of kernel modules to add to the initramfs.
+The kernel modules have to be specified without the ".ko" suffix.
+.TP
+.BR \-\-omit-drivers " \fILIST\fR"
+specify a space-separated list of kernel modules to omit from the initramfs.
+The kernel modules have to be specified without the ".ko" suffix. 
+Regular expressions are also allowed like ".*/fs/ocfs/.*".
+
+If [LIST] has multiple arguments, then you have to put these in quotes.
+
+example:
+# dracut --omit "module1 module2"  ...
+.TP
+.BR \-\-filesystems " \fILIST\fR"
+specify a space-separated list of kernel filesystem modules to exclusively 
+include in the generic initramfs.
+.TP
+.BR \-k ", " \-\-kmoddir " \fI{DIR}\fR   
+specify the directory, where to look for kernel modules
+.TP
+.BR " \-\-fwdir " \fI{DIR}\fR   
+specify additional directory, where to look for firmwares
+.TP
+.BR \-\-kernel-only
+only install kernel drivers and firmware files
+.TP
+.BR \-\-no-kernel
+do not install kernel drivers and firmware files
+.TP
+.BR \-\-mdadmconf
+include local /etc/mdadm.conf
+.TP
+.BR \-\-nomdadmconf
+do not include local /etc/mdadm.conf
+.TP
+.BR \-\-strip
+strip binaries in the initramfs (default)
+.TP
+.BR \-\-nostrip
+do not strip binaries in the initramfs
+.TP
+.BR \-h ", " \-\-help
+display help text and exit. 
+.TP
+.B \-\-debug
+output debug information of the build process
+.TP
+.BR \-v ", " \-\-verbose
+verbose output during the build process
+.TP
+.BR \-c ", " \-\-conf " \fIFILE\fR"
+specify configuration file to use.
+Default: 
+.IR /etc/dracut.conf
+.TP
+.BR \-\-confdir " \fIDIR\fR"
+specify configuration directory to use.
+Default: 
+.IR /etc/dracut.conf.d
+.TP
+.BR \-l ", " \-\-local
+local mode. Use modules from the current working
+directory instead of the system-wide installed in
+.IR /usr/share/dracut/modules.d .
+Useful when running dracut from a git checkout.
+.TP
+.BR \-H ", " \-\-hostonly
+Host-Only mode: Install only what is needed for
+booting the local host instead of a generic host.
+.TP
+.BR \-i ", " \-\-include " \fISOURCE\fR" "" " \fITARGET\fR"
+include the files in the SOURCE directory into the
+target directory in the final initramfs.
+.TP
+.BR \-I ", " \-\-install " \fILIST\fR"
+install the space separated list of files into the initramfs.
+
+.SH "KERNEL COMMAND LINE"
+The root filesystem used by the kernel is specified in the boot configuration
+file, as always. The traditional \fBroot=/dev/hda1\fR style device 
+specification is allowed. If a label is used, as in \fBroot=LABEL=rootPart\fR
+the initrd will search all available devices for an ext2 or ext3 filesystem
+with the appropriate label, and mount that device as the root filesystem.
+\fBroot=UUID=uuidnumber\fR will mount the partition with that UUID as the 
+root filesystem.
+
+.SS Standard
+.TP
+.BR init= "<path to real init>"
+.TP
+.BR root= "<path to blockdevice>"
+specify blockdevice to use as root filesystem. 
+ e.g.
+  root=/dev/sda1
+  root=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1
+.TP
+.BR rootfstype= "<filesystem type>"
+"auto" if not specified, e.g. rootfstype=ext3
+.TP
+.BR rootflags= "<mount options>"
+specify additional mount options for the root filesystem. If not set, /etc/fstab
+of the real root will be parsed for special mount options and mounted 
+accordingly.
+.TP
+\fBrootfallback=\fR\fI<path to blockdevice>\fR
+specify the block device to use as the root filesystem, if the normal root cannot be found\&. This can only be a simple block device with a simple file system, for which the filesystem driver is either compiled in, or added manually to the initramfs\&. This parameter can be specified multiple times\&.
+.TP
+.B rd_NO_FSTAB
+do not honor special mount options for the root filesystem found in 
+/etc/fstab of the real root.
+
+.SS Misc
+.TP
+.BR hostname= "<hostname>"
+set the initial hostname
+.TP
+.BR rdblacklist= "<drivername>"
+do not load kernel module <drivername>
+This parameter can be specified multiple times.
+.TP
+.BR rdloaddriver= "<drivername>"
+force loading kernel module <drivername>
+This parameter can be specified multiple times.
+.TP
+.BR rd_retry= "<seconds>"
+wait <seconds> until dracut tries to force assemble LVM or RAID volumes. If the root device is not found within <seconds>*2 then dracut fails and either drops to a shell, if rdshell is on the kernel command line, or exits with 1, which normally causes a kernel panic.
+
+Default: rd_retry=40
+
+.SS Debug
+.TP
+.B rdinfo
+print informational output though "quiet" is set
+.TP
+.B rdshell
+allow dropping to a shell, if root mounting fails
+.TP
+.B rdinitdebug
+set -x for the dracut shell and logs to dmesg, console and /init.log
+.TP
+.B rdbreak
+drop to a shell at the end
+.TP
+.ad l
+.BR rdbreak= \%{cmdline\:|pre-udev\:|pre-trigger\:|initqueue\:|pre-mount\:|mount\:|pre-pivot}
+.ad
+drop to a shell on defined breakpoint
+.TP
+.B rdudevinfo
+set udev to loglevel info
+.TP
+.B rdudevdebug
+set udev to loglevel debug
+
+.SS I18N
+ e.g.
+  LANG=en_US.UTF-8
+  SYSFONT=latarcyrheb-sun16
+  KEYTABLE=de-latin1-nodeadkeys
+.TP
+.BR KEYBOARDTYPE= sun|pc
+will be written to /etc/sysconfig/keyboard in the initramfs
+.TP
+.BR KEYTABLE= "<keytable filename>"
+will be written to /etc/sysconfig/keyboard in the initramfs
+.TP
+.BR SYSFONT= "Console font"
+will be written to /etc/sysconfig/i18n in the initramfs
+.TP
+.BR SYSFONTACM= "Unicode font map"
+will be written to /etc/sysconfig/i18n in the initramfs
+.TP
+.BR UNIMAP= "Unicode font map"
+will be written to /etc/sysconfig/i18n in the initramfs
+.TP
+.BR LANG= <locale>
+will be written to /etc/sysconfig/i18n in the initramfs
+
+.SS LVM
+.TP
+.BR rd_NO_LVM
+disable LVM detection
+.TP
+.BR rd_LVM_VG= "<volume group name>"
+only activate the volume groups with the given name
+rd_LVM_VG can be specified multiple times on the kernel command line.
+.TP
+.BR rd_LVM_LV= "<logical volume name>"
+only activate the logical volumes with the given name
+rd_LVM_LV can be specified multiple times on the kernel command line.
+.TP
+.BR rd_NO_LVMCONF
+remove any /etc/lvm/lvm.conf, which may exist in the initramfs
+
+.SS "crypto LUKS"
+.TP
+.BR rd_NO_LUKS
+disable crypto LUKS detection
+.TP
+.BR rd_LUKS_UUID= "<luks uuid>"
+only activate the LUKS partitions with the given UUID
+Any "luks-" of the LUKS UUID is removed before comparing to <luks uuid>.
+The comparisons also matches, if <luks uuid> is only the beginning of the 
+LUKS UUID, so you don't have to specify the full UUID.
+This parameter can be specified multiple times.
+.TP
+.BR rd_NO_CRYPTTAB
+do not check, if LUKS partition is in /etc/crypttab
+
+.SS MD
+.TP
+.BR rd_NO_MD
+disable MD RAID detection
+.TP
+.BR rd_NO_MDIMSM
+no MD RAID for imsm/isw raids, use dmraid instead
+.TP
+.BR rd_NO_MDADMCONF
+ignore mdadm.conf included in initramfs
+.TP
+.BR rd_MD_UUID= "<md uuid>"
+only activate the raid sets with the given UUID.
+This parameter can be specified multiple times.
+
+.SS DMRAID
+.TP
+.BR rd_NO_DM
+disable DM RAID detection
+.TP
+.BR rd_DM_UUID= "<dmraid uuid>"
+only activate the raid sets with the given UUID.
+This parameter can be specified multiple times.
+
+.SS MULTIPATH
+.TP
+.BR rd_NO_MULTIPATH
+disable multipath in the initramfs
+
+.SS FIPS
+.TP
+.BR fips=1
+enable FIPS
+.TP
+.BR boot=<boot device>
+specify the device, where /boot is located
+ e.g.
+  boot=/dev/sda1
+  boot=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1
+  boot=UUID=<uuid>
+  boot=LABEL=<label>
+
+If the root device is encrypted, the /boot partition must reside on a seperate partition and has to be specified.
+
+.SS Network
+.TP
+.BR ip= {dhcp|on|any|dhcp6|auto6|ibft}
+dhcp|on|any: get ip from dhcp server from all interfaces. If root=dhcp, 
+loop sequentially through all interfaces (eth0, eth1, ...) and use the first 
+with a valid DHCP root-path.
+.sp
+\fBauto6\fR: IPv6 autoconfiguration
+.sp
+\fBdhcp6\fR: IPv6 DHCP
+.sp
+\fBibft\fR: iBFT autoconfiguration
+
+.TP
+.BR ip= <interface>:{dhcp|on|any|dhcp6|auto6}
+dhcp|on|any|dhcp6: get ip from dhcp server on a specific interface
+auto6: do IPv6 autoconfiguration
+This parameter can be specified multiple times.
+
+.TP
+.ad l
+.BR ip= "\%<client-IP>\::[<server-id>]\::<gateway-IP>\::<netmask>\::<client\%hostname>\::<interface>\::{none|off}"
+.ad
+explicit network configuration. If you want do define a IPv6 address, put it in brackets (e.g. [2001:DB8::1]).
+This parameter can be specified multiple times.
+.TP
+.BR ifname= <interface>:<MAC>
+Assign network device name <interface> (ie eth0) to the NIC with MAC <MAC>.
+Note that if you use this option you \fBmust\fR specify an ifname= argument
+for all interfaces used in ip= or fcoe= arguments
+This parameter can be specified multiple times.
+.TP
+.BR bootdev= <interface>
+specify network interface to use routing and netroot information from. 
+Required if multiple ip= lines are used.
+.TP
+.BR nameserver= "<IP> [nameserver=<IP> ...]"
+specify nameserver(s) to use
+.TP
+.BR vlan= "<vlanname>:<phydevice>"
+Setup vlan device named <vlanname> on <phydeivce>.
+ We support the four styles of vlan names: VLAN_PLUS_VID (vlan0005), VLAN_PLUS_VID_NO_PAD (vlan5),
+DEV_PLUS_VID (eth0.0005), DEV_PLUS_VID_NO_PAD (eth0.5)
+This parameter can be specified multiple times.
+.TP
+.BR bridge= "<bridgename>:<ethnames>"
+Setup bridge <bridgename> with <ethnames>\&. <ethnames> is a comma\-separated list of physical (ethernet) interfaces\&. Bridge without parameters assumes bridge=br0:eth0
+.TP
+.BR bond= "<bondname>[:<bondslaves>:[:<options>]]"
+Setup bonding device <bondname> on top of <bondslaves>\&. <bondslaves> is a comma\-separated list of physical (ethernet) interfaces\&. <options> is a comma\-separated list on bonding options (modinfo bonding for details) in format compatible with initscripts\&. If <options> includes multi\-valued arp_ip_target option, then its values should be separated by semicolon\&. Bond without parameters assumes bond=bond0:eth0,eth1:mode=balance\-rr
+.TP
+.BR biosdevname={0|1]}
+turn off/on biosdevname network interface renaming
+.SS NFS
+.TP
+.BR root= "[<server-ip>:]<root-dir>[:<nfs-options>]"
+mount nfs share from <server-ip>:/<root-dir>, if no server-ip is given,
+use dhcp next_server. if server-ip is an IPv6 address it has to be put in brackets, e.g. [2001:DB8::1].
+NFS options can be appended with the prefix ":" or "," and are seperated by ",".
+.TP
+.BR root= "nfs:[<server-ip>:]<root-dir>[:<nfs-options>]"
+.TP
+.BR root= "nfs4:[<server-ip>:]<root-dir>[:<nfs-options>]"
+.TP
+.BR root= dhcp|dhcp6 
+root=dhcp alone directs initrd to look at the DHCP root-path where NFS 
+options can be specified.
+    root-path=<server-ip>:<root-dir>[,<nfs-options>]
+    root-path=nfs:<server-ip>:<root-dir>[,<nfs-options>]
+    root-path=nfs4:<server-ip>:<root-dir>[,<nfs-options>] 
+.TP
+.BR root= /dev/nfs " nfsroot=" "[<server-ip>:]<root-dir>[,<nfs-options>]"
+\fBDeprecated!\fR kernel Documentation/filesystems/nfsroot.txt defines 
+this method.  
+This is supported by dracut but not recommended.
+.TP
+.BR rd_NFS_DOMAIN= "<NFSv4 domain name>"
+Set the NFSv4 domain name. Will overwrite the settings in /etc/idmap.conf.
+
+.SS iSCSI
+.TP
+.ad l
+.BR root= "\%iscsi:[username:password\:[:reverse:password]@]\:[<servername>]\::[<protocol>]\::[<port>]\:[:[<iscsi_iface_name>]:[<netdev_name>]]\::[<LUN>]\::<targetname>"
+.ad
+protocol defaults to "6", LUN defaults to "0".
+
+If the "servername" field is provided by BOOTP or DHCP, then that
+field is used in conjunction with other associated fields to contact
+the boot server in the Boot stage (Section 7).  However, if the
+"servername" field is not provided, then the "targetname" field is
+then used in the Discovery Service stage in conjunction with other
+associated fields.
+
+http://tools.ietf.org/html/rfc4173
+
+.TP
+.ad l
+.BR root= "\%iscsi:[username:password\:[:reverse:password]@]\:[<servername>]\::[<protocol>]\::[<port>]\:[:[<iscsi_iface_name>]:[<netdev_name>]]\::[<LUN>]\::<targetname>"
+.ad
+e.g. root=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0
+
+.ad l
+If servername is an IPv6 address, it has to be put in brackets.
+ e.g. 
+  root=iscsi:[2001:DB8::1]::::iqn.2009-06.dracut:target0
+.TP
+.ad l
+.BR root= ??? " netroot=" "\%iscsi:[username:password[:reverse:password]@]\:[<servername>]\::[<protocol>]\::[<port>]\:[:[<iscsi_iface_name>]:[<netdev_name>]]\::[<LUN>]\::<targetname> ..."
+.ad
+multiple netroot options allow setting up multiple iscsi disks
+ e.g. 
+  root=UUID=12424547
+  netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0
+  netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target1
+
+.ad l
+If servername is an IPv6 address, it has to be put in brackets.
+ e.g.
+  netroot=iscsi:[2001:DB8::1]::::iqn.2009-06.dracut:target0
+.TP
+.ad l
+.BR \%root= \%??? " \%iscsi_initiator=" \%<initiator> " \%iscsi_target_name=" "<target name>" " \%iscsi_target_ip=" "<target ip>" " \%iscsi_target_port=" "<target port>" " \%iscsi_target_group=" "<target group>" " \%iscsi_username=" "<username>" " \%iscsi_password=" <password> " \%iscsi_in_username=" "<in username>" " \%iscsi_in_password=" "<in password>"
+.ad
+manually specify all iscsistart parameter (see \fIiscsistart\ --help\fR)
+
+.TP
+.BR root= ??? " netroot=iscsi iscsi_firmware"
+will read the iscsi parameter from the BIOS firmware
+
+.TP
+.BR iscsi_param= <param>
+<param> will be passed as "--param <param>" to iscsistart.
+This parameter can be specified multiple times.
+ e.g.:
+   "netroot=iscsi iscsi_firmware iscsi_param=node.session.timeo.replacement_timeout=30"
+   will result in
+   iscsistart -b --param node.session.timeo.replacement_timeout=30
+
+.SS FCoE
+.TP
+.BR fcoe=<edd|interface|MAC>:<dcb|nodcb>
+Try to connect to a FCoE SAN through the NIC specified by <interface> or <MAC> or EDD settings.
+This parameter can be specified multiple times.
+
+.SS NBD
+.TP
+.BR root= nbd:<server>:<port>[:<fstype>][:<mountopts>]
+mount nbd share from <server>
+.TP
+.BR root= dhcp 
+with dhcp root-path=nbd:<server>:<port>[:<fstype>][:<mountopts>]
+root=dhcp alone directs initrd to look at the DHCP root-path where NBD 
+options can be specified.
+This syntax is only usable in cases where you are directly mounting the volume 
+as the rootfs.
+
+
+.SS DASD
+.TP
+.BR rd_DASD_MOD= ....
+same syntax as the kernel module parameter (s390 only)
+
+.TP
+.ad l
+.BR rd_DASD= "\%<dasd adaptor device bus ID>\:[,readonly=X]\:[,use_diag=X]\:[,erplog=X]\:[,failfast=X]"
+.ad
+activate DASD device with the given adaptor device bus ID and setting the sysfs attributes
+to the specified values
+This parameter can be specified multiple times.
+
+.SS ZFCP
+.TP
+.BR rd_ZFCP= "<zfcp adaptor device bus ID>,\:<WWPN>,\:<FCPLUN>"
+rd_ZFCP can be specified multiple times on the kernel command line.
+
+example: rd_ZFCP=0.0.4000,0x5005076300C213e9,0x5022000000000000 
+.TP
+.BR rd_NO_ZFCPCONF
+ignore zfcp.conf included in the initramfs
+
+.SS ZNET
+.TP
+.BR rd_ZNET= "<nettype>,<subchannels>,<options>"
+rd_ZNET can be specified multiple times on the kernel command line. Examples:
+    rd_ZNET=qeth,0.0.0600,0.0.0601,0.0.0602,layer2=1,portname=foo
+    rd_ZNET=ctc,0.0.0600,0.0.0601,0.0.0602,protocol=bar
+
+.SS "Plymouth Boot Splash"
+.TP
+.BR rd_NO_PLYMOUTH
+do not start plymouth. This will not work with encrypted partitions.
+
+.SH FILES
+.TP
+.B /var/log/dracut.log
+.TP
+.B /etc/dracut.conf
+see \fBdracut.conf\fR(5)
+.SS "Configuration in the Initramfs"
+.TP 
+.B /etc/conf.d/
+Any files found in /etc/conf.d/ will be sourced in the initramfs to 
+set initial values. Command line options will override these values 
+set in the configuration files.
+.TP
+.B /etc/cmdline
+Can contain additional command line options.
+
+.SH AUTHORS
+.nf
+Harald Hoyer <harald@redhat.com>
+Victor Lowther <victor.lowther@gmail.com>
+Warren Togami <wtogami@redhat.com>
+Jeremy Katz <katzj@redhat.com>
+Philippe Seewer <philippe.seewer@bfh.ch>
+David Dillow <dave@thedillows.org>
+.fi
+.SH AVAILABILITY
+The dracut command is part of the dracut package and is available from
+http://sourceforge.net/apps/trac/dracut/wiki
+
+.SH SEE ALSO
+.BR dracut.conf (5)

dracut.8.asc

@@ -1,577 +0,0 @@
-DRACUT(8)
-=========
-:doctype: manpage
-:man source:   dracut
-:man manual:   dracut
-
-NAME
-----
-dracut - low-level tool for generating an initramfs/initrd image
-
-SYNOPSIS
---------
-*dracut* [__OPTION...__] [__<image>__ [__<kernel version>__]]
-
-DESCRIPTION
------------
-
-Create an initramfs <image> for the kernel with the version <kernel version>.
-If <kernel version> is omitted, then the version of the actual running
-kernel is used. If <image> is omitted or empty, then the default location
-/boot/initramfs-<kernel version>.img is used.
-
-dracut creates an initial image used by the kernel for preloading the block
-device modules (such as IDE, SCSI or RAID) which are needed to access the root
-filesystem, mounting the root filesystem and booting into the real system.
-
-At boot time, the kernel unpacks that archive into RAM disk, mounts and uses it
-as initial root file system. All finding of the root device happens in this
-early userspace.
-
-Initramfs images are also called "initrd".
-
-For a complete list of kernel command line options see *dracut.cmdline*(7).
-
-If you are dropped to an emergency shell, while booting your initramfs,
-the file _/run/initramfs/rdsosreport.txt_ is created, which can be saved to a
-(to be mounted by hand) partition (usually /boot) or a USB stick.
-Additional debugging info can be produced by adding **rd.debug** to the kernel
-command line. _/run/initramfs/rdsosreport.txt_ contains all logs and the output
-of some tools. It should be attached to any report about dracut problems.
-
-USAGE
------
-
-include::dracut.usage.asc[]
-
-OPTIONS
--------
-**--kver** _<kernel version>_::
-    set the kernel version. This enables to specify the kernel version, without
-    specifying the location of the initramfs image. For example:
-----
-# dracut --kver 3.5.0-0.rc7.git1.2.fc18.x86_64
-----
-
-**-f, --force**::
-    overwrite existing initramfs file.
-
-**-a, --add** _<list of dracut modules>_::
-    add a space-separated list of dracut modules to the default set of modules.
-    This parameter can be specified multiple times.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --add "module1 module2"  ...
-----
-===============================
-
-**--force-add** _<list of dracut modules>_::
-    force to add a space-separated list of dracut modules to the default set of
-    modules, when -H is specified. This parameter can be specified multiple
-    times.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --force-add "module1 module2"  ...
-----
-===============================
-
-**-o, --omit** _<list of dracut modules>_::
-    omit a space-separated list of dracut modules. This parameter can be
-    specified multiple times.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --omit "module1 module2"  ...
-----
-===============================
-
-**-m, --modules** _<list of dracut modules>_::
-    specify a space-separated list of dracut modules to call when building the
-    initramfs. Modules are located in _/usr/lib/dracut/modules.d_. This
-    parameter can be specified multiple times.
-    This option forces dracut to only include the specified dracut modules.
-    In most cases the "--add" option is what you want to use.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --modules "module1 module2"  ...
-----
-===============================
-
-**-d, --drivers** _<list of kernel modules>_::
-    specify a space-separated list of kernel modules to exclusively include
-    in the initramfs. The kernel modules have to be specified without the ".ko"
-    suffix. This parameter can be specified multiple times.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --drivers "kmodule1 kmodule2"  ...
-----
-===============================
-
-**--add-drivers** _<list of kernel modules>_::
-    specify a space-separated list of kernel modules to add to the initramfs.
-    The kernel modules have to be specified without the ".ko" suffix. This
-    parameter can be specified multiple times.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --add-drivers "kmodule1 kmodule2"  ...
-----
-===============================
-
-**--force-drivers** _<list of kernel modules>_::
-    See add-drivers above. But in this case it is ensured that the drivers
-    are tried to be loaded early via modprobe.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --force-drivers "kmodule1 kmodule2"  ...
-----
-===============================
-
-**--omit-drivers** _<list of kernel modules>_::
-    specify a space-separated list of kernel modules not to add to the
-    initramfs.
-    The kernel modules have to be specified without the ".ko" suffix. This
-    parameter can be specified multiple times.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --omit-drivers "kmodule1 kmodule2"  ...
-----
-===============================
-
-**--filesystems** _<list of filesystems>_::
-    specify a space-separated list of kernel filesystem modules to exclusively
-    include in the generic initramfs. This parameter can be specified multiple
-    times.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --filesystems "filesystem1 filesystem2"  ...
-----
-===============================
-
-**-k, --kmoddir** _<kernel directory>_::
-    specify the directory, where to look for kernel modules
-
-**--fwdir** _<dir>[:<dir>...]++_::
-    specify additional directories, where to look for firmwares. This parameter
-    can be specified multiple times.
-
-**--kernel-cmdline <parameters>**::
-    specify default kernel command line parameters
-
-
-**--kernel-only**::
-    only install kernel drivers and firmware files
-
-**--no-kernel**::
-    do not install kernel drivers and firmware files
-
-**--early-microcode**::
-    Combine early microcode with ramdisk
-
-**--no-early-microcode**::
-    Do not combine early microcode with ramdisk
-
-**--print-cmdline**::
-    print the kernel command line for the current disk layout
-
-**--mdadmconf**::
-    include local _/etc/mdadm.conf_
-
-**--nomdadmconf**::
-    do not include local _/etc/mdadm.conf_
-
-**--lvmconf**::
-    include local _/etc/lvm/lvm.conf_
-
-**--nolvmconf**::
-    do not include local _/etc/lvm/lvm.conf_
-
-**--fscks** [LIST]::
-    add a space-separated list of fsck tools, in addition to _dracut.conf_'s
-    specification; the installation is opportunistic (non-existing tools are
-    ignored)
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --fscks "fsck.foo barfsck"  ...
-----
-===============================
-
-**--nofscks**::
-    inhibit installation of any fsck tools
-
-**--strip**::
-    strip binaries in the initramfs (default)
-
-**--nostrip**::
-    do not strip binaries in the initramfs
-
-**--hardlink**::
-    hardlink files in the initramfs (default)
-
-**--nohardlink**::
-    do not hardlink files in the initramfs
-
-**--prefix** _<dir>_::
-    prefix initramfs files with the specified directory
-
-**--noprefix**::
-    do not prefix initramfs files (default)
-
-**-h, --help**::
-    display help text and exit.
-
-**--debug**::
-    output debug information of the build process
-
-**-v, --verbose**::
-    increase verbosity level (default is info(4))
-
-**-q, --quiet**:: decrease verbosity level (default is info(4))
-
-**-c, --conf** _<dracut configuration file>_::
-    specify configuration file to use.
-+
-Default:
-   _/etc/dracut.conf_
-
-**--confdir** _<configuration directory>_::
-    specify configuration directory to use.
-+
-Default:
-   _/etc/dracut.conf.d_
-
-**--tmpdir** _<temporary directory>_::
-    specify temporary directory to use.
-+
-Default:
-   _/var/tmp_
-
-**--sshkey** _<sshkey file>_:: ssh key file used with ssh-client module.
-
-**--logfile** _<logfile>_:: logfile to use; overrides any setting from
-    the configuration files.
-+
-Default:
-    _/var/log/dracut.log_
-
-**-l, --local**::
-    activates the local mode. dracut will use modules from the current working
-    directory instead of the system-wide installed modules in
-    _/usr/lib/dracut/modules.d_.
-    This is useful when running dracut from a git checkout.
-
-**-H, --hostonly**::
-    Host-Only mode: Install only what is needed for booting the local host
-    instead of a generic host and generate host-specific configuration.
-+
-[WARNING]
-====
-If chrooted to another root other than the real root device, use "--fstab" and
-provide a valid _/etc/fstab_.
-====
-
-**-N, --no-hostonly**::
-    Disable Host-Only mode
-
-**--hostonly-cmdline**:
-    Store kernel command line arguments needed in the initramfs
-
-**--no-hostonly-cmdline**:
-    Do not store kernel command line arguments needed in the initramfs
-
-**--no-hostonly-default-device**:
-    Do not generate implicit host devices like root, swap, fstab, etc.
-    Use "--mount" or "--add-device" to explicitly add devices as needed.
-
-**--hostonly-i18n**:
-    Install only needed keyboard and font files according to the host configuration (default).
-
-**--no-hostonly-i18n**:
-    Install all keyboard and font files available.
-
-**--persistent-policy** _<policy>_::
-    Use _<policy>_ to address disks and partitions.
-    _<policy>_ can be any directory name found in /dev/disk.
-    E.g. "by-uuid", "by-label"
-
-**--fstab**::
-    Use _/etc/fstab_ instead of _/proc/self/mountinfo_.
-
-**--add-fstab** _<filename>_::
-    Add entries of _<filename>_ to the initramfs /etc/fstab.
-
-**--mount** "_<device>_ _<mountpoint>_ _<filesystem type>_ [_<filesystem options>_ [_<dump frequency>_ [_<fsck order>_]]]"::
-    Mount _<device>_ on _<mountpoint>_ with _<filesystem type>_ in the
-    initramfs. _<filesystem options>_, _<dump options>_ and _<fsck order>_ can
-    be specified, see fstab manpage for the details.
-    The default _<filesystem options>_ is "defaults".
-    The default _<dump frequency>_ is "0".
-    the default _<fsck order>_ is "2".
-
-**--mount** "_<mountpoint>_"::
-    Like above, but _<device>_, _<filesystem type>_ and _<filesystem options>_
-    are determined by looking at the current mounts.
-
-**--add-device** _<device>_ ::
-    Bring up _<device>_ in initramfs, _<device>_ should be the device name.
-    This can be useful in hostonly mode for resume support when your swap is on
-    LVM or an encrypted partition.
-    [NB --device can be used for compatibility with earlier releases]
-
-**-i, --include** _<SOURCE>_ _<TARGET>_::
-    include the files in the SOURCE directory into the
-    TARGET directory in the final initramfs. If SOURCE is a file, it will be
-    installed to TARGET in the final initramfs. This parameter can be specified
-    multiple times.
-
-**-I, --install** _<file list>_::
-    install the space separated list of files into the initramfs.
-+
-[NOTE]
-===============================
-If [LIST] has multiple arguments, then you have to put these in quotes. For
-example:
-----
-# dracut --install "/bin/foo /sbin/bar"  ...
-----
-===============================
-
-**--install-optional** _<file list>_::
-    install the space separated list of files into the initramfs, if they exist.
-
-**--gzip**::
-    Compress the generated initramfs using gzip. This will be done by default,
-    unless another compression option or --no-compress is passed. Equivalent to
-    "--compress=gzip -9"
-
-**--bzip2**::
-    Compress the generated initramfs using bzip2.
-+
-[WARNING]
-====
-Make sure your kernel has bzip2 decompression support compiled in, otherwise you
-will not be able to boot. Equivalent to "--compress=bzip2"
-====
-
-**--lzma**::
-    Compress the generated initramfs using lzma.
-+
-[WARNING]
-====
-Make sure your kernel has lzma decompression support compiled in, otherwise you
-will not be able to boot. Equivalent to "lzma --compress=lzma -9"
-====
-
-**--xz**::
-    Compress the generated initramfs using xz.
-+
-[WARNING]
-====
-Make sure your kernel has xz decompression support compiled in, otherwise you
-will not be able to boot. Equivalent to
-"lzma --compress=xz --check=crc32 --lzma2=dict=1MiB"
-====
-
-**--lzo**::
-    Compress the generated initramfs using lzop.
-[WARNING]
-====
-Make sure your kernel has lzo decompression support compiled in, otherwise you
-will not be able to boot.
-====
-
-**--lz4**::
-    Compress the generated initramfs using lz4.
-[WARNING]
-====
-Make sure your kernel has lz4 decompression support compiled in, otherwise you
-will not be able to boot.
-====
-
-**--zstd**::
-    Compress the generated initramfs using Zstandard.
-[WARNING]
-====
-Make sure your kernel has zstd decompression support compiled in, otherwise you
-will not be able to boot.
-====
-
-**--compress** _<compressor>_::
-    Compress the generated initramfs using the passed compression program. If
-    you pass it just the name of a compression program, it will call that
-    program with known-working arguments. If you pass a quoted string with
-    arguments, it will be called with exactly those arguments. Depending on what
-    you pass, this may result in an initramfs that the kernel cannot decompress.
-    The default value can also be set via the _INITRD_COMPRESS_ environment variable.
-
-**--no-compress**::
-    Do not compress the generated initramfs. This will override any other
-    compression options.
-
-**--reproducible**::
-    Create reproducible images.
-
-**--no-reproducible**::
-    Do not create reproducible images.
-
-**--list-modules**::
-    List all available dracut modules.
-
-**-M, --show-modules**::
-    Print included module's name to standard output during build.
-
-**--keep**::
-    Keep the initramfs temporary directory for debugging purposes.
-
-**--printsize**::
-    Print out the module install size
-
-**--profile**:
-    Output profile information of the build process
-
-**--ro-mnt**:
-    Mount / and /usr read-only by default.
-
-**-L, --stdlog** _<level>_::
-    [0-6] Specify logging level (to standard error)
-----
-          0 - suppress any messages
-          1 - only fatal errors
-          2 - all errors
-          3 - warnings
-          4 - info
-          5 - debug info (here starts lots of output)
-          6 - trace info (and even more)
-----
-
-**--regenerate-all**::
-    Regenerate all initramfs images at the default location with the kernel
-    versions found on the system. Additional parameters are passed through.
-
-**--loginstall _<DIR>_**::
-    Log all files installed from the host to _<DIR>_.
-
-**--uefi**::
-    Instead of creating an initramfs image, dracut will create an UEFI executable,
-    which can be executed by an UEFI BIOS. The default output filename is
-    _<EFI>/EFI/Linux/linux-$kernel$-<MACHINE_ID>-<BUILD_ID>.efi_. <EFI> might be
-    _/efi_, _/boot_ or _/boot/efi_ depending on where the ESP partition is mounted.
-    The <BUILD_ID> is taken from BUILD_ID in _/usr/lib/os-release_ or if it exists
-    _/etc/os-release_ and is left out, if BUILD_ID is non-existant or empty.
-
-**--no-machineid**::
-    affects the default output filename of **--uefi** and will discard the <MACHINE_ID>
-    part.
-
-**--uefi-stub _<FILE>_**::
-    Specifies the UEFI stub loader, which will load the attached kernel, initramfs and
-    kernel command line and boots the kernel. The default is
-    _$prefix/lib/systemd/boot/efi/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
-    or _$prefix/lib/gummiboot/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
-
-**--kernel-image _<FILE>_**::
-    Specifies the kernel image, which to include in the UEFI executable. The default is
-    _/lib/modules/<KERNEL-VERSION>/vmlinuz_ or _/boot/vmlinuz-<KERNEL-VERSION>_
-
-ENVIRONMENT
------------
-
-_INITRD_COMPRESS_::
-    sets the default compression program. See **--compress**.
-
-FILES
------
-_/var/log/dracut.log_::
-    logfile of initramfs image creation
-
-_/tmp/dracut.log_::
-    logfile of initramfs image creation, if _/var/log/dracut.log_ is not
-    writable
-
-_/etc/dracut.conf_::
-    see dracut.conf5
-
-_/etc/dracut.conf.d/*.conf_::
-    see dracut.conf5
-
-_/usr/lib/dracut/dracut.conf.d/*.conf_::
-    see dracut.conf5
-
-Configuration in the initramfs
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-_/etc/conf.d/_::
-    Any files found in _/etc/conf.d/_ will be sourced in the initramfs to
-    set initial values. Command line options will override these values
-    set in the configuration files.
-
-_/etc/cmdline_::
-    Can contain additional command line options. Deprecated, better use
-    /etc/cmdline.d/*.conf.
-
-_/etc/cmdline.d/*.conf_::
-    Can contain additional command line options.
-
-AVAILABILITY
-------------
-The dracut command is part of the dracut package and is available from
-link:$$https://dracut.wiki.kernel.org$$[https://dracut.wiki.kernel.org]
-
-AUTHORS
--------
-Harald Hoyer
-
-Victor Lowther
-
-Philippe Seewer
-
-Warren Togami
-
-Amadeusz Żołnowski
-
-Jeremy Katz
-
-David Dillow
-
-Will Woods
-
-SEE ALSO
---------
-*dracut.cmdline*(7) *dracut.conf*(5) *lsinitrd*(1)

dracut.asc

@@ -1,185 +0,0 @@
-dracut
-======
-Harald Hoyer <harald@redhat.com>
-v3.0, October 2013
-
-:language: bash
-
-= Introduction
-This section is a modified version of
-http://en.wikipedia.org/wiki/Initrd which is licensed under the
-Creative Commons Attribution/Share-Alike License.
-
-== Definition
-An _initial ramdisk_ is a temporary file system used in the boot process of the
-Linux kernel. _initrd_ and _initramfs_ refer to slightly different schemes for
-loading this file system into memory. Both are commonly used to make
-preparations before the real root file system can be mounted.
-
-== Rationale
-Many Linux distributions ship a single, generic kernel image that is intended to
-boot as wide a variety of hardware as possible. The device drivers for this
-generic kernel image are included as loadable modules, as it is not possible to
-statically compile them all into the one kernel without making it too large to
-boot from computers with limited memory or from lower-capacity media like floppy
-disks.
-
-This then raises the problem of detecting and loading the modules necessary to
-mount the root file system at boot time (or, for that matter, deducing where or
-what the root file system is).
-
-To further complicate matters, the root file system may be on a software RAID
-volume, LVM, NFS (on diskless workstations), or on an encrypted partition. All
-of these require special preparations to mount.
-
-Another complication is kernel support for hibernation, which suspends the
-computer to disk by dumping an image of the entire system to a swap partition or
-a regular file, then powering off. On next boot, this image has to be made
-accessible before it can be loaded back into memory.
-
-To avoid having to hardcode handling for so many special cases into the kernel,
-an initial boot stage with a temporary root file system
-—now dubbed early user space— is used.  This root file system would contain
-user-space helpers that would do the hardware detection, module loading and
-device discovery necessary to get the real root file system mounted.
-
-== Implementation
-An image of this initial root file system (along with the kernel image) must be
-stored somewhere accessible by the Linux bootloader or the boot firmware of the
-computer. This can be:
-
-* The root file system itself
-* A boot image on an optical disc
-* A small ext2/ext3 or FAT-formatted partition on a local disk
-  (a _boot partition_)
-* A TFTP server (on systems that can boot from Ethernet)
-
-The bootloader will load the kernel and initial root file system image into
-memory and then start the kernel, passing in the memory address of the image.
-
-Depending on which algorithms were compiled statically into it, the kernel can
-currently unpack initrd/initramfs images compressed with gzip, bzip2 and LZMA.
-
-== Mount preparations
-dracut can generate a customized initrams image which contains only whatever is
-necessary to boot some particular computer, such as ATA, SCSI and filesystem
-kernel modules (host-only mode).
-
-dracut can also generate a more generic initramfs image (default mode).
-
-dracut's initramfs starts only with the device name of the root file system (or
-its UUID) and must discover everything else at boot time. A complex cascade of
-tasks must be performed to get the root file system mounted:
-
-* Any hardware drivers that the boot process depends on must be loaded. All
-kernel modules for common storage devices are packed onto the initramfs and then
-udev pulls in modules matching the computer's detected hardware.
-
-* On systems which display a boot rd.splash screen, the video hardware must be
-initialized and a user-space helper started to paint animations onto the display
-in lockstep with the boot process.
-
-* If the root file system is on NFS, dracut does then:
-** Bring up the primary network interface.
-** Invoke a DHCP client, with which it can obtain a DHCP lease.
-** Extract the name of the NFS share and the address of the NFS server from the
-lease.
-** Mount the NFS share.
-
-* If the root file system appears to be on a software RAID device, there is no
-way of knowing which devices the RAID volume spans; the standard MD utilities
-must be invoked to scan all available block devices with a raid signature and
-bring the required ones online.
-
-* If the root file system appears to be on a logical volume, the LVM utilities
-must be invoked to scan for and activate the volume group containing it.
-
-* If the root file system is on an encrypted block device:
-** Invoke a helper script to prompt the user to type in a passphrase and/or
-insert a hardware token (such as a smart card or a USB security dongle).
-
-* Create a decryption target with the device mapper.
-
-dracut uses udev, an event-driven hotplug agent, which invokes helper programs
-as hardware devices, disk partitions and storage volumes matching certain rules
-come online. This allows discovery to run in parallel, and to progressively
-cascade into arbitrary nestings of LVM, RAID or encryption to get at the root
-file system.
-
-When the root file system finally becomes visible:
-
-* Any maintenance tasks which cannot run on a mounted root file system
-are done.
-* The root file system is mounted read-only.
-* Any processes which must continue running (such as the rd.splash screen helper
-and its command FIFO) are hoisted into the newly-mounted root file system.
-
-The final root file system cannot simply be mounted over /, since that would
-make the scripts and tools on the initial root file system inaccessible for any
-final cleanup tasks. On an initramfs, the initial root file system cannot be
-rotated away. Instead, it is simply emptied and the final root file system
-mounted over the top.
-
-If the systemd module is used in the initramfs, the ordering of the services
-started looks like <<dracutbootup7>>.
-
-== Dracut on shutdown
-
-On a systemd driven system, the dracut initramfs is also used for the shutdown
-procedure.
-
-The following steps are executed during a shutdown:
-
-* systemd switches to the shutdown.target
-* systemd starts
-  $prefix/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
-* dracut-shutdown.service executes /usr/lib/dracut/dracut-initramfs-restore
-  which unpacks the initramfs to /run/initramfs
-* systemd finishes shutdown.target
-* systemd kills all processes
-* systemd tries to unmount everything and mounts the remaining read-only
-* systemd checks, if there is a /run/initramfs/shutdown executable
-* if yes, it does a pivot_root to /run/initramfs and executes ./shutdown.
-  The old root is then mounted on /oldroot.
-  /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable.
-* shutdown will try to umount every /oldroot mount and calls the various
-  shutdown hooks from the dracut modules
-
-This ensures, that all devices are disassembled and unmounted cleanly.
-
-= User Manual
-
-:leveloffset: 1
-include::dracut.8.asc[]
-
-:leveloffset: 1
-[[dracutconf5]]
-include::dracut.conf.5.asc[]
-
-[[dracutcmdline7]]
-include::dracut.cmdline.7.asc[]
-
-[[lsinitrd1]]
-include::lsinitrd.1.asc[]
-
-[[mkinitrd8]]
-include::mkinitrd.8.asc[]
-
-= Developer Manual
-
-:leveloffset: 1
-[[dracutmodules7]]
-include::dracut.modules.7.asc[]
-
-[[dracutbootup7]]
-include::dracut.bootup.7.asc[]
-
-:leveloffset: 0
-[appendix]
-License
--------
-This work is licensed under the Creative Commons Attribution/Share-Alike
-License. To view a copy of this license, visit
-http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Creative
-Commons, 559 Nathan Abbott Way, Stanford, California 94305, USA.
-

dracut.bootup.7.asc

@@ -1,123 +0,0 @@
-DRACUT.BOOTUP(7)
-================
-:doctype: manpage
-:man source:   dracut
-:man manual:   dracut
-
-NAME
-----
-dracut.bootup - boot ordering in the initramfs
-
-DESCRIPTION
------------
-
-This flow chart illustrates the ordering of the services, if systemd is used in
-the dracut initramfs.
-----
-
-                                    systemd-journal.socket
-                                               |
-                                               v
-                                    dracut-cmdline.service
-                                               |
-                                               v
-                                    dracut-pre-udev.service
-                                               |
-                                               v
-                                     systemd-udevd.service
-                                               |
-                                               v
-local-fs-pre.target                dracut-pre-trigger.service
-         |                                     |
-         v                                     v
- (various mounts)  (various swap  systemd-udev-trigger.service
-         |           devices...)               |             (various low-level   (various low-level
-         |               |                     |             services: seed,       API VFS mounts:
-         v               v                     v             tmpfiles, random     mqueue, configfs,
-  local-fs.target   swap.target     dracut-initqueue.service    sysctl, ...)        debugfs, ...)
-         |               |                     |                    |                    |
-         \_______________|____________________ | ___________________|____________________/
-                                              \|/
-                                               v
-                                        sysinit.target
-                                               |
-                             _________________/|\___________________
-                            /                  |                    \
-                            |                  |                    |
-                            v                  |                    v
-                        (various               |              rescue.service
-                       sockets...)             |                    |
-                            |                  |                    v
-                            v                  |              rescue.target
-                     sockets.target            |
-                            |                  |
-                            \_________________ |                                 emergency.service
-                                              \|                                         |
-                                               v                                         v
-                                         basic.target                             emergency.target
-                                               |
-                        ______________________/|
-                       /                       |
-                       |                       v
-                       |            dracut-pre-mount.service
-                       |                       |
-                       |                       v
-                       |                  sysroot.mount
-                       |                       |
-                       |                       v
-                       |             initrd-root-fs.target
-           (custom initrd services)            |
-                       |                       v
-                       |             dracut-mount.service
-                       |                       |
-                       |                       v
-                       |            initrd-parse-etc.service
-                       |                       |
-                       |                       v
-                       |            (sysroot-usr.mount and
-                       |             various mounts marked
-                       |               with fstab option
-                       |                x-initrd.mount)
-                       |                       |
-                       |                       v
-                       |                initrd-fs.target
-                       \______________________ |
-                                              \|
-                                               v
-                                          initrd.target
-                                               |
-                                               v
-                                    dracut-pre-pivot.service
-                                               |
-                                               v
-                                     initrd-cleanup.service
-                                          isolates to
-                                    initrd-switch-root.target
-                                               |
-                                               v
-                        ______________________/|
-                       /                       |
-                       |        initrd-udevadm-cleanup-db.service
-                       |                       |
-           (custom initrd services)            |
-                       |                       |
-                       \______________________ |
-                                              \|
-                                               v
-                                   initrd-switch-root.target
-                                               |
-                                               v
-                                   initrd-switch-root.service
-                                               |
-                                               v
-                                          switch-root
-----
-
-
-AUTHOR
-------
-Harald Hoyer
-
-SEE ALSO
---------
-*dracut*(8) *bootup*(7)

dracut.conf

@@ -1,3 +1,26 @@
-# PUT YOUR CONFIG IN separate files
-# in /etc/dracut.conf.d named "<name>.conf"
-# SEE man dracut.conf(5) for options
+# Sample dracut config file
+
+# Specific list of dracut modules to use
+#dracutmodules+=""
+
+# Dracut modules to omit
+#omit_dracutmodules+=""
+
+# Dracut modules to add to the default
+#add_dracutmodules+=""
+
+# additional kernel modules to the default
+#add_drivers+=""
+
+# list of kernel filesystem modules to be included in the generic initramfs
+#filesystems+=""
+
+# build initrd only to boot current hardware
+#hostonly="yes"
+#
+
+# install local /etc/mdadm.conf
+mdadmconf="yes"
+
+# install local /etc/lvm/lvm.conf
+lvmconf="yes"

dracut.conf.5

@@ -0,0 +1,78 @@
+.TH DRACUT.CONF 5 "NOV 2009" "Linux"
+.SH NAME
+dracut.conf \- configuration file for dracut
+
+.SH SYNOPSIS
+\fB/etc/dracut.conf\fR
+
+.SH DESCRIPTION
+.B dracut.conf
+is loaded during the initialisation phase of dracut.
+Command line parameter will overwrite any values set here.
+
+.SH OPTIONS
+.TP
+.BR dracutmodules+= \%"\ [LIST]\ "
+Specify a space-separated list of dracut modules to
+call when building the initramfs. Modules are located
+in /usr/share/dracut/modules.d.
+.TP
+.BR omit_dracutmodules+= \%"\ [LIST]\ "
+Omit a space-separated list of dracut modules.
+.TP
+.BR add_dracutmodules+= \%"\ [LIST]\ "
+Add a space-separated list of dracut modules.
+.TP
+.BR drivers+= \%"\ [LIST]\ "
+Specify a space-separated list of kernel modules to
+exclusively include in the initramfs.
+The kernel modules have to be specified without the ".ko" suffix.
+.TP
+.BR add_drivers+= \%"\ [LIST]\ "
+Specify a space-separated list of kernel 
+modules to add to the initramfs.
+The kernel modules have to be specified without the ".ko" suffix.
+.TP
+.BR omit_drivers+= \%"\ [LIST]\ "
+Specify a space-separated list of kernel 
+modules to omit from the initramfs.
+The kernel modules have to be specified without the ".ko" suffix.
+Regular expressions are also allowed like ".*/fs/foo/.* .*/fs/bar/.*".
+.TP
+.BR filesystems+= \%"\ [LIST]\ "
+Specify a space-separated list of kernel filesystem
+modules to exclusively include in the generic
+initramfs.
+.TP
+.BR drivers_dir= \%"<dir>"
+Specify the directory, where to look for kernel modules
+.TP
+.BR fw_dir+= \%":<dir>[:<dir>\ ...]"
+Specify additional directories, where to look for firmwares, separated by :
+.TP
+.BR do_strip= \%"yes|no"
+Strip binaries in the initramfs (default=yes)
+.TP
+.BR hostonly= \%"yes|no"
+Host-Only mode: Install only what is needed for booting 
+the local host instead of a generic host.
+.TP
+.BR mdadmconf= \%"yes|no"
+Include local /etc/mdadm.conf (default=yes)
+.TP
+.BR lvmconf= \%"yes|no"
+Include local /etc/lvm/lvm.conf (default=yes)
+.TP
+.BR kernel_only= \%"yes|no"
+Only install kernel drivers and firmware files. (default=no)
+.TP
+.BR no_kernel= \%"yes|no"
+Do not install kernel drivers and firmware files (default=no)
+.TP
+\fBinstall_items+=\fR"\ \&\fI<file>\fR[ \fI<file>\fR\ \&\&...]\ \&"
+
+Specify additional files to include in the initramfs, separated by spaces.
+
+.SH SEE ALSO
+.BR dracut (8)
+

dracut.conf.5.asc

@@ -1,229 +0,0 @@
-DRACUT.CONF(5)
-==============
-:doctype: manpage
-:man source:   dracut
-:man manual:   dracut
-
-NAME
-----
-dracut.conf - configuration file(s) for dracut
-
-SYNOPSIS
---------
-_/etc/dracut.conf_
-_/etc/dracut.conf.d/\*.conf_
-_/usr/lib/dracut/dracut.conf.d/*.conf_
-
-Description
------------
-_dracut.conf_ is loaded during the initialisation phase of dracut. Command line
-parameter will override any values set here.
-
-_*.conf_ files are read from /usr/lib/dracut/dracut.conf.d and
-/etc/dracut.conf.d. Files with the same name in /etc/dracut.conf.d will replace
-files in /usr/lib/dracut/dracut.conf.d.
-The files are then read in alphanumerical order and will override parameters
-set in _/etc/dracut.conf_. Each line specifies an attribute and a value. A '#'
-indicates the beginning of a comment; following characters, up to the end of the
-line are not interpreted.
-
-dracut command line options will override any values set here.
-
-Configuration files must have the extension .conf; other extensions are ignored.
-
-*add_dracutmodules+=*" __<dracut modules>__ "::
-    Add a space-separated list of dracut modules to call when building the
-    initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
-
-*dracutmodules+=*" __<dracut modules>__ "::
-    Specify a space-separated list of dracut modules to call when building the
-    initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
-    This option forces dracut to only include the specified dracut modules.
-    In most cases the "add_dracutmodules" option is what you want to use.
-
-*omit_dracutmodules+=*" __<dracut modules>__ "::
-    Omit a space-separated list of dracut modules to call when building the
-    initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
-
-*drivers+=*" __<kernel modules>__ "::
-    Specify a space-separated list of kernel modules to exclusively include in
-    the initramfs. The kernel modules have to be specified without the ".ko"
-    suffix.
-
-*add_drivers+=*" __<kernel modules>__ "::
-    Specify a space-separated list of kernel modules to add to the initramfs.
-    The kernel modules have to be specified without the ".ko" suffix.
-
-*force_drivers+=*" __<list of kernel modules>__ "::
-    See add_drivers above. But in this case it is ensured that the drivers
-    are tried to be loaded early via modprobe.
-
-*omit_drivers+=*" __<kernel modules>__ "::
-    Specify a space-separated list of kernel modules not to add to the
-    initramfs. The kernel modules have to be specified without the ".ko" suffix.
-
-*filesystems+=*" __<filesystem names>__ "::
-    Specify a space-separated list of kernel filesystem modules to exclusively
-    include in the generic initramfs.
-
-*drivers_dir=*"__<kernel modules directory>__"::
-    Specify the directory, where to look for kernel modules
-
-*fw_dir+=*" :__<dir>__[:__<dir>__ ...] "::
-    Specify additional directories, where to look for firmwares, separated by :
-
-*install_items+=*" __<file>__[ __<file>__ ...] "::
-    Specify additional files to include in the initramfs, separated by spaces.
-
-*install_optional_items+=*" __<file>__[ __<file>__ ...] "::
-    Specify additional files to include in the initramfs, separated by spaces,
-    if they exist.
-
-*compress=*"__{bzip2|lzma|xz|gzip|lzo|lz4|zstd|<compressor [args ...]>}__"::
-    Compress the generated initramfs using the passed compression program. If
-    you pass it just the name of a compression program, it will call that
-    program with known-working arguments. If you pass arguments, it will be called
-    with exactly those arguments. Depending on what you pass, this may result in
-    an initramfs that the kernel cannot decompress.
-
-*do_strip=*"__{yes|no}__"::
-    Strip binaries in the initramfs (default=yes)
-
-*hostonly=*"__{yes|no}__"::
-    Host-Only mode: Install only what is needed for booting the local host
-    instead of a generic host and generate host-specific configuration.
-
-*hostonly_cmdline=*"__{yes|no}__"::
-    If set to "yes", store the kernel command line arguments needed in the initramfs
-
-*persistent_policy=*"__<policy>__"::
-    Use _<policy>_ to address disks and partitions.
-    _<policy>_ can be any directory name found in /dev/disk.
-    E.g. "by-uuid", "by-label"
-
-*tmpdir=*"__<temporary directory>__"::
-    Specify temporary directory to use.
-
-[WARNING]
-====
-If chrooted to another root other than the real root device, use --fstab and
-provide a valid _/etc/fstab_.
-====
-
-*use_fstab=*"__{yes|no}__"::
-    Use _/etc/fstab_ instead of _/proc/self/mountinfo_.
-
-*add_fstab+=*" __<filename>__ "::
-    Add entries of __<filename>__ to the initramfs /etc/fstab.
-
-*add_device+=*" __<device>__ "::
-    Bring up _<device>_ in initramfs, _<device>_ should be the device name.
-    This can be useful in hostonly mode for resume support when your swap is on
-    LVM an encrypted partition.
-
-*mdadmconf=*"__{yes|no}__"::
-    Include local _/etc/mdadm.conf_ (default=yes)
-
-*lvmconf=*"__{yes|no}__"::
-    Include local _/etc/lvm/lvm.conf_ (default=yes)
-
-*fscks=*" __<fsck tools>__ "::
-    Add a space-separated list of fsck tools. If nothing is specified, the
-    default is: "umount mount /sbin/fsck* xfs_db xfs_check xfs_repair e2fsck
-    jfs_fsck reiserfsck btrfsck". The installation is opportunistic
-    (non-existing tools are ignored).
-
-*nofscks=*"__{yes|no}__"::
-    If specified, inhibit installation of any fsck tools.
-
-*ro_mnt=*"__{yes|no}__"::
-    Mount _/_ and _/usr_ read-only by default.
-
-*kernel_cmdline=*"__parameters__"::
-    Specify default kernel command line parameters
-
-*kernel_only=*"__{yes|no}__"::
-    Only install kernel drivers and firmware files. (default=no)
-
-*no_kernel=*"__{yes|no}__"::
-    Do not install kernel drivers and firmware files (default=no)
-
-*acpi_override=*"__{yes|no}__"::
-    [WARNING] ONLY USE THIS IF YOU KNOW WHAT YOU ARE DOING! +
-    Override BIOS provided ACPI tables. For further documentation read
-    Documentation/acpi/initrd_table_override.txt in the kernel sources.
-    Search for ACPI table files (must have .aml suffix) in acpi_table_dir=
-    directory (see below) and add them to a separate uncompressed cpio
-    archive. This cpio archive gets glued (concatenated, uncompressed one
-    must be the first one) to the compressed cpio archive. The first,
-    uncompressed cpio archive is for data which the kernel must be able
-    to access very early (and cannot make use of uncompress alogrithms yet)
-    like microcode or ACPI tables (default=no).
-
-*acpi_table_dir=*"__<dir>__"::
-    Directory to search for ACPI tables if acpi_override= is set to yes.
-
-*early_microcode=*"{yes|no}"::
-    Combine early microcode with ramdisk (default=yes)
-
-*stdloglvl*="__\{0-6\}__"::
-    Set logging to standard error level.
-
-*sysloglvl*="__\{0-6\}__"::
-    Set logging to syslog level.
-
-*fileloglvl=*"__\{0-6\}__"::
-    Set logging to file level.
-
-*logfile=*"__<file>__"::
-    Path to log file.
-
-*show_modules=*"__{yes|no}__"::
-    Print the name of the included modules to standard output during build.
-
-*i18n_vars=*"__<variable mapping>__"::
-    Distribution specific variable mapping.
-    See dracut/modules.d/10i18n/README for a detailed description.
-
-*i18n_default_font=*"__<fontname>__"::
-    The font <fontname> to install, if not specified otherwise.
-    Default is "LatArCyrHeb-16".
-
-*i18n_install_all=*"__{yes|no}__"::
-    Install everything regardless of generic or hostonly mode.
-
-*reproducible=*"__{yes|no}__"::
-    Create reproducible images.
-
-*loginstall=*"__<DIR>__"::
-    Log all files installed from the host to _<DIR>_.
-
-*uefi_stub=*"_<FILE>_"::
-    Specifies the UEFI stub loader, which will load the attached kernel, initramfs and
-    kernel command line and boots the kernel. The default is
-    _/lib/systemd/boot/efi/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
-    or _/usr/lib/gummiboot/linux<EFI-MACHINE-TYPE-NAME>.efi.stub_
-
-*kernel_image=*"_<FILE>_"::
-    Specifies the kernel image, which to include in the UEFI executable. The default is
-    _/lib/modules/<KERNEL-VERSION>/vmlinuz_ or _/boot/vmlinuz-<KERNEL-VERSION>_
-
-Files
------
-_/etc/dracut.conf_::
-    Old configuration file. You better use your own file in
-    _/etc/dracut.conf.d/_.
-
-_/etc/dracut.conf.d/_::
-    Any _/etc/dracut.conf.d/*.conf_ file can override the values in
-    _/etc/dracut.conf_. The configuration files are read in alphanumerical
-    order.
-
-AUTHOR
-------
-Harald Hoyer
-
-See Also
---------
-*dracut*(8) *dracut.cmdline*(7)
-

dracut.conf.d/fedora.conf.example

@@ -1,20 +0,0 @@
-# dracut config file customized for RedHat/Fedora.
-
-# i18n
-i18n_vars="/etc/sysconfig/keyboard:KEYTABLE-KEYMAP /etc/sysconfig/i18n:SYSFONT-FONT,FONTACM-FONT_MAP,FONT_UNIMAP"
-i18n_default_font="eurlatgr"
-i18n_install_all="yes"
-
-
-stdloglvl=3
-sysloglvl=5
-install_optional_items+=" vi /etc/virc ps grep cat rm "
-prefix="/"
-systemdutildir=/usr/lib/systemd
-systemdsystemunitdir=/usr/lib/systemd/system
-systemdsystemconfdir=/etc/systemd/system
-udevdir=/usr/lib/udev
-hostonly="yes"
-hostonly_cmdline="no"
-early_microcode="yes"
-reproducible="yes"

dracut.conf.d/fips.conf.example

@@ -1,3 +0,0 @@
-# turn on fips module
-
-add_dracutmodules+=" fips "

dracut.conf.d/gentoo-systemd.conf.example

@@ -1,5 +0,0 @@
-# /etc/dracut.conf.d/gentoo-systemd.conf
-
-# Paths of systemd dirs on Gentoo
-systemdutildir=/usr/lib/systemd
-systemdsystemunitdir=/usr/lib/systemd/system

dracut.conf.d/gentoo.conf.example

@@ -1,15 +0,0 @@
-# /etc/dracut.conf.d/gentoo.conf
-# dracut config file customized for Gentoo Base System release 2
-
-udevdir=/lib/udev
-ro_mnt=yes
-
-#
-# Modules
-#
-
-# i18n
-i18n_vars="/etc/conf.d/keymaps:keymap-KEYMAP,extended_keymaps-EXT_KEYMAPS /etc/conf.d/consolefont:consolefont-FONT,consoletranslation-FONT_MAP /etc/rc.conf:unicode-UNICODE"
-i18n_default_font="LatArCyrHeb-16"
-
-omit_drivers+=" i2o_scsi"

dracut.conf.d/suse.conf.example

@@ -1,24 +0,0 @@
-# SUSE specifc dracut settings
-#
-# SUSE by default always builds a as small as possible initrd for performance
-# and resource reasons.
-# If you like to build a generic initrd which works on other platforms than
-# on the one dracut/mkinitrd got called comment out below setting(s).
-hostonly="yes"
-hostonly_cmdline="yes"
-
-compress="xz -0 --check=crc32 --memlimit-compress=50%"
-
-i18n_vars="/etc/sysconfig/language:RC_LANG-LANG,RC_LC_ALL-LC_ALL /etc/sysconfig/console:CONSOLE_UNICODEMAP-FONT_UNIMAP,CONSOLE_FONT-FONT,CONSOLE_SCREENMAP-FONT_MAP /etc/sysconfig/keyboard:KEYTABLE-KEYMAP"
-omit_drivers+=" i2o_scsi"
-
-# Below adds additional tools to the initrd which are not urgently necessary to
-# bring up the system, but help to debug problems.
-# See /usr/lib/dracut/modules.d/95debug/module-setup.sh which additional tools
-# are installed and add more if you need them. This specifically helps if you
-# use:
-# rd.break=[cmdline|pre-udev|pre-trigger|initqueue|pre-mount|
-# mount|pre-pivot|cleanup]
-# boot parameter or if you are forced to enter the dracut emergency shell.
-
-# add_dracutmodules+=debug

dracut.logrotate

@@ -1,6 +1,9 @@
 /var/log/dracut.log {
     missingok
     notifempty
-    size 30k
+    compress
+    delaycompress
+    copytruncate
+    size 1M
     create 0600 root root
 }

dracut.modules.7.asc

@@ -1,301 +0,0 @@
-DRACUT.MODULES(7)
-=================
-:doctype: manpage
-:man source:   dracut
-:man manual:   dracut
-
-NAME
-----
-dracut.modules - dracut modules
-
-DESCRIPTION
------------
-
-dracut uses a modular system to build and extend the initramfs image. All
-modules are located in _/usr/lib/dracut/modules.d_ or in _<git-src>/modules.d_.
-The most basic dracut module is _99base_. In _99base_ the initial shell script
-init is defined, which gets run by the kernel after initramfs loading. Although
-you can replace init with your own version of _99base_, this is not encouraged.
-Instead you should use, if possible, the hooks of dracut. All hooks, and the
-point of time in which they are executed, are described in <<stages>>.
-
-The main script, which creates the initramfs is dracut itself. It parses all
-arguments and sets up the directory, in which everything is installed. It then
-executes all check, install, installkernel scripts found in the modules, which
-are to be processed. After everything is installed, the install directory is
-archived and compressed to the final initramfs image. All helper functions used
-by check, install and installkernel are found in in the file _dracut-functions_.
-These shell functions are available to all module installer (install,
-installkernel) scripts, without the need to source _dracut-functions_.
-
-A module can check the preconditions for install and installkernel with the
-check script. Also dependencies can be expressed with check. If a module passed
-check, install and installkernel will be called to install all of the necessary
-files for the module. To split between kernel and non-kernel parts of the
-installation, all kernel module related parts have to be in installkernel. All
-other files found in a module directory are module specific and mostly are hook
-scripts and udev rules.
-
-
-[[stages]]
-== Boot Process Stages
-
-dracut modules can insert custom script at various points, to control the boot
-process.
-These hooks are plain directories containing shell scripts ending with ".sh",
-which are sourced by init.
-Common used functions are in _dracut-lib.sh_, which can be sourced by any script.
-
-=== Hook: cmdline
-
-The _cmdline_ hook is a place to insert scripts to parse the kernel command line
-and prepare the later actions, like setting up udev rules and configuration
-files.
-
-In this hook the most important environment variable is defined: root. The
-second one is rootok, which indicates, that a module claimed to be able to parse
-the root defined. So for example, **root=**__iscsi:....__ will be claimed by the
-iscsi dracut module, which then sets rootok.
-
-=== Hook: pre-udev
-
-This hook is executed right after the cmdline hook and a check if root and
-rootok were set. Here modules can take action with the final root, and before
-udev has been run.
-
-=== Start Udev
-
-Now udev is started and the logging for udev is setup.
-
-=== Hook: pre-trigger
-
-In this hook, you can set udev environment variables with **udevadm control
---property=KEY=_value_** or control the further execution of udev with
-udevadm.
-
-=== Trigger Udev
-
-udev is triggered by calling udevadm trigger, which sends add events for all
-devices and subsystems.
-
-=== Main Loop
-
-In the main loop of dracut loops until udev has settled and
-all scripts in _initqueue/finished_ returned true.
-In this loop there are three hooks, where scripts can be inserted
-by calling /sbin/initqueue.
-
-==== Initqueue
-
-This hook gets executed every time a script is inserted here, regardless of the
-udev state.
-
-==== Initqueue settled
-
-This hooks (initqueue/settled) gets executed every time udev has settled.
-
-==== Initqueue timeout
-
-This hooks (initqueue/timeout) gets executed, when the main loop counter becomes
-half of the rd.retry counter.
-
-==== Initqueue finished
-
-This hook (initqueue/finished) is called after udev has settled and
-if all scripts herein return 0 the main loop will be ended.
-Abritary scripts can be added here, to loop in the
-initqueue until something happens, which a dracut module wants to wait for.
-
-=== Hook: pre-mount
-
-Before the root device is mounted all scripts in the hook pre-mount are
-executed. In some cases (e.g. NFS) the real root device is already mounted,
-though.
-
-=== Hook: mount
-
-This hook is mainly to mount the real root device.
-
-=== Hook: pre-pivot
-
-This hook is called before cleanup hook, This is a good place for
-actions other than cleanups which need to be called before pivot.
-
-=== Hook: cleanup
-
-This hook is the last hook and is called before init finally switches root to
-the real root device. This is a good place to clean up and kill processes not
-needed anymore.
-
-
-=== Cleanup and switch_root
-
-Init (or systemd) kills all udev processes, cleans up the environment,
-sets up the arguments for the real init process and finally calls switch_root.
-switch_root removes the whole filesystem hierarchy of the initramfs,
-chroot()s to the real root device and calls /sbin/init with the specified
-arguments.
-
-To ensure all files in the initramfs hierarchy can be removed, all processes
-still running from the initramfs should not have any open file descriptors left.
-
-== Network Infrastructure
-
-FIXME
-
-== Writing a Module
-
-A simple example module is _96insmodpost_, which modprobes a kernel module after
-udev has settled and the basic device drivers have been loaded.
-
-All module installation information is in the file module-setup.sh.
-
-First we create a check() function, which just exits with 0 indicating that this
-module should be included by default.
-
-check():
-----
-return 0
-----
-
-The we create the install() function, which installs a cmdline hook with
-priority number 20 called _parse-insmodpost.sh_. It also installs the
-_insmodpost.sh_ script in _/sbin_.
-
-install():
-----
-inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
-inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
-----
-
-The _parse-instmodpost.sh_ parses the kernel command line for a argument
-rd.driver.post, blacklists the module from being autoloaded and installs the
-hook _insmodpost.sh_ in the _initqueue/settled_.
-
-_parse-insmodpost.sh_:
-----
-for p in $(getargs rd.driver.post=); do
-    echo "blacklist $p" >> /etc/modprobe.d/initramfsblacklist.conf
-    _do_insmodpost=1
-done
-
-[ -n "$_do_insmodpost" ] && /sbin/initqueue --settled --unique --onetime /sbin/insmodpost.sh
-unset _do_insmodpost
-
-----
-
-_insmodpost.sh_, which is called in the _initqueue/settled_ hook will just
-modprobe the kernel modules specified in all rd.driver.post kernel command line
-parameters. It runs after udev has settled and is only called once (--onetime).
-
-_insmodpost.sh_:
-----
-. /lib/dracut-lib.sh
-
-for p in $(getargs rd.driver.post=); do
-    modprobe $p
-done
-
-----
-
-
-=== module-setup.sh: check()
-
-_check()_ is called by dracut to evaluate the inclusion of a dracut module in
-the initramfs.
-
-$hostonly:: If the $hostonly variable is set, then the module check() function
-should be in "hostonly" mode, which means, that the check() should only return
-0, if the module is really needed to boot this specific host.
-
-check() should return with:
-
-0:: Include the dracut module in the initramfs.
-
-1:: Do not include the dracut module. The requirements are not fulfilled
-(missing tools, etc.)
-
-255:: Only include the dracut module, if another module requires it or if
-explicitly specified in the config file or on the argument list.
-
-
-=== module-setup.sh: depends()
-
-The function depends() should echo all other dracut module names the module
-depends on.
-
-=== module-setup.sh: cmdline()
-
-This function should print the kernel command line options needed to boot the
-current machine setup. It should start with a space and should not print a
-newline.
-
-=== module-setup.sh: install()
-
-The install() function is called to install everything non-kernel related.
-To install binaries, scripts, and other files, you can use the functions
-mentioned in <<creation>>.
-
-To address a file in the current module directory, use the variable "$moddir".
-
-=== module-setup.sh: installkernel()
-
-In installkernel() all kernel related files should be installed. You can use all
-of the functions mentioned in <<creation>> to install files.
-
-=== [[creation]]Creation Functions
-
-==== inst_multiple [-o] <file> [ <file> ...]
-
-installs multiple binaries and files. If executables are specified without a
-path, dracut will search the path PATH=/usr/sbin:/sbin:/usr/bin:/bin for the
-binary. If the option "-o" is given as the first parameter, a missing file does
-not lead to an error.
-
-==== inst <src> [<dst>]
-
-installs _one_ file <src> either to the same place in the initramfs or to an
-optional <dst>. inst with more than two arguments is treated the same as
-inst_multiple, all arguments are treated as files to install and none as
-install destinations.
-
-==== inst_hook <hookdir> <prio> <src>
-
-installs an executable/script <src> in the dracut hook <hookdir> with priority
-<prio>.
-
-==== inst_rules <udevrule> [ <udevrule> ...]
-
-installs one ore more udev rules. Non-existant udev rules are reported, but do
-not let dracut fail.
-
-==== instmods <kernelmodule> [ <kernelmodule> ... ]
-
-instmods should be used only in the installkernel() function.
-
-instmods installs one or more kernel modules in the initramfs. <kernelmodule>
-can also be a whole subsystem, if prefixed with a "=", like "=drivers/net/team".
-
-instmods will not install the kernel module, if $hostonly is set and the kernel
-module is not currently needed by any /sys/*...*/uevent MODALIAS.
-To install a kernel module regardless of the hostonly mode use the form:
-----
-hostonly='' instmods <kernelmodule>
-----
-
-=== Initramfs Functions
-
-FIXME
-
-
-=== Network Modules
-
-FIXME
-
-AUTHOR
-------
-Harald Hoyer
-
-SEE ALSO
---------
-*dracut*(8)

dracut.spec

@@ -1,482 +1,295 @@
-%define dracutlibdir %{_prefix}/lib/dracut
-%bcond_without doc
+# Variables must be defined
+%define with_switch_root	1
+%define with_nbd		1
 
-# We ship a .pc file but don't want to have a dep on pkg-config. We
-# strip the automatically generated dep here and instead co-own the
-# directory.
-%global __requires_exclude pkg-config
-%define dist_free_release xxx
+# switchroot provided by util-linux-ng in F-12+
+%if 0%{?fedora} > 11 || 0%{?rhel} >= 6
+%define with_switch_root 0
+%endif
+# nbd in Fedora only
+%if 0%{?rhel} >= 6
+%define with_nbd 0
+%endif
 
 Name: dracut
-Version: xxx
-Release: %{dist_free_release}%{?dist}
-
+Version: 004
+Release: 1%{?dist}
 Summary: Initramfs generator using udev
-%if 0%{?fedora} || 0%{?rhel}
 Group: System Environment/Base
-%endif
-%if 0%{?suse_version}
-Group: System/Base
+License: GPLv2+
+URL: http://apps.sourceforge.net/trac/dracut/wiki
+
+Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.bz2
+
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+
+%if 0%{?fedora} > 12 || 0%{?rhel} >= 6
+# no "provides", because dracut does not offer
+# all functionality of the obsoleted packages
+Obsoletes: mkinitrd <= 6.0.93
+Obsoletes: mkinitrd-devel <= 6.0.93
+Obsoletes: nash <= 6.0.93
+Obsoletes: libbdevid-python <= 6.0.93
 %endif
 
-# The entire source code is GPLv2+
-# except install/* which is LGPLv2+
-License: GPLv2+ and LGPLv2+
-
-URL: https://dracut.wiki.kernel.org/
-
-# Source can be generated by
-# http://git.kernel.org/?p=boot/dracut/dracut.git;a=snapshot;h=%%{version};sf=tgz
-Source0: http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.xz
-Source1: https://www.gnu.org/licenses/lgpl-2.1.txt
-
-BuildRequires: bash
-BuildRequires: git
-BuildRequires: kmod-devel >= 23
-BuildRequires: gcc
-
-%if 0%{?fedora} || 0%{?rhel}
-BuildRequires: pkgconfig
-BuildRequires: systemd
-%endif
-%if 0%{?fedora}
-BuildRequires: bash-completion
-%endif
-
-%if %{with doc}
-%if 0%{?fedora} || 0%{?rhel}
-BuildRequires: docbook-style-xsl docbook-dtds libxslt
-%endif
-
-%if 0%{?suse_version}
-BuildRequires: docbook-xsl-stylesheets libxslt
-%endif
-
-BuildRequires: asciidoc
-%endif
-
-%if 0%{?suse_version} > 9999
-Obsoletes: mkinitrd < 2.6.1
-Provides: mkinitrd = 2.6.1
-%endif
-
-Obsoletes: dracut-fips <= 047
-Provides:  dracut-fips = %{version}-%{release}
-Obsoletes: dracut-fips-aesni <= 047
-Provides:  dracut-fips-aesni = %{version}-%{release}
-
-Obsoletes: dracut-kernel < 005
-Provides:  dracut-kernel = %{version}-%{release}
-
-Obsoletes: dracut < 030
-Obsoletes: dracut-norescue < 030
-Provides:  dracut-norescue = %{version}-%{release}
-
-Requires: bash >= 4
+Requires: bash
+Requires: bzip2
 Requires: coreutils
 Requires: cpio
+Requires: dash
 Requires: filesystem >= 2.1.0
 Requires: findutils
 Requires: grep
-Requires: kmod
+Requires: gzip
+Requires: initscripts >= 8.63-1
+Requires: kbd
+Requires: mktemp >= 1.5-5
+Requires: module-init-tools >= 3.7-9
+Requires: mount
+Requires: plymouth >= 0.8.0-0.2009.29.09.19.1
+Requires: plymouth-scripts
 Requires: sed
-Requires: xz
-Requires: gzip
+Requires: tar
+Requires: udev
+Requires: util-linux-ng >= 2.16
+Requires: which
+Requires: file
 
-%if 0%{?fedora} || 0%{?rhel}
-Recommends: hardlink
-Recommends: pigz
-Recommends: kpartx
-Requires: util-linux >= 2.21
-Requires: systemd >= 219
-Requires: systemd-udev >= 219
-Requires: procps-ng
-%else
-Requires: hardlink
-Requires: gzip
-Requires: kpartx
-Requires: udev > 166
-Requires: util-linux-ng >= 2.21
+%if ! 0%{?with_switch_root}
+Requires: util-linux-ng >= 2.16
+BuildArch: noarch
 %endif
 
-%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
-Requires: libkcapi-hmaccalc
-%endif
+BuildRequires: docbook-style-xsl docbook-dtds libxslt
+BuildRequires: dash bash git
 
 %description
-dracut contains tools to create bootable initramfses for the Linux
-kernel. Unlike previous implementations, dracut hard-codes as little
-as possible into the initramfs. dracut contains various modules which
-are driven by the event-based udev. Having root on MD, DM, LVM2, LUKS
-is supported as well as NFS, iSCSI, NBD, FCoE with the dracut-network
-package.
+dracut is a new, event-driven initramfs infrastructure based around udev.
 
 %package network
-Summary: dracut modules to build a dracut initramfs with network support
-%if 0%{?_module_build}
-# In the module-build-service, we have pieces of dracut provided by different
-# modules ("base-runtime" provides most functionality, but we need
-# dracut-network in "installer". Since these two modules build with separate
-# dist-tags, we need to reduce this strict requirement to ignore the dist-tag.
-Requires: %{name} >= %{version}-%{dist_free_release}
-%else
+Summary: Dracut modules to build a dracut initramfs with network support
 Requires: %{name} = %{version}-%{release}
+Requires: dhclient rpcbind nfs-utils
+Requires: iscsi-initiator-utils
+%if %{with_nbd}
+Requires: nbd
 %endif
-Requires: iputils
-Requires: iproute
-Requires: dhclient
-Obsoletes: dracut-generic < 008
-Provides:  dracut-generic = %{version}-%{release}
+Requires: net-tools iproute
+Requires: bridge-utils
 
 %description network
 This package requires everything which is needed to build a generic
 all purpose initramfs with network support with dracut.
 
+%package fips
+Summary: Dracut modules to build a dracut initramfs with an integrity check
+Requires: %{name} = %{version}-%{release}
+Requires: hmaccalc fipscheck
+%if 0%{?rhel} > 5
+# For Alpha 3, we want nss instead of nss-softokn
+Requires: nss
+%else
+Requires: nss-softokn
+%endif
+Requires: nss-softokn-freebl >= 3.14.3-22.el6_6
+
+%description fips
+This package requires everything which is needed to build an
+all purpose initramfs with dracut, which does an integrity check.
+
+%package fips-aesni
+Summary: Dracut modules to build a dracut initramfs with an integrity check with aesni-intel
+Requires: %{name}-fips = %{version}-%{release}
+
+%description fips-aesni
+This package requires everything which is needed to build an
+all purpose initramfs with dracut, which does an integrity check
+and adds the aesni-intel kernel module.
+
 %package caps
-Summary: dracut modules to build a dracut initramfs which drops capabilities
+Summary: Dracut modules to build a dracut initramfs which drops capabilities
 Requires: %{name} = %{version}-%{release}
 Requires: libcap
 
 %description caps
 This package requires everything which is needed to build an
-initramfs with dracut, which drops capabilities.
+all purpose initramfs with dracut, which drops capabilities.
 
-%package live
-Summary: dracut modules to build a dracut initramfs with live image capabilities
-%if 0%{?_module_build}
-# See the network subpackage comment.
-Requires: %{name} >= %{version}-%{dist_free_release}
-%else
+%package generic
+Summary: Metapackage to build a generic initramfs with dracut
 Requires: %{name} = %{version}-%{release}
-%endif
 Requires: %{name}-network = %{version}-%{release}
-Requires: tar gzip coreutils bash device-mapper curl
-%if 0%{?fedora}
-Requires: fuse ntfs-3g
-%endif
 
-%description live
-This package requires everything which is needed to build an
-initramfs with dracut, with live image capabilities, like Live CDs.
+%description generic
+This package requires everything which is needed to build a generic
+all purpose initramfs with dracut.
 
-%package config-generic
-Summary: dracut configuration to turn off hostonly image generation
+
+%package kernel
+Summary: Metapackage to build generic initramfs with dracut with only kernel modules
 Requires: %{name} = %{version}-%{release}
-Obsoletes: dracut-nohostonly < 030
-Provides:  dracut-nohostonly = %{version}-%{release}
 
-%description config-generic
-This package provides the configuration to turn off the host specific initramfs
-generation with dracut and generates a generic image by default.
-
-%package config-rescue
-Summary: dracut configuration to turn on rescue image generation
-Requires: %{name} = %{version}-%{release}
-Obsoletes: dracut < 030
-
-%description config-rescue
-This package provides the configuration to turn on the rescue initramfs
-generation with dracut.
+%description kernel
+This package requires everything which is needed to build a initramfs with all
+kernel modules and firmware files needed by dracut modules.
 
 %package tools
-Summary: dracut tools to build the local initramfs
+Summary: Dracut tools to build the local initramfs
 Requires: %{name} = %{version}-%{release}
+Requires: coreutils cryptsetup-luks device-mapper
+Requires: diffutils dmraid findutils gawk grep lvm2
+Requires: module-init-tools sed
+Requires: cpio gzip
 
 %description tools
 This package contains tools to assemble the local initrd and host configuration.
 
-%package squash
-Summary: dracut module to build an initramfs with most files in a squashfs image
-Requires: %{name} = %{version}-%{release}
-Requires: squashfs-tools
-
-%description squash
-This package provides a dracut module to build an initramfs, but store most files
-in a squashfs image, result in a smaller initramfs size and reduce runtime memory
-usage.
-
 %prep
-%autosetup -n %{name}-%{version} -S git_am
-cp %{SOURCE1} .
+%setup -q -n %{name}-%{version}
+
+%if %{defined PATCH1}
+git init
+git config user.email "dracut-maint@redhat.com"
+git config user.name "Fedora dracut team"
+git add .
+git commit -a -q -m "%{version} baseline."
+
+# Apply all the patches.
+git am -p1 %{patches}
+%endif
+
+chmod 0755 modules.d/*/check
+# make rpmlint happy
+chmod 0755 modules.d/*/install
+chmod 0755 modules.d/*/installkernel
+chmod 0755 modules.d/*/*.sh
 
 %build
-%configure  --systemdsystemunitdir=%{_unitdir} \
-            --bashcompletiondir=$(pkg-config --variable=completionsdir bash-completion) \
-            --libdir=%{_prefix}/lib \
-%if %{without doc}
-            --disable-documentation \
-%endif
-            ${NULL}
-
-make %{?_smp_mflags}
+make WITH_SWITCH_ROOT=0%{?with_switch_root}
 
 %install
-make %{?_smp_mflags} install \
-     DESTDIR=$RPM_BUILD_ROOT \
-     libdir=%{_prefix}/lib
+rm -rf $RPM_BUILD_ROOT
+make install DESTDIR=$RPM_BUILD_ROOT sbindir=/sbin \
+     sysconfdir=/etc mandir=%{_mandir} WITH_SWITCH_ROOT=0%{?with_switch_root}
 
-echo "DRACUT_VERSION=%{version}-%{release}" > $RPM_BUILD_ROOT/%{dracutlibdir}/dracut-version.sh
-
-%if 0%{?fedora} == 0 && 0%{?rhel} == 0 && 0%{?suse_version} == 0
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/01fips
-%endif
-
-%if %{defined _unitdir}
-# for systemd, better use systemd-bootchart
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00bootchart
-%endif
-
-# we do not support dash in the initramfs
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00dash
-
-# remove gentoo specific modules
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/50gensplash
-
-%if %{defined _unitdir}
-# with systemd IMA and selinux modules do not make sense
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/96securityfs
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/97masterkey
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/98integrity
-%endif
-
-%ifnarch s390 s390x
-# remove architecture specific modules
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/80cms
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/81cio_ignore
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/91zipl
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95dasd
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95dasd_mod
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95dasd_rules
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95dcssblk
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95qeth_rules
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95zfcp
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95zfcp_rules
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/95znet
-%else
-rm -fr -- $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/00warpclock
-%endif
+echo %{name}-%{version}-%{release} > $RPM_BUILD_ROOT/%{_datadir}/dracut/modules.d/10rpmversion/dracut-version
+rm $RPM_BUILD_ROOT/%{_datadir}/dracut/modules.d/01fips/check
+rm $RPM_BUILD_ROOT/%{_datadir}/dracut/modules.d/02fips-aesni/check
 
 mkdir -p $RPM_BUILD_ROOT/boot/dracut
 mkdir -p $RPM_BUILD_ROOT/var/lib/dracut/overlay
 mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/log
 touch $RPM_BUILD_ROOT%{_localstatedir}/log/dracut.log
-mkdir -p $RPM_BUILD_ROOT%{_sharedstatedir}/initramfs
 
-%if 0%{?fedora} || 0%{?rhel}
-install -m 0644 dracut.conf.d/fedora.conf.example $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
-rm -f $RPM_BUILD_ROOT%{_mandir}/man?/*suse*
-%endif
-%if 0%{?suse_version}
-install -m 0644 dracut.conf.d/suse.conf.example   $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/01-dist.conf
+%if 0%{?fedora} <= 12 && 0%{?rhel} < 6
+rm $RPM_BUILD_ROOT/sbin/mkinitrd
+rm $RPM_BUILD_ROOT/sbin/lsinitrd
 %endif
 
-%if 0%{?fedora} == 0 && 0%{?rhel} == 0 && 0%{?suse_version} <= 9999
-rm -f -- $RPM_BUILD_ROOT%{_bindir}/mkinitrd
-rm -f -- $RPM_BUILD_ROOT%{_bindir}/lsinitrd
-%endif
+mkdir -p $RPM_BUILD_ROOT/etc/logrotate.d
+install -m 0644 dracut.logrotate $RPM_BUILD_ROOT/etc/logrotate.d/dracut
 
-%if 0%{?fedora} || 0%{?rhel}
-echo 'hostonly="no"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-generic-image.conf
-echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/02-rescue.conf
+echo 'do_strip=no' > $RPM_BUILD_ROOT/etc/dracut.conf.d/02-fips.conf
+> $RPM_BUILD_ROOT/etc/system-fips
 
-# FIXME: remove after F30
-mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/kernel/postinst.d
-install -m 0755 51-dracut-rescue-postinst.sh $RPM_BUILD_ROOT%{_sysconfdir}/kernel/postinst.d/51-dracut-rescue-postinst.sh
-%endif
+%clean
+rm -rf $RPM_BUILD_ROOT
 
 %files
-%if %{with doc}
-%doc README HACKING TODO AUTHORS NEWS dracut.html dracut.png dracut.svg
+%defattr(-,root,root,0755)
+%doc README HACKING TODO COPYING AUTHORS NEWS dracut-rhel6.html
+/sbin/dracut
+%if 0%{?with_switch_root}
+/sbin/switch_root
 %endif
-%{!?_licensedir:%global license %%doc}
-%license COPYING lgpl-2.1.txt
-%{_bindir}/dracut
-%{_datadir}/bash-completion/completions/dracut
-%{_datadir}/bash-completion/completions/lsinitrd
-%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version} > 9999
-%{_bindir}/mkinitrd
-%{_bindir}/lsinitrd
+%if 0%{?fedora} > 12 || 0%{?rhel} >= 6
+/sbin/mkinitrd
+/sbin/lsinitrd
 %endif
-%dir %{dracutlibdir}
-%dir %{dracutlibdir}/modules.d
-%{dracutlibdir}/dracut-functions.sh
-%{dracutlibdir}/dracut-init.sh
-%{dracutlibdir}/dracut-functions
-%{dracutlibdir}/dracut-version.sh
-%{dracutlibdir}/dracut-logger.sh
-%{dracutlibdir}/dracut-initramfs-restore
-%{dracutlibdir}/dracut-install
-%{dracutlibdir}/skipcpio
-%config(noreplace) %{_sysconfdir}/dracut.conf
-%if 0%{?fedora} || 0%{?suse_version} || 0%{?rhel}
-%{dracutlibdir}/dracut.conf.d/01-dist.conf
-%endif
-%dir %{_sysconfdir}/dracut.conf.d
-%dir %{dracutlibdir}/dracut.conf.d
-%dir %{_datadir}/pkgconfig
-%{_datadir}/pkgconfig/dracut.pc
-
-%if %{with doc}
-%{_mandir}/man8/dracut.8*
-%{_mandir}/man8/*service.8*
-%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version} > 9999
-%{_mandir}/man8/mkinitrd.8*
+%dir %{_datadir}/dracut
+%{_datadir}/dracut/dracut-functions
+%config(noreplace) /etc/dracut.conf
+%dir /etc/dracut.conf.d
+%config(noreplace) /etc/logrotate.d/dracut
 %{_mandir}/man1/lsinitrd.1*
-%endif
-%{_mandir}/man7/dracut.kernel.7*
-%{_mandir}/man7/dracut.cmdline.7*
-%{_mandir}/man7/dracut.modules.7*
-%{_mandir}/man7/dracut.bootup.7*
+%{_mandir}/man8/mkinitrd.8*
+%{_mandir}/man8/dracut.8*
 %{_mandir}/man5/dracut.conf.5*
-%endif
-
-%if %{undefined _unitdir}
-%{dracutlibdir}/modules.d/00bootchart
-%endif
-%{dracutlibdir}/modules.d/00bash
-%{dracutlibdir}/modules.d/00systemd
-%ifnarch s390 s390x
-%{dracutlibdir}/modules.d/00warpclock
-%endif
-%if 0%{?fedora} || 0%{?rhel} || 0%{?suse_version}
-%{dracutlibdir}/modules.d/01fips
-%endif
-%{dracutlibdir}/modules.d/01systemd-initrd
-%{dracutlibdir}/modules.d/03modsign
-%{dracutlibdir}/modules.d/03rescue
-%{dracutlibdir}/modules.d/04watchdog
-%{dracutlibdir}/modules.d/05busybox
-%{dracutlibdir}/modules.d/06rngd
-%{dracutlibdir}/modules.d/10i18n
-%{dracutlibdir}/modules.d/30convertfs
-%{dracutlibdir}/modules.d/45url-lib
-%{dracutlibdir}/modules.d/50drm
-%{dracutlibdir}/modules.d/50plymouth
-%{dracutlibdir}/modules.d/80lvmmerge
-%{dracutlibdir}/modules.d/90btrfs
-%{dracutlibdir}/modules.d/90crypt
-%{dracutlibdir}/modules.d/90dm
-%{dracutlibdir}/modules.d/90dmraid
-%{dracutlibdir}/modules.d/90kernel-modules
-%{dracutlibdir}/modules.d/90kernel-modules-extra
-%{dracutlibdir}/modules.d/90lvm
-%{dracutlibdir}/modules.d/90mdraid
-%{dracutlibdir}/modules.d/90multipath
-%{dracutlibdir}/modules.d/90stratis
-%{dracutlibdir}/modules.d/90qemu
-%{dracutlibdir}/modules.d/91crypt-gpg
-%{dracutlibdir}/modules.d/91crypt-loop
-%{dracutlibdir}/modules.d/95debug
-%{dracutlibdir}/modules.d/95fstab-sys
-%{dracutlibdir}/modules.d/95lunmask
-%{dracutlibdir}/modules.d/95resume
-%{dracutlibdir}/modules.d/95rootfs-block
-%{dracutlibdir}/modules.d/95terminfo
-%{dracutlibdir}/modules.d/95udev-rules
-%{dracutlibdir}/modules.d/95virtfs
-%ifarch s390 s390x
-%{dracutlibdir}/modules.d/80cms
-%{dracutlibdir}/modules.d/81cio_ignore
-%{dracutlibdir}/modules.d/91zipl
-%{dracutlibdir}/modules.d/95dasd
-%{dracutlibdir}/modules.d/95dasd_mod
-%{dracutlibdir}/modules.d/95dasd_rules
-%{dracutlibdir}/modules.d/95dcssblk
-%{dracutlibdir}/modules.d/95qeth_rules
-%{dracutlibdir}/modules.d/95zfcp
-%{dracutlibdir}/modules.d/95zfcp_rules
-%endif
-%if %{undefined _unitdir}
-%{dracutlibdir}/modules.d/96securityfs
-%{dracutlibdir}/modules.d/97masterkey
-%{dracutlibdir}/modules.d/98integrity
-%endif
-%{dracutlibdir}/modules.d/97biosdevname
-%{dracutlibdir}/modules.d/98dracut-systemd
-%{dracutlibdir}/modules.d/98ecryptfs
-%{dracutlibdir}/modules.d/98pollcdrom
-%{dracutlibdir}/modules.d/98selinux
-%{dracutlibdir}/modules.d/98syslog
-%{dracutlibdir}/modules.d/98usrmount
-%{dracutlibdir}/modules.d/99base
-%{dracutlibdir}/modules.d/99fs-lib
-%{dracutlibdir}/modules.d/99shutdown
+%{_datadir}/dracut/modules.d/00dash
+%{_datadir}/dracut/modules.d/10redhat-i18n
+%{_datadir}/dracut/modules.d/10rpmversion
+%{_datadir}/dracut/modules.d/50plymouth
+%{_datadir}/dracut/modules.d/60xen
+%{_datadir}/dracut/modules.d/90btrfs
+%{_datadir}/dracut/modules.d/90crypt
+%{_datadir}/dracut/modules.d/90dm
+%{_datadir}/dracut/modules.d/90dmraid
+%{_datadir}/dracut/modules.d/90dmsquash-live
+%{_datadir}/dracut/modules.d/90kernel-modules
+%{_datadir}/dracut/modules.d/90lvm
+%{_datadir}/dracut/modules.d/90mdraid
+%{_datadir}/dracut/modules.d/90multipath
+%{_datadir}/dracut/modules.d/95debug
+%{_datadir}/dracut/modules.d/95fstab-sys
+%{_datadir}/dracut/modules.d/95resume
+%{_datadir}/dracut/modules.d/95rootfs-block
+%{_datadir}/dracut/modules.d/95dasd
+%{_datadir}/dracut/modules.d/95dasd_mod
+%{_datadir}/dracut/modules.d/95zfcp
+%{_datadir}/dracut/modules.d/95znet
+%{_datadir}/dracut/modules.d/95terminfo
+%{_datadir}/dracut/modules.d/95udev-rules
+%{_datadir}/dracut/modules.d/95uswsusp
+%{_datadir}/dracut/modules.d/96insmodpost
+%{_datadir}/dracut/modules.d/97biosdevname
+%{_datadir}/dracut/modules.d/98syslog
+%{_datadir}/dracut/modules.d/99base
 %attr(0644,root,root) %ghost %config(missingok,noreplace) %{_localstatedir}/log/dracut.log
-%dir %{_sharedstatedir}/initramfs
-%if %{defined _unitdir}
-%{_unitdir}/dracut-shutdown.service
-%{_unitdir}/sysinit.target.wants/dracut-shutdown.service
-%{_unitdir}/dracut-cmdline.service
-%{_unitdir}/dracut-initqueue.service
-%{_unitdir}/dracut-mount.service
-%{_unitdir}/dracut-pre-mount.service
-%{_unitdir}/dracut-pre-pivot.service
-%{_unitdir}/dracut-pre-trigger.service
-%{_unitdir}/dracut-pre-udev.service
-%{_unitdir}/initrd.target.wants/dracut-cmdline.service
-%{_unitdir}/initrd.target.wants/dracut-initqueue.service
-%{_unitdir}/initrd.target.wants/dracut-mount.service
-%{_unitdir}/initrd.target.wants/dracut-pre-mount.service
-%{_unitdir}/initrd.target.wants/dracut-pre-pivot.service
-%{_unitdir}/initrd.target.wants/dracut-pre-trigger.service
-%{_unitdir}/initrd.target.wants/dracut-pre-udev.service
-
-%endif
-%if 0%{?fedora} || 0%{?rhel}
-%{_prefix}/lib/kernel/install.d/50-dracut.install
-%endif
 
 %files network
-%{dracutlibdir}/modules.d/02systemd-networkd
-%{dracutlibdir}/modules.d/35network-manager
-%{dracutlibdir}/modules.d/35network-legacy
-%{dracutlibdir}/modules.d/40network
-%{dracutlibdir}/modules.d/45ifcfg
-%{dracutlibdir}/modules.d/90kernel-network-modules
-%{dracutlibdir}/modules.d/90qemu-net
-%{dracutlibdir}/modules.d/95cifs
-%{dracutlibdir}/modules.d/95fcoe
-%{dracutlibdir}/modules.d/95fcoe-uefi
-%{dracutlibdir}/modules.d/95iscsi
-%{dracutlibdir}/modules.d/95nbd
-%{dracutlibdir}/modules.d/95nfs
-%{dracutlibdir}/modules.d/95ssh-client
-%ifarch s390 s390x
-%{dracutlibdir}/modules.d/95znet
-%endif
-%{dracutlibdir}/modules.d/99uefi-lib
+%defattr(-,root,root,0755)
+%doc README HACKING TODO COPYING AUTHORS NEWS
+%{_datadir}/dracut/modules.d/40network
+%{_datadir}/dracut/modules.d/95fcoe
+%{_datadir}/dracut/modules.d/95iscsi
+%{_datadir}/dracut/modules.d/95nbd
+%{_datadir}/dracut/modules.d/95nfs
+%{_datadir}/dracut/modules.d/45ifcfg
+
+%files fips
+%defattr(-,root,root,0755)
+%doc COPYING
+%{_datadir}/dracut/modules.d/01fips
+%config(noreplace) /etc/dracut.conf.d/02-fips.conf
+%config(missingok) /etc/system-fips
+
+%files fips-aesni
+%defattr(-,root,root,0755)
+%doc COPYING
+%{_datadir}/dracut/modules.d/02fips-aesni
 
 %files caps
-%{dracutlibdir}/modules.d/02caps
+%defattr(-,root,root,0755)
+%doc COPYING
+%{_datadir}/dracut/modules.d/02caps
 
-%files live
-%{dracutlibdir}/modules.d/99img-lib
-%{dracutlibdir}/modules.d/90dmsquash-live
-%{dracutlibdir}/modules.d/90dmsquash-live-ntfs
-%{dracutlibdir}/modules.d/90livenet
+%files kernel
+%defattr(-,root,root,0755)
+%doc README.kernel
+
+%files generic
+%defattr(-,root,root,0755)
+%doc README.generic
 
 %files tools
-%if %{with doc}
-%doc %{_mandir}/man8/dracut-catimages.8*
-%endif
-
-%{_bindir}/dracut-catimages
+%defattr(-,root,root,0755)
+%doc COPYING NEWS
+%{_mandir}/man8/dracut-gencmdline.8*
+%{_mandir}/man8/dracut-catimages.8*
+/sbin/dracut-gencmdline
+/sbin/dracut-catimages
 %dir /boot/dracut
 %dir /var/lib/dracut
 %dir /var/lib/dracut/overlay
 
-%files squash
-%{dracutlibdir}/modules.d/99squash
-
-%files config-generic
-%{dracutlibdir}/dracut.conf.d/02-generic-image.conf
-
-%files config-rescue
-%{dracutlibdir}/dracut.conf.d/02-rescue.conf
-%if 0%{?fedora} || 0%{?rhel}
-%{_prefix}/lib/kernel/install.d/51-dracut-rescue.install
-# FIXME: remove after F30
-%{_sysconfdir}/kernel/postinst.d/51-dracut-rescue-postinst.sh
-%endif
-
 %changelog

dracut.usage.asc

@@ -1,518 +0,0 @@
-To create a initramfs image, the most simple command is:
-----
-# dracut
-----
-
-This will generate a general purpose initramfs image, with all possible
-functionality resulting of the combination of the installed dracut modules and
-system tools. The image is /boot/initramfs-_++<kernel version>++_.img and
-contains the kernel modules of the currently active kernel with version
-_++<kernel version>++_.
-
-If the initramfs image already exists, dracut will display an error message, and
-to overwrite the existing image, you have to use the --force option.
-----
-# dracut --force
-----
-
-If you want to specify another filename for the resulting image you would issue
-a command like:
-----
-# dracut foobar.img
-----
-
-To generate an image for a specific kernel version, the command would be:
-----
-# dracut foobar.img 2.6.40-1.rc5.f20
-----
-
-A shortcut to generate the image at the default location for a specific kernel
-version is:
-----
-# dracut --kver 2.6.40-1.rc5.f20
-----
-
-If you want to create lighter, smaller initramfs images, you may want to specify
-the --hostonly or -H option. Using this option, the resulting image will
-contain only those dracut modules, kernel modules and filesystems, which are
-needed to boot this specific machine. This has the drawback, that you can't put
-the disk on another controller or machine, and that you can't switch to another
-root filesystem, without recreating the initramfs image. The usage of the
---hostonly option is only for experts and you will have to keep the broken
-pieces. At least keep a copy of a general purpose image (and corresponding
-kernel) as a fallback to rescue your system.
-
-=== Inspecting the Contents
-To see the contents of the image created by dracut, you can use the lsinitrd
-tool.
-----
-# lsinitrd | less
-----
-
-To display the contents of a file in the initramfs also use the lsinitrd tool:
-----
-# lsinitrd -f /etc/ld.so.conf
-include ld.so.conf.d/*.conf
-----
-
-=== Adding dracut Modules
-Some dracut modules are turned off by default and have to be activated manually.
-You can do this by adding the dracut modules to the configuration file
-_/etc/dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_. See *dracut.conf*(5).
-You can also add dracut modules on the command line
-by using the -a or --add option:
-----
-# dracut --add bootchart initramfs-bootchart.img
-----
-
-To see a list of available dracut modules, use the --list-modules option:
-----
-# dracut --list-modules
-----
-
-=== Omitting dracut Modules
-Sometimes you don't want a dracut module to be included for reasons of speed,
-size or functionality. To do this, either specify the omit_dracutmodules
-variable in the _dracut.conf_ or _/etc/dracut.conf.d/myconf.conf_ configuration
-file (see *dracut.conf*(5)), or use the -o or --omit option
-on the command line:
-----
-# dracut -o "multipath lvm" no-multipath-lvm.img
-----
-
-=== Adding Kernel Modules
-If you need a special kernel module in the initramfs, which is not
-automatically picked up by dracut, you have the use the --add-drivers option
-on the command line or  the drivers vaiable in  the _/etc/dracut.conf_
-or _/etc/dracut.conf.d/myconf.conf_ configuration file (see *dracut.conf*(5)):
-----
-# dracut --add-drivers mymod initramfs-with-mymod.img
-----
-
-=== Boot parameters
-An initramfs generated without the "hostonly" mode, does not contain any system
-configuration files (except for some special exceptions), so the configuration
-has to be done on the kernel command line. With this flexibility, you can easily
-boot from a changed root partition, without the need to recompile the initramfs
-image. So, you could completly change your root partition (move it inside a md
-raid with encryption and LVM on top), as long as you specify the correct
-filesystem LABEL or UUID on the kernel command line for your root device, dracut
-will find it and boot from it.
-
-The kernel command line can also be provided by the dhcp server with the
-root-path option. See <<NetworkBoot>>.
-
-For a full reference of all kernel command line parameters,
-see *dracut.cmdline*(5).
-
-To get a quick start for the suitable kernel command line on your system,
-use the __--print-cmdline__ option:
-----
-# dracut --print-cmdline
- root=UUID=8b8b6f91-95c7-4da2-831b-171e12179081 rootflags=rw,relatime,discard,data=ordered rootfstype=ext4
-----
-
-==== Specifying the root Device
-This is the only option dracut really needs to boot from your root partition.
-Because your root partition can live in various environments, there are a lot of
-formats for the root= option. The most basic one is root=_++<path to device
-node>++_:
-----
-root=/dev/sda2
-----
-
-Because device node names can change, dependent on the drive ordering, you are
-encouraged to use the filesystem identifier (UUID) or filesystem label (LABEL)
-to specify your root partition:
-----
-root=UUID=19e9dda3-5a38-484d-a9b0-fa6b067d0331
-----
-
-or
-
-----
-root=LABEL=myrootpartitionlabel
-----
-
-To see all UUIDs or LABELs on your system, do:
-----
-# ls -l /dev/disk/by-uuid
-----
-
-or
-
-----
-# ls -l /dev/disk/by-label
-----
-
-If your root partition is on the network see <<NetworkBoot>>.
-
-==== Keyboard Settings
-If you have to input passwords for encrypted disk volumes, you might want to set
-the keyboard layout and specify a display font.
-
-A typical german kernel command would contain:
-----
-rd.vconsole.font=latarcyrheb-sun16 rd.vconsole.keymap=de-latin1-nodeadkeys rd.locale.LANG=de_DE.UTF-8
-----
-
-Setting these options can override the setting stored on your system, if you use
-a modern init system, like systemd.
-
-==== Blacklisting Kernel Modules
-Sometimes it is required to prevent the automatic kernel module loading of a
-specific kernel module. To do this, just add rd.blacklist=_++<kernel module
-name>++_, with _++<kernel module name>++_ not containing the _.ko_
-suffix, to the kernel command line. For example:
-----
-rd.driver.blacklist=mptsas rd.driver.blacklist=nouveau
-----
-
-The option can be specified multiple times on the kernel command line.
-
-==== Speeding up the Boot Process
-If you want to speed up the boot process, you can specify as much information
-for dracut on the kernel command as possible. For example, you can tell dracut,
-that you root partition is not on a LVM volume or not on a raid partition, or
-that it lives inside a specific crypto LUKS encrypted volume. By default, dracut
-searches everywhere. A typical dracut kernel command line for a plain primary or
-logical partition would contain:
-----
-rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0
-----
-
-This turns off every automatic assembly of LVM, MD raids, DM raids and
-crypto LUKS.
-
-Of course, you could also omit the dracut modules in the initramfs creation
-process, but then you would lose the posibility to turn it on on demand.
-
-
-[[Injecting]]
-=== Injecting custom Files
-To add your own files to the initramfs image, you have several possibilities.
-
-The --include option let you specify a source path and a target path.
-For example
-----
-# dracut --include cmdline-preset /etc/cmdline.d/mycmdline.conf initramfs-cmdline-pre.img
-----
-will create an initramfs image, where the file cmdline-preset will be copied
-inside the initramfs to _/etc/cmdline.d/mycmdline.conf_. --include can only
-be specified once.
-
-
-----
-# mkdir -p rd.live.overlay/etc/cmdline.d
-# mkdir -p rd.live.overlay/etc/conf.d
-# echo "ip=dhcp" >> rd.live.overlay/etc/cmdline.d/mycmdline.conf
-# echo export FOO=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
-# echo export BAR=testtest >> rd.live.overlay/etc/conf.d/testvar.conf
-# tree rd.live.overlay/
-rd.live.overlay/
-`-- etc
-    |-- cmdline.d
-    |   `-- mycmdline.conf
-    `-- conf.d
-        `-- testvar.conf
-
-# dracut --include rd.live.overlay / initramfs-rd.live.overlay.img
-----
-
-This will put the contents of the rd.live.overlay directory into the root of the
-initramfs image.
-
-The --install option let you specify several files, which will get installed in
-the initramfs image at the same location, as they are present on initramfs
-creation time.
-
-
-----
-# dracut --install 'strace fsck.ext3 ssh' initramfs-dbg.img
-----
-
-This will create an initramfs with the strace, fsck.ext3 and ssh executables,
-together with the libraries needed to start those. The --install option can be
-specified multiple times.
-
-
-[[NetworkBoot]]
-=== Network Boot
-
-If your root partition is on a network drive, you have to have the network
-dracut modules installed to create a network aware initramfs image.
-
-If you specify ip=dhcp on the kernel command line, then dracut asks a dhcp
-server about the ip address for the machine. The dhcp server can also serve an
-additional root-path, which will set the root device for dracut. With this
-mechanism, you have static configuration on your client machine and a
-centralized boot configuration on your TFTP/DHCP server. If you can't pass a
-kernel command line, then you can inject _/etc/cmdline.d/mycmdline.conf_, with a
-method described in <<Injecting>>.
-
-==== Reducing the Image Size
-
-To reduce the size of the initramfs, you should create it with by omitting all
-dracut modules, which you know, you don't need to boot the machine.
-
-You can also specify the exact dracut and kernel modules to produce a very tiny
-initramfs image.
-
-For example for a NFS image, you would do:
-
-
-----
-# dracut -m "nfs network  base" initramfs-nfs-only.img
-----
-
-Then you would boot from this image with your target machine and reduce the size
-once more by creating it on the target machine with the --host-only option:
-
-
-----
-# dracut -m "nfs network base" --host-only initramfs-nfs-host-only.img
-----
-
-This will reduce the size of the initramfs image significantly.
-
-
-== Troubleshooting
-
-If the boot process does not succeed, you have several options to debug the
-situation. Some of the basic operations are covered here. For more information
-you should also visit:
-https://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html
-
-
-[[identifying-your-problem-area]]
-=== Identifying your problem area
-. Remove ''rhgb'' and ''quiet'' from the kernel command line
-. Add ''rd.shell'' to the kernel command line. This will present a shell should
-dracut be unable to locate your root device
-. Add ''rd.shell rd.debug log_buf_len=1M'' to the kernel command line so that
-dracut shell commands are printed as they are executed
-. The file /run/initramfs/rdsosreport.txt is generated,
-which contains all the logs and the output of all significant tools, which are
-mentioned later.
-
-If you want to save that output, simply mount /boot by hand or insert an USB
-stick and mount that. Then you can store the output for later inspection.
-
-[[information-to-include-in-your-report]]
-=== Information to include in your report
-
-[[all-bug-reports]]
-==== All bug reports
-In all cases, the following should be mentioned and attached to your bug report:
-
-* The exact kernel command-line used. Typically from the bootloader
-configuration file (e.g. _/boot/grub2/grub.cfg_) or from _/proc/cmdline_.
-* A copy of your disk partition information from _/etc/fstab_, which might be
-obtained booting an old working initramfs or a rescue medium.
-* Turn on dracut debugging (see _the 'debugging dracut' section_), and attach
-the file /run/initramfs/rdsosreport.txt.
-* If you use a dracut configuration file, please include _/etc/dracut.conf_ and
-all files in _/etc/dracut.conf.d/*.conf_
-
-[[network-root-device-related-problems]]
-==== Network root device related problems
-This section details information to include when experiencing problems on a
-system whose root device is located on a network attached volume (e.g. iSCSI,
-NFS or NBD). As well as the information from <<all-bug-reports>>, include the
-following information:
-
-
-* Please include the output of
-+
-----
-# /sbin/ifup <interfacename>
-# ip addr show
-----
-
-[[debugging-dracut]]
-=== Debugging dracut
-
-
-[[configure-a-serial-console]]
-==== Configure a serial console
-
-Successfully debugging dracut will require some form of console
-logging during the system boot.  This section documents configuring a
-serial console connection to record boot messages.
-
-. First, enable serial console output for both the kernel and the bootloader.
-. Open the file _/boot/grub2/grub.cfg_ for editing. Below the line ''timeout=5'', add
-the following:
-+
-----
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-----
-+
-. Also in _/boot/grub2/grub.cfg_, add the following boot arguemnts to the ''kernel''
-line:
-+
-----
-console=tty0 console=ttyS0,9600
-----
-+
-. When finished, the _/boot/grub2/grub.cfg_ file should look similar to the example
-below.
-+
-----
-default=0
-timeout=5
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-title Fedora (2.6.29.5-191.fc11.x86_64)
-  root (hd0,0)
-  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 console=ttyS0,9600
-  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
-----
-+
-. More detailed information on how to configure the kernel for console output
-can be found at
-http://www.faqs.org/docs/Linux-HOWTO/Remote-Serial-Console-HOWTO.html#CONFIGURE-KERNEL.
-. Redirecting non-interactive output
-+
---
-NOTE: You can redirect all non-interactive output to _/dev/kmsg_ and the kernel
-will put it out on the console when it reaches the kernel buffer by doing
-
-----
-# exec >/dev/kmsg 2>&1 </dev/console
-----
---
-
-[[using-the-dracut-shell]]
-==== Using the dracut shell
-
-dracut offers a shell for interactive debugging in the event dracut fails to
-locate your root filesystem. To enable the shell:
-
-. Add the boot parameter ''rd.shell'' to your bootloader configuration file
-(e.g. _/boot/grub2/grub.cfg_)
-. Remove the boot arguments ''rhgb'' and ''quiet''
-+
-A sample _/boot/grub2/grub.cfg_ bootloader configuration file is listed below.
-+
-----
-default=0
-timeout=5
-serial --unit=0 --speed=9600
-terminal --timeout=5 serial console
-title Fedora (2.6.29.5-191.fc11.x86_64)
-  root (hd0,0)
-  kernel /vmlinuz-2.6.29.5-191.fc11.x86_64 ro root=/dev/mapper/vg_uc1-lv_root console=tty0 rd.shell
-  initrd /dracut-2.6.29.5-191.fc11.x86_64.img
-----
-+
-. If system boot fails, you will be dropped into a shell as seen in the example
-below.
-+
-----
-No root device found
-Dropping to debug shell.
-
-#
-----
-+
-. Use this shell prompt to gather the information requested above
-(see <<all-bug-reports>>).
-
-[[accessing-the-root-volume-from-the-dracut-shell]]
-==== Accessing the root volume from the dracut shell
-From the dracut debug shell, you can manually perform the task of locating and
-preparing your root volume for boot. The required steps will depend on how your
-root volume is configured. Common scenarios include:
-
-* A block device (e.g. _/dev/sda7_)
-* A LVM logical volume (e.g. _/dev/VolGroup00/LogVol00_)
-* An encrypted device
-  (e.g. _/dev/mapper/luks-4d5972ea-901c-4584-bd75-1da802417d83_)
-* A network attached device
-  (e.g. _netroot=iscsi:@192.168.0.4::3260::iqn.2009-02.org.example:for.all_)
-
-The exact method for locating and preparing will vary. However, to continue with
-a successful boot, the objective is to locate your root volume and create a
-symlink _/dev/root_ which points to the file system. For example, the following
-example demonstrates accessing and booting a root volume that is an encrypted
-LVM Logical volume.
-
-. Inspect your partitions using parted
-+
-----
-# parted /dev/sda -s p
-Model: ATA HTS541060G9AT00 (scsi)
-Disk /dev/sda: 60.0GB
-Sector size (logical/physical): 512B/512B
-Partition Table: msdos
-Number  Start   End     Size    Type      File system  Flags
-1      32.3kB  10.8GB  107MB   primary   ext4         boot
-2      10.8GB  55.6GB  44.7GB  logical                lvm
-----
-+
-. You recall that your root volume was a LVM logical volume. Scan and activate
-any logical volumes.
-+
-----
-# lvm vgscan
-# lvm vgchange -ay
-----
-+
-. You should see any logical volumes now using the command blkid:
-+
-----
-# blkid
-/dev/sda1: UUID="3de247f3-5de4-4a44-afc5-1fe179750cf7" TYPE="ext4"
-/dev/sda2: UUID="Ek4dQw-cOtq-5MJu-OGRF-xz5k-O2l8-wdDj0I" TYPE="LVM2_member"
-/dev/mapper/linux-root: UUID="def0269e-424b-4752-acf3-1077bf96ad2c" TYPE="crypto_LUKS"
-/dev/mapper/linux-home: UUID="c69127c1-f153-4ea2-b58e-4cbfa9257c5e" TYPE="ext3"
-/dev/mapper/linux-swap: UUID="47b4d329-975c-4c08-b218-f9c9bf3635f1" TYPE="swap"
-----
-+
-. From the output above, you recall that your root volume exists on an encrypted
-block device. Following the guidance disk encryption guidance from the
-Installation Guide, you unlock your encrypted root volume.
-+
-----
-# UUID=$(cryptsetup luksUUID /dev/mapper/linux-root)
-# cryptsetup luksOpen /dev/mapper/linux-root luks-$UUID
-Enter passphrase for /dev/mapper/linux-root:
-Key slot 0 unlocked.
-----
-+
-. Next, make a symbolic link to the unlocked root volume
-+
-----
-# ln -s /dev/mapper/luks-$UUID /dev/root
-----
-+
-. With the root volume available, you may continue booting the system by exiting
-the dracut shell
-+
-----
-# exit
-----
-
-[[additional-dracut-boot-parameters]]
-==== Additional dracut boot parameters
-For more debugging options, see *dracut.cmdline*(7).
-
-
-[[debugging-dracut-on-shutdown]]
-==== Debugging dracut on shutdown
-
-To debug the shutdown sequence on systemd systems, you can _rd.break_
-on _pre-shutdown_ or _shutdown_.
-
-To do this from an already booted system:
-----
-# mkdir -p /run/initramfs/etc/cmdline.d
-# echo "rd.debug rd.break=pre-shutdown rd.break=shutdown" > /run/initramfs/etc/cmdline.d/debug.conf
-# touch /run/initramfs/.need_shutdown
-----
-
-This will give you a dracut shell after the system pivot'ed back in the
-initramfs.
-

fedora-test.sh

@@ -1,61 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-[[ -d ${0%/*} ]] && cd ${0%/*}
-
-RUN_ID="$1"
-TESTS=$2
-
-dnf -y update --best --allowerasing &>/dev/null
-
-dnf -y install --best --allowerasing \
-    dash \
-    asciidoc \
-    mdadm \
-    lvm2 \
-    dmraid \
-    cryptsetup \
-    nfs-utils \
-    nbd \
-    dhcp-server \
-    scsi-target-utils \
-    iscsi-initiator-utils \
-    strace \
-    btrfs-progs \
-    kmod-devel \
-    gcc \
-    bzip2 \
-    xz \
-    tar \
-    wget \
-    rpm-build \
-    make \
-    git \
-    bash-completion \
-    sudo \
-    kernel \
-    dhcp-client \
-    /usr/bin/qemu-kvm \
-    /usr/bin/qemu-system-$(uname -i) \
-    e2fsprogs \
-    $NULL &>/dev/null
-
-./configure
-
-NCPU=$(getconf _NPROCESSORS_ONLN)
-
-if ! [[ $TESTS ]]; then
-    make -j$NCPU all syncheck rpm logtee
-else
-    make -j$NCPU all logtee
-
-    cd test
-
-    time sudo make \
-         KVERSION=$(rpm -qa kernel --qf '%{VERSION}-%{RELEASE}.%{ARCH}\n' | sort -rn | head -1) \
-         TEST_RUN_ID=$RUN_ID \
-         ${TESTS:+TESTS="$TESTS"} \
-         -k V=2 \
-         check
-fi

git2spec.pl

@@ -1,30 +1,28 @@
 #!/usr/bin/perl
 
+sub last_tag {
+    open( GIT, 'git log  --pretty=format:%H |');
+  LINE: while( <GIT> ) {
+      open( GIT2, "git tag --contains $_ |");
+      while( <GIT2> ) {
+	  chomp;
+	  last LINE if /..*/;
+      }
+      close GIT2;
+  }
+    $tag=$_;
+    close GIT2;
+    close GIT;         # be done
+    return $tag;
+};
+
 sub create_patches {
     my $tag=shift;
     my $pdir=shift;
-    my $n=1;
-    my @lines;
-    my $fname;
-    my $f=0;
-
-    mkdir $pdir, 0755;
-
-    open( GIT, 'git log -p --pretty=email --stat -m --first-parent --reverse '.$tag.'..HEAD |');
-
-    while (<GIT>) {
-        if (/^From [a-z0-9]{40} .*$/) {
-            $fname = sprintf("%04d", $n++).".patch";
-            open FH, ">".$pdir."/".$fname;
-            $f=1;
-        }
-        if (/^---$/ && $f == 1) {
-            push @lines, $fname;
-            $f=0;
-        }
-        print FH;
-    }
-
+    my $num=0;
+    open( GIT, 'git format-patch -M -N --no-signature -o "'.$pdir.'" '.$tag.' |');
+    @lines=<GIT>;
+    close GIT;         # be done
     return @lines;
 };
 
@@ -33,11 +31,10 @@ my $datestr = strftime "%Y%m%d", gmtime;
 
 my $tag=shift;
 my $pdir=shift;
-$tag=`git describe --abbrev=0 --tags` if not defined $tag;
-chomp($tag);
+$tag=&last_tag if not defined $tag;
 my @patches=&create_patches($tag, $pdir);
 my $num=$#patches + 2;
-$tag=~s/[^0-9]+?([0-9]+)/$1/ if $tag !~ /\b[0-9a-f]{5,40}\b/;
+$tag=~s/[^0-9]+?([0-9]+)/$1/;
 my $release="$num.git$datestr";
 $release="1" if $num == 1;
 
@@ -45,15 +42,15 @@ while(<>) {
     if (/^Version:/) {
 	print "Version: $tag\n";
     }
-    elsif (/^%define dist_free_release/) {
-	print "%define dist_free_release $release\n";
+    elsif (/^Release:/) {
+	print "Release: $release%{?dist}\n";
     }
     elsif ((/^Source0:/) || (/^Source:/)) {
 	print $_;
 	$num=1;
 	for(@patches) {
 	    s/.*\///g;
-	    print "Patch$num: $_\n";
+	    print "Patch$num: $_";
 	    $num++;
 	}
 	print "\n";

install/Makefile

@@ -1,7 +0,0 @@
-all:
-	$(MAKE) -C ..
-
-clean:
-	$(MAKE) -C .. clean
-
-.PHONY: all clean

install/hashmap.c

@@ -1,729 +0,0 @@
-/***
-  This file is part of systemd.
-
-  Copyright 2010 Lennart Poettering
-
-  systemd is free software; you can redistribute it and/or modify it
-  under the terms of the GNU Lesser General Public License as published by
-  the Free Software Foundation; either version 2.1 of the License, or
-  (at your option) any later version.
-
-  systemd is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public License
-  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-***/
-
-#include <assert.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-
-#include "util.h"
-#include "hashmap.h"
-#include "macro.h"
-
-#define NBUCKETS 127
-
-struct hashmap_entry {
-        const void *key;
-        void *value;
-        struct hashmap_entry *bucket_next, *bucket_previous;
-        struct hashmap_entry *iterate_next, *iterate_previous;
-};
-
-struct Hashmap {
-        hash_func_t hash_func;
-        compare_func_t compare_func;
-
-        struct hashmap_entry *iterate_list_head, *iterate_list_tail;
-        unsigned n_entries;
-
-        bool from_pool;
-};
-
-#define BY_HASH(h) ((struct hashmap_entry**) ((uint8_t*) (h) + ALIGN(sizeof(Hashmap))))
-
-struct pool {
-        struct pool *next;
-        unsigned n_tiles;
-        unsigned n_used;
-};
-
-static struct pool *first_hashmap_pool = NULL;
-static void *first_hashmap_tile = NULL;
-
-static struct pool *first_entry_pool = NULL;
-static void *first_entry_tile = NULL;
-
-static void* allocate_tile(struct pool **first_pool, void **first_tile, size_t tile_size) {
-        unsigned i;
-
-        if (*first_tile) {
-                void *r;
-
-                r = *first_tile;
-                *first_tile = * (void**) (*first_tile);
-                return r;
-        }
-
-        if (_unlikely_(!*first_pool) || _unlikely_((*first_pool)->n_used >= (*first_pool)->n_tiles)) {
-                unsigned n;
-                size_t size;
-                struct pool *p;
-
-                n = *first_pool ? (*first_pool)->n_tiles : 0;
-                n = MAX(512U, n * 2);
-                size = PAGE_ALIGN(ALIGN(sizeof(struct pool)) + n*tile_size);
-                n = (size - ALIGN(sizeof(struct pool))) / tile_size;
-
-                p = malloc(size);
-                if (!p)
-                        return NULL;
-
-                p->next = *first_pool;
-                p->n_tiles = n;
-                p->n_used = 0;
-
-                *first_pool = p;
-        }
-
-        i = (*first_pool)->n_used++;
-
-        return ((uint8_t*) (*first_pool)) + ALIGN(sizeof(struct pool)) + i*tile_size;
-}
-
-static void deallocate_tile(void **first_tile, void *p) {
-        * (void**) p = *first_tile;
-        *first_tile = p;
-}
-
-#ifndef __OPTIMIZE__
-
-static void drop_pool(struct pool *p) {
-        while (p) {
-                struct pool *n;
-                n = p->next;
-                free(p);
-                p = n;
-        }
-}
-
-__attribute__((destructor)) static void cleanup_pool(void) {
-        /* Be nice to valgrind */
-
-        drop_pool(first_hashmap_pool);
-        drop_pool(first_entry_pool);
-}
-
-#endif
-
-unsigned string_hash_func(const void *p) {
-        unsigned hash = 5381;
-        const signed char *c;
-
-        /* DJB's hash function */
-
-        for (c = p; *c; c++)
-                hash = (hash << 5) + hash + (unsigned) *c;
-
-        return hash;
-}
-
-int string_compare_func(const void *a, const void *b) {
-        return strcmp(a, b);
-}
-
-unsigned trivial_hash_func(const void *p) {
-        return PTR_TO_UINT(p);
-}
-
-int trivial_compare_func(const void *a, const void *b) {
-        return a < b ? -1 : (a > b ? 1 : 0);
-}
-
-Hashmap *hashmap_new(hash_func_t hash_func, compare_func_t compare_func) {
-        bool b;
-        Hashmap *h;
-        size_t size;
-
-        b = is_main_thread();
-
-        size = ALIGN(sizeof(Hashmap)) + NBUCKETS * sizeof(struct hashmap_entry*);
-
-        if (b) {
-                h = allocate_tile(&first_hashmap_pool, &first_hashmap_tile, size);
-                if (!h)
-                        return NULL;
-
-                memset(h, 0, size);
-        } else {
-                h = malloc0(size);
-
-                if (!h)
-                        return NULL;
-        }
-
-        h->hash_func = hash_func ? hash_func : trivial_hash_func;
-        h->compare_func = compare_func ? compare_func : trivial_compare_func;
-
-        h->n_entries = 0;
-        h->iterate_list_head = h->iterate_list_tail = NULL;
-
-        h->from_pool = b;
-
-        return h;
-}
-
-int hashmap_ensure_allocated(Hashmap **h, hash_func_t hash_func, compare_func_t compare_func) {
-        assert(h);
-
-        if (*h)
-                return 0;
-
-        if (!(*h = hashmap_new(hash_func, compare_func)))
-                return -ENOMEM;
-
-        return 0;
-}
-
-static void link_entry(Hashmap *h, struct hashmap_entry *e, unsigned hash) {
-        assert(h);
-        assert(e);
-
-        /* Insert into hash table */
-        e->bucket_next = BY_HASH(h)[hash];
-        e->bucket_previous = NULL;
-        if (BY_HASH(h)[hash])
-                BY_HASH(h)[hash]->bucket_previous = e;
-        BY_HASH(h)[hash] = e;
-
-        /* Insert into iteration list */
-        e->iterate_previous = h->iterate_list_tail;
-        e->iterate_next = NULL;
-        if (h->iterate_list_tail) {
-                assert(h->iterate_list_head);
-                h->iterate_list_tail->iterate_next = e;
-        } else {
-                assert(!h->iterate_list_head);
-                h->iterate_list_head = e;
-        }
-        h->iterate_list_tail = e;
-
-        h->n_entries++;
-        assert(h->n_entries >= 1);
-}
-
-static void unlink_entry(Hashmap *h, struct hashmap_entry *e, unsigned hash) {
-        assert(h);
-        assert(e);
-
-        /* Remove from iteration list */
-        if (e->iterate_next)
-                e->iterate_next->iterate_previous = e->iterate_previous;
-        else
-                h->iterate_list_tail = e->iterate_previous;
-
-        if (e->iterate_previous)
-                e->iterate_previous->iterate_next = e->iterate_next;
-        else
-                h->iterate_list_head = e->iterate_next;
-
-        /* Remove from hash table bucket list */
-        if (e->bucket_next)
-                e->bucket_next->bucket_previous = e->bucket_previous;
-
-        if (e->bucket_previous)
-                e->bucket_previous->bucket_next = e->bucket_next;
-        else
-                BY_HASH(h)[hash] = e->bucket_next;
-
-        assert(h->n_entries >= 1);
-        h->n_entries--;
-}
-
-static void remove_entry(Hashmap *h, struct hashmap_entry *e) {
-        unsigned hash;
-
-        assert(h);
-        assert(e);
-
-        hash = h->hash_func(e->key) % NBUCKETS;
-
-        unlink_entry(h, e, hash);
-
-        if (h->from_pool)
-                deallocate_tile(&first_entry_tile, e);
-        else
-                free(e);
-}
-
-void hashmap_free(Hashmap*h) {
-
-        if (!h)
-                return;
-
-        hashmap_clear(h);
-
-        if (h->from_pool)
-                deallocate_tile(&first_hashmap_tile, h);
-        else
-                free(h);
-}
-
-void hashmap_free_free(Hashmap *h) {
-        void *p;
-
-        while ((p = hashmap_steal_first(h)))
-                free(p);
-
-        hashmap_free(h);
-}
-
-void hashmap_clear(Hashmap *h) {
-        if (!h)
-                return;
-
-        while (h->iterate_list_head)
-                remove_entry(h, h->iterate_list_head);
-}
-
-static struct hashmap_entry *hash_scan(Hashmap *h, unsigned hash, const void *key) {
-        struct hashmap_entry *e;
-        assert(h);
-        assert(hash < NBUCKETS);
-
-        for (e = BY_HASH(h)[hash]; e; e = e->bucket_next)
-                if (h->compare_func(e->key, key) == 0)
-                        return e;
-
-        return NULL;
-}
-
-int hashmap_put(Hashmap *h, const void *key, void *value) {
-        struct hashmap_entry *e;
-        unsigned hash;
-
-        assert(h);
-
-        hash = h->hash_func(key) % NBUCKETS;
-
-        if ((e = hash_scan(h, hash, key))) {
-
-                if (e->value == value)
-                        return 0;
-
-                return -EEXIST;
-        }
-
-        if (h->from_pool)
-                e = allocate_tile(&first_entry_pool, &first_entry_tile, sizeof(struct hashmap_entry));
-        else
-                e = new(struct hashmap_entry, 1);
-
-        if (!e)
-                return -ENOMEM;
-
-        e->key = key;
-        e->value = value;
-
-        link_entry(h, e, hash);
-
-        return 1;
-}
-
-int hashmap_replace(Hashmap *h, const void *key, void *value) {
-        struct hashmap_entry *e;
-        unsigned hash;
-
-        assert(h);
-
-        hash = h->hash_func(key) % NBUCKETS;
-
-        if ((e = hash_scan(h, hash, key))) {
-                e->key = key;
-                e->value = value;
-                return 0;
-        }
-
-        return hashmap_put(h, key, value);
-}
-
-void* hashmap_get(Hashmap *h, const void *key) {
-        unsigned hash;
-        struct hashmap_entry *e;
-
-        if (!h)
-                return NULL;
-
-        hash = h->hash_func(key) % NBUCKETS;
-
-        if (!(e = hash_scan(h, hash, key)))
-                return NULL;
-
-        return e->value;
-}
-
-void* hashmap_remove(Hashmap *h, const void *key) {
-        struct hashmap_entry *e;
-        unsigned hash;
-        void *data;
-
-        if (!h)
-                return NULL;
-
-        hash = h->hash_func(key) % NBUCKETS;
-
-        if (!(e = hash_scan(h, hash, key)))
-                return NULL;
-
-        data = e->value;
-        remove_entry(h, e);
-
-        return data;
-}
-
-int hashmap_remove_and_put(Hashmap *h, const void *old_key, const void *new_key, void *value) {
-        struct hashmap_entry *e;
-        unsigned old_hash, new_hash;
-
-        if (!h)
-                return -ENOENT;
-
-        old_hash = h->hash_func(old_key) % NBUCKETS;
-        if (!(e = hash_scan(h, old_hash, old_key)))
-                return -ENOENT;
-
-        new_hash = h->hash_func(new_key) % NBUCKETS;
-        if (hash_scan(h, new_hash, new_key))
-                return -EEXIST;
-
-        unlink_entry(h, e, old_hash);
-
-        e->key = new_key;
-        e->value = value;
-
-        link_entry(h, e, new_hash);
-
-        return 0;
-}
-
-int hashmap_remove_and_replace(Hashmap *h, const void *old_key, const void *new_key, void *value) {
-        struct hashmap_entry *e, *k;
-        unsigned old_hash, new_hash;
-
-        if (!h)
-                return -ENOENT;
-
-        old_hash = h->hash_func(old_key) % NBUCKETS;
-        if (!(e = hash_scan(h, old_hash, old_key)))
-                return -ENOENT;
-
-        new_hash = h->hash_func(new_key) % NBUCKETS;
-
-        if ((k = hash_scan(h, new_hash, new_key)))
-                if (e != k)
-                        remove_entry(h, k);
-
-        unlink_entry(h, e, old_hash);
-
-        e->key = new_key;
-        e->value = value;
-
-        link_entry(h, e, new_hash);
-
-        return 0;
-}
-
-void* hashmap_remove_value(Hashmap *h, const void *key, void *value) {
-        struct hashmap_entry *e;
-        unsigned hash;
-
-        if (!h)
-                return NULL;
-
-        hash = h->hash_func(key) % NBUCKETS;
-
-        if (!(e = hash_scan(h, hash, key)))
-                return NULL;
-
-        if (e->value != value)
-                return NULL;
-
-        remove_entry(h, e);
-
-        return value;
-}
-
-void *hashmap_iterate(Hashmap *h, Iterator *i, const void **key) {
-        struct hashmap_entry *e;
-
-        assert(i);
-
-        if (!h)
-                goto at_end;
-
-        if (*i == ITERATOR_LAST)
-                goto at_end;
-
-        if (*i == ITERATOR_FIRST && !h->iterate_list_head)
-                goto at_end;
-
-        e = *i == ITERATOR_FIRST ? h->iterate_list_head : (struct hashmap_entry*) *i;
-
-        if (e->iterate_next)
-                *i = (Iterator) e->iterate_next;
-        else
-                *i = ITERATOR_LAST;
-
-        if (key)
-                *key = e->key;
-
-        return e->value;
-
-at_end:
-        *i = ITERATOR_LAST;
-
-        if (key)
-                *key = NULL;
-
-        return NULL;
-}
-
-void *hashmap_iterate_backwards(Hashmap *h, Iterator *i, const void **key) {
-        struct hashmap_entry *e;
-
-        assert(i);
-
-        if (!h)
-                goto at_beginning;
-
-        if (*i == ITERATOR_FIRST)
-                goto at_beginning;
-
-        if (*i == ITERATOR_LAST && !h->iterate_list_tail)
-                goto at_beginning;
-
-        e = *i == ITERATOR_LAST ? h->iterate_list_tail : (struct hashmap_entry*) *i;
-
-        if (e->iterate_previous)
-                *i = (Iterator) e->iterate_previous;
-        else
-                *i = ITERATOR_FIRST;
-
-        if (key)
-                *key = e->key;
-
-        return e->value;
-
-at_beginning:
-        *i = ITERATOR_FIRST;
-
-        if (key)
-                *key = NULL;
-
-        return NULL;
-}
-
-void *hashmap_iterate_skip(Hashmap *h, const void *key, Iterator *i) {
-        unsigned hash;
-        struct hashmap_entry *e;
-
-        if (!h)
-                return NULL;
-
-        hash = h->hash_func(key) % NBUCKETS;
-
-        if (!(e = hash_scan(h, hash, key)))
-                return NULL;
-
-        *i = (Iterator) e;
-
-        return e->value;
-}
-
-void* hashmap_first(Hashmap *h) {
-
-        if (!h)
-                return NULL;
-
-        if (!h->iterate_list_head)
-                return NULL;
-
-        return h->iterate_list_head->value;
-}
-
-void* hashmap_first_key(Hashmap *h) {
-
-        if (!h)
-                return NULL;
-
-        if (!h->iterate_list_head)
-                return NULL;
-
-        return (void*) h->iterate_list_head->key;
-}
-
-void* hashmap_last(Hashmap *h) {
-
-        if (!h)
-                return NULL;
-
-        if (!h->iterate_list_tail)
-                return NULL;
-
-        return h->iterate_list_tail->value;
-}
-
-void* hashmap_steal_first(Hashmap *h) {
-        void *data;
-
-        if (!h)
-                return NULL;
-
-        if (!h->iterate_list_head)
-                return NULL;
-
-        data = h->iterate_list_head->value;
-        remove_entry(h, h->iterate_list_head);
-
-        return data;
-}
-
-void* hashmap_steal_first_key(Hashmap *h) {
-        void *key;
-
-        if (!h)
-                return NULL;
-
-        if (!h->iterate_list_head)
-                return NULL;
-
-        key = (void*) h->iterate_list_head->key;
-        remove_entry(h, h->iterate_list_head);
-
-        return key;
-}
-
-unsigned hashmap_size(Hashmap *h) {
-
-        if (!h)
-                return 0;
-
-        return h->n_entries;
-}
-
-bool hashmap_isempty(Hashmap *h) {
-
-        if (!h)
-                return true;
-
-        return h->n_entries == 0;
-}
-
-int hashmap_merge(Hashmap *h, Hashmap *other) {
-        struct hashmap_entry *e;
-
-        assert(h);
-
-        if (!other)
-                return 0;
-
-        for (e = other->iterate_list_head; e; e = e->iterate_next) {
-                int r;
-
-                if ((r = hashmap_put(h, e->key, e->value)) < 0)
-                        if (r != -EEXIST)
-                                return r;
-        }
-
-        return 0;
-}
-
-void hashmap_move(Hashmap *h, Hashmap *other) {
-        struct hashmap_entry *e, *n;
-
-        assert(h);
-
-        /* The same as hashmap_merge(), but every new item from other
-         * is moved to h. This function is guaranteed to succeed. */
-
-        if (!other)
-                return;
-
-        for (e = other->iterate_list_head; e; e = n) {
-                unsigned h_hash, other_hash;
-
-                n = e->iterate_next;
-
-                h_hash = h->hash_func(e->key) % NBUCKETS;
-
-                if (hash_scan(h, h_hash, e->key))
-                        continue;
-
-                other_hash = other->hash_func(e->key) % NBUCKETS;
-
-                unlink_entry(other, e, other_hash);
-                link_entry(h, e, h_hash);
-        }
-}
-
-int hashmap_move_one(Hashmap *h, Hashmap *other, const void *key) {
-        unsigned h_hash, other_hash;
-        struct hashmap_entry *e;
-
-        if (!other)
-                return 0;
-
-        assert(h);
-
-        h_hash = h->hash_func(key) % NBUCKETS;
-        if (hash_scan(h, h_hash, key))
-                return -EEXIST;
-
-        other_hash = other->hash_func(key) % NBUCKETS;
-        if (!(e = hash_scan(other, other_hash, key)))
-                return -ENOENT;
-
-        unlink_entry(other, e, other_hash);
-        link_entry(h, e, h_hash);
-
-        return 0;
-}
-
-Hashmap *hashmap_copy(Hashmap *h) {
-        Hashmap *copy;
-
-        assert(h);
-
-        if (!(copy = hashmap_new(h->hash_func, h->compare_func)))
-                return NULL;
-
-        if (hashmap_merge(copy, h) < 0) {
-                hashmap_free(copy);
-                return NULL;
-        }
-
-        return copy;
-}
-
-char **hashmap_get_strv(Hashmap *h) {
-        char **sv;
-        Iterator it;
-        char *item;
-        int n;
-
-        sv = new(char*, h->n_entries+1);
-        if (!sv)
-                return NULL;
-
-        n = 0;
-        HASHMAP_FOREACH(item, h, it)
-                sv[n++] = item;
-        sv[n] = NULL;
-
-        return sv;
-}

install/hashmap.h

@@ -1,89 +0,0 @@
-#ifndef foohashmaphfoo
-#define foohashmaphfoo
-
-/***
-  This file is part of systemd.
-
-  Copyright 2010 Lennart Poettering
-
-  systemd is free software; you can redistribute it and/or modify it
-  under the terms of the GNU Lesser General Public License as published by
-  the Free Software Foundation; either version 2.1 of the License, or
-  (at your option) any later version.
-
-  systemd is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public License
-  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-***/
-
-#include <stdbool.h>
-
-/* Pretty straightforward hash table implementation. As a minor
- * optimization a NULL hashmap object will be treated as empty hashmap
- * for all read operations. That way it is not necessary to
- * instantiate an object for each Hashmap use. */
-
-typedef struct Hashmap Hashmap;
-typedef struct _IteratorStruct _IteratorStruct;
-typedef _IteratorStruct* Iterator;
-
-#define ITERATOR_FIRST ((Iterator) 0)
-#define ITERATOR_LAST ((Iterator) -1)
-
-typedef unsigned (*hash_func_t)(const void *p);
-typedef int (*compare_func_t)(const void *a, const void *b);
-
-unsigned string_hash_func(const void *p);
-int string_compare_func(const void *a, const void *b);
-
-unsigned trivial_hash_func(const void *p);
-int trivial_compare_func(const void *a, const void *b);
-
-Hashmap *hashmap_new(hash_func_t hash_func, compare_func_t compare_func);
-void hashmap_free(Hashmap *h);
-void hashmap_free_free(Hashmap *h);
-Hashmap *hashmap_copy(Hashmap *h);
-int hashmap_ensure_allocated(Hashmap **h, hash_func_t hash_func, compare_func_t compare_func);
-
-int hashmap_put(Hashmap *h, const void *key, void *value);
-int hashmap_replace(Hashmap *h, const void *key, void *value);
-void* hashmap_get(Hashmap *h, const void *key);
-void* hashmap_remove(Hashmap *h, const void *key);
-void* hashmap_remove_value(Hashmap *h, const void *key, void *value);
-int hashmap_remove_and_put(Hashmap *h, const void *old_key, const void *new_key, void *value);
-int hashmap_remove_and_replace(Hashmap *h, const void *old_key, const void *new_key, void *value);
-
-int hashmap_merge(Hashmap *h, Hashmap *other);
-void hashmap_move(Hashmap *h, Hashmap *other);
-int hashmap_move_one(Hashmap *h, Hashmap *other, const void *key);
-
-unsigned hashmap_size(Hashmap *h);
-bool hashmap_isempty(Hashmap *h);
-
-void *hashmap_iterate(Hashmap *h, Iterator *i, const void **key);
-void *hashmap_iterate_backwards(Hashmap *h, Iterator *i, const void **key);
-void *hashmap_iterate_skip(Hashmap *h, const void *key, Iterator *i);
-
-void hashmap_clear(Hashmap *h);
-void *hashmap_steal_first(Hashmap *h);
-void *hashmap_steal_first_key(Hashmap *h);
-void* hashmap_first(Hashmap *h);
-void* hashmap_first_key(Hashmap *h);
-void* hashmap_last(Hashmap *h);
-
-char **hashmap_get_strv(Hashmap *h);
-
-#define HASHMAP_FOREACH(e, h, i) \
-        for ((i) = ITERATOR_FIRST, (e) = hashmap_iterate((h), &(i), NULL); (e); (e) = hashmap_iterate((h), &(i), NULL))
-
-#define HASHMAP_FOREACH_KEY(e, k, h, i) \
-        for ((i) = ITERATOR_FIRST, (e) = hashmap_iterate((h), &(i), (const void**) &(k)); (e); (e) = hashmap_iterate((h), &(i), (const void**) &(k)))
-
-#define HASHMAP_FOREACH_BACKWARDS(e, h, i) \
-        for ((i) = ITERATOR_LAST, (e) = hashmap_iterate_backwards((h), &(i), NULL); (e); (e) = hashmap_iterate_backwards((h), &(i), NULL))
-
-#endif

install/hashmap.lo

@@ -1,12 +0,0 @@
-# src/shared/hashmap.lo - a libtool object file
-# Generated by libtool (GNU libtool) 2.4.2
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-pic_object='.libs/hashmap.o'
-
-# Name of the non-PIC object
-non_pic_object='hashmap.o'
-

install/log.c

@@ -1,293 +0,0 @@
-/***
-  This file is part of systemd.
-
-  Copyright 2010 Lennart Poettering
-
-  systemd is free software; you can redistribute it and/or modify it
-  under the terms of the GNU Lesser General Public License as published by
-  the Free Software Foundation; either version 2.1 of the License, or
-  (at your option) any later version.
-
-  systemd is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public License
-  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-***/
-
-#include <stdarg.h>
-#include <stdio.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/socket.h>
-#include <sys/un.h>
-#include <stddef.h>
-
-#include "log.h"
-#include "util.h"
-#include "macro.h"
-
-#define SNDBUF_SIZE (8*1024*1024)
-
-static LogTarget log_target = LOG_TARGET_CONSOLE;
-static int log_max_level = LOG_WARNING;
-static int log_facility = LOG_DAEMON;
-
-static int console_fd = STDERR_FILENO;
-
-static bool show_location = false;
-
-/* Akin to glibc's __abort_msg; which is private and we hence cannot
- * use here. */
-static char *log_abort_msg = NULL;
-
-void log_close_console(void) {
-
-        if (console_fd < 0)
-                return;
-
-        if (getpid() == 1) {
-                if (console_fd >= 3)
-                        close_nointr_nofail(console_fd);
-
-                console_fd = -1;
-        }
-}
-
-static int log_open_console(void) {
-
-        if (console_fd >= 0)
-                return 0;
-
-        if (getpid() == 1) {
-
-                console_fd = open_terminal("/dev/console", O_WRONLY|O_NOCTTY|O_CLOEXEC);
-                if (console_fd < 0) {
-                        log_error("Failed to open /dev/console for logging: %s", strerror(-console_fd));
-                        return console_fd;
-                }
-
-                log_debug("Successfully opened /dev/console for logging.");
-        } else
-                console_fd = STDERR_FILENO;
-
-        return 0;
-}
-
-
-int log_open(void) {
-        return log_open_console();
-}
-
-
-void log_close(void) {
-        log_close_console();
-}
-
-
-void log_set_max_level(int level) {
-        assert((level & LOG_PRIMASK) == level);
-
-        log_max_level = level;
-}
-
-void log_set_facility(int facility) {
-        log_facility = facility;
-}
-
-static int write_to_console(
-                int level,
-                const char*file,
-                unsigned int line,
-                const char *func,
-                const char *buffer) {
-
-        struct iovec iovec[5];
-        unsigned n = 0;
-
-        if (console_fd < 0)
-                return 0;
-
-        zero(iovec);
-
-        IOVEC_SET_STRING(iovec[n++], "dracut-install: ");
-
-        if (show_location) {
-                char location[64];
-                if (snprintf(location, sizeof(location), "(%s:%u) ", file, line) <= 0)
-                        return -errno;
-                IOVEC_SET_STRING(iovec[n++], location);
-        }
-
-        IOVEC_SET_STRING(iovec[n++], buffer);
-        IOVEC_SET_STRING(iovec[n++], "\n");
-
-        if (writev(console_fd, iovec, n) < 0)
-                return -errno;
-
-        return 1;
-}
-
-static int log_dispatch(
-        int level,
-        const char*file,
-        int line,
-        const char *func,
-        char *buffer) {
-
-        int r = 0;
-
-        if (log_target == LOG_TARGET_NULL)
-                return 0;
-
-        /* Patch in LOG_DAEMON facility if necessary */
-        if ((level & LOG_FACMASK) == 0)
-                level = log_facility | LOG_PRI(level);
-
-        do {
-                char *e;
-                int k = 0;
-
-                buffer += strspn(buffer, NEWLINE);
-
-                if (buffer[0] == 0)
-                        break;
-
-                if ((e = strpbrk(buffer, NEWLINE)))
-                        *(e++) = 0;
-
-                k = write_to_console(level, file, line, func, buffer);
-                if (k < 0)
-                        return k;
-                buffer = e;
-        } while (buffer);
-
-        return r;
-}
-
-int log_metav(
-        int level,
-        const char*file,
-        int line,
-        const char *func,
-        const char *format,
-        va_list ap) {
-
-        char buffer[LINE_MAX];
-        int saved_errno, r;
-
-        if (_likely_(LOG_PRI(level) > log_max_level))
-                return 0;
-
-        saved_errno = errno;
-        vsnprintf(buffer, sizeof(buffer), format, ap);
-        char_array_0(buffer);
-
-        r = log_dispatch(level, file, line, func, buffer);
-        errno = saved_errno;
-
-        return r;
-}
-
-int log_meta(
-        int level,
-        const char*file,
-        int line,
-        const char *func,
-        const char *format, ...) {
-
-        int r;
-        va_list ap;
-
-        va_start(ap, format);
-        r = log_metav(level, file, line, func, format, ap);
-        va_end(ap);
-
-        return r;
-}
-
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wformat-nonliteral"
-_noreturn_ static void log_assert(const char *text, const char *file, int line, const char *func, const char *format) {
-        static char buffer[LINE_MAX];
-
-        snprintf(buffer, sizeof(buffer), format, text, file, line, func);
-
-        char_array_0(buffer);
-        log_abort_msg = buffer;
-
-        log_dispatch(LOG_CRIT, file, line, func, buffer);
-        abort();
-}
-#pragma GCC diagnostic pop
-
-_noreturn_ void log_assert_failed(const char *text, const char *file, int line, const char *func) {
-        log_assert(text, file, line, func, "Assertion '%s' failed at %s:%u, function %s(). Aborting.");
-}
-
-_noreturn_ void log_assert_failed_unreachable(const char *text, const char *file, int line, const char *func) {
-        log_assert(text, file, line, func, "Code should not be reached '%s' at %s:%u, function %s(). Aborting.");
-}
-
-void log_set_target(LogTarget target) {
-        assert(target >= 0);
-        assert(target < _LOG_TARGET_MAX);
-
-        log_target = target;
-}
-
-int log_set_target_from_string(const char *e) {
-        LogTarget t;
-
-        t = log_target_from_string(e);
-        if (t < 0)
-                return -EINVAL;
-
-        log_set_target(t);
-        return 0;
-}
-
-int log_set_max_level_from_string(const char *e) {
-        int t;
-
-        t = log_level_from_string(e);
-        if (t < 0)
-                return t;
-
-        log_set_max_level(t);
-        return 0;
-}
-
-void log_parse_environment(void) {
-        const char *e;
-
-        if ((e = getenv("DRACUT_LOG_TARGET")))
-                if (log_set_target_from_string(e) < 0)
-                        log_warning("Failed to parse log target %s. Ignoring.", e);
-
-        if ((e = getenv("DRACUT_LOG_LEVEL")))
-                if (log_set_max_level_from_string(e) < 0)
-                        log_warning("Failed to parse log level %s. Ignoring.", e);
-
-}
-
-LogTarget log_get_target(void) {
-        return log_target;
-}
-
-int log_get_max_level(void) {
-        return log_max_level;
-}
-
-
-static const char *const log_target_table[] = {
-        [LOG_TARGET_CONSOLE] = "console",
-        [LOG_TARGET_AUTO] = "auto",
-        [LOG_TARGET_SAFE] = "safe",
-        [LOG_TARGET_NULL] = "null"
-};
-
-DEFINE_STRING_TABLE_LOOKUP(log_target, LogTarget);

install/log.h

@@ -1,113 +0,0 @@
-#ifndef foologhfoo
-#define foologhfoo
-
-/***
-  This file is part of systemd.
-
-  Copyright 2010 Lennart Poettering
-
-  systemd is free software; you can redistribute it and/or modify it
-  under the terms of the GNU Lesser General Public License as published by
-  the Free Software Foundation; either version 2.1 of the License, or
-  (at your option) any later version.
-
-  systemd is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public License
-  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-***/
-
-#include <syslog.h>
-#include <stdbool.h>
-#include <stdarg.h>
-
-#include "macro.h"
-
-typedef enum LogTarget{
-        LOG_TARGET_CONSOLE,
-        LOG_TARGET_KMSG,
-        LOG_TARGET_JOURNAL,
-        LOG_TARGET_JOURNAL_OR_KMSG,
-        LOG_TARGET_SYSLOG,
-        LOG_TARGET_SYSLOG_OR_KMSG,
-        LOG_TARGET_AUTO, /* console if stderr is tty, JOURNAL_OR_KMSG otherwise */
-        LOG_TARGET_SAFE, /* console if stderr is tty, KMSG otherwise */
-        LOG_TARGET_NULL,
-        _LOG_TARGET_MAX,
-        _LOG_TARGET_INVALID = -1
-}  LogTarget;
-
-void log_set_target(LogTarget target);
-void log_set_max_level(int level);
-void log_set_facility(int facility);
-
-int log_set_target_from_string(const char *e);
-int log_set_max_level_from_string(const char *e);
-
-void log_show_color(bool b);
-void log_show_location(bool b);
-
-int log_show_color_from_string(const char *e);
-int log_show_location_from_string(const char *e);
-
-LogTarget log_get_target(void);
-int log_get_max_level(void);
-
-int log_open(void);
-void log_close(void);
-void log_forget_fds(void);
-
-void log_close_syslog(void);
-void log_close_journal(void);
-void log_close_kmsg(void);
-void log_close_console(void);
-
-void log_parse_environment(void);
-
-int log_meta(
-        int level,
-        const char*file,
-        int line,
-        const char *func,
-        const char *format, ...) _printf_attr_(5,6);
-
-int log_metav(
-        int level,
-        const char*file,
-        int line,
-        const char *func,
-        const char *format,
-        va_list ap);
-
-_noreturn_ void log_assert_failed(const char *text, const char *file, int line, const char *func);
-_noreturn_ void log_assert_failed_unreachable(const char *text, const char *file, int line, const char *func);
-
-/* This modifies the buffer passed! */
-int log_dump_internal(
-        int level,
-        const char*file,
-        int line,
-        const char *func,
-        char *buffer);
-
-#define log_full(level, ...) log_meta(level,   __FILE__, __LINE__, __func__, __VA_ARGS__)
-
-#define log_debug(...)   log_meta(LOG_DEBUG,   __FILE__, __LINE__, __func__, __VA_ARGS__)
-#define log_info(...)    log_meta(LOG_INFO,    __FILE__, __LINE__, __func__, __VA_ARGS__)
-#define log_notice(...)  log_meta(LOG_NOTICE,  __FILE__, __LINE__, __func__, __VA_ARGS__)
-#define log_warning(...) log_meta(LOG_WARNING, __FILE__, __LINE__, __func__, __VA_ARGS__)
-#define log_error(...)   log_meta(LOG_ERR,     __FILE__, __LINE__, __func__, __VA_ARGS__)
-
-/* This modifies the buffer passed! */
-#define log_dump(level, buffer) log_dump_internal(level, __FILE__, __LINE__, __func__, buffer)
-
-const char *log_target_to_string(LogTarget target);
-LogTarget log_target_from_string(const char *s);
-
-const char *log_level_to_string(int i);
-int log_level_from_string(const char *s);
-
-#endif

install/macro.h

@@ -1,282 +0,0 @@
-#pragma once
-
-/***
-  This file is part of systemd.
-
-  Copyright 2010 Lennart Poettering
-
-  systemd is free software; you can redistribute it and/or modify it
-  under the terms of the GNU Lesser General Public License as published by
-  the Free Software Foundation; either version 2.1 of the License, or
-  (at your option) any later version.
-
-  systemd is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public License
-  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-***/
-
-#include <assert.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/uio.h>
-#include <inttypes.h>
-
-#define _printf_attr_(a,b) __attribute__ ((format (printf, a, b)))
-#define _sentinel_ __attribute__ ((sentinel))
-#define _noreturn_ __attribute__((noreturn))
-#define _unused_ __attribute__ ((unused))
-#define _destructor_ __attribute__ ((destructor))
-#define _pure_ __attribute__ ((pure))
-#define _const_ __attribute__ ((const))
-#define _deprecated_ __attribute__ ((deprecated))
-#define _packed_ __attribute__ ((packed))
-#define _malloc_ __attribute__ ((malloc))
-#define _weak_ __attribute__ ((weak))
-#define _likely_(x) (__builtin_expect(!!(x),1))
-#define _unlikely_(x) (__builtin_expect(!!(x),0))
-#define _public_ __attribute__ ((visibility("default")))
-#define _hidden_ __attribute__ ((visibility("hidden")))
-#define _weakref_(x) __attribute__((weakref(#x)))
-#define _introspect_(x) __attribute__((section("introspect." x)))
-#define _alignas_(x) __attribute__((aligned(__alignof(x))))
-#define _cleanup_(x) __attribute__((cleanup(x)))
-
-/* automake test harness */
-#define EXIT_TEST_SKIP 77
-
-#define XSTRINGIFY(x) #x
-#define STRINGIFY(x) XSTRINGIFY(x)
-
-/* Rounds up */
-
-#define ALIGN4(l) (((l) + 3) & ~3)
-#define ALIGN8(l) (((l) + 7) & ~7)
-
-#if __SIZEOF_POINTER__ == 8
-#define ALIGN(l) ALIGN8(l)
-#elif __SIZEOF_POINTER__ == 4
-#define ALIGN(l) ALIGN4(l)
-#else
-#error "Wut? Pointers are neither 4 nor 8 bytes long?"
-#endif
-
-#define ALIGN_PTR(p) ((void*) ALIGN((unsigned long) p))
-#define ALIGN4_PTR(p) ((void*) ALIGN4((unsigned long) p))
-#define ALIGN8_PTR(p) ((void*) ALIGN8((unsigned long) p))
-
-static inline size_t ALIGN_TO(size_t l, size_t ali) {
-        return ((l + ali - 1) & ~(ali - 1));
-}
-
-#define ALIGN_TO_PTR(p, ali) ((void*) ALIGN_TO((unsigned long) p))
-
-#define ELEMENTSOF(x) (sizeof(x)/sizeof((x)[0]))
-
-/*
- * container_of - cast a member of a structure out to the containing structure
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member)                                 \
-        __extension__ ({                                                \
-                        const typeof( ((type *)0)->member ) *__mptr = (ptr); \
-                        (type *)( (char *)__mptr - offsetof(type,member) ); \
-                })
-
-#undef MAX
-#define MAX(a,b)                                 \
-        __extension__ ({                         \
-                        typeof(a) _a = (a);      \
-                        typeof(b) _b = (b);      \
-                        _a > _b ? _a : _b;       \
-                })
-
-#define MAX3(x,y,z)                              \
-        __extension__ ({                         \
-                        typeof(x) _c = MAX(x,y); \
-                        MAX(_c, z);              \
-                })
-
-#undef MIN
-#define MIN(a,b)                                \
-        __extension__ ({                        \
-                        typeof(a) _a = (a);     \
-                        typeof(b) _b = (b);     \
-                        _a < _b ? _a : _b;      \
-                })
-
-#ifndef CLAMP
-#define CLAMP(x, low, high)                                             \
-        __extension__ ({                                                \
-                        typeof(x) _x = (x);                             \
-                        typeof(low) _low = (low);                       \
-                        typeof(high) _high = (high);                    \
-                        ((_x > _high) ? _high : ((_x < _low) ? _low : _x)); \
-                })
-#endif
-
-#define assert_se(expr)                                                 \
-        do {                                                            \
-                if (_unlikely_(!(expr)))                                \
-                        log_assert_failed(#expr, __FILE__, __LINE__, __PRETTY_FUNCTION__); \
-        } while (false)                                                 \
-
-/* We override the glibc assert() here. */
-#undef assert
-#ifdef NDEBUG
-#define assert(expr) do {} while(false)
-#else
-#define assert(expr) assert_se(expr)
-#endif
-
-#define assert_not_reached(t)                                           \
-        do {                                                            \
-                log_assert_failed_unreachable(t, __FILE__, __LINE__, __PRETTY_FUNCTION__); \
-        } while (false)
-
-#if defined(static_assert)
-#define assert_cc(expr)                         \
-        do {                                    \
-                static_assert(expr, #expr);     \
-        } while (false)
-#else
-#define assert_cc(expr)                         \
-        do {                                    \
-                switch (0) {                    \
-                case 0:                         \
-                case !!(expr):                  \
-                        ;                       \
-                }                               \
-        } while (false)
-#endif
-
-#define PTR_TO_UINT(p) ((unsigned int) ((uintptr_t) (p)))
-#define UINT_TO_PTR(u) ((void*) ((uintptr_t) (u)))
-
-#define PTR_TO_UINT32(p) ((uint32_t) ((uintptr_t) (p)))
-#define UINT32_TO_PTR(u) ((void*) ((uintptr_t) (u)))
-
-#define PTR_TO_ULONG(p) ((unsigned long) ((uintptr_t) (p)))
-#define ULONG_TO_PTR(u) ((void*) ((uintptr_t) (u)))
-
-#define PTR_TO_INT(p) ((int) ((intptr_t) (p)))
-#define INT_TO_PTR(u) ((void*) ((intptr_t) (u)))
-
-#define TO_INT32(p) ((int32_t) ((intptr_t) (p)))
-#define INT32_TO_PTR(u) ((void*) ((intptr_t) (u)))
-
-#define PTR_TO_LONG(p) ((long) ((intptr_t) (p)))
-#define LONG_TO_PTR(u) ((void*) ((intptr_t) (u)))
-
-#define memzero(x,l) (memset((x), 0, (l)))
-#define zero(x) (memzero(&(x), sizeof(x)))
-
-#define CHAR_TO_STR(x) ((char[2]) { x, 0 })
-
-#define char_array_0(x) x[sizeof(x)-1] = 0;
-
-#define IOVEC_SET_STRING(i, s)                  \
-        do {                                    \
-                struct iovec *_i = &(i);        \
-                char *_s = (char *)(s);         \
-                _i->iov_base = _s;              \
-                _i->iov_len = strlen(_s);       \
-        } while(false)
-
-static inline size_t IOVEC_TOTAL_SIZE(const struct iovec *i, unsigned n) {
-        unsigned j;
-        size_t r = 0;
-
-        for (j = 0; j < n; j++)
-                r += i[j].iov_len;
-
-        return r;
-}
-
-static inline size_t IOVEC_INCREMENT(struct iovec *i, unsigned n, size_t k) {
-        unsigned j;
-
-        for (j = 0; j < n; j++) {
-                size_t sub;
-
-                if (_unlikely_(k == 0))
-                        break;
-
-                sub = MIN(i[j].iov_len, k);
-                i[j].iov_len -= sub;
-                i[j].iov_base = (uint8_t*) i[j].iov_base + sub;
-                k -= sub;
-        }
-
-        return k;
-}
-
-#define VA_FORMAT_ADVANCE(format, ap)                                   \
-do {                                                                    \
-        int _argtypes[128];                                             \
-        size_t _i, _k;                                                  \
-        _k = parse_printf_format((format), ELEMENTSOF(_argtypes), _argtypes); \
-        assert(_k < ELEMENTSOF(_argtypes));                             \
-        for (_i = 0; _i < _k; _i++) {                                   \
-                if (_argtypes[_i] & PA_FLAG_PTR)  {                     \
-                        (void) va_arg(ap, void*);                       \
-                        continue;                                       \
-                }                                                       \
-                                                                        \
-                switch (_argtypes[_i]) {                                \
-                case PA_INT:                                            \
-                case PA_INT|PA_FLAG_SHORT:                              \
-                case PA_CHAR:                                           \
-                        (void) va_arg(ap, int);                         \
-                        break;                                          \
-                case PA_INT|PA_FLAG_LONG:                               \
-                        (void) va_arg(ap, long int);                    \
-                        break;                                          \
-                case PA_INT|PA_FLAG_LONG_LONG:                          \
-                        (void) va_arg(ap, long long int);               \
-                        break;                                          \
-                case PA_WCHAR:                                          \
-                        (void) va_arg(ap, wchar_t);                     \
-                        break;                                          \
-                case PA_WSTRING:                                        \
-                case PA_STRING:                                         \
-                case PA_POINTER:                                        \
-                        (void) va_arg(ap, void*);                       \
-                        break;                                          \
-                case PA_FLOAT:                                          \
-                case PA_DOUBLE:                                         \
-                        (void) va_arg(ap, double);                      \
-                        break;                                          \
-                case PA_DOUBLE|PA_FLAG_LONG_DOUBLE:                     \
-                        (void) va_arg(ap, long double);                 \
-                        break;                                          \
-                default:                                                \
-                        assert_not_reached("Unknown format string argument."); \
-                }                                                       \
-        }                                                               \
-} while(false)
-
- /* Because statfs.t_type can be int on some architecures, we have to cast
-  * the const magic to the type, otherwise the compiler warns about
-  * signed/unsigned comparison, because the magic can be 32 bit unsigned.
- */
-#define F_TYPE_CMP(a, b) (a == (typeof(a)) b)
-
-
-/* Returns the number of chars needed to format variables of the
- * specified type as a decimal string. Adds in extra space for a
- * negative '-' prefix. */
-
-#define DECIMAL_STR_MAX(type)                                           \
-        (1+(sizeof(type) <= 1 ? 3 :                                     \
-            sizeof(type) <= 2 ? 5 :                                     \
-            sizeof(type) <= 4 ? 10 :                                    \
-            sizeof(type) <= 8 ? 20 : sizeof(int[-2*(sizeof(type) > 8)])))
-
-#include "log.h"

install/strv.c

@@ -1,585 +0,0 @@
-/***
-  This file is part of systemd.
-
-  Copyright 2010 Lennart Poettering
-
-  systemd is free software; you can redistribute it and/or modify it
-  under the terms of the GNU Lesser General Public License as published by
-  the Free Software Foundation; either version 2.1 of the License, or
-  (at your option) any later version.
-
-  systemd is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public License
-  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-***/
-
-#include <assert.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <errno.h>
-
-#include "util.h"
-#include "strv.h"
-
-char *strv_find(char **l, const char *name) {
-        char **i;
-
-        assert(name);
-
-        STRV_FOREACH(i, l)
-                if (streq(*i, name))
-                        return *i;
-
-        return NULL;
-}
-
-char *strv_find_prefix(char **l, const char *name) {
-        char **i;
-
-        assert(name);
-
-        STRV_FOREACH(i, l)
-                if (startswith(*i, name))
-                        return *i;
-
-        return NULL;
-}
-
-void strv_free(char **l) {
-        char **k;
-
-        if (!l)
-                return;
-
-        for (k = l; *k; k++)
-                free(*k);
-
-        free(l);
-}
-
-char **strv_copy(char * const *l) {
-        char **r, **k;
-
-        k = r = new(char*, strv_length(l) + 1);
-        if (!r)
-                return NULL;
-
-        if (l)
-                for (; *l; k++, l++) {
-                        *k = strdup(*l);
-                        if (!*k) {
-                                strv_free(r);
-                                return NULL;
-                        }
-                }
-
-        *k = NULL;
-        return r;
-}
-
-unsigned int strv_length(char * const *l) {
-        unsigned n = 0;
-
-        if (!l)
-                return 0;
-
-        for (; *l; l++)
-                n++;
-
-        return n;
-}
-
-char **strv_new_ap(const char *x, va_list ap) {
-        const char *s;
-        char **a;
-        unsigned n = 0, i = 0;
-        va_list aq;
-
-        /* As a special trick we ignore all listed strings that equal
-         * (const char*) -1. This is supposed to be used with the
-         * STRV_IFNOTNULL() macro to include possibly NULL strings in
-         * the string list. */
-
-        if (x) {
-                n = x == (const char*) -1 ? 0 : 1;
-
-                va_copy(aq, ap);
-                while ((s = va_arg(aq, const char*))) {
-                        if (s == (const char*) -1)
-                                continue;
-
-                        n++;
-                }
-
-                va_end(aq);
-        }
-
-        a = new(char*, n+1);
-        if (!a)
-                return NULL;
-
-        if (x) {
-                if (x != (const char*) -1) {
-                        a[i] = strdup(x);
-                        if (!a[i])
-                                goto fail;
-                        i++;
-                }
-
-                while ((s = va_arg(ap, const char*))) {
-
-                        if (s == (const char*) -1)
-                                continue;
-
-                        a[i] = strdup(s);
-                        if (!a[i])
-                                goto fail;
-
-                        i++;
-                }
-        }
-
-        a[i] = NULL;
-
-        return a;
-
-fail:
-        strv_free(a);
-        return NULL;
-}
-
-char **strv_new(const char *x, ...) {
-        char **r;
-        va_list ap;
-
-        va_start(ap, x);
-        r = strv_new_ap(x, ap);
-        va_end(ap);
-
-        return r;
-}
-
-char **strv_merge(char **a, char **b) {
-        char **r, **k;
-
-        if (!a)
-                return strv_copy(b);
-
-        if (!b)
-                return strv_copy(a);
-
-        r = new(char*, strv_length(a) + strv_length(b) + 1);
-        if (!r)
-                return NULL;
-
-        for (k = r; *a; k++, a++) {
-                *k = strdup(*a);
-                if (!*k)
-                        goto fail;
-        }
-
-        for (; *b; k++, b++) {
-                *k = strdup(*b);
-                if (!*k)
-                        goto fail;
-        }
-
-        *k = NULL;
-        return r;
-
-fail:
-        strv_free(r);
-        return NULL;
-}
-
-char **strv_merge_concat(char **a, char **b, const char *suffix) {
-        char **r, **k;
-
-        /* Like strv_merge(), but appends suffix to all strings in b, before adding */
-
-        if (!b)
-                return strv_copy(a);
-
-        r = new(char*, strv_length(a) + strv_length(b) + 1);
-        if (!r)
-                return NULL;
-
-        k = r;
-        if (a)
-                for (; *a; k++, a++) {
-                        *k = strdup(*a);
-                        if (!*k)
-                                goto fail;
-                }
-
-        for (; *b; k++, b++) {
-                *k = strappend(*b, suffix);
-                if (!*k)
-                        goto fail;
-        }
-
-        *k = NULL;
-        return r;
-
-fail:
-        strv_free(r);
-        return NULL;
-
-}
-
-char **strv_split(const char *s, const char *separator) {
-        char *state;
-        char *w;
-        size_t l;
-        unsigned n, i;
-        char **r;
-
-        assert(s);
-
-        n = 0;
-        FOREACH_WORD_SEPARATOR(w, l, s, separator, state)
-                n++;
-
-        r = new(char*, n+1);
-        if (!r)
-                return NULL;
-
-        i = 0;
-        FOREACH_WORD_SEPARATOR(w, l, s, separator, state) {
-                r[i] = strndup(w, l);
-                if (!r[i]) {
-                        strv_free(r);
-                        return NULL;
-                }
-
-                i++;
-        }
-
-        r[i] = NULL;
-        return r;
-}
-
-char **strv_split_quoted(const char *s) {
-        char *state;
-        char *w;
-        size_t l;
-        unsigned n, i;
-        char **r;
-
-        assert(s);
-
-        n = 0;
-        FOREACH_WORD_QUOTED(w, l, s, state)
-                n++;
-
-        r = new(char*, n+1);
-        if (!r)
-                return NULL;
-
-        i = 0;
-        FOREACH_WORD_QUOTED(w, l, s, state) {
-                r[i] = cunescape_length(w, l);
-                if (!r[i]) {
-                        strv_free(r);
-                        return NULL;
-                }
-                i++;
-        }
-
-        r[i] = NULL;
-        return r;
-}
-
-char **strv_split_newlines(const char *s) {
-        char **l;
-        unsigned int n;
-
-        assert(s);
-
-        /* Special version of strv_split() that splits on newlines and
-         * suppresses an empty string at the end */
-
-        l = strv_split(s, NEWLINE);
-        if (!l)
-                return NULL;
-
-        n = strv_length(l);
-        if (n == 0)
-                return l;
-
-        if (isempty(l[n-1])) {
-                free(l[n-1]);
-                l[n-1] = NULL;
-        }
-
-        return l;
-}
-
-char *strv_join(char **l, const char *separator) {
-        char *r, *e;
-        char **s;
-        size_t n, k;
-
-        if (!separator)
-                separator = " ";
-
-        k = strlen(separator);
-
-        n = 0;
-        STRV_FOREACH(s, l) {
-                if (n != 0)
-                        n += k;
-                n += strlen(*s);
-        }
-
-        r = new(char, n+1);
-        if (!r)
-                return NULL;
-
-        e = r;
-        STRV_FOREACH(s, l) {
-                if (e != r)
-                        e = stpcpy(e, separator);
-
-                e = stpcpy(e, *s);
-        }
-
-        *e = 0;
-
-        return r;
-}
-
-char **strv_append(char **l, const char *s) {
-        char **r, **k;
-
-        if (!l)
-                return strv_new(s, NULL);
-
-        if (!s)
-                return strv_copy(l);
-
-        r = new(char*, strv_length(l)+2);
-        if (!r)
-                return NULL;
-
-        for (k = r; *l; k++, l++) {
-                *k = strdup(*l);
-                if (!*k)
-                        goto fail;
-        }
-
-        k[0] = strdup(s);
-        if (!k[0])
-                goto fail;
-
-        k[1] = NULL;
-        return r;
-
-fail:
-        strv_free(r);
-        return NULL;
-}
-
-int strv_push(char ***l, char *value) {
-        char **c;
-        unsigned n;
-
-        if (!value)
-                return 0;
-
-        n = strv_length(*l);
-        c = realloc(*l, sizeof(char*) * (n + 2));
-        if (!c)
-                return -ENOMEM;
-
-        c[n] = value;
-        c[n+1] = NULL;
-
-        *l = c;
-        return 0;
-}
-
-int strv_extend(char ***l, const char *value) {
-        char *v;
-        int r;
-
-        if (!value)
-                return 0;
-
-        v = strdup(value);
-        if (!v)
-                return -ENOMEM;
-
-        r = strv_push(l, v);
-        if (r < 0)
-                free(v);
-
-        return r;
-}
-
-char **strv_uniq(char **l) {
-        char **i;
-
-        /* Drops duplicate entries. The first identical string will be
-         * kept, the others dropped */
-
-        STRV_FOREACH(i, l)
-                strv_remove(i+1, *i);
-
-        return l;
-}
-
-char **strv_remove(char **l, const char *s) {
-        char **f, **t;
-
-        if (!l)
-                return NULL;
-
-        assert(s);
-
-        /* Drops every occurrence of s in the string list, edits
-         * in-place. */
-
-        for (f = t = l; *f; f++) {
-
-                if (streq(*f, s)) {
-                        free(*f);
-                        continue;
-                }
-
-                *(t++) = *f;
-        }
-
-        *t = NULL;
-        return l;
-}
-
-char **strv_remove_prefix(char **l, const char *s) {
-        char **f, **t;
-
-        if (!l)
-                return NULL;
-
-        assert(s);
-
-        /* Drops every occurrence of a string prefixed with s in the
-         * string list, edits in-place. */
-
-        for (f = t = l; *f; f++) {
-
-                if (startswith(*f, s)) {
-                        free(*f);
-                        continue;
-                }
-
-                *(t++) = *f;
-        }
-
-        *t = NULL;
-        return l;
-}
-
-char **strv_parse_nulstr(const char *s, size_t l) {
-        const char *p;
-        unsigned c = 0, i = 0;
-        char **v;
-
-        assert(s || l == 0);
-
-        if (l == 0)
-                return new0(char*, 1);
-
-        for (p = s; p < s + l; p++)
-                if (*p == 0)
-                        c++;
-
-        if (s[l-1] != 0)
-                c++;
-
-        v = new0(char*, c+1);
-        if (!v)
-                return NULL;
-
-        p = s;
-        while (p < s + l) {
-                const char *e;
-
-                e = memchr(p, 0, s + l - p);
-
-                v[i] = strndup(p, e ? e - p : s + l - p);
-                if (!v[i]) {
-                        strv_free(v);
-                        return NULL;
-                }
-
-                i++;
-
-                if (!e)
-                        break;
-
-                p = e + 1;
-        }
-
-        assert(i == c);
-
-        return v;
-}
-
-char **strv_split_nulstr(const char *s) {
-        const char *i;
-        char **r = NULL;
-
-        NULSTR_FOREACH(i, s)
-                if (strv_extend(&r, i) < 0) {
-                        strv_free(r);
-                        return NULL;
-                }
-
-        if (!r)
-                return strv_new(NULL, NULL);
-
-        return r;
-}
-
-bool strv_overlap(char **a, char **b) {
-        char **i, **j;
-
-        STRV_FOREACH(i, a) {
-                STRV_FOREACH(j, b) {
-                        if (streq(*i, *j))
-                                return true;
-                }
-        }
-
-        return false;
-}
-
-static int str_compare(const void *_a, const void *_b) {
-        const char **a = (const char**) _a, **b = (const char**) _b;
-
-        return strcmp(*a, *b);
-}
-
-char **strv_sort(char **l) {
-
-        if (strv_isempty(l))
-                return l;
-
-        qsort(l, strv_length(l), sizeof(char*), str_compare);
-        return l;
-}
-
-void strv_print(char **l) {
-        char **s;
-
-        if (!l)
-                return;
-
-        STRV_FOREACH(s, l)
-                puts(*s);
-}

install/strv.h

@@ -1,116 +0,0 @@
-#pragma once
-
-/***
-  This file is part of systemd.
-
-  Copyright 2010 Lennart Poettering
-
-  systemd is free software; you can redistribute it and/or modify it
-  under the terms of the GNU Lesser General Public License as published by
-  the Free Software Foundation; either version 2.1 of the License, or
-  (at your option) any later version.
-
-  systemd is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public License
-  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-***/
-
-#include <stdarg.h>
-#include <stdbool.h>
-
-#include "util.h"
-
-char *strv_find(char **l, const char *name) _pure_;
-char *strv_find_prefix(char **l, const char *name) _pure_;
-
-void strv_free(char **l);
-DEFINE_TRIVIAL_CLEANUP_FUNC(char**, strv_free);
-#define _cleanup_strv_free_ _cleanup_(strv_freep)
-
-char **strv_copy(char * const *l);
-unsigned int strv_length(char * const *l) _pure_;
-
-char **strv_merge(char **a, char **b);
-char **strv_merge_concat(char **a, char **b, const char *suffix);
-char **strv_append(char **l, const char *s);
-int strv_extend(char ***l, const char *value);
-int strv_push(char ***l, char *value);
-
-char **strv_remove(char **l, const char *s);
-char **strv_remove_prefix(char **l, const char *s);
-char **strv_uniq(char **l);
-
-#define strv_contains(l, s) (!!strv_find((l), (s)))
-
-char **strv_new(const char *x, ...) _sentinel_;
-char **strv_new_ap(const char *x, va_list ap);
-
-static inline const char* STRV_IFNOTNULL(const char *x) {
-        return x ? x : (const char *) -1;
-}
-
-static inline bool strv_isempty(char * const *l) {
-        return !l || !*l;
-}
-
-char **strv_split(const char *s, const char *separator);
-char **strv_split_quoted(const char *s);
-char **strv_split_newlines(const char *s);
-
-char *strv_join(char **l, const char *separator);
-
-char **strv_parse_nulstr(const char *s, size_t l);
-char **strv_split_nulstr(const char *s);
-
-bool strv_overlap(char **a, char **b) _pure_;
-
-#define STRV_FOREACH(s, l)                      \
-        for ((s) = (l); (s) && *(s); (s)++)
-
-#define STRV_FOREACH_BACKWARDS(s, l)            \
-        STRV_FOREACH(s, l)                      \
-                ;                               \
-        for ((s)--; (l) && ((s) >= (l)); (s)--)
-
-#define STRV_FOREACH_PAIR(x, y, l)               \
-        for ((x) = (l), (y) = (x+1); (x) && *(x) && *(y); (x) += 2, (y) = (x + 1))
-
-char **strv_sort(char **l);
-void strv_print(char **l);
-
-#define STRV_MAKE(...) ((char**) ((const char*[]) { __VA_ARGS__, NULL }))
-
-#define STRV_MAKE_EMPTY ((char*[1]) { NULL })
-
-#define strv_from_stdarg_alloca(first)                          \
-        ({                                                      \
-                char **_l;                                      \
-                                                                \
-                if (!first)                                     \
-                        _l = (char**) &first;                   \
-                else {                                          \
-                        unsigned _n;                            \
-                        va_list _ap;                            \
-                                                                \
-                        _n = 1;                                 \
-                        va_start(_ap, first);                   \
-                        while (va_arg(_ap, char*))              \
-                                _n++;                           \
-                        va_end(_ap);                            \
-                                                                \
-                        _l = newa(char*, _n+1);                 \
-                        _l[_n = 0] = (char*) first;             \
-                        va_start(_ap, first);                   \
-                        for (;;) {                              \
-                                _l[++_n] = va_arg(_ap, char*);  \
-                                if (!_l[_n])                    \
-                                        break;                  \
-                        }                                       \
-                        va_end(_ap);                            \
-                }                                               \
-                _l;                                             \
-        })

install/util.c

@@ -1,514 +0,0 @@
-/***
-  This file is part of systemd.
-
-  Copyright 2010 Lennart Poettering
-
-  systemd is free software; you can redistribute it and/or modify it
-  under the terms of the GNU Lesser General Public License as published by
-  the Free Software Foundation; either version 2.1 of the License, or
-  (at your option) any later version.
-
-  systemd is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public License
-  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-***/
-
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/syscall.h>
-
-#include "util.h"
-
-static inline pid_t gettid(void) {
-        return (pid_t) syscall(SYS_gettid);
-}
-
-size_t page_size(void) {
-        static __thread size_t pgsz = 0;
-        long r;
-
-        if (_likely_(pgsz > 0))
-                return pgsz;
-
-        assert_se((r = sysconf(_SC_PAGESIZE)) > 0);
-
-        pgsz = (size_t) r;
-
-        return pgsz;
-}
-
-bool endswith(const char *s, const char *postfix) {
-        size_t sl, pl;
-
-        assert(s);
-        assert(postfix);
-
-        sl = strlen(s);
-        pl = strlen(postfix);
-
-        if (pl == 0)
-                return true;
-
-        if (sl < pl)
-                return false;
-
-        return memcmp(s + sl - pl, postfix, pl) == 0;
-}
-int close_nointr(int fd) {
-        assert(fd >= 0);
-
-        for (;;) {
-                int r;
-
-                r = close(fd);
-                if (r >= 0)
-                        return r;
-
-                if (errno != EINTR)
-                        return -errno;
-        }
-}
-
-void close_nointr_nofail(int fd) {
-        int saved_errno = errno;
-
-        /* like close_nointr() but cannot fail, and guarantees errno
-         * is unchanged */
-
-        assert_se(close_nointr(fd) == 0);
-
-        errno = saved_errno;
-}
-
-int open_terminal(const char *name, int mode) {
-        int fd, r;
-        unsigned c = 0;
-
-        /*
-         * If a TTY is in the process of being closed opening it might
-         * cause EIO. This is horribly awful, but unlikely to be
-         * changed in the kernel. Hence we work around this problem by
-         * retrying a couple of times.
-         *
-         * https://bugs.launchpad.net/ubuntu/+source/linux/+bug/554172/comments/245
-         */
-
-        for (;;) {
-                if ((fd = open(name, mode)) >= 0)
-                        break;
-
-                if (errno != EIO)
-                        return -errno;
-
-                if (c >= 20)
-                        return -errno;
-
-                usleep(50 * USEC_PER_MSEC);
-                c++;
-        }
-
-        if (fd < 0)
-                return -errno;
-
-        if ((r = isatty(fd)) < 0) {
-                close_nointr_nofail(fd);
-                return -errno;
-        }
-
-        if (!r) {
-                close_nointr_nofail(fd);
-                return -ENOTTY;
-        }
-
-        return fd;
-}
-
-bool streq_ptr(const char *a, const char *b) {
-
-        /* Like streq(), but tries to make sense of NULL pointers */
-
-        if (a && b)
-                return streq(a, b);
-
-        if (!a && !b)
-                return true;
-
-        return false;
-}
-bool is_main_thread(void) {
-        static __thread int cached = 0;
-
-        if (_unlikely_(cached == 0))
-                cached = getpid() == gettid() ? 1 : -1;
-
-        return cached > 0;
-}
-
-int safe_atou(const char *s, unsigned *ret_u) {
-        char *x = NULL;
-        unsigned long l;
-
-        assert(s);
-        assert(ret_u);
-
-        errno = 0;
-        l = strtoul(s, &x, 0);
-
-        if (!x || *x || errno)
-                return errno ? -errno : -EINVAL;
-
-        if ((unsigned long) (unsigned) l != l)
-                return -ERANGE;
-
-        *ret_u = (unsigned) l;
-        return 0;
-}
-
-static const char *const log_level_table[] = {
-        [LOG_EMERG] = "emerg",
-        [LOG_ALERT] = "alert",
-        [LOG_CRIT] = "crit",
-        [LOG_ERR] = "err",
-        [LOG_WARNING] = "warning",
-        [LOG_NOTICE] = "notice",
-        [LOG_INFO] = "info",
-        [LOG_DEBUG] = "debug"
-};
-
-DEFINE_STRING_TABLE_LOOKUP(log_level, int);
-
-char *strnappend(const char *s, const char *suffix, size_t b) {
-        size_t a;
-        char *r;
-
-        if (!s && !suffix)
-                return strdup("");
-
-        if (!s)
-                return strndup(suffix, b);
-
-        if (!suffix)
-                return strdup(s);
-
-        assert(s);
-        assert(suffix);
-
-        a = strlen(s);
-        if (b > ((size_t) -1) - a)
-                return NULL;
-
-        r = new(char, a+b+1);
-        if (!r)
-                return NULL;
-
-        memcpy(r, s, a);
-        memcpy(r+a, suffix, b);
-        r[a+b] = 0;
-
-        return r;
-}
-
-char *strappend(const char *s, const char *suffix) {
-        return strnappend(s, suffix, suffix ? strlen(suffix) : 0);
-}
-
-char *strjoin(const char *x, ...) {
-        va_list ap;
-        size_t l;
-        char *r;
-
-        va_start(ap, x);
-
-        if (x) {
-                l = strlen(x);
-
-                for (;;) {
-                        const char *t;
-                        size_t n;
-
-                        t = va_arg(ap, const char *);
-                        if (!t)
-                                break;
-
-                        n = strlen(t);
-                        if (n > ((size_t) -1) - l) {
-                                va_end(ap);
-                                return NULL;
-                        }
-
-                        l += n;
-                }
-        } else
-                l = 0;
-
-        va_end(ap);
-
-        r = new(char, l+1);
-        if (!r)
-                return NULL;
-
-        if (x) {
-                char *p;
-
-                p = stpcpy(r, x);
-
-                va_start(ap, x);
-
-                for (;;) {
-                        const char *t;
-
-                        t = va_arg(ap, const char *);
-                        if (!t)
-                                break;
-
-                        p = stpcpy(p, t);
-                }
-
-                va_end(ap);
-        } else
-                r[0] = 0;
-
-        return r;
-}
-
-char *cunescape_length_with_prefix(const char *s, size_t length, const char *prefix) {
-        char *r, *t;
-        const char *f;
-        size_t pl;
-
-        assert(s);
-
-        /* Undoes C style string escaping, and optionally prefixes it. */
-
-        pl = prefix ? strlen(prefix) : 0;
-
-        r = new(char, pl+length+1);
-        if (!r)
-                return r;
-
-        if (prefix)
-                memcpy(r, prefix, pl);
-
-        for (f = s, t = r + pl; f < s + length; f++) {
-
-                if (*f != '\\') {
-                        *(t++) = *f;
-                        continue;
-                }
-
-                f++;
-
-                switch (*f) {
-
-                case 'a':
-                        *(t++) = '\a';
-                        break;
-                case 'b':
-                        *(t++) = '\b';
-                        break;
-                case 'f':
-                        *(t++) = '\f';
-                        break;
-                case 'n':
-                        *(t++) = '\n';
-                        break;
-                case 'r':
-                        *(t++) = '\r';
-                        break;
-                case 't':
-                        *(t++) = '\t';
-                        break;
-                case 'v':
-                        *(t++) = '\v';
-                        break;
-                case '\\':
-                        *(t++) = '\\';
-                        break;
-                case '"':
-                        *(t++) = '"';
-                        break;
-                case '\'':
-                        *(t++) = '\'';
-                        break;
-
-                case 's':
-                        /* This is an extension of the XDG syntax files */
-                        *(t++) = ' ';
-                        break;
-
-                case 'x': {
-                        /* hexadecimal encoding */
-                        int a, b;
-
-                        a = unhexchar(f[1]);
-                        b = unhexchar(f[2]);
-
-                        if (a < 0 || b < 0) {
-                                /* Invalid escape code, let's take it literal then */
-                                *(t++) = '\\';
-                                *(t++) = 'x';
-                        } else {
-                                *(t++) = (char) ((a << 4) | b);
-                                f += 2;
-                        }
-
-                        break;
-                }
-
-                case '0':
-                case '1':
-                case '2':
-                case '3':
-                case '4':
-                case '5':
-                case '6':
-                case '7': {
-                        /* octal encoding */
-                        int a, b, c;
-
-                        a = unoctchar(f[0]);
-                        b = unoctchar(f[1]);
-                        c = unoctchar(f[2]);
-
-                        if (a < 0 || b < 0 || c < 0) {
-                                /* Invalid escape code, let's take it literal then */
-                                *(t++) = '\\';
-                                *(t++) = f[0];
-                        } else {
-                                *(t++) = (char) ((a << 6) | (b << 3) | c);
-                                f += 2;
-                        }
-
-                        break;
-                }
-
-                case 0:
-                        /* premature end of string.*/
-                        *(t++) = '\\';
-                        goto finish;
-
-                default:
-                        /* Invalid escape code, let's take it literal then */
-                        *(t++) = '\\';
-                        *(t++) = *f;
-                        break;
-                }
-        }
-
-finish:
-        *t = 0;
-        return r;
-}
-
-char *cunescape_length(const char *s, size_t length) {
-        return cunescape_length_with_prefix(s, length, NULL);
-}
-
-
-/* Split a string into words, but consider strings enclosed in '' and
- * "" as words even if they include spaces. */
-char *split_quoted(const char *c, size_t *l, char **state) {
-        const char *current, *e;
-        bool escaped = false;
-
-        assert(c);
-        assert(l);
-        assert(state);
-
-        current = *state ? *state : c;
-
-        current += strspn(current, WHITESPACE);
-
-        if (*current == 0)
-                return NULL;
-
-        else if (*current == '\'') {
-                current ++;
-
-                for (e = current; *e; e++) {
-                        if (escaped)
-                                escaped = false;
-                        else if (*e == '\\')
-                                escaped = true;
-                        else if (*e == '\'')
-                                break;
-                }
-
-                *l = e-current;
-                *state = (char*) (*e == 0 ? e : e+1);
-
-        } else if (*current == '\"') {
-                current ++;
-
-                for (e = current; *e; e++) {
-                        if (escaped)
-                                escaped = false;
-                        else if (*e == '\\')
-                                escaped = true;
-                        else if (*e == '\"')
-                                break;
-                }
-
-                *l = e-current;
-                *state = (char*) (*e == 0 ? e : e+1);
-
-        } else {
-                for (e = current; *e; e++) {
-                        if (escaped)
-                                escaped = false;
-                        else if (*e == '\\')
-                                escaped = true;
-                        else if (strchr(WHITESPACE, *e))
-                                break;
-                }
-                *l = e-current;
-                *state = (char*) e;
-        }
-
-        return (char*) current;
-}
-
-/* Split a string into words. */
-char *split(const char *c, size_t *l, const char *separator, char **state) {
-        char *current;
-
-        current = *state ? *state : (char*) c;
-
-        if (!*current || *c == 0)
-                return NULL;
-
-        current += strspn(current, separator);
-        *l = strcspn(current, separator);
-        *state = current+*l;
-
-        return (char*) current;
-}
-
-int unhexchar(char c) {
-
-        if (c >= '0' && c <= '9')
-                return c - '0';
-
-        if (c >= 'a' && c <= 'f')
-                return c - 'a' + 10;
-
-        if (c >= 'A' && c <= 'F')
-                return c - 'A' + 10;
-
-        return -1;
-}
-
-int unoctchar(char c) {
-
-        if (c >= '0' && c <= '7')
-                return c - '0';
-
-        return -1;
-}

install/util.h

@@ -1,586 +0,0 @@
-#ifndef fooutilhfoo
-#define fooutilhfoo
-
-/***
-  This file is part of systemd.
-
-  Copyright 2010 Lennart Poettering
-
-  systemd is free software; you can redistribute it and/or modify it
-  under the terms of the GNU Lesser General Public License as published by
-  the Free Software Foundation; either version 2.1 of the License, or
-  (at your option) any later version.
-
-  systemd is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public License
-  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-***/
-
-#define _GNU_SOURCE
-
-#include <inttypes.h>
-#include <time.h>
-#include <sys/time.h>
-#include <stdarg.h>
-#include <stdbool.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <signal.h>
-#include <sched.h>
-#include <limits.h>
-#include <sys/stat.h>
-#include <dirent.h>
-#include <sys/resource.h>
-
-#include "macro.h"
-
-typedef uint64_t usec_t;
-typedef uint64_t nsec_t;
-
-typedef struct dual_timestamp {
-        usec_t realtime;
-        usec_t monotonic;
-} dual_timestamp;
-
-#define MSEC_PER_SEC  1000ULL
-#define USEC_PER_SEC  1000000ULL
-#define USEC_PER_MSEC 1000ULL
-#define NSEC_PER_SEC  1000000000ULL
-#define NSEC_PER_MSEC 1000000ULL
-#define NSEC_PER_USEC 1000ULL
-
-#define USEC_PER_MINUTE (60ULL*USEC_PER_SEC)
-#define NSEC_PER_MINUTE (60ULL*NSEC_PER_SEC)
-#define USEC_PER_HOUR (60ULL*USEC_PER_MINUTE)
-#define NSEC_PER_HOUR (60ULL*NSEC_PER_MINUTE)
-#define USEC_PER_DAY (24ULL*USEC_PER_HOUR)
-#define NSEC_PER_DAY (24ULL*NSEC_PER_HOUR)
-#define USEC_PER_WEEK (7ULL*USEC_PER_DAY)
-#define NSEC_PER_WEEK (7ULL*NSEC_PER_DAY)
-#define USEC_PER_MONTH (2629800ULL*USEC_PER_SEC)
-#define NSEC_PER_MONTH (2629800ULL*NSEC_PER_SEC)
-#define USEC_PER_YEAR (31557600ULL*USEC_PER_SEC)
-#define NSEC_PER_YEAR (31557600ULL*NSEC_PER_SEC)
-
-/* What is interpreted as whitespace? */
-#define WHITESPACE " \t\n\r"
-#define NEWLINE "\n\r"
-#define QUOTES "\"\'"
-#define COMMENTS "#;\n"
-
-#define FORMAT_TIMESTAMP_MAX 64
-#define FORMAT_TIMESTAMP_PRETTY_MAX 256
-#define FORMAT_TIMESPAN_MAX 64
-#define FORMAT_BYTES_MAX 8
-
-#define ANSI_HIGHLIGHT_ON "\x1B[1;39m"
-#define ANSI_HIGHLIGHT_RED_ON "\x1B[1;31m"
-#define ANSI_HIGHLIGHT_GREEN_ON "\x1B[1;32m"
-#define ANSI_HIGHLIGHT_YELLOW_ON "\x1B[1;33m"
-#define ANSI_HIGHLIGHT_OFF "\x1B[0m"
-
-usec_t now(clockid_t clock);
-
-dual_timestamp* dual_timestamp_get(dual_timestamp *ts);
-dual_timestamp* dual_timestamp_from_realtime(dual_timestamp *ts, usec_t u);
-
-#define dual_timestamp_is_set(ts) ((ts)->realtime > 0)
-
-usec_t timespec_load(const struct timespec *ts);
-struct timespec *timespec_store(struct timespec *ts, usec_t u);
-
-usec_t timeval_load(const struct timeval *tv);
-struct timeval *timeval_store(struct timeval *tv, usec_t u);
-
-size_t page_size(void);
-#define PAGE_ALIGN(l) ALIGN_TO((l), page_size())
-
-#define streq(a,b) (strcmp((a),(b)) == 0)
-#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0)
-
-bool streq_ptr(const char *a, const char *b);
-
-#define new(t, n) ((t*) malloc(sizeof(t)*(n)))
-
-#define new0(t, n) ((t*) calloc((n), sizeof(t)))
-
-#define newa(t, n) ((t*) alloca(sizeof(t)*(n)))
-
-#define newdup(t, p, n) ((t*) memdup(p, sizeof(t)*(n)))
-
-#define malloc0(n) (calloc((n), 1))
-
-static inline const char* yes_no(bool b) {
-        return b ? "yes" : "no";
-}
-
-static inline const char* strempty(const char *s) {
-        return s ? s : "";
-}
-
-static inline const char* strnull(const char *s) {
-        return s ? s : "(null)";
-}
-
-static inline const char *strna(const char *s) {
-        return s ? s : "n/a";
-}
-
-static inline bool isempty(const char *p) {
-        return !p || !p[0];
-}
-
-
-static inline const char *startswith(const char *s, const char *prefix) {
-        if (strncmp(s, prefix, strlen(prefix)) == 0)
-                return s + strlen(prefix);
-        return NULL;
-}
-
-bool endswith(const char *s, const char *postfix);
-
-
-bool startswith_no_case(const char *s, const char *prefix);
-
-bool first_word(const char *s, const char *word);
-
-int close_nointr(int fd);
-void close_nointr_nofail(int fd);
-void close_many(const int fds[], unsigned n_fd);
-
-int parse_boolean(const char *v);
-int parse_usec(const char *t, usec_t *usec);
-int parse_nsec(const char *t, nsec_t *nsec);
-int parse_bytes(const char *t, off_t *bytes);
-int parse_pid(const char *s, pid_t* ret_pid);
-int parse_uid(const char *s, uid_t* ret_uid);
-#define parse_gid(s, ret_uid) parse_uid(s, ret_uid)
-
-int safe_atou(const char *s, unsigned *ret_u);
-int safe_atoi(const char *s, int *ret_i);
-
-int safe_atollu(const char *s, unsigned long long *ret_u);
-int safe_atolli(const char *s, long long int *ret_i);
-
-#if LONG_MAX == INT_MAX
-static inline int safe_atolu(const char *s, unsigned long *ret_u) {
-        assert_cc(sizeof(unsigned long) == sizeof(unsigned));
-        return safe_atou(s, (unsigned*) ret_u);
-}
-static inline int safe_atoli(const char *s, long int *ret_u) {
-        assert_cc(sizeof(long int) == sizeof(int));
-        return safe_atoi(s, (int*) ret_u);
-}
-#else
-static inline int safe_atolu(const char *s, unsigned long *ret_u) {
-        assert_cc(sizeof(unsigned long) == sizeof(unsigned long long));
-        return safe_atollu(s, (unsigned long long*) ret_u);
-}
-static inline int safe_atoli(const char *s, long int *ret_u) {
-        assert_cc(sizeof(long int) == sizeof(long long int));
-        return safe_atolli(s, (long long int*) ret_u);
-}
-#endif
-
-static inline int safe_atou32(const char *s, uint32_t *ret_u) {
-        assert_cc(sizeof(uint32_t) == sizeof(unsigned));
-        return safe_atou(s, (unsigned*) ret_u);
-}
-
-static inline int safe_atoi32(const char *s, int32_t *ret_i) {
-        assert_cc(sizeof(int32_t) == sizeof(int));
-        return safe_atoi(s, (int*) ret_i);
-}
-
-static inline int safe_atou64(const char *s, uint64_t *ret_u) {
-        assert_cc(sizeof(uint64_t) == sizeof(unsigned long long));
-        return safe_atollu(s, (unsigned long long*) ret_u);
-}
-
-static inline int safe_atoi64(const char *s, int64_t *ret_i) {
-        assert_cc(sizeof(int64_t) == sizeof(long long int));
-        return safe_atolli(s, (long long int*) ret_i);
-}
-
-char *split(const char *c, size_t *l, const char *separator, char **state);
-char *split_quoted(const char *c, size_t *l, char **state);
-
-#define FOREACH_WORD(word, length, s, state)                            \
-        for ((state) = NULL, (word) = split((s), &(length), WHITESPACE, &(state)); (word); (word) = split((s), &(length), WHITESPACE, &(state)))
-
-#define FOREACH_WORD_SEPARATOR(word, length, s, separator, state)       \
-        for ((state) = NULL, (word) = split((s), &(length), (separator), &(state)); (word); (word) = split((s), &(length), (separator), &(state)))
-
-#define FOREACH_WORD_QUOTED(word, length, s, state)                     \
-        for ((state) = NULL, (word) = split_quoted((s), &(length), &(state)); (word); (word) = split_quoted((s), &(length), &(state)))
-
-pid_t get_parent_of_pid(pid_t pid, pid_t *ppid);
-int get_starttime_of_pid(pid_t pid, unsigned long long *st);
-
-int write_one_line_file(const char *fn, const char *line);
-int write_one_line_file_atomic(const char *fn, const char *line);
-int read_one_line_file(const char *fn, char **line);
-int read_full_file(const char *fn, char **contents, size_t *size);
-
-int parse_env_file(const char *fname, const char *separator, ...) _sentinel_;
-int load_env_file(const char *fname, char ***l);
-int write_env_file(const char *fname, char **l);
-
-char *strappend(const char *s, const char *suffix);
-char *strnappend(const char *s, const char *suffix, size_t length);
-
-char *replace_env(const char *format, char **env);
-char **replace_env_argv(char **argv, char **env);
-
-int readlink_malloc(const char *p, char **r);
-int readlink_and_make_absolute(const char *p, char **r);
-int readlink_and_canonicalize(const char *p, char **r);
-
-int reset_all_signal_handlers(void);
-
-char *strstrip(char *s);
-char *delete_chars(char *s, const char *bad);
-char *truncate_nl(char *s);
-
-char *file_in_same_dir(const char *path, const char *filename);
-
-int rmdir_parents(const char *path, const char *stop);
-
-int get_process_comm(pid_t pid, char **name);
-int get_process_cmdline(pid_t pid, size_t max_length, bool comm_fallback, char **line);
-int get_process_exe(pid_t pid, char **name);
-int get_process_uid(pid_t pid, uid_t *uid);
-
-char hexchar(int x);
-int unhexchar(char c);
-char octchar(int x);
-int unoctchar(char c);
-char decchar(int x);
-int undecchar(char c);
-
-char *cescape(const char *s);
-char *cunescape(const char *s);
-char *cunescape_length(const char *s, size_t length);
-
-char *xescape(const char *s, const char *bad);
-
-char *bus_path_escape(const char *s);
-char *bus_path_unescape(const char *s);
-
-char *ascii_strlower(char *path);
-
-bool dirent_is_file(const struct dirent *de);
-bool dirent_is_file_with_suffix(const struct dirent *de, const char *suffix);
-
-bool ignore_file(const char *filename);
-
-bool chars_intersect(const char *a, const char *b);
-
-char *format_timestamp(char *buf, size_t l, usec_t t);
-char *format_timestamp_pretty(char *buf, size_t l, usec_t t);
-char *format_timespan(char *buf, size_t l, usec_t t);
-
-int make_stdio(int fd);
-int make_null_stdio(void);
-
-unsigned long long random_ull(void);
-
-#define __DEFINE_STRING_TABLE_LOOKUP(name,type,scope)                   \
-        scope const char *name##_to_string(type i) {                    \
-                if (i < 0 || i >= (type) ELEMENTSOF(name##_table))      \
-                        return NULL;                                    \
-                return name##_table[i];                                 \
-        }                                                               \
-        scope type name##_from_string(const char *s) {                  \
-                type i;                                                 \
-                unsigned u = 0;                                         \
-                assert(s);                                              \
-                for (i = 0; i < (type)ELEMENTSOF(name##_table); i++)    \
-                        if (name##_table[i] &&                          \
-                            streq(name##_table[i], s))                  \
-                                return i;                               \
-                if (safe_atou(s, &u) >= 0 &&                            \
-                    u < ELEMENTSOF(name##_table))                       \
-                        return (type) u;                                \
-                return (type) -1;                                       \
-        }                                                               \
-        struct __useless_struct_to_allow_trailing_semicolon__
-
-#define DEFINE_STRING_TABLE_LOOKUP(name,type) __DEFINE_STRING_TABLE_LOOKUP(name,type,)
-#define DEFINE_PRIVATE_STRING_TABLE_LOOKUP(name,type) __DEFINE_STRING_TABLE_LOOKUP(name,type,static)
-
-int fd_nonblock(int fd, bool nonblock);
-int fd_cloexec(int fd, bool cloexec);
-
-int close_all_fds(const int except[], unsigned n_except);
-
-bool fstype_is_network(const char *fstype);
-
-int chvt(int vt);
-
-int read_one_char(FILE *f, char *ret, usec_t timeout, bool *need_nl);
-int ask(char *ret, const char *replies, const char *text, ...);
-
-int reset_terminal_fd(int fd, bool switch_to_text);
-int reset_terminal(const char *name);
-
-int open_terminal(const char *name, int mode);
-int acquire_terminal(const char *name, bool fail, bool force, bool ignore_tiocstty_eperm);
-int release_terminal(void);
-
-int flush_fd(int fd);
-
-int ignore_signals(int sig, ...);
-int default_signals(int sig, ...);
-int sigaction_many(const struct sigaction *sa, ...);
-
-int close_pipe(int p[]);
-int fopen_temporary(const char *path, FILE **_f, char **_temp_path);
-
-ssize_t loop_read(int fd, void *buf, size_t nbytes, bool do_poll);
-ssize_t loop_write(int fd, const void *buf, size_t nbytes, bool do_poll);
-
-bool is_device_path(const char *path);
-
-int dir_is_empty(const char *path);
-
-void rename_process(const char name[8]);
-
-void sigset_add_many(sigset_t *ss, ...);
-
-char* gethostname_malloc(void);
-bool hostname_is_set(void);
-char* getlogname_malloc(void);
-
-int getttyname_malloc(int fd, char **r);
-int getttyname_harder(int fd, char **r);
-
-int get_ctty_devnr(pid_t pid, dev_t *d);
-int get_ctty(pid_t, dev_t *_devnr, char **r);
-
-int chmod_and_chown(const char *path, mode_t mode, uid_t uid, gid_t gid);
-int fchmod_and_fchown(int fd, mode_t mode, uid_t uid, gid_t gid);
-
-int rm_rf_children(int fd, bool only_dirs, bool honour_sticky, struct stat *root_dev);
-int rm_rf(const char *path, bool only_dirs, bool delete_root, bool honour_sticky);
-
-int pipe_eof(int fd);
-
-cpu_set_t* cpu_set_malloc(unsigned *ncpus);
-
-void status_vprintf(const char *status, bool ellipse, const char *format, va_list ap);
-void status_printf(const char *status, bool ellipse, const char *format, ...);
-void status_welcome(void);
-
-int fd_columns(int fd);
-unsigned columns(void);
-
-int fd_lines(int fd);
-unsigned lines(void);
-
-int running_in_chroot(void);
-
-char *ellipsize(const char *s, size_t length, unsigned percent);
-char *ellipsize_mem(const char *s, size_t old_length, size_t new_length, unsigned percent);
-
-int touch(const char *path);
-
-char *unquote(const char *s, const char *quotes);
-char *normalize_env_assignment(const char *s);
-
-int wait_for_terminate(pid_t pid, siginfo_t *status);
-int wait_for_terminate_and_warn(const char *name, pid_t pid);
-
-_noreturn_ void freeze(void);
-
-bool null_or_empty(struct stat *st);
-int null_or_empty_path(const char *fn);
-
-DIR *xopendirat(int dirfd, const char *name, int flags);
-
-void dual_timestamp_serialize(FILE *f, const char *name, dual_timestamp *t);
-void dual_timestamp_deserialize(const char *value, dual_timestamp *t);
-
-char *fstab_node_to_udev_node(const char *p);
-
-bool tty_is_vc(const char *tty);
-bool tty_is_vc_resolve(const char *tty);
-bool tty_is_console(const char *tty);
-int vtnr_from_tty(const char *tty);
-const char *default_term_for_tty(const char *tty);
-
-void execute_directory(const char *directory, DIR *_d, char *argv[]);
-
-int kill_and_sigcont(pid_t pid, int sig);
-
-bool nulstr_contains(const char*nulstr, const char *needle);
-
-bool plymouth_running(void);
-
-void parse_syslog_priority(char **p, int *priority);
-void skip_syslog_pid(char **buf);
-void skip_syslog_date(char **buf);
-
-bool hostname_is_valid(const char *s);
-char* hostname_cleanup(char *s);
-
-char* strshorten(char *s, size_t l);
-
-int terminal_vhangup_fd(int fd);
-int terminal_vhangup(const char *name);
-
-int vt_disallocate(const char *name);
-
-int copy_file(const char *from, const char *to);
-int symlink_or_copy(const char *from, const char *to);
-int symlink_or_copy_atomic(const char *from, const char *to);
-
-int fchmod_umask(int fd, mode_t mode);
-
-bool display_is_local(const char *display);
-int socket_from_display(const char *display, char **path);
-
-int get_user_creds(const char **username, uid_t *uid, gid_t *gid, const char **home);
-int get_group_creds(const char **groupname, gid_t *gid);
-
-int in_group(const char *name);
-
-int glob_exists(const char *path);
-
-int dirent_ensure_type(DIR *d, struct dirent *de);
-
-int in_search_path(const char *path, char **search);
-int get_files_in_directory(const char *path, char ***list);
-
-char *join(const char *x, ...) _sentinel_;
-
-bool is_main_thread(void);
-
-bool in_charset(const char *s, const char* charset);
-
-int block_get_whole_disk(dev_t d, dev_t *ret);
-
-int file_is_priv_sticky(const char *p);
-
-int strdup_or_null(const char *a, char **b);
-
-#define NULSTR_FOREACH(i, l)                                    \
-        for ((i) = (l); (i) && *(i); (i) = strchr((i), 0)+1)
-
-#define NULSTR_FOREACH_PAIR(i, j, l)                             \
-        for ((i) = (l), (j) = strchr((i), 0)+1; (i) && *(i); (i) = strchr((j), 0)+1, (j) = *(i) ? strchr((i), 0)+1 : (i))
-
-const char *ioprio_class_to_string(int i);
-int ioprio_class_from_string(const char *s);
-
-const char *sigchld_code_to_string(int i);
-int sigchld_code_from_string(const char *s);
-
-const char *log_facility_unshifted_to_string(int i);
-int log_facility_unshifted_from_string(const char *s);
-
-const char *log_level_to_string(int i);
-int log_level_from_string(const char *s);
-
-const char *sched_policy_to_string(int i);
-int sched_policy_from_string(const char *s);
-
-const char *rlimit_to_string(int i);
-int rlimit_from_string(const char *s);
-
-const char *ip_tos_to_string(int i);
-int ip_tos_from_string(const char *s);
-
-const char *signal_to_string(int i);
-int signal_from_string(const char *s);
-
-int signal_from_string_try_harder(const char *s);
-
-extern int saved_argc;
-extern char **saved_argv;
-
-bool kexec_loaded(void);
-
-int prot_from_flags(int flags);
-
-char *format_bytes(char *buf, size_t l, off_t t);
-
-int fd_wait_for_event(int fd, int event, usec_t timeout);
-
-void* memdup(const void *p, size_t l);
-
-int is_kernel_thread(pid_t pid);
-
-static inline void freep(void *p) {
-        free(*(void**) p);
-}
-
-static inline void fclosep(FILE **f) {
-        if (*f)
-                fclose(*f);
-}
-
-static inline void pclosep(FILE **f) {
-        if (*f)
-                pclose(*f);
-}
-
-static inline void closep(int *fd) {
-        if (*fd >= 0)
-                close_nointr_nofail(*fd);
-}
-
-static inline void closedirp(DIR **d) {
-        if (*d)
-                closedir(*d);
-}
-
-static inline void umaskp(mode_t *u) {
-        umask(*u);
-}
-
-#define _cleanup_free_ _cleanup_(freep)
-#define _cleanup_fclose_ _cleanup_(fclosep)
-#define _cleanup_pclose_ _cleanup_(pclosep)
-#define _cleanup_close_ _cleanup_(closep)
-#define _cleanup_closedir_ _cleanup_(closedirp)
-#define _cleanup_umask_ _cleanup_(umaskp)
-#define _cleanup_globfree_ _cleanup_(globfree)
-
-int fd_inc_sndbuf(int fd, size_t n);
-int fd_inc_rcvbuf(int fd, size_t n);
-
-int fork_agent(pid_t *pid, const int except[], unsigned n_except, const char *path, ...);
-
-int setrlimit_closest(int resource, const struct rlimit *rlim);
-
-int getenv_for_pid(pid_t pid, const char *field, char **_value);
-
-int can_sleep(const char *type);
-
-bool is_valid_documentation_url(const char *url);
-
-bool in_initrd(void);
-
-void warn_melody(void);
-
-char *strjoin(const char *x, ...) _sentinel_;
-
-#define DEFINE_TRIVIAL_CLEANUP_FUNC(type, func)                 \
-        static inline void func##p(type *p) {                   \
-                if (*p)                                         \
-                        func(*p);                               \
-        }                                                       \
-        struct __useless_struct_to_allow_trailing_semicolon__
-
-char *split_quoted(const char *c, size_t *l, char **state);
-char *cunescape_length(const char *s, size_t length);
-int unhexchar(char c) _const_;
-int unoctchar(char c) _const_;
-
-#endif

logtee.c

@@ -1,54 +0,0 @@
-#define _GNU_SOURCE
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <errno.h>
-#include <limits.h>
-
-#define BUFLEN 4096
-
-int
-main(int argc, char *argv[])
-{
-	int fd;
-	int len, slen;
-
-	if (argc != 2) {
-		fprintf(stderr, "Usage: %s <file>\n", argv[0]);
-		exit(EXIT_FAILURE);
-	}
-
-	fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC, 0644);
-	if (fd == -1) {
-		perror("open");
-		exit(EXIT_FAILURE);
-	}
-
-	fprintf(stderr, "Logging to %s: ", argv[1]);
-
-	slen = 0;
-
-	do {
-		len = splice(STDIN_FILENO, NULL, fd, NULL,
-			     BUFLEN, SPLICE_F_MOVE);
-
-		if (len < 0) {
-			if (errno == EAGAIN)
-				continue;
-			perror("tee");
-			exit(EXIT_FAILURE);
-		} else
-			if (len == 0)
-				break;
-		slen += len;
-		if ((slen/BUFLEN) > 0) {
-			fprintf(stderr, ".");
-		}
-		slen = slen % BUFLEN;
-
-	} while (1);
-	close(fd);
-	fprintf(stderr, "\n");
-	exit(EXIT_SUCCESS);
-}

lsinitrd

@@ -0,0 +1,141 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Copyright 2005-2010 Harald Hoyer <harald@redhat.com>
+# Copyright 2005-2010 Red Hat, Inc.  All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+usage()
+{
+    {
+        echo "Usage: ${0##*/} [options] [<initramfs file> [<filename> [<filename> [...] ]]]"
+        echo "Usage: ${0##*/} [options] -k <kernel version>"
+        echo
+        echo "-h, --help                  print a help message and exit."
+        echo "-s, --size                  sort the contents of the initramfs by size."
+        echo "-f, --file <filename>       print the contents of <filename>."
+        echo "-k, --kver <kernel version> inspect the initramfs of <kernel version>."
+        echo
+    } >&2
+}
+
+sorted=0
+declare -A filenames
+
+unset POSIXLY_CORRECT
+TEMP=$(getopt \
+    -o "shf:k:" \
+    --long kver: \
+    --long file: \
+    --long help \
+    --long size \
+    -- "$@")
+
+if (( $? != 0 )); then
+    usage
+    exit 1
+fi
+
+eval set -- "$TEMP"
+
+while (($# > 0)); do
+    case $1 in
+        -k|--kver)  KERNEL_VERSION="$2"; shift;;
+        -f|--file)  filenames[${2#/}]=1; shift;;
+        -s|--size)  sorted=1;;
+        -h|--help)  usage; exit 0;;
+        --)         shift;break;;
+        *)          usage; exit 1;;
+    esac
+    shift
+done
+
+[[ $KERNEL_VERSION ]] || KERNEL_VERSION="$(uname -r)"
+
+if [[ $1 ]]; then
+    image="$1"
+    if ! [[ -f "$image" ]]; then
+        {
+            echo "$image does not exist"
+            echo
+        } >&2
+        usage
+        exit 1
+    fi
+else
+    image="/boot/initramfs-${KERNEL_VERSION}.img"
+fi
+
+shift
+while (($# > 0)); do
+    filenames[${1#/}]=1;
+    shift
+done
+
+if ! [[ -f "$image" ]]; then
+    {
+        echo "No <initramfs file> specified and the default image '$image' cannot be accessed!"
+        echo
+    } >&2
+    usage
+    exit 1
+fi
+
+read -N 6 bin < "$image"
+case $bin in
+    $'\x1f\x8b'*)
+        CAT="zcat";;
+    BZh*)
+        CAT="bzcat";;
+    070701)
+        CAT="cat";;
+    *)
+        CAT="xzcat";
+        if echo "test"|xz|xzcat --single-stream >/dev/null 2>&1; then
+            CAT="xzcat --single-stream"
+        fi
+        ;;
+esac
+
+ret=0
+
+if (( ${#filenames[@]} > 0 )); then
+    (( ${#filenames[@]} == 1 )) && nofileinfo=1
+    for f in ${!filenames[@]}; do
+        [[ $nofileinfo ]] || echo "initramfs:/$f"
+        [[ $nofileinfo ]] || echo "========================================================================"
+        $CAT -- $image | cpio --extract --verbose --quiet --to-stdout $f 2>/dev/null
+        ((ret+=$?))
+        [[ $nofileinfo ]] || echo "========================================================================"
+        [[ $nofileinfo ]] || echo
+    done
+else
+    echo "Image: $image: $(du -h $image | while read a b; do echo $a;done)"
+    echo "========================================================================"
+    $CAT -- "$image" | cpio --extract --verbose --quiet --to-stdout -- 'dracut-*' 2>/dev/null
+    ((ret+=$?))
+    echo "========================================================================"
+    if [ "$sorted" -eq 1 ]; then
+        $CAT -- "$image" | cpio --extract --verbose --quiet --list | sort -n -k5
+    else
+        $CAT -- "$image" | cpio --extract --verbose --quiet --list | sort -k9
+    fi
+    ((ret+=$?))
+    echo "========================================================================"
+fi
+
+exit $ret

lsinitrd-bash-completion.sh

@@ -1,60 +0,0 @@
-#
-# Copyright 2013 Red Hat, Inc.  All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-__contains_word () {
-        local word=$1; shift
-        for w in $*; do [[ $w = $word ]] && return 0; done
-        return 1
-}
-
-_lsinitrd() {
-        local field_vals= cur=${COMP_WORDS[COMP_CWORD]} prev=${COMP_WORDS[COMP_CWORD-1]}
-        local -A OPTS=(
-                [STANDALONE]='-s --size -h --help'
-
-                       [ARG]='-f --file -k --kver'
-        )
-
-        if __contains_word "$prev" ${OPTS[ARG]}; then
-                case $prev in
-                        --file|-f)
-                                comps=$(compgen -f -- "$cur")
-                                compopt -o filenames
-                        ;;
-                        --kver|-k)
-                                comps=$(cd /lib/modules; echo [0-9]*)
-                        ;;
-                        *)
-                                return 0
-                        ;;
-                esac
-                COMPREPLY=( $(compgen -W '$comps' -- "$cur") )
-                return 0
-        fi
-
-        if [[ $cur = -* ]]; then
-                COMPREPLY=( $(compgen -W '${OPTS[*]}' -- "$cur") )
-                return 0
-        fi
-
-        comps=$(compgen -f -- "$cur")
-        compopt -o filenames
-        COMPREPLY=( $(compgen -W '$comps' -- "$cur") )
-        return 0
-}
-
-complete -F _lsinitrd lsinitrd

lsinitrd.1

@@ -0,0 +1,73 @@
+'\" t
+.\"     Title: lsinitrd
+.\"    Author: [see the "AUTHORS" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
+.\"      Date: 07/17/2013
+.\"    Manual: dracut
+.\"    Source: dracut
+.\"  Language: English
+.\"
+.TH "LSINITRD" "1" "07/17/2013" "dracut" "dracut"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+lsinitrd \- tool to show the contents of an initramfs image
+.SH "SYNOPSIS"
+.sp
+\fBlsinitrd\fR [\fIOPTION\&...\fR] [<image> [<filename> [<filename> [\&...] ]]]
+.sp
+\fBlsinitrd\fR [\fIOPTION\&...\fR] \-k <kernel\-version>
+.SH "DESCRIPTION"
+.sp
+lsinitrd shows the contents of an initramfs image\&. if <image> is omitted, then lsinitrd uses the default image \fI/boot/<machine\-id>/<kernel\-version>/initrd\fR or \fI/boot/initramfs\-<kernel\-version>\&.img\fR\&.
+.SH "OPTIONS"
+.PP
+\fB\-h, \-\-help\fR
+.RS 4
+print a help message and exit\&.
+.RE
+.PP
+\fB\-s, \-\-size\fR
+.RS 4
+sort the contents of the initramfs by size\&.
+.RE
+.PP
+\fB\-f, \-\-file\fR\ \&\fI<filename>\fR
+.RS 4
+print the contents of <filename>\&.
+.RE
+.PP
+\fB\-k, \-\-kver\fR\ \&\fI<kernel version>\fR
+.RS 4
+inspect the initramfs of <kernel version>\&.
+.RE
+.SH "AVAILABILITY"
+.sp
+The lsinitrd command is part of the dracut package and is available from \m[blue]\fBhttps://dracut\&.wiki\&.kernel\&.org\fR\m[]
+.SH "AUTHORS"
+.sp
+Harald Hoyer
+.sp
+Amerigo Wang
+.sp
+Nikoli
+.SH "SEE ALSO"
+.sp
+\fBdracut\fR(8)

lsinitrd.1.asc

@@ -1,67 +0,0 @@
-LSINITRD(1)
-=========
-:doctype: manpage
-:man source:   dracut
-:man manual:   dracut
-
-NAME
-----
-lsinitrd - tool to show the contents of an initramfs image
-
-SYNOPSIS
---------
-*lsinitrd* ['OPTION...'] [<image> [<filename> [<filename> [...] ]]]
-
-*lsinitrd* ['OPTION...'] -k <kernel-version>
-
-DESCRIPTION
------------
-lsinitrd shows the contents of an initramfs image. if <image> is omitted, then
-lsinitrd uses the default image _/boot/<machine-id>/<kernel-version>/initrd_ or
-_/boot/initramfs-<kernel-version>.img_.
-
-OPTIONS
--------
-**-h, --help**::
-    print a help message and exit.
-
-**-s, --size**::
-    sort the contents of the initramfs by size.
-
-**-f, --file** _<filename>_::
-    print the contents of <filename>.
-
-**-k, --kver** _<kernel version>_::
-    inspect the initramfs of <kernel version>.
-
-**-m, --mod**::
-    list dracut modules included of the initramfs image.
-
-**--unpack**::
-    unpack the initramfs to the current directory, instead of displaying the contents.
-    If optional filenames are given, will only unpack specified files, else the whole image will be unpacked.
-    Won't unpack anything from early cpio part.
-
-**--unpackearly**::
-    unpack the early microcode initramfs to the current directory, instead of displaying the contents.
-    Same as --unpack, but only unpack files from early cpio part.
-
-**-v, --verbose**::
-    unpack verbosely
-
-AVAILABILITY
-------------
-The lsinitrd command is part of the dracut package and is available from
-link:$$https://dracut.wiki.kernel.org$$[https://dracut.wiki.kernel.org]
-
-AUTHORS
--------
-Harald Hoyer
-
-Amerigo Wang
-
-Nikoli
-
-SEE ALSO
---------
-*dracut*(8)

lsinitrd.sh

@@ -1,293 +0,0 @@
-#!/bin/bash
-#
-# Copyright 2005-2010 Harald Hoyer <harald@redhat.com>
-# Copyright 2005-2010 Red Hat, Inc.  All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-usage()
-{
-    {
-        echo "Usage: ${0##*/} [options] [<initramfs file> [<filename> [<filename> [...] ]]]"
-        echo "Usage: ${0##*/} [options] -k <kernel version>"
-        echo
-        echo "-h, --help                  print a help message and exit."
-        echo "-s, --size                  sort the contents of the initramfs by size."
-        echo "-m, --mod                   list modules."
-        echo "-f, --file <filename>       print the contents of <filename>."
-        echo "--unpack                    unpack the initramfs, instead of displaying the contents."
-        echo "                            If optional filenames are given, will only unpack specified files,"
-        echo "                            else the whole image will be unpacked. Won't unpack anything from early cpio part."
-        echo "--unpackearly               unpack the early microcode part of the initramfs."
-        echo "                            Same as --unpack, but only unpack files from early cpio part."
-        echo "-v, --verbose               unpack verbosely."
-        echo "-k, --kver <kernel version> inspect the initramfs of <kernel version>."
-        echo
-    } >&2
-}
-
-
-[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
-
-sorted=0
-modules=0
-unset verbose
-declare -A filenames
-
-unset POSIXLY_CORRECT
-TEMP=$(getopt \
-    -o "vshmf:k:" \
-    --long kver: \
-    --long file: \
-    --long mod \
-    --long help \
-    --long size \
-    --long unpack \
-    --long unpackearly \
-    --long verbose \
-    -- "$@")
-
-if (( $? != 0 )); then
-    usage
-    exit 1
-fi
-
-eval set -- "$TEMP"
-
-while (($# > 0)); do
-    case $1 in
-        -k|--kver)     KERNEL_VERSION="$2"; shift;;
-        -f|--file)     filenames[${2#/}]=1; shift;;
-        -s|--size)     sorted=1;;
-        -h|--help)     usage; exit 0;;
-        -m|--mod)      modules=1;;
-        -v|--verbose)  verbose="--verbose";;
-        --unpack)      unpack=1;;
-        --unpackearly) unpackearly=1;;
-        --)            shift;break;;
-        *)             usage; exit 1;;
-    esac
-    shift
-done
-
-[[ $KERNEL_VERSION ]] || KERNEL_VERSION="$(uname -r)"
-
-if [[ $1 ]]; then
-    image="$1"
-    if ! [[ -f "$image" ]]; then
-        {
-            echo "$image does not exist"
-            echo
-        } >&2
-        usage
-        exit 1
-    fi
-else
-    [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
-
-    if [[ -d /boot/loader/entries || -L /boot/loader/entries ]] \
-        && [[ $MACHINE_ID ]] \
-        && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
-        image="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
-    else
-        image="/boot/initramfs-${KERNEL_VERSION}.img"
-    fi
-fi
-
-shift
-while (($# > 0)); do
-    filenames[${1#/}]=1;
-    shift
-done
-
-if ! [[ -f "$image" ]]; then
-    {
-        echo "No <initramfs file> specified and the default image '$image' cannot be accessed!"
-        echo
-    } >&2
-    usage
-    exit 1
-fi
-
-dracutlibdirs() {
-    for d in lib64/dracut lib/dracut usr/lib64/dracut usr/lib/dracut; do
-        echo "$d/$1"
-    done
-}
-
-extract_files()
-{
-    (( ${#filenames[@]} == 1 )) && nofileinfo=1
-    for f in "${!filenames[@]}"; do
-        [[ $nofileinfo ]] || echo "initramfs:/$f"
-        [[ $nofileinfo ]] || echo "========================================================================"
-        $CAT "$image" 2>/dev/null | cpio --extract --verbose --quiet --to-stdout "$f" 2>/dev/null
-        ((ret+=$?))
-        [[ $nofileinfo ]] || echo "========================================================================"
-        [[ $nofileinfo ]] || echo
-    done
-}
-
-list_modules()
-{
-    echo "dracut modules:"
-    $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
-        $(dracutlibdirs modules.txt) 2>/dev/null
-    ((ret+=$?))
-}
-
-list_files()
-{
-    echo "========================================================================"
-    if [ "$sorted" -eq 1 ]; then
-        $CAT "$image" 2>/dev/null | cpio --extract --verbose --quiet --list | sort -n -k5
-    else
-        $CAT "$image" 2>/dev/null | cpio --extract --verbose --quiet --list | sort -k9
-    fi
-    ((ret+=$?))
-    echo "========================================================================"
-}
-
-unpack_files()
-{
-    if (( ${#filenames[@]} > 0 )); then
-        for f in "${!filenames[@]}"; do
-            $CAT "$image" 2>/dev/null | cpio -id --quiet $verbose $f
-            ((ret+=$?))
-        done
-    else
-        $CAT "$image" 2>/dev/null | cpio -id --quiet $verbose
-        ((ret+=$?))
-    fi
-}
-
-
-if (( ${#filenames[@]} <= 0 )) && [[ -z "$unpack" ]] && [[ -z "$unpackearly" ]]; then
-    echo "Image: $image: $(du -h $image | while read a b || [ -n "$a" ]; do echo $a;done)"
-    echo "========================================================================"
-fi
-
-read -N 6 bin < "$image"
-case $bin in
-    $'\x71\xc7'*|070701)
-        CAT="cat --"
-        is_early=$(cpio --extract --verbose --quiet --to-stdout -- 'early_cpio' < "$image" 2>/dev/null)
-        if [[ "$is_early" ]]; then
-            if [[ -n "$unpack" ]]; then
-                # should use --unpackearly for early CPIO
-                :
-            elif [[ -n "$unpackearly" ]]; then
-                unpack_files
-            elif (( ${#filenames[@]} > 0 )); then
-                extract_files
-            else
-                echo "Early CPIO image"
-                list_files
-            fi
-            if [[ -d "$dracutbasedir/skipcpio" ]]; then
-                SKIP="$dracutbasedir/skipcpio/skipcpio"
-            else
-                SKIP="$dracutbasedir/skipcpio"
-            fi
-            if ! [[ -x $SKIP ]]; then
-                echo
-                echo "'$SKIP' not found, cannot display remaining contents!" >&2
-                echo
-                exit 0
-            fi
-        fi
-        ;;
-esac
-
-if [[ $SKIP ]] ; then
-    bin="$($SKIP "$image" | { read -N 6 bin && echo "$bin" ; })"
-else
-    read -N 6 bin < "$image"
-fi
-case $bin in
-    $'\x1f\x8b'*)
-        CAT="zcat --"
-        ;;
-    BZh*)
-        CAT="bzcat --"
-        ;;
-    $'\x71\xc7'*|070701)
-        CAT="cat --"
-        ;;
-    $'\x02\x21'*)
-        CAT="lz4 -d -c"
-        ;;
-    $'\x89'LZO$'\0'*)
-        CAT="lzop -d -c"
-        ;;
-    $'\x28\xB5\x2F\xFD'*)
-        CAT="zstd -d -c"
-        ;;
-    *)
-        if echo "test"|xz|xzcat --single-stream >/dev/null 2>&1; then
-            CAT="xzcat --single-stream --"
-        else
-            CAT="xzcat --"
-        fi
-        ;;
-esac
-
-skipcpio()
-{
-    $SKIP "$@" | $ORIG_CAT
-}
-
-if [[ $SKIP ]]; then
-    ORIG_CAT="$CAT"
-    CAT=skipcpio
-fi
-
-if (( ${#filenames[@]} > 1 )); then
-    TMPFILE="$(mktemp -t --suffix=.cpio lsinitrd.XXXXXX)"
-    $CAT "$image" 2>/dev/null > $TMPFILE
-    trap "rm -f '$TMPFILE'" EXIT
-    pre_decompress()
-    {
-        cat $TMPFILE
-    }
-    CAT=pre_decompress
-fi
-
-ret=0
-
-if [[ -n "$unpack" ]]; then
-    unpack_files
-elif (( ${#filenames[@]} > 0 )); then
-    extract_files
-else
-    version=$($CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
-        $(dracutlibdirs 'dracut-*') 2>/dev/null)
-    ((ret+=$?))
-    echo "Version: $version"
-    echo
-    if [ "$modules" -eq 1 ]; then
-        list_modules
-        echo "========================================================================"
-    else
-        echo -n "Arguments: "
-        $CAT "$image" | cpio --extract --verbose --quiet --to-stdout -- \
-            $(dracutlibdirs build-parameter.txt) 2>/dev/null
-        echo
-        list_modules
-        list_files
-    fi
-fi
-
-exit $ret

mkinitrd-dracut.sh

@@ -1,140 +1,102 @@
 #!/bin/bash --norc
-kver=$(uname -r)
 
-boot_dir="/boot"
-quiet=0
-host_only=0
-force=0
-
-error() { echo "$@" >&2; }
+error() {
+    local NONL=""
+    if [ "$1" == "-n" ]; then
+        NONL="-n"
+        shift
+    fi
+    echo $NONL "$@" > /dev/stderr
+}
 
 usage () {
-    [[ $1 = '-n' ]] && cmd=echo || cmd=error
+    if [ "$1" == "-n" ]; then
+        cmd=echo
+    else
+        cmd=error
+    fi
 
-    $cmd "usage: ${0##*/} [--version] [--help] [-v] [-f] [--preload <module>]"
+    $cmd "usage: `basename $0` [--version] [--help] [-v] [-f] [--preload <module>]"
     $cmd "       [--image-version] [--with=<module>]"
-    $cmd "       [--nocompress]"
     $cmd "       <initrd-image> <kernel-version>"
     $cmd ""
-    $cmd "       (ex: ${0##*/} /boot/initramfs-$kver.img $kver)"
+    $cmd "       (ex: `basename $0` /boot/initramfs-$(uname -r).img $(uname -r))"
 
-    [[ $1 = '-n' ]] && exit 0
-    exit 1
-}
-
-# Little helper function for reading args from the commandline.
-# it automatically handles -a b and -a=b variants, and returns 1 if
-# we need to shift $3.
-read_arg() {
-    # $1 = arg name
-    # $2 = arg value
-    # $3 = arg parameter
-    param="$1"
-    local rematch='^[^=]*=(.*)$' result
-    if [[ $2 =~ $rematch ]]; then
-        read "$param" <<< "${BASH_REMATCH[1]}"
+    if [ "$1" == "-n" ]; then
+        exit 0
     else
-	for ((i=3; $i <= $#; i++)); do
-            # Only read next arg if it not an arg itself.
-            if [[ ${@:$i:1} = -* ]];then
-		break
+        exit 1
+    fi
+}
+
+
+while [ $# -gt 0 ]; do
+    case $1 in
+        --with-usb*)
+            if [ "$1" != "${1##--with-usb=}" ]; then
+                usbmodule=${1##--with-usb=}
+            else
+                usbmodule="usb-storage"
             fi
-            result="$result ${@:$i:1}"
-            # There is no way to shift our callers args, so
-            # return "no of args" to indicate they should do it instead.
-	done
-	read "$1" <<< "$result"
-        return $(($i - 3))
-    fi
-}
-
-# Taken over from SUSE mkinitrd
-default_kernel_images() {
-    local regex kernel_image kernel_version version_version initrd_image
-    local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
-
-    case "$(uname -m)" in
-        s390|s390x)
-            regex='image'
+            basicmodules="$basicmodules $usbmodule"
+            unset usbmodule
             ;;
-        ppc|ppc64)
-            regex='vmlinux'
-            ;;
-        i386|x86_64)
-            regex='vmlinuz'
-            ;;
-        arm*)
-            regex='[uz]Image'
-            ;;
-        aarch64)
-            regex='Image'
-            ;;
-        *)  regex='vmlinu.'
-            ;;
-    esac
+        --with-avail*)
+            if [ "$1" != "${1##--with-avail=}" ]; then
+                modname=${1##--with-avail=}
+            else
+                modname=$2
+                shift
+            fi
 
-    # user mode linux
-    if grep -q UML /proc/cpuinfo; then
-            regex='linux'
-    fi
+            basicmodules="$basicmodules $modname"
+            ;;
+        --with*)
+            if [ "$1" != "${1##--with=}" ]; then
+                modname=${1##--with=}
+            else
+                modname=$2
+                shift
+            fi
 
-    kernel_images=""
-    initrd_images=""
-    for kernel_image in $(ls $boot_dir \
-            | sed -ne "\|^$regex\(-[0-9.]\+-[0-9]\+-[a-z0-9]\+$\)\?|p" \
-            | grep -v kdump$ ) ; do
-
-        # Note that we cannot check the RPM database here -- this
-        # script is itself called from within the binary kernel
-        # packages, and rpm does not allow recursive calls.
-
-        [ -L "$boot_dir/$kernel_image" ] && continue
-        [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
-        kernel_version=$(/usr/bin/get_kernel_version \
-                         $boot_dir/$kernel_image 2> /dev/null)
-        initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
-        if [ "$kernel_image" != "$initrd_image" -a \
-             -n "$kernel_version" -a \
-             -d "/lib/modules/$kernel_version" ]; then
-                kernel_images="$kernel_images $boot_dir/$kernel_image"
-                initrd_images="$initrd_images $boot_dir/$initrd_image"
-        fi
-    done
-    for kernel_image in $kernel_images;do
-	kernels="$kernels ${kernel_image#*-}"
-    done
-    for initrd_image in $initrd_images;do
-	targets="$targets $initrd_image"
-    done
-    host_only=1
-    force=1
-}
-
-while (($# > 0)); do
-    case ${1%%=*} in
-        --with-usb) read_arg usbmodule "$@" || shift $?
-            basicmodules="$basicmodules ${usbmodule:-usb-storage}"
-            unset usbmodule;;
-        --with-avail) read_arg modname "$@" || shift $?
-            basicmodules="$basicmodules $modname";;
-        --with) read_arg modname "$@" || shift $?
-            basicmodules="$basicmodules $modname";;
+            basicmodules="$basicmodules $modname"
+            ;;
         --version)
             echo "mkinitrd: dracut compatibility wrapper"
-            exit 0;;
-        -v|--verbose) dracut_args="${dracut_args} -v";;
-        -f|--force) force=1;;
-        --preload) read_arg modname "$@" || shift $?
-            basicmodules="$basicmodules $modname";;
-        --image-version) img_vers=yes;;
-        --rootfs|-d) read_arg rootfs "$@" || shift $?
-            dracut_args="${dracut_args} --filesystems $rootfs";;
-        --nocompress) dracut_args="$dracut_args --no-compress";;
-        --help) usage -n;;
-        --builtin) ;;
+            exit 0
+            ;;
+        -v|--verbose)
+            dracut_args="${dracut_args} -v"
+            ;;
+        -f|--force)
+            dracut_args="${dracut_args} -f"
+            ;;
+        --preload*)
+            if [ "$1" != "${1##--preload=}" ]; then
+                modname=${1##--preload=}
+            else
+                modname=$2
+                shift
+            fi
+            basicmodules="$basicmodules $modname"
+            ;;
+        --image-version)
+            img_vers=yes
+            ;;
+	--rootfs*)
+            if [ "$1" != "${1##--rootfs=}" ]; then
+                rootfs="${1##--rootfs=}"
+            else
+                rootfs="$2"
+                shift
+            fi
+	    dracut_args="${dracut_args} --filesystems $rootfs"
+	    ;;
+        --builtin*) ;;
         --without*) ;;
         --without-usb) ;;
         --fstab*) ;;
+        --nocompress) ;;
         --ifneeded) ;;
         --omit-scsi-modules) ;;
         --omit-ide-modules) ;;
@@ -144,83 +106,45 @@ while (($# > 0)); do
         --allow-missing) ;;
         --net-dev*) ;;
         --noresume) ;;
-        --rootdev*) ;;
-        --thawdev*) ;;
-        --rootopts*) ;;
-        --root*) ;;
-        --loopdev*) ;;
-        --loopfs*) ;;
-        --loopopts*) ;;
-        --looppath*) ;;
-        --dsdt*) ;;
+	--rootdev*) ;;
+	--thawdev*) ;;
+	--rootopts*) ;;
+	--root*) ;;
+	--loopdev*) ;;
+	--loopfs*) ;;
+	--loopopts*) ;;
+	--looppath*) ;;
+	--dsdt*) ;;
         --bootchart) ;;
-	-s) ;;
-	--quiet|-q) quiet=1;;
-	-b) read_arg boot_dir "$@" || shift $?
-	    if [ ! -d $boot_dir ];then
-		error "Boot directory $boot_dir does not exist"
-		exit 1
-	    fi
-	    ;;
-	-k) # Would be nice to get a list of images here
-	    read_arg kernel_images "$@" || shift $?
-	    for kernel_image in $kernel_images;do
-		kernels="$kernels ${kernel_image#*-}"
-	    done
-	    host_only=1
-	    force=1
-	    ;;
-	-i) read_arg initrd_images "$@" || shift $?
-	    for initrd_image in $initrd_images;do
-		targets="$targets $boot_dir/$initrd_image"
-	    done
-	    ;;
-        *)  if [[ ! $targets ]]; then
-            targets=$1
-            elif [[ ! $kernels ]]; then
-            kernels=$1
+        --help)
+            usage -n
+            ;;
+        *)
+            if [ -z "$target" ]; then
+                target=$1
+            elif [ -z "$kernel" ]; then
+                kernel=$1
             else
-            usage
-            fi;;
+                usage
+            fi
+            ;;
     esac
+
     shift
 done
 
-[[ $targets && $kernels ]] || default_kernel_images
-[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage)
+if [ -z "$target" -o -z "$kernel" ]; then
+    usage
+fi
 
-# We can have several targets/kernels, transform the list to an array
-targets=( $targets )
-[[ $kernels ]] && kernels=( $kernels )
+if [ -n "$img_vers" ]; then
+    target="$target-$kernel"
+fi
 
-[[ $host_only == 1 ]] && dracut_args="${dracut_args} -H"
-[[ $force == 1 ]]     && dracut_args="${dracut_args} -f"
+if [ -n "$basicmodules" ]; then
+	dracut $dracut_args --add-drivers "$basicmodules" "$target" "$kernel"
+else
+	dracut $dracut_args "$target" "$kernel"
+fi
 
-echo "Creating: target|kernel|dracut args|basicmodules "
-for ((i=0 ; $i<${#targets[@]} ; i++)); do
-
-    if [[ $img_vers ]];then
-	target="${targets[$i]}-${kernels[$i]}"
-    else
-	target="${targets[$i]}"
-    fi
-    kernel="${kernels[$i]}"
-
-    # Duplicate code: No way found how to redirect output based on $quiet
-    if [[ $quiet == 1 ]];then
-	echo "$target|$kernel|$dracut_args|$basicmodules"
-	if [[ $basicmodules ]]; then
-            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
-		"$kernel" &>/dev/null
-	else
-            dracut $dracut_args "$target" "$kernel" &>/dev/null
-	fi
-    else
-	if [[ $basicmodules ]]; then
-            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
-		"$kernel"
-	else
-            dracut $dracut_args "$target" "$kernel"
-	fi
-    fi
-done
+# vim:ts=8:sw=4:sts=4:et

mkinitrd-suse.8.asc

@@ -1,106 +0,0 @@
-MKINITRD(8)
-===========
-:doctype: manpage
-:man source:   dracut
-:man manual:   dracut
-
-NAME
-----
-mkinitrd-suse - is a compat wrapper, which calls dracut to generate an initramfs
-
-SYNOPSIS
---------
-*mkinitrd* ['OPTION...']
-
-DESCRIPTION
------------
-*mkinitrd* creates an initramfs image <initrd-image> for the kernel with
-version <kernel-version> by calling *dracut*.
-
-[IMPORTANT]
-This version of mkinitrd is provided for compatibility with older
-versions of mkinitrd. If a more fine grained control over the
-resulting image is needed, *dracut* should be called directly.
-
-OPTIONS
--------
-**-R, --version**::
-    print info about the version
-
-**-k** _<kernel_list>_::
-    List of kernel images for which initrd files are created (relative
-    to _boot_dir_), Image name should begin with the following string,
-    defaults to _vmlinux_ on ppc/ppc64, _image_ on s390/s390x and _vmlinuz_
-    for everything else.
-
-**-i** _<initrd_list>_::
-    List of file names (relative to _boot_dir_) for the initrd; positions
-    have to match the _kernel_list_. Defaults to _initrd_.
-
-**-m** _<module_list>_::
-    Modules to include in initrd, defaults to _INITRD_MODULES_ variable
-    in */etc/sysconfig/kernel*.
-
-**-f** _<feature_list>_::
-    Features to be enabled for the initrd. In general mkinitrd
-    configures the initrd for the root device it is started from. With
-    this option additional feature can be enabled.
-
-**-b** _<bootdir>_::
-    Boot directory, defaults to */boot*, where the initrd is created.
-
-**-d** _<root_device>_::
-    Root device, defaults to the device from which the root_dir is
-    mounted; overwrites the rootdev environment variable if set
-
-**-s** _<size>_::
-    Add splash animation and bootscreen to initrd.
-
-**-D** _<interface>::
-    Run dhcp on the specified interface (for example "eth0").
-
-**-I** _<interface>::
-    Configure the specified interface statically.
-
-**-a** _<acpi_dsdt>::
-    Attach compiled ACPI DSDT (Differentiated System Description Table)
-    to initrd. This replaces the DSDT of the BIOS. Defaults to the
-    _ACPI_DSDT_ variable in */etc/sysconfig/kernel*.
-
-**-M** _<map>::
-    System.map file to use.
-
-**-B**::
-    Don’t run the *update-bootloader(8)* script after the initrd(s) have
-    been created. This is useful if you call mkinitrd(8) for anything
-    else than the running system.
-
-**-A**::
-    Create a so called "monster initrd" which includes all available
-    features and modules. This calls dracut with --no-hostonly and
-    --no-hostonly-cmdline parameters internally, instead of the default
-    --hostonly and --hostonly-cmdline.
-
-**-v, --verbose**::
-    increase verbosity level
-
-**-L**::
-    Disable logging to _/var/log/YaST2/mkinitrd.log_. This is useful for
-    testing if you don’t want to clutter the system log.
-
-**--help**::
-    print a help message and exit.
-
-AVAILABILITY
-------------
-The mkinitrd command is part of the dracut package and is available from
-link:$$https://dracut.wiki.kernel.org$$[https://dracut.wiki.kernel.org]
-
-AUTHORS
--------
-Harald Hoyer, Hannes Reinecke
-
-SEE ALSO
---------
-*dracut*(8)
-*update-bootloader*(8)

mkinitrd-suse.sh

@@ -1,393 +0,0 @@
-#!/bin/bash --norc
-#
-# mkinitrd compability wrapper for SUSE.
-#
-# Copyright (c) 2013 SUSE Linux Products GmbH. All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-boot_dir="/boot"
-quiet=0
-logfile=/var/log/YaST2/mkinitrd.log
-dracut_cmd=dracut
-
-error() { echo "$@" >&2; }
-
-usage () {
-    [[ $1 = '-n' ]] && cmd=echo || cmd=error
-
-    $cmd "usage: ${0##*/} [options]"
-    $cmd ""
-    $cmd "	Create initial ramdisk images that contain all kernel modules needed"
-    $cmd "	in the early boot process, before the root file system becomes"
-    $cmd "	available."
-    $cmd "	This usually includes SCSI and/or RAID modules, a file system module"
-    $cmd "	for the root file system, or a network interface driver module for dhcp."
-    $cmd ""
-    $cmd "	options:"
-    $cmd "	-f \"feature list\"	Features to be enabled when generating initrd."
-    $cmd "				Available features are:"
-    $cmd "					iscsi, md, multipath, lvm, lvm2,"
-    $cmd "					ifup, fcoe, dcbd"
-    $cmd "	-k \"kernel list\"	List of kernel images for which initrd files are"
-    $cmd "				created. Defaults to all kernels found in /boot."
-    $cmd "	-i \"initrd list\"	List of file names for the initrd; position have"
-    $cmd "				match to \"kernel list\". Defaults to all kernels"
-    $cmd "				found in /boot."
-    $cmd "	-b boot_dir		Boot directory. Defaults to /boot."
-    $cmd "	-t tmp_dir		Temporary directory. Defaults to /var/tmp."
-    $cmd "	-M map			System.map file to use."
-    $cmd "	-A			Create a so called \"monster initrd\" which"
-    $cmd "				includes all features and modules possible."
-    $cmd "	-B			Do not update bootloader configuration."
-    $cmd "	-v			Verbose mode."
-    $cmd "	-L			Disable logging."
-    $cmd "	-h			This help screen."
-    $cmd "	-m \"module list\"	Modules to include in initrd. Defaults to the"
-    $cmd "				INITRD_MODULES variable in /etc/sysconfig/kernel"
-    $cmd "	-u \"DomU module list\"	Modules to include in initrd. Defaults to the"
-    $cmd "				DOMU_INITRD_MODULES variable in"
-    $cmd "				/etc/sysconfig/kernel."
-    $cmd "	-d root_device		Root device. Defaults to the device from"
-    $cmd "				which / is mounted. Overrides the rootdev"
-    $cmd "				enviroment variable if set."
-    $cmd "	-j device		Journal device"
-    $cmd "	-D interface		Run dhcp on the specified interface."
-    $cmd "	-I interface		Configure the specified interface statically."
-    $cmd "	-a acpi_dsdt		Obsolete, do not use."
-    $cmd "	-s size			Add splash animation and bootscreen to initrd."
-
-    [[ $1 = '-n' ]] && exit 0
-    exit 1
-}
-
-# Little helper function for reading args from the commandline.
-# it automatically handles -a b and -a=b variants, and returns 1 if
-# we need to shift $3.
-read_arg() {
-    # $1 = arg name
-    # $2 = arg value
-    # $3 = arg parameter
-    param="$1"
-    local rematch='^[^=]*=(.*)$' result
-    if [[ $2 =~ $rematch ]]; then
-        read "$param" <<< "${BASH_REMATCH[1]}"
-    else
-	for ((i=3; $i <= $#; i++)); do
-            # Only read next arg if it not an arg itself.
-            if [[ ${@:$i:1} = -* ]];then
-		break
-            fi
-            result="$result ${@:$i:1}"
-            # There is no way to shift our callers args, so
-            # return "no of args" to indicate they should do it instead.
-	done
-	read "$1" <<< "$result"
-        return $(($i - 3))
-    fi
-}
-
-# Helper functions to calculate ipconfig command line
-calc_netmask() {
-    local prefix=$1
-
-    [ -z "$prefix" ] && return
-    mask=$(( 0xffffffff << (32 - $prefix) ))
-    byte1=$(( mask >> 24 ))
-    byte2=$(( mask >> 16 ))
-    byte3=$(( mask >> 8 ))
-    byte4=$(( mask & 0xff ))
-    netmask=$(printf "%d.%d.%d.%d" $(( byte1 & 0xff )) $(( byte2 & 0xff )) $(( byte3 & 0xff )) $byte4);
-
-    echo $netmask
-}
-
-ipconfig() {
-    local interface=$1
-    local iplink macaddr broadcast gateway ipaddr prefix netmask
-
-    iplink=$(ip addr show dev $interface | sed -n 's/ *inet \(.*\) brd.*/\1/p')
-    macaddr=$(ip addr show dev $interface | sed -n 's/.*ether \(.*\) brd.*/\1/p')
-    broadcast=$(ip addr show dev $interface | sed -n 's/.*brd \(.*\) scope.*/\1/p')
-    gateway=$(ip route show dev $interface | sed -n 's/default via \([0-9\.]*\).*/\1/p')
-
-    ipaddr=${iplink%%/*}
-    prefix=${iplink##*/}
-    netmask=$(calc_netmask $prefix)
-
-    echo "${ipaddr}:${serveraddr}:${gateway}:${netmask}:${hostname}:${interface}:none::${macaddr}"
-}
-
-is_xen_kernel() {
-    local kversion=$1
-    local root_dir=$2
-    local cfg
-
-    for cfg in ${root_dir}/boot/config-$kversion $root_dir/lib/modules/$kversion/build/.config
-    do
-        test -r $cfg || continue
-        grep -q "^CONFIG_XEN=y\$" $cfg
-        return
-    done
-    test $kversion != "${kversion%-xen*}"
-    return
-}
-
-# kernel_image_gz_from_image() and kernel_version_from_image() are helpers
-# for arm* kernels which produce zImage files which cannot be read from
-# get_kernel_version -> get rid of this workaround if possible
-kernel_image_gz_from_image() {
-    local arch=$(uname -i)
-    local r=${1}.gz
-
-    # uImage kernels can't be extracted directly. Use the vmlinux.gz instead
-    r=${r//uImage/vmlinux}
-
-    # on ARM a zImage can't be extracted directly. Other platforms define it
-    # as a gzipped vmlinux file, but not ARM. So only on ARM, use vmlinux.gz.
-    if [[ $arch =~ arm ]] || [[ $arch =~ aarch ]]; then
-        r=${r//zImage/vmlinux}
-    fi
-
-    echo $r
-}
-
-kernel_version_from_image() {
-    local kernel_image="$1" kernel_image_gz=$(kernel_image_gz_from_image "$1")
-
-    if get_kernel_version "$kernel_image" 2>/dev/null; then
-        return
-    fi
-    get_kernel_version "$kernel_image_gz" 2>/dev/null
-}
-
-# Taken over from SUSE mkinitrd
-default_kernel_images() {
-    local regex kernel_image kernel_version version_version initrd_image
-    local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
-
-    case "$(uname -m)" in
-        s390|s390x)
-            regex='image'
-            ;;
-        ppc|ppc64)
-            regex='vmlinux'
-            ;;
-        i386|x86_64)
-            regex='vmlinuz'
-            ;;
-        arm*)
-            regex='[uz]Image'
-            ;;
-        aarch64)
-            regex='Image'
-            ;;
-        *)  regex='vmlinu.'
-            ;;
-    esac
-
-    kernel_images=""
-    initrd_images=""
-    for kernel_image in $(ls $boot_dir \
-            | sed -ne "\|^$regex\(-[0-9.]\+-[0-9]\+-[a-z0-9]\+$\)\?|p" \
-            | grep -v kdump$ ) ; do
-
-        # Note that we cannot check the RPM database here -- this
-        # script is itself called from within the binary kernel
-        # packages, and rpm does not allow recursive calls.
-
-        [ -L "$boot_dir/$kernel_image" ] && continue
-        [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
-
-        kernel_version=$(kernel_version_from_image \
-                         $boot_dir/$kernel_image 2> /dev/null)
-        initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
-        if [ "$kernel_image" != "$initrd_image" -a \
-             -n "$kernel_version" -a \
-             -d "/lib/modules/$kernel_version" ]; then
-                kernel_images="$kernel_images $boot_dir/$kernel_image"
-                initrd_images="$initrd_images $boot_dir/$initrd_image"
-        fi
-    done
-    for kernel_image in $kernel_images;do
-	kernels="$kernels ${kernel_image#*-}"
-    done
-    for initrd_image in $initrd_images;do
-	targets="$targets $initrd_image"
-    done
-}
-
-while (($# > 0)); do
-    case ${1%%=*} in
-	-f) read_arg feature_list "$@" || shift $?
-	    # Could be several features
-	    ;;
-	-k) # Would be nice to get a list of images here
-	    read_arg kernel_images "$@" || shift $?
-	    for kernel_image in $kernel_images;do
-		[ -L "/boot/$kernel_image" ] && kernel_image="$(readlink "/boot/$kernel_image")"
-		kernels="$kernels ${kernel_image#*-}"
-	    done
-	    ;;
-	-i) read_arg initrd_images "$@" || shift $?
-	    for initrd_image in $initrd_images;do
-		[ -L "/boot/$initrd_image" ] && initrd_image="$(readlink "/boot/$initrd_image")"
-		# Check if the initrd_image contains a path.
-		# if not, then add the default boot_dir
-		dname=`dirname $initrd_image`
-		if [ "$dname" == "." ]; then
-                    targets="$targets $boot_dir/$initrd_image";
-		else
-                    targets="$targets $initrd_image";
-		fi
-	    done
-	    ;;
-	-b) read_arg boot_dir "$@" || shift $?
-	    if [ ! -d $boot_dir ];then
-		error "Boot directory $boot_dir does not exist"
-		exit 1
-	    fi
-	    ;;
-	-t) read_arg tmp_dir "$@" || shift $?
-	    dracut_args="${dracut_args} --tmpdir $tmp_dir"
-	    ;;
-	-M) read_arg map_file "$@" || shift $?
-	    ;;
-	-A) dracut_args="${dracut_args} --no-host-only";;
-	-B) skip_update_bootloader=1;;
-        -v|--verbose) dracut_args="${dracut_args} -v";;
-	-L) logfile=;;
-        -h|--help) usage -n;;
-	-m) read_arg module_list "$@" || shift $? ;;
-	-u) read_arg domu_module_list "$@" || shift $?
-	    echo "mkinitrd: DomU modules not yet supported" ;;
-        -d) read_arg rootfs "$@" || shift $?
-            dracut_args="${dracut_args} --filesystems $rootfs" ;;
-	-D) read_arg dhcp_if "$@" || shift $?
-	    dracut_cmdline="${dracut_cmdline} ip=${dhcp_if}:dhcp"
-	    ;;
-	-I) read_arg static_if "$@" || shift $?
-	    dracut_cmdline="${dracut_cmdline} ip=$(ipconfig $static_if)":
-	    ;;
-	-a) read_arg acpi_dsdt "$@" || shift $?
-	    echo "Obsolete -a param, use acpi_table_dir= and acpi_override= variables in /etc/dracut.conf.d/"
-	    exit 1
-	    ;;
-	-s) read_arg boot_splash "$@" || shift $?
-	    echo "mkinitrd: boot splash not yet supported"
-	    exit 1
-	    ;;
-	-V) echo "mkinitrd: vendor scipts are no longer supported"
-	    exit 1;;
-	--dracut)
-	    read_arg dracut_cmd "$@" || shift $? ;;
-        --version|-R)
-            echo "mkinitrd: dracut compatibility wrapper"
-            exit 0;;
-	--quiet|-q) quiet=1;;
-        *)  if [[ ! $targets ]]; then
-            targets=$1
-            elif [[ ! $kernels ]]; then
-            kernels=$1
-            else
-            usage
-            fi;;
-    esac
-    shift
-done
-
-[[ $targets && $kernels ]] || default_kernel_images
-if [[ ! $targets || ! $kernels ]];then
-    error "No kernel found in $boot_dir or bad modules dir in /lib/modules"
-    exit 1
-fi
-
-# We can have several targets/kernels, transform the list to an array
-targets=( $targets )
-[[ $kernels ]] && kernels=( $kernels )
-
-[[ $logfile ]]        && dracut_args="${dracut_args} --logfile $logfile"
-dracut_args="${dracut_args} --force"
-
-[[ $dracut_cmdline ]] && dracut_args="${dracut_args} --kernel-cmdline ${dracut_cmdline}"
-[ -z "$(type -p update-bootloader)" ] && skip_update_bootloader=1
-
-# Update defaults from /etc/sysconfig/kernel
-if [ -f /etc/sysconfig/kernel ] ; then
-    . /etc/sysconfig/kernel
-fi
-[[ $module_list ]] || module_list="${INITRD_MODULES}"
-[[ $domu_module_list ]] || domu_module_list="${DOMU_INITRD_MODULES}"
-shopt -s extglob
-
-failed=""
-
-for ((i=0 ; $i<${#targets[@]} ; i++)); do
-
-    if [[ $img_vers ]];then
-	target="${targets[$i]}-${kernels[$i]}"
-    else
-	target="${targets[$i]}"
-    fi
-    kernel="${kernels[$i]}"
-
-    if is_xen_kernel $kernel $rootfs ; then
-	modules_all="${module_list} ${domu_module_list}"
-    else
-        modules_all="${module_list}"
-    fi
-
-    # Remove leading and trailing spaces needs (set above): shopt -s extglob
-    modules_all=${modules_all%%+([[:space:]])}
-    modules_all=${modules_all##+([[:space:]])}
-
-    echo "Creating initrd: $target"
-
-    # Duplicate code: No way found how to redirect output based on $quiet
-    if [[ $quiet == 1 ]];then
-        # Duplicate code: --force-drivers must not be called with empty string
-        # -> dracut bug workarounded ugly, because of complex whitespace
-        # expansion magics
-        if [ -n "${modules_all}" ];then
-            $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel" &>/dev/null
-            [ $? -ne 0 ] && failed="$failed $target"
-        else
-            $dracut_cmd $dracut_args "$target" "$kernel" &>/dev/null
-            [ $? -ne 0 ] && failed="$failed $target"
-        fi
-    else
-        if [ -n "${modules_all}" ];then
-            $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel"
-            [ $? -ne 0 ] && failed="$failed $target"
-        else
-            $dracut_cmd $dracut_args "$target" "$kernel"
-            [ $? -ne 0 ] && failed="$failed $target"
-        fi
-    fi
-done
-
-if [ "$skip_update_bootloader" ] ; then
-    echo 2>&1 "Did not refresh the bootloader. You might need to refresh it manually."
-else
-    update-bootloader --refresh
-    [ $? -ne 0 ] && echo "Updating bootloader failed" && exit 1
-fi
-
-if [ "$failed" != "" ]; then
-    echo "Generating $failed targets failed"
-    exit 1
-fi
-
-exit 0

mkinitrd.8

@@ -0,0 +1,103 @@
+'\" t
+.\"     Title: mkinitrd
+.\"    Author: [see the "AUTHORS" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
+.\"      Date: 07/17/2013
+.\"    Manual: dracut
+.\"    Source: dracut
+.\"  Language: English
+.\"
+.TH "MKINITRD" "8" "07/17/2013" "dracut" "dracut"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+mkinitrd \- is a compat wrapper, which calls dracut to generate an initramfs
+.SH "SYNOPSIS"
+.sp
+\fBmkinitrd\fR [\fIOPTION\&...\fR] [<initrd\-image>] <kernel\-version>
+.SH "DESCRIPTION"
+.sp
+mkinitrd creates an initramfs image <initrd\-image> for the kernel with version <kernel\-version> by calling "dracut"\&.
+.if n \{\
+.sp
+.\}
+.RS 4
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.ps +1
+\fBImportant\fR
+.ps -1
+.br
+.sp
+If a more fine grained control over the resulting image is needed, "dracut" should be called directly\&.
+.sp .5v
+.RE
+.SH "OPTIONS"
+.PP
+\fB\-\-version\fR
+.RS 4
+print info about the version
+.RE
+.PP
+\fB\-v, \-\-verbose\fR
+.RS 4
+increase verbosity level
+.RE
+.PP
+\fB\-f, \-\-force\fR
+.RS 4
+overwrite existing initramfs file\&.
+.RE
+.PP
+\fB*\-\-image\-version\fR
+.RS 4
+append the kernel version to the target image <initrd\-image>\-<kernel\-version>\&.
+.RE
+.PP
+\fB\-\-with=<module>\fR
+.RS 4
+add the kernel module <module> to the initramfs\&.
+.RE
+.PP
+\fB\-\-preload=<module>\fR
+.RS 4
+preload the kernel module <module> in the initramfs before any other kernel modules are loaded\&. This can be used to ensure a certain device naming, which should in theory be avoided and the use of symbolic links in /dev is encouraged\&.
+.RE
+.PP
+\fB\-\-nocompress\fR
+.RS 4
+do not compress the resulting image\&.
+.RE
+.PP
+\fB\-\-help\fR
+.RS 4
+print a help message and exit\&.
+.RE
+.SH "AVAILABILITY"
+.sp
+The mkinitrd command is part of the dracut package and is available from \m[blue]\fBhttps://dracut\&.wiki\&.kernel\&.org\fR\m[]
+.SH "AUTHORS"
+.sp
+Harald Hoyer
+.SH "SEE ALSO"
+.sp
+\fBdracut\fR(8)

mkinitrd.8.asc

@@ -1,65 +0,0 @@
-MKINITRD(8)
-=========
-:doctype: manpage
-:man source:   dracut
-:man manual:   dracut
-
-NAME
-----
-mkinitrd - is a compat wrapper, which calls dracut to generate an initramfs
-
-SYNOPSIS
---------
-*mkinitrd* ['OPTION...'] [<initrd-image>]  <kernel-version>
-
-DESCRIPTION
------------
-mkinitrd creates an initramfs image <initrd-image> for the kernel with
-version <kernel-version> by calling "dracut".
-
-[IMPORTANT]
-If a more fine grained control over the resulting image is needed,
-"dracut" should be called directly.
-
-OPTIONS
--------
-**--version**::
-    print info about the version
-
-**-v, --verbose**::
-    increase verbosity level
-
-**-f, --force**::
-    overwrite existing initramfs file.
-
-**--image-version*::
-    append the kernel version to the target image
-    <initrd-image>-<kernel-version>.
-
-**--with=<module>**::
-     add the kernel module <module> to the initramfs.
-
-**--preload=<module>**::
-     preload the kernel module <module> in the initramfs before any other kernel
-     modules are loaded. This can be used to ensure a certain device naming,
-     which should in theory be avoided and the use of symbolic links in /dev is
-     encouraged.
-
-**--nocompress**::
-     do not compress the resulting image.
-
-**--help**::
-    print a help message and exit.
-
-AVAILABILITY
-------------
-The mkinitrd command is part of the dracut package and is available from
-link:$$https://dracut.wiki.kernel.org$$[https://dracut.wiki.kernel.org]
-
-AUTHORS
--------
-Harald Hoyer
-
-SEE ALSO
---------
-*dracut*(8)

modules.d/00bash/module-setup.sh

@@ -1,21 +0,0 @@
-#!/bin/bash
-
-# called by dracut
-check() {
-    require_binaries /bin/bash
-}
-
-# called by dracut
-depends() {
-    return 0
-}
-
-# called by dracut
-install() {
-    # If another shell is already installed, do not use bash
-    [[ -x $initdir/bin/sh ]] && return
-
-    # Prefer bash as /bin/sh if it is available.
-    inst /bin/bash && ln -sf bash "${initdir}/bin/sh"
-}
-

modules.d/00bootchart/module-setup.sh

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-# called by dracut
-check() {
-    [[ "$mount_needs" ]] && return 1
-    require_binaries /sbin/bootchartd || return 1
-    return 255
-}
-
-# called by dracut
-depends() {
-    return 0
-}
-
-# called by dracut
-install() {
-    inst_symlink /init /sbin/init
-    inst_dir /lib/bootchart/tmpfs
-
-    inst_multiple bootchartd bash \
-        /lib/bootchart/bootchart-collector /etc/bootchartd.conf \
-        accton \
-        echo \
-        grep \
-        usleep
-
-    inst /usr/bin/pkill /bin/pkill
-    inst /usr/bin/[  /bin/[
-}
-

modules.d/00dash/check

@@ -0,0 +1,2 @@
+#!/bin/sh
+[ -x /bin/dash ]

modules.d/00dash/install

@@ -0,0 +1,6 @@
+#!/bin/bash
+# If another shell is already installed, do not use dash
+[ -x "${initdir}/bin/sh" ] && return
+
+# Prefer dash as /bin/sh if it is available.
+inst /bin/dash && ln -sf dash "${initdir}/bin/sh"

modules.d/00dash/module-setup.sh

@@ -1,21 +0,0 @@
-#!/bin/bash
-
-# called by dracut
-check() {
-    require_binaries /bin/dash
-}
-
-# called by dracut
-depends() {
-    return 0
-}
-
-# called by dracut
-install() {
-    # If another shell is already installed, do not use dash
-    [[ -x $initdir/bin/sh ]] && return
-
-    # Prefer dash as /bin/sh if it is available.
-    inst /bin/dash && ln -sf dash "${initdir}/bin/sh"
-}
-

modules.d/00systemd/module-setup.sh

@@ -1,240 +0,0 @@
-#!/bin/bash
-
-# called by dracut
-check() {
-    [[ $mount_needs ]] && return 1
-    if require_binaries $systemdutildir/systemd; then
-        SYSTEMD_VERSION=$($systemdutildir/systemd --version | { read a b a; echo $b; })
-        (( $SYSTEMD_VERSION >= 198 )) && return 0
-       return 255
-    fi
-
-    return 1
-}
-
-# called by dracut
-depends() {
-    return 0
-}
-
-installkernel() {
-    hostonly='' instmods autofs4 ipv6 algif_hash hmac sha256
-    instmods -s efivarfs
-}
-
-# called by dracut
-install() {
-    local _mods
-
-    if [[ "$prefix" == /run/* ]]; then
-        dfatal "systemd does not work with a prefix, which contains \"/run\"!!"
-        exit 1
-    fi
-
-    inst_multiple -o \
-        $systemdutildir/systemd \
-        $systemdutildir/systemd-coredump \
-        $systemdutildir/systemd-cgroups-agent \
-        $systemdutildir/systemd-shutdown \
-        $systemdutildir/systemd-reply-password \
-        $systemdutildir/systemd-fsck \
-        $systemdutildir/systemd-udevd \
-        $systemdutildir/systemd-journald \
-        $systemdutildir/systemd-sysctl \
-        $systemdutildir/systemd-modules-load \
-        $systemdutildir/systemd-vconsole-setup \
-        $systemdutildir/system-generators/systemd-fstab-generator \
-        $systemdutildir/system-generators/systemd-gpt-auto-generator \
-        \
-        $systemdsystemunitdir/cryptsetup.target \
-        $systemdsystemunitdir/emergency.target \
-        $systemdsystemunitdir/sysinit.target \
-        $systemdsystemunitdir/basic.target \
-        $systemdsystemunitdir/halt.target \
-        $systemdsystemunitdir/kexec.target \
-        $systemdsystemunitdir/local-fs.target \
-        $systemdsystemunitdir/local-fs-pre.target \
-        $systemdsystemunitdir/remote-fs.target \
-        $systemdsystemunitdir/remote-fs-pre.target \
-        $systemdsystemunitdir/multi-user.target \
-        $systemdsystemunitdir/network.target \
-        $systemdsystemunitdir/network-pre.target \
-        $systemdsystemunitdir/network-online.target \
-        $systemdsystemunitdir/nss-lookup.target \
-        $systemdsystemunitdir/nss-user-lookup.target \
-        $systemdsystemunitdir/poweroff.target \
-        $systemdsystemunitdir/reboot.target \
-        $systemdsystemunitdir/rescue.target \
-        $systemdsystemunitdir/rpcbind.target \
-        $systemdsystemunitdir/shutdown.target \
-        $systemdsystemunitdir/final.target \
-        $systemdsystemunitdir/sigpwr.target \
-        $systemdsystemunitdir/sockets.target \
-        $systemdsystemunitdir/swap.target \
-        $systemdsystemunitdir/timers.target \
-        $systemdsystemunitdir/paths.target \
-        $systemdsystemunitdir/umount.target \
-        \
-        $systemdsystemunitdir/sys-kernel-config.mount \
-        \
-        $systemdsystemunitdir/kmod-static-nodes.service \
-        $systemdsystemunitdir/systemd-tmpfiles-setup.service \
-        $systemdsystemunitdir/systemd-tmpfiles-setup-dev.service \
-        $systemdsystemunitdir/systemd-ask-password-console.path \
-        $systemdsystemunitdir/systemd-udevd-control.socket \
-        $systemdsystemunitdir/systemd-udevd-kernel.socket \
-        $systemdsystemunitdir/systemd-ask-password-plymouth.path \
-        $systemdsystemunitdir/systemd-journald.socket \
-        $systemdsystemunitdir/systemd-journald-audit.socket \
-        $systemdsystemunitdir/systemd-ask-password-console.service \
-        $systemdsystemunitdir/systemd-modules-load.service \
-        $systemdsystemunitdir/systemd-halt.service \
-        $systemdsystemunitdir/systemd-poweroff.service \
-        $systemdsystemunitdir/systemd-reboot.service \
-        $systemdsystemunitdir/systemd-kexec.service \
-        $systemdsystemunitdir/systemd-fsck@.service \
-        $systemdsystemunitdir/systemd-udevd.service \
-        $systemdsystemunitdir/systemd-udev-trigger.service \
-        $systemdsystemunitdir/systemd-udev-settle.service \
-        $systemdsystemunitdir/systemd-ask-password-plymouth.service \
-        $systemdsystemunitdir/systemd-journald.service \
-        $systemdsystemunitdir/systemd-vconsole-setup.service \
-        $systemdsystemunitdir/systemd-random-seed-load.service \
-        $systemdsystemunitdir/systemd-random-seed.service \
-        $systemdsystemunitdir/systemd-sysctl.service \
-        \
-        $systemdsystemunitdir/sysinit.target.wants/systemd-modules-load.service \
-        $systemdsystemunitdir/sysinit.target.wants/systemd-ask-password-console.path \
-        $systemdsystemunitdir/sysinit.target.wants/systemd-journald.service \
-        $systemdsystemunitdir/sockets.target.wants/systemd-udevd-control.socket \
-        $systemdsystemunitdir/sockets.target.wants/systemd-udevd-kernel.socket \
-        $systemdsystemunitdir/sockets.target.wants/systemd-journald.socket \
-        $systemdsystemunitdir/sockets.target.wants/systemd-journald-audit.socket \
-        $systemdsystemunitdir/sockets.target.wants/systemd-journald-dev-log.socket \
-        $systemdsystemunitdir/sysinit.target.wants/systemd-udevd.service \
-        $systemdsystemunitdir/sysinit.target.wants/systemd-udev-trigger.service \
-        $systemdsystemunitdir/sysinit.target.wants/kmod-static-nodes.service \
-        $systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup.service \
-        $systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup-dev.service \
-        $systemdsystemunitdir/sysinit.target.wants/systemd-sysctl.service \
-        \
-        $systemdsystemunitdir/ctrl-alt-del.target \
-        $systemdsystemunitdir/reboot.target \
-        $systemdsystemunitdir/systemd-reboot.service \
-        $systemdsystemunitdir/syslog.socket \
-        \
-        $systemdsystemunitdir/slices.target \
-        $systemdsystemunitdir/system.slice \
-        $systemdsystemunitdir/-.slice \
-        \
-        $tmpfilesdir/systemd.conf \
-        \
-        journalctl systemctl \
-        echo swapoff \
-        kmod insmod rmmod modprobe modinfo depmod lsmod \
-        mount umount reboot poweroff \
-        systemd-run systemd-escape \
-        systemd-cgls systemd-tmpfiles \
-        /etc/udev/udev.hwdb \
-        ${NULL}
-
-    inst_multiple -o \
-        /usr/lib/modules-load.d/*.conf \
-        /usr/lib/sysctl.d/*.conf
-
-    modules_load_get() {
-        local _line i
-        for i in "$1"/*.conf; do
-            [[ -f $i ]] || continue
-            while read _line || [ -n "$_line" ]; do
-                case $_line in
-                    \#*)
-                        ;;
-                    \;*)
-                        ;;
-                    *)
-                        echo $_line
-                esac
-            done < "$i"
-        done
-    }
-
-    _mods=$(modules_load_get /usr/lib/modules-load.d)
-    [[ $_mods ]] && hostonly='' instmods $_mods
-
-    if [[ $hostonly ]]; then
-        inst_multiple -H -o \
-            /etc/systemd/journald.conf \
-            /etc/systemd/journald.conf.d/*.conf \
-            /etc/systemd/system.conf \
-            /etc/systemd/system.conf.d/*.conf \
-            /etc/hostname \
-            /etc/machine-id \
-            /etc/machine-info \
-            /etc/vconsole.conf \
-            /etc/locale.conf \
-            /etc/modules-load.d/*.conf \
-            /etc/sysctl.d/*.conf \
-            /etc/sysctl.conf \
-            /etc/udev/udev.conf \
-            ${NULL}
-
-        _mods=$(modules_load_get /etc/modules-load.d)
-        [[ $_mods ]] && hostonly='' instmods $_mods
-    fi
-
-    if ! [[ -e "$initdir/etc/machine-id" ]]; then
-        > "$initdir/etc/machine-id"
-    fi
-
-    # install adm user/group for journald
-    inst_multiple nologin
-    grep '^systemd-journal:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
-    grep '^adm:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
-    grep '^systemd-journal:' /etc/group >> "$initdir/etc/group"
-    grep '^wheel:' /etc/group >> "$initdir/etc/group"
-    grep '^adm:' /etc/group >> "$initdir/etc/group"
-    grep '^utmp:' /etc/group >> "$initdir/etc/group"
-    grep '^root:' /etc/group >> "$initdir/etc/group"
-
-    # we don't use systemd-networkd, but the user is in systemd.conf tmpfiles snippet
-    grep '^systemd-network:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
-    grep '^systemd-network:' /etc/group >> "$initdir/etc/group"
-
-    ln_r $systemdutildir/systemd "/init"
-    ln_r $systemdutildir/systemd "/sbin/init"
-
-    inst_binary true
-    ln_r $(type -P true) "/usr/bin/loginctl"
-    ln_r $(type -P true) "/bin/loginctl"
-    inst_rules \
-        70-uaccess.rules \
-        71-seat.rules \
-        73-seat-late.rules \
-        90-vconsole.rules \
-        99-systemd.rules \
-        ${NULL}
-
-    for i in \
-        emergency.target \
-        rescue.target \
-        systemd-ask-password-console.service \
-        systemd-ask-password-plymouth.service \
-        ; do
-        mkdir -p "${initdir}${systemdsystemunitdir}/${i}.wants"
-        ln_r "${systemdsystemunitdir}/systemd-vconsole-setup.service" \
-            "${systemdsystemunitdir}/${i}.wants/systemd-vconsole-setup.service"
-    done
-
-    mkdir -p "$initdir/etc/systemd"
-    # We must use a volatile journal, and we don't want rate-limiting
-    {
-        echo "[Journal]"
-        echo "Storage=volatile"
-        echo "RateLimitInterval=0"
-        echo "RateLimitBurst=0"
-    } >> "$initdir/etc/systemd/journald.conf"
-
-    ln_r "${systemdsystemunitdir}/multi-user.target" "${systemdsystemunitdir}/default.target"
-}
-