tmpfilesd: Doing both create+remove at the same time is valid.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>

.cirrus.yml

@@ -1,15 +0,0 @@
-# Cirrus CI integration
-# https://cirrus-ci.org
-
-test_task:
-  freebsd_instance:
-    matrix:
-      image: freebsd-12-0-release-amd64
-      image: freebsd-11-2-release-amd64
-  env:
-    OS: FreeBSD
-  procfs_script: >
-    [ -f /proc/curproc ] || mount -t procfs proc /proc
-  pkg_install_script: pkg install -y bash gawk gmake gsed
-  gsed_hack_script: rm /usr/bin/sed && ln -s /usr/local/bin/gsed /usr/bin/sed
-  test_script: bash ci/cirrus.sh

.gitignore

@@ -1,4 +1,4 @@
-*.gz
+*.bz2
 
 *.diff
 *.patch

.travis.yml

@@ -1,28 +0,0 @@
-# Travis build integration.
-# https://docs.travis-ci.com/
-
-language: c
-
-os:
-  - linux
-
-compiler:
-  - gcc
-  - clang
-  - musl-gcc
-
-addons:
-  apt:
-    packages:
-    - musl-tools
-
-notifications:
-  irc:
-    channels:
-      - "irc.freenode.org#openrc"
-    on_success: change  # options: [always|never|change] default: always
-    on_failure: always  # options: [always|never|change] default: always
-    on_start: false     # default: false
-
-script:
-  - ./ci/travis.sh

AUTHORS

@@ -1,100 +0,0 @@
-Alessio Ababilov <ilovedevlinux@gmail.com>
-Alexander Berntsen <alexander@plaimi.net>
-Alexander Mezin <mezin.alexander@gmail.com>
-Alexander Tsoy <alexander@tsoy.me>
-Alexander Vershilov <alexander.vershilov@gmail.com>
-Alexander Vershilov <qnikst@gentoo.org>
-Alexander V Vershilov <qnikst@gentoo.org>
-Alexey Shvetsov <alexxy@gentoo.org>
-Alon Bar-Lev <alon.barlev@gmail.com>
-Amadeusz Żołnowski <aidecoe@aidecoe.name>
-Andrew Gregory <andrew.gregory.8@gmail.com>
-Anthony Donnelly <Amzo@archbsd.com>
-Anthony G. Basile <basile@opensource.dyc.edu>
-Anthony G. Basile <blueness@gentoo.org>
-Austin S. Hemmelgarn <ahferroin7@gmail.com>
-Benda Xu <heroxbd@gentoo.org>
-Björn Baumbach <bb@sernet.de>
-Charlie <root@uberlaptop.development.ltl>
-Chris Richards <gizmo@giz-works.com>
-Christian <christian@ch-sc.de>
-Christian Ruppert <idl0r@gentoo.org>
-Christian Wetzig <gentoo@wetzig.de>
-Christopher Head <chead@telus.net>
-Consus <consus@gmx.com>
-Daniel Mierswa <impulze@impulze.org>
-Daniel Robbins <drobbins@funtoo.org>
-Diego Elio Pettenò <flameeyes@flameeyes.eu>
-Diego Elio Pettenò <flameeyes@gmail.com>
-Diego <flameeyes@gentoo.org>
-Dirk Sondermann <ds-gentoo@dyximaq.de>
-Doug Freed <dwfreed@mtu.edu>
-Doug Goldstein <cardoe@cardoe.com>
-Ed Wildgoose <gentoo@wildgooses.com>
-Eray Aslan <eras@gentoo.org>
-Eugeny Shkrigunov <eshkrig@gmail.com>
-Fedja Beader <specing@contact.me.on.irc.freenode.net>
-Flex <frostynova@gmail.com>
-Gabriele Giacone <1o5g4r8o@gmail.com>
-Gary <admin@garyshood.com>
-Gilles Oivier <g.olivier@wanadoo.fr>
-Hank Leininger <hlein@korelogic.com>
-Ian Stakenvicius <axs@gentoo.org>
-Jakob Drexel <jake42@rommel.stw.uni-erlangen.de>
-James Le Cuirot <chewi@aura-online.co.uk>
-Jan Psota <jasiu@belsznica.pl>
-Jason Zaman <jason@perfinion.com>
-Joe Harvell <jharvell@dogpad.net>
-Joe M <joe9mail@gmail.com>
-Johan Bergström <bugs@bergstroem.nu>
-Jory A. Pratt <anarchy@gentoo.org>
-Juan RP <xtraeme@gmail.com>
-Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
-Kfir Lavi <lavi.kfir@gmail.com>
-Kirill Elagin <kirelagin@gmail.com>
-Lars Wendler <polynomial-c@gentoo.org>
-Lorand Kelemen <lorand.kelemen@indgroup.eu>
-Marc Joliet <marcec@gmx.de>
-Marien Zwart <marienz@gentoo.org>
-Michal Gorny <gentoo@mgorny.alt.pl>
-Mihai Moldovan <ionic@ionic.de>
-Mike Frysinger <vapier@gentoo.org>
-Mike Gilbert <floppym@gentoo.org>
-Nao Nakashima <nao.nakashima@gmail.com>
-Natanael Copa <natanael.copa@gmail.com>
-Nathan Phillip Brink <ohnobinki@ohnopublishing.net>
-Ned Ludd <solar@gentoo.org>
-Olivier Huber <oli.huber@gmail.com>
-Patrick Lauer <patrick@gentoo.org>
-Petre Rodan <petre.rodan@simplex.ro>
-Piotr Karbowski <piotr.karbowski@gmail.com>
-Ralph Sennhauser <sera@gentoo.org>
-Richard Yao <ryao@cs.stonybrook.edu>
-Rick Farina (ZeroChaos) <sidhayn@gmail.com>
-Rick Farina (Zero_Chaos) <zerochaos@gentoo.org>
-Robin H. Johnson <robbat2@gentoo.org>
-Robin H. Johnson <robbat2@orbis-terrarum.net>
-Robin Johnson <robbat2@gentoo.org>
-Roy Marples <roy@marples.name>
-Salah Coronya <salah.coronya@gmail.com>
-Sebastian Thorarensen <indigo176@blinkenshell.org>
-Semen Maryasin <marsoft@ya.ru>
-Sergei Trofimovich <slyfox@gentoo.org>
-Seth Robertson <in-gentoo@baka.org>
-S. Gilles <sgilles@umd.edu>
-Sony Interactive Entertainment, llc.
-Stefan Knoblich <s.knoblich@axsentis.de>
-Stef Simoens <stef.simoens@scarlet.be>
-Steve L <slong@rathaus.eclipse.co.uk>
-Steven Chamberlain <steven@pyro.eu.org>
-Svante Signell <svante.signell@gmail.com>
-Sven Vermeulen <sven.vermeulen@siphos.be>
-Thomas D <whissi@whissi.de>
-Thomas Pfaff <tpfaff@gmx.net>
-Trevor Summers Smith <trevorsummerssmith@gmail.com>
-Walter <walter@pratyeka.org>
-William Hubbs <w.d.hubbs@gmail.com>
-William Hubbs <williamh@gentoo.org>
-Will Miles <wmiles@sgl.com>
-Yun Zheng Hu <hu@fox-it.com>
-Yuta SATOH <nigoro.gentoo@0x100.com>

BUSYBOX.md

@@ -1,30 +0,0 @@
-Using Busybox as your Default Shell with OpenRC
-===============================================
-
-If you have/bin/sh linked to busybox, you need to be aware of several
-incompatibilities between busybox's applets and the standalone
-counterparts. Since it is possible to configure busybox to not include
-these applets or to prefer the standalone counterparts, OpenRC does not
-attempt to support the busybox applets.
-
-For now, it is recommended that you disable the following busybox
-configuration settings for best results with OpenRC.
-
-CONFIG_START_STOP_DAEMON -- The start-stop-daemon applet is not compatible with
-start-stop-daemon in OpenRC.
-
-CONFIG_MOUNT -- The mount applet does not support the -O [no]_netdev options to
-skip over or include network file systems when the -a option is present.
-
-CONFIG_UMOUNT -- The umount applet does not support the -O option along with -a.
-
-CONFIG_SWAPONOFF -- The swapon applet does not support the -e option
-or recognize the nofail option in fstab.
-
-CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
-
-CONFIG_BB_SYSCTL -- The sysctl applet does not support the --system command
-line switch.
-
-There is work to get most of these supported by busybox, so this file
-will be updated as things change.

FEATURE-REMOVAL-SCHEDULE

@@ -0,0 +1,49 @@
+The following is a list of files and features that are going to be removed in
+the source tree.  Every entry should contain what exactly is going away, why it
+is happening, and who is going to be doing the work.  When the feature is
+removed, it should also be removed from this file.
+
+---------------------------
+
+What: oldnet ADSL rp-pppoe mode
+
+When: undecided
+
+Why: Replaced by the oldnet PPP module
+
+Who:  Robin H. Johnson <robbat2@gentoo.org>
+
+---------------------------
+
+What: oldnet /etc/conf.d/wireless
+
+When: undecided
+
+Why: All configuration moved to /etc/conf.d/net
+
+Who:  Robin H. Johnson <robbat2@gentoo.org>
+
+---------------------------
+
+What: Service pause action
+
+When: Removed already, compatbility warning in place.
+
+Why: ...
+
+Who:
+
+---------------------------
+
+What: Service --startas, --chuid , --oknodo
+
+When: undecided
+
+Why: Obsolete or replaced by other options.
+	 --startas => use --name or --exec
+	 --chuid => use --user
+	 --oknodo => ignore return code instead
+
+Who:
+
+---------------------------

FEATURE-REMOVAL-SCHEDULE.md

@@ -1,79 +0,0 @@
-Features Scheduled for Removal
-==============================
-
-The following is a list of files and features that are going to be removed in
-the source tree.  Every entry should contain what exactly is going away, why it
-is happening, and who is going to be doing the work.  When the feature is
-removed, it should also be removed from this file.
-
-# Service pause action
-
-When: 1.0
-
-Why: The same affect can be obtained with the --nodeps option to stop.
-
-Who:
-
-# start-stop-daemon options --startas, --chuid , --oknodo
-
-When: 1.0
-
-Why: Obsolete or replaced by other options.
-
-* --startas => use --name or --exec
-* --chuid => use --user
-* --oknodo => ignore return code instead
-
-Who:
-
-# runscript and rc symbolic links
-
-When: 1.0
-
-Why: Deprecated in favor of openrc-run and openrc due to naming
-	 conflicts with other software.
-
-Who:
-
-# support for the opts variable in service scripts
-
-When: 1.0
-
-Why: Deprecated in favor of extra_commands, extra_started_commands
-	 and extra_stopped_commands.
-
-Who:
-
-# support for local_start and local_stop
-
-When: 1.0
-
-Why: Deprecated in favor of executable scripts in @SYSCONFDIR@/local.d
-
-Who:
-
-# the mtab service script
-
-When: force /etc/mtab to link to /proc/self/mounts in 1.0, remove
-	  service in 2.0
-
-Why: /etc/mtab should be a symbolic link to /proc/self/mounts on modern
-	 Linux systems
-
-Who:
-
-# C API Functions in rc.h
-
-If you have a c program that links to librc and uses functions from
-there, this section will list API functions which are deprecated and
-will be removed along with the reason they are being removed.
-
-## rc_getline()
-
-When: 1.0
-
-Why: The getline() function was standardized in POSIX.1-2008, so it
-	 should be available on POSIX systems.
-
-Who:
-

HISTORY.md

@@ -1,63 +0,0 @@
-OpenRC History
-==============
-
-This history of OpenRC was written by Daniel Robbins, Roy Marples, William
-Hubbs and others.
-
-The Gentoo modular init scripts were developed by Daniel Robbins for Gentoo
-Linux 1.0_rc6 during most of 2001 and released in September 2001. After their
-development, the dependency-based init script system was maintained by a
-number of senior developers, starting with Azarah (Martin Schlemmer), with
-migration to the new init system assisted by Woodchip (Donnie Davies) who
-converted all ebuild init scripts to work with the new system. As Grant
-Goodyear notes: 
-
-"My recollection is that one of woodchip's more impressive early feats
-was the complete replacement of all of the init scripts in Portage
-for Gentoo Linux 1.0_rc6. Through 1.0_rc5 Gentoo had used fairly
-standard rc scripts modified from Stampede Linux, but for 1.0_rc6 Daniel
-Robbins (drobbins) and Martin Schlemmer (azarah) had created a new
-dependency-based init script system that is still used today. Within a
-span of days Donny rewrote every single init script in the Portage tree
-and committed new masked packages to await the release of 1.0_rc6. Thanks to
-woodchip (and drobbins and azarah, of course) the
-transition to the new init scripts was nearly painless." [1] 
-
-Roy Marples became a Gentoo/Linux developer in 2004 and wrote the modular
-network scripts for the Gentoo baselayout package. Towards the end of 2005,
-he became the primary maintainer for baselayout and the init scripts. 
-
-At the start of 2007, He announced the ongoing development of
-baselayout-2, containing a rewritten core coded in C and allowing POSIX sh
-init scripts instead of forcing the use of bash. By mid 2007, He had
-re-implemented the Gentoo init script design created by Daniel Robbins,
-using an entirely new code base. Alpha and pre-release baselayout-2
-snapshots were added to Gentoo's Portage tree as an optional component.
-
-Toward the end of 2007, Roy retired as a Gentoo developer.
-Baselayout-2 was still in the pre stage, and aside from the gentoo-fbsd
-users, it was masked. However, He desired to keep the baselayout-2
-project moving forward as an independent project. The Gentoo Council
-permitted Him to release OpenRC under the 2-clause BSD license,
-managed by him as an external project. 
-
-Around mid-2010, Roy decided to no longer maintain OpenRC. At this
-point, he transferred development back to Gentoo.
-
-William Hubbs, and several other Gentoo developers,  started working on
-OpenRC around this point and brought OpenRC-0.8.x to Gentoo Linux's stable
-tree in 2011.
-
-In 2013 the OpenRC team became independent from Gentoo again and moved primary
-development to github.
-
-Daniel Robbins continues to maintain an independent, forked
-version of OpenRC for Funtoo Linux, which includes a Funtoo-specific network
-configuration system. 
-
-On 17-Dec-2015 utc, Roy gave the OpenRC developers permission to replace his
-copyrights in all source files with a generic Copyright assertion for
-the OpenRC developers as long as we keep the original copyright in the
-binaries and  LICENSE file.
-
-[1] http://www.gentoo.org/news/en/gwn/20040426-newsletter.xml

LICENSE

@@ -1,24 +0,0 @@
-Copyright (c) 2007-2008, Roy Marples <roy@marples.name>
-Copyright (c) 2007-2015, the OpenRC authors
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.

Makefile

@@ -1,24 +1,14 @@
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+# OpenRC Makefile
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
-TOP:=		${dir ${realpath ${firstword ${MAKEFILE_LIST}}}}
-MK=			${TOP}/mk
+include Makefile.inc
 
-include ${TOP}/Makefile.inc
+SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
 
-SUBDIR=		conf.d etc init.d local.d man scripts sh src support sysctl.d
-
-# Build bash completion or not
-MKBASHCOMP?=	no
-ifeq (${MKBASHCOMP},yes)
-SUBDIR+=	bash-completion
+# Build our old net foo or not
+ifeq (${MKNET},oldnet)
+SUBDIR+=	net doc
 endif
 
 # Build pkgconfig or not
@@ -27,23 +17,17 @@ ifeq (${MKPKGCONFIG},yes)
 SUBDIR+=	pkgconfig
 endif
 
-# Build zsh completion or not
-MKZSHCOMP?=	no
-ifeq (${MKZSHCOMP},yes)
-SUBDIR+=	zsh-completion
-endif
-
-# We need to ensure that runlevels is done last other than test
+# We need to ensure that runlevels is done last
 SUBDIR+=	runlevels
-SUBDIR+=	test
 
 INSTALLAFTER=	_installafter
 
+MK= 		mk
 include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/gitver.mk
+include ${MK}/git.mk
 
 _installafter:
 ifeq (${MKPREFIX},yes)

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.42.1
+VERSION=	0.11.4
 PKG=		${NAME}-${VERSION}

NEWS.md

@@ -1,331 +0,0 @@
-OpenRC NEWS
-===========
-
-This file will contain a list of notable changes for each release. Note
-the information in this file is in reverse order.
-
-## OpenRC 0.42
-
-openrc-shutdown now has the ability to shut down sysvinit-based systems.
-
-A guide has been added for migrating systems using another init system
-to openrc-init.
-
-## OpenRC 0.41.
-
-This version adds the ability to format the output of rc-status when
-showing the status of services in a runlevel so that it may be parsed.
-Currently, the -f switch only accepts ini as an argument which
-causes the output to be in the .ini format.
-
-This version adds an experimental build time switch to allow setting the
-default shell to use for service scripts.
-By default, this is set to /bin/sh if it is changed, the new shell must
-be able to understand posix-compatible syntax.
-
-## OpenRC 0.40
-
-In this version, the keymaps and termencoding services on Linux needed
-to be modified so they do not write to the root file system. This was
-done so they can run earlier in the boot sequence. AS a result, you will
-need to add save-termencoding and save-keymaps to your boot runlevel.
-This can be done as follows:
-
-```
-# rc-update add save-keymaps boot
-# rc-update add save-termencoding boot
-```
-
-## OpenRC 0.39
-
-This version removes the support for addons.
-The only place I know that this was used was Gentoo Baselayout 1.x, so
-it shouldn't affect anyone since baselayout-1 has been dead for a few
-years.
-
-Since all supported Linux kernel versions now make efivarfs immutable
-and all of the tools that access efivarfs are aware of this, we no
-longer mount efivarfs read-only. See the following github issue for more
-information:
-
-https://github.com/openrc/openrc/issues/238
-
-This version adds timed shutdown and cancelation of shutdown to
-openrc-shutdown. Shutdowns can now be delayed for a certain amount of
-time or scheduled for an exact time.
-
-supervise-daemon supports health checks, which are a periodic way to make sure a
-service is healthy. For more information on setting this up, please see
-supervise-daemon-guide.md.
-
-The --first-time switch has been added to all modprobe commands in the
-modules service. This means that, on Linux, you will see failures if a
-module was loaded by an initramfs or device manager before this service
-runs. These messages are harmless, but to clean them up, you should adjust your
-modules autoload configuration.
-
-## OpenRC 0.37
-
-start-stop-daemon now supports logging stdout and stderr of daemons to
-processes instead of files. These processes are defined by the
-output_logger and error_logger variables in standard service scripts, or
-by the  -3/--output-logger or -4/--error-logger switches if you use
-start-stop-daemon directly. For more information on this, see the
-start-stop-daemon man page.
-
-## OpenRC 0.36
-
-In this release, the modules-load service has been combined into the
-modules service since there is no reason I know of to keep them
-separate. However, modules also provides modules-load in case you were
-using modules-load in  your dependencies.
-
-The consolefont, keymaps, numlock and procfs service scripts no longer
-have a dependency on localmount.
-If you are a linux user and are still separaating / from /usr,
-you will need to add the following line to the appropriate conf.d files:
-
-rc_need="localmount"
-
-## OpenRC 0.35
-
-In this version, the cgroups mounting logic has been moved from the
-sysfs service to the cgroups service. This was done so cgroups can be
-mounted inside an lxc/lxd container without using the other parts of the
-sysfs service.
-
-?As a result of this change, if you are upgrading, you need to add
-cgroups to your sysinit runlevel by running the following command as
-root:
-
-```
-# rc-update add cgroups sysinit
-```
-
-For more information, see the following issue:
-
-https://github.com/openrc/openrc/issues/187
-
-Consider this your second notification with regard to /etc/mtab being a
-file instead of a symbolic link.
-
-In this version, the mtab service will complain loudly if you have
-mtab_is_file set to yes and recommend that you change this to no and
-restart the mtab service to migrate /etc/mtab to a symbolic link.
-
-If there is a valid technical reason to keep /etc/mtab as a flat file
-instead of a symbolic link to /proc/self/mounts, we are interested and
-we will keep the support in that case. Please open an issue and let us
-know however. Otherwise, consider this your final notice that the mtab
-service will be removed in the future.
-
-## OpenRC 0.33
-
-This version removes the "service" binary which was just a copy of
-"rc-service" provided for compatibility.
-
-If you still need the "service" binary, as opposed to "rc-service", it is
-recommended that you use something like Debian's init-system-helpers.
-Otherwise, just use "rc-service" in place of "service".
-
-## OpenRC 0.31
-
-This version adds support for Control Groups version 2, which is
-considered stable as of Linux-4.13. Please see /etc/rc.conf for
-documentation on how to configure control groups.
-
-## OpenRC-0.28
-
-This version mounts efivars read only due to concerns about changes in
-this file system making systems unbootable.  If you need to change something
-in this path, you will need to re-mount it read-write, make the change
-and re-mount it read-only.
-
-Also, you can override this behavior by adding a line for efivars to
-fstab if you want efivars mounted read-write.
-
-For more information on this issue, see the following url:
-
-https://github.com/openrc/openrc/issues/134
-
-## OpenRC-0.25
-
-This version contains an OpenRC-specific implementation of init for
-Linux which can be used in place of sysvinit or any other init process.
-For information on its usage, see the man pages for openrc-init (8) and
-openrc-shutdown (8).
-
-## OpenRC-0.24.1
-
-This version starts cleaning up the dependencies so that rc_parallel
-will work correctly.
-
-The first step in this process is to remove the 'before *' from the
-depend functions in the clock services. This means some  services not
-controlled by OpenRC may now start before instead of after the clock
-service. If it is important for these services to start after the clock
-service, they need to have 'after clock' added to their depend
-functions.
-
-## OpenRC-0.24
-
-Since the deptree2dot tool and the perl requirement are completely
-optional, the deptree2dot tool has been moved to the support directory.
-As a result, the MKTOOLS=yes/no switch has been removed from the makefiles.
-
-This version adds the agetty service which can be used to spawn
-agetty on a specific terminal. This is currently documented in the
-agetty-guide.md file at the top level of this distribution.
-
-## OpenRC-0.23
-
-The tmpfiles.d processing code, which was part of previous versions of
-OpenRC, has been separated into its own package [1]. If you need to
-process systemd style tmpfiles.d files, please install this package.
-
-[1] https://github.com/openrc/opentmpfiles
-
-## OpenRC-0.22
-
-In previous versions of OpenRC, configuration information was processed
-so that service-specific configuration stored in /etc/conf.d/* was
-overridden by global configuration stored in /etc/rc.conf. This release
-reverses that. Global configuration is now overridden by
-service-specific configuration.
-
-The swapfiles service, which was basically a copy of the swap service,
-has been removed. If you are only using swap partitions, this change
-will not affect you. If you are using swap files, please adjust the
-dependencies of the swap service as shown in /etc/conf.d/swap.
-
-## OpenRC-0.21
-
-This version adds a daemon supervisor which can start daemons and
-restart them if they crash. See supervise-daemon-guide.md in the
-distribution for details on its use.
-
-It is now possible to mark certain mount points as critical. If these
-mount points are unable to be mounted, localmount or netmount will fail.
-This is handled in /etc/conf.d/localmount and /etc/conf.d/netmount. See
-these files for the setup.
-
-The deprecation messages in 0.13.x for runscript and rc are now
-made visible in preparation for the removal of these binaries in 1.0.
-
-The steps you should take to get rid of these warnings is to run openrc
-in initialization steps instead of rc and change the shebang lines in
-service scripts to refer to "openrc-run" instead of "runscript".
-
-In 0.21.4, a modules-load service was added. This works like the
-equivalent service in systemd. It looks for files named *.conf first in
-/usr/lib/modules-load.d, then /run/modules-load.d, then
-/etc/modules-load.d. These files contain a list of modules, one per
-line, which should be loaded into the kernel. If a file name appears in
-/run/modules-load.d, it overrides a file of the same name in
-/usr/lib/modules-load.d. A file appearing in /etc/modules-load.d
-overrides a file of the same name in both previous directories.
-
-## OpenRC-0.19
-
-This version adds a net-online service. By default, this
-service will check all known network interfaces for a configured
-interface or a carrier. It will register as started only when all
-interfaces are configured and there is at least a carrier on one
-interface. The behaviour of this service can be modified in
-/etc/conf.d/net-online.
-
-Currently, this only works on Linux, but if anyone wants to port to
-*bsd, that would be welcomed.
-
-## OpenRC-0.18.3
-
-Modern Linux systems expect /etc/mtab to be a symbolic link to
-/proc/self/mounts. Reasons for this change include support for mount
-namespaces, which will not work if /etc/mtab is a file.
-By default, the mtab service enforces this on each reboot.
-
-If you find that this breaks your system in some way, please do the
-following:
-
-- Set mtab_is_file=yes in /etc/conf.d/mtab.
-
-- Restart mtab. This will recreate the /etc/mtab file.
-
-- Check for an issue on https://github.com/openrc/openrc/issues
-  explaining why you need /etc/mtab to be a file. If there isn't one,
-  please open one and explain in detail why you need this to be a file.
-  If there is one, please add your comments to it. Please give concrete
-  examples of why  it is important that /etc/mtab be a file instead of a
-  symbolic link. Those comments will be taken into consideration for how
-  long to keep supporting mtab as a file or when the support can be
-  removed.
-
-## OpenRC-0.18
-
-The behaviour of localmount and netmount in this version is changing. In
-the past, these services always started successfully. In this version,
-they will be able to fail if file systems they mount fail to mount. If
-you have file systems listed in fstab which should not be mounted at
-boot time, make sure to add noauto to the mount options. If you have
-file systems that you want to attempt to mount at boot time but failure
-should be allowed, add nofail to the mount options for these file
-systems in fstab.
-
-## OpenRC-0.14
-
-The binfmt service, which registers misc binary formats with the Linux
-kernel, has been separated from the procfs service. This service will be
-automatically added to the boot runlevel for new Linux installs. When
-you upgrade, you will need to use rc-update to add it to your boot
-runlevel.
-
-The procfs service no longer automounts the deprecated usbfs and
-usbdevfs file systems. Nothing should be using usbdevfs any longer, and
-if you still need usbfs it can be added to fstab.
-
-Related to the above change, the procfs service no longer attempts to
-modprobe the usbcore module. If your device manager does not load it,
-you will need to configure the modules service to do so.
-
-The override order of binfmt.d and tmpfiles.d directories has been
-changed to match systemd. Files in /run/binfmt.d and /run/tmpfiles.d
-override their /usr/lib counterparts, and files in the /etc counterparts
-override both /usr/lib and /run.
-
-## OpenRC-0.13.2
-
-A chroot variable has been added to the service script variables.
-This fixes the support for running a service in a chroot.
-This is documented in man 8 openrc-run.
-
-The netmount service now mounts nfs file systems.
-This change was made to correct a fix for an earlier bug.
-
-## OpenRC-0.13
-
-/sbin/rc was renamed to /sbin/openrc and /sbin/runscript was renamed to
-/sbin/openrc-run due to naming conflicts with other software.
-
-Backward compatible symbolic links are currently in place so your
-system will keep working if you are using the old names; however, it is
-strongly advised that you migrate to the new names because the symbolic
-links will be removed in the future.
-Warnings have been added to assist with this migration; however, due to the
-level of noise they produce, they only appear in verbose mode in this release.
-
-The devfs script now handles the initial mounting and setup of the
-/dev directory. If /dev has already been mounted by the kernel or an
-initramfs, devfs will remount /dev with the correct mount options
-instead of mounting a second /dev over the existing mount point.
-
-It attempts to mount /dev from fstab first if an entry exists there. If
-it doesn't it attempts to mount devtmpfs if it is configured in the
-kernel. If not, it attempts to mount tmpfs.
-If none of these is available, an error message is displayed and static
-/dev is assumed.
-
-## OpenRC-0.12
-
-The net.* scripts, originally from Gentoo Linux, have
-been removed. If you need these scripts, look for a package called
-netifrc, which is maintained by them.

README

@@ -0,0 +1,88 @@
+OpenRC README
+
+
+Installation
+------------
+make install
+Yup, that simple. Works with GNU make.
+
+You may wish to tweak the installation with the below arguments
+PROGLDFLAGS=-static
+LIBNAME=lib64
+DESTDIR=/tmp/openrc-image
+MKNET=oldnet
+MKPAM=pam
+MKPREFIX=yes
+MKPKGCONFIG=no
+MKSELINUX=yes
+MKSTATICLIBS=no
+MKTERMCAP=ncurses
+MKTERMCAP=termcap
+PKG_PREFIX=/usr/pkg
+LOCAL_PREFIX=/usr/local
+PREFIX=/usr/local
+
+We don't support building a static OpenRC with PAM.
+You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
+If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
+so that all malloc memory should be freed at exit.
+If you are building OpenRC for a Gentoo Prefix installation, add
+MKPREFIX=yes.
+
+You can also brand OpenRC if you so wish like so
+BRANDING=\"Gentoo/$(uname -s)\"
+
+PKG_PREFIX should be set to where packages install to by default.
+LOCAL_PREFIX should be set when to where user maintained packages are.
+Only set LOCAL_PREFIX if different from PKG_PREFIX.
+PREFIX should be set when OpenRC is not installed to /.
+
+If any of the following files exist then we do not overwrite them
+/etc/devd.conf
+/etc/rc
+/etc/rc.shutdown
+/etc/conf.d/*
+
+rc and rc.shutdown are the hooks from the BSD init into OpenRC.
+devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
+hook into OpenRC.
+inittab is the same, but for SysVInit as used by most Linux distributions.
+This can be found in the support folder.
+Obviously, if you're installing this onto a system that does not use OpenRC
+by default then you may wish to backup the above listed files, remove them
+and then install so that the OS hooks into OpenRC.
+
+init.d.misc is not installed by default as the scripts will need
+tweaking on a per distro basis. They are also non essential to the operation
+of the system.
+
+
+Reporting Bugs
+--------------
+Since Gentoo Linux is hosting OpenRC development, Bugs should go to
+the Gentoo Bugzilla:
+	http://bugs.gentoo.org/
+They should be filed under the "Gentoo Hosted Projects" product and
+the "openrc" component.
+
+
+History - by Roy Marples
+------------------------
+I became a Gentoo/Linux developer in 2004 and wrote the modular network
+scripts for the Gentoo baselayout package. baselayout is a collection of
+bash scripts to bring up your computer and its services.
+Then towards the end of 2005 I found myself as the primary maintainer
+for baselayout.
+
+At the start of 2007, baselayout-2 is announced to the world, re-writing the
+core of baselayout in C and allowing POSIX sh init scripts instead of
+forcing the use of bash. By Mid 2007 I have re-written everything, including
+init scripts, and alpha and pre baselayout-2 snapshots where put into Gentoo.
+Towards the end of 2007 I retired as a Gentoo developer for reasons I won't
+go into here. baselayout-2 was still in the pre stage, and aside from the
+fbsd users, it was masked everywhere. However, I also desired to keep the
+baselayout-2 project alive, but outside of Gentoo and into other projects
+such as FreeBSD.
+
+As such, the Gentoo Council have allowed the creation of OpenRC under the
+2 clause BSD license, managed by me as an external project.

README.md

@@ -1,96 +0,0 @@
-OpenRC README
-=============
-
-OpenRC is a dependency-based init system that works with the
-system-provided init program, normally `/sbin/init`. Currently, it does
-not have an init program of its own.
-
-## Installation
-
-OpenRC requires GNU make.
-
-Once you have GNU Make installed, the default OpenRC installation can be
-executed using this command:
-
-make install
-
-## Configuration
-
-You may wish to configure the installation by passing one or more of the
-below arguments to the make command
-
-```
-PROGLDFLAGS=-static
-LIBNAME=lib64
-DESTDIR=/tmp/openrc-image
-MKBASHCOMP=no
-MKNET=no
-MKPAM=pam
-MKPREFIX=yes
-MKPKGCONFIG=no
-MKSELINUX=yes
-MKSTATICLIBS=no
-MKSYSVINIT=yes
-MKTERMCAP=ncurses
-MKTERMCAP=termcap
-MKZSHCOMP=no
-PKG_PREFIX=/usr/pkg
-LOCAL_PREFIX=/usr/local
-PREFIX=/usr/local
-BRANDING=\"Gentoo/$(uname -s)\"
-SH=/bin/sh
-```
-
-## Notes
-
-We don't support building a static OpenRC with PAM.
-
-You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`.
-
-If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`.
-
-`PKG_PREFIX` should be set to where packages install to by default.
-
-`LOCAL_PREFIX` should be set when to where user maintained packages are.
-Only set `LOCAL_PREFIX` if different from `PKG_PREFIX`.
-
-`PREFIX` should be set when OpenRC is not installed to /.
-
-If any of the following files exist then we do not overwrite them
-
-```
-/etc/devd.conf
-/etc/rc
-/etc/rc.shutdown
-/etc/conf.d/*
-```
-
-`rc` and `rc.shutdown` are the hooks from the BSD init into OpenRC.
-
-`devd.conf` is modified from FreeBSD to call `/etc/rc.devd` which is a
-generic hook into OpenRC.
-
-`inittab` is the same, but for SysVInit as used by most Linux distributions.
-This can be found in the support folder.
-
-Obviously, if you're installing this onto a system that does not use
-OpenRC by default then you may wish to backup the above listed files,
-remove them and then install so that the OS hooks into OpenRC.
-
-## Reporting Bugs
-
-If you are using Gentoo Linux, bugs can be filed on their bugzilla under
-the `gentoo hosted projects` product and the `openrc` component [1].
-Otherwise, you can report issues on our github [2].
-
-Better yet, if you can contribute code, please feel free to submit pull
-requests [3].
-
-## IRC Channel
-
-We have an official irc channel, #openrc on freenode, feel free to join
-us there.
-
-[1]	https://bugs.gentoo.org/
-[2]	https://github.com/openrc/openrc/issues
-[3]	https://github.com/openrc/openrc/pulls

README.newnet

@@ -1,3 +1,7 @@
+The following applies only to the newnet stack, which is not presently
+maintained in OpenRC. The oldnet stack is maintained instead.
+- Robin H. Johnson <robbat2@gentoo.org>, 2011/02/21
+
 OpenRC Network Ideals
 ---------------------
 

STYLE

@@ -1,24 +1,23 @@
-OpenRC Coding Style Guide
-=========================
-
 This is the openrc style manual.  It governs the coding style of all code
 in this repository.  Follow it.  Contact openrc@gentoo.org for any questions
 or fixes you might notice.
 
-## C CODE
+##########
+# C CODE #
+##########
 
-The BSD Kernel Normal Form (KNF) style is used [1]. Basically, it is like
-K&R/LKML, but wrapped lines that are indented use 4 spaces. Here are the
-highlights.
+The BSD Kernel Normal Form (KNF) style is used:
+	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
+Basically, it's like K&R/LKML, but wrapped lines that are indented use 4 spaces.
 
-- no trailing whitespace
-- indented code use tabs (not line wrapped)
-- cuddle the braces (except for functions)
-- space after native statements and before paren (for/if/while/...)
-- no space between function and paren
-- pointer asterisk cuddles the variable, not the type
+Highlights:
+	- no trailing whitespace
+	- indented code use tabs (not line wrapped)
+	- cuddle the braces (except for functions)
+	- space after native statements and before paren (for/if/while/...)
+	- no space between function and paren
+	- pointer asterisk cuddles the variable, not the type
 
-```
 void foo(int c)
 {
 	int ret = 0;
@@ -33,15 +32,16 @@ void foo(int c)
 
 	return ret;
 }
-```
 
-## COMMIT MESSAGES
+##################
+# COMMIT MESSAGES #
+##################
 
 The following is an example of a correctly formatted git commit message
 for this repository. Most of this information came from this blog post
-[2], so I would like to thank the author.
+[1], so I would like to thank the author.
 
-```
+### cut here ###
 Capitalized, short (50 chars or less) summary
 
 More detailed explanatory text, if necessary.  Wrap it to about 72
@@ -51,7 +51,7 @@ line separating the summary from the body is critical (unless you omit
 the body entirely); tools like rebase can get confused if you run the
 two together.
 
-Write your commit message in the imperative: "Fix bug" and not "Fixed
+Write your commit message in the present tense: "Fix bug" and not "Fixed
 bug."  This convention matches up with commit messages generated by
 commands like git merge and git revert.
 
@@ -67,7 +67,7 @@ Further paragraphs come after blank lines.
 Reported-by: User Name <email>
 X-[Distro]-Bug: BugID
 X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
-```
+### cut here ###
 
 If you did not write the code and the patch does not include authorship
 information in a format git can use, please use the --author option of the
@@ -81,5 +81,5 @@ different from the author and committer.
   *BSD. Also, [Distro] should be replaced with the name of the
   distribution, e.g. X-Gentoo-Bug.
 
-[1]	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
-[2] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
+[1] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
+

agetty-guide.md

@@ -1,19 +0,0 @@
-Setting up the agetty service in OpenRC
-=================================xxxxxx
-
-The agetty service is an OpenRC specific way to monitor and respawn a
-getty, using agetty, on Linux. To use this method, make sure you aren't
-spawning a getty manager for this port some other way (such as through
-sysvinit/inittab), then run the following commands as root.
-
-Note that [port] refers to the port you are spawning the getty on, for
-example, tty1 or ttyS0. The full path to it, for example, /dev/tty1
-should not be used.
-
-```
-# cd /etc/init.d
-# ln -s agetty agetty.[port]
-# cd /etc/conf.d
-# cp agetty agetty.[port]
-#rc-update add agetty.[port] [runlevel]
-```

bash-completion/Makefile

@@ -1,11 +0,0 @@
-DIR=	${BASHCOMPDIR}
-CONF=	openrc \
-		openrc-service-script \
-		rc-service \
-		rc-status \
-		rc-update \
-
-MK=	../mk
-include ${MK}/os.mk
-
-include ${MK}/scripts.mk

bash-completion/openrc

@@ -1,24 +0,0 @@
-# Copyright (c) 2017 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-#
-# openrc completion command
-#
-_openrc()
-{
-	local cur
-	COMPREPLY=()
-	cur="${COMP_WORDS[COMP_CWORD]}"
-	if [[ ${#COMP_WORDS[*]} -le 2 ]]; then
-		COMPREPLY=($(compgen -W "$(rc-status --list)" -- $cur))
-	fi
-	return 0
-} &&
-complete -F _openrc openrc

bash-completion/openrc-service-script

@@ -1,29 +0,0 @@
-# Copyright (c) 2017 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-_openrc_service_script()
-{
-	local script="${COMP_WORDS[0]}"
-	local cur="${COMP_WORDS[$COMP_CWORD]}"
-
-	if [[ ( -f "${script}" || -h "${script}" ) && -r "${script}" ]] \
-	&& [[ "$(head -n 1 "${script}")" =~ \#\!.*/openrc-run ]]
-	then
-		[[ $COMP_CWORD -gt 1 ]] && return 1
-		COMPREPLY=($(opts="start stop status restart pause zap ineed needsme iuse usesme broken"; \
-			eval "$(grep '^opts=' "${script}")"; echo "${opts}"))
-		[[ -n "$COMPREPLY" ]] || COMPREPLY=(start stop restart zap)
-		COMPREPLY=($(compgen -W "${COMPREPLY[*]}" -- "${cur}"))
-	else
-		COMPREPLY=($(compgen -o default -- "${cur}"))
-	fi
-	return 0
-}
-complete -F _openrc_service_script */etc/init.d/*

bash-completion/rc-service

@@ -1,116 +0,0 @@
-# Copyright (c) 2017 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-#
-# rc-service completion command
-#
-_rc_service()
-{
-	local cur prev numwords opts
-	local words i x filename
-	local action actionpos
-	COMPREPLY=()
-	cur="${COMP_WORDS[COMP_CWORD]}"
-	prev="${COMP_WORDS[COMP_CWORD-1]}"
-	numwords=${#COMP_WORDS[*]}
-
-	if [[ ${prev} == '>' || ${prev} == '<' ]] ; then
-		COMPREPLY=($(compgen -f -- ${cur}))
-		return 0
-	fi
-
-	# find action
-	for x in ${COMP_LINE} ; do
-		if [[ ${x} =~ --(list|exists|resolve) ]] || [[ ${x} =~ -(l|e|r) ]]
-		then
-			action=${x}
-			break
-		fi
-	done
-	if [[ -n ${action} ]]; then
-		for ((i = 0; i < ${numwords}; i++ )); do
-			if [[ ${COMP_WORDS[${i}]} == "${action}" ]]; then
-				actionpos=${i}
-				break
-			fi
-		done
-
-		for ((i = 1; i < ${numwords}; i++ )); do
-			if [[ ! ${COMP_WORDS[$i]} == -* ]]; then
-				break
-			fi
-		done
-	fi
-
-	if [[ ${COMP_CWORD} -eq 3 ]]; then
-		return 1
-	fi
-
-	# check if an option was typed
-	if [[ ${cur} == -* ]]; then
-		if [[ ${cur} == --* ]]; then
-			opts="--list --exists --resolve"
-			COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
-			return 0
-		elif [[ ${cur} == -* ]]; then
-			opts="-l -e -r"
-			COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
-			return 0
-		fi
-
-		# NOTE: This slows things down!
-		# (Adapted from bash_completion by Ian Macdonald <ian@caliban.org>)
-		# This removes any options from the list of completions that have
-		# already been specified on the command line.
-		COMPREPLY=($(echo "${COMP_WORDS[@]}" | \
-		(while read -d ' ' i; do
-			[[ -z ${i} ]] && continue
-			# flatten array with spaces on either side,
-			# otherwise we cannot grep on word boundaries of
-			# first and last word
-			COMPREPLY=" ${COMPREPLY[@]} "
-			# remove word from list of completions
-			COMPREPLY=(${COMPREPLY/ ${i%% *} / })
-		done
-		echo ${COMPREPLY[@]})))
-
-		return 0
-	else
-		# no option was typed
-		if [[ ${COMP_CWORD} -eq 1 ]]; then			  # if first word typed
-			words="$(rc-service --list | grep ^${cur})"		  # complete for init scripts
-			COMPREPLY=($(for i in ${words} ; do \
-			[[ ${i} == ${cur}* ]] && echo ${i} ; \
-			done))
-			return 0
-		elif [[ ${COMP_CWORD} -eq 2 ]] && [[ ${prev} != -* ]]; then # if second word typed and we didn't type in a function
-			rc-service --exists "$prev" || return
-			shopt -s extglob
-			while read -r _ line; do
-				if [[ $line == +([[:alnum:]_]):* ]]; then
-					opts+="${line%%:*} "
-				fi
-			done < <(rc-service "$prev" describe 2>&1)
-			shopt -u extglob
-			COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
-			return 0
-		fi
-	fi
-	if [[ ${action} == '--exists' ]] || [[ ${action} == '-e' ]] || \
-		[[ ${action} == '--resolve' ]]  || [[ ${action} == '-r' ]]; then
-		words="$(rc-service --list | grep ^${cur})"
-		COMPREPLY=($(for i in ${words} ; do \
-			[[ ${i} == ${cur}* ]] && echo ${i} ; \
-		done))
-		return 0
-	fi
-	return 0
-} &&
-complete -F _rc_service rc-service

bash-completion/rc-status

@@ -1,31 +0,0 @@
-# Copyright (c) 2017 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-#
-# rc-status completion command
-#
-_rcstatus()
-{
-	local cur
-	cur="${COMP_WORDS[COMP_CWORD]}"
-	if [[ $COMP_CWORD -eq 1 ]]; then
-		if [[ "${cur}" == --* ]]; then
-			COMPREPLY=($(compgen -W '--all --list --unused' -- ${cur}))
-		elif [[ "${cur}" == -* ]]; then
-			COMPREPLY=($(compgen -W '-a -l -u' -- ${cur}))
-		else
-			COMPREPLY=($(compgen -W "$(rc-status --list)" -- ${cur}))
-		fi
-	else
-		unset COMPREPLY
-	fi
-	return 0
-} &&
-complete -F _rcstatus rc-status

bash-completion/rc-update

@@ -1,42 +0,0 @@
-# Copyright (c) 2017 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-#
-# rc-update completion command
-#
-_rc_update()
-{
-	local cur show
-	COMPREPLY=()
-	cur="${COMP_WORDS[COMP_CWORD]}"
-	if [[ $COMP_CWORD -eq 1 ]]; then
-		if [[ "${cur}" == -* ]]; then
-			COMPREPLY=($(compgen -W '-a -d -s' -- ${cur}))
-		else
-			COMPREPLY=($(compgen -W 'add del show' ${cur}))
-		fi
-	else
-		if [[ "${COMP_WORDS[1]}" == "show" ]] || [[ "${COMP_WORDS[1]}" == "-s" ]]; then
-			show="TRUE"
-		fi
-		if ([[ $COMP_CWORD -eq 3 ]] && [[ -z "$show" ]]) || \
-			([[ $COMP_CWORD -eq 2 ]] && [[ -n "$show" ]]); then
-		COMPREPLY=($(compgen -W "$(rc-status --list)" -- $cur))
-		elif [[ $COMP_CWORD -eq 2 ]]; then
-			COMPREPLY=($(compgen -W "$(rc-service --list)" $cur))
-		elif [[ ${#COMP_WORDS[*]} -gt 2 ]] ; then
-			COMPREPLY=($(compgen -W "$(rc-status --list)" -- $cur))
-		else
-			unset COMPREPLY
-		fi
-	fi
-	return 0
-} &&
-complete -F _rc_update rc-update

ci/cirrus.sh

@@ -1,21 +0,0 @@
-#!/bin/bash
-# Copyright (c) 2007-2018 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-set -e
-set -u
-set -x
-
-# These are steps to run on Cirrus CI under a jailed FreeBSD system.
-# See $TOP/.cirrus.yml for more info about the Cirrus CI setup.
-
-cpus=$(getconf NPROCESSORS_CONF || echo 1)
-gmake -j"${cpus}" -O
-gmake test

ci/travis.sh

@@ -1,23 +0,0 @@
-#!/bin/bash
-# Copyright (c) 2007-2018 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-set -e
-set -u
-set -x
-
-# These are steps to run on TravisCI under a containerized Ubuntu system.
-# See $TOP/.travis.yml for more info about the TravisCI setup.
-
-cpus=$(getconf _NPROCESSORS_CONF || echo 1)
-# make on TravisCI doesn't support -O yet
-make -j"${cpus}"
-
-make test

conf.d/.gitignore

@@ -0,0 +1,2 @@
+network
+staticroute

conf.d/Makefile

@@ -1,20 +1,26 @@
-include ../mk/net.mk
-
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount netmount swap urandom ${CONF-${OS}}
+CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
+		${CONF-${OS}}
 
-ifeq (${MKNET},yes)
+ifeq (${MKNET},)
 CONF+= network staticroute
+TARGETS+=	network staticroute
+CLEANFILES+=	network staticroute
 endif
 
 MK=	../mk
 include ${MK}/os.mk
 
-CONF-FreeBSD=	ipfw modules moused powerd rarpd savecore syscons
+CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
 
-CONF-Linux=	agetty consolefont devfs dmesg hwclock keymaps killprocs modules \
-	mtab net-online
+CONF-Linux=	consolefont dmesg hwclock keymaps killprocs modules
 
 CONF-NetBSD=	moused rarpd savecore
 
 include ${MK}/scripts.mk
+
+network: network.in network${SFX}
+	cat $^ > $@
+
+staticroute: staticroute${SFX}
+	cp $@${SFX} $@

conf.d/agetty

@@ -1,11 +0,0 @@
-# make agetty quiet
-#quiet="yes"
-
-# Set the baud rate of the terminal line
-#baud=""
-
-# set the terminal type
-#term_type="linux"
-
-# extra options to pass to agetty for this port
-#agetty_options=""

conf.d/bootmisc

@@ -8,8 +8,3 @@ wipe_tmp="YES"
 # Write the initial dmesg log into /var/log/dmesg after boot
 # This may be useful if you need the kernel boot log afterwards
 log_dmesg="YES"
-
-# Save the previous dmesg log to dmesg.old
-# This may be useful if you need to compare the current boot to the
-# previous one.
-#previous_dmesg=no

conf.d/devfs

@@ -1,8 +0,0 @@
-# OpenRC will attempt each of the following in succession to mount /dev.
-#
-# 1. If there is an entry for /dev in fstab, it will be used.
-# 2. If devtmpfs is defined in the kernel, it will be used.
-# 3. If tmpfs is defined in the kernel, it will be used.
-#
-# Set this to yes if you do not want OpenRC to attempt to mount /dev.
-# skip_mount_dev="NO"

conf.d/fsck

@@ -32,9 +32,3 @@ fsck_on_battery="YES"
 # This is useful when periodic filesystem checks are causing undesirable
 # delays at startup, but such delays at shutdown are acceptable.
 fsck_shutdown="NO"
-
-# fsck_abort_on_errors can be set to no to cause fsck to not abort on
-# errors.
-# This is useful when periodic filesystem checks are causing undesirable
-# aborts.
-fsck_abort_on_errors="YES"

conf.d/hwclock

@@ -7,8 +7,8 @@ clock="UTC"
 # If you want the hwclock script to set the system time (software clock)
 # to match the current hardware clock during bootup, leave this
 # commented out.
-# However, you can set this to "NO" if you are running a modern kernel
-# and using NTP to synchronize your system clock.
+# However, you can set this to "NO" ifyou are running a modern kernel
+# with CONFIG_RTC_HCTOSYS set to y and your hardware clock set to UTC.
 #clock_hctosys="YES"
 
 # If you do not want to set the hardware clock to the current system

conf.d/keymaps

@@ -18,6 +18,6 @@ extended_keymaps=""
 # For a list of valid sets, run `dumpkeys --help`
 dumpkeys_charset=""
 
-# Some fonts map AltGr-E to the currency symbol instead of the Euro.
+# Some fonts map AltGr-E to the currency symbol ¤ instead of the Euro €
 # To fix this, set to "yes"
 fix_euro="NO"

conf.d/killprocs

@@ -1,6 +1,3 @@
-# If you wish to pass any options to kill_all during shutdown,
+# If you wish to pass any options to killall5 during shutdown,
 # you should do so here.
-#
-# The setting is called killall5_opts because the options here are meant
-# to be identical to those you could pass to killall5.
 killall5_opts=""

conf.d/localmount

@@ -1,10 +1,3 @@
 # Stop the unmounting of certain points.
 # This could be useful for some NFS related work.
 #no_umounts="/dir1:/var/dir2"
-#
-# Mark certain mount points as critical.
-# This contains a space separated list of mount points which should be
-# considered critical. If one of these mount points cannot be mounted,
-# localmount will fail.
-# By default, this is empty.
-#critical_mounts="/home /var"

conf.d/modules

@@ -1,17 +1,18 @@
-# Linux users can define a list of modules for a specific kernel version,
-# a released kernel version, a main kernel version or all kernel versions.
+# You can define a list modules for a specific kernel version,
+# a released kernel version, a main kernel version or just a list.
 # The most specific versioned variable will take precedence.
-# FreeBSD users can only use the modules="foo bar" setting.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
 #modules_2="ipv6"
 #modules="ohci1394"
 
-# Linux users can give the modules some arguments if needed, per version
-# if necessary.
+# You can give modules a different name when they load - the new name
+# will also be used to pick arguments below.
+#modules="dummy:dummy1"
+
+# Give the modules some arguments if needed, per version if necessary.
 # Again, the most specific versioned variable will take precedence.
-# This is not supported on FreeBSD.
 #module_ieee1394_args="debug"
 #module_ieee1394_args_2_6_23_gentoo_r5="debug2"
 #module_ieee1394_args_2_6_23="debug3"

conf.d/mtab

@@ -1,13 +0,0 @@
-# As far as we are aware, there are no modern linux tools or use cases
-# which require /etc/mtab to be a separate file from /proc/self/mounts,
-# so this setting should be commented out.
-# If it is set to yes, please comment it out and run this command:
-# # rc-service mtab restart
-# In the future, the mtab service will be removed since we are not aware
-# of any need to manipulate /etc/mtab as a separate file from
-# /proc/self/mounts.
-# If you have a technical reason we should keep this support, please
-# open an issue at https://github.com/openrc/openrc/issues and let us
-# know about your situation.
-# This setting controls whether /etc/mtab is a file or symbolic link.
-# mtab_is_file=no

conf.d/net

@@ -0,0 +1,4 @@
+# This blank configuration will automatically use DHCP for any net.*
+# scripts in /etc/init.d.  To create a more complete configuration,
+# please review /usr/share/doc/openrc*/net.example* and save your configuration
+# in /etc/conf.d/net (this file :]!).

conf.d/net-online

@@ -1,18 +0,0 @@
-# The interfaces setting controls which interfaces the net-online
-# service considers in deciding whether the network is active. The
-# default is all interfaces that support ethernet.
-#interfaces=""
-
-# This setting controls whether a ping test is included in the test for
-# network connectivity after all interfaces are active.
-#include_ping_test=no
-
-# This setting is the host to attempt to ping if the above is yes.
-# The default is google.com.
-#ping_test_host=some.host.name
-
-# The timeout setting controls how long the net-online service waits
-# for the network to be configured.
-# The default is 120 seconds.
-# if this is set to 0, the wait is infinite.
-#timeout=120

conf.d/netmount

@@ -1,47 +1,20 @@
-# You will need to set the dependencies in the netmount script to match
-# the network configuration tools you are using. This should be done in
-# this file by following the examples below, and not by changing the
-# service script itself.
+# Depending on how mounting your network file systems behaves when your
+# network interfaces are down, you may need to set the netmount script to
+# require  specific network interfaces to be active. This file gives
+# examples of how to do this:
 #
-# Each of these examples is meant to be used separately. So, for
-# example, do not set rc_need to something like "net.eth0 dhcpcd".
-#
-# If you are using newnet and configuring your interfaces with static
-# addresses with the network script, you  should use this setting.
-#
-#rc_need="network"
+# If you are using newnet and configuring the interface with a static
+# address with the network script:
+# rc_need="network"
 #
 # If you are using oldnet, you must list the specific net.* services you
-# need.
+# need:
 #
-# This example assumes all of your netmounts can be reached on
-# eth0.
-#
-#rc_need="net.eth0"
-#
-# This example assumes some of your netmounts are on eth1 and some
-# are on eth2.
-#
-#rc_need="net.eth1 net.eth2"
+# rc_need="net.eth0"
+# rc_need="net.eth1 net.eth2"
 #
 # If you are using a dynamic network management tool like
-# NetworkManager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
-# manage the network interfaces with the routes to your netmounts, you
-# should list that tool.
+# networkmanager, dhcpcd, etc, you should list that tool here.
 #
-#rc_need="NetworkManager"
-#rc_need="dhcpcd"
-#rc_need="wicd"
-#
-# The default setting is designed to be backward compatible with our
-# current setup, but you are highly discouraged from using this. In
-# other words, please change it to be more suited to your system.
-#
-rc_need="net"
-#
-# Mark certain mount points as critical.
-# This contains aspace separated list of mount points which should be
-# considered critical. If one of these mount points cannot be mounted,
-# netmount will fail.
-# By default, this is empty.
-#critical_mounts="/home /var"
+# rc_need="networkmanager"
+# rc_need="dhcpcd"

conf.d/network

@@ -1,80 +0,0 @@
-# Assign static IP addresses and run custom scripts per interface.
-# Seperate commands with ;
-# Prefix with ! to run a shell script.
-# Use \$int to represent the interface
-#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
-
-# You also have ifup_eth0 and ifdown_eth0 to run other commands when
-# eth0 is started and stopped.
-# You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set keep_network=NO
-
-# Lastly, the interfaces variable pulls in virtual interfaces that cannot
-# be automatically detected.
-#interfaces="br0 bond0 vlan0"
-
-# You can also use files instead of variables here if you like:
-# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
-# /etc/ip.eth0 is equivalent to ifconfig_eth0
-# /etc/ifup.eth0 is equivalent to ifup_eth0
-# /etc/ifdown.eth0 is equivalent to ifdown_eth0
-# Any files found will automatically be put into the interfaces variable.
-# You don't need to escape variables in files, so use $int instead of \$int.
-
-# If you require DHCP, you should install dhcpcd and add it to the boot or
-# default runlevel.
-
-# NIS users can set the domain name here
-#domainname="foobar"
-
-# You can add a default route.
-# The way this is done is slightly different depending on the operating system.
-#
-# *BSD:
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"
-#Hurd/Linux (ifconfig):
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"
-
-# The remainder of this file applies to Linux only and shows how
-# iproute2 is supported along with other examples.
-
-# ifconfig under Linux is not that powerful and doesn't easily handle
-# multiple addresses
-# On the other hand, iproute2 is quite powerful and is also supported
-#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
-
-# You can also use iproute2 to add the default route.
-#defaultiproute="via 192.168.0.1"
-#defaultiproute6="via 2001:a:b:c"
-
-# ip doesn't handle MTU like ifconfig, but we can do it like so
-#ifup_eth0="ip link set \$int mtu 1500"
-
-# Create a bonded interface
-#interfaces="bond0"
-#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
-#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
-#ifdown_bond0="rmmod bonding"
-
-# Create tap interface and a bridge interface.
-# We add the tap to the bridge.
-# An external program, like dhcpcd, will configure the IP on the bridge
-#interfaces="tun0 br0"
-#ifup_tun0="tunctl -t \$int"
-#ifdown_tun0="tunctl -d \$int"
-#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
-#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
-
-# Create VLAN
-#interfaces="eth0_2 eth0_3 eth0_4"
-#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
-#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
-#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
-#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
-#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
-
-# Normally you would use wpa_supplicant to configure wireless, but you can
-# use iwconfig also
-#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.BSD.in

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"

conf.d/network.Linux.in

@@ -0,0 +1,43 @@
+
+# You can assign a default route
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"
+
+# ifconfig under Linux is not that powerful and doesn't easily handle
+# multiple addresses
+# On the other hand, ip (iproute2) is quite powerful and is also supported
+#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
+
+# You can also use ip to add the default route.
+#defaultiproute="via 192.168.0.1"
+#defaultiproute6="via 2001:a:b:c"
+
+# ip doesn't handle MTU like ifconfig, but we can do it like so
+#ifup_eth0="ip link set \$int mtu 1500"
+
+# Create a bonded interface
+#interfaces="bond0"
+#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
+#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
+#ifdown_bond0="rmmod bonding"
+
+# Create tap interface and a bridge interface.
+# We add the tap to the bridge.
+# An external program, like dhcpcd, will configure the IP on the bridge
+#interfaces="tun0 br0"
+#ifup_tun0="tunctl -t \$int"
+#ifdown_tun0="tunctl -d \$int"
+#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
+#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
+
+# Create VLAN
+#interfaces="eth0_2 eth0_3 eth0_4"
+#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
+#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
+#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
+#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
+#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
+
+# Normally you would use wpa_supplicant to configure wireless, but you can
+# use iwconfig also
+#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.in

@@ -0,0 +1,28 @@
+# Assign static IP addresses and run custom scripts per interface.
+# Seperate commands with ;
+# Prefix with ! to run a shell script.
+# Use \$int to represent the interface
+#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
+
+# You also have ifup_eth0 and ifdown_eth0 to run other commands when
+# eth0 is started and stopped.
+# You should note that we don't stop the network at system shutdown by default.
+# If you really need this, then set shutdown_network=YES
+
+# Lastly, the interfaces variable pulls in virtual interfaces that cannot
+# be automatically detected.
+#interfaces="br0 bond0 vlan0"
+
+# You can also use files instead of variables here if you like:
+# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
+# /etc/ip.eth0 is equivalent to ifconfig_eth0
+# /etc/ifup.eth0 is equivalent to ifup_eth0
+# /etc/ifdown.eth0 is equivalent to ifdown_eth0
+# Any files found will automatically be put into the interfaces variable.
+# You don't need to escape variables in files, so use $int instead of \$int.
+
+# If you require DHCP, you should install dhcpcd and it to the boot or
+# default runlevel.
+
+# NIS users can set the domain name here
+#domainname="foobar"

conf.d/staticroute

@@ -1,26 +0,0 @@
-# Static routes are defined differently depending on your operating
-# system, so please be sure to use the correct syntax.
-# Do not use this file to define the default route.
-# In all settings, multiple routes should be separated using ; or new lines.
-
-# Define static routes on Linux using route. See route(8) for syntax.
-#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
-#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
-
-# Define static routes on Linux using iproute2. See ip(8) for syntax.
-#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"
-
-# Define static routes on GNU/Hurd. See route(8) for syntax.
-# /etc/route.conf(5) takes precedence over this configuration.
-# FIXME: "net ..." not supported
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"
-
-# Define static routes on GNU/KFreeBSD. See route(8) for syntax.
-#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
-#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"
-
-# Define static routes on other BSD systems. See route(8) for syntax.
-# /etc/route.conf(5) takes precedence over this configuration.
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.BSD.in

@@ -0,0 +1,6 @@
+# Separate multiple routes using ; or new lines.
+# /etc/route.conf(5) takes precedence over this configuration.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.Linux.in

@@ -0,0 +1,8 @@
+# Separate multiple routes using ; or new lines.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
+#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
+
+# Example static routes using iproute2. See ip(8) for syntax.
+#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

conf.d/swap

@@ -1,13 +0,0 @@
-# If you are only using local swap partitions, you should not change
-# this file. Otherwise, you need to uncomment the below rc_before line
-# followed by the appropriate rc_need line.
-#rc_before="!localmount"
-#
-# If you are using swap files stored on local file systems, uncomment
-# this line.
-#rc_need="localmount"
-#
-# If you are using swap files stored on network file systems or swap
-# partitions stored on network block devices such as iSCSI, uncomment
-# this line.
-#rc_need="netmount"

conf.d/tmpfiles

@@ -0,0 +1,3 @@
+# Extra options for tmpfiles.sh
+#tmpfiles_opts="--verbose"
+tmpfiles_opts=""

doc/.gitignore

@@ -0,0 +1 @@
+net.example

doc/Makefile

@@ -0,0 +1,11 @@
+DIR=	${DOCDIR}/openrc
+SRCS=	net.example.in
+INC=	net.example
+
+MK=	../mk
+include ${MK}/os.mk
+
+%.example.in: %.example${SFX}
+	${CP} $< $@
+
+include ${MK}/scripts.mk

doc/net.example.BSD.in

@@ -0,0 +1,442 @@
+##############################################################################
+# QUICK-START
+#
+# The quickest start is if you want to use DHCP.
+# In that case, everything should work out of the box, no configuration
+# necessary, though the startup script will warn you that you haven't
+# specified anything.
+
+# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6
+# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have
+# the relevant kernel option enabled. So if you don't have an IPv6 enabled
+# kernel then remove the IPv6 address from your config.
+
+# If you want to use a static address or use DHCP explicitly, jump
+# down to the section labeled INTERFACE HANDLERS.
+#
+# If you want to do anything more fancy, you should take the time to
+# read through the rest of this file.
+
+##############################################################################
+# MODULES
+#
+# We now support modular networking scripts which means we can easily
+# add support for new interface types and modules while keeping
+# compatibility with existing ones.
+#
+# Modules load by default if the package they need is installed.  If
+# you specify a module here that doesn't have its package installed
+# then you get an error stating which package you need to install.
+# Ideally, you only use the modules setting when you have two or more
+# packages installed that supply the same service.
+#
+# In other words, you probably should DO NOTHING HERE...
+
+##############################################################################
+# INTERFACE HANDLERS
+
+# For a static configuration, use something like this
+#config_eth0="192.168.0.2/24"
+
+# If you need more than one address, you can use something like this
+# NOTE: ifconfig creates an aliased device for each extra IPv4 address
+#       (eth0:1, eth0:2, etc)
+#       iproute2 does not do this as there is no need to
+#config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
+
+# You can also use IPv6 addresses
+# (you should always specify a prefix length with IPv6 here)
+#config_eth0="192.168.0.2/24 4321:0:1:2:3:4:567:89ab/64 4321:0:1:2:3:4:567:89ac/64"
+
+# If you wish to keep existing addresses + routing and the interface is up,
+# you can specify a noop (no operation). If the interface is down or there
+# are no addresses assigned, then we move onto the next step (default dhcp)
+# This is useful when configuring your interface with a kernel command line
+# or similar
+#config_eth0="noop 192.168.0.2/24"
+
+# If you don't want ANY address (only useful when calling for advanced stuff)
+#config_eth0="null"
+
+# Here's how to do routing if you need it
+# We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route
+#routes_eth0="default via 192.168.0.1
+#10.0.0.0/8 via 192.168.0.1
+#::/0"
+
+# If a specified module fails (like dhcp - see below), you can specify a
+# fallback like so
+#fallback_eth0="192.168.0.2 netmask 255.255.255.0"
+#fallback_routes_eth0="default via 192.168.0.1"
+
+# NOTE: fallback entry must match the entry location in config_eth0
+# As such you can only have one fallback route.
+# Also, if you do not set a fallback_routes entry for an interface, the
+# routes entry will be used if that is set.
+
+# Some users may need to alter the MTU - here's how
+#mtu_eth0="1500"
+
+# Most drivers that report carrier status function correctly, but some do not
+# One of these faulty drivers is for the Intel e1000 network card, but only
+# at boot time. To get around this you may alter the carrier_timeout value for
+# the interface. 0 is disable and any other number of seconds is how
+# long we wait for carrier. The current default is disabled.
+#carrier_timeout_eth0=0
+
+# You may wish to disable the interface being brought down when stopping.
+# This is only of use for WakeOnLan.
+#ifdown_eth0="NO"
+
+##############################################################################
+# OPTIONAL MODULES
+
+#-----------------------------------------------------------------------------
+# WIRELESS (802.11 support)
+# Wireless can be provided by BSDs ifconfig (iwconfig) or wpa_supplicant
+# wpa_supplicant is preferred, use the modules directive to prefer iwconfig.
+#modules="iwconfig"
+
+# ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
+# that scans, associates and re-configures if association is lost.
+# We call it iwconfig to separate the wireless setup from ifconfig.
+####################################
+# HINTS
+#
+# Most users will just need to set the following options
+# key_SSID1="s:yourkeyhere enc open" # s: means a text key
+# key_SSID2="aaaa-bbbb-cccc-dd"      # no s: means a hex key
+# preferred_aps="SSID1 SSID2"
+#
+# Clear? Good. Now configure your wireless network below
+
+####################################
+# SETTINGS
+# Hard code an SSID to an interface - leave this unset if you wish the driver
+# to scan for available Access Points
+# I would only set this as a last resort really - use the preferred_aps
+# setting at the bottom of this file
+#essid_eth0='foo'
+
+# Some drivers/hardware don't scan all that well. We have no control over this
+# but we can say how many scans we want to do to try and get a better sweep of
+# the area. The default is 1.
+#scans_eth0="1"
+
+#Channel can be set (1-14), but defaults to 3 if not set.
+#
+# The below is taken verbatim from the BSD wavelan documentation found at
+# http://www.netbsd.org/Documentation/network/wavelan.html
+# There are 14 channels possible; We are told that channels 1-11 are legal for
+# North America, channels 1-13 for most of Europe, channels 10-13 for France,
+# and only channel 14 for Japan. If in doubt, please refer to the documentation
+# that came with your card or access point. Make sure that the channel you
+# select is the same channel your access point (or the other card in an ad-hoc
+# network) is on. The default for cards sold in North America and most of Europe
+# is 3; the default for cards sold in France is 11, and the default for cards
+# sold in Japan is 14.
+#channel_eth0="3"
+
+# Setup any other config commands. This is basically the ifconfig argument
+# without the ifconfig $iface.
+#ifconfig_eth0=""
+# You can do the same per SSID too.
+#ifconfig_SSID=""
+
+# Seconds to wait until associated. The default is to wait 10 seconds.
+# 0 means wait indefinitely. WARNING: this can cause an infinite delay when
+# booting.
+#associate_timeout_eth0="5"
+
+# Define a WEP key per SSID or MAC address (of the AP, not your card)
+# The encryption type (open or restricted) must match the
+# encryption type on the Access Point.
+# To set a hex key, prefix with 0x
+#key_SSID="0x12341234123412341234123456"
+# or you can use strings. Passphrase IS NOT supported
+#key_SSID="foobar"
+#key_SSID="foobar"
+
+# WEP key for the AP with MAC address 001122334455
+#mac_key_001122334455="foobar"
+
+# You can also override the interface settings found in /etc/conf.d/net
+# per SSID - which is very handy if you use different networks a lot
+#config_SSID="dhcp"
+#routes_SSID=
+#fallback_SSID=
+
+# Setting name/domain server causes /etc/resolv.conf to be overwritten
+# Note that if DHCP is used, and you want this to take precedence then
+# please put -R in your dhcpcd options
+#dns_servers_SSID="192.168.0.1 192.168.0.2"
+#dns_domain_SSID="some.domain"
+#dns_search_SSID="search.this.domain search.that.domain"
+# Please check the man page for resolv.conf for more information
+# as domain and search (searchdomains) are mutually exclusive and
+# searchdomains takes precedence
+
+# You can also set any of the /etc/conf.d/net variables per MAC address
+# incase you use Access Points with the same SSID but need different
+# networking configs. Below is an example - of course you use the same
+# method with other variables
+#config_001122334455="dhcp"
+#dns_servers_001122334455="192.168.0.1 192.168.0.2"
+
+# Map a MAC address to an SSID
+# This is used when the Access Point is not broadcasting its SSID
+# WARNING: This will override the SSID being broadcast due to some
+# Access Points sending an SSID even when they have been configured
+# not to!
+# Change 001122334455 to the MAC address and SSID to the SSID
+# it should map to
+#mac_essid_001122334455="SSID"
+
+# This lists the preferred SSIDs to connect to in order
+# SSID's can contain any characters here as they must match the broadcast
+# SSID exactly.
+# Surround each SSID with the " character and separate them with a space
+# If the first SSID isn't found then it moves onto the next
+# If this isn't defined then it connects to the first one found
+#preferred_aps="SSID1 SSID2"
+
+# You can also define a preferred_aps list per interface
+#preferred_aps_eth0="SSID3 SSID4"
+
+# You can also say whether we only connect to preferred APs or not
+# Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly"
+# and "forceany"
+# "any" means it will connect to visible APs in the preferred list and then
+# any other available AP
+# "preferredonly" means it will only connect to visible APs in the preferred
+# list
+# "forcepreferred" means it will forcibly connect to APs in order if it does
+# not find them in a scan
+# "forcepreferredonly" means it forcibly connects to the APs in order and
+# does not bother to scan
+# "forceany" does the same as forcepreferred + connects to any other
+# available AP
+# Default is "any"
+#associate_order="any"
+#associate_order_eth0="any"
+
+# You can define blacklisted Access Points in the same way
+#blacklist_aps="SSID1 SSID2"
+#blacklist_aps_eth0="SSID3 SSID4"
+
+# If you have more than one wireless card, you can say if you want
+# to allow each card to associate with the same Access Point or not
+# Values are "yes" and "no"
+# Default is "yes"
+#unique_ap="yes"
+#unique_ap_eth0="yes"
+
+# IMPORTANT: preferred_only, blacklisted_aps and unique_ap only work when
+# essid_eth0 is not set and your card is capable of scanning
+
+# NOTE: preferred_aps  list ignores blacklisted_aps - so if you have
+# the same SSID in both, well, you're a bit silly :p
+
+##################################################
+# wpa_supplicant
+# emerge net-wireless/wpa_supplicant
+# Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
+# Consult the wpa_supplicant.conf.example that is installed in
+# /usr/share/doc/wpa_supplicant
+
+# By default we don't wait for wpa_supplicant to associate and authenticate.
+# If you would like to, so can specify how long in seconds
+#associate_timeout_eth0=60
+# A value of 0 means wait forever.
+
+# You can also override any settings found here per SSID - which is very
+# handy if you use different networks a lot. See below for using the SSID
+# in our variables
+#config_SSID="dhcp"
+# See the System module below for setting dns/nis/ntp per SSID
+
+# You can also override any settings found here per MAC address of the AP
+# in case you use Access Points with the same SSID but need different
+# networking configs. Below is an example - of course you use the same
+# method with other variables
+#mac_config_001122334455="dhcp"
+#mac_dns_servers_001122334455="192.168.0.1 192.168.0.2"
+
+# When an interface has been associated with an Access Point, a global
+# variable called SSID is set to the Access Point's SSID for use in the
+# pre/post user functions below (although it's not available in preup as you
+# won't have associated then)
+
+# If you're using anything else to configure wireless on your interface AND
+# you have installed wpa_supplicant, you need to disable wpa_supplicant
+#modules="!iwconfig !wpa_supplicant"
+#or
+#modules="!wireless"
+
+##############################################################################
+# WIRELESS SSID IN VARIABLES
+##############################################################################
+# Remember to change SSID to your SSID.
+# Say that your SSID is My NET - the line
+#      #key_SSID="s:passkey"
+# becomes
+#      #key_My_NET="s:passkey"
+# Notice that the space has changed to an underscore - do the same with all
+# characters not in a-z A-Z (English alphabet) 0-9. This only applies to
+# variables and not values.
+#
+# Any SSID's in values like essid_eth0="My NET" may need to be escaped
+# This means placing the character \ before the character
+# \" need to be escaped for example
+# So if your SSID is
+#      My "\ NET
+# it becomes
+#      My \"\\ NET
+# for example
+#      #essid_eth0="My\"\\NET"
+#
+# So using the above we can use
+#      #dns_domain_My____NET="My\"\\NET"
+# which is an invalid dns domain, but shows the how to use the variable
+# structure
+#########################################################
+
+#-----------------------------------------------------------------------------
+# DHCP
+# DHCP can be provided by dhclient.
+#
+# dhcpcd:   emerge net-misc/dhcpcd
+# dhclient: emerge net-misc/dhcp
+
+# Regardless of which DHCP client you prefer, you configure them the
+# same way using one of following depending on which interface modules
+# you're using.
+#config_eth0="dhcp"
+
+# For passing custom options to dhcpcd use something like the following.  This
+# example reduces the timeout for retrieving an address from 60 seconds (the
+# default) to 10 seconds.
+#dhcpcd_eth0="-t 10"
+
+# GENERIC DHCP OPTIONS
+# Set generic DHCP options like so
+#dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
+
+# This tells the dhcp client to release its lease when it stops, not to
+# overwrite dns, ntp and nis settings, not to set a default route and not to
+# send the current hostname to the dhcp server and when it starts.
+# You can use any combination of the above options - the default is not to
+# use any of them.
+
+
+#-----------------------------------------------------------------------------
+# System
+# For configuring system specifics such as domain, dns, ntp and nis servers
+# It's rare that you would need todo this, but you can anyway.
+# This is most benefit to wireless users who don't use DHCP so they can change
+# their configs based on SSID.
+
+# If you omit the _eth0 suffix, then it applies to all interfaces unless
+# overridden by the interface suffix.
+#dns_domain_eth0="your.domain"
+#dns_servers_eth0="192.168.0.2 192.168.0.3"
+#dns_search_eth0="this.domain that.domain"
+#dns_options_eth0="timeout:1 rotate"
+#dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0"
+# See the man page for resolv.conf for details about the options and sortlist
+# directives
+
+#ntp_servers_eth0="192.168.0.2 192.168.0.3"
+
+#nis_domain_eth0="domain"
+#nis_servers_eth0="192.168.0.2 192.168.0.3"
+
+# NOTE: Setting any of these will stamp on the files in question. So if you
+# don't specify dns_servers but you do specify dns_domain then no nameservers
+# will be listed in /etc/resolv.conf even if there were any there to start
+# with.
+# If this is an issue for you then maybe you should look into a resolv.conf
+# manager like resolvconf-gentoo to manage this file for you. All packages
+# that baselayout supports use resolvconf-gentoo if installed.
+
+#-----------------------------------------------------------------------------
+# Cable in/out detection
+# Sometimes the cable is in, others it's out. Obviously you don't want to
+# restart net.eth0 every time when you plug it in either.
+# BSD has the Device State Change Daemon - or devd for short
+# To enable this,  simple add devd to the boot runlevel
+#rc-update add devd boot
+#rc
+
+##############################################################################
+# ADVANCED CONFIGURATION
+#
+# Four functions can be defined which will be called surrounding the
+# start/stop operations.  The functions are called with the interface
+# name first so that one function can control multiple adapters. An extra two
+# functions can be defined when an interface fails to start or stop.
+#
+# The return values for the preup and predown functions should be 0
+# (success) to indicate that configuration or deconfiguration of the
+# interface can continue.  If preup returns a non-zero value, then
+# interface configuration will be aborted.  If predown returns a
+# non-zero value, then the interface will not be allowed to continue
+# deconfiguration.
+#
+# The return values for the postup, postdown, failup and faildown functions are
+# ignored since there's nothing to do if they indicate failure.
+#
+# ${IFACE} is set to the interface being brought up/down
+# ${IFVAR} is ${IFACE} converted to variable name bash allows
+#
+# For historical and compatibility reasons, preup is actually normally called
+# in the following sequence: up ; preup ; up.
+# The first up causes the kernel to initialize the device, so
+# that it is available for use in the preup function.  However, for some
+# hardware, e.g. CAN devices, some configuration is needed before trying to up
+# the interface will actually work. For such hardware, the
+# up_before_preup variables will allow skipping the first up call if set
+# to yes.
+#up_before_preup_IFVAR="NO"
+#up_before_preup="NO"
+
+#preup() {
+#	# Remember to return 0 on success
+#	return 0
+#}
+
+#predown() {
+#	# The default in the script is to test for NFS root and disallow
+#	# downing interfaces in that case.  Note that if you specify a
+#	# predown() function you will override that logic.  Here it is, in
+#	# case you still want it...
+#	if is_net_fs /; then
+#		eerror "root filesystem is network mounted -- can't stop ${IFACE}"
+#		return 1
+#	fi
+#
+#	# Remember to return 0 on success
+#	return 0
+#}
+
+#postup() {
+#	# This function could be used, for example, to register with a
+#	# dynamic DNS service.  Another possibility would be to
+#	# send/receive mail once the interface is brought up.
+
+#}
+
+#postdown() {
+#	# Return 0 always
+#	return 0
+#}
+
+#failup() {
+#       # This function is mostly here for completeness... I haven't
+#       # thought of anything nifty to do with it yet ;-)
+#}
+
+#faildown() {
+#       # This function is mostly here for completeness... I haven't
+#       # thought of anything nifty to do with it yet ;-)
+#}

etc/.gitignore

@@ -1,2 +1,3 @@
+rc.conf
 rc
 rc.shutdown

etc/Makefile

@@ -1,8 +1,10 @@
 DIR=	${SYSCONFDIR}
-SRCS=	rc.in rc.shutdown.in
+SRCS=	rc.conf.in rc.in rc.shutdown.in
 BIN=	${BIN-${OS}}
 CONF=	rc.conf ${BIN-${OS}}
 
+CLEANFILES+=	rc.conf
+
 MK=	../mk
 include ${MK}/os.mk
 
@@ -21,3 +23,6 @@ CONF-NetBSD=
 SED_EXTRA=	${SED_EXTRA-${OS}}
 
 include ${MK}/scripts.mk
+
+rc.conf: rc.conf.in rc.conf.${OS}
+	${SED} ${SED_REPLACE} ${SED_EXTRA} $^ > $@

etc/rc.conf

@@ -1,314 +0,0 @@
-# Global OpenRC configuration settings
-
-# Set to "YES" if you want the rc system to try and start services
-# in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with its name as the output will get
-# jumbled up.
-# WARNING: whilst we have improved parallel, it can still potentially lock
-# the boot process. Don't file bugs about this unless you can supply
-# patches that fix it without breaking other things!
-#rc_parallel="NO"
-
-# Set rc_interactive to "YES" and you'll be able to press the I key during
-# boot so you can choose to start specific services. Set to "NO" to disable
-# this feature. This feature is automatically disabled if rc_parallel is
-# set to YES.
-#rc_interactive="YES"
-
-# If we need to drop to a shell, you can specify it here.
-# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
-# otherwise /bin/sh
-# Linux users could specify /sbin/sulogin
-#rc_shell=/bin/sh
-
-# Do we allow any started service in the runlevel to satisfy the dependency
-# or do we want all of them regardless of state? For example, if net.eth0
-# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
-# both will be started, but services that depend on 'net' will work if either
-# one comes up. With rc_depend_strict="YES" we would require them both to
-# come up.
-#rc_depend_strict="YES"
-
-# rc_hotplug controls which services we allow to be hotplugged.
-# A hotplugged service is one started by a dynamic dev manager when a matching
-# hardware device is found.
-# Hotplugged services appear in the "hotplugged" runlevel.
-# If rc_hotplug is set to any value, we compare the name of this service
-# to every pattern in the value, from left to right, and we allow the
-# service to be hotplugged if it matches a pattern, or if it matches no
-# patterns. Patterns can include shell wildcards.
-# To disable services from being hotplugged, prefix patterns with "!".
-#If rc_hotplug is not set or is empty, all hotplugging is disabled.
-# Example - rc_hotplug="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be hotplugged.
-# Example - rc_hotplug="!net.*"
-# This allows services that do not match "net.*" to be hotplugged.
-
-# rc_logger launches a logging daemon to log the entire rc process to
-# /var/log/rc.log
-# NOTE: Linux systems require the devfs service to be started before
-# logging can take place and as such cannot log the sysinit runlevel.
-#rc_logger="NO"
-
-# Through rc_log_path you can specify a custom log file.
-# The default value is: /var/log/rc.log
-#rc_log_path="/var/log/rc.log"
-
-# If you want verbose output for OpenRC, set this to yes. If you want
-# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
-#rc_verbose=no
-
-# By default we filter the environment for our running scripts. To allow other
-# variables through, add them here. Use a * to allow all variables through.
-#rc_env_allow="VAR1 VAR2"
-
-# By default we assume that all daemons will start correctly.
-# However, some do not - a classic example is that they fork and return 0 AND
-# then child barfs on a configuration error. Or the daemon has a bug and the
-# child crashes. You can set the number of milliseconds start-stop-daemon
-# waits to check that the daemon is still running after starting here.
-# The default is 0 - no checking.
-#rc_start_wait=100
-
-# rc_nostop is a list of services which will not stop when changing runlevels.
-# This still allows the service itself to be stopped when called directly.
-#rc_nostop=""
-
-# rc will attempt to start crashed services by default.
-# However, it will not stop them by default as that could bring down other
-# critical services.
-#rc_crashed_stop=NO
-#rc_crashed_start=YES
-
-# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
-# output.
-#rc_nocolor=NO
-
-##############################################################################
-# MISC CONFIGURATION VARIABLES
-# There variables are shared between many init scripts
-
-# Set unicode to YES to turn on unicode support for keyboards and screens.
-#unicode="NO"
-
-# This is how long fuser should wait for a remote server to respond. The
-# default is 60 seconds, but  it can be adjusted here.
-#rc_fuser_timeout=60
-
-# Below is the default list of network fstypes.
-#
-# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
-# nfs nfs4 ocfs2 shfs smbfs
-#
-# If you would like to add to this list, you can do so by adding your
-# own fstypes to the following variable.
-#extra_net_fs_list=""
-
-##############################################################################
-# SERVICE CONFIGURATION VARIABLES
-# These variables are documented here, but should be configured in
-# /etc/conf.d/foo for service foo and NOT enabled here unless you
-# really want them to work on a global basis.
-# If your service has characters in its name which are not legal in
-# shell variable names and you configure the variables for it in this
-# file, those characters should be replaced with underscores in the
-# variable names as shown below.
-
-# Some daemons are started and stopped via start-stop-daemon.
-# We can set some things on a per service basis, like the nicelevel.
-#SSD_NICELEVEL="-19"
-# Or the ionice level. The format is class[:data] , just like the
-# --ionice start-stop-daemon parameter.
-#SSD_IONICELEVEL="2:2"
-
-# Pass ulimit parameters
-# If you are using bash in POSIX mode for your shell, note that the
-# ulimit command uses a block size of 512 bytes for the -c and -f
-# options
-#rc_ulimit="-u 30"
-
-# It's possible to define extra dependencies for services like so
-#rc_config="/etc/foo"
-#rc_need="openvpn"
-#rc_use="net.eth0"
-#rc_after="clock"
-#rc_before="local"
-#rc_provide="!net"
-
-# You can also enable the above commands here for each service. Below is an
-# example for service foo.
-#rc_foo_config="/etc/foo"
-#rc_foo_need="openvpn"
-#rc_foo_after="clock"
-
-# Below is an example for service foo-bar. Note that the '-' is illegal
-# in a shell variable name, so we convert it to an underscore.
-# example for service foo-bar.
-#rc_foo_bar_config="/etc/foo-bar"
-#rc_foo_bar_need="openvpn"
-#rc_foo_bar_after="clock"
-
-# You can also remove dependencies.
-# This is mainly used for saying which services do NOT provide net.
-#rc_net_tap0_provide="!net"
-
-# This is the subsystem type.
-# It is used to match against keywords set by the keyword call in the
-# depend function of service scripts.
-#
-# It should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-# If it is commented out, automatic detection will be used.
-#
-# The list below shows all possible settings as well as the host
-# operating systems where they can be used and autodetected.
-#
-# ""               - nothing special
-# "docker"         - Docker container manager (Linux)
-# "jail"           - Jail (DragonflyBSD or FreeBSD)
-# "lxc"            - Linux Containers
-# "openvz"         - Linux OpenVZ
-# "prefix"         - Prefix
-# "rkt"            - CoreOS container management system (Linux)
-# "subhurd"        - Hurd subhurds (to be checked)
-# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
-# "uml"            - Usermode Linux
-# "vserver"        - Linux vserver
-# "xen0"           - Xen0 Domain (Linux and NetBSD)
-# "xenU"           - XenU Domain (Linux and NetBSD)
-#rc_sys=""
-
-# if  you use openrc-init, which is currently only available on Linux,
-# this is the default runlevel to activate after "sysinit" and "boot"
-# when booting.
-#rc_default_runlevel="default"
-
-# on Linux and Hurd, this is the number of ttys allocated for logins
-# It is used in the consolefont, keymaps, numlock and termencoding
-# service scripts.
-rc_tty_number=12
-
-##############################################################################
-# LINUX CGROUPS RESOURCE MANAGEMENT
-
-# This sets the mode used to mount cgroups.
-# "hybrid" mounts cgroups version 2 on /sys/fs/cgroup/unified and
-# cgroups version 1 on /sys/fs/cgroup.
-# "legacy" mounts cgroups version 1 on /sys/fs/cgroup
-# "unified" mounts cgroups version 2 on /sys/fs/cgroup
-#rc_cgroup_mode="hybrid"
-
-# This is a list of controllers which should be enabled for cgroups version 2.
-# If hybrid mode is being used, controllers listed here will not be
-# available for cgroups version 1.
-# This is a global setting.
-#rc_cgroup_controllers=""
-
-# This variable contains the cgroups version 2 settings for your services.
-# If this is set in this file, the settings will apply to all services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the setting and value followed by a newline.
-# Multiple settings and values can be specified.
-# For example, you would use this to set the maximum memory and maximum
-# number of pids for a service.
-#rc_cgroup_settings="
-#memory.max 10485760
-#pids.max max
-#"
-#
-# For more information about the adjustments that can be made with
-# cgroups version 2, see Documentation/cgroups-v2.txt in the linux kernel
-# source tree.
-#rc_cgroup_settings=""
-
-# This switch controls whether or not cgroups version 1 controllers are
-# individually mounted under
-# /sys/fs/cgroup in hybrid or legacy mode.
-#rc_controller_cgroups="YES"
-
-# The following setting turns on the memory.use_hierarchy setting in the
-# root memory cgroup for cgroups v1.
-# It must be set to yes in this file if you want this functionality.
-#rc_cgroup_memory_use_hierarchy="NO"
-
-# The following settings allow you to set up values for the cgroups version 1
-# controllers for your services.
-# They can be set in this file;, however, if you do this, the settings
-# will apply to all of your services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the names of the settings followed by their
-# values. Each variable can hold multiple settings.
-# For example, you would use this to set the cpu.shares setting in the
-# cpu controller to 512 for your service.
-# rc_cgroup_cpu="
-# cpu.shares 512
-# "
-#
-# For more information about the adjustments that can be made with
-# cgroups version 1, see Documentation/cgroups-v1/* in the linux kernel
-# source tree.
-
-# Set the blkio controller settings for this service.
-#rc_cgroup_blkio=""
-
-# Set the cpu controller settings for this service.
-#rc_cgroup_cpu=""
-
-# Add this service to the cpuacct controller (any value means yes).
-#rc_cgroup_cpuacct=""
-
-# Set the cpuset controller settings for this service.
-#rc_cgroup_cpuset=""
-
-# Set the devices controller settings for this service.
-#rc_cgroup_devices=""
-
-# Set the hugetlb controller settings for this service.
-#rc_cgroup_hugetlb=""
-
-# Set the memory controller settings for this service.
-#rc_cgroup_memory=""
-
-# Set the net_cls controller settings for this service.
-#rc_cgroup_net_cls=""
-
-# Set the net_prio controller settings for this service.
-#rc_cgroup_net_prio=""
-
-# Set the pids controller settings for this service.
-#rc_cgroup_pids=""
-
-# Set this to YES if you want all of the processes in a service's cgroup
-# killed when the service is stopped or restarted.
-# Be aware that setting this to yes means all of a service's
-# child processes will be killed. Keep this in mind if you set this to
-# yes here instead of for the individual services in
-# /etc/conf.d/<service>.
-# To perform this cleanup manually for a stopped service, you can
-# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
-# rc-service <service> cgroup_cleanup.
-# The process followed in this cleanup is the following:
-# 1. send stopsig (sigterm if it isn't set) to all processes left in the
-# cgroup immediately followed by sigcont.
-# 2. Send sighup to all processes in the cgroup if rc_send_sighup is
-# yes.
-# 3. delay for rc_timeout_stopsec seconds.
-# 4. send sigkill to all processes in the cgroup unless disabled by
-# setting rc_send_sigkill to no.
-# rc_cgroup_cleanup="NO"
-
-# If this is yes, we will send sighup to the processes in the cgroup
-# immediately after stopsig and sigcont.
-#rc_send_sighup="NO"
-
-# This is the amount of time in seconds that we delay after sending sigcont
-# and optionally sighup, before we optionally send sigkill to all
-# processes in the # cgroup.
-# The default is 90 seconds.
-#rc_timeout_stopsec="90"
-
-# If this is set to no, we do not send sigkill to all processes in the
-# cgroup.
-#rc_send_sigkill="YES"

etc/rc.conf.FreeBSD

@@ -0,0 +1,13 @@
+##############################################################################
+# FreeBSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on FreeBSD:
+# ""        - nothing special
+# "jail"    - FreeBSD jails
+# "prefix"  - Prefix
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+

etc/rc.conf.Linux

@@ -0,0 +1,29 @@
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on Linux:
+# ""        - nothing special
+# "lxc"     - Linux Containers
+# "openvz"  - Linux OpenVZ
+# "prefix"  - Prefix
+# "uml"     - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0"    - Xen0 Domain
+# "xenU"    - XenU Domain
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controler is mounted under
+# /sys/fs/cgroup.
+# Support for process management by cgroups is planned in the future,
+# so if you turn this off, be aware that you may not be able to use that
+# feature.
+#rc_controller_cgroups="YES"

etc/rc.conf.NetBSD

@@ -0,0 +1,14 @@
+##############################################################################
+# NetBSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on NetBSD:
+# ""        - nothing special
+# "prefix"  - Prefix
+# "xen0"    - Xen0 Domain
+# "xenU"    - XenU Domain
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+

etc/rc.conf.in

@@ -0,0 +1,133 @@
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+#rc_shell=/bin/sh
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+#rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+#unicode="NO"
+
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#export SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which servies do NOT provide net.
+#rc_net_tap0_provide="!net"
+

etc/rc.devd

@@ -1,18 +1,10 @@
 #!/bin/sh
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged
-IN_BACKGROUND=yes
-IN_HOTPLUG=yes
-export IN_BACKGROUND IN_HOTPLUG
+export IN_BACKGROUND=yes
+export IN_HOTPLUG=yes
 
 getmedia() {
 	ifconfig "$1" | while read line; do

etc/rc.in

@@ -1,25 +1,18 @@
-#!/bin/sh
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
+#!@SHELL@
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
+[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
 
 # Handle interrupts
 trap : SIGINT
 trap "echo 'Boot interrupted'; exit 1" SIGQUIT
 
-/sbin/openrc sysinit || exit 1
-/sbin/openrc boot || exit 1
-/sbin/openrc default
+/sbin/rc sysinit || exit 1
+/sbin/rc boot || exit 1
+/sbin/rc default
 
 # We don't actually care if rc default worked or not, we should exit 0
 # to allow logins

etc/rc.shutdown.in

@@ -1,24 +1,17 @@
-#!/bin/sh
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
+#!@SHELL@
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 # Handle interrupts
 trap : SIGINT SIGQUIT
 
 # Try and use stuff in /lib over anywhere else so we can shutdown
 # local mounts correctly.
-LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LD_LIBRARY_PATH}" ; export LD_LIBRARY_PATH
+export LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}"
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
+[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
 
 action=${1:-shutdown}
-exec /sbin/openrc "${action}"
+exec /sbin/rc "${action}"

init-guide.md

@@ -1,50 +0,0 @@
-# OpenRC init process guide
-
-OpenRC now includes an init process which can be used on Linux systems
-in place of sysvinit.
-
-## migrating a live system to openrc-init
-
-Configuring a live system to use this init process is very
-straight-forward, but the steps must be completed in this order.
-
-* have your boot loader add "init=/sbin/openrc-init" to the kernel command line
-
-The details of how to do this will vary from distro to distro, so they are
-out of scope for this document.
-
-* Install gettys into the runlevels where you need them.
-
-If you are using the provided /etc/init.d/agetty script,, you should
-first create symlinks in /etc/init.d to it for the ports where you
-want gettys to run, e.g. the following will work if you want gettys on
-tty1-tty6.
-
-```
-# cd /etc/init.d
-# for x in tty1 tty2 tty3 tty4 tty5 tty6; do
-  ln -snf agetty agetty.$x
-  done
-```
-
-Once this is done, use ```rc-update``` as normal to install the agetty
-services in the appropriate runlevels.
-
-* Reboot your system.
-
-At this point you are running under openrc-init, and you should use
-openrc-shutdown to handle shutting down, powering off, rebooting etc.
-
-## optional sysvinit compatibility
-
-If you build and install OpenRC with MKSYSVINIT=yes, you will build and install
-wrappers that make openrc-init compatible with sysvinit -- you will have
-commands like "halt" "shutdown" "reboot" and "poweroff".
-
-If you want this functionality on a live system, you should first
-migrate the system to openrc-init, remove sysvinit, then rebuild and
-install this package with MKSYSVINIT=yes.
-
-package.
-migrating your system to openrc-init.
-

init.d.misc/Makefile

@@ -1,11 +1,11 @@
-DIR=	${DATADIR}/support/init.d.examples
-INC=	README.md
+DIR=	${INITDIR}
 SRCS=	avahi-dnsconfd.in avahid.in dhcpcd.in dbus.in \
 	hald.in named.in ntpd.in \
 	openvpn.in polkitd.in sshd.in wpa_supplicant.in
-BIN=	${OBJS}
 
-MK=	../../mk
+MK=	../mk
+
+SED_EXTRA+= -e 's:@VARBASE@:/var:g'
 
 include ${MK}/os.mk
 include ${MK}/scripts.mk

init.d.misc/avahi-dnsconfd.in

@@ -0,0 +1,15 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/sbin/avahi-dnsconfd
+command_args="$avahi_dnsconfd_args -D"
+pidfile=@VARBASE@/run/avahi-dnsconfd.pid
+name="Avahi DNS Configuration Daemon"
+
+depend()
+{
+	use dns
+	need localmount dbus
+	after bootmisc
+}

init.d.misc/avahid.in

@@ -0,0 +1,15 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/sbin/avahi-daemon
+command_args="$avahid_args -D"
+pidfile=@VARBASE@/run/avahi-daemon/pid
+name="Avahi Service Advertisement Daemon"
+
+depend()
+{
+	use dns
+	need localmount dbus
+	after bootmisc
+}

init.d.misc/dbus.in

@@ -0,0 +1,19 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/bin/dbus-daemon
+pidfile=@VARBASE@/run/dbus/pid
+command_args="${dbusd_args---system}"
+name="Message Bus Daemon"
+
+depend()
+{
+	need localmount net
+	after bootmisc
+}
+
+start_pre()
+{
+	mkdir -p $(dirname $pidfile)
+}

init.d.misc/dhcpcd.in

@@ -0,0 +1,27 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+command=/sbin/dhcpcd
+pidfile=/var/run/dhcpcd.pid
+command_args=-q
+name="DHCP Client Daemon"
+
+depend()
+{
+	provide net
+	need localmount
+	use logger
+	after bootmisc modules
+	before dns
+}
+
+stop_pre()
+{
+	# When shutting down, kill dhcpcd but preserve network
+	# We do this as /var/run/dhcpcd could be cleaned out when we
+	# return to multiuser.
+	if yesno $RC_GOINGDOWN; then
+		: ${stopsig:=SIGKILL}
+	fi
+}

init.d.misc/dnsmasq.in

@@ -0,0 +1,24 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/sbin/dnsmasq
+command_args=$dnsmasq_args
+pidfile=@VARBASE@/run/dnsmasq.pid
+required_files=/etc/dnsmasq.conf
+
+extra_started_commands="reload"
+
+depend()
+{
+	provide dns
+	need localmount net
+	after bootmisc
+}
+
+reload()
+{
+	ebegin "Reloading $RC_SVCNAME"
+	start-stop-daemon --signal SIGHUP --pidfile "$pidfile"
+	eend $?
+}

init.d.misc/hald.in

@@ -0,0 +1,13 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/sbin/hald
+pidfile=@VARBASE@/run/hald/hald.pid
+command_args=$hald_args
+name="Hardware Abstraction Layer Daemon"
+
+depend()
+{
+	need dbus
+}

init.d.misc/named.in

@@ -1,17 +1,10 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/named
 command_args=$named_args
-pidfile=/var/run/named.pid
+pidfile=@VARBASE@/run/named.pid
 name="Domain Name server"
 extra_started_commands="reload"
 
@@ -20,7 +13,7 @@ uid=named
 case "$RC_UNAME" in
 	FreeBSD)
 		uid=bind
-		pidfile=/var/run/named/pid
+		pidfile=@VARBASE@/run/named/pid
 		;;
 	Linux)
 		uid=bind

init.d.misc/ntpd.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 : ${ntpd_config:=/etc/ntp.conf}
 : ${ntpd_drift:=/var/db/ntpd.drift}

init.d.misc/openvpn.in

@@ -1,20 +1,13 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 vpn=${RC_SVCNAME#*.}
 name="OpenVPN"
 [ "$vpn" != openvpn ] && name="$name ($vpn)"
 command=@PKG_PREFIX@/sbin/openvpn
 
-pidfile=/var/run/"$RC_SVCNAME".pid
+pidfile=@VARBASE@/run/"$RC_SVCNAME".pid
 : ${openvpn_dir:=@PKG_PREFIX@/etc/openvpn}
 : ${openvpn_config:=$openvpn_dir/$vpn.conf}
 command_args="$openvpn_args --daemon --config $openvpn_config"
@@ -60,7 +53,7 @@ start_pre()
 			eend $?
 		fi
 	else
-		if command -v kldload >/dev/null 2>&1; then
+		if type kldload >/dev/null 2>&1; then
 			# Hammer the modules home by default
 			sysctl -a | grep -q '\.tun\.' || kldload if_tun
 			sysctl -a | grep -q '\.tap\.' || kldload if_tap

init.d.misc/polkitd.in

@@ -0,0 +1,13 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/sbin/polkitd
+pidfile=@VARBASE@/run/polkitd/polkitd.pid
+command_args="$polkitd_args"
+name="PolicyKit Daemon"
+
+depend()
+{
+	need dbus
+}

init.d.misc/sshd.in

@@ -1,17 +1,10 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/sshd
 command_args=$sshd_args
-pidfile=/var/run/sshd.pid
+pidfile=@VARBASE@/run/sshd.pid
 required_files=/etc/ssh/sshd_config
 
 depend()

init.d.misc/wpa_supplicant.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/wpa_supplicant
 : ${wpa_supplicant_conf:=/etc/wpa_supplicant.conf}
@@ -39,11 +32,6 @@ find_wireless()
 			fi
 		done
 		;;
-	FreeBSD)
-		for iface in $(sysctl -b net.wlan.devices 2>/dev/null); do
-			echo "${iface##*/}"
-		done
-		;;
 	*)
 		for iface in /dev/net/* $(ifconfig -l 2>/dev/null); do
 			if ifconfig "${iface##*/}" 2>/dev/null | \

init.d/.gitignore

@@ -1,19 +1,17 @@
-agetty
-binfmt
-cgroups
-modules-load
 bootmisc
 fsck
 hostname
 local
 localmount
-loopback
 moused
+net.lo
+net.lo0
 netmount
 network
 root
 savecache
 swap
+swapfiles
 sysctl
 urandom
 devfs
@@ -25,11 +23,8 @@ killprocs
 modules
 mount-ro
 mtab
-net-online
 numlock
-osclock
 procfs
-s6-svscan
 staticroute
 sysfs
 devdb
@@ -39,13 +34,11 @@ pf
 rarpd
 rc-enabled
 rpcbind
-runsvdir
 savecore
-save-keymaps
-save-termencoding
 swap-blk
 swclock
 syslogd
 termencoding
 ttys
 wscons
+tmpfiles.setup

init.d/Makefile

@@ -1,37 +1,48 @@
-include ../mk/net.mk
-
 DIR=	${INITDIR}
-SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
-	netmount.in osclock.in root.in savecache.in swap.in swclock.in \
-	sysctl.in runsvdir.in urandom.in s6-svscan.in ${SRCS-${OS}}
+SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
+	root.in savecache.in swap.in swapfiles.in \
+	tmpfiles.setup.in swclock.in sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
-# Are we installing our network scripts?
-ifeq (${MKNET},yes)
+# Build our old net foo or not
+ifeq (${MKNET},)
 SRCS+= network.in staticroute.in
 endif
 
+ifeq (${MKNET},oldnet)
+INSTALLAFTER=	_installafter_net.lo
+SRCS+= net.lo.in
+endif
+
 MK=	../mk
 include ${MK}/os.mk
 
+NET_LO-FreeBSD=	net.lo0
 # Generic BSD scripts
-SRCS-FreeBSD=	hostid.in modules.in moused.in newsyslog.in pf.in rarpd.in \
-		rc-enabled.in rpcbind.in savecore.in syslogd.in
+SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+		rpcbind.in savecore.in syslogd.in
 # These are FreeBSD specific
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
 		mixer.in nscd.in powerd.in syscons.in
 
-SRCS-Linux=	agetty.in binfmt.in devfs.in cgroups.in dmesg.in hwclock.in \
-	consolefont.in keymaps.in killprocs.in modules.in \
-	mount-ro.in mtab.in numlock.in procfs.in net-online.in save-keymaps.in \
-	save-termencoding.in sysfs.in termencoding.in
+NET_LO-Linux=	net.lo
+SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
+		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
+		procfs.in sysfs.in termencoding.in
 
+NET_LO-NetBSD=	net.lo0
 # Generic BSD scripts
 SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 		rpcbind.in savecore.in syslogd.in
 # These are NetBSD specific
 SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
 
+%.in: %${SFX}
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@
+
 include ${MK}/scripts.mk
 
 _installafter_: realinstall
+
+_installafter_net.lo: realinstall
+	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO-${OS}}

init.d/adjkerntz.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 extra_commands="save"
 
@@ -23,7 +16,6 @@ fi
 
 depend()
 {
-	after swclock
 	provide clock
 	# BSD adjkerntz needs to be able to write to /etc
 	if [ "$clock" = "UTC" -a -e /etc/wall_cmos_clock ] ||

init.d/agetty.in

@@ -1,41 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2017 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="start agetty on a terminal line"
-supervisor=supervise-daemon
-port="${RC_SVCNAME#*.}"
-respawn_period="${respawn_period:-60}"
-term_type="${term_type:-linux}"
-command=/sbin/agetty
-command_args_foreground="${agetty_options} ${port} ${baud} ${term_type}"
-pidfile="/run/${RC_SVCNAME}.pid"
-
-depend() {
-	after local
-	keyword -prefix
-	provide getty
-}
-
-start_pre() {
-	if [ -z "$port" ]; then
-		eerror "${RC_SVCNAME} cannot be started directly. You must create"
-		eerror "symbolic links to it for the ports you want to start"
-		eerror "agetty on and add those to the appropriate runlevels."
-		return 1
-	else
-		export EINFO_QUIET="${quiet:-yes}"
-	fi
-}
-
-stop_pre()
-{
-	export EINFO_QUIET="${quiet:-yes}"
-}

init.d/binfmt.in

@@ -1,27 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Register misc binary format handlers"
-
-depend()
-{
-	after clock procfs
-	use modules devfs
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	ebegin "Loading custom binary format handlers"
-	"$RC_LIBEXECDIR"/sh/binfmt.sh
-	eend $?
-	return 0
-}

init.d/bootmisc.in

@@ -1,19 +1,12 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 depend()
 {
 	need localmount
 	before logger
-	after clock root sysctl
+	after clock sysctl
 	keyword -prefix -timeout
 }
 
@@ -34,9 +27,9 @@ cleanup_tmp_dir()
 		ebegin "Wiping $dir directory"
 
 		# Faster than raw find
-		if ! rm -rf -- [!ajlq\.]* 2>/dev/null ; then
+		if ! rm -rf -- [^ajlq\.]* 2>/dev/null ; then
 			# Blah, too many files
-			find . -maxdepth 1 -name '[!ajlq\.]*' -exec rm -rf -- {} +
+			find . -maxdepth 1 -name '[^ajlq\.]*' -exec rm -rf -- {} +
 		fi
 
 		# pam_mktemp creates a .private directory within which
@@ -66,35 +59,6 @@ cleanup_tmp_dir()
 	fi
 }
 
-cleanup_var_run_dir()
-{
-	ebegin "Cleaning /var/run"
-	for x in $(find /var/run ! -type d ! -name utmp \
-		! -name random-seed ! -name dev.db \
-		! -name ld-elf.so.hints ! -name ld-elf32.so.hints \
-		! -name ld.so.hints);
-	do
-		# Clean stale sockets
-		if [ -S "$x" ]; then
-			if command -v fuser >/dev/null 2>&1; then
-				fuser "$x" >/dev/null 2>&1 || rm -- "$x"
-			else
-				rm -- "$x"
-			fi
-		fi
-		[ ! -f "$x" ] && continue
-		# Do not remove pidfiles of already running daemons
-		case "$x" in
-			*.pid)
-				start-stop-daemon --test --quiet \
-				--stop --pidfile "$x" && continue
-			;;
-		esac
-		rm -f -- "$x"
-	done
-	eend 0
-}
-
 mkutmp()
 {
 	: >"$1"
@@ -123,43 +87,10 @@ migrate_to_run()
  	fi
 }
 
-clean_run()
-{
-	[ "$RC_SYS" = VSERVER -o "$RC_SYS" = LXC ] && return 0
-	local dir
-	# If / is still read-only due to a problem, this will fail!
-	if ! checkpath -W /; then
-		ewarn "/ is not writable; unable to clean up underlying /run"
-		return 1
-	fi
-	if ! checkpath -W /tmp; then
-		ewarn "/tmp is not writable; unable to clean up underlying /run"
-		return 1
-	fi
-	# Now we know that we can modify /tmp and /
-	# if mktemp -d fails, it returns an EMPTY string
-	# STDERR: mktemp: failed to create directory via template ‘/tmp/tmp.XXXXXXXXXX’: Read-only file system
-	# STDOUT: ''
-	rc=0
-	dir=$(mktemp -d)
-	if [ -n "$dir" -a -d $dir -a -w $dir ]; then
-		mount --bind / $dir && rm -rf $dir/run/* || rc=1
-		umount $dir && rmdir $dir
-	else
-		rc=1
-	fi
-	if [ $rc -ne 0 ]; then
-		ewarn "Could not clean up underlying /run on /"
-		return 1
-	fi
-}
-
 start()
 {
 	# Remove any added console dirs
-	if checkpath -W "$RC_LIBEXECDIR"; then
-		rm -rf "$RC_LIBEXECDIR"/console/*
-	fi
+	rm -rf "$RC_LIBEXECDIR"/console/*
 
 	local logw=false runw=false extra=
 	# Ensure that our basic dirs exist
@@ -184,7 +115,6 @@ start()
 	if [ "$RC_UNAME" = Linux -a -d /run ]; then
 		migrate_to_run	/var/lock /run/lock
 		migrate_to_run	/var/run /run
-		clean_run
 	fi
 
 	if checkpath -W /var/run; then
@@ -197,13 +127,36 @@ start()
 		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
 		eend 0
 
-		mountinfo -q -f tmpfs /var/run || cleanup_var_run_dir
+		ebegin "Cleaning /var/run"
+		for x in $(find /var/run ! -type d ! -name utmp \
+			! -name random-seed ! -name dev.db \
+			! -name ld-elf.so.hints ! -name ld.so.hints);
+		do
+			# Clean stale sockets
+			if [ -S "$x" ]; then
+				if type fuser >/dev/null 2>&1; then
+					fuser "$x" >/dev/null 2>&1 || rm -- "$x"
+				else
+					rm -- "$x"
+				fi
+			fi
+			[ ! -f "$x" ] && continue
+			# Do not remove pidfiles of already running daemons
+			case "$x" in
+				*.pid)
+					start-stop-daemon --test --quiet \
+					--stop --pidfile "$x" && continue
+				;;
+			esac
+			rm -f -- "$x"
+		done
+		eend 0
 	fi
 
 	# Clean up /tmp directories
 	local tmp=
 	for tmp in ${clean_tmp_dirs:-${wipe_tmp_dirs-/tmp}}; do
-		mountinfo -q -f tmpfs "$tmp" || cleanup_tmp_dir "$tmp"
+		cleanup_tmp_dir "$tmp"
 	done
 
 	if checkpath -W /tmp; then
@@ -221,16 +174,10 @@ start()
 	if yesno $log_dmesg; then
 		if $logw || checkpath -W /var/log; then
 			# Create an 'after-boot' dmesg log
-			case "$RC_SYS" in
-				VSERVER|OPENVZ|LXC|SYSTEMD-NSPAWN) ;;
-				*)
-					if yesno ${previous_dmesg:-no}; then
-						mv /var/log/dmesg /var/log/dmesg.old
-					fi
-					dmesg > /var/log/dmesg
-					chmod 640 /var/log/dmesg
-					;;
-			esac
+			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
+				dmesg > /var/log/dmesg
+				chmod 640 /var/log/dmesg
+			fi
 		fi
 	fi
 
@@ -241,7 +188,7 @@ stop()
 {
 	# Write a halt record if we're shutting down
 	if [ "$RC_RUNLEVEL" = shutdown ]; then
-		[ "$RC_UNAME" = Linux ] && openrc-shutdown -w
+		[ "$RC_UNAME" = Linux ] && halt -w
 		if [ "$RC_SYS" = OPENVZ ]; then
 			yesno $RC_REBOOT && printf "" >/reboot
 		fi

init.d/cgroups.in

@@ -1,149 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2017 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Mount the control groups."
-
-cgroup_opts=nodev,noexec,nosuid
-
-depend()
-{
-	keyword -docker -prefix -systemd-nspawn -vserver
-	after sysfs
-}
-
-cgroup1_base()
-{
-	grep -qw cgroup /proc/filesystems || return 0
-	if ! mountinfo -q /sys/fs/cgroup; then
-		ebegin "Mounting cgroup filesystem"
-		local opts="${cgroup_opts},mode=755,size=${rc_cgroupsize:-10m}"
-		mount -n -t tmpfs -o "${opts}" cgroup_root /sys/fs/cgroup
-		eend $?
-	fi
-
-	if ! mountinfo -q /sys/fs/cgroup/openrc; then
-		local agent="${RC_LIBEXECDIR}/sh/cgroup-release-agent.sh"
-		mkdir /sys/fs/cgroup/openrc
-		mount -n -t cgroup \
-			-o none,${cgroup_opts},name=openrc,release_agent="$agent" \
-			openrc /sys/fs/cgroup/openrc
-		printf 1 > /sys/fs/cgroup/openrc/notify_on_release
-	fi
-	return 0
-}
-
-cgroup1_controllers()
-{
-	yesno "${rc_controller_cgroups:-YES}" && [ -e /proc/cgroups ]  &&
-	grep -qw cgroup /proc/filesystems || return 0
-	while read -r name _ _ enabled _; do
-		case "${enabled}" in
-			1)	mountinfo -q "/sys/fs/cgroup/${name}" && continue
-				local x
-				for x in $rc_cgroup_controllers; do
-				[ "${name}" = "blkio" ] && [ "${x}" = "io" ] &&
-					continue 2
-				[ "${name}" = "${x}" ] &&
-				continue 2
-				done
-				mkdir "/sys/fs/cgroup/${name}"
-				mount -n -t cgroup -o "${cgroup_opts},${name}" \
-					"${name}" "/sys/fs/cgroup/${name}"
-				yesno "${rc_cgroup_memory_use_hierarchy:-no}" &&
-					[ "${name}" = memory ] &&
-					echo 1 > /sys/fs/cgroup/memory/memory.use_hierarchy
-				;;
-		esac
-	done < /proc/cgroups
-	return 0
-}
-
-cgroup2_base()
-{
-	grep -qw cgroup2 /proc/filesystems || return 0
-	local base
-	base="$(cgroup2_find_path)"
-	mkdir -p "${base}"
-	mount -t cgroup2 none -o "${cgroup_opts},nsdelegate" "${base}" 2> /dev/null ||
-		mount -t cgroup2 none -o "${cgroup_opts}" "${base}"
-	return 0
-}
-
-cgroup2_controllers()
-{
-	grep -qw cgroup2 /proc/filesystems || return 0
-	local active cgroup_path x y
-	cgroup_path="$(cgroup2_find_path)"
-	[ -z "${cgroup_path}" ] && return 0
-	[ -e "${cgroup_path}/cgroup.controllers" ] &&
-	read -r active < "${cgroup_path}/cgroup.controllers"
-	for x in ${rc_cgroup_controllers}; do
-		for y in ${active}; do
-		[ "$x" = "$y" ] &&
-			[ -e "${cgroup_path}/cgroup.subtree_control" ]&&
-			echo "+${x}"  > "${cgroup_path}/cgroup.subtree_control"
-		done
-	done
-	return 0
-}
-
-cgroups_hybrid()
-{
-	cgroup1_base
-	cgroup2_base
-	cgroup2_controllers
-	cgroup1_controllers
-	return 0
-}
-
-cgroups_legacy()
-{
-	cgroup1_base
-	cgroup1_controllers
-	return 0
-}
-
-cgroups_unified()
-{
-	cgroup2_base
-	cgroup2_controllers
-	return 0
-}
-
-mount_cgroups()
-{
-	case "${rc_cgroup_mode:-hybrid}" in
-	hybrid) cgroups_hybrid ;;
-	legacy) cgroups_legacy ;;
-	unified) cgroups_unified ;;
-	esac
-	return 0
-}
-
-restorecon_cgroups()
-{
-	if [ -x /sbin/restorecon ]; then
-		ebegin "Restoring SELinux contexts in /sys/fs/cgroup"
-		restorecon -rF /sys/fs/cgroup >/dev/null 2>&1
-		eend $?
-	fi
-	return 0
-}
-
-start()
-{
-	# set up kernel support for cgroups
-	if [ -d /sys/fs/cgroup ]; then
-		mount_cgroups
-		restorecon_cgroups
-	fi
-	return 0
-}

init.d/consolefont.in

@@ -1,21 +1,14 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 description="Sets a font for the consoles."
 
 depend()
 {
-	need termencoding
-	after hotplug bootmisc modules
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	need localmount termencoding
+	after hotplug bootmisc
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()
@@ -60,10 +53,14 @@ start()
 	done
 	eend $retval
 
-	# Store the font so we can use it ASAP on boot
+	# Store the last font so we can use it ASAP on boot
 	if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then
 		mkdir -p "$RC_LIBEXECDIR"/console
-		setfont -O "$RC_LIBEXECDIR"/console/font
+		for font in /usr/share/consolefonts/"$consolefont".*; do
+			:
+		done
+		cp "$font" "$RC_LIBEXECDIR"/console
+		echo "${font##*/}" >"$RC_LIBEXECDIR"/console/font
 	fi
 
 	return $retval

init.d/devd.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 command=/sbin/devd
 command_args=$devd_args

init.d/devdb.in

@@ -1,19 +1,11 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2008-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 description="Creates the dev database"
 
 depend()
 {
-	after clock
 	need localmount
 }
 

init.d/devfs.in

@@ -1,96 +1,20 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
-description="Set up the /dev directory"
+description="Mount system critical filesystems in /dev."
 
-depend()
-{
-	provide dev-mount
+depend() {
+	use dev-mount
 	before dev
-	keyword -docker -lxc -prefix -systemd-nspawn -vserver
+	keyword -prefix -vserver
 }
 
-mount_dev()
-{
-	local action conf_d_dir devfstype msg mountopts
-	action=--mount
-	conf_d_dir="${RC_SERVICE%/*/*}/conf.d"
-	msg=Mounting
-	# Some devices require exec, Bug #92921
-	mountopts="exec,nosuid,mode=0755"
-	if yesno ${skip_mount_dev:-no} ; then
-		einfo "/dev will not be mounted due to user request"
-		return 0
-	fi
-	if mountinfo -q /dev; then
-		action=--remount
-		mountopts="remount,$mountopts"
-		msg=Remounting
-	fi
-	if fstabinfo -q /dev; then
-		ebegin "$msg /dev according to fstab"
-		fstabinfo -q $action /dev
-		eend $?
-		return 0
-	fi
-	if grep -q devtmpfs /proc/filesystems; then
-		devfstype=devtmpfs
-		mountopts="$mountopts,size=10M"
-	elif grep -q tmpfs /proc/filesystems; then
-		devfstype=tmpfs
-		mountopts="$mountopts,size=10M"
-	fi
-	if [ -n "$devfstype" ]; then
-		ebegin "$msg $devfstype on /dev"
-		mount -n -t $devfstype -o $mountopts dev /dev
-		eend $?
-	else
-		ewarn "This kernel does not have devtmpfs or tmpfs support, and there"
-		ewarn "is no entry for /dev in fstab."
-		ewarn "This means /dev will not be mounted."
-		ewarn "To avoid this message, set CONFIG_DEVTMPFS or CONFIG_TMPFS to y"
-		ewarn "in your kernel configuration or see ${conf_d_dir}/${RC_SVCNAME}"
-	fi
-	return 0
-}
-
-seed_dev()
-{
-	# Seed /dev with some things that we know we need
-
-	# creating /dev/console, /dev/tty and /dev/tty1 to be able to write
-	# to $CONSOLE with/without bootsplash before udevd creates it
-	[ -c /dev/console ] || mknod -m 600 /dev/console c 5 1
-	[ -c /dev/tty1 ] || mknod -m 620 /dev/tty1 c 4 1
-	[ -c /dev/tty ] || mknod -m 666 /dev/tty c 5 0
-
-	# udevd will dup its stdin/stdout/stderr to /dev/null
-	# and we do not want a file which gets buffered in ram
-	[ -c /dev/null ] || mknod -m 666 /dev/null c 1 3
-
-	# so udev can add its start-message to dmesg
-	[ -c /dev/kmsg ] || mknod -m 660 /dev/kmsg c 1 11
-
-	# extra symbolic links not provided by default
-	[ -e /dev/fd ] || ln -snf /proc/self/fd /dev/fd
-	[ -e /dev/stdin ] || ln -snf /proc/self/fd/0 /dev/stdin
-	[ -e /dev/stdout ] || ln -snf /proc/self/fd/1 /dev/stdout
-	[ -e /dev/stderr ] || ln -snf /proc/self/fd/2 /dev/stderr
-	[ -e /proc/kcore ] && ln -snf /proc/kcore /dev/core
-
-	# Mount required directories as user may not have them in /etc/fstab
+start() {
+	# Mount required stuff as user may not have then in /etc/fstab
 	for x in \
-		"mqueue /dev/mqueue 1777 ,nodev mqueue" \
 		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
-		"tmpfs /dev/shm 1777 ,nodev,mode=1777 shm" \
+		"tmpfs /dev/shm 1777 ,nodev shm" \
 	; do
 		set -- $x
 		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
@@ -109,23 +33,5 @@ seed_dev()
 			eend $?
 		fi
 	done
-}
-
-restorecon_dev()
-{
-	if [ -x /sbin/restorecon ]; then
-		ebegin "Restoring SELinux contexts in /dev"
-		restorecon -rF /dev >/dev/null 2>&1
-		eend $?
-	fi
-
-	return 0
-}
-
-start()
-{
-	mount_dev
-	seed_dev
-	restorecon_dev
 	return 0
 }

init.d/dmesg.in

@@ -1,20 +1,13 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 description="Set the dmesg level for a cleaner boot"
 
 depend()
 {
 	before dev modules
-	keyword -docker -lxc -prefix -systemd-nspawn -vserver
+	keyword -lxc -prefix -vserver
 }
 
 start()

init.d/dumpon.in

@@ -1,18 +1,10 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 description="Configures a specific kernel dump device."
 
 depend() {
-	after clock
 	need swap
 	keyword -jail -prefix
 }

init.d/encswap.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/openrc-run
+#!@PREFIX@/sbin/runscript
 # Copyright 1992-2012 FreeBSD Project
 # Released under the 2-clause BSD license
 

init.d/fsck.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 description="Check and repair filesystems according to /etc/fstab"
 _IFS="
@@ -15,13 +8,12 @@ _IFS="
 
 depend()
 {
-	after clock
 	use dev clock modules
-	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -timeout -vserver -uml
+	keyword -jail -openvz -prefix -timeout -vserver -lxc
 }
 
 _abort() {
-	yesno ${fsck_abort_on_errors:-yes} && rc-abort
+	rc-abort
 	return 1
 }
 
@@ -79,12 +71,14 @@ start()
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
-		local skiptypes
-		skiptypes=$(printf 'no%s,' ${net_fs_list} ${extra_net_fs_list})
-		[ "${skiptypes}" = "no," ] && skiptypes=""
-		fsck_opts="$fsck_opts -C0 -T -t ${skiptypes}noopts=_netdev"
+		local skiptypes x
+		for x in $net_fs_list $extra_net_fs_list; do
+			skiptypes="${skiptypes}no${x},"
+		done
+		skiptypes="${skiptypes}noopts=_netdev"
+		fsck_opts="$fsck_opts -C0 -T -t $skiptypes"
 		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
-			fsck_args=${fsck_args:--A -p}
+			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
 				fsck_opts="$fsck_opts -R"
@@ -93,7 +87,7 @@ start()
 	fi
 
 	trap : INT QUIT
-	fsck ${fsck_args:--p} $fsck_opts "$@"
+	fsck ${fsck_args--p} $fsck_opts "$@"
 	case $? in
 	0)	eend 0; return 0;;
 	1)	ewend 1 "Filesystems repaired"; return 0;;

init.d/hostid.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 extra_commands="reset"
 : ${hostid_file:=/etc/hostid}
@@ -15,7 +8,6 @@ extra_commands="reset"
 depend()
 {
 	use root
-	after clock
 	before devd net
 	keyword -jail -prefix
 }
@@ -48,7 +40,7 @@ reset()
 {
 	local uuid= x="[0-9a-f]" y="$x$x$x$x"
 
-	if command -v kenv >/dev/null 2>&1; then
+	if type kenv >/dev/null 2>&1; then
 		uuid=$(kenv smbios.system.uuid 2>/dev/null)
 	fi
 	case "$uuid" in

init.d/hostname.in

@@ -1,38 +1,17 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 
-depend()
-{
-	after clock
-	keyword -docker -lxc -prefix -systemd-nspawn
+depend() {
+	keyword -prefix -lxc
 }
 
 start()
 {
-	local h source x
-	if [ -s /etc/hostname ] && [ -r /etc/hostname ]; then
-		read h x </etc/hostname
-		source="from /etc/hostname"
-	else
-		# HOSTNAME variable used to be defined in caps in conf.d/hostname.
-		# It is also a magic variable in bash.
-		h=${hostname:-${HOSTNAME}} # checkbashisms: false positive (HOSTNAME var)
-	fi
-	if [ -z "$h" ]; then
-		einfo "Using default system hostname"
-		return 0
-	fi
-	ebegin "Setting hostname to $h $source"
-	hostname "$h"
+	hostname=${hostname-${HOSTNAME-localhost}}
+	ebegin "Setting hostname to $hostname"
+	hostname "$hostname"
 	eend $? "Failed to set the hostname"
 }

init.d/hwclock.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 extra_commands="save show"
 
@@ -30,11 +23,12 @@ fi
 depend()
 {
 	provide clock
-	want modules
 	if yesno $clock_adjfile; then
 		use root
+	else
+		before *
 	fi
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 setupopts()
@@ -68,28 +62,9 @@ _hwclock()
 	return 1
 }
 
-get_noadjfile()
-{
-	if ! yesno $clock_adjfile; then
-		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
-			echo --noadjfile
-		fi
-	fi
-}
-
-rtc_exists()
-{
-	local rtc=
-	for rtc in /dev/rtc /dev/rtc[0-9]*; do
-		[ -e "$rtc" ] && break
-	done
-	[ -e "$rtc" ]
-}
-
 start()
 {
-	local retval=0 errstr="" modname
+	local retval=0 errstr=""
 	setupopts
 
 	if [ -z "$utc_cmd" ]; then
@@ -99,27 +74,31 @@ start()
 
 	ebegin "Setting system clock using the hardware clock [$utc]"
 	if [ -e /proc/modules ]; then
-		if ! rtc_exists; then
-			for x in rtc-cmos rtc genrtc; do
-				modprobe -q $x && rtc_exists && modname="$x" && break
-			done
-			[ -n "$modname" ] &&
-				ewarn "The $modname module needs to be configured in" \
-					"${RC_SERVICE%/*/*}/conf.d/modules or built in."
+		local rtc=
+		for rtc in /dev/rtc /dev/rtc[0-9]*; do
+			[ -e "$rtc" ] && break
+		done
+		if [ ! -e "${rtc}" ]; then
+			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
 		fi
 	fi
 
-	# Always set the kernel's time zone.
-	_hwclock --systz $utc_cmd $(get_noadjfile) $clock_args
-	: $(( retval += $? ))
-
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
-		_hwclock --adjust $utc_cmd $(get_noadjfile)
+		_hwclock --adjust $utc_cmd
 		: $(( retval += $? ))
 	fi
 
-	if yesno ${clock_hctosys:-YES}; then
-		_hwclock --hctosys $utc_cmd $(get_noadjfile) $clock_args
+	# If setting UTC, don't bother to run hwclock when first booting
+	# as that's the default
+	if [ "$PREVLEVEL" != N -o \
+		"$utc_cmd" != --utc -o \
+		-n "$clock_args" ];
+	then
+		if yesno ${clock_hctosys:-YES}; then
+			_hwclock --hctosys $utc_cmd $clock_args
+		else
+			_hwclock --systz $utc_cmd $clock_args
+		fi
 		: $(( retval += $? ))
 	fi
 
@@ -141,7 +120,14 @@ stop()
 
 	ebegin "Setting hardware clock using the system clock" "[$utc]"
 
-	_hwclock --systohc $utc_cmd $(get_noadjfile) $clock_args
+	if ! yesno $clock_adjfile; then
+		# Some implementations don't handle adjustments
+		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
+			utc_cmd="$utc_cmd --noadjfile"
+		fi
+	fi
+
+	_hwclock --systohc $utc_cmd $clock_args
 	retval=$?
 
 	eend $retval "Failed to sync clocks"
@@ -156,5 +142,5 @@ save()
 show()
 {
 	setupopts
-	hwclock --show "$utc_cmd" $(get_noadjfile) $clock_args
+	hwclock --show "$utc_cmd" $clock_args
 }

init.d/ipfw.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
 
@@ -15,7 +8,7 @@ ipfw_ip_in=${ipfw_ip_in-any}
 ipfw_ports_in=${ipfw_ports_in-auth ssh}
 ipfw_ports_nolog=${ipfw_ports_nolog-135-139,445 1026,1027 1433,1434}
 
-extra_commands="panic showstatus"
+opts="panic showstatus"
 
 depend() {
 	before net

init.d/keymaps.in

@@ -1,21 +1,14 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 description="Applies a keymap for the consoles."
 
 depend()
 {
-	need termencoding
-	after devfs
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	need localmount termencoding
+	after bootmisc
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()
@@ -65,8 +58,13 @@ start()
 	if yesno $fix_euro; then
 		ebegin "Fixing font for euro symbol"
 		# Fix some fonts displaying the Euro, #173528.
-		echo "altgr keycode 18 = U+20AC" | loadkeys -q -
+		echo "altgr keycode 18 = U+20AC" | loadkeys -q
 		eend $?
 	fi
-	return 0
+
+	# Save the keymapping for use immediately at boot
+	if checkpath -W "$RC_LIBEXECDIR"; then
+		mkdir -p "$RC_LIBEXECDIR"/console
+		dumpkeys >"$RC_LIBEXECDIR"/console/keymap
+	fi
 }

init.d/killprocs.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
 
 description="Kill all processes so we can unmount disks cleanly."
 
@@ -19,9 +12,11 @@ depend()
 start()
 {
 	ebegin "Terminating remaining processes"
-	kill_all 15 ${killall5_opts}
+	killall5 -15 ${killall5_opts}
+	sleep 1
 	eend 0
 	ebegin "Killing remaining processes"
-	kill_all 9 ${killall5_opts}
+	killall5 -9 ${killall5_opts}
+	sleep 1
 	eend 0
 }