Remove references to localmount

Convert all references to localmount to the specific file systems that
should be needed.

BUSYBOX.md

@@ -0,0 +1,32 @@
+# Using Busybox as your Default Shell with OpenRC
+
+If you have/bin/sh linked to busybox, you need to be aware of several
+incompatibilities between busybox's applets and the standalone
+counterparts. Since it is possible to configure busybox to not include
+these applets or to prefer the standalone counterparts, OpenRC does not
+attempt to support the busybox applets.
+
+For now, it is recommended that you disable the following busybox
+configuration settings for best results with OpenRC.
+
+CONFIG_START_STOP_DAEMON -- The start-stop-daemon applet is not compatible with
+start-stop-daemon in OpenRC.
+
+CONFIG_MOUNT -- The mount applet does not support the -O [no]_netdev options to
+skip over or include network file systems when the -a option is present.
+
+CONFIG_UMOUNT -- The umount applet does not support the -O option along with -a.
+
+CONFIG_SWAPONOFF -- The swapon applet does not support the -e option
+or recognize the nofail option in fstab.
+
+CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
+
+CONFIG_IP -- The ip applet  doesn't support the "scope" modifier for
+"ip route add" and "ip address add".
+
+CONFIG_BB_SYSCTL -- The sysctl applet does not support the --system command
+line switch.
+
+There is work to get most of these supported by busybox, so this file
+will be updated as things change.

FEATURE-REMOVAL-SCHEDULE

@@ -1,49 +0,0 @@
-The following is a list of files and features that are going to be removed in
-the source tree.  Every entry should contain what exactly is going away, why it
-is happening, and who is going to be doing the work.  When the feature is
-removed, it should also be removed from this file.
-
----------------------------
-
-What: oldnet ADSL rp-pppoe mode
-
-When: undecided
-
-Why: Replaced by the oldnet PPP module
-
-Who:  Robin H. Johnson <robbat2@gentoo.org>
-
----------------------------
-
-What: oldnet /etc/conf.d/wireless
-
-When: undecided
-
-Why: All configuration moved to /etc/conf.d/net
-
-Who:  Robin H. Johnson <robbat2@gentoo.org>
-
----------------------------
-
-What: Service pause action
-
-When: Removed already, compatbility warning in place.
-
-Why: ...
-
-Who:
-
----------------------------
-
-What: Service --startas, --chuid , --oknodo
-
-When: undecided
-
-Why: Obsolete or replaced by other options.
-	 --startas => use --name or --exec
-	 --chuid => use --user
-	 --oknodo => ignore return code instead
-
-Who:
-
----------------------------

FEATURE-REMOVAL-SCHEDULE.md

@@ -0,0 +1,61 @@
+# Features Scheduled for Removal
+
+The following is a list of files and features that are going to be removed in
+the source tree.  Every entry should contain what exactly is going away, why it
+is happening, and who is going to be doing the work.  When the feature is
+removed, it should also be removed from this file.
+
+## Service pause action
+
+When: 1.0
+
+Why: The same affect can be obtained with the --nodeps option to stop.
+
+Who:
+
+## start-stop-daemon options --startas, --chuid , --oknodo
+
+When: 1.0
+
+Why: Obsolete or replaced by other options.
+
+* --startas => use --name or --exec
+* --chuid => use --user
+* --oknodo => ignore return code instead
+
+Who:
+
+## runscript and rc symbolic links
+
+When: 1.0
+
+Why: Deprecated in favor of openrc-run and openrc due to naming
+	 conflicts with other software.
+
+Who:
+
+## support for the opts variable in service scripts
+
+When: 1.0
+
+Why: Depprecated in favor of extra_commands, extra_started_commands
+	 and extra_stopped_commands.
+
+Who:
+
+## support for local_start and local_stop
+
+When: 1.0
+
+Why: Depprecated in favor of executable scripts in @SYSCONFDIR@/local.d
+
+Who:
+
+## the mtab service script
+
+When: make warnings more visible in 1.0, remove in 2.0
+
+Why: /etc/mtab should be a symbolic link to /proc/self/mounts on modern
+	 Linux systems
+
+Who:

HISTORY.md

@@ -0,0 +1,57 @@
+# OpenRC History
+
+This history of OpenRC was written by Daniel Robbins, Roy Marples, William
+Hubbs and others.
+
+The Gentoo modular init scripts were developed by Daniel Robbins for Gentoo
+Linux 1.0_rc6 during most of 2001 and released in September 2001. After their
+development, the dependency-based init script system was maintained by a
+number of senior developers, starting with Azarah (Martin Schlemmer), with
+migration to the new init system assisted by Woodchip (Donnie Davies) who
+converted all ebuild init scripts to work with the new system. As Grant
+Goodyear notes: 
+
+"My recollection is that one of woodchip's more impressive early feats
+was the complete replacement of all of the init scripts in Portage
+for Gentoo Linux 1.0_rc6. Through 1.0_rc5 Gentoo had used fairly
+standard rc scripts modified from Stampede Linux, but for 1.0_rc6 Daniel
+Robbins (drobbins) and Martin Schlemmer (azarah) had created a new
+dependency-based init script system that is still used today. Within a
+span of days Donny rewrote every single init script in the Portage tree
+and committed new masked packages to await the release of 1.0_rc6. Thanks to
+woodchip (and drobbins and azarah, of course) the
+transition to the new init scripts was nearly painless." [1] 
+
+Roy Marples became a Gentoo/Linux developer in 2004 and wrote the modular
+network scripts for the Gentoo baselayout package. Towards the end of 2005,
+he became the primary maintainer for baselayout and the init scripts. 
+
+At the start of 2007, He announced the ongoing development of
+baselayout-2, containing a rewritten core coded in C and allowing POSIX sh
+init scripts instead of forcing the use of bash. By mid 2007, He had
+re-implemented the Gentoo init script design created by Daniel Robbins,
+using an entirely new code base. Alpha and pre-release baselayout-2
+snapshots were added to Gentoo's Portage tree as an optional component.
+
+Toward the end of 2007, Roy retired as a Gentoo developer.
+Baselayout-2 was still in the pre stage, and aside from the gentoo-fbsd
+users, it was masked. However, He desired to keep the baselayout-2
+project moving forward as an independent project. The Gentoo Council
+permitted Him to release OpenRC under the 2-clause BSD license,
+managed by him as an external project. 
+
+Around mid-2010, Roy decided to no longer maintain OpenRC. At this
+point, he transferred development back to Gentoo.
+
+William Hubbs, and several other Gentoo developers,  started working on
+OpenRC around this point and brought OpenRC-0.8.x to Gentoo Linux's stable
+tree in 2011.
+
+In 2013 the OpenRC team became independent from Gentoo again and moved primary
+development to github.
+
+Daniel Robbins continues to maintain an independent, forked
+version of OpenRC for Funtoo Linux, which includes a Funtoo-specific network
+configuration system. 
+
+[1] http://www.gentoo.org/news/en/gwn/20040426-newsletter.xml

Makefile

@@ -2,7 +2,10 @@
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-include Makefile.inc
+TOP:=		${dir ${realpath ${firstword ${MAKEFILE_LIST}}}}
+MK=			${TOP}/mk
+
+include ${TOP}/Makefile.inc
 
 SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
 
@@ -17,12 +20,11 @@ SUBDIR+=	runlevels
 
 INSTALLAFTER=	_installafter
 
-MK= 		mk
 include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/git.mk
+include ${MK}/gitver.mk
 
 _installafter:
 ifeq (${MKPREFIX},yes)

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.13
+VERSION=	0.18
 PKG=		${NAME}-${VERSION}

NEWS.md

@@ -0,0 +1,63 @@
+# OpenRC NEWS
+
+This file will contain a list of notable changes for each release. Note
+the information in this file is in reverse order.
+
+## OpenRC-0.14
+
+The binfmt service, which registers misc binary formats with the Linux
+kernel, has been separated from the procfs service. This service will be
+automatically added to the boot runlevel for new Linux installs. When
+you upgrade, you will need to use rc-update to add it to your boot
+runlevel.
+
+The procfs service no longer automounts the deprecated usbfs and
+usbdevfs file systems. Nothing should be using usbdevfs any longer, and
+if you still need usbfs it can be added to fstab.
+
+Related to the above change, the procfs service no longer attempts to
+modprobe the usbcore module. If your device manager does not load it,
+you will need to configure the modules service to do so.
+
+The override order of binfmt.d and tmpfiles.d directories has been
+changed to match systemd. Files in /run/binfmt.d and /run/tmpfiles.d
+override their /usr/lib counterparts, and files in the /etc counterparts
+override both /usr/lib and /run.
+
+## OpenRC-0.13.2
+
+A chroot variable has been added to the service script variables.
+This fixes the support for running a service in a chroot.
+This is documented in man 8 openrc-run.
+
+The netmount service now mounts nfs file systems.
+This change was made to correct a fix for an earlier bug.
+
+## OpenRC-0.13
+
+/sbin/rc was renamed to /sbin/openrc and /sbin/runscript was renamed to
+/sbin/openrc-run due to naming conflicts with other software.
+
+Backward compatible symbolic links are currently in place so your
+system will keep working if you are using the old names; however, it is
+strongly advised that you migrate to the new names because the symbolic
+links will be removed in the future.
+Warnings have been added to assist with this migration; however, due to the
+level of noise they produce, they only appear in verbose mode in this release.
+
+The devfs script now handles the initial mounting and setup of the
+/dev directory. If /dev has already been mounted by the kernel or an
+initramfs, devfs will remount /dev with the correct mount options
+instead of mounting a second /dev over the existing mount point.
+
+It attempts to mount /dev from fstab first if an entry exists there. If
+it doesn't it attempts to mount devtmpfs if it is configured in the
+kernel. If not, it attempts to mount tmpfs.
+If none of these is available, an error message is displayed and static
+/dev is assumed.
+
+## OpenRC-0.12
+
+The net.* scripts, originally from Gentoo Linux, have
+been removed. If you need these scripts, look for a package called
+netifrc, which is maintained by them.

README

@@ -1,92 +0,0 @@
-OpenRC README
-
-
-Installation
-------------
-make install
-Yup, that simple. Works with GNU make.
-
-You may wish to tweak the installation with the below arguments
-PROGLDFLAGS=-static
-LIBNAME=lib64
-DESTDIR=/tmp/openrc-image
-MKNET=no
-MKPAM=pam
-MKPREFIX=yes
-MKPKGCONFIG=no
-MKSELINUX=yes
-MKSTATICLIBS=no
-MKTERMCAP=ncurses
-MKTERMCAP=termcap
-MKTOOLS=yes
-PKG_PREFIX=/usr/pkg
-LOCAL_PREFIX=/usr/local
-PREFIX=/usr/local
-
-We don't support building a static OpenRC with PAM.
-You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
-If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
-so that all malloc memory should be freed at exit.
-If you are building OpenRC for a Gentoo Prefix installation, add
-MKPREFIX=yes.
-
-You can also brand OpenRC if you so wish like so
-BRANDING=\"Gentoo/$(uname -s)\"
-
-PKG_PREFIX should be set to where packages install to by default.
-LOCAL_PREFIX should be set when to where user maintained packages are.
-Only set LOCAL_PREFIX if different from PKG_PREFIX.
-PREFIX should be set when OpenRC is not installed to /.
-
-If any of the following files exist then we do not overwrite them
-/etc/devd.conf
-/etc/rc
-/etc/rc.shutdown
-/etc/conf.d/*
-
-rc and rc.shutdown are the hooks from the BSD init into OpenRC.
-devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
-hook into OpenRC.
-inittab is the same, but for SysVInit as used by most Linux distributions.
-This can be found in the support folder.
-Obviously, if you're installing this onto a system that does not use OpenRC
-by default then you may wish to backup the above listed files, remove them
-and then install so that the OS hooks into OpenRC.
-
-init.d.misc is not installed by default as the scripts will need
-tweaking on a per distro basis. They are also non essential to the operation
-of the system.
-
-As of OpenRC-0.12, the net.* scripts, originally from Gentoo Linux, have
-been removed. If you need these scripts, look for a package called
-netifrc, which is maintained by them.
-
-Reporting Bugs
---------------
-Since Gentoo Linux is hosting OpenRC development, Bugs should go to
-the Gentoo Bugzilla:
-	http://bugs.gentoo.org/
-They should be filed under the "Gentoo Hosted Projects" product and
-the "openrc" component.
-
-
-History - by Roy Marples
-------------------------
-I became a Gentoo/Linux developer in 2004 and wrote the modular network
-scripts for the Gentoo baselayout package. baselayout is a collection of
-bash scripts to bring up your computer and its services.
-Then towards the end of 2005 I found myself as the primary maintainer
-for baselayout.
-
-At the start of 2007, baselayout-2 is announced to the world, re-writing the
-core of baselayout in C and allowing POSIX sh init scripts instead of
-forcing the use of bash. By Mid 2007 I have re-written everything, including
-init scripts, and alpha and pre baselayout-2 snapshots where put into Gentoo.
-Towards the end of 2007 I retired as a Gentoo developer for reasons I won't
-go into here. baselayout-2 was still in the pre stage, and aside from the
-fbsd users, it was masked everywhere. However, I also desired to keep the
-baselayout-2 project alive, but outside of Gentoo and into other projects
-such as FreeBSD.
-
-As such, the Gentoo Council have allowed the creation of OpenRC under the
-2 clause BSD license, managed by me as an external project.

README.busybox

@@ -1,28 +0,0 @@
-Using Busybox as your Default Shell
------------------------------------
-
-
-If you have/bin/sh linked to busybox, you need to be aware of several
-incompatibilities between busybox's applets and the standalone
-counterparts. Since it is possible to configure busybox to not include
-these applets or to prefer the standalone counterparts, OpenRC does not
-attempt to support the busybox applets.
-
-All of these apply to busybox 1.20.2, which is the current version of
-busybox as of this writing.
-
-1. The start-stop-daemon applet is not compatible with start-stop-daemon
-in OpenRC. Please make sure CONFIG_START_STOP_DAEMON is not set to y in
-the configuration file you use to build busybox.
-
-2. The -O option for the mount applet does not support the [no]_netdev
-options from util-linux for handling network file systems.
-
-3. The umount applet does not support the -O option from util-linux.
-
-4. The swapon applet does not support the -e option from util-linux.
-
-5. the setfont applet does not support the -u option from kbd.
-
-There is work to get most of these supported by busybox, so this file
-will be updated as things change.

README.md

@@ -0,0 +1,99 @@
+# OpenRC README
+
+OpenRC is a dependency-based init system that works with the
+system-provided init program, normally `/sbin/init`. Currently, it does
+not have an init program of its own.
+
+## Installation
+
+OpenRC requires GNU make.
+
+Once you have GNU Make installed, the default OpenRC installation can be
+executed using this command:
+
+make install
+
+## Configuration
+
+You may wish to configure the installation by passing one or more of the
+below arguments to the make command
+
+```
+PROGLDFLAGS=-static
+LIBNAME=lib64
+DESTDIR=/tmp/openrc-image
+MKNET=no
+MKPAM=pam
+MKPREFIX=yes
+MKPKGCONFIG=no
+MKSELINUX=yes
+MKSTATICLIBS=no
+MKTERMCAP=ncurses
+MKTERMCAP=termcap
+MKTOOLS=yes
+PKG_PREFIX=/usr/pkg
+LOCAL_PREFIX=/usr/local
+PREFIX=/usr/local
+BRANDING=\"Gentoo/$(uname -s)\"
+```
+
+## Notes
+
+We don't support building a static OpenRC with PAM.
+
+You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`.
+
+If you debug memory under valgrind, add `-DDEBUG_MEMORY`
+to your `CPPFLAGS` so that all malloc memory should be freed at exit.
+
+If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`.
+
+`PKG_PREFIX` should be set to where packages install to by default.
+
+`LOCAL_PREFIX` should be set when to where user maintained packages are.
+Only set `LOCAL_PREFIX` if different from `PKG_PREFIX`.
+
+`PREFIX` should be set when OpenRC is not installed to /.
+
+If any of the following files exist then we do not overwrite them
+
+```
+/etc/devd.conf
+/etc/rc
+/etc/rc.shutdown
+/etc/conf.d/*
+```
+
+`rc` and `rc.shutdown` are the hooks from the BSD init into OpenRC.
+
+`devd.conf` is modified from FreeBSD to call `/etc/rc.devd` which is a
+generic hook into OpenRC.
+
+`inittab` is the same, but for SysVInit as used by most Linux distributions.
+This can be found in the support folder.
+
+Obviously, if you're installing this onto a system that does not use
+OpenRC by default then you may wish to backup the above listed files,
+remove them and then install so that the OS hooks into OpenRC.
+
+`init.d.misc` is not installed by default as the scripts will need
+tweaking on a per distro basis. They are also non essential to the
+operation of the system.
+
+## Reporting Bugs
+
+If you are using Gentoo Linux, bugs can be filed on their bugzilla under
+the `gentoo hosted projects` product and the `openrc` component [1].
+Otherwise, you can report issues on our github [2].
+
+Better yet, if you can contribute code, please feel free to submit pull
+requests [3].
+
+## IRC Channel
+
+We have an official irc channel, #openrc on freenode, feel free to join
+us there.
+
+[1]	https://bugs.gentoo.org/
+[2]	https://github.com/openrc/openrc/issues
+[3]	https://github.com/openrc/openrc/pulls

STYLE-GUIDE.md

@@ -1,23 +1,23 @@
+# OpenRC Style Guide
+
 This is the openrc style manual.  It governs the coding style of all code
 in this repository.  Follow it.  Contact openrc@gentoo.org for any questions
 or fixes you might notice.
 
-##########
-# C CODE #
-##########
+## C CODE
 
-The BSD Kernel Normal Form (KNF) style is used:
-	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
-Basically, it's like K&R/LKML, but wrapped lines that are indented use 4 spaces.
+The BSD Kernel Normal Form (KNF) style is used [1]. Basically, it is like
+K&R/LKML, but wrapped lines that are indented use 4 spaces. Here are the
+highlights.
 
-Highlights:
-	- no trailing whitespace
-	- indented code use tabs (not line wrapped)
-	- cuddle the braces (except for functions)
-	- space after native statements and before paren (for/if/while/...)
-	- no space between function and paren
-	- pointer asterisk cuddles the variable, not the type
+- no trailing whitespace
+- indented code use tabs (not line wrapped)
+- cuddle the braces (except for functions)
+- space after native statements and before paren (for/if/while/...)
+- no space between function and paren
+- pointer asterisk cuddles the variable, not the type
 
+```
 void foo(int c)
 {
 	int ret = 0;
@@ -32,16 +32,15 @@ void foo(int c)
 
 	return ret;
 }
+```
 
-##################
-# COMMIT MESSAGES #
-##################
+## COMMIT MESSAGES
 
 The following is an example of a correctly formatted git commit message
 for this repository. Most of this information came from this blog post
-[1], so I would like to thank the author.
+[2], so I would like to thank the author.
 
-### cut here ###
+```
 Capitalized, short (50 chars or less) summary
 
 More detailed explanatory text, if necessary.  Wrap it to about 72
@@ -67,7 +66,7 @@ Further paragraphs come after blank lines.
 Reported-by: User Name <email>
 X-[Distro]-Bug: BugID
 X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
-### cut here ###
+```
 
 If you did not write the code and the patch does not include authorship
 information in a format git can use, please use the --author option of the
@@ -81,5 +80,5 @@ different from the author and committer.
   *BSD. Also, [Distro] should be replaced with the name of the
   distribution, e.g. X-Gentoo-Bug.
 
-[1] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
-
+[1]	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
+[2] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html

conf.d/Makefile

@@ -1,7 +1,7 @@
 include ../mk/net.mk
 
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
+CONF=	bootmisc fsck hostname localmount mount netmount urandom tmpfiles \
 		${CONF-${OS}}
 
 ifeq (${MKNET},yes)
@@ -15,7 +15,7 @@ include ${MK}/os.mk
 
 CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
 
-CONF-Linux=	consolefont dmesg hwclock keymaps killprocs modules
+CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules
 
 CONF-NetBSD=	moused rarpd savecore
 

conf.d/devfs

@@ -0,0 +1,8 @@
+# OpenRC will attempt each of the following in succession to mount /dev.
+#
+# 1. If there is an entry for /dev in fstab, it will be used.
+# 2. If devtmpfs is defined in the kernel, it will be used.
+# 3. If tmpfs is defined in the kernel, it will be used.
+#
+# Set this to yes if you do not want OpenRC to attempt to mount /dev.
+# skip_mount_dev="NO"

conf.d/hwclock

@@ -7,8 +7,8 @@ clock="UTC"
 # If you want the hwclock script to set the system time (software clock)
 # to match the current hardware clock during bootup, leave this
 # commented out.
-# However, you can set this to "NO" ifyou are running a modern kernel
-# with CONFIG_RTC_HCTOSYS set to y and your hardware clock set to UTC.
+# However, you can set this to "NO" if you are running a modern kernel
+# and using NTP to synchronize your system clock.
 #clock_hctosys="YES"
 
 # If you do not want to set the hardware clock to the current system

conf.d/keymaps

@@ -18,6 +18,6 @@ extended_keymaps=""
 # For a list of valid sets, run `dumpkeys --help`
 dumpkeys_charset=""
 
-# Some fonts map AltGr-E to the currency symbol ¤ instead of the Euro €
+# Some fonts map AltGr-E to the currency symbol instead of the Euro.
 # To fix this, set to "yes"
 fix_euro="NO"

conf.d/mount

@@ -0,0 +1,23 @@
+# The mount service is a multiplexed service. This means you must have
+# symbolic links to it in your init.d directory for each file system you
+# want to mount. I recommend naming those symbolic links the same as the
+# paths to the file systems they mount, removing the leading slash and
+# substituting _ for the remaining slashes, for example:
+#
+# cd /etc/init.d
+# ln -s mount mount.usr
+# ln -s mount mount.usr_local
+#
+# Set up a symbolic link like this for each file system you wish to
+# mount, then add the symbolic link to the appropriate runlevel. Once
+# that is done, add the appropriate definitions for the file system to
+# this file.
+#
+#You will need to define the mountpoint and any dependencies for each
+#filesystem as shown here.
+#
+#If the mountpoint does not match an entry in fstab, the mount will be
+#ignored.
+#
+#mount_usr_mountpoint="/usr"
+#

conf.d/network.GNU-kFreeBSD.in

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"

conf.d/network.GNU.in

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"

conf.d/staticroute.GNU-kFreeBSD.in

@@ -0,0 +1,5 @@
+# Separate multiple routes using ; or new lines.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
+#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"

conf.d/staticroute.GNU.in

@@ -0,0 +1,7 @@
+# Separate multiple routes using ; or new lines.
+# /etc/route.conf(5) takes precedence over this configuration.
+
+# Example static routes. See route(8) for syntax.
+# FIXME: "net ..." not supported
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"

etc/rc.conf.GNU

@@ -0,0 +1,14 @@
+##############################################################################
+# GNU/Hurd SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on GNU/Hurd:
+# ""        - nothing special
+# "subhurd" - Hurd subhurds (to be checked)
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+#rc_tty_number=6?

etc/rc.conf.GNU-kFreeBSD

@@ -0,0 +1,11 @@
+##############################################################################
+# GNU/kFreeBSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on GNU/kFreeBSD:
+# ""        - nothing special
+# "jail"    - FreeBSD jails (not yet implemented)
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""

etc/rc.conf.Linux

@@ -2,14 +2,15 @@
 # LINUX SPECIFIC OPTIONS
 
 # This is the subsystem type. Valid options on Linux:
-# ""        - nothing special
-# "lxc"     - Linux Containers
-# "openvz"  - Linux OpenVZ
-# "prefix"  - Prefix
-# "uml"     - Usermode Linux
-# "vserver" - Linux vserver
-# "xen0"    - Xen0 Domain
-# "xenU"    - XenU Domain
+# ""               - nothing special
+# "lxc"            - Linux Containers
+# "openvz"         - Linux OpenVZ
+# "prefix"         - Prefix
+# "uml"            - Usermode Linux
+# "vserver"        - Linux vserver
+# "systemd-nspawn" - Container created by the systemd-nspawn utility
+# "xen0"           - Xen0 Domain
+# "xenU"           - XenU Domain
 # If this is commented out, automatic detection will be used.
 #
 # This should be set to the value representing the environment this file is

etc/rc.conf.in

@@ -51,6 +51,10 @@
 # The default value is: /var/log/rc.log
 #rc_log_path="/var/log/rc.log"
 
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
 #rc_env_allow="VAR1 VAR2"
@@ -73,6 +77,10 @@
 #rc_crashed_stop=NO
 #rc_crashed_start=YES
 
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
 ##############################################################################
 # MISC CONFIGURATION VARIABLES
 # There variables are shared between many init scripts
@@ -86,7 +94,7 @@
 
 # Below is the default list of network fstypes.
 #
-# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
 # nfs nfs4 ocfs2 shfs smbfs
 #
 # If you would like to add to this list, you can do so by adding your
@@ -108,6 +116,9 @@
 #SSD_NICELEVEL="-19"
 
 # Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
 #rc_ulimit="-u 30"
 
 # It's possible to define extra dependencies for services like so

etc/rc.in

@@ -10,9 +10,9 @@
 trap : SIGINT
 trap "echo 'Boot interrupted'; exit 1" SIGQUIT
 
-/sbin/rc sysinit || exit 1
-/sbin/rc boot || exit 1
-/sbin/rc default
+/sbin/openrc sysinit || exit 1
+/sbin/openrc boot || exit 1
+/sbin/openrc default
 
 # We don't actually care if rc default worked or not, we should exit 0
 # to allow logins

etc/rc.shutdown.in

@@ -14,4 +14,4 @@ LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}" ; export LD_LIBRARY
 [ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
 
 action=${1:-shutdown}
-exec /sbin/rc "${action}"
+exec /sbin/openrc "${action}"

init.d.misc/avahi-dnsconfd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -10,6 +10,6 @@ name="Avahi DNS Configuration Daemon"
 depend()
 {
 	use dns
-	need localmount dbus
+	need mount.usr mount.var dbus
 	after bootmisc
 }

init.d.misc/avahid.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -10,6 +10,6 @@ name="Avahi Service Advertisement Daemon"
 depend()
 {
 	use dns
-	need localmount dbus
+	need mount.usr mount.var dbus
 	after bootmisc
 }

init.d.misc/dbus.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -9,7 +9,7 @@ name="Message Bus Daemon"
 
 depend()
 {
-	need localmount net
+	need mount.usr mount.var net
 	after bootmisc
 }
 

init.d.misc/dhcpcd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -10,7 +10,7 @@ name="DHCP Client Daemon"
 depend()
 {
 	provide net
-	need localmount
+	need mount.usr mount.var
 	use logger
 	after bootmisc modules
 	before dns

init.d.misc/dnsmasq.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -12,7 +12,7 @@ extra_started_commands="reload"
 depend()
 {
 	provide dns
-	need localmount net
+	need mount.usr mount.var net
 	after bootmisc
 }
 

init.d.misc/hald.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/named.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -24,7 +24,7 @@ esac
 depend()
 {
 	provide dns
-	need localmount
+	need mount.usr mount.var
 	after bootmisc
 }
 

init.d.misc/ntpd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -14,7 +14,7 @@ name="Network Time Protocol Daemon"
 depend()
 {
 	use dns
-	need localmount
+	need mount.usr mount.var
 	after bootmisc ntp-client
 }
 

init.d.misc/openvpn.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -31,7 +31,7 @@ fi
 
 depend()
 {
-	need localmount net
+	need mount.usr mount.var net
 	use dns
 	after bootmisc
 }
@@ -53,7 +53,7 @@ start_pre()
 			eend $?
 		fi
 	else
-		if type kldload >/dev/null 2>&1; then
+		if command -v kldload >/dev/null 2>&1; then
 			# Hammer the modules home by default
 			sysctl -a | grep -q '\.tun\.' || kldload if_tun
 			sysctl -a | grep -q '\.tap\.' || kldload if_tap

init.d.misc/polkitd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/sshd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/wpa_supplicant.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -10,7 +10,7 @@ name="WPA Supplicant Daemon"
 
 depend()
 {
-	need localmount
+	need mount.usr mount.var
 	use logger
 	after bootmisc modules
 	before dns dhcpcd net

init.d/.gitignore

@@ -4,6 +4,7 @@ hostname
 local
 localmount
 loopback
+mount
 moused
 netmount
 network
@@ -23,6 +24,7 @@ modules
 mount-ro
 mtab
 numlock
+osclock
 procfs
 staticroute
 sysfs

init.d/Makefile

@@ -2,8 +2,8 @@ include ../mk/net.mk
 
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
-	netmount.in root.in savecache.in swap.in swapfiles.in \
-	tmpfiles.setup.in swclock.in sysctl.in urandom.in ${SRCS-${OS}}
+	mount.in netmount.in osclock.in root.in savecache.in swap.in swapfiles.in \
+	tmpfiles.setup.in swclock.in sysctl.in urandom.in s6-svscan.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
 # Are we installing our network scripts?
@@ -21,7 +21,7 @@ SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
 		mixer.in nscd.in powerd.in syscons.in
 
-SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
+SRCS-Linux=	binfmt.in devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
 		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
 		procfs.in sysfs.in termencoding.in tmpfiles.dev.in
 

init.d/adjkerntz.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/binfmt.in

@@ -0,0 +1,20 @@
+#!@SBINDIR@/openrc-run
+# Copyright 2015 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+description="Register misc binary format handlers"
+
+depend()
+{
+	after procfs
+	use modules devfs
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+	ebegin "Loading custom binary format handlers"
+	"$RC_LIBEXECDIR"/sh/binfmt.sh
+	eend $?
+return 0
+}

init.d/bootmisc.in

@@ -1,12 +1,12 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 depend()
 {
-	need localmount
+	need mount.usr mount.var
 	before logger
-	after clock sysctl
+	after clock root sysctl
 	keyword -prefix -timeout
 }
 
@@ -68,7 +68,7 @@ cleanup_var_run_dir()
 	do
 		# Clean stale sockets
 		if [ -S "$x" ]; then
-			if type fuser >/dev/null 2>&1; then
+			if command -v fuser >/dev/null 2>&1; then
 				fuser "$x" >/dev/null 2>&1 || rm -- "$x"
 			else
 				rm -- "$x"
@@ -117,18 +117,42 @@ migrate_to_run()
 
 clean_run()
 {
+	[ "$RC_SYS" = VSERVER -o "$RC_SYS" = LXC ] && return 0
 	local dir
+	# If / is still read-only due to a problem, this will fail!
+	if ! checkpath -W /; then
+		eerror "/ is not writable; unable to clean up underlying /run"
+		return 1
+	fi
+	if ! checkpath -W /tmp; then
+		eerror "/tmp is not writable; unable to clean up underlying /run"
+		return 1
+	fi
+	# Now we know that we can modify /tmp and /
+	# if mktemp -d fails, it returns an EMPTY string
+	# STDERR: mktemp: failed to create directory via template ‘/tmp/tmp.XXXXXXXXXX’: Read-only file system
+	# STDOUT: ''
+	rc=0
 	dir=$(mktemp -d)
-	mount --bind / $dir
-	rm -rf $dir/run/*
-	umount $dir
-	rm -rf $dir
+	if [ -n "$dir" -a -d $dir -a -w $dir ]; then
+		mount --bind / $dir && rm -rf $dir/run/* || rc=1
+		umount $dir
+		rm -rf $dir
+	else
+		rc=1
+	fi
+	if [ $rc -ne 0 ]; then
+		eerror "Could not clean up underlying /run on /"
+		return 1
+	fi
 }
 
 start()
 {
 	# Remove any added console dirs
-	rm -rf "$RC_LIBEXECDIR"/console/*
+	if checkpath -W "$RC_LIBEXECDIR"; then
+		rm -rf "$RC_LIBEXECDIR"/console/*
+	fi
 
 	local logw=false runw=false extra=
 	# Ensure that our basic dirs exist
@@ -190,10 +214,13 @@ start()
 	if yesno $log_dmesg; then
 		if $logw || checkpath -W /var/log; then
 			# Create an 'after-boot' dmesg log
-			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ -a "$RC_SYS" != LXC ]; then
-				dmesg > /var/log/dmesg
-				chmod 640 /var/log/dmesg
-			fi
+			case "$RC_SYS" in
+				VSERVER|OPENVZ|LXC|SYSTEMD-NSPAWN) ;;
+				*)
+					dmesg > /var/log/dmesg
+					chmod 640 /var/log/dmesg
+					;;
+			esac
 		fi
 	fi
 

init.d/consolefont.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -6,9 +6,9 @@ description="Sets a font for the consoles."
 
 depend()
 {
-	need localmount termencoding
+	need mount.usr mount.var termencoding
 	after hotplug bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 start()

init.d/devd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,7 +7,7 @@ command_args=$devd_args
 name="Device State Change Daemon"
 
 depend() {
-	need localmount
+	need mount.usr mount.var
 	after bootmisc
 	before net.lo0
 	keyword -jail -prefix

init.d/devdb.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -6,7 +6,7 @@ description="Creates the dev database"
 
 depend()
 {
-	need localmount
+	need mount.usr mount.var
 }
 
 start()

init.d/devfs.in

@@ -1,21 +1,86 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-description="Mount system critical filesystems in /dev."
+description="Set up the /dev directory"
 
-depend() {
-	use dev-mount
+depend()
+{
+	provide dev-mount
 	before dev
-	keyword -prefix -vserver -lxc
+	keyword -prefix -systemd-nspawn -vserver -lxc
 }
 
-start() {
-	# Mount required stuff as user may not have then in /etc/fstab
+mount_dev()
+{
+	local action=--mount devfstype msg=Mounting
+	# Some devices require exec, Bug #92921
+	local mountopts="exec,nosuid,mode=0755"
+	if yesno ${skip_mount_dev:-no} ; then
+		einfo "/dev will not be mounted due to user request"
+		return 0
+	fi
+	if mountinfo -q /dev; then
+		action=--remount
+		mountopts="remount,$mountopts"
+		msg=Remounting
+	fi
+	if fstabinfo -q /dev; then
+		ebegin "$msg /dev according to @SYSCONFDIR@/fstab"
+		fstabinfo -q $action /dev
+		eend $?
+		return 0
+	fi
+	if grep -q devtmpfs /proc/filesystems; then
+		devfstype=devtmpfs
+		mountopts="$mountopts,size=10M"
+	elif grep -q tmpfs /proc/filesystems; then
+		devfstype=tmpfs
+		mountopts="$mountopts,size=10M"
+	fi
+	if [ -n "$devfstype" ]; then
+		ebegin "$msg $devfstype on /dev"
+		mount -n -t $devfstype -o $mountopts dev /dev
+		eend $?
+	else
+		ewarn "This kernel does not have devtmpfs or tmpfs support, and there"
+		ewarn "is no entry for /dev in fstab."
+		ewarn "This means /dev will not be mounted."
+		ewarn "To avoid this message, set CONFIG_DEVTMPFS or CONFIG_TMPFS to y"
+		ewarn "in your kernel configuration or see @SYSCONFDIR@/conf.d/devfs"
+	fi
+	return 0
+}
+
+seed_dev()
+{
+	# Seed /dev with some things that we know we need
+
+	# creating /dev/console, /dev/tty and /dev/tty1 to be able to write
+	# to $CONSOLE with/without bootsplash before udevd creates it
+	[ -c /dev/console ] || mknod -m 600 /dev/console c 5 1
+	[ -c /dev/tty1 ] || mknod -m 620 /dev/tty1 c 4 1
+	[ -c /dev/tty ] || mknod -m 666 /dev/tty c 5 0
+
+	# udevd will dup its stdin/stdout/stderr to /dev/null
+	# and we do not want a file which gets buffered in ram
+	[ -c /dev/null ] || mknod -m 666 /dev/null c 1 3
+
+	# so udev can add its start-message to dmesg
+	[ -c /dev/kmsg ] || mknod -m 660 /dev/kmsg c 1 11
+
+	# extra symbolic links not provided by default
+	[ -e /dev/fd ] || ln -snf /proc/self/fd /dev/fd
+	[ -e /dev/stdin ] || ln -snf /proc/self/fd/0 /dev/stdin
+	[ -e /dev/stdout ] || ln -snf /proc/self/fd/1 /dev/stdout
+	[ -e /dev/stderr ] || ln -snf /proc/self/fd/2 /dev/stderr
+	[ -e /proc/kcore ] && ln -snf /proc/kcore /dev/core
+
+	# Mount required directories as user may not have them in /etc/fstab
 	for x in \
 		"mqueue /dev/mqueue 1777 ,nodev mqueue" \
 		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
-		"tmpfs /dev/shm 1777 ,nodev shm" \
+		"tmpfs /dev/shm 1777 ,nodev,mode=1777 shm" \
 	; do
 		set -- $x
 		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
@@ -34,5 +99,23 @@ start() {
 			eend $?
 		fi
 	done
+}
+
+restorecon_dev()
+{
+	if [ -x /sbin/restorecon ]; then
+		ebegin "Restoring SELinux contexts in /dev"
+		restorecon -rF /dev >/dev/null 2>&1
+		eend $?
+	fi
+
+	return 0
+}
+
+start()
+{
+	mount_dev
+	seed_dev
+	restorecon_dev
 	return 0
 }

init.d/dmesg.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,7 +7,7 @@ description="Set the dmesg level for a cleaner boot"
 depend()
 {
 	before dev modules
-	keyword -lxc -prefix -vserver
+	keyword -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/dumpon.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/encswap.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright 1992-2012 FreeBSD Project
 # Released under the 2-clause BSD license
 

init.d/fsck.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -9,7 +9,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -timeout -vserver -lxc
+	keyword -jail -openvz -prefix -systemd-nspawn -timeout -vserver -lxc -uml
 }
 
 _abort() {

init.d/hostid.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -40,7 +40,7 @@ reset()
 {
 	local uuid= x="[0-9a-f]" y="$x$x$x$x"
 
-	if type kenv >/dev/null 2>&1; then
+	if command -v kenv >/dev/null 2>&1; then
 		uuid=$(kenv smbios.system.uuid 2>/dev/null)
 	fi
 	case "$uuid" in

init.d/hostname.in

@@ -1,11 +1,11 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -prefix -lxc
+	keyword -prefix -systemd-nspawn -lxc
 }
 
 start()

init.d/hwclock.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -28,7 +28,7 @@ depend()
 	else
 		before *
 	fi
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 setupopts()
@@ -83,22 +83,17 @@ start()
 		fi
 	fi
 
+	# Always set the kernel's time zone.
+	_hwclock --systz $utc_cmd $clock_args
+	: $(( retval += $? ))
+
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
 		_hwclock --adjust $utc_cmd
 		: $(( retval += $? ))
 	fi
 
-	# If setting UTC, don't bother to run hwclock when first booting
-	# as that's the default
-	if [ "$PREVLEVEL" != N -o \
-		"$utc_cmd" != --utc -o \
-		-n "$clock_args" ];
-	then
-		if yesno ${clock_hctosys:-YES}; then
-			_hwclock --hctosys $utc_cmd $clock_args
-		else
-			_hwclock --systz $utc_cmd $clock_args
-		fi
+	if yesno ${clock_hctosys:-YES}; then
+		_hwclock --hctosys $utc_cmd $clock_args
 		: $(( retval += $? ))
 	fi
 

init.d/ipfw.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/keymaps.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -6,9 +6,9 @@ description="Applies a keymap for the consoles."
 
 depend()
 {
-	need localmount termencoding
+	need mount.usr mount.var termencoding
 	after bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 start()

init.d/killprocs.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/local.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -12,40 +12,75 @@ depend()
 
 start()
 {
-	einfo "Starting local"
+	ebegin "Starting local"
 
-	local file
-	for file in @SYSCONFDIR@/local.d/*.start ; do
-		[ -x "$file" ] && "$file"
+	local file has_errors=0 redirect retval
+	yesno $rc_verbose || redirect='> /dev/null 2>&1'
+	eindent
+	for file in @SYSCONFDIR@/local.d/*.start; do
+		if [ -x "${file}" ]; then
+			vebegin "Executing \"${file}\""
+			eval "${file}" $redirect
+			retval=$?
+			if [ ${retval} -ne 0 ]; then
+				has_errors=1
+			fi
+			veend ${retval} "Execution of \"${file}\" failed."
+		fi
 	done
+	eoutdent
 
-	if type local_start >/dev/null 2>&1; then
-		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
+	if command -v local_start >/dev/null 2>&1; then
+		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
 		ewarn "Please move the code from the local_start function"
-		ewarn "to scripts with an .start extension"
-		ewarn "in @SYSCONFDIR@/local.d"
+		ewarn "to executable scripts with an .start extension"
+		ewarn "in \"@SYSCONFDIR@/local.d\""
 		local_start
 	fi
 
-	eend 0
+	eend ${has_errors}
+
+	# We have to end with a zero exit code, because a failed execution
+	# of an executable @SYSCONFDIR@/local.d/*.start file shouldn't result in
+	# marking the local service as failed. Otherwise we are unable to
+	# execute any executable @SYSCONFDIR@/local.d/*.stop file, because a failed
+	# marked service cannot be stopped (and the stop function would
+	# actually call the executable @SYSCONFDIR@/local.d/*.stop file(s)).
+	return 0
 }
 
 stop()
 {
-	einfo "Stopping local"
+	ebegin "Stopping local"
 
-	local file
+	local file has_errors=0 redirect retval
+	yesno $rc_verbose || redirect='> /dev/null 2>&1'
+	eindent
 	for file in @SYSCONFDIR@/local.d/*.stop; do
-		[ -x "$file" ] && "$file"
+		if [ -x "${file}" ]; then
+			vebegin "Executing \"${file}\""
+			eval "${file}" $redirect
+			retval=$?
+			if [ ${retval} -ne 0 ]; then
+				has_errors=1
+			fi
+			veend ${retval} "Execution of \"${file}\" failed."
+		fi
 	done
+	eoutdent
 
-	if type local_start >/dev/null 2>&1; then
-		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
+	if command -v local_stop >/dev/null 2>&1; then
+		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
 		ewarn "Please move the code from the local_stop function"
-		ewarn "to scripts with an .stop extension"
-		ewarn "in @SYSCONFDIR@/local.d"
+		ewarn "to executable scripts with an .stop extension"
+		ewarn "in \"@SYSCONFDIR@/local.d\""
 		local_stop
 	fi
 
-	eend 0
+	eend ${has_errors}
+
+	# An executable @SYSCONFDIR@/local.d/*.stop file which failed with a
+	# non-zero exit status is not a reason to mark this service
+	# as failed, therefore we have to end with a zero exit code.
+	return 0
 }

init.d/localmount.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -9,7 +9,7 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -jail -prefix -vserver -lxc
+	keyword -jail -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()
@@ -59,10 +59,35 @@ stop()
 	no_umounts_r="^($no_umounts_r)$"
 
 	# Flush all pending disk writes now
-	sync; sync
+	sync
 
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
+	if [ "$RC_UNAME" = Linux ] && [ -d /sys/fs/aufs ] ; then
+		#if / is aufs we remount it noxino during shutdown
+		if mountinfo -q -f '^aufs$' / ; then
+			mount -o remount,noxino,rw /
+			sync
+		fi
+
+		local aufs_branch aufs_mount_dir aufs_mount_point aufs_si_dir aufs_si_id
+		for aufs_si_dir in /sys/fs/aufs/*; do
+			aufs_mount_dir=${aufs_si_dir#/sys/fs/aufs/}
+			aufs_si_id="$(printf "%s" $aufs_mount_dir | sed 's/_/=/g')"
+			aufs_mount_point="$(mountinfo -o ${aufs_si_id})"
+			for x in $aufs_si_dir/br[0-9][0-9][0-9]; do
+				aufs_branch=$(sed 's/=.*//g' $x)
+				eindent
+				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
+					ewarn "Failed to remove branch $aufs_branch from aufs \
+						$aufs_mount_point"
+				fi
+				eoutdent
+				sync
+			done
+		done
+	fi
+
 	# Umount loop devices
 	einfo "Unmounting loop devices"
 	eindent

init.d/loopback.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2013 William Hubbs <w.d.hubbs@gmail.com>
 # Released under the 2-clause BSD license.
 
@@ -6,14 +6,14 @@ description="Configures the loopback interface."
 
 depend()
 {
-	return 0
+	keyword -jail -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	if [ "$RC_UNAME" = Linux ]; then
 		ebegin "Bringing up network interface lo"
-		if type ip > /dev/null 2>&1; then
+		if command -v ip > /dev/null 2>&1; then
 			ip addr add 127.0.0.1/8 dev lo brd + scope host
 			ip route add 127.0.0.0/8 dev lo scope host
 			ip link set lo up

init.d/mixer.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -6,7 +6,7 @@ extra_commands="restore"
 
 depend()
 {
-	need localmount
+	need mount.usr mount.var
 	keyword -jail -prefix
 }
 

init.d/modules.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,7 +7,7 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -vserver -lxc
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/mount-ro.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,7 +7,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 depend()
 {
 	need killprocs savecache
-	keyword -openvz -prefix -vserver -lxc
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()
@@ -15,7 +15,7 @@ start()
 	local ret=0
 
 	# Flush all pending disk writes now
-	sync; sync
+	sync
 
 	ebegin "Remounting remaining filesystems read-only"
 	# We need the do_unmount function

init.d/mount.in

@@ -0,0 +1,118 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2015 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+description="Mount a file system defined in @SYSCONFDIR@/fstab"
+extra_commands="generate"
+
+depend()
+{
+	need fsck
+	use modules mtab
+	after modules
+	keyword -jail -prefix -vserver -lxc
+}
+
+. "$RC_LIBEXECDIR"/sh/rc-mount.sh
+
+start_pre()
+{
+	# Do not start this service as "mount"
+	if [ "$rc_svcname" = mount ]; then
+		eerror "The mount service should not be started directly"
+		return 1
+	fi
+	return 0
+}
+
+start()
+{
+	if [ "$rc_svcname" = mount-generate-symlinks ]; then
+		generate
+		return $?
+	fi
+
+	local mountname=${rc_svcname#*.}
+	local fspath=${mount_${mountname}_mountpoint}
+
+	# for now, make sure fspath is in fstab
+	if [ ! fstabinfo -q $fspath ]; then
+		einfo "$rc_svcname: $fspath is not in @SYSCONFDIR@/fstab"
+		return 0
+	fi
+
+	# Is the file system mounted?
+	if mountinfo -q $fspath; then
+		action=remount
+		msg=Remounting
+	else
+		action=mount
+		msg=Mounting
+	fi
+
+	ebegin "$msg $fspath according to @SYSCONFDIR@/fstab"
+	fstabinfo --$action $fspath
+	eend $? "$fspath failed to $action"
+}
+
+stop_pre()
+{
+	# Do not stop this service as "mount"
+	if [ "$rc_svcname" = mount ]; then
+		eerror "The mount service should not be stopped directly"
+		return 1
+	fi
+	return 0
+}
+
+stop()
+{
+	yesno $RC_GOINGDOWN || return 0
+	local mountname=${rc_svcname#*.}
+	local fspath=${mount_${mountname}_mountpoint}
+
+	# make sure fspath is in fstab
+	if ! fstabinfo -q $fspath; then
+		einfo "$rc_svcname: $fspath is not in @SYSCONFDIR@/fstab"
+		return 0
+	fi
+
+	# Is the file system mounted?
+	mountinfo -q $fspath || return 0
+
+	# Flush all pending disk writes now
+	sync
+
+	ebegin "Unmounting $fspath"
+	do_unmount umount $fspath
+	eend $? "Unable to umount $fspath"
+	return 0
+}
+
+generate()
+{
+	local fslist="$(fstabinfo)"
+	local fs fsopts rc=0
+	local svcpath=${RC_SVCNAME%/*}
+	ebegin "Generating mount symlinks"
+	for fs in $fslist; do
+		case $fs in
+		/) ;;
+		/*)
+			fsopts="$(fstabinfo -o $fs)"
+			case "$fsopts" in
+			*noauto*) ;;
+			*)
+				local name="${fs#/}"
+				name="$(echo $name | sed 's#/#.#g')"
+				einfo ln -snf mount "${svcpath}/${name}"
+				rc=$?
+				[ $rc -ne 0 ] && break
+			*) ;;
+			esac
+		*) ;;
+		esac
+	done
+	eend $rc "Failed to generate symlinks for all mounts"
+	return $rc
+}

init.d/moused.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -14,7 +14,7 @@ name="Console Mouse Daemon"
 
 depend()
 {
-	need localmount
+	need mount.usr mount.var
 	after bootmisc
 	keyword -jail -prefix
 }

init.d/mtab.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,30 +7,35 @@ description="Update /etc/mtab to match what the kernel knows about"
 depend()
 {
 	need root
-	keyword -prefix
+	keyword -prefix -systemd-nspawn
 }
 
 start()
 {
-	if [ -L /etc/mtab ]
-	then
-		einfo "Skipping mtab update (mtab is a symbolic link)"
-		return 0
-	fi
-
+	[ -L /etc/mtab ] && return 0
+	local rc=0
 	ebegin "Updating /etc/mtab"
-	if ! echo 2>/dev/null >/etc/mtab; then
-		ewend 1 "/etc/mtab is not updateable"
-		return 0
+	if ! checkpath -W /etc; then
+		rc=1
+	elif [ ! -e /etc/mtab ]; then
+		ln -snf /proc/self/mounts /etc/mtab
+	else
+		ewarn "The support for updating /etc/mtab as a file is"
+		ewarn "deprecated and will be removed in the future."
+		ewarn "Please run the following command as root on your system."
+		ewarn
+		ewarn "ln -snf /proc/self/mounts /etc/mtab"
+		ewarn
+
+		# With / as tmpfs we cannot umount -at tmpfs in localmount as that
+		# makes / readonly and dismounts all tmpfs even if in use which is
+		# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
+		# which allows this hack to work.
+		grep -v "^[! ]* / tmpfs " /proc/mounts > /etc/mtab
+
+		# Remove stale backups
+		rm -f /etc/mtab~ /etc/mtab~~
 	fi
-
-	# With / as tmpfs we cannot umount -at tmpfs in localmount as that
-	# makes / readonly and dismounts all tmpfs even if in use which is
-	# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
-	# which allows this hack to work.
-	grep -v "^[! ]* / tmpfs " /proc/mounts > /etc/mtab
-
-	# Remove stale backups
-	rm -f /etc/mtab~ /etc/mtab~~
-	eend 0
+	eend $rc "/etc is not writable; unable to create /etc/mtab"
+	return 0
 }

init.d/netmount.in

@@ -1,29 +1,21 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-description="Mounts network shares, other than NFS, according to /etc/fstab."
-# We skip all NFS shares in this script because they require extra
-# daemons to be running on the client in order to work correctly.
-# It is best to allow nfs-utils to handle all nfs shares.
+description="Mounts network shares according to /etc/fstab."
 
 depend()
 {
 	config /etc/fstab
-	use afc-client amd autofs openvpn
+	use afc-client amd nfsclient autofs openvpn
 	use dns
-	keyword -jail -prefix -vserver -lxc
+	keyword -jail -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()
 {
 	local x= fs= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
-		case "$x" in
-			nfs|nfs4)
-			continue
-			;;
-		esac
 		fs="$fs${fs:+,}$x"
 	done
 
@@ -46,14 +38,7 @@ stop()
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
 	for x in $net_fs_list $extra_net_fs_list; do
-		case "$x" in
-			nfs|nfs4)
-				continue
-				;;
-			*)
-				fs="$fs${fs:+,}$x"
-				;;
-		esac
+		fs="$fs${fs:+,}$x"
 	done
 	if [ -n "$fs" ]; then
 		umount -at $fs || eerror "Failed to simply unmount filesystems"
@@ -62,14 +47,7 @@ stop()
 	eindent
 	fs=
 	for x in $net_fs_list $extra_net_fs_list; do
-		case "$x" in
-			nfs|nfs4)
-				continue
-				;;
-			*)
-				fs="$fs${fs:+|}$x"
-				;;
-		esac
+		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount umount ${fs:+--fstype-regex} $fs --netdev

init.d/network.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -10,7 +10,7 @@ __nl="
 
 depend()
 {
-	need localmount
+	need mount.usr mount.var
 	after bootmisc
 	if [ -n "$(interfaces)" ]; then
 		provide net
@@ -46,7 +46,11 @@ sys_interfaces()
 		local w= rest= i= cmd=$1
 		while read w rest; do
 			i=${w%%:*}
-			[ "$i" != "$w" ] || continue
+			case "$i" in
+				"$w") continue ;;
+				lo|lo0) continue ;;
+				*) ;;
+			esac
 			if [ "$cmd" = u ]; then
 				ifconfig "$i" | grep -q "[ ]*UP" || continue
 			fi

init.d/newsyslog.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -6,7 +6,7 @@ required_files="/etc/newsyslog.conf"
 
 depend()
 {
-	need localmount
+	need mount.usr mount.var
 	keyword -prefix
 }
 

init.d/nscd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -10,7 +10,7 @@ name="Name Service Cache Daemon"
 extra_started_commands="flush"
 
 depend() {
-	need localmount
+	need mount.usr mount.var
 	use net dns ldap ypbind
 	after bootmisc
 }

init.d/numlock.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -8,8 +8,8 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
-	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	need mount.usr mount.var
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 _setleds()

init.d/osclock.in

@@ -0,0 +1,12 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2014 Ralph Sennhauser <sera@igentoo.org>
+# Released under the 2-clause BSD license.
+
+# Can be used on OSs that take care of the clock.
+
+description="Provides clock"
+
+depend()
+{
+	provide clock
+}

init.d/pf.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -10,14 +10,14 @@ extra_commands="checkconfig showstatus"
 extra_started_commands="reload"
 
 depend() {
-	need localmount
+	need mount.usr mount.var
 	keyword -jail -prefix
 }
 
 start()
 {
 	ebegin "Starting $name"
-	if type kldload >/dev/null 2>&1; then
+	if command -v kldload >/dev/null 2>&1; then
 		kldload pf 2>/dev/null
 	fi
 	pfctl -q -F all

init.d/powerd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -9,7 +9,7 @@ name="Power Control Daemon"
 
 depend()
 {
-	need localmount
+	need mount.usr mount.var
 	use logger
 	after bootmisc
 	keyword -jail -prefix

init.d/procfs.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,67 +7,21 @@ description="Mounts misc filesystems in /proc."
 depend()
 {
 	use modules devfs
-	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	need mount.usr mount.var
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()
 {
-	# Make sure we insert usbcore if it's a module
-	if [ -f /proc/modules -a ! -d /sys/module/usbcore -a ! -d /proc/bus/usb ]; then
-		modprobe -q usbcore
-	fi
-
-	[ -e /proc/filesystems ] || return 0
-
 	# Setup Kernel Support for miscellaneous Binary Formats
 	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
+		modprobe -q binfmt-misc
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \
 				binfmt_misc /proc/sys/fs/binfmt_misc
-			if eend $? ; then
-				local fmts
-				ebegin "Loading custom binary format handlers"
-				fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
-					/run/binfmt.d/*.conf \
-					/etc/binfmt.d/*.conf \
-					""/usr/lib/binfmt.d/*.conf)
-				if [ -n "${fmts}" ]; then
-					echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
-				fi
 				eend $?
-			fi
 		fi
 	fi
-
-	[ "$RC_SYS" = "OPENVZ" ] && return 0
-
-	# Check what USB fs the kernel support.  Currently
-	# 2.5+ kernels, and later 2.4 kernels have 'usbfs',
-	# while older kernels have 'usbdevfs'.
-	if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
-		local usbfs=$(grep -Fow usbfs /proc/filesystems ||
-			grep -Fow usbdevfs /proc/filesystems)
-		if [ -n "$usbfs" ]; then
-			ebegin "Mounting USB device filesystem [$usbfs]"
-			local usbgid="$(getent group usb | \
-				sed -e 's/.*:.*:\(.*\):.*/\1/')"
-			mount -t $usbfs \
-				-o ${usbgid:+devmode=0664,devgid=$usbgid,}noexec,nosuid \
-				usbfs /proc/bus/usb
-			eend $?
-		fi
-	fi
-
-	# Setup Kernel Support for SELinux
-	if [ -d /selinux ] && ! mountinfo -q /selinux; then
-		if grep -qs selinuxfs /proc/filesystems; then
-			ebegin "Mounting SELinux filesystem"
-			mount -t selinuxfs selinuxfs /selinux
-			eend $?
-		fi
-	fi
-
 	return 0
 }

init.d/rarpd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -17,7 +17,7 @@ command_background=YES
 
 depend()
 {
-	need localmount
+	need mount.usr mount.var
 	after bootmisc
 	need net
 }

init.d/rc-enabled.in

@@ -1,10 +1,10 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 depend()
 {
-	need localmount net
+	need mount.usr mount.var net
 	after *
 	before local
 	keyword -prefix

init.d/root.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,7 +7,7 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/rpcbind.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -9,7 +9,7 @@ name="RPC program number mapper"
 depend()
 {
 	provide rpc
-	need localmount
+	need mount.usr mount.var
 	use net logger dns
 	before inetd xinetd ntpd ntp-client
 }

init.d/s6-svscan.in

@@ -0,0 +1,31 @@
+#!@SBINDIR@/openrc-run
+# Copyright (C) 2015 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+command=/bin/s6-svscan
+command_args="${RC_SVCDIR}"/s6-scan
+command_background=yes
+pidfile=/var/run/s6-svscan.pid
+
+depend()
+{
+	need mount.usr mount.var
+}
+
+start_pre()
+{
+	einfo "Creating s6 scan directory"
+	checkpath -d -m 0755 "$RC_SVCDIR"/s6-scan
+	return $?
+}
+
+stop_post()
+{
+	ebegin "Stopping any remaining s6 services"
+	s6-svc -dx "${RC_SVCDIR}"/s6-scan/* 2>/dev/null || true
+	eend $?
+
+	ebegin "Stopping any remaining s6 service loggers"
+	s6-svc -dx "${RC_SVCDIR}"/s6-scan/*/log 2>/dev/null || true
+	eend $?
+}

init.d/savecache.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -25,12 +25,12 @@ start()
 	local rc=
 	if [ ! -d "$RC_LIBEXECDIR"/cache ]; then
 		rm -rf "$RC_LIBEXECDIR"/cache
-		if ! mkdir "$RC_LIBEXECDIR"/cache; then
+		if ! mkdir -p "$RC_LIBEXECDIR"/cache; then
 			rc=$?
 			if yesno "${RC_GOINGDOWN}"; then
 				rc=0
 			fi
-			eend $rc
+			eend $rc "Unable to create $RC_LIBEXECDIR/cache"
 			return $rc
 		fi
 	fi

init.d/savecore.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -6,7 +6,7 @@ description="Saves a kernel dump."
 
 depend()
 {
-	need dumpon localmount
+	need dumpon mount.usr mount.var
 	before encswap
 	keyword -jail -prefix
 }
@@ -23,7 +23,7 @@ start()
 		# Don't quote ${dump_device}, so that if it's unset,
 		# savecore will check on the partitions listed in fstab
 		# without errors in the output
-		savecore -C "$dump_dir" $dump_device >/dev/null
+		savecore -C $dump_device >/dev/null
 	else
 		ls "$dump_dir"/bsd* > /dev/null 2>&1
 	fi

init.d/staticroute.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/swap-blk.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/swap.in

@@ -1,11 +1,11 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 depend()
 {
-	before localmount
-	keyword -jail -openvz -prefix -vserver -lxc
+	before mount.usr mount.var
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/swapfiles.in

@@ -1,11 +1,11 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 depend()
 {
-	need localmount
-	keyword -jail -openvz -prefix -vserver -lxc
+	need mount.usr mount.var
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
 }
 
 start()

init.d/swclock.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -8,7 +8,7 @@ depend()
 {
 	before *
 	provide clock
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
 }
 
 # swclock is an OpenRC built in
@@ -17,7 +17,7 @@ start()
 {
 	ebegin "Setting the local clock based on last shutdown time"
 	if ! swclock 2> /dev/null; then
-	swclock --warn @SBINDIR@/runscript
+	swclock --warn @SBINDIR@/openrc-run
 	fi
 	eend $?
 }

init.d/syscons.in

@@ -1,9 +1,9 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 depend() {
-	need localmount
+	need mount.usr mount.var
 	keyword -jail -prefix
 }
 

init.d/sysctl.BSD.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/sysctl.GNU-kFreeBSD.in

@@ -0,0 +1,31 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+depend()
+{
+	before bootmisc logger
+	keyword -prefix
+}
+
+start()
+{
+	[ -e /etc/sysctl.conf ] || return 0
+	local retval=0 var= comments= conf=
+	ebegin "Configuring kernel parameters"
+	eindent
+	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
+		if [ -r "$conf" ]; then
+			vebegin "applying $conf"
+			while read var comments; do
+				case "$var" in
+				""|"#"*) continue;;
+				esac
+				sysctl -w "$var" >/dev/null || retval=1
+			done < "$conf"
+			veend $retval
+		fi
+	done
+	eoutdent
+	eend $retval "Some errors were encountered"
+}

init.d/sysctl.GNU.in

@@ -0,0 +1,32 @@
+#!@PREFIX@/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+#FIXME: Modify for GNU/Hurd
+
+depend()
+{
+	before bootmisc logger
+	keyword -prefix
+}
+
+start()
+{
+	[ -e /etc/sysctl.conf ] || return 0
+	local retval=0 var= comments= conf=
+	ebegin "Configuring kernel parameters"
+	eindent
+	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
+		if [ -r "$conf" ]; then
+			vebegin "applying $conf"
+			while read var comments; do
+				case "$var" in
+				""|"#"*) continue;;
+				esac
+				sysctl -w "$var" >/dev/null || retval=1
+			done < "$conf"
+			veend $retval
+		fi
+	done
+	eoutdent
+	eend $retval "Some errors were encountered"
+}

init.d/sysctl.Linux.in

@@ -1,34 +1,19 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 depend()
 {
 	before bootmisc logger
-	keyword -lxc -prefix -vserver
+	keyword -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
-	local conf= retval=0 err errs
+	local quiet
+	yesno $rc_verbose || quiet=-q
 
 	ebegin "Configuring kernel parameters"
-	eindent
-
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
-			if ! err=$(sysctl -p "$conf" 2>&1 >/dev/null) ; then
-				errs="${errs} ${err}"
-				sysctl -e -p "${conf}" >/dev/null
-			fi
-			veend $? || retval=1
-		fi
-	done
-
-	eoutdent
-	if [ ${retval} -eq 0 ] && [ -n "${errs}" ] ; then
-		ewarn "Unknown keys:${errs}"
-	fi
-	eend $retval "Some errors were encountered: ${errs}"
+	sysctl ${quiet} --system
+	eend $? "Unable to configure some kernel parameters"
 }

init.d/sysfs.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -8,7 +8,7 @@ sysfs_opts=nodev,noexec,nosuid
 
 depend()
 {
-	keyword -lxc -prefix -vserver
+	keyword -lxc -prefix -systemd-nspawn -vserver
 }
 
 mount_sys()
@@ -82,6 +82,15 @@ mount_misc()
 		fi
 	fi
 
+	# Setup Kernel Support for SELinux
+	if [ -d /sys/fs/selinux ] && ! mountinfo -q /sys/fs/selinux; then
+		if grep -qs selinuxfs /proc/filesystems; then
+			ebegin "Mounting SELinux filesystem"
+			mount -t selinuxfs selinuxfs /sys/fs/selinux
+			eend $?
+		fi
+	fi
+
 	# setup up kernel support for efivarfs
 	# slightly complicated, as if it's build as a module but NOT yet loaded,
 	# it will NOT appear in /proc/filesystems yet
@@ -99,19 +108,22 @@ mount_misc()
 
 mount_cgroups()
 {
-		mountinfo -q /sys/fs/cgroup || return 0
+	mountinfo -q /sys/fs/cgroup || return 0
 
-	local agent="@LIBEXECDIR@/sh/cgroup-release-agent.sh"
-	mkdir /sys/fs/cgroup/openrc
-	mount -n -t cgroup \
-		-o none,${sysfs_opts},name=openrc,release_agent="$agent" \
-		openrc /sys/fs/cgroup/openrc
-	echo 1 > /sys/fs/cgroup/openrc/notify_on_release
+	if ! mountinfo -q /sys/fs/cgroup/openrc; then
+		local agent="@LIBEXECDIR@/sh/cgroup-release-agent.sh"
+		mkdir /sys/fs/cgroup/openrc
+		mount -n -t cgroup \
+			-o none,${sysfs_opts},name=openrc,release_agent="$agent" \
+			openrc /sys/fs/cgroup/openrc
+		echo 1 > /sys/fs/cgroup/openrc/notify_on_release
+	fi
 
 	yesno ${rc_controller_cgroups:-YES} && [ -e /proc/cgroups ] || return 0
 	while read name hier groups enabled rest; do
 		case "${enabled}" in
-			1)	mkdir /sys/fs/cgroup/${name}
+			1)	mountinfo -q /sys/fs/cgroup/${name} && continue
+				mkdir /sys/fs/cgroup/${name}
 				mount -n -t cgroup -o ${sysfs_opts},${name} \
 					${name} /sys/fs/cgroup/${name}
 				;;
@@ -119,18 +131,21 @@ mount_cgroups()
 	done < /proc/cgroups
 }
 
+restorecon_sys()
+{
+	if [ -x /sbin/restorecon ]; then
+		ebegin "Restoring SELinux contexts in /sys"
+		restorecon -F /sys/devices/system/cpu/online >/dev/null 2>&1
+		restorecon -rF /sys/fs/cgroup >/dev/null 2>&1
+		eend $?
+	fi
+}
+
 start()
 {
-	local retval
 	mount_sys
-	retval=$?
-	if [ $retval -eq 0 ]; then
-		mount_misc
-		retval=$?
-	fi
-	if [ $retval -eq 0 ]; then
-		mount_cgroups
-		retval=$?
-	fi
-	return $retval
+	mount_misc
+	mount_cgroups
+	restorecon_sys
+	return 0
 }

init.d/syslogd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -14,7 +14,7 @@ depend()
 {
 	provide logger
 	use net newsyslog
-	need localmount
+	need mount.usr mount.var
 	after bootmisc
 	keyword -prefix
 }

init.d/termencoding.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2008-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -9,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
-	keyword -lxc -openvz -prefix -uml -vserver -xenu
+	keyword -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 	use root
 	after bootmisc
 }

init.d/tmpfiles.dev.in

@@ -1,8 +1,8 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright 1999-2012 Gentoo Foundation
 # Released under the 2-clause BSD license.
 
-description="set up tmpfiles.d entries"
+description="Set up tmpfiles.d entries"
 
 depend()
 {
@@ -13,9 +13,8 @@ depend()
 
 start()
 {
-	ebegin "setting up tmpfiles.d entries for /dev"
-	@LIBEXECDIR@/sh/tmpfiles.sh --prefix=/dev --create --remove \
-		${tmpfiles_opts}
+	ebegin "Setting up tmpfiles.d entries for /dev"
+	@LIBEXECDIR@/sh/tmpfiles.sh --prefix=/dev --create --boot ${tmpfiles_opts}
 	eend $?
 	return 0
 }

init.d/tmpfiles.setup.in

@@ -1,18 +1,18 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright 1999-2012 Gentoo Foundation
 # Released under the 2-clause BSD license.
 
-description="set up tmpfiles.d entries"
+description="Set up tmpfiles.d entries"
 
 depend()
 {
-	need localmount
+	need mount.usr mount.var
 }
 
 start()
 {
-	ebegin "setting up tmpfiles.d entries"
-	@LIBEXECDIR@/sh/tmpfiles.sh --exclude-prefix=/dev --create --remove \
+	ebegin "Setting up tmpfiles.d entries"
+	@LIBEXECDIR@/sh/tmpfiles.sh --exclude-prefix=/dev --create --remove --boot \
 		${tmpfiles_opts}
 	eend $?
 	return 0

init.d/ttys.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/urandom.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,8 +7,8 @@ description="Initializes the random number generator."
 
 depend()
 {
-	need localmount
-	keyword -jail -lxc -openvz -prefix
+	need mount.usr mount.var
+	keyword -jail -lxc -openvz -prefix -systemd-nspawn
 }
 
 save_seed()