Update ChangeLog

Fix the comparison between respawn_count and respawn_max so that
respawn_max = 1 will allow for one respawn. Since respawn_count is
incremented before the comparison, use a 'greater than' comparison
so that respawn will be triggered when respawn_count is equal to
respawn_max.

Fixes: https://github.com/OpenRC/openrc/issues/247
Fixes: https://github.com/OpenRC/openrc/issues/248

.gitignore

@@ -1,4 +1,4 @@
-*.bz2
+*.gz
 
 *.diff
 *.patch

BUSYBOX.md

@@ -1,4 +1,5 @@
-# Using Busybox as your Default Shell with OpenRC
+Using Busybox as your Default Shell with OpenRC
+===============================================
 
 If you have/bin/sh linked to busybox, you need to be aware of several
 incompatibilities between busybox's applets and the standalone
@@ -22,9 +23,6 @@ or recognize the nofail option in fstab.
 
 CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
 
-CONFIG_IP -- The ip applet  doesn't support the "scope" modifier for
-"ip route add" and "ip address add".
-
 CONFIG_BB_SYSCTL -- The sysctl applet does not support the --system command
 line switch.
 

FEATURE-REMOVAL-SCHEDULE.md

@@ -1,11 +1,12 @@
-# Features Scheduled for Removal
+Features Scheduled for Removal
+==============================
 
 The following is a list of files and features that are going to be removed in
 the source tree.  Every entry should contain what exactly is going away, why it
 is happening, and who is going to be doing the work.  When the feature is
 removed, it should also be removed from this file.
 
-## Service pause action
+# Service pause action
 
 When: 1.0
 
@@ -13,7 +14,7 @@ Why: The same affect can be obtained with the --nodeps option to stop.
 
 Who:
 
-## start-stop-daemon options --startas, --chuid , --oknodo
+# start-stop-daemon options --startas, --chuid , --oknodo
 
 When: 1.0
 
@@ -25,7 +26,7 @@ Why: Obsolete or replaced by other options.
 
 Who:
 
-## runscript and rc symbolic links
+# runscript and rc symbolic links
 
 When: 1.0
 
@@ -34,24 +35,24 @@ Why: Deprecated in favor of openrc-run and openrc due to naming
 
 Who:
 
-## support for the opts variable in service scripts
+# support for the opts variable in service scripts
 
 When: 1.0
 
-Why: Depprecated in favor of extra_commands, extra_started_commands
+Why: Deprecated in favor of extra_commands, extra_started_commands
 	 and extra_stopped_commands.
 
 Who:
 
-## support for local_start and local_stop
+# support for local_start and local_stop
 
 When: 1.0
 
-Why: Depprecated in favor of executable scripts in @SYSCONFDIR@/local.d
+Why: Deprecated in favor of executable scripts in @SYSCONFDIR@/local.d
 
 Who:
 
-## the mtab service script
+# the mtab service script
 
 When: force /etc/mtab to link to /proc/self/mounts in 1.0, remove
 	  service in 2.0
@@ -61,13 +62,13 @@ Why: /etc/mtab should be a symbolic link to /proc/self/mounts on modern
 
 Who:
 
-## C API Functions in rc.h
+# C API Functions in rc.h
 
 If you have a c program that links to librc and uses functions from
 there, this section will list API functions which are deprecated and
 will be removed along with the reason they are being removed.
 
-### rc_getline()
+## rc_getline()
 
 When: 1.0
 

HISTORY.md

@@ -1,4 +1,5 @@
-# OpenRC History
+OpenRC History
+==============
 
 This history of OpenRC was written by Daniel Robbins, Roy Marples, William
 Hubbs and others.

Makefile

@@ -13,7 +13,13 @@ MK=			${TOP}/mk
 
 include ${TOP}/Makefile.inc
 
-SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
+SUBDIR=		conf.d etc init.d local.d man scripts sh src support sysctl.d
+
+# Build bash completion or not
+MKBASHCOMP?=	no
+ifeq (${MKBASHCOMP},yes)
+SUBDIR+=	bash-completion
+endif
 
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes
@@ -21,6 +27,12 @@ ifeq (${MKPKGCONFIG},yes)
 SUBDIR+=	pkgconfig
 endif
 
+# Build zsh completion or not
+MKZSHCOMP?=	no
+ifeq (${MKZSHCOMP},yes)
+SUBDIR+=	zsh-completion
+endif
+
 # We need to ensure that runlevels is done last
 SUBDIR+=	runlevels
 

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.20.4
+VERSION=	0.38.3
 PKG=		${NAME}-${VERSION}

NEWS.md

@@ -1,8 +1,170 @@
-# OpenRC NEWS
+OpenRC NEWS
+===========
 
 This file will contain a list of notable changes for each release. Note
 the information in this file is in reverse order.
 
+## OpenRC 0.37
+
+start-stop-daemon now supports logging stdout and stderr of daemons to
+processes instead of files. These processes are defined by the
+output_logger and error_logger variables in standard service scripts, or
+by the  -3/--output-logger or -4/--error-logger switches if you use
+start-stop-daemon directly. For more information on this, see the
+start-stop-daemon man page.
+
+## OpenRC 0.36
+
+In this release, the modules-load service has been combined into the
+modules service since there is no reason I know of to keep them
+separate. However, modules also provides modules-load in case you were
+using modules-load in  your dependencies.
+
+The consolefont, keymaps, numlock and procfs service scripts no longer
+have a dependency on localmount.
+If you are a linux user and are still separaating / from /usr,
+you will need to add the following line to the appropriate conf.d files:
+
+rc_need="localmount"
+
+## OpenRC 0.35
+
+In this version, the cgroups mounting logic has been moved from the
+sysfs service to the cgroups service. This was done so cgroups can be
+mounted inside an lxc/lxd container without using the other parts of the
+sysfs service.
+
+?As a result of this change, if you are upgrading, you need to add
+cgroups to your sysinit runlevel by running the following command as
+root:
+
+```
+# rc-update add cgroups sysinit
+```
+
+For more information, see the following issue:
+
+https://github.com/openrc/openrc/issues/187
+
+Consider this your second notification with regard to /etc/mtab being a
+file instead of a symbolic link.
+
+In this version, the mtab service will complain loudly if you have
+mtab_is_file set to yes and recommend that you change this to no and
+restart the mtab service to migrate /etc/mtab to a symbolic link.
+
+If there is a valid technical reason to keep /etc/mtab as a flat file
+instead of a symbolic link to /proc/self/mounts, we are interested and
+we will keep the support in that case. Please open an issue and let us
+know however. Otherwise, consider this your final notice that the mtab
+service will be removed in the future.
+
+## OpenRC 0.33
+
+This version removes the "service" binary which was just a copy of
+"rc-service" provided for compatibility.
+
+If you still need the "service" binary, as opposed to "rc-service", it is
+recommended that you use something like Debian's init-system-helpers.
+Otherwise, just use "rc-service" in place of "service".
+
+## OpenRC 0.31
+
+This version adds support for Control Groups version 2, which is
+considered stable as of Linux-4.13. Please see /etc/rc.conf for
+documentation on how to configure control groups.
+
+## OpenRC-0.28
+
+This version mounts efivars read only due to concerns about changes in
+this file system making systems unbootable.  If you need to change something
+in this path, you will need to re-mount it read-write, make the change
+and re-mount it read-only.
+
+Also, you can override this behavior by adding a line for efivars to
+fstab if you want efivars mounted read-write.
+
+For more information on this issue, see the following url:
+
+https://github.com/openrc/openrc/issues/134
+
+## OpenRC-0.25
+
+This version contains an OpenRC-specific implementation of init for
+Linux which can be used in place of sysvinit or any other init process.
+For information on its usage, see the man pages for openrc-init (8) and
+openrc-shutdown (8).
+
+## OpenRC-0.24.1
+
+This version starts cleaning up the dependencies so that rc_parallel
+will work correctly.
+
+The first step in this process is to remove the 'before *' from the
+depend functions in the clock services. This means some  services not
+controlled by OpenRC may now start before instead of after the clock
+service. If it is important for these services to start after the clock
+service, they need to have 'after clock' added to their depend
+functions.
+
+## OpenRC-0.24
+
+Since the deptree2dot tool and the perl requirement are completely
+optional, the deptree2dot tool has been moved to the support directory.
+As a result, the MKTOOLS=yes/no switch has been removed from the makefiles.
+
+This version adds the agetty service which can be used to spawn
+agetty on a specific terminal. This is currently documented in the
+agetty-guide.md file at the top level of this distribution.
+
+## OpenRC-0.23
+
+The tmpfiles.d processing code, which was part of previous versions of
+OpenRC, has been separated into its own package [1]. If you need to
+process systemd style tmpfiles.d files, please install this package.
+
+[1] https://github.com/openrc/opentmpfiles
+
+## OpenRC-0.22
+
+In previous versions of OpenRC, configuration information was processed
+so that service-specific configuration stored in /etc/conf.d/* was
+overridden by global configuration stored in /etc/rc.conf. This release
+reverses that. Global configuration is now overridden by
+service-specific configuration.
+
+The swapfiles service, which was basically a copy of the swap service,
+has been removed. If you are only using swap partitions, this change
+will not affect you. If you are using swap files, please adjust the
+dependencies of the swap service as shown in /etc/conf.d/swap.
+
+## OpenRC-0.21
+
+This version adds a daemon supervisor which can start daemons and
+restart them if they crash. See supervise-daemon-guide.md in the
+distribution for details on its use.
+
+It is now possible to mark certain mount points as critical. If these
+mount points are unable to be mounted, localmount or netmount will fail.
+This is handled in /etc/conf.d/localmount and /etc/conf.d/netmount. See
+these files for the setup.
+
+The deprecation messages in 0.13.x for runscript and rc are now
+made visible in preparation for the removal of these binaries in 1.0.
+
+The steps you should take to get rid of these warnings is to run openrc
+in initialization steps instead of rc and change the shebang lines in
+service scripts to refer to "openrc-run" instead of "runscript".
+
+In 0.21.4, a modules-load service was added. This works like the
+equivalent service in systemd. It looks for files named *.conf first in
+/usr/lib/modules-load.d, then /run/modules-load.d, then
+/etc/modules-load.d. These files contain a list of modules, one per
+line, which should be loaded into the kernel. If a file name appears in
+/run/modules-load.d, it overrides a file of the same name in
+/usr/lib/modules-load.d. A file appearing in /etc/modules-load.d
+overrides a file of the same name in both previous directories.
+
 ## OpenRC-0.19
 
 This version adds a net-online service. By default, this

README.md

@@ -1,4 +1,5 @@
-# OpenRC README
+OpenRC README
+=============
 
 OpenRC is a dependency-based init system that works with the
 system-provided init program, normally `/sbin/init`. Currently, it does
@@ -22,15 +23,17 @@ below arguments to the make command
 PROGLDFLAGS=-static
 LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
+MKBASHCOMP=no
 MKNET=no
 MKPAM=pam
 MKPREFIX=yes
 MKPKGCONFIG=no
 MKSELINUX=yes
 MKSTATICLIBS=no
+MKSYSVINIT=yes
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
-MKTOOLS=yes
+MKZSHCOMP=no
 PKG_PREFIX=/usr/pkg
 LOCAL_PREFIX=/usr/local
 PREFIX=/usr/local
@@ -43,9 +46,6 @@ We don't support building a static OpenRC with PAM.
 
 You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`.
 
-If you debug memory under valgrind, add `-DDEBUG_MEMORY`
-to your `CPPFLAGS` so that all malloc memory should be freed at exit.
-
 If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`.
 
 `PKG_PREFIX` should be set to where packages install to by default.
@@ -76,10 +76,6 @@ Obviously, if you're installing this onto a system that does not use
 OpenRC by default then you may wish to backup the above listed files,
 remove them and then install so that the OS hooks into OpenRC.
 
-`init.d.misc` is not installed by default as the scripts will need
-tweaking on a per distro basis. They are also non essential to the
-operation of the system.
-
 ## Reporting Bugs
 
 If you are using Gentoo Linux, bugs can be filed on their bugzilla under

STYLE-GUIDE.md

@@ -1,4 +1,5 @@
-# OpenRC Style Guide
+OpenRC Coding Style Guide
+=========================
 
 This is the openrc style manual.  It governs the coding style of all code
 in this repository.  Follow it.  Contact openrc@gentoo.org for any questions

agetty-guide.md

@@ -0,0 +1,19 @@
+Setting up the agetty service in OpenRC
+=================================xxxxxx
+
+The agetty service is an OpenRC specific way to monitor and respawn a
+getty, using agetty, on Linux. To use this method, make sure you aren't
+spawning a getty manager for this port some other way (such as through
+sysvinit/inittab), then run the following commands as root.
+
+Note that [port] refers to the port you are spawning the getty on, for
+example, tty1 or ttyS0. The full path to it, for example, /dev/tty1
+should not be used.
+
+```
+# cd /etc/init.d
+# ln -s agetty agetty.[port]
+# cd /etc/conf.d
+# cp agetty agetty.[port]
+#rc-update add agetty.[port] [runlevel]
+```

bash-completion/Makefile

@@ -0,0 +1,11 @@
+DIR=	${BASHCOMPDIR}
+CONF=	openrc \
+		openrc-service-script \
+		rc-service \
+		rc-status \
+		rc-update \
+
+MK=	../mk
+include ${MK}/os.mk
+
+include ${MK}/scripts.mk

bash-completion/openrc

@@ -1,5 +1,4 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2017 The OpenRC Authors.
 # See the Authors file at the top-level directory of this distribution and
 # https://github.com/OpenRC/openrc/blob/master/AUTHORS
 #
@@ -9,18 +8,17 @@
 # This file may not be copied, modified, propagated, or distributed
 # except according to the terms contained in the LICENSE file.
 
-depend()
+#
+# openrc completion command
+#
+_openrc()
 {
-	before bootmisc logger
-	keyword -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	local quiet
-	yesno $rc_verbose || quiet=-q
-
-	ebegin "Configuring kernel parameters"
-	sysctl ${quiet} --system
-	eend $? "Unable to configure some kernel parameters"
-}
+	local cur
+	COMPREPLY=()
+	cur="${COMP_WORDS[COMP_CWORD]}"
+	if [[ ${#COMP_WORDS[*]} -le 2 ]]; then
+		COMPREPLY=($(compgen -W "$(rc-status --list)" -- $cur))
+	fi
+	return 0
+} &&
+complete -F _openrc openrc

bash-completion/openrc-service-script

@@ -0,0 +1,29 @@
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+_openrc_service_script()
+{
+	local script="${COMP_WORDS[0]}"
+	local cur="${COMP_WORDS[$COMP_CWORD]}"
+
+	if [[ ( -f "${script}" || -h "${script}" ) && -r "${script}" ]] \
+	&& [[ "$(head -n 1 "${script}")" =~ \#\!.*/openrc-run ]]
+	then
+		[[ $COMP_CWORD -gt 1 ]] && return 1
+		COMPREPLY=($(opts="start stop status restart pause zap ineed needsme iuse usesme broken"; \
+			eval "$(grep '^opts=' "${script}")"; echo "${opts}"))
+		[[ -n "$COMPREPLY" ]] || COMPREPLY=(start stop restart zap)
+		COMPREPLY=($(compgen -W "${COMPREPLY[*]}" -- "${cur}"))
+	else
+		COMPREPLY=($(compgen -o default -- "${cur}"))
+	fi
+	return 0
+}
+complete -F _openrc_service_script */etc/init.d/*

bash-completion/rc-service

@@ -0,0 +1,113 @@
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+#
+# rc-service completion command
+#
+_rc_service()
+{
+	local cur prev numwords opts
+	local words i x filename
+	local action actionpos
+	COMPREPLY=()
+	cur="${COMP_WORDS[COMP_CWORD]}"
+	prev="${COMP_WORDS[COMP_CWORD-1]}"
+	numwords=${#COMP_WORDS[*]}
+
+	if [[ ${prev} == '>' || ${prev} == '<' ]] ; then
+		COMPREPLY=($(compgen -f -- ${cur}))
+		return 0
+	fi
+
+	# find action
+	for x in ${COMP_LINE} ; do
+		if [[ ${x} =~ --(list|exists|resolve) ]] || [[ ${x} =~ -(l|e|r) ]]
+		then
+			action=${x}
+			break
+		fi
+	done
+	if [[ -n ${action} ]]; then
+		for ((i = 0; i < ${numwords}; i++ )); do
+			if [[ ${COMP_WORDS[${i}]} == "${action}" ]]; then
+				actionpos=${i}
+				break
+			fi
+		done
+
+		for ((i = 1; i < ${numwords}; i++ )); do
+			if [[ ! ${COMP_WORDS[$i]} == -* ]]; then
+				break
+			fi
+		done
+	fi
+
+	if [[ ${COMP_CWORD} -eq 3 ]]; then
+		return 1
+	fi
+
+	# check if an option was typed
+	if [[ ${cur} == -* ]]; then
+		if [[ ${cur} == --* ]]; then
+			opts="--list --exists --resolve"
+			COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+			return 0
+		elif [[ ${cur} == -* ]]; then
+			opts="-l -e -r"
+			COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+			return 0
+		fi
+
+		# NOTE: This slows things down!
+		# (Adapted from bash_completion by Ian Macdonald <ian@caliban.org>)
+		# This removes any options from the list of completions that have
+		# already been specified on the command line.
+		COMPREPLY=($(echo "${COMP_WORDS[@]}" | \
+		(while read -d ' ' i; do
+			[[ -z ${i} ]] && continue
+			# flatten array with spaces on either side,
+			# otherwise we cannot grep on word boundaries of
+			# first and last word
+			COMPREPLY=" ${COMPREPLY[@]} "
+			# remove word from list of completions
+			COMPREPLY=(${COMPREPLY/ ${i%% *} / })
+		done
+		echo ${COMPREPLY[@]})))
+
+		return 0
+	else
+		# no option was typed
+		if [[ ${COMP_CWORD} -eq 1 ]]; then			  # if first word typed
+			words="$(rc-service --list | grep ^${cur})"		  # complete for init scripts
+			COMPREPLY=($(for i in ${words} ; do \
+			[[ ${i} == ${cur}* ]] && echo ${i} ; \
+			done))
+			return 0
+		elif [[ ${COMP_CWORD} -eq 2 ]] && [[ ${prev} != -* ]]; then # if second word typed and we didn't type in a function
+			filename=$(rc-service --resolve ${prev})
+			opts=$(cat ${filename} | grep "^\w*()" | sed "s/().*$//")	# Greps the functions included in the init script
+			if [[ "x${opts}" == "x" ]] ; then			   # if no options found loosen the grep algorhythm
+				opts=$(cat ${filename} | grep "\w*()" | sed "s/().*$//")
+			fi
+			COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+			return 0
+		fi
+	fi
+	if [[ ${action} == '--exists' ]] || [[ ${action} == '-e' ]] || \
+		[[ ${action} == '--resolve' ]]  || [[ ${action} == '-r' ]]; then
+		words="$(rc-service --list | grep ^${cur})"
+		COMPREPLY=($(for i in ${words} ; do \
+			[[ ${i} == ${cur}* ]] && echo ${i} ; \
+		done))
+		return 0
+	fi
+	return 0
+} &&
+complete -F _rc_service rc-service

bash-completion/rc-status

@@ -0,0 +1,31 @@
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+#
+# rc-status completion command
+#
+_rcstatus()
+{
+	local cur
+	cur="${COMP_WORDS[COMP_CWORD]}"
+	if [[ $COMP_CWORD -eq 1 ]]; then
+		if [[ "${cur}" == --* ]]; then
+			COMPREPLY=($(compgen -W '--all --list --unused' -- ${cur}))
+		elif [[ "${cur}" == -* ]]; then
+			COMPREPLY=($(compgen -W '-a -l -u' -- ${cur}))
+		else
+			COMPREPLY=($(compgen -W "$(rc-status --list)" -- ${cur}))
+		fi
+	else
+		unset COMPREPLY
+	fi
+	return 0
+} &&
+complete -F _rcstatus rc-status

bash-completion/rc-update

@@ -0,0 +1,42 @@
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+#
+# rc-update completion command
+#
+_rc_update()
+{
+	local cur show
+	COMPREPLY=()
+	cur="${COMP_WORDS[COMP_CWORD]}"
+	if [[ $COMP_CWORD -eq 1 ]]; then
+		if [[ "${cur}" == -* ]]; then
+			COMPREPLY=($(compgen -W '-a -d -s' -- ${cur}))
+		else
+			COMPREPLY=($(compgen -W 'add del show' ${cur}))
+		fi
+	else
+		if [[ "${COMP_WORDS[1]}" == "show" ]] || [[ "${COMP_WORDS[1]}" == "-s" ]]; then
+			show="TRUE"
+		fi
+		if ([[ $COMP_CWORD -eq 3 ]] && [[ -z "$show" ]]) || \
+			([[ $COMP_CWORD -eq 2 ]] && [[ -n "$show" ]]); then
+		COMPREPLY=($(compgen -W "$(rc-status --list)" -- $cur))
+		elif [[ $COMP_CWORD -eq 2 ]]; then
+			COMPREPLY=($(compgen -W "$(rc-service --list)" $cur))
+		elif [[ ${#COMP_WORDS[*]} -gt 2 ]] ; then
+			COMPREPLY=($(compgen -W "$(rc-status --list)" -- $cur))
+		else
+			unset COMPREPLY
+		fi
+	fi
+	return 0
+} &&
+complete -F _rc_update rc-update

conf.d/.gitignore

@@ -1,2 +0,0 @@
-network
-staticroute

conf.d/Makefile

@@ -1,29 +1,20 @@
 include ../mk/net.mk
 
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
-		${CONF-${OS}}
+CONF=	bootmisc fsck hostname localmount netmount swap urandom ${CONF-${OS}}
 
 ifeq (${MKNET},yes)
 CONF+= network staticroute
-TARGETS+=	network staticroute
-CLEANFILES+=	network staticroute
 endif
 
 MK=	../mk
 include ${MK}/os.mk
 
-CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
+CONF-FreeBSD=	ipfw modules moused powerd rarpd savecore syscons
 
-CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules mtab \
-	net-online
+CONF-Linux=	agetty consolefont devfs dmesg hwclock keymaps killprocs modules \
+	mtab net-online
 
 CONF-NetBSD=	moused rarpd savecore
 
 include ${MK}/scripts.mk
-
-network: network.in network${SFX}
-	cat $^ > $@
-
-staticroute: staticroute${SFX}
-	cp $@${SFX} $@

conf.d/agetty

@@ -0,0 +1,11 @@
+# make agetty quiet
+#quiet="yes"
+
+# Set the baud rate of the terminal line
+#baud=""
+
+# set the terminal type
+#term_type="linux"
+
+# extra options to pass to agetty for this port
+#agetty_options=""

conf.d/bootmisc

@@ -9,7 +9,7 @@ wipe_tmp="YES"
 # This may be useful if you need the kernel boot log afterwards
 log_dmesg="YES"
 
-# Save the previous dmesg log to dmesc.old
+# Save the previous dmesg log to dmesg.old
 # This may be useful if you need to compare the current boot to the
 # previous one.
 #previous_dmesg=no

conf.d/killprocs

@@ -1,3 +1,6 @@
-# If you wish to pass any options to killall5 during shutdown,
+# If you wish to pass any options to kill_all during shutdown,
 # you should do so here.
+#
+# The setting is called killall5_opts because the options here are meant
+# to be identical to those you could pass to killall5.
 killall5_opts=""

conf.d/localmount

@@ -2,8 +2,9 @@
 # This could be useful for some NFS related work.
 #no_umounts="/dir1:/var/dir2"
 #
-# Ignore errors when mounting local file systems.
-# This should be left alone unless you know what you are doing. If it is
-# set to yes, not only will we allow mount failures, but we will ignore
-# syntax errors in fstab.
-#ignore_mount_errors="NO"
+# Mark certain mount points as critical.
+# This contains a space separated list of mount points which should be
+# considered critical. If one of these mount points cannot be mounted,
+# localmount will fail.
+# By default, this is empty.
+#critical_mounts="/home /var"

conf.d/modules

@@ -1,18 +1,22 @@
-# You can define a list modules for a specific kernel version,
-# a released kernel version, a main kernel version or just a list.
+# Linux users can define a list of modules for a specific kernel version,
+# a released kernel version, a main kernel version or all kernel versions.
 # The most specific versioned variable will take precedence.
+# FreeBSD users can only use the modules="foo bar" setting.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
 #modules_2="ipv6"
 #modules="ohci1394"
 
-# You can give modules a different name when they load - the new name
+# Linux users can give modules a different name when they load - the new name
 # will also be used to pick arguments below.
+# This is not supported on FreeBSD.
 #modules="dummy:dummy1"
 
-# Give the modules some arguments if needed, per version if necessary.
+# Linux users can give the modules some arguments if needed, per version
+# if necessary.
 # Again, the most specific versioned variable will take precedence.
+# This is not supported on FreeBSD.
 #module_ieee1394_args="debug"
 #module_ieee1394_args_2_6_23_gentoo_r5="debug2"
 #module_ieee1394_args_2_6_23="debug3"

conf.d/mtab

@@ -1,5 +1,13 @@
+# As far as we are aware, there are no modern linux tools or use cases
+# which require /etc/mtab to be a separate file from /proc/self/mounts,
+# so this setting should be commented out.
+# If it is set to yes, please comment it out and run this command:
+# # rc-service mtab restart
+# In the future, the mtab service will be removed since we are not aware
+# of any need to manipulate /etc/mtab as a separate file from
+# /proc/self/mounts.
+# If you have a technical reason we should keep this support, please
+# open an issue at https://github.com/openrc/openrc/issues and let us
+# know about your situation.
 # This setting controls whether /etc/mtab is a file or symbolic link.
-# Most of the time, you shouldn't touch this. However, if the default
-# breaks your system in some way, please see the NEWS.md file that comes
-# with OpenRC for the actions to take.
 # mtab_is_file=no

conf.d/net-online

@@ -1,12 +1,15 @@
 # The interfaces setting controls which interfaces the net-online
-# service considers in deciding whether the network is active. By
-# default, it is all ethernet or wireless LAN interfaces.
+# service considers in deciding whether the network is active. The
+# default is all interfaces that support ethernet.
 #interfaces=""
 
-# This setting controls whether a ping to the default gateway is
-# included in the test for network connectivity after all interfaces
-# are active.
-#ping_default_gateway=no
+# This setting controls whether a ping test is included in the test for
+# network connectivity after all interfaces are active.
+#include_ping_test=no
+
+# This setting is the host to attempt to ping if the above is yes.
+# The default is google.com.
+#ping_test_host=some.host.name
 
 # The timeout setting controls how long the net-online service waits
 # for the network to be configured.

conf.d/netmount

@@ -38,3 +38,10 @@
 # other words, please change it to be more suited to your system.
 #
 rc_need="net"
+#
+# Mark certain mount points as critical.
+# This contains aspace separated list of mount points which should be
+# considered critical. If one of these mount points cannot be mounted,
+# netmount will fail.
+# By default, this is empty.
+#critical_mounts="/home /var"

conf.d/network

@@ -0,0 +1,80 @@
+# Assign static IP addresses and run custom scripts per interface.
+# Seperate commands with ;
+# Prefix with ! to run a shell script.
+# Use \$int to represent the interface
+#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
+
+# You also have ifup_eth0 and ifdown_eth0 to run other commands when
+# eth0 is started and stopped.
+# You should note that we don't stop the network at system shutdown by default.
+# If you really need this, then set keep_network=NO
+
+# Lastly, the interfaces variable pulls in virtual interfaces that cannot
+# be automatically detected.
+#interfaces="br0 bond0 vlan0"
+
+# You can also use files instead of variables here if you like:
+# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
+# /etc/ip.eth0 is equivalent to ifconfig_eth0
+# /etc/ifup.eth0 is equivalent to ifup_eth0
+# /etc/ifdown.eth0 is equivalent to ifdown_eth0
+# Any files found will automatically be put into the interfaces variable.
+# You don't need to escape variables in files, so use $int instead of \$int.
+
+# If you require DHCP, you should install dhcpcd and add it to the boot or
+# default runlevel.
+
+# NIS users can set the domain name here
+#domainname="foobar"
+
+# You can add a default route.
+# The way this is done is slightly different depending on the operating system.
+#
+# *BSD:
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"
+#Hurd/Linux (ifconfig):
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"
+
+# The remainder of this file applies to Linux only and shows how
+# iproute2 is supported along with other examples.
+
+# ifconfig under Linux is not that powerful and doesn't easily handle
+# multiple addresses
+# On the other hand, iproute2 is quite powerful and is also supported
+#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
+
+# You can also use iproute2 to add the default route.
+#defaultiproute="via 192.168.0.1"
+#defaultiproute6="via 2001:a:b:c"
+
+# ip doesn't handle MTU like ifconfig, but we can do it like so
+#ifup_eth0="ip link set \$int mtu 1500"
+
+# Create a bonded interface
+#interfaces="bond0"
+#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
+#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
+#ifdown_bond0="rmmod bonding"
+
+# Create tap interface and a bridge interface.
+# We add the tap to the bridge.
+# An external program, like dhcpcd, will configure the IP on the bridge
+#interfaces="tun0 br0"
+#ifup_tun0="tunctl -t \$int"
+#ifdown_tun0="tunctl -d \$int"
+#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
+#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
+
+# Create VLAN
+#interfaces="eth0_2 eth0_3 eth0_4"
+#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
+#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
+#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
+#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
+#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
+
+# Normally you would use wpa_supplicant to configure wireless, but you can
+# use iwconfig also
+#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.BSD.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"

conf.d/network.GNU-kFreeBSD.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"

conf.d/network.GNU.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"

conf.d/network.Linux.in

@@ -1,43 +0,0 @@
-
-# You can assign a default route
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"
-
-# ifconfig under Linux is not that powerful and doesn't easily handle
-# multiple addresses
-# On the other hand, ip (iproute2) is quite powerful and is also supported
-#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
-
-# You can also use ip to add the default route.
-#defaultiproute="via 192.168.0.1"
-#defaultiproute6="via 2001:a:b:c"
-
-# ip doesn't handle MTU like ifconfig, but we can do it like so
-#ifup_eth0="ip link set \$int mtu 1500"
-
-# Create a bonded interface
-#interfaces="bond0"
-#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
-#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
-#ifdown_bond0="rmmod bonding"
-
-# Create tap interface and a bridge interface.
-# We add the tap to the bridge.
-# An external program, like dhcpcd, will configure the IP on the bridge
-#interfaces="tun0 br0"
-#ifup_tun0="tunctl -t \$int"
-#ifdown_tun0="tunctl -d \$int"
-#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
-#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
-
-# Create VLAN
-#interfaces="eth0_2 eth0_3 eth0_4"
-#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
-#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
-#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
-#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
-#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
-
-# Normally you would use wpa_supplicant to configure wireless, but you can
-# use iwconfig also
-#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.in

@@ -1,28 +0,0 @@
-# Assign static IP addresses and run custom scripts per interface.
-# Seperate commands with ;
-# Prefix with ! to run a shell script.
-# Use \$int to represent the interface
-#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
-
-# You also have ifup_eth0 and ifdown_eth0 to run other commands when
-# eth0 is started and stopped.
-# You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set keep_network=NO
-
-# Lastly, the interfaces variable pulls in virtual interfaces that cannot
-# be automatically detected.
-#interfaces="br0 bond0 vlan0"
-
-# You can also use files instead of variables here if you like:
-# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
-# /etc/ip.eth0 is equivalent to ifconfig_eth0
-# /etc/ifup.eth0 is equivalent to ifup_eth0
-# /etc/ifdown.eth0 is equivalent to ifdown_eth0
-# Any files found will automatically be put into the interfaces variable.
-# You don't need to escape variables in files, so use $int instead of \$int.
-
-# If you require DHCP, you should install dhcpcd and it to the boot or
-# default runlevel.
-
-# NIS users can set the domain name here
-#domainname="foobar"

conf.d/staticroute

@@ -0,0 +1,26 @@
+# Static routes are defined differently depending on your operating
+# system, so please be sure to use the correct syntax.
+# Do not use this file to define the default route.
+# In all settings, multiple routes should be separated using ; or new lines.
+
+# Define static routes on Linux using route. See route(8) for syntax.
+#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
+#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
+
+# Define static routes on Linux using iproute2. See ip(8) for syntax.
+#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"
+
+# Define static routes on GNU/Hurd. See route(8) for syntax.
+# /etc/route.conf(5) takes precedence over this configuration.
+# FIXME: "net ..." not supported
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"
+
+# Define static routes on GNU/KFreeBSD. See route(8) for syntax.
+#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
+#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"
+
+# Define static routes on other BSD systems. See route(8) for syntax.
+# /etc/route.conf(5) takes precedence over this configuration.
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.BSD.in

@@ -1,6 +0,0 @@
-# Separate multiple routes using ; or new lines.
-# /etc/route.conf(5) takes precedence over this configuration.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.GNU-kFreeBSD.in

@@ -1,5 +0,0 @@
-# Separate multiple routes using ; or new lines.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
-#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"

conf.d/staticroute.GNU.in

@@ -1,7 +0,0 @@
-# Separate multiple routes using ; or new lines.
-# /etc/route.conf(5) takes precedence over this configuration.
-
-# Example static routes. See route(8) for syntax.
-# FIXME: "net ..." not supported
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"

conf.d/staticroute.Linux.in

@@ -1,8 +0,0 @@
-# Separate multiple routes using ; or new lines.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
-#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
-
-# Example static routes using iproute2. See ip(8) for syntax.
-#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

conf.d/swap

@@ -0,0 +1,13 @@
+# If you are only using local swap partitions, you should not change
+# this file. Otherwise, you need to uncomment the below rc_before line
+# followed by the appropriate rc_need line.
+#rc_before="!localmount"
+#
+# If you are using swap files stored on local file systems, uncomment
+# this line.
+#rc_need="localmount"
+#
+# If you are using swap files stored on network file systems or swap
+# partitions stored on network block devices such as iSCSI, uncomment
+# this line.
+#rc_need="netmount"

conf.d/tmpfiles

@@ -1,3 +0,0 @@
-# Extra options for tmpfiles.sh
-#tmpfiles_opts="--verbose"
-tmpfiles_opts=""

etc/.gitignore

@@ -1,3 +1,2 @@
-rc.conf
 rc
 rc.shutdown

etc/Makefile

@@ -1,10 +1,8 @@
 DIR=	${SYSCONFDIR}
-SRCS=	rc.conf.in rc.in rc.shutdown.in
+SRCS=	rc.in rc.shutdown.in
 BIN=	${BIN-${OS}}
 CONF=	rc.conf ${BIN-${OS}}
 
-CLEANFILES+=	rc.conf
-
 MK=	../mk
 include ${MK}/os.mk
 
@@ -23,6 +21,3 @@ CONF-NetBSD=
 SED_EXTRA=	${SED_EXTRA-${OS}}
 
 include ${MK}/scripts.mk
-
-rc.conf: rc.conf.in rc.conf.${OS}
-	${SED} ${SED_REPLACE} ${SED_EXTRA} $^ > $@

etc/rc.conf

@@ -0,0 +1,314 @@
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+#rc_shell=/bin/sh
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug controls which services we allow to be hotplugged.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# Hotplugged services appear in the "hotplugged" runlevel.
+# If rc_hotplug is set to any value, we compare the name of this service
+# to every pattern in the value, from left to right, and we allow the
+# service to be hotplugged if it matches a pattern, or if it matches no
+# patterns. Patterns can include shell wildcards.
+# To disable services from being hotplugged, prefix patterns with "!".
+#If rc_hotplug is not set or is empty, all hotplugging is disabled.
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be hotplugged.
+# Example - rc_hotplug="!net.*"
+# This allows services that do not match "net.*" to be hotplugged.
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+#rc_logger="NO"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
+
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+#unicode="NO"
+
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but  it can be adjusted here.
+#rc_fuser_timeout=60
+
+# Below is the default list of network fstypes.
+#
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#SSD_NICELEVEL="-19"
+# Or the ionice level. The format is class[:data] , just like the
+# --ionice start-stop-daemon parameter.
+#SSD_IONICELEVEL="2:2"
+
+# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which services do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+# This is the subsystem type.
+# It is used to match against keywords set by the keyword call in the
+# depend function of service scripts.
+#
+# It should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+# If it is commented out, automatic detection will be used.
+#
+# The list below shows all possible settings as well as the host
+# operating systems where they can be used and autodetected.
+#
+# ""               - nothing special
+# "docker"         - Docker container manager (Linux)
+# "jail"           - Jail (DragonflyBSD or FreeBSD)
+# "lxc"            - Linux Containers
+# "openvz"         - Linux OpenVZ
+# "prefix"         - Prefix
+# "rkt"            - CoreOS container management system (Linux)
+# "subhurd"        - Hurd subhurds (to be checked)
+# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
+# "uml"            - Usermode Linux
+# "vserver"        - Linux vserver
+# "xen0"           - Xen0 Domain (Linux and NetBSD)
+# "xenU"           - XenU Domain (Linux and NetBSD)
+#rc_sys=""
+
+# if  you use openrc-init, which is currently only available on Linux,
+# this is the default runlevel to activate after "sysinit" and "boot"
+# when booting.
+#rc_default_runlevel="default"
+
+# on Linux and Hurd, this is the number of ttys allocated for logins
+# It is used in the consolefont, keymaps, numlock and termencoding
+# service scripts.
+rc_tty_number=12
+
+##############################################################################
+# LINUX CGROUPS RESOURCE MANAGEMENT
+
+# This sets the mode used to mount cgroups.
+# "hybrid" mounts cgroups version 2 on /sys/fs/cgroup/unified and
+# cgroups version 1 on /sys/fs/cgroup.
+# "legacy" mounts cgroups version 1 on /sys/fs/cgroup
+# "unified" mounts cgroups version 2 on /sys/fs/cgroup
+#rc_cgroup_mode="hybrid"
+
+# This is a list of controllers which should be enabled for cgroups version 2.
+# If hybrid mode is being used, controllers listed here will not be
+# available for cgroups version 1.
+# This is a global setting.
+#rc_cgroup_controllers=""
+
+# This variable contains the cgroups version 2 settings for your services.
+# If this is set in this file, the settings will apply to all services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the setting and value followed by a newline.
+# Multiple settings and values can be specified.
+# For example, you would use this to set the maximum memory and maximum
+# number of pids for a service.
+#rc_cgroup_settings="
+#memory.max 10485760
+#pids.max max
+#"
+#
+# For more information about the adjustments that can be made with
+# cgroups version 2, see Documentation/cgroups-v2.txt in the linux kernel
+# source tree.
+#rc_cgroup_settings=""
+
+# This switch controls whether or not cgroups version 1 controllers are
+# individually mounted under
+# /sys/fs/cgroup in hybrid or legacy mode.
+#rc_controller_cgroups="YES"
+
+# The following setting turns on the memory.use_hierarchy setting in the
+# root memory cgroup for cgroups v1.
+# It must be set to yes in this file if you want this functionality.
+#rc_cggroup_memory_use_hierarchy="NO"
+
+# The following settings allow you to set up values for the cgroups version 1
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+# For more information about the adjustments that can be made with
+# cgroups version 1, see Documentation/cgroups-v1/* in the linux kernel
+# source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the hugetlb controller settings for this service.
+#rc_cgroup_hugetlb=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_cls controller settings for this service.
+#rc_cgroup_net_cls=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set the pids controller settings for this service.
+#rc_cgroup_pids=""
+
+# Set this to YES if you want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# Be aware that setting this to yes means all of a service's
+# child processes will be killed. Keep this in mind if you set this to
+# yes here instead of for the individual services in
+# /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# The process followed in this cleanup is the following:
+# 1. send stopsig (sigterm if it isn't set) to all processes left in the
+# cgroup immediately followed by sigcont.
+# 2. Send sighup to all processes in the cgroup if rc_send_sighup is
+# yes.
+# 3. delay for rc_timeout_stopsec seconds.
+# 4. send sigkill to all processes in the cgroup unless disabled by
+# setting rc_send_sigkill to no.
+# rc_cgroup_cleanup="NO"
+
+# If this is yes, we will send sighup to the processes in the cgroup
+# immediately after stopsig and sigcont.
+#rc_send_sighup="NO"
+
+# This is the amount of time in seconds that we delay after sending sigcont
+# and optionally sighup, before we optionally send sigkill to all
+# processes in the # cgroup.
+# The default is 90 seconds.
+#rc_timeout_stopsec="90"
+
+# If this is set to no, we do not send sigkill to all processes in the
+# cgroup.
+#rc_send_sigkill="YES"

etc/rc.conf.DragonFly

@@ -1,13 +0,0 @@
-##############################################################################
-# DragonFly BSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on DragonFly BSD:
-# ""        - nothing special
-# "jail"    - DragonFly BSD jails
-# "prefix"  - Prefix
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

etc/rc.conf.FreeBSD

@@ -1,13 +0,0 @@
-##############################################################################
-# FreeBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on FreeBSD:
-# ""        - nothing special
-# "jail"    - FreeBSD jails
-# "prefix"  - Prefix
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

etc/rc.conf.GNU

@@ -1,14 +0,0 @@
-##############################################################################
-# GNU/Hurd SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on GNU/Hurd:
-# ""        - nothing special
-# "subhurd" - Hurd subhurds (to be checked)
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-#rc_tty_number=6?

etc/rc.conf.GNU-kFreeBSD

@@ -1,11 +0,0 @@
-##############################################################################
-# GNU/kFreeBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on GNU/kFreeBSD:
-# ""        - nothing special
-# "jail"    - FreeBSD jails (not yet implemented)
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""

etc/rc.conf.Linux

@@ -1,90 +0,0 @@
-##############################################################################
-# LINUX SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on Linux:
-# ""               - nothing special
-# "docker"         - Docker container manager
-# "lxc"            - Linux Containers
-# "openvz"         - Linux OpenVZ
-# "prefix"         - Prefix
-# "rkt"            - CoreOS container management system
-# "uml"            - Usermode Linux
-# "vserver"        - Linux vserver
-# "systemd-nspawn" - Container created by the systemd-nspawn utility
-# "xen0"           - Xen0 Domain
-# "xenU"           - XenU Domain
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-rc_tty_number=12
-
-##############################################################################
-# CGROUPS RESOURCE MANAGEMENT
-
-# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controller is mounted under
-# /sys/fs/cgroup.
-# None of the other options in this section work if this is set to "NO".
-#rc_controller_cgroups="YES"
-
-# The following settings allow you to set up values for the cgroup
-# controllers for your services.
-# They can be set in this file;, however, if you do this, the settings
-# will apply to all of your services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the names of the settings followed by their
-# values. Each variable can hold multiple settings.
-# For example, you would use this to set the cpu.shares setting in the
-# cpu controller to 512 for your service.
-# rc_cgroup_cpu="
-# cpu.shares 512
-# "
-#
-#For more information about the adjustments that can be made with
-#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
-
-# Set the blkio controller settings for this service.
-#rc_cgroup_blkio=""
-
-# Set the cpu controller settings for this service.
-#rc_cgroup_cpu=""
-
-# Add this service to the cpuacct controller (any value means yes).
-#rc_cgroup_cpuacct=""
-
-# Set the cpuset controller settings for this service.
-#rc_cgroup_cpuset=""
-
-# Set the devices controller settings for this service.
-#rc_cgroup_devices=""
-
-# Set the hugetlb controller settings for this service.
-#rc_cgroup_hugetlb=""
-
-# Set the memory controller settings for this service.
-#rc_cgroup_memory=""
-
-# Set the net_cls controller settings for this service.
-#rc_cgroup_net_cls=""
-
-# Set the net_prio controller settings for this service.
-#rc_cgroup_net_prio=""
-
-# Set the pids controller settings for this service.
-#rc_cgroup_pids=""
-
-# Set this to YES if yu want all of the processes in a service's cgroup
-# killed when the service is stopped or restarted.
-# This should not be set globally because it kills all of the service's
-# child processes, and most of the time this is undesirable. Please set
-# it in /etc/conf.d/<service>.
-# To perform this cleanup manually for a stopped service, you can
-# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
-# rc-service <service> cgroup_cleanup.
-# rc_cgroup_cleanup="NO"

etc/rc.conf.NetBSD

@@ -1,14 +0,0 @@
-##############################################################################
-# NetBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on NetBSD:
-# ""        - nothing special
-# "prefix"  - Prefix
-# "xen0"    - Xen0 Domain
-# "xenU"    - XenU Domain
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

etc/rc.conf.in

@@ -1,151 +0,0 @@
-# Global OpenRC configuration settings
-
-# Set to "YES" if you want the rc system to try and start services
-# in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with its name as the output will get
-# jumbled up.
-# WARNING: whilst we have improved parallel, it can still potentially lock
-# the boot process. Don't file bugs about this unless you can supply
-# patches that fix it without breaking other things!
-#rc_parallel="NO"
-
-# Set rc_interactive to "YES" and you'll be able to press the I key during
-# boot so you can choose to start specific services. Set to "NO" to disable
-# this feature. This feature is automatically disabled if rc_parallel is
-# set to YES.
-#rc_interactive="YES"
-
-# If we need to drop to a shell, you can specify it here.
-# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
-# otherwise /bin/sh
-# Linux users could specify /sbin/sulogin
-#rc_shell=/bin/sh
-
-# Do we allow any started service in the runlevel to satisfy the dependency
-# or do we want all of them regardless of state? For example, if net.eth0
-# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
-# both will be started, but services that depend on 'net' will work if either
-# one comes up. With rc_depend_strict="YES" we would require them both to
-# come up.
-#rc_depend_strict="YES"
-
-# rc_hotplug controls which services we allow to be hotplugged.
-# A hotplugged service is one started by a dynamic dev manager when a matching
-# hardware device is found.
-# Hotplugged services appear in the "hotplugged" runlevel.
-# If rc_hotplug is set to any value, we compare the name of this service
-# to every pattern in the value, from left to right, and we allow the
-# service to be hotplugged if it matches a pattern, or if it matches no
-# patterns. Patterns can include shell wildcards.
-# To disable services from being hotplugged, prefix patterns with "!".
-#If rc_hotplug is not set or is empty, all hotplugging is disabled.
-# Example - rc_hotplug="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be hotplugged.
-# Example - rc_hotplug="!net.*"
-# This allows services that do not match "net.*" to be hotplugged.
-
-# rc_logger launches a logging daemon to log the entire rc process to
-# /var/log/rc.log
-# NOTE: Linux systems require the devfs service to be started before
-# logging can take place and as such cannot log the sysinit runlevel.
-#rc_logger="YES"
-
-# Through rc_log_path you can specify a custom log file.
-# The default value is: /var/log/rc.log
-#rc_log_path="/var/log/rc.log"
-
-# If you want verbose output for OpenRC, set this to yes. If you want
-# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
-#rc_verbose=no
-
-# By default we filter the environment for our running scripts. To allow other
-# variables through, add them here. Use a * to allow all variables through.
-#rc_env_allow="VAR1 VAR2"
-
-# By default we assume that all daemons will start correctly.
-# However, some do not - a classic example is that they fork and return 0 AND
-# then child barfs on a configuration error. Or the daemon has a bug and the
-# child crashes. You can set the number of milliseconds start-stop-daemon
-# waits to check that the daemon is still running after starting here.
-# The default is 0 - no checking.
-#rc_start_wait=100
-
-# rc_nostop is a list of services which will not stop when changing runlevels.
-# This still allows the service itself to be stopped when called directly.
-#rc_nostop=""
-
-# rc will attempt to start crashed services by default.
-# However, it will not stop them by default as that could bring down other
-# critical services.
-#rc_crashed_stop=NO
-#rc_crashed_start=YES
-
-# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
-# output.
-#rc_nocolor=NO
-
-##############################################################################
-# MISC CONFIGURATION VARIABLES
-# There variables are shared between many init scripts
-
-# Set unicode to YES to turn on unicode support for keyboards and screens.
-#unicode="NO"
-
-# This is how long fuser should wait for a remote server to respond. The
-# default is 60 seconds, but  it can be adjusted here.
-#rc_fuser_timeout=60
-
-# Below is the default list of network fstypes.
-#
-# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
-# nfs nfs4 ocfs2 shfs smbfs
-#
-# If you would like to add to this list, you can do so by adding your
-# own fstypes to the following variable.
-#extra_net_fs_list=""
-
-##############################################################################
-# SERVICE CONFIGURATION VARIABLES
-# These variables are documented here, but should be configured in
-# /etc/conf.d/foo for service foo and NOT enabled here unless you
-# really want them to work on a global basis.
-# If your service has characters in its name which are not legal in
-# shell variable names and you configure the variables for it in this
-# file, those characters should be replaced with underscores in the
-# variable names as shown below.
-
-# Some daemons are started and stopped via start-stop-daemon.
-# We can set some things on a per service basis, like the nicelevel.
-#SSD_NICELEVEL="-19"
-
-# Pass ulimit parameters
-# If you are using bash in POSIX mode for your shell, note that the
-# ulimit command uses a block size of 512 bytes for the -c and -f
-# options
-#rc_ulimit="-u 30"
-
-# It's possible to define extra dependencies for services like so
-#rc_config="/etc/foo"
-#rc_need="openvpn"
-#rc_use="net.eth0"
-#rc_after="clock"
-#rc_before="local"
-#rc_provide="!net"
-
-# You can also enable the above commands here for each service. Below is an
-# example for service foo.
-#rc_foo_config="/etc/foo"
-#rc_foo_need="openvpn"
-#rc_foo_after="clock"
-
-# Below is an example for service foo-bar. Note that the '-' is illegal
-# in a shell variable name, so we convert it to an underscore.
-# example for service foo-bar.
-#rc_foo_bar_config="/etc/foo-bar"
-#rc_foo_bar_need="openvpn"
-#rc_foo_bar_after="clock"
-
-# You can also remove dependencies.
-# This is mainly used for saying which servies do NOT provide net.
-#rc_net_tap0_provide="!net"
-

etc/rc.shutdown.in

@@ -14,7 +14,7 @@ trap : SIGINT SIGQUIT
 
 # Try and use stuff in /lib over anywhere else so we can shutdown
 # local mounts correctly.
-LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}" ; export LD_LIBRARY_PATH
+LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LD_LIBRARY_PATH}" ; export LD_LIBRARY_PATH
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)

init.d/.gitignore

@@ -1,4 +1,7 @@
+agetty
 binfmt
+cgroups
+modules-load
 bootmisc
 fsck
 hostname
@@ -11,7 +14,6 @@ network
 root
 savecache
 swap
-swapfiles
 sysctl
 urandom
 devfs
@@ -37,6 +39,7 @@ pf
 rarpd
 rc-enabled
 rpcbind
+runsvdir
 savecore
 swap-blk
 swclock
@@ -44,5 +47,3 @@ syslogd
 termencoding
 ttys
 wscons
-tmpfiles.dev
-tmpfiles.setup

init.d/Makefile

@@ -2,8 +2,8 @@ include ../mk/net.mk
 
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
-	netmount.in osclock.in root.in savecache.in swap.in swapfiles.in \
-	tmpfiles.setup.in swclock.in sysctl.in urandom.in s6-svscan.in ${SRCS-${OS}}
+	netmount.in osclock.in root.in savecache.in swap.in swclock.in \
+	sysctl.in runsvdir.in urandom.in s6-svscan.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
 # Are we installing our network scripts?
@@ -15,15 +15,16 @@ MK=	../mk
 include ${MK}/os.mk
 
 # Generic BSD scripts
-SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-		rpcbind.in savecore.in syslogd.in
+SRCS-FreeBSD=	hostid.in modules.in moused.in newsyslog.in pf.in rarpd.in \
+		rc-enabled.in rpcbind.in savecore.in syslogd.in
 # These are FreeBSD specific
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
 		mixer.in nscd.in powerd.in syscons.in
 
-SRCS-Linux=	binfmt.in devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
-		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
-		procfs.in net-online.in sysfs.in termencoding.in tmpfiles.dev.in
+SRCS-Linux=	agetty.in binfmt.in devfs.in cgroups.in dmesg.in hwclock.in \
+	consolefont.in keymaps.in killprocs.in modules.in \
+	mount-ro.in mtab.in numlock.in procfs.in net-online.in sysfs.in \
+termencoding.in
 
 # Generic BSD scripts
 SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
@@ -31,9 +32,6 @@ SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 # These are NetBSD specific
 SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
 
-%.in: %${SFX}
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@
-
 include ${MK}/scripts.mk
 
 _installafter_: realinstall

init.d/adjkerntz.in

@@ -23,6 +23,7 @@ fi
 
 depend()
 {
+	after swclock
 	provide clock
 	# BSD adjkerntz needs to be able to write to /etc
 	if [ "$clock" = "UTC" -a -e /etc/wall_cmos_clock ] ||

init.d/agetty.in

@@ -0,0 +1,39 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+description="start agetty on a terminal line"
+supervisor=supervise-daemon
+port="${RC_SVCNAME#*.}"
+term_type="${term_type:-linux}"
+command=/sbin/agetty
+command_args_foreground="${agetty_options} ${port} ${baud} ${term_type}"
+pidfile="/run/${RC_SVCNAME}.pid"
+
+depend() {
+	after local
+	keyword -prefix
+}
+
+start_pre() {
+	if [ -z "$port" ]; then
+		eerror "${RC_SVCNAME} cannot be started directly. You must create"
+		eerror "symbolic links to it for the ports you want to start"
+		eerror "agetty on and add those to the appropriate runlevels."
+		return 1
+	else
+		export EINFO_QUIET="${quiet:-yes}"
+	fi
+}
+
+stop_pre()
+{
+	export EINFO_QUIET="${quiet:-yes}"
+}

init.d/binfmt.in

@@ -13,9 +13,9 @@ description="Register misc binary format handlers"
 
 depend()
 {
-	after procfs
+	after clock procfs
 	use modules devfs
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/bootmisc.in

@@ -71,7 +71,8 @@ cleanup_var_run_dir()
 	ebegin "Cleaning /var/run"
 	for x in $(find /var/run ! -type d ! -name utmp \
 		! -name random-seed ! -name dev.db \
-		! -name ld-elf.so.hints ! -name ld.so.hints);
+		! -name ld-elf.so.hints ! -name ld-elf32.so.hints \
+		! -name ld.so.hints);
 	do
 		# Clean stale sockets
 		if [ -S "$x" ]; then
@@ -240,7 +241,7 @@ stop()
 {
 	# Write a halt record if we're shutting down
 	if [ "$RC_RUNLEVEL" = shutdown ]; then
-		[ "$RC_UNAME" = Linux ] && halt -w
+		[ "$RC_UNAME" = Linux ] && openrc-shutdown -w
 		if [ "$RC_SYS" = OPENVZ ]; then
 			yesno $RC_REBOOT && printf "" >/reboot
 		fi

init.d/cgroups.in

@@ -0,0 +1,149 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+description="Mount the control groups."
+
+cgroup_opts=nodev,noexec,nosuid
+
+depend()
+{
+	keyword -docker -prefix -systemd-nspawn -vserver
+	after sysfs
+}
+
+cgroup1_base()
+{
+	grep -qw cgroup /proc/filesystems || return 0
+	if ! mountinfo -q /sys/fs/cgroup; then
+		ebegin "Mounting cgroup filesystem"
+		local opts="${cgroup_opts},mode=755,size=${rc_cgroupsize:-10m}"
+		mount -n -t tmpfs -o "${opts}" cgroup_root /sys/fs/cgroup
+		eend $?
+	fi
+
+	if ! mountinfo -q /sys/fs/cgroup/openrc; then
+		local agent="${RC_LIBEXECDIR}/sh/cgroup-release-agent.sh"
+		mkdir /sys/fs/cgroup/openrc
+		mount -n -t cgroup \
+			-o none,${cgroup_opts},name=openrc,release_agent="$agent" \
+			openrc /sys/fs/cgroup/openrc
+		printf 1 > /sys/fs/cgroup/openrc/notify_on_release
+	fi
+	return 0
+}
+
+cgroup1_controllers()
+{
+	yesno "${rc_controller_cgroups:-YES}" && [ -e /proc/cgroups ]  &&
+	grep -qw cgroup /proc/filesystems || return 0
+	while read -r name _ _ enabled _; do
+		case "${enabled}" in
+			1)	mountinfo -q "/sys/fs/cgroup/${name}" && continue
+				local x
+				for x in $rc_cgroup_controllers; do
+				[ "${name}" = "blkio" ] && [ "${x}" = "io" ] &&
+					continue 2
+				[ "${name}" = "${x}" ] &&
+				continue 2
+				done
+				mkdir "/sys/fs/cgroup/${name}"
+				mount -n -t cgroup -o "${cgroup_opts},${name}" \
+					"${name}" "/sys/fs/cgroup/${name}"
+				yesno "${rc_cgroup_memory_use_hierarchy:-no}" &&
+					[ "${name}" = memory ] &&
+					echo 1 > /sys/fs/cgroup/memory/memory.use_hierarchy
+				;;
+		esac
+	done < /proc/cgroups
+	return 0
+}
+
+cgroup2_base()
+{
+	grep -qw cgroup2 /proc/filesystems || return 0
+	local base
+	base="$(cgroup2_find_path)"
+	mkdir -p "${base}"
+	mount -t cgroup2 none -o "${cgroup_opts},nsdelegate" "${base}" 2> /dev/null ||
+		mount -t cgroup2 none -o "${cgroup_opts}" "${base}"
+	return 0
+}
+
+cgroup2_controllers()
+{
+	grep -qw cgroup2 /proc/filesystems || return 0
+	local active cgroup_path x y
+	cgroup_path="$(cgroup2_find_path)"
+	[ -z "${cgroup_path}" ] && return 0
+	[ -e "${cgroup_path}/cgroup.controllers" ] &&
+	read -r active < "${cgroup_path}/cgroup.controllers"
+	for x in ${rc_cgroup_controllers}; do
+		for y in ${active}; do
+		[ "$x" = "$y" ] &&
+			[ -e "${cgroup_path}/cgroup.subtree_control" ]&&
+			echo "+${x}"  > "${cgroup_path}/cgroup.subtree_control"
+		done
+	done
+	return 0
+}
+
+cgroups_hybrid()
+{
+	cgroup1_base
+	cgroup2_base
+	cgroup2_controllers
+	cgroup1_controllers
+	return 0
+}
+
+cgroups_legacy()
+{
+	cgroup1_base
+	cgroup1_controllers
+	return 0
+}
+
+cgroups_unified()
+{
+	cgroup2_base
+	cgroup2_controllers
+	return 0
+}
+
+mount_cgroups()
+{
+	case "${rc_cgroup_mode:-hybrid}" in
+	hybrid) cgroups_hybrid ;;
+	legacy) cgroups_legacy ;;
+	unified) cgroups_unified ;;
+	esac
+	return 0
+}
+
+restorecon_cgroups()
+{
+	if [ -x /sbin/restorecon ]; then
+		ebegin "Restoring SELinux contexts in /sys/fs/cgroup"
+		restorecon -rF /sys/fs/cgroup >/dev/null 2>&1
+		eend $?
+	fi
+	return 0
+}
+
+start()
+{
+	# set up kernel support for cgroups
+	if [ -d /sys/fs/cgroup ]; then
+		mount_cgroups
+		restorecon_cgroups
+	fi
+	return 0
+}

init.d/consolefont.in

@@ -13,9 +13,9 @@ description="Sets a font for the consoles."
 
 depend()
 {
-	need localmount termencoding
+	need termencoding
 	after hotplug bootmisc modules
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 start()

init.d/devdb.in

@@ -13,6 +13,7 @@ description="Creates the dev database"
 
 depend()
 {
+	after clock
 	need localmount
 }
 

init.d/devfs.in

@@ -15,14 +15,17 @@ depend()
 {
 	provide dev-mount
 	before dev
-	keyword -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 mount_dev()
 {
-	local action=--mount devfstype msg=Mounting
+	local action conf_d_dir devfstype msg mountopts
+	action=--mount
+	conf_d_dir="${RC_SERVICE%/*/*}/conf.d"
+	msg=Mounting
 	# Some devices require exec, Bug #92921
-	local mountopts="exec,nosuid,mode=0755"
+	mountopts="exec,nosuid,mode=0755"
 	if yesno ${skip_mount_dev:-no} ; then
 		einfo "/dev will not be mounted due to user request"
 		return 0
@@ -33,7 +36,7 @@ mount_dev()
 		msg=Remounting
 	fi
 	if fstabinfo -q /dev; then
-		ebegin "$msg /dev according to @SYSCONFDIR@/fstab"
+		ebegin "$msg /dev according to fstab"
 		fstabinfo -q $action /dev
 		eend $?
 		return 0
@@ -54,7 +57,7 @@ mount_dev()
 		ewarn "is no entry for /dev in fstab."
 		ewarn "This means /dev will not be mounted."
 		ewarn "To avoid this message, set CONFIG_DEVTMPFS or CONFIG_TMPFS to y"
-		ewarn "in your kernel configuration or see @SYSCONFDIR@/conf.d/devfs"
+		ewarn "in your kernel configuration or see ${conf_d_dir}/${RC_SVCNAME}"
 	fi
 	return 0
 }

init.d/dmesg.in

@@ -14,7 +14,7 @@ description="Set the dmesg level for a cleaner boot"
 depend()
 {
 	before dev modules
-	keyword -lxc -prefix -systemd-nspawn -vserver
+	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/dumpon.in

@@ -12,6 +12,7 @@
 description="Configures a specific kernel dump device."
 
 depend() {
+	after clock
 	need swap
 	keyword -jail -prefix
 }

init.d/fsck.in

@@ -15,8 +15,9 @@ _IFS="
 
 depend()
 {
+	after clock
 	use dev clock modules
-	keyword -jail -openvz -prefix -systemd-nspawn -timeout -vserver -lxc -uml
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -timeout -vserver -uml
 }
 
 _abort() {

init.d/hostid.in

@@ -15,6 +15,7 @@ extra_commands="reset"
 depend()
 {
 	use root
+	after clock
 	before devd net
 	keyword -jail -prefix
 }

init.d/hostname.in

@@ -11,16 +11,28 @@
 
 description="Sets the hostname of the machine."
 
-depend() {
-	keyword -prefix -systemd-nspawn -lxc
+depend()
+{
+	after clock
+	keyword -docker -lxc -prefix -systemd-nspawn
 }
 
 start()
 {
-	# HOSTNAME variable used to be defined in caps in conf.d/hostname.
-	# It is also a magic variable in bash.
-	hostname=${hostname-${HOSTNAME-localhost}} # checkbashisms: false positive
-	ebegin "Setting hostname to $hostname"
-	hostname "$hostname"
+	local h source x
+	if [ -s /etc/hostname ] && [ -r /etc/hostname ]; then
+		read h x </etc/hostname
+		source="from /etc/hostname"
+	else
+		# HOSTNAME variable used to be defined in caps in conf.d/hostname.
+		# It is also a magic variable in bash.
+		h=${hostname:-${HOSTNAME}} # checkbashisms: false positive (HOSTNAME var)
+	fi
+	if [ -z "$h" ]; then
+		einfo "Using default system hostname"
+		return 0
+	fi
+	ebegin "Setting hostname to $h $source"
+	hostname "$h"
 	eend $? "Failed to set the hostname"
 }

init.d/hwclock.in

@@ -30,12 +30,11 @@ fi
 depend()
 {
 	provide clock
+	want modules
 	if yesno $clock_adjfile; then
 		use root
-	else
-		before *
 	fi
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 setupopts()
@@ -69,9 +68,28 @@ _hwclock()
 	return 1
 }
 
+get_noadjfile()
+{
+	if ! yesno $clock_adjfile; then
+		# Some implementations don't handle adjustments
+		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
+			echo --noadjfile
+		fi
+	fi
+}
+
+rtc_exists()
+{
+	local rtc=
+	for rtc in /dev/rtc /dev/rtc[0-9]*; do
+		[ -e "$rtc" ] && break
+	done
+	[ -e "$rtc" ]
+}
+
 start()
 {
-	local retval=0 errstr=""
+	local retval=0 errstr="" modname
 	setupopts
 
 	if [ -z "$utc_cmd" ]; then
@@ -81,26 +99,27 @@ start()
 
 	ebegin "Setting system clock using the hardware clock [$utc]"
 	if [ -e /proc/modules ]; then
-		local rtc=
-		for rtc in /dev/rtc /dev/rtc[0-9]*; do
-			[ -e "$rtc" ] && break
-		done
-		if [ ! -e "${rtc}" ]; then
-			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
+		if ! rtc_exists; then
+			for x in rtc-cmos rtc genrtc; do
+				modprobe -q $x && rtc_exists && modname="$x" && break
+			done
+			[ -n "$modname" ] &&
+				ewarn "The $modname module needs to be configured in" \
+					"${RC_SERVICE%/*/*}/conf.d/modules or built in."
 		fi
 	fi
 
 	# Always set the kernel's time zone.
-	_hwclock --systz $utc_cmd $clock_args
+	_hwclock --systz $utc_cmd $(get_noadjfile) $clock_args
 	: $(( retval += $? ))
 
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
-		_hwclock --adjust $utc_cmd
+		_hwclock --adjust $utc_cmd $(get_noadjfile)
 		: $(( retval += $? ))
 	fi
 
 	if yesno ${clock_hctosys:-YES}; then
-		_hwclock --hctosys $utc_cmd $clock_args
+		_hwclock --hctosys $utc_cmd $(get_noadjfile) $clock_args
 		: $(( retval += $? ))
 	fi
 
@@ -122,14 +141,7 @@ stop()
 
 	ebegin "Setting hardware clock using the system clock" "[$utc]"
 
-	if ! yesno $clock_adjfile; then
-		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
-			utc_cmd="$utc_cmd --noadjfile"
-		fi
-	fi
-
-	_hwclock --systohc $utc_cmd $clock_args
+	_hwclock --systohc $utc_cmd $(get_noadjfile) $clock_args
 	retval=$?
 
 	eend $retval "Failed to sync clocks"
@@ -144,5 +156,5 @@ save()
 show()
 {
 	setupopts
-	hwclock --show "$utc_cmd" $clock_args
+	hwclock --show "$utc_cmd" $(get_noadjfile) $clock_args
 }

init.d/keymaps.in

@@ -13,9 +13,9 @@ description="Applies a keymap for the consoles."
 
 depend()
 {
-	need localmount termencoding
-	after bootmisc
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	need termencoding
+	after bootmisc clock
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 start()

init.d/killprocs.in

@@ -19,11 +19,9 @@ depend()
 start()
 {
 	ebegin "Terminating remaining processes"
-	killall5 -15 ${killall5_opts}
-	sleep 1
+	kill_all 15 ${killall5_opts}
 	eend 0
 	ebegin "Killing remaining processes"
-	killall5 -9 ${killall5_opts}
-	sleep 1
+	kill_all 9 ${killall5_opts}
 	eend 0
 }

init.d/local.in

@@ -9,7 +9,10 @@
 # This file may not be copied, modified, propagated, or distributed
 # except according to the terms contained in the LICENSE file.
 
-description="Executes user programs in @SYSCONFDIR@/local.d"
+conf_d_dir="${RC_SERVICE%/*/*}/conf.d"
+local_d_dir="${RC_SERVICE%/*/*}/local.d"
+
+description="Executes user programs in ${local_d_dir}"
 
 depend()
 {
@@ -19,12 +22,12 @@ depend()
 
 start()
 {
-	ebegin "Starting local"
-
-	local file has_errors=0 redirect retval
+	local file has_errors redirect retval
+	has_errors=0
 	yesno $rc_verbose || redirect='> /dev/null 2>&1'
+	ebegin "Starting local"
 	eindent
-	for file in @SYSCONFDIR@/local.d/*.start; do
+	for file in "${local_d_dir}"/*.start; do
 		if [ -x "${file}" ]; then
 			vebegin "Executing \"${file}\""
 			eval "${file}" $redirect
@@ -38,32 +41,32 @@ start()
 	eoutdent
 
 	if command -v local_start >/dev/null 2>&1; then
-		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
+		ewarn "\"${conf_d_dir}/local\" should be removed."
 		ewarn "Please move the code from the local_start function"
 		ewarn "to executable scripts with an .start extension"
-		ewarn "in \"@SYSCONFDIR@/local.d\""
+		ewarn "in \"${local_d_dir}\""
 		local_start
 	fi
 
 	eend ${has_errors}
 
 	# We have to end with a zero exit code, because a failed execution
-	# of an executable @SYSCONFDIR@/local.d/*.start file shouldn't result in
+	# of an executable ${local_d_dir}/*.start file shouldn't result in
 	# marking the local service as failed. Otherwise we are unable to
-	# execute any executable @SYSCONFDIR@/local.d/*.stop file, because a failed
+	# execute any executable ${local_d_dir}/*.stop file, because a failed
 	# marked service cannot be stopped (and the stop function would
-	# actually call the executable @SYSCONFDIR@/local.d/*.stop file(s)).
+	# actually call the executable ${local_d_dir}/*.stop file(s)).
 	return 0
 }
 
 stop()
 {
-	ebegin "Stopping local"
-
-	local file has_errors=0 redirect retval
+	local file has_errors redirect retval
+	has_errors=0
 	yesno $rc_verbose || redirect='> /dev/null 2>&1'
+	ebegin "Stopping local"
 	eindent
-	for file in @SYSCONFDIR@/local.d/*.stop; do
+	for file in "${local_d_dir}"/*.stop; do
 		if [ -x "${file}" ]; then
 			vebegin "Executing \"${file}\""
 			eval "${file}" $redirect
@@ -77,16 +80,16 @@ stop()
 	eoutdent
 
 	if command -v local_stop >/dev/null 2>&1; then
-		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
+		ewarn "\"${conf_d_dir}/local\" should be removed."
 		ewarn "Please move the code from the local_stop function"
 		ewarn "to executable scripts with an .stop extension"
-		ewarn "in \"@SYSCONFDIR@/local.d\""
+		ewarn "in \"${local_d_dir}\""
 		local_stop
 	fi
 
 	eend ${has_errors}
 
-	# An executable @SYSCONFDIR@/local.d/*.stop file which failed with a
+	# An executable ${local_d_dir}/*.stop file which failed with a
 	# non-zero exit status is not a reason to mark this service
 	# as failed, therefore we have to end with a zero exit code.
 	return 0

init.d/localmount.in

@@ -14,17 +14,18 @@ description="Mounts disks and swap according to /etc/fstab."
 depend()
 {
 	need fsck
-	use lvm modules mtab
-	after lvm modules
-	keyword -jail -prefix -systemd-nspawn -vserver -lxc
+	use lvm modules root
+	after clock lvm modules root
+	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local types="noproc" x= no_netdev= rc=
+	# The types variable must start with no, and must be a type
+	local critical= types="noproc" x= no_netdev= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
-		types="${types},no${x}"
+		types="${types},${x}"
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
@@ -37,13 +38,17 @@ start()
 	mount -at "$types" $no_netdev
 	eend $? "Some local filesystem failed to mount"
 	rc=$?
-	if [ "$RC_UNAME" != Linux ]; then
+	if [ -z "$critical_mounts" ]; then
 		rc=0
-	elif yesno "${ignore_mount_errors:-NO}"; then
-		if [ $rc -ne 0 ]; then
-			ewarn "localmount: errors detected, but ignored"
+	else
+		for x in ${critical_mounts}; do
+		fstabinfo -q $x || continue
+		if ! mountinfo -q $x; then
+			critical=x
+			eerror "Failed to mount $x"
 		fi
-		rc=0
+		done
+		[ -z "$critical" ] && rc=0
 	fi
 	return $rc
 }
@@ -95,8 +100,8 @@ stop()
 				aufs_branch=$(sed 's/=.*//g' $x)
 				eindent
 				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
-					ewarn "Failed to remove branch $aufs_branch from aufs \
-					$aufs_mount_point"
+					ewarn "Failed to remove branch $aufs_branch from aufs" \
+					"$aufs_mount_point"
 				fi
 				eoutdent
 				sync

init.d/loopback.in

@@ -13,6 +13,7 @@ description="Configures the loopback interface."
 
 depend()
 {
+	after clock
 	keyword -jail -prefix -systemd-nspawn -vserver
 }
 
@@ -21,22 +22,14 @@ start()
 	if [ "$RC_UNAME" = Linux ]; then
 		ebegin "Bringing up network interface lo"
 		if command -v ip > /dev/null 2>&1; then
-			ip addr add 127.0.0.1/8 dev lo brd + scope host
-			ip route add 127.0.0.0/8 dev lo scope host
+			ip addr add 127.0.0.1/8 dev lo brd +
 			ip link set lo up
 		else
 			ifconfig lo 127.0.0.1 netmask 255.0.0.0
-			route add -net 127.0.0.0 netmask 255.0.0.0 gw 127.0.0.1
 		fi
 	else
 		ebegin "Bringing up network interface lo0"
 		ifconfig lo0 127.0.0.1 netmask 255.0.0.0
-		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 127.0.0.1
 	fi
 	eend $?
 }
-
-stop()
-{
-	return 0
-}

init.d/modules.in

@@ -14,12 +14,79 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	provide modules-load
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
-start()
+find_modfiles()
 {
-	# Should not fail if kernel do not have module
+	local dirs="/usr/lib/modules-load.d /run/modules-load.d /etc/modules-load.d"
+	local basenames files fn x y
+	for x in $dirs; do
+		[ ! -d $x ] && continue
+		for y in $x/*.conf; do
+			[ -f $y ] && basenames="${basenames}\n${y##*/}"
+		done
+	done
+	basenames=$(printf "$basenames" | sort -u)
+	for x in $basenames; do
+		for y in $dirs; do
+			[ -r $y/$x ] &&
+				fn=$y/$x
+		done
+		files="$files $fn"
+	done
+	echo $files
+}
+
+load_modules()
+{
+	local file m modules rc x
+	file=$1
+	[ -z "$file" ] && return 0
+	while read m x; do
+		case $m in
+			\;*) continue ;;
+			\#*) continue ;;
+			*) modules="$modules $m"
+			;;
+		esac
+	done < $file
+	for x in $modules; do
+		ebegin "Loading module $x"
+		case "$RC_UNAME" in
+			FreeBSD) kldload "$x"; rc=$? ;;
+			Linux) modprobe --use-blacklist -q "$x"; rc=$? ;;
+			*) ;;
+		esac
+		eend $rc "Failed to load $x"
+	done
+}
+
+modules_load_d()
+{
+	local x
+	files=$(find_modfiles)
+	for x in $files; do
+		load_modules $x
+	done
+	return 0
+}
+
+FreeBSD_modules()
+{
+	local cnt=0 x
+	for x in $modules; do
+		ebegin "Loading module $x"
+		kldload "$x"
+		eend $? "Failed to load $x" && : $(( cnt += 1 ))
+	done
+	einfo "Autoloaded $cnt module(s)"
+}
+
+Linux_modules()
+{
+	# Should not fail if kernel does not have module
 	# support compiled in ...
 	[ ! -f /proc/modules ] && return 0
 
@@ -36,22 +103,21 @@ start()
 		x=${x%.*}
 	done
 
-	local list= x= xx= y= args= mpargs= cnt=0 a=
+	local list= x= xx= y= args= mpargs= a=
 	for x in $kv_variant_list ; do
 		eval list=\$modules_$(shell_var "$x")
 		[ -n "$list" ] && break
 	done
 	[ -z "$list" ] && list=$modules
 
+	[ -n "$list" ] && ebegin "Loading kernel modules"
 	for x in $list; do
 		a=${x#*:}
 		if [ "$a" = "$x" ]; then
 			unset mpargs
-			ebegin "Loading module $x"
 		else
 			x=${x%%:*}
 			mpargs="-o $a"
-			ebegin "Loading module $x as $a"
 		fi
 		aa=$(shell_var "$a")
 		xx=$(shell_var "$x")
@@ -63,8 +129,19 @@ start()
 		done
 		[ -z "$args" ] && eval args=\$module_${aa}_args
 		[ -z "$args" ] && eval args=\$module_${xx}_args
-		eval modprobe -q "$mpargs" "$x" "$args"
-		eend $? "Failed to load $x" && : $(( cnt += 1 ))
+		eval modprobe --use-blacklist --verbose "$mpargs" "$x" "$args"
 	done
-	einfo "Autoloaded $cnt module(s)"
+	[ -n "$list" ] && eend
+}
+
+start()
+{
+	case "$RC_UNAME" in
+		FreeBSD|Linux) 
+			modules_load_d
+			${RC_UNAME}_modules
+			;;
+		*) ;;
+	esac
+	return 0
 }

init.d/mount-ro.in

@@ -13,8 +13,8 @@ description="Re-mount filesytems read-only for a clean reboot."
 
 depend()
 {
-	need killprocs savecache
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	after killprocs savecache
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()
@@ -34,6 +34,9 @@ start()
 
 	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
 	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
+	if [ -e "$rc_svcdir"/usr_premounted ]; then
+		m="$m|/usr"
+	fi
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
 	local IFS="$IFS:"
 	for x in $no_umounts $RC_NO_UMOUNTS; do

init.d/mtab.in

@@ -13,6 +13,8 @@ description="Update /etc/mtab to match what the kernel knows about"
 
 depend()
 {
+	after clock
+	before localmount
 	need root
 	keyword -prefix -systemd-nspawn
 }
@@ -29,6 +31,10 @@ start()
 		einfo "Creating mtab symbolic link"
 		ln -snf /proc/self/mounts /etc/mtab
 	else
+		ewarn "The ${RC_SVCNAME} service will be removed in the future."
+		ewarn "Please change the mtab_is_file setting to no and run"
+		ewarn "# rc-service mtab restart"
+		ewarn "to create the mtab symbolic link."
 		[ -L /etc/mtab ] && ewarn "Removing /etc/mtab symbolic link"
 		rm -f /etc/mtab
 		einfo "Creating mtab file"

init.d/net-online.in

@@ -13,37 +13,26 @@ description="Delays until the network is online or a specific timeout"
 
 depend()
 {
-	after modules
+	after modules net
 	need sysfs
-	keyword -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
+	provide network-online
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
 }
 
 get_interfaces()
 {
 	local ifname iftype
 	for ifname in /sys/class/net/*; do
+		[ -h "${ifname}" ] && continue
 		read iftype < ${ifname}/type
 		[ "$iftype" = "1" ] && printf "%s " ${ifname##*/}
 	done
 }
 
-get_default_gateway()
-{
-	local cmd gateway
-	if command -v ip > /dev/null 2>&1; then
-		cmd="ip route show"
-	else
-		cmd=route
-	fi
-	set -- $($cmd | grep default)
-	[ "$2" != via ] && gateway="$2" || gateway="$3"
-	printf "%s" $gateway
-}
-
 start ()
 {
-	local carriers configured dev gateway ifcount infinite interfaces
-	local rc state timeout x
+	local carriers configured dev gateway ifcount infinite
+	local carrier operstate rc
 
 	ebegin "Checking to see if the network is online"
 	rc=0
@@ -56,20 +45,31 @@ start ()
 	ifcount=0
  	for dev in ${interfaces}; do
 		: $((ifcount += 1))
-		read x < /sys/class/net/$dev/carrier
-		[ $x -eq 1 ] && : $((carriers += 1))
-		read x < /sys/class/net/$dev/operstate
-		[ "$x" = up ] && : $((configured += 1))
+		read carrier < /sys/class/net/$dev/carrier 2> /dev/null ||
+			carrier=
+		[ "$carrier" = 1 ] && : $((carriers += 1))
+		read operstate < /sys/class/net/$dev/operstate 2> /dev/null ||
+			operstate=
+		[ "$operstate" = up ] && : $((configured += 1))
 	done
 	[ $configured -eq $ifcount ] && [ $carriers -ge 1 ] && break
 	sleep 1
 	: $((timeout -= 1))
  done
  ! $infinite && [ $timeout -eq 0 ] && rc=1
- if [ $rc -eq 0 ] && yesno ${ping_default_gateway:-no}; then
- 	gateway="$(get_default_gateway)"
- 	if [ -n "$gateway" ] && ! ping -c 1 $gateway > /dev/null 2>&1; then
-		rc=1
+ include_ping_test=${include_ping_test:-${ping_default_gateway}}
+ if [ -n "${ping_default_gateway}" ]; then
+ ewarn "ping_default_gateway is deprecated, please use include_ping_test"
+ fi
+ if [ $rc -eq 0 ] && yesno ${include_ping_test:-no}; then
+ 	ping_test_host="${ping_test_host:-google.com}"
+ 	if [ -n "$ping_test_host" ]; then
+		while $infinite || [ $timeout -gt 0 ]; do
+			ping -c 1 $ping_test_host > /dev/null 2>&1
+			rc=$?
+			[ $rc -eq 0 ] && break
+			: $((timeout -= 1))
+		done
 	fi
  fi
  eend $rc "The network is offline"

init.d/netmount.in

@@ -20,11 +20,13 @@ depend()
 			*) mywant="$mywant nfsclient"; break ;;
 		esac
 	done
+	after root
  	config /etc/fstab
 	want $mywant
 	use afc-client amd openvpn
 	use dns
-	keyword -jail -prefix -systemd-nspawn -vserver -lxc
+	use root
+	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()
@@ -37,13 +39,22 @@ start()
 	ebegin "Mounting network filesystems"
 	mount -at $fs
 	rc=$?
-	if [ "$RC_UNAME" = Linux ]; then
+	if [ "$RC_UNAME" = Linux ] && [ $rc = 0 ]; then
 		mount -a -O _netdev
 		rc=$?
 	fi
 	ewend $rc "Could not mount all network filesystems"
-	if [ "$RC_UNAME" != Linux ]; then
+	if [ -z "$critical_mounts" ]; then
 		rc=0
+	else
+		for x in ${critical_mounts}; do
+		fstabinfo -q $x || continue
+		if ! mountinfo -q $x; then
+			critical=x
+			eerror "Failed to mount $x"
+		fi
+		done
+		[ -z "$critical" ] && rc=0
 	fi
 	return $rc
 }
@@ -72,7 +83,7 @@ stop()
 	retval=$?
 
 	eoutdent
-	if [ "$RC_UNAME" = Linux ]; then
+	if [ "$RC_UNAME" = Linux ] && [ $retval = 0 ]; then
 		umount -a -O _netdev
 		retval=$?
 	fi

init.d/network.in

@@ -18,7 +18,7 @@ __nl="
 depend()
 {
 	need localmount
-	after bootmisc
+	after bootmisc clock
 	if [ -n "$(interfaces)" ]; then
 		provide net
 	fi
@@ -76,7 +76,7 @@ tentative()
 
 	case "$RC_UNAME" in
 	Linux)
-		[ -x /sbin/ip ] || [ -x /bin/ip ] || return 1
+		[ -n "$(command -v ip)" ] || return 1
 		[ -n "$(ip -f inet6 addr show tentative)" ]
 		;;
 	*)
@@ -174,7 +174,7 @@ runip()
 routeflush()
 {
 	if [ "$RC_UNAME" = Linux ]; then
-		if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
+		if [ -n "$(command -v ip)"  ]; then
 			ip route flush scope global
 			ip route delete default 2>/dev/null
 		else
@@ -346,7 +346,7 @@ stop()
 		then
 			veinfo "$int"
 			runargs /etc/ifdown."$int" "$downcmd"
-			if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
+			if [ -n "$(command -v ip)" ]; then
 				# We need to do this, otherwise we may
 				# fail to add things correctly on restart
 				ip address flush dev "$int" 2>/dev/null

init.d/newsyslog.in

@@ -13,6 +13,7 @@ required_files="/etc/newsyslog.conf"
 
 depend()
 {
+	after clock
 	need localmount
 	keyword -prefix
 }

init.d/numlock.in

@@ -15,8 +15,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
-	need localmount
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 _setleds()

init.d/procfs.in

@@ -13,16 +13,22 @@ description="Mounts misc filesystems in /proc."
 
 depend()
 {
-	use modules devfs
-	need localmount
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	after clock
+	use devfs
+	want modules
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	# Setup Kernel Support for miscellaneous Binary Formats
-	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
-		modprobe -q binfmt-misc
+	if [ -d /proc/sys/fs/binfmt_misc ] &&
+		[ ! -e /proc/sys/fs/binfmt_misc/register ]; then
+		if ! grep -qs binfmt_misc /proc/filesystems &&
+			modprobe -q binfmt-misc; then
+			ewarn "The binfmt-misc module needs to be loaded by" \
+				"the modules service or built in."
+		fi
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \

init.d/root.in

@@ -13,8 +13,9 @@ description="Mount the root fs read/write"
 
 depend()
 {
+	after clock
 	need fsck
-	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/runsvdir.in

@@ -0,0 +1,20 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2016 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+command=/usr/bin/runsvdir
+command_background=yes
+pidfile=/var/run/runsvdir.pid
+command_args="-P $RC_SVCDIR/sv 'log: ...........................................................................................................................................................................................................................................................................................................................................................................................................'"
+
+start_pre()
+{
+	checkpath -m 0755 -o root:root -d ${RC_SVCDIR}/sv
+}

init.d/savecache.in

@@ -49,7 +49,7 @@ start()
 	fi
 	ebegin "Saving dependency cache"
 	local rc=0 save=
-	for x in deptree depconfig shutdowntime softlevel nettree rc.log; do
+	for x in depconfig deptree rc.log shutdowntime softlevel; do
 		[ -e "$RC_SVCDIR/$x" ] && save="$save $RC_SVCDIR/$x"
 	done
 	if [ -n "$save" ]; then

init.d/savecore.in

@@ -14,6 +14,7 @@ description="Saves a kernel dump."
 depend()
 {
 	need dumpon localmount
+	after clock
 	before encswap
 	keyword -jail -prefix
 }

init.d/staticroute.in

@@ -14,9 +14,9 @@
 description="Configures static routes."
 __nl="
 "
-
 depend()
 {
+	after clock
 	provide net
 	use network
 	keyword -jail -prefix -vserver

init.d/swap-blk.in

@@ -11,6 +11,7 @@
 
 depend()
 {
+	after clock
 	before fsck
 	keyword -jail -prefix
 }

init.d/swap.in

@@ -11,15 +11,15 @@
 
 depend()
 {
+	after clock root
 	before localmount
-	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	ebegin "Activating swap devices"
 	case "$RC_UNAME" in
-		Linux)		swapon -a -e >/dev/null;;
 		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
 		*)		swapon -a >/dev/null;;
 	esac
@@ -29,12 +29,6 @@ start()
 stop()
 {
 	ebegin "Deactivating swap devices"
-
-	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
-	# occur. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
-	cd "$RC_SVCDIR"
-	umount -a -t tmpfs 2>/dev/null
-
 	case "$RC_UNAME" in
 		NetBSD|OpenBSD)	swapctl -U -t noblk >/dev/null;;
 		*)		swapoff -a >/dev/null;;

init.d/swapfiles.in

@@ -1,46 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-depend()
-{
-	need localmount
-	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
-}
-
-start()
-{
-	ebegin "Activating additional swap space"
-	case "$RC_UNAME" in
-		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
-		*)		swapon -a >/dev/null;;
-	esac
-	eend 0 # If swapon has nothing todo it errors, so always return 0
-}
-
-stop()
-{
-	ebegin "Deactivating additional swap space"
-	case "$RC_UNAME" in
-		Linux)
-			if [ -e /proc/swaps ]; then
-				while read filename type rest; do
-					case "$type" in
-						file) swapoff $filename >/dev/null;;
-					esac
-					case "$filename" in
-						/dev/loop*) swapoff $filename >/dev/null;;
-					esac
-				done < /proc/swaps
-			fi
-			;;
-	esac
-	eend 0
-}

init.d/swclock.in

@@ -13,9 +13,8 @@ description="Sets the local clock to the mtime of a given file."
 
 depend()
 {
-	before *
 	provide clock
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 # swclock is an OpenRC built in

init.d/syscons.in

@@ -10,6 +10,7 @@
 # except according to the terms contained in the LICENSE file.
 
 depend() {
+	after clock
 	need localmount
 	keyword -jail -prefix
 }

init.d/sysctl.BSD.in

@@ -1,38 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-depend()
-{
-	before bootmisc logger
-	keyword -prefix
-}
-
-start()
-{
-	[ -e /etc/sysctl.conf ] || return 0
-	local retval=0 var= comments= conf=
-	ebegin "Configuring kernel parameters"
-	eindent
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
-			while read var comments; do
-				case "$var" in
-				""|"#"*) continue;;
-				esac
-				sysctl -w "$var" >/dev/null || retval=1
-			done < "$conf"
-			veend $retval
-		fi
-	done
-	eoutdent
-	eend $retval "Some errors were encountered"
-}

init.d/sysctl.GNU.in

@@ -1,39 +0,0 @@
-#!@PREFIX@/sbin/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-#FIXME: Modify for GNU/Hurd
-
-depend()
-{
-	before bootmisc logger
-	keyword -prefix
-}
-
-start()
-{
-	[ -e /etc/sysctl.conf ] || return 0
-	local retval=0 var= comments= conf=
-	ebegin "Configuring kernel parameters"
-	eindent
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
-			while read var comments; do
-				case "$var" in
-				""|"#"*) continue;;
-				esac
-				sysctl -w "$var" >/dev/null || retval=1
-			done < "$conf"
-			veend $retval
-		fi
-	done
-	eoutdent
-	eend $retval "Some errors were encountered"
-}

init.d/sysctl.in

@@ -11,17 +11,17 @@
 
 depend()
 {
+	after clock
 	before bootmisc logger
-	keyword -prefix
+	keyword -prefix -systemd-nspawn -vserver
 }
 
-start()
+BSD_sysctl()
 {
 	[ -e /etc/sysctl.conf ] || return 0
 	local retval=0 var= comments= conf=
-	ebegin "Configuring kernel parameters"
 	eindent
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
+	for conf in /etc/sysctl.conf /etc/sysctl.d/*.conf; do
 		if [ -r "$conf" ]; then
 			vebegin "applying $conf"
 			while read var comments; do
@@ -34,5 +34,25 @@ start()
 		fi
 	done
 	eoutdent
-	eend $retval "Some errors were encountered"
+	return $retval
+}
+
+Linux_sysctl()
+{
+	local quiet
+	yesno $rc_verbose || quiet=-q
+
+	sysctl ${quiet} --system
+}
+
+start()
+{
+	local rc=0
+
+	ebegin "Configuring kernel parameters"
+	case "$RC_UNAME" in
+	*BSD|GNU) BSD_sysctl; rc=$? ;;
+	Linux) Linux_sysctl; rc=$? ;;
+	esac
+	eend $rc "Unable to configure some kernel parameters"
 }

init.d/sysfs.in

@@ -15,7 +15,7 @@ sysfs_opts=nodev,noexec,nosuid
 
 depend()
 {
-	keyword -lxc -prefix -systemd-nspawn -vserver
+	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 mount_sys()
@@ -88,54 +88,23 @@ mount_misc()
 		fi
 	fi
 
-	# setup up kernel support for efivarfs
-	# slightly complicated, as if it's build as a module but NOT yet loaded,
-	# it will NOT appear in /proc/filesystems yet
-	if [ -d /sys/firmware/efi/efivars ] \
-		&& ! mountinfo -q /sys/firmware/efi/efivars; then
-		modprobe -q efivarfs
-		if grep -qs efivarfs /proc/filesystems; then
-			ebegin "Mounting efivarfs filesystem"
-			mount -n -t efivarfs -o ${sysfs_opts} \
-				efivarfs /sys/firmware/efi/efivars
-			eend $?
-		fi
-	fi
-}
-
-mount_cgroups()
-{
-	# set up kernel support for cgroups
-	if [ -d /sys/fs/cgroup ] && ! mountinfo -q /sys/fs/cgroup; then
-		if grep -qs cgroup /proc/filesystems; then
-			ebegin "Mounting cgroup filesystem"
-			local opts="${sysfs_opts},mode=755,size=${rc_cgroupsize:-10m}"
-			mount -n -t tmpfs -o ${opts} cgroup_root /sys/fs/cgroup
+	# Setup Kernel Support for persistent storage
+	if [ -d /sys/fs/pstore ] && ! mountinfo -q /sys/fs/pstore; then
+		if grep -qs 'pstore$' /proc/filesystems; then
+			ebegin "Mounting persistent storage (pstore) filesystem"
+			mount -t pstore pstore -o ${sysfs_opts} /sys/fs/pstore
 			eend $?
 		fi
 	fi
 
-	mountinfo -q /sys/fs/cgroup || return 0
-
-	if ! mountinfo -q /sys/fs/cgroup/openrc; then
-		local agent="@LIBEXECDIR@/sh/cgroup-release-agent.sh"
-		mkdir /sys/fs/cgroup/openrc
-		mount -n -t cgroup \
-			-o none,${sysfs_opts},name=openrc,release_agent="$agent" \
-			openrc /sys/fs/cgroup/openrc
-		printf 1 > /sys/fs/cgroup/openrc/notify_on_release
+	# set up kernel support for efivarfs
+	if [ -d /sys/firmware/efi/efivars ] &&
+		! mountinfo -q /sys/firmware/efi/efivars; then
+		ebegin "Mounting efivarfs filesystem"
+		mount -n -t efivarfs -o ro \
+			efivarfs /sys/firmware/efi/efivars 2> /dev/null
+		eend 0
 	fi
-
-	yesno ${rc_controller_cgroups:-YES} && [ -e /proc/cgroups ] || return 0
-	while read name hier groups enabled rest; do
-		case "${enabled}" in
-			1)	mountinfo -q /sys/fs/cgroup/${name} && continue
-				mkdir /sys/fs/cgroup/${name}
-				mount -n -t cgroup -o ${sysfs_opts},${name} \
-					${name} /sys/fs/cgroup/${name}
-				;;
-		esac
-	done < /proc/cgroups
 }
 
 restorecon_sys()
@@ -143,7 +112,6 @@ restorecon_sys()
 	if [ -x /sbin/restorecon ]; then
 		ebegin "Restoring SELinux contexts in /sys"
 		restorecon -F /sys/devices/system/cpu/online >/dev/null 2>&1
-		restorecon -rF /sys/fs/cgroup >/dev/null 2>&1
 		eend $?
 	fi
 }
@@ -152,7 +120,6 @@ start()
 {
 	mount_sys
 	mount_misc
-	mount_cgroups
 	restorecon_sys
 	return 0
 }

init.d/syslogd.in

@@ -22,6 +22,6 @@ depend()
 	provide logger
 	use net newsyslog
 	need localmount
-	after bootmisc
+	after bootmisc clock
 	keyword -prefix
 }

init.d/termencoding.in

@@ -16,9 +16,9 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
-	keyword -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 	use root
-	after bootmisc
+	after bootmisc clock
 }
 
 start()

init.d/tmpfiles.dev.in

@@ -1,20 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright 1999-2012 Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-description="Set up tmpfiles.d entries"
-
-depend()
-{
-	use dev-mount
-	before dev
-	keyword -prefix -vserver
-}
-
-start()
-{
-	ebegin "Setting up tmpfiles.d entries for /dev"
-	@LIBEXECDIR@/sh/tmpfiles.sh --prefix=/dev --create --boot ${tmpfiles_opts}
-	eend $?
-	return 0
-}

init.d/tmpfiles.setup.in

@@ -1,19 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright 1999-2012 Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-description="Set up tmpfiles.d entries"
-
-depend()
-{
-	need localmount
-}
-
-start()
-{
-	ebegin "Setting up tmpfiles.d entries"
-	@LIBEXECDIR@/sh/tmpfiles.sh --exclude-prefix=/dev --create --remove --boot \
-		${tmpfiles_opts}
-	eend $?
-	return 0
-}

init.d/ttys.in

@@ -11,7 +11,7 @@
 
 depend()
 {
-	after fsck
+	after clock fsck
 	keyword -prefix
 }