release openrc-0.6.7

Under normal conditions, runscript creates one child and waits for its
termination, which is signaled by a pipe write from the SIGCHLD
sighandler.

When running killprocs however more than one SIGHCLD signal is generated, at
least on all of my amd64 boxes running on real hardware and in vmware.

When the first SIGCHLD occurs svc_exec leaves the loop and closes the pipe.
Subsequent SIGCHLDs during the close can lead to a race condition and create an
EBADF error in the pipe write (pipe is closed but the file handle is still !=
-1).

We avoid this by blocking SIGHCHLD during the pipe close.

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.6.1
+VERSION=	0.6.7
 PKG=		${NAME}-${VERSION}

etc/rc.conf.in

@@ -11,7 +11,8 @@
 
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
-# this feature.
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
 #rc_interactive="YES"
 
 # If we need to drop to a shell, you can specify it here.
@@ -75,8 +76,14 @@
 # Set unicode to YES to turn on unicode support for keyboards and screens.
 #unicode="NO"
 
-# Network fstypes. Below is the default.
-net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs nfs nfs4 ocfs2 shfs smbfs"
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
 
 ##############################################################################
 # SERVICE CONFIGURATION VARIABLES

init.d/bootmisc.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	need localmount
 	before logger
 	after clock sysctl
@@ -36,6 +35,12 @@ cleanup_tmp_dir()
 		# Faster than find
 		rm -rf -- [^ajlq\.]*
 
+		# pam_mktemp creates a .private directory within which
+		# each user gets a private directory with immutable
+		# bit set; remove the immutable bit before trying to
+		# remove it.
+		[ -d /tmp/.private ] && chattr -R -a /tmp/.private 2> /dev/null
+
 		find $startopts ! -name . \
 			! -path "./lost+found" \
 			! -path "./lost+found/*" \
@@ -49,8 +54,6 @@ cleanup_tmp_dir()
 			! -path "./aquota.group/*" \
 			! -path "./journal" \
 			! -path "./journal/*" \
-			! -path "./.private" \
-			! -path "./.private/*" \
 			-exec rm -rf {} \;
 		eend 0
 	else

init.d/local.in

@@ -18,11 +18,6 @@ start()
 		local_start
 	fi
 
-	# Support old configs
-	if [ -e @SYSCONFDIR@/conf.d/local.start ]; then
-		. @SYSCONFDIR@/conf.d/local.start
-	fi
-
 	eend $? "Failed to start local"
 }
 
@@ -34,10 +29,5 @@ stop()
 		local_stop
 	fi
 
-	# Support old configs
-	if [ -e @SYSCONFDIR@/conf.d/local.stop ]; then
-		. @SYSCONFDIR@/conf.d/local.stop
-	fi
-
 	eend $? "Failed to stop local"
 }

init.d/localmount.in

@@ -14,13 +14,16 @@ depend()
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local types="noproc" x=
+	local types="noproc" x= no_netdev=
 	for x in $net_fs_list; do
 		types="${types},${x}"
 	done
 
+	if [ "$RC_UNAME" = Linux ]; then
+		no_netdev="-O no_netdev"
+	fi
 	ebegin "Mounting local filesystems"
-	mount -at "$types"
+	mount -at "$types" $no_netdev
 	eend $? "Some local filesystem failed to mount"
 
 	# Always return 0 - some local mounts may not be critical for boot

init.d/sysctl.BSD.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	before bootmisc logger
 	keyword -prefix
 }

init.d/sysctl.Linux.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	before bootmisc logger
 	keyword -openvz -prefix -vserver
 }

net/bonding.sh

@@ -46,12 +46,27 @@ bonding_pre_start()
 		return 1
 	fi
 
-	# Configure the bond.
-	# Nice and dynamic :)
+	# Interface must be down in order to configure
+	_down
+
+	# Configure the bond mode, then we can reloop to ensure we configure
+	# All other options
+	for x in /sys/class/net/"${IFACE}"/bonding/mode; do
+		[ -f "${x}" ] || continue
+		n=${x##*/}
+		eval s=\$${n}_${IFVAR}
+		if [ -n "${s}" ]; then
+			einfo "Setting ${n}: ${s}"
+			echo "${s}" >"${x}" || \
+			eerror "Failed to configure $n (${n}_${IFVAR})"
+		fi
+	done
+	# Nice and dynamic for remaining options:)
 	for x in /sys/class/net/"${IFACE}"/bonding/*; do
 		[ -f "${x}" ] || continue
 		n=${x##*/}
 		eval s=\$${n}_${IFVAR}
+		[ "${n}" != "mode" ] || continue
 		if [ -n "${s}" ]; then
 			einfo "Setting ${n}: ${s}"
 			echo "${s}" >"${x}" || \

net/vlan.sh

@@ -20,7 +20,7 @@ _is_vlan()
 _get_vlans()
 {
 	[ -e /proc/net/vlan/config ] || return 1
-	sed -n -e 's/^\(.*[0-9]\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
+	sed -n -e 's/^\W*\([^ ]*\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
 }
 
 _check_vlan()

pkgconfig/Makefile

@@ -2,7 +2,8 @@ DIR=	${LIBDIR}/pkgconfig
 SRCS=	einfo.pc.in openrc.pc.in
 INC=	einfo.pc openrc.pc
 
-sed -n -e 's/^VERSION=[[:space:]]*\([^[:space:]]*\).*/#define VERSION "\1${GITVER}\"/p' ../../Makefile > version.h
+.DEFAULT:
+	${SED} -n -e 's/^VERSION=[[:space:]]*\([^[:space:]]*\).*/#define VERSION "\1${GITVER}\"/p' ../../Makefile > version.h
 
 SED_EXTRA=	-e 's:@VERSION@:${VERSION}:g'
 

sh/init-early.sh.Linux.in

@@ -17,7 +17,7 @@ fi
 if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/consolefont \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/consolefont ]; then
 	printf "\033%s" "$termencoding" >"$CONSOLE" 2>/dev/null
-	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /bin/setfont ]; then
+	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /usr/bin/setfont ]; then
 		font="$(cat "$RC_LIBEXECDIR"/console/font)"
 		[ -c "$CONSOLE" ] && cons="-C $CONSOLE"
 		setfont $cons "$RC_LIBEXECDIR"/console/"$font" 2>/dev/null
@@ -29,7 +29,7 @@ if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/keymaps \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/keymaps ]; then
 	kbd_mode $kmode -C "$CONSOLE" 2>/dev/null
 	if [ -r "$RC_LIBEXECDIR"/console/keymap ]; then
-		loadkeys "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
+		loadkeys -q "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
 	fi
 fi
 

sh/rc-functions.sh.in

@@ -38,7 +38,8 @@ stop_addon()
 	( import_addon "$1-stop" )
 }
 
-net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
+net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre
+ncpfs nfs nfs4 ocfs2 shfs smbfs $extra_net_fs_list"
 is_net_fs()
 {
 	[ -z "$1" ] && return 1

sh/rc-mount.sh

@@ -26,6 +26,8 @@ do_unmount()
 		# Unmounting a shared mount can unmount other mounts, so
 		# we need to check the mount is still valid
 		mountinfo --quiet "$mnt" || continue
+		# Ensure we interpret all characters properly.
+		mnt=$(printf "$mnt")
 
 		case "$cmd" in
 			umount)

src/rc/runscript.c

@@ -350,6 +350,8 @@ svc_exec(const char *arg1, const char *arg2)
 	size_t bytes;
 	bool prefixed = false;
 	int slave_tty;
+	sigset_t sigchldmask;
+	sigset_t oldmask;
 
 	/* Setup our signal pipe */
 	if (pipe(signal_pipe) == -1)
@@ -439,10 +441,17 @@ svc_exec(const char *arg1, const char *arg2)
 	}
 
 	free(buffer);
+
+	sigemptyset (&sigchldmask);
+	sigaddset (&sigchldmask, SIGCHLD);
+	sigprocmask (SIG_BLOCK, &sigchldmask, &oldmask);
+
 	close(signal_pipe[0]);
 	close(signal_pipe[1]);
 	signal_pipe[0] = signal_pipe[1] = -1;
 
+	sigprocmask (SIG_SETMASK, &oldmask, NULL);
+	
 	if (master_tty >= 0) {
 		/* Why did we do this? */
 		/* signal (SIGWINCH, SIG_IGN); */