This commit removes the secondary mention of the -2/--stderr flag in the
start-stop-daemon man page. The flag's functionality was already
sufficiently described in an earlier section of the text.
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
This was originally introduced in 14625346c0 with
an example list (just one for rc_parallel) of options. Let's add in rc_interactive
as it's a pretty obvious thing one might want to override.
See https://forums.gentoo.org/viewtopic-p-8694588.html.
svc_exec waits until SIGCHLD comes in to close its input, but in
rc_parallel case the SIGCHLD might be unrelated.
Checking the proper pid is found in signal handler and only signaling
signal_pipe the status code directly avoids this problem.
restarting a service with --no-deps ran into a "hairy workaround", which
had a few problems discussed in [1]:
- it ignores --dry-run, really restarting the requested service
- if the service was stopped, the program is started but the service
status stays stopped. This makes long-lived services impossible to
(re)start again (pid already exists and running), and the service also
won't stop on shutdown.
The kludge had a long comment describing the following situation:
- openvpn needs net and dns
- net restarts dns
- dns needs net
If the restart in net handled deps, openrc would deadlock waiting for
net in dns' restart, as net won't be started until that is done.
Restarting with --nodeps works around the deadlock, but can display
errors without the kludge (note that the services did start properly
anyway, the problem is that the default service path tries to lock dns
twice from openvn's dep's start and net's start's restart):
---
alpine:~# rc-service openvn start
openvn | * Caching service dependencies ... [ ok ]
net |net starting
net |dns | * Call to flock failed: Resource temporarily unavailable
net |dns | * ERROR: dns stopped by something else
net |net started
dns |dns started
openvn |openvn started
alpine:~# rc-status | grep s[1-3]
net [ started ]
dns [ started ]
openvn [ started ]
---
Locking again in restart --nodep can fail in two patterns:
- openvpn's need dependency start was first, and the restart in net
failed (case above): we can just silence locking failures and exit quietly
with restart --no-deps, which is not worse than trying to restart while
another process hold the lock.
- the restart in net's start was first, and openvpn's need dependency
start failed: not much can be done here short of adding a new status
that a no-deps restart is in progress as in the comment, but this case
can actually just be solved by adjusting dependencies -- and it actually
has already been fixed: the current openvpn init script in alpine only
'use dns', so it will not try to start it, and that will start just
fine with openvpn -> net -> dns only each starting each other once
sequentially.
Another failure pattern is just starting dns directly: that will start
net, which will try to restart dns while we are starting it.
Silencing messages on restart also solves this.
Link: https://github.com/OpenRC/openrc/issues/224 [1]
according to the linux manpage, the "safe" variant may not be available
on all platform. however we bundle our own `queue.h` so this should not
be an issue.
`free` is not async-signal-safe and calling it inside a signal handler
can have bad effects, as reported in the musl ML:
https://www.openwall.com/lists/musl/2023/01/23/1
the solution:
- keep track of weather remove_pid() is being called from inside a
signal handler or not.
- if it's inside a signal handler then DO NOT call free - instead put
that pointer into a "to be freed later" list.
- if it's not inside a signal handler then take the "to be freed later"
list and free anything in it.
Bug: https://github.com/OpenRC/openrc/issues/589
Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com>
problem:
* vfork has been removed from POSIX [0].
* clang-tidy flags the `strerror` and `eerror` call inside the vfork-ed
child as undefined behavior.
solution: use posix_spawnp, which is serves similar purpose and is
specified in posix. and as an added bonus, it's also easier to use and
less lines of code.
[0]: https://www.man7.org/linux/man-pages/man2/vfork.2.html#CONFORMING_TO
`seed_dir` gets allocated via xstrdup but never gets freed - which
clang-tidy flags as a memory leak.
instead of free-ing the allocation, just don't allocate to begin with
since there's no need for it.
also bump the copyright year.
this was reported by codeql's scan as a TOCTOU bug. while that's true in
theory, i don't believe it would've had any practical effect.
a better justification for this change might be the fact that it
upgrades from `utime` (which is depreciated by POSIX [0]) to `futimens`.
[0]: https://www.man7.org/linux/man-pages/man3/utime.3p.html#FUTURE_DIRECTIONS
malloc (called by xasprintf) is not async-signal-safe. beside, the
string here is constant, so there's no need to malloc it all.
eerrorx isn't async-signal-safe either (due to calling fprintf and exit)
but consequence of them are _typically_ not as grave as calling malloc
while it's internal state is inconsistent.
Bug: https://github.com/OpenRC/openrc/issues/589
From scan-build w/ clang-16.0.0_pre20230107:
```
../src/librc/librc.c:759:14: warning: Potential leak of memory pointed to by 'init' [unix.Malloc]
return false;
^~~~~
```
It's already initialised to false at the start and it's clear when reading
what the flow is.
While at it, fix some indentation and adjust whitespace to make more readable.
These become fine with C23 because () starts to mean (void) then, but for
previous language versions, it's deprecated, and it causes an annoying
warning when building with Clang by default.
Plus, GCC lacks specific flags to trigger what C23 *does* ban, so a lot
of people are going around building with -Wstrict-prototypes, so let's
just fix this to be consistent with the rest of the codebase anyway
to fend off false positive reports.
On systems with a very large RLIMIT_NOFILE, calling close() in a loop
from 3 to getdtablesize() effects an enormous number of system calls.
There are better alternatives. Both BSD and Linux have the closefrom()
system call that closes all file descriptors with indices not less than
a specified minimum. Have start-stop-daemon call closefrom() on systems
where it's implemented, falling back to the old loop elsewhere.
Likewise, calling fcntl(i, F_SETFD, FD_CLOEXEC) in a loop from 3 to
getdtablesize() raises a similar performance concern. Linux 5.11 and
onward has a close_range() system call with a CLOSE_RANGE_CLOEXEC flag
that sets the FD_CLOEXEC flag on all file descriptors in a specified
range. Have supervise-daemon utilize this feature on systems where it's
implemented, falling back to the old loop elsewhere.
1364e6631c exempted the write end of the
synchronization pipe from the close() loop in the child process, but
this is unnecessary, as the pipe is opened with O_CLOEXEC, and the child
process calls execvp() soon after the close() loop, with the intervening
code not needing the pipe. Indeed, the pipe only needs to remain open in
the child process until after the call to setsid(), which occurs well
before the close() loop. So, eliminate the needless carve-out from the
close() loop, in preparation for introducing closefrom().
dirfd is uninitialized at this point, and even if it were, it doesn't
make sense to use since the path is "/" -- the dirfd is ignored when
the path is absolute. Switch to AT_FDCWD to avoid all that.
The default behavior of check: false is going to change to true in the
future, see <https://github.com/mesonbuild/meson/issues/9300>.
Thus we are explicit about the desired behavior. The error in uname is
important but with test we check ourselves using returncode().
This fixes#556.
If supervise_daemon_args is not set *or empty*, it defaults to
`start_stop_daemon_args`. This is bad because supervise-daemon doesn't
accept the same options as `start-stop-daemon`. So if we set e.g.
`start_stop_daemon_args="--wait 50"`, but not `supervise_daemon_args`,
and the user adds `supervisor=supervise-daemon` to the corresponding
/etc/conf.d/<service> file, the service will fail to start due to
unrecognized option "wait".
It would be best to remove this fallback, but that might break some
existing scripts that depend on it. So this commit just changes it to
use `start_stop_daemon_args` as the default for `supervise_daemon_args`
only if `supervise_daemon_args` is not set at all, but not if it's
empty.
This at least simplifies workarounds; we can just add
`supervise_daemon_args="$supervise_daemon_args"` to init scripts.
This fixes#558.
Despite this being a 'deptree', it's actually
xmalloc'd in the same function (rc_deptree_update),
and so should be free'd, not rc_deptree_free'd,
as rc_deptree_load* wasn't used to allocate it.
```
[71/213] Compiling C object src/librc/librc.so.1.p/librc-depend.c.o
../src/librc/librc-depend.c: In function ‘rc_deptree_update’:
../src/librc/librc-depend.c:1077:9: warning: ‘rc_deptree_free’ called on pointer returned from a mismatched allocation function [-Wmismatched-dealloc]
1077 | rc_deptree_free(deptree);
| ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../src/shared/misc.h:29,
from ../src/librc/librc.h:57,
from ../src/librc/librc-depend.c:21:
In function ‘xmalloc’,
inlined from ‘rc_deptree_update’ at ../src/librc/librc-depend.c:775:12:
../src/shared/helpers.h:64:23: note: returned from ‘malloc’
64 | void *value = malloc(size);
| ^~~~~~~~~~~~
```
This fixes#563.
Starting with grep version 3.8, the hwclock init script logs warnings
about stray backslashes:
> hwclock | * Setting system clock using the hardware clock [UTC] ...
> hwclock |grep: warning: stray \ before -
> hwclock |grep: warning: stray \ before -
This is caused by the check for existence of the `--noadjfile` argument
in function `get_noadjfile()`.
Replacing the affected logic with an explicit argument denoting the
pattern as such resolves the issue.
Fixes#548
As described in "Why nice levels are a placebo and have been for a very
long time, and no one seems to have noticed"[1], the Linux kernel in its
default configuration on many Linux distributions autogroups tasks by
session ID and "fairly" allocates CPU time among such autogroups. The
nice levels of tasks within each autogroup are only relative to
other tasks within the same autogroup. Effectively, this means that the
traditional nice level is rendered moot for tools like start-stop-daemon
and supervise-daemon, which start each daemon in its own session and
thus in its own autogroup. Linux does provide a means to change the
niceness of autogroups relative to each other, so let's have start-stop-
daemon and supervise-daemon make use of this feature where available so
that -N,--nicelevel/SSD_NICELEVEL will actually do what the user
intends. On systems where autogroups are not supported or are disabled,
this commit introduces no change in behavior.
Note that the setsid() call in the child process of start-stop-daemon is
moved to much earlier. This is necessary so that the new process will be
assigned to a new autogroup before the autogroup nicelevel is set. To
avoid inadvertently acquiring /dev/tty as the controlling terminal of
the new session after setsid() has given up the controlling terminal
inherited from the parent process, tty_fd is opened before the call to
setsid().
[1] https://www.reddit.com/r/linux/comments/d7hx2c/why_nice_levels_are_a_placebo_and_have_been_for_a/
This fixes#542.
While refactoring the changes proposed in #533 a minor error was
introduced were the root service will now attempt to remount swap.
This will fail with the error message `mountinfo: 'swap' is not a
mountpoint`.
This fixes#546
Without this commit, the root OpenRC service remounts all mounted
filesystems (except /) with the options defined in /etc/fstab via
fstabinfo. It is presently unclear to me why / was excluded from
remounting in 497ff7ee41 and unfortunately
neither the commit nor the associated Bugzilla issue [1] provides
further information on this.
At Alpine, our initramfs does currently not remount / with all options
defined in /etc/fstab [2]. As part of the discussion on the Alpine side
of things we wondered why OpenRC does not remount / since this would be
the easier solution for us. For this reason, this commit changes the
behavior of the OpenRC root services accordingly to also remount / with
the options defined in /etc/fstab.
[1]: https://bugs.gentoo.org/401573
[2]: https://gitlab.alpinelinux.org/alpine/mkinitfs/-/merge_requests/103
This fixes#533.
While running `rc-service start docker` on Gentoo,
I found that the command does not start the service 90% of the time,
with an enigmatic 'service crashed' message.
The root cause of this is apparently rc-service spawning a pty,
running start-stop-daemon inside that pty, and exitting,
before start-stop-daemon child process calls setsid(),
which results in the child process being killed with SIGHUP (SI_KERNEL).
Theoretically this bug was present ever since the file was created in
5af58b4514 ("Rewrite the core parts in C. We now provide...")
(or even before that), but it should have been only a minor issue before
45bd125dcc ("Use a pty for prefixed output instead of pipes for...").
Not sure why nobody has had the issue so far (it has been present for
almost 15 years).
As here setsid() is the last call before execve(), the most natural
locking mechanism is vfork(), as it gives back control to parent
process only after execve() or process termination.
So this way the bug can be fixed by adding a single letter. :-)
Another way to ensure this would be using an O_CLOEXEC file descriptor
or some custom lock, which would need to be released not before setsid().
Fixes: 5af58b4514 ("Rewrite the core parts in C. We now provide...")
Fixes#532.
The two lines seem to both belong to --override, but made into seperate
array elements accidentally, making options after --override and their
help mismatch. This fixes it.
previously broken in 6034866d1c
caused *_logger options to be passed unquoted, so
`error_logger="logger -t .."` would pass -t to s-s-d and fail to start
the service.
Fixes: #531
- use _ throw-away variable to get rid of a shellcheck warning
- remove tests for /etc/hostname and just try to read it
- drop reference to bash HOSTNAME variable.
- make source of host name more accurate
X-Gentoo-Bug: 850577
X-Gentoo-Bug-URL: https://bugs.gentoo.org/850577
```
=================================================================
==22862==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 4096 byte(s) in 1 object(s) allocated from:
#0 0x7f1fd5b12cb7 in __interceptor_malloc /usr/src/debug/sys-devel/gcc-11.2.1_p20220312/gcc-11-20220312/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55556abecea7 in xmalloc ../src/includes/helpers.h:64
#2 0x55556abecea7 in xasprintf ../src/includes/helpers.h:149
#3 0x55556abeb6fb in do_check ../src/rc/checkpath.c:206
#4 0x55556abeb6fb in main ../src/rc/checkpath.c:443
#5 0x7f1fd58576cf in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 4096 byte(s) leaked in 1 allocation(s).
```
Signed-off-by: Sam James <sam@gentoo.org>
```
Direct leak of 4 byte(s) in 1 object(s) allocated from:
#0 0x7f49539534a7 in __interceptor_strdup /usr/src/debug/sys-devel/gcc-11.2.1_p20220312/gcc-11-20220312/libsanitizer/asan/asan_interceptors.cpp:454
#1 0x55d76fa66867 in xstrdup ../src/includes/helpers.h:91
#2 0x55d76fa66867 in get_dirfd ../src/rc/checkpath.c:111
#3 0x55d76fa66867 in do_check ../src/rc/checkpath.c:206
#4 0x55d76fa66867 in main ../src/rc/checkpath.c:442
#5 0x7f49536f06cf in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
```
Signed-off-by: Sam James <sam@gentoo.org>
(This is analogous to the rc_stringlist change.)
This gives a hint to the compiler that allocations (return values)
from this function should be paired with a corresponding dealloc/free
function.
Signed-off-by: Sam James <sam@gentoo.org>
This gives a hint to the compiler that allocations (return values)
from this function should be paired with a corresponding dealloc/free
function
In this case, it means that every rc_stringlist that rc_stringlist_new()
returns should eventually be freed by calling rc_stringlist_free(ptr)
where ptr is the relevant rc_stringlist.
We have to add a test for this into the build system
because only GCC supports this for now. In future, we might
be able to use meson's has_function_attribute (it does support
'malloc', just not AFAICT 'malloc with arguments').
Signed-off-by: Sam James <sam@gentoo.org>
'services' is still referenced by the list
which gets returned. We can't free it.
Thanks to GCC 11's -fanalyzer.
Signed-off-by: Sam James <sam@gentoo.org>
Seen on running rc-status.
```
=================================================================
==14636==ERROR: LeakSanitizer: detected memory leaks
Indirect leak of 72 byte(s) in 3 object(s) allocated from:
#0 0x7f443412dcb7 in __interceptor_malloc /usr/src/debug/sys-devel/gcc-11.2.1_p20220312/gcc-11-20220312/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x7f443400c727 in xmalloc ../src/includes/helpers.h:64
#2 0x7f443400d1f4 in rc_stringlist_add ../src/librc/librc-stringlist.c:32
#3 0x7f4433fecc34 in get_runlevel_chain ../src/librc/librc.c:390
#4 0x7f4433fedc00 in rc_runlevel_stacks ../src/librc/librc.c:519
#5 0x7f4433ff1d8e in rc_services_in_runlevel_stacked ../src/librc/librc.c:976
#6 0x55be0e8f9517 in main ../src/rc/rc-status.c:407
#7 0x7f44334736cf in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
```
Signed-off-by: Sam James <sam@gentoo.org>
The value of ${seed_dir} may have spaces in it, making the current
argument string building method unsafe. Instead, use positional
parameters to pass these arguments safely.
There have been a number of subtle improvements and cleanups to seedrng,
including using openat and locking the directory fd instead of a
separate lock file. Also various stylistic cleanups.
This fixes#519.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* rewrite tests to work with meson
This ports our tests to meson and makes them able to be run in parallel.
* add tests to ci
* rewrite test/check-trailing-newlines in bash
This test was using a GNU sed command which does not work on Alpine Linux.
- drop old build system
- move shared include and source files to common directory
- drop "rc-" prefix from shared include and source files
- move executable-specific code to individual directories under src
- adjust top-level .gitignore file for new build system
This closes#489.
The RNG can't actually be seeded from a shell script, due to the
reliance on ioctls. For this reason, the seedrng project provides a
basic script meant to be copy and pasted into projects like OpenRC and
tweaked as needed: https://git.zx2c4.com/seedrng/about/
This commit imports it into OpenRC and wires up /etc/init.d/urandom to
call it. It shouldn't be called by other things on the system, so it
lives in rc_sbindir.
Closes#506.
Closes#507.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This add No New Privs flag for start-stop-daemon and supervise-daemon
by adding --no-new-privs flag. As a result, the user set the No New
Privs flag for the program should run with.
see PR_SET_NO_NEW_PRIVS prctl(2)
This adds securebits flags for start-stop-daemon and supervise-daemon
by adding --secbits option. As a result, the user can specify
securebits the program should run with. see capabilities(7)
During boot if the "previous_dmesg" setting is enabled in
/etc/conf.d/bootmisc then during the 1st boot of a machine the
bootmisc init.d script will attempt to move a nonexistant dmesg
file, so generating an error on the console.
Modify the script to only move an existing file.
This is a partial revert of commit 8e02406d ("rc-misc.c: remove
references to PATH_MAX"), which changed 'file' to a null pointer with no
associated storage.
../openrc-0.44.10/src/rc/rc-misc.c: In function ‘_rc_deptree_load’:
../openrc-0.44.10/src/rc/rc-misc.c:392:33: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
392 | eerror("Clock skew detected with `%s'", file);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 8e02406d ("rc-misc.c: remove references to PATH_MAX")
Closes: #493
This adds capabilities for start-stop-daemon by adding --capabilities
option. As a result, the user can specify the inheritable, ambient and
bounding set by define capabilities in the service script.
This fixes#314.
This commit adds a new --oom-score-adj option to start-stop-daemon and
supervise-daemon, as well as an equivalent SSD_OOM_SCORE_ADJ environment
variable. If either of these are specified (with the command-line
option taking precedence), then the specified adjustment value is
written to /proc/self/oom_score_adj after forking but prior to exec'ing
the daemon (at the time when nice and ionice are applied).
Additionally, per a suggestion by Mike Frysinger, the suggested values
for the SSD_NICELEVEL, SSD_IONICELEVEL, and SSD_OOM_SCORE_ADJ variables
in the example config file are now given as zeros, which are the
kernel's default values of these process knobs for the init process at
boot. Note that uncommenting any of these zero-valued suggestions will
cause SSD/SD to set the corresponding process knob affirmatively to
zero, whereas leaving the variable unset (and the equivalent command-
line option unspecified) means SSD/SD will not change the corresponding
process knob from its inherited value.
See: https://github.com/OpenRC/openrc/pull/435#discussion_r688310672
This fixes#435.
Newer gcc reports:
broadcast.c: In function 'broadcast':
broadcast.c:132:15: warning: variable 'tp' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
132 | FILE *tp;
Move the storage off the stack to avoid. This makes the function
not safe for multithread use, but we don't do that anywhere, so
who cares!
This allows containers using OpenRC based services to be configured to
allow open tcp connections to be closed before they are shut down.
This fixes#476.
Much like PAM, not all implementations of libcrypt provide a pkg-config
file, and hence we can't find it using the old logic.
Let's fall back to the standard AC_SEARCH_LIBS-style check if the pkg-config-style
detection fails.
This fixes finding e.g. musl's libcrypt.
X-Gentoo-Bug: 827074
X-Gentoo-Bug-URL: https://bugs.gentoo.org/827074
We only need libcrypt if we're building _with_ SELinux and
_without_ PAM. We don't use libcrypt for general SELinux
with PAM.
This is mostly a correctness change as libcrypt should
generally be available (as opposed to the previous
change which fixed some real-world cases).
Fixes: f3f0fde861Fixes: #478
Clang was failing with:
```
/zroot/jenkins/workspace/update_ghsotbsd-13_poudriere_jail/sbin/openrc/../../contrib/openrc/src/rc/rc.c:70:2: error: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Werror,-Wstring-concatenation]
"when leaving single user or boot runlevels",
^
/zroot/jenkins/workspace/update_ghsotbsd-13_poudriere_jail/sbin/openrc/../../contrib/openrc/src/rc/rc.c:69:2: note: place parentheses around the string literal to silence warning
"override the next runlevel to change into\n"
^
```
This fixes#469.
While the s6-svscan runscript belongs to OpenRC, the user is required to
install s6 before it can actually be used, potentially leading to
confusion. Check for the existence of $command in start_pre and, if it does not
exist, bail out with an error that makes this observation.
X-Gentoo-Bug: 816978
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=816978
This github action runs a build on each of the following platforms on a
push or pull request.
- Ubuntu LTS with gcc and glibc
- Ubuntu LTS with clang and glibc
- Alpine with gcc and musl
This fixes#463.
strlen's return value isn't enough to be used
directly for (x)malloc; it doesn't include
the null byte at the end of the string.
X-Gentoo-Bug: 816900
X-Gentoo-Bug-URL: https://bugs.gentoo.org/816900Fixes: #459Fixes: #462
Currently, we run sv start immediately after linking the service.
The runsv process may not be up at the moment, as a result of which
openrc will mark the service as stopped, even though it may be brought up
by runit at the next scan.
This is documented in the gentoo wiki:
https://wiki.gentoo.org/wiki/Runit#OpenRC.27s_runit_integration_feature
This PR adds a timeout so that correct process state can be reported.
Before:
* Starting netdata-runit ...
fail: /run/openrc/sv/netdata: runsv not running
* Failed to start netdata-runit
After:
* Starting netdata-runit ...
fail: /run/openrc/sv/netdata: runsv not running
ok: run: /run/openrc/sv/netdata: (pid 9042) 0s
This fixes#253.
Fix the following error:
broadcast.c:41:21: error: '__UT_LINESIZE' undeclared (first use in this function); did you mean 'UT_LINESIZE'?
#define UT_LINESIZE __UT_LINESIZE
^~~~~~~~~~
Constant UT_LINESIZE is defined in <utmp.h> provided by musl.
Busybox timeout does not support the `-k` flag. As such, invoking fuser
from do_unmount never worked without this patch. This went unnoticed as
standard error is redirected to /dev/null. This patch fixes this by
simply removing the incompatible `-k` flag.
[Ariadne: the `-k` is redundant anyway, since we are sending the KILL
signal to begin with.]
Since musl 1.2 time_t is a 64 bit value, even on 32 bit systems. A
hotfix for printing the value is simply using PRIu64 from inttypes.h
in the format string.
This fixes#446.
supervise-daemon was apparently overlooked when support for the
SSD_IONICELEVEL environment variable was added. This commit brings
supervise-daemon up to parity with start-stop-daemon with respect to
this environment variable.
Newer devices have multiple power_supply devices in sysfs:
$ grep ^ /sys/class/power_supply/*/type
/sys/class/power_supply/AC/type:Mains
/sys/class/power_supply/BAT0/type:Battery
/sys/class/power_supply/ucsi-source-psy-USBC000:001/type:USB
/sys/class/power_supply/ucsi-source-psy-USBC000:002/type:USB
There are two "USB" Type-C ports than can supply power and both are
aggregated into the "Mains" power supply by the firmware. The "Battery"
also counts as a power supply, but is missing the online attribute.
The -f check with a wildcard pattern results in an error, when multiple
devices are present:
/lib/rc/bin/on_ac_power: line 21: [: too many arguments
When the power_supply class is registered, check for a "Mains" device.
Fixes#427.
Since commit 6b475ab269, openrc tries to load
modules twice which have been defined in /etc/conf.d/modules via modules=
variable when /bin/sh points to dash shell.
The reason is that when the "modules-load" service was merged into "modules"
service, the "modules" variable name got used in both, load_modules()
function and in Linux_modules() function which both get called when modules
service is started. Although "modules" variable is marked as local in
load_modules(), dash simply ignores this.
Avoid the issue by renaming "modules" variable to "_modules" in
load_modules() function.
This fixes#419.
In legacy cgroups mode, we were running `mountinfo -q ""` which was
generating an error message. If we return immediately when
cgroup2_find_path returns an empty value, we avoid this message.
The previous fix excludes PIDs of processes running in a different namespace
regardless of whether the PID has been explicitly stored in a PID file mentioned
in the --pidfile parameter. The correct behavior is to only exclude the pid if
it is not stored in a pidfile.
X-Gentoo-Bug: 776010
X-Gentoo-Bug-URL: https://bugs.gentoo.org/776010
The cgroups v2 setup required the rc_cgroups_controllers variable
to be set to the list of controllers to enable regardless of whether the
mode was hybrid or unified.
This makes sense for hybrid mode since the controllers can't be in both
the cgroups v1 and v2 hierarchies, but for unified mode we should enable
all controllers that are configured in the kernel.
The test `[ -h "${ifname}" ] && continue` skips the symlinks while it is
the opposite that is the expected: ignoring files that are not symlinks.
Fixes commit f42ec82f21.
This fixes#391.
Otherwise this would create the following output:
rc-status -f ini
* Caching service dependencies ... [ ok ]
[default]
dbus = started
NetworkManager = started
syslog-ng = started
...
This fixes#364.
I found the original note a little confusing, since using rc-update will
add it to a runlevel so it *is* auto-started when the system reaches
that runlevel again, but I don't think that was the intended meaning of
'auto-start', so hopefully this makes it a little more clear.
Currently when osclock is enabled as a init.d service the following
messages appear during boot when osclock starts:
* The command variable is undefined.
* There is nothing for osclock to start.
* If this is what you intend, please write a start function.
* This will become a failure in a future release.
osclock is activated whenever a machine's system clock is automatically
configured from a RTC by the kernel and the osclock's only purpose is to
satisfy the "clock" dependency defined by other init.d services.
Adding a stub start() function prevents OpenRC from showing warnings but
continues to ensure that the osclock service still does not actually do
anything.
This fixes#377.
The do_check() function recently gained some defenses against symlink
replacement attacks that involve the use of *at functions in place of
their vanilla counterparts; openat() instead of open(), for example.
One opportunity to replace mkdir() with mkdirat() was missed, however,
and this commit replaces it.
This fixes#386.
start-stop-daemon and supervise-daemon parse usernames and group names
passed via the --user argument as numeric UID/GID if they start with a
number (e.g. user "4foo" will be treated as UID 4). This results in the
process that is being started to run under a totally unexpected user if
that UID exists.
Even though the result of the sscanf calls are tested for a result of
exactly 1, which means exactly one value was extracted, because sscanf's
format string only contains only one placeholder, it will never return
a value greater than 1, even if there are still characters left to be
parsed. This causes start-stop-daemon and supervise-daemon to assume
that usernames starting with a number are just that number. Adding a
second placeholder "%1s" to the format string, which matches a string of
length 1, makes sure that sscanf can distinguish between pure numbers
(in which case it will return 1) and strings either starting with a
number (in which case it will return 2) and any other string (in which
case it will return 0).
This fixes#379.
This fixes#380.
Starting program: /sbin/start-stop-daemon --start --exec i-dont-exist
Program received signal SIGSEGV, Segmentation fault.
0x0000555555559053 in main (argc=1, argv=0x7fffffffdc20)
at start-stop-daemon.c:631
631 *exec_file ? exec_file : exec);
This fixes#385.
This walks the directory path to the file we are going to manipulate to make
sure that when we create the file and change the ownership and permissions
we are working on the same file.
Also, all non-terminal symbolic links must be owned by root. This will
keep a non-root user from making a symbolic link as described in the
bug. If root creates the symbolic link, it is assumed to be trusted.
On non-linux platforms, we no longer follow non-terminal symbolic links
by default. If you need to do that, add the -s option on the checkpath
command line, but keep in mind that this is not secure.
This fixes#201.
When executable is provided just by name (and therefore searched in a
path), exec_file is reset to NULL every time. exists() handles it being
NULL just fine, but dereferencing it in eerror does not work.
Fixes#326Fixes#327
It looks like some stray text was left at the bottom of the file:
```
package.
migrating your system to openrc-init.
```
There's a subsection on migrating a system to `openrc-ini`; perhaps this was
an embryonic section title?
This fixes#347.
prior to cgroups getting mounted, /sys/fs/cgroup will still exist,
but attempts to make directories in it will fail, change cgroup2_set_limits() to
verify that cgroups are mounted instead of just checking that /sys/fs/cgroup
exists.
This fixes#307.
This fixes#321.
This allows openrc to direct sysvinit to shut down the system by setting
the INIT_HALT environment variable appropriately. Also, we do not try to
communicate with sysvinit if its fifo does not exist.
I am removing this on the advice of a member of the Gentoo toolchain
team. It was explained to me that this doesn't offer any significant
benefits to OpenRC.
If anyone ffeels differently, please open a pull request reverting
this and adding an explanation of what it does and how to know which
functions to mark hidden in the future.
This fixes#301.
The do_openrc() function was not waiting properly for the child process
which started the runlevel to return. We need to repeatedly call
waitpid() until its return value matches the pid of the child process or
the child process does not exist.
This fixes#216.
This fixes#300.
The 'readelf'-based tests cover a few situations:
1. undefined symbols in shared libraries
2. unexpected exports in shared libraries
Bug #575958 shows that [2.] implementation is too simplistic
in assuming that presence of relocation equals to export presence.
It is incorrect for PLT stubs and local symbols.
Let's just drop these tests.
If one needs to cover [1.] it is better to use LDFLAGS=-Wl,--no-undefined.
This closes#292.
X-Reported-by: Benda Xu
X-Gentoo-Bug: https://bugs.gentoo.org/575958
X-Gentoo-Bug-URL: https://bugs.gentoo.org/575958
The -f option can be used when showing the status of services in
runlevels to allow making the output more easily parsable.
Currently, the .ini format is the only one supported.
The .Dt header is supposed to be all caps. This was mixing case.
The options block was being incorrectly indented due to a missing .El.
Some of the new options were missing the .It block, so add that.
Finally, the -D option was missing capitalization.
readlink(3) does not nul-terminate the result it sticks
into the supplied buffer. Consequently, the code
rc = readlink(path, buf, sizeof(buf));
does not necessarily produce a C string.
The code in rc_find_pid() produces some C strings this way
and passes them to strlen() and strcmp(), which can lead
to an out-of-bounds read.
In this case, since the code already takes care to
zero-initialize the buffers before passing them
to readlink(3), only allow sizeof(buf)-1 bytes to
be returned.
(While fixing this issue, I fixed two other locations that
used the same problematic pattern.)
This fixes#270.
The contents of /proc/<pid>/cmdline are read into
a stack buffer using
bytes = read(fd, buffer, sizeof(buffer));
followed by appending a null terminator to the buffer with
buffer[bytes] = '\0';
If bytes == sizeof(buffer), then this write is out-of-bounds.
Refactor the code to use rc_getfile instead, since PATH_MAX
is not the maximum size of /proc/<pid>/cmdline. (I hit this
issue in practice while compiling Linux; it tripped the
stack-smashing protector.)
This is roughly the same buffer overflow condition
that was fixed by commit 0ddee9b7d2
This fixes#269.
The following will cause a segfault due to NULL being
passed to strcmp(3)
$ RC_SVCNAME=foo supervise-daemon
Fix the bounds check on argc in main. If argc<=1, then
it is not safe to dereference argv[1].
The statement
ll = strlen(applet);
appears twice in the same block without any
intervening assignment to the variables
'll' or 'applet'
Remove the second (duplicate) statement.
We have used /run for some time now and we have had this migration
script for 6 years. Linux users should have upgraded by now to a version
of OpenRC which stores its information in /run.
In order to run healthcheck() and the unhealthy() function, add an
exec_command call to the supervisor.
Another difference is This function also logs errors instead of
attempting to display them.
This is for #271.
I do not know of a need to have the default shell be a build-time
configurable setting. All *nix systems I am aware of have /bin/sh as a
default posix compatible shell.
If some systems running OpenRC do not make that assumption about
/bin/sh, I will consider bringing this back, so feel free to open an
issue.
Without a respawn period setting, the supervisor will give up on
respawning agetty after it is respawned respawn_max times. For most
daemons giving up like this is reasonable, but not for agettys. Agettys
should always be respawned unless they are respawning too fafst,.
If an agetty is respawning faster than 10 times in 60 seconds, this
seems to be too fast.
# This file is part of OpenRC. It is subject to the license terms in
# the LICENSE file found in the top-level directory of this
# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
# distribution and at https://github.com/OpenRC/openrc/blob/HEAD/LICENSE
# This file may not be copied, modified, propagated, or distributed
# except according to the terms contained in the LICENSE file.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
