update ChangeLog

- move to libera network
- always notify on successful build

.cirrus.yml

@@ -4,8 +4,7 @@
 test_task:
   freebsd_instance:
     matrix:
-      image: freebsd-13-0-release-amd64
-      image: freebsd-12-2-release-amd64
+      image: freebsd-12-1-release-amd64
       image: freebsd-11-4-release-amd64
   env:
     OS: FreeBSD

.github/workflows/ci-alpine-linux.yml

@@ -1,26 +0,0 @@
-name: ci_alpine_linux
-
-on: [push, pull_request]
-
-jobs:
-
-  gcc-musl:
-    runs-on: ubuntu-latest
-    container: alpine:latest
-    steps:
-      - name: install deps
-        run: >-
-          apk --no-cache add \
-            build-base \
-            meson \
-            pkgconf \
-            linux-pam \
-            linux-pam-dev
-      - name: checkout
-        uses: actions/checkout@v2
-      - run: meson setup builddir/
-        env:
-          CC: gcc
-      - run: ninja -C builddir
-        env:
-          CC: gcc

.github/workflows/ci-ubuntu.yml

@@ -1,32 +0,0 @@
-name: ci_ubuntu
-
-on: [push, pull_request]
-
-jobs:
-
-  gcc-glibc:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v2
-    - run: sudo apt-get update -q
-    - run: sudo apt-get install -q -y build-essential libpam-dev meson
-    - run: meson setup builddir/
-      env:
-        CC: gcc
-    - run: ninja -C builddir
-      env:
-        CC: gcc
-
-
-  clang-glibc:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v2
-    - run: sudo apt-get update -q
-    - run: sudo apt-get install -q -y build-essential clang libpam-dev meson
-    - run: meson setup builddir/
-      env:
-        CC: clang
-    - run: ninja -C builddir
-      env:
-        CC: clang

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.44.10
+VERSION=	0.43.4
 PKG=		${NAME}-${VERSION}

NEWS.md

@@ -4,20 +4,11 @@ OpenRC NEWS
 This file will contain a list of notable changes for each release. Note
 the information in this file is in reverse order.
 
-## OpenRC 0.44
-
-This version is the first to use a meson-based build system.
-The gnu make build system should now be considered deprecated; it will
-be removed sometime after 0.44.x.
-
-I have opened a [discussion](https://github.com/OpenRC/openrc/discussions/441)
-where you can voice concerns about removing it.
-
 ## OpenRC 0.43
 
 This version changes the behavior of the checkpath helper to address
 CVE-2018-21269. on Linux systems, We require  non-terminal symbolic links
-to be owned by root. Since we can't do this on non-linux systems, we do
+to be owned by root. Since we can't do this on non-linux xystems, we do
 not dereference non-terminal symbolic links by default. If you need them
 dereferenced, you should add the "-s" switch to the appropriate
 checkpath calls.

README.md

@@ -4,16 +4,7 @@ OpenRC README
 OpenRC is a dependency-based init system that works with the
 system-provided init program, normally `/sbin/init`.
 
-## building and installing
-
-OpenRC uses the  [meson](http://mesonbuild.com) build system, so use the
-usual methods for this build system to build and install.
-
-The old build system is still available for the 0.44.x branch, but it is
-considered deprecated and will be removed. The previous documentation is
-below.
-
-## Installation (historical)
+## Installation
 
 OpenRC requires GNU make.
 
@@ -22,7 +13,7 @@ executed using this command:
 
 `make install`
 
-## Configuration (historical)
+## Configuration
 
 You may wish to configure the installation by passing one or more of the
 below arguments to the make command
@@ -53,11 +44,9 @@ SH=/bin/sh
 
 We don't support building a static OpenRC with PAM.
 
-You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`
-(This is now handled by the meson build system).
+You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`.
 
-If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`
-(this is not supported in the meson build currently, but patches are welcome).
+If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`.
 
 `PKG_PREFIX` should be set to where packages install to by default.
 
@@ -87,11 +76,6 @@ Obviously, if you're installing this onto a system that does not use
 OpenRC by default then you may wish to backup the above listed files,
 remove them and then install so that the OS hooks into OpenRC.
 
-## Discussions
-
-We are testing [discussions](https://github.com/OpenRC/openrc/discussions), so
-feel free to open topics there.
-
 ## Reporting Bugs
 
 Please report bugs on our [bug tracker](http://github.com/OpenRC/openrc/issues).

README.newnet

@@ -1,5 +1,5 @@
 OpenRC Network Ideals
-=====================
+---------------------
 
 The new style networking for OpenRC is very simplistic - provide a basic means
 of configuring static interface address and routes whilst allowing the

bash-completion/meson.build

@@ -1,10 +0,0 @@
-bash_completions = [
-  'openrc',
-  'openrc-service-script',
-  'rc-service',
-  'rc-status',
-  'rc-update',
-  ]
-
-install_data(bash_completions,
-  install_dir : get_option('datadir') / 'bash-completion/completions')

conf.d/meson.build

@@ -1,59 +0,0 @@
-conf_d_dir = get_option('sysconfdir') / 'conf.d'
-
-conf_common = [
-  'bootmisc',
-  'fsck',
-  'hostname',
-  'localmount',
-  'netmount',
-  'swap',
-  'urandom',
-  ]
-
-conf_net = [
-  'network',
-  'staticroute',
-  ]
-
-conf_FreeBSD = [
-  'ipfw',
-  'modules',
-  'moused',
-  'powerd',
-  'rarpd',
-  'savecore',
-  'syscons',
-  ]
-
-conf_Linux = [
-  'agetty',
-  'consolefont',
-  'devfs',
-  'dmesg',
-  'hwclock',
-  'keymaps',
-  'killprocs',
-  'modules',
-  'mtab',
-  'net-online',
-  ]
-
-conf_NetBSD =  [
-  'moused',
-  'rarpd',
-  'savecore',
-  ]
-
-conf_data = conf_common
-if get_option('newnet')
-  conf_data = conf_data + conf_net
-endif
-if os == 'FreeBSD'
-  conf_data = conf_data + conf_FreeBSD
-elif os == 'Linux'
-  conf_data = conf_data + conf_Linux
-elif os == 'NetBSD'
-  conf_data = conf_data + conf_NetBSD
-endif
-
-install_data(conf_data, install_dir : conf_d_dir)

etc/meson.build

@@ -1,44 +0,0 @@
-etc_conf_data = configuration_data()
-if os == 'FreeBSD'
-  etc_conf_data.set('TERM', 'cons25')
-elif os == 'Linux'
-  etc_conf_data.set('TERM', 'wsvt25')
-endif
-
-etc_conf_common = [
-  'rc.conf',
-  ]
-
-etc_bin_FreeBSD = [
-  'rc.devd',
-  ]
-
-etc_conf_FreeBSD = [
-  'devd.conf',
-  ]
-
-etc_bin_NetBSD =  [
-  'rc.in',
-  'rc.shutdown.in',
-  ]
-
-install_data(etc_conf_common,
-  install_dir : get_option('sysconfdir'))
-
-  if os == 'FreeBSD'
-  install_data(etc_bin_FreeBSD,
-    install_dir : get_option('sysconfdir'),
-    install_mode: 'rwxr-xr-x')
-  install_data(etc_conf_FreeBSD,
-    install_dir : get_option('sysconfdir'))
-endif
-
-if os == 'FreeBSD' or os == 'NetBSD'
-  foreach file : etc_bin_NetBSD
-    configure_file(input : file,
-      output : '@BASENAME@',
-      configuration : etc_conf_data,
-      install_dir: get_option('sysconfdir'),
-      install_mode: 'rwxr-xr-x')
-  endforeach
-endif

init.d/bootmisc.in

@@ -113,10 +113,8 @@ migrate_to_run()
  		rm $src
  	elif [ ! -L $src -a -d $src ]; then
  		ebegin "Migrating $src to $dst"
- 		if ! rmdir $src 2>/dev/null; then
- 			cp -a $src/* $dst/
- 			rm -rf $src
- 		fi
+ 		cp -a $src/* $dst/
+ 		rm -rf $src
  		eend $?
  	fi
  	# If $src doesn't exist at all, just run this

init.d/localmount.in

@@ -13,9 +13,9 @@ description="Mounts disks and swap according to /etc/fstab."
 
 depend()
 {
-	need fsck root
-	use lvm modules
-	after clock lvm modules
+	need fsck
+	use lvm modules root
+	after clock lvm modules root
 	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 

init.d/meson.build

@@ -1,100 +0,0 @@
-init_d_dir = get_option('sysconfdir') / 'init.d'
-
-init_common =  [
-  'bootmisc.in',
-  'fsck.in',
-  'hostname.in',
-  'local.in',
-  'localmount.in',
-  'loopback.in',
-  'netmount.in',
-  'osclock.in',
-  'root.in',
-  'savecache.in',
-  'swap.in',
-  'swclock.in',
-  'sysctl.in',
-  'runsvdir.in',
-  'urandom.in',
-  's6-svscan.in',
-  ]
-
-if get_option('newnet')
-  init_common = init_common + [
-    'network.in',
-    'staticroute.in',
-    ]
-endif
-
-init_Linux =  [
-  'agetty.in',
-  'binfmt.in',
-  'cgroups.in',
-  'consolefont.in',
-  'devfs.in',
-  'dmesg.in',
-  'hwclock.in',
-  'keymaps.in',
-  'killprocs.in',
-  'modules.in',
-  'mount-ro.in',
-  'mtab.in',
-  'numlock.in',
-  'procfs.in',
-  'net-online.in',
-  'save-keymaps.in',
-  'save-termencoding.in',
-  'sysfs.in',
-  'termencoding.in',
-  ]
-
-init_BSD =  [
-  'hostid.in',
-  'moused.in',
-  'newsyslog.in',
-  'pf.in',
-  'rarpd.in',
-  'rc-enabled.in',
-  'rpcbind.in',
-  'savecore.in',
-  'syslogd.in',
-  ]
-
-init_FreeBSD =  [
-  'adjkerntz.in',
-  'devd .in',
-  'dumpon.in',
-  'encswap.in',
-  'ipfw.in',
-  'modules.in',
-  'mixer.in',
-  'nscd.in',
-  'powerd.in',
-  'syscons.in',
-  ]
-
-init_NetBSD =  [
-  'devdb.in',
-  'swap-blk.in',
-  'ttys.in',
-  'wscons.in',
-  ]
-
-init_data = init_common
-if os == 'Dragonfly'
-  init_data = init_data + init_BSD
-elif os == 'FreeBSD' or os == 'Gnu-kFreeBSD'
-  init_data = init_data + init_BSD + init_FreeBSD
-elif os == 'Linux'
-  init_data = init_data + init_Linux
-elif os == 'NetBSD'
-  init_data = init_data + init_BSD + init_NetBSD
-  endif
-
-foreach init_d_file : init_data
-  configure_file(input : init_d_file,
-    output : '@BASENAME@',
-    configuration : init_d_conf_data,
-    install_dir: init_d_dir,
-    install_mode: 'rwxr-xr-x')
-endforeach

init.d/s6-svscan.in

@@ -21,13 +21,9 @@ depend()
 
 start_pre()
 {
-	if [ ! -e "$command" ]; then
-		eerror "$command is missing (please install s6)"
-	else
-		einfo "Creating s6 scan directory"
-		checkpath -d -m 0755 "$RC_SVCDIR"/s6-scan
-	fi
-	return
+	einfo "Creating s6 scan directory"
+	checkpath -d -m 0755 "$RC_SVCDIR"/s6-scan
+	return $?
 }
 
 stop_post()

local.d/meson.build

@@ -1,7 +0,0 @@
-local_d_dir = get_option('sysconfdir') / 'local.d'
-
-local_data =  [
-  'README'
-  ]
-
-install_data(local_data, install_dir : local_d_dir)

man/meson.build

@@ -1,34 +0,0 @@
-man3 = [
-  'einfo.3',
-  'rc_config.3',
-  'rc_deptree.3',
-  'rc_find_pids.3',
-  'rc_plugin_hook.3',
-  'rc_runlevel.3',
-  'rc_service.3',
-  'rc_stringlist.3',
-  ]
-
-man8 = [
-  'openrc.8',
-  'openrc-run.8',
-  'rc-service.8',
-  'rc-status.8',
-  'rc-update.8',
-  'start-stop-daemon.8',
-  'supervise-daemon.8',
-  ]
-
-if os == 'Linux'
-  man8 = man8 + [
-    'rc-sstat.8',
-    'openrc-init.8',
-    'openrc-shutdown.8',
-    ]
-endif
-
-install_data(man3,
-  install_dir : get_option('mandir') / 'man3')
-install_data(man8,
-  install_dir : get_option('mandir') / 'man8')
-meson.add_install_script('meson_man_links.sh', get_option('mandir'), man3 + man8)

man/meson_man_links.sh

@@ -1,20 +0,0 @@
-#!/bin/sh
-
-get_links() {
-	sed -e 's/ ,//g' \
-		-e '/^\.Sh NAME$/,/\.Sh/ s/\.Nm //p' \
-		-n ${MESON_SOURCE_ROOT}/man/${1}
-}
-
-MANDIR="$1"
-shift
-for man in $@; do
-	prefix=${man%%.*}
-	suffix=${man#*.}
-	links=$(get_links ${man})
-	for link in ${links}; do
-		if [ "${link}" != "${prefix}" ]; then
-			ln -sf ${man} ${MESON_INSTALL_DESTDIR_PREFIX}/${MANDIR}/man${suffix}/${link}.${suffix}
-		fi
-	done
-done

man/openrc-run.8

@@ -104,6 +104,8 @@ supervisor=s6.
 or set
 supervisor=supervise-daemon
 to use supervise-daemon.
+Note that supervise-daemon is still in early development, so it is
+considered experimental.
 .It Ar s6_service_path
 The path to the s6 service directory if you are monitoring this service
 with S6. The default is /var/svc.d/${RC_SVCNAME}.

man/supervise-daemon.8

@@ -156,10 +156,6 @@ The same thing as
 but with the standard error output.
 .El
 .Sh ENVIRONMENT
-.Va SSD_IONICELEVEL
-can also set the IO scheduling priority of the daemon, but the command line
-option takes precedence.
-.Pp
 .Va SSD_NICELEVEL
 can also set the scheduling priority of the daemon, but the command line
 option takes precedence.

meson.build

@@ -1,212 +0,0 @@
-project('OpenRC', 'c',
-  version : '0.44.10',
-  license: 'BSD-2',
-  default_options : [
-    'c_std=c99',
-	'prefix=/usr',
-    'warning_level=3',
-    ],
-  meson_version : '>=0.49.0')
-
-cc = meson.get_compiler('c')
-
-audit_dep = dependency('audit', required : get_option('audit'))
-if audit_dep.found()
-  cc_audit_flags = '-DHAVE_AUDIT'
-  else
-  cc_audit_flags = []
-  endif
-
-if get_option('branding') != ''
-  cc_branding_flags = '-DBRANDING=' + get_option('branding')
-else
-  cc_branding_flags = []
-endif
-
-libname = get_option('libdir').split('/')[-1]
-
-option_local_prefix = get_option('local_prefix')
-if option_local_prefix == ''
-  local_prefix = get_option('prefix') / 'usr' / 'local'
-else
-  local_prefix = option_local_prefix
-endif
-
-option_os = get_option('os')
-if option_os == ''
-  uname = find_program('uname')
-  r = run_command(uname, '-s')
-  os = r.stdout().strip()
-  os = '-'.join(os.split('/'))
-else
-  os = option_os
-endif
-
-pam_dep = dependency('pam', required: false)
-if not pam_dep.found()
-  pam_dep = cc.find_library('pam', required: false)
-endif
-if pam_dep.found() and get_option('pam')
-  cc_pam_flags = '-DHAVE_PAM'
-else
-  cc_pam_flags = []
-endif
-
-if not pam_dep.found() and get_option('pam')
-  error('Pam was requested but could not be located')
-  endif
-
-option_pkg_prefix = get_option('pkg_prefix')
-if option_pkg_prefix == ''
-  if os == 'Dragonfly' or os == 'FreeBSD'
-    pkg_prefix = '/usr/local'
-  elif os == 'GNU' or os == 'GNU-kFreeBSD' or os == 'Linux'
-    pkg_prefix = '/usr'
-  elif os == 'NetBSD'
-    pkg_prefix = '/usr/pkg'
-  endif
-else
-  pkg_prefix = option_pkg_prefix
-endif
-
-if get_option('split-usr') == 'auto'
-  split_usr = run_command('test', '-L', '/bin').returncode() != 0
-else
-  split_usr = get_option('split-usr') == 'true'
-endif
-
-rootprefix = get_option('rootprefix')
-rootprefix_default = '/'
-if rootprefix == ''
-rootprefix = rootprefix_default
-endif
-
-bindir = rootprefix / get_option('bindir')
-libdir = rootprefix / get_option('libdir')
-libexecdir = get_option('libexecdir')
-if os == 'Linux' and libexecdir == 'libexec'
-  libexecdir = 'lib'
-endif
-libexecdir = rootprefix / libexecdir
-rc_libexecdir = libexecdir / 'rc'
-rc_bindir = rc_libexecdir / 'bin'
-rc_sbindir = rc_libexecdir / 'sbin'
-sbindir = rootprefix / get_option('sbindir')
-
-crypt_dep = []
-
-selinux_dep = dependency('libselinux', required : get_option('selinux'))
-pam_misc_dep = []
-if selinux_dep.found()
-  cc_selinux_flags = '-DHAVE_SELINUX'
-  if pam_dep.found() and get_option('pam')
-    pam_misc_dep = dependency('pam_misc', required: false)
-    if not pam_misc_dep.found()
-      pam_misc_dep = cc.find_library('pam_misc', required: false)
-    endif
-    if not pam_misc_dep.found() and get_option('pam')
-      error('Pam was requested but could not be located')
-    endif
-  else
-    crypt_dep = dependency('libcrypt', required : false)
-    if not crypt_dep.found()
-      crypt_dep = cc.find_library('crypt', required : true)
-    endif
-  endif
-else
-  cc_selinux_flags = []
-endif
-
-termcap = get_option('termcap')
-if termcap != ''
-  termcap_dep = dependency(termcap)
-  termcap_flags = '-DHAVE_TERMCAP'
-  else
-  termcap_dep = []
-  termcap_flags = []
-endif
-
-if get_option('buildtype').startswith('debug')
-  cc_debug_flags = ['-DRC_DEBUG']
-else
-  cc_debug_flags = []
-endif
-
-if os == 'Linux' or os == 'GNU-kFreeBSD'
-  cc_os_flags = ['-D_DEFAULT_SOURCE']
-elif os == 'FreeBSD'
-  cc_os_flags = ['-D_BSD_SOURCE']
-elif os == 'GNU'
-  cc_os_flags = ['-D_DEFAULT_SOURCE', '-DMAXPATHLEN=4096', '-DPATH_MAX=4096']
-  endif
-
-# Try and use some good cc flags if we're building from git. We don't use
-# -pedantic as it will warn about our perfectly valid use of %m in our logger.
-# We should be using -Wredundant-decls, but our library hidden proto stuff gives
-# loads of warnings. I don't fully understand it (the hidden proto, not the
-# warning) so we just silence the warning.
-cc_warning_flags_test = [
-  '-Wcast-align',
-  '-Wcast-qual',
-  '-Wdeclaration-after-statement',
-  '-Wformat=2',
-  '-Winline',
-  '-Wmissing-declarations',
-  '-Wmissing-format-attribute',
-  '-Wmissing-noreturn',
-  '-Wmissing-prototypes',
-  '-Wnested-externs',
-  '-Wpointer-arith',
-  '-Wsequence-point',
-  '-Wshadow',
-  '-Wwrite-strings',
-  '-Werror=implicit-function-declaration',
-  ]
-cc_warning_flags = cc.get_supported_arguments(cc_warning_flags_test)
-cc_flags = [cc_debug_flags, cc_os_flags, cc_warning_flags]
-add_project_arguments(cc_flags, language : 'c')
-
-incdir = include_directories('src/includes')
-einfo_incdir = include_directories('src/libeinfo')
-rc_incdir = include_directories('src/librc')
-
-init_d_conf_data = configuration_data()
-init_d_conf_data.set('SBINDIR', sbindir)
-init_d_conf_data.set('PKG_PREFIX', pkg_prefix)
-init_d_conf_data.set('SYSCONFDIR', get_option('sysconfdir'))
-
-dl_dep = cc.find_library('dl', required: false)
-util_dep = cc.find_library('util', required: false)
-
-if get_option('bash-completions')
-  subdir('bash-completion')
-endif
-subdir('conf.d')
-subdir('etc')
-subdir('init.d')
-subdir('local.d')
-subdir('man')
-if get_option('pam')
-subdir('pam')
-  endif
-if get_option('pkgconfig')
-subdir('pkgconfig')
-  endif
-subdir('scripts')
-subdir('sh')
-subdir('src')
-subdir('support')
-subdir('sysctl.d')
-if get_option('zsh-completions')
-  subdir('zsh-completion')
-endif
-
-meson.add_install_script('tools/meson_runlevels.sh',
-  os,
-  get_option('newnet') ? 'yes' : 'no',
-  rc_libexecdir,
-  get_option('sysconfdir'),
-  get_option('sysvinit') ? 'yes' : 'no')
-meson.add_install_script('tools/meson_final.sh',
-  rc_libexecdir,
-  os)

meson_options.txt

@@ -1,37 +0,0 @@
-option('audit', type : 'feature', value : 'auto',
-  description : 'enable libaudit support')
-option('bash-completions', type : 'boolean',
-  description : 'install bash completions')
-option('branding', type : 'string',
-  description : 'Add branding to OpenRC')
-option('local_prefix', type : 'string', value : '/usr/local',
-  description : 'default location of user maintained packages')
-option('newnet', type : 'boolean',
-  description : 'build and install our networking scripts')
-option('os', type : 'combo',
-  choices :
-    [ '', 'DragonFly', 'FreeBSD', 'GNU', 'GNU-kFreeBSD', 'Linux', 'NetBSD' ],
-  description : 'Operating System (autodetected if not specified)')
-option('pam', type : 'boolean',
-  description : 'enable PAM support')
-option('pkg_prefix', type : 'string',
-  description : 'default location where packages are installed')
-option('pkgconfig', type : 'boolean',
-  description : 'build PKGConfig files')
-option('rootprefix', type : 'string',
-  description : 'override the root prefix')
-option('selinux', type : 'feature', value : 'auto',
-  description : 'enable SELinux support')
-option('shell', type : 'string', value : '/bin/sh',
-  description : 'Default posix compatible shell')
-option('split-usr', type : 'combo',
-  choices : ['auto', 'true', 'false'],
-  description : '''/bin, /sbin aren't symlinks into /usr''')
-option('sysvinit', type : 'boolean', value : false,
-  description : 'enable SysVinit compatibility (linux only)')
-option('termcap', type : 'combo',
-  choices :
-    [ '', 'ncurses', 'termcap' ],
-  description : 'the termcap library to use')
-option('zsh-completions', type : 'boolean',
-  description : 'install zsh completions')

pam/meson.build

@@ -1,9 +0,0 @@
-pam_dir =	get_option('sysconfdir') / 'pam.d'
-
-pam_files = [
-  'start-stop-daemon',
-  'supervise-daemon',
-  ]
-
-install_data(pam_files,
-  install_dir : pam_dir)

pam/start-stop-daemon

@@ -1,6 +0,0 @@
-#%PAM-1.0
-
-auth            required        pam_permit.so
-account         required        pam_permit.so
-password        required        pam_deny.so
-session         optional        pam_limits.so

pam/supervise-daemon

@@ -1,6 +0,0 @@
-#%PAM-1.0
-
-auth            required        pam_permit.so
-account         required        pam_permit.so
-password        required        pam_deny.so
-session         optional        pam_limits.so

pkgconfig/meson.build

@@ -1,22 +0,0 @@
-pkgconfig_dir =	get_option('libdir') / 'pkgconfig'
-
-pkgconfig_conf_data = configuration_data()
-if rootprefix != '/'
-  pkgconfig_conf_data.set('PREFIX', rootprefix)
-else
-  pkgconfig_conf_data.set('PREFIX', '')
-endif
-pkgconfig_conf_data.set('LIB', get_option('libdir'))
-pkgconfig_conf_data.set('VERSION', meson.project_version())
-
-pkgconfig_files = [
-  'einfo.pc.in',
-  'openrc.pc.in',
-  ]
-
-foreach file : pkgconfig_files
-  configure_file(input : file,
-    output : '@BASENAME@',
-    configuration : pkgconfig_conf_data,
-    install_dir : pkgconfig_dir)
-endforeach

scripts/meson.build

@@ -1,45 +0,0 @@
-script_conf_data = configuration_data()
-script_conf_data.set('SBINDIR', sbindir)
-
-script_dir = rc_libexecdir / 'bin'
-
-scripts_internal = [
-  'on_ac_power',
-  ]
-  
-scripts_Linux = [
-  'rc-sstat.in',
-  ]
-
-scripts_sysvinit = [
-  'halt.in',
-  'poweroff.in',
-  'shutdown.in',
-  'reboot.in',
-  ]
-
-install_data(scripts_internal,
-  install_dir : script_dir,
-  install_mode: 'rwxr-xr-x')
-
-if os == 'Linux'
-  foreach file : scripts_Linux
-    configure_file(input : file,
-      output : '@BASENAME@',
-      configuration : script_conf_data,
-      install_dir: script_dir,
-      install_mode: 'rwxr-xr-x')
-  endforeach
-  if get_option('sysvinit')
-    foreach file : scripts_sysvinit
-      configure_file(input : file,
-        output : '@BASENAME@',
-        configuration : script_conf_data,
-	    install_dir: script_dir,
-        install_mode: 'rwxr-xr-x')
-    endforeach
-  endif
-endif
-
-meson.add_install_script('meson_script_links.sh', rc_libexecdir,
-	sbindir)

scripts/meson_script_links.sh

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-set -e
-set -u
-
-rc_libexecdir="$1"
-sbindir="$2"
-binaries=" halt poweroff rc-sstat reboot shutdown"
-for f in $binaries; do
-	if [ -x "${DESTDIR}${rc_libexecdir}/bin/${f}"  ]; then
-		ln -snf "${rc_libexecdir}/bin/${f}" \
-			"${DESTDIR}${sbindir}/${f}"
-	fi
-done
-# sysvinit is active when halt exits
-if [ -x "${DESTDIR}${rc_libexecdir}/bin/halt"  ]; then
-	ln -snf "${sbindir}/openrc-init" \
-		"${DESTDIR}${sbindir}/init"
-fi

sh/meson.build

@@ -1,84 +0,0 @@
-sh_conf_data = configuration_data()
-if rootprefix == '/'
-  sh_conf_data.set('PREFIX', '')
-  else
-  sh_conf_data.set('PREFIX', rootprefix)
-endif
-sh_conf_data.set('BINDIR', bindir)
-sh_conf_data.set('LIBEXECDIR', rc_libexecdir)
-sh_conf_data.set('LOCAL_PREFIX', local_prefix)
-sh_conf_data.set('PKG_PREFIX', pkg_prefix)
-sh_conf_data.set('SBINDIR', sbindir)
-sh_conf_data.set('SHELL', get_option('shell'))
-sh_conf_data.set('SYSCONFDIR', get_option('sysconfdir'))
-
-sh_dir = rc_libexecdir / 'sh'
-
-sh = [
-  'rc-functions.sh',
-  'rc-mount.sh',
-  'runit.sh',
-  's6.sh',
-  'start-stop-daemon.sh',
-  'supervise-daemon.sh',
-  ]
-
-sh_config = [
-  'functions.sh.in',
-  ]
-
-scripts_config = [
-  'gendepends.sh.in',
-  'openrc-run.sh.in',
-  ]
-
-if os == 'Linux'
-  sh += [
-    'rc-cgroup.sh',
-    ]
-  scripts_config += [
-    'binfmt.sh.in',
-    'cgroup-release-agent.sh.in',
-   ]
-  scripts_config_os = [
-    ['init-early.sh.Linux.in', 'init-early.sh'],
-    ['init.sh.Linux.in', 'init.sh'],
-    ]
-elif os == 'GNU'
-  scripts_config_os = [
-    ['init.sh.GNU.in', 'init.sh'],
-    ]
-elif os == 'Gnu-KFreeBSD'
-  scripts_config_os = [
-    ['init.sh.GNU-kFreeBSD.in', 'init.sh'],
-    ]
-else
-  scripts_config_os = [
-    ['init.sh.BSD.in', 'init.sh'],
-    ]
-endif
-
-install_data(sh,
-  install_dir : sh_dir)
-foreach file : sh_config
-  configure_file(input : file,
-    output : '@BASENAME@',
-    configuration : sh_conf_data,
-    install_dir : sh_dir)
-endforeach
-
-foreach file : scripts_config
-  configure_file(input : file,
-    output : '@BASENAME@',
-    configuration : sh_conf_data,
-    install_dir : sh_dir,
-    install_mode : 'rwxr-xr-x')
-endforeach
-
-foreach file : scripts_config_os
-  configure_file(input : file.get(0),
-    output : file.get(1),
-    configuration : sh_conf_data,
-    install_dir : sh_dir,
-    install_mode : 'rwxr-xr-x')
-endforeach

sh/rc-mount.sh

@@ -48,7 +48,7 @@ do_unmount()
 		retry=4 # Effectively TERM, sleep 1, TERM, sleep 1, KILL, sleep 1
 		while ! LC_ALL=C $cmd "$mnt" 2>/dev/null; do
 			if command -v fuser >/dev/null 2>&1; then
-				pids="$(timeout -s KILL "${rc_fuser_timeout:-60}" \
+				pids="$(timeout -k 10 -s KILL "${rc_fuser_timeout:-60}" \
 					fuser $f_opts "$mnt" 2>/dev/null)"
 			fi
 			case " $pids " in

sh/runit.sh

@@ -20,20 +20,8 @@ runit_start()
 	service_link="${RC_SVCDIR}/sv/${service_path##*/}"
 	ebegin "Starting ${name:-$RC_SVCNAME}"
 	ln -snf "${service_path}" "${service_link}"
-	local i=0 retval=1
-	# it can take upto 5 seconds for runsv to start
-	while [ $i -lt 6 ] ; do
-		if sv start "${service_link}" > /dev/null 2>&1; then
-			retval=0
-			break
-		fi
-		sleep 1 && i=$(expr $i + 1)
-	done
-	if [ $retval -eq 1 ]; then
-		# clean up the link else sv will keep on trying
-		rm "${service_link}"
-	fi
-	eend $retval "Failed to start ${name:-$RC_SVCNAME}"
+	sv start "${service_link}" > /dev/null 2>&1
+	eend $? "Failed to start ${name:-$RC_SVCNAME}"
 }
 
 runit_stop()

src/common/meson.build

@@ -1,6 +0,0 @@
-version_h = vcs_tag(
-  input : 'version.h.in',
-  output : 'version.h')
-version_f = vcs_tag(
-  input : 'version.in',
-  output : 'version')

src/common/version.h.in

@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2007-2015 The OpenRC Authors.
- * See the Authors file at the top-level directory of this distribution and
- * https://github.com/OpenRC/openrc/blob/master/AUTHORS
- *
- * This file is part of OpenRC. It is subject to the license terms in
- * the LICENSE file found in the top-level directory of this
- * distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
- * This file may not be copied, modified, propagated, or distributed
- *    except according to the terms contained in the LICENSE file.
- */
-
-#ifndef _VERSION_H_
-#define _VERSION_H_
-
-#define VERSION "@VCS_TAG@"
-
-#endif

src/common/version.in

@@ -1 +0,0 @@
-@VCS_TAG@

src/libeinfo/meson.build

@@ -1,12 +0,0 @@
-libeinfo_version = '1'
-
-libeinfo = library('einfo', ['libeinfo.c'],
-  c_args : termcap_flags,
-  include_directories : incdir,
-  dependencies : termcap_dep,
-  link_depends : 'einfo.map',
-  version : libeinfo_version,
-  install : true,
-  install_dir : libdir)
-
-install_headers('einfo.h')

src/librc/librc-daemon.c

@@ -15,8 +15,6 @@
  *    except according to the terms contained in the LICENSE file.
  */
 
-#include <signal.h>
-
 #include "queue.h"
 #include "librc.h"
 

src/librc/librc-misc.c

@@ -16,7 +16,6 @@
  */
 
 #include <fnmatch.h>
-#include <stdio.h>
 
 #include "queue.h"
 #include "librc.h"

src/librc/meson.build

@@ -1,33 +0,0 @@
-rc_h_conf_data = configuration_data()
-if rootprefix == '/'
-  rc_h_conf_data.set('PREFIX', '')
-  else
-  rc_h_conf_data.set('PREFIX', rootprefix)
-	endif
-rc_h_conf_data.set('LIB', libname)
-rc_h_conf_data.set('LIBEXECDIR', rc_libexecdir)
-rc_h_conf_data.set('LOCAL_PREFIX', local_prefix)
-rc_h_conf_data.set('PKG_PREFIX', pkg_prefix)
-rc_h_conf_data.set('SYSCONFDIR', get_option('sysconfdir'))
-
-librc_version = '1'
-
-librc_sources = [
-  'librc.c',
-  'librc-daemon.c',
-  'librc-depend.c',
-  'librc-misc.c',
-  'librc-stringlist.c',
-  ]
-
-rc_h = configure_file(input : 'rc.h.in', output : 'rc.h',
-  configuration : rc_h_conf_data)
-
-librc = library('rc', librc_sources,
-  include_directories : [incdir, einfo_incdir],
-  link_depends : 'rc.map',
-  version : librc_version,
-  install : true,
-  install_dir : libdir)
-
-install_headers(rc_h)

src/meson.build

@@ -1,4 +0,0 @@
-subdir('common')
-subdir('libeinfo')
-subdir('librc')
-subdir('rc')

src/rc/broadcast.c

@@ -22,7 +22,6 @@
 #include <time.h>
 #include <unistd.h>
 #include <stdio.h>
-#include <utmp.h>
 #include <utmpx.h>
 #include <pwd.h>
 #include <fcntl.h>

src/rc/checkpath.c

@@ -73,8 +73,7 @@ const char * const longopts_help[] = {
 };
 const char *usagestring = NULL;
 
-static int get_dirfd(char *path, bool symlinks)
-{
+static int get_dirfd(char *path, bool symlinks) {
 	char *ch;
 	char *item;
 	char *linkpath = NULL;
@@ -151,7 +150,7 @@ static char *clean_path(char *path)
 	char *ch;
 	char *ch2;
 	char *str;
-	str = xmalloc(strlen(path) + 1);
+	str = xmalloc(strlen(path));
 	ch = path;
 	ch2 = str;
 	while (true) {
@@ -277,7 +276,7 @@ static int do_check(char *path, uid_t uid, gid_t gid, mode_t mode,
 
 		if (mode && (st.st_mode & 0777) != mode) {
 			if ((type != inode_dir) && (st.st_nlink > 1)) {
-				eerror("%s: chmod: Too many hard links to %s", applet, path);
+				eerror("%s: chmod: %s %s", applet, "Too many hard links to", path);
 				close(readfd);
 				return -1;
 			}

src/rc/meson.build

@@ -1,300 +0,0 @@
-rc_misc_c = files([
-  'rc-misc.c',
-  ])
-
-rc_plugin_c = files([
-  'rc-plugin.c',
-  ])
-
-rc_schedules_c = files([
-  'rc-schedules.c',
-  ])
-
-usage_c = files([
-  '_usage.c',
-  ])
-
-if selinux_dep.found()
-  rc_selinux_c = files([
-    'rc-selinux.c',
-    ])
-else
-  rc_selinux_c = []
-endif
-
-rc_wtmp_c = files([
-  'rc-wtmp.c',
-  ])
-
-executable('rc-status',
-  ['rc-status.c', rc_misc_c, usage_c, version_h],
-  c_args : cc_branding_flags,
-  link_with: [libeinfo, librc],
-  dependencies: [util_dep],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  install: true,
-  install_dir: bindir)
-
-executable('openrc',
-  ['rc.c', 'rc-logger.c', rc_misc_c, rc_plugin_c, usage_c,
-    version_h],
-  c_args : cc_branding_flags,
-  link_with: [libeinfo, librc],
-  dependencies: [dl_dep, util_dep],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  install: true,
-  install_dir: sbindir)
-
-executable('openrc-run',
-  ['openrc-run.c', rc_misc_c, rc_plugin_c, usage_c, 
-  rc_selinux_c, version_h],
-  c_args : [cc_audit_flags, cc_branding_flags, cc_pam_flags, cc_selinux_flags],
-  link_with: [libeinfo, librc],
-  dependencies: [audit_dep, dl_dep, pam_dep, pam_misc_dep, selinux_dep, util_dep, crypt_dep],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  install: true,
-  install_dir: sbindir)
-
-executable('rc',
-  ['rc.c', 'rc-logger.c', rc_misc_c, rc_plugin_c, usage_c, version_h],
-  c_args : cc_branding_flags,
-  link_with: [libeinfo, librc],
-  dependencies: [dl_dep, util_dep],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  install: true,
-  install_dir: sbindir)
-
-executable('rc-service',
-  ['rc-service.c', rc_misc_c, usage_c, version_h],
-  c_args : cc_branding_flags,
-  link_with: [libeinfo, librc],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  install: true,
-  install_dir: sbindir)
-
-executable('rc-update',
-  ['rc-update.c', rc_misc_c, usage_c, version_h],
-  c_args : cc_branding_flags,
-  link_with: [libeinfo, librc],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  install: true,
-  install_dir: sbindir)
-
-executable('runscript',
-  ['openrc-run.c', rc_misc_c, usage_c, 'rc-plugin.c',
-    rc_selinux_c, version_h],
-  c_args : [cc_audit_flags, cc_branding_flags, cc_pam_flags, cc_selinux_flags],
-  link_with: [libeinfo, librc],
-  dependencies: [audit_dep, dl_dep, pam_dep, pam_misc_dep, util_dep, selinux_dep, crypt_dep],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  install: true,
-  install_dir: sbindir)
-
-executable('start-stop-daemon',
-  ['start-stop-daemon.c', 'rc-pipes.c', rc_misc_c, rc_schedules_c,
-	rc_selinux_c, usage_c, version_h],
-  c_args : [cc_audit_flags, cc_branding_flags, cc_pam_flags, cc_selinux_flags],
-  link_with: [libeinfo, librc],
-  dependencies: [audit_dep, dl_dep, pam_dep, pam_misc_dep, util_dep, selinux_dep, crypt_dep],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  install: true,
-  install_dir: sbindir)
-
-executable('supervise-daemon',
-  ['supervise-daemon.c', rc_misc_c, rc_plugin_c, rc_schedules_c,
-    usage_c, version_h],
-  c_args : [cc_branding_flags, cc_pam_flags, cc_selinux_flags],
-  link_with: [libeinfo, librc],
-  dependencies: [dl_dep, pam_dep, util_dep, selinux_dep],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  install: true,
-  install_dir: sbindir)
-
-if os == 'Linux'
-  executable('openrc-init',
-    ['openrc-init.c', rc_plugin_c, rc_wtmp_c, version_h],
-  c_args : cc_selinux_flags,
-    include_directories: [incdir, einfo_incdir, rc_incdir],
-    link_with: [libeinfo, librc],
-    dependencies: [dl_dep, selinux_dep],
-    install: true,
-    install_dir: sbindir)
-
-  executable('openrc-shutdown',
-    ['openrc-shutdown.c', 'broadcast.c', 'rc-sysvinit.c', rc_misc_c,
-		usage_c, rc_wtmp_c, version_h],
-    c_args : cc_branding_flags,
-    include_directories: [incdir, einfo_incdir, rc_incdir],
-    link_with: [libeinfo, librc],
-    install: true,
-    install_dir: sbindir)
-endif
-
-einfo_execs = [
-  'einfon',
-  'einfo',
-  'ewarnn',
-  'ewarn',
-  'eerrorn',
-  'eerror',
-  'ebegin',
-  'eend',
-  'ewend',
-  'eindent',
-  'eoutdent',
-  'esyslog',
-  'eval_ecolors',
-  'ewaitfile',
-  'veinfo',
-  'vewarn',
-  'vebegin',
-  'veend',
-  'vewend',
-  'veindent',
-  'veoutdent',
-  ]
-
-foreach exec: einfo_execs
-  executable(exec,
-    ['do_e.c', rc_misc_c, version_h],
-    include_directories: [incdir, einfo_incdir, rc_incdir],
-    link_with: [libeinfo, librc],
-    install: true,
-    install_dir: rc_bindir)
-endforeach
-
-executable('checkpath',
-  ['checkpath.c', rc_misc_c, usage_c, rc_selinux_c,
-    version_h],
-  c_args : [cc_audit_flags, cc_branding_flags, cc_pam_flags, cc_selinux_flags],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  link_with: [libeinfo, librc],
-  dependencies: [audit_dep, pam_dep, pam_misc_dep, selinux_dep, crypt_dep],
-  install: true,
-  install_dir: rc_bindir)
-
-executable('fstabinfo',
-  ['fstabinfo.c', rc_misc_c, usage_c, version_h],
-  c_args : cc_branding_flags,
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  link_with: [libeinfo, librc],
-  install: true,
-  install_dir: rc_bindir)
-
-executable('mountinfo',
-  ['mountinfo.c', rc_misc_c, usage_c, version_h],
-  c_args : cc_branding_flags,
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  link_with: [libeinfo, librc],
-  install: true,
-  install_dir: rc_bindir)
-
-executable('rc-depend',
-  ['rc-depend.c', rc_misc_c, usage_c, version_h],
-  c_args : cc_branding_flags,
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  link_with: [libeinfo, librc],
-  install: true,
-  install_dir: rc_bindir)
-
-executable('is_newer_than',
-  ['is_newer_than.c', rc_misc_c, version_h],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  link_with: [libeinfo, librc],
-  install: true,
-  install_dir: rc_bindir)
-
-executable('is_older_than',
-  ['is_older_than.c', rc_misc_c, version_h],
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  link_with: [libeinfo, librc],
-  install: true,
-  install_dir: rc_bindir)
-
-service_execs = [
-  'service_starting',
-  'service_started',
-  'service_stopping',
-  'service_stopped',
-  'service_inactive',
-  'service_wasinactive',
-  'service_hotplugged',
-  'service_started_daemon',
-  'service_crashed',
-  ]
-
-foreach exec : service_execs
-  executable(exec,
-    ['do_service.c', rc_misc_c, version_h],
-    include_directories: [incdir, einfo_incdir, rc_incdir],
-    link_with: [libeinfo, librc],
-    install: true,
-    install_dir: rc_bindir)
-endforeach
-
-value_execs = [
-  'service_get_value',
-  'service_set_value',
-  'get_options',
-  'save_options',
-  ]
-
-foreach exec : value_execs
-  executable(exec,
-    ['do_value.c', rc_misc_c, version_h],
-    include_directories: [incdir, einfo_incdir, rc_incdir],
-    link_with: [libeinfo, librc],
-    install: true,
-    install_dir: rc_bindir)
-endforeach
-
-if os == 'Linux'
-  executable('kill_all',
-	  ['kill_all.c', usage_c, version_h],
-    c_args : cc_branding_flags,
-    include_directories: [incdir, einfo_incdir, rc_incdir],
-    link_with: [libeinfo,librc],
-    install: true,
-    install_dir: rc_bindir)
-  endif
-
-executable('shell_var',
-  ['shell_var.c'],
-  install: true,
-  install_dir: rc_bindir)
-
-mark_service_execs =	[
-  'mark_service_starting',
-  'mark_service_started',
-  'mark_service_stopping',
-  'mark_service_stopped',
-  'mark_service_inactive',
-  'mark_service_wasinactive',
-  'mark_service_hotplugged',
-  'mark_service_failed',
-  'mark_service_crashed',
-  ]
-
-foreach exec : mark_service_execs
-  executable(exec,
-    ['do_mark_service.c', rc_misc_c, version_h],
-    include_directories: [incdir, einfo_incdir, rc_incdir],
-    link_with: [libeinfo,librc],
-    install: true,
-    install_dir: rc_sbindir)
-endforeach
-
-executable('rc-abort',
-  'rc-abort.c',
-  include_directories: [einfo_incdir],
-  link_with: [libeinfo],
-  install: true,
-  install_dir: rc_sbindir)
-
-executable('swclock',
-  ['swclock.c', rc_misc_c, usage_c, version_h],
-  c_args : cc_branding_flags,
-  include_directories: [incdir, einfo_incdir, rc_incdir],
-  link_with: [libeinfo,librc],
-  install: true,
-  install_dir: rc_sbindir)

src/rc/rc-selinux.c

@@ -66,7 +66,7 @@ int selinux_util_label(const char *path)
 	int retval = 0;
 	int enforce;
 	struct stat st;
-	char *con;
+	security_context_t con;
 
 	enforce = security_getenforce();
 	if (retval < 0)

src/rc/rc-status.c

@@ -20,7 +20,6 @@
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
-#include <inttypes.h>
 
 #include "einfo.h"
 #include "queue.h"
@@ -97,12 +96,14 @@ static char *get_uptime(const char *service)
 {
 	RC_SERVICE state = rc_service_state(service);
 	char *start_count;
+	time_t now;
 	char *start_time_string;
 	time_t start_time;
-	int64_t diff_days;
-	int64_t diff_hours;
-	int64_t diff_mins;
-	int64_t diff_secs;
+	time_t time_diff;
+	time_t diff_days = (time_t) 0;
+	time_t diff_hours = (time_t) 0;
+	time_t diff_mins = (time_t) 0;
+	time_t diff_secs = (time_t) 0;
 	char *uptime = NULL;
 
 	if (state & RC_SERVICE_STARTED) {
@@ -110,21 +111,29 @@ static char *get_uptime(const char *service)
 		start_time_string = rc_service_value_get(service, "start_time");
 		if (start_count && start_time_string) {
 			start_time = to_time_t(start_time_string);
-			diff_secs = (int64_t) difftime(time(NULL), start_time);
-			diff_days = diff_secs / 86400;
-			diff_secs = diff_secs % 86400;
-			diff_hours = diff_secs / 3600;
-			diff_secs = diff_secs % 3600;
-			diff_mins = diff_secs / 60;
-			diff_secs = diff_secs % 60;
+			now = time(NULL);
+			time_diff = (time_t) difftime(now, start_time);
+			diff_secs = time_diff;
+			if (diff_secs > (time_t) 86400) {
+				diff_days = diff_secs / (time_t) 86400;
+				diff_secs %= diff_days * (time_t) 86400;
+			}
+			if (diff_secs > (time_t) 3600) {
+				diff_hours = diff_secs / (time_t) 3600;
+				diff_secs %= diff_hours * (time_t) 3600;
+			}
+			if (diff_secs > (time_t) 60) {
+				diff_mins = diff_secs / (time_t) 60;
+				diff_secs %= diff_mins * (time_t) 60;
+			}
 			if (diff_days > 0)
 				xasprintf(&uptime,
-						"%"PRId64" day(s) %02"PRId64":%02"PRId64":%02"PRId64" (%s)",
+						"%ld day(s) %02ld:%02ld:%02ld (%s)",
 						diff_days, diff_hours, diff_mins, diff_secs,
 						start_count);
 			else
 				xasprintf(&uptime,
-						"%02"PRId64":%02"PRId64":%02"PRId64" (%s)",
+						"%02ld:%02ld:%02ld (%s)",
 						diff_hours, diff_mins, diff_secs, start_count);
 		}
 	}

src/rc/supervise-daemon.c

@@ -1,6 +1,6 @@
 /*
  * supervise-daemon
- * This is a supervisor for daemons.
+ * This is an experimental supervisor for daemons.
  * It will start a deamon and make sure it restarts if it crashes.
  */
 
@@ -423,8 +423,7 @@ static void child_process(char *exec, char **argv)
 		if ((strncmp(env->value, "RC_", 3) == 0 &&
 			strncmp(env->value, "RC_SERVICE=", 11) != 0 &&
 			strncmp(env->value, "RC_SVCNAME=", 11) != 0) ||
-		    strncmp(env->value, "SSD_NICELEVEL=", 14) == 0 ||
-		    strncmp(env->value, "SSD_IONICELEVEL=", 16) == 0)
+		    strncmp(env->value, "SSD_NICELEVEL=", 14) == 0)
 		{
 			p = strchr(env->value, '=');
 			*p = '\0';
@@ -734,17 +733,6 @@ int main(int argc, char **argv)
 		if (sscanf(tmp, "%d", &nicelevel) != 1)
 			eerror("%s: invalid nice level `%s' (SSD_NICELEVEL)",
 			    applet, tmp);
-	if ((tmp = getenv("SSD_IONICELEVEL"))) {
-		int n = sscanf(tmp, "%d:%d", &ionicec, &ioniced);
-		if (n != 1 && n != 2)
-			eerror("%s: invalid ionice level `%s' (SSD_IONICELEVEL)",
-			    applet, tmp);
-		if (ionicec == 0)
-			ioniced = 0;
-		else if (ionicec == 3)
-			ioniced = 7;
-		ionicec <<= 13; /* class shift */
-	}
 
 	/* Get our user name and initial dir */
 	p = getenv("USER");

support/deptree2dot/meson.build

@@ -1,11 +0,0 @@
-deptree2dot_dir =	support_dir / 'deptree2dot'
-
-deptree2dot_bin =	['deptree2dot']
-deptree2dot_data =	['README.md']
-
-install_data(deptree2dot_bin,
-  install_dir : deptree2dot_dir,
-  install_mode : 'rwxr-xr-x')
-
-install_data(deptree2dot_data,
-  install_dir : deptree2dot_dir)

support/init.d.examples/avahi-dnsconfd.in

@@ -9,7 +9,7 @@
 # This file may not be copied, modified, propagated, or distributed
 # except according to the terms contained in the LICENSE file.
 
-command=/sbin/avahi-dnsconfd
+command=@PKG_PREFIX@/sbin/avahi-dnsconfd
 command_args="$avahi_dnsconfd_args -D"
 pidfile=/var/run/avahi-dnsconfd.pid
 name="Avahi DNS Configuration Daemon"

support/init.d.examples/avahid.in

@@ -9,7 +9,7 @@
 # This file may not be copied, modified, propagated, or distributed
 # except according to the terms contained in the LICENSE file.
 
-command=/sbin/avahi-daemon
+command=@PKG_PREFIX@/sbin/avahi-daemon
 command_args="$avahid_args -D"
 pidfile=/var/run/avahi-daemon/pid
 name="Avahi Service Advertisement Daemon"

support/init.d.examples/dbus.in

@@ -9,7 +9,7 @@
 # This file may not be copied, modified, propagated, or distributed
 # except according to the terms contained in the LICENSE file.
 
-command=/bin/dbus-daemon
+command=@PKG_PREFIX@/bin/dbus-daemon
 pidfile=/var/run/dbus/pid
 command_args="${dbusd_args---system}"
 name="Message Bus Daemon"

support/init.d.examples/dnsmasq.in

@@ -9,7 +9,7 @@
 # This file may not be copied, modified, propagated, or distributed
 # except according to the terms contained in the LICENSE file.
 
-command=/sbin/dnsmasq
+command=@PKG_PREFIX@/sbin/dnsmasq
 command_args=$dnsmasq_args
 pidfile=/var/run/dnsmasq.pid
 required_files=/etc/dnsmasq.conf

support/init.d.examples/hald.in

@@ -9,7 +9,7 @@
 # This file may not be copied, modified, propagated, or distributed
 # except according to the terms contained in the LICENSE file.
 
-command=/sbin/hald
+command=@PKG_PREFIX@/sbin/hald
 pidfile=/var/run/hald/hald.pid
 command_args=$hald_args
 name="Hardware Abstraction Layer Daemon"

support/init.d.examples/meson.build

@@ -1,30 +0,0 @@
-init_d_examples_dir = support_dir / 'init.d.examples'
-
-init_d_examples =  [
-  'avahi-dnsconfd.in',
-  'avahid.in',
-  'dhcpcd.in',
-  'dbus.in',
-  'hald.in',
-  'named.in',
-  'ntpd.in',
-  'openvpn.in',
-  'polkitd.in',
-  'sshd.in',
-  'wpa_supplicant.in',
-  ]
-
-init_d_examples_data = [
-  'README.md',
-  ]
-
-foreach init_d_example: init_d_examples
-  configure_file(input : init_d_example,
-    output : '@BASENAME@',
-    configuration : init_d_conf_data,
-    install_dir : init_d_examples_dir,
-    install_mode : 'rwxr-xr-x')
-endforeach
-
-install_data(init_d_examples_data,
-  install_dir : init_d_examples_dir)

support/init.d.examples/openvpn.in

@@ -12,10 +12,10 @@
 vpn=${RC_SVCNAME#*.}
 name="OpenVPN"
 [ "$vpn" != openvpn ] && name="$name ($vpn)"
-command=/sbin/openvpn
+command=@PKG_PREFIX@/sbin/openvpn
 
 pidfile=/var/run/"$RC_SVCNAME".pid
-: ${openvpn_dir:=/etc/openvpn}
+: ${openvpn_dir:=@PKG_PREFIX@/etc/openvpn}
 : ${openvpn_config:=$openvpn_dir/$vpn.conf}
 command_args="$openvpn_args --daemon --config $openvpn_config"
 command_args="$command_args --writepid $pidfile"

support/init.d.examples/polkitd.in

@@ -9,7 +9,7 @@
 # This file may not be copied, modified, propagated, or distributed
 # except according to the terms contained in the LICENSE file.
 
-command=/sbin/polkitd
+command=@PKG_PREFIX@/sbin/polkitd
 pidfile=/var/run/polkitd/polkitd.pid
 command_args="$polkitd_args"
 name="PolicyKit Daemon"

support/meson.build

@@ -1,7 +0,0 @@
-support_dir = get_option('datadir') / meson.project_name().to_lower()
-support_dir = support_dir / 'support'
-
-subdir('deptree2dot')
-subdir('init.d.examples')
-subdir('openvpn')
-subdir('sysvinit')

support/openvpn/meson.build

@@ -1,10 +0,0 @@
-openvpn_dir = support_dir / 'openvpn'
-
-openvpn_bin =  ['down.sh', 'up.sh']
-openvpn_data =  ['README.md']
-
-install_data(openvpn_bin,
-  install_dir : openvpn_dir,
-  install_mode : 'rwxr-xr-x')
-install_data(openvpn_data,
-  install_dir : openvpn_dir)

support/sysvinit/meson.build

@@ -1,6 +0,0 @@
-sysvinit_dir =	support_dir / 'sysvinit'
-
-sysvinit_data =	['halt.sh', 'inittab', 'README.md']
-
-install_data(sysvinit_data,
-	install_dir : sysvinit_dir)

sysctl.d/meson.build

@@ -1,6 +0,0 @@
-sysctl_data =  [
-  'README',
-  ]
-
-sysctldir = get_option('sysconfdir') / 'sysctl.d'
-install_data(sysctl_data, install_dir : sysctldir)

tools/meson_final.sh

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-set -e
-set -u
-
-rc_libexecdir="$1"
-os="$2"
-
-if [ ${os} != Linux ]; then
-	install -d "${DESTDIR}/${rc_libexecdir}"/init.d
-fi
-install -d "${DESTDIR}/${rc_libexecdir}"/tmp
-install -m 644 "${MESON_BUILD_ROOT}/src/common/version" "${DESTDIR}/${rc_libexecdir}"

tools/meson_runlevels.sh

@@ -1,101 +0,0 @@
-#!/bin/sh
-
-set -e
-set -u
-
-os="$1"
-net="$2"
-rc_libexecdir="$3"
-sysconfdir="$4"
-sysvinit="$5"
-
-init_d_dir="${sysconfdir}/init.d"
-leveldir="${sysconfdir}/runlevels"
-sysinitdir="${leveldir}/sysinit"
-bootdir="${leveldir}/boot"
-defaultdir="${leveldir}/default"
-nonetworkdir="${leveldir}/nonetwork"
-shutdowndir="${leveldir}/shutdown"
-
-sysinit=
-case "${os}" in
-	Linux)
-		sysinit="${sysinit} cgroups devfs dmesg sysfs"
-		;;
-esac
-
-boot="bootmisc fsck hostname localmount loopback root swap sysctl urandom"
-if [ "${net}" = yes ]; then
-	boot="${boot} network staticroute"
-fi
-boot_BSD="hostid newsyslog savecore syslogd"
-
-case "${os}" in
-	DragonFly)
-		boot="${boot} ${boot_BSD}"
-		;;
-	FreeBSD|GNU-kFreeBSD)
-		boot="${boot} ${boot_BSD} adjkerntz dumpon modules syscons"
-		;;
-	Linux)
-		boot="${boot} binfmt hwclock keymaps modules mtab procfs
-		save-keymaps save-termencoding termencoding"
-		;;
-	NetBSD)
-		boot="${boot} ${boot_BSD} devdb swap-blk tys wscons"
-		;;
-esac
-
-default="local netmount"
-
-nonetwork="local"
-
-shutdown="savecache"
-case "${os}" in
-	Linux)
-		shutdown="${shutdown} killprocs mount-ro"
-		;;
-esac
-
-if ! test -d "${DESTDIR}${sysinitdir}"; then
-	install -d "${DESTDIR}${sysinitdir}"
-	for x in ${sysinit}; do
-		ln -snf "${init_d_dir}/$x" "${DESTDIR}${sysinitdir}/$x"
-	done
-fi
-
-if ! test -d "${DESTDIR}${bootdir}"; then
-	install -d "${DESTDIR}${bootdir}"
-	for x in ${boot}; do
-		ln -snf "${init_d_dir}/$x" "${DESTDIR}${bootdir}/$x"
-	done
-fi
-
-if ! test -d "${DESTDIR}${defaultdir}"; then
-	install -d "${DESTDIR}${defaultdir}"
-	for x in ${default}; do
-		ln -snf "${init_d_dir}/$x" "${DESTDIR}${defaultdir}/$x"
-	done
-fi
-
-if ! test -d "${DESTDIR}${nonetworkdir}"; then
-	install -d "${DESTDIR}${nonetworkdir}"
-	for x in ${nonetwork}; do
-		ln -snf "${init_d_dir}/$x" "${DESTDIR}${nonetworkdir}/$x"
-	done
-fi
-
-if ! test -d "${DESTDIR}${shutdowndir}"; then
-	install -d "${DESTDIR}${shutdowndir}"
-	for x in ${shutdown}; do
-		ln -snf "${init_d_dir}/$x" "${DESTDIR}${shutdowndir}/$x"
-	done
-fi
-if test "${sysvinit}" = yes && test "${os}" = Linux; then \
-	for x in tty1 tty2 tty3 tty4 tty5 tty6; do
-		ln -snf "${init_d_dir}/agetty" "${DESTDIR}/${init_d_dir}/agetty.$x"
-		ln -snf "${init_d_dir}/agetty.$x" "${DESTDIR}/${defaultdir}/agetty.$x"
-	done;
-fi
-
-ln -snf "${rc_libexecdir}"/sh/functions.sh "${DESTDIR}/${init_d_dir}"

zsh-completion/meson.build

@@ -1,9 +0,0 @@
-zsh_completions = [
-  '_openrc',
-  '_rc-service',
-  '_rc-status',
-  '_rc-update',
-  ]
-
-install_data(zsh_completions,
-  install_dir : get_option('datadir') / 'zsh/site-functions')