update ChangeLog

This path should not be hard coded in the open call.
Linux prior to 2.4.19 did not have /proc/self/mounts, so for now I'm
making this value /proc/mounts everywhere, but that may change to
/proc/self/mounts on linux; I'm not sure we should care about <2.4.19.

X-Gentoo-Bug: 604646
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=604646

.gitignore

@@ -1,4 +1,4 @@
-*.bz2
+*.gz
 
 *.diff
 *.patch

BUSYBOX.md

@@ -22,9 +22,6 @@ or recognize the nofail option in fstab.
 
 CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
 
-CONFIG_IP -- The ip applet  doesn't support the "scope" modifier for
-"ip route add" and "ip address add".
-
 CONFIG_BB_SYSCTL -- The sysctl applet does not support the --system command
 line switch.
 

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.21
+VERSION=	0.23.1
 PKG=		${NAME}-${VERSION}

NEWS.md

@@ -3,6 +3,27 @@
 This file will contain a list of notable changes for each release. Note
 the information in this file is in reverse order.
 
+## OpenRC-0.23
+
+The tmpfiles.d processing code, which was part of previous versions of
+OpenRC, has been separated into its own package [1]. If you need to
+process systemd style tmpfiles.d files, please install this package.
+
+[1] https://github.com/openrc/opentmpfiles
+
+## OpenRC-0.22
+
+In previous versions of OpenRC, configuration information was processed
+so that service-specific configuration stored in /etc/conf.d/* was
+overridden by global configuration stored in /etc/rc.conf. This release
+reverses that. Global configuration is now overridden by
+service-specific configuration.
+
+The swapfiles service, which was basically a copy of the swap service,
+has been removed. If you are only using swap partitions, this change
+will not affect you. If you are using swap files, please adjust the
+dependencies of the swap service as shown in /etc/conf.d/swap.
+
 ## OpenRC-0.21
 
 This version adds a daemon supervisor which can start daemons and
@@ -17,6 +38,19 @@ these files for the setup.
 The deprecation messages in 0.13.x for runscript and rc are now
 made visible in preparation for the removal of these binaries in 1.0.
 
+The steps you should take to get rid of these warnings is to run openrc
+in initialization steps instead of rc and change the shebang lines in
+service scripts to refer to "openrc-run" instead of "runscript".
+
+In 0.21.4, a modules-load service was added. This works like the
+equivalent service in systemd. It looks for files named *.conf first in
+/usr/lib/modules-load.d, then /run/modules-load.d, then
+/etc/modules-load.d. These files contain a list of modules, one per
+line, which should be loaded into the kernel. If a file name appears in
+/run/modules-load.d, it overrides a file of the same name in
+/usr/lib/modules-load.d. A file appearing in /etc/modules-load.d
+overrides a file of the same name in both previous directories.
+
 ## OpenRC-0.19
 
 This version adds a net-online service. By default, this

README.md

@@ -43,9 +43,6 @@ We don't support building a static OpenRC with PAM.
 
 You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`.
 
-If you debug memory under valgrind, add `-DDEBUG_MEMORY`
-to your `CPPFLAGS` so that all malloc memory should be freed at exit.
-
 If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`.
 
 `PKG_PREFIX` should be set to where packages install to by default.

conf.d/.gitignore

@@ -1,2 +0,0 @@
-network
-staticroute

conf.d/Makefile

@@ -1,19 +1,16 @@
 include ../mk/net.mk
 
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
-		${CONF-${OS}}
+CONF=	bootmisc fsck hostname localmount netmount swap urandom ${CONF-${OS}}
 
 ifeq (${MKNET},yes)
 CONF+= network staticroute
-TARGETS+=	network staticroute
-CLEANFILES+=	network staticroute
 endif
 
 MK=	../mk
 include ${MK}/os.mk
 
-CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
+CONF-FreeBSD=	ipfw modules moused powerd rarpd savecore syscons
 
 CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules mtab \
 	net-online
@@ -21,9 +18,3 @@ CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules mtab \
 CONF-NetBSD=	moused rarpd savecore
 
 include ${MK}/scripts.mk
-
-network: network.in network${SFX}
-	cat $^ > $@
-
-staticroute: staticroute${SFX}
-	cp $@${SFX} $@

conf.d/modules

@@ -1,18 +1,22 @@
-# You can define a list modules for a specific kernel version,
-# a released kernel version, a main kernel version or just a list.
+# Linux users can define a list of modules for a specific kernel version,
+# a released kernel version, a main kernel version or all kernel versions.
 # The most specific versioned variable will take precedence.
+# FreeBSD users can only use the modules="foo bar" setting.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
 #modules_2="ipv6"
 #modules="ohci1394"
 
-# You can give modules a different name when they load - the new name
+# Linux users can give modules a different name when they load - the new name
 # will also be used to pick arguments below.
+# This is not supported on FreeBSD.
 #modules="dummy:dummy1"
 
-# Give the modules some arguments if needed, per version if necessary.
+# Linux users can give the modules some arguments if needed, per version
+# if necessary.
 # Again, the most specific versioned variable will take precedence.
+# This is not supported on FreeBSD.
 #module_ieee1394_args="debug"
 #module_ieee1394_args_2_6_23_gentoo_r5="debug2"
 #module_ieee1394_args_2_6_23="debug3"

conf.d/net-online

@@ -1,6 +1,6 @@
 # The interfaces setting controls which interfaces the net-online
-# service considers in deciding whether the network is active. By
-# default, it is all ethernet or wireless LAN interfaces.
+# service considers in deciding whether the network is active. The
+# default is all interfaces that support ethernet.
 #interfaces=""
 
 # This setting controls whether a ping to the default gateway is

conf.d/network

@@ -0,0 +1,80 @@
+# Assign static IP addresses and run custom scripts per interface.
+# Seperate commands with ;
+# Prefix with ! to run a shell script.
+# Use \$int to represent the interface
+#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
+
+# You also have ifup_eth0 and ifdown_eth0 to run other commands when
+# eth0 is started and stopped.
+# You should note that we don't stop the network at system shutdown by default.
+# If you really need this, then set keep_network=NO
+
+# Lastly, the interfaces variable pulls in virtual interfaces that cannot
+# be automatically detected.
+#interfaces="br0 bond0 vlan0"
+
+# You can also use files instead of variables here if you like:
+# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
+# /etc/ip.eth0 is equivalent to ifconfig_eth0
+# /etc/ifup.eth0 is equivalent to ifup_eth0
+# /etc/ifdown.eth0 is equivalent to ifdown_eth0
+# Any files found will automatically be put into the interfaces variable.
+# You don't need to escape variables in files, so use $int instead of \$int.
+
+# If you require DHCP, you should install dhcpcd and add it to the boot or
+# default runlevel.
+
+# NIS users can set the domain name here
+#domainname="foobar"
+
+# You can add a default route.
+# The way this is done is slightly different depending on the operating system.
+#
+# *BSD:
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"
+#Hurd/Linux (ifconfig):
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"
+
+# The remainder of this file applies to Linux only and shows how
+# iproute2 is supported along with other examples.
+
+# ifconfig under Linux is not that powerful and doesn't easily handle
+# multiple addresses
+# On the other hand, iproute2 is quite powerful and is also supported
+#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
+
+# You can also use iproute2 to add the default route.
+#defaultiproute="via 192.168.0.1"
+#defaultiproute6="via 2001:a:b:c"
+
+# ip doesn't handle MTU like ifconfig, but we can do it like so
+#ifup_eth0="ip link set \$int mtu 1500"
+
+# Create a bonded interface
+#interfaces="bond0"
+#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
+#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
+#ifdown_bond0="rmmod bonding"
+
+# Create tap interface and a bridge interface.
+# We add the tap to the bridge.
+# An external program, like dhcpcd, will configure the IP on the bridge
+#interfaces="tun0 br0"
+#ifup_tun0="tunctl -t \$int"
+#ifdown_tun0="tunctl -d \$int"
+#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
+#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
+
+# Create VLAN
+#interfaces="eth0_2 eth0_3 eth0_4"
+#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
+#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
+#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
+#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
+#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
+
+# Normally you would use wpa_supplicant to configure wireless, but you can
+# use iwconfig also
+#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.BSD.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"

conf.d/network.GNU-kFreeBSD.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"

conf.d/network.GNU.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"

conf.d/network.Linux.in

@@ -1,43 +0,0 @@
-
-# You can assign a default route
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"
-
-# ifconfig under Linux is not that powerful and doesn't easily handle
-# multiple addresses
-# On the other hand, ip (iproute2) is quite powerful and is also supported
-#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
-
-# You can also use ip to add the default route.
-#defaultiproute="via 192.168.0.1"
-#defaultiproute6="via 2001:a:b:c"
-
-# ip doesn't handle MTU like ifconfig, but we can do it like so
-#ifup_eth0="ip link set \$int mtu 1500"
-
-# Create a bonded interface
-#interfaces="bond0"
-#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
-#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
-#ifdown_bond0="rmmod bonding"
-
-# Create tap interface and a bridge interface.
-# We add the tap to the bridge.
-# An external program, like dhcpcd, will configure the IP on the bridge
-#interfaces="tun0 br0"
-#ifup_tun0="tunctl -t \$int"
-#ifdown_tun0="tunctl -d \$int"
-#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
-#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
-
-# Create VLAN
-#interfaces="eth0_2 eth0_3 eth0_4"
-#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
-#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
-#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
-#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
-#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
-
-# Normally you would use wpa_supplicant to configure wireless, but you can
-# use iwconfig also
-#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.in

@@ -1,28 +0,0 @@
-# Assign static IP addresses and run custom scripts per interface.
-# Seperate commands with ;
-# Prefix with ! to run a shell script.
-# Use \$int to represent the interface
-#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
-
-# You also have ifup_eth0 and ifdown_eth0 to run other commands when
-# eth0 is started and stopped.
-# You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set keep_network=NO
-
-# Lastly, the interfaces variable pulls in virtual interfaces that cannot
-# be automatically detected.
-#interfaces="br0 bond0 vlan0"
-
-# You can also use files instead of variables here if you like:
-# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
-# /etc/ip.eth0 is equivalent to ifconfig_eth0
-# /etc/ifup.eth0 is equivalent to ifup_eth0
-# /etc/ifdown.eth0 is equivalent to ifdown_eth0
-# Any files found will automatically be put into the interfaces variable.
-# You don't need to escape variables in files, so use $int instead of \$int.
-
-# If you require DHCP, you should install dhcpcd and it to the boot or
-# default runlevel.
-
-# NIS users can set the domain name here
-#domainname="foobar"

conf.d/staticroute

@@ -0,0 +1,26 @@
+# Static routes are defined differently depending on your operating
+# system, so please be sure to use the correct syntax.
+# Do not use this file to define the default route.
+# In all settings, multiple routes should be separated using ; or new lines.
+
+# Define static routes on Linux using route. See route(8) for syntax.
+#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
+#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
+
+# Define static routes on Linux using iproute2. See ip(8) for syntax.
+#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"
+
+# Define static routes on GNU/Hurd. See route(8) for syntax.
+# /etc/route.conf(5) takes precedence over this configuration.
+# FIXME: "net ..." not supported
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"
+
+# Define static routes on GNU/KFreeBSD. See route(8) for syntax.
+#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
+#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"
+
+# Define static routes on other BSD systems. See route(8) for syntax.
+# /etc/route.conf(5) takes precedence over this configuration.
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.BSD.in

@@ -1,6 +0,0 @@
-# Separate multiple routes using ; or new lines.
-# /etc/route.conf(5) takes precedence over this configuration.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.GNU-kFreeBSD.in

@@ -1,5 +0,0 @@
-# Separate multiple routes using ; or new lines.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
-#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"

conf.d/staticroute.GNU.in

@@ -1,7 +0,0 @@
-# Separate multiple routes using ; or new lines.
-# /etc/route.conf(5) takes precedence over this configuration.
-
-# Example static routes. See route(8) for syntax.
-# FIXME: "net ..." not supported
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"

conf.d/staticroute.Linux.in

@@ -1,8 +0,0 @@
-# Separate multiple routes using ; or new lines.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
-#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
-
-# Example static routes using iproute2. See ip(8) for syntax.
-#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

conf.d/swap

@@ -0,0 +1,13 @@
+# If you are only using local swap partitions, you should not change
+# this file. Otherwise, you need to uncomment the below rc_before line
+# followed by the appropriate rc_need line.
+#rc_before="!localmount"
+#
+# If you are using swap files stored on local file systems, uncomment
+# this line.
+#rc_need="localmount"
+#
+# If you are using swap files stored on network file systems or swap
+# partitions stored on network block devices such as iSCSI, uncomment
+# this line.
+#rc_need="netmount"

conf.d/tmpfiles

@@ -1,3 +0,0 @@
-# Extra options for tmpfiles.sh
-#tmpfiles_opts="--verbose"
-tmpfiles_opts=""

etc/.gitignore

@@ -1,3 +1,2 @@
-rc.conf
 rc
 rc.shutdown

etc/Makefile

@@ -1,10 +1,8 @@
 DIR=	${SYSCONFDIR}
-SRCS=	rc.conf.in rc.in rc.shutdown.in
+SRCS=	rc.in rc.shutdown.in
 BIN=	${BIN-${OS}}
 CONF=	rc.conf ${BIN-${OS}}
 
-CLEANFILES+=	rc.conf
-
 MK=	../mk
 include ${MK}/os.mk
 
@@ -23,6 +21,3 @@ CONF-NetBSD=
 SED_EXTRA=	${SED_EXTRA-${OS}}
 
 include ${MK}/scripts.mk
-
-rc.conf: rc.conf.in rc.conf.${OS}
-	${SED} ${SED_REPLACE} ${SED_EXTRA} $^ > $@

etc/rc.conf

@@ -48,7 +48,7 @@
 # /var/log/rc.log
 # NOTE: Linux systems require the devfs service to be started before
 # logging can take place and as such cannot log the sysinit runlevel.
-#rc_logger="YES"
+#rc_logger="NO"
 
 # Through rc_log_path you can specify a custom log file.
 # The default value is: /var/log/rc.log
@@ -117,6 +117,9 @@
 # Some daemons are started and stopped via start-stop-daemon.
 # We can set some things on a per service basis, like the nicelevel.
 #SSD_NICELEVEL="-19"
+# Or the ionice level. The format is class[:data] , just like the
+# --ionice start-stop-daemon parameter.
+#SSD_IONICELEVEL="2:2"
 
 # Pass ulimit parameters
 # If you are using bash in POSIX mode for your shell, note that the
@@ -146,6 +149,102 @@
 #rc_foo_bar_after="clock"
 
 # You can also remove dependencies.
-# This is mainly used for saying which servies do NOT provide net.
+# This is mainly used for saying which services do NOT provide net.
 #rc_net_tap0_provide="!net"
 
+# This is the subsystem type.
+# It is used to match against keywords set by the keyword call in the
+# depend function of service scripts.
+#
+# It should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+# If it is commented out, automatic detection will be used.
+#
+# The list below shows all possible settings as well as the host
+# operating systems where they can be used and autodetected.
+#
+# ""               - nothing special
+# "docker"         - Docker container manager (Linux)
+# "jail"           - Jail (DragonflyBSD or FreeBSD)
+# "lxc"            - Linux Containers
+# "openvz"         - Linux OpenVZ
+# "prefix"         - Prefix
+# "rkt"            - CoreOS container management system (Linux)
+# "subhurd"        - Hurd subhurds (to be checked)
+# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
+# "uml"            - Usermode Linux
+# "vserver"        - Linux vserver
+# "xen0"           - Xen0 Domain (Linux and NetBSD)
+# "xenU"           - XenU Domain (Linux and NetBSD)
+#rc_sys=""
+
+# on Linux and Hurd, this is the number of ttys allocated for logins
+# It is used in the consolefont, keymaps, numlock and termencoding
+# service scripts.
+rc_tty_number=12
+
+##############################################################################
+# LINUX CGROUPS RESOURCE MANAGEMENT
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controller is mounted under
+# /sys/fs/cgroup.
+# None of the other options in this section work if this is set to "NO".
+#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the hugetlb controller settings for this service.
+#rc_cgroup_hugetlb=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_cls controller settings for this service.
+#rc_cgroup_net_cls=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set the pids controller settings for this service.
+#rc_cgroup_pids=""
+
+# Set this to YES if you want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"

etc/rc.conf.DragonFly

@@ -1,13 +0,0 @@
-##############################################################################
-# DragonFly BSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on DragonFly BSD:
-# ""        - nothing special
-# "jail"    - DragonFly BSD jails
-# "prefix"  - Prefix
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

etc/rc.conf.FreeBSD

@@ -1,13 +0,0 @@
-##############################################################################
-# FreeBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on FreeBSD:
-# ""        - nothing special
-# "jail"    - FreeBSD jails
-# "prefix"  - Prefix
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

etc/rc.conf.GNU

@@ -1,14 +0,0 @@
-##############################################################################
-# GNU/Hurd SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on GNU/Hurd:
-# ""        - nothing special
-# "subhurd" - Hurd subhurds (to be checked)
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-#rc_tty_number=6?

etc/rc.conf.GNU-kFreeBSD

@@ -1,11 +0,0 @@
-##############################################################################
-# GNU/kFreeBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on GNU/kFreeBSD:
-# ""        - nothing special
-# "jail"    - FreeBSD jails (not yet implemented)
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""

etc/rc.conf.Linux

@@ -1,90 +0,0 @@
-##############################################################################
-# LINUX SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on Linux:
-# ""               - nothing special
-# "docker"         - Docker container manager
-# "lxc"            - Linux Containers
-# "openvz"         - Linux OpenVZ
-# "prefix"         - Prefix
-# "rkt"            - CoreOS container management system
-# "uml"            - Usermode Linux
-# "vserver"        - Linux vserver
-# "systemd-nspawn" - Container created by the systemd-nspawn utility
-# "xen0"           - Xen0 Domain
-# "xenU"           - XenU Domain
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-rc_tty_number=12
-
-##############################################################################
-# CGROUPS RESOURCE MANAGEMENT
-
-# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controller is mounted under
-# /sys/fs/cgroup.
-# None of the other options in this section work if this is set to "NO".
-#rc_controller_cgroups="YES"
-
-# The following settings allow you to set up values for the cgroup
-# controllers for your services.
-# They can be set in this file;, however, if you do this, the settings
-# will apply to all of your services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the names of the settings followed by their
-# values. Each variable can hold multiple settings.
-# For example, you would use this to set the cpu.shares setting in the
-# cpu controller to 512 for your service.
-# rc_cgroup_cpu="
-# cpu.shares 512
-# "
-#
-#For more information about the adjustments that can be made with
-#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
-
-# Set the blkio controller settings for this service.
-#rc_cgroup_blkio=""
-
-# Set the cpu controller settings for this service.
-#rc_cgroup_cpu=""
-
-# Add this service to the cpuacct controller (any value means yes).
-#rc_cgroup_cpuacct=""
-
-# Set the cpuset controller settings for this service.
-#rc_cgroup_cpuset=""
-
-# Set the devices controller settings for this service.
-#rc_cgroup_devices=""
-
-# Set the hugetlb controller settings for this service.
-#rc_cgroup_hugetlb=""
-
-# Set the memory controller settings for this service.
-#rc_cgroup_memory=""
-
-# Set the net_cls controller settings for this service.
-#rc_cgroup_net_cls=""
-
-# Set the net_prio controller settings for this service.
-#rc_cgroup_net_prio=""
-
-# Set the pids controller settings for this service.
-#rc_cgroup_pids=""
-
-# Set this to YES if yu want all of the processes in a service's cgroup
-# killed when the service is stopped or restarted.
-# This should not be set globally because it kills all of the service's
-# child processes, and most of the time this is undesirable. Please set
-# it in /etc/conf.d/<service>.
-# To perform this cleanup manually for a stopped service, you can
-# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
-# rc-service <service> cgroup_cleanup.
-# rc_cgroup_cleanup="NO"

etc/rc.conf.NetBSD

@@ -1,14 +0,0 @@
-##############################################################################
-# NetBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on NetBSD:
-# ""        - nothing special
-# "prefix"  - Prefix
-# "xen0"    - Xen0 Domain
-# "xenU"    - XenU Domain
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

etc/rc.shutdown.in

@@ -14,7 +14,7 @@ trap : SIGINT SIGQUIT
 
 # Try and use stuff in /lib over anywhere else so we can shutdown
 # local mounts correctly.
-LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}" ; export LD_LIBRARY_PATH
+LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LD_LIBRARY_PATH}" ; export LD_LIBRARY_PATH
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)

guide.md

@@ -16,14 +16,14 @@ Current size is about 10k LoC C, and about 4k LoC shell.
 OpenRC is known to work on Linux, many BSDs (FreeBSD, OpenBSD, DragonFlyBSD at 
 least) and HURD.
 
-Services are stateful (i.e. start; start will lead to "it's already started")
+Services are stateful (i.e. `start`; `start` will lead to "it's already started")
 
 # Startup
 
-Usually PID1 (aka. init) calls the OpenRC binary ("/sbin/openrc" by default).
+Usually PID1 (aka. `init`) calls the OpenRC binary (`/sbin/openrc` by default).
 (The default setup assumes sysvinit for this)
 
-openrc scans the runlevels (default: "/etc/runlevels") and builds a dependency 
+openrc scans the runlevels (default: `/etc/runlevels`) and builds a dependency
 graph, then starts the needed service scripts, either serialized (default) or in 
 parallel.
 
@@ -32,29 +32,29 @@ daemon. (Integration with tools like monit, runit or s6 can be done)
 
 # Shutdown
 
-On change to runlevel 0/6 or running "reboot", "halt" etc., openrc stops all 
-services that are started and runs the services in the "shutdown" runlevel.
+On change to runlevel 0/6 or running `reboot`, `halt` etc., openrc stops all
+services that are started and runs the services in the `shutdown` runlevel.
 
 # Modifying Service Scripts
 
 Any service can, at any time, be started/stopped/restarted by executing 
-"rc-service someservice start", "rc-service someservice stop", etc.
+`rc-service someservice start`, `rc-service someservice stop`, etc.
 Another, less preferred method, is to run the service script directly,
-e.g. "/etc/init.d/service start", "/etc/init.d/service stop", etc.
+e.g. `/etc/init.d/service start`, `/etc/init.d/service stop`, etc.
 
 OpenRC will take care of dependencies, e.g starting apache will start network 
 first, and stopping network will stop apache first.
 
-There is a special command "zap" that makes OpenRC 'forget' that a service is 
+There is a special command `zap` that makes OpenRC 'forget' that a service is
 started; this is mostly useful to reset a crashed service to stopped state 
 without invoking the (possibly broken) stop function of the service script.
 
-Calling "openrc" without any arguments will try to reset all services so
+Calling `openrc` without any arguments will try to reset all services so
 that the current runlevel is satisfied; if you manually started apache it will be 
 stopped, and if squid died but is in the current runlevel it'll be restarted.
 
-There is a "service" helper that emulates the syntax seen on e.g. older Redhat 
-and Ubuntu ("service nginx start" etc.)
+There is a `service` helper that emulates the syntax seen on e.g. older Redhat
+and Ubuntu (`service nginx start` etc.)
 
 # Runlevels
 
@@ -65,100 +65,112 @@ own if needed. This allows, for example, to have a default runlevel with
 "everything" enabled, and a "powersaving" runlevel where some services are 
 disabled.
 
-The "rc-status" helper will print all currently active runlevels and the state 
+The `rc-status` helper will print all currently active runlevels and the state
 of init scripts in them:
 
+```
 # rc-status
  * Caching service dependencies ... [ ok ]
 Runlevel: default
  modules                     [  started  ]
  lvm                         [  started  ]
+```
 
-All runlevels are represented as folders in /etc/runlevels/ with symlinks to 
+All runlevels are represented as folders in `/etc/runlevels/` with symlinks to 
 the actual init scripts.
 
-Calling openrc with an argument ("openrc default") will switch to that
+Calling openrc with an argument (`openrc default`) will switch to that
 runlevel; this will start and stop services as needed.
 
-Managing runlevels is usually done through the "rc-update" helper, but could of 
+Managing runlevels is usually done through the `rc-update` helper, but could of 
 course be done by hand if desired.
-e.g. "rc-update add nginx default" - add nginx to the default runlevel
-Note: This will not auto-start nginx! You'd still have to trigger "rc" or run 
+e.g. `rc-update add nginx default` - add nginx to the default runlevel
+Note: This will not auto-start nginx! You'd still have to trigger `rc` or run 
 the initscript by hand.
 
 FIXME: Document stacked runlevels
 
-The default startup uses the runlevels "boot", "sysinit" and "default", in that 
-order. Shutdown uses the "shutdown" runlevel.
+The default startup uses the runlevels `boot`, `sysinit` and `default`, in that 
+order. Shutdown uses the `shutdown` runlevel.
 
 
 # Syntax of Service Scripts
 
 Service scripts are shell scripts. OpenRC aims at using only the standardized 
 POSIX sh subset for portability reasons. The default interpreter (build-time 
-toggle) is /bin/sh, so using for example mksh is not a problem.
+toggle) is `/bin/sh`, so using for example mksh is not a problem.
 
 OpenRC has been tested with busybox sh, ash, dash, bash, mksh, zsh and possibly 
 others. Using busybox sh has been difficult as it replaces commands with 
 builtins that don't offer the expected features.
 
-The interpreter for initscripts is #!/sbin/openrc-run
+The interpreter for initscripts is `#!/sbin/openrc-run`.
 Not using this interpreter will break the use of dependencies and is not 
-supported. (iow: if you insist on using #!/bin/sh you're on your own)
+supported. (iow: if you insist on using `#!/bin/sh` you're on your own)
 
-A "depend" function declares the dependencies of this service script.
+A `depend` function declares the dependencies of this service script.
 All scripts must have start/stop/status functions, but defaults are provided.
 Extra functions can be added easily:
 
+```
 extra_commands="checkconfig"
 checkconfig() {
 	doSomething
 }
+```
 
-This exports the checkconfig function so that "/etc/init.d/someservice 
-checkconfig" will be available, and it "just" runs this function.
+This exports the checkconfig function so that `/etc/init.d/someservice 
+checkconfig` will be available, and it "just" runs this function.
 
-While commands defined in extra_commands are always available, commands
-defined in extra_started_commands will only work when the service is started
-and those defined in extra_stopped_commands will only work when the service is
+While commands defined in `extra_commands` are always available, commands
+defined in `extra_started_commands` will only work when the service is started
+and those defined in `extra_stopped_commands` will only work when the service is
 stopped. This can be used for implementing graceful reload and similar
 behaviour.
 
 Adding a restart function will not work, this is a design decision within 
 OpenRC. Since there may be dependencies involved (e.g. network -> apache) a 
 restart function is in general not going to work. 
-restart is internally mapped to stop() + start() (plus handling dependencies).
+restart is internally mapped to `stop()` + `start()` (plus handling dependencies).
 If a service needs to behave differently when it is being restarted vs
-started or stopped, it should test the $RC_CMD variable, for example:
-
-    [ "$RC_CMD" = restart ] && do_something
+started or stopped, it should test the `$RC_CMD` variable, for example:
 
+```
+[ "$RC_CMD" = restart ] && do_something
+```
 
 # The Depend Function
 
 This function declares the dependencies for a service script. This
 determines the order the service scripts start.
 
+```
 depend() {
 	need net
 	use dns logger netmount
 	want coolservice
 }
+```
 
-"need" declares a hard dependency - net always needs to be started before this 
+`need` declares a hard dependency - net always needs to be started before this 
 	service does
-"use" is a soft dependency - if dns, logger or netmount is in this runlevel 
+
+`use` is a soft dependency - if dns, logger or netmount is in this runlevel 
 	start it before, but we don't care if it's not in this runlevel.
-	"want" is between need and use - try to start coolservice if it is
+	`want` is between need and use - try to start coolservice if it is
 	installed on the system, regardless of whether it is in the
 	runlevel, but we don't care if it starts.
-"before" declares that we need to be started before another service
-"after" declares that we need to be started after another service, without 
+
+`before` declares that we need to be started before another service
+
+`after` declares that we need to be started after another service, without 
 	creating a dependency (so on calling stop the two are independent)
-"provide" allows multiple implementations to provide one service type, e.g.:
-	'provide cron' is set in all cron-daemons, so any one of them started 
+
+`provide` allows multiple implementations to provide one service type, e.g.:
+	`provide cron` is set in all cron-daemons, so any one of them started 
 	satisfies a cron dependency
-"keyword" allows platform-specific overrides, e.g. "keyword -lxc" makes this 
+
+`keyword` allows platform-specific overrides, e.g. `keyword -lxc` makes this 
 	service script a noop in lxc containers. Useful for things like keymaps, 
 	module loading etc. that are either platform-specific or not available 
 	in containers/virtualization/...
@@ -169,31 +181,36 @@ FIXME: Anything missing in this list?
 
 All service scripts are assumed to have the following functions:
 
+```
 start()
 stop()
 status()
+```
 
-There are default implementations in rc/sh/openrc-run.sh - this allows very 
+There are default implementations in `lib/rc/sh/openrc-run.sh` - this allows very 
 compact service scripts. These functions can be overridden per service script as 
 needed.
 
 The default functions assume the following variables to be set in the service 
 script:
 
+```
 command=
 command_args=
 pidfile=
+``
 
 Thus the 'smallest' service scripts can be half a dozen lines long
 
-# The Magic of Conf.d
+# The Magic of `conf.d`
 
 Most service scripts need default values. It would be fragile to
-explicitly source some arbitrary files. By convention openrc-run will source
-the matching file in /etc/conf.d/ for any script in /etc/init.d/
+explicitly source some arbitrary files. By convention `openrc-run` will source
+the matching file in `/etc/conf.d/` for any script in `/etc/init.d/`
 
 This allows you to set random startup-related things easily. Example:
 
+```
 conf.d/foo:
 START_OPTS="--extraparameter sausage"
 
@@ -201,6 +218,7 @@ init.d/foo:
 start() {
 	/usr/sbin/foo-daemon ${STARTOPTS}
 }
+```
 
 The big advantage of this split is that most of the time editing of the init 
 script can be avoided.
@@ -213,34 +231,34 @@ mostly syntax-compatible to Debian's s-s-d, but has been rewritten from scratch.
 It helps with starting daemons, backgrounding, creating PID files and many 
 other convenience functions related to managing daemons.
 
-# /etc/rc.conf
+# `/etc/rc.conf`
 
 This file manages the default configuration for OpenRC, and it has examples of 
 per-service-script variables.
 
-Among these are rc_parallel (for parallelized startup), rc_log (logs all boot 
+Among these are `rc_parallel` (for parallelized startup), `rc_log` (logs all boot 
 messages to a file), and a few others.
 
 # ulimit and CGroups
 
-Setting ulimit and nice values per service can be done through the rc_ulimit 
+Setting `ulimit` and `nice` values per service can be done through the `rc_ulimit`
 variable.
 
 Under Linux, OpenRC can optionally use CGroups for process management.
 By default each service script's processes are migrated to their own CGroup.
 
-By changing certain values in the conf.d file limits can be enforced per 
+By changing certain values in the `conf.d` file limits can be enforced per 
 service. It is easy to find orphan processes of a service that persist after 
-stop(), but by default these will NOT be terminated.
-To change this add rc_cgroup_cleanup="yes" in the conf.d files for services 
+`stop()`, but by default these will NOT be terminated.
+To change this add `rc_cgroup_cleanup="yes"` in the `conf.d` files for services 
 where you desire this functionality.
 
 # Caching
 
 For performance reasons OpenRC keeps a cache of pre-parsed initscript metadata
-(e.g. depend). The default location for this is /${RC_SVCDIR}/cache.
+(e.g. `depend`). The default location for this is `/${RC_SVCDIR}/cache`.
 
-The cache uses mtime to check for file staleness. Should any service script
+The cache uses `mtime` to check for file staleness. Should any service script
 change it'll re-source the relevant files and update the cache
 
 # Convenience functions

init.d.misc/wpa_supplicant.in

@@ -39,6 +39,11 @@ find_wireless()
 			fi
 		done
 		;;
+	FreeBSD)
+		for iface in $(sysctl -b net.wlan.devices 2>/dev/null); do
+			echo "${iface##*/}"
+		done
+		;;
 	*)
 		for iface in /dev/net/* $(ifconfig -l 2>/dev/null); do
 			if ifconfig "${iface##*/}" 2>/dev/null | \

init.d/.gitignore

@@ -1,4 +1,5 @@
 binfmt
+modules-load
 bootmisc
 fsck
 hostname
@@ -11,7 +12,6 @@ network
 root
 savecache
 swap
-swapfiles
 sysctl
 urandom
 devfs
@@ -37,6 +37,7 @@ pf
 rarpd
 rc-enabled
 rpcbind
+runsvdir
 savecore
 swap-blk
 swclock
@@ -44,5 +45,3 @@ syslogd
 termencoding
 ttys
 wscons
-tmpfiles.dev
-tmpfiles.setup

init.d/Makefile

@@ -2,8 +2,8 @@ include ../mk/net.mk
 
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
-	netmount.in osclock.in root.in savecache.in swap.in swapfiles.in \
-	tmpfiles.setup.in swclock.in sysctl.in urandom.in s6-svscan.in ${SRCS-${OS}}
+	netmount.in osclock.in root.in savecache.in swap.in swclock.in \
+	sysctl.in runsvdir.in urandom.in s6-svscan.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
 # Are we installing our network scripts?
@@ -15,15 +15,15 @@ MK=	../mk
 include ${MK}/os.mk
 
 # Generic BSD scripts
-SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-		rpcbind.in savecore.in syslogd.in
+SRCS-FreeBSD=	hostid.in modules.in moused.in newsyslog.in pf.in rarpd.in \
+		rc-enabled.in rpcbind.in savecore.in syslogd.in
 # These are FreeBSD specific
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
-		mixer.in nscd.in powerd.in syscons.in
+		modules.in modules-load.in mixer.in nscd.in powerd.in syscons.in
 
 SRCS-Linux=	binfmt.in devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
-		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
-		procfs.in net-online.in sysfs.in termencoding.in tmpfiles.dev.in
+		killprocs.in modules.in modules-load.in mount-ro.in mtab.in numlock.in \
+		procfs.in net-online.in sysfs.in termencoding.in
 
 # Generic BSD scripts
 SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
@@ -31,9 +31,6 @@ SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 # These are NetBSD specific
 SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
 
-%.in: %${SFX}
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@
-
 include ${MK}/scripts.mk
 
 _installafter_: realinstall

init.d/binfmt.in

@@ -15,7 +15,7 @@ depend()
 {
 	after procfs
 	use modules devfs
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/consolefont.in

@@ -15,7 +15,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc modules
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 start()

init.d/devfs.in

@@ -15,7 +15,7 @@ depend()
 {
 	provide dev-mount
 	before dev
-	keyword -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 mount_dev()

init.d/dmesg.in

@@ -14,7 +14,7 @@ description="Set the dmesg level for a cleaner boot"
 depend()
 {
 	before dev modules
-	keyword -lxc -prefix -systemd-nspawn -vserver
+	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/fsck.in

@@ -16,7 +16,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -systemd-nspawn -timeout -vserver -lxc -uml
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -timeout -vserver -uml
 }
 
 _abort() {

init.d/hostname.in

@@ -12,15 +12,25 @@
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -prefix -systemd-nspawn -lxc
+	keyword -docker -lxc -prefix -systemd-nspawn
 }
 
 start()
 {
-	# HOSTNAME variable used to be defined in caps in conf.d/hostname.
-	# It is also a magic variable in bash.
-	hostname=${hostname-${HOSTNAME-localhost}} # checkbashisms: false positive
-	ebegin "Setting hostname to $hostname"
-	hostname "$hostname"
+	local h source x
+	if [ -s @SYSCONFDIR@/hostname ] && [ -r @SYSCONFDIR@/hostname ]; then
+	read h x <@SYSCONFDIR@/hostname
+	source=" from @SYSCONFDIR@/hostname"
+	else
+		# HOSTNAME variable used to be defined in caps in conf.d/hostname.
+		# It is also a magic variable in bash.
+		h=${hostname-${HOSTNAME}} # checkbashisms: false positive
+	fi
+	if [ -z "$h" ]; then
+		einfo "Using default system hostname"
+		return 0
+	fi
+	ebegin "Setting hostname to $h $source"
+	hostname "$h"
 	eend $? "Failed to set the hostname"
 }

init.d/hwclock.in

@@ -30,12 +30,13 @@ fi
 depend()
 {
 	provide clock
+	want modules
 	if yesno $clock_adjfile; then
 		use root
 	else
 		before *
 	fi
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 setupopts()
@@ -69,9 +70,28 @@ _hwclock()
 	return 1
 }
 
+get_noadjfile()
+{
+	if ! yesno $clock_adjfile; then
+		# Some implementations don't handle adjustments
+		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
+			echo --noadjfile
+		fi
+	fi
+}
+
+rtc_exists()
+{
+	local rtc=
+	for rtc in /dev/rtc /dev/rtc[0-9]*; do
+		[ -e "$rtc" ] && break
+	done
+	[ -e "$rtc" ]
+}
+
 start()
 {
-	local retval=0 errstr=""
+	local retval=0 errstr="" modname
 	setupopts
 
 	if [ -z "$utc_cmd" ]; then
@@ -81,26 +101,27 @@ start()
 
 	ebegin "Setting system clock using the hardware clock [$utc]"
 	if [ -e /proc/modules ]; then
-		local rtc=
-		for rtc in /dev/rtc /dev/rtc[0-9]*; do
-			[ -e "$rtc" ] && break
-		done
-		if [ ! -e "${rtc}" ]; then
-			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
+		if ! rtc_exists; then
+			for x in rtc-cmos rtc genrtc; do
+				modprobe -q $x && rtc_exists && modname="$x" && break
+			done
+			[ -n "$modname" ] &&
+				ewarn "The $modname module needs to be configured in" \
+					"@SYSCONFDIR@/conf.d/modules or built in."
 		fi
 	fi
 
 	# Always set the kernel's time zone.
-	_hwclock --systz $utc_cmd $clock_args
+	_hwclock --systz $utc_cmd $(get_noadjfile) $clock_args
 	: $(( retval += $? ))
 
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
-		_hwclock --adjust $utc_cmd
+		_hwclock --adjust $utc_cmd $(get_noadjfile)
 		: $(( retval += $? ))
 	fi
 
 	if yesno ${clock_hctosys:-YES}; then
-		_hwclock --hctosys $utc_cmd $clock_args
+		_hwclock --hctosys $utc_cmd $(get_noadjfile) $clock_args
 		: $(( retval += $? ))
 	fi
 
@@ -122,14 +143,7 @@ stop()
 
 	ebegin "Setting hardware clock using the system clock" "[$utc]"
 
-	if ! yesno $clock_adjfile; then
-		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
-			utc_cmd="$utc_cmd --noadjfile"
-		fi
-	fi
-
-	_hwclock --systohc $utc_cmd $clock_args
+	_hwclock --systohc $utc_cmd $(get_noadjfile) $clock_args
 	retval=$?
 
 	eend $retval "Failed to sync clocks"
@@ -144,5 +158,5 @@ save()
 show()
 {
 	setupopts
-	hwclock --show "$utc_cmd" $clock_args
+	hwclock --show "$utc_cmd" $(get_noadjfile) $clock_args
 }

init.d/keymaps.in

@@ -15,7 +15,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 start()

init.d/localmount.in

@@ -16,15 +16,16 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -jail -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
+	# The types variable must start with no, and must be a type
 	local critical= types="noproc" x= no_netdev= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
-		types="${types},no${x}"
+		types="${types},${x}"
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
@@ -99,8 +100,8 @@ stop()
 				aufs_branch=$(sed 's/=.*//g' $x)
 				eindent
 				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
-					ewarn "Failed to remove branch $aufs_branch from aufs \
-					$aufs_mount_point"
+					ewarn "Failed to remove branch $aufs_branch from aufs" \
+					"$aufs_mount_point"
 				fi
 				eoutdent
 				sync

init.d/loopback.in

@@ -21,22 +21,14 @@ start()
 	if [ "$RC_UNAME" = Linux ]; then
 		ebegin "Bringing up network interface lo"
 		if command -v ip > /dev/null 2>&1; then
-			ip addr add 127.0.0.1/8 dev lo brd + scope host
-			ip route add 127.0.0.0/8 dev lo scope host
+			ip addr add 127.0.0.1/8 dev lo brd +
 			ip link set lo up
 		else
 			ifconfig lo 127.0.0.1 netmask 255.0.0.0
-			route add -net 127.0.0.0 netmask 255.0.0.0 gw 127.0.0.1
 		fi
 	else
 		ebegin "Bringing up network interface lo0"
 		ifconfig lo0 127.0.0.1 netmask 255.0.0.0
-		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 127.0.0.1
 	fi
 	eend $?
 }
-
-stop()
-{
-	return 0
-}

init.d/modules-load.in

@@ -0,0 +1,72 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2016 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+description="Loads a list of modules from systemd-compatible locations."
+
+depend()
+{
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
+}
+
+find_modfiles()
+{
+	local dirs="/usr/lib/modules-load.d /run/modules-load.d /etc/modules-load.d"
+	local basenames files fn x y
+	for x in $dirs; do
+		[ ! -d $x ] && continue
+		for y in $x/*.conf; do
+			[ -f $y ] && basenames="${basenames}\n${y##*/}"
+		done
+	done
+	basenames=$(printf "$basenames" | sort -u)
+	for x in $basenames; do
+		for y in $dirs; do
+			[ -r $y/$x ] &&
+				fn=$y/$x
+		done
+		files="$files $fn"
+	done
+	echo $files
+}
+
+load_modules()
+{
+	local file m modules rc x
+	file=$1
+	[ -z "$file" ] && return 0
+	while read m x; do
+		case $m in
+			\;*) continue ;;
+			\#*) continue ;;
+			*) modules="$modules $m"
+			;;
+		esac
+	done < $file
+	for x in $modules; do
+		ebegin "Loading module $x"
+		case "$RC_UNAME" in
+			FreeBSD) kldload "$x"; rc=$? ;;
+			Linux) modprobe --use-blacklist -q "$x"; rc=$? ;;
+			*) ;;
+		esac
+		eend $rc "Failed to load $x"
+	done
+}
+
+start()
+{
+	local x
+	files=$(find_modfiles)
+	for x in $files; do
+		load_modules $x
+	done
+	return 0
+}

init.d/modules.in

@@ -14,12 +14,24 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	want modules-load
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
-start()
+FreeBSD_modules()
 {
-	# Should not fail if kernel do not have module
+	local cnt=0 x
+	for x in $modules; do
+		ebegin "Loading module $x"
+		kldload "$x"
+		eend $? "Failed to load $x" && : $(( cnt += 1 ))
+	done
+	einfo "Autoloaded $cnt module(s)"
+}
+
+Linux_modules()
+{
+	# Should not fail if kernel does not have module
 	# support compiled in ...
 	[ ! -f /proc/modules ] && return 0
 
@@ -36,22 +48,21 @@ start()
 		x=${x%.*}
 	done
 
-	local list= x= xx= y= args= mpargs= cnt=0 a=
+	local list= x= xx= y= args= mpargs= a=
 	for x in $kv_variant_list ; do
 		eval list=\$modules_$(shell_var "$x")
 		[ -n "$list" ] && break
 	done
 	[ -z "$list" ] && list=$modules
 
+	[ -n "$list" ] && ebegin "Loading kernel modules"
 	for x in $list; do
 		a=${x#*:}
 		if [ "$a" = "$x" ]; then
 			unset mpargs
-			ebegin "Loading module $x"
 		else
 			x=${x%%:*}
 			mpargs="-o $a"
-			ebegin "Loading module $x as $a"
 		fi
 		aa=$(shell_var "$a")
 		xx=$(shell_var "$x")
@@ -63,8 +74,16 @@ start()
 		done
 		[ -z "$args" ] && eval args=\$module_${aa}_args
 		[ -z "$args" ] && eval args=\$module_${xx}_args
-		eval modprobe -q "$mpargs" "$x" "$args"
-		eend $? "Failed to load $x" && : $(( cnt += 1 ))
+		eval modprobe --use-blacklist --verbose "$mpargs" "$x" "$args"
 	done
-	einfo "Autoloaded $cnt module(s)"
+	[ -n "$list" ] && eend
+}
+
+start()
+{
+	case "$RC_UNAME" in
+		FreeBSD|Linux) ${RC_UNAME}_modules ;;
+		*) ;;
+	esac
+	return 0
 }

init.d/mount-ro.in

@@ -14,7 +14,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 depend()
 {
 	need killprocs savecache
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()
@@ -34,6 +34,9 @@ start()
 
 	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
 	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
+	if [ -e "$rc_svcdir"/usr_premounted ]; then
+		m="$m|/usr"
+	fi
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
 	local IFS="$IFS:"
 	for x in $no_umounts $RC_NO_UMOUNTS; do

init.d/net-online.in

@@ -15,7 +15,7 @@ depend()
 {
 	after modules
 	need sysfs
-	keyword -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
 }
 
 get_interfaces()
@@ -42,8 +42,8 @@ get_default_gateway()
 
 start ()
 {
-	local carriers configured dev gateway ifcount infinite interfaces
-	local rc state timeout x
+	local carriers configured dev gateway ifcount infinite
+	local rc state x
 
 	ebegin "Checking to see if the network is online"
 	rc=0

init.d/netmount.in

@@ -24,7 +24,7 @@ depend()
 	want $mywant
 	use afc-client amd openvpn
 	use dns
-	keyword -jail -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/numlock.in

@@ -16,7 +16,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 _setleds()

init.d/procfs.in

@@ -13,16 +13,22 @@ description="Mounts misc filesystems in /proc."
 
 depend()
 {
-	use modules devfs
+	use devfs
+	want modules
 	need localmount
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	# Setup Kernel Support for miscellaneous Binary Formats
-	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
-		modprobe -q binfmt-misc
+	if [ -d /proc/sys/fs/binfmt_misc ] &&
+		[ ! -e /proc/sys/fs/binfmt_misc/register ]; then
+		if ! grep -qs binfmt_misc /proc/filesystems &&
+			modprobe -q binfmt-misc; then
+			ewarn "The binfmt-misc module needs to be configured in" \
+				"@SYSCONFDIR@/conf.d/modules or built in."
+		fi
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \

init.d/root.in

@@ -14,7 +14,7 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/runsvdir.in

@@ -0,0 +1,20 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2016 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+command=/usr/bin/runsvdir
+command_background=yes
+pidfile=/var/run/runsvdir.pid
+command_args="-P $RC_SVCDIR/sv 'log: ...........................................................................................................................................................................................................................................................................................................................................................................................................'"
+
+start_pre()
+{
+	checkpath -m 0755 -o root:root -d ${RC_SVCDIR}/sv
+}

init.d/savecache.in

@@ -49,7 +49,7 @@ start()
 	fi
 	ebegin "Saving dependency cache"
 	local rc=0 save=
-	for x in deptree depconfig shutdowntime softlevel rc.log; do
+	for x in shutdowntime softlevel rc.log; do
 		[ -e "$RC_SVCDIR/$x" ] && save="$save $RC_SVCDIR/$x"
 	done
 	if [ -n "$save" ]; then

init.d/swap.in

@@ -12,14 +12,13 @@
 depend()
 {
 	before localmount
-	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	ebegin "Activating swap devices"
 	case "$RC_UNAME" in
-		Linux)		swapon -a -e >/dev/null;;
 		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
 		*)		swapon -a >/dev/null;;
 	esac
@@ -29,12 +28,6 @@ start()
 stop()
 {
 	ebegin "Deactivating swap devices"
-
-	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
-	# occur. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
-	cd "$RC_SVCDIR"
-	umount -a -t tmpfs 2>/dev/null
-
 	case "$RC_UNAME" in
 		NetBSD|OpenBSD)	swapctl -U -t noblk >/dev/null;;
 		*)		swapoff -a >/dev/null;;

init.d/swapfiles.in

@@ -1,46 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-depend()
-{
-	need localmount
-	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
-}
-
-start()
-{
-	ebegin "Activating additional swap space"
-	case "$RC_UNAME" in
-		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
-		*)		swapon -a >/dev/null;;
-	esac
-	eend 0 # If swapon has nothing todo it errors, so always return 0
-}
-
-stop()
-{
-	ebegin "Deactivating additional swap space"
-	case "$RC_UNAME" in
-		Linux)
-			if [ -e /proc/swaps ]; then
-				while read filename type rest; do
-					case "$type" in
-						file) swapoff $filename >/dev/null;;
-					esac
-					case "$filename" in
-						/dev/loop*) swapoff $filename >/dev/null;;
-					esac
-				done < /proc/swaps
-			fi
-			;;
-	esac
-	eend 0
-}

init.d/swclock.in

@@ -15,7 +15,7 @@ depend()
 {
 	before *
 	provide clock
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 # swclock is an OpenRC built in

init.d/sysctl.BSD.in

@@ -1,38 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-depend()
-{
-	before bootmisc logger
-	keyword -prefix
-}
-
-start()
-{
-	[ -e /etc/sysctl.conf ] || return 0
-	local retval=0 var= comments= conf=
-	ebegin "Configuring kernel parameters"
-	eindent
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
-			while read var comments; do
-				case "$var" in
-				""|"#"*) continue;;
-				esac
-				sysctl -w "$var" >/dev/null || retval=1
-			done < "$conf"
-			veend $retval
-		fi
-	done
-	eoutdent
-	eend $retval "Some errors were encountered"
-}

init.d/sysctl.GNU.in

@@ -1,39 +0,0 @@
-#!@PREFIX@/sbin/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-#FIXME: Modify for GNU/Hurd
-
-depend()
-{
-	before bootmisc logger
-	keyword -prefix
-}
-
-start()
-{
-	[ -e /etc/sysctl.conf ] || return 0
-	local retval=0 var= comments= conf=
-	ebegin "Configuring kernel parameters"
-	eindent
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
-			while read var comments; do
-				case "$var" in
-				""|"#"*) continue;;
-				esac
-				sysctl -w "$var" >/dev/null || retval=1
-			done < "$conf"
-			veend $retval
-		fi
-	done
-	eoutdent
-	eend $retval "Some errors were encountered"
-}

init.d/sysctl.Linux.in

@@ -1,26 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-depend()
-{
-	before bootmisc logger
-	keyword -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	local quiet
-	yesno $rc_verbose || quiet=-q
-
-	ebegin "Configuring kernel parameters"
-	sysctl ${quiet} --system
-	eend $? "Unable to configure some kernel parameters"
-}

init.d/sysctl.in

@@ -12,14 +12,13 @@
 depend()
 {
 	before bootmisc logger
-	keyword -prefix
+	keyword -prefix -systemd-nspawn -vserver
 }
 
-start()
+BSD_sysctl()
 {
 	[ -e /etc/sysctl.conf ] || return 0
 	local retval=0 var= comments= conf=
-	ebegin "Configuring kernel parameters"
 	eindent
 	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
 		if [ -r "$conf" ]; then
@@ -34,5 +33,25 @@ start()
 		fi
 	done
 	eoutdent
-	eend $retval "Some errors were encountered"
+	return $retval
+}
+
+Linux_sysctl()
+{
+	local quiet
+	yesno $rc_verbose || quiet=-q
+
+	sysctl ${quiet} --system
+}
+
+start()
+{
+	local rc=0
+
+	ebegin "Configuring kernel parameters"
+	case "$RC_UNAME" in
+	*BSD|GNU) BSD_sysctl; rc=$? ;;
+	Linux) Linux_sysctl; rc=$? ;;
+	esac
+	eend $rc "Unable to configure some kernel parameters"
 }

init.d/sysfs.in

@@ -15,7 +15,8 @@ sysfs_opts=nodev,noexec,nosuid
 
 depend()
 {
-	keyword -lxc -prefix -systemd-nspawn -vserver
+	want modules
+	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 mount_sys()
@@ -97,17 +98,23 @@ mount_misc()
 		fi
 	fi
 
-	# setup up kernel support for efivarfs
-	# slightly complicated, as if it's build as a module but NOT yet loaded,
-	# it will NOT appear in /proc/filesystems yet
-	if [ -d /sys/firmware/efi/efivars ] \
-		&& ! mountinfo -q /sys/firmware/efi/efivars; then
-		modprobe -q efivarfs
-		if grep -qs efivarfs /proc/filesystems; then
-			ebegin "Mounting efivarfs filesystem"
-			mount -n -t efivarfs -o ${sysfs_opts} \
-				efivarfs /sys/firmware/efi/efivars
-			eend $?
+	# set up kernel support for efivarfs
+	# The presence of /sys/firmware/efi indicates that the system was
+	# booted in efi mode.
+	if [ -d /sys/firmware/efi ]; then
+		if [ ! -d /sys/firmware/efi/efivars ] &&
+			modprobe -q efivarfs; then
+			ewarn "The efivarfs module needs to be configured in " \
+				  "@SYSCONFDIR@/conf.d/modules or built in"
+		fi
+		if [ -d /sys/firmware/efi/efivars ] &&
+			! mountinfo -q /sys/firmware/efi/efivars; then
+			if grep -qs efivarfs /proc/filesystems; then
+				ebegin "Mounting efivarfs filesystem"
+				mount -n -t efivarfs -o ${sysfs_opts} \
+					efivarfs /sys/firmware/efi/efivars
+				eend $?
+			fi
 		fi
 	fi
 }

init.d/termencoding.in

@@ -16,7 +16,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
-	keyword -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 	use root
 	after bootmisc
 }

init.d/tmpfiles.dev.in

@@ -1,20 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright 1999-2012 Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-description="Set up tmpfiles.d entries"
-
-depend()
-{
-	use dev-mount
-	before dev
-	keyword -prefix -vserver
-}
-
-start()
-{
-	ebegin "Setting up tmpfiles.d entries for /dev"
-	@LIBEXECDIR@/sh/tmpfiles.sh --prefix=/dev --create --boot ${tmpfiles_opts}
-	eend $?
-	return 0
-}

init.d/tmpfiles.setup.in

@@ -1,19 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright 1999-2012 Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-description="Set up tmpfiles.d entries"
-
-depend()
-{
-	need localmount
-}
-
-start()
-{
-	ebegin "Setting up tmpfiles.d entries"
-	@LIBEXECDIR@/sh/tmpfiles.sh --exclude-prefix=/dev --create --remove --boot \
-		${tmpfiles_opts}
-	eend $?
-	return 0
-}

init.d/urandom.in

@@ -15,7 +15,7 @@ description="Initializes the random number generator."
 depend()
 {
 	need localmount
-	keyword -jail -lxc -openvz -prefix -systemd-nspawn
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn
 }
 
 save_seed()

local.d/README

@@ -8,7 +8,7 @@ service is stopped.
 
 All files are processed in lexical order.
 
-Keep in mind that files in this directory are processed sequencially,
+Keep in mind that files in this directory are processed sequentially,
 and the local service is not considered started or stopped until
 everything is processed, so if you have a process which takes a long
 time to run, it can delay your boot or shutdown processing.

man/openrc-run.8

@@ -97,7 +97,7 @@ String describing the extra command.
 .It Ar supervisor
 Supervisor to use to monitor this daemon. If this is unset or invalid,
 start-stop-daemon will be used.
-Currently, we support s6 from scarnet software, and supervise-daemon
+Currently, we support s6 from skarnet software, and supervise-daemon
 which is a light-weight supervisor internal to OpenRC.
 To use s6, set
 supervisor=s6.
@@ -125,15 +125,35 @@ if no start or stop function is defined by the service.
 .It Ar command_args
 List of arguments to pass to the daemon when starting via
 .Nm start-stop-daemon .
+.It Ar command_args_background
+This variable should be used if the daemon you are starting with
+.Xr start-stop-daemon 8
+runs in the foreground by default but has its own command line options
+to request that it background and write a pid file. It should be set to
+those options. It should not be used at the same time as
+command_background, because command_background requests that
+.Xr start-stop-daemon 8
+go into the background before executing the daemon.
 .It Ar command_args_foreground
 List of arguments to pass to the daemon when starting via
 .Nm supervise-daemon .
 to force the daemon to stay in the foreground
 .It Ar command_background
-Set this to "true", "yes" or "1" (case-insensitive) to force the daemon into
-the background. This implies the "--make-pidfile" and "--pidfile" option of
+Set this to "true", "yes" or "1" (case-insensitive) if you want 
 .Xr start-stop-daemon 8
-so the pidfile variable must be set.
+to force the daemon into the background. This forces the
+"--make-pidfile" and "--pidfile" options, so the pidfile variable must be set.
+.It Ar command_progress
+Set this to "true", "yes" or "1" (case-insensitive) if you want 
+.Xr start-stop-daemon 8
+to display a progress meter when waiting for a daemon to stop.
+.It Ar command_user
+If the daemon does not support changing to a different user id, you can
+use this to change the user id before
+.Xr start-stop-daemon 8
+or
+.Xr supervise-daemon 8
+launches the daemon
 .It Ar chroot
 .Xr start-stop-daemon 8
 and
@@ -143,6 +163,8 @@ will chroot into this path before writing the pid file or starting the daemon.
 Pidfile to use for the above defined command.
 .It Ar name
 Display name used for the above defined command.
+.It Ar procname
+Process name to match when signaling the daemon.
 .It Ar stopsig
 Signal to send when stopping the daemon.
 .It Ar retry
@@ -158,6 +180,10 @@ used along with in_background_fake to support re-entrant services.
 .It Ar in_background_fake
 Space separated list of commands which should always succeed when
 in_background is yes.
+.Pp
+Keep in mind that eval is used to process chroot, command, command_args_*,
+command_user, pidfile and procname. This may affect how they are
+evaluated depending on how they are quoted.
 .El
 .Sh DEPENDENCIES
 You should define a

man/rc-status.8

@@ -33,6 +33,8 @@ Show all runlevels and their services.
 List all services that have crashed.
 .It Fl l , -list
 List all defined runlevels.
+.It Fl m , -manual
+Show all manually started services.
 .It Fl r , -runlevel
 Print the current runlevel name.
 .It Fl s , -servicelist

man/start-stop-daemon.8

@@ -55,7 +55,7 @@ is used.
 .It Fl p , -pidfile Ar pidfile
 When starting, we expect the daemon to create a valid
 .Ar pidfile
-within a reasonable amount of time. When stopping we only stop the pid(s)
+within a reasonable amount of time. When stopping we only stop the first pid
 listed in the
 .Ar pidfile .
 .It Fl n , -name Ar name
@@ -153,6 +153,10 @@ The retry specification can be either a timeout in seconds or multiple
 signal/timeout pairs (like SIGTERM/5).
 .El
 .Sh ENVIRONMENT
+.Va SSD_IONICELEVEL
+can also set the IO scheduling priority of the daemon, but the command line
+option takes precedence.
+.Pp
 .Va SSD_NICELEVEL
 can also set the scheduling priority of the daemon, but the command line
 option takes precedence.

mk/dist.mk

@@ -11,9 +11,9 @@
 
 GITREF?=	${VERSION}
 DISTPREFIX?=	${NAME}-${VERSION}
-DISTFILE?=	${DISTPREFIX}.tar.bz2
+DISTFILE?=	${DISTPREFIX}.tar.gz
 
-CLEANFILES+=	${NAME}-*.tar.bz2
+CLEANFILES+=	${NAME}-*.tar.gz
 
 CHANGELOG_LIMIT?= --after="1 year ago"
 
@@ -21,13 +21,13 @@ _SNAP_SH=	date -u +%Y%m%d%H%M
 _SNAP:=		$(shell ${_SNAP_SH})
 SNAP=		${_SNAP}
 SNAPDIR=	${DISTPREFIX}-${SNAP}
-SNAPFILE=	${SNAPDIR}.tar.bz2
+SNAPFILE=	${SNAPDIR}.tar.gz
 
 changelog:
 	git log ${CHANGELOG_LIMIT} --format=full > ChangeLog
 
 dist:
-	git archive --prefix=${DISTPREFIX}/ ${GITREF} | bzip2 > ${DISTFILE}
+	git archive --prefix=${DISTPREFIX}/ ${GITREF} --output=${DISTFILE}
 
 distcheck: dist
 	rm -rf ${DISTPREFIX}
@@ -42,7 +42,7 @@ snapshot:
 	cp -RPp * /tmp/${SNAPDIR}
 	(cd /tmp/${SNAPDIR}; make clean)
 	rm -rf /tmp/${SNAPDIR}/.git 2>/dev/null || true
-	tar -cvjpf ${SNAPFILE} -C /tmp ${SNAPDIR}
+	tar -cvzpf ${SNAPFILE} -C /tmp ${SNAPDIR}
 	rm -rf /tmp/${SNAPDIR}
 	ls -l ${SNAPFILE}
 

mk/os-prefix.mk

@@ -3,4 +3,6 @@
 
 ifeq (${MKPREFIX},yes)
 CPPFLAGS+=	-DPREFIX
+PKG_PREFIX?=	$(PREFIX)/usr
+SED_EXTRA=	-e '/_PATH=.*usr.bin/d'
 endif

mk/os.mk

@@ -13,7 +13,7 @@
 _OS_SH=		uname -s | tr '/' '-'
 _OS:= 		$(shell ${_OS_SH})
 OS?= 		${_OS}
-include ${MK}/os-${OS}.mk
 include ${MK}/os-prefix.mk
+include ${MK}/os-${OS}.mk
 
 RC_LIB=		/$(LIBNAME)/rc

mk/sys.mk

@@ -11,6 +11,7 @@
 
 AR?=			ar
 CP?=			cp
+PKG_CONFIG?=	pkg-config
 ECHO?=			echo
 INSTALL?=		install
 RANLIB?=		ranlib
@@ -26,7 +27,7 @@ ifeq (${MKPREFIX},yes)
 UPREFIX= ${PREFIX}/usr
 endif
 endif
-LOCAL_PREFIX=		/usr/local
+LOCAL_PREFIX=		$(UPREFIX)/local
 
 PICFLAG?=		-fPIC
 

mk/termcap.mk

@@ -1,6 +1,6 @@
 ifeq (${MKTERMCAP},ncurses)
-TERMCAP_CFLAGS:=	$(shell pkg-config ncurses --cflags 2> /dev/null)
-LTERMCAP:=			$(shell pkg-config ncurses --libs 2> /dev/null)
+TERMCAP_CFLAGS:=	$(shell ${PKG_CONFIG} ncurses --cflags 2> /dev/null)
+LTERMCAP:=			$(shell ${PKG_CONFIG} ncurses --libs 2> /dev/null)
 ifeq ($(LTERMCAP),)
 LIBTERMCAP?=	-lncurses
 else

runit-guide.md

@@ -0,0 +1,41 @@
+# Using runit with OpenRC
+
+Beginning with OpenRC-0.21, we support using runit [1] in place of
+start-stop-daemon for monitoring and restarting daemons.
+
+## Setup
+
+Documenting runit in detail is beyond the scope of this guide. It will
+document how to set up OpenRC services to communicate with runit.
+
+### Use Default start, stop and status functions
+
+If you write your own start, stop and status functions in your service
+script, none of this will work. You must allow OpenRC to use the default
+functions.
+
+### Dependencies
+
+All OpenRC service scripts that want their daemons monitored by runit
+should have the following line added to their dependencies to make sure
+the runit scan directory is being monitored.
+
+need runsvdir
+
+### Variable Settings
+
+The most important setting is the supervisor variable. At the top of
+your service script, you should set this variable as follows:
+
+supervisor=runit
+
+The second variable you need is runit_service. This is the path to the
+runit service you wish to control via OpenRC. The default is
+/etc/sv/${RC_SVCNAME}. This means that for an OpenRC service
+/etc/init.d/foo, you will need to create the same runit service in
+/etc/sv/foo.
+
+This is very early support, so feel free to file bugs if you have
+issues.
+
+[1] http://www.smarden.org/runit

runlevels/Makefile

@@ -1,7 +1,7 @@
 include ../mk/net.mk
 
 BOOT=		bootmisc fsck hostname localmount loopback \
-		root swap swapfiles sysctl urandom ${BOOT-${OS}}
+		root swap sysctl urandom ${BOOT-${OS}}
 DEFAULT=	local netmount
 NONETWORK=	local
 SHUTDOWN=	savecache ${SHUTDOWN-${OS}}
@@ -32,14 +32,13 @@ SYSINIT-${OS}=
 BOOT-BSD=	hostid newsyslog savecore syslogd swap-blk
 
 # Generic BSD stuff
-BOOT-FreeBSD+=	hostid newsyslog savecore syslogd
+BOOT-FreeBSD+=	hostid modules newsyslog savecore syslogd
 # FreeBSD specific stuff
 BOOT-FreeBSD+=	adjkerntz dumpon syscons
 
-BOOT-Linux+=	binfmt hwclock keymaps modules mtab procfs termencoding \
-	tmpfiles.setup
+BOOT-Linux+=	binfmt hwclock keymaps modules mtab procfs termencoding
 SHUTDOWN-Linux=	killprocs mount-ro
-SYSINIT-Linux=	devfs dmesg sysfs tmpfiles.dev
+SYSINIT-Linux=	devfs dmesg sysfs
 
 # Generic BSD stuff
 BOOT-NetBSD+=	hostid newsyslog savecore syslogd

s6-guide.md

@@ -1,7 +1,7 @@
 # Using S6 with OpenRC
 
 Beginning with OpenRC-0.16, we support using the s6 supervision suite
-from Skarmet Software in place of start-stop-daemon for monitoring
+from Skarnet Software in place of start-stop-daemon for monitoring
 daemons [1].
 
 ## Setup

sh/.gitignore

@@ -6,6 +6,5 @@ cgroup-release-agent.sh
 init.sh
 init-early.sh
 rc-cgroup.sh
-tmpfiles.sh
 migrate-to-run.sh
 binfmt.sh

sh/Makefile

@@ -1,9 +1,9 @@
 DIR=	${LIBEXECDIR}/sh
 SRCS=	init.sh.in functions.sh.in gendepends.sh.in \
-	openrc-run.sh.in rc-functions.sh.in tmpfiles.sh.in ${SRCS-${OS}}
-INC=	functions.sh rc-mount.sh rc-functions.sh s6.sh start-stop-daemon.sh \
-		supervise-daemon.sh
-BIN=	gendepends.sh init.sh openrc-run.sh tmpfiles.sh ${BIN-${OS}}
+	openrc-run.sh.in rc-functions.sh.in ${SRCS-${OS}}
+INC=	rc-mount.sh functions.sh rc-functions.sh runit.sh s6.sh \
+		start-stop-daemon.sh supervise-daemon.sh
+BIN=	gendepends.sh init.sh openrc-run.sh ${BIN-${OS}}
 
 INSTALLAFTER=	_installafter
 

sh/init.sh.BSD.in

@@ -57,7 +57,7 @@ case "$(openrc --sys)" in
 esac
 retval=$?
 
-if [ -e "$RC_LIBEXECDIR"/cache/deptree ]; then
+if [ -e "$RC_LIBEXECDIR"/cache/softlevel ]; then
 	cp -p "$RC_LIBEXECDIR"/cache/* "$RC_SVCDIR" 2>/dev/null
 fi
 

sh/init.sh.GNU-kFreeBSD.in

@@ -34,7 +34,7 @@ ebegin "Creating $RC_SVCDIR"
 mkdir -p $RC_SVCDIR
 eend $?
 
-if [ -e "$RC_LIBEXECDIR"/cache/deptree ]; then
+if [ -e "$RC_LIBEXECDIR"/cache/softlevel ]; then
     cp -p "$RC_LIBEXECDIR"/cache/* "$RC_SVCDIR" 2>/dev/null
 fi
 

sh/init.sh.GNU.in

@@ -36,7 +36,7 @@ ebegin "Creating $RC_SVCDIR"
 mkdir -p $RC_SVCDIR
 eend $?
 
-if [ -e "$RC_LIBEXECDIR"/cache/deptree ]; then
+if [ -e "$RC_LIBEXECDIR"/cache/softlevel ]; then
     cp -p "$RC_LIBEXECDIR"/cache/* "$RC_SVCDIR" 2>/dev/null
 fi
 

sh/init.sh.Linux.in

@@ -11,6 +11,16 @@ if [ -d "@SYSCONFDIR@/rc.conf.d" ]; then
 	done
 fi
 
+# check for md5sum, and probably /usr too
+if command -v md5sum >/dev/null; then
+	got_md5sum=true
+else
+	eerror "md5sum is missing, which suggests /usr is not mounted"
+	eerror "If you have separate /usr, it must be mounted by initramfs"
+	eerror "If not, you should check coreutils is installed correctly"
+	got_md5sum=false
+fi
+
 # By default VServer already has /proc mounted, but OpenVZ does not!
 # However, some of our users have an old proc image in /proc
 # NFC how they managed that, but the end result means we have to test if
@@ -21,9 +31,12 @@ fi
 mountproc=true
 f=/proc/self/environ
 if [ -e $f ]; then
-	if [ "$(VAR=a cat $f)" = "$(VAR=b cat $f)" ]; then
+	if $got_md5sum && [ "$(VAR=a md5sum $f)" = "$(VAR=b md5sum $f)" ]; then
 		eerror "You have cruft in /proc that should be deleted"
 	else
+		# If they don't have md5sum, this will fail in pretty ways if
+		# /proc isn't really mounted.  Oh well, their system is busted
+		# anyway, and they get to keep the pieces.
 		einfo "/proc is already mounted"
 		mountproc=false
 	fi
@@ -31,11 +44,9 @@ fi
 unset f
 
 if $mountproc; then
-	procfs="proc"
-	[ "$RC_UNAME" = "GNU/kFreeBSD" ] && proc="linprocfs"
 	ebegin "Mounting /proc"
 	if ! fstabinfo --mount /proc; then
-		mount -n -t "$procfs" -o noexec,nosuid,nodev proc /proc
+		mount -n -t proc -o noexec,nosuid,nodev proc /proc
 	fi
 	eend $?
 fi
@@ -85,7 +96,7 @@ if grep -Eq "[[:space:]]+xenfs$" /proc/filesystems; then
 	eend $?
 fi
 
-if [ -e "$RC_LIBEXECDIR"/cache/deptree ]; then
+if [ -e "$RC_LIBEXECDIR"/cache/softlevel ]; then
 	cp -p "$RC_LIBEXECDIR"/cache/* "$RC_SVCDIR" 2>/dev/null
 fi
 

sh/openrc-run.sh.in

@@ -146,13 +146,13 @@ _status()
 	fi
 }
 
-# Template start / stop / status functions
 # These functions select the appropriate function to call from the
 # supervisor modules
-start()
+default_start()
 {
 	local func=ssd_start
 	case "$supervisor" in
+		runit) func=runit_start ;;
 		s6) func=s6_start ;;
 		supervise-daemon) func=supervise_start ;;
 		?*)
@@ -162,10 +162,11 @@ start()
 	$func
 }
 
-stop()
+default_stop()
 {
 	local func=ssd_stop
 	case "$supervisor" in
+		runit) func=runit_stop ;;
 		s6) func=s6_stop ;;
 		supervise-daemon) func=supervise_stop ;;
 		?*)
@@ -175,10 +176,11 @@ stop()
 	$func
 }
 
-status()
+default_status()
 {
 	local func=ssd_status
 	case "$supervisor" in
+		runit) func=runit_status ;;
 		s6) func=s6_status ;;
 		supervise-daemon) func=supervise_status ;;
 		?*)
@@ -188,8 +190,37 @@ status()
 	$func
 }
 
+# Template start / stop / status functions
+# package init scripts may override these, but the bodies are as minimal as
+# possible, so that the init scripts can creatively wrap default_*
+# functions.
+start()
+{
+	default_start
+}
+
+stop()
+{
+	default_stop
+}
+
+status()
+{
+	default_status
+}
+
+# Start debug output
 yesno $RC_DEBUG && set -x
 
+# Load configuration settings. First the global ones, then any
+# service-specific settings.
+sourcex -e "@SYSCONFDIR@/rc.conf"
+if [ -d "@SYSCONFDIR@/rc.conf.d" ]; then
+	for _f in "@SYSCONFDIR@"/rc.conf.d/*.conf; do
+		sourcex -e "$_f"
+	done
+fi
+
 _conf_d=${RC_SERVICE%/*}/../conf.d
 # If we're net.eth0 or openvpn.work then load net or openvpn config
 _c=${RC_SVCNAME%%.*}
@@ -206,16 +237,8 @@ if ! sourcex -e "$_conf_d/$RC_SVCNAME.$RC_RUNLEVEL"; then
 fi
 unset _conf_d
 
-# Load any system overrides
-sourcex -e "@SYSCONFDIR@/rc.conf"
-if [ -d "@SYSCONFDIR@/rc.conf.d" ]; then
-	for _f in "@SYSCONFDIR@"/rc.conf.d/*.conf; do
-		sourcex -e "$_f"
-	done
-fi
-
-
 # load service supervisor functions
+sourcex "@LIBEXECDIR@/sh/runit.sh"
 sourcex "@LIBEXECDIR@/sh/s6.sh"
 sourcex "@LIBEXECDIR@/sh/start-stop-daemon.sh"
 sourcex "@LIBEXECDIR@/sh/supervise-daemon.sh"

sh/rc-cgroup.sh.in

@@ -53,7 +53,7 @@ cgroup_set_values()
 	while [ -n "$1" -a "$controller" != "cpuacct" ]; do
 		case "$1" in
 			$controller.*)
-				if [ -n "$name" -a -f "$cgroup/$name" -a -n "$val" ]; then
+				if [ -n "$name" -a -w "$cgroup/$name" -a -n "$val" ]; then
 					veinfo "$RC_SVCNAME: Setting $cgroup/$name to $val"
 					printf "%s" "$val" > "$cgroup/$name"
 				fi
@@ -68,12 +68,12 @@ cgroup_set_values()
 		esac
 		shift
 	done
-	if [ -n "$name" -a -f "$cgroup/$name" -a -n "$val" ]; then
+	if [ -n "$name" -a -w "$cgroup/$name" -a -n "$val" ]; then
 		veinfo "$RC_SVCNAME: Setting $cgroup/$name to $val"
 		printf "%s" "$val" > "$cgroup/$name"
 	fi
 
-	if [ -f "$cgroup/tasks" ]; then
+	if [ -w "$cgroup/tasks" ]; then
 		veinfo "$RC_SVCNAME: adding to $cgroup/tasks"
 		printf "%d" 0 > "$cgroup/tasks"
 	fi
@@ -88,14 +88,14 @@ cgroup_add_service()
     # cgroups. But may lead to a problems where that inheriting
     # is needed.
 	for d in /sys/fs/cgroup/* ; do
-		[ -f "${d}"/tasks ] && printf "%d" 0 > "${d}"/tasks
+		[ -w "${d}"/tasks ] && printf "%d" 0 > "${d}"/tasks
 	done
 
 	openrc_cgroup=/sys/fs/cgroup/openrc
 	if [ -d "$openrc_cgroup" ]; then
 		cgroup="$openrc_cgroup/$RC_SVCNAME"
 		mkdir -p "$cgroup"
-		[ -f "$cgroup/tasks" ] && printf "%d" 0 > "$cgroup/tasks"
+		[ -w "$cgroup/tasks" ] && printf "%d" 0 > "$cgroup/tasks"
 	fi
 }
 

sh/runit.sh

@@ -0,0 +1,52 @@
+# Copyright (c) 2016 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+#    except according to the terms contained in the LICENSE file.
+# Released under the 2-clause BSD license.
+
+runit_start()
+{
+	local service_path service_link
+	service_path="${runit_service:-/etc/sv/${RC_SVCNAME}}"
+	if [ ! -d "${service_path}" ]; then
+		eerror "Runit service ${service_path} not found"
+		return 1
+	fi
+	service_link="${RC_SVCDIR}/sv/${service_path##*/}"
+	ebegin "Starting ${name:-$RC_SVCNAME}"
+	ln -snf "${service_path}" "${service_link}"
+	sv start "${service_link}" > /dev/null 2>&1
+	eend $? "Failed to start ${name:-$RC_SVCNAME}"
+}
+
+runit_stop()
+{
+	local service_path service_link
+	service_path="${runit_service:-/etc/sv/${RC_SVCNAME}}"
+	if [ ! -d "${service_path}" ]; then
+		eerror "Runit service ${service_path} not found"
+		return 1
+	fi
+	service_link="${RC_SVCDIR}/sv/${service_path##*/}"
+	ebegin "Stopping ${name:-$RC_SVCNAME}"
+	sv stop "${service_link}" > /dev/null 2>&1 &&
+	rm "${service_link}"
+	eend $? "Failed to stop ${name:-$RC_SVCNAME}"
+}
+
+runit_status()
+{
+	local service_path service_link
+	service_path="${runit_service:-/etc/sv/${RC_SVCNAME}}"
+	if [ ! -d "${service_path}" ]; then
+		eerror "Runit service ${service_path} not found"
+		return 1
+	fi
+	service_link="${RC_SVCDIR}/sv/${service_path##*/}"
+	sv status "${service_link}"
+}

sh/s6.sh

@@ -30,7 +30,7 @@ s6_start()
 	sleep 1.5
 	set -- $(s6-svstat "${s6_service_link}")
 	[ "$1" = "up" ]
-	eend $? "Failed to start $RC_SVCNAME"
+	eend $? "Failed to start ${name:-$RC_SVCNAME}"
 }
 
 s6_stop()
@@ -44,7 +44,7 @@ s6_stop()
 	s6-svc -wD -d -T ${s6_service_timeout_stop:-10000} "${s6_service_link}"
 	set -- $(s6-svstat "${s6_service_link}")
 	[ "$1" = "down" ]
-	eend $? "Failed to stop $RC_SVCNAME"
+	eend $? "Failed to stop ${name:-$RC_SVCNAME}"
 }
 
 s6_status()

sh/start-stop-daemon.sh

@@ -38,6 +38,9 @@ ssd_start()
 		service_inactive && _inactive=true
 		mark_service_inactive
 	fi
+	#the eval call is necessary for cases like:
+	# command_args="this \"is a\" test"
+	# to work properly.
 	eval start-stop-daemon --start \
 		--exec $command \
 		${chroot:+--chroot} $chroot \
@@ -46,7 +49,7 @@ ssd_start()
 		${command_user+--user} $command_user \
 		$_background $start_stop_daemon_args \
 		-- $command_args $command_args_background
-	if eend $? "Failed to start $RC_SVCNAME"; then
+	if eend $? "Failed to start ${name:-$RC_SVCNAME}"; then
 		service_set_value "command" "${command}"
 		[ -n "${chroot}" ] && service_set_value "chroot" "${chroot}"
 		[ -n "${pidfile}" ] && service_set_value "pidfile" "${pidfile}"
@@ -63,6 +66,7 @@ ssd_start()
 
 ssd_stop()
 {
+	local _progress=
 	local startcommand="$(service_get_value "command")"
 	local startchroot="$(service_get_value "chroot")"
 	local startpidfile="$(service_get_value "pidfile")"
@@ -72,15 +76,17 @@ ssd_stop()
 	pidfile="${startpidfile:-$pidfile}"
 	procname="${startprocname:-$procname}"
 	[ -n "$command" -o -n "$procname" -o -n "$pidfile" ] || return 0
+	yesno "${command_progress}" && _progress=--progress
 	ebegin "Stopping ${name:-$RC_SVCNAME}"
 	start-stop-daemon --stop \
 		${retry:+--retry} $retry \
 		${command:+--exec} $command \
 		${procname:+--name} $procname \
 		${pidfile:+--pidfile} $chroot$pidfile \
-		${stopsig:+--signal} $stopsig
+		${stopsig:+--signal} $stopsig \
+		${_progress}
 
-	eend $? "Failed to stop $RC_SVCNAME"
+	eend $? "Failed to stop ${name:-$RC_SVCNAME}"
 }
 
 ssd_status()

sh/supervise-daemon.sh

@@ -19,6 +19,9 @@ supervise_start()
 	fi
 
 	ebegin "Starting ${name:-$RC_SVCNAME}"
+	# The eval call is necessary for cases like:
+	# command_args="this \"is a\" test"
+	# to work properly.
 	eval supervise-daemon --start \
 		${chroot:+--chroot} $chroot \
 		${pidfile:+--pidfile} $pidfile \
@@ -31,7 +34,7 @@ supervise_start()
 		[ -n "${chroot}" ] && service_set_value "chroot" "${chroot}"
 		[ -n "${pidfile}" ] && service_set_value "pidfile" "${pidfile}"
 	fi
-	eend $rc "failed to start $RC_SVCNAME"
+	eend $rc "failed to start ${name:-$RC_SVCNAME}"
 }
 
 supervise_stop()
@@ -46,7 +49,7 @@ supervise_stop()
 		${pidfile:+--pidfile} $chroot$pidfile \
 		${stopsig:+--signal} $stopsig
 
-	eend $? "Failed to stop $RC_SVCNAME"
+	eend $? "Failed to stop ${name:-$RC_SVCNAME}"
 }
 
 supervise_status()

sh/tmpfiles.sh.in

@@ -1,395 +0,0 @@
-#!/bin/sh
-# This is a reimplementation of the systemd tmpfiles.d code
-# Control creation, deletion, and cleaning of volatile and temporary files
-#
-# Copyright (c) 2012 Gentoo Foundation
-# Released under the 2-clause BSD license.
-#
-# This instance is a pure-POSIX sh version, written by Robin H Johnson
-# <robbat2@gentoo.org>, based on the Arch Linux version as of 2012/01/01:
-# http://projects.archlinux.org/initscripts.git/tree/arch-tmpfiles
-#
-# See the tmpfiles.d manpage as well:
-# http://0pointer.de/public/systemd-man/tmpfiles.d.html
-# This script should match the manpage as of 2012/03/12
-#
-
-DRYRUN=0
-CHECKPATH="@LIBEXECDIR@/bin/checkpath"
-
-checkprefix() {
-	n=$1
-	shift
-	for x in $@; do
-		case $n in
-			${x}*) return 0 ;;
-	esac
-	done
-	return 1
-}
-
-warninvalid() {
-	printf "tmpfiles: ignoring invalid entry on line %d of \`%s'\n" "$LINENUM" "$FILE"
-	error=$(( error+1 ))
-} >&2
-
-dryrun_or_real() {
-	local dryrun=
-	[ $DRYRUN -eq 1 ] && dryrun=echo
-	$dryrun "$@"
-}
-
-relabel() {
-	local path
-	local paths=$1 mode=$2 uid=$3 gid=$4
-
-	for path in ${paths}; do
-		if [ -e "$path" ]; then
-			[ -x /sbin/restorecon ] && dryrun_or_real restorecon $CHOPTS "$path"
-			[ $uid != '-' ] && dryrun_or_real chown $CHOPTS "$uid" "$path"
-			[ $gid != '-' ] && dryrun_or_real chgrp $CHOPTS "$gid" "$path"
-			[ $mode != '-' ] && dryrun_or_real chmod $CHOPTS "$mode" "$path"
-		fi
-	done
-}
-
-splitpath() {
-    local path=$1
-    while [ -n "$path" ]; do
-        echo $path
-        path=${path%/*}
-    done
-}
-
-_restorecon() {
-    local path=$1
-    if [ -x /sbin/restorecon ]; then
-        dryrun_or_real restorecon -F $(splitpath "$path")
-    fi
-}
-
-_b() {
-	# Create a block device node if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-	if [ ! -e "$path" ]; then
-		dryrun_or_real mknod -m $mode $path b ${arg%:*} ${arg#*:}
-		_restorecon "$path"
-		dryrun_or_real chown $uid:$gid $path
-	fi
-}
-
-_c() {
-	# Create a character device node if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-	if [ ! -e "$path" ]; then
-		dryrun_or_real mknod -m $mode $path c ${arg%:*} ${arg#*:}
-		_restorecon "$path"
-		dryrun_or_real chown $uid:$gid $path
-	fi
-}
-
-_C() {
-	# recursively copy a file or directory
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-	if [ ! -e "$path" ]; then
-		dryrun_or_real cp -r "$arg" "$path"
-		_restorecon "$path"
-		[ $uid != '-' ] && dryrun_or_real chown "$uid" "$path"
-		[ $gid != '-' ] && dryrun_or_real chgrp "$gid" "$path"
-		[ $mode != '-' ] && dryrun_or_real chmod "$mode" "$path"
-	fi
-}
-
-_f() {
-	# Create a file if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-
-	[ $CREATE -gt 0 ] || return 0
-
-	if [ ! -e "$path" ]; then
-		dryrun_or_real $CHECKPATH -fq -m "$mode" -o "$uid:$gid" "$path"
-		[ -z "$arg" ] || _w "$@"
-	fi
-}
-
-_F() {
-	# Create or truncate a file
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-
-	[ $CREATE -gt 0 ] || return 0
-
-	dryrun_or_real $CHECKPATH -Fq -m "$mode" -o "$uid:$gid" "$path"
-	[ -z "$arg" ] || _w "$@"
-}
-
-_d() {
-	# Create a directory if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4
-
-	[ $CREATE -gt 0 ] || return 0
-
-	if [ ! -d "$path" ]; then
-		dryrun_or_real mkdir -p "$path" 2>/dev/null
-		_restorecon "$path"
-		dryrun_or_real $CHECKPATH -dq -m "$mode" -o "$uid:$gid" "$path"
-	fi
-}
-
-_D() {
-	# Create or empty a directory
-	local path=$1 mode=$2 uid=$3 gid=$4
-
-	if [ -d "$path" ] && [ $REMOVE -gt 0 ]; then
-		dryrun_or_real find "$path" -mindepth 1 -maxdepth 1 -xdev -exec rm -rf {} +
-		_restorecon "$path"
-	fi
-
-	if [ $CREATE -gt 0 ]; then
-		dryrun_or_real mkdir -p "$path" 2>/dev/null
-		_restorecon "$path"
-		dryrun_or_real $CHECKPATH -Dq -m "$mode" -o "$uid:$gid" "$path"
-	fi
-}
-
-_v() {
-	# Create a subvolume if the path does not exist yet and the file system
-	# supports this (btrfs). Otherwise create a normal directory.
-	# TODO: Implement btrfs subvol creation.
-	_d "$@"
-}
-
-_L() {
-	# Create a symlink if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-	[ ! -e "$path" ] && dryrun_or_real ln -s "$arg" "$path"
-	_restorecon "$path"
-}
-
-_p() {
-	# Create a named pipe (FIFO) if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4
-
-	[ $CREATE -gt 0 ] || return 0
-
-	if [ ! -p "$path" ]; then
-		dryrun_or_real $CHECKPATH -pq -m $mode -o "$uid:$gid" "$path"
-	fi
-}
-
-_x() {
-	# Ignore a path during cleaning. Use this type to exclude paths from clean-up as
-	# controlled with the Age parameter. Note that lines of this type do not
-	# influence the effect of r or R lines. Lines of this type accept shell-style
-	# globs in place of of normal path names.
-	:
-	# XXX: we don't implement this
-}
-
-_X() {
-	# Ignore a path during cleanup. Use this type to prevent path
-	# removal as controled with the age parameter. Note that if path is
-	# a directory, the content of the directory is not excluded from
-	# clean-up, only the directory itself.
-	# Lines of this type accept shell-style globs in place of normal path names.
-	:
-	# XXX: we don't implement this
-}
-
-_r() {
-	# Remove a file or directory if it exists. This may not be used to remove
-	# non-empty directories, use R for that. Lines of this type accept shell-style
-	# globs in place of normal path names.
-	local path
-	local paths=$1
-
-	[ $REMOVE -gt 0 ] || return 0
-
-	for path in ${paths}; do
-		if [ -f "$path" ]; then
-			dryrun_or_real rm -f "$path"
-		elif [ -d "$path" ]; then
-			dryrun_or_real rmdir "$path"
-		fi
-	done
-}
-
-_R() {
-	# Recursively remove a path and all its subdirectories (if it is a directory).
-	# Lines of this type accept shell-style globs in place of normal path names.
-	local path
-	local paths=$1
-
-	[ $REMOVE -gt 0 ] || return 0
-
-	for path in ${paths}; do
-		[ -d "$path" ] && dryrun_or_real rm -rf --one-file-system "$path"
-	done
-}
-
-_w() {
-	# Write the argument parameter to a file, if it exists.
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-	if [ -f "$path" ]; then
-		if [ $DRYRUN -eq 1 ]; then
-			echo "echo \"$arg\" >>\"$path\""
-		else
-			echo "$arg" >>"$path"
-		fi
-	fi
-}
-
-_z() {
-	# Set ownership, access mode and relabel security context of a file or
-	# directory if it exists. Lines of this type accept shell-style globs in
-	# place of normal path names.
-	[ $CREATE -gt 0 ] || return 0
-
-	relabel "$@"
-}
-
-_Z() {
-	# Recursively set ownership, access mode and relabel security context of a
-	# path and all its subdirectories (if it is a directory). Lines of this type
-	# accept shell-style globs in place of normal path names.
-	[ $CREATE -gt 0 ] || return 0
-
-	CHOPTS=-R relabel "$@"
-}
-
-BOOT=0 CREATE=0 REMOVE=0 CLEAN=0 VERBOSE=0 DRYRUN=0 error=0 LINENO=0
-EXCLUDE=
-PREFIX=
-FILE=
-fragments=
-# XXX: The harcoding of /usr/lib/ is an explicit choice by upstream
-tmpfiles_dirs='/usr/lib/tmpfiles.d/ /run/tmpfiles.d/ /etc/tmpfiles.d/'
-tmpfiles_basenames=''
-tmpfiles_d=''
-# Build a list of sorted unique basenames
-# directories declared later in the tmpfiles_d array will override earlier
-# directories, on a per file basename basis.
-# `/etc/tmpfiles.d/foo.conf' supersedes `/usr/lib/tmpfiles.d/foo.conf'.
-# `/run/tmpfiles/foo.conf' will always be read after `/etc/tmpfiles.d/bar.conf'
-for d in ${tmpfiles_dirs} ; do
-	[ -d $d ] && for f in ${d}/*.conf ; do
-		case "${f##*/}" in
-			systemd.conf|systemd-*.conf) continue;;
-		esac
-		[ -f $f ] && tmpfiles_basenames="${tmpfiles_basenames}\n${f##*/}"
-	done # for f in ${d}
-done # for d in ${tmpfiles_dirs}
-tmpfiles_basenames="$(printf "${tmpfiles_basenames}\n" | sort -u )"
-
-for b in $tmpfiles_basenames ; do
-	real_f=''
-	for d in $tmpfiles_dirs ; do
-		f=${d}/${b}
-		[ -f "${f}" ] && real_f=$f
-	done
-	[ -f "${real_f}" ] && tmpfiles_d="${tmpfiles_d} ${real_f}"
-done
-
-while [ $# -gt 0 ]; do
-	case $1 in
-		--boot) BOOT=1 ;;
-		--create) CREATE=1 ;;
-		--remove) REMOVE=1 ;;
-		--clean) CLEAN=1 ;; # TODO: Not implemented
-		--verbose) VERBOSE=1 ;;
-		--dryrun|--dry-run) DRYRUN=1 ;;
-		--exclude-prefix=*) EXCLUDE="${EXCLUDE}${1##--exclude-prefix=} " ;;
-		--prefix=*) PREFIX="${PREFIX}${1##--prefix=} " ;;
-	esac
-	shift
-done
-
-if [ $(( CLEAN )) -eq 1 ] ; then
-	printf '%s clean mode is not implemented\n' "${0##*/}"
-	exit 1
-fi
-
-if [ "$CREATE$REMOVE" = '00' ]; then
-	printf 'usage: %s [--exclude-prefix=path] [--prefix=path] [--boot] [--create] [--remove] [--clean] [--verbose] [--dry-run]\n' "${0##*/}"
-	exit 1
-fi
-
-error=0
-
-# loop through the gathered fragments, sorted globally by filename.
-# `/run/tmpfiles/foo.conf' will always be read after `/etc/tmpfiles.d/bar.conf'
-for FILE in $tmpfiles_d ; do
-	LINENUM=0
-
-	### FILE FORMAT ###
-	# XXX: We ignore the 'Age' parameter
-	# 1    2              3    4    5    6   7
-	# Cmd  Path           Mode UID  GID  Age Argument
-	# d    /run/user      0755 root root 10d -
-	# Mode, UID, GID, Age, Argument may be omitted!
-	# If Cmd ends with !, the line is only processed if --boot is passed
-
-	# XXX: Upstream says whitespace is NOT permitted in the Path argument.
-	# But IS allowed when globs are expanded for the x/r/R/z/Z types.
-	while read cmd path mode uid gid age arg; do
-		LINENUM=$(( LINENUM+1 ))
-		FORCE=0
-
-		# Unless we have both command and path, skip this line.
-		if [ -z "$cmd" -o -z "$path" ]; then
-			continue
-		fi
-
-		case $cmd in
-			\#*) continue ;;
-		esac
-
-		while [ ${#cmd} -gt 1 ]; do
-			case $cmd in
-				*!) cmd=${cmd%!}; [ "$BOOT" -eq "1" ] || continue 2 ;;
-				*+) cmd=${cmd%+}; FORCE=1; ;;
-				*) warninvalid ; continue 2 ;;
-			esac
-		done
-
-		# whine about invalid entries
-		case $cmd in
-			f|F|w|d|D|v|p|L|c|C|b|x|X|r|R|z|Z) ;;
-			*) warninvalid ; continue ;;
-		esac
-
-		# fall back on defaults when parameters are passed as '-'
-		if [ "$mode" = '-' -o "$mode" = '' ]; then
-			case "$cmd" in
-				p|f|F) mode=0644 ;;
-				d|D|v) mode=0755 ;;
-				C|z|Z|x|r|R|L) ;;
-			esac
-		fi
-
-		[ "$uid" = '-' -o "$uid" = '' ] && uid=0
-		[ "$gid" = '-' -o "$gid" = '' ] && gid=0
-		[ "$age" = '-' -o "$age" = '' ] && age=0
-		[ "$arg" = '-' -o "$arg" = '' ] && arg=''
-		set -- "$path" "$mode" "$uid" "$gid" "$age" "$arg"
-
-		[ -n "$EXCLUDE" ] && checkprefix $path $EXCLUDE && continue
-		[ -n "$PREFIX" ] && ! checkprefix $path $PREFIX && continue
-
-		if [ $FORCE -gt 0 ]; then
-			case $cmd in
-				p|L|c|b) [ -f "$path" ] && dryrun_or_real rm -f "$path"
-			esac
-		fi
-
-		[ "$VERBOSE" -eq "1" ] && echo _$cmd "$@"
-		_$cmd "$@"
-		rc=$?
-		if [ "${DRYRUN}" -eq "0" ]; then
-			[ $rc -ne 0 ] && error=$((error + 1))
-		fi
-	done <$FILE
-done
-
-exit $error
-
-# vim: set ts=2 sw=2 sts=2 noet ft=sh:

src/libeinfo/einfo.h

@@ -71,6 +71,7 @@ void elog(int, const char * EINFO_RESTRICT, ...) EINFO_PRINTF(2, 3);
  *
  * The n suffix denotes that no new line should be printed.
  * The v suffix means only print if EINFO_VERBOSE is yes.
+ * The x suffix means function will exit() returning failure.
  */
 /*@{*/
 int einfon(const char * __EINFO_RESTRICT, ...) EINFO_PRINTF(1, 2);

src/librc/librc-misc.c

@@ -19,6 +19,7 @@
 
 #include "queue.h"
 #include "librc.h"
+#include "helpers.h"
 
 bool
 rc_yesno(const char *value)
@@ -118,7 +119,7 @@ rc_getline(char **line, size_t *len, FILE *fp)
 librc_hidden_def(rc_getline)
 
 char *
-rc_proc_getent(const char *ent)
+rc_proc_getent(const char *ent _unused)
 {
 #ifdef __linux__
 	FILE *fp;
@@ -404,6 +405,12 @@ librc_hidden_def(rc_config_value)
  * each rc_conf_value call */
 static RC_STRINGLIST *rc_conf = NULL;
 
+static void
+_free_rc_conf(void)
+{
+	rc_stringlist_free(rc_conf);
+}
+
 char *
 rc_conf_value(const char *setting)
 {
@@ -413,17 +420,13 @@ rc_conf_value(const char *setting)
 
 	if (! rc_conf) {
 		rc_conf = rc_config_load(RC_CONF);
-#ifdef DEBUG_MEMORY
 		atexit(_free_rc_conf);
-#endif
 
 		/* Support old configs. */
 		if (exists(RC_CONF_OLD)) {
 			old = rc_config_load(RC_CONF_OLD);
 			TAILQ_CONCAT(rc_conf, old, entries);
-#ifdef DEBUG_MEMORY
 			free(old);
-#endif
 		}
 
 		rc_conf = rc_config_directory(rc_conf);
@@ -443,11 +446,3 @@ rc_conf_value(const char *setting)
 	return rc_config_value(rc_conf, setting);
 }
 librc_hidden_def(rc_conf_value)
-
-#ifdef DEBUG_MEMORY
-static void
-_free_rc_conf(void)
-{
-	rc_stringlist_free(rc_conf);
-}
-#endif

src/librc/librc.c

@@ -19,6 +19,7 @@ const char librc_copyright[] = "Copyright (c) 2007-2008 Roy Marples";
 
 #include "queue.h"
 #include "librc.h"
+#include <helpers.h>
 #ifdef __FreeBSD__
 #  include <sys/sysctl.h>
 #endif
@@ -232,7 +233,7 @@ detect_prefix(const char *systype)
 }
 
 static const char *
-detect_container(const char *systype)
+detect_container(const char *systype _unused)
 {
 #ifdef __FreeBSD__
 	if (systype) {
@@ -285,6 +286,9 @@ detect_container(const char *systype)
 		return RC_SYS_RKT;
 	else if (file_regex("/proc/1/environ", "container=systemd-nspawn"))
 		return RC_SYS_SYSTEMD_NSPAWN;
+	else if (exists("/.dockerenv"))
+		return RC_SYS_DOCKER;
+	/* old test, I'm not sure when this was valid. */
 	else if (file_regex("/proc/1/environ", "container=docker"))
 		return RC_SYS_DOCKER;
 #endif
@@ -293,7 +297,7 @@ detect_container(const char *systype)
 }
 
 static const char *
-detect_vm(const char *systype)
+detect_vm(const char *systype _unused)
 {
 #ifdef __NetBSD__
 	if (systype) {
@@ -364,11 +368,12 @@ rc_parse_service_state(RC_SERVICE state)
  * specified runlevel in dependency order, including the
  * specified runlevel. */
 static void
-get_runlevel_chain(const char *runlevel, RC_STRINGLIST *level_list)
+get_runlevel_chain(const char *runlevel, RC_STRINGLIST *level_list, RC_STRINGLIST *ancestor_list)
 {
 	char path[PATH_MAX];
 	RC_STRINGLIST *dirs;
-	RC_STRING *d, *dn;
+	RC_STRING *d, *parent;
+	const char *nextlevel;
 
 	/*
 	 * If we haven't been passed a runlevel or a level list, or
@@ -392,8 +397,27 @@ get_runlevel_chain(const char *runlevel, RC_STRINGLIST *level_list)
 	 */
 	snprintf(path, sizeof(path), "%s/%s", RC_RUNLEVELDIR, runlevel);
 	dirs = ls_dir(path, LS_DIR);
-	TAILQ_FOREACH_SAFE(d, dirs, entries, dn)
-		get_runlevel_chain(d->value, level_list);
+	TAILQ_FOREACH(d, dirs, entries) {
+		nextlevel = d->value;
+
+		/* Check for loop */
+		if (rc_stringlist_find(ancestor_list, nextlevel)) {
+			fprintf(stderr, "Loop detected in stacked runlevels attempting to enter runlevel %s!\n",
+			    nextlevel);
+			fprintf(stderr, "Ancestors:\n");
+			TAILQ_FOREACH(parent, ancestor_list, entries)
+				fprintf(stderr, "\t%s\n", parent->value);
+			exit(1);
+		}
+
+		/* Add new ancestor */
+		rc_stringlist_add(ancestor_list, nextlevel);
+
+		get_runlevel_chain(nextlevel, level_list, ancestor_list);
+
+		rc_stringlist_delete(ancestor_list, nextlevel);
+	}
+	rc_stringlist_free(dirs);
 }
 
 bool
@@ -497,9 +521,12 @@ librc_hidden_def(rc_runlevel_unstack)
 RC_STRINGLIST *
 rc_runlevel_stacks(const char *runlevel)
 {
-	RC_STRINGLIST *stack;
+	RC_STRINGLIST *stack, *ancestor_list;
 	stack = rc_stringlist_new();
-	get_runlevel_chain(runlevel, stack);
+	ancestor_list = rc_stringlist_new();
+	rc_stringlist_add(ancestor_list, runlevel);
+	get_runlevel_chain(runlevel, stack, ancestor_list);
+	rc_stringlist_free(ancestor_list);
 	return stack;
 }
 librc_hidden_def(rc_runlevel_stacks)

src/rc/do_service.c

@@ -36,7 +36,7 @@ int main(int argc, char **argv)
 	bool ok = false;
 	char *service;
 	char *exec;
-	int idx;
+	int idx = 0;
 	RC_SERVICE state, bit;
 
 	applet = basename_c(argv[0]);

src/rc/fstabinfo.c

@@ -178,6 +178,9 @@ int main(int argc, char **argv)
 	FILE *fp;
 #endif
 
+	/* fail if there is no /etc/fstab */
+	if (!exists("/etc/fstab"))
+		eerrorx("/etc/fstab does not exist");
 	/* Ensure that we are only quiet when explicitly told to be */
 	unsetenv("EINFO_QUIET");
 

src/rc/mountinfo.c

@@ -46,6 +46,7 @@
 #include "_usage.h"
 
 const char *applet = NULL;
+const char *procmounts = "/proc/mounts";
 const char *extraopts = "[mount1] [mount2] ...";
 const char *getoptstring = "f:F:n:N:o:O:p:P:iste:E:" getoptstring_COMMON;
 const struct option longopts[] = {
@@ -297,6 +298,9 @@ getmntfile(const char *file)
 	struct mntent *ent = NULL;
 	FILE *fp;
 
+	if (!exists("/etc/fstab"))
+		return NULL;
+
 	fp = setmntent("/etc/fstab", "r");
 	while ((ent = getmntent(fp)))
 		if (strcmp(file, ent->mnt_dir) == 0)
@@ -320,7 +324,7 @@ find_mounts(struct args *args)
 	int netdev;
 	RC_STRINGLIST *list;
 
-	if ((fp = fopen("/proc/self/mounts", "r")) == NULL)
+	if ((fp = fopen(procmounts, "r")) == NULL)
 		eerrorx("getmntinfo: %s", strerror(errno));
 
 	list = rc_stringlist_new();