init-linux: Do not remove the $rc_libexecdir/init.d directory

Reported-by: toralf.foerster@gmx.de
X-Gentoo-Bug: 446342
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=446342

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.11
+VERSION=	0.11.8
 PKG=		${NAME}-${VERSION}

conf.d/Makefile

@@ -1,5 +1,6 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount urandom tmpfilesd ${CONF-${OS}}
+CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
+		${CONF-${OS}}
 
 ifeq (${MKNET},)
 CONF+= network staticroute

conf.d/netmount

@@ -0,0 +1,40 @@
+# You will need to set the dependencies in the netmount script to match
+# the network configuration tools you are using. This should be done in
+# this file by following the examples below, and not by changing the
+# service script itself.
+#
+# Each of these examples is meant to be used separately. So, for
+# example, do not set rc_need to something like "net.eth0 dhcpcd".
+#
+# If you are using newnet and configuring your interfaces with static
+# addresses with the network script, you  should use this setting.
+#
+#rc_need="network"
+#
+# If you are using oldnet, you must list the specific net.* services you
+# need.
+#
+# This example assumes all of your netmounts can be reached on
+# eth0.
+#
+#rc_need="net.eth0"
+#
+# This example assumes some of your netmounts are on eth1 and some
+# are on eth2.
+#
+#rc_need="net.eth1 net.eth2"
+#
+# If you are using a dynamic network management tool like
+# networkmanager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
+# manage the network interfaces with the routes to your netmounts, you
+# should list that tool.
+#
+#rc_need="networkmanager"
+#rc_need="dhcpcd"
+#rc_need="wicd"
+#
+# The default setting is designed to be backward compatible with our
+# current setup, but you are highly discouraged from using this. In
+# other words, please change it to be more suited to your system.
+#
+rc_need="net"

doc/net.example.BSD.in

@@ -80,9 +80,9 @@
 # Most drivers that report carrier status function correctly, but some do not
 # One of these faulty drivers is for the Intel e1000 network card, but only
 # at boot time. To get around this you may alter the carrier_timeout value for
-# the interface. -1 is disable, 0 is infinite and any other number of seconds
-# is how long we wait for carrier. The current default is 3 seconds
-#carrier_timeout_eth0=-1
+# the interface. 0 is disable and any other number of seconds is how
+# long we wait for carrier. The current default is disabled.
+#carrier_timeout_eth0=0
 
 # You may wish to disable the interface being brought down when stopping.
 # This is only of use for WakeOnLan.

doc/net.example.Linux.in

@@ -126,6 +126,13 @@
 # tables you may have to set a global metric as the due to a simple read of
 # the routing table taking over a minute at a time.
 
+# Most drivers that report carrier status function correctly, but some do not
+# One of these faulty drivers is for the Intel e1000 network card, but only
+# at boot time. To get around this you may alter the carrier_timeout value for
+# the interface. 0 is disable and any other number of seconds is how
+# long we wait for carrier. The current default is disabled.
+#carrier_timeout_eth0=0
+
 # You may wish to disable the interface being brought down when stopping.
 # This is only of use for WakeOnLan.
 #ifdown_eth0="NO"
@@ -1130,6 +1137,13 @@
 # Hypothetical network card that requires a change-eeprom toggle to enable flashing
 #ethtool_order_eth0="change-eeprom flash change pause coalesce ring offload nfc rxfh-indir ntuple"
 
+#-----------------------------------------------------------------------------
+# Firewalld support
+# If you are using the firewalld daemon to configure your firewall
+# settings and you have specific zones you want to apply to your
+# interfaces, you can do this here.
+#firewalld_zone_eth0="myzone"
+
 ##############################################################################
 # ADVANCED CONFIGURATION
 #

etc/rc.conf.Linux

@@ -21,7 +21,7 @@
 rc_tty_number=12
 
 # If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controler is mounted under
+# whether or not a group for each controller is mounted under
 # /sys/fs/cgroup.
 # Support for process management by cgroups is planned in the future,
 # so if you turn this off, be aware that you may not be able to use that

etc/rc.conf.in

@@ -94,6 +94,10 @@
 # These variables are documented here, but should be configured in
 # /etc/conf.d/foo for service foo and NOT enabled here unless you
 # really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
 
 # Some daemons are started and stopped via start-stop-daemon.
 # We can set some things on a per service basis, like the nicelevel.
@@ -116,6 +120,13 @@
 #rc_foo_need="openvpn"
 #rc_foo_after="clock"
 
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
 # You can also remove dependencies.
 # This is mainly used for saying which servies do NOT provide net.
 #rc_net_tap0_provide="!net"

init.d/.gitignore

@@ -41,5 +41,4 @@ syslogd
 termencoding
 ttys
 wscons
-tmpfilesd.boot
-tmpfilesd.sysinit
+tmpfiles.setup

init.d/Makefile

@@ -1,8 +1,7 @@
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
 	root.in savecache.in swap.in swapfiles.in \
-	tmpfilesd.boot.in tmpfilesd.sysinit.in \
-	swclock.in sysctl.in urandom.in ${SRCS-${OS}}
+	tmpfiles.setup.in swclock.in sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
 # Build our old net foo or not

init.d/devfs.in

@@ -5,8 +5,8 @@
 description="Mount system critical filesystems in /dev."
 
 depend() {
-	use dev-mount udev-mount
-	before udev mdev
+	use dev-mount
+	before dev
 	keyword -prefix -vserver
 }
 

init.d/localmount.in

@@ -22,6 +22,9 @@ start()
 
 	if [ "$RC_UNAME" = Linux ]; then
 		no_netdev="-O no_netdev"
+		if mountinfo -q /usr; then
+			touch $RC_SVCDIR/usr_premounted
+		fi
 	fi
 	ebegin "Mounting local filesystems"
 	mount -at "$types" $no_netdev
@@ -48,7 +51,10 @@ stop()
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
-		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*|/usr"
+		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
+		if [ -e $rc_svcdir/usr_premounted ]; then
+			no_umounts_r="$no_umounts_r|/usr"
+		fi
 	fi
 	no_umounts_r="^($no_umounts_r)$"
 

init.d/net.lo.in

@@ -108,7 +108,7 @@ _wait_for_carrier()
 	_has_carrier  && return 0
 
 	eval timeout=\$carrier_timeout_${IFVAR}
-	timeout=${timeout:-${carrier_timeout:-5}}
+	timeout=${timeout:-${carrier_timeout:-0}}
 
 	# Incase users don't want this nice feature ...
 	[ ${timeout} -le 0 ] && return 0

init.d/netmount.in

@@ -10,7 +10,6 @@ description="Mounts network shares, other than NFS, according to /etc/fstab."
 depend()
 {
 	config /etc/fstab
-	need net
 	use afc-client amd autofs openvpn
 	use dns
 	keyword -jail -prefix -vserver

init.d/tmpfiles.setup.in

@@ -2,7 +2,7 @@
 # Copyright 1999-2012 Gentoo Foundation
 # Released under the 2-clause BSD license.
 
-description="Create tmpfiles.d entries (boot)"
+description="set up tmpfiles.d entries"
 
 depend()
 {
@@ -11,8 +11,8 @@ depend()
 
 start()
 {
-	ebegin "${description/Create/Creating}"
-	@LIBEXECDIR@/sh/tmpfiles.sh --create ${tmpfiles_opts}
+	ebegin "setting up tmpfiles.d entries"
+	@LIBEXECDIR@/sh/tmpfiles.sh --create --remove ${tmpfiles_opts}
 	eend $?
 	return 0
 }

init.d/tmpfilesd.sysinit.in

@@ -1,20 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 1999-2012 Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-description="Create tmpfiles.d entries (sysinit)"
-
-depend()
-{
-	# Convert to 'need dev' when the new udev is ready, for OpenRC 0.11
-	#need dev-mount
-	need dev
-}
-
-start()
-{
-	ebegin "${description/Create/Creating}"
-	@LIBEXECDIR@/sh/tmpfiles.sh --create ${tmpfiles_opts}
-	eend $?
-	return 0
-}

man/rc-status.8

@@ -46,7 +46,7 @@ Show all runlevels and their services.
 List all services that have crashed.
 .It Fl l , -list
 List all defined runlevels.
-.It fl r , -runlevel
+.It Fl r , -runlevel
 Print the current runlevel name.
 .It Fl s , -servicelist
 Show all services.

net/Makefile

@@ -13,7 +13,7 @@ SRCS-Linux=	iwconfig.sh.in
 INC-Linux=	adsl.sh apipa.sh arping.sh bonding.sh br2684ctl.sh bridge.sh \
 		ccwgroup.sh clip.sh ethtool.sh iproute2.sh ifplugd.sh ip6to4.sh \
 		ipppd.sh iwconfig.sh netplugd.sh pppd.sh pump.sh tuntap.sh udhcpc.sh \
-		vlan.sh macvlan.sh ip6rd.sh
+		vlan.sh macvlan.sh ip6rd.sh firewalld.sh
 
 SRCS-NetBSD=
 INC-NetBSD=	ifwatchd.sh

net/firewalld.sh

@@ -0,0 +1,38 @@
+# Copyright (c) 2012 Doug Goldstein <cardoe@cardoe.com>
+# Released under the 2-clause BSD license.
+
+firewalld_depend()
+{
+	after interface
+	before dhcp
+	program firewall-cmd
+	[ "$IFACE" != "lo" ] && need firewalld
+}
+
+_config_vars="$_config_vars firewalld_zone"
+
+firewalld_post_start()
+{
+	local firewalld_zone=
+	eval firewalld_zone=\$firewalld_zone_${IFVAR}
+
+	_exists || return 0
+
+	if [ "${IFACE}" != "lo" ]; then
+		firewall-cmd --zone="${firewalld_zone}" \
+			--change-interface="${IFACE}" > /dev/null 2>&1
+	fi
+
+	return 0
+}
+
+firewalld_pre_stop()
+{
+	_exists || return 0
+
+	if [ "${IFACE}" != "lo" ]; then
+		firewall-cmd --remove-interface="${IFACE}" > /dev/null 2>&1
+	fi
+
+	return 0
+}

runlevels/Makefile

@@ -38,9 +38,9 @@ BOOT-FreeBSD+=	hostid newsyslog savecore syslogd
 # FreeBSD specific stuff
 BOOT-FreeBSD+=	adjkerntz dumpon syscons
 
-BOOT-Linux+=	hwclock keymaps modules mtab procfs termencoding tmpfilesd.boot
+BOOT-Linux+=	hwclock keymaps modules mtab procfs termencoding tmpfiles.setup
 SHUTDOWN-Linux=	killprocs mount-ro
-SYSINIT-Linux=	devfs dmesg sysfs tmpfilesd.sysinit
+SYSINIT-Linux=	devfs dmesg sysfs
 
 # Generic BSD stuff
 BOOT-NetBSD+=	hostid newsyslog savecore syslogd

sh/init.sh.Linux.in

@@ -51,6 +51,10 @@ if [ ! -d /run ]; then
 	fi
 fi
 
+if [ -L /run/openrc ]; then
+	rm /run/openrc
+fi
+
 if [ "$sys" = VSERVER ]; then
 	rm -rf /run/*
 elif ! mountinfo -q /run; then

sh/migrate-to-run.sh.in

@@ -9,41 +9,21 @@ if ! mountinfo -q -f tmpfs "@LIBEXECDIR@/init.d"; then
 	exit 0
 fi
 
-if [ ! -d "@PREFIX@/run" ]; then
-	eerror "'@PREFIX@/run' is not a directory."
-	eerror "This means the OpenRC dependency data cannot be migrated."
-	eerror "Please create the '@PREFIX@/run' directory and reboot the system."
-	exit 1
+if [ ! -d /run ]; then
+	eerror "/run is not a directory."
+	eerror "moving /run to /run.pre-openrc"
+	mv /run /run.pre-openrc
+	mkdir /run
 fi
 
-if ! mountinfo -q -f tmpfs "@PREFIX@/run"; then
-	for x in "@PREFIX@/run/."* "@PREFIX@/run/"*; do
-		case "$x" in
-			"@PREFIX@/run/."|"@PREFIX@/run/..")
-				continue
-				;;
-		esac
-		if [ -e "$x" ]; then
-				eerror "Your '@PREFIX@/run' directory contains files."
-				eerror "Please reboot the system."
-				exit 1
-		fi
-	done
+rm -rf /run/openrc
 
-	mount -t tmpfs -o mode=0755,nosuid,nodev \
-		tmpfs "@PREFIX@/run" 2> /dev/null
-	if [ $? != 0 ]; then
-		eerror "Unable to mount a tmpfs on '@PREFIX@/run'."
-		eerror "This means the OpenRC dependency data cannot be migrated."
-		eerror "Please create the '@PREFIX@/run' directory and reboot the system."
-		exit 1
-	fi
+if ! mountinfo -q -f tmpfs /run; then
+	ln -s "@LIBEXECDIR@"/init.d /run/openrc
+else
+	cp -a "@LIBEXECDIR@/init.d" /run/openrc
+	rc-update -u
 fi
 
-rm -rf "@PREFIX@/run/openrc"
-cp -a "@LIBEXECDIR@/init.d" "@PREFIX@/run/openrc"
-rc-update -u
-rm -rf "@LIBEXECDIR@/init.d"
-umount "@LIBEXECDIR@/init.d"
 einfo "The OpenRC dependency data was migrated successfully."
 exit 0

sh/tmpfiles.sh.in

@@ -61,7 +61,7 @@ _f() {
 
 	if [ ! -e "$path" ]; then
 		dryrun_or_real install -m"$mode" -o"$uid" -g"$gid" /dev/null "$path"
-		[ -n "$arg" ] && _w "$@"
+		[ -z "$arg" ] || _w "$@"
 	fi
 }
 
@@ -72,7 +72,7 @@ _F() {
 	[ $CREATE -gt 0 ] || return 0
 
 	dryrun_or_real install -m"$mode" -o"$uid" -g"$gid" /dev/null "$path"
-	[ -n "$arg" ] && _w "$@"
+	[ -z "$arg" ] || _w "$@"
 }
 
 _d() {
@@ -201,6 +201,7 @@ tmpfiles_d=''
 # `/run/tmpfiles/foo.conf' will always be read after `/etc/tmpfiles.d/bar.conf'
 for d in ${tmpfiles_dirs} ; do
 	[ -d $d ] && for f in ${d}/*.conf ; do
+		[ "$f" = "$d/systemd.conf" ] && continue
 		[ -f $f ] && tmpfiles_basenames="${tmpfiles_basenames}\n${f##*/}"
 	done # for f in ${d}
 done # for d in ${tmpfiles_dirs}
@@ -231,7 +232,7 @@ if [ $(( CLEAN )) -eq 1 ] ; then
 	exit 1
 fi
 
-if [ $(( CREATE + REMOVE )) -ne 1 ] ; then
+if [ "$CREATE$REMOVE" = '00' ]; then
 	printf 'usage: %s [--create] [--remove] [--clean] [--verbose] [--dry-run]\n' "${0##*/}"
 	exit 1
 fi
@@ -252,46 +253,34 @@ for FILE in $tmpfiles_d ; do
 
 	# XXX: Upstream says whitespace is NOT permitted in the Path argument.
 	# But IS allowed when globs are expanded for the x/r/R/z/Z types.
-	while read line; do
+	while read cmd path mode uid gid age arg; do
 		LINENUM=$(( LINENUM+1 ))
 
-		# This will skip over comments and empty lines
-		set -- $line
-
 		# Unless we have both command and path, skip this line.
-		if [ -z "$1" -o -z "$2" ]; then
+		if [ -z "$cmd" -o -z "$path" ]; then
 			continue
 		fi
 
 		# whine about invalid entries
-		case $1 in
+		case $cmd in
 			f|F|w|d|D|p|L|c|b|x|r|R|z|Z) ;;
 			\#) continue ;;
 			*) warninvalid ; continue ;;
 		esac
 
-		cmd=$1
-		path=$2
-
 		# fall back on defaults when parameters are passed as '-'
-		if [ "$3" = '-' -o "$3" = '' ]; then
-			case ${1} in
+		if [ "$mode" = '-' -o "$mode" = '' ]; then
+			case "$cmd" in
 				p|f|F) mode=0644 ;;
 				d|D) mode=0755 ;;
 				z|Z|x|r|R|L) ;;
 			esac
-		else
-			mode=$3
 		fi
-		uid=$4
-		gid=$5
-		age=$6
-		arg=$7
 
-		[ "${4}" = '-' -o "${4}" = '' ] && uid=0
-		[ "${5}" = '-' -o "${5}" = '' ] && gid=0
-		[ "${6}" = '-' -o "${6}" = '' ] && age=0
-		[ "${7}" = '-' -o "${7}" = '' ] && arg=''
+		[ "$uid" = '-' -o "$uid" = '' ] && uid=0
+		[ "$gid" = '-' -o "$gid" = '' ] && gid=0
+		[ "$age" = '-' -o "$age" = '' ] && age=0
+		[ "$arg" = '-' -o "$arg" = '' ] && arg=''
 		set -- "$path" "$mode" "$uid" "$gid" "$age" "$arg"
 
 		[ "$VERBOSE" -eq "1" ] && echo _$cmd "$@"

src/librc/rc.h.in

@@ -40,7 +40,7 @@ __BEGIN_DECLS
 #if defined(PREFIX)
 #define RC_SVCDIR               RC_LIBEXECDIR "/init.d"
 #elif defined(__linux__)
-#define RC_SVCDIR               "@PREFIX@/run/openrc"
+#define RC_SVCDIR               "/run/openrc"
 #else
 #define RC_SVCDIR               RC_LIBEXECDIR "/init.d"
 #endif

src/rc/checkpath.c

@@ -133,7 +133,7 @@ do_check(char *path, uid_t uid, gid_t gid, mode_t mode, inode_t type,
 	}
 
 	if (mode && (st.st_mode & 0777) != mode) {
-		einfo("%s: correcting mode", applet);
+		einfo("%s: correcting mode", path);
 		if (chmod(path, mode)) {
 			eerror("%s: chmod: %s", applet, strerror(errno));
 			return -1;

src/rc/mountinfo.c

@@ -390,11 +390,8 @@ mountinfo(int argc, char **argv)
 	char real_path[PATH_MAX + 1];
 	int opt;
 	int result;
-	bool quiet;
 	char *this_path;
 
-	quiet = rc_yesno(getenv("EINFO_QUIET"));
-
 #define DO_REG(_var)							      \
 	if (_var) free(_var);						      \
 	_var = get_regex(optarg);
@@ -483,7 +480,7 @@ mountinfo(int argc, char **argv)
 		if (skip_point_regex &&
 		    regexec(skip_point_regex, s->value, 0, NULL, 0) == 0)
 			continue;
-		if (! quiet)
+		if (! rc_yesno(getenv("EINFO_QUIET")))
 			printf("%s\n", s->value);
 		result = EXIT_SUCCESS;
 	}