Update ChangeLog

This fixes #231.

BUSYBOX.md

@@ -1,4 +1,5 @@
-# Using Busybox as your Default Shell with OpenRC
+Using Busybox as your Default Shell with OpenRC
+===============================================
 
 If you have/bin/sh linked to busybox, you need to be aware of several
 incompatibilities between busybox's applets and the standalone
@@ -22,9 +23,6 @@ or recognize the nofail option in fstab.
 
 CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
 
-CONFIG_IP -- The ip applet  doesn't support the "scope" modifier for
-"ip route add" and "ip address add".
-
 CONFIG_BB_SYSCTL -- The sysctl applet does not support the --system command
 line switch.
 

FEATURE-REMOVAL-SCHEDULE.md

@@ -1,11 +1,12 @@
-# Features Scheduled for Removal
+Features Scheduled for Removal
+==============================
 
 The following is a list of files and features that are going to be removed in
 the source tree.  Every entry should contain what exactly is going away, why it
 is happening, and who is going to be doing the work.  When the feature is
 removed, it should also be removed from this file.
 
-## Service pause action
+# Service pause action
 
 When: 1.0
 
@@ -13,7 +14,7 @@ Why: The same affect can be obtained with the --nodeps option to stop.
 
 Who:
 
-## start-stop-daemon options --startas, --chuid , --oknodo
+# start-stop-daemon options --startas, --chuid , --oknodo
 
 When: 1.0
 
@@ -25,7 +26,7 @@ Why: Obsolete or replaced by other options.
 
 Who:
 
-## runscript and rc symbolic links
+# runscript and rc symbolic links
 
 When: 1.0
 
@@ -34,7 +35,7 @@ Why: Deprecated in favor of openrc-run and openrc due to naming
 
 Who:
 
-## support for the opts variable in service scripts
+# support for the opts variable in service scripts
 
 When: 1.0
 
@@ -43,7 +44,7 @@ Why: Deprecated in favor of extra_commands, extra_started_commands
 
 Who:
 
-## support for local_start and local_stop
+# support for local_start and local_stop
 
 When: 1.0
 
@@ -51,7 +52,7 @@ Why: Deprecated in favor of executable scripts in @SYSCONFDIR@/local.d
 
 Who:
 
-## the mtab service script
+# the mtab service script
 
 When: force /etc/mtab to link to /proc/self/mounts in 1.0, remove
 	  service in 2.0
@@ -61,13 +62,13 @@ Why: /etc/mtab should be a symbolic link to /proc/self/mounts on modern
 
 Who:
 
-## C API Functions in rc.h
+# C API Functions in rc.h
 
 If you have a c program that links to librc and uses functions from
 there, this section will list API functions which are deprecated and
 will be removed along with the reason they are being removed.
 
-### rc_getline()
+## rc_getline()
 
 When: 1.0
 

HISTORY.md

@@ -1,4 +1,5 @@
-# OpenRC History
+OpenRC History
+==============
 
 This history of OpenRC was written by Daniel Robbins, Roy Marples, William
 Hubbs and others.

Makefile

@@ -13,7 +13,13 @@ MK=			${TOP}/mk
 
 include ${TOP}/Makefile.inc
 
-SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
+SUBDIR=		conf.d etc init.d local.d man scripts sh src support sysctl.d
+
+# Build bash completion or not
+MKBASHCOMP?=	no
+ifeq (${MKBASHCOMP},yes)
+SUBDIR+=	bash-completion
+endif
 
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes
@@ -21,6 +27,12 @@ ifeq (${MKPKGCONFIG},yes)
 SUBDIR+=	pkgconfig
 endif
 
+# Build zsh completion or not
+MKZSHCOMP?=	no
+ifeq (${MKZSHCOMP},yes)
+SUBDIR+=	zsh-completion
+endif
+
 # We need to ensure that runlevels is done last
 SUBDIR+=	runlevels
 

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.22
+VERSION=	0.38.1
 PKG=		${NAME}-${VERSION}

NEWS.md

@@ -1,8 +1,130 @@
-# OpenRC NEWS
+OpenRC NEWS
+===========
 
 This file will contain a list of notable changes for each release. Note
 the information in this file is in reverse order.
 
+## OpenRC 0.37
+
+start-stop-daemon now supports logging stdout and stderr of daemons to
+processes instead of files. These processes are defined by the
+output_logger and error_logger variables in standard service scripts, or
+by the  -3/--output-logger or -4/--error-logger switches if you use
+start-stop-daemon directly. For more information on this, see the
+start-stop-daemon man page.
+
+## OpenRC 0.36
+
+In this release, the modules-load service has been combined into the
+modules service since there is no reason I know of to keep them
+separate. However, modules also provides modules-load in case you were
+using modules-load in  your dependencies.
+
+The consolefont, keymaps, numlock and procfs service scripts no longer
+have a dependency on localmount.
+If you are a linux user and are still separaating / from /usr,
+you will need to add the following line to the appropriate conf.d files:
+
+rc_need="localmount"
+
+## OpenRC 0.35
+
+In this version, the cgroups mounting logic has been moved from the
+sysfs service to the cgroups service. This was done so cgroups can be
+mounted inside an lxc/lxd container without using the other parts of the
+sysfs service.
+
+?As a result of this change, if you are upgrading, you need to add
+cgroups to your sysinit runlevel by running the following command as
+root:
+
+```
+# rc-update add cgroups sysinit
+```
+
+For more information, see the following issue:
+
+https://github.com/openrc/openrc/issues/187
+
+Consider this your second notification with regard to /etc/mtab being a
+file instead of a symbolic link.
+
+In this version, the mtab service will complain loudly if you have
+mtab_is_file set to yes and recommend that you change this to no and
+restart the mtab service to migrate /etc/mtab to a symbolic link.
+
+If there is a valid technical reason to keep /etc/mtab as a flat file
+instead of a symbolic link to /proc/self/mounts, we are interested and
+we will keep the support in that case. Please open an issue and let us
+know however. Otherwise, consider this your final notice that the mtab
+service will be removed in the future.
+
+## OpenRC 0.33
+
+This version removes the "service" binary which was just a copy of
+"rc-service" provided for compatibility.
+
+If you still need the "service" binary, as opposed to "rc-service", it is
+recommended that you use something like Debian's init-system-helpers.
+Otherwise, just use "rc-service" in place of "service".
+
+## OpenRC 0.31
+
+This version adds support for Control Groups version 2, which is
+considered stable as of Linux-4.13. Please see /etc/rc.conf for
+documentation on how to configure control groups.
+
+## OpenRC-0.28
+
+This version mounts efivars read only due to concerns about changes in
+this file system making systems unbootable.  If you need to change something
+in this path, you will need to re-mount it read-write, make the change
+and re-mount it read-only.
+
+Also, you can override this behavior by adding a line for efivars to
+fstab if you want efivars mounted read-write.
+
+For more information on this issue, see the following url:
+
+https://github.com/openrc/openrc/issues/134
+
+## OpenRC-0.25
+
+This version contains an OpenRC-specific implementation of init for
+Linux which can be used in place of sysvinit or any other init process.
+For information on its usage, see the man pages for openrc-init (8) and
+openrc-shutdown (8).
+
+## OpenRC-0.24.1
+
+This version starts cleaning up the dependencies so that rc_parallel
+will work correctly.
+
+The first step in this process is to remove the 'before *' from the
+depend functions in the clock services. This means some  services not
+controlled by OpenRC may now start before instead of after the clock
+service. If it is important for these services to start after the clock
+service, they need to have 'after clock' added to their depend
+functions.
+
+## OpenRC-0.24
+
+Since the deptree2dot tool and the perl requirement are completely
+optional, the deptree2dot tool has been moved to the support directory.
+As a result, the MKTOOLS=yes/no switch has been removed from the makefiles.
+
+This version adds the agetty service which can be used to spawn
+agetty on a specific terminal. This is currently documented in the
+agetty-guide.md file at the top level of this distribution.
+
+## OpenRC-0.23
+
+The tmpfiles.d processing code, which was part of previous versions of
+OpenRC, has been separated into its own package [1]. If you need to
+process systemd style tmpfiles.d files, please install this package.
+
+[1] https://github.com/openrc/opentmpfiles
+
 ## OpenRC-0.22
 
 In previous versions of OpenRC, configuration information was processed

README.md

@@ -1,4 +1,5 @@
-# OpenRC README
+OpenRC README
+=============
 
 OpenRC is a dependency-based init system that works with the
 system-provided init program, normally `/sbin/init`. Currently, it does
@@ -22,15 +23,17 @@ below arguments to the make command
 PROGLDFLAGS=-static
 LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
+MKBASHCOMP=no
 MKNET=no
 MKPAM=pam
 MKPREFIX=yes
 MKPKGCONFIG=no
 MKSELINUX=yes
 MKSTATICLIBS=no
+MKSYSVINIT=yes
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
-MKTOOLS=yes
+MKZSHCOMP=no
 PKG_PREFIX=/usr/pkg
 LOCAL_PREFIX=/usr/local
 PREFIX=/usr/local
@@ -73,10 +76,6 @@ Obviously, if you're installing this onto a system that does not use
 OpenRC by default then you may wish to backup the above listed files,
 remove them and then install so that the OS hooks into OpenRC.
 
-`init.d.misc` is not installed by default as the scripts will need
-tweaking on a per distro basis. They are also non essential to the
-operation of the system.
-
 ## Reporting Bugs
 
 If you are using Gentoo Linux, bugs can be filed on their bugzilla under

STYLE-GUIDE.md

@@ -1,4 +1,5 @@
-# OpenRC Style Guide
+OpenRC Coding Style Guide
+=========================
 
 This is the openrc style manual.  It governs the coding style of all code
 in this repository.  Follow it.  Contact openrc@gentoo.org for any questions

agetty-guide.md

@@ -0,0 +1,19 @@
+Setting up the agetty service in OpenRC
+=================================xxxxxx
+
+The agetty service is an OpenRC specific way to monitor and respawn a
+getty, using agetty, on Linux. To use this method, make sure you aren't
+spawning a getty manager for this port some other way (such as through
+sysvinit/inittab), then run the following commands as root.
+
+Note that [port] refers to the port you are spawning the getty on, for
+example, tty1 or ttyS0. The full path to it, for example, /dev/tty1
+should not be used.
+
+```
+# cd /etc/init.d
+# ln -s agetty agetty.[port]
+# cd /etc/conf.d
+# cp agetty agetty.[port]
+#rc-update add agetty.[port] [runlevel]
+```

bash-completion/Makefile

@@ -0,0 +1,11 @@
+DIR=	${BASHCOMPDIR}
+CONF=	openrc \
+		openrc-service-script \
+		rc-service \
+		rc-status \
+		rc-update \
+
+MK=	../mk
+include ${MK}/os.mk
+
+include ${MK}/scripts.mk

bash-completion/openrc

@@ -0,0 +1,24 @@
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+#
+# openrc completion command
+#
+_openrc()
+{
+	local cur
+	COMPREPLY=()
+	cur="${COMP_WORDS[COMP_CWORD]}"
+	if [[ ${#COMP_WORDS[*]} -le 2 ]]; then
+		COMPREPLY=($(compgen -W "$(rc-status --list)" -- $cur))
+	fi
+	return 0
+} &&
+complete -F _openrc openrc

bash-completion/openrc-service-script

@@ -0,0 +1,29 @@
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+_openrc_service_script()
+{
+	local script="${COMP_WORDS[0]}"
+	local cur="${COMP_WORDS[$COMP_CWORD]}"
+
+	if [[ ( -f "${script}" || -h "${script}" ) && -r "${script}" ]] \
+	&& [[ "$(head -n 1 "${script}")" =~ \#\!.*/openrc-run ]]
+	then
+		[[ $COMP_CWORD -gt 1 ]] && return 1
+		COMPREPLY=($(opts="start stop status restart pause zap ineed needsme iuse usesme broken"; \
+			eval "$(grep '^opts=' "${script}")"; echo "${opts}"))
+		[[ -n "$COMPREPLY" ]] || COMPREPLY=(start stop restart zap)
+		COMPREPLY=($(compgen -W "${COMPREPLY[*]}" -- "${cur}"))
+	else
+		COMPREPLY=($(compgen -o default -- "${cur}"))
+	fi
+	return 0
+}
+complete -F _openrc_service_script */etc/init.d/*

bash-completion/rc-service

@@ -0,0 +1,113 @@
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+#
+# rc-service completion command
+#
+_rc_service()
+{
+	local cur prev numwords opts
+	local words i x filename
+	local action actionpos
+	COMPREPLY=()
+	cur="${COMP_WORDS[COMP_CWORD]}"
+	prev="${COMP_WORDS[COMP_CWORD-1]}"
+	numwords=${#COMP_WORDS[*]}
+
+	if [[ ${prev} == '>' || ${prev} == '<' ]] ; then
+		COMPREPLY=($(compgen -f -- ${cur}))
+		return 0
+	fi
+
+	# find action
+	for x in ${COMP_LINE} ; do
+		if [[ ${x} =~ --(list|exists|resolve) ]] || [[ ${x} =~ -(l|e|r) ]]
+		then
+			action=${x}
+			break
+		fi
+	done
+	if [[ -n ${action} ]]; then
+		for ((i = 0; i < ${numwords}; i++ )); do
+			if [[ ${COMP_WORDS[${i}]} == "${action}" ]]; then
+				actionpos=${i}
+				break
+			fi
+		done
+
+		for ((i = 1; i < ${numwords}; i++ )); do
+			if [[ ! ${COMP_WORDS[$i]} == -* ]]; then
+				break
+			fi
+		done
+	fi
+
+	if [[ ${COMP_CWORD} -eq 3 ]]; then
+		return 1
+	fi
+
+	# check if an option was typed
+	if [[ ${cur} == -* ]]; then
+		if [[ ${cur} == --* ]]; then
+			opts="--list --exists --resolve"
+			COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+			return 0
+		elif [[ ${cur} == -* ]]; then
+			opts="-l -e -r"
+			COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+			return 0
+		fi
+
+		# NOTE: This slows things down!
+		# (Adapted from bash_completion by Ian Macdonald <ian@caliban.org>)
+		# This removes any options from the list of completions that have
+		# already been specified on the command line.
+		COMPREPLY=($(echo "${COMP_WORDS[@]}" | \
+		(while read -d ' ' i; do
+			[[ -z ${i} ]] && continue
+			# flatten array with spaces on either side,
+			# otherwise we cannot grep on word boundaries of
+			# first and last word
+			COMPREPLY=" ${COMPREPLY[@]} "
+			# remove word from list of completions
+			COMPREPLY=(${COMPREPLY/ ${i%% *} / })
+		done
+		echo ${COMPREPLY[@]})))
+
+		return 0
+	else
+		# no option was typed
+		if [[ ${COMP_CWORD} -eq 1 ]]; then			  # if first word typed
+			words="$(rc-service --list | grep ^${cur})"		  # complete for init scripts
+			COMPREPLY=($(for i in ${words} ; do \
+			[[ ${i} == ${cur}* ]] && echo ${i} ; \
+			done))
+			return 0
+		elif [[ ${COMP_CWORD} -eq 2 ]] && [[ ${prev} != -* ]]; then # if second word typed and we didn't type in a function
+			filename=$(rc-service --resolve ${prev})
+			opts=$(cat ${filename} | grep "^\w*()" | sed "s/().*$//")	# Greps the functions included in the init script
+			if [[ "x${opts}" == "x" ]] ; then			   # if no options found loosen the grep algorhythm
+				opts=$(cat ${filename} | grep "\w*()" | sed "s/().*$//")
+			fi
+			COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+			return 0
+		fi
+	fi
+	if [[ ${action} == '--exists' ]] || [[ ${action} == '-e' ]] || \
+		[[ ${action} == '--resolve' ]]  || [[ ${action} == '-r' ]]; then
+		words="$(rc-service --list | grep ^${cur})"
+		COMPREPLY=($(for i in ${words} ; do \
+			[[ ${i} == ${cur}* ]] && echo ${i} ; \
+		done))
+		return 0
+	fi
+	return 0
+} &&
+complete -F _rc_service rc-service

bash-completion/rc-status

@@ -0,0 +1,31 @@
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+#
+# rc-status completion command
+#
+_rcstatus()
+{
+	local cur
+	cur="${COMP_WORDS[COMP_CWORD]}"
+	if [[ $COMP_CWORD -eq 1 ]]; then
+		if [[ "${cur}" == --* ]]; then
+			COMPREPLY=($(compgen -W '--all --list --unused' -- ${cur}))
+		elif [[ "${cur}" == -* ]]; then
+			COMPREPLY=($(compgen -W '-a -l -u' -- ${cur}))
+		else
+			COMPREPLY=($(compgen -W "$(rc-status --list)" -- ${cur}))
+		fi
+	else
+		unset COMPREPLY
+	fi
+	return 0
+} &&
+complete -F _rcstatus rc-status

bash-completion/rc-update

@@ -0,0 +1,42 @@
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+#
+# rc-update completion command
+#
+_rc_update()
+{
+	local cur show
+	COMPREPLY=()
+	cur="${COMP_WORDS[COMP_CWORD]}"
+	if [[ $COMP_CWORD -eq 1 ]]; then
+		if [[ "${cur}" == -* ]]; then
+			COMPREPLY=($(compgen -W '-a -d -s' -- ${cur}))
+		else
+			COMPREPLY=($(compgen -W 'add del show' ${cur}))
+		fi
+	else
+		if [[ "${COMP_WORDS[1]}" == "show" ]] || [[ "${COMP_WORDS[1]}" == "-s" ]]; then
+			show="TRUE"
+		fi
+		if ([[ $COMP_CWORD -eq 3 ]] && [[ -z "$show" ]]) || \
+			([[ $COMP_CWORD -eq 2 ]] && [[ -n "$show" ]]); then
+		COMPREPLY=($(compgen -W "$(rc-status --list)" -- $cur))
+		elif [[ $COMP_CWORD -eq 2 ]]; then
+			COMPREPLY=($(compgen -W "$(rc-service --list)" $cur))
+		elif [[ ${#COMP_WORDS[*]} -gt 2 ]] ; then
+			COMPREPLY=($(compgen -W "$(rc-status --list)" -- $cur))
+		else
+			unset COMPREPLY
+		fi
+	fi
+	return 0
+} &&
+complete -F _rc_update rc-update

conf.d/Makefile

@@ -1,8 +1,7 @@
 include ../mk/net.mk
 
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount netmount swap urandom tmpfiles \
-		${CONF-${OS}}
+CONF=	bootmisc fsck hostname localmount netmount swap urandom ${CONF-${OS}}
 
 ifeq (${MKNET},yes)
 CONF+= network staticroute
@@ -13,8 +12,8 @@ include ${MK}/os.mk
 
 CONF-FreeBSD=	ipfw modules moused powerd rarpd savecore syscons
 
-CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules mtab \
-	net-online
+CONF-Linux=	agetty consolefont devfs dmesg hwclock keymaps killprocs modules \
+	mtab net-online
 
 CONF-NetBSD=	moused rarpd savecore
 

conf.d/agetty

@@ -0,0 +1,11 @@
+# make agetty quiet
+#quiet="yes"
+
+# Set the baud rate of the terminal line
+#baud=""
+
+# set the terminal type
+#term_type="linux"
+
+# extra options to pass to agetty for this port
+#agetty_options=""

conf.d/killprocs

@@ -1,3 +1,6 @@
-# If you wish to pass any options to killall5 during shutdown,
+# If you wish to pass any options to kill_all during shutdown,
 # you should do so here.
+#
+# The setting is called killall5_opts because the options here are meant
+# to be identical to those you could pass to killall5.
 killall5_opts=""

conf.d/localmount

@@ -3,7 +3,7 @@
 #no_umounts="/dir1:/var/dir2"
 #
 # Mark certain mount points as critical.
-# This contains aspace separated list of mount points which should be
+# This contains a space separated list of mount points which should be
 # considered critical. If one of these mount points cannot be mounted,
 # localmount will fail.
 # By default, this is empty.

conf.d/mtab

@@ -1,5 +1,13 @@
+# As far as we are aware, there are no modern linux tools or use cases
+# which require /etc/mtab to be a separate file from /proc/self/mounts,
+# so this setting should be commented out.
+# If it is set to yes, please comment it out and run this command:
+# # rc-service mtab restart
+# In the future, the mtab service will be removed since we are not aware
+# of any need to manipulate /etc/mtab as a separate file from
+# /proc/self/mounts.
+# If you have a technical reason we should keep this support, please
+# open an issue at https://github.com/openrc/openrc/issues and let us
+# know about your situation.
 # This setting controls whether /etc/mtab is a file or symbolic link.
-# Most of the time, you shouldn't touch this. However, if the default
-# breaks your system in some way, please see the NEWS.md file that comes
-# with OpenRC for the actions to take.
 # mtab_is_file=no

conf.d/net-online

@@ -1,12 +1,15 @@
 # The interfaces setting controls which interfaces the net-online
-# service considers in deciding whether the network is active. By
-# default, it is all ethernet or wireless LAN interfaces.
+# service considers in deciding whether the network is active. The
+# default is all interfaces that support ethernet.
 #interfaces=""
 
-# This setting controls whether a ping to the default gateway is
-# included in the test for network connectivity after all interfaces
-# are active.
-#ping_default_gateway=no
+# This setting controls whether a ping test is included in the test for
+# network connectivity after all interfaces are active.
+#include_ping_test=no
+
+# This setting is the host to attempt to ping if the above is yes.
+# The default is google.com.
+#ping_test_host=some.host.name
 
 # The timeout setting controls how long the net-online service waits
 # for the network to be configured.

conf.d/tmpfiles

@@ -1,3 +0,0 @@
-# Extra options for tmpfiles.sh
-#tmpfiles_opts="--verbose"
-tmpfiles_opts=""

etc/rc.conf

@@ -48,7 +48,7 @@
 # /var/log/rc.log
 # NOTE: Linux systems require the devfs service to be started before
 # logging can take place and as such cannot log the sysinit runlevel.
-#rc_logger="YES"
+#rc_logger="NO"
 
 # Through rc_log_path you can specify a custom log file.
 # The default value is: /var/log/rc.log
@@ -178,6 +178,11 @@
 # "xenU"           - XenU Domain (Linux and NetBSD)
 #rc_sys=""
 
+# if  you use openrc-init, which is currently only available on Linux,
+# this is the default runlevel to activate after "sysinit" and "boot"
+# when booting.
+#rc_default_runlevel="default"
+
 # on Linux and Hurd, this is the number of ttys allocated for logins
 # It is used in the consolefont, keymaps, numlock and termencoding
 # service scripts.
@@ -186,13 +191,48 @@ rc_tty_number=12
 ##############################################################################
 # LINUX CGROUPS RESOURCE MANAGEMENT
 
-# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controller is mounted under
-# /sys/fs/cgroup.
-# None of the other options in this section work if this is set to "NO".
+# This sets the mode used to mount cgroups.
+# "hybrid" mounts cgroups version 2 on /sys/fs/cgroup/unified and
+# cgroups version 1 on /sys/fs/cgroup.
+# "legacy" mounts cgroups version 1 on /sys/fs/cgroup
+# "unified" mounts cgroups version 2 on /sys/fs/cgroup
+#rc_cgroup_mode="hybrid"
+
+# This is a list of controllers which should be enabled for cgroups version 2.
+# If hybrid mode is being used, controllers listed here will not be
+# available for cgroups version 1.
+# This is a global setting.
+#rc_cgroup_controllers=""
+
+# This variable contains the cgroups version 2 settings for your services.
+# If this is set in this file, the settings will apply to all services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the setting and value followed by a newline.
+# Multiple settings and values can be specified.
+# For example, you would use this to set the maximum memory and maximum
+# number of pids for a service.
+#rc_cgroup_settings="
+#memory.max 10485760
+#pids.max max
+#"
+#
+# For more information about the adjustments that can be made with
+# cgroups version 2, see Documentation/cgroups-v2.txt in the linux kernel
+# source tree.
+#rc_cgroup_settings=""
+
+# This switch controls whether or not cgroups version 1 controllers are
+# individually mounted under
+# /sys/fs/cgroup in hybrid or legacy mode.
 #rc_controller_cgroups="YES"
 
-# The following settings allow you to set up values for the cgroup
+# The following setting turns on the memory.use_hierarchy setting in the
+# root memory cgroup for cgroups v1.
+# It must be set to yes in this file if you want this functionality.
+#rc_cggroup_memory_use_hierarchy="NO"
+
+# The following settings allow you to set up values for the cgroups version 1
 # controllers for your services.
 # They can be set in this file;, however, if you do this, the settings
 # will apply to all of your services.
@@ -206,8 +246,9 @@ rc_tty_number=12
 # cpu.shares 512
 # "
 #
-#For more information about the adjustments that can be made with
-#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+# For more information about the adjustments that can be made with
+# cgroups version 1, see Documentation/cgroups-v1/* in the linux kernel
+# source tree.
 
 # Set the blkio controller settings for this service.
 #rc_cgroup_blkio=""
@@ -239,12 +280,35 @@ rc_tty_number=12
 # Set the pids controller settings for this service.
 #rc_cgroup_pids=""
 
-# Set this to YES if yu want all of the processes in a service's cgroup
+# Set this to YES if you want all of the processes in a service's cgroup
 # killed when the service is stopped or restarted.
-# This should not be set globally because it kills all of the service's
-# child processes, and most of the time this is undesirable. Please set
-# it in /etc/conf.d/<service>.
+# Be aware that setting this to yes means all of a service's
+# child processes will be killed. Keep this in mind if you set this to
+# yes here instead of for the individual services in
+# /etc/conf.d/<service>.
 # To perform this cleanup manually for a stopped service, you can
 # execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
 # rc-service <service> cgroup_cleanup.
+# The process followed in this cleanup is the following:
+# 1. send stopsig (sigterm if it isn't set) to all processes left in the
+# cgroup immediately followed by sigcont.
+# 2. Send sighup to all processes in the cgroup if rc_send_sighup is
+# yes.
+# 3. delay for rc_timeout_stopsec seconds.
+# 4. send sigkill to all processes in the cgroup unless disabled by
+# setting rc_send_sigkill to no.
 # rc_cgroup_cleanup="NO"
+
+# If this is yes, we will send sighup to the processes in the cgroup
+# immediately after stopsig and sigcont.
+#rc_send_sighup="NO"
+
+# This is the amount of time in seconds that we delay after sending sigcont
+# and optionally sighup, before we optionally send sigkill to all
+# processes in the # cgroup.
+# The default is 90 seconds.
+#rc_timeout_stopsec="90"
+
+# If this is set to no, we do not send sigkill to all processes in the
+# cgroup.
+#rc_send_sigkill="YES"

etc/rc.shutdown.in

@@ -14,7 +14,7 @@ trap : SIGINT SIGQUIT
 
 # Try and use stuff in /lib over anywhere else so we can shutdown
 # local mounts correctly.
-LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}" ; export LD_LIBRARY_PATH
+LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LD_LIBRARY_PATH}" ; export LD_LIBRARY_PATH
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)

init.d/.gitignore

@@ -1,4 +1,6 @@
+agetty
 binfmt
+cgroups
 modules-load
 bootmisc
 fsck
@@ -45,5 +47,3 @@ syslogd
 termencoding
 ttys
 wscons
-tmpfiles.dev
-tmpfiles.setup

init.d/Makefile

@@ -2,8 +2,8 @@ include ../mk/net.mk
 
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
-	netmount.in osclock.in root.in savecache.in swap.in tmpfiles.setup.in  \
-	swclock.in sysctl.in runsvdir.in urandom.in s6-svscan.in ${SRCS-${OS}}
+	netmount.in osclock.in root.in savecache.in swap.in swclock.in \
+	sysctl.in runsvdir.in urandom.in s6-svscan.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
 # Are we installing our network scripts?
@@ -19,11 +19,12 @@ SRCS-FreeBSD=	hostid.in modules.in moused.in newsyslog.in pf.in rarpd.in \
 		rc-enabled.in rpcbind.in savecore.in syslogd.in
 # These are FreeBSD specific
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
-		modules.in modules-load.in mixer.in nscd.in powerd.in syscons.in
+		mixer.in nscd.in powerd.in syscons.in
 
-SRCS-Linux=	binfmt.in devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
-		killprocs.in modules.in modules-load.in mount-ro.in mtab.in numlock.in \
-		procfs.in net-online.in sysfs.in termencoding.in tmpfiles.dev.in
+SRCS-Linux=	agetty.in binfmt.in devfs.in cgroups.in dmesg.in hwclock.in \
+	consolefont.in keymaps.in killprocs.in modules.in \
+	mount-ro.in mtab.in numlock.in procfs.in net-online.in sysfs.in \
+termencoding.in
 
 # Generic BSD scripts
 SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \

init.d/adjkerntz.in

@@ -23,6 +23,7 @@ fi
 
 depend()
 {
+	after swclock
 	provide clock
 	# BSD adjkerntz needs to be able to write to /etc
 	if [ "$clock" = "UTC" -a -e /etc/wall_cmos_clock ] ||

init.d/agetty.in

@@ -0,0 +1,39 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+description="start agetty on a terminal line"
+supervisor=supervise-daemon
+port="${RC_SVCNAME#*.}"
+term_type="${term_type:-linux}"
+command=/sbin/agetty
+command_args_foreground="${agetty_options} ${port} ${baud} ${term_type}"
+pidfile="/run/${RC_SVCNAME}.pid"
+
+depend() {
+	after local
+	keyword -prefix
+}
+
+start_pre() {
+	if [ -z "$port" ]; then
+		eerror "${RC_SVCNAME} cannot be started directly. You must create"
+		eerror "symbolic links to it for the ports you want to start"
+		eerror "agetty on and add those to the appropriate runlevels."
+		return 1
+	else
+		export EINFO_QUIET="${quiet:-yes}"
+	fi
+}
+
+stop_pre()
+{
+	export EINFO_QUIET="${quiet:-yes}"
+}

init.d/binfmt.in

@@ -13,7 +13,7 @@ description="Register misc binary format handlers"
 
 depend()
 {
-	after procfs
+	after clock procfs
 	use modules devfs
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }

init.d/bootmisc.in

@@ -71,7 +71,8 @@ cleanup_var_run_dir()
 	ebegin "Cleaning /var/run"
 	for x in $(find /var/run ! -type d ! -name utmp \
 		! -name random-seed ! -name dev.db \
-		! -name ld-elf.so.hints ! -name ld.so.hints);
+		! -name ld-elf.so.hints ! -name ld-elf32.so.hints \
+		! -name ld.so.hints);
 	do
 		# Clean stale sockets
 		if [ -S "$x" ]; then
@@ -240,7 +241,7 @@ stop()
 {
 	# Write a halt record if we're shutting down
 	if [ "$RC_RUNLEVEL" = shutdown ]; then
-		[ "$RC_UNAME" = Linux ] && halt -w
+		[ "$RC_UNAME" = Linux ] && openrc-shutdown -w
 		if [ "$RC_SYS" = OPENVZ ]; then
 			yesno $RC_REBOOT && printf "" >/reboot
 		fi

init.d/cgroups.in

@@ -0,0 +1,149 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+description="Mount the control groups."
+
+cgroup_opts=nodev,noexec,nosuid
+
+depend()
+{
+	keyword -docker -prefix -systemd-nspawn -vserver
+	after sysfs
+}
+
+cgroup1_base()
+{
+	grep -qw cgroup /proc/filesystems || return 0
+	if ! mountinfo -q /sys/fs/cgroup; then
+		ebegin "Mounting cgroup filesystem"
+		local opts="${cgroup_opts},mode=755,size=${rc_cgroupsize:-10m}"
+		mount -n -t tmpfs -o "${opts}" cgroup_root /sys/fs/cgroup
+		eend $?
+	fi
+
+	if ! mountinfo -q /sys/fs/cgroup/openrc; then
+		local agent="${RC_LIBEXECDIR}/sh/cgroup-release-agent.sh"
+		mkdir /sys/fs/cgroup/openrc
+		mount -n -t cgroup \
+			-o none,${cgroup_opts},name=openrc,release_agent="$agent" \
+			openrc /sys/fs/cgroup/openrc
+		printf 1 > /sys/fs/cgroup/openrc/notify_on_release
+	fi
+	return 0
+}
+
+cgroup1_controllers()
+{
+	yesno "${rc_controller_cgroups:-YES}" && [ -e /proc/cgroups ]  &&
+	grep -qw cgroup /proc/filesystems || return 0
+	while read -r name _ _ enabled _; do
+		case "${enabled}" in
+			1)	mountinfo -q "/sys/fs/cgroup/${name}" && continue
+				local x
+				for x in $rc_cgroup_controllers; do
+				[ "${name}" = "blkio" ] && [ "${x}" = "io" ] &&
+					continue 2
+				[ "${name}" = "${x}" ] &&
+				continue 2
+				done
+				mkdir "/sys/fs/cgroup/${name}"
+				mount -n -t cgroup -o "${cgroup_opts},${name}" \
+					"${name}" "/sys/fs/cgroup/${name}"
+				yesno "${rc_cgroup_memory_use_hierarchy:-no}" &&
+					[ "${name}" = memory ] &&
+					echo 1 > /sys/fs/cgroup/memory/memory.use_hierarchy
+				;;
+		esac
+	done < /proc/cgroups
+	return 0
+}
+
+cgroup2_base()
+{
+	grep -qw cgroup2 /proc/filesystems || return 0
+	local base
+	base="$(cgroup2_find_path)"
+	mkdir -p "${base}"
+	mount -t cgroup2 none -o "${cgroup_opts},nsdelegate" "${base}" 2> /dev/null ||
+		mount -t cgroup2 none -o "${cgroup_opts}" "${base}"
+	return 0
+}
+
+cgroup2_controllers()
+{
+	grep -qw cgroup2 /proc/filesystems || return 0
+	local active cgroup_path x y
+	cgroup_path="$(cgroup2_find_path)"
+	[ -z "${cgroup_path}" ] && return 0
+	[ -e "${cgroup_path}/cgroup.controllers" ] &&
+	read -r active < "${cgroup_path}/cgroup.controllers"
+	for x in ${rc_cgroup_controllers}; do
+		for y in ${active}; do
+		[ "$x" = "$y" ] &&
+			[ -e "${cgroup_path}/cgroup.subtree_control" ]&&
+			echo "+${x}"  > "${cgroup_path}/cgroup.subtree_control"
+		done
+	done
+	return 0
+}
+
+cgroups_hybrid()
+{
+	cgroup1_base
+	cgroup2_base
+	cgroup2_controllers
+	cgroup1_controllers
+	return 0
+}
+
+cgroups_legacy()
+{
+	cgroup1_base
+	cgroup1_controllers
+	return 0
+}
+
+cgroups_unified()
+{
+	cgroup2_base
+	cgroup2_controllers
+	return 0
+}
+
+mount_cgroups()
+{
+	case "${rc_cgroup_mode:-hybrid}" in
+	hybrid) cgroups_hybrid ;;
+	legacy) cgroups_legacy ;;
+	unified) cgroups_unified ;;
+	esac
+	return 0
+}
+
+restorecon_cgroups()
+{
+	if [ -x /sbin/restorecon ]; then
+		ebegin "Restoring SELinux contexts in /sys/fs/cgroup"
+		restorecon -rF /sys/fs/cgroup >/dev/null 2>&1
+		eend $?
+	fi
+	return 0
+}
+
+start()
+{
+	# set up kernel support for cgroups
+	if [ -d /sys/fs/cgroup ]; then
+		mount_cgroups
+		restorecon_cgroups
+	fi
+	return 0
+}

init.d/consolefont.in

@@ -13,7 +13,7 @@ description="Sets a font for the consoles."
 
 depend()
 {
-	need localmount termencoding
+	need termencoding
 	after hotplug bootmisc modules
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }

init.d/devdb.in

@@ -13,6 +13,7 @@ description="Creates the dev database"
 
 depend()
 {
+	after clock
 	need localmount
 }
 

init.d/devfs.in

@@ -20,9 +20,12 @@ depend()
 
 mount_dev()
 {
-	local action=--mount devfstype msg=Mounting
+	local action conf_d_dir devfstype msg mountopts
+	action=--mount
+	conf_d_dir="${RC_SERVICE%/*/*}/conf.d"
+	msg=Mounting
 	# Some devices require exec, Bug #92921
-	local mountopts="exec,nosuid,mode=0755"
+	mountopts="exec,nosuid,mode=0755"
 	if yesno ${skip_mount_dev:-no} ; then
 		einfo "/dev will not be mounted due to user request"
 		return 0
@@ -33,7 +36,7 @@ mount_dev()
 		msg=Remounting
 	fi
 	if fstabinfo -q /dev; then
-		ebegin "$msg /dev according to @SYSCONFDIR@/fstab"
+		ebegin "$msg /dev according to fstab"
 		fstabinfo -q $action /dev
 		eend $?
 		return 0
@@ -54,7 +57,7 @@ mount_dev()
 		ewarn "is no entry for /dev in fstab."
 		ewarn "This means /dev will not be mounted."
 		ewarn "To avoid this message, set CONFIG_DEVTMPFS or CONFIG_TMPFS to y"
-		ewarn "in your kernel configuration or see @SYSCONFDIR@/conf.d/devfs"
+		ewarn "in your kernel configuration or see ${conf_d_dir}/${RC_SVCNAME}"
 	fi
 	return 0
 }

init.d/dumpon.in

@@ -12,6 +12,7 @@
 description="Configures a specific kernel dump device."
 
 depend() {
+	after clock
 	need swap
 	keyword -jail -prefix
 }

init.d/fsck.in

@@ -15,6 +15,7 @@ _IFS="
 
 depend()
 {
+	after clock
 	use dev clock modules
 	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -timeout -vserver -uml
 }

init.d/hostid.in

@@ -15,6 +15,7 @@ extra_commands="reset"
 depend()
 {
 	use root
+	after clock
 	before devd net
 	keyword -jail -prefix
 }

init.d/hostname.in

@@ -11,20 +11,22 @@
 
 description="Sets the hostname of the machine."
 
-depend() {
+depend()
+{
+	after clock
 	keyword -docker -lxc -prefix -systemd-nspawn
 }
 
 start()
 {
 	local h source x
-	if [ -s @SYSCONFDIR@/hostname ] && [ -r @SYSCONFDIR@/hostname ]; then
-	read h x <@SYSCONFDIR@/hostname
-	source=" from @SYSCONFDIR@/hostname"
+	if [ -s /etc/hostname ] && [ -r /etc/hostname ]; then
+		read h x </etc/hostname
+		source="from /etc/hostname"
 	else
 		# HOSTNAME variable used to be defined in caps in conf.d/hostname.
 		# It is also a magic variable in bash.
-		h=${hostname-${HOSTNAME}} # checkbashisms: false positive
+		h=${hostname:-${HOSTNAME}} # checkbashisms: false positive (HOSTNAME var)
 	fi
 	if [ -z "$h" ]; then
 		einfo "Using default system hostname"

init.d/hwclock.in

@@ -33,8 +33,6 @@ depend()
 	want modules
 	if yesno $clock_adjfile; then
 		use root
-	else
-		before *
 	fi
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
@@ -106,8 +104,8 @@ start()
 				modprobe -q $x && rtc_exists && modname="$x" && break
 			done
 			[ -n "$modname" ] &&
-				ewarn "The $modname module needs to be configured in \
-					@SYSCONFDIR@/conf.d/modules or built in."
+				ewarn "The $modname module needs to be configured in" \
+					"${RC_SERVICE%/*/*}/conf.d/modules or built in."
 		fi
 	fi
 

init.d/keymaps.in

@@ -13,8 +13,8 @@ description="Applies a keymap for the consoles."
 
 depend()
 {
-	need localmount termencoding
-	after bootmisc
+	need termencoding
+	after bootmisc clock
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 

init.d/killprocs.in

@@ -19,9 +19,9 @@ depend()
 start()
 {
 	ebegin "Terminating remaining processes"
-	killall5 -15 ${killall5_opts}
+	kill_all 15 ${killall5_opts}
 	eend 0
 	ebegin "Killing remaining processes"
-	killall5 -9 ${killall5_opts}
+	kill_all 9 ${killall5_opts}
 	eend 0
 }

init.d/local.in

@@ -9,7 +9,10 @@
 # This file may not be copied, modified, propagated, or distributed
 # except according to the terms contained in the LICENSE file.
 
-description="Executes user programs in @SYSCONFDIR@/local.d"
+conf_d_dir="${RC_SERVICE%/*/*}/conf.d"
+local_d_dir="${RC_SERVICE%/*/*}/local.d"
+
+description="Executes user programs in ${local_d_dir}"
 
 depend()
 {
@@ -19,12 +22,12 @@ depend()
 
 start()
 {
-	ebegin "Starting local"
-
-	local file has_errors=0 redirect retval
+	local file has_errors redirect retval
+	has_errors=0
 	yesno $rc_verbose || redirect='> /dev/null 2>&1'
+	ebegin "Starting local"
 	eindent
-	for file in @SYSCONFDIR@/local.d/*.start; do
+	for file in "${local_d_dir}"/*.start; do
 		if [ -x "${file}" ]; then
 			vebegin "Executing \"${file}\""
 			eval "${file}" $redirect
@@ -38,32 +41,32 @@ start()
 	eoutdent
 
 	if command -v local_start >/dev/null 2>&1; then
-		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
+		ewarn "\"${conf_d_dir}/local\" should be removed."
 		ewarn "Please move the code from the local_start function"
 		ewarn "to executable scripts with an .start extension"
-		ewarn "in \"@SYSCONFDIR@/local.d\""
+		ewarn "in \"${local_d_dir}\""
 		local_start
 	fi
 
 	eend ${has_errors}
 
 	# We have to end with a zero exit code, because a failed execution
-	# of an executable @SYSCONFDIR@/local.d/*.start file shouldn't result in
+	# of an executable ${local_d_dir}/*.start file shouldn't result in
 	# marking the local service as failed. Otherwise we are unable to
-	# execute any executable @SYSCONFDIR@/local.d/*.stop file, because a failed
+	# execute any executable ${local_d_dir}/*.stop file, because a failed
 	# marked service cannot be stopped (and the stop function would
-	# actually call the executable @SYSCONFDIR@/local.d/*.stop file(s)).
+	# actually call the executable ${local_d_dir}/*.stop file(s)).
 	return 0
 }
 
 stop()
 {
-	ebegin "Stopping local"
-
-	local file has_errors=0 redirect retval
+	local file has_errors redirect retval
+	has_errors=0
 	yesno $rc_verbose || redirect='> /dev/null 2>&1'
+	ebegin "Stopping local"
 	eindent
-	for file in @SYSCONFDIR@/local.d/*.stop; do
+	for file in "${local_d_dir}"/*.stop; do
 		if [ -x "${file}" ]; then
 			vebegin "Executing \"${file}\""
 			eval "${file}" $redirect
@@ -77,16 +80,16 @@ stop()
 	eoutdent
 
 	if command -v local_stop >/dev/null 2>&1; then
-		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
+		ewarn "\"${conf_d_dir}/local\" should be removed."
 		ewarn "Please move the code from the local_stop function"
 		ewarn "to executable scripts with an .stop extension"
-		ewarn "in \"@SYSCONFDIR@/local.d\""
+		ewarn "in \"${local_d_dir}\""
 		local_stop
 	fi
 
 	eend ${has_errors}
 
-	# An executable @SYSCONFDIR@/local.d/*.stop file which failed with a
+	# An executable ${local_d_dir}/*.stop file which failed with a
 	# non-zero exit status is not a reason to mark this service
 	# as failed, therefore we have to end with a zero exit code.
 	return 0

init.d/localmount.in

@@ -14,17 +14,18 @@ description="Mounts disks and swap according to /etc/fstab."
 depend()
 {
 	need fsck
-	use lvm modules mtab
-	after lvm modules
+	use lvm modules root
+	after clock lvm modules root
 	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
+	# The types variable must start with no, and must be a type
 	local critical= types="noproc" x= no_netdev= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
-		types="${types},no${x}"
+		types="${types},${x}"
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
@@ -99,8 +100,8 @@ stop()
 				aufs_branch=$(sed 's/=.*//g' $x)
 				eindent
 				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
-					ewarn "Failed to remove branch $aufs_branch from aufs \
-					$aufs_mount_point"
+					ewarn "Failed to remove branch $aufs_branch from aufs" \
+					"$aufs_mount_point"
 				fi
 				eoutdent
 				sync

init.d/loopback.in

@@ -13,6 +13,7 @@ description="Configures the loopback interface."
 
 depend()
 {
+	after clock
 	keyword -jail -prefix -systemd-nspawn -vserver
 }
 
@@ -21,17 +22,14 @@ start()
 	if [ "$RC_UNAME" = Linux ]; then
 		ebegin "Bringing up network interface lo"
 		if command -v ip > /dev/null 2>&1; then
-			ip addr add 127.0.0.1/8 dev lo brd + scope host
-			ip route add 127.0.0.0/8 dev lo scope host
+			ip addr add 127.0.0.1/8 dev lo brd +
 			ip link set lo up
 		else
 			ifconfig lo 127.0.0.1 netmask 255.0.0.0
-			route add -net 127.0.0.0 netmask 255.0.0.0 gw 127.0.0.1
 		fi
 	else
 		ebegin "Bringing up network interface lo0"
 		ifconfig lo0 127.0.0.1 netmask 255.0.0.0
-		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 127.0.0.1
 	fi
 	eend $?
 }

init.d/modules-load.in

@@ -1,72 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2016 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Loads a list of modules from systemd-compatible locations."
-
-depend()
-{
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
-}
-
-find_modfiles()
-{
-	local dirs="/usr/lib/modules-load.d /run/modules-load.d /etc/modules-load.d"
-	local basenames files fn x y
-	for x in $dirs; do
-		[ ! -d $x ] && continue
-		for y in $x/*.conf; do
-			[ -f $y ] && basenames="${basenames}\n${y##*/}"
-		done
-	done
-	basenames=$(printf "$basenames" | sort -u)
-	for x in $basenames; do
-		for y in $dirs; do
-			[ -r $y/$x ] &&
-				fn=$y/$x
-		done
-		files="$files $fn"
-	done
-	echo $files
-}
-
-load_modules()
-{
-	local file m modules rc x
-	file=$1
-	[ -z "$file" ] && return 0
-	while read m x; do
-		case $m in
-			\;*) continue ;;
-			\#*) continue ;;
-			*) modules="$modules $m"
-			;;
-		esac
-	done < $file
-	for x in $modules; do
-		ebegin "Loading module $x"
-		case "$RC_UNAME" in
-			FreeBSD) kldload "$x"; rc=$? ;;
-			Linux) modprobe --use-blacklist -q "$x"; rc=$? ;;
-			*) ;;
-		esac
-		eend $rc "Failed to load $x"
-	done
-}
-
-start()
-{
-	local x
-	files=$(find_modfiles)
-	for x in $files; do
-		load_modules $x
-	done
-	return 0
-}

init.d/modules.in

@@ -14,10 +14,65 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	want modules-load
+	provide modules-load
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
+find_modfiles()
+{
+	local dirs="/usr/lib/modules-load.d /run/modules-load.d /etc/modules-load.d"
+	local basenames files fn x y
+	for x in $dirs; do
+		[ ! -d $x ] && continue
+		for y in $x/*.conf; do
+			[ -f $y ] && basenames="${basenames}\n${y##*/}"
+		done
+	done
+	basenames=$(printf "$basenames" | sort -u)
+	for x in $basenames; do
+		for y in $dirs; do
+			[ -r $y/$x ] &&
+				fn=$y/$x
+		done
+		files="$files $fn"
+	done
+	echo $files
+}
+
+load_modules()
+{
+	local file m modules rc x
+	file=$1
+	[ -z "$file" ] && return 0
+	while read m x; do
+		case $m in
+			\;*) continue ;;
+			\#*) continue ;;
+			*) modules="$modules $m"
+			;;
+		esac
+	done < $file
+	for x in $modules; do
+		ebegin "Loading module $x"
+		case "$RC_UNAME" in
+			FreeBSD) kldload "$x"; rc=$? ;;
+			Linux) modprobe --use-blacklist -q "$x"; rc=$? ;;
+			*) ;;
+		esac
+		eend $rc "Failed to load $x"
+	done
+}
+
+modules_load_d()
+{
+	local x
+	files=$(find_modfiles)
+	for x in $files; do
+		load_modules $x
+	done
+	return 0
+}
+
 FreeBSD_modules()
 {
 	local cnt=0 x
@@ -31,7 +86,7 @@ FreeBSD_modules()
 
 Linux_modules()
 {
-	# Should not fail if kernel do not have module
+	# Should not fail if kernel does not have module
 	# support compiled in ...
 	[ ! -f /proc/modules ] && return 0
 
@@ -48,22 +103,21 @@ Linux_modules()
 		x=${x%.*}
 	done
 
-	local list= x= xx= y= args= mpargs= cnt=0 a=
+	local list= x= xx= y= args= mpargs= a=
 	for x in $kv_variant_list ; do
 		eval list=\$modules_$(shell_var "$x")
 		[ -n "$list" ] && break
 	done
 	[ -z "$list" ] && list=$modules
 
+	[ -n "$list" ] && ebegin "Loading kernel modules"
 	for x in $list; do
 		a=${x#*:}
 		if [ "$a" = "$x" ]; then
 			unset mpargs
-			ebegin "Loading module $x"
 		else
 			x=${x%%:*}
 			mpargs="-o $a"
-			ebegin "Loading module $x as $a"
 		fi
 		aa=$(shell_var "$a")
 		xx=$(shell_var "$x")
@@ -75,16 +129,18 @@ Linux_modules()
 		done
 		[ -z "$args" ] && eval args=\$module_${aa}_args
 		[ -z "$args" ] && eval args=\$module_${xx}_args
-		eval modprobe --use-blacklist -q "$mpargs" "$x" "$args"
-		eend $? "Failed to load $x" && : $(( cnt += 1 ))
+		eval modprobe --use-blacklist --verbose "$mpargs" "$x" "$args"
 	done
-	einfo "Autoloaded $cnt module(s)"
+	[ -n "$list" ] && eend
 }
 
 start()
 {
 	case "$RC_UNAME" in
-		FreeBSD|Linux) ${RC_UNAME}_modules ;;
+		FreeBSD|Linux) 
+			modules_load_d
+			${RC_UNAME}_modules
+			;;
 		*) ;;
 	esac
 	return 0

init.d/mount-ro.in

@@ -13,7 +13,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 
 depend()
 {
-	need killprocs savecache
+	after killprocs savecache
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
@@ -34,6 +34,9 @@ start()
 
 	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
 	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
+	if [ -e "$rc_svcdir"/usr_premounted ]; then
+		m="$m|/usr"
+	fi
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
 	local IFS="$IFS:"
 	for x in $no_umounts $RC_NO_UMOUNTS; do

init.d/mtab.in

@@ -13,6 +13,8 @@ description="Update /etc/mtab to match what the kernel knows about"
 
 depend()
 {
+	after clock
+	before localmount
 	need root
 	keyword -prefix -systemd-nspawn
 }
@@ -29,6 +31,10 @@ start()
 		einfo "Creating mtab symbolic link"
 		ln -snf /proc/self/mounts /etc/mtab
 	else
+		ewarn "The ${RC_SVCNAME} service will be removed in the future."
+		ewarn "Please change the mtab_is_file setting to no and run"
+		ewarn "# rc-service mtab restart"
+		ewarn "to create the mtab symbolic link."
 		[ -L /etc/mtab ] && ewarn "Removing /etc/mtab symbolic link"
 		rm -f /etc/mtab
 		einfo "Creating mtab file"

init.d/net-online.in

@@ -13,8 +13,9 @@ description="Delays until the network is online or a specific timeout"
 
 depend()
 {
-	after modules
+	after modules net
 	need sysfs
+	provide network-online
 	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
 }
 
@@ -22,28 +23,16 @@ get_interfaces()
 {
 	local ifname iftype
 	for ifname in /sys/class/net/*; do
+		[ -h "${ifname}" ] && continue
 		read iftype < ${ifname}/type
 		[ "$iftype" = "1" ] && printf "%s " ${ifname##*/}
 	done
 }
 
-get_default_gateway()
-{
-	local cmd gateway
-	if command -v ip > /dev/null 2>&1; then
-		cmd="ip route show"
-	else
-		cmd=route
-	fi
-	set -- $($cmd | grep default)
-	[ "$2" != via ] && gateway="$2" || gateway="$3"
-	printf "%s" $gateway
-}
-
 start ()
 {
-	local carriers configured dev gateway ifcount infinite interfaces
-	local rc state timeout x
+	local carriers configured dev gateway ifcount infinite
+	local carrier operstate rc
 
 	ebegin "Checking to see if the network is online"
 	rc=0
@@ -56,20 +45,31 @@ start ()
 	ifcount=0
  	for dev in ${interfaces}; do
 		: $((ifcount += 1))
-		read x < /sys/class/net/$dev/carrier
-		[ $x -eq 1 ] && : $((carriers += 1))
-		read x < /sys/class/net/$dev/operstate
-		[ "$x" = up ] && : $((configured += 1))
+		read carrier < /sys/class/net/$dev/carrier 2> /dev/null ||
+			carrier=
+		[ "$carrier" = 1 ] && : $((carriers += 1))
+		read operstate < /sys/class/net/$dev/operstate 2> /dev/null ||
+			operstate=
+		[ "$operstate" = up ] && : $((configured += 1))
 	done
 	[ $configured -eq $ifcount ] && [ $carriers -ge 1 ] && break
 	sleep 1
 	: $((timeout -= 1))
  done
  ! $infinite && [ $timeout -eq 0 ] && rc=1
- if [ $rc -eq 0 ] && yesno ${ping_default_gateway:-no}; then
- 	gateway="$(get_default_gateway)"
- 	if [ -n "$gateway" ] && ! ping -c 1 $gateway > /dev/null 2>&1; then
-		rc=1
+ include_ping_test=${include_ping_test:-${ping_default_gateway}}
+ if [ -n "${ping_default_gateway}" ]; then
+ ewarn "ping_default_gateway is deprecated, please use include_ping_test"
+ fi
+ if [ $rc -eq 0 ] && yesno ${include_ping_test:-no}; then
+ 	ping_test_host="${ping_test_host:-google.com}"
+ 	if [ -n "$ping_test_host" ]; then
+		while $infinite || [ $timeout -gt 0 ]; do
+			ping -c 1 $ping_test_host > /dev/null 2>&1
+			rc=$?
+			[ $rc -eq 0 ] && break
+			: $((timeout -= 1))
+		done
 	fi
  fi
  eend $rc "The network is offline"

init.d/netmount.in

@@ -20,10 +20,12 @@ depend()
 			*) mywant="$mywant nfsclient"; break ;;
 		esac
 	done
+	after root
  	config /etc/fstab
 	want $mywant
 	use afc-client amd openvpn
 	use dns
+	use root
 	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 

init.d/network.in

@@ -18,7 +18,7 @@ __nl="
 depend()
 {
 	need localmount
-	after bootmisc
+	after bootmisc clock
 	if [ -n "$(interfaces)" ]; then
 		provide net
 	fi
@@ -76,7 +76,7 @@ tentative()
 
 	case "$RC_UNAME" in
 	Linux)
-		[ -x /sbin/ip ] || [ -x /bin/ip ] || return 1
+		[ -n "$(command -v ip)" ] || return 1
 		[ -n "$(ip -f inet6 addr show tentative)" ]
 		;;
 	*)
@@ -174,7 +174,7 @@ runip()
 routeflush()
 {
 	if [ "$RC_UNAME" = Linux ]; then
-		if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
+		if [ -n "$(command -v ip)"  ]; then
 			ip route flush scope global
 			ip route delete default 2>/dev/null
 		else
@@ -346,7 +346,7 @@ stop()
 		then
 			veinfo "$int"
 			runargs /etc/ifdown."$int" "$downcmd"
-			if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
+			if [ -n "$(command -v ip)" ]; then
 				# We need to do this, otherwise we may
 				# fail to add things correctly on restart
 				ip address flush dev "$int" 2>/dev/null

init.d/newsyslog.in

@@ -13,6 +13,7 @@ required_files="/etc/newsyslog.conf"
 
 depend()
 {
+	after clock
 	need localmount
 	keyword -prefix
 }

init.d/numlock.in

@@ -15,7 +15,6 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
-	need localmount
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 

init.d/procfs.in

@@ -13,9 +13,9 @@ description="Mounts misc filesystems in /proc."
 
 depend()
 {
+	after clock
 	use devfs
 	want modules
-	need localmount
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
@@ -26,8 +26,8 @@ start()
 		[ ! -e /proc/sys/fs/binfmt_misc/register ]; then
 		if ! grep -qs binfmt_misc /proc/filesystems &&
 			modprobe -q binfmt-misc; then
-			ewarn "The  binfmt-misc module needs to be configured in \
-				@SYSCONFDIR@/conf.d/modules or built in."
+			ewarn "The binfmt-misc module needs to be loaded by" \
+				"the modules service or built in."
 		fi
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"

init.d/root.in

@@ -13,6 +13,7 @@ description="Mount the root fs read/write"
 
 depend()
 {
+	after clock
 	need fsck
 	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
 }

init.d/savecache.in

@@ -49,7 +49,7 @@ start()
 	fi
 	ebegin "Saving dependency cache"
 	local rc=0 save=
-	for x in shutdowntime softlevel rc.log; do
+	for x in depconfig deptree rc.log shutdowntime softlevel; do
 		[ -e "$RC_SVCDIR/$x" ] && save="$save $RC_SVCDIR/$x"
 	done
 	if [ -n "$save" ]; then

init.d/savecore.in

@@ -14,6 +14,7 @@ description="Saves a kernel dump."
 depend()
 {
 	need dumpon localmount
+	after clock
 	before encswap
 	keyword -jail -prefix
 }

init.d/staticroute.in

@@ -14,9 +14,9 @@
 description="Configures static routes."
 __nl="
 "
-
 depend()
 {
+	after clock
 	provide net
 	use network
 	keyword -jail -prefix -vserver

init.d/swap-blk.in

@@ -11,6 +11,7 @@
 
 depend()
 {
+	after clock
 	before fsck
 	keyword -jail -prefix
 }

init.d/swap.in

@@ -11,6 +11,7 @@
 
 depend()
 {
+	after clock root
 	before localmount
 	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
 }

init.d/swclock.in

@@ -13,7 +13,6 @@ description="Sets the local clock to the mtime of a given file."
 
 depend()
 {
-	before *
 	provide clock
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }

init.d/syscons.in

@@ -10,6 +10,7 @@
 # except according to the terms contained in the LICENSE file.
 
 depend() {
+	after clock
 	need localmount
 	keyword -jail -prefix
 }

init.d/sysctl.in

@@ -11,6 +11,7 @@
 
 depend()
 {
+	after clock
 	before bootmisc logger
 	keyword -prefix -systemd-nspawn -vserver
 }
@@ -20,7 +21,7 @@ BSD_sysctl()
 	[ -e /etc/sysctl.conf ] || return 0
 	local retval=0 var= comments= conf=
 	eindent
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
+	for conf in /etc/sysctl.conf /etc/sysctl.d/*.conf; do
 		if [ -r "$conf" ]; then
 			vebegin "applying $conf"
 			while read var comments; do

init.d/sysfs.in

@@ -15,7 +15,6 @@ sysfs_opts=nodev,noexec,nosuid
 
 depend()
 {
-	want modules
 	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
@@ -98,65 +97,21 @@ mount_misc()
 		fi
 	fi
 
-	# setup up kernel support for efivarfs
-	# slightly complicated, as if it's build as a module but NOT yet loaded,
-	# it will NOT appear in /proc/filesystems yet
-	if [ -d /sys/firmware/efi/efivars ] \
-		&& ! mountinfo -q /sys/firmware/efi/efivars; then
-		if modprobe -q efivarfs; then
-			ewarn "The efivarfs module needs to be configured in \
-				@SYSCONFDIR@/conf.d/modules or built in"
-		fi
-		if grep -qs efivarfs /proc/filesystems; then
-			ebegin "Mounting efivarfs filesystem"
-			mount -n -t efivarfs -o ${sysfs_opts} \
-				efivarfs /sys/firmware/efi/efivars
-			eend $?
-		fi
+	# set up kernel support for efivarfs
+	if [ -d /sys/firmware/efi/efivars ] &&
+		! mountinfo -q /sys/firmware/efi/efivars; then
+		ebegin "Mounting efivarfs filesystem"
+		mount -n -t efivarfs -o ro \
+			efivarfs /sys/firmware/efi/efivars 2> /dev/null
+		eend 0
 	fi
 }
 
-mount_cgroups()
-{
-	# set up kernel support for cgroups
-	if [ -d /sys/fs/cgroup ] && ! mountinfo -q /sys/fs/cgroup; then
-		if grep -qs cgroup /proc/filesystems; then
-			ebegin "Mounting cgroup filesystem"
-			local opts="${sysfs_opts},mode=755,size=${rc_cgroupsize:-10m}"
-			mount -n -t tmpfs -o ${opts} cgroup_root /sys/fs/cgroup
-			eend $?
-		fi
-	fi
-
-	mountinfo -q /sys/fs/cgroup || return 0
-
-	if ! mountinfo -q /sys/fs/cgroup/openrc; then
-		local agent="@LIBEXECDIR@/sh/cgroup-release-agent.sh"
-		mkdir /sys/fs/cgroup/openrc
-		mount -n -t cgroup \
-			-o none,${sysfs_opts},name=openrc,release_agent="$agent" \
-			openrc /sys/fs/cgroup/openrc
-		printf 1 > /sys/fs/cgroup/openrc/notify_on_release
-	fi
-
-	yesno ${rc_controller_cgroups:-YES} && [ -e /proc/cgroups ] || return 0
-	while read name hier groups enabled rest; do
-		case "${enabled}" in
-			1)	mountinfo -q /sys/fs/cgroup/${name} && continue
-				mkdir /sys/fs/cgroup/${name}
-				mount -n -t cgroup -o ${sysfs_opts},${name} \
-					${name} /sys/fs/cgroup/${name}
-				;;
-		esac
-	done < /proc/cgroups
-}
-
 restorecon_sys()
 {
 	if [ -x /sbin/restorecon ]; then
 		ebegin "Restoring SELinux contexts in /sys"
 		restorecon -F /sys/devices/system/cpu/online >/dev/null 2>&1
-		restorecon -rF /sys/fs/cgroup >/dev/null 2>&1
 		eend $?
 	fi
 }
@@ -165,7 +120,6 @@ start()
 {
 	mount_sys
 	mount_misc
-	mount_cgroups
 	restorecon_sys
 	return 0
 }

init.d/syslogd.in

@@ -22,6 +22,6 @@ depend()
 	provide logger
 	use net newsyslog
 	need localmount
-	after bootmisc
+	after bootmisc clock
 	keyword -prefix
 }

init.d/termencoding.in

@@ -18,7 +18,7 @@ depend()
 {
 	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 	use root
-	after bootmisc
+	after bootmisc clock
 }
 
 start()

init.d/tmpfiles.dev.in

@@ -1,20 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright 1999-2012 Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-description="Set up tmpfiles.d entries"
-
-depend()
-{
-	use dev-mount
-	before dev
-	keyword -prefix -vserver
-}
-
-start()
-{
-	ebegin "Setting up tmpfiles.d entries for /dev"
-	@LIBEXECDIR@/sh/tmpfiles.sh --prefix=/dev --create --boot ${tmpfiles_opts}
-	eend $?
-	return 0
-}

init.d/tmpfiles.setup.in

@@ -1,19 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright 1999-2012 Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-description="Set up tmpfiles.d entries"
-
-depend()
-{
-	need localmount
-}
-
-start()
-{
-	ebegin "Setting up tmpfiles.d entries"
-	@LIBEXECDIR@/sh/tmpfiles.sh --exclude-prefix=/dev --create --remove --boot \
-		${tmpfiles_opts}
-	eend $?
-	return 0
-}

init.d/ttys.in

@@ -11,7 +11,7 @@
 
 depend()
 {
-	after fsck
+	after clock fsck
 	keyword -prefix
 }
 

init.d/urandom.in

@@ -14,6 +14,7 @@ description="Initializes the random number generator."
 
 depend()
 {
+	after clock
 	need localmount
 	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn
 }

init.d/wscons.in

@@ -11,6 +11,7 @@
 
 depend()
 {
+	after clock
 	need localmount
 	keyword -prefix
 }

man/Makefile

@@ -6,10 +6,10 @@ MAN3=		einfo.3 \
 		rc_config.3 rc_deptree.3 rc_find_pids.3 rc_plugin_hook.3 \
 		rc_runlevel.3 rc_service.3 rc_stringlist.3
 MAN8=		rc-service.8 rc-status.8 rc-update.8 openrc.8 openrc-run.8 \
-		service.8 start-stop-daemon.8 supervise-daemon.8
+		start-stop-daemon.8 supervise-daemon.8
 
 ifeq (${OS},Linux)
-MAN8 += rc-sstat.8
+MAN8 += rc-sstat.8 openrc-init.8 openrc-shutdown.8
 endif
 
 # Handy macro to create symlinks

man/openrc-init.8

@@ -0,0 +1,46 @@
+.\" Copyright (c) 2017 The OpenRC Authors.
+.\" See the Authors file at the top-level directory of this distribution and
+.\" https://github.com/OpenRC/openrc/blob/master/AUTHORS
+.\"
+.\" This file is part of OpenRC. It is subject to the license terms in
+.\" the LICENSE file found in the top-level directory of this
+.\" distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+.\" This file may not be copied, modified, propagated, or distributed
+.\"    except according to the terms contained in the LICENSE file.
+.\"
+.Dd April 6, 2017
+.Dt openrc-init 8 SMM
+.Os OpenRC
+.Sh NAME
+.Nm openrc-init
+.Nd the parent of all processes
+.Sh SYNOPSIS
+.Nm
+.Sh DESCRIPTION
+.Nm
+is an init process which can be an alternative to sysvinit or any other
+init process.
+.Pp
+To use
+.Nm
+configure your boot loader to invoke it or symlink it to /sbin/init.
+Also, you will need to use
+.Xr openrc-shutdown 8 ,
+to halt, reboot or poweroff the system.
+.Pp
+The default runlevel is read from the init command line, the
+rc_default_runlevel setting in rc.conf, the kernel command line, or it is
+assumed to be "default" if it is not set in any of these places.
+.Pp
+.Nm
+doesn't manage getty's directly, so you will need to manage them another
+way. For example, you can use the agetty service script as described in
+agetty-guide.md in this distribution.
+.Sh BUGS
+This was first released as part of OpenRC 0.25.
+I do not know of any specific issues. However, since this is the first
+release of openrc-init, please test and report any issues you find.
+.Sh SEE ALSO
+.Xr openrc-shutdown 8 ,
+.Sh AUTHORS
+.An William Hubbs <w.d.hubbs@gmail.com>

man/openrc-run.8

@@ -8,7 +8,7 @@
 .\" This file may not be copied, modified, propagated, or distributed
 .\"    except according to the terms contained in the LICENSE file.
 .\"
-.Dd December 31, 2011
+.Dd November 30, 2017
 .Dt openrc-run 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -97,7 +97,7 @@ String describing the extra command.
 .It Ar supervisor
 Supervisor to use to monitor this daemon. If this is unset or invalid,
 start-stop-daemon will be used.
-Currently, we support s6 from scarnet software, and supervise-daemon
+Currently, we support s6 from skarnet software, and supervise-daemon
 which is a light-weight supervisor internal to OpenRC.
 To use s6, set
 supervisor=s6.
@@ -111,11 +111,17 @@ The path to the s6 service directory if you are monitoring this service
 with S6. The default is /var/svc.d/${RC_SVCNAME}.
 .It Ar s6_svwait_options_start
 The options to pass to s6-svwait when starting the service via s6.
+.It Ar s6_force_kill
+Should we force-kill this service if s6_service_timeout_stop expires
+but the service doesn't go down during shutdown? The default is yes.
 .It Ar s6_service_timeout_stop
 The amount of time, in milliseconds, s6-svc should wait for the service
-to go down when stopping the service. The default is 10000.
+to go down when stopping the service. The default is 60000.
 .It Ar start_stop_daemon_args
 List of arguments passed to start-stop-daemon when starting the daemon.
+.It Ar supervise_daemon_args
+List of arguments passed to supervise-daemon when starting the daemon.
+If undefined, start_stop_daemon_args is used as a fallback.
 .It Ar command
 Daemon to start or stop via
 .Nm start-stop-daemon
@@ -139,21 +145,56 @@ List of arguments to pass to the daemon when starting via
 .Nm supervise-daemon .
 to force the daemon to stay in the foreground
 .It Ar command_background
-Set this to "true", "yes" or "1" (case-insensitive) if you want 
+Set this to "true", "yes" or "1" (case-insensitive) if you want
 .Xr start-stop-daemon 8
 to force the daemon into the background. This forces the
 "--make-pidfile" and "--pidfile" options, so the pidfile variable must be set.
 .It Ar command_progress
-Set this to "true", "yes" or "1" (case-insensitive) if you want 
+Set this to "true", "yes" or "1" (case-insensitive) if you want
 .Xr start-stop-daemon 8
 to display a progress meter when waiting for a daemon to stop.
 .It Ar command_user
 If the daemon does not support changing to a different user id, you can
-use this to change the user id before
+use this to change the user id, and optionally group id,  before
 .Xr start-stop-daemon 8
 or
 .Xr supervise-daemon 8
-launches the daemon
+launches the daemon.
+.It Ar output_log
+This is the path to a file or named pipe where the standard output from
+the service will be redirected. If you are starting this service with
+.Xr start-stop-daemon 8 ,
+,  you must set
+.Pa command_background
+to true. Keep in mind that this path will be inside the chroot if the
+.Pa chroot
+variable is set.
+.It Ar error_log
+The same thing as
+.Pa output_log
+but for the standard error output.
+.It Ar output_logger
+This is a process which will be used to log the standard output from the
+service.  If you are starting this service with
+.Xr start-stop-daemon 8 ,
+,  you must set
+.Pa command_background
+to true. Keep in mind that this command must be executable as a shell
+command inside the chroot if the
+.Pa chroot
+variable is set. Keep in mind also that this command works by accepting
+the stdout of the service on stdin.
+An example of a command that can be run this way is logger if you want
+your service output to go to syslog.
+.It Ar error_logger
+The same thing as
+.Pa output_logger
+but for the standard error output.
+.It Ar directory
+.Xr start-stop-daemon 8
+and
+.Xr supervise-daemon 8
+will chdir to this directory before starting the daemon.
 .It Ar chroot
 .Xr start-stop-daemon 8
 and
@@ -167,6 +208,24 @@ Display name used for the above defined command.
 Process name to match when signaling the daemon.
 .It Ar stopsig
 Signal to send when stopping the daemon.
+.It Ar respawn_delay
+Respawn delay
+.Xr supervise-daemon 8
+will use for this daemon.  See
+.Xr supervise-daemon 8
+for more information about this setting.
+.It Ar respawn_max
+Respawn max
+.Xr supervise-daemon 8
+will use for this daemon.  See
+.Xr supervise-daemon 8
+for more information about this setting.
+.It Ar respawn_period
+Respawn period
+.Xr supervise-daemon 8
+will use for this daemon.  See
+.Xr supervise-daemon 8
+for more information about this setting.
 .It Ar retry
 Retry schedule to use when stopping the daemon. It can either be a
 timeout in seconds or multiple signal/timeout pairs (like SIGTERM/5).
@@ -180,6 +239,8 @@ used along with in_background_fake to support re-entrant services.
 .It Ar in_background_fake
 Space separated list of commands which should always succeed when
 in_background is yes.
+.It Ar umask
+Set the umask of the daemon.
 .Pp
 Keep in mind that eval is used to process chroot, command, command_args_*,
 command_user, pidfile and procname. This may affect how they are
@@ -199,8 +260,10 @@ that dependency type to the function, or prefix the names with ! to
 remove them from the dependencies.
 .Bl -tag -width "RC_DEFAULTLEVEL"
 .It Ic need
-The service will refuse to start until needed services have started and it
-will refuse to stop until any services that need it have stopped.
+The service will attempt to start any services it needs regardless of
+whether they have been added to the runlevel. It will refuse to start
+until all services it needs have started, and it will refuse to stop until all
+services that need it have stopped.
 .It Ic use
 The service will attempt to start any services it uses that have been added
 to the runlevel.
@@ -266,6 +329,18 @@ system.
 To see how to influence dependencies in configuration files, see the
 .Sx FILES
 section below.
+.Sh _pre AND _post FUNCTIONS
+Any command defined in extra_commands, extra_started_commands or
+extra_stopped_commands can have _pre and _post functions in the service
+script. If the command function is called foo, the_pre and _post
+functions for it should be called foo_pre and foo_post.
+.Pp
+These functions should be used to perform preparation before the
+command is run and cleanup after the command completes. In order for
+.Nm
+to record the command as being run successfully, the _pre
+function, command function itself and the _post function should all exit
+with a zero return code.
 .Sh BUILTINS
 .Nm
 defines some builtin functions that you can use inside your service scripts:
@@ -394,27 +469,65 @@ If -d, -f or -p is specified, checkpath checks to see if the path
 exists, is the right type and has the correct owner and access modes. If
 any of these tests fail, the path is created and set up as specified. If
 more than one of -d, -f or -p are specified, the last one will be used.
-
+.Pp
 The argument to -m is a three or four digit octal number. If this option
 is not provided, the value defaults to 0644 for files and 0775 for
 directories.
-
+.Pp
 The argument to -o is a representation of the user and/or group which
 should own the path. The user and group can be represented numerically
 or with names, and are separated by a colon.
-
+.Pp
 The truncate options (-D and -F) cause the directory or file to be
 cleared of all contents.
-
+.Pp
 If -W is specified, checkpath checks to see if the first path given on
 the command line is writable.  This is different from how the test
 command in the shell works, because it also checks to make sure the file
 system is not read only.
-
+.Pp
 Also, the -d, -f or -p options should not be specified along with this option.
-
+.Pp
 The -q option suppresses all informational output. If it is specified
 twice, all error messages are suppressed as well.
+.It Xo
+.Ic fstabinfo
+.Op Fl M , -mount
+.Op Fl R , -remount
+.Op Fl b , -blockdevice
+.Op Fl m , -mountargs
+.Op Fl o , -options
+.Op Fl p , -passno Ar passno
+.Op Fl t , -type Ar fstype
+.Ar path
+.Xc
+If -b, -m, -o, -p or -t is specified,the appropriate information is
+extracted from fstab. If -M or -R are given, file systems are mounted or
+remounted.
+.Pp
+The -q option suppresses all informational output. If it is specified
+twice, all error messages are suppressed as well.
+.It Xo
+.Ic mountinfo
+.Op Fl f, -fstype-regex Ar regex
+.Op Fl F, -skip-fstype-regex Ar regex
+.Op Fl n, -node-regex Ar regex
+.Op Fl N, -skip-node-regex Ar regex
+.Op Fl o, -options-regex Ar regex
+.Op Fl O, -skip-options-regex Ar regex
+.Op Fl p, -point-regex Ar regex
+.Op Fl P, -skip-point-regex Ar regex
+.Op Fl e, -netdev
+.Op Fl E, -nonetdev
+.Op Fl i, -options
+.Op Fl s, -fstype
+.Op Fl t, -node
+.Ar mount1 mount2 ...
+.Xc
+The f, F, n, N, o, O, p, P, e and E options specify what you want to
+search for or skip in the mounted file systems. The i, s and t options
+specify what you want to display. If no mount points are given, all
+mount points will be considered.
 .It Ic yesno Ar value
 If
 .Ar value
@@ -501,7 +614,7 @@ rc_net_tap1_provide="!net"
 # It's also possible to negate keywords. This is mainly useful for prefix
 # users testing OpenRC.
 rc_keyword="!-prefix"
-# This can also be used to block a script from runining in all
+# This can also be used to block a script from running in all
 # containers except one or two
 rc_keyword="!-containers !-docker"
 .Ed
@@ -640,6 +753,8 @@ Users are encouraged to use the is_newer_than function which returns correctly.
 .Xr rc_plugin_hook 3 ,
 .Xr sh 1p ,
 .Xr start-stop-daemon 8 ,
+.Xr supervise-daemon 8 ,
 .Xr uname 1
 .Sh AUTHORS
 .An Roy Marples <roy@marples.name>
+.An William Hubbs <w.d.hubbs@gmail.com>

man/openrc-shutdown.8

@@ -0,0 +1,62 @@
+.\" Copyright (c) 2017 The OpenRC Authors.
+.\" See the Authors file at the top-level directory of this distribution and
+.\" https://github.com/OpenRC/openrc/blob/master/AUTHORS
+.\"
+.\" This file is part of OpenRC. It is subject to the license terms in
+.\" the LICENSE file found in the top-level directory of this
+.\" distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+.\" This file may not be copied, modified, propagated, or distributed
+.\"    except according to the terms contained in the LICENSE file.
+.\"
+.Dd May 22, 2017
+.Dt openrc-shutdown 8 SMM
+.Os OpenRC
+.Sh NAME
+.Nm openrc-shutdown
+.Nd bring the system down
+.Sh SYNOPSIS
+.Nm
+.Op Fl d , -no-write
+.Op Fl D , -dry-run
+.Op Fl H , -halt
+.Op Fl k , -kexec
+.Op Fl p , -poweroff
+.Op Fl R , -reexec
+.Op Fl r , -reboot
+.Op Fl s , -single
+.Op Fl w , -write-only
+.Sh DESCRIPTION
+.Nm
+is the utility that communicates with
+.Xr openrc-init 8
+to bring down the system or instruct openrc-init to re-execute itself.
+It supports the following options:
+.Bl -tag -width "poweroff"
+.It Fl d , -no-write
+Do not write the wtmp boot record.
+.It Fl D , -dry-run
+Print the action that would be taken without executing it. This is to
+allow testing.
+.It Fl H , -halt
+Stop all services, kill all remaining processes and halt the system.
+.It Fl k , -kexec
+Stop all services, kill all processes and boot directly into a new
+kernel loaded via
+.Xr kexec 8 .
+.It Fl p , -poweroff
+Stop all services, kill all processes and power off the system.
+.It Fl R , -reexec
+instruct openrc-init to re-exec itself. This should be used after an
+upgrade of OpenRC if you are using openrc-init as your init process.
+.It Fl r , -reboot
+Stop all services, kill all processes and reboot the system.
+.It Fl s , -single
+Stop all services, kill all processes and move to single user mode.
+.It Fl w , -write-only
+Stop all services, kill all processes and move to single user mode.
+.El
+.Sh SEE ALSO
+.Xr openrc-init 8 ,
+.Xr kexec 8 ,
+.Sh AUTHORS
+.An William Hubbs <w.d.hubbs@gmail.com>

man/rc-service.8

@@ -16,6 +16,18 @@
 .Nd locate and run an OpenRC service with the given arguments
 .Sh SYNOPSIS
 .Nm
+.Op Fl c , -ifcrashed
+.Ar service cmd
+.Op Ar ...
+.Nm
+.Fl d , -debug
+.Ar service cmd
+.Op Ar ...
+.Nm
+.Fl D , -nodeps
+.Ar service cmd
+.Op Ar ...
+.Nm
 .Op Fl i , -ifexists
 .Ar service cmd
 .Op Ar ...
@@ -28,9 +40,21 @@
 .Ar service cmd
 .Op Ar ...
 .Nm
+.Op Fl s , -ifstarted
+.Ar service cmd
+.Op Ar ...
+.Nm
+.Op Fl S , -ifstopped
+.Ar service cmd
+.Op Ar ...
+.Nm
 .Fl e , -exists
 .Ar service
 .Nm
+.Fl Z , -dry-run
+.Ar service cmd
+.Op Ar ...
+.Nm
 .Fl l , -list
 .Nm
 .Fl r , -resolve
@@ -64,6 +88,15 @@ return 0 if it can find
 otherwise -1.
 .Fl r , -resolve
 does the same and also prints the full path of the service to stdout.
+.Pp
+.Fl d , -debug
+sets -x when running the service script(s).
+.Pp
+.Fl D , -nodeps
+ignores dependencies when running the service.
+.Pp
+.Fl Z , -dry-run
+displays commands rather than executing them.
 .Sh SEE ALSO
 .Xr openrc 8 ,
 .Xr stdout 3

man/rc-status.8

@@ -25,6 +25,12 @@ in different runlevels.  The default behavior is to show information
 about the current runlevel and any unassigned services that are not stopped,
 but any runlevel can be quickly examined.
 .Pp
+If an active service is being supervised by
+.Xr supervise-daemon 8, 
+the amount of time the daemon has been active along with the number of
+times it has been respawned in the current respawn period will be
+displayed.
+.Pp
 The options are as follows:
 .Bl -tag -width ".Fl test , test string"
 .It Fl a , -all
@@ -57,5 +63,6 @@ dependency order if the dependency tree is available.
 .Sh SEE ALSO
 .Xr openrc 8 ,
 .Xr rc-update 8
+.Xr supervise-daemon 8
 .Sh AUTHORS
 .An Roy Marples <roy@marples.name>

man/service.8

@@ -1 +0,0 @@
-.so rc-service.8

man/start-stop-daemon.8

@@ -55,7 +55,7 @@ is used.
 .It Fl p , -pidfile Ar pidfile
 When starting, we expect the daemon to create a valid
 .Ar pidfile
-within a reasonable amount of time. When stopping we only stop the pid(s)
+within a reasonable amount of time. When stopping we only stop the first pid
 listed in the
 .Ar pidfile .
 .It Fl n , -name Ar name
@@ -131,9 +131,34 @@ Modifies the scheduling priority of the daemon.
 .It Fl 1 , -stdout Ar logfile
 Redirect the standard output of the process to logfile when started with
 .Fl background .
-Must be an absolute pathname, but relative to the path optionally given with
+The logfile Must be an absolute pathname, but relative to the path
+optionally given with
 .Fl r , -chroot .
 The logfile can also be a named pipe.
+.It Fl 2 , -stderr Ar logfile
+Redirect the standard error of the process to logfile when started with
+.Fl background .
+The logfile must be an absolute pathname, but relative to the path
+optionally given with
+.Fl r , -chroot .
+The logfile can also be a named pipe.
+.It Fl 3 , -stdout-logger Ar cmd
+Run cmd as a child process redirecting the standard output to the
+standard input of cmd when started with
+.Fl background .
+Cmd must be an absolute pathname, but relative to the path optionally given with
+.Fl r , -chroot .
+This process must be prepared to accept input on stdin and be able to
+log it or send it to another location.
+.It Fl 4 , -stderr-logger Ar cmd
+Run cmd as a child process and 
+Redirect the standard error of the process to the standard input of cmd
+when started with
+.Fl background .
+Cmd must be an absolute pathname, but relative to the path optionally given with
+.Fl r , -chroot .
+This process must be prepared to accept input on stdin and be able to
+log it or send it to another location.
 .It Fl w , -wait Ar milliseconds
 Wait
 .Ar milliseconds
@@ -151,6 +176,7 @@ These options are only used for stopping daemons:
 .It Fl R , -retry Ar timeout | Ar signal Ns / Ns Ar timeout
 The retry specification can be either a timeout in seconds or multiple
 signal/timeout pairs (like SIGTERM/5).
+If this option is not given, the default is SIGTERM/5.
 .El
 .Sh ENVIRONMENT
 .Va SSD_IONICELEVEL

man/supervise-daemon.8

@@ -16,6 +16,8 @@
 .Nd starts a daemon and restarts it if it crashes
 .Sh SYNOPSIS
 .Nm
+.Fl D , -respawn-delay
+.Ar seconds
 .Fl d , -chdir
 .Ar path
 .Fl e , -env
@@ -26,14 +28,20 @@
 .Ar arg
 .Fl k , -umask
 .Ar value
+.Fl m , -respawn-max
+.Ar count
 .Fl N , -nicelevel
 .Ar level
 .Fl p , -pidfile
 .Ar pidfile
-.Fl u , -user
-.Ar user
+.Fl P , -respawn-period
+.Ar seconds
+.Fl R , -retry
+.Ar arg
 .Fl r , -chroot
 .Ar chrootpath
+.Fl u , -user
+.Ar user
 .Fl 1 , -stdout
 .Ar logfile
 .Fl 2 , -stderr
@@ -82,6 +90,9 @@ Print the action(s) that are taken just before doing them.
 .Pp
 The options are as follows:
 .Bl -tag -width indent
+.It Fl D , -respawn-delay Ar seconds
+wait this number of seconds before restarting a daemon after it crashes.
+The default is 0.
 .It Fl d , -chdir Ar path
 chdir to this directory before starting the daemon.
 .It Fl e , -env Ar VAR=VALUE
@@ -94,8 +105,22 @@ Class can be 0 for none, 1 for real time, 2 for best effort and 3 for idle.
 Data can be from 0 to 7 inclusive.
 .It Fl k , -umask Ar mode
 Set the umask of the daemon.
+.It Fl m , -respawn-max Ar count
+Sets the maximum number of times a daemon will be respawned during a
+respawn period. If a daemon dies more than this number of times during a
+respawn period,
+.Nm
+will give up trying to respawn it and exit. The default is 10, and 0
+means unlimited.
 .It Fl N , -nicelevel Ar level
 Modifies the scheduling priority of the daemon.
+.It Fl P , -respawn-period Ar seconds
+Sets the length of a respawn period. The default is 10 seconds. See the
+description of --respawn-max for more information.
+.It Fl R , -retry Ar timeout | Ar signal Ns / Ns Ar timeout
+The retry specification can be either a timeout in seconds or multiple
+signal/timeout pairs (like SIGTERM/5).
+If this option is not given, the default is SIGTERM/5.
 .It Fl r , -chroot Ar path
 chroot to this directory before starting the daemon. All other paths, such
 as the path to the daemon, chdir and pidfile, should be relative to the chroot.
@@ -111,6 +136,7 @@ The same thing as
 .Fl 1 , -stdout
 but with the standard error output.
 .El
+.El
 .Sh ENVIRONMENT
 .Va SSD_NICELEVEL
 can also set the scheduling priority of the daemon, but the command line
@@ -123,6 +149,15 @@ to parse its options, which allows it to accept the `--' option which will
 cause it to stop processing options at that point. Any subsequent arguments
 are passed as arguments to the daemon to start and used when finding a daemon
 to stop or signal.
+.Sh NOTE
+If respawn-delay, respawn-max and respawn-period are not set correctly,
+it is possible to trigger a situation in which the supervisor will
+infinitely try to respawn a daemon. To avoid this, if you change the
+values of --respawn-delay, --respawn-max or --respawn-period, always
+make sure the settings mmake sense. For example, a respawn period of 5
+seconds with a respawn max of 10 and a respawn delay of 1 second leads
+to infinite respawning since there can never be 10 respawns within 5
+seconds.
 .Sh SEE ALSO
 .Xr chdir 2 ,
 .Xr chroot 2 ,

mk/cc.mk

@@ -26,7 +26,8 @@ _CCFLAGS=	-Wall -Wextra -Wimplicit -Wshadow -Wformat=2 \
 		-Wnested-externs \
 		-Winline -Wwrite-strings -Wcast-align -Wcast-qual \
 		-Wpointer-arith \
-		-Wdeclaration-after-statement -Wsequence-point
+		-Wdeclaration-after-statement -Wsequence-point \
+		-Werror=implicit-function-declaration
 
 # We should be using -Wredundant-decls, but our library hidden proto stuff
 # gives loads of warnings. I don't fully understand it (the hidden proto,

mk/os-FreeBSD.mk

@@ -11,3 +11,5 @@
 # Generic definitions
 
 include ${MK}/os-BSD.mk
+
+CPPFLAGS+=	-D_BSD_SOURCE

mk/os-GNU-kFreeBSD.mk

@@ -13,6 +13,6 @@
 SFX=		.GNU-kFreeBSD.in
 PKG_PREFIX?=	/usr
 
-CPPFLAGS+=	-D_BSD_SOURCE -D_XOPEN_SOURCE=700
+CPPFLAGS+=	-D_BSD_SOURCE
 LIBDL=		-Wl,-Bdynamic -ldl
 LIBKVM?=

mk/os-GNU.mk

@@ -11,5 +11,5 @@
 SFX=		.GNU.in
 PKG_PREFIX?=	/usr
 
-CPPFLAGS+=	-D_BSD_SOURCE -D_XOPEN_SOURCE=700 -DMAXPATHLEN=4096 -DPATH_MAX=4096
+CPPFLAGS+=	-D_DEFAULT_SOURCE -DMAXPATHLEN=4096 -DPATH_MAX=4096
 LIBDL=		-Wl,-Bdynamic -ldl

mk/os-Linux.mk

@@ -11,7 +11,7 @@
 SFX=		.Linux.in
 PKG_PREFIX?=	/usr
 
-CPPFLAGS+=	-D_BSD_SOURCE -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=700
+CPPFLAGS+=	-D_DEFAULT_SOURCE -D_POSIX_C_SOURCE=200809L
 LIBDL=		-Wl,-Bdynamic -ldl
 
 ifeq (${MKSELINUX},yes)

mk/sys.mk

@@ -34,6 +34,7 @@ PICFLAG?=		-fPIC
 SYSCONFDIR?=		${PREFIX}/etc
 INITDIR?=		${SYSCONFDIR}/init.d
 CONFDIR?=		${SYSCONFDIR}/conf.d
+CONFMODE?=		0644
 LOCALDIR?=		${SYSCONFDIR}/local.d
 SYSCTLDIR?=		${SYSCONFDIR}/sysctl.d
 
@@ -44,22 +45,27 @@ SBINDIR?=		${PREFIX}/sbin
 SBINMODE?=		0755
 
 INCDIR?=		${UPREFIX}/include
-INCMODE?=		0444
+INCMODE?=		0644
 
 _LIBNAME_SH=		case `readlink /lib` in /lib64|lib64) echo "lib64";; *) echo "lib";; esac
 _LIBNAME:=		$(shell ${_LIBNAME_SH})
 LIBNAME?=		${_LIBNAME}
 LIBDIR?=		${UPREFIX}/${LIBNAME}
-LIBMODE?=		0444
+LIBMODE?=		0644
 SHLIBDIR?=		${PREFIX}/${LIBNAME}
 
 LIBEXECDIR?=		${PREFIX}/libexec/rc
 
 MANPREFIX?=		${UPREFIX}/share
 MANDIR?=		${MANPREFIX}/man
-MANMODE?=		0444
+MANMODE?=		0644
+
+BASHCOMPDIR?=		${UPREFIX}/share/bash-completion/completions
+
+DATADIR?=		${UPREFIX}/share/openrc
+DATAMODE?=		0644
 
 DOCDIR?=		${UPREFIX}/share/doc
 DOCMODE?=		0644
 
-CONFMODE?=		0644
+ZSHCOMPDIR?=		${UPREFIX}/share/zsh/site-functions

runit-guide.md

@@ -1,4 +1,5 @@
-# Using runit with OpenRC
+Using runit with OpenRC
+=======================
 
 Beginning with OpenRC-0.21, we support using runit [1] in place of
 start-stop-daemon for monitoring and restarting daemons.

runlevels/Makefile

@@ -36,10 +36,9 @@ BOOT-FreeBSD+=	hostid modules newsyslog savecore syslogd
 # FreeBSD specific stuff
 BOOT-FreeBSD+=	adjkerntz dumpon syscons
 
-BOOT-Linux+=	binfmt hwclock keymaps modules mtab procfs termencoding \
-	tmpfiles.setup
+BOOT-Linux+=	binfmt hwclock keymaps modules mtab procfs termencoding
 SHUTDOWN-Linux=	killprocs mount-ro
-SYSINIT-Linux=	devfs dmesg sysfs tmpfiles.dev
+SYSINIT-Linux=	devfs cgroups dmesg sysfs
 
 # Generic BSD stuff
 BOOT-NetBSD+=	hostid newsyslog savecore syslogd

s6-guide.md

@@ -1,4 +1,5 @@
-# Using S6 with OpenRC
+Using S6 with OpenRC
+====================
 
 Beginning with OpenRC-0.16, we support using the s6 supervision suite
 from Skarnet Software in place of start-stop-daemon for monitoring
@@ -39,6 +40,10 @@ s6_service_path - the path to the s6 service directory. The default is
 s6_svwait_options_start - the options to pass to s6-svwait when starting
 the service. If this is not set, s6-svwait will not be called.
 
+s6_force_kill - Should we try to force kill this service if the
+s6_service_timeout_stop timeout expires when shutting down this service?
+The default is yes.
+
 s6_service_timeout_stop - the amount of time, in milliseconds, s6-svc
 should wait for a service to go down when stopping.
 

scripts/.gitignore

@@ -1 +1,5 @@
+halt
+poweroff
 rc-sstat
+reboot
+shutdown

scripts/Makefile

@@ -8,12 +8,23 @@ INSTALLAFTER = _installafter
 ifeq (${OS},Linux)
 SRCS+= rc-sstat.in
 BIN+=	rc-sstat
+ifeq (${MKSYSVINIT},yes)
+SRCS+= halt.in poweroff.in reboot.in shutdown.in
+BIN+=	halt poweroff reboot shutdown
+	endif
 endif
 
 _installafter:
 ifeq (${OS},Linux)
 	${INSTALL} -d ${DESTDIR}${SBINDIR}
-	ln -s ${DIR}/rc-sstat ${DESTDIR}/${SBINDIR}/rc-sstat
+	ln -sf ${DIR}/rc-sstat ${DESTDIR}/${SBINDIR}/rc-sstat
+ifeq (${MKSYSVINIT},yes)
+	ln -sf	${DIR}/halt ${DESTDIR}/${SBINDIR}/halt
+	ln -sf	${DIR}/poweroff ${DESTDIR}/${SBINDIR}/poweroff
+	ln -sf	${DIR}/reboot ${DESTDIR}/${SBINDIR}/reboot
+	ln -sf	${DIR}/shutdown ${DESTDIR}/${SBINDIR}/shutdown
+	ln -sf	openrc-init ${DESTDIR}/${SBINDIR}/init
+endif
 endif
 
 include ${MK}/scripts.mk

scripts/halt.in

@@ -0,0 +1,24 @@
+#!@SHELL@
+
+option_arg=
+poweroff_arg=
+while getopts :nwdfiph opt; do
+	case "$opt" in
+		n) ;;
+		w) poweroff_arg=--write-only ;;
+		d) option_arg=--no-write ;;
+		f) ;;
+		i) ;;
+		p) poweroff_arg=--poweroff ;;
+		[?]) printf "%s\n" "${0##*/}: invalid command line option" >&2
+		exit 1
+		;;
+	esac
+done
+shift $((OPTIND-1))
+
+if [ -z "${poweroff_arg}" ]; then
+	poweroff_arg=--poweroff
+fi
+
+exec @SBINDIR@/openrc-shutdown ${option_arg} ${poweroff_arg} "$@"

scripts/poweroff.in

@@ -0,0 +1,23 @@
+#!@SHELL@
+
+option_arg=
+poweroff_arg=
+while getopts :nwdfiph opt; do
+	case "$opt" in
+		n) ;;
+		w) poweroff_arg=--write-only ;;
+		d) option_arg=--no-write ;;
+		f) ;;
+		i) ;;
+		[?]) printf "%s\n" "${0##*/}: invalid command line option" >&2
+		exit 1
+		;;
+	esac
+done
+shift $((OPTIND-1))
+
+if [ -z "${poweroff_arg}" ]; then
+	poweroff_arg=--poweroff
+fi
+
+exec @SBINDIR@/openrc-shutdown ${option_arg} ${poweroff_arg} "$@"

scripts/reboot.in

@@ -0,0 +1,25 @@
+#!@SHELL@
+
+option_arg=
+poweroff_arg=
+while getopts :nwdfhik opt; do
+	case "$opt" in
+		n) ;;
+		w) poweroff_arg=--write-only ;;
+		d) option_arg=--no-write ;;
+		f) ;;
+		h) ;;
+		i) ;;
+		k) poweroff_arg=--kexec ;;
+		[?]) printf "%s\n" "${0##*/}: invalid command line option" >&2
+		exit 1
+		;;
+	esac
+done
+shift $((OPTIND-1))
+
+if [ -z "${poweroff_arg}" ]; then
+	poweroff_arg=--reboot
+fi
+
+exec @SBINDIR@/openrc-shutdown ${option_arg} ${poweroff_arg} "$@"

scripts/shutdown.in

@@ -0,0 +1,29 @@
+#!@SHELL@
+
+shutdown_arg=
+while getopts :akrhPHfFnct: opt; do
+	case "$opt" in
+		a) ;;
+		k) ;;
+		r) shutdown_arg=--reboot ;;
+		h) shutdown_arg=--halt ;;
+		P) shutdown_arg=--poweroff ;;
+		H) shutdown_arg=--halt ;;
+		f) ;;
+		F) ;;
+		n) ;;
+		c) ;;
+		t) ;;
+		[?]) printf "%s\n" "${0##*/}: invalid command line option" >&2
+		exit 1
+		;;
+	esac
+done
+shift $((OPTIND-1))
+
+if [ -z "${shutdown_arg}" ]; then
+	shutdown_arg=--single
+fi
+
+echo @SBINDIR@/openrc-shutdown ${shutdown_arg} "$@"
+exec @SBINDIR@/openrc-shutdown ${shutdown_arg} "$@"

service-script-guide.md

@@ -0,0 +1,495 @@
+OpenRC Service Script Writing Guide
+===================================
+
+This document is aimed at developers or packagers who
+write OpenRC service scripts, either for their own projects, or for
+the packages they maintain. It contains advice, suggestions, tips,
+tricks, hints, and counsel; cautions, warnings, heads-ups,
+admonitions, proscriptions, enjoinders, and reprimands.
+
+It is intended to prevent common mistakes that are found "in the wild"
+by pointing out those mistakes and suggesting alternatives.  Each
+good/bad thing that you should/not do has a section devoted to it. We
+don't consider anything exotic, and assume that you will use
+start-stop-daemon to manage a fairly typical long-running UNIX
+process.
+
+# Syntax of Service Scripts
+
+Service scripts are shell scripts. OpenRC aims at using only the standardized 
+POSIX sh subset for portability reasons. The default interpreter (build-time 
+toggle) is `/bin/sh`, so using for example mksh is not a problem.
+
+OpenRC has been tested with busybox sh, ash, dash, bash, mksh, zsh and possibly 
+others. Using busybox sh has been difficult as it replaces commands with 
+builtins that don't offer the expected features.
+
+The interpreter for service scripts is `#!/sbin/openrc-run`.
+Not using this interpreter will break the use of dependencies and is not 
+supported. (iow: if you insist on using `#!/bin/sh` you're on your own)
+
+A `depend` function declares the dependencies of this service script.
+All scripts must have start/stop/status functions, but defaults are
+provided and should be used unless you have a very strong reason not to
+use them.
+
+Extra functions can be added easily:
+
+```
+extra_commands="checkconfig"
+checkconfig() {
+	doSomething
+}
+```
+
+This exports the checkconfig function so that `/etc/init.d/someservice 
+checkconfig` will be available, and it "just" runs this function.
+
+While commands defined in `extra_commands` are always available, commands
+defined in `extra_started_commands` will only work when the service is started
+and those defined in `extra_stopped_commands` will only work when the service is
+stopped. This can be used for implementing graceful reload and similar
+behaviour.
+
+Adding a restart function will not work, this is a design decision within 
+OpenRC. Since there may be dependencies involved (e.g. network -> apache) a 
+restart function is in general not going to work. 
+restart is internally mapped to `stop()` + `start()` (plus handling dependencies).
+If a service needs to behave differently when it is being restarted vs
+started or stopped, it should test the `$RC_CMD` variable, for example:
+
+```
+[ "$RC_CMD" = restart ] && do_something
+```
+
+# The Depend Function
+
+This function declares the dependencies for a service script. This
+determines the order the service scripts start.
+
+```
+depend() {
+	need net
+	use dns logger netmount
+	want coolservice
+}
+```
+
+`need` declares a hard dependency - net always needs to be started before this 
+	service does
+
+`use` is a soft dependency - if dns, logger or netmount is in this runlevel 
+	start it before, but we don't care if it's not in this runlevel.
+	`want` is between need and use - try to start coolservice if it is
+	installed on the system, regardless of whether it is in the
+	runlevel, but we don't care if it starts.
+
+`before` declares that we need to be started before another service
+
+`after` declares that we need to be started after another service, without 
+	creating a dependency (so on calling stop the two are independent)
+
+`provide` allows multiple implementations to provide one service type, e.g.:
+	`provide cron` is set in all cron-daemons, so any one of them started 
+	satisfies a cron dependency
+
+`keyword` allows platform-specific overrides, e.g. `keyword -lxc` makes this 
+	service script a noop in lxc containers. Useful for things like keymaps, 
+	module loading etc. that are either platform-specific or not available 
+	in containers/virtualization/...
+
+FIXME: Anything missing in this list?
+
+# The Default Functions
+
+All service scripts are assumed to have the following functions:
+
+```
+start()
+stop()
+status()
+```
+
+There are default implementations in `lib/rc/sh/openrc-run.sh` - this allows very 
+compact service scripts. These functions can be overridden per service script as 
+needed.
+
+The default functions assume the following variables to be set in the service 
+script:
+
+```
+command=
+command_args=
+pidfile=
+```
+
+Thus the 'smallest' service scripts can be half a dozen lines long
+
+## Don't write your own start/stop functions
+
+OpenRC is capable of stopping and starting most daemons based on the
+information that you give it. For a well-behaved daemon that
+backgrounds itself and writes its own PID file by default, the
+following OpenRC variables are likely all that you'll need:
+
+  * command
+  * command_args
+  * pidfile
+
+Given those three pieces of information, OpenRC will be able to start
+and stop the daemon on its own. The following is taken from an
+[OpenNTPD](http://www.openntpd.org/) service script:
+
+```sh
+command="/usr/sbin/ntpd"
+
+# The special RC_SVCNAME variable contains the name of this service.
+pidfile="/run/${RC_SVCNAME}.pid"
+command_args="-p ${pidfile}"
+```
+
+If the daemon runs in the foreground by default but has options to
+background itself and to create a pidfile, then you'll also need
+
+  * command_args_background
+
+That variable should contain the flags needed to background your
+daemon, and to make it write a PID file. Take for example the
+following snippet of an
+[NRPE](https://github.com/NagiosEnterprises/nrpe) service script:
+
+```sh
+command="/usr/bin/nrpe"
+command_args="--config=/etc/nagios/nrpe.cfg"
+command_args_background="--daemon"
+pidfile="/run/${RC_SVCNAME}.pid"
+```
+
+Since NRPE runs as *root* by default, it needs no special permissions
+to write to `/run/nrpe.pid`. OpenRC takes care of starting and
+stopping the daemon with the appropriate arguments, even passing the
+`--daemon` flag during startup to force NRPE into the background (NRPE
+knows how to write its own PID file).
+
+But what if the daemon isn't so well behaved? What if it doesn't know
+how to background itself or create a pidfile? If it can do neither,
+then use,
+
+  * command_background=true
+
+which will additionally pass `--make-pidfile` to start-stop-daemon,
+causing it to create the `$pidfile` for you (rather than the daemon
+itself being responsible for creating the PID file).
+
+If your daemon doesn't know how to change its own user or group, then
+you can tell start-stop-daemon to launch it as an unprivileged user
+with
+
+  * command_user="user:group"
+
+Finally, if your daemon always forks into the background but fails to
+create a PID file, then your only option is to use
+
+  * procname
+
+With `procname`, OpenRC will try to find the running daemon by
+matching the name of its process. That's not so reliable, but daemons
+shouldn't background themselves without creating a PID file in the
+first place. The next example is part of the [CA NetConsole
+Daemon](https://oss.oracle.com/projects/cancd/) service script:
+
+```sh
+command="/usr/sbin/cancd"
+command_args="-p ${CANCD_PORT}
+              -l ${CANCD_LOG_DIR}
+              -o ${CANCD_LOG_FORMAT}"
+command_user="cancd"
+
+# cancd daemonizes itself, but doesn't write a PID file and doesn't
+# have an option to run in the foreground. So, the best we can do
+# is try to match the process name when stopping it.
+procname="cancd"
+```
+
+To recap, in order of preference:
+
+  1. If the daemon backgrounds itself and creates its own PID file, use
+     `pidfile`.
+  2. If the daemon does not background itself (or has an option to run
+     in the foreground) and does not create a PID file, then use
+     `command_background=true` and `pidfile`.
+  3. If the daemon backgrounds itself and does not create a PID file,
+     use `procname` instead of `pidfile`. But, if your daemon has the
+     option to run in the foreground, then you should do that instead
+     (that would be the case in the previous item).
+  4. The last case, where the daemon does not background itself but
+     does create a PID file, doesn't make much sense. If there's a way
+     to disable the daemon's PID file (or, to write it straight into the
+     garbage), then do that, and use `command_background=true`.
+
+## Reloading your daemon's configuration
+
+Many daemons will reload their configuration files in response to a
+signal. Suppose your daemon will reload its configuration in response
+to a `SIGHUP`. It's possible to add a new "reload" command to your
+service script that performs this action. First, tell the service
+script about the new command.
+
+```sh
+extra_started_commands="reload"
+```
+
+We use `extra_started_commands` as opposed to `extra_commands` because
+the "reload" action is only valid while the daemon is running (that
+is, started). Now, start-stop-daemon can be used to send the signal to
+the appropriate process (assuming you've defined the `pidfile`
+variable elsewhere):
+
+```sh
+reload() {
+  ebegin "Reloading ${RC_SVCNAME}"
+  start-stop-daemon --signal HUP --pidfile "${pidfile}"
+  eend $?
+}
+```
+
+## Don't restart/reload with a broken config
+
+Often, users will start a daemon, make some configuration change, and
+then attempt to restart the daemon. If the recent configuration change
+contains a mistake, the result will be that the daemon is stopped but
+then cannot be started again (due to the configuration error). It's
+possible to prevent that situation with a function that checks for
+configuration errors, and a combination of the `start_pre` and
+`stop_pre` hooks.
+
+```sh
+checkconfig() {
+  # However you want to check this...
+}
+
+start_pre() {
+  # If this isn't a restart, make sure that the user's config isn't
+  # busted before we try to start the daemon (this will produce
+  # better error messages than if we just try to start it blindly).
+  #
+  # If, on the other hand, this *is* a restart, then the stop_pre
+  # action will have ensured that the config is usable and we don't
+  # need to do that again.
+  if [ "${RC_CMD}" != "restart" ] ; then
+    checkconfig || return $?
+  fi
+}
+
+stop_pre() {
+  # If this is a restart, check to make sure the user's config
+  # isn't busted before we stop the running daemon.
+  if [ "${RC_CMD}" = "restart" ] ; then
+      checkconfig || return $?
+  fi
+}
+```
+
+To prevent a *reload* with a broken config, keep it simple:
+
+```sh
+reload() {
+  checkconfig || return $?
+  ebegin "Reloading ${RC_SVCNAME}"
+  start-stop-daemon --signal HUP --pidfile "${pidfile}"
+  eend $?
+}
+```
+
+## PID files should be writable only by root
+
+PID files must be writable only by *root*, which means additionally
+that they must live in a *root*-owned directory. This directory is
+normally /run under Linux and /var/run under other operating systems.
+
+Some daemons run as an unprivileged user account, and create their PID
+files (as the unprivileged user) in a path like
+`/var/run/foo/foo.pid`. That can usually be exploited by the unprivileged
+user to kill *root* processes, since when a service is stopped, *root*
+usually sends a SIGTERM to the contents of the PID file (which are
+controlled by the unprivileged user). The main warning sign for that
+problem is using `checkpath` to set ownership on the directory
+containing the PID file. For example,
+
+```sh
+# BAD BAD BAD BAD BAD BAD BAD BAD
+start_pre() {
+  # Ensure that the pidfile directory is writable by the foo user/group.
+  checkpath --directory --mode 0700 --owner foo:foo "/var/run/foo"
+}
+# BAD BAD BAD BAD BAD BAD BAD BAD
+```
+
+If the *foo* user owns `/var/run/foo`, then he can put whatever he wants
+in the `/var/run/foo/foo.pid` file. Even if *root* owns the PID file, the
+*foo* user can delete it and replace it with his own. To avoid
+security concerns, the PID file must be created as *root* and live in
+a *root*-owned directory. If your daemon is responsible for forking
+and writing its own PID file but the PID file is still owned by the
+unprivileged runtime user, then you may have an upstream issue.
+
+Once the PID file is being created as *root* (before dropping
+privileges), it can be written directly to a *root*-owned
+directory.  For example, the *foo* daemon might write
+`/var/run/foo.pid`. No calls to checkpath are needed. Note: there is
+nothing technically wrong with using a directory structure like
+`/var/run/foo/foo.pid`, so long as *root* owns the PID file and the
+directory containing it.
+
+Ideally (see "Upstream your service scripts"), your service script
+will be integrated upstream and the build system will determine the
+appropriate directory for the pid file. For example,
+
+```sh
+pidfile="@piddir@/${RC_SVCNAME}.pid"
+```
+
+A decent example of this is the [Nagios core service
+script](https://github.com/NagiosEnterprises/nagioscore/blob/master/openrc-init.in),
+where the full path to the PID file is specified at build-time.
+
+## Don't let the user control the PID file location
+
+It's usually a mistake to let the end user control the PID file
+location through a conf.d variable, for a few reasons:
+
+  1. When the PID file path is controlled by the user, you need to
+     ensure that its parent directory exists and is writable. This
+     adds unnecessary code to the service script.
+
+  2. If the PID file path changes while the service is running, then
+     you'll find yourself unable to stop the service.
+
+  3. The directory that should contain the PID file is best determined
+     by the upstream build system (see "Upstream your service scripts").
+     On Linux, the preferred location these days is `/run`. Other systems
+     still use `/var/run`, though, and a `./configure` script is the
+     best place to decide which one you want.
+
+  4. Nobody cares where the PID file is located, anyway.
+
+Since OpenRC service names must be unique, a value of
+
+```sh
+pidfile="/var/run/${RC_SVCNAME}.pid"
+```
+
+guarantees that your PID file has a unique name.
+
+## Upstream your service scripts (for packagers)
+
+The ideal place for an OpenRC service script is **upstream**. Much like
+systemd services, a well-crafted OpenRC service script should be
+distribution-agnostic, and the best place for it is upstream. Why? For
+two reasons. First, having it upstream means that there's a single
+authoritative source for improvements. Second, a few paths in every
+service script are dependent upon flags passed to the build system. For
+example,
+
+```sh
+command=/usr/bin/foo
+```
+
+in an autotools-based build system should really be
+
+```sh
+command=@bindir@/foo
+```
+
+so that the user's value of `--bindir` is respected. If you keep the
+service script in your own distribution's repository, then you have to
+keep the command path and package synchronized yourself, and that's no
+fun.
+
+## Be wary of "need net" dependencies
+
+There are two things you need to know about "need net" dependencies:
+
+  1. They are not satisfied by the loopback interface, so "need net"
+     requires some *other* interface to be up.
+
+  2. Depending on the value of `rc_depend_strict` in `rc.conf`, the
+     "need net" will be satisfied when either *any* non-loopback
+     interface is up, or when *all* non-loopback interfaces are up.
+
+The first item means that "need net" is wrong for daemons that are
+happy with `0.0.0.0`, and the second point means that "need net" is
+wrong for daemons that need a particular (for example, the WAN)
+interface. We'll consider the two most common users of "need net";
+network clients who access some network resource, and network servers
+who provide them.
+
+### Network clients
+
+Network clients typically want the WAN interface to be up. That may
+tempt you to depend on the WAN interface; but first, you should ask
+yourself a question: does anything bad happen if the WAN interface is
+not available? In other words, if the administrator wants to disable
+the WAN, should the service be stopped? Usually the answer to that
+question is "no," and in that case, you should forego the "net"
+dependency entirely.
+
+Suppose, for example, that your service retrieves virus signature
+updates from the internet. In order to do its job correctly, it needs
+a (working) internet connection. However, the service itself does not
+require the WAN interface to be up: if it is, great; otherwise, the
+worst that will happen is that a "server unavailable" warning will be
+logged. The signature update service will not crash, and—perhaps more
+importantly—you don't want it to terminate if the administrator turns
+off the WAN interface for a second.
+
+### Network servers
+
+Network servers are generally easier to handle than their client
+counterparts. Most server daemons listen on `0.0.0.0` (all addresses)
+by default, and are therefore satisfied to have the loopback interface
+present and operational. OpenRC ships with the loopback service in the
+*boot* runlevel, and therefore most server daemons require no further
+network dependencies.
+
+The exceptions to this rule are those daemons who produce negative
+side-effects when the WAN is unavailable. For example, the Nagios
+server daemon will generate "the sky is falling" alerts for as long as
+your monitored hosts are unreachable. So in that case, you should
+require some other interface (often the WAN) to be up. A "need"
+dependency would be appropriate, because you want Nagios to be
+stopped before the network is taken down.
+
+If your daemon can optionally be configured to listen on a particular
+interface, then please see the "Depending on a particular interface"
+section.
+
+### Depending on a particular interface
+
+If you need to depend on one particular interface, usually it's not
+easy to determine programmatically what that interface is. For
+example, if your *sshd* daemon listens on `192.168.1.100` (rather than
+`0.0.0.0`), then you have two problems:
+
+  1. Parsing `sshd_config` to figure that out; and
+
+  2. Determining which network service name corresponds to the
+     interface for `192.168.1.100`.
+
+It's generally a bad idea to parse config files in your service
+scripts, but the second problem is the harder one. Instead, the most
+robust (i.e. the laziest) approach is to make the user specify the
+dependency when he makes a change to sshd_config. Include something
+like the following in the service configuration file,
+
+```sh
+# Specify the network service that corresponds to the "bind" setting
+# in your configuration file. For example, if you bind to 127.0.0.1,
+# this should be set to "loopback" which provides the loopback interface.
+rc_need="loopback"
+```
+
+This is a sensible default for daemons that are happy with `0.0.0.0`,
+but lets the user specify something else, like `rc_need="net.wan"` if
+he needs it. The burden is on the user to determine the appropriate
+service whenever he changes the daemon's configuration file.

sh/.gitignore

@@ -6,6 +6,5 @@ cgroup-release-agent.sh
 init.sh
 init-early.sh
 rc-cgroup.sh
-tmpfiles.sh
 migrate-to-run.sh
 binfmt.sh

sh/Makefile

@@ -1,9 +1,9 @@
 DIR=	${LIBEXECDIR}/sh
 SRCS=	init.sh.in functions.sh.in gendepends.sh.in \
-	openrc-run.sh.in rc-functions.sh.in tmpfiles.sh.in ${SRCS-${OS}}
+	openrc-run.sh.in rc-functions.sh.in ${SRCS-${OS}}
 INC=	rc-mount.sh functions.sh rc-functions.sh runit.sh s6.sh \
 		start-stop-daemon.sh supervise-daemon.sh
-BIN=	gendepends.sh init.sh openrc-run.sh tmpfiles.sh ${BIN-${OS}}
+BIN=	gendepends.sh init.sh openrc-run.sh ${BIN-${OS}}
 
 INSTALLAFTER=	_installafter
 

sh/gendepends.sh.in

@@ -74,11 +74,22 @@ do
 
 		# Only generate dependencies for OpenRC scripts
 		read one two three <"$RC_SERVICE"
-		[ "$one" = "#!@SBINDIR@/runscript" ] || \
-		[ "$one" = "#!@SBINDIR@/openrc-run" ] || \
-		[ "$one" = "#!" -a "$two" = "@SBINDIR@/runscript" ] || \
-		[ "$one" = "#!" -a "$two" = "@SBINDIR@/openrc-run" ] || \
-			continue
+		case "$one" in
+			\#*/openrc-run) ;;
+			\#*/runscript) ;;
+			\#!)
+				case "$two" in
+					*/openrc-run) ;;
+					*/runscript) ;;
+					*)
+						continue
+						;;
+				esac
+				;;
+			*)
+				continue
+				;;
+		esac
 		unset one two three
 
 		RC_SVCNAME=${RC_SERVICE##*/} ; export RC_SVCNAME