I flubbed up the merge on the new fixes, releasing a 0.9.8.4 with the actual fixes.

This reverts commit 6d5a2d5f9e.
There are interfaces, such as adsl and ppp interfaces which need to be
brought down. Also, the WOL setting is a good case for bringingdown
interfaces.

Reported-by: Miguel Sanjurjo <Miguel.Sanjurjo @gmail.com>
X-Gentoo-Bug: 401269
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=401269

Makefile

@@ -4,7 +4,7 @@
 
 include Makefile.inc
 
-SUBDIR=		conf.d doc etc init.d local.d sysctl.d man net scripts sh src
+SUBDIR=		conf.d doc etc init.d local.d man net scripts sh src
 
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes
@@ -25,8 +25,6 @@ include ${MK}/dist.mk
 include ${MK}/git.mk
 
 _installafter:
-ifneq ($(OS),Linux)
 	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
-endif
 	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/tmp
 	${ECHO} "${VERSION}${GITVER}" > ${DESTDIR}/${LIBEXECDIR}/version

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.10
+VERSION=	0.9.8.4
 PKG=		${NAME}-${VERSION}

README

@@ -12,6 +12,7 @@ LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
 MKPAM=pam
 MKPKGCONFIG=no
+MKRCSYS=prefix
 MKSELINUX=yes
 MKSTATICLIBS=no
 MKTERMCAP=ncurses
@@ -33,6 +34,20 @@ LOCAL_PREFIX should be set when to where user maintained packages are.
 Only set LOCAL_PREFIX if different from PKG_PREFIX.
 PREFIX should be set when OpenRC is not installed to /.
 
+MKRCSYS should be set only if you need to specify a default system
+subtype. The subtype should be set to match the type of environment the
+file is installed into, not the virtualization the environment is
+capable of handling. Here is a list of subtypes and their meanings.
+
+jail	FreeBSD jail
+lxc	Linux container
+openvz	Linux OpenVZ
+prefix	Linux and *BSD prefix system
+uml	UsermodeLinux
+vserver	Linux vserver
+xen0 Linux and NetBSD xen0 Domain
+xenU Linux and NetBSD xenU Domain
+
 If any of the following files exist then we do not overwrite them
 /etc/devd.conf
 /etc/rc

TODO

@@ -1,21 +1,7 @@
-- ensure all forks block, restore and unblock signals. needs review
+- ensure all forks block, restore and unblock signals. needs review 
 
 - add support somehow for optional translations
 
 - oldnet[bridging]: Review setting of bridge configuration on dynamic interface add
 
 - Document rc-depend binary.
-
-- _ifindex is not a reliable means of calculating metrics:
-	_ifindex is used for calculating metrics for new devices but has a major
-	problem: Since it's only the nth entry in /proc/net/dev
-	And devices may be removed from that file, and reordered, you won't always
-	get the same result.
-	If you do:
-	- add eth0 - _ifindex (eth0=0)
-	- add vlan1 - _ifindex (eth0=0,vlan1=1)
-	- add vlan2 - _ifindex (eth0=0,vlan1=1,vlan2=2)
-	- rem vlan1 - _ifindex (eth0=0,vlan2=1)
-	- add vlan3 - _ifindex (eth0=0,vlan2=1,vlan3=2)
-	Now your routing table has entries for both vlan2 and vlan3 with a metric of 2.
-

conf.d/adjkerntz

@@ -1,10 +1,10 @@
 # Set CLOCK to "UTC" if your system clock is set to UTC (also known as
-# Greenwich Mean Time).  If your clock is set to the local time, then
-# set CLOCK to "local".  Note that if you dual boot with Windows, then
+# Greenwich Mean Time).  If your clock is set to the local time, then 
+# set CLOCK to "local".  Note that if you dual boot with Windows, then 
 # you should set it to "local".
 clock="UTC"
 
-# If you want to set the Hardware Clock to the current System Time
+# If you want to set the Hardware Clock to the current System Time 
 # during shutdown, then say "YES" here.
 # You normally don't need to do this if you run a ntp daemon.
 clock_systohc="NO"

conf.d/consolefont

@@ -1,10 +1,9 @@
-# The consolefont service is not activated by default. If you need to
-# use it, you should run "rc-update add consolefont boot" as root.
-#
 # consolefont specifies the default font that you'd like Linux to use on the
 # console.  You can find a good selection of fonts in /usr/share/consolefonts;
 # you shouldn't specify the trailing ".psf.gz", just the font name below.
 # To use the default console font, comment out the CONSOLEFONT setting below.
+# This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
+# not want to use it, run "rc-update del consolefont boot" as root).
 consolefont="default8x16"
 
 # consoletranslation is the charset map file to use.  Leave commented to use

conf.d/hwclock

@@ -1,20 +1,22 @@
 # Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
-# Greenwich Mean Time).  If that clock is set to the local time, then
-# set CLOCK to "local".  Note that if you dual boot with Windows, then
+# Greenwich Mean Time).  If that clock is set to the local time, then 
+# set CLOCK to "local".  Note that if you dual boot with Windows, then 
 # you should set it to "local".
 clock="UTC"
 
-# If you want the hwclock script to set the system time (software clock)
-# to match the current hardware clock during bootup, leave this
-# commented out.
-# However, you can set this to "NO" ifyou are running a modern kernel
-# with CONFIG_RTC_HCTOSYS set to y and your hardware clock set to UTC.
-#clock_hctosys="YES"
-
-# If you do not want to set the hardware clock to the current system
-# time (software clock) during shutdown, set this to no.
-#clock_systohc="YES"
+# If you want to set the Hardware Clock to the current System Time 
+# (software clock) during shutdown, then say "YES" here.
+# You normally don't need to do this if you run a ntp daemon.
+clock_systohc="NO"
 
+# If you want to set the system time to the current hardware clock
+# during bootup, then say "YES" here. You do not need this if you are
+# running a modern kernel with CONFIG_RTC_HCTOSYS set to y.
+# Also, be aware that if you set this to "NO", the system time will
+# never be saved to the hardware clock unless you set
+# clock_systohc="YES" above.
+clock_hctosys="YES"
+ 
 # If you wish to pass any other arguments to hwclock during bootup,
 # you may do so here. Alpha users may wish to use --arc or --srm here.
 clock_args=""

conf.d/keymaps

@@ -12,7 +12,7 @@ windowkeys="NO"
 extended_keymaps=""
 #extended_keymaps="backspace keypad euro2"
 
-# Tell dumpkeys(1) to interpret character action codes to be
+# Tell dumpkeys(1) to interpret character action codes to be 
 # from the specified character set.
 # This only matters if you set unicode="yes" in /etc/rc.conf.
 # For a list of valid sets, run `dumpkeys --help`

conf.d/moused

@@ -11,6 +11,6 @@
 
 # You can also multiplex the init script for each device like so
 #   ln -s moused /etc/init.d/moused.ums0
-# This enables you to have a config file per mouse (forces moused_device
+# This enables you to have a config file per mouse (forces moused_device 
 # to ums0 in this case) and control each mouse.
 # devd can also start and stop these mice, which laptop users will find handy.

doc/net.example.Linux.in

@@ -34,7 +34,7 @@
 # In other words, you probably should DO NOTHING HERE...
 
 # Prefer ifconfig over iproute2
-#modules="!iproute2"
+#modules="ifconfig"
 
 # You can also specify other modules for an interface
 # In this case we prefer udhcpc over dhcpcd
@@ -57,7 +57,7 @@
 
 # If you don't specify an interface then we prefer iproute2 if it's installed
 # To prefer ifconfig over iproute2
-#modules="!iproute2"
+#modules="ifconfig"
 
 # For a static configuration, use something like this
 # (They all do exactly the same thing btw)
@@ -586,15 +586,10 @@
 #vlan_start_eth0="no"
 
 # If you do the above then you may want to depend on eth0 like so
-# rc_net_vlan1_need="net.eth0"
+# rc_need_vlan1="net.eth0"
 # NOTE: depend functions only work in /etc/conf.d/net
 # and not in profile configs such as /etc/conf.d/net.foo
 
-# Also, you might want to make eth0 not provide net in this case so that
-# dependent services will start when the vlan is active instead of the
-# physical interface.
-# rc_net_eth0_provide="!net"
-
 # MAC-VLAN support
 # The following configuration can be used to create a new interface 'macvlan0'
 # linked to 'eth0'
@@ -616,27 +611,14 @@
 #slaves_bond0="eth0 eth1 eth2"
 #config_bond0="null" # You may not want to assign an IP the the bond
 
-# Please note, that you should generally NOT try to change the MAC addresses of
-# a bond interface yourself. If you do so, the kernel and your network switches
-# may not work quite right. It is permissible to set the MAC addresses of bond
-# slaves BEFORE the bond comes up, but not after the bond is up (it will change
-# MAC addresses of the slaves on it's own).
-
-# You can also configure the parameters of the bond here, which must be done
-# via sysfs on 2.6 kernels or newer. The description of all the options can be
-# found in the kernel: /usr/src/linux-*/Documentation/networking/bonding.txt
-# You will probably want the 'mode' option at the least.
-# Some possible parameters: mode fail_over_mac arp_validate arp_interval
-# arp_ip_target downdelay updelay lacp_rate ad_select xmit_hash_policy
-# num_grat_arp num_unsol_na miimon primary primary_reselect use_carrier
-# active_slave queue_id all_slaves_active resend_igmp min_links
-#mode_bond0="round-robin"
-#miimon_bond0="100"
+# You can also configure the bond here, which must be done via sysfs on 2.6
+# kernels or newer. See the kernel bonding documentation for a description of
+# these options.
 #arp_ip_target_bond0="+26.0.0.0"
 
 # If any of the slaves require extra configuration - for example wireless or
 # ppp devices - we need to depend function on the bonded interfaces
-#rc_net_bond0_need="net.eth0 net.eth1"
+#rc_need_bond0="net.eth0 net.eth1"
 
 
 #-----------------------------------------------------------------------------
@@ -753,7 +735,7 @@
 # If the link require extra configuration - for example wireless or
 # RFC 268 bridge - we need to depend on the bridge so they get
 # configured correctly.
-#rc_net_ppp0_need="net.nas0"
+#rc_need_ppp0="net.nas0"
 
 #WARNING: if MTU of the PPP interface is less than 1500 and you use this
 #machine as a router, you should add the following rule to your firewall
@@ -793,8 +775,6 @@
 
 #-----------------------------------------------------------------------------
 # MAC changer
-# Warning: Do NOT use this on bonding interfaces! Bonding changes MACs itself.
-#
 # To set a specific MAC address
 #mac_eth0="00:11:22:33:44:55"
 
@@ -867,7 +847,7 @@
 
 # If any of the ports require extra configuration - for example wireless or
 # ppp devices - we need to depend on them like so.
-#rc_net_br0_need="net.eth0 net.eth1"
+#rc_need_br0="net.eth0 net.eth1"
 
 # Below is an example of configuring the bridge
 # Consult "man brctl" for more details
@@ -918,7 +898,7 @@
 # link_6to4="eth0"		# Interface to base its addresses on
 # config_6to4="ip6to4"
 # You may want to depend on eth0 like so
-#rc_net_6to4_need="net.eth0"
+#rc_need_6to4="net.eth0"
 # To ensure that eth0 is configured before 6to4. Of course, the tunnel could be
 # any name and this also works for any configured interface.
 # NOTE: If you're not using iproute2 then your 6to4 tunnel has to be called

etc/Makefile

@@ -24,5 +24,14 @@ SED_EXTRA=	${SED_EXTRA-${OS}}
 
 include ${MK}/scripts.mk
 
+# We can't use "ifndef" here because that treats set-but-empty
+# as not-set which is not what we want
+MKRCSYS ?= automagicplease
+ifeq (${MKRCSYS},automagicplease)
+# If the user isn't picking a default, then have the
+# config go with runtime automagic detection #357247
+rc.conf: SED_EXTRA += -e '/^rc_sys=""/s:^:\#:'
+MKRCSYS =
+endif
 rc.conf: rc.conf.in rc.conf.${OS}
 	${SED} ${SED_REPLACE} ${SED_EXTRA} $^ > $@

etc/rc.conf.FreeBSD

@@ -4,9 +4,11 @@
 # This is the subsystem type. Valid options on FreeBSD:
 # ""        - nothing special
 # "jail"    - FreeBSD jails
-# If this is commented out, automatic detection will be used.
+# "prefix"  - Prefix
+# If this is commented out, automatic detection will be attempted.
+# Note that automatic detection does not work in a prefix environment.
 #
 # This should be set to the value representing the environment this file is
 # PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
+rc_sys="@RC_SYS_DEFAULT@"
 

etc/rc.conf.Linux

@@ -5,15 +5,18 @@
 # ""        - nothing special
 # "lxc"     - Linux Containers
 # "openvz"  - Linux OpenVZ
+# "prefix"  - Prefix
 # "uml"     - Usermode Linux
 # "vserver" - Linux vserver
 # "xen0"    - Xen0 Domain
 # "xenU"    - XenU Domain
-# If this is commented out, automatic detection will be used.
+# If this is commented out, automatic detection will be attempted.
+# Note that autodetection will not work in a prefix environment or in a
+# linux container.
 #
 # This should be set to the value representing the environment this file is
 # PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
+rc_sys="@RC_SYS_DEFAULT@"
 
 # This is the number of tty's used in most of the rc-scripts (like
 # consolefont, numlock, etc ...)

etc/rc.conf.NetBSD

@@ -3,11 +3,13 @@
 
 # This is the subsystem type. Valid options on NetBSD:
 # ""        - nothing special
+# "prefix"  - Prefix
 # "xen0"    - Xen0 Domain
 # "xenU"    - XenU Domain
-# If this is commented out, automatic detection will be used.
+# If this is commented out, automatic detection will be attempted.
+# Note that automatic detection does not work in a prefix environment.
 #
 # This should be set to the value representing the environment this file is
 # PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
+rc_sys="@RC_SYS_DEFAULT@"
 

etc/rc.conf.in

@@ -1,18 +1,8 @@
 # Global OpenRC configuration settings
 
-# Set to "YES" if you want the rc system to try and start services
-# in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with its name as the output will get
-# jumbled up.
-# WARNING: whilst we have improved parallel, it can still potentially lock
-# the boot process. Don't file bugs about this unless you can supply
-# patches that fix it without breaking other things!
-#rc_parallel="NO"
-
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
-# this feature. This feature is automatically disabled if rc_parallel is
-# set to YES.
+# this feature.
 #rc_interactive="YES"
 
 # If we need to drop to a shell, you can specify it here.

init.d/.gitignore

@@ -11,7 +11,6 @@ network
 root
 savecache
 swap
-swapfiles
 sysctl
 urandom
 devfs

init.d/Makefile

@@ -1,7 +1,7 @@
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
-	network.in root.in savecache.in staticroute.in swap.in swapfiles.in \
-	swclock.in sysctl.in urandom.in ${SRCS-${OS}}
+	network.in root.in savecache.in staticroute.in swap.in swclock.in \
+	sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
 INSTALLAFTER=	_installafter_net.lo

init.d/adjkerntz.in

@@ -22,7 +22,7 @@ depend()
 	   [ "$clock" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
 		need root
 	fi
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start()

init.d/bootmisc.in

@@ -7,7 +7,12 @@ depend()
 	need localmount
 	before logger
 	after clock sysctl
-	keyword -timeout
+	keyword -prefix -timeout
+}
+
+dir_writable()
+{
+	mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
 }
 
 : ${wipe_tmp:=${WIPE_TMP:-yes}}
@@ -20,7 +25,7 @@ cleanup_tmp_dir()
 	if ! [ -d "$dir" ]; then
 		mkdir -p "$dir" || return $?
 	fi
-	checkpath -W "$dir" || return 1
+	dir_writable "$dir" || return 1
 	chmod a+rwt "$dir" 2> /dev/null
 	cd "$dir" || return 1
 	if yesno $wipe_tmp; then
@@ -117,7 +122,7 @@ start()
 		migrate_to_run	/var/run /run
 	fi
 
-	if checkpath -W /var/run; then
+	if dir_writable /var/run; then
 		ebegin "Creating user login records"
 		local xtra=
 		[ "$RC_UNAME" = NetBSD ] && xtra=x
@@ -159,7 +164,7 @@ start()
 		cleanup_tmp_dir "$tmp"
 	done
 
-	if checkpath -W /tmp; then
+	if dir_writable /tmp; then
 		# Make sure our X11 stuff have the correct permissions
 		# Omit the chown as bootmisc is run before network is up
 		# and users may be using lame LDAP auth #139411
@@ -172,7 +177,7 @@ start()
 	fi
 
 	if yesno $log_dmesg; then
-		if $logw || checkpath -W /var/log; then
+		if $logw || dir_writable /var/log; then
 			# Create an 'after-boot' dmesg log
 			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
 				dmesg > /var/log/dmesg
@@ -181,6 +186,7 @@ start()
 		fi
 	fi
 
+	[ -w /etc/nologin ] && rm -f /etc/nologin
 	return 0
 }
 

init.d/consolefont.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc
-	keyword -openvz -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()
@@ -54,7 +54,7 @@ start()
 	eend $retval
 
 	# Store the last font so we can use it ASAP on boot
-	if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then
+	if [ $retval -eq 0 -a -w "$RC_LIBEXECDIR" ]; then
 		mkdir -p "$RC_LIBEXECDIR"/console
 		for font in /usr/share/consolefonts/"$consolefont".*; do
 			:

init.d/devd.in

@@ -10,7 +10,7 @@ depend() {
 	need localmount
 	after bootmisc
 	before net.lo0
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start_pre() {

init.d/devfs.in

@@ -6,7 +6,7 @@ description="Mount system critical filesystems in /dev."
 
 depend() {
 	use dev
-	keyword -vserver
+	keyword -prefix -vserver
 }
 
 start() {

init.d/dumpon.in

@@ -6,7 +6,7 @@ description="Configures a specific kernel dump device."
 
 depend() {
 	need swap
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start() {

init.d/fsck.in

@@ -9,7 +9,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -timeout -vserver -lxc
+	keyword -jail -openvz -prefix -timeout -vserver -lxc
 }
 
 _abort() {
@@ -71,12 +71,7 @@ start()
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
-		local skiptypes x
-		for x in $net_fs_list $extra_net_fs_list; do
-			skiptypes="${skiptypes}no${x},"
-		done
-		skiptypes="${skiptypes}noopts=_netdev"
-		fsck_opts="$fsck_opts -C0 -T -t $skiptypes"
+		fsck_opts="$fsck_opts -C0 -T"
 		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
 			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then

init.d/hostid.in

@@ -9,7 +9,7 @@ depend()
 {
 	use root
 	before devd net
-	keyword -jail
+	keyword -jail -prefix
 }
 
 _set()

init.d/hostname.in

@@ -5,38 +5,12 @@
 description="Sets the hostname of the machine."
 
 depend() {
-	need root
+	keyword -prefix -lxc
 }
 
 start()
 {
 	hostname=${hostname-${HOSTNAME-localhost}}
-	out=$hostname
-	short=${hostname%%.*}
-	if [ "$short" != "$hostname" ]; then
-		out="$out $short"
-	fi
-	if [ "$nisdomainname" != "" ]; then
-		ebegin "Setting NIS domain name to $nisdomainname"
-		nisdomainname $nisdomainname
-		eend $? "Failed to set the NIS domain name"
-	fi
-	if [ "$short" != "localhost" ]; then
-		out="$out localhost"
-	fi
-	if [ "$hostname" != "localhost.localdomain" ]; then
-		out="$out localhost.localdomain"
-	fi
-	[ -n "$aliases" ] && out="$out $aliases"
-	ebegin "Configuring /etc/hosts"
-	[ -e /etc/hosts ] && sed -i -e '/[[:space:]]*127.0.0.1[[:space:]]/d' -e '/[[:space:]]*::1[[:space:]]/d' /etc/hosts
-	cat <<END >> /etc/hosts
-127.0.0.1	$out
-::1		$out
-END
-	chmod 0644 /etc/hosts
-	eend $?
-	[ "$RC_SYS" = "LXC" ] && return 0
 	ebegin "Setting hostname to $hostname"
 	hostname "$hostname"
 	eend $? "Failed to set the hostname"

init.d/hwclock.in

@@ -28,7 +28,7 @@ depend()
 	else
 		before *
 	fi
-	keyword -openvz -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 setupopts()
@@ -94,7 +94,7 @@ start()
 		"$utc_cmd" != --utc -o \
 		-n "$clock_args" ];
 	then
-		if yesno ${clock_hctosys:-YES}; then
+		if yesno $clock_hctosys; then
 			_hwclock --hctosys $utc_cmd $clock_args
 		else
 			_hwclock --systz $utc_cmd $clock_args
@@ -111,7 +111,7 @@ stop()
 {
 	# Don't tweak the hardware clock on LiveCD halt.
 	[ -n "$CDBOOT" ] && return 0
-	yesno ${clock_systohc:-YES} || return 0
+	yesno $clock_systohc || return 0
 
 	local retval=0 errstr=""
 	setupopts

init.d/keymaps.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()
@@ -63,7 +63,7 @@ start()
 	fi
 
 	# Save the keymapping for use immediately at boot
-	if checkpath -W "$RC_LIBEXECDIR"; then
+	if [ -w "$RC_LIBEXECDIR" ]; then
 		mkdir -p "$RC_LIBEXECDIR"/console
 		dumpkeys >"$RC_LIBEXECDIR"/console/keymap
 	fi

init.d/killprocs.in

@@ -4,6 +4,11 @@
 
 description="Kill all processes so we can unmount disks cleanly."
 
+depend()
+{
+	keyword -prefix
+}
+
 start()
 {
 	ebegin "Terminating remaining processes"

init.d/localmount.in

@@ -9,7 +9,7 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -jail -vserver -lxc
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()
@@ -33,7 +33,6 @@ start()
 
 stop()
 {
-	yesno $RC_GOINGDOWN || return 0
 	# We never unmount / or /dev or $RC_SVCDIR
 
 	# Bug 381783
@@ -48,7 +47,7 @@ stop()
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
-		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*|/usr"
+		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
 	fi
 	no_umounts_r="^($no_umounts_r)$"
 

init.d/mixer.in

@@ -7,7 +7,7 @@ extra_commands="restore"
 depend()
 {
 	need localmount
-	keyword -jail
+	keyword -jail -prefix
 }
 
 restore()

init.d/modules.in

@@ -7,7 +7,7 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword -openvz -vserver -lxc
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/mount-ro.in

@@ -7,7 +7,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 depend()
 {
 	need killprocs savecache
-	keyword -openvz -vserver -lxc
+	keyword -prefix -openvz -vserver -lxc
 }
 
 start()
@@ -23,7 +23,7 @@ start()
 	# Bug 381783
 	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
 
-	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
+	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${rc_svcdir}" x= fs=
 	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
 	local IFS="$IFS:"

init.d/moused.in

@@ -16,7 +16,7 @@ depend()
 {
 	need localmount
 	after bootmisc
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start()

init.d/mtab.in

@@ -7,6 +7,7 @@ description="Update /etc/mtab to match what the kernel knows about"
 depend()
 {
 	need root
+	keyword -prefix
 }
 
 start()

init.d/net.lo.in

@@ -19,18 +19,13 @@ depend()
 	local IFVAR=$(shell_var "${IFACE}")
 
 	need localmount
-	if [ "$RC_UNAME" = Linux ]; then
-		need sysfs
-	fi
 	after bootmisc
-	keyword -jail -vserver
+	provide net
+	keyword -jail -prefix -vserver
 
 	case "${IFACE}" in
-		lo|lo0) provide lo;;
-		*)
-			after net.lo net.lo0 dbus
-			provide net
-			;;
+		lo|lo0);;
+		*) after net.lo net.lo0 dbus;;
 	esac
 
 	if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then
@@ -42,8 +37,6 @@ depend()
 		eval prov=\$rc_${dep}_${IFVAR}
 		if [ -n "${prov}" ]; then
 			${dep} ${prov}
-			ewarn "rc_${dep}_${IFVAR} is deprecated."
-			ewarn "Please use rc_net_${IFVAR}_${dep} instead."
 		fi
 	done
 }

init.d/netmount.in

@@ -35,7 +35,7 @@ depend()
 	need net $pmap
 	use afc-client amd autofs openvpn
 	use dns nfs nfsmount portmap rpcbind rpc.statd rpc.lockd
-	keyword -jail -vserver
+	keyword -jail -prefix -vserver
 }
 
 start()

init.d/network.in

@@ -13,7 +13,7 @@ depend()
 	need localmount
 	after bootmisc
 	provide net
-	keyword -jail -vserver
+	keyword -jail -prefix -vserver
 }
 
 uniqify()

init.d/newsyslog.in

@@ -7,6 +7,7 @@ required_files="/etc/newsyslog.conf"
 depend()
 {
 	need localmount
+	keyword -prefix
 }
 
 start()

init.d/numlock.in

@@ -9,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -openvz -vserver -lxc
+	keyword -openvz -prefix -vserver -lxc
 }
 
 _setleds()

init.d/pf.in

@@ -11,7 +11,7 @@ extra_started_commands="reload"
 
 depend() {
 	need localmount
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start()

init.d/powerd.in

@@ -12,7 +12,7 @@ depend()
 	need localmount
 	use logger
 	after bootmisc
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start_pre()

init.d/procfs.in

@@ -8,7 +8,7 @@ depend()
 {
 	use modules devfs
 	need localmount
-	keyword -openvz -vserver -lxc
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()
@@ -20,29 +20,6 @@ start()
 
 	[ -e /proc/filesystems ] || return 0
 
-	# Setup Kernel Support for miscellaneous Binary Formats
-	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
-		if grep -qs binfmt_misc /proc/filesystems; then
-			ebegin "Mounting misc binary format filesystem"
-			mount -t binfmt_misc -o nodev,noexec,nosuid \
-				binfmt_misc /proc/sys/fs/binfmt_misc
-			if eend $? ; then
-				local fmts
-				ebegin "Loading custom binary format handlers"
-				fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
-					/run/binfmt.d/*.conf \
-					@SYSCONFDIR@/binfmt.d/*.conf \
-					""/usr/lib/binfmt.d/*.conf)
-				if [ -n "${fmts}" ]; then
-					echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
-				fi
-				eend $?
-			fi
-		fi
-	fi
-
-	[ "$RC_SYS" = "OPENVZ" ] && return 0
-
 	# Check what USB fs the kernel support.  Currently
 	# 2.5+ kernels, and later 2.4 kernels have 'usbfs',
 	# while older kernels have 'usbdevfs'.
@@ -60,6 +37,27 @@ start()
 		fi
 	fi
 
+	# Setup Kernel Support for miscellaneous Binary Formats
+	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
+		if grep -qs binfmt_misc /proc/filesystems; then
+			ebegin "Mounting misc binary format filesystem"
+			mount -t binfmt_misc -o nodev,noexec,nosuid \
+				binfmt_misc /proc/sys/fs/binfmt_misc
+			if eend $? ; then
+				local fmts
+				ebegin "Loading custom binary format handlers"
+				fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
+					/run/binfmt.d/*.conf \
+					"/etc"/binfmt.d/*.conf \
+					""/usr/lib/binfmt.d/*.conf)
+				if [ -n "${fmts}" ]; then
+					echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
+				fi
+				eend $?
+			fi
+		fi
+	fi
+
 	# Setup Kernel Support for SELinux
 	if [ -d /selinux ] && ! mountinfo -q /selinux; then
 		if grep -qs selinuxfs /proc/filesystems; then

init.d/rc-enabled.in

@@ -7,6 +7,7 @@ depend()
 	need localmount net
 	after *
 	before local
+	keyword -prefix
 }
 
 start()

init.d/root.in

@@ -7,47 +7,26 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword -jail -openvz -vserver -lxc
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()
 {
 	case ",$(fstabinfo -o /)," in
-		*,ro,*)
-		;;
-		*)
-			# Check if the rootfs isn't already writable.
-			if checkpath -W /; then
-				rm -f /fastboot /forcefsck
-			else
-				ebegin "Remounting root filesystem read/write"
-				case "$RC_UNAME" in
-					Linux)
-						mount -n -o remount,rw /
-					;;
-					*)
-						mount -u -o rw /
-					;;
-				esac
-				eend $? "Root filesystem could not be mounted read/write"
-				if [ $?  -eq 0 ]; then
-					rm -f /fastboot /forcefsck
-				fi
-			fi
-		;;
+	*,ro,*) return 0;;
 	esac
 
-	ebegin "Remounting filesystems"
-	local mountpoint
-	for mountpoint in $(fstabinfo); do
-		case "${mountpoint}" in
-			/)
-			;;
-			/*)
-				mountinfo -q "${mountpoint}" && \
-					fstabinfo --remount "${mountpoint}"
-			;;
-		esac
-	done
-	eend 0
+	if echo 2>/dev/null >/.test.$$; then
+		rm -f /.test.$$ /fastboot /forcefsck
+		return 0
+	fi
+
+	ebegin "Remounting root filesystem read/write"
+	case "$RC_UNAME" in
+		Linux)	mount -n -o remount,rw /;;
+		*)	mount -u -o rw /;;
+	esac
+	if eend $? "Root filesystem could not be mounted read/write"; then
+		rm -f /fastboot /forcefsck
+	fi
 }

init.d/savecore.in

@@ -7,7 +7,7 @@ description="Saves a kernel dump."
 depend()
 {
 	need localmount
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start()

init.d/staticroute.in

@@ -12,7 +12,7 @@ depend()
 {
 	provide net
 	use network
-	keyword -jail -vserver
+	keyword -jail -prefix -vserver
 }
 
 pre_flight_checks()

init.d/swap-blk.in

@@ -5,7 +5,7 @@
 depend()
 {
 	before fsck
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start()

init.d/swap.in

@@ -4,15 +4,14 @@
 
 depend()
 {
-	before localmount
-	keyword -jail -openvz -vserver -lxc
+	need localmount
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()
 {
 	ebegin "Activating swap devices"
 	case "$RC_UNAME" in
-		Linux)		swapon -a -e >/dev/null;;
 		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
 		*)		swapon -a >/dev/null;;
 	esac
@@ -24,7 +23,7 @@ stop()
 	ebegin "Deactivating swap devices"
 
 	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
-	# occur. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
+	# occure. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
 	cd "$RC_SVCDIR"
 	umount -a -t tmpfs 2>/dev/null
 

init.d/swapfiles.in

@@ -1,45 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-depend()
-{
-	need localmount
-	keyword -jail -openvz -prefix -vserver -lxc
-}
-
-start()
-{
-	ebegin "Activating additional swap space"
-	case "$RC_UNAME" in
-		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
-		*)		swapon -a >/dev/null;;
-	esac
-	eend 0 # If swapon has nothing todo it errors, so always return 0
-}
-
-stop()
-{
-	ebegin "Deactivating additional swap space"
-
-	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
-	# occur. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
-	# fixme: Do we need this here since we are only unmounting swap files
-	# and loopback swap?
-	cd "$RC_SVCDIR"
-	umount -a -t tmpfs 2>/dev/null
-
-	case "$RC_UNAME" in
-		Linux)
-			while read filename type rest; do
-				case "$type" in
-					file) swapoff $filename >/dev/null;;
-				esac
-				case "$filename" in
-					/dev/loop*) swapoff $filename >/dev/null;;
-				esac
-			done < /proc/swaps
-			;;
-	esac
-	eend 0
-}

init.d/swclock.in

@@ -8,7 +8,7 @@ depend()
 {
 	before *
 	provide clock
-	keyword -openvz -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 # swclock is an OpenRC built in

init.d/syscons.in

@@ -4,7 +4,7 @@
 
 depend() {
 	need localmount
-	keyword -jail
+	keyword -jail -prefix
 }
 
 start() {

init.d/sysctl.BSD.in

@@ -5,6 +5,7 @@
 depend()
 {
 	before bootmisc logger
+	keyword -prefix
 }
 
 start()
@@ -13,7 +14,7 @@ start()
 	local retval=0 var= comments= conf=
 	ebegin "Configuring kernel parameters"
 	eindent
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
+	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
 		if [ -r "$conf" ]; then
 			vebegin "applying $conf"
 			while read var comments; do

init.d/sysctl.Linux.in

@@ -5,7 +5,7 @@
 depend()
 {
 	before bootmisc logger
-	keyword -lxc -vserver
+	keyword -prefix -vserver
 }
 
 start()
@@ -15,20 +15,12 @@ start()
 	ebegin "Configuring kernel parameters"
 	eindent
 
-	# default sysctl System V max shared memory to 1/4 of RAM:
-	mem_bytes=`awk '/MemTotal:/ { printf "%0.f",$2 * 1024}' /proc/meminfo`
-	mem_max=`expr $mem_bytes / 4` 
-	page_size=`getconf PAGE_SIZE`
-	shmall=`expr $mem_bytes / $page_size`
-	sysctl kernel.shmmax=$mem_max > /dev/null
-	sysctl kernel.shmall=$shmall > /dev/null
-
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
+	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
 		if [ -r "$conf" ]; then
 			vebegin "applying $conf"
-			if ! err=$(sysctl -p "$conf" 2>&1 >/dev/null) ; then
+			if ! err=$(sysctl -q -p "$conf" 2>&1) ; then
 				errs="${errs} ${err}"
-				sysctl -e -p "${conf}" >/dev/null
+				sysctl -q -e -p "${conf}"
 			fi
 			veend $? || retval=1
 		fi

init.d/sysfs.in

@@ -6,7 +6,7 @@ description="Mount the sys filesystem."
 
 depend()
 {
-	keyword -vserver
+	keyword -prefix -vserver
 }
 
 mount_sys()
@@ -77,12 +77,6 @@ mount_cgroups()
 	yesno ${rc_cgroups:-YES} && [ -e /proc/cgroups ] && \
 		mountinfo -q /sys/fs/cgroup || return 0
 
-	local agent="@LIBEXECDIR@/sh/cgroup-release-agent.sh"
-	mkdir /sys/fs/cgroup/openrc
-	mount -n -t cgroup \
-		-o none,nodev,noexec,nosuid,name=openrc,release_agent="$agent" \
-		openrc /sys/fs/cgroup/openrc
-	echo 1 > /sys/fs/cgroup/openrc/notify_on_release
 	while read name hier groups enabled rest; do
 		case "${enabled}" in
 			1)	mkdir /sys/fs/cgroup/${name}

init.d/syslogd.in

@@ -16,4 +16,5 @@ depend()
 	use net newsyslog
 	need localmount
 	after bootmisc
+	keyword -prefix
 }

init.d/termencoding.in

@@ -9,8 +9,8 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
-	keyword -lxc -openvz -uml -vserver -xenu
-	use root
+	keyword -openvz -prefix -uml -vserver -xenu
+	need root
 	after bootmisc
 }
 
@@ -35,7 +35,7 @@ start()
 	done
 
 	# Save the encoding for use immediately at boot
-	if checkpath -W "$RC_LIBEXECDIR"; then
+	if [ -w "$RC_LIBEXECDIR" ]; then
 		mkdir -p "$RC_LIBEXECDIR"/console
 		if yesno ${unicode:-${UNICODE}}; then
 			echo "" > "$RC_LIBEXECDIR"/console/unicode

init.d/ttys.in

@@ -5,6 +5,7 @@
 depend()
 {
 	after fsck
+	keyword -prefix
 }
 
 start()

init.d/urandom.in

@@ -8,7 +8,7 @@ description="Initializes the random number generator."
 depend()
 {
 	need localmount
-	keyword -jail -openvz
+	keyword -jail -openvz -prefix
 }
 
 save_seed()

init.d/wscons.in

@@ -5,6 +5,7 @@
 depend()
 {
 	need localmount
+	keyword -prefix
 }
 
 start()

man/Makefile

@@ -27,7 +27,7 @@ install:
 	for man in ${MAN3}; do \
 		${INSTALL} -m ${MANMODE} "$$man" ${DESTDIR}/${MANDIR}/man3 || exit $$?; \
 		${MAKE_LINKS} \
-	done
+	done	
 	${INSTALL} -d ${DESTDIR}/${MANDIR}/man8
 	for man in ${MAN8}; do \
 		${INSTALL} -m ${MANMODE} "$$man" ${DESTDIR}/${MANDIR}/man8 || exit $$?; \

man/einfo.3

@@ -115,7 +115,7 @@ to true.
 These functions are designed to output a whole line, so they also
 append a newline to the string. To stop this behaviour, you can use the
 functions
-.Fn einfon ,
+.Fn einfon , 
 .Fn ewarnn ,
 .Fn eerrorn ,
 .Fn einfovn ,
@@ -149,7 +149,7 @@ does the same as
 .Fn eend
 but prints
 .Fa msg
-instead of ok or !! in the color
+instead of ok or !! in the color 
 .Fa color
 at the column
 .Fa col .

man/rc-service.8

@@ -26,7 +26,7 @@
 .Os OpenRC
 .Sh NAME
 .Nm rc-service
-.Nd locate and run an OpenRC service with the given arguments
+.Nd locate and run an OpenRC service with the given arguments 
 .Sh SYNOPSIS
 .Nm
 .Op Fl i , -ifexists
@@ -41,7 +41,7 @@
 .Fl r , -resolve
 .Ar service
 .Sh DESCRIPTION
-Service scripts could be in different places on different systems.
+Service scripts could be in different places on different systems. 
 .Nm
 locates the specified service and runs it with the given arguments.
 If

man/rc-status.8

@@ -33,8 +33,8 @@
 .Op Ar runlevel
 .Sh DESCRIPTION
 .Nm
-gathers and displays information about the status of services
-in different runlevels.  The default behavior is to show information
+gathers and displays information about the status of services 
+in different runlevels.  The default behavior is to show information 
 about the current runlevel and any unassigned services that are not stopped,
 but any runlevel can be quickly examined.
 .Pp

man/rc-update.8

@@ -26,7 +26,7 @@
 .Os OpenRC
 .Sh NAME
 .Nm rc-update
-.Nd add and remove services to and from a runlevel
+.Nd add and remove services to and from a runlevel 
 .Sh SYNOPSIS
 .Nm
 .Op Fl s , -stack
@@ -44,7 +44,7 @@
 .Ar show
 .Op Ar runlevel ...
 .Sh DESCRIPTION
-OpenRC uses named runlevels.  Rather than editing some obscure
+OpenRC uses named runlevels.  Rather than editing some obscure 
 file or managing a directory of symlinks,
 .Nm
 exists to quickly add or delete services to and from from different runlevels.

man/rc_deptree.3

@@ -32,7 +32,7 @@
 .Sh LIBRARY
 Run Command library (librc, -lrc)
 .Sh SYNOPSIS
-.In rc.h
+.In rc.h 
 .Ft bool Fn rc_deptree_update void
 .Ft bool Fn rc_deptree_update_needed void
 .Ft RC_DEPTREE Fn rc_deptree_load void
@@ -77,7 +77,7 @@ loads the deptree and returns a pointer to it which needs to be freed by
 when done.
 .Pp
 .Fn rc_deptree_depend ,
-.Fn rc_deptree_depends
+.Fn rc_deptree_depends 
 and
 .Fn rc_deptree_order
 return a list of services from the

man/rc_runlevel.3

@@ -31,7 +31,7 @@
 .Sh LIBRARY
 Run Command library (librc, -lrc)
 .Sh SYNOPSIS
-.In rc.h
+.In rc.h 
 .Ft "char *" Fn rc_runlevel_get void
 .Ft bool Fn rc_runlevel_exists
 .Ft "RC_STRINGLIST *" Fn rc_runlevel_list void

man/rc_service.3

@@ -37,7 +37,7 @@
 .Sh LIBRARY
 Run Command library (librc, -lrc)
 .Sh SYNOPSIS
-.In rc.h
+.In rc.h 
 .Ft bool Fn rc_service_add "const char *runlevel" "const char *service"
 .Ft bool Fn rc_service_delete "const char *runlevel" "const char *service"
 .Ft bool Fo rc_service_daemon_set

man/rc_stringlist.3

@@ -32,7 +32,7 @@
 Run Command library (librc, -lrc)
 .Sh SYNOPSIS
 .In rc.h
-.Ft "RC_STRINGLIST *" Fn rc_stringlist_new void
+.Ft "RC_STRINGLIST *" Fn rc_stringlist_new void 
 .Ft "RC_STRING *" Fn rc_stringlist_add "RC_STRINGLIST *list" "const char *item"
 .Ft "RC_STRING *" Fn rc_stringlist_addu "RC_STRINGLIST *list" "const char *item"
 .Ft bool Fn rc_stringlist_delete RC_STRINGLIST "const char *item"

man/runscript.8

@@ -25,14 +25,13 @@
 .Dt RUNSCRIPT 8 SMM
 .Os OpenRC
 .Sh NAME
-.Nm runscript
+.Nm runscript 
 .Nd a means of hooking shell commands into a service
 .Sh SYNOPSIS
 .Nm
 .Op Fl D , -nodeps
 .Op Fl d , -debug
 .Op Fl s , -ifstarted
-.Op Fl S , -ifstopped
 .Op Fl Z , -dry-run
 .Op Ar command ...
 .Sh DESCRIPTION
@@ -77,8 +76,6 @@ Set xtrace on in the shell to assist in debugging.
 Ignore all dependency information the service supplies.
 .It Fl s , -ifstarted
 Only run the command if the service has been started.
-.It Fl S , -ifstopped
-Only run the command if the service has been stopped.
 .It Fl q , -quiet
 Turns off all informational output the service generates.
 Output from any non OpenRC commands is not affected.
@@ -92,8 +89,7 @@ or stopping them.
 The following variables affect the service script:
 .Bl -tag -width "RC_DEFAULTLEVEL"
 .It Ar extra_commands
-Space separated list of extra commands the service defines. These should
-not depend on the service being stopped or started.
+Space separated list of extra commands the service defines.
 .It Ar extra_started_commands
 Space separated list of extra commands the service defines. These only work if
 the service has already been started.
@@ -112,11 +108,6 @@ Daemon to start or stop via
 if no start or stop function is defined by the service.
 .It Ar command_args
 List of arguments to pass to the daemon when starting.
-.It Ar command_background
-Set this to "true", "yes" or "1" (case-insensitive) to force the daemon into
-the background. This implies the "--make-pidfile" and "--pidfile" option of
-.Xr start-stop-daemon 8
-so the pidfile variable must be set.
 .It Ar pidfile
 Pidfile to use for the above defined command.
 .It Ar name
@@ -124,10 +115,6 @@ Display name used for the above defined command.
 .It Ar retry
 Retry schedule to use when stopping the daemon. It can either be a
 timeout in seconds or multiple signal/timeout pairs (like SIGTERM/5).
-.It Ar required_dirs
-A list of directories which must exist for the service to start.
-.It Ar required_files
-A list of files which must exist for the service to start.
 .El
 .Sh DEPENDENCIES
 You should define a
@@ -140,7 +127,7 @@ Here is a list of the functions you can use in a
 .Ic depend
 function. You simply pass the names of the services to it to add to that
 dependency type, or prefix it with ! to remove it.
-.Bl -tag -width "RC_DEFAULTLEVEL"
+.Bl -tag -width "RC_DEFAULTLEVEL" 
 .It Ic need
 The service will refuse to start until needed services have started and it
 will refuse to stop until any services that need it have stopped.
@@ -172,14 +159,16 @@ Other services should wait indefinitely for this service to start. Use
 this keyword if your service may take longer than 60 seconds to start.
 .It Dv -jail
 When in a jail, exclude this service from any dependencies. The service can
-still be run directly. Set via
-.Ic rc_sys
-in
+still be run directly. Set via 
+.Ic rc_sys 
+in 
 .Pa /etc/rc.conf
 .It Dv -lxc
 Same as -jail, but for Linux Resource Containers (LXC).
 .It Dv -openvz
 Same as -jail, but for OpenVZ systems.
+.It Dv -prefix
+Same as -jail, but for Prefix systems.
 .It Dv -uml
 Same as -jail, but for UML systems.
 .It Dv -vserver
@@ -318,11 +307,6 @@ Mark the service as inactive.
 .Xc
 Checks to see if the path exists, is of the right type, owned by the right
 people and has the correct access modes. If not, then it corrects the path.
-.It Ic checkpath
-.Op Fl W , -writable
-.Ar path
-.Xc
-checks to see if the path is writable.
 .It Ic yesno Ar value
 If
 .Ar value
@@ -331,18 +315,11 @@ matches YES, TRUE, ON or 1 regardless of case then we return 0, otherwise 1.
 .Sh ENVIRONMENT
 .Nm
 sets the following environment variables for use in the service scripts:
-.Bl -tag -width "RC_DEFAULTLEVEL"
+.Bl -tag -width "RC_DEFAULTLEVEL" 
 .It Va RC_SVCNAME
 Name of the service.
 .It Va RC_RUNLEVEL
-Current runlevel that rc is in. Note that, in OpenRC, the reboot
-runlevel is mapped to the shutdown runlevel. This was done because most
-services do not need to know if a system is shutting down or rebooting.
-If you are writing a service that does need to know this, see the
-RC_REBOOT variable.
-.It Va RC_REBOOT
-This variable contains YES if the system is rebooting. If your service
-needs to know the system is rebooting, you should test this variable.
+Current runlevel that rc is in.
 .It Va RC_BOOTLEVEL
 Boot runlevel chosen. Default is boot.
 .It Va RC_DEFAULTLEVEL
@@ -388,8 +365,9 @@ rc_provide_tap1="!net"
 # To put in in /etc/rc.conf you would do it like this
 rc_net_tap1_provide="!net"
 
-# It's also possible to negate keywords.
-rc_keyword="-keyword"
+# It's also possible to negate keywords. This is mainly useful for prefix
+# users testing OpenRC.
+rc_keyword="!noprefix"
 .Ed
 .Sh EXAMPLES
 .Pp
@@ -432,7 +410,7 @@ depend()
 	_need=`service_get_value need`
     else
 	if _need_dbus; then
-	   _need="${_need} dbus"
+	   _need="${_need} dbus" 
 	fi
     fi
     need ${_need}

man/start-stop-daemon.8

@@ -58,7 +58,7 @@ is used in an OpenRC service, then OpenRC can in turn check to see if the
 daemon is still running. If not, then the service is marked as crashed.
 .Pp
 Here are the options to specify the daemon and how it should start or stop:
-.Bl -tag -width indent
+.Bl -tag -width indent 
 .It Fl x , -exec Ar daemon
 The
 .Ar daemon

mk/os-Linux.mk

@@ -4,5 +4,5 @@
 SFX=		.Linux.in
 PKG_PREFIX?=	/usr
 
-CPPFLAGS+=	-D_BSD_SOURCE -D_XOPEN_SOURCE=700
+CPPFLAGS+=	-D_BSD_SOURCE -D_XOPEN_SOURCE=600
 LIBDL=		-Wl,-Bdynamic -ldl

mk/scripts.mk

@@ -12,7 +12,7 @@ _PKG_SED:=		$(shell ${_PKG_SED_SH})
 _LCL_SED_SH=		if test "${PREFIX}" = "${LOCAL_PREFIX}"; then echo "-e 's:@LOCAL_PREFIX@::g'"; else echo "-e 's:@LOCAL_PREFIX@:${LOCAL_PREFIX}:g'"; fi
 _LCL_SED:=		$(shell ${_LCL_SED_SH})
 
-SED_REPLACE=		-e 's:@SHELL@:${SH}:g' -e 's:@LIB@:${LIBNAME}:g' -e 's:@SYSCONFDIR@:${SYSCONFDIR}:g' -e 's:@LIBEXECDIR@:${LIBEXECDIR}:g' -e 's:@PREFIX@:${PREFIX}:g' ${_PKG_SED} ${_LCL_SED}
+SED_REPLACE=		-e 's:@SHELL@:${SH}:g' -e 's:@LIB@:${LIBNAME}:g' -e 's:@SYSCONFDIR@:${SYSCONFDIR}:g' -e 's:@LIBEXECDIR@:${LIBEXECDIR}:g' -e 's:@PREFIX@:${PREFIX}:g' -e 's:@RC_SYS_DEFAULT@:${MKRCSYS}:g' ${_PKG_SED} ${_LCL_SED}
 
 # Tweak our shell scripts
 %.sh: %.sh.in
@@ -53,6 +53,6 @@ check test::
 # so we ensure that it has a bogus argument
 CLEANFILES+=	${OBJS}
 clean:
-	@if test -n "${CLEANFILES}"; then echo "rm -f ${CLEANFILES}"; rm -f ${CLEANFILES}; fi
+	@if test -n "${CLEANFILES}"; then echo "rm -f ${CLEANFILES}"; rm -f ${CLEANFILES}; fi 
 
 include ${MK}/gitignore.mk

mk/subdir.mk

@@ -4,7 +4,7 @@
 # Released under the 2-clause BSD license.
 
 _+_ ?= +
-ECHODIR ?= echo
+ECHODIR ?= echo 
 _SUBDIR = @${_+_}for x in ${SUBDIR}; do \
 	if test -d $$x; then \
 	${ECHODIR} "===> ${DIRPRFX}$$x (${@:realinstall=install})"; \

mk/sys.mk

@@ -10,7 +10,7 @@ RANLIB?=		ranlib
 SED?=			sed
 SH=			/bin/sh
 
-PREFIX?=
+PREFIX?=	
 _UPREFIX_SH=		case "${PREFIX}" in "") echo /usr;; *) echo "${PREFIX}";; esac
 _UPREFIX:=		$(shell ${_UPREFIX_SH})
 UPREFIX=		${_UPREFIX}
@@ -22,7 +22,6 @@ SYSCONFDIR?=		${PREFIX}/etc
 INITDIR?=		${SYSCONFDIR}/init.d
 CONFDIR?=		${SYSCONFDIR}/conf.d
 LOCALDIR?=		${SYSCONFDIR}/local.d
-SYSCTLDIR?=		${SYSCONFDIR}/sysctl.d
 
 BINDIR?=		${PREFIX}/sbin
 BINMODE?=		0755
@@ -44,6 +43,6 @@ MANDIR?=		${MANPREFIX}/man
 MANMODE?=		0444
 
 DOCDIR?=		${UPREFIX}/share/doc
-DOCMODE?=		0644
+DOCMODE?=		0644	
 
 CONFMODE?=		0644

net/Makefile

@@ -13,7 +13,7 @@ SRCS-Linux=	iwconfig.sh.in
 INC-Linux=	adsl.sh apipa.sh arping.sh bonding.sh br2684ctl.sh bridge.sh \
 		ccwgroup.sh clip.sh ethtool.sh iproute2.sh ifplugd.sh ip6to4.sh \
 		ipppd.sh iwconfig.sh netplugd.sh pppd.sh pump.sh tuntap.sh udhcpc.sh \
-		vlan.sh macvlan.sh ip6rd.sh
+		vlan.sh macvlan.sh
 
 SRCS-NetBSD=
 INC-NetBSD=	ifwatchd.sh

net/bonding.sh

@@ -105,7 +105,7 @@ bonding_pre_start()
 		local oiface
 		oiface=$IFACE
 		if [ -n "${primary}" ]; then
-			IFACE=$primary
+			IFACE=$primary 
 			_down
 			IFACE=$oiface
 			echo "+${primary}" >$sys_bonding_path/slaves
@@ -114,7 +114,7 @@ bonding_pre_start()
 		for s in ${slaves}; do
 			[ "${s}" = "${primary}" ] && continue
 			if ! grep -q ${s} $sys_bonding_path/slaves; then
-				IFACE=$s
+				IFACE=$s 
 				_down
 				IFACE=$oiface
 				echo "+${s}" >$sys_bonding_path/slaves

net/ifconfig.sh.Linux.in

@@ -3,7 +3,7 @@
 
 ifconfig_depend()
 {
-	program /sbin/ifconfig /bin/ifconfig
+	program /sbin/ifconfig
 	provide interface
 }
 
@@ -19,24 +19,24 @@ _down()
 
 _exists()
 {
-	[ -e /sys/class/net/"$IFACE" ]
+	grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/dev
 }
 
 _ifindex()
 {
-	local index=-1
-	local f v
-	if [ -e /sys/class/net/"${IFACE}"/ifindex ]; then
-		index=$(cat /sys/class/net/"${IFACE}"/ifindex)
-	else
-		for f in /sys/class/net/*/ifindex ; do
-			v=$(cat $f)
-			[ $v -gt $index ] && index=$v
-		done
-		: $(( index += 1 ))
-	fi
-	echo "${index}"
-	return 0
+	local line= i=-2
+	while read line; do
+		: $(( i += 1 ))
+		[ ${i} -lt 1 ] && continue
+		case "${line}" in
+			"${IFACE}:"*) echo "${i}"; return 0;;
+		esac
+	done < /proc/net/dev
+
+	# Return the next available index
+	: $(( i += 1 ))
+	echo "${i}"
+	return 1
 }
 
 _is_wireless()

net/ip6rd.sh

@@ -1,168 +0,0 @@
-# Copyright (c) 2011 by Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-_config_vars="$_config_vars link prefix suffix ipv4mask relay"
-
-ip6rd_depend()
-{
-	program ip
-	after interface
-}
-
-ip6rd_pre_start()
-{
-	# ALL interfaces run pre_start blocks, not just those with something
-	# assigned, so we must check if we need to run on this interface before we
-	# do so.
-	local config
-	eval config=\$config_${IFVAR}
-	[ "$config" = "ip6rd" ] || return 0
-
-	case "${MODULES}" in
-		*" ifconfig "*)
-			eerror "ifconfig is not supported for 6rd"
-			eerror "Please emerge sys-apps/iproute2"
-			return 1
-			;;
-	esac
-
-	local host= suffix= relay= addr= iface=${IFACE} config_ip6rd= localip= ipv4mask=
-	eval host=\$link_${IFVAR}
-	if [ -z "${host}" ]; then
-		eerror "link_${IFVAR} not set"
-		return 1
-	fi
-
-	eval host=\${link_${IFVAR}}
-	eval ipv4mask=\${ipv4mask_${IFVAR}:-0}
-	eval suffix=\${suffix_${IFVAR}:-1}
-	eval relay=\${relay_${IFVAR}}
-	eval prefix=\${prefix_${IFVAR}}
-
-	IFACE=${host}
-	addrs=$(_get_inet_addresses)
-	IFACE=${iface}
-	if [ -z "${addrs}" ]; then
-		eerror "${host} is not configured with an IPv4 address"
-		return 1
-	fi
-	# TODO: Get this settings from DHCP (Option 212)
-	if [ -z "${prefix}" ]; then
-		eerror "prefix_${IFVAR} not set"
-		return 1
-	fi
-	if [ -z "${relay}" ]; then
-		eerror "relay_${IFVAR} not set"
-		return 1
-	fi
-	for addr in ${addrs}; do
-		# Strip the subnet
-		local ip="${addr%/*}" subnet="${addr#*/}"
-		# We don't work on private IPv4 addresses
-		if _ip6rd_inet_is_private_network "${ip}"
-		then
-			continue
-		fi
-
-		local ip6= ip6_prefix="${prefix%::/*}" ip6_subnet="${prefix#*/}"
-		ip6_subnet=$((ip6_subnet + (32-ipv4mask)))
-		eval ip6="$(printf "${ip6_prefix}:%s::%s" \
-		$(_ip6rd_prefix_shave_bits  ${ip} ${ipv4mask}) ${suffix})"
-		veinfo "Derived IPv6 address: ${ip6}"
-
-		# Now apply our IPv6 address to our config
-		config_ip6rd="${config_ip6rd}${config_ip6rd:+ }${ip6}/${ip6_subnet}"
-
-		if [ -n "${localip}" ]; then
-			localip="any"
-		else
-			localip="${ip}"
-		fi
-	done
-
-	if [ -z "${config_ip6rd}" ]; then
-		eerror "No global IPv4 addresses found on interface ${host}"
-		return 1
-	fi
-
-	ebegin "Creating 6rd tunnel ${IFACE}"
-	if [ "${IFACE}" != "sit0" ]; then
-		_tunnel add "${IFACE}" mode sit ttl 255 remote any local "${localip}"
-	fi
-	_tunnel 6rd dev "${IFACE}" 6rd-prefix "${prefix}"
-	eend $? || return 1
-	_up
-
-	routes_ip6rd="2003::/3 via ::${relay} metric 2147483647"
-	service_set_value "config_ip6rd_$IFVAR" "$config_ip6rd"
-	service_set_value "routes_ip6rd_$IFVAR" "$routes_ip6rd"
-}
-
-ip6rd_start()
-{
-	local config_ip6rd=$(service_get_value "config_ip6rd_$IFVAR")
-	local routes_ip6rd=$(service_get_value "routes_ip6rd_$IFVAR")
-
-	# Now apply our config
-	eval config_${config_index}=\'"${config_ip6rd}"\'
-	: $(( config_index -= 1 ))
-
-	# Add a route for us, ensuring we don't delete anything else
-	local routes="$(_get_array "routes_${IFVAR}")
-$routes_ip6rd"
-	eval routes_${IFVAR}=\$routes
-}
-
-_ip6rd_inet_atoi()
-{
-	local IFS="${IFS}." ipi=0 j=3
-	for i in $1 ; do
-	       ipi=$(( ipi | i << 8*j-- ))
-	done
-	echo ${ipi}
-}
-
-_ip6rd_inet_itoa()
-{
-	local ipi=$1
-	for i in 0 1 2 3; do
-		if [ $i != 3 ] ; then
-			printf "%d." $(( (ipi & ~((1<<24)-1)) >> 24 ))
-			ipi=$(( (ipi & ((1<<24)-1)) << 8))
-		else
-			printf "%d\n" $(( (ipi & ~((1<<24)-1)) >> 24 ))
-		fi
-	done
-}
-
-_ip6rd_inet_get_network()
-{
-	echo $(_ip6rd_inet_itoa $(( ($(_ip6rd_inet_atoi $1) & ((1<<$2)-1) << (32-$2) ) )) )
-}
-
-_ip6rd_inet_is_private_network()
-{
-	if [ "$(_ip6rd_inet_get_network $1 16)" = "192.168.0.0" ]\
-	  || [ "$(_ip6rd_inet_get_network $1 8)" = "10.0.0.0" ]\
-	  || [ "$(_ip6rd_inet_get_network $1 12)" = "172.16.0.0" ]\
-	  || [ "$(_ip6rd_inet_get_network $1 16)" = "169.254.0.0" ]
-	then
-		return 0;
-	fi
-	return 1;
-}
-
-_ip6rd_prefix_shave_bits()
-{
-	local ipi=
-	ipi=$((  ($(_ip6rd_inet_atoi $1) & (1<<(32-$2))-1) << $2))
-	if [ $2 -le 16 ]
-	then
-		printf "%04x:%0$(( (16-$2>>2)+(($2%4)?1:0) ))x" \
-		$((ipi >> 16)) $((ipi & (1<<(16-$2))-1))
-	elif [ $2 -lt 32 ]
-	then
-		printf "%0$(( (32-$2>>2)+(($2%4)?1:0) ))x" \
-		$((ipi >> 16))
-	fi
-}

net/iproute2.sh

@@ -20,24 +20,24 @@ _down()
 
 _exists()
 {
-	[ -e /sys/class/net/"$IFACE" ]
+	grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/dev
 }
 
 _ifindex()
 {
-	local index=-1
-	local f v
-	if [ -e /sys/class/net/"${IFACE}"/ifindex ]; then
-		index=$(cat /sys/class/net/"${IFACE}"/ifindex)
-	else
-		for f in /sys/class/net/*/ifindex ; do
-			v=$(cat $f)
-			[ $v -gt $index ] && index=$v
-		done
-		: $(( index += 1 ))
-	fi
-	echo "${index}"
-	return 0
+	local line= i=-2
+	while read line; do
+		: $(( i += 1 ))
+		[ ${i} -lt 1 ] && continue
+		case "${line}" in
+			"${IFACE}:"*) echo "${i}"; return 0;;
+		esac
+	done < /proc/net/dev
+
+	# Return the next available index
+	: $(( i += 1 ))
+	echo "${i}"
+	return 1
 }
 
 _is_wireless()

net/udhcpc.sh

@@ -66,7 +66,7 @@ udhcpc_start()
 			if ${sendhost}; then
 				local hname="$(hostname)"
 				if [ "${hname}" != "(none)" ] && [ "${hname}" != "localhost" ]; then
-					args="${args} -x hostname:'${hname}'"
+					args="${args} --hostname='${hname}'"
 				fi
 			fi
 			;;

runlevels/Makefile

@@ -1,5 +1,5 @@
 BOOT=		bootmisc fsck hostname localmount \
-		root swap swapfiles sysctl urandom ${BOOT-${OS}}
+		root swap sysctl urandom ${BOOT-${OS}}
 DEFAULT=	local netmount
 SHUTDOWN=	savecache ${SHUTDOWN-${OS}}
 SYSINIT=	${SYSINIT-${OS}}
@@ -41,24 +41,34 @@ install:
 	if ! test -d "${SYSINITDIR}"; then \
 		${INSTALL} -d ${SYSINITDIR} || exit $$?; \
 		for x in ${SYSINIT}; do \
-			ln -snf ${PREFIX}/etc/init.d/"$$x" ${SYSINITDIR}/"$$x" || exit $$?; \
-		done \
+			if test -n "${PREFIX}"; then \
+				grep -q "keyword .*noprefix" ${INITDIR}/"$$x" && continue; \
+			fi; \
+			ln -snf ${PREFIX}/etc/init.d/"$$x" ${SYSINITDIR}/"$$x" || exit $$?; done \
 	fi
 	if ! test -d "${BOOTDIR}"; then \
 		${INSTALL} -d ${BOOTDIR} || exit $$?; \
 		for x in ${BOOT}; do \
+			if test -n "${PREFIX}"; then \
+				grep -q "keyword .*noprefix" ${INITDIR}/"$$x" && continue; \
+			fi; \
 			ln -snf ${PREFIX}/etc/init.d/"$$x" ${BOOTDIR}/"$$x" || exit $$?; \
 		done \
 	fi
 	if ! test -d "${DEFAULTDIR}"; then \
 		${INSTALL} -d ${DEFAULTDIR} || exit $$?; \
 		for x in ${DEFAULT}; do \
-			ln -snf ${PREFIX}/etc/init.d/"$$x" ${DEFAULTDIR}/"$$x" || exit $$?; \
-		done \
+			if test -n "${PREFIX}"; then \
+				grep -q "keyword .*noprefix" ${INITDIR}/"$$x" && continue; \
+			fi; \
+			ln -snf ${PREFIX}/etc/init.d/"$$x" ${DEFAULTDIR}/"$$x" || exit $$?; done \
 	fi
 	if ! test -d "${SHUTDOWNDIR}"; then \
 		${INSTALL} -d ${SHUTDOWNDIR} || exit $$?; \
 		for x in ${SHUTDOWN}; do \
+			if test -n "${PREFIX}"; then \
+				grep -q "keyword .*noprefix" ${INITDIR}/"$$x" && continue; \
+			fi; \
 			ln -snf ${PREFIX}/etc/init.d/"$$x" ${SHUTDOWNDIR}/"$$x" || exit $$?; done \
 	fi
 

sh/.gitignore

@@ -3,11 +3,8 @@ gendepends.sh
 init-common-post.sh
 rc-functions.sh
 runscript.sh
-cgroup-release-agent.sh
 init.sh
 init-early.sh
 ifwatchd-carrier.sh
 ifwatchd-nocarrier.sh
 udhcpc-hook.sh
-tmpfiles.sh
-migrate-to-run.sh

sh/Makefile

@@ -1,8 +1,8 @@
 DIR=	${LIBEXECDIR}/sh
 SRCS=	init.sh.in functions.sh.in gendepends.sh.in init-common-post.sh.in \
-	rc-functions.sh.in runscript.sh.in tmpfiles.sh.in ${SRCS-${OS}}
+	rc-functions.sh.in runscript.sh.in ${SRCS-${OS}}
 INC=	init-common-post.sh rc-mount.sh functions.sh rc-functions.sh
-BIN=	gendepends.sh init.sh runscript.sh tmpfiles.sh ${BIN-${OS}}
+BIN=	gendepends.sh init.sh runscript.sh ${BIN-${OS}}
 
 INSTALLAFTER=	_installafter
 
@@ -12,10 +12,8 @@ include ${MK}/os.mk
 SRCS-FreeBSD=
 BIN-FreeBSD=
 
-SRCS-Linux=	cgroup-release-agent.sh.in init-early.sh.in migrate-to-run.sh.in \
-	udhcpc-hook.sh.in
-BIN-Linux=	cgroup-release-agent.sh init-early.sh migrate-to-run.sh \
-	udhcpc-hook.sh
+SRCS-Linux=	cgroup-release-agent.sh.in init-early.sh.in udhcpc-hook.sh.in
+BIN-Linux=	cgroup-release-agent.sh init-early.sh udhcpc-hook.sh
 
 SRCS-NetBSD=	ifwatchd-carrier.sh.in ifwatchd-nocarrier.sh.in
 BIN-NetBSD=	ifwatchd-carrier.sh ifwatchd-nocarrier.sh

sh/gendepends.sh.in

@@ -4,7 +4,7 @@
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-. @LIBEXECDIR@/sh/functions.sh
+. @SYSCONFDIR@/init.d/functions.sh
 . @LIBEXECDIR@/sh/rc-functions.sh
 
 config() {

sh/init-early.sh.Linux.in

@@ -5,19 +5,6 @@
 : ${CONSOLE:=/dev/console}
 : ${RC_LIBEXECDIR:=@LIBEXECDIR@}
 
-service_present()
-{
-	local p="/etc/runlevels/$1/$2"
-	# fail if the file doesn't exist
-	[ ! -e "$p" ] && return 1
-	# succeed if $RC_SYS empty, can't check further, assume script will run
-	[ -z "$RC_SYS" ] && return 0
-	# fail if file contains "-$RC_SYS", because then it won't run
-	egrep -qi "^[[:space:]]*keyword[[:space:]].*-$RC_SYS\>" "$p" && return 1
-	# succeed otherwise
-	return 0
-}
-
 if [ -e "$RC_LIBEXECDIR"/console/unicode ]; then
 	termencoding="%G"
 	kmode="-u"
@@ -27,8 +14,8 @@ else
 fi
 
 # Try and set a font and as early as we can
-if service_present "$RC_DEFAULTLEVEL" consolefont ||
-   service_present "$RC_BOOTLEVEL" consolefont; then
+if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/consolefont \
+	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/consolefont ]; then
 	printf "\033%s" "$termencoding" >"$CONSOLE" 2>/dev/null
 	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /usr/bin/setfont ]; then
 		font="$(cat "$RC_LIBEXECDIR"/console/font)"
@@ -38,8 +25,8 @@ if service_present "$RC_DEFAULTLEVEL" consolefont ||
 fi
 
 # Try and set a keyboard map as early as possible
-if service_present "$RC_DEFAULTLEVEL" keymaps ||
-   service_present "$RC_BOOTLEVEL" keymaps; then
+if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/keymaps \
+	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/keymaps ]; then
 	kbd_mode $kmode -C "$CONSOLE" 2>/dev/null
 	if [ -r "$RC_LIBEXECDIR"/console/keymap ]; then
 		loadkeys -q "$RC_LIBEXECDIR"/console/keymap 2>/dev/null

sh/init.sh.Linux.in

@@ -3,6 +3,62 @@
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
+# This basically mounts $RC_SVCDIR as a ramdisk.
+# The tricky part is finding something our kernel supports
+# tmpfs and ramfs are easy, so force one or the other.
+svcdir_restorecon()
+{
+	local rc=0
+	if [ -x /usr/sbin/selinuxenabled -a -c /selinux/null ] &&
+	  selinuxenabled; then
+		restorecon $RC_SVCDIR
+		rc=$?
+	fi
+	return $rc
+}
+
+mount_svcdir()
+{
+	# mount from fstab if we can
+	fstabinfo --mount "$RC_SVCDIR" && return 0
+
+	local fs= fsopts="-o rw,noexec,nodev,nosuid"
+	local svcsize=${rc_svcsize:-1024}
+
+	# Some buggy kernels report tmpfs even when not present :(
+	if grep -Eq "[[:space:]]+tmpfs$" /proc/filesystems; then
+		local tmpfsopts="${fsopts},mode=755,size=${svcsize}k"
+		mount -n -t tmpfs $tmpfsopts rc-svcdir "$RC_SVCDIR"
+		if [ $? -eq 0 ]; then
+			svcdir_restorecon
+			[ $? -eq 0 ] && return 0
+		fi
+	fi
+
+	if grep -Eq "[[:space:]]+ramfs$" /proc/filesystems; then
+		fs="ramfs"
+		# ramfs has no special options
+	elif [ -e /dev/ram0 ] \
+		&& grep -Eq "[[:space:]]+ext2$" /proc/filesystems; then
+		devdir="/dev/ram0"
+		fs="ext2"
+		dd if=/dev/zero of="$devdir" bs=1k count="$svcsize"
+		mkfs -t "$fs" -i 1024 -vm0 "$devdir" "$svcsize"
+	else
+		echo
+		eerror "OpenRC requires tmpfs, ramfs or a ramdisk + ext2"
+		eerror "compiled into the kernel"
+		echo
+		return 1
+	fi
+
+	mount -n -t "$fs" $fsopts rc-svcdir "$RC_SVCDIR"
+	if [ $? -eq 0 ]; then
+		svcdir_restorecon
+		[ $? -eq 0 ] && return 0
+	fi
+}
+
 . "$RC_LIBEXECDIR"/sh/functions.sh
 [ -r /etc/rc.conf ] && . /etc/rc.conf
 
@@ -19,7 +75,7 @@ if [ -e $f ]; then
 	if [ "$(VAR=a cat $f)" = "$(VAR=b cat $f)" ]; then
 		eerror "You have cruft in /proc that should be deleted"
 	else
-		einfo "/proc is already mounted"
+		einfo "/proc is already mounted, skipping"
 		mountproc=false
 	fi
 fi
@@ -35,32 +91,24 @@ if $mountproc; then
 	eend $?
 fi
 
+# Mount tmpfs on /run when directory exists.
 # /run is a new directory for storing volatile runtime data.
 # Read more about /run at https://lwn.net/Articles/436012
-if [ ! -d /run ]; then
-	eerror "The /run directory does not exist. Unable to continue."
-	return 1
-fi
-
-if mountinfo -q /run; then
-	einfo "/run is already mounted, skipping"
-else
-	ebegin "Mounting /run"
-	rc=0
-	if ! fstabinfo --mount /run; then
-		mount -t tmpfs -o mode=0755,nosuid,nodev tmpfs /run
-		rc=$?
-	fi
-	if [ $rc != 0 ]; then
-		eerror "Unable to mount tmpfs on /run."
-		eerror "Can't continue."
-		exit 1
+if [ -d /run ]; then
+	if mountinfo -q /run; then
+		einfo "/run is already mounted, skipping"
+	else
+		ebegin "Mounting /run"
+		if ! fstabinfo --mount /run; then
+			mount -t tmpfs -o mode=0755,nosuid,nodev tmpfs /run
+		fi
+		eend $?
 	fi
+	checkpath -d -m 0775 -o root:uucp /run/lock
+elif [ -e /run ]; then
+	einfo "Unable to mount /run since it is not a directory"
 fi
 
-checkpath -d $RC_SVCDIR
-checkpath -d -m 0775 -o root:uucp /run/lock
-
 # Try to mount xenfs as early as possible, otherwise rc_sys() will always
 # return RC_SYS_XENU and will think that we are in a domU while it's not.
 if grep -Eq "[[:space:]]+xenfs$" /proc/filesystems; then
@@ -71,9 +119,4 @@ if grep -Eq "[[:space:]]+xenfs$" /proc/filesystems; then
 	eend $?
 fi
 
-if [ -e "$RC_LIBEXECDIR"/cache/deptree ]; then
-	cp -p "$RC_LIBEXECDIR"/cache/* "$RC_SVCDIR" 2>/dev/null
-fi
-
-echo sysinit >"$RC_SVCDIR"/softlevel
-exit 0
+. "$RC_LIBEXECDIR"/sh/init-common-post.sh

sh/migrate-to-run.sh.in

@@ -1,49 +0,0 @@
-#!@SHELL@
-# Copyright (c) 2012 William Hubbs <w.d.hubbs@gmail.com>
-# Released under the 2-clause BSD license.
-
-. "@LIBEXECDIR@/sh/functions.sh"
-
-if ! mountinfo -q -f tmpfs "@LIBEXECDIR@/init.d"; then
-	einfo "The OpenRC dependency data has already been migrated."
-	exit 0
-fi
-
-if [ ! -d "@PREFIX@/run" ]; then
-	eerror "'@PREFIX@/run' is not a directory."
-	eerror "This means the OpenRC dependency data cannot be migrated."
-	eerror "Please create the '@PREFIX@/run' directory and reboot the system."
-	exit 1
-fi
-
-if ! mountinfo -q -f tmpfs "@PREFIX@/run"; then
-	for x in "@PREFIX@/run/."* "@PREFIX@/run/"*; do
-		case "$x" in
-			"@PREFIX@/run/."|"@PREFIX@/run/..")
-				continue
-				;;
-		esac
-		if [ -e "$x" ]; then
-				eerror "Your '@PREFIX@/run' directory contains files."
-				eerror "Please reboot the system."
-				exit 1
-		fi
-	done
-
-	mount -t tmpfs -o mode=0755,nosuid,nodev \
-		tmpfs "@PREFIX@/run" 2> /dev/null
-	if [ $? != 0 ]; then
-		eerror "Unable to mount a tmpfs on '@PREFIX@/run'."
-		eerror "This means the OpenRC dependency data cannot be migrated."
-		eerror "Please create the '@PREFIX@/run' directory and reboot the system."
-		exit 1
-	fi
-fi
-
-rm -rf "@PREFIX@/run/openrc"
-cp -a "@LIBEXECDIR@/init.d" "@PREFIX@/run/openrc"
-rc-update -u
-rm -rf "@LIBEXECDIR@/init.d"
-umount "@LIBEXECDIR@/init.d"
-einfo "The OpenRC dependency data was migrated successfully."
-exit 0

sh/runscript.sh.in

@@ -4,22 +4,6 @@
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-verify_boot()
-{
-	if [ ! -e ${RC_SVCDIR}/softlevel ]; then
-		eerror "You are attempting to run an openrc service on a"
-		eerror "system which openrc did not boot."
-		eerror "You may be inside a chroot or you may have used"
-		eerror "another initialization system to boot this system."
-		eerror "In this situation, you will get unpredictable results!"
-		eerror
-		eerror "If you really want to do this, issue the following command:"
-		eerror "touch ${RC_SVCDIR}/softlevel"
-		exit 1
-	fi
-	return 0
-}
-
 sourcex()
 {
 	if [ "$1" = "-e" ]; then
@@ -32,7 +16,7 @@ sourcex()
 	fi
 }
 
-sourcex "@LIBEXECDIR@/sh/functions.sh"
+sourcex "@SYSCONFDIR@/init.d/functions.sh"
 sourcex "@LIBEXECDIR@/sh/rc-functions.sh"
 
 # Support LiveCD foo
@@ -40,6 +24,18 @@ if sourcex -e "/sbin/livecd-functions.sh"; then
 	livecd_read_commandline
 fi
 
+if [ ! -e ${RC_SVCDIR}/softlevel ]; then
+	eerror "You are attempting to run an openrc service on a"
+	eerror "system which openrc did not boot."
+	eerror "You may be inside a chroot or you may have used"
+	eerror "another initialization system to boot this system."
+	eerror "In this situation, you will get unpredictable results!"
+	eerror
+	eerror "If you really want to do this, issue the following command:"
+	eerror "touch ${RC_SVCDIR}/softlevel"
+	exit 1
+fi
+
 if [ -z "$1" -o -z "$2" ]; then
 	eerror "$RC_SVCNAME: not enough arguments"
 	exit 1
@@ -128,11 +124,7 @@ start()
 	local _background=
 	ebegin "Starting ${name:-$RC_SVCNAME}"
 	if yesno "${command_background}"; then
-		if [ -z "${pidfile}" ]; then
-			eend 1 "command_background option used but no pidfile specified"
-			return 1
-		fi
-		_background="--background --make-pidfile"
+		_background="--background --pidfile"
 	fi
 	if yesno "$start_inactive"; then
 		local _inactive=false
@@ -193,14 +185,6 @@ unset _conf_d
 # Load any system overrides
 sourcex -e "@SYSCONFDIR@/rc.conf"
 
-if [ "$RC_UNAME" = "Linux" -a "$1" = "start" ]; then
-	if [ -d /sys/fs/cgroup/openrc ]; then
-		mkdir -p /sys/fs/cgroup/openrc/${RC_SVCNAME}
-		echo $$ > /sys/fs/cgroup/openrc/${RC_SVCNAME}/tasks
-	fi
-	#todo: add processes to cgroups based on settings in conf.d
-fi
-
 # Apply any ulimit defined
 [ -n "${rc_ulimit:-$RC_ULIMIT}" ] && ulimit ${rc_ulimit:-$RC_ULIMIT}
 
@@ -233,12 +217,7 @@ while [ -n "$1" ]; do
 	# Special case depend
 	if [ "$1" = depend ]; then
 		shift
-
-		# Enter the dir of the init script to fix the globbing
-		# bug 412677
-		cd ${RC_SERVICE%/*}
 		_depend
-		cd /
 		continue
 	fi
 	# See if we have the required function and run it
@@ -265,7 +244,7 @@ while [ -n "$1" ]; do
 				# we can run this command
 				for _cmd in $extra_started_commands; do
 					if [ "$_cmd" = "$1" ]; then
-						if verify_boot && ! service_started; then
+						if ! service_started; then
 							eerror "$RC_SVCNAME: cannot \`$1' as it has not been started"
 							exit 1
 						fi
@@ -275,16 +254,13 @@ while [ -n "$1" ]; do
 				# we can run this command
 				for _cmd in $extra_stopped_commands; do
 					if [ "$_cmd" = "$1" ]; then
-						if verify_boot && ! service_stopped; then
+						if ! service_stopped; then
 							eerror "$RC_SVCNAME: cannot \`$1' as it has not been stopped"
 							exit 1
 						fi
 					fi
 				done
 				unset _cmd
-				case $1 in
-						start|stop|status) verify_boot;;
-				esac
 				if [ "$(command -v "$1_pre")" = "$1_pre" ]
 				then
 					"$1"_pre || exit $?

sh/tmpfiles.sh.in

@@ -1,288 +0,0 @@
-#!/bin/sh
-# This is a reimplementation of the systemd tmpfiles.d code
-# Control creation, deletion, and cleaning of volatile and temporary files
-#
-# Copyright (c) 2012 Gentoo Foundation
-#
-# This instance based on the Arch Linux version:
-# http://projects.archlinux.org/initscripts.git/tree/arch-tmpfiles
-# As of 2012/01/01
-#
-# See the tmpfiles.d manpage as well:
-# http://0pointer.de/public/systemd-man/tmpfiles.d.html
-# This script should match the manpage as of 2012/03/12
-#
-
-warninvalid() {
-	printf "tmpfiles: ignoring invalid entry on line %d of \`%s'\n" "$LINENUM" "$FILE"
-	error=$(( error+1 ))
-} >&2
-
-relabel() {
-	local path
-	local paths=$1 mode=$2 uid=$3 gid=$4
-
-	for path in ${paths}; do
-		if [ -e "$path" ]; then
-			[ $uid != '-' ] && chown $CHOPTS "$uid" "$path"
-			[ $gid != '-' ] && chgrp $CHOPTS "$gid" "$path"
-			[ $mode != '-' ] && chmod $CHOPTS "$mode" "$path"
-			[ -x /sbin/restorecon ] && restorecon $CHOPTS "$path"
-		fi
-	done
-}
-
-_b() {
-	# Create a block device node if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-	[ ! -e "$path" ] && mknod $path b ${arg%:*} ${arg#*:}
-}
-
-_c() {
-	# Create a character device node if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-	[ ! -e "$path" ] && mknod $path c ${arg%:*} ${arg#*:}
-}
-
-
-_f() {
-	# Create a file if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-
-	[ $CREATE -gt 0 ] || return 0
-
-	if [ ! -e "$path" ]; then
-		install -m"$mode" -o"$uid" -g"$gid" /dev/null "$path"
-		[ -n "$arg" ] && _w "$@"
-	fi
-}
-
-_F() {
-	# Create or truncate a file
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-
-	[ $CREATE -gt 0 ] || return 0
-
-	install -m"$mode" -o"$uid" -g"$gid" /dev/null "$path"
-	[ -n "$arg" ] && _w "$@"
-}
-
-_d() {
-	# Create a directory if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4
-
-	[ $CREATE -gt 0 ] || return 0
-
-	if [ ! -d "$path" ]; then
-		install -d -m"$mode" -o"$uid" -g"$gid" "$path"
-	fi
-}
-
-_D() {
-	# Create or empty a directory
-	local path=$1 mode=$2 uid=$3 gid=$4
-
-	if [ -d "$path" ] && [ $REMOVE -gt 0 ]; then
-		find "$path" -mindepth 1 -maxdepth 1 -xdev -exec rm -rf {} +
-	fi
-
-	if [ $CREATE -gt 0 ]; then
-		install -d -m"$mode" -o"$uid" -g"$gid" "$path"
-	fi
-}
-
-_L() {
-	# Create a symlink if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-	[ ! -e "$path" ] && ln -s "$args" "$path"
-}
-
-_p() {
-	# Create a named pipe (FIFO) if it doesn't exist yet
-	local path=$1 mode=$2 uid=$3 gid=$4
-
-	[ $CREATE -gt 0 ] || return 0
-
-	if [ ! -p "$path" ]; then
-		mkfifo -m$mode "$path"
-		chown "$uid:$gid" "$path"
-	fi
-}
-
-_x() {
-	# Ignore a path during cleaning. Use this type to exclude paths from clean-up as
-	# controlled with the Age parameter. Note that lines of this type do not
-	# influence the effect of r or R lines. Lines of this type accept shell-style
-	# globs in place of of normal path names.
-	:
-	# XXX: we don't implement this
-}
-
-_r() {
-	# Remove a file or directory if it exists. This may not be used to remove
-	# non-empty directories, use R for that. Lines of this type accept shell-style
-	# globs in place of normal path names.
-	local path
-	local paths=$1
-
-	[ $REMOVE -gt 0 ] || return 0
-
-	for path in ${paths}; do
-		if [ -f "$path" ]; then
-			rm -f "$path"
-		elif [ -d "$path" ]; then
-			rmdir "$path"
-		fi
-	done
-}
-
-_R() {
-	# Recursively remove a path and all its subdirectories (if it is a directory).
-	# Lines of this type accept shell-style globs in place of normal path names.
-	local path
-	local paths=$1
-
-	[ $REMOVE -gt 0 ] || return 0
-
-	for path in ${paths}; do
-		[ -d "$path" ] && rm -rf --one-file-system "$path"
-	done
-}
-
-_w() {
-	# Write the argument parameter to a file, if it exists.
-	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
-	[ -f "$path" ] && echo "$arg" >>"$path"
-}
-
-_z() {
-	# Set ownership, access mode and relabel security context of a file or
-	# directory if it exists. Lines of this type accept shell-style globs in
-	# place of normal path names.
-	[ $CREATE -gt 0 ] || return 0
-
-	relabel "$@"
-}
-
-_Z() {
-	# Recursively set ownership, access mode and relabel security context of a
-	# path and all its subdirectories (if it is a directory). Lines of this type
-	# accept shell-style globs in place of normal path names.
-	[ $CREATE -gt 0 ] || return 0
-
-	CHOPTS=-R relabel "$@"
-}
-
-CREATE=0 REMOVE=0 CLEAN=0 VERBOSE=0 DRYRUN=0 error=0 LINENO=0
-FILE=
-fragments=
-# XXX: The harcoding of /usr/lib/ is an explicit choice by upstream
-tmpfiles_dirs='/usr/lib/tmpfiles.d/ /etc/tmpfiles.d/ /run/tmpfiles.d/'
-tmpfiles_basenames=''
-tmpfiles_d=''
-# Build a list of sorted unique basenames
-# directories declared later in the tmpfiles_d array will override earlier
-# directories, on a per file basename basis.
-# `/etc/tmpfiles.d/foo.conf' supersedes `/usr/lib/tmpfiles.d/foo.conf'.
-# `/run/tmpfiles/foo.conf' will always be read after `/etc/tmpfiles.d/bar.conf'
-for d in ${tmpfiles_dirs} ; do
-	[ -d $d ] && for f in ${d}/*.conf ; do
-		[ -f $f ] && tmpfiles_basenames="${tmpfiles_basenames}\n${f##*/}"
-	done # for f in ${d}
-done # for d in ${tmpfiles_dirs}
-tmpfiles_basenames="`printf "${tmpfiles_basenames}\n" | sort | uniq`"
-
-for b in $tmpfiles_basenames ; do
-	real_f=''
-	for d in $tmpfiles_dirs ; do
-		f=${d}/${b}
-		[ -f "${f}" ] && real_f=$f
-	done
-	[ -f "${real_f}" ] && tmpfiles_d="${tmpfiles_d} ${real_f}"
-done
-
-while [ $# -gt 0 ]; do
-	case $1 in
-		--create) CREATE=1 ;;
-		--remove) REMOVE=1 ;;
-		--clean) CLEAN=1 ;; # TODO: Not implemented
-		--verbose) VERBOSE=1 ;;
-		--dryrun|--dry-run) DRYRUN=1 ;;
-	esac
-	shift
-done
-
-if [ $(( CREATE + REMOVE )) -ne 1 ] ; then
-	printf 'usage: %s [--create] [--remove] [--clean] [--verbose] [--dry-run]\n' "${0##*/}"
-	exit 1
-fi
-
-error=0
-
-# loop through the gathered fragments, sorted globally by filename.
-# `/run/tmpfiles/foo.conf' will always be read after `/etc/tmpfiles.d/bar.conf'
-for FILE in $tmpfiles_d ; do
-	LINENUM=0
-
-	### FILE FORMAT ###
-	# XXX: We ignore the 'Age' parameter
-	# 1    2              3    4    5    6   7
-	# Cmd  Path           Mode UID  GID  Age Argument
-	# d    /run/user      0755 root root 10d -
-	# Mode, UID, GID, Age, Argument may be omitted!
-
-	# XXX: Upstream says whitespace is NOT permitted in the Path argument.
-	# But IS allowed when globs are expanded for the x/r/R/z/Z types.
-	while read line; do
-		LINENUM=$(( LINENUM+1 ))
-
-		# This will skip over comments and empty lines
-		set -- $line
-
-		# Unless we have both command and path, skip this line.
-		if [ -z "$1" -o -z "$2" ]; then
-			continue
-		fi
-
-		# whine about invalid entries
-		case $1 in
-			f|F|w|d|D|p|L|c|b|x|r|R|z|Z) ;;
-			*) warninvalid ; continue ;;
-		esac
-
-		cmd=$1
-		path=$2
-
-		# fall back on defaults when parameters are passed as '-'
-		if [ "$3" = '-' -o "$3" = '' ]; then
-			case ${1} in
-				p|f|F) mode=0644 ;;
-				d|D) mode=0755 ;;
-				z|Z|x|r|R|L) ;;
-			esac
-		else
-			mode=$3
-		fi
-		uid=$4
-		gid=$5
-		age=$6
-		arg=$7
-
-		[ ${4} = '-' ] && uid=0
-		[ ${5} = '-' ] && gid=0
-		[ ${6} = '-' ] && age=0
-		[ ${7} = '-' ] && arg=''
-		set -- "$path" "$mode" "$uid" "$gid" "$age" "$arg"
-
-		[ "$VERBOSE" -eq "1" ] && echo _$cmd "$@"
-		if [ "${DRYRUN}" -eq "0" ]; then
-			_$cmd "$@"
-			rc=$?
-			[ $rc -ne 0 ] && error=$((error + 1))
-		fi
-	done <$FILE
-done
-
-exit $error
-
-# vim: set ts=2 sw=2 sts=2 noet ft=sh:

src/includes/helpers.h

@@ -1,139 +0,0 @@
-/*
-  helpers.h
-  This is private to us and not for user consumption
-*/
-
-/*
- * Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef __HELPERS_H__
-#define __HELPERS_H__
-
-#define ERRX fprintf (stderr, "out of memory\n"); exit (1)
-
-#define UNCONST(a)		((void *)(unsigned long)(const void *)(a))
-
-#ifdef lint
-# define _unused
-#endif
-#if __GNUC__ > 2 || defined(__INTEL_COMPILER)
-# define _dead __attribute__((__noreturn__))
-# define _unused __attribute__((__unused__))
-#else
-# define _dead
-# define _unused
-#endif
-
-#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
-
-/* Some libc implemntations don't have these */
-#ifndef TAILQ_CONCAT
-#define TAILQ_CONCAT(head1, head2, field) do {				      \
-		if (!TAILQ_EMPTY(head2)) {				      \
-			*(head1)->tqh_last = (head2)->tqh_first;	      \
-			(head2)->tqh_first->field.tqe_prev = (head1)->tqh_last; \
-			(head1)->tqh_last = (head2)->tqh_last;		      \
-			TAILQ_INIT((head2));				      \
-		}							      \
-	} while (0)
-#endif
-
-#ifndef TAILQ_FOREACH_SAFE
-#define	TAILQ_FOREACH_SAFE(var, head, field, tvar)			      \
-	for ((var) = TAILQ_FIRST((head));				      \
-	     (var) && ((tvar) = TAILQ_NEXT((var), field), 1);		      \
-	     (var) = (tvar))
-#endif
-
-#ifdef __GLIBC__
-#  if ! defined (__UCLIBC__) && ! defined (__dietlibc__)
-#    define strlcpy(dst, src, size) snprintf(dst, size, "%s", src)
-#  endif
-#endif
-
-#ifndef timespecsub
-#define	timespecsub(tsp, usp, vsp)					      \
-	do {								      \
-		(vsp)->tv_sec = (tsp)->tv_sec - (usp)->tv_sec;		      \
-		(vsp)->tv_nsec = (tsp)->tv_nsec - (usp)->tv_nsec;	      \
-		if ((vsp)->tv_nsec < 0) {				      \
-			(vsp)->tv_sec--;				      \
-			(vsp)->tv_nsec += 1000000000L;			      \
-		}							      \
-	} while (/* CONSTCOND */ 0)
-#endif
-
-_unused static void *xmalloc (size_t size)
-{
-	void *value = malloc(size);
-
-	if (value)
-		return (value);
-
-	ERRX;
-	/* NOTREACHED */
-}
-
-_unused static void *xrealloc(void *ptr, size_t size)
-{
-	void *value = realloc(ptr, size);
-
-	if (value)
-		return (value);
-
-	ERRX;
-	/* NOTREACHED */
-}
-
-_unused static char *xstrdup(const char *str)
-{
-	char *value;
-
-	if (! str)
-		return (NULL);
-
-	value = strdup(str);
-
-	if (value)
-		return (value);
-
-	ERRX;
-	/* NOTREACHED */
-}
-
-#undef ERRX
-
-/* basename_c never modifies the argument. As such, if there is a trailing
- * slash then an empty string is returned. */
-_unused static const char *basename_c(const char *path)
-{
-	const char *slash = strrchr(path, '/');
-
-	if (slash)
-		return (++slash);
-	return (path);
-}
-
-#endif

src/includes/rc-misc.h

@@ -36,9 +36,6 @@
 #include <stdbool.h>
 #include <stdlib.h>
 #include <string.h>
-#include <unistd.h>
-
-#include "helpers.h"
 
 #define RC_LEVEL_BOOT           "boot"
 #define RC_LEVEL_DEFAULT        "default"
@@ -54,6 +51,98 @@
 #define RC_SVCDIR_STARTED       RC_SVCDIR "/started"
 #define RC_SVCDIR_COLDPLUGGED	RC_SVCDIR "/coldplugged"
 
+#define ERRX fprintf (stderr, "out of memory\n"); exit (1)
+
+#define UNCONST(a)		((void *)(unsigned long)(const void *)(a))
+
+#ifdef lint
+# define _unused
+#endif
+#if __GNUC__ > 2 || defined(__INTEL_COMPILER)
+# define _dead __attribute__((__noreturn__))
+# define _unused __attribute__((__unused__))
+#else
+# define _dead
+# define _unused
+#endif
+
+/* Some libc implemntations don't have these */
+#ifndef TAILQ_CONCAT
+#define TAILQ_CONCAT(head1, head2, field) do {				      \
+		if (!TAILQ_EMPTY(head2)) {				      \
+			*(head1)->tqh_last = (head2)->tqh_first;	      \
+			(head2)->tqh_first->field.tqe_prev = (head1)->tqh_last; \
+			(head1)->tqh_last = (head2)->tqh_last;		      \
+			TAILQ_INIT((head2));				      \
+		}							      \
+	} while (0)
+#endif
+
+#ifndef TAILQ_FOREACH_SAFE
+#define	TAILQ_FOREACH_SAFE(var, head, field, tvar)			      \
+	for ((var) = TAILQ_FIRST((head));				      \
+	     (var) && ((tvar) = TAILQ_NEXT((var), field), 1);		      \
+	     (var) = (tvar))
+#endif
+
+#ifdef __GLIBC__
+#  if ! defined (__UCLIBC__) && ! defined (__dietlibc__)
+#    define strlcpy(dst, src, size) snprintf(dst, size, "%s", src)
+#  endif
+#endif
+
+#ifndef timespecsub
+#define	timespecsub(tsp, usp, vsp)					      \
+	do {								      \
+		(vsp)->tv_sec = (tsp)->tv_sec - (usp)->tv_sec;		      \
+		(vsp)->tv_nsec = (tsp)->tv_nsec - (usp)->tv_nsec;	      \
+		if ((vsp)->tv_nsec < 0) {				      \
+			(vsp)->tv_sec--;				      \
+			(vsp)->tv_nsec += 1000000000L;			      \
+		}							      \
+	} while (/* CONSTCOND */ 0)
+#endif
+
+_unused static void *xmalloc (size_t size)
+{
+	void *value = malloc(size);
+
+	if (value)
+		return (value);
+
+	ERRX;
+	/* NOTREACHED */
+}
+
+_unused static void *xrealloc(void *ptr, size_t size)
+{
+	void *value = realloc(ptr, size);
+
+	if (value)
+		return (value);
+
+	ERRX;
+	/* NOTREACHED */
+}
+
+_unused static char *xstrdup(const char *str)
+{
+	char *value;
+
+	if (! str)
+		return (NULL);
+
+	value = strdup(str);
+
+	if (value)
+		return (value);
+
+	ERRX;
+	/* NOTREACHED */
+}
+
+#undef ERRX
+
 _unused static bool exists(const char *pathname)
 {
 	struct stat buf;
@@ -77,14 +166,19 @@ int svc_lock(const char *);
 int svc_unlock(const char *, int);
 pid_t exec_service(const char *, const char *);
 
-/*
- * Check whether path is writable or not,
- * this also works properly with read-only filesystems
- */
-int is_writable(const char *);
-
 #define service_start(service) exec_service(service, "start");
 #define service_stop(service)  exec_service(service, "stop");
 
+/* basename_c never modifies the argument. As such, if there is a trailing
+ * slash then an empty string is returned. */
+_unused static const char *basename_c(const char *path)
+{
+	const char *slash = strrchr(path, '/');
+
+	if (slash)
+		return (++slash);
+	return (path);
+}
+
 int parse_mode(mode_t *, char *);
 #endif

src/libeinfo/libeinfo.c

@@ -51,7 +51,6 @@ const char libeinfo_copyright[] = "Copyright (c) 2007-2008 Roy Marples";
 #include <unistd.h>
 
 #include "einfo.h"
-#include "helpers.h"
 #include "hidden-visibility.h"
 
 hidden_proto(ecolor)
@@ -135,7 +134,7 @@ static const struct ecolor ecolors[] = {
 	{ ECOLOR_BRACKET, BRACKET, "bracket" },
 	{ ECOLOR_NORMAL,  0,       NULL      },
 };
-static const char *ecolors_str[ARRAY_SIZE(ecolors)];
+static const char *ecolors_str[sizeof(ecolors)/sizeof(ecolors[0])];
 
 static char *flush = NULL;
 static char *up = NULL;
@@ -226,6 +225,27 @@ strlcat(char *dst, const char *src, size_t size)
 
 	return dst_n + (s - src);
 }
+
+static size_t
+strlcpy(char *dst, const char *src, size_t size)
+{
+	const char *s = src;
+	size_t n = size;
+
+	if (n && --n)
+		do {
+			if (!(*dst++ = *src++))
+				break;
+		} while (--n);
+
+	if (!n) {
+		if (size)
+			*dst = '\0';
+		while (*src++);
+	}
+
+	return src - s - 1;
+}
 #  endif
 #endif
 
@@ -442,7 +462,7 @@ colour_terminal(FILE * EINFO_RESTRICT f)
 
 	/* Now setup our colours */
 	p = ebuffer;
-	for (i = 0; i < ARRAY_SIZE(ecolors); ++i) {
+	for (i = 0; i < sizeof(ecolors) / sizeof(ecolors[0]); i++) {
 		tmp[0] = '\0';
 		if (ecolors[i].name) {
 			bold = _md;
@@ -578,7 +598,7 @@ _ecolor(FILE * EINFO_RESTRICT f, ECOLOR color)
 	if (!colour_terminal(f))
 		return "";
 
-	for (i = 0; i < ARRAY_SIZE(ecolors); ++i)
+	for (i = 0; i < sizeof(ecolors) / sizeof(ecolors[0]); i++)
 		if (ecolors[i].color == color)
 			return ecolors_str[i];
 	return "";

src/librc/librc-depend.c

@@ -687,27 +687,27 @@ rc_deptree_update_needed(time_t *newest, char *file)
 	if (!existss(RC_DEPTREE_CACHE))
 		return true;
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_INITDIR, newest, file))
-		return true;
+		newer = true;
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_CONFDIR, newest, file))
-		return true;
+		newer = true;
 #ifdef RC_PKG_INITDIR
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_PKG_INITDIR, newest, file))
-		return true;
+		newer = true;
 #endif
 #ifdef RC_PKG_CONFDIR
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_PKG_CONFDIR, newest, file))
-		return true;
+		newer = true;
 #endif
 #ifdef RC_LOCAL_INITDIR
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_LOCAL_INITDIR, newest, file))
-		return true;
+		newer = true;
 #endif
 #ifdef RC_LOCAL_CONFDIR
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_LOCAL_CONFDIR, newest, file))
-		return true;
+		newer = true;
 #endif
 	if (!rc_newer_than(RC_DEPTREE_CACHE, RC_CONF, newest, file))
-		return true;
+		newer = true;
 
 	/* Some init scripts dependencies change depending on config files
 	 * outside of baselayout, like syslog-ng, so we check those too. */
@@ -715,7 +715,8 @@ rc_deptree_update_needed(time_t *newest, char *file)
 	TAILQ_FOREACH(s, config, entries) {
 		if (!rc_newer_than(RC_DEPTREE_CACHE, s->value, newest, file)) {
 			newer = true;
-			break;
+			if (newest == NULL)
+				break;
 		}
 	}
 	rc_stringlist_free(config);

src/librc/librc-misc.c

@@ -127,53 +127,6 @@ rc_getline(char **line, size_t *len, FILE *fp)
 }
 librc_hidden_def(rc_getline)
 
-char *
-rc_proc_getent(const char *ent)
-{
-#ifdef __linux__
-	FILE *fp;
-	char *proc, *p, *value = NULL;
-	size_t i, len;
-
-	if (!exists("/proc/cmdline"))
-		return NULL;
-
-	if (!(fp = fopen("/proc/cmdline", "r")))
-		return NULL;
-
-	proc = NULL;
-	i = 0;
-	if (rc_getline(&proc, &i, fp) == -1 || proc == NULL)
-		return NULL;
-
-	if (proc != NULL) {
-		len = strlen(ent);
-
-		while ((p = strsep(&proc, " "))) {
-			if (strncmp(ent, p, len) == 0 && (p[len] == '\0' || p[len] == ' ' || p[len] == '=')) {
-				p += len;
-
-				if (*p == '=')
-					p++;
-
-				value = xstrdup(p);
-			}
-		}
-	}
-
-	if (!value)
-		errno = ENOENT;
-
-	fclose(fp);
-	free(proc);
-
-	return value;
-#else
-	return NULL;
-#endif
-}
-librc_hidden_def(rc_proc_getent)
-
 RC_STRINGLIST *
 rc_config_list(const char *file)
 {
@@ -213,64 +166,6 @@ rc_config_list(const char *file)
 }
 librc_hidden_def(rc_config_list)
 
-/*
- * Override some specific rc.conf options on the kernel command line
- */
-#ifdef __linux__
-static RC_STRINGLIST *rc_config_override(RC_STRINGLIST *config)
-{
-	RC_STRINGLIST *overrides;
-	RC_STRING *cline, *override, *config_np;
-	char *tmp = NULL;
-	char *value = NULL;
-	size_t varlen = 0;
-	size_t len = 0;
-
-	overrides = rc_stringlist_new();
-
-	/* A list of variables which may be overridden on the kernel command line */
-	rc_stringlist_add(overrides, "rc_parallel");
-
-	TAILQ_FOREACH(override, overrides, entries) {
-		varlen = strlen(override->value);
-		value = rc_proc_getent(override->value);
-
-		/* No need to continue if there's nothing to override */
-		if (!value) {
-			free(value);
-			continue;
-		}
-
-		if (value != NULL) {
-			len = varlen + strlen(value) + 2;
-			tmp = xmalloc(sizeof(char) * len);
-			snprintf(tmp, len, "%s=%s", override->value, value);
-		}
-
-		/*
-		 * Whenever necessary remove the old config entry first to prevent
-		 * duplicates
-		 */
-		TAILQ_FOREACH_SAFE(cline, config, entries, config_np) {
-			if (strncmp(override->value, cline->value, varlen) == 0
-				&& cline->value[varlen] == '=') {
-				rc_stringlist_delete(config, cline->value);
-				break;
-			}
-		}
-
-		/* Add the option (var/value) to the current config */
-		rc_stringlist_add(config, tmp);
-
-		free(tmp);
-		free(value);
-	}
-
-	rc_stringlist_free(overrides);
-	return config;
-}
-#endif
-
 RC_STRINGLIST *
 rc_config_load(const char *file)
 {
@@ -344,13 +239,6 @@ rc_config_load(const char *file)
 	}
 	rc_stringlist_free(list);
 
-#ifdef __linux__
-	/* Only override rc.conf settings */
-	if (strcmp(file, RC_CONF) == 0) {
-		config = rc_config_override(config);
-	}
-#endif
-
 	return config;
 }
 librc_hidden_def(rc_config_load)
@@ -391,7 +279,7 @@ rc_conf_value(const char *setting)
 		atexit(_free_rc_conf);
 #endif
 
-		/* Support old configs. */
+		/* Support old configs */
 		if (exists(RC_CONF_OLD)) {
 			old = rc_config_load(RC_CONF_OLD);
 			TAILQ_CONCAT(rc_conf, old, entries);

src/librc/librc.c

@@ -216,6 +216,7 @@ rc_sys_v2(void)
 		}
 		/* Now do detection */
 		__STRING_SWITCH(systype)
+		__STRING_CASE(RC_SYS_PREFIX)	{ return RC_SYS_PREFIX; }
 #ifdef __FreeBSD__
 		__STRING_CASE(RC_SYS_JAIL) { return RC_SYS_JAIL; }
 #endif /* __FreeBSD__ */
@@ -245,6 +246,10 @@ librc_hidden_def(rc_sys_v2)
 const char *
 rc_sys_v1(void)
 {
+#ifdef PREFIX
+	return RC_SYS_PREFIX;
+#else
+
 #ifdef __FreeBSD__
 	int jailed = 0;
 	size_t len = sizeof(jailed);
@@ -281,6 +286,7 @@ rc_sys_v1(void)
 #endif
 
 	return NULL;
+#endif /* PREFIX */
 }
 librc_hidden_def(rc_sys_v1)
 
@@ -486,7 +492,7 @@ rc_service_exists(const char *service)
 {
 	char *file;
 	bool retval = false;
-	size_t len;
+	int len;
 	struct stat buf;
 
 	if (!service) {

src/librc/librc.h

@@ -87,7 +87,6 @@ librc_hidden_proto(rc_find_pids)
 librc_hidden_proto(rc_getfile)
 librc_hidden_proto(rc_getline)
 librc_hidden_proto(rc_newer_than)
-librc_hidden_proto(rc_proc_getent)
 librc_hidden_proto(rc_older_than)
 librc_hidden_proto(rc_runlevel_exists)
 librc_hidden_proto(rc_runlevel_get)

src/librc/rc.h.in

@@ -36,11 +36,7 @@ __BEGIN_DECLS
 #define RC_SYSCONFDIR		"@SYSCONFDIR@"
 #define RC_LIBDIR               "@PREFIX@/@LIB@/rc"
 #define RC_LIBEXECDIR           "@LIBEXECDIR@"
-#ifdef __linux__
-#define RC_SVCDIR               "@PREFIX@/run/openrc"
-#else
 #define RC_SVCDIR               RC_LIBEXECDIR "/init.d"
-#endif
 #define RC_RUNLEVELDIR          RC_SYSCONFDIR "/runlevels"
 #define RC_INITDIR              RC_SYSCONFDIR "/init.d"
 #define RC_CONFDIR              RC_SYSCONFDIR "/conf.d"
@@ -280,6 +276,7 @@ bool rc_service_daemons_crashed(const char *);
 #define RC_SYS_JAIL    "JAIL"
 #define RC_SYS_OPENVZ  "OPENVZ"
 #define RC_SYS_LXC     "LXC"
+#define RC_SYS_PREFIX  "PREFIX"
 #define RC_SYS_UML     "UML"
 #define RC_SYS_VSERVER "VSERVER"
 #define RC_SYS_XEN0    "XEN0"
@@ -364,11 +361,6 @@ bool rc_newer_than(const char *, const char *, time_t *, char *);
  * @return true if source is older than target, otherwise false */
 bool rc_older_than(const char *, const char *, time_t *, char *);
 
-/*! Read variables/values from /proc/cmdline
- * @param value
- * @return pointer to the value, otherwise NULL */
-char *rc_proc_getent(const char *);
-
 /*! Update the cached dependency tree if it's older than any init script,
  * its configuration file or an external configuration file the init script
  * has specified.

src/librc/rc.map

@@ -18,7 +18,6 @@ global:
 	rc_getline;
 	rc_newer_than;
 	rc_older_than;
-	rc_proc_getent;
 	rc_runlevel_exists;
 	rc_runlevel_get;
 	rc_runlevel_list;

src/rc/checkpath.c

@@ -32,6 +32,7 @@
 #include <sys/types.h>
 #include <sys/stat.h>
 
+#include <features.h>
 #include <errno.h>
 #include <fcntl.h>
 #include <getopt.h>
@@ -55,36 +56,24 @@ typedef enum {
 
 extern const char *applet;
 
-/* TODO: SELinux
- * This needs a LOT of SELinux loving
- * See systemd's src/label.c:label_mkdir
- */
 static int
 do_check(char *path, uid_t uid, gid_t gid, mode_t mode, inode_t type, bool trunc)
 {
 	struct stat st;
 	int fd, flags;
-	int r;
-	int u;
 
-	if (stat(path, &st) || trunc) {
+	if (stat(path, &st)) {
 		if (type == inode_file) {
 			einfo("%s: creating file", path);
 			if (!mode) /* 664 */
 				mode = S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH;
 			flags = O_CREAT|O_NDELAY|O_WRONLY|O_NOCTTY;
-#ifdef O_CLOEXEC
-			flags |= O_CLOEXEC;
-#endif
-#ifdef O_NOFOLLOW
-			flags |= O_NOFOLLOW;
+#ifdef __USE_XOPEN2K8
+			flags |= O_CLOEXEC|O_NOFOLLOW;
 #endif
 			if (trunc)
 				flags |= O_TRUNC;
-			u = umask(0);
-			fd = open(path, flags, mode);
-			umask(u);
-			if (fd == -1) {
+			if ((fd = open(path, flags, mode)) == -1) {
 				eerror("%s: open: %s", applet, strerror(errno));
 				return -1;
 			}
@@ -93,11 +82,7 @@ do_check(char *path, uid_t uid, gid_t gid, mode_t mode, inode_t type, bool trunc
 			einfo("%s: creating directory", path);
 			if (!mode) /* 775 */
 				mode = S_IRWXU | S_IRWXG | S_IROTH | S_IXOTH;
-			u = umask(0);
-			/* We do not recursively create parents */
-			r = mkdir(path, mode);
-			umask(u);
-			if (r == -1 && errno != EEXIST) {
+			if (mkdir(path, mode) == -1) {
 				eerror("%s: mkdir: %s", applet,
 				    strerror (errno));
 				return -1;
@@ -107,10 +92,7 @@ do_check(char *path, uid_t uid, gid_t gid, mode_t mode, inode_t type, bool trunc
 			einfo("%s: creating fifo", path);
 			if (!mode) /* 600 */
 				mode = S_IRUSR | S_IWUSR;
-			u = umask(0);
-			r = mkfifo(path, mode);
-			umask(u);
-			if (r == -1 && errno != EEXIST) {
+			if (mkfifo(path, mode) == -1) {
 				eerror("%s: mkfifo: %s", applet,
 				    strerror (errno));
 				return -1;
@@ -185,8 +167,8 @@ parse_owner(struct passwd **user, struct group **group, const char *owner)
 }
 
 #include "_usage.h"
-#define extraopts "path1 [path2] [...]"
-#define getoptstring "dDfFpm:o:W:" getoptstring_COMMON
+#define extraopts "path1 path2 ..."
+#define getoptstring "dDfFpm:o:" getoptstring_COMMON
 static const struct option longopts[] = {
 	{ "directory",          0, NULL, 'd'},
 	{ "directory-truncate", 0, NULL, 'D'},
@@ -195,7 +177,6 @@ static const struct option longopts[] = {
 	{ "pipe",               0, NULL, 'p'},
 	{ "mode",               1, NULL, 'm'},
 	{ "owner",              1, NULL, 'o'},
-	{ "writable",           1, NULL, 'W'},
 	longopts_COMMON
 };
 static const char * const longopts_help[] = {
@@ -206,7 +187,6 @@ static const char * const longopts_help[] = {
 	"Create a named pipe (FIFO) if not exists",
 	"Mode to check",
 	"Owner to check (user:group)",
-	"Check whether the path is writable or not",
 	longopts_help_COMMON
 };
 #include "_usage.c"
@@ -251,11 +231,6 @@ checkpath(int argc, char **argv)
 				eerrorx("%s: owner `%s' not found",
 				    applet, optarg);
 			break;
-		case 'W':
-			if (argv[optind] != NULL)
-				ewarn("-W/--writable takes only one path, everything else will be ignored");
-			exit(!is_writable(optarg));
-			break;
 
 		case_RC_COMMON_GETOPT
 		}